Science.gov

Sample records for prohibiting hand-held cell

  1. 78 FR 27441 - NIJ Evaluation of Hand-Held Cell Phone Detector Devices

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-10

    ... of Justice Programs NIJ Evaluation of Hand-Held Cell Phone Detector Devices AGENCY: National...) is soliciting interest in supplying hand-held cell phone detector devices for participation in an... soliciting interest in supplying hand-held cell phone detector devices for participation in an evaluation...

  2. A new hand-held microfluidic cytometer for evaluating irradiation damage by analysis of the damaged cells distribution.

    PubMed

    Wang, Junsheng; Fan, Zhiqiang; Zhao, Yile; Song, Younan; Chu, Hui; Song, Wendong; Song, Yongxin; Pan, Xinxiang; Sun, Yeqing; Li, Dongqing

    2016-01-01

    Space radiation brings uneven damages to cells. The detection of the distribution of cell damage plays a very important role in radiation medicine and the related research. In this paper, a new hand-held microfluidic flow cytometer was developed to evaluate the degree of radiation damage of cells. The device we propose overcomes the shortcomings (e.g., large volume and high cost) of commercial flow cytometers and can evaluate the radiation damage of cells accurately and quickly with potential for onsite applications. The distribution of radiation-damaged cells is analyzed by a simultaneous detection of immunofluorescence intensity of γ-H2AX and resistance pulse sensor (RPS) signal. The γ-H2AX fluorescence intensity provides information of the degree of radiation damage in cells. The ratio of the number of cells with γ-H2AX fluorescence signals to the total numbers of cells detected by RPS indicates the percentage of the cells that are damaged by radiation. The comparison experiment between the developed hand-held microfluidic flow cytometer and a commercial confocal microscope indicates a consistent and comparable detection performance. PMID:26983800

  3. A new hand-held microfluidic cytometer for evaluating irradiation damage by analysis of the damaged cells distribution

    NASA Astrophysics Data System (ADS)

    Wang, Junsheng; Fan, Zhiqiang; Zhao, Yile; Song, Younan; Chu, Hui; Song, Wendong; Song, Yongxin; Pan, Xinxiang; Sun, Yeqing; Li, Dongqing

    2016-03-01

    Space radiation brings uneven damages to cells. The detection of the distribution of cell damage plays a very important role in radiation medicine and the related research. In this paper, a new hand-held microfluidic flow cytometer was developed to evaluate the degree of radiation damage of cells. The device we propose overcomes the shortcomings (e.g., large volume and high cost) of commercial flow cytometers and can evaluate the radiation damage of cells accurately and quickly with potential for onsite applications. The distribution of radiation-damaged cells is analyzed by a simultaneous detection of immunofluorescence intensity of γ-H2AX and resistance pulse sensor (RPS) signal. The γ-H2AX fluorescence intensity provides information of the degree of radiation damage in cells. The ratio of the number of cells with γ-H2AX fluorescence signals to the total numbers of cells detected by RPS indicates the percentage of the cells that are damaged by radiation. The comparison experiment between the developed hand-held microfluidic flow cytometer and a commercial confocal microscope indicates a consistent and comparable detection performance.

  4. A new hand-held microfluidic cytometer for evaluating irradiation damage by analysis of the damaged cells distribution

    PubMed Central

    Wang, Junsheng; Fan, Zhiqiang; Zhao, Yile; Song, Younan; Chu, Hui; Song, Wendong; Song, Yongxin; Pan, Xinxiang; Sun, Yeqing; Li, Dongqing

    2016-01-01

    Space radiation brings uneven damages to cells. The detection of the distribution of cell damage plays a very important role in radiation medicine and the related research. In this paper, a new hand-held microfluidic flow cytometer was developed to evaluate the degree of radiation damage of cells. The device we propose overcomes the shortcomings (e.g., large volume and high cost) of commercial flow cytometers and can evaluate the radiation damage of cells accurately and quickly with potential for onsite applications. The distribution of radiation-damaged cells is analyzed by a simultaneous detection of immunofluorescence intensity of γ-H2AX and resistance pulse sensor (RPS) signal. The γ-H2AX fluorescence intensity provides information of the degree of radiation damage in cells. The ratio of the number of cells with γ-H2AX fluorescence signals to the total numbers of cells detected by RPS indicates the percentage of the cells that are damaged by radiation. The comparison experiment between the developed hand-held microfluidic flow cytometer and a commercial confocal microscope indicates a consistent and comparable detection performance. PMID:26983800

  5. Motorists' use of hand held cell phones in New Zealand: an observational study.

    PubMed

    Townsend, Michael

    2006-07-01

    Unlike many similar countries, New Zealand has no specific legislation restricting the use of cell phones in vehicles. Several factors suggest that legislation may be introduced in the near future. This study provided a benchmark for current cell phone use among motorists. A total of 8,700 drivers of cars were observed for cell phone use as they passed a fixed location in Auckland. Cell phone use was double that of an Australian city, where cell phones are banned. Use of a cell phone while driving was similarly likely in male and female drivers.

  6. Hand-held medical robots.

    PubMed

    Payne, Christopher J; Yang, Guang-Zhong

    2014-08-01

    Medical robots have evolved from autonomous systems to tele-operated platforms and mechanically-grounded, cooperatively-controlled robots. Whilst these approaches have seen both commercial and clinical success, uptake of these robots remains moderate because of their high cost, large physical footprint and long setup times. More recently, researchers have moved toward developing hand-held robots that are completely ungrounded and manipulated by surgeons in free space, in a similar manner to how conventional instruments are handled. These devices provide specific functions that assist the surgeon in accomplishing tasks that are otherwise challenging with manual manipulation. Hand-held robots have the advantages of being compact and easily integrated into the normal surgical workflow since there is typically little or no setup time. Hand-held devices can also have a significantly reduced cost to healthcare providers as they do not necessitate the complex, multi degree-of-freedom linkages that grounded robots require. However, the development of such devices is faced with many technical challenges, including miniaturization, cost and sterility, control stability, inertial and gravity compensation and robust instrument tracking. This review presents the emerging technical trends in hand-held medical robots and future development opportunities for promoting their wider clinical uptake.

  7. Hand held explosives detection system

    DOEpatents

    Conrad, Frank J.

    1992-01-01

    The present invention is directed to a sensitive hand-held explosives detection device capable of detecting the presence of extremely low quantities of high explosives molecules, and which is applicable to sampling vapors from personnel, baggage, cargo, etc., as part of an explosives detection system.

  8. Electric currents and fields induced in cells in the human brain by radiation from hand-held cellular telephones

    NASA Astrophysics Data System (ADS)

    King, Ronold W. P.

    2000-01-01

    After a review of recent work on the interaction of electromagnetic fields from cellular telephones with the human head, the structural and radiating properties of two common types of transceivers are determined. These include the impedance and current amplitude distribution of the antennas. The tangential electric field maintained by the antennas on the adjacent surface of the head is next determined. From this, the electric field propagating through the skull into the brain is analyzed and, from it, the electric field in spherical and long cylindrical cells is determined. It ranges from 27 to 13.5 V/m in the first 3 cm inside the skull. Of interest is the fact that the induced field in the interior of all cells, regardless of their shape, is the same as the incident field in the brain. It is hoped that biomedical scientists will review these results and determine possible biological effects.

  9. Microfluidic MEMS hand-held flow cytometer

    NASA Astrophysics Data System (ADS)

    Grafton, Meggie M. G.; Maleki, Teimour; Zordan, Michael D.; Reece, Lisa M.; Byrnes, Ron; Jones, Alan; Todd, Paul; Leary, James F.

    2011-02-01

    Due to a number of recent technological advances, a hand-held flow cytometer can be achieved by use of semiconductor illuminators, optical sensors (all battery powered) and sensitive cell markers such as immuno-quantum dot (Qdot) labels. The specific application described is of a handheld blood analyzer that can quickly process a drop of whole, unfractionated human peripheral blood by real-time, on-chip magnetic separation of white blood cells (WBCs) and red blood cells (RBCs) and further fluorescence analysis of Qdot labeled WBC subsets. Various microfluidic patterns were fabricated in PDMS and used to characterize flow of single cells and magnetic deflection of magnetically labeled cells. An LED excitation, avalanche photodiode detection system (SensL Technologies, Ltd., Cork, Ireland) was used for immuno-Qdot detection of WBC subsets. A static optical setup was used to determine the sensitivity of the detection system. In this work we demonstrate: valve-less, on-chip magnetic sorting of immunomagnetically labeled white blood cells, bright Qdot labeling of lymphocytes, and counting of labeled white blood cells. Comparisons of these results with conventional flow cytometric analyses are reported. Sample preparation efficiency was determined by labeling of isolated white blood cells. Appropriate flow rates were determined for optical detection and confirmed with flowing particles. Several enabling technologies required for a truly portable, battery powered, hand-held flow cytometer for use in future point-of-care diagnostic devices have been demonstrated. The combining of these technologies into an integrated handheld instrument is in progress and results on whole blood cell analysis are to be reported in another paper.

  10. Choosing a Hand-Held Inventory Device

    ERIC Educational Resources Information Center

    Green, Lois; Hughes, Janet; Neff, Verne; Notartomas, Trish

    2008-01-01

    In spring of 2006, a task force was charged to look at the feasibility of acquiring hand-held inventory devices for the Pennsylvania State University Libraries (PSUL). The task force's charge was not to look at the whole concept of doing an inventory, but rather to focus on the feasibility of acquiring hand-held devices to use in an inventory.…

  11. Hand-held multiple system gas chromatograph

    DOEpatents

    Yu, Conrad M.

    2001-01-01

    A multiple parallel hand-held gas chromatograph (GC) system which includes several independent GCs. Each independent GC has its own injector, separation column, detector and oven and the GCs are mounted in a light weight hand-held assembly. Each GC operates independently and simultaneously. Because of different coatings in different separation columns, different retention times for the same gas will be measured. Thus, for a GC system with multiple parallel GCs, the system can measure, in a short period, different retention times and provide a cross-reference in the determination of the measured gas and to become a two-dimensional system for direct field use.

  12. Hand-held computer improves line inspection

    SciTech Connect

    Lyons, P.

    1998-01-01

    A new computer-based tool for transmission line inspection, maintenance and data management is quickly winning favor in the field with line managers, supervisors, and most importantly, with patrolmen and inspectors. The Transmission Inspection and Maintenance (TIM) system, developed by the Electric Power Research Institute, allows transmission line personnel to create and store detailed data and graphic images of transmission lines, structures and components in a central, office computer program. The system consists of an integrated 486-based microprocessor hand-held computer, digital camera and office PC server. This setup facilitates easy long-term storage, manipulation and assessment of the inspection database in a portable package.

  13. Digital hand-held temperature monitor

    NASA Astrophysics Data System (ADS)

    Allin, L. V.; Ferrari, I.

    1980-09-01

    A hand-held non-invasive monitoring instrument has been designed, constructed and tested to allow core temperature measurements to be obtained from human subjects who have swallowed a temperature-sensing radio transmitter (radio pill). This instrument uses a simple AM radio for a receiver, digital circuitry to decode the received signal and a four-digit LED module to display the temperature. The unit, which is battery-powered, can be held in one hand while an antenna probe is swept over the abdomen of the subject until a continuously audible signal is generated by a piezoelectric sound source, indicating reception. The digital display then presents the body core temperature in tenths of a degree Celsius.

  14. 30 CFR 56.7053 - Moving hand-held drills.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Moving hand-held drills. 56.7053 Section 56... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7053 Moving hand-held drills. Before hand-held drills are moved from...

  15. 30 CFR 56.7053 - Moving hand-held drills.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Moving hand-held drills. 56.7053 Section 56... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7053 Moving hand-held drills. Before hand-held drills are moved from...

  16. 30 CFR 56.7053 - Moving hand-held drills.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Moving hand-held drills. 56.7053 Section 56... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7053 Moving hand-held drills. Before hand-held drills are moved from...

  17. 30 CFR 56.7053 - Moving hand-held drills.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Moving hand-held drills. 56.7053 Section 56... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7053 Moving hand-held drills. Before hand-held drills are moved from...

  18. 30 CFR 56.7053 - Moving hand-held drills.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Moving hand-held drills. 56.7053 Section 56... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7053 Moving hand-held drills. Before hand-held drills are moved from...

  19. 30 CFR 57.12033 - Hand-held electric tools.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Hand-held electric tools. 57.12033 Section 57.12033 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Surface and Underground § 57.12033 Hand-held electric tools. Hand-held electric tools shall not...

  20. 30 CFR 57.12033 - Hand-held electric tools.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Hand-held electric tools. 57.12033 Section 57.12033 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Surface and Underground § 57.12033 Hand-held electric tools. Hand-held electric tools shall not...

  1. 30 CFR 57.12033 - Hand-held electric tools.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Hand-held electric tools. 57.12033 Section 57.12033 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Surface and Underground § 57.12033 Hand-held electric tools. Hand-held electric tools shall not...

  2. 30 CFR 56.14116 - Hand-held power tools.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Hand-held power tools. 56.14116 Section 56... Equipment Safety Devices and Maintenance Requirements § 56.14116 Hand-held power tools. (a) Power drills, disc sanders, grinders and circular and chain saws, when used in the hand-held mode shall be...

  3. 30 CFR 57.12033 - Hand-held electric tools.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Hand-held electric tools. 57.12033 Section 57.12033 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Surface and Underground § 57.12033 Hand-held electric tools. Hand-held electric tools shall not...

  4. 30 CFR 57.14116 - Hand-held power tools.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Hand-held power tools. 57.14116 Section 57... Equipment Safety Devices and Maintenance Requirements § 57.14116 Hand-held power tools. (a) Power drills, disc sanders, grinders and circular and chain saws, when used in the hand-held mode shall be...

  5. 30 CFR 56.14116 - Hand-held power tools.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Hand-held power tools. 56.14116 Section 56... Equipment Safety Devices and Maintenance Requirements § 56.14116 Hand-held power tools. (a) Power drills, disc sanders, grinders and circular and chain saws, when used in the hand-held mode shall be...

  6. 30 CFR 57.14116 - Hand-held power tools.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Hand-held power tools. 57.14116 Section 57... Equipment Safety Devices and Maintenance Requirements § 57.14116 Hand-held power tools. (a) Power drills, disc sanders, grinders and circular and chain saws, when used in the hand-held mode shall be...

  7. 30 CFR 57.12033 - Hand-held electric tools.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Hand-held electric tools. 57.12033 Section 57.12033 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Surface and Underground § 57.12033 Hand-held electric tools. Hand-held electric tools shall not...

  8. 30 CFR 57.14116 - Hand-held power tools.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Hand-held power tools. 57.14116 Section 57... Equipment Safety Devices and Maintenance Requirements § 57.14116 Hand-held power tools. (a) Power drills, disc sanders, grinders and circular and chain saws, when used in the hand-held mode shall be...

  9. 30 CFR 57.14116 - Hand-held power tools.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Hand-held power tools. 57.14116 Section 57... Equipment Safety Devices and Maintenance Requirements § 57.14116 Hand-held power tools. (a) Power drills, disc sanders, grinders and circular and chain saws, when used in the hand-held mode shall be...

  10. 30 CFR 56.14116 - Hand-held power tools.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Hand-held power tools. 56.14116 Section 56... Equipment Safety Devices and Maintenance Requirements § 56.14116 Hand-held power tools. (a) Power drills, disc sanders, grinders and circular and chain saws, when used in the hand-held mode shall be...

  11. 30 CFR 56.14116 - Hand-held power tools.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Hand-held power tools. 56.14116 Section 56... Equipment Safety Devices and Maintenance Requirements § 56.14116 Hand-held power tools. (a) Power drills, disc sanders, grinders and circular and chain saws, when used in the hand-held mode shall be...

  12. High performance hand-held gas chromatograph

    SciTech Connect

    Yu, C M; Koo, J C

    2001-01-10

    Gas chromatography is a prominent technique for separating complex gases and then analyzing the relative quantities of the separate components. This analytical technique is popular with scientists in a wide range of applications, including environmental restoration for air and water pollution, and chemical and biological analysis. Today the analytical instrumentation community is to working towards moving the analysis away from the laboratory to the point of origin of the sample (''the field'') to achieve real-time data collection and lower analysis costs. The Microtechnology Center of Lawrence Livermore National Laboratory, has developed a hand-held, real-time detection gas chromatograph (GC) through Micro-Electro-Mechanical-System (MEMS) technology. The total weight of this GC is approximately 8 pounds, and it measures 8 inches by 5 inches by 3 inches. It consumes approximately 12 watts of electrical power and has a response time on the order of 2 minutes. The current detector is a glow discharge detector with a sensitivity of parts per billion. The average retention time is about 30 to 45 seconds. Under optimum conditions, the calculated effective plate number is 40,000. The separation column in the portable GC is fabricated completely on silicon wafers. Silicon is a good thermal conductor and provides rapid heating and cooling of the column. The operational temperature can be as high as 350 degrees Celsius. The GC system is capable of rapid column temperature ramping and cooling operations. These are especially important for organic and biological analyses in the GC applications.

  13. Ultratrace detector for hand-held gas chromatography

    DOEpatents

    Andresen, Brian D.; Miller, Fred S.

    1999-01-01

    An ultratrace detector system for hand-held gas chromatography having high sensitivity, for example, to emissions generated during production of weapons, biological compounds, drugs, etc. The detector system is insensitive to water, air, helium, argon, oxygen, and C0.sub.2. The detector system is basically composed of a hand-held capillary gas chromatography (GC), an insulated heated redox-chamber, a detection chamber, and a vapor trap. For example, the detector system may use gas phase redox reactions and spectral absorption of mercury vapor. The gas chromatograph initially separates compounds that percolate through a bed of heated mercuric oxide (HgO) in a silica--or other metal--aerogel material which acts as an insulator. Compounds easily oxidized by HgO liberate atomic mercury that subsequently pass through a detection chamber which includes a detector cell, such as quartz, that is illuminated with a 254 nm ultra-violet (UV) mercury discharge lamp which generates the exact mercury absorption bands that are used to detect the liberated mercury atoms. Atomic mercury strongly absorbs 254 nm energy is therefore a specific signal for reducing compounds eluting from the capillary GC, whereafter the atomic mercury is trapped for example, in a silicon-aerogel trap.

  14. 30 CFR 57.7053 - Moving hand-held drills.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Moving hand-held drills. 57.7053 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7053 Moving hand-held drills. Before...

  15. 30 CFR 57.7053 - Moving hand-held drills.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Moving hand-held drills. 57.7053 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7053 Moving hand-held drills. Before...

  16. 30 CFR 57.7053 - Moving hand-held drills.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Moving hand-held drills. 57.7053 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7053 Moving hand-held drills. Before...

  17. 30 CFR 57.7053 - Moving hand-held drills.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Moving hand-held drills. 57.7053 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7053 Moving hand-held drills. Before...

  18. 30 CFR 57.7053 - Moving hand-held drills.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Moving hand-held drills. 57.7053 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7053 Moving hand-held drills. Before...

  19. 30 CFR 56.14116 - Hand-held power tools.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., disc sanders, grinders and circular and chain saws, when used in the hand-held mode shall be operated with controls which require constant hand or finger pressure. (b) Circular saws and chain saws...

  20. 30 CFR 57.14116 - Hand-held power tools.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., disc sanders, grinders and circular and chain saws, when used in the hand-held mode shall be operated with controls which require constant hand or finger pressure. (b) Circular saws and chain saws...

  1. Electronic, Hand-Held, Wireless Text-And-Graphics Viewer

    NASA Technical Reports Server (NTRS)

    Palumbo, Daniel L.

    1994-01-01

    Proposed electronic, hand-held, wireless viewer presents written material to reader in way that closely resembles that of paper reading material. Viewer presents text and graphics like those normally found in books, newspapers, and magazines. Its hand-held and wireless features enable it to be used in positions and areas where books and magazines are normally used. Device consists primarily of two parts: the receiver/information store and viewing screen.

  2. Automated Hand-Held UXO Detection, Classification & Discrimination Sensor

    SciTech Connect

    Bell, Thomas H.

    2000-06-12

    The research focused on procedures for target discrimination and classification using hand-held EMI sensors. The idea is to have a small, portable sensor that can be operated in a sweep or similar pattern in front of the operator, and that is capable of distinguishing between buried UXO and clutter on the spot. Curing Phase 1, we developed the processing techniques for distinguishing between buried UXO and clutter using the EM61-HH hand-held metal detector.

  3. Hand held phase-shifting diffraction Moire interferometer

    DOEpatents

    Deason, V.A.; Ward, M.B.

    1994-09-20

    An interferometer is described in which a coherent beam of light is generated within a remote case and transmitted to a hand held unit tethered to said remote case, said hand held unit having optical elements for directing a pair of mutually coherent collimated laser beams at a diffraction grating. Data from the secondary or diffracted beams are then transmitted to a separate video and data acquisition system for recording and analysis for load induced deformation or for identification purposes. Means are also provided for shifting the phase of one incident beam relative to the other incident beam and being controlled from within said remote case. 4 figs.

  4. Hand held phase-shifting diffraction moire interferometer

    DOEpatents

    Deason, Vance A.; Ward, Michael B.

    1994-01-01

    An interferometer in which a coherent beam of light is generated within a remote case and transmitted to a hand held unit tethered to said remote case, said hand held unit having optical elements for directing a pair of mutually coherent collimated laser beams at a diffraction grating. Data from the secondary or diffracted beams are then transmitted to a separate video and data acquisition system for recording and analysis for load induced deformation or for identification purposes. Means are also provided for shifting the phase of one incident beam relative to the other incident beam and being controlled from within said remote case.

  5. 30 CFR 56.12033 - Hand-held electric tools.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Hand-held electric tools. 56.12033 Section 56.12033 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity §...

  6. 30 CFR 56.12033 - Hand-held electric tools.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Hand-held electric tools. 56.12033 Section 56.12033 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity §...

  7. 30 CFR 56.12033 - Hand-held electric tools.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Hand-held electric tools. 56.12033 Section 56.12033 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity §...

  8. 30 CFR 56.12033 - Hand-held electric tools.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Hand-held electric tools. 56.12033 Section 56.12033 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity §...

  9. 30 CFR 56.12033 - Hand-held electric tools.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Hand-held electric tools. 56.12033 Section 56.12033 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity §...

  10. Hand-held Calculators: Past, Present, and Future

    ERIC Educational Resources Information Center

    Bell, Max; And Others

    1977-01-01

    Recommendations of several publications with regard to the use of hand-held calculators in the mathematics curriculum are presented. Relevant portions of the NACOME and Euclid Conference reports are cited as well as a report to NSF and recommendations from an NIE/NSF conference. Recommendations support expanded use of, and research concerning,…

  11. Hand-Held Ultrasonic Instrument for Reading Matrix Symbols

    NASA Technical Reports Server (NTRS)

    Schramm, Harry F.; Kula, John P.; Gurney, John W.; Lior, Ephraim D.

    2008-01-01

    A hand-held instrument that would include an ultrasonic camera has been proposed as an efficient means of reading matrix symbols. The proposed instrument could be operated without mechanical raster scanning. All electronic functions from excitation of ultrasonic pulses through final digital processing for decoding matrix symbols would be performed by dedicated circuitry within the single, compact instrument housing.

  12. Epilepsy Forewarning Using A Hand-Held Device

    SciTech Connect

    Hively, LM

    2005-02-21

    Over the last decade, ORNL has developed and patented a novel approach for forewarning of a large variety of machine and biomedical events. The present implementation uses desktop computers to analyze archival data. This report describes the next logical step in this effort, namely use of a hand-held device for the analysis.

  13. Hand-held radiometry: A set of notes developed for use at the Workshop of Hand-held radiometry

    NASA Technical Reports Server (NTRS)

    Jackson, R. D.; Pinter, P. J., Jr.; Reginato, R. J.; Idso, S. B. (Principal Investigator)

    1980-01-01

    A set of notes was developed to aid the beginner in hand-held radiometry. The electromagnetic spectrum is reviewed, and pertinent terms are defined. View areas of multiband radiometers are developed to show the areas of coincidence of adjacent bands. The amounts of plant cover seen by radiometers having different fields of view are described. Vegetation indices are derived and discussed. Response functions of several radiometers are shown and applied to spectrometer data taken over 12 wheat plots, to provide a comparison of instruments and bands within and among instruments. The calculation of solar time is reviewed and applied to the calculation of the local time of LANDSAT satellite overpasses for any particular location in the Northern Hemisphere. The use and misuse of hand-held infrared thermometers are discussed, and a procedure for photographic determination of plant cover is described. Some suggestions are offered concerning procedures to be followed when collecting hand-held spectral and thermal data. A list of references pertinent to hand-held radiometry is included.

  14. A First Look at Mobile Hand-Held Device Traffic

    NASA Astrophysics Data System (ADS)

    Maier, Gregor; Schneider, Fabian; Feldmann, Anja

    Although mobile hand-held devices (MHDs) are ubiquitous today, little is know about how they are used - especially at home. In this paper, we cast a first look on mobile hand-held device usage from a network perspective. We base our study on anonymized packet level data representing more than 20,000 residential DSL customers. Our characterization of the traffic shows that MHDs are active on up to 3% of the monitored DSL lines. Mobile devices from Apple (i.e., iPhones and iPods) are, by a huge margin, the most commonly used MHDs and account for most of the traffic. We find that MHD traffic is dominated by multimedia content and downloads of mobile applications.

  15. Engineering issues for hand-held sensing devices, with examples

    NASA Astrophysics Data System (ADS)

    Freiwald, David A.; Freiwald, Joyce

    1994-03-01

    It is now U.S. defense policy that there will be no new platform starts. The emphasis for platforms will be on O&M cost reduction, life-extension improvements, and force-multiplier- device upgrades. There is also an increasing emphasis on hand-held force-multiplier devices for individuals, which is the focus of this paper. Engineering issues include operations analysis, weight, cube, cost, prime power, ease of use, data storage, reliability, fault tolerance, data communications and human factors. Two examples of hand-held devices are given. Applications include USMC, Army, SOCOM, DEA, FBI, SS, Border Patrol and others. Barriers to adoption of such technology are also discussed.

  16. A Cheap, Semiquantitative Hand-Held Conductivity Tester.

    ERIC Educational Resources Information Center

    Zawacky, Susan K. S.

    1995-01-01

    Describes a design for a hand-held conductivity tester powered by a 9V battery that gives semi-quantitative results for aqueous electrolyte solutions of concentrations ranging from 0.001 M to 0.1 M. The tester uses a bar-graph LED driven by an LM3914 integrated circuit to indicate the level of conductivity. A list of parts, procedures, and results…

  17. Distributing Data from Desktop to Hand-Held Computers

    NASA Technical Reports Server (NTRS)

    Elmore, Jason L.

    2005-01-01

    A system of server and client software formats and redistributes data from commercially available desktop to commercially available hand-held computers via both wired and wireless networks. This software is an inexpensive means of enabling engineers and technicians to gain access to current sensor data while working in locations in which such data would otherwise be inaccessible. The sensor data are first gathered by a data-acquisition server computer, then transmitted via a wired network to a data-distribution computer that executes the server portion of the present software. Data in all sensor channels -- both raw sensor outputs in millivolt units and results of conversion to engineering units -- are made available for distribution. Selected subsets of the data are transmitted to each hand-held computer via the wired and then a wireless network. The selection of the subsets and the choice of the sequences and formats for displaying the data is made by means of a user interface generated by the client portion of the software. The data displayed on the screens of hand-held units can be updated at rates from 1 to

  18. A hand-held triangulation sensor for small features measurement

    NASA Astrophysics Data System (ADS)

    Abramovich, Gil; Harding, Kevin

    2010-11-01

    This paper describes progressive generations of hand held triangulation sensors for measuring small features, from edge breaks to corrosion pits. We describe the design considerations, ergonomics, packaging and interface between the device and part, such as the sensor tip and optional fixtures. We then present a customized design to address different types of surface features and defects. Next, we present the calibration concept, and its execution. The paper closes by summarizing system performance evaluation experiments and their results. It was shown that the system is capable of measuring edges down to a radius of 250 microns at a repeatability of 50 microns.

  19. Development of dual sensor hand-held detector

    NASA Astrophysics Data System (ADS)

    Sezgin, Mehmet

    2010-04-01

    In this paper hand-held dual sensor detector development requirements are considered dedicated to buried object detection. Design characteristics of such a system are categorized and listed. Hardware and software structures, ergonomics, user interface, environmental and EMC/EMI tests to be applied and performance test issues are studied. Main properties of the developed system (SEZER) are presented, which contains Metal Detector (MD) and Ground Penetrating Radar (GPR). The realized system has ergonomic structure and can detect both metallic and non-metallic buried objects. Moreover classification of target is possible if it was defined to the signal processing software in learning phase.

  20. Hand-held portable microarray reader for biodetection

    DOEpatents

    Thompson, Deanna Lynn; Coleman, Matthew A; Lane, Stephen M; Matthews, Dennis L; Albala, Joanna; Wachsmann-Hogiu, Sebastian

    2013-04-23

    A hand-held portable microarray reader for biodetection includes a microarray reader engineered to be small enough for portable applications. The invention includes a high-powered light-emitting diode that emits excitation light, an excitation filter positioned to receive the excitation light, a slide, a slide holder assembly for positioning the slide to receive the excitation light from the excitation filter, an emission filter positioned to receive the excitation light from the slide, a lens positioned to receive the excitation light from the emission filter, and a CCD camera positioned to receive the excitation light from the lens.

  1. A Hand Held Ratioing Radiometer for remote radiance measurements

    NASA Technical Reports Server (NTRS)

    Daubner, L.; Davies, J.; Cumming, C.; Goetz, A.

    1982-01-01

    The small, lightweight Hand Held Ratioing Radiometer (HHRR) measures the ratio of spectral reflectance in any of 25 pairs of narrow bands in the 400 to 2500 nanometer spectral region. Two parallel optical trains view the scene through separate filters mounted in two filter wheels each containing five filters. Absolute reflectance of the scene can also be measured. HHRR is particularly useful for ground truth studies for the interpretation of imagery from Landsat, the thematic mappers and the forthcoming SPOT satellite. Its small size and simplicity of operation make it useful to geologists, botanists, oceanographers and many other geotechnologists.

  2. Video indirect ophthalmoscopy using a hand-held video camera.

    PubMed

    Shanmugam, Mahesh P

    2011-01-01

    Fundus photography in adults and cooperative children is possible with a fundus camera or by using a slit lamp-mounted digital camera. Retcam TM or a video indirect ophthalmoscope is necessary for fundus imaging in infants and young children under anesthesia. Herein, a technique of converting and using a digital video camera into a video indirect ophthalmoscope for fundus imaging is described. This device will allow anyone with a hand-held video camera to obtain fundus images. Limitations of this technique involve a learning curve and inability to perform scleral depression.

  3. Hand held data collection and monitoring system for nuclear facilities

    DOEpatents

    Brayton, Darryl D.; Scharold, Paul G.; Thornton, Michael W.; Marquez, Diana L.

    1999-01-01

    Apparatus and method is disclosed for a data collection and monitoring system that utilizes a pen based hand held computer unit which has contained therein interaction software that allows the user to review maintenance procedures, collect data, compare data with historical trends and safety limits, and input new information at various collection sites. The system has a means to allow automatic transfer of the collected data to a main computer data base for further review, reporting, and distribution purposes and uploading updated collection and maintenance procedures. The hand held computer has a running to-do list so sample collection and other general tasks, such as housekeeping are automatically scheduled for timely completion. A done list helps users to keep track of all completed tasks. The built-in check list assures that work process will meet the applicable processes and procedures. Users can hand write comments or drawings with an electronic pen that allows the users to directly interface information on the screen.

  4. Hand held data collection and monitoring system for nuclear facilities

    DOEpatents

    Brayton, D.D.; Scharold, P.G.; Thornton, M.W.; Marquez, D.L.

    1999-01-26

    Apparatus and method is disclosed for a data collection and monitoring system that utilizes a pen based hand held computer unit which has contained therein interaction software that allows the user to review maintenance procedures, collect data, compare data with historical trends and safety limits, and input new information at various collection sites. The system has a means to allow automatic transfer of the collected data to a main computer data base for further review, reporting, and distribution purposes and uploading updated collection and maintenance procedures. The hand held computer has a running to-do list so sample collection and other general tasks, such as housekeeping are automatically scheduled for timely completion. A done list helps users to keep track of all completed tasks. The built-in check list assures that work process will meet the applicable processes and procedures. Users can hand write comments or drawings with an electronic pen that allows the users to directly interface information on the screen. 15 figs.

  5. A hand-held EPR scanner for transcutaneous oximetry

    NASA Astrophysics Data System (ADS)

    Wolfson, Helen; Ahmad, Rizwan; Twig, Ygal; Blank, Aharon; Kuppusamy, Periannan

    2015-03-01

    Cutaneous (skin) oxygenation is an important prognostic factor for the treatment of chronic wounds, skin cancer, diabetes side effects, and limb amputation. Currently, there are no reliable methods for measuring this parameter. Oximetry, using electron paramagnetic resonance (EPR) spectroscopy, is emerging as a potential tool for clinical oximetry, including cutaneous applications. The problem with EPR oximetry, however, is that the conventional EPR design requires the use of a large magnet that can generate homogeneous field across the sample, making it unattractive for clinical practice. We present a novel approach that makes use of a miniature permanent magnet, combined with a small microwave resonator, to enable the acquisition of EPR signals from paramagnetic species placed on the skin. The instrumentation consists of a hand-held, modular, cylindrical probehead with overall dimensions of 36-mm diameter and 24-mm height, with 150-g weight. The probehead includes a Halbach array of 16 pieces (4×4×8 mm3) of Sm-Co permanent magnet and a loop-gap resonator (2.24 GHz). Preliminary measurements using a Hahn-echo pulse sequence (800 echos in 20 ms) showed a signalto- noise ratio of ~70 compared to ~435 in a homogenous magnet under identical settings. Further work is in progress to improve the performance of the probehead and to optimize the hand-held system for clinical use

  6. Bone age maturity assessment using hand-held device

    NASA Astrophysics Data System (ADS)

    Ratib, Osman M.; Gilsanz, Vicente; Liu, Xiaodong; Boechat, M. I.

    2004-04-01

    Purpose: Assessment of bone maturity is traditionally performed through visual comparison of hand and wrist radiograph with existing reference images in textbooks. Our goal was to develop a digital index based on idealized hand Xray images that can be incorporated in a hand held computer and used for visual assessment of bone age for patients. Material and methods: Due to the large variability in bone maturation in normals, we generated a set of "ideal" images obtained by computer combinations of images from our normal reference data sets. Software for hand-held PDA devices was developed for easy navigation through the set of images and visual selection of matching images. A formula based on our statistical analysis provides the standard deviation from normal based on the chronological age of the patient. The accuracy of the program was compared to traditional interpretation by two radiologists in a double blind reading of 200 normal Caucasian children (100 boys, 100 girls). Results: Strong correlations were present between chronological age and bone age (r > 0.9) with no statistical difference between the digital and traditional assessment methods. Determinations of carpal bone maturity in adolescents was slightly more accurate using the digital system. The users did praise the convenience and effectiveness of the digital Palm Index in clinical practice. Conclusion: An idealized digital Palm Bone Age Index provides a convenient and effective alternative to conventional atlases for the assessment of skeletal maturity.

  7. Hand-Held Reader for Colorimetric Sensor Arrays.

    PubMed

    Askim, Jon R; Suslick, Kenneth S

    2015-08-01

    An inexpensive hand-held device for analysis of colorimetric sensor arrays (CSAs) has been developed. The device makes use of a contact image sensor (CIS), technology commonly used in business card scanners, to rapidly collect low-noise colorimetric data for chemical sensing. The lack of moving parts and insensitivity to vibration allow for lower noise and improved scan rates compared to other digital imaging techniques (e.g., digital cameras, flatbed scanners); signal-to-noise ratios are a factor of 3-10 higher than currently used methods, and scan rates are up to 250 times faster without compromising sensitivity. The device is capable of real-time chemical analysis at scan rates up to 48 Hz. PMID:26177346

  8. Hand-Held Reader for Colorimetric Sensor Arrays.

    PubMed

    Askim, Jon R; Suslick, Kenneth S

    2015-08-01

    An inexpensive hand-held device for analysis of colorimetric sensor arrays (CSAs) has been developed. The device makes use of a contact image sensor (CIS), technology commonly used in business card scanners, to rapidly collect low-noise colorimetric data for chemical sensing. The lack of moving parts and insensitivity to vibration allow for lower noise and improved scan rates compared to other digital imaging techniques (e.g., digital cameras, flatbed scanners); signal-to-noise ratios are a factor of 3-10 higher than currently used methods, and scan rates are up to 250 times faster without compromising sensitivity. The device is capable of real-time chemical analysis at scan rates up to 48 Hz.

  9. Hand-Held Devices Detect Explosives and Chemical Agents

    NASA Technical Reports Server (NTRS)

    2010-01-01

    Ion Applications Inc., of West Palm Beach, Florida, partnered with Ames Research Center through Small Business Innovation Research (SBIR) agreements to develop a miniature version ion mobility spectrometer (IMS). While NASA was interested in the instrument for detecting chemicals during exploration of distant planets, moons, and comets, the company has incorporated the technology into a commercial hand-held IMS device for use by the military and other public safety organizations. Capable of detecting and identifying molecules with part-per-billion sensitivity, the technology now provides soldiers with portable explosives and chemical warfare agent detection. The device is also being adapted for detecting drugs and is employed in industrial processes such as semiconductor manufacturing.

  10. Comparative Geometrical Investigations of Hand-Held Scanning Systems

    NASA Astrophysics Data System (ADS)

    Kersten, T. P.; Przybilla, H.-J.; Lindstaedt, M.; Tschirschwitz, F.; Misgaiski-Hass, M.

    2016-06-01

    An increasing number of hand-held scanning systems by different manufacturers are becoming available on the market. However, their geometrical performance is little-known to many users. Therefore the Laboratory for Photogrammetry & Laser Scanning of the HafenCity University Hamburg has carried out geometrical accuracy tests with the following systems in co-operation with the Bochum University of Applied Sciences (Laboratory for Photogrammetry) as well as the Humboldt University in Berlin (Institute for Computer Science): DOTProduct DPI-7, Artec Spider, Mantis Vision F5 SR, Kinect v1 + v2, Structure Sensor and Google's Project Tango. In the framework of these comparative investigations geometrically stable reference bodies were used. The appropriate reference data were acquired by measurement with two structured light projection systems (AICON smartSCAN and GOM ATOS I 2M). The comprehensive test results of the different test scenarios are presented and critically discussed in this contribution.

  11. A Smart Haptic Hand-Held Device for Neurosurgical Microdissection.

    PubMed

    Payne, Christopher J; Marcus, Hani J; Yang, Guang-Zhong

    2015-09-01

    Microneurosurgery requires dexterity, precision and delicate force application in order to be carried out safely and effectively. Neurosurgeons must apply sufficient force in order to carry out microsurgical procedures effectively but not excessive force such that iatrogenic injury occurs. This paper presents a smart hand-held microsurgical instrument that indicates to the surgeon when a force-threshold has been exceeded by providing vibrotactile feedback. Many existing haptic-feedback systems, particularly master-slave robotic platforms, are large, highly complex, and costly. By comparison, the proposed device is compact, fail-safe and low cost. Two psychophysical user studies were carried out to assess the proposed vibrotactile force-threshold feedback system. A cadaveric pilot study was carried out to evaluate the device in a microdissection task. In all the studies performed, the haptic dissector device has shown to be effective in providing real-time feedback in terms of force application during microsurgical tasks. PMID:25631207

  12. Center of percussion of hand-held implements

    NASA Astrophysics Data System (ADS)

    Cross, Rod

    2004-05-01

    The center of percussion is commonly regarded as a sweet spot when referring to a baseball bat or a tennis racquet because it is assumed that there will be no sudden motion of the handle with respect to the hand if the corresponding axis of rotation passes through the hand. A problem with this interpretation is that the hand extends over a finite length of the handle and exerts an opposing reaction force on the handle. The hand also changes the total mass and moment of inertia of the system, while the arm restricts free motion of the hand. Experimental results are presented showing that the axis of rotation passes through the hand or the wrist for all the usual impact points on a hand-held implement. As a result, the impact point that feels best is usually the node of the fundamental vibration mode, not the center of percussion.

  13. Hand-held echocardiography: added value in clinical cardiological assessment

    PubMed Central

    Giannotti, Giovanna; Mondillo, Sergio; Galderisi, Maurizio; Barbati, Riccardo; Zacà, Valerio; Ballo, Piercarlo; Agricola, Eustachio; Guerrini, Francesco

    2005-01-01

    Background The ultrasonic industry has recently produced echocardiographic Hand Held Devices (miniaturized, compact and battery-equipped echocardiographic systems). Their potential usefulness has been successfully assessed in a wide range of clinical conditions. The aim of the study was to verify if the routine use of a basic model of echocardiographic Hand Held Device (HHD) could be an important diagnostic tool during outpatient cardiologic consulting or in non-cardiologic hospital sections. Methods 87 consecutive patients were included in this study; they underwent routine physical examination, resting ECG and echocardiographic evaluation using a basic model of HHD performed by trained echocardiographists; the cardiologist, whenever possible, formulated a diagnosis. The percentage of subjects in whom the findings were judged reasonably adequate for final diagnostic and therapeutic conclusions was used to quantify the "conclusiveness" of HHD evaluation. Successively, all patients underwent a second echocardiographic evaluation, by an examiner with similar echocardiographic experience, performed using a Standard Echo Device (SED). The agreement between the first and the second echocardiographic exam was also assessed. Results Mean examination time was 6.7 ± 1.5 min. using HHD vs. 13.6 ± 2.4 min. using SED. The echocardiographic examination performed using HHD was considered satisfactory in 74/87 patients (85.1% conclusiveness). Among the 74 patients for whom the examination was conclusive, the diagnosis was concordant with that obtained with the SED examination in 62 cases (83.8% agreement). Conclusion HHD may generally allow a reliable cardiologic basic evaluation of outpatient or subjects admitted to non-cardiologic sections, more specifically in particular subgroups of patients, with a gain in terms of time, shortening patient waiting lists and reducing healthy costs. PMID:15790409

  14. 30 CFR 77.402 - Hand-held power tools; safety devices.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Hand-held power tools; safety devices. 77.402... COAL MINES Safeguards for Mechanical Equipment § 77.402 Hand-held power tools; safety devices. Hand-held power tools shall be equipped with controls requiring constant hand or finger pressure to...

  15. 30 CFR 75.1724 - Hand-held power tools; safety devices.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Hand-held power tools; safety devices. 75.1724... SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1724 Hand-held power tools; safety devices. Hand-held power tools shall be equipped with controls requiring...

  16. 30 CFR 75.1724 - Hand-held power tools; safety devices.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Hand-held power tools; safety devices. 75.1724... SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1724 Hand-held power tools; safety devices. Hand-held power tools shall be equipped with controls requiring...

  17. 30 CFR 75.1724 - Hand-held power tools; safety devices.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Hand-held power tools; safety devices. 75.1724... SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1724 Hand-held power tools; safety devices. Hand-held power tools shall be equipped with controls requiring...

  18. 30 CFR 77.402 - Hand-held power tools; safety devices.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Hand-held power tools; safety devices. 77.402... COAL MINES Safeguards for Mechanical Equipment § 77.402 Hand-held power tools; safety devices. Hand-held power tools shall be equipped with controls requiring constant hand or finger pressure to...

  19. 47 CFR 15.519 - Technical requirements for hand held UWB systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 1 2014-10-01 2014-10-01 false Technical requirements for hand held UWB... DEVICES Ultra-Wideband Operation § 15.519 Technical requirements for hand held UWB systems. (a) UWB devices operating under the provisions of this section must be hand held, i.e., they are relatively...

  20. 30 CFR 77.402 - Hand-held power tools; safety devices.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Hand-held power tools; safety devices. 77.402... COAL MINES Safeguards for Mechanical Equipment § 77.402 Hand-held power tools; safety devices. Hand-held power tools shall be equipped with controls requiring constant hand or finger pressure to...

  1. 30 CFR 77.402 - Hand-held power tools; safety devices.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Hand-held power tools; safety devices. 77.402... COAL MINES Safeguards for Mechanical Equipment § 77.402 Hand-held power tools; safety devices. Hand-held power tools shall be equipped with controls requiring constant hand or finger pressure to...

  2. 30 CFR 75.1724 - Hand-held power tools; safety devices.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Hand-held power tools; safety devices. 75.1724... SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1724 Hand-held power tools; safety devices. Hand-held power tools shall be equipped with controls requiring...

  3. Stereo vision based hand-held laser scanning system design

    NASA Astrophysics Data System (ADS)

    Xiong, Hanwei; Xu, Jun; Wang, Jinming

    2011-11-01

    Although 3D scanning system is used more and more broadly in many fields, such computer animate, computer aided design, digital museums, and so on, a convenient scanning device is expansive for most people to afford. In another hand, imaging devices are becoming cheaper, a stereo vision system with two video cameras cost little. In this paper, a hand held laser scanning system is design based on stereo vision principle. The two video cameras are fixed tighter, and are all calibrated in advance. The scanned object attached with some coded markers is in front of the stereo system, and can be changed its position and direction freely upon the need of scanning. When scanning, the operator swept a line laser source, and projected it on the object. At the same time, the stereo vision system captured the projected lines, and reconstructed their 3D shapes. The code markers are used to translate the coordinate system between scanned points under different view. Two methods are used to get more accurate results. One is to use NURBS curves to interpolate the sections of the laser lines to obtain accurate central points, and a thin plate spline is used to approximate the central points, and so, an exact laser central line is got, which guards an accurate correspondence between tow cameras. Another way is to incorporate the constraint of laser swept plane on the reconstructed 3D curves by a PCA (Principle Component Analysis) algorithm, and more accurate results are obtained. Some examples are given to verify the system.

  4. Cordless hand-held optical 3D sensor

    NASA Astrophysics Data System (ADS)

    Munkelt, Christoph; Bräuer-Burchardt, Christian; Kühmstedt, Peter; Schmidt, Ingo; Notni, Gunther

    2007-07-01

    A new mobile optical 3D measurement system using phase correlation based fringe projection technique will be presented. The sensor consist of a digital projection unit and two cameras in a stereo arrangement, whereby both are battery powered. The data transfer to a base station will be done via WLAN. This gives the possibility to use the system in complicate, remote measurement situations, which are typical in archaeology and architecture. In the measurement procedure the sensor will be hand-held by the user, illuminating the object with a sequence of less than 10 fringe patterns, within a time below 200 ms. This short sequence duration was achieved by a new approach, which combines the epipolar constraint with robust phase correlation utilizing a pre-calibrated sensor head, containing two cameras and a digital fringe projector. Furthermore, the system can be utilized to acquire the all around shape of objects by using the phasogrammetric approach with virtual land marks introduced by the authors 1, 2. This way no matching procedures or markers are necessary for the registration of multiple views, which makes the system very flexible in accomplishing different measurement tasks. The realized measurement field is approx. 100 mm up to 400 mm in diameter. The mobile character makes the measurement system useful for a wide range of applications in arts, architecture, archaeology and criminology, which will be shown in the paper.

  5. Hand-held digital line-scanning laser ophthalmoscope (LSLO)

    NASA Astrophysics Data System (ADS)

    Hammer, Daniel X.; Ferguson, R. D.; Ustun, Teoman E.; Maislin, Gami; Webb, Robert H.

    2004-07-01

    Scanning laser ophthalmoscopy is a powerful research tool with specialized but, to date, limited use in ophthalmic clinics due in part to the size, cost, and complexity of instruments. Conversely, low-cost retinal imaging devices have limited capabilities in screening, detection, and diagnosis of diseases. To fill the niche between these two, a low-cost, hand-held, line-scanning laser ophthalmoscope (LSLO) was designed, constructed, and tested on normal human subjects. The LSLO has only one moving part, multiple imaging modes, and uses low-cost but highly sensitive complimentary metal oxide semiconductor (CMOS) linear arrays for imaging with a detector dynamic range of 12-bits. The line-scanning approach produces high contrast quasi-confocal images with nearly the same performance as a flying-spot SLO. Imaging modes include simultaneous dual wavelength illumination and live stereoscopic imaging with a split aperture. Image processing and display functions are controlled with two stacked prototype compact printed circuit boards using field-programmable gated arrays (FPGA) and other digital electronic elements. With near shot-noise limited performance, the digital LSLO camera requires low illumination power (~ 100 μW) at near-infrared wavelengths. Wide field fundus images with several imaging modes have been obtained from several human subjects. The LSLO will significantly enhance confocal scanning laser ophthalmoscopy for routine use by ophthalmologist, optometrists, general practitioners and also non-specialized emergency medical personnel and technicians in the field for retinal disease detection and other diverse applications.

  6. Sensor fusion for hand-held multisensor landmine detection

    NASA Astrophysics Data System (ADS)

    Agarwal, Sanjeev; Chander, Venkat S.; Palit, Partha P.; Stanley, Joe; Mitchell, O. Robert

    2001-10-01

    Sensor fusion issues in a streamlined assimilation of multi-sensor information for landmine detection are discussed. In particular multi-sensor fusion in hand-held landmine detection system with ground penetrating radar (GPR) and metal detector sensors is investigated. The fusion architecture consists of feature extraction for individual sensors followed by a feed-forward neural network training to learn the feature space representation of the mine/no-mine classification. A correlation feature from GPR, and slope and energy feature from metal detector are used for discrimination. Various fusion strategies are discussed and results compared against each other and against individual sensors using ROC curves for the available multi-sensor data. Both feature level and decision level fusion have been investigated. Simple decision level fusion scheme based on Dempster-Shafer evidence accumulation, soft AND, MIN and MAX are compared. Feature level fusion using neural network training is shown to provide best results. However comparable performance is achieved using decision level sensor fusion based on Dempster-Shafer accumulation. It is noted that, the above simple feed-forward fusion scheme lacks a means to verify detections after a decision has been made. New detection algorithms that are more than anomaly detectors are needed. Preliminary results with features based on independent component analysis (ICA) show promising results towards this end.

  7. Hand-Held Units for Short-Range Wireless Biotelemetry

    NASA Technical Reports Server (NTRS)

    Miranda, Felix A.; Simons, Rainee N.

    2008-01-01

    Special-purpose hand-held radiotransceiver units have been proposed as means of short-range radio powering and interrogation of surgically implanted microelectromechanical sensors and actuators. These units are based partly on the same principles as those of the units described in "Printed Multi- Turn Loop Antennas for RF Biotelemetry" (LEW-17879-1), NASA Tech Briefs, Vol. 31, No. 6 (June 2007), page 48. Like the previously reported units, these units would make it unnecessary to have wire connections between the implanted devices and the external equipment used to activate and interrogate them. Like a unit of the previously reported type, a unit of the type now proposed would include a printed-circuit antenna on a dielectric substrate. The antenna circuitry would include integrated surface-mount inductors for impedance tuning. Circuits for processing the signals transmitted and received by the antenna would be included on the substrate. During operation, the unit would be positioned near (but not in electrical contact with) a human subject, in proximity to a microelectromechanical sensor or actuator that has been surgically implanted in the subject. It has been demonstrated that significant electromagnetic coupling with an implanted device could be established at a distance of as much as 4 in. (.10 cm). During operation in the interrogation mode, the antenna of the unit would receive a radio telemetry signal transmitted by the surgically implanted device. The antenna substrate would have dimensions of approximately 3.25 by 3.75 inches (approximately 8.3 by 9.5 cm). The substrate would have a thickness of the order of 30 mils (of the order of a somewhat less than a millimeter). The substrate would be made of low-radiofrequency- loss dielectric material that could be, for example, fused quartz, alumina, or any of a number of commercially available radio-frequency dielectric composite materials. The antenna conductors would typically be made of copper or a

  8. Portable Hand-Held Electrochemical Sensor for the Transuranics

    SciTech Connect

    Dale D. Russell, William B. Knowlton, Ph.D.; Russel Hertzog, Ph.D

    2005-11-25

    sensitive detector for uranium. Millimeter scale electrodes, operated by a hand-held instrument assembled in this lab and operated in the voltammetric mode, were transported to the DOE-Nevada test site (Las Vegas, NV) where field detection and quantitation of plutonium, uranium, and a mixture of these two elements was also demonstrated. Several probe designs were prepared, built and tested including probes with movable protective windows. A miniature, battery powered potentiostat was designed, built and demonstrated for use in a hand-held field portable instrument. This work was performed largely by undergraduates who gained valuable research experience, and many of them have continued on to graduate schools. In addition, they all gained exposure to and appreciation for national security research, in particular non-proliferation research. Four graduate students participated and one earned the MS degree on this project.

  9. Direction-Sensitive Hand-Held Gamma-Ray Spectrometer

    SciTech Connect

    Mukhopadhyay, S.

    2012-10-04

    A novel, light-weight, hand-held gamma-ray detector with directional sensitivity is being designed. The detector uses a set of multiple rings around two cylindrical surfaces, which provides precise location of two interaction points on two concentric cylindrical planes, wherefrom the source location can be traced back by back projection and/or Compton imaging technique. The detectors are 2.0 × 2.0 mm europium-doped strontium iodide (SrI2:Eu2+) crystals, whose light output has been measured to exceed 120,000 photons/MeV, making it one of the brightest scintillators in existence. The crystal’s energy resolution, less than 3% at 662 keV, is also excellent, and the response is highly linear over a wide range of gamma-ray energies. The emission of SrI2:Eu2+ is well matched to both photo-multiplier tubes and blue-enhanced silicon photodiodes. The solid-state photomultipliers used in this design (each 2.0 × 2.0 mm) are arrays of active pixel sensors (avalanche photodiodes driven beyond their breakdown voltage in reverse bias); each pixel acts as a binary photon detector, and their summed output is an analog representation of the total photon energy, while the individual pixel accurately defines the point of interaction. A simple back-projection algorithm involving cone-surface mapping is being modeled. The back projection for an event cone is a conical surface defining the possible location of the source. The cone axis is the straight line passing through the first and second interaction points.

  10. Hand-Held Color Meters Based on Interference Filters

    NASA Technical Reports Server (NTRS)

    Snyder, G. Jeffrey; Fleurial, Jean-Pierre; Caillat, Thierry; Chen, Gang; Yang, Rong Gui

    2004-01-01

    Small, inexpensive, hand-held optoelectronic color-measuring devices based on metal-film/dielectric-film interference filters are undergoing development. These color meters could be suitable for use in a variety of applications in which there are requirements to quantify or match colors for aesthetic purposes but there is no need for the high spectral resolution of scientific-grade spectrometers. Such applications typically occur in the paint, printing, and cosmetic industries, for example. The figure schematically depicts a color meter of this type being used to measure the color of a sample in terms of the spectrum of light reflected from the sample. Light from a white source (for example, a white light-emitting diode) passes through a collimating lens to the sample. Another lens collects some of the light reflected from the sample and focuses the light onto the input end of optical fiber. Light emerging from the output end of the optical fiber illuminates an array of photodetectors covered with metal/dielectric-film interference filters like those described in Metal/Dielectric-film Interference Color Filters (NPO-20217), NASA Tech Briefs, Vol. 23, No. 2 (February 1999), page 70. Typically, these are wide-band-pass filters, as shown at the bottom of the figure. The photodetector array need not be of any particular design: it could be something as simple as an assembly containing several photodiodes or something as elaborate as an active-pixel sensor or other imaging device. What is essential is that each of the photodetectors or each of several groups of photodetectors is covered with a metal/dielectric-film filter of a different color. In most applications, it would be desirable to have at least three different filters, each for a spectral band that contains one of the three primary additive red, green, and blue colors. In some applications, it may be necessary to have more than three different color filters in order to characterize subtle differences in color

  11. Hand Held Device for Wireless Powering and Interrogation of Biomems Sensors and Actuators

    NASA Technical Reports Server (NTRS)

    Miranda, Felix Antonio (Inventor); Simons, Rainee N (Inventor)

    2007-01-01

    A compact, hand-held device for wireless powering, interrogation and data retrieval from at least one implanted sensor. The hand-held device includes an antenna for powering an implanted sensor and for receiving data from the implanted sensor to the hand-held device for at least one of storage, display or analysis. The hand-held device establishes electromagnetic coupling with a low radiating radio frequency power inductor in the implanted sensor at a predefined separation and the antenna geometry allows for the antenna to power, interrogate and retrieve data from the implanted sensor without strapping the hand-held device to a human body housing the implanted sensor The hand-held device optionally allows for activation of the implanted sensor only during interrogation and data retrieval.

  12. 30 CFR 77.402 - Hand-held power tools; safety devices.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the tools or shall be equipped with friction or other equivalent safety devices. ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Hand-held power tools; safety devices. 77.402... COAL MINES Safeguards for Mechanical Equipment § 77.402 Hand-held power tools; safety devices....

  13. 30 CFR 75.1724 - Hand-held power tools; safety devices.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Hand-held power tools; safety devices. 75.1724... power tools; safety devices. Hand-held power tools shall be equipped with controls requiring constant hand or finger pressure to operate the tools or shall be equipped with friction or other...

  14. 16 CFR 1225.2 - Requirements for hand-held infant carriers.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Requirements for hand-held infant carriers... ACT REGULATIONS SAFETY STANDARD FOR HAND-HELD INFANT CARRIERS (Eff. 6-6-14) § 1225.2 Requirements...

  15. 49 CFR 392.82 - Using a hand-held mobile telephone.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... COMMERCIAL MOTOR VEHICLES Limiting the Use of Electronic Devices § 392.82 Using a hand-held mobile telephone... highway, including while temporarily stationary because of traffic, a traffic control device, or...

  16. 49 CFR 392.82 - Using a hand-held mobile telephone.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... COMMERCIAL MOTOR VEHICLES Limiting the Use of Electronic Devices § 392.82 Using a hand-held mobile telephone... highway, including while temporarily stationary because of traffic, a traffic control device, or...

  17. 49 CFR 392.82 - Using a hand-held mobile telephone.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... COMMERCIAL MOTOR VEHICLES Limiting the Use of Electronic Devices § 392.82 Using a hand-held mobile telephone... highway, including while temporarily stationary because of traffic, a traffic control device, or...

  18. Hand-held water fluoride analysis: An accessible caries prevention tool for dental professionals.

    PubMed

    Quock, Ryan L; Yank, Stephanie W; Chan, Jarvis T

    2011-01-01

    This study sought to compare the relative accuracy of a commercially available hand-held water fluoride analysis unit with a standard laboratory bench-top fluoride-specific electrode/millivoltmeter apparatus, with the goal of identifying possible practical applications of the hand-held unit for preventive dentistry. The units analyzed identical gravimetrically prepared fluoride solutions ranging from 0.1 to 4.0 ppm. The average difference between the measurements from the hand-held unit and the nominal values of the fluoride solutions was 0.011 ppm (SD = 0.068), and the average difference between the hand-held unit's measurements and the bench-top unit's measurements was 0.030 ppm (SD = 0.115). T-test analysis demonstrated no statistical difference between measurements from the hand-held unit with either the nominal values of the fluoride solutions or the bench-top unit's measurements. Results indicate that the hand-held water fluoride analysis unit has an appropriate level of accuracy for the measurement of fluoride levels in drinking water samples by dental professionals.

  19. Impact of weighted density distribution function features on land mine detection using hand-held units

    NASA Astrophysics Data System (ADS)

    Stanley, Ronald J.; Somanchi, Satish; Gader, Paul D.

    2002-08-01

    Landmine detection using metal detector (MD) and ground penetrating radar (GPR) sensors in hand-held units is a difficult problem. Detection difficulties arise due to: 1) the varying composition and type of metal in landmines, 2) the time-varying nature of background and 3) the variation in height and velocity of the hand-held unit in data measurement. In prior research, spatially distributed MD features were explored for differentiating landmine signatures from background and non-landmine objects. These features were computed based on correlating sequences of MD energy values with six weighted density distribution functions. In this research the effectiveness of these features to detect landmines of varying metal composition and type is investigated. Experimental results are presented from statistical analysis for feature assessment. Preliminary experimental results are also presented for evaluating the impact on MD feature calculations from varying height and sweep rate of the hand-held unit for data acquisition.

  20. Computer implemented method, and apparatus for controlling a hand-held tool

    NASA Technical Reports Server (NTRS)

    Wagner, Kenneth William (Inventor); Taylor, James Clayton (Inventor)

    1999-01-01

    The invention described here in is a computer-implemented method and apparatus for controlling a hand-held tool. In particular, the control of a hand held tool is for the purpose of controlling the speed of a fastener interface mechanism and the torque applied to fasteners by the fastener interface mechanism of the hand-held tool and monitoring the operating parameters of the tool. The control is embodied in intool software embedded on a processor within the tool which also communicates with remote software. An operator can run the tool, or through the interaction of both software, operate the tool from a remote location, analyze data from a performance history recorded by the tool, and select various torque and speed parameters for each fastener.

  1. Hand-held radiometer red and photographic infrared spectral measurements of agricultural crops

    NASA Technical Reports Server (NTRS)

    Tucker, C. J.; Fan, C. J.; Elgin, J. H., Jr.; Mcmurtrey, J. E., III

    1978-01-01

    Red and photographic infrared radiance data, collected under a variety of conditions at weekly intervals throughout the growing season using a hand-held radiometer, were used to monitor crop growth and development. The vegetation index transformation was used to effectively compensate for the different irradiational conditions encountered during the study period. These data, plotted against time, compared the different crops measured by comparing their green leaf biomass dynamics. This approach, based entirely upon spectral inputs, closely monitors crop growth and development and indicates the promise of ground-based hand-held radiometer measurements of crops.

  2. Use of a hand-held meter for detecting subclinical ketosis in dairy cows.

    PubMed

    Voyvoda, Huseyin; Erdogan, Hasan

    2010-12-01

    The Optium Xceed is a new hand-held meter for determining blood β-hydroxybutyrate (BHBA) and glucose in human medicine. The objective of this study was to compare BHBA and glucose results obtained using the hand-held meter with those results made with a laboratory method and to evaluate its usefulness as a cowside test in the diagnosis of subclinical ketosis (SCK) in dairy cows. Seventy-eight blood samples from clinically healthy Holstein cows between 5 and 60 days post-calving were analysed. BHBA and glucose values were significantly higher with the hand-held meter versus laboratory methods. Correlation coefficients (r) for BHBA and glucose with the Optium Xceed versus laboratory methods were 0.97 and 0.63, respectively. Based on Bland-Altman plot and Passing-Bablok regression, agreement between two methods was good for BHBA but the agreement for glucose was only fair. When SCK was defined as plasma BHBA levels ≥ 1200 μmol/L, the sensitivity and specificity of the hand-held meter ketone testing in determining SCK were 85% and 94%, respectively. Raising the threshold of the laboratory method to ≥ 1400 μmol/L, the sensitivity and specificity incremented to 0.90 and 0.98, respectively. In conclusion, the blood ketone-monitoring device can be used as a rapid and reliable diagnostic test to detect SCK under field conditions.

  3. Enhancing Mathematical Concepts through Leading Questions and Hand-Held Data Collection Tools.

    ERIC Educational Resources Information Center

    Laughbaum, Edward D.

    Hand-held data collection technology allows for access to real-world data collection--at any other time and almost any place. Is the use of data and its collection desirable to the mathematical learning process? The answer is a resounding yes! Not only can significant mathematical ideas be taught in the process; colleagues are also helped in the…

  4. Hand-Held Model of a Sarcomere to Illustrate the Sliding Filament Mechanism in Muscle Contraction

    ERIC Educational Resources Information Center

    Jittivadhna, Karnyupha; Ruenwongsa, Pintip; Panijpan, Bhinyo

    2009-01-01

    From our teaching of the contractile unit of the striated muscle, we have found limitations in using textbook illustrations of sarcomere structure and its related dynamic molecular physiological details. A hand-held model of a striated muscle sarcomere made from common items has thus been made by us to enhance students' understanding of the…

  5. Online Responses towards Parental Rearing Styles Regarding Hand-Held Devices

    ERIC Educational Resources Information Center

    Geng, Gretchen; Disney, Leigh

    2014-01-01

    This article reviewed the literature on parental rearing styles and used responses from an online discussion forum to investigate people's opinions towards parental rearing styles and strategies when children use hand-held devices. Critical discourse analysis (CDA) was used as an analysis method via micro, meso and macro multi-level…

  6. 75 FR 27504 - Substantial Product Hazard List: Hand-Held Hair Dryers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-17

    ... to cause electrical current to flow beyond normal circuitry, the circuit interrupter will sense the... standard. 15 U.S.C. 2064(j). Underwriters Laboratories (``UL'') Standard for Safety for Household Electric... requirements for certain household appliances, including hand-held hair dryers. The current...

  7. Surgical procedure logging with use of a hand-held computer

    PubMed Central

    Fischer, Sandra; Lapinsky, Stephen E.; Weshler, Jason; Howard, Frazer; Rotstein, Lorne E.; Cohen, Zane; Stewart, Thomas E.

    2002-01-01

    Objective To evaluate the feasibility of incorporating hand-held computing technology in a surgical residency program, by means of hand-held devices for surgical procedure logging linked through the Internet to a central database. Setting Division of General Surgery, University of Toronto. Design A survey of general surgery residents. Methods The 69 residents in the general surgery training program received hand-held computers with preinstalled medical programs and a program designed for surgical procedure logging. Procedural data were uploaded via the Internet to a central database. Survey data were collected regarding previous computer use as well as previous procedure logging methods. Main outcome measure Utilization of the procedure logging system. Results After a 5-month pilot period, 38% of surgical residents were using the procedure-logging program successfully and on a regular basis. Program use was higher among more junior trainees. Analysis of the database provided valuable information on individual trainees, hospital programs and supervising surgeons, data that would assist in program development. Conclusions Hand-held devices can be implemented in a large division of general surgery to provide a reference database and a procedure-logging platform. However, user acceptance is not uniform and continued training and support are necessary to increase acceptance. The procedure database provides important information for optimizing trainees’ educational experience. PMID:12387537

  8. Droplet size characterization of hand-held atomization equipment typically used in vector control

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The atomization characteristics from four hand-held sprayers (Leco P-1, Colt ULV Aerosol Generator, UlVAFAN MK2, Turbair ElectraFan 12) and a Stihl SR400 backpack sprayer were evaluated using water- and oil-based solutions. The effects on droplet size spectrum for three insecticides (Tempo SC Ultra...

  9. A hand-held instrument to maintain steady tissue contact during probe-based confocal laser endomicroscopy.

    PubMed

    Latt, Win Tun; Newton, Richard C; Visentini-Scarzanella, Marco; Payne, Christopher J; Noonan, David P; Shang, Jianzhong; Yang, Guang-Zhong

    2011-09-01

    Probe-based confocal laser endomicroscopy (pCLE) provides high-resolution in vivo imaging for intraoperative tissue characterization. Maintaining a desired contact force between target tissue and the pCLE probe is important for image consistency, allowing large area surveillance to be performed. A hand-held instrument that can provide a predetermined contact force to obtain consistent images has been developed. The main components of the instrument include a linear voice coil actuator, a donut load-cell, and a pCLE probe. In this paper, detailed mechanical design of the instrument is presented and system level modeling of closed-loop force control of the actuator is provided. The performance of the instrument has been evaluated in bench tests as well as in hand-held experiments. Results demonstrate that the instrument ensures a consistent predetermined contact force between pCLE probe tip and tissue. Furthermore, it compensates for both simulated physiological movement of the tissue and involuntary movements of the operator's hand. Using pCLE video feature tracking of large colonic crypts within the mucosal surface, the steadiness of the tissue images obtained using the instrument force control is demonstrated by confirming minimal crypt translation.

  10. Hand-held transendoscopic robotic manipulators: A transurethral laser prostate surgery case study

    PubMed Central

    Hendrick, Richard J.; Mitchell, Christopher R.; Herrell, S. Duke; Webster, Robert J.

    2016-01-01

    Natural orifice endoscopic surgery can enable incisionless approaches, but a major challenge is the lack of small and dexterous instrumentation. Surgical robots have the potential to meet this need yet often disrupt the clinical workflow. Hand-held robots that combine thin manipulators and endoscopes have the potential to address this by integrating seamlessly into the clinical workflow and enhancing dexterity. As a case study illustrating the potential of this approach, we describe a hand-held robotic system that passes two concentric tube manipulators through a 5 mm port in a rigid endoscope for transurethral laser prostate surgery. This system is intended to catalyze the use of a clinically superior, yet rarely attempted, procedure for benign prostatic hyperplasia. This paper describes system design and experiments to evaluate the surgeon’s functional workspace and accuracy using the robot. Phantom and cadaver experiments demonstrate successful completion of the target procedure via prostate lobe resection. PMID:27570361

  11. An efficient solid modeling system based on a hand-held 3D laser scan device

    NASA Astrophysics Data System (ADS)

    Xiong, Hanwei; Xu, Jun; Xu, Chenxi; Pan, Ming

    2014-12-01

    The hand-held 3D laser scanner sold in the market is appealing for its port and convenient to use, but price is expensive. To develop such a system based cheap devices using the same principles as the commercial systems is impossible. In this paper, a simple hand-held 3D laser scanner is developed based on a volume reconstruction method using cheap devices. Unlike convenient laser scanner to collect point cloud of an object surface, the proposed method only scan few key profile curves on the surface. Planar section curve network can be generated from these profile curves to construct a volume model of the object. The details of design are presented, and illustrated by the example of a complex shaped object.

  12. Hand-held cow horn: resurgence of an old arm or apotential terrorist weapon

    PubMed Central

    Khalid, Lawal; Ahmed, Adamu

    2012-01-01

    Abstract: A 23 year old man presented with intestinal evisceration from stab injury to the left side of the abdomen with a hand-held cow horn at a local night party. He complained of severe abdominal pain and bleeding at the site of injury. He was hemodynamically stable. At emergency exploration, the eviscerated bowel was viable with no adjacent mesenteric tear. Other intra abdominal organs were normal. The eviscerated bowel was lavaged and reduced into the abdomen through the 7cm anterior abdominal wall laceration. The laceration was repaired and abdomen closed in layers. Post operative recovery was uneventful. The hand-held cow horn can easily be concealed and may pass through security checks undetected. It should be added to the ever increasing list of weapons of small scale terror. PMID:21502787

  13. System design of a hand-held mobile robot for craniotomy.

    PubMed

    Kane, Gavin; Eggers, Georg; Boesecke, Robert; Raczkowsky, Jörg; Wörn, Heinz; Marmulla, Rüdiger; Mühling, Joachim

    2009-01-01

    This contribution reports the development and initial testing of a Mobile Robot System for Surgical Craniotomy, the Craniostar. A kinematic system based on a unicycle robot is analysed to provide local positioning through two spiked wheels gripping directly onto a patients skull. A control system based on a shared control system between both the Surgeon and Robot is employed in a hand-held design that is tested initially on plastic phantom and swine skulls. Results indicate that the system has substantially lower risk than present robotically assisted craniotomies, and despite being a hand-held mobile robot, the Craniostar is still capable of sub-millimetre accuracy in tracking along a trajectory and thus achieving an accurate transfer of pre-surgical plan to the operating room procedure, without the large impact of current medical robots based on modified industrial robots.

  14. Hand-held cow horn: resurgence of an old arm or a potential terrorist weapon.

    PubMed

    Khalid, Lawal; Ahmed, Adamu

    2012-01-01

    A 23 year old man presented with intestinal evisceration from stab injury to the left side of the abdomen with a hand-held cow horn at a local night party. He complained of severe abdominal pain and bleeding at the site of injury. He was hemodynamically stable. At emergency exploration, the eviscerated bowel was viable with no adjacent mesenteric tear. Other intra abdominal organs were normal. The eviscerated bowel was lavaged and reduced into the abdomen through the 7 cm anterior abdominal wall laceration. The laceration was repaired and abdomen closed in layers. Post operative recovery was uneventful. The hand-held cow horn can easily be concealed and may pass through security checks undetected. It should be added to the ever increasing list of weapons of small scale terror.

  15. Early Childhood Vision Screening in Hawai'i Utilizing a Hand-Held Screener.

    PubMed

    Chang, Duane A; Ede, Roger C; Chow, Dominic C; Souza, Ryan D; Gangcuangco, Louie Mar A; Hanks, Nancy; Nakamoto, Beau K; Mitchell, Brooks; Masutani, Alison T; Fisk, Sam; Shikuma, Cecilia M; Dill, Jan E

    2015-09-01

    The goal of early childhood vision screening is to detect subnormal vision and amblyopic risk factors that threaten visual development so that treatment can be initiated early to yield the highest benefit. Hand-held, portable, instrument-based vision screening devices can be used in children as young as 6 months of age. We assessed the feasibility of hand-held photoscreeners to screen for vision disorders in pre-school children in Hawai'i. A total of 137 preschool children on O'ahu in the "Tutu and Me"/Partners in Development program were screened at 6 different locations using the Plusoptix S12 hand-held photoscreener. Once technical issues were resolved, screening was fast and well tolerated. Possible vision abnormalities were found in 11 of the 137 children (8%). Poor compliance for follow-up with formal vision examination limited our ability to confirm these abnormalities. We conclude that photoscreening has the potential to facilitate early childhood vision screening in Hawai'i. The optimal referral criteria for use in Hawai'i will need to be determined after considering the age of the screening population and the available medical resources in Hawai'i. Early detection of treatable eye disorders has far-reaching benefits for the visual development and long term health and well-being of children. A comprehensive early childhood vision screening program in Hawai'i utilizing automated hand-held photoscreeners may have public health value. Such a program should integrate referral to an eye care professional for confirmation and management of vision disorders of at-risk children found on screening. PMID:26468424

  16. Hand-held calculator programs determine natural-gas physical properties

    SciTech Connect

    Ajitsaria, N.K.

    1983-06-01

    Although physical properties of natural gas are readily available in the literature, the determination of such properties using a hand-held calculator can be of great convenience to the engineer. Two typical examples of gas properties often required in gas transmission and reservoir engineering calculations are compressibility factor (z factor) and viscosity (..mu..). In this article, programs developed for determining these properties are described.

  17. Early Childhood Vision Screening in Hawai‘i Utilizing a Hand-Held Screener

    PubMed Central

    Chang, Duane A; Ede, Roger C; Chow, Dominic C; Souza, Ryan D; Gangcuangco, Louie Mar A; Hanks, Nancy; Nakamoto, Beau K; Mitchell, Brooks; Masutani, Alison T; Fisk, Sam; Dill, Jan E

    2015-01-01

    The goal of early childhood vision screening is to detect subnormal vision and amblyopic risk factors that threaten visual development so that treatment can be initiated early to yield the highest benefit. Hand-held, portable, instrument-based vision screening devices can be used in children as young as 6 months of age. We assessed the feasibility of hand-held photoscreeners to screen for vision disorders in pre-school children in Hawai‘i. A total of 137 preschool children on O‘ahu in the “Tutu and Me”/Partners in Development program were screened at 6 different locations using the Plusoptix S12 hand-held photoscreener. Once technical issues were resolved, screening was fast and well tolerated. Possible vision abnormalities were found in 11 of the 137 children (8%). Poor compliance for follow-up with formal vision examination limited our ability to confirm these abnormalities. We conclude that photoscreening has the potential to facilitate early childhood vision screening in Hawai‘i. The optimal referral criteria for use in Hawai‘i will need to be determined after considering the age of the screening population and the available medical resources in Hawai‘i. Early detection of treatable eye disorders has far-reaching benefits for the visual development and long term health and well-being of children. A comprehensive early childhood vision screening program in Hawai‘i utilizing automated hand-held photoscreeners may have public health value. Such a program should integrate referral to an eye care professional for confirmation and management of vision disorders of at-risk children found on screening. PMID:26468424

  18. Planning of directionally drilled wells in the offshore Wilmington field using the hand-held calculator

    SciTech Connect

    Clark, D.D.; Barth, J.W.

    1983-02-01

    As of July 1982, 901 wells have been directionally drilled in the Long Beach Unit of the East Wilmington Field from 4 man-made islands and land based drilling sites. As more wells are added to each site the planning of new well courses has become more complex. The hand held calculator with Long Beach Unit developed programs has been an aid in laying out new wells which will avoid existing cased boreholes.

  19. Gen-2 Hand-Held Optical Imager towards Cancer Imaging: Reflectance and Transillumination Phantom Studies

    PubMed Central

    Gonzalez, Jean; Roman, Manuela; Hall, Michael; Godavarty, Anuradha

    2012-01-01

    Hand-held near-infrared (NIR) optical imagers are developed by various researchers towards non-invasive clinical breast imaging. Unlike these existing imagers that can perform only reflectance imaging, a generation-2 (Gen-2) hand-held optical imager has been recently developed to perform both reflectance and transillumination imaging. The unique forked design of the hand-held probe head(s) allows for reflectance imaging (as in ultrasound) and transillumination or compressed imaging (as in X-ray mammography). Phantom studies were performed to demonstrate two-dimensional (2D) target detection via reflectance and transillumination imaging at various target depths (1–5 cm deep) and using simultaneous multiple point illumination approach. It was observed that 0.45 cc targets were detected up to 5 cm deep during transillumination, but limited to 2.5 cm deep during reflectance imaging. Additionally, implementing appropriate data post-processing techniques along with a polynomial fitting approach, to plot 2D surface contours of the detected signal, yields distinct target detectability and localization. The ability of the gen-2 imager to perform both reflectance and transillumination imaging allows its direct comparison to ultrasound and X-ray mammography results, respectively, in future clinical breast imaging studies. PMID:22438743

  20. Hand-held resonance sensor for tissue stiffness measurements—a theoretical and experimental analysis

    NASA Astrophysics Data System (ADS)

    Jalkanen, Ville

    2010-05-01

    A piezoelectric transducer in a feedback circuit operating in a resonance state is the basis of a resonance sensor. Upon contact with a soft object a change in the resonance frequency reflects the acoustic impedance. Together with force measurement it is possible to obtain the elastic stiffness of the object. The aim of this study was to evaluate the concept of a hand-held resonance sensor for tissue stiffness measurement. A time derivative analysis of the force and the frequency change showed that a stiffness-sensitive parameter was independent of the impression speed. Soft tissue phantoms of gelatin were used in an experimental validation of the theory. A force indentation method was used as a reference method for assessing the gelatin's elastic stiffness. Results from the hand-held measurements showed that the stiffness parameter accurately measured the elastic stiffness of the gelatin (R2 = 0.94, p < 0.05). The stiffness parameter was weakly (on average R2 = 0.15) and non-significantly (p > 0.05, 14 out of 17) dependent on an impression speed parameter. On average, a small amount of the total variance was explained by the impression speed. In conclusion, soft tissue stiffness can be objectively measured with free-hand measurement with a resonance sensor. This study contributes a theoretical analysis and an experimental demonstration of the concept of a hand-held resonance sensor for stiffness measurements.

  1. Noise reduction techniques in the design of a pneumatic-driven hand held power tool

    NASA Astrophysics Data System (ADS)

    Skinner, Christian M.

    2005-09-01

    Pneumatic-driven hand-held power tools generate noise in the workplace. Current legislation in Europe and the USA aims at protecting workers against noise exposure. In the United States, the Occupational Safety and Health Administration (OSHA) requires that employers create a hearing conservation program if the noise exposure exceeds 85 dB(A). In the European Community under the Directive 2003/10/EC, employers are required to provide hearing protection if the noise exposure within the working environment exceeds 80 dB(A) and must require hearing protection to be worn if the noise exposure exceeds 85 dB(A). This paper examines the sources of noise which contribute to the overall noise from a hand-held power tool. A test plan was developed to identify these individual sources of noise and to determine if structure-borne noise or airborne noise is the dominant source relative to the overall noise level. The measurements were performed per International Standards Organization (ISO) 15744. This paper will describe the methodology used to identify the noise sources and reduce the overall noise of a hand-held power tool.

  2. Applications of a hand-held GPS receiver in South American rain forests

    NASA Technical Reports Server (NTRS)

    Baksh, Michael

    1991-01-01

    A hand-held Global Positioning System receiver was used to determine the precise locations of villages, houses, gardens, and other cultural and environmental features in poorly mapped South American rain forests. The Magellan NAV 1000 unit profides extremely accurate latitude and longitude information, but determination of altitude is problematical. Overall, the receiver effectively allows anthropologists to obtain essential locational data useful for categorizing land uses, mapping tribal boundaries, and other applications in regions where environmental conditions are harsh and/or accessibility is difficult.

  3. Environmental applications of hand-held photography taken from the space shuttle

    SciTech Connect

    Muehlberger, W.R.

    1996-07-01

    Astronauts have been taking photographs of earth since 1965, years before unmanned satellites began systematic coverage. The trained eye of an intelligent observer permits the rapid identification of a feature or an anomaly so that it can be the central focus of the photograph, rather than one of an endless stream of information from an unmanned satellite through which the interpreter has to sort and pick. This paper describes some of the environmental uses of hand-held photography since the launch of the first Space Shuttle in April, 1981.

  4. Rapid Diagnosis of an Ulnar Fracture with Portable Hand-Held Ultrasound

    NASA Technical Reports Server (NTRS)

    Kirkpatrick, Andrew W.; Brown, Ross; Diebel, Lawrence N.; Nicolaou, Savvas; Marshburn, Tom; Dulchavsky, Scott A.

    2002-01-01

    Orthopedic fractures are a common injury in operational activities, injuries that often occur in isolated or hostile environments. Clinical ultrasound devices have become more user friendly and lighter allowing them to be easily transported with forward medical teams. The bone-soft tissue interface has a very large acoustic impedance, with a high reflectance that can be used to visualize breaks in contour including fractures. Herein reported is a case of an ulnar fracture that was quickly visualized in the early phase of a multi-system trauma resuscitation with a hand-held ultrasound device. The implications for operational medicine are discussed.

  5. Curvelet filter based prescreener for explosive hazard detection in hand-held ground penetrating radar

    NASA Astrophysics Data System (ADS)

    White, Julie L.; Anderson, Derek T.; Ball, John E.; Parker, Brian

    2016-05-01

    Explosive hazards, above and below ground, are a serious threat to civilians and soldiers. In an attempt to mitigate these threats, different forms of explosive hazard detection (EHD) exist; e.g., multi-sensor hand-held platforms, downward looking and forward looking vehicle mounted platforms, etc. Robust detection of these threats resides in the processing and fusion of different data from multiple sensing modalities, e.g., radar, infrared, electromagnetic induction (EMI), etc. Herein, we focus on a new energy-based prescreener in hand-held ground penetrating radar (GPR). First, we Curvelet filter B-scan signal data using either Reverse-Reconstruction followed by Enhancement (RRE) or selectivity with respect to wedge information in the Curvelet transform. Next, we aggregate the result of a bank of matched filters and run a size contrast filter with Bhattacharyya distance. Alarms are then combined using weighted mean shift clustering. Results are demonstrated in the context of receiver operating characteristics (ROC) curve performance on data from a U. S. Army test site that contains multiple target and clutter types, burial depths and times of the day.

  6. Hand-held optoacoustic probe for three-dimensional imaging of human morphology and function

    NASA Astrophysics Data System (ADS)

    Deán-Ben, X. Luís.; Razansky, Daniel

    2014-03-01

    We report on a hand-held imaging probe for real-time optoacoustic visualization of deep tissues in three dimensions. The proposed solution incorporates a two-dimensional array of ultrasonic sensors densely distributed on a spherical surface, whereas illumination is performed coaxially through a cylindrical cavity in the array. Visualization of three-dimensional tomographic data at a frame rate of 10 images per second is enabled by parallel recording of 256 time-resolved signals for each individual laser pulse along with a highly efficient GPUbased real-time reconstruction. A liquid coupling medium (water), enclosed in a transparent membrane, is used to guarantee transmission of the optoacoustically generated waves to the ultrasonic detectors. Excitation at multiple wavelengths further allows imaging spectrally distinctive tissue chromophores such as oxygenated and deoxygenated haemoglobin. The performance is showcased by video-rate tracking of deep tissue vasculature and three-dimensional measurements of blood oxygenenation in a healthy human volunteer. The flexibility provided by the hand-held hardware design, combined with the real-time operation, makes the developed platform highly usable for both small animal research and clinical imaging in multiple indications, including cancer, inflammation, skin and cardiovascular diseases, diagnostics of lymphatic system and breast

  7. Stabilized, hand-held, gamma-ray verification instrument for special nuclear materials

    SciTech Connect

    Fehlau, P.E.; Wiig, G.

    1988-01-01

    For many years, Los Alamos has developed intelligent, hand-held, search instruments for use by non-specialists to search for special nuclear materials (SNM). The instruments sense SNM by detecting its emitted radiation with scintillation detectors monitored by digital alarm circuitry. Now, we have developed a new hand-held instrument that can verify the presence or absence of particular radioisotopes by analyzing gamma-ray spectra. The new instrument is similar to recent, microprocessor-based, search instruments, but has LED detector stabilization, three adjustable regions-of-interest, and additional operating programs for spectrum analysis. We call the new instrument an SNM verification instrument. Its spectrum analysis capability can verify the presence or absence of specific plutonium isotopes in containers or verify the presence of uranium and its enrichment. The instrument retains the search capability, light weight, and low-power requirement of its predecessors. Its ready portability, detector stabilization, and simple operation allow individuals with little technical training to verify the contents of SNM containers. 5 refs., 5 figs.

  8. Finger tracking for hand-held device interface using profile-matching stereo vision

    NASA Astrophysics Data System (ADS)

    Chang, Yung-Ping; Lee, Dah-Jye; Moore, Jason; Desai, Alok; Tippetts, Beau

    2013-01-01

    Hundreds of millions of people use hand-held devices frequently and control them by touching the screen with their fingers. If this method of operation is being used by people who are driving, the probability of deaths and accidents occurring substantially increases. With a non-contact control interface, people do not need to touch the screen. As a result, people will not need to pay as much attention to their phones and thus drive more safely than they would otherwise. This interface can be achieved with real-time stereovision. A novel Intensity Profile Shape-Matching Algorithm is able to obtain 3-D information from a pair of stereo images in real time. While this algorithm does have a trade-off between accuracy and processing speed, the result of this algorithm proves the accuracy is sufficient for the practical use of recognizing human poses and finger movement tracking. By choosing an interval of disparity, an object at a certain distance range can be segmented. In other words, we detect the object by its distance to the cameras. The advantage of this profile shape-matching algorithm is that detection of correspondences relies on the shape of profile and not on intensity values, which are subjected to lighting variations. Based on the resulting 3-D information, the movement of fingers in space from a specific distance can be determined. Finger location and movement can then be analyzed for non-contact control of hand-held devices.

  9. Hand-Held Sunphotometers for High School Student Construction and Measuring Aerosol Optical Thickness

    NASA Technical Reports Server (NTRS)

    Almonor, Linda; Baldwin, C.; Craig, R.; Johnson, L. P.

    2000-01-01

    Science education is taking the teaching of science from a traditional (lecture) approach to a multidimensional sense-making approach which allows teachers to support students by providing exploratory experiences. Using projects is one way of providing students with opportunities to observe and participate in sense-making activity. We created a learning environment that fostered inquiry-based learning. Students were engaged in a variety of Inquiry activities that enabled them to work in cooperative planning teams where respect for each other was encouraged and their ability to grasp, transform and transfer information was enhanced. Summer, 1998: An air pollution workshop was conducted for high school students in the Medgar Evers College/Middle College High School Liberty Partnership Summer Program. Students learned the basics of meteorology: structure and composition of the atmosphere and the processes that cause weather. The highlight of this workshop was the building of hand-held sunphotometers, which measure the intensity of the sunlight striking the Earth. Summer, 1999: high school students conducted a research project which measured the mass and size of ambient particulates and enhanced our ability to observe through land based measurements changes in the optical depth of ambient aerosols over Brooklyn. Students used hand held Sunphotometers to collect data over a two week period and entered it into the NASA GISS database by way of the internet.

  10. Migration and interpolation for the hand-held GPR MD sensor system (ALIS)

    NASA Astrophysics Data System (ADS)

    Feng, Xuan; Kobayashi, Takao; Takahashi, Kazunori; Fujiwara, Jun; Sato, Motoyuki

    2006-05-01

    We developed a hand-held landmine detection sensor system, ALIS (Advanced Landmine Imaging System), combined with a metal detector and GPR (Ground penetrating radar). The system has a CCD camera attached on the sensor handle and can record the MD and GPR signal with the sensor position information. Therefore, it can offer the visual MD image and GPR image, which is used to define targets. But because ALIS is a hand-held system, the sensor position is random when it is operated in the field by human being. Also GPR normally suffers from very strong clutter. To deal with these problems, the interpolation is a common choice for both MD and GPR to create grid data set firstly and migration was used to improve the quality of GPR image. But generally the interpolation can not improve the quality of data set, although it can offer grid data set for visualization. Also for 3D GPR data set, it will consume much processing time. In fact, the migration can not only improve the quality of GPR data but also interpolate data to offer grid data set. It is a kind of 2.5D interpolation and just uses related data in the diffraction trajectory surface. So it can offer directly the visual GPR image and save the processing time. We will discuss two procedures for GPR, interpolation + migration or only migration, in this paper. Lastly, we also will report some results of evaluation test in 2006 February in Croatia.

  11. Development of a hand-held GPR MD sensor system (ALIS)

    NASA Astrophysics Data System (ADS)

    Sato, Motoyuki; Fujiwara, Jun; Feng, Xuan; Zhou, Zheng-Shu; Kobayashi, Takao

    2005-06-01

    ALIS (Advanced Landmine Imaging System), which is a novel landmine detection sensor system combined with a metal detector and GPR, was developed. This is a hand-held equipment, which has a sensor position tracking system, and can visualize the sensor output in real time on a head-mounted PC display. In order to achieve the sensor tracking system, ALIS needs only one CCD camera attached on the sensor handle. The new hand-held system ALIS is a very compact and do not require any additional sensor for sensor position tracking. The acquired signal from the metal detector and GPR is displayed on the PC display on real time, and the sensor trace can be checked by the operator. At the same time, the operator can visually recognize the signal on the same display. The CCD captured image is superimposed with the GPR and metal detector signal, therefore the detection and identification of buried targets is quite easy and reliable. Field evaluation test of ALIS was conducted in Afghanistan, and we demonstrated that it can detect buried antipersonnel landmines, and can also discriminate metal fragments from landmines.

  12. Imaging algorithm of a hand-held GPR MD sensor system (ALIS)

    NASA Astrophysics Data System (ADS)

    Feng, Xuan; Fujiwara, Jun; Zhou, Zheng-shu; Kobayashi, Takao; Sato, Motoyuki

    2005-06-01

    We are developing a new landmine detection system, called advanced landmine imaging system (ALIS), which is equipped with metal detector (MD) and ground penetrating radar (GPR). Although this is a hand-held system, we can record the MD and GPR signal with the sensor position information acquired by CCD camera. Therefore, 2D MD image and 3D GPR image are possible after signal processing. But because ALIS is a hand-held system, the sensor position is random when it is operated in the field. So interpolation processing is used to deal with the problem and offer grid data set for both MD and GPR. Good MD image can be achieved after interpolation. Also, interpolation can prepare good data set for migration to get good horizontal slice image. After interpolation, 3D diffraction stacking migration with migration aperture is used to refocus the scattered signals and enhance the signal-clutter ratio for reconstructed good GPR image. The ALIS was tested in Afghanistan in December 2004 and could achieve good landmine image. Especially, GPR could obtain good image of anti-person (AP) mine buried at more than 20cm depth. Also MD image and GPR image could combine to distinguish mine from metal fragment.

  13. Algorithms for a hand-held miniature x-ray fluorescence analytical instrument

    SciTech Connect

    Elam, W.T.; Newman, D.; Ziemba, F.

    1998-12-31

    The purpose of this joint program was to provide technical assistance with the development of a Miniature X-ray Fluorescence (XRF) Analytical Instrument. This new XRF instrument is designed to overcome the weaknesses of spectrometers commercially available at the present time. Currently available XRF spectrometers (for a complete list see reference 1) convert spectral information to sample composition using the influence coefficients technique or the fundamental parameters method. They require either a standard sample with composition relatively close to the unknown or a detailed knowledge of the sample matrix. They also require a highly-trained operator and the results often depend on the capabilities of the operator. In addition, almost all existing field-portable, hand-held instruments use radioactive sources for excitation. Regulatory limits on such sources restrict them such that they can only provide relatively weak excitation. This limits all current hand-held XRF instruments to poor detection limits and/or long data collection times, in addition to the licensing requirements and disposal problems for radioactive sources. The new XRF instrument was developed jointly by Quantrad Sensor, Inc., the Naval Research Laboratory (NRL), and the Department of Energy (DOE). This report describes the analysis algorithms developed by NRL for the new instrument and the software which embodies them.

  14. Hand-held digital books in radiology: convenient access to information.

    PubMed

    D'Alessandro, M P; Galvin, J R; Santer, D M; Erkonen, W E

    1995-02-01

    Radiologists need constant, convenient access to current information throughout the course of their daily work. Today most learning in radiology is obtained from the printed word in books, journals, and teaching files, supplemented by the spoken word in lectures and conferences. Although learning from printed material and lectures has been proved efficacious over time, these media share the disadvantage of not being conveniently available for reference during the course of daily work at the alternator or in the examination room when accurate and up-to-date information is needed the most. As a result, many important questions about patient care go unanswered. We have developed a technique--hand-held digital books--to lower this barrier to searching and retrieval. When radiologists have a digital library that can be carried with them, they will be able to incorporate current radiology information into their daily decision making. We describe a technique for creating hand-held digital books and their future use in radiology.

  15. Neurosurgical hand-held optical coherence tomography (OCT) forward-viewing probe

    NASA Astrophysics Data System (ADS)

    Sun, Cuiru; Lee, Kenneth K. C.; Vuong, Barry; Cusimano, Michael; Brukson, Alexander; Mariampillai, Adrian; Standish, Beau A.; Yang, Victor X. D.

    2012-02-01

    A prototype neurosurgical hand-held optical coherence tomography (OCT) imaging probe has been developed to provide micron resolution cross-sectional images of subsurface tissue during open surgery. This new ergonomic hand-held probe has been designed based on our group's previous work on electrostatically driven optical fibers. It has been packaged into a catheter probe in the familiar form factor of the clinically accepted Bayonet shaped neurosurgical non-imaging Doppler ultrasound probes. The optical design was optimized using ZEMAX simulation. Optical properties of the probe were tested to yield an ~20 um spot size, 5 mm working distance and a 3.5 mm field of view. The scan frequency can be increased or decreased by changing the applied voltage. Typically a scan frequency of less than 60Hz is chosen to keep the applied voltage to less than 2000V. The axial resolution of the probe was ~15 um (in air) as determined by the OCT system. A custom-triggering methodology has been developed to provide continuous stable imaging, which is crucial for clinical utility. Feasibility of this probe, in combination with a 1310 nm swept source OCT system was tested and images are presented to highlight the usefulness of such a forward viewing handheld OCT imaging probe. Knowledge gained from this research will lay the foundation for developing new OCT technologies for endovascular management of cerebral aneurysms and transsphenoidal neuroendoscopic treatment of pituitary tumors.

  16. Self-Contained, Hand-held, Optical Waveguide, Chemical Sensor System

    SciTech Connect

    R. J. Pollina

    1998-11-01

    A self-contained, hand-held, optical waveguide, chemical detection system has been built to detect and quantify gases and vapors. The system uses a hybrid integrated circuit (IC) containing optical waveguides coated with sensing chemistry as the optical platform. The IC with sensing chemistry is available commercially under the name Sensor-on-a-Chip. This IC is mounted in a small, uniquely designed sample chamber where the measured analyte is identified by the sensing chemistry and biochemistry. Continuous or stop-flow sampling is possible. Sensitivities in the low parts-per-million have been attained for hydrocarbons and alcohol. Analyte coverage is only limited by the sensing chemistries and biochemistries that are available.

  17. Cost effective spectral sensor solutions for hand held and field applications

    NASA Astrophysics Data System (ADS)

    Reetz, Edgar; Correns, Martin; Notni, Gunther

    2015-05-01

    Optical spectroscopy is without doubt one of the most important non-contact measurement principles. It is used in a wide range of applications from bio-medical to industrial fields. One recent trend is to miniaturize spectral sensors to address new areas of application. The most common spectral sensor type is based on diffraction gratings, while other types are based on micro mechanical systems (MEMS) or filter technologies. The authors represent the opinion that there is a potentially wide spread field of applications for spectrometers, but the market limits the range of applications since they cannot keep up with targeted cost requirements for consumer products. The present article explains an alternative approach for miniature multichannel spectrometer to enhance robustness for hand held field applications at a cost efficient price point.

  18. Read-only-memory pipelay analysis module written for hand-held computer

    SciTech Connect

    Mousselli, A.H.

    1985-06-10

    Complex offshore pipelay computer analysis has until now required large computers and time-consuming inputs. Accurate results were only available with large office computers. Now a technique for such analysis, using a memory module for Hewlett Packard HP-41 series hand-held computers, has been developed. The custom read-only-memory (ROM) module, SEAPIPE, performs analyses of offshore pipeline installations by conventional ''S-curve'' and vertical ''J-curve'' methods. The analyses include tension and stringer requirements, pipe spans, and maximum stresses. Results of the program have been compared to results of mainframe computer solutions, which include wide ranges of water depth, tension, and pipe sizes. This article describes the pipelaying analysis, the module, and solutions. Typical pipelay solutions using the module are also provided. And solutions which aid the user during various project needs are illustrated and discussed.

  19. Hand-held dual-sensor ALIS and its evaluation tests

    NASA Astrophysics Data System (ADS)

    Sato, Motoyuki; Takahashi, Kazunori

    2008-04-01

    Since 2002, our research group at Tohoku University has developed a new hand-held land mine detection dual-sensor ALIS. ALIS is equipped with a metal detector and a GPR, and it has a sensor tracking system, which can record the GPR and Metal detector signal with its location. It makes possible to process the data afterwards, including migration. The migration processing drastically increases the quality of the image of the buried objects. ALIS evaluation test was conducted in Croatia in October 2007. Then after, we stared a half-year evaluation test of ALIS in QC test in Croatia in December 2007. This test will be conducted in various soil and environmental conditions in Croatia.

  20. Rapid Visuomotor Corrective Responses during Transport of Hand-Held Objects Incorporate Novel Object Dynamics.

    PubMed

    Diamond, Jonathan S; Nashed, Joseph Y; Johansson, Roland S; Wolpert, Daniel M; Flanagan, J Randall

    2015-07-22

    Numerous studies have shown that people are adept at learning novel object dynamics, linking applied force and motion, when performing reaching movements with hand-held objects. Here we investigated whether the control of rapid corrective arm responses, elicited in response to visual perturbations, has access to such newly acquired knowledge of object dynamics. Participants first learned to make reaching movements while grasping an object subjected to complex load forces that depended on the distance and angle of the hand from the start position. During a subsequent test phase, we examined grip and load force coordination during corrective arm movements elicited (within ∼150 ms) in response to viewed sudden lateral shifts (1.5 cm) in target or object position. We hypothesized that, if knowledge of object dynamics is incorporated in the control of the corrective responses, grip force changes would anticipate the unusual load force changes associated with the corrective arm movements so as to support grasp stability. Indeed, we found that the participants generated grip force adjustments tightly coupled, both spatially and temporally, to the load force changes associated with the arm movement corrections. We submit that recently learned novel object dynamics are effectively integrated into sensorimotor control policies that support rapid visually driven arm corrective actions during transport of hand held objects. Significance statement: Previous studies have demonstrated that the motor system can learn, and make use of, internal models of object dynamics to generate feedforward motor commands. However, it is not known whether such internal models are incorporated into rapid, automatic arm movement corrections that compensate for errors that arise during movement. Here we demonstrate, for the first time, that internal models of novel object dynamics are integrated into rapid corrective arm movements made in response to visuomotor perturbations that, importantly, do

  1. An integrated portable hand-held analyser for real-time isothermal nucleic acid amplification.

    PubMed

    Smith, Matthew C; Steimle, George; Ivanov, Stan; Holly, Mark; Fries, David P

    2007-08-29

    A compact hand-held heated fluorometric instrument for performing real-time isothermal nucleic acid amplification and detection is described. The optoelectronic instrument combines a Printed Circuit Board/Micro Electro Mechanical Systems (PCB/MEMS) reaction detection/chamber containing an integrated resistive heater with attached miniature LED light source and photo-detector and a disposable glass waveguide capillary to enable a mini-fluorometer. The fluorometer is fabricated and assembled in planar geometry, rolled into a tubular format and packaged with custom control electronics to form the hand-held reactor. Positive or negative results for each reaction are displayed to the user using an LED interface. Reaction data is stored in FLASH memory for retrieval via an in-built USB connection. Operating on one disposable 3 V lithium battery >12, 60 min reactions can be performed. Maximum dimensions of the system are 150 mm (h) x 48 mm (d) x 40 mm (w), the total instrument weight (with battery) is 140 g. The system produces comparable results to laboratory instrumentation when performing a real-time nucleic acid sequence-based amplification (NASBA) reaction, and also displayed comparable precision, accuracy and resolution to laboratory-based real-time nucleic acid amplification instrumentation. A good linear response (R2 = 0.948) to fluorescein gradients ranging from 0.5 to 10 microM was also obtained from the instrument indicating that it may be utilized for other fluorometric assays. This instrument enables an inexpensive, compact approach to in-field genetic screening, providing results comparable to laboratory equipment with rapid user feedback as to the status of the reaction. PMID:17719904

  2. Manometric evaluation of oral function with a hand-held balloon probe.

    PubMed

    Tsuga, K; Maruyama, M; Yoshikawa, M; Yoshida, M; Akagawa, Y

    2011-09-01

    Tongue pressure measured with a disposable hand-held balloon probe has been used for assessing tongue function; however, no diagnostic standard for assessing other oral functions exists currently. In this study, to develop a method for multifactorial manometric evaluation of oral functions, 20 men and 20 women (21-32 years of age) were instructed to apply 7-s maximal voluntary muscular effort on a hand-held balloon probe placed against the anterior and lateral parts of the palate, buccal surface of the molars on the habitual chewing side and labial surface of the anterior teeth for measuring anterior and posterior tongue, cheek and lip pressures (LPs), respectively. Intra-session reproducibility was determined by three repeated measurements, and associations between the obtained and the conventional data on oral diadochokinesis were tested. The men exhibited higher values of all the pressure types. Further, both genders showed a positive correlation between anterior and posterior tongue pressures (PTPs) (P < 0·05), but only the women exhibited positive correlations between anterior tongue and cheek pressures, cheek and PTPs, anterior tongue and LPs, and cheek and LPs (P < 0·05). No statistically significant correlation was found between the pressures and the number of syllabic articulations, except between LP and the number of /pa/ articulations in the women (r = 0·524, P < 0·05). In conclusion, the balloon probe method enables objective manometric evaluation of oral functions and could be an effective tool for clinical epidemiological studies and evidence-based decision-making in nursing care.

  3. Hand-held text-to-speech device for the non-vocal disabled.

    PubMed

    Damper, R I; Burnett, J W; Gray, P W; Straus, L P; Symes, R A

    1987-10-01

    A hand-held, battery-powered synthetic speech aid for the non-vocally disabled has been constructed. The device accepts as its input, largely unrestricted text keyed by the user. This is converted by text-to-speech software, based on 349 letter-to-sound rules and some simple rules of continuity, intonation and stress, to appropriate control signals which drive a single-chip (series formant) speech synthesizer. A number of implementation constraints are imposed by portability; the system has, as far as possible, been designed using CMOS components. To extend the time for which the system will operate between battery charges, power saving facilities are incorporated. Hand-held use implies the need for a one-handed keyboard: a unique integral keyboard is used, designed to minimize the visual search time to locate a letter key. Considerable attention has been paid to rule-search strategies, the handling of 'exceptions' which violate the letter-to-sound principle and the resolution of conflicts when more than one rule might apply. The quality and intelligibility of speech from a rule-based system is typically poor, and every effort has been made to improve it. Limits on possible improvement are, however, set by the use of a proprietary single chip synthesizer and by the minimal nature of a portable system. To facilitate the task of composing messages, a two-line liquid crystal display is provided together with a range of editing functions. The display can also be shown to the message receiver should he/she be deaf, or used for silent communication as an analogue to 'whispering'.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2960853

  4. Hand-held tools with complex kinematics are efficiently incorporated into movement planning and online control.

    PubMed

    Baugh, Lee A; Hoe, Erica; Flanagan, J Randall

    2012-10-01

    Certain hand-held tools alter the mapping between hand motion and motion of the tool end point that must be controlled in order to perform a task. For example, when using a pool cue, the motion of the cue tip is reversed relative to the hand. Previous studies have shown that the time required to initiate a reaching movement (Fernandez-Ruiz J, Wong W, Armstrong IT, Flanagan JR. Behav Brain Res 219: 8-14, 2011), or correct an ongoing reaching movement (Gritsenko V, Kalaska JF. J Neurophysiol 104: 3084-3104, 2010), is prolonged when the mapping between hand motion and motion of a cursor controlled by the hand is reversed. Here we show that these time costs can be significantly reduced when the reversal is instantiated by a virtual hand-held tool. Participants grasped the near end of a virtual tool, consisting of a rod connecting two circles, and moved the end point to displayed targets. In the reversal condition, the rod translated through, and rotated about, a pivot point such that there was a left-right reversal between hand and end point motion. In the nonreversal control, the tool translated with the hand. As expected, when only the two circles were presented, movement initiation and correction times were much longer in the reversal condition. However, when full vision of the tool was provided, the reaction time cost was almost eliminated. These results indicate that tools with complex kinematics can be efficiently incorporated into sensorimotor control mechanisms used in movement planning and online control.

  5. Musculoskeletal Disorders of the Upper Extremities Due to Extensive Usage of Hand Held Devices

    PubMed Central

    2014-01-01

    Objective The use of hand held devices (HHD) such as mobile phones, game controls, tablets, portable media players and personal digital assistants have increased dramatically in past decade. While sending a text message or using the controls of the HHD the users need to use their thumb and other palm muscles extensively. The objective of this study was to describe the risk factors and clinical features of the musculoskeletal disorders (MSDs) arising due to usage of hand held devices and to evaluate the effectiveness of a sequenced rehabilitation protocol. Methods A retrospective report analysis of 70 subjects, who were diagnosed to have a MSD affecting the upper extremities, was conducted. Medical charts from a tertiary level rehabilitation centre from 2005–2013 were analysed. All the subjects reported pain in their upper extremities following extensive usage of HHD and were examined and diagnosed to have a MSD by an orthopaedic and rehabilitation physician. After the assessment and diagnosis, all the patients underwent rehabilitation using a sequenced protocol. Results All the subjects reported pain in the thumb and forearm with associated burning, numbness and tingling around the thenar aspect of the hand, and stiffness of wrist and hand. 43 subjects had symptoms on the right side; 9 on left and 18 had bilateral symptoms. Correlation was found between hand dominance and MSD. 33 subjects complained of onset of symptoms following extensive text messaging. All the subjects were diagnosed to have tendinosis of Extensor Pollicis Longus and Myofascial Pain Syndrome affecting the 1st interossei, thenar group of muscles and Extensor Digitorum Communis. 23 of the subjects were senior executives, among these 7 were CEO’s of major multinational companies in India. All the subjects recovered completely following the rehabilitation. Conclusions The study concluded that mobile phones and gadgets that promoted the predominant usage of thumb or only one finger while texting

  6. A new hand-held optical reflectometer to measure enamel erosion: correlation with surface hardness and calcium release

    PubMed Central

    Carvalho, Thiago Saads; Baumann, Tommy; Lussi, Adrian

    2016-01-01

    In the present study, the surface reflection intensity (SRI) was measured from enamel with different induced erosion degrees using a hand-held pen-size reflectometer (Hand-Held) and a Table-Top reflectometer. To validate the Hand-Held reflectometer, we correlated its optical signals with the change of surface microhardness (SMH), and amount of calcium released from the enamel samples during erosion. We used 124 tooth enamel specimens that were exposed to an erosive challenge of either 1, 2, 4, 6, 8, or 10 minutes. SRI and SMH were measured before and after the erosive challenge and we also measured the amount of calcium released to the citric acid. Relative SRI loss (rSRIloss) and relative SMH loss (rSMHloss) were calculated. rSRIloss from the Hand-Held and the Table-Top reflectometers were similar and significantly correlated to rSMHloss and calcium release. The regression analyses showed a significant association between rSRIloss from both reflectometers and rSMHloss and calcium, showing that both reflectometers can be used to measure erosive demineralization of enamel. The Hand-Held reflectometer is capable of assessing in vitro erosion, correlating to other commonly used methods. It is small, easy to handle and provides fast measurement, being a possible candidate to measure erosion in clinical studies. PMID:27121129

  7. Comparative assessment of knee extensor and flexor muscle strength measured using a hand-held vs. isokinetic dynamometer

    PubMed Central

    Muff, Guillaume; Dufour, Stéphane; Meyer, Alain; Severac, François; Favret, Fabrice; Geny, Bernard; Lecocq, Jehan; Isner-Horobeti, Marie-Eve

    2016-01-01

    [Purpose] To compare measurements of knee extensor and flexor muscle strength performed using a hand-held dynamometer and an isokinetic dynamometer in apparently healthy subjects. [Subjects and Methods] Thirty adult volunteers underwent knee muscle strength evaluation using an isokinetic or a hand-held dynamometer. [Results] Strong positive correlations were found between the 2 methods, with correlation coefficients r ranging from 0.72 (95% confidence interval [CI], 0.48−0.86) to 0.87 (95% CI, 0.75−0.94), depending on the muscle group and the isokinetic evaluation mode. The reproducibility of the hand-held dynamometer findings was good, judged by a coefficient of variation of 3.2–4.2%. However, the correlation between the 2 methods for the assessment of flexor/extensor ratios ranged from −0.04 to 0.46. [Conclusion] Knee extensor and flexor muscle strength recorded with a hand-held dynamometer is reproducible and significantly correlated with the isokinetic values, indicating that this method may in some cases be a useful replacement for isokinetic strength measurement. However, for strength ratio assessment, and when judged against the isokinetic standard, a hand-held dynamometer is not a valid option. PMID:27799667

  8. Numerical analysis of gas and micro-particle interactions in a hand-held shock-tube device.

    PubMed

    Liu, Y; Kendall, M A F

    2006-12-01

    A unique hand-held gene gun is employed for ballistically delivering biomolecules to key cells in the skin and mucosa in the treatment of the major diseases. One of these types of devices, called the Contoured Shock Tube (CST), delivers powdered micro-particles to the skin with a narrow and highly controllable velocity distribution and a nominally uniform spatial distribution. In this paper, we apply a numerical approach to gain new insights in to the behavior of the CST prototype device. The drag correlations proposed by Henderson (1976), Igra and Takayama (1993) and Kurian and Das (1997) were applied to predict the micro-particle transport in a numerically simulated gas flow. Simulated pressure histories agree well with the corresponding static and Pitot pressure measurements, validating the CFD approach. The calculated velocity distributions show a good agreement, with the best prediction from Igra & Takayama correlation (maximum discrepancy of 5%). Key features of the gas dynamics and gas-particle interaction are discussed. Statistic analyses show a tight free-jet particle velocity distribution is achieved (570 +/- 14.7 m/s) for polystyrene particles (39 +/- 1 microm), representative of a drug payload. PMID:16917664

  9. Appearance based key-shot selection for a hand held camera

    NASA Astrophysics Data System (ADS)

    Alefs, Bram; Dijk, Judith

    2009-05-01

    Automatic selection of key-shots is an important step for video data processing. Depending on the purpose, key-shot selection provides user feed back on recorded data, storage reduction and viewpoint selection and it can be used for panoramic image stitching and 3D-reconstruction. In particular, investigating scenes of crime or accidental investigations involves large amount of data, containing information on physical arrangement of objects, details on surface geometry and appearances. This paper proposes an efficient method for automatic selection of key-shot, providing onsite feedback on recorded segments and automatic selection of view-points for 3D-reconstruction. It uses appearance based object and scene modeling for a freely moving, hand held camera. The camera motion is determined on two levels, comparing appearances of local image regions and full 3D reconstruction. On the lower level, the 2D-warp between subsequent video frames is used to determine local change of image appearance and derive a set of motion key frames. These keyframes than are used to determine full 3D motion and to reconstruct objects. Furthermore, key-frames are used for fast indexation and detection of loop closures. Examples for automatic key-frame selection are given for an re-enacted crime scene, and compared to manual selection.

  10. Background adaptive division filtering for hand-held ground penetrating radar

    NASA Astrophysics Data System (ADS)

    Lee, Matthew A.; Anderson, Derek T.; Ball, John E.; White, Julie L.

    2016-05-01

    The challenge in detecting explosive hazards is that there are multiple types of targets buried at different depths in a highlycluttered environment. A wide array of target and clutter signatures exist, which makes detection algorithm design difficult. Such explosive hazards are typically deployed in past and present war zones and they pose a grave threat to the safety of civilians and soldiers alike. This paper focuses on a new image enhancement technique for hand-held ground penetrating radar (GPR). Advantages of the proposed technique is it runs in real-time and it does not require the radar to remain at a constant distance from the ground. Herein, we evaluate the performance of the proposed technique using data collected from a U.S. Army test site, which includes targets with varying amounts of metal content, placement depths, clutter and times of day. Receiver operating characteristic (ROC) curve-based results are presented for the detection of shallow, medium and deeply buried targets. Preliminary results are very encouraging and they demonstrate the usefulness of the proposed filtering technique.

  11. Three-dimensional multispectral hand-held optoacoustic imaging with microsecond-level delayed laser pulses

    NASA Astrophysics Data System (ADS)

    Deán-Ben, X. L.; Bay, Erwin; Razansky, Daniel

    2015-03-01

    Three-dimensional hand-held optoacoustic imaging comes with important advantages that prompt the clinical translation of this modality, with applications envisioned in cardiovascular and peripheral vascular disease, disorders of the lymphatic system, breast cancer, arthritis or inflammation. Of particular importance is the multispectral acquisition of data by exciting the tissue at several wavelengths, which enables functional imaging applications. However, multispectral imaging of entire three-dimensional regions is significantly challenged by motion artefacts in concurrent acquisitions at different wavelengths. A method based on acquisition of volumetric datasets having a microsecond-level delay between pulses at different wavelengths is described in this work. This method can avoid image artefacts imposed by a scanning velocity greater than 2 m/s, thus, does not only facilitate imaging influenced by respiratory, cardiac or other intrinsic fast movements in living tissues, but can achieve artifact-free imaging in the presence of more significant motion, e.g., abrupt displacements during handheld-mode operation in a clinical environment.

  12. InfraCAM (trade mark): A Hand-Held Commercial Infrared Camera Modified for Spaceborne Applications

    NASA Technical Reports Server (NTRS)

    Manitakos, Daniel; Jones, Jeffrey; Melikian, Simon

    1996-01-01

    In 1994, Inframetrics introduced the InfraCAM(TM), a high resolution hand-held thermal imager. As the world's smallest, lightest and lowest power PtSi based infrared camera, the InfraCAM is ideal for a wise range of industrial, non destructive testing, surveillance and scientific applications. In addition to numerous commercial applications, the light weight and low power consumption of the InfraCAM make it extremely valuable for adaptation to space borne applications. Consequently, the InfraCAM has been selected by NASA Lewis Research Center (LeRC) in Cleveland, Ohio, for use as part of the DARTFire (Diffusive and Radiative Transport in Fires) space borne experiment. In this experiment, a solid fuel is ignited in a low gravity environment. The combustion period is recorded by both visible and infrared cameras. The infrared camera measures the emission from polymethyl methacrylate, (PMMA) and combustion products in six distinct narrow spectral bands. Four cameras successfully completed all qualification tests at Inframetrics and at NASA Lewis. They are presently being used for ground based testing in preparation for space flight in the fall of 1995.

  13. Initial Usability Testing of a Hand-held Electronic Logbook Prototype for the Human Research Facility

    NASA Technical Reports Server (NTRS)

    Berman, Andrea H.; Whitmore, Mihriban

    1996-01-01

    The Apple(R) Newton(TM) MessagePad 110 was flown aboard the KC-135 reduced gravity aircraft for microgravity usability testing. The Newton served as the initial hand-held electronic logbook prototype for the International Space Station (ISS) Human Research Facility (HRF). Subjects performed three different tasks with the Newton: (1) using the stylus to tap on different sections of the screen in order to launch an application and to select options within it; (2) using the stylus to write, and; (3) correcting handwriting recognition errors in a handwriting-intensive application. Subjects rated handwriting in microgravity 'Borderline' and had great difficulties finding a way in which to adequately restrain themselves at the lower body in order to have their hands free for the Newton. Handwriting recognition was rated 'Unacceptable,' but this issue is hardware-related and not unique to the microgravity environment. It is suggested that the restraint and handwriting issues are related and require further joint research with the current Handheld Electronic Logbook prototype: the Norand Pen*key Model #6300.

  14. Hand-held hyperspectral imager for chemical/biological and environmental applications

    NASA Astrophysics Data System (ADS)

    Hinnrichs, Michele; Piatek, Bob

    2004-03-01

    A small, hand held, battery operated imaging infrared spectrometer, Sherlock, has been developed by Pacific Advanced Technology and was field tested in early 2003. The Sherlock spectral imaging camera has been designed for remote gas leak detection, however, the architecture of the camera is versatile enough that it can be applied to numerous other applications such as homeland security, chemical/biological agent detection, medical and pharmaceutical applications as well as standard research and development. This paper describes the Sherlock camera, theory of operations, shows current applications and touches on potential future applications for the camera. The Sherlock has an embedded Power PC and performs real-time-image processing function in an embedded FPGA. The camera has a built in LCD display as well as output to a standard monitor, or NTSC display. It has several I/O ports, ethernet, firewire, RS232 and thus can be easily controlled from a remote location. In addition, software upgrades can be performed over the ethernet eliminating the need to send the camera back to the factory for a retrofit. Using the USB port a mouse and key board can be connected and the camera can be used in a laboratory environment as a stand alone imaging spectrometer.

  15. Hand-Held Instrument Fights Acne, Tops Over-the-Counter Market

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Tyrell Inc., a Houston-based medical technologies company, was able to access engineering support in redesigning a heating element for a hand-held acne-fighting device through SATOP, NASA's Space Alliance Technology Outreach Program. SATOP put Tyrell in contact with The Boeing Company, which assessed the design and made several major contributions. The product, named Zeno, is now the highest selling over-the-counter medical device for the treatment of acne, and in 2006, Zeno was named the "SATOP Texas, Success Story of the Year." Zeno employs proprietary ClearPoint technology to provide relief of mild to moderate inflammatory acne by delivering a precisely controlled low-level dosage of heat to the blemish, causing the bacteria at the root of more than 90 percent of acne to self-destruct. Within its first year on the market, Zeno was cited by various publications for several awards, including Allure's 2005 "Best of Beauty," Marie Claire's "10 Best Gadgets for Girls," and Popular Science's 2005 "Best of What's New." A variation of the Zeno for use in treating herpetic lesions such as cold sores, by killing the virus that causes them, is currently undergoing FDA trials.

  16. The evaluation test of hand-held dual-sensor ALIS in Croatia and Cambodia

    NASA Astrophysics Data System (ADS)

    Sato, Motoyuki; Takahashi, Kazunori

    2007-04-01

    We are developing a new hand-held land mine detection dual-sensor (ALIS) which is equipped with a metal detector and a GPR. ALIS is equipped with a sensor tracking system, which can record the GPR and Metal detector signal with its location. It makes possible to process the data after the data was acquired, including migration. The migration processing drastically increases the quality of the images of the buried objects. Evaluation test of ALIS has been conducted in several test sites. In February 2006, a one-month evaluation test was conducted in Croatia, and in October- December 2006, a two-month evaluation test was conducted in Croatia. Since the dual-sensor is a new landmine detection sensor, and the conventional evaluation procedure developed for metal detectors cannot directly be applied for the dual sensor. In Croatia, the detection probability was comparable to that by a metal detector operated by local deminers. In addition, we showed that ALIS provides image of buried objects by GPR, which can be used for identification. Therefore, their performances were sufficiently high. Then the test was also conducted in Cambodia. The test was carried out by 2 local deminers independently, which allows studying the influence of different operators and increases the statistical value of the results.

  17. The development of the hand-held dual-sensor ALIS

    NASA Astrophysics Data System (ADS)

    Sato, Motoyuki; Fujiwara, Jun; Takahashi, Kazunori

    2007-04-01

    Since 2002, we have developed a new hand-held land mine detection dual-sensor ALIS. ALIS is equipped with a metal detector and a GPR, and it has a sensor tracking system, which can record the GPR and Metal detector signal with its location. It makes possible to process the data afterwards, including migration. The migration processing drastically increases the quality of the image of the buried objects. The new system, we do not need any standard mark on the ground. Also, ALIS uses two different GPOR systems, including VNA (Vector Network Analyzer) based GPR and an Impulse GPR. VNA based GPR can provide better quality GPR images, although the impulse GPR is faster and light weight. ALIS evaluation tests were held in mine affected courtiers including Afghanistan, Croatia, Egypt and Cambodia. In the two-month evaluation test in Cambodia, ALIS worked without any problem. After some demonstrations and evaluation, we got many useful suggestions. Using these advises, we have modified the ALIS and it is now more easy to use. ALIS will be commercialized in 2007.

  18. Humanitarian multisensor hand-held mine detector: exploitation of ancillary data in GPR processing

    NASA Astrophysics Data System (ADS)

    Crisp, Graeme N.; Hill, Andrew

    2002-08-01

    QinetiQ is developing a hand held Multi-sensor mine detector prototype for humanitarian applications. The sensor consists of a GPR, a metal detector and ancillary sensors. This paper describes how data produced by ancillary sensors can be exploited in order to assist the GPR processing. The GPR consists of a 3x3 array of antennas, and focused images of the volume beneath the sensor are formed by post reception synthetic aperture processing. The mine detector is intended to detect sub surface targets, and an accurate knowledge of the ground surface position relative to the sensor is required. Also the high frequency dielectric constant of the ground medium is required in order to produce focused images. This paper analyses the requirements for good post reception synthetic aperture processing. The accuracy of the ground surface position data and the dielectric constant estimation are determined. A model for soil dielectric constant is used to derive the sensitivity of post reception synthetic aperture processing to unknown soil texture. It is show that for the GPR configuration considered, a wide range of texture variations is tolerable provided the soil moisture can be accurately estimated. Variations in soil composition are also tolerable.

  19. Noise surveys of hand-held pneumatic rock drills in Hong Kong.

    PubMed

    Tah-Chew, T; Keung, W C

    1991-10-01

    A study of the noise generated by hand-held pneumatic rock drills at 15 road works locations in Hong Kong was conducted in 1989. The locations of road construction works were identified over one week period. Sound pressure levels (SPL) and band frequency analysis were measured with the integrated sound level meter at the level of the operator's ears. The sound levels for all 15 operators exceeded the local statutory limit of 90 dBA. The average sound level was 107.4 dBA and the corresponding continuous equivalent level adjusted to 8 hours or L eq (8h) was 104.8 dBA. The sound levels for the octave frequencies from 125 Hertz to 8000 Hertz were all in excess of 90 dBA. Estimates of the risk of developing hearing impairment for conversation speech among the operators were 18% and 42% after 5 and 10 years of exposure, respectively. Although there is adequate statutory control to restrict and reduce the hazards caused by noise at road construction works to the workers and to the public at large, no noise control measures were noted at the work sites and none of the operators used hearing protection. This situation was compounded by the short-term nature of road works and the high mobility of the operators.

  20. From usability requirement to technical specifications for hand-held tools and materials: an applied research in the construction field.

    PubMed

    Duca, Gabriella; Attaianese, Erminia

    2012-01-01

    Literature shows incidence of musculoskeletal disorders in bricklaying workers as well as the relevance of good designed hand-held tools in musculoskeletal disorders prevention. In this framework, it can be supposed that providing usable hand-held tools and material in construction worksites will help to improve bricklayers' working conditions. Here a study is presented aimed at framing a methodology for usability assessment of bricklayers handled objects, in order to provide employers with practical indicators for choosing tools and materials best fitting workers needs, under the effectiveness, efficiency and satisfaction perspective. On the basis of a task analysis, usability requirements for bricklaying hand-held tools and materials have been detailed and related, quantitative and qualitative, technical specifications have been elicited. Theoretical framework and usability assessment methodology are presented and, finally, findings from a field application are discussed.

  1. Simple hand-held metal detectors are an effective means of detecting cardiac pacemakers in the deceased prior to cremation.

    PubMed

    Stone, Jason Lyle; Williams, John; Fearn, Lesley

    2010-05-01

    The hazard of undetected cardiac pacemakers exploding in crematoria is well described. This short report describes the use of an affordable hand-held metal detector to detect cardiac pacemakers. Over the course of a year, the metal detector located 100% of cardiac pacemakers in a district general hospital mortuary. A simple model using pigskin and fat is also used to demonstrate the effectiveness in vitro. Commercially purchased hand-held metal detectors should be used in all mortuaries responsible for detection and removal of cardiac pacemakers prior to cremation.

  2. Utility of hand-held echocardiography in outpatient pediatric cardiology management.

    PubMed

    Riley, Alan; Sable, Craig; Prasad, Aparna; Spurney, Christopher; Harahsheh, Ashraf; Clauss, Sarah; Colyer, Jessica; Gierdalski, Marcin; Johnson, Ashley; Pearson, Gail D; Rosenthal, Joanna

    2014-12-01

    Adult patient series have shown hand-held echocardiography (echo) units (HHE) to be accurate for rapid diagnosis and triage. This is the first study to evaluate the ability of HHE to inform decision making in outpatient pediatric cardiology. New pediatric cardiology patients in outpatient clinics staffed by six pediatric cardiologists (experience 1-17 years) were prospectively enrolled if an echocardiogram (echo) was ordered during their initial visit. After history and physical examination and before a standard echo, the cardiologists performed a bedside HHE examination (GE Vscan 1.7-3.8 MHz), documented findings, and made a clinical decision. Diagnoses and decisions based on HHE were compared with final management after the standard echo. The study enrolled 101 subjects (ages 9 days to 19 years). The cardiologists considered HHE imaging adequate for decision making for 80 of the 101 subjects. For 77 of the 80 subjects with acceptable HHE imaging (68/68 normal and 9/12 abnormal standard echoes), the HHE-based primary diagnoses and decisions agreed with the final management. The sensitivity of HHE was 75 % (95 % confidence interval [CI] 43-94 %) and the positive predictive value 100 % (95 % CI 66-100 %) for pediatric heart disease. The agreement between standard echocardiography and HHE imaging was substantial (κ = 0.82). Excluding one of the least experienced cardiologists, HHE provided the basis for correct cardiac diagnoses and management for all the subjects with acceptable HHE imaging (58/58 normal and 9/9 abnormal echoes). In outpatient pediatric cardiology, HHE has potential as a tool to complement physical examination. Further investigation is needed to evaluate how value improves with clinical experience.

  3. Consumer product safety: Risk assessment of exposure to asbestos emissions from hand-held hair dryers

    NASA Astrophysics Data System (ADS)

    Hallenbeck, William H.

    1981-01-01

    The United States Consumer Product Safety Commission (CPSC) is concerned that consumer exposure to asbestos from consumer products may present an unreasonable risk of injury. Recently, CPSC has obtained agreement by industry to cease production and distribution of hair dryers containing asbestos heat insulation. CPSC intends to broaden its investigation by selecting consumer products containing asbestos for “priority attention.” The Commission does not intend to make quantitative estimates of cancer risks posed by exposure to asbestos fibers in making regulatory decisions. This position may lead to a serious waste of resources for the Commission, industry, and society. The Commission should focus its initial attention on those products for which the release of asbestos is significant enough to cause an unreasonable health risk. To make a risk assessment for a particular use of asbestos, CPSC must acquire or request data on asbestos emissions and define “unreasonable risk to health.” In an attempt to give some meaning to the phrase “risk assessment,” the primary goal of this paper is to present a detailed risk assessment of exposure to asbestos from hand-held hair dryers. Several scenarios of use are presented using various assumptions regarding time of operation, mixing of fibers in a small room, rate of fiber emission, and time of exposure. The worst case analysis of the health risk of exposure to hair dryer emissions is based on several conservative assumptions and shows that the increased number of deaths per year due to respiratory cancer is 4 for the entire United States population. A more representative case analysis shows the increased number of deaths to be on the order of 0.15 per year.

  4. Moving a hand-held object: Reconstruction of referent coordinate and apparent stiffness trajectories

    PubMed Central

    Ambike, Satyajit; Zhou, Tao; Zatsiorsky, Vladimir M.; Latash, Mark L.

    2015-01-01

    This study used the framework of the referent configuration hypothesis and slow changes in the external conditions during vertical oscillation of a hand-held object to infer the characteristics of hypothetical control variables. The study had two main objectives: (1) to show that hypothetical control variables, namely, referent coordinates and apparent stiffness of vertical hand position and grip force can be measured in an experiment; and (2) to establish relation(s) between these control variables that yield the classic grip-force-load-force coupling. Healthy subjects gripped a handle and performed vertical oscillations between visual targets at one of five metronome-prescribed frequencies. A Hapticmaster robot was used to induce slow changes in the vertical force applied to the handle, while the size of the handle was changed slowly leading to changes in the grip aperture. The subjects were instructed not to react to possible changes in the external forces. A linear, second-order model was used to reconstruct the referent coordinate and apparent stiffness values for each phase of the vertical oscillation cycle using across-cycle regressions. The reconstructed time profiles of the referent coordinates and apparent stiffness showed consistent trends across subjects and movement frequencies. To validate the method, these values were used to predict the vertical force and the grip force applied to the handle for movement cycles that were not utilized in the reconstruction process. Analysis of the coupling between the four variables, two referent coordinates and two apparent stiffness values, revealed a single strong constraint reflecting the coupling between the grip force and vertical force. We view these data as providing experimental support for the idea of controlling natural, multi-muscle actions with shifts in a low-dimensional set of referent coordinates. PMID:25896800

  5. Radioisotope guided surgery with imaging probe, a hand-held high-resolution gamma camera

    NASA Astrophysics Data System (ADS)

    Soluri, A.; Trotta, C.; Scopinaro, F.; Tofani, A.; D'Alessandria, C.; Pasta, V.; Stella, S.; Massari, R.

    2007-12-01

    Since 1997, our group of Physics together with Nuclear Physicians studies imaging probes (IP), hand-held, high-resolution gamma cameras for radio-guided surgery (RGS). Present work is aimed to verify the usefulness of two updated IP in different surgical operations. Forty patients scheduled for breast cancer sentinel node (SN) biopsy, five patients with nodal recurrence of thyroid cancer, seven patients with parathyroid adenomas, five patients with neuroendocrine tumours (NET), were operated under the guide of IP. We used two different IP with field of view of 1 and 4 in. 2, respectively and intrinsic spatial resolution of about 2 mm. Radioisotopes were 99mTc, 123I and 111In. The 1 in. 2 IP detected SN in all the 40 patients and more than one node in 24, whereas anger camera (AC) failed locating SN in four patients and detected true positive second nodes in only nine patients. The 4 in. 2 IP was used for RGS of thyroid, parathyroid and NETs. It detected eight latero-cervical nodes. In the same patients, AC detected five invaded nodes. Parathyroid adenomas detected by IP were 10 in 7 patients, NET five in five patients. One and 4 in. 2 IPs showed usefulness in all operations. Initial studies on SN biopsy were carried out on small series of patients to validate IP and to demonstrate the effectiveness and usefulness of IP alone or against conventional probes. We propose the use of the IP as control method for legal documentation and surgeon strategy guide before and after lesion(s) removal.

  6. Moving a hand-held object: Reconstruction of referent coordinate and apparent stiffness trajectories.

    PubMed

    Ambike, S; Zhou, T; Zatsiorsky, V M; Latash, M L

    2015-07-01

    This study used the framework of the referent configuration hypothesis and slow changes in the external conditions during vertical oscillation of a hand-held object to infer the characteristics of hypothetical control variables. The study had two main objectives: (1) to show that hypothetical control variables, namely, referent coordinates and apparent stiffness of vertical hand position and grip force can be measured in an experiment; and (2) to establish relation(s) between these control variables that yield the classic grip-force-load-force coupling. Healthy subjects gripped a handle and performed vertical oscillations between visual targets at one of five metronome-prescribed frequencies. A HapticMaster robot was used to induce slow changes in the vertical force applied to the handle, while the size of the handle was changed slowly leading to changes in the grip aperture. The subjects were instructed not to react to possible changes in the external forces. A linear, second-order model was used to reconstruct the referent coordinate and apparent stiffness values for each phase of the vertical oscillation cycle using across-cycle regressions. The reconstructed time profiles of the referent coordinates and apparent stiffness showed consistent trends across subjects and movement frequencies. To validate the method, these values were used to predict the vertical force and the grip force applied to the handle for movement cycles that were not utilized in the reconstruction process. Analysis of the coupling between the four variables, two referent coordinates and two apparent stiffness values, revealed a single strong constraint reflecting the coupling between the grip force and vertical force. We view these data as providing experimental support for the idea of controlling natural, multi-muscle actions with shifts in a low-dimensional set of referent coordinates.

  7. Moving a hand-held object: Reconstruction of referent coordinate and apparent stiffness trajectories.

    PubMed

    Ambike, S; Zhou, T; Zatsiorsky, V M; Latash, M L

    2015-07-01

    This study used the framework of the referent configuration hypothesis and slow changes in the external conditions during vertical oscillation of a hand-held object to infer the characteristics of hypothetical control variables. The study had two main objectives: (1) to show that hypothetical control variables, namely, referent coordinates and apparent stiffness of vertical hand position and grip force can be measured in an experiment; and (2) to establish relation(s) between these control variables that yield the classic grip-force-load-force coupling. Healthy subjects gripped a handle and performed vertical oscillations between visual targets at one of five metronome-prescribed frequencies. A HapticMaster robot was used to induce slow changes in the vertical force applied to the handle, while the size of the handle was changed slowly leading to changes in the grip aperture. The subjects were instructed not to react to possible changes in the external forces. A linear, second-order model was used to reconstruct the referent coordinate and apparent stiffness values for each phase of the vertical oscillation cycle using across-cycle regressions. The reconstructed time profiles of the referent coordinates and apparent stiffness showed consistent trends across subjects and movement frequencies. To validate the method, these values were used to predict the vertical force and the grip force applied to the handle for movement cycles that were not utilized in the reconstruction process. Analysis of the coupling between the four variables, two referent coordinates and two apparent stiffness values, revealed a single strong constraint reflecting the coupling between the grip force and vertical force. We view these data as providing experimental support for the idea of controlling natural, multi-muscle actions with shifts in a low-dimensional set of referent coordinates. PMID:25896800

  8. Application of hand-held mobility spectrometers as sensors in manufacturing industries

    PubMed Central

    Allinson, Graeme

    1998-01-01

    Ion mobility spectrometers (IMS) are small, lightweight, extremely robust devices with low power requirements, no moving parts, no absolute requirement for gases or vacuums, that can be operated at ambient temperatures and pressures, and yet are capable of measuring vapour phase concentrations of organic chemicals at very low levels (sub-μg/l). IMS are capable of analysing complex mixtures and producing a simple spectral output. Volatile components produce measurable negative and positive product ions in the spectrometer through chemical ionization. The spectra produced are essentially the vapour phase fingerprints of the target molecules/mixture. Quantitative data can be obtained provided instrument response is within the linear dynamic range of these instruments, but most practical applications of IMS have used the technology in a qualitative manner in situations which require just an above/below threshold or positive/ negative response. In the manufacturing industry there are many examples where the aroma/odour of raw materials has safety or product quality implications. IMS was not developed to replace traditional methods of analysis, e.g. GC/MS or sensory panels, but rather to provide a rapid, qualitative response complementary to more established methods. This paper reports on the use of a hand-held ion mobility spectrometer to characterize the vapours produced by volatile organic compounds,fresh herbs and retail spice mixtures at ambient temperature and pressure. The results show that by monitoring in both ion acquisition modes, ion mobility spectrometers are capable of discriminating between a wide range of products. PMID:18924815

  9. 78 FR 20695 - Walk-Through Metal Detectors and Hand-Held Metal Detectors Test Method Validation

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-05

    ... has recently developed updated versions of its minimum performance standards for walk-through metal detectors and hand-held metal detectors. In order to ensure that the test methods in the standards are... efforts from testing laboratories. NIJ is also seeking the participation of metal detector...

  10. Hand-held monitor of sympathetic nervous system using salivary amylase activity and its validation by driver fatigue assessment.

    PubMed

    Yamaguchi, Masaki; Deguchi, Mitsuo; Wakasugi, Junichi; Ono, Shin; Takai, Noriyasu; Higashi, Tomoyuki; Mizuno, Yasufumi

    2006-01-15

    In order to realize a hand-held monitor of the sympathetic nervous system, we fabricated a completely automated analytical system for salivary amylase activity using a dry-chemistry system. This was made possible by the fabrication of a disposable test-strip equipped with built-in collecting and reagent papers and an automatic saliva transfer device. In order to cancel out the effects of variations in environmental temperature and pH of saliva, temperature- and pH-adjusted equations were experimentally determined, and each theoretical value was input into the memory of the hand-held monitor. Within a range of salivary amylase activity between 10 and 140 kU/l, the calibration curve for the hand-held monitor showed a coefficient with R(2)=0.97. Accordingly, it was demonstrated that the hand-held monitor enabled a user to automatically measure the salivary amylase activity with high accuracy with only 30 microl sample of saliva within a minute from collection to completion of the measurement. In order to make individual variations of salivary amylase activity negligible during driver fatigue assessment, a normalized equation was proposed. The normalized salivary amylase activity correlated with the mental and physical fatigue states. Thus, this study demonstrated that an excellent hand-held monitor with an algorithm for normalization of individuals' differences in salivary amylase activity, which could be easily and quickly used for evaluating the activity of the sympathetic nervous system at any time. Furthermore, it is suggested that the salivary amylase activity might be used as a better index for psychological research.

  11. Continuing Measurements of CO2 Crystals with a Hand-Held 35 GHz Radiometer

    NASA Technical Reports Server (NTRS)

    Foster, J.; Chang, A.; Hall, D.; Tait, A.; Wergin, W.; Erbe, E.

    2000-01-01

    In order to increase our knowledge of the Martian polar caps, an improved understanding of the behavior of both frozen H2O and CO2 in different parts of the electromagnetic spectrum is needed. The thermal microwave part of the spectrum has received relatively little attention compared to the visible and infrared wavelengths. A simple experiment to measure the brightness temperature of frozen CO2 was first performed in the winter of 1998 using a 35 GHz radiometer. in experiments performed during the winter of 1999 and 2000, passive microwave radiation emanating from within layers of manufactured CO2 (dry ice) crystals was again measured with a 35 GHz handheld radiometer. Both large (0.8 cm) and small (0.3 cm) cylindrical-shaped dry ice pellets, at a temperature of 197 K (-76 C), were measured. A 1 sq m plate of aluminum sheet metal was positioned beneath the dry ice so that microwave emissions from the underlying soil layers would be minimized. Non-absorbing foam was positioned around the sides of the plate in order to keep the dry ice in place and to assure that the incremental deposits were level. Thirty-five GHz measurements of this plate were made through the dry ice deposits in the following way. Layers of dry ice were built up and measurements were repeated for the increasing CO2 pack. First, 7 cm of large CO2 pellets were poured onto the sheet metal plate, then an additional 7 cm were added, and finally, 12 cm were added on top of the 14 cm base. Hand-held 35 GHz measurements were made each time the thickness of the deposit was increased. The same process was repeated for the smaller grain pellets. Furthermore, during the past winter, 35 GHz measurements were taken of a 25 kg (27 cm x 27 cm x 27 cm) solid cube Of CO2, which was cut in half and then re-measured. Additional information is contained in the original extended abstract.

  12. Continuing Measurements of CO2 Crystals with a Hand-Held 35 GHz Radiometer

    NASA Astrophysics Data System (ADS)

    Foster, J.; Chang, A.; Hall, D.; Tait, A.; Wergin, W.; Erbe, E.

    2000-08-01

    In order to increase our knowledge of the Martian polar caps, an improved understanding of the behavior of both frozen H2O and CO2 in different parts of the electromagnetic spectrum is needed. The thermal microwave part of the spectrum has received relatively little attention compared to the visible and infrared wavelengths. A simple experiment to measure the brightness temperature of frozen CO2 was first performed in the winter of 1998 using a 35 GHz radiometer. in experiments performed during the winter of 1999 and 2000, passive microwave radiation emanating from within layers of manufactured CO2 (dry ice) crystals was again measured with a 35 GHz handheld radiometer. Both large (0.8 cm) and small (0.3 cm) cylindrical-shaped dry ice pellets, at a temperature of 197 K (-76 C), were measured. A 1 sq m plate of aluminum sheet metal was positioned beneath the dry ice so that microwave emissions from the underlying soil layers would be minimized. Non-absorbing foam was positioned around the sides of the plate in order to keep the dry ice in place and to assure that the incremental deposits were level. Thirty-five GHz measurements of this plate were made through the dry ice deposits in the following way. Layers of dry ice were built up and measurements were repeated for the increasing CO2 pack. First, 7 cm of large CO2 pellets were poured onto the sheet metal plate, then an additional 7 cm were added, and finally, 12 cm were added on top of the 14 cm base. Hand-held 35 GHz measurements were made each time the thickness of the deposit was increased. The same process was repeated for the smaller grain pellets. Furthermore, during the past winter, 35 GHz measurements were taken of a 25 kg (27 cm x 27 cm x 27 cm) solid cube Of CO2, which was cut in half and then re-measured. Additional information is contained in the original extended abstract.

  13. Library service delivery via hand-held computers--the right information at the point of care.

    PubMed

    Peterson, Mary

    2004-03-01

    Today's health and medical librarians are well aware of the move towards evidence-based clinical practice which has emerged during the past decade. Hand-in-hand with this trend is the need for health practitioners to have access to the best possible evidence to help them in their clinical decision making. Libraries have a key role in the provision of information to their clients, and this means keeping abreast, not only of the various information sources available, but also the means by which those sources may be used. This paper will examine the effects that the hand-held computer is having on the work practices of our clients-library users. It is hoped that the paper will give an insight into the various types of library material which are suitable for use with hand-held devices, and an understanding of their advantages and limitations.

  14. Analysis of the reliability of the make test in young adults by using a hand-held dynamometer.

    PubMed

    Kim, Seong-Gil; Lim, Dong-Ho; Cho, Yong Ho

    2016-08-01

    [Purpose] The purpose of this study was to analyze intra-rater and inter-rater reliabilities of the make test, a manual muscle testing measurement method, using a hand-held dynamometer in Korean young adults. [Subjects and Methods] A total of 42 university students participated in this study. The make test, a manual muscle testing method, was conducted. A hand-held dynamometer was used to measure elbow joint flexion during the make test. [Results] Both intra-rater (the intraclass correlation coefficient=0.992) and inter-rater reliabilities (the intraclass correlation coefficient=0.949) were excellent, with values over 0.9. [Conclusion] The make test is a useful manual muscle testing method with high intra-rater and inter-rater reliability. PMID:27630404

  15. Analysis of the reliability of the make test in young adults by using a hand-held dynamometer

    PubMed Central

    Kim, Seong-Gil; Lim, Dong-Ho; Cho, Yong Ho

    2016-01-01

    [Purpose] The purpose of this study was to analyze intra-rater and inter-rater reliabilities of the make test, a manual muscle testing measurement method, using a hand-held dynamometer in Korean young adults. [Subjects and Methods] A total of 42 university students participated in this study. The make test, a manual muscle testing method, was conducted. A hand-held dynamometer was used to measure elbow joint flexion during the make test. [Results] Both intra-rater (the intraclass correlation coefficient=0.992) and inter-rater reliabilities (the intraclass correlation coefficient=0.949) were excellent, with values over 0.9. [Conclusion] The make test is a useful manual muscle testing method with high intra-rater and inter-rater reliability.

  16. Analysis of the reliability of the make test in young adults by using a hand-held dynamometer

    PubMed Central

    Kim, Seong-Gil; Lim, Dong-Ho; Cho, Yong Ho

    2016-01-01

    [Purpose] The purpose of this study was to analyze intra-rater and inter-rater reliabilities of the make test, a manual muscle testing measurement method, using a hand-held dynamometer in Korean young adults. [Subjects and Methods] A total of 42 university students participated in this study. The make test, a manual muscle testing method, was conducted. A hand-held dynamometer was used to measure elbow joint flexion during the make test. [Results] Both intra-rater (the intraclass correlation coefficient=0.992) and inter-rater reliabilities (the intraclass correlation coefficient=0.949) were excellent, with values over 0.9. [Conclusion] The make test is a useful manual muscle testing method with high intra-rater and inter-rater reliability. PMID:27630404

  17. Comparing dynamic contour tonometry to Goldmann and hand-held tonometry in normal, ocular hypertension, and glaucoma populations.

    PubMed

    Eichenbaum, Kenneth D; Mezej, Mihaly; Eichenbaum, Joseph W

    2007-01-01

    We prospectively compared dynamic contour tonometry (DCT) to Goldmann (GAT) and hand-held tonometry (HHT) in normal, ocular hypertension, and glaucoma populations. Both measurements were made on each patient within a 5-minute period during routine office exams over 4 months. While DCT is in good overall agreement with GAT and HTT, there is some systematic deviation at different pressure ranges in normal, ocular hypertension, and glaucoma populations.

  18. Simultaneous hand-held contact color fundus and SD-OCT imaging for pediatric retinal diseases (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Ruggeri, Marco; Hernandez, Victor; De Freitas, Carolina; Relhan, Nidhi; Silgado, Juan; Manns, Fabrice; Parel, Jean-Marie

    2016-03-01

    Hand-held wide-field contact color fundus photography is currently the standard method to acquire diagnostic images of children during examination under anesthesia and in the neonatal intensive care unit. The recent development of portable non-contact hand-held OCT retinal imaging systems has proved that OCT is of tremendous help to complement fundus photography in the management of pediatric patients. Currently, there is no commercial or research system that combines color wide-field digital fundus and OCT imaging in a contact-fashion. The contact of the probe with the cornea has the advantages of reducing motion experienced by the photographer during the imaging and providing fundus and OCT images with wider field of view that includes the periphery of the retina. In this study we produce proof of concept for a contact-type hand-held unit for simultaneous color fundus and OCT live view of the retina of pediatric patients. The front piece of the hand-held unit consists of a contact ophthalmoscopy lens integrating a circular light guide that was recovered from a digital fundus camera for pediatric imaging. The custom-made rear piece consists of the optics to: 1) fold the visible aerial image of the fundus generated by the ophthalmoscopy lens on a miniaturized level board digital color camera; 2) conjugate the eye pupil to the galvanometric scanning mirrors of an OCT delivery system. Wide-field color fundus and OCT images were simultaneously obtained in an eye model and sequentially obtained on the eye of a conscious 25 year-old human subject with healthy retina.

  19. Robotic hand-held surgical device: evaluation of end-effector's kinematics and development of proof-of-concept prototypes.

    PubMed

    Zahraee, Ali Hassan; Szewczyk, Jérome; Paik, Jamie Kyujin; Morel, Guillaume

    2010-01-01

    We are working towards the development of a robotic hand-held surgical device for laparoscopic interventions that enhances the surgeons' dexterity. In this paper, the kinematics of the end effector is studied. Different choices of kinematics are compared during an evaluation campaign using a virtual reality simulator to find the optimal one: the Yaw-Roll (YR) kinematics. A proof of concept prototype is made based on the results. PMID:20879429

  20. The Hewlett-Packard HP-41CV Hand-Held Computer as a Medium for Teaching Mathematics to Fire Control Systems Repairers. Research Report 1408.

    ERIC Educational Resources Information Center

    Boldovici, John A.; Scott, Thomas D.

    A study compared the benefits of using the Hewlett-Packard HP-41CV hand-held computer, as opposed to conventional training without computers, in teaching mathematics to fire control systems repairers. Thirty soldiers in a course to train fire control systems repairers received training in technical mathematics using the hand-held computer, whereas…

  1. Rapid prediction of total petroleum hydrocarbons in soil using a hand-held mid-infrared field instrument.

    PubMed

    Webster, Grant T; Soriano-Disla, José M; Kirk, Joel; Janik, Leslie J; Forrester, Sean T; McLaughlin, Mike J; Stewart, Richard J

    2016-11-01

    This manuscript reports on the performance of a hand-held diffuse reflectance (mid)-infrared Fourier transform (DRIFT) spectrometer for the prediction of total petroleum hydrocarbons (TPH) in three different diesel-contaminated soils. These soils include: a carbonate dominated clay, a kaolinite dominated clay and a loam from Padova Italy, north Western Australia and southern Nigeria, respectively. Soils were analysed for TPH concentration using a standard laboratory methods and scanned in DRIFT mode with the hand-held spectrometer to determine TPH calibration models. Successful partial least square regression (PLSR) predictions, with coefficient of determination (R(2)) ~0.99 and root mean square error (RMSE) <200mg/kg, were obtained for the low range TPH concentrations of 0 to ~3,000mg/kg. These predictions were carried out using a set of independent samples for each soil type. Prediction models were also tested for the full concentration range (0-60,000mg/kg) for each soil type model with R(2) and RMSE values of ~0.99 and <1,255mg/kg, respectively. Furthermore, a number of intermediate concentration range models were also generated for each soil type with similar R(2) values of ~0.99 and RMSE values <800mg/kg. This study shows the capability of using a portable mid-infrared (MIR) DRIFT spectrometer for predicting TPH in a variety of soil types and the potential for being a rapid in-field screening method for TPH concentration levels at common regulatory thresholds. A novel hand-held mid-infrared instrument can accurately detect TPH across different soil types and concentrations, which paves the way for a variety of applications in the field. PMID:27591631

  2. Rapid prediction of total petroleum hydrocarbons in soil using a hand-held mid-infrared field instrument.

    PubMed

    Webster, Grant T; Soriano-Disla, José M; Kirk, Joel; Janik, Leslie J; Forrester, Sean T; McLaughlin, Mike J; Stewart, Richard J

    2016-11-01

    This manuscript reports on the performance of a hand-held diffuse reflectance (mid)-infrared Fourier transform (DRIFT) spectrometer for the prediction of total petroleum hydrocarbons (TPH) in three different diesel-contaminated soils. These soils include: a carbonate dominated clay, a kaolinite dominated clay and a loam from Padova Italy, north Western Australia and southern Nigeria, respectively. Soils were analysed for TPH concentration using a standard laboratory methods and scanned in DRIFT mode with the hand-held spectrometer to determine TPH calibration models. Successful partial least square regression (PLSR) predictions, with coefficient of determination (R(2)) ~0.99 and root mean square error (RMSE) <200mg/kg, were obtained for the low range TPH concentrations of 0 to ~3,000mg/kg. These predictions were carried out using a set of independent samples for each soil type. Prediction models were also tested for the full concentration range (0-60,000mg/kg) for each soil type model with R(2) and RMSE values of ~0.99 and <1,255mg/kg, respectively. Furthermore, a number of intermediate concentration range models were also generated for each soil type with similar R(2) values of ~0.99 and RMSE values <800mg/kg. This study shows the capability of using a portable mid-infrared (MIR) DRIFT spectrometer for predicting TPH in a variety of soil types and the potential for being a rapid in-field screening method for TPH concentration levels at common regulatory thresholds. A novel hand-held mid-infrared instrument can accurately detect TPH across different soil types and concentrations, which paves the way for a variety of applications in the field.

  3. Catalog of Space Shuttle Earth Observations Hand-Held Photography: Space Transportation System (STS) 41-6 Mission

    NASA Technical Reports Server (NTRS)

    Nowakowski, Barbara S.; Palmer, Wesley F.

    1985-01-01

    This document catalogs Space Shuttle hand-held Earth observations photography which was collected on the Space Transportation System (STS) 41-G mission of October 1984. The catalog includes the following data for each of 2480 frames: geographical name, feature description, latitude and longitude, percentage of cloud cover, look direction and tilt, lens focal length, exposure evaluation, stereopairs, and orbit number. The catalog is a product of the Space Shuttle Earth Observations Project, Solar System Exploration Division, Space and Life Sciences Directorate, of the National Aeronautics and Space Administration, Lyndon B. Johnson Space Center.

  4. Analysis of Accuracy in Pointing with Redundant Hand-held Tools: A Geometric Approach to the Uncontrolled Manifold Method

    PubMed Central

    Campolo, Domenico; Widjaja, Ferdinan; Xu, Hong; Ang, Wei Tech; Burdet, Etienne

    2013-01-01

    This work introduces a coordinate-independent method to analyse movement variability of tasks performed with hand-held tools, such as a pen or a surgical scalpel. We extend the classical uncontrolled manifold (UCM) approach by exploiting the geometry of rigid body motions, used to describe tool configurations. In particular, we analyse variability during a static pointing task with a hand-held tool, where subjects are asked to keep the tool tip in steady contact with another object. In this case the tool is redundant with respect to the task, as subjects control position/orientation of the tool, i.e. 6 degrees-of-freedom (dof), to maintain the tool tip position (3dof) steady. To test the new method, subjects performed a pointing task with and without arm support. The additional dof introduced in the unsupported condition, injecting more variability into the system, represented a resource to minimise variability in the task space via coordinated motion. The results show that all of the seven subjects channeled more variability along directions not directly affecting the task (UCM), consistent with previous literature but now shown in a coordinate-independent way. Variability in the unsupported condition was only slightly larger at the endpoint but much larger in the UCM. PMID:23592956

  5. Analysis of accuracy in pointing with redundant hand-held tools: a geometric approach to the uncontrolled manifold method.

    PubMed

    Campolo, Domenico; Widjaja, Ferdinan; Xu, Hong; Ang, Wei Tech; Burdet, Etienne

    2013-04-01

    This work introduces a coordinate-independent method to analyse movement variability of tasks performed with hand-held tools, such as a pen or a surgical scalpel. We extend the classical uncontrolled manifold (UCM) approach by exploiting the geometry of rigid body motions, used to describe tool configurations. In particular, we analyse variability during a static pointing task with a hand-held tool, where subjects are asked to keep the tool tip in steady contact with another object. In this case the tool is redundant with respect to the task, as subjects control position/orientation of the tool, i.e. 6 degrees-of-freedom (dof), to maintain the tool tip position (3dof) steady. To test the new method, subjects performed a pointing task with and without arm support. The additional dof introduced in the unsupported condition, injecting more variability into the system, represented a resource to minimise variability in the task space via coordinated motion. The results show that all of the seven subjects channeled more variability along directions not directly affecting the task (UCM), consistent with previous literature but now shown in a coordinate-independent way. Variability in the unsupported condition was only slightly larger at the endpoint but much larger in the UCM.

  6. DNA extraction-free quantification of Dehalococcoides spp. in groundwater using a hand-held device.

    PubMed

    Stedtfeld, Robert D; Stedtfeld, Tiffany M; Kronlein, Maggie; Seyrig, Gregoire; Steffan, Robert J; Cupples, Alison M; Hashsham, Syed A

    2014-12-01

    Nucleic acid amplification of biomarkers is increasingly used to measure microbial activity and predict remedial performance in sites with trichloroethene (TCE) contamination. Field-based genetic quantification of microorganisms associated with bioremediation may help increase accuracy that is diminished through transport and processing of groundwater samples. Sterivex cartridges and a previously undescribed mechanism for eluting biomass was used to concentrate cells. DNA extraction-free loop mediated isothermal amplification (LAMP) was monitored in real-time with a point of use device (termed Gene-Z). A detection limit of 10(5) cells L(–1) was obtained, corresponding to sensitivity between 10 to 100 genomic copies per reaction for assays targeting the Dehalococcoides spp. specific 16S rRNA gene and vcrA gene, respectively. The quantity of Dehalococcoides spp. genomic copies measured from two TCE contaminated groundwater samples with conventional means of quantification including filtration, DNA extraction, purification, and qPCR was comparable to the field ready technique. Overall, this method of measuring Dehalococcoides spp. and vcrA genes in groundwater via direct amplification without intentional DNA extraction and purification is demonstrated, which may provide a more accurate mechanism of predicting remediation rates.

  7. SHIELDING AND DETECTOR RESPONSE CALCULATIONS PERTAINING TO CATEGORY 1 QUANTITIES OF PLUTONIUM AND HAND-HELD PLASTIC SCINTILLATORS

    SciTech Connect

    Couture, A.

    2013-06-07

    Nuclear facilities sometimes use hand-held plastic scintillator detectors to detect attempts to divert special nuclear material in situations where portal monitors are impractical. MCNP calculations have been performed to determine the neutron and gamma radiation field arising from a Category I quantity of weapons-grade plutonium in various shielding configurations. The shields considered were composed of combinations of lead and high-density polyethylene such that the mass of the plutonium plus shield was 22.7 kilograms. Monte-Carlo techniques were also used to determine the detector response to each of the shielding configurations. The detector response calculations were verified using field measurements of high-, medium-, and low- energy gamma-ray sources as well as a Cf-252 neutron source.

  8. 3D Scan of Ornamental Column (huabiao) Using Terrestrial LiDAR and Hand-held Imager

    NASA Astrophysics Data System (ADS)

    Zhang, W.; Wang, C.; Xi, X.

    2015-08-01

    In ancient China, Huabiao was a type of ornamental column used to decorate important buildings. We carried out 3D scan of a Huabiao located in Peking University, China. This Huabiao was built no later than 1742. It is carved by white marble, 8 meters in height. Clouds and various postures of dragons are carved on its body. Two instruments were used to acquire the point cloud of this Huabiao, a terrestrial LiDAR (Riegl VZ-1000) and a hand-held imager (Mantis Vision F5). In this paper, the details of the experiment were described, including the differences between these two instruments, such as working principle, spatial resolution, accuracy, instrument dimension and working flow. The point clouds obtained respectively by these two instruments were compared, and the registered point cloud of Huabiao was also presented. These should be of interest and helpful for the research communities of archaeology and heritage.

  9. HAND-HELD GAMMA-RAY SPECTROMETER BASED ON HIGH-EFFICIENCY FRISCH-RING CdZnTe DETECTORS.

    SciTech Connect

    CUI,Y.

    2007-05-01

    Frisch-ring CdZnTe detectors have demonstrated good energy resolution, el% FWHM at 662 keV, and good efficiency for detecting gamma rays. This technique facilitates the application of CdZnTe materials for high efficiency gamma-ray detection. A hand-held gamma-ray spectrometer based on Frisch-ring detectors is being designed at Brookhaven National Laboratory. It employs an 8x8 CdZnTe detector array to achieve a high volume of 19.2 cm3, so that detection efficiency is significantly improved. By using the front-end ASICs developed at BNL, this spectrometer has a small profile and high energy resolution. The spectrometer includes signal processing circuit, digitization and storage circuit, high-voltage module, and USB interface. In this paper, we introduce the details of the system structure and report our test results with it.

  10. Demise of the checksheet: Using off-the-shelf miniature hand-held computers for remote fieldwork applications.

    PubMed

    Whiten, A; Barton, R A

    1988-06-01

    Laboratory-based researchers have increasingly reaped the benefits of entering data directly into a computer; those concerned with behaviour often using specially designed keyboards. However, many ecologists and ethologists doing fieldwork in remote places have been reluctant to abandon paper checksheets because of worries about unreliability, lack of electrical supply and sheer weight of computer equipment, adding to more general drawbacks such as the need for considerable expertise in purpose-built hardware and software. Having used commercially available hand-held computers extensively for our own fieldwork on baboons in Africa, we are confident that these worries are unfounded. As some researchers have already discovered, field computerization is not something to be distrusted, but in fact offers several important benefits. PMID:21227187

  11. Hand-Held Gamma-Ray Spectrometer Based on High-Efficiency Frisch-Ring Cdznte Detectors

    SciTech Connect

    Cui, Y.; Bolotnikov, A; Camarda, G; Hossain, A; James, R; DeGeronimo, G; Fried, J; O'Connor, P; Kargar, A; et. al.

    2008-01-01

    Frisch-ring CdZnTe detectors have demonstrated both good energy resolution, <1% FWHM at 662 keV, and good efficiency in detecting gamma rays, highlighting the strong potential of CdZnTe materials for such applications. We are designing a hand-held gamma-ray spectrometer based on Frisch-ring detectors at Brookhaven National Laboratory. It employs an 8 times 8 CdZnTe detector array to achieve a high volume of 19.2 cm3, so greatly improving detection efficiency. By using the front-end application-specific integrated circuits (ASICs) developed at BNL, this spectrometer has a small profile and high energy-resolution. It includes a signal processing circuit, digitization and storage circuits, a high-voltage module, and a universal serial bus (USB) interface. In this paper, we detail the system's structure and report the results of our tests with it.

  12. Rapid and accurate determination of total lung capacity (TLC) from routine chest radiograms using a programmable hand-held calculator.

    PubMed

    Rodgers, R P; Tannen, R

    1983-01-01

    Since its appearance in 1960, the method of Barnhard and associates for the determination of total lung capacity (TLC) from routine chest radiograms has been widely studied in normal and diseased subjects. The method appears to be as accurate as the current definitive procedure, total body plethysmography. The method is in routine use in major medical institutions where the procedure has been automated, but the method does not seem to have gained the wide use it deserves. This is likely due to the tedium of the technique when performed manually--a single determination can require 30 min. We present here an implementation of the Barnhard method for the HP41-C hand-held programmable calculator. In conjunction with the use of a transparent reticle used for obtaining the required measurements, the program allows a single measurement to be made in under 12 minutes. We hope this technique will make radiographic TLC measurements more broadly accessible to the medical profession. PMID:6872526

  13. US-ROK Action Sheet 34: Safeguards Application of a Hand-held Mechanically Cooled Germanium Spectrometer

    SciTech Connect

    Dreyer, J.; Burks, M.; Ham, Y.; Kwak, S.

    2015-10-20

    This report summarizes results of Action Sheet 34 - for the cooperative efforts on the field testing and evaluation of a high-resolution, hand-held, gamma-ray spectrometer, known as SPG (Spectroscopic Planar Germanium), for safeguards application such as short notice inspections, UF6 analysis, enrichment determination, and other potential applications. The Spectroscopic Planar Germanium (SPG) has been demonstrated IAEA Physical Inventory Verification (PIV) in South Korea. This field test was a success and the feedback provided by KINAC, IAEA, and national laboratory staff was used to direct efforts to improve the instrument this year. Key points in this report include measurement results from PIV, analysis of spectra with commercially available Ortec U235 and PC-FRAM, and completion of tripod and tungsten collimator and integration of user feedback.

  14. Hand-held multi-DOF robotic forceps for neurosurgery designed for dexterous manipulation in deep and narrow space.

    PubMed

    Okubo, Takuro; Harada, Kanako; Fujii, Masahiro; Tanaka, Shinichi; Ishimaru, Tetsuya; Iwanaka, Tadashi; Nakatomi, Hirohumi; Sora, Sigeo; Morita, Akio; Sugita, Naohiko; Mitsuishi, Mamoru

    2014-01-01

    Neurosurgical procedures require precise and dexterous manipulation of a surgical suture in narrow and deep spaces in the brain. This is necessary for surgical tasks such as the anastomosis of microscopic blood vessels and dura mater suturing. A hand-held multi-degree of freedom (DOF) robotic forceps was developed to aid the performance of such difficult tasks. The diameter of the developed robotic forceps is 3.5 mm, and its tip has three DOFs, namely, bending, rotation, and grip. Experimental results showed that the robotic forceps had an average needle insertion force of 1.7 N. Therefore, an increase in the needle insertion force is necessary for practical application of the developed device.

  15. The GSFC Mark-2 three band hand-held radiometer. [thematic mapper for ground truth data collection

    NASA Technical Reports Server (NTRS)

    Tucker, C. J.; Jones, W. H.; Kley, W. A.; Sundstrom, G. J.

    1980-01-01

    A self-contained, portable, hand-radiometer designed for field usage was constructed and tested. The device, consisting of a hand-held probe containing three sensors and a strap supported electronic module, weighs 4 1/2 kilograms. It is powered by flashlight and transistor radio batteries, utilizes two silicon and one lead sulfide detectors, has three liquid crystal displays, sample and hold radiometric sampling, and its spectral configuration corresponds to LANDSAT-D's thematic mapper bands. The device was designed to support thematic mapper ground-truth data collection efforts and to facilitate 'in situ' ground-based remote sensing studies of natural materials. Prototype instruments were extensively tested under laboratory and field conditions with excellent results.

  16. A new miniature hand-held solar-blind reagentless standoff chemical, biological, and explosives (CBE) sensor

    NASA Astrophysics Data System (ADS)

    Hug, W. F.; Reid, R. D.; Bhartia, R.; Lane, A. L.

    2008-04-01

    Improvised explosive devices (IEDs), vehicle-borne improvised explosive devices (VBIEDs), and suicide bombers are a major threat to many countries and their citizenry. The ability to detect trace levels of these threats with a miniature, hand-held, reagentless, standoff sensor represents a major improvement in the state of the art of CBE surface sensors. Photon Systems, Inc., in collaboration with Jet Propulsion Laboratory, recently demonstrated a new technology hand-held sensor for reagentless, close-range, standoff detection and identification of trace levels CBE materials on surfaces. This targeted ultraviolet CBE (TUCBE) sensor is the result of an Army Phase I STTR program. The resulting 5lb, 5W, flashlight-sized sensor can discriminate CBE from background materials using a combination of deep UV excited resonance Raman (RR) and laser induced native fluorescence (LINF) emissions resulting from excitation by a new technology deep UV laser. Detection and identification is accomplished in less than 1ms. Standoff excitation of suspicious packages, vehicles, persons, and other objects that may contain hazardous materials is accomplished using wavelengths below 250nm where Raman and native fluorescence emissions occupy distinctly different wavelength regions. This enables simultaneous detection of RR and LINF emissions with no interferences. The sensor employs fused RR/LINF chemometric methods to extract the identity of targeted materials from background clutter. Photon Systems has demonstrated detection and identification of 100ng/cm2 of explosives materials at a distance of 1 meter using a sensor with 3.8 cm optical aperture. Expansion of the optical aperture to 38 cm in a lantern-sized sensor will enable similar detection and identification of CBE materials at standoff distances of 10 meters. As a result of excitation and detection in the deep UV and the use of a gated detection system, the sensor is solar blind and can operate in full daylight conditions.

  17. Cellphone-Based Hand-Held Microplate Reader for Point-of-Care Testing of Enzyme-Linked Immunosorbent Assays.

    PubMed

    Berg, Brandon; Cortazar, Bingen; Tseng, Derek; Ozkan, Haydar; Feng, Steve; Wei, Qingshan; Chan, Raymond Yan-Lok; Burbano, Jordi; Farooqui, Qamar; Lewinski, Michael; Di Carlo, Dino; Garner, Omai B; Ozcan, Aydogan

    2015-08-25

    Standard microplate based enzyme-linked immunosorbent assays (ELISA) are widely utilized for various nanomedicine, molecular sensing, and disease screening applications, and this multiwell plate batched analysis dramatically reduces diagnosis costs per patient compared to nonbatched or nonstandard tests. However, their use in resource-limited and field-settings is inhibited by the necessity for relatively large and expensive readout instruments. To mitigate this problem, we created a hand-held and cost-effective cellphone-based colorimetric microplate reader, which uses a 3D-printed opto-mechanical attachment to hold and illuminate a 96-well plate using a light-emitting-diode (LED) array. This LED light is transmitted through each well, and is then collected via 96 individual optical fibers. Captured images of this fiber-bundle are transmitted to our servers through a custom-designed app for processing using a machine learning algorithm, yielding diagnostic results, which are delivered to the user within ∼1 min per 96-well plate, and are visualized using the same app. We successfully tested this mobile platform in a clinical microbiology laboratory using FDA-approved mumps IgG, measles IgG, and herpes simplex virus IgG (HSV-1 and HSV-2) ELISA tests using a total of 567 and 571 patient samples for training and blind testing, respectively, and achieved an accuracy of 99.6%, 98.6%, 99.4%, and 99.4% for mumps, measles, HSV-1, and HSV-2 tests, respectively. This cost-effective and hand-held platform could assist health-care professionals to perform high-throughput disease screening or tracking of vaccination campaigns at the point-of-care, even in resource-poor and field-settings. Also, its intrinsic wireless connectivity can serve epidemiological studies, generating spatiotemporal maps of disease prevalence and immunity. PMID:26159546

  18. Automatic detection of a hand-held needle in ultrasound via phased-based analysis of the tremor motion

    NASA Astrophysics Data System (ADS)

    Beigi, Parmida; Salcudean, Septimiu E.; Rohling, Robert; Ng, Gary C.

    2016-03-01

    This paper presents an automatic localization method for a standard hand-held needle in ultrasound based on temporal motion analysis of spatially decomposed data. Subtle displacement arising from tremor motion has a periodic pattern which is usually imperceptible in the intensity image but may convey information in the phase image. Our method aims to detect such periodic motion of a hand-held needle and distinguish it from intrinsic tissue motion, using a technique inspired by video magnification. Complex steerable pyramids allow specific design of the wavelets' orientations according to the insertion angle as well as the measurement of the local phase. We therefore use steerable pairs of even and odd Gabor wavelets to decompose the ultrasound B-mode sequence into various spatial frequency bands. Variations of the local phase measurements in the spatially decomposed input data is then temporally analyzed using a finite impulse response bandpass filter to detect regions with a tremor motion pattern. Results obtained from different pyramid levels are then combined and thresholded to generate the binary mask input for the Hough transform, which determines an estimate of the direction angle and discards some of the outliers. Polynomial fitting is used at the final stage to remove any remaining outliers and improve the trajectory detection. The detected needle is finally added back to the input sequence as an overlay of a cloud of points. We demonstrate the efficiency of our approach to detect the needle using subtle tremor motion in an agar phantom and in-vivo porcine cases where intrinsic motion is also present. The localization accuracy was calculated by comparing to expert manual segmentation, and presented in (mean, standard deviation and root-mean-square error) of (0.93°, 1.26° and 0.87°) and (1.53 mm, 1.02 mm and 1.82 mm) for the trajectory and the tip, respectively.

  19. Hand-held dynamometry in patients with haematological malignancies: Measurement error in the clinical assessment of knee extension strength

    PubMed Central

    Knols, Ruud H; Aufdemkampe, Geert; de Bruin, Eling D; Uebelhart, Daniel; Aaronson, Neil K

    2009-01-01

    Background Hand-held dynamometry is a portable and inexpensive method to quantify muscle strength. To determine if muscle strength has changed, an examiner must know what part of the difference between a patient's pre-treatment and post-treatment measurements is attributable to real change, and what part is due to measurement error. This study aimed to determine the relative and absolute reliability of intra and inter-observer strength measurements with a hand-held dynamometer (HHD). Methods Two observers performed maximum voluntary peak torque measurements (MVPT) for isometric knee extension in 24 patients with haematological malignancies. For each patient, the measurements were carried out on the same day. The main outcome measures were the intraclass correlation coefficient (ICC ± 95%CI), the standard error of measurement (SEM), the smallest detectable difference (SDD), the relative values as % of the grand mean of the SEM and SDD, and the limits of agreement for the intra- and inter-observer '3 repetition average' and the 'highest value of 3 MVPT' knee extension strength measures. Results The intra-observer ICCs were 0.94 for the average of 3 MVPT (95%CI: 0.86–0.97) and 0.86 for the highest value of 3 MVPT (95%CI: 0.71–0.94). The ICCs for the inter-observer measurements were 0.89 for the average of 3 MVPT (95%CI: 0.75–0.95) and 0.77 for the highest value of 3 MVPT (95%CI: 0.54–0.90). The SEMs for the intra-observer measurements were 6.22 Nm (3.98% of the grand mean (GM) and 9.83 Nm (5.88% of GM). For the inter-observer measurements, the SEMs were 9.65 Nm (6.65% of GM) and 11.41 Nm (6.73% of GM). The SDDs for the generated parameters varied from 17.23 Nm (11.04% of GM) to 27.26 Nm (17.09% of GM) for intra-observer measurements, and 26.76 Nm (16.77% of GM) to 31.62 Nm (18.66% of GM) for inter-observer measurements, with similar results for the limits of agreement. Conclusion The results indicate that there is acceptable relative reliability for

  20. Comparison of a digital and an optical analogue hand-held refractometer for the measurement of canine urine specific gravity.

    PubMed

    Paris, J K; Bennett, A D; Dodkin, S J; Gunn-Moore, D A

    2012-05-01

    Urine specific gravity (USG) is used clinically as a measure of urine concentration, and is routinely assessed by refractometry. A comparison between optical analogue and digital refractometers for evaluation of canine urine has not been reported. The aim of this study was to compare a digital and an optical analogue hand-held refractometer for the measurement of canine USG, and to assess correlation with urine osmolality. Prospective study. Free-catch urine samples were collected from 285 hospitalised adult dogs, and paired USG readings were obtained with a digital and an optical analogue refractometer. In 50 dogs, urine osmolality was also measured using a freezing point depression osmometer. There was a small but statistically significant difference between the two refractometers (P<0.001), with the optical analogue refractometer reading higher than the digital refractometer (mean difference 0.0006, sd 0.0012). Paired refractometer measurements varied by <0.002 in 91.5 per cent of cases. The optical analogue and digital refractometer readings showed excellent correlation with osmolality (r=0.980 and r=0.977, respectively, P<0.001 in both cases). Despite statistical significance, the difference between the two refractometers is unlikely to be clinically significant. Both instruments provide an accurate assessment of USG in dogs. PMID:22505243

  1. Four dimensional hybrid ultrasound and optoacoustic imaging via passive element optical excitation in a hand-held probe

    SciTech Connect

    Fehm, Thomas Felix; Razansky, Daniel; Deán-Ben, Xosé Luís

    2014-10-27

    Ultrasonography and optoacoustic imaging share powerful advantages related to the natural aptitude for real-time image rendering with high resolution, the hand-held operation, and lack of ionizing radiation. The two methods also possess very different yet highly complementary advantages of the mechanical and optical contrast in living tissues. Nonetheless, efficient integration of these modalities remains challenging owing to the fundamental differences in the underlying physical contrast, optimal signal acquisition, and image reconstruction approaches. We report on a method for hybrid acquisition and reconstruction of three-dimensional pulse-echo ultrasound and optoacoustic images in real time based on passive ultrasound generation with an optical absorber, thus avoiding the hardware complexity of active ultrasound generation. In this way, complete hybrid datasets are generated with a single laser interrogation pulse, resulting in simultaneous rendering of ultrasound and optoacoustic images at an unprecedented rate of 10 volumetric frames per second. Performance is subsequently showcased in phantom experiments and in-vivo measurements from a healthy human volunteer, confirming general clinical applicability of the method.

  2. Target detection and quantification using a hybrid hand-held diffuse optical tomography and photoacoustic tomography system

    NASA Astrophysics Data System (ADS)

    Kumavor, Patrick D.; Xu, Chen; Aguirre, Andres; Gamelin, John; Ardeshirpour, Yasaman; Tavakoli, Behnoosh; Zanganeh, Saeid; Alqasemi, Umar; Yang, Yi; Zhu, Quing

    2011-04-01

    We present a photoacoustic tomography-guided diffuse optical tomography approach using a hand-held probe for detection and characterization of deeply-seated targets embedded in a turbid medium. Diffuse optical tomography guided by coregistered ultrasound, MRI, and x ray has demonstrated a great clinical potential to overcome lesion location uncertainty and to improve light quantification accuracy. However, due to the different contrast mechanisms, some lesions may not be detectable by a nonoptical modality but yet have high optical contrast. Photoacoustic tomography utilizes a short-pulsed laser beam to diffusively penetrate into tissue. Upon absorption of the light by the target, photoacoustic waves are generated and used to reconstruct, at ultrasound resolution, the optical absorption distribution that reveals optical contrast. However, the robustness of optical property quantification of targets by photoacoustic tomography is complicated because of the wide range of ultrasound transducer sensitivity, the orientation and shape of the targets relative to the ultrasound array, and the uniformity of the laser beam. We show in this paper that the relative optical absorption map provided by photoacoustic tomography can potentially guide the diffuse optical tomography to accurately reconstruct target absorption maps.

  3. ECG boy: low-cost medical instrumentation using mass-produced, hand-held entertainment computers. A preliminary report.

    PubMed

    Rohde, M M; Bement, S L; Lupa, R S

    1998-01-01

    A prototype low-cost, portable ECG monitor, the "ECG Boy," is described. A mass produced hand-held video game platform is the basis for a complete three-lead, driven right-leg electrocardiogram (ECG). The ECG circuitry is planned to fit in a standard modular cartridge that is inserted in a production Nintendo "Gameboy." The combination is slightly smaller than a paperback book and weighs less than 500 g. The unit contains essential safety features such as optical isolation and is powered by 9-V and AA batteries. Functionally, the ECG Boy permits viewing ECG recordings in real time on the integrated screen. The user can select both the lead displayed on the screen and the time scale used. A 1-mV reference allows for calibration. Other ECG enhancements such as data transmission via telephone can be easily and inexpensively added to this system. The ECG Boy is intended as a proof of concept for a new class of low-cost biomedical instruments. Rising health care costs coupled with tightened funding have created an acute demand for low-cost medical equipment that satisfies safety and quality standards. A mass-produced microprocessor-based platform designed for the entertainment market can keep costs low while providing a functional basis for a biomedical instrument.

  4. Effects of a new mild shampoo for preventing hair loss in Asian by a simple hand-held phototrichogram technique.

    PubMed

    Baek, J H; Lee, S Y; Yoo, M; Park, W-S; Lee, S J; Boo, Y C; Koh, J-S

    2011-12-01

    This study was conducted to evaluate the effects of a commercially available shampoo in Korean subjects with alopecia using a simple hand-held phototrichogram technique. Forty-four subjects with alopecia were enrolled and forty subjects continued for 16 weeks. In the test group, total hair counts increased significantly at weeks 8 and 16, and the number of shedding hair significantly decreased at week 16. Terminal hair counts significantly increased at week 8. In the control group, hair thickness and the number of vellus hairs significantly decreased at week 16. The number of total hairs significantly increased in the test group than in the control group at weeks 8 and 16. The number of shedding hairs significantly decreased in the test group than in the control group at week 16. Visual assessment using clinical digital images showed that the number of total hairs appeared to increase although there was no statistical significance. In this study, it was found that the test shampoo could prevent hair loss.

  5. Evaluation of a hand-held, computer-based intervention to promote early self-care behaviors after lung transplant

    PubMed Central

    Dabbs, Annette DeVito; Dew, Mary Amanda; Myers, Brad; Begey, Alex; Hawkins, Robert; Ren, Dianxu; Dunbar-Jacob, Jacqueline; Oconnell, Erin; McCurry, Kenneth R.

    2011-01-01

    Background Lung transplant recipients are expected to perform self-care behaviors to maximize transplant-related health outcomes. Despite high non-adherence rates in performing these self-care behaviors, and the dire clinical consequences of such non-adherence, interventions are lacking. Pocket Personal Assistant for Tracking Health (Pocket PATH) is a hand-held device developed for patients to record health data, review data trends, and report condition changes to the transplant team. Methods A pilot trial was conducted to compare self-care agency, self-care behaviors, and health-related quality of life (HRQOL) between recipients randomized to use Pocket PATH (n = 15) vs. standard care (n = 15) for the first two months following hospital discharge after lung transplantation. Results Baseline characteristics were equivalent across groups. Patients in the Pocket PATH group showed significantly higher ratings of self-care agency, performed self-care behaviors at significantly higher rates, and reported significantly better HRQOL than standard care controls. Conclusion Pocket PATH is more efficacious than standard care in promoting early self-care agency, self-care behaviors, and HRQOL in lung recipients. A large-scale randomized controlled trial is needed to test the impact of Pocket PATH on long-term self-care behaviors. PMID:19473201

  6. Simple hand-held devices for the efficient infection of plants with viral-encoding constructs by particle bombardment.

    PubMed

    Gal-On, A; Meiri, E; Elman, C; Gray, D J; Gaba, V

    1997-02-01

    An efficient method for infection of plants with a cloned potyvirus by particle bombardment has been described (Gal-On et al., 1995). A simplified method is described now whereby a vaccuum chamber and helium propulsive gas are not required to achieve a high efficiency of infection. The new device-the 'HandGun'--is hand-held, and easily constructed from readily available materials. With this technique it is possible to bombard soft plants and seedings that do not survive particle bombardment by other devices. bombardment of C. pepo plants with a full length clone of zucchini yellow mosaic potyvirus results in approximately 100% infection at 100 pg cDNA per plant using air or helium to propel the microprojectiles. The HandGun is 10(5)-fold more efficient than mechanical inoculation. Tungsten and gold were found to be the most efficient materials tested for use as microprojectiles. Crude extracts of plasmids from E. coli were found to be effective, as well as column-purified cDNA. A functional, simple version of the HandGun--'the Blowpipe'--was also constructed, which does not require an electrically controlled valve. Plants can be inoculated with plant viruses from sap with the HandGun. PMID:9029535

  7. Integrated optical detection of autonomous capillary microfluidic immunoassays:a hand-held point-of-care prototype.

    PubMed

    Novo, P; Chu, V; Conde, J P

    2014-07-15

    The miniaturization of biosensors using microfluidics has potential in enabling the development of point-of-care devices, with the added advantages of reduced time and cost of analysis with limits-of-detection comparable to those obtained through traditional laboratory techniques. Interfacing microfluidic devices with the external world can be difficult especially in aspects involving fluid handling and the need for simple sample insertion that avoids special equipment or trained personnel. In this work we present a point-of-care prototype system by integrating capillary microfluidics with a microfabricated photodiode array and electronic instrumentation into a hand-held unit. The capillary microfluidic device is capable of autonomous and sequential fluid flow, including control of the average fluid velocity at any given point of the analysis. To demonstrate the functionality of the prototype, a model chemiluminescence ELISA was performed. The performance of the integrated optical detection in the point-of-care prototype is equal to that obtained with traditional bench-top instrumentation. The photodiode signals were acquired, displayed and processed by a simple graphical user interface using a computer connected to the microcontroller through USB. The prototype performed integrated chemiluminescence ELISA detection in about 15 min with a limit-of-detection of ≈2 nM with an antibody-antigen affinity constant of ≈2×10(7) M(-1). PMID:24607579

  8. LIBS system with compact fiber spectrometer, head mounted spectra display and hand held eye-safe erbium glass laser gun

    NASA Astrophysics Data System (ADS)

    Myers, Michael J.; Myers, John D.; Sarracino, John T.; Hardy, Christopher R.; Guo, Baoping; Christian, Sean M.; Myers, Jeffrey A.; Roth, Franziska; Myers, Abbey G.

    2010-02-01

    LIBS (Laser Induced Breakdown Spectroscopy) systems are capable of real-time chemical analysis with little or no sample preparation. A Q-switched laser is configured such that laser induced plasma is produced on targeted material. Chemical element line spectra are created, collected and analyzed by a fiber spectrometer. Line spectra emission data is instantly viewed on a head mounted display. "Eye-safe" Class I erbium glass lasers provide for insitu LIBS applications without the need for eye-protection goggles. This is due to the fact that Megawatt peak power Q-switched lasers operating in the narrow spectral window between 1.5um and 1.6um are approximately 8000 times more "eye-safe" than other laser devices operating in the UV, visible and near infrared. In this work we construct and demonstrate a LIBS system that includes a hand held eye-safe laser gun. The laser gun is fitted with a micro-integrating sphere in-situ target interface and is designed to facilitate chemical analysis in remote locations. The laser power supply, battery pack, computer controller and spectrophotometer components are packaged into a utility belt. A head mounted display is employed for "hands free" viewing of the emitted line spectra. The system demonstrates that instant qualitative and semi-quantitative chemical analyses may be performed in remote locations utilizing lightweight commercially available system components ergonomically fitted to the operator.

  9. Task difficulty and inertial properties of hand-held tools: An assessment of their concurrent effects on precision aiming.

    PubMed

    Silva, Paula L; Bootsma, Reinoud J; Figueiredo, Priscilla Rezende Pereira; Avelar, Bruna Silva; de Andrade, André Gustavo Pereira; Fonseca, Sérgio T; Mancini, Marisa Cotta

    2016-08-01

    Aiming hand-held tools at targets in space entails adjustments in the dynamical organization of aiming patterns according to the required precision. We asked whether and how these adjustments are modified by the tool's mass distribution. Twelve participants performed reciprocal aiming movements with a 50-cm long wooden probe. Kinematic patterns of probe movements were used as a window into the behavioral dynamic underlying performance of a reciprocal aiming task. We crossed three levels of task difficulty (IDs 2.8, 4.5 and 6.1) with two types of probe varying in their mass distribution (proximal vs distal loading). Movement duration was affected by task difficulty and probe loading (shorter for larger targets and proximal probe loading). Progressive deviations from a sinusoidal movement pattern were observed as task difficulty increased. Such deviations were more pronounced with proximal probe loading. Results point to a higher degree of non-linearity in aiming dynamics when the probe was loaded proximally, which might reflect employment of additional perceptual-motor processes to control the position of its less stable tip at the vicinity of the targets. More generally, the effects of probe loading on aiming pattern and dynamics suggest that perceptual-motor processes responding to task level constraints are sensitive to, and not independent from, biomechanical, end-effector constraints.

  10. Test-retest reliabilities of hand-held dynamometer for lower-limb muscle strength in intellectual disabilities.

    PubMed

    Wuang, Yee-Pay; Chang, Jyh-Jong; Wang, Min-Hung; Lin, Hsiu-Ching

    2013-08-01

    The primary purpose of this study was to investigate the test-retest reliabilities of hand-held dynamometer (HDD) for measuring lower-limb muscle strength in intellectual disabilities (ID). The other purposes were to: (1) compare the lower-limb muscle strength between children with and without ID; (2) probe the relationship between the muscle forces and agility performance in ID; and (3) explore the factors associated with muscle strength in ID. Sixty-one participants (30 boys and 31 girls; mean age=14.1 ± 3.3 year) were assessed by the HDD using a "make" test. The comparative group consisted of 63 typically developing children (33 boys and 30 girls; mean age=14.9 ± 2.1 year). The ID group demonstrated lower muscle groups than in typically developing group. Except for the ankle plantarflexors (ICC=0.69, SEM=0.72), test-retest analysis showed good intrarater reliability with ICC ranging from 0.81 to 0.96, and intrarater SEM values ranged from 0.40 to 0.57. The HDD has the potential to be a reliable tool for strength measurement in ID. Muscle strength was positively related to agility performance. Regression analysis indicated that height, weight, BMI, and activity level were significant predictors of muscle strength in ID.

  11. The Fluostick, a real hand-held system for near-infrared fluorescence image-guided surgery

    NASA Astrophysics Data System (ADS)

    Dorval, Paul; Mangeret, Norman; Guillermet, Stephanie; Righini, Christian Adrien; Barabino, Gabriele; Rizo, Philippe; Poulet, Patrick

    2014-02-01

    Near-infrared fluorescence image-guided surgery, FIGS, has lately shown a huge potential in oncologic and lymphatic related surgeries. In some indications such as liver or heart surgery, fluorescence-reachable anatomic structures are limited by the access to the surgical field. Nevertheless, most of the systems available on the market are too large to image the sides of cavities. Small devices are clearly required to improve workability of fluorescence imaging systems. The current work describes the development of an instrument and the results of its evaluation. In order to image narrow area, we developed a small size device consisting of an optical head connected to a control box. The whole system, optical head, control box and software, receives a CE mark for clinical procedures. Building on existing technologies, we simplified the fluorescence imaging system. It consists of a custom charged-coupled device camera, a high color rendering index visible LED illumination and a Class1 Laser fluorophore excitation. With a curved shape of 25x35x150mm, the optical head was designed as a true hand-held probe. The field of view varies from 5x3.75cm to 2x1.5cm. The device is able to collect and display the signal of 5pmol of IndoCyanine Green (ICG) with a spatial resolution down to 70μm at 25 frames per second. The system has been evaluated in pre-clinical and clinical procedures. The preclinical studies confirmed the ability of the system to visualize tumors in mice models. Clinical evaluations includes lymphedema investigations and surgical resections of tumors in colorectal cancer.

  12. Subfoveal fluid in healthy full term newborns observed by hand-held Spectral Domain Optical Coherence Tomography

    PubMed Central

    Cabrera, Michelle T; Maldonado, Ramiro S; Toth, Cynthia A; O’Connell, Rachelle V; Chen, Bei Bei; Chiu, Stephanie J; Farsiu, Sina; Wallace, David K; Stinnett, Sandra S; Panayotti, Gabriela M Maradiaga; Swamy, Geeta K; Freedman, Sharon F

    2011-01-01

    Purpose To report retinal findings for healthy newborn infants imaged with hand held Spectral Domain Optical Coherence Tomography (SD-OCT). Design Prospective observational case series. Methods Thirty-nine full term newborn infants had dilated retinal examinations by indirect ophthalmoscopy and retinal imaging by handheld SD-OCT, without sedation, at the Duke Birthing Center. Results Of the 39 infants imaged, 44% (17/39) were male. Race/ethnicity composition was 56% white, 38% black, 3% Asian, and 3% Hispanic. Median gestational age was 39 weeks (range 36 to 41). Six of the 39 infants (15%) had bilateral subfoveal fluid on SD-OCT not seen by indirect ophthalmoscopy. Eight infants (21%) had retinal hemorrhages noted on dilated retinal examination, 1 of which had subretinal fluid on SD-OCT. Subretinal fluid was noted on follow up examination to have resolved on SD-OCT 1 to 4 months later. Infants with bilateral subretinal fluid had an older gestational age compared to infants without subretinal fluid (median 40.4 vs. 39.1 weeks, respectively, P=0.03) and were more likely to have had mothers with diabetes (2/6 vs. 0/33, respectively, P=0.02). Vaginal versus C-section delivery was not significantly different between the two groups. Conclusions Some healthy full term infants have bilateral subfoveal fluid not obvious on dilated retinal examination. This fluid resolves within several months. The visual significance of this finding is unknown, but clinicians should be aware it is common when evaluating newborn infants for retinal pathology using SD-OCT. PMID:21925640

  13. Development of a low-cost hand-held system for optical coherence tomography imaging (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Pande, Paritosh; Shelton, Ryan L.; Monroy, Guillermo L.; Nolan, Ryan M.; Boppart, Stephen A.

    2016-03-01

    We report the development of a low-cost hand-held optical coherence imaging system. The proposed system is based on the principle of linear optical coherence tomography (Linear OCT), a technique which was proposed in the early 2000s as a simpler alternative to the conventional time-domain and Fourier-domain OCT. In our design, as in the traditional Michaelson interferometer, light from a broadband source is split into sample and reference beams. Unlike in a Michaelson interferometer though, upon return, a tilt is introduced to the reference beam before it is combined with the sample beam to illuminate a detector array. The resulting fringe pattern encodes information about the relative time-of-flight of photons between the sample and reference arms, which can be decoded by standard signal processing techniques to obtain depth resolved reflectivity profiles of the sample. The axial resolution and the SNR of our system was measured to be approximately 5.2 μm and 80 dB, respectively. The performance of the proposed system was compared with a standard state-of-the-art Fourier-domain low coherence interferometry (LCI) system by imaging several biological and non-biological samples. The results of this study indicate that the proposed low-cost system might be a suitable choice for applications where the imaging depth and SNR can be traded for lower cost and simpler optical design. Two potentially useful applications of the proposed imaging system could be for imaging the human tympanic membrane (TM) for diagnosing middle ear pathologies, and to visualize the sub-surface features of materials for non-destructive evaluation and quality inspection.

  14. Short-term measurement of linear growth in preterm infants: validation of a hand-held knemometer.

    PubMed

    Michaelsen, K F; Skov, L; Badsberg, J H; Jørgensen, M

    1991-11-01

    A hand-held electronic knemometer, resembling a pair of callipers, for measuring knee-heel length in preterm infants was developed to improve the accuracy of measuring linear growth velocity in infants. The measuring system is based on a magnetic encoder and has a resolution of 0.01 mm. The knee-heel length is recorded automatically when the pressure applied on the heel reaches a preset value. The result of a measurement sequence is expressed as the average of five sequential readings. The error of one measurement sequence was 0.82 mm, corresponding to a coefficient of variation of 0.8% or 2 d of growth in knee-heel length. It includes the technical error and an error component due to the correlation of the readings within a series. The estimated error on the measurement of the knee-heel growth velocity (expressed as mm/d), measured over a 3-wk period, was 0.04 mm, corresponding to a coefficient of variation of 8%. Longitudinal growth data from 11 healthy preterm infants (birth weight 918-1482 g) are presented. Knee-heel length velocity from birth until day of regained birth weight was similar to the velocity during the following weeks, showing that there was no deceleration of growth immediately after birth. In conclusion, the method is accurate and gentle in measuring linear growth velocity over short periods and can be useful in monitoring the progress of ill infants and in growth studies of preterm and mature infants, in which linear growth is a more relevant short-term outcome than weight gain. PMID:1754302

  15. Determination of soluble solids content and titratable acidity of intact fruit and juice of Satsuma mandarin using a hand-held NIR instrument in transmittance mode

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Determination of soluble solids content (SSC) and titratable acidity (TA) of intact fruit and juice of Satsuma mandarin was investigated using a hand-held NIR instrument “NIR-Gun” in transmittance mode. The resulting calibration equation measured SSC of intact fruit and juice with a standard error o...

  16. Evaluating the Reliability of a Novel Neck-Strength Assessment Protocol for Healthy Adults Using Self-Generated Resistance with a Hand-Held Dynamometer

    PubMed Central

    Beaudet, Danielle; Greenbaum, Marla; Hellyer, Leah; Tritton, Amanda; Walton, Dave

    2015-01-01

    ABSTRACT Purpose: To evaluate the intra- and inter-session test–retest agreement of a novel neck-strength assessment protocol using a hand-held dynamometer. Background: A literature review found a lack of neck-strength assessment protocols that are both portable and reliable. Hand-held dynamometry is a portable and inexpensive method of assessing muscle strength, but it is not commonly used for neck-strength assessment. Methods: A hand-held dynamometer was used to evaluate neck strength in 30 healthy participants. The device measured maximum force in cervical flexion, extension, side flexion, side flexion with rotation, and pure rotation, using the ipsilateral hand to apply isometric resistance over 3 seconds. Three measurements were taken over 6–8 days. Results: Test–retest intra-class correlation coefficients (ICCs) showed high reliability, ranging from 0.94 to 0.97 for all tested directions from Trial 1 to Trial 2 (intra-session reliability, ICC [2,1], absolute). ICC values demonstrated good to high inter-session reliability, ranging from 0.87 to 0.95 for all tested directions from Trial 1 to Trial 3 (ICC [2,1], absolute). Conclusion: The results suggest that the five test positions of the neck and upper-quadrant strength assessment protocol can be performed using hand-held dynamometry with good to high reliability. PMID:25931654

  17. Comparison of Hand-Held Test Kits, Immunofluorescence Microscopy, Enzyme-Linked Immunosorbent Assay, and Flow Cytometric Analysis for Rapid Presumptive Identification of Yersinia pestis▿

    PubMed Central

    Tomaso, H.; Thullier, P.; Seibold, E.; Guglielmo, V.; Buckendahl, A.; Rahalison, L.; Neubauer, H.; Scholz, H. C.; Splettstoesser, W. D.

    2007-01-01

    An in-house immunochromatographic test, Plague BioThreat Alert test strips, ABICAP columns, enzyme-linked immunosorbent assay, flow cytometry, and immunofluorescence microscopy were compared for the detection of the fraction 1 capsular antigen of Yersinia pestis, using spiked buffer and clinical specimens. Hand-held test kits proved to be excellent benchtop tools. PMID:17652472

  18. So the Kids Are Busy, What Now? Teacher Perceptions of the Use of Hand-Held Game Consoles in West Australian Primary Classrooms

    ERIC Educational Resources Information Center

    O'Rourke, John; Main, Susan; Ellis, Michelle

    2013-01-01

    Games technology in the form of hand-held game consoles (HGCs) when focussed on specific academic skill development has the capacity to engage students in learning and in turn produce positive academic results. This current research explores teacher perceptions of the implementation of HGCs to enhance the development of mental maths skills (namely…

  19. An Examination of Hand-Held Computer-Assisted Instruction on Subtraction Skills for Second Grade Students with Learning and Behavioral Disabilities

    ERIC Educational Resources Information Center

    Nordness, Philip D.; Haverkost, Ann; Volberding, Annette

    2011-01-01

    The effect of a mathematic flashcard application on a hand-held computing device was examined across three individual second grade students with learning and behavioral disabilities. All of the students improved their subtraction scores by an average of 17% as measured by the district-created, curriculum-based assessment. The results of this study…

  20. Intra-operative ultrasound hand-held strain imaging for the visualization of ablations produced in the liver with a toroidal HIFU transducer: first in vivo results

    PubMed Central

    Chenot, Jérémy; Melodelima, David; N'Djin, William Apoutou; Souchon, Rémi; Rivoire, Michel; Chapelon, Jean-Yves

    2010-01-01

    The use of hand-held ultrasound strain imaging for intra-operative real-time visualization of HIFU ablations produced in the liver by a toroidal transducer was investigated. A linear 12 MHz ultrasound imaging probe was used to obtain radiofrequency signals. Using a fast cross-correlation algorithm, strain images were calculated and displayed at 60 frames/s, allowing the use of hand-held strain imaging intra-operatively. Fourteen HIFU lesions were produced in 4 pigs. Intra-operative strain imaging of HIFU ablations in the liver was feasible owing to the high frame rate. The correlation between dimensions measured on gross pathology and dimensions measured on B-mode images and on strain images were R = 0.72 and R = 0.94 respectively. The contrast between ablated and non-ablated tissue was significantly higher (p<0.05) in the strain images (22 dB) than in the B-mode images (9 dB). Strain images allowed equivalent or improved definition of ablated regions when compared with B-mode images. Real-time intra-operative hand-held strain imaging seems to be a promising complement to conventional B-Mode imaging for the guidance of HIFU ablations produced in the liver during an open procedure. These results support that hand-held strain imaging outperforms conventional B-mode ultrasound and could potentially be used for assessment of thermal therapies. PMID:20479514

  1. Validation of a hand-held X-ray absorptiometer caliper against computerized tomography for in vivo soft tissue composition analysis

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Objective: To develop and validate a hand-held caliper which uses a dual-energy radioactive source to monitor regional changes in mid-thigh muscle mass and % fat. Methods: Optimum photon energies were determined by minimization of uncertainties in fat content measurements due to photon count statist...

  2. Inter-Tester Reliability and Precision of Manual Muscle Testing and Hand-Held Dynamometry in Lower Limb Muscles of Children with Spina Bifida

    ERIC Educational Resources Information Center

    Mahony, Kate; Hunt, Adrienne; Daley, Deborah; Sims, Susan; Adams, Roger

    2009-01-01

    Reliability and measurement precision of manual muscle testing (MMT) and hand-held dynamometry (HHD) were compared for children with spina bifida. Strength measures were obtained of the hip flexors, hip abductors, and knee extensors of 20 children (10 males, 10 females; mean age 9 years 10 months; range: 5 to 15 years) by two experienced physical…

  3. Beyond Textbook Illustrations: Hand-Held Models of Ordered DNA and Protein Structures as 3D Supplements to Enhance Student Learning of Helical Biopolymers

    ERIC Educational Resources Information Center

    Jittivadhna, Karnyupha; Ruenwongsa, Pintip; Panijpan, Bhinyo

    2010-01-01

    Textbook illustrations of 3D biopolymers on printed paper, regardless of how detailed and colorful, suffer from its two-dimensionality. For beginners, computer screen display of skeletal models of biopolymers and their animation usually does not provide the at-a-glance 3D perception and details, which can be done by good hand-held models. Here, we…

  4. Evaluation of surface lead migration in pre-1950 homes: an on-site hand-held X-ray fluorescence spectroscopy study.

    PubMed

    Balasubramanian, V; Spear, T M; Hart, J F; Larson, J D

    2011-06-01

    Lead-paint concentration on specific surfaces (walls, floors, windowsills, etc.) in pre-1950 homes was measured using a hand-held X-ray fluorescence (XRF) spectroscope. Surface lead was examined concomitantly using wipe sampling and XRF Lead was detected in all 147 samples via XRF; and of these, 29 ( 20%) revealed surface lead contamination via wipe sampling. Seventeen of the positive wipe samples were collected from surfaces with clear visible defects, while 12 samples were collected from surfaces with no visible defects. Curve fitting of surface to lead-paint concentrations generated empirical relationships that described the migration of lead from inner layers at locations with and without visible defects. Curve fitting indicated that lead migration was power-law dependent when surface defects were present and linear when no defects were visible. These correlations may assist surveyors in predicting lead migration to the surface from lead-paint concentration measured with a hand-held XRF instrument. PMID:21667719

  5. Improving the accuracy of hand-held X-ray fluorescence spectrometers as a tool for monitoring brominated flame retardants in waste polymers.

    PubMed

    Guzzonato, A; Puype, F; Harrad, S J

    2016-09-01

    An optimised method for Br quantification as a metric of brominated flame retardant (BFR) concentrations present in Waste Electrical and Electronic Equipment (WEEE) polymers is proposed as an alternative to the sophisticated, yet time consuming GC-MS methods currently preferred. A hand-held X-ray fluorescence (XRF) spectrometer was validated with Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS). Customized standard materials of specific BFRs in a styrenic polymer were used to perform an external calibration for hand-held XRF ranging from 0.08 to 12 wt% of Br, and cross-checking with LA-ICP-MS having similar LODs (0.0004 wt% for LA-ICP-MS and 0.0011 wt% for XRF). The "thickness calibration" developed here for hand-held XRF and the resulting correction, was applied to 28 real samples and showed excellent (R(2) = 0.9926) accordance with measurements obtained via LA-ICP-MS. This confirms the validity of hand-held XRF as an accurate technique for the determination of Br in WEEE plastics. This is the first use of solid standards to develop a thickness-corrected quantitative XRF measurement of Br in polymers using LA-ICP-MS for method evaluation. Thermal desorption gas chromatography mass spectrometry (TD-GC-MS) was used to confirm the presence of specific BFRs in WEEE polymer samples. We propose that expressing limit values for BFRs in waste materials in terms of Br rather than BFR concentration (based on a conservative assumption about the BFR present), presents a practical solution to the need for an accurate, yet rapid and inexpensive technique capable of monitoring compliance with limit values in situ.

  6. Improving the accuracy of hand-held X-ray fluorescence spectrometers as a tool for monitoring brominated flame retardants in waste polymers.

    PubMed

    Guzzonato, A; Puype, F; Harrad, S J

    2016-09-01

    An optimised method for Br quantification as a metric of brominated flame retardant (BFR) concentrations present in Waste Electrical and Electronic Equipment (WEEE) polymers is proposed as an alternative to the sophisticated, yet time consuming GC-MS methods currently preferred. A hand-held X-ray fluorescence (XRF) spectrometer was validated with Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS). Customized standard materials of specific BFRs in a styrenic polymer were used to perform an external calibration for hand-held XRF ranging from 0.08 to 12 wt% of Br, and cross-checking with LA-ICP-MS having similar LODs (0.0004 wt% for LA-ICP-MS and 0.0011 wt% for XRF). The "thickness calibration" developed here for hand-held XRF and the resulting correction, was applied to 28 real samples and showed excellent (R(2) = 0.9926) accordance with measurements obtained via LA-ICP-MS. This confirms the validity of hand-held XRF as an accurate technique for the determination of Br in WEEE plastics. This is the first use of solid standards to develop a thickness-corrected quantitative XRF measurement of Br in polymers using LA-ICP-MS for method evaluation. Thermal desorption gas chromatography mass spectrometry (TD-GC-MS) was used to confirm the presence of specific BFRs in WEEE polymer samples. We propose that expressing limit values for BFRs in waste materials in terms of Br rather than BFR concentration (based on a conservative assumption about the BFR present), presents a practical solution to the need for an accurate, yet rapid and inexpensive technique capable of monitoring compliance with limit values in situ. PMID:27281541

  7. Motion-compensated hand-held common-path Fourier-domain optical coherence tomography probe for image-guided intervention

    PubMed Central

    Huang, Yong; Liu, Xuan; Song, Cheol; Kang, Jin U.

    2012-01-01

    A motion-compensated, hand-held, common-path, Fourier-domain optical coherence tomography imaging probe has been developed for image-guided intervention during microsurgery. A hand-held prototype instrument was achieved by integrating an imaging fiber probe inside a stainless steel needle and attached to the ceramic shaft of a piezoelectric motor housed in an aluminum handle. The fiber probe obtains A-scan images. The distance information was extracted from the A-scans to track the sample surface distance and a fixed distance was maintained by a feedback motor control which effectively compensated hand tremor and target movements in the axial direction. Real-time data acquisition, processing, motion compensation, and image visualization and saving were implemented on a custom CPU-GPU hybrid architecture. We performed 10× zero padding to the raw spectrum to obtain 0.16 µm position accuracy with a compensation rate of 460 Hz. The root-mean-square error of hand-held distance variation from target position was measured to be 2.93 µm. We used a cross-correlation maximization-based shift correction algorithm for topology correction. To validate the system, we performed free-hand OCT M-scan imaging using various samples. PMID:23243562

  8. Between-day reliability of a hand-held dynamometer and surface electromyography recordings during isometric submaximal contractions in different shoulder positions.

    PubMed

    Andersen, Kathrine S; Christensen, Birgitte H; Samani, Afshin; Madeleine, Pascal

    2014-10-01

    Functional shoulder assessments require the use of objective and reliable standardized outcome measures. Therefore, the aim of this study was to examine the between-day reliability of a hand-held dynamometer when measuring muscle strength during flexion, abduction, and internal and external rotation as well as surface electromyography (EMG) when measuring muscle activity from m. trapezius superior and deltoideus anterior. Twenty-four healthy subjects participated and performed four isometric contractions measured with a hand-held dynamometer and EMG. Both relative and absolute reliability were calculated based on the mean of the last three of the four repetitions. EMG amplitude was assessed calculating both absolute and normalized root-mean-square (RMS) values. The reliability of the hand-held dynamometer was high (LOA=3.2-7.6% and ICC=0.89-0.98). The absolute reliability for EMG showed similar results for absolute RMS values (LOA=20.0-68.4%) and normalized RMS values (LOA=42.4-66.5%). However, the results concerning the relative reliability showed higher ICC for absolute RMS values (ICC=0.82-0.92) compared with normalized values (ICC=0.57-0.72).The outcome measurements of this study with healthy subjects were found reliable and, therefore, have the potential to detect changes in muscle strength and muscle activity.

  9. Micro-fluidic (Lab-on the- Chip) PCR Array Cartridge for Biological Screening in a Hand Held Device: FInal Report for CRADA no 264. PNNL-T2-258-RU with CombiMatrix Corp

    SciTech Connect

    Rainina, Evguenia I.

    2010-10-31

    The worldwide emergence of both new and old diseases resulting from human expansion and also human and materials mobility has and will continue to place stress on both medical and clinical diagnostics. The classical approach to bioagents detection involves the use of differential metabolic assays to determine species type in the case of most bacteria, or the use of cell culture and electron microscopy to diagnose viruses and some bacteria that are intracellular parasites. The long-term goal in bioagent detection is to develop a hand-held instrument featuring disposable cartridges which contain all the necessary reagents, reaction chambers, waste chambers, and micro-fluidics to extract, concentrate, amplify, and analyze nucleic acids. This GIPP project began development of a sensory platform using nucleic-acid based probes. Although research was not completed, initial findings indicated that an advanced sensing device could theoretically be built on a DNA/RNA-based technology platform.

  10. Efficacy and learning curve of a hand-held echocardiography device in an oncology outpatient clinic: Expanding the use of echoscopic heart examination beyond cardiology

    PubMed Central

    PéREZ DE ISLA, LEOPOLDO PÉREZ; MORENO, FERNANDO; GARCIA SAEZ, JOSE ANGEL GARCIA; CLAVERO, MATIAS; MORENO, NUNO; AGUADO DE LA ROSA, CARLOS AGUADO; DE AGUSTIN, JOSE ALBERTO; GOMEZ DE DIEGO, JOSE JUAN GOMEZ; COBOS, MIGUEL ANGEL; SALTIJERAL, ADRIANA; MACAYA, CARLOS; GARCIA-FERNANDEZ, MIGUEL ANGEL

    2015-01-01

    Certain chemotherapy drugs for breast cancer may induce cardiotoxicity and these patients should be echocardiographically monitored. The performance of a focused echocardiographic evaluation (echoscopy) at the patient's location by a non-cardiologist appears to be feasible. The aim of the present study was to assess the accuracy of echoscopy performed by medical oncologists in an outpatient clinic using hand-held echocardiography devices. The study cohort comprised consecutive unselected patients who attended an oncology outpatient clinic. Two medical oncologists attended a one-week training period, which included theoretical and practical teaching by an expert cardiologist. Every subject underwent two echo examinations. The first examination was performed by an oncologist using a hand-held echo device and the second was performed by a cardiologist using a ‘premium’ device. Out of the 101 enrolled patients, 32 were men (31.7%) and the mean age was 56.03±16.88 years. There was a good global agreement [intra-class correlation coefficient (ICC): 0.65 for left ventricular ejection fraction (LVEF)]. When the results were analyzed depending on the period of time when the echo studies were performed, a clear and short learning curve was observed: LVEF started at ICC=0.58 and increased to 0.66 and 0.77 in the second and third period, respectively. There were extremely few clinically significant differences and a learning curve was also evident. In conclusion, cardiac echoscopy performed by an oncologist with a hand-held device may lead to a similar clinical management as a study performed by an expert cardiologist with a ‘premium’ system in patients under chemotherapy following a short training period. PMID:26171188

  11. Portable computing for taking part of the lab to the sample types of applications. From hand held personal digital assistants to smart phones for mobile spectrometry

    NASA Astrophysics Data System (ADS)

    Weagant, Scott; Karanassios, Vassili

    2015-06-01

    The use of portable hand held computing devices for the acquisition of spectrochemical data is briefly discussed using examples from the author's laboratory. Several network topologies are evaluated. At present, one topology that involves a portable computing device for data acquisition and spectrometer control and that has wireless access to the internet at one end and communicates with a smart phone at the other end appears to be better suited for "taking part of the lab to the sample" types of applications. Thus, spectrometric data can be accessed from anywhere in the world.

  12. Into the Wild: Neuroergonomic Differentiation of Hand-Held and Augmented Reality Wearable Displays during Outdoor Navigation with Functional Near Infrared Spectroscopy.

    PubMed

    McKendrick, Ryan; Parasuraman, Raja; Murtza, Rabia; Formwalt, Alice; Baccus, Wendy; Paczynski, Martin; Ayaz, Hasan

    2016-01-01

    Highly mobile computing devices promise to improve quality of life, productivity, and performance. Increased situation awareness and reduced mental workload are two potential means by which this can be accomplished. However, it is difficult to measure these concepts in the "wild". We employed ultra-portable battery operated and wireless functional near infrared spectroscopy (fNIRS) to non-invasively measure hemodynamic changes in the brain's Prefrontal cortex (PFC). Measurements were taken during navigation of a college campus with either a hand-held display, or an Augmented reality wearable display (ARWD). Hemodynamic measures were also paired with secondary tasks of visual perception and auditory working memory to provide behavioral assessment of situation awareness and mental workload. Navigating with an augmented reality wearable display produced the least workload during the auditory working memory task, and a trend for improved situation awareness in our measures of prefrontal hemodynamics. The hemodynamics associated with errors were also different between the two devices. Errors with an augmented reality wearable display were associated with increased prefrontal activity and the opposite was observed for the hand-held display. This suggests that the cognitive mechanisms underlying errors between the two devices differ. These findings show fNIRS is a valuable tool for assessing new technology in ecologically valid settings and that ARWDs offer benefits with regards to mental workload while navigating, and potentially superior situation awareness with improved display design. PMID:27242480

  13. Into the Wild: Neuroergonomic Differentiation of Hand-Held and Augmented Reality Wearable Displays during Outdoor Navigation with Functional Near Infrared Spectroscopy.

    PubMed

    McKendrick, Ryan; Parasuraman, Raja; Murtza, Rabia; Formwalt, Alice; Baccus, Wendy; Paczynski, Martin; Ayaz, Hasan

    2016-01-01

    Highly mobile computing devices promise to improve quality of life, productivity, and performance. Increased situation awareness and reduced mental workload are two potential means by which this can be accomplished. However, it is difficult to measure these concepts in the "wild". We employed ultra-portable battery operated and wireless functional near infrared spectroscopy (fNIRS) to non-invasively measure hemodynamic changes in the brain's Prefrontal cortex (PFC). Measurements were taken during navigation of a college campus with either a hand-held display, or an Augmented reality wearable display (ARWD). Hemodynamic measures were also paired with secondary tasks of visual perception and auditory working memory to provide behavioral assessment of situation awareness and mental workload. Navigating with an augmented reality wearable display produced the least workload during the auditory working memory task, and a trend for improved situation awareness in our measures of prefrontal hemodynamics. The hemodynamics associated with errors were also different between the two devices. Errors with an augmented reality wearable display were associated with increased prefrontal activity and the opposite was observed for the hand-held display. This suggests that the cognitive mechanisms underlying errors between the two devices differ. These findings show fNIRS is a valuable tool for assessing new technology in ecologically valid settings and that ARWDs offer benefits with regards to mental workload while navigating, and potentially superior situation awareness with improved display design.

  14. Development of a high-speed VCSEL OCT system for real-time imaging of conscious patients larynx using a hand-held probe (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Rangarajan, Swathi; Chou, Li-Dek; Coughlan, Carolyn; Sharma, Giriraj; Wong, Brian J. F.; Ramalingam, Tirunelveli S.

    2016-02-01

    Fourier domain optical coherence tomography (FD-OCT) is a noninvasive imaging modality that has previously been used to image the human larynx. However, differences in anatomical geometry and short imaging range of conventional OCT limits its application in a clinical setting. In order to address this issue, we have developed a gradient-index (GRIN) lens rod-based hand-held probe in conjunction with a long imaging range 200 kHz Vertical-Cavity Surface Emitting Lasers (VCSEL) swept-source optical coherence tomography (SS-OCT) system for high speed real-time imaging of the human larynx in an office setting. This hand-held probe is designed to have a long and dynamically tunable working distance to accommodate the differences in anatomical geometry of human test subjects. A nominal working distance (~6 cm) of the probe is selected to have a lateral resolution <100 um within a depth of focus of 6.4 mm, which covers more than half of the 12 mm imaging range of the VCSEL laser. The maximum lateral scanning range of the probe at 6 cm working distance is approximately 8.4 mm, and imaging an area of 8.5 mm by 8.5 mm is accomplished within a second. Using the above system, we will demonstrate real-time cross-sectional OCT imaging of larynx during phonation in vivo in human and ex-vivo in pig vocal folds.

  15. Into the Wild: Neuroergonomic Differentiation of Hand-Held and Augmented Reality Wearable Displays during Outdoor Navigation with Functional Near Infrared Spectroscopy

    PubMed Central

    McKendrick, Ryan; Parasuraman, Raja; Murtza, Rabia; Formwalt, Alice; Baccus, Wendy; Paczynski, Martin; Ayaz, Hasan

    2016-01-01

    Highly mobile computing devices promise to improve quality of life, productivity, and performance. Increased situation awareness and reduced mental workload are two potential means by which this can be accomplished. However, it is difficult to measure these concepts in the “wild”. We employed ultra-portable battery operated and wireless functional near infrared spectroscopy (fNIRS) to non-invasively measure hemodynamic changes in the brain’s Prefrontal cortex (PFC). Measurements were taken during navigation of a college campus with either a hand-held display, or an Augmented reality wearable display (ARWD). Hemodynamic measures were also paired with secondary tasks of visual perception and auditory working memory to provide behavioral assessment of situation awareness and mental workload. Navigating with an augmented reality wearable display produced the least workload during the auditory working memory task, and a trend for improved situation awareness in our measures of prefrontal hemodynamics. The hemodynamics associated with errors were also different between the two devices. Errors with an augmented reality wearable display were associated with increased prefrontal activity and the opposite was observed for the hand-held display. This suggests that the cognitive mechanisms underlying errors between the two devices differ. These findings show fNIRS is a valuable tool for assessing new technology in ecologically valid settings and that ARWDs offer benefits with regards to mental workload while navigating, and potentially superior situation awareness with improved display design. PMID:27242480

  16. Motion-compensated hand-held common-path Fourier-domain optical coherence tomography probe for image-guided intervention

    NASA Astrophysics Data System (ADS)

    Huang, Yong; Song, Cheol; Liu, Xuan; Kang, Jin U.

    2013-03-01

    A motion-compensated hand-held common-path Fourier-domain optical coherence tomography imaging probe has been developed for image guided intervention during microsurgery. A hand-held prototype instrument was designed and fabricated by integrating an imaging fiber probe inside a stainless steel needle which is attached to the ceramic shaft of a piezoelectric motor housed in an aluminum handle. The fiber probe obtains A-scan images. The distance information was extracted from the A-scans to track the sample surface distance and a fixed distance was maintained by a feedback motor control which effectively compensated hand tremor and target movements in the axial direction. Graphical user interface, real-time data processing, and visualization based on a CPU-GPU hybrid programming architecture were developed and used in the implantation of this system. To validate the system, free-hand optical coherence tomography images using various samples were obtained. The system can be easily integrated into microsurgical tools and robotics for a wide range of clinical applications. Such tools could offer physicians the freedom to easily image sites of interest with reduced risk and higher image quality.

  17. A common-path optical coherence tomography distance-sensor based surface tracking and motion compensation hand-held microsurgical tool

    NASA Astrophysics Data System (ADS)

    Zhang, Kang; Gehlbach, Peter; Kang, Jin U.

    2011-03-01

    Microsurgery requires constant attention to the involuntary motion due to physiological tremors. In this work, we demonstrated a simple and compact hand-held microsurgical tool capable of surface tracking and motion compensation based on common-path optical coherence tomography (CP-OCT) distance-sensor to improve the accuracy and safety of microsurgery. This tool is miniaturized into a 15mm-diameter plastic syringe and capable of surface tracking at less than 5 micrometer resolution. A phantom made with Intralipid layers is used to simulate a real tissue surface and a single-fiber integrated micro-dissector works as a surgical tip to perform tracking and accurate incision on the phantom surface. The micro-incision depth is evaluated after each operation through a fast 3D scanning by the Fourier domain OCT system. The results using the surface tracking and motion compensation tool show significant improvement compared to the results by free-hand.

  18. Suitability of capillary blood obtained by a minimally invasive lancet technique to detect subclinical ketosis in dairy cows by using 3 different electronic hand-held devices.

    PubMed

    Kanz, P; Drillich, M; Klein-Jöbstl, D; Mair, B; Borchardt, S; Meyer, L; Schwendenwein, I; Iwersen, M

    2015-09-01

    The objective of this study was to evaluate the suitability of capillary blood obtained by a minimally invasive lancet technique to detect subclinical ketosis in 49 prepartum and 191 postpartum Holstein-Friesian cows using 3 different electronic hand-held devices [FreeStyle Precision (FSP, Abbott), GlucoMen LX Plus (GLX, A. Menarini), NovaVet (NOV, Nova Biomedical)]. The β-hydroxybutyrate (BHBA) concentration in serum harvested from coccygeal blood samples was analyzed in a laboratory and used as a reference value. Capillary samples were obtained from the skin of the exterior vulva by using 1 of 3 different lancets. In all samples, the concentration of BHBA was immediately analyzed with all 3 hand-held devices used in random order. All lancets used in the study were eligible for capillary blood collection but differed in the total number of incisions needed. Spearman correlation coefficients between the BHBA concentrations in capillary blood and the reference test were highly significant with 83% for the FSP, 73% for the NOV, and 63% for the GLX. Using capillary blood, the FSP overestimated the mean BHBA concentration compared with the reference test (+0.08 mmol/L), whereas the GLX and NOV underestimated the mean concentration (-0.07 and -0.01 mmol/L). When a BHBA concentration of 1.2 mmol/L in serum was used to define subclinical ketosis, the corresponding analyses of receiver operating characteristics resulted in optimized thresholds for capillary blood of 1.1 mmol/L for the NOV and GLX devices, and of 1.0 mmol/L for the FSP. Based on these thresholds, sensitivities (Se) and specificities (Sp) were 89 and 84% for the NOV, 80 and 89% for the GLX, and 100 and 76% for the FSP. Based on a serum BHBA concentration of 1.4 mmol/L, analyses of receiver operating characteristics resulted in optimized cut-offs of 1.4 mmol/L for the FSP (Se 100%, Sp 92%), 1.3 mmol/L for the NOV (Se 80%, Sp 95%), and 1.1 mmol/L (Se 90%, Sp 85%) for the GLX. Using these optimized thresholds

  19. Development of a Minimum Performance Standard for Hand-Held Fire Extinguishers as a Replacement for Halon 1211 on Civilian Transport Category Aircraft

    NASA Astrophysics Data System (ADS)

    Webster, Harry

    2002-08-01

    One or more Halon 1211 hand-held fire extinguishers are specified in Federal Aviation Regulation (FAR) Part 25.851 as a requirement on transport category aircraft with 31 or more seats. Halon 1211 has been linked to the destruction of the ozone layer and production of new Halon 1211 has been halted per the Montreal Protocol in 1993. The phase out of Halon 1211, as the hand-held firefighting agent of choice, for civilian transport category aircraft has necessitated the development of a Minimum Performance Standard (MPS) to evaluate replacement agents. The purpose of the MPS is to insure that there is no reduction in safety, both in terms of effectiveness in fighting onboard fires and toxicity to the passengers and crew. The MPS specifies two new tests that replacement agents must pass in addition to requiring national certifications such as provided by Underwriters Laboratories. The first test evaluates the "flooding" characteristics of the agent against a hidden in-flight fire. This test determines the ability of a streaming agent to function as a flooding agent. The second test evaluates the performance of the agent in fighting a terrorist fire scenario and the associated toxicity hazard. This test measures the agent's ability to extinguish a triple-seat fire in an aircraft cabin under in-flight conditions and the toxicity characteristics of both the neat agent and the products of decomposition. This MPS will insure that the replacement agents will meet or exceed the performance of Halon 1211 both in fighting fires and maintaining a safe breathing environment in aircraft cabins.

  20. Hand-held survey probe

    DOEpatents

    Young, Kevin L [Idaho Falls, ID; Hungate, Kevin E [Idaho Falls, ID

    2010-02-23

    A system for providing operational feedback to a user of a detection probe may include an optical sensor to generate data corresponding to a position of the detection probe with respect to a surface; a microprocessor to receive the data; a software medium having code to process the data with the microprocessor and pre-programmed parameters, and making a comparison of the data to the parameters; and an indicator device to indicate results of the comparison. A method of providing operational feedback to a user of a detection probe may include generating output data with an optical sensor corresponding to the relative position with respect to a surface; processing the output data, including comparing the output data to pre-programmed parameters; and indicating results of the comparison.

  1. Hand-held UXO Discriminator

    SciTech Connect

    Gasperikova, E.; Smith, J.T.; Kappler, K.N.; Ratti, A.; Morrison, H.F.; Becker, A.

    2010-04-01

    With prior funding (UX-1225, MM-0437, and MM-0838), we have successfully designed and built a cart-mounted Berkeley UXO Discriminator (BUD) and demonstrated its performance at various test sites (e.g., Gasperikova et al., 2007, 2009). It is a multi-transmitter multi-receiver active electromagnetic system that is able to discriminate UXO from scrap at a single measurement position, hence eliminates equirement of a very accurate sensor location. The cart-mounted system comprises of three orthogonal transmitters and eight pairs of differenced receivers (Smith et al., 2007). Receiver coils are located on ymmetry lines through the center of the system and see identical fields during the on-time of the pulse in all of the transmitter coils. They can then be wired in opposition to produce zero output during the n-ime of the pulses in three orthogonal transmitters. Moreover, this configuration dramatically reduces noise in the measurements by canceling the background electromagnetic fields (these fields are uniform ver the scale of the receiver array and are consequently nulled by the differencing operation), and by canceling the noise contributed by the tilt of the receivers in the Earth's magnetic field, and therefore reatly enhances receivers sensitivity to the gradients of the target.

  2. A new integrated approach for characterizing the soil electromagnetic properties and detecting landmines using a hand-held vector network analyzer

    NASA Astrophysics Data System (ADS)

    Lopera, Olga; Lambot, Sebastien; Slob, Evert; Vanclooster, Marnik; Macq, Benoit; Milisavljevic, Nada

    2006-05-01

    The application of ground-penetrating radar (GPR) in humanitarian demining labors presents two major challenges: (1) the development of affordable and practical systems to detect metallic and non-metallic antipersonnel (AP) landmines under different conditions, and (2) the development of accurate soil characterization techniques to evaluate soil properties effects and determine the performance of these GPR-based systems. In this paper, we present a new integrated approach for characterizing electromagnetic (EM) properties of mine-affected soils and detecting landmines using a low cost hand-held vector network analyzer (VNA) connected to a highly directive antenna. Soil characterization is carried out using the radar-antenna-subsurface model of Lambot et al.1 and full-wave inversion of the radar signal focused in the time domain on the surface reflection. This methodology is integrated to background subtraction (BS) and migration to enhance landmine detection. Numerical and laboratory experiments are performed to show the effect of the soil EM properties on the detectability of the landmines and how the proposed approach can ameliorate the GPR performance.

  3. Same-session and between-day intra-rater reliability of hand-held dynamometer measurements of isometric shoulder extensor strength

    PubMed Central

    Awatani, Takenori; Mori, Seigo; Shinohara, Junji; Koshiba, Hiroya; Nariai, Miki; Tatsumi, Yasutaka; Nagata, Akinori; Morikita, Ikuhiro

    2016-01-01

    [Purpose] The purpose of present study was to establish the same-session and between-day intra-rater reliability of measurements of extensor strength in the maximum abducted position (MABP) using hand-held dynamometer (HHD). [Subjects] Thirteen healthy volunteers (10 male, 3 female; mean ± SD: age 19.8 ± 0.8 y) participated in the study. [Methods] Participants in the prone position with maximum abduction of shoulder were instructed to hold the contraction against the ground reaction force, and peak isometric force was recorded using the HHD on the floor. Participants performed maximum isometric contractions lasting 3 s, with 3 trials in one session. Between-day measurements were performed in 2 sessions separated by a 1-week interval. Intra-rater reliability was determined using intraclass correlation coefficients (ICC). Systematic errors were assessed using Bland-Altman analysis for between-day data. [Results] ICC values for same-session data and between-day data were found to be “almost perfect”. Systematic errors not existed and only random error existed. [Conclusion] The measurement method used in this study can easily control for experimental conditions and allow precise measurement because the lack of stabilization and the impact of tester strength are removed. Thus, extensor strength in MABP measurement is beneficial for muscle strength assessment. PMID:27134388

  4. The use of hand-held 35 mm color infrared imagery for estimates of suspended solids - A progress report. [in water pollution monitoring

    NASA Technical Reports Server (NTRS)

    Miller, W. F.; Whisler, F. D.; Robinette, H. R.; Finnie, D.; Cannon, T.

    1975-01-01

    A cost-effective aerial surveillance technique is proposed for detection and identification of suspended solids which would be operational for both governmental monitoring organizations and private individuals operating catfish farms. Sixteen catfish ponds were flown daily for seven days using two hand-held 35 mm cameras with both Kodachrome X and Ektachrome infrared film. Hue, value, and chroma designations were recorded for each pond on each date by three interpreters, and the accepted color was that recorded by at least two of the interpreters, or if there was a three hue range, the median was accepted. Relations between suspended solids and color designations were analyzed graphically, and chroma was discarded due to an apparent lack of correlation. The data obtained were then analyzed by multiple regression. Significant correlations were revealed between hue and value and total and inorganic suspended solids. If perfected, this technique could be developed to sufficent accuracy for large-scale reconnaissance surveys to monitor the quality of rivers and streams.

  5. A compact and hand-held infection-screening system for use in rapid medical inspection at airport quarantine stations: system design and preliminary validation.

    PubMed

    Sun, Guanghao; Miyata, Keisuke; Matsuoka, Ayumu; Zhao, Zijun; Iwakami, Sayuri; Kim, Seokjin; Matsui, Takemi

    2015-04-01

    To conduct mass screening and thereby reduce the spread of infection, a compact (13.5 cm × 8.5 cm × 2.5 cm), highly-mobile and hand-held infection-screening system was developed for rapid medical inspection in mass gathering places such as airports. The system is capable of non-contact vital-sign monitoring using two integrated sensors: a 24-GHz microwave radar for measuring heart and respiration rates and a thermopile array for capturing facial temperature. Subsequently, the system detects infected individuals using a linear discriminant function (LDA) from the derived vital-signs data. The system was tested on 10 subjects under two conditions (resting as normal and exercising as pseudo-infected, i.e. a 10-min bicycle ergometer at 100 W exercise); the normal and pseudo-infected conditions were classified successfully via LDA for all subjects (p < 0.01; classification error rate < 5%). The proposed non-contact system can be applied for preventing secondary exposure of medical doctors at the outbreak of highly pathogenic infectious diseases such as the Ebola virus.

  6. Predicting meat quality traits of ovine m. semimembranosus, both fresh and following freezing and thawing, using a hand held Raman spectroscopic device.

    PubMed

    Fowler, Stephanie M; Schmidt, Heinar; van de Ven, Remy; Wynn, Peter; Hopkins, David L

    2015-10-01

    Complementary studies were conducted to determine the potential for a Raman spectroscopic hand held device to predict meat quality traits of fresh lamb m. semimembranosus (topside) after ageing and freezing/thawing. Spectra were collected from 80 fresh muscles at 24h and 5d PM, another 80 muscles were measured at 24h, 5d and following freezing/thawing. Shear force, cooking loss, sarcomere length, colour, particle size, collagen content, pH24, pHu, purge and thaw loss were also measured. Results indicated a potential to predict pHu (R(2)cv=0.59), pH24 (R(2)cv=0.48) and purge (R(2)cv=0.42) using spectra collected 24h PM. L* could be predicted using spectra collected 24h (R(2)cv=0.33) or 5d PM (R(2)cv=0.33). This suggests that Raman spectroscopy is suited to identifying carcases which deviate from the normal metabolic processes and related meat quality traits.

  7. Universal Hand-held Three-dimensional Optoacoustic Imaging Probe for Deep Tissue Human Angiography and Functional Preclinical Studies in Real Time

    PubMed Central

    Deán-Ben, Xosé; Fehm, Thomas Felix; Razansky, Daniel

    2014-01-01

    The exclusive combination of high optical contrast and excellent spatial resolution makes optoacoustics (photoacoustics) ideal for simultaneously attaining anatomical, functional and molecular contrast in deep optically opaque tissues. While enormous potential has been recently demonstrated in the application of optoacoustics for small animal research, vast efforts have also been undertaken in translating this imaging technology into clinical practice. We present here a newly developed optoacoustic tomography approach capable of delivering high resolution and spectrally enriched volumetric images of tissue morphology and function in real time. A detailed description of the experimental protocol for operating with the imaging system in both hand-held and stationary modes is provided and showcased for different potential scenarios involving functional and molecular studies in murine models and humans. The possibility for real time visualization in three dimensions along with the versatile handheld design of the imaging probe make the newly developed approach unique among the pantheon of imaging modalities used in today’s preclinical research and clinical practice. PMID:25408083

  8. An Approach to Precise Nitrogen Management Using Hand-Held Crop Sensor Measurements and Winter Wheat Yield Mapping in a Mediterranean Environment

    PubMed Central

    Quebrajo, Lucía; Pérez-Ruiz, Manuel; Rodriguez-Lizana, Antonio; Agüera, Juan

    2015-01-01

    Regardless of the crop production system, nutrients inputs must be controlled at or below a certain economic threshold to achieve an acceptable level of profitability. The use of management zones and variable-rate fertilizer applications is gaining popularity in precision agriculture. Many researchers have evaluated the application of final yield maps and geo-referenced geophysical measurements (e.g., apparent soil electrical conductivity-ECa) as a method of establishing relatively homogeneous management zones within the same plot. Yield estimation models based on crop conditions at certain growth stages, soil nutrient statuses, agronomic factors, moisture statuses, and weed/pest pressures are a primary goal in precision agriculture. This study attempted to achieve the following objectives: (1) to investigate the potential for predicting winter wheat yields using vegetation measurements (the Normalized Difference Vegetation Index—NDVI) at the beginning of the season, thereby allowing for a yield response to nitrogen (N) fertilizer; and (2) evaluate the feasibility of using inexpensive optical sensor measurements in a Mediterranean environment. A field experiment was conducted in two commercial wheat fields near Seville, in southwestern Spain. Yield data were collected at harvest using a yield monitoring system (RDS Ceres II-volumetric meter) installed on a combine. Wheat yield and NDVI values of 3498 ± 481 kg ha−1 and 0.67 ± 0.04 nm nm−1 (field 1) and 3221 ± 531 kg ha−1 and 0.68 ± 0.05 nm nm−1 (field 2) were obtained. In both fields, the yield and NDVI exhibited a strong Pearson correlation, with rxy = 0.64 and p < 10−4 in field 1 and rxy = 0.78 and p < 10−4 in field 2. The preliminary results indicate that hand-held crop sensor-based N management can be applied to wheat production in Spain and has the potential to increase agronomic N-use efficiency on a long-term basis. PMID:25756861

  9. Prehension synergies: A study of digit force adjustments to the continuously varied load force exerted on a partially constrained hand-held object

    PubMed Central

    Friedman, Jason; Latash, Mark L.; Zatsiorsky, Vladimir M.

    2009-01-01

    We examined how the digit forces adjust when a load force acting on a hand-held object continuously varies. The subjects were required to hold the handle still while a linearly increasing and then decreasing force was applied to the handle. The handle was constrained, such that it could only move up and down, and rotate about a horizontal axis. In addition the moment arm of the thumb tangential force was 1.5 times the moment arm of the virtual finger (VF, an imagined finger with the mechanical action equal to that of the four fingers) force. Unlike the situation when there are equal moment arms, the experimental setup forced the subjects to choose between (a) sharing equally the increase in load force between the thumb and virtual finger but generating a moment of tangential force, which had to be compensated by negatively covarying the moment due to normal forces, or (b) sharing unequally the load force increase between the thumb and VF but preventing generation of a moment of tangential forces. We found that different subjects tended to use one of these two strategies. These findings suggest that the selection by the CNS of prehension synergies at the VF-thumb level with respect to the moment of force are non-obligatory and reflect individual subject preferences. This unequal sharing of the load by the tangential forces, in contrast to the previously observed equal sharing, suggests that the invariant feature of prehension may be a correlated increase in tangential forces rather than an equal increase. PMID:19554319

  10. VALIDATION OF ANSI N42.34 AMERICAN NATIONAL STANDARD PERFORMANCE CRITERIA FOR HAND-HELD INSTRUMENTS FOR THE DETECTION AND IDENTIFICATION OF RADIONUCLIDES

    SciTech Connect

    Lorier, T.

    2014-09-03

    SRNL’s validation of ANSI N42.34-D6 for the Domestic Nuclear Detection Office (DNDO) was performed utilizing one hand-held instrument (or RID) – the FLIR identiFINDER 2. Each section of the standard was evaluated via a walk-through or test. NOTE: In Table 1, W = walk-through and T = test, as directed by the Domestic Nuclear Detection Office (DNDO). For a walk-through, the experiment was either setup or reviewed for setup; for a test, the N42.34-D6 procedures were followed with some exceptions and comments noted. SRNL is not fully able to evaluate a RID against Sections 7 (Environmental), 8 (Electromagnetic), and 9 (Mechanical) of N42.34, so those portions of this validation were done in collaboration with Qualtest, Inc. in Orlando, Florida. The walk-throughs and tests of Sections 7, 8, and 9 were performed in Qualtest, Inc. facilities with SRNL providing radiological sources as necessary. Where applicable, assessment results and findings of the walk-throughs and tests were recorded on datasheets and a validation summary is provided. A general comment pertained to test requirements found in another standard and referenced in N42.34-D6. For example, step 1 of the test method in section 8.1.2 states “RF test set up information can be found in IEC 61000-4-3.” It is recommended that any information from other standards necessary for conducting the tests within N42.34 should be posted in N42.34 for simplicity and to prevent the user from having to peruse other documents. Another general comment, as noted by Qualtest, is that a tolerance reference is not listed for each test in sections 7-9. Overall, the N42.34-D6 was proven to be practicable, but areas for improvement and recommendations were identified for consideration prior to final ballot submittal.

  11. Performance status of a small robot-mounted or hand-held, solar-blind, standoff chemical, biological, and explosives (CBE) sensor

    NASA Astrophysics Data System (ADS)

    Hug, W. F.; Reid, R. D.; Bhartia, R.; Lane, A. L.

    2009-05-01

    Photon Systems and JPL are continuing development of a new technology robot-mounted or hand-held sensor for reagentless, short-range, standoff detection and identification of trace levels CBE materials on surfaces. This deep ultraviolet CBE sensor is the result of ongoing Army STTR and DTRA programs. The evolving 6 lb, 15W, lantern-size sensor can discriminate CBE from background clutter materials using a combination of deep UV excited resonance Raman (RR) and laser induced native fluorescence (LINF) emissions resulting from excitation by a new technology deep UV laser. Standoff excitation of suspicious packages, vehicles, persons, and other objects that may contain hazardous materials is accomplished using wavelengths below 250nm where RR and LINF emissions occupy distinctly different wavelength regions. This enables simultaneous detection of RR and LINF emissions with no spectral overlap or interference of LINF over RR or RR over LINF. The new eye-safe targeted ultraviolet chemical, biological, and explosives (TUCBE) sensor can detect and identify less than 1 μg/cm2 of explosives or 104 bacterial spores at 10 meters standoff, or 10 ng/cm2 of explosives or 102 bacterial spores/cm2 at 1 meter standoff. Detection and identification requires less than 1 ms and has a sample rate up to 20 Hz. Lower concentrations of contamination can be detected and identified as closer ranges and higher concentrations at longer ranges. The sensor is solar blind and can be operated in full daylight conditions as a result of excitation and detection in the deep UV and the use of a gated detection system.

  12. Detection performance assessment of hand-held mine detection systems in a procurement process: test set-up for MDs and MD/GPRs

    NASA Astrophysics Data System (ADS)

    Schoolderman, Arnold J.; Roosenboom, Jacques H. J.

    2005-06-01

    The Engineers Centre of Expertise of the Royal Netherlands Army (RNLA) has conducted a study on countermine in peace operations. This study, finished in 2002, concluded that the final solution to countermine will depend in the first place on better detection of buried low-metal mines, e.g. by direct detection of the explosive components in mines. Until such detection systems are available, intermediate solutions are necessary in order to assure freedom of movement in peace operations. Because countermine operations consist of a number of different activities (area preparation, detection, clearance, etc) and the suitability of the different types of available equipment depends on the scenario, the toolbox concept for countermine equipment was adopted. In 2003 a procurement process was started in order to fill this toolbox with commercial-off-the-shelf and military-off-the-shelf equipment. The paper gives a concise description of the study on countermine operations and the procurement process, and subsequently focuses on the set-up of the tests that were conducted in the framework of the procurement of hand-held mine detection systems, like metal detectors and dual-sensor mine detectors. Programs of requirements for these systems were drawn up, aiming at systems for general use and special purpose systems. Blind tests to check the compliancy to the detection performance requirements were designed and conducted in the short timeframe that was available in the procurement process. These tests are discussed in this paper, including the set-up of the test lanes, the targets used and their depths, and the role of the operator. The tests of the capability of the detectors to discriminate small targets adjacent to large targets were conducted according the guidelines of the CEN Workshop Agreement on metal detector tests. Although the results of the tests are commercially confidential, conclusions and lessons learned from the execution of these tests are presented.

  13. A feasibility study to develop a diabetes prevention program for young adults with prediabetes using digital platforms and a hand held device

    PubMed Central

    Cha, EunSeok; Kim, Kevin H.; Umpierrez, Guillermo; Dawkins, Colleen R.; Bello, Morenike K.; Lerner, Hannah; Narayan, K.M. Venkat; Dunbar, Sandra B.

    2014-01-01

    Purpose The purpose of the pilot study was to examine the feasibility and preliminary efficacy of an age-specific diabetes prevention program in young adults with prediabetes. Methods One group pretest-posttest design was conducted. The inclusion criteria were young adults age 18–29 years with prediabetes [either Impaird fasting glucose [IFG] (100–125 mg/dL), or an A1C of 5.7%–6.4%]. Fifteen participants were enrolled in this study. A technology based lifestyle coaching program focused on diet and physical activity and incorporating a hand-held device and digital platforms was developed and tested. Psychosocial factors (health literacy, illness perception, self-efficacy, therapeutic efficacy) based on social cognitive theory, changes in diet and physical activity, and cardiometabolic risk factors were assessed at baseline and week 12 after intervention. A paired-samples t-test was performed to examine changes between baseline and post-intervention on each psychosocial and physical variable. Results Participants (n= 13 completers) were mean age 24.4 yrs [SD: 2.2], 23.1% male, and 53.8% were African American. Overall, the participants were satisfied with the intervention (M = 4.15 on a 5-point Likert scale). Between pre and post testing, BMI and A1C decreased from 41.0 ±7.3 to 40.1±7.0 and 6.0% ± .5 to 5.6% ± .5, respectively, while fasting glucose did not significantly change (92.6±11 mg/dl to 97.6 ±14.3 mg/dl). Conclusion The intervention resulted in reduced A1C and a trend for decreased BMI in obese sedentary young adults with prediabetes after 12 weeks of intervention. Further study through a randomized clinical trial with a longer intervention period is warranted. PMID:24950683

  14. Specific absorption rate levels measured in a phantom head exposed to radio frequency transmissions from analog hand-held mobile phones

    SciTech Connect

    Anderson, V.; Joyner, K.H.

    1995-05-01

    Electric fields (E-fields) induced within a phantom head from exposure to three different advanced mobile phone system (AMPS) hand-held telephones were measured using an implantable E-Field probe. Measurements were taken in the eye nearest the phone and along a lateral scan through the brain from its center to the side nearest the phone. During measurement, the phones were positioned alongside the phantom head as in typical use and were configured to transmit at maximum power (600 mW nominal). The specific absorption rate (SAR) was calculated from the in situ E-field measurements, which varied significantly between phone models and antenna configuration. The SARs induced in the eye ranged from 0.007 to 0.21 W/kg. Metal-framed spectacles enhanced SAR levels in the eye by 9--29%. In the brain, maximum levels were recorded at the measurement point closest to the phone and ranged from 0.12 to 0.83 W/kg. These SARs are below peak spatial limits recommended in the US and Australian national standards and the IRPA guidelines for safe exposure to radio frequency (RF) electromagnetic fields. Furthermore, a detailed thermal analysis of the eye indicated only a 0.022 C maximum steady-state temperature rise in the eye from a uniform SAR loading of 0.21 W/kg. A more approximate thermal analysis in the brain also indicated only a small maximum temperature rise of 0.034 C for a local SAR loading of 0.83 W/kg.

  15. Hand-held echocardiography in the setting of pre-operative cardiac evaluation of patients undergoing non-cardiac surgery: results from a randomized pilot study.

    PubMed

    Cavallari, Ilaria; Mega, Simona; Goffredo, Costanza; Patti, Giuseppe; Chello, Massimo; Di Sciascio, Germano

    2015-06-01

    Transthoracic echocardiography is not a routine test in the pre-operative cardiac evaluation of patients undergoing non-cardiac surgery but may be considered in those with known heart failure and valvular heart disease or complaining cardiac symptoms. In this setting, hand-held echocardiography (HHE) could find a potential application as an alternative to standard echocardiography in selected patients; however, its utility in this context has not been investigated. The aim of this pilot study was to evaluate the conclusiveness of HHE compared to standard echocardiography in this subset of patients. 100 patients scheduled for non-cardiac surgery were randomized to receive a standard exam with a Philips Ie33 or a bedside evaluation with a pocket-size imaging device (Opti-Go, Philips Medical System). The primary endpoint was the percentage of satisfactory diagnosis at the end of the examination referred as conclusiveness. Secondary endpoints were the mean duration time and the mean waiting time to perform the exams. No significant difference in terms of conclusiveness between HHE and standard echo was found (86 vs 96%; P = 0.08). Mean duration time of the examinations was 6.1 ± 1.2 min with HHE and 13.1 ± 2.6 min with standard echocardiography (P < 0.001). HHE resulted in a consistent save of waiting time because it was performed the same day of clinical evaluation whereas patients waited 10.1 ± 6.1 days for a standard echocardiography (P < 0.001). This study suggests the potential role of HHE for pre-operative evaluation of selected patients undergoing non-cardiac surgery, since it provided similar information but it was faster and earlier performed compared to standard echocardiography.

  16. An approach to precise nitrogen management using hand-held crop sensor measurements and winter wheat yield mapping in a Mediterranean environment.

    PubMed

    Quebrajo, Lucía; Pérez-Ruiz, Manuel; Rodriguez-Lizana, Antonio; Agüera, Juan

    2015-01-01

    Regardless of the crop production system, nutrients inputs must be controlled at or below a certain economic threshold to achieve an acceptable level of profitability. The use of management zones and variable-rate fertilizer applications is gaining popularity in precision agriculture. Many researchers have evaluated the application of final yield maps and geo-referenced geophysical measurements (e.g., apparent soil electrical conductivity-ECa) as a method of establishing relatively homogeneous management zones within the same plot. Yield estimation models based on crop conditions at certain growth stages, soil nutrient statuses, agronomic factors, moisture statuses, and weed/pest pressures are a primary goal in precision agriculture. This study attempted to achieve the following objectives: (1) to investigate the potential for predicting winter wheat yields using vegetation measurements (the Normalized Difference Vegetation Index-NDVI) at the beginning of the season, thereby allowing for a yield response to nitrogen (N) fertilizer; and (2) evaluate the feasibility of using inexpensive optical sensor measurements in a Mediterranean environment. A field experiment was conducted in two commercial wheat fields near Seville, in southwestern Spain. Yield data were collected at harvest using a yield monitoring system (RDS Ceres II-volumetric meter) installed on a combine. Wheat yield and NDVI values of 3498 ± 481 kg ha(-1) and 0.67 ± 0.04 nm nm(-1) (field 1) and 3221 ± 531 kg ha(-1) and 0.68 ± 0.05 nm nm(-1) (field 2) were obtained. In both fields, the yield and NDVI exhibited a strong Pearson correlation, with r(xy) = 0.64 and p < 10(-4) in field 1 and r(xy) = 0.78 and p < 10(-4) in field 2. The preliminary results indicate that hand-held crop sensor-based N management can be applied to wheat production in Spain and has the potential to increase agronomic N-use efficiency on a long-term basis. PMID:25756861

  17. Hand-held triangulation laser profilometer with audio output for blind people Profilométre laser à triangulation tenu en main avec sortie sonare pour non-voyants

    NASA Astrophysics Data System (ADS)

    Farcy, R.; Damaschini, R.

    1998-06-01

    We describe a device currently under industrial development which will give to the blind a means of three-dimensional space perception. It consists of a 350 g hand-held triangulating laser telemeter including electronic parts and batteries, with auditory feedback either inside the apparatus or close to the ear. The microprocessor unit converts in real time the distance measured by the telemeter into a musical note. Scanning the space with an adequate movement of the hand produces musical lines corresponding to the profiles of the environment. We discuss the optical configuration of the system relative to our first year of clinical experimentation.

  18. A Combination of Hand-Held Models and Computer Imaging Programs Helps Students Answer Oral Questions about Molecular Structure and Function: A Controlled Investigation of Student Learning

    ERIC Educational Resources Information Center

    Harris, Michelle A.; Peck, Ronald F.; Colton, Shannon; Morris, Jennifer; Neto, Elias Chaibub; Kallio, Julie

    2009-01-01

    We conducted a controlled investigation to examine whether a combination of computer imagery and tactile tools helps introductory cell biology laboratory undergraduate students better learn about protein structure/function relationships as compared with computer imagery alone. In all five laboratory sections, students used the molecular imaging…

  19. Feasibility, double-blind, randomised, placebo-controlled, multi-centre trial of hand-held NB-UVB phototherapy for the treatment of vitiligo at home (HI-Light trial: Home Intervention of Light therapy)

    PubMed Central

    2014-01-01

    Background Hand-held NB-UVB units are lightweight devices that may overcome the need to treat vitiligo in hospital-based phototherapy cabinets, allowing early treatment at home that may enhance the likelihood of successful repigmentation. The pilot Hi-Light trial examined the feasibility of conducting a large multi-centre randomised controlled trial (RCT) on the use of such devices by exploring recruitment, adherence, acceptability, and patient education. Methods This was a feasibility, double-blind, multi-centre, parallel group randomised placebo-controlled trial of hand-held NB-UVB phototherapy for the treatment of vitiligo at home. The overall duration of the trial was seven months; three months recruitment and four months treatment. Participants were randomly allocated to active or placebo groups (2:1 ratio). The primary outcome measure was the proportion of eligible participants who were willing to be randomised. The secondary outcomes included proportion of participants expressing interest in the trial and fulfilling eligibility criteria, withdrawal rates and missing data, proportion of participants adhering to and satisfied with the treatment, and incidence of NB-UVB short-term adverse events. Results Eighty-three percent (45/54) of vitiligo patients who expressed interest in the trial were willing to be randomised. Due to time and financial constraints, only 29/45 potential participants were booked to attend a baseline hospital visit. All 29 (100%) potential participants were confirmed as being eligible and were subsequently randomised. Willingness to participate in the study for General Practice (family physicians) surgeries and hospitals were 40% and 79%, respectively; 86% (25/29) of patients adhered to the treatment and 65% (7/11) of patients in the active group had some degree of repigmentation. Only one patient in the active group reported erythema grade 3 (3%). Both devices (Dermfix 1000 NB-UVB and Waldmann NB-UVB 109) were acceptable to participants

  20. Sensitivity and specificity of a hand-held milk electrical conductivity meter compared to the California mastitis test for mastitis in dairy cattle.

    PubMed

    Fosgate, G T; Petzer, I M; Karzis, J

    2013-04-01

    Screening tests for mastitis can play an important role in proactive mastitis control programs. The primary objective of this study was to compare the sensitivity and specificity of milk electrical conductivity (EC) to the California mastitis test (CMT) in commercial dairy cattle in South Africa using Bayesian methods without a perfect reference test. A total of 1848 quarter milk specimens were collected from 173 cows sampled during six sequential farm visits. Of these samples, 25.8% yielded pathogenic bacterial isolates. The most frequently isolated species were coagulase negative Staphylococci (n=346), Streptococcus agalactiae (n=54), and Staphylococcus aureus (n=42). The overall cow-level prevalence of mastitis was 54% based on the Bayesian latent class (BLC) analysis. The CMT was more accurate than EC for classification of cows having somatic cell counts >200,000/mL and for isolation of a bacterial pathogen. BLC analysis also suggested an overall benefit of CMT over EC but the statistical evidence was not strong (P=0.257). The Bayesian model estimated the sensitivity and specificity of EC (measured via resistance) at a cut-point of >25 mΩ/cm to be 89.9% and 86.8%, respectively. The CMT had a sensitivity and specificity of 94.5% and 77.7%, respectively, when evaluated at the weak positive cut-point. EC was useful for identifying milk specimens harbouring pathogens but was not able to differentiate among evaluated bacterial isolates. Screening tests can be used to improve udder health as part of a proactive management plan.

  1. Sensitivity and specificity of a hand-held milk electrical conductivity meter compared to the California mastitis test for mastitis in dairy cattle.

    PubMed

    Fosgate, G T; Petzer, I M; Karzis, J

    2013-04-01

    Screening tests for mastitis can play an important role in proactive mastitis control programs. The primary objective of this study was to compare the sensitivity and specificity of milk electrical conductivity (EC) to the California mastitis test (CMT) in commercial dairy cattle in South Africa using Bayesian methods without a perfect reference test. A total of 1848 quarter milk specimens were collected from 173 cows sampled during six sequential farm visits. Of these samples, 25.8% yielded pathogenic bacterial isolates. The most frequently isolated species were coagulase negative Staphylococci (n=346), Streptococcus agalactiae (n=54), and Staphylococcus aureus (n=42). The overall cow-level prevalence of mastitis was 54% based on the Bayesian latent class (BLC) analysis. The CMT was more accurate than EC for classification of cows having somatic cell counts >200,000/mL and for isolation of a bacterial pathogen. BLC analysis also suggested an overall benefit of CMT over EC but the statistical evidence was not strong (P=0.257). The Bayesian model estimated the sensitivity and specificity of EC (measured via resistance) at a cut-point of >25 mΩ/cm to be 89.9% and 86.8%, respectively. The CMT had a sensitivity and specificity of 94.5% and 77.7%, respectively, when evaluated at the weak positive cut-point. EC was useful for identifying milk specimens harbouring pathogens but was not able to differentiate among evaluated bacterial isolates. Screening tests can be used to improve udder health as part of a proactive management plan. PMID:22981736

  2. Hand-held microwave search detector

    NASA Astrophysics Data System (ADS)

    Daniels, David J.; Philippakis, Mike

    2005-05-01

    This paper describes the further development of a patented, novel, low cost, microwave search detector using noise radar technology operating in the 27-40GHz range of frequencies, initially reported in SPIE 2004. Initial experiments have shown that plastic explosives, ceramics and plastic material hidden on the body can be detected with the system. This paper considers the basic physics of the technique and reports on the development of a initial prototype system for hand search of suspects and addresses the work carried out on optimisation of PD and FAR. The radar uses a novel lens system and the design and modelling of this for optimum depth of field of focus will be reported.

  3. Using a Hand-Held Electronic Calculator

    ERIC Educational Resources Information Center

    North, Roger

    1975-01-01

    The arithmetic needed for complex calculation using an electronic calculator is explained and exemplified. Problems involving square roots, number theory, Fibonacci numbers, and electrical resistances are solved. (SD)

  4. Hand-held optical fuel pin scanner

    DOEpatents

    Kirchner, T.L.; Powers, H.G.

    1980-12-07

    An optical scanner for indicia arranged in a focal plane perpendicular to an optical system including a rotatable dove prism. The dove prism transmits a rotating image to a stationary photodiode array.

  5. Hand-held optical fuel pin scanner

    DOEpatents

    Kirchner, Tommy L.; Powers, Hurshal G.

    1987-01-01

    An optical scanner for indicia arranged in a focal plane perpendicular to an optical system including a rotatable dove prism. The dove prism transmits a rotating image to a stationary photodiode array.

  6. Cloning mice and men: prohibiting the use of iPS cells for human reproductive cloning.

    PubMed

    Lo, Bernard; Parham, Lindsay; Alvarez-Buylla, Arturo; Cedars, Marcelle; Conklin, Bruce; Fisher, Susan; Gates, Elena; Giudice, Linda; Halme, Dina Gould; Hershon, William; Kriegstein, Arnold; Kwok, Pui-Yan; Wagner, Richard

    2010-01-01

    The use of iPSCs and tetraploid complementation for human reproductive cloning would raise profound ethical objections. Professional standards and laws that ban human reproductive cloning by somatic cell nuclear transfer should be revised to also forbid it by other methods, such as iPSCs via tetraploid complementation.

  7. Hand-Held Video for Clinical Skills Teaching

    ERIC Educational Resources Information Center

    Edwards, Mark; Jones, Steve; Murphy, Fiona

    2007-01-01

    In health care education a balance needs to be struck between theoretical and practical teaching. Undergraduates typically split their time between clinical placement and university-based teaching blocks. A proportion of the time spent in preparation for clinical practice placements will be spent in the classroom or in simulation suites. The…

  8. Hand-held computer designs rod pumping installation

    SciTech Connect

    Herlihy, J.D.

    1984-10-01

    This article describes the program designed to facilitate the design of sucker rod pumping systems for conventional and Mark 2 units. For depths of 2000' or less the modified Mill's method is used, and below 2000' the design procedures of API RP llL are incorporated. The program automatically uses the appropriate design procedure depending on the fluid or pump level. The pump depth is used to calculate rod weighs and the working fluid level to calculate net lift considerations.

  9. Hand-Held Electronic Gap-Measuring Tools

    NASA Technical Reports Server (NTRS)

    Sugg, F. E.; Thompson, F. W.; Aragon, L. A.; Harrington, D. B.

    1985-01-01

    Repetitive measurements simplified by tool based on LVDT operation. With fingers in open position, Gap-measuring tool rests on digital readout instrument. With fingers inserted in gap, separation alters inductance of linear variable-differential transformer in plastic handle. Originally developed for measuring gaps between surface tiles of Space Shuttle orbiter, tool reduces measurement time from 20 minutes per tile to 2 minutes. Also reduces possibility of damage to tiles during measurement. Tool has potential applications in mass production; helps ensure proper gap dimensions in assembly of refrigerator and car doors and also used to measure dimensions of components and to verify positional accuracy of components during progressive assembly operations.

  10. Hand held sample tube manipulator, system and method

    DOEpatents

    Kenny, Donald V [Liberty Township, OH; Smith, Deborah L [Liberty Township, OH; Severance, Richard A [late of Columbus, OH

    2001-01-01

    A manipulator apparatus, system and method for measuring analytes present in sample tubes. The manipulator apparatus includes a housing having a central bore with an inlet end and outlet end; a plunger mechanism with at least a portion thereof slideably disposed for reciprocal movement within the central bore, the plunger mechanism having a tubular gas channel with an inlet end and an outlet end, the gas channel inlet end disposed in the same direction as said inlet end of the central bore, wherein the inlet end of said plunger mechanism is adapted for movement so as to expel a sample tube inserted in the bore at the outlet end of the housing, the inlet end of the plunger mechanism is adapted for connection to gas supply; a first seal is disposed in the housing for sealing between the central bore and the plunger mechanism; a second seal is disposed at the outlet end of the housing for sealing between the central bore and a sample tube; a holder mounted on the housing for holding the sample tube; and a biasing mechanism for returning the plunger mechanism to a starting position.

  11. Hand-held instrument should relieve hematoma pressure

    NASA Technical Reports Server (NTRS)

    Raggio, L. J.; Robertson, T. L.

    1967-01-01

    Portable instrument relieves hematomas beneath fingernails and toenails without surgery. This device simplifies the operative procedure with an instant variable heating tip, adjustable depth settings and interchangeable tip sizes for cauterizing small areas and relieving pressurized clots.

  12. The Hand-Held Calculator at the Intermediate Level.

    ERIC Educational Resources Information Center

    Hedren, Rolf

    1985-01-01

    Studied for three years were eight Swedish classes with pupils aged 10-12 using calculators whenever they could be of use, along with experimental textbooks. The experimental classes were as competent as control classes in mental arithmetic and calculations with simple algorithms, and had better understanding of numbers and problem solving. (MNS)

  13. Human embryo cloning prohibited in Hong Kong.

    PubMed

    Liu, Athena

    2005-12-01

    Since the birth of Dolly (the cloned sheep) in 1997, debates have arisen on the ethical and legal questions of cloning-for-biomedical-research (more commonly termed "therapeutic cloning") and of reproductive cloning using human gametes. Hong Kong enacted the Human Reproductive Technology Ordinance (Cap 561) in 2000. Section 15(1)(e) of this Ordinance prohibits the "replacing of the nucleus of a cell of an embryo with a nucleus taken from any other cell," i.e., nucleus substitution. Section 15(1)(f) prohibits the cloning of any embryo. The scope of the latter, therefore, is arguably the widest, prohibiting all cloning techniques such as cell nucleus replacement, embryo splitting, parthenogenesis, and cloning using stem cell lines. Although the Human Reproductive Technology Ordinance is not yet fully operative, this article examines how these prohibitions may adversely impact on basic research and the vision of the Hong Kong scientific community. It concludes that in light of recent scientific developments, it is time to review if the law offers a coherent set of policies in this area.

  14. Human embryo cloning prohibited in Hong Kong.

    PubMed

    Liu, Athena

    2005-12-01

    Since the birth of Dolly (the cloned sheep) in 1997, debates have arisen on the ethical and legal questions of cloning-for-biomedical-research (more commonly termed "therapeutic cloning") and of reproductive cloning using human gametes. Hong Kong enacted the Human Reproductive Technology Ordinance (Cap 561) in 2000. Section 15(1)(e) of this Ordinance prohibits the "replacing of the nucleus of a cell of an embryo with a nucleus taken from any other cell," i.e., nucleus substitution. Section 15(1)(f) prohibits the cloning of any embryo. The scope of the latter, therefore, is arguably the widest, prohibiting all cloning techniques such as cell nucleus replacement, embryo splitting, parthenogenesis, and cloning using stem cell lines. Although the Human Reproductive Technology Ordinance is not yet fully operative, this article examines how these prohibitions may adversely impact on basic research and the vision of the Hong Kong scientific community. It concludes that in light of recent scientific developments, it is time to review if the law offers a coherent set of policies in this area. PMID:16331533

  15. 50 CFR 660.405 - Prohibitions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., DEPARTMENT OF COMMERCE (CONTINUED) FISHERIES OFF WEST COAST STATES West Coast Salmon Fisheries § 660.405... unlawful for any person to do any of the following: (1) Take and retain or land salmon caught with a net in the fishery management area, except that a hand-held net may be used to bring hooked salmon on board...

  16. 50 CFR 660.405 - Prohibitions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., DEPARTMENT OF COMMERCE (CONTINUED) FISHERIES OFF WEST COAST STATES West Coast Salmon Fisheries § 660.405... unlawful for any person to do any of the following: (1) Take and retain or land salmon caught with a net in the fishery management area, except that a hand-held net may be used to bring hooked salmon on board...

  17. 50 CFR 660.405 - Prohibitions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., DEPARTMENT OF COMMERCE (CONTINUED) FISHERIES OFF WEST COAST STATES West Coast Salmon Fisheries § 660.405... unlawful for any person to do any of the following: (1) Take and retain or land salmon caught with a net in the fishery management area, except that a hand-held net may be used to bring hooked salmon on board...

  18. 50 CFR 660.405 - Prohibitions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., DEPARTMENT OF COMMERCE (CONTINUED) FISHERIES OFF WEST COAST STATES West Coast Salmon Fisheries § 660.405... unlawful for any person to do any of the following: (1) Take and retain or land salmon caught with a net in the fishery management area, except that a hand-held net may be used to bring hooked salmon on board...

  19. Prostitution, disability and prohibition.

    PubMed

    Thomsen, Frej Klem

    2015-06-01

    Criminalisation of prostitution, and minority rights for disabled persons, are important contemporary political issues. The article examines their intersection by analysing the conditions and arguments for making a legal exception for disabled persons to a general prohibition against purchasing sexual services. It explores the badness of prostitution, focusing on and discussing the argument that prostitution harms prostitutes, considers forms of regulation and the arguments for and against with emphasis on a liberty-based objection to prohibition, and finally presents and analyses three arguments for a legal exception, based on sexual rights, beneficence, and luck egalitarianism, respectively. It concludes that although the general case for and against criminalisation is complicated there is a good case for a legal exception.

  20. 33 CFR 156.310 - Prohibited areas.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Prohibited areas. 156.310 Section... the Gulf of Mexico § 156.310 Prohibited areas. Lightering operations are prohibited within the following areas in the Gulf of Mexico: (a) Claypile—prohibited area. This prohibited area consists of...

  1. 33 CFR 156.310 - Prohibited areas.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Prohibited areas. 156.310 Section... the Gulf of Mexico § 156.310 Prohibited areas. Lightering operations are prohibited within the following areas in the Gulf of Mexico: (a) Claypile—prohibited area. This prohibited area consists of...

  2. 33 CFR 156.310 - Prohibited areas.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Prohibited areas. 156.310 Section... the Gulf of Mexico § 156.310 Prohibited areas. Lightering operations are prohibited within the following areas in the Gulf of Mexico: (a) Claypile—prohibited area. This prohibited area consists of...

  3. 33 CFR 156.310 - Prohibited areas.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Prohibited areas. 156.310 Section... the Gulf of Mexico § 156.310 Prohibited areas. Lightering operations are prohibited within the following areas in the Gulf of Mexico: (a) Claypile—prohibited area. This prohibited area consists of...

  4. The Human Cloning Prohibition Act of 2001: vagueness and federalism.

    PubMed

    Swartz, Jonathan S

    2002-01-01

    On July 31, 2001, the U.S. House of Representatives passed The Human Cloning Prohibition Act of 2001. The legislation proposes a complete ban on somatic cell nuclear transfer to create cloned human embryos; it threatens transgressors with criminal punishment and civil fines. House Bill 2505 is the first human cloning prohibition to pass either chamber of Congress. This note argues that the bill is unconstitutionally vague and inconsistent with the Supreme Court's recent Commerce Clause jurisprudence.

  5. Cell-Phone Technology Threatens To Devour Distance-Education Bandwidth.

    ERIC Educational Resources Information Center

    Blumenstyk, Goldie

    2001-01-01

    Describes educators' fear that a government proposal to help accommodate new Web-surfing cell phones and other hand-held devices could end up displacing instructional-television operations. The proposal could also undermine partnerships that educational broadcasters have begun negotiating with companies to create new speedy Internet services. (EV)

  6. 50 CFR 216.17 - General prohibitions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS REGULATIONS GOVERNING THE TAKING AND IMPORTING OF MARINE MAMMALS Prohibitions § 216.17 General prohibitions. It is unlawful for any person to: (a) Assault,...

  7. 50 CFR 216.17 - General prohibitions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS REGULATIONS GOVERNING THE TAKING AND IMPORTING OF MARINE MAMMALS Prohibitions § 216.17 General prohibitions. It is unlawful for any person to: (a) Assault,...

  8. 50 CFR 216.17 - General prohibitions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS REGULATIONS GOVERNING THE TAKING AND IMPORTING OF MARINE MAMMALS Prohibitions § 216.17 General prohibitions. It is unlawful for any person to: (a) Assault,...

  9. 50 CFR 38.14 - Miscellaneous prohibitions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... (CONTINUED) THE NATIONAL WILDLIFE REFUGE SYSTEM MIDWAY ATOLL NATIONAL WILDLIFE REFUGE Prohibitions § 38.14 Miscellaneous prohibitions. No person on Midway Atoll National Wildlife Refuge will: (a) Smoke or ignite...

  10. 50 CFR 38.14 - Miscellaneous prohibitions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... (CONTINUED) THE NATIONAL WILDLIFE REFUGE SYSTEM MIDWAY ATOLL NATIONAL WILDLIFE REFUGE Prohibitions § 38.14 Miscellaneous prohibitions. No person on Midway Atoll National Wildlife Refuge will: (a) Smoke or ignite...

  11. 50 CFR 38.14 - Miscellaneous prohibitions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... (CONTINUED) THE NATIONAL WILDLIFE REFUGE SYSTEM MIDWAY ATOLL NATIONAL WILDLIFE REFUGE Prohibitions § 38.14 Miscellaneous prohibitions. No person on Midway Atoll National Wildlife Refuge will: (a) Smoke or ignite...

  12. 50 CFR 38.14 - Miscellaneous prohibitions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... (CONTINUED) THE NATIONAL WILDLIFE REFUGE SYSTEM MIDWAY ATOLL NATIONAL WILDLIFE REFUGE Prohibitions § 38.14 Miscellaneous prohibitions. No person on Midway Atoll National Wildlife Refuge will: (a) Smoke or ignite...

  13. 50 CFR 38.14 - Miscellaneous prohibitions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... (CONTINUED) THE NATIONAL WILDLIFE REFUGE SYSTEM MIDWAY ATOLL NATIONAL WILDLIFE REFUGE Prohibitions § 38.14 Miscellaneous prohibitions. No person on Midway Atoll National Wildlife Refuge will: (a) Smoke or ignite...

  14. 14 CFR 1250.103 - Discrimination prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Discrimination prohibited. 1250.103 Section 1250.103 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NONDISCRIMINATION IN... Discrimination prohibited....

  15. 14 CFR 1250.103 - Discrimination prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Discrimination prohibited. 1250.103 Section 1250.103 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NONDISCRIMINATION IN... Discrimination prohibited....

  16. 14 CFR 1250.103 - Discrimination prohibited.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Discrimination prohibited. 1250.103 Section 1250.103 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NONDISCRIMINATION IN... Discrimination prohibited....

  17. 14 CFR 1250.103 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Discrimination prohibited. 1250.103 Section 1250.103 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NONDISCRIMINATION IN... Discrimination prohibited....

  18. 19 CFR 12.60 - Importation prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... TREASURY SPECIAL CLASSES OF MERCHANDISE Fur-Seal Or Sea-Otter Skins § 12.60 Importation prohibited. The transportation, importation, sale, or possession of the skins of fur seals or sea otters is prohibited if...

  19. 19 CFR 12.60 - Importation prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... TREASURY SPECIAL CLASSES OF MERCHANDISE Fur-Seal Or Sea-Otter Skins § 12.60 Importation prohibited. The transportation, importation, sale, or possession of the skins of fur seals or sea otters is prohibited if...

  20. 50 CFR 300.176 - Prohibitions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Prohibitions. 300.176 Section 300.176 Wildlife and Fisheries INTERNATIONAL FISHING AND RELATED ACTIVITIES INTERNATIONAL FISHERIES REGULATIONS Pacific Albacore Tuna Fisheries § 300.176 Prohibitions. It is prohibited for the owner or operator of a...

  1. 28 CFR 511.12 - Prohibited objects.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Prohibited objects. 511.12 Section 511.12... GENERAL MANAGEMENT POLICY Searching and Detaining or Arresting Non-Inmates § 511.12 Prohibited objects. (a) “Prohibited objects,” as defined in 18 U.S.C. 1791(d)(1), include any objects that could jeopardize the...

  2. 45 CFR 1638.3 - Prohibition.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 4 2011-10-01 2011-10-01 false Prohibition. 1638.3 Section 1638.3 Public Welfare Regulations Relating to Public Welfare (Continued) LEGAL SERVICES CORPORATION RESTRICTION ON SOLICITATION § 1638.3 Prohibition. (a) Recipients and their employees are prohibited from representing a client as...

  3. 16 CFR 317.3 - Prohibited practices.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Prohibited practices. 317.3 Section 317.3 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS PROHIBITION OF ENERGY MARKET MANIPULATION RULE § 317.3 Prohibited practices. It shall be unlawful for any...

  4. 42 CFR 457.470 - Prohibited coverage.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 4 2012-10-01 2012-10-01 false Prohibited coverage. 457.470 Section 457.470 Public... Requirements: Coverage and Benefits § 457.470 Prohibited coverage. A State is not required to provide health benefits coverage under the plan for an item or service for which payment is prohibited under title...

  5. 42 CFR 457.470 - Prohibited coverage.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 4 2013-10-01 2013-10-01 false Prohibited coverage. 457.470 Section 457.470 Public... Requirements: Coverage and Benefits § 457.470 Prohibited coverage. A State is not required to provide health benefits coverage under the plan for an item or service for which payment is prohibited under title...

  6. 42 CFR 457.470 - Prohibited coverage.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Prohibited coverage. 457.470 Section 457.470 Public... Requirements: Coverage and Benefits § 457.470 Prohibited coverage. A State is not required to provide health benefits coverage under the plan for an item or service for which payment is prohibited under title...

  7. 16 CFR 317.3 - Prohibited practices.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Prohibited practices. 317.3 Section 317.3 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS PROHIBITION OF ENERGY MARKET MANIPULATION RULE § 317.3 Prohibited practices. It shall be unlawful for any...

  8. 50 CFR 70.4 - Prohibited acts.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Prohibited acts. 70.4 Section 70.4 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR (CONTINUED) MANAGEMENT OF FISHERIES CONSERVATION AREAS NATIONAL FISH HATCHERIES § 70.4 Prohibited acts. (a) The prohibited acts enumerated in part 27 of this...

  9. 15 CFR 8.4 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Discrimination prohibited. 8.4 Section... General Provisions; Prohibitions: Nondiscrimination Clause; Applicability to Programs § 8.4 Discrimination... discrimination under, any program to which this part applies. (b) Specific discriminatory acts prohibited. (1)...

  10. 15 CFR 8b.4 - Discrimination prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 1 2011-01-01 2011-01-01 false Discrimination prohibited. 8b.4 Section 8b.4 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Provisions § 8b.4 Discrimination prohibited. (a) General. No qualified handicapped individual shall, on...

  11. 13 CFR 113.3 - Discrimination prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Discrimination prohibited. 113.3... Provisions § 113.3 Discrimination prohibited. To the extent not covered or prohibited by part 112 of this... employment decisions shall be made in a manner which ensures that discrimination on the basis of...

  12. 45 CFR 1151.21 - Discrimination prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 3 2014-10-01 2014-10-01 false Discrimination prohibited. 1151.21 Section 1151.21... HUMANITIES NATIONAL ENDOWMENT FOR THE ARTS NONDISCRIMINATION ON THE BASIS OF HANDICAP Discrimination Prohibited Accessibility § 1151.21 Discrimination prohibited. No qualified handicapped person shall,...

  13. 15 CFR 8b.16 - Discrimination prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false Discrimination prohibited. 8b.16 Section 8b.16 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Accessibility § 8b.16 Discrimination prohibited. No qualified handicapped individual shall, because a...

  14. 15 CFR 8.4 - Discrimination prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false Discrimination prohibited. 8.4 Section... General Provisions; Prohibitions: Nondiscrimination Clause; Applicability to Programs § 8.4 Discrimination... discrimination under, any program to which this part applies. (b) Specific discriminatory acts prohibited. (1)...

  15. 45 CFR 1151.31 - Discrimination prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 3 2014-10-01 2014-10-01 false Discrimination prohibited. 1151.31 Section 1151.31... HUMANITIES NATIONAL ENDOWMENT FOR THE ARTS NONDISCRIMINATION ON THE BASIS OF HANDICAP Discrimination Prohibited Employment § 1151.31 Discrimination prohibited. (a) No qualified handicapped person shall, on...

  16. 45 CFR 1151.31 - Discrimination prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 3 2013-10-01 2013-10-01 false Discrimination prohibited. 1151.31 Section 1151.31... HUMANITIES NATIONAL ENDOWMENT FOR THE ARTS NONDISCRIMINATION ON THE BASIS OF HANDICAP Discrimination Prohibited Employment § 1151.31 Discrimination prohibited. (a) No qualified handicapped person shall, on...

  17. 45 CFR 1151.21 - Discrimination prohibited.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 45 Public Welfare 3 2012-10-01 2012-10-01 false Discrimination prohibited. 1151.21 Section 1151.21... HUMANITIES NATIONAL ENDOWMENT FOR THE ARTS NONDISCRIMINATION ON THE BASIS OF HANDICAP Discrimination Prohibited Accessibility § 1151.21 Discrimination prohibited. No qualified handicapped person shall,...

  18. 45 CFR 1151.31 - Discrimination prohibited.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 45 Public Welfare 3 2012-10-01 2012-10-01 false Discrimination prohibited. 1151.31 Section 1151.31... HUMANITIES NATIONAL ENDOWMENT FOR THE ARTS NONDISCRIMINATION ON THE BASIS OF HANDICAP Discrimination Prohibited Employment § 1151.31 Discrimination prohibited. (a) No qualified handicapped person shall, on...

  19. 45 CFR 1151.31 - Discrimination prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 3 2011-10-01 2011-10-01 false Discrimination prohibited. 1151.31 Section 1151.31... HUMANITIES NATIONAL ENDOWMENT FOR THE ARTS NONDISCRIMINATION ON THE BASIS OF HANDICAP Discrimination Prohibited Employment § 1151.31 Discrimination prohibited. (a) No qualified handicapped person shall, on...

  20. 15 CFR 8b.16 - Discrimination prohibited.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false Discrimination prohibited. 8b.16 Section 8b.16 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Accessibility § 8b.16 Discrimination prohibited. No qualified handicapped individual shall, because a...

  1. 15 CFR 8b.4 - Discrimination prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false Discrimination prohibited. 8b.4 Section 8b.4 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Provisions § 8b.4 Discrimination prohibited. (a) General. No qualified handicapped individual shall, on...

  2. 15 CFR 8b.16 - Discrimination prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false Discrimination prohibited. 8b.16 Section 8b.16 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Accessibility § 8b.16 Discrimination prohibited. No qualified handicapped individual shall, because a...

  3. 13 CFR 113.3 - Discrimination prohibited.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 13 Business Credit and Assistance 1 2012-01-01 2012-01-01 false Discrimination prohibited. 113.3... Provisions § 113.3 Discrimination prohibited. To the extent not covered or prohibited by part 112 of this... employment decisions shall be made in a manner which ensures that discrimination on the basis of...

  4. 15 CFR 8.4 - Discrimination prohibited.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false Discrimination prohibited. 8.4 Section... General Provisions; Prohibitions: Nondiscrimination Clause; Applicability to Programs § 8.4 Discrimination... discrimination under, any program to which this part applies. (b) Specific discriminatory acts prohibited. (1)...

  5. 13 CFR 113.3 - Discrimination prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 13 Business Credit and Assistance 1 2013-01-01 2013-01-01 false Discrimination prohibited. 113.3... Provisions § 113.3 Discrimination prohibited. To the extent not covered or prohibited by part 112 of this... employment decisions shall be made in a manner which ensures that discrimination on the basis of...

  6. 15 CFR 8b.4 - Discrimination prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false Discrimination prohibited. 8b.4 Section 8b.4 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Provisions § 8b.4 Discrimination prohibited. (a) General. No qualified handicapped individual shall, on...

  7. 15 CFR 8.4 - Discrimination prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 1 2011-01-01 2011-01-01 false Discrimination prohibited. 8.4 Section... General Provisions; Prohibitions: Nondiscrimination Clause; Applicability to Programs § 8.4 Discrimination... discrimination under, any program to which this part applies. (b) Specific discriminatory acts prohibited. (1)...

  8. 15 CFR 8b.11 - Discrimination prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false Discrimination prohibited. 8b.11 Section 8b.11 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Practices § 8b.11 Discrimination prohibited. (a) General. (1) No qualified handicapped individual shall,...

  9. 15 CFR 8b.4 - Discrimination prohibited.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false Discrimination prohibited. 8b.4 Section 8b.4 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Provisions § 8b.4 Discrimination prohibited. (a) General. No qualified handicapped individual shall, on...

  10. 13 CFR 113.3 - Discrimination prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 13 Business Credit and Assistance 1 2014-01-01 2014-01-01 false Discrimination prohibited. 113.3... Provisions § 113.3 Discrimination prohibited. To the extent not covered or prohibited by part 112 of this... employment decisions shall be made in a manner which ensures that discrimination on the basis of...

  11. 15 CFR 8.4 - Discrimination prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false Discrimination prohibited. 8.4 Section... General Provisions; Prohibitions: Nondiscrimination Clause; Applicability to Programs § 8.4 Discrimination... discrimination under, any program to which this part applies. (b) Specific discriminatory acts prohibited. (1)...

  12. 45 CFR 1151.21 - Discrimination prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 3 2011-10-01 2011-10-01 false Discrimination prohibited. 1151.21 Section 1151.21... HUMANITIES NATIONAL ENDOWMENT FOR THE ARTS NONDISCRIMINATION ON THE BASIS OF HANDICAP Discrimination Prohibited Accessibility § 1151.21 Discrimination prohibited. No qualified handicapped person shall,...

  13. 15 CFR 8b.11 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Discrimination prohibited. 8b.11 Section 8b.11 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Practices § 8b.11 Discrimination prohibited. (a) General. (1) No qualified handicapped individual shall,...

  14. 45 CFR 1151.21 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Discrimination prohibited. 1151.21 Section 1151.21... HUMANITIES NATIONAL ENDOWMENT FOR THE ARTS NONDISCRIMINATION ON THE BASIS OF HANDICAP Discrimination Prohibited Accessibility § 1151.21 Discrimination prohibited. No qualified handicapped person shall,...

  15. 15 CFR 8b.11 - Discrimination prohibited.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false Discrimination prohibited. 8b.11 Section 8b.11 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Practices § 8b.11 Discrimination prohibited. (a) General. (1) No qualified handicapped individual shall,...

  16. 15 CFR 8b.11 - Discrimination prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false Discrimination prohibited. 8b.11 Section 8b.11 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Practices § 8b.11 Discrimination prohibited. (a) General. (1) No qualified handicapped individual shall,...

  17. 45 CFR 1151.31 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Discrimination prohibited. 1151.31 Section 1151.31... HUMANITIES NATIONAL ENDOWMENT FOR THE ARTS NONDISCRIMINATION ON THE BASIS OF HANDICAP Discrimination Prohibited Employment § 1151.31 Discrimination prohibited. (a) No qualified handicapped person shall, on...

  18. 15 CFR 8b.16 - Discrimination prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 1 2011-01-01 2011-01-01 false Discrimination prohibited. 8b.16 Section 8b.16 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Accessibility § 8b.16 Discrimination prohibited. No qualified handicapped individual shall, because a...

  19. 45 CFR 1151.21 - Discrimination prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 3 2013-10-01 2013-10-01 false Discrimination prohibited. 1151.21 Section 1151.21... HUMANITIES NATIONAL ENDOWMENT FOR THE ARTS NONDISCRIMINATION ON THE BASIS OF HANDICAP Discrimination Prohibited Accessibility § 1151.21 Discrimination prohibited. No qualified handicapped person shall,...

  20. 15 CFR 8b.4 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Discrimination prohibited. 8b.4 Section 8b.4 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Provisions § 8b.4 Discrimination prohibited. (a) General. No qualified handicapped individual shall, on...

  1. 15 CFR 8b.11 - Discrimination prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 1 2011-01-01 2011-01-01 false Discrimination prohibited. 8b.11 Section 8b.11 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Practices § 8b.11 Discrimination prohibited. (a) General. (1) No qualified handicapped individual shall,...

  2. 15 CFR 8b.16 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Discrimination prohibited. 8b.16 Section 8b.16 Commerce and Foreign Trade Office of the Secretary of Commerce PROHIBITION OF DISCRIMINATION... Accessibility § 8b.16 Discrimination prohibited. No qualified handicapped individual shall, because a...

  3. 40 CFR 791.105 - Prohibited acts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 33 2013-07-01 2013-07-01 false Prohibited acts. 791.105 Section 791.105 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT (CONTINUED) DATA REIMBURSEMENT Prohibited Acts § 791.105 Prohibited acts. Failure to provide...

  4. 40 CFR 791.105 - Prohibited acts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 33 2012-07-01 2012-07-01 false Prohibited acts. 791.105 Section 791.105 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT (CONTINUED) DATA REIMBURSEMENT Prohibited Acts § 791.105 Prohibited acts. Failure to provide...

  5. 40 CFR 791.105 - Prohibited acts.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 31 2010-07-01 2010-07-01 true Prohibited acts. 791.105 Section 791.105 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT (CONTINUED) DATA REIMBURSEMENT Prohibited Acts § 791.105 Prohibited acts. Failure to provide...

  6. 30 CFR 57.5041 - Smoking prohibition.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Smoking prohibition. 57.5041 Section 57.5041..., Physical Agents, and Diesel Particulate Matter Radiation-Underground Only § 57.5041 Smoking prohibition. Smoking shall be prohibited in all areas of a mine where exposure records are required to be kept...

  7. 30 CFR 57.5041 - Smoking prohibition.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Smoking prohibition. 57.5041 Section 57.5041..., Physical Agents, and Diesel Particulate Matter Radiation-Underground Only § 57.5041 Smoking prohibition. Smoking shall be prohibited in all areas of a mine where exposure records are required to be kept...

  8. 30 CFR 57.5041 - Smoking prohibition.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Smoking prohibition. 57.5041 Section 57.5041..., Physical Agents, and Diesel Particulate Matter Radiation-Underground Only § 57.5041 Smoking prohibition. Smoking shall be prohibited in all areas of a mine where exposure records are required to be kept...

  9. 30 CFR 57.5041 - Smoking prohibition.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Smoking prohibition. 57.5041 Section 57.5041..., Physical Agents, and Diesel Particulate Matter Radiation-Underground Only § 57.5041 Smoking prohibition. Smoking shall be prohibited in all areas of a mine where exposure records are required to be kept...

  10. 30 CFR 57.5041 - Smoking prohibition.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Smoking prohibition. 57.5041 Section 57.5041..., Physical Agents, and Diesel Particulate Matter Radiation-Underground Only § 57.5041 Smoking prohibition. Smoking shall be prohibited in all areas of a mine where exposure records are required to be kept...

  11. 50 CFR 216.82 - Dogs prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Dogs prohibited. 216.82 Section 216.82... Pribilof Islands Administration § 216.82 Dogs prohibited. In order to prevent molestation of fur seal herds, the landing of any dogs at Pribilof Islands is prohibited....

  12. 10 CFR 503.2 - Prohibition.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... use coal or another alternate fuel as a primary energy source. ... 10 Energy 4 2014-01-01 2014-01-01 false Prohibition. 503.2 Section 503.2 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS NEW FACILITIES General Prohibition § 503.2 Prohibition. Section 201...

  13. 10 CFR 503.2 - Prohibition.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... use coal or another alternate fuel as a primary energy source. ... 10 Energy 4 2012-01-01 2012-01-01 false Prohibition. 503.2 Section 503.2 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS NEW FACILITIES General Prohibition § 503.2 Prohibition. Section 201...

  14. 10 CFR 503.2 - Prohibition.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... use coal or another alternate fuel as a primary energy source. ... 10 Energy 4 2013-01-01 2013-01-01 false Prohibition. 503.2 Section 503.2 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS NEW FACILITIES General Prohibition § 503.2 Prohibition. Section 201...

  15. 10 CFR 503.2 - Prohibition.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... use coal or another alternate fuel as a primary energy source. ... 10 Energy 4 2011-01-01 2011-01-01 false Prohibition. 503.2 Section 503.2 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS NEW FACILITIES General Prohibition § 503.2 Prohibition. Section 201...

  16. 10 CFR 503.2 - Prohibition.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... use coal or another alternate fuel as a primary energy source. ... 10 Energy 4 2010-01-01 2010-01-01 false Prohibition. 503.2 Section 503.2 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS NEW FACILITIES General Prohibition § 503.2 Prohibition. Section 201...

  17. 12 CFR 48.3 - Prohibited transactions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Prohibited transactions. 48.3 Section 48.3 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY RETAIL FOREIGN EXCHANGE TRANSACTIONS § 48.3 Prohibited transactions. (a) Fraudulent conduct prohibited. No national bank or its...

  18. 12 CFR 48.3 - Prohibited transactions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 1 2013-01-01 2013-01-01 false Prohibited transactions. 48.3 Section 48.3 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY RETAIL FOREIGN EXCHANGE TRANSACTIONS § 48.3 Prohibited transactions. (a) Fraudulent conduct prohibited. No national bank or its...

  19. 12 CFR 48.3 - Prohibited transactions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Prohibited transactions. 48.3 Section 48.3 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY RETAIL FOREIGN EXCHANGE TRANSACTIONS § 48.3 Prohibited transactions. (a) Fraudulent conduct prohibited. No national bank or its...

  20. 50 CFR 300.176 - Prohibitions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 50 Wildlife and Fisheries 11 2012-10-01 2012-10-01 false Prohibitions. 300.176 Section 300.176 Wildlife and Fisheries INTERNATIONAL FISHING AND RELATED ACTIVITIES INTERNATIONAL FISHERIES REGULATIONS Pacific Albacore Tuna Fisheries § 300.176 Prohibitions. It is prohibited for the owner or operator of a...

  1. 50 CFR 300.176 - Prohibitions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 50 Wildlife and Fisheries 11 2013-10-01 2013-10-01 false Prohibitions. 300.176 Section 300.176 Wildlife and Fisheries INTERNATIONAL FISHING AND RELATED ACTIVITIES INTERNATIONAL FISHERIES REGULATIONS Pacific Albacore Tuna Fisheries § 300.176 Prohibitions. It is prohibited for the owner or operator of a...

  2. 50 CFR 300.176 - Prohibitions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 11 2014-10-01 2014-10-01 false Prohibitions. 300.176 Section 300.176 Wildlife and Fisheries INTERNATIONAL FISHING AND RELATED ACTIVITIES INTERNATIONAL FISHERIES REGULATIONS Pacific Albacore Tuna Fisheries § 300.176 Prohibitions. It is prohibited for the owner or operator of a...

  3. 22 CFR 94.4 - Prohibitions.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Prohibitions. 94.4 Section 94.4 Foreign Relations DEPARTMENT OF STATE LEGAL AND RELATED SERVICES INTERNATIONAL CHILD ABDUCTION § 94.4 Prohibitions. (a) The U.S. Central Authority is prohibited from acting as an agent or attorney or in any...

  4. 22 CFR 94.4 - Prohibitions.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Prohibitions. 94.4 Section 94.4 Foreign Relations DEPARTMENT OF STATE LEGAL AND RELATED SERVICES INTERNATIONAL CHILD ABDUCTION § 94.4 Prohibitions. (a) The U.S. Central Authority is prohibited from acting as an agent or attorney or in any...

  5. 22 CFR 94.4 - Prohibitions.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Prohibitions. 94.4 Section 94.4 Foreign Relations DEPARTMENT OF STATE LEGAL AND RELATED SERVICES INTERNATIONAL CHILD ABDUCTION § 94.4 Prohibitions. (a) The U.S. Central Authority is prohibited from acting as an agent or attorney or in any...

  6. 22 CFR 94.4 - Prohibitions.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Prohibitions. 94.4 Section 94.4 Foreign Relations DEPARTMENT OF STATE LEGAL AND RELATED SERVICES INTERNATIONAL CHILD ABDUCTION § 94.4 Prohibitions. (a) The U.S. Central Authority is prohibited from acting as an agent or attorney or in any...

  7. 22 CFR 94.4 - Prohibitions.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Prohibitions. 94.4 Section 94.4 Foreign Relations DEPARTMENT OF STATE LEGAL AND RELATED SERVICES INTERNATIONAL CHILD ABDUCTION § 94.4 Prohibitions. (a) The U.S. Central Authority is prohibited from acting as an agent or attorney or in any...

  8. 50 CFR 622.472 - Prohibited species.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES OF THE CARIBBEAN, GULF OF MEXICO, AND SOUTH ATLANTIC Corals and...) Caribbean prohibited coral. Caribbean prohibited coral may not be fished for or possessed in or from the Caribbean EEZ. The taking of Caribbean prohibited coral in the Caribbean EEZ is not considered...

  9. 50 CFR 622.472 - Prohibited species.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES OF THE CARIBBEAN, GULF OF MEXICO, AND SOUTH ATLANTIC Corals and...) Caribbean prohibited coral. Caribbean prohibited coral may not be fished for or possessed in or from the Caribbean EEZ. The taking of Caribbean prohibited coral in the Caribbean EEZ is not considered...

  10. 45 CFR 1610.3 - Prohibition.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Regulations Relating to Public Welfare (Continued) LEGAL SERVICES CORPORATION USE OF NON-LSC FUNDS, TRANSFERS OF LSC FUNDS, PROGRAM INTEGRITY § 1610.3 Prohibition. A recipient may not use non-LSC funds for any purpose prohibited by the LSC Act or for any activity prohibited by or inconsistent with Section...

  11. 50 CFR 216.82 - Dogs prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 10 2014-10-01 2014-10-01 false Dogs prohibited. 216.82 Section 216.82... Pribilof Islands Administration § 216.82 Dogs prohibited. In order to prevent molestation of fur seal herds, the landing of any dogs at Pribilof Islands is prohibited....

  12. 50 CFR 216.82 - Dogs prohibited.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 50 Wildlife and Fisheries 10 2012-10-01 2012-10-01 false Dogs prohibited. 216.82 Section 216.82... Pribilof Islands Administration § 216.82 Dogs prohibited. In order to prevent molestation of fur seal herds, the landing of any dogs at Pribilof Islands is prohibited....

  13. 50 CFR 216.82 - Dogs prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 50 Wildlife and Fisheries 10 2013-10-01 2013-10-01 false Dogs prohibited. 216.82 Section 216.82... Pribilof Islands Administration § 216.82 Dogs prohibited. In order to prevent molestation of fur seal herds, the landing of any dogs at Pribilof Islands is prohibited....

  14. 50 CFR 216.82 - Dogs prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 9 2011-10-01 2011-10-01 false Dogs prohibited. 216.82 Section 216.82... Pribilof Islands Administration § 216.82 Dogs prohibited. In order to prevent molestation of fur seal herds, the landing of any dogs at Pribilof Islands is prohibited....

  15. 31 CFR 560.207 - Prohibited investment.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Prohibited investment. 560.207 Section... Prohibitions § 560.207 Prohibited investment. Except as otherwise authorized pursuant to this part, and... investment by a United States person in Iran or in property (including entities) owned or controlled by...

  16. 31 CFR 560.207 - Prohibited investment.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Prohibited investment. 560.207 Section... Prohibitions § 560.207 Prohibited investment. Except as otherwise authorized pursuant to this part, and... investment by a United States person in Iran or in property (including entities) owned or controlled by...

  17. 16 CFR 1205.7 - Prohibited stockpiling.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... SAFETY STANDARD FOR WALK-BEHIND POWER LAWN MOWERS The Standard § 1205.7 Prohibited stockpiling. (a... prescribed by the Consumer Product Safety Commission. (b) Prohibited acts. Stockpiling of power lawn mowers... prohibited. (c) Base period. The base period for power lawn mowers is, at the option of each manufacturer...

  18. 16 CFR 1205.7 - Prohibited stockpiling.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... SAFETY STANDARD FOR WALK-BEHIND POWER LAWN MOWERS The Standard § 1205.7 Prohibited stockpiling. (a... prescribed by the Consumer Product Safety Commission. (b) Prohibited acts. Stockpiling of power lawn mowers... prohibited. (c) Base period. The base period for power lawn mowers is, at the option of each manufacturer...

  19. Recent developments in space shuttle remote sensing, using hand-held film cameras

    NASA Technical Reports Server (NTRS)

    Amsbury, David L.; Bremer, Jeffrey M.

    1992-01-01

    The authors report on the advantages and disadvantages of a number of camera systems which are currently employed for space shuttle remote sensing operations. Systems discussed include the modified Hasselbad, the Rolleiflex 6008, the Linkof 5-inch format system, and the Nikon F3/F4 systems. Film/filter combinations (color positive films, color infrared films, color negative films and polarization filters) are presented.

  20. Development of hand-held nondestructive detection device for assessing meat freshness

    NASA Astrophysics Data System (ADS)

    Wei, Wensong; Peng, Yankun; Qiao, Lu

    2016-05-01

    Meat freshness is directly related to the health of consumers, and total volatile basic nitrogen (TVB-N) content is an important reference index for evaluating pork freshness. This paper attempted to measure TVB-N content for assessing pork meat freshness using a new self-developed portable and low cost detection device designed by ourselves basing on near infrared technique. The front-end part of this device was an integrated detection component containing a mini probe which was about 5cm in diameter circle. In the signal acquiring component, silicon photodiode detector was embedded in the center of light source in probe and spectral response range was 400-1100nm to receive diffuse light from pork meat surface in mini probe. The main circuits in this device included stabilized current supply circuit which was used to provide a stable power supply for each LED light source in probe and signal processing circuit which was utilized to complete signal amplification and A/D conversion, In addition, another vital function of the signal processing circuit was to analysis detection signals from mini probe in the detection component. For verifying this device performance, 58 pork samples with different freshness attributes and Multiple Linear Regression (MLR) mathematical method and ratio data processing algorithm were employed to build pork TVB-N content prediction model, and comparing with results from raw data model, the correlation coefficient of prediction and validation of TVB-N were 0.8027 and 0.7291 respectively, and the accuracy of predicting pork freshness was about 78.6%. This work demonstrates that it has the potential in nondestructive detection of TVB-N content in pork meat using this device, which can simplify related instruments design structure and reduce their development cost in future.

  1. Unusual pattern of injury caused by a pyrotechnic hand held signal flare.

    PubMed Central

    Oliver, D W; Ragbir, M; Saxby, P J

    1997-01-01

    The case is reported of a man shot with a distress flare from a range of about 3 m. The flare caused a large cavity deep in the pectoral muscles. There should be a high index of suspicion about the extent of the injury in all types of penetrating trauma. Images Figure 1 Figure 2 Figure 3 PMID:9248919

  2. Distributing Data to Hand-Held Devices in a Wireless Network

    NASA Technical Reports Server (NTRS)

    Hodges, Mark; Simmons, Layne

    2008-01-01

    ADROIT is a developmental computer program for real-time distribution of complex data streams for display on Web-enabled, portable terminals held by members of an operational team of a spacecraft-command-and-control center who may be located away from the center. Examples of such terminals include personal data assistants, laptop computers, and cellular telephones. ADROIT would make it unnecessary to equip each terminal with platform- specific software for access to the data streams or with software that implements the information-sharing protocol used to deliver telemetry data to clients in the center. ADROIT is a combination of middleware plus software specific to the center. (Middleware enables one application program to communicate with another by performing such functions as conversion, translation, consolidation, and/or integration.) ADROIT translates a data stream (voice, video, or alphanumerical data) from the center into Extensible Markup Language, effectuates a subscription process to determine who gets what data when, and presents the data to each user in real time. Thus, ADROIT is expected to enable distribution of operations and to reduce the cost of operations by reducing the number of persons required to be in the center.

  3. Intraoperative detection of radiolabeled compounds using a hand held gamma probe

    NASA Astrophysics Data System (ADS)

    Ricard, Marcel

    2001-02-01

    Scintillation cameras in Nuclear Medicine allow external detection of cancerous lesions after administration of a specific radiopharmaceutical to the patient. In some particular cases the affinity of the tracer is sufficient to consider the use of an intraoperative probe which enables the surgeon to identify radioactive tissues. A radiopharmaceutical consists of a radioisotope bound to a carrier molecule. The radioactive emissions must represent certain criteria in terms of half-life and energy to be detected during an operation. In the field of intraoperative detection radionuclides like 99mTc, 111In, 125I and 131I fall into this category. Their energy, which ranges from some 10 to 364 keV, cannot be properly detected by a single type of detector. Two technologies have been developed to yield detectors which are handy and sufficiently sensitive: semiconductor CdTe or CdZnTe to detect low energies and scintillator CsI(Tl) for higher energies. Today the intraoperative detection has been evaluated in the case of several pathologies such as osteoid osteoma, colorectal cancer, neuroblastoma, reoperation of differentiated thyroid carcinoma and localization of sentinel node in breast cancer and cutaneous melanoma. Obviously, the results obtained are not comparable from one indication to the other. Nevertheless, the surgeons have noted a considerable advantage in using the intraoperative probe in the case of neuroblastoma and thyroid surgery, especially when the reoperation is difficult or the localizations are ectopic or unusual. As regards the sentinel node, this concept represents a major new opportunity in the field of intraoperative detection and the results actually reported in the literature demonstrate that, when it is detected, elective node excision renders the staging of the disease more accurate. In conclusion, intraoperative detection supplies the surgeon with additional knowledge to be used in correlation with the patient's medical history.

  4. Reliability and Accuracy of Six Hand-Held Blood Lactate Analysers

    PubMed Central

    Bonaventura, Jacinta M.; Sharpe, Ken; Knight, Emma; Fuller, Kate L.; Tanner, Rebecca K.; Gore, Christopher J.

    2015-01-01

    The reliability and accuracy of five portable blood lactate (BLa) analysers (Lactate Pro, Lactate Pro2, Lactate Scout+, Xpress™, and Edge) and one handheld point-of-care analyser (i-STAT) were compared to a criterion (Radiometer ABL90). Two devices of each brand of analyser were assessed using 22 x 6 mL blood samples taken from five subjects at rest and during exercise who generated lactate ranging ~1-23 mM. Each sample was measured simultaneously ~6 times on each device. Reliability was assessed as the within-sample standard deviation (wsSD) of the six replicates; accuracy as the bias compared with the ABL90; and overall error (the root mean squared error (√MSE)) was calculated as the square root of (wsSD2 and bias2). The √MSE indicated that both the Edge and Xpress had low total error (~0-2 mM) for lactate concentrations <15 mM, whereas the Edge and Lactate Pro2 were the better of the portable analysers for concentrations >15 mM. In all cases, bias (negative) was the major contribution to the √MSE. In conclusion, in a clinical setting where BLa is generally <15 mM the Edge and Xpress devices are relevant, but for athlete testing where peak BLa is important for training prescription the Edge and Lactate Pro2 are preferred. Key points The reliability of five common portable blood lactate analysers were generally <0.5 mM for concentrations in the range of ~1.0-10 mM. For all five portable analysers, the analytical error within a brand was much smaller than the biological variation in blood lactate (BLa). Compared with a criterion blood lactate analyser, there was a tendency for all portable analysers to under-read (i.e. a negative bias), which was particularly evident at the highest concentrations (BLa ~15-23 mM). The practical application of these negative biases would overestimate the ability of the athlete and prescribe a training intensity that would be too high. PMID:25729309

  5. Using High-Resolution Hand-Held Radiometers To Measure In-Situ Thermal Resistance

    NASA Astrophysics Data System (ADS)

    Burch, Douglas M.; Krintz, Donald F.

    1984-03-01

    A field study was carried out to investigate the accuracy of using high-resolution radiometers to determine the in situ thermal resistance of building components having conventional residential construction. Two different types of radiometers were used to determine the thermal resistances of the walls of six test buildings located at the National Bureau of Standards. These radiometer thermal resistance measurements were compared to reference thermal resistance values determined from steady-state series resistance predictions, time-averaged heat-flow-sensor measurements, and guarded-hot-box measurements. When measurements were carried out 5 hours after sunset when the outdoor temperature was relatively steady and the heating plant was operated in a typical cyclic fashion, the following results were obtained: for lightweight wood-frame cavity walls, the radiometer procedures were found to distinguish wall thermal resistance 4.4 h.ft2- °F/Btu (0.77 m2•K/W) systematically higher than corresponding reference values. Such a discrimination will per-mit insulated and uninsulated walls to be distinguished. However, in the case of walls having large heat capacity (e.g., masonry and log), thermal storage effects produced large time lags between the outdoor diurnal temperature variation and the heat-flow response at the inside surface. This phenomenon caused radiometer thermal resistances to deviate substantially from corresponding reference values. This study recommends that the ANSI/ASHRAE Standard 101-1981 be modified requiring the heating plant to be operated in a typical cyclic fashion instead of being turned off prior to and during radiometer measurements.

  6. 78 FR 73415 - Safety Standard for Hand-Held Infant Carriers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-06

    ... infant carriers. 77 FR 73354. The NPR proposed to incorporate by reference the then current voluntary... incident data involving bassinets and cradles reported to the Commission as of June 8, 2012. 77 FR 73354.... 3501-3521). The preamble to the proposed rule (77 FR at 73363 through 73364) discussed the...

  7. Use of Electronic Hand-held Devices for Collection of Savannah River Site Environmental Data - 13329

    SciTech Connect

    Marberry, Hugh; Moore, Winston

    2013-07-01

    Savannah River Nuclear Solutions has begun using Xplore Tablet PC's to collect data in the field for soil samples, groundwater samples, air samples and round sheets at the Savannah River Site (SRS). EPA guidelines for groundwater sampling are incorporated into the application to ensure the sample technician follows the proper protocol. The sample technician is guided through the process for sampling and round sheet data collection by a series of menus and input boxes. Field measurements and well stabilization information are entered into the tablet for uploading into Environmental Restoration Data Management System (ERDMS). The process helps to eliminate input errors and provides data integrity. A soil sample technician has the ability to collect information about location of sample, field parameter, describe the soil sample, print bottle labels, and print chain of custody for the sample that they have collected. An air sample technician has the ability to provide flow, pressure, hours of operation, print bottle labels and chain of custody for samples they collect. Round sheets are collected using the information provided in the various procedures. The data are collected and uploaded into ERDMS. The equipment used is weather proof and hardened for the field use. Global Positioning System (GPS) capabilities are integrated into the applications to provide the location where samples were collected and to help sample technicians locate wells that are not visited often. (authors)

  8. Application of a Hand-Held Computer for Data Capture in the Operating Room

    PubMed Central

    Maruschak, Gary F.; Mack, Stephen S.; Rosenfeld, Gilbert I.; Blanck, Thomas J.J.

    1983-01-01

    In this paper, the use of a battery-powered, handheld computer system (HHC) for the capture of drug and events (D&E) during anesthesia and surgery is described. The advantages of the HHC system are small size, non-volatile memory, flexible keyboard configuration-every key can be a special function key labeled with custom overlays, fast entry of D&E with accurate time of day and provision of a pulse signal to external trend recorders logging each real-time entry. Disadvantages are limited processing speed that can inhibit complex operations such as long searches for a particular drug entry and some training is required to become a proficient user. ImagesFigure 1Figure 1

  9. 75 FR 32803 - Notice of Issuance of Final Determination Concerning a GTX Mobile+ Hand Held Computer

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-09

    ... included an additional floppy drive, CD ROM disk, and memory boards. In that case, CBP found that the... the United States), the programming of a foreign Programmable Read-Only Memory (``PROM'') chip... interconnections or stored memory, was established by programming. The court concluded that altering the...

  10. Voice Recognition Software and a Hand-Held Translation Machine for Second-Language Learning.

    ERIC Educational Resources Information Center

    Myers, Marie J.

    2000-01-01

    Presents the results of a research project subsidized by the Social Sciences and Humanities Research Council in Canada. The research constitutes one project of a number in a strategic research network "EvNet" on the evaluation of computer technologies. The focus here is on the impact of voice recognition software on the language development of…

  11. Transforming an Introductory Linear Algebra Course with a TI-92 Hand-Held Computer.

    ERIC Educational Resources Information Center

    Quesada, Antonio R.

    2003-01-01

    Describes how the introduction of the TI-92 transformed a traditional first semester linear algebra course into a matrix-oriented course that emphasized conceptual understanding, relevant applications, and numerical issues. Indicates an increase in students' overall performance as they found the calculator very useful, believed it helped them…

  12. Interference from a hand held radiofrequency remote control causing discharge of an implantable defibrillator.

    PubMed

    Man, K C; Davidson, T; Langberg, J J; Morady, F; Kalbfleisch, S J

    1993-08-01

    A 46-year-old man with a history of sustained monomorphic ventricular tachycardia underwent an implantation of a third generation multiprogrammable implantable cardioverter defibrillator. One year post implant, while manipulating a remote control to a radiofrequency modulated toy car, the patient experienced a defibrillator discharge not preceded by an arrhythmia prodrome. Subsequent interrogation of the defibrillator revealed that a 34-joule shock had been delivered and had been preceded by RR intervals ranging from 141-406 msec, consistent with sensing lead noise. The remote control utilizes a 12-volt battery and has a carrier frequency of 75.95 MHz and a modulating frequency of 50 Hz. Evaluation of the remote control and defibrillator interaction revealed that the remote control was able to trigger tachyarrhythmia sensing and reproduce the clinical episode. Interference was present only when the remote control was within 8 cm of the pulse generator and at specific angles relative to the device and only when the antenna length was > 45 cm. Interference was eliminated when a ground wire was attached to the antenna and when an aluminium shield was placed between the pulse generator and the remote control. This case report suggests that patients with third generation multiprogrammable defibrillators should be cautioned against close contact with potential sources of electromagnetic interference, such as remote control units.

  13. Hand-held, mechanically cooled, radiation detection system for gamma-ray spectroscopy

    DOEpatents

    Burks, Morgan Thomas; Eckels, Joel Del

    2010-06-08

    In one embodiment, a radiation detection system is provided including a radiation detector and a first enclosure encapsulating the radiation detector, the first enclosure including a low-emissivity infra-red (IR) reflective coating used to thermally isolate the radiation detector. Additionally, a second enclosure encapsulating the first enclosure is included, the first enclosure being suspension mounted to the second enclosure. Further, a cooler capable of cooling the radiation detector is included. Still yet, a first cooling interface positioned on the second enclosure is included for coupling the cooler and the first enclosure. Furthermore, a second cooling interface positioned on the second enclosure and capable of coupling the first enclosure to a cooler separate from the radiation detection system is included. Other embodiments are also presented.

  14. A comparison of two methods to assess the usage of mobile hand-held communication devices.

    PubMed

    Berolo, Sophia; Steenstra, Ivan; Amick, Benjamin C; Wells, Richard P

    2015-01-01

    The purposes of this study were to: 1) examine agreement between self-reported measures of mobile device use and direct measures of use, and 2) understand how respondents thought about their device use when they provided self-reports. Self-reports of six categories of device use were obtained using a previously developed questionnaire, and direct measures of use were collected using a custom logging application (n = 47). Bland-Altman analyses were used to examine agreement between the two measurement approaches. Interviews targeted participants' experiences completing the device use section of the questionnaire. Self-reports of use on a typical day last week overestimated logged use. Overestimates tended to be low at low average usage times, and became more variable as usage time increased. Self-reports of use yesterday also exceeded logged use, however the degree of overestimation was less than for a typical day last week. Six themes were identified from interviews, including the thought process used by participants to arrive at usage and the ease of reporting usage. It is challenging for respondents of this questionnaire to provide accurate self-reports of use. The source of this challenge may be attributed to the intrinsic difficulty of estimating use, partly due to the multiple functions of the devices as well as the variability of use both within a day and a week. Research investigating the relationship between device use and health outcomes should include a logging application to examine exposure simultaneously with self-reports to better understand the sources of hazardous exposures. PMID:25436479

  15. Measurement of Visual Reaction Times Using Hand-held Mobile Devices

    NASA Technical Reports Server (NTRS)

    Mulligan, Jeffrey B.; Arsintescu, Lucia; Flynn-Evans, Erin

    2015-01-01

    Modern mobile devices provide a convenient platform for collecting research data in the field. But,because the working of these devices is often cloaked behind multiple layers of proprietary system software, it can bedifficult to assess the accuracy of the data they produce, particularly in the case of timing. We have been collecting datain a simple visual reaction time experiment, as part of a fatigue testing protocol known as the Psychomotor Vigilance Test (PVT). In this protocol, subjects run a 5-minute block consisting of a sequence of trials in which a visual stimulus appears after an unpredictable variable delay. The subject is required to tap the screen as soon as possible after the appearance of the stimulus. In order to validate the reaction times reported by our program, we had subjects perform the task while a high-speed video camera recorded both the display screen, and a side view of the finger (observed in a mirror). Simple image-processing methods were applied to determine the frames in which the stimulus appeared and disappeared, and in which the finger made and broke contact with the screen. The results demonstrate a systematic delay between the initial contact by the finger and the detection of the touch by the software, having a value of 80 +- 20 milliseconds.

  16. 47 CFR 15.519 - Technical requirements for hand held UWB systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... information to an associated receiver. The UWB intentional radiator shall cease transmission within 10 seconds... received. An acknowledgment of reception must continue to be received by the UWB intentional radiator...

  17. 47 CFR 15.519 - Technical requirements for hand held UWB systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... information to an associated receiver. The UWB intentional radiator shall cease transmission within 10 seconds... received. An acknowledgment of reception must continue to be received by the UWB intentional radiator...

  18. 47 CFR 15.519 - Technical requirements for hand held UWB systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... information to an associated receiver. The UWB intentional radiator shall cease transmission within 10 seconds... received. An acknowledgment of reception must continue to be received by the UWB intentional radiator...

  19. 47 CFR 15.519 - Technical requirements for hand held UWB systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... information to an associated receiver. The UWB intentional radiator shall cease transmission within 10 seconds... received. An acknowledgment of reception must continue to be received by the UWB intentional radiator...

  20. Preoperative distraction in children: hand-held videogames vs clown therapy.

    PubMed

    Messina, M; Molinaro, F; Meucci, D; Angotti, R; Giuntini, L; Cerchia, E; Bulotta, A L; Brandigi, E

    2014-01-01

    Anxiety in children undergoing surgery is characterized by feelings of tension, apprehension, nervousness and fear which may manifest differently. Postoperative behavioural changes such as nocturnal enuresis, feeding disorders, apathy, and sleep disturbances may stem from postoperative anxiety. Some Authors pointed out that over 60% of children undergoing surgery are prone to developing behavioural alterations 2 weeks after surgery. Variables such as age, temperament and anxiety both in children and parents are considered predictors of such changes.1 Studies were published describing how psycho-behavioural interventions based on play, learning and entertainment in preparing children for surgery, may reduce preoperative anxiety. Clown-therapy is applied in the most important paediatric facilities and has proved to diminish children's emotional distress and sufferance, as well as consumption of both analgesics and sedatives and to facilitate the achievement of therapeutic goals. The aim of our study was to evaluate the efficacy of clown-therapy during the child's hospital stay, with a view to optimizing treatment and care, preventing behavioural alterations and enhancing the child's overall life quality. PMID:25669889

  1. Detection of Volatile Vapors Emitted from Explosives with a Hand-held Ion Mobility Spectrometer

    SciTech Connect

    Ewing, Robert Gordon; Miller, Carla Jean

    2001-11-01

    Vapor detection of plastic explosives is difficult because of the low vapor pressures of explosive components (i.e. RDX and PETN) present in the complex elastomeric matrix. To facilitate vapor detection of plastic explosives, detection agents (taggants) with higher vapor pressures can be added to bulk explosives during manufacture. This paper investigates the detection of two of these taggants, ethyleneglycol dinitrate (EGDN) and 2,3-dimethyl-2,3-dinitrobutane (DMNB), using a handheld ion mobility spectrometer. These two taggants were detected both from neat vapor sources as well as from bulk explosives (nitroglycerin (NG)-dynamite and C-4 tagged with DMNB). EGDN was detected from NG-dynamite as EGDN·NO3- at a reduced mobility value of 1.45 cm2 V-1 s-1 with detection limits estimated to be about 10 ppbv. DMNB was identified from tagged C-4 as both negative and positive ions with reduced mobility values of 1.33 cm2 V-1 s-1 for DMNB·NO2- and 1.44 cm2 V-1s-1 for DMNB·NH4+. Positive ions for cyclohexanone were also apparent in the spectra from tagged C-4 producing three additional peaks.

  2. Preoperative distraction in children: hand-held videogames vs clown therapy.

    PubMed

    Messina, M; Molinaro, F; Meucci, D; Angotti, R; Giuntini, L; Cerchia, E; Bulotta, A L; Brandigi, E

    2014-12-30

    Anxiety in children undergoing surgery is characterized by feelings of tension, apprehension, nervousness and fear which may manifest differently. Postoperative behavioural changes such as nocturnal enuresis, feeding disorders, apathy, and sleep disturbances may stem from postoperative anxiety. Some Authors pointed out that over 60% of children undergoing surgery are prone to developing behavioural alterations 2 weeks after surgery. Variables such as age, temperament and anxiety both in children and parents are considered predictors of such changes.1 Studies were published describing how psycho-behavioural interventions based on play, learning and entertainment in preparing children for surgery, may reduce preoperative anxiety. Clown-therapy is applied in the most important paediatric facilities and has proved to diminish children's emotional distress and sufferance, as well as consumption of both analgesics and sedatives and to facilitate the achievement of therapeutic goals. The aim of our study was to evaluate the efficacy of clown-therapy during the child's hospital stay, with a view to optimizing treatment and care, preventing behavioural alterations and enhancing the child's overall life quality.

  3. CHARACTERIZATION OF EMISSIONS FROM HAND-HELD TWO-STROKE ENGINES

    EPA Science Inventory

    Despite their extremely high organic and particulate matter emission rates, two-stroke engines remain among the least studied of engine types. Such studies are rare because they are costly to perform. Results reported in this paper were obtained using a facility that shares e...

  4. The Rosetta phone: a hand-held device for automatic translation of signs in natural images

    NASA Astrophysics Data System (ADS)

    Jafri, Syed Ali Raza; Mikkilineni, Aravind K.; Boutin, Mireille; Delp, Edward J.

    2008-02-01

    When traveling in a region where the local language is not written using the Roman alphabet, translating written text (e.g., documents, road signs, or placards) is a particularly difficult problem since the text cannot be easily entered into a translation device or searched using a dictionary. To address this problem, we are developing the "Rosetta Phone," a handheld device (e.g., PDA or mobile telephone) capable of acquiring a picture of the text, identifying the text within the image, and producing both an audible and a visual English interpretation of the text. We started with English, as a developement language, for which we achieved close to 100% accuracy in identifying and reading text. We then modified the system to be able to read and translate words written using the Arabic character set. We currently achieve approximately 95% accuracy in reading words from a small directory of town names.

  5. Use of hand-held calculator program aids analysis of subsea pipeline design

    SciTech Connect

    Tran, V.B.

    1983-02-14

    The presented SEALINE program (developed for the Hewlett Packard HP-41 calculator) simulates the behavior of the developed transport pipeline after the installation phase. It is often necessary to review the behavior of pipe during the operating phase concerning the proposed environmental condition of the proposed location. It is pointed out that analyses of pipelines designed for transportation of liquid median such as crude oil or deballast water are usually addressed with sophisticated programs for large computers.

  6. 77 FR 40637 - Honeywell International, Scanning and Mobility Division, Formerly Known as Hand Held Products...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-10

    ... in the Federal Register on June 17, 2011 (Vol. 76 FR 117). At the request of the state workforce... 17, 2011 (Vol. 76 FR 117). In order to ensure that the worker group is properly identified, the... Employment and Training Administration Honeywell International, Scanning and Mobility Division,...

  7. Hand-held forward-looking focused array mine detection with plane wave excitation

    NASA Astrophysics Data System (ADS)

    Rappaport, Carey M.; Azevedo, Stephen G.; Rosenbury, Tom; Gough, Jamie; Jin, Dongping

    2000-08-01

    A novel handheld time-domain array GPR antipersonnel mine detection system prototype has been developed. Using an offset paraboloidal reflector antenna to collimate rays form an ultra-wideband feed, the transmitted microwave impulse is concentrated forward, in front of the antenna structure. The resulting wave is a non-uniform plane wave over the portion of ground be investigated, and is incident at 45 degrees to normal. As such, much of the ground reflect wave is directed further forward, away from the operator, the reflector, and the receiving antennas, thereby reducing clutter. However, the wave transmitted into the ground, which interacts with the target, tends to have significant backscatter returning toward the receiving antennas. These receiving antennas are configured in a 2 by 2 array to provide spatial focusing in both along and cross-track directions. This is accomplished by measuring and comparing the backscattered signal at each receiver in the narrow time window between the times when the ground reflected wave passes the receiver and before this wave re-reflects from the reflector components. 2D FDTD simulation of this parabolic reflector transmitter indicates that it generates a beam with a non-uniform planar wavefront, which scatters form rough ground primarily in the forward direction. The wave transmitted into the ground is also planar, propagating at the angle of refraction, and scattering fairly isotropically from a small penetrable target. This system has been built and tested at LLNL, using a very narrow pulse shape. LLNL's Micro-Impulse Radar (MIR) and custom-built wideband antenna elements operate in the 1.5 to 5 GHz range. One particular advantage of using the MIR module is its low cost: an important feature for mine detectors used in developing countries. Preliminary measured data indicates that the surface clutter is indeed reduced relative to the target signal, and that small non-metallic anti-personnel mines can be reliably detected at burial depths as shallow as 1 inch in both dry.

  8. Humanitarian multisensor hand-held mine detector: design of a GPR array

    NASA Astrophysics Data System (ADS)

    Crisp, Graeme N.; Hill, Andrew

    2002-08-01

    At present the most effective mechanical aids for the post conflict hand clearance of anti-personnel mines are metal detectors and probes. These are effective against the majority of current mine threats but clearance rates are limited because of the high incidence of false targets in post conflict areas. Such false targets must be exposed and removed with the same care required for handling genuine ordnance. Clearance rates would be substantially improved if false targets detected by metal detectors could be distinguished from mine threats and thus left in place. One possible approach to the problem of differentiating between metal fragments and anti-personnel land mines is the use of multiple sensors. In this paper we discuss the design of a GPR for such a multi-sensor detector head. One of the challenges for combined metal detectors and GPR is the design of the GPR antenna so that it can operate effectively in the presence of metal detector coils. For a practicable device the GPR antennas must operate with the metal detector coils in their near field and coupling between sensors is of primary importance. The antennas must also be designed so that their influence on the metal detector's sensitivity is minimized. In this paper we present one solution for this problem and present experimental results showing the how the proposed GPR design operates in the presence of metal detector coils and in the presence of a resistive transducer located below the antenna array. The GPR concerned uses a 3x3 antenna array and post reception synthetic aperture processing to provide a 3d image of the ground underneath the sensor. Focussed images of various targets are presented, and images to demonstrate the effects of the other sensors on the GPR are shown.

  9. Skylab IV Hand-Held Photography: A Useful Tool for Earth Science Teaching

    ERIC Educational Resources Information Center

    Muehlberger, W. R.

    1975-01-01

    A portion of the 2,000 plus photographs taken on Skylab IV to document various features of interest are catalogued according to certain geologic, geographic, and atmospheric condition categories. Information concerning procedures for purchase are included. (CP)

  10. GOES Satellite Data Validation Via Hand-held 4 LED Sun Photometer at Norfolk State University

    NASA Technical Reports Server (NTRS)

    Reynolds, Arthur, Jr.; Jackson, Tyrone; Reynolds, Kevin; Davidson, Cassy; Coope-Pabis, Barbara

    2005-01-01

    Sun photometry is a passive means of measuring a quantity of light radiation. The GIFTS- IOMI/GLOBE Water Vapor/Haze Sun photometer contains four light emitting diodes (LEDs), which are used to convert photocurrent to voltage. The intensity of the incoming and outgoing radiation as detected on the Earth s surface can be affected by aerosols and gases in the atmosphere. The focus of this research is primarily on aerosol and water vapor particles that absorb and reemit energy. Two LEDs in the photometer correspond to light scattered at 530 nm (green spectrum) and 620 nm (red spectrum). They collect data pertaining to aerosols that scatter light. The other two LEDs detect the light scattered by water vapor at wavelengths of 820 nm and 920 nm. The water vapor measurements will be compared to data collected by the Geostationary Observation Environmental Satellite (GOES). Before a comparison can be made, the extraterrestrial constant (ET), which is intrinsic to each sun photometer, must be measured. This paper will present determination of the ET constant, from which the aerosol optical thickness (AOT) can be computed for comparison to the GOES satellite to ascertain the reliability of the sun photometer.

  11. 77 FR 73354 - Safety Standard for Hand-Held Infant Carriers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-10

    ... change, including any personal identifiers, contact information, or other personal information provided... INFORMATION CONTACT: Patricia L. Edwards, Project Manager, Directorate for Engineering Sciences, U.S. Consumer... having a seat back that is intended to be in a reclined position (more than 10 from horizontal),''...

  12. Monitoring the microcirculation at the bedside using hand-held imaging microscopes: Automatic tracking of erythrocytes.

    PubMed

    Sorelli, M; Bocchi, L; Ince, C

    2015-01-01

    In recent years, the development of portable microscopy devices that enable the noninvasive bedside evaluation of the mucosal microcirculation in critically ill patients has expanded the research on this level of the cardiovascular system. Several semi-quantitative scores have been defined to assess the peripheral perfusion, based on videos of the microcirculation. However, they are cumbersome and time-consuming processes, highlighting the need for the development of automated software techniques, to reduce physicians workload and ensure prompt and objective patient evaluation. We developed a rapid, automatic method for the quantitative assessment of erythrocyte velocities in Incident Dark Field (IDF) illumination videos of capillary flow. The technique, based on Kalman filter object tracking, was tested in 35 IDF videos against space-time diagrams, showing high correlation (r = 0.96) and agreement (bias = 3.3 μm/s) with space-time diagrams (STD), below 200 μm/s.

  13. Capillary - Discharge Based Hand-Held Detector For Chemical Vapor Monitoring

    DOEpatents

    Duan, Yixiang

    2005-05-31

    A handheld/portable detector for chemical vapor monitoring includes a housing and a discharge chamber that is established therein. The plasma discharge has a relatively small volume, e.g., in the micro-liter range. A first electrode and a second electrode are disposed within the discharge chamber and a discharge gap is established therebetween. A sample gas tube is in fluid communication with the discharge chamber and provides a sample gas to the discharge chamber. Also, a plasma gas tube is in fluid communication with the discharge chamber and provides a plasma gas thereto. Accordingly, the plasma gas can be used to maintain microplasma discharge between the electrodes and the sample gas can be introduced into the microplasma discharge. A spectrometer optically connected to the handheld/portable detector is used to measure the radiation emitted by the sample gas when subjected to the microplasma discharge.

  14. Use of hand-held computers to record and analyze intervention data.

    PubMed

    Bluml, B M; Enlow, M

    1993-07-01

    Using the Wizard to document clinical activities has been well received by the clinical staff. What had previously been a dreaded task has become an ongoing part of daily activities. The revised Clinical Activity Log also provided the staff pharmacists with an easier method of documenting their clinical activities. The task of inputing the information from the staff pharmacists' paper logs into the computer is time consuming and is currently being done by the clinical staff. Procurement of additional Wizards for the staff pharmacists to use in the central pharmacy and satellite pharmacies is currently being considered. Using the Wizard has enabled the clinical staff to document clinical activities into the computer database in an ongoing manner throughout the day. Documentation has increased and is now more complete. Productivity is being monitored. Physician responses and patient outcomes are now being documented. Most importantly the computerized system allows for easy retrieval of the documented information for evaluation so that tracking and trending can be done and we can thereby continue to improve the quality of pharmaceutical care being provided.

  15. Movement paths in operating hand-held tools: tests of distal-shift hypotheses.

    PubMed

    Sülzenbrück, Sandra; Heuer, Herbert

    2013-06-01

    Extending the body with a tool could imply that characteristics of hand movements become characteristics of the movement of the effective part of the tool. Recent research suggests that such distal shifts are subject to boundary conditions. Here we propose the existence of three constraints: a strategy constraint, a constraint of movement characteristics, and a constraint of mode of control. We investigate their validity for the curvature of transverse movements aimed at a target while using a sliding first-order lever. Participants moved the tip of the effort arm of a real or virtual lever to control a cursor representing movements of the tip of the load arm of the lever on a monitor. With this tool, straight transverse hand movements are associated with concave curvature of the path of the tip of the tool. With terminal visual feedback and when targets were presented for the hand, hand paths were slightly concave in the absence of the dynamic transformation of the tool and slightly convex in its presence. When targets were presented for the tip of the lever, both the concave and convex curvatures of the hand paths became stronger. Finally, with continuous visual feedback of the tip of the lever, curvature of hand paths became convex and concave curvature of the paths of the tip of the lever was reduced. In addition, the effect of the dynamic transformation on curvature was attenuated. These findings support the notion that distal shifts are subject to at least the three proposed constraints.

  16. Miniaturized hand held microwave interference scanning system for NDE of dielectric armor and armor systems

    SciTech Connect

    Schmidt, Karl F.; Little, Jack R.; Ellingson, William A.; Meitzler, Thomas J.; Green, William

    2011-06-23

    Inspection of ceramic-based armor has advanced through development of a microwave-based, portable, non-contact NDE system. Recently, this system was miniaturized and made wireless for maximum utility in field applications. The electronic components and functionality of the laboratory system are retained, with alternative means of position input for creation of scan images. Validation of the detection capability was recently demonstrated using specially fabricated surrogates and ballistic impact-damaged specimens. The microwave data results have been compared to data from laboratory-based microwave interferometry systems and digital x-ray imaging. The microwave interference scanning has been shown to reliably detect cracks, laminar features and material property variations. The authors present details of the system operation, descriptions of the test samples used and recent results obtained.

  17. A comparison of two methods to assess the usage of mobile hand-held communication devices.

    PubMed

    Berolo, Sophia; Steenstra, Ivan; Amick, Benjamin C; Wells, Richard P

    2015-01-01

    The purposes of this study were to: 1) examine agreement between self-reported measures of mobile device use and direct measures of use, and 2) understand how respondents thought about their device use when they provided self-reports. Self-reports of six categories of device use were obtained using a previously developed questionnaire, and direct measures of use were collected using a custom logging application (n = 47). Bland-Altman analyses were used to examine agreement between the two measurement approaches. Interviews targeted participants' experiences completing the device use section of the questionnaire. Self-reports of use on a typical day last week overestimated logged use. Overestimates tended to be low at low average usage times, and became more variable as usage time increased. Self-reports of use yesterday also exceeded logged use, however the degree of overestimation was less than for a typical day last week. Six themes were identified from interviews, including the thought process used by participants to arrive at usage and the ease of reporting usage. It is challenging for respondents of this questionnaire to provide accurate self-reports of use. The source of this challenge may be attributed to the intrinsic difficulty of estimating use, partly due to the multiple functions of the devices as well as the variability of use both within a day and a week. Research investigating the relationship between device use and health outcomes should include a logging application to examine exposure simultaneously with self-reports to better understand the sources of hazardous exposures.

  18. Ice patterns and hydrothermal plumes, Lake Baikal, Russia - Insights from Space Shuttle hand-held photography

    NASA Technical Reports Server (NTRS)

    Evans, Cynthia A.; Helfert, Michael R.; Helms, David R.

    1992-01-01

    Earth photography from the Space Shuttle is used to examine the ice cover on Lake Baikal and correlate the patterns of weakened and melting ice with known hydrothermal areas in the Siberian lake. Particular zones of melted and broken ice may be surface expressions of elevated heat flow in Lake Baikal. The possibility is explored that hydrothermal vents can introduce local convective upwelling and disrupt a stable water column to the extent that the melt zones which are observed in the lake's ice cover are produced. A heat flow map and photographs of the lake are overlaid to compare specific areas of thinned or broken ice with the hot spots. The regions of known hydrothermal activity and high heat flow correlate extremely well with circular regions of thinned ice, and zones of broken and recrystallized ice. Local and regional climate data and other sources of warm water, such as river inlets, are considered.

  19. Advanced sampling techniques for hand-held FT-IR instrumentation

    NASA Astrophysics Data System (ADS)

    Arnó, Josep; Frunzi, Michael; Weber, Chris; Levy, Dustin

    2013-05-01

    FT-IR spectroscopy is the technology of choice to identify solid and liquid phase unknown samples. The challenging ConOps in emergency response and military field applications require a significant redesign of the stationary FT-IR bench-top instruments typically used in laboratories. Specifically, field portable units require high levels of resistance against mechanical shock and chemical attack, ease of use in restrictive gear, extreme reliability, quick and easy interpretation of results, and reduced size. In the last 20 years, FT-IR instruments have been re-engineered to fit in small suitcases for field portable use and recently further miniaturized for handheld operation. This article introduces the HazMatID™ Elite, a FT-IR instrument designed to balance the portability advantages of a handheld device with the performance challenges associated with miniaturization. In this paper, special focus will be given to the HazMatID Elite's sampling interfaces optimized to collect and interrogate different types of samples: accumulated material using the on-board ATR press, dispersed powders using the ClearSampler™ tool, and the touch-to-sample sensor for direct liquid sampling. The application of the novel sample swipe accessory (ClearSampler) to collect material from surfaces will be discussed in some detail. The accessory was tested and evaluated for the detection of explosive residues before and after detonation. Experimental results derived from these investigations will be described in an effort to outline the advantages of this technology over existing sampling methods.

  20. Managing urinary incontinence through hand-held real-time decision support aid.

    PubMed

    Koutsojannis, Constantinos; Lithari, Chrysa; Hatzilygeroudis, Ioannis

    2012-07-01

    In this paper, we present an intelligent system for the diagnosis and treatment of urinary incontinence (UI) for males as well as females, called e-URIN. e-URIN is an intelligent system for diagnosis and treatment of urinary incontinence according to symptoms that are realized in one patient and usually recorded through his clinical examination as well as specific test results. The user-friendly proposed intelligent system is accommodated on a hospital server supporting e-health tools, for use through pocket PCs under wireless connection as a decision support system for resident doctors, as well as an educational tool for medical students. It is based on expert system knowledge representation provided from urology experts in combination with rich bibliographic search and study ratified with statistical results from clinical practice. Preliminary experimental results on a real patient hospital database provide acceptable performance that can be improved using more than one computational intelligence approaches in the future.

  1. 9 CFR 93.801 - Prohibitions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... CONVEYANCE AND SHIPPING CONTAINERS Elephants, Hippopotami, Rhinoceroses, and Tapirs § 93.801 Prohibitions. Elephants, hippopotami, rhinoceroses, or tapirs shall not be imported or entered into the United...

  2. 9 CFR 93.801 - Prohibitions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... CONVEYANCE AND SHIPPING CONTAINERS Elephants, Hippopotami, Rhinoceroses, and Tapirs § 93.801 Prohibitions. Elephants, hippopotami, rhinoceroses, or tapirs shall not be imported or entered into the United...

  3. 9 CFR 93.801 - Prohibitions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... CONVEYANCE AND SHIPPING CONTAINERS Elephants, Hippopotami, Rhinoceroses, and Tapirs § 93.801 Prohibitions. Elephants, hippopotami, rhinoceroses, or tapirs shall not be imported or entered into the United...

  4. 9 CFR 93.801 - Prohibitions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... CONVEYANCE AND SHIPPING CONTAINERS Elephants, Hippopotami, Rhinoceroses, and Tapirs § 93.801 Prohibitions. Elephants, hippopotami, rhinoceroses, or tapirs shall not be imported or entered into the United...

  5. 9 CFR 93.801 - Prohibitions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... CONVEYANCE AND SHIPPING CONTAINERS Elephants, Hippopotami, Rhinoceroses, and Tapirs § 93.801 Prohibitions. Elephants, hippopotami, rhinoceroses, or tapirs shall not be imported or entered into the United...

  6. 50 CFR 401.4 - Activities prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS SUBCHAPTER A ANADROMOUS FISHERIES CONSERVATION, DEVELOPMENT AND ENHANCEMENT § 401.4 Activities prohibited. Law enforcement, public relations,...

  7. 31 CFR 510.201 - Prohibited transactions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY NORTH KOREA SANCTIONS REGULATIONS Prohibitions... North Korea or a North Korean national blocked pursuant to this paragraph are referred to...

  8. 31 CFR 510.201 - Prohibited transactions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY NORTH KOREA SANCTIONS REGULATIONS Prohibitions... North Korea or a North Korean national blocked pursuant to this paragraph are referred to...

  9. 31 CFR 510.201 - Prohibited transactions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY NORTH KOREA SANCTIONS REGULATIONS Prohibitions... North Korea or a North Korean national blocked pursuant to this paragraph are referred to...

  10. 31 CFR 510.201 - Prohibited transactions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY NORTH KOREA SANCTIONS REGULATIONS Prohibitions... North Korea or a North Korean national blocked pursuant to this paragraph are referred to...

  11. 40 CFR 123.29 - Prohibition.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 22 2011-07-01 2011-07-01 false Prohibition. 123.29 Section 123.29... REQUIREMENTS State Program Submissions § 123.29 Prohibition. State permit programs shall provide that no permit shall be issued when the Regional Administrator has objected in writing under § 123.44....

  12. 50 CFR 216.12 - Prohibited importation.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS REGULATIONS GOVERNING THE TAKING AND IMPORTING OF MARINE MAMMALS Prohibitions § 216.12 Prohibited importation. (a) Except as otherwise provided in subparts C and D of this part 216, it is unlawful for any person to import any marine mammal or marine mammal...

  13. 50 CFR 216.12 - Prohibited importation.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS REGULATIONS GOVERNING THE TAKING AND IMPORTING OF MARINE MAMMALS Prohibitions § 216.12 Prohibited importation. (a) Except as otherwise provided in subparts C and D of this part 216, it is unlawful for any person to import any marine mammal or marine mammal...

  14. 15 CFR 960.13 - Prohibitions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... SERVICE LICENSING OF PRIVATE REMOTE SENSING SYSTEMS Prohibitions § 960.13 Prohibitions. It is unlawful for... subsidiary or affiliate to: (a) Operate a private remote sensing space system in such a manner as to...) Operate a private remote sensing space system without possession of a valid license issued under the...

  15. 10 CFR 4.11 - General prohibition.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... prohibition. No person in the United States shall, on the ground of sex, race, color, or national origin, be... 10 Energy 1 2010-01-01 2010-01-01 false General prohibition. 4.11 Section 4.11 Energy NUCLEAR... FINANCIAL ASSISTANCE FROM THE COMMISSION Regulations Implementing Title VI of the Civil Rights Act of...

  16. 40 CFR 7.30 - General prohibition.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... of Race, Color, National Origin or Sex § 7.30 General prohibition. No person shall be excluded from... 40 Protection of Environment 1 2010-07-01 2010-07-01 false General prohibition. 7.30 Section 7.30... receiving EPA assistance on the basis of race, color, national origin, or on the basis of sex in any...

  17. 40 CFR 93.150 - Prohibition.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... other requirements of the applicable implementation plan, the National Environmental Policy Act (NEPA... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Prohibition. 93.150 Section 93.150... Federal Actions to State or Federal Implementation Plans § 93.150 Prohibition. (a) No department,...

  18. 50 CFR 216.12 - Prohibited importation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS REGULATIONS GOVERNING THE TAKING AND IMPORTING OF MARINE MAMMALS Prohibitions § 216.12 Prohibited importation. (a) Except as otherwise provided in subparts C and D of this part 216, it is unlawful for any person to import any marine mammal or marine mammal...

  19. 50 CFR 216.12 - Prohibited importation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS REGULATIONS GOVERNING THE TAKING AND IMPORTING OF MARINE MAMMALS Prohibitions § 216.12 Prohibited importation. (a) Except as otherwise provided in subparts C and D of this part 216, it is unlawful for any person to import any marine mammal or marine mammal...

  20. 27 CFR 7.29 - Prohibited practices.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Beverages § 7.29 Prohibited practices. (a) Statements on labels. Containers of malt beverages, or any labels on such containers, or any carton, case, or individual covering of such containers, used for sale at... a distilled spirits product. This paragraph does not prohibit the following on malt beverage...

  1. 47 CFR 95.1313 - Interconnection prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... facilities of the public switched telephone network to permit the transmission of messages or signals between points in the wireline or radio network of a public telephone company and persons served by multi-use... prohibited. MURS stations are prohibited from interconnection with the public switched...

  2. 40 CFR 82.124 - Prohibitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 17 2011-07-01 2011-07-01 false Prohibitions. 82.124 Section 82.124 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE The Labeling of Products Using Ozone-Depleting Substances § 82.124 Prohibitions. (a)...

  3. 18 CFR 420.22 - Prohibition; sanctions.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Prohibition; sanctions. 420.22 Section 420.22 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL BASIN REGULATIONS-WATER SUPPLY CHARGES Water Supply Policy § 420.22 Prohibition;...

  4. 16 CFR 432.5 - Prohibited disclosures.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Prohibited disclosures. 432.5 Section 432.5 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES POWER OUTPUT CLAIMS FOR AMPLIFIERS UTILIZED IN HOME ENTERTAINMENT PRODUCTS § 432.5 Prohibited disclosures. No performance characteristics...

  5. 16 CFR 432.5 - Prohibited disclosures.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Prohibited disclosures. 432.5 Section 432.5 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES POWER OUTPUT CLAIMS FOR AMPLIFIERS UTILIZED IN HOME ENTERTAINMENT PRODUCTS § 432.5 Prohibited disclosures. No performance characteristics...

  6. 16 CFR 432.5 - Prohibited disclosures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Prohibited disclosures. 432.5 Section 432.5 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES POWER OUTPUT CLAIMS FOR AMPLIFIERS UTILIZED IN HOME ENTERTAINMENT PRODUCTS § 432.5 Prohibited disclosures. No performance characteristics...

  7. 16 CFR 432.5 - Prohibited disclosures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Prohibited disclosures. 432.5 Section 432.5 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES POWER OUTPUT CLAIMS FOR AMPLIFIERS UTILIZED IN HOME ENTERTAINMENT PRODUCTS § 432.5 Prohibited disclosures. No performance characteristics...

  8. 16 CFR 432.5 - Prohibited disclosures.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Prohibited disclosures. 432.5 Section 432.5 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES POWER OUTPUT CLAIMS FOR AMPLIFIERS UTILIZED IN HOME ENTERTAINMENT PRODUCTS § 432.5 Prohibited disclosures. No performance characteristics...

  9. 10 CFR 490.603 - Prohibited acts.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Prohibited acts. 490.603 Section 490.603 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM Investigations and Enforcement § 490.603 Prohibited acts. It is unlawful for any person to violate any provision of sections 501,...

  10. 10 CFR 490.603 - Prohibited acts.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Prohibited acts. 490.603 Section 490.603 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM Investigations and Enforcement § 490.603 Prohibited acts. It is unlawful for any person to violate any provision of sections 501,...

  11. 10 CFR 490.603 - Prohibited acts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Prohibited acts. 490.603 Section 490.603 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM Investigations and Enforcement § 490.603 Prohibited acts. It is unlawful for any person to violate any provision of sections 501,...

  12. 10 CFR 490.603 - Prohibited acts.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Prohibited acts. 490.603 Section 490.603 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM Investigations and Enforcement § 490.603 Prohibited acts. It is unlawful for any person to violate any provision of sections 501,...

  13. 10 CFR 490.603 - Prohibited acts.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Prohibited acts. 490.603 Section 490.603 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM Investigations and Enforcement § 490.603 Prohibited acts. It is unlawful for any person to violate any provision of sections 501,...

  14. 40 CFR 273.51 - Prohibitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... or treating universal waste, except by responding to releases as provided in 40 CFR 273.54. ... 40 Protection of Environment 28 2012-07-01 2012-07-01 false Prohibitions. 273.51 Section 273.51... UNIVERSAL WASTE MANAGEMENT Standards for Universal Waste Transporters § 273.51 Prohibitions. A...

  15. 50 CFR 300.176 - Prohibitions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Wildlife and Fisheries INTERNATIONAL FISHING AND RELATED ACTIVITIES INTERNATIONAL FISHERIES REGULATIONS Pacific Albacore Tuna Fisheries § 300.176 Prohibitions. It is prohibited for the owner or operator of a U.S. fishing vessel to: (a) Engage in fishing in waters under the fisheries jurisdiction of Canada...

  16. 40 CFR 279.12 - Prohibitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF USED OIL Applicability § 279.12 Prohibitions. (a) Surface impoundment prohibition. Used oil shall not be managed in surface impoundments or waste piles unless the units are subject...

  17. 40 CFR 279.12 - Prohibitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF USED OIL Applicability § 279.12 Prohibitions. (a) Surface impoundment prohibition. Used oil shall not be managed in surface impoundments or waste piles unless the units are subject...

  18. 40 CFR 279.12 - Prohibitions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF USED OIL Applicability § 279.12 Prohibitions. (a) Surface impoundment prohibition. Used oil shall not be managed in surface impoundments or waste piles unless the units are subject...

  19. 40 CFR 279.12 - Prohibitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF USED OIL Applicability § 279.12 Prohibitions. (a) Surface impoundment prohibition. Used oil shall not be managed in surface impoundments or waste piles unless the units are subject...

  20. 40 CFR 89.106 - Prohibited controls.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Prohibited controls. 89.106 Section 89...) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Emission Standards and Certification Provisions § 89.106 Prohibited controls. (a) An engine may not be equipped with an...

  1. 40 CFR 89.106 - Prohibited controls.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 21 2013-07-01 2013-07-01 false Prohibited controls. 89.106 Section 89...) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Emission Standards and Certification Provisions § 89.106 Prohibited controls. (a) An engine may not be equipped with an...

  2. 40 CFR 89.106 - Prohibited controls.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 20 2014-07-01 2013-07-01 true Prohibited controls. 89.106 Section 89...) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Emission Standards and Certification Provisions § 89.106 Prohibited controls. (a) An engine may not be equipped with an...

  3. 40 CFR 89.106 - Prohibited controls.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 21 2012-07-01 2012-07-01 false Prohibited controls. 89.106 Section 89...) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Emission Standards and Certification Provisions § 89.106 Prohibited controls. (a) An engine may not be equipped with an...

  4. 22 CFR 1414.5 - Communications prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... parte communications prohibited by § 1414.2 shall include: (a) Such communications, when written, if... accordance with the provisions of part 1429 of this chapter; and (b) Such communications, when oral, unless... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Communications prohibited. 1414.5 Section...

  5. 29 CFR 102.129 - Communications prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... prohibited by § 102.126 shall include: (a) Such communications, when written, if copies thereof are not... § 102.114(a). (b) Such communications, when oral, unless advance notice thereof is given by the... 29 Labor 2 2010-07-01 2010-07-01 false Communications prohibited. 102.129 Section 102.129...

  6. 50 CFR 600.505 - Prohibitions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Prohibitions. 600.505 Section 600.505 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Foreign Fishing § 600.505 Prohibitions. (a) It...

  7. 31 CFR 82.1 - Prohibitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Prohibitions. 82.1 Section 82.1 Money and Finance: Treasury Regulations Relating to Money and Finance 5-CENT AND ONE-CENT COIN REGULATIONS § 82.1 Prohibitions. Except as specifically authorized by the Secretary of the Treasury (or...

  8. 25 CFR 265.3 - Roads prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Roads prohibited. 265.3 Section 265.3 Indians BUREAU OF... ON INDIAN RESERVATIONS § 265.3 Roads prohibited. (a) Within the boundaries of this officially... highways, roads, truck trails, work roads, and all other types of ways constructed to make possible...

  9. 7 CFR 15b.17 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Discrimination prohibited. 15b.17 Section 15b.17... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Accessibility § 15b.17 Discrimination prohibited. No... to discrimination under any program or activity receiving assistance from this Department....

  10. 28 CFR 42.104 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Discrimination prohibited. 42.104 Section... Civil Rights Act of 1964 1 § 42.104 Discrimination prohibited. (a) General. No person in the United... denied the benefits of, or be otherwise subjected to discrimination under any program to which...

  11. 14 CFR 1251.103 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Discrimination prohibited. 1251.103 Section... OF HANDICAP General Provisions § 1251.103 Discrimination prohibited. (a) General. No qualified... of, or otherwise be subjected to discrimination under any program or activity which receives...

  12. 5 CFR 900.404 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Discrimination prohibited. 900.404... § 900.404 Discrimination prohibited. (a) General. A person in the United States shall not, on the ground... be otherwise subjected to discrimination under, a program to which this subpart applies. (b)...

  13. 24 CFR 232.625 - Discrimination prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 2 2013-04-01 2013-04-01 false Discrimination prohibited. 232.625... Fire Safety Equipment Special Requirements § 232.625 Discrimination prohibited. Any contract or... provide that there shall be no discrimination against any employee or applicant for employment because...

  14. 10 CFR 1040.71 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Discrimination prohibited. 1040.71 Section 1040.71 Energy... § 1040.71 Discrimination prohibited. No handicapped person shall, because a recipient's facilities are... in, or be subjected to discrimination under any program or activity that receives or benefits...

  15. 34 CFR 100.3 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Discrimination prohibited. 100.3 Section 100.3... EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 § 100.3 Discrimination prohibited. (a) General. No... participation in, be denied the benefits of, or be otherwise subjected to discrimination under any program...

  16. 34 CFR 100.3 - Discrimination prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 1 2011-07-01 2011-07-01 false Discrimination prohibited. 100.3 Section 100.3... EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 § 100.3 Discrimination prohibited. (a) General. No... participation in, be denied the benefits of, or be otherwise subjected to discrimination under any program...

  17. 28 CFR 42.520 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Discrimination prohibited. 42.520 Section...-Implementation of Section 504 of the Rehabilitation Act of 1973 Accessibility § 42.520 Discrimination prohibited... participation in, or otherwise subjected to discrimination under any program or activity receiving...

  18. 49 CFR 374.101 - Discrimination prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 5 2013-10-01 2013-10-01 false Discrimination prohibited. 374.101 Section 374.101... REGULATIONS Discrimination in Operations of Interstate Motor Common Carriers of Passengers § 374.101 Discrimination prohibited. No motor common carrier of passengers subject to 49 U.S.C. subtitle IV, part B...

  19. 45 CFR 611.3 - Discrimination prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 3 2011-10-01 2011-10-01 false Discrimination prohibited. 611.3 Section 611.3... CIVIL RIGHTS ACT OF 1964 § 611.3 Discrimination prohibited. (a) General. No person in the United States... benefits of, or be otherwise subjected to discrimination under any program to which this part applies....

  20. 22 CFR 141.3 - Discrimination prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Discrimination prohibited. 141.3 Section 141.3... DEPARTMENT OF STATE-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 § 141.3 Discrimination... discrimination under any program to which this part applies. (b) Specific discriminatory actions prohibited....

  1. 24 CFR 1.4 - Discrimination prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Discrimination prohibited. 1.4... DEVELOPMENT-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 § 1.4 Discrimination prohibited. (a... excluded from participation in, be denied the benefits of, or be otherwise subjected to...

  2. 34 CFR 104.21 - Discrimination prohibited.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 1 2012-07-01 2012-07-01 false Discrimination prohibited. 104.21 Section 104.21... ASSISTANCE Accessibility § 104.21 Discrimination prohibited. No qualified handicapped person shall, because a... excluded from participation in, or otherwise be subjected to discrimination under any program or...

  3. 7 CFR 15b.12 - Discrimination prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 1 2014-01-01 2014-01-01 false Discrimination prohibited. 15b.12 Section 15b.12... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Employment Practices § 15b.12 Discrimination prohibited. (a... discrimination in employment under any program or activity receiving assistance from this Department. (2)...

  4. 7 CFR 15b.4 - Discrimination prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 1 2014-01-01 2014-01-01 false Discrimination prohibited. 15b.4 Section 15b.4... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE General Provisions § 15b.4 Discrimination prohibited. (a... in, be denied the benefits of, or otherwise be subjected to discrimination under any program...

  5. 45 CFR 605.11 - Discrimination prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 3 2013-10-01 2013-10-01 false Discrimination prohibited. 605.11 Section 605.11... Employment Practices § 605.11 Discrimination prohibited. (a) General. (1) No qualified handicapped person shall, on the basis of handicap, be subjected to discrimination in employment under any program...

  6. 34 CFR 104.11 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Discrimination prohibited. 104.11 Section 104.11... ASSISTANCE Employment Practices § 104.11 Discrimination prohibited. (a) General. (1) No qualified handicapped person shall, on the basis of handicap, be subjected to discrimination in employment under any program...

  7. 10 CFR 1040.71 - Discrimination prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Discrimination prohibited. 1040.71 Section 1040.71 Energy... § 1040.71 Discrimination prohibited. No handicapped person shall, because a recipient's facilities are... in, or be subjected to discrimination under any program or activity that receives or benefits...

  8. 24 CFR 6.4 - Discrimination prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... at 24 CFR part 8 apply to discrimination on the basis of disability; and the regulations at 24 CFR... Recipient shall not be prohibited by this section from taking any action eligible under subpart C of 24 CFR... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Discrimination prohibited....

  9. 50 CFR 3.1 - Discrimination prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 1 2014-10-01 2014-10-01 false Discrimination prohibited. 3.1 Section 3.1... PROVISIONS NONDISCRIMINATION-CONTRACTS, PERMITS, AND USE OF FACILITIES § 3.1 Discrimination prohibited. No..., be denied the benefits of, or be otherwise subjected to any form of discrimination or...

  10. 45 CFR 84.4 - Discrimination prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 1 2014-10-01 2014-10-01 false Discrimination prohibited. 84.4 Section 84.4... § 84.4 Discrimination prohibited. (a) General. No qualified handicapped person shall, on the basis of... discrimination under any program or activity which receives Federal financial assistance. (b)...

  11. 10 CFR 1040.63 - Discrimination prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Discrimination prohibited. 1040.63 Section 1040.63 Energy... Provisions § 1040.63 Discrimination prohibited. (a) General. No qualified handicapped person shall, on the... subjected to discrimination under any program or activity that receives Federal financial assistance...

  12. 24 CFR 232.625 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Discrimination prohibited. 232.625... Fire Safety Equipment Special Requirements § 232.625 Discrimination prohibited. Any contract or... provide that there shall be no discrimination against any employee or applicant for employment because...

  13. 34 CFR 104.21 - Discrimination prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 1 2013-07-01 2013-07-01 false Discrimination prohibited. 104.21 Section 104.21... ASSISTANCE Accessibility § 104.21 Discrimination prohibited. No qualified handicapped person shall, because a... excluded from participation in, or otherwise be subjected to discrimination under any program or...

  14. 45 CFR 1170.21 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Discrimination prohibited. 1170.21 Section 1170.21... ASSISTED PROGRAMS OR ACTIVITIES Employment Practices § 1170.21 Discrimination prohibited. (a) General. No qualified handicapped person shall, on the basis of handicap, be subjected to discrimination in...

  15. 24 CFR 1.4 - Discrimination prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Discrimination prohibited. 1.4... DEVELOPMENT-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 § 1.4 Discrimination prohibited. (a... excluded from participation in, be denied the benefits of, or be otherwise subjected to...

  16. 34 CFR 104.21 - Discrimination prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 1 2011-07-01 2011-07-01 false Discrimination prohibited. 104.21 Section 104.21... ASSISTANCE Accessibility § 104.21 Discrimination prohibited. No qualified handicapped person shall, because a... excluded from participation in, or otherwise be subjected to discrimination under any program or...

  17. 29 CFR 32.26 - Discrimination prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 1 2011-07-01 2011-07-01 false Discrimination prohibited. 32.26 Section 32.26 Labor Office... RECEIVING FEDERAL FINANCIAL ASSISTANCE Accessibility § 32.26 Discrimination prohibited. No qualified... discrimination under any program or activity to which this part applies....

  18. 45 CFR 1170.21 - Discrimination prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 3 2011-10-01 2011-10-01 false Discrimination prohibited. 1170.21 Section 1170.21... ASSISTED PROGRAMS OR ACTIVITIES Employment Practices § 1170.21 Discrimination prohibited. (a) General. No qualified handicapped person shall, on the basis of handicap, be subjected to discrimination in...

  19. 29 CFR 34.3 - Discrimination prohibited.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 1 2012-07-01 2012-07-01 false Discrimination prohibited. 34.3 Section 34.3 Labor Office... Discrimination prohibited. No individual in the United States shall, on the ground of race, color, religion, sex... discrimination under, or denied employment in the administration of or in connection with any JTPA-funded...

  20. 28 CFR 42.520 - Discrimination prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 28 Judicial Administration 1 2013-07-01 2013-07-01 false Discrimination prohibited. 42.520 Section...-Implementation of Section 504 of the Rehabilitation Act of 1973 Accessibility § 42.520 Discrimination prohibited... participation in, or otherwise subjected to discrimination under any program or activity receiving...