Adapting Nepal's polio eradication programme.

PubMed

Paudel, Krishna P; Hampton, Lee M; Gurung, Santosh; Bohara, Rajendra; Rai, Indra K; Anaokar, Sameer; Swift, Rachel D; Cochi, Stephen

2017-03-01

Many countries have weak disease surveillance and immunization systems. The elimination of polio creates an opportunity to use staff and assets from the polio eradication programme to control other vaccine-preventable diseases and improve disease surveillance and immunization systems. In 2003, the active surveillance system of Nepal's polio eradication programme began to report on measles and neonatal tetanus cases. Japanese encephalitis and rubella cases were added to the surveillance system in 2004. Staff from the programme aided the development and implementation of government immunization policies, helped launch vaccination campaigns, and trained government staff in reporting practices and vaccine management. Nepal eliminated indigenous polio in 2000, and controlled outbreaks caused by polio importations between 2005 and 2010. In 2014, the surveillance activities had expanded to 299 sites, with active surveillance for measles, rubella and neonatal tetanus, including weekly visits from 15 surveillance medical officers. Sentinel surveillance for Japanese encephalitis consisted of 132 sites. Since 2002, staff from the eradication programme have helped to introduce six new vaccines and helped to secure funding from Gavi, the Vaccine Alliance. Staff have also assisted in responding to other health events in the country. By expanding the activities of its polio eradication programme, Nepal has improved its surveillance and immunization systems and increased vaccination coverage of other vaccine-preventable diseases. Continued donor support, a close collaboration with the Expanded Programme on Immunization, and the retention of the polio eradication programme's skilled workforce were important for this expansion.

Analysis of how the health systems context shapes responses to the control of human immunodeficiency virus: case-studies from the Russian Federation.

PubMed Central

Atun, Rifat A.; McKee, Martin; Drobniewski, Francis; Coker, Richard

2005-01-01

OBJECTIVE: To develop a methodology and an instrument that allow the simultaneous rapid and systematic examination of the broad public health context, the health care systems, and the features of disease-specific programmes. METHODS: Drawing on methodologies used for rapid situational assessments of vertical programmes for tackling communicable disease, we analysed programmes for the control human of immunodeficiency virus (HIV) and their health systems context in three regions in the Russian Federation. The analysis was conducted in three phases: first, analysis of published literature, documents and routine data from the regions; second, interviews with key informants, and third, further data collection and analysis. Synthesis of findings through exploration of emergent themes, with iteration, resulted in the identification of the key systems issues that influenced programme delivery. FINDINGS: We observed a complex political economy within which efforts to control HIV sit, an intricate legal environment, and a high degree of decentralization of financing and operational responsibility. Although each region displays some commonalities arising from the Soviet traditions of public health control, there are considerable variations in the epidemiological trajectories, cultural responses, the political environment, financing, organization and service delivery, and the extent of multisectoral work in response to HIV epidemics. CONCLUSION: Within a centralized, post-Soviet health system, centrally directed measures to enhance HIV control may have varying degrees of impact at the regional level. Although the central tenets of effective vertical HIV programmes may be present, local imperatives substantially influence their interpretation, operationalization and effectiveness. Systematic analysis of the context within which vertical programmes are embedded is necessary to enhance understanding of how the relevant policies are prioritized and translated to action. PMID:16283049

Effects of Honours Programme Participation in Higher Education: A Propensity Score Matching Approach

ERIC Educational Resources Information Center

Kool, Ada; Mainhard, Tim; Jaarsma, Debbie; van Beukelen, Peter; Brekelmans, Mieke

2017-01-01

Honours programmes have become part of higher education systems around the globe, and an increasing number of students are enrolled in such programmes. So far, effects of these programmes are largely under-researched. Two gaps in previous research on the effects of such programmes were addressed: (1) most studies lack a comparable control group of…

FPGA-based multiprocessor system for injection molding control.

PubMed

Muñoz-Barron, Benigno; Morales-Velazquez, Luis; Romero-Troncoso, Rene J; Rodriguez-Donate, Carlos; Trejo-Hernandez, Miguel; Benitez-Rangel, Juan P; Osornio-Rios, Roque A

2012-10-18

The plastic industry is a very important manufacturing sector and injection molding is a widely used forming method in that industry. The contribution of this work is the development of a strategy to retrofit control of an injection molding machine based on an embedded system microprocessors sensor network on a field programmable gate array (FPGA) device. Six types of embedded processors are included in the system: a smart-sensor processor, a micro fuzzy logic controller, a programmable logic controller, a system manager, an IO processor and a communication processor. Temperature, pressure and position are controlled by the proposed system and experimentation results show its feasibility and robustness. As validation of the present work, a particular sample was successfully injected.

75 FR 72822 - Nationwide Categorical Waivers Under Section 1605 (Buy American) of the American Recovery and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-26

... a temperature range of 15-55 degrees Fahrenheit and manual reset; (4) Programmable DDC controllers... manual reset; (4) Programmable DDC controllers for LON protocol, where an existing LON system exists that...

Program For A Pushbutton Display

NASA Technical Reports Server (NTRS)

Busquets, Anthony M.; Luck, William S., Jr.

1989-01-01

Programmable Display Pushbutton (PDP) is pushbutton device available from Micro Switch having programmable 16X35 matrix of light-emitting diodes on pushbutton surface. Any desired legends display on PDP's, producing user-friendly applications reducing need for dedicated manual controls. Interacts with operator, calls for correct response before transmitting next message. Both simple manual control and sophisticated programmable link between operator and host system. Programmable Display Pushbutton Legend Editor (PDPE) computer program used to create light-emitting-diode (LED) displays for pushbuttons. Written in FORTRAN.

Programming Programmable Logic Controller. High-Technology Training Module.

ERIC Educational Resources Information Center

Lipsky, Kevin

This training module on programming programmable logic controllers (PLC) is part of the memory structure and programming unit used in a packaging systems equipment control course. In the course, students assemble, install, maintain, and repair industrial machinery used in industry. The module contains description, objectives, content outline,…

Introducing new diagnostics into STI control programmes: the importance of programme science.

PubMed

Peeling, Rosanna W; Mabey, David; Ballard, Ronald C

2013-03-01

Many innovative diagnostic technologies will become commercially available over the next 5-10 years. These tests can potentially transform the diagnosis of sexually transmitted infections but their introduction into control programmes can be hampered by health system constraints, and political, cultural, socioeconomic and behavioural factors. We used the introduction of syphilis rapid tests to illustrate the importance of programme science to address the gap between accruing evidence of acceptable test performance and the complexity of programme design, implementation and evaluation of test deployment to address public health needs and improve patient-important outcomes.

Communicable disease control programmes and health systems: an analytical approach to sustainability.

PubMed

Shigayeva, Altynay; Coker, Richard J

2015-04-01

There is renewed concern over the sustainability of disease control programmes, and re-emergence of policy recommendations to integrate programmes with general health systems. However, the conceptualization of this issue has remarkably received little critical attention. Additionally, the study of programmatic sustainability presents methodological challenges. In this article, we propose a conceptual framework to support analyses of sustainability of communicable disease programmes. Through this work, we also aim to clarify a link between notions of integration and sustainability. As a part of development of the conceptual framework, we conducted a systematic literature review of peer-reviewed literature on concepts, definitions, analytical approaches and empirical studies on sustainability in health systems. Identified conceptual proposals for analysis of sustainability in health systems lack an explicit conceptualization of what a health system is. Drawing upon theoretical concepts originating in sustainability sciences and our review here, we conceptualize a communicable disease programme as a component of a health system which is viewed as a complex adaptive system. We propose five programmatic characteristics that may explain a potential for sustainability: leadership, capacity, interactions (notions of integration), flexibility/adaptability and performance. Though integration of elements of a programme with other system components is important, its role in sustainability is context specific and difficult to predict. The proposed framework might serve as a basis for further empirical evaluations in understanding complex interplay between programmes and broader health systems in the development of sustainable responses to communicable diseases. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine © The Author 2014; all rights reserved.

A simple laser locking system based on a field-programmable gate array.

PubMed

Jørgensen, N B; Birkmose, D; Trelborg, K; Wacker, L; Winter, N; Hilliard, A J; Bason, M G; Arlt, J J

2016-07-01

Frequency stabilization of laser light is crucial in both scientific and industrial applications. Technological developments now allow analog laser stabilization systems to be replaced with digital electronics such as field-programmable gate arrays, which have recently been utilized to develop such locking systems. We have developed a frequency stabilization system based on a field-programmable gate array, with emphasis on hardware simplicity, which offers a user-friendly alternative to commercial and previous home-built solutions. Frequency modulation, lock-in detection, and a proportional-integral-derivative controller are programmed on the field-programmable gate array and only minimal additional components are required to frequency stabilize a laser. The locking system is administered from a host-computer which provides comprehensive, long-distance control through a versatile interface. Various measurements were performed to characterize the system. The linewidth of the locked laser was measured to be 0.7 ± 0.1 MHz with a settling time of 10 ms. The system can thus fully match laser systems currently in use for atom trapping and cooling applications.

A simple laser locking system based on a field-programmable gate array

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jørgensen, N. B.; Birkmose, D.; Trelborg, K.

Frequency stabilization of laser light is crucial in both scientific and industrial applications. Technological developments now allow analog laser stabilization systems to be replaced with digital electronics such as field-programmable gate arrays, which have recently been utilized to develop such locking systems. We have developed a frequency stabilization system based on a field-programmable gate array, with emphasis on hardware simplicity, which offers a user-friendly alternative to commercial and previous home-built solutions. Frequency modulation, lock-in detection, and a proportional-integral-derivative controller are programmed on the field-programmable gate array and only minimal additional components are required to frequency stabilize a laser. The lockingmore » system is administered from a host-computer which provides comprehensive, long-distance control through a versatile interface. Various measurements were performed to characterize the system. The linewidth of the locked laser was measured to be 0.7 ± 0.1 MHz with a settling time of 10 ms. The system can thus fully match laser systems currently in use for atom trapping and cooling applications.« less

A programmable controller based on CAN field bus embedded microprocessor and FPGA

NASA Astrophysics Data System (ADS)

Cai, Qizhong; Guo, Yifeng; Chen, Wenhei; Wang, Mingtao

2008-10-01

One kind of new programmable controller(PLC) is introduced in this paper. The advanced embedded microprocessor and Field-Programmable Gate Array (FPGA) device are applied in the PLC system. The PLC system structure was presented in this paper. It includes 32 bits Advanced RISC Machines (ARM) embedded microprocessor as control core, FPGA as control arithmetic coprocessor and CAN bus as data communication criteria protocol connected the host controller and its various extension modules. It is detailed given that the circuits and working principle, IiO interface circuit between ARM and FPGA and interface circuit between ARM and FPGA coprocessor. Furthermore the interface circuit diagrams between various modules are written. In addition, it is introduced that ladder chart program how to control the transfer info of control arithmetic part in FPGA coprocessor. The PLC, through nearly two months of operation to meet the design of the basic requirements.

FPGA-Based Multiprocessor System for Injection Molding Control

PubMed Central

Muñoz-Barron, Benigno; Morales-Velazquez, Luis; Romero-Troncoso, Rene J.; Rodriguez-Donate, Carlos; Trejo-Hernandez, Miguel; Benitez-Rangel, Juan P.; Osornio-Rios, Roque A.

2012-01-01

The plastic industry is a very important manufacturing sector and injection molding is a widely used forming method in that industry. The contribution of this work is the development of a strategy to retrofit control of an injection molding machine based on an embedded system microprocessors sensor network on a field programmable gate array (FPGA) device. Six types of embedded processors are included in the system: a smart-sensor processor, a micro fuzzy logic controller, a programmable logic controller, a system manager, an IO processor and a communication processor. Temperature, pressure and position are controlled by the proposed system and experimentation results show its feasibility and robustness. As validation of the present work, a particular sample was successfully injected. PMID:23202036

Programmable Automated Welding System (PAWS)

NASA Technical Reports Server (NTRS)

Kline, Martin D.

1994-01-01

An ambitious project to develop an advanced, automated welding system is being funded as part of the Navy Joining Center with Babcock & Wilcox as the prime integrator. This program, the Programmable Automated Welding System (PAWS), involves the integration of both planning and real-time control activities. Planning functions include the development of a graphical decision support system within a standard, portable environment. Real-time control functions include the development of a modular, intelligent, real-time control system and the integration of a number of welding process sensors. This paper presents each of these components of the PAWS and discusses how they can be utilized to automate the welding operation.

Relay Protection and Automation Systems Based on Programmable Logic Integrated Circuits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lashin, A. V., E-mail: LashinAV@lhp.ru; Kozyrev, A. V.

One of the most promising forms of developing the apparatus part of relay protection and automation devices is considered. The advantages of choosing programmable logic integrated circuits to obtain adaptive technological algorithms in power system protection and control systems are pointed out. The technical difficulties in the problems which today stand in the way of using relay protection and automation systems are indicated and a new technology for solving these problems is presented. Particular attention is devoted to the possibility of reconfiguring the logic of these devices, using programmable logic integrated circuits.

Data acquisition and control system with a programmable logic controller (PLC) for a pulsed chemical oxygen-iodine laser

NASA Astrophysics Data System (ADS)

Yu, Haijun; Li, Guofu; Duo, Liping; Jin, Yuqi; Wang, Jian; Sang, Fengting; Kang, Yuanfu; Li, Liucheng; Wang, Yuanhu; Tang, Shukai; Yu, Hongliang

2015-02-01

A user-friendly data acquisition and control system (DACS) for a pulsed chemical oxygen -iodine laser (PCOIL) has been developed. It is implemented by an industrial control computer，a PLC, and a distributed input/output (I/O) module, as well as the valve and transmitter. The system is capable of handling 200 analogue/digital channels for performing various operations such as on-line acquisition, display, safety measures and control of various valves. These operations are controlled either by control switches configured on a PC while not running or by a pre-determined sequence or timings during the run. The system is capable of real-time acquisition and on-line estimation of important diagnostic parameters for optimization of a PCOIL. The DACS system has been programmed using software programmable logic controller (PLC). Using this DACS, more than 200 runs were given performed successfully.

Shuttle cryogenics supply system optimization study. Volume 5, B-3, part 2: Appendix to programmers manual for math model

NASA Technical Reports Server (NTRS)

1973-01-01

A computer programmer's manual for a digital computer which will permit rapid and accurate parametric analysis of current and advanced attitude control propulsion systems is presented. The concept is for a cold helium pressurized, subcritical cryogen fluid supplied, bipropellant gas-fed attitude control propulsion system. The cryogen fluids are stored as liquids under low pressure and temperature conditions. The mathematical model provides a generalized form for the procedural technique employed in setting up the analysis program.

Programmable Low-Voltage Circuit Breaker and Tester

NASA Technical Reports Server (NTRS)

Greenfield, Terry

2008-01-01

An instrumentation system that would comprise a remotely controllable and programmable low-voltage circuit breaker plus several electric-circuit-testing subsystems has been conceived, originally for use aboard a spacecraft during all phases of operation from pre-launch testing through launch, ascent, orbit, descent, and landing. The system could also be adapted to similar use aboard aircraft. In comparison with remotely controllable circuit breakers heretofore commercially available, this system would be smaller, less massive, and capable of performing more functions, as needed for aerospace applications.

A real-time sub-μrad laser beam tracking system

NASA Astrophysics Data System (ADS)

Buske, Ivo; Schragner, Ralph; Riede, Wolfgang

2007-10-01

We present a rugged and reliable real-time laser beam tracking system operating with a high speed, high resolution piezo-electric tip/tilt mirror. Characteristics of the piezo mirror and position sensor are investigated. An industrial programmable automation controller is used to develop a real-time digital PID controller. The controller provides a one million field programmable gate array (FPGA) to realize a high closed-loop frequency of 50 kHz. Beam tracking with a root-mean-squared accuracy better than 0.15 μrad has been laboratory confirmed. The system is intended as an add-on module for established mechanical mrad tracking systems.

Functional safety for the Advanced Technology Solar Telescope

NASA Astrophysics Data System (ADS)

Bulau, Scott; Williams, Timothy R.

2012-09-01

Since inception, the Advanced Technology Solar Telescope (ATST) has planned to implement a facility-wide functional safety system to protect personnel from harm and prevent damage to the facility or environment. The ATST will deploy an integrated safety-related control system (SRCS) to achieve functional safety throughout the facility rather than relying on individual facility subsystems to provide safety functions on an ad hoc basis. The Global Interlock System (GIS) is an independent, distributed, facility-wide, safety-related control system, comprised of commercial off-the-shelf (COTS) programmable controllers that monitor, evaluate, and control hazardous energy and conditions throughout the facility that arise during operation and maintenance. The GIS has been designed to utilize recent advances in technology for functional safety plus revised national and international standards that allow for a distributed architecture using programmable controllers over a local area network instead of traditional hard-wired safety functions, while providing an equivalent or even greater level of safety. Programmable controllers provide an ideal platform for controlling the often complex interrelationships between subsystems in a modern astronomical facility, such as the ATST. A large, complex hard-wired relay control system is no longer needed. This type of system also offers greater flexibility during development and integration in addition to providing for expanded capability into the future. The GIS features fault detection, self-diagnostics, and redundant communications that will lead to decreased maintenance time and increased availability of the facility.

A programmable and portable NMES device for drop foot correction and blood flow assist applications.

PubMed

Breen, Paul P; Corley, Gavin J; O'Keeffe, Derek T; Conway, Richard; Olaighin, Gearóid

2009-04-01

The Duo-STIM, a new, programmable and portable neuromuscular stimulation system for drop foot correction and blood flow assist applications is presented. The system consists of a programmer unit and a portable, programmable stimulator unit. The portable stimulator features fully programmable, sensor-controlled, constant-voltage, dual-channel stimulation and accommodates a range of customized stimulation profiles. Trapezoidal and free-form adaptive stimulation intensity envelope algorithms are provided for drop foot correction applications, while time dependent and activity dependent algorithms are provided for blood flow assist applications. A variety of sensor types can be used with the portable unit, including force sensitive resistor-based foot switches and MEMS-based accelerometer and gyroscope devices. The paper provides a detailed description of the hardware and block-level system design for both units. The programming and operating procedures for the system are also presented. Finally, functional bench test results for the system are presented.

A programmable and portable NMES device for drop foot correction and blood flow assist applications.

PubMed

Breen, Paul P; Corley, Gavin J; O'Keeffe, Derek T; Conway, Richard; OLaighin, Gearoid

2007-01-01

The Duo-STIM, a new, programmable and portable neuromuscular stimulation system for drop foot correction and blood flow assist applications is presented. The system consists of a programmer unit and a portable, programmable stimulator unit. The portable stimulator features fully programmable, sensor-controlled, constant-voltage, dual-channel stimulation and accommodates a range of customized stimulation profiles. Trapezoidal and free-form adaptive stimulation intensity envelope algorithms are provided for drop foot correction applications, while time dependent and activity dependent algorithms are provided for blood flow assist applications. A variety of sensor types can be used with the portable unit, including force sensitive resistor based foot switches and NMES based accelerometer and gyroscope devices. The paper provides a detailed description of the hardware and block-level system design for both units. The programming and operating procedures for the system are also presented. Finally, functional bench test results for the system are presented.

Transmission-Type 2-Bit Programmable Metasurface for Single-Sensor and Single-Frequency Microwave Imaging

PubMed Central

Li, Yun Bo; Li, Lian Lin; Xu, Bai Bing; Wu, Wei; Wu, Rui Yuan; Wan, Xiang; Cheng, Qiang; Cui, Tie Jun

2016-01-01

The programmable and digital metamaterials or metasurfaces presented recently have huge potentials in designing real-time-controlled electromagnetic devices. Here, we propose the first transmission-type 2-bit programmable coding metasurface for single-sensor and single- frequency imaging in the microwave frequency. Compared with the existing single-sensor imagers composed of active spatial modulators with their units controlled independently, we introduce randomly programmable metasurface to transform the masks of modulators, in which their rows and columns are controlled simultaneously so that the complexity and cost of the imaging system can be reduced drastically. Different from the single-sensor approach using the frequency agility, the proposed imaging system makes use of variable modulators under single frequency, which can avoid the object dispersion. In order to realize the transmission-type 2-bit programmable metasurface, we propose a two-layer binary coding unit, which is convenient for changing the voltages in rows and columns to switch the diodes in the top and bottom layers, respectively. In our imaging measurements, we generate the random codes by computer to achieve different transmission patterns, which can support enough multiple modes to solve the inverse-scattering problem in the single-sensor imaging. Simple experimental results are presented in the microwave frequency, validating our new single-sensor and single-frequency imaging system. PMID:27025907

Transmission-Type 2-Bit Programmable Metasurface for Single-Sensor and Single-Frequency Microwave Imaging.

PubMed

Li, Yun Bo; Li, Lian Lin; Xu, Bai Bing; Wu, Wei; Wu, Rui Yuan; Wan, Xiang; Cheng, Qiang; Cui, Tie Jun

2016-03-30

The programmable and digital metamaterials or metasurfaces presented recently have huge potentials in designing real-time-controlled electromagnetic devices. Here, we propose the first transmission-type 2-bit programmable coding metasurface for single-sensor and single- frequency imaging in the microwave frequency. Compared with the existing single-sensor imagers composed of active spatial modulators with their units controlled independently, we introduce randomly programmable metasurface to transform the masks of modulators, in which their rows and columns are controlled simultaneously so that the complexity and cost of the imaging system can be reduced drastically. Different from the single-sensor approach using the frequency agility, the proposed imaging system makes use of variable modulators under single frequency, which can avoid the object dispersion. In order to realize the transmission-type 2-bit programmable metasurface, we propose a two-layer binary coding unit, which is convenient for changing the voltages in rows and columns to switch the diodes in the top and bottom layers, respectively. In our imaging measurements, we generate the random codes by computer to achieve different transmission patterns, which can support enough multiple modes to solve the inverse-scattering problem in the single-sensor imaging. Simple experimental results are presented in the microwave frequency, validating our new single-sensor and single-frequency imaging system.

High-speed multi-frame dynamic transmission electron microscope image acquisition system with arbitrary timing

DOEpatents

Reed, Bryan W.; DeHope, William J.; Huete, Glenn; LaGrange, Thomas B.; Shuttlesworth, Richard M.

2016-02-23

An electron microscope is disclosed which has a laser-driven photocathode and an arbitrary waveform generator (AWG) laser system ("laser"). The laser produces a train of temporally-shaped laser pulses each being of a programmable pulse duration, and directs the laser pulses to the laser-driven photocathode to produce a train of electron pulses. An image sensor is used along with a deflector subsystem. The deflector subsystem is arranged downstream of the target but upstream of the image sensor, and has a plurality of plates. A control system having a digital sequencer controls the laser and a plurality of switching components, synchronized with the laser, to independently control excitation of each one of the deflector plates. This allows each electron pulse to be directed to a different portion of the image sensor, as well as to enable programmable pulse durations and programmable inter-pulse spacings.

A tool box for operational mosquito larval control: preliminary results and early lessons from the Urban Malaria Control Programme in Dar es Salaam, Tanzania

PubMed Central

Fillinger, Ulrike; Kannady, Khadija; William, George; Vanek, Michael J; Dongus, Stefan; Nyika, Dickson; Geissbühler, Yvonne; Chaki, Prosper P; Govella, Nico J; Mathenge, Evan M; Singer, Burton H; Mshinda, Hassan; Lindsay, Steven W; Tanner, Marcel; Mtasiwa, Deo; de Castro, Marcia C; Killeen, Gerry F

2008-01-01

Background As the population of Africa rapidly urbanizes, large populations could be protected from malaria by controlling aquatic stages of mosquitoes if cost-effective and scalable implementation systems can be designed. Methods A recently initiated Urban Malaria Control Programme in Dar es Salaam delegates responsibility for routine mosquito control and surveillance to modestly-paid community members, known as Community-Owned Resource Persons (CORPs). New vector surveillance, larviciding and management systems were designed and evaluated in 15 city wards to allow timely collection, interpretation and reaction to entomologic monitoring data using practical procedures that rely on minimal technology. After one year of baseline data collection, operational larviciding with Bacillus thuringiensis var. israelensis commenced in March 2006 in three selected wards. Results The procedures and staff management systems described greatly improved standards of larval surveillance relative to that reported at the outset of this programme. In the first year of the programme, over 65,000 potential Anopheles habitats were surveyed by 90 CORPs on a weekly basis. Reaction times to vector surveillance at observations were one day, week and month at ward, municipal and city levels, respectively. One year of community-based larviciding reduced transmission by the primary malaria vector, Anopheles gambiae s.l., by 31% (95% C.I. = 21.6–37.6%; p = 0.04). Conclusion This novel management, monitoring and evaluation system for implementing routine larviciding of malaria vectors in African cities has shown considerable potential for sustained, rapidly responsive, data-driven and affordable application. Nevertheless, the true programmatic value of larviciding in urban Africa can only be established through longer-term programmes which are stably financed and allow the operational teams and management infrastructures to mature by learning from experience. PMID:18218148

A low power flash-FPGA based brain implant micro-system of PID control.

PubMed

Lijuan Xia; Fattah, Nabeel; Soltan, Ahmed; Jackson, Andrew; Chester, Graeme; Degenaar, Patrick

2017-07-01

In this paper, we demonstrate that a low power flash FPGA based micro-system can provide a low power programmable interface for closed-loop brain implant inter- faces. The proposed micro-system receives recording local field potential (LFP) signals from an implanted probe, performs closed-loop control using a first order control system, then converts the signal into an optogenetic control stimulus pattern. Stimulus can be implemented through optoelectronic probes. The long term target is for both fundamental neuroscience applications and for clinical use in treating epilepsy. Utilizing our device, closed-loop processing consumes only 14nJ of power per PID cycle compared to 1.52μJ per cycle for a micro-controller implementation. Compared to an application specific digital integrated circuit, flash FPGA's are inherently programmable.

Programmable immersive peripheral environmental system (PIPES): a prototype control system for environmental feedback devices

NASA Astrophysics Data System (ADS)

Frend, Chauncey; Boyles, Michael

2015-03-01

This paper describes an environmental feedback device (EFD) control system aimed at simplifying the VR development cycle. Programmable Immersive Peripheral Environmental System (PIPES) affords VR developers a custom approach to programming and controlling EFD behaviors while relaxing the required knowledge and expertise of electronic systems. PIPES has been implemented for the Unity engine and features EFD control using the Arduino integrated development environment. PIPES was installed and tested on two VR systems, a large format CAVE system and an Oculus Rift HMD system. A photocell based end-to-end latency experiment was conducted to measure latency within the system. This work extends previously unpublished prototypes of a similar design. Development and experiments described in this paper are part of the VR community goal to understand and apply environment effects to VEs that ultimately add to users' perceived presence.

Implementation of a robotic flexible assembly system

NASA Technical Reports Server (NTRS)

Benton, Ronald C.

1987-01-01

As part of the Intelligent Task Automation program, a team developed enabling technologies for programmable, sensory controlled manipulation in unstructured environments. These technologies include 2-D/3-D vision sensing and understanding, force sensing and high speed force control, 2.5-D vision alignment and control, and multiple processor architectures. The subsequent design of a flexible, programmable, sensor controlled robotic assembly system for small electromechanical devices is described using these technologies and ongoing implementation and integration efforts. Using vision, the system picks parts dumped randomly in a tray. Using vision and force control, it performs high speed part mating, in-process monitoring/verification of expected results and autonomous recovery from some errors. It is programmed off line with semiautomatic action planning.

[Life support of the Mars exploration crew. Control of a zeolite system for carbon dioxide removal from space cabin air within a closed air regeneration cycle].

PubMed

Chekov, Iu F

2009-01-01

The author describes a zeolite system for carbon dioxide removal integrated into a closed air regeneration cycle aboard spacecraft. The continuous operation of a double-adsorbent regeneration system with pCO2-dependable productivity is maintained through programmable setting of adsorption (desorption) semicycle time. The optimal system regulation curve is presented within the space of statistical performance family obtained in quasi-steady operating modes with controlled parameters of the recurrent adsorption-desorption cycle. The automatically changing system productivity ensures continuous intake of concentrated CO2. Control of the adsorption-desorption process is based on calculation of the differential adsorption (desorption) heat from gradient of adsorbent and test inert substance temperatures. The adaptive algorithm of digital control is implemented through the standard spacecraft interface with the board computer system and programmable microprocessor-based controllers.

Fuzz Testing of Industrial Network Protocols in Programmable Logic Controllers

DTIC Science & Technology

2017-12-01

PLCs) are vital components in these cyber-physical systems. The industrial network protocols used to communicate between nodes in a control network...AB/RA) MicroLogix 1100 PLC through its implementation of EtherNet/IP, Common Industrial Protocol (CIP), and Programmable Controller Communication ...Commands (PCCC) communication protocols. This research also examines whether cross-generational vulnerabilities exist in the more advanced AB/RA

Advanced Ground Systems Maintenance Cryogenics Test Lab Control System Upgrade Project

NASA Technical Reports Server (NTRS)

Harp, Janice Leshay

2014-01-01

This project will outfit the Simulated Propellant Loading System (SPLS) at KSC's Cryogenics Test Laboratory with a new programmable logic control system. The control system upgrade enables the Advanced Ground Systems Maintenace Element Integration Team and other users of the SPLS to conduct testing in a controls environment similar to that used at the launch pad.

Thermal monitoring, measurement, and control system for a Volatile Condensable Materials (VCM) test apparatus

NASA Technical Reports Server (NTRS)

Ives, R. E.

1982-01-01

A thermal monitoring and control concept is described for a volatile condensable materials (VCM) test apparatus where electric resistance heaters are employed. The technique is computer based, but requires only proportioning ON/OFF relay control signals supplied through a programmable scanner and simple quadrac power controllers. System uniqueness is derived from automatic temperature measurements and the averaging of these measurements in discrete overlapping temperature zones. Overall control tolerance proves to be better than + or - 0.5 C from room ambient temperature to 150 C. Using precisely calibrated thermocouples, the method provides excellent temperature control of a small copper VCM heating plate at 125 + or - 0.2 C over a 24 hr test period. For purposes of unattended operation, the programmable computer/controller provides a continual data printout of system operation. Real time operator command is also provided for, as is automatic shutdown of the system and operator alarm in the event of malfunction.

Programmable control means for providing safe and controlled medication infusion

NASA Technical Reports Server (NTRS)

Fischell, Robert E. (Inventor)

1988-01-01

An implantable programmable infusion pump (IPIP) is disclosed and generally includes: a fluid reservoir filled with selected medication; a pump for causing a precise volumetric dosage of medication to be withdrawn from the reservoir and delivered to the appropriate site within the body; and, a control means for actuating the pump in a safe and programmable manner. The control means includes a microprocessor, a permanent memory containing a series of fixed software instructions, and a memory for storing prescription schedules, dosage limits and other data. The microprocessor actuates the pump in accordance with programmable prescription parameters and dosage limits stored in the memory. A communication link allows the control means to be remotely programmed. The control means incorporates a running integral dosage limit and other safety features which prevent an inadvertent or intentional medication overdose. The control means also monitors the pump and fluid handling system and provides an alert if any improper or potentially unsafe operation is detected.

77 FR 33243 - Applications and Amendments to Facility Operating Licenses and Combined Licenses Involving...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-05

... Operations Management Tricon Programmable Logic Controller (PLC), Version 10, and the CS Innovations, LLC... process protection system that is based on the Invensys Operations Management Tricon Programmable Logic...

Computer Controlled Portable Greenhouse Climate Control System for Enhanced Energy Efficiency

NASA Astrophysics Data System (ADS)

Datsenko, Anthony; Myer, Steve; Petties, Albert; Hustek, Ryan; Thompson, Mark

2010-04-01

This paper discusses a student project at Kettering University focusing on the design and construction of an energy efficient greenhouse climate control system. In order to maintain acceptable temperatures and stabilize temperature fluctuations in a portable plastic greenhouse economically, a computer controlled climate control system was developed to capture and store thermal energy incident on the structure during daylight periods and release the stored thermal energy during dark periods. The thermal storage mass for the greenhouse system consisted of a water filled base unit. The heat exchanger consisted of a system of PVC tubing. The control system used a programmable LabView computer interface to meet functional specifications that minimized temperature fluctuations and recorded data during operation. The greenhouse was a portable sized unit with a 5' x 5' footprint. Control input sensors were temperature, water level, and humidity sensors and output control devices were fan actuating relays and water fill solenoid valves. A Graphical User Interface was developed to monitor the system, set control parameters, and to provide programmable data recording times and intervals.

Pressure ramp programmer; IMBLMS Phase B4 Additional Tasks: Task 3.0 pressure ramp programmer

NASA Technical Reports Server (NTRS)

Fogal, G. L.; Reinhardt, C. G.

1972-01-01

A pressure ramp programmer model was designed, fabricated and tested. This model, in conjunction with an automatic blood pressure monitor, automatically controls the pressure in the blood pressure monitor arterial cuff. The cuff pressurization cycle is designed to maximize accuracy and repeatability of blood pressure measurements. The key feature of this automatic cycle is rapid blood pressure cuff bleed down from an initial setting until systolic (diastolic) pressure is encountered followed by a short repressurization and slow bleed, long enough to permit accurate systolic (diastolic) pressure determination. The system includes a pressure reservoir which bleeds the cuff through a precision needle valve; a solenoid valve which permits rapid pressurization from the reservoir; and a pressure sensor which provides information for bleed rate and set point controls. Korotkoff sound signals from a microphone in the blood pressure cuff (not part of the system) provide decision information to the digital control system. The system completed a series of engineering tests using simulated Korotkoff sound inputs. The system performed successfully in all cases and was stable over an extended period of time.

Programmable Control in Extracellular Matrix-mimicking Polymer Hydrogels.

PubMed

Hof, Kevin S; Bastings, Maartje M C

2017-06-28

The extracellular matrix (ECM) and cells have a reciprocal relationship, one shapes the other and vice versa. One of the main challenges of synthetic material systems for developmental cell culturing, organoid and stem cell work includes the implementation of this reciprocal nature. The largest hurdle to achieve true cell-instructive materials in biomaterials engineering is a lack of spatial and temporal control over material properties and the display of bioactive signals compared to the natural cell environment. ECM-mimicking hydrogels have been developed using a wide range of polymers, assembly and cross-linking strategies. While our synthetic toolbox is larger than nature, often our systems underperform when compared to ECM systems with natural components like Matrigel. Material properties and three-dimensional structure ill-represent the three-dimensional ECM reciprocal nature and ligand presentation is an oversimplified version of the complexity found in nature. We hypothesize that the lack of programmable control in properties and ligand presentation forms the basis of this mismatch in performance and analyze the presence of control in current state of the art ECM-mimicking systems based on covalent, supramolecular and recombinant polymers. We conclude that through combining the dynamics of supramolecular materials, robustness from covalent systems and the programmable spatial control of bio-activation in recombinant ECM materials, the optimal synthetic artificial ECM could be assembled.

Man-machine interface and control of the shuttle digital flight system

NASA Technical Reports Server (NTRS)

Burghduff, R. D.; Lewis, J. L., Jr.

1985-01-01

The space shuttle main engine (SSME) presented new requirements in the design of controls for large pump fed liquid rocket engine systems. These requirements were the need for built in full mission support capability, and complexity and flexibility of function not previously needed in this type of application. An engine mounted programmable digital control system was developed to meet these requirements. The engine system and controller and their function are described. Design challenges encountered during the course of development included accommodation for a very severe engine environment, the implementation of redundancy and redundancy management to provide fail operational/fail safe capability, removal of heat from the package, and significant constraints on computer memory size and processing time. The flexibility offered by programmable control reshaped the approach to engine design and development and set the pattern for future controls development in these types of applications.

Programmable dispersion on a photonic integrated circuit for classical and quantum applications.

PubMed

Notaros, Jelena; Mower, Jacob; Heuck, Mikkel; Lupo, Cosmo; Harris, Nicholas C; Steinbrecher, Gregory R; Bunandar, Darius; Baehr-Jones, Tom; Hochberg, Michael; Lloyd, Seth; Englund, Dirk

2017-09-04

We demonstrate a large-scale tunable-coupling ring resonator array, suitable for high-dimensional classical and quantum transforms, in a CMOS-compatible silicon photonics platform. The device consists of a waveguide coupled to 15 ring-based dispersive elements with programmable linewidths and resonance frequencies. The ability to control both quality factor and frequency of each ring provides an unprecedented 30 degrees of freedom in dispersion control on a single spatial channel. This programmable dispersion control system has a range of applications, including mode-locked lasers, quantum key distribution, and photon-pair generation. We also propose a novel application enabled by this circuit - high-speed quantum communications using temporal-mode-based quantum data locking - and discuss the utility of the system for performing the high-dimensional unitary optical transformations necessary for a quantum data locking demonstration.

Programmable Logic Controllers for Research on the Cyber Security of Industrial Power Plants

DTIC Science & Technology

2017-02-12

group . 15. SUBJECT TERMS Industrial control systems, cyber security 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF a. REPORT b. ABSTRACT c. THIS...currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (00-MM-YYYY) ,2. REPORT TYPE 3. DATES COVERED...From- To) 12/02/2017 Final 15 August 2015 - 12 February 2017 4. TITLE AND SUBTITLE Sa. CONTRACT NUMBER Programmable Logic Controllers for Research

Control Systems of Rubber Dryer Machinery Components Using Programmable Logic Control (PLC)

NASA Astrophysics Data System (ADS)

Hendra; Yulianto, A. S.; Indriani, A.; Hernadewita; Hermiyetti

2018-02-01

Application of programmable logic control (PLC) is widely used on the control systems in the many field engineering such as automotive, aviation, food processing and other industries [1-2]. PLC is simply program to control many automatic activity, easy to use, flexible and others. PLC using the ladder program to solve and regulated the control system component. In previous research, PLC was used for control system of rotary dryer machine. In this paper PLC are used for control system of motion component in the rubber dryer machinery. Component of rubber dryer machine is motors, gearbox, sprocket, heater, drying chamber and bearing. Principle working of rubber dryer machinery is wet rubber moving into the drying chamber by sprocket. Sprocket is driven by motors that conducted by PLC to moving and set of wet rubber on the drying chamber. Drying system uses greenhouse effect by making hanger dryer design in the form of line path. In this paper focused on motion control system motors and sensors drying rubber using PLC. The results show that control system of rubber dryer machinery can work in accordance control input and the time required to dry the rubber.

Translating theory into practice: results of a 2-year trial for the LEAD programme.

PubMed

Shelton, D

2008-05-01

This paper presents data for 2 years of a continuing study aimed to reduce the risk of first-time involvement by minority youth with the juvenile justice system. A quasi-experimental design was used to test a 14-week expressive art curriculum (LEAD: leadership, education, achievement and development) implemented in two rural communities. A total of 70 African American youth participated in the programme over a 2-year period. Pre- and post-test differences were examined for protective factors, behavioural self-control, self-esteem and resilience measures. When compared with the after-school programme (control group), youth in the LEAD programme in both communities had more dramatic increases in post-test scores following the intervention. The combined data from year 1 and year 2 provide positive findings in support of LEAD as a prevention programme for young offenders. The placement of the programme within an African American church in year 2 improved the processes of the LEAD programme and seemed to provide a better fit with the original design of the programme, highlighting the importance of the context, in which the programme was provided.

Programmable Thermostats for MPLM Shell Heater Control ULF1. 1; Thermal Performances

NASA Technical Reports Server (NTRS)

Glasgow, Shaun; Clark, Dallas; Trichilo, Michele; Trichilo, Michele

2007-01-01

The Multi-Purpose Logistics Module (MPLM) is the primary carrier for "pressurized" logistics to and from the International Space Station (ISS). The MPLM is transported in the payload bay of the Space Shuttle and is docked to the ISS for unloading, and reloading, of contents within the ISS shirt sleeve environment. Foil heaters, controlled originally with bi-metallic thermostats, are distributed across the outside of the MPLM structure and are utilized to provide energy to the structure to avoid exposure to cold temperatures and prevent condensation. The existing bi-metallic, fixed temperature set point thermostats have been replaced with Programmable Thermostats Modules (PTMs) in the Passive Thermal Control Subsystem (PTCS) 28Vdc shell heater circuits. The goal of using the PTM thermostat is to improve operational efficiency of the MPLM on-orbit shell heaters by providing better shell temperature control via feedback control capability. Each heater circuit contains a programmable thermostat connected to an external temperature sensor, a Resistive Temperature Device (RTD), which is used to provide continuous temperature monitoring capability. Each thermostat has programmable temperature set points and control spans. The data acquisition system uses a standard RS-485 serial interface communications cable to provide digital control capability. The PTM system was designed by MSFC, relying upon ALTEC support for their integration within the MPLM system design, while KSC performed the installation and ground checkout testing of the thermostat and RS-485 communication cable on the MPLM FM1 flight module. The PTMs were used for the first time during the STS-121/ULF1.1 mission. This paper will describe the design, development and verification of the PTM system, as well as the PTM flight performance and comparisons with SINDA thermal model predictions.

Measuring management's perspective of data quality in Pakistan's Tuberculosis control programme: a test-based approach to identify data quality dimensions.

PubMed

Ali, Syed Mustafa; Anjum, Naveed; Kamel Boulos, Maged N; Ishaq, Muhammad; Aamir, Javariya; Haider, Ghulam Rasool

2018-01-16

Data quality is core theme of programme's performance assessment and many organizations do not have any data quality improvement strategy, wherein data quality dimensions and data quality assessment framework are important constituents. As there is limited published research about the data quality specifics that are relevant to the context of Pakistan's Tuberculosis control programme, this study aims at identifying the applicable data quality dimensions by using the 'fitness-for-purpose' perspective. Forty-two respondents pooled a total of 473 years of professional experience, out of which 223 years (47%) were in TB control related programmes. Based on the responses against 11 practical cases, adopted from the routine recording and reporting system of Pakistan's TB control programme (real identities of patient were masked), completeness, accuracy, consistency, vagueness, uniqueness and timeliness are the applicable data quality dimensions relevant to the programme's context, i.e. work settings and field of practice. Based on a 'fitness-for-purpose' approach to data quality, this study used a test-based approach to measure management's perspective and identified data quality dimensions pertinent to the programme and country specific requirements. Implementation of a data quality improvement strategy and achieving enhanced data quality would greatly help organizations in promoting data use for informed decision making.

Knowledge and perceptions of national and provincial tuberculosis control programme managers in Pakistan about the WHO Stop TB strategy: a qualitative study.

PubMed

Khan, Wasiq Mehmood; Smith, Helen; Qadeer, Ejaz; Hassounah, Sondus

2016-01-01

To understand how national and provincial tuberculosis programme managers in Pakistan perceive and engage with the Stop TB strategy, its strengths, weaknesses and their experience in its implementation. National and provincial tuberculosis programme managers play an important role in effective implementation of the Stop TB strategy. A qualitative interview study was conducted with 10 national and provincial tuberculosis programme managers to understand how they perceive and engage with the Stop TB strategy, its strengths, weaknesses and their experience in its implementation. Managers were selected purposively; 10 managers were interviewed (six national staff and four from provincial level). National and provincial tuberculosis programme managers in Pakistan. Managers were selected purposively; 10 managers were interviewed (six national staff and four from provincial level). National and provincial tuberculosis programmes in Pakistan. 1. Knowledge and perceptions of national and provincial tuberculosis programme managers about the Stop TB strategy 2. Progress in implementing the strategy in Pakistan 3. Significant success factors 4. Significant implementation challenges 5. Lessons learnt to scale up successful implementation. The managers reported that most progress had been made in extending DOTS, health systems strengthening, public -private mixed interventions, MDR-TB care and TB/HIV care. The four factors that contributed significantly to progress were the availability of DOTS services, the public-private partnership approach, comprehensive guidance for TB control and government and donor commitment to TB control. This study identified three main challenges as perceived by national and provincial tuberculosis programme managers in terms of implementing the Stop TB strategy: 1. Inadequate political commitment, 2. Issue pertaining to prioritisation of certain components in the TB strategy over others due to external influences and 3. Limitations in the overall health system. To improve the tuberculosis control programme in the country political commitment needs to be enhanced and public -private partnerships increased. This can be done through government prioritisation of TB control at both national and provincial levels; donor-funded components should not receive undue attention; and partnerships with the private health sector, health institutions not yet covered by DOTS services, non-governmental organisations and patient coalitions should be increased.

Programmable Direct-Memory-Access Controller

NASA Technical Reports Server (NTRS)

Hendry, David F.

1990-01-01

Proposed programmable direct-memory-access controller (DMAC) operates with computer systems of 32000 series, which have 32-bit data buses and use addresses of 24 (or potentially 32) bits. Controller functions with or without help of central processing unit (CPU) and starts itself. Includes such advanced features as ability to compare two blocks of memory for equality and to search block of memory for specific value. Made as single very-large-scale integrated-circuit chip.

A distributed control system for the lower-hybrid current drive system on the Tokamak de Varennes

NASA Astrophysics Data System (ADS)

Bagdoo, J.; Guay, J. M.; Chaudron, G.-A.; Decoste, R.; Demers, Y.; Hubbard, A.

1990-08-01

An rf current drive system with an output power of 1 MW at 3.7 GHz is under development for the Tokamak de Varennes. The control system is based on an Ethernet local-area network of programmable logic controllers as front end, personal computers as consoles, and CAMAC-based DSP processors. The DSP processors ensure the PID control of the phase and rf power of each klystron, and the fast protection of high-power rf hardware, all within a 40 μs loop. Slower control and protection, event sequencing and the run-time database are provided by the programmable logic controllers, which communicate, via the LAN, with the consoles. The latter run a commercial process-control console software. The LAN protocol respects the first four layers of the ISO/OSI 802.3 standard. Synchronization with the tokamak control system is provided by commercially available CAMAC timing modules which trigger shot-related events and reference waveform generators. A detailed description of each subsystem and a performance evaluation of the system will be presented.

National infection prevention and control programmes: Endorsing quality of care.

PubMed

Stempliuk, Valeska; Ramon-Pardo, Pilar; Holder, Reynaldo

2014-01-01

Core components Health care-associated infections (HAIs) are a major cause of morbidity and mortality. In addition to pain and suffering, HAIs increase the cost of health care and generates indirect costs from loss of productivity for patients and society as a whole. Since 2005, the Pan American Health Organization has provided support to countries for the assessment of their capacities in infection prevention and control (IPC). More than 130 hospitals in 18 countries were found to have poor IPC programmes. However, in the midst of many competing health priorities, IPC programmes are not high on the agenda of ministries of health, and the sustainability of national programmes is not viewed as a key point in making health care systems more consistent and trustworthy. Comprehensive IPC programmes will enable countries to reduce the mobility, mortality and cost of HAIs and improve quality of care. This paper addresses the relevance of national infection prevention and control (NIPC) programmes in promoting, supporting and reinforcing IPC interventions at the level of hospitals. A strong commitment from national health authorities in support of national IPC programmes is crucial to obtaining a steady decrease of HAIs, lowering health costs due to HAIs and ensuring safer care.

Private Practitioners’ Perspectives on Their Involvement With the Tuberculosis Control Programme in a Southern Indian State

PubMed Central

Salve, Solomon; Sheikh, Kabir; Porter, John DH

2016-01-01

Background: Public and private health sectors both play a crucial role in the health systems of low- and middle-income countries (LMICs). The tuberculosis (TB) control strategy in India encourages the public sector to actively partner with private practitioners (PPs) to improve the quality of front line service delivery. However, ensuring effective and sustainable involvement of PPs constitutes a major challenge. This paper reports the findings from an empirical study focusing on the perspectives and experiences of PPs towards their involvement in TB control programme in India. Methods: The study was carried out between November 2010 and December 2011 in a district of a Southern Indian State and utilised qualitative methodologies, combining observations and in-depth interviews with 21 PPs from different medical systems. The collected data was coded and analysed using thematic analysis. Results: PPs perceived themselves to be crucial healthcare providers, with different roles within the public-private mix (PPM) TB policy. Despite this, PPs felt neglected and undervalued in the actual process of implementation of the PPM-TB policy. The entire process was considered to be government driven and their professional skills and knowledge of different medical systems remained unrecognised at the policy level, and weakened their relationship and bond with the policy and with the programme. PPs had contrasting perceptions about the different components of the TB programme that demonstrated the public sector’s dominance in the overall implementation of the DOTS strategy. Although PPs felt responsible for their TB patients, they found it difficult to perceive themselves as ‘partners with the TB programme.’ Conclusion: Public-private partnerships (PPPs) are increasingly utilized as a public health strategy to strengthen health systems. These policies will fail if the concerns of the PPs are neglected. To ensure their long-term involvement in the programme the abilities of PPs and the important perspectives from other Indian medical systems need to be recognised and supported. PMID:27801358

Programmable Pulse Generator for Aditya Gas Puffing System

NASA Astrophysics Data System (ADS)

Patel, Narendra; Chavda, Chhaya; Bhatt, S. B.; Chattopadhyay, Prabal; Saxena, Y. C.

2012-11-01

In the Aditya Tokamak, one of primary requirement for plasma generation is to feed the required quantity of the fuel gas prior to plasma shot. Gas feed system mainly consists of piezoelectric gas leak valve and gas reservoir. The Hydrogen gas is prior to 300ms loop voltage for the duration of 4 msec to 7 msec. Gas is puffed during the shot for required plasma parameters and to increase plasma density using the same system. The valve is controlled by either continuous voltage or pulses of different width, amplitude and delay with respect to loop voltage. These voltage pulses are normally applied through standard pulse generator. The standard pulse generator is replaced by micro controller based in housed developed programmable pulse generator system consists of in built power supply, BNC input for external trigger, BNC output and serial interface. This programmable pulse generator is successfully tested and is in operation for gas puffing during ADITYA Tokamak experiments. The paper discusses the design and development aspect of the system.

The Early Development of Programmable Machinery.

ERIC Educational Resources Information Center

Collins, Martin D.

1985-01-01

Programmable equipment innovations, precursors of today's technology, are examined, including the development of the binary code and feedback control systems, such as temperature sensing devices, interchangeable parts, punched cards carrying instructions, continuous flow oil refining process, assembly lines for mass production, and the…

INTEGRATED AIR POLLUTION CONTROL SYSTEM VERSION 5.0 - VOLUME 3: PROGRAMMER'S MAINTENANCE MANUAL

EPA Science Inventory

The three volume report and two diskettes document the Integrated Air Pollution Control System (IAPCS), developed for the U.S. EPA to estimate costs and performance for emission control systems applied to coal-fired utility boilers. The model can project a material balance, an eq...

INTEGRATED AIR POLLUTION CONTROL SYSTEM, VERSION 4.0 - VOLUME 3: PROGRAMMER'S MAINTENACE MANUAL

EPA Science Inventory

The Integrated Air Pollution Control System (IAPCS) was developed for the U.S. EPA's Air and Energy Engineering Research Laboratory to estimate costs and performance for emission control systems applied to coal-fired utility boilers. The model can project a material balance, and ...

The National Action Plan for the Prevention and Control of Non-communicable Diseases and Health Promotion in Pakistan--Cardiovascular diseases.

PubMed

Nishtar, Sania; Faruqui, Azhar M A; Mattu, Mohamad A; Mohamud, Khalif Bile; Ahmed, Ashfaq

2004-12-01

The National Action Plan for Non-Communicable Disease Prevention, Control and Health Promotion in Pakistan (NAP-NCD) incorporates prevention and control of cardiovascular diseases (CVD) as part of a comprehensive and integrated non-communicable Disease (NCD) prevention effort. In this programme, surveillance of cardiovascular risk factors is part of an integrated population-based NCD surveillance system. The population approach to CVD prevention is a priority area in this programme with a focus on broad policy measures and behavioural change communication. The former include revision of the current policy on diet and nutrition to expand its focus on under-nutrition; the development of a physical activity policy; strategies to limit the production of, and access to, ghee as a medium for cooking and agricultural and fiscal policies that increase the demand for, and make healthy food more accessible. The programme focuses attention on improving the quality of prevention programmes within primary and basic health sites and integrates concerted primary and secondary prevention programmes into health services as part of a comprehensive and sustainable, scientifically valid, and resource-sensitive programme for all categories of healthcare providers. It promotes screening for raised blood pressure at the population level and screening for dyslipidaemia and diabetes in high-risk groups only. It highlights the need to ensure the availability of aspirin, beta blockers, thiazides, ACE inhibitors, statins and penicillin at all levels of healthcare. The programme points out the need to conduct clinical end-point trials in the native Pakistani setting to define cost-effective therapeutic strategies for primary and secondary prevention of CVDs. Emphasis is laid on building capacity of health systems in support of CVD prevention and control and building a coalition or network of organizations to add momentum to CVD prevention and control efforts.

Beyond providing drugs: the Mectizan® donation stimulates new strategies in service delivery and in strengthening health systems.

PubMed

Hopkins, Adrian

2012-05-01

The donation of Mectizan® by Merck & Co Inc. in 1987 "as much as was needed for as long as was needed for onchocerciasis control" was a major change from traditional corporate drug donations. The company realised that those who needed the drug most would never be able to purchase it, and so gave it away. The donation enabled the Onchocerciasis Control Programme in West Africa to add Mectizan distribution to its ongoing control strategy. For the first time there was hope for those living in other areas of Africa, Latin America and Yemen. Governments and non-governmental development organizations quickly got together to begin treatment in these new areas. Two new programmes and partnerships were created; the African Programme for Onchocerciasis Control and the Onchocerciasis Elimination Programme for the Americas. These programmes have been in the forefront of developing new strategies, including the Community Directed approach, which has now expanded into other disease control programmes at the community level, such as Vitamin A distribution and malaria control. This donation has led not only to the probability of elimination of onchocerciasis in the Americas in the near future, but is stimulating approaches to the elimination in Africa, in areas considered impossible five years ago. Other major pharmaceutical donations have followed, initiating the plan to eliminate lymphatic filariasis worldwide, and also stimulating interest in controlling other "neglected tropical diseases," which affect the poorest billion of the world's population, making this now a reality.

B-Plant Canyon Ventilation Control System Description

DOE Office of Scientific and Technical Information (OSTI.GOV)

MCDANIEL, K.S.

1999-08-31

Project W-059 installed a new B Plant Canyon Ventilation System. Monitoring and control of the system is implemented by the Canyon Ventilation Control System (CVCS). This document describes the CVCS system components which include a Programmable Logic Controller (PLC) coupled with an Operator Interface Unit (OIU) and application software. This document also includes an Alarm Index specifying the setpoints and technical basis for system analog and digital alarms.

Programmable controller system for wind tunnel diversion vanes

NASA Technical Reports Server (NTRS)

King, R. F.

1982-01-01

A programmable controller (PC) system automatic sequence control, which acts as a supervisory controller for the servos, selects the proper drives, and automatically sequences the vanes, was developed for use in a subsonic wind tunnel. Tunnel modifications include a new second test section (80 ft x 100 ft with a maximum air speed capability of 110 knots) and an increase in maximum velocity flow from 200 knots to 300 knots. A completely automatic sequence control is necessary in order to allow intricate motion of the 14 triangularly arranged vanes which can be as large as 70 ft high x 35 ft wide and which require precise acceleration and deceleration control. Rate servos on each drive aid in this control, and servo cost was minimized by using four silicon controlled rectifier controllers to control the 20 dc drives. The PC has a programming capacity which facilitated the implementation of extensive logic design. A series of diagrams sequencing the vanes and a block diagram of the system are included.

Second-generation HIV surveillance: better data for decision-making.

PubMed Central

Rehle, Thomas; Lazzari, Stefano; Dallabetta, Gina; Asamoah-Odei, Emil

2004-01-01

This paper seeks to outline the key elements of the expanded surveillance efforts recommended by the second-generation HIV surveillance approach. Second-generation systems focus on improving and expanding existing surveillance methods and combine them in ways that have the greatest explanatory power. The main elements of this approach include: considering biological surveillance - HIV, AIDS, sexually transmitted infections (STIs) - and behavioural surveillance as integral components, targeting surveillance efforts at segments of the population where most new infections are concentrated - which might differ depending on the stage and type of the epidemic - and providing the rationale for the optimal use of data generated for monitoring the HIV epidemic and evaluating national AIDS control programmes. The paper emphasizes improvements in existing surveillance methodologies and discusses in detail crucial issues such as the validity of HIV prevalence data measured in pregnant women and linking HIV surveillance and behavioural data collection. In addition, a strategic partnership between second-generation surveillance and AIDS programme evaluation is proposed that stresses the complementary roles of these data collection activities in determining the effectiveness of prevention and care programmes and explaining the epidemiological trend data collected by sentinel serosurveillance systems. In conclusion, second-generation HIV surveillance systems provide a comprehensive, cost-effective and appropriate response to the information needs of AIDS control programmes. The implementation of such systems, including a better use of the data generated by the system, will ensure that national programmes are in the best possible position to respond to the challenges of the epidemic. PMID:15042234

Second-generation HIV surveillance: better data for decision-making.

PubMed

Rehle, Thomas; Lazzari, Stefano; Dallabetta, Gina; Asamoah-Odei, Emil

2004-02-01

This paper seeks to outline the key elements of the expanded surveillance efforts recommended by the second-generation HIV surveillance approach. Second-generation systems focus on improving and expanding existing surveillance methods and combine them in ways that have the greatest explanatory power. The main elements of this approach include: considering biological surveillance - HIV, AIDS, sexually transmitted infections (STIs) - and behavioural surveillance as integral components, targeting surveillance efforts at segments of the population where most new infections are concentrated - which might differ depending on the stage and type of the epidemic - and providing the rationale for the optimal use of data generated for monitoring the HIV epidemic and evaluating national AIDS control programmes. The paper emphasizes improvements in existing surveillance methodologies and discusses in detail crucial issues such as the validity of HIV prevalence data measured in pregnant women and linking HIV surveillance and behavioural data collection. In addition, a strategic partnership between second-generation surveillance and AIDS programme evaluation is proposed that stresses the complementary roles of these data collection activities in determining the effectiveness of prevention and care programmes and explaining the epidemiological trend data collected by sentinel serosurveillance systems. In conclusion, second-generation HIV surveillance systems provide a comprehensive, cost-effective and appropriate response to the information needs of AIDS control programmes. The implementation of such systems, including a better use of the data generated by the system, will ensure that national programmes are in the best possible position to respond to the challenges of the epidemic.

Troubleshooting of an Electromechanical System (Westinghouse PLC Controlling a Pneumatic Robot). High-Technology Training Module.

ERIC Educational Resources Information Center

Tucker, James D.

This training module on the troubleshooting of an electromechanical system, The Westinghouse Programmable Logic Controller (PLC) controlling a pneumatic robot, is used for a troubleshooting unit in an electromechanical systems/robotics and automation systems course. In this unit, students locate and repair a defect in a PLC-operated machine. The…

MOEMs devices designed and tested for future astronomical instrumentation in space

NASA Astrophysics Data System (ADS)

Zamkotsian, Frédéric; Lanzoni, Patrick; Waldis, Severin; Noell, Wilfried; Conedera, Veronique; Fabre, Norbert; Viard, Thierry; Buisset, Christophe

2017-11-01

Next generation of astronomical instrumentation for space telescopes requires Micro-Opto-Electro- Mechanical Systems (MOEMS) with remote control capability and cryogenic operation. MOEMS devices have the capability to tailor the incoming light in terms of intensity and object selection with programmable slit masks, in terms of phase and wavefront control with micro-deformable mirrors, and finally in terms of spectrum with programmable diffraction gratings. Applications are multi-object spectroscopy (MOS), wavefront correction and programmable spectrographs. We are engaged since several years in the design, realization and characterization of MOEMS devices suited for astronomical instrumentation.

Disease eradication and health systems development.

PubMed Central

Melgaard, B.; Creese, A.; Aylward, B.; Olivé, J. M.; Maher, C.; Okwo-Bele, J. M.; Lee, J. W.

1998-01-01

This article provides a framework for the design of future eradication programmes so that the greatest benefit accrues to health systems development from the implementation of such programmes. The framework focuses on weak and fragile health systems and assumes that eradication leads to the cessation of the intervention required to eradicate the disease. Five major components of health systems are identified and key elements which are of particular relevance to eradication initiatives are defined. The dearth of documentation which can provide "lessons learned" in this area is illustrated with a brief review of the literature. Opportunities and threats, which can be addressed during the design of eradication programmes, are described and a number of recommendations are outlined. It is emphasized that this framework pertains to eradication programmes but may be useful in attempts to coordinate vertical and horizontal disease control activities for maximum mutual benefits. PMID:10063670

Will integrated surveillance systems for vectors and vector-borne diseases be the future of controlling vector-borne diseases? A practical example from China.

PubMed

Wu, Y; Ling, F; Hou, J; Guo, S; Wang, J; Gong, Z

2016-07-01

Vector-borne diseases are one of the world's major public health threats and annually responsible for 30-50% of deaths reported to the national notifiable disease system in China. To control vector-borne diseases, a unified, effective and economic surveillance system is urgently needed; all of the current surveillance systems in China waste resources and/or information. Here, we review some current surveillance systems and present a concept for an integrated surveillance system combining existing vector and vector-borne disease monitoring systems. The integrated surveillance system has been tested in pilot programmes in China and led to a 21·6% cost saving in rodent-borne disease surveillance. We share some experiences gained from these programmes.

PLC based automatic control of pasteurize mix in ice cream production

NASA Astrophysics Data System (ADS)

Yao, Xudong; Liang, Kai

2013-03-01

This paper describes the automatic control device of pasteurized mix in the ice cream production process.We design a scheme of control system using FBD program language and develop the programmer in the STEP 7-Micro/WIN software, check for any bugs before downloading into PLC .These developed devices will able to provide flexibility and accuracy to control the step of pasteurized mix. The operator just Input the duration and temperature of pasteurized mix through control panel. All the steps will finish automatically without any intervention in a preprogrammed sequence stored in programmable logic controller (PLC). With the help of this equipment we not only can control the quality of ice cream for various conditions, but also can simplify the production process. This control system is inexpensive and can be widely used in ice cream production industry.

Field programmable chemistry: integrated chemical and electronic processing of informational molecules towards electronic chemical cells.

PubMed

Wagler, Patrick F; Tangen, Uwe; Maeke, Thomas; McCaskill, John S

2012-07-01

The topic addressed is that of combining self-constructing chemical systems with electronic computation to form unconventional embedded computation systems performing complex nano-scale chemical tasks autonomously. The hybrid route to complex programmable chemistry, and ultimately to artificial cells based on novel chemistry, requires a solution of the two-way massively parallel coupling problem between digital electronics and chemical systems. We present a chemical microprocessor technology and show how it can provide a generic programmable platform for complex molecular processing tasks in Field Programmable Chemistry, including steps towards the grand challenge of constructing the first electronic chemical cells. Field programmable chemistry employs a massively parallel field of electrodes, under the control of latched voltages, which are used to modulate chemical activity. We implement such a field programmable chemistry which links to chemistry in rather generic, two-phase microfluidic channel networks that are separated into weakly coupled domains. Electric fields, produced by the high-density array of electrodes embedded in the channel floors, are used to control the transport of chemicals across the hydrodynamic barriers separating domains. In the absence of electric fields, separate microfluidic domains are essentially independent with only slow diffusional interchange of chemicals. Electronic chemical cells, based on chemical microprocessors, exploit a spatially resolved sandwich structure in which the electronic and chemical systems are locally coupled through homogeneous fine-grained actuation and sensor networks and play symmetric and complementary roles. We describe how these systems are fabricated, experimentally test their basic functionality, simulate their potential (e.g. for feed forward digital electrophoretic (FFDE) separation) and outline the application to building electronic chemical cells. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

An evaluation of a micro programmable logic controller for oxygen monitoring and control in tanks of a recirculating aquaculture system

USDA-ARS?s Scientific Manuscript database

Control of dissolved gases, especially oxygen is an essential component of recirculating aquaculture systems. The use of pure oxygen in a recirculating aquaculture system creates supersaturated concentrations of dissolved oxygen and can reduce fish production costs by supporting greater fish and fee...

A programmable ISA to USB interface

NASA Astrophysics Data System (ADS)

Ribas, R. V.

2013-05-01

A programmable device to access and control ISA-standard camac instrumentation and interfacing it to the USB port of computers, is described in this article. With local processing capabilities and event buffering before sending data to the computer, the new acquisition system become much more efficient.

Bulgarian experience in the establishment of reference dose levels and implementation of a quality control system in diagnostic radiology.

PubMed

Vassileva, J; Dimov, A; Slavchev, A; Karadjov, A

2005-01-01

Results from a Bulgarian patient dose survey in diagnostic radiology are presented. Reference levels for entrance surface dose (ESD) were 0.9 mGy for chest radiography (PA), 30 mGy for lumbar spine (Lat), 10 mGy for pelvis, 5 mGy for skull (AP), 3 mGy for skull (Lat) and 13 mGy for mammography. Quality control (QC) programmes were proposed for various areas of diagnostic radiology. Film processing QC warranted special attention. Proposed QC programmes included parameters to be tested, level of expertise needed and two action levels: remedial and suspension. Programmes were tested under clinical conditions to assess initial results and draw conclusions for further QC system development. On the basis of international experience, measurement protocols were developed for all parameters tested. QC equipment was provided as part of the PHARE project. A future problem for QC programme implementation may be the small number of medical physics experts in diagnostic radiology.

A field programmable gate array unit for the diagnosis and control of neoclassical tearing modes on MAST

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Gorman, T.; Gibson, K. J.; Snape, J. A.

2012-10-15

A real-time system has been developed to trigger both the MAST Thomson scattering (TS) system and the plasma control system on the phase and amplitude of neoclassical tearing modes (NTMs), extending the capabilities of the original system. This triggering system determines the phase and amplitude of a given NTM using magnetic coils at different toroidal locations. Real-time processing of the raw magnetic data occurs on a low cost field programmable gate array (FPGA) based unit which permits triggering of the TS lasers on specific amplitudes and phases of NTM evolution. The MAST plasma control system can receive a separate triggermore » from the FPGA unit that initiates a vertical shift of the MAST magnetic axis. Such shifts have fully removed m/n= 2/1 NTMs instabilities on a number of MAST discharges.« less

Programmable, automated transistor test system

NASA Technical Reports Server (NTRS)

Truong, L. V.; Sundburg, G. R.

1986-01-01

A programmable, automated transistor test system was built to supply experimental data on new and advanced power semiconductors. The data will be used for analytical models and by engineers in designing space and aircraft electric power systems. A pulsed power technique was used at low duty cycles in a nondestructive test to examine the dynamic switching characteristic curves of power transistors in the 500 to 1000 V, 10 to 100 A range. Data collection, manipulation, storage, and output are operator interactive but are guided and controlled by the system software.

Active optical control system design of the SONG-China Telescope

NASA Astrophysics Data System (ADS)

Ye, Yu; Kou, Songfeng; Niu, Dongsheng; Li, Cheng; Wang, Guomin

2012-09-01

The standard SONG node structure of control system is presented. The active optical control system of the project is a distributed system, and a host computer and a slave intelligent controller are included. The host control computer collects the information from wave front sensor and sends commands to the slave computer to realize a closed loop model. For intelligent controller, a programmable logic controller (PLC) system is used. This system combines with industrial personal computer (IPC) and PLC to make up a control system with powerful and reliable.

Computer-Aided System Engineering and Analysis (CASE/A) Programmer's Manual, Version 5.0

NASA Technical Reports Server (NTRS)

Knox, J. C.

1996-01-01

The Computer Aided System Engineering and Analysis (CASE/A) Version 5.0 Programmer's Manual provides the programmer and user with information regarding the internal structure of the CASE/A 5.0 software system. CASE/A 5.0 is a trade study tool that provides modeling/simulation capabilities for analyzing environmental control and life support systems and active thermal control systems. CASE/A has been successfully used in studies such as the evaluation of carbon dioxide removal in the space station. CASE/A modeling provides a graphical and command-driven interface for the user. This interface allows the user to construct a model by placing equipment components in a graphical layout of the system hardware, then connect the components via flow streams and define their operating parameters. Once the equipment is placed, the simulation time and other control parameters can be set to run the simulation based on the model constructed. After completion of the simulation, graphical plots or text files can be obtained for evaluation of the simulation results over time. Additionally, users have the capability to control the simulation and extract information at various times in the simulation (e.g., control equipment operating parameters over the simulation time or extract plot data) by using "User Operations (OPS) Code." This OPS code is written in FORTRAN with a canned set of utility subroutines for performing common tasks. CASE/A version 5.0 software runs under the VAX VMS(Trademark) environment. It utilizes the Tektronics 4014(Trademark) graphics display system and the VTIOO(Trademark) text manipulation/display system.

Knowledge and perceptions of national and provincial tuberculosis control programme managers in Pakistan about the WHO Stop TB strategy: a qualitative study

PubMed Central

Khan, Wasiq Mehmood; Smith, Helen; Qadeer, Ejaz

2016-01-01

Objective To understand how national and provincial tuberculosis programme managers in Pakistan perceive and engage with the Stop TB strategy, its strengths, weaknesses and their experience in its implementation. National and provincial tuberculosis programme managers play an important role in effective implementation of the Stop TB strategy. Design A qualitative interview study was conducted with 10 national and provincial tuberculosis programme managers to understand how they perceive and engage with the Stop TB strategy, its strengths, weaknesses and their experience in its implementation. Managers were selected purposively; 10 managers were interviewed (six national staff and four from provincial level). Participants National and provincial tuberculosis programme managers in Pakistan. Managers were selected purposively; 10 managers were interviewed (six national staff and four from provincial level). Setting National and provincial tuberculosis programmes in Pakistan Main outcome measures 1. Knowledge and perceptions of national and provincial tuberculosis programme managers about the Stop TB strategy 2. Progress in implementing the strategy in Pakistan 3. Significant success factors 4. Significant implementation challenges 5. Lessons learnt to scale up successful implementation. Results The managers reported that most progress had been made in extending DOTS, health systems strengthening, public -private mixed interventions, MDR-TB care and TB/HIV care. The four factors that contributed significantly to progress were the availability of DOTS services, the public-private partnership approach, comprehensive guidance for TB control and government and donor commitment to TB control. Conclusion This study identified three main challenges as perceived by national and provincial tuberculosis programme managers in terms of implementing the Stop TB strategy: 1. Inadequate political commitment, 2. Issue pertaining to prioritisation of certain components in the TB strategy over others due to external influences and 3. Limitations in the overall health system. To improve the tuberculosis control programme in the country political commitment needs to be enhanced and public -private partnerships increased. This can be done through government prioritisation of TB control at both national and provincial levels; donor-funded components should not receive undue attention; and partnerships with the private health sector, health institutions not yet covered by DOTS services, non-governmental organisations and patient coalitions should be increased. PMID:28203383

Addressing policy needs for prevention and control of type 2 diabetes in India.

PubMed

Atre, Sachin

2015-09-01

India carries nearly one-fifth of the global burden of diabetes cases, the majority of which are of type 2 diabetes. Recognising the need for controlling diabetes, the Government of India has initiated a national level programme for prevention and control of diabetes along with other non-communicable diseases in 2008. Despite being piloted and implemented, there is hardly any published literature about the national level situation of diabetes and its control efforts. The present article is written with the aim to fill this gap to some extent and to provide a situational analysis of the diabetes problem in India in a holistic way, addressing policy needs for the national programme. It focuses on three main areas, namely, awareness of diabetes, costs of drugs for its treatment and healthcare-system related issues. It argues that poor coverage and weak implementation of the national level programme are major forces that push patients to seek help in the weakly regulated private sector. Approaching the private sector is likely to increase the cost of care, which in turn can lead to an increased financial burden for patients and their families due to factors such as patients' lack of awareness about diabetes, poor drug price regulation and prescriptions including combinations and/or patented products of medicines used for treating diabetes by the private sector. This article addresses several needs such as strengthening the national programme and increasing its reach to unreached districts, exerting drug price regulation and implementing community-based participatory programmes for prevention and management of type 2 diabetes. It also underscores a need for piloting and implementing a robust national level electronic reporting system for diabetes programmes. © Royal Society for Public Health 2015.

Reduced Precision Redundancy Applied to Arithmetic Operations in Field Programmable Gate Arrays for Satellite Control and Sensor Systems

DTIC Science & Technology

2008-12-01

Figure 2. Definition of Attitude Angles and Torque Components in Spacecraft Reference Frame...Figure 5. PD controller in ideal three-axis-stabilized spacecraft ADCS. ................................16 Figure 6. Extract Position Angles function in...performance of spacecraft systems. Two categories of system architectures are discussed: recursive data management, found in feedback control systems; and

Microprocessors: Laboratory Simulation of Industrial Control Applications.

ERIC Educational Resources Information Center

Gedeon, David V.

1981-01-01

Describes a course to make technical managers more aware of computer technology and how data loggers, programmable controllers, and larger computer systems interact in a hierarchical configuration of manufacturing process control. (SK)

ANOPP programmer's reference manual for the executive System. [aircraft noise prediction program

NASA Technical Reports Server (NTRS)

Gillian, R. E.; Brown, C. G.; Bartlett, R. W.; Baucom, P. H.

1977-01-01

Documentation for the Aircraft Noise Prediction Program as of release level 01/00/00 is presented in a manual designed for programmers having a need for understanding the internal design and logical concepts of the executive system software. Emphasis is placed on providing sufficient information to modify the system for enhancements or error correction. The ANOPP executive system includes software related to operating system interface, executive control, and data base management for the Aircraft Noise Prediction Program. It is written in Fortran IV for use on CDC Cyber series of computers.

Control of intestinal parasitic infections in Seychelles: a comprehensive and sustainable approach.

PubMed Central

Albonico, M.; Shamlaye, N.; Shamlaye, C.; Savioli, L.

1996-01-01

Intestinal parasitic infections have been perceived as a public health problem in Seychelles for decades. A comprehensive strategy to reduce morbidity and, in the long term, transmission of intestinal parasites has been implemented successfully since 1993. Management of the programme is integrated into the well established primary health care system, with control activities being undertaken through existing health facilities. The strategy is based on periodic chemotherapy of schoolchildren, intense health education and improvement of sanitation and safe water supply. The initial objectives of the control programme were met after 2 years of activities, with an overall reduction in prevalence of intestinal parasitic infections of 44%. The intensity of infection with Trichuris trichiura, the commonest parasite, was halved (from 780 to 370 eggs per g of faeces). The programme's integrated approach, in concert with political commitment and limited operational costs, is a warranty for the future sustainability of control activities. The programme can be seen as a model for other developing countries, even where health and socioeconomic conditions are different and the control of parasitic infections will need a much longer-term commitment. PMID:9060217

The interface between the national tuberculosis control programme and district hospitals in Cameroon: missed opportunities for strengthening the local health system -a multiple case study.

PubMed

Keugoung, Basile; Macq, Jean; Buve, Anne; Meli, Jean; Criel, Bart

2013-03-22

Tuberculosis remains a major public health problem in sub-Saharan Africa. District hospitals (DHs) play a central role in district-based health systems, and their relation with vertical programmes is very important. Studies on the impact of vertical programmes on DHs are rare. This study aims to fill this gap. Its purpose is to analyse the interaction between the National Tuberculosis Control Programme (NTCP) and DHs in Cameroon, especially its effects on the human resources, routine health information system (HIS) and technical capacity at the hospital level. We used a multiple case study methodology. From the Adamaoua Region, we selected two DHs, one public and one faith-based. We collected qualitative and quantitative data through document reviews, semi-structured interviews with district and regional staff, and observations in the two DHs. The NTCP trained and supervised staff, designed and provided tuberculosis data collection and reporting tools, and provided anti-tuberculosis drugs, reagents and microscopes to DHs. However, these interventions were limited to the hospital units designated as Tuberculosis Diagnostic and Treatment Centres and to staff dedicated to tuberculosis control activities. The NTCP installed a parallel HIS that bypassed the District Health Services. The DH that performs well in terms of general hospital care and that is well managed was successful in tuberculosis control. Based on the available resources, the two hospitals adapt the organisation of tuberculosis control to their settings. The management teams in charge of the District Health Services are not involved in tuberculosis control. In our study, we identified several opportunities to strengthen the local health system that have been missed by the NTCP and the health system managers. Well-managed DHs perform better in terms of tuberculosis control than DHs that are not well managed. The analysis of the effects of the NTCP on the human resources, HIS and technical capacity of DHs indicates that the NTCP supports, rather than strengthens, the local health system. Moreover, there is potential for this support to be enhanced. Positive synergies between the NTCP and district health systems can be achieved if opportunities to strengthen the district health system are seized. The question remains, however, of why managers do not take advantage of the opportunities to strengthen the health system.

The interface between the national tuberculosis control programme and district hospitals in Cameroon: missed opportunities for strengthening the local health system –a multiple case study

PubMed Central

2013-01-01

Background Tuberculosis remains a major public health problem in sub-Saharan Africa. District hospitals (DHs) play a central role in district-based health systems, and their relation with vertical programmes is very important. Studies on the impact of vertical programmes on DHs are rare. This study aims to fill this gap. Its purpose is to analyse the interaction between the National Tuberculosis Control Programme (NTCP) and DHs in Cameroon, especially its effects on the human resources, routine health information system (HIS) and technical capacity at the hospital level. Methods We used a multiple case study methodology. From the Adamaoua Region, we selected two DHs, one public and one faith-based. We collected qualitative and quantitative data through document reviews, semi-structured interviews with district and regional staff, and observations in the two DHs. Results The NTCP trained and supervised staff, designed and provided tuberculosis data collection and reporting tools, and provided anti-tuberculosis drugs, reagents and microscopes to DHs. However, these interventions were limited to the hospital units designated as Tuberculosis Diagnostic and Treatment Centres and to staff dedicated to tuberculosis control activities. The NTCP installed a parallel HIS that bypassed the District Health Services. The DH that performs well in terms of general hospital care and that is well managed was successful in tuberculosis control. Based on the available resources, the two hospitals adapt the organisation of tuberculosis control to their settings. The management teams in charge of the District Health Services are not involved in tuberculosis control. In our study, we identified several opportunities to strengthen the local health system that have been missed by the NTCP and the health system managers. Conclusion Well-managed DHs perform better in terms of tuberculosis control than DHs that are not well managed. The analysis of the effects of the NTCP on the human resources, HIS and technical capacity of DHs indicates that the NTCP supports, rather than strengthens, the local health system. Moreover, there is potential for this support to be enhanced. Positive synergies between the NTCP and district health systems can be achieved if opportunities to strengthen the district health system are seized. The question remains, however, of why managers do not take advantage of the opportunities to strengthen the health system. PMID:23521866

Comparing federal and state healthcare provider performance in villages targeted by the conditional cash transfer programme of Mexico.

PubMed

Bustamante, Arturo Vargas

2011-10-01

This study investigates household out-of-pocket healthcare expenditures (OPH) and preventive care utilization (PHU) to compare federal and state healthcare provider performance in villages targeted by conditional cash transfer (CCT) programmes in poor rural areas of Mexico. Lower OPH and higher PHU are indicative of better performance in the study setting. Log-linear and probit regression models were used to compare outcomes in households from treatment and control villages reached by federal and state healthcare providers. In treatment villages, eligible households receive cash grants from the CCT programme. In control villages, eligible households do not receive cash grants from the CCT programme at the time of the survey. Families who live in treatment villages reported lower OPH (-52.5% for federal and -46.2% for state clinics) and higher PHU (21% for federal and 20% for state clinics) regardless of clinic setting. As the reduction in OPH is higher in areas reached by the federal clinics, it implies better performance from this healthcare delivery system. Additionally, federal clinic outcomes were also more homogeneous because OPH are not significantly different between treatment and control villages. Alternative measures such as drug and physician expenditures, diabetes and hypertension tests and nutritional-supplement receipt confirmed these findings. Mexico has two healthcare delivery systems that cater to identical rural populations. The better-funded and more centralized federal system is more effective at providing health care in poor rural villages of Mexico regardless of CCT participation. State clinics in villages targeted by the CCT programme, however, perform significantly better. © 2011 Blackwell Publishing Ltd.

PROGRAMMABLE EXPOSURE CONTROL SYSTEM FOR DETERMINATION OF THE EFFECTS OF POLLUTANT EXPOSURE REGIMES ON PLANT GROWTH

EPA Science Inventory

A field-exposure research facility was constructed to provide a controlled environment to determine the influence of the various components of ozone exposure on plant response. The facility uses modified open-top chambers and an automated control system for continuous delivery an...

Risk management and lessons learned solutions for satellite product assurance

NASA Astrophysics Data System (ADS)

Larrère, Jean-Luc

2004-08-01

The historic trend of the space industry towards lower cost programmes and more generally a better economic efficiency raises a difficult question to the quality assurance community: how to achieve the same—or better—mission success rate while drastically reducing the cost of programmes, hence the cost and level of quality assurance activities. EADS Astrium Earth Observation and Science (France) Business Unit have experimented Risk Management and Lessons Learned on their satellite programmes to achieve this goal. Risk analysis and management are deployed from the programme proposal phase through the development and operations phases. Results of the analysis and the corresponding risk mitigation actions are used to tailor the product assurance programme and activities. Lessons learned have been deployed as a systematic process to collect positive and negative experience from past and on-going programmes and feed them into new programmes. Monitoring and justification of their implementation in programmes is done under supervision from the BU quality assurance function. Control of the system is ensured by the company internal review system. Deployment of these methods has shown that the quality assurance function becomes more integrated in the programme team and development process and that its tasks gain focus and efficiency while minimising the risks associated with new space programmes.

Programmable superpositions of Ising configurations

NASA Astrophysics Data System (ADS)

Sieberer, Lukas M.; Lechner, Wolfgang

2018-05-01

We present a framework to prepare superpositions of bit strings, i.e., many-body spin configurations, with deterministic programmable probabilities. The spin configurations are encoded in the degenerate ground states of the lattice-gauge representation of an all-to-all connected Ising spin glass. The ground-state manifold is invariant under variations of the gauge degrees of freedom, which take the form of four-body parity constraints. Our framework makes use of these degrees of freedom by individually tuning them to dynamically prepare programmable superpositions. The dynamics combines an adiabatic protocol with controlled diabatic transitions. We derive an effective model that allows one to determine the control parameters efficiently even for large system sizes.

[Methodological problems in the use of information technologies in physical education].

PubMed

Martirosov, E G; Zaĭtseva, G A

2000-01-01

The paper considers methodological problems in the use of computer technologies in physical education by applying diagnostic and consulting systems, educational and educational-and-training process automation systems, and control and self-control programmes for athletes and others.

FPGA cluster for high-performance AO real-time control system

NASA Astrophysics Data System (ADS)

Geng, Deli; Goodsell, Stephen J.; Basden, Alastair G.; Dipper, Nigel A.; Myers, Richard M.; Saunter, Chris D.

2006-06-01

Whilst the high throughput and low latency requirements for the next generation AO real-time control systems have posed a significant challenge to von Neumann architecture processor systems, the Field Programmable Gate Array (FPGA) has emerged as a long term solution with high performance on throughput and excellent predictability on latency. Moreover, FPGA devices have highly capable programmable interfacing, which lead to more highly integrated system. Nevertheless, a single FPGA is still not enough: multiple FPGA devices need to be clustered to perform the required subaperture processing and the reconstruction computation. In an AO real-time control system, the memory bandwidth is often the bottleneck of the system, simply because a vast amount of supporting data, e.g. pixel calibration maps and the reconstruction matrix, need to be accessed within a short period. The cluster, as a general computing architecture, has excellent scalability in processing throughput, memory bandwidth, memory capacity, and communication bandwidth. Problems, such as task distribution, node communication, system verification, are discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palomar, J.; Wyman, R.

This document provides recommendations to guide reviewers in the application of Programmable Logic Controllers (PLCS) to the control, monitoring and protection of nuclear reactors. The first topics addressed are system-level design issues, specifically including safety. The document then discusses concerns about the PLC manufacturing organization and the protection system engineering organization. Supplementing this document are two appendices. Appendix A summarizes PLC characteristics. Specifically addressed are those characteristics that make the PLC more suitable for emergency shutdown systems than other electrical/electronic-based systems, as well as characteristics that improve reliability of a system. Also covered are PLC characteristics that may create anmore » unsafe operating environment. Appendix B provides an overview of the use of programmable logic controllers in emergency shutdown systems. The intent is to familiarize the reader with the design, development, test, and maintenance phases of applying a PLC to an ESD system. Each phase is described in detail and information pertinent to the application of a PLC is pointed out.« less

Repurposing endogenous type I CRISPR-Cas systems for programmable gene repression

PubMed Central

Luo, Michelle L.; Mullis, Adam S.; Leenay, Ryan T.; Beisel, Chase L.

2015-01-01

CRISPR-Cas systems have shown tremendous promise as heterologous tools for genome editing and transcriptional regulation. Because these RNA-directed immune systems are found in most prokaryotes, an opportunity exists to harness the endogenous systems as convenient tools in these organisms. Here, we report that the Type I-E CRISPR-Cas system in Escherichia coli can be co-opted for programmable transcriptional repression. We found that deletion of the signature cas3 gene converted this immune system into a programmable gene regulator capable of reversible gene silencing of heterologous and endogenous genes. Targeting promoter regions yielded the strongest repression, whereas targeting coding regions showed consistent strand bias. Furthermore, multi-targeting CRISPR arrays could generate complex phenotypes. This strategy offers a simple approach to convert many endogenous Type I systems into transcriptional regulators, thereby expanding the available toolkit for CRISPR-mediated genetic control while creating new opportunities for genome-wide screens and pathway engineering. PMID:25326321

Programmable Phase Transitions in a Photonic Microgel System: Linking Soft Interactions to a Temporal pH Gradient.

PubMed

Go, Dennis; Rommel, Dirk; Chen, Lisa; Shi, Feng; Sprakel, Joris; Kuehne, Alexander J C

2017-02-28

Soft amphoteric microgel systems exhibit a rich phase behavior. Crystalline phases of these material systems are of interest because they exhibit photonic stop-gaps, giving rise to iridescent color. Such microgel systems are promising for applications in soft, switchable, and programmable photonic filters and devices. We here report a composite microgel system consisting of a hard and fluorescently labeled core and a soft, amphoteric microgel shell. At pH above the isoelectric point (IEP), these colloids easily crystallize into three-dimensional colloidal assemblies. By adding a cyclic lactone to the system, the temporal pH profile can be controlled, and the microgels can be programmed to melt, while they lose charge. When the microgels gain the opposite charge, they recrystallize into assemblies of even higher order. We provide a model system to study the dynamic phase behavior of soft particles and their switchable and programmable photonic effects.

Synchronized operation by field programmable gate array based signal controller for the Thomson scattering diagnostic system in KSTAR.

PubMed

Lee, W R; Kim, H S; Park, M K; Lee, J H; Kim, K H

2012-09-01

The Thomson scattering diagnostic system is successfully installed in the Korea Superconducting Tokamak Advanced Research (KSTAR) facility. We got the electron temperature and electron density data for the first time in 2011, 4th campaign using a field programmable gate array (FPGA) based signal control board. It operates as a signal generator, a detector, a controller, and a time measuring device. This board produces two configurable trigger pulses to operate Nd:YAG laser system and receives a laser beam detection signal from a photodiode detector. It allows a trigger pulse to be delivered to a time delay module to make a scattered signal measurement, measuring an asynchronous time value between the KSTAR timing board and the laser system injection signal. All functions are controlled by the embedded processor running on operating system within a single FPGA. It provides Ethernet communication interface and is configured with standard middleware to integrate with KSTAR. This controller has operated for two experimental campaigns including commissioning and performed the reconfiguration of logic designs to accommodate varying experimental situation without hardware rebuilding.

Application of programmable logic controllers to space simulation

NASA Technical Reports Server (NTRS)

Sushon, Janet

1992-01-01

Incorporating a state-of-the-art process control and instrumentation system into a complex system for thermal vacuum testing is discussed. The challenge was to connect several independent control systems provided by various vendors to a supervisory computer. This combination will sequentially control and monitor the process, collect the data, and transmit it to color a graphic system for subsequent manipulation. The vacuum system upgrade included: replacement of seventeen diffusion pumps with eight cryogenic pumps and one turbomolecular pump, replacing a relay based control system, replacing vacuum instrumentation, and upgrading the data acquisition system.

Continuous improvement in the Industrial and Management Systems Engineering programme at Kuwait University

NASA Astrophysics Data System (ADS)

Aldowaisan, Tariq; Allahverdi, Ali

2016-07-01

This paper describes the process employed by the Industrial and Management Systems Engineering programme at Kuwait University to continuously improve the programme. Using a continuous improvement framework, the paper demonstrates how various qualitative and quantitative analyses methods, such as hypothesis testing and control charts, have been applied to the results of four assessment tools and other data sources to improve performance. Important improvements include the need to reconsider two student outcomes as they were difficult to implement in courses. In addition, through benchmarking and the engagement of Alumni and Employers, key decisions were made to improve the curriculum and enhance employability.

An assessment of workplace programmes designed to control inhalation risks using respiratory protective equipment.

PubMed

Bell, Nikki; Vaughan, Nicholas P; Morris, Len; Griffin, Peter

2012-04-01

Few studies have assessed respiratory protective equipment (RPE) failures at the organizational level despite evidence to suggest that compliance with good practice may be low. The aim of this study was to develop an understanding of what current RPE programmes look like across industry and how this compares with good practice. Twenty cross-industry site visits were conducted with companies that had RPE programmes in place. Visits involved management interviews to explore current RPE systems and procedures and the decision making underpinning these. Observations of RPE operatives were included followed by short interviews to discuss the behaviours observed. Post-site assessments jointly undertaken by an RPE scientist and psychologist produced ratings for each site on six critical aspects of RPE programmes (knowledge/awareness, selection, use, training/information, supervision, and storage/cleaning/maintenance). Overall ratings for theoretical competence (i.e. management knowledge of RPE) and practical control (i.e. actual RPE practice on the shop floor) were also given. Qualitative analysis was performed on all interview data. The performance of RPE programmes varied across industry. Fewer than half the companies visited were considered to have an acceptable level of theoretical competence and practical control. Four distinct groups emerged from the 20 sites studied, ranging from Learners (low theoretical competence and practical control--four sites), Developers (acceptable theoretical competence and low practical control--five sites), and Fortuitous (low theoretical competence and acceptable practical control--two sites), to Proficient (acceptable theoretical competence and practical control--nine sites). None of the companies visited were achieving optimal control through the use of RPE. Widespread inadequacies were found with programme implementation, particularly training, supervision, and maintenance. Our taxonomy based on the four groups (Learners, Developers, Fortuitous, and Proficient) provided a useful expert-informed tool for explaining the variation in performance of RPE programmes across industry. Although further research and development are required, this taxonomy offers a useful starting point for the development of practical tools that may assist managers in making the much-needed improvements to all facets of programme implementation, particularly training, supervision, and maintenance.

Fabrication of core-shell micro/nanoparticles for programmable dual drug release by emulsion electrospraying

NASA Astrophysics Data System (ADS)

Wang, Yazhou; Zhang, Yiqiong; Wang, Bochu; Cao, Yang; Yu, Qingsong; Yin, Tieying

2013-06-01

The study aimed at constructing a novel drug delivery system for programmable multiple drug release controlled with core-shell structure. The core-shell structure consisted of chitosan nanoparticles as core and polyvinylpyrrolidone micro/nanocoating as shell to form core-shell micro/nanoparticles, which was fabricated by ionic gelation and emulsion electrospray methods. As model drug agents, Naproxen and rhodamine B were encapsulated in the core and shell regions, respectively. The core-shell micro/nanoparticles thus fabricated were characterized and confirmed by scanning electron microscope, transmission electron microscope, and fluorescence optical microscope. The core-shell micro/nanoparticles showed good release controllability through drug release experiment in vitro. It was noted that a programmable release pattern for dual drug agents was also achieved by adjusting their loading regions in the core-shell structures. The results indicate that emulsion electrospraying technology is a promising approach in fabrication of core-shell micro/nanoparticles for programmable dual drug release. Such a novel multi-drug delivery system has a potential application for the clinical treatment of cancer, tuberculosis, and tissue engineering.

A closed-loop control-loading system

NASA Technical Reports Server (NTRS)

Ashworth, B. R.; Parrish, R. V.

1979-01-01

Langley Differential Maneuvering Simulator (DMS) realistically simulates two aircraft operating in differential mode. It consists of two identical fixed-base cockpits and dome projection systems. Each projection system consists of sky/Earth projector and target-image generator and projector. Although programmable control forces are small part of overall system, they play large role in providing pilot with kinesthetic cues.

Advanced Electronic Systems. Curriculum Guide for Technology Education.

ERIC Educational Resources Information Center

Patrick, Dale R.

This curriculum for a 1-semester or 1-year course in electronics is designed to take students from basic through advanced electronic systems. It covers several electronic areas, such as digital electronics, communication electronics, industrial process control, instrumentation, programmable controllers, and robotics. The guide contains…

Fast and robust control of nanopositioning systems: Performance limits enabled by field programmable analog arrays.

PubMed

Baranwal, Mayank; Gorugantu, Ram S; Salapaka, Srinivasa M

2015-08-01

This paper aims at control design and its implementation for robust high-bandwidth precision (nanoscale) positioning systems. Even though modern model-based control theoretic designs for robust broadband high-resolution positioning have enabled orders of magnitude improvement in performance over existing model independent designs, their scope is severely limited by the inefficacies of digital implementation of the control designs. High-order control laws that result from model-based designs typically have to be approximated with reduced-order systems to facilitate digital implementation. Digital systems, even those that have very high sampling frequencies, provide low effective control bandwidth when implementing high-order systems. In this context, field programmable analog arrays (FPAAs) provide a good alternative to the use of digital-logic based processors since they enable very high implementation speeds, moreover with cheaper resources. The superior flexibility of digital systems in terms of the implementable mathematical and logical functions does not give significant edge over FPAAs when implementing linear dynamic control laws. In this paper, we pose the control design objectives for positioning systems in different configurations as optimal control problems and demonstrate significant improvements in performance when the resulting control laws are applied using FPAAs as opposed to their digital counterparts. An improvement of over 200% in positioning bandwidth is achieved over an earlier digital signal processor (DSP) based implementation for the same system and same control design, even when for the DSP-based system, the sampling frequency is about 100 times the desired positioning bandwidth.

The European Gonococcal Antimicrobial Surveillance Programme (Euro-GASP)--a sentinel approach in the European Union (EU)/European Economic Area (EEA).

PubMed

Spiteri, Gianfranco; Cole, Michelle; Unemo, Magnus; Hoffmann, Steen; Ison, Catherine; van de Laar, Marita

2013-12-01

Antimicrobial resistance in Neisseria gonorrhoeae is monitored in the European Union/European Economic Area through the European Gonococcal Antimicrobial Surveillance Programme (Euro-GASP) coordinated by the European Centre for Disease Prevention and Control. Euro-GASP includes a sentinel surveillance programme which aims to detect in a timely manner changes in resistance patterns and inform treatment guidelines. The programme aims to test a representative number of isolates from each European Union/European Economic Area member state per year for a range of therapeutically relevant antimicrobials through a biannual hybrid centralised/decentralised system. Testing is supported by an External Quality Assurance programme and a laboratory training programme. Participation in the programme has increased to 21 countries in 2012. Euro-GASP has been able to detect the rapid spread of isolates with decreased susceptibility to cefixime across Europe in 2010 and 2011. Results from the programme have informed changes in European treatment guidelines for gonorrhoea and led to the development of the 'Response plan to control and manage the threat of multidrug resistant gonorrhoea in Europe'. Future challenges for Euro-GASP include supporting countries to participate in Euro-GASP through decentralised testing, improving timeliness and epidemiological data quality, and increasing participation from Eastern Europe.

The safety of magnetic resonance imaging in patients with programmable implanted intrathecal drug delivery systems: a 3-year prospective study.

PubMed

De Andres, Jose; Villanueva, Vicente; Palmisani, Stefano; Cerda-Olmedo, German; Lopez-Alarcon, Maria Dolores; Monsalve, Vicente; Minguez, Ana; Martinez-Sanjuan, Vicente

2011-05-01

It is common clinical practice to perform magnetic resonance imaging (MRI) in patients with indwelling programmable intrathecal drug delivery (IDD) systems, although the safety of the procedure has never been documented. We performed a single-center, 3-year, prospective evaluation in patients with a programmable implanted IDD to assess patient discomfort, IDD technical failures, and adverse effects during and after exposure to MRI. Forty-three consecutive patients with an implanted programmable IDD system (SynchroMed® EL Implantable Infusion Pump, Model 8626L-18, and SynchroMed® II Model 8637-20, 8637-40; Medtronic, Inc., Minneapolis, MN) requiring a scheduled MRI evaluation were studied during a 3-year period. All MRI scans were performed with a 1.5-tesla clinical use magnet and a specific absorption rate of no more than 0.9 W/kg. Radiograph control was used to confirm postexposure pump rotor movement and detect system dislocations. IDD system failures, patient satisfaction, and discomfort were recorded. None of the patients experienced signs of drug overinfusion that could lead to hemodynamic, respiratory, or neurologic alterations. Radiologic evaluation after MRI revealed no spatial displacements of the intrathecal catheter tip or body pump, and programmer telemetry confirmed the infusion recovery. Patients' satisfaction after the procedure was high. Performing an MRI scan with the proposed protocol in patients with an implanted Medtronic programmable IDD system resulted in virtually no technical or medical complications. © 2011 International Anesthesia Research Society

Programmable release of multiple protein drugs from aptamer-functionalized hydrogels via nucleic acid hybridization.

PubMed

Battig, Mark R; Soontornworajit, Boonchoy; Wang, Yong

2012-08-01

Polymeric delivery systems have been extensively studied to achieve localized and controlled release of protein drugs. However, it is still challenging to control the release of multiple protein drugs in distinct stages according to the progress of disease or treatment. This study successfully demonstrates that multiple protein drugs can be released from aptamer-functionalized hydrogels with adjustable release rates at predetermined time points using complementary sequences (CSs) as biomolecular triggers. Because both aptamer-protein interactions and aptamer-CS hybridization are sequence-specific, aptamer-functionalized hydrogels constitute a promising polymeric delivery system for the programmable release of multiple protein drugs to treat complex human diseases.

Fault tolerant programmable digital attitude control electronics study

NASA Technical Reports Server (NTRS)

Sorensen, A. A.

1974-01-01

The attitude control electronics mechanization study to develop a fault tolerant autonomous concept for a three axis system is reported. Programmable digital electronics are compared to general purpose digital computers. The requirements, constraints, and tradeoffs are discussed. It is concluded that: (1) general fault tolerance can be achieved relatively economically, (2) recovery times of less than one second can be obtained, (3) the number of faulty behavior patterns must be limited, and (4) adjoined processes are the best indicators of faulty operation.

Meeting the requirements of importing countries: practice and policy for on-farm approaches to food safety.

PubMed

Dagg, P J; Butler, R J; Murray, J G; Biddle, R R

2006-08-01

In light of the increasing consumer demand for safe, high-quality food and recent public health concerns about food-borne illness, governments and agricultural industries are under pressure to provide comprehensive food safety policies and programmes consistent with international best practice. Countries that export food commodities derived from livestock must meet both the requirements of the importing country and domestic standards. It is internationally accepted that end-product quality control, and similar methods aimed at ensuring food safety, cannot adequately ensure the safety of the final product. To achieve an acceptable level of food safety, governments and the agricultural industry must work collaboratively to provide quality assurance systems, based on sound risk management principles, throughout the food supply chain. Quality assurance systems on livestock farms, as in other parts of the food supply chain, should address food safety using hazard analysis critical control point principles. These systems should target areas including biosecurity, disease monitoring and reporting, feedstuff safety, the safe use of agricultural and veterinary chemicals, the control of potential food-borne pathogens and traceability. They should also be supported by accredited training programmes, which award certification on completion, and auditing programmes to ensure that both local and internationally recognised guidelines and standards continue to be met. This paper discusses the development of policies for on-farm food safety measures and their practical implementation in the context of quality assurance programmes, using the Australian beef industry as a case study.

Programmable Logic Controller Modification Attacks for use in Detection Analysis

DTIC Science & Technology

2014-03-27

and J. Lowe, “The Myths and Facts Behind Cyber Security Risks for Industrial Control Systems ,” in Proceedings of the VDE Kongress, vol. 116, 2004. [13...Feb 2014 Date 20 Feb 2014 Date 20 Feb 2014 Date AFIT-ENG-14-M-66 Abstract Unprotected Supervisory Control and Data Acquisition (SCADA) systems offer...control and monitor physical industrial processes. Although attacks targeting SCADA systems have increased, there has been little work exploring the

Self-Adaptive System based on Field Programmable Gate Array for Extreme Temperature Electronics

NASA Technical Reports Server (NTRS)

Keymeulen, Didier; Zebulum, Ricardo; Rajeshuni, Ramesham; Stoica, Adrian; Katkoori, Srinivas; Graves, Sharon; Novak, Frank; Antill, Charles

2006-01-01

In this work, we report the implementation of a self-adaptive system using a field programmable gate array (FPGA) and data converters. The self-adaptive system can autonomously recover the lost functionality of a reconfigurable analog array (RAA) integrated circuit (IC) [3]. Both the RAA IC and the self-adaptive system are operating in extreme temperatures (from 120 C down to -180 C). The RAA IC consists of reconfigurable analog blocks interconnected by several switches and programmable by bias voltages. It implements filters/amplifiers with bandwidth up to 20 MHz. The self-adaptive system controls the RAA IC and is realized on Commercial-Off-The-Shelf (COTS) parts. It implements a basic compensation algorithm that corrects a RAA IC in less than a few milliseconds. Experimental results for the cold temperature environment (down to -180 C) demonstrate the feasibility of this approach.

Field-programmable gate array-controlled sweep velocity-locked laser pulse generator

NASA Astrophysics Data System (ADS)

Chen, Zhen; Hefferman, Gerald; Wei, Tao

2017-05-01

A field-programmable gate array (FPGA)-controlled sweep velocity-locked laser pulse generator (SV-LLPG) design based on an all-digital phase-locked loop (ADPLL) is proposed. A distributed feedback laser with modulated injection current was used as a swept-frequency laser source. An open-loop predistortion modulation waveform was calibrated using a feedback iteration method to initially improve frequency sweep linearity. An ADPLL control system was then implemented using an FPGA to lock the output of a Mach-Zehnder interferometer that was directly proportional to laser sweep velocity to an on-board system clock. Using this system, linearly chirped laser pulses with a sweep bandwidth of 111.16 GHz were demonstrated. Further testing evaluating the sensing utility of the system was conducted. In this test, the SV-LLPG served as the swept laser source of an optical frequency-domain reflectometry system used to interrogate a subterahertz range fiber structure (sub-THz-FS) array. A static strain test was then conducted and linear sensor results were observed.

Addressing poverty through disease control programmes: examples from Tuberculosis control in India.

PubMed

Kamineni, Vishnu Vardhan; Wilson, Nevin; Das, Anand; Satyanarayana, Srinath; Chadha, Sarabjit; Sachdeva, Kuldeep Singh; Chauhan, Lakbir Singh

2012-03-26

Tuberculosis remains a major public health problem in India with the country accounting for one-fifth or 21% of all tuberculosis cases reported globally. The purpose of the study was to obtain an understanding on pro-poor initiatives within the framework of tuberculosis control programme in India and to identify mechanisms to improve the uptake and access to TB services among the poor. A national level workshop was held with participation from all relevant stakeholder groups. This study conducted during the stakeholder workshop adopted participatory research methods. The data was elicited through consultative and collegiate processes. The research study also factored information from primary and secondary sources that included literature review examining poverty headcount ratios and below poverty line population in the country; and quasi-profiling assessments to identify poor, backward and tribal districts as defined by the TB programme in India. Results revealed that current pro-poor initiatives in TB control included collaboration with private providers and engaging community to improve access among the poor to TB diagnostic and treatment services. The participants identified gaps in existing pro-poor strategies that related to implementation of advocacy, communication and social mobilisation; decentralisation of DOT; and incentives for the poor through the available schemes for public-private partnerships and provided key recommendations for action. Synergies between TB control programme and centrally sponsored social welfare schemes and state specific social welfare programmes aimed at benefitting the poor were unclear. Further in-depth analysis and systems/policy/operations research exploring pro-poor initiatives, in particular examining service delivery synergies between existing poverty alleviation schemes and TB control programme is essential. The understanding, reflection and knowledge of the key stakeholders during this participatory workshop provides recommendations for action, further planning and research on pro-poor TB centric interventions in the country.

Development and testing of the Rho Sigma Incorporated microprocessor control subsystem

NASA Technical Reports Server (NTRS)

Hankins, J. D.

1979-01-01

Product development and performance tests of three programmable microprocessor controllers for use with solar heating and cooling systems are presented. The products were developed to be marketable for public use.

A dual-task home-based rehabilitation programme for improving balance control in patients with acquired brain injury: a single-blind, randomized controlled pilot study.

PubMed

Peirone, Eliana; Goria, Paolo Filiberto; Anselmino, Arianna

2014-04-01

To evaluate the safety, feasibility and effectiveness of a dual-task home-based rehabilitation programme on balance impairments among adult patients with acquired brain injury. Single-blind, randomized controlled pilot study. Single rehabilitation centre. Sixteen participants between 12 and 18 months post-acquired brain injury with balance impairments and a score <10 seconds on the One-Leg Stance Test (eyes open). All participants received 50-minutes individualised traditional physiotherapy sessions three times a week for seven weeks. In addition, the intervention group (N = 8) performed an individualised dual-task home-based programme six days a week for seven weeks. The primary outcome measure was the Balance Evaluation System Test; secondary measures were the Activities-specific Balance Confidence Scale and Goal Attainment Scaling. At the end of the pilot study, the intervention group showed significantly greater improvement in Balance Evaluation System Test scores (17.87, SD 6.05) vs. the control group (5.5, SD 3.53; P = 0.008, r = 0.63). There was no significant difference in improvement in Activities-specific Balance Confidence Scale scores between the intervention group (25.25, SD 25.51) and the control group (7.00, SD 14.73; P = 0.11, r = 0.63). There was no significant improvement in Goal Attainment Scaling scores in the intervention (19.37, SD 9.03) vs. the control group (16.28, SD 6.58; P = 0.093, r = 0.63). This pilot study shows the safety, feasibility and short-term benefit of a dual-task home-based rehabilitation programme to improve balance control in patients with acquired brain injury. A sample size of 26 participants is required for a definitive study.

pH-programmable DNA logic arrays powered by modular DNAzyme libraries.

PubMed

Elbaz, Johann; Wang, Fuan; Remacle, Francoise; Willner, Itamar

2012-12-12

Nature performs complex information processing circuits, such the programmed transformations of versatile stem cells into targeted functional cells. Man-made molecular circuits are, however, unable to mimic such sophisticated biomachineries. To reach these goals, it is essential to construct programmable modular components that can be triggered by environmental stimuli to perform different logic circuits. We report on the unprecedented design of artificial pH-programmable DNA logic arrays, constructed by modular libraries of Mg(2+)- and UO(2)(2+)-dependent DNAzyme subunits and their substrates. By the appropriate modular design of the DNA computation units, pH-programmable logic arrays of various complexities are realized, and the arrays can be erased, reused, and/or reprogrammed. Such systems may be implemented in the near future for nanomedical applications by pH-controlled regulation of cellular functions or may be used to control biotransformations stimulated by bacteria.

Modernization of B-2 Data, Video, and Control Systems Infrastructure

NASA Technical Reports Server (NTRS)

Cmar, Mark D.; Maloney, Christian T.; Butala, Vishal D.

2012-01-01

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) Plum Brook Station (PBS) Spacecraft Propulsion Research Facility, commonly referred to as B-2, is NASA s third largest thermal-vacuum facility with propellant systems capability. B-2 has completed a modernization effort of its facility legacy data, video and control systems infrastructure to accommodate modern integrated testing and Information Technology (IT) Security requirements. Integrated systems tests have been conducted to demonstrate the new data, video and control systems functionality and capability. Discrete analog signal conditioners have been replaced by new programmable, signal processing hardware that is integrated with the data system. This integration supports automated calibration and verification of the analog subsystem. Modern measurement systems analysis (MSA) tools are being developed to help verify system health and measurement integrity. Legacy hard wired digital data systems have been replaced by distributed Fibre Channel (FC) network connected digitizers where high speed sampling rates have increased to 256,000 samples per second. Several analog video cameras have been replaced by digital image and storage systems. Hard-wired analog control systems have been replaced by Programmable Logic Controllers (PLC), fiber optic networks (FON) infrastructure and human machine interface (HMI) operator screens. New modern IT Security procedures and schemes have been employed to control data access and process control flows. Due to the nature of testing possible at B-2, flexibility and configurability of systems has been central to the architecture during modernization.

Modernization of B-2 Data, Video, and Control Systems Infrastructure

NASA Technical Reports Server (NTRS)

Cmar, Mark D.; Maloney, Christian T.; Butala, Vishal D.

2012-01-01

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) Plum Brook Station (PBS) Spacecraft Propulsion Research Facility, commonly referred to as B-2, is NASA's third largest thermal-vacuum facility with propellant systems capability. B-2 has completed a modernization effort of its facility legacy data, video and control systems infrastructure to accommodate modern integrated testing and Information Technology (IT) Security requirements. Integrated systems tests have been conducted to demonstrate the new data, video and control systems functionality and capability. Discrete analog signal conditioners have been replaced by new programmable, signal processing hardware that is integrated with the data system. This integration supports automated calibration and verification of the analog subsystem. Modern measurement systems analysis (MSA) tools are being developed to help verify system health and measurement integrity. Legacy hard wired digital data systems have been replaced by distributed Fibre Channel (FC) network connected digitizers where high speed sampling rates have increased to 256,000 samples per second. Several analog video cameras have been replaced by digital image and storage systems. Hard-wired analog control systems have been replaced by Programmable Logic Controllers (PLC), fiber optic networks (FON) infrastructure and human machine interface (HMI) operator screens. New modern IT Security procedures and schemes have been employed to control data access and process control flows. Due to the nature of testing possible at B-2, flexibility and configurability of systems has been central to the architecture during modernization.

Eye vision system using programmable micro-optics and micro-electronics

NASA Astrophysics Data System (ADS)

Riza, Nabeel A.; Amin, M. Junaid; Riza, Mehdi N.

2014-02-01

Proposed is a novel eye vision system that combines the use of advanced micro-optic and microelectronic technologies that includes programmable micro-optic devices, pico-projectors, Radio Frequency (RF) and optical wireless communication and control links, energy harvesting and storage devices and remote wireless energy transfer capabilities. This portable light weight system can measure eye refractive powers, optimize light conditions for the eye under test, conduct color-blindness tests, and implement eye strain relief and eye muscle exercises via time sequenced imaging. Described is the basic design of the proposed system and its first stage system experimental results for vision spherical lens refractive error correction.

Private Practitioners' Perspectives on Their Involvement With the Tuberculosis Control Programme in a Southern Indian State.

PubMed

Salve, Solomon; Sheikh, Kabir; Porter, John Dh

2016-05-08

Public and private health sectors both play a crucial role in the health systems of low- and middle-income countries (LMICs). The tuberculosis (TB) control strategy in India encourages the public sector to actively partner with private practitioners (PPs) to improve the quality of front line service delivery. However, ensuring effective and sustainable involvement of PPs constitutes a major challenge. This paper reports the findings from an empirical study focusing on the perspectives and experiences of PPs towards their involvement in TB control programme in India. The study was carried out between November 2010 and December 2011 in a district of a Southern Indian State and utilised qualitative methodologies, combining observations and in-depth interviews with 21 PPs from different medical systems. The collected data was coded and analysed using thematic analysis. PPs perceived themselves to be crucial healthcare providers, with different roles within the public-private mix (PPM) TB policy. Despite this, PPs felt neglected and undervalued in the actual process of implementation of the PPM-TB policy. The entire process was considered to be government driven and their professional skills and knowledge of different medical systems remained unrecognised at the policy level, and weakened their relationship and bond with the policy and with the programme. PPs had contrasting perceptions about the different components of the TB programme that demonstrated the public sector's dominance in the overall implementation of the DOTS strategy. Although PPs felt responsible for their TB patients, they found it difficult to perceive themselves as 'partners with the TB programme.' Public-private partnerships (PPPs) are increasingly utilized as a public health strategy to strengthen health systems. These policies will fail if the concerns of the PPs are neglected. To ensure their long-term involvement in the programme the abilities of PPs and the important perspectives from other Indian medical systems need to be recognised and supported. © 2016 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Programmer's Reference Manual for Dynamic Display Software System

DOT National Transportation Integrated Search

1971-01-01

In 1968, the display sysems group of the Systems Laboratory of the NASA/Electronics Research Center undertook a research task in the area of computer controlled flight information systems for aerospace application. The display laboratory of the Trans...

A Low-Power High-Speed Smart Sensor Design for Space Exploration Missions

NASA Technical Reports Server (NTRS)

Fang, Wai-Chi

1997-01-01

A low-power high-speed smart sensor system based on a large format active pixel sensor (APS) integrated with a programmable neural processor for space exploration missions is presented. The concept of building an advanced smart sensing system is demonstrated by a system-level microchip design that is composed with an APS sensor, a programmable neural processor, and an embedded microprocessor in a SOI CMOS technology. This ultra-fast smart sensor system-on-a-chip design mimics what is inherent in biological vision systems. Moreover, it is programmable and capable of performing ultra-fast machine vision processing in all levels such as image acquisition, image fusion, image analysis, scene interpretation, and control functions. The system provides about one tera-operation-per-second computing power which is a two order-of-magnitude increase over that of state-of-the-art microcomputers. Its high performance is due to massively parallel computing structures, high data throughput rates, fast learning capabilities, and advanced VLSI system-on-a-chip implementation.

Application of multimedia-based exercise programmes focused on improvement of the schoolgirls' musculoskeletal system during breaks between classes

NASA Astrophysics Data System (ADS)

Bendíková, Elena

2017-11-01

This pilot study presents theoretical basis related to the purpose and methodology of the presented research the aim of which is to point to the importance of multimedia-based physical activity (exercise programme) done during breaks between classes. The purpose of this programme is to prevent occurrence of functional disorders of the musculoskeletal system among schoolchildren. The experimental and control groups were composed of the female students of the third grade at one secondary school in the town of L. Mikuláš. We obtained the data by means of standardized methods used for assessment of the musculoskeletal system in medical and physical education practice. The obtained qualitative and quantitative data were processed by means of the chi-squared test and the non-parametric Wilcoxon signed-rank test. The results significantly (p<0.01) proved a positive effect of the multimedia-based exercise programme on the experimental group (Mwwtest=8.639, p<0.01), especially the positive and significant (p<0.01, p<0.05) effect on the functional status of the muscular system.

A Research Agenda for Helminth Diseases of Humans: Social Ecology, Environmental Determinants, and Health Systems

PubMed Central

Gazzinelli, Andrea; Correa-Oliveira, Rodrigo; Yang, Guo-Jing; Boatin, Boakye A.; Kloos, Helmut

2012-01-01

In this paper, the Disease Reference Group on Helminth Infections (DRG4), established in 2009 by the Special Programme for Research and Training in Tropical Diseases (TDR), with the mandate to review helminthiases research and identify research priorities and gaps, focuses on the environmental, social, behavioural, and political determinants of human helminth infections and outlines a research and development agenda for the socioeconomic and health systems research required for the development of sustainable control programmes. Using Stockols' social-ecological approach, we describe the role of various social (poverty, policy, stigma, culture, and migration) and environmental determinants (the home environment, water resources development, and climate change) in the perpetuation of helminthic diseases, as well as their impact as contextual factors on health promotion interventions through both the regular and community-based health systems. We examine these interactions in regard to community participation, intersectoral collaboration, gender, and possibilities for upscaling helminthic disease control and elimination programmes within the context of integrated and interdisciplinary approaches. The research agenda summarises major gaps that need to be addressed. PMID:22545168

Concept report: Microprocessor control of electrical power system

NASA Technical Reports Server (NTRS)

Perry, E.

1977-01-01

An electrical power system which uses a microprocessor for systems control and monitoring is described. The microprocessor controlled system permits real time modification of system parameters for optimizing a system configuration, especially in the event of an anomaly. By reducing the components count, the assembling and testing of the unit is simplified, and reliability is increased. A resuable modular power conversion system capable of satisfying a large percentage of space applications requirements is examined along with the programmable power processor. The PC global controller which handles systems control and external communication is analyzed, and a software description is given. A systems application summary is also included.

Java simulations of embedded control systems.

PubMed

Farias, Gonzalo; Cervin, Anton; Arzén, Karl-Erik; Dormido, Sebastián; Esquembre, Francisco

2010-01-01

This paper introduces a new Open Source Java library suited for the simulation of embedded control systems. The library is based on the ideas and architecture of TrueTime, a toolbox of Matlab devoted to this topic, and allows Java programmers to simulate the performance of control processes which run in a real time environment. Such simulations can improve considerably the learning and design of multitasking real-time systems. The choice of Java increases considerably the usability of our library, because many educators program already in this language. But also because the library can be easily used by Easy Java Simulations (EJS), a popular modeling and authoring tool that is increasingly used in the field of Control Education. EJS allows instructors, students, and researchers with less programming capabilities to create advanced interactive simulations in Java. The paper describes the ideas, implementation, and sample use of the new library both for pure Java programmers and for EJS users. The JTT library and some examples are online available on http://lab.dia.uned.es/jtt.

Java Simulations of Embedded Control Systems

PubMed Central

Farias, Gonzalo; Cervin, Anton; Årzén, Karl-Erik; Dormido, Sebastián; Esquembre, Francisco

2010-01-01

This paper introduces a new Open Source Java library suited for the simulation of embedded control systems. The library is based on the ideas and architecture of TrueTime, a toolbox of Matlab devoted to this topic, and allows Java programmers to simulate the performance of control processes which run in a real time environment. Such simulations can improve considerably the learning and design of multitasking real-time systems. The choice of Java increases considerably the usability of our library, because many educators program already in this language. But also because the library can be easily used by Easy Java Simulations (EJS), a popular modeling and authoring tool that is increasingly used in the field of Control Education. EJS allows instructors, students, and researchers with less programming capabilities to create advanced interactive simulations in Java. The paper describes the ideas, implementation, and sample use of the new library both for pure Java programmers and for EJS users. The JTT library and some examples are online available on http://lab.dia.uned.es/jtt. PMID:22163674

Programmable temperature control system for biological materials

NASA Technical Reports Server (NTRS)

Anselmo, V. J.; Harrison, R. G.; Rinfret, A. P.

1982-01-01

A system was constructed which allows programmable temperature-time control for a 5 cu cm sample volume of arbitrary biological material. The system also measures the parameters necessary for the determination of the sample volume specific heat and thermal conductivity as a function of temperature, and provides a detailed measurement of the temperature during phase change and a means of calculating the heat of the phase change. Steady-state and dynamic temperature control is obtained by supplying heat to the sample volume through resistive elements constructed as an integral part of the sample container. For cooling purposes, this container is totally immersed into a cold heat sink. Using a mixture of dry ice and alcohol at 79 C, the sample volume can be controlled from +40 to -60 C at rates from steady state to + or - 65 C/min. Steady-state temperature precision is better than 0.2 C, while the dynamic capability depends on the temperature rate of change as well as the mass of both the sample and the container.

Improving the cost-effectiveness of IRS with climate informed health surveillance systems

PubMed Central

Worrall, Eve; Connor, Stephen J; Thomson, Madeleine C

2008-01-01

Background This paper examines how the cost-effectiveness of IRS varies depending on the severity of transmission and level of programme coverage and how efficiency could be improved by incorporating climate information into decision making for malaria control programmes as part of an integrated Malaria Early Warning and Response System (MEWS). Methods A climate driven model of malaria transmission was used to simulate cost-effectiveness of alternative IRS coverage levels over six epidemic and non-epidemic years. Decision rules for a potential MEWS system that triggers different IRS coverage are described. The average and marginal cost per case averted with baseline IRS coverage (24%) and under varying IRS coverage levels (50%, 75% and 100%) were calculated. Results Average cost-effectiveness of 24% coverage varies dramatically between years, from US$108 per case prevented in low transmission to US$0.42 in epidemic years. Similarly for higher coverage (24–100%) cost per case prevented is far higher in low than high transmission years ($108–$267 to $0.88–$2.26). Discussion Efficiency and health benefit gains could be achieved by implementing MEWS that provides timely, accurate information. Evidence from southern Africa, (especially Botswana) supports this. Conclusion Advance knowledge of transmission severity can help managers make coverage decisions which optimise resource use and exploit efficiency gains if a fully integrated MEWS is in place alongside a health system with sufficient flexibility to modify control plans in response to information. More countries and programmes should be supported to use the best available evidence and science to integrate climate informed MEWS into decision making within malaria control programmes. PMID:19108723

Proceedings, 15th Annual Meeting, Aquatic Plant Control Research Planning and Operations Review, held 17-20 November 1980, Savannah, Georgia.

DTIC Science & Technology

1981-10-01

transmitter/ receiver (the AGNAV guidance system), a TI - 59 programmable calculator with a TI PC-1O0 thermal printer and direct current (DC) to alternating...the TI - 59 programmable calculator mounted on the TI PC-100 thermal printer and the 12-v DC to 120-v AC inverter. Power for both the mobile and...dropped, the new A2 B2 distances are keyed into the calculator, and * Magnetic cards, readable on a TI - 59 programmable calculator , with all programs

Uniaxial three-dimensional shape measurement with multioperation modes for different modulation algorithms

NASA Astrophysics Data System (ADS)

Jing, Hailong; Su, Xianyu; You, Zhisheng

2017-03-01

A uniaxial three-dimensional shape measurement system with multioperation modes for different modulation algorithms is proposed. To provide a general measurement platform that satisfies the specific measurement requirements in different application scenarios, a measuring system with multioperation modes based on modulation measuring profilometry (MMP) is presented. Unlike the previous solutions, vertical scanning by focusing control of an electronic focus (EF) lens is implemented. The projection of a grating pattern is based on a digital micromirror device, which means fast phase-shifting with high precision. A field programmable gate array-based master control center board acts as the coordinator of the MMP system; it harmonizes the workflows, such as grating projection, focusing control of the EF lens, and fringe pattern capture. Fourier transform, phase-shifting technique, and temporary Fourier transform are used for modulation analysis in different operation modes. The proposed system features focusing control, speed, programmability, compactness, and availability. This paper details the principle of MMP for multioperation modes and the design of the proposed system. The performances of different operation modes are analyzed and compared, and a work piece with steep holes is measured to verify this multimode MMP system.

Psychosocial behaviour management programme for home-dwelling people with dementia: A cluster-randomized controlled trial.

PubMed

Nakanishi, Miharu; Endo, Kaori; Hirooka, Kayo; Granvik, Eva; Minthon, Lennart; Nägga, Katarina; Nishida, Atsushi

2018-03-01

Little is known about the effectiveness of a psychosocial behaviour management programme on home-dwelling people with dementia. We developed a Behaviour Analytics & Support Enhancement (BASE) programme for care managers and professional caregivers of home care services in Japan. We investigated the effects of BASE on challenging behaviour of home-dwelling people with dementia. A cluster-randomized controlled trial was conducted with home care providers from 3 different districts in Tokyo. Each provider recruited persons with dementia aged 65 years or older to receive home care in the BASE programme in August 2016. An online monitoring and assessment system was introduced to the intervention group for repeated measures of challenging behaviour with a total score of the Neuropsychiatric Inventory. Care professionals in both the intervention and control groups evaluated challenging behaviour of persons with dementia at baseline (September 2016) and follow-up (February 2017). A majority of persons with dementia had Alzheimer disease (59.3%). One-hundred and forty-one persons with dementia were included in the intervention group and 142 in the control group. Multilevel modelling revealed a significant reduction in challenging behaviour in the intervention group after 6 months (mean score, 18.3 to 11.2) compared with that of the control group (11.6 to 10.8; P < .05). The implementation of the BASE programme resulted in a reduction of challenging behaviour of home-dwelling people with dementia. Future research should examine the long-term effects of behaviour management programmes on behaviour, nursing home placement, and hospital admission of home-dwelling people with dementia. Copyright © 2017 John Wiley & Sons, Ltd.

Disease intelligence for highly pathogenic avian influenza.

PubMed

Domenech, J; Slingenbergh, J; Martin, V; McLeod, A; Lubroth, J; Sims, L D

2007-01-01

A comprehensive approach to highly pathogenic avian influenza (HPAI) is crucial for identifying all the factors that contribute to its emergence, spread and persistence. Epidemiological understanding makes it possible to predict the evolution of the virus and to prevent and control the socioeconomic, environmental, institutional and policy consequences. At FAO, risk assessment and intelligence with regard to HPAI are based on lessons learnt from assisting countries to design strategies and on implementation of technical assistance programmes, which reveal important elements, such as the roles of ducks, live-bird markets and trade. Wild birds were found to contribute, by transporting the H5N1 virus over long distances. The contributions of different poultry farming systems and market chains in the epidemiology of HPAI are well recognized; however, the respective roles of smallholder systems and commercial farms are unclear. FAO considers that smallholders will continue to be an important factor and should be taken into account in control and prevention programmes. Changes in poultry farming are essentially driven by the private sector and market forces and could have negative consequences on the livelihoods of smallholders and on ecologically balanced production systems and agricultural biodiversity. Biosecurity can, however, be improved at the level of farms and markets. Institutional factors, such as the capacity of animal health systems to deliver control programmes, are also important, requiring strengthening and innovation in risk analysis and management.

RS-600 programmable controller: Solar heating and cooling

NASA Technical Reports Server (NTRS)

1978-01-01

Three identical microprocessor control subsystems were developed which can be used in heating, heating and cooling, and/or hot water systems for single family, multifamily, or commercial applications. The controller incorporates a low cost, highly reliable (all solid state) microprocessor which can be easily reprogrammed.

Enhanced Control for Local Helicity Injection on the Pegasus ST

NASA Astrophysics Data System (ADS)

Pierren, C.; Bongard, M. W.; Fonck, R. J.; Lewicki, B. T.; Perry, J. M.

2017-10-01

Local helicity injection (LHI) experiments on Pegasus rely upon programmable control of a 250 MVA modular power supply system that drives the electromagnets and helicity injection systems. Precise control of the central solenoid is critical to experimental campaigns that test the LHI Taylor relaxation limit and the coupling efficiency of LHI-produced plasmas to Ohmic current drive. Enhancement and expansion of the present control system is underway using field programmable gate array (FPGA) technology for digital logic and control, coupled to new 10 MHz optical-to-digital transceivers for semiconductor level device communication. The system accepts optical command signals from existing analog feedback controllers, transmits them to multiple devices in parallel H-bridges, and aggregates their status signals for fault detection. Present device-level multiplexing/de-multiplexing and protection logic is extended to include bridge-level protections with the FPGA. An input command filter protects against erroneous and/or spurious noise generated commands that could otherwise cause device failures. Fault registration and response times with the FPGA system are 25 ns. Initial system testing indicates an increased immunity to power supply induced noise, enabling plasma operations at higher working capacitor bank voltage. This can increase the applied helicity injection drive voltage, enable longer pulse lengths and improve Ohmic loop voltage control. Work supported by US DOE Grant DE-FG02-96ER54375.

Programmable Thermostat Module Upgrade for the Multipurpose Logistics Module

NASA Technical Reports Server (NTRS)

Clark, D. W.; Glasgow, S. d.; Reagan, S. E.; Presson, K. H.; Howard, D. E.; Smith, D. A.

2007-01-01

The STS-121/ULF 1.1 mission was the maiden flight of the programmable thermostat module (PTM) system used to control the 28 V shell heaters on the multi-purpose logistics module (MPLM). These PTMs, in conjunction with a data recorder module (DRM), provide continuous closed loop temperature control and data recording of MPLM on-orbit heater operations. This Technical Memorandum discusses the hardware design, development, test, and verification (DDT&V) activities performed at the Marshall Space Flight Center as well as the operational implementation and mission performance.

Programmable Thermostat Module Upgrade for the Multi-Purpose Logistics Module

NASA Technical Reports Server (NTRS)

Clark, Dallas; Glasgow, Shaun; Reagan, Shawn; Presson, Keith; Howard, David; Smith, Dennis

2007-01-01

The STS-121/ULF1.1 mission was the maiden flight of the Programmable Thermostat Module (PTM) system used to control the 28 V shell heaters on the Multi-Purpose Logistics Module (MPLM). These PTMs, in conjunction with a Data Recorder Module (DRM), provide continuous closed loop temperature control and data recording of MPLM on-orbit heater operations. This paper will discuss the hardware design, development, test and verification (DDT&V) activities performed at the Marshall Space Flight Center (MSFC) as well as the operational implementation and mission performance.

Immunisation Information Systems – useful tools for monitoring vaccination programmes in EU/EEA countries, 2016

PubMed Central

Derrough, Tarik; Olsson, Kate; Gianfredi, Vincenza; Simondon, Francois; Heijbel, Harald; Danielsson, Niklas; Kramarz, Piotr; Pastore-Celentano, Lucia

2017-01-01

Immunisation Information Systems (IIS) are computerised confidential population based-systems containing individual-level information on vaccines received in a given area. They benefit individuals directly by ensuring vaccination according to the schedule and they provide information to vaccine providers and public health authorities responsible for the delivery and monitoring of an immunisation programme. In 2016, the European Centre for Disease Prevention and Control (ECDC) conducted a survey on the level of implementation and functionalities of IIS in 30 European Union/European Economic Area (EU/EEA) countries. It explored the governance and financial support for the systems, IIS software, system characteristics in terms of population, identification of immunisation recipients, vaccinations received, and integration with other health record systems, the use of the systems for surveillance and programme management as well as the challenges involved with implementation. The survey was answered by 27 of the 30 EU/EEA countries having either a system in production at national or subnational levels (n = 16), or being piloted (n = 5) or with plans for setting up a system in the future (n = 6). The results demonstrate the added-value of IIS in a number of areas of vaccination programme monitoring such as monitoring vaccine coverage at local geographical levels, linking individual immunisation history with health outcome data for safety investigations, monitoring vaccine effectiveness and failures and as an educational tool for both vaccine providers and vaccine recipients. IIS represent a significant way forward for life-long vaccination programme monitoring. PMID:28488999

Immunisation Information Systems - useful tools for monitoring vaccination programmes in EU/EEA countries, 2016.

PubMed

Derrough, Tarik; Olsson, Kate; Gianfredi, Vincenza; Simondon, Francois; Heijbel, Harald; Danielsson, Niklas; Kramarz, Piotr; Pastore-Celentano, Lucia

2017-04-27

Immunisation Information Systems (IIS) are computerised confidential population based-systems containing individual-level information on vaccines received in a given area. They benefit individuals directly by ensuring vaccination according to the schedule and they provide information to vaccine providers and public health authorities responsible for the delivery and monitoring of an immunisation programme. In 2016, the European Centre for Disease Prevention and Control (ECDC) conducted a survey on the level of implementation and functionalities of IIS in 30 European Union/European Economic Area (EU/EEA) countries. It explored the governance and financial support for the systems, IIS software, system characteristics in terms of population, identification of immunisation recipients, vaccinations received, and integration with other health record systems, the use of the systems for surveillance and programme management as well as the challenges involved with implementation. The survey was answered by 27 of the 30 EU/EEA countries having either a system in production at national or subnational levels (n = 16), or being piloted (n = 5) or with plans for setting up a system in the future (n = 6). The results demonstrate the added-value of IIS in a number of areas of vaccination programme monitoring such as monitoring vaccine coverage at local geographical levels, linking individual immunisation history with health outcome data for safety investigations, monitoring vaccine effectiveness and failures and as an educational tool for both vaccine providers and vaccine recipients. IIS represent a significant way forward for life-long vaccination programme monitoring. This article is copyright of The Authors, 2017.

Programmable logic controller optical fibre sensor interface module

NASA Astrophysics Data System (ADS)

Allwood, Gary; Wild, Graham; Hinckley, Steven

2011-12-01

Most automated industrial processes use Distributed Control Systems (DCSs) or Programmable Logic Controllers (PLCs) for automated control. PLCs tend to be more common as they have much of the functionality of DCSs, although they are generally cheaper to install and maintain. PLCs in conjunction with a human machine interface form the basis of Supervisory Control And Data Acquisition (SCADA) systems, combined with communication infrastructure and Remote Terminal Units (RTUs). RTU's basically convert different sensor measurands in to digital data that is sent back to the PLC or supervisory system. Optical fibre sensors are becoming more common in industrial processes because of their many advantageous properties. Being small, lightweight, highly sensitive, and immune to electromagnetic interference, means they are an ideal solution for a variety of diverse sensing applications. Here, we have developed a PLC Optical Fibre Sensor Interface Module (OFSIM), in which an optical fibre is connected directly to the OFSIM located next to the PLC. The embedded fibre Bragg grating sensors, are highly sensitive and can detect a number of different measurands such as temperature, pressure and strain without the need for a power supply.

Implementing the NHS information technology programme: qualitative study of progress in acute trusts.

PubMed

Hendy, Jane; Fulop, Naomi; Reeves, Barnaby C; Hutchings, Andrew; Collin, Simon

2007-06-30

To describe progress and perceived challenges in implementing the NHS information and technology (IT) programme in England. Case studies and in-depth interviews, with themes identified using a framework developed from grounded theory. We interviewed personnel who had been interviewed 18 months earlier, or new personnel in the same posts. Four NHS acute hospital trusts in England. Senior trust managers and clinicians, including chief executives, directors of IT, medical directors, and directors of nursing. Interviewees unreservedly supported the goals of the programme but had several serious concerns. As before, implementation is hampered by local financial deficits, delays in implementing patient administration systems that are compliant with the programme, and poor communication between Connecting for Health (the agency responsible for the programme) and local managers. New issues were raised. Local managers cannot prioritise implementing the programme because of competing financial priorities and uncertainties about the programme. They perceive a growing risk to patients' safety associated with delays and a loss of integration of components of the programme, and are discontented with Choose and Book (electronic booking for referrals from primary care). We recommend that the programme sets realistic timetables for individual trusts and advises managers about interim IT systems they have to purchase because of delays outside their control. Advice needs to be mindful of the need for trusts to ensure longer term compatibility with the programme and value for money. Trusts need assistance in prioritising modernisation of IT by, for example, including implementation of the programme in the performance management framework. Even with Connecting for Health adopting a different approach of setting central standards with local implementation, these issues will still need to be addressed. Lessons learnt in the NHS have wider relevance as healthcare systems, such as in France and Australia, look to realise the potential of large scale IT modernisation.

A programmable heater control circuit for spacecraft

NASA Technical Reports Server (NTRS)

Nguyen, D. D.; Owen, J. W.; Smith, D. A.; Lewter, W. J.

1994-01-01

Spacecraft thermal control is accomplished for many components through use of multilayer insulation systems, electrical heaters, and radiator systems. The heaters are commanded to maintain component temperatures within design specifications. The programmable heater control circuit (PHCC) was designed to obtain an effective and efficient means of spacecraft thermal control. The hybrid circuit provides use of control instrumentation as temperature data, available to the spacecraft central data system, reprogramming capability of the local microprocessor during the spacecraft's mission, and the elimination of significant spacecraft wiring. The hybrid integrated circuit has a temperature sensing and conditioning circuit, a microprocessor, and a heater power and control circuit. The device is miniature and housed in a volume which allows physical integration with the component to be controlled. Applications might include alternate battery-powered logic-circuit configurations. A prototype unit with appropriate physical and functional interfaces was procured for testing. The physical functionality and the feasibility of fabrication of the hybrid integrated circuit were successfully verified. The remaining work to develop a flight-qualified device includes fabrication and testing of a Mil-certified part. An option for completing the PHCC flight qualification testing is to enter into a joint venture with industry.

Perspectives and concerns of clients at primary health care facilities involved in evaluation of a national mental health training programme for primary care in Kenya

PubMed Central

2013-01-01

Background A cluster randomised controlled trial (RCT) of a national Kenyan mental health primary care training programme demonstrated a significant impact on the health, disability and quality of life of clients, despite a severe shortage of medicines in the clinics (Jenkins et al. Submitted 2012). As focus group methodology has been found to be a useful method of obtaining a detailed understanding of client and health worker perspectives within health systems (Sharfritz and Roberts. Health Transit Rev 4:81–85, 1994), the experiences of the participating clients were explored through qualitative focus group discussions in order to better understand the potential reasons for the improved outcomes in the intervention group. Methods Two ninety minute focus groups were conducted in Nyanza province, a poor agricultural region of Kenya, with 10 clients from the intervention group clinics where staff had received the training programme, and 10 clients from the control group where staff had not received the training during the earlier randomised controlled trial. Results These focus group discussions suggest that the clients in the intervention group noticed and appreciated enhanced communication, diagnostic and counselling skills in their respective health workers, whereas clients in the control group were aware of the lack of these skills. Confidentiality emerged from the discussions as a significant client concern in relation to the volunteer cadre of community health workers, whose only training comes from their respective primary care health workers. Conclusion Enhanced health worker skills conferred by the mental health training programme may be responsible for the significant improvement in outcomes for clients in the intervention clinics found in the randomised controlled trial, despite the general shortage of medicines and other health system weaknesses. These findings suggest that strengthening mental health training for primary care staff is worthwhile even where health systems are not strong and where the medicine supply cannot be guaranteed. Trial registration ISRCTN 53515024. PMID:23343127

A characteristic length scale causes anomalous size effects and boundary programmability in mechanical metamaterials

NASA Astrophysics Data System (ADS)

Coulais, Corentin; Kettenis, Chris; van Hecke, Martin

2018-01-01

The architecture of mechanical metamaterials is designed to harness geometry, nonlinearity and topology to obtain advanced functionalities such as shape morphing, programmability and one-way propagation. Although a purely geometric framework successfully captures the physics of small systems under idealized conditions, large systems or heterogeneous driving conditions remain essentially unexplored. Here we uncover strong anomalies in the mechanics of a broad class of metamaterials, such as auxetics, shape changers or topological insulators; a non-monotonic variation of their stiffness with system size, and the ability of textured boundaries to completely alter their properties. These striking features stem from the competition between rotation-based deformations--relevant for small systems--and ordinary elasticity, and are controlled by a characteristic length scale which is entirely tunable by the architectural details. Our study provides new vistas for designing, controlling and programming the mechanics of metamaterials.

Research on NC motion controller based on SOPC technology

NASA Astrophysics Data System (ADS)

Jiang, Tingbiao; Meng, Biao

2006-11-01

With the rapid development of the digitization and informationization, the application of numerical control technology in the manufacturing industry becomes more and more important. However, the conventional numerical control system usually has some shortcomings such as the poor in system openness, character of real-time, cutability and reconfiguration. In order to solve these problems, this paper investigates the development prospect and advantage of the application in numerical control area with system-on-a-Programmable-Chip (SOPC) technology, and puts forward to a research program approach to the NC controller based on SOPC technology. Utilizing the characteristic of SOPC technology, we integrate high density logic device FPGA, memory SRAM, and embedded processor ARM into a single programmable logic device. We also combine the 32-bit RISC processor with high computing capability of the complicated algorithm with the FPGA device with strong motivable reconfiguration logic control ability. With these steps, we can greatly resolve the defect described in above existing numerical control systems. For the concrete implementation method, we use FPGA chip embedded with ARM hard nuclear processor to construct the control core of the motion controller. We also design the peripheral circuit of the controller according to the requirements of actual control functions, transplant real-time operating system into ARM, design the driver of the peripheral assisted chip, develop the application program to control and configuration of FPGA, design IP core of logic algorithm for various NC motion control to configured it into FPGA. The whole control system uses the concept of modular and structured design to develop hardware and software system. Thus the NC motion controller with the advantage of easily tailoring, highly opening, reconfigurable, and expandable can be implemented.

V&V Plan for FPGA-based ESF-CCS Using System Engineering Approach.

NASA Astrophysics Data System (ADS)

Maerani, Restu; Mayaka, Joyce; El Akrat, Mohamed; Cheon, Jung Jae

2018-02-01

Instrumentation and Control (I&C) systems play an important role in maintaining the safety of Nuclear Power Plant (NPP) operation. However, most current I&C safety systems are based on Programmable Logic Controller (PLC) hardware, which is difficult to verify and validate, and is susceptible to software common cause failure. Therefore, a plan for the replacement of the PLC-based safety systems, such as the Engineered Safety Feature - Component Control System (ESF-CCS), with Field Programmable Gate Arrays (FPGA) is needed. By using a systems engineering approach, which ensures traceability in every phase of the life cycle, from system requirements, design implementation to verification and validation, the system development is guaranteed to be in line with the regulatory requirements. The Verification process will ensure that the customer and stakeholder’s needs are satisfied in a high quality, trustworthy, cost efficient and schedule compliant manner throughout a system’s entire life cycle. The benefit of the V&V plan is to ensure that the FPGA based ESF-CCS is correctly built, and to ensure that the measurement of performance indicators has positive feedback that “do we do the right thing” during the re-engineering process of the FPGA based ESF-CCS.

A programmable broadband low frequency active vibration isolation system for atom interferometry.

PubMed

Tang, Biao; Zhou, Lin; Xiong, Zongyuan; Wang, Jin; Zhan, Mingsheng

2014-09-01

Vibration isolation at low frequency is important for some precision measurement experiments that use atom interferometry. To decrease the vibrational noise caused by the reflecting mirror of Raman beams in atom interferometry, we designed and demonstrated a compact stable active low frequency vibration isolation system. In this system, a digital control subsystem is used to process and feedback the vibration measured by a seismometer. A voice coil actuator is used to control and cancel the motion of a commercial passive vibration isolation platform. With the help of field programmable gate array-based control subsystem, the vibration isolation system performed flexibly and accurately. When the feedback is on, the intrinsic resonance frequency of the system will change from 0.8 Hz to about 0.015 Hz. The vertical vibration (0.01-10 Hz) measured by the in-loop seismometer is reduced by an additional factor of up to 500 on the basis of a passive vibration isolation platform, and we have proved the performance by adding an additional seismometer as well as applying it in the atom interferometry experiment.

Survey of surveillance systems and select prevention activities for hepatitis B and C, European Union/European Economic Area, 2009.

PubMed

Duffell, E F; van de Laar, M J

2015-04-02

Hepatitis B and C viral infections are leading causes of hepatic cirrhosis and cancer. The incidence and prevalence of both hepatitis B and C varies across European countries. European wide surveillance data help to understand the dynamic epidemiology of hepatitis B and C, which is important for the implementation and effectiveness of prevention and control activities.Comparison of surveillance data between countries in Europe is hampered by the differences in national healthcare and reporting systems. This report presents the results of a survey in 2009 which was undertaken to collect baseline information on surveillance systems and core prevention programmes for hepatitis B and C in individual European Union/ European Economic Area countries. The results provide key information to aid the interpretation of surveillance data, and while indicating heterogeneity in national surveillance systems and programmes, they highlight the potential of these systems. This resource has supported the implementation of a standardised European enhanced surveillance programme.

Research support for effective state and community tobacco control programme response to electronic nicotine delivery systems

PubMed Central

Schmitt, Carol L; Lee, Youn Ok; Curry, Laurel E; Farrelly, Matthew C; Rogers, Todd

2014-01-01

Objective To identify unmet research needs of state and community tobacco control practitioners pertaining to electronic nicotine delivery systems (ENDS or e-cigarettes) that would inform policy and practice efforts at the state and community levels, and to describe ENDS-related research and dissemination activities of the National Cancer Institute-funded State and Community Tobacco Control Research Initiative. Methods To determine specific research gaps relevant to state and community tobacco control practice, we analysed survey data collected from tobacco control programmes (TCPs) in all 50 US states and the District of Columbia (N=51). Survey items covered a range of ENDS issues: direct harm to users, harm of secondhand vapour, cessation, flavours, constituents and youth access. Results There is no ENDS topic on which a majority of state TCP managers feel very informed. They feel least informed about harms of secondhand vapour while also reporting that this information is among the most important for their programme. A majority (N=31) of respondents indicated needs for research on the implications of ENDS products for existing policies. Conclusions TCP managers report that ENDS research is highly important for practice and need research-based information to inform decision making around the inclusion of ENDS in existing tobacco control policies. For optimal relevance to state and community TCPs, research on ENDS should prioritise study of the health effects of ENDS use and secondhand exposure to ENDS vapour in the context of existing tobacco control policies. PMID:24935899

Use of a micro programmable logic controller for oxygen monitoring and control in multiple tanks of a recirculating aquaculture system

USDA-ARS?s Scientific Manuscript database

In intensive recirculating aquaculture systems the use of supplemental oxygen, specifically pure liquid oxygen, increases the mass of fish that can be supported and eliminates oxygen as a major limiting factor to a system’s carrying capacity. The use of pure oxygen in a recirculating aquaculture sys...

Justification for, and design of, an economical programmable multiple flight simulator

NASA Technical Reports Server (NTRS)

Kreifeldt, J. G.; Wittenber, J.; Macdonald, G.

1981-01-01

The considered research interests in air traffic control (ATC) studies revolve about the concept of distributed ATC management based on the assumption that the pilot has a cockpit display of traffic and navigation information (CDTI) via CRT graphics. The basic premise is that a CDTI equipped pilot can, in coordination with a controller, manage a part of his local traffic situation thereby improving important aspects of ATC performance. A modularly designed programmable flight simulator system is prototyped as a means of providing an economical facility of up to eight simulators to interface with a mainframe/graphics system for ATC experimentation, particularly CDTI-distributed management in which pilot-pilot interaction can have a determining effect on system performance. Need for a multiman simulator facility is predicted on results from an earlier three simulator facility.

Smart house-based optimal operation of thermal unit commitment for a smart grid considering transmission constraints

NASA Astrophysics Data System (ADS)

Howlader, Harun Or Rashid; Matayoshi, Hidehito; Noorzad, Ahmad Samim; Muarapaz, Cirio Celestino; Senjyu, Tomonobu

2018-05-01

This paper presents a smart house-based power system for thermal unit commitment programme. The proposed power system consists of smart houses, renewable energy plants and conventional thermal units. The transmission constraints are considered for the proposed system. The generated power of the large capacity renewable energy plant leads to the violated transmission constraints in the thermal unit commitment programme, therefore, the transmission constraint should be considered. This paper focuses on the optimal operation of the thermal units incorporated with controllable loads such as Electrical Vehicle and Heat Pump water heater of the smart houses. The proposed method is compared with the power flow in thermal units operation without controllable loads and the optimal operation without the transmission constraints. Simulation results show the validation of the proposed method.

A strong TB programme embedded in a developing primary healthcare system is a lose-lose situation: insights from patient and community perspectives in Cambodia.

PubMed

Sundaram, Neisha; James, Richard; Sreynimol, Um; Linda, Pen; Yoong, Joanne; Saly, Saint; Koeut, Pichenda; Eang, Mao Tan; Coker, Richard; Khan, Mishal S

2017-10-01

As exemplified by the situation in Cambodia, disease specific (vertical) health programmes are often favoured when the health system is fragile. The potential of such an approach to impede strengthening of primary healthcare services has been studied from a health systems perspective in terms of access and quality of care. In this bottom-up, qualitative study we investigate patient and community member experiences of health services when a strong tuberculosis (TB) programme is embedded into a relatively underutilized primary healthcare system. We conducted six gender-stratified community focus group discussions (n = 49) and seven mixed-gender focus group discussions with TB patients (n = 45) in three provinces located in urban, peri-urban and rural areas of Cambodia. Our analysis of health-seeking behaviour and experiences for TB and TB-like illness indicates that building a strong vertical TB control programme has had numerous benefits, including awareness of typical symptoms and need to seek care early; confidence in free TB services at public facilities; and willingness to complete treatment. However, there was a clear dichotomy in experiences and behaviour with respect to care-seeking for less severe illness at primary health services, which were generally avoided owing to access barriers and perceived poor quality. The tendency to delay seeking health care until the development of severe symptoms clearly indicative of TB is a major barrier to early diagnosis and treatment of TB. Our study indicates that an imbalance in the strength of vertical and primary health services could be a lose-lose situation as this impedes improvements in health system functioning and constrains progress of vertical disease control programmes. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Mechatronic System Design Course for Undergraduate Programmes

ERIC Educational Resources Information Center

Saleem, A.; Tutunji, T.; Al-Sharif, L.

2011-01-01

Technology advancement and human needs have led to integration among many engineering disciplines. Mechatronics engineering is an integrated discipline that focuses on the design and analysis of complete engineering systems. These systems include mechanical, electrical, computer and control subsystems. In this paper, the importance of teaching…

Significance of losses in water distribution systems in India

PubMed Central

Raman, V.

1983-01-01

Effective management of water supply systems consists in supplying adequate quantities of clean water to the population. Detailed pilot studies of water distribution systems were carried out in 9 cities in India during 1971-81 to establish the feasibility of a programme of assessment, detection, and control of water losses from supply systems. A cost-benefit analysis was carried out. Water losses from mains and service pipes in the areas studied amounted to 20-35% of the total flow in the system. At a conservative estimate, the national loss of processed water through leaks in the water distribution systems amounts to 1012 litres per year, which is equivalent to 500 million rupees. It is possible to bring down the water losses in the pipe mains to 3-5% of the total flow, and the cost incurred on the control programme can be recovered in 6-18 months. Appropriate conservation measures will help in achieving the goals of the International Water Supply and Sanitation Decade to provide clean water for all. PMID:6418401

Isothermal thermogravimetric data acquisition analysis system

NASA Technical Reports Server (NTRS)

Cooper, Kenneth, Jr.

1991-01-01

The description of an Isothermal Thermogravimetric Analysis (TGA) Data Acquisition System is presented. The system consists of software and hardware to perform a wide variety of TGA experiments. The software is written in ANSI C using Borland's Turbo C++. The hardware consists of a 486/25 MHz machine with a Capital Equipment Corp. IEEE488 interface card. The interface is to a Hewlett Packard 3497A data acquisition system using two analog input cards and a digital actuator card. The system provides for 16 TGA rigs with weight and temperature measurements from each rig. Data collection is conducted in three phases. Acquisition is done at a rapid rate during initial startup, at a slower rate during extended data collection periods, and finally at a fast rate during shutdown. Parameters controlling the rate and duration of each phase are user programmable. Furnace control (raising and lowering) is also programmable. Provision is made for automatic restart in the event of power failure or other abnormal terminations. Initial trial runs were conducted to show system stability.

Significance of losses in water distribution systems in India.

PubMed

Raman, V

1983-01-01

Effective management of water supply systems consists in supplying adequate quantities of clean water to the population. Detailed pilot studies of water distribution systems were carried out in 9 cities in India during 1971-81 to establish the feasibility of a programme of assessment, detection, and control of water losses from supply systems. A cost-benefit analysis was carried out. Water losses from mains and service pipes in the areas studied amounted to 20-35% of the total flow in the system. At a conservative estimate, the national loss of processed water through leaks in the water distribution systems amounts to 10(12) litres per year, which is equivalent to 500 million rupees.It is possible to bring down the water losses in the pipe mains to 3-5% of the total flow, and the cost incurred on the control programme can be recovered in 6-18 months. Appropriate conservation measures will help in achieving the goals of the International Water Supply and Sanitation Decade to provide clean water for all.

Does Public Sector Control Reduce Variance in School Quality?

ERIC Educational Resources Information Center

Pritchett, Lant; Viarengo, Martina

2015-01-01

Does the government control of school systems facilitate equality in school quality? Whether centralized or localized control produces more equality depends not only on what "could" happen in principle, but also on what does happen in practice. We use the Programme for International Student Assessment (PISA) database to examine the…

Disruptive technology for vector control: the Innovative Vector Control Consortium and the US Military join forces to explore transformative insecticide application technology for mosquito control programmes.

PubMed

Knapp, Jennifer; Macdonald, Michael; Malone, David; Hamon, Nicholas; Richardson, Jason H

2015-09-26

Malaria vector control technology has remained largely static for decades and there is a pressing need for innovative control tools and methodology to radically improve the quality and efficiency of current vector control practices. This report summarizes a workshop jointly organized by the Innovative Vector Control Consortium (IVCC) and the Armed Forces Pest Management Board (AFPMB) focused on public health pesticide application technology. Three main topics were discussed: the limitations with current tools and techniques used for indoor residual spraying (IRS), technology innovation to improve efficacy of IRS programmes, and truly disruptive application technology beyond IRS. The group identified several opportunities to improve application technology to include: insuring all IRS programmes are using constant flow valves and erosion resistant tips; introducing compression sprayer improvements that help minimize pesticide waste and human error; and moving beyond IRS by embracing the potential for new larval source management techniques and next generation technology such as unmanned "smart" spray systems. The meeting served to lay the foundation for broader collaboration between the IVCC and AFPMB and partners in industry, the World Health Organization, the Bill and Melinda Gates Foundation and others.

PROGRAMMABLE DISPLAY PUSHBUTTON LEGEND EDITOR

NASA Technical Reports Server (NTRS)

Busquets, A. M.

1994-01-01

The Programmable Display Pushbutton (PDP) is a pushbutton device available from Micro Switch which has a programmable 16 x 35 matrix of LEDs on the pushbutton surface. Any desired legends can be displayed on the PDPs, producing user-friendly applications which greatly reduce the need for dedicated manual controls. Because the PDP can interact with the operator, it can call for the correct response before transmitting its next message. It is both a simple manual control and a sophisticated programmable link between the operator and the host system. The Programmable Display Pushbutton Legend Editor, PDPE, is used to create the LED displays for the pushbuttons. PDPE encodes PDP control commands and legend data into message byte strings sent to a Logic Refresh and Control Unit (LRCU). The LRCU serves as the driver for a set of four PDPs. The legend editor (PDPE) transmits to the LRCU user specified commands that control what is displayed on the LED face of the individual pushbuttons. Upon receiving a command, the LRCU transmits an acknowledgement that the message was received and executed successfully. The user then observes the effect of the command on the PDP displays and decides whether or not to send the byte code of the message to a data file so that it may be called by an applications program. The PDPE program is written in FORTRAN for interactive execution. It was developed on a DEC VAX 11/780 under VMS. It has a central memory requirement of approximately 12800 bytes. It requires four Micro Switch PDPs and two RS-232 VAX 11/780 terminal ports. The PDPE program was developed in 1985.

Addressing poverty through disease control programmes: examples from Tuberculosis control in India

PubMed Central

2012-01-01

Introduction Tuberculosis remains a major public health problem in India with the country accounting for one-fifth or 21% of all tuberculosis cases reported globally. The purpose of the study was to obtain an understanding on pro-poor initiatives within the framework of tuberculosis control programme in India and to identify mechanisms to improve the uptake and access to TB services among the poor. Methodology A national level workshop was held with participation from all relevant stakeholder groups. This study conducted during the stakeholder workshop adopted participatory research methods. The data was elicited through consultative and collegiate processes. The research study also factored information from primary and secondary sources that included literature review examining poverty headcount ratios and below poverty line population in the country; and quasi-profiling assessments to identify poor, backward and tribal districts as defined by the TB programme in India. Results Results revealed that current pro-poor initiatives in TB control included collaboration with private providers and engaging community to improve access among the poor to TB diagnostic and treatment services. The participants identified gaps in existing pro-poor strategies that related to implementation of advocacy, communication and social mobilisation; decentralisation of DOT; and incentives for the poor through the available schemes for public-private partnerships and provided key recommendations for action. Synergies between TB control programme and centrally sponsored social welfare schemes and state specific social welfare programmes aimed at benefitting the poor were unclear. Conclusion Further in-depth analysis and systems/policy/operations research exploring pro-poor initiatives, in particular examining service delivery synergies between existing poverty alleviation schemes and TB control programme is essential. The understanding, reflection and knowledge of the key stakeholders during this participatory workshop provides recommendations for action, further planning and research on pro-poor TB centric interventions in the country. PMID:22449205

Embedding operational research into national disease control programme: lessons from 10 years of experience in Indonesia

PubMed Central

Mahendradhata, Yodi; Probandari, Ari; Widjanarko, Bagoes; Riono, Pandu; Mustikawati, Dyah; Tiemersma, Edine W.; Alisjahbana, Bachti

2014-01-01

There is growing recognition that operational research (OR) should be embedded into national disease control programmes. However, much of the current OR capacity building schemes are still predominantly driven by international agencies with limited integration into national disease control programmes. We demonstrated that it is possible to achieve a more sustainable capacity building effort across the country by establishing an OR group within the national tuberculosis (TB) control programme in Indonesia. Key challenges identified include long-term financial support, limited number of scientific publications, and difficulties in documenting impact on programmatic performance. External evaluation has expressed concerns in regard to utilisation of OR in policy making. Efforts to address this concern have been introduced recently and led to indications of increased utilisation of research evidence in policy making by the national TB control programme. Embedding OR in national disease control programmes is key in establishing an evidence-based disease control programme. PMID:25361728

Computer controlled fluorometer device and method of operating same

DOEpatents

Kolber, Z.; Falkowski, P.

1990-07-17

A computer controlled fluorometer device and method of operating same, said device being made to include a pump flash source and a probe flash source and one or more sample chambers in combination with a light condenser lens system and associated filters and reflectors and collimators, as well as signal conditioning and monitoring means and a programmable computer means and a software programmable source of background irradiance that is operable according to the method of the invention to rapidly, efficiently and accurately measure photosynthetic activity by precisely monitoring and recording changes in fluorescence yield produced by a controlled series of predetermined cycles of probe and pump flashes from the respective probe and pump sources that are controlled by the computer means. 13 figs.

Computer controlled fluorometer device and method of operating same

DOEpatents

Kolber, Zbigniew; Falkowski, Paul

1990-01-01

A computer controlled fluorometer device and method of operating same, said device being made to include a pump flash source and a probe flash source and one or more sample chambers in combination with a light condenser lens system and associated filters and reflectors and collimators, as well as signal conditioning and monitoring means and a programmable computer means and a software programmable source of background irradiance that is operable according to the method of the invention to rapidly, efficiently and accurately measure photosynthetic activity by precisely monitoring and recording changes in fluorescence yield produced by a controlled series of predetermined cycles of probe and pump flashes from the respective probe and pump sources that are controlled by the computer means.

Promoting interdisciplinary education - the Vienna Doctoral Programme on Water Resource Systems

NASA Astrophysics Data System (ADS)

Blöschl, G.; Carr, G.; Bucher, C.; Farnleitner, A. H.; Rechberger, H.; Wagner, W.; Zessner, M.

2011-11-01

The Vienna Doctoral Programme on Water Resource Systems (DK-WRS) is a programme that aims to educate students in interdisciplinary water science through cutting edge research at an international level. It is funded by the Austrian Science Fund and designed to run over a period of 12 yr during which 80 doctoral students are anticipated to graduate. This paper reports on our experiences of setting up and implementing the Programme. We identify three challenges: integrating the disciplines, maintaining depth in an interdisciplinary programme, and teaching subjects remote to each student's core expertise. To address these challenges we adopted a number of approaches. We use three levels of instruments to foster integration across the disciplines: joint groups (e.g. a joint study programme), joint science questions (e.g. developed in annual symposia), and joint study sites. To maintain depth we apply a system of quality control including regular feedback sessions, theses by journal publications and international study exchange. For simultaneously teaching students from civil and environmental engineering, biology, geology, chemistry, mathematics we use visually explicit teaching, learning by doing, extra mentoring and by cross relating associated subjects. Our initial assessment of the Programme shows some very positive outcomes. Joint science questions formed between students from various disciplines indicate integration is being achieved. The number of successful publications in top journals suggests that depth is maintained. Positive feedback from the students on the variety and clarity of the courses indicates the teaching strategy is working well. Our experiences have shown that implementing and running an interdisciplinary doctoral programme has its challenges and is demanding in terms of time and human resources but seeing interactions progress and watching people grow and develop their way of thinking in an interdisciplinary environment is a valuable reward.

Promoting interdisciplinary education - the Vienna Doctoral Programme on Water Resource Systems

NASA Astrophysics Data System (ADS)

Blöschl, G.; Carr, G.; Bucher, C.; Farnleitner, A. H.; Rechberger, H.; Wagner, W.; Zessner, M.

2012-02-01

The Vienna Doctoral Programme on Water Resource Systems (DK-WRS) is a programme that aims to educate students in interdisciplinary water science through cutting edge research at an international level. It is funded by the Austrian Science Fund and designed to run over a period of 12 yr during which 80 doctoral students are anticipated to graduate. This paper reports on our experiences of setting up and implementing the Programme. We identify three challenges: integrating the disciplines, maintaining depth in an interdisciplinary programme, and teaching subjects remote to each student's core expertise. To address these challenges we adopt a number of approaches. We use three levels of instruments to foster integration across the disciplines: joint groups (e.g. a joint study programme), joint science questions (e.g. developed in annual symposia), and joint study sites. To maintain depth we apply a system of quality control including regular feedback sessions, theses by journal publications and international study exchange. For simultaneously teaching students from civil and environmental engineering, biology, geology, chemistry, mathematics we use visually explicit teaching, learning by doing, extra mentoring and by cross relating associated subjects. Our initial assessment of the Programme shows some very positive outcomes. Joint science questions formed between students from various disciplines indicate integration is being achieved. The number of successful publications in top journals suggests that depth is maintained. Positive feedback from the students on the variety and clarity of the courses indicates the teaching strategy is working well. Our experiences have shown that implementing and running an interdisciplinary doctoral programme has its challenges and is demanding in terms of time and human resources but seeing interactions progress and watching people grow and develop their way of thinking in an interdisciplinary environment is a valuable reward.

Roll Angle Estimation Using Thermopiles for a Flight Controlled Mortar

DTIC Science & Technology

2012-06-01

Using Xilinx’s System generator, the entire design was implemented at a relatively high level within Malab’s Simulink. This allowed VHDL code to...thermopile data with a Recursive Least Squares (RLS) filter implemented on a field programmable gate array (FPGA). These results demonstrate the...accurately estimated by processing the thermopile data with a Recursive Least Squares (RLS) filter implemented on a field programmable gate array (FPGA

A programmable transformer coupled converter for high-power space applications

NASA Technical Reports Server (NTRS)

Kapustka, R. E.; Bush, J. R., Jr.; Graves, J. R.; Lanier, J. R., Jr.

1986-01-01

A programmable transformer coupled converter (PTCC) is being developed by NASA/Marshall Space Flight Center for application in future large space power systems. The PTCC uses an internal microprocessor to control the output characteristics of its three Cuk integrated magnetics type power stages which have a combined capability of 5.4 kW (30 V at 180 A). Details of design trade-offs and test results are presented.

Project Mercury: NASA's first manned space programme

NASA Astrophysics Data System (ADS)

Catchpole, John

Project Mercury will offer a developmental resume of the first American manned spaceflight programme and its associated infrastructure, including accounts of space launch vehicles. The book highlights the differences in Redstone/Atlas technology, drawing similar comparisons between ballistic capsules and alternative types of spacecraft. The book also covers astronaut selection and training, as well as tracking systems, flight control, basic principles of spaceflight and detailed accounts of individual flights.

Precision digital control systems

NASA Astrophysics Data System (ADS)

Vyskub, V. G.; Rozov, B. S.; Savelev, V. I.

This book is concerned with the characteristics of digital control systems of great accuracy. A classification of such systems is considered along with aspects of stabilization, programmable control applications, digital tracking systems and servomechanisms, and precision systems for the control of a scanning laser beam. Other topics explored are related to systems of proportional control, linear devices and methods for increasing precision, approaches for further decreasing the response time in the case of high-speed operation, possibilities for the implementation of a logical control law, and methods for the study of precision digital control systems. A description is presented of precision automatic control systems which make use of electronic computers, taking into account the existing possibilities for an employment of computers in automatic control systems, approaches and studies required for including a computer in such control systems, and an analysis of the structure of automatic control systems with computers. Attention is also given to functional blocks in the considered systems.

Improving excellence in scoliosis rehabilitation: a controlled study of matched pairs.

PubMed

Weiss, H-R; Klein, R

2006-01-01

Physiotherapy programmes so far mainly address the lateral deformity of scoliosis, a few aim at the correction of rotation and only very few address the sagittal profile. Meanwhile, there is evidence that correction forces applied in the sagittal plane are also able to correct the scoliotic deformity in the coronal and frontal planes. So it should be possible to improve excellence in scoliosis rehabilitation by the implementation of exercises to correct the sagittal deformity in scoliosis patients. An exercise programme (physio-logic exercises) aiming at a physiologic sagittal profile was developed to add to the programme applied at the centre or to replace certain exercises or exercising positions. To test the hypothesis that physio-logic exercises improve the outcome of Scoliosis Intensive Rehabilitation (SIR), the following study design was chosen: Prospective controlled trial of pairs of patients with idiopathic scoliosis matched by sex, age, Cobb angle and curve pattern. There were 18 patients in the treatment group (SIR + physio-logic exercises) and 18 patients in the control group (SIR only), all in matched pairs. Average Cobb angle in the treatment group was 34.5 degrees (SD 7.8) Cobb angle in the control group was 31.6 degrees (SD 5.8). Age in the treatment group was at average 15.3 years (SD 1.1) and in the control group 14.7 years (SD 1.3). Thirteen of the 18 patients in either group had a brace. Outcome parameter: average lateral deviation (mm), average surface rotation ( degrees ) and maximum Kyphosis angle ( degrees ) as evaluated with the help of surface topography (Formetric-system). Lateral deviation (mm) decreased significantly after the performance of the physio-logic programme and highly significantly in the physio-logic ADL posture; however, it was not significant after completion of the whole rehabilitation programme (2.3 vs 0.3 mm in the controls). Surface rotation improved at average 1.2 degrees in the treatment group and 0.8 degrees in the controls while Kyphosis angle did not improve in both groups. The physio-logic programme has to be regarded as a useful 'add on' to Scoliosis Rehabilitation with regards to the lateral deviation of the scoliotic trunk. A longitudinal controlled study is necessary to evaluate the long-term effect of the the physio-logic programme also with the help of X-rays.

Maskless, reticle-free, lithography

DOEpatents

Ceglio, N.M.; Markle, D.A.

1997-11-25

A lithography system in which the mask or reticle, which usually carries the pattern to be printed onto a substrate, is replaced by a programmable array of binary (i.e. on/off) light valves or switches which can be programmed to replicate a portion of the pattern each time an illuminating light source is flashed. The pattern of light produced by the programmable array is imaged onto a lithographic substrate which is mounted on a scanning stage as is common in optical lithography. The stage motion and the pattern of light displayed by the programmable array are precisely synchronized with the flashing illumination system so that each flash accurately positions the image of the pattern on the substrate. This is achieved by advancing the pattern held in the programmable array by an amount which corresponds to the travel of the substrate stage each time the light source flashes. In this manner the image is built up of multiple flashes and an isolated defect in the array will only have a small effect on the printed pattern. The method includes projection lithographies using radiation other than optical or ultraviolet light. The programmable array of binary switches would be used to control extreme ultraviolet (EUV), x-ray, or electron, illumination systems, obviating the need for stable, defect free masks for projection EUV, x-ray, or electron, lithographies. 7 figs.

Maskless, reticle-free, lithography

DOEpatents

Ceglio, Natale M.; Markle, David A.

1997-11-25

A lithography system in which the mask or reticle, which usually carries the pattern to be printed onto a substrate, is replaced by a programmable array of binary (i.e. on/off) light valves or switches which can be programmed to replicate a portion of the pattern each time an illuminating light source is flashed. The pattern of light produced by the programmable array is imaged onto a lithographic substrate which is mounted on a scanning stage as is common in optical lithography. The stage motion and the pattern of light displayed by the programmable array are precisely synchronized with the flashing illumination system so that each flash accurately positions the image of the pattern on the substrate. This is achieved by advancing the pattern held in the programmable array by an amount which corresponds to the travel of the substrate stage each time the light source flashes. In this manner the image is built up of multiple flashes and an isolated defect in the array will only have a small effect on the printed pattern. The method includes projection lithographies using radiation other than optical or ultraviolet light. The programmable array of binary switches would be used to control extreme ultraviolet (EUV), x-ray, or electron, illumination systems, obviating the need for stable, defect free masks for projection EUV, x-ray, or electron, lithographies.

Distributed solid state programmable thermostat/power controller

NASA Technical Reports Server (NTRS)

Smith, Dennis A. (Inventor); Alexander, Jane C. (Inventor); Howard, David E. (Inventor)

2008-01-01

A self-contained power controller having a power driver switch, programmable controller, communication port, and environmental parameter measuring device coupled to a controllable device. The self-contained power controller needs only a single voltage source to power discrete devices, analog devices, and the controlled device. The programmable controller has a run mode which, when selected, upon the occurrence of a trigger event changes the state of a power driver switch and wherein the power driver switch is maintained by the programmable controller at the same state until the occurrence of a second event.

Electromechanical Componentry. High-Technology Training Module.

ERIC Educational Resources Information Center

Lindemann, Don

This training module on electromechanical components contains 10 units for a two-year vocational program packaging system equipment control course at Wisconsin Indianhead Technical College. This module describes the functions of electromechanical devices essential for understanding input/output devices for Programmable Logic Control (PLC)…

Advanced Map For Real-Time Process Control

NASA Astrophysics Data System (ADS)

Shiobara, Yasuhisa; Matsudaira, Takayuki; Sashida, Yoshio; Chikuma, Makoto

1987-10-01

MAP, a communications protocol for factory automation proposed by General Motors [1], has been accepted by users throughout the world and is rapidly becoming a user standard. In fact, it is now a LAN standard for factory automation. MAP is intended to interconnect different devices, such as computers and programmable devices, made by different manufacturers, enabling them to exchange information. It is based on the OSI intercomputer com-munications protocol standard under development by the ISO. With progress and standardization, MAP is being investigated for application to process control fields other than factory automation [2]. The transmission response time of the network system and centralized management of data exchanged with various devices for distributed control are import-ant in the case of a real-time process control with programmable controllers, computers, and instruments connected to a LAN system. MAP/EPA and MINI MAP aim at reduced overhead in protocol processing and enhanced transmission response. If applied to real-time process control, a protocol based on point-to-point and request-response transactions limits throughput and transmission response. This paper describes an advanced MAP LAN system applied to real-time process control by adding a new data transmission control that performs multicasting communication voluntarily and periodically in the priority order of data to be exchanged.

PROGRAMMABLE TURBIDISTAT FOR SUSPENDED PARTICLES IN LABORATORY AQUARIA

EPA Science Inventory

A system for precise control of suspended particle concentrations in laboratory aquaria is described. It comprises an air-lift dosing system, a transmissometer to measure particle concentration, and a microcomputer which calculates the dose required to achieve a programmed turbid...

Concepts in research capabilities strengthening positive experiences of network approaches by TDR in the People's Republic of China and Eastern Asia.

PubMed

Zhou, Xiao-Nong; Wayling, Steven; Bergquist, Robert

2010-01-01

Strengthening human and physical resources for health research is an important function of any sustainable public health approach. The process of successfully embedding research into health systems in developing countries calls for the participation of competent, national scientists, with input and support where appropriate from international research institutions. Without a research-friendly environment, it is not easy for institutions and control programmes to engage and deliver products that can contribute to improving general health status. For example, monitoring is an important component of disease control but this can now be built upon to design surveillance systems capable of reporting activities in real time based on geographical information systems and continuous internet access. Informed surveillance can take on a stronger role than just capturing transmission foci to also become instrumental in directing swift responses in a spatially explicit and cost-effective manner. Further, whenever assessments of impact and control measures for different diseases are similar as they are, for example, with respect to schistosomiasis and food-borne trematode infections, the amalgamation of separate control programmes becomes realistic even if diverse strategies were originally developed for the diseases in question. Developments like this are guiding the expansion of research capabilities to espouse the integration of multidisciplinary research into national disease control programmes. The deployment of public-private partnerships as vehicles for operational progress and the endorsement of regional networks as platforms for driving research, while at the same time supporting and promoting training and dispersion of new knowledge, represent further manifestations of innovation in disease control. Some Asian examples of how this can be accomplished are provided. Copyright 2010 Elsevier Ltd. All rights reserved.

Value for money: economic evaluation of two different caries prevention programmes compared with standard care in a randomized controlled trial.

PubMed

Vermaire, J H; van Loveren, C; Brouwer, W B F; Krol, M

2014-01-01

A cost-effectiveness analysis was conducted during a 3-year randomized controlled clinical trial in a general dental practice in the Netherlands in which 230 6-year-old children (± 3 months) were assigned to either regular dental care, an increased professional fluoride application (IPFA) programme or a non-operative caries treatment and prevention (NOCTP) programme. Information on resource use during the 3-year period was documented by the dental nurse at every patient visit, such as treatment time, travel time and travel distance. Caries increment scores (at D3MFS level) were used to assess effectiveness. Cost calculations were performed using bottom-up micro-costing. Incremental cost-effectiveness ratios (ICERs) were expressed as additional average costs per prevented DMFS. The ICERs compared with regular dental care from a health care system perspective and societal perspective were, respectively, EUR 269 and EUR 1,369 per prevented DMFS in the IPFA programme, and EUR 30 and EUR 100 in the NOCTP programme. The largest investments for the NOCTP group were made in the first year of the study; they decreased in the second and equalled the costs of control group in third year of the study. From both medical and economic points of view, the NOCTP strategy may be considered the preferred strategy for caries prevention.

Demographic and socioeconomic factors associated with disparity in wheelchair customizability among people with traumatic spinal cord injury.

PubMed

Hunt, Peter Cody; Boninger, Michael L; Cooper, Rory A; Zafonte, Ross D; Fitzgerald, Shirley G; Schmeler, Mark R

2004-11-01

To determine if a standard of care for wheelchair provision exists within the participating centers and if there is disparity in wheelchair customizability among the study sample. Convenience sample survey. Thirteen Model Spinal Cord Injury Systems that provide comprehensive rehabilitation for people with traumatic spinal cord injury (SCI) and that are part of the national database funded through the US Department of Education. A total of 412 people with SCI who use wheelchairs over 40 hours a week. Survey information was obtained from subjects via telephone and in-person interviews and from the national database. Collected information included age, race, education, level of injury, and wheelchair funding source. Number and type (manual or power) of wheelchairs. Wheelchair customizability as defined by design features (eg, adjustable axle position, programmable controls). Ninety-seven percent of manual wheelchair users and 54% of power wheelchair users had customizable wheelchairs. No power wheelchair user received a wheelchair without programmable controls. Minorities with low socioeconomic backgrounds (low income, Medicaid/Medicare recipients, less educated) were more likely to have standard manual and standard programmable power wheelchairs. Older subjects were also more likely to have standard programmable power wheelchairs. The standard of care for manual wheelchair users with SCI is a lightweight and customizable wheelchair. The standard of care for power wheelchairs users has programmable controls. Unfortunately, socioeconomically disadvantaged people were less likely to receive customizable wheelchairs.

Programmable logic controller implementation of an auto-tuned predictive control based on minimal plant information.

PubMed

Valencia-Palomo, G; Rossiter, J A

2011-01-01

This paper makes two key contributions. First, it tackles the issue of the availability of constrained predictive control for low-level control loops. Hence, it describes how the constrained control algorithm is embedded in an industrial programmable logic controller (PLC) using the IEC 61131-3 programming standard. Second, there is a definition and implementation of a novel auto-tuned predictive controller; the key novelty is that the modelling is based on relatively crude but pragmatic plant information. Laboratory experiment tests were carried out in two bench-scale laboratory systems to prove the effectiveness of the combined algorithm and hardware solution. For completeness, the results are compared with a commercial proportional-integral-derivative (PID) controller (also embedded in the PLC) using the most up to date auto-tuning rules. Copyright © 2010 ISA. Published by Elsevier Ltd. All rights reserved.

A programmable palm-size gas analyzer for use in micro-autonomous systems

NASA Astrophysics Data System (ADS)

Gordenker, Robert J. M.; Wise, Kensall D.

2012-06-01

Gas analysis systems having small size, low power, and high selectivity are badly needed for defense (detection of explosives and chemical warfare agents), homeland security, health care, and environmental applications. This paper presents a palm-size gas chromatography system having analysis times of 5-50sec, detection limits less than 1ppb, and an average power dissipation less than one watt. It uses no consumables. The three-chip fluidic system consists of a preconcentrator, a 25cm-3m separation column, and a chemi-resistive detector and is supported by a microcomputer and circuitry for programmable temperature control. The entire system, including the mini-pump and battery, occupies less than 200cc and is configured for use on autonomous robotic vehicles.

[CRISPR/Cas system for genome editing in pluripotent stem cells].

PubMed

Vasil'eva, E A; Melino, D; Barlev, N A

2015-01-01

Genome editing systems based on site-specific nucleases became very popular for genome editing in modern bioengineering. Human pluripotent stem cells provide a unique platform for genes function study, disease modeling, and drugs testing. Consequently, technology for fast, accurate and well controlled genome manipulation is required. CRISPR/Cas (clustered regularly interspaced short palindromic repeat/CRISPR-associated) system could be employed for these purposes. This system is based on site-specific programmable nuclease Cas9. Numerous advantages of the CRISPR/Cas system and its successful application to human stem cells provide wide opportunities for genome therapy and regeneration medicine. In this publication, we describe and compare the main genome editing systems based on site-specific programmable nucleases and discuss opportunities and perspectives of the CRISPR/Cas system for application to pluripotent stem cells.

Logistics engineering education from the point of view environment

NASA Astrophysics Data System (ADS)

Bányai, Ágota

2010-05-01

A new field of MSc programme offered by the Faculty of Mechanical Engineering and Informatics of the University of Miskolc is represented by the programme in logistics engineering. The Faculty has always laid great emphasis on assigning processes connected with environment protection and globalisation issues the appropriate weight in its programmes. This is based on the fact that the Faculty has initiated and been involved in a great number of research and development projects with a substantial emphasis on the fundamental principles of sustainable development. The objective of the programme of logistics engineering is to train engineers who, in possession of the science, engineering, economic, informatics and industrial, transportation technological knowledge related to the professional field of logistics, are able to analyse, design, organise, and control logistics processes and systems (freight transportation, materials handling, storage, commissioning, loading, purchasing, distribution and waste management) as well as to design and develop machinery and equipment as the elements of logistic systems and also to be involved in their manufacture and quality control and are able to control their operation. The programme prepares its students for performing the logistics management tasks in a company, for creative participation in solving research and development problems in logistics and for pursuing logistics studies in doctoral programmes. There are several laboratories available for practice-oriented training. The 'Integrated Logistics Laboratory' consists of various fixed and mobile, real industrial, i.e. not model-level equipment, the integration of which in one system facilitates not only the presentation, examination and development of the individual self-standing facilities, but the study of their interaction as well in terms of mechatronics, engineering, control engineering, informatics, identification technology and logistics. The state-of-the-art, reliable, automated mechatronics-material flow system with its single control engineering system provides the academic staff with up-to-date research facilities, and enables the students to study sophisticated equipment and systems that could also operate under industrial conditions, thus offering knowledge that can be efficiently utilised in the industry after graduation. The laboratory measurements of the programme in logistics engineering are performed in this laboratory, and they are supplemented by the theoretical and practical measurements in the ‘Robotic Technology Assembly Laboratory', the ‘Power Electronics Laboratory', the ‘Mechatronics Laboratory', the ‘CAD/CAM Laboratory' and the ‘Acoustics and Product Laboratory'. The bodies of knowledge connected with environment protection and sustainable development can be grouped around three large topic areas. In environmental economics the objective is to present the corporate-organisational aspects of environmental management. Putting environmental management in the focal point, the objective of the programme is to impart knowledge that can be utilised in practice which can be used to shift the relation between the organisation and its environment in the direction of sustainability. The tools include environmental controlling, environmental marketing and various solutions of environmental performance evaluation. The second large topic area is globalization and its logistic aspects. In the field of global logistics the following knowledge carries special weight: logistic challenges in a globalised world; the concept of global logistics, its conditions and effects; delayed manufacture, assembly, packaging; the economic investigation of delayed assembly; globalised purchase and distribution in logistics; the logistic features of the globalised production supply/distribution chain; meta-logistics systems; logistics-related EU harmonisation issues; the effect of e-commerce on the global logistic system; logistic centres, connecting virtual logistic companies in a network; the environmental harmonisation of international transportation. The third large area is recycling logistics. Here the bodies of knowledge are as follows: the concept of developing a ‘closed-loop economy'; stages in the progress of products after discarding, connections between the uses of waste collection, processing, selection, deposition or reuse processes; features of European recommendations (e.g. EMAS), harmonisation of national practices and global solutions; presenting the logistics part-processes of recycling; presenting process organisation procedures for the foundation of designing one-route, multi-route, replacement container waste collecting and distributing part systems; recycling strategies with consideration of logistically serving the separation and storage of waste to be deposited, the technological processing systems of recyclable materials; presenting dismantling and product and material identification technologies, presenting logistics part-tasks, analysis of technical solutions; IT solutions for identifying products and their elements to be distributed and withdrawn from distribution after use (e.g. RFID systems) and monitoring their material flow; methodology of using efficiency analyses and incentive systems in the decision making processes of recycling processes, risk analysis for evaluating typical part processes; the methodology of recycling-oriented product design for specific product groups. Graduates of the Master programmes are able to use and utilise the knowledge obtained in practice, use problem-solving techniques; process the information, new problems and new phenomena arising in the border areas of the professional experience gained the discipline; formulate substantial criticism and opinions as far as possible, make decisions and draw conclusions; comprehending and solving the problems arising, suggesting original ideas; plan and perform tasks independently at a high professional standard; improve themselves, develop their knowledge to higher levels; view the management of technical/engineering - economic - human resources in a complex way; design complex systems in a global way based on a system-oriented and process-oriented way of thinking; use integrated knowledge from the professional fields of transport, mobile machinery, process theory, industrial production processes, electronics and informatics; combine the part processes of logistics systems and the part units performing their physical realisation (materials handling equipment, sensors, actuators, control systems, and database systems, etc.); perform state evaluations depending on their specialisation, use them to elaborate evaluations and recommendations, develop complex logistic systems, design, organise and control them at the highest level. This work was implemented with support by the European Union and co-funding of the European Social Fund.

D0 General Support: The Use of Programmable Logic Controllers (PLCS) at D0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hance, R.; /Fermilab

With the exception of control of heating, ventilation, and air conditioning (HVAC) ventilation fans, and their shutdown in the case of smoke in the ducts, all implementations of Programmable Logic Controllers (PLCs) in Dzero have been made within the fundamental premise that no uncertified PLC apparatus shall be entrusted with the safety of equipment or personnel. Thus although PLCs are used to control and monitor all manner of intricate equipment, simple hardware interlocks and relief devices provide basic protection against component failure, control failure, or inappropriate control operation. Nevertheless, this report includes two observations as follows: (1) It may bemore » prudent to reconfigure the link between the Pyrotronics system and the HVAC system such that the Pyrotronics system provides interlocks to the ventilation fans instead of control inputs to the uncertified HVAC PLCs. Although the Pyrotronics system is certified and maintained to life safety standards, the HVAC system is not. A hardware or software failure of the HVAC system probably should not be allowed to result in the situation where the ventilation fans in a smoke filled duct continue to operate. Dan Markley is investigating this matter. (2) It may also be prudent to examine the network security of those systems connected to the Fermilab WAN (HVAC, Cryo, and Solenoid Controls). Even though the impact of a successful hack might only be to operations, it might nevertheless be disruptive and could be expensive. The risks should perhaps be analyzed. One of the most attractive features of these systems, from a user's viewpoint, is their unlimited networking. The unlimited networking that makes the systems so convenient to legitimate access also makes them vulnerable to illegitimate access.« less

Institutionalizing and sustaining social change in health systems: the case of Uganda.

PubMed

Hage, Jerald; Valadez, Joseph J

2017-11-01

The key to high impact health services is institutionalizing and sustaining programme evaluation. Uganda represents a success story in the use of a specific programme evaluation method: Lot Quality Assurance Sampling (LQAS). Institutionalization is defined by two C's: competent programme evaluators and control mechanisms that effectively use evaluation data to improve health services. Sustainability means continued training and funding for the evaluation approach. Social science literature that researches institutionalization has emphasized 'stability', whereas in global health, the issue is determining how to improve the impact of services by 'changing' programmes. In Uganda, we measured the extent of the institutionalization and sustainability of evaluating programmes that produce change in nine districts sampled to represent three largely rural regions and varying levels of effective health programmes. We used the proportion of mothers with children aged 0-11 months who delivered in a health facility as the principal indicator to measure programme effectiveness. Interviews and focus groups were conducted among directors, evaluation supervisors, data collectors in the district health offices, and informant interviews conducted individually at the central government level. Seven of the nine districts demonstrated a high level of institutionalization of evaluation. The two others had only conducted one round of programme evaluation. When we control for the availability of health facilities, we find that the degree of institutionalization is moderately related to the prevalence of the delivery of a baby in a health facility. Evaluation was institutionalized at the central government level. Sustainability existed at both levels. Several measures indicate that lessons from the nine district case studies may be relevant to the 74 districts that had at least two rounds of programme evaluation. We note that there is an association between the evaluation data being used to change health services, and the four separate indicators being used to measure women's health and child survival services. We conclude that the two C's (competent evaluators and control mechanisms) have been critical for sustaining programme evaluation in Uganda. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

Institutionalizing and sustaining social change in health systems: the case of Uganda

PubMed Central

Hage, Jerald; Valadez, Joseph J

2017-01-01

Abstract The key to high impact health services is institutionalizing and sustaining programme evaluation. Uganda represents a success story in the use of a specific programme evaluation method: Lot Quality Assurance Sampling (LQAS). Institutionalization is defined by two C’s: competent programme evaluators and control mechanisms that effectively use evaluation data to improve health services. Sustainability means continued training and funding for the evaluation approach. Social science literature that researches institutionalization has emphasized ‘stability’, whereas in global health, the issue is determining how to improve the impact of services by ‘changing’ programmes. In Uganda, we measured the extent of the institutionalization and sustainability of evaluating programmes that produce change in nine districts sampled to represent three largely rural regions and varying levels of effective health programmes. We used the proportion of mothers with children aged 0–11 months who delivered in a health facility as the principal indicator to measure programme effectiveness. Interviews and focus groups were conducted among directors, evaluation supervisors, data collectors in the district health offices, and informant interviews conducted individually at the central government level. Seven of the nine districts demonstrated a high level of institutionalization of evaluation. The two others had only conducted one round of programme evaluation. When we control for the availability of health facilities, we find that the degree of institutionalization is moderately related to the prevalence of the delivery of a baby in a health facility. Evaluation was institutionalized at the central government level. Sustainability existed at both levels. Several measures indicate that lessons from the nine district case studies may be relevant to the 74 districts that had at least two rounds of programme evaluation. We note that there is an association between the evaluation data being used to change health services, and the four separate indicators being used to measure women's health and child survival services. We conclude that the two C’s (competent evaluators and control mechanisms) have been critical for sustaining programme evaluation in Uganda. PMID:28981663

Digital micromirror device camera with per-pixel coded exposure for high dynamic range imaging.

PubMed

Feng, Wei; Zhang, Fumin; Wang, Weijing; Xing, Wei; Qu, Xinghua

2017-05-01

In this paper, we overcome the limited dynamic range of the conventional digital camera, and propose a method of realizing high dynamic range imaging (HDRI) from a novel programmable imaging system called a digital micromirror device (DMD) camera. The unique feature of the proposed new method is that the spatial and temporal information of incident light in our DMD camera can be flexibly modulated, and it enables the camera pixels always to have reasonable exposure intensity by DMD pixel-level modulation. More importantly, it allows different light intensity control algorithms used in our programmable imaging system to achieve HDRI. We implement the optical system prototype, analyze the theory of per-pixel coded exposure for HDRI, and put forward an adaptive light intensity control algorithm to effectively modulate the different light intensity to recover high dynamic range images. Via experiments, we demonstrate the effectiveness of our method and implement the HDRI on different objects.

A DNA-based molecular motor that can navigate a network of tracks

NASA Astrophysics Data System (ADS)

Wickham, Shelley F. J.; Bath, Jonathan; Katsuda, Yousuke; Endo, Masayuki; Hidaka, Kumi; Sugiyama, Hiroshi; Turberfield, Andrew J.

2012-03-01

Synthetic molecular motors can be fuelled by the hydrolysis or hybridization of DNA. Such motors can move autonomously and programmably, and long-range transport has been observed on linear tracks. It has also been shown that DNA systems can compute. Here, we report a synthetic DNA-based system that integrates long-range transport and information processing. We show that the path of a motor through a network of tracks containing four possible routes can be programmed using instructions that are added externally or carried by the motor itself. When external control is used we find that 87% of the motors follow the correct path, and when internal control is used 71% of the motors follow the correct path. Programmable motion will allow the development of computing networks, molecular systems that can sort and process cargoes according to instructions that they carry, and assembly lines that can be reconfigured dynamically in response to changing demands.

A Methodology for Evaluating the Hygroscopic Behavior of Wood in Adaptive Building Skins using Motion Grammar

NASA Astrophysics Data System (ADS)

El-Dabaa, Rana; Abdelmohsen, Sherif

2018-05-01

The challenge in designing kinetic architecture lies in the lack of applying computational design and human computer interaction to successfully design intelligent and interactive interfaces. The use of ‘programmable materials’ as specifically fabricated composite materials that afford motion upon stimulation is promising for low-cost low-tech systems for kinetic facades in buildings. Despite efforts to develop working prototypes, there has been no clear methodological framework for understanding and controlling the behavior of programmable materials or for using them for such purposes. This paper introduces a methodology for evaluating the motion acquired from programmed material – resulting from the hygroscopic behavior of wood – through ‘motion grammar’. Motion grammar typically allows for the explanation of desired motion control in a computationally tractable method. The paper analyzed and evaluated motion parameters related to the hygroscopic properties and behavior of wood, and introduce a framework for tracking and controlling wood as a programmable material for kinetic architecture.

Field-programmable beam reconfiguring based on digitally-controlled coding metasurface

NASA Astrophysics Data System (ADS)

Wan, Xiang; Qi, Mei Qing; Chen, Tian Yi; Cui, Tie Jun

2016-02-01

Digital phase shifters have been applied in traditional phased array antennas to realize beam steering. However, the phase shifter deals with the phase of the induced current; hence, it has to be in the path of each element of the antenna array, making the phased array antennas very expensive. Metamaterials and/or metasurfaces enable the direct modulation of electromagnetic waves by designing subwavelength structures, which opens a new way to control the beam scanning. Here, we present a direct digital mechanism to control the scattered electromagnetic waves using coding metasurface, in which each unit cell loads a pin diode to produce binary coding states of “1” and “0”. Through data lines, the instant communications are established between the coding metasurface and the internal memory of field-programmable gate arrays (FPGA). Thus, we realize the digital modulation of electromagnetic waves, from which we present the field-programmable reflective antenna with good measurement performance. The proposed mechanism and functional device have great application potential in new-concept radar and communication systems.

Field Programmable Gate Array for Implementation of Redundant Advanced Digital Feedback Control

NASA Technical Reports Server (NTRS)

King, K. D.

2003-01-01

The goal of this effort was to develop a digital motor controller using field programmable gate arrays (FPGAs). This is a more rugged approach than a conventional microprocessor digital controller. FPGAs typically have higher radiation (rad) tolerance than both the microprocessor and memory required for a conventional digital controller. Furthermore, FPGAs can typically operate at higher speeds. (While speed is usually not an issue for motor controllers, it can be for other system controllers.) Other than motor power, only a 3.3-V digital power supply was used in the controller; no analog bias supplies were used. Since most of the circuit was implemented in the FPGA, no additional parts were needed other than the power transistors to drive the motor. The benefits that FPGAs provide over conventional designs-lower power and fewer parts-allow for smaller packaging and reduced weight and cost.

Barriers to sustainable tuberculosis control in the Russian Federation health system.

PubMed Central

Atun, R. A.; Samyshkin, Y. A.; Drobniewski, F.; Skuratova, N. M.; Gusarova, G.; Kuznetsov, S. I.; Fedorin, I. M.; Coker, R. J.

2005-01-01

The Russian Federation has the eleventh highest tuberculosis burden in the world in terms of the total estimated number of new cases that occur each year. In 2003, 26% of the population was covered by the internationally recommended control strategy known as directly observed treatment (DOT) compared to an overall average of 61% among the 22 countries with the highest burden of tuberculosis. The Director-General of WHO has identified two necessary starting points for the scaling-up of interventions to control emerging infectious diseases. These are a comprehensive engagement with the health system and a strengthening of the health system. The success of programmes aimed at controlling infectious diseases is often determined by constraints posed by the health system. We analyse and evaluate the impact of the arrangements for delivering tuberculosis services in the Russian Federation, drawing on detailed analyses of barriers and incentives created by the organizational structures, and financing and provider-payment systems. We demonstrate that the systems offer few incentives to improve the efficiency of services or the effectiveness of tuberculosis control. Instead, the system encourages prolonged supervision through specialized outpatient departments in hospitals (known as dispensaries), multiple admissions to hospital and lengthy hospitalization. The implementation, and expansion and sustainability of WHO-approved methods of tuberculosis control in the Russian Federation are unlikely to be realized under the prevailing system of service delivery. This is because implementation does not take into account the wider context of the health system. In order for the control programme to be sustainable, the health system will need to be changed to enable services to be reconfigured so that incentives are created to reward improvements in efficiency and outcomes. PMID:15798846

A Hardware-in-the-Loop Simulation Platform for the Verification and Validation of Safety Control Systems

NASA Astrophysics Data System (ADS)

Rankin, Drew J.; Jiang, Jin

2011-04-01

Verification and validation (V&V) of safety control system quality and performance is required prior to installing control system hardware within nuclear power plants (NPPs). Thus, the objective of the hardware-in-the-loop (HIL) platform introduced in this paper is to verify the functionality of these safety control systems. The developed platform provides a flexible simulated testing environment which enables synchronized coupling between the real and simulated world. Within the platform, National Instruments (NI) data acquisition (DAQ) hardware provides an interface between a programmable electronic system under test (SUT) and a simulation computer. Further, NI LabVIEW resides on this remote DAQ workstation for signal conversion and routing between Ethernet and standard industrial signals as well as for user interface. The platform is applied to the testing of a simplified implementation of Canadian Deuterium Uranium (CANDU) shutdown system no. 1 (SDS1) which monitors only the steam generator level of the simulated NPP. CANDU NPP simulation is performed on a Darlington NPP desktop training simulator provided by Ontario Power Generation (OPG). Simplified SDS1 logic is implemented on an Invensys Tricon v9 programmable logic controller (PLC) to test the performance of both the safety controller and the implemented logic. Prior to HIL simulation, platform availability of over 95% is achieved for the configuration used during the V&V of the PLC. Comparison of HIL simulation results to benchmark simulations shows good operational performance of the PLC following a postulated initiating event (PIE).

Antagonistic Enzymes in a Biocatalytic pH Feedback System Program Autonomous DNA Hydrogel Life Cycles.

PubMed

Heinen, Laura; Heuser, Thomas; Steinschulte, Alexander; Walther, Andreas

2017-08-09

Enzymes regulate complex functions and active behavior in natural systems and have shown increasing prospect for developing self-regulating soft matter systems. Striving for advanced autonomous hydrogel materials with fully programmable, self-regulated life cycles, we combine two enzymes with an antagonistic pH-modulating effect in a feedback-controlled biocatalytic reaction network (BRN) and couple it to pH-responsive DNA hydrogels to realize hydrogel systems with distinct preprogrammable lag times and lifetimes in closed systems. The BRN enables precise and orthogonal internal temporal control of the "ON" and "OFF" switching times of the temporary gel state by modulation of programmable, nonlinear pH changes. The time scales are tunable by variation of the enzyme concentrations and additional buffer substances. The resulting material system operates in full autonomy after injection of the chemical fuels driving the BRN. The concept may open new applications inherent to DNA hydrogels, for instance, autonomous shape memory behavior for soft robotics. We further foresee general applicability to achieve autonomous life cycles in other pH switchable systems.

A water pumping control system with a programmable logic controller (PLC) and industrial wireless modules for industrial plants--an experimental setup.

PubMed

Bayindir, Ramazan; Cetinceviz, Yucel

2011-04-01

This paper describes a water pumping control system that is designed for production plants and implemented in an experimental setup in a laboratory. These plants contain harsh environments in which chemicals, vibrations or moving parts exist that could potentially damage the cabling or wires that are part of the control system. Furthermore, the data has to be transferred over paths that are accessible to the public. The control systems that it uses are a programmable logic controller (PLC) and industrial wireless local area network (IWLAN) technologies. It is implemented by a PLC, an communication processor (CP), two IWLAN modules, and a distributed input/output (I/O) module, as well as the water pump and sensors. Our system communication is based on an Industrial Ethernet and uses the standard Transport Control Protocol/Internet Protocol for parameterisation, configuration and diagnostics. The main function of the PLC is to send a digital signal to the water pump to turn it on or off, based on the tank level, using a pressure transmitter and inputs from limit switches that indicate the level of the water in the tank. This paper aims to provide a convenient solution in process plants where cabling is not possible. It also has lower installation and maintenance cost, provides reliable operation, and robust and flexible construction, suitable for industrial applications. Copyright © 2010 ISA. Published by Elsevier Ltd. All rights reserved.

Incipient fault detection and power system protection for spaceborne systems

NASA Technical Reports Server (NTRS)

Russell, B. Don; Hackler, Irene M.

1987-01-01

A program was initiated to study the feasibility of using advanced terrestrial power system protection techniques for spacecraft power systems. It was designed to enhance and automate spacecraft power distribution systems in the areas of safety, reliability and maintenance. The proposed power management/distribution system is described as well as security assessment and control, incipient and low current fault detection, and the proposed spaceborne protection system. It is noted that the intelligent remote power controller permits the implementation of digital relaying algorithms with both adaptive and programmable characteristics.

Using a geographical information system to plan a malaria control programme in South Africa.

PubMed Central

Booman, M.; Durrheim, D. N.; La Grange, K.; Martin, C.; Mabuza, A. M.; Zitha, A.; Mbokazi, F. M.; Fraser, C.; Sharp, B. L.

2000-01-01

INTRODUCTION: Sustainable control of malaria in sub-Saharan Africa is jeopardized by dwindling public health resources resulting from competing health priorities that include an overwhelming acquired immunodeficiency syndrome (AIDS) epidemic. In Mpumalanga province, South Africa, rational planning has historically been hampered by a case surveillance system for malaria that only provided estimates of risk at the magisterial district level (a subdivision of a province). METHODS: To better map control programme activities to their geographical location, the malaria notification system was overhauled and a geographical information system implemented. The introduction of a simplified notification form used only for malaria and a carefully monitored notification system provided the good quality data necessary to support an effective geographical information system. RESULTS: The geographical information system displays data on malaria cases at a village or town level and has proved valuable in stratifying malaria risk within those magisterial districts at highest risk, Barberton and Nkomazi. The conspicuous west-to-east gradient, in which the risk rises sharply towards the Mozambican border (relative risk = 4.12, 95% confidence interval = 3.88-4.46 when the malaria risk within 5 km of the border was compared with the remaining areas in these two districts), allowed development of a targeted approach to control. DISCUSSION: The geographical information system for malaria was enormously valuable in enabling malaria risk at town and village level to be shown. Matching malaria control measures to specific strata of endemic malaria has provided the opportunity for more efficient malaria control in Mpumalanga province. PMID:11196490

Wireless Control of Miniaturized Mobile Vehicle for Indoor Surveillance

NASA Astrophysics Data System (ADS)

Taha Saquib, Syed M.; Hameed, Sarmad; Usman Ali, Syed M.; Jafri, Raza; Amin, Imran

2013-12-01

This work is based upon electronic automation and Smart Control techniques, which constitute the basis of Control Area Network (CAN) and Personal Area Network (PAN). Bluetooth technology has been interfaced with a programmable controller to provide multi-dimensional vehicle control. A network is proposed which contains a remote, mobile host controller and an android operating system based mobile set (Client). The client communicates with a host controller through a Bluetooth device. The system incorporates duplex communication after successful confirmation between the host and the client; the android based mobile unit controls the vehicle through the Bluetooth module.

Financing tuberculosis control: the role of a global financial monitoring system.

PubMed

Floyd, Katherine; Pantoja, Andrea; Dye, Christopher

2007-05-01

Control of tuberculosis (TB), like health care in general, costs money. To sustain TB control at current levels, and to make further progress so that global targets can be achieved, information about funding needs, sources of funding, funding gaps and expenditures is important at global, regional, national and sub-national levels. Such data can be used for resource mobilization efforts; to document how funding requirements and gaps are changing over time; to assess whether increases in funding can be translated into increased expenditures and whether increases in expenditure are producing improvements in programme performance; and to identify which countries or regions have the greatest needs and funding gaps. In this paper, we discuss a global system for financial monitoring of TB control that was established in WHO in 2002. By early 2007, this system had accounted for actual or planned expenditures of more than US$ 7 billion and was systematically reporting financial data for countries that carry more than 90% of the global burden of TB. We illustrate the value of this system by presenting major findings that have been produced for the period 2002-2007, including results that are relevant to the achievement of global targets for TB control set for 2005 and 2015. We also analyse the strengths and limitations of the system and its relevance to other health-care programmes.

The changing global landscape of health and disease: addressing challenges and opportunities for sustaining progress towards control and elimination of neglected tropical diseases (NTDs).

PubMed

Molyneux, David H; Dean, Laura; Adekeye, Oluwatosin; Stothard, J Russell; Theobald, Sally

2018-03-16

The drive to control neglected tropical diseases (NTDs) has had many successes but to reach defined targets new approaches are required. Over the last decade, NTD control programmes have benefitted from increased resources, and from effective partnerships and long-term pharmaceutical donations. Although the NTD agenda is broader than those diseases of parasitic aetiology there has been a massive up-scaling of the delivery of medicines to some billion people annually. Recipients are often the poorest, with the aspiration that NTD programmes are key to universal health coverage as reflected within the 2030 United Nations sustainable development goals (SDGs). To reach elimination targets, the community will need to adapt global events and changing policy environments to ensure programmes are responsive and can sustain progress towards NTD targets. Innovative thinking embedded within regional and national health systems is needed. Policy makers, managers and frontline health workers are the mediators between challenge and change at global and local levels. This paper attempts to address the challenges to end the chronic pandemic of NTDs and achieve the SDG targets. It concludes with a conceptual framework that illustrates the interactions between these key challenges and opportunities and emphasizes the health system as a critical mediator.

Social control and coercion in addiction treatment: towards evidence-based policy and practice.

PubMed

Wild, T Cameron

2006-01-01

Social pressures are often an integral part of the process of seeking addiction treatment. However, scientists have not developed conclusive evidence on the processes, benefits and limitations of using legal, formal and informal social control tactics to inform policy makers, service providers and the public. This paper characterizes barriers to a robust interdisciplinary analysis of social control and coercion in addiction treatment and provides directions for future research. Conceptual analysis and review of key studies and trends in the area are used to describe eight implicit assumptions underlying policy, practice and scholarship on this topic. Many policies, programmes and researchers are guided by a simplistic behaviourist and health-service perspective on social controls that (a) overemphasizes the use of criminal justice systems to compel individuals into treatment and (b) fails to take into account provider, patient and public views. Policies and programmes that expand addiction treatment options deserve support. However, drawing a firm distinction between social controls (objective use of social pressure) and coercion (client perceptions and decision-making processes) supports a parallel position that rejects treatment policies, programmes, and associated practices that create client perceptions of coercion.

Biorational control programme for the German cockroach (Blattaria: Blattellidae) in selected urban communities.

PubMed

Shahraki, GholamHossein; Bin Ibrahim, Yusof; Noor, Hafidzi Mohd; Rafinejad, Javad; Shahar, Mohd Khadri

2010-08-01

This study assessed the effectiveness of a biorational control approach using 2% hydramethylnon gel bait on German cockroaches, Blattella germanica (L.) in some residential and hospital buildings in South Western Iran. In total, three buildings consisting of 150 apartment units and 101 hospital units were monitored weekly via sticky trap for German cockroach infestations over a period of eight months. These infested units were randomly subjected to intervention and control treatments. Pamphlets and posters were provided and lectures were given to support the educational programmes as a tactic of the biorational system. Survey on cockroach index for intervention units showed 67-94% recovery to achieve clean level of infestation for intervention units of the residential buildings and 83% for the hospital. Mean percentage reductions for treatment groups throughout the 15-week treatment period were 76.8% for the residential buildings and 88.1% for the hospital, showing significant differences compared to the control groups. Linear regression of infestation rates were recorded weekly after treatment and their negative slope for treatment groups substantiated significant reductions for interventions. The results of this study showed that biorational control method, using gel bait, educational programmes and sanitation, is an effective way to manage German cockroach infestation.

Thermal Vacuum Control Systems Options for Test Facilities

NASA Technical Reports Server (NTRS)

Marchetti, John

2008-01-01

This presentation suggests several Thermal Vacuum System (TVAC) control design approach methods for TVAC facilities. Over the past several years many aerospace companies have or are currently upgrading their TVAC testing facilities whether it be by upgrading old equipment or purchasing new. In doing so they are updating vacuum pumping and thermal capabilities of their chambers as well as their control systems. Although control systems are sometimes are considered second to the vacuum or thermal system upgrade process, they should not be taken lightly and must be planned and implemented with the equipment it is to control. Also, emphasis should be placed on how the operators will use the system as well as the requirements of "their" customers. Presented will be various successful methods of TVAC control systems from Programmable Logic Controller (PLC) based to personal computer (PC) based control.

Ethiopia Schistosomiasis and Soil-Transmitted Helminthes Control Programme: Progress and Prospects.

PubMed

Negussu, Nebiyu; Mengistu, Birhan; Kebede, Biruck; Deribe, Kebede; Ejigu, Ephrem; Tadesse, Gemechu; Mekete, Kalkidan; Sileshi, Mesfin

2017-01-01

Schistosomiasis and soil-transmitted helminthes are among seventeen WHO prioritized neglected tropical diseases that infect humans. These parasitic infections can be treated using single-dose and safe drugs. Ethiopia successfully mapped the distribution of these infections nationwide. According to the mapping there are an estimated 37.3 million people living in schistosomiasis endemic areas, and 79 million in schistosomiasis and soil-transmitted helminthes endemic areas. The Federal Ministry of Health successfully scaled up Schistosomiasis and schistosomiasis and soil-transmitted helminthes intervention in endemic areas and treated over 19 million individuals in 2015. The Ministry of Health has made a huge effort to establish neglected tropical diseases, including schistosomiasis and soil-transmitted helminthes program in the health system which helped to map majority of the woredas and initiate nationwide intervention. The National control programme is designed to achieve elimination for those diseases as a major public health problem by 2020 and aim to attain transmission break by 2025. The programme focuses on reaching those school-aged children who are not attending school, integration between neglected tropical diseases programme, and further collaboration with the WASH actors.

The Australian tar derby: the origins and fate of a low tar harm reduction programme

PubMed Central

King, W; Carter, S; Borland, R; Chapman, S; Gray, N

2003-01-01

Objective: To document the development of the low tar harm reduction programme in Australia, including tobacco industry responses. Data sources: Tobacco industry documents, retail tobacco journals, newspapers, medical journals, and Anti-Cancer Council of Victoria (ACCV) newsletters and archival records. Study selection: Documents on the strategies and knowledge bases of the ACCV, other Australian health authorities, and the tobacco industry. Results: The ACCV built a durable system for measuring and publicising the tar and nicotine yields of Australian cigarettes and influencing their development. The tobacco industry initially sought to block the development of this system but later appeared to cooperate with it, as is evidenced by the current market dominance of low tar brands. However, behind the scenes, the industry used its substantial knowledge advantage regarding compensatory smoking and its ability to re-engineer cigarettes to gain effective control of the system and subvert the ACCV's objectives. Conclusions: Replacement of the low tar programme with new means of minimising the harms from cigarette smoking should be a policy priority for the Australian government. This will require regulation, rather than further voluntary agreements, and stringent monitoring of successor programmes will be necessary. PMID:14645950

Electronic processing and control system with programmable hardware

NASA Technical Reports Server (NTRS)

Alkalaj, Leon (Inventor); Fang, Wai-Chi (Inventor); Newell, Michael A. (Inventor)

1998-01-01

A computer system with reprogrammable hardware allowing dynamically allocating hardware resources for different functions and adaptability for different processors and different operating platforms. All hardware resources are physically partitioned into system-user hardware and application-user hardware depending on the specific operation requirements. A reprogrammable interface preferably interconnects the system-user hardware and application-user hardware.

XRF inductive bead fusion and PLC based control system

NASA Astrophysics Data System (ADS)

Zhu, Jin-hong; Wang, Ying-jie; Shi, Hong-xin; Chen, Qing-ling; Chen, Yu-xi

2009-03-01

In order to ensure high-quality X-ray fluorescence spectrometry (XRF) analysis, an inductive bead fusion machine was developed. The prototype consists of super-audio IGBT induction heating power supply, rotation and swing mechanisms, and programmable logic controller (PLC). The system can realize sequence control, mechanical movement control, output current and temperature control. Experimental results show that the power supply can operate at an ideal quasi-resonant state, in which the expected power output and the required temperature can be achieved for rapid heating and the uniform formation of glass beads respectively.

Programmable Oscillator

NASA Technical Reports Server (NTRS)

Quirk, Kevin J.; Patawaran, Ferze D.; Nguyen, Danh H.; Lee, Clement G.; Nguyen, Huy

2011-01-01

A programmable oscillator is a frequency synthesizer with an output phase that tracks an arbitrary function. An offset, phase-locked loop circuit is used in combination with an error control feedback loop to precisely control the output phase of the oscillator. To down-convert the received signal, several stages of mixing may be employed with the compensation for the time-base distortion of the carrier occurring at any one of those stages. In the Goldstone Solar System Radar (GSSR), the compensation occurs in the mixing from an intermediate frequency (IF), whose value is dependent on the station and band, to a common IF used in the final stage of down-conversion to baseband. The programmable oscillator (PO) is used in the final stage of down-conversion to generate the IF, along with a time-varying phase component that matches the time-base distortion of the carrier, thus removing it from the final down-converted signal.

The WHO AFRO external quality assessment programme (EQAP): Linking laboratory networks through EQA programmes.

PubMed

Boeras, Debrah I; Peeling, Rosanna W; Onyebujoh, Philip; Yahaya, Ali A; Gumede-Moeletsi, Hieronyma N; Ndihokubwayo, Jean B

2016-01-01

External Quality Assessment (EQA) surveys performed by the World Health Organization Regional Office for Africa (WHO AFRO) revealed the need for the strengthening of public health microbiology laboratories, particularly for testing of epidemic-prone diseases in the African Region. These surveys revealed common issues such as supply chain management, skilled personnel, logistical support and overall lack of quality standards. For sustainable improvements to health systems as well as global health security, deficiencies identified need to be actively corrected through robust quality assurance programmes and implementation of laboratory quality management systems. Given all the pathogens of public health importance, an external quality assessment programme with a focus on vaccine-preventable diseases and emerging and re-emerging dangerous pathogens is important, and should not be stand-alone, but integrated within laboratory networks as seen in polio, measles, yellow fever and rubella. In 2015, WHO AFRO collaborated with the US Centers for Disease Control and Prevention, the London School of Hygiene & Tropical Medicine and partners in a series of consultations with countries and national and regional EQA providers for the development of quality assurance models to support HIV point-of-care testing and monitoring. These consultations revealed similar challenges as seen in the WHO AFRO surveys. WHO AFRO brought forth its experience in implementing quality standards for health programmes, and also opened discussions on how lessons learned through such established programmes can be utilised to supporting and strengthening the introduction of early infant diagnosis of HIV and viral load point-of-care testing. An optimised external quality assessment programme will impact the ability of countries to meet core capacities, providing improved quality management systems, improving the confidence of diagnostic network services in Africa, and including capacities to detect events of international public health importance.

The WHO AFRO external quality assessment programme (EQAP): Linking laboratory networks through EQA programmes

PubMed Central

Yahaya, Ali A.; Gumede-Moeletsi, Hieronyma N.

2016-01-01

External Quality Assessment (EQA) surveys performed by the World Health Organization Regional Office for Africa (WHO AFRO) revealed the need for the strengthening of public health microbiology laboratories, particularly for testing of epidemic-prone diseases in the African Region. These surveys revealed common issues such as supply chain management, skilled personnel, logistical support and overall lack of quality standards. For sustainable improvements to health systems as well as global health security, deficiencies identified need to be actively corrected through robust quality assurance programmes and implementation of laboratory quality management systems. Given all the pathogens of public health importance, an external quality assessment programme with a focus on vaccine-preventable diseases and emerging and re-emerging dangerous pathogens is important, and should not be stand-alone, but integrated within laboratory networks as seen in polio, measles, yellow fever and rubella. In 2015, WHO AFRO collaborated with the US Centers for Disease Control and Prevention, the London School of Hygiene & Tropical Medicine and partners in a series of consultations with countries and national and regional EQA providers for the development of quality assurance models to support HIV point-of-care testing and monitoring. These consultations revealed similar challenges as seen in the WHO AFRO surveys. WHO AFRO brought forth its experience in implementing quality standards for health programmes, and also opened discussions on how lessons learned through such established programmes can be utilised to supporting and strengthening the introduction of early infant diagnosis of HIV and viral load point-of-care testing. An optimised external quality assessment programme will impact the ability of countries to meet core capacities, providing improved quality management systems, improving the confidence of diagnostic network services in Africa, and including capacities to detect events of international public health importance. PMID:28879135

Building leadership capacity and future leaders in operational research in low-income countries: why and how?

PubMed

Zachariah, R; Reid, T; Srinath, S; Chakaya, J; Legins, K; Karunakara, U; Harries, A D

2011-11-01

Very limited operational research (OR) emerges from programme settings in low-income countries where the greatest burden of disease lies. The price paid for this void includes a lack of understanding of how health systems are actually functioning, not knowing what works and what does not, and an inability to propose adapted and innovative solutions to programme problems. We use the National Tuberculosis Control Programme as an example to advocate for strong programme-level leadership to steer OR and build viable relationships between programme managers, researchers and policy makers. We highlight the need to create a stimulating environment for conducting OR and identify some of the main practical challenges and enabling factors at programme level. We focus on the important role of an OR focal point within programmes and practical approaches to training that can deliver timely and quantifiable outputs. Finally, we emphasise the need to measure successful OR leadership development at programme level and we propose parameters by which this can be assessed. This paper 1) provides reasons why programmes should take the lead in coordinating and directing OR, 2) identifies the practical challenges and enabling factors for implementing, managing and sustaining OR and 3) proposes parameters for measuring successful leadership capacity development in OR.

Knowledge gaps that hamper prevention and control of Mycobacterium avium subspecies paratuberculosis infection.

PubMed

Barkema, H W; Orsel, K; Nielsen, S S; Koets, A P; Rutten, V P M G; Bannantine, J P; Keefe, G P; Kelton, D F; Wells, S J; Whittington, R J; Mackintosh, C G; Manning, E J; Weber, M F; Heuer, C; Forde, T L; Ritter, C; Roche, S; Corbett, C S; Wolf, R; Griebel, P J; Kastelic, J P; De Buck, J

2018-05-01

In the last decades, many regional and country-wide control programmes for Johne's disease (JD) were developed due to associated economic losses, or because of a possible association with Crohn's disease. These control programmes were often not successful, partly because management protocols were not followed, including the introduction of infected replacement cattle, because tests to identify infected animals were unreliable, and uptake by farmers was not high enough because of a perceived low return on investment. In the absence of a cure or effective commercial vaccines, control of JD is currently primarily based on herd management strategies to avoid infection of cattle and restrict within-farm and farm-to-farm transmission. Although JD control programmes have been implemented in most developed countries, lessons learned from JD prevention and control programmes are underreported. Also, JD control programmes are typically evaluated in a limited number of herds and the duration of the study is less than 5 year, making it difficult to adequately assess the efficacy of control programmes. In this manuscript, we identify the most important gaps in knowledge hampering JD prevention and control programmes, including vaccination and diagnostics. Secondly, we discuss directions that research should take to address those knowledge gaps. © 2017 Blackwell Verlag GmbH.

Integrating DNA strand-displacement circuitry with DNA tile self-assembly

PubMed Central

Zhang, David Yu; Hariadi, Rizal F.; Choi, Harry M.T.; Winfree, Erik

2013-01-01

DNA nanotechnology has emerged as a reliable and programmable way of controlling matter at the nanoscale through the specificity of Watson–Crick base pairing, allowing both complex self-assembled structures with nanometer precision and complex reaction networks implementing digital and analog behaviors. Here we show how two well-developed frameworks, DNA tile self-assembly and DNA strand-displacement circuits, can be systematically integrated to provide programmable kinetic control of self-assembly. We demonstrate the triggered and catalytic isothermal self-assembly of DNA nanotubes over 10 μm long from precursor DNA double-crossover tiles activated by an upstream DNA catalyst network. Integrating more sophisticated control circuits and tile systems could enable precise spatial and temporal organization of dynamic molecular structures. PMID:23756381

Advanced space system analysis software. Technical, user, and programmer guide

NASA Technical Reports Server (NTRS)

Farrell, C. E.; Zimbelman, H. F.

1981-01-01

The LASS computer program provides a tool for interactive preliminary and conceptual design of LSS. Eight program modules were developed, including four automated model geometry generators, an associated mass properties module, an appendage synthesizer module, an rf analysis module, and an orbital transfer analysis module. The existing rigid body controls analysis module was modified to permit analysis of effects of solar pressure on orbital performance. A description of each module, user instructions, and programmer information are included.

A compact roller-gear pitch-yaw joint module: Design and control issues

NASA Technical Reports Server (NTRS)

Dohring, Mark E.; Anderson, William J.; Newman, Wyatt S.; Rohn, Douglas A.

1993-01-01

Robotic systems have been proposed as a means of accomplishing assembly and maintenance tasks in space. The desirable characteristics of these systems include compact size, low mass, high load capacity, and programmable compliance to improve assembly performance. In addition, the mechanical system must transmit power in such a way as to allow high performance control of the system. Efficiency, linearity, low backlash, low torque ripple, and low friction are all desirable characteristics. This work presents a pitch-yaw joint module designed and built to address these issues. Its effectiveness as a two degree-of-freedom manipulator using natural admittance control, a method of force control, is demonstrated.

PC-Based systems for experiments in optical characterization of materials

NASA Astrophysics Data System (ADS)

López-Mora, C. C.; Trejo-Duran, M.; Alvarado-Méndez, E.; Rojas-Laguna, R.; Vargas-Rodríguez, E.; Estudillo-Ayala, J. M.; Mata-Chavez, R.; Sukhoivanov, I.; García-Pérez, A.; Ibarra-Manzano, O. G.; Andrade-Lucio, J. A.

2011-01-01

An automatic control for applications of optical characterization of materials using the optical Z-Scan technique is presented in this work. The emphasis is placed in the design of the graphical user interface (GUI) and the automation process. For this purpose, we use a USB data acquisition module with programmable I/O ports for control and signals acquisition for the complete system. The control software was developed using the graphical programming language LabVIEW® and compiled in order to obtain a portable system with the hardware used in this work.

Static power reduction for midpoint-terminated busses

DOEpatents

Coteus, Paul W [Yorktown Heights, NY; Takken, Todd [Brewster, NY

2011-01-18

A memory system is disclosed which is comprised of a memory controller and addressable memory devices such as DRAMs. The invention provides a programmable register to control the high vs. low drive state of each bit of a memory system address and control bus during periods of bus inactivity. In this way, termination voltage supply current can be minimized, while permitting selected bus bits to be driven to a required state. This minimizes termination power dissipation while not affecting memory system performance. The technique can be extended to work for other high-speed busses as well.

The effect of a smartphone-based coronary heart disease prevention (SBCHDP) programme on awareness and knowledge of CHD, stress, and cardiac-related lifestyle behaviours among the working population in Singapore: a pilot randomised controlled trial.

PubMed

Zhang, Hui; Jiang, Ying; Nguyen, Hoang D; Poo, Danny Chiang Choon; Wang, Wenru

2017-03-14

Coronary heart disease (CHD) is the most prevalent type of cardiac disease among adults worldwide, including those in Singapore. Most of its risk factors, such as smoking, physical inactivity and high blood pressure, are preventable. mHealth has improved in the last decade, showing promising results in chronic disease prevention and health promotion worldwide. Our aim was to develop and examine the effect of a 4-week Smartphone-Based Coronary Heart Disease Prevention (SBCHDP) programme in improving awareness and knowledge of CHD, perceived stress as well as cardiac-related lifestyle behaviours in the working population of Singapore. The smartphone app "Care4Heart" was developed as the main component of the programme. App content was reviewed and validated by a panel of experts, including two cardiologists and two experienced cardiology-trained nurses. A pilot randomised controlled trial was conducted. Eighty working people were recruited and randomised to either the intervention group (n = 40) or the control group (n = 40). The intervention group underwent a 4-week SBCHDP programme, whereas the control group were offered health promotion websites only. The participants' CHD knowledge, perceived stress and behavioural risk factors were measured at baseline and on the 4th week using the Heart Disease Fact Questionnaire-2, Perceived Stress Scale, and Behavioural Risk Factor Surveillance System. After the SBCHDP programme, participants in the intervention group had a better awareness of CHD being the second leading cause of death in Singapore (X 2   = 6.486, p = 0.039), a better overall CHD knowledge level (t = 3.171, p = 0.002), and better behaviour concerning blood cholesterol control (X 2  = 4.54, p = 0.033) than participants in the control group. This pilot study partially confirmed the positive effects of the SBCHDP programme in improving awareness and knowledge of CHD among the working population. Due to the small sample size and short follow-up period, this study was underpowered to detect significant differences between groups. A full-scale longitudinal study is required in the future to confirm the effectiveness of the SBCHDP programme.

Control programme for cystic echinococcosis in Uruguay.

PubMed

Irabedra, Pilar; Ferreira, Ciro; Sayes, Julio; Elola, Susana; Rodríguez, Miriam; Morel, Noelia; Segura, Sebastian; Santos, Estela Dos; Guisantes, Jorge A

2016-05-24

Cystic echinococcosis is a highly endemic parasitic zoonosis that is present in the Southern Cone countries of America. For several decades, various prevention and control programmes have been implemented in different countries and regions, with varying results. In Uruguay, a new control programme was implemented in 2006 that employed new strategies for canine diagnosis and treatment, dog population control, diagnosis in humans, epidemiological surveillance, and health education, including community participation. The control programme in Uruguay addresses the control and surveillance of the disease from a holistic perspective based on Primary Health Care, which has strengthened the community's participation in developing and coordinating activities in an interdisciplinary manner. Similarly, the control programme that is currently implemented is based on a risk-focused approach. The surveillance and control measures were focused on small villages and extremely poor urban areas. In this study, the strategies used and the results obtained from 2008-2013 are analysed and discussed.

APPARATUS FOR EXPOSING ESTUARINE AQUATIC ORGANISMS TO TOXICANTS IN CONSTANT AND FLUCTUATING SALINITY REGIMES

EPA Science Inventory

A programmable control system for salinity has been developed and coupled with a flow-through toxicant exposure system. The resulting apparatus allow study of influences of constant and fluctuating salinity regimes on responses of One organisms exposed to selected pollutants. Con...

43. Upper level, left to rightground missile guidance system liquid ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

43. Upper level, left to right--ground missile guidance system liquid cooling equipment, guidance and control coupler rack, programmer group - Ellsworth Air Force Base, Delta Flight, Launch Facility, On County Road T512, south of Exit 116 off I-90, Interior, Jackson County, SD

Magnetics and Power System Upgrades for the Pegasus-U Experiment

NASA Astrophysics Data System (ADS)

Preston, R. C.; Bongard, M. W.; Fonck, R. J.; Lewicki, B. T.

2014-10-01

To support the missions of developing local helicity injection startup and exploiting advanced tokamak physics studies at near unity aspect ratio, the proposed Pegasus-U will include expanded magnetic systems and associated power supplies. A new centerstack increases the toroidal field seven times to 1 T and the volt-seconds by a factor of six while maintaining operation at an aspect ratio of 1.2. The poloidal field magnet system is expanded to support improved shape control and robust double or single null divertor operation at the full plasma current of 0.3 MA. An integrated digital control system based on Field Programmable Gate Arrays (FPGAs) provides active feedback control of all magnet currents. Implementation of the FPGAs is achieved with modular noise reducing electronics. The digital feedback controllers replace the existing analog systems and switch multiplexing technology. This will reduce noise sensitivity and allow the operational Ohmic power supply voltage to increase from 2100 V to its maximum capacity of 2400 V. The feedback controller replacement also allows frequency control for ``freewheeling''--stopping the switching for a short interval and allowing the current to coast. The FPGAs assist in optimizing pulse length by having programmable switching events to minimize energy losses. They also allow for more efficient switching topologies that provide improved stored energy utilization, and support increasing the pulse length from 25 ms to 50-100 ms. Work supported by US DOE Grant DE-FG02-96ER54375.

Strengthening individual capacity in monitoring and evaluation of malaria control programmes to streamline M&E systems and enhance information use in malaria endemic countries.

PubMed

Garley, Ashley; Eckert, Erin; Sie, Ali; Ye, Maurice; Malm, Keziah; Afari, Edwin A; Sawadogo, Mamadou; Herrera, Samantha; Ivanovich, Elizabeth; Ye, Yazoume

2016-05-28

Malaria control interventions in most endemic countries have intensified in recent years and so there is a need for a robust monitoring and evaluation (M&E) system to measure progress and achievements. Providing programme and M&E officers with the appropriate skills is a way to strengthen malaria's M&E systems and enhance information use for programmes' implementation. This paper describes a recent effort in capacity strengthening for malaria M&E in sub-Saharan Africa (SSA). From 2010 to 2014, capacity-strengthening efforts consisted of organizing regional in-person workshops for M&E of malaria programmes for Anglophone and Francophone countries in SSA in collaboration with partners from Ghana and Burkina Faso. Open-sourced online courses were also available in English. A post-workshop assessment was conducted after 5 years to assess the effects of these regional workshops and identify gaps in capacity. The regional workshops trained 181 participants from 28 countries from 2010 to 2014. Trained participants were from ministries of health, national malaria control and elimination programmes, non-governmental organizations, and development partners. The average score (%) for participants' knowledge tests increased from pretest to posttest for Anglophone workshops (2011: 59 vs. 76, 2012: 41 vs. 63, 2013: 51 vs. 73; 2014: 50 vs. 74). Similarly, Francophone workshop posttest scores increased, but were lower than Anglophone due to higher scores at pretest. (2011: 70 vs. 76, 2012: 74 vs. 79, 2013: 61 vs. 68; 2014: 64 vs. 75). Results of the post-workshop assessment revealed that participants retained practical M&E knowledge and skills for malaria programs, but there is a need for a module on malaria surveillance adapted to the pre-elimination context. The workshops were successful because of the curriculum content, facilitation quality, and the engagement of partner institutions with training expertise. Results from the post-workshop assessment will guide the curriculum's development and restructuring for the next phase of workshops. Country-specific malaria M&E capacity needs assessments may also inform this process as countries reduce malaria burden.

Space Technology for Medical Aids

NASA Technical Reports Server (NTRS)

1982-01-01

Under one of the earliest contracts awarded in the Apollo lunar landing program, Parker Hannifin Corporation developed and produced equipment for controlling the flow of propellants into the mammoth engines of the Saturn moonbooster. Today, Parker is supplying the huge valves that control propellant flow from the Space Shuttle's external fuel tank to the engines of the Shuttle Orbiter as well as the "peanut valve," named for its small size. In 1977, NASA, recognizing the company's special expertise in miniature systems, asked Parker to participate in the development of an implantable artificial sphincter for control of urinary incontinence. The company's peanut valve experience provided an ideal base for a new biomedical project, the Programmable Implantable Medication System (PIMS) for continuous, computer-directed delivery of precisely metered medication -- insulin, for example -- within a patient's body. The work on PIMS also inspired development of Micromed, a related programmable medication device for external, rather than implantable use. The Biomedical Products Division has also applied its fluid handling expertise to a drugless therapy system called Cryomax for the treatment of such disorders as rheumatoid arthritis and lupus.

Development and use of the generic WHO/CDC logic model for vitamin and mineral interventions in public health programmes

PubMed Central

De-Regil, Luz Maria; Peña-Rosas, Juan Pablo; Flores-Ayala, Rafael; del Socorro Jefferds, Maria Elena

2015-01-01

Objective Nutrition interventions are critical to achieve the Millennium Development Goals; among them, micronutrient interventions are considered cost-effective and programmatically feasible to scale up, but there are limited tools to communicate the programme components and their relationships. The WHO/CDC (Centers for Disease Control and Prevention) logic model for micronutrient interventions in public health programmes is a useful resource for planning, implementation, monitoring and evaluation of these interventions, which depicts the programme theory and expected relationships between inputs and expected Millennium Development Goals. Design The model was developed by applying principles of programme evaluation, public health nutrition theory and programmatic expertise. The multifaceted and iterative structure validation included feedback from potential users and adaptation by national stakeholders involved in public health programmes' design and implementation. Results In addition to the inputs, main activity domains identified as essential for programme development, implementation and performance include: (i) policy; (ii) products and supply; (iii) delivery systems; (iv) quality control; and (v) behaviour change communication. Outputs encompass the access to and coverage of interventions. Outcomes include knowledge and appropriate use of the intervention, as well as effects on micronutrient intake, nutritional status and health of target populations, for ultimate achievement of the Millennium Development Goals. Conclusions The WHO/CDC logic model simplifies the process of developing a logic model by providing a tool that has identified high-priority areas and concepts that apply to virtually all public health micronutrient interventions. Countries can adapt it to their context in order to support programme design, implementation, monitoring and evaluation for the successful scale-up of nutrition interventions in public health. PMID:23507463

Worthy test programmes and developments of smart electromechanical actuators

NASA Astrophysics Data System (ADS)

Annaz, Fawaz Yahya

2007-02-01

Early aircraft flight control systems were totally manually operated, that is, the force required to move flight control surfaces was generated by the pilot and transmitted by cables and rods. As aerodynamics and airframe technology developed and speeds increased, the forces required to move control surfaces increased, as did the number of surfaces. In order to provide the extra power required, hydraulic technology was introduced. To date, the common element in the development of flight control systems has been, mainly, restricted to this type of technology. This is because of its proven reliability and the lack of alternative technologies. However, the technology to build electromechanically actuated primary flight control systems is now available. Motors developing the required power at the required frequencies are now possible (with the use of high energy permanent magnetic materials and compact high speed electronic circuits). It is this particular development which may make the concept of an 'all electric aircraft' realizable in the near future. The purpose of the all electric aircraft concept is the consolidation of all secondary power systems into electric power. The elimination of hydraulic and pneumatic secondary power systems will improve maintainability, flight readiness and use of energy. This paper will present the development of multi-lane smart electric actuators and offer an insight into other subsequent fields of study. The key areas of study may be categorized as follows. State of the art hydraulic actuators. Electromechanical actuator system test programmes. Development of electromechanical actuators. Modelling of electromechanical actuators.

Management of herbicide resistance in wheat cropping systems: learning from the Australian experience.

PubMed

Walsh, Michael J; Powles, Stephen B

2014-09-01

Herbicide resistance continues to escalate in weed populations infesting global wheat (Triticum aestivum L.) crops, threatening grain production and thereby food supply. Conservation wheat production systems are reliant on the use of efficient herbicides providing low-cost, selective weed control in intensive cropping systems. The resistance-driven loss of herbicide resources combined with limited potential for new herbicide molecules means greater emphasis must be placed on preserving existing herbicides. For more than two decades, since the initial recognition of the dramatic consequences of herbicide resistance, the challenge of introducing additional weed control strategies into herbicide-based weed management programmes has been formidable. Throughout this period, herbicide resistance has expanded unabated across the world's wheat production regions. However, in Australia, where herbicide resources have become desperately depleted, the adoption of harvest weed seed control is evidence, at last, of a successful approach to sustainable weed management in wheat production systems. Growers routinely including strategies to target weed seeds during crop harvest, as part of herbicide-based weed management programmes, are now realising significant weed control and crop production benefits. When combined with an attitude of zero weed tolerance, there is evidence of a sustainable weed control future for wheat production systems. The hard-learned lessons of Australian growers can now be viewed by global wheat producers as an example of how to stop the continual loss of herbicide resources in productive cropping systems. © 2013 Society of Chemical Industry.

Reconfigurable virtual electrowetting channels.

PubMed

Banerjee, Ananda; Kreit, Eric; Liu, Yuguang; Heikenfeld, Jason; Papautsky, Ian

2012-02-21

Lab-on-a-chip systems rely on several microfluidic paradigms. The first uses a fixed layout of continuous microfluidic channels. Such lab-on-a-chip systems are almost always application specific and far from a true "laboratory." The second involves electrowetting droplet movement (digital microfluidics), and allows two-dimensional computer control of fluidic transport and mixing. The merging of the two paradigms in the form of programmable electrowetting channels takes advantage of both the "continuous" functionality of rigid channels based on which a large number of applications have been developed to date and the "programmable" functionality of digital microfluidics that permits electrical control of on-chip functions. In this work, we demonstrate for the first time programmable formation of virtual microfluidic channels and their continuous operation with pressure driven flows using an electrowetting platform. Experimental, theoretical, and numerical analyses of virtual channel formation with biologically relevant electrolyte solutions and electrically-programmable reconfiguration are presented. We demonstrate that the "wall-less" virtual channels can be formed reliably and rapidly, with propagation rates of 3.5-3.8 mm s(-1). Pressure driven transport in these virtual channels at flow rates up to 100 μL min(-1) is achievable without distortion of the channel shape. We further demonstrate that these virtual channels can be switched on-demand between multiple inputs and outputs. Ultimately, we envision a platform that would provide rapid prototyping of microfluidic concepts and would be capable of a vast library of functions and benefitting applications from clinical diagnostics in resource-limited environments to rapid system prototyping to high throughput pharmaceutical applications.

A new computer-controlled multi-channel high voltage supply system for GRACE instrumentation

NASA Astrophysics Data System (ADS)

Manna, A.; Chakrabarti, S.; Mukhopadhayay, P. K.

2002-03-01

The high energy gamma ray telescopes being set up by the Bhabha Atomic Research Institute Centre (BARC) at Mt. Abu, Rajasthan, as part of the GRACE project, require a very large number (~ 1000) of programmable high voltage power supplies for biasing photomultiplier tubes for the detection and characterization of the atmospheric Cerenkov events. These HV supplies need to be very compact, lightweight and rugged, as they will be mounted on the base of the moving telescope. This paper describes the design aspects of the overall HV system and the performance of the prototype HV modules developed for such applications. In the new design, the inverter switching frequency of the HV supplies has been increased threefold as compared to the earlier design, and surface mounted devices have been used to achieve overall size and weight reductions. The system consists of multiple HV modules, each containing 16 independently programmable HV supplies. Each HV module has an on-board micro-controller for doing control and supervisory functions and is interconnected via a serial 12C bus. The HV supplies have built in over voltage/current, thermal overload protections with output voltage readback and adjustable slew rate control facilities.

What do community football players think about different exercise-training programmes? Implications for the delivery of lower limb injury prevention programmes

PubMed Central

Finch, Caroline F; Doyle, Tim LA; Dempsey, Alasdair R; Elliott, Bruce C; Twomey, Dara M; White, Peta E; Diamantopoulou, Kathy; Young, Warren; Lloyd, David G

2014-01-01

Background Players are the targeted end-users and beneficiaries of exercise-training programmes implemented during coach-led training sessions, and the success of programmes depends upon their active participation. Two variants of an exercise-training programme were incorporated into the regular training schedules of 40 community Australian Football teams, over two seasons. One variant replicated common training practices, while the second was an evidence-based programme to alter biomechanical and neuromuscular factors related to risk of knee injuries. This paper describes the structure of the implemented programmes and compares players’ end-of-season views about the programme variants. Methods This study was nested within a larger group-clustered randomised controlled trial of the effectiveness of two exercise-training programmes (control and neuromuscular control (NMC)) for preventing knee injuries. A post-season self-report survey, derived from Health Belief Model constructs, included questions to obtain players’ views about the benefits and physical challenges of the programme in which they participated. Results Compared with control players, those who participated in the NMC programme found it to be less physically challenging but more enjoyable and potentially of more benefit. Suggestions from players about potential improvements to the training programme and its future implementation included reducing duration, increasing range of drills/exercises and promoting its injury prevention and other benefits to players. Conclusions Players provide valuable feedback about the content and focus of implemented exercise-training programmes, that will directly inform the delivery of similar, or more successful, programmes in the future. PMID:24047571

47 CFR 95.1209 - Permissible communications.

Code of Federal Regulations, 2011 CFR

2011-10-01

... to which the MedRadio implant or body-worn transmitter is used. (c) MedRadio programmer/control...Radio programmer/control transmitters may transmit only non-voice data containing operational... shall transmit except in response to a transmission from a MedRadio programmer/control transmitter or in...

Programmable Logic Controllers.

ERIC Educational Resources Information Center

Insolia, Gerard; Anderson, Kathleen

This document contains a 40-hour course in programmable logic controllers (PLC), developed for a business-industry technology resource center for firms in eastern Pennsylvania by Northampton Community College. The 10 units of the course cover the following: (1) introduction to programmable logic controllers; (2) DOS primer; (3) prerequisite…

Inclusion of persons with disabilities in systems of social protection: a population-based survey and case–control study in Peru

PubMed Central

Bernabe-Ortiz, Antonio; Diez-Canseco, Francisco; Vasquez, Alberto; Kuper, Hannah; Walsham, Matthew; Blanchet, Karl

2016-01-01

Objective This study aims to assess the needs of people with disabilities and their level of inclusion in social protection programmes. Design Population based-survey with a nested case–control study. Setting Morropon, a semiurban district located in Piura, northern Peru. Participants For the population survey, a two-stage sampling method was undertaken using data from the most updated census available and information of each household member aged ≥5 years was collected. In the nested case–control study, only one participant, case or control, per household was included in the study. Primary and secondary outcome measures Disability was screened using the Washington Group short questionnaire. A case, defined as an individual aged ≥5 years with disabilities, was matched with one control without disabilities by sex and age (±5 years). Information was collected on socioeconomic status, education, health and rehabilitation and social protection participation. Results The survey included 3684 participants, 1848 (50.1%) females, mean age: 36.4 (SD: 21.7). A total of 290 participants (7.9%; 95% CI 7.0% to 8.7%) were classified as having disability. Adults with disabilities were more likely to be single (OR=3.40; 95% CI 1.54 to 7.51) and not to be working (OR=4.36; 95% CI 2.26 to 8.40), while those who did work were less likely to receive the national minimum wage (ie, 750 PEN or about US$265; p=0.007). People with disabilities were more likely to experience health problems. There was no difference between those enrolled in any social protection programme among participants with and without disabilities. Conclusions People with disabilities were found to have higher needs for social protection, but were not more likely to be enrolled in social protection programmes. The Peruvian social protection system should consider adding disability status to selection criteria in their cash transfer programmes as well as implementing disability-specific interventions. PMID:27566630

Cost and results of information systems for health and poverty indicators in the United Republic of Tanzania.

PubMed Central

Rommelmann, Vanessa; Setel, Philip W.; Hemed, Yusuf; Angeles, Gustavo; Mponezya, Hamisi; Whiting, David; Boerma, Ties

2005-01-01

OBJECTIVE: To examine the costs of complementary information generation activities in a resource-constrained setting and compare the costs and outputs of information subsystems that generate the statistics on poverty, health and survival required for monitoring, evaluation and reporting on health programmes in the United Republic of Tanzania. METHODS: Nine systems used by four government agencies or ministries were assessed. Costs were calculated from budgets and expenditure data made available by information system managers. System coverage, quality assurance and information production were reviewed using questionnaires and interviews. Information production was characterized in terms of 38 key sociodemographic indicators required for national programme monitoring. FINDINGS: In 2002-03 approximately US$ 0.53 was spent per Tanzanian citizen on the nine information subsystems that generated information on 37 of the 38 selected indicators. The census and reporting system for routine health service statistics had the largest participating populations and highest total costs. Nationally representative household surveys and demographic surveillance systems (which are not based on nationally representative samples) produced more than half the indicators and used the most rigorous quality assurance. Five systems produced fewer than 13 indicators and had comparatively high costs per participant. CONCLUSION: Policy-makers and programme planners should be aware of the many trade-offs with respect to system costs, coverage, production, representativeness and quality control when making investment choices for monitoring and evaluation. In future, formal cost-effectiveness studies of complementary information systems would help guide investments in the monitoring, evaluation and planning needed to demonstrate the impact of poverty-reduction and health programmes. PMID:16184275

Programmable matter by folding

PubMed Central

Hawkes, E.; An, B.; Benbernou, N. M.; Tanaka, H.; Kim, S.; Demaine, E. D.; Rus, D.; Wood, R. J.

2010-01-01

Programmable matter is a material whose properties can be programmed to achieve specific shapes or stiffnesses upon command. This concept requires constituent elements to interact and rearrange intelligently in order to meet the goal. This paper considers achieving programmable sheets that can form themselves in different shapes autonomously by folding. Past approaches to creating transforming machines have been limited by the small feature sizes, the large number of components, and the associated complexity of communication among the units. We seek to mitigate these difficulties through the unique concept of self-folding origami with universal crease patterns. This approach exploits a single sheet composed of interconnected triangular sections. The sheet is able to fold into a set of predetermined shapes using embedded actuation. To implement this self-folding origami concept, we have developed a scalable end-to-end planning and fabrication process. Given a set of desired objects, the system computes an optimized design for a single sheet and multiple controllers to achieve each of the desired objects. The material, called programmable matter by folding, is an example of a system capable of achieving multiple shapes for multiple functions. PMID:20616049

Programmable matter by folding.

PubMed

Hawkes, E; An, B; Benbernou, N M; Tanaka, H; Kim, S; Demaine, E D; Rus, D; Wood, R J

2010-07-13

Programmable matter is a material whose properties can be programmed to achieve specific shapes or stiffnesses upon command. This concept requires constituent elements to interact and rearrange intelligently in order to meet the goal. This paper considers achieving programmable sheets that can form themselves in different shapes autonomously by folding. Past approaches to creating transforming machines have been limited by the small feature sizes, the large number of components, and the associated complexity of communication among the units. We seek to mitigate these difficulties through the unique concept of self-folding origami with universal crease patterns. This approach exploits a single sheet composed of interconnected triangular sections. The sheet is able to fold into a set of predetermined shapes using embedded actuation. To implement this self-folding origami concept, we have developed a scalable end-to-end planning and fabrication process. Given a set of desired objects, the system computes an optimized design for a single sheet and multiple controllers to achieve each of the desired objects. The material, called programmable matter by folding, is an example of a system capable of achieving multiple shapes for multiple functions.

Infection prevention and control strategies in the era of limited resources and quality improvement: a perspective paper.

PubMed

Vandijck, Dominique; Cleemput, Irina; Hellings, Johan; Vogelaers, Dirk

2013-11-01

This paper aims to describe, using an evidence-based approach, the importance of and the resources necessary for implementing effective infection prevention and control (IPC) programmes. The intrinsic and explicit values of such strategies are presented from a clinical, health-economic and patient safety perspective. Policy makers and hospital managers are committed to providing comprehensive, accessible, and affordable healthcare of high quality. Changes in the healthcare system over time accompanied with variations in demographics and case-mix have considerably affected the availability, quality and ultimately the safety of healthcare. The main goal of an IPC programme is to prevent and control healthcare-associated infections (HAI). Many patient-, healthcare provider-, and organizational factors are associated with an increased risk for acquiring HAIs and may impact both the quality and outcome of patient care. Evidence has been published in support of having an effective IPC programme. It has been estimated that about one-third of HAIs could be prevented if key elements of the evidence-based recommendations for IPC are adequately introduced and followed. However, several healthcare agencies from over the world have reported deficits in the essential resources and components of current IPC programmes. To meet its main goal, staffing, training, and infrastructure requirements are needed. Nevertheless, and given the economic crisis, policy makers and hospital managers may be tempted to not increase or even to reduce the budget as it consumes resources and does not generate sufficient visible revenue. IPC is a critical issue in patient safety, as HAIs are by far the most common complication affecting admitted patients. The significant clinical and health-economic burden HAIs place on the healthcare system speak to the importance of getting introduced effective IPC programmes. Copyright © 2013 Australian College of Critical Care Nurses Ltd. Published by Elsevier Ltd. All rights reserved.

A cost-benefit analysis of peer coaching for overhead lift use in the long-term care sector in Canada.

PubMed

Tompa, Emile; Dolinschi, Roman; Alamgir, Hasanat; Sarnocinska-Hart, Anna; Guzman, Jaime

2016-05-01

To evaluate whether a peer-coaching programme for patient lift use in British Columbia, Canada, was effective and cost-beneficial. We used monthly panel data from 15 long-term care facilities from 2004 to 2011 to estimate the number of patient-handling injuries averted by the peer-coaching programme using a generalised estimating equation model. Facilities that had not yet introduced the programme served as concurrent controls. Accepted lost-time claim counts related to patient handling were the outcome of interest with a denominator of full-time equivalents of nursing staff. A cost-benefit approach was used to estimate the net monetary gains at the system level. The coaching programme was found to be associated with a reduction in the injury rate of 34% during the programme and 56% after the programme concluded with an estimated 62 lost-time injury claims averted. 2 other factors were associated with changes in injury rates: larger facilities had a lower injury rate, and the more care hours per bed the lower the injury rate. We calculated monetary benefits to the system of $748 431 and costs of $894 000 (both in 2006 Canadian dollars) with a benefit-to-cost ratio of 0.84. The benefit-to-cost ratio was -0.05 in the worst case scenario and 2.31 in the best case scenario. The largest cost item was peer coaches' time. A simulation of the programme continuing for 5 years with the same coaching intensity would result in a benefit-to-cost ratio of 0.63. A peer-coaching programme to increase effective use of overhead lifts prevented additional patient-handling injuries but added modest incremental cost to the system. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Note: Digital laser frequency auto-locking for inter-satellite laser ranging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luo, Yingxin; Yeh, Hsien-Chi, E-mail: yexianji@mail.hust.edu.cn; Li, Hongyin

2016-05-15

We present a prototype of a laser frequency auto-locking and re-locking control system designed for laser frequency stabilization in inter-satellite laser ranging system. The controller has been implemented on field programmable gate arrays and programmed with LabVIEW software. The controller allows initial frequency calibrating and lock-in of a free-running laser to a Fabry-Pérot cavity. Since it allows automatic recovery from unlocked conditions, benefit derives to automated in-orbit operations. Program design and experimental results are demonstrated.

A programmable power processor for high power space applications

NASA Technical Reports Server (NTRS)

Lanier, J. R., Jr.; Graves, J. R.; Kapustka, R. E.; Bush, J. R., Jr.

1982-01-01

A Programmable Power Processor (P3) has been developed for application in future large space power systems. The P3 is capable of operation over a wide range of input voltage (26 to 375 Vdc) and output voltage (24 to 180 Vdc). The peak output power capability is 18 kW (180 V at 100 A). The output characteristics of the P3 can be programmed to any voltage and/or current level within the limits of the processor and may be controlled as a function of internal or external parameters. Seven breadboard P3s and one 'flight-type' engineering model P3 have been built and tested both individually and in electrical power systems. The programmable feature allows the P3 to be used in a variety of applications by changing the output characteristics. Test results, including efficiency at various input/output combinations, transient response, and output impedance, are presented.

A report on syphilis control in Turkey

PubMed Central

Christiansen, Sven

1954-01-01

This report presents the results of a six-month survey of the nature and extent of venereal diseases in Turkey which was undertaken by the author, on behalf of WHO, at the request of the Turkish Government. The first part of the report outlines the present venereal-disease-control system and includes descriptions of the work undertaken by public authorities, hospitals and dispensaries, mobile venereal-disease-control teams, and laboratories; in the second part, the author enumerates certain recommendations for the intensification of the current control programme. These recommendations are particularly concerned with the control of syphilis (since the incidence of other venereal diseases in Turkey is of very secondary importance), and with the expansion, standardization, and co-ordination of serodiagnostic facilities and services. It is suggested that there might be a gradual intensification and reorientation of the present programme. A proposed plan of operations for an eight-year period is described. PMID:13182590

Self-Calibrating and Remote Programmable Signal Conditioning Amplifier System and Method

NASA Technical Reports Server (NTRS)

Medelius, Pedro J. (Inventor); Hallberg, Carl G. (Inventor); Simpson, Howard J., III (Inventor); Thayer, Stephen W. (Inventor)

1998-01-01

A self-calibrating, remote programmable signal conditioning amplifier system employs information read from a memory attached to a measurement transducer for automatic calibration. The signal conditioning amplifier is self-calibrated on a continuous basis through use of a dual input path arrangement, with each path containing a multiplexer and a programmable amplifier. A digital signal processor controls operation of the system such that a transducer signal is applied to one of the input paths, while one or more calibration signals are applied to the second input path. Once the second path is calibrated, the digital signal processor switches the transducer signal to the second path. and then calibrates the first path. This process is continually repeated so that each path is calibrated on an essentially continuous basis. Dual output paths are also employed which are calibrated in the same manner. The digital signal processor also allows the implementation of a variety of digital filters which are either programmed into the system or downloaded by an operator, and performs up to eighth order linearization.

Integrated vector management for malaria control

PubMed Central

Beier, John C; Keating, Joseph; Githure, John I; Macdonald, Michael B; Impoinvil, Daniel E; Novak, Robert J

2008-01-01

Integrated vector management (IVM) is defined as "a rational decision-making process for the optimal use of resources for vector control" and includes five key elements: 1) evidence-based decision-making, 2) integrated approaches 3), collaboration within the health sector and with other sectors, 4) advocacy, social mobilization, and legislation, and 5) capacity-building. In 2004, the WHO adopted IVM globally for the control of all vector-borne diseases. Important recent progress has been made in developing and promoting IVM for national malaria control programmes in Africa at a time when successful malaria control programmes are scaling-up with insecticide-treated nets (ITN) and/or indoor residual spraying (IRS) coverage. While interventions using only ITNs and/or IRS successfully reduce transmission intensity and the burden of malaria in many situations, it is not clear if these interventions alone will achieve those critical low levels that result in malaria elimination. Despite the successful employment of comprehensive integrated malaria control programmes, further strengthening of vector control components through IVM is relevant, especially during the "end-game" where control is successful and further efforts are required to go from low transmission situations to sustained local and country-wide malaria elimination. To meet this need and to ensure sustainability of control efforts, malaria control programmes should strengthen their capacity to use data for decision-making with respect to evaluation of current vector control programmes, employment of additional vector control tools in conjunction with ITN/IRS tactics, case-detection and treatment strategies, and determine how much and what types of vector control and interdisciplinary input are required to achieve malaria elimination. Similarly, on a global scale, there is a need for continued research to identify and evaluate new tools for vector control that can be integrated with existing biomedical strategies within national malaria control programmes. This review provides an overview of how IVM programmes are being implemented, and provides recommendations for further development of IVM to meet the goals of national malaria control programmes in Africa. PMID:19091038

Research support for effective state and community tobacco control programme response to electronic nicotine delivery systems.

PubMed

Schmitt, Carol L; Lee, Youn Ok; Curry, Laurel E; Farrelly, Matthew C; Rogers, Todd

2014-07-01

To identify unmet research needs of state and community tobacco control practitioners pertaining to electronic nicotine delivery systems (ENDS or e-cigarettes) that would inform policy and practice efforts at the state and community levels, and to describe ENDS-related research and dissemination activities of the National Cancer Institute-funded State and Community Tobacco Control Research Initiative. To determine specific research gaps relevant to state and community tobacco control practice, we analysed survey data collected from tobacco control programmes (TCPs) in all 50 U.S. states and the District of Columbia (N=51). Survey items covered a range of ENDS issues: direct harm to users, harm of secondhand vapour, cessation, flavours, constituents and youth access. There is no ENDS topic on which a majority of state TCP managers feel very informed. They feel least informed about harms of secondhand vapour while also reporting that this information is among the most important for their programme. A majority (N=31) of respondents indicated needs for research on the implications of ENDS products for existing policies. TCP managers report that ENDS research is highly important for practice and need research-based information to inform decision making around the inclusion of ENDS in existing tobacco control policies. For optimal relevance to state and community TCPs, research on ENDS should prioritise study of the health effects of ENDS use and secondhand exposure to ENDS vapour in the context of existing tobacco control policies. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Compiling probabilistic, bio-inspired circuits on a field programmable analog array

PubMed Central

Marr, Bo; Hasler, Jennifer

2014-01-01

A field programmable analog array (FPAA) is presented as an energy and computational efficiency engine: a mixed mode processor for which functions can be compiled at significantly less energy costs using probabilistic computing circuits. More specifically, it will be shown that the core computation of any dynamical system can be computed on the FPAA at significantly less energy per operation than a digital implementation. A stochastic system that is dynamically controllable via voltage controlled amplifier and comparator thresholds is implemented, which computes Bernoulli random variables. From Bernoulli variables it is shown exponentially distributed random variables, and random variables of an arbitrary distribution can be computed. The Gillespie algorithm is simulated to show the utility of this system by calculating the trajectory of a biological system computed stochastically with this probabilistic hardware where over a 127X performance improvement over current software approaches is shown. The relevance of this approach is extended to any dynamical system. The initial circuits and ideas for this work were generated at the 2008 Telluride Neuromorphic Workshop. PMID:24847199

Development of an automatic subsea blowout preventer stack control system using PLC based SCADA.

PubMed

Cai, Baoping; Liu, Yonghong; Liu, Zengkai; Wang, Fei; Tian, Xiaojie; Zhang, Yanzhen

2012-01-01

An extremely reliable remote control system for subsea blowout preventer stack is developed based on the off-the-shelf triple modular redundancy system. To meet a high reliability requirement, various redundancy techniques such as controller redundancy, bus redundancy and network redundancy are used to design the system hardware architecture. The control logic, human-machine interface graphical design and redundant databases are developed by using the off-the-shelf software. A series of experiments were performed in laboratory to test the subsea blowout preventer stack control system. The results showed that the tested subsea blowout preventer functions could be executed successfully. For the faults of programmable logic controllers, discrete input groups and analog input groups, the control system could give correct alarms in the human-machine interface. Copyright © 2011 ISA. Published by Elsevier Ltd. All rights reserved.

Digital controls for gas turbine engines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, K.

1987-01-01

This paper begins by first describing the simplistic requirements of a gas turbine engine; how these requirements are best satisfied, frequently with the aid of electronic control systems; what the trade-off between integrity and reliability means; and finally, but forming a major section, this paper describes in qualitative detail a few of the current programmes for Full Authority Digital Engine Controls (FADEC).

Advanced earth observation spacecraft computer-aided design software: Technical, user and programmer guide

NASA Technical Reports Server (NTRS)

Farrell, C. E.; Krauze, L. D.

1983-01-01

The IDEAS computer of NASA is a tool for interactive preliminary design and analysis of LSS (Large Space System). Nine analysis modules were either modified or created. These modules include the capabilities of automatic model generation, model mass properties calculation, model area calculation, nonkinematic deployment modeling, rigid-body controls analysis, RF performance prediction, subsystem properties definition, and EOS science sensor selection. For each module, a section is provided that contains technical information, user instructions, and programmer documentation.

Chinese Journal of Lasers (Selected Articles),

DTIC Science & Technology

1986-04-22

properties We first investigated silicate based glasses, then the other inorganic glasses such as borate, phosphate, germanate. tellurate ...of the growth of high melting temperature I.~ oxides, several upward pulling single crystal furnaces with nigh precision mechanical movement and high...automatic electronic weighting systems, and programmable automatic movement correction systems. The reliability of most of these control systems

Programmable Logic Controllers. Teacher Edition.

ERIC Educational Resources Information Center

Rauh, Bob; Kaltwasser, Stan

These materials were developed for a seven-unit secondary or postsecondary education course on programmable logic controllers (PLCs) that treats most of the skills needed to work effectively with PLCs as programming skills. The seven units of the course cover the following topics: fundamentals of programmable logic controllers; contracts, timers,…

An inexpensive programmable illumination microscope with active feedback.

PubMed

Tompkins, Nathan; Fraden, Seth

2016-02-01

We have developed a programmable illumination system capable of tracking and illuminating numerous objects simultaneously using only low-cost and reused optical components. The active feedback control software allows for a closed-loop system that tracks and perturbs objects of interest automatically. Our system uses a static stage where the objects of interest are tracked computationally as they move across the field of view allowing for a large number of simultaneous experiments. An algorithmically determined illumination pattern can be applied anywhere in the field of view with simultaneous imaging and perturbation using different colors of light to enable spatially and temporally structured illumination. Our system consists of a consumer projector, camera, 35-mm camera lens, and a small number of other optical and scaffolding components. The entire apparatus can be assembled for under $4,000.

The effect of an active implementation of a disease management programme for chronic obstructive pulmonary disease on healthcare utilization - a cluster-randomised controlled trial

PubMed Central

2013-01-01

Background The growing population living with chronic conditions calls for efficient healthcare-planning and effective care. Implementing disease-management-programmes is one option for responding to this demand. Knowledge is scarce about the effect of implementation processes and their effect on patients; only few studies have reported the effectiveness of disease-management-programmes targeting patients with chronic obstructive pulmonary disease (COPD). The objective of this paper was to determine the effect on healthcare-utilization of an active implementation model for a disease-management-programme for patients with one of the major multimorbidity diseases, COPD. Methods The standard implementation of a new disease-management-programme for COPD was ongoing during the study-period from November 2008 to November 2010 in the Central Denmark Region. We wanted to test a strategy using Breakthrough Series, academic detailing and lists of patients with COPD. It targeted GPs and three hospitals serving approx. 60,000 inhabitants aged 35 or older and included interventions directed at professionals, organisations and patients. The study was a non-blinded block- and cluster-randomised controlled trial with GP-practices as the unit of randomisation. In Ringkoebing-Skjern Municipality, Denmark, 16 GP-practices involving 38 GPs were randomised to either the intervention-group or the control-group. A comparable neighbouring municipality acted as an external-control-group which included nine GP-practices with 25 GPs. An algorithm based on health-registry-data on lung-related contacts to the healthcare-system identified 2,736 patients who were alive at the end of the study-period. The population included in this study counted 1,372 (69.2%) patients who responded to the baseline questionnaire and confirmed their COPD diagnosis; 458 (33.4%) patients were from the intervention-group, 376 (27.4%) from the control-group and 538(39.2%) from the external-control-group. The primary outcome was adherence to the disease-management-programme measured at patient-level by use of specific services from general practice. Secondary outcomes were use of out-of-hours-services, outpatient-clinic, and emergency-department and hospital-admissions. Results The intervention practices provided more planned preventive consultations, additional preventive consultations and spirometries than non-intervention practices. A comparison of the development in the intervention practices with the development in the control-practices showed that the intervention resulted in more planned preventive-consultations, fewer conventional consultations and fewer patients admitted without a lung-related-diagnosis. Conclusions Use of the active implementation model for the disease-management-programme for COPD changed the healthcare utilization in accordance with the programme. Trial registration Clinicaltrials.gov identifier: NCT01228708. PMID:24090189

The effect of an active implementation of a disease management programme for chronic obstructive pulmonary disease on healthcare utilization--a cluster-randomised controlled trial.

PubMed

Smidth, Margrethe; Christensen, Morten Bondo; Fenger-Grøn, Morten; Olesen, Frede; Vedsted, Peter

2013-10-03

The growing population living with chronic conditions calls for efficient healthcare-planning and effective care. Implementing disease-management-programmes is one option for responding to this demand. Knowledge is scarce about the effect of implementation processes and their effect on patients; only few studies have reported the effectiveness of disease-management-programmes targeting patients with chronic obstructive pulmonary disease (COPD). The objective of this paper was to determine the effect on healthcare-utilization of an active implementation model for a disease-management-programme for patients with one of the major multimorbidity diseases, COPD. The standard implementation of a new disease-management-programme for COPD was ongoing during the study-period from November 2008 to November 2010 in the Central Denmark Region. We wanted to test a strategy using Breakthrough Series, academic detailing and lists of patients with COPD. It targeted GPs and three hospitals serving approx. 60,000 inhabitants aged 35 or older and included interventions directed at professionals, organisations and patients. The study was a non-blinded block- and cluster-randomised controlled trial with GP-practices as the unit of randomisation. In Ringkoebing-Skjern Municipality, Denmark, 16 GP-practices involving 38 GPs were randomised to either the intervention-group or the control-group. A comparable neighbouring municipality acted as an external-control-group which included nine GP-practices with 25 GPs. An algorithm based on health-registry-data on lung-related contacts to the healthcare-system identified 2,736 patients who were alive at the end of the study-period. The population included in this study counted 1,372 (69.2%) patients who responded to the baseline questionnaire and confirmed their COPD diagnosis; 458 (33.4%) patients were from the intervention-group, 376 (27.4%) from the control-group and 538(39.2%) from the external-control-group. The primary outcome was adherence to the disease-management-programme measured at patient-level by use of specific services from general practice. Secondary outcomes were use of out-of-hours-services, outpatient-clinic, and emergency-department and hospital-admissions. The intervention practices provided more planned preventive consultations, additional preventive consultations and spirometries than non-intervention practices. A comparison of the development in the intervention practices with the development in the control-practices showed that the intervention resulted in more planned preventive-consultations, fewer conventional consultations and fewer patients admitted without a lung-related-diagnosis. Use of the active implementation model for the disease-management-programme for COPD changed the healthcare utilization in accordance with the programme. Clinicaltrials.gov identifier: NCT01228708.

The research agenda for improving health policy, systems performance, and service delivery for tuberculosis control: a WHO perspective.

PubMed Central

Nunn, Paul; Harries, Anthony; Godfrey-Faussett, Peter; Gupta, Raj; Maher, Dermot; Raviglione, Mario

2002-01-01

The development of WHO's DOTS strategy for the control of tuberculosis (TB) in 1995 led to the expansion, adaptation and improvement of operational research in this area. From being a patchwork of small-scale studies concerned with aspects of service delivery, TB operational research shifted to larger-scale, often multicountry projects that were also concerned with health policy and the needs of health systems. The results are now being put into practice by national TB control programmes. In 1998 an ad hoc committee identified the chief factors inhibiting the expansion of DOTS: lack of political will and commitment, poor financial support for TB control, poor organization and management of health services, inadequate human resources, irregular drug supplies, the HIV epidemic, and the rise of multidrug resistance. An analysis of current operational research on TB is presented on the basis of these constraints, and examples of successful projects are outlined in the article. We discuss the prerequisites for success, the shortcomings of this WHO- supported programme, and future challenges and needs. PMID:12132005

Telescope Array Control System Based on Wireless Touch Screen Platform

NASA Astrophysics Data System (ADS)

Fu, Xia-nan; Huang, Lei; Wei, Jian-yan

2017-10-01

Ground-based Wide Angle Cameras (GMAC) are the ground-based observational facility for the SVOM (Space Variable Object Monitor) astronomical satellite of Sino-French cooperation, and Mini-GWAC is the pathfinder and supplement of GWAC. In the context of the Mini-GWAC telescope array, this paper introduces the design and implementation of a kind of telescope array control system based on the wireless touch screen platform. We describe the development and implementation of the system in detail in terms of control system principle, system hardware structure, software design, experiment, and test etc. The system uses a touch-control PC which is based on the Windows CE system as the upper computer, while the wireless transceiver module and PLC (Programmable Logic Controller) are taken as the system kernel. It has the advantages of low cost, reliable data transmission, and simple operation. And the control system has been applied to the Mini-GWAC successfully.

State variation in retail promotions and advertising for Marlboro cigarettes

PubMed Central

Slater, S.; Chaloupka, F.; Wakefield, M.

2001-01-01

BACKGROUND—There is some evidence that tobacco companies marketing efforts undermine the effects of comprehensive tobacco control programmes.
OBJECTIVE—To determine whether point-of-purchase advertising and promotions are more pervasive in states where comprehensive tobacco control programmes are underway.
DESIGN—Cross sectional survey using 1996 data, with merged records of the existence of local tobacco advertising restrictions.
PARTICIPANTS AND SETTING—581 tobacco retail stores located in close proximity to high schools in mainland USA.
MAIN OUTCOME MEASURES—Existence of gift-with-purchase, number of interior advertisements, and exterior store advertisements for Marlboro cigarettes.
RESULTS—After controlling for store type and existence of advertising restrictions, offer of a gift-with-purchase for Marlboro cigarettes was significantly more likely in states with comprehensive tobacco control programmes than those without programmes (odds ratio 2.59, 95% confidence interval 1.57 to 4.26). Although not significant, results show an increase in the number of interior and exterior store advertisements for stores located in states with a comprehensive tobacco control programme than those in other states.
CONCLUSION—Results suggest some point-of-purchase tobacco promotions and advertising are more pervasive in states with comprehensive tobacco control programmes. These efforts are likely to act against the objectives of programmes and need to be accounted for in programme evaluations.


Keywords: advertising; public policy; value added promotions PMID:11740024

Controller and data acquisition system for SIDECAR ASIC driven HAWAII detectors

NASA Astrophysics Data System (ADS)

Ramaprakash, Anamparambu; Burse, Mahesh; Chordia, Pravin; Chillal, Kalpesh; Kohok, Abhay; Mestry, Vilas; Punnadi, Sujit; Sinha, Sakya

2010-07-01

SIDECAR is an Application Specific Integrated Circuit (ASIC), which can be used for control and data acquisition from near-IR HAWAII detectors offered by Teledyne Imaging Sensors (TIS), USA. The standard interfaces provided by Teledyne are COM API and socket servers running under MS Windows platform. These interfaces communicate to the ASIC (and the detector) through an intermediate card called JWST ASIC Drive Electronics (JADE2). As part of an ongoing programme of several years, for developing astronomical focal plane array (CCDs, CMOS and Hybrid) controllers and data acquisition systems (CDAQs), IUCAA is currently developing the next generation controllers employing Virtex-5 family FPGA devices. We present here the capabilities which are built into these new CDAQs for handling HAWAII detectors. In our system, the computer which hosts the application programme, user interface and device drivers runs on a Linux platform. It communicates through a hot-pluggable USB interface (with an optional optical fibre extender) to the FPGA-based card which replaces the JADE2. The FPGA board in turn, controls the SIDECAR ASIC and through it a HAWAII-2RG detector, both of which are located in a cryogenic test Dewar set up which is liquid nitrogen cooled. The system can acquire data over 1, 4, or 32 readout channels, with or without binning, at different speeds, can define sub-regions for readout, offers various readout schemes like Fowler sampling, up-theramp etc. In this paper, we present the performance results obtained from a prototype system.

Biosurveillance Technology: Providing Situational Awareness through Increased Information Sharing

DTIC Science & Technology

2011-09-01

Sri Lanka, there are “separate vertical programmes [sic] to control and monitor malaria , filariasis, leprosy, respiratory diseases, human rabies...Biohazard Detection System CAP Common Alerting Protocol CDC Centers for Disease Control and Prevention CDC HAN Centers for Disease Control and Prevention...LCDHD Preparedness Program running, I always had complete and total faith that you had everything under control and you would excel at every task. To

Effectiveness of the ACA (Availability, Current issues and Anticipation) training programme on GP-patient communication in palliative care; a controlled trial

PubMed Central

2013-01-01

Background Communicating effectively with palliative care patients has been acknowledged to be somewhat difficult, but little is known about the effect that training general practitioners (GPs) in specific elements of communication in palliative care might have. We hypothesized that GPs exposed to a new training programme in GP-patient communication in palliative care focusing on availability of the GP for the patient, current issues the GP should discuss with the patient and anticipation by the GP of various scenarios (ACA), would discuss more issues and become more skilled in their communication with palliative care patients. Methods In this controlled trial among GPs who attended a two-year Palliative Care Peer Group Training Course in the Netherlands only intervention GPs received the ACA training programme. To evaluate the effect of the programme a content analysis (Roter Interaction Analysis System) was performed of one videotaped 15-minute consultation of each GP with a simulated palliative care patient conducted at baseline, and one at 12 months follow-up. Both how the GP communicated with the patient (‘availability’) and the number of current and anticipated issues the GP discussed with the patient were measured quantitatively. We used linear mixed models and logistic regression models to evaluate between-group differences over time. Results Sixty-two GPs were assigned to the intervention and 64 to the control group. We found no effect of the ACA training programme on how the GPs communicated with the patient or on the number of issues discussed by GPs with the patient. The total number of issues discussed by the GPs was eight out of 13 before and after the training in both groups. Conclusion The ACA training programme did not influence how the GPs communicated with the simulated palliative care patient or the number of issues discussed by the GPs in this trial. Further research should evaluate whether this training programme is effective for GPs who do not have a special interest in palliative care and whether studies using outcomes at patient level can provide more insight into the effectiveness of the ACA training programme. Trial registration Current Controlled Trials ISRCTN56722368 PMID:23819723

Delivery of antiretroviral treatment services in India: Estimated costs incurred under the National AIDS Control Programme.

PubMed

Agarwal, Reshu; Rewari, Bharat Bhushan; Shastri, Suresh; Nagaraja, Sharath Burugina; Rathore, Abhilakh Singh

2017-04-01

Competing domestic health priorities and shrinking financial support from external agencies necessitates that India's National AIDS Control Programme (NACP) brings in cost efficiencies to sustain the programme. In addition, current plans to expand the criteria for eligibility for antiretroviral therapy (ART) in India will have significant financial implications in the near future. ART centres in India provide comprehensive services to people living with HIV (PLHIV): those fulfilling national eligibility criteria and receiving ART and those on pre-ART care, i.e. not on ART. ART centres are financially supported (i) directly by the NACP; and (ii) indirectly by general health systems. This study was conducted to determine (i) the cost incurred per patient per year of pre-ART and ART services at ART centres; and (ii) the proportion of this cost incurred by the NACP and by general health systems. The study used national data from April 2013 to March 2014, on ART costs and non-ART costs (human resources, laboratory tests, training, prophylaxis and management of opportunistic infections, hospitalization, operational, and programme management). Data were extracted from procurement records and reports, statements of expenditure at national and state level, records and reports from ART centres, databases of the National AIDS Control Organisation, and reports on use of antiretroviral drugs. The analysis estimates the cost for ART services as US$ 133.89 (?8032) per patient per year, of which 66% (US$ 88.66, ?5320) is for antiretroviral drugs and 34% (US$ 45.23, ?2712) is for non-ART recurrent expenditure, while the cost for pre-ART care is US$ 33.05 (?1983) per patient per year. The low costs incurred for patients in ART and pre-ART care services can be attributed mainly to the low costs of generic drugs. However, further integration with general health systems may facilitate additional cost saving, such as in human resources.

An organized approach to the control of hazards to health at work.

PubMed

Molyneux, M K; Wilson, H G

1990-04-01

Shell U.K. has an approach which facilitates the implementation of its occupational hygiene programme in its many locations. The main elements of the system are Company Policy, Standards, Methods and Management. The Policy sets the scene and is rigorous in its aims. The new COSHH legislation has emphasized particular duties which have influenced the approach. The Company Occupational Health Guidelines [Guidelines on Health at Work for Shell in the U.K. Shell U.K. Ltd, London (1989)] set the standards for control of exposure, among other things, and the Company adopts appropriate methods to achieve them. Of particular note is the Company's COSHH Programme [Implementation of the Shell U.K. Policy on the Control of Substances Hazardous to Health. Shell U.K. Ltd, London (1989)] which applies to all hazards to health (including physical and biological agents) in the workplace. Its introduction has been given full corporate support and is in the process of implementation. Appropriate procedures have been introduced for assessments of risk and for work histories. Guidance has been given on competence, reflecting a philosphy based on a team approach using local resources to the full, supported by corporate resources as required. The awards of the British Examining and Registration Board in Occupational Hygiene (1987) are used as the professional standard. Because of difficulties in obtaining basic hazard data, an internal core hazard data system (CHADS) [Core Hazard Data System. Shell U.K Ltd, London (1989)] has been introduced. The whole programme is managed through Occupational Hygiene Focal Points (OHFP) which represent local activities but also participate in corporate strategy. Through them the multidisciplinary approach is promoted, working in conjunction with local and sector Medical Advisers. Work done by the central Occupational Hygiene Unit is recorded and the reports are used for time management and recovery of costs. In its entirety, the approach is being used successfully to implement a comprehensive occupational hygiene programme in a diversified and dispersed industrial organization.

General-Purpose Serial Interface For Remote Control

NASA Technical Reports Server (NTRS)

Busquets, Anthony M.; Gupton, Lawrence E.

1990-01-01

Computer controls remote television camera. General-purpose controller developed to serve as interface between host computer and pan/tilt/zoom/focus functions on series of automated video cameras. Interface port based on 8251 programmable communications-interface circuit configured for tristated outputs, and connects controller system to any host computer with RS-232 input/output (I/O) port. Accepts byte-coded data from host, compares them with prestored codes in read-only memory (ROM), and closes or opens appropriate switches. Six output ports control opening and closing of as many as 48 switches. Operator controls remote television camera by speaking commands, in system including general-purpose controller.

Assessing Lymphatic Filariasis Data Quality in Endemic Communities in Ghana, Using the Neglected Tropical Diseases Data Quality Assessment Tool for Preventive Chemotherapy.

PubMed

de Souza, Dziedzom K; Yirenkyi, Eric; Otchere, Joseph; Biritwum, Nana-Kwadwo; Ameme, Donne K; Sackey, Samuel; Ahorlu, Collins; Wilson, Michael D

2016-03-01

The activities of the Global Programme for the Elimination of Lymphatic Filariasis have been in operation since the year 2000, with Mass Drug Administration (MDA) undertaken yearly in disease endemic communities. Information collected during MDA-such as population demographics, age, sex, drugs used and remaining, and therapeutic and geographic coverage-can be used to assess the quality of the data reported. To assist country programmes in evaluating the information reported, the WHO, in collaboration with NTD partners, including ENVISION/RTI, developed an NTD Data Quality Assessment (DQA) tool, for use by programmes. This study was undertaken to evaluate the tool and assess the quality of data reported in some endemic communities in Ghana. A cross sectional study, involving review of data registers and interview of drug distributors, disease control officers, and health information officers using the NTD DQA tool, was carried out in selected communities in three LF endemic Districts in Ghana. Data registers for service delivery points were obtained from District health office for assessment. The assessment verified reported results in comparison with recounted values for five indicators: number of tablets received, number of tablets used, number of tablets remaining, MDA coverage, and population treated. Furthermore, drug distributors, disease control officers, and health information officers (at the first data aggregation level), were interviewed, using the DQA tool, to determine the performance of the functional areas of the data management system. The results showed that over 60% of the data reported were inaccurate, and exposed the challenges and limitations of the data management system. The DQA tool is a very useful monitoring and evaluation (M&E) tool that can be used to elucidate and address data quality issues in various NTD control programmes.

A VxD-based automatic blending system using multithreaded programming.

PubMed

Wang, L; Jiang, X; Chen, Y; Tan, K C

2004-01-01

This paper discusses the object-oriented software design for an automatic blending system. By combining the advantages of a programmable logic controller (PLC) and an industrial control PC (ICPC), an automatic blending control system is developed for a chemical plant. The system structure and multithread-based communication approach are first presented in this paper. The overall software design issues, such as system requirements and functionalities, are then discussed in detail. Furthermore, by replacing the conventional dynamic link library (DLL) with virtual X device drivers (VxD's), a practical and cost-effective solution is provided to improve the robustness of the Windows platform-based automatic blending system in small- and medium-sized plants.

Automated Water-Purification System

NASA Technical Reports Server (NTRS)

Ahlstrom, Harlow G.; Hames, Peter S.; Menninger, Fredrick J.

1988-01-01

Reverse-osmosis system operates and maintains itself with minimal human attention, using programmable controller. In purifier, membranes surround hollow cores through which clean product water flows out of reverse-osmosis unit. No chemical reactions or phase changes involved. Reject water, in which dissolved solids concentrated, emerges from outer membrane material on same side water entered. Flow controls maintain ratio of 50 percent product water and 50 percent reject water. Membranes expected to last from 3 to 15 years.

Telescope Array Control System Based on Wireless Touch Screen Platform

NASA Astrophysics Data System (ADS)

Fu, X. N.; Huang, L.; Wei, J. Y.

2016-07-01

GWAC (Ground-based Wide Angle Cameras) are the ground-based observational instruments of the Sino-French cooperation SVOM (Space Variable Objects Monitor) astronomical satellite, and Mini-GWAC is a pathfinder and supplement of GWAC. In the context of the Mini-GWAC telescope array, this paper introduces the design and implementation of a kind of telescope array control system, which is based on wireless serial interface module to communicate. We describe the development and implementation of the system in detail in terms of control system principle, system hardware structure, software design, experiment, and test. The system uses the touch-control PC which is based on the Windows CE system as the upper-computer, the wireless transceiver module and PLC (Programmable Logic Controller) as the core. It has the advantages of low cost, reliable data transmission, and simple operation. So far, the control system has been applied to Mini-GWAC successfully.

Self-shaping composites with programmable bioinspired microstructures.

PubMed

Erb, Randall M; Sander, Jonathan S; Grisch, Roman; Studart, André R

2013-01-01

Shape change is a prevalent function apparent in a diverse set of natural structures, including seed dispersal units, climbing plants and carnivorous plants. Many of these natural materials change shape by using cellulose microfibrils at specific orientations to anisotropically restrict the swelling/shrinkage of their organic matrices upon external stimuli. This is in contrast to the material-specific mechanisms found in synthetic shape-memory systems. Here we propose a robust and universal method to replicate this unusual shape-changing mechanism of natural systems in artificial bioinspired composites. The technique is based upon the remote control of the orientation of reinforcing inorganic particles within the composite using a weak external magnetic field. Combining this reinforcement orientational control with swellable/shrinkable polymer matrices enables the creation of composites whose shape change can be programmed into the material's microstructure rather than externally imposed. Such bioinspired approach can generate composites with unusual reversibility, twisting effects and site-specific programmable shape changes.

Self-shaping composites with programmable bioinspired microstructures

NASA Astrophysics Data System (ADS)

Erb, Randall M.; Sander, Jonathan S.; Grisch, Roman; Studart, André R.

2013-04-01

Shape change is a prevalent function apparent in a diverse set of natural structures, including seed dispersal units, climbing plants and carnivorous plants. Many of these natural materials change shape by using cellulose microfibrils at specific orientations to anisotropically restrict the swelling/shrinkage of their organic matrices upon external stimuli. This is in contrast to the material-specific mechanisms found in synthetic shape-memory systems. Here we propose a robust and universal method to replicate this unusual shape-changing mechanism of natural systems in artificial bioinspired composites. The technique is based upon the remote control of the orientation of reinforcing inorganic particles within the composite using a weak external magnetic field. Combining this reinforcement orientational control with swellable/shrinkable polymer matrices enables the creation of composites whose shape change can be programmed into the material’s microstructure rather than externally imposed. Such bioinspired approach can generate composites with unusual reversibility, twisting effects and site-specific programmable shape changes.

Controller and interface module for the High-Speed Data Acquisition System correlator/accumulator

NASA Technical Reports Server (NTRS)

Brokl, S. S.

1985-01-01

One complex channel of the High-Speed Data Acquisition System (a subsystem used in the Goldstone solar system radar), consisting of two correlator modules and one accumulator module, is operated by the controller and interface module interfaces are provided to the VAX UNIBUS for computer control, monitor, and test of the controller and correlator/accumulator. The correlator and accumulator modules controlled by this module are the key digital signal processing elements of the Goldstone High-Speed Data Acquisition System. This fully programmable unit provides for a wide variety of correlation and filtering functions operating on a three megaword/second data flow. Data flow is to the VAX by way of the I/O port of a FPS 5210 array processor.

Community participation in disease control.

PubMed

Bermejo, A; Bekui, A

1993-05-01

The main determinants of community participation in disease control programmes are identified and a framework with eleven variables is developed. Attention is drawn to the political background, community characteristics, the managerial capacity of the provider and the epidemiology of the disease. The framework is designed to guide health professionals in the systematic assessment and monitoring of participation in disease control programmes. Analysis of the Ghanaian Guinea Worm Eradication Programme and the Nicaraguan Tuberculosis Control Programme are presented as case studies. They show that political support does not guarantee community participation in disease control programmes and stress the importance of other determinants such as commitment to PHC, intersectoral coordination, the project approach and human resources. The relevance of the epidemiology of the disease in determining what degree of community participation will be most effective is highlighted by the case studies.

Costs of dengue prevention and incremental cost of dengue outbreak control in Guantanamo, Cuba.

PubMed

Baly, Alberto; Toledo, Maria E; Rodriguez, Karina; Benitez, Juan R; Rodriguez, Maritza; Boelaert, Marleen; Vanlerberghe, Veerle; Van der Stuyft, Patrick

2012-01-01

To assess the economic cost of routine Aedes aegypti control in an at-risk environment without dengue endemicity and the incremental costs incurred during a sporadic outbreak. The study was conducted in 2006 in the city of Guantanamo, Cuba. We took a societal perspective to calculate costs in months without dengue transmission (January-July) and during an outbreak (August-December). Data sources were bookkeeping records, direct observations and interviews. The total economic cost per inhabitant (p.i.) per month. (p.m.) increased from 2.76 USD in months without dengue transmission to 6.05 USD during an outbreak. In months without transmission, the routine Aedes control programme cost 1.67 USD p.i. p.m. Incremental costs during the outbreak were mainly incurred by the population and the primary/secondary level of the healthcare system, hardly by the vector control programme (1.64, 1.44 and 0.21 UDS increment p.i. p.m., respectively). The total cost for managing a hospitalized suspected dengue case was 296.60 USD (62.0% direct medical, 9.0% direct non-medical and 29.0% indirect costs). In both periods, the main cost drivers for the Aedes control programme, the healthcare system and the community were the value of personnel and volunteer time or productivity losses. Intensive efforts to keep A. aegypti infestation low entail important economic costs for society. When a dengue outbreak does occur eventually, costs increase sharply. In-depth studies should assess which mix of activities and actors could maximize the effectiveness and cost-effectiveness of routine Aedes control and dengue prevention. © 2011 Blackwell Publishing Ltd.

Design of a Closed-Loop, Bidirectional Brain Machine Interface System With Energy Efficient Neural Feature Extraction and PID Control.

PubMed

Liu, Xilin; Zhang, Milin; Richardson, Andrew G; Lucas, Timothy H; Van der Spiegel, Jan

2017-08-01

This paper presents a bidirectional brain machine interface (BMI) microsystem designed for closed-loop neuroscience research, especially experiments in freely behaving animals. The system-on-chip (SoC) consists of 16-channel neural recording front-ends, neural feature extraction units, 16-channel programmable neural stimulator back-ends, in-channel programmable closed-loop controllers, global analog-digital converters (ADC), and peripheral circuits. The proposed neural feature extraction units includes 1) an ultra low-power neural energy extraction unit enabling a 64-step natural logarithmic domain frequency tuning, and 2) a current-mode action potential (AP) detection unit with time-amplitude window discriminator. A programmable proportional-integral-derivative (PID) controller has been integrated in each channel enabling a various of closed-loop operations. The implemented ADCs include a 10-bit voltage-mode successive approximation register (SAR) ADC for the digitization of the neural feature outputs and/or local field potential (LFP) outputs, and an 8-bit current-mode SAR ADC for the digitization of the action potential outputs. The multi-mode stimulator can be programmed to perform monopolar or bipolar, symmetrical or asymmetrical charge balanced stimulation with a maximum current of 4 mA in an arbitrary channel configuration. The chip has been fabricated in 0.18 μ m CMOS technology, occupying a silicon area of 3.7 mm 2 . The chip dissipates 56 μW/ch on average. General purpose low-power microcontroller with Bluetooth module are integrated in the system to provide wireless link and SoC configuration. Methods, circuit techniques and system topology proposed in this work can be used in a wide range of relevant neurophysiology research, especially closed-loop BMI experiments.

A telerobotic digital controller system

NASA Technical Reports Server (NTRS)

Brown, Richard J.

1992-01-01

This system is a network of joint mounted dual axes digital servo-controllers (DDSC), providing control of various joints and end effectors of different robotic systems. This report provides description of and user required information for the Digital Controller System Network (DSCN) and, in particular, the DDSC, Model DDSC-2, developed to perform the controller functions. The DDSC can control 3 phase brushless or brush type DC motors, requiring up to 8 amps. Only four wires, two for power and 2 for serial communication, are required, except for local sensor and motor connections. This highly capable, very flexible, programmable servo-controller, contained on a single, compact printed circuit board measuring only 4.5 x 5.1 inches, is applicable to control systems of all types from sub-arc second precision pointing to control of robotic joints and end effectors. This document concentrates on the robotic applications for the DDSC.

Monitoring grasshopper and locust habitats in Sahelian Africa using GIS and remote sensing technology

USGS Publications Warehouse

Tappan, G. Gray; Moore, Donald G.; Knauseberger, Walter I.

1991-01-01

Development programmes in Sahelian Africa are beginning to use geographic information system (GIS) technology. One of the GIS and remote sensing programmes introduced to the region in the late 1980s was the use of seasonal vegetation maps made from satellite data to support grasshopper and locust control. Following serious outbreaks of these pests in 1987, the programme addressed a critical need, by national and international crop protection organizations, to monitor site-specific dynamic vegetation conditions associated with grasshopper and locust breeding. The primary products used in assessing vegetation conditions were vegetation index (greenness) image maps derived from National Oceanic and Atmospheric Administration satellite imagery. Vegetation index data were integrated in a GIS with digital cartographic data of individual Sahelian countries. These near-real-time image maps were used regularly in 10 countries for locating potential grasshopper and locust habitats. The programme to monitor vegetation conditions is currently being institutionalized in the Sahel.

TB/HIV Co-Infection Care in Conflict-Affected Settings: A Mapping of Health Facilities in the Goma Area, Democratic Republic of Congo

PubMed Central

Kaboru, Berthollet Bwira; Ogwang, Brenda. A.; Namegabe, Edmond Ntabe; Mbasa, Ndemo; Kabunga, Deka Kambale; Karafuli, Kambale

2013-01-01

Background: HIV/AIDS and Tuberculosis (TB) are major contributors to the burden of disease in sub-Saharan Africa. The two diseases have been described as a harmful synergy as they are biologically and epidemiologically linked. Control of TB/HIV co-infection is an integral and most challenging part of both national TB and national HIV control programmes, especially in contexts of instability where health systems are suffering from political and social strife. This study aimed at assessing the provision of HIV/TB co-infection services in health facilities in the conflict-ridden region of Goma in Democratic Republic of Congo. Methods: A cross-sectional survey of health facilities that provide either HIV or TB services or both was carried out. A semi-structured questionnaire was used to collect the data which was analysed using descriptive statistics. Results: Eighty facilities were identified, of which 64 facilities were publicly owned. TB care was more available than HIV care (in 61% vs. 9% of facilities). Twenty-three facilities (29%) offered services to co-infected patients. TB/HIV co-infection rates among patients were unknown in 82% of the facilities. Only 19 facilities (24%) reported some coordination with and support from concerned diseases’ control programmes. HIV and TB services are largely fragmented, indicating imbalances and poor coordination by disease control programmes. Conclusion: HIV and TB control appear not to be the focus of health interventions in this crisis affected region, despite the high risks of TB and HIV infection in the setting. Comprehensive public health response to this setting calls for reforms that promote joint TB/HIV co-infection control, including improved leadership by the HIV programmes that accuse weaknesses in this conflict-ridden region. PMID:24596866

TB/HIV Co-Infection Care in Conflict-Affected Settings: A Mapping of Health Facilities in the Goma Area, Democratic Republic of Congo.

PubMed

Kaboru, Berthollet Bwira; Ogwang, Brenda A; Namegabe, Edmond Ntabe; Mbasa, Ndemo; Kabunga, Deka Kambale; Karafuli, Kambale

2013-09-01

HIV/AIDS and Tuberculosis (TB) are major contributors to the burden of disease in sub-Saharan Africa. The two diseases have been described as a harmful synergy as they are biologically and epidemiologically linked. Control of TB/HIV co-infection is an integral and most challenging part of both national TB and national HIV control programmes, especially in contexts of instability where health systems are suffering from political and social strife. This study aimed at assessing the provision of HIV/TB co-infection services in health facilities in the conflict-ridden region of Goma in Democratic Republic of Congo. A cross-sectional survey of health facilities that provide either HIV or TB services or both was carried out. A semi-structured questionnaire was used to collect the data which was analysed using descriptive statistics. Eighty facilities were identified, of which 64 facilities were publicly owned. TB care was more available than HIV care (in 61% vs. 9% of facilities). Twenty-three facilities (29%) offered services to co-infected patients. TB/HIV co-infection rates among patients were unknown in 82% of the facilities. Only 19 facilities (24%) reported some coordination with and support from concerned diseases' control programmes. HIV and TB services are largely fragmented, indicating imbalances and poor coordination by disease control programmes. HIV and TB control appear not to be the focus of health interventions in this crisis affected region, despite the high risks of TB and HIV infection in the setting. Comprehensive public health response to this setting calls for reforms that promote joint TB/HIV co-infection control, including improved leadership by the HIV programmes that accuse weaknesses in this conflict-ridden region.

Programmable multi-node quantum network design and simulation

NASA Astrophysics Data System (ADS)

Dasari, Venkat R.; Sadlier, Ronald J.; Prout, Ryan; Williams, Brian P.; Humble, Travis S.

2016-05-01

Software-defined networking offers a device-agnostic programmable framework to encode new network functions. Externally centralized control plane intelligence allows programmers to write network applications and to build functional network designs. OpenFlow is a key protocol widely adopted to build programmable networks because of its programmability, flexibility and ability to interconnect heterogeneous network devices. We simulate the functional topology of a multi-node quantum network that uses programmable network principles to manage quantum metadata for protocols such as teleportation, superdense coding, and quantum key distribution. We first show how the OpenFlow protocol can manage the quantum metadata needed to control the quantum channel. We then use numerical simulation to demonstrate robust programmability of a quantum switch via the OpenFlow network controller while executing an application of superdense coding. We describe the software framework implemented to carry out these simulations and we discuss near-term efforts to realize these applications.

Intrinsic evolution of controllable oscillators in FPTA-2

NASA Technical Reports Server (NTRS)

Sekanina, Lukas; Zebulum, Ricardo S.

2005-01-01

Simple one- and two-bit controllable oscillators were intrinsically evolved using only four cells of Field Programmable Transistor Array (FPTA-2). These oscillators can produce different oscillations for different setting of control signals. Therefore, they could be used, in principle, to compose complex networks of oscillators that could exhibit rich dynamical behavior in order to perform a computation or to model a desired system.

TECHNICAL DESIGN NOTE: Digital proportional-integral-derivative velocity controller of a Mössbauer spectrometer

NASA Astrophysics Data System (ADS)

Pechousek, J.; Prochazka, R.; Mashlan, M.; Jancik, D.; Frydrych, J.

2009-01-01

The digital proportional-integral-derivative (PID) velocity controller used in the Mössbauer spectrometer implemented in field programmable gate array (FPGA) is based on the National Instruments CompactRIO embedded system and LabVIEW graphical programming tools. The system works as a remote system accessible via the Ethernet. The digital controller operates in real-time conditions, and the maximum sampling frequency is approximately 227 kS s-1. The system was tested with standard sample measurements of α-Fe and α-57Fe2O3 on two different electromechanical velocity transducers. The nonlinearities of the velocity scales in the relative form are better than 0.2%. The replacement of the standard analog PID controller by the new system brings the possibility of optimizing the control process more precisely.

Programmable removal of bacterial strains by use of genome-targeting CRISPR-Cas systems.

PubMed

Gomaa, Ahmed A; Klumpe, Heidi E; Luo, Michelle L; Selle, Kurt; Barrangou, Rodolphe; Beisel, Chase L

2014-01-28

CRISPR (clustered regularly interspaced short palindromic repeats)-Cas (CRISPR-associated) systems in bacteria and archaea employ CRISPR RNAs to specifically recognize the complementary DNA of foreign invaders, leading to sequence-specific cleavage or degradation of the target DNA. Recent work has shown that the accidental or intentional targeting of the bacterial genome is cytotoxic and can lead to cell death. Here, we have demonstrated that genome targeting with CRISPR-Cas systems can be employed for the sequence-specific and titratable removal of individual bacterial strains and species. Using the type I-E CRISPR-Cas system in Escherichia coli as a model, we found that this effect could be elicited using native or imported systems and was similarly potent regardless of the genomic location, strand, or transcriptional activity of the target sequence. Furthermore, the specificity of targeting with CRISPR RNAs could readily distinguish between even highly similar strains in pure or mixed cultures. Finally, varying the collection of delivered CRISPR RNAs could quantitatively control the relative number of individual strains within a mixed culture. Critically, the observed selectivity and programmability of bacterial removal would be virtually impossible with traditional antibiotics, bacteriophages, selectable markers, or tailored growth conditions. Once delivery challenges are addressed, we envision that this approach could offer a novel means to quantitatively control the composition of environmental and industrial microbial consortia and may open new avenues for the development of "smart" antibiotics that circumvent multidrug resistance and differentiate between pathogenic and beneficial microorganisms. Controlling the composition of microbial populations is a critical aspect in medicine, biotechnology, and environmental cycles. While different antimicrobial strategies, such as antibiotics, antimicrobial peptides, and lytic bacteriophages, offer partial solutions, what remains elusive is a generalized and programmable strategy that can distinguish between even closely related microorganisms and that allows for fine control over the composition of a microbial population. This study demonstrates that RNA-directed immune systems in bacteria and archaea called CRISPR-Cas systems can provide such a strategy. These systems can be employed to selectively and quantitatively remove individual bacterial strains based purely on sequence information, creating opportunities in the treatment of multidrug-resistant infections, the control of industrial fermentations, and the study of microbial consortia.

Simultaneous topographic and elemental chemical and magnetic contrast in scanning tunneling microscopy

DOEpatents

Rose, Volker; Preissner, Curt A; Hla, Saw-Wai; Wang, Kangkang; Rosenmann, Daniel

2014-09-30

A method and system for performing simultaneous topographic and elemental chemical and magnetic contrast analysis in a scanning, tunneling microscope. The method and system also includes nanofabricated coaxial multilayer tips with a nanoscale conducting apex and a programmable in-situ nanomanipulator to fabricate these tips and also to rotate tips controllably.

[Coordinated care after myocardial infarction. The statement of the Polish Cardiac Society and the Agency for Health Technology Assessment and Tariff System].

PubMed

Jankowski, Piotr; Gąsior, Mariusz; Gierlotka, Marek; Cegłowska, Urszula; Słomka, Marta; Eysymontt, Zbigniew; Gałaszek, Michał; Buszman, Piotr; Kalarus, Zbigniew; Kaźmierczak, Jarosław; Legutko, Jacek; Sujkowska, Gabriela; Matusewicz, Wojciech; Opolski, Grzegorz; Hoffman, Piotr

2016-01-01

The in-hospital mortality following myocardial infarction has decreased substantially over the last two decades in Poland. However, according to the available evidence approximately every 10th patient discharged after myocardial infarction (MI) dies during next 12 months. We identified the most important barriers (e.g. insufficient risk factors control, insufficient and delayed cardiac rehabilitation, suboptimal pharmacotherapy, delayed complete myocardial revascularisation) and proposed a new nation-wide system of coordinated care after MI. The system should consist of four modules: complete revascularisation, education and rehabilitation programme, electrotherapy (including ICDs and BiVs when appropriate) and periodical cardiac consultations. At first stage the coordinated care programme should last 12 months. The proposal contains also the quality of care assessment based on clinical measures (e.g. risk factors control, rate of complete myocardial revascularisation, etc.) as well as on the rate of cardiovascular events. The wide implementation of the proposed system is expected to decrease one year mortality after MI and allow for better financial resources allocation in Poland.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Potts, C.; Faber, M.; Gunderson, G.

The as-built lattice of the Rapid-Cycling Synchrotron (RCS) had two sets of correction sextupoles and two sets of quadrupoles energized by dc power supplies to control the tune and the tune tilt. With this method of powering these magnets, adjustment of tune conditions during the accelerating cycle as needed was not possible. A set of dynamically programmable power supplies has been built and operated to provide the required chromaticity adjustment. The short accelerating time (16.7 ms) of the RCS and the inductance of the magnets dictated large transistor amplifier power supplies. The required time resolution and waveform flexibility indicated themore » desirability of computer control. Both the amplifiers and controls are described, along with resulting improvements in the beam performance. A set of octupole magnets and programmable power supplies with similar dynamic qualities have been constructed and installed to control the anticipated high-intensity transverse instability. This system will be operational in the spring of 1981.« less

Gas chromatograph-mass spectrometer (GC/MS) system for quantitative analysis of reactive chemical compounds

DOEpatents

Grindstaff, Quirinus G.

1992-01-01

Described is a new gas chromatograph-mass spectrometer (GC/MS) system and method for quantitative analysis of reactive chemical compounds. All components of such a GC/MS system external to the oven of the gas chromatograph are programmably temperature controlled to operate at a volatilization temperature specific to the compound(s) sought to be separated and measured.

Effectiveness of Treatment of Idiopathic Scoliosis by SpineCor Dynamic Bracing with Special Physiotherapy Programme in SpineCor System.

PubMed

Rożek, Karina; Potaczek, Tomasz; Zarzycka, Maja; Lipik, Ewa; Jasiewicz, Barbara

2016-10-28

The SpineCor dynamic brace for the treatment of idiopathic scoliosis is designed to maintain the correct position of the spine and a new movement strategy for 20 hours per day. The SpineCor exercise system intensifies and complements the brace treatment. This study evaluated the effectiveness of a comprehensive treatment of idiopathic scoliosis involving the SpineCor system. The study assessed a group of 40 patients (38 girls and 2 boys) with idiopathic scoliosis treated with the SpineCor brace. The average age at beginning of treatment was 13.1 yrs (10-15). Minimum treatment time was 18 months. 28 participants met the SRS criteria. Angles of the curve before and after bracing based on imaging studies were measured at the beginning and end of the treatment, analyzed and compared. Rehabilitation focused on teaching active corrective movement throughout the brace treatment. A control group was formed of 33 patients, including 21 meeting the SRS criteria, who used the SpineCor dynamic brace but did not participate in the associated exercise programme. Among patients from the exercise group who met the SRS criteria, 25% demonstrated reduced curve angles, 35.7% demonstrated curve progression and 39.3% showed stabilization (no change). Among patients meeting the SRS criteria from the control group, a decrease in curve angle was observed in 14.3% of the patients, curve progression in 57.1% and stabilization in 28.6%. 1. The addition of a dedicated physiotherapy programme to SpineCor dynamic bracing improves the chances of obtaining a positive outcome. 2. It is necessary to further analyse the course of the comprehensive treatment, also with regard to other types of braces and kinesiotherapy programmes.

Comparison of range of commercial or primary care led weight reduction programmes with minimal intervention control for weight loss in obesity: lighten Up randomised controlled trial.

PubMed

Jolly, Kate; Lewis, Amanda; Beach, Jane; Denley, John; Adab, Peymane; Deeks, Jonathan J; Daley, Amanda; Aveyard, Paul

2011-11-03

To assess the effectiveness of a range of weight management programmes in terms of weight loss. Eight arm randomised controlled trial. Primary care trust in Birmingham, England. 740 obese or overweight men and women with a comorbid disorder identified from general practice records. Weight loss programmes of 12 weeks' duration: Weight Watchers; Slimming World; Rosemary Conley; group based, dietetics led programme; general practice one to one counselling; pharmacy led one to one counselling; choice of any of the six programmes. The comparator group was provided with 12 vouchers enabling free entrance to a local leisure (fitness) centre. The primary outcome was weight loss at programme end (12 weeks). Secondary outcomes were weight loss at one year, self reported physical activity, and percentage weight loss at programme end and one year. Follow-up data were available for 658 (88.9%) participants at programme end and 522 (70.5%) at one year. All programmes achieved significant weight loss from baseline to programme end (range 1.37 kg (general practice) to 4.43 kg (Weight Watchers)), and all except general practice and pharmacy provision resulted in significant weight loss at one year. At one year, only the Weight Watchers group had significantly greater weight loss than did the comparator group (2.5 (95% confidence interval 0.8 to 4.2) kg greater loss,). The commercial programmes achieved significantly greater weight loss than did the primary care programmes at programme end (mean difference 2.3 (1.3 to 3.4) kg). The primary care programmes were the most costly to provide. Participants allocated to the choice arm did not have better outcomes than those randomly allocated to a programme. Commercially provided weight management services are more effective and cheaper than primary care based services led by specially trained staff, which are ineffective. Trial registration Current Controlled Trials ISRCTN25072883.

Feed-forward digital phase and amplitude correction system

DOEpatents

Yu, D.U.L.; Conway, P.H.

1994-11-15

Phase and amplitude modifications in repeatable RF pulses at the output of a high power pulsed microwave amplifier are made utilizing a digital feed-forward correction system. A controlled amount of the output power is coupled to a correction system for processing of phase and amplitude information. The correction system comprises circuitry to compare the detected phase and amplitude with the desired phase and amplitude, respectively, and a digitally programmable phase shifter and attenuator and digital logic circuitry to control the phase shifter and attenuator. The phase and amplitude of subsequent are modified by output signals from the correction system. 11 figs.

Feed-forward digital phase and amplitude correction system

DOEpatents

Yu, David U. L.; Conway, Patrick H.

1994-01-01

Phase and amplitude modifications in repeatable RF pulses at the output of a high power pulsed microwave amplifier are made utilizing a digital feed-forward correction system. A controlled amount of the output power is coupled to a correction system for processing of phase and amplitude information. The correction system comprises circuitry to compare the detected phase and amplitude with the desired phase and amplitude, respectively, and a digitally programmable phase shifter and attenuator and digital logic circuitry to control the phase shifter and attenuator. The Phase and amplitude of subsequent are modified by output signals from the correction system.

Advanced Data Acquisition Systems

NASA Technical Reports Server (NTRS)

Perotti, J.

2003-01-01

Current and future requirements of the aerospace sensors and transducers field make it necessary for the design and development of new data acquisition devices and instrumentation systems. New designs are sought to incorporate self-health, self-calibrating, self-repair capabilities, allowing greater measurement reliability and extended calibration cycles. With the addition of power management schemes, state-of-the-art data acquisition systems allow data to be processed and presented to the users with increased efficiency and accuracy. The design architecture presented in this paper displays an innovative approach to data acquisition systems. The design incorporates: electronic health self-check, device/system self-calibration, electronics and function self-repair, failure detection and prediction, and power management (reduced power consumption). These requirements are driven by the aerospace industry need to reduce operations and maintenance costs, to accelerate processing time and to provide reliable hardware with minimum costs. The project's design architecture incorporates some commercially available components identified during the market research investigation like: Field Programmable Gate Arrays (FPGA) Programmable Analog Integrated Circuits (PAC IC) and Field Programmable Analog Arrays (FPAA); Digital Signal Processing (DSP) electronic/system control and investigation of specific characteristics found in technologies like: Electronic Component Mean Time Between Failure (MTBF); and Radiation Hardened Component Availability. There are three main sections discussed in the design architecture presented in this document. They are the following: (a) Analog Signal Module Section, (b) Digital Signal/Control Module Section and (c) Power Management Module Section. These sections are discussed in detail in the following pages. This approach to data acquisition systems has resulted in the assignment of patent rights to Kennedy Space Center under U.S. patent # 6,462,684. Furthermore, NASA KSC commercialization office has issued licensing rights to Circuit Avenue Netrepreneurs, LLC , a minority-owned business founded in 1999 located in Camden, NJ.

Development and Design of a User Interface for a Computer Automated Heating, Ventilation, and Air Conditioning System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, B.; /Fermilab

1999-10-08

A user interface is created to monitor and operate the heating, ventilation, and air conditioning system. The interface is networked to the system's programmable logic controller. The controller maintains automated control of the system. The user through the interface is able to see the status of the system and override or adjust the automatic control features. The interface is programmed to show digital readouts of system equipment as well as visual queues of system operational statuses. It also provides information for system design and component interaction. The interface is made easier to read by simple designs, color coordination, and graphics.more » Fermi National Accelerator Laboratory (Fermi lab) conducts high energy particle physics research. Part of this research involves collision experiments with protons, and anti-protons. These interactions are contained within one of two massive detectors along Fermilab's largest particle accelerator the Tevatron. The D-Zero Assembly Building houses one of these detectors. At this time detector systems are being upgraded for a second experiment run, titled Run II. Unlike the previous run, systems at D-Zero must be computer automated so operators do not have to continually monitor and adjust these systems during the run. Human intervention should only be necessary for system start up and shut down, and equipment failure. Part of this upgrade includes the heating, ventilation, and air conditioning system (HVAC system). The HVAC system is responsible for controlling two subsystems, the air temperatures of the D-Zero Assembly Building and associated collision hall, as well as six separate water systems used in the heating and cooling of the air and detector components. The BYAC system is automated by a programmable logic controller. In order to provide system monitoring and operator control a user interface is required. This paper will address methods and strategies used to design and implement an effective user interface. Background material pertinent to the BYAC system will cover the separate water and air subsystems and their purposes. In addition programming and system automation will also be covered.« less

Strengthening the afferent limb of rapid response systems: an educational intervention using web-based learning for early recognition and responding to deteriorating patients.

PubMed

Liaw, Sok Ying; Wong, Lai Fun; Ang, Sophia Bee Leng; Ho, Jasmine Tze Yin; Siau, Chiang; Ang, Emily Neo Kim

2016-06-01

The timely recognition and response to patients with clinical deteriorations constitute the afferent limb failure of a rapid response system (RRS). This area is a persistent problem in acute healthcare settings worldwide. In this study, we evaluated the effect of an educational programme on improving the nurses' knowledge and performances in recognising and responding to clinical deterioration. The interactive web-based programme addressed three areas: (1) early detection of changes in vital signs; (2) performance of nursing assessment and interventions using airway, breathing, circulation, disability and expose/examine and (3) reporting clinical deterioration using identity, situation, background, assessment and recommendation. Sixty-seven registered nurses participated in the randomised control study. The experimental group underwent a 3 h programme while the control group received no intervention. Pretests and post-tests, a mannequin-based assessment and a multiple-choice knowledge questionnaire were conducted. We evaluated the participants' performances in assessing, managing and reporting the deterioration of a patient using a validated performance tool. A significantly higher number of nurses from the experimental group than the control group monitored respiratory rates (48.2% vs 25%, p<0.05) and pulse rates (74.3% vs 37.5%, p<0.01) in the simulated environment, after the intervention. The post-test mean scores of the experimental group was significantly higher than the control group for knowledge (21.29 vs 18.28, p<0.001), performance in assessing and managing clinical deterioration (25.83 vs 19.50, p<0.001) and reporting clinical deterioration (12.83 vs 10.97, p<0.001). A web-based educational programme developed for hospital nurses to strengthen the afferent limb of the RRS significantly increased their knowledge and performances in assessing, managing and reporting clinical deterioration. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Reverse osmosis water purification system

NASA Technical Reports Server (NTRS)

Ahlstrom, H. G.; Hames, P. S.; Menninger, F. J.

1986-01-01

A reverse osmosis water purification system, which uses a programmable controller (PC) as the control system, was designed and built to maintain the cleanliness and level of water for various systems of a 64-m antenna. The installation operates with other equipment of the antenna at the Goldstone Deep Space Communication Complex. The reverse osmosis system was designed to be fully automatic; with the PC, many complex sequential and timed logic networks were easily implemented and are modified. The PC monitors water levels, pressures, flows, control panel requests, and set points on analog meters; with this information various processes are initiated, monitored, modified, halted, or eliminated as required by the equipment being supplied pure water.

Instrumentation and control of harmonic oscillators via a single-board microprocessor-FPGA device.

PubMed

Picone, Rico A R; Davis, Solomon; Devine, Cameron; Garbini, Joseph L; Sidles, John A

2017-04-01

We report the development of an instrumentation and control system instantiated on a microprocessor-field programmable gate array (FPGA) device for a harmonic oscillator comprising a portion of a magnetic resonance force microscope. The specific advantages of the system are that it minimizes computation, increases maintainability, and reduces the technical barrier required to enter the experimental field of magnetic resonance force microscopy. Heterodyne digital control and measurement yields computational advantages. A single microprocessor-FPGA device improves system maintainability by using a single programming language. The system presented requires significantly less technical expertise to instantiate than the instrumentation of previous systems, yet integrity of performance is retained and demonstrated with experimental data.

Instrumentation and control of harmonic oscillators via a single-board microprocessor-FPGA device

NASA Astrophysics Data System (ADS)

Picone, Rico A. R.; Davis, Solomon; Devine, Cameron; Garbini, Joseph L.; Sidles, John A.

2017-04-01

We report the development of an instrumentation and control system instantiated on a microprocessor-field programmable gate array (FPGA) device for a harmonic oscillator comprising a portion of a magnetic resonance force microscope. The specific advantages of the system are that it minimizes computation, increases maintainability, and reduces the technical barrier required to enter the experimental field of magnetic resonance force microscopy. Heterodyne digital control and measurement yields computational advantages. A single microprocessor-FPGA device improves system maintainability by using a single programming language. The system presented requires significantly less technical expertise to instantiate than the instrumentation of previous systems, yet integrity of performance is retained and demonstrated with experimental data.

A Novel Mu Rhythm-based Brain Computer Interface Design that uses a Programmable System on Chip.

PubMed

Joshi, Rohan; Saraswat, Prateek; Gajendran, Rudhram

2012-01-01

This paper describes the system design of a portable and economical mu rhythm based Brain Computer Interface which employs Cypress Semiconductors Programmable System on Chip (PSoC). By carrying out essential processing on the PSoC, the use of an extra computer is eliminated, resulting in considerable cost savings. Microsoft Visual Studio 2005 and PSoC Designer 5.01 are employed in developing the software for the system, the hardware being custom designed. In order to test the usability of the BCI, preliminary testing is carried out by training three subjects who were able to demonstrate control over their electroencephalogram by moving a cursor present at the center of the screen towards the indicated direction with an average accuracy greater than 70% and a bit communication rate of up to 7 bits/min.

An inexpensive programmable illumination microscope with active feedback

PubMed Central

Tompkins, Nathan; Fraden, Seth

2016-01-01

We have developed a programmable illumination system capable of tracking and illuminating numerous objects simultaneously using only low-cost and reused optical components. The active feedback control software allows for a closed-loop system that tracks and perturbs objects of interest automatically. Our system uses a static stage where the objects of interest are tracked computationally as they move across the field of view allowing for a large number of simultaneous experiments. An algorithmically determined illumination pattern can be applied anywhere in the field of view with simultaneous imaging and perturbation using different colors of light to enable spatially and temporally structured illumination. Our system consists of a consumer projector, camera, 35-mm camera lens, and a small number of other optical and scaffolding components. The entire apparatus can be assembled for under $4,000. PMID:27642182

A Novel Mu Rhythm-based Brain Computer Interface Design that uses a Programmable System on Chip

PubMed Central

Joshi, Rohan; Saraswat, Prateek; Gajendran, Rudhram

2012-01-01

This paper describes the system design of a portable and economical mu rhythm based Brain Computer Interface which employs Cypress Semiconductors Programmable System on Chip (PSoC). By carrying out essential processing on the PSoC, the use of an extra computer is eliminated, resulting in considerable cost savings. Microsoft Visual Studio 2005 and PSoC Designer 5.01 are employed in developing the software for the system, the hardware being custom designed. In order to test the usability of the BCI, preliminary testing is carried out by training three subjects who were able to demonstrate control over their electroencephalogram by moving a cursor present at the center of the screen towards the indicated direction with an average accuracy greater than 70% and a bit communication rate of up to 7 bits/min. PMID:23493871

Image sensor system with bio-inspired efficient coding and adaptation.

PubMed

Okuno, Hirotsugu; Yagi, Tetsuya

2012-08-01

We designed and implemented an image sensor system equipped with three bio-inspired coding and adaptation strategies: logarithmic transform, local average subtraction, and feedback gain control. The system comprises a field-programmable gate array (FPGA), a resistive network, and active pixel sensors (APS), whose light intensity-voltage characteristics are controllable. The system employs multiple time-varying reset voltage signals for APS in order to realize multiple logarithmic intensity-voltage characteristics, which are controlled so that the entropy of the output image is maximized. The system also employs local average subtraction and gain control in order to obtain images with an appropriate contrast. The local average is calculated by the resistive network instantaneously. The designed system was successfully used to obtain appropriate images of objects that were subjected to large changes in illumination.

Past and Ongoing Tsetse and Animal Trypanosomiasis Control Operations in Five African Countries: A Systematic Review

PubMed Central

Holt, Hannah R.; Selby, Richard; Guitian, Javier

2016-01-01

Background Control operations targeting Animal African Trypanosomiasis and its primary vector, the tsetse, were covering approximately 128,000 km2 of Africa in 2001, which is a mere 1.3% of the tsetse infested area. Although extensive trypanosomiasis and tsetse (T&T) control operations have been running since the beginning of the 20th century, Animal African Trypanosomiasis is still a major constraint of livestock production in sub-Saharan Africa. Methodology/Principal Findings We performed a systematic review of the existing literature describing T&T control programmes conducted in a selection of five African countries, namely Burkina Faso, Cameroon, Ethiopia, Uganda and Zambia, between 1980 and 2015. Sixty-eight documents were eventually selected from those identified by the database search. This was supplemented with information gathered through semi-structured interviews conducted with twelve key informants recruited in the study countries and selected based on their experience and knowledge of T&T control. The combined information from these two sources was used to describe the inputs, processes and outcomes from 23 major T&T control programmes implemented in the study countries. Although there were some data gaps, involvement of the target communities and sustainability of the control activities were identified as the two main issues faced by these programmes. Further, there was a lack of evaluation of these control programmes, as well as a lack of a standardised methodology to conduct such evaluations. Conclusions/Significance Past experiences demonstrated that coordinated and sustained control activities require careful planning, and evidence of successes, failures and setbacks from past control programmes represent a mine of information. As there is a lack of evaluation of these programmes, these data have not been fully exploited for the design, analyses and justification of future control programmes. PMID:28027299

Microcomputer technology applications: Charger and regulator software for a breadboard programmable power processor

NASA Technical Reports Server (NTRS)

Green, D. M.

1978-01-01

Software programs are described, one which implements a voltage regulation function, and one which implements a charger function with peak-power tracking of its input. The software, written in modular fashion, is intended as a vehicle for further experimentation with the P-3 system. A control teleprinter allows an operator to make parameter modifications to the control algorithm during experiments. The programs require 3K ROM and 2K ram each. User manuals for each system are included as well as a third program for simple I/O control.

Critical interactions between Global Fund-supported programmes and health systems: a case study in Indonesia.

PubMed

Desai, Monica; Rudge, James W; Adisasmito, Wiku; Mounier-Jack, Sandra; Coker, Richard

2010-11-01

The Global Fund to Fight AIDS, Tuberculosis and Malaria has played an important role in financing the response to HIV/AIDS and tuberculosis (TB) in Indonesia. As part of a series of case studies, we assessed the nature and extent of integration of Global Fund portfolios into the national HIV and TB programmes, integration of the HIV and TB programmes within the general health system, and system-wide effects of Global Fund support on the health care system in Indonesia. The study relied on a literature review and interviews with 22 key informants using the Systemic Rapid Assessment Toolkit and thematic analysis. Global Fund programmes in Indonesia are highly vertical and centralized, in contrast with the decentralized nature of the Indonesian health system. Consequently, there is more integration of all functions at local levels than centrally. There is a high level of integration of planning of Global Fund HIV and TB portfolios into the National AIDS and TB programmes and some limited integration of these programmes with other disease programmes, through joint working groups. Other synergies include strengthening of stewardship and governance and increased staff recruitment encouraged by incentive payments and training. Monitoring and evaluation functions of the Global Fund programmes are not integrated with the disease programmes, with parallel indicators and reporting systems. System-wide effects include greater awareness of governance and stewardship in response to the temporary suspension of Global Fund funding in 2008, and increased awareness of the need to integrate programme planning, financing and service delivery. Global Fund investment has freed up resources for other programmes, particularly at local levels. However, this may hinder a robust exit strategy from Global Fund funding. Furthermore, Global Fund monetary incentives may result in staff shifting into HIV and TB programmes.

Fabrication of miniature elastomer lenses with programmable liquid mold for smartphone microscopy: curing polydimethylsiloxane with in situ curvature control

NASA Astrophysics Data System (ADS)

Karunakaran, Bhuvaneshwari; Tharion, Joseph; Dhawangale, Arvind Ramrao; Paul, Debjani; Mukherji, Soumyo

2018-02-01

Miniature lenses can transform commercial imaging systems, e.g., smartphones and webcams, into powerful, low-cost, handheld microscopes. To date, the reproducible fabrication of polymer lenses is still a challenge as they require controlled dispensing of viscous liquid. This paper reports a reproducible lens fabrication technique using liquid mold with programmable curvature and off-the-shelf materials. The lens curvature is controlled during fabrication by tuning the curvature of an interface of two immiscible liquids [polydimethylsiloxane (PDMS) and glycerol]. The curvature control is implemented using a visual feedback system, which includes a software-based guiding system to produce lenses of desired curvature. The technique allows PDMS lens fabrication of a wide range of sizes and focal lengths, within 20 min. The fabrication of two lens diameters: 1 and 5 mm with focal lengths ranging between 1.2 and 11 mm are demonstrated. The lens surface and bulk quality check performed using X-ray microtomography and atomic force microscopy reveal that the lenses are suitable for optical imaging. Furthermore, a smartphone microscope with ˜1.4-μm resolution is developed using a self-assembly of a single high power fabricated lens and microaperture. The lenses have various potential applications, e.g., optofluidics, diagnostics, forensics, and surveillance.

Novel Television-Based Cognitive Training Improves Working Memory and Executive Function

PubMed Central

Shatil, Evelyn; Mikulecká, Jaroslava; Bellotti, Francesco; Bureš, Vladimír

2014-01-01

The main study objective was to investigate the effect of interactive television-based cognitive training on cognitive performance of 119 healthy older adults, aged 60–87 years. Participants were randomly allocated to a cognitive training group or to an active control group in a single-blind controlled two-group design. Before and after training interactive television cognitive performance was assessed on well validated tests of fluid, higher-order ability, and system usability was evaluated. The participants in the cognitive training group completed a television-based cognitive training programme, while the participants in the active control group completed a TV-based programme of personally benefiting activities. Significant improvements were observed in well validated working memory and executive function tasks in the cognitive training but not in the control group. None of the groups showed statistically significant improvement in life satisfaction score. Participants' reports of “adequate” to “high” system usability testify to the successful development and implementation of the interactive television-based system and compliant cognitive training contents. The study demonstrates that cognitive training delivered by means of an interactive television system can generate genuine cognitive benefits in users and these are measurable using well-validated cognitive tests. Thus, older adults who cannot use or afford a computer can easily use digital interactive television to benefit from advanced software applications designed to train cognition. PMID:24992187

How can systems engineering inform the methods of programme evaluation in health professions education?

PubMed

Rojas, David; Grierson, Lawrence; Mylopoulos, Maria; Trbovich, Patricia; Bagli, Darius; Brydges, Ryan

2018-04-01

We evaluate programmes in health professions education (HPE) to determine their effectiveness and value. Programme evaluation has evolved from use of reductionist frameworks to those addressing the complex interactions between programme factors. Researchers in HPE have recently suggested a 'holistic programme evaluation' aiming to better describe and understand the implications of 'emergent processes and outcomes'. We propose a programme evaluation framework informed by principles and tools from systems engineering. Systems engineers conceptualise complexity and emergent elements in unique ways that may complement and extend contemporary programme evaluations in HPE. We demonstrate how the abstract decomposition space (ADS), an engineering knowledge elicitation tool, provides the foundation for a systems engineering informed programme evaluation designed to capture both planned and emergent programme elements. We translate the ADS tool to use education-oriented language, and describe how evaluators can use it to create a programme-specific ADS through iterative refinement. We provide a conceptualisation of emergent elements and an equation that evaluators can use to identify the emergent elements in their programme. Using our framework, evaluators can analyse programmes not as isolated units with planned processes and planned outcomes, but as unfolding, complex interactive systems that will exhibit emergent processes and emergent outcomes. Subsequent analysis of these emergent elements will inform the evaluator as they seek to optimise and improve the programme. Our proposed systems engineering informed programme evaluation framework provides principles and tools for analysing the implications of planned and emergent elements, as well as their potential interactions. We acknowledge that our framework is preliminary and will require application and constant refinement. We suggest that our framework will also advance our understanding of the construct of 'emergence' in HPE research. © 2017 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Quality evaluation in the management of child sponsorship programmes.

PubMed

McDonnell, W A; McDonnell, T P

1994-08-01

Programme evaluation tactics for child sponsorship programmes have historically concentrated on quantitative analysis of service units, amount of money invested, number of countries served, the number of projects, and number of children in each project. While these are valuable measures of programme variables, they do not assess the impact of programmes on the lives of the children sponsored. Outcome measures designed to assess programme impact add greatly to the information available to child welfare professionals. This study collected data about the impact of the programme on the lives of the children. The Child Welfare League's Child Well-Being Scales (CWBS) were used to assess programme impact. Twelve scales were chosen as directly related in type to the programmes administered by Children International, a traditional and well established child sponsorship organization located in Kansas City, Missouri. A thirteenth scale was suggested by field workers in India as particularly relevant to Third World populations. The scales were translated into languages appropriate to each population in the programme countries. Social workers in each country were trained to administer and score them. This analysis used the emerging data technology becoming available to programmes in Third World countries. The system enables administrators in the Third World to evaluate, enhance and summarize their programmes in a way understandable across borders. Epi Info (Dean et al., 1990) was customized to provide the framework for the analysis. The population for this study was selected by a 5% random sampling of children currently enrolled as sponsored children (180,000+ worldwide). These were compared with a waiting-list control group selected randomly from lists of children who have applied for sponsorship but have not yet been receiving services (n = 50 from each project).(ABSTRACT TRUNCATED AT 250 WORDS)

Influence of a Non-formal Environmental Education Programme on Junior High-School Students' Environmental Literacy

NASA Astrophysics Data System (ADS)

Goldman, Daphne; Ben Zvi Assaraf, Orit; Shaharabani, Dina

2013-02-01

One of the solutions implemented by schools for conducting value-based environmental education (EE) is outsourcing: allocating external environmental organizations that develop and conduct EE programmes. This study addressed such a programme-the Green Council Programme (GCP)-developed and implemented in schools by the Israeli Society for Protection of Nature. A pre-test/post-test design was used to investigate the influence of participation in the GCP on components of junior high-school students' environmental literacy. Conceptualizations of 'environment', environmental attitudes and sense of ability to act on environmental issues were studied employing quantitative and qualitative tools. Contribution of the programme to the cognitive domain, in developing a systemic understanding of the environment, was limited. On the other hand, participating in this programme heightened students' sensitivity to human-environment interrelationships and developed a more ecological worldview. After the programme, students demonstrated greater perception of humans as part of the environment, an increased sensitivity to human impact on the environment and their value for non-human nature moved from an anthropocentric to a more ecocentric orientation. While students' internal locus-of-control increased, when environmental protection entailed personal economic trade-offs, their support was limited and remained unchanged. The article concludes with recommendations, based on the findings, regarding supplementing the school (science) curriculum with external EE enrichment programmes.

Feasibility, safety and preliminary evidence of the effectiveness of a home-based exercise programme for older people with Alzheimer's disease: a pilot randomized controlled trial.

PubMed

Suttanon, Plaiwan; Hill, Keith D; Said, Catherine M; Williams, Susan B; Byrne, Karin N; LoGiudice, Dina; Lautenschlager, Nicola T; Dodd, Karen J

2013-05-01

To evaluate the feasibility and safety of a home-based exercise programme for people with Alzheimer's disease, and to provide preliminary evidence of programme effectiveness in improving balance and mobility and reducing falls risk. A randomized controlled trial. Community. Forty people with mild to moderate Alzheimer's disease (mean age 81.9, SD 5.72; 62.5% female). Participants were randomized to a six-month home-based individually tailored balance, strengthening and walking exercise programme (physiotherapist) or a six-month home-based education programme (control) (occupational therapist). Both programmes provided six home-visits and five follow-up phone calls. Balance, mobility, falls and falls risk were measured at baseline and programme completion. Intention-to-treat analysis using a generalized linear model with group allocation as a predictor variable was performed to evaluate programme effectiveness. Feasibility and adverse events were systematically recorded at each contact. Fifty-eight per cent of the exercise group finished the programme, completing an average of 83% of prescribed sessions, with no adverse events reported. Functional Reach improved significantly (P = 0.002) in the exercise group (mean (SD), 2.28 (4.36)) compared to the control group (-2.99 (4.87)). Significant improvement was also observed for the Falls Risk for Older People - Community score (P = 0.008) and trends for improvement on several other balance, mobility, falls and falls risk measures for the exercise group compared to the control group. The exercise programme was feasible and safe and may help improve balance and mobility performance and reduce falls risk in people with Alzheimer's disease.

Considerations on BVD eradication for the Irish livestock industry

PubMed Central

2011-01-01

Animal Health Ireland has produced clear guidelines for the control of Bovine Viral Diarrhoea (BVD) infection in Irish cattle herds. In the course of developing these guidelines it was clear that a framework for regional and/or national BVD control would be required to increase the uptake of BVD control at farm level and reduce the overall prevalence of the disease. This paper assessed the economic impact of BVD, epidemiological aspects of the disease to its control, models of BVD control, international experiences of BVD control programmes. The technical knowledge and test technology exists to eradicate BVD. Indeed, many countries have successfully and others are embarking on control of the disease. The identification and prompt elimination of PI cattle will form the basis of any control programme. The trade of such animals must be curtailed. Pregnant and potentially pregnant carrying PI foetuses pose a significant threat. International experience indicates systematic, well coordinated programmes have the most success, while voluntary programmes can make good initial progress but ultimately fail. The farming community must buy into any proposed programme, and without their support, failure is likely. To buy into the programme and create such a demand for BVD control, farmers must first be well informed. It is likely that stemming economic loss and improving productivity will be the primary motivator at individual farm level. PMID:21967764

Laser scanning confocal microscope with programmable amplitude, phase, and polarization of the illumination beam.

PubMed

Boruah, B R; Neil, M A A

2009-01-01

We describe the design and construction of a laser scanning confocal microscope with programmable beam forming optics. The amplitude, phase, and polarization of the laser beam used in the microscope can be controlled in real time with the help of a liquid crystal spatial light modulator, acting as a computer generated hologram, in conjunction with a polarizing beam splitter and two right angled prisms assembly. Two scan mirrors, comprising an on-axis fast moving scan mirror for line scanning and an off-axis slow moving scan mirror for frame scanning, configured in a way to minimize the movement of the scanned beam over the pupil plane of the microscope objective, form the XY scan unit. The confocal system, that incorporates the programmable beam forming unit and the scan unit, has been implemented to image in both reflected and fluorescence light from the specimen. Efficiency of the system to programmably generate custom defined vector beams has been demonstrated by generating a bottle structured focal volume, which in fact is the overlap of two cross polarized beams, that can simultaneously improve both the lateral and axial resolutions if used as the de-excitation beam in a stimulated emission depletion confocal microscope.

Design and realization of the real-time spectrograph controller for LAMOST based on FPGA

NASA Astrophysics Data System (ADS)

Wang, Jianing; Wu, Liyan; Zeng, Yizhong; Dai, Songxin; Hu, Zhongwen; Zhu, Yongtian; Wang, Lei; Wu, Zhen; Chen, Yi

2008-08-01

A large Schmitt reflector telescope, Large Sky Area Multi-Object Fiber Spectroscopic Telescope(LAMOST), is being built in China, which has effective aperture of 4 meters and can observe the spectra of as many as 4000 objects simultaneously. To fit such a large amount of observational objects, the dispersion part is composed of a set of 16 multipurpose fiber-fed double-beam Schmidt spectrographs, of which each has about ten of moveable components realtimely accommodated and manipulated by a controller. An industrial Ethernet network connects those 16 spectrograph controllers. The light from stars is fed to the entrance slits of the spectrographs with optical fibers. In this paper, we mainly introduce the design and realization of our real-time controller for the spectrograph, our design using the technique of System On Programmable Chip (SOPC) based on Field Programmable Gate Array (FPGA) and then realizing the control of the spectrographs through NIOSII Soft Core Embedded Processor. We seal the stepper motor controller as intellectual property (IP) cores and reuse it, greatly simplifying the design process and then shortening the development time. Under the embedded operating system μC/OS-II, a multi-tasks control program has been well written to realize the real-time control of the moveable parts of the spectrographs. At present, a number of such controllers have been applied in the spectrograph of LAMOST.

Electrokinetic Microactuator Arrays for Control of Vehicles

DTIC Science & Technology

2002-08-01

programmable logic array (PLA) content in each unit cell....................46 Chapter 4 4.1 Schematic showing electroosmotic flow induced by an...control situations involved in propulsion systems, spanning from con- trol of mixing in advanced gas turbine combustors, to active control of surge and... electroosmotic flow, shown schematically in Fig. 4.1, results when an electric field is applied to a liquid electrolyte in contact with a charged solid

Psychological effects of a cosmetic education programme in patients with breast cancer.

PubMed

Park, H Y; Kim, J H; Choi, S; Kang, E; Oh, S; Kim, J Y; Kim, S W

2015-07-01

Treatments for breast cancer often include interventions related to psychosocial issues such as negative body image, loss of femininity, and low self-esteem. We identified the psychological effects of a cosmetics education programme in patients with breast cancer. Cosmetic programme is a specific care designed to help patients handle appearance-related side effects. Thirty-one women with breast cancer at a university hospital in South Korea who received a cosmetics education programme were compared with 29 subjects in a control group who received the treatment as usual. Psychological factors including distress, self-esteem, and sexual functioning were assessed three times (before and after the programme, and at the 1-month follow-up). After the programme, patients in the treatment group were significantly less likely than those in the control group to rely on distress (P = 0.038) and avoidance coping (P < 0.001) but not on self-esteem. The mean scores in the treatment group for sexual functioning were higher than those in the control group after the treatment. Our results suggest the potential usefulness of a brief cosmetics education programme for reducing distress and reliance on negative coping strategies. Implementing a cosmetics programme for patients with breast cancer may encourage patients to control negative psychological factors. © 2015 John Wiley & Sons Ltd.

Real time test bed development for power system operation, control and cyber security

NASA Astrophysics Data System (ADS)

Reddi, Ram Mohan

The operation and control of the power system in an efficient way is important in order to keep the system secure, reliable and economical. With advancements in smart grid, several new algorithms have been developed for improved operation and control. These algorithms need to be extensively tested and validated in real time before applying to the real electric power grid. This work focuses on the development of a real time test bed for testing and validating power system control algorithms, hardware devices and cyber security vulnerability. The test bed developed utilizes several hardware components including relays, phasor measurement units, phasor data concentrator, programmable logic controllers and several software tools. Current work also integrates historian for power system monitoring and data archiving. Finally, two different power system test cases are simulated to demonstrate the applications of developed test bed. The developed test bed can also be used for power system education.

Input-output identification of controlled discrete manufacturing systems

NASA Astrophysics Data System (ADS)

Estrada-Vargas, Ana Paula; López-Mellado, Ernesto; Lesage, Jean-Jacques

2014-03-01

The automated construction of discrete event models from observations of external system's behaviour is addressed. This problem, often referred to as system identification, allows obtaining models of ill-known (or even unknown) systems. In this article, an identification method for discrete event systems (DESs) controlled by a programmable logic controller is presented. The method allows processing a large quantity of observed long sequences of input/output signals generated by the controller and yields an interpreted Petri net model describing the closed-loop behaviour of the automated DESs. The proposed technique allows the identification of actual complex systems because it is sufficiently efficient and well adapted to cope with both the technological characteristics of industrial controllers and data collection requirements. Based on polynomial-time algorithms, the method is implemented as an efficient software tool which constructs and draws the model automatically; an overview of this tool is given through a case study dealing with an automated manufacturing system.

KSC00pp1241

NASA Image and Video Library

2000-09-06

KSC Director Roy Bridges (right) views the new Checkout and Launch Control System (CLCS) at the Hypergolic Maintenance Facility (HMF). Looking on (left to right)are NASA Associate Administrator for Space Flight Joseph Rothenberg, United Space Alliance Lead IPT Frank Norris, KSC Deputy Center Director Jim Jennings, and Deputy Director of External Relations & Business Development Joe Gordon (behind Bridges). At the controls is Charles Novak, HMF programmer, United Space Alliance. The CLCS was declared operational in a ribbon cutting ceremony earlier. The new control room will be used to process the Orbital Maneuvering System pods and Forward Reaction Control System modules at the HMF. This hardware is removed from Space Shuttle orbiters and routinely taken to the HMF for checkout and servicing

KSC-00pp1241

NASA Image and Video Library

2000-09-06

KSC Director Roy Bridges (right) views the new Checkout and Launch Control System (CLCS) at the Hypergolic Maintenance Facility (HMF). Looking on (left to right)are NASA Associate Administrator for Space Flight Joseph Rothenberg, United Space Alliance Lead IPT Frank Norris, KSC Deputy Center Director Jim Jennings, and Deputy Director of External Relations & Business Development Joe Gordon (behind Bridges). At the controls is Charles Novak, HMF programmer, United Space Alliance. The CLCS was declared operational in a ribbon cutting ceremony earlier. The new control room will be used to process the Orbital Maneuvering System pods and Forward Reaction Control System modules at the HMF. This hardware is removed from Space Shuttle orbiters and routinely taken to the HMF for checkout and servicing

The influence of health system organizational structure and culture on integration of health services: the example of HIV service monitoring in South Africa.

PubMed

Kawonga, Mary; Blaauw, Duane; Fonn, Sharon

2016-11-01

Administrative integration of disease control programmes (DCPs) within the district health system has been a health sector reform priority in South Africa for two decades. The reforms entail district managers assuming authority for the planning and monitoring of DCPs in districts, with DCP managers providing specialist support. There has been little progress in achieving this, and a dearth of research exploring why. Using a case study of HIV programme monitoring and evaluation (M&E), this article explores whether South Africa's health system is configured to support administrative integration. The article draws on data from document reviews and interviews with 54 programme and district managers in two of nine provinces, exploring their respective roles in decision-making regarding HIV M&E system design and in using HIV data for monitoring uptake of HIV interventions in districts. Using Mintzberg's configurations framework, we describe three organizational parameters: (a) extent of centralization (whether district managers play a role in decisions regarding the design of the HIV M&E system); (b) key part of the organization (extent to which sub-national programme managers vs district managers play the central role in HIV monitoring in districts); and (c) coordination mechanisms used (whether highly formalized and rules-based or more output-based to promote agency). We find that the health system can be characterized as Mintzberg's machine bureaucracy. It is centralized and highly formalized with structures, management styles and practices that promote programme managers as lead role players in the monitoring of HIV interventions within districts. This undermines policy objectives of district managers assuming this leadership role. Our study enhances the understanding of organizational factors that may limit the success of administrative integration reforms and suggests interventions that may mitigate this. © The Author 2016. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Access to antiretroviral drugs and AIDS management in Senegal.

PubMed

Desclaux, Alice; Ciss, Mounirou; Taverne, Bernard; Sow, Papa S; Egrot, Marc; Faye, Mame A; Lanièce, Isabelle; Sylla, Omar; Delaporte, Eric; Ndoye, Ibrahima

2003-07-01

Description and analysis of the Senegalese Antiretroviral Drug Access Initiative (ISAARV), the first governmental highly active antiretroviral therapy (HAART) treatment programme in Africa, launched in 1998. ISAARV was initially an experimental project designed to evaluate the feasibility, efficacy and acceptability of HAART in an African context. It was based on four principles: collective definition of the strategy, with involvement of the health professionals who would be called on to execute the programme; matching the objectives to available means (gradual enrollment according to drug availability); monitoring by several research programmes; and ongoing adaptation of treatment and follow-up according to the latest international recommendations. Persons qualifying for antiretroviral (ARV) therapy are selected on the basis of immunological and clinical criteria, regardless of economic and social considerations. A system of subsidies was created to favor access to ARV. Following the ARV price reductions that occurred in November 2000, 100% subsidies were created for the poorest participants. Optimal adherence was ensured by monthly follow-up by pharmacists and support groups held by social workers and patient associations. The chosen supply and distribution system allowed drug dispensing to be strictly controlled. The ISAARV programme demonstrates that HAART can be successfully prescribed in Africa. This experience has served as the basis for the creation of a national treatment programme in Senegal planned to treat 7000 patients by 2006.

Application of eco-friendly tools and eco-bio-social strategies to control dengue vectors in urban and peri-urban settings in Thailand

PubMed Central

Kittayapong, Pattamaporn; Thongyuan, Suporn; Olanratmanee, Phanthip; Aumchareoun, Worawit; Koyadun, Surachart; Kittayapong, Rungrith; Butraporn, Piyarat

2012-01-01

Background Dengue is considered one of the most important vector-borne diseases in Thailand. Its incidence is increasing despite routine implementation of national dengue control programmes. This study, conducted during 2010, aimed to demonstrate an application of integrated, community-based, eco-bio-social strategies in combination with locally-produced eco-friendly vector control tools in the dengue control programme, emphasizing urban and peri-urban settings in eastern Thailand. Methodology Three different community settings were selected and were randomly assigned to intervention and control clusters. Key community leaders and relevant governmental authorities were approached to participate in this intervention programme. Ecohealth volunteers were identified and trained in each study community. They were selected among active community health volunteers and were trained by public health experts to conduct vector control activities in their own communities using environmental management in combination with eco-friendly vector control tools. These trained ecohealth volunteers carried out outreach health education and vector control during household visits. Management of public spaces and public properties, especially solid waste management, was efficiently carried out by local municipalities. Significant reduction in the pupae per person index in the intervention clusters when compared to the control ones was used as a proxy to determine the impact of this programme. Results Our community-based dengue vector control programme demonstrated a significant reduction in the pupae per person index during entomological surveys which were conducted at two-month intervals from May 2010 for the total of six months in the intervention and control clusters. The programme also raised awareness in applying eco-friendly vector control approaches and increased intersectoral and household participation in dengue control activities. Conclusion An eco-friendly dengue vector control programme was successfully implemented in urban and peri-urban settings in Thailand, through intersectoral collaboration and practical action at household level, with a significant reduction in vector densities. PMID:23318236

Application of eco-friendly tools and eco-bio-social strategies to control dengue vectors in urban and peri-urban settings in Thailand.

PubMed

Kittayapong, Pattamaporn; Thongyuan, Suporn; Olanratmanee, Phanthip; Aumchareoun, Worawit; Koyadun, Surachart; Kittayapong, Rungrith; Butraporn, Piyarat

2012-12-01

Dengue is considered one of the most important vector-borne diseases in Thailand. Its incidence is increasing despite routine implementation of national dengue control programmes. This study, conducted during 2010, aimed to demonstrate an application of integrated, community-based, eco-bio-social strategies in combination with locally-produced eco-friendly vector control tools in the dengue control programme, emphasizing urban and peri-urban settings in eastern Thailand. Three different community settings were selected and were randomly assigned to intervention and control clusters. Key community leaders and relevant governmental authorities were approached to participate in this intervention programme. Ecohealth volunteers were identified and trained in each study community. They were selected among active community health volunteers and were trained by public health experts to conduct vector control activities in their own communities using environmental management in combination with eco-friendly vector control tools. These trained ecohealth volunteers carried out outreach health education and vector control during household visits. Management of public spaces and public properties, especially solid waste management, was efficiently carried out by local municipalities. Significant reduction in the pupae per person index in the intervention clusters when compared to the control ones was used as a proxy to determine the impact of this programme. Our community-based dengue vector control programme demonstrated a significant reduction in the pupae per person index during entomological surveys which were conducted at two-month intervals from May 2010 for the total of six months in the intervention and control clusters. The programme also raised awareness in applying eco-friendly vector control approaches and increased intersectoral and household participation in dengue control activities. An eco-friendly dengue vector control programme was successfully implemented in urban and peri-urban settings in Thailand, through intersectoral collaboration and practical action at household level, with a significant reduction in vector densities.

Improved Planning and Programming for Energy Efficient New Army Facilities

DTIC Science & Technology

1988-10-01

setpoints to occupant comfort must be considered carefully. Cutting off the HVAC system to the bedrooms during the day produced only small savings...functions of a building and minimizing the energy usage through optimization . It includes thermostats, time switches, programmable con- trollers...microprocessor systems, computers, and sensing devices that are linked with control and power components to manage energy use. This system optimizes load

The Department of Defense Very High Speed Integrated Circuit (VHSIC) Technology Availability Program Plan for the Committees on Armed Services United States Congress.

DTIC Science & Technology

1986-06-30

features of computer aided design systems and statistical quality control procedures that are generic to chip sets and processes. RADIATION HARDNESS -The...System PSP Programmable Signal Processor SSI Small Scale Integration ." TOW Tube Launched, Optically Tracked, Wire Guided TTL Transistor Transitor Logic

47 CFR 95.627 - MedRadio transmitters in the 401-406 MHz band.

Code of Federal Regulations, 2012 CFR

2012-10-01

... the MedRadio programmer/control transmitter monitoring system antenna gain relative to an isotropic... level must be increased or decreased by an amount equal to the monitoring system antenna gain above or below the gain of an isotropic antenna, respectively. (4) If no signal in a MedRadio channel above the...

47 CFR 95.627 - MedRadio transmitters in the 401-406 MHz band.

Code of Federal Regulations, 2013 CFR

2013-10-01

... the MedRadio programmer/control transmitter monitoring system antenna gain relative to an isotropic... level must be increased or decreased by an amount equal to the monitoring system antenna gain above or below the gain of an isotropic antenna, respectively. (4) If no signal in a MedRadio channel above the...

47 CFR 95.627 - MedRadio transmitters in the 401-406 MHz band.

Code of Federal Regulations, 2014 CFR

2014-10-01

... the MedRadio programmer/control transmitter monitoring system antenna gain relative to an isotropic... level must be increased or decreased by an amount equal to the monitoring system antenna gain above or below the gain of an isotropic antenna, respectively. (4) If no signal in a MedRadio channel above the...

A situational analysis of pharmacovigilance plans in the Global Fund Malaria and U.S. President's Malaria Initiative proposals.

PubMed

Stergachis, Andy; Bartlein, Rebecca J K; Dodoo, Alexander; Nwokike, Jude; Kachur, S Patrick

2010-05-30

Pharmacovigilance programmes can monitor and help ensure the safe use of medicines that are critical to the success of global public health programmes. The widespread deployment of artemisinin-based combination therapy (ACT) by national malaria control programmes as part of the overall Global Malaria Action Plan for malaria control to elimination and eradication makes ACT an excellent candidate for pharmacovigilance activities. In 2008, The Roll Back Malaria partnership issued guidelines for inclusion of pharmacovigilance in Global Fund and other related proposals. In light of this recommendation and the rapid scale-up of ACT worldwide, an analysis of Global Fund Round 8 proposals and the President's Malaria Initiative (PMI) 2009 Malaria Operational Plans was conducted to assess if and how pharmacovigilance has been incorporated into countries' national malaria plans and donor budget requests. The Global Fund-Malaria Round 8 proposals for the 26 countries and the PMI Malaria Operational Plans (MOPs) for fiscal year 2009 for the 15 countries that were approved and received funding from either the Global Fund-Malaria Round 8 or PMI were accessed through the programme websites. The analysis consisted of conducting word counts and key word in context analyses of each proposal and plan. Twelve out of 26 (46%) of the Global Fund proposals mentioned that established pharmacovigilance systems were present in their countries. Four of the fifteen PMI MOPs (27%) mentioned that established pharmacovigilance systems were present in their countries. Only seven of the 26 (27%) Global Fund proposals included a request for funding for new or current pharmacovigilance activities. Seven of 15 (47%) MOPs included a request for funding for pharmacovigilance activities. There were relatively few requests for funding for pharmacovigilance activities, demonstrating a lack of emphasis placed on pharmacovigilance systems in recipient countries. The findings stress the need for more active direction to strengthen active surveillance and passive adverse event reporting systems to augment the issuance of guidance documents.

Advances in the diagnosis of bovine besnoitiosis: current options and applications for control.

PubMed

Gutiérrez-Expósito, Daniel; Ferre, Ignacio; Ortega-Mora, Luis M; Álvarez-García, Gema

2017-10-01

Bovine besnoitiosis, which is caused by the tissue cyst-forming intracellular parasite Besnoitia besnoiti, is a chronic and debilitating disease that is responsible for severe economic losses in the cattle raised under extensive husbandry systems. The absence of vaccines, treatments or a health scheme at local, national and international levels has led to a rapid spread of bovine besnoitiosis from western Europe towards eastern countries and northwards. Moreover, this parasitic disease is widely present in many sub-Saharan countries. Thus, bovine besnoitiosis should be included in the animal health scheme of beef cattle herds. Accurate diagnostic tools and common diagnostic procedures are mandatory in any control programme. Relevant advances have been made in this field during the last decade. Succeeding with accurate diagnosis relies on the technique employed and the antibody and parasite kinetics of the infection stage, which may notably influence control programmes and surveillance. Moreover, control programmes should be adapted to the epidemiological status of the disease, as the disease presentation in a herd has important implications for prospective control. Herein, we review the clinical disease presentation of bovine besnoitiosis and the correlation between its clinical course and laboratory parameters. We also provide an update on the available diagnostic tools, discuss their strengths and pitfalls, and provide guidelines for their use in control, surveillance and epidemiological studies. A rational control strategy is also recommended. Copyright © 2017 Australian Society for Parasitology. Published by Elsevier Ltd. All rights reserved.

System and method for acquisition management of subject position information

DOEpatents

Carrender, Curt

2005-12-13

A system and method for acquisition management of subject position information that utilizes radio frequency identification (RF ID) to store position information in position tags. Tag programmers receive position information from external positioning systems, such as the Global Positioning System (GPS), from manual inputs, such as keypads, or other tag programmers. The tag programmers program each position tag with the received position information. Both the tag programmers and the position tags can be portable or fixed. Implementations include portable tag programmers and fixed position tags for subject position guidance, and portable tag programmers for collection sample labeling. Other implementations include fixed tag programmers and portable position tags for subject route recordation. Position tags can contain other associated information such as destination address of an affixed subject for subject routing.

System and method for acquisition management of subject position information

DOEpatents

Carrender, Curt [Morgan Hill, CA

2007-01-23

A system and method for acquisition management of subject position information that utilizes radio frequency identification (RF ID) to store position information in position tags. Tag programmers receive position information from external positioning systems, such as the Global Positioning System (GPS), from manual inputs, such as keypads, or other tag programmers. The tag programmers program each position tag with the received position information. Both the tag programmers and the position tags can be portable or fixed. Implementations include portable tag programmers and fixed position tags for subject position guidance, and portable tag programmers for collection sample labeling. Other implementations include fixed tag programmers and portable position tags for subject route recordation. Position tags can contain other associated information such as destination address of an affixed subject for subject routing.

Tuner control system of Spoke012 SRF cavity for C-ADS injector I

NASA Astrophysics Data System (ADS)

Liu, Na; Sun, Yi; Wang, Guang-Wei; Mi, Zheng-Hui; Lin, Hai-Ying; Wang, Qun-Yao; Liu, Rong; Ma, Xin-Peng

2016-09-01

A new tuner control system for spoke superconducting radio frequency (SRF) cavities has been developed and applied to cryomodule I of the C-ADS injector I at the Institute of High Energy Physics, Chinese Academy of Sciences. We have successfully implemented the tuner controller based on Programmable Logic Controller (PLC) for the first time and achieved a cavity tuning phase error of ±0.7° (about ±4 Hz peak to peak) in the presence of electromechanical coupled resonance. This paper presents preliminary experimental results based on the PLC tuner controller under proton beam commissioning. Supported by Proton linac accelerator I of China Accelerator Driven sub-critical System (Y12C32W129)

Reducing musculoskeletal injury and concussion risk in schoolboy rugby players with a pre-activity movement control exercise programme: a cluster randomised controlled trial

PubMed Central

Hislop, Michael D; Stokes, Keith A; Williams, Sean; McKay, Carly D; England, Mike E; Kemp, Simon P T; Trewartha, Grant

2017-01-01

Background Injury risk in youth rugby has received much attention, highlighting the importance of establishing evidence-based injury reduction strategies. Aim To determine the efficacy of a movement control exercise programme in reducing injuries in youth rugby players and to investigate the effect of programme dose on injury measures. Methods In a cluster-randomised controlled trial, 40 independent schools (118 teams, 3188 players aged 14–18 years) were allocated to receive either the intervention or a reference programme, both of which were to be delivered by school coaches. The intervention comprised balance training, whole-body resistance training, plyometric training, and controlled rehearsal of landing and cutting manoeuvres. Time-loss (>24 hours) injuries arising from school rugby matches were recorded by coaches and medical staff. Results 441 time-loss match injuries (intervention, 233; control, 208) were reported across 15 938 match exposure-hours (intervention, 9083; control, 6855). Intention-to-treat results indicated unclear effects of trial arm on overall match injury incidence (rate ratio (RR)=0.85, 90% confidence limits 0.61 to 1.17), although clear reductions were evident in the intervention arm for concussion incidence (RR=0.71, 0.48 to 1.05). When trial arm comparisons were limited to teams who had completed three or more weekly programme sessions on average, clear reductions in overall match injury incidence (RR=0.28, 0.14 to 0.51) and concussion incidence (RR=0.41, 0.17 to 0.99) were noted in the intervention group. Conclusion A preventive movement control exercise programme can reduce match injury outcomes, including concussion, in schoolboy rugby players when compared with a standardised control exercise programme, although to realise the greatest effects players should complete the programme at least three times per week. PMID:28515056

Reducing musculoskeletal injury and concussion risk in schoolboy rugby players with a pre-activity movement control exercise programme: a cluster randomised controlled trial.

PubMed

Hislop, Michael D; Stokes, Keith A; Williams, Sean; McKay, Carly D; England, Mike E; Kemp, Simon P T; Trewartha, Grant

2017-08-01

Injury risk in youth rugby has received much attention, highlighting the importance of establishing evidence-based injury reduction strategies. To determine the efficacy of a movement control exercise programme in reducing injuries in youth rugby players and to investigate the effect of programme dose on injury measures. In a cluster-randomised controlled trial, 40 independent schools (118 teams, 3188 players aged 14-18 years) were allocated to receive either the intervention or a reference programme, both of which were to be delivered by school coaches. The intervention comprised balance training, whole-body resistance training, plyometric training, and controlled rehearsal of landing and cutting manoeuvres. Time-loss (>24 hours) injuries arising from school rugby matches were recorded by coaches and medical staff. 441 time-loss match injuries (intervention, 233; control, 208) were reported across 15 938 match exposure-hours (intervention, 9083; control, 6855). Intention-to-treat results indicated unclear effects of trial arm on overall match injury incidence (rate ratio (RR)=0.85, 90% confidence limits 0.61 to 1.17), although clear reductions were evident in the intervention arm for concussion incidence (RR=0.71, 0.48 to 1.05). When trial arm comparisons were limited to teams who had completed three or more weekly programme sessions on average, clear reductions in overall match injury incidence (RR=0.28, 0.14 to 0.51) and concussion incidence (RR=0.41, 0.17 to 0.99) were noted in the intervention group. A preventive movement control exercise programme can reduce match injury outcomes, including concussion, in schoolboy rugby players when compared with a standardised control exercise programme, although to realise the greatest effects players should complete the programme at least three times per week. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

The use of temperature programmable flow tubes for the study of atmospheric aerosols

NASA Astrophysics Data System (ADS)

Khalizov, A.; Sloan, J. J.

2003-04-01

In order to understand the response of atmospheric aerosols to changes they encounter in the natural atmosphere, it is usually necessary to observe models of these aerosol systems under carefully controlled laboratory conditions. This is particularly difficult for the condensed phase, for which agglomeration, gas-particle exchange and gravitational settling affect the composition and limit the observation time. Traditionally, studies of this kind have been carried out in large static chambers and flow tubes. While large chambers provide relatively long observations times, they afford the experimenter less direct control over the environment of the particles. Flow tubes, on the other hand provide very precise control of the experimental conditions, but a much shorter contact time. We have used temperature programmable flow tubes for the past decade to study the composition, size and phase changes that occur when aerosols are exposed to variations in the temperature and composition of the surrounding atmosphere. In many cases, our measurements also yield accurate rate constants for the nucleation of solids in liquid droplets. In this presentation, we will illustrate the capabilities of this method using results obtained from a new temperature programmable flow tube recently built in our laboratory.

FPGA Control System for the Automated Test of Microshutters

NASA Technical Reports Server (NTRS)

Lyness, Eric; Rapchun, David A.; Moseley, S. Harvey

2008-01-01

The James Webb Space Telescope, scheduled to replace the Hubble in 2013, must simultaneously observe hundreds of faint galaxies. This requirement has led to the development of a programmable transmission mask which can be adapted to admit light with arbitrary pattern of galaxies into its spectrograph. This programmable mask will contain a large array of micro-electromechanical (MEMs) devices called MicroShutters. These microscopic shutters physically open and close like the shutter on a camera, except each shutter is microscopic in size and an array 365 by 171 is used to select the objects under spectroscopic observation at a given time, and to block the unwanted background light from other areas. NASA developed and is currently refining the exceptionally difficult process of manufacturing these shutters. This paper describes how the authors used LabVIEW FPGA and a reconfigurable I/O board to control the shutters in a test chamber and how the flexibility of the system allows us to continue to modify the control algorithms as NASA optimizes the performance of the MicroShutter arrays.

FPGA Control System for the Automated Test of MicroShutters

NASA Technical Reports Server (NTRS)

Lyness, Eric; Rapchun, David A.; Moseley, S. Harvey

2008-01-01

The James Webb Space Telescope, scheduled to replace the Hubble in 2013, must simultaneously observe hundreds of faint galaxies. This requirement has led to the development of a programmable transmission mask which can be adapted to admit light from an arbitrary pattern of galaxies into its spectrograph. This programmable mask will contain a large array of micro-electromechanical (MEMs) devices called MicroShutters. These microscopic shutters physically open and close like the shutter on a camera, except each shutter is microscopic in size and an array 365 by 171 is used to select the objects under spectroscopic observation at a given time, and to block the unwanted background light from other areas. NASA developed and is currently refining the exceptionally difficult process of manufacturing these shutters. This paper describes how the authors used LabVIEW FPGA and a reconfigurable I/O board to control the shutters in a test chamber and how the flexibility of the system allows us to continue to modify the control algorithms as NASA optimizes the performance of the MicroShutter arrays.

A survey on auditing, quality assurance systems and legal frameworks in five selected slaughterhouses in Bulawayo, south-western Zimbabwe.

PubMed

Masanganise, Kaurai E; Matope, Gift; Pfukenyi, Davies M

2013-01-01

The purpose of this study was to explore the audits, quality assurance (QA) programmes and legal frameworks used in selected abattoirs in Zimbabwe and slaughterhouse workers' perceptions on their effectiveness. Data on slaughterhouse workers was gathered through a self-completed questionnaire and additional information was obtained from slaughterhouse and government records. External auditing was conducted mainly by the Department of Veterinary Public Health with little contribution from third parties. Internal auditing was restricted to export abattoirs. The checklist used on auditing lacked objective assessment criteria and respondents cited several faults in the current audit system. Most respondents (> 50.0%) knew the purposes and benefits of audit and QA inspections. All export abattoirs had QA programmes such as hazard analysis critical control point and ISO 9001 (a standard used to certify businesses' quality management systems) but their implementation varied from minimal to nil. The main regulatory defect observed was lack of requirements for a QA programme. Audit and quality assurance communications to the selected abattoirs revealed a variety of non-compliances with most respondents revealing that corrective actions to audit (84.3%) and quality assurance (92.3%) shortfalls were not done. A high percentage of respondents indicated that training on quality (76.8%) and regulations (69.8%) was critical. Thus, it is imperative that these abattoirs develop a food safety management system comprising of QA programmes, a microbial assessment scheme, regulatory compliance, standard operating procedures, internal and external auditing and training of workers.

Inclusion of persons with disabilities in systems of social protection: a population-based survey and case-control study in Peru.

PubMed

Bernabe-Ortiz, Antonio; Diez-Canseco, Francisco; Vasquez, Alberto; Kuper, Hannah; Walsham, Matthew; Blanchet, Karl

2016-08-26

This study aims to assess the needs of people with disabilities and their level of inclusion in social protection programmes. Population based-survey with a nested case-control study. Morropon, a semiurban district located in Piura, northern Peru. For the population survey, a two-stage sampling method was undertaken using data from the most updated census available and information of each household member aged ≥5 years was collected. In the nested case-control study, only one participant, case or control, per household was included in the study. Disability was screened using the Washington Group short questionnaire. A case, defined as an individual aged ≥5 years with disabilities, was matched with one control without disabilities by sex and age (±5 years). Information was collected on socioeconomic status, education, health and rehabilitation and social protection participation. The survey included 3684 participants, 1848 (50.1%) females, mean age: 36.4 (SD: 21.7). A total of 290 participants (7.9%; 95% CI 7.0% to 8.7%) were classified as having disability. Adults with disabilities were more likely to be single (OR=3.40; 95% CI 1.54 to 7.51) and not to be working (OR=4.36; 95% CI 2.26 to 8.40), while those who did work were less likely to receive the national minimum wage (ie, 750 PEN or about US$265; p=0.007). People with disabilities were more likely to experience health problems. There was no difference between those enrolled in any social protection programme among participants with and without disabilities. People with disabilities were found to have higher needs for social protection, but were not more likely to be enrolled in social protection programmes. The Peruvian social protection system should consider adding disability status to selection criteria in their cash transfer programmes as well as implementing disability-specific interventions. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Controlling CAMAC instrumentation through the USB port

NASA Astrophysics Data System (ADS)

Ribas, R. V.

2012-02-01

A programmable device to interface CAMAC instrumentation to the USB port of computers, without the need of heavy, noisy and expensive CAMAC crates is described in this article. Up to four single-width modules can be used. Also, all software necessary for a multi-parametric data acquisition system was developed. A standard crate-controller based on the same project is being designed.

Facilitating Energy Savings through Enhanced Usability of Thermostats

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meier, Alan; Aragon, Cecilia; Peffer, Therese

2011-05-23

Residential thermostats play a key role in controlling heating and cooling systems. Occupants often find the controls of programmable thermostats confusing, sometimes leading to higher heating consumption than when the buildings are controlled manually. A high degree of usability is vital to a programmable thermostat's effectiveness because, unlike a more efficient heating system, occupants must engage in specific actions after installation to obtain energy savings. We developed a procedure for measuring the usability of thermostats and tested this methodology with 31 subjects on five thermostats. The procedure requires first identifying representative tasks associated with the device and then testing themore » subjects ability to accomplish those tasks. The procedure was able to demonstrate the subjects wide ability to accomplish tasks and the influence of a device's usability on success rates. A metric based on the time to accomplish the tasks and the fraction of subjects actually completing the tasks captured the key aspects of each thermostat's usability. The procedure was recently adopted by the Energy Star Program for its thermostat specification. The approach appears suitable for quantifying usability of controls in other products, such as heat pump water heaters and commercial lighting.« less

A Secure and Reliable High-Performance Field Programmable Gate Array for Information Processing

DTIC Science & Technology

2012-03-01

receives a data token from its control input (shown as a horizontal arrow above). The value of this data token is used to select an input port. The input...dual of a merge. It receives a data token from its control input (shown as a horizontal arrow above). The value of this data token is used to select...Transactions on Computer-Aided Design of Intergrated Circuits and Systems, Vol. 26, No. 2, February 2007. [12] Cadence Design Systems, “Clock Domain

"CAN Stop"--implementation and evaluation of a secondary group prevention for adolescent and young adult cannabis users in various contexts--study protocol.

PubMed

Baldus, Christiane; Miranda, Alejandra; Weymann, Nina; Reis, Olaf; Moré, Kerstin; Thomasius, Rainer

2011-04-18

Current research shows that overall numbers for cannabis use among adolescents and young adults dropped in recent years. However, this trend is much less pronounced in continuous cannabis use. With regard to the heightened risk for detrimental health- and development-related outcomes, adolescents and young adults with continuous cannabis use need special attention. The health services structure for adolescents and young adults with substance related problems in Germany, is multifaceted, because different communal, medical and judicial agencies are involved. This results in a rather decentralized organizational structure of the help system. This and further system-inherent characteristics make the threshold for young cannabis users rather high. Because of this, there is a need to establish evidence-based low-threshold help options for young cannabis users, which can be easily disseminated. Therefore, a training programme for young cannabis users (age 14-21) was developed in the "CAN Stop" project. Within the project, we seek to implement and evaluate the training programme within different institutions of the help system. The evaluation is sensitive to the different help systems and their specific prerequisites. Moreover, within this study, we also test the practicability of a training provision through laypersons. The CAN Stop study is a four-armed randomized wait-list controlled trial. The four arms are needed for the different help system settings, in which the CAN Stop training programme is evaluated: (a) the drug addiction aid and youth welfare system, (b) the out-patient medical system, (c) the in-patient medical system and (d) prisons for juvenile offenders. Data are collected at three points, before and after the training or a treatment as usual, and six months after the end of either intervention. The CAN Stop study is expected to provide an evidence-based programme for young cannabis users seeking to reduce or quit their cannabis use. Moreover, we seek to gain knowledge about the programme's utility within different settings of the German help system for young cannabis users and information about the settings' specific clientele. The study protocol is discussed with regard to potential difficulties within the different settings. ISRCTN: ISRCTN57036983.

A falls prevention programme to improve quality of life, physical function and falls efficacy in older people receiving home help services: study protocol for a randomised controlled trial.

PubMed

Bjerk, Maria; Brovold, Therese; Skelton, Dawn A; Bergland, Astrid

2017-08-14

Falls and fall-related injuries in older adults are associated with great burdens, both for the individuals, the health care system and the society. Previous research has shown evidence for the efficiency of exercise as falls prevention. An understudied group are older adults receiving home help services, and the effect of a falls prevention programme on health-related quality of life is unclear. The primary aim of this randomised controlled trial is to examine the effect of a falls prevention programme on quality of life, physical function and falls efficacy in older adults receiving home help services. A secondary aim is to explore the mediating factors between falls prevention and health-related quality of life. The study is a single-blinded randomised controlled trial. Participants are older adults, aged 67 or older, receiving home help services, who are able to walk with or without walking aids, who have experienced at least one fall during the last 12 months and who have a Mini Mental State Examination of 23 or above. The intervention group receives a programme, based on the Otago Exercise Programme, lasting 12 weeks including home visits and motivational telephone calls. The control group receives usual care. The primary outcome is health-related quality of life (SF-36). Secondary outcomes are leg strength, balance, walking speed, walking habits, activities of daily living, nutritional status and falls efficacy. All measurements are performed at baseline, following intervention at 3 months and at 6 months' follow-up. Sample size, based on the primary outcome, is set to 150 participants randomised into the two arms, including an estimated 15-20% drop out. Participants are recruited from six municipalities in Norway. This trial will generate new knowledge on the effects of an exercise falls prevention programme among older fallers receiving home help services. This knowledge will be useful for clinicians, for health managers in the primary health care service and for policy makers. ClinicalTrials.gov . NCT02374307 . First registration, 16/02/2015.

Coding the Assembly of Polyoxotungstates with a Programmable Reaction System.

PubMed

Ruiz de la Oliva, Andreu; Sans, Victor; Miras, Haralampos N; Long, De-Liang; Cronin, Leroy

2017-05-01

Chemical transformations are normally conducted in batch or flow mode, thereby allowing the chemistry to be temporally or spatially controlled, but these approaches are not normally combined dynamically. However, the investigation of the underlying chemistry masked by the self-assembly processes that often occur in one-pot reactions and exploitation of the potential of complex chemical systems requires control in both time and space. Additionally, maintaining the intermediate constituents of a self-assembled system "off equilibrium" and utilizing them dynamically at specific time intervals provide access to building blocks that cannot coexist under one-pot conditions and ultimately to the formation of new clusters. Herein, we implement the concept of a programmable networked reaction system, allowing us to connect discrete "one-pot" reactions that produce the building block{W 11 O 38 } ≡ {W 11 } under different conditions and control, in real time, the assembly of a series of polyoxometalate clusters {W 12 O 42 } ≡ {W 12 }, {W 22 O 74 } ≡ {W 22 } 1a, {W 34 O 116 } ≡ {W 34 } 2a, and {W 36 O 120 } ≡ {W 36 } 3a, using pH and ultraviolet-visible monitoring. The programmable networked reaction system reveals that is possible to assemble a range of different clusters using {W 11 }-based building blocks, demonstrating the relationship between the clusters within the family of iso-polyoxotungstates, with the final structural motif being entirely dependent on the building block libraries generated in each separate reaction space within the network. In total, this approach led to the isolation of five distinct inorganic clusters using a "fixed" set of reagents and using a fully automated sequence code, rather than five entirely different reaction protocols. As such, this approach allows us to discover, record, and implement complex one-pot reaction syntheses in a more general way, increasing the yield and reproducibility and potentially giving access to nonspecialists.

Coding the Assembly of Polyoxotungstates with a Programmable Reaction System

PubMed Central

2017-01-01

Chemical transformations are normally conducted in batch or flow mode, thereby allowing the chemistry to be temporally or spatially controlled, but these approaches are not normally combined dynamically. However, the investigation of the underlying chemistry masked by the self-assembly processes that often occur in one-pot reactions and exploitation of the potential of complex chemical systems requires control in both time and space. Additionally, maintaining the intermediate constituents of a self-assembled system “off equilibrium” and utilizing them dynamically at specific time intervals provide access to building blocks that cannot coexist under one-pot conditions and ultimately to the formation of new clusters. Herein, we implement the concept of a programmable networked reaction system, allowing us to connect discrete “one-pot” reactions that produce the building block{W11O38} ≡ {W11} under different conditions and control, in real time, the assembly of a series of polyoxometalate clusters {W12O42} ≡ {W12}, {W22O74} ≡ {W22} 1a, {W34O116} ≡ {W34} 2a, and {W36O120} ≡ {W36} 3a, using pH and ultraviolet–visible monitoring. The programmable networked reaction system reveals that is possible to assemble a range of different clusters using {W11}-based building blocks, demonstrating the relationship between the clusters within the family of iso-polyoxotungstates, with the final structural motif being entirely dependent on the building block libraries generated in each separate reaction space within the network. In total, this approach led to the isolation of five distinct inorganic clusters using a “fixed” set of reagents and using a fully automated sequence code, rather than five entirely different reaction protocols. As such, this approach allows us to discover, record, and implement complex one-pot reaction syntheses in a more general way, increasing the yield and reproducibility and potentially giving access to nonspecialists. PMID:28414229

Programmable data communications controller requirements

NASA Technical Reports Server (NTRS)

1977-01-01

The design requirements for a Programmable Data Communications Controller (PDCC) that reduces the difficulties in attaching data terminal equipment to a computer are presented. The PDCC is an interface between the computer I/O channel and the bit serial communication lines. Each communication line is supported by a communication port that handles all line control functions and performs most terminal control functions. The port is fabricated on a printed circuit board that plugs into a card chassis, mating with a connector that is joined to all other card stations by a data bus. Ports are individually programmable; each includes a microprocessor, a programmable read-only memory for instruction storage, and a random access memory for data storage.

Comparison of two different rehabilitation programmes for thrust plate prosthesis: a randomized controlled study.

PubMed

Unver, Bayram; Karatosun, Vasfi; Gunal, Izge; Angin, Salih

2004-02-01

Weight bearing after total hip arthroplasty is postponed in order to prevent early loosening, but this negatively affects the rehabilitation programme. For the force transfer characteristics of thrust plate prosthesis (TPP), a new type of hip prosthesis used without cement is similar to the normal hip. We evaluated the possibilities of early weight bearing after TPP by comparing early partial with early full weight bearing. Randomized controlled study. Department of orthopaedics and traumatology in a university hospital. Sixty hips of 51 patients who underwent total hip arthroplasty with TPP were randomly assigned into two groups. Both groups received accelerated rehabilitation programmes: group 1 with early partial weight bearing and group 2 with early full weight bearing. Patients were evaluated by a blind observer preoperatively, at three months after surgery by clinical (measurement of range of hip motion (universal goniometry), muscle strength (Manual Muscle Test), functional test (6-minute walk test), hip function (Harris Hip Scoring System)) and radiographical parameters and one year after surgery by clinical (Harris Hip Scoring System) and radiographical parameters. Group 2 performed transfer activities earlier, had more walking distance at the time of discharge and shorter hospital stay than group 1. At three months, Harris Hip Score, muscle strength, 6-minute walk test, and duration of crutch use were significantly (p < 0.05) in favour of group 2. None of the patients in either group showed signs of loosening one year after the operation. These results suggest that patients with TPP can tolerate an accelerated rehabilitation programme with early weight bearing and will gain the goals of rehabilitation earlier.

Programmable phase plate for tool modification in laser machining applications

DOEpatents

Thompson Jr., Charles A.; Kartz, Michael W.; Brase, James M.; Pennington, Deanna; Perry, Michael D.

2004-04-06

A system for laser machining includes a laser source for propagating a laser beam toward a target location, and a spatial light modulator having individual controllable elements capable of modifying a phase profile of the laser beam to produce a corresponding irradiance pattern on the target location. The system also includes a controller operably connected to the spatial light modulator for controlling the individual controllable elements. By controlling the individual controllable elements, the phase profile of the laser beam may be modified into a desired phase profile so as to produce a corresponding desired irradiance pattern on the target location capable of performing a machining operation on the target location.

Towards an autonomous telescope system: the Test-Bed Telescope project

NASA Astrophysics Data System (ADS)

Racero, E.; Ocaña, F.; Ponz, D.; the TBT Consortium

2015-05-01

In the context of the Space Situational Awareness (SSA) programme of ESA, it is foreseen to deploy several large robotic telescopes in remote locations to provide surveillance and tracking services for man-made as well as natural near-Earth objects (NEOs). The present project, termed Telescope Test Bed (TBT) is being developed under ESA's General Studies and Technology Programme, and shall implement a test-bed for the validation of an autonomous optical observing system in a realistic scenario, consisting of two telescopes located in Spain and Australia, to collect representative test data for precursor NEO services. It is foreseen that this test-bed environment will be used to validate future prototype software systems as well as to evaluate remote monitoring and control techniques. The test-bed system will be capable to deliver astrometric and photometric data of the observed objects in near real-time. This contribution describes the current status of the project.

Monitoring and surveillance for multiple micronutrient supplements in pregnancy.

PubMed

Mei, Zuguo; Jefferds, Maria Elena; Namaste, Sorrel; Suchdev, Parminder S; Flores-Ayala, Rafael C

2017-12-22

The World Health Organization (WHO) recommends iron-folic acid (IFA) supplementation during pregnancy to improve maternal and infant health outcomes. Multiple micronutrient (MMN) supplementation in pregnancy has been implemented in select countries and emerging evidence suggests that MMN supplementation in pregnancy may provide additional benefits compared to IFA alone. In 2015, WHO, the United Nations Children's Fund (UNICEF), and the Micronutrient Initiative held a "Technical Consultation on MMN supplements in pregnancy: implementation considerations for successful incorporation into existing programmemes," which included a call for indicators needed for monitoring, evaluation, and surveillance of MMN supplementation programmes. Currently, global surveillance and monitoring data show that overall IFA supplementation programmes suffer from low coverage and intake adherence, despite inclusion in national policies. Common barriers that limit the effectiveness of IFA-which also apply to MMN programmes-include weak supply chains, low access to antenatal care services, low-quality behaviour change interventions to support and motivate women, and weak or non-existent monitoring systems used for programme improvement. The causes of these barriers in a given country need careful review to resolve them. As countries heighten their focus on supplementation during pregnancy, or if they decide to initiate or transition into MMN supplementation, a priority is to identify key monitoring indicators to address these issues and support effective programmes. National and global monitoring and surveillance data on IFA supplementation during pregnancy are primarily derived from cross-sectional surveys and, on a more routine basis, through health and logistics management information systems. Indicators for IFA supplementation exist; however, the new indicators for MMN supplementation need to be incorporated. We reviewed practice-based evidence, guided by the WHO/Centers for Disease Control and Prevention logic model for vitamin and mineral interventions in public health programmes, and used existing manuals, published literature, country reports, and the opinion of experts, to identify monitoring, evaluation, and surveillance indicators for MMN supplementation programmes. We also considered cross-cutting indicators that could be used across programme settings, as well as those specific to common delivery models, such as antenatal care services. We then described mechanisms for collecting these data, including integration within existing government monitoring systems, as well as other existing or proposed systems. Monitoring data needs at all stages of the programme lifecycle were considered, as well as the feasibility and cost of data collection. We also propose revisions to global-, national-, and subnational-surveillance indicators based on these reviews. © 2018 John Wiley & Sons Ltd.

Adaptive Proactive Inhibitory Control for Embedded Real-Time Applications

PubMed Central

Yang, Shufan; McGinnity, T. Martin; Wong-Lin, KongFatt

2012-01-01

Psychologists have studied the inhibitory control of voluntary movement for many years. In particular, the countermanding of an impending action has been extensively studied. In this work, we propose a neural mechanism for adaptive inhibitory control in a firing-rate type model based on current findings in animal electrophysiological and human psychophysical experiments. We then implement this model on a field-programmable gate array (FPGA) prototyping system, using dedicated real-time hardware circuitry. Our results show that the FPGA-based implementation can run in real-time while achieving behavioral performance qualitatively suggestive of the animal experiments. Implementing such biological inhibitory control in an embedded device can lead to the development of control systems that may be used in more realistic cognitive robotics or in neural prosthetic systems aiding human movement control. PMID:22701420

Implementation of Adaptive Digital Controllers on Programmable Logic Devices

NASA Technical Reports Server (NTRS)

Gwaltney, David A.; King, Kenneth D.; Smith, Keary J.; Ormsby, John (Technical Monitor)

2002-01-01

Much has been made of the capabilities of FPGA's (Field Programmable Gate Arrays) in the hardware implementation of fast digital signal processing (DSP) functions. Such capability also makes and FPGA a suitable platform for the digital implementation of closed loop controllers. There are myriad advantages to utilizing an FPGA for discrete-time control functions which include the capability for reconfiguration when SRAM- based FPGA's are employed, fast parallel implementation of multiple control loops and implementations that can meet space level radiation tolerance in a compact form-factor. Other researchers have presented the notion that a second order digital filter with proportional-integral-derivative (PID) control functionality can be implemented in an FPGA. At Marshall Space Flight Center, the Control Electronics Group has been studying adaptive discrete-time control of motor driven actuator systems using digital signal processor (DSF) devices. Our goal is to create a fully digital, flight ready controller design that utilizes an FPGA for implementation of signal conditioning for control feedback signals, generation of commands to the controlled system, and hardware insertion of adaptive control algorithm approaches. While small form factor, commercial DSP devices are now available with event capture, data conversion, pulse width modulated outputs and communication peripherals, these devices are not currently available in designs and packages which meet space level radiation requirements. Meeting our goals requires alternative compact implementation of such functionality to withstand the harsh environment encountered on spacecraft. Radiation tolerant FPGA's are a feasible option for reaching these goals.

Multichannel optical sensing device

DOEpatents

Selkowitz, S.E.

1985-08-16

A multichannel optical sensing device is disclosed, for measuring the outdoor sky luminance or illuminance or the luminance or illuminance distribution in a room, comprising a plurality of light receptors, an optical shutter matrix including a plurality of liquid crystal optical shutter elements operable by electrical control signals between light transmitting and light stopping conditions, fiber optical elements connected between the receptors and the shutter elements, a microprocessor based programmable control unit for selectively supplying control signals to the optical shutter elements in a programmable sequence, a photodetector including an optical integrating spherical chamber having an input port for receiving the light from the shutter matrix and at least one detector element in the spherical chamber for producing output signals corresponding to the light, and output units for utilizing the output signals including a storage unit having a control connection to the microprocessor based programmable control unit for storing the output signals under the sequence control of the programmable control unit.

Multichannel optical sensing device

DOEpatents

Selkowitz, Stephen E.

1990-01-01

A multichannel optical sensing device is disclosed, for measuring the outr sky luminance or illuminance or the luminance or illuminance distribution in a room, comprising a plurality of light receptors, an optical shutter matrix including a plurality of liquid crystal optical shutter elements operable by electrical control signals between light transmitting and light stopping conditions, fiber optic elements connected between the receptors and the shutter elements, a microprocessor based programmable control unit for selectively supplying control signals to the optical shutter elements in a programmable sequence, a photodetector including an optical integrating spherical chamber having an input port for receiving the light from the shutter matrix and at least one detector element in the spherical chamber for producing output signals corresponding to the light, and output units for utilizing the output signals including a storage unit having a control connection to the microprocessor based programmable control unit for storing the output signals under the sequence control of the programmable control unit.

A low-level rf control system for a quarter-wave resonator

NASA Astrophysics Data System (ADS)

Kim, Jongwon; Hwang, Churlkew

2012-06-01

A low-level rf control system was designed and built for an rf deflector, which is a quarter wave resonator, and was designed to deflect a secondary electron beam to measure the bunch length of an ion beam. The deflector has a resonance frequency near 88 MHz, its required phase stability is approximately ±1° and its amplitude stability is less than ±1%. The control system consists of analog input and output components and a digital system based on a field-programmable gate array for signal processing. The system is cost effective, while meeting the stability requirements. Some basic properties of the control system were measured. Then, the capability of the rf control was tested using a mechanical vibrator made of a dielectric rod attached to an audio speaker system, which could induce regulated perturbations in the electric fields of the resonator. The control system was flexible so that its parameters could be easily configured to compensate for the disturbance induced in the resonator.

Effectiveness of a group diabetes education programme in underserved communities in South Africa: pragmatic cluster randomized control trial.

PubMed

Mash, Bob; Levitt, Naomi; Steyn, Krisela; Zwarenstein, Merrick; Rollnick, Stephen

2012-12-24

Diabetes is an important contributor to the burden of disease in South Africa and prevalence rates as high as 33% have been recorded in Cape Town. Previous studies show that quality of care and health outcomes are poor. The development of an effective education programme should impact on self-care, lifestyle change and adherence to medication; and lead to better control of diabetes, fewer complications and better quality of life. Pragmatic cluster randomized controlled trialParticipants: Type 2 diabetic patients attending 45 public sector community health centres in Cape TownInterventions: The intervention group will receive 4 sessions of group diabetes education delivered by a health promotion officer in a guiding style. The control group will receive usual care which consists of ad hoc advice during consultations and occasional educational talks in the waiting room. To evaluate the effectiveness of the group diabetes education programmeOutcomes: diabetes self-care activities, 5% weight loss, 1% reduction in HbA1c. self-efficacy, locus of control, mean blood pressure, mean weight loss, mean waist circumference, mean HbA1c, mean total cholesterol, quality of lifeRandomisation: Computer generated random numbersBlinding: Patients, health promoters and research assistants could not be blinded to the health centre's allocationNumbers randomized: Seventeen health centres (34 in total) will be randomly assigned to either control or intervention groups. A sample size of 1360 patients in 34 clusters of 40 patients will give a power of 80% to detect the primary outcomes with 5% precision. Altogether 720 patients were recruited in the intervention arm and 850 in the control arm giving a total of 1570. The study will inform policy makers and managers of the district health system, particularly in low to middle income countries, if this programme can be implemented more widely. Pan African Clinical Trial Registry PACTR201205000380384.

The efficacy of a movement control exercise programme to reduce injuries in youth rugby: a cluster randomised controlled trial

PubMed Central

Hislop, M D; Stokes, K A; Williams, S; McKay, C D; England, M; Kemp, S P T

2016-01-01

Background Injuries to youth rugby players have become an increasingly prominent health concern, highlighting the importance of developing and implementing appropriate preventive strategies. A growing body of evidence from other youth sports has demonstrated the efficacy of targeted exercise regimens to reduce injury risk. However, studies have yet to investigate the effect of such interventions in youth contact sport populations like rugby union. Objective To determine the efficacy of an evidence-based movement control exercise programme compared with a sham exercise programme to reduce injury risk in youth rugby players. Exercise programme compliance between trial arms and the effect of coach attitudes on compliance will also be evaluated. Setting School rugby coaches in England will be the target of the researcher intervention, with the effects of the injury prevention programmes being measured in male youth players aged 14–18 years in school rugby programmes over the 2015–2016 school winter term. Methods A cluster-randomised controlled trial with schools randomly allocated to either a movement control exercise programme or a sham exercise programme, both of which are coach-delivered. Injury measures will derive from field-based injury surveillance, with match and training exposure and compliance recorded. A questionnaire will be used to evaluate coach attitudes, knowledge, beliefs and behaviours both prior to and on the conclusion of the study period. Outcome measures Summary injury measures (incidence, severity and burden) will be compared between trial arms, as will the influence of coach attitudes on compliance and injury burden. Additionally, changes in these outcomes through using the exercise programmes will be evaluated. Trial registration number ISRTCNN13422001. PMID:27900148

Improving child nutrition and development through community-based childcare centres in Malawi - The NEEP-IE study: study protocol for a randomised controlled trial.

PubMed

Gelli, Aulo; Margolies, Amy; Santacroce, Marco; Sproule, Katie; Theis, Sophie; Roschnik, Natalie; Twalibu, Aisha; Chidalengwa, George; Cooper, Amrik; Moorhead, Tyler; Gladstone, Melissa; Kariger, Patricia; Kutundu, Mangani

2017-06-19

The Nutrition Embedded Evaluation Programme Impact Evaluation (NEEP-IE) study is a cluster randomised controlled trial designed to evaluate the impact of a childcare centre-based integrated nutritional and agricultural intervention on the diets, nutrition and development of young children in Malawi. The intervention includes activities to improve nutritious food production and training/behaviour-change communication to improve food intake, care and hygiene practices. This paper presents the rationale and study design for this randomised control trial. Sixty community-based childcare centres (CBCCs) in rural communities around Zomba district, Malawi, were randomised to either (1) a control group where children were attending CBCCs supported by Save the Children's Early Childhood Health and Development (ECD) programme, or (2) an intervention group where nutritional and agricultural support activities were provided alongside the routine provision of the Save the Children's ECD programme. Primary outcomes at child level include dietary intake (measured through 24-h recall), whilst secondary outcomes include child development (Malawi Development Assessment Tool (MDAT)) and nutritional status (anthropometric measurements). At household level, primary outcomes include smallholder farmer production output and crop-mix (recall of last production season). Intermediate outcomes along theorised agricultural and nutritional pathways were measured. During this trial, we will follow a mixed-methods approach and undertake child-, household-, CBCC- and market-level surveys and assessments as well as in-depth interviews and focus group discussions with project stakeholders. Assessing the simultaneous impact of preschool meals on diets, nutrition, child development and agriculture is a complex undertaking. This study is the first to explicitly examine, from a food systems perspective, the impact of a preschool meals programme on dietary choices, alongside outcomes in the nutritional, child development and agricultural domains. The findings of this evaluation will provide evidence to support policymakers in the scale-up of national programmes. ISRCTN registry, ID: ISRCTN96497560 . Registered on 21 September 2016.

Rapid evolution of analog circuits configured on a field programmable transistor array

NASA Technical Reports Server (NTRS)

Stoica, A.; Ferguson, M. I.; Zebulum, R. S.; Keymeulen, D.; Duong, V.; Daud, T.

2002-01-01

The purpose of this paper is to illustrate evolution of analog circuits on a stand-alone board-level evolvable system (SABLES). SABLES is part of an effort to achieve integrated evolvable systems. SABLES provides autonomous, fast (tens to hundreds of seconds), on-chip circuit evolution involving about 100,000 circuit evaluations. Its main components are a JPL Field Programmable Transistor Array (FPTA) chip used as transistor-level reconfigurable hardware, and a TI DSP that implements the evolutionary algorithm controlling the FPTA reconfiguration. The paper details an example of evolution on SABLES and points out to certain transient and memory effects that affect the stability of solutions obtained reusing the same piece of hardware for rapid testing of individuals during evolution.

A programmable power processor for a 25-kW power module

NASA Technical Reports Server (NTRS)

Lanier, R., Jr.; Kapustka, R. E.; Bush, J. R., Jr.

1979-01-01

A discussion of the power processor for an electrical power system for a 25-kW Power Module that could support the Space Shuttle program during the 1980's and 1990's and which could be a stepping stone to future large space power systems is presented. Trades that led to the selection of a microprocessor-controlled power processor are briefly discussed. Emphasis is given to the power processing equipment that uses a microprocessor to provide versatility that allows multiple use and to provide for future growth by reprogramming output voltage to a higher level (to 120 V from 30 V). Efficiency data from a breadboard programmable power processor are presented, and component selection and design considerations are also discussed.

Overview of the DART project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berry, K.R.; Hansen, F.R.; Napolitano, L.M.

1992-01-01

DART (DSP Arrary for Reconfigurable Tasks) is a parallel architecture of two high-performance SDP (digital signal processing) chips with the flexibility to handle a wide range of real-time applications. Each of the 32-bit floating-point DSP processes in DART is programmable in a high-level languate ( C'' or Ada). We have added extensions to the real-time operating system used by DART in order to support parallel processor. The combination of high-level language programmability, a real-time operating system, and parallel processing support significantly reduces the development cost of application software for signal processing and control applications. We have demonstrated this capability bymore » using DART to reconstruct images in the prototype VIP (Video Imaging Projectile) groundstation.« less

Overview of the DART project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berry, K.R.; Hansen, F.R.; Napolitano, L.M.

1992-01-01

DART (DSP Arrary for Reconfigurable Tasks) is a parallel architecture of two high-performance SDP (digital signal processing) chips with the flexibility to handle a wide range of real-time applications. Each of the 32-bit floating-point DSP processes in DART is programmable in a high-level languate (``C`` or Ada). We have added extensions to the real-time operating system used by DART in order to support parallel processor. The combination of high-level language programmability, a real-time operating system, and parallel processing support significantly reduces the development cost of application software for signal processing and control applications. We have demonstrated this capability by usingmore » DART to reconstruct images in the prototype VIP (Video Imaging Projectile) groundstation.« less

Effects of a lifestyle programme on ambulatory blood pressure and drug dosage in treated hypertensive patients: a randomized controlled trial.

PubMed

Burke, Valerie; Beilin, Lawrie J; Cutt, Hayley E; Mansour, Jacqueline; Wilson, Amy; Mori, Trevor A

2005-06-01

To assess effects of multifactorial lifestyle modification on antihypertensive drug needs in treated hypertensive individuals. Randomized controlled trial. Research studies unit. Overweight hypertensive patients, receiving one or two antihypertensive drugs, were recruited by advertising, and allocated randomly to a usual care group (controls; n = 118) or a lifestyle modification group (programme group; n = 123). A 4-month programme of weight loss, a low-sodium 'Dietary Approaches to Stop Hypertension'-type diet with added fish, physical activity and moderation of alcohol intake. After 4 months, if mean 24-h ambulatory blood pressure (ABP) was less than 135/85 mmHg, antihypertensive drugs were withdrawn over 4 weeks and long-term home blood pressure monitoring was begun. Antihypertensive drug requirements, ABP, weight, waist girth at 4 months and 1-year follow-up. Ninety control group and 102 programme group participants completed the study. Mean 24-h ABP changed after 4 months by -1.0/-0.3 +/- 0.5/0.4 mmHg in controls and -4.1/-2.1 +/- 0.7/0.5 mmHg with the lifestyle programme (P < 0.01). At follow-up, changes in the two groups were not significantly different (4.1/1.3 +/- 1.1/1.0 mmHg in controls; 2.5/-0.1 +/- 1.1/0.8 mmHg in the programme group; P = 0.73). At 4 months, drug withdrawal differed significantly between the groups (P = 0.038) in men (control 44%; programme 66%) but not in women (65 and 64%, respectively; P = 0.964). At follow-up, sex-related differences were not significant, and 41% in the control group and 43% in the programme group maintained drug-withdrawal status. With the programme, net weight loss was 3.3 kg (P < 0.001) at 4 months and 3.0 kg (P < 0.001) at follow-up; respective net decreases in waist girth were 3.3 cm (P < 0.001) and 3.5 cm (P < 0.001). A 4-month multifactorial lifestyle modification in patients with treated hypertension reduced blood pressure in the short-term. Decreased central obesity persisted 1 year later and could reduce overall cardiovascular risk.

Evaluation of an occupational health intervention programme on whole‐body vibration in forklift truck drivers: a controlled trial

PubMed Central

Hulshof, C T J; Verbeek, J H A M; Braam, I T J; Bovenzi, M; van Dijk, F J H

2006-01-01

Objectives To evaluate process and outcome of a multifaceted occupational health intervention programme on whole‐body vibration (WBV) in forklift truck drivers. Methods An experimental pretest/post‐test control group study design. The authors trained occupational health services (OHS) in the experimental group in the use of the programme. OHS in the control group were asked to deliver care as usual. In total, 15 OHS, 32 OHS professionals, 26 companies, and 260 forklift drivers were involved. Post‐test measurements were carried out one year after the start of the programme. Results Baseline data before the start of the programme showed no difference between experimental and control group. Results of the outcome evaluation indicate a slight, although not statistically significant, reduction of WBV exposure in the experimental group (p = 0.06). Process evaluation revealed a positive influence on company policy toward WBV, attitude and intended behaviour of forklift drivers, and a trend towards an increase in knowledge of OHS professionals and company managers. The number of observed control measures with a major impact (levelling of surface and reduction of speed) was rather low. In those cases where control measures had been taken, there was a significant reduction in WBV exposure. This limited effect of the programme might be caused by the short period of follow up and the dropout of participants. The feasibility and the usefulness of the programme within the OHS setting were rated good by the participants. Conclusions This programme to decrease WBV exposure was partially effective. Significant effects on intermediate objectives were observed. More research on the effectiveness of intervention in the field of WBV is needed. PMID:16551762

Programmable spectral engine design of hyperspectral image projectors based on digital micro-mirror device (DMD)

NASA Astrophysics Data System (ADS)

Wang, Xicheng; Gao, Jiaobo; Wu, Jianghui; Li, Jianjun; Cheng, Hongliang

2017-02-01

Recently, hyperspectral image projectors (HIP) have been developed in the field of remote sensing. For the advanced performance of system-level validation, target detection and hyperspectral image calibration, HIP has great possibility of development in military, medicine, commercial and so on. HIP is based on the digital micro-mirror device (DMD) and projection technology, which is capable to project arbitrary programmable spectra (controlled by PC) into the each pixel of the IUT1 (instrument under test), such that the projected image could simulate realistic scenes that hyperspectral image could be measured during its use and enable system-level performance testing and validation. In this paper, we built a visible hyperspectral image projector also called the visible target simulator with double DMDs, which the first DMD is used to product the selected monochromatic light from the wavelength of 410 to 720 um, and the light come to the other one. Then we use computer to load image of realistic scenes to the second DMD, so that the target condition and background could be project by the second DMD with the selected monochromatic light. The target condition can be simulated and the experiment could be controlled and repeated in the lab, making the detector instrument could be tested in the lab. For the moment, we make the focus on the spectral engine design include the optical system, research of DMD programmable spectrum and the spectral resolution of the selected spectrum. The detail is shown.

A reconfigurable medically cohesive biomedical front-end with ΣΔ ADC in 0.18µm CMOS.

PubMed

Jha, Pankaj; Patra, Pravanjan; Naik, Jairaj; Acharya, Amit; Rajalakshmi, P; Singh, Shiv Govind; Dutta, Ashudeb

2015-08-01

This paper presents a generic programmable analog front-end (AFE) for acquisition and digitization of various biopotential signals. This includes a lead-off detection circuit, an ultra-low current capacitively coupled signal conditioning stage with programmable gain and bandwidth, a new mixed signal automatic gain control (AGC) mechanism and a medically cohesive reconfigurable ΣΔ ADC. The full system is designed in UMC 0.18μm CMOS. The AFE achieves an overall linearity of more 10 bits with 0.47μW power consumption. The ADC provides 2(nd) order noise-shaping while using single integrator and an ENOB of ~11 bits with 5μW power consumption. The system was successfully verified for various ECG signals from PTB database. This system is intended for portable batteryless u-Healthcare devices.

Motor imaginary-based brain-machine interface design using programmable logic controllers for the disabled.

PubMed

Jeyabalan, Vickneswaran; Samraj, Andrews; Loo, Chu Kiong

2010-10-01

Aiming at the implementation of brain-machine interfaces (BMI) for the aid of disabled people, this paper presents a system design for real-time communication between the BMI and programmable logic controllers (PLCs) to control an electrical actuator that could be used in devices to help the disabled. Motor imaginary signals extracted from the brain’s motor cortex using an electroencephalogram (EEG) were used as a control signal. The EEG signals were pre-processed by means of adaptive recursive band-pass filtrations (ARBF) and classified using simplified fuzzy adaptive resonance theory mapping (ARTMAP) in which the classified signals are then translated into control signals used for machine control via the PLC. A real-time test system was designed using MATLAB for signal processing, KEP-Ware V4 OLE for process control (OPC), a wireless local area network router, an Omron Sysmac CPM1 PLC and a 5 V/0.3A motor. This paper explains the signal processing techniques, the PLC's hardware configuration, OPC configuration and real-time data exchange between MATLAB and PLC using the MATLAB OPC toolbox. The test results indicate that the function of exchanging real-time data can be attained between the BMI and PLC through OPC server and proves that it is an effective and feasible method to be applied to devices such as wheelchairs or electronic equipment.

Controlling multisupplier operations by intelligent EDI

NASA Astrophysics Data System (ADS)

Eskelinen, Juha; Kovanen, Jyrki; Linna, Miika; Mononen, Tero; Sulonen, Reijo

In modern CIM (Computer Integrated Manufacturing) environment, problems that can affect production should be discovered as soon as possible. This can be very difficult in multisupplier operations where problems outside one organization can remain undetected until they already have effects inside that organization. If Electronic Data Interchange (EDI) is used to control intercompany operations there is a better possibility to detect problems on logistic chain. Because these problems usually have some effects in the flow of EDI messages, they can be detected by controlling this flow. A Forget-Me-Not (FMN) system, which is a programmable message management system that can control the flow of EDI messages and detect exceptional situations is discussed.

Effectiveness of the population-based Check your health preventive programme conducted in primary care with 4 years follow-up [the CORE trial]: study protocol for a randomised controlled trial.

PubMed

Maindal, Helle Terkildsen; Støvring, Henrik; Sandbaek, Annelli

2014-08-29

The periodic health check-up has been a fundamental part of routine medical practice for decades, despite a lack of consensus regarding its value in health promotion and disease prevention. A large-scale Danish population-based preventive programme 'Check your health' was developed based on available evidence of screening and successive accepted treatment, prevention for diseases and health promotion, and is closely aligned with the current health care system.The objective of the 'Check your health' [CORE] trial is to investigate effectiveness on health outcomes of a preventive health check offered at a population-level to all individuals aged 30-49 years, and to establish the cost-effectiveness. The trial will be conducted as a pragmatic household-cluster randomised controlled trial involving 10,505 individuals. All individuals within a well-defined geographical area in the Central Denmark Region, Denmark (DK) were randomised to be offered a preventive health check (Intervention group, n = 5250) or to maintain routine access to healthcare until a delayed intervention (Comparison group, n = 5255). The programme consists of a health examination which yields an individual risk profile, and according to this participants are assigned to one of the following interventions: (a) referral to a health promoting consultation in general practice, (b) behavioural programmes at the local Health Centre, or (c) no need for follow-up.The primary outcomes at 4 years follow-up are: ten-year-risk of fatal cardiovascular event (Heart-SCORE model), physical activity level (self-report and cardiorespiratory fitness), quality of life (SF12), sick leave and labour market attachment. Cost-effectiveness will be evaluated according to life years gained, direct costs and total health costs. Intention to treat analysis will be performed. Results from the largest Danish health check programme conducted within the current healthcare system, spanning the sectors which share responsibility for the individual, will provide a scientific basis to be used in the development of systems to optimise population health in the 21st century. The trial has registered at ClinicalTrials.gov with an ID: NCT02028195 (7. March 2014).

The Effects of Skill Training on Social Workers' Professional Competences in Norway: Results of a Cluster-Randomised Study

PubMed Central

Malmberg-Heimonen, Ira; Natland, Sidsel; Tøge, Anne Grete; Hansen, Helle Cathrine

2016-01-01

Using a cluster-randomised design, this study analyses the effects of a government-administered skill training programme for social workers in Norway. The training programme aims to improve social workers' professional competences by enhancing and systematising follow-up work directed towards longer-term unemployed clients in the following areas: encountering the user, system-oriented efforts and administrative work. The main tools and techniques of the programme are based on motivational interviewing and appreciative inquiry. The data comprise responses to baseline and eighteen-month follow-up questionnaires administered to all social workers (n = 99) in eighteen participating Labour and Welfare offices randomised into experimental and control groups. The findings indicate that the skill training programme positively affected the social workers' evaluations of their professional competences and quality of work supervision received. The acquisition and mastering of combinations of specific tools and techniques, a comprehensive supervision structure and the opportunity to adapt the learned skills to local conditions were important in explaining the results. PMID:27559232

Earth observation in support of malaria control and epidemiology: MALAREO monitoring approaches.

PubMed

Franke, Jonas; Gebreslasie, Michael; Bauwens, Ides; Deleu, Julie; Siegert, Florian

2015-06-03

Malaria affects about half of the world's population, with the vast majority of cases occuring in Africa. National malaria control programmes aim to reduce the burden of malaria and its negative, socioeconomic effects by using various control strategies (e.g. vector control, environmental management and case tracking). Vector control is the most effective transmission prevention strategy, while environmental factors are the key parameters affecting transmission. Geographic information systems (GIS), earth observation (EO) and spatial modelling are increasingly being recognised as valuable tools for effective management and malaria vector control. Issues previously inhibiting the use of EO in epidemiology and malaria control such as poor satellite sensor performance, high costs and long turnaround times, have since been resolved through modern technology. The core goal of this study was to develop and implement the capabilities of EO data for national malaria control programmes in South Africa, Swaziland and Mozambique. High- and very high resolution (HR and VHR) land cover and wetland maps were generated for the identification of potential vector habitats and human activities, as well as geoinformation on distance to wetlands for malaria risk modelling, population density maps, habitat foci maps and VHR household maps. These products were further used for modelling malaria incidence and the analysis of environmental factors that favour vector breeding. Geoproducts were also transferred to the staff of national malaria control programmes in seven African countries to demonstrate how EO data and GIS can support vector control strategy planning and monitoring. The transferred EO products support better epidemiological understanding of environmental factors related to malaria transmission, and allow for spatio-temporal targeting of malaria control interventions, thereby improving the cost-effectiveness of interventions.

Master Console System Monitoring and Control Development

NASA Technical Reports Server (NTRS)

Brooks, Russell A.

2013-01-01

The Master Console internship during the summer of 2013 involved the development of firing room displays and support applications at the John F. Kennedy Space Center (KSC). This position was with the Master Console Product Group (MCPG) on the Launch Control System (LCS) project. This project is responsible for the System Monitoring and Control (SMC) and Record and Retrieval (R&R) of launch operations data. The Master Console is responsible for: loading the correct software into each of the remaining consoles in the firing room, connecting the proper data paths to and from the launch vehicle and all ground support equipment, and initializing the entire firing room system to begin processing. During my internship, I created control scripts using the Application Control Language (ACL) to analyze the health and status of Kennedy Ground Control System (KGCS) programmable logic controllers (PLCs). This application provides a system health and status display I created with summarized data for use by Master Console Operators (MCO) to monitor and verify the integrity of KGCS subsystems.

Carrier-envelope phase stabilization and control using a transmission grating compressor and an AOPDF.

PubMed

Canova, Lorenzo; Chen, Xiaowei; Trisorio, Alexandre; Jullien, Aurélie; Assion, Andreas; Tempea, Gabriel; Forget, Nicolas; Oksenhendler, Thomas; Lopez-Martens, Rodrigo

2009-05-01

Carrier-envelope phase (CEP) stabilization of a femtosecond chirped-pulse amplification system featuring a compact transmission grating compressor is demonstrated. The system includes two amplification stages and routinely generates phase-stable (approximately 250 mrad rms) 2 mJ, 25 fs pulses at 1 kHz. Minimizing the optical pathway in the compressor enables phase stabilization without feedback control of the grating separation or beam pointing. We also demonstrate for the first time to the best of our knowledge, out-of-loop control of the CEP using an acousto-optic programmable dispersive filter inside the laser chain.

A multiparametric automatic method to monitor long-term reproducibility in digital mammography: results from a regional screening programme.

PubMed

Gennaro, G; Ballaminut, A; Contento, G

2017-09-01

This study aims to illustrate a multiparametric automatic method for monitoring long-term reproducibility of digital mammography systems, and its application on a large scale. Twenty-five digital mammography systems employed within a regional screening programme were controlled weekly using the same type of phantom, whose images were analysed by an automatic software tool. To assess system reproducibility levels, 15 image quality indices (IQIs) were extracted and compared with the corresponding indices previously determined by a baseline procedure. The coefficients of variation (COVs) of the IQIs were used to assess the overall variability. A total of 2553 phantom images were collected from the 25 digital mammography systems from March 2013 to December 2014. Most of the systems showed excellent image quality reproducibility over the surveillance interval, with mean variability below 5%. Variability of each IQI was 5%, with the exception of one index associated with the smallest phantom objects (0.25 mm), which was below 10%. The method applied for reproducibility tests-multi-detail phantoms, cloud automatic software tool to measure multiple image quality indices and statistical process control-was proven to be effective and applicable on a large scale and to any type of digital mammography system. • Reproducibility of mammography image quality should be monitored by appropriate quality controls. • Use of automatic software tools allows image quality evaluation by multiple indices. • System reproducibility can be assessed comparing current index value with baseline data. • Overall system reproducibility of modern digital mammography systems is excellent. • The method proposed and applied is cost-effective and easily scalable.

Stimuli-free programmable drug release for combination chemo-therapy

NASA Astrophysics Data System (ADS)

Fan, Li; Jin, Boquan; Zhang, Silu; Song, Chaojun; Li, Quan

2016-06-01

Combinational chemotherapy capable of targeted delivery and programmable multi-drug release leads to enhanced drug efficacy, and is highly desired for cancer treatment. However, effective approaches for achieving both features in a single treatment are limited. In the present work, we demonstrated programmed delivery of both chemotherapeutic and immunotherapeutic agents with tumor cell targeting capability by using SiO2 based self-decomposable nanoparticulate systems. The programmable drug delivery is realized by manipulating drug loading configurations instead of relying on external stimuli. Both in vitro and in vivo results showed specific drug binding to FAT1-expressing colon cancer cells. The loaded dual drugs were demonstrated to be delivered in a sequential manner with specific time intervals between their peak releases, which maximize the synergistic effect of the chemotherapeutics. These features led to significantly enhanced drug efficacy and reduced system toxicity. The tumor weight decreased by 1/350, together with a moderate increase in rats' body weight, which were observed when adopting the dual drug loaded nanoparticles, as compared to those of the control groups. The present system provides a simple and feasible method for the design of targeting and combination chemotherapy with programmed drug release.Combinational chemotherapy capable of targeted delivery and programmable multi-drug release leads to enhanced drug efficacy, and is highly desired for cancer treatment. However, effective approaches for achieving both features in a single treatment are limited. In the present work, we demonstrated programmed delivery of both chemotherapeutic and immunotherapeutic agents with tumor cell targeting capability by using SiO2 based self-decomposable nanoparticulate systems. The programmable drug delivery is realized by manipulating drug loading configurations instead of relying on external stimuli. Both in vitro and in vivo results showed specific drug binding to FAT1-expressing colon cancer cells. The loaded dual drugs were demonstrated to be delivered in a sequential manner with specific time intervals between their peak releases, which maximize the synergistic effect of the chemotherapeutics. These features led to significantly enhanced drug efficacy and reduced system toxicity. The tumor weight decreased by 1/350, together with a moderate increase in rats' body weight, which were observed when adopting the dual drug loaded nanoparticles, as compared to those of the control groups. The present system provides a simple and feasible method for the design of targeting and combination chemotherapy with programmed drug release. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr06305a

Chronic disease management programmes for adults with asthma.

PubMed

Peytremann-Bridevaux, Isabelle; Arditi, Chantal; Gex, Grégoire; Bridevaux, Pierre-Olivier; Burnand, Bernard

2015-05-27

The burden of asthma on patients and healthcare systems is substantial. Interventions have been developed to overcome difficulties in asthma management. These include chronic disease management programmes, which are more than simple patient education, encompassing a set of coherent interventions that centre on the patients' needs, encouraging the co-ordination and integration of health services provided by a variety of healthcare professionals, and emphasising patient self-management as well as patient education. To evaluate the effectiveness of chronic disease management programmes for adults with asthma. Cochrane Central Register of Controlled Trials (CENTRAL), Cochrane Effective Practice and Organisation of Care (EPOC) Group Specialised Register, MEDLINE (MEDLINE In-Process and Other Non-Indexed Citations), EMBASE, CINAHL, and PsycINFO were searched up to June 2014. We also handsearched selected journals from 2000 to 2012 and scanned reference lists of relevant reviews. We included individual or cluster-randomised controlled trials, non-randomised controlled trials, and controlled before-after studies comparing chronic disease management programmes with usual care in adults over 16 years of age with a diagnosis of asthma. The chronic disease management programmes had to satisfy at least the following five criteria: an organisational component targeting patients; an organisational component targeting healthcare professionals or the healthcare system, or both; patient education or self-management support, or both; active involvement of two or more healthcare professionals in patient care; a minimum duration of three months. After an initial screen of the titles, two review authors working independently assessed the studies for eligibility and study quality; they also extracted the data. We contacted authors to obtain missing information and additional data, where necessary. We pooled results using the random-effects model and reported the pooled mean or standardised mean differences (SMDs). A total of 20 studies including 81,746 patients (median 129.5) were included in this review, with a follow-up ranging from 3 to more than 12 months. Patients' mean age was 42.5 years, 60% were female, and their asthma was mostly rated as moderate to severe. Overall the studies were of moderate to low methodological quality, because of limitations in their design and the wide confidence intervals for certain results.Compared with usual care, chronic disease management programmes resulted in improvements in asthma-specific quality of life (SMD 0.22, 95% confidence interval (CI) 0.08 to 0.37), asthma severity scores (SMD 0.18, 95% CI 0.05 to 0.30), and lung function tests (SMD 0.19, 95% CI 0.09 to 0.30). The data for improvement in self-efficacy scores were inconclusive (SMD 0.51, 95% CI -0.08 to 1.11). Results on hospitalisations and emergency department or unscheduled visits could not be combined in a meta-analysis because the data were too heterogeneous; results from the individual studies were inconclusive overall. Only a few studies reported results on asthma exacerbations, days off work or school, use of an action plan, and patient satisfaction. Meta-analyses could not be performed for these outcomes. There is moderate to low quality evidence that chronic disease management programmes for adults with asthma can improve asthma-specific quality of life, asthma severity, and lung function tests. Overall, these results provide encouraging evidence of the potential effectiveness of these programmes in adults with asthma when compared with usual care. However, the optimal composition of asthma chronic disease management programmes and their added value, compared with education or self-management alone that is usually offered to patients with asthma, need further investigation.

Neglected tropical diseases and the millennium development goals: why the "other diseases" matter: reality versus rhetoric.

PubMed

Molyneux, David H; Malecela, Mwele N

2011-12-13

Since 2004 there has been an increased recognition of the importance of Neglected Tropical Diseases (NTDs) as impediments to development. These diseases are caused by a variety of infectious agents - viruses, bacteria and parasites - which cause a diversity of clinical conditions throughout the tropics. The World Health Organisation (WHO) has defined seventeen of these conditions as core NTDs. The objectives for the control, elimination or eradication of these conditions have been defined in World Health Assembly resolutions whilst the strategies for the control or elimination of individual diseases have been defined in various WHO documents. Since 2005 there has been a drive for the expanded control of these diseases through an integrated approach of mass drug administration referred to as Preventive Chemotherapy via community-based distribution systems and through schools. This has been made possible by donations from major pharmaceutical companies of quality and efficacious drugs which have a proven track record of safety. As a result of the increased commitment of endemic countries, bilateral donors and non-governmental development organisations, there has been a considerable expansion of mass drug administration. In particular, programmes targeting lymphatic filariasis, onchocerciasis, schistosomiasis, trachoma and soil transmitted helminth infections have expanded to treat 887. 8 million people in 2009. There has been significant progress towards guinea worm eradication, and the control of leprosy and human African trypanosomiasis. This paper responds to what the authors believe are inappropriate criticisms of these programmes and counters accusations of the motives of partners made in recently published papers. We provide a detailed response and update the information on the numbers of global treatments undertaken for NTDs and list the success stories to date.The paper acknowledges that in undertaking any health programme in environments such as post-conflict countries, there are always challenges. It is also recognised that NTD control must always be undertaken within the health system context. However, it is important to emphasise that the availability of donated drugs, the multiple impact of those drugs, the willingness of countries to undertake their distribution, thereby committing their own resources to the programmes, and the proven beneficial results outweigh the problems which are faced in environments where communities are often beyond the reach of health services. Given the availability of these interventions, their cost effectiveness and the broader development impact we believe it would be unethical not to continue programmes of such long term benefit to the "bottom billion".

FPGA and USB based control board for quantum random number generator

NASA Astrophysics Data System (ADS)

Wang, Jian; Wan, Xu; Zhang, Hong-Fei; Gao, Yuan; Chen, Teng-Yun; Liang, Hao

2009-09-01

The design and implementation of FPGA-and-USB-based control board for quantum experiments are discussed. The usage of quantum true random number generator, control- logic in FPGA and communication with computer through USB protocol are proposed in this paper. Programmable controlled signal input and output ports are implemented. The error-detections of data frame header and frame length are designed. This board has been used in our decoy-state based quantum key distribution (QKD) system successfully.

The effectiveness and cost-effectiveness of parent training/education programmes for the treatment of conduct disorder, including oppositional defiant disorder, in children.

PubMed

Dretzke, J; Frew, E; Davenport, C; Barlow, J; Stewart-Brown, S; Sandercock, J; Bayliss, S; Raftery, J; Hyde, C; Taylor, R

2005-12-01

To assess the clinical and cost-effectiveness of parent training programmes for the treatment of children with conduct disorder (CD) up to the age of 18 years. Electronic databases. For the effectiveness review, relevant studies were identified and evaluated. A quantitative synthesis of behavioural outcomes across trials was also undertaken using two approaches: vote counting and meta-analysis. The economic analysis consisted of reviewing previous economic/cost evaluations of parent training/education programmes and the economic information within sponsor's submissions; carrying out a detailed exploration of costs of parent training/education programmes; and a de novo modelling assessment of the cost-effectiveness of parent training/education programmes. The potential budget impact to the health service of implementing such programmes was also considered. Many of the 37 randomised controlled trials that met the review inclusion and exclusion criteria were assessed as being of poor methodological quality. Studies were clinically heterogeneous in terms of the population, type of parent training/education programme and content, setting, delivery, length and child behaviour outcomes used. Both vote counting and meta-analysis revealed a consistent trend across all studies towards short-term effectiveness (up to 4 months) of parent training/education programmes (compared with control) as measured by a change in child behaviour. Pooled estimates showed a statistically significant improvement on the Eyberg Child Behaviour Inventory frequency and intensity scales, the Dyadic Parent-Child Interaction Coding System and the Child Behaviour Checklist. No studies reported a statistically significant result favouring control over parent training/education programmes. There were few statistically significant differences between different parent training/education programmes, although there was a trend towards more intensive interventions (e.g. longer contact hours, additional child involvement) being more effective. The cost of treating CD is high, with costs incurred by many agencies. A recent study suggested that by age 28, costs for individuals with CD were around 10 times higher than for those with no problems, with a mean cost of 70,019 pounds sterling. Criminality incurs the greatest cost, followed by educational provision, foster and residential care and state benefits. Only a small proportion of these costs fall on health services. Using a 'bottom-up' costing approach, the costs per family of providing parent training/education programmes range from 629 pounds sterling to 3839 pounds sterling depending on the type and style of delivery. Using the conservative assumption that there are no cost savings from treatment, a total lifetime quality of life gain of 0.1 would give a cost per quality-adjusted life-year of between 38,393 pounds sterling and 6288 pounds sterling depending on the type of programme delivery and setting. Parent training/education programmes appear to be an effective and potentially cost-effective therapy for children with CD. However, the relative effectiveness and cost-effectiveness of different models (such as therapy intensity and setting) require further investigation. Further research is required on the impact of parent training/education programmes on the quality of life of children with CD and their parents/carers, as well as on longer term child outcomes.

Computerized Manufacturing Automation. Employment, Education, and the Workplace. Summary.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

The application of programmable automation (PA) offers new opportunities to enhance and streamline manufacturing processes. Five PA technologies are examined in this report: computer-aided design, robots, numerically controlled machine tools, flexible manufacturing systems, and computer-integrated manufacturing. Each technology is in a relatively…

IOPA: I/O-aware parallelism adaption for parallel programs

PubMed Central

Liu, Tao; Liu, Yi; Qian, Chen; Qian, Depei

2017-01-01

With the development of multi-/many-core processors, applications need to be written as parallel programs to improve execution efficiency. For data-intensive applications that use multiple threads to read/write files simultaneously, an I/O sub-system can easily become a bottleneck when too many of these types of threads exist; on the contrary, too few threads will cause insufficient resource utilization and hurt performance. Therefore, programmers must pay much attention to parallelism control to find the appropriate number of I/O threads for an application. This paper proposes a parallelism control mechanism named IOPA that can adjust the parallelism of applications to adapt to the I/O capability of a system and balance computing resources and I/O bandwidth. The programming interface of IOPA is also provided to programmers to simplify parallel programming. IOPA is evaluated using multiple applications with both solid state and hard disk drives. The results show that the parallel applications using IOPA can achieve higher efficiency than those with a fixed number of threads. PMID:28278236

IOPA: I/O-aware parallelism adaption for parallel programs.

PubMed

Liu, Tao; Liu, Yi; Qian, Chen; Qian, Depei

2017-01-01

With the development of multi-/many-core processors, applications need to be written as parallel programs to improve execution efficiency. For data-intensive applications that use multiple threads to read/write files simultaneously, an I/O sub-system can easily become a bottleneck when too many of these types of threads exist; on the contrary, too few threads will cause insufficient resource utilization and hurt performance. Therefore, programmers must pay much attention to parallelism control to find the appropriate number of I/O threads for an application. This paper proposes a parallelism control mechanism named IOPA that can adjust the parallelism of applications to adapt to the I/O capability of a system and balance computing resources and I/O bandwidth. The programming interface of IOPA is also provided to programmers to simplify parallel programming. IOPA is evaluated using multiple applications with both solid state and hard disk drives. The results show that the parallel applications using IOPA can achieve higher efficiency than those with a fixed number of threads.

Cost-effectiveness analysis of a collaborative care programme for depression in primary care.

PubMed

Aragonès, Enric; López-Cortacans, Germán; Sánchez-Iriso, Eduardo; Piñol, Josep-Lluís; Caballero, Antonia; Salvador-Carulla, Luis; Cabasés, Juan

2014-04-01

Collaborative care programmes lead to better outcomes in the management of depression. A programme of this nature has demonstrated its effectiveness in primary care in Spain. Our objective was to evaluate the cost-effectiveness of this programme compared to usual care. A bottom-up cost-effectiveness analysis was conducted within a randomized controlled trial (2007-2010). The intervention consisted of a collaborative care programme with clinical, educational and organizational procedures. Outcomes were monitored over a 12 months period. Primary outcomes were incremental cost-effectiveness ratios (ICER): mean differences in costs divided by quality-adjusted life years (QALY) and mean differences in costs divided by depression-free days (DFD). Analyses were performed from a healthcare system perspective (considering healthcare costs) and from a society perspective (including healthcare costs plus loss of productivity costs). Three hundred and thirty-eight adult patients with major depression were assessed at baseline. Only patients with complete data were included in the primary analysis (166 in the intervention group and 126 in the control group). From a healthcare perspective, the average incremental cost of the programme compared to usual care was €182.53 (p<0.001). Incremental effectiveness was 0.045 QALY (p=0.017) and 40.09 DFD (p=0.011). ICERs were €4,056/QALY and €4.55/DFD. These estimates and their uncertainty are graphically represented in the cost-effectiveness plane. The amount of 13.6% of patients with incomplete data may have introduced a bias. Available data about non-healthcare costs were limited, although they may represent most of the total cost of depression. The intervention yields better outcomes than usual care with a modest increase in costs, resulting in favourable ICERs. This supports the recommendation for its implementation. Copyright © 2014 Elsevier B.V. All rights reserved.

Impact of vectorborne parasitic neglected tropical diseases on child health.

PubMed

Barry, Meagan A; Murray, Kristy O; Hotez, Peter J; Jones, Kathryn M

2016-07-01

Chagas disease, leishmaniasis, onchocerciasis and lymphatic filariasis are all vectorborne neglected tropical diseases (NTDs) that are responsible for significant disease burden in impoverished children and adults worldwide. As vectorborne parasitic diseases, they can all be targeted for elimination through vector control strategies. Examples of successful vector control programmes for these diseases over the past two decades have included the Southern Cone Initiative against Chagas disease, the Kala-azar Control Scheme against leishmaniasis, the Onchocerciasis Control Programme and the lymphatic filariasis control programme in The Gambia. A common vector control component in all of these programmes is the use of adulticides including dichlorodiphenyltrichloroethane and newer synthetic pyrethroid insecticides against the insect vectors of disease. Household spraying has been used against Chagas disease and leishmaniasis, and insecticide-treated bed nets have helped prevent leishmaniasis and lymphatic filariasis. Recent trends in vector control focus on collaborations between programmes and sectors to achieve integrated vector management that addresses the holistic vector control needs of a community rather than approaching it on a disease-by-disease basis, with the goals of increased efficacy, sustainability and cost-effectiveness. As evidence of vector resistance to currently used insecticide regimens emerges, research to develop new and improved insecticides and novel control strategies will be critical in reducing disease burden. In the quest to eliminate these vectorborne NTDs, efforts need to be made to continue existing control programmes, further implement integrated vector control strategies and stimulate research into new insecticides and control methods. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

A Programmable Microkernel for Real-Time Systems

DTIC Science & Technology

2003-06-01

A Programmable Microkernel for Real - Time Systems Christoph M. Kirsch Thomas A. Henzinger Marco A.A. Sanvido Report No. UCB/CSD-3-1250 June 2003...TITLE AND SUBTITLE A Programmable Microkernel for Real - Time Systems 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 A Programmable Microkernel for Real - Time Systems ∗ Christoph M

Modernizing the Mobility Air Force for Tomorrow’s Air Traffic Management System

DTIC Science & Technology

2012-01-01

Decision Support System GLONASS Global’naya Navigatsionnaya Sputnikovaya Sistema [Global Navigation Satellite System] GPS Global Positioning System HF high...spreadsheet, November 2009. Eurocontrol, “Link 2000+ Programme: Frequently Asked Questions,” web page, undated(a). As of June 5, 2012: http...www.eurocontrol.int/faq/link2000 ———, “Link 2000+ Programme,” web page, undated(b). As of June 5, 2012: http://www.eurocontrol.int/programmes/link-2000-programme

Thermally programmable gas storage and release in single crystals of an organic van der Waals host.

PubMed

Enright, Gary D; Udachin, Konstantin A; Moudrakovski, Igor L; Ripmeester, John A

2003-08-20

A single crystal of a low density form of guest-free p-tert-butylcalix[4]arene can take up and release small guest molecules by controlling the temperature and pressure without changing the structure. Using NMR spectroscopy with flowing hyperpolarized xenon, we have shown that at room temperature access of xenon to the pore system is difficult, whereas it is relatively easy at 100 degrees C. There are good prospects for simple van der Waals materials such as the title material to be used as programmable zeolite mimics.

Fabrication of miniature elastomer lenses with programmable liquid mold for smartphone microscopy: curing polydimethylsiloxane with in situ curvature control.

PubMed

Karunakaran, Bhuvaneshwari; Tharion, Joseph; Dhawangale, Arvind Ramrao; Paul, Debjani; Mukherji, Soumyo

2018-02-01

Miniature lenses can transform commercial imaging systems, e.g., smartphones and webcams, into powerful, low-cost, handheld microscopes. To date, the reproducible fabrication of polymer lenses is still a challenge as they require controlled dispensing of viscous liquid. This paper reports a reproducible lens fabrication technique using liquid mold with programmable curvature and off-the-shelf materials. The lens curvature is controlled during fabrication by tuning the curvature of an interface of two immiscible liquids [polydimethylsiloxane (PDMS) and glycerol]. The curvature control is implemented using a visual feedback system, which includes a software-based guiding system to produce lenses of desired curvature. The technique allows PDMS lens fabrication of a wide range of sizes and focal lengths, within 20 min. The fabrication of two lens diameters: 1 and 5 mm with focal lengths ranging between 1.2 and 11 mm are demonstrated. The lens surface and bulk quality check performed using X-ray microtomography and atomic force microscopy reveal that the lenses are suitable for optical imaging. Furthermore, a smartphone microscope with ∼1.4-μm resolution is developed using a self-assembly of a single high power fabricated lens and microaperture. The lenses have various potential applications, e.g., optofluidics, diagnostics, forensics, and surveillance. (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).

Health-system strengthening and tuberculosis control.

PubMed

Atun, Rifat; Weil, Diana E C; Eang, Mao Tan; Mwakyusa, David

2010-06-19

Weak health systems are hindering global efforts for tuberculosis care and control, but little evidence is available on effective interventions to address system bottlenecks. This report examines published evidence, programme reviews, and case studies to identify innovations in system design and tuberculosis control to resolve these bottlenecks. We outline system bottlenecks in relation to governance, financing, supply chain management, human resources, health-information systems, and service delivery; and adverse effects from rapid introduction of suboptimum system designs. This report also documents innovative solutions for disease control and system design. Solutions pursued in individual countries are specific to the nature of the tuberculosis epidemic, the underlying national health system, and the contributors engaged: no one size fits all. Findings from countries, including Bangladesh, Cambodia, India, Tanzania, Thailand, and Vietnam, suggest that advances in disease control and system strengthening are complementary. Tuberculosis care and control are essential elements of health systems, and simultaneous efforts to innovate systems and disease response are mutually reinforcing. Highly varied and context-specific responses to tuberculosis show that solutions need to be documented and compared to develop evidence-based policies and practice. Copyright 2010 Elsevier Ltd. All rights reserved.

The principles of disease elimination and eradication.

PubMed Central

Dowdle, W. R.

1998-01-01

The Dahlem Workshop discussed the hierarchy of possible public health interventions in dealing with infectious diseases, which were defined as control, elimination of disease, elimination of infections, eradication, and extinction. The indicators of eradicability were the availability of effective interventions and practical diagnostic tools and the essential need for humans in the life-cycle of the agent. Since health resources are limited, decisions have to be made as to whether their use for an elimination or eradication programme is preferable to their use elsewhere. The costs and benefits of global eradication programmes concern direct effects on morbidity and mortality and consequent effects on the health care system. The success of any disease eradication initiative depends strongly on the level of societal and political commitment, with a key role for the World Health Assembly. Eradication and ongoing programmes constitute potentially complementary approaches to public health. Elimination and eradication are the ultimate goals of public health, evolving naturally from disease control. The basic question is whether these goals are to be achieved in the present or some future generation. PMID:10063669

Operational efficiency and sustainability of vector control of malaria and dengue: descriptive case studies from the Philippines

PubMed Central

2012-01-01

Background Analysis is lacking on the management of vector control systems in disease-endemic countries with respect to the efficiency and sustainability of operations. Methods Three locations were selected, at the scale of province, municipality and barangay (i.e. village). Data on disease incidence, programme activities, and programme management were collected on-site through meetings and focus group discussions. Results Adaptation of disease control strategies to the epidemiological situation per barangay, through micro-stratification, brings gains in efficiency, but should be accompanied by further capacity building on local situational analysis for better selection and targeting of vector control interventions within the barangay. An integrated approach to vector control, aiming to improve the rational use of resources, was evident with a multi-disease strategy for detection and response, and by the use of combinations of vector control methods. Collaboration within the health sector was apparent from the involvement of barangay health workers, re-orientation of job descriptions and the creation of a disease surveillance unit. The engagement of barangay leaders and use of existing community structures helped mobilize local resources and voluntary services for vector control. In one location, local authorities and the community were involved in the planning, implementation and evaluation of malaria control, which triggered local programme ownership. Conclusions Strategies that contributed to an improved efficiency and sustainability of vector control operations were: micro-stratification, integration of vector control within the health sector, a multi-disease approach, involvement of local authorities, and empowerment of communities. Capacity building on situational analysis and vector surveillance should be addressed through national policy and guidelines. PMID:22873707

Integrating an infectious disease programme into the primary health care service: a retrospective analysis of Chagas disease community-based surveillance in Honduras.

PubMed

Hashimoto, Ken; Zúniga, Concepción; Nakamura, Jiro; Hanada, Kyo

2015-03-24

Integration of disease-specific programmes into the primary health care (PHC) service has been attempted mostly in clinically oriented disease control such as HIV/AIDS and tuberculosis but rarely in vector control. Chagas disease is controlled principally by interventions against the triatomine vector. In Honduras, after successful reduction of household infestation by vertical approach, the Ministry of Health implemented community-based vector surveillance at the PHC services (health centres) to prevent the resurgence of infection. This paper retrospectively analyses the effects and process of integrating a Chagas disease vector surveillance system into health centres. We evaluated the effects of integration at six pilot sites in western Honduras during 2008-2011 on; surveillance performance; knowledge, attitude and practice in schoolchildren; reports of triatomine bug infestation and institutional response; and seroprevalence among children under 15 years of age. The process of integration of the surveillance system was analysed using the PRECEDE-PROCEED model for health programme planning. The model was employed to systematically determine influential and interactive factors which facilitated the integration process at different levels of the Ministry of Health and the community. Overall surveillance performance improved from 46 to 84 on a 100 point-scale. Schoolchildren's attitude (risk awareness) score significantly increased from 77 to 83 points. Seroprevalence declined from 3.4% to 0.4%. Health centres responded to the community bug reports by insecticide spraying. As key factors, the health centres had potential management capacity and influence over the inhabitants' behaviours and living environment directly and through community health volunteers. The National Chagas Programme played an essential role in facilitating changes with adequate distribution of responsibilities, participatory modelling, training and, evaluation and advocacy. We found that Chagas disease vector surveillance can be integrated into the PHC service. Health centres demonstrated capacity to manage vector surveillance and improve performance, children's awareness, vector report-response and seroprevalence, once tasks were simplified to be performed by trained non-specialists and distributed among the stakeholders. Health systems integration requires health workers to perform beyond their usual responsibilities and acquire management skills. Integration of vector control is feasible and can contribute to strengthening the preventive capacity of the PHC service.

System for fuel rod removal from a reactor module

DOEpatents

Matchett, R.L.; Fodor, G.; Kikta, T.J.; Bacvinsicas, W.S.; Roof, D.R.; Nilsen, R.J.; Wilczynski, R.

1988-07-28

A robotic system for remote underwater withdrawal of the fuel rods from fuel modules of a light water breeder reactor includes a collet/grapple assembly for gripping and removing fuel rods in each module, which is positioned by use of a winch and a radial support means attached to a vertical support tube which is mounted over the fuel module. A programmable logic controller in conjunction with a microcomputer, provides control for the accurate positioning and pulling force of the rod grapple assembly. Closed circuit television cameras are provided which aid in operator interface with the robotic system. 7 figs.

System for fuel rod removal from a reactor module

DOEpatents

Matchett, Richard L.; Roof, David R.; Kikta, Thomas J.; Wilczynski, Rosemarie; Nilsen, Roy J.; Bacvinskas, William S.; Fodor, George

1990-01-01

A robotic system for remote underwater withdrawal of the fuel rods from fuel modules of a light water breeder reactor includes a collet/grapple assembly for gripping and removing fuel rods in each module, which is positioned by use of a winch and a radial support means attached to a vertical support tube which is mounted over the fuel module. A programmable logic controller in conjunction with a microcomputer, provides control for the accurate positioning and pulling force of the rod grapple assembly. Closed circuit television cameras are provided which aid in operator interface with the robotic system.

WeaselBoard :

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mulder, John C.; Schwartz, Moses Daniel; Berg, Michael J.

2013-10-01

Critical infrastructures, such as electrical power plants and oil refineries, rely on programmable logic controllers (PLCs) to control essential processes. State of the art security cannot detect attacks on PLCs at the hardware or firmware level. This renders critical infrastructure control systems vulnerable to costly and dangerous attacks. WeaselBoard is a PLC backplane analysis system that connects directly to the PLC backplane to capture backplane communications between modules. WeaselBoard forwards inter-module traffic to an external analysis system that detects changes to process control settings, sensor values, module configuration information, firmware updates, and process control program (logic) updates. WeaselBoard provides zero-daymore » exploit detection for PLCs by detecting changes in the PLC and the process. This approach to PLC monitoring is protected under U.S. Patent Application 13/947,887.« less

Programme development of drug abuse control in Baluchistan, Pakistan.

PubMed

Zaidi, S M; Ashraf, S M; Afridi, A A

1982-01-01

The drug abuse control programme in Baluchistan is inter-disciplinary and progressive. Its main thrust consists of constant vigilance on border check-points by law enforcement agencies, developing in-patient and out-patient facilities for treatment and rehabilitation of addicted persons, and a preventive education programme using the mass media and students from higher educational institutions.

The Integration of DCS I/O to an Existing PLC

NASA Technical Reports Server (NTRS)

Sadhukhan, Debashis; Mihevic, John

2013-01-01

At the NASA Glenn Research Center (GRC), Existing Programmable Logic Controller (PLC) I/O was replaced with Distributed Control System (DCS) I/O, while keeping the existing PLC sequence Logic. The reason for integration of the PLC logic and DCS I/O, along with the evaluation of the resulting system is the subject of this paper. The pros and cons of the old system and new upgrade are described, including operator workstation screen update times. Detail of the physical layout and the communication between the PLC, the DCS I/O and the operator workstations are illustrated. The complex characteristics of a central process control system and the plan to remove the PLC processors in future upgrades is also discussed.

Real-time plasma control based on the ISTTOK tomography diagnostica)

NASA Astrophysics Data System (ADS)

Carvalho, P. J.; Carvalho, B. B.; Neto, A.; Coelho, R.; Fernandes, H.; Sousa, J.; Varandas, C.; Chávez-Alarcón, E.; Herrera-Velázquez, J. J. E.

2008-10-01

The presently available processing power in generic processing units (GPUs) combined with state-of-the-art programmable logic devices benefits the implementation of complex, real-time driven, data processing algorithms for plasma diagnostics. A tomographic reconstruction diagnostic has been developed for the ISTTOK tokamak, based on three linear pinhole cameras each with ten lines of sight. The plasma emissivity in a poloidal cross section is computed locally on a submillisecond time scale, using a Fourier-Bessel algorithm, allowing the use of the output signals for active plasma position control. The data acquisition and reconstruction (DAR) system is based on ATCA technology and consists of one acquisition board with integrated field programmable gate array (FPGA) capabilities and a dual-core Pentium module running real-time application interface (RTAI) Linux. In this paper, the DAR real-time firmware/software implementation is presented, based on (i) front-end digital processing in the FPGA; (ii) a device driver specially developed for the board which enables streaming data acquisition to the host GPU; and (iii) a fast reconstruction algorithm running in Linux RTAI. This system behaves as a module of the central ISTTOK control and data acquisition system (FIRESIGNAL). Preliminary results of the above experimental setup are presented and a performance benchmarking against the magnetic coil diagnostic is shown.

The effectiveness of an emotion-focused educational programme in reducing diabetes distress in adults with Type 2 diabetes mellitus (VEMOFIT): a cluster randomized controlled trial.

PubMed

Chew, B H; Vos, R C; Stellato, R K; Ismail, M; Rutten, G E H M

2018-06-01

To evaluate the effectiveness of a brief, value-based emotion-focused educational programme (VEMOFIT) in Malay adults with Type 2 diabetes mellitus compared with a programme of active listening to participants' emotional experiences, social support and their opinion on the health clinic diabetes care services (attention control). Malay adults with severe diabetes distress [Diabetes Distress Scale (DDS-17) mean score ≥ 3] were included. VEMOFIT consisted of four biweekly group sessions, a booster session after 3 months and a follow-up 6 months post intervention. The attention control programme consisted of three sessions over the same period. Outcomes included diabetes distress, depressive symptoms, self-efficacy and disease control. Required total sample size was 165. Participants (n = 124) were randomized to either VEMOFIT (n = 53) or the attention control programme (n = 71). Participants had a mean (sd) age of 55.7 (9.7) years, median diabetes duration of 7.0 (8.0) years and mean HbA 1c level of 82 mmol/mol (9.7%). The mean DDS-17 level decreased significantly in both the VEMOFIT and the attention control programmes (3.4 to 2.9 vs. 3.1 to 2.7, respectively). The adjusted between-group DDS-17 difference was not significant [-0.01, 95% confidence interval (CI) -0.38, 0.35]. The proportion of individuals with severe diabetes distress decreased in both groups, from 89% to 47% vs. 69% to 39% (odds ratio 0.88; 95% CI 0.26, 2.90). Other outcomes did not differ between groups. Both interventions decreased diabetes distress significantly. The theory-based VEMOFIT programme was not superior to the attention control programme. The latter approach is a simpler way to decrease severe diabetes distress (Trial registration: NCT02730078; NMRR-15-1144-24803). © 2018 Diabetes UK.

Evaluation of the COPING parent online universal programme: study protocol for a pilot randomised controlled trial

PubMed Central

Owen, Dawn Adele; Griffith, Nia; Hutchings, Judy

2017-01-01

Trial sponsor Bangor University, Brigantia Building, College Road, Bangor, LL57 2AS, UK Introduction The COPING parent online universal programme is a web-based parenting intervention for parents of children aged 3-8 years with an interest in positive parenting. The programme focuses on strengthening parent-child relationships and encouraging positive child behaviour. This trial will evaluate whether the intervention is effective in increasing the use of positive parenting strategies outlined in the programme using parent report and blind observation measures. Methods and analysis This is a pilot randomised controlled trial with intervention and wait-list control conditions. The intervention is a 10-week online parenting programme to promote positive parent-child relations by teaching core social learning theory principles that encourage positive child behaviour, primarily through the use of praise and rewards. Health visitors and school nurses will circulate a recruitment poster to parents of children aged 3–8 years on their current caseloads. Recruitment posters will also be distributed via local primary schools and nurseries. Parents recruited to the trial will be randomised on a 2:1 ratio to intervention or wait-list control conditions (stratified according to child gender and age). The primary outcome measure is positive parenting as measured by a behavioural observation of parent-child interactions using the Dyadic Parent-Child Interaction Coding System. Secondary outcomes include parent report of child behaviour, and self-reported parental sense of competence, parenting behaviour and parental mental health. Data will be collected at baseline and 3 months later (postintervention) for all participants and 6 months postbaseline for the intervention group only. Analysis of covariance will be the main statistical method used. Ethics and dissemination The trial has received ethical approval from the NHS Betsi Cadwaladr University Health Board Ethics Committee (REC) and the School of Psychology, Bangor University REC (15/WA/0463). Publication of all outcomes will be in peer-reviewed journals and conference presentations. Trial registration number Current Controlled Trials ISRCTN89370147 (5 May 2016). PMID:28446523

Effect of Sex Education Programme on at-risk sexual behaviour of school-going adolescents in Ilorin, Nigeria.

PubMed

Esere, Mary Ogechi

2008-06-01

Adolescents display sexual behaviours and developmental characteristics that place them at risk for Sexually Transmitted Diseases (STDs). Because young people experiment sexually and because of the consequences of indiscriminate sexual activities on the youth, there is the need to mount sex education programmes that are geared towards enlightenment and appropriate education about sex and sexuality. To determine whether Sex Education Intervention Programme would reduce at-risk sexual behaviours of school-going adolescents. Pre-test, post-test control group quasi-experimental design. A randomly selected co-educational school in Ilorin Metropolis, Nigeria. 24 school-going adolescents aged 13-19 years. Sex Education Programme (treatment group) versus Control programme (placebo). Self-reported exposure to sexually transmitted diseases, multiple sex partners, anal sex, oral sex, non use of condom. When the treatment (intervention) group was compared with the control group in an intention to treat analysis, there were significant differences in at-risk sexual behaviours of the two groups. Those in the intervention group reported less at-risk sexual behaviours than their counterparts in the control group. The treatment group evaluated the intervention programme positively and their knowledge of sexual health improved. Lack of behavioural effect on the control group could be linked to differential quality of delivery of intervention. Compared with the control group, this specially designed intervention sex education programme reduced at-risk sexual behaviour in adolescents. Based on this finding, it was recommended that sex education be introduced into the curriculum of secondary school education in Nigeria.

Efficacy of a multicomponent support programme for the caregivers of disabled persons: a randomised controlled study.

PubMed

Ryynänen, O-P; Nousiainen, P; Soini, E J O; Tuominen, S

2013-07-01

The goal of the present work was to measure the efficacy of a multicomponent programme designed to provide tailored support for the caregivers of disabled persons. A total of 135 caregivers-care receiver dyads were randomly divided into an intervention group (n = 66) and a control group (n = 69). One-third of the care receivers were demented, and two-thirds had other diseases. Health centres (publicly funded primary health care systems) in 8 rural and urban communities in southeast Finland. The multicomponent support programme for the caregivers consisted of a 2-week rehabilitation period. The control group received standard care. Continuation of the caregiver and care receiver relationship, care receiver mortality at the 2-year follow-up as well as the health-related quality of life (15D scale) and Zung's depression scale of the caregiver at the 1-year follow-up were evaluated. At the 2-year follow-up, the caregiver-care receiver relationship was terminated for any reason in 11 cases (17%) in the intervention group, and in 25 cases (36%) in the control group. After adjusting, the primary outcome (i.e., termination of care giving for any reason) indicated statistical significance (p = 0.04) with a hazard rate of 1.83 (95% confidence interval 1.03-3.29). With a similar adjustment, the difference in mortality and placement to institutional care between the two groups demonstrated a trend towards statistical significance. The caregivers' health, as related to quality of life and depressive symptoms, remained unchanged in both groups at the 1-year follow-up. These results indicate that a tailored support programme for caregivers may help the caregiver to continue the caregiver-care receiver relationship and delay institutionalization.

Towards the Formal Verification of a Distributed Real-Time Automotive System

NASA Technical Reports Server (NTRS)

Endres, Erik; Mueller, Christian; Shadrin, Andrey; Tverdyshev, Sergey

2010-01-01

We present the status of a project which aims at building, formally and pervasively verifying a distributed automotive system. The target system is a gate-level model which consists of several interconnected electronic control units with independent clocks. This model is verified against the specification as seen by a system programmer. The automotive system is implemented on several FPGA boards. The pervasive verification is carried out using combination of interactive theorem proving (Isabelle/HOL) and model checking (LTL).

An evaluation of the Parents Plus-Parenting When Separated programme.

PubMed

Keating, Adele; Sharry, John; Murphy, Michelle; Rooney, Brendan; Carr, Alan

2016-04-01

This study evaluated the Parents Plus-Parenting when Separated Programme, an intervention specifically designed to address the needs of separated parents in an Irish context. In a randomized control trial, 82 separated parents with young children were assigned to the Parents Plus-Parenting when Separated Programme treatment group and 79 to a waiting-list control group. They were assessed on measures of client goals, parenting satisfaction, child and parental adjustment and interparental conflict at baseline (Time 1) and 6 weeks later (Time 2), after the treatment group completed the Parents Plus-Parenting when Separated Programme. From Time 1 to 2, significant goal attainment, increases in parenting satisfaction and decreases in child behaviour problems, parental adjustment problems and interparental conflict occurred in the Parents Plus-Parenting when Separated Programme group, but not in the control group. These results supported the effectiveness of Parents Plus-Parenting when Separated Programme, which should be made more widely available to separated parents. © The Author(s) 2015.

From malaria control to eradication: The WHO perspective.

PubMed

Mendis, Kamini; Rietveld, Aafje; Warsame, Marian; Bosman, Andrea; Greenwood, Brian; Wernsdorfer, Walther H

2009-07-01

Efforts to control malaria have been boosted in the past few years with increased international funding and greater political commitment. Consequently, the reported malaria burden is being reduced in a number of countries throughout the world, including in some countries in tropical Africa where the burden of malaria is greatest. These achievements have raised new hopes of eradicating malaria. This paper summarizes the outcomes of a World Health Organization's expert meeting on the feasibility of such a goal. Given the hindsight and experience of the Global Malaria Eradication Programme of the 1950s and 1960s, and current knowledge of the effectiveness of antimalarial tools and interventions, it would be feasible to effectively control malaria in all parts of the world and greatly reduce the enormous morbidity and mortality of malaria. It would also be entirely feasible to eliminate malaria from countries and regions where the intensity of transmission is low to moderate, and where health systems are strong. Elimination of malaria requires a re-orientation of control activity, moving away from a population-based coverage of interventions, to one based on a programme of effective surveillance and response. Sustained efforts will be required to prevent the resurgence of malaria from where it is eliminated. Eliminating malaria from countries where the intensity of transmission is high and stable such as in tropical Africa will require more potent tools and stronger health systems than are available today. When such countries have effectively reduced the burden of malaria, the achievements will need to be consolidated before a programme re-orientation towards malaria elimination is contemplated. Malaria control and elimination are under the constant threat of the parasite and vector mosquito developing resistance to medicines and insecticides, which are the cornerstones of current antimalarial interventions. The prospects of malaria eradication, therefore, rest heavily on the outcomes of research and development for new and improved tools. Malaria control and elimination are complementary objectives in the global fight against malaria.

System and Mass Storage Study for Defense Mapping Agency Topographic Center (DMATC/HC)

DTIC Science & Technology

1977-04-01

34•»-—•—■»■—- view. The assessment should be based on carefully designed control condi- tions—data volume, resolution, function, etc...egories: hardware control and library management support. This software is designed to interface with IBM 360/370 OS and OS/VS. No interface with a...laser re- cording unit includes a programmable recorder control subsystem which can be designed to provide a hardware and software interface compatible

An application of Extended Normalisation Process Theory in a randomised controlled trial of a complex social intervention: Process evaluation of the Strengthening Families Programme (10-14) in Wales, UK.

PubMed

Segrott, Jeremy; Murphy, Simon; Rothwell, Heather; Scourfield, Jonathan; Foxcroft, David; Gillespie, David; Holliday, Jo; Hood, Kerenza; Hurlow, Claire; Morgan-Trimmer, Sarah; Phillips, Ceri; Reed, Hayley; Roberts, Zoe; Moore, Laurence

2017-12-01

Process evaluations generate important data on the extent to which interventions are delivered as intended. However, the tendency to focus only on assessment of pre-specified structural aspects of fidelity has been criticised for paying insufficient attention to implementation processes and how intervention-context interactions influence programme delivery. This paper reports findings from a process evaluation nested within a randomised controlled trial of the Strengthening Families Programme 10-14 (SFP 10-14) in Wales, UK. It uses Extended Normalisation Process Theory to theorise how interaction between SFP 10-14 and local delivery systems - particularly practitioner commitment/capability and organisational capacity - influenced delivery of intended programme activities: fidelity (adherence to SFP 10-14 content and implementation requirements); dose delivered; dose received (participant engagement); participant recruitment and reach (intervention attendance). A mixed methods design was utilised. Fidelity assessment sheets (completed by practitioners), structured observation by researchers, and routine data were used to assess: adherence to programme content; staffing numbers and consistency; recruitment/retention; and group size and composition. Interviews with practitioners explored implementation processes and context. Adherence to programme content was high - with some variation, linked to practitioner commitment to, and understanding of, the intervention's content and mechanisms. Variation in adherence rates was associated with the extent to which multi-agency delivery team planning meetings were held. Recruitment challenges meant that targets for group size/composition were not always met, but did not affect adherence levels or family engagement. Targets for staffing numbers and consistency were achieved, though capacity within multi-agency networks reduced over time. Extended Normalisation Process Theory provided a useful framework for assessing implementation and explaining variation by examining intervention-context interactions. Findings highlight the need for process evaluations to consider both the structural and process components of implementation to explain whether programme activities are delivered as intended and why.

Antagonistic control of a dual-input mammalian gene switch by food additives.

PubMed

Xie, Mingqi; Ye, Haifeng; Hamri, Ghislaine Charpin-El; Fussenegger, Martin

2014-08-01

Synthetic biology has significantly advanced the design of mammalian trigger-inducible transgene-control devices that are able to programme complex cellular behaviour. Fruit-based benzoate derivatives licensed as food additives, such as flavours (e.g. vanillate) and preservatives (e.g. benzoate), are a particularly attractive class of trigger compounds for orthogonal mammalian transgene control devices because of their innocuousness, physiological compatibility and simple oral administration. Capitalizing on the genetic componentry of the soil bacterium Comamonas testosteroni, which has evolved to catabolize a variety of aromatic compounds, we have designed different mammalian gene expression systems that could be induced and repressed by the food additives benzoate and vanillate. When implanting designer cells engineered for gene switch-driven expression of the human placental secreted alkaline phosphatase (SEAP) into mice, blood SEAP levels of treated animals directly correlated with a benzoate-enriched drinking programme. Additionally, the benzoate-/vanillate-responsive device was compatible with other transgene control systems and could be assembled into higher-order control networks providing expression dynamics reminiscent of a lap-timing stopwatch. Designer gene switches using licensed food additives as trigger compounds to achieve antagonistic dual-input expression profiles and provide novel control topologies and regulation dynamics may advance future gene- and cell-based therapies. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

Effect of a group-based rehabilitation programme on glycaemic control and cardiovascular risk factors in type 2 diabetes patients: the Copenhagen Type 2 Diabetes Rehabilitation Project.

PubMed

Vadstrup, Eva Soelberg; Frølich, Anne; Perrild, Hans; Borg, Eva; Røder, Michael

2011-08-01

To compare the effectiveness of a group-based rehabilitation programme with an individual counselling programme at improving glycaemic control and cardiovascular risk factors among patients with type 2 diabetes. We randomised 143 adult type 2 diabetes patients to either a 6-month multidisciplinary group-based rehabilitation programme or a 6-month individual counselling programme. Outcome measures included glycated haemoglobin (HbA(1c)), blood pressure, lipid profile, weight, and waist circumference. Mean HbA(1c) decreased 0.3%-point (95% confidence interval [CI] = -0.5, -0.1) in the rehabilitation group and 0.6%-point (95% CI = -0.8, -0.4) among individual counselling participants (p<0.05). Within both groups, equal reductions occurred in body weight, waist circumference, systolic blood pressure and diastolic blood pressure, but no significant between-group differences between occurred for any of the cardiovascular outcomes. The group-based rehabilitation programme consumed twice as many personnel resources. The group-based rehabilitation programme resulted in changes in glycaemic control and cardiovascular risk factor reduction that were equivalent or inferior to those of an individual counselling programme. The group-based rehabilitation programme, tested in the current design, did not offer additionally improved outcomes and consumed more personnel resources than the individual counselling programme; its broad implementation is not supported by this study. Trial registration Clinicaltrials.gov NCT00284609. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Research of vibration controlling based on programmable logic controller for electrostatic precipitator

NASA Astrophysics Data System (ADS)

Zhang, Zisheng; Li, Yanhu; Li, Jiaojiao; Liu, Zhiqiang; Li, Qing

2013-03-01

In order to improve the reliability, stability and automation of electrostatic precipitator, circuits of vibration motor for ESP and vibration control ladder diagram program are investigated using Schneider PLC with high performance and programming software of Twidosoft. Operational results show that after adopting PLC, vibration motor can run automatically; compared with traditional control system of vibration based on single-chip microcomputer, it has higher reliability, better stability and higher dust removal rate, when dust emission concentrations <= 50 mg m-3, providing a new method for vibration controlling of ESP.

Evaluation of a nurse-led dementia education and knowledge translation programme in primary care: A cluster randomized controlled trial.

PubMed

Wang, Yao; Xiao, Lily Dongxia; Ullah, Shahid; He, Guo-Ping; De Bellis, Anita

2017-02-01

The lack of dementia education programmes for health professionals in primary care is one of the major factors contributing to the unmet demand for dementia care services. To determine the effectiveness of a nurse-led dementia education and knowledge translation programme for health professionals in primary care; participants' satisfaction with the programme; and to understand participants' perceptions of and experiences in the programme. A cluster randomized controlled trial was used as the main methodology to evaluate health professionals' knowledge, attitudes and care approach. Focus groups were used at the end of the project to understand health professionals' perceptions of and experiences in the programme. Fourteen community health service centres in a province in China participated in the study. Seven centres were randomly assigned to the intervention or control group respectively and 85 health professionals in each group completed the programme. A train-the-trainer model was used to implement a dementia education and knowledge translation programme. Outcome variables were measured at baseline, on the completion of the programme and at 3-month follow-up. A mixed effect linear regression model was applied to compare the significant differences of outcome measures over time between the two groups. Focus groups were guided by four semi-structured questions and analysed using content analysis. Findings revealed significant effects of the education and knowledge translation programme on participants' knowledge, attitudes and a person-centred care approach. Focus groups confirmed that the programme had a positive impact on dementia care practice. A dementia education and knowledge translation programme for health professionals in primary care has positive effects on their knowledge, attitudes, care approach and care practice. Copyright © 2016 Elsevier Ltd. All rights reserved.

Implementing large-scale programmes to optimise the health workforce in low- and middle-income settings: a multicountry case study synthesis.

PubMed

Gopinathan, Unni; Lewin, Simon; Glenton, Claire

2014-12-01

To identify factors affecting the implementation of large-scale programmes to optimise the health workforce in low- and middle-income countries. We conducted a multicountry case study synthesis. Eligible programmes were identified through consultation with experts and using Internet searches. Programmes were selected purposively to match the inclusion criteria. Programme documents were gathered via Google Scholar and PubMed and from key informants. The SURE Framework - a comprehensive list of factors that may influence the implementation of health system interventions - was used to organise the data. Thematic analysis was used to identify the key issues that emerged from the case studies. Programmes from Brazil, Ethiopia, India, Iran, Malawi, Venezuela and Zimbabwe were selected. Key system-level factors affecting the implementation of the programmes were related to health worker training and continuing education, management and programme support structures, the organisation and delivery of services, community participation, and the sociopolitical environment. Existing weaknesses in health systems may undermine the implementation of large-scale programmes to optimise the health workforce. Changes in the roles and responsibilities of cadres may also, in turn, impact the health system throughout. © 2014 John Wiley & Sons Ltd.

The ALICE-HMPID Detector Control System: Its evolution towards an expert and adaptive system

NASA Astrophysics Data System (ADS)

De Cataldo, G.; Franco, A.; Pastore, C.; Sgura, I.; Volpe, G.

2011-05-01

The High Momentum Particle IDentification (HMPID) detector is a proximity focusing Ring Imaging Cherenkov (RICH) for charged hadron identification. The HMPID is based on liquid C 6F 14 as the radiator medium and on a 10 m 2 CsI coated, pad segmented photocathode of MWPCs for UV Cherenkov photon detection. To ensure full remote control, the HMPID is equipped with a detector control system (DCS) responding to industrial standards for robustness and reliability. It has been implemented using PVSS as Slow Control And Data Acquisition (SCADA) environment, Programmable Logic Controller as control devices and Finite State Machines for modular and automatic command execution. In the perspective of reducing human presence at the experiment site, this paper focuses on DCS evolution towards an expert and adaptive control system, providing, respectively, automatic error recovery and stable detector performance. HAL9000, the first prototype of the HMPID expert system, is then presented. Finally an analysis of the possible application of the adaptive features is provided.

New controller for high voltage converter modulator at spallation neutron source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wezensky, Mark W; Brown, David L; Lee, Sung-Woo

2017-01-01

The Spallation Neutron Source (SNS) has developed a new control system for the High Voltage Convertor Modulator (HVCM) at the SNS to replace the original control system which is approaching obsolescence. The original system was based on controllers for similar high voltage systems that were already in use [1]. The new controller, based on National Instruments PXI/FlexRIO Field Programmable Gate Array (FPGA) platform, offers enhancements such as modular construction, flexibility and non-proprietary software. The new controller also provides new capabilities like various methods for modulator pulse flattening, waveform capture, and first fault detection. This paper will discuss the design ofmore » the system, including the human machine interface, based on lessons learned at the SNS and other projects. It will also discuss performance and other issues related to its operation in an accelerator facility which requires high availability. To date, 73% of the operational HVCMs have been upgraded to with the new controller, and the remainder are scheduled for completion by mid-2017.« less

Arizona's tobacco control initiative illustrates the need for continuing oversight by tobacco control advocates

PubMed Central

Bialous, S. A.; Glantz, S.

1999-01-01

BACKGROUND—In 1994, Arizona voters approved Proposition 200 which increased the tobacco tax and earmarked 23% of the new revenues for tobacco education programmes.
OBJECTIVE—To describe the campaign to pass Proposition 200, the legislative debate that followed the passage of the initiative, and the development and implementation of the tobacco control programme.
DESIGN—This is a case study. Data were collected through semi-structured interviews with key players in the initiative campaign and in the tobacco education programme, and written records (campaign material, newspapers, memoranda, public records).
RESULTS—Despite opposition from the tobacco industry, Arizonans approved an increase in the tobacco tax. At the legislature, health advocates in Arizona successfully fought the tobacco industry attempts to divert the health education funds and pass preemptive legislation. The executive branch limited the scope of the programme to adolescents and pregnant women. It also prevented the programme from attacking the tobacco industry or focusing on secondhand smoke. Health advocates did not put enough pressure at the executive branch to force it to develop a comprehensive tobacco education programme.
CONCLUSIONS—It is not enough for health advocates to campaign for an increase in tobacco tax and to protect the funds at the legislature. Tobacco control advocates must closely monitor the development and implementation of tax-funded tobacco education programmes at the administrative level and be willing to press the executive to implement effective programmes.


Keywords: tobacco tax; health education; advocacy PMID:10478397

Integrating national community-based health worker programmes into health systems: a systematic review identifying lessons learned from low-and middle-income countries.

PubMed

Zulu, Joseph Mumba; Kinsman, John; Michelo, Charles; Hurtig, Anna-Karin

2014-09-22

Despite the development of national community-based health worker (CBHW) programmes in several low- and middle-income countries, their integration into health systems has not been optimal. Studies have been conducted to investigate the factors influencing the integration processes, but systematic reviews to provide a more comprehensive understanding are lacking. We conducted a systematic review of published research to understand factors that may influence the integration of national CBHW programmes into health systems in low- and middle-income countries. To be included in the study, CBHW programmes should have been developed by the government and have standardised training, supervision and incentive structures. A conceptual framework on the integration of health innovations into health systems guided the review. We identified 3410 records, of which 36 were finally selected, and on which an analysis was conducted concerning the themes and pathways associated with different factors that may influence the integration process. Four programmes from Brazil, Ethiopia, India and Pakistan met the inclusion criteria. Different aspects of each of these programmes were integrated in different ways into their respective health systems. Factors that facilitated the integration process included the magnitude of countries' human resources for health problems and the associated discourses about how to address these problems; the perceived relative advantage of national CBHWs with regard to delivering health services over training and retaining highly skilled health workers; and the participation of some politicians and community members in programme processes, with the result that they viewed the programmes as legitimate, credible and relevant. Finally, integration of programmes within the existing health systems enhanced programme compatibility with the health systems' governance, financing and training functions. Factors that inhibited the integration process included a rapid scale-up process; resistance from other health workers; discrimination of CBHWs based on social, gender and economic status; ineffective incentive structures; inadequate infrastructure and supplies; and hierarchical and parallel communication structures. CBHW programmes should design their scale-up strategy differently based on current contextual factors. Further, adoption of a stepwise approach to the scale-up and integration process may positively shape the integration process of CBHW programmes into health systems.

The effects of a three-year smoking prevention programme in secondary schools in Helsinki.

PubMed

Vartiainen, Erkki; Pennanen, Marjaana; Haukkala, Ari; Dijk, Froukje; Lehtovuori, Riku; De Vries, Hein

2007-06-01

This study evaluates the effects of a 3-year smoking prevention programme in secondary schools in Helsinki. The study is part of the European Smoking prevention Framework Approach (ESFA), in which Denmark, Finland, the Netherlands, Portugal, Spain and the UK participated. A total of 27 secondary schools in Finland participated in the programme (n = 1821). Schools were randomised into experimental (13) and control groups (14). The programme included 14 information lessons about smoking and refusal skills training. The 3-year smoking prevention programme was also integrated into the standard curriculum. The community-element of the programme included parents, parish confirmation camps and dentists. The schools in the experimental group received the prevention programme and the schools in the control group received the standard health education curriculum. Among baseline never smokers (60.8%), the programme had a significant effect on the onset of weekly smoking in the experimental group [OR = 0.63 (0.45-0.90) P = 0.009] when compared with the control group. Being female, doing poorly at school, having parents and best friends who smoke and more pocket money to spend compared with others were associated with an increased likelihood of daily and weekly smoking onset. These predictors did not have an interaction effect with the experimental condition. This study shows that a school- and community-based smoking prevention programme can prevent smoking onset among adolescents.

Avionic Architecture for Model Predictive Control Application in Mars Sample & Return Rendezvous Scenario

NASA Astrophysics Data System (ADS)

Saponara, M.; Tramutola, A.; Creten, P.; Hardy, J.; Philippe, C.

2013-08-01

Optimization-based control techniques such as Model Predictive Control (MPC) are considered extremely attractive for space rendezvous, proximity operations and capture applications that require high level of autonomy, optimal path planning and dynamic safety margins. Such control techniques require high-performance computational needs for solving large optimization problems. The development and implementation in a flight representative avionic architecture of a MPC based Guidance, Navigation and Control system has been investigated in the ESA R&T study “On-line Reconfiguration Control System and Avionics Architecture” (ORCSAT) of the Aurora programme. The paper presents the baseline HW and SW avionic architectures, and verification test results obtained with a customised RASTA spacecraft avionics development platform from Aeroflex Gaisler.

Programmable control of bacterial gene expression with the combined CRISPR and antisense RNA system

PubMed Central

Lee, Young Je; Hoynes-O'Connor, Allison; Leong, Matthew C.; Moon, Tae Seok

2016-01-01

A central goal of synthetic biology is to implement diverse cellular functions by predictably controlling gene expression. Though research has focused more on protein regulators than RNA regulators, recent advances in our understanding of RNA folding and functions have motivated the use of RNA regulators. RNA regulators provide an advantage because they are easier to design and engineer than protein regulators, potentially have a lower burden on the cell and are highly orthogonal. Here, we combine the CRISPR system from Streptococcus pyogenes and synthetic antisense RNAs (asRNAs) in Escherichia coli strains to repress or derepress a target gene in a programmable manner. Specifically, we demonstrate for the first time that the gene target repressed by the CRISPR system can be derepressed by expressing an asRNA that sequesters a small guide RNA (sgRNA). Furthermore, we demonstrate that tunable levels of derepression can be achieved (up to 95%) by designing asRNAs that target different regions of a sgRNA and by altering the hybridization free energy of the sgRNA–asRNA complex. This new system, which we call the combined CRISPR and asRNA system, can be used to reversibly repress or derepress multiple target genes simultaneously, allowing for rational reprogramming of cellular functions. PMID:26837577

Design of low-cost general purpose microcontroller based neuromuscular stimulator.

PubMed

Koçer, S; Rahmi Canal, M; Güler, I

2000-04-01

In this study, a general purpose, low-cost, programmable, portable and high performance stimulator is designed and implemented. For this purpose, a microcontroller is used in the design of the stimulator. The duty cycle and amplitude of the designed system can be controlled using a keyboard. The performance test of the system has shown that the results are reliable. The overall system can be used as the neuromuscular stimulator under safe conditions.

Evaluating the Level of Degree Programmes in Higher Education: Conceptual Design

ERIC Educational Resources Information Center

Rexwinkel, Trudy; Haenen, Jacques; Pilot, Albert

2013-01-01

Evaluating the level of degree programmes became crucial with the Bologna Agreement in 1999 when European ministers agreed to implement common bachelor's and master's degree programmes and a common system of quality assurance. The European Quality Assurance system demands evaluation of the degree programme level based on valid and reliable…

Improving Educational Objectives of the Industrial and Management Systems Engineering Programme at Kuwait University

ERIC Educational Resources Information Center

Aldowaisan, Tariq; Allahverdi, Ali

2016-01-01

This paper describes the process of developing programme educational objectives (PEOs) for the Industrial and Management Systems Engineering programme at Kuwait University, and the process of deployment of these PEOs. Input of the four constituents of the programme, faculty, students, alumni, and employers, is incorporated in the development and…

Economic evaluation of smoke alarm distribution methods in Baltimore, Maryland.

PubMed

Diamond-Smith, Nadia; Bishai, David; Perry, Elise; Shields, Wendy; Gielen, Andrea

2014-08-01

This paper analyses costs and potential lives saved from a door-to-door smoke alarm distribution programme using data from a programme run by the Baltimore City Fire Department in 2010-2011. We evaluate the impact of a standard home visit programme and an enhanced home visit programme that includes having community health workers provide advance notice, promote the programme, and accompany fire department personnel on the day of the home visit, compared with each other and with an option of not having a home visit programme (control). Study data show that the home visit programme increased by 10% the number of homes that went from having no working alarm to having any working alarm, and the enhanced programme added an additional 1% to the number of homes protected. We use published reports on the relative risk of death in homes with and without a working smoke alarm to show that the standard programme would save an additional 0.24 lives per 10,000 homes over 10 years, compared with control areas and the enhanced home visit programme saved an additional 0.07 lives compared with the standard programme. The incremental cost of each life saved for the standard programme compared with control was $28,252 per death averted and $284,501per additional death averted for the enhanced compared with the standard. Following the US guidelines for the value of a life, both programmes are cost effective, however, the standard programme may offer a better value in terms of dollars per death averted. The study also highlights the need for better data on the benefits of current smoke alarm recommendations and their impact on injury, death and property damage. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Control system renewal for efficient operation in RIKEN 18 GHz electron cyclotron resonance ion source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Uchiyama, A., E-mail: a-uchi@riken.jp; Ozeki, K.; Higurashi, Y.

A RIKEN 18 GHz electron cyclotron resonance ion source (18 GHz ECRIS) is used as an external ion source at the Radioactive Ion Beam Factory (RIBF) accelerator complex to produce an intense beam of medium-mass heavy ions (e.g., Ca and Ar). In most components that comprise the RIBF, the control systems (CSs) are integrated by the Experimental Physics and Industrial Control System (EPICS). On the other hand, a non-EPICS-based system has hardwired controllers, and it is used in the 18 GHz ECRIS CS as an independent system. In terms of efficient and effective operation, the 18 GHz ECRIS CS asmore » well as the RIBF CS should be renewed using EPICS. Therefore, we constructed an 18 GHz ECRIS CS by using programmable logic controllers with embedded EPICS technology. In the renewed system, an operational log system was developed as a new feature, for supporting of the 18 GHz ECRIS operation.« less

Perceived Effects of the Malaysian National Tobacco Control Programme on Adolescent Smoking Cessation: A Qualitative Study

PubMed Central

Hizlinda, Tohid; Noriah, Mohd Ishak; Noor Azimah, Muhammad; Farah Naaz, Momtaz Ahmad; Anis Ezdiana, Abdul Aziz; Khairani, Omar

2012-01-01

Background: The prevalence of teenage smoking has decreased over the past decade following the implementation of the national tobacco control programme. However, the effect of the programme on smoking cessation in teenagers has not been determined. Methods: Twenty-eight participants (12 teenagers, 8 teachers, and 8 doctors) were interviewed using 5 in-depth interviews and 3 group discussions. Social cognitive theory (SCT) was applied as the theoretical framework. Semi-structured interview protocols were used, and thematic analysis and analytic generalisation utilising SCT were performed. Results: The current national tobacco control programme was found to be ineffective in promoting smoking cessation among teenagers. The participants attributed the ineffective campaign to the followings: inadequacy of message content, lack of exposure to the programme, and poor presentation and execution. In addition, the participants perceived the developed tobacco control policies to be a failure based on poor law enforcement, failure of retailers to comply with the law, social availability of cigarettes to teenagers, and easy availability of cheap, smuggled cigarettes. This study highlighted that the programme-related problems (environmental factors) were not the only factors contributing to its perceived ineffectiveness. The cunning behaviour of the teenagers (personal factor) and poor self-efficacy to overcome nicotine addiction (behavioural factor) were also found to hinder cessation. Conclusion: Tobacco control programmes should include strategies beyond educating teenagers about smoking and restricting their access to cigarettes. Strategies to manage the cunning behaviour of teenagers and strategies to improve their self-efficacy should also be implemented. These comprehensive programmes should have a foundation in SCT, as this theory demonstrates the complex interactions among the environmental, personal, and behavioural factors that influence teenage smoking. PMID:22973136

Perceived effects of the Malaysian National Tobacco Control Programme on adolescent smoking cessation: a qualitative study.

PubMed

Tohid, Hizlinda; Ishak, Noriah Mohd; Muhammad, Noor Azimah; Ahmad, Farah Naaz Momtaz; Aziz, Abdul Anis Ezdiana; Omar, Khairani

2012-04-01

The prevalence of teenage smoking has decreased over the past decade following the implementation of the national tobacco control programme. However, the effect of the programme on smoking cessation in teenagers has not been determined. Twenty-eight participants (12 teenagers, 8 teachers, and 8 doctors) were interviewed using 5 in-depth interviews and 3 group discussions. Social cognitive theory (SCT) was applied as the theoretical framework. Semi-structured interview protocols were used, and thematic analysis and analytic generalisation utilising SCT were performed. The current national tobacco control programme was found to be ineffective in promoting smoking cessation among teenagers. The participants attributed the ineffective campaign to the followings: inadequacy of message content, lack of exposure to the programme, and poor presentation and execution. In addition, the participants perceived the developed tobacco control policies to be a failure based on poor law enforcement, failure of retailers to comply with the law, social availability of cigarettes to teenagers, and easy availability of cheap, smuggled cigarettes. This study highlighted that the programme-related problems (environmental factors) were not the only factors contributing to its perceived ineffectiveness. The cunning behaviour of the teenagers (personal factor) and poor self-efficacy to overcome nicotine addiction (behavioural factor) were also found to hinder cessation. Tobacco control programmes should include strategies beyond educating teenagers about smoking and restricting their access to cigarettes. Strategies to manage the cunning behaviour of teenagers and strategies to improve their self-efficacy should also be implemented. These comprehensive programmes should have a foundation in SCT, as this theory demonstrates the complex interactions among the environmental, personal, and behavioural factors that influence teenage smoking.

Malaria vector control at a crossroads: public health entomology and the drive to elimination.

PubMed

Mnzava, Abraham P; Macdonald, Michael B; Knox, Tessa B; Temu, Emmanuel A; Shiff, Clive J

2014-09-01

Vector control has been at the core of successful malaria control. However, a dearth of field-oriented vector biologists threatens to undermine global reductions in malaria burden. Skilled cadres are needed to manage insecticide resistance, to maintain coverage with current interventions, to develop new paradigms for tackling 'residual' transmission and to target interventions as transmission becomes increasingly heterogeneous. Recognising this human resource crisis, in September 2013, WHO Global Malaria Programme issued guidance for capacity building in entomology and vector control, including recommendations for countries and implementing partners. Ministries were urged to develop long-range strategic plans for building human resources for public health entomology and vector control (including skills in epidemiology, geographic information systems, operational research and programme management) and to set in place the requisite professional posts and career opportunities. Capacity building and national ownership in all partner projects and a clear exit strategy to sustain human and technical resources after project completion were emphasised. Implementing partners were urged to support global and regional efforts to enhance public health entomology capacity. While the challenges inherent in such capacity building are great, so too are the opportunities to establish the next generation of public health entomologists that will enable programmes to continue on the path to malaria elimination. © The Author 2014. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Interfacing the Controllogics PLC over Ethernet/IP.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kasemir, K. U.; Dalesio, L. R.

2001-01-01

The Allen-Bradley ControlLogix [1] line of programmable logic controllers (PLCs) offers several interfaces: Ethernet, ControlNet, DeviceNet, RS-232 and others. The ControlLogix Ethernet interface module 1756-ENET uses EtherNet/IP, the ControlNet protocol [2], encapsulated in Ethernet packages, with specific service codes [3]. A driver for the Experimental Physics and Industrial Control System (EPICS) has been developed that utilizes this EtherNet/IP protocol for controllers running the vxWorks RTOS as well as a Win32 and Unix/Linux test program. Features, performance and limitations of this interface are presented.

Translating childhood tuberculosis case management research into operational policies.

PubMed

Safdar, N; Hinderaker, S G; Baloch, N A; Enarson, D A; Khan, M A; Morkve, O

2011-08-01

The control of childhood tuberculosis (TB) has been of low priority in TB programmes in high-burden settings. The objective of this paper was to describe the development and testing of tools for the management of childhood TB. The Pakistan National TB Control Programme embarked on a number of activities, including the establishment of policy guidelines for the management of childhood TB and later a guidance document, 'Case Management Desk Guide and Structured Monitoring', to demonstrate the implementation of childhood TB interventions in a programme context. Initial results showed improved case finding and treatment outcome in implementation sites compared with control districts. However, further programme attention is required to improve quality.

Research and realization of signal simulation on virtual instrument

NASA Astrophysics Data System (ADS)

Zhao, Qi; He, Wenting; Guan, Xiumei

2010-02-01

In the engineering project, arbitrary waveform generator controlled by software interface is needed by simulation and test. This article discussed the program using the SCPI (Standard Commands For Programmable Instruments) protocol and the VISA (Virtual Instrument System Architecture) library to control the Agilent signal generator (Agilent N5182A) by instrument communication over the LAN interface. The program can conduct several signal generations such as CW (continuous wave), AM (amplitude modulation), FM (frequency modulation), ΦM (phase modulation), Sweep. As the result, the program system has good operability and portability.

Using archived ITS data to measure the operational benefits of a system-wide adaptive ramp metering system : appendix online\\0x20106: OR\\0x2010217 NB time-space speed contour plots with meter activations.

DOT National Transportation Integrated Search

2008-12-01

Programmable logic controllers (PLCs) were installed at several key ramps with the assistance of the City of Portland and used to capture additional data about ramp operations that are not otherwise logged. The data include include the activation and...

Linking consistency with object/thread semantics - An approach to robust computation

NASA Technical Reports Server (NTRS)

Chen, Raymond C.; Dasgupta, Partha

1989-01-01

This paper presents an object/thread based paradigm that links data consistency with object/thread semantics. The paradigm can be used to achieve a wide range of consistency semantics from strict atomic transactions to standard process semantics. The paradigm supports three types of data consistency. Object programmers indicate the type of consistency desired on a per-operation basis and the system performs automatic concurrency control and recovery management to ensure that those consistency requirements are met. This allows programmers to customize consistency and recovery on a per-application basis without having to supply complicated, custom recovery management schemes. The paradigm allows robust and nonrobust computation to operate concurrently on the same data in a well defined manner. The operating system needs to support only one vehicle of computation - the thread.

Electrical deaths in the US construction: an analysis of fatality investigations.

PubMed

Zhao, Dong; Thabet, Walid; McCoy, Andrew; Kleiner, Brian

2014-01-01

Electrocution is among the 'fatal four' in US construction according to the Occupational Safety and Health Administration. Learning from failures is believed to be an effective path to success, with deaths being the most serious system failures. This paper examined the failures in electrical safety by analysing all electrical fatality investigations (N = 132) occurring between 1989 and 2010 from the Fatality Assessment and Control Evaluation programme that is completed by the National Institute of Occupational Safety and Health. Results reveal the features of the electrical fatalities in construction and disclose the most common electrical safety challenges on construction sites. This research also suggests the sociotechnical system breakdowns and the less effectiveness of current safety training programmes may significantly contribute to worker's unsafe behaviours and electrical fatality occurrences.

Development and flight qualification of the C-SiC thermal protection systems for the IXV

NASA Astrophysics Data System (ADS)

Buffenoir, François; Zeppa, Céline; Pichon, Thierry; Girard, Florent

2016-07-01

The Intermediate experimental Vehicle (IXV) atmospheric re-entry demonstrator, developed within the FLPP (Future Launcher Preparatory Programme) and funded by ESA, aimed at developing a demonstration vehicle that gave Europe a unique opportunity to increase its knowledge in the field of advanced atmospheric re-entry technologies. A key technology that has been demonstrated in real conditions through the flight of this ambitious vehicle is the thermal protection system (TPS) of the Vehicle. Within this programme, HERAKLES, Safran Group, has been in charge of the TPS of the windward and nose assemblies of the vehicle, and has developed and manufactured SepcarbInox® ceramic matrix composite (CMC) protection systems that provided a high temperature resistant non ablative outer mould line (OML) for enhanced aerodynamic control. The design and flight justification of these TPS has been achieved through extensive analysis and testing:

Field testing of a next generation pointer/tracker for IRCM

NASA Astrophysics Data System (ADS)

Chapman, Stuart; Wildgoose, Iain; McDonald, Eric; Duncan, Stuart

2008-10-01

SELEX Galileo has been involved in the development, manufacture and support of high performance electro-optic pointing and stabilisation systems for over forty years. The Company currently supplies the pointer/trackers for the AN/AAQ-24(V) NEMESIS DIRCM system, for which over 1,000 combat-proven units have been produced and deployed in the US, the UK and other nations. In 2007, SELEX Galileo embarked on an internally funded programme to develop ECLIPSE, a new advanced, lightweight, low-cost IRCM pointer/tracker, exploiting the extensive knowledge and experience gained from previous targeting and IRCM programmes. The ECLIPSE design is centred on a low inertia, two-axis servo mechanism with a strap-down inertial sensor and advanced sightline control algorithms, allowing effective tracking through the nadir and providing superior sightline performance. The programme involved the production of three demonstrator units in 2007, and two pre-production units in 2008. The demonstrator units were first trialled as part of a NEMESIS DIRCM system in late 2007, and in April 2008 100% success was achieved in jamming live-fire demonstrations. Helicopter installation and ground testing of a UK only trials system is complete, initial flight testing has just begun, and the airborne test and evaluation scheduled for late summer 2008 will bring the ECLIPSE System to technology readiness to level 7 (TRL7). This paper describes the Eclipse performance demonstrated to date.

Coupling indoor airflow, HVAC, control and building envelope heat transfer in the Modelica Buildings library

DOE PAGES

Zuo, Wangda; Wetter, Michael; Tian, Wei; ...

2015-07-13

Here, this paper describes a coupled dynamic simulation of an indoor environment with heating, ventilation, and air conditioning (HVAC) systems, controls and building envelope heat transfer. The coupled simulation can be used for the design and control of ventilation systems with stratified air distributions. Those systems are commonly used to reduce building energy consumption while improving the indoor environment quality. The indoor environment was simulated using the fast fluid dynamics (FFD) simulation programme. The building fabric heat transfer, HVAC and control system were modelled using the Modelica Buildings library. After presenting the concept, the mathematical algorithm and the implementation ofmore » the coupled simulation were introduced. The coupled FFD–Modelica simulation was then evaluated using three examples of room ventilation with complex flow distributions with and without feedback control. Lastly, further research and development needs were also discussed.« less

Coupling indoor airflow, HVAC, control and building envelope heat transfer in the Modelica Buildings library

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zuo, Wangda; Wetter, Michael; Tian, Wei

Here, this paper describes a coupled dynamic simulation of an indoor environment with heating, ventilation, and air conditioning (HVAC) systems, controls and building envelope heat transfer. The coupled simulation can be used for the design and control of ventilation systems with stratified air distributions. Those systems are commonly used to reduce building energy consumption while improving the indoor environment quality. The indoor environment was simulated using the fast fluid dynamics (FFD) simulation programme. The building fabric heat transfer, HVAC and control system were modelled using the Modelica Buildings library. After presenting the concept, the mathematical algorithm and the implementation ofmore » the coupled simulation were introduced. The coupled FFD–Modelica simulation was then evaluated using three examples of room ventilation with complex flow distributions with and without feedback control. Lastly, further research and development needs were also discussed.« less

A Realtime Active Feedback Control System For Coupled Nonlinear Chemical Oscillators

NASA Astrophysics Data System (ADS)

Tompkins, Nathan; Fraden, Seth

2012-02-01

We study the manipulation and control of oscillatory networks. As a model system we use an emulsion of Belousov-Zhabotinsky (BZ) oscillators packed on a hexagonal lattice. Each drop is observed and perturbed by a Programmable Illumination Microscope (PIM). The PIM allows us to track individual BZ oscillators, calculate the phase and order parameters of every drop, and selectively perturb specific drops with photo illumination, all in realtime. To date we have determined the native attractor patterns for drops in 1D arrays and 2D hexagonal packing as a function of coupling strength as well as determined methods to move the system from one attractor basin to another. Current work involves implementing these attractor control methods with our experimental system and future work will likely include implementing a model neural network for use with photo controllable BZ emulsions.

Evaluation of a group based cognitive behavioural therapy programme for menstrual pain management in young women with intellectual disabilities: protocol for a mixed methods controlled clinical trial

PubMed Central

2014-01-01

Background Menstrual pain which is severe enough to impact on daily activities is very common amongst menstruating females. Research suggests that menstrual pain which impacts on daily functioning may be even more prevalent amongst those with intellectual disabilities. Despite this, little research attention has focused on pain management programmes for those with intellectual disabilities. The aims of this pilot study were to develop and evaluate a theory-based cognitive behavioural therapy (CBT) programme for menstrual pain management in young women with intellectual disabilities. Methods/Design The study utilised a mixed methods controlled clinical trial to evaluate elements from a CBT programme called Feeling Better (McGuire & McManus, 2010). The Feeling Better programme is a modular, manualised intervention designed for people with an intellectual disability and their carers. The programme was delivered to 36 young women aged 12 – 30 years who have a Mild - Moderate Intellectual Disability, split between two conditions. The treatment group received the Feeling Better intervention and the control group received treatment as usual. To evaluate the effectiveness of the programme, measures were taken of key pain variables including impact, knowledge, self-efficacy and coping. Process evaluation was conducted to examine which elements of the programme were most successful in promoting change. Discussion Participants in the intervention group were expected to report the use of a greater number of coping strategies and have greater knowledge of pain management strategies following participation in the intervention and at three month follow-up, when compared to control group participants. A significant advantage of the study was the use of mixed methods and inclusion of process evaluation to determine which elements of a cognitive behavioural therapy programme work best for individuals with intellectual disabilities. Trial registration Current Controlled Trials ISRCTN75567759 PMID:25201648

Promoting evidence-based childhood fever management through a peer education programme based on the theory of planned behaviour.

PubMed

Edwards, Helen; Walsh, Anne; Courtney, Mary; Monaghan, Sarah; Wilson, Jenny; Young, Jeanine

2007-10-01

This study examined effectiveness of a theoretically based education programme in reducing inappropriate antipyretic use in fever management. Paediatric nurses' inconsistent, ritualistic antipyretic use in fever management is influenced by many factors including inconsistent beliefs and parental requests. Determinants of antipyretic administration, identified by the theory of planned behaviour, were belief-based attitudes and subjective norms. A quasi-experiment explored group effects of a peer education programme, based on the theory of planned behaviour, on factors influencing paediatric nurses' antipyretic administration. Surveys and chart audits collected data from medical wards at experimental and control hospitals one month pre and one and four months postpeer education programme. All nurses employed in targeted wards were eligible to participate in surveys and all eligible charts were audited. The peer education programme consisted of four one-hour sessions targeting evidence-based knowledge, myths and misconceptions, normative, attitudinal and control influences over and rehearsal of evidence-based fever management. All nurses in experimental hospital targeted wards were eligible to attend. Peer education and support facilitated session information reaching those unable to attend sessions. Two-way univariate anovas explored between subject, experimental and control group and within subject factors, pre, post and latency data. Significant interactions in normative influence (p = 0.01) and intentions (p = 0.01), a significant main group effect in control influence (p = 0.01) and a significant main effect between audit data across time points (p = 0.03) highlight peer education programme effectiveness in behaviour change. Normative, control and intention changes postpeer education programme were maintained in latency data; mean temperature was not. The peer education programme, based on a behaviour change theory, initiated and maintained evidence-based intentions for antipyretics use in fever management. The promotion of evidence-based change in organizational unit intentions and behaviour highlights the crucial role peer support and education can play in continuing educational programmes.

Solid state control system for oil well bailer pump

DOE Office of Scientific and Technical Information (OSTI.GOV)

Senghaas, K. A.; Senghaas, P.

1985-05-14

A solid state switching controller for use with various types of oil well bailer pumps. Individually programmable steps with lockouts provide multiple mutual exclusivity between various circuit operations. A trickle charge battery system powers the control circuits. A tank overflow float protects against oil spillage. An automatic production rate adjustment circuit is provided which increases cycle time in proportion to the rate of production. The circuit includes a low power voltage detector for disabling the control circuits until the line voltage is acceptable. A three-phase power and control system with an isolation transformer for the controls avoids unreliable ground connections.more » The timers include a dividing circuit with an RC circuit. All power actuated apparatus are actuated by triac switches which are controlled by an opto driver. The bailer brake is pulse actuated for allowing the bailer to sink into crude oil without excess cable looseness.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. E. Lawson, R. Marsala, S. Ramakrishnan, X. Zhao, P. Sichta

In order to provide improved and expanded experimental capabilities, the existing Transrex power supplies at PPPL are to be upgraded and modernized. Each of the 39 power supplies consists of two six pulse silicon controlled rectifier sections forming a twelve pulse power supply. The first modification is to split each supply into two independent six pulse supplies by replacing the existing obsolete twelve pulse firing generator with two commercially available six pulse firing generators. The second change replaces the existing control link with a faster system, with greater capacity, which will allow for independent control of all 78 power supplymore » sections. The third change replaces the existing Computer Automated Measurement and Control (CAMAC) based fault detector with an Experimental Physics and Industrial Control System (EPICS) compatible unit, eliminating the obsolete CAMAC modules. Finally the remaining relay logic and interfaces to the "Hardwired Control System" will be replaces with a Programmable Logic Controller (PLC).« less

Rationale, design and baseline data of a mixed methods study examining the clinical impact of a brief transition programme for young people with juvenile idiopathic arthritis: the DON'T RETARD project.

PubMed

Hilderson, Deborah; Westhovens, Rene; Wouters, Carine; Van der Elst, Kristien; Goossens, Eva; Moons, Philip

2013-12-02

To describe (1) the content of a transition programme for young people with juvenile idiopathic arthritis (JIA) designed as a brief intervention, (2) the rationale and design of a mixed-methods study evaluating the clinical impact of this transition programme and (3) to provide baseline data of the intervention group. An 'embedded experimental' design is used for the evaluation of the transition programme. A 'one-group pretest-posttest, with a non-equivalent posttest-only comparison group design' is used to quantitatively evaluate the impact of the transition programme, applying both longitudinal and comparative analyses. Subsequently, experiences of adolescents and their parents who participated in the experimental group will be analysed qualitatively using content analysis. Participants in the intervention are recruited at a tertiary care centre in Belgium. The comparison group participants are recruited from one tertiary and three secondary care centres in Belgium. The intervention group consists of 33 young people (25 females; 8 males) with a median age of 16 years. Main diagnoses are persistent or extended oligoarticular JIA (33%), polyarticular JIA (30%), enthesitis-related JIA (21%) or systemic arthritis (15%). The transition programme comprises eight key components: (1) transition coordinator; (2) providing information and education; (3) availability by telephone; (4) information about and contact with an adult care programme; (5) guidance of parents; (6) meeting with peers; (7) transfer plan; and (8) actual transfer to adult care. The primary outcome is health status, as perceived by the adolescents. Secondary outcomes are health status, as perceived by the parents; medication adherence; illness-related knowledge; quality of life; fatigue; promotion of independence; support of autonomy; behavioural control and psychological control. At baseline, the median score was 69.2 (Q1=60.0;Q3=92.9) on psychosocial health and 68.8 (Q1=56.3; Q3=89.1) on physical health. Rheumatic-specific health scores ranged from 62.5 to 100. We present the rationale and design of a study intended to evaluate a transition programme for adolescents with JIA as a brief intervention.

The control system of the polarized internal target of ANKE at COSY

NASA Astrophysics Data System (ADS)

Kleines, H.; Sarkadi, J.; Zwoll, K.; Engels, R.; Grigoryev, K.; Mikirtychyants, M.; Nekipelov, M.; Rathmann, F.; Seyfarth, H.; Kravtsov, P.; Vasilyev, A.

2006-05-01

The polarized internal target for the ANKE experiment at the Cooler Synchrotron COSY of the Forschungszentrum Jülich utilizes a polarized atomic beam source to feed a storage cell with polarized hydrogen or deuterium atoms. The nuclear polarization is measured with a Lamb-shift polarimeter. For common control of the two systems, industrial equipment was selected providing reliable, long-term support and remote control of the target as well as measurement and optimization of its operating parameters. The interlock system has been implemented on the basis of SIEMENS SIMATIC S7-300 family of programmable logic controllers. In order to unify the interfacing to the control computer, all front-end equipment is connected via the PROFIBUS DP fieldbus. The process control software was implemented using the Windows-based WinCC toolkit from SIEMENS. The variety of components, to be controlled, and the logical structure of the control and interlock system are described. Finally, a number of applications derived from the present development to other, new installations are briefly mentioned.

Implementation of Adaptive Digital Controllers on Programmable Logic Devices

NASA Technical Reports Server (NTRS)

Gwaltney, David A.; King, Kenneth D.; Smith, Keary J.; Monenegro, Justino (Technical Monitor)

2002-01-01

Much has been made of the capabilities of FPGA's (Field Programmable Gate Arrays) in the hardware implementation of fast digital signal processing. Such capability also makes an FPGA a suitable platform for the digital implementation of closed loop controllers. Other researchers have implemented a variety of closed-loop digital controllers on FPGA's. Some of these controllers include the widely used proportional-integral-derivative (PID) controller, state space controllers, neural network and fuzzy logic based controllers. There are myriad advantages to utilizing an FPGA for discrete-time control functions which include the capability for reconfiguration when SRAM-based FPGA's are employed, fast parallel implementation of multiple control loops and implementations that can meet space level radiation tolerance requirements in a compact form-factor. Generally, a software implementation on a DSP (Digital Signal Processor) or microcontroller is used to implement digital controllers. At Marshall Space Flight Center, the Control Electronics Group has been studying adaptive discrete-time control of motor driven actuator systems using digital signal processor (DSP) devices. While small form factor, commercial DSP devices are now available with event capture, data conversion, pulse width modulated (PWM) outputs and communication peripherals, these devices are not currently available in designs and packages which meet space level radiation requirements. In general, very few DSP devices are produced that are designed to meet any level of radiation tolerance or hardness. The goal of this effort is to create a fully digital, flight ready controller design that utilizes an FPGA for implementation of signal conditioning for control feedback signals, generation of commands to the controlled system, and hardware insertion of adaptive control algorithm approaches. An alternative is required for compact implementation of such functionality to withstand the harsh environment encountered on spacecraft. Radiation tolerant FPGA's are a feasible option for reaching this goal.

Implementation of Adaptive Digital Controllers on Programmable Logic Devices

NASA Technical Reports Server (NTRS)

Gwaltney, David A.; King, Kenneth D.; Smith, Keary J.; Montenegro, Justino (Technical Monitor)

2002-01-01

Much has been made of the capabilities of Field Programmable Gate Arrays (FPGA's) in the hardware implementation of fast digital signal processing functions. Such capability also makes an FPGA a suitable platform for the digital implementation of closed loop controllers. Other researchers have implemented a variety of closed-loop digital controllers on FPGA's. Some of these controllers include the widely used Proportional-Integral-Derivative (PID) controller, state space controllers, neural network and fuzzy logic based controllers. There are myriad advantages to utilizing an FPGA for discrete-time control functions which include the capability for reconfiguration when SRAM- based FPGA's are employed, fast parallel implementation of multiple control loops and implementations that can meet space level radiation tolerance requirements in a compact form-factor. Generally, a software implementation on a Digital Signal Processor (DSP) device or microcontroller is used to implement digital controllers. At Marshall Space Flight Center, the Control Electronics Group has been studying adaptive discrete-time control of motor driven actuator systems using DSP devices. While small form factor, commercial DSP devices are now available with event capture, data conversion, Pulse Width Modulated (PWM) outputs and communication peripherals, these devices are not currently available in designs and packages which meet space level radiation requirements. In general, very few DSP devices are produced that are designed to meet any level of radiation tolerance or hardness. An alternative is required for compact implementation of such functionality to withstand the harsh environment encountered on spacemap. The goal of this effort is to create a fully digital, flight ready controller design that utilizes an FPGA for implementation of signal conditioning for control feedback signals, generation of commands to the controlled system, and hardware insertion of adaptive-control algorithm approaches. Radiation tolerant FPGA's are a feasible option for reaching this goal.

GPs' role security and therapeutic commitment in managing alcohol problems: a randomised controlled trial of a tailored improvement programme.

PubMed

Keurhorst, Myrna; van Beurden, Ivonne; Anderson, Peter; Heinen, Maud; Akkermans, Reinier; Wensing, Michel; Laurant, Miranda

2014-04-17

General practitioners with more positive role security and therapeutic commitment towards patients with hazardous or harmful alcohol consumption are more involved and manage more alcohol-related problems than others. In this study we evaluated the effects of our tailored multi-faceted improvement implementation programme on GPs' role security and therapeutic commitment and, in addition, which professional related factors influenced the impact of the implementation programme. In a cluster randomised controlled trial, 124 GPs from 82 Dutch general practices were randomised to either the intervention or control group. The tailored, multi-faceted programme included combined physician, organisation, and patient directed alcohol-specific implementation strategies to increase role security and therapeutic commitment in GPs. The control group was mailed the national guideline and patients received feedback letters. Questionnaires were completed before and 12 months after start of the programme. We performed linear multilevel regression analysis to evaluate effects of the implementation programme. Participating GPs were predominantly male (63%) and had received very low levels of alcohol related education before start of the study (0.4 h). The programme increased therapeutic commitment (p = 0.005; 95%-CI 0.13 - 0.73) but not role security (p = 0.58; 95%-CI -0.31 - 0.54). How important GPs thought it was to improve their care for problematic alcohol consumption, and the GPs' reported proportion of patients asked about alcohol consumption at baseline, contributed to the effect of the programme on therapeutic commitment. A tailored, multi-faceted programme aimed at improving GP management of patients with hazardous and harmful alcohol consumption improved GPs' therapeutic commitment towards patients with alcohol-related problems, but failed to improve GPs' role security. How important GPs thought it was to improve their care for problematic alcohol consumption, and the GPs' reported proportion of patients asked about alcohol consumption at baseline, both increased the impact of the programme on therapeutic commitment. It might be worthwhile to monitor proceeding of role security and therapeutic commitment throughout the year after the implementation programme, to see whether the programme is effective on short term but faded out on the longer term. ClinicalTrials.gov Identifier: NCT00298220.

Implementation of High Speed Distributed Data Acquisition System

NASA Astrophysics Data System (ADS)

Raju, Anju P.; Sekhar, Ambika

2012-09-01

This paper introduces a high speed distributed data acquisition system based on a field programmable gate array (FPGA). The aim is to develop a "distributed" data acquisition interface. The development of instruments such as personal computers and engineering workstations based on "standard" platforms is the motivation behind this effort. Using standard platforms as the controlling unit allows independence in hardware from a particular vendor and hardware platform. The distributed approach also has advantages from a functional point of view: acquisition resources become available to multiple instruments; the acquisition front-end can be physically remote from the rest of the instrument. High speed data acquisition system transmits data faster to a remote computer system through Ethernet interface. The data is acquired through 16 analog input channels. The input data commands are multiplexed and digitized and then the data is stored in 1K buffer for each input channel. The main control unit in this design is the 16 bit processor implemented in the FPGA. This 16 bit processor is used to set up and initialize the data source and the Ethernet controller, as well as control the flow of data from the memory element to the NIC. Using this processor we can initialize and control the different configuration registers in the Ethernet controller in a easy manner. Then these data packets are sending to the remote PC through the Ethernet interface. The main advantages of the using FPGA as standard platform are its flexibility, low power consumption, short design duration, fast time to market, programmability and high density. The main advantages of using Ethernet controller AX88796 over others are its non PCI interface, the presence of embedded SRAM where transmit and reception buffers are located and high-performance SRAM-like interface. The paper introduces the implementation of the distributed data acquisition using FPGA by VHDL. The main advantages of this system are high accuracy, high speed, real time monitoring.

High density, multi-range analog output Versa Module Europa board for control system applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, Kundan, E-mail: kundan@iuac.res.in; Das, Ajit Lal

2014-01-15

A new VMEDAC64, 12-bit 64 channel digital-to-analog converter, a Versa Module Europa (VME) module, features 64 analog voltage outputs with user selectable multiple ranges, has been developed for control system applications at Inter University Accelerator Centre. The FPGA (Field Programmable Gate Array) is the module's core, i.e., it implements the DAC control logic and complexity of VMEbus slave interface logic. The VMEbus slave interface and DAC control logic are completely designed and implemented on a single FPGA chip to achieve high density of 64 channels in a single width VME module and will reduce the module count in the controlmore » system applications, and hence will reduce the power consumption and cost of overall system. One of our early design goals was to develop the VME interface such that it can be easily integrated with the peripheral devices and satisfy the timing specifications of VME standard. The modular design of this module reduces the amount of time required to develop other custom modules for control system. The VME slave interface is written as a single component inside FPGA which will be used as a basic building block for any VMEbus interface project. The module offers multiple output voltage ranges depending upon the requirement. The output voltage range can be reduced or expanded by writing range selection bits in the control register. The module has programmable refresh rate and by default hold capacitors in the sample and hold circuit for each channel are charged periodically every 7.040 ms (i.e., update frequency 284 Hz). Each channel has software controlled output switch which disconnects analog output from the field. The modularity in the firmware design on FPGA makes the debugging very easy. On-board DC/DC converters are incorporated for isolated power supply for the analog section of the board.« less

A Feasibility Study on the Application of the ScriptGenE Framework as an Anomaly Detection System in Industrial Control Systems

DTIC Science & Technology

2015-09-17

network intrusion detection systems NIST National Institute of Standards and Technology p-tree protocol tree PI protocol informatics PLC programmable logic...electrical, water, oil , natural gas, manufacturing, and pharmaceutical industries, to name a few. The differences between SCADA and DCS systems are often... Oil Company, also known as Saudi Aramco, suffered huge data loss that resulted in the disruption of daily operations for nearly two weeks [BTR13]. As it

Medical care of type 2 diabetes in German disease management programmes: a population-based evaluation.

PubMed

Stark, Reneé G; Schunk, Michaela V; Meisinger, Christine; Rathmann, Wolfgang; Leidl, Reiner; Holle, Rolf

2011-05-01

Type 2 diabetes disease management programmes (DDMPs) are offered by German social health insurance to promote healthcare consistent with evidence-based medical guidelines. The aim of this study was to compare healthcare quality and medical endpoints between diabetes management programme participants and patients receiving usual care designated as controls. All patients with type 2 diabetes (age range: 36-81) in a cross-sectional survey of a cohort study, performed by the Cooperative Health Research in the Region of Augsburg, received a self-administered questionnaire regarding their diabetes care. Physical examination and laboratory tests were also performed. The analysis only included patients with social health insurance and whose participation status in a diabetes disease management program was validated by the primary physician (n = 166). Regression analyses, adjusting for age, sex, education, diabetes duration, baseline waist circumference and clustering regarding primary physician were conducted. Evaluation of healthcare processes showed that those in diabetes disease management programmes (n = 89) reported medical examination of eyes and feet and medical advice regarding diet [odds ratio (OR): 2.39] and physical activity (OR: 2.87) more frequently, received anti-diabetic medications (OR: 3.77) and diabetes education more often (OR: 2.66) than controls. Both groups had satisfactory HbA(1c) control but poor low-density lipoprotein cholesterol control. Blood pressure goals (<140/90 mmHg) were achieved more frequently by patients in diabetes disease management programmes (OR: 2.21). German diabetes disease management programmes are associated with improved healthcare processes and blood pressure control. Low-density lipoprotein cholesterol control must be improved for all patients with diabetes. Further research will be required to assess the long-term effects of this diabetes disease management programme. Copyright © 2011 John Wiley & Sons, Ltd.

'The one with the purse makes policy': Power, problem definition, framing and maternal health policies and programmes evolution in national level institutionalised policy making processes in Ghana.

PubMed

Koduah, Augustina; Agyepong, Irene Akua; van Dijk, Han

2016-10-01

This paper seeks to advance our understanding of health policy agenda setting and formulation processes in a lower middle income country, Ghana, by exploring how and why maternal health policies and programmes appeared and evolved on the health sector programme of work agenda between 2002 and 2012. We theorized that the appearance of a policy or programme on the agenda and its fate within the programme of work is predominately influenced by how national level decision makers use their sources of power to define maternal health problems and frame their policy narratives. National level decision makers used their power sources as negotiation tools to frame maternal health issues and design maternal health policies and programmes within the framework of the national health sector programme of work. The power sources identified included legal and structural authority; access to authority by way of political influence; control over and access to resources (mainly financial); access to evidence in the form of health sector performance reviews and demographic health surveys; and knowledge of national plans such as Ghana Poverty Reduction Strategy. Understanding of power sources and their use as negotiation tools in policy development should not be ignored in the pursuit of transformative change and sustained improvement in health systems in low- and middle income countries (LMIC). Copyright © 2016 Elsevier Ltd. All rights reserved.

Practical assessment of the SWMM programme

NASA Astrophysics Data System (ADS)

Hlustik, P.

2017-10-01

The article describes the advantages and disadvantages of the SWMM programme user environment when working with it. The Storm Water Management Model (SWMM) is a programme developed by the U.S. EPA (United States Environmental Protection Agency). The SWMM programme is used worldwide to plan, analyse and design rainfall-runoff, combined and separate sanitary sewage systems and other drainage systems in urban areas [1]. The programme is freely available to download from the U.S. EPA website [2].

Policy Support and Resources Mobilization for the National Schistosomiasis Control Programme in The People's Republic of China.

PubMed

Zhu, H; Yap, P; Utzinger, J; Jia, T-W; Li, S-Z; Huang, X-B; Cai, S-X

2016-01-01

Schistosomiasis remains a public health problem in many developing countries around the world. After the founding of The People's Republic of China, from 1949 till date, all levels of government, from central to local, have been attaching great importance to schistosomiasis control in The People's Republic of China. With considerable policy support and resources mobilization, the national schistosomiasis control programmes have been implemented during the past 65years. Here, we summarize the successful experience of schistosomiasis control during the process. Recommendations for the future management of the Chinese national schistosomiasis elimination programme are put forward after considering the remaining challenges, shortcomings and lessons learnt from 65years of schistosomiasis control drives in The People's Republic of China. They will help to sustain past achievements, foster the attainment of the ultimate goal of schistosomiasis elimination for the country and provide reference for schistosomiasis control programme in other countries. Copyright © 2016 Elsevier Ltd. All rights reserved.

System-Level Biochip for Impedance Sensing and Programmable Manipulation of Bladder Cancer Cells

PubMed Central

Chuang, Cheng-Hsin; Huang, Yao-Wei; Wu, Yao-Tung

2011-01-01

This paper develops a dielectrophoretic (DEP) chip with multi-layer electrodes and a micro-cavity array for programmable manipulations of cells and impedance measurement. The DEP chip consists of an ITO top electrode, flow chamber, middle electrode on an SU-8 surface, micro-cavity arrays of SU-8 and distributed electrodes at the bottom of the micro-cavity. Impedance sensing of single cells could be performed as follows: firstly, cells were trapped in a micro-cavity array by negative DEP force provided by top and middle electrodes; then, the impedance measurement for discrimination of different stage of bladder cancer cells was accomplished by the middle and bottom electrodes. After impedance sensing, the individual releasing of trapped cells was achieved by negative DEP force using the top and bottom electrodes in order to collect the identified cells once more. Both cell manipulations and impedance measurement had been integrated within a system controlled by a PC-based LabVIEW program. In the experiments, two different stages of bladder cancer cell lines (grade III: T24 and grade II: TSGH8301) were utilized for the demonstration of programmable manipulation and impedance sensing; as the results show, the lower-grade bladder cancer cells (TSGH8301) possess higher impedance than the higher-grade ones (T24). In general, the multi-step manipulations of cells can be easily programmed by controlling the electrical signal in our design, which provides an excellent platform technology for lab-on-a-chip (LOC) or a micro-total-analysis-system (Micro TAS). PMID:22346685

Top-down causation by information control: from a philosophical problem to a scientific research programme

PubMed Central

Auletta, G; Ellis, G.F.R; Jaeger, L

2008-01-01

It has been claimed that different types of causes must be considered in biological systems, including top-down as well as same-level and bottom-up causation, thus enabling the top levels to be causally efficacious in their own right. To clarify this issue, the important distinctions between information and signs are introduced here and the concepts of information control and functional equivalence classes in those systems are rigorously defined and used to characterize when top-down causation by feedback control happens, in a way that is testable. The causally significant elements we consider are equivalence classes of lower level processes, realized in biological systems through different operations having the same outcome within the context of information control and networks. PMID:18319208

Description of extended pre-harvest pig Salmonella surveillance-and-control programme and its estimated effect on food safety related to pork.

PubMed

Alban, L; Barfod, K; Petersen, J V; Dahl, J; Ajufo, J C; Sandø, G; Krog, H H; Aabo, S

2010-11-01

Salmonella in pork can be combated during pre- or post-harvest. For large slaughterhouses, post-harvest measures like decontamination might be cost-effective while this is less likely with small-to-medium sized slaughterhouses. In this study, pre-harvest measures might be more relevant. We describe an extended surveillance-and-control programme for Salmonella in finisher pigs, which, to establish equivalence to the Swedish control programme, is intended for implementation on the Danish island, Bornholm. The effect of the programme on food safety was estimated by analysing Salmonella data from pig carcasses originating from herds that would have qualified for the programme during 2006-2008. Food safety was interpreted as prevalence of Salmonella on carcasses as well as the estimated number of human cases of salmonellosis related to pork produced within the programme. Data from the Danish Salmonella programme were obtained from Bornholm. We used a simulation model developed to estimate the number of human cases based on the prevalence of Salmonella on carcass swabs. Herds are only accepted in the programme if they have one or less seropositive sample within the previous 6 months. In this way, the Salmonella load is kept to a minimum. The programme is not yet in operation and pigs that qualify for the programme are currently mixed at slaughter with those that do not qualify. Therefore, we had to assess the impact on the carcass prevalence indirectly. The prevalence of Salmonella in carcass swabs among qualifying herds was 0.46% for the 3 years as a whole, with 2006 as the year with highest prevalence. According to the simulation the expected number of human cases relating to pork produced within the programme was below 10. When the programme is in operation, an extra effect of separating pigs within the programme from those outside is expected to lower the prevalence of Salmonella even further. © 2010 Blackwell Verlag GmbH.

Key Programme Science lessons from an HIV prevention 'Learning Site' for sex workers in Mombasa, Kenya.

PubMed

McClarty, Leigh M; Bhattacharjee, Parinita; Isac, Shajy; Emmanuel, Faran; Kioko, Japheth; Njiraini, Margaret; Gichangi, Peter; Okoth, Clifford Duncan; Musimbi-Mbole, Janet; Blanchard, James F; Moses, Stephen; Muysyoki, Helgar; Becker, Marissa L

2017-12-14

In 2013, Kenya's National AIDS and STI Control Programme established a Learning Site (LS) in Mombasa County to support and strengthen capacity for HIV prevention programming within organisations working with sex workers. A defining feature of LS was the use of a Programme Science approach throughout its development and implementation. We provide an overview of the key components of LS, present findings from 23 months of programme monitoring data, and highlight key Programme Science lessons from its implementation and monitoring. Routine monitoring data collected from September 2013 through July 2015 are presented. Individual-level service utilisation data were collected monthly and indicators of interest were analysed over time to illustrate trends in enrolment, programme coverage and service utilisation among sex workers in Mombasa County. Over the monitoring period, outreach programme enrolment occurred rapidly; condom distribution targets were met consistently; rates of STI screening remained high and diagnoses declined; and reporting of and response to violent incidents increased. At the same time, enrolment in LS clinics was relatively low among female sex workers, and HIV testing at LS was low among both female and male sex workers. Lessons learnt from operationalising the Programme Science framework through the Mombasa LS can inform the development and implementation of similar LS in different geographical and epidemiological contexts. Importantly, meaningful involvement of sex workers in the design, implementation and monitoring processes ensures that overall programme performance is optimised in the context of local, 'on-the-ground' realities. Additionally, learnings from LS highlight the importance of introducing enhanced monitoring and evaluations systems into complex programmes to better understand and explain programme dynamics over time. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Dexterous programmable robot and control system

NASA Astrophysics Data System (ADS)

Engler, Charles D., Jr.

1995-09-01

An anatomically correct, humanlike, mechanical arm and hand is provided that an operator can control to perform with the dexterity and compliance of a human hand. Being humanlike and robotic enhances the device's control and gripper dexterity. Control of the movement of the arm and hand is performed or guided by a 'teach glove' worn by the operator. As he or she performs some hand manipulation, a controller stores signals from sensors on the exoskeleton. The sensors monitor the operator's finger-joint movement positions. These values are later translated into actuator control signals for servomotors, eventually duplicating the operator's movement.

"CAN Stop" - Implementation and evaluation of a secondary group prevention for adolescent and young adult cannabis users in various contexts - study protocol

PubMed Central

2011-01-01

Background Current research shows that overall numbers for cannabis use among adolescents and young adults dropped in recent years. However, this trend is much less pronounced in continuous cannabis use. With regard to the heightened risk for detrimental health- and development-related outcomes, adolescents and young adults with continuous cannabis use need special attention. The health services structure for adolescents and young adults with substance related problems in Germany, is multifaceted, because different communal, medical and judicial agencies are involved. This results in a rather decentralized organizational structure of the help system. This and further system-inherent characteristics make the threshold for young cannabis users rather high. Because of this, there is a need to establish evidence-based low-threshold help options for young cannabis users, which can be easily disseminated. Therefore, a training programme for young cannabis users (age 14-21) was developed in the "CAN Stop" project. Within the project, we seek to implement and evaluate the training programme within different institutions of the help system. The evaluation is sensitive to the different help systems and their specific prerequisites. Moreover, within this study, we also test the practicability of a training provision through laypersons. Methods/Design The CAN Stop study is a four-armed randomized wait-list controlled trial. The four arms are needed for the different help system settings, in which the CAN Stop training programme is evaluated: (a) the drug addiction aid and youth welfare system, (b) the out-patient medical system, (c) the in-patient medical system and (d) prisons for juvenile offenders. Data are collected at three points, before and after the training or a treatment as usual, and six months after the end of either intervention. Discussion The CAN Stop study is expected to provide an evidence-based programme for young cannabis users seeking to reduce or quit their cannabis use. Moreover, we seek to gain knowledge about the programme's utility within different settings of the German help system for young cannabis users and information about the settings' specific clientele. The study protocol is discussed with regard to potential difficulties within the different settings. Trial registration ISRCTN: ISRCTN57036983 PMID:21501479

Lost in translation? Theory, policy and practice in systems-based environmental approaches to obesity prevention in the Healthy Towns programme in England.

PubMed

Sautkina, Elena; Goodwin, Denise; Jones, Andy; Ogilvie, David; Petticrew, Mark; White, Martin; Cummins, Steven

2014-09-01

This paper explores how system-wide approaches to obesity prevention were 'theorised' and translated into practice in the 'Healthy Towns' programme implemented in nine areas in England. Semi-structured interviews with 20 informants, purposively selected to represent national and local programme development, management and delivery were undertaken. Results suggest that informants articulated a theoretical understanding of a system-wide approach to obesity prevention, but simplifying this complex task in the context of uncertainty over programme aims and objectives, and absence of a clear direction from the central government, resulted in local programmes relying on traditional multi-component approaches to programme delivery. The development of clear, practical guidance on implementation should form a central part of future system-wide approaches to obesity prevention. Copyright © 2014 Elsevier Ltd. All rights reserved.

Testing a Dutch web-based tailored lifestyle programme among adults: a study protocol.

PubMed

Schulz, Daniela N; Kremers, Stef Pj; van Osch, Liesbeth Adm; Schneider, Francine; van Adrichem, Mathieu Jg; de Vries, Hein

2011-02-16

Smoking, high alcohol consumption, unhealthy eating habits and physical inactivity often lead to (chronic) diseases, such as cardiovascular diseases and cancer. Tailored online interventions have been proven to be effective in changing health behaviours. The aim of this study is to test and compare the effectiveness of two different tailoring strategies for changing lifestyle compared to a control group using a multiple health behaviour web-based approach. In our Internet-based tailored programme, the five lifestyle behaviours of smoking, alcohol intake, fruit consumption, vegetable consumption, and physical activity are addressed. This randomized controlled trial, conducted among Dutch adults, includes two experimental groups (i.e., a sequential behaviour tailoring condition and a simultaneous behaviour tailoring condition) and a control group. People in the sequential behaviour tailoring condition obtain feedback on whether their lifestyle behaviours meet the Dutch recommendations. Using a step-by-step approach, they are stimulated to continue with a computer tailored module to change only one unhealthy behaviour first. In the course of the study, they can proceed to change a second behaviour. People in the simultaneous behaviour tailoring condition receive computer tailored feedback about all their unhealthy behaviours during their first visit as a stimulation to change all unhealthy behaviours. The experimental groups can re-visit the website and can then receive ipsative feedback (i.e., current scores are compared to previous scores in order to give feedback about potential changes). The (difference in) effectiveness of the different versions of the programme will be tested and compared to a control group, in which respondents only receive a short health risk appraisal. Programme evaluations will assess satisfaction with and appreciation and personal relevance of the intervention among the respondents. Finally, potential subgroup differences pertaining to gender, age and socioeconomic status regarding the behaviour effects and programme evaluation will be assessed. Research regarding multiple behaviour change is in its infancy. We study how to offer multiple behaviour change interventions optimally. Using these results could strengthen the effectiveness of web-based computer-tailoring lifestyle programmes. This study will yield new results about the need for differential lifestyle approaches using Internet-based expert systems and potential differences in subgroups concerning the effectiveness and appreciation. Dutch Trial Register NTR2168.

Flow pumping system for physiological waveforms.

PubMed

Tsai, William; Savaş, Omer

2010-02-01

A pulsatile flow pumping system is developed to replicate flow waveforms with reasonable accuracy for experiments simulating physiological blood flows at numerous points in the body. The system divides the task of flow waveform generation between two pumps: a gear pump generates the mean component and a piston pump generates the oscillatory component. The system is driven by two programmable servo controllers. The frequency response of the system is used to characterize its operation. The system has been successfully tested in vascular flow experiments where sinusoidal, carotid, and coronary flow waveforms are replicated.

The efficacy of early language intervention in mainstream school settings: a randomized controlled trial.

PubMed

Fricke, Silke; Burgoyne, Kelly; Bowyer-Crane, Claudine; Kyriacou, Maria; Zosimidou, Alexandra; Maxwell, Liam; Lervåg, Arne; Snowling, Margaret J; Hulme, Charles

2017-10-01

Oral language skills are a critical foundation for literacy and more generally for educational success. The current study shows that oral language skills can be improved by providing suitable additional help to children with language difficulties in the early stages of formal education. We conducted a randomized controlled trial with 394 children in England, comparing a 30-week oral language intervention programme starting in nursery (N = 132) with a 20-week version of the same programme starting in Reception (N = 133). The intervention groups were compared to an untreated waiting control group (N = 129). The programmes were delivered by trained teaching assistants (TAs) working in the children's schools/nurseries. All testers were blind to group allocation. Both the 20- and 30-week programmes produced improvements on primary outcome measures of oral language skill compared to the untreated control group. Effect sizes were small to moderate (20-week programme: d = .21; 30-week programme: d = .30) immediately following the intervention and were maintained at follow-up 6 months later. The difference in improvement between the 20-week and 30-week programmes was not statistically significant. Neither programme produced statistically significant improvements in children's early word reading or reading comprehension skills (secondary outcome measures). This study provides further evidence that oral language interventions can be delivered successfully by trained TAs to children with oral language difficulties in nursery and Reception classes. The methods evaluated have potentially important policy implications for early education. © 2017 Association for Child and Adolescent Mental Health.

Healthier food choices as a result of the revised healthy diet programme Krachtvoer for students of prevocational schools.

PubMed

Bessems, Kathelijne M H H; van Assema, Patricia; Martens, Marloes K; Paulussen, Theo G W M; Raaijmakers, Lieke G M; de Rooij, Mark; de Vries, Nanne K

2012-05-24

Krachtvoer is a Dutch healthy diet programme for prevocational schools, developed in 2001 and revised for a broader target group in 2007, based on the findings of an evaluation of the first version. The goal of this study was to report on the short- and longer-term total and subgroup effects of the revised programme on students' fruit, fruit juice, breakfast, and snack consumption. Schools were randomized to the experimental condition, teaching the Krachtvoer programme, or to the control condition teaching the regular nutrition lessons. Self-reported consumption of fruit, fruit juice, breakfast and snacks was measured at baseline directly before programme implementation, one to four weeks after finishing programme implementation, and after six months. Mixed linear and logistic regression analyses were conducted. In total 1117 students of 13 experimental schools and 758 students of 11 control schools participated in the study. Short- and longer-term favourable intervention effects were found on fruit consumption (mean difference between experimental and control group 0.15 servings at both posttests). Regarding fruit juice consumption, only short-term favourable effects were revealed (mean difference between experimental and control group 0.05 glasses). Intervention effects on breakfast intakes were limited. No changes in snack frequency were reported, but students made healthier snack choices as a result of the programme. Some favourable as well as unfavourable effects occurred in subgroups of students. The effects on fruit consumption and snack choices justify the current nationwide dissemination of the programme. Achieving changes in breakfast consumption may, however, require other strategies.

Effectiveness of balance training programme in reducing the frequency of falling in established osteoporotic women: a randomized controlled trial.

PubMed

Mikó, Ibolya; Szerb, Imre; Szerb, Anna; Poor, Gyula

2017-02-01

To investigate the effect of a 12-month sensomotor balance exercise programme on postural control and the frequency of falling in women with established osteoporosis. Randomized controlled trial where the intervention group was assigned the 12-month Balance Training Programme and the control group did not undertake any intervention beyond regular osteoporosis treatment. A total of 100 osteoporotic women - at least with one osteoporotic fracture - aged 65 years old and above. Balance was assessed in static and dynamic posture both with performance-based measures of balance, such as the Berg Balance Scale and the Timed Up and Go Test, and with a stabilometric computerized platform. Patients in the intervention group completed the 12-month sensomotor Balance Training Programme in an outpatient setting, guided by physical therapists, three times a week, for 30 minutes. The Berg Balance Scale and the Timed Up and Go Test showed a statistically significant improvement of balance in the intervention group ( p = 0.001 and p = 0.005, respectively). Balance tests using the stabilometer also showed a statistically significant improvement in static and dynamic postural balance for osteoporotic women after the completion of the Balance Training Programme. As a consequence, the one-year exercise programme significantly decreased the number of falls in the exercise group compared with the control group. The Balance Training Programme significantly improved the balance parameters and reduced the number of falls in postmenopausal women who have already had at least one fracture in the past.

The preventive effect of the bounding exercise programme on hamstring injuries in amateur soccer players: the design of a randomized controlled trial.

PubMed

Van de Hoef, S; Huisstede, B M A; Brink, M S; de Vries, N; Goedhart, E A; Backx, F J G

2017-08-22

Hamstring injuries are the most common muscle injury in amateur and professional soccer. Most hamstring injuries occur in the late swing phase, when the hamstring undergoes a stretch-shortening cycle and the hamstring does a significant amount of eccentric work. The incidence of these injuries has not decreased despite there being effective injury prevention programmes focusing on improving eccentric hamstring strength. As this might be because of poor compliance, a more functional injury prevention exercise programme that focuses on the stretch-shortening cycle might facilitate compliance. In this study, a bounding exercise programme consisting of functional plyometric exercises is being evaluated. A cluster-randomized controlled trial (RCT). Male amateur soccer teams (players aged 18-45 years) have been randomly allocated to intervention and control groups. Both groups are continuing regular soccer training and the intervention group is additionally performing a 12-week bounding exercise programme (BEP), consisting of a gradual build up and maintenance programme for the entire soccer season. The primary outcome is hamstring injury incidence. Secondary outcome is compliance with the BEP during the soccer season and 3 months thereafter. Despite effective hamstring injury prevention programmes, the incidence of these injuries remains high in soccer. As poor compliance with these programmes may be an issue, a new plyometric exercise programme may encourage long-term compliance and is expected to enhance sprinting and jumping performance besides preventing hamstring injuries. NTR6129 . Retrospectively registered on 1 November 2016.

Home exercise programmes supported by video and automated reminders compared with standard paper-based home exercise programmes in patients with stroke: a randomized controlled trial.

PubMed

Emmerson, Kellie B; Harding, Katherine E; Taylor, Nicholas F

2017-08-01

To determine whether patients with stroke receiving rehabilitation for upper limb deficits using smart technology (video and reminder functions) demonstrate greater adherence to prescribed home exercise programmes and better functional outcomes when compared with traditional paper-based exercise prescription. Randomized controlled trial comparing upper limb home exercise programmes supported by video and automated reminders on smart technology, with standard paper-based home exercise programmes. A community rehabilitation programme within a large metropolitan health service. Patients with stroke with upper limb deficits, referred for outpatient rehabilitation. Participants were randomly assigned to the control (paper-based home exercise programme) or intervention group (home exercise programme filmed on an electronic tablet, with an automated reminder). Both groups completed their prescribed home exercise programme for four weeks. The primary outcome was adherence using a self-reported log book. Secondary outcomes were change in upper limb function and patient satisfaction. A total of 62 participants were allocated to the intervention ( n = 30) and control groups ( n = 32). There were no differences between the groups for measures of adherence (mean difference 2%, 95% CI -12 to 17) or change in the Wolf Motor Function Test log transformed time (mean difference 0.02 seconds, 95% CI -0.1 to 0.1). There were no between-group differences in how participants found instructions ( p = 0.452), whether they remembered to do their exercises ( p = 0.485), or whether they enjoyed doing their exercises ( p = 0.864). The use of smart technology was not superior to standard paper-based home exercise programmes for patients recovering from stroke. This trial design was registered prospectively with the Australian and New Zealand Clinical Trials Register, ID: ACTRN 12613000786796. http://www.anzctr.org.au/trialSearch.aspx.

ECLIPS: An extended CLIPS for backward chaining and goal-directed reasoning

NASA Technical Reports Server (NTRS)

Homeier, Peter V.; Le, Thach C.

1991-01-01

Realistic production systems require an integrated combination of forward and backward reasoning to reflect appropriately the processes of natural human expert reasoning. A control mechanism that consists solely of forward reasoning is not an effective way to promptly focus the system's attention as calculation proceeds. Often, expert system programmers will attempt to compensate for this lack by using data to enforce the desired goal directed control structure. This approach is inherently flawed in that it is attempting to use data to fulfill the role of control. This paper will describe our implementation of backward chaining in C Language Integrated Production System (CLIPS), and show how this has shortened and simplified various CLIPS programs. This work was done at the Aerospace Corporation, and has general applicability.

GCS programmer's manual

NASA Technical Reports Server (NTRS)

Lowman, Douglas S.; Withers, B. Edward; Shagnea, Anita M.; Dent, Leslie A.; Hayhurst, Kelly J.

1990-01-01

A variety of instructions to be used in the development of implementations of software for the Guidance and Control Software (GCS) project is described. This document fulfills the Radio Technical Commission for Aeronautics RTCA/DO-178A guidelines, 'Software Considerations in Airborne Systems and Equipment Certification' requirements for document No. 4, which specifies the information necessary for understanding and programming the host computer, and document No. 12, which specifies the software design and implementation standards that are applicable to the software development and testing process. Information on the following subjects is contained: activity recording, communication protocol, coding standards, change management, error handling, design standards, problem reporting, module testing logs, documentation formats, accuracy requirements, and programmer responsibilities.

What's new in graduate medical education?

PubMed

Hernandez, Raquel G

2016-12-01

The development of new graduate medical education programmes provides both opportunities and challenges. Efforts to address physician workforce shortages as well as a realisation that curricula need to be updated to adjust to our rapidly changing healthcare environment have resulted in more educators considering the "how to" and "what's new" of programme development. Understanding the Next Accreditation System, an accreditation system introduced by the Accreditation Council of Graduate Medical Education in 2012, is critical to the success of new as well as existing residency and fellowship programmes. Although many educators are aware of the general rational for the Next Accreditation System, an in-depth understanding of the meaning of Next Accreditation System is necessary from an experiential and theoretical perspective to be able to successfully launch new programmes and moves towards accreditation. A new paediatric categorical residency programme and a new paediatric surgical programme were developed at our institution immediately following the implementation of Next Accreditation System. We provide a series of insights and perspectives based on our experience relative to what priorities we saw outlined from both the programmatic and the institutional perspective to have our graduate medical education programmes reviewed for accreditation. During this discussion, the following objectives are outlined: to overview the Next Accreditation System as a framework and priorities, to discuss the opportunities and challenges that may exist in developing new programmes, and to discuss future directions in the evaluation of trainees and assessment of training competency. Although challenges are outlined, we hope to relay the continued excitement and opportunities that exist relative to enhancing training curricula for future graduate medical education programme builders.

Towards an Analytical Framework for Understanding the Development of a Quality Assurance System in an International Joint Programme

ERIC Educational Resources Information Center

Zheng, Gaoming; Cai, Yuzhuo; Ma, Shaozhuang

2017-01-01

This paper intends to construct an analytical framework for understanding quality assurance in international joint programmes and to test it in a case analysis of a European--Chinese joint doctoral degree programme. The development of a quality assurance system for an international joint programme is understood as an institutionalization process…

The Establishment and Function of Schistosomiasis Surveillance System Towards Elimination in The People's Republic of China.

PubMed

Zhang, L-J; Li, S-Z; Wen, L-Y; Lin, D-D; Abe, E M; Zhu, R; Du, Y; Lv, S; Xu, J; Webster, B L; Rollinson, D; Zhou, X-N

2016-01-01

Schistosoma japonicum is the main schistosome species in The People's Republic of China, causing intestinal schistosomiasis, a debilitating disease of public health importance. The People's Republic of China used to be heavily endemic with schistosomiasis, but great progress has been made through the vigorous efforts of the national control programmes in the last six decades. Presently, efforts are geared towards eliminating schistosomiasis from The People's Republic of China by the end of 2025 through effective schistosomiasis surveillance, an important component in the drive towards schistosomiasis elimination. Therefore, this article explicitly outlines the development and progress made in schistosomiasis surveillance since 1990 with a special focus on the new surveillance system in use. Although the surveillance system has steadily improved over the years, it is faced with many challenges. Hence, more efforts are needed to establish an effective and sensitive evaluation system for the national schistosomiasis elimination programme in The People's Republic of China. Copyright © 2016 Elsevier Ltd. All rights reserved.

NATO initial common operational picture capability project

NASA Astrophysics Data System (ADS)

Fanti, Laura; Beach, David

2002-08-01

The Common Operational Picture (COP) capability can be defined as the ability to display on a single screen integrated views of the Recognized Maritime, Air and Ground Pictures, enriched by other tactical data, such as theater plans, assets, intelligence and logistics information. The purpose of the COP capability is to provide military forces a comprehensive view of the battle space, thereby enhancing situational awareness and the decision-making process across the military command and control spectrum. The availability of a COP capability throughout the command structure is a high priority operational requirement in NATO. A COP capability for NATO is being procured and implemented in an incremental way within the NATO Automated Information System (Bi-SC AIS) Functional Services programme under the coordination of the NATO Consultation, Command and Control Agency (NC3A) Integrated Programme Team 5 (IPT5). The NATO Initial COP (iCOP) capability project, first step of this evolutionary procurement, will provide an initial COP capability to NATO in a highly pragmatic and low-risk fashion, by using existing operational communications infrastructure and NATO systems, i.e. the NATO-Wide Integrated Command and Control Software for Air Operations (ICC), the Maritime Command and Control Information System (MCCIS), and the Joint Operations and Intelligence Information System (JOIIS), which will provide respectively the Recognized Air, Maritime and Ground Pictures. This paper gives an overview of the NATO Initial COP capability project, including its evolutionary implementation approach, and describes the technical solution selected to satisfy the urgent operational requirement in a timely and cost effective manner.

The Information System at CeSAM

NASA Astrophysics Data System (ADS)

Agneray, F.; Gimenez, S.; Moreau, C.; Roehlly, Y.

2012-09-01

Modern large observational programmes produce important amounts of data from various origins, and need high level quality control, fast data access via easy-to-use graphic interfaces, as well as possibility to cross-correlate informations coming from different observations. The Centre de donnéeS Astrophysique de Marseille (CeSAM) offer web access to VO compliant Information Systems to access data of different projects (VVDS, HeDAM, EXODAT, HST-COSMOS,…), including ancillary data obtained outside Laboratoire d'Astrophysique de Marseille (LAM) control. The CeSAM Information Systems provides download of catalogues and some additional services like: search, extract and display imaging and spectroscopic data by multi-criteria and Cone Search interfaces.

General purpose rocket furnace

NASA Technical Reports Server (NTRS)

Aldrich, B. R.; Whitt, W. D. (Inventor)

1979-01-01

A multipurpose furnace for space vehicles used for material processing experiments in an outer space environment is described. The furnace contains three separate cavities designed to process samples of the widest possible range of materials and thermal requirements. Each cavity contains three heating elements capable of independent function under the direction of an automatic and programmable control system. A heat removable mechanism is also provided for each cavity which operates in conjunction with the control system for establishing an isothermally heated cavity or a wide range of thermal gradients and cool down rates. A monitoring system compatible with the rocket telemetry provides furnace performance and sample growth rate data throughout the processing cycle.

Firmware Development Improves System Efficiency

NASA Technical Reports Server (NTRS)

Chern, E. James; Butler, David W.

1993-01-01

Most manufacturing processes require physical pointwise positioning of the components or tools from one location to another. Typical mechanical systems utilize either stop-and-go or fixed feed-rate procession to accomplish the task. The first approach achieves positional accuracy but prolongs overall time and increases wear on the mechanical system. The second approach sustains the throughput but compromises positional accuracy. A computer firmware approach has been developed to optimize this point wise mechanism by utilizing programmable interrupt controls to synchronize engineering processes 'on the fly'. This principle has been implemented in an eddy current imaging system to demonstrate the improvement. Software programs were developed that enable a mechanical controller card to transmit interrupts to a system controller as a trigger signal to initiate an eddy current data acquisition routine. The advantages are: (1) optimized manufacturing processes, (2) increased throughput of the system, (3) improved positional accuracy, and (4) reduced wear and tear on the mechanical system.

Cluster randomised controlled trial of 'whole school' child maltreatment prevention programme in primary schools in Northern Ireland: study protocol for Keeping Safe.

PubMed

McElearney, Aisling; Brennan-Wilson, Aoibheann; Murphy, Christina; Stephenson, Phyllis; Bunting, Brendan

2018-05-03

Child maltreatment has a pervasive, detrimental impact on children's wellbeing. Despite a growing focus on prevention through school based education, few programmes adopt a whole- school approach, are multi-component, seek to address all forms of maltreatment, or indeed have been robustly evaluated. This paper describes a cluster randomised controlled trial designed to evaluate a school based child maltreatment prevention programme: 'Keeping Safe' in primary schools in Northern Ireland. The intervention has been designed by a non-profit agency. Programme resources include 63 lessons taught incrementally to children between four and 11 years old, and is premised on three core themes: healthy relationships, my body, and being safe. There are programme resources to engage parents and to build the capacity and skills of school staff. A cluster Randomised Controlled Trial (RCT) will be conducted with children in 80 schools over a two-year period. The unit of randomisation is the school. Schools will be allocated to intervention or wait-list control groups using a computer-generated list. Data will be collected at three time points: baseline, end of year one, and end of year two of programme implementation. Primary outcomes will include: children's understanding of key programme concepts, self-efficacy to keep safe in situations of maltreatment, anxiety arising from programme participation, and disclosure of maltreatment. Secondary outcomes include teachers' comfort and confidence in teaching the programme and parents' confidence in talking to their children about programme concepts. This RCT will address gaps in current practice and evidence regarding school based child maltreatment prevention programmes. This includes the use of a whole- school approach and multi-component programme that addresses all maltreatment concepts, a two-year period of programme implementation, and the tracking of outcomes for children, parents, and teachers. Methodologically, it will extend our understanding and learning in: capturing sensitive outcome data from young children, adapting and using standardised measures with children of different ages, the use of school level administrative data on staff reports/children's disclosure of maltreatment as behavioural outcomes, and the conduct of complex trials within the busy school environment. ClinicalTrials.gov: NCT02961010 (Retrospectively registered 8 November 2016).

Integrated High-Speed Torque Control System for a Robotic Joint

NASA Technical Reports Server (NTRS)

Davis, Donald R. (Inventor); Radford, Nicolaus A. (Inventor); Permenter, Frank Noble (Inventor); Valvo, Michael C. (Inventor); Askew, R. Scott (Inventor)

2013-01-01

A control system for achieving high-speed torque for a joint of a robot includes a printed circuit board assembly (PCBA) having a collocated joint processor and high-speed communication bus. The PCBA may also include a power inverter module (PIM) and local sensor conditioning electronics (SCE) for processing sensor data from one or more motor position sensors. Torque control of a motor of the joint is provided via the PCBA as a high-speed torque loop. Each joint processor may be embedded within or collocated with the robotic joint being controlled. Collocation of the joint processor, PIM, and high-speed bus may increase noise immunity of the control system, and the localized processing of sensor data from the joint motor at the joint level may minimize bus cabling to and from each control node. The joint processor may include a field programmable gate array (FPGA).

Automated turn pike using PLC and SCADA

NASA Astrophysics Data System (ADS)

Silpa Sreedhar, P.; Aiswarya, P.; Kathirvelan, J.

2017-11-01

We propose a smart turnpike based on Programmable Logic Controller (PLC) and Supervisory Control and Data Acquisition Systems (SCADA) in this paper. In this work, the basic idea is to measure the weight of the vehicles and classify them according to its weight to the respective lanes. It is difficult for the turnpike people to monitor the whole process all the time. So, this PLC based diversion system can be implemented in turnpikes to reduce the difficulties. This method will work based on weight sensors (piezo-resistive) whose output will be fed to a PLC, which will control the vehicle diversion. Using SCADA software, the whole process can be monitored from a remote area. The algorithm developed in this successfully installed in real time system.

Design of a wideband CMOS impedance spectroscopy ASIC analog front-end for multichannel biosensor interfaces.

PubMed

Valente, Virgilio; Dai Jiang; Demosthenous, Andreas

2015-08-01

This paper presents the preliminary design and simulation of a flexible and programmable analog front-end (AFE) circuit with current and voltage readout capabilities for electric impedance spectroscopy (EIS). The AFE is part of a fully integrated multifrequency EIS platform. The current readout comprises of a transimpedance stage and an automatic gain control (AGC) unit designed to accommodate impedance changes larger than 3 order of magnitude. The AGC is based on a dynamic peak detector that tracks changes in the input current over time and regulates the gain of a programmable gain amplifier in order to optimise the signal-to-noise ratio. The system works up to 1 MHz. The voltage readout consists of a 2 stages of fully differential current-feedback instrumentation amplifier which provide 100 dB of CMRR and a programmable gain up to 20 V/V per stage with a bandwidth in excess of 10MHz.

Planning fuel-conservative descents in an airline environmental using a small programmable calculator: Algorithm development and flight test results

NASA Technical Reports Server (NTRS)

Knox, C. E.; Vicroy, D. D.; Simmon, D. A.

1985-01-01

A simple, airborne, flight-management descent algorithm was developed and programmed into a small programmable calculator. The algorithm may be operated in either a time mode or speed mode. The time mode was designed to aid the pilot in planning and executing a fuel-conservative descent to arrive at a metering fix at a time designated by the air traffic control system. The speed model was designed for planning fuel-conservative descents when time is not a consideration. The descent path for both modes was calculated for a constant with considerations given for the descent Mach/airspeed schedule, gross weight, wind, wind gradient, and nonstandard temperature effects. Flight tests, using the algorithm on the programmable calculator, showed that the open-loop guidance could be useful to airline flight crews for planning and executing fuel-conservative descents.

Planning fuel-conservative descents in an airline environmental using a small programmable calculator: algorithm development and flight test results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knox, C.E.; Vicroy, D.D.; Simmon, D.A.

A simple, airborne, flight-management descent algorithm was developed and programmed into a small programmable calculator. The algorithm may be operated in either a time mode or speed mode. The time mode was designed to aid the pilot in planning and executing a fuel-conservative descent to arrive at a metering fix at a time designated by the air traffic control system. The speed model was designed for planning fuel-conservative descents when time is not a consideration. The descent path for both modes was calculated for a constant with considerations given for the descent Mach/airspeed schedule, gross weight, wind, wind gradient, andmore » nonstandard temperature effects. Flight tests, using the algorithm on the programmable calculator, showed that the open-loop guidance could be useful to airline flight crews for planning and executing fuel-conservative descents.« less

The effectiveness of an outdoor adventure programme for young children with autism spectrum disorder: a controlled study.

PubMed

Zachor, Ditza A; Vardi, Shira; Baron-Eitan, Shani; Brodai-Meir, Inbal; Ginossar, Noa; Ben-Itzchak, Esther

2017-05-01

Outdoor adventure programmes aim to improve interpersonal relationships using adventurous activities. The current study examined the effectiveness of an outdoor adventure programme in children with autism spectrum disorders (ASD). The study included 51 participants (40 males, 11 females; age 3y 4mo-7y 4mo) enrolled in ASD special education kindergartens. Only the intervention group (n=30) participated in the outdoor adventure programme for 13 weeks, completing challenging physical activities that required cooperation and communication with peers and instructors. The control group (n=21) was not significantly different from the research group in age, sex, cognitive, and adaptive behaviour measures. Outcomes after the intervention revealed significant improvement in social-communication and different directions in the two groups in the social cognition, social motivation, and autistic mannerisms subdomains of the Social Responsiveness Scale. While the group that received an outdoor adventure programme showed a tendency toward a reduction in severity, the control group showed the opposite (p<0.010). The outdoor adventure programme required problem-solving skills and forced the child to communicate in exciting situations. This study suggests that an outdoor adventure programme may be an effective intervention in addition to traditional treatments in young children with ASD. Future studies should examine the outcome of outdoor adventure programmes delivered for longer periods of time and maintenance of the achievements over time. © 2016 Mac Keith Press.

Evaluation of mentorship programme in nursing education: a pilot study in Turkey.

PubMed

Bulut, Hülya; Hisar, Filiz; Demir, Sevil Güler

2010-11-01

Mentorships increase the students' confidence, help ease the difficulties associated with their new environment and reality, increase self-esteem and help socialize students into the nursing role. The main objective of the programme was to support mentee students in facilitating their transition to the university and nursing. This descriptive, exploratory study was designed using Maslow's hierarchy of needs and a pre/post test Rotter's locus of control. Sixty-two (62) first-year students and fifty-eight (58) fourth-year students were eligible to be in the mentoring programme. Mentors and mentees contacted each other weekly as required to provide information and support. Nursing lecturers were available to support the mentors for regular contact over the 13 weeks of the programme. The data were collected by questionnaire for the first-year and fourth-year students. In addition, in order to determine the efficacy of the mentoring programme, Rotter's Locus of Control Scale was administered to first-year students both at the beginning and the end of the study. The majority of first-year students stated that they benefited from the programme. It was established that the mentoring programme influenced the locus of control positively. The mentoring programme may be used to improve the adaptation of nursing students to both the university and nursing profession. Copyright © 2010 Elsevier Ltd. All rights reserved.

A comparison of the effectiveness of three parenting programmes in improving parenting skills, parent mental-well being and children's behaviour when implemented on a large scale in community settings in 18 English local authorities: the parenting early intervention pathfinder (PEIP).

PubMed

Lindsay, Geoff; Strand, Steve; Davis, Hilton

2011-12-30

There is growing evidence that parenting programmes can improve parenting skills and thereby the behaviour of children exhibiting or at risk of developing antisocial behaviour. Given the high prevalence of childhood behaviour problems the task is to develop large scale application of effective programmes. The aim of this study was to evaluate the UK government funded implementation of the Parenting Early Intervention Pathfinder (PEIP). This involved the large scale rolling out of three programmes to parents of children 8-13 years in 18 local authorities (LAs) over a 2 year period. The UK government's Department for Education allocated each programme (Incredible Years, Triple P and Strengthening Families Strengthening Communities) to six LAs which then developed systems to intervene using parenting groups. Implementation fidelity was supported by the training of group facilitators by staff of the appropriate parenting programme supplemented by supervision. Parents completed measures of parenting style, efficacy, satisfaction, and mental well-being, and also child behaviour. A total of 1121 parents completed pre- and post-course measures. There were significant improvements on all measures for each programme; effect sizes (Cohen's d) ranged across the programmes from 0.57 to 0.93 for parenting style; 0.33 to 0.77 for parenting satisfaction and self-efficacy; and from 0.49 to 0.88 for parental mental well-being. Effectiveness varied between programmes: Strengthening Families Strengthening Communities was significantly less effective than both the other two programmes in improving parental efficacy, satisfaction and mental well-being. Improvements in child behaviour were found for all programmes: effect sizes for reduction in conduct problems ranged from -0.44 to -0.71 across programmes, with Strengthening Families Strengthening Communities again having significantly lower reductions than Incredible Years. Evidence-based parenting programmes can be implemented successfully on a large scale in community settings despite the lack of concentrated and sustained support available during a controlled trial.