Progressive Damage Modeling of Notched Composites

NASA Technical Reports Server (NTRS)

Aitharaju, Venkat; Aashat, Satvir; Kia, Hamid; Satyanarayana, Arunkumar; Bogert, Philip

2016-01-01

There is an increased interest in using non-crimp fabric reinforced composites for primary and secondary structural weight savings in high performance automobile applications. However, one of the main challenges in implementing these composites is the lack of understanding of damage progression under a wide variety of loading conditions for general configurations. Towards that end, researchers at GM and NASA are developing new damage models to predict accurately the progressive failure of these composites. In this investigation, the developed progressive failure analysis model was applied to study damage progression in center-notched and open-hole tension specimens for various laminate schemes. The results of a detailed study with respect to the effect of element size on the analysis outcome are presented.

Micromechanics-Based Progressive Failure Analysis of Composite Laminates Using Different Constituent Failure Theories

NASA Technical Reports Server (NTRS)

Moncada, Albert M.; Chattopadhyay, Aditi; Bednarcyk, Brett A.; Arnold, Steven M.

2008-01-01

Predicting failure in a composite can be done with ply level mechanisms and/or micro level mechanisms. This paper uses the Generalized Method of Cells and High-Fidelity Generalized Method of Cells micromechanics theories, coupled with classical lamination theory, as implemented within NASA's Micromechanics Analysis Code with Generalized Method of Cells. The code is able to implement different failure theories on the level of both the fiber and the matrix constituents within a laminate. A comparison is made among maximum stress, maximum strain, Tsai-Hill, and Tsai-Wu failure theories. To verify the failure theories the Worldwide Failure Exercise (WWFE) experiments have been used. The WWFE is a comprehensive study that covers a wide range of polymer matrix composite laminates. The numerical results indicate good correlation with the experimental results for most of the composite layups, but also point to the need for more accurate resin damage progression models.

Simulating Progressive Damage of Notched Composite Laminates with Various Lamination Schemes

NASA Astrophysics Data System (ADS)

Mandal, B.; Chakrabarti, A.

2017-05-01

A three dimensional finite element based progressive damage model has been developed for the failure analysis of notched composite laminates. The material constitutive relations and the progressive damage algorithms are implemented into finite element code ABAQUS using user-defined subroutine UMAT. The existing failure criteria for the composite laminates are modified by including the failure criteria for fiber/matrix shear damage and delamination effects. The proposed numerical model is quite efficient and simple compared to other progressive damage models available in the literature. The efficiency of the present constitutive model and the computational scheme is verified by comparing the simulated results with the results available in the literature. A parametric study has been carried out to investigate the effect of change in lamination scheme on the failure behaviour of notched composite laminates.

Oil Analysis.

DTIC Science & Technology

1982-08-23

LUBRICATION, FAILURE PROGRESSION WNITORING OIL-ANALYSIS, FAILURE ANALYSIS, TRIBOLOGY WEAR DEBRIS ANALYSIS, WEAR REGIMS DIAGNOSTICS, BENCH TESTING, FERROGRApHy ...Spectrometric Oil Analysis . ............... 400 G. Analytical Ferrography ............................. 411 3 NAEC-92-153 TABLE OF CONTENTS (Continued...of ferrography entry deposit mnicrographs of these sequences, which can be directly related to sample debris concentration levels. These micrographs

A Framework for Performing Multiscale Stochastic Progressive Failure Analysis of Composite Structures

NASA Technical Reports Server (NTRS)

Bednarcyk, Brett A.; Arnold, Steven M.

2006-01-01

A framework is presented that enables coupled multiscale analysis of composite structures. The recently developed, free, Finite Element Analysis - Micromechanics Analysis Code (FEAMAC) software couples the Micromechanics Analysis Code with Generalized Method of Cells (MAC/GMC) with ABAQUS to perform micromechanics based FEA such that the nonlinear composite material response at each integration point is modeled at each increment by MAC/GMC. As a result, the stochastic nature of fiber breakage in composites can be simulated through incorporation of an appropriate damage and failure model that operates within MAC/GMC on the level of the fiber. Results are presented for the progressive failure analysis of a titanium matrix composite tensile specimen that illustrate the power and utility of the framework and address the techniques needed to model the statistical nature of the problem properly. In particular, it is shown that incorporating fiber strength randomness on multiple scales improves the quality of the simulation by enabling failure at locations other than those associated with structural level stress risers.

A Framework for Performing Multiscale Stochastic Progressive Failure Analysis of Composite Structures

NASA Technical Reports Server (NTRS)

Bednarcyk, Brett A.; Arnold, Steven M.

2007-01-01

A framework is presented that enables coupled multiscale analysis of composite structures. The recently developed, free, Finite Element Analysis-Micromechanics Analysis Code (FEAMAC) software couples the Micromechanics Analysis Code with Generalized Method of Cells (MAC/GMC) with ABAQUS to perform micromechanics based FEA such that the nonlinear composite material response at each integration point is modeled at each increment by MAC/GMC. As a result, the stochastic nature of fiber breakage in composites can be simulated through incorporation of an appropriate damage and failure model that operates within MAC/GMC on the level of the fiber. Results are presented for the progressive failure analysis of a titanium matrix composite tensile specimen that illustrate the power and utility of the framework and address the techniques needed to model the statistical nature of the problem properly. In particular, it is shown that incorporating fiber strength randomness on multiple scales improves the quality of the simulation by enabling failure at locations other than those associated with structural level stress risers.

Progressive Failure And Life Prediction of Ceramic and Textile Composites

NASA Technical Reports Server (NTRS)

Xue, David Y.; Shi, Yucheng; Katikala, Madhu; Johnston, William M., Jr.; Card, Michael F.

1998-01-01

An engineering approach to predict the fatigue life and progressive failure of multilayered composite and textile laminates is presented. Analytical models which account for matrix cracking, statistical fiber failures and nonlinear stress-strain behavior have been developed for both composites and textiles. The analysis method is based on a combined micromechanics, fracture mechanics and failure statistics analysis. Experimentally derived empirical coefficients are used to account for the interface of fiber and matrix, fiber strength, and fiber-matrix stiffness reductions. Similar approaches were applied to textiles using Repeating Unit Cells. In composite fatigue analysis, Walker's equation is applied for matrix fatigue cracking and Heywood's formulation is used for fiber strength fatigue degradation. The analysis has been compared with experiment with good agreement. Comparisons were made with Graphite-Epoxy, C/SiC and Nicalon/CAS composite materials. For textile materials, comparisons were made with triaxial braided and plain weave materials under biaxial or uniaxial tension. Fatigue predictions were compared with test data obtained from plain weave C/SiC materials tested at AS&M. Computer codes were developed to perform the analysis. Composite Progressive Failure Analysis for Laminates is contained in the code CPFail. Micromechanics Analysis for Textile Composites is contained in the code MicroTex. Both codes were adapted to run as subroutines for the finite element code ABAQUS and CPFail-ABAQUS and MicroTex-ABAQUS. Graphic user interface (GUI) was developed to connect CPFail and MicroTex with ABAQUS.

An overview of computational simulation methods for composite structures failure and life analysis

NASA Technical Reports Server (NTRS)

Chamis, Christos C.

1993-01-01

Three parallel computational simulation methods are being developed at the LeRC Structural Mechanics Branch (SMB) for composite structures failure and life analysis: progressive fracture CODSTRAN; hierarchical methods for high-temperature composites; and probabilistic evaluation. Results to date demonstrate that these methods are effective in simulating composite structures failure/life/reliability.

The effect of Crataegus oxycantha Special Extract WS 1442 on clinical progression in patients with mild to moderate symptoms of heart failure.

PubMed

Zick, Suzanna M; Gillespie, Brenda; Aaronson, Keith D

2008-06-01

To examine whether hawthorn (Crataegus Special Extract WS 1442 {CSE}) inhibits progression in heart failure (HF) patients. We performed a retrospective analysis of data from the HERB CHF study in which patients with mild to moderate HF were randomised to either CSE 900 mg or placebo for 6 months. The primary outcome was time to progression of HF (HF death, hospitalisation, or sustained increase in diuretics) as assessed by log-rank tests and by Cox modelling. Progression of HF occurred in 46.6% of the CSE and 43.3% of the placebo groups (OR 1.14, 95% CI=0.56, 2.35: p=0.86). Patients receiving CSE were 3.9 times (95% CI=1.1-13.7: p=0.035) more likely to experience HF progression at baseline. In adjusted analysis, the risk of having early HF progression in the CSE group increased to 6.4 (95% CI=1.5, 26.5: p=0.011). In patients with LVEF< or =35%, those taking CSE were at significantly greater risk (3.2, 95% CI=1.3, 8.3: p=0.02) than the placebo group. CSE does not reduce heart failure progression in patients who have HF. CSE appears to increase the early risk of HF progression.

Modeling Geometry and Progressive Failure of Material Interfaces in Plain Weave Composites

NASA Technical Reports Server (NTRS)

Hsu, Su-Yuen; Cheng, Ron-Bin

2010-01-01

A procedure combining a geometrically nonlinear, explicit-dynamics contact analysis, computer aided design techniques, and elasticity-based mesh adjustment is proposed to efficiently generate realistic finite element models for meso-mechanical analysis of progressive failure in textile composites. In the procedure, the geometry of fiber tows is obtained by imposing a fictitious expansion on the tows. Meshes resulting from the procedure are conformal with the computed tow-tow and tow-matrix interfaces but are incongruent at the interfaces. The mesh interfaces are treated as cohesive contact surfaces not only to resolve the incongruence but also to simulate progressive failure. The method is employed to simulate debonding at the material interfaces in a ceramic-matrix plain weave composite with matrix porosity and in a polymeric matrix plain weave composite without matrix porosity, both subject to uniaxial cyclic loading. The numerical results indicate progression of the interfacial damage during every loading and reverse loading event in a constant strain amplitude cyclic process. However, the composites show different patterns of damage advancement.

Tapered Roller Bearing Damage Detection Using Decision Fusion Analysis

NASA Technical Reports Server (NTRS)

Dempsey, Paula J.; Kreider, Gary; Fichter, Thomas

2006-01-01

A diagnostic tool was developed for detecting fatigue damage of tapered roller bearings. Tapered roller bearings are used in helicopter transmissions and have potential for use in high bypass advanced gas turbine aircraft engines. A diagnostic tool was developed and evaluated experimentally by collecting oil debris data from failure progression tests conducted using health monitoring hardware. Failure progression tests were performed with tapered roller bearings under simulated engine load conditions. Tests were performed on one healthy bearing and three pre-damaged bearings. During each test, data from an on-line, in-line, inductance type oil debris sensor and three accelerometers were monitored and recorded for the occurrence of bearing failure. The bearing was removed and inspected periodically for damage progression throughout testing. Using data fusion techniques, two different monitoring technologies, oil debris analysis and vibration, were integrated into a health monitoring system for detecting bearing surface fatigue pitting damage. The data fusion diagnostic tool was evaluated during bearing failure progression tests under simulated engine load conditions. This integrated system showed improved detection of fatigue damage and health assessment of the tapered roller bearings as compared to using individual health monitoring technologies.

The Effect of Crataegus oxycantha Special Extract WSS 1442 on Clinical Progression in Patients with Mild to Moderate Symptoms of Heart Failure

PubMed Central

Zick, Suzanna M.; Gillespie, Brenda; Aaronson, Keith D.

2008-01-01

Aim To examine whether hawthorn (Crataegus Special Extract WS 1442 {CSE}) inhibits progression in heart failure (HF) patients. Methods We performed a retrospective analysis of data from the HERB CHF study in which patients with mild to moderate HF were randomised to either CSE 900 mg or placebo for 6 months. The primary outcome was time to progression of HF (HF death, hospitalisation, or sustained increase in diuretics) as assessed by log-rank tests and by Cox modelling. Results Progression of HF occurred in 46.6% of the CSE and 43.3% of the placebo groups (OR 1.14, 95% CI = 0.56, 2.35: p = 0.86). Patients receiving CSE were 3.9 times (95% CI = 1.1 – 13.7: p = 0.035) more likely to experience HF progression at baseline. In adjusted analysis, the risk of having early HF progression in the CSE group increased to 6.4 (95% CI = 1.5, 26.5: p = 0.011). In patients with LVEF 35%, those taking CSE were at significantly greater risk (3.2, 95% CI = 1.3, 8.3: p = 0.02) than the placebo group. Conclusions CSE does not reduce heart failure progression in patients who have HF. CSE appears to increase the early risk of HF progression. PMID:18490196

Effective properties of dispersed phase reinforced composite materials with perfect and imperfect interfaces

NASA Astrophysics Data System (ADS)

Han, Ru

This thesis focuses on the analysis of dispersed phase reinforced composite materials with perfect as well as imperfect interfaces using the Boundary Element Method (BEM). Two problems of interest are considered, namely, to determine the limitations in the use of effective properties and the analysis of failure progression at the inclusion-matrix interface. The effective moduli (effective Young's modulus, effective Poisson's ratio, effective shear modulus, and effective bulk modulus) of composite materials can be determined at the mesoscopic level using three-dimensional parallel BEM simulations. By comparing the mesoscopic BEM results and the macroscopic results based on effective properties, limitations in the effective property approach can be determined. Decohesion is an important failure mode associated with fiber-reinforced composite materials. Analysis of failure progression at the fiber-matrix interface in fiber-reinforced composite materials is considered using a softening decohesion model consistent with thermodynamic concepts. In this model, the initiation of failure is given directly by a failure criterion. Damage is interpreted by the development of a discontinuity of displacement. The formulation describing the potential development of damage is governed by a discrete decohesive constitutive equation. Numerical simulations are performed using the direct boundary element method. Incremental decohesion simulations illustrate the progressive evolution of debonding zones and the propagation of cracks along the interfaces. The effect of decohesion on the macroscopic response of composite materials is also investigated.

Transvaginal ultrasonographic cervical measurement in predicting failed labor induction and cesarean delivery for failure to progress in nulliparous women.

PubMed

Park, Kyo Hoon

2007-08-01

The aim of this study was to evaluate the value of transvaginal sonographic cervical measurement in predicting failed labor induction and cesarean delivery for failure to progress in nulliparous women. One hundred and sixty-one women scheduled for labor induction underwent transvaginal ultrasonography and digital cervical examinations. Logistic regression demonstrated that cervical length and gestational age at induction, but not the Bishop score, significantly and independently predicted failed labor induction. According to the receiver operating characteristic curves analysis, the best cut-off value of cervical length for predicting failed labor induction was 28 mm, with a sensitivity of 62% and a specificity of 60%. In terms of the likelihood of a cesarean delivery for failure to progress as the outcome variable, logistic regression indicated that maternal height and birth weight, but not cervical length or Bishop score, were significantly and independently associated with an increased risk of cesarean delivery for failure to progress. Transvaginal sonographic measurements of cervical length thus independently predicted failed labor induction in nulliparous women. However, the relatively poor predictive performance of this test undermines its clinical usefulness as a predictor of failed labor induction. Moreover, cervical length appears to have a poor predictive value for the likelihood of a cesarean delivery for failure to progress.

A Large-scale Finite Element Model on Micromechanical Damage and Failure of Carbon Fiber/Epoxy Composites Including Thermal Residual Stress

NASA Astrophysics Data System (ADS)

Liu, P. F.; Li, X. K.

2018-06-01

The purpose of this paper is to study micromechanical progressive failure properties of carbon fiber/epoxy composites with thermal residual stress by finite element analysis (FEA). Composite microstructures with hexagonal fiber distribution are used for the representative volume element (RVE), where an initial fiber breakage is assumed. Fiber breakage with random fiber strength is predicted using Monte Carlo simulation, progressive matrix damage is predicted by proposing a continuum damage mechanics model and interface failure is simulated using Xu and Needleman's cohesive model. Temperature dependent thermal expansion coefficients for epoxy matrix are used. FEA by developing numerical codes using ANSYS finite element software is divided into two steps: 1. Thermal residual stresses due to mismatch between fiber and matrix are calculated; 2. Longitudinal tensile load is further exerted on the RVE to perform progressive failure analysis of carbon fiber/epoxy composites. Numerical convergence is solved by introducing the viscous damping effect properly. The extended Mori-Tanaka method that considers interface debonding is used to get homogenized mechanical responses of composites. Three main results by FEA are obtained: 1. the real-time matrix cracking, fiber breakage and interface debonding with increasing tensile strain is simulated. 2. the stress concentration coefficients on neighbouring fibers near the initial broken fiber and the axial fiber stress distribution along the broken fiber are predicted, compared with the results using the global and local load-sharing models based on the shear-lag theory. 3. the tensile strength of composite by FEA is compared with those by the shear-lag theory and experiments. Finally, the tensile stress-strain curve of composites by FEA is applied to the progressive failure analysis of composite pressure vessel.

A Large-scale Finite Element Model on Micromechanical Damage and Failure of Carbon Fiber/Epoxy Composites Including Thermal Residual Stress

NASA Astrophysics Data System (ADS)

Liu, P. F.; Li, X. K.

2017-09-01

The purpose of this paper is to study micromechanical progressive failure properties of carbon fiber/epoxy composites with thermal residual stress by finite element analysis (FEA). Composite microstructures with hexagonal fiber distribution are used for the representative volume element (RVE), where an initial fiber breakage is assumed. Fiber breakage with random fiber strength is predicted using Monte Carlo simulation, progressive matrix damage is predicted by proposing a continuum damage mechanics model and interface failure is simulated using Xu and Needleman's cohesive model. Temperature dependent thermal expansion coefficients for epoxy matrix are used. FEA by developing numerical codes using ANSYS finite element software is divided into two steps: 1. Thermal residual stresses due to mismatch between fiber and matrix are calculated; 2. Longitudinal tensile load is further exerted on the RVE to perform progressive failure analysis of carbon fiber/epoxy composites. Numerical convergence is solved by introducing the viscous damping effect properly. The extended Mori-Tanaka method that considers interface debonding is used to get homogenized mechanical responses of composites. Three main results by FEA are obtained: 1. the real-time matrix cracking, fiber breakage and interface debonding with increasing tensile strain is simulated. 2. the stress concentration coefficients on neighbouring fibers near the initial broken fiber and the axial fiber stress distribution along the broken fiber are predicted, compared with the results using the global and local load-sharing models based on the shear-lag theory. 3. the tensile strength of composite by FEA is compared with those by the shear-lag theory and experiments. Finally, the tensile stress-strain curve of composites by FEA is applied to the progressive failure analysis of composite pressure vessel.

N-acteyl-ß-D-glucosaminidase and kidney injury molecule-1: New predictors for long-term progression of chronic kidney disease in patients with heart failure.

PubMed

Jungbauer, Carsten G; Uecer, Ekrem; Stadler, Stefan; Birner, Christoph; Buchner, Stefan; Maier, Lars S; Luchner, Andreas

2016-06-01

Patients with chronic heart failure (CHF) are often characterized by the cardiorenal syndrome (CRS). The aim of the present study was to assess whether novel markers of kidney injury are able to predict progression of chronic kidney disease (CKD) in patients with CHF. New renal biomarkers, N-acteyl-ß-D-glucosaminidase (NAG), kidney injury molecule-1 (KIM-1) and Neutrophil Gelatinase-Associated Lipocalin (NGAL), were assessed from urine samples of 149 patients with chronic heart failure. During a 5-year-follow-up, renal function was assessed by creatinine and estimated glomerular filtration rate (eGFR CKD EPI) and was available for 138 patients. Further, data regarding all-cause mortality was obtained. Twenty-six patients (18.8%) developed a progression of CKD during the follow-up period, as defined by decline in eGFR category accompanied by a ≥25% drop in eGFR form baseline. No difference regarding age, sex, body mass index, hypertension, diabetes or EF was present between patients with and without CKD progression (each P = n.s.). At baseline, creatinine concentrations and eGFR were significantly different between both groups (sCr: 1.50 ± 0.67 vs 1.04 ± 0.37, P = < 0.001; eGFR: 47.8 ± 12.3 vs. 77.3 ± 23.5 mL/min per 1.73m(2) , each P < 0.001). In a Kaplan-Meier-analysis, KIM-1 and NAG were significant predictors for CKD progression (both P < 0.05). In Cox regression analysis, NAG > median (OR 3.25,P = 0.013), initial eGFR (OR 0.94, P < 0.001) and diuretic use (OR 3.92, P = 0.001) were independent predictors of CKD progression. Further, KIM-1 and NAG were also independent predictors of a combined endpoint of CKD progression and all-cause mortality by Cox regression analysis (each P < 0.05). The combination of both markers showed additive value regarding both endpoints. NGAL showed no association with CKD progression. During long-term follow-up chronic heart failure patients with CKD show a relevant disease progression. The current study emphasizes a strong association of the tubular biomarkers NAG and KIM-1 with CKD progression in chronic heart failure and suggests their usefulness as cardiorenal markers. © 2015 Asian Pacific Society of Nephrology.

Guidelines for VCCT-Based Interlaminar Fatigue and Progressive Failure Finite Element Analysis

NASA Technical Reports Server (NTRS)

Deobald, Lyle R.; Mabson, Gerald E.; Engelstad, Steve; Prabhakar, M.; Gurvich, Mark; Seneviratne, Waruna; Perera, Shenal; O'Brien, T. Kevin; Murri, Gretchen; Ratcliffe, James;

Development of GENOA Progressive Failure Parallel Processing Software Systems

NASA Technical Reports Server (NTRS)

Abdi, Frank; Minnetyan, Levon

1999-01-01

A capability consisting of software development and experimental techniques has been developed and is described. The capability is integrated into GENOA-PFA to model polymer matrix composite (PMC) structures. The capability considers the physics and mechanics of composite materials and structure by integration of a hierarchical multilevel macro-scale (lamina, laminate, and structure) and micro scale (fiber, matrix, and interface) simulation analyses. The modeling involves (1) ply layering methodology utilizing FEM elements with through-the-thickness representation, (2) simulation of effects of material defects and conditions (e.g., voids, fiber waviness, and residual stress) on global static and cyclic fatigue strengths, (3) including material nonlinearities (by updating properties periodically) and geometrical nonlinearities (by Lagrangian updating), (4) simulating crack initiation. and growth to failure under static, cyclic, creep, and impact loads. (5) progressive fracture analysis to determine durability and damage tolerance. (6) identifying the percent contribution of various possible composite failure modes involved in critical damage events. and (7) determining sensitivities of failure modes to design parameters (e.g., fiber volume fraction, ply thickness, fiber orientation. and adhesive-bond thickness). GENOA-PFA progressive failure analysis is now ready for use to investigate the effects on structural responses to PMC material degradation from damage induced by static, cyclic (fatigue). creep, and impact loading in 2D/3D PMC structures subjected to hygrothermal environments. Its use will significantly facilitate targeting design parameter changes that will be most effective in reducing the probability of a given failure mode occurring.

A model for the progressive failure of laminated composite structural components

NASA Technical Reports Server (NTRS)

Allen, D. H.; Lo, D. C.

1991-01-01

Laminated continuous fiber polymeric composites are capable of sustaining substantial load induced microstructural damage prior to component failure. Because this damage eventually leads to catastrophic failure, it is essential to capture the mechanics of progressive damage in any cogent life prediction model. For the past several years the authors have been developing one solution approach to this problem. In this approach the mechanics of matrix cracking and delamination are accounted for via locally averaged internal variables which account for the kinematics of microcracking. Damage progression is predicted by using phenomenologically based damage evolution laws which depend on the load history. The result is a nonlinear and path dependent constitutive model which has previously been implemented to a finite element computer code for analysis of structural components. Using an appropriate failure model, this algorithm can be used to predict component life. In this paper the model will be utilized to demonstrate the ability to predict the load path dependence of the damage and stresses in plates subjected to fatigue loading.

Investigation of Tapered Roller Bearing Damage Detection Using Oil Debris Analysis

NASA Technical Reports Server (NTRS)

Dempsey, Paula J.; Krieder, Gary; Fichter, Thomas

2006-01-01

A diagnostic tool was developed for detecting fatigue damage to tapered roller bearings. Tapered roller bearings are used in helicopter transmissions and have potential for use in high bypass advanced gas turbine aircraft engines. This diagnostic tool was developed and evaluated experimentally by collecting oil debris data from failure progression tests performed by The Timken Company in their Tapered Roller Bearing Health Monitoring Test Rig. Failure progression tests were performed under simulated engine load conditions. Tests were performed on one healthy bearing and three predamaged bearings. During each test, data from an on-line, in-line, inductance type oil debris sensor was monitored and recorded for the occurrence of debris generated during failure of the bearing. The bearing was removed periodically for inspection throughout the failure progression tests. Results indicate the accumulated oil debris mass is a good predictor of damage on tapered roller bearings. The use of a fuzzy logic model to enable an easily interpreted diagnostic metric was proposed and demonstrated.

Fractography, NDE, and fracture mechanics applications in failure analysis studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morin, C.R.; Shipley, R.J.; Wilkinson, J.A.

1994-10-01

While identification of the precise mode of a failure can lead logically to the underlying cause, a thorough failure investigation requires much more than just the identification of a specific metallurgical mechanism, for example, fatigue, creep, stress corrosion cracking, etc. Failures involving fracture provide good illustrations of this concept. An initial step in characterizing fracture surfaces is often the identification of an origin or origins. However, the analysis should not stop there. If the origin is associated with a discontinuity, the manner in which it was formed must also be addressed. The stresses that would have existed at the originmore » must be determined and compared with material properties to determine whether or not a crack should have initiated and propagated during normal operation. Many critical components are inspected throughout their lives by nondestructive methods. When a crack progresses to failure, its nondetection at earlier inspections must also be understood. Careful study of the fracture surface combined with crack growth analysis based on fracture mechanics can provide an estimate of the crack length at the times of previous inspections. An important issue often overlooked in such studies is how processing of parts during manufacture or rework affects the probability of detection of such cracks. The ultimate goal is to understand thoroughly the progression of the failure, to understand the root cause(s), and to design appropriate corrective action(s) to minimize recurrence.« less

Electromechanical actuators affected by multiple failures: Prognostic method based on spectral analysis techniques

NASA Astrophysics Data System (ADS)

Belmonte, D.; Vedova, M. D. L. Dalla; Ferro, C.; Maggiore, P.

2017-06-01

The proposal of prognostic algorithms able to identify precursors of incipient failures of primary flight command electromechanical actuators (EMA) is beneficial for the anticipation of the incoming failure: an early and correct interpretation of the failure degradation pattern, in fact, can trig an early alert of the maintenance crew, who can properly schedule the servomechanism replacement. An innovative prognostic model-based approach, able to recognize the EMA progressive degradations before his anomalous behaviors become critical, is proposed: the Fault Detection and Identification (FDI) of the considered incipient failures is performed analyzing proper system operational parameters, able to put in evidence the corresponding degradation path, by means of a numerical algorithm based on spectral analysis techniques. Subsequently, these operational parameters will be correlated with the actual EMA health condition by means of failure maps created by a reference monitoring model-based algorithm. In this work, the proposed method has been tested in case of EMA affected by combined progressive failures: in particular, partial stator single phase turn to turn short-circuit and rotor static eccentricity are considered. In order to evaluate the prognostic method, a numerical test-bench has been conceived. Results show that the method exhibit adequate robustness and a high degree of confidence in the ability to early identify an eventual malfunctioning, minimizing the risk of fake alarms or unannounced failures.

Progressive Damage and Failure Analysis of Composite Laminates

NASA Astrophysics Data System (ADS)

Joseph, Ashith P. K.

Composite materials are widely used in various industries for making structural parts due to higher strength to weight ratio, better fatigue life, corrosion resistance and material property tailorability. To fully exploit the capability of composites, it is required to know the load carrying capacity of the parts made of them. Unlike metals, composites are orthotropic in nature and fails in a complex manner under various loading conditions which makes it a hard problem to analyze. Lack of reliable and efficient failure analysis tools for composites have led industries to rely more on coupon and component level testing to estimate the design space. Due to the complex failure mechanisms, composite materials require a very large number of coupon level tests to fully characterize the behavior. This makes the entire testing process very time consuming and costly. The alternative is to use virtual testing tools which can predict the complex failure mechanisms accurately. This reduces the cost only to it's associated computational expenses making significant savings. Some of the most desired features in a virtual testing tool are - (1) Accurate representation of failure mechanism: Failure progression predicted by the virtual tool must be same as those observed in experiments. A tool has to be assessed based on the mechanisms it can capture. (2) Computational efficiency: The greatest advantages of a virtual tools are the savings in time and money and hence computational efficiency is one of the most needed features. (3) Applicability to a wide range of problems: Structural parts are subjected to a variety of loading conditions including static, dynamic and fatigue conditions. A good virtual testing tool should be able to make good predictions for all these different loading conditions. The aim of this PhD thesis is to develop a computational tool which can model the progressive failure of composite laminates under different quasi-static loading conditions. The analysis tool is validated by comparing the simulations against experiments for a selected number of quasi-static loading cases.

Design and implementation of a novel mechanical testing system for cellular solids.

PubMed

Nazarian, Ara; Stauber, Martin; Müller, Ralph

2005-05-01

Cellular solids constitute an important class of engineering materials encompassing both man-made and natural constructs. Materials such as wood, cork, coral, and cancellous bone are examples of cellular solids. The structural analysis of cellular solid failure has been limited to 2D sections to illustrate global fracture patterns. Due to the inherent destructiveness of 2D methods, dynamic assessment of fracture progression has not been possible. Image-guided failure assessment (IGFA), a noninvasive technique to analyze 3D progressive bone failure, has been developed utilizing stepwise microcompression in combination with time-lapsed microcomputed tomographic imaging (microCT). This method allows for the assessment of fracture progression in the plastic region, where much of the structural deformation/energy absorption is encountered in a cellular solid. Therefore, the goal of this project was to design and fabricate a novel micromechanical testing system to validate the effectiveness of the stepwise IGFA technique compared to classical continuous mechanical testing, using a variety of engineered and natural cellular solids. In our analysis, we found stepwise compression to be a valid approach for IGFA with high precision and accuracy comparable to classical continuous testing. Therefore, this approach complements the conventional mechanical testing methods by providing visual insight into the failure propagation mechanisms of cellular solids. (c) 2005 Wiley Periodicals, Inc.

Plasma microRNAs serve as biomarkers of therapeutic efficacy and disease progression in hypertension-induced heart failure.

PubMed

Dickinson, Brent A; Semus, Hillary M; Montgomery, Rusty L; Stack, Christianna; Latimer, Paul A; Lewton, Steven M; Lynch, Joshua M; Hullinger, Thomas G; Seto, Anita G; van Rooij, Eva

2013-06-01

Recent studies have shown that microRNAs (miRNAs), besides being potent regulators of gene expression, can additionally serve as circulating biomarkers of disease. The aim of this study is to determine if plasma miRNAs can be used as indicators of disease progression or therapeutic efficacy in hypertension-induced heart disease. In order to define circulating miRNAs that change during hypertension-induced heart failure and that respond to therapeutic treatment, we performed miRNA arrays on plasma RNA from hypertensive rats that show signs of heart failure. Array analysis indicated that approximately one-third of the miRNAs on the array are detectable in plasma. Quantitative real-time polymerase chain reaction (PCR) analysis for a selected panel of miRNAs indicated that circulating levels of miR-16, miR-20b, miR-93, miR-106b, miR-223, and miR-423-5p were significantly increased in response to hypertension-induced heart failure, while this effect was blunted in response to treatment with antimiR-208a as well as an ACE inhibitor. Moreover, treatment with antimiR-208a resulted in a dramatic increase in one miRNA, miR-19b. A time course study indicated that several of these miRNA changes track with disease progression. Circulating levels of miRNAs are responsive to therapeutic interventions and change during the progression of hypertension-induced heart disease.

Micromechanics Fatigue Damage Analysis Modeling for Fabric Reinforced Ceramic Matrix Composites

NASA Technical Reports Server (NTRS)

Min, J. B.; Xue, D.; Shi, Y.

2013-01-01

A micromechanics analysis modeling method was developed to analyze the damage progression and fatigue failure of fabric reinforced composite structures, especially for the brittle ceramic matrix material composites. A repeating unit cell concept of fabric reinforced composites was used to represent the global composite structure. The thermal and mechanical properties of the repeating unit cell were considered as the same as those of the global composite structure. The three-phase micromechanics, the shear-lag, and the continuum fracture mechanics models were integrated with a statistical model in the repeating unit cell to predict the progressive damages and fatigue life of the composite structures. The global structure failure was defined as the loss of loading capability of the repeating unit cell, which depends on the stiffness reduction due to material slice failures and nonlinear material properties in the repeating unit cell. The present methodology is demonstrated with the analysis results evaluated through the experimental test performed with carbon fiber reinforced silicon carbide matrix plain weave composite specimens.

Failure of Non-Circular Composite Cylinders

NASA Technical Reports Server (NTRS)

Hyer, M. W.

2004-01-01

In this study, a progressive failure analysis is used to investigate leakage in internally pressurized non-circular composite cylinders. This type of approach accounts for the localized loss of stiffness when material failure occurs at some location in a structure by degrading the local material elastic properties by a certain factor. The manner in which this degradation of material properties takes place depends on the failure modes, which are determined by the application of a failure criterion. The finite-element code STAGS, which has the capability to perform progressive failure analysis using different degradation schemes and failure criteria, is utilized to analyze laboratory scale, graphite-epoxy, elliptical cylinders with quasi-isotropic, circumferentially-stiff, and axially-stiff material orthotropies. The results are divided into two parts. The first part shows that leakage, which is assumed to develop if there is material failure in every layer at some axial and circumferential location within the cylinder, does not occur without failure of fibers. Moreover before fibers begin to fail, only matrix tensile failures, or matrix cracking, takes place, and at least one layer in all three cylinders studied remain uncracked, preventing the formation of a leakage path. That determination is corroborated by the use of different degradation schemes and various failure criteria. Among the degradation schemes investigated are the degradation of different engineering properties, the use of various degradation factors, the recursive or non-recursive degradation of the engineering properties, and the degradation of material properties using different computational approaches. The failure criteria used in the analysis include the noninteractive maximum stress criterion and the interactive Hashin and Tsai-Wu criteria. The second part of the results shows that leakage occurs due to a combination of matrix tensile and compressive, fiber tensile and compressive, and inplane shear failure modes in all three cylinders. Leakage develops after a relatively low amount of fiber damage, at about the same pressure for three material orthotropies, and at approximately the same location.

A Multiscale Progressive Failure Modeling Methodology for Composites that Includes Fiber Strength Stochastics

NASA Technical Reports Server (NTRS)

Ricks, Trenton M.; Lacy, Thomas E., Jr.; Bednarcyk, Brett A.; Arnold, Steven M.; Hutchins, John W.

2014-01-01

A multiscale modeling methodology was developed for continuous fiber composites that incorporates a statistical distribution of fiber strengths into coupled multiscale micromechanics/finite element (FE) analyses. A modified two-parameter Weibull cumulative distribution function, which accounts for the effect of fiber length on the probability of failure, was used to characterize the statistical distribution of fiber strengths. A parametric study using the NASA Micromechanics Analysis Code with the Generalized Method of Cells (MAC/GMC) was performed to assess the effect of variable fiber strengths on local composite failure within a repeating unit cell (RUC) and subsequent global failure. The NASA code FEAMAC and the ABAQUS finite element solver were used to analyze the progressive failure of a unidirectional SCS-6/TIMETAL 21S metal matrix composite tensile dogbone specimen at 650 degC. Multiscale progressive failure analyses were performed to quantify the effect of spatially varying fiber strengths on the RUC-averaged and global stress-strain responses and failure. The ultimate composite strengths and distribution of failure locations (predominately within the gage section) reasonably matched the experimentally observed failure behavior. The predicted composite failure behavior suggests that use of macroscale models that exploit global geometric symmetries are inappropriate for cases where the actual distribution of local fiber strengths displays no such symmetries. This issue has not received much attention in the literature. Moreover, the model discretization at a specific length scale can have a profound effect on the computational costs associated with multiscale simulations.models that yield accurate yet tractable results.

Progressive fracture of fiber composites

NASA Technical Reports Server (NTRS)

Irvin, T. B.; Ginty, C. A.

1983-01-01

Refined models and procedures are described for determining progressive composite fracture in graphite/epoxy angleplied laminates. Lewis Research Center capabilities are utilized including the Real Time Ultrasonic C Scan (RUSCAN) experimental facility and the Composite Durability Structural Analysis (CODSTRAN) computer code. The CODSTRAN computer code is used to predict the fracture progression based on composite mechanics, finite element stress analysis, and fracture criteria modules. The RUSCAN facility, CODSTRAN computer code, and scanning electron microscope are used to determine durability and identify failure mechanisms in graphite/epoxy composites.

The Effect of Fiber Strength Stochastics and Local Fiber Volume Fraction on Multiscale Progressive Failure of Composites

NASA Technical Reports Server (NTRS)

Ricks, Trenton M.; Lacy, Jr., Thomas E.; Bednarcyk, Brett A.; Arnold, Steven M.

2013-01-01

Continuous fiber unidirectional polymer matrix composites (PMCs) can exhibit significant local variations in fiber volume fraction as a result of processing conditions that can lead to further local differences in material properties and failure behavior. In this work, the coupled effects of both local variations in fiber volume fraction and the empirically-based statistical distribution of fiber strengths on the predicted longitudinal modulus and local tensile strength of a unidirectional AS4 carbon fiber/ Hercules 3502 epoxy composite were investigated using the special purpose NASA Micromechanics Analysis Code with Generalized Method of Cells (MAC/GMC); local effective composite properties were obtained by homogenizing the material behavior over repeating units cells (RUCs). The predicted effective longitudinal modulus was relatively insensitive to small (8%) variations in local fiber volume fraction. The composite tensile strength, however, was highly dependent on the local distribution in fiber strengths. The RUC-averaged constitutive response can be used to characterize lower length scale material behavior within a multiscale analysis framework that couples the NASA code FEAMAC and the ABAQUS finite element solver. Such an approach can be effectively used to analyze the progressive failure of PMC structures whose failure initiates at the RUC level. Consideration of the effect of local variations in constituent properties and morphologies on progressive failure of PMCs is a central aspect of the application of Integrated Computational Materials Engineering (ICME) principles for composite materials.

[Progressive damage monitoring of corrugated composite skins by the FBG spectral characteristics].

PubMed

Zhang, Yong; Wang, Bang-Feng; Lu, Ji-Yun; Gu, Li-Li; Su, Yong-Gang

2014-03-01

In the present paper, a method of monitoring progressive damage of composite structures by non-uniform fiber Bragg grating (FBG) reflection spectrum is proposed. Due to the finite element analysis of corrugated composite skins specimens, the failure process under tensile load and corresponding critical failure loads of corrugated composite skin was predicated. Then, the non-uniform reflection spectrum of FBG sensor could be reconstructed and the corresponding relationship between layer failure order sequence of corrugated composite skin and FBG sensor reflection spectrums was acquired. A monitoring system based on FBG non-uniform reflection spectrum, which can be used to monitor progressive damage of corrugated composite skins, was built. The corrugated composite skins were stretched under this FBG non-uniform reflection spectrum monitoring system. The results indicate that real-time spectrums acquired by FBG non-uniform reflection spectrum monitoring system show the same trend with the reconstruction reflection spectrums. The maximum error between the corresponding failure and the predictive value is 8.6%, which proves the feasibility of using FBG sensor to monitor progressive damage of corrugated composite skin. In this method, the real-time changes in the FBG non-uniform reflection spectrum within the scope of failure were acquired through the way of monitoring and predicating, and at the same time, the progressive damage extent and layer failure sequence of corru- gated composite skin was estimated, and without destroying the structure of the specimen, the method is easy and simple to operate. The measurement and transmission section of the system are completely composed of optical fiber, which provides new ideas and experimental reference for the field of dynamic monitoring of smart skin.

A mechanics framework for a progressive failure methodology for laminated composites

NASA Technical Reports Server (NTRS)

Harris, Charles E.; Allen, David H.; Lo, David C.

1989-01-01

A laminate strength and life prediction methodology has been postulated for laminated composites which accounts for the progressive development of microstructural damage to structural failure. A damage dependent constitutive model predicts the stress redistribution in an average sense that accompanies damage development in laminates. Each mode of microstructural damage is represented by a second-order tensor valued internal state variable which is a strain like quantity. The mechanics framework together with the global-local strategy for predicting laminate strength and life is presented in the paper. The kinematic effects of damage are represented by effective engineering moduli in the global analysis and the results of the global analysis provide the boundary conditions for the local ply level stress analysis. Damage evolution laws are based on experimental results.

Response of resin transfer molded (RTM) composites under reversed cyclic loading

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mahfuz, H.; Haque, A.; Yu, D.

1996-01-01

Compressive behavior and the tension-compression fatigue response of resin transfer molded IM7 PW/PR 500 composite laminate with a circular notch have been studied. Fatigue damage characteristics have been investigated through the changes in the laminate strength and stiffness by gradually incrementing the fatigue cycles at a preselected load level. Progressive damage in the surface of the laminate during fatigue has been investigated using cellulose replicas. Failure mechanisms during static and cyclic tests have been identified and presented in detail. Extensive debonding of filaments and complete fiber bundle fracture accompanied by delamination were found to be responsible for fatigue failures, whilemore » fiber buckling, partial fiber fracture and delamination were characterized as the failure modes during static tests. Weibull analysis of the static, cyclic and residual tests have been performed and described in detail. Fractured as well as untested specimens were C-scanned, and the progressive damage growth during fatigue is presented. Optical Microscopy (OM) and Scanning Electron Microscopy (SEM) for the fractured specimen were also performed and the analysis of the failure behavior is presented.« less

Progressive failure of sheeted rock slopes: the 2009–2010 Rhombus Wall rock falls in Yosemite Valley, California, USA

USGS Publications Warehouse

Stock, Greg M.; Martel, Stephen J.; Collins, Brian D.; Harp, Edwin L.

2012-01-01

Progressive rock-fall failures in natural rock slopes are common in many environments, but often elude detailed quantitative documentation and analysis. Here we present high-resolution photography, video, and laser scanning data that document spatial and temporal patterns of a 15-month-long sequence of at least 14 rock falls from the Rhombus Wall, a sheeted granitic cliff in Yosemite Valley, California. The rock-fall sequence began on 26 August 2009 with a small failure at the tip of an overhanging rock slab. Several hours later, a series of five rock falls totaling 736 m3progressed upward along a sheeting joint behind the overhanging slab. Over the next 3 weeks, audible cracking occurred on the Rhombus Wall, suggesting crack propagation, while visual monitoring revealed opening of a sheeting joint adjacent to the previous failure surface. On 14 September 2009 a 110 m3 slab detached along this sheeting joint. Additional rock falls between 30 August and 20 November 2010, totaling 187 m3, radiated outward from the initial failure area along cliff (sub)parallel sheeting joints. We suggest that these progressive failures might have been related to stress redistributions accompanying propagation of sheeting joints behind the cliff face. Mechanical analyses indicate that tensile stresses should occur perpendicular to the cliff face and open sheeting joints, and that sheeting joints should propagate parallel to a cliff face from areas of stress concentrations. The analyses also account for how sheeting joints can propagate to lengths many times greater than their depths behind cliff faces. We posit that as a region of failure spreads across a cliff face, stress concentrations along its margin will spread with it, promoting further crack propagation and rock falls.

The clinical course of diabetic nephropathy.

PubMed

Kussman, M J; Goldstein, H; Gleason, R E

1976-10-18

A retrospective record analysis of 112 juvenile-onset diabetics with nephropathy was conducted in order to determine their clinical course. The mean duration of diabetes at the onset of proteinuria was 17.3+/-6.0 years. Early renal failure appeared two years after the onset of protein-uria, and severe renal failure (mean serum creatinine level, 8.5+/-3.9 mg/100 ml) four years after the onset of proteinuria. The mean duration of life after the onset of severe renal failure was six months. The mortality was 53%, with 59% of the deaths attributable to renal failure and 36% to cardiovascular disease. All patients experienced progressive deterioration of renal function as well as the other complications of diabetes, the rate of progression being accelerated toward the end of the course. Juvenile onset diabetics should be considered for renal transplantation before the serum creatinine level reaches 8.5 mg/100 ml.

Alteration of the Intestinal Environment by Lubiprostone Is Associated with Amelioration of Adenine-Induced CKD

PubMed Central

Mishima, Eikan; Fukuda, Shinji; Shima, Hisato; Hirayama, Akiyoshi; Akiyama, Yasutoshi; Takeuchi, Yoichi; Fukuda, Noriko N.; Suzuki, Takehiro; Suzuki, Chitose; Yuri, Akinori; Kikuchi, Koichi; Tomioka, Yoshihisa; Ito, Sadayoshi; Soga, Tomoyoshi

2015-01-01

The accumulation of uremic toxins is involved in the progression of CKD. Various uremic toxins are derived from gut microbiota, and an imbalance of gut microbiota or dysbiosis is related to renal failure. However, the pathophysiologic mechanisms underlying the relationship between the gut microbiota and renal failure are still obscure. Using an adenine-induced renal failure mouse model, we evaluated the effects of the ClC-2 chloride channel activator lubiprostone (commonly used for the treatment of constipation) on CKD. Oral administration of lubiprostone (500 µg/kg per day) changed the fecal and intestinal properties in mice with renal failure. Additionally, lubiprostone treatment reduced the elevated BUN and protected against tubulointerstitial damage, renal fibrosis, and inflammation. Gut microbiome analysis of 16S rRNA genes in the renal failure mice showed that lubiprostone treatment altered their microbial composition, especially the recovery of the levels of the Lactobacillaceae family and Prevotella genus, which were significantly reduced in the renal failure mice. Furthermore, capillary electrophoresis–mass spectrometry-based metabolome analysis showed that lubiprostone treatment decreased the plasma level of uremic toxins, such as indoxyl sulfate and hippurate, which are derived from gut microbiota, and a more recently discovered uremic toxin, trans-aconitate. These results suggest that lubiprostone ameliorates the progression of CKD and the accumulation of uremic toxins by improving the gut microbiota and intestinal environment. PMID:25525179

Shielding of the Hip Prosthesis During Radiation Therapy for Heterotopic Ossification is Associated with Increased Failure of Prophylaxis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balboni, Tracy A.; Gaccione, Peter; Gobezie, Reuben

2007-04-01

Purpose: Radiation therapy (RT) is frequently administered to prevent heterotopic ossification (HO) after total hip arthroplasty (THA). The purpose of this study was to determine if there is an increased risk of HO after RT prophylaxis with shielding of the THA components. Methods and Materials: This is a retrospective analysis of THA patients undergoing RT prophylaxis of HO at Brigham and Women's Hospital between June 1994 and February 2004. Univariate and multivariate logistic regressions were used to assess the relationships of all variables to failure of RT prophylaxis. Results: A total of 137 patients were identified and 84 were eligiblemore » for analysis (61%). The median RT dose was 750 cGy in one fraction, and the median follow-up was 24 months. Eight of 40 unshielded patients (20%) developed any progression of HO compared with 21 of 44 shielded patients (48%) (p = 0.009). Brooker Grade III-IV HO developed in 5% of unshielded and 18% of shielded patients (p 0.08). Multivariate analysis revealed shielding (p = 0.02) and THA for prosthesis infection (p = 0.03) to be significant predictors of RT failure, with a trend toward an increasing risk of HO progression with age (p = 0.07). There was no significant difference in the prosthesis failure rates between shielded and unshielded patients. Conclusions: A significantly increased risk of failure of RT prophylaxis for HO was noted in those receiving shielding of the hip prosthesis. Shielding did not appear to reduce the risk of prosthesis failure.« less

Impact analysis of composite aircraft structures

NASA Technical Reports Server (NTRS)

Pifko, Allan B.; Kushner, Alan S.

1993-01-01

The impact analysis of composite aircraft structures is discussed. Topics discussed include: background remarks on aircraft crashworthiness; comments on modeling strategies for crashworthiness simulation; initial study of simulation of progressive failure of an aircraft component constructed of composite material; and research direction in composite characterization for impact analysis.

Progressive Damage Analysis of Bonded Composite Joints

NASA Technical Reports Server (NTRS)

Leone, Frank A., Jr.; Girolamo, Donato; Davila, Carlos G.

2012-01-01

The present work is related to the development and application of progressive damage modeling techniques to bonded joint technology. The joint designs studied in this work include a conventional composite splice joint and a NASA-patented durable redundant joint. Both designs involve honeycomb sandwich structures with carbon/epoxy facesheets joined using adhesively bonded doublers.Progressive damage modeling allows for the prediction of the initiation and evolution of damage within a structure. For structures that include multiple material systems, such as the joint designs under consideration, the number of potential failure mechanisms that must be accounted for drastically increases the complexity of the analyses. Potential failure mechanisms include fiber fracture, intraply matrix cracking, delamination, core crushing, adhesive failure, and their interactions. The bonded joints were modeled using highly parametric, explicitly solved finite element models, with damage modeling implemented via custom user-written subroutines. Each ply was discretely meshed using three-dimensional solid elements. Layers of cohesive elements were included between each ply to account for the possibility of delaminations and were used to model the adhesive layers forming the joint. Good correlation with experimental results was achieved both in terms of load-displacement history and the predicted failure mechanism(s).

High frequency of brain metastases after adjuvant therapy for high-risk melanoma.

PubMed

Samlowski, Wolfram E; Moon, James; Witter, Merle; Atkins, Michael B; Kirkwood, John M; Othus, Megan; Ribas, Antoni; Sondak, Vernon K; Flaherty, Lawrence E

2017-11-01

The incidence of CNS progression in patients with high-risk regional melanoma (stages IIIAN2a-IIIC) is not well characterized. Data from the S0008 trial provided an opportunity to examine the role of CNS progression in treatment failure and survival. All patients were surgically staged. Following wide excision and full regional lymphadenectomy, patients were randomized to receive adjuvant biochemotherapy (BCT) or high-dose interferon alfa-2B (HDI). CNS progression was retrospectively identified from data forms. Survival was measured from date of CNS progression. A total of 402 eligible patients were included in the analysis (BCT: 199, HDI: 203). Median follow-up (if alive) was over 7 years (range: 1 month to 11 years). The site of initial progression was identifiable in 80% of relapsing patients. CNS progression was a component of systemic melanoma relapse in 59/402 patients (15% overall). In 34/402 patients (9%) CNS progression represented the initial site of treatment failure. CNS progression was a component of initial progression in 27% of all patients whose melanoma relapsed (59/221). The risk of CNS progression was highest within 3 years of randomization. The difference in CNS progression rates between treatment arms was not significant (BCT = 25, HDI = 34, P = 0.24). Lymph node macrometastases strongly associated with CNS progression (P = 0.001), while ulceration and head and neck primaries were not significant predictors. This retrospective analysis of the S0008 trial identified a high brain metastasis rate (15%) in regionally advanced melanoma patients. Further studies are needed to establish whether screening plus earlier treatment would improve survival following CNS progression. © 2017 The Authors. Cancer Medicine published by John Wiley & Sons Ltd.

Failure mode analysis of silicon-based intracortical microelectrode arrays in non-human primates

PubMed Central

Barrese, James C; Rao, Naveen; Paroo, Kaivon; Triebwasser, Corey; Vargas-Irwin, Carlos; Franquemont, Lachlan; Donoghue, John P

2016-01-01

Objective Brain–computer interfaces (BCIs) using chronically implanted intracortical microelectrode arrays (MEAs) have the potential to restore lost function to people with disabilities if they work reliably for years. Current sensors fail to provide reliably useful signals over extended periods of time for reasons that are not clear. This study reports a comprehensive retrospective analysis from a large set of implants of a single type of intracortical MEA in a single species, with a common set of measures in order to evaluate failure modes. Approach Since 1996, 78 silicon MEAs were implanted in 27 monkeys (Macaca mulatta). We used two approaches to find reasons for sensor failure. First, we classified the time course leading up to complete recording failure as acute (abrupt) or chronic (progressive). Second, we evaluated the quality of electrode recordings over time based on signal features and electrode impedance. Failure modes were divided into four categories: biological, material, mechanical, and unknown. Main results Recording duration ranged from 0 to 2104 days (5.75 years), with a mean of 387 days and a median of 182 days (n = 78). Sixty-two arrays failed completely with a mean time to failure of 332 days (median = 133 days) while nine array experiments were electively terminated for experimental reasons (mean = 486 days). Seven remained active at the close of this study (mean = 753 days). Most failures (56%) occurred within a year of implantation, with acute mechanical failures the most common class (48%), largely because of connector issues (83%). Among grossly observable biological failures (24%), a progressive meningeal reaction that separated the array from the parenchyma was most prevalent (14.5%). In the absence of acute interruptions, electrode recordings showed a slow progressive decline in spike amplitude, noise amplitude, and number of viable channels that predicts complete signal loss by about eight years. Impedance measurements showed systematic early increases, which did not appear to affect recording quality, followed by a slow decline over years. The combination of slowly falling impedance and signal quality in these arrays indicate that insulating material failure is the most significant factor. Significance This is the first long-term failure mode analysis of an emerging BCI technology in a large series of non-human primates. The classification system introduced here may be used to standardize how neuroprosthetic failure modes are evaluated. The results demonstrate the potential for these arrays to record for many years, but achieving reliable sensors will require replacing connectors with implantable wireless systems, controlling the meningeal reaction, and improving insulation materials. These results will focus future research in order to create clinical neuroprosthetic sensors, as well as valuable research tools, that are able to safely provide reliable neural signals for over a decade. PMID:24216311

Failure mode analysis of silicon-based intracortical microelectrode arrays in non-human primates

NASA Astrophysics Data System (ADS)

Barrese, James C.; Rao, Naveen; Paroo, Kaivon; Triebwasser, Corey; Vargas-Irwin, Carlos; Franquemont, Lachlan; Donoghue, John P.

2013-12-01

Objective. Brain-computer interfaces (BCIs) using chronically implanted intracortical microelectrode arrays (MEAs) have the potential to restore lost function to people with disabilities if they work reliably for years. Current sensors fail to provide reliably useful signals over extended periods of time for reasons that are not clear. This study reports a comprehensive retrospective analysis from a large set of implants of a single type of intracortical MEA in a single species, with a common set of measures in order to evaluate failure modes. Approach. Since 1996, 78 silicon MEAs were implanted in 27 monkeys (Macaca mulatta). We used two approaches to find reasons for sensor failure. First, we classified the time course leading up to complete recording failure as acute (abrupt) or chronic (progressive). Second, we evaluated the quality of electrode recordings over time based on signal features and electrode impedance. Failure modes were divided into four categories: biological, material, mechanical, and unknown. Main results. Recording duration ranged from 0 to 2104 days (5.75 years), with a mean of 387 days and a median of 182 days (n = 78). Sixty-two arrays failed completely with a mean time to failure of 332 days (median = 133 days) while nine array experiments were electively terminated for experimental reasons (mean = 486 days). Seven remained active at the close of this study (mean = 753 days). Most failures (56%) occurred within a year of implantation, with acute mechanical failures the most common class (48%), largely because of connector issues (83%). Among grossly observable biological failures (24%), a progressive meningeal reaction that separated the array from the parenchyma was most prevalent (14.5%). In the absence of acute interruptions, electrode recordings showed a slow progressive decline in spike amplitude, noise amplitude, and number of viable channels that predicts complete signal loss by about eight years. Impedance measurements showed systematic early increases, which did not appear to affect recording quality, followed by a slow decline over years. The combination of slowly falling impedance and signal quality in these arrays indicates that insulating material failure is the most significant factor. Significance. This is the first long-term failure mode analysis of an emerging BCI technology in a large series of non-human primates. The classification system introduced here may be used to standardize how neuroprosthetic failure modes are evaluated. The results demonstrate the potential for these arrays to record for many years, but achieving reliable sensors will require replacing connectors with implantable wireless systems, controlling the meningeal reaction, and improving insulation materials. These results will focus future research in order to create clinical neuroprosthetic sensors, as well as valuable research tools, that are able to safely provide reliable neural signals for over a decade.

[Membranous glomerulonephritis. Experience at the Instituto Nacional de la Nutrición Salvador Zubirán].

PubMed

Correa-Rotter, R; Gamba, G; Ochoa, C; Onuma, L; Reyes, E; Tamayo, J A; Peña, J C

1990-01-01

The purpose of this retrospective study was to study the incidence of idiopathic and secondary forms of membranous nephropathy in our institution, its clinical course and progression to chronic renal failure, and the risk factors associated with it. Two hundred fourteen (16%) of the 1,287 renal biopsies obtained between 1962 and 1988 were primary glomerular diseases and 28 of this 214 (13%) were idiopathic membranous nephropathy. On the other hand 59 of 1,287 biopsies were membranous nephropathy of whom 28 were idiopathic, 27 secondary to systemic lupus erythematosus, 2 due to drugs, one associated with rheumatoid arthritis, and one more with breast cancer. The clinical picture was: nephrotic syndrome in 84%, hypertension in 15%, non-nephrotic proteinuria in 14%, chronic renal failure in 8.4%, and renal vein thrombosis in 6.3%. In the idiopathic group 75% of the patients were male while in the lupus group 85% were female. For the analysis of progression to chronic renal failure we excluded 5 patients with renal failure when the biopsy was taken, 2 because the nephropathy was due to drugs, one associated with breast cancer, and nine were within the first year of follow-up. Thus, for this analysis the group consisted of 22 patients with idiopathic form and 20 with systemic lupus erythematosus. The idiopathic and lupus groups were similar except for a lower serum albumin in the former. The progression to renal failure was seen in 9 patients: six in the idiopathic group and the other 3 in the lupus group; this difference was not significant.(ABSTRACT TRUNCATED AT 250 WORDS)

Time-Dependent Stress Rupture Strength Degradation of Hi-Nicalon Fiber-Reinforced Silicon Carbide Composites at Intermediate Temperatures

NASA Technical Reports Server (NTRS)

Sullivan, Roy M.

2016-01-01

The stress rupture strength of silicon carbide fiber-reinforced silicon carbide composites with a boron nitride fiber coating decreases with time within the intermediate temperature range of 700 to 950 degree Celsius. Various theories have been proposed to explain the cause of the time-dependent stress rupture strength. The objective of this paper is to investigate the relative significance of the various theories for the time-dependent strength of silicon carbide fiber-reinforced silicon carbide composites. This is achieved through the development of a numerically based progressive failure analysis routine and through the application of the routine to simulate the composite stress rupture tests. The progressive failure routine is a time-marching routine with an iterative loop between a probability of fiber survival equation and a force equilibrium equation within each time step. Failure of the composite is assumed to initiate near a matrix crack and the progression of fiber failures occurs by global load sharing. The probability of survival equation is derived from consideration of the strength of ceramic fibers with randomly occurring and slow growing flaws as well as the mechanical interaction between the fibers and matrix near a matrix crack. The force equilibrium equation follows from the global load sharing presumption. The results of progressive failure analyses of the composite tests suggest that the relationship between time and stress-rupture strength is attributed almost entirely to the slow flaw growth within the fibers. Although other mechanisms may be present, they appear to have only a minor influence on the observed time-dependent behavior.

Galectin-3: a new biomarker for the diagnosis, analysis and prognosis of acute and chronic heart failure.

PubMed

Hrynchyshyn, Nataliya; Jourdain, Patrick; Desnos, Michel; Diebold, Benoit; Funck, François

2013-10-01

Heart failure constitutes an important medical, social and economic problem. The prevalence of heart failure is estimated as 2-3% of the adult population and increases with age, despite the scientific progress of the past decade, especially the emergence of natriuretic peptides, which have been widely used as reliable markers for diagnostic and prognostic evaluation. Identification of new reliable markers for diagnosis, analysis, prognosis of mortality and prevention of hospitalization is still necessary. Galectin-3 is a soluble β-galactoside-binding protein secreted by activated macrophages. Its main action is to bind to and activate the fibroblasts that form collagen and scar tissue, leading to progressive cardiac fibrosis. Numerous experimental studies have shown the important role of galectin-3 in cardiac remodelling due to fibrosis, independent of the fibrosis aetiology. Galectin-3 is significantly increased in chronic heart failure (acute or non-acute onset), independent of aetiology. Some clinical studies have confirmed the predictive value of galectin-3 in all-cause mortality in patients with heart failure. In our review, we aim to analyse the role of galectin-3 in the development of heart failure, its value in screening and clinical decision making and its possible predictive application in follow-up as a "routine" test in an addition to established biomarkers, such as B-type natriuretic peptide and N-terminal prohormone of B-type natriuretic peptide. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Alteration of the Intestinal Environment by Lubiprostone Is Associated with Amelioration of Adenine-Induced CKD.

PubMed

Mishima, Eikan; Fukuda, Shinji; Shima, Hisato; Hirayama, Akiyoshi; Akiyama, Yasutoshi; Takeuchi, Yoichi; Fukuda, Noriko N; Suzuki, Takehiro; Suzuki, Chitose; Yuri, Akinori; Kikuchi, Koichi; Tomioka, Yoshihisa; Ito, Sadayoshi; Soga, Tomoyoshi; Abe, Takaaki

2015-08-01

The accumulation of uremic toxins is involved in the progression of CKD. Various uremic toxins are derived from gut microbiota, and an imbalance of gut microbiota or dysbiosis is related to renal failure. However, the pathophysiologic mechanisms underlying the relationship between the gut microbiota and renal failure are still obscure. Using an adenine-induced renal failure mouse model, we evaluated the effects of the ClC-2 chloride channel activator lubiprostone (commonly used for the treatment of constipation) on CKD. Oral administration of lubiprostone (500 µg/kg per day) changed the fecal and intestinal properties in mice with renal failure. Additionally, lubiprostone treatment reduced the elevated BUN and protected against tubulointerstitial damage, renal fibrosis, and inflammation. Gut microbiome analysis of 16S rRNA genes in the renal failure mice showed that lubiprostone treatment altered their microbial composition, especially the recovery of the levels of the Lactobacillaceae family and Prevotella genus, which were significantly reduced in the renal failure mice. Furthermore, capillary electrophoresis-mass spectrometry-based metabolome analysis showed that lubiprostone treatment decreased the plasma level of uremic toxins, such as indoxyl sulfate and hippurate, which are derived from gut microbiota, and a more recently discovered uremic toxin, trans-aconitate. These results suggest that lubiprostone ameliorates the progression of CKD and the accumulation of uremic toxins by improving the gut microbiota and intestinal environment. Copyright © 2015 by the American Society of Nephrology.

A Selection of Composites Simulation Practices at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Ratcliffe, James G.

2007-01-01

One of the major areas of study at NASA Langley Research Center is the development of technologies that support the use of advanced composite materials in aerospace applications. Amongst the supporting technologies are analysis tools used to simulate the behavior of these materials. This presentation will discuss a number of examples of analysis tools and simulation practices conducted at NASA Langley. The presentation will include examples of damage tolerance analyses for both interlaminar and intralaminar failure modes. Tools for modeling interlaminar failure modes include fracture mechanics and cohesive methods, whilst tools for modeling intralaminar failure involve the development of various progressive failure analyses. Other examples of analyses developed at NASA Langley include a thermo-mechanical model of an orthotropic material and the simulation of delamination growth in z-pin reinforced laminates.

Use of Modal Acoustic Emission to Monitor Damage Progression in Carbon Fiber/Epoxy Tows and Implications for Composite Structures

NASA Technical Reports Server (NTRS)

Waller, Jess M.; Saulsberry, Regor L.; Nichols, Charles T.; Wentzel, Daniel J.

2010-01-01

This slide presentation reviews the use of Modal Acoustic Emission to monitor damage progression to carbon fiber/epoxy tows. There is a risk for catastrophic failure of composite overwrapped pressure vessels (COPVs) due to burst-before-leak (BBL) stress rupture (SR) failure of carbon-epoxy (C/Ep) COPVs. A lack of quantitative nondestructive evaluation (NDE) is causing problems in current and future spacecraft designs. It is therefore important to develop and demonstrate critical NDE that can be implemented during stages of the design process since the observed rupture can occur with little of no advanced warning. Therefore a program was required to develop quantitative acoustic emission (AE) procedures specific to C/Ep overwraps, but which also have utility for monitoring damage accumulation in composite structure in general, and to lay the groundwork for establishing critical thresholds for accumulated damage in composite structures, such as COPVs, so that precautionary or preemptive engineering steps can be implemented to minimize of obviate the risk of catastrophic failure. A computed Felicity Ratio (FR) coupled with fast Fourier Transform (FFT) frequency analysis shows promise as an analytical pass/fail criterion. The FR analysis and waveform and FFT analysis are reviewed

Prediction of Composite Laminate Strength Properties Using a Refined Zigzag Plate Element

NASA Technical Reports Server (NTRS)

Barut, Atila; Madenci, Erdogan; Tessler, Alexander

2013-01-01

This study presents an approach that uses the refined zigzag element, RZE(exp2,2) in conjunction with progressive failure criteria to predict the ultimate strength of composite laminates based on only ply-level strength properties. The methodology involves four major steps: (1) Determination of accurate stress and strain fields under complex loading conditions using RZE(exp2,2)-based finite element analysis, (2) Determination of failure locations and failure modes using the commonly accepted Hashin's failure criteria, (3) Recursive degradation of the material stiffness, and (4) Non-linear incremental finite element analysis to obtain stress redistribution until global failure. The validity of this approach is established by considering the published test data and predictions for (1) strength of laminates under various off-axis loading, (2) strength of laminates with a hole under compression, and (3) strength of laminates with a hole under tension.

Reinforcement of composite laminate free edges with U-shaped caps

NASA Technical Reports Server (NTRS)

Howard, W. E.; Gossard, T., Jr.; Jones, R. M.

1986-01-01

Generalized plane strain finite element analysis is used to predict reduction of interlaminar normal stresses when a U-shaped cap is bonded to the edge of a laminate. Three-dimensional composite material failure criteria are used in a progressive laminate failure analysis to predict failure loads of laminates with different edge cap designs. In an experimental program, symmetric 11-layer graphite-epoxy laminates with a one-layer cap of Kevlar-epoxy cloth are shown to be 130 to 140 percent stronger than uncapped laminates under static tensile and tension-tension fatigue loading. In addition, the coefficient of variation of the static tensile failure load decreases from 24 to 8 percent when edge caps are added. The predicted failure load calculated with the finite element results is 10 percent lower than the actual failure load. For both capped and uncapped laminates, actual failure loads are much lower than those predicted using classical lamination theory stresses and a two-dimensional failure criterion. Possible applications of the free edge reinforcement concept are described, and future research is suggested.

The Effects of Progressive Taxation on Labor Supply when Hours and Wages Are Jointly Determined

ERIC Educational Resources Information Center

Aaronson, Daniel; French, Eric

2009-01-01

This paper extends a standard intertemporal labor supply model to account for progressive taxation as well as the joint determination of hourly wages and hours worked. We show that these two factors can have implications for both estimating labor supply elasticities as well as for using these elasticities in tax analysis. Failure to account for…

Acoustic emission and nondestructive evaluation of biomaterials and tissues.

PubMed

Kohn, D H

1995-01-01

Acoustic emission (AE) is an acoustic wave generated by the release of energy from localized sources in a material subjected to an externally applied stimulus. This technique may be used nondestructively to analyze tissues, materials, and biomaterial/tissue interfaces. Applications of AE include use as an early warning tool for detecting tissue and material defects and incipient failure, monitoring damage progression, predicting failure, characterizing failure mechanisms, and serving as a tool to aid in understanding material properties and structure-function relations. All these applications may be performed in real time. This review discusses general principles of AE monitoring and the use of the technique in 3 areas of importance to biomedical engineering: (1) analysis of biomaterials, (2) analysis of tissues, and (3) analysis of tissue/biomaterial interfaces. Focus in these areas is on detection sensitivity, methods of signal analysis in both the time and frequency domains, the relationship between acoustic signals and microstructural phenomena, and the uses of the technique in establishing a relationship between signals and failure mechanisms.

Efficacy of concurrent treatments in idiopathic pulmonary fibrosis patients with a rapid progression of respiratory failure: an analysis of a national administrative database in Japan.

PubMed

Oda, Keishi; Yatera, Kazuhiro; Fujino, Yoshihisa; Ishimoto, Hiroshi; Nakao, Hiroyuki; Hanaka, Tetsuya; Ogoshi, Takaaki; Kido, Takashi; Fushimi, Kiyohide; Matsuda, Shinya; Mukae, Hiroshi

2016-06-08

Some IPF patients show a rapid progression of respiratory failure. Most patients are treated with high-dose corticosteroids. However, no large clinical studies have investigated the prognosis or efficacy of combined treatments including high-dose corticosteroids in IPF patients with a rapid progression of respiratory failure. We enrolled IPF patients who received mechanical ventilation and high-dose corticosteroids between April 2010 and March 2013. Records were extracted from a Japanese nationwide inpatient database. We conducted a retrospective epidemiologic and prognostic analysis. Two hundred nine patients receiving an average of 12.8 days of ventilatory support were enrolled. There were 138 (66 %) fatal cases; the median survival was 21 days. The short-term (within 30 days) and long-term (within 90 days) survival rates were 44.6 and 24.6 %, respectively. The average monthly admission rate among the IPF patients with the rapid progression of respiratory failure in the winter was significantly higher than that in spring (p = 0.018). Survival did not differ to a statistically significant extent in the different geographic areas of Japan. Survivors were significantly younger (p = 0.002) with higher rates of mild dyspnea on admission (p = 0.012), they more frequently underwent bronchoscopy (p < 0.001), and received anticoagulants (p = 0.027), co-trimoxazole (p < 0.001) and macrolide (p = 0.02) more frequently than non-survivors. A multivariate logistic analysis demonstrated that two factors were significantly associated with a poor prognosis: >80 years of age (OR = 2.94, 95 % Cl 1.044-8.303; p = 0.041) and the intravenous administration of high-dose cyclophosphamide (OR = 3.17, 95 % Cl 1.101-9.148; p = 0.033). Undergoing bronchoscopy during intubation (OR = 0.25, 95 % Cl 0.079-0.798; p = 0.019) and the administration of co-trimoxazole (OR = 0.28, 95 % Cl 0.132-0.607; p = 0.001) and macrolides (OR = 0.37, 95 % Cl 0.155-0.867; p = 0.033) were significantly associated with a good prognosis. The dosage of co-trimoxazole significantly correlated with survival. Co-trimoxazole and macrolides may be a good addition to high-dose corticosteroids in the treatment of IPF patients with a rapid progression of respiratory failure.

A Novel Multiscale Physics Based Progressive Failure Methodology for Laminated Composite Structures

NASA Technical Reports Server (NTRS)

Pineda, Evan J.; Waas, Anthony M.; Bednarcyk, Brett A.; Collier, Craig S.; Yarrington, Phillip W.

2008-01-01

A variable fidelity, multiscale, physics based finite element procedure for predicting progressive damage and failure of laminated continuous fiber reinforced composites is introduced. At every integration point in a finite element model, progressive damage is accounted for at the lamina-level using thermodynamically based Schapery Theory. Separate failure criteria are applied at either the global-scale or the microscale in two different FEM models. A micromechanics model, the Generalized Method of Cells, is used to evaluate failure criteria at the micro-level. The stress-strain behavior and observed failure mechanisms are compared with experimental results for both models.

Fatigue behavior of a cross-ply ceramic matrix composite subjected to tension-tension cycling with hold time. Master`s thesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grant, S.A.

This study was carried out to investigate the elevated temperature behavior of the SiC-MAS5 cross- ply (O/9O)4S ceramic matrix composite manufactured by Corning Inc. to fatigue with loading waveforms that combine the characteristics of stress rupture and high cycle fatigue. The test results were compiled in the form of S-N (cycles to failure), S-T (exposure time versus cycles to failure), S-S (energy exposure versus cycles to failure), normalized modulus degradation, strain progression, and hysteresis loop progression. From the mechanical behavior demonstrated by these curves, relationships between the effect of the environment and loading waveform were developed. In addition, a post-mortemmore » SEM analysis of the fracture surface was conducted and the results compared to the mechanical behavior.« less

Association between First Nations ethnicity and progression to kidney failure by presence and severity of albuminuria.

PubMed

Samuel, Susan M; Palacios-Derflingher, Luz; Tonelli, Marcello; Manns, Braden; Crowshoe, Lynden; Ahmed, Sofia B; Jun, Min; Saad, Nathalie; Hemmelgarn, Brenda R

2014-02-04

Despite a low prevalence of chronic kidney disease (estimated glomerular filtration rate [GFR]<60 mL/min per 1.73 m2), First Nations people have high rates of kidney failure requiring chronic dialysis or kidney transplantation. We sought to examine whether the presence and severity of albuminuria contributes to the progression of chronic kidney disease to kidney failure among First Nations people. We identified all adult residents of Alberta (age≥18 yr) for whom an outpatient serum creatinine measurement was available from May 1, 2002, to Mar. 31, 2008. We determined albuminuria using urine dipsticks and categorized results as normal (i.e., no albuminuria), mild, heavy or unmeasured. Our primary outcome was progression to kidney failure (defined as the need for chronic dialysis or kidney transplantation, or a sustained doubling of serum creatinine levels). We calculated rates of progression to kidney failure by First Nations status, by estimated GFR and by albuminuria category. We determined the relative hazard of progression to kidney failure for First Nations compared with non-First Nations participants by level of albuminuria and estimated GFR. Of the 1 816 824 participants we identified, 48 669 (2.7%) were First Nations. First Nations people were less likely to have normal albuminuria compared with non-First Nations people (38.7% v. 56.4%). Rates of progression to kidney failure were consistently 2- to 3-fold higher among First Nations people than among non-First Nations people, across all levels of albuminuria and estimated GFRs. Compared with non-First Nations people, First Nations people with an estimated GFR of 15.0-29.9 mL/min per 1.73 m2 had the highest risk of progression to kidney failure, with similar hazard ratios for those with normal and heavy albuminuria. Albuminuria confers a similar risk of progression to kidney failure for First Nations and non-First Nations people.

Mechanisms Explaining the Influence of Subclinical Hypothyroidism on the Onset and Progression of Chronic Heart Failure.

PubMed

Triggiani, Vincenzo; Angelo Giagulli, Vito; De Pergola, Giovanni; Licchelli, Brunella; Guastamacchia, Edoardo; Iacoviello, Massimo

2016-01-01

Subclinical hypothyroidism can be associated with the onset and progression of chronic heart failure. We undertook a careful search of the literature aiming to review the possible pathogenetic mechanisms explaining the influence of subclinical hypothyroidism on the onset and progression of chronic heart failure. Thyroid hormones can influence the expression of genes involved in calcium handling and contractile properties of myocardiocytes. Subclinical hypothyroidism, therefore, can alter both cardiovascular morphology and function leading to changes in myocardiocytes shape and structure, and to alterations of both contractile and relaxing properties, impairing systolic as well as diastolic functions. Furthermore, it can favour dyslipidemia, endothelial dysfunction and diastolic hypertension, favouring atherogenesis and coronary heart disease, possibly evolving into chronic heart failure. Beside an influence on the onset of chronic heart failure, subclinical hypothyroidism can represent a risk factor for its progression, in particular hospitalization and mortality but the mechanisms involved need to be fully elucidated. Subclinical hypothyroidism can be associated with the onset of chronic heart failure, because it can favour two frequent conditions that can evolve in heart failure: coronary heart disease and hypertension; it can also alter both cardiovascular morphology and function leading to heart failure progression in patients already affected through mechanisms still not completely understood.

Why Do Medial Unicompartmental Knee Arthroplasties Fail Today?

PubMed

van der List, Jelle P; Zuiderbaan, Hendrik A; Pearle, Andrew D

2016-05-01

Failure rates are higher in medial unicompartmental knee arthroplasty (UKA) than total knee arthroplasty. To improve these failure rates, it is important to understand why medial UKA fail. Because individual studies lack power to show failure modes, a systematic review was performed to assess medial UKA failure modes. Furthermore, we compared cohort studies with registry-based studies, early with midterm and late failures and fixed-bearing with mobile-bearing implants. Databases of PubMed, EMBASE, and Cochrane and annual registries were searched for medial UKA failures. Studies were included when they reported >25 failures or when they reported early (<5 years), midterm (5-10 years), or late failures (>10 years). Thirty-seven cohort studies (4 level II studies and 33 level III studies) and 2 registry-based studies were included. A total of 3967 overall failures, 388 time-dependent failures, and 1305 implant design failures were identified. Aseptic loosening (36%) and osteoarthritis (OA) progression (20%) were the most common failure modes. Aseptic loosening (26%) was most common early failure mode, whereas OA progression was more commonly seen in midterm and late failures (38% and 40%, respectively). Polyethylene wear (12%) and instability (12%) were more common in fixed-bearing implants, whereas pain (14%) and bearing dislocation (11%) were more common in mobile-bearing implants. This level III systematic review identified aseptic loosening and OA progression as the major failure modes. Aseptic loosening was the main failure mode in early years and mobile-bearing implants, whereas OA progression caused most failures in late years and fixed-bearing implants. Copyright © 2016 Elsevier Inc. All rights reserved.

Internal Progressive Failure in Deep-Seated Landslides

NASA Astrophysics Data System (ADS)

Yerro, Alba; Pinyol, Núria M.; Alonso, Eduardo E.

2016-06-01

Except for simple sliding motions, the stability of a slope does not depend only on the resistance of the basal failure surface. It is affected by the internal distortion of the moving mass, which plays an important role on the stability and post-failure behaviour of a landslide. The paper examines the stability conditions and the post-failure behaviour of a compound landslide whose geometry is inspired by one of the representative cross-sections of Vajont landslide. The brittleness of the mobilized rock mass was described by a strain-softening Mohr-Coulomb model, whose parameters were derived from previous contributions. The analysis was performed by means of a MPM computer code, which is capable of modelling the whole instability procedure in a unified calculation. The gravity action has been applied to initialize the stress state. This step mobilizes part of the strength along a shearing band located just above the kink of the basal surface, leading to the formation a kinematically admissible mechanism. The overall instability is triggered by an increase of water level. The increase of pore water pressures reduces the effective stresses within the slope and it leads to a progressive failure mechanism developing along an internal shearing band which controls the stability of the compound slope. The effect of the basal shearing resistance has been analysed during the post-failure stage. If no shearing strength is considered (as predicted by a thermal pressurization analysis), the model predicts a response similar to actual observations, namely a maximum sliding velocity of 25 m/s and a run-out close to 500 m.

Combined Inhibition of the Renin-Angiotensin System and Neprilysin Positively Influences Complex Mitochondrial Adaptations in Progressive Experimental Heart Failure

PubMed Central

Reinders, Jörg; Schröder, Josef; Dietl, Alexander; Schmid, Peter M.; Jungbauer, Carsten; Resch, Markus; Maier, Lars S.; Luchner, Andreas; Birner, Christoph

2017-01-01

Background Inhibitors of the renin angiotensin system and neprilysin (RAS-/NEP-inhibitors) proved to be extraordinarily beneficial in systolic heart failure. Furthermore, compelling evidence exists that impaired mitochondrial pathways are causatively involved in progressive left ventricular (LV) dysfunction. Consequently, we aimed to assess whether RAS-/NEP-inhibition can attenuate mitochondrial adaptations in experimental heart failure (HF). Methods and Results By progressive right ventricular pacing, distinct HF stages were induced in 15 rabbits, and 6 animals served as controls (CTRL). Six animals with manifest HF (CHF) were treated with the RAS-/NEP-inhibitor omapatrilat. Echocardiographic studies and invasive blood pressure measurements were undertaken during HF progression. Mitochondria were isolated from LV tissue, respectively, and further worked up for proteomic analysis using the SWATH technique. Enzymatic activities of citrate synthase and the electron transfer chain (ETC) complexes I, II, and IV were assessed. Ultrastructural analyses were performed by transmission electron microscopy. During progression to overt HF, intricate expression changes were mainly detected for proteins belonging to the tricarboxylic acid cycle, glucose and fat metabolism, and the ETC complexes, even though ETC complex I, II, or IV enzymatic activities were not significantly influenced. Treatment with a RAS-/NEP-inhibitor then reversed some maladaptive metabolic adaptations, positively influenced the decline of citrate synthase activity, and altered the composition of each respiratory chain complex, even though this was again not accompanied by altered ETC complex enzymatic activities. Finally, ultrastructural evidence pointed to a reduction of autophagolytic and degenerative processes with omapatrilat-treatment. Conclusions This study describes complex adaptations of the mitochondrial proteome in experimental tachycardia-induced heart failure and shows that a combined RAS-/NEP-inhibition can beneficially influence mitochondrial key pathways. PMID:28076404

Assessment of Intralaminar Progressive Damage and Failure Analysis Using an Efficient Evaluation Framework

NASA Technical Reports Server (NTRS)

Hyder, Imran; Schaefer, Joseph; Justusson, Brian; Wanthal, Steve; Leone, Frank; Rose, Cheryl

2017-01-01

Reducing the timeline for development and certification for composite structures has been a long standing objective of the aerospace industry. This timeline can be further exacerbated when attempting to integrate new fiber-reinforced composite materials due to the large number of testing required at every level of design. computational progressive damage and failure analysis (PDFA) attempts to mitigate this effect; however, new PDFA methods have been slow to be adopted in industry since material model evaluation techniques have not been fully defined. This study presents an efficient evaluation framework which uses a piecewise verification and validation (V&V) approach for PDFA methods. Specifically, the framework is applied to evaluate PDFA research codes within the context of intralaminar damage. Methods are incrementally taken through various V&V exercises specifically tailored to study PDFA intralaminar damage modeling capability. Finally, methods are evaluated against a defined set of success criteria to highlight successes and limitations.

Prediction of progressive damage and strength of plain weave composites using the finite element method

NASA Astrophysics Data System (ADS)

Srirengan, Kanthikannan

The overall objective of this research was to develop the finite element code required to efficiently predict the strength of plain weave composite structures. Towards which, three-dimensional conventional progressive damage analysis was implemented to predict the strength of plain weave composites subjected to periodic boundary conditions. Also, modal technique for three-dimensional global/local stress analysis was developed to predict the failure initiation in plain weave composite structures. The progressive damage analysis was used to study the effect of quadrature order, mesh refinement and degradation models on the predicted damage and strength of plain weave composites subjected to uniaxial tension in the warp tow direction. A 1/32sp{nd} part of the representative volume element of a symmetrically stacked configuration was analyzed. The tow geometry was assumed to be sinusoidal. Graphite/Epoxy system was used. Maximum stress criteria and combined stress criteria were used to predict failure in the tows and maximum principal stress criterion was used to predict failure in the matrix. Degradation models based on logical reasoning, micromechanics idealization and experimental comparisons were used to calculate the effective material properties with of damage. Modified Newton-Raphson method was used to determine the incremental solution for each applied strain level. Using a refined mesh and the discount method based on experimental comparisons, the progressive damage and the strength of plain weave composites of waviness ratios 1/3 and 1/6 subjected to uniaxial tension in the warp direction have been characterized. Plain weave composites exhibit a brittle response in uniaxial tension. The strength decreases significantly with the increase in waviness ratio. Damage initiation and collapse were caused dominantly due to intra-tow cracking and inter-tow debonding respectively. The predicted strength of plain weave composites of racetrack geometry and waviness ratio 1/25.7 was compared with analytical predictions and experimental findings and was found to match well. To evaluate the performance of the modal technique, failure initiation in a short woven composite cantilevered plate subjected to end moment and transverse end load was predicted. The global/local predictions were found to reasonably match well with the conventional finite element predictions.

Assessing the Risk of Progression From Asymptomatic Left Ventricular Dysfunction to Overt Heart Failure: A Systematic Overview and Meta-Analysis.

PubMed

Echouffo-Tcheugui, Justin B; Erqou, Sebhat; Butler, Javed; Yancy, Clyde W; Fonarow, Gregg C

2016-04-01

This study sought to provide estimates of the risk of progression to overt heart failure (HF) from systolic or diastolic asymptomatic left ventricular dysfunction through a systematic review and meta-analysis. Precise population-based estimates on the progression from asymptomatic left ventricular dysfunction (or stage B HF) to clinical HF (stage C HF) remain limited, despite its prognostic and clinical implications. Pre-emptive intervention with neurohormonal modulation may attenuate disease progression. MEDLINE and EMBASE were systematically searched (until March 2015). Cohort studies reporting on the progression from asymptomatic left ventricular systolic dysfunction (ALVSD) or asymptomatic left ventricular diastolic dysfunction (ALVDD) to overt HF were included. Effect estimates (prevalence, incidence, and relative risk) were pooled using a random-effects model meta-analysis, separately for systolic and diastolic dysfunction, with heterogeneity assessed with the I(2) statistic. Thirteen reports based on 11 distinct studies of progression of ALVSD were included in the meta-analysis assessing a total of 25,369 participants followed for 7.9 years on average. The absolute risks of progression to HF were 8.4 per 100 person-years (95% confidence interval [CI]: 4.0 to 12.8 per 100 person-years) for those with ALVSD, 2.8 per 100 person-years (95% CI: 1.9 to 3.7 per 100 person-years) for those with ALVDD, and 1.04 per 100 person-years (95% CI: 0.0 to 2.2 per 100 person-years) without any ventricular dysfunction evident. The combined maximally adjusted relative risk of HF for ALVSD was 4.6 (95% CI: 2.2 to 9.8), and that of ALVDD was 1.7 (95% CI: 1.3 to 2.2). ALVSD and ALVDD are each associated with a substantial risk for incident HF indicating an imperative to develop effective intervention at these stages. Copyright © 2016 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Pushover analysis of reinforced concrete frames considering shear failure at beam-column joints

NASA Astrophysics Data System (ADS)

Sung, Y. C.; Lin, T. K.; Hsiao, C. C.; Lai, M. C.

2013-09-01

Since most current seismic capacity evaluations of reinforced concrete (RC) frame structures are implemented by either static pushover analysis (PA) or dynamic time history analysis, with diverse settings of the plastic hinges (PHs) on such main structural components as columns, beams and walls, the complex behavior of shear failure at beam-column joints (BCJs) during major earthquakes is commonly neglected. This study proposes new nonlinear PA procedures that consider shear failure at BCJs and seek to assess the actual damage to RC structures. Based on the specifications of FEMA-356, a simplified joint model composed of two nonlinear cross struts placed diagonally over the location of the plastic hinge is established, allowing a sophisticated PA to be performed. To verify the validity of this method, the analytical results for the capacity curves and the failure mechanism derived from three different full-size RC frames are compared with the experimental measurements. By considering shear failure at BCJs, the proposed nonlinear analytical procedures can be used to estimate the structural behavior of RC frames, including seismic capacity and the progressive failure sequence of joints, in a precise and effective manner.

Continuum Damage Mechanics Models for the Analysis of Progressive Failure in Open-Hole Tension Laminates

NASA Technical Reports Server (NTRS)

Song, Kyonchan; Li, Yingyong; Rose, Cheryl A.

2011-01-01

The performance of a state-of-the-art continuum damage mechanics model for interlaminar damage, coupled with a cohesive zone model for delamination is examined for failure prediction of quasi-isotropic open-hole tension laminates. Limitations of continuum representations of intra-ply damage and the effect of mesh orientation on the analysis predictions are discussed. It is shown that accurate prediction of matrix crack paths and stress redistribution after cracking requires a mesh aligned with the fiber orientation. Based on these results, an aligned mesh is proposed for analysis of the open-hole tension specimens consisting of different meshes within the individual plies, such that the element edges are aligned with the ply fiber direction. The modeling approach is assessed by comparison of analysis predictions to experimental data for specimen configurations in which failure is dominated by complex interactions between matrix cracks and delaminations. It is shown that the different failure mechanisms observed in the tests are well predicted. In addition, the modeling approach is demonstrated to predict proper trends in the effect of scaling on strength and failure mechanisms of quasi-isotropic open-hole tension laminates.

Investigation of Composite Structures

NASA Technical Reports Server (NTRS)

Hyer, Michael W.

2000-01-01

This final report consists of a compilation of four separate written documents, three dealing with the response and failure of elliptical composite cylinders to an internal pressure load, and the fourth dealing with the influence of manufacturing imperfections in curved composite panels. The three focused on elliptical cylinders consist of the following: 1 - A paper entitled "Progressive Failure Analysis of Internally Pressurized Elliptical Composite Cylinders," 2 - A paper entitled "Influence of Geometric Nonlinearities on the Response and Failure of Internally Pressurized Elliptical Composite Cylinders," and 3 - A report entitled "Response and Failure of Internally Pressurized Elliptical Composite Cyclinders." The document which deals with the influence of manufacturing imperfections is a paper entitled "Manufacturing Distortions of Curved Composite Panels."

Flat Plate Solar Array Project: Proceedings of the 20th Project Integration Meeting

NASA Technical Reports Server (NTRS)

Mcdonald, R. R.

1982-01-01

Progress made by the Flat-Plate Solar Array Project during the period November 1981 to April 1982 is reported. Project analysis and integration, technology research in silicon material, large-area silicon sheet and environmental isolation, cell and module formation, engineering sciences, and module performance and failure analysis are covered.

Structural Analysis for the American Airlines Flight 587 Accident Investigation: Global Analysis

NASA Technical Reports Server (NTRS)

Young, Richard D.; Lovejoy, Andrew E.; Hilburger, Mark W.; Moore, David F.

2005-01-01

NASA Langley Research Center (LaRC) supported the National Transportation Safety Board (NTSB) in the American Airlines Flight 587 accident investigation due to LaRC's expertise in high-fidelity structural analysis and testing of composite structures and materials. A Global Analysis Team from LaRC reviewed the manufacturer s design and certification procedures, developed finite element models and conducted structural analyses, and participated jointly with the NTSB and Airbus in subcomponent tests conducted at Airbus in Hamburg, Germany. The Global Analysis Team identified no significant or obvious deficiencies in the Airbus certification and design methods. Analysis results from the LaRC team indicated that the most-likely failure scenario was failure initiation at the right rear main attachment fitting (lug), followed by an unstable progression of failure of all fin-to-fuselage attachments and separation of the VTP from the aircraft. Additionally, analysis results indicated that failure initiates at the final observed maximum fin loading condition in the accident, when the VTP was subjected to loads that were at minimum 1.92 times the design limit load condition for certification. For certification, the VTP is only required to support loads of 1.5 times design limit load without catastrophic failure. The maximum loading during the accident was shown to significantly exceed the certification requirement. Thus, the structure appeared to perform in a manner consistent with its design and certification, and failure is attributed to VTP loads greater than expected.

[New markers of progression of chronic heart failure in patients with myocardial infarction, type 2 diabetes and obesity].

PubMed

Kravchun, P P; Kadykova, O I; Gabisonia, T N

2015-01-01

Currently identified a large number of biomarkers that are closely linked with the development of chronic heart failure, some of which are clusterin and fractalkine. Accordingly, the purpose of our study was - to evaluate the role of clusterin and fractalkine in progression of chronic heart failure in patients with postinfarction cardiosclerosis, type 2 diabetes and obesity. We investigated 71 patients with postinfarction cardiosclerosis, type 2 diabetes and obesity. All patients with postinfarction cardiosclerosis, diabetes and obesity were divided into groups according to the functional class of chronic heart failure (CHF). It was found that an increase the level of fractalkine and reduced clusterin leads due to the development of systolic dysfunction and heart failure progression in patients with postinfarction cardiosclerosis, type 2 diabetes and obesity. Fractalkine and clusterin play an important role in progression of the heart failure in patients with postinfarction cardiosclerosis, type 2 diabetes and obesity, and this gives them the right to be considered indicators of the severity of CHF.

Risk stratification on the basis of Deauville score on PET-CT and the presence of Epstein-Barr virus DNA after completion of primary treatment for extranodal natural killer/T-cell lymphoma, nasal type: a multicentre, retrospective analysis.

PubMed

Kim, Seok Jin; Choi, Joon Young; Hyun, Seung Hyup; Ki, Chang-Seok; Oh, Dongryul; Ahn, Yong Chan; Ko, Young Hyeh; Choi, Sunkyu; Jung, Sin-Ho; Khong, Pek-Lan; Tang, Tiffany; Yan, Xuexian; Lim, Soon Thye; Kwong, Yok-Lam; Kim, Won Seog

2015-02-01

Assessment of tumour viability after treatment is essential for prediction of treatment failure in patients with extranodal natural killer/T-cell lymphoma (ENKTL). We aimed to assess the use of the post-treatment Deauville score on PET-CT and Epstein-Barr virus DNA as a predictor of residual tumour, to establish the risk of treatment failure in patients with newly diagnosed ENKTL. In a retrospective analysis of patient data we assessed the prognostic relevance of the Deauville score (five-point scale) on PET-CT and circulating Epstein-Barr virus DNA after completion of treatment in consecutive patients with ENKTL who met eligibility criteria (newly diagnosed and received non-anthracycline-based chemotherapy, concurrent chemoradiotherapy, or both together) diagnosed at the Samsung Medical Center in Seoul, South Korea. The primary aim was to assess the association between progression-free survival and risk stratification based on post-treatment Deauville score and Epstein-Barr virus DNA. With an independent cohort from two different hospitals (Hong Kong and Singapore), we validated the prognostic value of our risk model. We included 102 patients diagnosed with ENKTL between Jan 6, 2005, and Nov 18, 2013, in the study cohort, and 38 patients diagnosed with ENKTL between Jan 7, 2009, and June 27, 2013, in the validation cohort. In the study cohort after a median follow-up of 47·2 months (IQR 30·0-65·5), 45 (44%) patients had treatment failure and 33 (32%) had died. Post-treatment Deauville score and Epstein-Barr virus DNA positivity were independently associated with progression-free and overall survival in the multivariable analysis (for post-treatment Deauville score of 3-4, progression-free survival hazard ratio [HR] 3·607, 95% CI 1·772-7·341, univariable p<0·0001; for post-treatment Epstein-Barr virus DNA positivity, progression-free survival HR 3·595, 95% CI 1·598-8·089, univariable p<0·0001). We stratified patients into three groups based on risk of treatment failure: a low-risk group (post-treatment Epstein-Barr virus negativity and post-treatment Deauville score of 1-2), a high-risk group (post-treatment Epstein-Barr virus negativity with a Deauville score 3-4, or post-treatment Epstein-Barr virus positivity with a Deauville score 1-2), and treatment failure (Deauville score of 5 or post-treatment Epstein-Barr positivity with a Deauville of score 3-4). This risk model showed a significant association with progression-free survival (for low risk vs high risk, HR 7·761, 95% CI 2·592-23·233, p<0·0001; for low risk vs failure, HR 18·546, 95% CI 5·997-57·353, p<0·0001). The validation cohort showed the same associations (for low risk vs high risk, HR 22·909, 95% CI 2·850-184·162, p=0·003; for low risk vs failure, HR 50·652, 95% CI 6·114-419·610, p<0·0001). Post-treatment Deauville score on PET-CT scan and the presence of Epstein-Barr virus DNA can predict the risk of treatment failure in patients with ENKTL. Our results might be able to help guide clinical practice. Samsung Biomedical Research Institute. Copyright © 2015 Elsevier Ltd. All rights reserved.

Mechanisms of fibrosis in acute liver failure.

PubMed

He, Yingli; Jin, Li; Wang, Jing; Yan, Zhi; Chen, Tianyan; Zhao, Yingren

2015-07-01

Acute liver failure (ALF) is a condition with high mortality and morbidity. Fibrosis in chronic liver disease was extensively researched, whereas fibrosis and underlying mechanism in acute liver failure remains unclear. Hepatitis B virus related ALF patients were recruited to investigate if there was ongoing fibrosis by liver histology and liver stiffness measurement(LSM) analysis as well as fibrosis markers assay. Sera HMGB1 were kinetically detected in progression and remission stage of ALF. Hepatic stellate cell(HSC) activation by HMGB1 was explored by testing mRNA and protein level of α-SMA and collagen 1a1 by using qPCR and western blot. Autophagy induction by HMGB1 was explored by LC3-II conversion, autophagy flux and fluorescence. Firstly, ongoing fibrosis in progression stage of ALF was confirmed by histological analysis, LS measurement as well as fibrosis markers detection. HSC activation and autophagy induction in explanted liver tissue also revealed. Next, kinetic monitoring sera HMGB1 revealed elevated HMGB1 in progression stage of ALF vs HBsAg carrier, and drop back to base level in remission stage. Thirdly, rHMGB1 dose dependently activated HSCs, as indicated by increased mRNA and proteins level in α-SMA and collagen 1a1. Moreover, autophagy was induced in HSC treated with rHMGB1, as illustrated by increased LC3 lipidation, elevated autophagy flux and GFP-LC3 puncta. Acute liver failure is accompanied by ongoing fibrosis, HSC activation and autophagy induction. Increased HMGB1 activates HSC via autophagy induction. Those findings integrate HMGB1, HSCs activation, autophagy into a common framework that underlies the fibrosis in ALF. © 2014 The Authors. Liver International Published by John Wiley & Sons Ltd.

Obesity and heart failure as a mediator of the cerebrorenal interaction.

PubMed

Jindal, Ankur; Whaley-Connell, Adam; Sowers, James R

2013-01-01

The obesity epidemic is contributing substantially to the burden of cardiovascular disease including heart disease and congestive heart failure, in the United States and the rest of the world. Overnutrition as a driver of obesity, promotes alterations in fatty acid, lipid, and glucose metabolism that influence myocardial function and progression of heart failure from diastolic to systolic failure. The association of progressive heart failure and progressive chronic kidney disease is well documented and often referred to as the cardiorenal syndrome, as well as a prognosticator for cerebrovascular disease (e.g. stroke). Whether the relationship between obesity, heart disease/failure and risk for chronic kidney disease and stroke is direct or a confluence of risk factors is poorly understood. Copyright © 2013 S. Karger AG, Basel.

Modeling of Electrical Cable Failure in a Dynamic Assessment of Fire Risk

NASA Astrophysics Data System (ADS)

Bucknor, Matthew D.

Fires at a nuclear power plant are a safety concern because of their potential to defeat the redundant safety features that provide a high level of assurance of the ability to safely shutdown the plant. One of the added complexities of providing protection against fires is the need to determine the likelihood of electrical cable failure which can lead to the loss of the ability to control or spurious actuation of equipment that is required for safe shutdown. A number of plants are now transitioning from their deterministic fire protection programs to a risk-informed, performance based fire protection program according to the requirements of National Fire Protection Association (NFPA) 805. Within a risk-informed framework, credit can be taken for the analysis of fire progression within a fire zone that was not permissible within the deterministic framework of a 10 CFR 50.48 Appendix R safe shutdown analysis. To perform the analyses required for the transition, plants need to be able to demonstrate with some level of assurance that cables related to safe shutdown equipment will not be compromised during postulated fire scenarios. This research contains the development of new cable failure models that have the potential to more accurately predict electrical cable failure in common cable bundle configurations. Methods to determine the thermal properties of the new models from empirical data are presented along with comparisons between the new models and existing techniques used in the nuclear industry today. A Dynamic Event Tree (DET) methodology is also presented which allows for the proper treatment of uncertainties associated with fire brigade intervention and its effects on cable failure analysis. Finally a shielding analysis is performed to determine the effects on the temperature response of a cable bundle that is shielded from a fire source by an intervening object such as another cable tray. The results from the analyses demonstrate that models of similar complexity to existing cable failure techniques and tuned to empirical data can better approximate the temperature response of a cables located in tightly packed cable bundles. The new models also provide a way to determine the conditions insides a cable bundle which allows for separate treatment of cables on the interior of the bundle from cables on the exterior of the bundle. The results from the DET analysis show that the overall assessed probability of cable failure can be significantly reduced by more realistically accounting for the influence that the fire brigade has on a fire progression scenario. The shielding analysis results demonstrate a significant reduction in the temperature response of a shielded versus a non-shielded cable bundle; however the computational cost of using a fire progression model that can capture these effects may be prohibitive for performing DET analyses with currently available computational fluid dynamics models and computational resources.

Plasma microvesicle analysis identifies microRNA 129-5p as a biomarker of heart failure in univentricular heart disease.

PubMed

Ramachandran, Sweta; Lowenthal, Alexander; Ritner, Carissa; Lowenthal, Shiri; Bernstein, Harold S

2017-01-01

Biomarkers of heart failure in adults have been extensively studied. However, biomarkers to monitor the progression of heart failure in children with univentricular physiology are less well understood. We proposed that as mediators of diverse pathophysiology, miRNAs contained within circulating microvesicles could serve as biomarkers for the presence and progression of heart failure in univentricular patients. To test this, we studied the association of heart failure with elevations in specific miRNAs isolated from circulating microvesicles in a cohort of children with univentricular heart disease and heart failure. We conducted a single site cross-sectional observational study of 71 children aged 1 month-7 years with univentricular heart disease and heart failure. We demonstrated that levels of miR129-5p isolated from plasma microvesicles were inversely related to the degree of clinical heart failure as assessed by Ross score. We then showed that miR129-5p levels are downregulated in HL1 cells and human embryonic stem cell-derived cardiomyocytes exposed to oxidative stress. We demonstrated that bone morphogenetic protein receptor 2, which has been implicated in the development of pulmonary vascular disease, is a target of miR129-5p, and conversely regulated in response to oxidative stress in cell culture. Levels of miR129-5p were inversely related to the degree of clinical heart failure in patients with univentricular heart disease. This study demonstrates that miR129-5p is a sensitive and specific biomarker for heart failure in univentricular heart disease independent of ventricular morphology or stage of palliation. Further study is warranted to understand the targets affected by miR129-5p with the development of heart failure in patients with univentricular physiology.

Understanding the causes of kidney transplant failure: the dominant role of antibody-mediated rejection and nonadherence.

PubMed

Sellarés, J; de Freitas, D G; Mengel, M; Reeve, J; Einecke, G; Sis, B; Hidalgo, L G; Famulski, K; Matas, A; Halloran, P F

2012-02-01

We prospectively studied kidney transplants that progressed to failure after a biopsy for clinical indications, aiming to assign a cause to every failure. We followed 315 allograft recipients who underwent indication biopsies at 6 days to 32 years posttransplant. Sixty kidneys progressed to failure in the follow-up period (median 31.4 months). Failure was rare after T-cell-mediated rejection and acute kidney injury and common after antibody-mediated rejection or glomerulonephritis. We developed rules for using biopsy diagnoses, HLA antibody and clinical data to explain each failure. Excluding four with missing information, 56 failures were attributed to four causes: rejection 36 (64%), glomerulonephritis 10 (18%), polyoma virus nephropathy 4 (7%) and intercurrent events 6 (11%). Every rejection loss had evidence of antibody-mediated rejection by the time of failure. Among rejection losses, 17 of 36 (47%) had been independently identified as nonadherent by attending clinicians. Nonadherence was more frequent in patients who progressed to failure (32%) versus those who survived (3%). Pure T-cell-mediated rejection, acute kidney injury, drug toxicity and unexplained progressive fibrosis were not causes of loss. This prospective cohort indicates that many actual failures after indication biopsies manifest phenotypic features of antibody-mediated or mixed rejection and also underscores the major role of nonadherence. © 2011 The American Society of Transplantation and the American Society of Transplant Surgeons.

Compression After Impact on Honeycomb Core Sandwich Panels with Thin Facesheets, Part 2: Analysis

NASA Technical Reports Server (NTRS)

Mcquigg, Thomas D.; Kapania, Rakesh K.; Scotti, Stephen J.; Walker, Sandra P.

2012-01-01

A two part research study has been completed on the topic of compression after impact (CAI) of thin facesheet honeycomb core sandwich panels. The research has focused on both experiments and analysis in an effort to establish and validate a new understanding of the damage tolerance of these materials. Part 2, the subject of the current paper, is focused on the analysis, which corresponds to the CAI testings described in Part 1. Of interest, are sandwich panels, with aerospace applications, which consist of very thin, woven S2-fiberglass (with MTM45-1 epoxy) facesheets adhered to a Nomex honeycomb core. Two sets of materials, which were identical with the exception of the density of the honeycomb core, were tested in Part 1. The results highlighted the need for analysis methods which taken into account multiple failure modes. A finite element model (FEM) is developed here, in Part 2. A commercial implementation of the Multicontinuum Failure Theory (MCT) for progressive failure analysis (PFA) in composite laminates, Helius:MCT, is included in this model. The inclusion of PFA in the present model provided a new, unique ability to account for multiple failure modes. In addition, significant impact damage detail is included in the model. A sensitivity study, used to assess the effect of each damage parameter on overall analysis results, is included in an appendix. Analysis results are compared to the experimental results for each of the 32 CAI sandwich panel specimens tested to failure. The failure of each specimen is predicted using the high-fidelity, physicsbased analysis model developed here, and the results highlight key improvements in the understanding of honeycomb core sandwich panel CAI failure. Finally, a parametric study highlights the strength benefits compared to mass penalty for various core densities.

Composite laminate free-edge reinforcement with U-shaped caps. I - Stress analysis. II - Theoretical-experimental correlation

NASA Technical Reports Server (NTRS)

Howard, W. E.; Gossard, Terry, Jr.; Jones, Robert M.

1989-01-01

The present generalized plane-strain FEM analysis for the prediction of interlaminar normal stress reduction when a U-shaped cap is bonded to the edge of a composite laminate gives attention to the highly variable transverse stresses near the free edge, cap length and thickness, and a gap under the cap due to the manufacturing process. The load-transfer mechanism between cap and laminate is found to be strain-compatibility, rather than shear lag. In the second part of this work, the three-dimensional composite material failure criteria are used in a progressive laminate failure analysis to predict failure loads of laminates with different edge-cap designs; symmetric 11-layer graphite-epoxy laminates with a one-layer cap of kevlar-epoxy are shown to carry 130-140 percent greater loading than uncapped laminates, under static tensile and tension-tension fatigue loading.

Heart rate variability in idiopathic dilated cardiomyopathy: relation to disease severity and prognosis.

PubMed Central

Yi, G.; Goldman, J. H.; Keeling, P. J.; Reardon, M.; McKenna, W. J.; Malik, M.

1997-01-01

OBJECTIVE: To assess the clinical importance of heart rate variability (HRV) in patients with idiopathic dilated cardiomyopathy (DCM). PATIENTS AND METHODS: Time domain analysis of 24 hour HRV was performed in 64 patients with DCM, 19 of their relatives with left ventricular enlargement (possible early DCM), and 33 healthy control subjects. RESULTS: Measures of HRV were reduced in patients with DCM compared with controls (P < 0.05). HRV parameters were similar in relatives and controls. Measures of HRV were lower in DCM patients in whom progressive heart failure developed (n = 28) than in those who remained clinically stable (n = 36) during a follow up of 24 (20) months (P = 0.0001). Reduced HRV was associated with NYHA functional class, left ventricular end diastolic dimension, reduced left ventricular ejection fraction, and peak exercise oxygen consumption (P < 0.05) in all patients. DCM patients with standard deviation of normal to normal RR intervals calculated over the 24 hour period (SDNN) < 50 ms had a significantly lower survival rate free of progressive heart failure than those with SDNN > 50 ms (P = 0.0002, at 12 months; P = 0.0001, during overall follow up). Stepwise multiple regression analysis showed that SDNN < 50 ms identified, independently of other clinical variables, patients who were at increased risk of developing progressive heart failure (P = 0.0004). CONCLUSIONS: HRV is reduced in patients with DCM and related to disease severity. HRV is clinically useful as an early non-invasive marker of DCM deterioration. PMID:9068391

Observation of the initiation and progression of damage in compressively loaded composite plates containing a cutout

NASA Technical Reports Server (NTRS)

Waas, A.; Babcock, C., Jr.

1986-01-01

A series of experiments was carried out to determine the mechanism of failure in compressively loaded laminated plates with a circular cutout. Real time holographic interferometry and photomicrography are used to observe the progression of failure. These observations together with post experiment plate sectioning and deplying for interior damage observation provide useful information for modelling the failure process. It is revealed that the failure is initiated as a localised instability in the zero layers, at the hole surface. With increasing load extensive delamination cracking is observed. The progression of failure is by growth of these delaminations induced by delamination buckling. Upon reaching a critical state, catastrophic failure of the plate is observed. The levels of applied load and the rate at which these events occur depend on the plate stacking sequence.

Antimicrobial treatment failures in patients with community-acquired pneumonia: causes and prognostic implications.

PubMed

Arancibia, F; Ewig, S; Martinez, J A; Ruiz, M; Bauer, T; Marcos, M A; Mensa, J; Torres, A

2000-07-01

The aim of the study was to determine the causes and prognostic implications of antimicrobial treatment failures in patients with nonresponding and progressive life-threatening, community-acquired pneumonia. Forty-nine patients hospitalized with a presumptive diagnosis of community-acquired pneumonia during a 16-mo period, failure to respond to antimicrobial treatment, and documented repeated microbial investigation >/= 72 h after initiation of in-hospital antimicrobial treatment were recorded. A definite etiology of treatment failure could be established in 32 of 49 (65%) patients, and nine additional patients (18%) had a probable etiology. Treatment failures were mainly infectious in origin and included primary, persistent, and nosocomial infections (n = 10 [19%], 13 [24%], and 11 [20%] of causes, respectively). Definite but not probable persistent infections were mostly due to microbial resistance to the administered initial empiric antimicrobial treatment. Nosocomial infections were particularly frequent in patients with progressive pneumonia. Definite persistent infections and nosocomial infections had the highest associated mortality rates (75 and 88%, respectively). Nosocomial pneumonia was the only cause of treatment failure independently associated with death in multivariate analysis (RR, 16.7; 95% CI, 1.4 to 194.9; p = 0.03). We conclude that the detection of microbial resistance and the diagnosis of nosocomial pneumonia are the two major challenges in hospitalized patients with community-acquired pneumonia who do not respond to initial antimicrobial treatment. In order to establish these potentially life-threatening etiologies, a regular microbial reinvestigation seems mandatory for all patients presenting with antimicrobial treatment failures.

[Failure modes and effects analysis in the prescription, validation and dispensing process].

PubMed

Delgado Silveira, E; Alvarez Díaz, A; Pérez Menéndez-Conde, C; Serna Pérez, J; Rodríguez Sagrado, M A; Bermejo Vicedo, T

2012-01-01

To apply a failure modes and effects analysis to the prescription, validation and dispensing process for hospitalised patients. A work group analysed all of the stages included in the process from prescription to dispensing, identifying the most critical errors and establishing potential failure modes which could produce a mistake. The possible causes, their potential effects, and the existing control systems were analysed to try and stop them from developing. The Hazard Score was calculated, choosing those that were ≥ 8, and a Severity Index = 4 was selected independently of the hazard Score value. Corrective measures and an implementation plan were proposed. A flow diagram that describes the whole process was obtained. A risk analysis was conducted of the chosen critical points, indicating: failure mode, cause, effect, severity, probability, Hazard Score, suggested preventative measure and strategy to achieve so. Failure modes chosen: Prescription on the nurse's form; progress or treatment order (paper); Prescription to incorrect patient; Transcription error by nursing staff and pharmacist; Error preparing the trolley. By applying a failure modes and effects analysis to the prescription, validation and dispensing process, we have been able to identify critical aspects, the stages in which errors may occur and the causes. It has allowed us to analyse the effects on the safety of the process, and establish measures to prevent or reduce them. Copyright © 2010 SEFH. Published by Elsevier Espana. All rights reserved.

Effect of a very low-protein diet on outcomes: long-term follow-up of the Modification of Diet in Renal Disease (MDRD) Study.

PubMed

Menon, Vandana; Kopple, Joel D; Wang, Xuelei; Beck, Gerald J; Collins, Allan J; Kusek, John W; Greene, Tom; Levey, Andrew S; Sarnak, Mark J

2009-02-01

The long-term effect of a very low-protein diet on the progression of kidney disease is unknown. We examined the effect of a very low-protein diet on the development of kidney failure and death during long-term follow-up of the Modification of Diet in Renal Disease (MDRD) Study. Long-term follow-up of study B of the MDRD Study (1989-1993). The MDRD Study examined the effects of dietary protein restriction and blood pressure control on progression of kidney disease. This analysis includes 255 trial participants with predominantly stage 4 nondiabetic chronic kidney disease. A low-protein diet (0.58 g/kg/d) versus a very low-protein diet (0.28 g/kg/d) supplemented with a mixture of essential keto acids and amino acids (0.28 g/kg/d). Kidney failure (initiation of dialysis therapy or transplantation) and all-cause mortality until December 31, 2000. Kidney failure developed in 227 (89%) participants, 79 (30.9%) died, and 244 (95.7%) reached the composite outcome of either kidney failure or death. Median duration of follow-up until kidney failure, death, or administrative censoring was 3.2 years, and median time to death was 10.6 years. In the low-protein group, 117 (90.7%) participants developed kidney failure, 30 (23.3%) died, and 124 (96.1%) reached the composite outcome. In the very low-protein group, 110 (87.3%) participants developed kidney failure, 49 (38.9%) died, and 120 (95.2%) reached the composite outcome. After adjustment for a priori-specified covariates, hazard ratios were 0.83 (95% confidence interval, 0.62 to 1.12) for kidney failure, 1.92 (95% confidence interval, 1.15 to 3.20) for death, and 0.89 (95% confidence interval, 0.67 to 1.18) for the composite outcome in the very low-protein diet group compared with the low-protein diet group. Lack of dietary protein measurements during follow-up. In long-term follow-up of the MDRD Study, assignment to a very low-protein diet did not delay progression to kidney failure, but appeared to increase the risk of death.

A Study of Failure Criteria of Fibrous Composite Materials

NASA Technical Reports Server (NTRS)

Paris, Federico; Jackson, Karen E. (Technical Monitor)

2001-01-01

The research described in this paper is focused on two areas: (1) evaluation of existing composite failure criteria in the nonlinear, explicit transient dynamic finite element code, MSC.Dytran, and (2) exploration of the possibilities for modification of material and failure models to account for large deformations, progressive failure, and interaction of damage accumulation with stress/strain response of laminated composites. Following a review of the MSC.Dytran user manual, a bibliographical review of existing failure criteria of composites was performed. The papers considered most interesting for the objective of this report are discussed in section 2. The failure criteria included in the code under consideration are discussed in section 3. A critical summary of the present procedures to perform analysis and design of composites is presented in section 4. A study of the most important historical failure criteria for fibrous composite materials and some of the more recent modifications proposed were studied. The result of this analysis highlighted inadequacies in the existing failure criteria and the need to perform some numerical analyses to elucidate the answer to questions on which some of the proposed criteria are based. A summary of these ideas, which is a proposal of studies to be developed, is presented in section 5. Finally, some ideas for future developments are summarized in section 6.

Patient characteristics as predictors of clinical outcome of distraction in treatment of severe ankle osteoarthritis.

PubMed

Marijnissen, A C A; Hoekstra, M C L; Pré, B C du; van Roermund, P M; van Melkebeek, J; Amendola, A; Maathuis, P; Lafeber, F P J G; Welsing, P M J

2014-01-01

Osteoarthritis (OA) is a slowly progressive joint disease. Joint distraction can be a treatment of choice in case of severe OA. Prediction of failure will facilitate implementation of joint distraction in clinical practice. Patients with severe ankle OA, who underwent joint distraction were included. Survival analysis was performed over 12 years (n = 25 after 12 years). Regression analyses were used to predict failures and clinical benefit at 2 years after joint distraction (n = 111). Survival analysis showed that 44% of the patients failed, 17% within 2 years and 37% within 5 years after joint distraction (n = 48 after 5 years). Survival analysis in subgroups showed that the percentage failure was only different in women (30% after 2 years) versus men (after 11 years still no 30% failure). In the multivariate analyses female gender was predictive for failure 2 years after joint distraction. Gender and functional disability at baseline predicted more pain. Functional disability and pain at baseline were associated with more functional disability. Joint distraction shows a long-term clinical beneficial outcome. However, failure rate is considerable over the years. Female patients have a higher chance of failure during follow-up. Unfortunately, not all potential predictors could be investigated and other clinically significant predictors were not found. © 2013 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

A Numerical Solution Routine for Investigating Oxidation-Induced Strength Degradation Mechanisms in SiC/SiC Composites

NASA Technical Reports Server (NTRS)

Sullivan, Roy M.

2015-01-01

The stress rupture strength of silicon carbide fiber-reinforced silicon carbide (SiCSiC) composites with a boron nitride (BN) fiber coating decreases with time within the intermediate temperature range of 700-950 C. Various theories have been proposed to explain the cause of the time dependent stress rupture strength. Some previous authors have suggested that the observed composite strength behavior is due to the inherent time dependent strength of the fibers, which is caused by the slow growth of flaws within the fibers. Flaw growth is supposedly enabled by oxidation of free carbon at the grain boundaries. The objective of this paper is to investigate the relative significance of the various theories for the time-dependent strength of SiCSiC composites. This is achieved through the development of a numerically-based progressive failure analysis routine and through the application of the routine to simulate the composite stress rupture tests. The progressive failure routine is a time marching routine with an iterative loop between a probability of fiber survival equation and a force equilibrium equation within each time step. Failure of the composite is assumed to initiate near a matrix crack and the progression of fiber failures occurs by global load sharing. The probability of survival equation is derived from consideration of the strength of ceramic fibers with randomly occurring and slow growing flaws as well as the mechanical interaction between the fibers and matrix near a matrix crack. The force equilibrium equation follows from the global load sharing presumption. The results of progressive failure analyses of the composite tests suggest that the relationship between time and stress-rupture strength is attributed almost entirely to the slow flaw growth within the fibers. Although other mechanisms may be present, they appear to have only a minor influence on the observed time dependent behavior.

Postbuckling and Growth of Delaminations in Composite Plates Subjected to Axial Compression

NASA Technical Reports Server (NTRS)

Reeder, James R.; Chunchu, Prasad B.; Song, Kyongchan; Ambur, Damodar R.

2002-01-01

The postbuckling response and growth of circular delaminations in flat and curved plates are investigated as part of a study to identify the criticality of delamination locations through the laminate thickness. The experimental results from tests on delaminated plates are compared with finite element analysis results generated using shell models. The analytical prediction of delamination growth is obtained by assessing the strain energy release rate results from the finite element model and comparing them to a mixed-mode fracture toughness failure criterion. The analytical results for onset of delamination growth compare well with experimental results generated using a 3-dimensional displacement visualization system. The record of delamination progression measured in this study has resulted in a fully 3-dimensional test case with which progressive failure models can be validated.

Constitutive behavior and progressive mechanical failure of electrodes in lithium-ion batteries

NASA Astrophysics Data System (ADS)

Zhang, Chao; Xu, Jun; Cao, Lei; Wu, Zenan; Santhanagopalan, Shriram

2017-07-01

The electrodes of lithium-ion batteries (LIB) are known to be brittle and to fail earlier than the separators during an external crush event. Thus, the understanding of mechanical failure mechanism for LIB electrodes (anode and cathode) is critical for the safety design of LIB cells. In this paper, we present experimental and numerical studies on the constitutive behavior and progression of failure in LIB electrodes. Mechanical tests were designed and conducted to evaluate the constitutive properties of porous electrodes. Constitutive models were developed to describe the stress-strain response of electrodes under uniaxial tensile and compressive loads. The failure criterion and a damage model were introduced to model their unique tensile and compressive failure behavior. The failure mechanism of LIB electrodes was studied using the blunt rod test on dry electrodes, and numerical models were built to simulate progressive failure. The different failure processes were examined and analyzed in detail numerically, and correlated with experimentally observed failure phenomena. The test results and models improve our understanding of failure behavior in LIB electrodes, and provide constructive insights on future development of physics-based safety design tools for battery structures under mechanical abuse.

Constitutive behavior and progressive mechanical failure of electrodes in lithium-ion batteries

DOE PAGES

Zhang, Chao; Xu, Jun; Cao, Lei; ...

2017-05-05

The electrodes of lithium-ion batteries (LIB) are known to be brittle and to fail earlier than the separators during an external crush event. Thus, the understanding of mechanical failure mechanism for LIB electrodes (anode and cathode) is critical for the safety design of LIB cells. In this paper, we present experimental and numerical studies on the constitutive behavior and progression of failure in LIB electrodes. Mechanical tests were designed and conducted to evaluate the constitutive properties of porous electrodes. Constitutive models were developed to describe the stress-strain response of electrodes under uniaxial tensile and compressive loads. The failure criterion andmore » a damage model were introduced to model their unique tensile and compressive failure behavior. The failure mechanism of LIB electrodes was studied using the blunt rod test on dry electrodes, and numerical models were built to simulate progressive failure. The different failure processes were examined and analyzed in detail numerically, and correlated with experimentally observed failure phenomena. Finally, the test results and models improve our understanding of failure behavior in LIB electrodes, and provide constructive insights on future development of physics-based safety design tools for battery structures under mechanical abuse.« less

Nonlinear and progressive failure aspects of transport composite fuselage damage tolerance

NASA Technical Reports Server (NTRS)

Walker, Tom; Ilcewicz, L.; Murphy, Dan; Dopker, Bernhard

1993-01-01

The purpose is to provide an end-user's perspective on the state of the art in life prediction and failure analysis by focusing on subsonic transport fuselage issues being addressed in the NASA/Boeing Advanced Technology Composite Aircraft Structure (ATCAS) contract and a related task-order contract. First, some discrepancies between the ATCAS tension-fracture test database and classical prediction methods is discussed, followed by an overview of material modeling work aimed at explaining some of these discrepancies. Finally, analysis efforts associated with a pressure-box test fixture are addressed, as an illustration of modeling complexities required to model and interpret tests.

Development of an engineering analysis of progressive damage in composites during low velocity impact

NASA Technical Reports Server (NTRS)

Humphreys, E. A.

1981-01-01

A computerized, analytical methodology was developed to study damage accumulation during low velocity lateral impact of layered composite plates. The impact event was modeled as perfectly plastic with complete momentum transfer to the plate structure. A transient dynamic finite element approach was selected to predict the displacement time response of the plate structure. Composite ply and interlaminar stresses were computed at selected time intervals and subsequently evaluated to predict layer and interlaminar damage. The effects of damage on elemental stiffness were then incorporated back into the analysis for subsequent time steps. Damage predicted included fiber failure, matrix ply failure and interlaminar delamination.

FAILURE ANALYSIS OF MICROFABRICATED IR-ULTRAMICROELECTRODES IN CHLORIDE MEDIA. (R825511C022)

EPA Science Inventory

The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

The Effect of Delamination on Damage Path and Failure Load Prediction for Notched Composite Laminates

NASA Technical Reports Server (NTRS)

Satyanarayana, Arunkumar; Bogert, Philip B.; Chunchu, Prasad B.

2007-01-01

The influence of delamination on the progressing damage path and initial failure load in composite laminates is investigated. Results are presented from a numerical and an experimental study of center-notched tensile-loaded coupons. The numerical study includes two approaches. The first approach considers only intralaminar (fiber breakage and matrix cracking) damage modes in calculating the progression of the damage path. In the second approach, the model is extended to consider the effect of interlaminar (delamination) damage modes in addition to the intralaminar damage modes. The intralaminar damage is modeled using progressive damage analysis (PDA) methodology implemented with the VUMAT subroutine in the ABAQUS finite element code. The interlaminar damage mode has been simulated using cohesive elements in ABAQUS. In the experimental study, 2-3 specimens each of two different stacking sequences of center-notched laminates are tensile loaded. The numerical results from the two different modeling approaches are compared with each other and the experimentally observed results for both laminate types. The comparisons reveal that the second modeling approach, where the delamination damage mode is included together with the intralaminar damage modes, better simulates the experimentally observed damage modes and damage paths, which were characterized by splitting failures perpendicular to the notch tips in one or more layers. Additionally, the inclusion of the delamination mode resulted in a better prediction of the loads at which the failure took place, which were higher than those predicted by the first modeling approach which did not include delaminations.

Stochastic-Strength-Based Damage Simulation of Ceramic Matrix Composite Laminates

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Mital, Subodh K.; Murthy, Pappu L. N.; Bednarcyk, Brett A.; Pineda, Evan J.; Bhatt, Ramakrishna T.; Arnold, Steven M.

2016-01-01

The Finite Element Analysis-Micromechanics Analysis Code/Ceramics Analysis and Reliability Evaluation of Structures (FEAMAC/CARES) program was used to characterize and predict the progressive damage response of silicon-carbide-fiber-reinforced reaction-bonded silicon nitride matrix (SiC/RBSN) composite laminate tensile specimens. Studied were unidirectional laminates [0] (sub 8), [10] (sub 8), [45] (sub 8), and [90] (sub 8); cross-ply laminates [0 (sub 2) divided by 90 (sub 2),]s; angled-ply laminates [plus 45 (sub 2) divided by -45 (sub 2), ]s; doubled-edge-notched [0] (sub 8), laminates; and central-hole laminates. Results correlated well with the experimental data. This work was performed as a validation and benchmarking exercise of the FEAMAC/CARES program. FEAMAC/CARES simulates stochastic-based discrete-event progressive damage of ceramic matrix composite and polymer matrix composite material structures. It couples three software programs: (1) the Micromechanics Analysis Code with Generalized Method of Cells (MAC/GMC), (2) the Ceramics Analysis and Reliability Evaluation of Structures Life Prediction Program (CARES/Life), and (3) the Abaqus finite element analysis program. MAC/GMC contributes multiscale modeling capabilities and micromechanics relations to determine stresses and deformations at the microscale of the composite material repeating-unit-cell (RUC). CARES/Life contributes statistical multiaxial failure criteria that can be applied to the individual brittle-material constituents of the RUC, and Abaqus is used to model the overall composite structure. For each FEAMAC/CARES simulation trial, the stochastic nature of brittle material strength results in random, discrete damage events that incrementally progress until ultimate structural failure.

Effect of Progressive Heart Failure on Cerebral Hemodynamics and Monoamine Metabolism in CNS.

PubMed

Mamalyga, M L; Mamalyga, L M

2017-07-01

Compensated and decompensated heart failure are characterized by different associations of disorders in the brain and heart. In compensated heart failure, the blood flow in the common carotid and basilar arteries does not change. Exacerbation of heart failure leads to severe decompensation and is accompanied by a decrease in blood flow in the carotid and basilar arteries. Changes in monoamine content occurring in the brain at different stages of heart failure are determined by various factors. The functional exercise test showed unequal monoamine-synthesizing capacities of the brain in compensated and decompensated heart failure. Reduced capacity of the monoaminergic systems in decompensated heart failure probably leads to overstrain of the central regulatory mechanisms, their gradual exhaustion, and failure of the compensatory mechanisms, which contributes to progression of heart failure.

Attributions and Attitudes of Mothers and Fathers in the United States.

PubMed

Lansford, Jennifer E; Bornstein, Marc H; Dodge, Kenneth A; Skinner, Ann T; Putnick, Diane L; Deater-Deckard, Kirby

2011-01-01

OBJECTIVE.: The present study examined mean level similarities and differences as well as correlations between U.S. mothers' and fathers' attributions regarding successes and failures in caregiving situations and progressive versus authoritarian attitudes. DESIGN.: Interviews were conducted with both mothers and fathers in 139 European American, Latin American, and African American families. RESULTS.: Interactions between parent gender and ethnicity emerged for adult-controlled failure and perceived control over failure. Fathers reported higher adult-controlled failure and child-controlled failure attributions than did mothers, whereas mothers reported attitudes that were more progressive and modern than did fathers; these differences remained significant after controlling for parents' age, education, and possible social desirability bias. Ethnic differences emerged for five of the seven attributions and attitudes examined; four remained significant after controlling for parents' age, education, and possible social desirability bias. Medium effect sizes were found for concordance between parents in the same family for attributions regarding uncontrollable success, child-controlled failure, progressive attitudes, authoritarian attitudes, and modernity of attitudes after controlling for parents' age, education, and possible social desirability bias. CONCLUSIONS.: This work elucidates ways that parent gender and ethnicity relate to attributions regarding U.S. parents' successes and failures in caregiving situations and to their progressive versus authoritarian parenting attitudes.

Attributions and Attitudes of Mothers and Fathers in the United States

PubMed Central

Lansford, Jennifer E.; Bornstein, Marc H.; Dodge, Kenneth A.; Skinner, Ann T.; Putnick, Diane L.; Deater-Deckard, Kirby

2011-01-01

SYNOPSIS Objective. The present study examined mean level similarities and differences as well as correlations between U.S. mothers’ and fathers’ attributions regarding successes and failures in caregiving situations and progressive versus authoritarian attitudes. Design. Interviews were conducted with both mothers and fathers in 139 European American, Latin American, and African American families. Results. Interactions between parent gender and ethnicity emerged for adult-controlled failure and perceived control over failure. Fathers reported higher adult-controlled failure and child-controlled failure attributions than did mothers, whereas mothers reported attitudes that were more progressive and modern than did fathers; these differences remained significant after controlling for parents’ age, education, and possible social desirability bias. Ethnic differences emerged for five of the seven attributions and attitudes examined; four remained significant after controlling for parents’ age, education, and possible social desirability bias. Medium effect sizes were found for concordance between parents in the same family for attributions regarding uncontrollable success, child-controlled failure, progressive attitudes, authoritarian attitudes, and modernity of attitudes after controlling for parents’ age, education, and possible social desirability bias. Conclusions. This work elucidates ways that parent gender and ethnicity relate to attributions regarding U.S. parents’ successes and failures in caregiving situations and to their progressive versus authoritarian parenting attitudes. PMID:21822402

SRM Internal Flow Tests and Computational Fluid Dynamic Analysis. Volume 3; Titan, ASRM, and Subscale Motor Analyses

NASA Technical Reports Server (NTRS)

1995-01-01

A computational fluid dynamics (CFD) analysis has been performed on the aft slot region of the Titan 4 Solid Rocket Motor Upgrade (SRMU). This analysis was performed in conjunction with MSFC structural modeling of the propellant grain to determine if the flow field induced stresses would adversely alter the propellant geometry to the extent of causing motor failure. The results of the coupled CFD/stress analysis have shown that there is a continual increase of flow field resistance at the aft slot due to the aft segment propellant grain being progressively moved radially toward the centerline of the motor port. This 'bootstrapping' effect between grain radial movement and internal flow resistance is conducive to causing a rapid motor failure.

Cytokinesis Failure Leading to Chromosome Instability in v-Src-Induced Oncogenesis.

PubMed

Nakayama, Yuji; Soeda, Shuhei; Ikeuchi, Masayoshi; Kakae, Keiko; Yamaguchi, Naoto

2017-04-12

v-Src, an oncogene found in Rous sarcoma virus, is a constitutively active variant of c-Src. Activation of Src is observed frequently in colorectal and breast cancers, and is critical in tumor progression through multiple processes. However, in some experimental conditions, v-Src causes growth suppression and apoptosis. In this review, we highlight recent progress in our understanding of cytokinesis failure and the attenuation of the tetraploidy checkpoint in v-Src-expressing cells. v-Src induces cell cycle changes-such as the accumulation of the 4N cell population-and increases the number of binucleated cells, which is accompanied by an excess number of centrosomes. Time-lapse analysis of v-Src-expressing cells showed that cytokinesis failure is caused by cleavage furrow regression. Microscopic analysis revealed that v-Src induces delocalization of cytokinesis regulators including Aurora B and Mklp1. Tetraploid cell formation is one of the causes of chromosome instability; however, tetraploid cells can be eliminated at the tetraploidy checkpoint. Interestingly, v-Src weakens the tetraploidy checkpoint by inhibiting the nuclear exclusion of the transcription coactivator YAP, which is downstream of the Hippo pathway and its nuclear exclusion is critical in the tetraploidy checkpoint. We also discuss the relationship between v-Src-induced chromosome instability and growth suppression in v-Src-induced oncogenesis.

Probabilistic failure analysis of bone using a finite element model of mineral-collagen composites.

PubMed

Dong, X Neil; Guda, Teja; Millwater, Harry R; Wang, Xiaodu

2009-02-09

Microdamage accumulation is a major pathway for energy dissipation during the post-yield deformation of bone. In this study, a two-dimensional probabilistic finite element model of a mineral-collagen composite was developed to investigate the influence of the tissue and ultrastructural properties of bone on the evolution of microdamage from an initial defect in tension. The probabilistic failure analyses indicated that the microdamage progression would be along the plane of the initial defect when the debonding at mineral-collagen interfaces was either absent or limited in the vicinity of the defect. In this case, the formation of a linear microcrack would be facilitated. However, the microdamage progression would be scattered away from the initial defect plane if interfacial debonding takes place at a large scale. This would suggest the possible formation of diffuse damage. In addition to interfacial debonding, the sensitivity analyses indicated that the microdamage progression was also dependent on the other material and ultrastructural properties of bone. The intensity of stress concentration accompanied with microdamage progression was more sensitive to the elastic modulus of the mineral phase and the nonlinearity of the collagen phase, whereas the scattering of failure location was largely dependent on the mineral to collagen ratio and the nonlinearity of the collagen phase. The findings of this study may help understanding the post-yield behavior of bone at the ultrastructural level and shed light on the underlying mechanism of bone fractures.

Probabilistic Failure Analysis of Bone Using a Finite Element Model of Mineral-Collagen Composites

PubMed Central

Dong, X. Neil; Guda, Teja; Millwater, Harry R.; Wang, Xiaodu

2009-01-01

Microdamage accumulation is a major pathway for energy dissipation during the post-yield deformation of bone. In this study, a two-dimensional probabilistic finite element model of a mineral-collagen composite was developed to investigate the influence of the tissue and ultrastructural properties of bone on the evolution of microdamage from an initial defect in tension. The probabilistic failure analyses indicated that the microdamage progression would be along the plane of the initial defect when the debonding at mineral-collagen interfaces was either absent or limited in the vicinity of the defect. In this case, the formation of a linear microcrack would be facilitated. However, the microdamage progression would be scattered away from the initial defect plane if interfacial debonding takes place at a large scale. This would suggest the possible formation of diffuse damage. In addition to interfacial debonding, the sensitivity analyses indicated that the microdamage progression was also dependent on the other material and ultrastructural properties of bone. The intensity of stress concentration accompanied with microdamage progression was more sensitive to the elastic modulus of the mineral phase and the nonlinearity of the collagen phase, whereas the scattering of failure location was largely dependent on the mineral to collagen ratio and the nonlinearity of the collagen phase. The findings of this study may help understanding the post-yield behavior of bone at the ultrastructural level and shed light on the underlying mechanism of bone fractures. PMID:19058806

What does postradiotherapy PSA nadir tell us about freedom from PSA failure and progression-free survival in patients with low and intermediate-risk localized prostate cancer?

PubMed

DeWitt, K D; Sandler, H M; Weinberg, V; McLaughlin, P W; Roach, M

2003-09-01

To determine whether the post-external beam radiotherapy (RT) prostate-specific antigen nadir (nPSA) improves our ability to predict freedom from PSA failure, progression-free survival (PFS), and overall survival. Controversy regarding the importance of nPSA after external beam RT as a prognostic indicator for patients with localized prostate cancer has continued. This analysis was based on the data from 748 patients with low and intermediate-risk localized prostate cancer treated with external beam RT alone. Patients were categorized by nPSA quartile groups with cutpoints of less than 0.3, 0.3 to less than 0.6, 0.6 to less than 1.2, and 1.2 ng/mL or greater. Both univariate and multivariate analyses were used to determine the significance of nPSA on PSA failure (American Society for Therapeutic Radiology Oncology consensus definition), PFS (death after PSA failure), and overall survival (death from any cause). Freedom from PSA failure was strongly associated with nadir quartile groups (P <0.0001). PFS was also significantly different statistically among nadir quartile groups (P = 0.02). No statistically significant difference was found in overall survival associated with nPSA at this point. nPSA is a strong independent predictor of freedom from PSA failure and PFS in patients with low and intermediate-risk localized prostate cancer treated with RT alone. Longer follow-up and larger patient numbers are required to confirm these observations.

Different impact of aspirin on renal progression in patients with predialysis advanced chronic kidney disease with or without previous stroke.

PubMed

Hsiao, Kuang-Chih; Huang, Jing-Yang; Lee, Chun-Te; Hung, Tung-Wei; Liaw, Yung-Po; Chang, Horng-Rong

2017-04-01

The benefit of reducing the risk of stroke against increasing the risk of renal progression associated with antiplatelet therapy in patients with advanced chronic kidney disease (CKD) is controversial. We enrolled 1301 adult patients with advanced CKD treated with erythropoiesis stimulating agents from January 1, 2002 to June 30, 2009 from the 2005 Longitudinal Health Insurance Database in Taiwan. All of the patients were followed until the development of the primary or secondary endpoints, or the end of the study (December 31, 2011). The primary endpoint was the development of ischemic stroke, and the secondary endpoints included hospitalization for bleeding events, cardiovascular mortality, all-cause mortality, and renal failure. The adjusted cumulative probability of events was calculated using multivariate Cox proportional regression analysis. Adjusted survival curves showed that the usage of aspirin was not associated with ischemic stroke, hospitalization for bleeding events, cardiovascular mortality or all-cause mortality, however, it was significantly associated with renal failure. In subgroup analysis, aspirin use was associated with renal failure in the patients with no history of stroke (HR, 1.41; 95% CI, 1.14-1.73), and there was a borderline interaction between previous stroke and the use of aspirin on renal failure (interaction p=0.0565). There was no significant benefit in preventing ischemic stroke in the patients with advanced CKD who received aspirin therapy. Furthermore, the use of aspirin was associated with the risk of renal failure in the patients with advanced CKD without previous stroke. Copyright © 2016 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.

Proceedings of the 21st Project Integration Meeting

NASA Technical Reports Server (NTRS)

1983-01-01

Progress made by the Flat Plate Solar Array Project during the period April 1982 to January 1983 is described. Reports on polysilicon refining, thin film solar cell and module technology development, central station electric utility activities, silicon sheet growth and characteristics, advanced photovoltaic materials, cell and processes research, module technology, environmental isolation, engineering sciences, module performance and failure analysis and project analysis and integration are included.

Fukushima Daiichi Unit 1 Uncertainty Analysis-Exploration of Core Melt Progression Uncertain Parameters-Volume II.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Denman, Matthew R.; Brooks, Dusty Marie

Sandia National Laboratories (SNL) has conducted an uncertainty analysi s (UA) on the Fukushima Daiichi unit (1F1) accident progression wit h the MELCOR code. Volume I of the 1F1 UA discusses the physical modeling details and time history results of the UA. Volume II of the 1F1 UA discusses the statistical viewpoint. The model used was developed for a previous accident reconstruction investigation jointly sponsored by the US Department of Energy (DOE) and Nuclear Regulatory Commission (NRC). The goal of this work was to perform a focused evaluation of uncertainty in core damage progression behavior and its effect on keymore » figures - of - merit (e.g., hydrogen production, fraction of intact fuel, vessel lower head failure) and in doing so assess the applicability of traditional sensitivity analysis techniques .« less

Investigation of Spiral Bevel Gear Condition Indicator Validation Via AC-29-2C Using Damage Progression Tests

NASA Technical Reports Server (NTRS)

Dempsey, Paula J.

2014-01-01

This report documents the results of spiral bevel gear rig tests performed under a NASA Space Act Agreement with the Federal Aviation Administration (FAA) to support validation and demonstration of rotorcraft Health and Usage Monitoring Systems (HUMS) for maintenance credits via FAA Advisory Circular (AC) 29-2C, Section MG-15, Airworthiness Approval of Rotorcraft (HUMS) (Ref. 1). The overarching goal of this work was to determine a method to validate condition indicators in the lab that better represent their response to faults in the field. Using existing in-service helicopter HUMS flight data from faulted spiral bevel gears as a "Case Study," to better understand the differences between both systems, and the availability of the NASA Glenn Spiral Bevel Gear Fatigue Rig, a plan was put in place to design, fabricate and test comparable gear sets with comparable failure modes within the constraints of the test rig. The research objectives of the rig tests were to evaluate the capability of detecting gear surface pitting fatigue and other generated failure modes on spiral bevel gear teeth using gear condition indicators currently used in fielded HUMS. Nineteen final design gear sets were tested. Tables were generated for each test, summarizing the failure modes observed on the gear teeth for each test during each inspection interval and color coded based on damage mode per inspection photos. Gear condition indicators (CI) Figure of Merit 4 (FM4), Root Mean Square (RMS), +/- 1 Sideband Index (SI1) and +/- 3 Sideband Index (SI3) were plotted along with rig operational parameters. Statistical tables of the means and standard deviations were calculated within inspection intervals for each CI. As testing progressed, it became clear that certain condition indicators were more sensitive to a specific component and failure mode. These tests were clustered together for further analysis. Maintenance actions during testing were also documented. Correlation coefficients were calculated between each CI, component, damage state and torque. Results found test rig and gear design, type of fault and data acquisition can affect CI performance. Results found FM4, SI1 and SI3 can be used to detect macro pitting on two more gear or pinion teeth as long as it is detected prior to progressing to other components or transitioning to another failure mode. The sensitivity of RMS to system and operational conditions limit its reliability for systems that are not maintained at steady state. Failure modes that occurred due to scuffing or fretting were challenging to detect with current gear diagnostic tools, since the damage is distributed across all the gear and pinion teeth, smearing the impacting signatures typically used to differentiate between a healthy and damaged tooth contact. This is one of three final reports published on the results of this project. In the second report, damage modes experienced in the field will be mapped to the failure modes created in the test rig. The helicopter CI data will then be re-processed with the same analysis techniques applied to spiral bevel rig test data. In the third report, results from the rig and helicopter data analysis will be correlated. Observations, findings and lessons learned using sub-scale rig failure progression tests to validate helicopter gear condition indicators will be presented.

Damage tolerance modeling and validation of a wireless sensory composite panel for a structural health monitoring system

NASA Astrophysics Data System (ADS)

Talagani, Mohamad R.; Abdi, Frank; Saravanos, Dimitris; Chrysohoidis, Nikos; Nikbin, Kamran; Ragalini, Rose; Rodov, Irena

2013-05-01

The paper proposes the diagnostic and prognostic modeling and test validation of a Wireless Integrated Strain Monitoring and Simulation System (WISMOS). The effort verifies a hardware and web based software tool that is able to evaluate and optimize sensorized aerospace composite structures for the purpose of Structural Health Monitoring (SHM). The tool is an extension of an existing suite of an SHM system, based on a diagnostic-prognostic system (DPS) methodology. The goal of the extended SHM-DPS is to apply multi-scale nonlinear physics-based Progressive Failure analyses to the "as-is" structural configuration to determine residual strength, remaining service life, and future inspection intervals and maintenance procedures. The DPS solution meets the JTI Green Regional Aircraft (GRA) goals towards low weight, durable and reliable commercial aircraft. It will take advantage of the currently developed methodologies within the European Clean sky JTI project WISMOS, with the capability to transmit, store and process strain data from a network of wireless sensors (e.g. strain gages, FBGA) and utilize a DPS-based methodology, based on multi scale progressive failure analysis (MS-PFA), to determine structural health and to advice with respect to condition based inspection and maintenance. As part of the validation of the Diagnostic and prognostic system, Carbon/Epoxy ASTM coupons were fabricated and tested to extract the mechanical properties. Subsequently two composite stiffened panels were manufactured, instrumented and tested under compressive loading: 1) an undamaged stiffened buckling panel; and 2) a damaged stiffened buckling panel including an initial diamond cut. Next numerical Finite element models of the two panels were developed and analyzed under test conditions using Multi-Scale Progressive Failure Analysis (an extension of FEM) to evaluate the damage/fracture evolution process, as well as the identification of contributing failure modes. The comparisons between predictions and test results were within 10% accuracy.

Identification and characterization of kidney transplants with good glomerular filtration rate at 1 year but subsequent progressive loss of renal function.

PubMed

Park, Walter D; Larson, Timothy S; Griffin, Matthew D; Stegall, Mark D

2012-11-15

After the first year after kidney transplantation, 3% to 5% of grafts fail each year but detailed studies of how grafts progress to failure are lacking. This study aimed to analyze the functional stability of kidney transplants between 1 and 5 years after transplantation and to identify initially well-functioning grafts with progressive decline in allograft function. The study included 788 adult conventional kidney transplants performed at the Mayo Clinic Rochester between January 2000 and December 2005 with a minimum graft survival and follow-up of 2.6 years. The modification of diet in renal disease equation for estimating glomerular filtration rate (eGFR(MDRD)) was used to calculate the slope of renal function over time using all available serum creatinine values between 1 and 5 years after transplantation. Most transplants demonstrated good function (eGFR(MDRD) ≥40 mL/min) at 1 year with positive eGFR(MDRD) slope between 1 and 5 years after transplantation. However, a subset of grafts with 1-year eGFR(MDRD) ≥40 mL/min exhibited strongly negative eGFR(MDRD) slope between 1 and 5 years suggestive of progressive loss of graft function. Forty-one percent of this subset reached graft failure during follow-up, accounting for 69% of allograft failures occurring after 2.5 years after transplantation. This pattern of progressive decline in estimated glomerular filtration rate despite good early function was associated with but not fully attributable to factors suggestive of enhanced antidonor immunity. Longitudinal analysis of serial estimated glomerular filtration ratemeasurements identifies initially well-functioning kidney transplants at high risk for subsequent graft loss. For this subset, further studies are needed to identify modifiable causes of functional decline.

Progressive failure of lower San Fernando dam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gu, W.H.; Morgenstern, N.R.; Robertson, P.K.

1993-02-01

Postearthquake deformation analyses of the lower San Fernando dam were conducted using an incremental finite-element method. In the analyses, an undrained elastoplastic model was used to simulate the collapse of liquefied materials. The model is developed based on the critical-state boundary-surface theory, the concept of steady-state strength, and the undrained behavior of liquefiable soils. A triggering condition in terms of a collapse surface was considered in this model. The hyperbolic strain-softening relationship has been introduced to simulate the postpeak behavior of liquefied materials. The analyses have shown that a progressive failure under undrained conditions may explain the observed response ofmore » the lower San Fernando dam following the 1971 earthquake. Stress redistribution initiated by the strain softening of liquefied materials is the main reason for undrained flow failures of dams, slopes, and foundations and can occur in a short period ranging from a few seconds to a few minutes. The liquefied zone after stress redistribution may be much larger than the initial liquefied zone caused directly by an earthquake. Therefore, a postearthquake deformation analysis may be essential in liquefaction stability evaluations.« less

Modeling Progressive Failure of Bonded Joints Using a Single Joint Finite Element

NASA Technical Reports Server (NTRS)

Stapleton, Scott E.; Waas, Anthony M.; Bednarcyk, Brett A.

2010-01-01

Enhanced finite elements are elements with an embedded analytical solution which can capture detailed local fields, enabling more efficient, mesh-independent finite element analysis. In the present study, an enhanced finite element is applied to generate a general framework capable of modeling an array of joint types. The joint field equations are derived using the principle of minimum potential energy, and the resulting solutions for the displacement fields are used to generate shape functions and a stiffness matrix for a single joint finite element. This single finite element thus captures the detailed stress and strain fields within the bonded joint, but it can function within a broader structural finite element model. The costs associated with a fine mesh of the joint can thus be avoided while still obtaining a detailed solution for the joint. Additionally, the capability to model non-linear adhesive constitutive behavior has been included within the method, and progressive failure of the adhesive can be modeled by using a strain-based failure criteria and re-sizing the joint as the adhesive fails. Results of the model compare favorably with experimental and finite element results.

NASA Structural Analysis Report on the American Airlines Flight 587 Accident - Local Analysis of the Right Rear Lug

NASA Technical Reports Server (NTRS)

Raju, Ivatury S; Glaessgen, Edward H.; Mason, Brian H; Krishnamurthy, Thiagarajan; Davila, Carlos G

2005-01-01

A detailed finite element analysis of the right rear lug of the American Airlines Flight 587 - Airbus A300-600R was performed as part of the National Transportation Safety Board s failure investigation of the accident that occurred on November 12, 2001. The loads experienced by the right rear lug are evaluated using global models of the vertical tail, local models near the right rear lug, and a global-local analysis procedure. The right rear lug was analyzed using two modeling approaches. In the first approach, solid-shell type modeling is used, and in the second approach, layered-shell type modeling is used. The solid-shell and the layered-shell modeling approaches were used in progressive failure analyses (PFA) to determine the load, mode, and location of failure in the right rear lug under loading representative of an Airbus certification test conducted in 1985 (the 1985-certification test). Both analyses were in excellent agreement with each other on the predicted failure loads, failure mode, and location of failure. The solid-shell type modeling was then used to analyze both a subcomponent test conducted by Airbus in 2003 (the 2003-subcomponent test) and the accident condition. Excellent agreement was observed between the analyses and the observed failures in both cases. From the analyses conducted and presented in this paper, the following conclusions were drawn. The moment, Mx (moment about the fuselage longitudinal axis), has significant effect on the failure load of the lugs. Higher absolute values of Mx give lower failure loads. The predicted load, mode, and location of the failure of the 1985-certification test, 2003-subcomponent test, and the accident condition are in very good agreement. This agreement suggests that the 1985-certification and 2003- subcomponent tests represent the accident condition accurately. The failure mode of the right rear lug for the 1985-certification test, 2003-subcomponent test, and the accident load case is identified as a cleavage-type failure. For the accident case, the predicted failure load for the right rear lug from the PFA is greater than 1.98 times the limit load of the lugs. I.

Influence of Finite Element Size in Residual Strength Prediction of Composite Structures

NASA Technical Reports Server (NTRS)

Satyanarayana, Arunkumar; Bogert, Philip B.; Karayev, Kazbek Z.; Nordman, Paul S.; Razi, Hamid

2012-01-01

The sensitivity of failure load to the element size used in a progressive failure analysis (PFA) of carbon composite center notched laminates is evaluated. The sensitivity study employs a PFA methodology previously developed by the authors consisting of Hashin-Rotem intra-laminar fiber and matrix failure criteria and a complete stress degradation scheme for damage simulation. The approach is implemented with a user defined subroutine in the ABAQUS/Explicit finite element package. The effect of element size near the notch tips on residual strength predictions was assessed for a brittle failure mode with a parametric study that included three laminates of varying material system, thickness and stacking sequence. The study resulted in the selection of an element size of 0.09 in. X 0.09 in., which was later used for predicting crack paths and failure loads in sandwich panels and monolithic laminated panels. Comparison of predicted crack paths and failure loads for these panels agreed well with experimental observations. Additionally, the element size vs. normalized failure load relationship, determined in the parametric study, was used to evaluate strength-scaling factors for three different element sizes. The failure loads predicted with all three element sizes provided converged failure loads with respect to that corresponding with the 0.09 in. X 0.09 in. element size. Though preliminary in nature, the strength-scaling concept has the potential to greatly reduce the computational time required for PFA and can enable the analysis of large scale structural components where failure is dominated by fiber failure in tension.

Fukushima Daiichi Unit 1 Accident Progression Uncertainty Analysis and Implications for Decommissioning of Fukushima Reactors - Volume I.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gauntt, Randall O.; Mattie, Patrick D.

Sandia National Laboratories (SNL) has conducted an uncertainty analysis (UA) on the Fukushima Daiichi unit (1F1) accident progression with the MELCOR code. The model used was developed for a previous accident reconstruction investigation jointly sponsored by the US Department of Energy (DOE) and Nuclear Regulatory Commission (NRC). That study focused on reconstructing the accident progressions, as postulated by the limited plant data. This work was focused evaluation of uncertainty in core damage progression behavior and its effect on key figures-of-merit (e.g., hydrogen production, reactor damage state, fraction of intact fuel, vessel lower head failure). The primary intent of this studymore » was to characterize the range of predicted damage states in the 1F1 reactor considering state of knowledge uncertainties associated with MELCOR modeling of core damage progression and to generate information that may be useful in informing the decommissioning activities that will be employed to defuel the damaged reactors at the Fukushima Daiichi Nuclear Power Plant. Additionally, core damage progression variability inherent in MELCOR modeling numerics is investigated.« less

Associations Between Neutrophil Gelatinase Associated Lipocalin, Neutrophil-to-Lymphocyte Ratio, Atrial Fibrillation and Renal Dysfunction in Chronic Heart Failure

PubMed Central

Argan, Onur; Ural, Dilek; Kozdag, Guliz; Sahin, Tayfun; Bozyel, Serdar; Aktas, Mujdat; Karauzum, Kurtulus; Yılmaz, Irem; Dervis, Emir; Agir, Aysen

2016-01-01

Background Atrial fibrillation (AF) and renal dysfunction are two common comorbidities in patients with chronic heart failure with reduced ejection fraction (HFrEF). This study evaluated the effect of permanent AF on renal function in HFrEF and investigated the associations of atrial fibrillation, neutrophil gelatinase-associated lipocalin (NGAL), and neutrophil-to-lymphocyte ratio (NLR) with adverse clinical outcome. Material/Methods Serum NGAL levels measured by ELISA and NLR were compared between patients with sinus rhythm (HFrEF-SR, n=68), with permanent AF (HFrEF-AF, n=62), and a healthy control group (n=50). Results Mean eGFR levels were significantly lower, and NLR and NGAL levels were significantly higher in the HFrEF patients than in the control patients but the difference between HFrEF-SR and HFrEF-AF was not statistically significant (NGAL: 95 ng/mL in HFrEF-SR, 113 ng/mL in HFrEF-AF and 84 ng/mL in the control group; p<0.001). Independent associates of baseline eGFR were age, hemoglobin, NLR, triiodothyronine, and pulmonary artery systolic pressure. In a mean 16 months follow-up, adverse clinical outcome defined as progression of kidney dysfunction and composite of all-cause mortality and re-hospitalization were not different between HFrEF-SR and HFrEF-AF patients. Although NGAL was associated with clinical endpoints in the univariate analysis, Cox regression analysis showed that independent predictors of increased events were the presence of signs right heart failure, C-reactive protein, NLR, triiodothyronine, and hemoglobin. In ROC analysis, a NLR >3 had a 68% sensitivity and 75% specificity to predict progression of kidney disease (AUC=0.72, 95% CI 0.58–0.85, p=0.001). Conclusions Presence of AF in patients with HFrEF was not an independent contributor of adverse clinical outcome (i.e., all-cause death, re-hospitalization) or progression of renal dysfunction. Renal dysfunction in HFrEF was associated with both NLR and NGAL levels, but systemic inflammation reflected by NLR seemed to be a more important determinant of progression of kidney dysfunction. PMID:27918494

[A case of fulminant hepatic failure secondary to hepatic metastasis of small cell lung carcinoma].

PubMed

Hwang, Young Tae; Shin, Jung Woo; Lee, Jun Ho; Hwang, Dae Sung; Eum, Jun Bum; Choi, Hye Jeong; Park, Neung Hwa

2007-12-01

Although liver metastasis is commonly found in cancer patients, fulminant hepatic failure secondary to diffuse cancer infiltration into the liver is rare. Liver metastasis-induced fulminant hepatic failure has been reported in patients with primary cancer of the gastrointestinal tract, breast and uroepithelium, and in patients with melanoma and hematologic malignancy. Small cell lung cancer is so highly invasive that hepatic metastasis is common, but rapid progression to fulminant hepatic failure is extremely rare. We report here on a case of a patient who died because of rapid progression to fulminant hepatic failure as a result of hepatic metastasis of small cell lung carcinoma.

Advanced Composite Wind Turbine Blade Design Based on Durability and Damage Tolerance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abumeri, Galib; Abdi, Frank

2012-02-16

The objective of the program was to demonstrate and verify Certification-by-Analysis (CBA) capability for wind turbine blades made from advanced lightweight composite materials. The approach integrated durability and damage tolerance analysis with robust design and virtual testing capabilities to deliver superior, durable, low weight, low cost, long life, and reliable wind blade design. The GENOA durability and life prediction software suite was be used as the primary simulation tool. First, a micromechanics-based computational approach was used to assess the durability of composite laminates with ply drop features commonly used in wind turbine applications. Ply drops occur in composite joints andmore » closures of wind turbine blades to reduce skin thicknesses along the blade span. They increase localized stress concentration, which may cause premature delamination failure in composite and reduced fatigue service life. Durability and damage tolerance (D&DT) were evaluated utilizing a multi-scale micro-macro progressive failure analysis (PFA) technique. PFA is finite element based and is capable of detecting all stages of material damage including initiation and propagation of delamination. It assesses multiple failure criteria and includes the effects of manufacturing anomalies (i.e., void, fiber waviness). Two different approaches have been used within PFA. The first approach is Virtual Crack Closure Technique (VCCT) PFA while the second one is strength-based. Constituent stiffness and strength properties for glass and carbon based material systems were reverse engineered for use in D&DT evaluation of coupons with ply drops under static loading. Lamina and laminate properties calculated using manufacturing and composite architecture details matched closely published test data. Similarly, resin properties were determined for fatigue life calculation. The simulation not only reproduced static strength and fatigue life as observed in the test, it also showed composite damage and fracture modes that resemble those reported in the tests. The results show that computational simulation can be relied on to enhance the design of tapered composite structures such as the ones used in turbine wind blades. A computational simulation for durability, damage tolerance (D&DT) and reliability of composite wind turbine blade structures in presence of uncertainties in material properties was performed. A composite turbine blade was first assessed with finite element based multi-scale progressive failure analysis to determine failure modes and locations as well as the fracture load. D&DT analyses were then validated with static test performed at Sandia National Laboratories. The work was followed by detailed weight analysis to identify contribution of various materials to the overall weight of the blade. The methodology ensured that certain types of failure modes, such as delamination progression, are contained to reduce risk to the structure. Probabilistic analysis indicated that composite shear strength has a great influence on the blade ultimate load under static loading. Weight was reduced by 12% with robust design without loss in reliability or D&DT. Structural benefits obtained with the use of enhanced matrix properties through nanoparticles infusion were also assessed. Thin unidirectional fiberglass layers enriched with silica nanoparticles were applied to the outer surfaces of a wind blade to improve its overall structural performance and durability. The wind blade was a 9-meter prototype structure manufactured and tested subject to three saddle static loading at Sandia National Laboratory (SNL). The blade manufacturing did not include the use of any nano-material. With silica nanoparticles in glass composite applied to the exterior surfaces of the blade, the durability and damage tolerance (D&DT) results from multi-scale PFA showed an increase in ultimate load of the blade by 9.2% as compared to baseline structural performance (without nano). The use of nanoparticles lead to a delay in the onset of delamination. Load-displacement relationships obtained from testing of the blade with baseline neat material were compared to the ones from analytical simulation using neat resin and using silica nanoparticles in the resin. Multi-scale PFA results for the neat material construction matched closely those from test for both load displacement and location and type of damage and failure. AlphaSTAR demonstrated that wind blade structures made from advanced composite materials can be certified with multi-scale progressive failure analysis by following building block verification approach.« less

Retrospective Analysis of Outcome Differences in Preoperative Concurrent Chemoradiation With or Without Elective Nodal Irradiation for Esophageal Squamous Cell Carcinoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsu, Feng-Ming; Cancer Research Center, National Taiwan University College of Medicine, Taipei, Taiwan; Graduate Institute of Biomedical Electronics and Bioinformatics, National Taiwan University, Taipei, Taiwan

2011-11-15

Purpose: To evaluate the efficacy and patterns of failure of elective nodal irradiation (ENI) in patients with esophageal squamous cell carcinoma (SCC) undergoing preoperative concurrent chemoradiation (CCRT) followed by radical surgery. Methods and Materials: We retrospectively studied 118 patients with AJCC Stage II to III esophageal SCC undergoing preoperative CCRT (median, 36 Gy), followed by radical esophagectomy. Of them, 73 patients (62%) had ENI and 45 patients (38%) had no ENI. Patients with ENI received radiotherapy to either supraclavicular (n = 54) or celiac (n = 19) lymphatics. Fifty-six patients (57%) received chemotherapy with paclitaxel plus cisplatin. The 3-year progression-freemore » survival, overall survival, and patterns of failure were analyzed. Distant nodal recurrence was classified into M1a and M1b regions. A separate analysis using matched cases was conducted. Results: The median follow-up was 38 months. There were no differences in pathological complete response rate (p = 0.12), perioperative mortality rate (p = 0.48), or delayed Grade 3 or greater cardiopulmonary toxicities (p = 0.44), between the groups. More patients in the non-ENI group had M1a failure than in the ENI group, with 3-year rates of 11% and 3%, respectively (p = 0.05). However, the 3-year isolated distant nodal (M1a + M1b) failure rates were not different (ENI, 10%; non-ENI, 14%; p = 0.29). In multivariate analysis, pathological nodal status was the only independent prognostic factor associated with overall survival (hazard ratio = 1.78, p = 0.045). The 3-year overall survival and progression-free survival were 45% and 45%, respectively, in the ENI group, and 52% and 43%, respectively, in the non-ENI group (p = 0.31 and 0.89, respectively). Matched cases analysis did not show a statistical difference in outcomes between the groups. Conclusions: ENI reduced the M1a failure rate but was not associated with improved outcomes in patients undergoing preoperative CCRT for esophageal SCC. Pathological nodal metastasis predicted poor outcome.« less

Retrospective analysis of outcome differences in preoperative concurrent chemoradiation with or without elective nodal irradiation for esophageal squamous cell carcinoma.

PubMed

Hsu, Feng-Ming; Lee, Jang-Ming; Huang, Pei-Ming; Lin, Chia-Chi; Hsu, Chih-Hung; Tsai, Yu-Chieh; Lee, Yung-Chie; Chia-Hsien Cheng, Jason

2011-11-15

To evaluate the efficacy and patterns of failure of elective nodal irradiation (ENI) in patients with esophageal squamous cell carcinoma (SCC) undergoing preoperative concurrent chemoradiation (CCRT) followed by radical surgery. We retrospectively studied 118 patients with AJCC Stage II to III esophageal SCC undergoing preoperative CCRT (median, 36 Gy), followed by radical esophagectomy. Of them, 73 patients (62%) had ENI and 45 patients (38%) had no ENI. Patients with ENI received radiotherapy to either supraclavicular (n = 54) or celiac (n = 19) lymphatics. Fifty-six patients (57%) received chemotherapy with paclitaxel plus cisplatin. The 3-year progression-free survival, overall survival, and patterns of failure were analyzed. Distant nodal recurrence was classified into M1a and M1b regions. A separate analysis using matched cases was conducted. The median follow-up was 38 months. There were no differences in pathological complete response rate (p = 0.12), perioperative mortality rate (p = 0.48), or delayed Grade 3 or greater cardiopulmonary toxicities (p = 0.44), between the groups. More patients in the non-ENI group had M1a failure than in the ENI group, with 3-year rates of 11% and 3%, respectively (p = 0.05). However, the 3-year isolated distant nodal (M1a + M1b) failure rates were not different (ENI, 10%; non-ENI, 14%; p = 0.29). In multivariate analysis, pathological nodal status was the only independent prognostic factor associated with overall survival (hazard ratio = 1.78, p = 0.045). The 3-year overall survival and progression-free survival were 45% and 45%, respectively, in the ENI group, and 52% and 43%, respectively, in the non-ENI group (p = 0.31 and 0.89, respectively). Matched cases analysis did not show a statistical difference in outcomes between the groups. ENI reduced the M1a failure rate but was not associated with improved outcomes in patients undergoing preoperative CCRT for esophageal SCC. Pathological nodal metastasis predicted poor outcome. Copyright © 2011 Elsevier Inc. All rights reserved.

Failure analysis of single-bolted joint for lightweight composite laminates and metal plate

NASA Astrophysics Data System (ADS)

Li, Linjie; Qu, Junli; Liu, Xiangdong

2018-01-01

A three-dimensional progressive damage model was developed in ANSYS to predict the damage accumulation of single bolted joint in composite laminates under in-plane tensile loading. First, we describe the formulation and algorithm of this model. Second, we calculate the failure loads of the joint in fibre reinforced epoxy laminated composite plates and compare it with the experiment results, which validates that our model can appropriately simulate the ultimate tensile strength of the joints and the whole process of failure of structure. Finally, this model is applied to study the failure process of the light-weight composite material (USN125). The study also has a great potential to provide a strong basis for bolted joints design in composite Laminates as well as a simple tool for comparing different laminate geometries and bolt arrangements.

SOARCA Peach Bottom Atomic Power Station Long-Term Station Blackout Uncertainty Analysis: Knowledge Advancement.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gauntt, Randall O.; Mattie, Patrick D.; Bixler, Nathan E.

2014-02-01

This paper describes the knowledge advancements from the uncertainty analysis for the State-of- the-Art Reactor Consequence Analyses (SOARCA) unmitigated long-term station blackout accident scenario at the Peach Bottom Atomic Power Station. This work assessed key MELCOR and MELCOR Accident Consequence Code System, Version 2 (MACCS2) modeling uncertainties in an integrated fashion to quantify the relative importance of each uncertain input on potential accident progression, radiological releases, and off-site consequences. This quantitative uncertainty analysis provides measures of the effects on consequences, of each of the selected uncertain parameters both individually and in interaction with other parameters. The results measure the modelmore » response (e.g., variance in the output) to uncertainty in the selected input. Investigation into the important uncertain parameters in turn yields insights into important phenomena for accident progression and off-site consequences. This uncertainty analysis confirmed the known importance of some parameters, such as failure rate of the Safety Relief Valve in accident progression modeling and the dry deposition velocity in off-site consequence modeling. The analysis also revealed some new insights, such as dependent effect of cesium chemical form for different accident progressions. (auth)« less

Numerical simulation of damage and progressive failures in composite laminates using the layerwise plate theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reddy, Y.S.

1992-01-01

The failure behavior of composite laminates is modeled numerically using the Generalized Layerwise Plate Theory (GLPT) of Reddy and a progressive failure algorithm. The Layerwise Theory of Reddy assumes a piecewise continuous displacement field through the thickness of the laminate and therefore has the ability to capture the interlaminar stress fields near the free edges and cut outs more accurately. The progressive failure algorithm is based on the assumption that the material behaves like a stable progressively fracturing solid. A three-dimensional stiffness reduction scheme is developed and implemented to study progressive failures in composite laminates. The effect of various parametersmore » such as out-of-plane material properties, boundary conditions, and stiffness reduction methods on the failure stresses and strains of a quasi-isotropic composite laminate with free edges subjected to tensile loading is studied. The ultimate stresses and strains predicted by the Generalized Layerwise Plate Theory (GLPT) and the more widely used First Order Shear Deformation Theory (FSDT) are compared with experimental results. The predictions of the GLPT are found to be in good agreement with the experimental results both qualitatively and quantitatively, while the predictions of FSDT are found to be different from experimental results both qualitatively and quantitatively. The predictive ability of various phenomenological failure criteria is evaluated with reference to the experimental results available in the literature. The effect of geometry of the test specimen and the displacement boundary conditions at the grips on the ultimate stresses and strains of a composite laminate under compressive loading is studied. The ultimate stresses and strains are found to be quite sensitive to the geometry of the test specimen and the displacement boundary conditions at the grips. The degree of sensitivity is observed to depend strongly on the lamination sequence.« less

Structural Technology Evaluation and Analysis Program (STEAP). Delivery Order 0045: Progressive Failure Analysis of Translaminar Reinforced Composite Structures

DTIC Science & Technology

2011-11-01

Approved for public release; distribution unlimited. See additional restrictions described on inside pages STINFO COPY AIR...pin density, diameter and length are some of the parameters related to the effectiveness of z-pins for increasing the delamination resistance...has received considerable attention in recent years due to increased use of composite materials in aerospace and related industries. Mainly in the

Factors Influencing Achievement in Undergraduate Social Science Research Methods Courses: A Mixed Methods Analysis

ERIC Educational Resources Information Center

Markle, Gail

2017-01-01

Undergraduate social science research methods courses tend to have higher than average rates of failure and withdrawal. Lack of success in these courses impedes students' progression through their degree programs and negatively impacts institutional retention and graduation rates. Grounded in adult learning theory, this mixed methods study…

Working session 5: Operational aspects and risk analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cizelj, L.; Donoghue, J.

1997-02-01

A general observation is that both operational aspects and risk analysis cannot be adequately discussed without information presented in other sessions. Some overlap of conclusions and recommendations is therefore to be expected. Further, it was assumed that recommendations concerning improvements in some related topics were generated by other sessions and are not repeated here. These include: (1) Knowledge on degradation mechanisms (initiation, progression, and failure). (2) Modeling of degradation (initiation, progression, and failure). (3) Capabilities of NDE methods. (4) Preventive maintenance and repair. One should note here, however, that all of these directly affect both operational and risk aspects ofmore » affected plants. A list of conclusions and recommendations is based on available presentations and discussions addressing risk and operational experience. The authors aimed at reaching as broad a consensus as possible. It should be noted here that there is no strict delineation between operational and safety aspects of degradation of steam generator tubes. This is caused by different risk perceptions in different countries/societies. The conclusions and recommendations were divided into four broad groups: human reliability; leakage monitoring; risk impact; and consequence assessment.« less

NALP3-mediated inflammation is a principal cause of progressive renal failure in oxalate nephropathy

PubMed Central

Knauf, Felix; Asplin, John R.; Granja, Ignacio; Schmidt, Insa M.; Moeckel, Gilbert; David, Rachel; Flavell, Richard A.; Aronson, Peter S.

2013-01-01

Oxalate nephropathy with renal failure is caused by multiple disorders causing hyperoxaluria due to either overproduction of oxalate (primary hyperoxaluria) or excessive absorption of dietary oxalate (enteric hyperoxaluria). To study the etiology of renal failure in crystal-induced kidney disease, we created a model of progressive oxalate nephropathy by feeding mice a diet high in soluble oxalate (high oxalate in the absence of dietary calcium). Renal histology was characterized by intratubular calcium-oxalate crystal deposition with an inflammatory response in the surrounding interstitium. Oxalate nephropathy was not found in mice fed a high oxalate diet that also contained calcium. NALP3, also known as cryopyrin, has been implicated in crystal-associated diseases such as gout and silicosis. Mice fed the diet high in soluble oxalate demonstrated increased NALP3 expression in the kidney. Nalp3-null mice were completely protected from the progressive renal failure and death that occurred in wild-type mice fed the diet high in soluble oxalate. NALP3-deficiency did not affect oxalate homeostasis, thereby excluding differences in intestinal oxalate handling to explain the observed phenotype. Thus, progressive renal failure in oxalate nephropathy results primarily from NALP3-mediated inflammation. PMID:23739234

Stochastic-Strength-Based Damage Simulation Tool for Ceramic Matrix and Polymer Matrix Composite Structures

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Bednarcyk, Brett A.; Pineda, Evan J.; Walton, Owen J.; Arnold, Steven M.

2016-01-01

Stochastic-based, discrete-event progressive damage simulations of ceramic-matrix composite and polymer matrix composite material structures have been enabled through the development of a unique multiscale modeling tool. This effort involves coupling three independently developed software programs: (1) the Micromechanics Analysis Code with Generalized Method of Cells (MAC/GMC), (2) the Ceramics Analysis and Reliability Evaluation of Structures Life Prediction Program (CARES/ Life), and (3) the Abaqus finite element analysis (FEA) program. MAC/GMC contributes multiscale modeling capabilities and micromechanics relations to determine stresses and deformations at the microscale of the composite material repeating unit cell (RUC). CARES/Life contributes statistical multiaxial failure criteria that can be applied to the individual brittle-material constituents of the RUC. Abaqus is used at the global scale to model the overall composite structure. An Abaqus user-defined material (UMAT) interface, referred to here as "FEAMAC/CARES," was developed that enables MAC/GMC and CARES/Life to operate seamlessly with the Abaqus FEA code. For each FEAMAC/CARES simulation trial, the stochastic nature of brittle material strength results in random, discrete damage events, which incrementally progress and lead to ultimate structural failure. This report describes the FEAMAC/CARES methodology and discusses examples that illustrate the performance of the tool. A comprehensive example problem, simulating the progressive damage of laminated ceramic matrix composites under various off-axis loading conditions and including a double notched tensile specimen geometry, is described in a separate report.

Quantitative ultrasonic evaluation of mechanical properties of engineering materials

NASA Technical Reports Server (NTRS)

Vary, A.

1978-01-01

Current progress in the application of ultrasonic techniques to nondestructive measurement of mechanical strength properties of engineering materials is reviewed. Even where conventional NDE techniques have shown that a part is free of overt defects, advanced NDE techniques should be available to confirm the material properties assumed in the part's design. There are many instances where metallic, composite, or ceramic parts may be free of critical defects while still being susceptible to failure under design loads due to inadequate or degraded mechanical strength. This must be considered in any failure prevention scheme that relies on fracture analysis. This review will discuss the availability of ultrasonic methods that can be applied to actual parts to assess their potential susceptibility to failure under design conditions.

Towards optimizing the sequence of bevacizumab and nitrosoureas in recurrent malignant glioma.

PubMed

Wiestler, Benedikt; Radbruch, Alexander; Osswald, Matthias; Combs, Stephanie E; Jungk, Christine; Winkler, Frank; Bendszus, Martin; Unterberg, Andreas; Platten, Michael; Wick, Wolfgang; Wick, Antje

2014-03-01

Studies on the monoclonal VEGF-A antibody bevacizumab gave raise to questions regarding the lack of an overall survival benefit, the optimal timing in the disease course and potential combination and salvage therapies. We retrospectively assessed survival, radiological progression type on bevacizumab and efficacy of salvage therapies in 42 patients with recurrent malignant gliomas who received bevacizumab and nitrosourea sequentially. 15 patients received bevacizumab followed by nitrosourea at progression and 27 patients vice versa. Time to treatment failure, defined as time from initiation of one to failure of the other treatment, was similar in both groups (9.6 vs. 9.2 months, log rank p = 0.19). Progression-free survival on nitrosoureas was comparable in both groups, while progression-free survival on bevacizumab was longer in the group receiving bevacizumab first (5.3 vs. 4.1 months, log rank p = 0.03). Survival times were similar for patients with grade III (n = 9) and grade IV (n = 33) tumors. Progression-free survival on bevacizumab for patients developing contrast-enhancing T1 progression was longer than for patients who displayed a non-enhancing T2 progression. However, post-progression survival times after bevacizumab failure were not different. Earlier treatment with bevacizumab was not associated with better outcome in this series. The fact that earlier as compared to later bevacizumab treatment does not result in a different time to treatment failure highlights the challenge for first-line or recurrence trials with bevacizumab to demonstrate an overall survival benefit if crossover of bevacizumab-naïve patients after progression occurs.

Attributions and Attitudes of Mothers and Fathers in Jordan.

PubMed

Al-Hassan, Suha; Takash, Hanan

2011-07-01

OBJECTIVE: The present study examined mean level similarities and differences as well as correlations between mothers' and fathers' attributions regarding successes and failures in caregiving situations and progressive versus authoritarian attitudes in Jordan. DESIGN: Interviews were conducted with both mothers and fathers in 112 families. RESULTS: There were no significant main effects of gender on any of the constructs of interest. Mothers and fathers reported similar levels of attributions regarding uncontrollable success, adult-controlled failure, and child-controlled failure in the same family. Regarding attitudes, mothers and fathers reported greater progressive attitudes than authoritarian attitudes. Large, significant correlations were found for concordance between parents in the same family on all seven attributions and attitudes examined; all remained significant after controlling for parents' age, education, and possible social desirability bias. Significant positive correlations were found for mothers' and fathers' attributions regarding uncontrollable success, adult-controlled failure, child-controlled failure, perceived control over failure, progressive attitudes, authoritarian attitudes, and modernity of attitudes. CONCLUSIONS: This study concluded that in Jordan mothers and fathers hold similar levels of attributions and attitudes.

Type I Diabetic Akita Mouse Model is Characterized by Abnormal Cardiac Deformation During Early Stages of Diabetic Cardiomyopathy with Speckle-Tracking Based Strain Imaging.

PubMed

Zhou, Yingchao; Xiao, Hong; Wu, Jianfei; Zha, Lingfeng; Zhou, Mengchen; Li, Qianqian; Wang, Mengru; Shi, Shumei; Li, Yanze; Lyu, Liangkun; Wang, Qing; Tu, Xin; Lu, Qiulun

2018-01-01

Diabetes mellitus (DM) has been demonstrated to have a strong association with heart failure. Conventional echocardiographic analysis cannot sensitively monitor cardiac dysfunction in type I diabetic Akita hearts, but the phenotype of heart failure is observed in molecular levels during the early stages. Male Akita (Ins2WT/C96Y) mice were monitored with echocardiographic imaging at various ages, and then with conventional echocardiographic analysis and speckle-tracking based strain analyses. With speckle-tracking based strain analyses, diabetic Akita mice showed changes in average global radial strain at the age of 12 weeks, as well as decreased longitudinal strain. These changes occurred in the early stage and remained throughout the progression of diabetic cardiomyopathy in Akita mice. Speckle-tracking showed that the detailed and precise changes of cardiac deformation in the progression of diabetic cardiomyopathy in the genetic type I diabetic Akita mice were uncoupled. We monitored early-stage changes in the heart of diabetic Akita mice. We utilize this technique to elucidate the underlying mechanism for heart failure in Akita genetic type I diabetic mice. It will further advance the assessment of cardiac abnormalities, as well as the discovery of new drug treatments using Akita genetic type I diabetic mice. © 2018 The Author(s). Published by S. Karger AG, Basel.

Failure Analysis in Platelet Molded Composite Systems

NASA Astrophysics Data System (ADS)

Kravchenko, Sergii G.

Long-fiber discontinuous composite systems in the form of chopped prepreg tapes provide an advanced, structural grade, molding compound allowing for fabrication of complex three-dimensional components. Understanding of process-structure-property relationship is essential for application of prerpeg platelet molded components, especially because of their possible irregular disordered heterogeneous morphology. Herein, a structure-property relationship was analyzed in the composite systems of many platelets. Regular and irregular morphologies were considered. Platelet-based systems with more ordered morphology possess superior mechanical performance. While regular morphologies allow for a careful inspection of failure mechanisms derived from the morphological characteristics, irregular morphologies are representative of the composite architectures resulting from uncontrolled deposition and molding with chopped prerpegs. Progressive failure analysis (PFA) was used to study the damaged deformation up to ultimate failure in a platelet-based composite system. Computational damage mechanics approaches were utilized to conduct the PFA. The developed computational models granted understanding of how the composite structure details, meaning the platelet geometry and system morphology (geometrical arrangement and orientation distribution of platelets), define the effective mechanical properties of a platelet-molded composite system, its stiffness, strength and variability in properties.

Performance analysis of a fault inferring nonlinear detection system algorithm with integrated avionics flight data

NASA Technical Reports Server (NTRS)

Caglayan, A. K.; Godiwala, P. M.; Morrell, F. R.

1985-01-01

This paper presents the performance analysis results of a fault inferring nonlinear detection system (FINDS) using integrated avionics sensor flight data for the NASA ATOPS B-737 aircraft in a Microwave Landing System (MLS) environment. First, an overview of the FINDS algorithm structure is given. Then, aircraft state estimate time histories and statistics for the flight data sensors are discussed. This is followed by an explanation of modifications made to the detection and decision functions in FINDS to improve false alarm and failure detection performance. Next, the failure detection and false alarm performance of the FINDS algorithm are analyzed by injecting bias failures into fourteen sensor outputs over six repetitive runs of the five minutes of flight data. Results indicate that the detection speed, failure level estimation, and false alarm performance show a marked improvement over the previously reported simulation runs. In agreement with earlier results, detection speed is faster for filter measurement sensors such as MLS than for filter input sensors such as flight control accelerometers. Finally, the progress in modifications of the FINDS algorithm design to accommodate flight computer constraints is discussed.

[Ten-year evolution of mechanical ventilation in acute respiratory failure in the hematogical patient admitted to the intensive care unit].

PubMed

Belenguer-Muncharaz, A; Albert-Rodrigo, L; Ferrandiz-Sellés, A; Cebrián-Graullera, G

2013-10-01

A comparison was made between invasive mechanical ventilation (IMV) and noninvasive positive pressure ventilation (NPPV) in haematological patients with acute respiratory failure. A retrospective observational study was made from 2001 to December 2011. A clinical-surgical intensive care unit (ICU) in a tertiary hospital. Patients with hematological malignancies suffering acute respiratory failure (ARF) and requiring mechanical ventilation in the form of either IMV or NPPV. Analysis of infection and organ failure rates, duration of mechanical ventilation and ICU and hospital stays, as well as ICU, hospital and mortality after 90 days. The same variables were analyzed in the comparison between NPPV success and failure. Forty-one patients were included, of which 35 required IMV and 6 NPPV. ICU mortality was higher in the IMV group (100% vs 37% in NPPV, P=.006). The intubation rate in NPPV was 40%. Compared with successful NPPV, failure in the NPPV group involved more complications, a longer duration of mechanical ventilation and ICU stay, and greater ICU and hospital mortality. Multivariate analysis of mortality in the NPPV group identified NPPV failure (OR 13 [95%CI 1.33-77.96], P=.008) and progression to acute respiratory distress syndrome (OR 10 [95%CI 1.95-89.22], P=.03) as prognostic factors. The use of NPPV reduced mortality compared with IMV. NPPV failure was associated with more complications. Copyright © 2012 Elsevier España, S.L. and SEMICYUC. All rights reserved.

Improvement of Progressive Damage Model to Predicting Crashworthy Composite Corrugated Plate

NASA Astrophysics Data System (ADS)

Ren, Yiru; Jiang, Hongyong; Ji, Wenyuan; Zhang, Hanyu; Xiang, Jinwu; Yuan, Fuh-Gwo

2018-02-01

To predict the crashworthy composite corrugated plate, different single and stacked shell models are evaluated and compared, and a stacked shell progressive damage model combined with continuum damage mechanics is proposed and investigated. To simulate and predict the failure behavior, both of the intra- and inter- laminar failure behavior are considered. The tiebreak contact method, 1D spot weld element and cohesive element are adopted in stacked shell model, and a surface-based cohesive behavior is used to capture delamination in the proposed model. The impact load and failure behavior of purposed and conventional progressive damage models are demonstrated. Results show that the single shell could simulate the impact load curve without the delamination simulation ability. The general stacked shell model could simulate the interlaminar failure behavior. The improved stacked shell model with continuum damage mechanics and cohesive element not only agree well with the impact load, but also capture the fiber, matrix debonding, and interlaminar failure of composite structure.

When Progressive Disease Does Not Mean Treatment Failure: Reconsidering the Criteria for Progression

PubMed Central

2012-01-01

Although progression-based endpoints, such as progression-free survival, are often key clinical trial endpoints for anticancer agents, the clinical meaning of “objective progression” is much less certain. As scrutiny of progression-based endpoints in clinical trials increases, it should be remembered that the Response Evaluation Criteria In Solid Tumors (RECIST) progression criteria were not developed as a surrogate for survival. Now that progression-free survival has come to be an increasingly important trial endpoint, the criteria that define progression deserve critical evaluation to determine whether alternate definitions of progression might facilitate the development of stronger surrogate endpoints and more meaningful trial results. In this commentary, we review the genesis of the criteria for progression, highlight recent data that question their value as a marker of treatment failure, and advocate for several research strategies that could lay the groundwork for a clinically validated definition of disease progression in solid tumor oncology. PMID:22927506

Comparison of clinical outcomes and genomic characteristics of single focus and multifocal glioblastoma

PubMed Central

Paulsson, Anna K.; Holmes, Jordan A.; Peiffer, Ann M.; Miller, Lance D.; Liu, Wennuan; Xu, Jianfeng; Hinson, William H.; Lesser, Glenn J.; Laxton, Adrian W.; Tatter, Stephen B.; Debinski, Waldemar

2014-01-01

We investigate the differences in molecular signature and clinical outcomes between multiple lesion glioblastoma (GBM) and single focus GBM in the modern treatment era. Between August 2000 and May 2010, 161 patients with GBM were treated with modern radiotherapy techniques. Of this group, 33 were considered to have multiple lesion GBM (25 multifocal and 8 multicentric). Patterns of failure, time to progression and overall survival were compared based on whether the tumor was considered a single focus or multiple lesion GBM. Genomic groupings and methylation status were also investigated as a possible predictor of multifocality in a cohort of 41 patients with available tissue for analysis. There was no statistically significant difference in overall survival (p < 0.3) between the multiple lesion tumors (8.2 months) and single focus GBM (11 months). Progression free survival was superior in the single focus tumors (7.1 months) as compared to multi-focal (5.6 months, p = 0.02). For patients with single focus, multifocal and multicentric GBM, 81, 76 and 88 % of treatment failures occurred in the 60 Gy volume (p < 0.5), while 54, 72, and 38 % of treatment failures occurred in the 46 Gy volume (p < 0.4). Out of field failures were rare in both single focus and multiple foci GBM (7 vs 3 %). Genomic groupings and methylation status were not found to predict for multifocality. Patterns of failure, survival and genomic signatures for multiple lesion GBM do not appreciably differ when compared to single focus tumors. PMID:24990827

Experimental Investigation on the Fatigue Mechanical Properties of Intermittently Jointed Rock Models Under Cyclic Uniaxial Compression with Different Loading Parameters

NASA Astrophysics Data System (ADS)

Liu, Yi; Dai, Feng; Dong, Lu; Xu, Nuwen; Feng, Peng

2018-01-01

Intermittently jointed rocks, widely existing in many mining and civil engineering structures, are quite susceptible to cyclic loading. Understanding the fatigue mechanism of jointed rocks is vital to the rational design and the long-term stability analysis of rock structures. In this study, the fatigue mechanical properties of synthetic jointed rock models under different cyclic conditions are systematically investigated in the laboratory, including four loading frequencies, four maximum stresses, and four amplitudes. Our experimental results reveal the influence of the three cyclic loading parameters on the mechanical properties of jointed rock models, regarding the fatigue deformation characteristics, the fatigue energy and damage evolution, and the fatigue failure and progressive failure behavior. Under lower loading frequency or higher maximum stress and amplitude, the jointed specimen is characterized by higher fatigue deformation moduli and higher dissipated hysteresis energy, resulting in higher cumulative damage and lower fatigue life. However, the fatigue failure modes of jointed specimens are independent of cyclic loading parameters; all tested jointed specimens exhibit a prominent tensile splitting failure mode. Three different crack coalescence patterns are classified between two adjacent joints. Furthermore, different from the progressive failure under static monotonic loading, the jointed rock specimens under cyclic compression fail more abruptly without evident preceding signs. The tensile cracks on the front surface of jointed specimens always initiate from the joint tips and then propagate at a certain angle with the joints toward the direction of maximum compression.

Glutaric aciduria type 2 presenting with acute respiratory failure in an adult

PubMed Central

Ersoy, Ebru Ortac; Rama, Dorina; Ünal, Özlem; Sivri, Serap; Topeli, Arzu

2015-01-01

Glutaric aciduria (GTA) type II can be seen as late onset form with myopathic phenotype. We present a case of a 19-year old female with progressive muscle weakness was admitted in intensive care unit (ICU) with respiratory failure and acute renal failure. Patient was unconscious. Pupils were anisocoric and light reflex was absent. She had hepatomegaly. The laboratory results showed a glucose level of 70 mg/dl and the liver enzymes were high. The patient also had hyponatremia (117 mEq/L) and lactate level of 3.9 mmol/L. Tandem MS and organic acid analysis were compatible with GTA type II. Carnitine 1gr, riboflavin 100 mg and co-enzymeQ10 100 mg was arranged. After four months from beginning of treatment tandem MS results are improved. Respiratory failure, acute renal failure due to profound proximal myopathy can be due to glutaric aciduria type II that responded rapidly to appropriate therapy. PMID:26236614

Glutaric aciduria type 2 presenting with acute respiratory failure in an adult.

PubMed

Ersoy, Ebru Ortac; Rama, Dorina; Ünal, Özlem; Sivri, Serap; Topeli, Arzu

2015-01-01

Glutaric aciduria (GTA) type II can be seen as late onset form with myopathic phenotype. We present a case of a 19-year old female with progressive muscle weakness was admitted in intensive care unit (ICU) with respiratory failure and acute renal failure. Patient was unconscious. Pupils were anisocoric and light reflex was absent. She had hepatomegaly. The laboratory results showed a glucose level of 70 mg/dl and the liver enzymes were high. The patient also had hyponatremia (117 mEq/L) and lactate level of 3.9 mmol/L. Tandem MS and organic acid analysis were compatible with GTA type II. Carnitine 1gr, riboflavin 100 mg and co-enzymeQ10 100 mg was arranged. After four months from beginning of treatment tandem MS results are improved. Respiratory failure, acute renal failure due to profound proximal myopathy can be due to glutaric aciduria type II that responded rapidly to appropriate therapy.

Analysis of progressive damage in thin circular laminates due to static-equivalent impact loads

NASA Technical Reports Server (NTRS)

Shivakumar, K. N.; Elber, W.; Illg, W.

1983-01-01

Clamped circular graphite/epoxy plates (25.4, 38.1, and 50.8 mm radii) with an 8-ply quasi-isotropic layup were analyzed for static-equivalent impact loads using the minimum-total-potential-energy method and the von Karman strain-displacement equations. A step-by-step incremental transverse displacement procedure was used to calculate plate load and ply stresses. The ply failure region was calculated using the Tsai-Wu criterion. The corresponding failure modes (splitting and fiber failure) were determined using the maximum stress criteria. The first-failure mode was splitting and initiated first in the bottom ply. The splitting-failure thresholds were relatively low and tended to be lower for larger plates than for small plates. The splitting-damage region in each ply was elongated in its fiber direction; the bottom ply had the largest damage region. The calculated damage region for the 25.4-mm-radius plate agreed with limited static test results from the literature.

Lifestyle modification and progressive renal failure.

PubMed

Ritz, Eberhard; Schwenger, Vedat

2005-08-01

There is increasing evidence that lifestyle factors impact on the risk of developing chronic kidney disease (CKD) and the risk of progression of CKD. Equally important is the consideration that patients with CKD are more likely to die from cardiovascular disease than to reach the stage of end-stage renal failure. It is advantageous that manoeuvres that interfere with progression at the same time also reduce the risk of cardiovascular events. Lifestyle factors that aggravate progression include, among others, smoking, obesity and dietary salt intake. Alcohol consumption, according to some preliminary information, has a bimodal relationship to cardiovascular risk and progression, with moderate consumption being protective.

Response of Honeycomb Core Sandwich Panel with Minimum Gage GFRP Face-Sheets to Compression Loading After Impact

NASA Technical Reports Server (NTRS)

McQuigg, Thomas D.; Kapania, Rakesh K.; Scotti, Stephen J.; Walker, Sandra P.

2011-01-01

A compression after impact study has been conducted to determine the residual strength of three sandwich panel constructions with two types of thin glass fiber reinforced polymer face-sheets and two hexagonal honeycomb Nomex core densities. Impact testing is conducted to first determine the characteristics of damage resulting from various impact energy levels. Two modes of failure are found during compression after impact tests with the density of the core precipitating the failure mode present for a given specimen. A finite element analysis is presented for prediction of the residual compressive strength of the impacted specimens. The analysis includes progressive damage modeling in the face-sheets. Preliminary analysis results were similar to the experimental results; however, a higher fidelity core material model is expected to improve the correlation.

Damage and failure modelling of hybrid three-dimensional textile composites: a mesh objective multi-scale approach

PubMed Central

Patel, Deepak K.

2016-01-01

This paper is concerned with predicting the progressive damage and failure of multi-layered hybrid textile composites subjected to uniaxial tensile loading, using a novel two-scale computational mechanics framework. These composites include three-dimensional woven textile composites (3DWTCs) with glass, carbon and Kevlar fibre tows. Progressive damage and failure of 3DWTCs at different length scales are captured in the present model by using a macroscale finite-element (FE) analysis at the representative unit cell (RUC) level, while a closed-form micromechanics analysis is implemented simultaneously at the subscale level using material properties of the constituents (fibre and matrix) as input. The N-layers concentric cylinder (NCYL) model (Zhang and Waas 2014 Acta Mech. 225, 1391–1417; Patel et al. submitted Acta Mech.) to compute local stress, srain and displacement fields in the fibre and matrix is used at the subscale. The 2-CYL fibre–matrix concentric cylinder model is extended to fibre and (N−1) matrix layers, keeping the volume fraction constant, and hence is called the NCYL model where the matrix damage can be captured locally within each discrete layer of the matrix volume. The influence of matrix microdamage at the subscale causes progressive degradation of fibre tow stiffness and matrix stiffness at the macroscale. The global RUC stiffness matrix remains positive definite, until the strain softening response resulting from different failure modes (such as fibre tow breakage, tow splitting in the transverse direction due to matrix cracking inside tow and surrounding matrix tensile failure outside of fibre tows) are initiated. At this stage, the macroscopic post-peak softening response is modelled using the mesh objective smeared crack approach (Rots et al. 1985 HERON 30, 1–48; Heinrich and Waas 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23–26 April 2012. AIAA 2012-1537). Manufacturing-induced geometric imperfections are included in the simulation, where the FE mesh of the unit cell is generated directly from micro-computed tomography (MCT) real data using a code Simpleware. Results from multi-scale analysis for both an idealized perfect geometry and one that includes geometric imperfections are compared with experimental results (Pankow et al. 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23–26 April 2012. AIAA 2012-1572). This article is part of the themed issue ‘Multiscale modelling of the structural integrity of composite materials’. PMID:27242294

Damage and failure modelling of hybrid three-dimensional textile composites: a mesh objective multi-scale approach.

PubMed

Patel, Deepak K; Waas, Anthony M

2016-07-13

This paper is concerned with predicting the progressive damage and failure of multi-layered hybrid textile composites subjected to uniaxial tensile loading, using a novel two-scale computational mechanics framework. These composites include three-dimensional woven textile composites (3DWTCs) with glass, carbon and Kevlar fibre tows. Progressive damage and failure of 3DWTCs at different length scales are captured in the present model by using a macroscale finite-element (FE) analysis at the representative unit cell (RUC) level, while a closed-form micromechanics analysis is implemented simultaneously at the subscale level using material properties of the constituents (fibre and matrix) as input. The N-layers concentric cylinder (NCYL) model (Zhang and Waas 2014 Acta Mech. 225, 1391-1417; Patel et al. submitted Acta Mech.) to compute local stress, srain and displacement fields in the fibre and matrix is used at the subscale. The 2-CYL fibre-matrix concentric cylinder model is extended to fibre and (N-1) matrix layers, keeping the volume fraction constant, and hence is called the NCYL model where the matrix damage can be captured locally within each discrete layer of the matrix volume. The influence of matrix microdamage at the subscale causes progressive degradation of fibre tow stiffness and matrix stiffness at the macroscale. The global RUC stiffness matrix remains positive definite, until the strain softening response resulting from different failure modes (such as fibre tow breakage, tow splitting in the transverse direction due to matrix cracking inside tow and surrounding matrix tensile failure outside of fibre tows) are initiated. At this stage, the macroscopic post-peak softening response is modelled using the mesh objective smeared crack approach (Rots et al. 1985 HERON 30, 1-48; Heinrich and Waas 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1537). Manufacturing-induced geometric imperfections are included in the simulation, where the FE mesh of the unit cell is generated directly from micro-computed tomography (MCT) real data using a code Simpleware Results from multi-scale analysis for both an idealized perfect geometry and one that includes geometric imperfections are compared with experimental results (Pankow et al. 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1572). This article is part of the themed issue 'Multiscale modelling of the structural integrity of composite materials'. © 2016 The Author(s).

Attributions and Attitudes of Mothers and Fathers in Thailand.

PubMed

Tapanya, Sombat

2011-07-01

OBJECTIVE: The present study examined similarities and differences between mothers' and fathers' attributions regarding successes and failures in caregiving situations and progressive versus authoritarian attitudes as well as correlations between mothers' and fathers' attributions and attitudes. DESIGN: Interviews were conducted with both mothers and fathers in 88 Thai families. RESULTS: Mothers and fathers did not differ in mean levels of attributions regarding successes and failures in caregiving situations or in authoritarian or progressive attitudes. Mothers' and fathers' perceived control over failure, authoritarian attitudes, progressive attitudes, and modernity of attitudes were significantly correlated. CONCLUSIONS: This work suggests high similarities between Thai mothers and fathers in their attributions and attitudes related to parenting.

A nationwide survey of hypoplastic myelodysplastic syndrome (a multicenter retrospective study).

PubMed

Kobayashi, Takashi; Nannya, Yasuhito; Ichikawa, Motoshi; Oritani, Kenji; Kanakura, Yuzuru; Tomita, Akihiro; Kiyoi, Hitoshi; Kobune, Masayoshi; Kato, Junji; Kawabata, Hiroshi; Shindo, Motohiro; Torimoto, Yoshihiro; Yonemura, Yuji; Hanaoka, Nobuyoshi; Nakakuma, Hideki; Hasegawa, Daisuke; Manabe, Atsushi; Fujishima, Naohito; Fujii, Nobuharu; Tanimoto, Mitsune; Morita, Yasuyoshi; Matsuda, Akira; Fujieda, Atsushi; Katayama, Naoyuki; Ohashi, Haruhiko; Nagai, Hirokazu; Terada, Yoshiki; Hino, Masayuki; Sato, Ken; Obara, Naoshi; Chiba, Shigeru; Usuki, Kensuke; Ohta, Masatsugu; Imataki, Osamu; Uemura, Makiko; Takaku, Tomoiku; Komatsu, Norio; Kitanaka, Akira; Shimoda, Kazuya; Watanabe, Kenichiro; Tohyama, Kaoru; Takaori-Kondo, Akifumi; Harigae, Hideo; Arai, Shunya; Miyazaki, Yasushi; Ozawa, Keiya; Kurokawa, Mineo

2017-12-01

Hypoplastic myelodysplastic syndrome (hMDS) is a distinct entity with bone marrow (BM) hypocellularity and the risk of death from BM failure (BMF). To elucidate the characteristics of hMDS, the data of 129 patients diagnosed between April 2003 and March 2012 were collected from 20 institutions and the central review team of the National Research Group on Idiopathic Bone Marrow Failure Syndromes, and compared with 115 non-hMDS patients. More RA and fewer CMMoL and RAEB-t in French-American-British (FAB) and more RCUD and MDS-U and fewer RCMD in World Health Organization (WHO) classifications were found in hMDS than non-hMDS with significant differences. The overall survival (OS) and AML progression-free survival (AML-PFS) of hMDS were higher than those of non-hMDS, especially in patients at age ≥50 and of lower risk in Revised International Prognostic Scoring System (IPSS-R). In competing risks analysis, hMDS exhibited decreased risk of AML-progression in lower IPSS or IPSS-R risk patients, and higher risk of death from BMF in patients at age ≥50. Poor performance status (PS ≥2) and high karyotype risks in IPSS-R (high and very high) were significant risk factors of death and AML-progression in Cox proportional hazards analysis. © 2017 Wiley Periodicals, Inc.

Delicate Moments: Kids Talk about Socially Complicated Issues. Occasional Paper Series 19

ERIC Educational Resources Information Center

Bauman, Amy

2007-01-01

The author offers an analysis of the failures and insights she experienced working with adolescents at a progressive school while discussing how the students understood and experienced race and identity -- their own and that of others. While she encountered students who were willing to take her into their worlds, her efforts fell flat when her…

An Analysis of Mathematics Interventions: Increased Time-on-Task Compared with Computer-Assisted Mathematics Instruction

ERIC Educational Resources Information Center

Calhoun, James M., Jr.

2011-01-01

Student achievement is not progressing on mathematics as measured by state, national, and international assessments. Much of the research points to mathematics curriculum and instruction as the root cause of student failure to achieve at levels comparable to other nations. Since mathematics is regarded as a gate keeper to many educational…

AGOR 28: SIO Shipyard Representative Bi-Weekly Progress Report

DTIC Science & Technology

2013-05-10

WATERMAN SUPPLY)(R/ASR) 368/0 AGOR27 A035- 09 STD Report - FAILURE MODE EFFECT ANALYSIS ( FMEA ) AND DESIGN VERIFCATION TEST PROCEDURE (DVTP) (DI-035-09... FMEA & DVTP - Multidrives)(R/ASR) 4/0 AGOR27 A006- 08 STD Report - PURCHASE ORDER (PO) INDEX ( PO INDEX 4-26- 13) 37/0 AGOR28 A006- 08 STD

The Advanced Glaucoma Intervention Study (AGIS): 9. Comparison of glaucoma outcomes in black and white patients within treatment groups.

PubMed

2001-09-01

To compare in eyes of black and white patients the progression of glaucoma after failure of medical therapy and upon start of surgical intervention. Cohort study analysis of data from a randomized clinical trial. This multicenter study included open-angle glaucoma patients who had failed medical therapy: 451 eyes of 332 black patients, 325 eyes of 249 white patients. Eyes were randomly assigned to an argon laser trabeculoplasty (ALT)-trabeculectomy-trabeculectomy (ATT) sequence or a trabeculectomy-ALT-trabeculectomy (TAT) sequence; they had been followed for 7 to 11 years at database closure. Main outcome measures were decrease of visual field (DVF), sustained decrease of visual field (SDVF), decrease of visual acuity (DVA), sustained decrease of visual acuity (SDVA), and failure of first surgical glaucoma intervention. Statistical methods included logistic regression to obtain average adjusted black-white odds ratios for binary outcomes, and Cox regression to estimate adjusted black-white risk ratios for time-to-event outcomes. In the ATT sequence blacks were at lower risk than whites of failure of first intervention (ALT, RR = 0.68, P = 0.040). In the TAT sequence blacks were at higher risk than whites of failure of the first intervention (trabeculectomy, RR = 1.79, P = 0.033), of intraocular pressure > or =18 mm Hg (average OR = 1.41, P = 0.026), and of DVF (average OR = 1.78, P = 0.007). In both treatment sequences, the average number of prescribed medications was greater for blacks than whites (P < or = 0.002). The results support the hypothesis that after failure of medical therapy and upon initiation of surgical intervention, an initial intervention with trabeculectomy retards the progression of glaucoma more effectively in white than in black patients. The data provide a weak suggestion that an initial surgical intervention with ALT retards the progression of glaucoma more effectively in black than in white patients.

Progressive Failure Studies of Composite Panels with and without Cutouts

NASA Technical Reports Server (NTRS)

Jaunky, Navin; Ambur, Damodar R.; Davila, Carlos G.; Hilburger, Mark; Bushnell, Dennis M. (Technical Monitor)

2001-01-01

Progressive failure analyses results are presented for composite panels with and without a cutout and subjected to in-plane shear loading and compression loading well into their postbuckling regime. Ply damage modes such as matrix cracking, fiber-matrix shear, and fiber failure are modeled by degrading the material properties. Results from finite element analyses are compared with experimental data. Good agreement between experimental data and numerical results are observed for most structural configurations when initial geometric imperfections are appropriately modeled.

Progressive Failure Studies of Composite Panels With and Without Cutouts

NASA Technical Reports Server (NTRS)

Ambur, Damodar R.; Jaunky, Navin; Davila, Carlos G.; Hilburger, Mark

2001-01-01

Progressive failure analyses results are presented for composite panels with and without a cutout and are subjected to in-plane shear loading and compression loading well into their post-buckling regime. Ply damage modes such as matrix cracking, fiber-matrix shear, and fiber failure are modeled by degrading the material properties. Results from finite element analyses are compared with experimental data. Good agreement between experimental data and numerical results are observed for most structural configurations when initial geometric imperfections are appropriately modeled.

Multiscale Failure Analysis of Laminated Composite Panels Subjected to Blast Loading Using FEAMAC/Explicit

NASA Technical Reports Server (NTRS)

Pineda, Evan J.; Waas, Anthony M.; Berdnarcyk, Brett A.; Arnold, Steven M.; Collier, Craig S.

2009-01-01

This preliminary report demonstrates the capabilities of the recently developed software implementation that links the Generalized Method of Cells to explicit finite element analysis by extending a previous development which tied the generalized method of cells to implicit finite elements. The multiscale framework, which uses explicit finite elements at the global-scale and the generalized method of cells at the microscale is detailed. This implementation is suitable for both dynamic mechanics problems and static problems exhibiting drastic and sudden changes in material properties, which often encounter convergence issues with commercial implicit solvers. Progressive failure analysis of stiffened and un-stiffened fiber-reinforced laminates subjected to normal blast pressure loads was performed and is used to demonstrate the capabilities of this framework. The focus of this report is to document the development of the software implementation; thus, no comparison between the results of the models and experimental data is drawn. However, the validity of the results are assessed qualitatively through the observation of failure paths, stress contours, and the distribution of system energies.

Failing to Learn: Towards a Unified Design Approach for Failure-Based Learning

ERIC Educational Resources Information Center

Tawfik, Andrew A.; Rong, Hui; Choi, Ikseon

2015-01-01

To date, many instructional systems are designed to support learners as they progress through a problem-solving task. Often these systems are designed in accordance with instructional design models that progress the learner efficiently through the problem-solving process. However, theories from various fields have discussed failure as a strategic…

Difference in resource utilization between patients with acute and chronic heart failure from Japanese administrative database.

PubMed

Kuwabara, Kazuaki; Matsuda, Shinya; Anan, Makoto; Fushimi, Kiyohide; Ishikawa, Koichi B; Horiguchi, Hiromasa; Hayashida, Kenshi; Fujimori, Kenji

2010-06-11

Many studies have reported economic evaluation of evolving agents or therapies for patients with heart failure (HF). However, little is known whether the disease progression category (acute or chronic HF) would be considered as a risk adjustment in health service research. This study profiles the difference in resource use or medical care for acute versus chronic HF. This study analyzed 17,912 HF patients treated in 62 academic hospitals and 351 community hospitals. Study variables included demographic variables, comorbid status, physical activity or disease progression at admission, procedures and laboratory tests, type and dose of heart-related medications, length of stay (LOS), and total charges (TC; 1 US$= 100 yen) for acute and chronic HF. The independent contributions of disease progression categories on LOS and TC were identified using multivariate analysis. We identified 9813 chronic and 8099 acute HF patients. Median LOS was 18 days for both chronic and acute HF, whereas TC was US$5731 and US$6447, respectively. Regression analysis revealed that acute HF was associated with a slightly greater TC, whereas performance of procedures was the most prominent factor. As NYHA class was the next most influential factor, class 3 or 4 resulted in longer LOS or greater TC, than did class 1. This study suggests that acute HF increased resource use slightly, whereas use of some practices indicated in critical care was affected more by the procedures performed. Disease progression category should remain an indicator for appropriateness of medical care. Copyright (c) 2008 Elsevier Ireland Ltd. All rights reserved.

Attributions and Attitudes of Mothers and Fathers in Sweden.

PubMed

Sorbring, Emma; Gurdal, Sevtap

2011-07-01

OBJECTIVE: The present study examined mean level similarities and differences as well as correlations between mothers' and fathers' attributions regarding successes and failures in caregiving situations and progressive versus authoritarian attitudes. DESIGN: Interviews were conducted with both mothers and fathers in 77 Swedish families. RESULTS: Fathers reported higher adult-controlled failure and child-controlled failure attributions than did mothers; these differences remained significant after controlling for parents' age, education, and possible social desirability bias. Significant positive correlations were found for mothers' and fathers' progressive attitudes, authoritarian attitudes, and modernity of attitudes after controlling for parents' age, education, and possible social desirability bias. CONCLUSIONS: We conclude that in Sweden fathers are more likely to attribute failures in caregiving situations both to themselves and to children than are mothers and that there is moderate concordance between fathers and mothers within the same family in progressive and authoritarian parenting attitudes.

Structural Analysis of the Right Rear Lug of American Airlines Flight 587

NASA Technical Reports Server (NTRS)

Raju, Ivatury S.; Glaessgen, Edward H.; Mason, Brian H.; Krishnamurthy, Thiagarajan; Davila, Carlos G.

2006-01-01

A detailed finite element analysis of the right rear lug of the American Airlines Flight 587 - Airbus A300-600R was performed as part of the National Transportation Safety Board s failure investigation of the accident that occurred on November 12, 2001. The loads experienced by the right rear lug are evaluated using global models of the vertical tail, local models near the right rear lug, and a global-local analysis procedure. The right rear lug was analyzed using two modeling approaches. In the first approach, solid-shell type modeling is used, and in the second approach, layered-shell type modeling is used. The solid-shell and the layered-shell modeling approaches were used in progressive failure analyses (PFA) to determine the load, mode, and location of failure in the right rear lug under loading representative of an Airbus certification test conducted in 1985 (the 1985-certification test). Both analyses were in excellent agreement with each other on the predicted failure loads, failure mode, and location of failure. The solid-shell type modeling was then used to analyze both a subcomponent test conducted by Airbus in 2003 (the 2003-subcomponent test) and the accident condition. Excellent agreement was observed between the analyses and the observed failures in both cases. The moment, Mx (moment about the fuselage longitudinal axis), has significant effect on the failure load of the lugs. Higher absolute values of Mx give lower failure loads. The predicted load, mode, and location of the failure of the 1985- certification test, 2003-subcomponent test, and the accident condition are in very good agreement. This agreement suggests that the 1985-certification and 2003-subcomponent tests represent the accident condition accurately. The failure mode of the right rear lug for the 1985-certification test, 2003-subcomponent test, and the accident load case is identified as a cleavage-type failure. For the accident case, the predicted failure load for the right rear lug from the PFA is greater than 1.98 times the limit load of the lugs.

Investigating the Evolution of Progressive Die Wear on Uncoated Dp1180 Steel in Production Environment

NASA Astrophysics Data System (ADS)

Wu, W.; Zhou, D. J.; Adamski, D. J.; Young, D.; Wang, Y. W.

2017-09-01

A study of die wear was performed using an uncoated dual phase, 1,180 MPa ultimate tensile strength steel (DP1180) in a progressive die. The objectives of the current study are to evaluate the die durability of various tooling materials and coatings for forming operations on uncoated DP1180 steel and update OEM’s die standards based on the experimental results in the real production environment. In total, 100,800 hits were performed in manufacturing production conditions, where 33 die inserts with the combination of 10 die materials and 9 coatings were investigated. The die inserts were evaluated for surface wear using scanning electron microscopy and characterized in terms of die material and/or coating defects, failure mode, failure initiation and propagation. Surface roughness of the formed parts was characterized using a WYKO NT110 machine. The analytical analysis of the die inserts and formed parts, combined with the failure mode and service life, provide a basis for die material and coating selection for forming AHSS components. The conclusions of this study will guide the selection of die material and coatings for high-volume production of AHSS components.

A new mitochondrial point mutation in the transfer RNA(Lys) gene associated with progressive external ophthalmoplegia with impaired respiratory regulation.

PubMed

Wolf, Joachim; Obermaier-Kusser, Bert; Jacobs, Martina; Milles, Cornelia; Mörl, Mario; von Pein, Harald D; Grau, Armin J; Bauer, Matthias F

2012-05-15

We report a novel heteroplasmic point mutation G8299A in the gene for mitochondrial tRNA(Lys) in a patient with progressive external ophthalmoplegia complicated by recurrent respiratory insufficiency. Biochemical analysis of respiratory chain complexes in muscle homogenate showed a combined complex I and IV deficiency. The transition does not represent a known neutral polymorphism and affects a position in the tRNA acceptor stem which is conserved in primates, leading to a destabilization of this functionally important domain. In vitro analysis of an essential maturation step of the tRNA transcript indicates the probable pathogenicity of this mutation. We hypothesize that there is a causal relationship between the novel G8299A transition and progressive external ophthalmoplegia with recurrent respiratory failure due to a depressed respiratory drive. Copyright © 2012 Elsevier B.V. All rights reserved.

[CHRONIC RENAL FAILURE AND PREGNANCY--A CASE REPORT].

PubMed

Amaliev, G M; Uchikova, E; Malinova, M

2015-01-01

Pregnancy in women with chronic renal failure is a complex therapeutic problem requiring a multidisciplinary approach. It is associated with a higher risk of many perinatal complications. The most common abnormalities are related to: progression of renal failure, development of preeclampsia development of nephrotic syndrome, anemic syndrome, IUGR and fetal death. The prognosis depends on the values of serum creatinine prior to pregnancy, the degree of deterioration of renal function, development of additional obstetric complications and the specific etiological reasons that have led to the occurrence of renal failure. Determining the optimum time for authorization birth depends on the condition of the mother, the condition of the fetus and the rate of progression of renal failure, and the deadline the pregnancy should be terminated is 35 weeks. We present a case of a patient with chronic renal failure, with favorable perinatal outcome.

Neonatal Marfan syndrome: Report of two cases.

PubMed

Jurko, Tomas; Jurko, Alexander; Minarik, Milan; Micieta, Vladimir; Tonhajzerova, Ingrid; Kolarovszka, Hana; Zibolen, Mirko

2017-07-01

Marfan syndrome is rarely diagnosed in the neonatal period because of variable expression and age-dependent appearance of clinical signs. The prognosis is usually poor due to high probability of congestive heart failure, mitral and tricuspid regurgitations with suboptimal response to medical therapy and difficulties in surgical management. The authors have studied two cases of Marfan syndrome in the newborn period. Two cases of neonatal Marfan syndrome, one male and one female, were diagnosed by characteristic physical appearance. Both infants had significant cardiovascular abnormalities diagnosed by ultrasonography. Genetic DNA analysis in the second case confirmed the mutations in the fibrillin-1 gene located on chromosome 15q21 which is responsible for the development of Marfan syndrome. The boy died at six weeks of age with signs of rapidly progressive left ventricular failure associated with pneumonia. The second infant was having only mild signs of congestive heart failure and has been treated with beta blockers. At the age of 4 years her symptoms of congestive heart failure had worsened due to progression of mitral and tricuspid insufficiency and development of significant cardiomegaly. Mitral and tricuspid valvuloplasy had to be done at that time. Early diagnosis of Marfan syndrome in the newborn period can allow treatment in the early stages of cardiovascular abnormalities and may improve the prognosis. It also helps to explain to the family the serious health problem of their child.

Analysis of Patients With Oligometastases Undergoing Two or More Curative-Intent Stereotactic Radiotherapy Courses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Milano, Michael T.; Philip, Abraham; Okunieff, Paul

2009-03-01

Purpose: A subset of patients treated with curative-intent stereotactic radiotherapy (RT) for limited metastases (defined as five lesions or fewer) develop local failure and/or a small number of new lesions. We hypothesized that these patients would remain amenable to curative-intent treatment with additional RT courses. Methods and Materials: Of 121 prospective patients with five lesions or fewer treated with stereotactic RT, 32 underwent additional RT courses for local failure (n = 9) and/or new lesions (n = 29). Ten patients underwent three or more courses of RT. Results: The treated local failures developed a median of 20 months after RTmore » completion. For the new oligometastases, the interval between the first and second RT course was 1-71 months (median, 8). Of the 32 patients undergoing multiple courses of curative-intent RT, the 2-year overall survival and progression-free survival rate was 65% and 54%, respectively. The corresponding 4-year rates were 33% and 28%. Compared with the 89 patients who underwent one RT course, these patients experienced a trend toward improved overall survival (median, 32 vs. 21 months, p = 0.13) and significantly greater progression-free survival (median, 28 vs. 9 months, p = 0.008). Conclusion: The results of our study have shown that patients fare well with respect to survival and disease control with aggressive RT for limited metastases, even after local failure and/or the development of new metastases. Although patients amenable to multiple courses of curative-intent RT are arguably selected for more indolent disease, our hypothesis-generating analysis supports the notion of aggressively treating limited metastases, which, in some patients, might be curable and/or represent a chronic disease state.« less

Stage Separation Failure: Model Based Diagnostics and Prognostics

NASA Technical Reports Server (NTRS)

Luchinsky, Dmitry; Hafiychuk, Vasyl; Kulikov, Igor; Smelyanskiy, Vadim; Patterson-Hine, Ann; Hanson, John; Hill, Ashley

2010-01-01

Safety of the next-generation space flight vehicles requires development of an in-flight Failure Detection and Prognostic (FD&P) system. Development of such system is challenging task that involves analysis of many hard hitting engineering problems across the board. In this paper we report progress in the development of FD&P for the re-contact fault between upper stage nozzle and the inter-stage caused by the first stage and upper stage separation failure. A high-fidelity models and analytical estimations are applied to analyze the following sequence of events: (i) structural dynamics of the nozzle extension during the impact; (ii) structural stability of the deformed nozzle in the presence of the pressure and temperature loads induced by the hot gas flow during engine start up; and (iii) the fault induced thrust changes in the steady burning regime. The diagnostic is based on the measurements of the impact torque. The prognostic is based on the analysis of the correlation between the actuator signal and fault-induced changes in the nozzle structural stability and thrust.

Modelling of Damage Evolution in Braided Composites: Recent Developments

NASA Astrophysics Data System (ADS)

Wang, Chen; Roy, Anish; Silberschmidt, Vadim V.; Chen, Zhong

2017-12-01

Composites reinforced with woven or braided textiles exhibit high structural stability and excellent damage tolerance thanks to yarn interlacing. With their high stiffness-to-weight and strength-to-weight ratios, braided composites are attractive for aerospace and automotive components as well as sports protective equipment. In these potential applications, components are typically subjected to multi-directional static, impact and fatigue loadings. To enhance material analysis and design for such applications, understanding mechanical behaviour of braided composites and development of predictive capabilities becomes crucial. Significant progress has been made in recent years in development of new modelling techniques allowing elucidation of static and dynamic responses of braided composites. However, because of their unique interlacing geometric structure and complicated failure modes, prediction of damage initiation and its evolution in components is still a challenge. Therefore, a comprehensive literature analysis is presented in this work focused on a review of the state-of-the-art progressive damage analysis of braided composites with finite-element simulations. Recently models employed in the studies on mechanical behaviour, impact response and fatigue analyses of braided composites are presented systematically. This review highlights the importance, advantages and limitations of as-applied failure criteria and damage evolution laws for yarns and composite unit cells. In addition, this work provides a good reference for future research on FE simulations of braided composites.

Efficient selective screening for heart failure in elderly men and women from the community: A diagnostic individual participant data meta-analysis

PubMed Central

Kievit, Rogier F; Hoes, Arno W; Bots, Michiel L; van Riet, Evelien ES; van Mourik, Yvonne; Bertens, Loes CM; Boonman-de Winter, Leandra JM; den Ruijter, Hester M; Rutten, Frans H

2018-01-01

Background Prevalence of undetected heart failure in older individuals is high in the community, with patients being at increased risk of morbidity and mortality due to the chronic and progressive nature of this complex syndrome. An essential, yet currently unavailable, strategy to pre-select candidates eligible for echocardiography to confirm or exclude heart failure would identify patients earlier, enable targeted interventions and prevent disease progression. The aim of this study was therefore to develop and validate such a model that can be implemented clinically. Methods and results Individual patient data from four primary care screening studies were analysed. From 1941 participants >60 years old, 462 were diagnosed with heart failure, according to criteria of the European Society of Cardiology heart failure guidelines. Prediction models were developed in each cohort followed by cross-validation, omitting each of the four cohorts in turn. The model consisted of five independent predictors; age, history of ischaemic heart disease, exercise-related shortness of breath, body mass index and a laterally displaced/broadened apex beat, with no significant interaction with sex. The c-statistic ranged from 0.70 (95% confidence interval (CI) 0.64–0.76) to 0.82 (95% CI 0.78–0.87) at cross-validation and the calibration was reasonable with Observed/Expected ratios ranging from 0.86 to 1.15. The clinical model improved with the addition of N-terminal pro B-type natriuretic peptide with the c-statistic increasing from 0.76 (95% CI 0.70–0.81) to 0.89 (95% CI 0.86–0.92) at cross-validation. Conclusion Easily obtainable patient characteristics can select older men and women from the community who are candidates for echocardiography to confirm or refute heart failure. PMID:29327942

Efficient selective screening for heart failure in elderly men and women from the community: A diagnostic individual participant data meta-analysis.

PubMed

Kievit, Rogier F; Gohar, Aisha; Hoes, Arno W; Bots, Michiel L; van Riet, Evelien Es; van Mourik, Yvonne; Bertens, Loes Cm; Boonman-de Winter, Leandra Jm; den Ruijter, Hester M; Rutten, Frans H

2018-03-01

Background Prevalence of undetected heart failure in older individuals is high in the community, with patients being at increased risk of morbidity and mortality due to the chronic and progressive nature of this complex syndrome. An essential, yet currently unavailable, strategy to pre-select candidates eligible for echocardiography to confirm or exclude heart failure would identify patients earlier, enable targeted interventions and prevent disease progression. The aim of this study was therefore to develop and validate such a model that can be implemented clinically. Methods and results Individual patient data from four primary care screening studies were analysed. From 1941 participants >60 years old, 462 were diagnosed with heart failure, according to criteria of the European Society of Cardiology heart failure guidelines. Prediction models were developed in each cohort followed by cross-validation, omitting each of the four cohorts in turn. The model consisted of five independent predictors; age, history of ischaemic heart disease, exercise-related shortness of breath, body mass index and a laterally displaced/broadened apex beat, with no significant interaction with sex. The c-statistic ranged from 0.70 (95% confidence interval (CI) 0.64-0.76) to 0.82 (95% CI 0.78-0.87) at cross-validation and the calibration was reasonable with Observed/Expected ratios ranging from 0.86 to 1.15. The clinical model improved with the addition of N-terminal pro B-type natriuretic peptide with the c-statistic increasing from 0.76 (95% CI 0.70-0.81) to 0.89 (95% CI 0.86-0.92) at cross-validation. Conclusion Easily obtainable patient characteristics can select older men and women from the community who are candidates for echocardiography to confirm or refute heart failure.

Full-length genome characterization and genetic relatedness analysis of hepatitis A virus outbreak strains associated with acute liver failure among children.

PubMed

Vaughan, Gilberto; Forbi, Joseph C; Xia, Guo-Liang; Fonseca-Ford, Maureen; Vazquez, Roberto; Khudyakov, Yury E; Montiel, Sonia; Waterman, Steve; Alpuche, Celia; Gonçalves Rossi, Livia Maria; Luna, Norma

2014-02-01

Clinical infection by hepatitis A virus (HAV) is generally self-limited but in some cases can progress to liver failure. Here, an HAV outbreak investigation among children with acute liver failure in a highly endemic country is presented. In addition, a sensitive method for HAV whole genome amplification and sequencing suitable for analysis of clinical samples is described. In this setting, two fatal cases attributed to acute liver failure and two asymptomatic cases living in the same household were identified. In a second household, one HAV case was observed with jaundice which resolved spontaneously. Partial molecular characterization showed that both households were infected by HAV subtype IA; however, the infecting strains in the two households were different. The HAV outbreak strains recovered from all cases grouped together within cluster IA1, which contains closely related HAV strains from the United States commonly associated with international travelers. Full-genome HAV sequences obtained from the household with the acute liver failure cases were related (genetic distances ranging from 0.01% to 0.04%), indicating a common-source infection. Interestingly, the strain recovered from the asymptomatic household contact was nearly identical to the strain causing acute liver failure. The whole genome sequence from the case in the second household was distinctly different from the strains associated with acute liver failure. Thus, infection with almost identical HAV strains resulted in drastically different clinical outcomes. © 2013 Wiley Periodicals, Inc.

Observational longitudinal cohort study to determine progression to heart failure in a screened community population: the Echocardiographic Heart of England Screening Extension (ECHOES-X) study

PubMed Central

Taylor, Clare J; Roalfe, Andrea K; Tait, Lynda; Davis, Russell C; Iles, Rachel; Derit, Marites; Hobbs, F D Richard

2014-01-01

Objectives Rescreen a large community cohort to examine the progression to heart failure over time and the role of natriuretic peptide testing in screening. Design Observational longitudinal cohort study. Setting 16 socioeconomically diverse practices in central England. Participants Participants from the original Echocardiographic Heart of England Screening (ECHOES) study were invited to attend for rescreening. Outcome measures Prevalence of heart failure at rescreening overall and for each original ECHOES subgroup. Test performance of N Terminal pro-B-type Natriuretic Peptide (NT-proBNP) levels at different thresholds for screening. Results 1618 of 3408 participants underwent screening which represented 47% of survivors and 26% of the original ECHOES cohort. A total of 176 (11%, 95% CI 9.4% to 12.5%) participants were classified as having heart failure at rescreening; 103 had heart failure with reduced ejection fraction (HFREF) and 73 had heart failure with preserved ejection fraction (HFPEF). Sixty-eight out of 1232 (5.5%, 95% CI 4.3% to 6.9%) participants who were recruited from the general population over the age of 45 and did not have heart failure in the original study, had heart failure on rescreening. An NT-proBNP cut-off of 400 pg/mL had sensitivity for a diagnosis of heart failure of 79.5% (95% CI 72.4% to 85.5%) and specificity of 87% (95% CI 85.1% to 88.8%). Conclusions Rescreening identified new cases of HFREF and HFPEF. Progression to heart failure poses a significant threat over time. The natriuretic peptide cut-off level for ruling out heart failure must be low enough to ensure cases are not missed at screening. PMID:25015472

Experimental micromechanical approach to failure process in CFRP cross-ply laminates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takeda, N.; Ogihara, S.; Kobayashi, A.

The microscopic failure process of three different types of cross-ply laminates, (0/90{sub n}/0) (n = 4, 8, 12), was investigated at R.T. and 80 C. Progressive damage parameters, the transverse crack density and the delamination ratio, were measured. A simple modified shear-lag analysis including the thermal residual strains was conducted to predict the transverse crack density as a function of laminate strain, considering the constraint effect, as well as the strength distribution of the transverse layer. The analysis was also extended to the system containing delamination to predict the delamination length. A prediction was also presented for the transverse crackmore » density including the effect of the delamination growth. The prediction showed good agreement with the experimental results.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Chao; Xu, Jun; Cao, Lei

The electrodes of lithium-ion batteries (LIB) are known to be brittle and to fail earlier than the separators during an external crush event. Thus, the understanding of mechanical failure mechanism for LIB electrodes (anode and cathode) is critical for the safety design of LIB cells. In this paper, we present experimental and numerical studies on the constitutive behavior and progression of failure in LIB electrodes. Mechanical tests were designed and conducted to evaluate the constitutive properties of porous electrodes. Constitutive models were developed to describe the stress-strain response of electrodes under uniaxial tensile and compressive loads. The failure criterion andmore » a damage model were introduced to model their unique tensile and compressive failure behavior. The failure mechanism of LIB electrodes was studied using the blunt rod test on dry electrodes, and numerical models were built to simulate progressive failure. The different failure processes were examined and analyzed in detail numerically, and correlated with experimentally observed failure phenomena. Finally, the test results and models improve our understanding of failure behavior in LIB electrodes, and provide constructive insights on future development of physics-based safety design tools for battery structures under mechanical abuse.« less

XPS analysis of Al/EPDM bondlines from IUS SRM-1 polar bosses

NASA Astrophysics Data System (ADS)

Hemminger, Carol S.; Marquez, Nicholas

1993-03-01

A temperature-stress rupture method using partial immersion in liquid nitrogen was developed for the aluminum/EPDM rubber insulation bondline of the IUS SRM-1 polar bosses in order to investigate a corrosion problem. Subsequent XPS analysis of the ruptured bondline followed changes in the locus of failure as corrosion progressed. Samples from the forward polar bosses had a predominantly noncorroded appearance on the ruptured surfaces. The locus of failure was predominantly through the primer layer, which is distinguished by a high concentration of chlorinated hydrocarbon. The aft polar boss segments analyzed were characterized by the presence of corrosion over the entire mid-section of the ruptured aluminum to insulation bondline. The predominant corrosion product detected was aluminum oxide/hydroxide. The corroded bondline sections had significantly higher concentrations of aluminum oxide/hydroxide than the noncorroded areas, and lower concentrations of primer material. The temperature-stress rupture appeared to progress most readily through areas of thickened aluminum oxide/hydroxide infiltrated into the primer layer. In general there was a very good correlation between the calculated Cl:Al atomic % ratio, and the visual characterization of the extent of corrosion. The Cl:Al ratio, which represents the primer to corrosion product ratio at the locus of failure, varied from 0.4 to 47. With only a few exceptions, surfaces with a predominantly noncorroded appearance had Cl:Al ratios greater than 2, and surfaces with a heavily corroded appearance had Cl:Al ratios less than 1.

Progressive Damage Analysis of Laminated Composite (PDALC) (A Computational Model Implemented in the NASA COMET Finite Element Code). 2.0

NASA Technical Reports Server (NTRS)

Coats, Timothy W.; Harris, Charles E.; Lo, David C.; Allen, David H.

1998-01-01

A method for analysis of progressive failure in the Computational Structural Mechanics Testbed is presented in this report. The relationship employed in this analysis describes the matrix crack damage and fiber fracture via kinematics-based volume-averaged damage variables. Damage accumulation during monotonic and cyclic loads is predicted by damage evolution laws for tensile load conditions. The implementation of this damage model required the development of two testbed processors. While this report concentrates on the theory and usage of these processors, a complete listing of all testbed processors and inputs that are required for this analysis are included. Sample calculations for laminates subjected to monotonic and cyclic loads were performed to illustrate the damage accumulation, stress redistribution, and changes to the global response that occurs during the loading history. Residual strength predictions made with this information compared favorably with experimental measurements.

Progressive Damage Analysis of Laminated Composite (PDALC)-A Computational Model Implemented in the NASA COMET Finite Element Code

NASA Technical Reports Server (NTRS)

Lo, David C.; Coats, Timothy W.; Harris, Charles E.; Allen, David H.

1996-01-01

A method for analysis of progressive failure in the Computational Structural Mechanics Testbed is presented in this report. The relationship employed in this analysis describes the matrix crack damage and fiber fracture via kinematics-based volume-averaged variables. Damage accumulation during monotonic and cyclic loads is predicted by damage evolution laws for tensile load conditions. The implementation of this damage model required the development of two testbed processors. While this report concentrates on the theory and usage of these processors, a complete list of all testbed processors and inputs that are required for this analysis are included. Sample calculations for laminates subjected to monotonic and cyclic loads were performed to illustrate the damage accumulation, stress redistribution, and changes to the global response that occur during the load history. Residual strength predictions made with this information compared favorably with experimental measurements.

Prospects and Pitfalls: A Review of Post-Apartheid Education Policy Research and Analysis in South Africa

ERIC Educational Resources Information Center

Spreen, Carol Anne; Vally, Salim

2010-01-01

The 10-year anniversary of the first democratic elections in South Africa in 2004 provoked much reflection and fuelled new policy debates on both the progress and failures of educational reform. While a myriad of achievements have been touted and are well-known to international audiences, a swelling critique from inside South Africa shows that…

Multidisciplinary research leading to utilization of extraterrestrial resources

NASA Technical Reports Server (NTRS)

1972-01-01

Progress of the research accomplished during fiscal year 1972 is reported. The summaries presented include: (1) background analysis and coordination, (2) surface properties of rock in simulated lunar environment, (3) rock failure processes, strength and elastic properties in simulated lunar environment, (4) thermal fragmentation, and thermophysical and optical properties in simulated lunar environment, and (5) use of explosives on the moon.

Analytical Prediction of Damage Growth in Notched Composite Panels Loaded in Axial Compression

NASA Technical Reports Server (NTRS)

Ambur, Damodar R.; McGowan, David M.; Davila, Carlos G.

1999-01-01

A progressive failure analysis method based on shell elements is developed for the computation of damage initiation and growth in stiffened thick-skin stitched graphite-epoxy panels loaded in axial compression. The analysis method involves a step-by-step simulation of material degradation based on ply-level failure mechanisms. High computational efficiency is derived from the use of superposed layers of shell elements to model each ply orientation in the laminate. Multiple integration points through the thickness are used to obtain the correct bending effects through the thickness without the need for ply-by-ply evaluations of the state of the material. The analysis results are compared with experimental results for three stiffened panels with notches oriented at 0, 15 and 30 degrees to the panel width dimension. A parametric study is performed to investigate the damage growth retardation characteristics of the Kevlar stitch lines in the pan

Damage Progression in Buckle-Resistant Notched Composite Plates Loaded in Uniaxial Compression

NASA Technical Reports Server (NTRS)

McGowan, David M.; Davila, Carlos G.; Ambur, Damodar R.

2001-01-01

Results of an experimental and analytical evaluation of damage progression in three stitched composite plates containing an angled central notch and subjected to compression loading are presented. Parametric studies were conducted systematically to identify the relative effects of the material strength parameters on damage initiation and growth. Comparisons with experiments were conducted to determine the appropriate in situ values of strengths for progressive failure analysis. These parametric studies indicated that the in situ value of the fiber buckling strength is the most important parameter in the prediction of damage initiation and growth in these notched composite plates. Analyses of the damage progression in the notched, compression-loaded plates were conducted using in situ material strengths. Comparisons of results obtained from these analyses with experimental results for displacements and axial strains show good agreement.

Tailoring therapy for ischemic cardiomyopathy: is Laplace's law enough?

PubMed

Adhyapak, Srilakshmi M; Parachuri, V Rao

2017-09-01

The burden of heart failure has long plagued the productive years of the population, with therapeutic advances in the timely treatment of ischemic heart disease decreasing its associated mortality. Angiotensin-converting enzyme inhibitors and β-blockers have impacted heart failure therapeutics in a revolutionary way. The importance of blockade of the renin-angiotensin system and adrenergic stimulation are fully accepted concepts that apply in young and old, symptomatic and asymptomatic, borderline low and very low Ejection Fraction (EF), left ventricular failure and biventricular failure. Despite several interventions, both pharmaceutical and device based for the treatment of ensuing heart failure, the incidence is increasing in large proportions. Newer molecules like sacubitril show more promise. Despite these novel therapies, several patients relentlessly progress to a stage of advanced heart failure. The use of left-ventricular-assist devices has variable clinical benefit, with some patients progressing to heart transplantation.

Premature ovarian failure, short stature, and Hashimoto's disease in an 18-year-old adolescent girl with 46, X, i(X)(q10).

PubMed

Hu, Xiang; Zhang, Qiao; Gao, Feng; Chen, Lu-Lu

2018-04-22

Premature ovarian failure (POF) is a heterogeneous condition affecting girls and women. We detected a previously healthy 18-year-old adolescent girl, presented with amenorrhea over six months, as well as circulating levels of estradiol lower decreased and follicle-stimulating hormone (FSH) increased. She was 138 cm tall. Results of laboratory tests and/or ultrasound investigations showed 46, X, i(X)(q10) karyotype and Hashimoto's disease. This case suggests that pubertal onset and progression, as well as karyotype analysis, should be evaluated in girls with Hashimoto's disease and short stature.

Modelling Coastal Cliff Recession Based on the GIM-DDD Method

NASA Astrophysics Data System (ADS)

Gong, Bin; Wang, Shanyong; Sloan, Scott William; Sheng, Daichao; Tang, Chun'an

2018-04-01

The unpredictable and instantaneous collapse behaviour of coastal rocky cliffs may cause damage that extends significantly beyond the area of failure. Gravitational movements that occur during coastal cliff recession involve two major stages: the small deformation stage and the large displacement stage. In this paper, a method of simulating the entire progressive failure process of coastal rocky cliffs is developed based on the gravity increase method (GIM), the rock failure process analysis method and the discontinuous deformation analysis method, and it is referred to as the GIM-DDD method. The small deformation stage, which includes crack initiation, propagation and coalescence processes, and the large displacement stage, which includes block translation and rotation processes during the rocky cliff collapse, are modelled using the GIM-DDD method. In addition, acoustic emissions, stress field variations, crack propagation and failure mode characteristics are further analysed to provide insights that can be used to predict, prevent and minimize potential economic losses and casualties. The calculation and analytical results are consistent with previous studies, which indicate that the developed method provides an effective and reliable approach for performing rocky cliff stability evaluations and coastal cliff recession analyses and has considerable potential for improving the safety and protection of seaside cliff areas.

The role of tectonic damage and brittle rock fracture in the development of large rock slope failures

NASA Astrophysics Data System (ADS)

Brideau, Marc-André; Yan, Ming; Stead, Doug

2009-01-01

Rock slope failures are frequently controlled by a complex combination of discontinuities that facilitate kinematic release. These discontinuities are often associated with discrete folds, faults, and shear zones, and/or related tectonic damage. The authors, through detailed case studies, illustrate the importance of considering the influence of tectonic structures not only on three-dimensional kinematic release but also in the reduction of rock mass properties due to induced damage. The case studies selected reflect a wide range of rock mass conditions. In addition to active rock slope failures they include two major historic failures, the Hope Slide, which occurred in British Columbia in 1965 and the Randa rockslides which occurred in Switzerland in 1991. Detailed engineering geological mapping combined with rock testing, GIS data analysis and for selected case numerical modelling, have shown that specific rock slope failure mechanisms may be conveniently related to rock mass classifications such as the Geological Strength Index (GSI). The importance of brittle intact rock fracture in association with pre-existing rock mass damage is emphasized though a consideration of the processes involved in the progressive-time dependent development not only of though-going failure surfaces but also lateral and rear-release mechanisms. Preliminary modelling data are presented to illustrate the importance of intact rock fracture and step-path failure mechanisms; and the results are discussed with reference to selected field observations. The authors emphasize the importance of considering all forms of pre-existing rock mass damage when assessing potential or operative failure mechanisms. It is suggested that a rock slope rock mass damage assessment can provide an improved understanding of the potential failure mode, the likely hazard presented, and appropriate methods of both analysis and remedial treatment.

Study of the Progressive Failure of Composites under Axial Loading with Varying Strain Rates

DTIC Science & Technology

2011-12-01

8 a. Waddoups, Eisenmann , and Kaminski Failure Theory ..........8 b. Whitney-Nuismer Failure Theory ..........................................11...Width (m) WEK Waddoups, Eisenmann , and Kaminski failure theory xiv x Coordinate measured from center of notch perpendicular to direction of...comprised of differing assumptions, effort, and knowledge of material properties. a. Waddoups, Eisenmann , and Kaminski Failure Theory One of the

ATWS at Browns Ferry Unit One - accident sequence analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrington, R.M.; Hodge, S.A.

1984-07-01

This study describes the predicted response of Unit One at the Browns Ferry Nuclear Plant to a postulated complete failure to scram following a transient occurrence that has caused closure of all Main Steam Isolation Valves (MSIVs). This hypothetical event constitutes the most severe example of the type of accident classified as Anticipated Transient Without Scram (ATWS). Without the automatic control rod insertion provided by scram, the void coefficient of reactivity and the mechanisms by which voids are formed in the moderator/coolant play a dominant role in the progression of the accident. Actions taken by the operator greatly influence themore » quantity of voids in the coolant and the effect is analyzed in this report. The progression of the accident sequence under existing and under recommended procedures is discussed. For the extremely unlikely cases in which equipment failure and wrongful operator actions might lead to severe core damage, the sequence of emergency action levels and the associated timing of events are presented.« less

Proceedings of the 22nd Project Integration Meeting

NASA Technical Reports Server (NTRS)

1983-01-01

This report describes progress made by the Flat-Plate Solar Array Project during the period January to September 1983. It includes reports on silicon sheet growth and characterization, module technology, silicon material, cell processing and high-efficiency cells, environmental isolation, engineering sciences, module performance and failure analysis and project analysis and integration. It includes a report on, and copies of visual presentations made at the 22nd Project Integration Meeting held at Pasadena, California, on September 28 and 29, 1983.

Eyes on the prize or nose to the grindstone? The effects of level of goal evaluation on mood and motivation.

PubMed

Houser-Marko, Linda; Sheldon, Kennon M

2008-11-01

These studies tested the hypothesis that evaluating goal feedback in terms of a primary, longer term goal can be risky for future motivation. Study 1 was a 2 x 2 experiment in which framing level (primary goal/subgoal) and feedback valence (success/failure) were manipulated for participants during a verbal skills task. In the primary goal failure condition, there was increased negative mood and decreased positive mood and expectancy for subsequent trials, even while controlling for goal difficulty and importance. Study 2 was an 8-week study throughout which participants were asked to evaluate their progress regarding a primary goal (class grade goal) or subgoal (weekly study hours goal), and success or failure varied naturally. When progress was lacking, participants in the primary goal condition experienced the largest decreases in mood and expectancy. These results suggest that it is optimal to evaluate goal progress at the lower, subgoal level, particularly after failure feedback.

[Scarlet fever with multisystem organ failure and hypertrophic gastritis].

PubMed

Sandrini, J; Beucher, A-B; Kouatchet, A; Lavigne, C

2009-05-01

Scarlet fever is a rare disease in adult patients. We report a patient in whom scarlet fever was associated with hypertrophic gastritis and multiple organ failure. A 62-year-old woman presented with septic shock and multiple organ failure. Bacteriological survey was negative. Abdominal tomodensitometry showed an hypertrophic gastritis. Histological analysis demonstrated a non specific gastritis without any tumoral sign. Cefotaxime and amoxicillin led to improvement and hypertrophic gastritis progressively resolved. A sandpaper rash over the body with finger desquamation, elevation of antistreptolysin O and a recent contact with an infected grandson led to the diagnosis of scarlet fever. Due to antibiotic prescription, scarlet fever is now uncommon. Although classical, ENT or gastroenteritis presentations may be puzzling for the diagnosis of scarlet fever. As 150 years ago, diagnosis of scarlet fever is still a clinical challenge.

Cardiac myofibrillar contractile properties during the progression from hypertension to decompensated heart failure.

PubMed

Hanft, Laurin M; Emter, Craig A; McDonald, Kerry S

2017-07-01

Heart failure arises, in part, from a constellation of changes in cardiac myocytes including remodeling, energetics, Ca 2+ handling, and myofibrillar function. However, little is known about the changes in myofibrillar contractile properties during the progression from hypertension to decompensated heart failure. The aim of the present study was to provide a comprehensive assessment of myofibrillar functional properties from health to heart disease. A rodent model of uncontrolled hypertension was used to test the hypothesis that myocytes in compensated hearts exhibit increased force, higher rates of force development, faster loaded shortening, and greater power output; however, with progression to overt heart failure, we predicted marked depression in these contractile properties. We assessed contractile properties in skinned cardiac myocyte preparations from left ventricles of Wistar-Kyoto control rats and spontaneous hypertensive heart failure (SHHF) rats at ~3, ~12, and >20 mo of age to evaluate the time course of myofilament properties associated with normal aging processes compared with myofilaments from rats with a predisposition to heart failure. In control rats, the myofilament contractile properties were virtually unchanged throughout the aging process. Conversely, in SHHF rats, the rate of force development, loaded shortening velocity, and power all increased at ~12 mo and then significantly fell at the >20-mo time point, which coincided with a decrease in left ventricular fractional shortening. Furthermore, these changes occurred independent of changes in β-myosin heavy chain but were associated with depressed phosphorylation of myofibrillar proteins, and the fall in loaded shortening and peak power output corresponded with the onset of clinical signs of heart failure. NEW & NOTEWORTHY This novel study systematically examined the power-generating capacity of cardiac myofilaments during the progression from hypertension to heart disease. Previously undiscovered changes in myofibrillar power output were found and were associated with alterations in myofilament proteins, providing potential new targets to exploit for improved ventricular pump function in heart failure. Copyright © 2017 the American Physiological Society.

miR-21 is associated with fibrosis and right ventricular failure

PubMed Central

Hu, Dong-Qing; Zhao, Mingming; Blay, Eddie; Sandeep, Nefthi; Ong, Sang-Ging; Jung, Gwanghyun; Kooiker, Kristina B.; Coronado, Michael; Fajardo, Giovanni; Bernstein, Daniel

2017-01-01

Combined pulmonary insufficiency (PI) and stenosis (PS) is a common long-term sequela after repair of many forms of congenital heart disease, causing progressive right ventricular (RV) dilation and failure. Little is known of the mechanisms underlying this combination of preload and afterload stressors. We developed a murine model of PI and PS (PI+PS) to identify clinically relevant pathways and biomarkers of disease progression. Diastolic dysfunction was induced (restrictive RV filling, elevated RV end-diastolic pressures) at 1 month after generation of PI+PS and progressed to systolic dysfunction (decreased RV shortening) by 3 months. RV fibrosis progressed from 1 month (4.4% ± 0.4%) to 3 months (9.2% ± 1%), along with TGF-β signaling and tissue expression of profibrotic miR-21. Although plasma miR-21 was upregulated with diastolic dysfunction, it was downregulated with the onset of systolic dysfunction), correlating with RV fibrosis. Plasma miR-21 in children with PI+PS followed a similar pattern. A model of combined RV volume and pressure overload recapitulates the evolution of RV failure unique to patients with prior RV outflow tract surgery. This progression was characterized by enhanced TGF-β and miR-21 signaling. miR-21 may serve as a plasma biomarker of RV failure, with decreased expression heralding the need for valve replacement. PMID:28469078

Experimental and theoretical investigation of fatigue life in reusable rocket thrust chambers

NASA Technical Reports Server (NTRS)

Hannum, N. P.; Kasper, H. J.; Pavli, A. J.

1976-01-01

During a test program to investigate low-cycle thermal fatigue, 13 rocket combustion chambers were fabricated and cyclically test fired to failure. Six oxygen-free, high-conductivity (OFHC) copper and seven Amzirc chambers were tested. The chamber liners were fabricated of copper or copper alloy and contained milled coolant channels. The chambers were completed by means of an electroformed nickel closeout. The oxidant/fuel ratio for the liquid oxygen and gaseous hydrogen propellants was 6.0. The failures in the OFHC copper chambers were not typical fatigue failures but are described as creep rupture enhanced by ratcheting. The coolant channels bulged toward the chamber centerline, resulting in progressive thinning of the wall during each cycle. The failures in the Amzirc alloy chambers were caused by low-cycle thermal fatigue. The lives were much shorter than were predicted by an analytical structural analysis computer program used in conjunction with fatigue life data from isothermal test specimens, due to the uneven distribution of Zr in the chamber material.

Bone Marrow Failure Secondary to Cytokinesis Failure

DTIC Science & Technology

2015-12-01

SUPPLEMENTARY NOTES 14. ABSTRACT Fanconi anemia (FA) is a human genetic disease characterized by a progressive bone marrow failure and heightened...Fanconi anemia (FA) is the most commonly inherited bone marrow failure syndrome. FA patients develop bone marrow failure during the first decade of...experiments proposed in specific aims 1- 3 (Tasks 1-3). Task 1: To determine whether HSCs from Fanconi anemia mouse models have increased cytokinesis

Multi-Scale Hierarchical and Topological Design of Structures for Failure Resistance

DTIC Science & Technology

2013-10-04

materials, simulation, 3D printing , advanced manufacturing, design, fracture Markus J. Buehler Massachusetts Institute of Technology (MIT) 77...by Mineralized Natural Materials: Computation, 3D printing , and Testing, Advanced Functional Materials, (09 2013): 0. doi: 10.1002/adfm.201300215 10...have made substantial progress. Recent work focuses on the analysis of topological effects of composite design, 3D printing of bioinspired and

A Progressive Damage Methodology for Residual Strength Predictions of Center-Crack Tension Composite Panels

NASA Technical Reports Server (NTRS)

Coats, Timothy William

1996-01-01

An investigation of translaminate fracture and a progressive damage methodology was conducted to evaluate and develop a residual strength prediction capability for laminated composites with through penetration notches. This is relevant to the damage tolerance of an aircraft fuselage that might suffer an in-flight accident such as an uncontained engine failure. An experimental characterization of several composite materials systems revealed an R-curve type of behavior. Fractographic examinations led to the postulate that this crack growth resistance could be due to fiber bridging, defined here as fractured fibers of one ply bridged by intact fibers of an adjacent ply. The progressive damage methodology is currently capable of predicting the initiation and growth of matrix cracks and fiber fracture. Using two difference fiber failure criteria, residual strength was predicted for different size panel widths and notch lengths. A ply discount fiber failure criterion yielded extremely conservative results while an elastic-perfectly plastic fiber failure criterion showed that the fiber bridging concept is valid for predicting residual strength for tensile dominated failure loads. Furthermore, the R-curves predicted by the model using the elastic-perfectly plastic fiber criterion compared very well with the experimental R-curves.

Application of fiber grating-based acoustic sensor in progressive failure testing of e-glass/vinylester curve composites

NASA Astrophysics Data System (ADS)

Azmi, Asrul Izam; Raju, Raju; Peng, Gang-Ding

2012-02-01

This paper reports an application of phase shifted fiber Bragg grating (PS-FBG) intensity-type acoustic sensor in a continuous and in-situ failure testing of an E-glass/vinylester top hat stiffener (THS). The narrow transmission channel of the PS-FBG is highly sensitive to small perturbation, hence suitable to be used in an effective acoustic emission (AE) assessment technique. The progressive failure of THS was tested under transverse loading to experimentally simulate the actual loading in practice. Our experimental tests have demonstrated, in good agreement with the commercial piezoelectric sensors, that the important failures information of the THS was successfully recorded by the simple intensity-type PS-FBG sensor.

Attributions and Attitudes of Mothers and Fathers in Kenya.

PubMed

Oburu, Paul Odhiambo

2011-07-01

OBJECTIVE: The present study examined differences and similarities between Kenyan mothers and fathers in attributions regarding successes and failures in caregiving situations and progressive versus authoritarian attitudes. DESIGN: Interviews were conducted with both mothers and fathers in 100 two-parent families in Kenya. RESULTS: Mothers were more likely to make attributions regarding adult-controlled failure in caregiving situations than were fathers, but mothers and fathers did not differ on attributions regarding uncontrollable success, child-controlled failure, or authoritarian or progressive attitudes. Moderate to large correlations were found between mothers and fathers in terms of attributions regarding uncontrollable success, authoritarian attitudes, and modernity of attitudes. CONCLUSIONS: Kenyan mothers and fathers hold very similar attributions for success and failures in caregiving situations as well as parenting attitudes.

Effect of exercise on diastolic function in heart failure patients: a systematic review and meta-analysis.

PubMed

Pearson, M J; Mungovan, S F; Smart, N A

2017-03-01

Diastolic dysfunction contributes to the development and progression of heart failure. Conventional echocardiography and tissue Doppler imaging are widely utilised in clinical research providing a number of indices of diastolic function valuable in the diagnosis and prognosis of heart failure patients. The aim of this meta-analysis was to quantify the effect of exercise training on diastolic function in patients with heart failure. Exercise training studies that investigate different indices of diastolic function in patients with heart failure have reported that exercise training improves diastolic function in these patients. We sought to add to the current literature by quantifying, where possible, the effect of exercise training on diastolic function. We conducted database searches (PubMed, EBSCO, EMBASE, and Cochrane Trials Register to 31 July 2016) for exercise based rehabilitation trials in heart failure, using the search terms 'exercise training, diastolic function and diastolic dysfunction'. Data from six studies, with a total of 266 heart failure with reduced ejection fraction (HFrEF) participants, 144 in intervention groups and 122 in control groups, indicated a significant reduction in the ratio of early diastolic transmitral velocity (E) to early diastolic tissue velocity (E') (E/E' ratio) with exercise training, exercise vs. control mean difference (MD) of -2.85 (95% CI -3.66 to -2.04, p < 0.00001). Data from five studies in heart failure with preserved ejection fraction (HFpEF) patients, with a total of 204 participants, 115 in intervention groups and 89 in control groups, also demonstrated a significant improvement in E/E' in exercise vs. control MD of -2.38 (95% CI -3.47 to -1.28, p < 0.0001).

Assessment of Damage Containment Features of a Full-Scale PRSEUS Fuselage Panel Through Test and Teardown

NASA Technical Reports Server (NTRS)

Bergan, Andrew C.; Bakuckas, John G., Jr.; Lovejoy, Andrew E.; Jegley, Dawn C.; Awerbuch, Jonathan; Tan, Tein-Min

2012-01-01

An area that shows promise in enhancing structural integrity of aircraft and aerospace structures is the integrally stitched composite technology. The most recent generation of this technology is the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept developed by Boeing Research and Technology and the National Aeronautics and Space Administration. A joint test program on the assessment of damage containment capabilities of the PRSEUS concept for curved fuselage structures was conducted recently at the Federal Aviation Administration William J. Hughes Technical Center. The panel was subjected to axial tension, internal pressure, and combined axial tension and internal pressure load conditions up to fracture, with a through-the-thickness, two-bay notch severing the central stiffener. For the purpose of future progressive failure analysis development and verification, extensive post failure nondestructive and teardown inspections were conducted. Detailed inspections were performed directly ahead of the notch tip where stable damage progression was observed. These examinations showed: 1) extensive delaminations developed ahead of the notch tip, 2) the extent and location of damage, 3) the typical damage mechanisms observed in composites, and 4) the role of stitching and warp-knitting in the failure mechanisms. The objective of this paper is to provide a summary of results from these posttest inspections.

Comprehensive Analysis of Gene Expression Profiles of Sepsis-Induced Multiorgan Failure Identified Its Valuable Biomarkers.

PubMed

Wang, Yumei; Yin, Xiaoling; Yang, Fang

2018-02-01

Sepsis is an inflammatory-related disease, and severe sepsis would induce multiorgan dysfunction, which is the most common cause of death of patients in noncoronary intensive care units. Progression of novel therapeutic strategies has proven to be of little impact on the mortality of severe sepsis, and unfortunately, its mechanisms still remain poorly understood. In this study, we analyzed gene expression profiles of severe sepsis with failure of lung, kidney, and liver for the identification of potential biomarkers. We first downloaded the gene expression profiles from the Gene Expression Omnibus and performed preprocessing of raw microarray data sets and identification of differential expression genes (DEGs) through the R programming software; then, significantly enriched functions of DEGs in lung, kidney, and liver failure sepsis samples were obtained from the Database for Annotation, Visualization, and Integrated Discovery; finally, protein-protein interaction network was constructed for DEGs based on the STRING database, and network modules were also obtained through the MCODE cluster method. As a result, lung failure sepsis has the highest number of DEGs of 859, whereas the number of DEGs in kidney and liver failure sepsis samples is 178 and 175, respectively. In addition, 17 overlaps were obtained among the three lists of DEGs. Biological processes related to immune and inflammatory response were found to be significantly enriched in DEGs. Network and module analysis identified four gene clusters in which all or most of genes were upregulated. The expression changes of Icam1 and Socs3 were further validated through quantitative PCR analysis. This study should shed light on the development of sepsis and provide potential therapeutic targets for sepsis-induced multiorgan failure.

Categorizing accident sequences in the external radiotherapy for risk analysis

PubMed Central

2013-01-01

Purpose This study identifies accident sequences from the past accidents in order to help the risk analysis application to the external radiotherapy. Materials and Methods This study reviews 59 accidental cases in two retrospective safety analyses that have collected the incidents in the external radiotherapy extensively. Two accident analysis reports that accumulated past incidents are investigated to identify accident sequences including initiating events, failure of safety measures, and consequences. This study classifies the accidents by the treatments stages and sources of errors for initiating events, types of failures in the safety measures, and types of undesirable consequences and the number of affected patients. Then, the accident sequences are grouped into several categories on the basis of similarity of progression. As a result, these cases can be categorized into 14 groups of accident sequence. Results The result indicates that risk analysis needs to pay attention to not only the planning stage, but also the calibration stage that is committed prior to the main treatment process. It also shows that human error is the largest contributor to initiating events as well as to the failure of safety measures. This study also illustrates an event tree analysis for an accident sequence initiated in the calibration. Conclusion This study is expected to provide sights into the accident sequences for the prospective risk analysis through the review of experiences. PMID:23865005

Adhesive Characterization and Progressive Damage Analysis of Bonded Composite Joints

NASA Technical Reports Server (NTRS)

Girolamo, Donato; Davila, Carlos G.; Leone, Frank A.; Lin, Shih-Yung

2014-01-01

The results of an experimental/numerical campaign aimed to develop progressive damage analysis (PDA) tools for predicting the strength of a composite bonded joint under tensile loads are presented. The PDA is based on continuum damage mechanics (CDM) to account for intralaminar damage, and cohesive laws to account for interlaminar and adhesive damage. The adhesive response is characterized using standard fracture specimens and digital image correlation (DIC). The displacement fields measured by DIC are used to calculate the J-integrals, from which the associated cohesive laws of the structural adhesive can be derived. A finite element model of a sandwich conventional splice joint (CSJ) under tensile loads was developed. The simulations indicate that the model is capable of predicting the interactions of damage modes that lead to the failure of the joint.

Failure mode and effect analysis-based quality assurance for dynamic MLC tracking systems

PubMed Central

Sawant, Amit; Dieterich, Sonja; Svatos, Michelle; Keall, Paul

2010-01-01

Purpose: To develop and implement a failure mode and effect analysis (FMEA)-based commissioning and quality assurance framework for dynamic multileaf collimator (DMLC) tumor tracking systems. Methods: A systematic failure mode and effect analysis was performed for a prototype real-time tumor tracking system that uses implanted electromagnetic transponders for tumor position monitoring and a DMLC for real-time beam adaptation. A detailed process tree of DMLC tracking delivery was created and potential tracking-specific failure modes were identified. For each failure mode, a risk probability number (RPN) was calculated from the product of the probability of occurrence, the severity of effect, and the detectibility of the failure. Based on the insights obtained from the FMEA, commissioning and QA procedures were developed to check (i) the accuracy of coordinate system transformation, (ii) system latency, (iii) spatial and dosimetric delivery accuracy, (iv) delivery efficiency, and (v) accuracy and consistency of system response to error conditions. The frequency of testing for each failure mode was determined from the RPN value. Results: Failures modes with RPN≥125 were recommended to be tested monthly. Failure modes with RPN<125 were assigned to be tested during comprehensive evaluations, e.g., during commissioning, annual quality assurance, and after major software∕hardware upgrades. System latency was determined to be ∼193 ms. The system showed consistent and accurate response to erroneous conditions. Tracking accuracy was within 3%–3 mm gamma (100% pass rate) for sinusoidal as well as a wide variety of patient-derived respiratory motions. The total time taken for monthly QA was ∼35 min, while that taken for comprehensive testing was ∼3.5 h. Conclusions: FMEA proved to be a powerful and flexible tool to develop and implement a quality management (QM) framework for DMLC tracking. The authors conclude that the use of FMEA-based QM ensures efficient allocation of clinical resources because the most critical failure modes receive the most attention. It is expected that the set of guidelines proposed here will serve as a living document that is updated with the accumulation of progressively more intrainstitutional and interinstitutional experience with DMLC tracking. PMID:21302802

Sacroiliac joint luxation after pedicle subtraction osteotomy: report of two cases and analysis of failure mechanism.

PubMed

Charles, Yann Philippe; Yu, Bo; Steib, Jean-Paul

2016-05-01

Sagittal decompensation after pedicle subtraction osteotomy (PSO) is considered as late onset complication. Several mechanisms have been suggested, but little attention has been paid to the caudal end of lumbar instrumented fusion, especially sacral iliac joint (SIJ) deterioration. Clinical histories and radiographic sagittal parameters of two patients with SIJ luxation after PSO are presented. The biomechanical failure mechanism and risk factors are analysed. Two patients underwent correction of fixed anterior sagittal imbalance by PSO, followed by pseudarthrosis revision surgery. Both of them sustained persistent sacroiliac pain, progressive recurrence of anterior imbalance and progressive pelvic incidence (PI) increase around 10°. An acute bilateral SIJ luxation occurred in both patients leading to sharp increase or PI around 20°. One patient was treated by SIJ fusion and the other patient was placed on non-weight-bearing crutch ambulation for 1 year. Both patients had a high preoperative PI (95° and 78°). A theoretical match between lumbar lordosis (LL) and PI was not achieved by PSO. Osteopenia was present in both patients. Computed tomography evidenced L5-S1 pseudarthrosis and sacroiliac joint violation by pelvic or sacral ala screws. Patients with high PI might seek for further compensation at their SIJ when lacking LL after PSO. Chronic anterior imbalance might lead to progressive weakening of sacroiliac ligaments. Initial circumferential lumbosacral fusion and accurate iliac screw fixation might reduce stress on implants, risk for pseudarthrosis, implant failure and finally SIJ deterioration. Bone mineral density should further be investigated preoperatively.

[The effect of low-protein diet supplemented with ketoacids in patients with chronic renal failure].

PubMed

Molnár, Márta; Szekeresné Izsák, Margit; Nagy, Judit; Figler, Mária

2009-02-01

It is known that dietary protein restriction slows the progression of chronic renal disease. If daily protein intake is less than 0.5-0.6 g/kgbw, the diet has to be supplemented with essential aminoacids/ketoacids. In this study the authors evaluate the long-term effect of low-protein diet supplemented with ketoacids on the progression of chronic renal failure, calcium and phosphorus metabolism, nutritional status, the compliance of patients and the permanent dietary education for the compliance. 51 predialysis patients have been treated with ketoacids supplemented low-protein diet during 12-57 months (mean treatment period: 26 months). Serum creatinine raised from 349.72+/-78.04 micromol/l to 460.66+/-206.66 micromol/l (27 micromol/l/year or 2.3 micromol/l/month), glomerular filtration rate (GFR) decreased from 21.52+/-7.84 ml/min to 18.22+/-7.76 ml/min (0.83 ml/min/year or 0.07 ml/min/month). The slope of 1/serum creatinine versus time was 0.0018 by linear regression analysis. Serum parathormon decreased significantly, but serum calcium and phosphorus did not change. Nutritional status of patients did not change significantly during the follow-up period. Protein intake decreased significantly and remained at this lower level during the treatment period. According to results: low-protein diet supplemented with ketoacids was effective in slowing progression of chronic renal failure, decreased PTH, did not change nutritional status. With permanently and good education it was possible to keep patients on low-protein diet for a long period.

Is neonatal head circumference related to caesarean section for failure to progress?

PubMed

de Vries, Bradley; Bryce, Bianca; Zandanova, Tatiana; Ting, Jason; Kelly, Patrick; Phipps, Hala; Hyett, Jon A

2016-12-01

There is global concern about rising caesarean section rates. Identification of risk factors could lead to preventative measures. To describe the association between neonatal head circumference and (i) caesarean section for failure to progress, (ii) intrapartum caesarean section overall. This was a retrospective cohort study of 11 687 singleton live births with cephalic presentation, attempted vaginal birth and at least 37 completed weeks gestation from January 2005 to June 2009. Neonatal head circumference was grouped into quartiles and multiple logistic regressions performed. The rates of caesarean section for failure to progress were 4.1, 6.4, 8.8 and 14.3% in successive head circumference quartiles. Rates of intrapartum caesarean section overall were 8.7, 12.1, 15.8 and 21.5%. The odds ratios for caesarean section for failure to progress were: 1.00, 1.33 (95% CI 1.02- 1.73), 1.54 (1.18-2.02) and 1.93 (1.44-2.57) for successive head circumference quartiles after adjusting for multiple demographic and clinical factors. The adjusted odds ratios for intrapartum caesarean section for any indication were: 1.00, 1.52 (95% CI 1.24-1.87), 1.99 (1.62-2.46) and 2.38 (1.89-3.00), respectively. There is a strong positive relationship between head circumference quartile and both caesarean section for failure to progress and caesarean for any indication. If this finding is confirmed using ultrasound measurements, there is potential for head circumference to be incorporated into predictive models for intrapartum caesarean section with a view to offering interventions to reduce the risk of caesarean section. © 2016 The Royal Australian and New Zealand College of Obstetricians and Gynaecologists.

Apatinib plus icotinib in treating advanced non-small cell lung cancer after icotinib treatment failure: a retrospective study

PubMed Central

Xu, Jianping; Liu, Xiaoyan; Yang, Sheng; Zhang, Xiangru; Shi, Yuankai

2017-01-01

Background Treatment failure frequently occurs in patients with epidermal growth factor receptor (EGFR)-mutant non-small cell lung cancer (NSCLC) who respond to EGFR tyrosine kinase inhibitors initially. This retrospective study tried to investigate the efficacy and safety of apatinib plus icotinib in patients with advanced NSCLC after icotinib treatment failure. Patients and methods This study comprised 27 patients with advanced NSCLC who had progressed after icotinib monotherapy. Initially, patients received oral icotinib (125 mg, tid) alone. When the disease progressed, they received icotinib plus apatinib (500 mg, qd, orally). Treatment was continued until disease progression, unacceptable toxicity or consent withdrawal. Results Followed up to December 2016, the median time of combined therapy was 7.47 months, and eight of 27 patients were dead. The median overall survival was not reached, and median progression-free survival (PFS) was 5.33 months (95% CI, 3.63–7.03 months). Moreover, the objective response rate (ORR) was 11.1%, and the disease control rate (DCR) was 81.5%. A total of 14 patients received combined therapy as the second-line treatment, and the ORR and DCR were 7.1% and 78.6%, respectively; 13 patients received drugs as the third- or later-line treatment, with an ORR and a DCR of 15.4% and 84.6%, respectively. In addition, 11 patients experienced icotinib monotherapy failure within 6 months with median PFS of 7.37 months, and 16 patients had progression after 6 months with median PFS of 2.60 months. The common drug-related toxic effects were hypertension (44.4%) and fatigue (37.0%). Conclusion Apatinib plus icotinib is efficacious in treating patients with advanced NSCLC after icotinib treatment failure, with acceptable toxic effects. PMID:29075129

Apatinib plus icotinib in treating advanced non-small cell lung cancer after icotinib treatment failure: a retrospective study.

PubMed

Xu, Jianping; Liu, Xiaoyan; Yang, Sheng; Zhang, Xiangru; Shi, Yuankai

2017-01-01

Treatment failure frequently occurs in patients with epidermal growth factor receptor (EGFR)-mutant non-small cell lung cancer (NSCLC) who respond to EGFR tyrosine kinase inhibitors initially. This retrospective study tried to investigate the efficacy and safety of apatinib plus icotinib in patients with advanced NSCLC after icotinib treatment failure. This study comprised 27 patients with advanced NSCLC who had progressed after icotinib monotherapy. Initially, patients received oral icotinib (125 mg, tid) alone. When the disease progressed, they received icotinib plus apatinib (500 mg, qd, orally). Treatment was continued until disease progression, unacceptable toxicity or consent withdrawal. Followed up to December 2016, the median time of combined therapy was 7.47 months, and eight of 27 patients were dead. The median overall survival was not reached, and median progression-free survival (PFS) was 5.33 months (95% CI, 3.63-7.03 months). Moreover, the objective response rate (ORR) was 11.1%, and the disease control rate (DCR) was 81.5%. A total of 14 patients received combined therapy as the second-line treatment, and the ORR and DCR were 7.1% and 78.6%, respectively; 13 patients received drugs as the third- or later-line treatment, with an ORR and a DCR of 15.4% and 84.6%, respectively. In addition, 11 patients experienced icotinib monotherapy failure within 6 months with median PFS of 7.37 months, and 16 patients had progression after 6 months with median PFS of 2.60 months. The common drug-related toxic effects were hypertension (44.4%) and fatigue (37.0%). Apatinib plus icotinib is efficacious in treating patients with advanced NSCLC after icotinib treatment failure, with acceptable toxic effects.

Prognostic markers and tumour growth kinetics in melanoma patients progressing on vemurafenib.

PubMed

Seifert, Heike; Fisher, Rosalie; Martin-Liberal, Juan; Edmonds, Kim; Hughes, Peta; Khabra, Komel; Gore, Martin; Larkin, James

2016-04-01

The BRAF inhibitor vemurafenib is an effective drug in patients with BRAF mutant metastatic melanoma, but resistance occurs after a median of 6 months. The anti-CTLA4-antibody, ipilimumab, is a standard first-line and second-line treatment option in Europe, with a median time to response of 2-3 months, but some patients show rapid clinical deterioration before that. The aim of this analysis was to identify prognostic markers for survival after failure of vemurafenib treatment to identify patients who have a sufficient life expectancy to respond to new immunotherapy treatments. We retrospectively analysed 101 consecutive unselected patients treated with vemurafenib for metastatic melanoma at a single institution. The association between clinical parameters and death within 3 months after cessation of vemurafenib (n=69) was assessed by binary logistic and Cox regression. Of the patients, 45% died within 3 months of progression on vemurafenib. Elevated baseline serum lactate dehydrogenase, absence of normalization of serum lactate dehydrogenase on vemurafenib therapy, performance status of at least 2 at progression and time from primary tumour to metastatic disease less than 5 years were identified as poor prognostic markers. In an exploratory tumour growth kinetics analysis (n=16), we found that following cessation of vemurafenib, approximately a third each showed a stable, decelerated or accelerated rate of tumour growth. Patients with these poor prognostic markers are unlikely to have sufficient life expectancy to complete ipilimumab treatment after failure with vemurafenib. Consideration needs to be given to the elective use of immunotherapy before patients become resistant to vemurafenib. This requires prospective randomized evaluation. Our tumour growth kinetics analysis requires confirmation; however, it may suggest that intermittent vemurafenib treatment should be investigated in clinical trials.

Fukushima Daiichi unit 1 uncertainty analysis--Preliminary selection of uncertain parameters and analysis methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cardoni, Jeffrey N.; Kalinich, Donald A.

2014-02-01

Sandia National Laboratories (SNL) plans to conduct uncertainty analyses (UA) on the Fukushima Daiichi unit (1F1) plant with the MELCOR code. The model to be used was developed for a previous accident reconstruction investigation jointly sponsored by the US Department of Energy (DOE) and Nuclear Regulatory Commission (NRC). However, that study only examined a handful of various model inputs and boundary conditions, and the predictions yielded only fair agreement with plant data and current release estimates. The goal of this uncertainty study is to perform a focused evaluation of uncertainty in core melt progression behavior and its effect on keymore » figures-of-merit (e.g., hydrogen production, vessel lower head failure, etc.). In preparation for the SNL Fukushima UA work, a scoping study has been completed to identify important core melt progression parameters for the uncertainty analysis. The study also lays out a preliminary UA methodology.« less

Natural history of major complications in hepatitis C virus-related cirrhosis evaluated by per-rectal portal scintigraphy

PubMed Central

Kawamura, Etsushi; Habu, Daiki; Hayashi, Takehiro; Oe, Ai; Kotani, Jin; Ishizu, Hirotaka; Torii, Kenji; Kawabe, Joji; Fukushima, Wakaba; Tanaka, Takashi; Nishiguchi, Shuhei; Shiomi, Susumu

2005-01-01

AIM: To examine the correlation between the porto-systemic hypertension evaluated by portal shunt index (PSI) and life-threatening complications, including hepatocellular carcinoma (HCC), liver failure (Child-Pugh stage progression), and esophagogastric varices. METHODS: Two hundred and twelve consecutive subjects with HCV-related cirrhosis (LC-C) underwent per-rectal portal scintigraphy. They were allocated into three groups according to their PSI: group I, PSI ≤ 10%; group II, 10%

GENOA-PFA: Progressive Fracture in Composites Simulated Computationally

NASA Technical Reports Server (NTRS)

Murthy, Pappu L. N.

2000-01-01

GENOA-PFA is a commercial version of the Composite Durability Structural Analysis (CODSTRAN) computer program that simulates the progression of damage ultimately leading to fracture in polymer-matrix-composite (PMC) material structures under various loading and environmental conditions. GENOA-PFA offers several capabilities not available in other programs developed for this purpose, making it preferable for use in analyzing the durability and damage tolerance of complex PMC structures in which the fiber reinforcements occur in two- and three-dimensional weaves and braids. GENOA-PFA implements a progressive-fracture methodology based on the idea that a structure fails when flaws that may initially be small (even microscopic) grow and/or coalesce to a critical dimension where the structure no longer has an adequate safety margin to avoid catastrophic global fracture. Damage is considered to progress through five stages: (1) initiation, (2) growth, (3) accumulation (coalescence of propagating flaws), (4) stable propagation (up to the critical dimension), and (5) unstable or very rapid propagation (beyond the critical dimension) to catastrophic failure. The computational simulation of progressive failure involves formal procedures for identifying the five different stages of damage and for relating the amount of damage at each stage to the overall behavior of the deteriorating structure. In GENOA-PFA, mathematical modeling of the composite physical behavior involves an integration of simulations at multiple, hierarchical scales ranging from the macroscopic (lamina, laminate, and structure) to the microscopic (fiber, matrix, and fiber/matrix interface), as shown in the figure. The code includes algorithms to simulate the progression of damage from various source defects, including (1) through-the-thickness cracks and (2) voids with edge, pocket, internal, or mixed-mode delaminations.

[Research progress of polyethylene inserts wear measurement and evaluation in total knee arthroplasty].

PubMed

Zhao, Feng; Wang, Chuan; Fan, Yubo

2015-01-01

Wear of polyethylene (PE) tibial inserts is a significant cause of implant failure of total knee arthroplasty (TKA). PE inserts wear measurement and evaluation is the key in TKA researches. There are many methods to measure insert wear. Qualitative methods such as observation are used to determine the wear and its type. Quantitative methods such as gravimetric analysis, coordinate measuring machines (CMM) and micro-computed tomography (micro-CT) are used to measure the mass, volume and geometry of wear. In this paper, the principle, characteristics and research progress of main insert wear evaluation method were introduced and the problems and disadvantages were analyzed.

Behavior of wet precast beam column connections under progressive collapse scenario: an experimental study

NASA Astrophysics Data System (ADS)

Nimse, Rohit B.; Joshi, Digesh D.; Patel, Paresh V.

2014-12-01

Progressive collapse denotes a failure of a major portion of a structure that has been initiated by failure of a relatively small part of the structure such as failure of any vertical load carrying element (typically columns). Failure of large part of any structure will results into substantial loss of human lives and natural resources. Therefore, it is important to prevent progressive collapse which is also known as disproportionate collapse. Nowadays, there is an increasing trend toward construction of buildings using precast concrete. In precast concrete construction, all the components of structures are produced in controlled environment and they are being transported to the site. At site such individual components are connected appropriately. Connections are the most critical elements of any precast structure, because in past major collapse of precast structure took place because of connection failure. In this study, behavior of three different 1/3rd scaled wet precast beam column connections under progressive collapse scenario are studied and its performance is compared with monolithic connection. Precast connections are constructed by adopting different connection detailing at the junction by considering reinforced concrete corbel for two specimens and steel billet for one specimen. Performance of specimen is evaluated on the basis of ultimate load carrying capacity, maximum deflection and deflection measured along the span of the beam. From the results, it is observed that load carrying capacity and ductility of precast connections considered in this study are more than that of monolithic connections.

Progress and prospect on failure mechanisms of solid-state lithium batteries

NASA Astrophysics Data System (ADS)

Ma, Jun; Chen, Bingbing; Wang, Longlong; Cui, Guanglei

2018-07-01

By replacing traditional liquid organic electrolyte with solid-state electrolyte, the solid-state lithium batteries powerfully come back to the energy storage field due to their eminent safety and energy density. In recent years, a variety of solid-state lithium batteries based on excellent solid-state electrolytes are developed. However, the performance degradation of solid-state lithium batteries during cycling and storing is still a serious challenge for practical application. Therefore, this review summarizes the research progress of solid-state lithium batteries from the perspectives of failure phenomena and failure mechanisms. Additionally, the development of methodologies on studying the failure mechanisms of solid-state lithium batteries is also reviewed. Moreover, some perspectives on the remaining questions for understanding the failure behaviors and achieving long cycle life, high safety and high energy density solid-state lithium batteries are presented. This review will help researchers to recognize the status of solid-state lithium batteries objectively and attract much more research interest in conquering the failure issues of solid-state lithium batteries.

Two planar polishing methods by using FIB technique: Toward ultimate top-down delayering for failure analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, D. D., E-mail: dandan.wang@globalfoundries.com; Huang, Y. M.; Tan, P. K.

2015-12-15

Presently two major limiting factors are hindering the failure analysis (FA) development during the semiconductor manufacturing process and technology improvement: (1) Impossibility of manual polishing on the edge dies due to the amenability of layer peeling off; (2) Abundant demand of multi-locations FA, especially focusing different levels of layers simultaneously. Aiming at resolving these limitations, here we demonstrate two unique high precision polishing methods by using focused ion beam (FIB) technique. One is the vertical top down chemical etching at the aimed location; the other one is the planar top down slicing. Using the FIB for delayering not only solvesmore » these problems mentioned above, but also offers significant advantages over physical planar polishing methods such as: (1) having a better control of the delayering progress, (2) enabling precisely milling at a region of interest, (3) providing the prevention of over-delayering and (4) possessing capability to capture images at the region of interest simultaneously and cut into the die directly to expose the exact failure without damaging other sections of the specimen.« less

A practical guide to exercise training for heart failure patients.

PubMed

Smart, Neil; Fang, Zhi You; Marwick, Thomas H

2003-02-01

Exercise training has been shown to improve exercise capacity in patients with heart failure. We sought to examine the optimal strategy of exercise training for patients with heart failure. Review of the published data on the characteristics of the training program, with comparison of physiologic markers of exercise capacity in heart failure patients and healthy individuals and comparison of the change in these characteristics after an exercise training program. Many factors, including the duration, supervision, and venue of exercise training; the volume of working muscle; the delivery mode (eg, continuous vs. intermittent exercise), training intensity; and the concurrent effects of medical treatments may influence the results of exercise training in heart failure. Starting in an individually prescribed and safely monitored hospital-based program, followed by progression to an ongoing and progressive home program of exercise appears to be the best solution to the barriers of anxiety, adherence, and "ease of access" encountered by the heart failure patient. Various exercise training programs have been shown to improve exercise capacity and symptom status in heart failure, but these improvements may only be preserved with an ongoing maintenance program.

[Sleep apnea and heart failure: pathophysiology, diagnosis and therapy].

PubMed

Monda, Cinzia; Scala, Oriana; Paolillo, Stefania; Savarese, Gianluigi; Cecere, Milena; D'Amore, Carmen; Parente, Antonio; Musella, Francesca; Mosca, Susanna; Filardi, Pasquale Perrone

2010-11-01

Sleep apnea, defined as a pathologic pause in breathing during sleep >10 s, promotes the progression of chronic heart failure and may be a predictor of poor prognosis. It causes, in fact, several mechanical, hemodynamic, chemical and inflammatory changes that negatively compromise cardiovascular homeostasis of heart failure patients. Sleep apnea is recognized as sleep apnea syndrome when specific symptoms, such as sleepiness and headache during the daytime and snoring, are present and is diagnosed with an overnight test called polysomnography. There are two different forms of sleep apnea, central and obstructive. Breathing is interrupted by the loss of respiratory drive and the lack of respiratory effort in the central form, which affects about 40-60% of heart failure patients. In obstructive sleep apnea, breathing stops when throat muscles relax, despite respiratory effort. This form affects about 3% of the general population, while it is present in at least 30% of heart failure patients. The diagnosis of sleep disorders in heart failure becomes very important to help patients adopting lifestyle changes and starting specific therapies to improve quality of life and retard the progression of chronic heart failure.

TEXCAD: Textile Composite Analysis for Design. Version 1.0: User's manual

NASA Technical Reports Server (NTRS)

Naik, Rajiv A.

1994-01-01

The Textile Composite Analysis for Design (TEXCAD) code provides the materials/design engineer with a user-friendly desktop computer (IBM PC compatible or Apple Macintosh) tool for the analysis of a wide variety of fabric reinforced woven and braided composites. It can be used to calculate overall thermal and mechanical properties along with engineering estimates of damage progression and strength. TEXCAD also calculates laminate properties for stacked, oriented fabric constructions. It discretely models the yarn centerline paths within the textile repeating unit cell (RUC) by assuming sinusoidal undulations at yarn cross-over points and uses a yarn discretization scheme (which subdivides each yarn not smaller, piecewise straight yarn slices) together with a 3-D stress averaging procedure to compute overall stiffness properties. In the calculations for strength, it uses a curved beam-on-elastic foundation model for yarn undulating regions together with an incremental approach in which stiffness properties for the failed yarn slices are reduced based on the predicted yarn slice failure mode. Nonlinear shear effects and nonlinear geometric effects can be simulated. Input to TEXCAD consists of: (1) materials parameters like impregnated yarn and resin properties such moduli, Poisson's ratios, coefficients of thermal expansion, nonlinear parameters, axial failure strains and in-plane failure stresses; and (2) fabric parameters like yarn sizes, braid angle, yarn packing density, filament diameter and overall fiber volume fraction. Output consists of overall thermoelastic constants, yarn slice strains/stresses, yarn slice failure history, in-plane stress-strain response and ultimate failure strength. Strength can be computed under the combined action of thermal and mechanical loading (tension, compression and shear).

Time-frequency vibration analysis for the detection of motor damages caused by bearing currents

NASA Astrophysics Data System (ADS)

Prudhom, Aurelien; Antonino-Daviu, Jose; Razik, Hubert; Climente-Alarcon, Vicente

2017-02-01

Motor failure due to bearing currents is an issue that has drawn an increasing industrial interest over recent years. Bearing currents usually appear in motors operated by variable frequency drives (VFD); these drives may lead to common voltage modes which cause currents induced in the motor shaft that are discharged through the bearings. The presence of these currents may lead to the motor bearing failure only few months after system startup. Vibration monitoring is one of the most common ways for detecting bearing damages caused by circulating currents; the evaluation of the amplitudes of well-known characteristic components in the vibration Fourier spectrum that are associated with race, ball or cage defects enables to evaluate the bearing condition and, hence, to identify an eventual damage due to bearing currents. However, the inherent constraints of the Fourier transform may complicate the detection of the progressive bearing degradation; for instance, in some cases, other frequency components may mask or be confused with bearing defect-related while, in other cases, the analysis may not be suitable due to the eventual non-stationary nature of the captured vibration signals. Moreover, the fact that this analysis implies to lose the time-dimension limits the amount of information obtained from this technique. This work proposes the use of time-frequency (T-F) transforms to analyse vibration data in motors affected by bearing currents. The experimental results obtained in real machines show that the vibration analysis via T-F tools may provide significant advantages for the detection of bearing current damages; among other, these techniques enable to visualise the progressive degradation of the bearing while providing an effective discrimination versus other components that are not related with the fault. Moreover, their application is valid regardless of the operation regime of the machine. Both factors confirm the robustness and reliability of these tools that may be an interesting alternative for detecting this type of failure in induction motors.

Presence of acute and chronic renal failure in patients with paroxysmal nocturnal hemoglobinuria: results of a retrospective analysis from the Spanish PNH Registry.

PubMed

Villegas, Ana; Núñez, Ramiro; Gaya, Anna; Cuevas-Ruiz, María Victoria; Bosch, José Miguel; Carral, Anna; Arrizabalaga, Beatriz; Gómez-Roncero, María Isabel; Mora, Asunción; Bravo, Pilar; Lavilla, Esperanza; Monteserín, Carmen; Hernández, Belén; Martínez-Barranco, Pilar; Jarque, Isidro; Urquía, María Anunciación; García-Donas, Gloria; Brunet, Salut; González, Fernando Ataulfo; Urbano, Álvaro

2017-10-01

Paroxysmal nocturnal hemoglobinuria (PNH) is a rare, life-threatening blood disease. With the advent of eculizumab treatment, renal function has substantially improved, although no data from real-world clinical practice are available. An observational, retrospective, multicenter study was conducted in Spain on clinical data obtained from outpatient visits of patients with PNH (Spanish PNH Registry) who had experienced acute (ARF) or chronic (CRF) renal failure. Of the 128 patients registered (April 2014), 60 were diagnosed with classic PNH. Twenty-seven (45.0%) patients with a mean age of 48.5 (±16.2) years had renal failure, ARF or CRF, and were included in this study. Near half of the patients (n = 13; 48.1%) presented with ARF alone, 33.3% (n = 9) had CRF with episodes of ARF, while 18.5% (n = 5) were diagnosed with CRF alone. For patients with diagnosis of PNH and renal failure (n = 27), the median time to the first ARF episode was 6.5 (CI 95%; 2.2, 14.9) years, whereas the median to the diagnosis of CRF was 14.5 (CI 95%; 3.8, 19.2) years after the diagnosis of PNH. Patients with ARF (n = 22) were treated with eculizumab and did not experience new episodes of ARF, except for one patient with sepsis. Of the patients with CRF, two received treatment without experiencing further episodes of ARF. Sixteen patients who completed treatment (11 with ARF and 5 with ARF + CRF) recovered from the episode of ARF or from CRF. Of the remaining patients treated with eculizumab, one patient improved from stages III to II, three patients stabilized without showing disease progression, and one patient progressed from stages III to IV. Treatment with eculizumab in PNH patients has beneficial effects on renal function, preventing ARF and progression to CRF.

[Analysis of reason and strategy for the failure of posterior pedicle screw short-segment internal fixation on thoracolumbar fractures].

PubMed

Xing, Jin-Ming; Peng, Wen-Ming; Shi, Chu-Yun; Xu, Lei; Pan, Qi-Huao

2013-03-01

To analyze the reason and strategy for failure of posterior pedicle screw short-segment internal fixation on thoracolumbar fractures. From March 2008 to December 2010,the clinical data of 18 patients with thoracolumbar fracture failed in posterior pedicle screw short-segment internal fixation were retrospectively analyzed. There were 11 males and 7 females with an average age of 37.2 years (ranged, 19 to 63). The time from the first operation to complication occurrence was from 6 to 44 months with an average of 14.3 months. Of them,fusion failure was in 7 cases (combined with screw breakage in 4 cases), the progressive neuro-dysfunction was in 5 cases,the progressive lumbodorsal pain was in 6 cases. All 18 patients with kyphosis were treated with anterior internal fixation remaining posterior fixation (9 cases) and anterior internal fixation after posterior fixation removal (9 cases). All the patients were followed up from 18 to 50 months with an average of 30.5 months. No intetnal fixation loosening and breakage were found, moreover, X-ray and lamellar CT showed bone healing well. Preoperative, postoperative at 3 months and at final follow-up, ODI score was respectively 31.6+/-5.1, 8.6+/-5.7, 8.3+/-3.2; VAS score was respectively 7.2+/-2.3, 2.3+/-0.7, 2.1+/-1.1; kyphosis angle was respectively (-21.2/-+7.8 degreeso, (-5.3+/-6.8 degrees ), (-5.8+/-7.8 )degrees. Compared with preoperative data ,above-listed items had obviously ameliorated(P<0.05). Treatment of thoracolumbar fracture with posterior pedicle screw short-segment internal fixation may result in the complications such as bone nonunion ,internal fixation breakage and progressive kyphosis. Anterior reconstruction may be a good strategy for the failure of posterior operation.

Failure of composite plates under static biaxial planar loading

NASA Technical Reports Server (NTRS)

Waas, Anthony M.; Khamseh, Amir R.

1992-01-01

The project involved detailed investigations into the failure mechanisms in composite plates as a function of hole size (holes centrally located in the plates) under static loading. There were two phases to the project, the first dealing with uniaxial loads along the fiber direction, and the second dealing with coplanar biaxial loading. Results for the uniaxial tests have been reported and published previously, thus this report will place emphasis on the second phase of the project, namely the biaxial tests. The composite plates used in the biaxial loading experiments, as well as the uniaxial, were composed of a single ply unidirectional graphite/epoxy prepreg sandwiched between two layers of transparent thermoplastic. This setup enabled us to examine the failure initiation and propagation modes nondestructively, during the test. Currently, similar tests and analysis of results are in progress for graphite/epoxy cruciform shaped flat laminates. The results obtained from these tests will be available at a later time.

The Loss of GSTM1 Associates with Kidney Failure and Heart Failure.

PubMed

Tin, Adrienne; Scharpf, Robert; Estrella, Michelle M; Yu, Bing; Grove, Megan L; Chang, Patricia P; Matsushita, Kunihiro; Köttgen, Anna; Arking, Dan E; Boerwinkle, Eric; Le, Thu H; Coresh, Josef; Grams, Morgan E

2017-11-01

Glutathione S-transferase mu 1 ( GSTM1) encodes an enzyme that catalyzes the conjugation of electrophilic compounds with glutathione to facilitate their degradation or excretion. The loss of one or both copies of GSTM1 is common in many populations and has been associated with CKD progression. With the hypothesis that the loss of GSTM1 is also associated with incident kidney failure and heart failure, we estimated GSTM1 copy number using exome sequencing reads in the Atherosclerosis Risk in Communities (ARIC) Study, a community-based prospective cohort of white and black participants. Overall, 51.2% and 39.8% of white participants and 25.6% and 48.5% of black participants had zero or one copy of GSTM1 , respectively. Over a median follow-up of 24.6 years, 256 kidney failure events occurred in 5715 participants without prevalent kidney failure, and 1028 heart failure events occurred in 5368 participants without prevalent heart failure. In analysis adjusted for demographics, diabetes, and hypertension, having zero or one copy of GSTM1 associated with higher risk of kidney failure and heart failure (adjusted hazard ratio [95% confidence interval] for zero or one versus two copies of GSTM1 : kidney failure, 1.66 [1.27 to 2.17]; heart failure, 1.16 [1.04 to 1.29]). Risk did not differ significantly between participants with zero and one copy of GSTM1 ( P >0.10). In summary, the loss of GSTM1 was significantly associated with incident kidney and heart failure, independent of traditional risk factors. These results suggest GSTM1 function is a potential treatment target for the prevention of kidney and heart failure. Copyright © 2017 by the American Society of Nephrology.

Reading tarot cards.

PubMed

Edmunds, L Henry

2004-02-01

In some patients acute myocardial infarction and/or infarct expansion induces progressive left ventricular dilatation that eventually leads to heart failure and death. The five year mortality after onset of heart failure is 50%. Chronically stretched viable myocardium adjacent to or remote from an expanding infarction initiates a myopathic process that leads to progressive myocyte apoptosis and adverse postinfarction remodeling. Revascularization of stunned or hibernating myocardium restores contractility and benefits patients in heart failure; however, revascularization does not restore contractility to myopathic, remodeling myocardium. Contemporary operations for heart failure temporarily reduce ventricular wall stress, but fail to reverse stretch induced myocyte apoptosis, which may not be reversible. Logically, prevention of this myopathic process after acute infarction seems required to extend survival. It follows that surgeons should operate before adverse postinfarction left ventricular remodeling occurs, using new operations, rather than afterwards.

Unusual course of infective endocarditis: acute renal failure progressing to chronic renal failure.

PubMed

Sevinc, Alper; Davutoglu, Vedat; Barutcu, Irfan; Kocoglu, M Esra

2006-04-01

Infective endocarditis is an infection of the endocardium that usually involves the valves and adjacent structures. The classical fever of unknown origin presentation represents a minority of infective endocarditis. The presented case was a 21-yearold young lady presenting with acute renal failure and fever to the emergency room. Cardiac auscultation revealed a soft S1 and 4/6 apical holosystolic murmur extended to axilla. Echocardiography showed mobile fresh vegetation under the mitral posterior leaflet. She was diagnosed as having infective endocarditis. Hemodialysis was started with antimicrobial therapy. However, because of the presence of severe mitral regurgitation with left ventricle dilatation and large mobile vegetation, mitral prosthetic mechanical valve replacement was performed. Although treated with antibiotics combined with surgery, renal functions were deteriorated and progressed to chronic renal failure.

Comprehensive analysis of cochlear implant failure: usefulness of clinical symptom-based algorithm combined with in situ integrity testing.

PubMed

Yamazaki, Hiroshi; O'Leary, Stephen; Moran, Michelle; Briggs, Robert

2014-04-01

Accurate diagnosis of cochlear implant failures is important for management; however, appropriate strategies to assess possible device failures are not always clear. The purpose of this study is to understand correlation between causes of device failure and the presenting clinical symptoms as well as results of in situ integrity testing and to propose effective strategies for diagnosis of device failure. Retrospective case review. Cochlear implant center at a tertiary referral hospital. Twenty-seven cases with suspected device failure of Cochlear Nucleus systems (excluding CI512 failures) on the basis of deterioration in auditory perception from January 2000 to September 2012 in the Melbourne cochlear implant clinic. Clinical presentations and types of abnormalities on in situ integrity testing were compared with modes of device failure detected by returned device analysis. Sudden deterioration in auditory perception was always observed in cases with "critical damage": either fracture of the integrated circuit or most or all of the electrode wires. Subacute or gradually progressive deterioration in auditory perception was significantly associated with a more limited number of broken electrode wires. Cochlear implant mediated auditory and nonauditory symptoms were significantly associated with an insulation problem. An algorithm based on the time course of deterioration in auditory perception and cochlear implant-mediated auditory and nonauditory symptoms was developed on the basis of these retrospective analyses, to help predict the mode of device failure. In situ integrity testing, which included close monitoring of device function in routine programming sessions as well as repeating the manufacturer's integrity test battery, was sensitive enough to detect malfunction in all suspected device failures, and each mode of device failure showed a characteristic abnormality on in situ integrity testing. Our clinical manifestation-based algorithm combined with in situ integrity testing may be useful for accurate diagnosis and appropriate management of device failure. Close monitoring of device function in routine programming sessions as well as repeating the manufacturer's integrity test battery is important if the initial in situ integrity testing is inconclusive because objective evidence of failure in the implanted device is essential to recommend explantation/reimplantation.

Simulation as a preoperative planning approach in advanced heart failure patients. A retrospective clinical analysis.

PubMed

Capoccia, Massimo; Marconi, Silvia; Singh, Sanjeet Avtaar; Pisanelli, Domenico M; De Lazzari, Claudio

2018-05-02

Modelling and simulation may become clinically applicable tools for detailed evaluation of the cardiovascular system and clinical decision-making to guide therapeutic intervention. Models based on pressure-volume relationship and zero-dimensional representation of the cardiovascular system may be a suitable choice given their simplicity and versatility. This approach has great potential for application in heart failure where the impact of left ventricular assist devices has played a significant role as a bridge to transplant and more recently as a long-term solution for non eligible candidates. We sought to investigate the value of simulation in the context of three heart failure patients with a view to predict or guide further management. CARDIOSIM © was the software used for this purpose. The study was based on retrospective analysis of haemodynamic data previously discussed at a multidisciplinary meeting. The outcome of the simulations addressed the value of a more quantitative approach in the clinical decision process. Although previous experience, co-morbidities and the risk of potentially fatal complications play a role in clinical decision-making, patient-specific modelling may become a daily approach for selection and optimisation of device-based treatment for heart failure patients. Willingness to adopt this integrated approach may be the key to further progress.

Composite laminate failure parameter optimization through four-point flexure experimentation and analysis

DOE PAGES

Nelson, Stacy; English, Shawn; Briggs, Timothy

2016-05-06

Fiber-reinforced composite materials offer light-weight solutions to many structural challenges. In the development of high-performance composite structures, a thorough understanding is required of the composite materials themselves as well as methods for the analysis and failure prediction of the relevant composite structures. However, the mechanical properties required for the complete constitutive definition of a composite material can be difficult to determine through experimentation. Therefore, efficient methods are necessary that can be used to determine which properties are relevant to the analysis of a specific structure and to establish a structure's response to a material parameter that can only be definedmore » through estimation. The objectives of this paper deal with demonstrating the potential value of sensitivity and uncertainty quantification techniques during the failure analysis of loaded composite structures; and the proposed methods are applied to the simulation of the four-point flexural characterization of a carbon fiber composite material. Utilizing a recently implemented, phenomenological orthotropic material model that is capable of predicting progressive composite damage and failure, a sensitivity analysis is completed to establish which material parameters are truly relevant to a simulation's outcome. Then, a parameter study is completed to determine the effect of the relevant material properties' expected variations on the simulated four-point flexural behavior as well as to determine the value of an unknown material property. This process demonstrates the ability to formulate accurate predictions in the absence of a rigorous material characterization effort. Finally, the presented results indicate that a sensitivity analysis and parameter study can be used to streamline the material definition process as the described flexural characterization was used for model validation.« less

Progressive Failure Analysis of Advanced Composites

DTIC Science & Technology

2008-07-25

Fracture angle. αii Coefficients of thermal expansion . βii Coefficients of hygroscopic expansion . β Shear response factor. ηL Coefficient of... thermal expansion in the longitudinal and transverse direc- tions. To enable the calculation of the thermal stresses, the user should define in the...development of this second VUMAT subroutine was planned for the second year of this project). 4.2 Input into Abaqus explicit 4.2.1 Shell elements

Application of Wear Debris Analysis to Aircraft Hydraulic Systems.

DTIC Science & Technology

1982-05-10

C. Wescott, "Predicting and Determining Failures by Means of Ferrography ", paper given at Ninth Annual FAA International Aviation Maintenance...morphological characteristics (reference (c)). In this particular effort the morphologi- cal studies were performed by means of analytical ferrography ...peak of 191,000 at 225 hours. As time progressed, the index again began to fall and returned to Ref: (c) "Wear Particle Atlas " Naval Air Engineering

Poison hemlock-induced respiratory failure in a toddler.

PubMed

West, Patrick L; Horowitz, B Zane; Montanaro, Marc T; Lindsay, James N

2009-11-01

The ingestion of poison hemlock, or Conium maculatum, is described in a 2-year-old boy. He had the onset of abdominal pain and weakness after being fed C. maculatum picked by his sister from the roadside 2 hours earlier. He had a rapidly progressive muscular weakness and was intubated for respiratory failure. His symptoms completely resolved within 24 hours of the ingestion. Conium maculatum is a common weed that causes toxicity by its primary toxin, coniine, which stimulates nicotinic receptors and causes a syndrome of rapidly progressive muscle weakness and paralysis. We describe the course of a benign-appearing plant ingestion resulting in respiratory failure.

Creating and evaluating a data-driven curriculum for central venous catheter placement.

PubMed

Duncan, James R; Henderson, Katherine; Street, Mandie; Richmond, Amy; Klingensmith, Mary; Beta, Elio; Vannucci, Andrea; Murray, David

2010-09-01

Central venous catheter placement is a common procedure with a high incidence of error. Other fields requiring high reliability have used Failure Mode and Effects Analysis (FMEA) to prioritize quality and safety improvement efforts. To use FMEA in the development of a formal, standardized curriculum for central venous catheter training. We surveyed interns regarding their prior experience with central venous catheter placement. A multidisciplinary team used FMEA to identify high-priority failure modes and to develop online and hands-on training modules to decrease the frequency, diminish the severity, and improve the early detection of these failure modes. We required new interns to complete the modules and tracked their progress using multiple assessments. Survey results showed new interns had little prior experience with central venous catheter placement. Using FMEA, we created a curriculum that focused on planning and execution skills and identified 3 priority topics: (1) retained guidewires, which led to training on handling catheters and guidewires; (2) improved needle access, which prompted the development of an ultrasound training module; and (3) catheter-associated bloodstream infections, which were addressed through training on maximum sterile barriers. Each module included assessments that measured progress toward recognition and avoidance of common failure modes. Since introducing this curriculum, the number of retained guidewires has fallen more than 4-fold. Rates of catheter-associated infections have not yet declined, and it will take time before ultrasound training will have a measurable effect. The FMEA provided a process for curriculum development. Precise definitions of failure modes for retained guidewires facilitated development of a curriculum that contributed to a dramatic decrease in the frequency of this complication. Although infections and access complications have not yet declined, failure mode identification, curriculum development, and monitored implementation show substantial promise for improving patient safety during placement of central venous catheters.

Mechanical characterization and structural analysis of recycled fiber-reinforced-polymer resin-transfer-molded beams

NASA Astrophysics Data System (ADS)

Tan, Eugene Wie Loon

1999-09-01

The present investigation was focussed on the mechanical characterization and structural analysis of resin-transfer-molded beams containing recycled fiber-reinforced polymers. The beams were structurally reinforced with continuous unidirectional glass fibers. The reinforcing filler materials consisted entirely of recycled fiber-reinforced polymer wastes (trim and overspray). The principal resin was a 100-percent dicyclo-pentadiene unsaturated polyester specially formulated with very low viscosity for resin transfer molding. Variations of the resin transfer molding technique were employed to produce specimens for material characterization. The basic materials that constituted the structural beams, continuous-glass-fiber-reinforced, recycled-trim-filled and recycled-overspray-filled unsaturated polyesters, were fully characterized in axial and transverse compression and tension, and inplane and interlaminar shear, to ascertain their strengths, ultimate strains, elastic moduli and Poisson's ratios. Experimentally determined mechanical properties of the recycled-trim-filled and recycled-overspray-filled materials from the present investigation were superior to those of unsaturated polyester polymer concretes and Portland cement concretes. Mechanical testing and finite element analyses of flexure (1 x 1 x 20 in) and beam (2 x 4 x 40 in) specimens were conducted. These structurally-reinforced specimens were tested and analyzed in four-point, third-point flexure to determine their ultimate loads, maximum fiber stresses and mid-span deflections. The experimentally determined load capacities of these specimens were compared to those of equivalent steel-reinforced Portland cement concrete beams computed using reinforced concrete theory. Mechanics of materials beam theory was utilized to predict the ultimate loads and mid-span deflections of the flexure and beam specimens. However, these predictions proved to be severely inadequate. Finite element (fracture propagation) analyses of the flexure and beam specimens were also performed. These progressive failure analyses more closely approximated flexural behavior under actual testing conditions by reducing the elastic moduli of elements that were considered to have partially or totally failed. Individual element failures were predicted using the maximum stress, Tsai-Hill and Tsai-Wu failure criteria. Excellent predictions of flexural behavior were attributed to the progressive failure analyses combined with an appropriate failure criterion, and the reliable input material properties that were generated.

Failure of flight feathers under uniaxial compression.

PubMed

Schelestow, Kristina; Troncoso, Omar P; Torres, Fernando G

2017-09-01

Flight feathers are light weight engineering structures. They have a central shaft divided in two parts: the calamus and the rachis. The rachis is a thinly walled conical shell filled with foam, while the calamus is a hollow tube-like structure. Due to the fact that bending loads are produced during birds' flight, the resistance to bending of feathers has been reported in different studies. However, the analysis of bent feathers has shown that compression could induce failure by buckling. Here, we have studied the compression of feathers in order to assess the failure mechanisms involved. Axial compression tests were carried out on the rachis and the calamus of dove and pelican feathers. The failure mechanisms and folding structures that resulted from the compression tests were observed from images obtained by scanning electron microscopy (SEM). The rachis and calamus fail due to structural instability. In the case of the calamus, this instability leads to a progressive folding process. In contrast, the rachis undergoes a typical Euler column-type buckling failure. The study of failed specimens showed that delamination buckling, cell collapse and cell densification are the primary failure mechanisms of the rachis structure. The role of the foam is also discussed with regard to the mechanical response of the samples and the energy dissipated during the compression tests. Critical stress values were calculated using delamination buckling models and were found to be in very good agreement with the experimental values measured. Failure analysis and mechanical testing have confirmed that flight feathers are complex thin walled structures with mechanical adaptations that allow them to fulfil their functions. Copyright © 2017 Elsevier B.V. All rights reserved.

Testing and analysis of flat and curved panels with multiple cracks

NASA Technical Reports Server (NTRS)

Broek, David; Jeong, David Y.; Thomson, Douglas

1994-01-01

An experimental and analytical investigation of multiple cracking in various types of test specimens is described in this paper. The testing phase is comprised of a flat unstiffened panel series and curved stiffened and unstiffened panel series. The test specimens contained various configurations for initial damage. Static loading was applied to these specimens until ultimate failure, while loads and crack propagation were recorded. This data provides the basis for developing and validating methodologies for predicting linkup of multiple cracks, progression to failure, and overall residual strength. The results from twelve flat coupon and ten full scale curved panel tests are presented. In addition, an engineering analysis procedure was developed to predict multiple crack linkup. Reasonable agreement was found between predictions and actual test results for linkup and residual strength for both flat and curved panels. The results indicate that an engineering analysis approach has the potential to quantitatively assess the effect of multiple cracks in the arrest capability of an aircraft fuselage structure.

Clinical and genetic characterization of an autosomal dominant nephropathy.

PubMed

Parvari, R; Shnaider, A; Basok, A; Katchko, L; Borochovich, Z; Kanis, A; Landau, D

2001-03-15

Autosomal dominant familial nephropathies with adult onset, no macroscopic cysts, and progressive deterioration include medullary cystic disease (ADMCKD) as well as other less specific entities. We studied a kindred of Jewish ancestry in which 15 members (both male and female) have suffered from chronic renal failure. The first evidence of renal involvement was observed between 18 and 38 years. It included hypertension followed by progressive renal insufficiency. No polyuria, anemia, gout, hematuria, nor proteinuria were seen. An average of 4.5 years elapsed from diagnosis to end-stage renal disease. Renal pathology at early stages of the disease showed extensive tubulointerstitial fibrosis and global glomerulosclerosis. Linkage analysis was performed at the two known loci of ADMCKD, on Chromosomes 1 and 16. Linkage to the chromosome 16 locus was excluded. However, linkage to the chromosome 1q21 locus of ADMCKD was established with a maximum two-point LOD score of 3.82 to D1S394. The disease interval could be narrowed to about 9 cM/7.4 Mb between D1S1156 and D1S2635. Multiple-point linkage analysis revealed a maximum LOD of 4.21, with a broad peak from markers D1S2858 and D1S2624. This report establishes linkage between a familial nephropathy characterized by hypertension and progressive renal failure to the locus described for ADMCKD, a disease classically associated with macroscopic corticomedullary cysts, salt-losing tubulointerstitial nephropathy, and anemia. This finding broadens the clinical spectrum of ADMCKD positioned on chromosome 1q21 locus. Copyright 2001 Wiley-Liss. Inc.

Single-fraction stereotactic body radiotherapy for spinal metastases from renal cell carcinoma.

PubMed

Balagamwala, Ehsan H; Angelov, Lilyana; Koyfman, Shlomo A; Suh, John H; Reddy, Chandana A; Djemil, Toufik; Hunter, Grant K; Xia, Ping; Chao, Samuel T

2012-12-01

Stereotactic body radiotherapy (SBRT) has emerged as an important treatment option for spinal metastases from renal cell carcinoma (RCC) as a means to overcome RCC's inherent radioresistance. The authors reviewed the outcomes of SBRT for the treatment of RCC metastases to the spine at their institution, and they identified factors associated with treatment failure. Fifty-seven patients (88 treatment sites) with RCC metastases to the spine received single-fraction SBRT. Pain relief was based on the Brief Pain Inventory and was adjusted for narcotic use according to the Radiation Therapy Oncology Group protocol 0631. Toxicity was scored according to Common Toxicity Criteria for Adverse Events version 4.0. Radiographic failure was defined as infield or adjacent (within 1 vertebral body [VB]) failure on follow-up MRI. Multivariate analyses were performed to correlate outcomes with the following variables: epidural, paraspinal, single-level, or multilevel disease (2-5 sites); neural foramen involvement; and VB fracture prior to SBRT. Kaplan-Meier analysis and Cox proportional hazards modeling were used for statistical analysis. The median follow-up and survival periods were 5.4 months (range 0.3-38 months) and 8.3 months (range 1.5-38 months), respectively. The median time to radiographic failure and unadjusted pain progression were 26.5 and 26.0 months, respectively. The median time to pain relief (from date of simulation) and duration of pain relief (from date of treatment) were 0.9 months (range 0.1-4.4 months) and 5.4 months (range 0.1-37.4 months), respectively. Multivariate analyses demonstrated that multilevel disease (hazard ratio [HR] 3.5, p = 0.02) and neural foramen involvement (HR 3.4, p = 0.02) were correlated with radiographic failure; multilevel disease (HR 2.3, p = 0.056) and VB fracture (HR 2.4, p = 0.046) were correlated with unadjusted pain progression. One patient experienced Grade 3 nausea and vomiting; no other Grade 3 or 4 toxicities were observed. Twelve treatment sites (14%) were complicated by subsequent vertebral fractures. Stereotactic body radiotherapy for RCC metastases to the spine offers fast and durable pain relief with minimal toxicity. Stereotactic body radiotherapy seems optimal for patients who have solitary or few spinal metastases. Patients with neural foramen involvement are at an increased risk for failure.

Endothelial dysfunction in patients with chronic heart failure is independently associated with increased incidence of hospitalization, cardiac transplantation, or death.

PubMed

Fischer, D; Rossa, S; Landmesser, U; Spiekermann, S; Engberding, N; Hornig, B; Drexler, H

2005-01-01

Endothelial dysfunction of coronary and peripheral arteries has been demonstrated in patients with chronic heart failure (CHF) and appears to be associated with functional implications. However, it is unknown whether endothelial dysfunction in CHF is independently associated with impaired outcome or progression of the disease. We assessed the follow-up of 67 consecutive patients with CHF [New York Heart Association (NYHA) functional class II-III] in which flow-dependent, endothelium-mediated vasodilation (FDD) of the radial artery was assessed by high resolution ultrasound. The primary endpoint was defined by cardiac death, hospitalization due to worsening of heart failure (NYHA class IV, pulmonary oedema), or heart transplantation. Cox regression analysis was used to determine whether FDD was associated with these heart failure-related events. During a median follow-up of 45.7 months 24 patients had an event: 18 patients were hospitalized due to worsening of heart failure or heart transplantation, six patients died for cardiac reasons. Cox regression analysis demonstrated that FDD (P<0.01), diabetes mellitus (P<0.01), and ejection fraction (P<0.01) were independent predictive factors for the occurrence of the primary endpoint. The Kaplan-Meier survival curve revealed a significantly better clinical outcome in patients with FDD above the median (6.2%) compared with those with FDD below the median (P<0.013). These observations suggest that endothelium-mediated vasodilation represents an independent predictor of cardiac death and hospitalization in patients with CHF, consistent with the notion that endothelium-derived nitric oxide may play a protective role in heart failure.

Attributions and Attitudes of Mothers and Fathers in Italy

PubMed Central

Bombi, Anna Silvia; Pastorelli, Concetta; Bacchini, Dario; Di Giunta, Laura; Miranda, Maria C.; Zelli, Arnaldo

2011-01-01

SYNOPSIS Objective The present study examined mean level similarities and differences as well as correlations between mothers’ and fathers’ attributions regarding successes and failures in caregiving situations and progressive versus authoritarian attitudes. Design Interviews were conducted with both mothers and fathers in 177 Italian families from Rome and Naples. Results Fathers’ attributions reflected higher perceived control over failure than did mothers’ attributions, whereas mothers reported attitudes that were more progressive than did fathers. Only the difference in progressive attitudes remained significant after controlling for parents’ age, education, and possible social desirability bias. Site differences emerged for four of the seven attributions and attitudes examined; three remained significant after controlling for parents’ age, education, and possible social desirability bias. Medium effect sizes were found for concordance between parents in the same family for authoritarian attitudes and modernity of attitudes after controlling for parents’ age, education, and possible social desirability bias. Conclusions This work elucidates ways that parent gender and cultural context relate to attributions regarding parents’ success and failure in caregiving situations and to progressive versus authoritarian parenting attitudes. PMID:21927586

Attributions and Attitudes of Mothers and Fathers in Italy.

PubMed

Bombi, Anna Silvia; Pastorelli, Concetta; Bacchini, Dario; Di Giunta, Laura; Miranda, Maria C; Zelli, Arnaldo

2011-07-01

OBJECTIVE: The present study examined mean level similarities and differences as well as correlations between mothers' and fathers' attributions regarding successes and failures in caregiving situations and progressive versus authoritarian attitudes. DESIGN: Interviews were conducted with both mothers and fathers in 177 Italian families from Rome and Naples. RESULTS: Fathers' attributions reflected higher perceived control over failure than did mothers' attributions, whereas mothers reported attitudes that were more progressive than did fathers. Only the difference in progressive attitudes remained significant after controlling for parents' age, education, and possible social desirability bias. Site differences emerged for four of the seven attributions and attitudes examined; three remained significant after controlling for parents' age, education, and possible social desirability bias. Medium effect sizes were found for concordance between parents in the same family for authoritarian attitudes and modernity of attitudes after controlling for parents' age, education, and possible social desirability bias. CONCLUSIONS: This work elucidates ways that parent gender and cultural context relate to attributions regarding parents' success and failure in caregiving situations and to progressive versus authoritarian parenting attitudes.

Progressive Fracture of Composite Structures

NASA Technical Reports Server (NTRS)

Chamis, Christos C.; Minnetyan, Levon

2008-01-01

A new approach is described for evaluating fracture in composite structures. This approach is independent of classical fracture mechanics parameters like fracture toughness. It relies on computational simulation and is programmed in a stand-alone integrated computer code. It is multiscale, multifunctional because it includes composite mechanics for the composite behavior and finite element analysis for predicting the structural response. It contains seven modules; layered composite mechanics (micro, macro, laminate), finite element, updating scheme, local fracture, global fracture, stress based failure modes, and fracture progression. The computer code is called CODSTRAN (Composite Durability Structural ANalysis). It is used in the present paper to evaluate the global fracture of four composite shell problems and one composite built-up structure. Results show that the composite shells and the built-up composite structure global fracture are enhanced when internal pressure is combined with shear loads.

Extracorporeal Membrane Oxygenation for Refractory Severe Respiratory Failure in Acute Interstitial Pneumonia.

PubMed

Gonçalves-Venade, Gabriela; Lacerda-Príncipe, Nuno; Roncon-Albuquerque, Roberto; Paiva, José Artur

2018-05-01

Acute interstitial pneumonia (AIP) is a rare idiopathic interstitial lung disease with rapid progressive respiratory failure and high mortality. In the present report, three cases of AIP complicated by refractory respiratory failure supported with extracorporeal membrane oxygenation (ECMO) are presented. One male and two female patients (ages 27-59) were included. Venovenous ECMO support was provided using miniaturized systems, with two-site femoro-jugular circuit configuration. Despite lung protective ventilation, prone position and neuromuscular blockade, refractory respiratory failure of unknown etiology supervened (ratio of arterial oxygen partial pressure to fractional inspired oxygen 46-130) and ECMO was initiated after 3-7 days of mechanical ventilation. AIP diagnosis was established after exclusion of infectious and noninfectious acute respiratory distress syndrome on the basis of clinical and analytical data, bronchoalveolar lavage analysis and lung imaging, with a confirmatory surgical lung biopsy revealing diffuse alveolar damage of unknown etiology. Immunosuppressive treatment consisted in high-dose corticosteroids and cyclophosphamide in one case. Two patients survived to hospital discharge. ECMO allowed AIP diagnosis and treatment in the presence of refractory respiratory failure, therefore reducing ventilator-induced lung injury and bridging lung recovery in two patients. ECMO referral should be considered in refractory respiratory failure if AIP is suspected. © 2018 International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

On-board fault management for autonomous spacecraft

NASA Technical Reports Server (NTRS)

Fesq, Lorraine M.; Stephan, Amy; Doyle, Susan C.; Martin, Eric; Sellers, Suzanne

1991-01-01

The dynamic nature of the Cargo Transfer Vehicle's (CTV) mission and the high level of autonomy required mandate a complete fault management system capable of operating under uncertain conditions. Such a fault management system must take into account the current mission phase and the environment (including the target vehicle), as well as the CTV's state of health. This level of capability is beyond the scope of current on-board fault management systems. This presentation will discuss work in progress at TRW to apply artificial intelligence to the problem of on-board fault management. The goal of this work is to develop fault management systems. This presentation will discuss work in progress at TRW to apply artificial intelligence to the problem of on-board fault management. The goal of this work is to develop fault management systems that can meet the needs of spacecraft that have long-range autonomy requirements. We have implemented a model-based approach to fault detection and isolation that does not require explicit characterization of failures prior to launch. It is thus able to detect failures that were not considered in the failure and effects analysis. We have applied this technique to several different subsystems and tested our approach against both simulations and an electrical power system hardware testbed. We present findings from simulation and hardware tests which demonstrate the ability of our model-based system to detect and isolate failures, and describe our work in porting the Ada version of this system to a flight-qualified processor. We also discuss current research aimed at expanding our system to monitor the entire spacecraft.

Circadian body temperature variability is an indicator of poor prognosis in cardiomyopathic hamsters.

PubMed

Ahmed, Amany; Gondi, Sreedevi; Cox, Casey; Wang, Suwei; Stupin, Igor V; Shankar, K J; Munir, Shahzeb M; Sobash, Ed; Brewer, Alan; Ferguson, James J; Elayda, Macarthur A; Casscells, S Ward; Wilson, James M

2010-03-01

Low body temperature is an independent predictor of poor prognosis in patients with congestive heart failure. The cardiomyopathic hamster develops progressive biventricular dysfunction, resulting in heart failure death at 9 months to 1 year of life. Our goal was to use cardiomyopathic hamsters to examine the relationship between body temperature and heart failure decompensation and death. To this end, we implanted temperature and activity transducers with telemetry into the peritoneal space of 46 male Bio-TO-2 Syrian cardiomyopathic hamsters. Multiple techniques, including computing mean temperature, frequency domain analysis, and nonlinear analysis, were used to determine the most useful method for predicting poor prognosis. Data from 44 hamsters were included in our final analysis. We detected a decline in core body temperature in 98% of the hamsters 8+/-4 days before death (P < .001). We examined the dominant frequency of temperature variation (ie, the circadian rhythm) by using cosinor analysis, which revealed a significant decrease in the amplitude of the body temperature circadian rhythm 8 weeks before death (0.28 degrees C; 95% CI, 0.26-0.31) compared to baseline (0.36 degrees C; 95% CI, 0.34-0.39; P=.005). The decline in the circadian temperature variation preceded all other evidence of decompensation. We conclude that a decrease in the amplitude of the body temperature circadian rhythm precedes fatal decompensation in cardiomyopathic hamsters. Continuous temperature monitoring may be useful in predicting preclinical decompensation in patients with heart failure and in identifying opportunities for therapeutic intervention. Copyright (c) 2010 Elsevier Inc. All rights reserved.

The Failure of Progressive Paradigm Reversal

ERIC Educational Resources Information Center

Guthrie, Gerard

2017-01-01

The student-centred, progressive paradigm has not had sustained success in changing teacher-centred, formalistic practices in "developing" country classrooms. Does "Gestalt-switch" and paradigm reversal demonstrate that progressive theory has realigned with formalistic reality, or has it remained axiomatic in the research and…

Pregnancy in fanconi anaemia with bone marrow failure: a case report and review of the literature.

PubMed

Sorbi, Flavia; Mecacci, Federico; Di Filippo, Alessandro; Fambrini, Massimiliano

2017-02-03

Fanconi anaemia is a rare inherited disease characterized by congenital abnormalities, progressive bone marrow failure and predisposition to malignancy. Successful pregnancies in transplanted patients have been reported. In this paper we will describe the pregnancy of a patient with Fanconi anaemia without transplantation. A 34-year-old nulliparous woman with Fanconi anaemia was referred to our institution. Pregnancy was complicated by progressive pancytopenia and two severe infections. C-section was performed at 36 weeks. Both infant and mother are well. Successful pregnancy in a Fanconi anaemia patient with bone marrow failure is possible. The mode of delivery in patients with bone marrow failure should be determined by obstetric indications. The case highlights the safe outcome of the pregnancy with strict clinical and laboratory control by a multidisciplinary team.

Recent progresses in outcome-dependent sampling with failure time data.

PubMed

Ding, Jieli; Lu, Tsui-Shan; Cai, Jianwen; Zhou, Haibo

2017-01-01

An outcome-dependent sampling (ODS) design is a retrospective sampling scheme where one observes the primary exposure variables with a probability that depends on the observed value of the outcome variable. When the outcome of interest is failure time, the observed data are often censored. By allowing the selection of the supplemental samples depends on whether the event of interest happens or not and oversampling subjects from the most informative regions, ODS design for the time-to-event data can reduce the cost of the study and improve the efficiency. We review recent progresses and advances in research on ODS designs with failure time data. This includes researches on ODS related designs like case-cohort design, generalized case-cohort design, stratified case-cohort design, general failure-time ODS design, length-biased sampling design and interval sampling design.

Recent progresses in outcome-dependent sampling with failure time data

PubMed Central

Ding, Jieli; Lu, Tsui-Shan; Cai, Jianwen; Zhou, Haibo

2016-01-01

An outcome-dependent sampling (ODS) design is a retrospective sampling scheme where one observes the primary exposure variables with a probability that depends on the observed value of the outcome variable. When the outcome of interest is failure time, the observed data are often censored. By allowing the selection of the supplemental samples depends on whether the event of interest happens or not and oversampling subjects from the most informative regions, ODS design for the time-to-event data can reduce the cost of the study and improve the efficiency. We review recent progresses and advances in research on ODS designs with failure time data. This includes researches on ODS related designs like case–cohort design, generalized case–cohort design, stratified case–cohort design, general failure-time ODS design, length-biased sampling design and interval sampling design. PMID:26759313

Failure: A Source of Progress in Maintenance and Design

NASA Astrophysics Data System (ADS)

Chaïb, R.; Taleb, M.; Benidir, M.; Verzea, I.; Bellaouar, A.

This approach, allows using the failure as a source of progress in maintenance and design to detect the most critical components in equipment, to determine the priority order maintenance actions to lead and direct the exploitation procedure towards the most penalizing links in this equipment, even define the necessary changes and recommendations for future improvement. Thus, appreciate the pathological behaviour of the material and increase its availability, even increase its lifespan and improve its future design. In this context and in the light of these points, the failures are important in managing the maintenance function. Indeed, it has become important to understand the phenomena of failure and degradation of equipments in order to establish an appropriate maintenance policy for the rational use of mechanical components and move to the practice of proactive maintenance [1], do maintenance at the design [2].

Damage Model and Progressive Failure Analyses for Filament Wound Composite Laminates

NASA Astrophysics Data System (ADS)

Ribeiro, Marcelo Leite; Vandepitte, Dirk; Tita, Volnei

2013-10-01

Recent improvements in manufacturing processes and materials properties associated with excellent mechanical characteristics and low weight have made composite materials very attractive for application on civil aircraft structures. However, even new designs are still very conservative, because the composite failure phenomenon is very complex. Several failure criteria and theories have been developed to describe the damage process and how it evolves, but the solution of the problem is still open. Moreover, modern filament winding techniques have been used to produce a wide variety of structural shapes not only cylindrical parts, but also “flat” laminates. Therefore, this work presents the development of a damage model and its application to simulate the progressive failure of flat composite laminates made using a filament winding process. The damage model was implemented as a UMAT (User Material Subroutine), in ABAQUSTM Finite Element (FE) framework. Progressive failure analyses were carried out using FE simulation in order to simulate the failure of flat filament wound composite structures under different loading conditions. In addition, experimental tests were performed in order to identify parameters related to the material model, as well as to evaluate both the potential and the limitations of the model. The difference between numerical and the average experimental results in a four point bending set-up is only 1.6 % at maximum load amplitude. Another important issue is that the model parameters are not so complicated to be identified. This characteristic makes this model very attractive to be applied in an industrial environment.

Epidermal growth factor receptor (EGFr) status associated with failure of primary endocrine therapy in elderly postmenopausal patients with breast cancer.

PubMed Central

Nicholson, S.; Halcrow, P.; Sainsbury, J. R.; Angus, B.; Chambers, P.; Farndon, J. R.; Harris, A. L.

1988-01-01

We have used primary endocrine therapy for 61 elderly women with operable breast cancer (median age 77 years). Eleven patients (18%) had complete and 24 (39%) partial tumour regression, 12 (20%) had stable disease for a minimum of six months and 14 (23%) no response. Salvage surgery was undertaken in the 14 with no response and 8/9 with progressive disease following initial response, thus samples were available from relapse patients only. Assays for EGFr (two point radioreceptor assay) and oestrogen receptors (ER) (dextran coated charcoal method and an immunohistochemical method) were performed on 20/22 patients. Ten of these 20 tumours were EGFr+ (greater than 10 fmol mg-1 binding) and 9/13 patients progressing within six months had EGFr+ tumours. 15/22 were available for ER evaluation and there was no such association with ER status. EGFr status was also associated with early recurrence after surgery and death in the endocrine failure group (P less than 0.005 and P less than 0.05 respectively). Of a control population of 33 patients (median age 72 years) treated by primary surgery, only 6 were EGFr+. In this group early relapse was predicted by EGFr status, but not by ER status (median disease free survival for EGFr+ patients 15 months, and for EGFr- patients 40 months, P less than 0.01, logrank test). There was a significantly higher proportion of EGFr+ tumours in the endocrine failure group compared with the control population (P less than 0.001). EGFr status is a marker for rapid early progression on primary endocrine therapy and the development of non-excisional methods of EGFr analysis would allow better directed therapeutic decisions. PMID:3224082

Patterns of relapse and prognosis after bevacizumab failure in recurrent glioblastoma

PubMed Central

Iwamoto, F M.; Abrey, L E.; Beal, K; Gutin, P H.; Rosenblum, M K.; Reuter, V E.; DeAngelis, L M.; Lassman, A B.

2009-01-01

Background: Bevacizumab has recently been approved by the US Food and Drug Administration for recurrent glioblastoma (GBM). However, patterns of relapse, prognosis, and outcome of further therapy after bevacizumab failure have not been studied systematically. Methods: We identified patients at Memorial Sloan-Kettering Cancer Center with recurrent GBM who discontinued bevacizumab because of progressive disease. Results: There were 37 patients (26 men with a median age of 54 years). The most common therapies administered concurrently with bevacizumab were irinotecan (43%) and hypofractionated reirradiation (38%). The median overall survival (OS) after progressive disease on bevacizumab was 4.5 months; 34 patients died. At the time bevacizumab was discontinued for tumor progression, 17 patients (46%) had an increase in the size of enhancement at the initial site of disease (local recurrence), 6 (16%) had a new enhancing lesion outside of the initial site of disease (multifocal), and 13 (35%) had progression of predominantly nonenhancing tumor. Factors associated with shorter OS after discontinuing bevacizumab were lower performance status and nonenhancing pattern of recurrence. Additional salvage chemotherapy after bevacizumab failure was given to 19 patients. The median progression-free survival (PFS) among these 19 patients was 2 months, the median OS was 5.2 months, and the 6-month PFS rate was 0%. Conclusions: Contrast enhanced MRI does not adequately assess disease status during bevacizumab therapy for recurrent glioblastoma (GBM). A nonenhancing tumor pattern of progression is common after treatment with bevacizumab for GBM and is correlated with worse survival. Treatments after bevacizumab failure provide only transient tumor control. GLOSSARY CA9 = carbonic anhydrase 9; CI = confidence interval; FDG = [18F]fluorodeoxyglucose; FLAIR = fluid-attenuation inversion recovery; GBM = glioblastoma; HIF-1 α = hypoxia-inducible factor 1α; KPS = Karnofsky performance status; MR = magnetic resonance; OS = overall survival; PFS = progression-free survival; TMZ = temozolomide; VEGF = vascular endothelial growth factor; VEGFR = vascular endothelial growth factor receptor. PMID:19822869

Structural health monitoring and damage evaluation for steel confined reinforced concrete column using the acoustic emission technique

NASA Astrophysics Data System (ADS)

Du, Fangzhu; Li, Dongsheng

2018-03-01

As a new kind of composite structures, the using of steel confined reinforced concrete column attract increasing attention in civil engineer. During the damage process, this new structure offers highly complex and invisible failure mechanism due to the combination effects of steel tubes, concrete, and steel rebar. Acoustic emission (AE) technique has been extensively studied in nondestructive testing (NDT) and is currently applied in civil engineering for structural health monitoring (SHM) and damage evaluation. In the present study, damage property and failure evolution of steel confined and unconfined reinforced concrete (RC) columns are investigated under quasi-static loading through (AE) signal. Significantly improved loading capacity and excellent energy dissipation characteristic demonstrated the practicality of that proposed structure. AE monitoring results indicated that the progressive deformation of the test specimens occur in three stages representing different damage conditions. Sentry function compares the logarithm ratio between the stored strain energy (Es) and the released acoustic energy (Ea); explicitly disclose the damage growth and failure mechanism of the test specimens. Other extended AE features including index of damage (ID), and relax ratio are calculated to quantitatively evaluate the damage severity and critical point. Complicated temporal evolution of different AE features confirms the potential importance of integrated analysis of two or more parameters. The proposed multi-indicators analysis is capable of revealing the damage growth and failure mechanism for steel confined RC columns, and providing critical warning information for structure failure.

Teachers' Perceptions of and Solutions for Student School Failure

ERIC Educational Resources Information Center

Maksic, Slavica

2015-01-01

School failure is an important aspect of students' development and their progression through the process of education, as well as for the functioning of the education system itself. The paper reports the results of a qualitative study exploring the relationship between primary school teachers' perceptions of student school failure and the…

Development of a Novel Method to Detect Prostate Cancer Circulating Tumor Cells (CTCs) Based on Epithelial-Mesenchymal Transition Biology

DTIC Science & Technology

2014-12-01

castration-resistant prostate cancer (CRPC), although at vari- able rates [2, 3]. The mechanisms underlying castration- resistant progression are...semination leads to pathological fractures , anemia, bone mar- row failure, fatigue, cachexia, progressive pain, and failure to thrive, hallmarks of the...chemotherapy, and survival often ə year. While NED accounts for a large minority (perhaps 25 %) of aggressive CRPC [21], other mechanisms of EP leading to

Meso-Scale Progressive Damage Behavior Characterization of Triaxial Braided Composites under Quasi-Static Tensile Load

NASA Astrophysics Data System (ADS)

Ren, Yiru; Zhang, Songjun; Jiang, Hongyong; Xiang, Jinwu

2018-04-01

Based on continuum damage mechanics (CDM), a sophisticated 3D meso-scale finite element (FE) model is proposed to characterize the progressive damage behavior of 2D Triaxial Braided Composites (2DTBC) with 60° braiding angle under quasi-static tensile load. The modified Von Mises strength criterion and 3D Hashin failure criterion are used to predict the damage initiation of the pure matrix and fiber tows. A combining interface damage and friction constitutive model is applied to predict the interface damage behavior. Murakami-Ohno stiffness degradation scheme is employed to predict the damage evolution process of each constituent. Coupling with the ordinary and translational symmetry boundary conditions, the tensile elastic response including tensile strength and failure strain of 2DTBC are in good agreement with the available experiment data. The numerical results show that the main failure modes of the composites under axial tensile load are pure matrix cracking, fiber and matrix tension failure in bias fiber tows, matrix tension failure in axial fiber tows and interface debonding; the main failure modes of the composites subjected to transverse tensile load are free-edge effect, matrix tension failure in bias fiber tows and interface debonding.

Flexural Progressive Failure of Carbon/Glass Interlayer and Intralayer Hybrid Composites.

PubMed

Wang, Qingtao; Wu, Weili; Gong, Zhili; Li, Wei

2018-04-17

The flexural progressive failure modes of carbon fiber and glass fiber (C/G) interlayer and intralayer hybrid composites were investigated in this work. Results showed that the bending failure modes for interlayer hybrid composites are determined by the layup structure. Besides, the bending failure is characterized by the compression failure of the upper layer, when carbon fiber tends to distribute in the upper layer, the interlayer hybrid composite fails early, the failure force is characterized by a multi-stage slightly fluctuating decline and the fracture area exhibits a diamond shape. While carbon fiber distributes in the middle or bottom layer, the failure time starts late, and the failure process exhibits one stage sharp force/stress drop, the fracture zone of glass fiber above the carbon layers presents an inverted trapezoid shape, while the fracture of glass fiber below the carbon layers exhibits an inverted triangular shape. With regards to the intralayer hybrid composites, the C/G hybrid ratio plays a dominating role in the bending failure which could be considered as the mixed failures of four structures. The bending failure of intralayer hybrid composites occurs in advance since carbon fiber are located in each layer; the failure process shows a multi-stage fluctuating decline, and the decline slows down as carbon fiber content increases, and the fracture sound release has the characteristics of a low intensity and high frequency for a long time. By contrast, as glass fiber content increases, the bending failure of intralayer composites is featured with a multi-stage cliff decline with a high amplitude and low frequency for a short-time fracture sound release.

Risk of isolated nodal failure for non-small cell lung cancer (NSCLC) treated with the elective nodal irradiation (ENI) using 3D-conformal radiotherapy (3D-CRT) techniques--a retrospective analysis.

PubMed

Kepka, Lucyna; Bujko, Krzysztof; Zolciak-Siwinska, Agnieszka

2008-01-01

To estimate retrospectively the rate of isolated nodal failures (INF) in NSCLC patients treated with the elective nodal irradiation (ENI) using 3D-conformal radiotherapy (3D-CRT). One hundred and eighty-five patients with I-IIIB stage treated with 3D-CRT in consecutive clinical trials differing in an extent of the ENI were analyzed. According to the extent of the ENI, two groups were distinguished: extended (n = 124) and limited (n = 61) ENI. INF was defined as regional nodal failure occurring without local progression. Cumulative Incidence of INF (CIINF) was evaluated by univariate and multivariate analysis with regard to prognostic factors. With a median follow up of 30 months, the two-year actuarial overall survival was 35%. The two-year CIINF rate was 12%. There were 16 (9%) INF, eight (6%) for extended and eight (13%) for limited ENI. In the univariate analysis bulky mediastinal disease (BMD), left side, higher N stage, and partial response to RT had a significant negative impact on the CIINF. BMD was the only independent predictor of the risk of incidence of the INF (p = 0.001). INF is more likely to occur in case of more advanced nodal status.

An Improved Design Methodology for Modeling Thick-Section Composite Structures Using a Multiscale Approach

DTIC Science & Technology

2012-09-01

Technologies. Helius was developed as a user material subroutine for ABAQUS and ANSYS (9). Through an ABAQUS plug-in and graphical interface, a...incorporated into an ABAQUS subroutine and compared to experimental data. Xie and Biggers (18) look at the effect width-to-hole-diameter ratio on open- hole...smearing-unsmearing” approach, nonlinear anisotropy, and progressive failure analysis into ABAQUS . The subroutine UMAT is used to define the

Temporal Progression of Pneumonic Plague in Blood of Nonhuman Primate: A Transcriptomic Analysis

DTIC Science & Technology

2016-03-22

urea nitrogen (BUN), Fig 2. Potentially activated and inhibited GoI-Time enriched pathways across the time course. The canonical pathways enriched by up...journal.pone.0151788 March 22, 2016 8 / 21 The quantitative measurements of Y. pestis present in the exposed animals’ blood and urine samples and...leukocytes (S5B Fig), formation of cellular inclusion bodies, synthesis of extracellular matrix, and myocardial and liver failure. Protein ubiquitination

Fatal pneumonia and empyema thoracis caused by imipenem-resistant Nocardia abscessus in a cancer patient.

PubMed

Lai, Chih-Cheng; Tsai, Hsih-Yeh; Ruan, Sheng-Yuan; Liao, Chun-Hsing; Hsueh, Po-Ren

2015-12-01

We describe a case of pneumonia and empyema thoracis caused by trimethoprim-sulfamethoxazole-susceptible, but imipenem-resistant Nocardia abscessus in a cancer patient. The isolate was confirmed to the species level by 16S rRNA sequencing analysis. The patient did not respond to antibiotic therapy, including ceftriaxone and imipenem, and died of progressing pneumonia and multiple organ failure. Copyright © 2013. Published by Elsevier B.V.

Use of volume-targeted non-invasive bilevel positive airway pressure ventilation in a patient with amyotrophic lateral sclerosis*,**

PubMed Central

Diaz-Abad, Montserrat; Brown, John Edward

2014-01-01

Amyotrophic lateral sclerosis (ALS) is a progressive neurodegenerative disease in which most patients die of respiratory failure. Although volume-targeted non-invasive bilevel positive airway pressure (BPAP) ventilation has been studied in patients with chronic respiratory failure of various etiologies, its use in ALS has not been reported. We present the case of a 66-year-old woman with ALS and respiratory failure treated with volume-targeted BPAP ventilation for 15 weeks. Weekly data downloads showed that disease progression was associated with increased respiratory muscle weakness, decreased spontaneous breathing, and increased use of non-invasive positive pressure ventilation, whereas tidal volume and minute ventilation remained relatively constant. PMID:25210968

Progressive Failure Studies of Stiffened Panels Subjected to Shear Loading

NASA Technical Reports Server (NTRS)

Ambur, Damodar R.; Jaunky, Navin; Hilburger, Mark W.; Bushnell, Dennis M. (Technical Monitor)

2002-01-01

Experimental and analytical results are presented for progressive failure of stiffened composite panels with and without a notch and subjected to in plane shear loading well into their postbuckling regime. Initial geometric imperfections are included in the finite element models. Ply damage modes such as matrix cracking, fiber-matrix shear, and fiber failure are modeled by degrading the material properties. Experimental results from the test include strain field data from video image correlation in three dimensions in addition to other strain and displacement measurements. Results from nonlinear finite element analyses are compared with experimental data. Good agreement between experimental data and numerical results are observed for the stitched stiffened composite panels studied.

Multiscale Static Analysis of Notched and Unnotched Laminates Using the Generalized Method of Cells

NASA Technical Reports Server (NTRS)

Naghipour Ghezeljeh, Paria; Arnold, Steven M.; Pineda, Evan J.; Stier, Bertram; Hansen, Lucas; Bednarcyk, Brett A.; Waas, Anthony M.

2016-01-01

The generalized method of cells (GMC) is demonstrated to be a viable micromechanics tool for predicting the deformation and failure response of laminated composites, with and without notches, subjected to tensile and compressive static loading. Given the axial [0], transverse [90], and shear [+45/-45] response of a carbon/epoxy (IM7/977-3) system, the unnotched and notched behavior of three multidirectional layups (Layup 1: [0,45,90,-45](sub 2S), Layup 2: [0,60,0](sub 3S), and Layup 3: [30,60,90,-30, -60](sub 2S)) are predicted under both tensile and compressive static loading. Matrix nonlinearity is modeled in two ways. The first assumes all nonlinearity is due to anisotropic progressive damage of the matrix only, which is modeled, using the multiaxial mixed-mode continuum damage model (MMCDM) within GMC. The second utilizes matrix plasticity coupled with brittle final failure based on the maximum principle strain criteria to account for matrix nonlinearity and failure within the Finite Element Analysis--Micromechanics Analysis Code (FEAMAC) software multiscale framework. Both MMCDM and plasticity models incorporate brittle strain- and stress-based failure criteria for the fiber. Upon satisfaction of these criteria, the fiber properties are immediately reduced to a nominal value. The constitutive response for each constituent (fiber and matrix) is characterized using a combination of vendor data and the axial, transverse, and shear responses of unnotched laminates. Then, the capability of the multiscale methodology is assessed by performing blind predictions of the mentioned notched and unnotched composite laminates response under tensile and compressive loading. Tabulated data along with the detailed results (i.e., stress-strain curves as well as damage evolution states at various ratios of strain to failure) for all laminates are presented.

Dacarbazine in combination with bevacizumab for the treatment of unresectable/metastatic melanoma: a phase II study.

PubMed

Ferrucci, Pier F; Minchella, Ida; Mosconi, Massimo; Gandini, Sara; Verrecchia, Francesco; Cocorocchio, Emilia; Passoni, Claudia; Pari, Chiara; Testori, Alessandro; Coco, Paola; Munzone, Elisabetta

2015-06-01

The combined treatment of dacarbazine with an antiangiogenic drug such as bevacizumab may potentiate the therapeutic effects of dacarbazine in metastatic melanoma (MM). Preliminary antitumour activity of dacarbazine plus bevacizumab is evaluated, together with the toxicity and safety profile, in MM patients. This prospective, open-label, phase II study included patients with previously untreated MM or unresectable melanoma. Patients received dacarbazine and bevacizumab until progressive disease or unacceptable toxicity. The primary efficacy variable was the overall response rate. The secondary efficacy parameters included duration of response, duration of stable disease, time to progression/progression-free survival, time to treatment failure and overall survival. The safety analysis included recordings of adverse events and exposure to study treatment. The intention-to-treat population included 37 patients (24 men and 13 women, mean age 54.2±13.1 years). Overall response rate was 18.9% (seven patients achieved a response) and clinical benefit was 48.6%. In patients who achieved a response, the median duration of response was 16.9 months and the median duration of stable disease was 12.5 months. The median time to progression/progression-free survival and time to treatment failure were 5.5 and 3.1 months, respectively. The median overall survival was 11.4 months. Almost all patients (94.6%) experienced at least one adverse event; however, no new area of toxicity of bevacizumab emerged. The dacarbazine/bevacizumab combination provides benefits compared with dacarbazine monotherapy in historical controls, with an acceptable safety profile. This combination appears to be a valid option in specific subgroups of patients, namely, those triple negative (BRAF, C-KIT and NRAS wild type) or with a BRAF mutation who have already received, or are not eligible for, immunomodulating or targeted agents.

Global left atrial failure in heart failure.

PubMed

Triposkiadis, Filippos; Pieske, Burkert; Butler, Javed; Parissis, John; Giamouzis, Gregory; Skoularigis, John; Brutsaert, Dirk; Boudoulas, Harisios

2016-11-01

The left atrium plays an important role in the maintenance of cardiovascular and neurohumoral homeostasis in heart failure. However, with progressive left ventricular dysfunction, left atrial (LA) dilation and mechanical failure develop, which frequently culminate in atrial fibrillation. Moreover, LA mechanical failure is accompanied by LA endocrine failure [deficient atrial natriuretic peptide (ANP) processing-synthesis/development of ANP resistance) and LA regulatory failure (dominance of sympathetic nervous system excitatory mechanisms, excessive vasopressin release) contributing to neurohumoral overactivity, vasoconstriction, and volume overload (global LA failure). The purpose of the present review is to describe the characteristics and emphasize the clinical significance of global LA failure in patients with heart failure. © 2016 The Authors. European Journal of Heart Failure © 2016 European Society of Cardiology.

Sequencing of Local Therapy Affects the Pattern of Treatment Failure and Survival in Children With Atypical Teratoid Rhabdoid Tumors of the Central Nervous System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pai Panandiker, Atmaram S., E-mail: atmaram.pai-panandiker@stjude.org; Merchant, Thomas E.; Beltran, Chris

Purpose: To assess the pattern of treatment failure associated with current therapeutic paradigms for childhood atypical teratoid rhabdoid tumors (AT/RT). Methods and Materials: Pediatric patients with AT/RT of the central nervous system treated at our institution between 1987 and 2007 were retrospectively evaluated. Overall survival (OS), progression-free survival, and cumulative incidence of local failure were correlated with age, sex, tumor location, extent of disease, and extent of surgical resection. Radiotherapy (RT) sequencing, chemotherapy, dose, timing, and volume administered after resection were also evaluated. Results: Thirty-one patients at a median age of 2.3 years at diagnosis (range, 0.45-16.87 years) were enrolledmore » into protocols that included risk- and age-stratified RT. Craniospinal irradiation with focal tumor bed boost (median dose, 54 Gy) was administered to 18 patients. Gross total resection was achieved in 16. Ten patients presented with metastases at diagnosis. RT was delayed more than 3 months in 20 patients and between 1 and 3 months in 4; 7 patients received immediate postoperative irradiation preceding high-dose alkylator-based chemotherapy. At a median follow-up of 48 months, the cumulative incidence of local treatment failure was 37.5% {+-} 9%; progression-free survival was 33.2% {+-} 10%; and OS was 53.5% {+-} 10%. Children receiving delayed RT ({>=}1 month postoperatively) were more likely to experience local failure (hazard ratio [HR] 1.23, p = 0.007); the development of distant metastases before RT increased the risk of progression (HR 3.49, p = 0.006); and any evidence of disease progressionbefore RT decreased OS (HR 20.78, p = 0.004). Disease progression occurred in 52% (11/21) of children with initially localized tumors who underwent gross total resection, and the progression rate increased proportionally with increasing delay from surgery to RT. Conclusions: Delayed RT is associated with a higher rate of local and metastatic disease progression in children with AT/RT. Current treatment regimens for pediatric patients with AT/RT are distinctly age stratified; novel protocols investigating RT volumes and sequencing are needed.« less

Railcar Roller Bearing Failure Progression Tests

DOT National Transportation Integrated Search

1982-04-01

This report describes the laboratory endurance test of six railcar roller bearings that had previously suffered physical damage or were otherwise degraded as a result of actual railroad service. Two different onboard impending bearing failure sensors...

Failures to further developing orphan medicinal products after designation granted in Europe: an analysis of marketing authorisation failures and abandoned drugs.

PubMed

Giannuzzi, Viviana; Landi, Annalisa; Bosone, Enrico; Giannuzzi, Floriana; Nicotri, Stefano; Torrent-Farnell, Josep; Bonifazi, Fedele; Felisi, Mariagrazia; Bonifazi, Donato; Ceci, Adriana

2017-09-11

The research and development process in the field of rare diseases is characterised by many well-known difficulties, and a large percentage of orphan medicinal products do not reach the marketing approval.This work aims at identifying orphan medicinal products that failed the developmental process and investigating reasons for and possible factors influencing failures. Drugs designated in Europe under Regulation (European Commission) 141/2000 in the period 2000-2012 were investigated in terms of the following failures: (1) marketing authorisation failures (refused or withdrawn) and (2) drugs abandoned by sponsors during development.Possible risk factors for failure were analysed using statistically validated methods. This study points out that 437 out of 788 designations are still under development, while 219 failed the developmental process. Among the latter, 34 failed the marketing authorisation process and 185 were abandoned during the developmental process. In the first group of drugs (marketing authorisation failures), 50% reached phase II, 47% reached phase III and 3% reached phase I, while in the second group (abandoned drugs), the majority of orphan medicinal products apparently never started the development process, since no data on 48.1% of them were published and the 3.2% did not progress beyond the non-clinical stage.The reasons for failures of marketing authorisation were: efficacy/safety issues (26), insufficient data (12), quality issues (7), regulatory issues on trials (4) and commercial reasons (1). The main causes for abandoned drugs were efficacy/safety issues (reported in 54 cases), inactive companies (25.4%), change of company strategy (8.1%) and drug competition (10.8%). No information concerning reasons for failure was available for 23.2% of the analysed products. This analysis shows that failures occurred in 27.8% of all designations granted in Europe, the main reasons being safety and efficacy issues. Moreover, the stage of development reached by drugs represents a specific risk factor for failures. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Loss of ovarian function in the VCD mouse-model of menopause leads to insulin resistance and a rapid progression into the metabolic syndrome.

PubMed

Romero-Aleshire, Melissa J; Diamond-Stanic, Maggie K; Hasty, Alyssa H; Hoyer, Patricia B; Brooks, Heddwen L

2009-09-01

Factors comprising the metabolic syndrome occur with increased incidence in postmenopausal women. To investigate the effects of ovarian failure on the progression of the metabolic syndrome, female B(6)C(3)F(1) mice were treated with 4-vinylcyclohexene diepoxide (VCD) and fed a high-fat (HF) diet for 16 wk. VCD destroys preantral follicles, causing early ovarian failure and is a well-characterized model for the gradual onset of menopause. After 12 wk on a HF diet, VCD-treated mice had developed an impaired glucose tolerance, whereas cycling controls were unaffected [12 wk AUC HF mice 13,455 +/- 643 vs. HF/VCD 17,378 +/- 1140 mg/dl/min, P < 0.05]. After 16 wk on a HF diet, VCD-treated mice had significantly higher fasting insulin levels (HF 5.4 +/- 1.3 vs. HF/VCD 10.1 +/- 1.4 ng/ml, P < 0.05) and were significantly more insulin resistant (HOMA-IR) than cycling controls on a HF diet (HF 56.2 +/- 16.7 vs. HF/VCD 113.1 +/- 19.6 mg/dl x microU/ml, P < 0.05). All mice on a HF diet gained more weight than mice on a standard diet, and weight gain in HF/VCD mice was significantly increased compared with HF cycling controls. Interestingly, even without a HF diet, progression into VCD-induced menopause caused a significant increase in cholesterol and free fatty acids. Furthermore, in mice fed a standard diet (6% fat), insulin resistance developed 4 mo after VCD-induced ovarian failure. Insulin resistance following ovarian failure (menopause) was prevented by estrogen replacement. Studies here demonstrate that ovarian failure (menopause) accelerates progression into the metabolic syndrome and that estrogen replacement prevents the onset of insulin resistance in VCD-treated mice. Thus, the VCD model of menopause provides a physiologically relevant means of studying how sex hormones influence the progression of the metabolic syndrome.

Patterns of Failure After Concurrent Bevacizumab and Hypofractionated Stereotactic Radiation Therapy for Recurrent High-Grade Glioma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shapiro, Lauren Q.; Beal, Kathryn, E-mail: bealk@mskcc.org; Goenka, Anuj

2013-03-01

Purpose: Concurrent bevacizumab with hypofractionated stereotactic radiation therapy (HSRT) is safe and effective for the treatment of recurrent high-grade gliomas (HGG). The objective of this study was to characterize the patterns of failure after this treatment regimen. Methods and Materials: Twenty-four patients with recurrent enhancing HGG were previously treated on an institutional review board-approved protocol of concurrent bevacizumab and reirradiation. Patients received 30 Gy in 5 fractions to the recurrent tumor with HSRT. Brain magnetic resonance imaging (MRI) was performed every 2 cycles, and bevacizumab was continued until clinical or radiographic tumor progression according to the criteria of Macdonald etmore » al. MRI at the time of progression was fused to the HSRT treatment plan, and the location of recurrence was classified on the basis of volume within the 95% isodose line. Outcomes based on patient characteristics, tumor grade, recurrence pattern, and best response to treatment were analyzed by the Kaplan-Meier method. Results: Twenty-two patients experienced either clinical or radiographic progression. Recurrent tumor was enhancing in 15 (71.4%) and nonenhancing in 6 (28.6%) patients. Eleven patients (52.4%) had recurrence within the radiation field, 5 patients (23.8%) had marginal recurrence, and 5 patients had recurrence outside the radiation field. Pattern of enhancement and location of failure did not correlate with overall survival or progression-free survival. Radiographic response was the only variable to significantly correlate with progression-free survival. Conclusions: Despite the promising initial response seen with the addition of HSRT to bevacizumab as salvage treatment for recurrent HGG, approximately half of patients ultimately still experience failure within the radiation field. The rate of local failure with the addition of HSRT seems to be lower than that seen with bevacizumab alone in the salvage setting. Our data underscore the radioresistance of HGG and the need for better salvage treatments.« less

Physicochemical characterization and failure analysis of military coating systems

NASA Astrophysics Data System (ADS)

Keene, Lionel Thomas

Modern military coating systems, as fielded by all branches of the U.S. military, generally consist of a diverse array of organic and inorganic components that can complicate their physicochemical analysis. These coating systems consist of VOC-solvent/waterborne automotive grade polyurethane matrix containing a variety of inorganic pigments and flattening agents. The research presented here was designed to overcome the practical difficulties regarding the study of such systems through the combined application of several cross-disciplinary techniques, including vibrational spectroscopy, electron microscopy, microtomy, ultra-fast laser ablation and optical interferometry. The goal of this research has been to determine the degree and spatial progression of weathering-induced alteration of military coating systems as a whole, as well as to determine the failure modes involved, and characterizing the impact of these failures on the physical barrier performance of the coatings. Transmission-mode Fourier Transform Infrared (FTIR) spectroscopy has been applied to cross-sections of both baseline and artificially weathered samples to elucidate weathering-induced spatial gradients to the baseline chemistry of the coatings. A large discrepancy in physical durability (as indicated by the spatial progression of these gradients) has been found between older and newer generation coatings. Data will be shown implicating silica fillers (previously considered inert) as the probable cause for this behavioral divergence. A case study is presented wherein the application of the aforementioned FTIR technique fails to predict the durability of the coating system as a whole. The exploitation of the ultra-fast optical phenomenon of femtosecond (10-15S) laser ablation is studied as a potential tool to facilitate spectroscopic depth profiling of composite materials. Finally, the interferometric technique of Phase Shifting was evaluated as a potential high-sensitivity technique applied to the problem of determining internal stress evolution in curing and aging coatings.

Intratumoral heterogeneity characterized by pretreatment PET in non-small cell lung cancer patients predicts progression-free survival on EGFR tyrosine kinase inhibitor

PubMed Central

Paeng, Jin Chul; Keam, Bhumsuk; Kim, Tae Min; Kim, Dong-Wan; Heo, Dae Seog

2018-01-01

Intratumoral heterogeneity has been suggested to be an important resistance mechanism leading to treatment failure. We hypothesized that radiologic images could be an alternative method for identification of tumor heterogeneity. We tested heterogeneity textural parameters on pretreatment FDG-PET/CT in order to assess the predictive value of target therapy. Recurred or metastatic non-small cell lung cancer (NSCLC) subjects with an activating EGFR mutation treated with either gefitinib or erlotinib were reviewed. An exploratory data set (n = 161) and a validation data set (n = 21) were evaluated, and eight parameters were selected for survival analysis. The optimal cutoff value was determined by the recursive partitioning method, and the predictive value was calculated using Harrell’s C-index. Univariate analysis revealed that all eight parameters showed an increased hazard ratio (HR) for progression-free survival (PFS). The highest HR was 6.41 (P<0.01) with co-occurrence (Co) entropy. Increased risk remained present after adjusting for initial stage, performance status (PS), and metabolic volume (MV) (aHR: 4.86, P<0.01). Textural parameters were found to have an incremental predictive value of early EGFR tyrosine kinase inhibitor (TKI) failure compared to that of the base model of the stage and PS (C-index 0.596 vs. 0.662, P = 0.02, by Co entropy). Heterogeneity textural parameters acquired from pretreatment FDG-PET/CT are highly predictive factors for PFS of EGFR TKI in EGFR-mutated NSCLC patients. These parameters are easily applicable to the identification of a subpopulation at increased risk of early EGFR TKI failure. Correlation to genomic alteration should be determined in future studies. PMID:29385152

Structural analysis of cylindrical thrust chambers, volume 1

NASA Technical Reports Server (NTRS)

Armstrong, W. H.

1979-01-01

Life predictions of regeneratively cooled rocket thrust chambers are normally derived from classical material fatigue principles. The failures observed in experimental thrust chambers do not appear to be due entirely to material fatigue. The chamber coolant walls in the failed areas exhibit progressive bulging and thinning during cyclic firings until the wall stress finally exceeds the material rupture stress and failure occurs. A preliminary analysis of an oxygen free high conductivity (OFHC) copper cylindrical thrust chamber demonstrated that the inclusion of cumulative cyclic plastic effects enables the observed coolant wall thinout to be predicted. The thinout curve constructed from the referent analysis of 10 firing cycles was extrapolated from the tenth cycle to the 200th cycle. The preliminary OFHC copper chamber 10-cycle analysis was extended so that the extrapolated thinout curve could be established by performing cyclic analysis of deformed configurations at 100 and 200 cycles. Thus the original range of extrapolation was reduced and the thinout curve was adjusted by using calculated thinout rates at 100 and 100 cycles. An analysis of the same underformed chamber model constructed of half-hard Amzirc to study the effect of material properties on the thinout curve is included.

Dystrophic heart failure blocked by membrane sealant poloxamer

NASA Astrophysics Data System (ADS)

Yasuda, Soichiro; Townsend, Dewayne; Michele, Daniel E.; Favre, Elizabeth G.; Day, Sharlene M.; Metzger, Joseph M.

2005-08-01

Dystrophin deficiency causes Duchenne muscular dystrophy (DMD) in humans, an inherited and progressive disease of striated muscle deterioration that frequently involves pronounced cardiomyopathy. Heart failure is the second leading cause of fatalities in DMD. Progress towards defining the molecular basis of disease in DMD has mostly come from studies on skeletal muscle, with comparatively little attention directed to cardiac muscle. The pathophysiological mechanisms involved in cardiac myocytes may differ significantly from skeletal myofibres; this is underscored by the presence of significant cardiac disease in patients with truncated or reduced levels of dystrophin but without skeletal muscle disease. Here we show that intact, isolated dystrophin-deficient cardiac myocytes have reduced compliance and increased susceptibility to stretch-mediated calcium overload, leading to cell contracture and death, and that application of the membrane sealant poloxamer 188 corrects these defects in vitro. In vivo administration of poloxamer 188 to dystrophic mice instantly improved ventricular geometry and blocked the development of acute cardiac failure during a dobutamine-mediated stress protocol. Once issues relating to optimal dosing and long-term effects of poloxamer 188 in humans have been resolved, chemical-based membrane sealants could represent a new therapeutic approach for preventing or reversing the progression of cardiomyopathy and heart failure in muscular dystrophy.

Progressive Damage Modeling of Durable Bonded Joint Technology

NASA Technical Reports Server (NTRS)

Leone, Frank A.; Davila, Carlos G.; Lin, Shih-Yung; Smeltzer, Stan; Girolamo, Donato; Ghose, Sayata; Guzman, Juan C.; McCarville, Duglas A.

2013-01-01

The development of durable bonded joint technology for assembling composite structures for launch vehicles is being pursued for the U.S. Space Launch System. The present work is related to the development and application of progressive damage modeling techniques to bonded joint technology applicable to a wide range of sandwich structures for a Heavy Lift Launch Vehicle. The joint designs studied in this work include a conventional composite splice joint and a NASA-patented Durable Redundant Joint. Both designs involve a honeycomb sandwich with carbon/epoxy facesheets joined with adhesively bonded doublers. Progressive damage modeling allows for the prediction of the initiation and evolution of damage. For structures that include multiple materials, the number of potential failure mechanisms that must be considered increases the complexity of the analyses. Potential failure mechanisms include fiber fracture, matrix cracking, delamination, core crushing, adhesive failure, and their interactions. The joints were modeled using Abaqus parametric finite element models, in which damage was modeled with user-written subroutines. Each ply was meshed discretely, and layers of cohesive elements were used to account for delaminations and to model the adhesive layers. Good correlation with experimental results was achieved both in terms of load-displacement history and predicted failure mechanisms.

What factors determine the severity of hepatitis A-related acute liver failure?

PubMed

Ajmera, V; Xia, G; Vaughan, G; Forbi, J C; Ganova-Raeva, L M; Khudyakov, Y; Opio, C K; Taylor, R; Restrepo, R; Munoz, S; Fontana, R J; Lee, W M

2011-07-01

The reason(s) that hepatitis A virus (HAV) infection may progress infrequently to acute liver failure are poorly understood. We examined host and viral factors in 29 consecutive adult patients with HAV-associated acute liver failure enrolled at 10 sites participating in the US ALF Study Group. Eighteen of twenty-four acute liver failure sera were PCR positive while six had no detectable virus. HAV genotype was determined using phylogenetic analysis and the full-length genome sequences of the HAV from a cute liver failure sera were compared to those from self-limited acute HAV cases selected from the CDC database. We found that rates of nucleotide substitution did not vary significantly between the liver failure and non-liver failure cases and there was no significant variation in amino acid sequences between the two groups. Four of 18 HAV isolates were sub-genotype IB, acquired from the same study site over a 3.5-year period. Sub-genotype IB was found more frequently among acute liver failure cases compared to the non-liver failure cases (chi-square test, P < 0.01). At another centre, a mother and her son presented with HAV and liver failure within 1 month of each other. Predictors of spontaneous survival included detectable serum HAV RNA, while age, gender, HAV genotype and nucleotide substitutions were not associated with outcome. The more frequent appearance of rapid viral clearance and its association with poor outcomes in acute liver failure as well as the finding of familial cases imply a possible host genetic predisposition that contributes to a fulminant course. Recurrent cases of the rare sub-genotype IB over several years at a single centre imply a community reservoir of infection and possible increased pathogenicity of certain infrequent viral genotypes. © 2010 Blackwell Publishing Ltd.

What factors determine the severity of hepatitis A-related acute liver failure?

PubMed Central

Ajmera, V.; Xia, G.; Vaughan, G.; Forbi, J. C.; Ganova-Raeva, L. M.; Khudyakov, Y.; Opio, C. K.; Taylor, R.; Restrepo, R.; Munoz, S.; Fontana, R. J.; Lee, W. M.

2016-01-01

SUMMARY The reason(s) that hepatitis A virus (HAV) infection may progress infrequently to acute liver failure are poorly understood. We examined host and viral factors in 29 consecutive adult patients with HAV-associated acute liver failure enrolled at 10 sites participating in the US ALF Study Group. Eighteen of twenty-four acute liver failure sera were PCR positive while six had no detectable virus. HAV genotype was determined using phylogenetic analysis and the full-length genome sequences of the HAV from a cute liver failure sera were compared to those from self-limited acute HAV cases selected from the CDC database. We found that rates of nucleotide substitution did not vary significantly between the liver failure and non-liver failure cases and there was no significant variation in amino acid sequences between the two groups. Four of 18 HAV isolates were subgenotype IB, acquired from the same study site over a 3.5-year period. Sub-genotype IB was found more frequently among acute liver failure cases compared to the non-liver failure cases (chi-square test, P < 0.01). At another centre, a mother and her son presented with HAV and liver failure within 1 month of each other. Predictors of spontaneous survival included detectable serum HAV RNA, while age, gender, HAV genotype and nucleotide substitutions were not associated with outcome. The more frequent appearance of rapid viral clearance and its association with poor outcomes in acute liver failure as well as the finding of familial cases imply a possible host genetic predisposition that contributes to a fulminant course. Recurrent cases of the rare subgenotype IB over several years at a single centre imply a community reservoir of infection and possible increased pathogenicity of certain infrequent viral genotypes. PMID:21143345

Yohimbine-induced cutaneous drug eruption, progressive renal failure, and lupus-like syndrome.

PubMed

Sandler, B; Aronson, P

1993-04-01

Yohimbine is an indole alkaloid obtained from the yohimbe tree, a common tree in West Africa. We describe a forty-two-year black man in whom a generalized erythrodermic skin eruption, progressive renal failure, and lupus-like syndrome developed following treatment with the drug, yohimbine. A literature review failed to reveal any reported association of these side effects. We review current information on yohimbine's use in male impotence, reported side effects, and its role as a drug allergen.

Education Data in Conflict-Affected Countries: The Fifth Failure?

ERIC Educational Resources Information Center

Montjourides, Patrick

2013-01-01

Poor-quality, or completely absent, data deny millions of children the right to an education. This is often the case in conflict-ridden areas. The 2011 Education for All Global Monitoring Report (UNESCO 2011b) identified four failures that are holding back progress in education and damaging millions of children's lives: failures of protection,…

Simulation for Prediction of Entry Article Demise (SPEAD): An Analysis Tool for Spacecraft Safety Analysis and Ascent/Reentry Risk Assessment

NASA Technical Reports Server (NTRS)

Ling, Lisa

2014-01-01

For the purpose of performing safety analysis and risk assessment for a potential off-nominal atmospheric reentry resulting in vehicle breakup, a synthesis of trajectory propagation coupled with thermal analysis and the evaluation of node failure is required to predict the sequence of events, the timeline, and the progressive demise of spacecraft components. To provide this capability, the Simulation for Prediction of Entry Article Demise (SPEAD) analysis tool was developed. The software and methodology have been validated against actual flights, telemetry data, and validated software, and safety/risk analyses were performed for various programs using SPEAD. This report discusses the capabilities, modeling, validation, and application of the SPEAD analysis tool.

DIVA V2.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

CHEN, JOANNA; SIMIRENKO, LISA; TAPASWI, MANJIRI

The DIVA software interfaces a process in which researchers design their DNA with a web-based graphical user interface, submit their designs to a central queue, and a few weeks later receive their sequence-verified clonal constructs. Each researcher independently designs the DNA to be constructed with a web-based BioCAD tool, and presses a button to submit their designs to a central queue. Researchers have web-based access to their DNA design queues, and can track the progress of their submitted designs as they progress from "evaluation", to "waiting for reagents", to "in progress", to "complete". Researchers access their completed constructs through themore » central DNA repository. Along the way, all DNA construction success/failure rates are captured in a central database. Once a design has been submitted to the queue, a small number of dedicated staff evaluate the design for feasibility and provide feedback to the responsible researcher if the design is either unreasonable (e.g., encompasses a combinatorial library of a billion constructs) or small design changes could significantly facilitate the downstream implementation process. The dedicated staff then use DNA assembly design automation software to optimize the DNA construction process for the design, leveraging existing parts from the DNA repository where possible and ordering synthetic DNA where necessary. SynTrack software manages the physical locations and availability of the various requisite reagents and process inputs (e.g., DNA templates). Once all requisite process inputs are available, the design progresses from "waiting for reagents" to "in progress" in the design queue. Human-readable and machine-parseable DNA construction protocols output by the DNA assembly design automation software are then executed by the dedicated staff exploiting lab automation devices wherever possible. Since the all employed DNA construction methods are sequence-agnostic, standardized (utilize the same enzymatic master mixes and reaction conditions), completely independent DNA construction tasks can be aggregated into the same multi-well plates and pursued in parallel. The resulting sets of cloned constructs can then be screened by high-throughput next-gen sequencing platforms for sequence correctness. A combination of long read-length (e.g., PacBio) and paired-end read platforms (e.g., Illumina) would be exploited depending the particular task at hand (e.g., PacBio might be sufficient to screen a set of pooled constructs with significant gene divergence). Post sequence verification, designs for which at least one correct clone was identified will progress to a "complete" status, while designs for which no correct clones wereidentified will progress to a "failure" status. Depending on the failure mode (e.g., no transformants), and how many prior attempts/variations of assembly protocol have been already made for a given design, subsequent attempts may be made or the design can progress to a "permanent failure" state. All success and failure rate information will be captured during the process, including at which stage a given clonal construction procedure failed (e.g., no PCR product) and what the exact failure was (e.g. assembly piece 2 missing). This success/failure rate data can be leveraged to refine the DNA assembly design process.« less

Multi-Scale Impact and Compression-After-Impact Modeling of Reinforced Benzoxazine/Epoxy Composites using Micromechanics Approach

NASA Astrophysics Data System (ADS)

Montero, Marc Villa; Barjasteh, Ehsan; Baid, Harsh K.; Godines, Cody; Abdi, Frank; Nikbin, Kamran

A multi-scale micromechanics approach along with finite element (FE) model predictive tool is developed to analyze low-energy-impact damage footprint and compression-after-impact (CAI) of composite laminates which is also tested and verified with experimental data. Effective fiber and matrix properties were reverse-engineered from lamina properties using an optimization algorithm and used to assess damage at the micro-level during impact and post-impact FE simulations. Progressive failure dynamic analysis (PFDA) was performed for a two step-process simulation. Damage mechanisms at the micro-level were continuously evaluated during the analyses. Contribution of each failure mode was tracked during the simulations and damage and delamination footprint size and shape were predicted to understand when, where and why failure occurred during both impact and CAI events. The composite laminate was manufactured by the vacuum infusion of the aero-grade toughened Benzoxazine system into the fabric preform. Delamination footprint was measured using C-scan data from the impacted panels and compared with the predicated values obtained from proposed multi-scale micromechanics coupled with FE analysis. Furthermore, the residual strength was predicted from the load-displacement curve and compared with the experimental values as well.

Why fish oil fails: a comprehensive 21st century lipids-based physiologic analysis.

PubMed

Peskin, B S

2014-01-01

The medical community suffered three significant fish oil failures/setbacks in 2013. Claims that fish oil's EPA/DHA would stop the progression of heart disease were crushed when The Risk and Prevention Study Collaborative Group (Italy) released a conclusive negative finding regarding fish oil for those patients with high risk factors but no previous myocardial infarction. Fish oil failed in all measures of CVD prevention-both primary and secondary. Another major 2013 setback occurred when fish oil's DHA was shown to significantly increase prostate cancer in men, in particular, high-grade prostate cancer, in the Selenium and Vitamin E Cancer Prevention Trial (SELECT) analysis by Brasky et al. Another monumental failure occurred in 2013 whereby fish oil's EPA/DHA failed to improve macular degeneration. In 2010, fish oil's EPA/DHA failed to help Alzheimer's victims, even those with low DHA levels. These are by no means isolated failures. The promise of fish oil and its so-called active ingredients EPA / DHA fails time and time again in clinical trials. This lipids-based physiologic review will explain precisely why there should have never been expectation for success. This review will focus on underpublicized lipid science with a focus on physiology.

The challenge of measuring emergency preparedness: integrating component metrics to build system-level measures for strategic national stockpile operations.

PubMed

Jackson, Brian A; Faith, Kay Sullivan

2013-02-01

Although significant progress has been made in measuring public health emergency preparedness, system-level performance measures are lacking. This report examines a potential approach to such measures for Strategic National Stockpile (SNS) operations. We adapted an engineering analytic technique used to assess the reliability of technological systems-failure mode and effects analysis-to assess preparedness. That technique, which includes systematic mapping of the response system and identification of possible breakdowns that affect performance, provides a path to use data from existing SNS assessment tools to estimate likely future performance of the system overall. Systems models of SNS operations were constructed and failure mode analyses were performed for each component. Linking data from existing assessments, including the technical assistance review and functional drills, to reliability assessment was demonstrated using publicly available information. The use of failure mode and effects estimates to assess overall response system reliability was demonstrated with a simple simulation example. Reliability analysis appears an attractive way to integrate information from the substantial investment in detailed assessments for stockpile delivery and dispensing to provide a view of likely future response performance.

Why Fish Oil Fails: A Comprehensive 21st Century Lipids-Based Physiologic Analysis

PubMed Central

Peskin, B. S.

2014-01-01

The medical community suffered three significant fish oil failures/setbacks in 2013. Claims that fish oil's EPA/DHA would stop the progression of heart disease were crushed when The Risk and Prevention Study Collaborative Group (Italy) released a conclusive negative finding regarding fish oil for those patients with high risk factors but no previous myocardial infarction. Fish oil failed in all measures of CVD prevention—both primary and secondary. Another major 2013 setback occurred when fish oil's DHA was shown to significantly increase prostate cancer in men, in particular, high-grade prostate cancer, in the Selenium and Vitamin E Cancer Prevention Trial (SELECT) analysis by Brasky et al. Another monumental failure occurred in 2013 whereby fish oil's EPA/DHA failed to improve macular degeneration. In 2010, fish oil's EPA/DHA failed to help Alzheimer's victims, even those with low DHA levels. These are by no means isolated failures. The promise of fish oil and its so-called active ingredients EPA / DHA fails time and time again in clinical trials. This lipids-based physiologic review will explain precisely why there should have never been expectation for success. This review will focus on underpublicized lipid science with a focus on physiology. PMID:24551453

The Effect of Scale Dependent Discretization on the Progressive Failure of Composite Materials Using Multiscale Analyses

NASA Technical Reports Server (NTRS)

Ricks, Trenton M.; Lacy, Thomas E., Jr.; Pineda, Evan J.; Bednarcyk, Brett A.; Arnold, Steven M.

2013-01-01

A multiscale modeling methodology, which incorporates a statistical distribution of fiber strengths into coupled micromechanics/ finite element analyses, is applied to unidirectional polymer matrix composites (PMCs) to analyze the effect of mesh discretization both at the micro- and macroscales on the predicted ultimate tensile (UTS) strength and failure behavior. The NASA code FEAMAC and the ABAQUS finite element solver were used to analyze the progressive failure of a PMC tensile specimen that initiates at the repeating unit cell (RUC) level. Three different finite element mesh densities were employed and each coupled with an appropriate RUC. Multiple simulations were performed in order to assess the effect of a statistical distribution of fiber strengths on the bulk composite failure and predicted strength. The coupled effects of both the micro- and macroscale discretizations were found to have a noticeable effect on the predicted UTS and computational efficiency of the simulations.

A Multiscale, Nonlinear, Modeling Framework Enabling the Design and Analysis of Composite Materials and Structures

NASA Technical Reports Server (NTRS)

Bednarcyk, Brett A.; Arnold, Steven M.

2012-01-01

A framework for the multiscale design and analysis of composite materials and structures is presented. The ImMAC software suite, developed at NASA Glenn Research Center, embeds efficient, nonlinear micromechanics capabilities within higher scale structural analysis methods such as finite element analysis. The result is an integrated, multiscale tool that relates global loading to the constituent scale, captures nonlinearities at this scale, and homogenizes local nonlinearities to predict their effects at the structural scale. Example applications of the multiscale framework are presented for the stochastic progressive failure of a SiC/Ti composite tensile specimen and the effects of microstructural variations on the nonlinear response of woven polymer matrix composites.

A Multiscale, Nonlinear, Modeling Framework Enabling the Design and Analysis of Composite Materials and Structures

NASA Technical Reports Server (NTRS)

Bednarcyk, Brett A.; Arnold, Steven M.

2011-01-01

A framework for the multiscale design and analysis of composite materials and structures is presented. The ImMAC software suite, developed at NASA Glenn Research Center, embeds efficient, nonlinear micromechanics capabilities within higher scale structural analysis methods such as finite element analysis. The result is an integrated, multiscale tool that relates global loading to the constituent scale, captures nonlinearities at this scale, and homogenizes local nonlinearities to predict their effects at the structural scale. Example applications of the multiscale framework are presented for the stochastic progressive failure of a SiC/Ti composite tensile specimen and the effects of microstructural variations on the nonlinear response of woven polymer matrix composites.

Forensic analysis of rockfall scars

NASA Astrophysics Data System (ADS)

de Vilder, Saskia J.; Rosser, Nick J.; Brain, Matthew J.

2017-10-01

We characterise and analyse the detachment (scar) surfaces of rockfalls to understand the mechanisms that underpin their failure. Rockfall scars are variously weathered and comprised of both discontinuity release surfaces and surfaces indicative of fracturing through zones of previously intact rock, known as rock bridges. The presence of rock bridges and pre-existing discontinuities is challenging to quantify due to the difficulty in determining discontinuity persistence below the surface of a rock slope. Rock bridges form an important control in holding blocks onto rockslopes, with their frequency, extent and location commonly modelled from the surface exposure of daylighting discontinuities. We explore an alternative approach to assessing their role, by characterising failure scars. We analyse a database of multiple rockfall scar surfaces detailing the areal extent, shape, and location of broken rock bridges and weathered surfaces. Terrestrial laser scanning and gigapixel imagery were combined to record the detailed texture and surface morphology. From this, scar surfaces were mapped via automated classification based on RGB pixel values. Our analysis of the resulting data from scars on the North Yorkshire coast (UK) indicates a wide variation in both weathering and rock bridge properties, controlled by lithology and associated rock mass structure. Importantly, the proportion of rock bridges in a rockfall failure surface does not increase with failure size. Rather larger failures display fracturing through multiple rock bridges, and in contrast smaller failures fracture occurs only through a single critical rock bridge. This holds implications for how failure mechanisms change with rockfall size and shape. Additionally, the location of rock bridges with respect to the geometry of an incipient rockfall is shown to determine failure mode. Weathering can occur both along discontinuity surfaces and previously broken rock bridges, indicating the sequential stages of progressively detaching rockfall. Our findings have wider implications for hazard assessment where rock slope stability is dependent on the nature of rock bridges, how this is accounted for in slope stability modelling, and the implications of rock bridges on long-term rock slope evolution.

[Rapidly progressive glomerulonephritis: a diagnostic and therapeutic emergency].

PubMed

Halfon, Matthieu; Teta, Daniel; Rotman, Samuel; Pruijm, Menno; Humbert, Antoine

2014-02-26

Rapidly progressive glomerulonephritis (RPG) is a rare clinical syndrome characterized by kidney damage that can lead to irreversible kidney failure. RPG can be caused by primary glomerular disease or can be part of a systemic autoimmune disorder. All RPG have a similar pathophysiology (proliferation of cells in Bowman's capsule and formation of crescents) and clinical evolution (rapidly progressive kidney failure with proteinuria and an active urine sediment). Immunosuppressive therapy and sometimes plasma exchanges are required. Overall- and kidney survival are closely linked to the blood creatinine level at presentation, the percentage of damaged glomeruli, and to the underlying cause. RPG is therefore a diagnostic and therapeutic emergency that needs quick referral to a nephrologist.

Cohesive Laws and Progressive Damage Analysis of Composite Bonded Joints, a Combined Numerical/Experimental Approach

NASA Technical Reports Server (NTRS)

Girolamo, Donato; Davila, Carlos G.; Leone, Frank A.; Lin, Shih-Yung

2015-01-01

The results of an experimental/numerical campaign aimed to develop progressive damage analysis (PDA) tools for predicting the strength of a composite bonded joint under tensile loads are presented. The PDA is based on continuum damage mechanics (CDM) to account for intralaminar damage, and cohesive laws to account for interlaminar and adhesive damage. The adhesive response is characterized using standard fracture specimens and digital image correlation (DIC). The displacement fields measured by DIC are used to calculate the J-integrals, from which the associated cohesive laws of the structural adhesive can be derived. A finite element model of a sandwich conventional splice joint (CSJ) under tensile loads was developed. The simulations, in agreement with experimental tests, indicate that the model is capable of predicting the interactions of damage modes that lead to the failure of the joint.

Multiscale Multifunctional Progressive Fracture of Composite Structures

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Minnetyan, L.

2012-01-01

A new approach is described for evaluating fracture in composite structures. This approach is independent of classical fracture mechanics parameters like fracture toughness. It relies on computational simulation and is programmed in a stand-alone integrated computer code. It is multiscale, multifunctional because it includes composite mechanics for the composite behavior and finite element analysis for predicting the structural response. It contains seven modules; layered composite mechanics (micro, macro, laminate), finite element, updating scheme, local fracture, global fracture, stress based failure modes, and fracture progression. The computer code is called CODSTRAN (Composite Durability Structural ANalysis). It is used in the present paper to evaluate the global fracture of four composite shell problems and one composite built-up structure. Results show that the composite shells. Global fracture is enhanced when internal pressure is combined with shear loads. The old reference denotes that nothing has been added to this comprehensive report since then.

Kinetics, prognostic and predictive values of ESR1 circulating mutations in metastatic breast cancer patients progressing on aromatase inhibitor

PubMed Central

Clatot, Florian; Perdrix, Anne; Augusto, Laetitia; Beaussire, Ludivine; Delacour, Julien; Calbrix, Céline; Sefrioui, David; Viailly, Pierre-Julien; Bubenheim, Michael; Moldovan, Cristian; Alexandru, Cristina; Tennevet, Isabelle; Rigal, Olivier; Guillemet, Cécile; Leheurteur, Marianne; Gouérant, Sophie; Petrau, Camille; Théry, Jean-Christophe; Picquenot, Jean-Michel; Veyret, Corinne; Frébourg, Thierry; Jardin, Fabrice

2016-01-01

Purpose To assess the prognostic and predictive value of circulating ESR1 mutation and its kinetics before and after progression on aromatase inhibitor (AI) treatment. Patients and methods ESR1 circulating D538G and Y537S/N/C mutations were retrospectively analyzed by digital droplet PCR after first-line AI failure in patients treated consecutively from 2010 to 2012 for hormone receptor-positive metastatic breast cancer. Progression-free survival (PFS) and overall survival (OS) were analyzed according to circulating mutational status and subsequent lines of treatment. The kinetics of ESR1 mutation before (3 and 6 months) and after (3 months) AI progression were determined in the available archive plasmas. Results Circulating ESR1 mutations were found at AI progression in 44/144 patients included (30.6%). Median follow-up from AI initiation was 40 months (range 4-94). The median OS was decreased in patients with circulating ESR1 mutation than in patients without mutation (15.5 versus 23.8 months, P=0.0006). The median PFS was also significantly decreased in patients with ESR1 mutation than in patients without mutation (5.9 vs 7 months, P=0.002). After AI failure, there was no difference in outcome for patients receiving chemotherapy (n = 58) versus non-AI endocrine therapy (n=51) in patients with and without ESR1 mutation. ESR1 circulating mutations were detectable in 75% of all cases before AI progression, whereas the kinetics 3 months after progression did not correlate with outcome. Conclusion ESR1 circulating mutations are independent risk factors for poor outcome after AI failure, and are frequently detectable before clinical progression. Interventional studies based on ESR1 circulating status are warranted. PMID:27801670

Kinetics, prognostic and predictive values of ESR1 circulating mutations in metastatic breast cancer patients progressing on aromatase inhibitor.

PubMed

Clatot, Florian; Perdrix, Anne; Augusto, Laetitia; Beaussire, Ludivine; Delacour, Julien; Calbrix, Céline; Sefrioui, David; Viailly, Pierre-Julien; Bubenheim, Michael; Moldovan, Cristian; Alexandru, Cristina; Tennevet, Isabelle; Rigal, Olivier; Guillemet, Cécile; Leheurteur, Marianne; Gouérant, Sophie; Petrau, Camille; Théry, Jean-Christophe; Picquenot, Jean-Michel; Veyret, Corinne; Frébourg, Thierry; Jardin, Fabrice; Sarafan-Vasseur, Nasrin; Di Fiore, Frédéric

2016-11-15

To assess the prognostic and predictive value of circulating ESR1 mutation and its kinetics before and after progression on aromatase inhibitor (AI) treatment. ESR1 circulating D538G and Y537S/N/C mutations were retrospectively analyzed by digital droplet PCR after first-line AI failure in patients treated consecutively from 2010 to 2012 for hormone receptor-positive metastatic breast cancer. Progression-free survival (PFS) and overall survival (OS) were analyzed according to circulating mutational status and subsequent lines of treatment. The kinetics of ESR1 mutation before (3 and 6 months) and after (3 months) AI progression were determined in the available archive plasmas. Circulating ESR1 mutations were found at AI progression in 44/144 patients included (30.6%). Median follow-up from AI initiation was 40 months (range 4-94). The median OS was decreased in patients with circulating ESR1 mutation than in patients without mutation (15.5 versus 23.8 months, P=0.0006). The median PFS was also significantly decreased in patients with ESR1 mutation than in patients without mutation (5.9 vs 7 months, P=0.002). After AI failure, there was no difference in outcome for patients receiving chemotherapy (n = 58) versus non-AI endocrine therapy (n=51) in patients with and without ESR1 mutation. ESR1 circulating mutations were detectable in 75% of all cases before AI progression, whereas the kinetics 3 months after progression did not correlate with outcome. ESR1 circulating mutations are independent risk factors for poor outcome after AI failure, and are frequently detectable before clinical progression. Interventional studies based on ESR1 circulating status are warranted.

A preliminary analysis of failure mechanisms in karst and man-made underground caves in Southern Italy

NASA Astrophysics Data System (ADS)

Parise, M.; Lollino, P.

2011-11-01

Natural and anthropogenic caves may represent a potential hazard for the built environment, due to the occurrence of instability within caves, that may propagate upward and eventually reach the ground surface, inducing the occurrence of sinkholes. In particular, when caves are at shallow depth, the effects at the ground surface may be extremely severe. Apulia region (southern Italy) hosts many sites where hazard associated with sinkholes is very serious due to presence of both natural karst caves and anthropogenic cavities, the latter being mostly represented by underground quarries. The Pliocene-Pleistocene calcarenite (a typical soft rock) was extensively quarried underground, by digging long and complex networks of tunnels. With time, these underground activities have progressively been abandoned and their memory lost, so that many Apulian towns are nowadays located just above the caves, due to urban expansion in the last decades. Therefore, a remarkable risk exists for society, which should not be left uninvestigated. The present contribution deals with the analysis of the most representative failure mechanisms observed in the field for such underground instability processes and the factors that seem to influence the processes, as for example those causing weathering of the rock and the consequent degradation of its physical and mechanical properties. Aimed at exploring the progression of instability of the cavities, numerical analyses have been developed by using both the finite element method for geological settings represented by continuous soft rock mass, and the distinct element method for jointed rock mass conditions. Both the effects of local instability processes occurring underground and the effects of the progressive enlargement of the caves on the overall stability of the rock mass have been investigated, along with the consequent failure mechanisms. In particular, degradation processes of the rock mass, as a consequence of wetting and weathering phenomena in the areas surrounding the caves, have been simulated. The results obtained from the numerical simulations have then been compared with what has been observed during field surveys and a satisfactory agreement between the numerical simulations and the instability processes, as detected in situ, has been noticed.

Progressive Fracture of Fiber Composite Thin Shell Structures Under Internal Pressure and Axial Loads

NASA Technical Reports Server (NTRS)

Gotsis, Pascal K.; Chamis, Christos C.; Minnetyan, Levon

1996-01-01

Graphite/epoxy composite thin shell structures were simulated to investigate damage and fracture progression due to internal pressure and axial loading. Defective and defect-free structures (thin cylinders) were examined. The three different laminates examined had fiber orientations of (90/0/+/-0)(sub s), where 0 is 45, 60, and 75 deg. CODSTRAN, an integrated computer code that scales up constituent level properties to the structural level and accounts for all possible failure modes, was used to simulate composite degradation under loading. Damage initiation, growth, accumulation, and propagation to fracture were included in the simulation. Burst pressures for defective and defect-free shells were compared to evaluate damage tolerance. The results showed that damage initiation began with matrix failure whereas damage and/or fracture progression occurred as a result of additional matrix failure and fiber fracture. In both thin cylinder cases examined (defective and defect-free), the optimum layup configuration was (90/0/+/-60)(sub s) because it had the best damage tolerance with respect to the burst pressure.

Reduction of severe mitral regurgitation with the MitraClip system improves renal function in two patients presenting with acute kidney injury and progressive renal failure due to cardio renal syndrome.

PubMed

Asdonk, T; Nickenig, G; Hammerstingl, C

2014-10-01

Mitral regurgitation (MR) is a frequent valve disorder in elderly patients, often accompanied by multiple comorbidities such as renal impairment. In these patients percutaneous mitral valve (MV) repair has become an established treatment option but the role of MR on renal dysfunction is not yet well defined. We here report on two cases presenting with severe MR and progressive renal failure caused by cardio renal syndrome, in which percutaneous MV treatment with the MitraClip system significantly improved renal function. These findings suggest that interventional MV repair can prevent progression of renal deterioration in patients suffering from combined advanced heart and renal failure. Further clinical studies are necessary to support our finding and to answer the question whether optimizing renal function by implantation of the MitraClip device is also of prognostic relevance in these patients. © 2014 Wiley Periodicals, Inc.

Management of Mediastinal Relapse after Treatment with Stereotactic Body Radiotherapy or Accelerated Hypofractionated Radiotherapy for Stage I/II Non–Small-Cell Lung Cancer

PubMed Central

Kilburn, Jeremy M.; Lester, Scott C.; Lucas, John T.; Soike, Michael H.; Blackstock, A. William; Kearns, William T.; Hinson, William H.; Miller, Antonius A.; Petty, William J.; Munley, Michael T.; Urbanic, James J.

2014-01-01

Purpose/Objective(s) Regional failures occur in up to 15% of patients treated with stereotactic body radiotherapy (SBRT) for stage I/II lung cancer. This report focuses on the management of the unique scenario of isolated regional failures. Methods Patients treated initially with SBRT or accelerated hypo-fractionated radiotherapy were screened for curative intent treatment of isolated mediastinal failures (IMFs). Local control, regional control, progression-free survival, and distant control were estimated from the date of salvage treatment using the Kaplan–Meier method. Results Among 160 patients treated from 2002 to 2012, 12 suffered IMF and were amenable to salvage treatment. The median interval between treatments was 16 months (2–57 mo). Median salvage dose was 66 Gy (60–70 Gy). With a median follow-up of 10 months, the median overall survival was 15 months (95% confidence interval, 5.8–37 mo). When estimated from original treatment, the median overall survival was 38 months (95% confidence interval, 17–71 mo). No subsequent regional failures occurred. Distant failure was the predominant mode of relapse following salvage for IMF with a 2-year distant control rate of 38%. At the time of this analysis, three patients have died without recurrence while four are alive and no evidence of disease. High-grade toxicity was uncommon. Conclusions To our knowledge, this is first analysis of salvage mediastinal radiation after SBRT or accelerated hypofractionated radiotherapy in lung cancer. Outcomes appear similar to stage III disease at presentation. Distant failures were common, suggesting a role for concurrent or sequential chemotherapy. A standard full course of external beam radiotherapy is advisable in this unique clinical scenario. PMID:24736084

Impact of different variables on the outcome of patients with clinically confined prostate carcinoma: prediction of pathologic stage and biochemical failure using an artificial neural network.

PubMed

Ziada, A M; Lisle, T C; Snow, P B; Levine, R F; Miller, G; Crawford, E D

2001-04-15

The advent of advanced computing techniques has provided the opportunity to analyze clinical data using artificial intelligence techniques. This study was designed to determine whether a neural network could be developed using preoperative prognostic indicators to predict the pathologic stage and time of biochemical failure for patients who undergo radical prostatectomy. The preoperative information included TNM stage, prostate size, prostate specific antigen (PSA) level, biopsy results (Gleason score and percentage of positive biopsy), as well as patient age. All 309 patients underwent radical prostatectomy at the University of Colorado Health Sciences Center. The data from all patients were used to train a multilayer perceptron artificial neural network. The failure rate was defined as a rise in the PSA level > 0.2 ng/mL. The biochemical failure rate in the data base used was 14.2%. Univariate and multivariate analyses were performed to validate the results. The neural network statistics for the validation set showed a sensitivity and specificity of 79% and 81%, respectively, for the prediction of pathologic stage with an overall accuracy of 80% compared with an overall accuracy of 67% using the multivariate regression analysis. The sensitivity and specificity for the prediction of failure were 67% and 85%, respectively, demonstrating a high confidence in predicting failure. The overall accuracy rates for the artificial neural network and the multivariate analysis were similar. Neural networks can offer a convenient vehicle for clinicians to assess the preoperative risk of disease progression for patients who are about to undergo radical prostatectomy. Continued investigation of this approach with larger data sets seems warranted. Copyright 2001 American Cancer Society.

Plasma volume status predicts prognosis in patients with acute heart failure syndromes.

PubMed

Yoshihisa, Akiomi; Abe, Satoshi; Sato, Yu; Watanabe, Shunsuke; Yokokawa, Tetsuro; Miura, Shunsuke; Misaka, Tomofumi; Sato, Takamasa; Suzuki, Satoshi; Oikawa, Masayoshi; Kobayashi, Atsushi; Yamaki, Takayoshi; Kunii, Hiroyuki; Saitoh, Shu-Ichi; Takeishi, Yasuchika

2017-01-01

The intravascular compartment is known as the plasma volume, and the extravascular compartment represents fluid within the interstitial space. Plasma volume expansion is a major symptom of heart failure. The aim of the current study was to investigate the impact of plasma volume status on the prognosis of acute heart failure syndromes. We analyzed 1115 patients with acute heart failure syndromes who were admitted to our hospital. These patients were divided into three groups based on their plasma volume status at admission: first tertile (plasma volume status <41.9%, n = 371), second tertile (41.9%⩽ plasma volume status <49.0%, n = 372), and third tertile (49.0%⩽ plasma volume status, n = 372). Plasma volume status was defined as follows: actual plasma volume = (1 - hematocrit) × [ a + ( b × body weight)] ( a=1530 in males and a=864 in females, b=41.0 in males and b=47.9 in females); ideal plasma volume = c × body weight ( c=39 in males and c=40 in females); and plasma volume status = [(actual plasma volume - ideal plasma volume)/ideal plasma volume] × 100 (%). In the Kaplan-Meier analysis, all-cause mortality, cardiac mortality and cardiac events increased progressively from the first to third tertile ( p <0.001, respectively). In the Cox proportional hazard analysis, after adjusting for potential confounding factors, plasma volume status was an independent predictor of all-cause mortality (hazard ratio 1.429, p < 0.001), cardiac mortality (hazard ratio 1.416, p = 0.001) and cardiac events (hazard ratio 1.207, p = 0.004). Increased congestion is associated with increased morbidity and mortality in heart failure patients. Plasma volume status, which represents intravascular compartment and congestion, can identify poor prognosis in patients with acute heart failure syndromes.

Flexural Progressive Failure of Carbon/Glass Interlayer and Intralayer Hybrid Composites

PubMed Central

Wu, Weili; Gong, Zhili

2018-01-01

The flexural progressive failure modes of carbon fiber and glass fiber (C/G) interlayer and intralayer hybrid composites were investigated in this work. Results showed that the bending failure modes for interlayer hybrid composites are determined by the layup structure. Besides, the bending failure is characterized by the compression failure of the upper layer, when carbon fiber tends to distribute in the upper layer, the interlayer hybrid composite fails early, the failure force is characterized by a multi-stage slightly fluctuating decline and the fracture area exhibits a diamond shape. While carbon fiber distributes in the middle or bottom layer, the failure time starts late, and the failure process exhibits one stage sharp force/stress drop, the fracture zone of glass fiber above the carbon layers presents an inverted trapezoid shape, while the fracture of glass fiber below the carbon layers exhibits an inverted triangular shape. With regards to the intralayer hybrid composites, the C/G hybrid ratio plays a dominating role in the bending failure which could be considered as the mixed failures of four structures. The bending failure of intralayer hybrid composites occurs in advance since carbon fiber are located in each layer; the failure process shows a multi-stage fluctuating decline, and the decline slows down as carbon fiber content increases, and the fracture sound release has the characteristics of a low intensity and high frequency for a long time. By contrast, as glass fiber content increases, the bending failure of intralayer composites is featured with a multi-stage cliff decline with a high amplitude and low frequency for a short-time fracture sound release. PMID:29673236

Apatinib for advanced nonsmall-cell lung cancer: A retrospective case series analysis.

PubMed

Yang, Chengxi; Feng, Wen; Wu, Di

2018-01-01

Apatinib, a tyrosine kinase inhibitor which selectively inhibits vascular endothelial growth factor receptor-2, has been shown to be beneficial to patients with a variety of cancers, including advanced nonsmall-cell lung cancer (NSCLC). Thus, this study was aimed to retrospectively assess the efficacy and safety of apatinib in patients with advanced/metastatic NSCLC who failed more than two lines of treatment. Twenty-three NSCLC patients were involved in this study, who received oral apatinib at a daily dose of 250/500/750 mg, with the progression after the failure of second-line therapy. Treatment was continued until disease progression. The tumor assessments were determined according to the Response Evaluation Criteria in Solid Tumors (version 1.1). Safety was evaluated with adverse reactions and toxicities based on the Common Terminology Criteria for Adverse Events (version 4.0). Response and safety for the included patients were evaluated every 8 weeks. In this study, 23 NSCLC patients were followed from January 2015 to December 2016. Available image efficacy was obtained in 22 patients, including 4 identified as partial responses, 17 stable disease, and 1 progressive disease; no complete responses was observed. The objective response rate was 18.2%, and the disease control rate was 95.5%. Median progression free survival and overall survival for apatinib were 203 days (95% CI, 120-269) and 227 days (95% CI, 146-294), respectively. The most frequent treatment-related adverse events were hypertension, gastrointestinal reactions, and hand-foot skin reaction. Apatinib exhibited modest activity and acceptable toxicity for advanced NSCLC after the failure of chemotherapy or other targeted therapy.

Long-Term Outcomes of Vestibular Schwannomas Treated With Fractionated Stereotactic Radiotherapy: An Institutional Experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kapoor, Sumit; Batra, Sachin; Carson, Kathryn

2011-11-01

Purpose: We assessed clinical outcome and long-term tumor control after fractionated stereotactic radiotherapy (FSRT) for unilateral schwannoma. Methods and Materials: Between 1995 and 2007, 496 patients were treated with fractionated stereotactic radiotherapy at Johns Hopkins Hospital (Baltimore, MD); 385 patients had radiologic follow-up that met the inclusion criteria. The primary endpoint was treatment failure. Secondary endpoints were radiologic progression and clinical outcome. Logistic regression analysis assessed the association of age, race, tumor side, sex, and pretreatment symptoms. Results: In 11 patients (3%) treatment failed, and they required salvage (microsurgical) treatment. Radiologic progression was observed in 116 patients (30.0%), including 35more » patients (9%) in whom the treatment volume more than doubled during the follow-up period, although none required surgical resection. Tumors with baseline volumes of less than 1 cm{sup 3} were 18.02 times more likely to progress than those with tumor volumes of 1 cm{sup 3} or greater (odds ratio, 18.02; 95% confidence interval, 4.25-76.32). Treatment-induced neurologic morbidity included 8 patients (1.6%) with new facial weakness, 12 patients (2.8%) with new trigeminal paresthesias, 4 patients (0.9%) with hydrocephalus (1 communicating and 3 obstructive), and 2 patients (0.5%) with possibly radiation-induced neoplasia. Conclusions: Although the rate of treatment failure is low (3%), careful follow-up shows that radiologic progression occurs frequently. When reporting outcome, the 'no salvage surgery needed' and 'no additional treatment needed' criteria for treatment success need to be complemented by the radiologic data.« less

Research subjects for analytical estimation of core degradation at Fukushima-Daiichi nuclear power plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nagase, F.; Ishikawa, J.; Kurata, M.

2013-07-01

Estimation of the accident progress and status inside the pressure vessels (RPV) and primary containment vessels (PCV) is required for appropriate conductance of decommissioning in the Fukushima-Daiichi NPP. For that, it is necessary to obtain additional experimental data and revised models for the estimation using computer codes with increased accuracies. The Japan Atomic Energy Agency (JAEA) has selected phenomena to be reviewed and developed, considering previously obtained information, conditions specific to the Fukushima-Daiichi NPP accident, and recent progress of experimental and analytical technologies. As a result, research and development items have been picked up in terms of thermal-hydraulic behavior inmore » the RPV and PCV, progression of fuel bundle degradation, failure of the lower head of RPV, and analysis of the accident. This paper introduces the selected phenomena to be reviewed and developed, research plans and recent results from the JAEA's corresponding research programs. (authors)« less

Abnormal laughter-like vocalisations replacing speech in primary progressive aphasia

PubMed Central

Rohrer, Jonathan D.; Warren, Jason D.; Rossor, Martin N.

2009-01-01

We describe ten patients with a clinical diagnosis of primary progressive aphasia (PPA) (pathologically confirmed in three cases) who developed abnormal laughter-like vocalisations in the context of progressive speech output impairment leading to mutism. Failure of speech output was accompanied by increasing frequency of the abnormal vocalisations until ultimately they constituted the patient's only extended utterance. The laughter-like vocalisations did not show contextual sensitivity but occurred as an automatic vocal output that replaced speech. Acoustic analysis of the vocalisations in two patients revealed abnormal motor features including variable note duration and inter-note interval, loss of temporal symmetry of laugh notes and loss of the normal decrescendo. Abnormal laughter-like vocalisations may be a hallmark of a subgroup in the PPA spectrum with impaired control and production of nonverbal vocal behaviour due to disruption of fronto-temporal networks mediating vocalisation. PMID:19435636

Abnormal laughter-like vocalisations replacing speech in primary progressive aphasia.

PubMed

Rohrer, Jonathan D; Warren, Jason D; Rossor, Martin N

2009-09-15

We describe ten patients with a clinical diagnosis of primary progressive aphasia (PPA) (pathologically confirmed in three cases) who developed abnormal laughter-like vocalisations in the context of progressive speech output impairment leading to mutism. Failure of speech output was accompanied by increasing frequency of the abnormal vocalisations until ultimately they constituted the patient's only extended utterance. The laughter-like vocalisations did not show contextual sensitivity but occurred as an automatic vocal output that replaced speech. Acoustic analysis of the vocalisations in two patients revealed abnormal motor features including variable note duration and inter-note interval, loss of temporal symmetry of laugh notes and loss of the normal decrescendo. Abnormal laughter-like vocalisations may be a hallmark of a subgroup in the PPA spectrum with impaired control and production of nonverbal vocal behaviour due to disruption of fronto-temporal networks mediating vocalisation.

Intelligent failure-tolerant control

NASA Technical Reports Server (NTRS)

Stengel, Robert F.

1991-01-01

An overview of failure-tolerant control is presented, beginning with robust control, progressing through parallel and analytical redundancy, and ending with rule-based systems and artificial neural networks. By design or implementation, failure-tolerant control systems are 'intelligent' systems. All failure-tolerant systems require some degrees of robustness to protect against catastrophic failure; failure tolerance often can be improved by adaptivity in decision-making and control, as well as by redundancy in measurement and actuation. Reliability, maintainability, and survivability can be enhanced by failure tolerance, although each objective poses different goals for control system design. Artificial intelligence concepts are helpful for integrating and codifying failure-tolerant control systems, not as alternatives but as adjuncts to conventional design methods.

Stereotactic Body Radiation Therapy for Oligometastatic Prostate Cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muldermans, Jonathan L.; Romak, Lindsay B.; Kwon, Eugene D.

Purpose: To review outcomes of patients with oligometastatic prostate cancer (PCa) treated with stereotactic body radiation therapy (SBRT) and to identify variables associated with local failure. Methods and Materials: We retrospectively reviewed records of patients treated with SBRT for oligometastatic PCa. Metastasis control (ie, control of the treated lesion, MC), biochemical progression-free survival, distant progression-free survival, and overall survival were estimated with the Kaplan-Meier method. Results: Sixty-six men with 81 metastatic PCa lesions, 50 of which were castrate-resistant, were included in the analysis. Lesions were in bone (n=74), lymph nodes (n=6), or liver (n=1). Stereotactic body radiation therapy was deliveredmore » in 1 fraction to 71 lesions (88%), at a median dose of 16 Gy (range, 16-24 Gy). The remaining lesions received 30 Gy in 3 fractions (n=6) or 50 Gy in 5 fractions (n=4). Median follow-up was 16 months (range, 3-49 months). Estimated MC at 2 years was 82%. Biochemical progression-free survival, distant progression-free survival, and overall survival were 54%, 45%, and 83%, respectively. On multivariate analysis, only the dose of SBRT was significantly associated with MC; lesions treated with 16 Gy had 58% MC, and those treated with ≥18 Gy had 95% MC at 2 years (P≤.001). At 2 years, MC for lesions treated with 18 Gy (n=21) was 88%. No patient treated with ≥18 Gy in a single fraction or with any multifraction regimen had local failure. Six patients (9%) had grade 1 pain flare, and 2 (3%) had grade 2 pain flare. No grade 2 or greater late toxicities were reported. Conclusions: Stereotactic body radiation therapy for patients with oligometastatic prostate cancer provided optimal metastasis control and acceptable toxicity with doses ≥18 Gy. Biochemical progression-free survival was 54% at 16 months with the inclusion of SBRT in the treatment regimen. Stereotactic body radiation therapy should be considered in patients with castration-refractory, oligometastatic prostate cancer who have limited options for systemic therapy.« less

Modeling Freedom From Progression for Standard-Risk Medulloblastoma: A Mathematical Tumor Control Model With Multiple Modes of Failure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brodin, N. Patrik, E-mail: nils.patrik.brodin@rh.dk; Niels Bohr Institute, University of Copenhagen, Copenhagen; Vogelius, Ivan R.

2013-10-01

Purpose: As pediatric medulloblastoma (MB) is a relatively rare disease, it is important to extract the maximum information from trials and cohort studies. Here, a framework was developed for modeling tumor control with multiple modes of failure and time-to-progression for standard-risk MB, using published pattern of failure data. Methods and Materials: Outcome data for standard-risk MB published after 1990 with pattern of relapse information were used to fit a tumor control dose-response model addressing failures in both the high-dose boost volume and the elective craniospinal volume. Estimates of 5-year event-free survival from 2 large randomized MB trials were used tomore » model the time-to-progression distribution. Uncertainty in freedom from progression (FFP) was estimated by Monte Carlo sampling over the statistical uncertainty in input data. Results: The estimated 5-year FFP (95% confidence intervals [CI]) for craniospinal doses of 15, 18, 24, and 36 Gy while maintaining 54 Gy to the posterior fossa was 77% (95% CI, 70%-81%), 78% (95% CI, 73%-81%), 79% (95% CI, 76%-82%), and 80% (95% CI, 77%-84%) respectively. The uncertainty in FFP was considerably larger for craniospinal doses below 18 Gy, reflecting the lack of data in the lower dose range. Conclusions: Estimates of tumor control and time-to-progression for standard-risk MB provides a data-driven setting for hypothesis generation or power calculations for prospective trials, taking the uncertainties into account. The presented methods can also be applied to incorporate further risk-stratification for example based on molecular biomarkers, when the necessary data become available.« less

Pyruvate dehydrogenase complex and lactate dehydrogenase are targets for therapy of acute liver failure.

PubMed

Ferriero, Rosa; Nusco, Edoardo; De Cegli, Rossella; Carissimo, Annamaria; Manco, Giuseppe; Brunetti-Pierri, Nicola

2018-03-24

Acute liver failure is a rapidly progressive deterioration of hepatic function resulting in high mortality and morbidity. Metabolic enzymes can translocate to the nucleus to regulate histone acetylation and gene expression. Levels and activities of pyruvate dehydrogenase complex (PDHC) and lactate dehydrogenase (LDH) were evaluated in nuclear fractions of livers of mice exposed to various hepatotoxins including CD95-antibody, α-amanitin, and acetaminophen. Whole-genome gene expression profiling by RNA-seq was performed in livers of mice with acute liver failure and analyzed by gene ontology enrichment analysis. Cell viability was evaluated in cell lines knocked-down for PDHA1 or LDH-A and in cells incubated with the LDH inhibitor galloflavin after treatment with CD95-antibody. We evaluated whether the histone acetyltransferase inhibitor garcinol or galloflavin could reduce liver damage in mice with acute liver failure. Levels and activities of PDHC and LDH were increased in nuclear fractions of livers of mice with acute liver failure. The increase of nuclear PDHC and LDH was associated with increased concentrations of acetyl-CoA and lactate in nuclear fractions, and histone H3 hyper-acetylation. Gene expression in livers of mice with acute liver failure suggested that increased histone H3 acetylation induces the expression of genes related to damage response. Reduced histone acetylation by the histone acetyltransferase inhibitor garcinol decreased liver damage and improved survival in mice with acute liver failure. Knock-down of PDHC or LDH improved viability in cells exposed to a pro-apoptotic stimulus. Treatment with the LDH inhibitor galloflavin that was also found to inhibit PDHC, reduced hepatic necrosis, apoptosis, and expression of pro-inflammatory cytokines in mice with acute liver failure. Mice treated with galloflavin also showed a dose-response increase in survival. PDHC and LDH translocate to the nucleus, leading to increased nuclear concentrations of acetyl-CoA and lactate. This results in histone H3 hyper-acetylation and expression of damage response genes. Inhibition of PDHC and LDH reduces liver damage and improves survival in mice with acute liver failure. Thus, PDHC and LDH are targets for therapy of acute liver failure. Acute liver failure is a rapidly progressive deterioration of liver function resulting in high mortality. In experimental mouse models of acute liver failure, we found that two metabolic enzymes, namely pyruvate dehydrogenase complex and lactic dehydrogenase, translocate to the nucleus resulting in detrimental gene expression. Treatment with an inhibitor of these two enzymes was found to reduce liver damage and to improve survival. Copyright © 2018 European Association for the Study of the Liver. Published by Elsevier B.V. All rights reserved.

Exercise Induced Rhabdomyolysis with Compartment Syndrome and Renal Failure

PubMed Central

Bhalla, Mary Colleen; Dick-Perez, Ryan

2014-01-01

Exertional rhabdomyolysis is sequela that is occasionally seen after strenuous exercise. The progression to compartment syndrome or renal failure is a rare complication that requires prompt recognition and treatment to prevent morbidity (Giannoglou et al. 2007). We present a case of a 22-year-old college football player who presented to the emergency department (ED) after a typical leg workout as part of his weight conditioning. He was found to have rhabdomyolysis with evidence of renal insufficiency. His condition progressed to bilateral compartment syndrome and renal failure requiring dialysis. After bilateral fasciotomies were performed he had resolution of his compartment syndrome. He continued to be dialysis dependent and had no return of his renal function at discharge 12 days after admission. PMID:25105034

Exercise induced rhabdomyolysis with compartment syndrome and renal failure.

PubMed

Bhalla, Mary Colleen; Dick-Perez, Ryan

2014-01-01

Exertional rhabdomyolysis is sequela that is occasionally seen after strenuous exercise. The progression to compartment syndrome or renal failure is a rare complication that requires prompt recognition and treatment to prevent morbidity (Giannoglou et al. 2007). We present a case of a 22-year-old college football player who presented to the emergency department (ED) after a typical leg workout as part of his weight conditioning. He was found to have rhabdomyolysis with evidence of renal insufficiency. His condition progressed to bilateral compartment syndrome and renal failure requiring dialysis. After bilateral fasciotomies were performed he had resolution of his compartment syndrome. He continued to be dialysis dependent and had no return of his renal function at discharge 12 days after admission.

Weight as predictors of clinical progression and treatment failure: results from the TREAT Asia Pediatric HIV Observational Database.

PubMed

Kariminia, Azar; Durier, Nicolas; Jourdain, Gonzague; Saghayam, Suneeta; Do, Chau V; Nguyen, Lam Van; Hansudewechakul, Rawiwan; Lumbiganon, Pagakrong; Chokephaibulkit, Kulkanya; Truong, Khanh Huu; Sirisanthana, Virat; Ung, Vibol; Vonthanak, Saphonn; Ananworanich, Jintanat; Nik Yusoff, Nik Khairulddin; Kurniati, Nia; Azahar Razali, Kamarul; Fong, Moy Siew; Nallusamy, Revathy; Wati, Dewi Kumara

2014-09-01

To evaluate the value of time-updated weight and height in predicting clinical progression, and immunological and virological failure in children receiving combination antiretroviral therapy (cART). We used Cox regression to analyze data of a cohort of Asian children. A total of 2608 children were included; median age at cART was 5.7 years. Time-updated weight for age z score < -3 was associated with mortality (P < 0.001) independent of CD4% and < -2 was associated with immunological failure (P ≤ 0.03) independent of age at cART. Weight monitoring provides useful data to inform clinical management of children on cART in resource-limited settings.

Downstream anastomotic hyperplasia. A mechanism of failure in Dacron arterial grafts.

PubMed Central

LoGerfo, F W; Quist, W C; Nowak, M D; Crawshaw, H M; Haudenschild, C C

1983-01-01

The precise location and progression of anastomotic hyperplasia and its possible relationship to flow disturbances was investigated in femoro-femoral Dacron grafts in 28 dogs. In 13 grafts, the outflow from the end-to-side downstream anastomosis was bidirectional (BDO), and in 15 it was unidirectional (UDO) (distally). Grafts were electively removed at intervals of two to 196 days or at the time of thrombosis. Each anastomosis and adjacent artery was perfusion-fixed and sectioned sagittally. The mean sagittal section was projected onto a digitized pad, and the total area of hyperplasia internal to the arterial internal elastic lamina and within the adjacent graft was integrated by computer. The location of the hyperplasia was compared with previously established sites of flow separation and stagnation. The observation was made that hyperplasia is significantly greater at the downstream, as compared with the upstream, anastomosis in both groups (BDO = p less than 0.001 and UDO = p less than 0.001) (analysis of variance for independent groups). Furthermore, this downstream hyperplasia was progressive with time (BDO p less than 0.01) (UDO p less than 0.01); Spearman Rank Correlation. There was no significant increase in the extent of downstream hyperplasia where flow separation was known to be greater (BDO). Five grafts failed (three BDO, two UDO), as a result of complete occlusion of the downstream anastomosis by fibrous hyperplasia. Transmission electron microscopy showed the hyperplasia to consist of collagen-producing smooth muscle cells. Anastomotic hyperplasia is significantly greater at the downstream anastomosis, is progressive with time, and is the primary cause of failure of Dacron arterial grafts in this model. Quantitative analysis of downstream anastomotic hyperplasia may be a valuable measure of the biocompatibility of Dacron grafts. Images Fig. 2. Fig. 3. Fig. 5. Fig. 6. Fig. 7. Fig. 8. PMID:6219641

Influence of angiotensin converting enzyme (ACE) gene rs4362 polymorphism on the progression of kidney failure in patients with autosomal dominant polycystic kidney disease (ADPKD).

PubMed

Ramanathan, Gnanasambandan; Ghosh, Santu; Elumalai, Ramprasad; Periyasamy, Soundararajan; Lakkakula, Bhaskar V K S

2016-06-01

Autosomal dominant polycystic kidney disease (ADPKD) is an inherited systemic disorder, characterized by the fluid filled cysts in the kidneys leading to end stage renal failure in later years of life. Hypertension is one of the major factors independently contributing to the chronic kidney disease (CKD) progression. The renin-angiotensin aldosterone system (RAAS) genes have been extensively studied as hypertension candidate genes. The aim of the present study was to investigate the role of angiotensin converting enzyme tagging - single nucleotide polymorphisms (ACE tag-SNPs) in progression of CKD in patients with ADPKD. m0 ethods: In the present study six ACE tagSNPs (angiotensin converting enzyme tag single nucleotide polymorphisms) and insertion/deletion (I/D) in 102 ADPKD patients and 106 control subjects were investigated. The tagSNPs were genotyped using FRET-based KASPar method and ACE ID by polymerase chain reaction (PCR) and electrophoresis. Genotypes and haplotypes were compared between ADPKD patients and controls. Univariate and multivariate logistic regression analyses were performed to assess the effect of genotypes and hypertension on CKD advancement. Mantel-Haenszel (M-H) stratified analysis was performed to study the relationship between different CKD stages and hypertension and their interaction. All loci were polymorphic and except rs4293 SNP the remaining loci followed Hardy-Weinberg equilibrium. Distribution of ACE genotypes and haplotypes in controls and ADPKD patients was not significant. A significant linkage disequilibrium (LD) was observed between SNPs forming two LD blocks. The univariate analysis revealed that the age, hypertension, family history of diabetes and ACE rs4362 contributed to the advancement of CKD. The results suggest that the ACE genotypes are effect modifiers of the relationship between hypertension and CKD advancement among the ADPKD patients.

Time series analysis of tool wear in sheet metal stamping using acoustic emission

NASA Astrophysics Data System (ADS)

Vignesh Shanbhag, V.; Pereira, P. Michael; Rolfe, F. Bernard; Arunachalam, N.

2017-09-01

Galling is an adhesive wear mode that often affects the lifespan of stamping tools. Since stamping tools represent significant economic cost, even a slight improvement in maintenance cost is of high importance for the stamping industry. In other manufacturing industries, online tool condition monitoring has been used to prevent tool wear-related failure. However, monitoring the acoustic emission signal from a stamping process is a non-trivial task since the acoustic emission signal is non-stationary and non-transient. There have been numerous studies examining acoustic emissions in sheet metal stamping. However, very few have focused in detail on how the signals change as wear on the tool surface progresses prior to failure. In this study, time domain analysis was applied to the acoustic emission signals to extract features related to tool wear. To understand the wear progression, accelerated stamping tests were performed using a semi-industrial stamping setup which can perform clamping, piercing, stamping in a single cycle. The time domain features related to stamping were computed for the acoustic emissions signal of each part. The sidewalls of the stamped parts were scanned using an optical profilometer to obtain profiles of the worn part, and they were qualitatively correlated to that of the acoustic emissions signal. Based on the wear behaviour, the wear data can be divided into three stages: - In the first stage, no wear is observed, in the second stage, adhesive wear is likely to occur, and in the third stage severe abrasive plus adhesive wear is likely to occur. Scanning electron microscopy showed the formation of lumps on the stamping tool, which represents galling behavior. Correlation between the time domain features of the acoustic emissions signal and the wear progression identified in this study lays the basis for tool diagnostics in stamping industry.

Effects of adding Rheum officinale to angiotensin-converting enzyme inhibitors or angiotensin receptor blockers on renal function in patients with chronic renal failure: A meta-analysis of randomized controlled trials
.

PubMed

Yang, Yue; Ma, Ye-Ping; Zhang, Zheng; Dai, Pei-Lin; Li, Ping; Li, Wen-Ge

2018-06-01

Rheum officinale is a traditional medicinal herb used widely in China to treat chronic renal failure, but the proof of evidence-based medicine is poor. This meta-analysis aims to assess the benefits of angiotensin-converting enzyme inhibitors (ACEIs) or angiotensin receptor blockers (ARBs) supplemented with Rheum officinale for delaying the progression of chronic renal failure. The MEDLINE, EMBASE, Cochrane Library, SinoMed, Chinese National Knowledge Infrastructure, Wanfang, and VIP databases were searched to identify studies published before September 2016 that investigated the effects of ACEI/ARB plus the Chinese patented medicine Rheum (CPM-Rheum) compared to ACEI/ARB alone in lowering serum creatinine (SCr) and blood urea nitrogen (BUN) levels in chronic renal failure patients. Review Manager 5.3 was used to perform the meta-analysis. Fixed- and random-effects models were used to analyze the data. The meta-analysis included nine clinical trials. Comparisons of patients before and after treatment with ACEI/ARB plus CPM-Rheum or ACEI/ARB alone revealed that ACEI/ARB plus CPM-Rheum resulted in significantly greater reductions in SCr (short-term: weighted mean difference (WMD): 17.26, 95% confidence interval (CI): 7.28 - 27.24; long-term: WMD: 63.71, 95% CI: 51.01 - 76.41) and BUN (short-term: WMD: 1.70, 95% CI: 1.27 - 2.12; long-term: WMD: 3.98, 95% CI: 3.14 - 4.82) than ACEI/ARB alone. In patients with chronic renal failure, the addition of CPM-Rheum to ACEI/ARB significantly lowered both SCr and BUN, particularly after long-term administration. Thus, the combination of ACEI/ARB and CPM-Rheum may improve the treatment of patients with impaired renal function.
.

Potential surrogate endpoints for prostate cancer survival: analysis of a phase III randomized trial.

PubMed

Ray, Michael E; Bae, Kyounghwa; Hussain, Maha H A; Hanks, Gerald E; Shipley, William U; Sandler, Howard M

2009-02-18

The identification of surrogate endpoints for prostate cancer-specific survival may shorten the length of clinical trials for prostate cancer. We evaluated distant metastasis and general clinical treatment failure as potential surrogates for prostate cancer-specific survival by use of data from the Radiation Therapy and Oncology Group 92-02 randomized trial. Patients (n = 1554 randomly assigned and 1521 evaluable for this analysis) with locally advanced prostate cancer had been treated with 4 months of neoadjuvant and concurrent androgen deprivation therapy with external beam radiation therapy and then randomly assigned to no additional therapy (control arm) or 24 additional months of androgen deprivation therapy (experimental arm). Data from landmark analyses at 3 and 5 years for general clinical treatment failure (defined as documented local disease progression, regional or distant metastasis, initiation of androgen deprivation therapy, or a prostate-specific antigen level of 25 ng/mL or higher after radiation therapy) and/or distant metastasis were tested as surrogate endpoints for prostate cancer-specific survival at 10 years by use of Prentice's four criteria. All statistical tests were two-sided. At 3 years, 1364 patients were alive and contributed data for analysis. Both distant metastasis and general clinical treatment failure at 3 years were consistent with all four of Prentice's criteria for being surrogate endpoints for prostate cancer-specific survival at 10 years. At 5 years, 1178 patients were alive and contributed data for analysis. Although prostate cancer-specific survival was not statistically significantly different between treatment arms at 5 years (P = .08), both endpoints were consistent with Prentice's remaining criteria. Distant metastasis and general clinical treatment failure at 3 years may be candidate surrogate endpoints for prostate cancer-specific survival at 10 years. These endpoints, however, must be validated in other datasets.

Risk factors for heart failure in patients with type 2 diabetes mellitus and stage 4 chronic kidney disease treated with bardoxolone methyl.

PubMed

Chin, Melanie P; Wrolstad, Danielle; Bakris, George L; Chertow, Glenn M; de Zeeuw, Dick; Goldsberry, Angie; Linde, Peter G; McCullough, Peter A; McMurray, John J; Wittes, Janet; Meyer, Colin J

2014-12-01

A phase 3 randomized clinical trial was designed to test whether bardoxolone methyl, a nuclear factor erythroid-2-related factor 2 (Nrf2) activator, slows progression to end-stage renal disease in patients with stage 4 chronic kidney disease and type 2 diabetes mellitus. The trial was terminated because of an increase in heart failure in the bardoxolone methyl group; many of the events were clinically associated with fluid retention. We randomized 2,185 patients with type 2 diabetes mellitus (T2DM) and stage 4 chronic kidney disease (CKD) (estimated glomerular filtration rate 15 to <30 mL min(-1) 1.73 m(-2)) to once-daily bardoxolone methyl (20 mg) or placebo. We used classification and regression tree analysis to identify baseline factors predictive of heart failure or fluid overload events. Elevated baseline B-type natriuretic peptide and previous hospitalization for heart failure were identified as predictors of heart failure events; bardoxolone methyl increased the risk of heart failure by 60% in patients with these risk factors. For patients without these baseline characteristics, the risk for heart failure events among bardoxolone methyl- and placebo-treated patients was similar (2%). The same risk factors were also identified as predictors of fluid overload and appeared to be related to other serious adverse events. Bardoxolone methyl contributed to events related to heart failure and/or fluid overload in a subpopulation of susceptible patients with an increased risk for heart failure at baseline. Careful selection of participants and vigilant monitoring of the study drug will be required in any future trials of bardoxolone methyl to mitigate the risk of heart failure and other serious adverse events. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Shunting for hydrocephalus: analysis of techniques and failure patterns.

PubMed

Nigim, Fares; Critchlow, Jonathan F; Schneider, Benjamin E; Chen, Clark; Kasper, Ekkehard M

2014-09-01

Hydrocephalus is characterized by ventricular dilatation because of progressive accumulation of cerebrospinal fluid. Normal pressure hydrocephalus (NPH) affects a subset of patients representing a reversible clinical triad of gait disturbance, urinary incontinence, and dementia with normal cerebrospinal fluid pressure and composition. Various shunting procedures have been used for treatment, but techniques and outcomes remain under debate. The objective of this study was to evaluate the clinical outcomes of 232 patients with and without NPH after the first-time Ventriculoperitoneal shunt placement and assessed patterns of failure between December 2004 and December 2012. Mean age was 54.7 y in non-NPH and 71.9 y in NPH patients. We used open technique in 34.3% and laparoscopic technique in 65.7% of NPH patients and 32.7% and 67.3% of the non-NPH patients, respectively. A total of 36 of 232 patients displayed shunt failure, 16.4% in NPH and 15.2% in non-NPH patients. Twenty-three of 155 patients failed after laparoscopic and 13 of 77 failed after open placement. Proximal shunt failure was more frequent in the non-NPH cohort. Distal failures accounted for 13 of 232 cases, and the difference between laparoscopic (six of 155) and open failures (seven of 77) was profound, but not between NPH- and non-NPH patients. Shunt failures are related to the placement method. Non-NPH patients showed more proximal failures. NPH patients showed fewer proximal failures. Less distal failures were observed after laparoscopic ventriculoperitoneal shunt placement without significant differences between NPH and non-NPH patients. Beyond this, laparoscopic surgery carries distinct advantages such as shorter operating room times and hospital stays, which should translate into less use of pain medications, earlier mobilization, and a lower incidence of ileus. Copyright © 2014 Elsevier Inc. All rights reserved.

Molecular Mechanisms of Right Ventricular Failure

PubMed Central

Reddy, Sushma; Bernstein, Daniel

2015-01-01

An abundance of data has provided insight into the mechanisms underlying the development of left ventricular (LV) hypertrophy and its progression to LV failure. In contrast, there is minimal data on the adaptation of the right ventricle (RV) to pressure and volume overload and the transition to RV failure. This is a critical clinical question, as the RV is uniquely at risk in many patients with repaired or palliated congenital heart disease and in those with pulmonary hypertension. Standard heart failure therapies have failed to improve function or survival in these patients, suggesting a divergence in the molecular mechanisms of RV vs. LV failure. Although, on the cellular level, the remodeling responses of the RV and LV to pressure overload are largely similar, there are several key differences: the stressed RV is more susceptible to oxidative stress, has a reduced angiogenic response, and is more likely to activate cell death pathways than the stressed LV. Together, these differences could explain the more rapid progression of the RV to failure vs. the LV. This review will highlight known molecular differences between the RV and LV responses to hemodynamic stress, the unique stressors on the RV associated with congenital heart disease, and the need to better understand these molecular mechanisms if we are to develop RV-specific heart failure therapeutics. PMID:26527692

Frasier syndrome with childhood-onset renal failure.

PubMed

Buzi, F; Mella, P; Pilotta, A; Felappi, B; Camerino, G; Notarangelo, L D

2001-01-01

The Wilms' tumour 1 (WT1) gene encodes a protein which is believed to exert transcriptional and tumour-suppressor activities. Mutations of this gene have occasionally been associated with Wilms' tumour (<15% of cases) and, more consistently, with three syndromes characterized by urogenital abnormalities (WAGR, Denys-Drash and Frasier syndrome). SUBJECT/METHOD: A 25-year-old phenotypic female with a 46,XY karyotype presented with amenorrhoea. An ultrasound scan showed streak gonads and a rudimentary uterus. The patient had a history of post-streptococcal glomerulonephrosis, when aged 4 years, which had rapidly progressed to kidney failure, requiring transplantation at age 8. Frasier syndrome was suspected and confirmed by genetic analysis. In fact, direct sequencing of the PCR product of the intron 9 donor splice site revealed a substitution of guanine for adenine in position +5. Besides being one of the few Frasier syndrome cases to be genetically characterized, this case is interesting because of the unusually early-onset renal failure. Copyright 2001 S. Karger AG, Basel

Bmi1 limits dilated cardiomyopathy and heart failure by inhibiting cardiac senescence

PubMed Central

Gonzalez-Valdes, I.; Hidalgo, I.; Bujarrabal, A.; Lara-Pezzi, E.; Padron-Barthe, L.; Garcia-Pavia, P.; Gómez-del Arco, Pablo; Redondo, J.M.; Ruiz-Cabello, J.M.; Jimenez-Borreguero, L.J.; Enriquez, J.A.; de la Pompa, J.L.; Hidalgo, A.; Gonzalez, S.

2015-01-01

Dilated cardiomyopathy (DCM) is the most frequent cause of heart failure and the leading indication for heart transplantation. Here we show that epigenetic regulator and central transcriptional instructor in adult stem cells, Bmi1, protects against DCM by repressing cardiac senescence. Cardiac-specific Bmi1 deletion induces the development of DCM, which progresses to lung congestion and heart failure. In contrast, Bmi1 overexpression in the heart protects from hypertrophic stimuli. Transcriptome analysis of mouse and human DCM samples indicates that p16INK4a derepression, accompanied by a senescence-associated secretory phenotype (SASP), is linked to severely impaired ventricular dimensions and contractility. Genetic reduction of p16INK4a levels reverses the pathology of Bmi1-deficient hearts. In parabiosis assays, the paracrine senescence response underlying the DCM phenotype does not transmit to healthy mice. As senescence is implicated in tissue repair and the loss of regenerative potential in aging tissues, these findings suggest a source for cardiac rejuvenation. PMID:25751743

Mitochondrial tRNAPhe mutation as a cause of end-stage renal disease in childhood

PubMed Central

D’Aco, Kristin E; Manno, Megan; Clarke, Colleen; Ganesh, Jaya; Meyers, Kevin EC; Sondheimer, Neal

2012-01-01

Background We identified a mitochondrial tRNA mutation (m.586G>A) in a patient with renal failure and symptoms consistent with a mitochondrial cytopathy. This mutation was of unclear significance because there were neither consistent reports of linkage to specific disease phenotypes nor an existing analysis of effects upon mitochondrial function. Case-Diagnosis/Treatment A 16-month-old girl with failure-to-thrive, developmental regression, persistent lactic acidosis, hypotonia, GI dysmotility, adrenal insufficiency and hematologic abnormalities developed hypertension and renal impairment with chronic tubulointerstitial fibrosis, progressing to renal failure with need for peritoneal dialysis. Evaluation of her muscle and blood identified a mutation of the mitochondrial tRNA for phenylalanine, m.586G>A. Conclusions The m.586G>A mutation is pathogenic and is a cause of end-stage renal disease in childhood. The mutation interferes with the stability of tRNAPhe and affects the translation of mitochondrial proteins and the stability of the electron transport chain. PMID:23135609

Thioredoxin-2 Inhibits Mitochondrial ROS Generation and ASK1 Activity to Maintain Cardiac Function

PubMed Central

Huang, Qunhua; Zhou, Huanjiao Jenny; Zhang, Haifeng; Huang, Yan; Hinojosa-Kirschenbaum, Ford; Fan, Peidong; Yao, Lina; Belardinelli, Luiz; Tellides, George; Giordano, Frank J.; Budas, Grant R.; Min, Wang

2015-01-01

Background Thioredoxin 2 (Trx2) is a key mitochondrial protein which regulates cellular redox and survival by suppressing mitochondrial ROS generation and by inhibiting apoptosis stress kinase-1 (ASK1)-dependent apoptotic signaling. To date, the role of the mitochondrial Trx2 system in heart failure pathogenesis has not been investigated. Methods and Results Western blot and histological analysis revealed that Trx2 protein expression levels were reduced in hearts from patients with dilated cardiomyopathy (DCM), with a concomitant increase in increased ASK1 phosphorylation/activity. Cardiac-specific Trx2 knockout mice (Trx2-cKO). Trx2-cKO mice develop spontaneous DCM at 1 month of age with increased heart size, reduced ventricular wall thickness, and a progressive decline in left ventricular (LV) contractile function, resulting in mortality due to heart failure by ~4 months of age. The progressive decline in cardiac function observed in Trx2-cKO mice was accompanied by disruption of mitochondrial ultrastructure, mitochondrial membrane depolarization, increased mitochondrial ROS generation and reduced ATP production, correlating with increased ASK1 signaling and increased cardiomyocyte apoptosis. Chronic administration of a highly selective ASK1 inhibitor improved cardiac phenotype and reduced maladaptive LV remodeling with significant reductions in oxidative stress, apoptosis, fibrosis and cardiac failure. Cellular data from Trx2-deficient cardiomyocytes demonstrated that ASK1 inhibition reduced apoptosis and reduced mitochondrial ROS generation. Conclusions Our data support an essential role for mitochondrial Trx2 in preserving cardiac function by suppressing mitochondrial ROS production and ASK1-dependent apoptosis. Inhibition of ASK1 represents a promising therapeutic strategy for the treatment of dilated cardiomyopathy and heart failure. PMID:25628390

A nomogram for predicting distant brain failure in patients treated with gamma knife stereotactic radiosurgery without whole brain radiotherapy

PubMed Central

Ayala-Peacock, Diandra N.; Peiffer, Ann M.; Lucas, John T.; Isom, Scott; Kuremsky, J. Griff; Urbanic, James J.; Bourland, J. Daniel; Laxton, Adrian W.; Tatter, Stephen B.; Shaw, Edward G.; Chan, Michael D.

2014-01-01

Background We review our single institution experience to determine predictive factors for early and delayed distant brain failure (DBF) after radiosurgery without whole brain radiotherapy (WBRT) for brain metastases. Materials and methods Between January 2000 and December 2010, a total of 464 patients were treated with Gamma Knife stereotactic radiosurgery (SRS) without WBRT for primary management of newly diagnosed brain metastases. Histology, systemic disease, RPA class, and number of metastases were evaluated as possible predictors of DBF rate. DBF rates were determined by serial MRI. Kaplan–Meier method was used to estimate rate of DBF. Multivariate analysis was performed using Cox Proportional Hazard regression. Results Median number of lesions treated was 1 (range 1–13). Median time to DBF was 4.9 months. Twenty-seven percent of patients ultimately required WBRT with median time to WBRT of 5.6 months. Progressive systemic disease (χ2= 16.748, P < .001), number of metastases at SRS (χ2 = 27.216, P < .001), discovery of new metastases at time of SRS (χ2 = 9.197, P < .01), and histology (χ2 = 12.819, P < .07) were factors that predicted for earlier time to distant failure. High risk histologic subtypes (melanoma, her2 negative breast, χ2 = 11.020, P < .001) and low risk subtypes (her2 + breast, χ2 = 11.343, P < .001) were identified. Progressive systemic disease (χ2 = 9.549, P < .01), number of brain metastases (χ2 = 16.953, P < .001), minimum SRS dose (χ2 = 21.609, P < .001), and widespread metastatic disease (χ2 = 29.396, P < .001) were predictive of shorter time to WBRT. Conclusion Systemic disease, number of metastases, and histology are factors that predict distant failure rate after primary radiosurgical management of brain metastases. PMID:24558022

Veno-arterial extracorporeal membrane oxygenation for Streptococcus pyogenes toxic shock syndrome in pregnancy.

PubMed

Imaeda, Taro; Nakada, Taka-Aki; Abe, Ryuzo; Tateishi, Yoshihisa; Oda, Shigeto

2016-06-01

Streptococcal toxic shock syndrome (STSS), an invasive Streptococcus pyogenes (Group A streptococcus) infection with hypotension and multiple organ failure, is quite rare in pregnancy but is characterized by rapid disease progression and high fatality rates. We present a case of STSS with infection-induced cardiac dysfunction in a pregnant woman who was treated with veno-arterial extracorporeal membrane oxygenation (VA-ECMO). A 24-year-old multiparous woman in the third trimester had early symptoms of high fever and diarrhea 1 day prior to admission to the hospital emergency department. On admission, she had multiple organ failure including circulatory failure. Due to fetal distress, emergency Cesarean section was carried out and transferred to intensive care units. She had refractory circulatory failure with depressed myocardial contractility with progressive multiple organ failure, despite receiving significant hemodynamic supports including high-dose catecholamine. Thus, VA-ECMO was initiated 18 h after intensive care unit admission. Consequently, ECMO provided extra time to recover from infection and myocardial depression. She was successfully weaned from VA-ECMO on day 7 and was discharged home on day 53. VA-ECMO can be a therapeutic option for refractory circulatory failure with significant myocardial depression in STSS.

Thiols of flagellar proteins are essential for progressive motility in human spermatozoa.

PubMed

Cabrillana, María Eugenia; Monclus, María de Los Ángeles; Lancellotti, Tania Estefania Sáez; Boarelli, Paola Vanina; Vincenti, Amanda Edith; Fornés, Miguel Matias; Sanabria, Eduardo Alfredo; Fornés, Miguel Walter

2017-07-01

Male infertility is a disorder of the reproductive system defined by the failure to achieve a clinical pregnancy after 12 months or more of regular unprotected sexual intercourse. The presence of low-motile or immotile spermatozoa is one of many causes of infertility; however, this observation provides little or no information regarding the pathogenesis of the malfunction. Good sperm motility depends on correct assembly of the sperm tail in the testis and efficient maturation during epididymal transit. Thiols of flagellar proteins, such as outer dense fibre protein 1 (ODF1), are oxidised to form disulfides during epididymal transit and the spermatozoa become motile. This study was designed to determine how oxidative changes in protein thiol status affect progressive motility in human spermatozoa. Monobromobimane (mBBr) was used as a specific thiol marker and disruptor of sperm progressive motility. When mBBr was blocked by dithiothreitol it did not promote motility changes. The analysis of mBBr-treated spermatozoa revealed a reduction of progressive motility and an increased number of spermatozoa with non-progressive motility without affecting ATP production. Laser confocal microscopy and western blot analysis showed that one of the mBBr-positive proteins reacted with an antibody to ODF1. Monobromobimane fluorescence intensity of the sperm tail was lower in normozoospermic than asthenozoospermic men, suggesting that thiol oxidation in spermatozoa of asthenozoospermic men is incomplete. Our findings indicate that mBBr affects the thiol status of ODF1 in human spermatozoa and interferes with progressive motility.

Randomised trial of low-dose amiodarone in severe congestive heart failure. Grupo de Estudio de la Sobrevida en la Insuficiencia Cardiaca en Argentina (GESICA)

PubMed

Doval, H C; Nul, D R; Grancelli, H O; Perrone, S V; Bortman, G R; Curiel, R

1994-08-20

In severe heart failure many deaths are sudden and are presumed to be due to ventricular arrhythmias. The GESICA trial evaluated the effect of low-dose amiodarone on two-year mortality in patients with severe heart failure. Our prospective multicentre trial included 516 patients on optimal standard treatment for heart failure. Patients were randomised to 300 mg/day amiodarone (260) or to standard treatment (256). Intention-to-treat analysis showed 87 deaths in the amiodarone group (33.5%) compared with 106 in the control group (41.4%) (risk reduction 28%; 95% CI 4%-45%; log rank test p = 0.024). There were reductions in both sudden death (risk reduction 27%; p = 0.16) and death due to progressive heart failure (risk reduction 23%; p = 0.16). Fewer patients in the amiodarone group died or were admitted to hospital due to worsening heart failure (119 versus 149 in the control group; risk reduction 31%; 95% CI 13-46%; p = 0.0024). The decrease in mortality and hospital admission was present in all subgroups examined and independent of the presence of non-sustained ventricular tachycardia. Side-effects were reported in 17 patients (6.1%); amiodarone was withdrawn in 12. Low-dose amiodarone proved to be an effective and reliable treatment, reducing mortality and hospital admission in patients with severe heart failure independently of the presence of complex ventricular arrhythmias.

Masitinib in advanced gastrointestinal stromal tumor (GIST) after failure of imatinib: A randomized controlled open-label trial

PubMed Central

Adenis, A.; Blay, J.-Y.; Bui-Nguyen, B.; Bouché, O.; Bertucci, F.; Isambert, N.; Bompas, E.; Chaigneau, L.; Domont, J.; Ray-Coquard, I.; Blésius, A.; Van Tine, B. A.; Bulusu, V. R.; Dubreuil, P.; Mansfield, C. D.; Acin, Y.; Moussy, A.; Hermine, O.; Le Cesne, A.

2014-01-01

Background Masitinib is a highly selective tyrosine kinase inhibitor with activity against the main oncogenic drivers of gastrointestinal stromal tumor (GIST). Masitinib was evaluated in patients with advanced GIST after imatinib failure or intolerance. Patients and methods Prospective, multicenter, randomized, open-label trial. Patients with inoperable, advanced imatinib-resistant GIST were randomized (1 : 1) to receive masitinib (12 mg/kg/day) or sunitinib (50 mg/day 4-weeks-on/2-weeks-off) until progression, intolerance, or refusal. Primary efficacy analysis was noncomparative, testing whether masitinib attained a median progression-free survival (PFS) (blind centrally reviewed RECIST) threshold of >3 months according to the lower bound of the 90% unilateral confidence interval (CI). Secondary analyses on overall survival (OS) and PFS were comparative with results presented according to a two-sided 95% CI. Results Forty-four patients were randomized to receive masitinib (n = 23) or sunitinib (n = 21). Median follow-up was 14 months. Patients receiving masitinib experienced less toxicity than those receiving sunitinib, with significantly lower occurrence of severe adverse events (52% versus 91%, respectively, P = 0.008). Median PFS (central RECIST) for the noncomparative primary analysis in the masitinib treatment arm was 3.71 months (90% CI 3.65). Secondary analyses showed that median OS was significantly longer for patients receiving masitinib followed by post-progression addition of sunitinib when compared against patients treated directly with sunitinib in second-line [hazard ratio (HR) = 0.27, 95% CI 0.09–0.85, P = 0.016]. This improvement was sustainable as evidenced by 26-month follow-up OS data (HR = 0.40, 95% CI 0.16–0.96, P = 0.033); an additional 12.4 months survival advantage being reported for the masitinib treatment arm. Risk of progression while under treatment with masitinib was in the same range as for sunitinib (HR = 1.1, 95% CI 0.6–2.2, P = 0.833). Conclusions Primary efficacy analysis ensured the masitinib treatment arm could satisfy a prespecified PFS threshold. Secondary efficacy analysis showed that masitinib followed by the standard of care generated a statistically significant survival benefit over standard of care. Encouraging median OS and safety data from this well-controlled and appropriately designed randomized trial indicate a positive benefit–risk ratio. Further development of masitinib in imatinib-resistant/intolerant patients with advanced GIST is warranted. PMID:25122671

Research, development and demonstration of nickel-zinc batteries for electric vehicle propulsion

NASA Astrophysics Data System (ADS)

1980-06-01

The feasibility of the nickel zinc battery for electric vehicle propulsion is discussed. The program is divided into seven distinct but highly interactive tasks collectively aimed at the development and commercialization of nickel zinc technology. These basic technical tasks are separator development, electrode development, product design and analysis, cell/module battery testing, process development, pilot manufacturing, and thermal manufacturing, and thermal management. Significant progress has been made in the understanding of separator failure mechanisms, and a generic category of materials has been specified for the 300+ deep discharge applications. Shape change has been reduced significantly. Progress in the area of thermal management was significant, with the development of a model that accurately represents heat generation and rejection rates during battery operation.

Damage Simulation in Non-Crimp Fabric Composite Plates Subjected to Impact Loads

NASA Technical Reports Server (NTRS)

Satyanarayana, Arunkumar; Bogert, Philip B.; Aitharaju, Venkat; Aashat, Satvir; Kia, Hamid

2014-01-01

Progressive failure analysis (PFA) of non-crimp fabric (NCF) composite laminates subjected to low velocity impact loads was performed using the COmplete STress Reduction (COSTR) damage model implemented through VUMAT and UMAT41 user subroutines in the frame works of the commercial finite element programs ABAQUS/Explicit and LS-DYNA, respectively. To validate the model, low velocity experiments were conducted and detailed correlations between the predictions and measurements for both intra-laminar and inter-laminar failures were made. The developed material and damage model predicts the peak impact load and duration very close with the experimental results. Also, the simulation results of delamination damage between the ply interfaces, in-plane matrix damages and fiber damages were all in good agreement with the measurements from the non-destructive evaluation data.

LOW-LEVEL RADIOACTIVE WASTE: POLICY FAILURE, REGIONAL FAILURE. (R823191)

EPA Science Inventory

The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

Gene-Specific Demethylation as Targeted Therapy in MDS

DTIC Science & Technology

2017-07-01

SUPPLEMENTARY NOTES 14. ABSTRACT Myelodysplastic Syndromes (MDS) are a group of clonal hematopoietic disorders characterized by bone marrow failure and...clonal hematopoietic disorders characterized by bone marrow failure and risk of progression to Acute Myeloid Leukemia (AML) in approximately 30 percent

Full-scale testing and progressive damage modeling of sandwich composite aircraft fuselage structure

NASA Astrophysics Data System (ADS)

Leone, Frank A., Jr.

A comprehensive experimental and computational investigation was conducted to characterize the fracture behavior and structural response of large sandwich composite aircraft fuselage panels containing artificial damage in the form of holes and notches. Full-scale tests were conducted where panels were subjected to quasi-static combined pressure, hoop, and axial loading up to failure. The panels were constructed using plain-weave carbon/epoxy prepreg face sheets and a Nomex honeycomb core. Panel deformation and notch tip damage development were monitored during the tests using several techniques, including optical observations, strain gages, digital image correlation (DIC), acoustic emission (AE), and frequency response (FR). Additional pretest and posttest inspections were performed via thermography, computer-aided tap tests, ultrasound, x-radiography, and scanning electron microscopy. The framework to simulate damage progression and to predict residual strength through use of the finite element (FE) method was developed. The DIC provided local and full-field strain fields corresponding to changes in the state-of-damage and identified the strain components driving damage progression. AE was monitored during loading of all panels and data analysis methodologies were developed to enable real-time determination of damage initiation, progression, and severity in large composite structures. The FR technique has been developed, evaluating its potential as a real-time nondestructive inspection technique applicable to large composite structures. Due to the large disparity in scale between the fuselage panels and the artificial damage, a global/local analysis was performed. The global FE models fully represented the specific geometries, composite lay-ups, and loading mechanisms of the full-scale tests. A progressive damage model was implemented in the local FE models, allowing the gradual failure of elements in the vicinity of the artificial damage. A set of modifications to the definitions of the local FE model boundary conditions is proposed and developed to address several issues related to the scalability of progressive damage modeling concepts, especially in regards to full-scale fuselage structures. Notable improvements were observed in the ability of the FE models to predict the strength of damaged composite fuselage structures. Excellent agreement has been established between the FE model predictions and the experimental results recorded by DIC, AE, FR, and visual observations.

Primary failure of eruption: further characterization of a rare eruption disorder.

PubMed

Frazier-Bowers, Sylvia A; Koehler, Karen E; Ackerman, James L; Proffit, William R

2007-05-01

Posterior open bite has several possible causes, including primary failure of eruption (PFE) that affects all teeth distal to the most mesial involved tooth, mechanical failure of eruption (MFE) (primarily ankylosis) that affects only the involved tooth or teeth, and soft-tissue interferences with eruption (other). Radiographs and other clinical records for 97 cases of failure of posterior eruption submitted for consultation were analyzed to further characterize PFE and distinguish it from MFE. Of the 97 cases, 38 were judged to be clear-cut PFE; 19 were diagnosed as MFE; 32 were classified as indeterminate failure because they were too young to be certain of the distinction between PFE and MFE; and 8 were placed in the "other" category. Two subtypes of PFE were observed. In type 1, eruption failure occurred at or near the same time for all teeth in an affected quadrant. In type 2, a gradient of the time of failure was present, so that some further development of the teeth posterior to the most mesial affected tooth was observed before eruption failure. A family history of eruption problems was noted in 10 of the 38 PFE subjects (26%), and a pedigree analysis was done for 4 families. This was consistent with autosomal dominant transmission. The distinction between PFE and MFE is clinically important because it determines whether all posterior teeth, or only individual affected teeth, will not respond to orthodontic force. Certain diagnosis often requires progress radiographs so that the pattern of eruption of teeth distal to the most mesial affected tooth can be observed.

Robotic high-intensity focused ultrasound (rHIFU) for the prostate cancer treatment

NASA Astrophysics Data System (ADS)

Solovov, Vyacheslav; Shaplygin, Leonid; Vozdvizhenskiy, Mikhail

2012-11-01

Introduction & Objectives: rHIFU shows a successful treatment for localized prostate cancer (PC). Here we explored the effectiveness of the rHIFU treatment for the prostate cancer, hormone-resistant prostate cancer (HRPC) and failure after external beam radiotherapy (EBRT) and radical prostatectomy (RPE). Materials & Methods: 748 patients were treated in our center between Sep 2007 - February 2012: 137 - hormone-resistance (median time before hormone-resistance 25 months), 286 - received neoadjuvant hormone therapy 6 months, 293 - no treatment before HIFU, 32 - after the EBRT failure. 667 patients underwent TURP+rHIFU, 81 only rHIFU (volume prostate <40cc). Mean follow-up is 38 months (range 3-52). All patients were divided into 3 groups: low risk progression (Gleason <7, stage T1-2N0M0, PSA<20, n= 465), high risk progression - (Gleason ≤9, stage T2-3N0M0, PSA <60, n= 251), after EBRT and RPE failure (n= 39). The mean age of the whole group of patients were 70 (52-89) years, mean prostate volume - 39 (5,5-108) cc. Results: Median PSA level 12 months after rHIFU treatment were 0,04 (0-2,24) ng/ml - low risk group, for high risk group - 0,5 (0-48,4) ng/ml, with failure after EBRT and RPE- 0,5 (0-3,2) ng/ml; 36 months after rHIFU treatment were 0,5 (0,02-3,6) ng/ml - low risk group, for high risk group - 3,2 (0-21,38) ng/ml, with failure after EBRT and RPE - 1,7 (0-9,8) ng/ml. Patients with low risk had 4,5% of progression, with high risk PC - 25%, with failure after EBRT and RPE - 19,6%. Kaplan-Meir analyses of the total group indicated that the risk of progression after 1 year follow-up was 10%, the risk of progression was 23% after 4 years of follow-up. Complications: incontinence I - 17,5%, incontinence II - 7,7%, stricture - 18,2%, fistula - 0,3 %. Conclusions: Our experience shows that rHIFU ablation is safe, minimally invasive, effective treatment with moderate side effects for the PC, hormone-resistant prostate cancer, rHIFU also may be used as a salvage therapy after EBRF. Further studies are required.

Disruption of Calcium Homeostasis during Exercise as a Mediator of Bone Metabolism

DTIC Science & Technology

2014-10-01

2013. We met the goal of having 14 women and 14 men complete EXP1. Progress on EXP1: Enrolled Screen Withdrew Randomized Withdrew Completed Failure...Before After Randomized Randomized Women 18 2 1 15 1 14 Men 22 2 3 17 3 14 Total 40 4 4 32 4 28 Reasons for withdrawals: Screening failures...Prepare annual progress report in Q4 This was accomplished. • Data from EXP1 As planned, 14 women and 14 men completed EXP1. The characteristics of

Progressive failure methodologies for predicting residual strength and life of laminated composites

NASA Technical Reports Server (NTRS)

Harris, Charles E.; Allen, David H.; Obrien, T. Kevin

1991-01-01

Two progressive failure methodologies currently under development by the Mechanics of Materials Branch at NASA Langley Research Center are discussed. The damage tolerance/fail safety methodology developed by O'Brien is an engineering approach to ensuring adequate durability and damage tolerance by treating only delamination onset and the subsequent delamination accumulation through the laminate thickness. The continuum damage model developed by Allen and Harris employs continuum damage laws to predict laminate strength and life. The philosophy, mechanics framework, and current implementation status of each methodology are presented.

Chlamydia vaccine candidates and tools for chlamydial antigen discovery.

PubMed

Rockey, Daniel D; Wang, Jie; Lei, Lei; Zhong, Guangming

2009-10-01

The failure of the inactivated Chlamydia-based vaccine trials in the 1960s has led researchers studying Chlamydia to take cautious and rational approaches to develop safe and effective chlamydial vaccines. Subsequent research efforts focused on three areas. The first is the analysis of the immunobiology of chlamydial infection in animal models, with supporting clinical studies, to identify the immune correlates of both protective immunity and pathological responses. Second, recent radical improvements in genomics, proteomics and associated technologies have assisted in the implementation of creative approaches to search for suitable vaccine candidates. Third, progress in the analysis of host response and adjuvanticity regulating both innate and adaptive immunity at the mucosal site of infection has led to progress in the design of optimal delivery and adjuvant systems for enhancing protective immunity. Considerable progress has been made in the first two areas but research efforts to better define the factors that regulate immunity at mucosal sites of infection and to develop strategies to boost protective immunity via immunomodulation, effective delivery systems and potent adjuvants, have remained elusive. In this article, we will summarize progress in these areas with a focus on chlamydial vaccine antigen discovery, and discuss future directions towards the development of a safe and effective chlamydial vaccine.

Is depressed myocyte contractility centrally involved in heart failure?

PubMed

Houser, Steven R; Margulies, Kenneth B

2003-03-07

This review examines the evidence for and against the hypothesis that abnormalities in cardiac contractility initiate the heart failure syndrome and drive its progression. There is substantial evidence that the contractility of failing human hearts is depressed and that abnormalities of basal Ca2+ regulation and adrenergic regulation of Ca2+ signaling are responsible. The cellular and molecular defects that cause depressed myocyte contractility are not well established but seem to culminate in abnormal sarcoplasmic reticulum uptake, storage, and release. There are also strong links between Ca2+ regulation, Ca2+ signaling pathways, hypertrophy, and heart failure that need to be more clearly delineated. There is not substantial direct evidence for a causative role for depressed contractility in the initiation and progression of human heart failure, and some studies show that heart failure can occur without depressed myocyte contractility. Stronger support for a causal role for depressed contractility in the initiation of heart failure comes from animal studies where maintaining or improving contractility can prevent heart failure. Recent clinical studies in humans also support the idea that beneficial heart failure treatments, such as beta-adrenergic antagonists, involve improved contractility. Current or previously used heart failure treatments that increase contractility, primarily by increasing cAMP, have generally increased mortality. Novel heart failure therapies that increase or maintain contractility or adrenergic signaling by selectively modulating specific molecules have produced promising results in animal experiments. How to reliably implement these potentially beneficial inotropic therapies in humans without introducing negative side effects is the major unanswered question in this field.

Management of Systemic Right Ventricular Failure in Patients With Congenitally Corrected Transposition of the Great Arteries.

PubMed

Filippov, Aleksei A; Del Nido, Pedro J; Vasilyev, Nikolay V

2016-10-25

In recent decades, significant progress has been made in the diagnosis and management of congenitally corrected transposition of the great arteries (ccTGA). Nevertheless, gradual dysfunction and failure of the right ventricle (RV) in the systemic circulation remain the main contributors to mortality and disability for patients with ccTGA, especially after adolescence. Anatomic repair of ccTGA effectively resolves the problem of failure of the systemic RV and has good early and midterm results. However, this strategy is applicable primarily in infants and children up to their teens and has associated risks and limitations, and new challenges can arise in the late postoperative period. Patients with ccTGA manifesting progressive systemic RV dysfunction beyond adolescence represent the major challenge. Several palliative options such as cardiac resynchronization therapy, tricuspid valve repair or replacement, pulmonary artery banding, and implantation of an assist device into the systemic RV can be used to improve functional status and to delay the progression of ventricular dysfunction in patients who are not suitable for anatomic correction of ccTGA. For adult patients with severe systemic RV failure, heart transplantation currently remains the only long-term lifesaving procedure, although donor organ availability remains one of the most limiting factors in this type of therapy. This review focuses on current surgical and medical strategies and interventional options for the prevention and management of systemic RV failure in adults and children with ccTGA. © 2016 American Heart Association, Inc.

Early initiation of night-time NIV in an outpatient setting: a randomized non-inferiority study in ALS patients.

PubMed

Bertella, Enrica; Banfi, Paolo; Paneroni, Mara; Grilli, Silvia; Bianchi, Luca; Volpato, Eleonora; Vitacca, Michele

2017-12-01

In patients with amyotrophic lateral sclerosis (ALS), non-invasive ventilation (NIV) is usually initiated in an in-hospital regime. We investigated if NIV initiated in an outpatient setting can be as effective in terms of patients' acceptance/adherence. We also evaluated factors predicting NIV acceptance and adherence and disease progression. Prospective randomized study. Outpatient versus inpatient rehabilitation. ALS patients. ALS patients were randomized to two groups for NIV initiation: outpatients versus inpatients. At baseline (T0), end of NIV trial program (T1) and after 3 months from T1 (T2), respiratory function tests, blood gas analysis, and sleep study were performed. At T1, we assessed: NIV acceptance (>4 h/night), and dyspnea symptoms (day/night) by Visual analogue scale (VAS), staff and patients' experience (how difficult NIV was to accept, how difficult ventilator was to manage, satisfaction); at T2: NIV adherence (>120 h/month) and patients' experience. Fifty patients participated. There were no differences in acceptance failure (P=0.733) or adherence failure (P=0.529). At T1, outpatients had longer hours of nocturnal ventilation (P<0.02), at T2 this was similar (P=0.34). Female gender and spinal onset of the disease were predictors for NIV acceptance/adherence failure. There were no between-group differences in progression of respiratory impairment, symptoms and sleep quality. Early outpatient initiation of NIV in ALS is as effective as inpatient initiation.

Unified Approach to the Biomechanics of Dental Implantology

NASA Technical Reports Server (NTRS)

Grenoble, D. E.; Knoell, A. C.

1973-01-01

The human need for safe and effective dental implants is well-recognized. Although many implant designs have been tested and are in use today, a large number have resulted in clinical failure. These failures appear to be due to biomechanical effects, as well as biocompatibility and surgical factors. A unified approach is proposed using multidisciplinary systems technology, for the study of the biomechanical interactions between dental implants and host tissues. The approach progresses from biomechanical modeling and analysis, supported by experimental investigations, through implant design development, clinical verification, and education of the dental practitioner. The result of the biomechanical modeling, analysis, and experimental phases would be the development of scientific design criteria for implants. Implant designs meeting these criteria would be generated, fabricated, and tested in animals. After design acceptance, these implants would be tested in humans, using efficient and safe surgical and restorative procedures. Finally, educational media and instructional courses would be developed for training dental practitioners in the use of the resulting implants.

Infiltration of tumour-associated macrophages in prostate biopsy specimens is predictive of disease progression after hormonal therapy for prostate cancer.

PubMed

Nonomura, Norio; Takayama, Hitoshi; Nakayama, Masashi; Nakai, Yasutomo; Kawashima, Atsunari; Mukai, Masatoshi; Nagahara, Akira; Aozasa, Katsuyuki; Tsujimura, Akira

2011-06-01

• To evaluate tumour-associated macrophage (TAM) infiltration in prostate biopsy specimens as a possible prognostic factor for prostate cancer (PCa) after hormonal therapy. • Immunostaining of TAMs in prostate biopsy specimens was performed using a monoclonal antibody CD68 for 71 patients having PCa treated with hormonal therapy. • Six microscopic (×400) fields around the cancer foci were selected for TAM counting. • The median value of serum prostate-specific antigen (PSA) was 50.1 ng/mL, and the median TAM count was 22. • Recurrence-free survival was significantly better in patients with fewer TAMs (<22) than in those with higher numbers of TAMs (≥22) (P < 0.001). • TAM count was higher in those with higher serum PSA (PSA), higher Gleason score, clinical T stage or those with PSA failure. Cox multivariate analysis showed that TAM count is one of the prognostic factors for PCa treated by hormonal therapy (P < 0.0001). • TAM infiltration in prostate needle biopsy specimens is a useful predictive factor for PSA failure or progression of PCa after hormonal therapy. © 2010 THE AUTHORS. BJU INTERNATIONAL © 2010 BJU INTERNATIONAL.

Considerations for analysis of time-to-event outcomes measured with error: Bias and correction with SIMEX.

PubMed

Oh, Eric J; Shepherd, Bryan E; Lumley, Thomas; Shaw, Pamela A

2018-04-15

For time-to-event outcomes, a rich literature exists on the bias introduced by covariate measurement error in regression models, such as the Cox model, and methods of analysis to address this bias. By comparison, less attention has been given to understanding the impact or addressing errors in the failure time outcome. For many diseases, the timing of an event of interest (such as progression-free survival or time to AIDS progression) can be difficult to assess or reliant on self-report and therefore prone to measurement error. For linear models, it is well known that random errors in the outcome variable do not bias regression estimates. With nonlinear models, however, even random error or misclassification can introduce bias into estimated parameters. We compare the performance of 2 common regression models, the Cox and Weibull models, in the setting of measurement error in the failure time outcome. We introduce an extension of the SIMEX method to correct for bias in hazard ratio estimates from the Cox model and discuss other analysis options to address measurement error in the response. A formula to estimate the bias induced into the hazard ratio by classical measurement error in the event time for a log-linear survival model is presented. Detailed numerical studies are presented to examine the performance of the proposed SIMEX method under varying levels and parametric forms of the error in the outcome. We further illustrate the method with observational data on HIV outcomes from the Vanderbilt Comprehensive Care Clinic. Copyright © 2017 John Wiley & Sons, Ltd.

Prospective study on the potential of RAAS blockade to halt renal disease in Alport syndrome patients with heterozygous mutations.

PubMed

Stock, Johanna; Kuenanz, Johannes; Glonke, Niklas; Sonntag, Joseph; Frese, Jenny; Tönshoff, Burkhard; Höcker, Britta; Hoppe, Bernd; Feldkötter, Markus; Pape, Lars; Lerch, Christian; Wygoda, Simone; Weber, Manfred; Müller, Gerhard-Anton; Gross, Oliver

2017-01-01

Patients with autosomal or X-linked Alport syndrome (AS) with heterozygous mutations in type IV collagen genes have a 1-20 % risk of progressing to end-stage renal disease during their lifetime. We evaluated the long-term renal outcome of patients at risk of progressive disease (chronic kidney disease stages 1-4) with/without nephroprotective therapy. This was a prospective, non-interventional, observational study which included data from a 4-year follow-up of AS patients with heterozygous mutations whose datasets had been included in an analysis of the 2010 database of the European Alport Registry. Using Kaplan-Meier estimates and logrank tests, we prospectively analyzed the updated datasets of 52 of these patients and 13 new datasets (patients added to the Registry after 2011). The effects of therapy, extrarenal symptoms and inheritance pattern on renal outcome were analyzed. The mean prospective follow-up was 46 ± 10 months, and the mean time on therapy was 8.4 ± 4.4 (median 7; range 2-18) years. The time from the appearance of the first symptom to diagnosis was 8.1 ± 14.2 (range 0-52) years. At the time of starting therapy, 5.4 % of patients had an estimated glomerular filtration rate of <60 ml/min, 67.6 % had proteinuria and 27.0 % had microalbuminuria. Therapeutic strategies included angiotensin-converting enzymer inhibitors (97.1 %), angiotensin receptor antagonists (1 patient), dual therapy (11.8 %) and statins (8.8 %). Among patients included in the prospective dataset, prevented the need for dialysis. Among new patients, no patient at risk for renal failure progressed to the next disease stage after 4 years follow-up; three patients even regressed to a lower stage during therapy. Treatment with blockers of the renin-angiotensin-aldosterone system prevents progressive renal failure in AS patients with heterozygous mutations in the genes causing AS. Considerable numbers of aging AS patients on dialysis may have heterozygous mutations in these genes (present in 1 % of total population) as underlying disease. Hence, greater alertness towards timely diagnosis and therapy has the potential to prevent progressive renal failure in most-if not all-AS patients with heterozygous mutations in the causal genes.

Accelerated Aging Experiments for Prognostics of Damage Growth in Composite Materials

NASA Technical Reports Server (NTRS)

Saxena, Abhinav; Goebel, Kai Frank; Larrosa, Cecilia C.; Janapati, Vishnuvardhan; Roy, Surajit; Chang, Fu-Kuo

2011-01-01

Composite structures are gaining importance for use in the aerospace industry. Compared to metallic structures their behavior is less well understood. This lack of understanding may pose constraints on their use. One possible way to deal with some of the risks associated with potential failure is to perform in-situ monitoring to detect precursors of failures. Prognostic algorithms can be used to predict impending failures. They require large amounts of training data to build and tune damage model for making useful predictions. One of the key aspects is to get confirmatory feedback from data as damage progresses. These kinds of data are rarely available from actual systems. The next possible resource to collect such data is an accelerated aging platform. To that end this paper describes a fatigue cycling experiment with the goal to stress carbon-carbon composite coupons with various layups. Piezoelectric disc sensors were used to periodically interrogate the system. Analysis showed distinct differences in the signatures of growing failures between data collected at conditions. Periodic X-radiographs were taken to assess the damage ground truth. Results after signal processing showed clear trends of damage growth that were correlated to damage assessed from the X-ray images.

On Classification in the Study of Failure, and a Challenge to Classifiers

NASA Technical Reports Server (NTRS)

Wasson, Kimberly S.

2003-01-01

Classification schemes are abundant in the literature of failure. They serve a number of purposes, some more successfully than others. We examine several classification schemes constructed for various purposes relating to failure and its investigation, and discuss their values and limits. The analysis results in a continuum of uses for classification schemes, that suggests that the value of certain properties of these schemes is dependent on the goals a classification is designed to forward. The contrast in the value of different properties for different uses highlights a particular shortcoming: we argue that while humans are good at developing one kind of scheme: dynamic, flexible classifications used for exploratory purposes, we are not so good at developing another: static, rigid classifications used to trap and organize data for specific analytic goals. Our lack of strong foundation in developing valid instantiations of the latter impedes progress toward a number of investigative goals. This shortcoming and its consequences pose a challenge to researchers in the study of failure: to develop new methods for constructing and validating static classification schemes of demonstrable value in promoting the goals of investigations. We note current productive activity in this area, and outline foundations for more.

Nonesterified fatty acids and development of graft failure in renal transplant recipients.

PubMed

Klooster, Astrid; Hofker, H Sijbrand; Navis, Gerjan; Homan van der Heide, Jaap J; Gans, Reinold O B; van Goor, Harry; Leuvenink, Henri G D; Bakker, Stephan J L

2013-06-15

Chronic transplant dysfunction is the most common cause of graft failure on the long term. Proteinuria is one of the cardinal clinical signs of chronic transplant dysfunction. Albumin-bound fatty acids (FA) have been hypothesized to be instrumental in the etiology of renal damage induced by proteinuria. We therefore questioned whether high circulating FA could be associated with an increased risk for future development of graft failure in renal transplant recipients (RTR). To this end, we prospectively investigated the association of fasting concentrations of circulating nonesterified FA (NEFA) with the development of graft failure in RTR. Baseline measurements were performed between 2001 and 2003 in outpatient RTR with a functioning graft of more than 1 year. Follow-up was recorded until May 19, 2009. Graft failure was defined as return to dialysis or retransplantation. We included 461 RTR at a median (interquartile range [IQR]) of 6.1 (3.3-11.3) years after transplantation. Median (IQR) fasting concentrations of NEFA were 373 (270-521) μM/L. Median (IQR) follow-up for graft failure beyond baseline was 7.1 (6.1-7.5) years. Graft failure occurred in 23 (15%), 14 (9%), and 9 (6%) of RTR across increasing gender-specific tertiles of NEFA (P=0.04). In a gender-adjusted Cox-regression analysis, log-transformed NEFA level was inversely associated with the development of graft failure (hazard ratio, 0.61; 95% confidence interval, 0.47-0.81; P<0.001). In this prospective cohort study in RTR, we found an inverse association between fasting NEFA concentrations and risk for development of graft failure. This association suggests a renoprotective rather than a tubulotoxic effect of NEFA. Further studies on the role of different types of NEFA in the progression of renal disease are warranted.

Preventing distal pullout of posterior spine instrumentation in thoracic hyperkyphosis: a biomechanical analysis.

PubMed

Sun, Edward; Alkalay, Ron; Vader, David; Snyder, Brian D

2009-06-01

An in vitro biomechanical study. Compare the mechanical behavior of 5 different constructs used to terminate dual-rod posterior spinal instrumentation in resisting forward flexion moment. Failure of the distal fixation construct can be a significant problem for patients undergoing surgical treatment for thoracic hyperkyphosis. We hypothesize that augmenting distal pedicle screws with infralaminar hooks or sublaminar cables significantly increases the strength and stiffness of these constructs. Thirty-seven thoracolumbar (T12 to L2) calf spines were implanted with 5 configurations of distal constructs: (1) infralaminar hooks, (2) sublaminar cables, (3) pedicle screws, (4) pedicle screws+infralaminar hooks, and (5) pedicle screws+sublaminar cables. Progressive bending moment was applied to each construct until failure. The mode of failure was noted and the construct's stiffness and failure load determined from the load-displacement curves. Bone density and vertebral dimensions were equivalent among the groups (F=0.1 to 0.9, P>0.05). One-way analysis of covariance (adjusted for differences in density and vertebral dimension) demonstrated that all of the screw-constructs (screw, screw+hook, and screw+cable) exhibited significantly higher stiffness and ultimate failure loads compared with either sublaminar hook or cable alone (P<0.05). The screw+hook constructs (109+/-11 Nm/mm) were significantly stiffer than either screws alone (88+/-17 Nm/mm) or screw+cable (98+/-13 Nm/mm) constructs, P<0.05. Screw+cable construct exhibited significantly higher failure load (1336+/-328 N) compared with screw constructs (1102+/-256 N, P<0.05), whereas not statistically different from the screw+hook construct (1220+/-75 N). The cable and hook constructs failed by laminar fracture, screw construct failed in uniaxial shear (pullout), whereas the screws+(hooks or wires) failed by fracture of caudal vertebral body. Posterior dual rod constructs fixed distally using pedicle screws were stiffer and stronger in resisting forward flexion compared with cables or hooks alone. Augmenting these screws with either infralaminar hooks or sublaminar cables provided additional resistance to failure.

The gut-kidney axis in chronic renal failure: A new potential target for therapy.

PubMed

Khoury, Tawfik; Tzukert, Keren; Abel, Roy; Abu Rmeileh, Ayman; Levi, Ronen; Ilan, Yaron

2017-07-01

Evidence is accumulating to consider the gut microbiome as a central player in the gut-kidney axis. Microbiome products, such as advanced glycation end products, phenols, and indoles, are absorbed into the circulation but are cleared by normal-functioning kidneys. These products then become toxic and contribute to the uremic load and to the progression of chronic kidney failure. In this review, we discuss the gut-kidney interaction under the state of chronic kidney failure as well as the potential mechanisms by which a change in the gut flora (termed gut dysbiosis) in chronic kidney disease (CKD) exacerbates uremia and leads to further progression of CKD and inflammation. Finally, the potential therapeutic interventions to target the gut microbiome in CKD are discussed. © 2016 International Society for Hemodialysis.

A peripheral blood transcriptome biomarker test to diagnose functional recovery potential in advanced heart failure.

PubMed

Deng, Mario C

2018-05-08

Heart failure (HF) is a complex clinical syndrome that causes systemic hypoperfusion and failure to meet the body's metabolic demands. In an attempt to compensate, chronic upregulation of the sympathetic nervous system and renin-angiotensin-aldosterone leads to further myocardial injury, HF progression and reduced O 2 delivery. This triggers progressive organ dysfunction, immune system activation and profound metabolic derangements, creating a milieu similar to other chronic systemic diseases and presenting as advanced HF with severely limited prognosis. We hypothesize that 1-year survival in advanced HF is linked to functional recovery potential (FRP), a novel clinical composite parameter that includes HF severity, secondary organ dysfunction, co-morbidities, frailty, disabilities as well as chronological age and that can be diagnosed by a molecular biomarker.

Treatment carryover impacts on effectiveness of intraocular pressure lowering agents, estimated by a discrete event simulation model.

PubMed

Denis, P; Le Pen, C; Umuhire, D; Berdeaux, G

2008-01-01

To compare the effectiveness of two treatment sequences, latanoprost-latanoprost timolol fixed combination (L-LT) versus travoprost-travoprost timolol fixed combination (T-TT), in the treatment of open-angle glaucoma (OAG) or ocular hypertension (OHT). A discrete event simulation (DES) model was constructed. Patients with either OAG or OHT were treated first-line with a prostaglandin, either latanoprost or travoprost. In case of treatment failure, patients were switched to the specific prostaglandin-timolol sequence LT or TT. Failure was defined as intraocular pressure higher than or equal to 18 mmHg at two visits. Time to failure was estimated from two randomized clinical trials. Log-rank tests were computed. Linear functions after log-log transformation were used to model time to failure. The time horizon of the model was 60 months. Outcomes included treatment failure and disease progression. Sensitivity analyses were performed. Latanoprost treatment resulted in more treatment failures than travoprost (p<0.01), and LT more than TT (p<0.01). At 60 months, the probability of starting a third treatment line was 39.2% with L-LT versus 29.9% with T-TT. On average, L-LT patients developed 0.55 new visual field defects versus 0.48 for T-TT patients. The probability of no disease progression at 60 months was 61.4% with L-LT and 65.5% with T-TT. Based on randomized clinical trial results and using a DES model, the T-TT sequence was more effective at avoiding starting a third line treatment than the L-LT sequence. T-TT treated patients developed less glaucoma progression.

Characteristics and Course of Heart Failure Stages A-B and Determinants of Progression - design and rationale of the STAAB cohort study.

PubMed

Wagner, Martin; Tiffe, Theresa; Morbach, Caroline; Gelbrich, Götz; Störk, Stefan; Heuschmann, Peter U

2017-03-01

Background Data from the general population on the natural course of heart failure is lacking. The objectives of the STAAB cohort study are to determine the prevalence of heart failure stages A-B in a representative sample of the general population and to prospectively investigate the progression from asymptomatic cardiac dysfunction into symptomatic heart failure. Here we present study design, participation rates and baseline characteristics of the first 1468 enrolled subjects. Methods A random sample of inhabitants from the city of Würzburg stratified by age (30-79 years) and gender was drawn from the local registration office. Subjects receive invitation letters, while send-out batches are continuously adapted to response rates by age and gender. At baseline examination, data on echocardiographic cardiac function, comorbidities and preclinical cardiovascular phenotypes are collected. After 3-5 years, changes in cardiac function and occurrence of clinical events will be assessed in a follow-up visit. Results Between December 2013 and April 2015, 4499 subjects were invited; of those, 1510 (34.6%) responded positively, and 1468 were examined (32.6%). Stratified recruitment was on-target while the participation rate was highest in subjects aged 60-69 years (38%). Hypertension (42%) and dyslipidaemia (37%) were the most commonly reported comorbidities; 7% reported on diabetes and 23% of men ( vs. 17% of women) were smokers. Conclusions STAAB recruits a representative population-based sample suited to provide reliable estimates of the frequency of asymptomatic cardiac dysfunction and determinants of disease progression into symptomatic heart failure. These findings will build the ground for developing preventive strategies for heart failure at different stages of the disease continuum.

Role of predisposition, injury, response and organ failure in the prognosis of patients with acute-on-chronic liver failure: a prospective cohort study

PubMed Central

2012-01-01

Introduction Acute deterioration of cirrhosis is associated with high mortality rates particularly in the patients who develop organ failure (OF), a condition that is referred to as acute-on-chronic liver failure (ACLF), which is currently not completely defined. This study aimed to determine the role of predisposing factors, the nature of the precipitating illness and inflammatory response in the progression to OF according to the PIRO (predisposition, injury, response, organ failure) concept to define the risk of in-hospital mortality. Methods A total of 477 patients admitted with acute deterioration of cirrhosis following a defined precipitant over a 5.5-year period were prospectively studied. Baseline clinical, demographic and biochemical data were recorded for all patients and extended serial data from the group that progressed to OF were analysed to define the role of PIRO in determining in-hospital mortality. Results One hundred and fifty-nine (33%) patients developed OF, of whom 93 patients died (58%) compared with 25/318 (8%) deaths in the non-OF group (P < 0.0001). Progression to OF was associated with more severe underlying liver disease and inflammation. In the OF group, previous hospitalisation (P of PIRO); severity of inflammation and lack of its resolution (R of PIRO); and severity of organ failure (O of PIRO) were associated with significantly greater risk of death. In the patients who recovered from OF, mortality at three years was almost universal. Conclusions The results of this prospective study shows that the occurrence of OF alters the natural history of cirrhosis. A classification based on the PIRO concept may allow categorization of patients into distinct pathophysiologic and prognostic groups and allow a multidimensional definition of ACLF. PMID:23186071

Probabilistic structural analysis methods of hot engine structures

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Hopkins, D. A.

1989-01-01

Development of probabilistic structural analysis methods for hot engine structures at Lewis Research Center is presented. Three elements of the research program are: (1) composite load spectra methodology; (2) probabilistic structural analysis methodology; and (3) probabilistic structural analysis application. Recent progress includes: (1) quantification of the effects of uncertainties for several variables on high pressure fuel turbopump (HPFT) turbine blade temperature, pressure, and torque of the space shuttle main engine (SSME); (2) the evaluation of the cumulative distribution function for various structural response variables based on assumed uncertainties in primitive structural variables; and (3) evaluation of the failure probability. Collectively, the results demonstrate that the structural durability of hot engine structural components can be effectively evaluated in a formal probabilistic/reliability framework.

Hemithoracic intensity modulated radiation therapy after pleurectomy/decortication for malignant pleural mesothelioma: toxicity, patterns of failure, and a matched survival analysis.

PubMed

Chance, William W; Rice, David C; Allen, Pamela K; Tsao, Anne S; Fontanilla, Hiral P; Liao, Zhongxing; Chang, Joe Y; Tang, Chad; Pan, Hubert Y; Welsh, James W; Mehran, Reza J; Gomez, Daniel R

2015-01-01

To investigate safety, efficacy, and recurrence after hemithoracic intensity modulated radiation therapy after pleurectomy/decortication (PD-IMRT) and after extrapleural pneumonectomy (EPP-IMRT). In 2009-2013, 24 patients with mesothelioma underwent PD-IMRT to the involved hemithorax to a dose of 45 Gy, with an optional integrated boost; 22 also received chemotherapy. Toxicity was scored with the Common Terminology Criteria for Adverse Events v4.0. Pulmonary function was compared at baseline, after surgery, and after IMRT. Kaplan-Meier analysis was used to calculate overall survival (OS), progression-free survival (PFS), time to locoregional failure, and time to distant metastasis. Failures were in-field, marginal, or out of field. Outcomes were compared with those of 24 patients, matched for age, nodal status, performance status, and chemotherapy, who had received EPP-IMRT. Median follow-up time was 12.2 months. Grade 3 toxicity rates were 8% skin and 8% pulmonary. Pulmonary function declined from baseline to after surgery (by 21% for forced vital capacity, 16% for forced expiratory volume in 1 second, and 19% for lung diffusion of carbon monoxide [P for all = .01]) and declined still further after IMRT (by 31% for forced vital capacity [P=.02], 25% for forced expiratory volume in 1 second [P=.01], and 30% for lung diffusion of carbon monoxide [P=.01]). The OS and PFS rates were 76% and 67%, respectively, at 1 year and 56% and 34% at 2 years. Median OS (28.4 vs 14.2 months, P=.04) and median PFS (16.4 vs 8.2 months, P=.01) favored PD-IMRT versus EPP-IMRT. No differences were found in grade 4-5 toxicity (0 of 24 vs 3 of 24, P=.23), median time to locoregional failure (18.7 months vs not reached, P not calculable), or median time to distant metastasis (18.8 vs 11.8 months, P=.12). Hemithoracic intensity modulated radiation therapy after pleurectomy/decortication produced little high-grade toxicity but led to progressive declines in pulmonary function; OS and PFS were better in PD-IMRT compared with EPP-IMRT. Copyright © 2015 Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, Stacy; English, Shawn; Briggs, Timothy

Fiber-reinforced composite materials offer light-weight solutions to many structural challenges. In the development of high-performance composite structures, a thorough understanding is required of the composite materials themselves as well as methods for the analysis and failure prediction of the relevant composite structures. However, the mechanical properties required for the complete constitutive definition of a composite material can be difficult to determine through experimentation. Therefore, efficient methods are necessary that can be used to determine which properties are relevant to the analysis of a specific structure and to establish a structure's response to a material parameter that can only be definedmore » through estimation. The objectives of this paper deal with demonstrating the potential value of sensitivity and uncertainty quantification techniques during the failure analysis of loaded composite structures; and the proposed methods are applied to the simulation of the four-point flexural characterization of a carbon fiber composite material. Utilizing a recently implemented, phenomenological orthotropic material model that is capable of predicting progressive composite damage and failure, a sensitivity analysis is completed to establish which material parameters are truly relevant to a simulation's outcome. Then, a parameter study is completed to determine the effect of the relevant material properties' expected variations on the simulated four-point flexural behavior as well as to determine the value of an unknown material property. This process demonstrates the ability to formulate accurate predictions in the absence of a rigorous material characterization effort. Finally, the presented results indicate that a sensitivity analysis and parameter study can be used to streamline the material definition process as the described flexural characterization was used for model validation.« less

End-stage renal failure in type 2 diabetes: A medical catastrophe of worldwide dimensions.

PubMed

Ritz, E; Rychlík, I; Locatelli, F; Halimi, S

1999-11-01

The incidence of patients with end-stage renal failure and diabetes mellitus type 2 as a comorbid condition has increased progressively in the past decades, first in the United States and Japan, but subsequently in all countries with a western lifestyle. Although there are explanations for this increase, the major factor is presumably diminishing mortality from hypertension and cardiovascular causes, so that patients survive long enough to develop nephropathy and end-stage renal failure. This review summarizes the striking differences between countries against the background of a similar tendency of an increasing incidence in all countries. Survival on renal replacement therapy continues to be substantially worse for patients with type 2 diabetes. A major reason for this observation is that patients enter renal replacement programs with cardiovascular morbidity acquired in the preterminal phase of renal failure. It is argued that the challenge for the future will be better patient management in earlier phases of diabetic nephropathy to attenuate or prevent progression, as well as cardiovascular complications.

Chronic obstructive pulmonary disease and chronic heart failure: two muscle diseases?

PubMed

Troosters, Thierry; Gosselink, Rik; Decramer, Marc

2004-01-01

Chronic obstructive pulmonary disease and congestive heart failure are two increasingly prevalent chronic diseases. Although care for these patients often is provided by different clinical teams, both disease conditions have much in common. In recent decades, more knowledge about the systemic impact of both diseases has become available, highlighting remarkable similarities in terms of prognostic factors and disease management. Rehabilitation programs deal with the systemic consequences of both diseases. Although clinical research also is conducted by various researchers investigating chronic obstructive pulmonary disease and chronic heart failure, it is worthwhile to compare the progress in relation to these two diseases over recent decades. Such comparison, the purpose of the current review, may help clinicians and scientists to learn about progress made in different, yet related, fields. The current review focuses on the similarities observed in the clinical impact of muscle weakness, the mechanisms of muscle dysfunction, the strategies to improve muscle function, and the effects of exercise training on chronic obstructive pulmonary disease and chronic heart failure.

Biofeedback in the treatment of heart failure.

PubMed

McKee, Michael G; Moravec, Christine S

2010-07-01

Biofeedback training can be used to reduce activation of the sympathetic nervous system (SNS) and increase activation of the parasympathetic nervous system (PNS). It is well established that hyperactivation of the SNS contributes to disease progression in chronic heart failure. It has been postulated that underactivation of the PNS may also play a role in heart failure pathophysiology. In addition to autonomic imbalance, a chronic inflammatory process is now recognized as being involved in heart failure progression, and recent work has established that activation of the inflammatory process may be attenuated by vagal nerve stimulation. By interfering with both autonomic imbalance and the inflammatory process, biofeedback-assisted stress management may be an effective treatment for patients with heart failure by improving clinical status and quality of life. Recent studies have suggested that biofeedback and stress management have a positive impact in patients with chronic heart failure, and patients with higher perceived control over their disease have been shown to have better quality of life. Our ongoing study of biofeedback-assisted stress management in the treatment of end-stage heart failure will also examine biologic end points in treated patients at the time of heart transplant, in order to assess the effects of biofeedback training on the cellular and molecular components of the failing heart. We hypothesize that the effects of biofeedback training will extend to remodeling the failing human heart, in addition to improving quality of life.

Physiology of respiratory disturbances in muscular dystrophies

PubMed Central

Lo Mauro, Antonella

2016-01-01

Muscular dystrophy is a group of inherited myopathies characterised by progressive skeletal muscle wasting, including of the respiratory muscles. Respiratory failure, i.e. when the respiratory system fails in its gas exchange functions, is a common feature in muscular dystrophy, being the main cause of death, and it is a consequence of lung failure, pump failure or a combination of the two. The former is due to recurrent aspiration, the latter to progressive weakness of respiratory muscles and an increase in the load against which they must contract. In fact, both the resistive and elastic components of the work of breathing increase due to airway obstruction and chest wall and lung stiffening, respectively. The respiratory disturbances in muscular dystrophy are restrictive pulmonary function, hypoventilation, altered thoracoabdominal pattern, hypercapnia, dyspnoea, impaired regulation of breathing, inefficient cough and sleep disordered breathing. They can be present at different rates according to the type of muscular dystrophy and its progression, leading to different onset of each symptom, prognosis and degree of respiratory involvement. Key points A common feature of muscular dystrophy is respiratory failure, i.e. the inability of the respiratory system to provide proper oxygenation and carbon dioxide elimination. In the lung, respiratory failure is caused by recurrent aspiration, and leads to hypoxaemia and hypercarbia. Ventilatory failure in muscular dystrophy is caused by increased respiratory load and respiratory muscles weakness. Respiratory load increases in muscular dystrophy because scoliosis makes chest wall compliance decrease, atelectasis and fibrosis make lung compliance decrease, and airway obstruction makes airway resistance increase. The consequences of respiratory pump failure are restrictive pulmonary function, hypoventilation, altered thoracoabdominal pattern, hypercapnia, dyspnoea, impaired regulation of breathing, inefficient cough and sleep disordered breathing. Educational aims To understand the mechanisms leading to respiratory disturbances in patients with muscular dystrophy. To understand the impact of respiratory disturbances in patients with muscular dystrophy. To provide a brief description of the main forms of muscular dystrophy with their respiratory implications. PMID:28210319

Physiology of respiratory disturbances in muscular dystrophies.

PubMed

Lo Mauro, Antonella; Aliverti, Andrea

2016-12-01

Muscular dystrophy is a group of inherited myopathies characterised by progressive skeletal muscle wasting, including of the respiratory muscles. Respiratory failure, i.e . when the respiratory system fails in its gas exchange functions, is a common feature in muscular dystrophy, being the main cause of death, and it is a consequence of lung failure, pump failure or a combination of the two. The former is due to recurrent aspiration, the latter to progressive weakness of respiratory muscles and an increase in the load against which they must contract. In fact, both the resistive and elastic components of the work of breathing increase due to airway obstruction and chest wall and lung stiffening, respectively. The respiratory disturbances in muscular dystrophy are restrictive pulmonary function, hypoventilation, altered thoracoabdominal pattern, hypercapnia, dyspnoea, impaired regulation of breathing, inefficient cough and sleep disordered breathing. They can be present at different rates according to the type of muscular dystrophy and its progression, leading to different onset of each symptom, prognosis and degree of respiratory involvement. A common feature of muscular dystrophy is respiratory failure, i.e. the inability of the respiratory system to provide proper oxygenation and carbon dioxide elimination.In the lung, respiratory failure is caused by recurrent aspiration, and leads to hypoxaemia and hypercarbia.Ventilatory failure in muscular dystrophy is caused by increased respiratory load and respiratory muscles weakness.Respiratory load increases in muscular dystrophy because scoliosis makes chest wall compliance decrease, atelectasis and fibrosis make lung compliance decrease, and airway obstruction makes airway resistance increase.The consequences of respiratory pump failure are restrictive pulmonary function, hypoventilation, altered thoracoabdominal pattern, hypercapnia, dyspnoea, impaired regulation of breathing, inefficient cough and sleep disordered breathing. To understand the mechanisms leading to respiratory disturbances in patients with muscular dystrophy.To understand the impact of respiratory disturbances in patients with muscular dystrophy.To provide a brief description of the main forms of muscular dystrophy with their respiratory implications.

Alternative Splicing of NOX4 in the Failing Human Heart

PubMed Central

Varga, Zoltán V.; Pipicz, Márton; Baán, Júlia A.; Baranyai, Tamás; Koncsos, Gábor; Leszek, Przemyslaw; Kuśmierczyk, Mariusz; Sánchez-Cabo, Fátima; García-Pavía, Pablo; Brenner, Gábor J.; Giricz, Zoltán; Csont, Tamás; Mendler, Luca; Lara-Pezzi, Enrique; Pacher, Pál; Ferdinandy, Péter

2017-01-01

Increased oxidative stress is a major contributor to the development and progression of heart failure, however, our knowledge on the role of the distinct NADPH oxidase (NOX) isoenzymes, especially on NOX4 is controversial. Therefore, we aimed to characterize NOX4 expression in human samples from healthy and failing hearts. Explanted human heart samples (left and right ventricular, and septal regions) were obtained from patients suffering from heart failure of ischemic or dilated origin. Control samples were obtained from donor hearts that were not used for transplantation. Deep RNA sequencing of the cardiac transcriptome indicated extensive alternative splicing of the NOX4 gene in heart failure as compared to samples from healthy donor hearts. Long distance PCR analysis with a universal 5′-3′ end primer pair, allowing amplification of different splice variants, confirmed the presence of the splice variants. To assess translation of the alternatively spliced transcripts we determined protein expression of NOX4 by using a specific antibody recognizing a conserved region in all variants. Western blot analysis showed up-regulation of the full-length NOX4 in ischemic cardiomyopathy samples and confirmed presence of shorter isoforms both in control and failing samples with disease-associated expression pattern. We describe here for the first time that NOX4 undergoes extensive alternative splicing in human hearts which gives rise to the expression of different enzyme isoforms. The full length NOX4 is significantly upregulated in ischemic cardiomyopathy suggesting a role for NOX4 in ROS production during heart failure. PMID:29204124

Recent developments of the NESSUS probabilistic structural analysis computer program

NASA Technical Reports Server (NTRS)

Millwater, H.; Wu, Y.-T.; Torng, T.; Thacker, B.; Riha, D.; Leung, C. P.

1992-01-01

The NESSUS probabilistic structural analysis computer program combines state-of-the-art probabilistic algorithms with general purpose structural analysis methods to compute the probabilistic response and the reliability of engineering structures. Uncertainty in loading, material properties, geometry, boundary conditions and initial conditions can be simulated. The structural analysis methods include nonlinear finite element and boundary element methods. Several probabilistic algorithms are available such as the advanced mean value method and the adaptive importance sampling method. The scope of the code has recently been expanded to include probabilistic life and fatigue prediction of structures in terms of component and system reliability and risk analysis of structures considering cost of failure. The code is currently being extended to structural reliability considering progressive crack propagation. Several examples are presented to demonstrate the new capabilities.

Geotechnical Characteristics and Stability Analysis of Rock-Soil Aggregate Slope at the Gushui Hydropower Station, Southwest China

PubMed Central

Shi, Chong; Xu, Fu-gang

2013-01-01

Two important features of the high slopes at Gushui Hydropower Station are layered accumulations (rock-soil aggregate) and multilevel toppling failures of plate rock masses; the Gendakan slope is selected for case study in this paper. Geological processes of the layered accumulation of rock and soil particles are carried out by the movement of water flow; the main reasons for the toppling failure of plate rock masses are the increasing weight of the upper rock-soil aggregate and mountain erosion by river water. Indoor triaxial compression test results show that, the cohesion and friction angle of the rock-soil aggregate decreased with the increasing water content; the cohesion and the friction angle for natural rock-soil aggregate are 57.7 kPa and 31.3° and 26.1 kPa and 29.1° for saturated rock-soil aggregate, respectively. The deformation and failure mechanism of the rock-soil aggregate slope is a progressive process, and local landslides will occur step by step. Three-dimensional limit equilibrium analysis results show that the minimum safety factor of Gendakan slope is 0.953 when the rock-soil aggregate is saturated, and small scale of landslide will happen at the lower slope. PMID:24082854

Geotechnical characteristics and stability analysis of rock-soil aggregate slope at the Gushui Hydropower Station, southwest China.

PubMed

Zhou, Jia-wen; Shi, Chong; Xu, Fu-gang

2013-01-01

Two important features of the high slopes at Gushui Hydropower Station are layered accumulations (rock-soil aggregate) and multilevel toppling failures of plate rock masses; the Gendakan slope is selected for case study in this paper. Geological processes of the layered accumulation of rock and soil particles are carried out by the movement of water flow; the main reasons for the toppling failure of plate rock masses are the increasing weight of the upper rock-soil aggregate and mountain erosion by river water. Indoor triaxial compression test results show that, the cohesion and friction angle of the rock-soil aggregate decreased with the increasing water content; the cohesion and the friction angle for natural rock-soil aggregate are 57.7 kPa and 31.3° and 26.1 kPa and 29.1° for saturated rock-soil aggregate, respectively. The deformation and failure mechanism of the rock-soil aggregate slope is a progressive process, and local landslides will occur step by step. Three-dimensional limit equilibrium analysis results show that the minimum safety factor of Gendakan slope is 0.953 when the rock-soil aggregate is saturated, and small scale of landslide will happen at the lower slope.

Bricklayer Static Analysis

NASA Astrophysics Data System (ADS)

Harris, Christopher

In the U.S., science and math are taking spotlight in education, and rightfully so as they directly impact economic progression. Curiously absent is computer science, which despite its numerous job opportunities and growth does not have as much focus. This thesis develops a source code analysis framework using language translation, and machine learning classifiers to analyze programs written in Bricklayer for the purposes of programmatically identifying relative success or failure of a students Bricklayer program, helping teachers scale in the amount of students they can support, and providing better messaging. The thesis uses as a case study a set of student programs to demonstrate the possibilities of the framework.

Numerical Implementation of a Multiple-ISV Thermodynamically-Based Work Potential Theory for Modeling Progressive Damage and Failure in Fiber-Reinforced Laminates

NASA Technical Reports Server (NTRS)

Pineda, Evan J.; Waas, Anthony M.

2011-01-01

A thermodynamically-based work potential theory for modeling progressive damage and failure in fiber-reinforced laminates is presented. The current, multiple-internal state variable (ISV) formulation, enhanced Schapery theory (EST), utilizes separate ISVs for modeling the effects of damage and failure. Damage is considered to be the effect of any structural changes in a material that manifest as pre-peak non-linearity in the stress versus strain response. Conversely, failure is taken to be the effect of the evolution of any mechanisms that results in post-peak strain softening. It is assumed that matrix microdamage is the dominant damage mechanism in continuous fiber-reinforced polymer matrix laminates, and its evolution is controlled with a single ISV. Three additional ISVs are introduced to account for failure due to mode I transverse cracking, mode II transverse cracking, and mode I axial failure. Typically, failure evolution (i.e., post-peak strain softening) results in pathologically mesh dependent solutions within a finite element method (FEM) setting. Therefore, consistent character element lengths are introduced into the formulation of the evolution of the three failure ISVs. Using the stationarity of the total work potential with respect to each ISV, a set of thermodynamically consistent evolution equations for the ISVs is derived. The theory is implemented into commercial FEM software. Objectivity of total energy dissipated during the failure process, with regards to refinements in the FEM mesh, is demonstrated. The model is also verified against experimental results from two laminated, T800/3900-2 panels containing a central notch and different fiber-orientation stacking sequences. Global load versus displacement, global load versus local strain gage data, and macroscopic failure paths obtained from the models are compared to the experiments.

A Thermodynamically-Based Mesh Objective Work Potential Theory for Predicting Intralaminar Progressive Damage and Failure in Fiber-Reinforced Laminates

NASA Technical Reports Server (NTRS)

Pineda, Evan J.; Waas, Anthony M.

2012-01-01

A thermodynamically-based work potential theory for modeling progressive damage and failure in fiber-reinforced laminates is presented. The current, multiple-internal state variable (ISV) formulation, enhanced Schapery theory (EST), utilizes separate ISVs for modeling the effects of damage and failure. Damage is considered to be the effect of any structural changes in a material that manifest as pre-peak non-linearity in the stress versus strain response. Conversely, failure is taken to be the effect of the evolution of any mechanisms that results in post-peak strain softening. It is assumed that matrix microdamage is the dominant damage mechanism in continuous fiber-reinforced polymer matrix laminates, and its evolution is controlled with a single ISV. Three additional ISVs are introduced to account for failure due to mode I transverse cracking, mode II transverse cracking, and mode I axial failure. Typically, failure evolution (i.e., post-peak strain softening) results in pathologically mesh dependent solutions within a finite element method (FEM) setting. Therefore, consistent character element lengths are introduced into the formulation of the evolution of the three failure ISVs. Using the stationarity of the total work potential with respect to each ISV, a set of thermodynamically consistent evolution equations for the ISVs is derived. The theory is implemented into commercial FEM software. Objectivity of total energy dissipated during the failure process, with regards to refinements in the FEM mesh, is demonstrated. The model is also verified against experimental results from two laminated, T800/3900-2 panels containing a central notch and different fiber-orientation stacking sequences. Global load versus displacement, global load versus local strain gage data, and macroscopic failure paths obtained from the models are compared to the experiments.

Progressive Fracture of Laminated Fiber-Reinforced Composite Stiffened Plate Under Pressure

NASA Technical Reports Server (NTRS)

Gotsis, Pascalis K.; Abdi, Frank; Chamis, Christos C.; Tsouros, Konstantinos

2007-01-01

S-Glass/epoxy laminated fiber-reinforced composite stiffened plate structure with laminate configuration (0/90)5 was simulated to investigate damage and fracture progression, under uniform pressure. For comparison reasons a simple plate was examined, in addition with the stiffened plate. An integrated computer code was used for the simulation. The damage initiation began with matrix failure in tension, continuous with damage and/or fracture progression as a result of additional matrix failure and fiber fracture and followed by additional interply delamination. Fracture through the thickness began when the damage accumulation was 90%. After that stage, the cracks propagate rapidly and the structures collapse. The collapse load for the simple plate is 21.57 MPa (3120 psi) and for the stiffened plate 25.24 MPa (3660 psi).

Age and Stress Prediction

NASA Technical Reports Server (NTRS)

2000-01-01

Genoa is a software product that predicts progressive aging and failure in a variety of materials. It is the result of a SBIR contract between the Glenn Research Center and Alpha Star Corporation. Genoa allows designers to determine if the materials they plan on applying to a structure are up to the task or if alternate materials should be considered. Genoa's two feature applications are its progressive failure simulations and its test verification. It allows for a reduction in inspection frequency, rapid design solutions, and manufacturing with low cost materials. It will benefit the aerospace, airline, and automotive industries, with future applications for other uses.

Can the Seattle heart failure model be used to risk-stratify heart failure patients for potential left ventricular assist device therapy?

PubMed

Levy, Wayne C; Mozaffarian, Dariush; Linker, David T; Farrar, David J; Miller, Leslie W

2009-03-01

According to results of the REMATCH trial, left ventricular assist device therapy in patients with severe heart failure has resulted in a 48% reduction in mortality. A decision tool will be necessary to aid in the selection of patients for destination left ventricular assist devices (LVADs) as the technology progresses for implantation in ambulatory Stage D heart failure patients. The purpose of this analysis was to determine whether the Seattle Heart Failure Model (SHFM) can be used to risk-stratify heart failure patients for potential LVAD therapy. The SHFM was applied to REMATCH patients with the prospective addition of inotropic agents and intra-aortic balloon pump (IABP) +/- ventilator. The SHFM was highly predictive of survival (p = 0.0004). One-year SHFM-predicted survival was similar to actual survival for both the REMATCH medical (30% vs 28%) and LVAD (49% vs 52%) groups. The estimated 1-year survival with medical therapy for patients in REMATCH was 30 +/- 21%, but with a range of 0% to 74%. The 1- and 2-year estimated survival was

Statistics-related and reliability-physics-related failure processes in electronics devices and products

NASA Astrophysics Data System (ADS)

Suhir, E.

2014-05-01

The well known and widely used experimental reliability "passport" of a mass manufactured electronic or a photonic product — the bathtub curve — reflects the combined contribution of the statistics-related and reliability-physics (physics-of-failure)-related processes. When time progresses, the first process results in a decreasing failure rate, while the second process associated with the material aging and degradation leads to an increased failure rate. An attempt has been made in this analysis to assess the level of the reliability physics-related aging process from the available bathtub curve (diagram). It is assumed that the products of interest underwent the burn-in testing and therefore the obtained bathtub curve does not contain the infant mortality portion. It has been also assumed that the two random processes in question are statistically independent, and that the failure rate of the physical process can be obtained by deducting the theoretically assessed statistical failure rate from the bathtub curve ordinates. In the carried out numerical example, the Raleigh distribution for the statistical failure rate was used, for the sake of a relatively simple illustration. The developed methodology can be used in reliability physics evaluations, when there is a need to better understand the roles of the statistics-related and reliability-physics-related irreversible random processes in reliability evaluations. The future work should include investigations on how powerful and flexible methods and approaches of the statistical mechanics can be effectively employed, in addition to reliability physics techniques, to model the operational reliability of electronic and photonic products.

[Liver Atrophy and Failure Associated with Paclitaxel and Bevacizumab Combination Therapy for Metastatic Breast Cancer].

PubMed

Yamamoto, Mari; Ikeda, Masahiko; Kubo, Shinichiro; Tsukioki, Takahiro; Nakamoto, Shougo

2016-07-01

We managed 6 cases of severe liver atrophy and failure associated with paclitaxel and bevacizumab combination therapy (PB therapy)for HER2-negative metastatic breast cancer. In this case-controlstudy, we examined the records of these 6 patients to investigate past treatment, medication history, and degree of atrophy, and compared their data with that of 67 patients without liver atrophy. The degree of the liver atrophy used SYNAPSE VINCENT®of the image analysis software. The results showed that patients with liver atrophy had a longer pretreatment period than those without liver atrophy(33.5 months vs 15.5 months), and they also experienced a longer median time to treatment failure with PB therapy than other patients(11 months vs 6 months). The ratio of individuals presenting with diffuse liver metastasis among patients with liver metastasis was 80% with liver atrophy, compared to 8% without liver atrophy. The degree of liver atrophy was an average of 67%in terms of volume ratio before/after PB therapy(57-82%). The individualwith the greatest extent of liver atrophy died of liver failure, not as a result of breast cancer progression. The direct causal link between bevacizumab and liver atrophy and failure is unclear, but the individuals in this study had a long previous history of treatment, and diffuse liver metastases may develop in patients undergoing long periods of PB therapy, which may also cause liver atrophy; therefore, the possibility of liver failure should be considered in such cases.

Progressive failure during the 1596 Keicho earthquakes on the Median Tectonic Line active fault zone, southwest Japan

NASA Astrophysics Data System (ADS)

Ikeda, M.; Toda, S.; Nishizaka, N.; Onishi, K.; Suzuki, S.

2015-12-01

Rupture patterns of a long fault system are controlled by spatial heterogeneity of fault strength and stress associated with geometrical characteristics and stress perturbation history. Mechanical process for sequential ruptures and multiple simultaneous ruptures, one of the characteristics of a long fault such as the North Anatolian fault, governs the size and frequency of large earthquakes. Here we introduce one of the cases in southwest Japan and explore what controls rupture initiation, sequential ruptures and fault branching on a long fault system. The Median Tectonic Line active fault zone　(hereinafter MTL) is the longest and most active fault in Japan. Based on historical accounts, a series of M ≥ 7 earthquakes occurred on at least a 300-km-long portion of the MTL in 1596. On September 1, the first event occurred on the Kawakami fault segment, in Central Shikoku, and the subsequent events occurred further west. Then on September 5, another rupture initiated from the Central to East Shikoku and then propagated toward the Rokko-Awaji fault zone to Kobe, a northern branch of the MTL, instead of the eastern main extent of the MTL. Another rupture eventually extended to near Kyoto. To reproduce this progressive failure, we applied two numerical models: one is a coulomb stress transfer; the other is a slip-tendency analysis under the tectonic stress. We found that Coulomb stress imparted from historical ruptures have triggered the subsequent ruptures nearby. However, stress transfer does not explain beginning of the sequence and rupture directivities. Instead, calculated slip-tendency values show highly variable along the MTL: high and low seismic potential in West and East Shikoku. The initiation point of the 1596 progressive failure locates near the boundary in the slip-tendency values. Furthermore, the slip-tendency on the Rokko-Awaji fault zone is far higher than that of the MTL in Wakayama, which may explain the rupture directivity toward Kobe-Kyoto.

Analysis of GMO Plum Plant Culture in System Operations Failure

NASA Technical Reports Server (NTRS)

Mercado, Dianne

2017-01-01

GMO plum trees are being evaluated at the Kennedy Space Center as a possible candidate for future space crops. Previously conducted horticultural testing compared the performance of several plum genotypes in controlled environment chambers, resulting in a down-selection to the NASA-11 genotype. Precursory studies determined the water use requirements to sustain the plants as well as the feasibility of grafting non-GMO plum scions onto GMO plum rootstocks of NASA-5, NASA-10, and NASA-11 genotypes. This study follows the growth and horticultural progress of plum trees and in-vitro cultures from August 2017 to November 2017, and provides supplemental support for future GMO plum studies. The presence of Hurricane Irma in early September 2017 resulted in the plants undergoing material deterioration from major changes to their overall horticultural progress.

Human Papillomavirus and Overall Survival After Progression of Oropharyngeal Squamous Cell Carcinoma

PubMed Central

Fakhry, Carole; Zhang, Qiang; Nguyen-Tan, Phuc Felix; Rosenthal, David; El-Naggar, Adel; Garden, Adam S.; Soulieres, Denis; Trotti, Andy; Avizonis, Vilija; Ridge, John Andrew; Harris, Jonathan; Le, Quynh-Thu; Gillison, Maura

2014-01-01

Purpose Risk of cancer progression is reduced for patients with human papillomavirus (HPV) –positive oropharynx cancer (OPC) relative to HPV-negative OPC, but it is unknown whether risk of death after progression is similarly reduced. Patients and Methods Patients with stage III-IV OPC enrolled onto Radiation Therapy Oncology Group trials 0129 or RTOG 0522 who had known tumor p16 status plus local, regional, and/or distant progression after receiving platinum-based chemoradiotherapy were eligible for a retrospective analysis of the association between tumor p16 status and overall survival (OS) after disease progression. Rates were estimated by Kaplan-Meier method and compared by log-rank; hazard ratios (HRs) were estimated by Cox models. Tests and models were stratified by treatment protocol. Results A total of 181 patients with p16-positive (n = 105) or p16-negative (n = 76) OPC were included in the analysis. Patterns of failure and median time to progression (8.2 v 7.3 months; P = .67) were similar for patients with p16-positive and p16-negative tumors. After a median follow-up period of 4.0 years after disease progression, patients with p16-positive OPC had significantly improved survival rates compared with p16-negative patients (2-year OS, 54.6% v 27.6%; median, 2.6 v 0.8 years; P < .001). p16-positive tumor status (HR, 0.48; 95% CI, 0.31 to 0.74) and receipt of salvage surgery (HR, 0.48; 95% CI; 0.27 to 0.84) reduced risk of death after disease progression whereas distant versus locoregional progression (HR, 1.99; 95% CI, 1.28 to 3.09) increased risk, after adjustment for tumor stage and cigarette pack-years at enrollment. Conclusion Tumor HPV status is a strong and independent predictor of OS after disease progression and should be a stratification factor for clinical trials for patients with recurrent or metastatic OPC. PMID:24958820

Combined In-Plane and Through-the-Thickness Analysis for Failure Prediction of Bolted Composite Joints

NASA Technical Reports Server (NTRS)

Kradinov, V.; Madenci, E.; Ambur, D. R.

2004-01-01

Although two-dimensional methods provide accurate predictions of contact stresses and bolt load distribution in bolted composite joints with multiple bolts, they fail to capture the effect of thickness on the strength prediction. Typically, the plies close to the interface of laminates are expected to be the most highly loaded, due to bolt deformation, and they are usually the first to fail. This study presents an analysis method to account for the variation of stresses in the thickness direction by augmenting a two-dimensional analysis with a one-dimensional through the thickness analysis. The two-dimensional in-plane solution method based on the combined complex potential and variational formulation satisfies the equilibrium equations exactly, and satisfies the boundary conditions and constraints by minimizing the total potential. Under general loading conditions, this method addresses multiple bolt configurations without requiring symmetry conditions while accounting for the contact phenomenon and the interaction among the bolts explicitly. The through-the-thickness analysis is based on the model utilizing a beam on an elastic foundation. The bolt, represented as a short beam while accounting for bending and shear deformations, rests on springs, where the spring coefficients represent the resistance of the composite laminate to bolt deformation. The combined in-plane and through-the-thickness analysis produces the bolt/hole displacement in the thickness direction, as well as the stress state in each ply. The initial ply failure predicted by applying the average stress criterion is followed by a simple progressive failure. Application of the model is demonstrated by considering single- and double-lap joints of metal plates bolted to composite laminates.

Propylthiouracil-Induced Acute Liver Failure: Role of Liver Transplantation

PubMed Central

Carrion, Andres F.; Czul, Frank; Arosemena, Leopoldo R.; Selvaggi, Gennaro; Garcia, Monica T.; Tekin, Akin; Tzakis, Andreas G.; Martin, Paul; Ghanta, Ravi K.

2010-01-01

Propylthiouracil- (PTU-) induced hepatotoxicity is rare but potentially lethal with a spectrum of liver injury ranging from asymptomatic elevation of transaminases to fulminant hepatic failure and death. We describe two cases of acute hepatic failure due to PTU that required liver transplantation. Differences in the clinical presentation, histological characteristics, and posttransplant management are described as well as alternative therapeutic options. Frequent monitoring for PTU-induced hepatic dysfunction is strongly advised because timely discontinuation of this drug and implementation of noninvasive therapeutic interventions may prevent progression to liver failure or even death. PMID:21234410

A framework for analysis of sentinel events in medical student education.

PubMed

Cohen, Daniel M; Clinchot, Daniel M; Werman, Howard A

2013-11-01

Although previous studies have addressed student factors contributing to dismissal or withdrawal from medical school for academic reasons, little information is available regarding institutional factors that may hinder student progress. The authors describe the development and application of a framework for sentinel event (SE) root cause analysis to evaluate cases in which students are dismissed or withdraw because of failure to progress in the medical school curriculum. The SE in medical student education (MSE) framework was piloted at the Ohio State University College of Medicine (OSUCOM) during 2010-2012. Faculty presented cases using the framework during academic oversight committee discussions. Nine SEs in MSE were presented using the framework. Major institution-level findings included the need for improved communication, documentation of cognitive and noncognitive (e.g., mental health) issues, clarification of requirements for remediation and fitness for duty, and additional psychological services. Challenges related to alternative and combined programs were identified as well. The OSUCOM undertook system changes based on the action plans developed through the discussions of these SEs. An SE analysis process appears to be a useful method for making system changes in response to institutional issues identified in evaluation of cases in which students fail to progress in the medical school curriculum. The authors plan to continue to refine the SE in MSE framework and analysis process. Next steps include assessing whether analysis using this framework yields improved student outcomes with universal applications for other institutions.

Autologous Transplantation in Follicular Lymphoma with Early Therapy Failure: A National LymphoCare Study and Center for International Blood and Marrow Transplant Research Analysis.

PubMed

Casulo, Carla; Friedberg, Jonathan W; Ahn, Kwang W; Flowers, Christopher; DiGilio, Alyssa; Smith, Sonali M; Ahmed, Sairah; Inwards, David; Aljurf, Mahmoud; Chen, Andy I; Choe, Hannah; Cohen, Jonathon; Copelan, Edward; Farooq, Umar; Fenske, Timothy S; Freytes, Cesar; Gaballa, Sameh; Ganguly, Siddhartha; Jethava, Yogesh; Kamble, Rammurti T; Kenkre, Vaishalee P; Lazarus, Hillard; Lazaryan, Aleksandr; Olsson, Richard F; Rezvani, Andrew R; Rizzieri, David; Seo, Sachiko; Shah, Gunjan L; Shah, Nina; Solh, Melham; Sureda, Anna; William, Basem; Cumpston, Aaron; Zelenetz, Andrew D; Link, Brian K; Hamadani, Mehdi

2018-06-01

Patients with follicular lymphoma (FL) experiencing early therapy failure (ETF) within 2 years of frontline chemoimmunotherapy have poor overall survival (OS). We analyzed data from the Center for International Blood and Marrow Transplant Research (CIBMTR) and the National LymphoCare Study (NLCS) to determine whether autologous hematopoietic cell transplant (autoHCT) can improve outcomes in this high-risk FL subgroup. ETF was defined as failure to achieve at least partial response after frontline chemoimmunotherapy or lymphoma progression within 2 years of frontline chemoimmunotherapy. We identified 2 groups: the non-autoHCT cohort (patients from the NLCS with ETF not undergoing autoHCT) and the autoHCT cohort (CIBMTR patients with ETF undergoing autoHCT). All patients received rituximab-based chemotherapy as frontline treatment; 174 non-autoHCT patients and 175 autoHCT patients were identified and analyzed. There was no difference in 5-year OS between the 2 groups (60% versus 67%, respectively; P = .16). A planned subgroup analysis showed that patients with ETF receiving autoHCT soon after treatment failure (≤1 year of ETF; n = 123) had higher 5-year OS than those without autoHCT (73% versus 60%, P = .05). On multivariate analysis, early use of autoHCT was associated with significantly reduced mortality (hazard ratio, .63; 95% confidence interval, .42 to .94; P = .02). Patients with FL experiencing ETF after frontline chemoimmunotherapy lack optimal therapy. We demonstrate improved OS when receiving autoHCT within 1 year of treatment failure. Results from this unique collaboration between the NLCS and CIBMTR support consideration of early consolidation with autoHCT in select FL patients experiencing ETF. Copyright © 2017 The American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.

Metabolic enzymes dysregulation in heart failure: the prospective therapy.

PubMed

Parihar, Priyanka; Parihar, Mordhwaj Singh

2017-01-01

The heart failure accounts for the highest mortality rate all over the world. The development of preventive therapeutic approaches is still in their infancy. Owing to the extremely high energy demand of the heart, the bioenergetics pathways need to respond efficiently based on substrate availability. The metabolic regulation of such heart bioenergetics is mediated by various rate limiting enzymes involved in energy metabolism. Although all the pertinent mechanisms are not clearly understood, the progressive decline in the activity of metabolic enzymes leading to diminished ATP production is known to cause progression of the heart failure. Therefore, metabolic therapy that can maintain the appropriate activities of metabolic enzymes can be a promising approach for the prevention and treatment of the heart failure. The flavonoids that constitute various human dietary ingredients also effectively offer a variety of health benefits. The flavonoids target a variety of metabolic enzymes and facilitate effective management of the equilibrium between production and utilization of energy in the heart. This review discusses the broad impact of metabolic enzymes in the heart functions and explains how the dysregulated enzyme activity causes the heart failure. In addition, the prospects of targeting dysregulated metabolic enzymes by developing flavonoid-based metabolic approaches are discussed.

Impaired left ventricular systolic function and increased brachial-ankle pulse-wave velocity are independently associated with rapid renal function progression.

PubMed

Chen, Szu-Chia; Lin, Tsung-Hsien; Hsu, Po-Chao; Chang, Jer-Ming; Lee, Chee-Siong; Tsai, Wei-Chung; Su, Ho-Ming; Voon, Wen-Chol; Chen, Hung-Chun

2011-09-01

Heart failure and increased arterial stiffness are associated with declining renal function. Few studies have evaluated the association between left ventricular ejection fraction (LVEF) and brachial-ankle pulse-wave velocity (baPWV) and renal function progression. The aim of this study was to assess whether LVEF<40% and baPWV are associated with a decline in the estimated glomerular filtration rate (eGFR) and the progression to a renal end point of ≥25% decline in eGFR. This longitudinal study included 167 patients. The baPWV was measured with an ankle-brachial index-form device. The change in renal function was estimated by eGFR slope. The renal end point was defined as ≥25% decline in eGFR. Clinical and echocardiographic parameters were compared and analyzed. After a multivariate analysis, serum hematocrit was positively associated with eGFR slope, and diabetes mellitus, baPWV (P=0.031) and LVEF<40% (P=0.001) were negatively associated with eGFR slope. Forty patients reached the renal end point. Multivariate, forward Cox regression analysis found that lower serum albumin and hematocrit levels, higher triglyceride levels, higher baPWV (P=0.039) and LVEF<40% (P<0.001) were independently associated with progression to the renal end point. Our results show that LVEF<40% and increased baPWV are independently associated with renal function decline and progression to the renal end point.

Multidisciplinary System Reliability Analysis

NASA Technical Reports Server (NTRS)

Mahadevan, Sankaran; Han, Song; Chamis, Christos C. (Technical Monitor)

2001-01-01

The objective of this study is to develop a new methodology for estimating the reliability of engineering systems that encompass multiple disciplines. The methodology is formulated in the context of the NESSUS probabilistic structural analysis code, developed under the leadership of NASA Glenn Research Center. The NESSUS code has been successfully applied to the reliability estimation of a variety of structural engineering systems. This study examines whether the features of NESSUS could be used to investigate the reliability of systems in other disciplines such as heat transfer, fluid mechanics, electrical circuits etc., without considerable programming effort specific to each discipline. In this study, the mechanical equivalence between system behavior models in different disciplines are investigated to achieve this objective. A new methodology is presented for the analysis of heat transfer, fluid flow, and electrical circuit problems using the structural analysis routines within NESSUS, by utilizing the equivalence between the computational quantities in different disciplines. This technique is integrated with the fast probability integration and system reliability techniques within the NESSUS code, to successfully compute the system reliability of multidisciplinary systems. Traditional as well as progressive failure analysis methods for system reliability estimation are demonstrated, through a numerical example of a heat exchanger system involving failure modes in structural, heat transfer and fluid flow disciplines.

Multi-Disciplinary System Reliability Analysis

NASA Technical Reports Server (NTRS)

Mahadevan, Sankaran; Han, Song

1997-01-01

The objective of this study is to develop a new methodology for estimating the reliability of engineering systems that encompass multiple disciplines. The methodology is formulated in the context of the NESSUS probabilistic structural analysis code developed under the leadership of NASA Lewis Research Center. The NESSUS code has been successfully applied to the reliability estimation of a variety of structural engineering systems. This study examines whether the features of NESSUS could be used to investigate the reliability of systems in other disciplines such as heat transfer, fluid mechanics, electrical circuits etc., without considerable programming effort specific to each discipline. In this study, the mechanical equivalence between system behavior models in different disciplines are investigated to achieve this objective. A new methodology is presented for the analysis of heat transfer, fluid flow, and electrical circuit problems using the structural analysis routines within NESSUS, by utilizing the equivalence between the computational quantities in different disciplines. This technique is integrated with the fast probability integration and system reliability techniques within the NESSUS code, to successfully compute the system reliability of multi-disciplinary systems. Traditional as well as progressive failure analysis methods for system reliability estimation are demonstrated, through a numerical example of a heat exchanger system involving failure modes in structural, heat transfer and fluid flow disciplines.

25 CFR 30.123 - What is the Bureau's role in assisting Bureau-funded schools to make AYP?

Code of Federal Regulations, 2010 CFR

2010-04-01

... EDUCATION ADEQUATE YEARLY PROGRESS Failure To Make Adequate Yearly Progress § 30.123 What is the Bureau's...-funded schools to assist them in achieving AYP. This includes technical assistance and other forms of...

25 CFR 30.123 - What is the Bureau's role in assisting Bureau-funded schools to make AYP?

Code of Federal Regulations, 2011 CFR

2011-04-01

... EDUCATION ADEQUATE YEARLY PROGRESS Failure To Make Adequate Yearly Progress § 30.123 What is the Bureau's...-funded schools to assist them in achieving AYP. This includes technical assistance and other forms of...

29 CFR 29.8 - Deregistration of a registered program.

Code of Federal Regulations, 2012 CFR

2012-07-01

... at the sponsor's request, and the effective date thereof; (2) That, within 15 days of the date of the acknowledgment, the sponsor will notify all apprentices of such cancellation and the effective date; that such... learning; failure to provide related instruction; failure to pay the apprentice a progressively increasing...

29 CFR 29.8 - Deregistration of a registered program.

Code of Federal Regulations, 2014 CFR

2014-07-01

... at the sponsor's request, and the effective date thereof; (2) That, within 15 days of the date of the acknowledgment, the sponsor will notify all apprentices of such cancellation and the effective date; that such... learning; failure to provide related instruction; failure to pay the apprentice a progressively increasing...

29 CFR 29.8 - Deregistration of a registered program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... at the sponsor's request, and the effective date thereof; (2) That, within 15 days of the date of the acknowledgment, the sponsor will notify all apprentices of such cancellation and the effective date; that such... learning; failure to provide related instruction; failure to pay the apprentice a progressively increasing...

29 CFR 29.8 - Deregistration of a registered program.

Code of Federal Regulations, 2013 CFR

2013-07-01

... at the sponsor's request, and the effective date thereof; (2) That, within 15 days of the date of the acknowledgment, the sponsor will notify all apprentices of such cancellation and the effective date; that such... learning; failure to provide related instruction; failure to pay the apprentice a progressively increasing...

Development of a parallel FE simulator for modeling the whole trans-scale failure process of rock from meso- to engineering-scale

NASA Astrophysics Data System (ADS)

Li, Gen; Tang, Chun-An; Liang, Zheng-Zhao

2017-01-01

Multi-scale high-resolution modeling of rock failure process is a powerful means in modern rock mechanics studies to reveal the complex failure mechanism and to evaluate engineering risks. However, multi-scale continuous modeling of rock, from deformation, damage to failure, has raised high requirements on the design, implementation scheme and computation capacity of the numerical software system. This study is aimed at developing the parallel finite element procedure, a parallel rock failure process analysis (RFPA) simulator that is capable of modeling the whole trans-scale failure process of rock. Based on the statistical meso-damage mechanical method, the RFPA simulator is able to construct heterogeneous rock models with multiple mechanical properties, deal with and represent the trans-scale propagation of cracks, in which the stress and strain fields are solved for the damage evolution analysis of representative volume element by the parallel finite element method (FEM) solver. This paper describes the theoretical basis of the approach and provides the details of the parallel implementation on a Windows - Linux interactive platform. A numerical model is built to test the parallel performance of FEM solver. Numerical simulations are then carried out on a laboratory-scale uniaxial compression test, and field-scale net fracture spacing and engineering-scale rock slope examples, respectively. The simulation results indicate that relatively high speedup and computation efficiency can be achieved by the parallel FEM solver with a reasonable boot process. In laboratory-scale simulation, the well-known physical phenomena, such as the macroscopic fracture pattern and stress-strain responses, can be reproduced. In field-scale simulation, the formation process of net fracture spacing from initiation, propagation to saturation can be revealed completely. In engineering-scale simulation, the whole progressive failure process of the rock slope can be well modeled. It is shown that the parallel FE simulator developed in this study is an efficient tool for modeling the whole trans-scale failure process of rock from meso- to engineering-scale.

Stereotactic Radiosurgery for the Treatment of Primary and Metastatic Spinal Sarcomas

PubMed Central

Balagamwala, Ehsan H.; Angelov, Lilyana; Suh, John H.; Djemil, Toufik; Magnelli, Anthony; Qi, Peng; Zhuang, Tingliang; Godley, Andrew

2016-01-01

Purpose: Despite advancements in local and systemic therapy, metastasis remains common in the natural history of sarcomas. Unfortunately, such metastases are the most significant source of morbidity and mortality in this heterogeneous disease. As a classically radioresistant histology, stereotactic radiosurgery has emerged to control spinal sarcomas and provide palliation. However, there is a lack of data regarding pain relief and relapse following stereotactic radiosurgery. Methods: We queried a retrospective institutional database of patients who underwent spine stereotactic radiosurgery for primary and metastatic sarcomas. The primary outcome was pain relief following stereotactic radiosurgery. Secondary outcomes included progression of pain, radiographic failure, and development of toxicities following treatment. Results: Forty treatment sites were eligible for inclusion; the median prescription dose was 16 Gy in a single fraction. Median time to radiographic failure was 14 months. At 6 and 12 months, radiographic control was 63% and 51%, respectively. Among patients presenting with pain, median time to pain relief was 1 month. Actuarial pain relief at 6 months was 82%. Median time to pain progression was 10 months; at 12 months, actuarial pain progression was 51%. Following multivariate analysis, presence of neurologic deficit at consult (hazard ratio: 2.48, P < .01) and presence of extraspinal bone metastases (hazard ratio: 2.83, P < .01) were associated with pain relief. Greater pain at consult (hazard ratio: 1.92, P < .01), prior radiotherapy (hazard ratio: 4.65, P = .02), and greater number of irradiated vertebral levels were associated with pain progression. Conclusions: Local treatment of spinal sarcomas has remained a challenge for decades, with poor rates of local control and limited pain relief following conventional radiotherapy. In this series, pain relief was achieved in 82% of treatments at 6 months, with half of patients experiencing pain progression by 12 months. Given minimal toxicity and suboptimal pain control at 12 months, dose escalation beyond 16 Gy is warranted. PMID:27074915

Impact Damage and Strain Rate Effects for Toughened Epoxy Composite Structures

NASA Technical Reports Server (NTRS)

Chamis, Christos C.; Minnetyan, Levon

2006-01-01

Structural integrity of composite systems under dynamic impact loading is investigated herein. The GENOA virtual testing software environment is used to implement the effects of dynamic loading on fracture progression and damage tolerance. Combinations of graphite and glass fibers with a toughened epoxy matrix are investigated. The effect of a ceramic coating for the absorption of impact energy is also included. Impact and post impact simulations include verification and prediction of (1) Load and Impact Energy, (2) Impact Damage Size, (3) Maximum Impact Peak Load, (4) Residual Strength, (5) Maximum Displacement, (6) Contribution of Failure Modes to Failure Mechanisms, (7) Prediction of Impact Load Versus Time, and (8) Damage, and Fracture Pattern. A computer model is utilized for the assessment of structural response, progressive fracture, and defect/damage tolerance characteristics. Results show the damage progression sequence and the changes in the structural response characteristics due to dynamic impact. The fundamental premise of computational simulation is that the complete evaluation of composite fracture requires an assessment of ply and subply level damage/fracture processes as the structure is subjected to loads. Simulation results for the graphite/epoxy composite were compared with the impact and tension failure test data, correlation and verification was obtained that included: (1) impact energy, (2) damage size, (3) maximum impact peak load, (4) residual strength, (5) maximum displacement, and (6) failure mechanisms of the composite structure.

Mechanical Behavior of Steel Fiber-Reinforced Concrete Beams Bonded with External Carbon Fiber Sheets

PubMed Central

Gribniak, Viktor; Tamulenas, Vytautas; Ng, Pui-Lam; Arnautov, Aleksandr K.; Gudonis, Eugenijus; Misiunaite, Ieva

2017-01-01

This study investigates the mechanical behavior of steel fiber-reinforced concrete (SFRC) beams internally reinforced with steel bars and externally bonded with carbon fiber-reinforced polymer (CFRP) sheets fixed by adhesive and hybrid jointing techniques. In particular, attention is paid to the load resistance and failure modes of composite beams. The steel fibers were used to avoiding the rip-off failure of the concrete cover. The CFRP sheets were fixed to the concrete surface by epoxy adhesive as well as combined with various configurations of small-diameter steel pins for mechanical fastening to form a hybrid connection. Such hybrid jointing techniques were found to be particularly advantageous in avoiding brittle debonding failure, by promoting progressive failure within the hybrid joints. The use of CFRP sheets was also effective in suppressing the localization of the discrete cracks. The development of the crack pattern was monitored using the digital image correlation method. As revealed from the image analyses, with an appropriate layout of the steel pins, brittle failure of the concrete-carbon fiber interface could be effectively prevented. Inverse analysis of the moment-curvature diagrams was conducted, and it was found that a simplified tension-stiffening model with a constant residual stress level at 90% of the strength of the SFRC is adequate for numerically simulating the deformation behavior of beams up to the debonding of the CFRP sheets. PMID:28773024

Mechanical Behavior of Steel Fiber-Reinforced Concrete Beams Bonded with External Carbon Fiber Sheets.

PubMed

Gribniak, Viktor; Tamulenas, Vytautas; Ng, Pui-Lam; Arnautov, Aleksandr K; Gudonis, Eugenijus; Misiunaite, Ieva

2017-06-17

This study investigates the mechanical behavior of steel fiber-reinforced concrete (SFRC) beams internally reinforced with steel bars and externally bonded with carbon fiber-reinforced polymer (CFRP) sheets fixed by adhesive and hybrid jointing techniques. In particular, attention is paid to the load resistance and failure modes of composite beams. The steel fibers were used to avoiding the rip-off failure of the concrete cover. The CFRP sheets were fixed to the concrete surface by epoxy adhesive as well as combined with various configurations of small-diameter steel pins for mechanical fastening to form a hybrid connection. Such hybrid jointing techniques were found to be particularly advantageous in avoiding brittle debonding failure, by promoting progressive failure within the hybrid joints. The use of CFRP sheets was also effective in suppressing the localization of the discrete cracks. The development of the crack pattern was monitored using the digital image correlation method. As revealed from the image analyses, with an appropriate layout of the steel pins, brittle failure of the concrete-carbon fiber interface could be effectively prevented. Inverse analysis of the moment-curvature diagrams was conducted, and it was found that a simplified tension-stiffening model with a constant residual stress level at 90% of the strength of the SFRC is adequate for numerically simulating the deformation behavior of beams up to the debonding of the CFRP sheets.

The Impact of Preradiation Residual Disease Volume on Time to Locoregional Failure in Cutaneous Merkel Cell Carcinoma—A TROG Substudy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Finnigan, Renee; Hruby, George; Wratten, Chris

2013-05-01

Purpose: This study evaluated the impact of margin status and gross residual disease in patients treated with chemoradiation therapy for high-risk stage I and II Merkel cell cancer (MCC). Methods and Materials: Data were pooled from 3 prospective trials in which patients were treated with 50 Gy in 25 fractions to the primary lesion and draining lymph nodes and 2 schedules of carboplatin based chemotherapy. Time to locoregional failure was analyzed according to the burden of disease at the time of radiation therapy, comparing patients with negative margins, involved margins, or macroscopic disease. Results: Analysis was performed on 88 patients,more » of whom 9 had microscopically positive resection margins and 26 had macroscopic residual disease. The majority of gross disease was confined to nodal regions. The 5-year time to locoregional failure, time to distant failure, time to progression, and disease-specific survival rates for the whole group were 73%, 69%, 62%, and 66% respectively. The hazard ratio for macroscopic disease at the primary site or the nodes was 1.25 (95% confidence interval 0.57-2.77), P=.58. Conclusions: No statistically significant differences in time to locoregional failure were identified between patients with negative margins and those with microscopic or gross residual disease. These results must, however, be interpreted with caution because of the limited sample size.« less

Dietary Sodium Modulation of Aldosterone Activation and Renal Function During the Progression of Experimental Heart Failure Miller: Dietary Sodium and Early Heart Failure

PubMed Central

Miller, Wayne L.; Borgeson, Daniel D.; Grantham, J. Aaron; Luchner, Andreas; Redfield, Margaret M.; Burnett, John C.

2015-01-01

Aims Aldosterone activation is central to the sodium-fluid retention that marks the progression of heart failure (HF). The actions of dietary sodium restriction, a mainstay in HF management, on cardiorenal and neuroendocrine adaptations during the progression of HF are poorly understood. The study aim was to assess the role of dietary sodium during the progression of experimental HF. Methods and Results Experimental HF was produced in a canine model by rapid right ventricular pacing which evolves from early mild HF to overt, severe HF. Dogs were fed one of three diets: 1) high sodium [250 mEq (5.8 grams) per day, n=6]; 2) standard sodium [58 mEq (1.3 grams) per day, n=6]; and 3) sodium restriction [11 mEq (0.25 grams) per day, n=6]. During the 38 day study hemodynamics, renal function, renin activity (PRA), and aldosterone were measured. Changes in hemodynamics at 38 days were similar in all three groups, as were changes in renal function. Aldosterone activation was demonstrated in all three groups, however, dietary sodium restriction, in contrast to high sodium, resulted in early (10 days) activation of PRA and aldosterone. High sodium demonstrated significant suppression of aldosterone activation over the course of HF progression. Conclusions Excessive dietary sodium restriction particularly in early stage HF results in early aldosterone activation, while normal and excess sodium intake are associated with delayed or suppressed activation. These findings warrant evaluation in humans to determine if dietary sodium manipulation, particularly during early stage HF, may have a significant impact on neuroendocrine disease progression. PMID:25823360

Cadaveric study validating in vitro monitoring techniques to measure the failure mechanism of glenoid implants against clinical CT.

PubMed

Junaid, Sarah; Gregory, Thomas; Fetherston, Shirley; Emery, Roger; Amis, Andrew A; Hansen, Ulrich

2018-03-23

Definite glenoid implant loosening is identifiable on radiographs, however, identifying early loosening still eludes clinicians. Methods to monitor glenoid loosening in vitro have not been validated to clinical imaging. This study investigates the correlation between in vitro measures and CT images. Ten cadaveric scapulae were implanted with a pegged glenoid implant and fatigue tested to failure. Each scapulae were cyclically loaded superiorly and CT scanned every 20,000 cycles until failure to monitor progressive radiolucent lines. Superior and inferior rim displacements were also measured. A finite element (FE) model of one scapula was used to analyze the interfacial stresses at the implant/cement and cement/bone interfaces. All ten implants failed inferiorly at the implant-cement interface, two also failed at the cement-bone interface inferiorly, and three showed superior failure. Failure occurred at of 80,966 ± 53,729 (mean ± SD) cycles. CT scans confirmed failure of the fixation, and in most cases, was observed either before or with visual failure. Significant correlations were found between inferior rim displacement, vertical head displacement and failure of the glenoid implant. The FE model showed peak tensile stresses inferiorly and high compressive stresses superiorly, corroborating experimental findings. In vitro monitoring methods correlated to failure progression in clinical CT images possibly indicating its capacity to detect loosening earlier for earlier clinical intervention if needed. Its use in detecting failure non-destructively for implant development and testing is also valuable. The study highlights failure at the implant-cement interface and early signs of failure are identifiable in CT images. © 2018 The Authors. Journal of Orthopaedic Research ® Published by Wiley Periodicals, Inc. on behalf of the Orthopaedic Research Society. J Orthop Res 9999:XX-XX, 2018. © 2018 The Authors. Journal of Orthopaedic Research® Published by Wiley Periodicals, Inc. on behalf of the Orthopaedic Research Society.

Evaluation of the Oxford Classification of IgA nephropathy: a systematic review and meta-analysis.

PubMed

Lv, Jicheng; Shi, Sufang; Xu, Damin; Zhang, Hong; Troyanov, Stéphan; Cattran, Daniel C; Wang, Haiyan

2013-11-01

The Oxford Classification of the pathology of immunoglobulin A (IgA) nephropathy, developed in 2009, is highly predictive of renal prognosis. It has been validated in different populations, but the results remain inconsistent. Systematic review and meta-analysis. Patients with biopsy-proven primary IgA nephropathy. Studies assessing the Oxford Classification of IgA nephropathy published between January 2009 and December 2012 were included following systematic searching of the MEDLINE and EMBASE databases. 4 pathologic lesions of the Oxford Classification: mesangial hypercellularity (M), endocapillary hypercellularity (E), segmental glomerulosclerosis (S), and tubular atrophy/interstitial fibrosis (T). Kidney failure defined as doubled serum creatinine level, 50% decline in estimated glomerular filtration rate, or end-stage kidney disease. 16 retrospective cohort studies with 3,893 patients and 570 kidney failure events were included. In a multivariate model, HRs for kidney failure were 0.6 (95% CI, 0.5-0.8; P < 0.001), 1.8 (95% CI, 1.4-2.4; P < 0.001), and 3.2 (95% CI, 1.8-5.6; P < 0.001) for scores of M0 (mesangial hypercellularity score ≤0.5), S1 (presence of segmental glomerulosclerosis), and T1/2 (>25% tubular atrophy/interstitial fibrosis), respectively, without evidence of heterogeneity. Pooled results showed that E lesions were not associated with kidney failure (HR, 1.4; 95% CI, 0.9-2.0; P = 0.1), with evidence of heterogeneity (I(2) = 54.1%; P = 0.01). Crescent (C) lesions were associated with kidney failure (HR, 2.3; 95% CI, 1.6-3.4; P < 0.001), with no evidence of heterogeneity (I(2) = 14.7%; P = 0.3). All studies were retrospective. This was not an individual-patient-data meta-analysis. This study suggests that M, S, T, and C lesions, but not E lesions, are associated strongly with progression to kidney failure and thus should be included in the Oxford Classification system. Copyright © 2013 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Simulation for Prediction of Entry Article Demise (SPEAD): an Analysis Tool for Spacecraft Safety Analysis and Ascent/Reentry Risk Assessment

NASA Technical Reports Server (NTRS)

Ling, Lisa

2014-01-01

For the purpose of performing safety analysis and risk assessment for a probable offnominal suborbital/orbital atmospheric reentry resulting in vehicle breakup, a synthesis of trajectory propagation coupled with thermal analysis and the evaluation of node failure is required to predict the sequence of events, the timeline, and the progressive demise of spacecraft components. To provide this capability, the Simulation for Prediction of Entry Article Demise (SPEAD) analysis tool was developed. This report discusses the capabilities, modeling, and validation of the SPEAD analysis tool. SPEAD is applicable for Earth or Mars, with the option for 3 or 6 degrees-of-freedom (DOF) trajectory propagation. The atmosphere and aerodynamics data are supplied in tables, for linear interpolation of up to 4 independent variables. The gravitation model can include up to 20 zonal harmonic coefficients. The modeling of a single motor is available and can be adapted to multiple motors. For thermal analysis, the aerodynamic radiative and free-molecular/continuum convective heating, black-body radiative cooling, conductive heat transfer between adjacent nodes, and node ablation are modeled. In a 6- DOF simulation, the local convective heating on a node is a function of Mach, angle-ofattack, and sideslip angle, and is dependent on 1) the location of the node in the spacecraft and its orientation to the flow modeled by an exposure factor, and 2) the geometries of the spacecraft and the node modeled by a heating factor and convective area. Node failure is evaluated using criteria based on melting temperature, reference heat load, g-load, or a combination of the above. The failure of a liquid propellant tank is evaluated based on burnout flux from nucleate boiling or excess internal pressure. Following a component failure, updates are made as needed to the spacecraft mass and aerodynamic properties, nodal exposure and heating factors, and nodal convective and conductive areas. This allows the trajectory to be propagated seamlessly in a single run, inclusive of the trajectories of components that have separated from the spacecraft. The node ablation simulates the decreasing mass and convective/reference areas, and variable heating factor. A built-in database provides the thermo-mechanical properties of For the purpose of performing safety analysis and risk assessment for a probable offnominal suborbital/orbital atmospheric reentry resulting in vehicle breakup, a synthesis of trajectory propagation coupled with thermal analysis and the evaluation of node failure is required to predict the sequence of events, the timeline, and the progressive demise of spacecraft components. To provide this capability, the Simulation for Prediction of Entry Article Demise (SPEAD) analysis tool was developed. This report discusses the capabilities, modeling, and validation of the SPEAD analysis tool. SPEAD is applicable for Earth or Mars, with the option for 3 or 6 degrees-of-freedom (DOF) trajectory propagation. The atmosphere and aerodynamics data are supplied in tables, for linear interpolation of up to 4 independent variables. The gravitation model can include up to 20 zonal harmonic coefficients. The modeling of a single motor is available and can be adapted to multiple motors. For thermal analysis, the aerodynamic radiative and free-molecular/continuum convective heating, black-body radiative cooling, conductive heat transfer between adjacent nodes, and node ablation are modeled. In a 6- DOF simulation, the local convective heating on a node is a function of Mach, angle-ofattack, and sideslip angle, and is dependent on 1) the location of the node in the spacecraft and its orientation to the flow modeled by an exposure factor, and 2) the geometries of the spacecraft and the node modeled by a heating factor and convective area. Node failure is evaluated using criteria based on melting temperature, reference heat load, g-load, or a combination of the above. The failure of a liquid propellant tank is evaluated based on burnout flux from nucleate boiling or excess internal pressure. Following a component failure, updates are made as needed to the spacecraft mass and aerodynamic properties, nodal exposure and heating factors, and nodal convective and conductive areas. This allows the trajectory to be propagated seamlessly in a single run, inclusive of the trajectories of components that have separated from the spacecraft. The node ablation simulates the decreasing mass and convective/reference areas, and variable heating factor. A built-in database provides the thermo-mechanical properties of

A Progressive Damage Methodology for Residual Strength Predictions of Notched Composite Panels

NASA Technical Reports Server (NTRS)

Coats, Timothy W.; Harris, Charles E.

1998-01-01

The translaminate fracture behavior of carbon/epoxy structural laminates with through-penetration notches was investigated to develop a residual strength prediction methodology for composite structures. An experimental characterization of several composite materials systems revealed a fracture resistance behavior that was very similar to the R-curve behavior exhibited by ductile metals. Fractographic examinations led to the postulate that the damage growth resistance was primarily due to fractured fibers in the principal load-carrying plies being bridged by intact fibers of the adjacent plies. The load transfer associated with this bridging mechanism suggests that a progressive damage analysis methodology will be appropriate for predicting the residual strength of laminates with through-penetration notches. A progressive damage methodology developed by the authors was used to predict the initiation and growth of matrix cracks and fiber fracture. Most of the residual strength predictions for different panel widths, notch lengths, and material systems were within about 10% of the experimental failure loads.

Progressive Fracture of Composite Structures

NASA Technical Reports Server (NTRS)

Minnetyan, Levon

2001-01-01

This report includes the results of a research in which the COmposite Durability STRuctural ANalysis (CODSTRAN) computational simulation capabilities were augmented and applied to various structures for demonstration of the new features and verification. The first chapter of this report provides an introduction to the computational simulation or virtual laboratory approach for the assessment of damage and fracture progression characteristics in composite structures. The second chapter outlines the details of the overall methodology used, including the failure criteria and the incremental/iterative loading procedure with the definitions of damage, fracture, and equilibrium states. The subsequent chapters each contain an augmented feature of the code and/or demonstration examples. All but one of the presented examples contains laminated composite structures with various fiber/matrix constituents. For each structure simulated, damage initiation and progression mechanisms are identified and the structural damage tolerance is quantified at various degradation stages. Many chapters contain the simulation of defective and defect free structures to evaluate the effects of existing defects on structural durability.

Towards a contemporary, comprehensive scoring system for determining technical outcomes of hybrid percutaneous chronic total occlusion treatment: The RECHARGE score.

PubMed

Maeremans, Joren; Spratt, James C; Knaapen, Paul; Walsh, Simon; Agostoni, Pierfrancesco; Wilson, William; Avran, Alexandre; Faurie, Benjamin; Bressollette, Erwan; Kayaert, Peter; Bagnall, Alan J; Smith, Dave; McEntegart, Margaret B; Smith, William H T; Kelly, Paul; Irving, John; Smith, Elliot J; Strange, Julian W; Dens, Jo

2018-02-01

This study sought to create a contemporary scoring tool to predict technical outcomes of chronic total occlusion (CTO) percutaneous coronary intervention (PCI) from patients treated by hybrid operators with differing experience levels. Current scoring systems need regular updating to cope with the positive evolutions regarding materials, techniques, and outcomes, while at the same time being applicable for a broad range of operators. Clinical and angiographic characteristics from 880 CTO-PCIs included in the REgistry of CrossBoss and Hybrid procedures in FrAnce, the NetheRlands, BelGium and UnitEd Kingdom (RECHARGE) were analyzed by using a derivation and validation set (2:1 ratio). Variables significantly associated with technical failure in the multivariable analysis were incorporated in the score. Subsequently, the discriminatory capacity was assessed and the validation set was used to compare with the J-CTO score and PROGRESS scores. Technical success in the derivation and validation sets was 83% and 85%, respectively. Multivariate analysis identified six parameters associated with technical failure: blunt stump (beta coefficient (b) = 1.014); calcification (b = 0.908); tortuosity ≥45° (b = 0.964); lesion length 20 mm (b = 0.556); diseased distal landing zone (b = 0.794), and previous bypass graft on CTO vessel (b = 0.833). Score variables remained significant after bootstrapping. The RECHARGE score showed better discriminatory capacity in both sets (area-under-the-curve (AUC) = 0.783 and 0.711), compared to the J-CTO (AUC = 0.676) and PROGRESS (AUC = 0.608) scores. The RECHARGE score is a novel, easy-to-use tool for assessing the risk for technical failure in hybrid CTO-PCI and has the potential to perform well for a broad community of operators. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Pathophysiological relationships between heart failure and depression and anxiety.

PubMed

Chapa, Deborah W; Akintade, Bimbola; Son, Heesook; Woltz, Patricia; Hunt, Dennis; Friedmann, Erika; Hartung, Mary Kay; Thomas, Sue Ann

2014-04-01

Depression and anxiety are common comorbid conditions in patients with heart failure. Patients with heart failure and depression have increased mortality. The association of anxiety with increased mortality in patients with heart failure is not established. The purpose of this article is to illustrate the similarities of the underlying pathophysiology of heart failure, depression, and anxiety by using the Biopsychosocial Holistic Model of Cardiovascular Health. Depression and anxiety affect biological processes of cardiovascular function in patients with heart failure by altering neurohormonal function via activation of the hypothalamic-pituitary-adrenal axis, autonomic dysregulation, and activation of cytokine cascades and platelets. Patients with heart failure and depression or anxiety may exhibit a continued cycle of heart failure progression, increased depression, and increased anxiety. Understanding the underlying pathophysiological relationships in patients with heart failure who experience comorbid depression and/or anxiety is critical in order to implement appropriate treatments, educate patients and caregivers, and educate other health professionals.

Schooling as a Lottery: Racial Differences in School Advancement in Urban South Africa†

PubMed Central

Lam, David; Ardington, Cally; Leibbrandt, Murray

2010-01-01

This paper analyzes the large racial differences in progress through secondary school in South Africa. Using recently collected longitudinal data we find that grade advancement is strongly associated with scores on a baseline literacy and numeracy test. In grades 8-11 the effect of these scores on grade progression is much stronger for white and coloured students than for African students, while there is no racial difference in the impact of the scores on passing the nationally standardized grade 12 matriculation exam. We develop a stochastic model of grade repetition that generates predictions consistent with these results. The model predicts that a larger stochastic component in the link between learning and measured performance will generate higher enrollment, higher failure rates, and a weaker link between ability and grade progression. The results suggest that grade progression in African schools is poorly linked to actual ability and learning. The results point to the importance of considering the stochastic component of grade repetition in analyzing school systems with high failure rates. PMID:21499515

Pathophysiology of chronic heart failure.

PubMed

Francis, G S

2001-05-07

Heart failure is a changing paradigm. The hemodynamic model, which served our needs well from the 1950s through the early 1980s, has now been largely abandoned, except for the management of decompensated patients in the hospital. The pathophysiology is exceedingly complex and involves structural changes, such as loss of myofilaments, apoptosis and disorganization of the cytoskeleton, as well as disturbances in Ca(2+) homeostasis, alteration in receptor density, signal transduction, and collagen synthesis. A more contemporary working hypothesis is that heart failure is a progressive disorder of left ventricular remodeling, usually resulting from an index event, that culminates in a clinical syndrome characterized by impaired cardiac function and circulatory congestion. This change in the framework of our understanding of the pathophysiology of heart failure is predicated on the results of numerous clinical trials conducted during the past 20 years. New therapies are now evolving that are designed to inhibit neuroendocrine and cytokine activation, whereas drugs specifically designed to heighten cardiac contractility and "unload" the left ventricle have proven to be unhelpful in long-term management of patients with chronic heart failure. However, the hemodynamic model is still relevant for patients in the hospital with decompensated heart failure, where positive inotropic drugs and vasodilators are still widely used. The modern treatment of chronic heart failure is now largely based on the neurohormonal hypothesis, which states that neuroendocrine activation is important in the progression of heart failure and that inhibition of neurohormones is likely to have long-term benefit with regard to morbidity and mortality. Thus, the evolution of treatment for chronic heart failure as a result of clinical trials has provided much enlightenment for our understanding of the fundamental biology of the disorder, a reversal of the usual flow of information from basic science to clinical investigation.

Optimizing care for Canadians with diabetic nephropathy in 2015.

PubMed

Lloyd, Alissa; Komenda, Paul

2015-06-01

Diabetic chronic kidney disease (CKD) is the cause of kidney failure in approximately 35% of Canadian patients requiring dialysis. Traditionally, only a minority of patients with type 2 diabetes and CKD progress to kidney failure because they die of a cardiovascular event first. However, with contemporary therapies for diabetes and cardiovascular disease, this may no longer be true. The classic description of diabetic CKD is the development of albuminuria followed by progressive kidney dysfunction in a patient with longstanding diabetes. Many exciting candidate agents are under study to halt the progression of diabetic CKD; current therapies center on optimizing glycemic control, renin angiotensin system inhibition, blood pressure control and lipid management. Lifestyle modifications, such as salt and protein restriction as well as smoking cessation, may also be of benefit. Unfortunately, these accepted therapies do not entirely halt the progression of diabetic CKD. Also unfortunately, the presence of CKD in general is under-recognized by primary care providers, which can lead to late referral, missed opportunities for preventive care and inadvertent administration of potentially harmful interventions. Not all patients require referral to nephrology for diagnosis and management, but modern risk-prediction algorithms, such as the kidney failure risk equation, may help to guide referral appropriateness and dialysis modality planning in subspecialty nephrology multidisciplinary care clinics. Copyright © 2015 Canadian Diabetes Association. Published by Elsevier Inc. All rights reserved.

Diagnosis of rare inherited glyoxalate metabolic disorders through in-situ analysis of renal stones

NASA Astrophysics Data System (ADS)

Jacob, D. E.; Grohe, B.; Hoppe, B.; Beck, B. B.; Tessadri, R.

2012-04-01

The primary hyperoxalurias type I - III constitute rare autosomal-recessive inherited disorders of the human glyoxylate metabolism. By mechanisms that are ill understood progressive nephrocalcinosis and recurrent urolithiasis (kidney stone formation) often starting in early childhood, along with their secondary complications results in loss of nephron mass which progresses to end-stage renal failure over time. In the most frequent form, end-stage renal failure (ESRF) is the rule and combined liver/kidney transplantation respectively pre-emptive liver transplantation are the only causative treatment today. Hence, this contributes significantly to healthcare costs and early diagnosis is extremely important for a positive outcome for the patient. We are developing a stone-based diagnostic method by in-detail multi-methods investigation of the crystalline moiety in concert with urine and stone proteomics. Stone analysis will allow faster analysis at low-impact for the patients in the early stages of the disease. First results from combined spectroscopic (Raman, FTIR)and geochemical micro-analyses (Electron Microprobe and Laser Ablation ICP-MS) are presented here that show significant differences between stones from hyperoxaluria patients and those formed by patients without this disorder (idiopathic stones). Major differences exist in chemistry as well as in morphology and phase composition of the stones. Ca/P ratios and Mg contents differentiate between oxalate-stones from hyperoxaluria patients and idiopathic stones. Results show that also within the different subtypes of primary hyperoxaluria significant differences can be found in stone composition. These imply differences in stone formation which could be exploited for new therapeutic pathways. Furthermore, the results provide important feedback for suspected but yet unconfirmed cases of primary hyperoxaluria when used in concert with the genetic methods routinely applied.

Three-dimensional conformal radiotherapy with concurrent chemotherapy for postoperative recurrence of esophageal squamous cell carcinoma: clinical efficacy and failure pattern

PubMed Central

2013-01-01

Background To assess the therapeutic outcome and failure pattern of three-dimensional conformal radiotherapy (3D-CRT)-based concurrent chemoradiotherapy (CCRT) for recurrence of esophageal squamous cell carcinoma (SCC) after radical surgery. Methods Treatment outcome and failure pattern were retrospectively evaluated in 83 patients with localized cervical and thoracic recurrences after radical surgery for thoracic esophageal SCC. All patients were treated with 3DCRT-based CCRT (median radiation dose 60 Gy), in which 39 received concurrent cisplatin plus 5-fluorouracil (PF), and 44 received concurrent docetaxel plus cisplatin (TP). Treatment response was evaluated at 1–3 months after CCRT. Results With a median follow-up of 34 months (range, 2–116 months), the 3-year overall survival (OS) of all the patients was 51.8% and the median OS time was 43.0 months. The overall tumor response rate was 75.9% (63/83), with a complete remission (CR) rate of 44.6% (37/83). In univariate analysis, tumor response after CCRT (p = 0.000), recurrence site (p = 0.028) and concurrent chemotherapy (p = 0.090) showed a trend favoring better OS. Multivariate analysis revealed that tumor response after CCRT (p = 0.000) and concurrent chemotherapy (p = 0.010) were independent predictors of OS. Forty-seven patients had progressive diseases after CCRT, 27 had local failure (27/47, 57.4%), 18 had distant metastasis (18/47, 38.3%) and 2 had both local and distant failures (2/47, 4.3%). Conclusions 3DCRT-based CCRT is effective in postoperatively recurrent esophageal SCC. Patients that obtained complete remission after CCRT appeared to achieve long-term OS and might benefit from concurrent TP regimen. Local and distant failures remained high and prospective studies are needed to validate these factors. PMID:24139225

Three-dimensional conformal radiotherapy with concurrent chemotherapy for postoperative recurrence of esophageal squamous cell carcinoma: clinical efficacy and failure pattern.

PubMed

Bao, Yong; Liu, ShiLiang; Zhou, QiChao; Cai, PeiQiang; Anfossi, Simone; Li, QiaoQiao; Hu, YongHong; Liu, MengZhong; Fu, JianHua; Rong, TieHua; Li, Qun; Liu, Hui

2013-10-18

To assess the therapeutic outcome and failure pattern of three-dimensional conformal radiotherapy (3D-CRT)-based concurrent chemoradiotherapy (CCRT) for recurrence of esophageal squamous cell carcinoma (SCC) after radical surgery. Treatment outcome and failure pattern were retrospectively evaluated in 83 patients with localized cervical and thoracic recurrences after radical surgery for thoracic esophageal SCC. All patients were treated with 3DCRT-based CCRT (median radiation dose 60 Gy), in which 39 received concurrent cisplatin plus 5-fluorouracil (PF), and 44 received concurrent docetaxel plus cisplatin (TP). Treatment response was evaluated at 1-3 months after CCRT. With a median follow-up of 34 months (range, 2-116 months), the 3-year overall survival (OS) of all the patients was 51.8% and the median OS time was 43.0 months. The overall tumor response rate was 75.9% (63/83), with a complete remission (CR) rate of 44.6% (37/83). In univariate analysis, tumor response after CCRT (p = 0.000), recurrence site (p = 0.028) and concurrent chemotherapy (p = 0.090) showed a trend favoring better OS. Multivariate analysis revealed that tumor response after CCRT (p = 0.000) and concurrent chemotherapy (p = 0.010) were independent predictors of OS. Forty-seven patients had progressive diseases after CCRT, 27 had local failure (27/47, 57.4%), 18 had distant metastasis (18/47, 38.3%) and 2 had both local and distant failures (2/47, 4.3%). 3DCRT-based CCRT is effective in postoperatively recurrent esophageal SCC. Patients that obtained complete remission after CCRT appeared to achieve long-term OS and might benefit from concurrent TP regimen. Local and distant failures remained high and prospective studies are needed to validate these factors.

Data driven linear algebraic methods for analysis of molecular pathways: application to disease progression in shock/trauma.

PubMed

McGuire, Mary F; Sriram Iyengar, M; Mercer, David W

2012-04-01

Although trauma is the leading cause of death for those below 45years of age, there is a dearth of information about the temporal behavior of the underlying biological mechanisms in those who survive the initial trauma only to later suffer from syndromes such as multiple organ failure. Levels of serum cytokines potentially affect the clinical outcomes of trauma; understanding how cytokine levels modulate intra-cellular signaling pathways can yield insights into molecular mechanisms of disease progression and help to identify targeted therapies. However, developing such analyses is challenging since it necessitates the integration and interpretation of large amounts of heterogeneous, quantitative and qualitative data. Here we present the Pathway Semantics Algorithm (PSA), an algebraic process of node and edge analyses of evoked biological pathways over time for in silico discovery of biomedical hypotheses, using data from a prospective controlled clinical study of the role of cytokines in multiple organ failure (MOF) at a major US trauma center. A matrix algebra approach was used in both the PSA node and PSA edge analyses with different matrix configurations and computations based on the biomedical questions to be examined. In the edge analysis, a percentage measure of crosstalk called XTALK was also developed to assess cross-pathway interference. In the node/molecular analysis of the first 24h from trauma, PSA uncovered seven molecules evoked computationally that differentiated outcomes of MOF or non-MOF (NMOF), of which three molecules had not been previously associated with any shock/trauma syndrome. In the edge/molecular interaction analysis, PSA examined four categories of functional molecular interaction relationships--activation, expression, inhibition, and transcription--and found that the interaction patterns and crosstalk changed over time and outcome. The PSA edge analysis suggests that a diagnosis, prognosis or therapy based on molecular interaction mechanisms may be most effective within a certain time period and for a specific functional relationship. Copyright © 2011 Elsevier Inc. All rights reserved.

Data driven linear algebraic methods for analysis of molecular pathways: application to disease progression in shock/trauma

PubMed Central

McGuire, Mary F.; Iyengar, M. Sriram; Mercer, David W.

2012-01-01

Motivation Although trauma is the leading cause of death for those below 45 years of age, there is a dearth of information about the temporal behavior of the underlying biological mechanisms in those who survive the initial trauma only to later suffer from syndromes such as multiple organ failure. Levels of serum cytokines potentially affect the clinical outcomes of trauma; understanding how cytokine levels modulate intra-cellular signaling pathways can yield insights into molecular mechanisms of disease progression and help to identify targeted therapies. However, developing such analyses is challenging since it necessitates the integration and interpretation of large amounts of heterogeneous, quantitative and qualitative data. Here we present the Pathway Semantics Algorithm (PSA), an algebraic process of node and edge analyses of evoked biological pathways over time for in silico discovery of biomedical hypotheses, using data from a prospective controlled clinical study of the role of cytokines in multiple organ failure (MOF) at a major US trauma center. A matrix algebra approach was used in both the PSA node and PSA edge analyses with different matrix configurations and computations based on the biomedical questions to be examined. In the edge analysis, a percentage measure of crosstalk called XTALK was also developed to assess cross-pathway interference. Results In the node/molecular analysis of the first 24 hours from trauma, PSA uncovered 7 molecules evoked computationally that differentiated outcomes of MOF or non-MOF (NMOF), of which 3 molecules had not been previously associated with any shock / trauma syndrome. In the edge/molecular interaction analysis, PSA examined four categories of functional molecular interaction relationships – activation, expression, inhibition, and transcription – and found that the interaction patterns and crosstalk changed over time and outcome. The PSA edge analysis suggests that a diagnosis, prognosis or therapy based on molecular interaction mechanisms may be most effective within a certain time period and for a specific functional relationship. PMID:22200681

Out-of-pocket costs of HAART limit HIV treatment responses in Botswana's private sector.

PubMed

Bisson, Gregory P; Frank, Ian; Gross, Robert; Lo Re, Vincent; Strom, Jordan B; Wang, Xingmei; Mogorosi, Mpho; Gaolathe, Tendani; Ndwapi, Ndwapi; Friedman, Harvey; Strom, Brian L; Dickinson, Diana

2006-06-12

A large number of HIV-infected patients in sub-Saharan Africa pay out-of-pocket for HAART. This analysis from Botswana indicates that higher median out-of-pocket regimen costs to patients for the initial 30 days of HAART are associated with failure to achieve a viral load< 400 copies/ml [US$32; interquartile range (IQR), 20-84 compared with US$22; (IQR, 17-36), P = 0.001]. HAART costs should be minimized as scale-up efforts in sub-Saharan Africa progress.

Effects of bisoprolol and losartan treatment in the hypertrophic and failing right heart.

PubMed

Andersen, Stine; Schultz, Jacob Gammelgaard; Andersen, Asger; Ringgaard, Steffen; Nielsen, Jan M; Holmboe, Sarah; Vildbrad, Mads D; de Man, Frances S; Bogaard, Harm J; Vonk-Noordegraaf, Anton; Nielsen-Kudsk, Jens Erik

2014-11-01

Sympathetic adrenergic stimulation and the renin-angiotensin-aldosterone system are highly elevated in right heart failure. We evaluated if treatment with the adrenergic receptor blocker bisoprolol or the angiotensin II receptor blocker losartan could prevent the progression of right ventricular (RV) hypertrophy and failure in rats after pulmonary trunk banding (PTB). Male Wistar rats were randomized to severe PTB with a 0.5-mm banding clip (PTB0.5, n = 29), moderate PTB with a 0.6-mm banding clip (PTB0.6, n = 28), or sham operation (SHAM, n = 13). The PTB0.5 and PTB0.6 rats were randomized to 6 weeks of 10 mg/kg/d bisoprolol treatment, 20 mg/kg/d losartan treatment, or vehicle treatment. The PTB caused hypertrophy, dilation, and reduced function of the RV in all rats subjected to the procedure. Rats subjected to the more severe banding developed decompensated RV failure with extracardiac manifestations. Treatment with bisoprolol slowed the heart rate, and treatment with losartan lowered mean arterial pressure, confirming adequate dosing, but none of the treatments improved RV function or arrested the progression of RV hypertrophy and failure compared with vehicle. In our PTB model of pressure overload-induced RV hypertrophy and failure, treatment with bisoprolol and losartan did not demonstrate any beneficial effects in compensated or decompensated RV failure. Copyright © 2014 Elsevier Inc. All rights reserved.

The heterogeneity and natural history of mild cognitive impairment of visual memory predominant type.

PubMed

Ye, Byoung Seok; Chin, Juhee; Kim, Seong Yoon; Lee, Jung-Sun; Kim, Eun-Joo; Lee, Yunhwan; Hong, Chang Hyung; Choi, Seong Hye; Park, Kyung Won; Ku, Bon D; Moon, So Young; Kim, SangYun; Han, Seol-Hee; Lee, Jae-Hong; Cheong, Hae-Kwan; Park, Sun Ah; Jeong, Jee Hyang; Na, Duk L; Seo, Sang Won

2015-01-01

We evaluate the longitudinal outcomes of amnestic mild cognitive impairment (aMCI) according to the modality of memory impairment involved. We recruited 788 aMCI patients and followed them up. aMCI patients were categorized into three groups according to the modality of memory impairment: Visual-aMCI, only visual memory impaired; Verbal-aMCI, only verbal memory impaired; and Both-aMCI, both visual and verbal memory impaired. Each aMCI group was further categorized according to the presence or absence of recognition failure. Risk of progression to dementia was compared with pooled logistic regression analyses while controlling for age, gender, education, and interval from baseline. Of the sample, 219 (27.8%) aMCI patients progressed to dementia. Compared to the Visual-aMCI group, Verbal-aMCI (OR = 1.98, 95% CI = 1.19-3.28, p = 0.009) and Both-aMCI (OR = 3.05, 95% CI = 1.97-4.71, p < 0.001) groups exhibited higher risks of progression to dementia. Memory recognition failure was associated with increased risk of progression to dementia only in the Visual-aMCI group, but not in the Verbal-aMCI and Both-aMCI groups. The Visual-aMCI without recognition failure group were subcategorized into aMCI with depression, small vessel disease, or accelerated aging, and these subgroups showed a variety of progression rates. Our findings underlined the importance of heterogeneous longitudinal outcomes of aMCI, especially Visual-aMCI, for designing and interpreting future treatment trials in aMCI.

Why Secondary Teachers Fail Students.

ERIC Educational Resources Information Center

Ligon, Glynn; Jackson, Elaine E.

The perceptions of teachers about students' lack of success were studied, and the groundwork was laid for the future study of the effectiveness of a policy of warning students and parents of impending failure. The primary sources of data were teacher-coded reasons for failure, given on notices (progress reports) to secondary school students in the…

Determination of Fracture Parameters for Multiple Cracks of Laminated Composite Finite Plate

NASA Astrophysics Data System (ADS)

Srivastava, Amit Kumar; Arora, P. K.; Srivastava, Sharad Chandra; Kumar, Harish; Lohumi, M. K.

2018-04-01

A predictive method for estimation of stress state at zone of crack tip and assessment of remaining component lifetime depend on the stress intensity factor (SIF). This paper discusses the numerical approach for prediction of first ply failure load (FL), progressive failure load, SIF and critical SIF for multiple cracks configurations of laminated composite finite plate using finite element method (FEM). The Hashin and Chang failure criterion are incorporated in ABAQUS using subroutine approach user defined field variables (USDFLD) for prediction of progressive fracture response of laminated composite finite plate, which is not directly available in the software. A tensile experiment on laminated composite finite plate with stress concentration is performed to validate the numerically predicted subroutine results, shows excellent agreement. The typical results are presented to examine effect of changing the crack tip distance (S), crack offset distance (H), and stacking fiber angle (θ) on FL, and SIF .

25 CFR 30.122 - Must the Bureau assist a school it identified for school improvement, corrective action, or...

Code of Federal Regulations, 2010 CFR

2010-04-01

..., DEPARTMENT OF THE INTERIOR EDUCATION ADEQUATE YEARLY PROGRESS Failure To Make Adequate Yearly Progress § 30... restructuring, the Bureau must provide technical or other assistance described in 20 U.S.C. 6316(b)(4) and 20 U...

25 CFR 30.122 - Must the Bureau assist a school it identified for school improvement, corrective action, or...

Code of Federal Regulations, 2011 CFR

2011-04-01

..., DEPARTMENT OF THE INTERIOR EDUCATION ADEQUATE YEARLY PROGRESS Failure To Make Adequate Yearly Progress § 30... restructuring, the Bureau must provide technical or other assistance described in 20 U.S.C. 6316(b)(4) and 20 U...

Numerical Model for the Study of the Strength and Failure Modes of Rock Containing Non-Persistent Joints

NASA Astrophysics Data System (ADS)

Vergara, Maximiliano R.; Van Sint Jan, Michel; Lorig, Loren

2016-04-01

The mechanical behavior of rock containing parallel non-persistent joint sets was studied using a numerical model. The numerical analysis was performed using the discrete element software UDEC. The use of fictitious joints allowed the inclusion of non-persistent joints in the model domain and simulating the progressive failure due to propagation of existing fractures. The material and joint mechanical parameters used in the model were obtained from experimental results. The results of the numerical model showed good agreement with the strength and failure modes observed in the laboratory. The results showed the large anisotropy in the strength resulting from variation of the joint orientation. Lower strength of the specimens was caused by the coalescence of fractures belonging to parallel joint sets. A correlation was found between geometrical parameters of the joint sets and the contribution of the joint sets strength in the global strength of the specimen. The results suggest that for the same dip angle with respect to the principal stresses; the uniaxial strength depends primarily on the joint spacing and the angle between joints tips and less on the length of the rock bridges (persistency). A relation between joint geometrical parameters was found from which the resulting failure mode can be predicted.

A demonstration of an intelligent control system for a reusable rocket engine

NASA Technical Reports Server (NTRS)

Musgrave, Jeffrey L.; Paxson, Daniel E.; Litt, Jonathan S.; Merrill, Walter C.

1992-01-01

An Intelligent Control System for reusable rocket engines is under development at NASA Lewis Research Center. The primary objective is to extend the useful life of a reusable rocket propulsion system while minimizing between flight maintenance and maximizing engine life and performance through improved control and monitoring algorithms and additional sensing and actuation. This paper describes current progress towards proof-of-concept of an Intelligent Control System for the Space Shuttle Main Engine. A subset of identifiable and accommodatable engine failure modes is selected for preliminary demonstration. Failure models are developed retaining only first order effects and included in a simplified nonlinear simulation of the rocket engine for analysis under closed loop control. The engine level coordinator acts as an interface between the diagnostic and control systems, and translates thrust and mixture ratio commands dictated by mission requirements, and engine status (health) into engine operational strategies carried out by a multivariable control. Control reconfiguration achieves fault tolerance if the nominal (healthy engine) control cannot. Each of the aforementioned functionalities is discussed in the context of an example to illustrate the operation of the system in the context of a representative failure. A graphical user interface allows the researcher to monitor the Intelligent Control System and engine performance under various failure modes selected for demonstration.

[Pathogenetic and Prognostic Role of Growth Factors in the Development of Chronic Heart Failure].

PubMed

Teplyakov, A T; Berezikova, E N; Shilov, S N; Efremova, A V; Pustovetova, M G; Popova, A A; Grakova, E V; Torim, Y Y; Safronov, I D; Andriyanova, A V

2017-10-01

To study the role of growth factors ((vascular endothelial growth factor (VEGF), platelet derived growth factor AB (PDGF-AB) and basic fibroblast growth factor (FGF-basic)) in the development and progression of chronic heart failure (CHF) in patients with ishcemic heart disease (IHD). We included in this study 94 patients with CHF. The control group comprised 32 persons. Blood serum levels of growth factors were determined at baseline and after 12 months of observation by enzyme-linked immunosorbent assay. VEGF, PDGF-AB and FGF-basic play an important role in the pathogenesis and progression of heart failure in patients with IHD, determining the increased risk of adverse cardiovascular events in this pathology. Serum activity of growth factors characterizes the severity and course of CHF: with disease progression levels of VEGF and FGF-basic decrease and PDGF-AB concentration increases. Initial low level of VEGF expression regardless of the sex of the patient's sex, significantly low level of FGF-basic and significantly high PDGF-AB in men characterizes unfavorable course of CHF. A correlation has been established between blood serum levels of VEGF, PDGF-AB and FGF-basic and severity and course of CHF.

A perspective on diuretic resistance in chronic congestive heart failure.

PubMed

Shah, Niel; Madanieh, Raef; Alkan, Mehmet; Dogar, Muhammad U; Kosmas, Constantine E; Vittorio, Timothy J

2017-10-01

Chronic congestive heart failure (CHF) is a complex disorder characterized by inability of the heart to keep up the demands on it, followed by the progressive pump failure and fluid accumulation. Although the loop diuretics are widely used in heart failure (HF) patients, both pharmacodynamic and pharmacokinetic alterations are thought to be responsible for diuretic resistance in these patients. Strategies to overcome diuretic resistance include sodium intake restriction, changes in diuretic dose and route of administration and sequential nephron diuretic therapy. In this review, we discuss the definition, prevalence, mechanism of development and management strategies of diuretic resistance in HF patients.

Novel Cardiac Intracrine Mechanisms Based on Ang-(1-12)/Chymase Axis Require a Revision of Therapeutic Approaches in Human Heart Disease.

PubMed

Reyes, Santiago; Varagic, Jasmina; Ahmad, Sarfaraz; VonCannon, Jessica; Kon, Neal D; Wang, Hao; Groban, Leanne; Cheng, Che Ping; Dell'Italia, Louis J; Ferrario, Carlos M

2017-02-01

Drugs targeting the renin-angiotensin system (RAS), namely angiotensin-converting enzyme (ACE) inhibitors and angiotensin receptor blockers, are the most commonly prescribed drugs for patients with or at risk for cardiovascular events. However, new treatment strategies aimed at mitigating the rise of the heart failure pandemic are warranted because clinical trials show that RAS blockers have limited benefits in halting disease progression. The main goal of this review is to put forward the concept of an intracrine RAS signaling through the novel angiotensin-(1-12)/chymase axis as the main source of deleterious angiotensin II (Ang II) in cardiac maladaptive remodeling leading to heart failure (HF). Expanding traditional knowledge, Ang II can be produced in tissues independently from the circulatory renin-angiotensin system. In the heart, angiotensin-(1-12) [Ang-(1-12)], a recently discovered derivative of angiotensinogen, is a precursor of Ang II, and chymase rather than ACE is the main enzyme contributing to the direct production of Ang II from Ang-(1-12). The Ang-(1-12)/chymase axis is an independent intracrine pathway accounting for the trophic, contractile, and pro-arrhythmic Ang II actions in the human heart. Ang-(1-12) expression and chymase activity have been found elevated in the left atrial appendage of heart disease subjects, suggesting a pivotal role of this axis in the progression of HF. Recent meta-analysis of large clinical trials on the use of ACE inhibitors and angiotensin receptor blockers in cardiovascular disease has demonstrated an imbalance between patients that significantly benefit from these therapeutic agents and those that remain at risk for heart disease progression. Looking to find an explanation, detailed investigation on the RAS has unveiled a previously unrecognized complexity of substrates and enzymes in tissues ultimately associated with the production of Ang II that may explain the shortcomings of ACE inhibition and angiotensin receptor blockade. Discovery of the Ang-(1-12)/chymase axis in human hearts, capable of producing Ang II independently from the circulatory RAS, has led to the notion that a tissue-delimited RAS signaling in an intracrine fashion may account for the deleterious effects of Ang II in the heart, contributing to the transition from maladaptive cardiac remodeling to heart failure. Targeting intracellular RAS signaling may improve current therapies aimed at reducing the burden of heart failure.

The Spectrum of Intermediate Syndrome Following Acute Organophosphate Poisoning: A Prospective Cohort Study from Sri Lanka

PubMed Central

Jayawardane, Pradeepa; Dawson, Andrew H; Weerasinghe, Vajira; Karalliedde, Lakshman; Buckley, Nicholas A; Senanayake, Nimal

2008-01-01

Background Intermediate syndrome (IMS) is a major cause of death from respiratory failure following acute organophosphate poisoning. The objective of this study was to determine repetitive nerve stimulation (RNS) predictors of IMS that would assist in patient management and clinical research. Methods and Findings Seventy-eight consenting symptomatic patients with organophosphate poisoning were assessed prospectively with daily physical examination and RNS. RNS was done on the right and left median and ulnar nerves at 1, 3, 10, 15, 20, and 30 Hz. The study was conducted as a prospective observational cohort study in the Central Province, Sri Lanka. IMS was diagnosed in ten out of 78 patients using a priori clinical diagnostic criteria, and five of them developed respiratory failure. All ten patients showed progressive RNS changes correlating with the severity of IMS. A decrement-increment was observed at intermediate and high frequencies preceding the onset of clinical signs of IMS. As the patient developed clinical signs of IMS, decrement-increment was progressively noted at low and intermediate frequencies and a combination of decrement-increment and repetitive fade or severe decrement was noted at high frequencies. Severe decrement preceded respiratory failure in four patients. Thirty patients developed forme fruste IMS with less severe weakness not progressing to respiratory failure whose RNS was characterized by decrement-increment or a combination of decrement-increment and repetitive fade but never severe decrements. Conclusions Characteristic changes in RNS, preceding the development of IMS, help to identify a subgroup of patients at high risk of developing respiratory failure. The forme fruste IMS with the characteristic early changes on RNS indicates that IMS is a spectrum disorder. RNS changes are objective and precede the diagnosis and complications of IMS. Thus they may be useful in clinical management and research. PMID:18630983

DOE Office of Scientific and Technical Information (OSTI.GOV)

English, Shawn A.; Briggs, Timothy M.; Nelson, Stacy M.

Simulations of low velocity impact with a flat cylindrical indenter upon a carbon fiber fabric reinforced polymer laminate are rigorously validated. Comparison of the impact energy absorption between the model and experiment is used as the validation metric. Additionally, non-destructive evaluation, including ultrasonic scans and three-dimensional computed tomography, provide qualitative validation of the models. The simulations include delamination, matrix cracks and fiber breaks. An orthotropic damage and failure constitutive model, capable of predicting progressive damage and failure, is developed in conjunction and described. An ensemble of simulations incorporating model parameter uncertainties is used to predict a response distribution which ismore » then compared to experimental output using appropriate statistical methods. Lastly, the model form errors are exposed and corrected for use in an additional blind validation analysis. The result is a quantifiable confidence in material characterization and model physics when simulating low velocity impact in structures of interest.« less

[Morphological findings in fatal cases of hantavirus cardiopulmonary syndrome. Report of 7 autopsies].

PubMed

Guzmán G, Pablo; Tapia E, Oscar; Villaseca H, Miguel; Araya O, Juan; Antonio P, Lilia; Lee O, Bolívar; Roa S, Juan

2010-10-01

Hantavirus cardiopulmonary syndrome (HCPS) is an acute infectious disease characterized by sudden cardiorespiratory failure and high mortality, caused by a RNA virus of the genus Hantavirus, family Bunyaviridae, 15% of Chilean cases have been detected in the Araucania Region. To determine in fatal cases of HCPS, clinical and morphological characteristics. Descriptive-retrospective analysis of seven fatal cases with postmortem study of HCPS, attended between 1997 and 2009 at the Hospital of Temuco, Chile. Cases were young patients from rural areas, and presented as an illness of progressive respiratory failure, with leukocytosis, thrombocytopenia and bilateral interstitial pulmonary infiltrates. Main morphological findings were marked intersticial and intraalveolar pulmonary edema, with minimal epithelial injury and mononuclear cell intersticial infiltrate and mild edematous intersticial inflamatory process. Epidemiological, clinical and laboratory background allow to suspect HCPS. In fatal cases, the autopsy makes possible to discard other similar pathologies and provide tissue for confirmation of the disease.

Quantitative validation of carbon-fiber laminate low velocity impact simulations

DOE PAGES

English, Shawn A.; Briggs, Timothy M.; Nelson, Stacy M.

2015-09-26

Simulations of low velocity impact with a flat cylindrical indenter upon a carbon fiber fabric reinforced polymer laminate are rigorously validated. Comparison of the impact energy absorption between the model and experiment is used as the validation metric. Additionally, non-destructive evaluation, including ultrasonic scans and three-dimensional computed tomography, provide qualitative validation of the models. The simulations include delamination, matrix cracks and fiber breaks. An orthotropic damage and failure constitutive model, capable of predicting progressive damage and failure, is developed in conjunction and described. An ensemble of simulations incorporating model parameter uncertainties is used to predict a response distribution which ismore » then compared to experimental output using appropriate statistical methods. Lastly, the model form errors are exposed and corrected for use in an additional blind validation analysis. The result is a quantifiable confidence in material characterization and model physics when simulating low velocity impact in structures of interest.« less

Predicting failing performance on a standardized patient clinical performance examination: the importance of communication and professionalism skills deficits.

PubMed

Chang, Anna; Boscardin, Christy; Chou, Calvin L; Loeser, Helen; Hauer, Karen E

2009-10-01

The purpose is to determine which assessment measures identify medical students at risk of failing a clinical performance examination (CPX). Retrospective case-control, multiyear design, contingency table analysis, n = 149. We identified two predictors of CPX failure in patient-physician interaction skills: low clerkship ratings (odds ratio 1.79, P = .008) and student progress review for communication or professionalism concerns (odds ratio 2.64, P = .002). No assessments predicted CPX failure in clinical skills. Performance concerns in communication and professionalism identify students at risk of failing the patient-physician interaction portion of a CPX. This correlation suggests that both faculty and standardized patients can detect noncognitive traits predictive of failing performance. Early identification of these students may allow for development of a structured supplemental curriculum with increased opportunities for practice and feedback. The lack of predictors in the clinical skills portion suggests limited faculty observation or feedback.

Post-Buckling and Ultimate Strength Analysis of Stiffened Composite Panel Base on Progressive Damage

NASA Astrophysics Data System (ADS)

Zhang, Guofan; Sun, Xiasheng; Sun, Zhonglei

Stiffened composite panel is the typical thin wall structure applied in aerospace industry, and its main failure mode is buckling subjected to compressive loading. In this paper, the development of an analysis approach using Finite Element Method on post-buckling behavior of stiffened composite structures under compression was presented. Then, the numerical results of stiffened panel are obtained by FE simulations. A thorough comparison were accomplished by comparing the load carrying capacity and key position strains of the specimen with test. The comparison indicates that the FEM results which adopted developed methodology could meet the demand of engineering application in predicting the post-buckling behavior of intact stiffened structures in aircraft design stage.

People with heart failure and home health care resource use and outcomes.

PubMed

Madigan, Elizabeth A

2008-04-01

Patients with heart failure represent a common patient population in home health care, yet little is known about their outcomes. Patients with heart failure, regardless of site of care, experience substantial numbers of rehospitalisations in the United States. Home health care is a common postacute care service for patients with heart failure. Retrospective analysis. The study employed a large administrative data base from 2003 - the Outcomes and Assessment Information Set, which is required for all US Medicare and Medicaid patients receiving home health care. There were 145 191 patients with a primary diagnosis of heart failure represented in the data set. The outcomes of interest were the trajectory of care (point of entry and discharge from home health care), hospitalisation, length of stay and change in functional status. Almost three-quarters (73.9%) of patients entered home health care following a hospital stay. Nearly two-thirds (64%) remained at home at discharge from home health care. Approximately 15% of patients are hospitalised during the home health care episode, most often for symptoms consistent with exacerbation of the heart failure, if a reason could be identified. The average length of stay in home health care was 44 days. There was only a small improvement in functional status: 0.50 points for activities of daily living and 0.57 points for instrumental activities of daily living. Similar small improvement occurred in depressive symptoms, 0.68. There may be room for improvement in these outcomes with more recent evidence that suggests strategies for reducing hospitalisation and improving patient functional status abilities. Yet, the chronic progressive nature of heart failure may also provide a limiting factor in the outcomes that can be attained.

New medicinal products for chronic heart failure: advances in clinical trial design and efficacy assessment.

PubMed

Cowie, Martin R; Filippatos, Gerasimos S; Alonso Garcia, Maria de Los Angeles; Anker, Stefan D; Baczynska, Anna; Bloomfield, Daniel M; Borentain, Maria; Bruins Slot, Karsten; Cronin, Maureen; Doevendans, Pieter A; El-Gazayerly, Amany; Gimpelewicz, Claudio; Honarpour, Narimon; Janmohamed, Salim; Janssen, Heidi; Kim, Albert M; Lautsch, Dominik; Laws, Ian; Lefkowitz, Martin; Lopez-Sendon, Jose; Lyon, Alexander R; Malik, Fady I; McMurray, John J V; Metra, Marco; Figueroa Perez, Santiago; Pfeffer, Marc A; Pocock, Stuart J; Ponikowski, Piotr; Prasad, Krishna; Richard-Lordereau, Isabelle; Roessig, Lothar; Rosano, Giuseppe M C; Sherman, Warren; Stough, Wendy Gattis; Swedberg, Karl; Tyl, Benoit; Zannad, Faiez; Boulton, Caroline; De Graeff, Pieter

2017-06-01

Despite the availability of a number of different classes of therapeutic agents with proven efficacy in heart failure, the clinical course of heart failure patients is characterized by a reduction in life expectancy, a progressive decline in health-related quality of life and functional status, as well as a high risk of hospitalization. New approaches are needed to address the unmet medical needs of this patient population. The European Medicines Agency (EMA) is undertaking a revision of its Guideline on Clinical Investigation of Medicinal Products for the Treatment of Chronic Heart Failure. The draft version of the Guideline was released for public consultation in January 2016. The Cardiovascular Round Table of the European Society of Cardiology (ESC), in partnership with the Heart Failure Association of the ESC, convened a dedicated two-day workshop to discuss three main topic areas of major interest in the field and addressed in this draft EMA guideline: (i) assessment of efficacy (i.e. endpoint selection and statistical analysis); (ii) clinical trial design (i.e. issues pertaining to patient population, optimal medical therapy, run-in period); and (iii) research approaches for testing novel therapeutic principles (i.e. cell therapy). This paper summarizes the key outputs from the workshop, reviews areas of expert consensus, and identifies gaps that require further research or discussion. Collaboration between regulators, industry, clinical trialists, cardiologists, health technology assessment bodies, payers, and patient organizations is critical to address the ongoing challenge of heart failure and to ensure the development and market access of new therapeutics in a scientifically robust, practical and safe way. © 2017 The Authors. European Journal of Heart Failure © 2017 European Society of Cardiology.

Closing the loop: modelling of heart failure progression from health to end-stage using a meta-analysis of left ventricular pressure-volume loops.

PubMed

Warriner, David R; Brown, Alistair G; Varma, Susheel; Sheridan, Paul J; Lawford, Patricia; Hose, David R; Al-Mohammad, Abdallah; Shi, Yubing

2014-01-01

The American Heart Association (AHA)/American College of Cardiology (ACC) guidelines for the classification of heart failure (HF) are descriptive but lack precise and objective measures which would assist in categorising such patients. Our aim was two fold, firstly to demonstrate quantitatively the progression of HF through each stage using a meta-analysis of existing left ventricular (LV) pressure-volume (PV) loop data and secondly use the LV PV loop data to create stage specific HF models. A literature search yielded 31 papers with PV data, representing over 200 patients in different stages of HF. The raw pressure and volume data were extracted from the papers using a digitising software package and the means were calculated. The data demonstrated that, as HF progressed, stroke volume (SV), ejection fraction (EF%) decreased while LV volumes increased. A 2-element lumped parameter model was employed to model the mean loops and the error was calculated between the loops, demonstrating close fit between the loops. The only parameter that was consistently and statistically different across all the stages was the elastance (Emax). For the first time, the authors have created a visual and quantitative representation of the AHA/ACC stages of LVSD-HF, from normal to end-stage. The study demonstrates that robust, load-independent and reproducible parameters, such as elastance, can be used to categorise and model HF, complementing the existing classification. The modelled PV loops establish previously unknown physiological parameters for each AHA/ACC stage of LVSD-HF, such as LV elastance and highlight that it this parameter alone, in lumped parameter models, that determines the severity of HF. Such information will enable cardiovascular modellers with an interest in HF, to create more accurate models of the heart as it fails.

Efficacy and Safety of Trabectedin or Dacarbazine for Metastatic Liposarcoma or Leiomyosarcoma After Failure of Conventional Chemotherapy: Results of a Phase III Randomized Multicenter Clinical Trial.

PubMed

Demetri, George D; von Mehren, Margaret; Jones, Robin L; Hensley, Martee L; Schuetze, Scott M; Staddon, Arthur; Milhem, Mohammed; Elias, Anthony; Ganjoo, Kristen; Tawbi, Hussein; Van Tine, Brian A; Spira, Alexander; Dean, Andrew; Khokhar, Nushmia Z; Park, Youn Choi; Knoblauch, Roland E; Parekh, Trilok V; Maki, Robert G; Patel, Shreyaskumar R

2016-03-10

This multicenter study, to our knowledge, is the first phase III trial to compare trabectedin versus dacarbazine in patients with advanced liposarcoma or leiomyosarcoma after prior therapy with an anthracycline and at least one additional systemic regimen. Patients were randomly assigned in a 2:1 ratio to receive trabectedin or dacarbazine intravenously every 3 weeks. The primary end point was overall survival (OS), secondary end points were disease control-progression-free survival (PFS), time to progression, objective response rate, and duration of response-as well as safety and patient-reported symptom scoring. A total of 518 patients were enrolled and randomly assigned to either trabectedin (n = 345) or dacarbazine (n = 173). In the final analysis of PFS, trabectedin administration resulted in a 45% reduction in the risk of disease progression or death compared with dacarbazine (median PFS for trabectedin v dacarbazine, 4.2 v 1.5 months; hazard ratio, 0.55; P < .001); benefits were observed across all preplanned subgroup analyses. The interim analysis of OS (64% censored) demonstrated a 13% reduction in risk of death in the trabectedin arm compared with dacarbazine (median OS for trabectedin v dacarbazine, 12.4 v 12.9 months; hazard ratio, 0.87; P = .37). The safety profiles were consistent with the well-characterized toxicities of both agents, and the most common grade 3 to 4 adverse effects were myelosuppression and transient elevation of transaminases in the trabectedin arm. Trabectedin demonstrates superior disease control versus conventional dacarbazine in patients who have advanced liposarcoma and leiomyosarcoma after they experience failure of prior chemotherapy. Because disease control in advanced sarcomas is a clinically relevant end point, this study supports the activity of trabectedin for patients with these malignancies. © 2015 by American Society of Clinical Oncology.

Probabilistic failure assessment with application to solid rocket motors

NASA Technical Reports Server (NTRS)

Jan, Darrell L.; Davidson, Barry D.; Moore, Nicholas R.

1990-01-01

A quantitative methodology is being developed for assessment of risk of failure of solid rocket motors. This probabilistic methodology employs best available engineering models and available information in a stochastic framework. The framework accounts for incomplete knowledge of governing parameters, intrinsic variability, and failure model specification error. Earlier case studies have been conducted on several failure modes of the Space Shuttle Main Engine. Work in progress on application of this probabilistic approach to large solid rocket boosters such as the Advanced Solid Rocket Motor for the Space Shuttle is described. Failure due to debonding has been selected as the first case study for large solid rocket motors (SRMs) since it accounts for a significant number of historical SRM failures. Impact of incomplete knowledge of governing parameters and failure model specification errors is expected to be important.

Bifocal Intracranial Germinoma: A Retrospective Analysis of Treatment Outcomes in 20 Patients and Review of the Literature

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weksberg, David C.; Shibamoto, Yuta; Paulino, Arnold C., E-mail: apaulino@tmhs.org

Purpose: Bifocal germinoma (BFG) is a rare intracranial neoplasm for which the choice of radiation therapy (RT) field is controversial. Some believe that BFG represents disseminated disease requiring craniospinal irradiation (CSI), whereas others believe that BFG represents localized disease and advocate for more limited fields. Methods and Materials: We analyzed 20 BFG patients at our institutions with classic bifocal lesions (pineal gland and suprasellar region). In addition, we identified 60 BFG patients from the literature. The RT fields, use of chemotherapy and extent of disease were recorded and analyzed for each patient. Results: There were 55 patients with bifocal lesionsmore » only (Group I), and 25 with bifocal lesions plus ventricular and/or CSF positive disease (Group II). The 5-year progression-free survival was 95% for Group I and 80% for Group II. In Group I, there were no failures in patients receiving CSI (n = 11), two spinal failures in those treated with more limited RT fields without chemotherapy (n = 17), and one spinal failure with chemotherapy (n = 23). In Group II, there were no failures in patients receiving CSI (n = 11), but four spinal failures were observed in patients receiving more limited RT fields with chemotherapy (n = 13); 1 patient who received whole-brain RT without chemotherapy experienced failure in the spine and brain. Conclusions: CSI is associated with excellent PFS in BFG. In Group I BFG patients, omission of spinal irradiation appears to be a reasonable approach, especially when chemotherapy is used. Patients with Group II BFG are best treated with CSI.« less

Mitochondrial Bioenergetics and Dysfunction in Failing Heart.

PubMed

Sheeran, Freya L; Pepe, Salvatore

2017-01-01

Energy insufficiency has been recognized as a key feature of systolic heart failure. Although mitochondria have long been known to sustain myocardial work energy supply, the capacity to therapeutically target mitochondrial bioenergetics dysfunction is hampered by a complex interplay of multiple perturbations that progressively compound causing myocardial failure and collapse. Compared to non-failing human donor hearts, activity rates of complexes I and IV, nicotinamide nucleotide transhydrogenase (NADPH-transhydrogenase, Nnt) and the Krebs cycle enzymes isocitrate dehydrogenase, malate dehydrogenase and aconitase are markedly decreased in end-stage heart failure. Diminished REDOX capacity with lower total glutathione and coenzyme Q 10 levels are also a feature of chronic left ventricular failure. Decreased enzyme activities in part relate to abundant and highly specific oxidative, nitrosylative, and hyperacetylation modifications. In this brief review we highlight that energy deficiency in end-stage failing human left ventricle predominantly involves concomitantly impaired activities of key electron transport chain and Krebs cycle enzymes rather than altered expression of respective genes or proteins. Augmented oxidative modification of these enzyme subunit structures, and the formation of highly reactive secondary metabolites, implicates dysfunction due to diminished capacity for management of mitochondrial reactive oxygen species, which contribute further to progressive decreases in bioenergetic capacity and contractile function in human heart failure.

Acoustic emissions (AE) monitoring of large-scale composite bridge components

NASA Astrophysics Data System (ADS)

Velazquez, E.; Klein, D. J.; Robinson, M. J.; Kosmatka, J. B.

2008-03-01

Acoustic Emissions (AE) has been successfully used with composite structures to both locate and give a measure of damage accumulation. The current experimental study uses AE to monitor large-scale composite modular bridge components. The components consist of a carbon/epoxy beam structure as well as a composite to metallic bonded/bolted joint. The bonded joints consist of double lap aluminum splice plates bonded and bolted to carbon/epoxy laminates representing the tension rail of a beam. The AE system is used to monitor the bridge component during failure loading to assess the failure progression and using time of arrival to give insight into the origins of the failures. Also, a feature in the AE data called Cumulative Acoustic Emission counts (CAE) is used to give an estimate of the severity and rate of damage accumulation. For the bolted/bonded joints, the AE data is used to interpret the source and location of damage that induced failure in the joint. These results are used to investigate the use of bolts in conjunction with the bonded joint. A description of each of the components (beam and joint) is given with AE results. A summary of lessons learned for AE testing of large composite structures as well as insight into failure progression and location is presented.

Outcomes of uterine cervical cancer patients with pelvic lymph node metastases after radiotherapy without boost irradiation of metastases.

PubMed

Yoshizawa, Eriko; Koiwai, Keiichiro; Ina, Hironobu; Fukazawa, Ayumu; Sakai, Katsuya; Ozawa, Takesumi; Matsushita, Hirohide; Kadoya, Masumi

2017-04-01

The aim of this study was to evaluate the outcomes of uterine cervical cancer patients with pelvic lymph node (PLN) metastases after radiotherapy without boost irradiation of the metastases and to clarify the necessity of the boost irradiation of metastatic lesions. Thirty-two patients with uterine cervical cancer metastasizing only to the PLN were treated with definitive radiotherapy without boost irradiation of the metastases between 2008 and 2012 at our institution and were selected for this study. The pattern of progression, overall survival, and progression-free survival were analyzed. Ninety percent of the PLN metastases were controlled by radiotherapy. Twenty-two of 32 patients (69%) experienced progression. Distant metastases as initial progression were observed in 21 of these 22 patients (95%). Only two patients experienced failures in pre-treatment metastatic PLN as initial progression, along with other failures. Severe late lower gastrointestinal toxicities were not observed in any patients. Two-year cumulative overall survival and progression-free survival were 74% and 31%, respectively. Boost irradiation of PLN metastases is not necessarily indispensable. Further studies to examine the necessity of boost irradiation of PLN metastases in radiotherapy for uterine cervical cancer patients with metastases are required. © 2017 Japan Society of Obstetrics and Gynecology.

The impact of non-alcoholic fatty liver disease fibrosis score on cardiac prognosis in patients with chronic heart failure.

PubMed

Takahashi, Tetsuya; Watanabe, Tetsu; Shishido, Tetsuro; Watanabe, Ken; Sugai, Takayuki; Toshima, Taku; Kinoshita, Daisuke; Yokoyama, Miyuki; Tamura, Harutoshi; Nishiyama, Satoshi; Arimoto, Takanori; Takahashi, Hiroki; Yamanaka, Tamon; Miyamoto, Takuya; Kubota, Isao

2018-07-01

Liver abnormalities have a strong impact on clinical outcomes in patients with heart failure (HF), and are known as cardio-hepatic syndrome. The non-alcoholic fatty liver disease (NAFLD) fibrosis score (NFS) has been developed to identify liver fibrosis in patients with NAFLD. It remains to be determined whether NFS is associated with cardiovascular prognosis in patients with chronic heart failure (CHF). We calculated NFS in 516 patients with CHF admitted to our hospital. The clinical endpoints were deaths due to progressive HF, myocardial infarction, stroke, and sudden cardiac death, and rehospitalization for worsening HF. There were 173 cardiovascular events noted during a median follow-up of 464 days. Patients with cardiovascular events showed a higher NFS as compared with those without. We divided the patients into four groups according to quartiles of NFS. The proportion of New York Heart Association functional class III/IV and serum brain natriuretic peptide levels were increased with increasing NFS. Kaplan-Meier analysis revealed that cardiovascular event rate was increased with increasing NFS in patients with CHF. In multivariate Cox proportional hazards analysis, NFS was independently associated with cardiovascular events after adjustment for confounding factors. Elevated NFS was associated with unfavorable outcomes in patients with CHF. Liver fibrosis assessed by NFS may provide valuable prognostic information in patients with CHF.

Multinational Assessment of Accuracy of Equations for Predicting Risk of Kidney Failure: A Meta-analysis.

PubMed

Tangri, Navdeep; Grams, Morgan E; Levey, Andrew S; Coresh, Josef; Appel, Lawrence J; Astor, Brad C; Chodick, Gabriel; Collins, Allan J; Djurdjev, Ognjenka; Elley, C Raina; Evans, Marie; Garg, Amit X; Hallan, Stein I; Inker, Lesley A; Ito, Sadayoshi; Jee, Sun Ha; Kovesdy, Csaba P; Kronenberg, Florian; Heerspink, Hiddo J Lambers; Marks, Angharad; Nadkarni, Girish N; Navaneethan, Sankar D; Nelson, Robert G; Titze, Stephanie; Sarnak, Mark J; Stengel, Benedicte; Woodward, Mark; Iseki, Kunitoshi

2016-01-12

Identifying patients at risk of chronic kidney disease (CKD) progression may facilitate more optimal nephrology care. Kidney failure risk equations, including such factors as age, sex, estimated glomerular filtration rate, and calcium and phosphate concentrations, were previously developed and validated in 2 Canadian cohorts. Validation in other regions and in CKD populations not under the care of a nephrologist is needed. To evaluate the accuracy of the risk equations across different geographic regions and patient populations through individual participant data meta-analysis. Thirty-one cohorts, including 721,357 participants with CKD stages 3 to 5 in more than 30 countries spanning 4 continents, were studied. These cohorts collected data from 1982 through 2014. Cohorts participating in the CKD Prognosis Consortium with data on end-stage renal disease. Data were obtained and statistical analyses were performed between July 2012 and June 2015. Using the risk factors from the original risk equations, cohort-specific hazard ratios were estimated and combined using random-effects meta-analysis to form new pooled kidney failure risk equations. Original and pooled kidney failure risk equation performance was compared, and the need for regional calibration factors was assessed. Kidney failure (treatment by dialysis or kidney transplant). During a median follow-up of 4 years of 721,357 participants with CKD, 23,829 cases kidney failure were observed. The original risk equations achieved excellent discrimination (ability to differentiate those who developed kidney failure from those who did not) across all cohorts (overall C statistic, 0.90; 95% CI, 0.89-0.92 at 2 years; C statistic at 5 years, 0.88; 95% CI, 0.86-0.90); discrimination in subgroups by age, race, and diabetes status was similar. There was no improvement with the pooled equations. Calibration (the difference between observed and predicted risk) was adequate in North American cohorts, but the original risk equations overestimated risk in some non-North American cohorts. Addition of a calibration factor that lowered the baseline risk by 32.9% at 2 years and 16.5% at 5 years improved the calibration in 12 of 15 and 10 of 13 non-North American cohorts at 2 and 5 years, respectively (P = .04 and P = .02). Kidney failure risk equations developed in a Canadian population showed high discrimination and adequate calibration when validated in 31 multinational cohorts. However, in some regions the addition of a calibration factor may be necessary.

Orion Burn Management, Nominal and Response to Failures

NASA Technical Reports Server (NTRS)

Odegard, Ryan; Goodman, John L.; Barrett, Charles P.; Pohlkamp, Kara; Robinson, Shane

2016-01-01

An approach for managing Orion on-orbit burn execution is described for nominal and failure response scenarios. The burn management strategy for Orion takes into account per-burn variations in targeting, timing, and execution; crew and ground operator intervention and overrides; defined burn failure triggers and responses; and corresponding on-board software sequencing functionality. Burn-to- burn variations are managed through the identification of specific parameters that may be updated for each progressive burn. Failure triggers and automatic responses during the burn timeframe are defined to provide safety for the crew in the case of vehicle failures, along with override capabilities to ensure operational control of the vehicle. On-board sequencing software provides the timeline coordination for performing the required activities related to targeting, burn execution, and responding to burn failures.

Micromechanics of failure waves in glass. 2: Modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Espinosa, H.D.; Xu, Y.; Brar, N.S.

1997-08-01

In an attempt to elucidate the failure mechanism responsible for the so-called failure waves in glass, numerical simulations of plate and rod impact experiments, with a multiple-plane model, have been performed. These simulations show that the failure wave phenomenon can be modeled by the nucleation and growth of penny-shaped shear defects from the specimen surface to its interior. Lateral stress increase, reduction of spall strength,and progressive attenuation of axial stress behind the failure front are properly predicted by the multiple-plane model. Numerical simulations of high-strain-rate pressure-shear experiments indicate that the model predicts reasonably well the shear resistance of the materialmore » at strain rates as high as 1 {times} 10{sup 6}/s. The agreement is believed to be the result of the model capability in simulating damage-induced anisotropy. By examining the kinetics of the failure process in plate experiments, the authors show that the progressive glass spallation in the vicinity of the failure front and the rate of increase in lateral stress are more consistent with a representation of inelasticity based on shear-activated flow surfaces, inhomogeneous flow, and microcracking, rather than pure microcracking. In the former mechanism, microcracks are likely formed at a later time at the intersection of flow surfaces, in the case of rod-on-rod impact, stress and radial velocity histories predicted by the microcracking model are in agreement with the experimental measurements. Stress attenuation, pulse duration, and release structure are properly simulated. It is shown that failure wave speeds in excess to 3,600 m/s are required for adequate prediction in rod radial expansion.« less

Activation and Inhibition of Sodium-Hydrogen Exchanger Is a Mechanism That Links the Pathophysiology and Treatment of Diabetes Mellitus With That of Heart Failure.

PubMed

Packer, Milton

2017-10-17

The mechanisms underlying the progression of diabetes mellitus and heart failure are closely intertwined, such that worsening of one condition is frequently accompanied by worsening of the other; the degree of clinical acceleration is marked when the 2 coexist. Activation of the sodium-hydrogen exchanger in the heart and vasculature (NHE1 isoform) and the kidneys (NHE3 isoform) may serve as a common mechanism that links both disorders and may underlie their interplay. Insulin insensitivity and adipokine abnormalities (the hallmarks of type 2 diabetes mellitus) are characteristic features of heart failure; conversely, neurohormonal systems activated in heart failure (norepinephrine, angiotensin II, aldosterone, and neprilysin) impair insulin sensitivity and contribute to microvascular disease in diabetes mellitus. Each of these neurohormonal derangements may act through increased activity of both NHE1 and NHE3. Drugs used to treat diabetes mellitus may favorably affect the pathophysiological mechanisms of heart failure by inhibiting either or both NHE isoforms, and drugs used to treat heart failure may have beneficial effects on glucose tolerance and the complications of diabetes mellitus by interfering with the actions of NHE1 and NHE3. The efficacy of NHE inhibitors on the risk of cardiovascular events may be enhanced when heart failure and glucose intolerance coexist and may be attenuated when drugs with NHE inhibitory actions are given concomitantly. Therefore, the sodium-hydrogen exchanger may play a central role in the interplay of diabetes mellitus and heart failure, contribute to the physiological and clinical progression of both diseases, and explain certain drug-drug and drug-disease interactions that have been reported in large-scale randomized clinical trials. © 2017 American Heart Association, Inc.

Attributions and Attitudes of Mothers and Fathers in Colombia.

PubMed

Di Giunta, Laura; Tirado, Liliana M Uribe; Márquez, Luz A Araque

2011-07-01

OBJECTIVE: The present study examined mean level similarities and differences as well as correlations between mothers' and fathers' attributions regarding successes and failures in caregiving situations and progressive versus authoritarian attitudes. DESIGN: Interviews were conducted with both mothers and fathers in 108 Colombian families. RESULTS: Fathers reported higher uncontrollable success attributions and higher authoritarian attitudes than did mothers, whereas mothers reported higher modernity of attitudes than did fathers; only the gender differences related to parental attitudes remained significant after controlling for parents' age, education, and possible social desirability bias. Medium effect sizes were found for concordance between parents in the same family for attributions regarding uncontrollable success and progressive attitudes after controlling for parents' age, education, and possible social desirability bias. CONCLUSIONS: This work elucidates ways that parent gender relates to attributions regarding parents' success and failure in caregiving and to progressive versus authoritarian parenting attitudes in Colombia.

Attributions and Attitudes of Mothers and Fathers in Colombia

PubMed Central

Di Giunta, Laura; Tirado, Liliana M. Uribe; Márquez, Luz A. Araque

2011-01-01

SYNOPSIS Objective The present study examined mean level similarities and differences as well as correlations between mothers’ and fathers’ attributions regarding successes and failures in caregiving situations and progressive versus authoritarian attitudes. Design Interviews were conducted with both mothers and fathers in 108 Colombian families. Results Fathers reported higher uncontrollable success attributions and higher authoritarian attitudes than did mothers, whereas mothers reported higher modernity of attitudes than did fathers; only the gender differences related to parental attitudes remained significant after controlling for parents’ age, education, and possible social desirability bias. Medium effect sizes were found for concordance between parents in the same family for attributions regarding uncontrollable success and progressive attitudes after controlling for parents’ age, education, and possible social desirability bias. Conclusions This work elucidates ways that parent gender relates to attributions regarding parents’ success and failure in caregiving and to progressive versus authoritarian parenting attitudes in Colombia. PMID:21927585

Acute toxic nephropathies: clinical pathologic correlations.

PubMed

Muehrcke, R C; Volini, F I; Morris, A M; Moles, J B; Lawrence, A G

1976-01-01

Man's ever increasing exposure to numerous drugs and chemicals, which are the results of medical and industrial progress, produces a by-product of acute toxic nephropathies. These include acute toxic renal failure, drug-induced acute oliguric renal failure, acute hemorrhagic glomerulonephritis, nephrotic syndrome, tubular disturbances and potassium deficiency. In depth information is provided for the previously mentioned disorders.

Premature Ovarian Failure in French Canadian Leigh Syndrome.

PubMed

Ghaddhab, Chiraz; Morin, Charles; Brunel-Guitton, Catherine; Mitchell, Grant A; Van Vliet, Guy; Huot, Céline

2017-05-01

In all surviving girls with Leigh syndrome, French Canadian variety, a mitochondrial disease, we detected premature ovarian failure, manifested as absent or arrested breast development, lack of menarche, high follicle-stimulating hormone, a prepubertal uterus, and small ovaries. Pubertal onset and progression should be evaluated in girls with mitochondrial diseases. Copyright © 2017 Elsevier Inc. All rights reserved.

Broad modulation of tissue responses (immune activation) by celacade may favorably influence pathologic processes associated with heart failure progression.

PubMed

Torre-Amione, Guillermo; Sestier, François; Radovancevic, Branislav; Young, James

2005-06-06

Immune activation and inflammation contribute to the progression of chronic heart failure (CHF), but therapeutic approaches directed against these processes have been largely unsuccessful. This clinical study evaluated a novel, nonpharmacologic immune modulation therapy, shown experimentally to reduce inflammatory and increase anti-inflammatory cytokines. A total of 75 patients with New York Heart Association (NYHA) functional class III or IV CHF were randomized to receive either Celacade (immune modulation therapy) or placebo (n = 38 and n = 37, respectively) in a double-blind trial for 6 months, during which standard therapy for CHF was maintained. Patients were evaluated using the 6-minute walk test, changes in NYHA class, cardiac function, and quality-of-life assessments, and were observed for the occurrence of death and hospitalization. There was no between-treatment difference in the 6-minute walk test results, but 15 Celacade-treated patients (compared with 9 placebo-treated patients) improved NYHA classification by > or = 1 class (p = 0.140). Kaplan-Meier survival analysis showed that Celacade significantly reduced the risk of death (p = 0.022) and hospitalization (p = 0.008). Analysis of a clinical composite score demonstrated a significant between-group difference (p = 0.006). There was no difference in left ventricular ejection fraction between groups, but there was a trend toward improved quality of life favoring the Celacade-treated group (p = 0.110). These preliminary findings are consistent with the hypothesis that immune activation is important in the pathogenesis of CHF, and they establish the basis for a phase 3 trial to define the benefit of Celacade in CHF.

A pretreatment nomogram for prediction of biochemical failure after primary cryoablation of the prostate.

PubMed

Elshafei, Ahmed; Kovac, Evan; Dhar, Nivedita; Levy, David; Polascik, Thomas; Mouraviev, Vladimir; Yu, Changhong; Jones, J Stephen

2015-09-01

To create a predictive nomogram for biochemical failure following primary whole-gland cryoablation of the prostate for localized prostate cancer (LPCa). We retrospectively analyzed 2,242 patients from the Cryo On-Line Database (COLD) who were treatment naive and had undergone primary whole gland cryoablation of the prostate for biopsy-confirmed LPCa. Kaplan-Meier (KM) curves estimating 5 year biochemical progression-free survival (bPFS) were generated. Multivariable Cox proportional hazards analysis (CoxPH) was performed in order to construct the nomogram. The nomogram was internally validated using the bootstrap technique. Overall, the KM estimated 5 year bPFS was 72.8%. Stratified by D'Amico risk, The KM estimated 5 year bPFS was 82.6%, 71.1%, and 57.8% for low-, intermediate-, and high-risk groups, respectively. Statistically significant predictors of biochemical outcomes from CoxPH analysis were pre-treatment prostate specific antigen (PTPSA) (P < 0.001), total prostate volume (P = 0.004), clinical stage (P = 0.034), and Gleason score (0.004). A nomogram for predicted 5 year biochemical progression free probability was constructed with a concordance index of 0.652. An online risk calculator was also generated. To the best of our knowledge, this is the first predictive nomogram for biochemical outcomes after primary whole gland cryoablation of the prostate using socio-demographic, pretreatment, clinical, and prostate biopsy data. Our nomogram and online risk calculator can guide both patients and urologists for shared decision making regarding definitive treatment options. © 2015 Wiley Periodicals, Inc.

Image guided radiation therapy may result in improved local control in locally advanced lung cancer patients.

PubMed

Kilburn, Jeremy M; Soike, Michael H; Lucas, John T; Ayala-Peacock, Diandra; Blackstock, William; Isom, Scott; Kearns, William T; Hinson, William H; Miller, Antonius A; Petty, William J; Munley, Michael T; Urbanic, James J

2016-01-01

Image guided radiation therapy (IGRT) is designed to ensure accurate and precise targeting, but whether improved clinical outcomes result is unknown. A retrospective comparison of locally advanced lung cancer patients treated with and without IGRT from 2001 to 2012 was conducted. Median local failure-free survival (LFFS), regional, locoregional failure-free survival (LRFFS), distant failure-free survival, progression-free survival, and overall survival (OS) were estimated. Univariate and multivariate models assessed the association between patient- and treatment-related covariates and local failure. A total of 169 patients were treated with definitive radiation therapy and concurrent chemotherapy with a median follow-up of 48 months in the IGRT cohort and 96 months in the non-IGRT cohort. IGRT was used in 36% (62 patients) of patients. OS was similar between cohorts (2-year OS, 47% vs 49%, P = .63). The IGRT cohort had improved 2-year LFFS (80% vs 64%, P = .013) and LRFFS (75% and 62%, P = .04). Univariate analysis revealed IGRT and treatment year improved LFFS, whereas group stage, dose, and positron emission tomography/computed tomography planning had no impact. IGRT remained significant in the multivariate model with an adjusted hazard ratio of 0.40 (P = .01). Distant failure-free survival (58% vs 59%, P = .67) did not differ significantly. IGRT with daily cone beam computed tomography confers an improvement in the therapeutic ratio relative to patients treated without this technology. Copyright © 2015 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

Correlation between inner strength and health-promoting behaviors in women with heart failure.

PubMed

Hosseini, Meimanat; Vasli, Parvaneh; Rashidi, Sakineh; Shahsavari, Soodeh

2016-08-01

Inner strength is a factor for mental health and well-being and, consequently, a dynamic component of holistic healing. Health-promoting behaviors are appropriate activities to improve health status and prevent the progression of the functional defect resulting from heart failure. The present study aimed to determine the correlation between inner strength and health-promoting behaviors in women with heart failure referred to hospitals affiliated with Shahid Beheshti University of Medical Sciences (SBMU) in 2013. In this cross-sectional study, 145 women with hearth failure were selected through convenient sampling from the clients referred to hospitals affiliated with SBMU. The data collection tool included a three-section questionnaire of personal characteristics, inner strength, and health-promoting life profile II (HPLP II). The data analysis used descriptive statistical tests and Pearson correlation coefficient through SPSS version 20. A direct significant correlation was found between inner strength and all dimensions of health-promoting behaviors and overall health-promoting behaviors (p=0.000) as well as between all dimensions of inner strength (except for the dimension of knowing and searching with physical activity and the dimension of connectedness with personal accountability in healthcare as well as connectedness with physical activity) with health-promoting behaviors (p=0.000 to p=0008). To improve the level of health and well-being and reduce the costs of care services in women with health failure, close attention should be paid to developing and empowering their inner strength.

Assessment of compressive failure process of cortical bone materials using damage-based model.

PubMed

Ng, Theng Pin; R Koloor, S S; Djuansjah, J R P; Abdul Kadir, M R

2017-02-01

The main failure factors of cortical bone are aging or osteoporosis, accident and high energy trauma or physiological activities. However, the mechanism of damage evolution coupled with yield criterion is considered as one of the unclear subjects in failure analysis of cortical bone materials. Therefore, this study attempts to assess the structural response and progressive failure process of cortical bone using a brittle damaged plasticity model. For this reason, several compressive tests are performed on cortical bone specimens made of bovine femur, in order to obtain the structural response and mechanical properties of the material. Complementary finite element (FE) model of the sample and test is prepared to simulate the elastic-to-damage behavior of the cortical bone using the brittle damaged plasticity model. The FE model is validated in a comparative method using the predicted and measured structural response as load-compressive displacement through simulation and experiment. FE results indicated that the compressive damage initiated and propagated at central region where maximum equivalent plastic strain is computed, which coincided with the degradation of structural compressive stiffness followed by a vast amount of strain energy dissipation. The parameter of compressive damage rate, which is a function dependent on damage parameter and the plastic strain is examined for different rates. Results show that considering a similar rate to the initial slope of the damage parameter in the experiment would give a better sense for prediction of compressive failure. Copyright © 2016 Elsevier Ltd. All rights reserved.

Impact analysis of natural fiber and synthetic fiber reinforced polymer composite

NASA Astrophysics Data System (ADS)

Sangamesh, Ravishankar, K. S.; Kulkarni, S. M.

2018-05-01

Impact analysis of the composite structure is essential for many fields like automotive, aerospace and naval structure which practically difficult to characterize. In the present study impact analysis of carbon-epoxy (CE) and jute-epoxy (JE) laminates were studied for three different thicknesses. The 3D finite element model was adopted to study the impact forces experienced, energy absorption and fracture behavior of the laminated composites. These laminated composites modeled as a 3D deformable solid element and an impactor at a constant velocity were modeled as a discrete rigid element. The energy absorption and fracture behaviors for various material combinations and thickness were studied. The fracture behavior of these composite showed progressive damage with matrix failure at the initial stage followed by complete fiber breakage.

Failure analysis of woven and braided fabric reinforced composites

NASA Technical Reports Server (NTRS)

Naik, Rajiv A.

1994-01-01

A general purpose micromechanics analysis that discretely models the yarn architecture within the textile repeating unit cell was developed to predict overall, three dimensional, thermal and mechanical properties, damage initiation and progression, and strength. This analytical technique was implemented in a user-friendly, personal computer-based, menu-driven code called Textile Composite Analysis for Design (TEXCAD). TEXCAD was used to analyze plain weave and 2x2, 2-D triaxial braided composites. The calculated tension, compression, and shear strengths correlated well with available test data for both woven and braided composites. Parametric studies were performed on both woven and braided architectures to investigate the effects of parameters such as yarn size, yarn spacing, yarn crimp, braid angle, and overall fiber volume fraction on the strength properties of the textile composite.

Computational Simulation of Damage Progression of Composite Thin Shells Subjected to Mechanical Loads

NASA Technical Reports Server (NTRS)

Gotsis, P. K.; Chamis, C. C.; Minnetyan, L.

1996-01-01

Defect-free and defected composite thin shells with ply orientation (90/0/+/-75) made of graphite/epoxy are simulated for damage progression and fracture due to internal pressure and axial loading. The thin shells have a cylindrical geometry with one end fixed and the other free. The applied load consists of an internal pressure in conjunction with an axial load at the free end, the cure temperature was 177 C (350 F) and the operational temperature was 21 C (70 F). The residual stresses due to the processing are taken into account. Shells with defect and without defects were examined by using CODSTRAN an integrated computer code that couples composite mechanics, finite element and account for all possible failure modes inherent in composites. CODSTRAN traces damage initiation, growth, accumulation, damage propagation and the final fracture of the structure. The results show that damage initiation started with matrix failure while damage/fracture progression occurred due to additional matrix failure and fiber fracture. The burst pressure of the (90/0/+/- 75) defected shell was 0.092% of that of the free defect. Finally the results of the damage progression of the (90/0/+/- 75), defective composite shell was compared with the (90/0/+/- theta, where theta = 45 and 60, layup configurations. It was shown that the examined laminate (90/0/+/- 75) has the least damage tolerant of the two compared defective shells with the (90/0/+/- theta), theta = 45 and 60 laminates.

Thrombospondin-1 deficiency causes a shift from fibroproliferative to inflammatory kidney disease and delays onset of renal failure.

PubMed

Zeisberg, Michael; Tampe, Björn; LeBleu, Valerie; Tampe, Desiree; Zeisberg, Elisabeth M; Kalluri, Raghu

2014-10-01

Thrombospondin-1 (TSP1) is a multifunctional matricellular protein known to promote progression of chronic kidney disease. To gain insight into the underlying mechanisms through which TSP1 accelerates chronic kidney disease, we compared disease progression in Col4a3 knockout (KO) mice, which develop spontaneous kidney failure, with that of Col4a3;Tsp1 double-knockout (DKO) mice. Decline of excretory renal function was significantly delayed in the absence of TSP1. Although Col4a3;Tsp1 DKO mice did progress toward end-stage renal failure, their kidneys exhibited distinct histopathological lesions, compared with creatinine level-matched Col4a3 KO mice. Although kidneys of both Col4a3 KO and Col4a3;Tsp1 DKO mice exhibited a widened tubulointerstitium, predominant lesions in Col4a3 KO kidneys were collagen deposition and fibroblast accumulation, whereas in Col4a3;Tsp1 DKO kidney inflammation was predominant, with less collagen deposition. Altered disease progression correlated with impaired activation of transforming growth factor-β1 (TGF-β1) in vivo and in vitro in the absence of TSP1. In summary, our findings suggest that TSP1 contributes to progression of chronic kidney disease by catalyzing activation of latent TGF-β1, resulting in promotion of a fibroproliferative response over an inflammatory response. Furthermore, the findings suggest that fibroproliferative and inflammatory lesions are independent entities, both of which contribute to decline of renal function. Copyright © 2014 American Society for Investigative Pathology. Published by Elsevier Inc. All rights reserved.

Gear wear monitoring by modulation signal bispectrum based on motor current signal analysis

NASA Astrophysics Data System (ADS)

Zhang, Ruiliang; Gu, Fengshou; Mansaf, Haram; Wang, Tie; Ball, Andrew D.

2017-09-01

Gears are important mechanical components for power transmissions. Tooth wear is one of the most common failure modes, which can present throughout a gear's lifetime. It is significant to accurately monitor gear wear progression in order to take timely predictive maintenances. Motor current signature analysis (MCSA) is an effective and non-intrusive approach which is able to monitor faults from both electrical and mechanical systems. However, little research has been reported in monitoring the gear wear and estimating its severity based on MCSA. This paper presents a novel gear wear monitoring method through a modulation signal bispectrum based motor current signal analysis (MSB-MCSA). For a steady gear transmission, it is inevitable to exist load and speed oscillations due to various errors including wears. These oscillations can induce small modulations in the current signals of the driving motor. MSB is particularly effective in characterising such small modulation signals. Based on these understandings, the monitoring process was implemented based on the current signals from a run-to-failure test of an industrial two stages helical gearbox under a moderate accelerated fatigue process. At the initial operation of the test, MSB analysis results showed that the peak values at the bifrequencies of gear rotations and the power supply can be effective monitoring features for identifying faulty gears and wear severity as they exhibit agreeable changes with gear loads. A monotonically increasing trend established by these features allows a clear indication of the gear wear progression. The dismantle inspection at 477 h of operation, made when one of the monitored features is about 123% higher than its baseline, has found that there are severe scuffing wear marks on a number of tooth surfaces on the driving gear, showing that the gear endures a gradual wear process during its long test operation. Therefore, it is affirmed that the MSB-MSCA approach proposed is reliable and accurate for monitoring gear wear deterioration.

A perspective on diuretic resistance in chronic congestive heart failure

PubMed Central

Shah, Niel; Madanieh, Raef; Alkan, Mehmet; Dogar, Muhammad U.; Kosmas, Constantine E.; Vittorio, Timothy J.

2017-01-01

Chronic congestive heart failure (CHF) is a complex disorder characterized by inability of the heart to keep up the demands on it, followed by the progressive pump failure and fluid accumulation. Although the loop diuretics are widely used in heart failure (HF) patients, both pharmacodynamic and pharmacokinetic alterations are thought to be responsible for diuretic resistance in these patients. Strategies to overcome diuretic resistance include sodium intake restriction, changes in diuretic dose and route of administration and sequential nephron diuretic therapy. In this review, we discuss the definition, prevalence, mechanism of development and management strategies of diuretic resistance in HF patients. PMID:28728476

Hemodynamic changes during weaning: can we assess and predict cardiac-related weaning failure by transthoracic echocardiography?

PubMed Central

2010-01-01

Cardiac-related failure of weaning from mechanical ventilation is an important reason for prolonged mechanical ventilation, intensive care unit treatment, and increased morbidity and mortality. When transthoracic echocardiography (TTE) is routinely performed before a weaning trial, patients at high risk of cardiac-related failure can be detected by low left ventricular (LV) ejection fraction, diastolic dysfunction, and elevated LV filling pressure. During the weaning trial, a further increase of LV filling pressure and progression of diastolic failure can be observed by repeated TTE. Owing to certain limitations concerning patients and methodology, TTE cannot be employed in every patient and invasive hemodynamic monitoring is still mandatory in selected patients with repetitive weaning failure. PMID:20619005

Hemodynamic changes during weaning: can we assess and predict cardiac-related weaning failure by transthoracic echocardiography?

PubMed

Voga, Gorazd

2010-01-01

Cardiac-related failure of weaning from mechanical ventilation is an important reason for prolonged mechanical ventilation, intensive care unit treatment, and increased morbidity and mortality. When transthoracic echocardiography (TTE) is routinely performed before a weaning trial, patients at high risk of cardiac-related failure can be detected by low left ventricular (LV) ejection fraction, diastolic dysfunction, and elevated LV filling pressure. During the weaning trial, a further increase of LV filling pressure and progression of diastolic failure can be observed by repeated TTE. Owing to certain limitations concerning patients and methodology, TTE cannot be employed in every patient and invasive hemodynamic monitoring is still mandatory in selected patients with repetitive weaning failure.

Concurrent Androgen Deprivation Therapy During Salvage Prostate Radiotherapy Improves Treatment Outcomes in High-Risk Patients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soto, Daniel E., E-mail: dsoto2@partners.org; Passarelli, Michael N.; Daignault, Stephanie

2012-03-01

Purpose: To determine whether concurrent androgen deprivation therapy (ADT) during salvage radiotherapy (RT) improves prostate cancer treatment outcomes. Methods and Materials: A total of 630 postprostatectomy patients were retrospectively identified who were treated with three-dimensional conformal RT. Of these, 441 were found to be treated for salvage indications. Biochemical failure was defined as prostate-specific antigen (PSA) of 0.2 ng/mL or greater above nadir with another PSA increase or the initiation of salvage ADT. Progression-free survival (PFS) was defined as the absence of biochemical failure, continued PSA rise despite salvage therapy, initiation of systemic therapy, clinical progression, or distant failure. Multivariate-adjustedmore » Cox proportional hazards modeling was performed to determine which factors predict PFS. Results: Low-, intermediate-, and high-risk patients made up 10%, 24%, and 66% of patients, respectively. The mean RT dose was 68 Gy. Twenty-four percent of patients received concurrent ADT (cADT). Regional pelvic nodes were treated in 16% of patients. With a median follow-up of 3 years, the 3-year PFS was 4.0 years for cADT vs. 3.4 years for cADT patients (p = 0.22). Multivariate analysis showed that concurrent ADT (p = 0.05), Gleason score (p < 0.001), and pre-RT PSA (p = 0.03) were independent predictors of PFS. When patients were stratified by risk group, the benefits of cADT (hazard ratio, 0.65; p = 0.046) were significant only for high-risk patients. Conclusions: This retrospective study showed a PFS benefit of concurrent ADT during salvage prostate RT. This benefit was observed only in high-risk patients.« less

Enhanced Schapery Theory Software Development for Modeling Failure of Fiber-Reinforced Laminates

NASA Technical Reports Server (NTRS)

Pineda, Evan J.; Waas, Anthony M.

2013-01-01

Progressive damage and failure analysis (PDFA) tools are needed to predict the nonlinear response of advanced fiber-reinforced composite structures. Predictive tools should incorporate the underlying physics of the damage and failure mechanisms observed in the composite, and should utilize as few input parameters as possible. The purpose of the Enhanced Schapery Theory (EST) was to create a PDFA tool that operates in conjunction with a commercially available finite element (FE) code (Abaqus). The tool captures the physics of the damage and failure mechanisms that result in the nonlinear behavior of the material, and the failure methodology employed yields numerical results that are relatively insensitive to changes in the FE mesh. The EST code is written in Fortran and compiled into a static library that is linked to Abaqus. A Fortran Abaqus UMAT material subroutine is used to facilitate the communication between Abaqus and EST. A clear distinction between damage and failure is imposed. Damage mechanisms result in pre-peak nonlinearity in the stress strain curve. Four internal state variables (ISVs) are utilized to control the damage and failure degradation. All damage is said to result from matrix microdamage, and a single ISV marks the micro-damage evolution as it is used to degrade the transverse and shear moduli of the lamina using a set of experimentally obtainable matrix microdamage functions. Three separate failure ISVs are used to incorporate failure due to fiber breakage, mode I matrix cracking, and mode II matrix cracking. Failure initiation is determined using a failure criterion, and the evolution of these ISVs is controlled by a set of traction-separation laws. The traction separation laws are postulated such that the area under the curves is equal to the fracture toughness of the material associated with the corresponding failure mechanism. A characteristic finite element length is used to transform the traction-separation laws into stress-strain laws. The ISV evolution equations are derived in a thermodynamically consistent manner by invoking the stationary principle on the total work of the system with respect to each ISV. A novel feature is the inclusion of both pre-peak damage and appropriately scaled, post-peak strain softening failure. Also, the characteristic elements used in the failure degradation scheme are calculated using the element nodal coordinates, rather than simply the square root of the area of the element.

Kotov in SM during Progress 37P Docking

NASA Image and Video Library

2010-05-01

ISS023-E-031743 (1 May 2010) --- Russian cosmonaut Oleg Kotov, Expedition 23 commander, is pictured at the manual TORU docking system controls in the Zvezda Service Module of the International Space Station just before conducting a manual control docking of the Progress 37 due to a jet failure on the Progress that forced a shutdown of the Kurs automated rendezvous system. Progress 37 docked to the Pirs Docking Compartment at 2:30 p.m. (EDT) on May 1, 2010, after a three-day flight from the Baikonur Cosmodrome in Kazakhstan.

Outcomes and prognostic factors for squamous cell carcinoma of the oral tongue in young adults: a single-institution case-matched analysis.

PubMed

Blanchard, Pierre; Belkhir, Farid; Temam, Stéphane; El Khoury, Clément; De Felice, Francesca; Casiraghi, Odile; Patrikidou, Anna; Mirghani, Haitham; Levy, Antonin; Even, Caroline; Gorphe, Philippe; Nguyen, France; Janot, François; Tao, Yungan

2017-03-01

There is controversy regarding prognosis and treatment of young patients with oral cavity cancer compared to their older counterparts. We conducted a retrospective case-matched analysis of all adult patients younger than 40 years and treated at our institution for a squamous cell carcinoma of the oral cavity. Only non-metastatic adult patients (age >18) with oral tongue cancer were eventually included and matched 1:1 with patients over 40 years of age, at least 20 years older than the cases, with same T and N category and treatment period. Sixty-three patients younger than 40 had an oral cavity squamous cell cancer out of which 57 had an oral tongue primary during the period 1999-2012, and 50 could be matched with an older control. No difference could be seen between younger and older patients with regard to overall, cancer-specific, or progression-free survival. The patterns of failure were similar, although in young patients, almost all failures occurred during the first 2 years following treatment. Although overall survival shows a trend toward lower survival in older patients, cancer-specific survival and analysis of pattern failure suggest that disease prognosis is similar between young and older adults with oral tongue cancer. Further work is needed to identify the younger patients with poorer prognosis who overwhelmingly fail during the first year after treatment and could benefit from treatment intensification. Until then, young adults ought to be treated using standard guidelines.

A comparative analysis of the results from 4 trials of beta-blocker therapy for heart failure: BEST, CIBIS-II, MERIT-HF, and COPERNICUS.

PubMed

Domanski, Michael J; Krause-Steinrauf, Heidi; Massie, Barry M; Deedwania, Prakash; Follmann, Dean; Kovar, David; Murray, David; Oren, Ron; Rosenberg, Yves; Young, James; Zile, Michael; Eichhorn, Eric

2003-10-01

Recent large randomized, controlled trials (BEST [Beta-blocker Evaluation of Survival Trial], CIBIS-II [Cardiac Insufficiency Bisoprolol Trial II], COPERNICUS [Carvedilol Prospective Randomized Cumulative Survival Study], and MERIT-HF [Metoprolol Randomized Intervention Trial in Congestive Heart Failure]) have addressed the usefulness of beta-blockade in the treatment of advanced heart failure. CIBIS-II, COPERNICUS, and MERIT-HF have shown that beta-blocker treatment with bisoprolol, carvedilol, and metoprolol XL, respectively, reduce mortality in advanced heart failure patients, whereas BEST found a statistically nonsignificant trend toward reduced mortality with bucindolol. We conducted a post hoc analysis to determine whether the response to beta-blockade in BEST could be related to differences in the clinical and demographic characteristics of the study populations. We generated a sample from BEST to resemble the patient cohorts studied in CIBIS-II and MERIT-HF to find out whether the response to beta-blocker therapy was similar to that reported in the other trials. These findings are further compared with COPERNICUS, which entered patients with more severe heart failure. To achieve conformity with the entry criteria for CIBIS-II and MERIT-HF, the BEST study population was adjusted to exclude patients with systolic blood pressure <100 mm Hg, heart rate <60 bpm, and age >80 years (exclusion criteria employed in those trials). The BEST comparison subgroup (BCG) was further modified to more closely reflect the racial demographics reported for patients enrolled in CIBIS-II and MERIT-HF. The association of beta-blocker therapy with overall survival and survival free of cardiac death, sudden cardiac death, and progressive pump failure in the BCG was assessed. In the BCG subgroup, bucindolol treatment was associated with significantly lower risk of death from all causes (hazard ratio (HR)=0.77 [95% CI=0.65, 0.92]), cardiovascular death (HR=0.71 [0.58, 0.86]), sudden death (HR=0.77 [0.59, 0.999]), and pump failure death (HR=0.64 [0.45, 0.91]). Although not excluding the possibility of differences resulting from chance alone or to different properties among beta-blockers, this study suggests the possibility that different heart failure population subgroups may have different responses to beta-blocker therapy.

Progressive Derechos in the Presence of Closed Upper-level Subtropical Anticyclones

NASA Astrophysics Data System (ADS)

Guastini, C.; Bosart, L. F.

2013-12-01

Progressive derechos are a type of long-lived mesoscale convective system that produces large swaths of wind damage. In contrast to their serial derecho counterparts, which form in association with extratropical cyclones, progressive derechos often occur in the presence of benign synoptic conditions on the poleward side of closed upper-level subtropical anticyclones. Forecasters have been known to struggle predicting progressive derechos with any certainty due to the common lack of large-scale support for severe weather in regimes dominated by anticyclonic conditions. This study will classify a group of days on which there was a closed upper-level anticyclone over the United States and a progressive derecho did not occur and a group of days on which there was a closed upper-level anticyclone over the United States and a progressive derecho did occur, examine the synoptic environments of the two groups, and identify derecho null cases. By analyzing the null cases, derecho failure modes will be determined, which will help forecaster situational awareness and reveal the science behind the environmental conditions necessary for, and detrimental to, derecho development. This presentation will include climatologies of both derechos and closed upper-level anticyclones over the United States for June, July, and August of the years 1994-2013 (the modern radar era). The presentation will also include closed anticyclone-relative composites of both derecho cases and derecho null cases. The composites will elucidate which conditions are necessary for, and which are detrimental to, derecho development. The hypothesis is that derecho failure days occur due either to the lack of a triggering mechanism or other phenomena working against convective development such as a strong capping inversion or transverse ageostrophic circulations around an upper-level jet creating subsidence in an otherwise favorable environment. A representative case study will be included to highlight a common derecho failure mode.

Investigation of damage mechanisms in a cross-ply metal-matrix composite under thermomechanical loading. Master's thesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schubbe, J.J.

1990-12-01

Metal matrix composites (MMCs) are rapidly becoming strong candidates for high temperature and high stiffness structural applications such as the Advanced Tactical Fighter (ATF). This study systematically investigated the failure modes and associated damage in a cross-ply, (0/90)2s SCS6/Ti-15-3 metal matrix composite under in-phase and out-of-phase thermomechanic fatigue. Initiation and progression of fatigue damage were recorded and correlated to changes in Young's Modulus of the composite material. Experimental results show an internal stabilization of reaction zone size but degradation and separation from constituent materials under extended cyclic thermal loading. Critical to damage were transverse cracks initiating in the 90 degreesmore » plies, growing and coalescing from fiber/matrix interfaces internal to the specimen, progressing outward through the 0 degree plies before failure. Maximum mechanical strain at failure was determined to be approximately 0.0075 mm/mm. A correlation was made relating maximum matrix stress to failure life, resulting in a fatigue threshold limit of 280 MPa. An attempt was made to correlate the degradation in Young's Modulus (Damage=1-E/Eo) with the applied life cycles from different TMF tests.« less

Relationship between respiratory failure and plasma noradrenaline levels in amyotrophic lateral sclerosis.

PubMed

Yamashita, A; Koike, Y; Takahashi, A; Hirayama, M; Murakami, N; Sobue, G

1997-08-01

We evaluated plasma noradrenaline (NA) levels at test and during head-up tilt test in 20 patients with sporadic amyotrophic lateral sclerosis (ALS). Their fasting plasma NA levels ranged from 195 to 4227 pg/ml. The average plasma NA level was 483 pg/ml in five ambulatory patients, 341 in two wheelchair-bound patients, 1264 in 11 bedridden patients, and 208 in two respirator-dependent patients whose disability grading was the worst among the four groups. Arterial carbon dioxide (PCO2) was evaluated as a measure of respiratory function. The coefficient of correlation between PCO2 and plasma NA was r = 0.654 (p < 0.01). Either respiratory failure or lower motor neuron dysfunction may relate to the elevation of plasma NA levels. In the two bedridden patients, plasma NA levels and heart rate at rest increased significantly as the disease progressed. Cardiovascular responses to head-up tilting were normal. These data suggest that the elevation of plasma NA levels may be related to progression of respiratory failure and lower motor neuron dysfunction. In conclusion, sympathetic hyperactivity in ALS is considered to be not primary, but secondary to somatic motor disabilities and respiratory failure.

Serum antibody-negative Goodpasture syndrome with delta granule pool storage deficiency and eosinophilia.

PubMed

Kussman, Ashleigh; Gohara, Amira

2012-12-01

Goodpasture syndrome is a rare, life-threatening autoimmune disease characterized by a triad of rapidly progressive glomerulonephritis, a hemorrhagic pulmonary condition and the presence of anti-glomerular basement membrane (anti-GBM) antibodies. The antibodies initiate destruction of the kidney glomeruli, resulting in a focal necrotizing glomerulitis, which may progress rapidly to renal failure. Autoantibody-mediated damage of alveolar basement membranes leads to diffuse pulmonary hemorrhage, which in some cases may be severe enough to cause respiratory failure. Many clinicians use a variety of assays to detect serum anti-GBM antibodies; however, these tests may be falsely negative in up to 15% of patients with Goodpasture syndrome. Here, we report an unusual case of a 40-year-old man with clinical evidence of Goodpasture syndrome, a negative anti-GBM antibody serum result, eosinophilia and delta granule pool storage deficiency. After a 14-day hospital stay and extensive workup, as well as treatment with antibiotics, steroids and ventilator support for respiratory failure, the patient continued to deteriorate and entered multisystem organ failure. The family decided to withdraw ventilator support, and the patient expired. Immunofluorescence testing for anti-GBM autoantibodies on lung and kidney tissues during an autopsy confirmed the diagnosis of Goodpasture syndrome.

Predicting Renal Failure Progression in Chronic Kidney Disease Using Integrated Intelligent Fuzzy Expert System.

PubMed

Norouzi, Jamshid; Yadollahpour, Ali; Mirbagheri, Seyed Ahmad; Mazdeh, Mitra Mahdavi; Hosseini, Seyed Ahmad

2016-01-01

Chronic kidney disease (CKD) is a covert disease. Accurate prediction of CKD progression over time is necessary for reducing its costs and mortality rates. The present study proposes an adaptive neurofuzzy inference system (ANFIS) for predicting the renal failure timeframe of CKD based on real clinical data. This study used 10-year clinical records of newly diagnosed CKD patients. The threshold value of 15 cc/kg/min/1.73 m(2) of glomerular filtration rate (GFR) was used as the marker of renal failure. A Takagi-Sugeno type ANFIS model was used to predict GFR values. Variables of age, sex, weight, underlying diseases, diastolic blood pressure, creatinine, calcium, phosphorus, uric acid, and GFR were initially selected for the predicting model. Weight, diastolic blood pressure, diabetes mellitus as underlying disease, and current GFR(t) showed significant correlation with GFRs and were selected as the inputs of model. The comparisons of the predicted values with the real data showed that the ANFIS model could accurately estimate GFR variations in all sequential periods (Normalized Mean Absolute Error lower than 5%). Despite the high uncertainties of human body and dynamic nature of CKD progression, our model can accurately predict the GFR variations at long future periods.

Renal failure and concurrent RAAS blockade in older CKD patients with renal artery stenosis: an extended Mayo Clinic prospective 63-month experience.

PubMed

Onuigbo, Macaulay A C; Onuigbo, Nnonyelum T C

2008-01-01

Concerns have been raised regarding a possible link between the increasing utilization of RAAS blocking strategies in the United States and the increasing ESRD epidemic. Most reports of accelerated renal failure in CKD patients with renal artery stenosis on RAAS blockade are retrospective. We hypothesized that this syndrome is therefore poorly understood, may be under-recognized, and demanded prospective analysis. As part of a larger cohort of 100 CKD patients on RAAS blockade presenting with worsening renal failure (>25% increased serum creatinine from baseline) while concurrently on an ACE inhibitor and/or an angiotensin receptor blocker, 26 patients (26%) enrolled between September 2002 and February 2005 had hemodynamically significant renal artery stenosis. RAAS blockade was discontinued, standard nephrology care applied, and eGFR by MDRD monitored. They consisted of 26 Caucasian patients, M:F = 10:16, age 75.3 +/- 6.4 (63-87) years. Mean follow-up was 26.4 +/- 16.4 (1-49) months. Duration of RAAS blockade prior to enrollment was 20.2 +/- 16.4 (0.5-48) months. Contrary to previous reports, precipitating factors were often absent (15/26), unilateral RAS lesions in patients with dual kidneys was common (19/26), and progression to ESRD was frequent (5/26). Four-fifths of the ESRD patients were dead after 5.5 +/- 4.1 (1-11) months. A fifth patient with improved eGFR died after 14 months from metastatic gastric cancer. Excluding five patients who progressed to ESRD and two patients lost early to follow-up, in 19 patients, eGFR increased from 27.8 +/- 9.5 (11-47) to 36.7 +/- 16 (14-68) mL/min/1.73 m(2) BSA (p = 0.014) after 34.8 +/- 10.1 (14-49) months of follow-up. This improvement in eGFR was evident after weeks to months of stopping RAAS blockade in these patients with and without renal PTA and stenting. Nevertheless, renal PTA/stenting further improved eGFR in selected patients. We conclude that renal failure/ESRD associated with concurrent RAAS blockade in older CKD patients with renal stenosis remains poorly understood and mostly unrecognized. Unilateral lesions in patients with dual kidneys, absent precipitating factors, and progression to ESRD with high mortality, despite discontinuation of RAAS blockade, are more common than previously thought. Lower baseline eGFR (<35) predicted ESRD. Our findings call for a larger prospective study, especially given growing concerns of iatrogenic renal failure from RAAS blockade in the aging U.S. population. An aging U.S. population further raises the probability of the presence of increasing and unrecognized renal artery stenosis in our CKD patient population.

Engineering risk assessment for emergency disposal projects of sudden water pollution incidents.

PubMed

Shi, Bin; Jiang, Jiping; Liu, Rentao; Khan, Afed Ullah; Wang, Peng

2017-06-01

Without an engineering risk assessment for emergency disposal in response to sudden water pollution incidents, responders are prone to be challenged during emergency decision making. To address this gap, the concept and framework of emergency disposal engineering risks are reported in this paper. The proposed risk index system covers three stages consistent with the progress of an emergency disposal project. Fuzzy fault tree analysis (FFTA), a logical and diagrammatic method, was developed to evaluate the potential failure during the process of emergency disposal. The probability of basic events and their combination, which caused the failure of an emergency disposal project, were calculated based on the case of an emergency disposal project of an aniline pollution incident in the Zhuozhang River, Changzhi, China, in 2014. The critical events that can cause the occurrence of a top event (TE) were identified according to their contribution. Finally, advices on how to take measures using limited resources to prevent the failure of a TE are given according to the quantified results of risk magnitude. The proposed approach could be a potential useful safeguard for the implementation of an emergency disposal project during the process of emergency response.

Multiscale processing of loss of metal: a machine learning approach

NASA Astrophysics Data System (ADS)

De Masi, G.; Gentile, M.; Vichi, R.; Bruschi, R.; Gabetta, G.

2017-07-01

Corrosion is one of the principal causes of degradation to failure of marine structures. In practice, localized corrosion is the most dangerous mode of attack and can result in serious failures, in particular in marine flowlines and inter-field lines, arousing serious concerns relatively to environmental impact. The progress in time of internal corrosion, the location along the route and across the pipe section, the development pattern and the depth of the loss of metal are a very complex issue: the most important factors are products characteristics, transport conditions over the operating lifespan, process fluid-dynamics, and pipeline geometrical configuration. Understanding which factors among them play the most important role is a key step to develop a model able to predict with enough accuracy the sections more exposed to risk of failure. Some factors play a crucial role at certain spatial scales while other factors at other scales. The Mutual Information Theory, intimately related to the concept of Shannon Entropy in Information theory, has been applied to detect the most important variables at each scale. Finally, the variables emerged from this analysis at each scale have been integrated in a predicting data driven model sensibly improving its performance.

Numerical modelling of hydrologically-driven slope instability by means of porous media mechanics

NASA Astrophysics Data System (ADS)

Kakogiannou, Evanthia; Sanavia, Lorenzo; Lora, Marco; Schrefler, Bernhard

2015-04-01

Heavy rainfall can trigger slope failure which generally involves shallow soil deposit of different grading and origin usually in a state of partial saturation. In this case of slope instability, the behaviour of the soil slope is closely related not only to the distribution of pore-water pressure but also to the stress state during rainfall infiltration involving both mechanical and hydrological processes. In order to understand better these physical key processes, in this research work, the modelling of rainfall induced slope failure is considered as a coupled variably saturated hydro-mechanical problem. Therefore, the geometrically linear finite element code Comes-Geo for non-isothermal elasto-plastic multiphase solid porous materials is used, as developed by B.A. Schrefler and his co-workers. In this context, a detailed numerical analysis of an experimental slope stability test due to rainfall infiltration is presented. The main goals of this work are to understand the triggering mechanisms during the progressive failure, the effect of using different constitutive models of the mechanical soil behavior on the numerical results and the use of the second order work criterion on the detection of slope instability.

Analysis of recent failures of disease modifying therapies in Alzheimer's disease suggesting a new methodology for future studies.

PubMed

Amanatkar, Hamid Reza; Papagiannopoulos, Bill; Grossberg, George Thomas

2017-01-01

Pharmaceutical companies and the NIH have invested heavily in a variety of potential disease-modifying therapies for Alzheimer's disease (AD) but unfortunately all double-blind placebo-controlled Phase III studies of these drugs have failed to show statistically significant results supporting their clinical efficacy on cognitive measures. These negative results are surprising as most of these medications have the capability to impact the biomarkers which are associated with progression of Alzheimer's disease. Areas covered: This contradiction prompted us to review all study phases of Intravenous Immunoglobulin (IVIG), Bapineuzumab, Solanezumab, Avagacestat and Dimebolin to shed more light on these recent failures. We critically analyzed these studies, recommending seven lessons from these failures which should not be overlooked. Expert commentary: We suggest a new methodology for future treatment research in Alzheimer's disease considering early intervention with more focus on cognitive decline as a screening tool, more sophisticated exclusion criteria with more reliance on biomarkers, stratification of subjects based on the rate of cognitive decline aiming less heterogeneity, and a longer study duration with periodic assessment of cognition and activities of daily living during the study and also after a washout period.

Stress evolution during caldera collapse

NASA Astrophysics Data System (ADS)

Holohan, E. P.; Schöpfer, M. P. J.; Walsh, J. J.

2015-07-01

The mechanics of caldera collapse are subject of long-running debate. Particular uncertainties concern how stresses around a magma reservoir relate to fracturing as the reservoir roof collapses, and how roof collapse in turn impacts upon the reservoir. We used two-dimensional Distinct Element Method models to characterise the evolution of stress around a depleting sub-surface magma body during gravity-driven collapse of its roof. These models illustrate how principal stress orientations rotate during progressive deformation so that roof fracturing transitions from initial reverse faulting to later normal faulting. They also reveal four end-member stress paths to fracture, each corresponding to a particular location within the roof. Analysis of these paths indicates that fractures associated with ultimate roof failure initiate in compression (i.e. as shear fractures). We also report on how mechanical and geometric conditions in the roof affect pre-failure unloading and post-failure reloading of the reservoir. In particular, the models show how residual friction within a failed roof could, without friction reduction mechanisms or fluid-derived counter-effects, inhibit a return to a lithostatically equilibrated pressure in the magma reservoir. Many of these findings should be transferable to other gravity-driven collapse processes, such as sinkhole formation, mine collapse and subsidence above hydrocarbon reservoirs.

Evaluation of the value of ENI in radiotherapy for cervical and upper thoracic esophageal cancer: a retrospective analysis.

PubMed

Liu, Mina; Zhao, Kuaile; Chen, Yun; Jiang, Guo-Liang

2014-10-25

A retrospective study to compare the failure patterns and effects of elective nodal irradiation (ENI) or involved field irradiation (IFI) for cervical and upper thoracic esophageal squamous cell carcinoma (SCC) patients. One hundred and sixty nine patients with the cervical and upper thoracic esophageal SCC were analyzed retrospectively; 99 patients (59%) underwent IFI and 70 patients (41%) received ENI. We defined "Out-PTVifi in-PTVeni metastasis" as lymph node metastasis occurring in the cervical prophylactic field of PTVeni thus out of PTVifi. Out-PTVifi in-PTVeni cervical node metastasis occurred in 8% of patients in the IFI group, all within 2 years after treatment. However, it occurred in 10% of patients in the ENI group, and these failures happened gradually since one year after treatments. No difference was found in OS and the incidences of Grade ≥ 3 treatment-related esophageal and lung toxicities between the two groups. ENI for cervical and upper thoracic esophageal SCC patients did not bring longer OS and better long-term control of cervical lymph nodes. Although ENI might delay cervical nodes progression in elective field; it could not decrease the incidence of these failures.