Science.gov

Sample records for programs manual chapter

  1. Program Evaluation: Resource Manual.

    ERIC Educational Resources Information Center

    Hayden, David L.

    Intended for administrators and evaluators, the manual identifies models useful in evaluating special education programs in Maryland. An introduction to program evaluation, defines the concept of educational program evaluation, notes its purpose, and addresses its current status in the field of special education. Chapter 2 goes into greater depth…

  2. Spectrum Orbit Utilization Program documentation: SOUP5 version 3.8 user's manual, volume 1, chapters 1 through 5

    NASA Technical Reports Server (NTRS)

    Davidson, J.; Ottey, H. R.; Sawitz, P.; Zusman, F. S.

    1985-01-01

    The underlying engineering and mathematical models as well as the computational methods used by the Spectrum Orbit Utilization Program 5 (SOUP5) analysis programs are described. Included are the algorithms used to calculate the technical parameters, and references to the technical literature. The organization, capabilities, processing sequences, and processing and data options of the SOUP5 system are described. The details of the geometric calculations are given. Also discussed are the various antenna gain algorithms; rain attenuation and depolarization calculations; calculations of transmitter power and received power flux density; channelization options, interference categories, and protection ratio calculation; generation of aggregrate interference and margins; equivalent gain calculations; and how to enter a protection ratio template.

  3. Healthy Young Children: A Manual for Programs.

    ERIC Educational Resources Information Center

    Kendrick, Abby Shapiro, Ed.; And Others

    This manual, which was developed as a reference and resource guide for program directors and teachers of young children, describes high standards for health policies. Also provided are information based on current research and recommendations from experts in health and early childhood education. The manual contains 7 sections and 19 chapters.…

  4. FDAS EPROM programming manual

    SciTech Connect

    Baker, J.

    1982-07-01

    This brief manual is intended as a guide for producing programmed Erasable-Programmable-Read-Only-Memories (EPROMs) for the microprocessor-based data acquisition system. Also included is a section on verifying the EPROMs in an FDAS unit.

  5. Fire Protection Program Manual

    SciTech Connect

    Sharry, J A

    2012-05-18

    This manual documents the Lawrence Livermore National Laboratory (LLNL) Fire Protection Program. Department of Energy (DOE) Orders 420.1B, Facility Safety, requires LLNL to have a comprehensive and effective fire protection program that protects LLNL personnel and property, the public and the environment. The manual provides LLNL and its facilities with general information and guidance for meeting DOE 420.1B requirements. The recommended readers for this manual are: fire protection officers, fire protection engineers, fire fighters, facility managers, directorage assurance managers, facility coordinators, and ES and H team members.

  6. Child Nutrition Programs. Administrative Manual.

    ERIC Educational Resources Information Center

    Utah State Office of Education, Salt Lake City.

    Recognizing the importance of efficient and effective program administration for the success of Utah's Child Nutrition Programs, the State Office of Education developed a manual to assist local program administrators in using the U.S. Department of Agriculture's (USDA's) programs. This document contains Part 1 of the manual's four interrelated…

  7. 14 CFR 36.105 - Flight Manual Statement of Chapter 4 equivalency.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Flight Manual Statement of Chapter 4... Airplanes and Jet Airplanes § 36.105 Flight Manual Statement of Chapter 4 equivalency. For each airplane... by the FAA to be equivalent to the Chapter 4 noise level required by the International Civil...

  8. 14 CFR 36.105 - Flight Manual Statement of Chapter 4 equivalency.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Flight Manual Statement of Chapter 4... Airplanes and Jet Airplanes § 36.105 Flight Manual Statement of Chapter 4 equivalency. For each airplane that meets the requirements for Stage 4 certification, the Airplane Flight Manual or operations...

  9. Manual of Accreditation Standards for Adventure Programs 1995.

    ERIC Educational Resources Information Center

    Williamson, John E., Comp.; Gass, Michael, Comp.

    This manual presents standards for adventure education programs seeking accreditation from the Association for Experiential Education. The manual is set up sequentially, focusing both on objective standards such as technical risk management aspects, and on subjective standards such as teaching approaches used in programs. Chapter titles provide…

  10. State Energy Program Operations Manual

    SciTech Connect

    Office of Building Technology, State and Community Programs

    1999-03-17

    The State Energy Program Operations Manual is a reference tool for the states and the program officials at the U.S. Department of Energy's Office of Building Technology, State and Community Programs and Regional Support Offices as well as State Energy Offices. The Manual contains information needed to apply for and administer the State Energy Program, including program history, application rules and requirements, and program administration and monitoring requirements.

  11. 78 FR 48696 - Draft Revisions to the Marine Safety Manual, Volume III, Chapters 20-26

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-09

    ... SECURITY Coast Guard Draft Revisions to the Marine Safety Manual, Volume III, Chapters 20-26 AGENCY: Coast... discusses the substantive changes to chapters 20 through 26 of MSM Volume III. The Coast Guard seeks and... Notice and Draft of MSM Volume III, Chapters 20-26: To view this Commandant Change notice and Draft...

  12. Prevention Program Management. Participant Manual.

    ERIC Educational Resources Information Center

    University Research Corp., Bethesda, MD.

    This training package, which centers on effective management and the operation of valid prevention programs, presents a five-day training experience designed to help managers of substance-abuse prevention programs. In this participant manual, the introduction includes a list of program goals and objectives and a summary of the ten individual…

  13. Prevention Program Management. Trainer Manual.

    ERIC Educational Resources Information Center

    University Research Corp., Bethesda, MD.

    This training package, which centers on effective management and the operation of valid prevention programs, presents a five-day training experience designed to help managers of substance-abuse prevention programs. In this trainer manual, the introduction includes a list of course goals and objectives, a summary of the ten individual training…

  14. A linear programming manual

    NASA Technical Reports Server (NTRS)

    Tuey, R. C.

    1972-01-01

    Computer solutions of linear programming problems are outlined. Information covers vector spaces, convex sets, and matrix algebra elements for solving simultaneous linear equations. Dual problems, reduced cost analysis, ranges, and error analysis are illustrated.

  15. ISSUES MANAGEMENT PROGRAM MANUAL

    SciTech Connect

    Gravois, Melanie

    2007-06-27

    The Lawrence Berkeley National Laboratory (LBNL) Issues Management Program encompasses the continuous monitoring of work programs, performance and safety to promptly identify issues to determine their risk and significance, their causes, and to identify and effectively implement corrective actions to ensure successful resolution and prevent the same or similar problems from occurring. This document describes the LBNL Issues Management Program and prescribes the process for issues identification, tracking, resolution, closure, validation, and effectiveness of corrective actions. Issues that are governed by this program include program and performance deficiencies or nonconformances that may be identified through employee discovery, internal or external oversight assessment findings, suggested process improvements and associated actions that require formal corrective action. Issues may also be identified in and/or may result in Root Cause Analysis (RCA) reports, Price Anderson Amendment Act (PAAA) reports, Occurrence Reporting and Processing System (ORPS) reports, Accident Investigation reports, assessment reports, and External Oversight reports. The scope of these issues may include issues of both high and low significance as well as adverse conditions that meet the reporting requirements of the University of California (UC) Assurance Plan for LBNL or other reporting entities (e.g., U.S. Environmental Protection Agency, U.S. Department of Energy). Issues that are found as a result of a walk-around or workspace inspection that can be immediately corrected or fixed are exempt from the requirements of this document.

  16. Photomask and pattern programming manual

    NASA Technical Reports Server (NTRS)

    Kirschman, R. K.

    1978-01-01

    A user's manual for a set of computer programs written in FORTRAN for the layout and generation of photomasks is presented. A limited amount of related information on photomasks, their design, and use is included. Input to the programs includes data describing the photomask design. Possible outputs include plots of the layout and a magnetic tape for controlling generation of the photomask by a pattern generator.

  17. Secondary School Mathematics, Chapter 21, Rigid Motions and Vectors, Chapter 22, Computer and Programs. Teacher's Commentary.

    ERIC Educational Resources Information Center

    Stanford Univ., CA. School Mathematics Study Group.

    The teacher's guide for the eleventh unit in this SMSG series covers the chapter on rigid motions and vectors and the chapter on computers and programs. The overall purpose for each of the chapters is described, the prerequisite knowledge needed by students is specified, the mathematical development of each chapter is detailed, behavioral…

  18. The Melwood Manual: A Planning and Operations Manual for Horticultural Training and Work Co-op Programs.

    ERIC Educational Resources Information Center

    Melwood Horticultural Training Center, Inc., Upper Marlboro, MD.

    This manual is intended as a resource for anyone involved in planning, developing, and/or operating a horticultural training or work co-op program for the handicapped. Following an introductory chapter, the manual is divided into three parts with the greatest weight given to the second part. Part I elaborates on development of the horticulture…

  19. The Comprehensive Competencies Program Reference Manual. Volume I. Introduction.

    ERIC Educational Resources Information Center

    Taggart, Robert

    Chapter 1 of this reference manual is a summary of the comprehensive competencies program (CCP). It describes this system for organizing, implementing, managing, and efficiently delivering individualized self-paced instruction, combined with group and experience-based learning activities, using computer-assisted instruction. (The CCP covers not…

  20. Home audit program: management manual

    SciTech Connect

    Not Available

    1980-09-01

    Many public power systems have initiated home energy audit programs in response to the requests of their consumers. The manual provides smaller public power systems with the information and specific skills needed to design and develop a program of residential energy audits. The program is based on the following precepts: locally owned public systems are the best, and in many cases the only agencies available to organize and coordinate energy conservation programs in many smaller communities; consumers' rights to energy conservation information and assistance should not hinge on the size of the utility that serves them; in the short run, public power systems of all sizes should offer residential energy conservation assistance to their consumers, because such assistance is desirable, necessary, and in the public interest; and in the long run, such programs will complement national energy goals and will produce economic benefits for both consumers and the public power system. A detailed description of home audit program planning, organization, and management are given. (MCW)

  1. 14 CFR 36.105 - Flight Manual Statement of Chapter 4 equivalency.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... equivalency. 36.105 Section 36.105 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT NOISE STANDARDS: AIRCRAFT TYPE AND AIRWORTHINESS CERTIFICATION Transport Category Large Airplanes and Jet Airplanes § 36.105 Flight Manual Statement of Chapter 4 equivalency. For each...

  2. Programmer's manual for the Banning artwork program

    NASA Technical Reports Server (NTRS)

    Taylor, J. F.

    1970-01-01

    The document is intended to serve as the programmer's Manual for the Banning Artwork Program. A detailed description of the internal logic and flow of the Artwork Program has been included in this report. It is recommended that every user review this manual in order to receive an appreciation of the functions performed by the Artwork Program; however, the User's Manual for the Artwork Program contains sufficient information to allow the designer/engineer to efficiently use the Artwork Program. Before beginning a detailed study of this Programmer's Manual, the reader should have a complete understanding of the contents of the User's Manual for the Banning Artwork Program. It is assumed that the programmer using this manual has a working knowledge of FORTRAN IV.

  3. Health Professions and Nursing Student Loan and Scholarship Programs. Manual of Information, Policies, and Procedures.

    ERIC Educational Resources Information Center

    National Institutes of Health (DHEW), Bethesda, MD. Bureau of Health Manpower Education.

    This manual covers basic policies and procedures governing four student loan and scholarship programs administered within the Bureau of Health Manpower, National Institutes of Health. An introductory chapter provides definitions, procedures, and reporting common to all programs, and this is followed by chapters describing: (1) The Health…

  4. Physical Fitness Programs for Law Enforcement Officers: A Manual for Police Administrators.

    ERIC Educational Resources Information Center

    Price, Clifford S.; And Others

    This manual is the final report of a study on the development of methods and programs to promote physical fitness among police officers. In twelve chapters the following topics are covered: (1) principles of exercise; (2) research methodology used to compile this manual; (3) results of physical fitness evaluation of program volunteers; (4)…

  5. ROOT CAUSE ANALYSIS PROGRAM MANUAL

    SciTech Connect

    Gravois, Melanie C.

    2007-05-02

    Root Cause Analysis (RCA) identifies the cause of an adverse condition that, if corrected, will preclude recurrence or greatly reduce the probability of recurrence of the same or similar adverse conditions and thereby protect the health and safety of the public, the workers, and the environment. This procedure sets forth the requirements for management determination and the selection of RCA methods and implementation of RCAs that are a result of significant findings from Price-Anderson Amendments Act (PAAA) violations, occurrences/events, Significant Adverse Conditions, and external oversight Corrective Action Requests (CARs) generated by the Office of Enforcement (PAAA headquarters), the U.S. Environmental Protection Agency, and other oversight entities against Lawrence Berkeley National Laboratory (LBNL). Performance of an RCA may result in the identification of issues that should be reported in accordance with the Issues Management Program Manual.

  6. Manual for a Summer Reading Program.

    ERIC Educational Resources Information Center

    Medina, Sue O.

    This manual provides suggestions for materials and projects to carry out a summer reading program for children based on a monster theme. The planning process outlined may be used as a "how-to" guide for developing summer reading programs on other themes as well. In addition to general guidelines, the manual provides information on the following…

  7. Secondary School Mathematics, Chapter 21, Rigid Motions and Vectors, Chapter 22, Computers and Programs. Student's Text.

    ERIC Educational Resources Information Center

    Stanford Univ., CA. School Mathematics Study Group.

    Transformation geometry topics are covered in one chapter of Unit 11 of this SMSG series. Work with translations, reflections, rotations, and composition of motions is included; vectors are briefly discussed. The chapter on computers and programming deals with recent history and uses of of the computer, organization of a digital computer, an…

  8. EKG Interpretation Program. Trainers Manual.

    ERIC Educational Resources Information Center

    Webb, Sandra M.

    This trainer's manual is designed to assist nursing instructors assigned to advanced medical surgical nursing courses in teaching students how to make basic interpretations of their patients' electrocardiographic (EKG) strips. Included in the manual are pre- and posttests and instructional units dealing with the following topics: EKG indicators,…

  9. A weatherization manual for LIHEAP policy makers and program administrators

    SciTech Connect

    Witherspoon, M.J.; Marabate, R.; Weinhaus, M.; Eisenberg, J.F.

    1993-09-01

    This manual is designed to provide Low-Income Home Energy Assistance Program (LIHEAP) directors with information about weatherization and innovative ways they can utilize LIHEAP funds for weatherization activities. It contains a description of innovative weatherization programs which demonstrate creative uses of LIHEAP funds in weatherization activities. In many of the innovative examples, state and local administrators are coordinating their LIHEAP funds with the US Department of Energy (DOE) Low-Income Weatherization Assistance Program`s funding and with a variety of other federal, state and utility company resources. The innovative programs demonstrate how LIHEAP funds can be used in client education, targeting high energy users, staff training, assessment and audits for weatherization services. The reader will find in the appendices lists of contact persons and further descriptions of the programs highlighted. Although designed with LIHEAP directors in mind, the practices and programs highlighted in this manual are of practical use to any state, local or utility weatherization program administrator. The glossary at the end of the descriptive chapters will assist readers with the terminology used throughout the manual. This manual and the many resource entities cited in its appendices provide ready access to a wealth of state-of-the-art information which could lead to a more cost-effective expenditure of LIBEAP weatherization dollars.

  10. Financing and Sustaining Mobility Programs in Rural Areas: A Manual. Final Report.

    ERIC Educational Resources Information Center

    Wallin, Theodore A.; Kidder, Alice

    This manual focuses on the start-up and operation of low-cost transportation in rural areas. A principal focus is the use of volunteers and/or the consolidation of rides through a brokerage program. Chapter One provides an overview of what financial and operating decisions must be made to design a volunteer system. Chapter Two describes easy…

  11. Mask Analysis Program (MAP) reference manual

    NASA Technical Reports Server (NTRS)

    Mitchell, C. L.

    1976-01-01

    A document intended to serve as a User's Manual and a Programmer's Manual for the Mask Analysis Program is presented. The first portion of the document is devoted to the user. It contains all of the information required to execute MAP. The remainder of the document describes the details of MAP software logic. Although the information in this portion is not required to run the program, it is recommended that every user review it to gain an appreciation for the program functions.

  12. Lights, Camera, Read! Arizona Reading Program Manual.

    ERIC Educational Resources Information Center

    Arizona State Dept. of Library, Archives and Public Records, Phoenix.

    This document is the manual for the Arizona Reading Program (ARP) 2003 entitled "Lights, Camera, Read!" This theme spotlights books that were made into movies, and allows readers to appreciate favorite novels and stories that have progressed to the movie screen. The manual consists of eight sections. The Introduction includes welcome letters from…

  13. FDA (food and drug administration) compliance program guidance manual (fy 84). Section 6. Radiological health

    SciTech Connect

    Not Available

    1983-10-01

    The FDA Compliance Program Guidance Manual provides a system for issuing and filing written program plans and instructions directed to Food and Drug Administration Field operations for project implementation. Section VI provides those chapters of the Compliance Program Guidance Manual which pertain to the area of radiological health. Some of the areas of coverage include laser standards; compliance testing of x-ray equipment, ultrasonic therapy devices, mercury vapor lamps, television receivers, and microwave ovens; radiation policy; and imported electronic products.

  14. Day Camp Manual: Program. Book IV.

    ERIC Educational Resources Information Center

    Babcock, William

    Book IV in a 5-book day camp manual discusses the camp program. Section I describes the organization, definition, and elements essential to successful day camp programs. Section II, which addresses the benefits and special considerations of mass programs, includes rainy day contingencies, materials to have on hand, and activity suggestions.…

  15. Michigan School Readiness Program: Implementation Manual.

    ERIC Educational Resources Information Center

    Michigan State Dept. of Education, Lansing.

    In operation since 1988, the Michigan School Readiness Program (MSRP) provides high-quality preschool programs for children who may be at risk of becoming educationally disadvantaged and who may have needs for special assistance. This manual provides guidelines for implementing all aspects of the program, including applying for funding, recruiting…

  16. Report of Evaluation, Chapter I Mathematics Program, 1982-83.

    ERIC Educational Resources Information Center

    Tompkins, John F.

    The Des Moines Chapter I math program served 1110 students in grades 1-8 during school year 1982-83. The total population of Chapter I students attained the established criteria for achievement gains but the gains for grades 7 and 8, taken alone, were lower than the goals. The same was true for mastery of math objectives. All parent contact…

  17. Chapter I Mathematics Program, 1982-83. Report of Evaluation.

    ERIC Educational Resources Information Center

    Tompkins, John F.

    The Des Moines (Iowa) Independent Community School District Chapter I Mathematics Program served 1,110 students in grades 2-8. Chapter I Math students in grades two through six achieved gains on the Iowa Tests of Basic Skills from pre to posttesting. Scores on these tests are reported using a metric known as the Normal Curve Equivalent (NCE). The…

  18. Aircraft noise prediction program user's manual

    NASA Technical Reports Server (NTRS)

    Gillian, R. E.

    1982-01-01

    The Aircraft Noise Prediction Program (ANOPP) predicts aircraft noise with the best methods available. This manual is designed to give the user an understanding of the capabilities of ANOPP and to show how to formulate problems and obtain solutions by using these capabilities. Sections within the manual document basic ANOPP concepts, ANOPP usage, ANOPP functional modules, ANOPP control statement procedure library, and ANOPP permanent data base. appendixes to the manual include information on preparing job decks for the operating systems in use, error diagnostics and recovery techniques, and a glossary of ANOPP terms.

  19. Maryland Community Colleges Instructional Program Manual.

    ERIC Educational Resources Information Center

    Maryland State Board for Community Colleges, Annapolis.

    Guidelines are presented for consideration in the development, review, submission, and approval of all new instructional programs in the Maryland Community Colleges (MCC). The first section of the manual explains: (1) operational definitions for transfer and occupational programs; (2) the five-year state plan listing; (3) letters of intent and…

  20. ILLIAC 4 systems characteristics and programming manual

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The latest edition is presented of the Systems Characteristics and Programming Manual of the ILLIAC 4 array and parallel disc memory system. The major aspects of the array described include: the array systems characteristics, programming characteristics, definition and flow charts, and timing. A glossary of terms, and an instruction index are included.

  1. Chapter 5: Long-term benefits analysis of EERE's Programs

    SciTech Connect

    None, None

    2009-01-18

    This chapter provides an overview of the modeling approach used in MARKAL-GPRA05 to evaluate the benefits of EERE R&D programs and technologies. The program benefits reported in this section result from comparisons of each Program Case to the Baseline Case, as modeled in MARKAL-GPRA05.

  2. Chapter 5: Long-term benefits analysis of EERE's programs

    SciTech Connect

    None, None

    2009-01-18

    This chapter provides an overview of the modeling approach used in MARKAL-GPRA06 to evaluate the benefits of EERE R&D programs and technologies. The program benefits reported in this section result from comparisons of each Program Case to the Baseline Case, as modeled in MARKAL-GPRA06.

  3. Packaging and transportation manual. Chapter on the packaging and transportation of hazardous and radioactive waste

    SciTech Connect

    1998-03-01

    The purpose of this chapter is to outline the requirements that Los Alamos National Laboratory employees and contractors must follow when they package and ship hazardous and radioactive waste. This chapter is applied to on-site, intra-Laboratory, and off-site transportation of hazardous and radioactive waste. The chapter contains sections on definitions, responsibilities, written procedures, authorized packaging, quality assurance, documentation for waste shipments, loading and tiedown of waste shipments, on-site routing, packaging and transportation assessment and oversight program, nonconformance reporting, training of personnel, emergency response information, and incident and occurrence reporting. Appendices provide additional detail, references, and guidance on packaging for hazardous and radioactive waste, and guidance for the on-site transport of these wastes.

  4. Hanford internal dosimetry program manual

    SciTech Connect

    Carbaugh, E.H.; Sula, M.J.; Bihl, D.E.; Aldridge, T.L.

    1989-10-01

    This document describes the Hanford Internal Dosimetry program. Program Services include administrating the bioassay monitoring program, evaluating and documenting assessments of internal exposure and dose, ensuring that analytical laboratories conform to requirements, selecting and applying appropriate models and procedures for evaluating internal radionuclide deposition and the resulting dose, and technically guiding and supporting Hanford contractors in matters regarding internal dosimetry. 13 refs., 16 figs., 42 tabs.

  5. Program planning, chapter 5, part D

    NASA Technical Reports Server (NTRS)

    1975-01-01

    Recommendations for future activities necessary to support satellite microwave sensing are reported. Areas covered include component development, data processing, calibration, design and fabrication of multifrequency systems, and experimental test programs to establish interactions of electromagnetic waves and sensed parameters.

  6. Project WISP/Outreach: Parent Program Manual.

    ERIC Educational Resources Information Center

    Flynn, Morita N.

    The manual sets forth guidelines on developing a parent involvement component as part of an early intervention effort for handicapped children. Modeled after Project WISP (Wyoming Infant Stimulation Program), the guidelines emphasize the role of the parent coordinator in communicating with parents and acting as a resource person. Parent…

  7. The Intergenerational Caregiving Program: A Replication Manual.

    ERIC Educational Resources Information Center

    Cohen, Marlene Cresci; And Others

    The Intergenerational Caregiving Program (ICP), a year long educational experience in human development and child care for older adults, is described in this replication manual. In its first year of operation, the ICP recruited older, usually retired adults from agencies and organizations in San Francisco that serve older people. The 22 older…

  8. Training Guide for Foodservice Personnel in Programs for Young Children. A Manual for Nutritionists, Dietitians, and Foodservice Specialists Who Are Developing and Conducting Training Programs.

    ERIC Educational Resources Information Center

    Development Associates, Inc., Arlington, VA.

    This manual is a competency-based curriculum planning guide for nutritionists, dietitians, and foodservice specialists to use in conducting preservice and inservice training programs for foodservice personnel in Head Start, day care, and other preschool programs. After an introductory chapter, which states the purpose of the manual, defines…

  9. Chapter 636, Voluntary Integration in Massachusetts. Successful Programs of Choice.

    ERIC Educational Resources Information Center

    Spier, Adele W.; And Others

    A statewide study was conducted to identify and describe successful voluntary school desegregation programs funded under Chapter 636, a 1974 amendment to Massachussets' Racial Imbalance Law. Programs selected were of four types: (1) school-based (elementary, middle, and high); (2) school system- or district-wide; (3) part-time and full-time…

  10. Evaluation of the 1985 Chapter 1 Citywide Summer School Program.

    ERIC Educational Resources Information Center

    Detroit Public Schools, MI. Dept. of Evaluation and Testing.

    Described are aspects of the evaluation of the Detroit (Michigan) Public Schools' 1985 Chapter 1 Citywide Summer School program, a program implemented to improve the reading and mathematics skills of students from pre-kindergarten classes through grade 8. A random sample of 18 schools, including elementary and middle schools, was selected for…

  11. Environmental Compliance Audit& Assessment Program Manual

    SciTech Connect

    Thorson, Patrick; Baskin, David; Borglin, Ned; Fox, Robert; Wahl, Linnea; Hatayama, Howard; Pauer, Ronald

    2009-03-13

    This document describes the elements, schedule, roles, and responsibilities of the Lawrence Berkeley National Laboratory (LBNL) Environmental Compliance Audit & Assessment Program (ECAAP). The ECAAP has been developed to meet the requirements of DOE Order 450.1A,1 and Executive Order 13423.2 These referenced Orders stipulate that government agencies must develop environmental compliance audit programs to monitor and improve compliance with environmental regulations. As stated specifically in the DOE Order, as a part of a DOE facility's Environmental Management System (EMS), 'An environmental compliance audit and review program that identifies compliance deficiencies and root causes of non-compliance' shall be developed and implemented. The ECAAP has also been developed to satisfy LBNL's institutional technical assurance assessment requirements promulgated in the Environment, Safety and Health (ES&H) Self-Assessment Program (LBNL/PUB-5344) and described by the ES&H Technical Assurance Program (TAP) Manual (LBNL/PUB-913E). The ES&H TAP Manual provides the framework for systematic reviews of ES&H programs with the intent to provide assurance that these programs comply with their guiding regulations, are effective, and are properly implemented. As required by the DOE and Executive Orders and by LBNL's TAP, the goal of the ECAAP is to identify environmental regulatory compliance deficiencies and to determine their respective causes. The ECAAP then provides a means of correcting any deficiencies identified, and leads to continually improving environmental compliance performance.

  12. TAP 3, Training Program Support Manual

    SciTech Connect

    Not Available

    1991-07-01

    Training programs at DOE facilities should provide well-trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor nuclear facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically determined job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently and effectively meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two companion manuals provide additional information to assist contractors in their efforts to accredit training programs.

  13. Sodankylä manual snow survey program

    NASA Astrophysics Data System (ADS)

    Leppänen, L.; Kontu, A.; Hannula, H.-R.; Sjöblom, H.; Pulliainen, J.

    2015-12-01

    The manual snow survey program of the Arctic Research Centre of Finnish Meteorological Institute (FMI-ARC) consists of numerous observations of natural seasonal taiga snowpack in Sodankylä, northern Finland. The easily accessible measurement areas represent the typical forest and soil types in the boreal forest zone. Systematic snow measurements began in 1909 with snow depth (SD) and snow water equivalent (SWE); however some older records of the snow and ice cover exists. In 2006 the manual snow survey program expanded to cover snow macro- and microstructure from regular snow pits at several sites using both traditional and novel measurement techniques. Present-day measurements include observations of SD, SWE, temperature, density, horizontal layers of snow, grain size, specific surface area (SSA), and liquid water content (LWC). Regular snow pit measurements are performed weekly during the snow season. Extensive time series of manual snow measurements are important for the monitoring of temporal and spatial changes in seasonal snowpack. This snow survey program is an excellent base for the future research of snow properties.

  14. Sodankylä manual snow survey program

    NASA Astrophysics Data System (ADS)

    Leppänen, Leena; Kontu, Anna; Hannula, Henna-Reetta; Sjöblom, Heidi; Pulliainen, Jouni

    2016-05-01

    The manual snow survey program of the Arctic Research Centre of the Finnish Meteorological Institute (FMI-ARC) consists of numerous observations of natural seasonal taiga snowpack in Sodankylä, northern Finland. The easily accessible measurement areas represent the typical forest and soil types in the boreal forest zone. Systematic snow measurements began in 1909 with snow depth (HS) and snow water equivalent (SWE). In 2006 the manual snow survey program expanded to cover snow macro- and microstructure from regular snow pits at several sites using both traditional and novel measurement techniques. Present-day snow pit measurements include observations of HS, SWE, temperature, density, stratigraphy, grain size, specific surface area (SSA) and liquid water content (LWC). Regular snow pit measurements are performed weekly during the snow season. Extensive time series of manual snow measurements are important for the monitoring of temporal and spatial changes in seasonal snowpack. This snow survey program is an excellent base for the future research of snow properties.

  15. 14 CFR 91.1023 - Program operating manual requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Ownership Operations Program Management § 91.1023 Program operating manual requirements. (a) Each program manager must prepare and keep current a program operating manual setting forth procedures and policies acceptable to the Administrator. The program manager's management, flight, ground, and maintenance...

  16. Self-Study Manual on Optical Radiation Measurements: Part I--Concepts, Chapters 1 to 3. NBS Technical Note 910-1.

    ERIC Educational Resources Information Center

    Nicodemus, Fred E., Ed.

    This is the initial publication of a series of self-study manuals on optical radiation measurement, and contains the first three chapters. Additional chapters will be published when completed. These chapters include: an introduction to optical radiation and the ray approach to its treatment; an introduction to the basic radiometric quantity…

  17. Peace Corps Aquaculture Training Manual. Training Manual T0057.

    ERIC Educational Resources Information Center

    Peace Corps, Washington, DC. Information Collection and Exchange Div.

    This Peace Corps training manual was developed from two existing manuals to provide a comprehensive training program in fish production for Peace Corps volunteers. The manual encompasses the essential elements of the University of Oklahoma program that has been training volunteers in aquaculture for 25 years. The 22 chapters of the manual are…

  18. Chemical Dependency and Violence: Working with Dually Affected Families. A Cross-Training Program Manual for Counselors and Advocates.

    ERIC Educational Resources Information Center

    Wright, Janet M.

    This manual is designed as a cross-training program guide for counselors working in the fields of woman abuse and chemical dependency. (A cross-training program is a system for one (or more) agency personnel to train each other in their respective areas of expertise.) Chapter 1 discusses the rationale and goals of a cross-training program; issues…

  19. Summer Science Student Program: a replication manual

    SciTech Connect

    Not Available

    1981-01-01

    The Summer Science Student Program (SSSP) combines basic skill enrichment (in science, math, and communications), career motivation, and energy awareness to encourage economically disadvantaged and academically talented youth to complete high school and pursue energy-related careers. The program is designed to enrich the academic experiences of the youth while they are in high school and to increase their awareness of energy issues and career opportunities in energy technology. Ultimately, SSSP helps to prepare these youth to enter postsecondary education or skill training leading to technical, paraprofessional, and professional energy-related careers. The purpose of this manual is to provide DOE contractors, private industry, prime sponsors, and community-based organizations with information that can be used in SSSP replication and continuation efforts. Some of the challenges met in the programs's initial implementation are reviewed, and a step-by-step procedure for establishing new SSSP sites is described. 9 figures. (RWR)

  20. Getting the Most from Pi Sigma Alpha Chapters: Exploring the Chapter Activity Grant Program and Its Multiplier Effects

    ERIC Educational Resources Information Center

    Alexander, Robert M.

    2009-01-01

    The political science honor society, Pi Sigma Alpha, has chapters in nearly 700 institutions across the United States. The organization sponsors many programs that can contribute a great deal to students of political science; however, many students are unaware of these opportunities. This article encourages chapter advisors to make use of these…

  1. Highway Safety Program Manual: Volume 13: Traffic Engineering Services.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 13 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on traffic engineering services. The introduction outlines the purposes and objectives of Highway Safety Program Standard 13 and the Highway Safety Program Manual. Program development and…

  2. Best Practices Manual for Idaho Gifted/Talented Programs.

    ERIC Educational Resources Information Center

    Idaho State Dept. of Education. Special Education Section.

    This manual for Idaho school districts covers the identification, assessment, and educational needs of students who show intellectual promise, specific academic performance, leadership, creativity, or talent in the visual or performing arts. It is organized into seven chapters and seven appendices which take up approximately half the publication.…

  3. 42 CFR 431.18 - Availability of agency program manuals.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Availability of agency program manuals. 431.18 Section 431.18 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Agency § 431.18 Availability of agency program manuals. (a) Basis and purpose. This section, based...

  4. Manual of an Instructional Program in Dental Assisting.

    ERIC Educational Resources Information Center

    Gilbert, Maud R., Ed.; Fiedler, Belle, Ed.

    This manual is for administrator and teacher use in planning a program and individual courses for adults in dental assisting in vocational, technical, and adult programs. The manual was developed by a supervisor, a teacher-coordinator, teachers, and dentists at the local level and tested in the local school. The objectives are to prepare…

  5. Readers on the Prowl: Florida Library Youth Program Manual.

    ERIC Educational Resources Information Center

    Johnson, Margie, Comp.; Cook, Ann, Comp.; O'Reilly, Lesley, Comp.

    This manual is designed to accompany the 1999 Florida Library Youth Program, focusing on the theme of the library as a destination. This introductory section of the manual contains: an overview of the program that discusses basic philosophy, outreach to children in poverty, age and ability levels, and materials and incentives; a schedule of…

  6. Chapter 1 Reading Program. Final Evaluation Report 1994-95. Elementary and Secondary Education Act--Chapter 1.

    ERIC Educational Resources Information Center

    Lore, Rosemary

    A study evaluated the Chapter 1 Reading Program that served 5,914 underachieving pupils in grades 1 through 8 in the Columbus, Ohio, public schools. The program provided service to 84 public elementary schools, 26 public middle schools, and 11 nonpublic schools. These students appeared unlikely to learn to read successfully without additional…

  7. FDA Compliance Program Guidance Manual. Section VI. Radiological health

    SciTech Connect

    Not Available

    1981-10-01

    The FDA Compliance Program Guidance Manual provides a system for issuing and filing written program plans and instructions directed to Food and Drug Administration field operations for project implementation.

  8. DATA MONITORING AND ANALYSIS PROGRAM MANUAL

    SciTech Connect

    Gravois, Melanie

    2007-07-06

    This procedure provides guidelines and techniques for analyzing and trending data using statistical methods for Lawrence Berkeley National Laboratory (LBNL). This procedure outlines the steps used in data analysis and trending. It includes guidelines for performing data analysis and for monitoring (or controlling) processes using performance indicators. This procedure is used when trending and analyzing item characteristics and reliability, process implementation, and other quality-related information to identify items, services, activities, and processes needing improvement, in accordance with 10 CFR Part 830, Subpart A, U.S. Department of Energy (DOE) Order 414.1C, and University of California (UC) Assurance Plan for LBNL. Trend codes, outlined in Attachment 4, are assigned to issues at the time of initiation and entry into the Corrective Action Tracking System (CATS) database in accordance with LBNL/PUB-5519 (1), Issues Management Program Manual. Throughout this procedure, the term performance is used to encompass all aspects of performance including quality, timeliness, efficiency, effectiveness, and reliability. Data analysis tools are appropriate whenever quantitative information describing the performance of an item, service, or process can be obtained.

  9. Water treatment plant simulation program, version 1. 21, user's manual

    SciTech Connect

    Not Available

    1992-06-01

    The User's Manual for Version 1.21 of the Water Treatment Plant Simulation Program has been prepared to provide a basic understanding of (1) how to operate the program, and (2) the underlying assumptions and equations that are used to calculate the removal of natural organic matter and the formation of disinfection by-products. The manual represents the first public release of the program.

  10. Teamwork in Task Analysis. Training Manual V. Evaluation of the Marine Corps Task Analysis Program. Technical Report No. 9.

    ERIC Educational Resources Information Center

    Kuriloff, Arthur H.; Yoder, Dale

    This training manual provides guidelines for effective teamwork and work-team maintenance and development. It was designed for use in the Marine Corps Task Analysis program, in which staff members are organized to form a work-team whose continuing performance as an effective team is crucial for success of the project. Chapter 1, the major portion…

  11. A Manual for Use of BESTPRED: A Program for Estimation of Lactation Yield and Persistency Using Best Prediction

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This manual describes how to obtain, install, and run a Fortran 90 program for calculating lactation yields and persistencies using best prediction methodology. Chapters also present the theory underlying best prediction, describe the methodology used to calculate covariances among pairs of days in ...

  12. FDA (Food and Drug Administration) compliance program guidance manual (FY 87). Section 4. Medical and radiological devices

    SciTech Connect

    Not Available

    1987-01-01

    The FDA Compliance Program Guidance Manual provides a system for issuing and filing program plans and instructions directed to Food and Drug Administration Field operations for project implementation. Section IV provides those chapters of the Compliance Program Guidance Manual which pertain to the areas of medical and radiological devices. Some of the areas of coverage include laser and sunlamp standards inspections, compliance testing of various radiation-emitting products such as television receivers and microwave ovens, emergency response planning and policy, premarket approval and device manufacturers inspections, device problem reporting, sterilization of devices, and consumer education programs on medical and radiological devices.

  13. FDA (Food and Drug Administration) Compliance Program Guidance Manual. Section 4. Medical and radiological devices. Irregular report

    SciTech Connect

    Not Available

    1989-01-01

    The FDA Compliance Program Guidance Manual provides a system for issuing and filing program plans and instructions directed to Food and Drug Administration Field operations for project implementation. Section IV provides those chapters of the Compliance Program Guidance Manual which pertain to the areas of medical and radiological devices. Some of the areas of coverage include laser and sunlamp standards inspections, compliance testing of various radiation-emitting products such as television receivers and microwave ovens, emergency response planning and policy, premarket approval and device manufacturers inspections, device problem reporting, sterilization of devices, and consumer education programs on medical and radiological devices.

  14. FDA (Food and Drug Administration) Compliance Program Guidance Manual. Section 4. Medical and radiological devices. Basic section. (FY-89)

    SciTech Connect

    Not Available

    1989-01-01

    The Food and Drug Administration (FDA) Compliance Program Guidance Manual provides a system for issuing and filing program plans and instructions directed to the Food and Drug Administration Field operations for project implementation. Section IV provides those chapters of the Compliance Program Guidance Manual which pertain to the areas of medical and radiological devices. Some of the areas of coverage include laser and sunlamp standards inspections, compliance testing of various radiation-emitting products such as television receivers and microwave ovens, emergency response planning and policy, premarket approval and device manufacturers inspections, device problem reporting, sterilization of devices, and consumer education programs on medical and radiological devices.

  15. FDA (Food and Drug Administration) Compliance Program Guidance Manual (FY 88). Section 4. Medical and radiological devices

    SciTech Connect

    Not Available

    1988-01-01

    The FDA Compliance Program Guidance Manual provides a system for issuing and filing program plans and instructions directed to Food and Drug Administration Field operations for project implementation. Section IV provides those chapters of the Compliance Program Guidance Manual which pertain to the areas of medical and radiological devices. Some of the areas of coverage include laser and sunlamp standards inspections, compliance testing of various radiation-emitting products such as television receivers and microwave ovens, emergency response planning and policy, premarket approval and device manufacturers inspections, device problem reporting, sterilization of devices, and consumer education programs on medical and radiological devices.

  16. FDA (Food and Drug Administration) Compliance Program Guidance Manual (FY 85). Section 4. Medical and radiological devices

    SciTech Connect

    Not Available

    1985-01-01

    The FDA Compliance Program Guidance Manual provides a system for issuing and filing program plans and instructions directed to Food and Drug Administration Field operations for project implementation. Section IV provides those chapters of the Compliance Program Guidance Manual which pertain to the areas of medical and radiological devices. Some of the areas of coverage include laser and sunlamp standards inspections, compliance testing of various radiation-emitting products such as television receivers and microwave ovens, emergency response planning and policy, premarket approval and device manufacturers inspections, device problem reporting, sterilization of devices, and consumer education programs on medical and radiological devices.

  17. Healthy Young Children: A Manual for Programs, 4th Edition.

    ERIC Educational Resources Information Center

    Aronson, Susan S., Ed.

    Noting that the health component of child care should be planned to respond to the developmental patterns of young children, this manual was developed as a reference and resource guide for program directors and teachers of young children and can be used as a textbook for adult learners. The manual, based on national standards and reviewed by…

  18. The FCEOC Library: A Community Action Program. Operations Manual.

    ERIC Educational Resources Information Center

    Scott, R. E.

    The Fresno County (California) Economic Opportunities Commission (FCEOC) library produced this policy, procedures, and use manual as a guide for community action programs. The manual includes information on structure and use of the card catalog, organization of materials, use and organization of the vertical file, organization of grant research…

  19. Planning and Implementation Issues in Bilingual Education Programming. Manual V.

    ERIC Educational Resources Information Center

    Santos-Rivera, Iris; And Others

    Bilingual program development is thoroughly surveyed in this manual. Community involvement in program development is discussed, and suggestions for collecting socio-cultural data appropriate to community role are set forth. Various options for choosing a program at the elementary and secondary levels are presented. Program content is treated in…

  20. PVREG - A photovoltaic voltage regulation investigation tool: Program reference manual

    SciTech Connect

    Garrett, D.L.; Sims, T.R.; Jones, R.A.; Jeter, S.M.

    1989-06-01

    This manual provides information for installing and maintaining the computer program PVREG, a program developed to study the impact of distributed photovoltaic systems on the voltage regulation of distribution systems. The manual describes installation on the Apollo workstation or the IBM PC-AT (or compatible), but the instructions and code description should be general enough to assist installation on other computers, also. The manual assumes that the user is well acquainted with the computer on which the program is to operate and with the operating system of that computer. The manual describes the program structure and models in detail and provides step-by-step installation instructions for both the Apollo and AT-compatible computers. 9 figs., 11 tabs.

  1. CONIC program user's manual. [conic-section orbit calculation

    NASA Technical Reports Server (NTRS)

    1973-01-01

    A user's manual for the current CONIC computer program is presented. The program was written in FORTRAN for use on the TRW Time Share system. The CONIC program is used to calculate the relative motion of two bodies in any conic-section orbit (circular, elliptical, parabolic, or hyperbolic). This manual describes the basic equations used for trajectory propagation and defines the input and output parameters of the program. Sample runs with corresponding figures and a detailed flow chart of the program are included.

  2. Administrative Manual: Programs for Exceptional Children.

    ERIC Educational Resources Information Center

    Delaware State Dept. of Public Instruction, Dover. Exceptional Children/Special Programs Div.

    This manual incorporates the Delaware State Board of Education's rules and regulations governing the education of exceptional children and is intended to provide guidance and information to educators, administrators, parents, and the public. The section on handicapped children covers the following areas: access to special education and related…

  3. Highway Safety Program Manual: Volume 11: Emergency Medical Services.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 11 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on emergency medical services. The purpose of the program, Federal authority in the area of medical services, and policies related to an emergency medical services (EMS) program are…

  4. 14 CFR 91.1023 - Program operating manual requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false Program operating manual requirements. 91.1023 Section 91.1023 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... to the program flights in foreign countries, or the program manager's management specifications....

  5. TLC for Growing Minds. APPLE II Programming Manual, Volume 6.

    ERIC Educational Resources Information Center

    Taitt, Kathy

    Designed to improve students' thinking, learning, and creative skills while they learn to program a microcomputer in BASIC programing language, this instructional manual for advanced learners provides a brief section of information for each new topic together with a sample program to enter, run on the computer, and observe; a suggested change to…

  6. SNL/CA Environmental Management System Program Manual.

    SciTech Connect

    Larsen, Barbara L.

    2005-09-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program was developed in accordance with Department of Energy (DOE) Order 450.1 and incorporates the elements of the International Standard on Environmental Management Systems, ISO 14001.

  7. System optimization of gasdynamic lasers, computer program user's manual

    NASA Technical Reports Server (NTRS)

    Otten, L. J., III; Saunders, R. C., III; Morris, S. J.

    1978-01-01

    The user's manual for a computer program that performs system optimization of gasdynamic lasers is provided. Detailed input/output formats are CDC 7600/6600 computers using a dialect of FORTRAN. Sample input/output data are provided to verify correct program operation along with a program listing.

  8. TLC for Growing Minds. APPLE II Programming Manual, Volume 5.

    ERIC Educational Resources Information Center

    Taitt, Kathy

    Designed to improve students' thinking, learning, and creative skills while they learn to program a microcomputer in BASIC programing language, this instructional manual for advanced learners provides a brief section of information for each new topic together with a sample program to enter, run on the computer, and observe; a suggested change to…

  9. Sandia National Laboratories, California Environmental Management System program manual.

    SciTech Connect

    Larsen, Barbara L.

    2013-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 436.1.

  10. Sandia National Laboratories, California Environmental Management System program manual

    SciTech Connect

    Larsen, Barbara L.

    2014-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 436.1.

  11. Apollo Photograph Evaluation (APE) programming manual

    NASA Technical Reports Server (NTRS)

    Kim, I. J.

    1974-01-01

    This document describes the programming techniques used to implement the equations of the Apollo Photograph Evaluation (APE) program on the UNIVAC 1108 computer and contains detailed descriptions of the program structure, a User's Guide section to provide the necessary information for proper operation of the program, and information for the assessment of the program's adaptability to future problems.

  12. Hanford Internal Dosimetry Program Manual, PNL-MA-552

    SciTech Connect

    Carbaugh, Eugene H.; Bihl, Donald E.; Maclellan, Jay A.

    2009-09-24

    This manual is a guide to the services provided by the Hanford Internal Dosimetry Program (IDP), which is operated by the Pacific Northwest National Laboratory.( ) for the U.S. Department of Energy Richland Operations Office, Office of River Protection and their Hanford Site contractors. The manual describes the roles of and relationships between the IDP and the radiation protection programs of the Hanford Site contractors. Recommendations and guidance are also provided for consideration in implementing bioassay monitoring and internal dosimetry elements of radiation protection programs.

  13. Workplace Learning Provider's Manual. Practical Steps for Developing Programs.

    ERIC Educational Resources Information Center

    Pacific Management and Research Associates, Sacramento, CA.

    This handbook provides a broad overview of the stages and activities to be undertaken to establish workplace learning (WPL) programs. It is designed to lead WPL service providers and employers through the process of developing a WPL program. Each chapter begins by stating the purpose and the outcomes expected upon completion. Throughout the manual…

  14. Hanford Internal Dosimetry Program Manual, PNL-MA-552

    SciTech Connect

    Carbaugh, Eugene H.; Bihl, Donald E.; Maclellan, Jay A.

    2003-10-10

    This manual is a guide to the services provided by the Hanford Internal Dosimetry Program (IDP). It describes the roles of and relationships between the IDP and site contractors, and provides recommendations and guidance for consideration in implementing bioassay monitoring and internal dosimetry elements of radiation protection programs. Guidance includes identifying conditions under which workers should be placed on bioassay programs, types, descritptions, and capabilities of measurements, suggested routine bioassay programs, limitations on services, and practices for recording and reporting results.

  15. SNL/CA Environmental Management System Program Manual.

    SciTech Connect

    Larsen, Barbara L.

    2007-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004. Elements of the ISO standard overlap with those of Department of Energy (DOE) Order 450.1, thus SNL/CA's EMS program also meets the DOE requirements.

  16. Highway Safety Program Manual: Volume 7: Traffic Courts.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 7 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on traffic courts, their purpose and objectives. Federal authority in the area of traffic courts are described. Program development and operations (a study of courts trying traffic cases, a…

  17. Highway Safety Program Manual: Volume O: Planning and Administration.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    As the introductory volume to the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices), the document concentrates on aspects of planning and administration of a statewide highway safety program. Topics discussed are: the purpose of planning and administration,…

  18. Highway Safety Program Manual: Volume 10: Traffic Records.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 10 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on traffic records. The purpose and specific objectives of a traffic records program are discussed. Federal authority in the area of highway safety and policies regarding a traffic records…

  19. Highway Safety Program Manual: Volume 4: Driver Education:

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 4 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on driver education. The purpose and specific objectives of the driver education program and general policies regarding driver education derived from the Federal standard are described.…

  20. Highway Safety Program Manual: Volume 1: Periodic Motor Vehicle Inspection.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 1 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices)focuses on periodic motor vehicle inspection by: (1) outlining the purpose and objectives of vehicle inspection, (2) establishing Federal authority for the program, and (3) citing general and…

  1. Highway Safety Program Manual: Volume 3: Motorcycle Safety.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 3 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on aspects of motorcycle safety. The purpose and specific objectives of a State motorcycle safety program are outlined. Federal authority in the highway safety area and general policies…

  2. Highway Safety Program Manual: Volume 5: Driver Licensing.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 5 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on driver licensing. The purpose and specific objectives of the driver licensing program are outlined. Federal authority in the area of driver licensing and general policies of a licensing…

  3. Highway Safety Program Manual: Volume 18: Accident Investigation and Reporting.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 18 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on accident investigation and reporting. The purpose and objectives of an investigation and reporting program are outlined. Federal authority in the area of highway safety and policies…

  4. Highway Safety Program Manual: Volume 17: Pupil Transportation Safety.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 17 of the 10-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on pupil transportation safety. The purpose and objectives of a pupil transportation safety program are outlined. Federal authority in the area of pupil transportation and policies…

  5. Highway Safety Program Manual: Volume 14: Pedestrian Safety.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 14 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on pedestrian safety. The purpose and objectives of a pedestrian safety program are outlined. Federal authority in the area of pedestrian safety and policies regarding a safety program…

  6. Highway Safety Program Manual: Volume 6: Codes and Laws.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 6 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred safety practices) concentrates on codes and laws. The purpose and specific objectives of the Codes and Laws Program, Federal authority in the area of highway safety, and policies regarding traffic regulation are described.…

  7. Highway Safety Program Manual: Volume 15: Police Traffic Services.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 15 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on police traffic services. The purpose and objectives of a police services program are described. Federal authority in the areas of highway safety and policies regarding a police traffic…

  8. A Boarding Home Program for Handicapped Children. A Manual.

    ERIC Educational Resources Information Center

    Melcher, John W.

    The manual discusses the Wisconsin boarding home program for handicapped children who live too far from special programs to commute daily. During the school week, the child lives with boarding home parents, who are paid by the Division for Handicapped Children's Services through the local school board. Explained are the child's needs (physical and…

  9. DORCA 2 computer program. Volume 2: Programmer's manual

    NASA Technical Reports Server (NTRS)

    Gold, B. J.

    1972-01-01

    A guide for coding the Dynamic Operational Requirements and Cost Analysis Program (DORCA 2) is presented. The manual provides a detailed operation of every subroutine, the layout in core of the major matrices and arrays, and the meaning of all program values. Flow charts are included.

  10. 14 CFR 91.1023 - Program operating manual requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... English language. If the program manager furnishes all or part of the manual in other than printed form... maintenance information and instructions in the English language. (h) If a program manager conducts aircraft... TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES...

  11. Dental Hygiene Program Clinic Manual, Fall 1997. Fourth Edition.

    ERIC Educational Resources Information Center

    Errico, Mary; Cama, Christine; Pastoriza-Maldonado, Alida

    This is the fourth edition of the Clinic Manual for the Dental Hygiene Program at Eugenio Maria de Hostos Community College in the Bronx (New York). It contains general information, grading procedures, performance guides, and clinical forms related to the program. Section 1 provides an introduction to clinic philosophy, policies, goals and…

  12. Therapeutic Ceramic Program for Special Students: Staff Development Manual.

    ERIC Educational Resources Information Center

    Kahn, Victoria

    The paper describes ways of incorporating a ceramic program into existing curricula for exceptional children. The program focuses on the process of producing clay products and has as its goals: tension release, heightened self-image, improved coordination, personal growth and emotional maturity. The manual describes organizatonal structure, goals,…

  13. SSME structural computer program development: BOPACE programmer manual

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The programming manual for the two-dimensional Boeing Plastic Analysis Capability for Engines (BOPACE) program written in FORTRAN IV is presented. The BOPACE flow logic is summarized along with subroutines and input/output files. Emphasis is placed on linear equation solver routines written as an independent package.

  14. 42 CFR 431.18 - Availability of agency program manuals.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 4 2011-10-01 2011-10-01 false Availability of agency program manuals. 431.18 Section 431.18 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS STATE ORGANIZATION AND GENERAL ADMINISTRATION Single...

  15. 45 CFR 205.70 - Availability of agency program manuals.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... (ASSISTANCE PROGRAMS), ADMINISTRATION FOR CHILDREN AND FAMILIES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... (AABD) of the Social Security Act must provide that: (a) Program manuals and other policy issuances.... Wide availability of agency policy materials is recommended. (c) Upon request, the agency...

  16. Police Robbery Control Manual.

    ERIC Educational Resources Information Center

    Ward, Richard H.; And Others

    The manual was designed as a practical guide for police department personnel in developing robbery control programs. An introductory chapter defines types of robberies and suggests administrative and operational uses of the manual. Research and control strategies are reported according to five robbery types: street (visible and non-visible),…

  17. WIPP waste characterization program sampling and analysis guidance manual

    SciTech Connect

    Not Available

    1991-01-01

    The Waste Isolation Pilot Plant (WIPP) Waste Characterization Program Sampling and Analysis Guidance Manual (Guidance Manual) provides a unified source of information on the sampling and analytical techniques that enable Department of Energy (DOE) facilities to comply with the requirements established in the current revision of the Quality Assurance Program Plan (QAPP) for the WIPP Experimental-Waste Characterization Program (the Program). This Guidance Manual includes all of the sampling and testing methodologies accepted by the WIPP Project Office (DOE/WPO) for use in implementing the Program requirements specified in the QAPP. This includes methods for characterizing representative samples of transuranic (TRU) wastes at DOE generator sites with respect to the gas generation controlling variables defined in the WIPP bin-scale and alcove test plans, as well as waste container headspace gas sampling and analytical procedures to support waste characterization requirements under the WIPP test program and the Resource Conservation and Recovery Act (RCRA). The procedures in this Guidance Manual are comprehensive and detailed and are designed to provide the necessary guidance for the preparation of site specific procedures. The use of these procedures is intended to provide the necessary sensitivity, specificity, precision, and comparability of analyses and test results. The solutions to achieving specific program objectives will depend upon facility constraints, compliance with DOE Orders and DOE facilities' operating contractor requirements, and the knowledge and experience of the TRU waste handlers and analysts. With some analytical methods, such as gas chromatography/mass spectrometry, the Guidance Manual procedures may be used directly. With other methods, such as nondestructive/destructive characterization, the Guidance Manual provides guidance rather than a step-by-step procedure.

  18. XTAL system of crystallographic programs: programmer's manual

    SciTech Connect

    Hall, S.R.; Stewart, J.M.; Norden, A.P.; Munn, R.J.; Freer, S.T.

    1980-02-01

    This document establishes the basis for collaborative writing of transportable computer programs for x-ray crystallography. The concepts and general-purpose utility subroutines described here can be readily adapted to other scientific calculations. The complete system of crystallographic programs and subroutines is called XTAL and replaces the XRAY (6,7,8) system of programs. The coding language for the XTAL system is RATMAC (5). The XTAL system of programs contains routines for controlling execution of application programs. In this sense it forms a suboperating system that presents the same computational environment to the user and programmer irrespective of the operating system in use at a particular installation. These control routines replace all FORTRAN I/O code, supply character reading and writing, supply binary file reading and writing, serve as a support library for applications programs, and provide for interprogram communication.

  19. Users manual for flight control design programs

    NASA Technical Reports Server (NTRS)

    Nalbandian, J. Y.

    1975-01-01

    Computer programs for the design of analog and digital flight control systems are documented. The program DIGADAPT uses linear-quadratic-gaussian synthesis algorithms in the design of command response controllers and state estimators, and it applies covariance propagation analysis to the selection of sampling intervals for digital systems. Program SCHED executes correlation and regression analyses for the development of gain and trim schedules to be used in open-loop explicit-adaptive control laws. A linear-time-varying simulation of aircraft motions is provided by the program TVHIS, which includes guidance and control logic, as well as models for control actuator dynamics. The programs are coded in FORTRAN and are compiled and executed on both IBM and CDC computers.

  20. Manual for Program PSTRESS: Peel stress computation

    NASA Technical Reports Server (NTRS)

    Barkey, Derek A.; Madan, Ram C.

    1987-01-01

    Described is the use of the interactive FORTRAN computer program PSTRESS, which computes a closed form solution for two bonded plates subjected to applied moments, vertical shears, and in-plane forces. The program calculates in-plane stresses in the plates, deflections of the plates, and peel and shear stresses in the adhesive. The document briefly outlines the analytical method used by PSTRESS, describes the input and output of the program, and presents a sample analysis. The results of the latter are shown to be within a few percent of results obtained using a NASTRAN finite element analysis. An appendix containing a listing of PSTRESS is included.

  1. A Two-Year Report on the Experimental Freshman Year Program. Chapter I, Introduction.

    ERIC Educational Resources Information Center

    Kibler, Robert J., Ed.

    This chapter is published as the introduction to a six-chapter interim report on an experimental program at Southern Illinois University. 275 graduating high school seniors in the bottom one-third of their class were identified as high potential low achievers and admitted into the University to participate as experimental and control subjects in a…

  2. The Federal Administration of Evaluation Program Improvement and Technical Assistance under ECIA Chapter 1.

    ERIC Educational Resources Information Center

    Reisner, Elizabeth R.; Marks, Ellen L.

    This document examines the following aspects of the federal administration of evaluation, program improvement, and technical assistance under Chapter 1 of the Education Consolidation and Improvement Act: (1) changes in each of the three areas since 1981 when Chapter 1 replaced Title I of the Elementary and Secondary Education Act; (2) activities…

  3. 15 CFR Appendix A to Chapter Xx - Administration of the Trade Agreements Program

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 3 2014-01-01 2014-01-01 false Administration of the Trade Agreements Program A Appendix A to Chapter XX Commerce and Foreign Trade Regulations Relating to Foreign Trade Agreements OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE Ch. XX, App. A Appendix A to Chapter...

  4. 15 CFR Appendix A to Chapter Xx - Administration of the Trade Agreements Program

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 3 2011-01-01 2011-01-01 false Administration of the Trade Agreements Program A Appendix A to Chapter XX Commerce and Foreign Trade Regulations Relating to Foreign Trade Agreements OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE Ch. XX, App. A Appendix A to Chapter...

  5. 15 CFR Appendix A to Chapter Xx - Administration of the Trade Agreements Program

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 3 2012-01-01 2012-01-01 false Administration of the Trade Agreements Program A Appendix A to Chapter XX Commerce and Foreign Trade Regulations Relating to Foreign Trade Agreements OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE Ch. XX, App. A Appendix A to Chapter...

  6. 15 CFR Appendix A to Chapter Xx - Administration of the Trade Agreements Program

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 3 2013-01-01 2013-01-01 false Administration of the Trade Agreements Program A Appendix A to Chapter XX Commerce and Foreign Trade Regulations Relating to Foreign Trade Agreements OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE Ch. XX, App. A Appendix A to Chapter...

  7. 15 CFR Appendix A to Chapter Xx - Administration of the Trade Agreements Program

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Administration of the Trade Agreements Program A Appendix A to Chapter XX Commerce and Foreign Trade Regulations Relating to Foreign Trade Agreements OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE Ch. XX, App. A Appendix A to Chapter...

  8. Cost-Effectiveness Predictors in Chapter 1 Programs: The Minnesota Example.

    ERIC Educational Resources Information Center

    Fitzgerald, Nicholas B.; Hunt, Rodney K.

    Reductions in the funding of compensatory education along with observed discrepancies in per-pupil cost among equally effective schools created a compelling case for the study of the determinants of cost-effective Chapter 1 programs in the state of Minnesota. Cost-effectiveness (CE) indexes for Chapter 1 reading and math services reflected a ratio…

  9. Marketing Your Adult Literacy Program. A "How to" Manual.

    ERIC Educational Resources Information Center

    Smith, Barbara; And Others

    This guide, which was originally developed for use in a training workshop, is intended to assist adult educators in learning to market their adult literacy programs. The first chapter outlines the main principles of social marketing and public relations. An overview of the operation of a social marketing campaign on adult literacy is provided…

  10. Real-Time Multiprocessor Programming Language (RTMPL) user's manual

    NASA Technical Reports Server (NTRS)

    Arpasi, D. J.

    1985-01-01

    A real-time multiprocessor programming language (RTMPL) has been developed to provide for high-order programming of real-time simulations on systems of distributed computers. RTMPL is a structured, engineering-oriented language. The RTMPL utility supports a variety of multiprocessor configurations and types by generating assembly language programs according to user-specified targeting information. Many programming functions are assumed by the utility (e.g., data transfer and scaling) to reduce the programming chore. This manual describes RTMPL from a user's viewpoint. Source generation, applications, utility operation, and utility output are detailed. An example simulation is generated to illustrate many RTMPL features.

  11. Users manual for the IMA program

    NASA Technical Reports Server (NTRS)

    Williams, D. F.

    1991-01-01

    The Impulsive Mission Analysis (IMA) computer program provides a user-friendly means of designing a complete Earth-orbital mission profile using an 80386-based microcomputer. The IMA program produces a trajectory summary, an output file for use by the new Simplex Computation of Optimum Orbital Trajectories (SCOOT) program, and several graphics, including ground tracks on a world map, altitude profiles, relative motion plots, and sunlight/communication timelines. The user can design missions using any combination of three basic types of mission segments: double co-eliptic rendezvous, payload delivery, and payload de-orbit/spacecraft recovery. Each mission segment is divided into one or more transfers, and each transfer is divided into one or more legs, each leg consisting of a coast arc followed by a burn arc.

  12. Hanford inventory program user`s manual

    SciTech Connect

    Hinkelman, K.C.

    1994-09-12

    Provides users with instructions and information about accessing and operating the Hanford Inventory Program (HIP) system. The Hanford Inventory Program is an integrated control system that provides a single source for the management and control of equipment, parts, and material warehoused by Westinghouse Hanford Company in various site-wide locations. The inventory is comprised of spare parts and equipment, shop stock, special tools, essential materials, and convenience storage items. The HIP replaced the following systems; ACA, ASP, PICS, FSP, WSR, STP, and RBO. In addition, HIP manages the catalog maintenance function for the General Supplies inventory stocked in the 1164 building and managed by WIMS.

  13. America-Israel Young Ambassadors Student Exchange Program. Orientation Manual.

    ERIC Educational Resources Information Center

    Neeson, Eileen; And Others

    This orientation manual for the America-Israel Young Ambassadors Student Exchange Program is written for the exchange of high school students between these two countries. The goal is to familiarize American students with the history, politics, economy, religions and society of Israel. Thirteen training sessions are suggested on the following…

  14. 45 CFR 205.70 - Availability of agency program manuals.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... (AABD) of the Social Security Act must provide that: (a) Program manuals and other policy issuances.... Wide availability of agency policy materials is recommended. (c) Upon request, the agency will reproduce without charge or at a charge related to the cost of reproduction the specific policy...

  15. 45 CFR 205.70 - Availability of agency program manuals.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... (AABD) of the Social Security Act must provide that: (a) Program manuals and other policy issuances.... Wide availability of agency policy materials is recommended. (c) Upon request, the agency will reproduce without charge or at a charge related to the cost of reproduction the specific policy...

  16. Highway Safety Program Manual: Volume 2: Motor Vehicle Registration.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 2 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) describes the purposes and specific objectives of motor vehicle registration. Federal authority for vehicle registration and general policies regarding vehicle registration systems are outlined.…

  17. Region 8 radiological assistance program team response manual

    SciTech Connect

    Webb, D.E.

    1997-04-15

    The purpose of this manual is to provide guidance so that a request for radiological assistance is responded to in an effective and consistent manner. These procedures are specific to the trained and qualified members of the Region 8 Radiological Assistance Program (RAP) team. Procedures provide steps for responding to the request, notification and activation of the team members, position descriptions, and checklists.

  18. A Teachers' Manual to Accompany the Oral Language Program.

    ERIC Educational Resources Information Center

    Reeback, Robert T.

    This document is the teachers' manual for use with the Oral Language Program, a 1-year set ot daily lessons of roughly 25 minutes each designed to help five- to seven-year-old children who do not speak English, or who speak dialects of English that offer significant structural competition with the standard dialects, to become proficient speakers…

  19. Management Skills for Alcohol Program Administrators; Trainer Manual.

    ERIC Educational Resources Information Center

    National Center for Alcohol Education, Arlington, VA.

    This trainer's manual contains complete instructions and resource references for delivering the management skills program designed to upgrade the skills and performance of managerial personnel in the alcoholism field. It provides four areas of information: (1) course content and methodology, target audience, assumptions and suggestions; (2)…

  20. PACT: Parents and Children Together. Program Manual.

    ERIC Educational Resources Information Center

    Whitney, Loralyn; Hager, Elizabeth A.

    The Parent and Children Together (PACT) project, developed by the Arkansas Valley and High Plain Regional Library Services in Colorado, is aimed at promoting lifelong interest in reading among today's children. PACT services include: (1) sponsoring workshops that will train librarians and volunteers to plan and present parents' programs; (2)…

  1. The RSZ BASIC programming language manual

    NASA Technical Reports Server (NTRS)

    Stattel, R. J.; Niswander, J. K.; Kochhar, A. K.

    1980-01-01

    The RSZ BASIC interactive language is described. The RSZ BASIC interpreter is resident in the Telemetry Data Processor, a system dedicated to the processing and displaying of PCM telemetry data. A series of working examples teaches the fundamentals of RSZ BASIC and shows how to construct, edit, and manage storage of programs.

  2. LESSONS LEARNED AND BEST PRACTICES PROGRAM MANUAL

    SciTech Connect

    Gravois, Melanie C.

    2007-05-24

    This document provides requirements and guidelines for conducting a Lessons Learned and Best Practices Program within Lawrence Berkeley National Laboratory (LBNL) to ensure ongoing improvement of safety and reliability, prevent the recurrence of significant adverse events/trends, and determine implementation strategies that will help LBNL successfully meet the missions and goals set forth by the Department of Energy (DOE).

  3. The WRITEACOURSE Language: Programming Manual. Revised Edition.

    ERIC Educational Resources Information Center

    Zosel, Mary; And Others

    WRITEACOURSE is a programing language for man-computer interactions. It was originally designed for writing computer assisted instruction courses, but it can also be used to control a remote terminal in a variety of applications which involve display and editing of characters. It is not suited for applications which use the computer as an…

  4. Chapter 3: The value of individual EERE programs

    SciTech Connect

    None, None

    2009-01-18

    Document summarizes the results of the benefits analysis of EERE’s programs, as described in the FY 2008 Budget Request. EERE estimates benefits for its overall portfolio and nine Research, Development, Demonstration, and Deployment (RD3) programs.

  5. User's manual for computer program BASEPLOT

    USGS Publications Warehouse

    Sanders, Curtis L.

    2002-01-01

    The checking and reviewing of daily records of streamflow within the U.S. Geological Survey is traditionally accomplished by hand-plotting and mentally collating tables of data. The process is time consuming, difficult to standardize, and subject to errors in computation, data entry, and logic. In addition, the presentation of flow data on the internet requires more timely and accurate computation of daily flow records. BASEPLOT was developed for checking and review of primary streamflow records within the U.S. Geological Survey. Use of BASEPLOT enables users to (1) provide efficiencies during the record checking and review process, (2) improve quality control, (3) achieve uniformity of checking and review techniques of simple stage-discharge relations, and (4) provide a tool for teaching streamflow computation techniques. The BASEPLOT program produces tables of quality control checks and produces plots of rating curves and discharge measurements; variable shift (V-shift) diagrams; and V-shifts converted to stage-discharge plots, using data stored in the U.S. Geological Survey Automatic Data Processing System database. In addition, the program plots unit-value hydrographs that show unit-value stages, shifts, and datum corrections; input shifts, datum corrections, and effective dates; discharge measurements; effective dates for rating tables; and numeric quality control checks. Checklist/tutorial forms are provided for reviewers to ensure completeness of review and standardize the review process. The program was written for the U.S. Geological Survey SUN computer using the Statistical Analysis System (SAS) software produced by SAS Institute, Incorporated.

  6. Crew appliance computer program manual, volume 1

    NASA Technical Reports Server (NTRS)

    Russell, D. J.

    1975-01-01

    Trade studies of numerous appliance concepts for advanced spacecraft galley, personal hygiene, housekeeping, and other areas were made to determine which best satisfy the space shuttle orbiter and modular space station mission requirements. Analytical models of selected appliance concepts not currently included in the G-189A Generalized Environmental/Thermal Control and Life Support Systems (ETCLSS) Computer Program subroutine library were developed. The new appliance subroutines are given along with complete analytical model descriptions, solution methods, user's input instructions, and validation run results. The appliance components modeled were integrated with G-189A ETCLSS models for shuttle orbiter and modular space station, and results from computer runs of these systems are presented.

  7. Synfuel program analysis. Volume 2: VENVAL users manual

    NASA Astrophysics Data System (ADS)

    Muddiman, J. B.; Whelan, J. W.

    1980-07-01

    This volume is intended for program analysts and is a users manual for the VENVAL model. It contains specific explanations as to input data requirements and programming procedures for the use of this model. VENVAL is a generalized computer program to aid in evaluation of prospective private sector production ventures. The program can project interrelated values of installed capacity, production, sales revenue, operating costs, depreciation, investment, dent, earnings, taxes, return on investment, depletion, and cash flow measures. It can also compute related public sector and other external costs and revenues if unit costs are furnished.

  8. User's Manual for FSLIP-3, FLEXSTAB Loads Integration Program

    NASA Technical Reports Server (NTRS)

    Sims, R. L.

    1981-01-01

    The FSLIP program documentation and user's manual is presented. As a follow on program to the FLEXSTAB computer analysis system, the primary function of this FORTRAN IV program is to integrate panel pressure coefficients computed by FLEXSTAB to obtain total shear, bending, and torque airloads on various surfaces, summed relative to user specified axes. The program essentially replaces the ALOADS module in FLEXSTAB with expanded capabilities and flexibility. As such, FSLIP is generalized to work on any FLEXSTAB model or other pressure data if in a compatible format.

  9. "Rock 'n' Read." 1994 Summer Library Program Manual. Bulletin No. 4910.

    ERIC Educational Resources Information Center

    Roeber, Jane A., Ed.

    This manual was designed to help Wisconsin librarians plan their 1994 summer library program based on the theme: "Rock 'n' Read." The ideas in the manual were contributed by Wisconsin librarians and were culled from recent program manuals in other states. Part 1, "Planning and Promoting Programs," examines the planning aspects of programming,…

  10. Evaluation of the 1983-84 ECIA, Chapter II Program Development for the Artistically Talented Project.

    ERIC Educational Resources Information Center

    Goldinher, Martin R.

    The Program Development for Artistically Talented Project (ATP) in the Dade County Schools, Florida, funded by the Education Consolidation Improvement Act, Chapter 2, was designed to provide technical support to the locally funded program for artistically talented elementary students through: (1) the development of a curriculum/program guide; and…

  11. Improving Chapter 1 through Parents: A Family Goal Program.

    ERIC Educational Resources Information Center

    Yap, Kim Onn

    The impact of a parent-school partnership program on elementary school children's reading achievement and attitudes is being evaluated over five years. The program involves the parents in children's reading activities and allows them to influence their children's attitudes toward school achievement. Participating parents agree to support seven…

  12. FDA (Food and Drug Administration) compliance program guidance manual and updates (FY 86). Section 4. Medical and radiological devices. Irregular report

    SciTech Connect

    Not Available

    1986-01-01

    The FDA Compliance Program Guidance Manual provides a system for issuing and filing program plans and instructions directed to Food and Drug Administration Field operations for project implementation. Section IV provides those chapters of the Compliance Program Guidance Manual which pertain to the areas of medical and radiological devices. Some of the areas of coverage include laser and sunlamp standards inspections, compliance testing of various radiation-emitting products such as television receivers and microwave ovens, emergency response planning and policy, premarket approval and device manufacturers inspections, device problem reporting, sterilization of devices, and consumer education programs on medical and radiological devices.

  13. 38 CFR 21.5900 - Administration of benefits program-chapter 107, title 10 U.S.C.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... benefits program-chapter 107, title 10 U.S.C. 21.5900 Section 21.5900 Pensions, Bonuses, and Veterans... Assistance Test Program Administrative § 21.5900 Administration of benefits program—chapter 107, title 10 U.S.C. In administering benefits payable under Chapter 107, Title 10 U.S.C, VA will be bound by...

  14. Books and Pets: Our Friends for Life! Arizona Reading Program Manual.

    ERIC Educational Resources Information Center

    Arizona State Dept. of Library, Archives and Public Records, Phoenix.

    This reading program manual delineates the "Books and Pets" program, a project of Arizona Reads, which is a collaboration between the Arizona Humanities Council and the Arizona State Library, Archives, and Public Records. A CD-ROM version of the program accompanies the manual. The manual is divided into the following parts: Introduction; Getting…

  15. Cuerpo de Paz Manual de Sistema de Programacion y Capacitacion (Peace Corps Programming and Training System Manual): T0063.

    ERIC Educational Resources Information Center

    Peace Corps, Washington, DC.

    This Spanish version of the Peace Corps Programming and Training System Manual is designed to help field staff members of the Peace Corps train volunteers. Its task descriptions, guidelines, examples, and definitions are intended to be practical and informative rather than restrictive. The manual is divided into six major sections: (1)…

  16. A Two-Year Report on the Experimental Freshman Year Program. Chapter IV, Results.

    ERIC Educational Resources Information Center

    Kibler, Robert J., Ed.

    Chapter IV describes the interim findings of an experimental program for underachieving high school graduates during their freshman year at Southern Illinois University. The statistically analyzed data are presented and discussed under four headings--(1) Subjects' occupation or whereabouts in the year following their participation in the program,…

  17. Evaluation of the Fiscal 1989 Education Consolidation and Improvement Act (ECIA) Chapter 1 Program.

    ERIC Educational Resources Information Center

    Kimbrough, Ted D.

    This report evaluates the Education Consolidation and Improvement Act (ECIA) Chapter 1 program in the Chicago (Illinois) Public Schools for 1988-89. The purpose of the program was to serve the most educationally needy students residing in eligible school attendance areas through supplementary and categorical activities. Services were scheduled in…

  18. A Description and Evaluation of Chapter 3, State Compensatory Education Programs in Michigan, 1973-1974.

    ERIC Educational Resources Information Center

    Michigan State Dept. of Education, Lansing. Research, Evaluation, and Assessment Services.

    Chapter 3 of the State School Aid Act was enacted to improve achievement in the basic cognitive skills of low-achieving puPils in Michigan. The program provided funds and considerable program discretion for local school districts with high concentration of low achieving children in the grades K-6. These districts received funds for a three-year…

  19. Dependents' Educational Assistance Program (DEA), Chapter 25 of Title 38, U.S. Code

    ERIC Educational Resources Information Center

    US Department of Veterans Affairs, 2005

    2005-01-01

    This pamphlet provides a general description of the Dependents' Educational Assistance program, or DEA (chapter 35 of title 38, U. S. Code). The DEA program provides education and training opportunities to eligible dependents and survivors of certain veterans. It covers the main questions prospective participants may have about DEA benefits,…

  20. CONMIN: A FORTRAN program for constrained function minimization: User's manual

    NASA Technical Reports Server (NTRS)

    Vanderplaats, G. N.

    1973-01-01

    CONMIN is a FORTRAN program, in subroutine form, for the solution of linear or nonlinear constrained optimization problems. The basic optimization algorithm is the Method of Feasible Directions. The user must provide a main calling program and an external routine to evaluate the objective and constraint functions and to provide gradient information. If analytic gradients of the objective or constraint functions are not available, this information is calculated by finite difference. While the program is intended primarily for efficient solution of constrained problems, unconstrained function minimization problems may also be solved, and the conjugate direction method of Fletcher and Reeves is used for this purpose. This manual describes the use of CONMIN and defines all necessary parameters. Sufficient information is provided so that the program can be used without special knowledge of optimization techniques. Sample problems are included to help the user become familiar with CONMIN and to make the program operational.

  1. The Bermuda Bio-Optics Program (BBOP). Chapter 16

    NASA Technical Reports Server (NTRS)

    Siegel, David A.

    2001-01-01

    The Bermuda Bio-Optics Project (BBOP) is a collaborative effort between the Institute for Computational Earth System Science (ICESS) at the University of California at Santa Barbara (UCSB) and the Bermuda Biological Station for Research (BBSR). This research program is designed to characterize light availability and utilization in the Sargasso Sea, and to provide an optical link by which biogeochemical observations may be used to evaluate bio-optical models for pigment concentration, primary production, and sinking particle fluxes from satellite-based ocean color sensors. The BBOP time-series was initiated in 1992, and is carried out in conjunction with the US JGOFS Bermuda Atlantic Time-series Study (BATS) at the Bermuda Biological Station for Research. The BATS program itself has been observing biogeochemical processes (primary productivity, particle flux at and elemental cycles) in the mesotrophic waters of the Sargasso Sea since 1988. Closely affiliated with BBOP and BATS is a separate NASA-funded study of the spatial variability of biogeochemical processes in the Sargasso Sea using high-resolution Advanced Very High Resolution Radiometer (AVHRR) and Sea-Viewing Wide Field-of-view Sensor (SeaWiFS) data collected at Bermuda. The collaboration between BATS and BBOP measurements has resulted in a unique data set that addresses not only the SIMBIOS goals but also the broader issues of important factors controlling the carbon cycle.

  2. An Overview of SIMBIOS Program Activities and Accomplishments. Chapter 1

    NASA Technical Reports Server (NTRS)

    Fargion, Giulietta S.; McClain, Charles R.

    2003-01-01

    The SIMBIOS Program was conceived in 1994 as a result of a NASA management review of the agency's strategy for monitoring the bio-optical properties of the global ocean through space-based ocean color remote sensing. At that time, the NASA ocean color flight manifest included two data buy missions, the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) and Earth Observing System (EOS) Color, and three sensors, two Moderate Resolution Imaging Spectroradiometers (MODIS) and the Multi-angle Imaging Spectro-Radiometer (MISR), scheduled for flight on the EOS-Terra and EOS-Aqua satellites. The review led to a decision that the international assemblage of ocean color satellite systems provided ample redundancy to assure continuous global coverage, with no need for the EOS Color mission. At the same time, it was noted that non-trivial technical difficulties attended the challenge (and opportunity) of combining ocean color data from this array of independent satellite systems to form consistent and accurate global bio-optical time series products. Thus, it was announced at the October 1994 EOS Interdisciplinary Working Group meeting that some of the resources budgeted for EOS Color should be redirected into an intercalibration and validation program (McClain et al., 2002).

  3. Random Experiment Program Resource Impact (REPRI) program: User's manual

    NASA Technical Reports Server (NTRS)

    Pease, W. T.; Alford, R. A.

    1972-01-01

    A complete user and programmer guide for the REPRI program is presented. This program was developed to perform mission concept, subsystem capability, and experiment support compatibility studies for a space station. The program utilizes Monte Carlo techniques to randomly schedule events in discrete intervals. Resources, logistics, cost, and space station volume are considered.

  4. Environmental implementation plan: Chapter 5, Chemical management, pollution prevention and other compliance programs. Draft revision

    SciTech Connect

    Peterson, G.L.

    1993-11-18

    Compliance with environmental regulations and US Department of Energy Orders (DOE) relating to environmental protection is an important part of SRS`s program. Over the past few years, the number of environmental regulations has increased. The strategy to comply with new and existing environmental regulations and DOE orders is described in chapter two. In this chapter, the following environmental programs are described: Toxic Substances Control Act (TSCA); Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA); Emergency Planning and Community Right-to-Know Act (EPCRA); and SPCC/BMP/Pollution Prevention Plans;The implementation section identifies issues and those responsible to achieve defined objectives.

  5. Modeling of rolling element bearing mechanics. Computer program user's manual

    NASA Astrophysics Data System (ADS)

    Greenhill, Lyn M.; Merchant, David H.

    1994-10-01

    This report provides the user's manual for the Rolling Element Bearing Analysis System (REBANS) analysis code which determines the quasistatic response to external loads or displacement of three types of high-speed rolling element bearings: angular contact ball bearings, duplex angular contact ball bearings, and cylindrical roller bearings. The model includes the defects of bearing ring and support structure flexibility. It is comprised of two main programs: the Preprocessor for Bearing Analysis (PREBAN) which creates the input files for the main analysis program, and Flexibility Enhanced Rolling Element Bearing Analysis (FEREBA), the main analysis program. This report addresses input instructions for and features of the computer codes. A companion report addresses the theoretical basis for the computer codes. REBANS extends the capabilities of the SHABERTH (Shaft and Bearing Thermal Analysis) code to include race and housing flexibility, including such effects as dead band and preload springs.

  6. Modeling of rolling element bearing mechanics. Computer program user's manual

    NASA Technical Reports Server (NTRS)

    Greenhill, Lyn M.; Merchant, David H.

    1994-01-01

    This report provides the user's manual for the Rolling Element Bearing Analysis System (REBANS) analysis code which determines the quasistatic response to external loads or displacement of three types of high-speed rolling element bearings: angular contact ball bearings, duplex angular contact ball bearings, and cylindrical roller bearings. The model includes the defects of bearing ring and support structure flexibility. It is comprised of two main programs: the Preprocessor for Bearing Analysis (PREBAN) which creates the input files for the main analysis program, and Flexibility Enhanced Rolling Element Bearing Analysis (FEREBA), the main analysis program. This report addresses input instructions for and features of the computer codes. A companion report addresses the theoretical basis for the computer codes. REBANS extends the capabilities of the SHABERTH (Shaft and Bearing Thermal Analysis) code to include race and housing flexibility, including such effects as dead band and preload springs.

  7. Biosafety Manual

    SciTech Connect

    King, Bruce W.

    2010-05-18

    Work with or potential exposure to biological materials in the course of performing research or other work activities at Lawrence Berkeley National Laboratory (LBNL) must be conducted in a safe, ethical, environmentally sound, and compliant manner. Work must be conducted in accordance with established biosafety standards, the principles and functions of Integrated Safety Management (ISM), this Biosafety Manual, Chapter 26 (Biosafety) of the Health and Safety Manual (PUB-3000), and applicable standards and LBNL policies. The purpose of the Biosafety Program is to protect workers, the public, agriculture, and the environment from exposure to biological agents or materials that may cause disease or other detrimental effects in humans, animals, or plants. This manual provides workers; line management; Environment, Health, and Safety (EH&S) Division staff; Institutional Biosafety Committee (IBC) members; and others with a comprehensive overview of biosafety principles, requirements from biosafety standards, and measures needed to control biological risks in work activities and facilities at LBNL.

  8. Language Development Component Chapter 1 Reading Program 1993-94. Final Evaluation Report. Elementary and Secondary Education Act--Chapter 1.

    ERIC Educational Resources Information Center

    Lore, Rosemary; Chamberlain, Edward

    A study evaluated the Chapter 1 Reading Program that served 5,946 underachieving pupils in grades 1 through 8 in the Columbus, Ohio, public schools. These children appeared unlikely to learn to read successfully without additional reading instruction. The program featured small group instruction each day for 40-45 minutes on reading and writing…

  9. Program manual for the Eppler airfoil inversion program

    NASA Technical Reports Server (NTRS)

    Thomson, W. G.

    1975-01-01

    A computer program is described for calculating the profile of an airfoil as well as the boundary layer momentum thickness and energy form parameter. The theory underlying the airfoil inversion technique developed by Eppler is discussed.

  10. A.C.T.I.V.E. Teacher Resource Manual: State and National Sources and Services.

    ERIC Educational Resources Information Center

    Vodola, Thomas M.

    Intended for teachers, the resource manual presents information on a nationally validated Title III adapted physical education program. An introductory chapter provides an overview of the manual, an explanation of the manual's organization and structure, and definitions. Chapter II describes Project ACTIVE's (All Children Totally Involved…

  11. A Two-Year Report on the Experimental Freshman Year Program. Chapter III, Procedures.

    ERIC Educational Resources Information Center

    Kibler, Robert J., Ed.

    This chapter outlines the procedures followed in an experimental program for low-achievers during their freshman year at Southern Illinois University. Specifically described are the experimental design, selection of subjects, and the treatment according to the experimental, control, and norm groups. In addition, the sample group is described in…

  12. Evaluation of Chapter I Take-Home Computer Program. Report No. 7, Vol. 25.

    ERIC Educational Resources Information Center

    Fraser, Lowrie A.

    The Chapter I Take-Home Computer (THC) program was established in nine elementary and eight middle schools in Atlanta (Georgia) in the 1989-90 school year. One hundred and eighty computers were sent home with 422 students, whose parents were willing to work with the students, for 6-week periods. Log sheets were kept by each child regarding the…

  13. Implementing a Portfolio Assessment System for Chapter 1 Program Improvement: A Case Study.

    ERIC Educational Resources Information Center

    Leitner, David; Trevisan, Mike

    This paper presents findings of a case study that documented the implementation of a portfolio assessment system in response to mandated program improvement and assessed its impact on teacher and student behaviors. The sample included elementary and middle school teachers and students from three Chapter 1 schools in a rural California school…

  14. A Study of Magnet Schools and the Chapter 1 Program for Disadvantaged Students. Revised.

    ERIC Educational Resources Information Center

    Funkhouser, Janie E.; Moore, Mary T.

    Because magnet schools restructure school and district attendance area boundaries in order to achieve racial heterogeneity, they attempt to disassemble the very unit towards which the Education Consolidation and Improvement Act Chapter 1 program targets its resources--neighborhood schools attended by poor children. A nine-district survey of the…

  15. Program manual for ASTOP, an Arbitrary space trajectory optimization program

    NASA Technical Reports Server (NTRS)

    Horsewood, J. L.

    1974-01-01

    The ASTOP program (an Arbitrary Space Trajectory Optimization Program) designed to generate optimum low-thrust trajectories in an N-body field while satisfying selected hardware and operational constraints is presented. The trajectory is divided into a number of segments or arcs over which the control is held constant. This constant control over each arc is optimized using a parameter optimization scheme based on gradient techniques. A modified Encke formulation of the equations of motion is employed. The program provides a wide range of constraint, end conditions, and performance index options. The basic approach is conducive to future expansion of features such as the incorporation of new constraints and the addition of new end conditions.

  16. Pesticide Applicator Training Manual, Category 2 - Forest Pest Control. A Training Program for the Certification of Commercial Pesticide Applicators.

    ERIC Educational Resources Information Center

    Sinclair, W. A., Comp.

    This manual provides information needed to meet specific standards for certification as a pesticide applicator. Each of the eight chapters deals with a different aspect of pesticide use. Chapter one discusses the problems of use as it relates to safety of humans and the environment. Chapter two is concerned with the identification and diagnosis of…

  17. Pesticide Applicator Training Manual, Category 1 - Agricultural, Subcategory - Plant. A Training Program for the Certification of Commercial Pesticide Applicators.

    ERIC Educational Resources Information Center

    Dewey, J. E., Ed.; Pendleton, R. F., Ed.

    This manual provides information needed to meet specific standards for certification as a pesticide applicator. Each of the eight chapters deals with a different aspect of pesticide use. Chapter one discusses the problems of use, particularly those associated with safety. Chapter two is concerned with the identification and diagnosis of insects…

  18. Montana Rivers Information System : Edit/Entry Program User's Manual.

    SciTech Connect

    United States. Bonneville Power Administration; Montana Department of Fish, Wildlife and Parks

    1992-07-01

    The Montana Rivers Information System (MRIS) was initiated to assess the state`s fish, wildlife, and recreation value; and natural cultural, and geologic features. The MRIS is now a set of data bases containing part of the information in the Natural Heritage Program natural features and threatened and endangered species data bases and comprises of the Montana Interagency Stream Fisheries Database; the MDFWP Recreation Database; and the MDFWP Wildlife Geographic Information System. The purpose of this User`s Manual is to describe to the user how to maintain the MRIS database of their choice by updating, changing, deleting, and adding records using the edit/entry programs; and to provide to the user all information and instructions necessary to complete data entry into the MRIS databases.

  19. Program manual for the Shuttle Electric Power System analysis computer program (SEPS), volume 1 of program documentation

    NASA Technical Reports Server (NTRS)

    Bains, R. W.; Herwig, H. A.; Luedeman, J. K.; Torina, E. M.

    1974-01-01

    The Shuttle Electric Power System (SEPS) computer program is considered in terms of the program manual, programmer guide, and program utilization. The main objective is to provide the information necessary to interpret and use the routines comprising the SEPS program. Subroutine descriptions including the name, purpose, method, variable definitions, and logic flow are presented.

  20. Mathematics 8 and 9: Teacher Resource Manual. Curriculum, Interim 1989.

    ERIC Educational Resources Information Center

    Dawson, Jon, Ed.

    This teacher resource manual has been developed to assist classroom teachers in implementing the Integrated Occupational Mathematics program for grades 8 and 9. The first chapter of this manual gives an introduction including resources and scope/sequence. The next two chapters describe the overviews and instructional strategies of the grade 8 and…

  1. Program for Infant/Toddler Caregivers. Trainer's Manual, Module II: Group Care.

    ERIC Educational Resources Information Center

    Signer, Sheila M., Ed.; And Others

    This trainer's manual covers module II of the Program for Infant/Toddler Caregivers (PITC), a four-module video training course for providers of family and center day care. The manual is intended to be used by module instructors and includes an overview of the PITC and instructions for using the manual and its accompanying videos. The module…

  2. Program for Infant/Toddler Caregivers. Trainer's Manual, Module III: Learning and Development.

    ERIC Educational Resources Information Center

    Signer, Sheila M., Ed.; Wright, Sylvia Stein, Ed.

    This trainer's manual covers module III of the Program for Infant/Toddler Caregivers (PITC), a four-module video training course for providers of family and center day care. The manual is intended to be used by module instructors and includes an overview of the PITC and instructions for using the manual and its accompanying videos. The module…

  3. User's manual for rocket combustor interactive design (ROCCID) and analysis computer program. Volume 1: User's manual

    NASA Technical Reports Server (NTRS)

    Muss, J. A.; Nguyen, T. V.; Johnson, C. W.

    1991-01-01

    The user's manual for the rocket combustor interactive design (ROCCID) computer program is presented. The program, written in Fortran 77, provides a standardized methodology using state of the art codes and procedures for the analysis of a liquid rocket engine combustor's steady state combustion performance and combustion stability. The ROCCID is currently capable of analyzing mixed element injector patterns containing impinging like doublet or unlike triplet, showerhead, shear coaxial, and swirl coaxial elements as long as only one element type exists in each injector core, baffle, or barrier zone. Real propellant properties of oxygen, hydrogen, methane, propane, and RP-1 are included in ROCCID. The properties of other propellants can easily be added. The analysis model in ROCCID can account for the influence of acoustic cavities, helmholtz resonators, and radial thrust chamber baffles on combustion stability. ROCCID also contains the logic to interactively create a combustor design which meets input performance and stability goals. A preliminary design results from the application of historical correlations to the input design requirements. The steady state performance and combustion stability of this design is evaluated using the analysis models, and ROCCID guides the user as to the design changes required to satisfy the user's performance and stability goals, including the design of stability aids. Output from ROCCID includes a formatted input file for the standardized JANNAF engine performance prediction procedure.

  4. Timeline Resource Analysis Program (TRAP): User's manual and program document

    NASA Technical Reports Server (NTRS)

    Sessler, J. G.

    1981-01-01

    The Timeline Resource Analysis Program (TRAP), developed for scheduling and timelining problems, is described. Given an activity network, TRAP generates timeline plots, resource histograms, and tabular summaries of the network, schedules, and resource levels. It is written in ANSI FORTRAN for the Honeywell SIGMA 5 computer and operates in the interactive mode using the TEKTRONIX 4014-1 graphics terminal. The input network file may be a standard SIGMA 5 file or one generated using the Interactive Graphics Design System. The timeline plots can be displayed in two orderings: according to the sequence in which the tasks were read on input, and a waterfall sequence in which the tasks are ordered by start time. The input order is especially meaningful when the network consists of several interacting subnetworks. The waterfall sequence is helpful in assessing the project status at any point in time.

  5. Method of fan sound mode structure determination computer program user's manual: Microphone location program

    NASA Technical Reports Server (NTRS)

    Pickett, G. F.; Wells, R. A.; Love, R. A.

    1977-01-01

    A computer user's manual describing the operation and the essential features of the microphone location program is presented. The Microphone Location Program determines microphone locations that ensure accurate and stable results from the equation system used to calculate modal structures. As part of the computational procedure for the Microphone Location Program, a first-order measure of the stability of the equation system was indicated by a matrix 'conditioning' number.

  6. Generations: A Co-Located Intergenerational Day Care Program. Replication Manual.

    ERIC Educational Resources Information Center

    Ward, Christopher R.; And Others

    This manual describes the procedures for planning and implementing a co-located or shared-site intergenerational day care program, based on the experiences of the Generations program in Columbus, Ohio. Part 1 of the manual defines co-located or shared site programs, provides a rationale for providing co-located child day care and adult day…

  7. Transitional Services. Validation Manual for Exemplary Programs and Practices. Regional Rehabilitation Exchange.

    ERIC Educational Resources Information Center

    Southwest Educational Development Lab., Austin, TX.

    This manual was prepared by the Regional Rehabilitation Exchange (RRX) project to assist rehabilitation and independent living organizations and programs in submitting information to gain recognition as an exemplary program model for transitional services. The manual is intended for programs and organizations in Arkansas, Louisiana, New Mexico,…

  8. Manual for Replication of the Mother-Child Home Program. (Preliminary Version, for Field-Testing).

    ERIC Educational Resources Information Center

    Levenstein, Phyllis; And Others

    Information to assist local institutions in operating Mother-Child Programs i s provided in this manual as part of the Verbal Interaction Project. Following an introduction, the manual discusses the following topics: (1) Ingredients and Procedures of a Mother-Child Program, (2) Major Program Components, (3) Administrative and Other Practical…

  9. Sandia National Laboratories, California Environmental Management System program manual.

    SciTech Connect

    Larsen, Barbara L.

    2012-03-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004and Department of Energy (DOE) Order 436.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site first received ISO 14001 certification in September 2006 and recertification in 2009. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy and Water Resource Management and Fleet Services programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups

  10. Sandia National Laboratories, California Environmental Management System Program Manual.

    SciTech Connect

    Not Available

    2009-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 450.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site received ISO 14001 certification in September 2006. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy Management and Fleet Services Environmental programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia National

  11. Sandia National Laboratories, California Environmental Management System Program Manual.

    SciTech Connect

    Larsen, Barbara L.

    2011-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004and Department of Energy (DOE) Order 450.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site received ISO 14001 certification in September 2006. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy Management and Fleet Services programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia National Laboratories, New

  12. Procedures manual for the ORNL Radiological Survey Activities (RASA) Program

    SciTech Connect

    Myrick, T.E.; Berven, B.A.; Cottrell, W.D.; Goldsmith, W.A.; Haywood, F.F.

    1987-04-01

    The portion of the radiological survey program performed by ORNL is the subject of this Procedures Manual. The RASA group of the Health and Safety Research Division (HASRD) at ORNL is responsible for the planning, conducting, and reporting of the results of radiological surveys at specified sites and associated vicinity properties. The results of these surveys are used by DOE in determining the need for and extent of remedial actions. Upon completion of the necessary remedial actions, the ORNL-RASA group or other OOS contractor may be called upon to verify the effectiveness of the remedial action. Information from these postremedial action surveys is included as part of the data base used by DOE in certifying a site for unrestricted use.

  13. Operations manual for the plasma source ion implantation economics program

    SciTech Connect

    Bibeault, M.L.; Thayer, G.R.

    1995-10-01

    Plasma Source Ion Implantation (PSII) is a surface modification technique for metal. PSIICOSTMODEL95 is an EXCEL-based program that estimates the cost for implementing a PSII system in a manufacturing setting where the number of parts to be processed is over 5,000 parts per day and the shape of each part does not change from day to day. Overall, the manufacturing process must be very well defined and should not change. This document is a self-contained manual for PSIICOSTMODEL95. It assumes the reader has some general knowledge of the technical requirements for PSII. Configuration of the PSII process versus design is used as the methodology in PSIICOSTMODEL95. The reason behind this is twofold. First, the design process cannot be programmed into a computer when the relationships between design variables are not understood. Second, the configuration methodology reduces the number of assumptions that must be programmed into our software. Misuse of results are less likely to occur if the user has fewer assumptions to understand.

  14. The Photonovel: A Tool for Development. Program and Training Journal Manual Series Number 4.

    ERIC Educational Resources Information Center

    Weaks, Daniel

    Designed as a working and teaching tool for development workers, this manual includes the step-by-step process for preparing a photonovel. Chapter 1 introduces the photonovel, a blend of comic book and motion picture that substitutes photographs for the stylized drawings. It lists its advantages and disadvantages as an educational medium and tool…

  15. Mission Analysis Program for Solar Electric Propulsion (MAPSEP). Volume 3: Program manual for earth orbital MAPSEP

    NASA Technical Reports Server (NTRS)

    1975-01-01

    A revised user's manual for the computer program MAPSEP is presented. Major changes from the interplanetary version of MAPSEP are summarized. The changes are intended to provide a basic capability to analyze anticipated solar electric missions, and a foundation for future more complex, modifications. For Vol. III, N75-16589.

  16. Program desk manual for occupational safety and health -- U.S. Department of Energy Richland Operations, Office of Environment Safety and Health

    SciTech Connect

    Musen, L.G.

    1998-08-27

    The format of this manual is designed to make this valuable information easily accessible to the user as well as enjoyable to read. Each chapter contains common information such as Purpose, Scope, Policy and References, as well as information unique to the topic at hand. This manual can also be provided on a CD or Hanford Internet. Major topics include: Organization and program for operational safety; Occupational medicine; Construction and demolition; Material handling and storage; Hoisting and rigging; Explosives; Chemical hazards; Gas cylinders; Electrical; Boiler and pressure vessels; Industrial fire protection; Industrial hygiene; and Safety inspection checklist.

  17. Preschool Recreation Enrichment Program (PREP): Manual. Volume II. An Aid for Recreation Leaders and Instructional Personnel.

    ERIC Educational Resources Information Center

    Littman, Karen; Leslie, Lin

    Based on the Preschool Recreation Enrichment Program (PREP), the manual--one third of which consists of appendixes--is intended to assist recreation personnel in developing programs addressing the motor and associative learning needs of preschool children who demonstrate delays in motor, language, and/or socialization skills. The manual describes…

  18. Make Waves: Read! 1998 Summer Library Program Manual. Bulletin No. 98107.

    ERIC Educational Resources Information Center

    Roeber, Jane A., Ed.

    This manual is designed to help individual libraries in Wisconsin plan and implement their summer library programs. The manual is divided into six sections. Section 1 covers planning and promoting programs, and includes reproducible promotional materials, sample letters to parents, and sample media materials. Section 2 provides decorating and…

  19. 75 FR 52976 - Issuance of Revised Users' Manual for Commission Mediation Program for Investigations Under...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-30

    ... Tariff Act of 1930, as amended, 19 U.S.C. 1337 (``section 337''). 73 FR 65615 (Nov. 8, 2008). The... COMMISSION Issuance of Revised Users' Manual for Commission Mediation Program for Investigations Under...: Notice is hereby given that the Commission has issued a revised Users' Manual for its program for...

  20. Programmed Instruction Manual for a New Solar and Energy Conservation Laboratory. Final Evaluation Report.

    ERIC Educational Resources Information Center

    State Univ. of New York, Farmingdale. Agricultural and Technical Coll.

    A programmed instruction course was developed, consisting of fifteen experiments encompassing eleven separate pieces of equipment operational in a solar and energy conservation lab. The programmed instruction manual for the lab was evaluated and revised during a workshop. This evaluation indicated that both the lab and manual are valuable tools…

  1. AutoBayes Program Synthesis System Users Manual

    NASA Technical Reports Server (NTRS)

    Schumann, Johann; Jafari, Hamed; Pressburger, Tom; Denney, Ewen; Buntine, Wray; Fischer, Bernd

    2008-01-01

    Program synthesis is the systematic, automatic construction of efficient executable code from high-level declarative specifications. AutoBayes is a fully automatic program synthesis system for the statistical data analysis domain; in particular, it solves parameter estimation problems. It has seen many successful applications at NASA and is currently being used, for example, to analyze simulation results for Orion. The input to AutoBayes is a concise description of a data analysis problem composed of a parameterized statistical model and a goal that is a probability term involving parameters and input data. The output is optimized and fully documented C/C++ code computing the values for those parameters that maximize the probability term. AutoBayes can solve many subproblems symbolically rather than having to rely on numeric approximation algorithms, thus yielding effective, efficient, and compact code. Statistical analysis is faster and more reliable, because effort can be focused on model development and validation rather than manual development of solution algorithms and code.

  2. GMIS user's manual. Volume 3: training manual. Volume 4: program documentation

    SciTech Connect

    Not Available

    1984-06-01

    The purpose of the training manual is to provide step-by-step tutorials to walk the Operator through the major kinds of procedures involved in maintaining GMIS records. Annotated sample forms are provided in the Appendix of this volume to aid the Operator visually while working through the various tutorials. The Operator's Manual also serves as a reference which the Operator can use as a reminder once the tutorials have been completed.

  3. FDA compliance program guidance manual (FY 83). section VI. radiological health

    SciTech Connect

    Not Available

    1982-10-01

    The FDA Compliance Program Guidance Manual provides a system for issuing and filing written program plans and instructions directed to Food and Drug Administration field operations for project implementation.

  4. Manual on Training for Sheriffs.

    ERIC Educational Resources Information Center

    Giddings, Larry A.; And Others

    As part of a nationwide effort to professionalize the role of sheriff, this manual is designed to aid sheriffs who are in the process of planning or conducting a training program. In chapter 1 eleven specific objectives are identified for a department giving a training program: (1) to provide each deputy with the ability to function by himself;…

  5. Inorganic Analyses in Water Quality Control Programs. Training Manual.

    ERIC Educational Resources Information Center

    Office of Water Program Operations (EPA), Cincinnati, OH. National Training and Operational Technology Center.

    This document is a lecture/laboratory manual dealing with the analysis of selected inorganic pollutants. The manual is an instructional aid for classroom presentations to those with little or no experience in the field, but having one year (or equivalent) of college level inorganic chemistry and having basic laboratory skills. Topics include:…

  6. Inorganic Analyses in Water Quality Control Programs. Training Manual.

    ERIC Educational Resources Information Center

    Kroner, Audrey; And Others

    This lecture/laboratory manual for a five-day course deals with the analysis of selected inorganic pollutants. The manual is an instructional aid for classroom presentations to those with little or no experience in the field, but having one year (or equivalent) of college level inorganic chemistry, one semester of college level quantitative…

  7. Radar Ocean Wave Spectrometer (ROWS) preprocessing program (PREROWS2.EXE). User's manual and program description

    NASA Technical Reports Server (NTRS)

    Vaughn, Charles R.

    1993-01-01

    This Technical Memorandum is a user's manual with additional program documentation for the computer program PREROWS2.EXE. PREROWS2 works with data collected by an ocean wave spectrometer that uses radar (ROWS) as an active remote sensor. The original ROWS data acquisition subsystem was replaced with a PC in 1990. PREROWS2.EXE is a compiled QuickBasic 4.5 program that unpacks the recorded data, displays various variables, and provides for copying blocks of data from the original 8mm tape to a PC file.

  8. Modifications to the streamtube curvature program. Volume 1: Program modifications and user's manual. [user manuals (computer programs) for transonic flow of nacelles and intake systems of turbofan engines

    NASA Technical Reports Server (NTRS)

    Ferguson, D. R.; Keith, J. S.

    1975-01-01

    The improvements which have been incorporated in the Streamtube Curvature Program to enhance both its computational and diagnostic capabilities are described. Detailed descriptions are given of the revisions incorporated to more reliably handle the jet stream-external flow interaction at trailing edges. Also presented are the augmented boundary layer procedures and a variety of other program changes relating to program diagnostics and extended solution capabilities. An updated User's Manual, that includes information on the computer program operation, usage, and logical structure, is presented. User documentation includes an outline of the general logical flow of the program and detailed instructions for program usage and operation. From the standpoint of the programmer, the overlay structure is described. The input data, output formats, and diagnostic printouts are covered in detail and illustrated with three typical test cases.

  9. 34 CFR 364.2 - What is the purpose of the programs authorized by chapter 1 of title VII?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... SILS and CIL programs authorized by chapter 1 of title VII of the Act is to promote a philosophy of independent living (IL), including a philosophy of consumer control, peer support, self-help,...

  10. 34 CFR 364.2 - What is the purpose of the programs authorized by chapter 1 of title VII?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... SILS and CIL programs authorized by chapter 1 of title VII of the Act is to promote a philosophy of independent living (IL), including a philosophy of consumer control, peer support, self-help,...

  11. 34 CFR 364.2 - What is the purpose of the programs authorized by chapter 1 of title VII?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... SILS and CIL programs authorized by chapter 1 of title VII of the Act is to promote a philosophy of independent living (IL), including a philosophy of consumer control, peer support, self-help,...

  12. Pesticide Applicator Training Manual, Category 1 - Agricultural, Subcategory - Animal. A Training Program for the Certification of Commercial Pesticide Applicators.

    ERIC Educational Resources Information Center

    Pendleton, R. F., Ed.; Schmidtmann, E. T., Ed.

    This manual provides information needed to meet specific standards for certification as a pesticide applicator. Chapter one deals with the safety problems of pesticide use to humans, livestock and the environment. The second chapter is concerned with the types of application equipment and their utilization. Specific pests of livestock and poultry…

  13. Self-Help Construction of 1-Story Buildings. Appropriate Technologies for Development. Program & Training Journal Manual Series, Number 6.

    ERIC Educational Resources Information Center

    Gallant, Peter

    This manual is designed to assist Peace Corps field workers who have little or no construction experience in helping communities or families to construct one-story buildings. Discussed in a chapter on basic planning and design are site and position; size, shape, and floor plan; and construction materials. The next chapter is a detailed examination…

  14. Gray and Growing. Program Packages for the Older Adult. A Manual and a Supplement Manual.

    ERIC Educational Resources Information Center

    Coster, Kathy; Webb, Barbara

    Designed for presentation by library staff, activity directors, or service organization representatives, this manual and its supplement outline ways to make effective use of the materials provided or available, provide discussion and follow-up guidelines, and include directions for using film and slide projectors and cassette players. A typical…

  15. Occupational Safety and Health Program Guidelines for Colleges and Universities. An Administrative Resource Manual.

    ERIC Educational Resources Information Center

    Godbey, Frank W.; Hatch, Loren L.

    Designed as an aid for establishing and strengthening occupational safety and health programs on college and university campuses, this administrator guide is divided into four chapters. The first chapter defines and gives background information on the Occupational Safety and Health Act (OSHA). In addition, it presents a discussion of what the OSHA…

  16. Metabolic engineering of E.coli for the production of a precursor to artemisinin, an anti-malarial drug [Chapter 25 in Manual of Industrial Microbiology and Biotechnology, 3rd edition

    SciTech Connect

    Petzold, Christopher; Keasling, Jay

    2011-07-18

    This document is Chapter 25 in the Manual of Industrial Microbiology and Biotechnology, 3rd edition. Topics covered include: Incorporation of Amorpha-4,11-Diene Biosynthetic Pathway into E. coli; Amorpha-4,11-Diene Pathway Optimization; "-Omics" Analyses for Increased Amorpha-4,11-Diene Production; Biosynthetic Oxidation of Amorpha-4,11-Diene.

  17. Read To Succeed: MECCA Summer Learning Camp. Manual To Design and Deliver a Summer Bridges Program.

    ERIC Educational Resources Information Center

    Illinois State Board of Education, Springfield.

    This manual presents information on designing and delivering a summer learning program whose goal is to provide an opportunity for students to experience academic success and positive self-esteem through reading fluency and comprehension. Sections of the manual address background and policies (on student and teacher selection, student promotion,…

  18. Roadmap Through Title XX. Financing Services for Children Through Title XX and Other Programs: Manual 5.

    ERIC Educational Resources Information Center

    Copeland, William C.; Iversen, Iver A.

    This manual, part of a Hecht Institute four-manual series entitled Financing Children's Services Through Title XX and Related Programs, teaches what Title XX regulations are, what they mean, and what actions and procedures are commanded by them. The first section covers the necessity of rule systems, the characteristics of a good rule system and…

  19. Peers Helping Peers: Program for the Preadolescent. Leader Manual and Student Workbook.

    ERIC Educational Resources Information Center

    Tindall, Judith A.; Salmon-White, Shirley

    This leader manual and student workbook identify human relationship skills which will be valuable to peer helpers as they use their skills in their official roles. The first part of the leader manual discusses the organization and structure of a peer helper program; competencies of adult peer leaders; characteristics of effective helpers; program…

  20. Blue Sky Below My Feet: Daycamp & After School Programs--9 to 11 Year Olds. Leader's Manual.

    ERIC Educational Resources Information Center

    California Univ., Berkeley. Cooperative Extension Service.

    This manual presents a 10-day lesson plan for day camp and after-school program leaders. The activities and experiments described in the manual focus on nutrition and space exploration. Topics covered by the lesson plan and specific projects include: (1) gravity; (2) food spoilage; (3) model rocket building and launching; (4) the basic food…

  1. Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications II. Users Manual and Program Description. 2; Users Manual and Program Description

    NASA Technical Reports Server (NTRS)

    McBride, Bonnie J.; Gordon, Sanford

    1996-01-01

    This users manual is the second part of a two-part report describing the NASA Lewis CEA (Chemical Equilibrium with Applications) program. The program obtains chemical equilibrium compositions of complex mixtures with applications to several types of problems. The topics presented in this manual are: (1) details for preparing input data sets; (2) a description of output tables for various types of problems; (3) the overall modular organization of the program with information on how to make modifications; (4) a description of the function of each subroutine; (5) error messages and their significance; and (6) a number of examples that illustrate various types of problems handled by CEA and that cover many of the options available in both input and output. Seven appendixes give information on the thermodynamic and thermal transport data used in CEA; some information on common variables used in or generated by the equilibrium module; and output tables for 14 example problems. The CEA program was written in ANSI standard FORTRAN 77. CEA should work on any system with sufficient storage. There are about 6300 lines in the source code, which uses about 225 kilobytes of memory. The compiled program takes about 975 kilobytes.

  2. 76 FR 60511 - Amendment of Marine Safety Manual, Volume III

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-29

    ... Federal Register (73 FR 3316). Background and Purpose Chapter 16 of Volume III of the Marine Safety Manual... have questions about this notice, call or e-mail Luke B. Harden, Mariner Credentialing Program...

  3. Report to the Legislature on: School Breakfast and Summer Food Service Programs. MGL Chapter 15 Section 1G(f) and Chapter 61 of the Acts of 2007 Line Item 7053-1925

    ERIC Educational Resources Information Center

    Massachusetts Department of Education, 2008

    2008-01-01

    The paper presents the report on "School Breakfast and Summer Food Service Program." Pursuant to Chapter 61 of the Acts of 2007 line item 7053-1925 and Massachusetts General Laws (MGL) chapter 15 section 1G(f), this report is submitted to the Legislature. An Act establishing school-based Nutrition and Child Hunger Relief Programs was signed into…

  4. Air Conditioning, Heating, and Refrigeration. Competency-Based Curriculum Manual.

    ERIC Educational Resources Information Center

    Gourley, Frank A., Jr.

    This manual was developed to serve as an aid to administrators and instructors involved with postsecondary air conditioning, heating, and refrigeration programs. The first of six chapters contains general information on program implementation, the curriculum design, facilities and equipment requirements, and textbooks and references. Chapter 2…

  5. Engineering and programming manual: Two-dimensional kinetic reference computer program (TDK)

    NASA Technical Reports Server (NTRS)

    Nickerson, G. R.; Dang, L. D.; Coats, D. E.

    1985-01-01

    The Two Dimensional Kinetics (TDK) computer program is a primary tool in applying the JANNAF liquid rocket thrust chamber performance prediction methodology. The development of a methodology that includes all aspects of rocket engine performance from analytical calculation to test measurements, that is physically accurate and consistent, and that serves as an industry and government reference is presented. Recent interest in rocket engines that operate at high expansion ratio, such as most Orbit Transfer Vehicle (OTV) engine designs, has required an extension of the analytical methods used by the TDK computer program. Thus, the version of TDK that is described in this manual is in many respects different from the 1973 version of the program. This new material reflects the new capabilities of the TDK computer program, the most important of which are described.

  6. Quality Manual

    NASA Astrophysics Data System (ADS)

    Koch, Michael

    The quality manual is the “heart” of every management system related to quality. Quality assurance in analytical laboratories is most frequently linked with ISO/IEC 17025, which lists the standard requirements for a quality manual. In this chapter examples are used to demonstrate, how these requirements can be met. But, certainly, there are many other ways to do this.

  7. User's manual for the coupled mode version of the normal modes rotor aeroelastic analysis computer program

    NASA Technical Reports Server (NTRS)

    Bergquist, R. R.; Carlson, R. G.; Landgrebe, A. J.; Egolf, T. A.

    1974-01-01

    This User's Manual was prepared to provide the engineer with the information required to run the coupled mode version of the Normal Modes Rotor Aeroelastic Analysis Computer Program. The manual provides a full set of instructions for running the program, including calculation of blade modes, calculations of variable induced velocity distribution and the calculation of the time history of the response for either a single blade or a complete rotor with an airframe (the latter with constant inflow).

  8. Occupational Work Experience. Manual of Operation.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Vocational and Adult Education.

    This manual is designed to assist school personnel, employers, parents/guardians, and students in understanding the policies and procedures required to operate effective occupational work experience (OWE) programs. The OWE mission statement appears first. Chapter I describes the OWE program, its structure, types of program organization, and…

  9. Bacteriological Methods in Water Quality Control Programs. Training Manual.

    ERIC Educational Resources Information Center

    Office of Water Program Operations (EPA), Cincinnati, OH. National Training and Operational Technology Center.

    This training manual presents material on basic bacteriological laboratory procedures as required by Federal Register Water Quality Guidelines. Course topics include: characteristics, occurrences, and significance of bacterial indicators of pollution; bacteriological water quality standards and criteria; collection and handling of samples;…

  10. Innocent Victims: NCJW Manual on Child Abuse and Neglect Programs.

    ERIC Educational Resources Information Center

    National Council of Jewish Women, New York, NY.

    The manual was written by the National Council of Jewish Women to provide guidelines for volunteer legislative action and community service for individuals in the area of child abuse and neglect. After an overview which details some of the causes of child abuse, information on child abuse and neglect legislation in each state is presented.…

  11. University of Rhode Island Adapted Aquatics Program Manual. Second Edition.

    ERIC Educational Resources Information Center

    Bloomquist, Lorraine E.

    This manual provides guidelines for aquatic teachers of people with disabilities. It is based on experience in teaching American Red Cross Adapted Aquatics and is to be used to complement and accompany the Red Cross Adapted Aquatics materials. Emphasis is placed on successful experiences in a positive, safe, reinforcing environment stressing…

  12. Organic Analyses in Water Quality Control Programs. Training Manual.

    ERIC Educational Resources Information Center

    Office of Water Program Operations (EPA), Cincinnati, OH. National Training and Operational Technology Center.

    This document is a lecture/laboratory manual dealing with the analysis of selected organic pollutants. It is intended for use by those having little or no experience in the field, but having one year (or equivalent) of college organic chemistry, and having basic laboratory skills (volumetric glassware, titration, analytical and trip balances).…

  13. Space Trajectories Error Analysis (STEAP) Programs. Volume 1: Analytic manual, update

    NASA Technical Reports Server (NTRS)

    1971-01-01

    Manual revisions are presented for the modified and expanded STEAP series. The STEAP 2 is composed of three independent but related programs: NOMAL for the generation of n-body nominal trajectories performing a number of deterministic guidance events; ERRAN for the linear error analysis and generalized covariance analysis along specific targeted trajectories; and SIMUL for testing the mathematical models used in the navigation and guidance process. The analytic manual provides general problem description, formulation, and solution and the detailed analysis of subroutines. The programmers' manual gives descriptions of the overall structure of the programs as well as the computational flow and analysis of the individual subroutines. The user's manual provides information on the input and output quantities of the programs. These are updates to N69-36472 and N69-36473.

  14. Highway Safety Program Manual: Volume 9: Identification and Surveillance of Accident Locations.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 9 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on identification and surveillance of accident locations. The purpose of the program, its specific objectives, and its relationship with other programs are explored. Federal authority in the…

  15. THE BLADE Program Basic Literacy for Adult Development. Instructor's Manual. Revised.

    ERIC Educational Resources Information Center

    Training Research and Development Station, Prince Albert (Saskatchewan).

    The nature and rationale of the BLADE (Basic Literacy for Adult Development) Program are explained in this instructor's manual, which also provides an analysis and index of the content. The BLADE Program raises adults to a measured Grade 5.0 level in reading, other communication skills, and mathematics. The program is completely individualized: it…

  16. LOGSIM user's manual. [Logic Simulation Program for computer aided design of logic circuits

    NASA Technical Reports Server (NTRS)

    Mitchell, C. L.; Taylor, J. F.

    1972-01-01

    The user's manual for the LOGSIM Program is presented. All program options are explained and a detailed definition of the format of each input card is given. LOGSIM Program operations, and the preparation of LOGSIM input data are discused along with data card formats, postprocessor data cards, and output interpretation.

  17. SRB-3D Solid Rocket Booster performance prediction program. Volume 3: Programmer's manual

    NASA Technical Reports Server (NTRS)

    Winkler, J. C.

    1976-01-01

    The programmer's manual for the Modified Solid Rocket Booster Performance Prediction Program (SRB-3D) describes the major control routines of SRB-3D, followed by a super index listing of the program and a cross-reference of the program variables.

  18. Instructor Manual, 1984-1985. Delta College Parent Awareness. Developmental Disabilities/Parent Awareness Program.

    ERIC Educational Resources Information Center

    Delta Coll., University Center, MI. Allied Health-Community Affairs.

    Designed for instructors in the Delta College Parent Awareness Program, this manual provides information on the program, its students, and appropriate instructional techniques. Introductory material describes the Parent Awareness Program designed for parents and family members of persons with mental retardation, cerebal palsy, epilepsy, autism,…

  19. Corralling Your Camp Horse Program: Reviewing Your Policies and Procedures and Creating a Written Manual.

    ERIC Educational Resources Information Center

    Glunt, Jim

    2000-01-01

    Camps offering horse programs need to have written policies and procedures to ensure quality control and risk minimization. Basic elements of a horse program manual include routine care of horses; general guidelines relating to participants, program, and staff; and emergency plans. Four information resources are presented. (TD)

  20. Report to the Legislature on the Schools for the 21st Century Program (Chapter 525, Laws of 1987). Executive Summary.

    ERIC Educational Resources Information Center

    Washington Office of the State Superintendent of Public Instruction, Olympia.

    In May 1987, the Washington State Legislature passed Chapter 525 Laws of 1987 (Substitute Senate Bill 5479) that authorized the Schools for the 21st Century Program. This report presents information about the progress and results of that program. The State Board of Education selected 33 schools to be awarded 10 additional staff days; supplemental…

  1. Computer program development and user's manual for program PARACH. [to investigate parachute spent solid rocket booster during terminal descent

    NASA Technical Reports Server (NTRS)

    Murphree, H. I.

    1979-01-01

    A user's manual is provided for program PARACH, a FORTRAN digital computer program operational on the Univac 1108. A description of the program and operating instructions for it are included. Program PARACH is used to study the interaction dynamics of a parachute and its payload during terminal descent. Operating instructions, required input data, program options and limitations, and output data are described. Subroutines used in this program are also listed and explained.

  2. Automated Estimating System (AES), Standard Value Update Program, user`s manual

    SciTech Connect

    Schwartz, R.K.; Holder, D.A.

    1994-08-01

    This manual contains instructions for operating the Standard Value Update Program. This program is operated and controlled by selected individuals in the Estimating and Scheduling Engineering Department of the Martin Marietta Energy Systems, Inc., Engineering Division. It is used to control and standardized input into the Automated Estimating System (AES) Estimating program, a person computer-based software package designed to aid in the creation, updating, and reporting of project cost estimates. The AES Estimating program is documented in a separate user`s manual.

  3. Programmer's manual for the Mission Analysis Evaluation and Space Trajectory Operations program (MAESTRO)

    NASA Technical Reports Server (NTRS)

    Lutzky, D.; Bjorkman, W. S.

    1973-01-01

    The Mission Analysis Evaluation and Space Trajectory Operations program known as MAESTRO is described. MAESTRO is an all FORTRAN, block style, computer program designed to perform various mission control tasks. This manual is a guide to MAESTRO, providing individuals the capability of modifying the program to suit their needs. Descriptions are presented of each of the subroutines descriptions consist of input/output description, theory, subroutine description, and a flow chart where applicable. The programmer's manual also contains a detailed description of the common blocks, a subroutine cross reference map, and a general description of the program structure.

  4. Transpiration and film cooling boundary layer computer program. Volume 2: Computer program and user's manual

    NASA Technical Reports Server (NTRS)

    Gloss, R. J.

    1971-01-01

    A finite difference turbulent boundary layer computer program which allows for mass transfer wall cooling and equilibrium chemistry effects is presented. The program is capable of calculating laminar or turbulent boundary layer solutions for an arbitrary ideal gas or an equilibrium hydrogen oxygen system. Either two dimensional or axisymmetric geometric configurations may be considered. The equations are solved, in nondimension-alized physical coordinates, using the implicit Crank-Nicolson technique. The finite difference forms of the conservation of mass, momentum, total enthalpy and elements equations are linearized and uncoupled, thereby generating easily solvable tridiagonal sets of algebraic equations. A detailed description of the computer program, as well as a program user's manual is provided. Detailed descriptions of all boundary layer subroutines are included, as well as a section defining all program symbols of principal importance. Instructions are then given for preparing card input to the program and for interpreting the printed output. Finally, two sample cases are included to illustrate the use of the program.

  5. Simulated trajectories error analysis program, version 2. Volume 2: Programmer's manual

    NASA Technical Reports Server (NTRS)

    Vogt, E. D.; Adams, G. L.; Working, M. M.; Ferguson, J. B.; Bynum, M. R.

    1971-01-01

    A series of three computer programs for the mathematical analysis of navigation and guidance of lunar and interplanetary trajectories was developed. All three programs require the integration of n-body trajectories for both interplanetary and lunar missions. The virutal mass technique is used in all three programs. The user's manual contains the information necessary to operate the programs. The input and output quantities of the programs are described. Sample cases are given and discussed.

  6. Analysis of Shapes. Mathematics-Methods Program Unit. Student Manual [and] Instructor's Manual.

    ERIC Educational Resources Information Center

    Kerr, Donald R., Jr.; LeBlanc, John F.

    This unit is 1 of 12 developed for the university classroom portion of the Mathematics-Methods Program (MMP), created by the Indiana University Mathematics Education Development Center (MEDC) as an innovative program for the mathematics training of prospective elementary school teachers (PSTs). Each unit is written in an activity format that…

  7. Pesticide Applicator Training Manual, Category 3 - Ornamentals and Turf for New York State. A Training Program for the Certification of Commercial Pesticide Applicators.

    ERIC Educational Resources Information Center

    Zuchorski, Edward, Jr., Ed.

    This manual provides information needed to meet specific standards for certification as a pesticide applicator. Each of the eight chapters deals with a different aspect of pesticide use. Chapter one discusses the problems of use as it relates to safety of humans and the environment. Chapter two is concerned with the identification and diagnosis of…

  8. Highway Safety Program Manual: Volume 8: Alcohol in Relation to Highway Safety.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 8 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on alcohol in relation to highway safety. The purpose and objectives of the alcohol program are outlined. Federal authority in the area of highway safety and general policies regarding…

  9. Viscous wing theory development. Volume 2: GRUMWING computer program user's manual

    NASA Technical Reports Server (NTRS)

    Chow, R. R.; Ogilvie, P. L.

    1986-01-01

    This report is a user's manual which describes the operation of the computer program, GRUMWING. The program computes the viscous transonic flow over three-dimensional wings using a boundary layer type viscid-inviscid interaction approach. The inviscid solution is obtained by an approximate factorization (AFZ)method for the full potential equation. The boundary layer solution is based on integral entrainment methods.

  10. Outer Space...Calling All Readers. 1991 Summer Reading Program Manual.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Cultural Resources, Raleigh. Div. of State Library.

    This manual provides guidelines and materials for librarians planning a summer reading program for children in North Carolina on the theme of outer space. An evaluation form to be returned to the State Library of North Carolina at the end of the summer is included. The introduction includes discussions of summer reading materials and programs;…

  11. Identification of Strategies to Increase Retention of Disadvantaged Students in Nontraditional Programs in Florida. Manual.

    ERIC Educational Resources Information Center

    Thomas, Hollie B.; And Others

    This manual is designed to assist school personnel in their efforts to increase the number of women and nontraditional students who are recruited into and retained in nontraditional occupational preparation programs. Discussed first are the nature and scope of the problem of retaining disadvantaged students in nontraditional vocational programs,…

  12. Highway Safety Program Manual: Volume 12: Highway Design, Construction and Maintenance.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 12 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on highway design, construction and maintenance. The purpose and specific objectives of such a program are described. Federal authority in the area of highway safety and policies regarding…

  13. ESEA Title I Migrant Administration Manual Project Preparation and Program Management.

    ERIC Educational Resources Information Center

    Seurynck, John L.; Hicks, Garlin A.

    The manual outlines information on design and operation of the ESEA (Elementary and Secondary Education Act) Title I Migrant Education Program at the state and local levels. Part I outlines information on the state level: legislative authorization and general responsibilities of the state education agency (SEA); annual program plan and budget;…

  14. Highway Safety Program Manual: Volume 16: Debris Hazard Control and Cleanup.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 16 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on debris hazard control and cleanup. The purpose and objectives of such a program are outlined. Federal authority in the area of highway safety and policies regarding a debris control…

  15. General Safety Manual for Vocational-Technical Education and Industrial Arts Programs. Bulletin No. 1674.

    ERIC Educational Resources Information Center

    Dennis, Bill; Poston, David

    This manual is designed to offer suggestions for teaching safety in Louisiana industrial arts and vocational education programs. The suggestions and information presented are intended for use in an ongoing safety program, not a short unit presented at the beginning of the school year. Following an introduction in unit 1, the material has been…

  16. SELF-INSTRUCTION IN THE NON-WESTERN LANGUAGES--A MANUAL FOR PROGRAM DIRECTORS.

    ERIC Educational Resources Information Center

    BOYD-BOWMAN, PETER

    THIS INSTRUCTIONAL MANUAL WAS PREPARED FOR COLLEGE ADMINISTRATORS WHO WISH TO ESTABLISH AUTOINSTRUCTIONAL PROGRAMS IN LANGUAGES NOT OFFERED IN THE REGULAR CLASS SCHEDULES OF THEIR INSTITUTIONS. SUCH PROGRAMS WOULD EMPHASIZE INDEPENDENT STUDY WITH COMMERCIALLY AVAILABLE TEXTS AND TAPE RECORDINGS, AND PRONUNCIATION DRILLS SUPERVISED BY NATIVE…

  17. WINDOWAC (Wing Design Optimization With Aeroelastic Constraints): Program manual

    NASA Technical Reports Server (NTRS)

    Haftka, R. T.; Starnes, J. H., Jr.

    1974-01-01

    User and programer documentation for the WIDOWAC programs is given. WIDOWAC may be used for the design of minimum mass wing structures subjected to flutter, strength, and minimum gage constraints. The wing structure is modeled by finite elements, flutter conditions may be both subsonic and supersonic, and mathematical programing methods are used for the optimization procedure. The user documentation gives general directions on how the programs may be used and describes their limitations; in addition, program input and output are described, and example problems are presented. A discussion of computational algorithms and flow charts of the WIDOWAC programs and major subroutines is also given.

  18. Marketing Your Adult Literacy Program: A "How To" Manual. Revised.

    ERIC Educational Resources Information Center

    Smith, Barbara E.

    This document presents a training module designed to help adult literacy program providers in New York and elsewhere to use the principles of social marketing to improve recruitment and retention in adult education programming. Literacy program providers are taught to view the social marketing process as a process of exchange between themselves as…

  19. Program to Optimize Simulated Trajectories (POST). Volume 3: Programmer's manual

    NASA Technical Reports Server (NTRS)

    Brauer, G. L.; Cornick, D. E.; Habeger, A. R.; Petersen, F. M.; Stevenson, R.

    1975-01-01

    Information pertinent to the programmer and relating to the program to optimize simulated trajectories (POST) is presented. Topics discussed include: program structure and logic, subroutine listings and flow charts, and internal FORTRAN symbols. The POST core requirements are summarized along with program macrologic.

  20. National Training and Dissemination Program: LRE Public Relations Manual.

    ERIC Educational Resources Information Center

    Alvez, Aggie

    In order to champion law-related education, this volume argues that administrators of law-related education (LRE) programs should make public relations an integral part of program planning. An introductory section defines public relations and offers basic advice for developing goals and strategies. The guide advises program directors to train…

  1. New Careers: The Patrolman Aide. Trainer's Manual.

    ERIC Educational Resources Information Center

    White, Richardson, Jr.; Stein, John H.

    Designed to assist in developing a training program to equip unemployed and underemployed persons with the skills needed for helping patrolmen to provide community service, the manual discusses several aspects of implementing the training program in the first four chapters: "New Careers and Law Enforcement,""Relevance of New Careers to Law…

  2. User's manual for MMLE3, a general FORTRAN program for maximum likelihood parameter estimation

    NASA Technical Reports Server (NTRS)

    Maine, R. E.; Iliff, K. W.

    1980-01-01

    A user's manual for the FORTRAN IV computer program MMLE3 is described. It is a maximum likelihood parameter estimation program capable of handling general bilinear dynamic equations of arbitrary order with measurement noise and/or state noise (process noise). The theory and use of the program is described. The basic MMLE3 program is quite general and, therefore, applicable to a wide variety of problems. The basic program can interact with a set of user written problem specific routines to simplify the use of the program on specific systems. A set of user routines for the aircraft stability and control derivative estimation problem is provided with the program.

  3. Child Care Center Start-Up Manual (2nd Edition).

    ERIC Educational Resources Information Center

    Broome County Child Development Council, Inc., Binghamton, NY.

    This manual is intended to be used as a guideline for establishing a high quality child care program. It is based on New York State regulations and on widely accepted practices that support early childhood development. Chapter 1 gives an overview of the start-up process and includes a checklist of major tasks. Chapter 2 discusses assessment…

  4. SPIE's School Outreach Activity Program (SOAP) by IIT Madras SPIE Student Chapter: a review

    NASA Astrophysics Data System (ADS)

    Kalikivayi, Lavanya; Kalikivayi, V.; Udayakumar, K.; Ganesan, A. R.

    2014-09-01

    One of the important aspects of SPIE is "Community Support and Outreach Education", which should raise awareness and interest in optics and photonics among the targeted communities and school children. Hence as part of SPIE IIT Madras student chapter, we carried out SPIE SOAP, a `School Outreach Activity Program'. Two types of schools were identified, one a high socio-economic status school and the other a low socio-economic status school having a majority of poor children. Optics related scientific experiments were demonstrated in these schools followed by oral quiz session to the students to assess the level of their knowledge before and after the experiments. We also clubbed this activity with "Vision Screening" and distribution of free spectacles for those children who live below poverty line. Out of the 415 children screened, 60.84% eyes were having normal vision, while 39.16% were found to have refractive errors (Myopia 35.78% and Hyperopia 3.38%) where some of them could not even read the board. Treatable eye diseases were also found in 0.72% of the children. The entire activity is been discussed and documented in this paper.

  5. Training Manual for the Energy Conservation Analysis Project.

    ERIC Educational Resources Information Center

    Massachusetts Univ., Amherst. Cooperative Extension Service.

    This document is the Massachusetts Energy Extension Service training manual for Residential Energy Auditors. This manual is part of a four-week program to train persons to perform home energy audits and was developed under the Energy Conservation Analysis Project (ECAP) at the University of Massachusetts. The chapter titles include: (1) Project…

  6. The Texas State Manual for Identification and Recruitment of the Migrant Students. A Manual for Practitioners in the Migrant Education Program.

    ERIC Educational Resources Information Center

    Texas Education Agency, Austin. Div. of Migrant Education.

    This manual provides training for Migrant Education Program personnel in the areas of program purpose and history, identification and recruitment of eligible students, program services, and the Migrant Student Record Transfer System (MSRTS) and other interstate linkages. The identification and recruitment process consists of three interrelated…

  7. In Vivo Monitoring Program Manual, PNL-MA-574

    SciTech Connect

    Lynch, Timothy P.

    2010-07-01

    An overview of the administration for the In Vivo Monitoring Program (IVMP) for Hanford. This includes organizational structure and program responsibilities; coordination of in vivo measurements; scheduling measurements; performing measurements; reporting results; and quality assurance. Overall responsibility for the management of the IVMP rests with the Program Manager (PM). The PM is responsible for providing the required in vivo counting services for Hanford Site contractor employees in accordance with Department of Energy (DOE) requirements and the specific statements of work.

  8. NECAP 4.1: NASA's energy-cost analysis program user's manual

    NASA Technical Reports Server (NTRS)

    Jensen, R. N.; Henninger, R. H.; Miner, D. L.

    1983-01-01

    The Enery Cost Analysis Program (NECAP) is a powerful computerized method to determine and to minimize building energy consumption. The program calculates hourly heat gain or losses taking into account the building thermal resistance and mass, using hourly weather and a "response factor' method. Internal temperatures are allowed to vary in accordance with thermostat settings and equipment capacity. A simplified input procedure and numerous other technical improvements are presented. This Users Manual describes the program and provides examples.

  9. Development of weight/sizing design synthesis computer program. Volume 3: User Manual

    NASA Technical Reports Server (NTRS)

    Garrison, J. M.

    1973-01-01

    The user manual for the weight/sizing design synthesis program is presented. The program is applied to an analysis of the basic weight relationships for the space shuttle which contribute significant portions of the inert weight. The relationships measure the parameters of load, geometry, material, and environment. A verbal description of the processes simulated, data input procedures, output data, and values present in the program is included.

  10. AIRCL: A programmed system for generating NC tapes for airplane models. User's manual

    NASA Technical Reports Server (NTRS)

    Akgerman, N.; Billhardt, C. F.

    1981-01-01

    A computer program is presented which calculates the cutter location file needed to machine models of airplane wings or wing-fuselage combinations on numerically controlled machine tools. Input to the program is a data file consisting of coordinates on the fuselage and wing. From this data file, the program calculates tool offsets, determines the intersection between wing and fuselage tool paths, and generates additional information needed to machine the fuselage and/or wing. Output from the program can be post processed for use on a variety of milling machines. Information on program structure and methodology is given as well as the user's manual for implementation of the program.

  11. Developing Community Mental Health Programs: A Resource Manual.

    ERIC Educational Resources Information Center

    United Community Planning Corp., Boston, MA.

    Comprehensive mental health programs should be designed on the basis of identified mental health needs and locally established priorities so that the resulting combination of services is geared to the specific and unique requirements of the catchment area. In addition to being comprehensive, local programs should be physically accessible, ensure…

  12. General purpose computer program for interacting supersonic configurations: Programmer's manual

    NASA Technical Reports Server (NTRS)

    Crill, W.; Dale, B.

    1977-01-01

    The program ISCON (Interacting Supersonic Configuration) is described. The program is in support of the problem to generate a numerical procedure for determining the unsteady dynamic forces on interacting wings and tails in supersonic flow. Subroutines are presented along with the complete FORTRAN source listing.

  13. A Manual on Planning Educational Programs for Older Adults.

    ERIC Educational Resources Information Center

    Hendrickson, Andrew, Ed.

    The compendium of addresses and resource documents taken from reports of three Institutes on Education for Aging held at Florida State University, 1969, 1971, and 1972 is offered as a general guide for those wishing to initiate educational programs for the aging. The document provides practical program suggestions and the views of authorities…

  14. NECAP - NASA's Energy Cost Analysis Program. Operations manual

    NASA Technical Reports Server (NTRS)

    Miner, D. L.

    1982-01-01

    The use of the NASA'S ENERGY COST ANALYSIS PROGRAM (NECAP) is described. Supplementary information on new capabilities and program options is also provided. The Control Data Corporation (CDC) NETWORK OPERATING SYSTEM (NOS) is discussed. The basic CDC NOS instructions which are required to successfully operate NECAP are provided.

  15. User's manual for geophysical well-logging software programs

    SciTech Connect

    Petrie, G.M.; Gibson, D.; Blair, S.C.

    1983-02-01

    Since 1958 the Ground-Water Surveillance Program for the Hanford Site has made geophysical logging measurements in most of the 800 wells and deep boreholes that have been drilled on the Hanford Site. In 1980 the Pacific Northwest Laboratory (PNL), which conducts the Ground-Water Surveillance Program, began forming a computerized data base for storing and retrieving geophysical well log data and developing software for quantitative analysis of the well log data. This report, designed to serve as a user's guide, documents the data base system that handles the well log data. Two programs, DIGLOG1 and LOGIT, are used to manipulate the data. The program DIGLOG1 translates analog paper strip charts into digital format; the program LOGIT is a general utility program that edits, displays, checks, stores, writes, and deletes sets of well log data. These two programs do not provide sophisticated display and analytical capabilities; rather, they provide programs that give the user easy access to powerful standard analytical software.

  16. GKS-EZ programming manual for FORTRAN-77

    SciTech Connect

    Beach, R.C.

    1992-01-01

    A standard has now been adopted for subroutine packages that drive graphic devices. It is known as the Graphical Kernel system (GKS), and many commercial implementations of it are available. Unfortunately, it is a difficult system to learn, and certain functions that are important for scientific use are not provided. Although GKS can be used to achieve portability of graphic applications between graphic devices, computers, and operating systems, it can also be misused in this respect. In addition, it introduces the very real problem of portability between the various implementations of GKS. This document describes a set of FORTRAN-77 subroutines that may be used to control a wide variety of graphic devices and overcome most of these problems. Some of these subroutines are from GKS itself, while others are higher-level subroutines that call GKS subroutines. These subroutines are collectively known as GKS-EZ. The purpose is to supply someone who is not a specialist in computer graphics with a flexible, robust, and easy to learn graphics system. Users of GKS-EZ should not have much need for a full GKS manual; this document will supply all of the information to use GKS-EZ except for a few items. These missing items include the numeric identification of the supported graphic devices and the procedure for linking the GKS subroutines into a executable module.

  17. MSFC crack growth analysis computer program, version 2 (users manual)

    NASA Technical Reports Server (NTRS)

    Creager, M.

    1976-01-01

    An updated version of the George C. Marshall Space Flight Center Crack Growth Analysis Program is described. The updated computer program has significantly expanded capabilities over the original one. This increased capability includes an extensive expansion of the library of stress intensity factors, plotting capability, increased design iteration capability, and the capability of performing proof test logic analysis. The technical approaches used within the computer program are presented, and the input and output formats and options are described. Details of the stress intensity equations, example data, and example problems are presented.

  18. Demonstration and Research Pest Control: A Training Program for the Certification of Pesticide Applicators, Manual No. 10.

    ERIC Educational Resources Information Center

    Rust, Harry K.; And Others

    This manual is intended to provide the information necessary to meet EPA standards for demonstration and research pest control and prepare for the written examination required for certification. Emphasis is placed on the principles of safe pesticide use. Chapters are included on pesticide applicator certification in Virginia, basics of pest…

  19. Guidelines for Management Consulting Programs for Small-Scale Enterprise. Appropriate Technologies for Development. Manual M-14.

    ERIC Educational Resources Information Center

    Vaughan, Gary L.

    This manual is designed to assist management consultants in working with small-scale entrepreneurs in developing countries. Addressed in an overview of the small-scale enterprise (SSE) are: the role of the SSE in third world development, problems of SSEs, and target firms. The second chapter deals with various forms of management assistance to…

  20. Hanford Waste Vitrification Plant technical manual

    SciTech Connect

    Larson, D.E.; Watrous, R.A.; Kruger, O.L.

    1996-03-01

    A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. The immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version.

  1. Generic Optimization Program User Manual Version 3.0.0

    SciTech Connect

    Wetter, Michael

    2009-05-11

    GenOpt is an optimization program for the minimization of a cost function that is evaluated by an external simulation program. It has been developed for optimization problems where the cost function is computationally expensive and its derivatives are not available or may not even exist. GenOpt can be coupled to any simulation program that reads its input from text files and writes its output to text files. The independent variables can be continuous variables (possibly with lower and upper bounds), discrete variables, or both, continuous and discrete variables. Constraints on dependent variables can be implemented using penalty or barrier functions. GenOpt uses parallel computing to evaluate the simulations. GenOpt has a library with local and global multi-dimensional and one-dimensional optimization algorithms, and algorithms for doing parametric runs. An algorithm interface allows adding new minimization algorithms without knowing the details of the program structure. GenOpt is written in Java so that it is platform independent. The platform independence and the general interface make GenOpt applicable to a wide range of optimization problems. GenOpt has not been designed for linear programming problems, quadratic programming problems, and problems where the gradient of the cost function is available. For such problems, as well as for other problems, special tailored software exists that is more efficient.

  2. Propeller aircraft interior noise model: User's manual for computer program

    NASA Technical Reports Server (NTRS)

    Wilby, E. G.; Pope, L. D.

    1985-01-01

    A computer program entitled PAIN (Propeller Aircraft Interior Noise) has been developed to permit calculation of the sound levels in the cabin of a propeller-driven airplane. The fuselage is modeled as a cylinder with a structurally integral floor, the cabin sidewall and floor being stiffened by ring frames, stringers and floor beams of arbitrary configurations. The cabin interior is covered with acoustic treatment and trim. The propeller noise consists of a series of tones at harmonics of the blade passage frequency. Input data required by the program include the mechanical and acoustical properties of the fuselage structure and sidewall trim. Also, the precise propeller noise signature must be defined on a grid that lies in the fuselage skin. The propeller data are generated with a propeller noise prediction program such as the NASA Langley ANOPP program. The program PAIN permits the calculation of the space-average interior sound levels for the first ten harmonics of a propeller rotating alongside the fuselage. User instructions for PAIN are given in the report. Development of the analytical model is presented in NASA CR 3813.

  3. SINDA-NASTRAN interfacing program theoretical description and user's manual

    NASA Technical Reports Server (NTRS)

    Winegar, Steven R.

    1987-01-01

    The task of converting SINDA finite difference thermal model temperature results into NASTRAN finite element model thermal loads can be very labor intensive if there is not one node-to-one element, or systematic node-to-element. correlation between models. This paper describes the SINDA-NASTRAN Interfacing Program (SNIP), a FORTRAN computer code that generates NASTRAN structural model thermal load cards given by SINDA (or similar thermal model) temperature results and thermal model geometric data. SNIP generates NASTRAN thermal load cards for NASTRAN plate, shell, bar, and beam elements. The paper describes the interfacing procedures used by SNIP, and discusses set-up and operation of the program. Sample cases are included to demonstrate use of the program and show its performance under a variety of conditions. SNIP can provide structural model thermal loads that accurately reflect thermal model results while reducing the time required to interface thermal and structural models when compared to other methods.

  4. Photovoltaic subsystem marketing and distribution model: programming manual. Final report

    SciTech Connect

    Not Available

    1982-07-01

    Complete documentation of the marketing and distribution (M and D) computer model is provided. The purpose is to estimate the costs of selling and transporting photovoltaic solar energy products from the manufacturer to the final customer. The model adjusts for the inflation and regional differences in marketing and distribution costs. The model consists of three major components: the marketing submodel, the distribution submodel, and the financial submodel. The computer program is explained including the input requirements, output reports, subprograms and operating environment. The program specifications discuss maintaining the validity of the data and potential improvements. An example for a photovoltaic concentrator collector demonstrates the application of the model.

  5. Users manual for the Variable dimension Automatic Synthesis Program (VASP)

    NASA Technical Reports Server (NTRS)

    White, J. S.; Lee, H. Q.

    1971-01-01

    A dictionary and some problems for the Variable Automatic Synthesis Program VASP are submitted. The dictionary contains a description of each subroutine and instructions on its use. The example problems give the user a better perspective on the use of VASP for solving problems in modern control theory. These example problems include dynamic response, optimal control gain, solution of the sampled data matrix Ricatti equation, matrix decomposition, and pseudo inverse of a matrix. Listings of all subroutines are also included. The VASP program has been adapted to run in the conversational mode on the Ames 360/67 computer.

  6. Blade loss transient dynamics analysis. Volume 3: User's manual for TETRA program

    NASA Technical Reports Server (NTRS)

    Black, G. R.; Gallardo, V. C.; Storace, A. S.; Sagendorph, F.

    1981-01-01

    The users manual for TETRA contains program logic, flow charts, error messages, input sheets, modeling instructions, option descriptions, input variable descriptions, and demonstration problems. The process of obtaining a NASTRAN 17.5 generated modal input file for TETRA is also described with a worked sample.

  7. Economic Development through Youth. A Program for Schools and Communities. Manual.

    ERIC Educational Resources Information Center

    Nolen, Lori

    This manual is designed to help teachers, businesses, Chambers of Commerce, and students start their own economic development activities and youth ventures. It describes a two-step plan to economic development through youth: development of an in-school student chamber of commerce program and development of a youth-owned venture. The first part of…

  8. Integrated Occupational Program, Grades 8 and 9 Social Studies: Teacher Resource Manual. Interim.

    ERIC Educational Resources Information Center

    McCardle, Elizabeth, Ed.

    This manual was developed to assist classroom teachers responsible for implementing the grades 8 and 9 integrated occupational social studies program in Alberta, Canada. It contains: (1) information about the goals and objectives of the curriculum; (2) thematic contexts for the delivery of prescribed knowledge, skills, and attitudes; (3)…

  9. Language Arts Grades 8 and 9. Teacher Resource Manual. Integrated Occupational Program. Interim-1989 Curriculum.

    ERIC Educational Resources Information Center

    Alberta Dept. of Education, Edmonton.

    Developed to assist classroom teachers in implementing the Grades 8 and 9 Integrated Occupational Language Arts program, this teacher resource manual is intended for use as a practical planning and instructional tool and has been designed for a minimum of 150 hours of instruction at each grade level. It contains: further information about the…

  10. Good School Maintenance: A Manual of Programs and Procedures for Buildings, Grounds and Equipment. Third Edition.

    ERIC Educational Resources Information Center

    Illinois Association of School Boards, Springfield.

    This manual, published by the Illinois Association of School Boards, was designed to be used as a teaching tool and reference source for overseeing effective school maintenance. Section 1 describes the basics of good school maintenance, including managing the program, using computers, controlling energy costs, ensuring safe practices, designing…

  11. Good School Maintenance. A Manual of Programs and Procedures for Buildings--Grounds--Equipment.

    ERIC Educational Resources Information Center

    Harroun, Jack T., Ed.

    This guide provides a basic program for managers and supervisors responsible for the care of buildings, grounds, and equipment; provides the maintenance staff member with basic information and solutions to typical problems; and is intended to be used as a training tool and a reference source. The manual is divided into five categories. (1) "Basics…

  12. Us in a Bus: A Transportation Manual for Head Start Programs.

    ERIC Educational Resources Information Center

    Education Development Center, Inc., Newton, MA.

    The purpose of this manual is to provide Head Start directors, transportation supervisors, and trainers with information and activities that will help develop, enhance, and maintain a safe and efficient transportation system for their programs. Contents are organized into three categories: safety procedures, planning a transportation system, and…

  13. Lifetime Planning Manual, 1984-1985. Delta College Parent Awareness. Developmental Disabilities/Parent Awareness Program.

    ERIC Educational Resources Information Center

    Delta Coll., University Center, MI. Allied Health-Community Affairs.

    Developed as part of Delta College's Parent Awareness Program, this manual provides information related to the special concerns of parents and families of developmentally disabled children, adolescents, and adults. The first section stresses the importance of planning and preparing for the future and establishing adequate financial and personal…

  14. The Maine Sealant Manual for School-Based and School-Linked Dental Sealant Programs.

    ERIC Educational Resources Information Center

    Hayward, Kneka, Ed.

    This manual is designed for use by school personnel and dental personnel to aid in the development and maintenance of school-based or school-linked dental sealant programs. The sections include (1) "Introduction"; (2) "Guidelines" (school selection, school contacts, dental providers, target grades, and tooth selection criteria); (3) "Education and…

  15. Occupational Component. 36-Level Courses. Teacher Resource Manual. Integrated Occupational Program.

    ERIC Educational Resources Information Center

    Alberta Dept. of Education, Edmonton. Curriculum Branch.

    This 36-level occupational component of Integrated Occupational Program (IOP) consists of 8 occupational clusters composed of 20 occupational courses. Each course contains learning activities so that students in Alberta (Canada) may develop occupational concepts, skills, and attitudes. This teacher's manual consists of the following sections:…

  16. Environmental monitoring and assessment program (EMAP) laboratory methods manual estuaries. Volume 1. Biological and physical analyses

    SciTech Connect

    Strobel, C.J.; Klemm, D.J.; Lobring, L.B.; Eichelberger, J.W.; Alford-Stevens, A.

    1995-08-01

    This document is intended to document analytical methods for use by laboratories conducting analyses for the Environmental Monitoring and Assessment Program-Estuaries. This document is volume I of a two-part series. The second volume of the EMAP-Estuaries Laboratory Methods Manual presents methods for the chemical analyses of sediments and tissue.

  17. Laboratory Manual (For Concrete Instruction Course); Instructor's Guide, Pilot Program Edition.

    ERIC Educational Resources Information Center

    Portland Cement Association, Cleveland, OH.

    This laboratory manual, prepared for a 2-year program in junior colleges and technical institutes, is designed to accompany the instructional materials to train persons for employment as technicians in the cement and concrete industries. Included are 16 laboratory assignments for each of the following: (1) Principles of Concrete, (2) Concrete in…

  18. New Mexico Statewide Assessment Program (NMSAP) Procedures Manual, 2007-2008

    ERIC Educational Resources Information Center

    New Mexico Public Education Department, 2007

    2007-01-01

    This manual has been prepared for all New Mexico Statewide Assessment Program (NMSAP) assessment administrators, teachers, school specialists, and principals. It includes information about the following topics: PED contacts, New Mexico Standards Based Assessments (SBA), Grades 3-8 and 11; New Mexico High School Competency Examination (NMHSCE);…

  19. Occupational Component. 26-Level Courses. Teacher Resource Manual. Integrated Occupational Program. Interim-1991: Curriculum.

    ERIC Educational Resources Information Center

    Alberta Dept. of Education, Edmonton. Curriculum Branch.

    This planning and instructional manual is designed to assist teachers in implementing the 20 10-credit-hour courses that make up the 26-level occupational component of the Integrated Occupational Program (IOP) in Alberta, Canada. (The IOP was developed to assist students who experience difficulties in secondary education and to help students make…

  20. Manual for the Deaf-Blind Program and Ability Screening Test.

    ERIC Educational Resources Information Center

    Lyall, J.; And Others

    Presented are a manual and a screening test to assist teachers and professionals to determine the functional ability level and individual program needs of deaf blind and multiply handicapped children. It is noted that the individually administered 10-minute test, based on Gesell's developmental theory, consists of items in seven basic…

  1. Vocational Education: A Manual of Program Accessibility for the Physically Disabled Two-Year College Applicant.

    ERIC Educational Resources Information Center

    State Univ. of New York, Albany. Coordinating Area No. 4.

    This manual was designed as a resource guide for handicapped individuals interested in two-year occupational training at various institutions within the State University of New York (SUNY) or City University of New York (CUNY) systems. It provides an overview of 50 vocational degree programs, indicates which educational institutions offer such…

  2. Biomedical Mathematics, Unit II: Propagation of Error, Vectors and Linear Programming. Instructor's Manual. Revised Version, 1975.

    ERIC Educational Resources Information Center

    Biomedical Interdisciplinary Curriculum Project, Berkeley, CA.

    This instructor's manual presents lesson plans for a unit of mathematics within the Biomedical Interdisciplinary Curriculum Project (BICP), a two-year interdisciplinary precollege curriculum aimed at preparing high school students for entry into college and vocational programs leading to a career in the health field. Lessons concentrate on…

  3. A Resource Manual for Speech and Hearing Programs in Oklahoma.

    ERIC Educational Resources Information Center

    Oklahoma State Dept. of Education, Oklahoma City.

    Administrative aspects of the Oklahoma speech and hearing program are described, including state requirements, school administrator role, and organizational and operational procedures. Information on speech and language development and remediation covers language, articulation, stuttering, voice disorders, cleft palate, speech improvement,…

  4. An Introductory Manual on Youth Participation for Program Administrators.

    ERIC Educational Resources Information Center

    National Commission on Resources for Youth, Inc., New York, NY.

    Suggestions for starting or improving youth participation projects are presented for staffs in a broad range of agencies--Red Cross, YMCA/YWCA, Boy and Girl Scouts, alternative community-based programs, and government agencies dealing with youth. Two central concerns are greater involvement of young people already in contact with youth-serving…

  5. Skills Enhancement Program. Performance Report, Evaluation Report, and Administration Manual.

    ERIC Educational Resources Information Center

    Wayne County Community Coll., Detroit, MI.

    This document contains three products of the Skills Enhancement Program, a cooperative venture between Industrial Technology Institute (ITI), Wayne County (Michigan) Community College (WCCC), and Great Lakes Steel (GLS). The performance report describes the project's objective of designing a job-related literacy curriculum for hourly workers and…

  6. REFORMA/UCLA Mentor Program: A Mentoring Manual.

    ERIC Educational Resources Information Center

    Tauler, Sandra

    Although mentoring dates back to Greek mythology, the concept continues to thrive in today's society. Mentoring is a strategy that successful people have known about for centuries. The REFORMA/UCLA Mentor Program has made use of this strategy since its inception in November 1985 at the Graduate School of Library and Information Science at the…

  7. Professional Student Exchange Program (PSEP) Administrative Manual. Revised

    ERIC Educational Resources Information Center

    Western Interstate Commission for Higher Education, 2012

    2012-01-01

    WICHE (the Western Interstate Commission for Higher Education) is a regional, nonprofit organization. WICHE and its 15 member states work to improve access to higher education and ensure student success. Its student exchange programs, regional initiatives, and its research and policy work allow it to assist constituents throughout the West and…

  8. Virginia Alternative Assessment Program: Implementation Manual (Revised 2002).

    ERIC Educational Resources Information Center

    Virginia State Dept. of Education, Richmond.

    The Individuals with Disabilities Education Act requires state programs to adopt standards for all children, including those with disabilities, in state and district-wide assessments with the provision of appropriate and necessary accommodations. For students who cannot participate in state and district-wide assessments, the law requires that…

  9. Principles of Concrete, Instructor's Manual; Pilot Program Edition.

    ERIC Educational Resources Information Center

    Portland Cement Association, Cleveland, OH.

    This guide, prepared for a 2-year course in junior colleges and technical institutes, is designed to be a national program to train persons for employment as technicians in the cement and concrete industries. Included are 48 session outlines divided into four units of study. Each unit contains objectives, outline, related information, and…

  10. Users manual for the Chameleon parallel programming tools

    SciTech Connect

    Gropp, W.; Smith, B.

    1993-06-01

    Message passing is a common method for writing programs for distributed-memory parallel computers. Unfortunately, the lack of a standard for message passing has hampered the construction of portable and efficient parallel programs. In an attempt to remedy this problem, a number of groups have developed their own message-passing systems, each with its own strengths and weaknesses. Chameleon is a second-generation system of this type. Rather than replacing these existing systems, Chameleon is meant to supplement them by providing a uniform way to access many of these systems. Chameleon`s goals are to (a) be very lightweight (low over-head), (b) be highly portable, and (c) help standardize program startup and the use of emerging message-passing operations such as collective operations on subsets of processors. Chameleon also provides a way to port programs written using PICL or Intel NX message passing to other systems, including collections of workstations. Chameleon is tracking the Message-Passing Interface (MPI) draft standard and will provide both an MPI implementation and an MPI transport layer. Chameleon provides support for heterogeneous computing by using p4 and PVM. Chameleon`s support for homogeneous computing includes the portable libraries p4, PICL, and PVM and vendor-specific implementation for Intel NX, IBM EUI (SP-1), and Thinking Machines CMMD (CM-5). Support for Ncube and PVM 3.x is also under development.

  11. How Nature Works. Habitat Ecology Learning Program (HELP). Teachers' Manual.

    ERIC Educational Resources Information Center

    Wildlife Conservation Society, Bronx, NY.

    The goal of this guide is to address a major environmental dilemma: worldwide habitat destruction and the disappearance of species. This guide is one of six that are included in the Habitat Ecology Learning Program (HELP), a holistic life science curriculum that involves students in an in-depth study of ecology. HELP includes six teaching guides…

  12. Temperate Forests. Habitat Ecology Learning Program (HELP). Teachers' Manual.

    ERIC Educational Resources Information Center

    Wildlife Conservation Society, Bronx, NY.

    The goal of this guide is to address a major environmental dilemma: worldwide habitat destruction and the disappearance of species. This guide is one of six that are included in the Habitat Ecology Learning Program (HELP), a holistic life science curriculum that involves students in an in-depth study of ecology. HELP includes six teaching guides…

  13. Wetlands. Habitat Ecology Learning Program (HELP). Teachers' Manual.

    ERIC Educational Resources Information Center

    Wildlife Conservation Society, Bronx, NY.

    The goal of this guide is to address a major environmental dilemma: worldwide habitat destruction and the disappearance of species. This guide is one of six that are included in the Habitat Ecology Learning Program (HELP), a holistic life science curriculum that involves students in an in-depth study of ecology. HELP includes six teaching guides…

  14. Grasslands. Habitat Ecology Learning Program (HELP). Teachers' Manual.

    ERIC Educational Resources Information Center

    Wildlife Conservation Society, Bronx, NY.

    The goal of this guide is to address a major environmental dilemma: worldwide habitat destruction and the disappearance of species. This guide is one of six that are included in the Habitat Ecology Learning Program (HELP), a holistic life science curriculum that involves students in an in-depth study of ecology. HELP includes six teaching guides…

  15. Deserts. Habitat Ecology Learning Program (HELP). Teachers' Manual.

    ERIC Educational Resources Information Center

    Wildlife Conservation Society, Bronx, NY.

    The goal of this guide is to address a major environmental dilemma: worldwide habitat destruction and the disappearance of species. This guide is one of six that are included in the Habitat Ecology Learning Program (HELP), a holistic life science curriculum that involves students in an in-depth study of ecology. HELP includes six teaching guides…

  16. Targetting and guidance program documentation. [a user's manual

    NASA Technical Reports Server (NTRS)

    Harrold, E. F.; Neyhard, J. F.

    1974-01-01

    A FORTRAN computer program was developed which automatically targets two and three burn rendezvous missions and performs feedback guidance using the GUIDE algorithm. The program was designed to accept a large class of orbit specifications and to automatically choose a two or three burn mission depending upon the time alignment of the vehicle and target. The orbits may be specified as any combination of circular and elliptical orbits and may be coplanar or inclined, but must be aligned coaxially with their perigees in the same direction. The program accomplishes the required targeting by repeatedly converging successively more complex missions. It solves the coplanar impulsive version of the mission, then the finite burn coplanar mission, and finally, the full plane change mission. The GUIDE algorithm is exercised in a feedback guidance mode by taking the targeted solution and moving the vehicle state step by step ahead in time, adding acceleration and navigational errors, and reconverging from the perturbed states at fixed guidance update intervals. A program overview is presented, along with a user's guide which details input, output, and the various subroutines.

  17. Program to Optimize Simulated Trajectories (POST). Volume 2: Utilization manual

    NASA Technical Reports Server (NTRS)

    Bauer, G. L.; Cornick, D. E.; Habeger, A. R.; Petersen, F. M.; Stevenson, R.

    1975-01-01

    Information pertinent to users of the program to optimize simulated trajectories (POST) is presented. The input required and output available is described for each of the trajectory and targeting/optimization options. A sample input listing and resulting output are given.

  18. Aquifer thermal energy storage reference manual: seasonal thermal energy storage program

    SciTech Connect

    Prater, L.S.

    1980-01-01

    This is the reference manual of the Seasonal Thermal Energy Storage (STES) Program, and is the primary document for the transfer of technical information of the STES Program. It has been issued in preliminary form and will be updated periodically to include more technical data and results of research. As the program progresses and new technical data become available, sections of the manual will be revised to incorporate these data. This primary document contains summaries of: the TRW, incorporated demonstration project at Behtel, Alaska, Dames and Moore demonstration project at Stony Brook, New York, and the University of Minnesota demonstration project at Minneapolis-St. Paul, Minnesota; the technical support programs including legal/institutional assessment; economic assessment; environmental assessment; field test facilities; a compendia of existing information; numerical simulation; and non-aquifer STES concepts. (LCL)

  19. Aircraft Noise Prediction Program theoretical manual: Propeller aerodynamics and noise

    NASA Technical Reports Server (NTRS)

    Zorumski, W. E. (Editor); Weir, D. S. (Editor)

    1986-01-01

    The prediction sequence used in the aircraft noise prediction program (ANOPP) is described. The elements of the sequence are called program modules. The first group of modules analyzes the propeller geometry, the aerodynamics, including both potential and boundary-layer flow, the propeller performance, and the surface loading distribution. This group of modules is based entirely on aerodynamic strip theory. The next group of modules deals with the first group. Predictions of periodic thickness and loading noise are determined with time-domain methods. Broadband noise is predicted by a semiempirical method. Near-field predictions of fuselage surface pressrues include the effects of boundary layer refraction and scattering. Far-field predictions include atmospheric and ground effects.

  20. SSME structural computer program development. Volume 1: BOPACE theoretical manual

    NASA Technical Reports Server (NTRS)

    Vos, R. G.

    1973-01-01

    The BOPACE program (Boeing plastic analysis capability for engines) was developed to meet the need for an advanced thermal-elastic-plastic-creep structural analyzer by providing incremental relation between stresses and strains. The cumulative stress-strain relation, for temperature-dependent, or temperature independent elasticity is discussed along with the option for plane-stress analysis or plane-strain analysis. The BOPACE solution approach is summarized.

  1. General Rotorcraft Aeromechanical Stability Program (GRASP): Theory manual

    NASA Technical Reports Server (NTRS)

    Hodges, Dewey H.; Hopkins, A. Stewart; Kunz, Donald L.; Hinnant, Howard E.

    1990-01-01

    The general rotorcraft aeromechanical stability program (GRASP) was developed to calculate aeroelastic stability for rotorcraft in hovering flight, vertical flight, and ground contact conditions. GRASP is described in terms of its capabilities and its philosophy of modeling. The equations of motion that govern the physical system are described, as well as the analytical approximations used to derive them. The equations include the kinematical equation, the element equations, and the constraint equations. In addition, the solution procedures used by GRASP are described. GRASP is capable of treating the nonlinear static and linearized dynamic behavior of structures represented by arbitrary collections of rigid-body and beam elements. These elements may be connected in an arbitrary fashion, and are permitted to have large relative motions. The main limitation of this analysis is that periodic coefficient effects are not treated, restricting rotorcraft flight conditions to hover, axial flight, and ground contact. Instead of following the methods employed in other rotorcraft programs. GRASP is designed to be a hybrid of the finite-element method and the multibody methods used in spacecraft analysis. GRASP differs from traditional finite-element programs by allowing multiple levels of substructure in which the substructures can move and/or rotate relative to others with no small-angle approximations. This capability facilitates the modeling of rotorcraft structures, including the rotating/nonrotating interface and the details of the blade/root kinematics for various types. GRASP differs from traditional multibody programs by considering aeroelastic effects, including inflow dynamics (simple unsteady aerodynamics) and nonlinear aerodynamic coefficients.

  2. UMTRA Project-Level Cost Reduction/Productivity Improvement Program manual

    SciTech Connect

    1995-06-01

    Mission of the Uranium Mill Tailings Remedial Action (UMTRA) Project Cost Reduction/Productivity Improvement Program (CR/PIP) is to contribute to the UMTRA Project`s environmental restoration mission by providing the means to achieve and recognize continuous improvements and cost savings. This manual includes program definition, description of UMTRA project organizational responsibilities and interfaces with existing project functions, guidance to contractors, and definition of project-level functions.

  3. Boating Safety Training Manual.

    ERIC Educational Resources Information Center

    Coast Guard, Washington, DC.

    The training manual serves as the text for the Coast Guard's boating safety 32-hour course and for the D-8 Qualification Code Recertification Course. The manual is designed for self-study or for use with an instructor-led course. Each chapter concludes with a quiz to be used as a review of chaper content. Opening chapters review the use of the…

  4. 1983-1984 Official Wisconsin Junior Dairymen's Association Manual. Bulletin No. 4097.

    ERIC Educational Resources Information Center

    Wisconsin State Dept. of Public Instruction, Madison. Bureau for Vocational Education.

    This manual contains information needed for conducting local chapters of the Wisconsin Junior Dairymen's Association program. Included in the manual is a summary of the year's program of work, lists of previous award winners, and rules for the many contests held annually by the association. Blank forms are provided for contest entry, association…

  5. Shaking It up: How to Run the Best Club and Chapter Program

    ERIC Educational Resources Information Center

    Peterson, Erin

    2012-01-01

    Alumni clubs and chapters are powerful tools for keeping alumni connected to each other and the institution, gathering insight into what alumni want from their alma mater, and even raising money for the institution. And while alumni leaders do not need to devote a large amount of their budget to create successful groups, they do need to ensure…

  6. Aeroelastic analysis for propellers - mathematical formulations and program user's manual

    NASA Technical Reports Server (NTRS)

    Bielawa, R. L.; Johnson, S. A.; Chi, R. M.; Gangwani, S. T.

    1983-01-01

    Mathematical development is presented for a specialized propeller dedicated version of the G400 rotor aeroelastic analysis. The G400PROP analysis simulates aeroelastic characteristics particular to propellers such as structural sweep, aerodynamic sweep and high subsonic unsteady airloads (both stalled and unstalled). Formulations are presented for these expanded propeller related methodologies. Results of limited application of the analysis to realistic blade configurations and operating conditions which include stable and unstable stall flutter test conditions are given. Sections included for enhanced program user efficiency and expanded utilization include descriptions of: (1) the structuring of the G400PROP FORTRAN coding; (2) the required input data; and (3) the output results. General information to facilitate operation and improve efficiency is also provided.

  7. User's manual for UCAP: Unified Counter-Rotation Aero-Acoustics Program

    NASA Technical Reports Server (NTRS)

    Culver, E. M.; Mccolgan, C. J.

    1993-01-01

    This is the user's manual for the Unified Counter-rotation Aeroacoustics Program (UCAP), the counter-rotation derivative of the UAAP (Unified Aero-Acoustic Program). The purpose of this program is to predict steady and unsteady air loading on the blades and the noise produced by a counter-rotation Prop-Fan. The aerodynamic method is based on linear potential theory with corrections for nonlinearity associated with axial flux induction, vortex lift on the blades, and rotor-to-rotor interference. The theory for acoustics and the theory for individual blade loading and wakes are derived in Unified Aeroacoustics Analysis for High Speed Turboprop Aerodynamics and Noise, Volume 1 (NASA CR-4329). This user's manual also includes a brief explanation of the theory used for the modelling of counter-rotation.

  8. CELFE: Coupled Eulerian-Lagrangian Finite Element program for high velocity impact. Part 2: Program user's manual

    NASA Technical Reports Server (NTRS)

    Lee, C. H.

    1978-01-01

    The CELFE computer program and user's manual, together with the execution of the CELFE/NASTRAN system, are described. The execution procedure and the transfer of data between the CELFE and NASTRAN programs are controlled through the use of DATA files in the Univac 1100 system. Five data files are used to control the runstream and data transfer, and three files are used to hold the programs. These files are contained on a single tape. Changes in NASTRAN routines required by the present analysis are also discussed in this report. All the program listings, except the last two files (where the absolute and relocatable elements are stored), are included in the appendixes.

  9. Consumer Self Advocacy: A Training Program for Individuals with Disabilities and Their Families. Facilitator Manual. Revised [and] Participant Manual.

    ERIC Educational Resources Information Center

    Sablan, Velma A.

    This training package, including both a facilitator manual and a participant manual, presents information in four modules to teach self-advocacy skills to Guam individuals with disabilities and their families. Module 1 provides information on the definition of advocacy and self-advocacy, cultural influences that affect advocacy in Guam, and the…

  10. Chapter A7. Biological Indicators

    USGS Publications Warehouse

    Myers, Donna N.; Wilde, Franceska D.

    2003-01-01

    The National Field Manual for the Collection of Water-Quality Data (National Field Manual) provides guidelines and standard procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation's surface-water and ground-water resources. This chapter of the manual includes procedures for the (1) determination of biochemical oxygen demand using a 5-day bioassay test; (2) collection, identification, and enumeration of fecal indicator bacteria; (3) collection of samples and information on two laboratory methods for fecal indicator viruses (coliphages); and (4) collection of samples for protozoan pathogens. Each chapter of the National Field Manual is published separately and revised periodically. Newly published and revised chapters are posted on the World Wide Web on the USGS page 'National Field Manual for the Collection of Water-Quality Data.' The URL for this page is http://pubs.water.usgs.gov/twri9A/ (accessed November 25, 2003).

  11. Computer user's manual for a generalized curve fit and plotting program

    NASA Technical Reports Server (NTRS)

    Schlagheck, R. A.; Beadle, B. D., II; Dolerhie, B. D., Jr.; Owen, J. W.

    1973-01-01

    A FORTRAN coded program has been developed for generating plotted output graphs on 8-1/2 by 11-inch paper. The program is designed to be used by engineers, scientists, and non-programming personnel on any IBM 1130 system that includes a 1627 plotter. The program has been written to provide a fast and efficient method of displaying plotted data without having to generate any additions. Various output options are available to the program user for displaying data in four different types of formatted plots. These options include discrete linear, continuous, and histogram graphical outputs. The manual contains information about the use and operation of this program. A mathematical description of the least squares goodness of fit test is presented. A program listing is also included.

  12. Using a profiling process to insure program quality: Volume I - a self-instructional manual

    SciTech Connect

    Kaser, J.S.; Roody, D.S.; Raizen, S.A.

    1996-11-01

    Between 1990 and 1995 the U.S. Department of Energy (DOE) and the National Center for Improving Science Education (National Center) developed a system for ongoing evaluation of K-12 educational programs in the DOE-supported national energy Laboratories. As part of the formative evaluation component of this collaborative endeavor, field staff in the Laboratories began creating profiles of their programs. However, many individuals within DOE Headquarters were not familiar with this profiling process and were unprepared to use the valuable information that the profiles generated. This manual was produced to orient Headquarters staff to profiling. It focuses on how Headquarters staff can use the profiling process to help their funded programs establish and/or maintain high quality. Its purpose, then, is not to train Headquarters staff to become proficient in profiling, but to show them how to draw on the Laboratories` use of profiling to bring about program improvement. Profiling is the process of systematically examining and describing a program`s elements against a set of components that define Effective Practice. The instrument used to capture the data for analysis is called a template, and most of this manual focuses on the templates and how to read and interpret them. However, since it is important to understand these data in context, the authors also describe what should accompany each template in a complete profiling packet and offer guidelines for reviewing complete packets and providing feedback to program managers.

  13. STICAP: A linear circuit analysis program with stiff systems capability. Volume 1: Theory manual. [network analysis

    NASA Technical Reports Server (NTRS)

    Cooke, C. H.

    1975-01-01

    STICAP (Stiff Circuit Analysis Program) is a FORTRAN 4 computer program written for the CDC-6400-6600 computer series and SCOPE 3.0 operating system. It provides the circuit analyst a tool for automatically computing the transient responses and frequency responses of large linear time invariant networks, both stiff and nonstiff (algorithms and numerical integration techniques are described). The circuit description and user's program input language is engineer-oriented, making simple the task of using the program. Engineering theories underlying STICAP are examined. A user's manual is included which explains user interaction with the program and gives results of typical circuit design applications. Also, the program structure from a systems programmer's viewpoint is depicted and flow charts and other software documentation are given.

  14. ASTROP2 users manual: A program for aeroelastic stability analysis of propfans

    NASA Technical Reports Server (NTRS)

    Narayanan, G. V.; Kaza, K. R. V.

    1991-01-01

    A user's manual is presented for the aeroelastic stability and response of propulsion systems computer program called ASTROP2. The ASTROP2 code preforms aeroelastic stability analysis of rotating propfan blades. This analysis uses a two-dimensional, unsteady cascade aerodynamics model and a three-dimensional, normal-mode structural model. Analytical stability results from this code are compared with published experimental results of a rotating composite advanced turboprop model and of nonrotating metallic wing model.

  15. Finding Federal Money for Children's Services: Financing Services for Children through Title XX and Other Programs. Manual 1.

    ERIC Educational Resources Information Center

    Copeland, William C.

    This is the first manual of a 4-part series on how to find, obtain, contract for and manage Federal money for children's services. The first manual concentrates on ways to locate funds for new and existing programs. Emphasis is on Title XX of the Social Security Act, but attention is given also to alternative sources where Title XX funds are not…

  16. Using Microsoft Access XP: A How-To-Do-It Manual for Librarians. How-To-Do-It Manuals for Librarians, Number 120.

    ERIC Educational Resources Information Center

    Butler, E. Sonny; Napier, Timothy R.

    This manual is designed to assist librarians in programming unique database applications that meet specific library needs. Chapter 1 goes over the basic functions of working with Windows, describes terms such as multitasking, and shows how to use the menu and tool bars. Chapter 2 covers the basics, defines some useful terms, and presents the steps…

  17. Manual development: A strategy for identifying core components of integrated health programs.

    PubMed

    Mooss, Angela; Hartman, Megan; Ibañez, Gladys

    2015-12-01

    Integrated care models are gaining popularity as a clinical strategy to reduce costs and improve client outcomes; however, implementation of such complex models requires an understanding of programmatic core components essential to producing positive outcomes. To promote this understanding, evaluators can work collaboratively with organization staff and leaderships to gather information on program implementation, adaptations, organizational buy-in, and project outcomes. In 2011, SAMHSA funded two Miami health clinics to implement integrated care models in co-located settings. Changes in the federal healthcare landscape, non-Medicaid expansion for Florida, and the complexity of projects goals led evaluators to facilitate a core component review as part of evaluation. A manual was developed throughout the project and captured a description, adaptations, inputs needed, lessons learned, and sustainability for each integrated care component. To increase chances for program success, evaluators should institute a method to better define core components of new programs and implementation adaptations, while keeping program replication in mind. Breaking down the program structurally gave the evaluation utility for stakeholders, and ultimately served as a resource for organizations to better understand their program model. The manual also continues to serve as a dissemination and replication source for other providers looking to implement integrated care.

  18. Military construction program economic analysis manual: Text and appendixes: Hazardous Waste Remedial Actions Program. [Contains glossary

    SciTech Connect

    Not Available

    1987-12-01

    This manual enables the US Air Force to comprehensively and systematically analyze alternative approaches to meeting its military construction requirements. The manual includes step-by-step procedures for completing economic analyses for military construction projects, beginning with determining if an analysis is necessary. Instructions and a checklist of the tasks involved for each step are provided; and examples of calculations and illustrations of completed forms are included. The manual explains the major tasks of an economic analysis, including identifying the problem, selecting realistic alternatives for solving it, formulating appropriate assumptions, determining the costs and benefits of the alternatives, comparing the alternatives, testing the sensitivity of major uncertainties, and ranking the alternatives. Appendixes are included that contain data, indexes, and worksheets to aid in performing the economic analyses. For reference, Volume 2 contains sample economic analyses that illustrate how each form is filled out and that include a complete example of the documentation required. 6 figs., 12 tabs.

  19. New FORTRAN computer programs to acquire and process isotopic mass spectrometric data: Operator`s manual

    SciTech Connect

    Smith, D.H.; McKown, H.S.

    1993-09-01

    This TM is one of a pair that describes ORNL-developed software for acquisition and processing of isotope ratio mass spectral data. This TM is directed at the laboratory analyst. No technical knowledge of the programs and programming is required. It describes how to create and edit files, how to acquire and process data, and how to set up files to obtain the desired results. The aim of this TM is to serve as a utilitarian instruction manual, a {open_quotes}how to{close_quotes} approach rather than a {open_quotes}why?{close_quotes}

  20. ANOPP programmer's reference manual for the executive System. [aircraft noise prediction program

    NASA Technical Reports Server (NTRS)

    Gillian, R. E.; Brown, C. G.; Bartlett, R. W.; Baucom, P. H.

    1977-01-01

    Documentation for the Aircraft Noise Prediction Program as of release level 01/00/00 is presented in a manual designed for programmers having a need for understanding the internal design and logical concepts of the executive system software. Emphasis is placed on providing sufficient information to modify the system for enhancements or error correction. The ANOPP executive system includes software related to operating system interface, executive control, and data base management for the Aircraft Noise Prediction Program. It is written in Fortran IV for use on CDC Cyber series of computers.

  1. The Montana Rivers Information System: Edit/entry program user`s manual

    SciTech Connect

    Not Available

    1992-07-01

    The Montana Rivers Information System (MRIS) was initiated to assess the state`s fish, wildlife, and recreation value; and natural cultural and geologic features. The MRIS is now a set of data bases containing part of the information in the Natural Heritage Program natural features and threatened and endangered species data bases. The purpose of this User`s Manual is to: (1) describe to the user how to maintain the MRIS database of their choice by updating, changing, deleting, and adding records using the edit/entry programs; and (2) provide to the user all information and instructions necessary to complete data entry into the MRIS databases.

  2. DEUS computer evaluation model. Volume 2. Program user's manual. Final report

    SciTech Connect

    Anand, A.K.; Hall, E.W.; Oplinger, J.L.; Priestley, R.R.; Sweeney, J.H. III

    1982-12-01

    The DEUS (Dual Energy Use Systems) Analysis of Cogeneration System was undertaken by EPRI to evaluate industrial cogeneration from the utility perspective and to determine the extent to which potential benefits would accure to a utility in representative site specific industrial applications. A computer program was developed that compares a cogeneration system to a noncogeneration system in an industry with specified heat and power requirements. The economic comparison is based on user specified utility rate data, which includes industrial rates and rates for purchases of electricity from cogenerators under Section 210 of the Public Utility Regulatory Policies Act (PURPA rates). The industrial heat and power requirements as well as the utility rate data can be specified in a time varying profile for up to 36 periods in a year. For use as a screening tool, a data base of performance and cost for a noncogeneration and several cogeneration systems is built into the program. System part load performance and applicable fuel characteristics are included. For application studies, the user must determine and specify the performance and cost characteristics for particular systems. Based on system capital and operating costs, the economics are determined for industrial, utility, and third-party ownership. The computer program methodology is described in the Program Descriptive Manual for Computer Evalution of Dual Energy Use Systems, RP 1276-4. this report is the computer program user's manual.

  3. Conservation Education: A Planning Guide. Manual Series M-23.

    ERIC Educational Resources Information Center

    Wood, David S.; Wood, Diane Walton

    The purpose of this manual is to help individuals and groups design and implement conservation education programs that will effectively bring about improved environmental management. The chapters describe: (1) how to gather environmental and social data for designing appropriate education programs; (2) how to judge the strengths and weaknesses of…

  4. Diversified Cooperative Training. Diversified Cooperative Health Occupations. Manual of Operation.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Vocational and Adult Education.

    This manual is designed to assist school personnel, employers, parents/guardians, and students in understanding the policies and procedures required to operate effective diversified cooperative training (DCT) and diversified cooperative health occupations (DCHO) programs. Chapter I describes DCT/DCHO programs, their structure, types of program…

  5. New Directions for Rural Women: A Workshop Leader's Manual.

    ERIC Educational Resources Information Center

    Ronan, Marian

    A field tested workshop program to prepare rural women for education and job opportunities is described in this comprehensive manual for workshop leaders. An introductory chapter states program goals and philosophy and covers planning and implementing the workshops; topics include staff selection, publicity and recruiting, materials, workshop size…

  6. High School E.C.I.A. Chapter 1, Part B, Institutionalized Facilities Program 1989-90. State Report. OREA Report.

    ERIC Educational Resources Information Center

    New York City Board of Education, Brooklyn, NY. Office of Research, Evaluation, and Assessment.

    This report describes and evaluates high school programs funded under Chapter 1, Part B, of the Education Consolidation and Improvement Act (ECIA) and administered by the Institutionalized Facilities Program of the New York City Public Schools in 1989-90. The program is designed to address the educational needs of students in facilities for…

  7. Strengthening Skills for Success: A Manual To Help Parents Support Their Psychiatrically Disabled Youth's Community Employment.

    ERIC Educational Resources Information Center

    Cook, Judith A.; And Others

    The manual provides information and suggestions to parents of youth with psychiatric disabilities, based on the program at Thresholds, a psychiatric rehabilitation center in Chicago, Illinois. The manual includes case examples, exercises, and space for parent responses. Chapters have the following titles and topics: "The Importance to You of Your…

  8. National Household Education Surveys Program of 2012: Data File User's Manual. Parent and Family Involvement in Education Survey. Early Childhood Program Participation Survey. NCES 2015-030

    ERIC Educational Resources Information Center

    McPhee, C.; Bielick, S.; Masterton, M.; Flores, L.; Parmer, R.; Amchin, S.; Stern, S.; McGowan, H.

    2015-01-01

    The 2012 National Household Education Surveys Program (NHES:2012) Data File User's Manual provides documentation and guidance for users of the NHES:2012 data files. The manual provides information about the purpose of the study, the sample design, data collection procedures, data processing procedures, response rates, imputation, weighting and…

  9. Administrative Procedures Manual for Instructional Program in Medical Vocabulary and Medical Chart Abstracting for Tumor Registrars. Revised 1972.

    ERIC Educational Resources Information Center

    Human Resources Research Organization, Alexandria, VA.

    The manual provides the information required to administer the training program. The first three sections describe: (1) the requirements for and objectives of the tumor registrar training program; (2) the format (incorporating programed instruction and self-scoring practical exercises), student evaluation techniques, and contents of the…

  10. Designing an Academic Project Management Program: A Collaboration between a University and a PMI Chapter

    ERIC Educational Resources Information Center

    Poston, Robin S.; Richardson, Sandra M.

    2011-01-01

    The demand for project management skills in industry is increasing resulting in a higher demand for project management educational programs. Universities are addressing industry demand by developing project management courses, degree offerings and certificate programs that focus on both technical and general project management skills. While…

  11. The Radiological Safety Analysis Computer Program (RSAC-5) user`s manual. Revision 1

    SciTech Connect

    Wenzel, D.R.

    1994-02-01

    The Radiological Safety Analysis Computer Program (RSAC-5) calculates the consequences of the release of radionuclides to the atmosphere. Using a personal computer, a user can generate a fission product inventory from either reactor operating history or nuclear criticalities. RSAC-5 models the effects of high-efficiency particulate air filters or other cleanup systems and calculates decay and ingrowth during transport through processes, facilities, and the environment. Doses are calculated through the inhalation, immersion, ground surface, and ingestion pathways. RSAC+, a menu-driven companion program to RSAC-5, assists users in creating and running RSAC-5 input files. This user`s manual contains the mathematical models and operating instructions for RSAC-5 and RSAC+. Instructions, screens, and examples are provided to guide the user through the functions provided by RSAC-5 and RSAC+. These programs are designed for users who are familiar with radiological dose assessment methods.

  12. Storm and combined sewer overflow: An overview of EPA's Research Program. Book chapter

    SciTech Connect

    Field, R.

    1993-01-01

    The report represents an overview of the EPA's Storm and Combined Sewer Pollution Control Research Program performed over a 20-year period beginning with the mid-1960s. It covers Program involvements in the development of a diverse technology including pollution-problem assessment/solution methodology and associated instrumentation and stormwater management models, best management practices, erosion control, infiltration/inflow, control, control-treatment technology and the associated sludge and solids residuals handling and many others.

  13. FDA (food and drug administration) compliance program guidance manual (fy 84). Section 6. Radiological health. Updates. Irregular repts

    SciTech Connect

    Not Available

    1984-01-01

    The standing order allows one to obtain updates to Section VI of the Compliance Program Guidance Manual which provides plans and instructions to Field operatons which are surveillance and/or compliance oriented and provide needed direction from Headquarters Offices and Bureaus in accomplishing FDA's regulatory obligations for those products monitored for radiation. This section also includes the concept to the Manual and miscellaneous material relating to compliance functions.

  14. Louis D. Brandeis High School. New York State Chapter 720 Bilingual Program. O.E.E. Evaluation Report, 1981-1982.

    ERIC Educational Resources Information Center

    Cochran, Effie Papatzikou; And Others

    The Chapter 720 bilingual program located at Louis D. Brandeis High School in New York City, seeks to provide specialized Spanish and English instruction in mathematics and language development for 250 Spanish speaking students. This report briefly describes the program's goals and objectives, its organization, and instructional and…

  15. A fast reactor transient analysis methodology for PCs. Volume 2, LTC program manual

    SciTech Connect

    Ott, K.O.

    1991-10-01

    This Manual describes a PC program for LMR Transient Calculations, LTC, written in GW-BASIC. It calculates the power and temperature trajectories for unscrammed TOP and LOHS transients. The LOF transient treatment is not operational in the GW-BASIC program because of storage limitations. The corresponding mathematical model, which allows a rapid treatment of the kinetics and the various feedback effects, is described in Ref. 1. It is briefly reviewed in Sec. 1. The program structure is outlined in Sec. 2, followed by a more detailed description in Sec. 3. Computational details are presented in Appendix A. A complete listing of the GW-BASIC program is given in Appendix B. Appendix C shows input-echo and output for a TOP sample problem, and Appendix D is a Glossary of all quantities used in the LTC program. The limitations of the GW-BASIC storage (to about 60K) are removed if it is run within Quick-BASIC. This then allows the extension of this program to treat LOF transients. Running LTC in Quick-BASIC permits also larger ``Dimensions`` for TOP and LOHS transients.

  16. ENERGY EFFICIENT BUILDINGS PROGRAM Chapter from the Energy and Environment Division Annual Report 1980

    SciTech Connect

    Authors, Various

    1981-05-01

    The aim of the Energy Efficient Buildings Program is to conduct theoretical and experimental research on various aspects of building technology that will permit such gains in energy efficiency without decreasing occupants' comfort or adversely affecting indoor air quality. To accomplish this goal, we have developed five major research groups. The foci of these groups are: Energy Performance of Buildings; Building Ventilation and Indoor Air Quality; Building Energy Analysis; Energy Efficient Windows and Lighting; and Building Energy Data, Analysis and Demonstration.

  17. General Rotorcraft Aeromechanical Stability Program (GRASP) version 1.03: User's manual

    NASA Technical Reports Server (NTRS)

    Hopkins, A. Stewart; Kunz, Donald L.

    1988-01-01

    The Rotorcraft Dynamics Division, Aeroflightdynamics Directorate, U.S. Army Aviation Research and Technology Activity has developed the General Rotorcraft Aeromechanical Stability Program (GRASP) to perform calculations that will assess the stability of rotorcraft in hovering flight and ground contact conditions. The program is designed to be state-of-the-art, hybrid, finite-element/multibody code that can be applied to all existing and future helicopter configurations. While GRASP was specifically designed to solve rotorcraft stability problems, its innovative structure and formulation allow for application to a wide range of structures. This manual describes the preparation of the input file required by Version 1.03 of GRASP, the procedures used to invoke GRASP on the NASA Ames Research Center CRAY X-MP 48 computer, and the interpretation of the output produced by GRASP. The parameters used by the input file are defined, and summaries of the input file and the job control language are included.

  18. Description of a computer program to calculate reacting supersonic internal flow fields with shock waves using viscous characteristics: Program manual and sample calculations

    NASA Technical Reports Server (NTRS)

    Cavalleri, R. J.; Agnone, A. M.

    1972-01-01

    A computer program for calculating internal supersonic flow fields with chemical reactions and shock waves typical of supersonic combustion chambers with either wall or mid-stream injectors is described. The usefulness and limitations of the program are indicated. The program manual and listing are presented along with a sample calculation.

  19. REFERENCE MANUAL FOR RASSMIT VERSION 2.1: SUB-SLAB DEPRESSURIZATION SYSTEM DESIGN PERFORMANCE SIMULATION PROGRAM

    EPA Science Inventory

    The report is a reference manual for RASSMlT Version 2.1, a computer program that was developed to simulate and aid in the design of sub-slab depressurization systems used for indoor radon mitigation. The program was designed to run on DOS-compatible personal computers to ensure ...

  20. Manned systems utilization analysis (study 2.1). Volume 4: Program manual and users guide for the LOVES computer code

    NASA Technical Reports Server (NTRS)

    Wray, S. T., Jr.

    1975-01-01

    Information necessary to use the LOVES computer program in its existing state or to modify the program to include studies not properly handled by the basic model is provided. A users guide, a programmers manual, and several supporting appendices are included.

  1. LAW ENFORCEMENT OFFICER TRAINING, BASIC COURSE, UNIT I, A UNIT OF THE OHIO LAW ENFORCEMENT OFFICERS' TRAINING PROGRAM, LEARNER'S MANUAL.

    ERIC Educational Resources Information Center

    REESE, ROBERT M.; STOVER, WILBUR F.

    STUDENTS MAY USE THIS MANUAL IN A TRAINING PROGRAM FOR INSERVICE LAW ENFORCEMENT OFFICERS AND RECRUITS. IT WAS DEVELOPED BY A STATEWIDE COMMITTEE OF STATE LAW ENFORCEMENT TRAINING CONSULTANTS, SPECIALISTS, AND AN ADVISORY COMMITTEE AND WAS TESTED BY A SUBJECT-MATTER SPECIALIST IN A PILOT-CLASS STUDY. THE TRAINING PROGRAM IS DESIGNED TO PROVIDE LAW…

  2. LAW ENFORCEMENT OFFICER TRAINING, BASIC COURSE, UNIT II, A UNIT OF THE OHIO LAW ENFORCEMENT OFFICERS' TRAINING PROGRAM, LEARNER'S MANUAL.

    ERIC Educational Resources Information Center

    REESE, ROBERT M.; AND OTHERS

    STUDENTS MAY USE THIS MANUAL IN A LAW ENFORCEMENT TRAINING PROGRAM FOR INSERVICE LAW ENFORCEMENT OFFICERS AND RECRUITS. IT WAS DEVELOPED BY A STATEWIDE COMMITTEE OF LAW ENFORCEMENT TRAINING CONSULTANTS, SPECIALISTS, AND AN ADVISORY COMMITTEE AND WAS TESTED BY A SUBJECT MATTER SPECIALIST IN A PILOT-CLASS STUDY. THE PROGRAM IS DESIGNED TO PROVIDE…

  3. Cost-Benefit Analysis for ECIA Chapter 1 and State DPPF Programs Comparing Groups Receiving Regular Program Instruction and Groups Receiving Computer Assisted Instruction/Computer Management System (CAI/CMS). 1986-87.

    ERIC Educational Resources Information Center

    Chamberlain, Ed

    A cost benefit study was conducted to determine the effectiveness of a computer assisted instruction/computer management system (CAI/CMS) as an alternative to conventional methods of teaching reading within Chapter 1 and DPPF funded programs of the Columbus (Ohio) Public Schools. The Chapter 1 funded Compensatory Language Experiences and Reading…

  4. The development of an Ada programming support environment database: SEAD (Software Engineering and Ada Database), user's manual

    NASA Technical Reports Server (NTRS)

    Liaw, Morris; Evesson, Donna

    1988-01-01

    This is a manual for users of the Software Engineering and Ada Database (SEAD). SEAD was developed to provide an information resource to NASA and NASA contractors with respect to Ada-based resources and activities that are available or underway either in NASA or elsewhere in the worldwide Ada community. The sharing of such information will reduce the duplication of effort while improving quality in the development of future software systems. The manual describes the organization of the data in SEAD, the user interface from logging in to logging out, and concludes with a ten chapter tutorial on how to use the information in SEAD. Two appendices provide quick reference for logging into SEAD and using the keyboard of an IBM 3270 or VT100 computer terminal.

  5. PROGRAM VSAERO: A computer program for calculating the non-linear aerodynamic characteristics of arbitrary configurations: User's manual

    NASA Technical Reports Server (NTRS)

    Maskew, B.

    1982-01-01

    VSAERO is a computer program used to predict the nonlinear aerodynamic characteristics of arbitrary three-dimensional configurations in subsonic flow. Nonlinear effects of vortex separation and vortex surface interaction are treated in an iterative wake-shape calculation procedure, while the effects of viscosity are treated in an iterative loop coupling potential-flow and integral boundary-layer calculations. The program employs a surface singularity panel method using quadrilateral panels on which doublet and source singularities are distributed in a piecewise constant form. This user's manual provides a brief overview of the mathematical model, instructions for configuration modeling and a description of the input and output data. A listing of a sample case is included.

  6. Program document for Energy Systems Optimization Program 2 (ESOP2). Volume 1: Engineering manual

    NASA Technical Reports Server (NTRS)

    Hamil, R. G.; Ferden, S. L.

    1977-01-01

    The Energy Systems Optimization Program, which is used to provide analyses of Modular Integrated Utility Systems (MIUS), is discussed. Modifications to the input format to allow modular inputs in specified blocks of data are described. An optimization feature which enables the program to search automatically for the minimum value of one parameter while varying the value of other parameters is reported. New program option flags for prime mover analyses and solar energy for space heating and domestic hot water are also covered.

  7. Solar Energy Program: Chapter from the Energy and EnvironmentalDivision Annual Report 1980

    SciTech Connect

    Energy and Environment Division

    1981-03-01

    Solar energy has become a major alternative for supplying a substantial fraction of the nation's future energy needs. The U.S. Department of Energy (DOE) supports activities ranging from the demonstration of existing technology to research on future possibilities. At Lawrence Berkeley Laboratory (LBL), projects are in progress that span a wide range of activities, with the emphasis on research to extend the scientific basis for solar energy applications, and on preliminary development of new approaches to solar energy conversion. To assess various solar applications, it is important to quantify the solar resource. Special instruments have been developed and are now in use to measure both direct solar radiation and circum-solar radiation, i.e., the radiation from near the sun resulting from the scattering of sunlight by small particles in the atmosphere. These measurements serve to predict the performance of solar designs that use focusing collectors employing mirrors or lenses to concentrate the sunlight. Efforts have continued at a low level to assist DOE in demonstrating existing solar technology by providing the San Francisco Operations Office (SAN) with technical support for its management of commercial-building solar demonstration projects. Also, a hot water and space-heating system has been installed on an LBL building as part of the DOE facilities Solar Demonstration Program. LBL continues to provide support for the DOE Appropriate Energy Technology grants program. Evaluations are made of the program's effectiveness by, for example, estimating the resulting potential energy savings. LBL also documents innovative features and improvements in economic feasibility as compared to existing conventional systems or applications. In the near future, we expect that LBL research will have a substantial impact in the areas of solar heating and cooling. Conventional and new types of high-performance absorption air conditioners are being developed that are air-cooled and

  8. A Piano Training Program to Improve Manual Dexterity and Upper Extremity Function in Chronic Stroke Survivors

    PubMed Central

    Villeneuve, Myriam; Penhune, Virginia; Lamontagne, Anouk

    2014-01-01

    Objective: Music-supported therapy was shown to induce improvements in motor skills in stroke survivors. Whether all stroke individuals respond similarly to the intervention and whether gains can be maintained over time remain unknown. We estimated the immediate and retention effects of a piano training program on upper extremity function in persons with chronic stroke. Methods: Thirteen stroke participants engaged in a 3-week piano training comprising supervised sessions (9 × 60 min) and home practice. Fine and gross manual dexterity, movement coordination, and functional use of the upper extremity were assessed at baseline, pre-intervention, post-intervention, and at a 3-week follow-up. Results: Significant improvements were observed for all outcomes at post-intervention and follow-up compared to pre-intervention scores. Larger magnitudes of change in manual dexterity and functional use of the upper extremity were associated with higher initial levels of motor recovery. Conclusion: Piano training can result in sustainable improvements in upper extremity function in chronic stroke survivors. Individuals with a higher initial level of motor recovery at baseline appear to benefit the most from this intervention. PMID:25202258

  9. Users manual for an expert system (HSPEXP) for calibration of the hydrological simulation program; Fortran

    USGS Publications Warehouse

    Lumb, A.M.; McCammon, R.B.; Kittle, J.L.

    1994-01-01

    Expert system software was developed to assist less experienced modelers with calibration of a watershed model and to facilitate the interaction between the modeler and the modeling process not provided by mathematical optimization. A prototype was developed with artificial intelligence software tools, a knowledge engineer, and two domain experts. The manual procedures used by the domain experts were identified and the prototype was then coded by the knowledge engineer. The expert system consists of a set of hierarchical rules designed to guide the calibration of the model through a systematic evaluation of model parameters. When the prototype was completed and tested, it was rewritten for portability and operational use and was named HSPEXP. The watershed model Hydrological Simulation Program--Fortran (HSPF) is used in the expert system. This report is the users manual for HSPEXP and contains a discussion of the concepts and detailed steps and examples for using the software. The system has been tested on watersheds in the States of Washington and Maryland, and the system correctly identified the model parameters to be adjusted and the adjustments led to improved calibration.

  10. SOLAR ENERGY PROGRAM: CHAPTER FROM THE ENERGY AND ENVIRONMENT ANNUAL REPORT 1979

    SciTech Connect

    Authors, Various

    1980-10-01

    Solar energy has become a major alternative for supplying a substantial fraction of the nation's future energy needs. The Department of Energy (DOE) supports activities ranging from the demonstration of existing technology to research on future possibilities; and at LBL projects are in progress which span that range of activities. To assess various solar applications it is important to quantify the solar resource. In one project, LBL is cooperating with the Pacific Gas and Electric Company in the implementation and operation of a solar radiation data collection network in northern California. Special instruments have been developed and are now in use to measure the solar and circumsolar (around the sun) radiation. These measurements serve to predict the performance of solar designs which use focusing collectors (mirrors or lenses) to concentrate the sunlight. Efforts are being made to assist DOE in demonstrating existing solar technology. DOE's San Francisco Operations Office (SAN) has been given technical support for its management of commercial-building solar demonstration projects. The installation of a solar hot water and space heating system on an LBL building established model techniques and procedures as part of the DOE Facilities Solar Demonstration Program. Technical support is also provided for SAN in a DOE small scale technology pilot program in which grants are awarded to individuals and organizations to develop and demonstrate solar technologies appropriate to small scale use. In the near future it is expected that research will exert a substantial impact in the areas of solar heating and cooling. An absorption air conditioner is being developed that is air cooled yet suitable for use with temperatures available from flat plate collectors. With inexpensive but sophisticated micro-electronics to control their operation, the performance of many-component solar heating and cooling systems may be improved, and work is under way to develop such a controller

  11. Small Scale Beekeeping. Appropriate Technologies for Development. Manual M-17.

    ERIC Educational Resources Information Center

    Gentry, Curtis

    This manual is designed to assist Peace Corps volunteers in the development and implementation of small-scale beekeeping programs as a tool for development. Addressed in the individual chapters are bees and humans; project planning; the types and habits of bees; the essence of beekeeping; bee space and beehives; intermediate technology beekeeping;…

  12. The Waiter and Waitress Training Manual. Revised Edition.

    ERIC Educational Resources Information Center

    Mitchell, Barbara J.

    This manual is intended for use in pre-employment or upgrading training programs for persons who are planning to work or are presently working in the hotel and restaurant food service industry. Eleven chapters cover interpersonal relationships with employers, fellow employees, and customers; grooming and personal hygiene; sanitary food handling;…

  13. Mission Possible: Spy a Book! 2003 Texas Reading Club Manual.

    ERIC Educational Resources Information Center

    Heard, Adriana Flores; Ingham, Donna; McDermott, Joe; Meyer, Sally; Parrish, Leila; Schill, Victor; Trevino, Rose

    The purpose of this manual for the 2003 Texas Reading Club, "Mission Possible: Spy a Book!" is to assist library staff who serve youth by suggesting ideas for programs that will attract children to the library. The following chapters are included: (1) Marketing, Cooperation and PR; (2) Serving Children with Disabilities; (3) Theme Songs; (4)…

  14. New Careers: The Teacher Aide. A Manual for Trainers.

    ERIC Educational Resources Information Center

    Steinberg, Sheldon S.; Fishman, Jacob R.

    This manual is intended for use by trainers of teacher aides in New Careers programs (which focus on training the unemployed and/or underemployed for entry-level placement as nonprofessionals in human service occupations). An introductory chapter considers the qualifications of the training team, qualifications of the trainee, the function and job…

  15. A Manual for Developing Successful Projects. Company School Collaboration.

    ERIC Educational Resources Information Center

    American Council of Life Insurance, Washington, DC.

    This manual is designed to help company officials who are responsible for planning, implementing, and coordinating company and school collaborative programs. Addressed in the individual chapters of the guide are the following topics: the benefits and principles of establishing company and school linkages; procedures for determining a company's…

  16. PLOT3D user's manual

    NASA Technical Reports Server (NTRS)

    Walatka, Pamela P.; Buning, Pieter G.; Pierce, Larry; Elson, Patricia A.

    1990-01-01

    PLOT3D is a computer graphics program designed to visualize the grids and solutions of computational fluid dynamics. Seventy-four functions are available. Versions are available for many systems. PLOT3D can handle multiple grids with a million or more grid points, and can produce varieties of model renderings, such as wireframe or flat shaded. Output from PLOT3D can be used in animation programs. The first part of this manual is a tutorial that takes the reader, keystroke by keystroke, through a PLOT3D session. The second part of the manual contains reference chapters, including the helpfile, data file formats, advice on changing PLOT3D, and sample command files.

  17. Users manual for the IMA program. Appendix C: Profile design program listing

    NASA Technical Reports Server (NTRS)

    1991-01-01

    The source code for the Profile Design Program (PDP) for the Impulsive Mission Analysis (IMA) program is divided into several files. In a similar manner, the FORTRAN listings of the PDP's subroutines and function routines are organized into several groups in this appendix. Within each group, the FORTRAN listings are ordered alphabetically by routine name. Names and brief descriptions of each routine are listed in the same order as the Fortran listings.

  18. Tribal Aging Programs: A Basic Guide.

    ERIC Educational Resources Information Center

    National Indian Council on Aging, Albuquerque, NM.

    A national training session for administrators of tribal aging programs held by the National Indian Council on Aging in November 1979 was the basis for the training manual. The seven chapter titles reflect workshop topics with the text of each chapter incorporating material presented in the workshops and examples of model programs on reservations.…

  19. A Resource Manual for the Development and Evaluation of Special Programs for Exceptional Students. Volume V-D: Techniques of Precision Teaching. Part 1: Training Manual, Part 2: Math Basic Skills Curriculum, Part 3: Reading Basic Skills Curriculum.

    ERIC Educational Resources Information Center

    Diviaio, Linda G.; Hefferan, Marilyn P.

    This document contains a training manual and reading and math basic skills curricula for use in specific learning disability programs and/or with educably mentally handicapped and emotionally handicapped students. The training manual is intended to help special education teachers understand and use precision teaching. A brief history of the…

  20. Education and Human Resources Sector Assessment Manual.

    ERIC Educational Resources Information Center

    Pigozzi, Mary Joy; Cieutat, Victor J.

    This manual endorses and adopts the sector-assessment approach for planning and managing the allocation of educational resources. Chapter 1 presents the manual's goals. Chapter 2 describes the manual's content and information sources, explains the term "sector assessment," identifies the groups that benefit from recommendations made by the…

  1. Program manual for HILTOP, a heliocentric interplanetary low thrust trajectory optimization program. Part 1: User's guide

    NASA Technical Reports Server (NTRS)

    Mann, F. I.; Horsewood, J. L.

    1974-01-01

    A performance-analysis computer program, that was developed explicitly to generate optimum electric propulsion trajectory data for missions of interest in the exploration of the solar system is presented. The program was primarily designed to evaluate the performance capabilities of electric propulsion systems, and in the simulation of a wide variety of interplanetary missions. A numerical integration of the two-body, three-dimensional equations of motion and the Euler-Lagrange equations was used in the program. Transversality conditions which permit the rapid generation of converged maximum-payload trajectory data, and the optimization of numerous other performance indices for which no transversality conditions exist are included. The ability to simulate constrained optimum solutions, including trajectories having specified propulsion time and constant thrust cone angle, is also in the program. The program was designed to handle multiple-target missions with various types of encounters, such as rendezvous, stopover, orbital capture, and flyby. Performance requirements for a variety of launch vehicles can be determined.

  2. User's manual for University of Arizona APART program (Analysis Program - Arizona Radiation Trace)

    NASA Technical Reports Server (NTRS)

    Breault, R. P.

    1975-01-01

    A description and operating instructions for the Analysis Program Arizona Radiation Trace (APART) are given. This is a computer program that is able to efficiently and accurately predict the off-axis rejection characteristics of unwanted stray radiation for complex rotationally symmetric optical systems. The program first determines the critical objects or areas that scatter radiation to the image plane either directly or through imaging elements: this provides the opportunity to modify, if necessary, the design so that the number of critical areas seen by the image plane is reduced or the radiation to these critical areas is minimized. Next, the power distribution reaching the image plane and a sectional power map of all internal surfaces are computed. Angular information is also provided that relates the angle by which the radiation came into a surface to the angle by which the radiation is scattered out of the surface.

  3. NEQAIR96,Nonequilibrium and Equilibrium Radiative Transport and Spectra Program: User's Manual

    NASA Technical Reports Server (NTRS)

    Whiting, Ellis E.; Park, Chul; Liu, Yen; Arnold, James O.; Paterson, John A.

    1996-01-01

    This document is the User's Manual for a new version of the NEQAIR computer program, NEQAIR96. The program is a line-by-line and a line-of-sight code. It calculates the emission and absorption spectra for atomic and diatomic molecules and the transport of radiation through a nonuniform gas mixture to a surface. The program has been rewritten to make it easy to use, run faster, and include many run-time options that tailor a calculation to the user's requirements. The accuracy and capability have also been improved by including the rotational Hamiltonian matrix formalism for calculating rotational energy levels and Hoenl-London factors for dipole and spin-allowed singlet, doublet, triplet, and quartet transitions. Three sample cases are also included to help the user become familiar with the steps taken to produce a spectrum. A new user interface is included that uses check location, to select run-time options and to enter selected run data, making NEQAIR96 easier to use than the older versions of the code. The ease of its use and the speed of its algorithms make NEQAIR96 a valuable educational code as well as a practical spectroscopic prediction and diagnostic code.

  4. Aircraft noise prediction program propeller analysis system IBM-PC version user's manual version 2.0

    NASA Technical Reports Server (NTRS)

    Nolan, Sandra K.

    1988-01-01

    The IBM-PC version of the Aircraft Noise Prediction Program (ANOPP) Propeller Analysis System (PAS) is a set of computational programs for predicting the aerodynamics, performance, and noise of propellers. The ANOPP-PAS is a subset of a larger version of ANOPP which can be executed on CDC or VAX computers. This manual provides a description of the IBM-PC version of the ANOPP-PAS and its prediction capabilities, and instructions on how to use the system on an IBM-XT or IBM-AT personal computer. Sections within the manual document installation, system design, ANOPP-PAS usage, data entry preprocessors, and ANOPP-PAS functional modules and procedures. Appendices to the manual include a glossary of ANOPP terms and information on error diagnostics and recovery techniques.

  5. Language Is the Key: A Multilingual Language Building Program for Young Children. Training Manual To Accompany the Video Programs: Talking and Books [and] Talking and Play.

    ERIC Educational Resources Information Center

    Notari-Syverson, Angela; Madddox, Mary; Lim, Young Sook; Cole, Kevin

    This educational program, comprised of a training manual and 2 accompanying videotapes (each about 25 minutes long), is designed to develop language skills in young children with language disorders and/or children from minority backgrounds. The program model is based on the following principles: (1) early language is critical to later academic…

  6. Sourcebook for Community-Based Training Programs. Information Collection & Exchange T0088. Supplement to Peace Corps Programming and Training System Manual.

    ERIC Educational Resources Information Center

    Hay, James Diego

    This manual describes an approach to training provided by the Peace Corps that is known as community-based or Fully Integrated Training (FIT). FIT is a decentralized training program, in which trainees are divided into small groups and placed in separate communities for the duration of the preservice training program. The main part of the manual…

  7. Small Business Management. Instructor's Manual on Interpretation of Small Business Analysis Data. Entrepreneurship Education for Adults--Program Development and Implementation.

    ERIC Educational Resources Information Center

    Minnesota Univ., St. Paul. Dept. of Agricultural Education.

    Tables and significant figures found in a small business analysis report are explained to provide instructors with suggestions on how these items can be used by students to improve the management of small businesses. Contents of the manual are organized into two parts. Part I, The Analysis Report, contains the following chapters: (A) Business…

  8. A Two-Year Report on the Experimental Freshman Year Program. Chapter II, A Review of Research Literature Concerning Low Achievers.

    ERIC Educational Resources Information Center

    Kibler, Robert J., Ed.

    This chapter, published as part of an extensive report on an experimental college program for low-achieving students, provides a comprehensive review of recent research literature related to low-achievers. Organized into several sections, the review deals with literature on identifying over-and under-achievers, factors related to achievement and…

  9. A Two-Year Report on the Experimental Freshman Year Program. Chapter V, Biographical and Attitudinal Information on Experimental Freshman Year Students.

    ERIC Educational Resources Information Center

    Kibler, Robert J., Ed.

    Chapter V is made up of information on the attitudes and background of participants in an experimental freshman year program for underachieving high school graduates at Southern Illinois University. Included is a description of changes and differences among the students resulting from the experimental treatment and of the participants' reactions…

  10. DESAP 1: A structural design program with stress and displacement constraints. Volume 1: Theoretical and user's manual

    NASA Technical Reports Server (NTRS)

    Kiusalaas, J.; Reddy, G. B.

    1977-01-01

    A finite element program is presented for computer-automated, minimum weight design of elastic structures with constraints on stresses (including local instability criteria) and displacements. Volume 1 of the report contains the theoretical and user's manual of the program. Sample problems and the listing of the program are included in Volumes 2 and 3. The element subroutines are organized so as to facilitate additions and changes by the user. As a result, a relatively minor programming effort would be required to make DESAP 1 into a special purpose program to handle the user's specific design requirements and failure criteria.

  11. Tools for Prevention: Building Healthy Youths. A Training Program for: School Counselors, School Nurses, School Psychologists. Trainer Manual.

    ERIC Educational Resources Information Center

    Kohler, Maxie P.; Collins, Charles B., Jr.

    This training program instructor's manual is designed to assist K-12 school counselors, nurses, and psychologists in offering aid to youths at risk for substance abuse. The training objectives for participants in the workshop are to be able to demonstrate: (1) competence in knowledge of basic substance abuse information to include age-appropriate…

  12. Tools for Prevention: Building Healthy Youths. A Training Program for: School Counselors, School Nurses, School Psychologists. Participant Manual.

    ERIC Educational Resources Information Center

    Kohler, Maxie P.; Collins, Charles B., Jr.

    This training program participants' manual is designed to assist K-12 school counselors, nurses, and psychologists in offering aid to youths at risk for substance abuse. The training objectives for participants in the workshop are to be able to demonstrate: (1) competence in knowledge of basic substance abuse information to include age-appropriate…

  13. Social Work Program. Field Placement Manual for Social Work Field Placement I, Social Work Field Placement II.

    ERIC Educational Resources Information Center

    Miller, Howard J.; And Others

    This document is a manual for a social work field placement program. The social work field placement is described as a learning experience designed to translate the students' interests, interpersonal abilities, and academic knowledge and theory into the capability of enabling others to solve problems. Expectations of skills to be learned in the…

  14. SRB-3D Solid Rocket Booster performance prediction program. Volume 1: Engineering description/users information manual

    NASA Technical Reports Server (NTRS)

    Winkler, J. C.

    1976-01-01

    The modified Solid Rocket Booster Performance Evaluation Model (SRB-3D) was developed as an extension to the internal ballistics module of the SRB-2 performance program. This manual contains the engineering description of SRB-3D which describes the approach used to develop the 3D concept and an explanation of the modifications which were necessary to implement these concepts.

  15. Effectiveness of an Attachment-Focused Manualized Intervention for Parents of Teens at Risk for Aggressive Behaviour: The Connect Program

    ERIC Educational Resources Information Center

    Moretti, Marlene M.; Obsuth, Ingrid

    2009-01-01

    Aggressive, violent and antisocial behaviour in children and adolescents is a growing concern across the globe. Targeting parent-teen relationships is critical in reducing problem behaviour. "Connect" is a manualized ten-week program for parents or alternative caregivers of at-risk teens that focuses on the building blocks of secure attachment:…

  16. Talking with Kids about AIDS: A Program for Parents and Other Adults Who Care. Teaching Guide [and] Resource Manual.

    ERIC Educational Resources Information Center

    Tiffany, Jennifer; Tobias, Donald; Raqub, Arzeymah; Ziegler, Jerome

    The teaching guide and resource manual present information to help parents and other adults talk to children and adolescents about AIDS. The teaching guide is a resource for conducting parent AIDS education programs. It presents step-by-step instructions for facilitators that explain the activities and objectives and the teaching techniques for…

  17. Resource Manual 71 for the Development of Cooperative Vocational Education Programs Under the Vocational Education Amendments of 1968.

    ERIC Educational Resources Information Center

    Bureau of Adult, Vocational, and Technical Education (DHEW/OE), Washington, DC. Div. of Vocational and Technical Education.

    Designed to be used with "A Guide for Cooperative Vocational Education" (ED 037 564), this resource manual summarizes selected facts and suggestions to help state staffs in developing and planning cooperative vocational education programs. Sections are: (1) an introductory section describing cooperative vocational education, (2) definition and…

  18. Medical Record Clerk Training Program, Course of Study; Student Manual: For Medical Record Personnel in Small Rural Hospitals in Colorado.

    ERIC Educational Resources Information Center

    Community Health Service (DHEW/PHS), Arlington, VA. Div. of Health Resources.

    The manual provides major topics, objectives, activities and, procedures, references and materials, and assignments for the training program. The topics covered are hospital organization and community role, organization and management of a medical records department, international classification of diseases and operations, medical terminology,…

  19. Developmental Disabilities Manual, 1984-1985. Revised. Delta College Parent Awareness. Developmental Disabilities/Parent Awareness Program.

    ERIC Educational Resources Information Center

    Delta Coll., University Center, MI. Allied Health-Community Affairs.

    Developed as part of Delta College's Parent Awareness Program, this manual offers parents and family members of handicapped children explanations of the following conditions: mental retardation, cerebral palsy, epilepsy, learning disabilities, and autism. In the first section, "Special Parenting Information," Gerri Caesar describes her own…

  20. Chemical Dependency Unit: One Aspect of the Program for Student Assistance of Bryan Sr. High School. Teacher Manual.

    ERIC Educational Resources Information Center

    Omaha Public Schools, NE.

    This teachers manual provides three instructional units (Chemical Dependency, A Disease; The Family; and Intervention and Recovery) for chemical dependency education at the high school level. The history, objectives, and teaching philosophy of the program are discussed briefly, and a course syllabus outline and audiovisual aids list by section are…

  1. 42 CFR 137.5 - Effect of these regulations on Federal program guidelines, manual, or policy directives.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Effect of these regulations on Federal program guidelines, manual, or policy directives. 137.5 Section 137.5 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES INDIAN HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES...

  2. 42 CFR 137.5 - Effect of these regulations on Federal program guidelines, manual, or policy directives.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Effect of these regulations on Federal program guidelines, manual, or policy directives. 137.5 Section 137.5 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES INDIAN HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES...

  3. 42 CFR 137.5 - Effect of these regulations on Federal program guidelines, manual, or policy directives.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Effect of these regulations on Federal program guidelines, manual, or policy directives. 137.5 Section 137.5 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES INDIAN HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES...

  4. 42 CFR 137.5 - Effect of these regulations on Federal program guidelines, manual, or policy directives.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Effect of these regulations on Federal program guidelines, manual, or policy directives. 137.5 Section 137.5 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES INDIAN HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES...

  5. 42 CFR 137.5 - Effect of these regulations on Federal program guidelines, manual, or policy directives.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Effect of these regulations on Federal program guidelines, manual, or policy directives. 137.5 Section 137.5 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES INDIAN HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES...

  6. Children, Food, and Family Day Care: A Manual for Sponsorship of the Child Care Food Program in Licensed Family Day Care.

    ERIC Educational Resources Information Center

    O'Konski, Gerry, Ed.

    This manual provides detailed information on how local non-profit organizations can sponsor licensed family day care homes for participation in the federally funded Child Care Food Program. This program subsidizes the provision of nutritious meals to children who are not in school. The introductory section of the manual answers basic questions…

  7. Radiological Safety Analysis Computer (RSAC) Program Version 7.2 Users’ Manual

    SciTech Connect

    Dr. Bradley J Schrader

    2010-10-01

    The Radiological Safety Analysis Computer (RSAC) Program Version 7.2 (RSAC-7) is the newest version of the RSAC legacy code. It calculates the consequences of a release of radionuclides to the atmosphere. A user can generate a fission product inventory from either reactor operating history or a nuclear criticality event. RSAC-7 models the effects of high-efficiency particulate air filters or other cleanup systems and calculates the decay and ingrowth during transport through processes, facilities, and the environment. Doses are calculated for inhalation, air immersion, ground surface, ingestion, and cloud gamma pathways. RSAC-7 can be used as a tool to evaluate accident conditions in emergency response scenarios, radiological sabotage events and to evaluate safety basis accident consequences. This users’ manual contains the mathematical models and operating instructions for RSAC-7. Instructions, screens, and examples are provided to guide the user through the functions provided by RSAC-7. This program was designed for users who are familiar with radiological dose assessment methods.

  8. Computer program for analysis of impedance cardiography signals enabling manual correction of points detected automatically

    NASA Astrophysics Data System (ADS)

    Oleksiak, Justyna; Cybulski, Gerard

    2014-11-01

    The aim of this work was to create a computer program, written in LabVIEW, which enables the visualization and analysis of hemodynamic parameters. It allows the user to import data collected using ReoMonitor, an ambulatory monitoring impedance cardiography (AICG) device. The data include one channel of the ECG and one channel of the first derivative of the impedance signal (dz/dt) sampled at 200Hz and the base impedance signal (Z0) sampled every 8s. The program consist of two parts: a bioscope allowing the presentation of traces (ECG, AICG, Z0) and an analytical portion enabling the detection of characteristic points on the signals and automatic calculation of hemodynamic parameters. The detection of characteristic points in both signals is done automatically, with the option to make manual corrections, which may be necessary to avoid "false positive" recognitions. This application is used to determine the values of basic hemodynamic variables: pre-ejection period (PEP), left ventricular ejection time (LVET), stroke volume (SV), cardiac output (CO), and heart rate (HR). It leaves room for further development of additional features, for both the analysis panel and the data acquisition function.

  9. Radiological Safety Analysis Computer (RSAC) Program Version 7.0 Users’ Manual

    SciTech Connect

    Dr. Bradley J Schrader

    2009-03-01

    The Radiological Safety Analysis Computer (RSAC) Program Version 7.0 (RSAC-7) is the newest version of the RSAC legacy code. It calculates the consequences of a release of radionuclides to the atmosphere. A user can generate a fission product inventory from either reactor operating history or a nuclear criticality event. RSAC-7 models the effects of high-efficiency particulate air filters or other cleanup systems and calculates the decay and ingrowth during transport through processes, facilities, and the environment. Doses are calculated for inhalation, air immersion, ground surface, ingestion, and cloud gamma pathways. RSAC-7 can be used as a tool to evaluate accident conditions in emergency response scenarios, radiological sabotage events and to evaluate safety basis accident consequences. This users’ manual contains the mathematical models and operating instructions for RSAC-7. Instructions, screens, and examples are provided to guide the user through the functions provided by RSAC-7. This program was designed for users who are familiar with radiological dose assessment methods.

  10. ASTROP2 Users Manual: A Program for Aeroelastic Stability Analysis of Propfans

    NASA Technical Reports Server (NTRS)

    Reddy, T. S. R.; Lucero, John M.

    1996-01-01

    This manual describes the input data required for using the second version of the ASTROP2 (Aeroelastic STability and Response Of Propulsion systems - 2 dimensional analysis) computer code. In ASTROP2, version 2.0, the program is divided into two modules: 2DSTRIP, which calculates the structural dynamic information; and 2DASTROP, which calculates the unsteady aerodynamic force coefficients from which the aeroelastic stability can be determined. In the original version of ASTROP2, these two aspects were performed in a single program. The improvements to version 2.0 include an option to account for counter rotation, improved numerical integration, accommodation for non-uniform inflow distribution, and an iterative scheme to flutter frequency convergence. ASTROP2 can be used for flutter analysis of multi-bladed structures such as those found in compressors, turbines, counter rotating propellers or propfans. The analysis combines a two-dimensional, unsteady cascade aerodynamics model and a three dimensional, normal mode structural model using strip theory. The flutter analysis is formulated in the frequency domain resulting in an eigenvalue determinant. The flutter frequency and damping can be inferred from the eigenvalues.

  11. Users' manual for computer program for one-dimensional analysis of coupled-cavity traveling wave tubes

    NASA Technical Reports Server (NTRS)

    Omalley, T. A.; Connolly, D. J.

    1977-01-01

    The use of the coupled cavity traveling wave tube for space communications has led to an increased interest in improving the efficiency of the basic interaction process in these devices through velocity resynchronization and other methods. To analyze these methods, a flexible, large signal computer program for use on the IBM 360/67 time-sharing system has been developed. The present report is a users' manual for this program.

  12. Users' manual for computer program for three-dimensional analysis of coupler-cavity traveling wave tubes

    NASA Technical Reports Server (NTRS)

    Omalley, T. A.

    1984-01-01

    The use of the coupled cavity traveling wave tube for space communications has led to an increased interest in improving the efficiency of the basic interaction process in these devices through velocity resynchronization and other methods. A flexible, three dimensional, axially symmetric, large signal computer program was developed for use on the IBM 370 time sharing system. A users' manual for this program is included.

  13. Program user's manual for optimizing the design of a liquid or gaseous propellant rocket engine with the automated combustor design code AUTOCOM

    NASA Technical Reports Server (NTRS)

    Reichel, R. H.; Hague, D. S.; Jones, R. T.; Glatt, C. R.

    1973-01-01

    This computer program manual describes in two parts the automated combustor design optimization code AUTOCOM. The program code is written in the FORTRAN 4 language. The input data setup and the program outputs are described, and a sample engine case is discussed. The program structure and programming techniques are also described, along with AUTOCOM program analysis.

  14. A fast reactor transient analysis methodology for PCs: Volume 3, LTC program manual of the QuickBASIC code

    SciTech Connect

    Ott, K.O.; Chung, L.

    1992-06-01

    This manual augments the detailed manual of the GW-BASIC version of the LTC code for an application in QuickBASIC. As most of the GW-BASIC coding of this program for ``LMR Transient Calculations`` is compatible with QuickBASIC, this manual pertains primarily to the required changes, such as the handling of input and output. The considerable reduction in computation time achieved by this conversion is demonstrated for two sample problems, using a variety of hardware and execution options. The revised code is listed. Although the severe storage limitations of GW-BASIC no longer apply, the LOF transient path has not been completed in this QuickBASIC code. Its advantages are thus primarily in the much faster running time for TOP and LOHS transients. For the fastest PC hardware (486) and execution option the computation time is reduced by a factor of 124 compared to GW-BASIC on a 386/20.

  15. A fast reactor transient analysis methodology for PCs: Volume 3, LTC program manual of the QuickBASIC code

    SciTech Connect

    Ott, K.O.; Chung, L. . School of Nuclear Engineering)

    1992-06-01

    This manual augments the detailed manual of the GW-BASIC version of the LTC code for an application in QuickBASIC. As most of the GW-BASIC coding of this program for LMR Transient Calculations'' is compatible with QuickBASIC, this manual pertains primarily to the required changes, such as the handling of input and output. The considerable reduction in computation time achieved by this conversion is demonstrated for two sample problems, using a variety of hardware and execution options. The revised code is listed. Although the severe storage limitations of GW-BASIC no longer apply, the LOF transient path has not been completed in this QuickBASIC code. Its advantages are thus primarily in the much faster running time for TOP and LOHS transients. For the fastest PC hardware (486) and execution option the computation time is reduced by a factor of 124 compared to GW-BASIC on a 386/20.

  16. Planning Manual for School-Age Child Care in New Mexico.

    ERIC Educational Resources Information Center

    Rainhart, Dolly

    This manual was designed to assist concerned individuals and organizations within communities in New Mexico to develop and plan effective school-age child care programs. Emphasized are the first steps in initiating and implementing school-age child care in a community. Chapter I discusses the need for school-age child care programs and the…

  17. Kentucky Disability Resource Manual: A Handbook of Program Descriptions, Eligibility Criteria, and Contact Information

    ERIC Educational Resources Information Center

    Human Development Institute, 2010

    2010-01-01

    This manual was designed primarily for use by individuals with developmental disabilities and related conditions. It is hoped that it is also useful for families, as well as service coordinators and providers who directly assist families and individuals with developmental disabilities. The main focus of this manual is to provide easy-to-read…

  18. Occupational and Physical Therapy Services, School Based Programs: An Organizational Manual, 1982-83.

    ERIC Educational Resources Information Center

    McKee, Marlene, Comp.; And Others

    A 1982-83 manual on school-based occupational therapy and physical therapy (OT/PT) services in Texas is presented. Contents include: guidelines, evaluation forms, student and therapists' documentation forms, and policy/procedures manuals for a suburban independent school district and a rural independent school district. Part I provides the…

  19. Almond Production Manual Chapter: Insects and Mites

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The navel orangeworm, Amyelois transitella (Walker), is the most important insect pest of almond in California and can cost as much as $500 dollars per acre to control when the costs of insecticides and sanitation are included. It is a native of the southwestern United States and Mexico and was firs...

  20. Improving human capabilities for combined manual handling tasks through a short and intensive physical training program.

    PubMed

    Genaidy, A M; Gupta, T; Alshedi, A

    1990-11-01

    The primary objectives of this study were to test whether the muscular endurance, muscular strength, cardiovascular endurance, and workload perception of individuals engaged in combined manual handling tasks could be improved through a short and intensive physical training program. Three groups were formed to achieve the objectives of this study, and five subjects participated in each group. Two groups were trained using the concept of progressive resistance exercise; one group used the concept of six-repetition maximum (6 RM) while the other group followed the ten-repetition maximum (10 RM) protocol. The third group was used as a control group to monitor the effectiveness of the training groups. The training groups required subjects' attendance at 16 sessions for a period of 6 weeks. The control group performed the same tests given to the training group twice, separated by a period of 6 weeks. Endurance time, heart rate, ratings of perceived exertion, and static and dynamic strength were the response variables. Based on the results of this study, the following conclusions could be made: (1) it is possible to significantly improve muscular endurance, muscular strength, and cardiovascular endurance through the short and intensive training protocols examined in this investigation (the 10 RM training protocol, however, yielded better improvement in human physical capability than the 6 RM training protocol); and (2) for a fixed work load, endurance time can increase without changing job demand perception. PMID:2085166

  1. Boilermaking Manual.

    ERIC Educational Resources Information Center

    British Columbia Dept. of Education, Victoria.

    This manual is intended (1) to provide an information resource to supplement the formal training program for boilermaker apprentices; (2) to assist the journeyworker to build on present knowledge to increase expertise and qualify for formal accreditation in the boilermaking trade; and (3) to serve as an on-the-job reference with sound, up-to-date…

  2. Computer Manual.

    ERIC Educational Resources Information Center

    Illinois State Office of Education, Springfield.

    This manual designed to provide the teacher with methods of understanding the computer and its potential in the classroom includes four units with exercises and an answer sheet. Unit 1 covers computer fundamentals, the mini computer, programming languages, an introduction to BASIC, and control instructions. Variable names and constants described…

  3. Chapter 1 and Chapter 1 Migrant. Evaluation Findings, 1990-91. Executive Summary.

    ERIC Educational Resources Information Center

    Christner, Catherine; And Others

    This report describes an evaluation of the Austin (Texas) Independent School District's (AISD) Chapter 1 and Chapter 1 Migrant programs. Chapter 1 is a federally funded compensatory educational program that provided funding in 1990-91 to 25 AISD elementary schools with high concentrations of low-income students. Chapter 1 Migrant is also a…

  4. Developing a Promotional Plan for Adult Vocational Programs.

    ERIC Educational Resources Information Center

    Shubird, Ernest

    This manual provides guidelines for promoting adult vocational programs in order to obtain increased funding, expand program offerings, attract more students, and develop and conduct customized training. The publication is organized in seven chapters. Chapter 1 discusses briefly the history of adult vocational training, reviews its purposes,…

  5. Program Manual for the High School/High Tech Program: Providing Careers in Technology for Youth with Disabilities

    ERIC Educational Resources Information Center

    Institute for Educational Leadership (NJ1), 2003

    2003-01-01

    This Manual should serve as a primary resource for site operators. It is organized so that all sites, no matter where they are in their development, will be able to find the information and resources they need to grow their initiative. In addition to offering suggestions on how to organize and conduct activities, this Manual provides research and…

  6. Approximate method for calculating transonic flow about lifting wing-body configurations: Computer program and user's manual

    NASA Technical Reports Server (NTRS)

    Barnwell, R. W.; Davis, R. M.

    1975-01-01

    A user's manual is presented for a computer program which calculates inviscid flow about lifting configurations in the free-stream Mach-number range from zero to low supersonic. Angles of attack of the order of the configuration thickness-length ratio and less can be calculated. An approximate formulation was used which accounts for shock waves, leading-edge separation and wind-tunnel wall effects.

  7. Classification of Living Things. A Teacher's Manual for General Level Program Development. Grades 7 and 8. Science and Society Teaching Units. Informal Series/55.

    ERIC Educational Resources Information Center

    Roberts, Douglas A.; And Others

    This manual is one of a series designed to assist junior high school teachers in developing general level or non-academic science programs which focus on the relationship between science and society. Although designed primarily for grades 7 and 8, the content is also suitable for students in grade 6. The major portion of the manual consists of six…

  8. Students' Own Bookshop: A Program To Enhance Middle Grades Reading and Leadership through Student Managed Paperback Bookshop Operation. Manual of Ideas and Procedures.

    ERIC Educational Resources Information Center

    Braught, Loran, Comp.

    This manual was developed as one outcome of a 2-year experimental project conducted in 53 school districts in Indiana (1990-92). The manual was designed to be a resource to schools interested in operating a successful "Students' Own Bookshop" program to encourage development of literacy and leadership among the students of their school. The…

  9. Abstracts and program proceedings of the 1994 meeting of the International Society for Ecological Modelling North American Chapter

    SciTech Connect

    Kercher, J.R.

    1994-06-01

    This document contains information about the 1994 meeting of the International Society for Ecological Modelling North American Chapter. The topics discussed include: extinction risk assessment modelling, ecological risk analysis of uranium mining, impacts of pesticides, demography, habitats, atmospheric deposition, and climate change.

  10. Chapter A3. Cleaning of Equipment for Water Sampling

    USGS Publications Warehouse

    Wilde, Franceska D.; Radtke, Dean B.; Gibs, Jacob; Iwatsubo, Rick T.

    1998-01-01

    The National Field Manual for the Collection of Water-Quality Data (National Field Manual) describes protocols and provides guidelines for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation's surface-water and ground-water resources. Chapter A3 describes procedures for cleaning the equipment used to collect and process samples of surface water and ground water and procedures for assessing the efficacy of the equipment-cleaning process. This chapter is designed for use with the other chapters of this field manual. Each chapter of the National Field Manual is published separately and revised periodically. Newly published and revised chapters will be posted on the USGS page 'National Field Manual for the Collection of Water-Quality Data.' The URL for this page is http://pubs.water.usgs.gov/twri9A/ (accessed September 20, 2004).

  11. The topside ionospheric plasma monitor (SSIES, SSIES-2 and SSIES-3) on the spacecraft of the Defense Meteorological Satellite Program (DMSP), user's guide. Volume 3: Program maintenance manual

    NASA Astrophysics Data System (ADS)

    Cornelius, J. R.; Mazzella, Andrew J., Jr.

    1994-10-01

    The objective of the Program Maintenance Manual for the DMSP SSIES flight data processing software is to provide AFSFC programming personnel with the information necessary to understand and maintain the various components of the system. This software has been specifically developed to process the SSIES-2 and SSIES-2A data formats, with provisions for retroactive adaptation to the original SSIES format and future adaptation to the SSIES-3 format. This Program Maintenance Manual describes the three programs which constitute the AFSFC SSIES processing system: BNBA, LDCON02, and APGA. The BNBA program performs data format conversions for the various SSIES telemetry data formats to generate a common file format for subsequent processing by the APGA program. The LDCON02 program generates the reference parameter file of satellite and instrument conversion constants and processing options for use by the APGA program. The APGA program performs quality evaluations and analyses of the SSIES telemetry data to create database files and reports of quantities which characterize the ionosphere.

  12. User's manual for EZPLOT version 5.5: A FORTRAN program for 2-dimensional graphic display of data

    NASA Technical Reports Server (NTRS)

    Garbinski, Charles; Redin, Paul C.; Budd, Gerald D.

    1988-01-01

    EZPLOT is a computer applications program that converts data resident on a file into a plot displayed on the screen of a graphics terminal. This program generates either time history or x-y plots in response to commands entered interactively from a terminal keyboard. Plot parameters consist of a single independent parameter and from one to eight dependent parameters. Various line patterns, symbol shapes, axis scales, text labels, and data modification techniques are available. This user's manual describes EZPLOT as it is implemented on the Ames Research Center, Dryden Research Facility ELXSI computer using DI-3000 graphics software tools.

  13. Ciencias 2. Manual do Professor (Science Teacher's Manual).

    ERIC Educational Resources Information Center

    Raposo, Lucilia

    This is the teacher's manual for Ciencias 2, the second in a series of elementary science textbooks for Portuguese-speaking students. The student textbook contains 10 chapters and 57 activities. The teacher's manual presents an explanation of the educational goals and the organization of the content, Topics included are environment, the human,…

  14. Hoisting and rigging manual: Uncontrolled document

    SciTech Connect

    1991-05-01

    This document is a draft copy of a Hoisting and Rigging Manual for the Department of Energy. The manual is divided into ten chapters. The chapter titles follow: terminology and definitions; operator training and qualification; overhead and gantry cranes; mobile cranes; forklift trucks; hoists; hooks; wire rope, slings, and rigging accessories; construction hoisting and rigging equipment requirements; references.

  15. Manual Laboratorio de Microbiologia. Documento de trabajo Programa de Educacion en Ocupaciones de Salud (Microbiology Laboratory Manual. Curriculum Document. Program of Education in Health Occupations).

    ERIC Educational Resources Information Center

    Puerto Rico State Dept. of Education, Hato Rey. Area for Vocational and Technical Education.

    This laboratory manual on microbiology begins with an introduction relating the study of microorganisms to health occupations education and stressing the importance of teaching critical thinking. The introduction is followed by general instructions for the use of the manual and an illustration of hand washing procedures. The 13 laboratory…

  16. Heavy manual work, exposure to vibration and Dupuytren's disease? Results of a surveillance program for musculoskeletal disorders

    PubMed Central

    Descatha, Alexis; Bodin, Julie; Ha, Catherine; Goubault, Pierre; Lebreton, Marine; Chastang, Jean François; Imbernon, Ellen; Leclerc, Annette; Goldberg, Marcel; Roquelaure, Yves

    2012-01-01

    Introduction In view of the debate about occupational factors in Dupuytren’s disease, the aim of this study was to describe the prevalence of the disease in men and its relationship with work exposure, and especially to distinguish heavy manual work with and without significant use of vibrating tools by using data from a surveillance program for musculoskeletal disorders. Method This cross-sectional study was conducted in France between 2002 and 2004. Dupuytren’s disease was diagnosed clinically by one of the 83 occupational physicians involved in the program. Exposure in relation to work status and occupational risk factors was assessed with a self-administered questionnaire, and was categorized according to vibration exposure (defined as use of vibrating tools ≥2h/day), heavy manual work without vibration exposure [defined as use of hand tools ≥2h/day (use of vibrating tools ≥2h/day excluded) and Borg scale ≥15/20] and no form of such exposure. Bivariate and multivariate associations using logistic models were recorded in men and also in those with over 10 years at the same job. Results Of the 2,161 men, 1.3% (n=27) suffered from Dupuytren’s disease (mean age 47.1+/−6.7 years). Heavy manual work without vibration exposure was significantly associated with the disease (adjusted odds ratio - aOR- 3.9[1.3;11.5]) adjusted on age and diabetes), as was the use of vibrating tools (aOR 5.1[2.1;12.2]). These associations remained significant among subjects with over 10 years at the same job, with increases in aOR of 6.1[1.5;25.0] and 10.7[3.4;34.6], respectively. Conclusion Despite the limited number of cases, occupational exposure, including both vibration exposure and heavy manual work without significant vibration exposure, was associated with Dupuytren’s disease. PMID:22213840

  17. Manual of Educational Risk Management.

    ERIC Educational Resources Information Center

    Cody, Frank J.; Dise, John H., Jr.

    This is the first risk management publication for school administrators that attempts to be comprehensive by addressing all potential areas of risk to school districts and offering specific guidelines on how to manage those areas. Chapter 1 gives directions on how to use the manual. Chapter 2 contains a complete overview of risk management,…

  18. Wastewater Treatment I. Instructor's Manual.

    ERIC Educational Resources Information Center

    California Water Pollution Control Association, Sacramento. Joint Education Committee.

    This instructor's manual provides an outline and guide for teaching Wastewater Treatment I. It consists of nine sections. An introductory note and a course outline comprise sections 1 and 2. Section 3 (the bulk of the guide) presents lesson outlines for teaching the ten chapters of the manual entitled "Operation of Wastewater Treatment Plants."…

  19. Education-Planning-Programming-Budgeting System Documentation Manual for School Districts, Version II, Model 1.

    ERIC Educational Resources Information Center

    Pennsylvania Univ., Philadelphia. Government Studies Center.

    This document details a semiautomated PPB system developed in an ESEA Title III project, Intermediate Unit Planning Study, for use in Pennsylvania (see EA 002 750). Two semiautomated versions were developed, both dependent for calculation on the use of electronic data processing equipment. This is a documentation manual for the first of these…

  20. Auditory Assessment and Program Manual for Severely Handicapped Deaf-Blind Students.

    ERIC Educational Resources Information Center

    Sailor, Wayne

    Intended for teachers and caregivers of severely handicapped individuals with impaired hearing, the manual provides information about hearing and audiological assessment. Section I presents an overview of the nature of sound and the structure of the ear. Section II describes a number of informal assessment procedures which can be carried out in…

  1. Higher Education Facilities Comprehensive Planning Program. Facilities Inventory Manual for New York State. Revised 1969.

    ERIC Educational Resources Information Center

    New York State Education Dept., Albany. Office of Higher Education Planning.

    Guidelines are presented to assist New York institutions of higher education in classifying building data by means of a uniform system that will be compatible with a similar coding system in use throughout the United States. This facilities inventory manual includes a description of the Higher Education Facilities Comprehensive Planning Program…

  2. Parenting Skills Manual, 1984-1985. Delta College Parent Awareness. Developmental Disabilities/Parent Awareness Program.

    ERIC Educational Resources Information Center

    Delta Coll., University Center, MI. Allied Health-Community Affairs.

    Designed for parents with handicapped children, this manual provides current information on the development and growth stages of all children to serve as a basis or guideline for comparison. First, introductory comments focus on skills needed by all parents to help their children build feelings of self-worth and to grow. Next, an overview is…

  3. Impacts of Outer Continental Shelf (OCS) development on recreation and tourism. Volume 5. Program logic manual

    SciTech Connect

    Not Available

    1987-04-01

    The final report for the project is presented in five volumes. This volume is the Programmer's Manual. It covers: a system overview, attractiveness component of gravity model, trip-distribution component of gravity model, economic-effects model, and the consumer-surplus model. The project sought to determine the impact of Outer Continental Shelf development on recreation and tourism.

  4. A Student Records Manual. Guidelines for the Administration of College Admissions, Financial Aid, and Registration Programs.

    ERIC Educational Resources Information Center

    National Association of College and University Business Officers, Washington, DC.

    This manual has been prepared to provide operating guidelines for admissions officers, financial aid officers, and registrars. The systems described herein were designed specifically for the predominantly Negro colleges, but the procedures are applicable to other 4-year liberal arts colleges with the following general characteristics: (1) small to…

  5. Human Awareness Program: A Sex Manual for Use in Juvenile Court Schools.

    ERIC Educational Resources Information Center

    Peter, Barbara

    The booklet provides information and materials for setting up and implementing a 10-day sex education course for delinquent or sexually active adolescents. The course objectives are stated as imparting factual information in the areas of anatomy, venereal disease, birth control, and pregnancy. The manual provides information on staff…

  6. Homestay Program Orientation Manual, Including Leader's Guides and Preparatory Readings, Plus Materials for Student Use.

    ERIC Educational Resources Information Center

    Grove, Cornelius Lee; Hansel, Bettina

    Developed as orientation materials for foreign students coming to the United States to study English, this manual contains six units to acquaint students with U.S. history, government, and culture. The first unit introduces students to the daily routines and interpersonal relationships of U.S. people. Unit 2 examines the origins and significance…

  7. Student Attendance Accounting Manual.

    ERIC Educational Resources Information Center

    Freitas, Joseph M.

    In response to state legislation authorizing procedures for changes in academic calendars and measurement of student workload in California community colleges, this manual from the Chancellor's Office provides guidelines for student attendance accounting. Chapter 1 explains general items such as the academic calendar, admissions policies, student…

  8. Elementary School Finance Manual.

    ERIC Educational Resources Information Center

    National Catholic Educational Association, Washington, DC.

    Developed to assist those responsible for financial matters in Catholic elementary schools, this manual presents each topic briefly and simply, taking into account administrators' minimal formal financial training. It is divided into six sections. Chapter 1, "Daily Financial Operations," describes the specifics of handling receipts, billings, and…

  9. Rescue Manual. Module 8.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This learner manual for rescuers covers the current techniques or practices required in the rescue service. The eighth of 10 modules contains 6 chapters: (1) trench rescue; (2) shoring and tunneling techniques; (3) farm accident rescue; (4) wilderness search and rescue; (5) aircraft rescue; and (6) helicopter information. Key points, an…

  10. Rescue Manual. Module 4.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This learner manual for rescuers covers the current techniques or practices required in the rescue service. The fourth of 10 modules contains 8 chapters: (1) construction and characteristics of rescue rope; (2) knots, bends, and hitches; (3) critical angles; (4) raising systems; (5) rigging; (6) using the brake-bar rack for rope rescue; (7) rope…

  11. The Tree Worker's Manual.

    ERIC Educational Resources Information Center

    Smithyman, S. J.

    This manual is designed to prepare students for entry-level positions as tree care professionals. Addressed in the individual chapters of the guide are the following topics: the tree service industry; clothing, eqiupment, and tools; tree workers; basic tree anatomy; techniques of pruning; procedures for climbing and working in the tree; aerial…

  12. Radiological Defense Manual.

    ERIC Educational Resources Information Center

    Defense Civil Preparedness Agency (DOD), Washington, DC.

    Originally prepared for use as a student textbook in Radiological Defense (RADEF) courses, this manual provides the basic technical information necessary for an understanding of RADEF. It also briefly discusses the need for RADEF planning and expected postattack emergency operations. There are 14 chapters covering these major topics: introduction…

  13. Rescue Manual. Module 6.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This learner manual for rescuers covers the current techniques or practices required in the rescue service. The sixth of 10 modules contains 4 chapters: (1) industrial rescue; (2) rescue from a confined space; (3) extrication from heavy equipment; and (4) rescue operations involving elevators. Key points, an introduction, and conclusion accompany…

  14. Matematica 3. Manual.

    ERIC Educational Resources Information Center

    D'Alu, Maria Jose Miranda de Sousa

    This teachers manual accompanies a mathematics textbook, written in Portuguese, for third graders. It closely follows the objectives and methodology of the major curricula used throughout the schools in the United States. The 11 chapters deal with: numeration (0-999,999); addition with and without regrouping; subtraction with and without…

  15. Rescue Manual. Module 9.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This learner manual for rescuers covers the current techniques or practices required in the rescue service. The ninth of 10 modules contains 7 chapters: (1) ice characteristics; (2) river characteristics and tactics for rescue; (3) water rescue techniques; (4) water rescue/recovery operations; (5) dive operations; (6) water rescue equipment; and…

  16. Bridge Inspector's Training Manual.

    ERIC Educational Resources Information Center

    Federal Highway Administration (DOT), Washington, DC. Bureau of Public Roads.

    A guide for the instruction of bridge inspectors is provided in this manual as well as instructions for conducting and reporting on a bridge inspection. The chapters outline the qualifications necessary to become a bridge inspector. The subject areas covered are: The Bridge Inspector, Bridge Structures, Bridge Inspection Reporting System,…

  17. Manual on Bibliographic Control.

    ERIC Educational Resources Information Center

    International Federation of Library Associations, The Hague (Netherlands).

    This manual outlines objectives, functions, and methods for establishing national bibliographic control as part of the development of a worldwide system for the control and exchange of bibliographic information. Chapters cover: (1) definitions of bibliographic control and related concepts including Universal Bibliographic Control (UBC) and…

  18. Language Is the Key: Building Language with Picture Books and Play. A Training Manual To Accompany the Video Programs: "Talking and Books" [and]"Talking and Play."

    ERIC Educational Resources Information Center

    Notari-Syverson, Angela; Maddox, Mary; Cole, Kevin

    This training manual and two companion videotapes comprise an educational program for professionals and paraprofessionals who work with young children with language disorders. The program is particularly helpful in serving children from linguistic minority backgrounds and their families. The program's strategies are also appropriate for teachers…

  19. So You Want To Start an Alternative School! A How-To-Do-It Manual.

    ERIC Educational Resources Information Center

    Ingram, Judith K.

    The practical steps outlined in this manual are based on the experience of establishing Marquette (Michigan) Alternative Senior High (MASH), organized in 1978 to serve rural youth who had dropped out or were not benefiting significantly from the regular high school programs. Chapters are organized in chronological progression and each refers to…

  20. Health and Safety in the School Environment. A Manual of Recommended Practice.

    ERIC Educational Resources Information Center

    Center for Disease Control (DHEW/PHS), Atlanta, GA.

    This manual emphasizes the health relationships in the physical school environment and provides environmental criteria by which existing or planned facilities can be evaluated. Individual chapters deal with school health programs; planning for new schools; school site selection, building plan, and plan review; water supply; plumbing; sewage…

  1. Nuclear material operations manual

    SciTech Connect

    Tyler, R.P.

    1981-02-01

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion.

  2. Chapter A5. Processing of Water Samples

    USGS Publications Warehouse

    Wilde, Franceska D.; Radtke, Dean B.; Gibs, Jacob; Iwatsubo, Rick T.

    1999-01-01

    The National Field Manual for the Collection of Water-Quality Data (National Field Manual) describes protocols and provides guidelines for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation's surface-water and ground-water resources. This chapter addresses methods to be used in processing water samples to be analyzed for inorganic and organic chemical substances, including the bottling of composite, pumped, and bailed samples and subsamples; sample filtration; solid-phase extraction for pesticide analyses; sample preservation; and sample handling and shipping. Each chapter of the National Field Manual is published separately and revised periodically. Newly published and revised chapters will be announced on the USGS Home Page on the World Wide Web under 'New Publications of the U.S. Geological Survey.' The URL for this page is http:/ /water.usgs.gov/lookup/get?newpubs.

  3. "Unusually Successful": Pittsfield Chapter 1.

    ERIC Educational Resources Information Center

    Shiminski, James A.

    The United States Education Department recognizes projects that effectively meet the special needs of educationally deprived students. In 1992, the Pittsfield, Massachusetts, Chapter 1 preschool program earned national validation as an "unusually successful" compensatory education program. The program has served as a statewide model, and has…

  4. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Version 5.0: Data loading manual. Volume 10

    SciTech Connect

    VanHorn, R.L.; Wolfram, L.M.; Fowler, R.D.; Beck, S.T.; Smith, C.L.

    1995-04-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) suite of programs can be used to organize and standardize in an electronic format information from probabilistic risk assessments or individual plant examinations. The Models and Results Database (MAR-D) program of the SAPHIRE suite serves as the repository for probabilistic risk assessment and individual plant examination data and information. This report demonstrates by examples the common electronic and manual methods used to load these types of data. It is not a stand alone document but references documents that contribute information relative to the data loading process. This document provides a more detailed discussion and instructions for using SAPHIRE 5.0 only when enough information on a specific topic is not provided by another available source.

  5. STC-SAB program users manual for the turbulent boundary layer and turbulent separation prediction methods employed in the NASA Langley streamtube curvature computer program

    NASA Technical Reports Server (NTRS)

    Ferguson, D. R.

    1972-01-01

    The streamtube curvature program (STC) has been developed to predict the inviscid flow field and the pressure distribution about nacelles at transonic speeds. The effects of boundary layer are to displace the inviscid flow and effectively change the body shape. Thus, the body shape must be corrected by the displacement thickness in order to calculate the correct pressure distribution. This report describes the coupling of the Stratford and Beavers boundary layer solution with the inviscid STC analysis so that all nacelle pressure forces, friction drag, and incipient separation may be predicted. The usage of the coupled STC-SAB computer program is outlined and the program input and output are defined. Included in this manual are descriptions of the principal boundary layer tables and other revisions to the STC program. The use of the viscous option is controlled by the engineer during program input definition.

  6. School Fire Safety Manual.

    ERIC Educational Resources Information Center

    Arkansas State Dept. of Education, Little Rock. General Education Div.

    This manual provides the background information necessary for the planning of school fire safety programs by local school officials, particularly in Arkansas. The manual first discusses the need for such programs and cites the Arkansas state law regarding them. Policies established by the Arkansas State Board of Education to implement the legal…

  7. School District Energy Manual.

    ERIC Educational Resources Information Center

    Association of School Business Officials International, Reston, VA.

    This manual serves as an energy conservation reference and management guide for school districts. The School District Energy Program (SDEP) is designed to provide information and/or assistance to school administrators planning to implement a comprehensive energy management program. The manual consists of 15 parts. Part 1 describes the SDEP; Parts…

  8. Competency-Based Adult Basic Education Manual for Level I (0-4.9) and Level II (5-8). A Training Manual for CBABE Instruction and Program Management.

    ERIC Educational Resources Information Center

    Singer, Elizabeth; And Others

    This training manual was developed as a source of information about Competency-Based Adult Basic Education (CBABE) for administrators, counselors, and teachers involved in the implementation of a CBABE program. After section I provides an introduction to Brevard Community College's development of CBABE curricula, section II explains the purposes…

  9. Career development through local chapter involvement: perspectives from chapter members.

    PubMed

    Thomas, Melissa; Inniss-Richter, Zipporah; Mata, Holly; Cottrell, Randall R

    2013-07-01

    The importance of career development in professional organizations has been noted in the literature. Personal and professional benefits of membership regardless of discipline can be found across the career spectrum from student to executive. The benefits of professional membership with respect to career development in local chapter organizations have seldom been studied. Local chapter participation may offer significant career development opportunities for the practitioner, faculty member, and student. The purpose of this study was to explore the importance of local chapter involvement to the career development of health education practitioners. An 18-item questionnaire was disseminated to the membership of three local SOPHE (Society for Public Health Education) chapters that explored the level of local chapter involvement and the impact of how specific professional development activities impacted career development. The results of the survey highlighted the importance of continuing education programs, networking, and leadership experience in developing one's career that are offered by local SOPHE chapter involvement. Making a positive impact in the community and earning the respect of one's peers were most often reported as indicators of career success. These factors can directly impact local chapter participation. Career development can certainly be enhanced by active participation in the local chapter of a professional association.

  10. Career development through local chapter involvement: perspectives from chapter members.

    PubMed

    Thomas, Melissa; Inniss-Richter, Zipporah; Mata, Holly; Cottrell, Randall R

    2013-07-01

    The importance of career development in professional organizations has been noted in the literature. Personal and professional benefits of membership regardless of discipline can be found across the career spectrum from student to executive. The benefits of professional membership with respect to career development in local chapter organizations have seldom been studied. Local chapter participation may offer significant career development opportunities for the practitioner, faculty member, and student. The purpose of this study was to explore the importance of local chapter involvement to the career development of health education practitioners. An 18-item questionnaire was disseminated to the membership of three local SOPHE (Society for Public Health Education) chapters that explored the level of local chapter involvement and the impact of how specific professional development activities impacted career development. The results of the survey highlighted the importance of continuing education programs, networking, and leadership experience in developing one's career that are offered by local SOPHE chapter involvement. Making a positive impact in the community and earning the respect of one's peers were most often reported as indicators of career success. These factors can directly impact local chapter participation. Career development can certainly be enhanced by active participation in the local chapter of a professional association. PMID:23539263

  11. Instruct coders' manual

    NASA Technical Reports Server (NTRS)

    Friend, J.

    1971-01-01

    A manual designed both as an instructional manual for beginning coders and as a reference manual for the coding language INSTRUCT, is presented. The manual includes the major programs necessary to implement the teaching system and lists the limitation of current implementation. A detailed description is given of how to code a lesson, what buttons to push, and what utility programs to use. Suggestions for debugging coded lessons and the error messages that may be received during assembly or while running the lesson are given.

  12. Educacion Ambiental en las Escuelas: Creando una Programa que Funcione! (Environmental Education in the Schools: Creating a Program That Works!).

    ERIC Educational Resources Information Center

    Braus, Judy A.; Wood, David

    This book is a manual that enables teachers to formulate an effective program of environmental education across multiple grade levels and cultural settings. A section provides tips for using the book, followed by nine chapters dealing with different aspects of developing and implementing an environmental education program. Chapter 1 presents a…

  13. Human Rights: Respecting Our Differences, Teachers' Manual [And] Human Rights: Respecting Our Differences, Students' Manual.

    ERIC Educational Resources Information Center

    McCardle, Elizabeth, Ed.

    This unit on human rights designed for secondary students in Alberta, Canada includes both student and teacher manuals. Eleven chapters in the student manual examine what human rights are, the causes and effects of prejudice and discrimination, relevant laws, and social action. Each chapter includes readings followed by discussion questions and…

  14. Language Development Component: All Day Kindergarten Program 1990-91. Final Evaluation Report. Elementary Secondary Education Act--Chapter 1.

    ERIC Educational Resources Information Center

    Johnson, Jessie

    The All-Day Kindergarten (ADK) Program was implemented in the Columbus (Ohio) Public Schools in January 1972 to provide a full day of instruction to prepare underachieving kindergarten pupils for first grade. The ADK is an individualized, language-based program that reinforces the skills, concepts, and educational experiences taught in the regular…

  15. Reading Recovery Program 1990-91. Final Evaluation Report. Elementary and Secondary Education Act-Chapter 1.

    ERIC Educational Resources Information Center

    Pollock, John S.

    The purpose of the 1990-91 Reading Recovery Program in the Columbus, Ohio public schools was to provide early intervention to underachieving first-grade pupils who appeared unlikely to read successfully without intensive instruction. The program featured individualized one-on-one lessons provided by specially trained teachers. The lessons were…

  16. A Two-Year Report on the Experimental Freshman Year Program. Chapter VI, Summary, Conclusions, and Recommendations.

    ERIC Educational Resources Information Center

    Kibler, Robert J., Ed.

    Presented are the summary, conclusions, and recommendations after two years of the Experimental Freshman Year Program for underachieving high school graduates at Southern Illinois University. Findings are presented under four headings--(1) subjects' occupation or whereabouts in the year following their participation in the program, (2) retention…

  17. Children's Art Carnival Creative Reading Program 1986-87. E.C.I.A. Chapter I Final Evaluation Report.

    ERIC Educational Resources Information Center

    Guerrero, Frank; And Others

    The Children's Art Carnival (CAC) Creative Reading Program, a community arts and educational organization, combines instruction in reading with art activities. Operating in sites in Manhattan and Queens, New York, the program served 294 second to sixth grade students during the 1986-1987 school year. Students who scored poorly on the Degrees of…

  18. 48 CFR Appendix I to Chapter 2 - Policy and Procedures for the DOD Pilot Mentor-Protege Program

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... and Procedures for the DOD Pilot Mentor-Protege Program I-100Purpose. (a) This Appendix I to 48 CFR... establishment of long-term business relationships between protégé firms and such contractors. (b) Under the... the Program. I-101Definitions. I-101.1Historically Black college or university. An...

  19. NECAP: NASA's Energy-Cost Analysis Program. Part 1: User's manual

    NASA Technical Reports Server (NTRS)

    Henninger, R. H. (Editor)

    1975-01-01

    The NECAP is a sophisticated building design and energy analysis tool which has embodied within it all of the latest ASHRAE state-of-the-art techniques for performing thermal load calculation and energy usage predictions. It is a set of six individual computer programs which include: response factor program, data verification program, thermal load analysis program, variable temperature program, system and equipment simulation program, and owning and operating cost program. Each segment of NECAP is described, and instructions are set forth for preparing the required input data and for interpreting the resulting reports.

  20. Computer programs to characterize alloys and predict cyclic life using the total strain version of strainrange partitioning: Tutorial and users manual, version 1.0

    NASA Technical Reports Server (NTRS)

    Saltsman, James F.

    1992-01-01

    This manual presents computer programs for characterizing and predicting fatigue and creep-fatigue resistance of metallic materials in the high-temperature, long-life regime for isothermal and nonisothermal fatigue. The programs use the total strain version of Strainrange Partitioning (TS-SRP). An extensive database has also been developed in a parallel effort. This database is probably the largest source of high-temperature, creep-fatigue test data available in the public domain and can be used with other life prediction methods as well. This users manual, software, and database are all in the public domain and are available through COSMIC (382 East Broad Street, Athens, GA 30602; (404) 542-3265, FAX (404) 542-4807). Two disks accompany this manual. The first disk contains the source code, executable files, and sample output from these programs. The second disk contains the creep-fatigue data in a format compatible with these programs.

  1. Central Data Processing System (CDPS) user's manual: Solar heating and cooling program

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The software and data base management system required to assess the performance of solar heating and cooling systems installed at multiple sites is presented. The instrumentation data associated with these systems is collected, processed, and presented in a form which supported continuity of performance evaluation across all applications. The CDPS consisted of three major elements: communication interface computer, central data processing computer, and performance evaluation data base. Users of the performance data base were identified, and procedures for operation, and guidelines for software maintenance were outlined. The manual also defined the output capabilities of the CDPS in support of external users of the system.

  2. Industrial labor relations manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The NASA Industrial Labor Relations Manual provides internal guidelines and procedures to assist NASA Field Installations in dealing with contractor labor management disputes, Service Contract Act variance hearings, and to provide access of Labor Union Representatives to NASA for the purpose of maintaining schedules and goals in connection with vital NASA programs. This manual will be revised by page changes as revisions become necessary. Initial distribution of this manual has been made to NASA Headquarters and Field Installations.

  3. Programmer's manual for MMLE3, a general FORTRAN program for maximum likelihood parameter estimation

    NASA Technical Reports Server (NTRS)

    Maine, R. E.

    1981-01-01

    The MMLE3 is a maximum likelihood parameter estimation program capable of handling general bilinear dynamic equations of arbitrary order with measurement noise and/or state noise (process noise). The basic MMLE3 program is quite general and, therefore, applicable to a wide variety of problems. The basic program can interact with a set of user written problem specific routines to simplify the use of the program on specific systems. A set of user routines for the aircraft stability and control derivative estimation problem is provided with the program. The implementation of the program on specific computer systems is discussed. The structure of the program is diagrammed, and the function and operation of individual routines is described. Complete listings and reference maps of the routines are included on microfiche as a supplement. Four test cases are discussed; listings of the input cards and program output for the test cases are included on microfiche as a supplement.

  4. In Vivo Monitoring Program Manual, PNL-MA-574, Rev 5.1

    SciTech Connect

    Lynch, Timothy P.

    2011-09-12

    The following sections provide an overview of the administration for the In Vivo Monitoring Program (IVMP) for Hanford. This includes the organizational structure and program responsibilities; coordination of in vivo measurements; scheduling measurements; performing measurements; reporting results; and quality assurance.

  5. User's manual for RAD/EQUIL/1973: A general purpose radiation transport program

    NASA Technical Reports Server (NTRS)

    Nicolet, W. E.

    1973-01-01

    A procedure is described for implementing the RAD/EQUIL/1973 program, and instructions are given which allow the program input to be prepared, the output to be interpreted, the operating procedures identified which must be followed, and the meaning of the error messages to be understood. The structure of the program is described through a verbal description, a FORTRAN variables list, and a listing of the program.

  6. 32 CFR 2004.20 - National Industrial Security Program Operating Manual (NISPOM) [201(a)].

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 6 2011-07-01 2011-07-01 false National Industrial Security Program Operating... INFORMATION SECURITY OVERSIGHT OFFICE, NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Operations § 2004.20 National Industrial Security Program Operating...

  7. 32 CFR 2004.20 - National Industrial Security Program Operating Manual (NISPOM) [201(a)].

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 6 2013-07-01 2013-07-01 false National Industrial Security Program Operating... INFORMATION SECURITY OVERSIGHT OFFICE, NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Operations § 2004.20 National Industrial Security Program Operating...

  8. 32 CFR 2004.20 - National Industrial Security Program Operating Manual (NISPOM) [201(a)].

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 6 2012-07-01 2012-07-01 false National Industrial Security Program Operating... INFORMATION SECURITY OVERSIGHT OFFICE, NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Operations § 2004.20 National Industrial Security Program Operating...

  9. 32 CFR 2004.20 - National Industrial Security Program Operating Manual (NISPOM) [201(a)].

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 6 2014-07-01 2014-07-01 false National Industrial Security Program Operating... INFORMATION SECURITY OVERSIGHT OFFICE, NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Operations § 2004.20 National Industrial Security Program Operating...

  10. 32 CFR 2004.20 - National Industrial Security Program Operating Manual (NISPOM) [201(a)].

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false National Industrial Security Program Operating... INFORMATION SECURITY OVERSIGHT OFFICE, NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Operations § 2004.20 National Industrial Security Program Operating...

  11. User's manual for WDCSIM II wet/dry cooling computer program. Final report, October 1980

    SciTech Connect

    Guyer, E.C.; Brownell, D.L.

    1980-08-01

    A user's guide to the WDCSIM II computer program has been compiled. Instructions are provided for the application of the computer program to the modeling of the thermal performance and economics of combined wet- and dry-cooling systems for large steam-electric plants. A FORTRAN listing of the program is presented along with a sample output.

  12. Phase 1 user instruction manual. A geological formation - drill string dynamic interaction finite element program (GEODYN)

    SciTech Connect

    Tinianow, M.A.; Rotelli, R.L. Jr.; Baird, J.A.

    1984-06-01

    User instructions for the GEODYN Interactive Finite Element Computer Program are presented. The program is capable of performing the analysis of the three-dimensional transient dynamic response of a Polycrystalline Diamond Compact Bit - Bit Sub arising from the intermittent contact of the bit with the downhole rock formations. The program accommodates non-linear, time dependent, loading and boundary conditions.

  13. Training Manual Development Program: Dominion Bridge. Final Report. Organizational Needs Assessment of Workplace Literacy Skills & Development of Training Manuals for the Paint Department.

    ERIC Educational Resources Information Center

    McKeag, Janis

    To address specific workplace literacy needs within the steel fabrication sector in Manitoba, an organizational needs assessment was conducted training manuals were developed using literacy task analysis techniques. The organizational needs assessment assessed the general and workplace literacy tasks and demands of hourly workers at Dominion…

  14. WICHE Management Information Systems Program. Higher Education Facilities Planning and Management Manuals Project. (SAM-Space Analysis Manuals Project) Project Description.

    ERIC Educational Resources Information Center

    Western Interstate Commission for Higher Education, Boulder, CO.

    This report describes the basic objectives, assumptions, orientation and development of the Space Analysis Manuals Project. The main objective is to write and distribute a series of annuals describing methods and procedures for use by college and university personnel in planning and managing college and university facilities. One of the basic…

  15. Coupled rotor/airframe vibration analysis program manual. Volume 2: Sample input and output listings

    NASA Technical Reports Server (NTRS)

    Cassarino, S.; Sopher, R.

    1982-01-01

    Sample input and output listings obtained with the base program (SIMVIB) of the coupled rotor/airframe vibration analysis and the external programs, G400/F389 and E927 are presented. Results for five of the base program test cases are shown. They represent different applications of the SIMVIB program to study the vibration characteristics of various dynamic configurations. Input and output listings obtained for one cycle of the G400/F389 coupled program are presented. Results from the rotor aeroelastic analysis E927 also appear. A brief description of the check cases is provided. A summary of the check cases for all the external programs interacting with the SIMVIB program is illustrated.

  16. 48 CFR Appendix I to Chapter 2 - Policy and Procedures for the DoD Pilot Mentor-Protege Program

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... personnel in— (i) General business management, including organizational management, financial management... and Procedures for the DoD Pilot Mentor-Protege Program I-100Purpose. (a) This Appendix I to 48 CFR... determined by the Secretary of Education to meet the requirements of 34 CFR 608.2. The term also means...

  17. 48 CFR Appendix I to Chapter 2 - Policy and Procedures for the DoD Pilot Mentor-Protege Program

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... personnel in— (i) General business management, including organizational management, financial management... and Procedures for the DoD Pilot Mentor-Protege Program I-100Purpose. (a) This Appendix I to 48 CFR... determined by the Secretary of Education to meet the requirements of 34 CFR 608.2. The term also means...

  18. 48 CFR Appendix I to Chapter 2 - Policy and Procedures for the DoD Pilot Mentor-Protege Program

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... personnel in— (i) General business management, including organizational management, financial management... and Procedures for the DoD Pilot Mentor-Protege Program I-100Purpose. (a) This Appendix I to 48 CFR... determined by the Secretary of Education to meet the requirements of 34 CFR 608.2. The term also means...

  19. Guidelines for Local Educational Agencies for the Participation of Private School Students in ECIA, Chapter 1 Programs.

    ERIC Educational Resources Information Center

    California State Dept. of Education, Sacramento. Office of Compensatory Education.

    This document's purpose is to assist local educational agencies in providing compensatory education services to students in private schools and to provide clarification about compensatory education program responsibilities as mandated by the Education Consolidation and Improvement Act (ECIA) of 1981. The first of the document's two major parts…

  20. PLANS; a finite element program for nonlinear analysis of structures. Volume 2: User's manual

    NASA Technical Reports Server (NTRS)

    Pifko, A.; Armen, H., Jr.; Levy, A.; Levine, H.

    1977-01-01

    The PLANS system, rather than being one comprehensive computer program, is a collection of finite element programs used for the nonlinear analysis of structures. This collection of programs evolved and is based on the organizational philosophy in which classes of analyses are treated individually based on the physical problem class to be analyzed. Each of the independent finite element computer programs of PLANS, with an associated element library, can be individually loaded and used to solve the problem class of interest. A number of programs have been developed for material nonlinear behavior alone and for combined geometric and material nonlinear behavior. The usage, capabilities, and element libraries of the current programs include: (1) plastic analysis of built-up structures where bending and membrane effects are significant, (2) three dimensional elastic-plastic analysis, (3) plastic analysis of bodies of revolution, and (4) material and geometric nonlinear analysis of built-up structures.