Integrating Model-Based Verification into Software Design Education

ERIC Educational Resources Information Center

Yilmaz, Levent; Wang, Shuo

2005-01-01

Proper design analysis is indispensable to assure quality and reduce emergent costs due to faulty software. Teaching proper design verification skills early during pedagogical development is crucial, as such analysis is the only tractable way of resolving software problems early when they are easy to fix. The premise of the presented strategy is…

A quantitative analysis of statistical power identifies obesity end points for improved in vivo preclinical study design.

PubMed

Selimkhanov, J; Thompson, W C; Guo, J; Hall, K D; Musante, C J

2017-08-01

The design of well-powered in vivo preclinical studies is a key element in building the knowledge of disease physiology for the purpose of identifying and effectively testing potential antiobesity drug targets. However, as a result of the complexity of the obese phenotype, there is limited understanding of the variability within and between study animals of macroscopic end points such as food intake and body composition. This, combined with limitations inherent in the measurement of certain end points, presents challenges to study design that can have significant consequences for an antiobesity program. Here, we analyze a large, longitudinal study of mouse food intake and body composition during diet perturbation to quantify the variability and interaction of the key metabolic end points. To demonstrate how conclusions can change as a function of study size, we show that a simulated preclinical study properly powered for one end point may lead to false conclusions based on secondary end points. We then propose the guidelines for end point selection and study size estimation under different conditions to facilitate proper power calculation for a more successful in vivo study design.

Investigation of asphalt content design for open-graded bituminous mixes.

DOT National Transportation Integrated Search

1974-01-01

Several design procedures associated with determining the proper asphalt content for open-graded bituminous mixes were investigated. Also considered was the proper amount of tack coat that should be placed on the old surface prior to paving operation...

Feasibility study of an Integrated Program for Aerospace-vehicle Design (IPAD) system. Volume 3: Engineering creative/evaluation processes, phase 1, task 2

NASA Technical Reports Server (NTRS)

Garrocq, C. A.; Hosek, J. J.

1973-01-01

A series of functional flow charts are considered that were developed to properly identify and record the degree of participation of the disciplines considered in this feasibility study and the type of data required in the design process.

Review & Peer Review of “Parameters for Properly Designed and Operated Flares” Documents

EPA Pesticide Factsheets

This page contains two 2012 memoranda on the review of EPA's parameters for properly designed and operated flares. One details the process of peer review, and the other provides background information and specific charge questions to the panel.

29 CFR 1607.1 - Statement of purpose.

Code of Federal Regulations, 2014 CFR

2014-07-01

... incorporate a single set of principles which are designed to assist employers, labor organizations, employment... are designed to provide a framework for determining the proper use of tests and other selection procedures. These guidelines do not require a user to conduct validity studies of selection procedures where...

29 CFR 1607.1 - Statement of purpose.

Code of Federal Regulations, 2011 CFR

2011-07-01

... incorporate a single set of principles which are designed to assist employers, labor organizations, employment... are designed to provide a framework for determining the proper use of tests and other selection procedures. These guidelines do not require a user to conduct validity studies of selection procedures where...

29 CFR 1607.1 - Statement of purpose.

Code of Federal Regulations, 2012 CFR

2012-07-01

... incorporate a single set of principles which are designed to assist employers, labor organizations, employment... are designed to provide a framework for determining the proper use of tests and other selection procedures. These guidelines do not require a user to conduct validity studies of selection procedures where...

29 CFR 1607.1 - Statement of purpose.

Code of Federal Regulations, 2013 CFR

2013-07-01

... incorporate a single set of principles which are designed to assist employers, labor organizations, employment... are designed to provide a framework for determining the proper use of tests and other selection procedures. These guidelines do not require a user to conduct validity studies of selection procedures where...

29 CFR 1607.1 - Statement of purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... incorporate a single set of principles which are designed to assist employers, labor organizations, employment... are designed to provide a framework for determining the proper use of tests and other selection procedures. These guidelines do not require a user to conduct validity studies of selection procedures where...

Design, parametrization, and pole placement of stabilizing output feedback compensators via injective cogenerator quotient signal modules.

PubMed

Blumthaler, Ingrid; Oberst, Ulrich

2012-03-01

Control design belongs to the most important and difficult tasks of control engineering and has therefore been treated by many prominent researchers and in many textbooks, the systems being generally described by their transfer matrices or by Rosenbrock equations and more recently also as behaviors. Our approach to controller design uses, in addition to the ideas of our predecessors on coprime factorizations of transfer matrices and on the parametrization of stabilizing compensators, a new mathematical technique which enables simpler design and also new theorems in spite of the many outstanding results of the literature: (1) We use an injective cogenerator signal module ℱ over the polynomial algebra [Formula: see text] (F an infinite field), a saturated multiplicatively closed set T of stable polynomials and its quotient ring [Formula: see text] of stable rational functions. This enables the simultaneous treatment of continuous and discrete systems and of all notions of stability, called T-stability. We investigate stabilizing control design by output feedback of input/output (IO) behaviors and study the full feedback IO behavior, especially its autonomous part and not only its transfer matrix. (2) The new technique is characterized by the permanent application of the injective cogenerator quotient signal module [Formula: see text] and of quotient behaviors [Formula: see text] of [Formula: see text]-behaviors B. (3) For the control tasks of tracking, disturbance rejection, model matching, and decoupling and not necessarily proper plants we derive necessary and sufficient conditions for the existence of proper stabilizing compensators with proper and stable closed loop behaviors, parametrize all such compensators as IO behaviors and not only their transfer matrices and give new algorithms for their construction. Moreover we solve the problem of pole placement or spectral assignability for the complete feedback behavior. The properness of the full feedback behavior ensures the absence of impulsive solutions in the continuous case, and that of the compensator enables its realization by Kalman state space equations or elementary building blocks. We note that every behavior admits an IO decomposition with proper transfer matrix, but that most of these decompositions do not have this property, and therefore we do not assume the properness of the plant. (4) The new technique can also be applied to more general control interconnections according to Willems, in particular to two-parameter feedback compensators and to the recent tracking framework of Fiaz/Takaba/Trentelman. In contrast to these authors, however, we pay special attention to the properness of all constructed transfer matrices which requires more subtle algorithms.

Antitumor Efficacy Testing in Rodents

PubMed Central

2008-01-01

The preclinical research and human clinical trials necessary for developing anticancer therapeutics are costly. One contributor to these costs is preclinical rodent efficacy studies, which, in addition to the costs associated with conducting them, often guide the selection of agents for clinical development. If inappropriate or inaccurate recommendations are made on the basis of these preclinical studies, then additional costs are incurred. In this commentary, I discuss the issues associated with preclinical rodent efficacy studies. These include the identification of proper preclinical efficacy models, the selection of appropriate experimental endpoints, and the correct statistical evaluation of the resulting data. I also describe important experimental design considerations, such as selecting the drug vehicle, optimizing the therapeutic treatment plan, properly powering the experiment by defining appropriate numbers of replicates in each treatment arm, and proper randomization. Improved preclinical selection criteria can aid in reducing unnecessary human studies, thus reducing the overall costs of anticancer drug development. PMID:18957675

Generalized linear models and point count data: statistical considerations for the design and analysis of monitoring studies

Treesearch

Nathaniel E. Seavy; Suhel Quader; John D. Alexander; C. John Ralph

2005-01-01

The success of avian monitoring programs to effectively guide management decisions requires that studies be efficiently designed and data be properly analyzed. A complicating factor is that point count surveys often generate data with non-normal distributional properties. In this paper we review methods of dealing with deviations from normal assumptions, and we focus...

A Polarized High-Energy Photon Beam for Production of Exotic Mesons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Senderovich, Igor

2012-01-01

This work describes design, prototyping and testing of various components of the Jefferson Lab Hall D photon beamline. These include coherent bremsstrahlung radiators to be used in this facility for generating the photon beam, a fine resolution hodoscope for the facility's tagging spectrometer, and a photon beam position sensor for stabilizing the beam on a collimator. The principal instrumentation project was the hodoscope: its design, implementation and beam testing will be thoroughly described. Studies of the coherent bremsstrahlung radiators involved X-ray characterization of diamond crystals to identify the appropriate line of manufactured radiators and the proper techniques for thinning themmore » to the desired specification of the beamline. The photon beam position sensor project involved completion of a designed detector and its beam test. The results of these shorter studies will also be presented. The second part of this work discusses a Monte Carlo study of a possible photo-production and decay channel in the GlueX experiment that will be housed in the Hall D facility. Specifically, the γ p → Xp → b 1 π → ω π +1 π -1 channel was studied including its Amplitude Analysis. This exercise attempted to generate a possible physics signal, complete with internal angular momentum states, and be able to reconstruct the signal in the detector and find the proper set of JPC quantum numbers through an amplitude fit. Derivation of the proper set of amplitudes in the helicity basis is described, followed by a discussion of the implementation, generation of the data sets, reconstruction techniques, the amplitude fit and results of this study.« less

[Study on optimization of formulation of Danggui Liuhuang effervescent granules].

PubMed

Zheng, Ping; Meng, Li-Juan; Sun, Guo-Ping; Wang, Wen-Zhong

2011-03-01

To optimize the formulation of Danggui Liuhuang effervescent granules. By means of quadratic regression rotation-orthogonal combination design, the effect of the proper proportion between citric acid and sodium bicarbonate, as well as the proper quantity of polyethylene glycol 6000 and sodium cyclamate on the dissolubility and pH of effervescent granules was studied. The best formulation was as follows: citric acid: sodium bicarbonate = 0.75: 1, the percentage of polyethylene glycol 6000 and cyclamate was 3.25% and 0.89%, respectively. The dissolubility and pH of the effervescent granules are better and the taste is satisfactory.

Models in the Design and Validation of Eddy Current Inspection for Cracking in the Shuttle Reaction Control System Thruster

NASA Technical Reports Server (NTRS)

Aldrin, John C.; Williams, Phillip A.; Wincheski, Russell (Buzz) A.

2008-01-01

A case study is presented for using models in eddy current NDE design for crack detection in Shuttle Reaction Control System thruster components. Numerical methods were used to address the complex geometry of the part and perform parametric studies of potential transducer designs. Simulations were found to show agreement with experimental results. Accurate representation of the coherent noise associated with the measurement and part geometry was found to be critical to properly evaluate the best probe designs.

A Study of the Generalizability of Teacher Change Quasi-Experiments

ERIC Educational Resources Information Center

Stringfield, Samuel; Schaffer, Eugene; Devlin-Scherer, Roberta

2017-01-01

Quasi-experimental teacher effectiveness studies have indicated that properly designed staff development programs can lead to changes in teacher and student behavior and to gains in student achievement. Those studies involved workshop series led by nationally known scholars. Using instructors from varied backgrounds, the current study examined the…

System dynamics and simulation of LSS

NASA Technical Reports Server (NTRS)

Ryan, R. F.

1978-01-01

Large Space Structures have many unique problems arising from mission objectives and the resulting configuration. Inherent in these configurations is a strong coupling among several of the designing disciplines. In particular, the coupling between structural dynamics and control is a key design consideration. The solution to these interactive problems requires efficient and accurate analysis, simulation and test techniques, and properly planned and conducted design trade studies. The discussion presented deals with these subjects and concludes with a brief look at some NASA capabilities which can support these technology studies.

Mason Bee Habitations: Teaching Proper "Making" Skill through Authentic Engineering Design Contests. Resources in Technology and Engineering

ERIC Educational Resources Information Center

Cool, Nate; Strimel, Greg J.; Croly, Michael; Grubbs, Michael E.

2017-01-01

To be technologically and engineering literate, people should be able to "make" or produce quality solutions to engineering design challenges while recognizing and understanding how to avoid hazards in a broad array of situations when properly using tools, machines, and materials (Haynie, 2009; Gunter, 2007; ITEA/ITEEA, 2000/2002/2007).…

ARTS: automated randomization of multiple traits for study design.

PubMed

Maienschein-Cline, Mark; Lei, Zhengdeng; Gardeux, Vincent; Abbasi, Taimur; Machado, Roberto F; Gordeuk, Victor; Desai, Ankit A; Saraf, Santosh; Bahroos, Neil; Lussier, Yves

2014-06-01

Collecting data from large studies on high-throughput platforms, such as microarray or next-generation sequencing, typically requires processing samples in batches. There are often systematic but unpredictable biases from batch-to-batch, so proper randomization of biologically relevant traits across batches is crucial for distinguishing true biological differences from experimental artifacts. When a large number of traits are biologically relevant, as is common for clinical studies of patients with varying sex, age, genotype and medical background, proper randomization can be extremely difficult to prepare by hand, especially because traits may affect biological inferences, such as differential expression, in a combinatorial manner. Here we present ARTS (automated randomization of multiple traits for study design), which aids researchers in study design by automatically optimizing batch assignment for any number of samples, any number of traits and any batch size. ARTS is implemented in Perl and is available at github.com/mmaiensc/ARTS. ARTS is also available in the Galaxy Tool Shed, and can be used at the Galaxy installation hosted by the UIC Center for Research Informatics (CRI) at galaxy.cri.uic.edu. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Shredded Waste Downdraft Gasifier for Overseas Contingency Operations Waste-to-Energy Conversion

DTIC Science & Technology

2015-06-01

results of the proposed experimental test plan and the design of a shredded waste WEC system in Task 5. A. Generators (Left) and Shredded...Shredded Waste 4 8.5 – 27.1 5.1.1.4 Wall Friction Tests In addition to a properly sized outlet, the design of a mass flow vessel must consider...consolidating pressures. 5.1.2.3 Wall Friction Tests In addition to a properly sized outlet, the design of a mass flow vessel must consider the

Developing Physics Textbook Based on Cognitive Conflict for Deeper Conceptual Understanding and Better Characters

NASA Astrophysics Data System (ADS)

Linuwih, S.; Lurinda, N. W.; Fianti

2017-04-01

These study aims are to develop a textbook based on cognitive conflict approachment, to know theproperness of textbook, the legibility of textbook, and also the effect of using the textbook for increasing the conceptual understanding and improving the character of the students. This study was conducted by research and development method employing non-equivalent control group design to test the product. The subjects wereten-grade students of SMA N 1 Gubug in thesecond semester of 2015/2016. The properness test used properness-questionnaire, while the legibility test used themost closet. The data of conceptual understanding was taken from thepretest-postest result and the data of characters was taken from direct observation. By analysing the data, we concluded that the textbook based on cognitive conflict approachment was very proper to use with high legibility. By applied this textbook, students would be helped to get a deeper conceptual understanding and better characters.

Aids in designing laboratory flumes

USGS Publications Warehouse

Williams, Garnett P.

1971-01-01

The upsurge of interest in our environment has caused research and instruction in the flow of water along open channels to become increasingly popular in universities and institutes. This, in turn, has brought a greater demand for properly-designed laboratory flumes. Whatever the reason for your interest, designing and building the flume will take a little preparation. You may choose a pattern exactly like a previous design, or you may follow the more time-consuming method of studying several existing flumes and combine the most desirable features of each.

Mars Tumbleweed Simulation Using Singular Perturbation Theory

NASA Technical Reports Server (NTRS)

Raiszadeh, Behzad; Calhoun, Phillip

2005-01-01

The Mars Tumbleweed is a new surface rover concept that utilizes Martian winds as the primary source of mobility. Several designs have been proposed for the Mars Tumbleweed, all using aerodynamic drag to generate force for traveling about the surface. The Mars Tumbleweed, in its deployed configuration, must be large and lightweight to provide the ratio of drag force to rolling resistance necessary to initiate motion from the Martian surface. This paper discusses the dynamic simulation details of a candidate Tumbleweed design. The dynamic simulation model must properly evaluate and characterize the motion of the tumbleweed rover to support proper selection of system design parameters. Several factors, such as model flexibility, simulation run times, and model accuracy needed to be considered in modeling assumptions. The simulation was required to address the flexibility of the rover and its interaction with the ground, and properly evaluate its mobility. Proper assumptions needed to be made such that the simulated dynamic motion is accurate and realistic while not overly burdened by long simulation run times. This paper also shows results that provided reasonable correlation between the simulation and a drop/roll test of a tumbleweed prototype.

The Art and Science of Psychological Operations: Case Studies of Military Application. Volume Two

DTIC Science & Technology

1976-04-01

General The casebook is designed to serve primarily as background information for training in the field of psychological operations and as an...Skidmore and Brooklyn col- leges and Rutgers University; Chief, Re- search Design Unit, U.S.I.A., 1968-1969; au- - - I thor of Political Television, Report...unsystematic gathering of information and re- seatch is that research, when properly designed and coaducted, usually reliable less systematic information is

Epidemiology and Clinical Research Design, Part 2: Principles.

PubMed

Manja, Veena; Lakshminrusimha, Satyan

This is the third article covering core knowledge in scholarly activities for neonatal physicians. In this article, we discuss various principles of epidemiology and clinical research design. A basic knowledge of these principles is necessary for conducting clinical research and for proper interpretation of studies. This article reviews bias and confounding, causation, incidence and prevalence, decision analysis, cost-effectiveness, sensitivity analysis, and measurement.

The stem cell laboratory: design, equipment, and oversight.

PubMed

Wesselschmidt, Robin L; Schwartz, Philip H

2011-01-01

This chapter describes some of the major issues to be considered when setting up a laboratory for the culture of human pluripotent stem cells (hPSCs). The process of establishing a hPSC laboratory can be divided into two equally important parts. One is completely administrative and includes developing protocols, seeking approval, and establishing reporting processes and documentation. The other part of establishing a hPSC laboratory involves the physical plant and includes design, equipment and personnel. Proper planning of laboratory operations and proper design of the physical layout of the stem cell laboratory so that meets the scope of planned operations is a major undertaking, but the time spent upfront will pay long-term returns in operational efficiency and effectiveness. A well-planned, organized, and properly equipped laboratory supports research activities by increasing efficiency and reducing lost time and wasted resources.

Development of a framework for evaluating yellow timing at signalized intersections.

DOT National Transportation Integrated Search

2011-02-01

Studies show that the proper design of clearance intervals has significant implications for intersection safety. For : example, in 2001, approximately 218,000 red-light-running crashes occurred at signalized intersections in the United States. : Thes...

IDENTIFICATION OF SEDIMENT SOURCE AREAS WITHIN A WATERSHED

EPA Science Inventory

Identification of sediment source areas is crucial for designing proper abatement strategies that reduce sediment and associated contaminant loading to receiving water downstream. In this study, two methodologies were developed to identify the source areas and their relative stre...

Porter's generic strategies, discontinuous environments, and performance: a longitudinal study of changing strategies in the hospital industry.

PubMed Central

Lamont, B T; Marlin, D; Hoffman, J J

1993-01-01

OBJECTIVE. Changes in generic strategies in response to discontinuous environments have been relatively ignored in the management literature. This study reports an examination of the relationships between Porter's (1980) generic strategies, discontinuous environments, and performance. DATA SOURCES. Archival data for 1984 and 1988 were collected for 172 acute care hospitals in Florida in order to test these relationships. STUDY DESIGN. To examine fully the performance impact of changes in strategy in a discontinuous environment, a longitudinal research design that identified a firm's strategy at two points in time, 1984 and 1988, was used. PRINCIPAL FINDINGS. Results indicate that firms with a proper strategy environment fit performed the highest, firms that did not change their strategy had no change in performance, and firms that changed their strategy toward a proper strategy environment showed an increase in performance. CONCLUSION. Findings support the notion that hospitals with appropriate strategy-environment combinations will exhibit higher performance. PMID:8270424

Recommendations for postmarketing surveillance studies in haemophilia and other bleeding disorders.

PubMed

Lassila, R; Rothschild, C; De Moerloose, P; Richards, M; Perez, R; Gajek, H

2005-07-01

Prospective surveillance studies to monitor drug safety in the postapproval period are rarely employed systematically, although they are of greatest value for caregivers, drug users and regulatory authorities. Safety issues have affected not only conventional pharmaceuticals, but also especially coagulation factors in haemophilia treatment. The reputation of postmarketing surveillance (PMS) studies has been questionable, mainly due to their misuse to solicit prescriptions. Other weaknesses include inappropriate design, lack of standardized observation, limited follow-up periods, absence of rigour in identifying potential adverse drug effects, and infrequent publication. Although well-designed clinical trials represent the gold standard for generating sound clinical evidence, a number of aspects would make PMS studies valuable, if properly conducted. One of their main advantages is broader inclusion, and absence of an 'experimental' design. Lack of proper guidelines, and standardization may constitute a reason for the generally low quality of PMS studies. This paper proposes guidelines for haemophilia-specific PMS studies, in order to improve the acceptance of a basically valuable tool. In the absence of consistent regulatory guidance it will be especially important that the design and supervision of PMS studies involves physicians from the beginning. This will not only make such studies more scientifically relevant, but also help to implement them into daily clinical practice. Specifically in haemophilia, PMS studies may provide valuable data on clinical outcomes, or Quality of Life, which is of great importance when considering adequate standards of care in haemophilia patients.

Problems, pitfalls and probes: Welcome to the jungle of electrochemical noise technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edgemon, G.L.

1998-02-19

The rise in electrochemical noise (EN) as a corrosion monitoring technique has resulted in unique problems associated with the field application of this method. Many issues relate to the design of the EN probe electrodes. The ability of an electrochemical noise monitoring system to identify and discriminate between localized corrosion mechanisms is related primarily to the capability of the probe to separate the corrosion cell anode from the corresponding cathode. Effectiveness of this separation is largely determined by the details of and the proper design of the probe that is in the environment of interest. No single probe design ormore » geometry can be effectively use in every situation to monitor all types of corrosion. In this paper the authors focus on a case study and probe development history related to monitoring corrosion in an extremely hostile environment using EN. While the ultimate application of EN was and continues to be successful, the case study shows that patience and persistence was necessary to meet and properly implement the monitoring program. Other possible source of problems and frustration with implementing EN are also discussed.« less

Economic Valuation of Air Force Environmental Resources: A Contingent Valuation Case Study.

DTIC Science & Technology

1996-12-01

Empirical Measures of Welfare Change: A Comparison of Non-market Techniques," Land Economics: 156-175 (Vol. 61, No. 2, 1985). Sen , Amartya K...shackles of the traditional [observed] approach" ( Sen , 1977). The flexibility of a properly designed contingent valuation study allows CVM to measure

Explicit parametric solutions of lattice structures with proper generalized decomposition (PGD) - Applications to the design of 3D-printed architectured materials

NASA Astrophysics Data System (ADS)

Sibileau, Alberto; Auricchio, Ferdinando; Morganti, Simone; Díez, Pedro

2018-01-01

Architectured materials (or metamaterials) are constituted by a unit-cell with a complex structural design repeated periodically forming a bulk material with emergent mechanical properties. One may obtain specific macro-scale (or bulk) properties in the resulting architectured material by properly designing the unit-cell. Typically, this is stated as an optimal design problem in which the parameters describing the shape and mechanical properties of the unit-cell are selected in order to produce the desired bulk characteristics. This is especially pertinent due to the ease manufacturing of these complex structures with 3D printers. The proper generalized decomposition provides explicit parametic solutions of parametric PDEs. Here, the same ideas are used to obtain parametric solutions of the algebraic equations arising from lattice structural models. Once the explicit parametric solution is available, the optimal design problem is a simple post-process. The same strategy is applied in the numerical illustrations, first to a unit-cell (and then homogenized with periodicity conditions), and in a second phase to the complete structure of a lattice material specimen.

Physiotherapy treatment of the diabetic shoulder: a longitudinal study following patients with diabetes and shoulder pain using a pre-post treatment design.

PubMed

Kyhlbäck, Maria; Schröder Winter, Helena; Thierfelder, Tomas; Söderlund, Anne

2014-01-01

The aim of this study was to describe and evaluate a physiotherapy program targeted to reduce pain intensity and improve the daily functioning of diabetics with shoulder problems. It was hypothesized that patients receiving specific physiotherapy treatment improved more frequently and rapidly than diabetic patients followed up without specific physiotherapeutic intervention. A pre-post treatment design was completed for a group of 10 subjects. The treatment protocol, also applied during the daily activities of the subjects, was aiming at reducing pain intensity and shoulder stiffness and improving impaired functioning in daily activities by muscle relaxation, light-load exercise and enhancing proper shoulder co-ordination. The group analysis showed significant decrease of pain intensity level as well as improved shoulder functioning and sustained level of subject self-efficacy beliefs throughout the study period. The results suggest that it is possible to relieve shoulder pain intensity and improve daily activities of patients with diabetes-related shoulder problems by employing a physiotherapy program focusing on muscle relaxation, light-load exercise and on the enhancement of proper shoulder co-ordination in daily activities. A physiotherapy program can be effective in reducing pain and improving shoulder function in diabetics with shoulder problems. The treatment should focus on muscle relaxation, light-load exercise and on the enhancement of proper shoulder co-ordination in daily activities.

Statistical inference for extended or shortened phase II studies based on Simon's two-stage designs.

PubMed

Zhao, Junjun; Yu, Menggang; Feng, Xi-Ping

2015-06-07

Simon's two-stage designs are popular choices for conducting phase II clinical trials, especially in the oncology trials to reduce the number of patients placed on ineffective experimental therapies. Recently Koyama and Chen (2008) discussed how to conduct proper inference for such studies because they found that inference procedures used with Simon's designs almost always ignore the actual sampling plan used. In particular, they proposed an inference method for studies when the actual second stage sample sizes differ from planned ones. We consider an alternative inference method based on likelihood ratio. In particular, we order permissible sample paths under Simon's two-stage designs using their corresponding conditional likelihood. In this way, we can calculate p-values using the common definition: the probability of obtaining a test statistic value at least as extreme as that observed under the null hypothesis. In addition to providing inference for a couple of scenarios where Koyama and Chen's method can be difficult to apply, the resulting estimate based on our method appears to have certain advantage in terms of inference properties in many numerical simulations. It generally led to smaller biases and narrower confidence intervals while maintaining similar coverages. We also illustrated the two methods in a real data setting. Inference procedures used with Simon's designs almost always ignore the actual sampling plan. Reported P-values, point estimates and confidence intervals for the response rate are not usually adjusted for the design's adaptiveness. Proper statistical inference procedures should be used.

Aerodynamic design of gas and aerosol samplers for aircraft

NASA Technical Reports Server (NTRS)

Soderman, Paul T.; Hazen, Nathan L.; Brune, William H.

1991-01-01

The aerodynamic design of airborne probes for the capture of air and aerosols is discussed. Emphasis is placed on the key parameters that affect proper sampling, such as inlet-lip design, internal duct components for low pressure drop, and exhaust geometry. Inlet designs that avoid sonic flow conditions on the lip and flow separation in the duct are shown. Cross-stream velocities of aerosols are expressed in terms of droplet density and diameter. Flow curvature, which can cause aerosols to cross streamlines and impact on probe walls, can be minimized by means of a proper inlet shape and proper probe orientation, and by avoiding bends upstream of the test section. A NASA panel code called PMARC was used successfully to compute streamlines around aircraft and probes, as well as to compute to local velocity and pressure distributions in inlets. A NACA 1-series inlet with modified lip radius was used for the airborne capture of stratospheric chlorine monoxide at high altitude and high flight speed. The device has a two-stage inlet that decelerates the inflow with little disturbance to the flow through the test section. Diffuser design, exhaust hood design, valve loss, and corner vane geometry are discussed.

Epidemiology and Clinical Research Design, Part 2: Principles

PubMed Central

Manja, Veena; Lakshminrusimha, Satyan

2015-01-01

This is the third article covering core knowledge in scholarly activities for neonatal physicians. In this article, we discuss various principles of epidemiology and clinical research design. A basic knowledge of these principles is necessary for conducting clinical research and for proper interpretation of studies. This article reviews bias and confounding, causation, incidence and prevalence, decision analysis, cost-effectiveness, sensitivity analysis, and measurement. PMID:26236171

The Stem Cell Laboratory: Design, Equipment, and Oversight

PubMed Central

Wesselschmidt, Robin L.; Schwartz, Philip H.

2013-01-01

This chapter describes some of the major issues to be considered when setting up a laboratory for the culture of human pluripotent stem cells (hPSCs). The process of establishing a hPSC laboratory can be divided into two equally important parts. One is completely administrative and includes developing protocols, seeking approval, and establishing reporting processes and documentation. The other part of establishing a hPSC laboratory involves the physical plant and includes design, equipment and personnel. Proper planning of laboratory operations and proper design of the physical layout of the stem cell laboratory so that meets the scope of planned operations is a major undertaking, but the time spent upfront will pay long-term returns in operational efficiency and effectiveness. A well-planned, organized, and properly equipped laboratory supports research activities by increasing efficiency and reducing lost time and wasted resources. PMID:21822863

Methodological considerations in the design and implementation of clinical trials.

PubMed

Cirrincione, Constance T; Lavoie Smith, Ellen M; Pang, Herbert

2014-02-01

To review study design issues related to clinical trials led by oncology nurses, with special attention to those conducted within the cooperative group setting; to emphasize the importance of the statistician's role in the process of clinical trials. Studies available at clinicaltrials.gov using experimental designs that have been published in peer-reviewed journals; cooperative group trials are highlighted. The clinical trial is a primary means to test intervention efficacy. A properly designed and powered study with clear and measurable objectives is as important as the intervention itself. Collaboration among the study team, including the statistician, is central in developing and conducting appropriately designed studies. For optimal results, collaboration is an ongoing process that should begin early on. Copyright © 2014 Elsevier Inc. All rights reserved.

Considerations on Experimental Design and Data Analysis of Chromatin Immunoprecipitation Experiments.

PubMed

Jordán-Pla, Antonio; Visa, Neus

2018-01-01

Arguably one of the most valuable techniques to study chromatin organization, ChIP is the method of choice to map the contacts established between proteins and genomic DNA. Ever since its inception, more than 30 years ago, ChIP has been constantly evolving, improving, and expanding its capabilities and reach. Despite its widespread use by many laboratories across a wide variety of disciplines, ChIP assays can be sometimes challenging to design, and are often sensitive to variations in practical implementation.In this chapter, we provide a general overview of the ChIP method and its most common variations, with a special focus on ChIP-seq. We try to address some of the most important aspects that need to be taken into account in order to design and perform experiments that generate the most reproducible, high-quality data. Some of the main topics covered include the use of properly characterized antibodies, alternatives to chromatin preparation, the need for proper controls, and some recommendations about ChIP-seq data analysis.

Designing Professional Development That Works.

ERIC Educational Resources Information Center

Birman, Beatrice F.; Desimone, Laura; Porter, Andrew C.; Garet, Michael S.

2000-01-01

By studying survey data from 1,000 teachers participating in a Title II workshop, researchers identified three structural features (form, duration, and collective participation) that set a proper context for professional development. Three core features of professional-development learning experience include content focus, active learning, and…

A study of commuter airplane design optimization

NASA Technical Reports Server (NTRS)

Keppel, B. V.; Eysink, H.; Hammer, J.; Hawley, K.; Meredith, P.; Roskam, J.

1978-01-01

The usability of the general aviation synthesis program (GASP) was enhanced by the development of separate computer subroutines which can be added as a package to this assembly of computerized design methods or used as a separate subroutine program to compute the dynamic longitudinal, lateral-directional stability characteristics for a given airplane. Currently available analysis methods were evaluated to ascertain those most appropriate for the design functions which the GASP computerized design program performs. Methods for providing proper constraint and/or analysis functions for GASP were developed as well as the appropriate subroutines.

On the Misinterpretation of Histograms and Box Plots

ERIC Educational Resources Information Center

Lem, Stephanie; Onghena, Patrick; Verschaffel, Lieven; Van Dooren, Wim

2013-01-01

Recent studies have shown that the interpretation of graphs is not always easy for students. In order to reason properly about distributions of data, however, one needs to be able to interpret graphical representations of these distributions correctly. In this study, we used Tversky's principles for the design of graphs to explain how 125…

The Study Abroad Experience: A Crucial Element in Globalizing Business School Programs

ERIC Educational Resources Information Center

Mangiero, George A.; Kraten, Michael

2011-01-01

Globalization is a fundamental reality of modern business practice. Participation in a study abroad program is a crucial element in helping students become well rounded global business leaders; it is an increasingly important element of a well rounded business curriculum. A semester or summer abroad, properly conceived and designed, can provide…

Fire in High Buildings. Fire Study No. 21.

ERIC Educational Resources Information Center

Galbreath, M.

Research into and measures of fire protection with regard to high building design are discussed with suggestions for proper building equipment, materials, and planning. The study outlines how smoke and toxic gases spread in high buildings through stairs, service shafts, air handling and heating equipment. The problems of basement fires, means of…

Interior effects on comfort in healthcare waiting areas.

PubMed

Bazley, C; Vink, P; Montgomery, J; Hedge, A

2016-07-21

This study compared the effects of pre-experience and expectations on participant comfort upon waking, arrival to, and after an appointment, as well as the assessment of properly placed Feng Shui elements in three healthcare waiting rooms. Participants assessed comfort levels using self-report surveys. The researcher conducted 'intention interviews' with each doctor to assess the goals of each waiting area design, and conducted a Feng Shui assessment of each waiting area for properly placed Feng Shui elements. The waiting area designed by the Feng Shui expert rated 'most comfortable', followed by the waiting area design by a doctor, and the lowest comfort rating for the conventional waiting room design. Results show a sufficiently strong effect to warrant further research. Awareness of the external environment, paired with pre-experience and expectation, influences comfort for people over time. Fostering and encouraging a holistic approach to comfort utilizing eastern and western concepts and ergonomic principles creates a sense of "placeness" and balance in the design for comfort in built environments. This is new research information on the influences of the comfort experience over time, to include pre-experience, expectations and the placement of elements in the external environment.

Taking Care of Business.

ERIC Educational Resources Information Center

Stone, William E.

1989-01-01

Properly designed and properly evaluated, entrepreneurial activities can have many kinds of positive financial and non-financial results for an alumni program. A service or product line that alumni can not get from any other source can benefit the budget and both internal and external goodwill. (MSE)

FOOD RISK ANALYSIS

USDA-ARS?s Scientific Manuscript database

Food risk analysis is a holistic approach to food safety because it considers all aspects of the problem. Risk assessment modeling is the foundation of food risk analysis. Proper design and simulation of the risk assessment model is important to properly predict and control risk. Because of knowl...

Guidelines and Suggestions for Balloon Gondola Design

NASA Technical Reports Server (NTRS)

Franco, Hugo

2017-01-01

This paper discusses the current gondola design requirements for the Columbia Scientific Balloon Facility (CSBF). The CSBF is responsible for launching and supporting balloon borne scientific instruments and has some current updated guidelines that will be discussed in this presentation. As the sophistication of Payload systems have increased in size and complexity new guidelines have been implemented in order to make these instruments stay within the acceptable launch risks. Additionally, there is a requirement to submit a proper stress analysis report that states the flight design requirements have been met. Suggestions are discussed in this presentation that establish the proper guidelines to submit these.

Conceptual design study of 1985 commercial VTOL transports that utilize rotors

NASA Technical Reports Server (NTRS)

Kefford, N. F. K.; Munch, C. L.

1975-01-01

Conceptual design studies of pure and compound helicopter commercial short-haul transport aircraft for initial fabrication in 1980 were performed to determine their technical and economic feasibility. One-hundred-passenger configurations were optimized for minimum direct operating cost consistent with producibility and marketability, with emphasis on proper account of mass properties, performance and handling qualities adequacy, and suppression of internal and external noise. The effect of external noise constraints was assessed, in terms of gross weight and direct operating cost, for each aircraft.

Anatomic tibial component design can increase tibial coverage and rotational alignment accuracy: a comparison of six contemporary designs.

PubMed

Dai, Yifei; Scuderi, Giles R; Bischoff, Jeffrey E; Bertin, Kim; Tarabichi, Samih; Rajgopal, Ashok

2014-12-01

The aim of this study was to comprehensively evaluate contemporary tibial component designs against global tibial anatomy. We hypothesized that anatomically designed tibial components offer increased morphological fit to the resected proximal tibia with increased alignment accuracy compared to symmetric and asymmetric designs. Using a multi-ethnic bone dataset, six contemporary tibial component designs were investigated, including anatomic, asymmetric, and symmetric design types. Investigations included (1) measurement of component conformity to the resected tibia using a comprehensive set of size and shape metrics; (2) assessment of component coverage on the resected tibia while ensuring clinically acceptable levels of rotation and overhang; and (3) evaluation of the incidence and severity of component downsizing due to adherence to rotational alignment and overhang requirements, and the associated compromise in tibial coverage. Differences in coverage were statistically compared across designs and ethnicities, as well as between placements with or without enforcement of proper rotational alignment. Compared to non-anatomic designs investigated, the anatomic design exhibited better conformity to resected tibial morphology in size and shape, higher tibial coverage (92% compared to 85-87%), more cortical support (posteromedial region), lower incidence of downsizing (3% compared to 39-60%), and less compromise of tibial coverage (0.5% compared to 4-6%) when enforcing proper rotational alignment. The anatomic design demonstrated meaningful increase in tibial coverage with accurate rotational alignment compared to symmetric and asymmetric designs, suggesting its potential for less intra-operative compromises and improved performance. III.

Standardization of Course Plan and Design of Objective Structured Field Examination (OSFE) for the Assessment of Pharm.D. Student’s Community Pharmacy Clerkship Skills

PubMed Central

Monajjemzadeh, Farnaz; Shokri, Javad; Mohajel Nayebi, Ali Reza; Nemati, Mahboob; Azarmi, Yadollah; Charkhpour, Mohammad; Najafi, Moslem

2014-01-01

Purpose: This study was aimed to design Objective Structured Field Examination (OSFE) and also standardize the course plan of community pharmacy clerkship at Pharmacy Faculty of Tabriz University of Medical Sciences (Iran). Methods: The study was composed of several stages including; evaluation of the old program, standardization and implementation of the new course plan, design and implementation of OSFE, and finally results evaluation. Results: Lack of a fair final assessment protocol and proper organized educating system in various fields of community pharmacy clerkship skills were assigned as the main weaknesses of the old program. Educational priorities were determined and student’s feedback was assessed to design the new curriculum consisting of sessions to fulfill a 60-hour training course. More than 70% of the students were satisfied and successfulness and efficiency of the new clerkship program was significantly greater than the old program (P<0.05). In addition, they believed that OSFE was a suitable testing method. Conclusion: The defined course plan was successfully improved different skills of the students and OSFE was concluded as a proper performance based assessment method. This is easily adoptable by pharmacy faculties to improve the educational outcomes of the clerkship course. PMID:24511477

Design and analysis of lifting tool assemblies to lift different engine block

NASA Astrophysics Data System (ADS)

Sawant, Arpana; Deshmukh, Nilaj N.; Chauhan, Santosh; Dabhadkar, Mandar; Deore, Rupali

2017-07-01

Engines block are required to be lifted from one place to another while they are being processed. The human effort required for this purpose is more and also the engine block may get damaged if it is not handled properly. There is a need for designing a proper lifting tool which will be able to conveniently lift the engine block and place it at the desired position without any accident and damage to the engine block. In the present study lifting tool assemblies are designed and analyzed in such way that it may lift different categories of engine blocks. The lifting tool assembly consists of lifting plate, lifting ring, cap screws and washers. A parametric model and assembly of Lifting tool is done in 3D modelling software CREO 2.0 and analysis is carried out in ANSYS Workbench 16.0. A test block of weight equivalent to that of an engine block is considered for the purpose of analysis. In the preliminary study, without washer the stresses obtained on the lifting tool were more than the safety margin. In the present design, washers were used with appropriate dimensions which helps to bring down the stresses on the lifting tool within the safety margin. Analysis is carried out to verify that tool design meets the ASME BTH-1 required safety margin.

Using multivariate generalizability theory to assess the effect of content stratification on the reliability of a performance assessment.

PubMed

Keller, Lisa A; Clauser, Brian E; Swanson, David B

2010-12-01

In recent years, demand for performance assessments has continued to grow. However, performance assessments are notorious for lower reliability, and in particular, low reliability resulting from task specificity. Since reliability analyses typically treat the performance tasks as randomly sampled from an infinite universe of tasks, these estimates of reliability may not be accurate. For tests built according to a table of specifications, tasks are randomly sampled from different strata (content domains, skill areas, etc.). If these strata remain fixed in the test construction process, ignoring this stratification in the reliability analysis results in an underestimate of "parallel forms" reliability, and an overestimate of the person-by-task component. This research explores the effect of representing and misrepresenting the stratification appropriately in estimation of reliability and the standard error of measurement. Both multivariate and univariate generalizability studies are reported. Results indicate that the proper specification of the analytic design is essential in yielding the proper information both about the generalizability of the assessment and the standard error of measurement. Further, illustrative D studies present the effect under a variety of situations and test designs. Additional benefits of multivariate generalizability theory in test design and evaluation are also discussed.

How to test herbicides at forest tree nurseries.

Treesearch

Roger E. Sandquist; Peyton W. Owston; Stephen E. McDonald

1981-01-01

Procedures developed in a cooperative westwide study of weed control in forest tree nurseries are described in a form modified for use by nursery managers. The proven, properly designed test and evaluation methods can be used to generate data needed for evaluation and registration of herbicides.

Principals' Performance in Promoting Learning Climate in Ebonyi State Secondary Schools

ERIC Educational Resources Information Center

Egwu, Sarah Oben

2015-01-01

This study was conducted to determine principals' performance in promoting learning climate in Ebonyi State secondary schools. A sample of 630 teachers completed a 12-item questionnaire designed for the study. Out of 630 copies of the questionnaire distributed, 606 copies representing about 96.2% return rate were properly completed and returned.…

Statistical inference for the additive hazards model under outcome-dependent sampling.

PubMed

Yu, Jichang; Liu, Yanyan; Sandler, Dale P; Zhou, Haibo

2015-09-01

Cost-effective study design and proper inference procedures for data from such designs are always of particular interests to study investigators. In this article, we propose a biased sampling scheme, an outcome-dependent sampling (ODS) design for survival data with right censoring under the additive hazards model. We develop a weighted pseudo-score estimator for the regression parameters for the proposed design and derive the asymptotic properties of the proposed estimator. We also provide some suggestions for using the proposed method by evaluating the relative efficiency of the proposed method against simple random sampling design and derive the optimal allocation of the subsamples for the proposed design. Simulation studies show that the proposed ODS design is more powerful than other existing designs and the proposed estimator is more efficient than other estimators. We apply our method to analyze a cancer study conducted at NIEHS, the Cancer Incidence and Mortality of Uranium Miners Study, to study the risk of radon exposure to cancer.

Statistical inference for the additive hazards model under outcome-dependent sampling

PubMed Central

Yu, Jichang; Liu, Yanyan; Sandler, Dale P.; Zhou, Haibo

2015-01-01

Cost-effective study design and proper inference procedures for data from such designs are always of particular interests to study investigators. In this article, we propose a biased sampling scheme, an outcome-dependent sampling (ODS) design for survival data with right censoring under the additive hazards model. We develop a weighted pseudo-score estimator for the regression parameters for the proposed design and derive the asymptotic properties of the proposed estimator. We also provide some suggestions for using the proposed method by evaluating the relative efficiency of the proposed method against simple random sampling design and derive the optimal allocation of the subsamples for the proposed design. Simulation studies show that the proposed ODS design is more powerful than other existing designs and the proposed estimator is more efficient than other estimators. We apply our method to analyze a cancer study conducted at NIEHS, the Cancer Incidence and Mortality of Uranium Miners Study, to study the risk of radon exposure to cancer. PMID:26379363

Factors affecting the retrieval of famous names.

PubMed

Martins, Isabel Pavão; Loureiro, Clara; Rodrigues, Susana; Dias, Beatriz; Slade, Peter

2010-06-01

Tests of famous faces are used to study language and memory. Yet, the effect of stimulus properties on performance has not been fully investigated. To identify factors influencing proper name retrieval and to probe stimulus-specific parameters within proper name lexicon, we analysed the results obtained by 300 healthy participants on a test of famous faces that includes 74 personalities. A factor analysis yielded five main factors that were characterized by language (national or foreign names), epoch of peak popularity (current, recent or past) and occupation (politicians, entertainment and sports) of the personalities. Multiple regression analysis showed that participants' education, age and gender accounted for 10-32% of the variance in factor scores. These results indicate that there are variables of the stimulus and participants' that must be taken into account in proper name testing and in designing tests aimed to differentiate age-associated difficulties from cognitive decline.

Planning and Design of Seawater Reverse Osmosis Desalination Plants Marine Outfalls

NASA Astrophysics Data System (ADS)

Maalouf, S.; Yeh, W. W.

2011-12-01

Increasing demands for water in urban areas and agricultural zones in arid and semi-arid regions have urged planners and regulators to look for alternative renewable water sources. Worldwide, seawater reverse osmosis (SWRO) desalination plants have become an essential supply source for the production of fresh water in such regions. Disposal of their wastes, however, has not been fully and properly addressed. This study presents a strategy for the analysis and design of optimal disposal systems of hypersaline wastes that are generated by SWRO desalination plants. The study evaluates current disposal methods and recommends ways to effectively employ multiport marine outfalls for this purpose. Such outfalls emerged as reliable means for conveying wastes from process plants, to include wastewater treatment and power plants, into the coastal waters. Their proper use, however, in conjunction with SWRO desalination plants is still in its beginning stage, and much work needs to be done to employ them effectively. Therefore, the main objective of this research is to provide design engineers with effective procedures that meet environmental permitting requirements and restrictions, while ascertaining adequate hydrodynamic performance. The study is tested by employing a simulation model and examining its reliability under many parameter perturbation scenarios. This is further extended by providing a solution to the same problem using a heuristic approach.

Safe Youth. Safe Schools.

MedlinePlus

... evidence. Research/Data Sources Crime Prevention Through Environmental Design (CPTED) School Project Research has shown that proper environmental design can reduce crime and fear associated with criminal ...

Scanning Kirkpatrick-Baez X-ray telescope to maximize effective area and eliminate spurious images - Design

NASA Technical Reports Server (NTRS)

Kast, J. W.

1975-01-01

We consider the design of a Kirkpatrick-Baez grazing-incidence X-ray telescope to be used in a scan of the sky and analyze the distribution of both properly reflected rays and spurious images over the field of view. To obtain maximum effective area over the field of view, it is necessary to increase the spacing between plates for a scanning telescope as compared to a pointing telescope. Spurious images are necessarily present in this type of lens, but they can be eliminated from the field of view by adding properly located baffles or collimators. Results of a computer design are presented.

Properties of cutoff corrugated surfaces for corrugated horn design. [corrugation shape and density effects on scattering

NASA Technical Reports Server (NTRS)

Mentzer, C. A.; Peters, L., Jr.

1974-01-01

Corrugated horns involve a junction between the corrugated surface and a conducting ground plane. Proper horn design requires an understanding of the electromagnetic properties of the corrugated surface and this junction. An integral equation solution has been used to study the influence of corrugation density and tooth thickness on the power loss, surface current, and the scattering from a ground plane/corrugated surface junction.

Auto-Mechanics Course. Bilingual Vocational Instructional Materials.

ERIC Educational Resources Information Center

Lopez-Cox, Guadalupe

This auto-mechanics course, one of a series of bilingual English-Spanish vocational education courses, is designed to introduce the basic skills that an automotive mechanics student should know. It is geared to teach the student basic manipulative skills, safety judgments, proper work habits, desirable attitudes, and proper behavior for initial…

Minimum-Impact Camping in the Front Woods.

ERIC Educational Resources Information Center

Schatz, Curt

1994-01-01

Minimum-impact camping techniques that can be applied to resident camp programs include controlling group size and behavior, designing camp sites, moving groups frequently, proper use of fires, proper disposal of food and human wastes, use of biodegradable soaps, and encouraging staff and camper awareness of impacts on the environment. (LP)

High Power Microwave (HPM) and Ionizing Radiation Effects on CMOS Devices

DTIC Science & Technology

2010-03-01

24 xviii Symbol Page VIH minimum input voltage for proper high voltage output...38 VOH output voltage corresponding to VIH ...design. The high level at the input, VIH , along with VDD, define the maximum permitted “Logic 1” region, which allows for proper state change for a

Geoexchange: Getting it Right

ERIC Educational Resources Information Center

Johnson, William C.; Ormond, Paul

2013-01-01

If properly installed, optimized geoexchange systems can be one of the most cost effective, powerful options to accomplish the goal of improved energy efficiency and reduced carbon emissions. Accurately quantifying field performance is an important step in designing a system that is the proper size and capacity. The authors share the real life…

36 CFR 1234.10 - What are the facility requirements for all records storage facilities?

Code of Federal Regulations, 2014 CFR

2014-07-01

... the HVAC systems, fire alarm and fire protection systems. Manual switching between sources of service... elements are protected by a properly installed, properly maintained wet-pipe automatic sprinkler system, as... must provide documentation that the facility has a fire suppression system specifically designed to...

Landmarks selection in street map design

NASA Astrophysics Data System (ADS)

Kao, C. J.

2014-02-01

In Taiwan many electrical maps present their landmarks according to the category of the feature, a designer short of knowledge about mental representation of space, can cause the map to lose its communication effects. To resolve this map design problem, in this research through long-term memory recall, navigation and observation, and short-term memory processing 111 participants were asked to select the proper landmark from study area. The results reveal that in Taiwan convenience stores are the most popular local landmark in rural and urban areas. Their commercial signs have a unique design and bright color. Contrasted to their background, this makes the convenience store a salient feature. This study also developed a rule to assess the priority of the landmarks to design them in different scale maps.

A Literature Review: Website Design and User Engagement.

PubMed

Garett, Renee; Chiu, Jason; Zhang, Ly; Young, Sean D

2016-07-01

Proper design has become a critical element needed to engage website and mobile application users. However, little research has been conducted to define the specific elements used in effective website and mobile application design. We attempt to review and consolidate research on effective design and to define a short list of elements frequently used in research. The design elements mentioned most frequently in the reviewed literature were navigation, graphical representation, organization, content utility, purpose, simplicity, and readability. We discuss how previous studies define and evaluate these seven elements. This review and the resulting short list of design elements may be used to help designers and researchers to operationalize best practices for facilitating and predicting user engagement.

A Literature Review: Website Design and User Engagement

PubMed Central

Garett, Renee; Chiu, Jason; Zhang, Ly; Young, Sean D.

2015-01-01

Proper design has become a critical element needed to engage website and mobile application users. However, little research has been conducted to define the specific elements used in effective website and mobile application design. We attempt to review and consolidate research on effective design and to define a short list of elements frequently used in research. The design elements mentioned most frequently in the reviewed literature were navigation, graphical representation, organization, content utility, purpose, simplicity, and readability. We discuss how previous studies define and evaluate these seven elements. This review and the resulting short list of design elements may be used to help designers and researchers to operationalize best practices for facilitating and predicting user engagement. PMID:27499833

Design, fabrication and systems integration of a satellite tracked, free-drifting ocean data buoy

NASA Technical Reports Server (NTRS)

Wallace, J. W.; Cox, J. W.

1976-01-01

Engineering details are presented of a small free-drifting buoy configuration designed for use in the study of continental shelf water circulation patterns in the Chesapeake Bight of the Western North Atlantic Ocean. The buoy incoporated French instrumentation and was interrogated by the French EOLE satellite to provide position and four channels of temperature data. The buoy design included a variable depth drogue and a power supply sufficient for six weeks of continuous operations. Proof tests of the configuration indicated an adequate design and subsequent field experiments verified the proper functioning of the system.

Magic Mirror, On the Wall-Which Is the Right Study Design of Them All?-Part II.

PubMed

Vetter, Thomas R

2017-07-01

The assessment of a new or existing treatment or other intervention typically answers 1 of 3 central research-related questions: (1) "Can it work?" (efficacy); (2) "Does it work?" (effectiveness); or (3) "Is it worth it?" (efficiency or cost-effectiveness). There are a number of study designs that, on a situational basis, are appropriate to apply in conducting research. These study designs are generally classified as experimental, quasiexperimental, or observational, with observational studies being further divided into descriptive and analytic categories. This second of a 2-part statistical tutorial reviews these 3 salient research questions and describes a subset of the most common types of observational study designs. Attention is focused on the strengths and weaknesses of each study design to assist in choosing which is appropriate for a given study objective and hypothesis as well as the particular study setting and available resources and data. Specific studies and papers are highlighted as examples of a well-chosen, clearly stated, and properly executed study design type.

Magic Mirror, on the Wall-Which Is the Right Study Design of Them All?-Part I.

PubMed

Vetter, Thomas R

2017-06-01

The assessment of a new or existing treatment or intervention typically answers 1 of 3 research-related questions: (1) "Can it work?" (efficacy); (2) "Does it work?" (effectiveness); and (3) "Is it worth it?" (efficiency or cost-effectiveness). There are a number of study designs that on a situational basis are appropriate to apply in conducting research. These study designs are classified as experimental, quasi-experimental, or observational, with observational studies being further divided into descriptive and analytic categories. This first of a 2-part statistical tutorial reviews these 3 salient research questions and describes a subset of the most common types of experimental and quasi-experimental study design. Attention is focused on the strengths and weaknesses of each study design to assist in choosing which is appropriate for a given study objective and hypothesis as well as the particular study setting and available resources and data. Specific studies and papers are highlighted as examples of a well-chosen, clearly stated, and properly executed study design type.

Examining Students' Reluctance to Use Graphs

ERIC Educational Resources Information Center

Dyke, Frances Van; White, Alexander

2004-01-01

An evaluation designed to test basic graphical-thinking skills to students entering calculus or applied calculus at American University was given to use the assessment to discover the underlying causes for student's inability to use graphs effectively. The study indicates that graphical representation is not emphasized properly in the curriculum…

Study Finds Consumer Food Safety Knowledge Lacking

ERIC Educational Resources Information Center

Godwin, Sandria; Coppings, Richard; Speller-Henderson, Leslie; Pearson, Lou

2005-01-01

Proper cooling of foods is known to reduce spoilage and help prevent food-borne illnesses. Nonetheless, little is known about consumers' awareness of guidelines regarding appropriate refrigeration of food or their actual refrigeration practices. Focus groups of consumers of common ethnic backgrounds were designed to evaluate food safety knowledge…

The balanced incomplete block design is not suitable for the evaluation of complex interventions.

PubMed

Trietsch, Jasper; Leffers, Pieter; van Steenkiste, Ben; Grol, Richard; van der Weijden, Trudy

2014-12-01

In quality of care research, the balanced incomplete block (BIB) design is regularly claimed to have been used when evaluating complex interventions. In this article, we reflect on the appropriateness of using this design for evaluating complex interventions. Literature study using PubMed and handbooks. After studying various articles on health services research that claim to have applied the BIB and the original methodological literature on this design, it became clear that the applied method is in fact not a BIB design. We conclude that the use of this design is not suited for evaluating complex interventions. We stress that, to prevent improper use of terms, more attention should be paid to proper referencing of the original methodological literature. Copyright © 2014 Elsevier Inc. All rights reserved.

Multi-directional energy harvesting by piezoelectric cantilever-pendulum with internal resonance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, J.; Tang, J., E-mail: jtang@engr.uconn.edu

This letter reports a piezoelectric cantilever-pendulum design for multi-directional energy harvesting. A pendulum is attached to the tip of a piezoelectric cantilever-type energy harvester. This design aims at taking advantage of the nonlinear coupling between the pendulum motion in 3-dimensional space and the beam bending vibration at resonances. Experimental studies indicate that, under properly chosen parameters, 1:2 internal resonance can be induced, which enables the multi-directional energy harvesting with a single cantilever. The advantages of the design with respect to traditional piezoelectric cantilever are examined.

CO2 laser ranging systems study

NASA Technical Reports Server (NTRS)

Filippi, C. A.

1975-01-01

The conceptual design and error performance of a CO2 laser ranging system are analyzed. Ranging signal and subsystem processing alternatives are identified, and their comprehensive evaluation yields preferred candidate solutions which are analyzed to derive range and range rate error contributions. The performance results are presented in the form of extensive tables and figures which identify the ranging accuracy compromises as a function of the key system design parameters and subsystem performance indexes. The ranging errors obtained are noted to be within the high accuracy requirements of existing NASA/GSFC missions with a proper system design.

Instabilities of geared couplings: Theory and practice

NASA Technical Reports Server (NTRS)

Kirk, R. G.; Mondy, R. E.; Murphy, R. C.

1982-01-01

The use of couplings for high speed turbocompressors or pumps is essential to transmit power from the driver. Typical couplings are either of the lubricated gear or dry diaphragm type design. Gear couplings have been the standard design for many years and recent advances in power and speed requirements have pushed the standard design criteria to the limit. Recent test stand and field data on continuous lube gear type couplings have forced a closer examination of design tolerances and concepts to avoid operational instabilities. Two types of mechanical instabilities are reviewed in this paper: (1) entrapped fluid, and (2) gear mesh instability resulting in spacer throw-out onset. Test stand results of these types of instabilities and other directly related problems are presented together with criteria for proper coupling design to avoid these conditions. An additional test case discussed shows the importance of proper material selection and processing and what can happen to an otherwise good design.

Comprehensive Design Reliability Activities for Aerospace Propulsion Systems

NASA Technical Reports Server (NTRS)

Christenson, R. L.; Whitley, M. R.; Knight, K. C.

2000-01-01

This technical publication describes the methodology, model, software tool, input data, and analysis result that support aerospace design reliability studies. The focus of these activities is on propulsion systems mechanical design reliability. The goal of these activities is to support design from a reliability perspective. Paralleling performance analyses in schedule and method, this requires the proper use of metrics in a validated reliability model useful for design, sensitivity, and trade studies. Design reliability analysis in this view is one of several critical design functions. A design reliability method is detailed and two example analyses are provided-one qualitative and the other quantitative. The use of aerospace and commercial data sources for quantification is discussed and sources listed. A tool that was developed to support both types of analyses is presented. Finally, special topics discussed include the development of design criteria, issues of reliability quantification, quality control, and reliability verification.

30 CFR 90.209 - Respirable dust samples; transmission by operator.

Code of Federal Regulations, 2010 CFR

2010-07-01

... designated by the District Manager. (b) The operator shall not open or tamper with the seal of any filter... properly complete the dust data card that is provided by the manufacturer for each filter cassette. The... include that person's certification number. Respirable dust samples with data cards not properly completed...

30 CFR 90.209 - Respirable dust samples; transmission by operator.

Code of Federal Regulations, 2011 CFR

2011-07-01

... designated by the District Manager. (b) The operator shall not open or tamper with the seal of any filter... properly complete the dust data card that is provided by the manufacturer for each filter cassette. The... include that person's certification number. Respirable dust samples with data cards not properly completed...

30 CFR 71.209 - Respirable dust samples; transmission by operator.

Code of Federal Regulations, 2010 CFR

2010-07-01

... designated by the District Manager. (b) The operator shall not open or tamper with the seal of any filter... properly complete the dust data card that is provided by the manufacturer for each filter cassette. The... include that person's certification number. Respirable dust samples with data cards not properly completed...

30 CFR 71.209 - Respirable dust samples; transmission by operator.

Code of Federal Regulations, 2011 CFR

2011-07-01

... designated by the District Manager. (b) The operator shall not open or tamper with the seal of any filter... properly complete the dust data card that is provided by the manufacturer for each filter cassette. The... include that person's certification number. Respirable dust samples with data cards not properly completed...

14 CFR 27.733 - Tires.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Tires. 27.733 Section 27.733 Aeronautics... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Landing Gear § 27.733 Tires. (a) Each landing gear wheel must have a tire— (1) That is a proper fit on the rim of the wheel; and (2) Of the proper...

Causes of Indoor Air Quality Problems in Schools: Summary of Scientific Research. Revised Edition.

ERIC Educational Resources Information Center

Bayer, Charlene W.; Crow, Sidney A.; Fischer, John

Understanding the primary causes of indoor air quality (IAQ) problems and how controllable factors--proper heating, ventilation and air-conditioning (HVAC) system design, allocation of adequate outdoor air, proper filtration, effective humidity control, and routine maintenance--can avert problems may help all building owners, operators, and…

Construction Trade Course. Bilingual Vocational Instructional Materials.

ERIC Educational Resources Information Center

Lopez-Cox, Guadalupe

This building trades course, one of a series of bilingual English-Spanish vocational education courses, is designed to introduce the basic skills that a student must know in the construction field. It is geared to teach the student basic manipulative skills, safety judgments, proper work habits, desirable attitudes, and proper behavior for initial…

Optimization methods applied to hybrid vehicle design

NASA Technical Reports Server (NTRS)

Donoghue, J. F.; Burghart, J. H.

1983-01-01

The use of optimization methods as an effective design tool in the design of hybrid vehicle propulsion systems is demonstrated. Optimization techniques were used to select values for three design parameters (battery weight, heat engine power rating and power split between the two on-board energy sources) such that various measures of vehicle performance (acquisition cost, life cycle cost and petroleum consumption) were optimized. The apporach produced designs which were often significant improvements over hybrid designs already reported on in the literature. The principal conclusions are as follows. First, it was found that the strategy used to split the required power between the two on-board energy sources can have a significant effect on life cycle cost and petroleum consumption. Second, the optimization program should be constructed so that performance measures and design variables can be easily changed. Third, the vehicle simulation program has a significant effect on the computer run time of the overall optimization program; run time can be significantly reduced by proper design of the types of trips the vehicle takes in a one year period. Fourth, care must be taken in designing the cost and constraint expressions which are used in the optimization so that they are relatively smooth functions of the design variables. Fifth, proper handling of constraints on battery weight and heat engine rating, variables which must be large enough to meet power demands, is particularly important for the success of an optimization study. Finally, the principal conclusion is that optimization methods provide a practical tool for carrying out the design of a hybrid vehicle propulsion system.

Instructor/Operator Station Design Study.

DTIC Science & Technology

1982-04-01

components interact and are dependent one upon the other. A major issue in any design involving both hardware and software is establishing the proper...always begins at leg 1. The AUTOMATED TRAINING EXER- CISE MAP display calls up a map of the gaming area for the selected exer- cise. The PRINTOUT...select the size of the gaming area in nautical miles. When the Aircraft comes within 100 miles of an in-tune station, the approach display for the in

On the proper study design applicable to experimental balneology.

PubMed

Varga, Csaba

2016-08-01

The simple message of this paper is that it is the high time to reevaluate the strategies and optimize the efforts for investigation of thermal (spa) waters. Several articles trying to clear mode of action of medicinal waters have been published up to now. Almost all studies apply the unproven hypothesis, namely the inorganic ingredients are in close connection with healing effects of bathing. Change of paradigm would be highly necessary in this field taking into consideration the presence of several biologically active organic substances in these waters. A successful design for experimental mechanistic studies is approved.

QuantifyMe: An Open-Source Automated Single-Case Experimental Design Platform.

PubMed

Taylor, Sara; Sano, Akane; Ferguson, Craig; Mohan, Akshay; Picard, Rosalind W

2018-04-05

Smartphones and wearable sensors have enabled unprecedented data collection, with many products now providing feedback to users about recommended step counts or sleep durations. However, these recommendations do not provide personalized insights that have been shown to be best suited for a specific individual. A scientific way to find individualized recommendations and causal links is to conduct experiments using single-case experimental design; however, properly designed single-case experiments are not easy to conduct on oneself. We designed, developed, and evaluated a novel platform, QuantifyMe, for novice self-experimenters to conduct proper-methodology single-case self-experiments in an automated and scientific manner using their smartphones. We provide software for the platform that we used (available for free on GitHub), which provides the methodological elements to run many kinds of customized studies. In this work, we evaluate its use with four different kinds of personalized investigations, examining how variables such as sleep duration and regularity, activity, and leisure time affect personal happiness, stress, productivity, and sleep efficiency. We conducted a six-week pilot study ( N = 13) to evaluate QuantifyMe. We describe the lessons learned developing the platform and recommendations for its improvement, as well as its potential for enabling personalized insights to be scientifically evaluated in many individuals, reducing the high administrative cost for advancing human health and wellbeing.

QuantifyMe: An Open-Source Automated Single-Case Experimental Design Platform †

PubMed Central

Sano, Akane; Ferguson, Craig; Mohan, Akshay; Picard, Rosalind W.

2018-01-01

Smartphones and wearable sensors have enabled unprecedented data collection, with many products now providing feedback to users about recommended step counts or sleep durations. However, these recommendations do not provide personalized insights that have been shown to be best suited for a specific individual. A scientific way to find individualized recommendations and causal links is to conduct experiments using single-case experimental design; however, properly designed single-case experiments are not easy to conduct on oneself. We designed, developed, and evaluated a novel platform, QuantifyMe, for novice self-experimenters to conduct proper-methodology single-case self-experiments in an automated and scientific manner using their smartphones. We provide software for the platform that we used (available for free on GitHub), which provides the methodological elements to run many kinds of customized studies. In this work, we evaluate its use with four different kinds of personalized investigations, examining how variables such as sleep duration and regularity, activity, and leisure time affect personal happiness, stress, productivity, and sleep efficiency. We conducted a six-week pilot study (N = 13) to evaluate QuantifyMe. We describe the lessons learned developing the platform and recommendations for its improvement, as well as its potential for enabling personalized insights to be scientifically evaluated in many individuals, reducing the high administrative cost for advancing human health and wellbeing. PMID:29621133

Texas flexible pavements overlays : review and analysis of existing databases.

DOT National Transportation Integrated Search

2011-12-01

Proper calibration of pavement design and rehabilitation performance models to : conditions in Texas is essential for cost-effective flexible pavement design. The degree of : excellence with which TxDOTs pavement design models is calibrated will d...

Conceptual design of a laser fusion power plant. Part I. An integrated facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This study is a new preliminary conceptual design and economic analysis of an inertial confinement fusion (ICF) power plant performed by Bechtel under the direction of Lawrence Livermore National Laboratory (LLNL). The purpose of a new conceptual design is to examine alternatives to the LLNL HYLIFE power plant and to incorporate information from the recent liquid metal cooled power plant conceptual design study (CDS) into the reactor system and balance of plant design. A key issue in the design of a laser fusion power plant is the degree of symmetry in the illumination of the target that will be requiredmore » for a proper burn. Because this matter is expected to remain unresolved for some time, another purpose of this study is to determine the effect of symmetry requirements on the total plant size, layout, and cost.« less

Multiple spacecraft configuration designs for coordinated flight missions

NASA Astrophysics Data System (ADS)

Fumenti, Federico; Theil, Stephan

2018-06-01

Coordinated flight allows the replacement of a single monolithic spacecraft with multiple smaller ones, based on the principle of distributed systems. According to the mission objectives and to ensure a safe relative motion, constraints on the relative distances need to be satisfied. Initially, differential perturbations are limited by proper orbit design. Then, the induced differential drifts can be properly handled through corrective maneuvers. In this work, several designs are surveyed, defining the initial configuration of a group of spacecraft while counteracting the differential perturbations. For each of the investigated designs, focus is placed upon the number of deployable spacecraft and on the possibility to ensure safe relative motion through station keeping of the initial configuration, with particular attention to the required Δ V budget and the constraints violations.

Metformin and the Risk of Cancer

PubMed Central

Suissa, Samy; Azoulay, Laurent

2012-01-01

OBJECTIVE Time-related biases in observational studies of drug effects have been described extensively in different therapeutic areas but less so in diabetes. Immortal time bias, time-window bias, and time-lag bias all tend to greatly exaggerate the benefits observed with a drug. RESEARCH DESIGN AND METHODS These time-related biases are described and shown to be prominent in observational studies that have associated metformin with impressive reductions in the incidence of and mortality from cancer. As a consequence, metformin received much attention as a potential anticancer agent; these observational studies sparked the conduction of randomized, controlled trials of metformin as cancer treatment. However, the spectacular effects reported in these studies are compatible with time-related biases. RESULTS We found that 13 observational studies suffered from immortal time bias; 9 studies had not considered time-window bias, whereas other studies did not consider inherent time-lagging issues when comparing the first-line treatment metformin with second- or third-line treatments. These studies, subject to time-related biases that are avoidable with proper study design and data analysis, led to illusory extraordinarily significant effects, with reductions in cancer risk with metformin ranging from 20 to 94%. Three studies that avoided these biases reported no effect of metformin use on cancer incidence. CONCLUSIONS Although observational studies are important to better understand the effects of drugs, their proper design and analysis is essential to avoid major time-related biases. With respect to metformin, the scientific evidence of its potential beneficial effects on cancer would need to be reassessed critically before embarking on further long and expensive trials. PMID:23173135

Peer Assessments of GPW: Infusing Fairness into Students' Assessments of Peer Contributions

ERIC Educational Resources Information Center

Onyia, Okey Peter; Allen, Stephanie

2012-01-01

This paper contains results of an empirical study that tested the efficacy and acceptability of two templates designed to fully involve students in proper and fair peer-assessments of their group project work (GPW) by providing concrete evidence of independent progressive documentation of their peers' contributions to the work-process and…

Estimation of the Prevalence of Autism Spectrum Disorder in South Korea, Revisited

ERIC Educational Resources Information Center

Pantelis, Peter C.; Kennedy, Daniel P.

2016-01-01

Two-phase designs in epidemiological studies of autism prevalence introduce methodological complications that can severely limit the precision of resulting estimates. If the assumptions used to derive the prevalence estimate are invalid or if the uncertainty surrounding these assumptions is not properly accounted for in the statistical inference…

Microbial community and chemical characteristics of swine manure during maturation

USDA-ARS?s Scientific Manuscript database

Standardizing diet formulation studies that are designed to lower emission is needed for properly evaluating the impact diets have on emissions. Three groups of 12 pigs (84 kg initial BW) were feed a standard corn-soybean mean diet over a 13 wk period to determine how the length of manure storage af...

75 FR 62536 - Notice of Public Information Collection(s) Being Reviewed by the Federal Communications...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-12

... information is necessary for the proper performance of the functions of the Commission, including whether the...: N/A. Privacy Act Impact Assessment: N/A. Nature and Extent of Confidentiality: This collection does... has been designated an eligible telecommunications carrier (ETC), and that services a study area with...

Operation and Maintenance of Wastewater Collection Systems. Volume I. Third Edition. A Field Study Training Program.

ERIC Educational Resources Information Center

California State Univ., Sacramento. Dept. of Civil Engineering.

Proper installations, inspections, operations, maintenance and repairs of wastewater collection, conveyance and treatment facilities have a significant impact on the operation and maintenance costs, and the effectiveness of these facilities. This manual is the first volume of a two-part program designed to provide wastewater collection system…

FACILITIES FOR EDUCATION IN VA HOSPITALS. FINAL REPORT.

ERIC Educational Resources Information Center

GREEN, ALAN C.; AND OTHERS

THIS STUDY WAS AUTHORIZED BY THE VA DEPARTMENT OF MEDICINE AND SURGERY FOR THE PURPOSE OF IDENTIFYING AND DETERMINING THE FACILITIES NEEDED TO PROPERLY HOUSE AND SUPPORT EDUCATION ACTIVITIES IN EXISTING AND FUTURE VA HOSPITALS AND TO PRODUCE ARCHITECTURAL GUIDANCE IN THE DESIGN OF THE FACILITIES. CURRENT PRACTICES AND SIGNIFICANT TRENDS IN MEDICAL…

Research on orbit prediction for solar-based calibration proper satellite

NASA Astrophysics Data System (ADS)

Chen, Xuan; Qi, Wenwen; Xu, Peng

2018-03-01

Utilizing the mathematical model of the orbit mechanics, the orbit prediction is to forecast the space target's orbit information of a certain time based on the orbit of the initial moment. The proper satellite radiometric calibration and calibration orbit prediction process are introduced briefly. On the basis of the research of the calibration space position design method and the radiative transfer model, an orbit prediction method for proper satellite radiometric calibration is proposed to select the appropriate calibration arc for the remote sensor and to predict the orbit information of the proper satellite and the remote sensor. By analyzing the orbit constraint of the proper satellite calibration, the GF-1solar synchronous orbit is chose as the proper satellite orbit in order to simulate the calibration visible durance for different satellites to be calibrated. The results of simulation and analysis provide the basis for the improvement of the radiometric calibration accuracy of the satellite remote sensor, which lays the foundation for the high precision and high frequency radiometric calibration.

The Essentials of Proper Wine Service.

ERIC Educational Resources Information Center

Manago, Gary H.

This instructional unit was designed to assist the food services instructor and/or the restaurant manager in training students and/or staff in the proper procedure for serving wines to guests. The lesson plans included in this unit focus on: (1) the different types of wine glasses and their uses; (2) the parts of a wine glass; (3) the proper…

Designing a Competency-Based New County Extension Personnel Training Program: A Novel Approach

ERIC Educational Resources Information Center

Brodeur, Cheri Winton; Higgins, Cynthia; Galindo-Gonzalez, Sebastian; Craig, Diane D.; Haile, Tyann

2011-01-01

Voluntary county personnel turnover occurs for a multitude of reasons, including the lack of job satisfaction, organizational commitment, and job embeddedness and lack of proper training. Loss of personnel can be costly both economically and in terms of human capital. Retention of Extension professionals can be improved through proper training or…

Proposed Models of Appropriate Website and Courseware for E-Learning in Higher Education: Research Based Design Models

ERIC Educational Resources Information Center

Khlaisang, Jintavee

2010-01-01

The purpose of this study was to investigate proper website and courseware for e-learning in higher education. Methods used in this study included the data collection, the analysis surveys, the experts' in-depth interview, and the experts' focus group. Results indicated that there were 16 components for website, as well as 16 components for…

Feeling-of-knowing for proper names.

PubMed

Izaute, Marie; Chambres, Patrick; Larochelle, Serge

2002-12-01

The main objective of the presented study was to study feeling-of-knowing (FOK) in proper name retrieval. Many studies show that FOK can predict performance on a subsequent criterion test. Although feeling-of-knowing studies involve questions about proper names, none make this distinction between proper names and common names. Nevertheless, the specific character of proper names as a unique label referring to a person should allow participants to target precisely the desired verbal label. Our idea here was that the unique character of proper name information should result in more accurate FOK evaluations. In the experiment, participants evaluated feeling-of-knowing for proper and common name descriptions. The study demonstrates that FOK judgments are more accurate for proper names than for common names. The implications of the findings for proper names are briefly discussed in terms of feeling-of-knowing hypotheses.

JASMINE project Instrument design and centroiding experiment

NASA Astrophysics Data System (ADS)

Yano, Taihei; Gouda, Naoteru; Kobayashi, Yukiyasu; Yamada, Yoshiyuki

JASMINE will study the fundamental structure and evolution of the Milky Way Galaxy. To accomplish these objectives, JASMINE will measure trigonometric parallaxes, positions and proper motions of about 10 million stars with a precision of 10 μarcsec at z = 14 mag. In this paper the instrument design (optics, detectors, etc.) of JASMINE is presented. We also show a CCD centroiding experiment for estimating positions of star images. The experimental result shows that the accuracy of estimated distances has a variance of less than 0.01 pixel.

Turbofan engine control system design using the LQG/LTR methodology

NASA Technical Reports Server (NTRS)

Garg, Sanjay

1989-01-01

Application of the linear-quadratic-Gaussian with loop-transfer-recovery methodology to design of a control system for a simplified turbofan engine model is considered. The importance of properly scaling the plant to achieve the desired target feedback loop is emphasized. The steps involved in the application of the methodology are discussed via an example, and evaluation results are presented for a reduced-order compensator. The effect of scaling the plant on the stability robustness evaluation of the closed-loop system is studied in detail.

Turbofan engine control system design using the LQG/LTR methodology

NASA Technical Reports Server (NTRS)

Garg, Sanjay

1989-01-01

Application of the Linear-Quadratic-Gaussian with Loop-Transfer-Recovery methodology to design of a control system for a simplified turbofan engine model is considered. The importance of properly scaling the plant to achieve the desired Target-Feedback-Loop is emphasized. The steps involved in the application of the methodology are discussed via an example, and evaluation results are presented for a reduced-order compensator. The effect of scaling the plant on the stability robustness evaluation of the closed-loop system is studied in detail.

In use performance of catalytic converters on properly maintained high mileage vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sabourin, M.A.; Larson, R.E.; Donahue, K.S.

1986-01-01

A test program to evaluate the performance of catalytic converters from fifty-six 1981 and 1982 model year high mileage properly maintained in-use vehicles (from 21 engine families) was performed by the Certification Division of the Office of Mobile Sources (EPA). The program is called the Catalyst Change Program. All program vehicles were screened for proper maintenance and for mileages that ranged from 35,000 to 60,000 miles. Among vehicles belonging to 21 high sales volume and high technology engine and emission control system designs tested, poor catalyst performance was determined to be a significant contributor to emissions failure of properly-maintained vehiclesmore » at or near their warranted useful life mileage.« less

Technique for controlling spread of limnotic oncomelania

NASA Astrophysics Data System (ADS)

Li, Damei; Wang, Xiangsan; Lai, Yonggen

2003-09-01

Schistosomiasis is a parasitic disease mostly found in areas along the Changjiang River of China. The disease is spread solely through an intermediary named oncomelania, so its spread of schistosomiasis can be controlled by properly designing water intakes which prevent oncomelania from entering farming land or residential areas. This paper reports a successful design process and a new oncomelania-free intake device. The design of the new intake is based on a sound research program in which extensive experimental studies were carried out to gain knowledge of oncomelania eco-hydraulic behavior and detailed flow field information through CFD simulation.

Quantum logic gates based on coherent electron transport in quantum wires.

PubMed

Bertoni, A; Bordone, P; Brunetti, R; Jacoboni, C; Reggiani, S

2000-06-19

It is shown that the universal set of quantum logic gates can be realized using solid-state quantum bits based on coherent electron transport in quantum wires. The elementary quantum bits are realized with a proper design of two quantum wires coupled through a potential barrier. Numerical simulations show that (a) a proper design of the coupling barrier allows one to realize any one-qbit rotation and (b) Coulomb interaction between two qbits of this kind allows the implementation of the CNOT gate. These systems are based on a mature technology and seem to be integrable with conventional electronics.

Helmet Fit and Cervical Spine Motion in Collegiate Men's Lacrosse Athletes Secured to a Spine Board

PubMed Central

Petschauer, Meredith A.; Schmitz, Randy; Gill, Diane L.

2010-01-01

Abstract Context: Proper management of cervical spine injuries in men's lacrosse players depends in part upon the ability of the helmet to immobilize the head. Objective: To determine if properly and improperly fitted lacrosse helmets provide adequate stabilization of the head in the spine-boarded athlete. Design: Crossover study. Setting: Sports medicine research laboratory. Patients or Other Participants: Eighteen healthy collegiate men's lacrosse players. Intervention(s): Participants were asked to move their heads through 3 planes of motion after being secured to a spine board under 3 helmet conditions. Main Outcome Measure(s): Change in range of motion in the cervical spine was calculated for the sagittal, frontal, and transverse planes for both head-to-thorax and helmet-to-thorax range of motion in all 3 helmet conditions (properly fitted, improperly fitted, and no helmet). Results: Head-to-thorax range of motion with the properly fitted and improperly fitted helmets was greater than in the no-helmet condition (P < .0001). In the sagittal plane, range of motion was greater with the improperly fitted helmet than with the properly fitted helmet. No difference was observed in helmet-to-thorax range of motion between properly and improperly fitted helmet conditions. Head-to-thorax range of motion was greater than helmet-to-thorax range of motion in all 3 planes (P < .0001). Conclusions: Cervical spine motion was minimized the most in the no-helmet condition, indicating that in lacrosse players, unlike football players, the helmet may need to be removed before stabilization. PMID:20446833

Access to properly fitting personal protective equipment for female construction workers.

PubMed

Onyebeke, Lynn C; Papazaharias, Demetrios M; Freund, Alice; Dropkin, Jonathan; McCann, Michael; Sanchez, Sadie H; Hashim, Dana; Meyer, John D; Lucchini, Roberto G; Zuckerman, Norman C

2016-11-01

Previous literature suggests that most personal protective equipment (PPE) for construction is designed for males and does not accommodate female anthropometry. We conducted a pilot study to identify whether female construction workers currently have adequate access to properly fitting PPE. Semi-structured focus group interviews were conducted with union female carpenters, laborers, and ironworkers. Researchers coded focus group transcriptions and extracted major themes using thematic framework analysis. Participants (n = 23) had a mean of 15.1 years of construction experience (range 3-34.5 years). A majority reported fit problems for many types of PPE (gloves, harnesses, safety vests, work boots, outerwear), generally noting that the equipment provided by contractors was too large. Other emergent themes included female workers purchasing their own PPE, exposure to various safety hazards from poorly fitted PPE, and perceived indifferent safety culture. Female construction workers continue to have difficulty accessing properly fitting PPE. Am. J. Ind. Med. 59:1032-1040, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Optimum bus headway for preemption : a simulation approach

DOT National Transportation Integrated Search

1997-01-01

Preemption techniques are designed to provide preferential treatment for buses at signalized intersections. A preemption strategy, if properly designed, can provide continuous green phases for buses at successive intersections, thereby reducing trave...

Organizing a breast cancer database: data management.

PubMed

Yi, Min; Hunt, Kelly K

2016-06-01

Developing and organizing a breast cancer database can provide data and serve as valuable research tools for those interested in the etiology, diagnosis, and treatment of cancer. Depending on the research setting, the quality of the data can be a major issue. Assuring that the data collection process does not contribute inaccuracies can help to assure the overall quality of subsequent analyses. Data management is work that involves the planning, development, implementation, and administration of systems for the acquisition, storage, and retrieval of data while protecting it by implementing high security levels. A properly designed database provides you with access to up-to-date, accurate information. Database design is an important component of application design. If you take the time to design your databases properly, you'll be rewarded with a solid application foundation on which you can build the rest of your application.

Purkinje Cell Activity in the Cerebellar Anterior Lobe after Rabbit Eyeblink Conditioning

ERIC Educational Resources Information Center

Green, John T.; Steinmetz, Joseph E.

2005-01-01

The cerebellar anterior lobe may play a critical role in the execution and proper timing of learned responses. The current study was designed to monitor Purkinje cell activity in the rabbit cerebellar anterior lobe after eyeblink conditioning, and to assess whether Purkinje cells in recording locations may project to the interpositus nucleus.…

Lighting for Schools.

ERIC Educational Resources Information Center

Benya, James R.

This publication highlights some of the benefits of proper daylighting design in educational facilities, discusses energy efficient electric lighting choices schools can make that are long lasting and require little maintenance, and offers six steps for designing lighting systems that use half the energy of earlier conventional designs. Several…

Evaluation of hot mix asphalt moisture sensitivity using the Nottingham Asphalt test equipment : final report, March 2010.

DOT National Transportation Integrated Search

2010-03-01

Pavements are subjected to different stresses during their design lives. A properly designed pavement will perform adequately during its : design life, and the distresses will not exceed the allowable limits; however, there are several factures that ...

Recreating Liberal Education: Student-Designed Programming after a Decade.

ERIC Educational Resources Information Center

Smith, Mark; Clarke, John

1980-01-01

Though student-designed programs have been justified by references to humanism, systems theory, and romantic idealism, a more secure foundation lies in developmental theory. When properly advised, it is suggested, student-designed programs resemble the most desirable processes of liberal education. (Author/MLW)

46 CFR 58.30-5 - Design requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Design requirements. 58.30-5 Section 58.30-5 Shipping... AND RELATED SYSTEMS Fluid Power and Control Systems § 58.30-5 Design requirements. (a) The.... (b) The system shall be so designed that proper functioning of any unit shall not be affected by the...

46 CFR 58.30-5 - Design requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 2 2011-10-01 2011-10-01 false Design requirements. 58.30-5 Section 58.30-5 Shipping... AND RELATED SYSTEMS Fluid Power and Control Systems § 58.30-5 Design requirements. (a) The.... (b) The system shall be so designed that proper functioning of any unit shall not be affected by the...

7 CFR Exhibit B to Subpart C of... - Site Development Design Requirements

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Site Development Design Requirements B Exhibit B to... Work Pt. 1924, Subpt. C, Exh. B Exhibit B to Subpart C of Part 1924—Site Development Design... burdens and conditions unsuitable for healthy and pleasant living. Proper site design can preserve...

7 CFR Exhibit B to Subpart C of... - Site Development Design Requirements

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 12 2013-01-01 2013-01-01 false Site Development Design Requirements B Exhibit B to... Work Pt. 1924, Subpt. C, Exh. B Exhibit B to Subpart C of Part 1924—Site Development Design... burdens and conditions unsuitable for healthy and pleasant living. Proper site design can preserve...

7 CFR Exhibit B to Subpart C of... - Site Development Design Requirements

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 12 2012-01-01 2012-01-01 false Site Development Design Requirements B Exhibit B to... Work Pt. 1924, Subpt. C, Exh. B Exhibit B to Subpart C of Part 1924—Site Development Design... burdens and conditions unsuitable for healthy and pleasant living. Proper site design can preserve...

7 CFR Exhibit B to Subpart C of... - Site Development Design Requirements

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 12 2011-01-01 2011-01-01 false Site Development Design Requirements B Exhibit B to... Work Pt. 1924, Subpt. C, Exh. B Exhibit B to Subpart C of Part 1924—Site Development Design... burdens and conditions unsuitable for healthy and pleasant living. Proper site design can preserve...

7 CFR Exhibit B to Subpart C of... - Site Development Design Requirements

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 12 2014-01-01 2013-01-01 true Site Development Design Requirements B Exhibit B to... Work Pt. 1924, Subpt. C, Exh. B Exhibit B to Subpart C of Part 1924—Site Development Design... burdens and conditions unsuitable for healthy and pleasant living. Proper site design can preserve...

Design for Review - Applying Lessons Learned to Improve the FPGA Review Process

NASA Technical Reports Server (NTRS)

Figueiredo, Marco A.; Li, Kenneth E.

2014-01-01

Flight Field Programmable Gate Array (FPGA) designs are required to be independently reviewed. This paper provides recommendations to Flight FPGA designers to properly prepare their designs for review in order to facilitate the review process, and reduce the impact of the review time in the overall project schedule.

Considerations for the Optimal Design of a Two-Way Interactive Distance Education Classroom.

ERIC Educational Resources Information Center

Gregg, Joe; Persichitte, Kay

To make effective use of a two-way interactive distance education system, classroom design should be a primary consideration. A properly designed classroom will enhance content objectives and increase acceptance of this type of instructional delivery. This paper describes key considerations for optimal design. Construction considerations include…

Ares Upper Stage Processes to Implement Model Based Design - Going Paperless

NASA Technical Reports Server (NTRS)

Gregory, Melanie

2012-01-01

Computer-Aided Design (CAD) has all but replaced the drafting board for design work. Increased productivity and accuracy should be natural outcomes of using CAD. Going from paper drawings only to paper drawings based on CAD models to CAD models and no drawings, or Model Based Design (MBD), is a natural progression in today?s world. There are many advantages to MBD over traditional design methods. To make the most of those advantages, standards should be in place and the proper foundation should be laid prior to transitioning to MBD. However, without a full understanding of the implications of MBD and the proper control of the data, the advantages are greatly diminished. Transitioning from a paper design world to an electronic design world means re-thinking how information gets controlled at its origin and distributed from one point to another. It means design methodology is critical, especially for large projects. It means preparation of standardized parts and processes as well as strong communication between all parties in order to maximize the benefits of MBD.

Designing and assessing fixed dental prostheses 2 multimedia-based education in dentistry students.

PubMed

Jahandideh, Yousef; Roohi Balasi, Leila; Vadiati Saberi, Bardia; Dadgaran, Ideh

2016-01-01

Background: Above all methods effective learning results from decent training, acquired in the proper environment and encouraging creative methods. Computer-assisted training by educational software is considered a fundamental measure to improve medical and dentistry education systems. This study aims to design and assess fixed dental prostheses via 2 multimedia instructional contents at the Guilan dentistry school. Methods: This is a descriptive and cross-sectional study. First off, the instructional content was analyzed. The software used to produce multimedia was the iSpring suite Ver.7.0. After designing the instructional multimedia, this software was loaded by LMS. Sixty-nine dentistry students in the 5th semester at Guilan Dentistry School were selected via convenience sampling. At the end of the course, a structured questionnaire containing 26 items were handed to the students to evaluate the instructional multimedia quality. Results: Mean ±SD age was 24.68±3.24 years, 43 were women (62.4%) and 26 were men (37.6%) -the majority of 76.8% used the internet at home. A portion of 33.3% were inclined to use multimedia and the internet with in-person training. About 60% declared that multimedia quality as being good. Conclusion: the instructional multimedia designs which are compatible with lesson objectives and audiovisual facilities can have a great effect on the student's satisfaction. Preparing instructional multimedia makes the instructional content easily accessible for students to be able to review it several times at the proper opportunity and if presented through LMS they would be able to study the lesson subject wherever and whenever accessing the internet.

Manufacturing and Cost Considerations in Multidisciplinary Aircraft Design (Research on Mathematical Modeling of Manufacturability Factors)

NASA Technical Reports Server (NTRS)

Rais-Rohani, Masoud

1996-01-01

The identification of airframe Manufacturability Factors/Cost Drivers (MFCD) and the method by which the relationships between MFCD and designer-controlled parameters could be properly modeled are described.

Appropriate and inappropriate methods for investigating the "gateway" hypothesis, with a review of the evidence linking prior snus use to later cigarette smoking.

PubMed

Lee, Peter N

2015-03-20

The "gateway hypothesis" usually refers to the possibility that the taking up of habit A, which is considered harmless (or less harmful), may lead to the subsequent taking up of another habit, B, which is considered harmful (or more harmful). Possible approaches to designing and analysing studies to test the hypothesis are discussed. Evidence relating to the use of snus (A) as a gateway for smoking (B) is then evaluated in detail. The importance of having appropriate data available on the sequence of use of A and B and on other potential confounding factors that may lead to the taking up of B is emphasised. Where randomised trials are impractical, the preferred designs include the prospective cohort study in which ever use of A and of B is recorded at regular intervals, and the cross-sectional survey in which time of starting to use A and B is recorded. Both approaches allow time-stratified analytical methods to be used, in which, in each time period, risk of initiating B among never users of B at the start of the interval is compared according to prior use of A. Adjustment in analysis for the potential confounding factors is essential. Of 11 studies of possible relevance conducted in Sweden, Finland or Norway, only one seriously addresses potential confounding by those other factors involved in the initiation of smoking. Furthermore, 5 of the 11 studies are of a design that does not allow proper testing of the gateway hypothesis for various reasons, and the analysis is unsatisfactory, sometimes seriously, in all the remaining six. While better analyses could be attempted for some of the six studies identified as having appropriate design, the issues of confounding remain, and more studies are clearly needed. To obtain a rapid answer, a properly designed cross-sectional survey is recommended.

Investigating the key factors in designing a communication skills program for medical students: A qualitative study.

PubMed

Mahdi Hazavehei, Seyyed M; Karimi Moonaghi, Hossein; Moeini, Babak; Moghimbeigi, Abbas; Emadzadeh, Ali

2015-11-01

Medical students have a serious need to acquire communication skills with others. In many medical schools, special curriculums are developed to improve such skills. Effective training of communication skills requires expert curriculum design. The aim of this study was to explore the experiences and views of experts and stakeholders in order to design a suitable training program in communication skills for medical students. The content analysis approach was used in this qualitative study. Forty-three participants were selected from the faculty, nurses, physicians, residents, and medical students at Mashhad University of Medical Sciences using purposive sampling. The data were collected through focus group discussions and semi-structured interviews. To ensure the accuracy of the data, the criteria of credibility, transferability, dependability, and conformability were met. The data were analyzed by MAXQDA software using the Graneheim & Lundman model. The findings of this study consisted of two main themes, i.e., "The vast nature of the present communication skills training" and "administrative requirements of the training program regarding communication skills." The first theme included the educational needs of students, the problems associated with training people to have good communication skills, the importance of good communication skills in performing professional duties, communication skills and job requirements, the learning environment of communication skills, and the status of existing training programs for communication skills. Strategies and suitable methods for teaching communication skills and methods of evaluating the students in this regard also were obtained. The findings of this study were the elements required to design a proper and local model to teach communication skills to medical students through analyzing the concepts of effective communication. The results of this study can be useful for medical faculties in designing a proper program for teaching medical students how to communicate effectively with patients and colleagues.

Investigating the key factors in designing a communication skills program for medical students: A qualitative study

PubMed Central

Mahdi Hazavehei, Seyyed M.; Moonaghi, Hossein Karimi; Moeini, Babak; Moghimbeigi, Abbas; Emadzadeh, Ali

2015-01-01

Introduction Medical students have a serious need to acquire communication skills with others. In many medical schools, special curriculums are developed to improve such skills. Effective training of communication skills requires expert curriculum design. The aim of this study was to explore the experiences and views of experts and stakeholders in order to design a suitable training program in communication skills for medical students. Methods The content analysis approach was used in this qualitative study. Forty-three participants were selected from the faculty, nurses, physicians, residents, and medical students at Mashhad University of Medical Sciences using purposive sampling. The data were collected through focus group discussions and semi-structured interviews. To ensure the accuracy of the data, the criteria of credibility, transferability, dependability, and conformability were met. The data were analyzed by MAXQDA software using the Graneheim & Lundman model. Results The findings of this study consisted of two main themes, i.e., “The vast nature of the present communication skills training” and “administrative requirements of the training program regarding communication skills.” The first theme included the educational needs of students, the problems associated with training people to have good communication skills, the importance of good communication skills in performing professional duties, communication skills and job requirements, the learning environment of communication skills, and the status of existing training programs for communication skills. Strategies and suitable methods for teaching communication skills and methods of evaluating the students in this regard also were obtained. Conclusion The findings of this study were the elements required to design a proper and local model to teach communication skills to medical students through analyzing the concepts of effective communication. The results of this study can be useful for medical faculties in designing a proper program for teaching medical students how to communicate effectively with patients and colleagues. PMID:26767096

The effect of lower body stabilization and different writing tools on writing biomechanics in children with cerebral palsy.

PubMed

Cheng, Hsin-Yi Kathy; Lien, Yueh-Ju; Yu, Yu-Chun; Ju, Yan-Ying; Pei, Yu-Cheng; Cheng, Chih-Hsiu; Wu, David Bin-Chia

2013-04-01

A high percentage of children with cerebral palsy (CP) have difficulty keeping up with the handwriting demands at school. Previous studies have addressed the effects of proper sitting and writing tool on writing performance, but less on body biomechanics. The aim of this study was to investigate the influence of lower body stabilization and pencil design on body biomechanics in children with CP. Fourteen children (12.31±4.13 years old) with CP were recruited for this study. A crossover repeated measures design was employed, with two independent variables: lower body stabilization (with/without) and pencil (regular/assigned grip height/biaxial). The writing task was to trace the Archimedean spiral mazes. Electromyography (EMG) of the upper extremity, the wrist flexion/extension movements, and the whole body photography were recorded to quantify the changes in posture and upper extremity biomechanics. Two-way repeated measures ANOVA was used for statistical analysis. No significant main effects were revealed in the EMG and wrist kinematics. The lower body stabilization significantly decreased the trunk lateral and forward deviations, and the visual focus-vertical angle. The biaxial pencil and the assigned grip height design significantly decreased the head, shoulder, trunk, and pelvic deviations compared with the regular design. The results indicated that the lower body positioning was effective in improving the trunk posture. A pencil with an assigned grip height or with a biaxial design could improve head, shoulder, trunk and pelvic alignment, but did not influence the muscle exertion of the upper extremity. This study could provide guidelines for parents, teachers and clinicians regarding the selection of writing tools and the knowledge of proper positioning for the children with handwriting difficulties. Further analyses can focus on the design, modification and clinical application of assitive sitting and writing devices for the use in children with handwriting difficulties. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Future of Professional Development Will Be Designed, Not Discovered: Response to Moon, Passmore, Reiser, and Michaels, "Beyond Comparisons of Online versus Face-to-Face PD"

ERIC Educational Resources Information Center

Fishman, Barry; Konstantopoulos, Spyros; Kubitskey, Beth W.; Vath, Richard; Park, Gina; Johnson, Heather; Edelson, Daniel

2014-01-01

This article represents a response to the authors' "Journal of Teacher Education" ("JTE") article (Fishman et al., 2013) by Moon, Passmore, Reiser, and Michaels (2013). The authors believe that Moon et al. have properly identified both the value in their study and the importance of moving beyond not only their study, but…

Wing design for a civil tiltrotor transport aircraft

NASA Technical Reports Server (NTRS)

Rais-Rohani, Masoud

1994-01-01

The goal of this research is the proper tailoring of the civil tiltrotor's composite wing-box structure leading to a minimum-weight wing design. With focus on the structural design, the wing's aerodynamic shape and the rotor-pylon system are held fixed. The initial design requirement on drag reduction set the airfoil maximum thickness-to-chord ratio to 18 percent. The airfoil section is the scaled down version of the 23 percent-thick airfoil used in V-22's wing. With the project goal in mind, the research activities began with an investigation of the structural dynamic and aeroelastic characteristics of the tiltrotor configuration, and the identification of proper procedures to analyze and account for these characteristics in the wing design. This investigation led to a collection of more than thirty technical papers on the subject, some of which have been referenced here. The review of literature on the tiltrotor revealed the complexity of the system in terms of wing-rotor-pylon interactions. The aeroelastic instability or whirl flutter stemming from wing-rotor-pylon interactions is found to be the most critical mode of instability demanding careful consideration in the preliminary wing design. The placement of wing fundamental natural frequencies in bending and torsion relative to each other and relative to the rotor 1/rev frequencies is found to have a strong influence on the whirl flutter. The frequency placement guide based on a Bell Helicopter Textron study is used in the formulation of frequency constraints. The analysis and design studies are based on two different finite-element computer codes: (1) MSC/NASATRAN and (2) WIDOWAC. These programs are used in parallel with the motivation to eventually, upon necessary modifications and validation, use the simpler WIDOWAC code in the structural tailoring of the tiltrotor wing. Several test cases were studied for the preliminary comparison of the two codes. The results obtained so far indicate a good overall agreement between the two codes.

Computational Design Tool for Bridge Hydrodynamic Loading in Inundated Flows of Midwest Rivers

DOT National Transportation Integrated Search

2009-12-01

The hydraulic forces experienced by an inundated bridge deck have great importance in the design of bridges. The proper estimation of loading exerted by the flow on the structure is important for design plans and is pertinent for evaluating its vulne...

Study on Design of High Efficiency and Light Weight Composite Propeller Blade for a Regional Turboprop Aircraft

NASA Astrophysics Data System (ADS)

Kong, Changduk; Lee, Kyungsun

2013-03-01

In this study, aerodynamic and structural design of the composite propeller blade for a regional turboprop aircraft is performed. The thin and wide chord propeller blade of high speed turboprop aircraft should have proper strength and stiffness to carry various kinds of loads such as high aerodynamic bending and twisting moments and centrifugal forces. Therefore the skin-spar-foam sandwich structure using high strength and stiffness carbon/epoxy composite materials is used to improve the lightness. A specific design procedure is proposed in this work as follows; firstly the aerodynamic configuration design, which is acceptable for the design requirements, is carried out using the in-house code developed by authors, secondly the structure design loads are determined through the aerodynamic load case analysis, thirdly the spar flange and the skin are preliminarily sized by consideration of major bending moments and shear forces using both the netting rule and the rule of mixture, and finally, the stress analysis is performed to confirm the structural safety and stability using finite element analysis commercial code, MSC. NASTRAN/PATRAN. Furthermore the additional analysis is performed to confirm the structural safety due to bird strike impact on the blade during flight operation using a commercial code, ANSYS. To realize the proposed propeller design, the prototype blades are manufactured by the following procedure; the carbon/epoxy composite fabric prepregs are laid up for skin and spar on a mold using the hand lay-up method and consolidated with a proper temperature and vacuum in the oven. To finalize the structural design, the full-scale static structural test is performed under the simulated aerodynamic loads using 3 point loading method. From the experimental results, it is found that the designed blade has a good structural integrity, and the measured results agree well with the analytical results as well.

Workplace Design

NASA Technical Reports Server (NTRS)

1984-01-01

The Anthropometric Source Book was developed based on Johnson Space Center project of anthropometry, the study of the size, shape and motion characteristics of the human body. Designed primarily for use by NASA, the military services and aerospace contractors, the book was also intended to help non-aerospace engineers, architects, and others engaged in design of clothing, equipment and workplaces. An example of its use by Eastman Kodak Company is the company's application of the data to design efficient, productive and comfortable workplaces for employees in the Rochester, NY processing laboratories. The sourcebook was used to determine such dimensions as leg space, work surface height and thickness, employee reach distances, proper height for computer terminal screen, seat height and knee space.

Selection of a surface tension propellant management system for the Viking 75 Orbiter.

NASA Technical Reports Server (NTRS)

Dowdy, M. W.; Debrock, S. C.

1972-01-01

Discussion of the propellant management system requirements derived for the Viking 75 mission, and review of a series of surface tension propellant management system design concepts. The chosen concept is identified and its mission operation described. The ullage bubble and bulk liquid positioning characteristics are presented, along with propellant dynamic considerations entailed by thrust initiation/termination. Pressurization design considerations, required to assure minimum disturbance to the bulk propellant, are introduced as well as those of the tank ullage vent. Design provisions to assure liquid communication between tank ends are discussed. Results of a preliminary design study are presented, including mechanical testing requirements to assure structural integrity, propellant compatibility, and proper installation.

Application of a territorial-based filtering algorithm in turbomachinery blade design optimization

NASA Astrophysics Data System (ADS)

Bahrami, Salman; Khelghatibana, Maryam; Tribes, Christophe; Yi Lo, Suk; von Fellenberg, Sven; Trépanier, Jean-Yves; Guibault, François

2017-02-01

A territorial-based filtering algorithm (TBFA) is proposed as an integration tool in a multi-level design optimization methodology. The design evaluation burden is split between low- and high-cost levels in order to properly balance the cost and required accuracy in different design stages, based on the characteristics and requirements of the case at hand. TBFA is in charge of connecting those levels by selecting a given number of geometrically different promising solutions from the low-cost level to be evaluated in the high-cost level. Two test case studies, a Francis runner and a transonic fan rotor, have demonstrated the robustness and functionality of TBFA in real industrial optimization problems.

Fusing Horizons -- A Grammatical Design Approach for the Arts and Humanities: Using Rules, Contingency and Hermeneutics in Design Education

ERIC Educational Resources Information Center

Bruton, Dean

2007-01-01

This article argues that grammatical thinking within a framework of phenomenological hermeneutics assists designing and may properly be used as a fundamental teaching approach for an interdisciplinary art and design studio. Furthermore, it argues that the theme of grammatical design awareness could be considered as a generic issue across all…

A Course on Serious Game Design and Development Using an Online Problem-Based Learning Approach

ERIC Educational Resources Information Center

Kapralos, Bill; Fisher, Stephanie; Clarkson, Jessica; van Oostveen, Roland

2015-01-01

Purpose: The purpose of this paper is to describe a novel undergraduate course on serious game design and development that integrates both game and instructional design, thus providing an effective approach to teaching serious game design and development. Very little effort has been dedicated to the teaching of proper serious game design and…

Texas flexible pavements and overlays : year 5 report - complete data documentation.

DOT National Transportation Integrated Search

2017-05-01

Proper calibration and validation of pavement design and performance models to Texas conditions is : essential for cost-effective flexible pavement design, performance predictions, and maintenance/rehab : strategies. The veracity of the calibration o...

Optimization of power and energy densities in supercapacitors

NASA Astrophysics Data System (ADS)

Robinson, David B.

Supercapacitors use nanoporous electrodes to store large amounts of charge on their high surface areas, and use the ions in electrolytes to carry charge into the pores. Their high power density makes them a potentially useful complement to batteries. However, ion transport through long, narrow channels still limits power and efficiency in these devices. Proper design can mitigate this. Current collector geometry must also be considered once this is done. Here, De Levie's model for porous electrodes is applied to quantitatively predict device performance and to propose optimal device designs for given specifications. Effects unique to nanoscale pores are considered, including that pores may not have enough salt to fully charge. Supercapacitors are of value for electric vehicles, portable electronics, and power conditioning in electrical grids with distributed renewable sources, and that value will increase as new device fabrication methods are developed and proper design accommodates those improvements. Example design outlines for vehicle applications are proposed and compared.

The Search for Extension: 7 Steps to Help People Find Research-Based Information on the Internet

ERIC Educational Resources Information Center

Hill, Paul; Rader, Heidi B.; Hino, Jeff

2012-01-01

For Extension's unbiased, research-based content to be found by people searching the Internet, it needs to be organized in a way conducive to the ranking criteria of a search engine. With proper web design and search engine optimization techniques, Extension's content can be found, recognized, and properly indexed by search engines and…

Effects of a Brief but Intensive Remedial Computer Intervention in a Sub-Sample of Kindergartners with Early Literacy Delays

ERIC Educational Resources Information Center

Van der Kooy-Hofland, Verna A. C.; Bus, Adriana G.; Roskos, Kathleen

2012-01-01

Living Letters is an adaptive game designed to promote children's combining of how the proper name sounds with their knowledge of how the name looks. A randomized controlled trial (RCT) was used to experimentally test whether priming for attending to the sound-symbol relationship in the proper name can reduce the risk for developing reading…

Effects of Buckling Knockdown Factor, Internal Pressure and Material on the Design of Stiffened Cylinders

NASA Technical Reports Server (NTRS)

Lovejoy, Andrew E.; Hilburger, Mark W.; Chunchu, Prasad B.

2010-01-01

A design study was conducted to investigate the effect shell buckling knockdown factor (SBKF), internal pressure and aluminum alloy material selection on the structural weight of stiffened cylindrical shells. Two structural optimization codes were used for the design study to determine the optimum minimum-weight design for a series of design cases, and included an in-house developed genetic algorithm (GA) code and PANDA2. Each design case specified a unique set of geometry, material, knockdown factor combinations and loads. The resulting designs were examined and compared to determine the effects of SBKF, internal pressure and material selection on the acreage design weight and controlling failure mode. This design study shows that use of less conservative SBKF values, including internal pressure, and proper selection of material alloy can result in significant weight savings for stiffened cylinders. In particular, buckling-critical cylinders with integrally machined stiffener construction can benefit from the use of thicker plate material that enables taller stiffeners, even when the stiffness, strength and density properties of these materials appear to be inferior.

Analysis and optimization of Love wave liquid sensors.

PubMed

Jakoby, B; Vellekoop, M J

1998-01-01

Love wave sensors are highly sensitive microacoustic devices, which are well suited for liquid sensing applications thanks to the shear polarization of the wave. The sensing mechanism thereby relies on the mechanical (or acoustic) interaction of the device with the liquid. The successful utilization of Love wave devices for this purpose requires proper shielding to avoid unwanted electric interaction of the liquid with the wave and the transducers. In this work we describe the effects of this electric interaction and the proper design of a shield to prevent it. We present analysis methods, which illustrate the impact of the interaction and which help to obtain an optimized design of the proposed shield. We also present experimental results for devices that have been fabricated according to these design rules.

Project Management Approaches for Online Learning Design

ERIC Educational Resources Information Center

Eby, Gulsun; Yuzer, T. Volkan

2013-01-01

Developments in online learning and its design are areas that continue to grow in order to enhance students' learning environments and experiences. However, in the implementation of new technologies, the importance of properly and fairly overseeing these courses is often undervalued. "Project Management Approaches for Online Learning Design"…

29 CFR 1926.703 - Requirements for cast-in-place concrete.

Code of Federal Regulations, 2013 CFR

2013-07-01

... members have been designed for such loading. (8) Whenever single post shores are used one on top of... been properly tested with an appropriate ASTM standard test method designed to indicate the concrete...) Formwork shall be designed, fabricated, erected, supported, braced and maintained so that it will be...

29 CFR 1926.703 - Requirements for cast-in-place concrete.

Code of Federal Regulations, 2011 CFR

2011-07-01

... members have been designed for such loading. (8) Whenever single post shores are used one on top of... been properly tested with an appropriate ASTM standard test method designed to indicate the concrete...) Formwork shall be designed, fabricated, erected, supported, braced and maintained so that it will be...

29 CFR 1926.703 - Requirements for cast-in-place concrete.

Code of Federal Regulations, 2014 CFR

2014-07-01

... members have been designed for such loading. (8) Whenever single post shores are used one on top of... been properly tested with an appropriate ASTM standard test method designed to indicate the concrete...) Formwork shall be designed, fabricated, erected, supported, braced and maintained so that it will be...

29 CFR 1926.703 - Requirements for cast-in-place concrete.

Code of Federal Regulations, 2012 CFR

2012-07-01

... members have been designed for such loading. (8) Whenever single post shores are used one on top of... been properly tested with an appropriate ASTM standard test method designed to indicate the concrete...) Formwork shall be designed, fabricated, erected, supported, braced and maintained so that it will be...

29 CFR 1926.703 - Requirements for cast-in-place concrete.

Code of Federal Regulations, 2010 CFR

2010-07-01

... members have been designed for such loading. (8) Whenever single post shores are used one on top of... been properly tested with an appropriate ASTM standard test method designed to indicate the concrete...) Formwork shall be designed, fabricated, erected, supported, braced and maintained so that it will be...

Design, construction, and evaluation of a 1:8 scale model binaural manikin.

PubMed

Robinson, Philip; Xiang, Ning

2013-03-01

Many experiments in architectural acoustics require presenting listeners with simulations of different rooms to compare. Acoustic scale modeling is a feasible means to create accurate simulations of many rooms at reasonable cost. A critical component in a scale model room simulation is a receiver that properly emulates a human receiver. For this purpose, a scale model artificial head has been constructed and tested. This paper presents the design and construction methods used, proper equalization procedures, and measurements of its response. A headphone listening experiment examining sound externalization with various reflection conditions is presented that demonstrates its use for psycho-acoustic testing.

Balancing Play, Meaning and Reality: The Design Philosophy of LEVEE PATROLLER

ERIC Educational Resources Information Center

Harteveld, Casper; Guimaraes, Rui; Mayer, Igor S.; Bidarra, Rafael

2010-01-01

Most serious games have been developed without a proper and comprehensive design theory. To contribute to the development of such a theory, this article presents the underlying design philosophy of LEVEE PATROLLER, a game to train levee patrollers in the Netherlands. This philosophy stipulates that the design of a digital serious game is a…

Design of pulsed guiding magnetic field for high power microwave generators.

PubMed

Ju, J-C; Zhang, H; Zhang, J; Shu, T; Zhong, H-H

2014-09-01

In this paper, we present a comprehensive study on designing solenoid together with the corresponding power supply system to excite pulsed magnetic field required for high power microwave generators. Particularly, a solenoid is designed and the excited magnetic field is applied to a Ku-band overmoded Cerenkov generator. It is found in experiment that the electron beam is properly guided by the magnetic field and a 1.1 GW high power microwave is achieved at a central frequency of 13.76 GHz. Pulsed solenoid system has the advantages of compactness and low energy consumption, which are of great interest for repetitive operation. The reported studies and results can be generalized to other applications which require magnetic fields.

The Design and Analysis of Salmonid Tagging Studies in the Columbia Basin : Volume II: Experiment Salmonid Survival with Combined PIT-CWT Tagging.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Newman, Ken

1997-06-01

Experiment designs to estimate the effect of transportation on survival and return rates of Columbia River system salmonids are discussed along with statistical modeling techniques. Besides transportation, river flow and dam spill are necessary components in the design and analysis otherwise questions as to the effects of reservoir drawdowns and increased dam spill may never be satisfactorily answered. Four criteria for comparing different experiment designs are: (1) feasibility, (2) clarity of results, (3) scope of inference, and (4) time to learn. In this report, alternative designs for conducting experimental manipulations of smolt tagging studies to study effects of river operationsmore » such as flow levels, spill fractions, and transporting outmigrating salmonids around dams in the Columbia River system are presented. The principles of study design discussed in this report have broad implications for the many studies proposed to investigate both smolt and adult survival relationships. The concepts are illustrated for the case of the design and analysis of smolt transportation experiments. The merits of proposed transportation studies should be measured relative to these principles of proper statistical design and analysis.« less

Improving Women's Sexual Health: A Quantitative Evaluation of an Educational Intervention for Healthcare Professionals

ERIC Educational Resources Information Center

Blair, Britney; Arnow, B. A.; Haas, Amie; Millheiser, Leah

2013-01-01

Forty-three per cent of women in the USA report some type of sexual complaint and these complaints have been shown to negatively impact quality of life and overall well-being. With proper training and experience, healthcare professionals are in a unique position to help their patients improve their sexual health. The present study was designed to…

Substance Abuse Training and Perceived Knowledge: Predictors of Perceived Preparedness to Work in Substance Abuse

ERIC Educational Resources Information Center

Bina, Rena; Yum, Joohee; Hall, Diane M. Harnek; Sowbel, Lynda; Mollette, Angela; Jani, Jayshree; Smith-Osborne, Alexa

2008-01-01

As frontline mental health care providers, social workers need to be prepared to confront and properly manage substance abuse issues in practice. This study examined predictors of recent master of social work (MSW) graduates' perceptions of preparedness to practice in the area of substance abuse. A cross-sectional design was used, and 232 recent…

An Instructional Design Using the Virtual Ecological Pond for Science Education in Elementary Schools

ERIC Educational Resources Information Center

Tarng, Wernhuar; Ou, Kuo-Liang; Tsai, Wen-Shin; Lin, Yu-Si; Hsu, Chen-Kai

2010-01-01

Ecological ponds can be a good teaching tool for science teachers, but they must be built and maintained properly to provide students with a safe and suitable learning environment. However, many schools do not have the ability to build and maintain an ecological pond. This study used virtual reality technology to develop a web-based virtual…

The Integration of Technology into School Curriculum in Saudi Arabia: Factors Affecting Technology Implementation in the Classroom

ERIC Educational Resources Information Center

Barri, Moatasim A.

2013-01-01

There are a number of factors that influence technology implementation in the classroom including teachers' concerns; barriers; and intrinsic incentives. These factors give classroom teachers a chance to make a shift in their thinking and practice to help them properly integrate technology across the curriculum. This study was designed to assess:…

Guidelines for Developing Spacecraft Structural Requirements: A Thermal and Environmental Perspective

NASA Technical Reports Server (NTRS)

Holladay, Jon; Day, Greg; Gill, Larry

2004-01-01

Spacecraft are typically designed with a primary focus on weight in order to meet launch vehicle performance parameters. However, for pressurized and/or man-rated spacecraft, it is also necessary to have an understanding of the vehicle operating environments to properly size the pressure vessel. Proper sizing of the pressure vessel requires an understanding of the space vehicle's life cycle and compares the physical design optimization (weight and launch "cost") to downstream operational complexity and total life cycle cost. This paper will provide an overview of some major environmental design drivers and provide examples for calculating the optimal design pressure versus a selected set of design parameters related to thermal and environmental perspectives. In addition, this paper will provide a generic set of cracking pressures for both positive and negative pressure relief valves that encompasses worst case environmental effects for a variety of launch / landing sites. Finally, several examples are included to highlight pressure relief set points and vehicle weight impacts for a selected set of orbital missions.

Design study of a feedback control system for the Multicyclic Flap System rotor (MFS)

NASA Technical Reports Server (NTRS)

Weisbrich, R.; Perley, R.; Howes, H.

1977-01-01

The feasibility of automatically providing higher harmonic control to a deflectable control flap at the tip of a helicopter rotor blade through feedback of selected independent parameter was investigated. Control parameters were selected for input to the feedback system. A preliminary circuit was designed to condition the selected parameters, weigh limiting factors, and provide a proper output signal to the multi-cyclic control actuators. Results indicate that feedback control for the higher harmonic is feasible; however, design for a flight system requires an extension of the present analysis which was done for one flight condition - 120 kts, 11,500 lbs gross weight and level flight.

Blast Testing Issues and TBI: Experimental Models That Lead to Wrong Conclusions.

PubMed

Needham, Charles E; Ritzel, David; Rule, Gregory T; Wiri, Suthee; Young, Leanne

2015-01-01

Over the past several years, we have noticed an increase in the number of blast injury studies published in peer-reviewed biomedical journals that have utilized improperly conceived experiments. Data from these studies will lead to false conclusions and more confusion than advancement in the understanding of blast injury, particularly blast neurotrauma. Computational methods to properly characterize the blast environment have been available for decades. These methods, combined with a basic understanding of blast wave phenomena, enable researchers to extract useful information from well-documented experiments. This basic understanding must include the differences and interrelationships of static pressure, dynamic pressure, reflected pressure, and total or stagnation pressure in transient shockwave flows, how they relate to loading of objects, and how they are properly measured. However, it is critical that the research community effectively overcomes the confusion that has been compounded by a misunderstanding of the differences between the loading produced by a free field explosive blast and loading produced by a conventional shock tube. The principles of blast scaling have been well established for decades and when properly applied will do much to repair these problems. This paper provides guidance regarding proper experimental methods and offers insights into the implications of improperly designed and executed tests. Through application of computational methods, useful data can be extracted from well-documented historical tests, and future work can be conducted in a way to maximize the effectiveness and use of valuable biological test data.

Design of an autonomous Lunar construction utility vehicle

NASA Technical Reports Server (NTRS)

Ash, Robert L.; Chew, Mason; Dixon, Iain (Editor)

1990-01-01

In order to prepare a site for a manned lunar base, an autonomously operated construction vehicle is necessary. A Lunar Construction Utility Vehicle (LCUV), which utilizes interchangeable construction implements, was designed conceptually. Some elements of the machine were studied in greater detail. Design of an elastic loop track system has advanced to the testing stage. A standard coupling device was designed to insure a proper connection between the different construction tools and the LCUV. Autonomous control of the track drive motors was simulated successfully through the use of a joystick and computer interface. A study of hydrogen-oxygen fuel cells has produced estimates of reactant and product size requirements and identified multi-layer insulation techniques. Research on a 100 kW heat rejection system has determined that it is necessary to house a radiator panel on a utility trailer. The impact of a 720 hr use cycle has produced a very large logistical support lien which requires further study.

Usage of the back-propagation method for alphabet recognition

NASA Astrophysics Data System (ADS)

Shaila Sree, R. N.; Eswaran, Kumar; Sundararajan, N.

1999-03-01

Artificial Neural Networks play a pivotal role in the branch of Artificial Intelligence. They can be trained efficiently for a variety of tasks using different methods, of which the Back Propagation method is one among them. The paper studies the choosing of various design parameters of a neural network for the Back Propagation method. The study shows that when these parameters are properly assigned, the training task of the net is greatly simplified. The character recognition problem has been chosen as a test case for this study. A sample space of different handwritten characters of the English alphabet was gathered. A Neural net is finally designed taking many the design aspects into consideration and trained for different styles of writing. Experimental results are reported and discussed. It has been found that an appropriate choice of the design parameters of the neural net for the Back Propagation method reduces the training time and improves the performance of the net.

Design-based stereology: Planning, volumetry and sampling are crucial steps for a successful study.

PubMed

Tschanz, Stefan; Schneider, Jan Philipp; Knudsen, Lars

2014-01-01

Quantitative data obtained by means of design-based stereology can add valuable information to studies performed on a diversity of organs, in particular when correlated to functional/physiological and biochemical data. Design-based stereology is based on a sound statistical background and can be used to generate accurate data which are in line with principles of good laboratory practice. In addition, by adjusting the study design an appropriate precision can be achieved to find relevant differences between groups. For the success of the stereological assessment detailed planning is necessary. In this review we focus on common pitfalls encountered during stereological assessment. An exemplary workflow is included, and based on authentic examples, we illustrate a number of sampling principles which can be implemented to obtain properly sampled tissue blocks for various purposes. Copyright © 2013 Elsevier GmbH. All rights reserved.

Years to first rehabilitation of superpave hot mix asphalt.

DOT National Transportation Integrated Search

2014-07-01

The Colorado Department of Transportation (CDOT) spends more than 30 percent of its annual construction and : maintenance budget on pavements, so pavements need to be properly designed using an analytical process with : accurate design inputs. A pave...

Regulatory considerations in the design of comparative observational studies using propensity scores.

PubMed

Yue, Lilly Q

2012-01-01

In the evaluation of medical products, including drugs, biological products, and medical devices, comparative observational studies could play an important role when properly conducted randomized, well-controlled clinical trials are infeasible due to ethical or practical reasons. However, various biases could be introduced at every stage and into every aspect of the observational study, and consequently the interpretation of the resulting statistical inference would be of concern. While there do exist statistical techniques for addressing some of the challenging issues, often based on propensity score methodology, these statistical tools probably have not been as widely employed in prospectively designing observational studies as they should be. There are also times when they are implemented in an unscientific manner, such as performing propensity score model selection for a dataset involving outcome data in the same dataset, so that the integrity of observational study design and the interpretability of outcome analysis results could be compromised. In this paper, regulatory considerations on prospective study design using propensity scores are shared and illustrated with hypothetical examples.

Design of a video teleconference facility for a synchronous satellite communications link

NASA Technical Reports Server (NTRS)

Richardson, M. D.

1979-01-01

The system requirements, design tradeoffs, and final design of a video teleconference facility are discussed, including proper lighting, graphics transmission, and picture aesthetics. Methods currently accepted in the television broadcast industry are used in the design. The unique problems associated with using an audio channel with a synchronous satellite communications link are discussed, and a final audio system design is presented.

Porter's generic strategies, discontinuous environments, and performance: a longitudinal study of changing strategies in the hospital industry.

PubMed

Lamont, B T; Marlin, D; Hoffman, J J

1993-12-01

Changes in generic strategies in response to discontinuous environments have been relatively ignored in the management literature. This study reports an examination of the relationships between Porter's (1980) generic strategies, discontinuous environments, and performance. Archival data for 1984 and 1988 were collected for 172 acute care hospitals in Florida in order to test these relationships. To examine fully the performance impact of changes in strategy in a discontinuous environment, a longitudinal research design that identified a firm's strategy at two points in time, 1984 and 1988, was used. Results indicate that firms with a proper strategy environment fit performed the highest, firms that did not change their strategy had no change in performance, and firms that changed their strategy toward a proper strategy environment showed an increase in performance. Findings support the notion that hospitals with appropriate strategy-environment combinations will exhibit higher performance.

Application of Face-Gear Drives in Helicopter Transmissions

NASA Technical Reports Server (NTRS)

Litvin, F. L.; Wang, J.-C.; Bossler, R. B., Jr.; Chen, Y.-J. D.; Heath, G.; Lewicki, D. G.

1992-01-01

The use of face gears in helicopter transmissions was explored. A light-weight, split torque transmission design utilizing face gears was described. Face-gear design and geometry were investigated. Topics included tooth generation, limiting inner and outer radii, tooth contact analysis, contact ratio, gear eccentricity, and structural stiffness. Design charts were developed to determine minimum and maximum face-gear inner and outer radii. Analytical study of transmission error showed face-gear drives were relatively insensitive to gear misalignment, but tooth contact was affected by misalignment. A method of localizing bearing contact to compensate for misalignment was explored. The proper choice of shaft support stiffness enabled good load sharing in the split torque transmission design. Face-gear experimental studies were also included and the feasibility of face gears in high-speed, high-load applications such as helicopter transmissions was demonstrated.

47 CFR 74.634 - Remote control operation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO... control system must be designed, installed, and protected so that the transmitter can only be activated or... ensure proper operation. (3) The remote control system must be designed to prevent inadvertent...

47 CFR 74.634 - Remote control operation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO... control system must be designed, installed, and protected so that the transmitter can only be activated or... ensure proper operation. (3) The remote control system must be designed to prevent inadvertent...

47 CFR 74.634 - Remote control operation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO... control system must be designed, installed, and protected so that the transmitter can only be activated or... ensure proper operation. (3) The remote control system must be designed to prevent inadvertent...

47 CFR 74.634 - Remote control operation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO... control system must be designed, installed, and protected so that the transmitter can only be activated or... ensure proper operation. (3) The remote control system must be designed to prevent inadvertent...

47 CFR 74.634 - Remote control operation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO... control system must be designed, installed, and protected so that the transmitter can only be activated or... ensure proper operation. (3) The remote control system must be designed to prevent inadvertent...

Collection of materials and performance data for Texas flexible pavements and overlays : project summary.

DOT National Transportation Integrated Search

2015-08-31

Proper calibration of mechanistic-empirical : (M-E) design and rehabilitation performance : models to meet Texas conditions is essential : for cost-effective flexible pavement designs. : Such a calibration effort would require a : reliable source of ...

46 CFR 61.35-1 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PERIODIC TESTS AND INSPECTIONS Design Verification and Periodic Testing for Automatic Auxiliary Boilers § 61.35-1 General. (a) All automatic... equipment must be tested and inspected to verify their proper design, construction, installation, and...

On the Design of Smart Homes: A Framework for Activity Recognition in Home Environment.

PubMed

Cicirelli, Franco; Fortino, Giancarlo; Giordano, Andrea; Guerrieri, Antonio; Spezzano, Giandomenico; Vinci, Andrea

2016-09-01

A smart home is a home environment enriched with sensing, actuation, communication and computation capabilities which permits to adapt it to inhabitants preferences and requirements. Establishing a proper strategy of actuation on the home environment can require complex computational tasks on the sensed data. This is the case of activity recognition, which consists in retrieving high-level knowledge about what occurs in the home environment and about the behaviour of the inhabitants. The inherent complexity of this application domain asks for tools able to properly support the design and implementation phases. This paper proposes a framework for the design and implementation of smart home applications focused on activity recognition in home environments. The framework mainly relies on the Cloud-assisted Agent-based Smart home Environment (CASE) architecture offering basic abstraction entities which easily allow to design and implement Smart Home applications. CASE is a three layered architecture which exploits the distributed multi-agent paradigm and the cloud technology for offering analytics services. Details about how to implement activity recognition onto the CASE architecture are supplied focusing on the low-level technological issues as well as the algorithms and the methodologies useful for the activity recognition. The effectiveness of the framework is shown through a case study consisting of a daily activity recognition of a person in a home environment.

Designing Birefringent Filters For Solid-State Lasers

NASA Technical Reports Server (NTRS)

Monosmith, Bryan

1992-01-01

Mathematical model enables design of filter assembly of birefringent plates as integral part of resonator cavity of tunable solid-state laser. Proper design treats polarization eigenstate of entire resonator as function of wavelength. Program includes software modules for variety of optical elements including Pockels cell, laser rod, quarter- and half-wave plates, Faraday rotator, and polarizers.

Statistical Analysis for the Solomon Four-Group Design. Research Report 99-06.

ERIC Educational Resources Information Center

van Engelenburg, Gijsbert

The Solomon four-group design (R. Solomon, 1949) is a very useful experimental design to investigate the main effect of a pretest and the interaction of pretest and treatment. Although the design was proposed half a century ago, no proper data analysis techniques have been available. This paper describes how data from the Solomon four-group design…

Rationale, design features, and baseline characteristics: The Heart Institute of Japan-PRoper level of lipid lOwering with Pitavastatin and Ezetimibe in acute coRonary syndrome (HIJ-PROPER).

PubMed

Kawada-Watanabe, Erisa; Ogawa, Hiroshi; Koyanagi, Ryo; Arashi, Hiroyuki; Yamaguchi, Junichi; Matsui, Kunihiko; Hagiwara, Nobuhisa

2017-03-01

In contrast to current guidelines in Western countries, moderate reduction of low-density lipoprotein cholesterol (LDL-C) is recommended for Japanese patients with atherosclerotic cardiovascular disease and dyslipidemia even in secondary prevention. HIJ-PROPER (Heart Institute of Japan-PRoper level of lipid lOwering with Pitavastatin and Ezetimibe in acute coRonary syndrome) is a prospective, randomized, open-label, blinded endpoint multicenter trial designed to assess whether closely controlled LDL-C lowering with a standard statin dose plus ezetimibe, targeting LDL-C of <70mg/dL, would reduce cardiovascular events more than standard statin monotherapy targeting LDL-C of <100mg/dL as per the Japan Atherosclerotic Society guideline in patients with acute coronary syndrome (ACS) and dyslipidemia. We recruited patients with ACS and dyslipidemia who had undergone coronary angiography. Participants are randomly allocated to either intensive LDL-C lowering treatment (target LDL-C of <70mg/dL; pitavastatin plus ezetimibe) or standard LDL-C lowering treatment (target LDL-C of 90-100mg/dL; pitavastatin monotherapy). The primary endpoint is a composite of total death, non-fatal myocardial infarction (MI), non-fatal stroke, unstable angina, and any ischemia-driven revascularization. Patients will be followed for a minimum of 3 years. Between January 2010 and April 2013, 1734 patients were enrolled from 19 hospitals in Japan with a mean age of 65.6 years; 75.5% were men and 83.3% were statin-naïve. The qualifying ACS was an acute MI in 61.5%. This study is expected to report its findings in August 2016. HIJ-PROPER will determine whether targeting LDL-C of <70mg/dL with pitavastatin plus ezetimibe can improve cardiovascular outcomes in Japanese patients with ACS and dyslipidemia in comparison to targeting LDL-C of 90-100mg/dL with standard pitavastatin monotherapy. UMIN000002742. Copyright © 2016 Japanese College of Cardiology. Published by Elsevier Ltd. All rights reserved.

Designing and assessing fixed dental prostheses 2 multimedia-based education in dentistry students

PubMed Central

Jahandideh, Yousef; Roohi Balasi, Leila; Vadiati Saberi, Bardia; Dadgaran, Ideh

2016-01-01

Background: Above all methods effective learning results from decent training, acquired in the proper environment and encouraging creative methods. Computer-assisted training by educational software is considered a fundamental measure to improve medical and dentistry education systems. This study aims to design and assess fixed dental prostheses via 2 multimedia instructional contents at the Guilan dentistry school. Methods: This is a descriptive and cross-sectional study. First off, the instructional content was analyzed. The software used to produce multimedia was the iSpring suite Ver.7.0. After designing the instructional multimedia, this software was loaded by LMS. Sixty-nine dentistry students in the 5th semester at Guilan Dentistry School were selected via convenience sampling. At the end of the course, a structured questionnaire containing 26 items were handed to the students to evaluate the instructional multimedia quality. Results: Mean ±SD age was 24.68±3.24 years, 43 were women (62.4%) and 26 were men (37.6%) –the majority of 76.8% used the internet at home. A portion of 33.3% were inclined to use multimedia and the internet with in-person training. About 60% declared that multimedia quality as being good. Conclusion: the instructional multimedia designs which are compatible with lesson objectives and audiovisual facilities can have a great effect on the student's satisfaction. Preparing instructional multimedia makes the instructional content easily accessible for students to be able to review it several times at the proper opportunity and if presented through LMS they would be able to study the lesson subject wherever and whenever accessing the internet. PMID:28491830

Pivotal factors concerned in design of acupuncture clinical research: From two articles in JAMA.

PubMed

Wu, Jia-Ni; Qin, Zong-Shi; Liu, Zhi-Shun

2017-11-01

Two randomized controlled trials of acupuncture concerning polycystic ovary syndrome (PCOS) and stress urinary incontinence (SUI) were published simultaneously in the 24th issue, 2017 of The Journal of the American Medical Association (JAMA). A trial involving PCOS indicated that active acupuncture did not increase live birth compared with sham acupuncture; meanwhile, another trial referring to SUI showed that electroacupuncture resulted in less urine leakage compared with sham electroacupuncture. With an eye to the negative and positive results of acupuncture, three pivotal factors should be contemplated: (1) proper illness for acupuncture, that is, a problem need to be solved in current medical science, and acupuncture may really work for it; (2) proper pre-studied primary outcome, which is better be objective and repeatedly measurable to reveal the therapeutic effect of acupuncture truly and objectively; (3) proper sham control, which can blind the patients to the upmost extent with minimal biological effects. Through the publication of clinical trials of acupuncture in high-impact journals in recent years, researchers should have confidence in their clinical trials by pondering over these three pivotal factors.

Advanced study of video signal processing in low signal to noise environments

NASA Technical Reports Server (NTRS)

Carden, F.; Henry, R.

1972-01-01

A nonlinear analysis of a multifilter phase-lockloop (MPLL) by using the method of harmonic balance is presented. The particular MPLL considered has a low-pass filter and a band-pass filter in parallel. An analytic expression for the relationship between the input signal phase deviation and the phase error is determined for sinusoidal FM in the absence of noise. The expression is used to determine bounds on the proper operating region for the MPLL and to investigate the jump phenomenon previously observed. From these results the proper modulation index, modulating frequency, etc. used for the design of a MPLL are determined. Data for the loop unlock boundary obtained from the theoretical expression are compared to data obtained from analog computer simulations of the MPLL.

The design of low cost structures for extensive ground arrays

NASA Technical Reports Server (NTRS)

Franklin, H. A.; Leonard, R. S.

1980-01-01

The development of conceptual designs of solar array support structures and their foundations including considerations of the use of concrete, steel, aluminum, or timber are reported. Some cost trends were examined by varying selected parameters to determine optimum configurations. Detailed civil/structural design criteria were developed. Using these criteria, eight detailed designs for support structures and foundations were developed and cost estimates were made. As a result of the study wind was identified as the major loading experienced by these low height structures, whose arrays are likely to extend over large tracts of land. Proper wind load estimating is considered essential to developing realistic structural designs and achieving minimum cost support structures. Wind tunnel testing of a conceptual array field was undertaken and some of the resulting wind design criteria are presented. The SPS rectenna system designs may be less sensitive to wind load estimates, but consistent design criteria remain important.

Dynamic Compression of the Signal in a Charge Sensitive Amplifier: From Concept to Design

NASA Astrophysics Data System (ADS)

Manghisoni, Massimo; Comotti, Daniele; Gaioni, Luigi; Ratti, Lodovico; Re, Valerio

2015-10-01

This work is concerned with the design of a low-noise Charge Sensitive Amplifier featuring a dynamic signal compression based on the non-linear features of an inversion-mode MOS capacitor. These features make the device suitable for applications where a non-linear characteristic of the front-end is required, such as in imaging instrumentation for free electron laser experiments. The aim of the paper is to discuss a methodology for the proper design of the feedback network enabling the dynamic signal compression. Starting from this compression solution, the design of a low-noise Charge Sensitive Amplifier is also discussed. The study has been carried out by referring to a 65 nm CMOS technology.

Teaching childbirth with high-fidelity simulation. Is it better observing the scenario during the briefing session?

PubMed

Cuerva, Marcos J; Piñel, Carlos S; Martin, Lourdes; Espinosa, Jose A; Corral, Octavio J; Mendoza, Nicolás

2018-02-12

The design of optimal courses for obstetric undergraduate teaching is a relevant question. This study evaluates two different designs of simulator-based learning activity on childbirth with regard to respect to the patient, obstetric manoeuvres, interpretation of cardiotocography tracings (CTG) and infection prevention. This randomised experimental study which differs in the content of their briefing sessions consisted of two groups of undergraduate students, who performed two simulator-based learning activities on childbirth. The first briefing session included the observations of a properly performed scenario according to Spanish clinical practice guidelines on care in normal childbirth by the teachers whereas the second group did not include the observations of a properly performed scenario, and the students observed it only after the simulation process. The group that observed a properly performed scenario after the simulation obtained worse grades during the simulation, but better grades during the debriefing and evaluation. Simulator use in childbirth may be more fruitful when the medical students observe correct performance at the completion of the scenario compared to that at the start of the scenario. Impact statement What is already known on this subject? There is a scarcity of literature about the design of optimal high-fidelity simulation training in childbirth. It is known that preparing simulator-based learning activities is a complex process. Simulator-based learning includes the following steps: briefing, simulation, debriefing and evaluation. The most important part of high-fidelity simulations is the debriefing. A good briefing and simulation are of high relevance in order to have a fruitful debriefing session. What do the results of this study add? Our study describes a full simulator-based learning activity on childbirth that can be reproduced in similar facilities. The findings of this study add that high-fidelity simulation training in childbirth is favoured by a short briefing session and an abrupt start to the scenario, rather than a long briefing session that includes direct instruction in the scenario. What are the implications of these findings for clinical practice and/or further research? The findings of this study reveal what to include in the briefing of simulator-based learning activities on childbirth. These findings have implications in medical teaching and in medical practice.

Phenomena induced by charged particle beams. [experimental design for Spacelab

NASA Technical Reports Server (NTRS)

Beghin, C.

1981-01-01

The injection of energetic particles along the Earth's magnetic field lines is a possible remote sensing method for measuring the electric fields parallel to the magnetic field with good time resolution over the entire magnetic field. Neutralization processes, return-current effects, dynamics of the beams, triggered instabilities, and waves must be investigated before the fundamental question about proper experimental conditions, such as energy, intensity and divergence of the beams, pitch-angle injection, ion species, proper probes and detectors and their location, and rendezvous conditions, can be resolved. An experiment designed to provide a better understanding of these special physical processes and to provide some answers to questions concerning beam injection techniques is described.

Which Perceptions Do We Have Related to Our Rights as Child? Child Rights from the Perspective of Primary School Students

ERIC Educational Resources Information Center

Hareket, Erdem; Yel, Selma

2017-01-01

This study was carried out with the goal of investigation of perceptions and views which are related to children's rights of forth grade primary school students. The research was designed properly to qualitative research approach. This research was made with 156 4th grade students. In determining of the research group, criterion sampling technique…

Development of design guidelines for proper selection of graded aggregate base in Maryland state highways.

DOT National Transportation Integrated Search

2015-01-01

The mechanical and drainage properties of graded aggregate base material are the level one input in mechanistic : pavement design. Maryland State Highway Administration (SHA) is in need of guidelines for evaluation of stiffness : and drainage charact...

Linear time-invariant controller design for two-channel decentralized control systems

NASA Technical Reports Server (NTRS)

Desoer, Charles A.; Gundes, A. Nazli

1987-01-01

This paper analyzes a linear time-invariant two-channel decentralized control system with a 2 x 2 strictly proper plant. It presents an algorithm for the algebraic design of a class of decentralized compensators which stabilize the given plant.

User Interface Design for Dynamic Geometry Software

ERIC Educational Resources Information Center

Kortenkamp, Ulrich; Dohrmann, Christian

2010-01-01

In this article we describe long-standing user interface issues with Dynamic Geometry Software and common approaches to address them. We describe first prototypes of multi-touch-capable DGS. We also give some hints on the educational benefits of proper user interface design.

Committee Report: Metrics & Methods for MF/UF System Optimization

EPA Science Inventory

After a membrane filtration (i.e., microfiltration (MF) and ultrafiltration (UF)) system is designed, installed, and commissioned, it is essential that the plant is well-maintained in order to proactively identify potential design or equipment problems and ensure its proper opera...

Design philosophy and operating experience with the WNRE Hot Cell Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, R.G.; Seymour, C.G.; Ryz, M.A.

1969-10-15

The objective of radiation safety and operating efficiency often conflict. The key to preventing this conflict is proper design. In this paper we discuss how both objectives have been met in the Whiteshell Nuclear Research Establishment (WNRE) Hot Cell Facilities.

Structure and Management of an Engineering Senior Design Course.

PubMed

Tanaka, Martin L; Fischer, Kenneth J

2016-07-01

The design of products and processes is an important area in engineering. Students in engineering schools learn fundamental principles in their courses but often lack an opportunity to apply these methods to real-world problems until their senior year. This article describes important elements that should be incorporated into a senior capstone design course. It includes a description of the general principles used in engineering design and a discussion of why students often have difficulty with application and revert to trial and error methods. The structure of a properly designed capstone course is dissected and its individual components are evaluated. Major components include assessing resources, identifying projects, establishing teams, understanding requirements, developing conceptual designs, creating detailed designs, building prototypes, testing performance, and final presentations. In addition to the course design, team management and effective mentoring are critical to success. This article includes suggested guidelines and tips for effective design team leadership, attention to detail, investment of time, and managing project scope. Furthermore, the importance of understanding business culture, displaying professionalism, and considerations of different types of senior projects is discussed. Through a well-designed course and proper mentoring, students will learn to apply their engineering skills and gain basic business knowledge that will prepare them for entry-level positions in industry.

Sustainability Engineering and Maintenance - Plan, Design, and Construct for Maintainability: Sustainable Lighting Systems

DTIC Science & Technology

2011-01-01

Window film should be considered to control heat gain. Skylights when positioned and spaced properly with the proper lens systems, admit more light...per unit area than windows, and distribute the light more evenly over the space. Skylights are mainly recommended in single floor high bay...facilities such as warehouses, hangars, gymnasiums, and big box stores.  The optimum material to use for skylights is either glass or acrylic. Double

Medical management of youth baseball and softball tournaments.

PubMed

Kanaan, Matthew; Ray, Tracy R

2013-01-01

The medical management of youth baseball and softball tournaments requires both proper planning and a basic awareness of commonly seen sport-specific injuries. While youth sporting events are designed to be a fun experience for all, injuries and emergencies will occur. With proper planning, and supplies, the impact of these issues can be minimized. This article will outline some basic principles for the medical personnel that may be involved in youth baseball and softball events.

Engineering criteria for fracture flowback procedures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barree, R.D.; Mukherjee, H.

1995-12-31

Post treatment fracture flowback procedures during closure are often critical to the retention of fracture conductivity near the wellbore. Postfrac production performance largely depends on this conductivity. The importance of proper flowback procedure has been documented in the fracture industry, but definitive guidelines for flowback design have never been established. As a result, many misconceptions exist regarding the physics of proppant flowback and its effects on the final proppant distribution in the fracture. This paper presents a rigorous study of fracture flowback and proppant migration during closure using a fully three-dimensional fracture geometry simulator (GOHFER). The effects of rate ofmore » flowback, location of the perforation interval, final proppant concentration, and the fracture geometry prior to flowback on the retained post closure proppant concentration are discussed. Consideration is given to the fluid velocity field in the created fracture resulting from the flowback, and its effects on proppant movement and localized fracture closure. These studies illustrate the difference between ``forced closure`` and ``reverse screenout`` concepts in flowback design. Other effects such as crossflow between multiple perforated layers are also studied. Simulation studies indicate that selection of a desirable flowback rate is very sensitive to crossflow effects resulting from induced fractures in multiple stress layers. This crossflow can result in significant overflushing of proppant in the lower stress zones, if not countered by properly applied flowback procedures.« less

Classification of urine sediment based on convolution neural network

NASA Astrophysics Data System (ADS)

Pan, Jingjing; Jiang, Cunbo; Zhu, Tiantian

2018-04-01

By designing a new convolution neural network framework, this paper breaks the constraints of the original convolution neural network framework requiring large training samples and samples of the same size. Move and cropping the input images, generate the same size of the sub-graph. And then, the generated sub-graph uses the method of dropout, increasing the diversity of samples and preventing the fitting generation. Randomly select some proper subset in the sub-graphic set and ensure that the number of elements in the proper subset is same and the proper subset is not the same. The proper subsets are used as input layers for the convolution neural network. Through the convolution layer, the pooling, the full connection layer and output layer, we can obtained the classification loss rate of test set and training set. In the red blood cells, white blood cells, calcium oxalate crystallization classification experiment, the classification accuracy rate of 97% or more.

Design of Organic Solar Cells as a Function of Radiative Quantum Efficiency

NASA Astrophysics Data System (ADS)

Godefroid, Blaise; Kozyreff, Gregory

2017-09-01

We study the radiative decay, or fluorescence, of excitons in organic solar cells as a function of its geometrical parameters. Contrary to their nonradiative counterpart, fluorescence losses strongly depend on the environment. By properly tuning the thicknesses of the buffer layers between the active regions of the cell and the electrodes, the exciton lifetime and, hence, the exciton diffusion length can be increased. The importance of this phenomenon depends on the radiative quantum efficiency, which is the fraction of the exciton decay that is intrinsically due to fluorescence. Besides this effect, interferences within the cell control the efficiency of sunlight injection into the active layers. The optimal cell design must rely on a consideration of these two aspects. By properly managing fluorescence losses, one can significantly improve the cell performance. To demonstrate this fact, we use realistic material parameters inspired from literature data and obtain an increase of power-conversion efficiency from 11.3% to 12.7%. Conversely, not to take into account the strong dependence of fluorescence on the environment may lead to a suboptimal cell design and a degradation of cell performance. The presence of radiative losses, however small, significantly changes the optimal set of thicknesses. We illustrate the latter situation with experimental material data.

How small is small enough? Role of robotics in paediatric urology

PubMed Central

Ganpule, Arvind P.; Sripathi, Venkat

2015-01-01

The well-known advantages of robotic surgery include improved dexterity, three-dimensional operating view and an improved degree of freedom. Robotic surgery is performed for a wide range of surgeries in urology, which include radical prostatectomy, radical cystectomy, and ureteric reimplantation. Robotic paediatric urology is evolving. The major hindrance in the development of paediatric robotics is, first, the differences in practice patterns in paediatric urology compared with adult urology thereby making development of expertise difficult and secondly it is challenging to conduct proper studies in the paediatric population because of the paucity of cases. The difficulties in conducting these studies include difficulty in designing a proper randomised study, difficulties with blinding, and finally, the ethical issues involved, finally the instruments although in the phase of evolution require a lot of improvement. In this article, we review the relevant articles for paediatric robotic surgery. We emphasise on the technical aspects and results in contemporary paediatric robotic case series. PMID:25598599

How small is small enough? Role of robotics in paediatric urology.

PubMed

Ganpule, Arvind P; Sripathi, Venkat

2015-01-01

The well-known advantages of robotic surgery include improved dexterity, three-dimensional operating view and an improved degree of freedom. Robotic surgery is performed for a wide range of surgeries in urology, which include radical prostatectomy, radical cystectomy, and ureteric reimplantation. Robotic paediatric urology is evolving. The major hindrance in the development of paediatric robotics is, first, the differences in practice patterns in paediatric urology compared with adult urology thereby making development of expertise difficult and secondly it is challenging to conduct proper studies in the paediatric population because of the paucity of cases. The difficulties in conducting these studies include difficulty in designing a proper randomised study, difficulties with blinding, and finally, the ethical issues involved, finally the instruments although in the phase of evolution require a lot of improvement. In this article, we review the relevant articles for paediatric robotic surgery. We emphasise on the technical aspects and results in contemporary paediatric robotic case series.

Mixed methods research design for pragmatic psychoanalytic studies.

PubMed

Tillman, Jane G; Clemence, A Jill; Stevens, Jennifer L

2011-10-01

Calls for more rigorous psychoanalytic studies have increased over the past decade. The field has been divided by those who assert that psychoanalysis is properly a hermeneutic endeavor and those who see it as a science. A comparable debate is found in research methodology, where qualitative and quantitative methods have often been seen as occupying orthogonal positions. Recently, Mixed Methods Research (MMR) has emerged as a viable "third community" of research, pursuing a pragmatic approach to research endeavors through integrating qualitative and quantitative procedures in a single study design. Mixed Methods Research designs and the terminology associated with this emerging approach are explained, after which the methodology is explored as a potential integrative approach to a psychoanalytic human science. Both qualitative and quantitative research methods are reviewed, as well as how they may be used in Mixed Methods Research to study complex human phenomena.

Design and Development of the Space Shuttle Tail Service Masts

NASA Technical Reports Server (NTRS)

Dandage, S. R.; Herman, N. A.; Godfrey, S. E.; Uda, R. T.

1977-01-01

The successful launch of a space shuttle vehicle depends on the proper operation of two tail service masts (TSMs). Reliable TSM operation is assured through a comprehensive design, development, and testing program. The results of the concept verification test (CVT) and the resulting impact on prototype TSM design are presented. The design criteria are outlined, and the proposed prototype TSM tests are described.

An Intuitive Graphical Approach to Understanding the Split-Plot Experiment

ERIC Educational Resources Information Center

Robinson, Timothy J.; Brenneman, William A.; Myers, William R.

2009-01-01

While split-plot designs have received considerable attention in the literature over the past decade, there seems to be a general lack of intuitive understanding of the error structure of these designs and the resulting statistical analysis. Typically, students learn the proper error terms for testing factors of a split-plot design via "expected…

A discussion of higher order software concepts as they apply to functional requirements and specifications. [space shuttles and guidance

NASA Technical Reports Server (NTRS)

Hamilton, M.

1973-01-01

The entry guidance software functional requirements (requirements design phase), its architectural requirements (specifications design phase), and the entry guidance software verified code are discussed. It was found that the proper integration of designs at both the requirements and specifications levels are of high priority consideration.

37 CFR 262.7 - Verification of royalty payments.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Designated Agent have agreed as to proper verification methods. (b) Frequency of verification. A Copyright Owner or a Performer may conduct a single audit of the Designated Agent upon reasonable notice and... COPYRIGHT ARBITRATION ROYALTY PANEL RULES AND PROCEDURES RATES AND TERMS FOR CERTAIN ELIGIBLE...

40 CFR 264.1 - Purpose, scope and applicability.

Code of Federal Regulations, 2013 CFR

2013-07-01

... owner/operator must design, construct, operate, and maintain a unit within a 100-year floodplain to... procedures must address proper design, construction, maintenance, and operation of remediation waste..., the location of all records within the facility, and the facility layout. In addition, this person...

40 CFR 264.1 - Purpose, scope and applicability.

Code of Federal Regulations, 2012 CFR

2012-07-01

... owner/operator must design, construct, operate, and maintain a unit within a 100-year floodplain to... procedures must address proper design, construction, maintenance, and operation of remediation waste..., the location of all records within the facility, and the facility layout. In addition, this person...

40 CFR 264.1 - Purpose, scope and applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... owner/operator must design, construct, operate, and maintain a unit within a 100-year floodplain to... procedures must address proper design, construction, maintenance, and operation of remediation waste..., the location of all records within the facility, and the facility layout. In addition, this person...

Budget-Minded Renovation Lights Up Students' Learning.

ERIC Educational Resources Information Center

McDaniel, Craig

1998-01-01

Provides considerations for educational facility lighting designs that support student learning while controlling costs. Lighting design decision factors include the types of classroom activities involved, the importance of properly using artificial and indirect lighting, the importance of color rendering, the positioning of windows and skylights,…

Safe and Sanitary.

ERIC Educational Resources Information Center

Turner, Ed; Hauser, Dan

1994-01-01

Explains how daily maintenance and design planning can reduce the potential safety hazards found in athletic-facility locker rooms. Topics include designing locker rooms for visual openness and traffic control, providing non-slip surfaces and proper drainage, installing ventilation systems that can handle the moisture produced in locker rooms,…

Evaluation of drainage pipe by field experimentation and supplemental laboratory experimentation : final report.

DOT National Transportation Integrated Search

1985-03-01

Louisiana's Office of Highways reacts to a major problem when it attempts to shape and control drainage patterns along its right-of-ways. The Office's design engineers meet this challenge through proper section design and appropriate application of d...

5 CFR 930.102 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... motor vehicle to properly carry out his or her assigned duties. Motor vehicle means a vehicle designed... vehicle (a) designed or used for military field training, combat, or tactical purposes; (b) used principally within the confines of a regularly established military post, camp, or depot; or (c) regularly...

5 CFR 930.102 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... motor vehicle to properly carry out his or her assigned duties. Motor vehicle means a vehicle designed... vehicle (a) designed or used for military field training, combat, or tactical purposes; (b) used principally within the confines of a regularly established military post, camp, or depot; or (c) regularly...

5 CFR 930.102 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... motor vehicle to properly carry out his or her assigned duties. Motor vehicle means a vehicle designed... vehicle (a) designed or used for military field training, combat, or tactical purposes; (b) used principally within the confines of a regularly established military post, camp, or depot; or (c) regularly...

5 CFR 930.102 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... motor vehicle to properly carry out his or her assigned duties. Motor vehicle means a vehicle designed... vehicle (a) designed or used for military field training, combat, or tactical purposes; (b) used principally within the confines of a regularly established military post, camp, or depot; or (c) regularly...

5 CFR 930.102 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... motor vehicle to properly carry out his or her assigned duties. Motor vehicle means a vehicle designed... vehicle (a) designed or used for military field training, combat, or tactical purposes; (b) used principally within the confines of a regularly established military post, camp, or depot; or (c) regularly...

Evaluation of drainage pipe by field experimentation and supplemental laboratory experimentation : interim report No. 3.

DOT National Transportation Integrated Search

1981-11-01

The Louisiana Department of Transportation and Development reacts to a major problem when it attempts to shape and control drainage patterns along its right-of-ways. The Department's design engineers meet this challenge through proper section design ...

On long-time instabilities in staggered finite difference simulations of the seismic acoustic wave equations on discontinuous grids

NASA Astrophysics Data System (ADS)

Gao, Longfei; Ketcheson, David; Keyes, David

2018-02-01

We consider the long-time instability issue associated with finite difference simulation of seismic acoustic wave equations on discontinuous grids. This issue is exhibited by a prototype algebraic problem abstracted from practical application settings. Analysis of this algebraic problem leads to better understanding of the cause of the instability and provides guidance for its treatment. Specifically, we use the concept of discrete energy to derive the proper solution transfer operators and design an effective way to damp the unstable solution modes. Our investigation shows that the interpolation operators need to be matched with their companion restriction operators in order to properly couple the coarse and fine grids. Moreover, to provide effective damping, specially designed diffusive terms are introduced to the equations at designated locations and discretized with specially designed schemes. These techniques are applied to simulations in practical settings and are shown to lead to superior results in terms of both stability and accuracy.

An Attempt at Quantifying Factors that Affect Efficiency in the Management of Solid Waste Produced by Commercial Businesses in the City of Tshwane, South Africa

PubMed Central

Worku, Yohannes; Muchie, Mammo

2012-01-01

Objective. The objective was to investigate factors that affect the efficient management of solid waste produced by commercial businesses operating in the city of Pretoria, South Africa. Methods. Data was gathered from 1,034 businesses. Efficiency in solid waste management was assessed by using a structural time-based model designed for evaluating efficiency as a function of the length of time required to manage waste. Data analysis was performed using statistical procedures such as frequency tables, Pearson's chi-square tests of association, and binary logistic regression analysis. Odds ratios estimated from logistic regression analysis were used for identifying key factors that affect efficiency in the proper disposal of waste. Results. The study showed that 857 of the 1,034 businesses selected for the study (83%) were found to be efficient enough with regards to the proper collection and disposal of solid waste. Based on odds ratios estimated from binary logistic regression analysis, efficiency in the proper management of solid waste was significantly influenced by 4 predictor variables. These 4 influential predictor variables are lack of adherence to waste management regulations, wrong perception, failure to provide customers with enough trash cans, and operation of businesses by employed managers, in a decreasing order of importance. PMID:23209483

An ergonomic evaluation of manual Cleco plier designs: effects of rubber grip, spring recoil, and worksurface angle.

PubMed

You, Heecheon; Kumar, Anil; Young, Ronda; Veluswamy, Prabaharan; Malzahn, Don E

2005-09-01

The present study evaluated two design modifications (rubber grip and torsion spring) to the conventional manual Cleco pliers by electromyography (EMG), hand discomfort, and design satisfaction. This study also surveyed workers' satisfaction with selected design features of the pliers for ergonomic improvement. A two-way (plier design x worksurface angle) within-subject (nested within gender and hand size) design was employed. Eleven workers simulated the plier task in an adjustable workstation for different plier designs and worksurface angles (0 degrees , 60 degrees , and 90 degrees ). Lower EMG values were obtained for the pliers with rubber grip and at 60 degrees of worksurface angle. EMG values varied significantly between the participants, but showed low correlations (Spearman's rank correlation = -0.27 approximately -0.58) with their work experience with the pliers. The hand discomfort and design satisfaction evaluations identified that the grip span (max = 14.0 cm) and grip force requirement (peak = 220.5 N) of the current pliers need ergonomic modification. The present study shows the needs of both the ergonomic design of a hand tool and the training of a proper work method to control work-related musculoskeletal disorders at the workplace.

A framework for reporting on human factor/usability studies of health information technologies.

PubMed

Peute, Linda W; Driest, Keiko F; Marcilly, Romaric; Bras Da Costa, Sabrina; Beuscart-Zephir, Marie-Catherine; Jaspers, Monique W M

2013-01-01

Increasingly, studies are being published on the potential negative effect of introducing poor designed Health Information Technology (HIT) into clinical settings, relating to technology-induced errors and adverse events. Academic research on HIT design and evaluation is an extremely important source of information in providing new insights into factors contributing to successful system (re)design efforts, system user-friendliness and usability issues and safety critical aspects of HIT design. However, these studies have been inconsistent and incomprehensive in their reporting, complicating the appraisal of outcomes, generalizability of study findings, meta-analysis and harmonization of the available evidence. To improve identification of type of use errors and safety related issues regarding design and implementation of HIT, consensus on issues to be reported on in scientific publications is a necessary step forward. This study presents the first approach to a framework providing a set of principles to follow for comprehensive and unambiguous reporting of HIT design and usability evaluation studies with the objective to reduce variation, improve on the publication reporting quality and proper indexation of these studies. This framework may be helpful in expanding the knowledge base not only concerning the application of Human Factors (HF)/Usability studies of HIT but also improve the knowledge base of how to (re)design and implement effective, efficient and safe HIT.

Breckinridge Project, initial effort. Report XI, Volume V. Critical review of the design basis. [Critical review

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1982-01-01

Report XI, Technical Audit, is a compendium of research material used during the Initial Effort in making engineering comparisons and decisions. Volumes 4 and 5 of Report XI present those studies which provide a Critical Review of the Design Basis. The Critical Review Report, prepared by Intercontinental Econergy Associates, Inc., summarizes findings from an extensive review of the data base for the H-Coal process design. Volume 4 presents this review and assessment, and includes supporting material; specifically, Design Data Tabulation (Appendix A), Process Flow Sheets (Appendix B), and References (Appendix C). Volume 5 is a continuation of the references ofmore » Appendix C. Studies of a proprietary nature are noted and referenced, but are not included in these volumes. They are included in the Limited Access versions of these reports and may be reviewed by properly cleared personnel in the offices of Ashland Synthetic Fuels, Inc.« less

Design of clinical trials for new drugs in animals.

PubMed

Muser, R K

1980-05-15

Consideration of the intended purpose, an effort to ask specific questions that can be answered by specific data, selection of the correct values to be measured, and investigators who are able to conduct the study, will make it possible to design clinical studies properly. The ethical need to avoid unnecessary suffering of experimental animals and rules and regulations in effect at the time of clinical trials will dictate certain aspects of the design. The type of product to be evaluated, its mode of administration, the type of animal in which the drug will be used, the type of investigator who will collect the data, and the individual who will use the drug, will determine the mechanical part of the protocol. All of these factors need to be considered and discussed with all participants, which may include biostatisticians, regulatory authorities, investigators, and other individuals, to ensure that a rational design is chosen.

Design features of implants for direct skeletal attachment of limb prostheses

PubMed Central

Pitkin, M.

2013-01-01

In direct skeletal attachment (DSA) of limb prostheses, a construct is implanted into an amputee’s residuum bone and protrudes out of the residuum’s skin. This technology represents an alternative to traditional suspension of prostheses via various socket systems, with clear indications when the sockets cannot be properly fitted. Contemporary DSA was invented in the 1990s, and several implant systems have been introduced since then. The current review is intended to compare the design features of implants for DSA whose use in humans or in animal studies has been reported in the literature. PMID:23554122

Development and manufacture of visor for helmet-mounted display

NASA Astrophysics Data System (ADS)

Krevor, David H.; McNelly, Gregg; Skubon, John; Speirs, Robert

2004-01-01

The manufacturing design and process development for the Visor for the JHMCS (Joint Helmet Mounted Cueing System) are discussed. The JHMCS system is a Helmet Mounted Display (HMD) system currently flying on the F-15, F-16 and F/A-18 aircraft. The Visor manufacturing processes are essential to both system performance and economy. The Visor functions both as the system optical combiner and personal protective equipment for the pilot. The Visor material is optical polycarbonate. For a military HMD system, the mechanical and environmental properties of the Visor are as necessary as the optical properties. The visor must meet stringent dimensional requirements to assure adequate system optical performance. Injection molding can provide dimensional fidelity to the requirements, if done properly. Concurrent design of the visor and the tool (i.e., the injection mold) is essential. The concurrent design necessarily considers manufacturing operations and the use environment of the Visor. Computer modeling of the molding process is a necessary input to the mold design. With proper attention to product design and tool development, it is possible to improve upon published standard dimensional tolerances for molded polycarbonate articles.

Authentication techniques for smart cards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, R.A.

1994-02-01

Smart card systems are most cost efficient when implemented as a distributed system, which is a system without central host interaction or a local database of card numbers for verifying transaction approval. A distributed system, as such, presents special card and user authentication problems. Fortunately, smart cards offer processing capabilities that provide solutions to authentication problems, provided the system is designed with proper data integrity measures. Smart card systems maintain data integrity through a security design that controls data sources and limits data changes. A good security design is usually a result of a system analysis that provides a thoroughmore » understanding of the application needs. Once designers understand the application, they may specify authentication techniques that mitigate the risk of system compromise or failure. Current authentication techniques include cryptography, passwords, challenge/response protocols, and biometrics. The security design includes these techniques to help prevent counterfeit cards, unauthorized use, or information compromise. This paper discusses card authentication and user identity techniques that enhance security for microprocessor card systems. It also describes the analysis process used for determining proper authentication techniques for a system.« less

Optical Correlation of Images With Signal-Dependent Noise Using Constrained-Modulation Filter Devices

NASA Technical Reports Server (NTRS)

Downie, John D.

1995-01-01

Images with signal-dependent noise present challenges beyond those of images with additive white or colored signal-independent noise in terms of designing the optimal 4-f correlation filter that maximizes correlation-peak signal-to-noise ratio, or combinations of correlation-peak metrics. Determining the proper design becomes more difficult when the filter is to be implemented on a constrained-modulation spatial light modulator device. The design issues involved for updatable optical filters for images with signal-dependent film-grain noise and speckle noise are examined. It is shown that although design of the optimal linear filter in the Fourier domain is impossible for images with signal-dependent noise, proper nonlinear preprocessing of the images allows the application of previously developed design rules for optimal filters to be implemented on constrained-modulation devices. Thus the nonlinear preprocessing becomes necessary for correlation in optical systems with current spatial light modulator technology. These results are illustrated with computer simulations of images with signal-dependent noise correlated with binary-phase-only filters and ternary-phase-amplitude filters.

Evaluation of a Web-based Error Reporting Surveillance System in a Large Iranian Hospital.

PubMed

Askarian, Mehrdad; Ghoreishi, Mahboobeh; Akbari Haghighinejad, Hourvash; Palenik, Charles John; Ghodsi, Maryam

2017-08-01

Proper reporting of medical errors helps healthcare providers learn from adverse incidents and improve patient safety. A well-designed and functioning confidential reporting system is an essential component to this process. There are many error reporting methods; however, web-based systems are often preferred because they can provide; comprehensive and more easily analyzed information. This study addresses the use of a web-based error reporting system. This interventional study involved the application of an in-house designed "voluntary web-based medical error reporting system." The system has been used since July 2014 in Nemazee Hospital, Shiraz University of Medical Sciences. The rate and severity of errors reported during the year prior and a year after system launch were compared. The slope of the error report trend line was steep during the first 12 months (B = 105.727, P = 0.00). However, it slowed following launch of the web-based reporting system and was no longer statistically significant (B = 15.27, P = 0.81) by the end of the second year. Most recorded errors were no-harm laboratory types and were due to inattention. Usually, they were reported by nurses and other permanent employees. Most reported errors occurred during morning shifts. Using a standardized web-based error reporting system can be beneficial. This study reports on the performance of an in-house designed reporting system, which appeared to properly detect and analyze medical errors. The system also generated follow-up reports in a timely and accurate manner. Detection of near-miss errors could play a significant role in identifying areas of system defects.

Some folded issues related to over-shielded and unplanned rooms for medical linear accelerators - A case study

NASA Astrophysics Data System (ADS)

Muhammad, Wazir; Ullah, Asad; Hussain, Amjad; Ali, Nawab; Alam, Khan; Khan, Gulzar; Matiullah; Maeng, Seongjin; Lee, Sang Hoon

2015-08-01

A medical linear accelerator (LINAC) room must be properly shielded to limit the outside radiation exposure to an acceptable safe level defined by individual state and international regulations. However, along with this prime objective, some additional issues are also important. The current case-study was designed to unfold the issues related to over-shielded and unplanned treatment rooms for LINACs. In this connection, an apparently unplanned and over-shielded treatment room of 610 × 610 cm2 in size was compared with a properly designed treatment room of 762 × 762 cm2 in size ( i.e., by following the procedures and recommendations of the IAEA Safety Reports Series No. 47 and NCRP 151). Evaluation of the unplanned room indicated that it was over-shielded and that its size was not suitable for total body irradiation (TBI), although the license for such a treatment facility had been acquired for the installed machine. An overall 14.96% reduction in the total shielding volume ( i.e., concrete) for an optimally planned room as compared to a non-planned room was estimated. Furthermore, the inner room's dimensions were increased by 25%, in order to accommodate TBI patients. These results show that planning and design of the treatment rooms are imperative to avoid extra financial burden to the hospitals and to provide enough space for easy and safe handling of the patients. A spacious room is ideal for storing treatment accessories and facilitates TBI treatment.

Computational Investigation of the NASA Cascade Cyclonic Separation Device

NASA Technical Reports Server (NTRS)

Hoyt, Nathaniel C.; Kamotani, Yasuhiro; Kadambi, Jaikrishnan; McQuillen, John B.; Sankovic, John M.

2008-01-01

Devices designed to replace the absent buoyancy separation mechanism within a microgravity environment are of considerable interest to NASA as the functionality of many spacecraft systems are dependent on the proper sequestration of interpenetrating gas and liquid phases. Inasmuch, a full multifluid Euler-Euler computational fluid dynamics investigation has been undertaken to evaluate the performance characteristics of one such device, the Cascade Cyclonic Separator, across a full range of inlet volumetric quality with combined volumetric injection rates varying from 1 L/min to 20 L/min. These simulations have delimited the general modes of operation of this class of devices and have proven able to describe the complicated vortex structure and induced pressure gradients that arise. The computational work has furthermore been utilized to analyze design modifications that enhance the overall performance of these devices. The promising results indicate that proper CFD modeling may be successfully used as a tool for microgravity separator design.

Feasibility of BNCT radiobiological experiments at the HYTHOR facility

NASA Astrophysics Data System (ADS)

Esposito, J.; Ceballos, C.; Soncin, M.; Fabris, C.; Friso, E.; Moro, D.; Colautti, P.; Jori, G.; Rosi, G.; Nava, E.

2008-06-01

HYTHOR (HYbrid Thermal spectrum sHifter tapirO Reactor) is a new thermal-neutron irradiation facility, which was installed and became operative in mid 2005 at the TAPIRO (TAratura PIla Rapida potenza 0) fast reactor, in the Casaccia research centre (near Rome) of ENEA (Ente per le Nuove tecnologie Energia ed Ambiente). The facility has been designed for in vivo radiobiological studies. In HYTHOR irradiation cavity, 1-6 mice can be simultaneously irradiated to study skin melanoma treatments with the BNCT (boron neutron capture therapy). The therapeutic effects of HYTHOR radiation field on mouse melanoma has been studied as a preliminary investigation before studying the tumour local control due to boron neutron capture effect after boronated molecule injection. The method to properly irradiate small animals has been precisely defined. Results show that HYTHOR radiation field is by itself effective in reducing the tumour-growth rate. This finding has to be taken into account in studying the effectiveness of new 10B carriers. A method to properly measure the reduction of the tumour-growth rate is reported and discussed.

External model validation of binary clinical risk prediction models in cardiovascular and thoracic surgery.

PubMed

Hickey, Graeme L; Blackstone, Eugene H

2016-08-01

Clinical risk-prediction models serve an important role in healthcare. They are used for clinical decision-making and measuring the performance of healthcare providers. To establish confidence in a model, external model validation is imperative. When designing such an external model validation study, thought must be given to patient selection, risk factor and outcome definitions, missing data, and the transparent reporting of the analysis. In addition, there are a number of statistical methods available for external model validation. Execution of a rigorous external validation study rests in proper study design, application of suitable statistical methods, and transparent reporting. Copyright © 2016 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

Tests of oil scraper piston ring and piston fitted with oil drain holes

NASA Technical Reports Server (NTRS)

Mcdewell, H S

1922-01-01

Tests were conducted to determine whether or not a properly located and properly designed oil scraper piston ring, installed on a piston provided with oil drain holes of sufficient area, would prevent the excessive oiling of the Liberty engine, particularly with the engine running at idling speed with full oil pressure. Results showed that excessive oiling was in fact prevented. It is strongly recommended that scraper rings and pistons be adopted for aircraft engines.

Turbopump systems for liquid rocket engines

NASA Technical Reports Server (NTRS)

1974-01-01

The turbopump system, from preliminary design through rocket engine testing is examined. Selection of proper system type for each application and integration of the components into a working system are dealt with. Details are also given on the design of various components including inducers, pumps, turbines, gears, and bearings.

Evaluation of drainage pipe by field experimentation and supplemental laboratory experimentation : interim report No. 2.

DOT National Transportation Integrated Search

1978-03-01

Louisiana's Office of Highways reacts to a major problem when it attempts to shape and control drainage patterns along its right-of-ways. The Office's design engineers meet this challenge through proper section design and appropriate application of d...

Evaluation of drainage pipe by field experimentation and supplemental laboratory experimentation : interim report No. 1.

DOT National Transportation Integrated Search

1977-03-01

Louisiana's Office of Highways reacts to a major problem when it attempts to shape and control drainage patterns along its right-of-ways. The Office's design engineers meet this challenge through proper section design and appropriate application of d...

19 CFR 122.11 - Designation as international airport.

Code of Federal Regulations, 2010 CFR

2010-04-01

...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Classes of Airports § 122.11 Designation as international... useful. (c) Providing office space to the Federal Government. Each international airport shall provide, without cost to the Federal Government, proper office and other space for the sole use of Federal...

19 CFR 122.11 - Designation as international airport.

Code of Federal Regulations, 2011 CFR

2011-04-01

...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Classes of Airports § 122.11 Designation as international... useful. (c) Providing office space to the Federal Government. Each international airport shall provide, without cost to the Federal Government, proper office and other space for the sole use of Federal...

19 CFR 122.11 - Designation as international airport.

Code of Federal Regulations, 2013 CFR

2013-04-01

...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Classes of Airports § 122.11 Designation as international... useful. (c) Providing office space to the Federal Government. Each international airport shall provide, without cost to the Federal Government, proper office and other space for the sole use of Federal...

19 CFR 122.11 - Designation as international airport.

Code of Federal Regulations, 2012 CFR

2012-04-01

...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Classes of Airports § 122.11 Designation as international... useful. (c) Providing office space to the Federal Government. Each international airport shall provide, without cost to the Federal Government, proper office and other space for the sole use of Federal...

19 CFR 122.11 - Designation as international airport.

Code of Federal Regulations, 2014 CFR

2014-04-01

...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Classes of Airports § 122.11 Designation as international... useful. (c) Providing office space to the Federal Government. Each international airport shall provide, without cost to the Federal Government, proper office and other space for the sole use of Federal...

30 CFR 19.7 - Protection against explosion hazard.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC CAP LAMPS § 19.7 Protection against explosion hazard. Unless properly designed, electric cap lamps may present two sources of probable explosion hazards..., if the lamp is designed and constructed to prevent the ignition of explosive mixtures of methane and...

30 CFR 19.7 - Protection against explosion hazard.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC CAP LAMPS § 19.7 Protection against explosion hazard. Unless properly designed, electric cap lamps may present two sources of probable explosion hazards..., if the lamp is designed and constructed to prevent the ignition of explosive mixtures of methane and...

30 CFR 19.7 - Protection against explosion hazard.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC CAP LAMPS § 19.7 Protection against explosion hazard. Unless properly designed, electric cap lamps may present two sources of probable explosion hazards..., if the lamp is designed and constructed to prevent the ignition of explosive mixtures of methane and...

30 CFR 19.7 - Protection against explosion hazard.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC CAP LAMPS § 19.7 Protection against explosion hazard. Unless properly designed, electric cap lamps may present two sources of probable explosion hazards..., if the lamp is designed and constructed to prevent the ignition of explosive mixtures of methane and...

On-farm irrigatrion system design and operation

USDA-ARS?s Scientific Manuscript database

Most commercial blueberry fields are irrigated by overhead sprinklers or drip. Water is typically applied one to two times per week as needed with sprinklers, and every one to three days with drip. Sprinkler systems are relatively simple to install and maintain, and when designed properly, obtain re...

14 CFR 23.1351 - General.

Code of Federal Regulations, 2013 CFR

2013-01-01

.../alternator. (5) Each generator/alternator must have an overvoltage control designed and installed to prevent... control and protective devices, must be able to furnish the required power at the proper voltage to each... detrimental substances, and mechanical damage; and (iii) So designed that the risk of electrical shock to crew...

14 CFR 23.1351 - General.

Code of Federal Regulations, 2011 CFR

2011-01-01

.../alternator. (5) Each generator/alternator must have an overvoltage control designed and installed to prevent... control and protective devices, must be able to furnish the required power at the proper voltage to each... detrimental substances, and mechanical damage; and (iii) So designed that the risk of electrical shock to crew...

14 CFR 23.1351 - General.

Code of Federal Regulations, 2014 CFR

2014-01-01

.../alternator. (5) Each generator/alternator must have an overvoltage control designed and installed to prevent... control and protective devices, must be able to furnish the required power at the proper voltage to each... detrimental substances, and mechanical damage; and (iii) So designed that the risk of electrical shock to crew...

14 CFR 23.1351 - General.

Code of Federal Regulations, 2012 CFR

2012-01-01

.../alternator. (5) Each generator/alternator must have an overvoltage control designed and installed to prevent... control and protective devices, must be able to furnish the required power at the proper voltage to each... detrimental substances, and mechanical damage; and (iii) So designed that the risk of electrical shock to crew...

14 CFR 23.1351 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

.../alternator. (5) Each generator/alternator must have an overvoltage control designed and installed to prevent... control and protective devices, must be able to furnish the required power at the proper voltage to each... detrimental substances, and mechanical damage; and (iii) So designed that the risk of electrical shock to crew...

Locker-Room Talk.

ERIC Educational Resources Information Center

Lowe, Jason; Noyes, Brad

1999-01-01

Explains how proper athletic facility locker-room design can save time and money. Design factors that address who will be using the facility are discussed as are user requirements, such as preparation areas, total storage area per user, grooming area, and security areas. Final comments address maintenance and operations issues. (GR)

Influence of cross-phase modulation in SPM-based nonlinear optical loop mirror

NASA Astrophysics Data System (ADS)

Pitois, Stéphane

2005-09-01

We study the role of cross-phase modulation (CPM) occurring between the two counter-propagating parts of a signal wave in a standard SPM-based nonlinear optical fiber loop mirror (NOLM). For pulse train with high duty-cycle, we experimentally observe the influence of cross-phase modulation on NOLM transmittivity. Finally, we propose a solution based on properly designed dispersion imbalanced NOLM to overcome undesirable CPM effects.

A Chemical-Medical Mystery: Gold Jewelry and Black Marks on Skin

NASA Astrophysics Data System (ADS)

Kebbekus, Barbara B.

2000-10-01

Gold jewelry at times makes a black mark or smudge on skin. This may be caused by abrasive powders on the skin (e.g. zinc oxide) but the phenomenon may also be caused by other skin conditions, possibly the presence of chloride ion, acidity, or sulfur-containing amino acids. Some anecdotal evidence is published, but properly designed studies to clarify the actual causes are not available.

Multiobjective optimization techniques for structural design

NASA Technical Reports Server (NTRS)

Rao, S. S.

1984-01-01

The multiobjective programming techniques are important in the design of complex structural systems whose quality depends generally on a number of different and often conflicting objective functions which cannot be combined into a single design objective. The applicability of multiobjective optimization techniques is studied with reference to simple design problems. Specifically, the parameter optimization of a cantilever beam with a tip mass and a three-degree-of-freedom vabration isolation system and the trajectory optimization of a cantilever beam are considered. The solutions of these multicriteria design problems are attempted by using global criterion, utility function, game theory, goal programming, goal attainment, bounded objective function, and lexicographic methods. It has been observed that the game theory approach required the maximum computational effort, but it yielded better optimum solutions with proper balance of the various objective functions in all the cases.

Design and development of Hoeken's structural dynamic linkage based agro-tiller machine

NASA Astrophysics Data System (ADS)

Hynes, N. Rajesh Jesudoss; Saran, K.; Pavithran, V.

2018-05-01

India is one of biggest exporters of medicinal plants, spices and other many agro products in the world. Owing to the special needs, an agricultural machine is designed using Hoeken linkage with Pantograph mechanism and developed that ensures safety digging to uproot the plant. Thus, the focus is to cut the plant by machine with proper care and shoot system is cut properly avoiding any damage to the upper part of the plant and rather be cut in the root area to use it. This is done by the agricultural cutting machine by the name "agricultural tiller machine" that can perform the action same as the objective needed for the effective production of raw materials for manufacturing of the agro products.

A Method for Computing Leading-Edge Loads

NASA Technical Reports Server (NTRS)

Rhode, Richard V; Pearson, Henry A

1933-01-01

In this report a formula is developed that enables the determination of the proper design load for the portion of the wing forward of the front spar. The formula is inherently rational in concept, as it takes into account the most important variables that affect the leading-edge load, although theoretical rigor has been sacrificed for simplicity and ease of application. Some empirical corrections, based on pressure distribution measurements on the PW-9 and M-3 airplanes have been introduced to provide properly for biplanes. Results from the formula check experimental values in a variety of cases with good accuracy in the critical loading conditions. The use of the method for design purposes is therefore felt to be justified and is recommended.

Designing Adaptive Low Dissipative High Order Schemes

NASA Technical Reports Server (NTRS)

Yee, H. C.; Sjoegreen, B.; Parks, John W. (Technical Monitor)

2002-01-01

Proper control of the numerical dissipation/filter to accurately resolve all relevant multiscales of complex flow problems while still maintaining nonlinear stability and efficiency for long-time numerical integrations poses a great challenge to the design of numerical methods. The required type and amount of numerical dissipation/filter are not only physical problem dependent, but also vary from one flow region to another. This is particularly true for unsteady high-speed shock/shear/boundary-layer/turbulence/acoustics interactions and/or combustion problems since the dynamics of the nonlinear effect of these flows are not well-understood. Even with extensive grid refinement, it is of paramount importance to have proper control on the type and amount of numerical dissipation/filter in regions where it is needed.

Design Recommendations for Query Languages

DTIC Science & Technology

1980-09-01

DESIGN RECOMMENDATIONS FOR QUERY LANGUAGES S.L. Ehrenreich Submitted by: Stanley M. Halpin, Acting Chief HUMAN FACTORS TECHNICAL AREA Approved by: Edgar ...respond to que- ries that it recognizes as faulty. Codd (1974) states that in designing a nat- ural query language, attention must be given to dealing...impaired. Codd (1974) also regarded the user’s perception of the data base to be of critical importance in properly designing a query language system

Design of MSR primary circuit with minimum pressure losses

NASA Astrophysics Data System (ADS)

Noga, Tomáš; Žitek, Pavel; Valenta, Václav

This article describes a design of a MSR primary circuit with minimum pressure losses. It includes a brief description of this type of a reactor and its integral layout, properties, purpose, etc. The objective of this paper is to define problems of pressure losses calculation and to design a proper device for a primary circuit of MSR reactor, including its basic dimensions. Thanks to this, it can become an initial project for a construction of a real piece of work. This is the main contribution of the carried out study. Of course, this article is not a detailed solution, but it points out facts and problems, which future designers may have to face. The further step of our work will be a reconstruction of the current experiment for a two-stage flowing.

Proper Plugin Protocols

DTIC Science & Technology

2011-12-28

specify collaboration constraints that occur in Java and XML frameworks and that the collaboration constraints from these frameworks matter in practice. (a...programming language boundaries, and Chapter 6 and Appendix A demonstrate that Fusion can specify constraints across both Java and XML in practice. (c...designed JUnit, Josh Bloch designed Java Collec- tions, and Krzysztof Cwalina designed the .NET Framework APIs. While all of these frameworks are very

The Role of Human Error in Design, Construction, and Reliability of Marine Structures.

DTIC Science & Technology

1994-10-01

The 1979 Three Mile Island nuclear plant accident was largely a result of a failure to properly sort out and recognize critically important information...determinating the goals and objectives of the program and by evaluating and interpreting the results in terms of structural design, construction, and...67 Checking Models in Structural Design ....................................... 69 Nuclear Power Plants

Pipelined CPU Design with FPGA in Teaching Computer Architecture

ERIC Educational Resources Information Center

Lee, Jong Hyuk; Lee, Seung Eun; Yu, Heon Chang; Suh, Taeweon

2012-01-01

This paper presents a pipelined CPU design project with a field programmable gate array (FPGA) system in a computer architecture course. The class project is a five-stage pipelined 32-bit MIPS design with experiments on the Altera DE2 board. For proper scheduling, milestones were set every one or two weeks to help students complete the project on…

Human Engineering of Space Vehicle Displays and Controls

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; Holden, Kritina L.; Boyer, Jennifer; Stephens, John-Paul; Ezer, Neta; Sandor, Aniko

2010-01-01

Proper attention to the integration of the human needs in the vehicle displays and controls design process creates a safe and productive environment for crew. Although this integration is critical for all phases of flight, for crew interfaces that are used during dynamic phases (e.g., ascent and entry), the integration is particularly important because of demanding environmental conditions. This panel addresses the process of how human engineering involvement ensures that human-system integration occurs early in the design and development process and continues throughout the lifecycle of a vehicle. This process includes the development of requirements and quantitative metrics to measure design success, research on fundamental design questions, human-in-the-loop evaluations, and iterative design. Processes and results from research on displays and controls; the creation and validation of usability, workload, and consistency metrics; and the design and evaluation of crew interfaces for NASA's Crew Exploration Vehicle are used as case studies.

Specifications of a continual reassessment method design for phase I trials of combined drugs†

PubMed Central

Wages, Nolan A.; Conaway, Mark R.

2013-01-01

In studies of combinations of agents in phase I oncology trials, the dose–toxicity relationship may not be monotone for all combinations, in which case the toxicity probabilities follow a partial order. The continual reassessment method for partial orders (PO-CRM) is a design for phase I trials of combinations that leans upon identifying possible complete orders associated with the partial order. This article addresses some practical design considerations not previously undertaken when describing the PO-CRM. We describe an approach in choosing a proper subset of possible orderings, formulated according to the known toxicity relationships within a matrix of combination therapies. Other design issues, such as working model selection and stopping rules, are also discussed. We demonstrate the practical ability of PO-CRM as a phase I design for combinations through its use in a recent trial designed at the University of Virginia Cancer Center. PMID:23729323

High speed civil transport

NASA Technical Reports Server (NTRS)

1991-01-01

This report discusses the design and marketability of a next generation supersonic transport. Apogee Aeronautics Corporation has designated its High Speed Civil Transport (HSCT): Supercruiser HS-8. Since the beginning of the Concorde era, the general consensus has been that the proper time for the introduction of a next generation Supersonic Transport (SST) would depend upon the technical advances made in the areas of propulsion (reduction in emissions) and material composites (stronger, lighter materials). It is believed by many in the aerospace industry that these beforementioned technical advances lie on the horizon. With this being the case, this is the proper time to begin the design phase for the next generation HSCT. The design objective for a HSCT was to develop an aircraft that would be capable of transporting at least 250 passengers with baggage at a distance of 5500 nmi. The supersonic Mach number is currently unspecified. In addition, the design had to be marketable, cost effective, and certifiable. To achieve this goal, technical advances in the current SST's must be made, especially in the areas of aerodynamics and propulsion. As a result of these required aerodynamic advances, several different supersonic design concepts were reviewed.

Sampling designs for HIV molecular epidemiology with application to Honduras.

PubMed

Shepherd, Bryan E; Rossini, Anthony J; Soto, Ramon Jeremias; De Rivera, Ivette Lorenzana; Mullins, James I

2005-11-01

Proper sampling is essential to characterize the molecular epidemiology of human immunodeficiency virus (HIV). HIV sampling frames are difficult to identify, so most studies use convenience samples. We discuss statistically valid and feasible sampling techniques that overcome some of the potential for bias due to convenience sampling and ensure better representation of the study population. We employ a sampling design called stratified cluster sampling. This first divides the population into geographical and/or social strata. Within each stratum, a population of clusters is chosen from groups, locations, or facilities where HIV-positive individuals might be found. Some clusters are randomly selected within strata and individuals are randomly selected within clusters. Variation and cost help determine the number of clusters and the number of individuals within clusters that are to be sampled. We illustrate the approach through a study designed to survey the heterogeneity of subtype B strains in Honduras.

Implicit structured sequence learning: an fMRI study of the structural mere-exposure effect

PubMed Central

Folia, Vasiliki; Petersson, Karl Magnus

2014-01-01

In this event-related fMRI study we investigated the effect of 5 days of implicit acquisition on preference classification by means of an artificial grammar learning (AGL) paradigm based on the structural mere-exposure effect and preference classification using a simple right-linear unification grammar. This allowed us to investigate implicit AGL in a proper learning design by including baseline measurements prior to grammar exposure. After 5 days of implicit acquisition, the fMRI results showed activations in a network of brain regions including the inferior frontal (centered on BA 44/45) and the medial prefrontal regions (centered on BA 8/32). Importantly, and central to this study, the inclusion of a naive preference fMRI baseline measurement allowed us to conclude that these fMRI findings were the intrinsic outcomes of the learning process itself and not a reflection of a preexisting functionality recruited during classification, independent of acquisition. Support for the implicit nature of the knowledge utilized during preference classification on day 5 come from the fact that the basal ganglia, associated with implicit procedural learning, were activated during classification, while the medial temporal lobe system, associated with explicit declarative memory, was consistently deactivated. Thus, preference classification in combination with structural mere-exposure can be used to investigate structural sequence processing (syntax) in unsupervised AGL paradigms with proper learning designs. PMID:24550865

Implicit structured sequence learning: an fMRI study of the structural mere-exposure effect.

PubMed

Folia, Vasiliki; Petersson, Karl Magnus

2014-01-01

In this event-related fMRI study we investigated the effect of 5 days of implicit acquisition on preference classification by means of an artificial grammar learning (AGL) paradigm based on the structural mere-exposure effect and preference classification using a simple right-linear unification grammar. This allowed us to investigate implicit AGL in a proper learning design by including baseline measurements prior to grammar exposure. After 5 days of implicit acquisition, the fMRI results showed activations in a network of brain regions including the inferior frontal (centered on BA 44/45) and the medial prefrontal regions (centered on BA 8/32). Importantly, and central to this study, the inclusion of a naive preference fMRI baseline measurement allowed us to conclude that these fMRI findings were the intrinsic outcomes of the learning process itself and not a reflection of a preexisting functionality recruited during classification, independent of acquisition. Support for the implicit nature of the knowledge utilized during preference classification on day 5 come from the fact that the basal ganglia, associated with implicit procedural learning, were activated during classification, while the medial temporal lobe system, associated with explicit declarative memory, was consistently deactivated. Thus, preference classification in combination with structural mere-exposure can be used to investigate structural sequence processing (syntax) in unsupervised AGL paradigms with proper learning designs.

Towards a Framework for Professional Curriculum Design

ERIC Educational Resources Information Center

Winch, Christopher

2015-01-01

Recent reviews of vocational qualifications in England have noted problems with their restricted nature. However, the underlying issue of how to conceptualise professional agency in curriculum design has not been properly addressed, either by the Richard or the Whitehead reviews. Drawing on comparative work in England and Europe it is argued that…

40 CFR 35.2050 - Effect of approval or certification of documents.

Code of Federal Regulations, 2010 CFR

2010-07-01

... OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works § 35.2050 Effect of approval or certification of documents. Review or approval of facilities plans, design drawings... relieve the grantee of its responsibility to properly plan, design, build and effectively operate and...

Collaborative Learning in Higher Education: Lecturers' Practices and Beliefs

ERIC Educational Resources Information Center

De Hei, Miranda Suzanna Angelique; Strijbos, Jan-Willem; Sjoer, Ellen; Admiraal, Wilfried

2015-01-01

Collaborative learning can, if designed and implemented properly, contribute to student learning outcomes and prepare them for teamwork. However, the design and implementation of collaborative learning in practice depend on beliefs of lecturers about teaching and learning in general, and collaborative learning in particular. One hundred and…

41 CFR 60-3.1 - Statement of purpose.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Purpose of guidelines. These guidelines incorporate a single set of principles which are designed to... race, color, religion, sex, and national origin. They are designed to provide a framework for determining the proper use of tests and other selection procedures. These guidelines do not require a user to...

41 CFR 60-3.1 - Statement of purpose.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... Purpose of guidelines. These guidelines incorporate a single set of principles which are designed to... race, color, religion, sex, and national origin. They are designed to provide a framework for determining the proper use of tests and other selection procedures. These guidelines do not require a user to...

41 CFR 60-3.1 - Statement of purpose.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Purpose of guidelines. These guidelines incorporate a single set of principles which are designed to... race, color, religion, sex, and national origin. They are designed to provide a framework for determining the proper use of tests and other selection procedures. These guidelines do not require a user to...

41 CFR 60-3.1 - Statement of purpose.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Purpose of guidelines. These guidelines incorporate a single set of principles which are designed to... race, color, religion, sex, and national origin. They are designed to provide a framework for determining the proper use of tests and other selection procedures. These guidelines do not require a user to...

25 CFR 542.15 - What are the minimum internal control standards for credit?

Code of Federal Regulations, 2014 CFR

2014-04-01

...) Documentation of authorization by a person designated by management to approve credit limits; and (v) Credit... approved by personnel designated by management. (4) Proper approval of credit extensions over ten percent... that require access and are so authorized by management; (ii) Outstanding credit instruments shall be...

25 CFR 542.15 - What are the minimum internal control standards for credit?

Code of Federal Regulations, 2013 CFR

2013-04-01

...) Documentation of authorization by a person designated by management to approve credit limits; and (v) Credit... approved by personnel designated by management. (4) Proper approval of credit extensions over ten percent... that require access and are so authorized by management; (ii) Outstanding credit instruments shall be...

25 CFR 542.15 - What are the minimum internal control standards for credit?

Code of Federal Regulations, 2012 CFR

2012-04-01

...) Documentation of authorization by a person designated by management to approve credit limits; and (v) Credit... approved by personnel designated by management. (4) Proper approval of credit extensions over ten percent... that require access and are so authorized by management; (ii) Outstanding credit instruments shall be...

25 CFR 542.15 - What are the minimum internal control standards for credit?

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Documentation of authorization by a person designated by management to approve credit limits; and (v) Credit... approved by personnel designated by management. (4) Proper approval of credit extensions over ten percent... that require access and are so authorized by management; (ii) Outstanding credit instruments shall be...

25 CFR 542.15 - What are the minimum internal control standards for credit?

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Documentation of authorization by a person designated by management to approve credit limits; and (v) Credit... approved by personnel designated by management. (4) Proper approval of credit extensions over ten percent... that require access and are so authorized by management; (ii) Outstanding credit instruments shall be...

47 CFR 78.51 - Remote control operation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... control system shall be installed and protected in a manner designed to prevent tampering or operation by... transmissions and a carrier operated device which will give a continuous visual indication whenever the... necessary to insure proper operation. (4) The control circuits shall be so designed and installed that short...

47 CFR 78.51 - Remote control operation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... control system shall be installed and protected in a manner designed to prevent tampering or operation by... transmissions and a carrier operated device which will give a continuous visual indication whenever the... necessary to insure proper operation. (4) The control circuits shall be so designed and installed that short...

Universal design characteristic on themed streets

NASA Astrophysics Data System (ADS)

Harsritanto, Bangun IR; Indriastjario; Wijayanti

2017-12-01

People around the world can access the streets to fulfil their daily activities regardless of their gender, age, and abilities. The streetscape is an urban public space which is built to facilitate the basic needs of people as social being. The themed street is an urban streetscape designed and built in detail with a theme or special purpose in an of urban development process. Universal design facilitates the full range of human diversity as physical appearance, perception, cognitive abilities, sizes, and shapes. By designing for the diversity, the specialized streets become more functional and user-friendly. The purpose of this study is to examine several design characteristics of themed streets in several countries from three different continents using universal design principles for giving proper directions to develop more user-friendly streets. Literature review and case study were used as research methods. The literature review was extracted and compiled from manuscripts, streetscape design books, and from universal design principles. Furthermore, the constructed theory were used to examine the case studies of themed streets. The findings indicated that themed streets’ character design were strongly influenced by local cultural aspect even though the basic guidelines were universal design principles; the resumed design direction can be suggested universal along with the richness of local aspects.

Face-gear drives: Design, analysis, and testing for helicopter transmission applications

NASA Technical Reports Server (NTRS)

Litvin, F. L.; Wang, J.-C.; Bossler, R. B., Jr.; Chen, Y.-J. D.; Heath, G.; Lewicki, D. G.

1992-01-01

The use of face-gears in helicopter transmissions was explored. A light-weight, split-torque transmission design utilizing face-gears is described. Face-gear design and geometry were investigated. Topics included tooth generation, limiting inner and outer radii, tooth contact analysis, contact ratio, gear eccentricity, grinding, and structural stiffness. Design charts were developed to determine minimum and maximum face-gear inner and outer radii. An analytical study showed that the face-gear drive is relatively insensitive to gear misalignment with respect to transmission errors, but the tooth contact is affected by misalignment. A method of localizing the bearing contact to permit operation with misalignment was explored. Two new methods for grinding of the face-gear tooth surfaces were also investigated. The proper choice of shaft stiffness enabled good load sharing in the split-torque transmission design. Face-gear experimental studies were also conducted. These tests demonstrated the feasibility of face-gears in high-speed, high-load applications such as helicopter transmissions.

Coach design for the Korean high-speed train: a systematic approach to passenger seat design and layout.

PubMed

Jung, E S; Han, S H; Jung, M; Choe, J

1998-12-01

Proper ergonomic design of a passenger seat and coach layout for a high-speed train is an essential component that is directly related to passenger comfort. In this research, a systematic approach to the design of passenger seats was described and the coach layout which reflected the tradeoff between transportation capacity and passenger comfort was investigated for the Korean high-speed train. As a result, design recommendations and specifications of the passenger seat and its layout were suggested. The whole design process is composed of four stages. A survey and analysis of design requirement was first conducted, which formed the base for designing the first and second class passenger seats. Prototypes were made and evaluated iteratively, and seat arrangement and coach layout were finally obtained. The systematic approach and recommendations suggested in this study are expected to be applicable to the seat design for public transportations and to help modify and redesign existing vehicular seats.

Design of an autonomous lunar construction utility vehicle

NASA Technical Reports Server (NTRS)

1990-01-01

In order to prepare a site for a lunar base, an autonomously operated construction vehicle is necessary. Discussed here is a Lunar Construction Utility Vehicle (LCUV), which uses interchangeable construction implements. Design of an elastic loop track system has advanced to the testing stage. A standard coupling device has been designed to insure a proper connection between the different construction tools and the LCUV. Autonomous control of the track drive motors was simulated successfully through the use of a joystick and a computer interface. A study of hydrogen-oxygen fuel cells produced estimates of reactant and product requirements and identified multilayer insulation needs. Research on the 100-kW heat rejection system determined that it is necessary to transport the radiator panel on a utility trailer. Extensive logistical support for the 720 hour use cycle requires further study.

Radiation exposure from fluoroscopy during orthopedic surgical procedures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riley, S.A.

1989-11-01

The use of fluoroscopy has enabled orthopedic surgeons to become technically more proficient. In addition, these surgical procedures tend to have less associated patient morbidity by decreasing operative time and minimizing the area of the operative field. The trade-off, however, may be an increased risk of radiation exposure to the surgeon on an annual or lifetime basis. The current study was designed to determine the amount of radiation received by the primary surgeon and the first assistant during selected surgical procedures involving the use of fluoroscopy. Five body sites exposed to radiation were monitored for dosage. The results of thismore » study indicate that with appropriate usage, (1) radiation exposure from fluoroscopy is relatively low; (2) the surgeon's dominant hand receives the most exposure per case; and (3) proper maintenance and calibration of fluoroscopic machines are important factors in reducing exposure risks. Therefore, with proper precautions, the use of fluoroscopy in orthopedic procedures can remain a safe practice.« less

Finite element analysis of a composite wheelchair wheel design

NASA Technical Reports Server (NTRS)

Ortega, Rene

1994-01-01

The finite element analysis of a composite wheelchair wheel design is presented. The design is the result of a technology utilization request. The designer's intent is to soften the riding feeling by incorporating a mechanism attaching the wheel rim to the spokes that would allow considerable deflection upon compressive loads. A finite element analysis was conducted to verify proper structural function. Displacement and stress results are presented and conclusions are provided.

Space Station Furnace Facility. Volume 2: Requirements Definition and Conceptual Design Study. Appendix 3: Environment Analysis. Volume 2; Appendix 3

NASA Technical Reports Server (NTRS)

1992-01-01

A Preliminary Safety Analysis (PSA) is being accomplished as part of the Space Station Furnace Facility (SSFF) contract. This analysis is intended to support SSFF activities by analyzing concepts and designs as they mature to develop essential safety requirements for inclusion in the appropriate specifications, and designs, as early as possible. In addition, the analysis identifies significant safety concerns that may warrant specific trade studies or design definition, etc. The analysis activity to date concentrated on hazard and hazard cause identification and requirements development with the goal of developing a baseline set of detailed requirements to support trade study, specifications development, and preliminary design activities. The analysis activity will continue as the design and concepts mature. Section 2 defines what was analyzed, but it is likely that the SSFF definitions will undergo further changes. The safety analysis activity will reflect these changes as they occur. The analysis provides the foundation for later safety activities. The hazards identified will in most cases have Preliminary Design Review (PDR) applicability. The requirements and recommendations developed for each hazard will be tracked to ensure proper and early resolution of safety concerns.

Biomarker discovery study design for type 1 diabetes in The Environmental Determinants of Diabetes in the Young (TEDDY) study.

PubMed

Lee, Hye-Seung; Burkhardt, Brant R; McLeod, Wendy; Smith, Susan; Eberhard, Chris; Lynch, Kristian; Hadley, David; Rewers, Marian; Simell, Olli; She, Jin-Xiong; Hagopian, Bill; Lernmark, Ake; Akolkar, Beena; Ziegler, Anette G; Krischer, Jeffrey P

2014-07-01

The Environmental Determinants of Diabetes in the Young planned biomarker discovery studies on longitudinal samples for persistent confirmed islet cell autoantibodies and type 1 diabetes using dietary biomarkers, metabolomics, microbiome/viral metagenomics and gene expression. This article describes the details of planning The Environmental Determinants of Diabetes in the Young biomarker discovery studies using a nested case-control design that was chosen as an alternative to the full cohort analysis. In the frame of a nested case-control design, it guides the choice of matching factors, selection of controls, preparation of external quality control samples and reduction of batch effects along with proper sample allocation. Our design is to reduce potential bias and retain study power while reducing the costs by limiting the numbers of samples requiring laboratory analyses. It also covers two primary end points (the occurrence of diabetes-related autoantibodies and the diagnosis of type 1 diabetes). The resulting list of case-control matched samples for each laboratory was augmented with external quality control samples. Copyright © 2013 John Wiley & Sons, Ltd.

The Moisture Menace.

ERIC Educational Resources Information Center

Chivetta, Christopher

2001-01-01

Discusses how to control an indoor pool environment by understanding the mechanics of water evaporation, condensation, and migration. Stresses the need for a properly designed, installed, operated, and maintained mechanical system. (GR)

Single Circuit Board Implementation of a Digitally Compensated SAW Oscillator (DCSO).

DTIC Science & Technology

1983-12-01

Through this project a design for a Digitally Compensated SAW Oscillator (DCSO) was developed and implemented on a single circuit board. The AFIT IC, which...is the heart of the design , did not function properly. Therefore, my work was halted after testing several of the subcircuits and assembling the...o.... -7 Standards ........ o..o....... -8 Approach-9 Sequence of Presentation .................. -10 II, Design

Invited Paper Thin Film Technology In Design And Production Of Optical Systems

NASA Astrophysics Data System (ADS)

Guenther, K. H.; Menningen, R.; Burke, C. A.

1983-10-01

Basic optical properties of dielectric thin films for interference applications and of metallic optical coatings are reviewed. Some design considerations of how to use thin films best in optical systems are given, and some aspects of thin film production technology relevant to the optical designer and the optician are addressed. The necessity of proper specifications, inclusive of test methods, is emphasized.

Logos: the emblem in the marketing wars.

PubMed

Chan, S D

1994-07-01

The logo is a powerful marketing tool. It is a condensed form of communication for a selected niche in a mass audience. Effective logo design principles include considerations of art design, visual perception, memory retention, and succinct nonverbal communication. Design principles for logos for dental practices are presented. Dental practices may realize significant advantages if logos are properly conceived and executed and are creatively implemented.

Designing Flightdeck Procedures

NASA Technical Reports Server (NTRS)

Barshi, Immanuel; Mauro, Robert; Degani, Asaf; Loukopoulou, Loukia

2016-01-01

The primary goal of this document is to provide guidance on how to design, implement, and evaluate flight deck procedures. It provides a process for developing procedures that meet clear and specific requirements. This document provides a brief overview of: 1) the requirements for procedures, 2) a process for the design of procedures, and 3) a process for the design of checklists. The brief overview is followed by amplified procedures that follow the above steps and provide details for the proper design, implementation and evaluation of good flight deck procedures and checklists.

[Foot growth and foot types in children and adolescents: a narrative review].

PubMed

Xu, Miaomiao; Wang, Lin

2017-08-01

Foot shape and size are important for footwear design and production. Information about important foot characteristics helps not only to improve shoe comfort but to maintain the proper physiological development of the feet. What's more, plenty of studies have suggested that the shape of the shoe must closely resemble the shape of the foot to create a properly fitted shoe. This means that the differences between various populations should be considered and that footwear should be designed according to the measurements of users. Childhood and adolescent are important periods of human growth. During these periods, foot shape changes with human growth and can be influenced by extrinsic factors. Therefore, the foot shape characteristics of children and adolescents should be investigated. The results from these investigations can contribute to developing appropriate shoe for children and adolescents, improving perceived comfort of children shoes and preventing pedopathy among children and adolescents. This review aims to discuss measuring methods of foot shape, types of foot shape, and factors influencing foot shape. The results of the review can provide recommendations for investigating growth development of foot shape and useful information for consumers and shoe manufacturers.

RNA imaging: tracking in real-time RNA transport in neurons using molecular beacons and confocal microscopy.

PubMed

Zepeda, Angélica; Arias, Clorinda; Flores-Jasso, Fabian; Vaca, Luis

2013-01-01

RNAs are present within eukaryotic cells and are involved in several biological processes. RNA transport within cell compartments is important for proper cell function. To understand in depth the cellular processes in which RNA is involved requires a method that reveals RNA localization in real time in a sub-cellular context in living cells. In this protocol we describe a method for imaging RNA in living cells and in particular in neuronal cultures based on cell microinjection of molecular beacons in conjunction with confocal microscopy. This methodology overcomes some of the main obstacles for imaging RNA in live cells since microinjection allows the delivery of the probe to a desired cellular compartment and MBs bind with high specificity to its target RNA without inhibiting its function. The proper design of the MBs is essential to obtain RNA-MB association at the temperature of the cell cytosol. MBs design with other purposes in mind (such as PCR experiments) have a design that facilitates association to its target at high temperatures, rendering them unsuitable for live cell imaging. Using the methodology described in this chapter allows the study of RNA transport to different regions of neurons and may be combined with the tagging of proteins of interest to measure co-transport of the protein and the RNA to different cellular regions. Copyright © 2013 Elsevier Inc. All rights reserved.

Investigation of structure in the modular light pipe component for LED automotive lamp

NASA Astrophysics Data System (ADS)

Chen, Hsi-Chao; Zhou, Yang; Huang, Chien-Sheng; Jhong, Wan-Ling; Cheng, Bo-Wei; Jhang, Jhe-Ming

2014-09-01

Light-Emitting Diodes (LEDs) have the advantages of small length, long lifetime, fast response time (μs), low voltage, good mechanical properties and environmental protection. Furthermore, LEDs could replace the halogen lamps to avoid the mercury pollution and economize the use of energy. Therefore, the LEDs could instead of the traditional lamp in the future and became an important light source. The proposal of this study was to investigate the effects of the structure and length of the reflector component for a LED automotive lamp. The novel LED automotive lamp was assembled by several different modularization columnar. The optimized design of the different structure and the length to the reflector was simulated by software TracePro. The design result must met the vehicle regulation of United Nations Economic Commission for Europe (UNECE) such as ECE-R19 etc. The structure of the light pipe could be designed by two steps structure. Then constitute the proper structure and choose different power LED to meet the luminous intensity of the vehicle regulation. The simulation result shows the proper structure and length has the best total luminous flux and a high luminous efficiency for the system. Also, the stray light could meet the vehicle regulation of ECE R19. Finally, the experimental result of the selected structure and length of the light pipe could match the simulation result above 80%.

Should I drink responsibly, safely or properly? Confusing messages about reducing alcohol-related harm.

PubMed

Jones, Sandra C; Hall, Sabine; Kypri, Kypros

2017-01-01

'Responsible drinking' campaigns emerged in the early 1970s as a means of addressing hazardous drinking and its related consequences. While these were initially the product of public health agencies and health-related NGOs, they are increasingly being developed and disseminated by the alcohol industry. There is considerable debate as to whether industry-generated campaigns are designed to reduce hazardous drinking and related problems (as argued by their developers) or are designed to avoid government regulation or even to increase sales. The aim of the present study was to explore the way that recent industry-developed responsible drinking campaigns are perceived and interpreted by the general public. That is, do they promote low-risk drinking, promote risky drinking, or just muddy the waters. Two sub-studies were conducted. The first, a mall intercept study with 180 adults in two Australian shopping districts, explored participants' understanding of slogans/taglines. The second, an online survey with 480 Australian adults, explored understandings and interpretations of television/online commercials. The results of the two studies revealed diversity in participants' interpretation of the 'responsible drinking' advertisements. Terminology utilised in industry-developed advertisements was found to be ambiguous; for example, what age group was being referred to in the tagline 'Kids and alcohol don't mix', and whether 'Drink Properly' meant not drinking to excess or drinking in a way that made you look more sophisticated. In Study Two, the government-developed campaign ('Know when to say when') was clearly interpreted as warning against risky consumption of alcohol; whereas the industry-developed campaigns ('How to drink properly', 'Kids absorb your drinking', 'Friends are waiting') were interpreted to have a range of different meanings, including some seemingly unrelated to alcohol. These findings are consistent with the literature evaluating anti-smoking campaigns developed by the tobacco industry, and previous research showing that industry communications serve to soften public opinion and create the impression of a 'socially responsible' industry but are likely to be less effective than initiatives focused on the availability and promotion of alcohol.

77 FR 37346 - Export Control Reform Transition Plan

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-21

... review the appropriate Export Control Classification Number (ECCN) to determine the classification of their item. Licensees who are unsure of the proper ECCN designation may request a Commodity...

Breathing Easy

EPA Pesticide Factsheets

This fact sheet provides practical information and guidance to auto refinish shops on proper ventilation of paint mixing rooms, including ventilation system basics and diagrams, risk reduction ideas, common mistakes, tips, and design considerations.

Multiobjective optimization in structural design with uncertain parameters and stochastic processes

NASA Technical Reports Server (NTRS)

Rao, S. S.

1984-01-01

The application of multiobjective optimization techniques to structural design problems involving uncertain parameters and random processes is studied. The design of a cantilever beam with a tip mass subjected to a stochastic base excitation is considered for illustration. Several of the problem parameters are assumed to be random variables and the structural mass, fatigue damage, and negative of natural frequency of vibration are considered for minimization. The solution of this three-criteria design problem is found by using global criterion, utility function, game theory, goal programming, goal attainment, bounded objective function, and lexicographic methods. It is observed that the game theory approach is superior in finding a better optimum solution, assuming the proper balance of the various objective functions. The procedures used in the present investigation are expected to be useful in the design of general dynamic systems involving uncertain parameters, stochastic process, and multiple objectives.

Generation and investigation of terahertz Airy beam realized using parallel-plate waveguides

NASA Astrophysics Data System (ADS)

Wu, Mengru; Lang, Tingting; Shi, Guohua; Han, Zhanghua

2018-03-01

In this paper, the launching of Airy beam in the terahertz region using waveguiding structures was proposed, designed and numerically characterized. By properly designing the waveguide slit width and the packing number in different sections of parallel-plate waveguides (PPWGs) array, arbitrary phase delay and lateral position-dependent amplitude transmission through the structure, required to realize the target Airy beam profile, can be easily fulfilled. Airy beams working at the frequency of 0.3 THz with good non-diffracting, self-bending, and self-healing features are demonstrated. This study represents a new alternative to scattering-based metasurface structures, and can be utilized in many modern applications.

Kinematic analysis of the finger exoskeleton using MATLAB/Simulink.

PubMed

Nasiłowski, Krzysztof; Awrejcewicz, Jan; Lewandowski, Donat

2014-01-01

A paralyzed and not fully functional part of human body can be supported by the properly designed exoskeleton system with motoric abilities. It can help in rehabilitation, or movement of a disabled/paralyzed limb. Both suitably selected geometry and specialized software are studied applying the MATLAB environment. A finger exoskeleton was the base for MATLAB/Simulink model. Specialized software, such as MATLAB/Simulink give us an opportunity to optimize calculation reaching precise results, which help in next steps of design process. The calculations carried out yield information regarding movement relation between three functionally connected actuators and showed distance and velocity changes during the whole simulation time.

Passive damping enhancement of a two-degree-of-freedom system through a strongly nonlinear two-degree-of-freedom attachment

NASA Astrophysics Data System (ADS)

Wierschem, Nicholas E.; Quinn, D. Dane; Hubbard, Sean A.; Al-Shudeifat, Mohammad A.; McFarland, D. Michael; Luo, Jie; Fahnestock, Larry A.; Spencer, Billie F.; Vakakis, Alexander F.; Bergman, Lawrence A.

2012-12-01

This work reports on the first experimental study of the broadband targeted energy transfer properties of a two-degree-of-freedom (two-DOF) essentially nonlinear energy absorber. In particular, proper design of the absorber allows for an extended range of energy over which it serves to significantly enhance the damping observed in the structural system to which it is attached. Comparisons of computational and experimental results validate the proposed design as a means of drastically enhancing the damping properties of a structure by passive broadband targeted energy transfers to a strongly nonlinear, multidegree-of-freedom attachment.

Variability aware compact model characterization for statistical circuit design optimization

NASA Astrophysics Data System (ADS)

Qiao, Ying; Qian, Kun; Spanos, Costas J.

2012-03-01

Variability modeling at the compact transistor model level can enable statistically optimized designs in view of limitations imposed by the fabrication technology. In this work we propose an efficient variabilityaware compact model characterization methodology based on the linear propagation of variance. Hierarchical spatial variability patterns of selected compact model parameters are directly calculated from transistor array test structures. This methodology has been implemented and tested using transistor I-V measurements and the EKV-EPFL compact model. Calculation results compare well to full-wafer direct model parameter extractions. Further studies are done on the proper selection of both compact model parameters and electrical measurement metrics used in the method.

An in-situ study in SEM of delamination in several graphite/epoxy composite material systems

NASA Technical Reports Server (NTRS)

Bradley, W. L.

1986-01-01

A three point bend fixture compatible with the current loading stage for the Scanning Electron Microscope was designed and fabricated. End-notched flexure tests were run on several materials. Work to date was on AS4/3502, T6T145/F155, and T6T145/F185. Fracture toughness was measured. Fracture of neat resin specimens was begun. The decrease in delaminatin fracture toughness, compared to neat resin toughness, due to rigid fiber filler and interlaminar failure is addressed. An experimental program was designed to try to determine the proper interpretatin for apparent microcracking in neat resin specimens.

46 CFR 42.15-55 - Cargo ports and other similar openings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... be fitted with doors so designed as to ensure watertightness and structural integrity commensurate... shall be subject to tightness tests at the initial survey and at such subsequent surveys or more... the design and proper working of the vessel. (b) Unless permitted by the Commandant the lower edge of...

46 CFR 42.15-55 - Cargo ports and other similar openings.

Code of Federal Regulations, 2012 CFR

2012-10-01

... be fitted with doors so designed as to ensure watertightness and structural integrity commensurate... shall be subject to tightness tests at the initial survey and at such subsequent surveys or more... the design and proper working of the vessel. (b) Unless permitted by the Commandant the lower edge of...

46 CFR 42.15-55 - Cargo ports and other similar openings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... be fitted with doors so designed as to ensure watertightness and structural integrity commensurate... shall be subject to tightness tests at the initial survey and at such subsequent surveys or more... the design and proper working of the vessel. (b) Unless permitted by the Commandant the lower edge of...

46 CFR 42.15-55 - Cargo ports and other similar openings.

Code of Federal Regulations, 2014 CFR

2014-10-01

... be fitted with doors so designed as to ensure watertightness and structural integrity commensurate... shall be subject to tightness tests at the initial survey and at such subsequent surveys or more... the design and proper working of the vessel. (b) Unless permitted by the Commandant the lower edge of...

46 CFR 42.15-55 - Cargo ports and other similar openings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... be fitted with doors so designed as to ensure watertightness and structural integrity commensurate... shall be subject to tightness tests at the initial survey and at such subsequent surveys or more... the design and proper working of the vessel. (b) Unless permitted by the Commandant the lower edge of...

Minnesota's Soils and Their Uses.

ERIC Educational Resources Information Center

Halsey, Clifton

There is an increasing need for land planning and understanding soil is one step toward assuring proper land use. This publication, written by soil scientists and teachers, is designed as a reference for high school teachers. It is designed to be a comprehensive collection about Minnesota soils (although the information can be applied to other…

49 CFR 236.1015 - PTC Safety Plan content requirements and PTC System Certification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... established and can maintain a quality control system for PTC system design and manufacturing acceptable to... an explanation of the design principles and assumptions; (3) A risk assessment of the as-built PTC... the specific procedures and test equipment necessary to ensure the safe and proper installation...

The Use of Instructional Design in Educational Technology for Effective Teaching and Learning

ERIC Educational Resources Information Center

Gillani, Syeda Nosheen; Gujjar, Aijaz Ahmed; Choudhry, Bushra Naoreen

2008-01-01

Educationists are of the opinion that the educational problems relating to quantity and quality could be tackled by the proper utilization of instructional technology. Instructional technology is a systematic way of designing, carrying out and evaluating the teaching learning process. Instructional technology makes instruction more effective,…

Efficient Warm-ups: Creating a Warm-up That Works.

ERIC Educational Resources Information Center

Lauffenburger, Sandra Kay

1992-01-01

Proper warm-up is important for any activity, but designing an effective warm-up can be time consuming. An alternative approach is to take a cue from Laban Movement Analysis (LMA) and consider movement design from the perspective of space and planes of motion. Efficient warm-up exercises using LMA are described. (SM)

78 FR 35179 - Negotiated Rulemaking Committee, Negotiator Nominations and Schedule of Committee Meetings-Title...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-12

... title IV Federal Student Aid programs; regulations designed to prevent fraud; State authorization for... Against Women Reauthorization Act of 2013 to the campus safety and security reporting requirements in the... regulations designed to prevent fraud and otherwise ensure proper use of title IV Federal Student Aid program...

9 CFR 72.16 - Designated dipping stations to be approved by the Administrator, APHIS on recommendations of...

Code of Federal Regulations, 2010 CFR

2010-01-01

... approved by the Administrator, APHIS on recommendations of State authorities; facilities. 72.16 Section 72... CATTLE § 72.16 Designated dipping stations to be approved by the Administrator, APHIS on recommendations of State authorities; facilities. When deemed advisable and upon recommendation by the proper...

Teaching Computer-Aided Design of Fluid Flow and Heat Transfer Engineering Equipment.

ERIC Educational Resources Information Center

Gosman, A. D.; And Others

1979-01-01

Describes a teaching program for fluid mechanics and heat transfer which contains both computer aided learning (CAL) and computer aided design (CAD) components and argues that the understanding of the physical and numerical modeling taught in the CAL course is essential to the proper implementation of CAD. (Author/CMV)

INSTRUCTIONAL GUIDE FOR ELECTRICITY, JUNIOR HIGH SCHOOL INDUSTRIAL ARTS.

ERIC Educational Resources Information Center

GOLDSMITH, J. LYMAN

THIS GUIDE IS DESIGNED TO PROVIDE A PRACTICAL REFERENCE FOR TEACHERS PLANNING INSTRUCTION CONCERNING ELECTRICITY IN JUNIOR HIGH SCHOOL INDUSTRIAL ARTS CLASSES. THE GUIDE IS FOR A 10-WEEK COURSE DESIGNED TO PROVIDE THE STUDENT WITH EXPLORATORY EXPERIENCES INVOLVING THE BASIC PRINCIPLES AND APPLICATIONS OF ELECTRICITY AND ELECTRONICS. THE PROPER USE…

A numerical approach to controller design for the ACES facility

NASA Technical Reports Server (NTRS)

Frazier, W. Garth; Irwin, R. Dennis

1993-01-01

In recent years the employment of active control techniques for improving the performance of systems involving highly flexible structures has become a topic of considerable research interest. Most of these systems are quite complicated, using multiple actuators and sensors, and possessing high order models. The majority of analytical controller synthesis procedures capable of handling multivariable systems in a systematic way require considerable insight into the underlying mathematical theory to achieve a successful design. This insight is needed in selecting the proper weighting matrices or weighting functions to cast what is naturally a multiple constraint satisfaction problem into an unconstrained optimization problem. Although designers possessing considerable experience with these techniques have a feel for the proper choice of weights, others may spend a significant amount of time attempting to find an acceptable solution. Another disadvantage of such procedures is that the resulting controller has an order greater than or equal to that of the model used for the design. Of course, the order of these controllers can often be reduced, but again this requires a good understanding of the theory involved.

Macronutrient Intake for Physical Activity

NASA Astrophysics Data System (ADS)

Buford, Thomas

Proper nutrition is an essential element of athletic performance, body composition goals, and general health. Although natural variability among persons makes it impossible to create a single diet that can be recommended to all; examining scientific principles makes it easier for athletes and other physically active persons to eat a diet that prepares them for successful training and/or athletic competition. A proper nutritional design incorporates these principles and is tailored to the individual. It is important for the sports nutritionist, coach, and athlete to understand the role that each of the macronutrients plays in an active lifestyle. In addition, keys to success include knowing how to determine how many calories to consume, the macronutrient breakdown of those calories, and proper timing to maximize the benefits needed for the individual's body type and activity schedule.

Proper name retrieval in temporal lobe epilepsy: naming of famous faces and landmarks.

PubMed

Benke, Thomas; Kuen, Eva; Schwarz, Michael; Walser, Gerald

2013-05-01

The objective of this study was to further explore proper name (PN) retrieval and conceptual knowledge in patients with left and right temporal lobe epilepsy (69 patients with LTLE and 62 patients with RTLE) using a refined assessment procedure. Based on the performance of a large group of age- and education-matched normals, a new test of famous faces and famous landmarks was designed. Recognition, naming, and semantic knowledge were assessed consecutively, allowing for a better characterization of deficient levels in the naming system. Impairment in PN retrieval was common in the cohort with TLE. Furthermore, side of seizure onset impaired stages of name retrieval differently: LTLE impaired the lexico-phonological processing, whereas RTLE mainly impaired the perceptual-semantic stage of object recognition. In addition to deficient PN retrieval, patients with TLE had reduced conceptual knowledge regarding famous persons and landmarks. Copyright © 2013 Elsevier Inc. All rights reserved.

Beam conditioning for FELs: Consequences and methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolski, A.; Penn, G.; Sessler, A.

2004-06-29

The consequences of beam conditioning in four example cases (VISA, a Soft X-Ray FEL, LCLS and a ''Greenfield'' FEL) are examined. It is shown that in emittance limited cases, proper conditioning reduces sensitivity to the transverse emittance and, furthermore, allows for stronger focusing in the undulator. Simulations show higher saturation power, with gain lengths reduced by a factor of two or more. The beam dynamics in a general conditioning system are studied, with ''matching conditions'' derived for achieving conditioning without growth in the effective emittance. Various conditioning lattices are considered, and expressions derived for the amount of conditioning provided inmore » each case when the matching conditions are satisfied. These results show that there is no fundamental obstacle to producing beam conditioning, and that the problem can be reduced to one of proper lattice design. Nevertheless, beam conditioning will not be easy to implement in practice.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolski, A.; Penn, G.; Sessler, A.

The consequences of beam conditioning in four example cases [VISA, a soft x-ray free-electron laser (FEL), LCLS, and a 'Greenfield' FEL] are examined. It is shown that in emittance limited cases, proper conditioning reduces sensitivity to the transverse emittance and, furthermore, allows for stronger focusing in the undulator. Simulations show higher saturation power, with gain lengths reduced by a factor of 2 or more. The beam dynamics in a general conditioning system are studied, with 'matching conditions' derived for achieving conditioning without growth in the effective emittance. Various conditioning lattices are considered, and expressions derived for the amount of conditioningmore » provided in each case when the matching conditions are satisfied. These results show that there is no fundamental obstacle to producing beam conditioning, and that the problem can be reduced to one of proper lattice design. Nevertheless, beam conditioning will not be easy to implement in practice.« less

32 CFR 536.105 - Responsibilities generally/international agreements claims.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Monitoring the reimbursement system to ensure that programs for the proper verification and certification of... liaison with sending State representatives and establishing procedures designed to carry out the...

Efficacy, Safety, and Subject Satisfaction of a Specified Skin Care Regimen to Cleanse, Medicate, Moisturize, and Protect the Skin of Patients Under Treatment for Acne Vulgaris

PubMed Central

Del Rosso, James Q.; Gold, Michael; Rueda, Maria José; Brandt, Staci; Winkelman, Warren J.

2015-01-01

Optimal management of acne vulgaris requires incorporation of several components including patient education, selection of a rational therapeutic regimen, dedicated adherence with the program by the patient, and integration of proper skin care. Unfortunately, the latter component is often overlooked or not emphasized strongly enough to the patient. Proper skin care may reduce potential irritation that can be associated with topical acne medications and prevents the patient from unknowingly using skin care products that can actually sabotage their treatment. This article reviews the effectiveness, skin tolerability, safety, and patient satisfaction of an open label study in which a specified skin care regimen is used in combination with topical therapy. The study was designed to mirror “real world” management of facial acne vulgaris clinical practice. The skin care regimen used in this study included a brand foam wash and a brand moisturizer with SPF 30 photoprotection, both of which contain ingredients that are included to provide benefits for acne-prone and acne-affected skin. PMID:25610521

Design of integrated pitch axis for autopilot/autothrottle and integrated lateral axis for autopilot/yaw damper for NASA TSRV airplane using integral LQG methodology

NASA Technical Reports Server (NTRS)

Kaminer, Isaac; Benson, Russell A.; Coleman, Edward E.; Ebrahimi, Yaghoob S.

1990-01-01

Two designs are presented for control systems for the NASA Transport System Research Vehicle (TSRV) using integral Linear Quadratic Gaussian (LQG) methodology. The first is an integrated longitudinal autopilot/autothrottle design and the second design is an integrated lateral autopilot/yaw damper/sideslip controller design. It is shown that a systematic top-down approach to a complex design problem combined with proper application of modern control synthesis techniques yields a satisfactory solution in a reasonable period of time.

Design and Analysis of Tooth Impact Test Rig for Spur Gear

NASA Astrophysics Data System (ADS)

Ghazali, Wafiuddin Bin Md; Aziz, Ismail Ali Bin Abdul; Daing Idris, Daing Mohamad Nafiz Bin; Ismail, Nurazima Binti; Sofian, Azizul Helmi Bin

2016-02-01

This paper is about the design and analysis of a prototype of tooth impact test rig for spur gear. The test rig was fabricated and analysis was conducted to study its’ limitation and capabilities. The design of the rig is analysed to ensure that there will be no problem occurring during the test and reliable data can be obtained. From the result of the analysis, the maximum amount of load that can be applied, the factor of safety of the machine, the stresses on the test rig parts were determined. This is important in the design consideration of the test rig. The materials used for the fabrication of the test rig were also discussed and analysed. MSC Nastran Patran software was used to analyse the model, which was designed by using SolidWorks 2014 software. Based from the results, there were limitations found from the initial design and the test rig design needs to be improved in order for the test rig to operate properly.

Fractional Factorial Experiment Designs to Minimize Configuration Changes in Wind Tunnel Testing

NASA Technical Reports Server (NTRS)

DeLoach, Richard; Cler, Daniel L.; Graham, Albert B.

2002-01-01

This paper serves as a tutorial to introduce the wind tunnel research community to configuration experiment designs that can satisfy resource constraints in a configuration study involving several variables, without arbitrarily eliminating any of them from the experiment initially. The special case of a configuration study featuring variables at two levels is examined in detail. This is the type of study in which each configuration variable has two natural states - 'on or off', 'deployed or not deployed', 'low or high', and so forth. The basic principles are illustrated by results obtained in configuration studies conducted in the Langley National Transonic Facility and in the ViGYAN Low Speed Tunnel in Hampton, Virginia. The crucial role of interactions among configuration variables is highlighted with an illustration of difficulties that can be encountered when they are not properly taken into account.

A spiral, bi-planar gradient coil design for open magnetic resonance imaging.

PubMed

Zhang, Peng; Shi, Yikai; Wang, Wendong; Wang, Yaohui

2018-01-01

To design planar gradient coil for MRI applications without discretization of continuous current density and loop-loop connection errors. In the new design method, the coil current is represented using a spiral curve function described by just a few control parameters. Using a proper parametric equation set, an ensemble of spiral contours is reshaped to satisfy the coil design requirements, such as gradient linearity, inductance and shielding. In the given case study, by using the spiral coil design, the magnetic field errors in the imaging area were reduced from 5.19% (non-spiral design) to 4.47% (spiral design) for the transverse gradient coils, and for the longitudinal gradient coil design, the magnetic field errors were reduced to 5.02% (spiral design). The numerical evaluation shows that when compared with conventional wire loop, the inductance and resistance of spiral coil was reduced by 11.55% and 8.12% for x gradient coil, respectively. A novel spiral gradient coil design for biplanar MRI systems, the new design offers better magnetic field gradients, smooth contours than the conventional connected counterpart, which improves manufacturability.

Computer aided design of architecture of degradable tissue engineering scaffolds.

PubMed

Heljak, M K; Kurzydlowski, K J; Swieszkowski, W

2017-11-01

One important factor affecting the process of tissue regeneration is scaffold stiffness loss, which should be properly balanced with the rate of tissue regeneration. The aim of the research reported here was to develop a computer tool for designing the architecture of biodegradable scaffolds fabricated by melt-dissolution deposition systems (e.g. Fused Deposition Modeling) to provide the required scaffold stiffness at each stage of degradation/regeneration. The original idea presented in the paper is that the stiffness of a tissue engineering scaffold can be controlled during degradation by means of a proper selection of the diameter of the constituent fibers and the distances between them. This idea is based on the size-effect on degradation of aliphatic polyesters. The presented computer tool combines a genetic algorithm and a diffusion-reaction model of polymer hydrolytic degradation. In particular, we show how to design the architecture of scaffolds made of poly(DL-lactide-co-glycolide) with the required Young's modulus change during hydrolytic degradation.

Dynamical Systems in Circuit Designer's Eyes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Odyniec, M.

Examples of nonlinear circuit design are given. Focus of the design process is on theory and engineering methods (as opposed to numerical analysis). Modeling is related to measurements It is seen that the phase plane is still very useful with proper models Harmonic balance/describing function offers powerful insight (via the combination of simulation with circuit and ODE theory). Measurement and simulation capabilities increased, especially harmonics measurements (since sinusoids are easy to generate)

Assessing Sustainment Operations in a Decisive Action Training Environment

DTIC Science & Technology

2017-05-01

The findings in this Research Product are not to be construed as an official Department of the Army position, unless so designated by other authorized...Combat Training Center (CTC) rotations. The research design allowed for comparison of a control and experimental group. The experimental group received...CP Operations performance. The pocket-sized guide was designed as a quick reference for the proper planning, execution, and follow up of CP

Chemical Safety Alert: Rupture Hazard of Pressure Vessels

EPA Pesticide Factsheets

Pressure vessels or boilers can fail catastrophically if they are not properly designed, constructed, operated, inspected, tested, or repaired. Risk increases if vessels contents are toxic, corrosive, reactive, or flammable.

Silicosis: Learn the Facts!

MedlinePlus

... during water tank construction. He wore a charcoal filter respirator while sandblasting, but it was the wrong ... properly fitted and selected respirator (e.g. particulate filter or airline supplied air respirator) designated for protection ...

Statistical tools for transgene copy number estimation based on real-time PCR.

PubMed

Yuan, Joshua S; Burris, Jason; Stewart, Nathan R; Mentewab, Ayalew; Stewart, C Neal

2007-11-01

As compared with traditional transgene copy number detection technologies such as Southern blot analysis, real-time PCR provides a fast, inexpensive and high-throughput alternative. However, the real-time PCR based transgene copy number estimation tends to be ambiguous and subjective stemming from the lack of proper statistical analysis and data quality control to render a reliable estimation of copy number with a prediction value. Despite the recent progresses in statistical analysis of real-time PCR, few publications have integrated these advancements in real-time PCR based transgene copy number determination. Three experimental designs and four data quality control integrated statistical models are presented. For the first method, external calibration curves are established for the transgene based on serially-diluted templates. The Ct number from a control transgenic event and putative transgenic event are compared to derive the transgene copy number or zygosity estimation. Simple linear regression and two group T-test procedures were combined to model the data from this design. For the second experimental design, standard curves were generated for both an internal reference gene and the transgene, and the copy number of transgene was compared with that of internal reference gene. Multiple regression models and ANOVA models can be employed to analyze the data and perform quality control for this approach. In the third experimental design, transgene copy number is compared with reference gene without a standard curve, but rather, is based directly on fluorescence data. Two different multiple regression models were proposed to analyze the data based on two different approaches of amplification efficiency integration. Our results highlight the importance of proper statistical treatment and quality control integration in real-time PCR-based transgene copy number determination. These statistical methods allow the real-time PCR-based transgene copy number estimation to be more reliable and precise with a proper statistical estimation. Proper confidence intervals are necessary for unambiguous prediction of trangene copy number. The four different statistical methods are compared for their advantages and disadvantages. Moreover, the statistical methods can also be applied for other real-time PCR-based quantification assays including transfection efficiency analysis and pathogen quantification.

Which Tibial Tray Design Achieves Maximum Coverage and Ideal Rotation: Anatomic, Symmetric, or Asymmetric? An MRI-based study.

PubMed

Stulberg, S David; Goyal, Nitin

2015-10-01

Two goals of tibial tray placement in TKA are to maximize coverage and establish proper rotation. Our purpose was to utilize MRI information obtained as part of PSI planning to determine the impact of tibial tray design on the relationship between coverage and rotation. MR images for 100 consecutive knees were uploaded into PSI software. Preoperative planning software was used to evaluate 3 different tray designs: anatomic, symmetric, and asymmetric. Approximately equally good coverage was achieved with all three trays. However, the anatomic compared to symmetric/asymmetric trays required less malrotation (0.3° vs 3.0/2.4°; P < 0.001), with a higher proportion of cases within 5° of neutral (97% vs 73/77%; P < 0.001). In this study, the anatomic tibia optimized the relationship between coverage and rotation. Copyright © 2015 Elsevier Inc. All rights reserved.

Space power system design and development from an economic point of view

NASA Technical Reports Server (NTRS)

Hazelrigg, G. A., Jr.

1977-01-01

The concept of a satellite solar power system offers a feasible, but unproven, long-range energy alternative. While the basic physics of these systems is understood, many developments are necessary in order to reduce the system cost to the point of being cost-competitive with alternative energy sources. Thus, a substantial technology advancement and verification program, plus test and demonstration satellite programs are necessary before a full-scale satellite can be designed and built. It is important to properly identify those elements of the technology that should be subject to development efforts, the goals of the corresponding development programs and the appropriate funding levels and schedules. Systems studies and designs play a major role in rationally formulating a development program. This paper uses an economic approach to place these studies into a framework for formulating a viable satellite solar power system development plan.

Design-of-experiments to Reduce Life-cycle Costs in Combat Aircraft Inlets

NASA Technical Reports Server (NTRS)

Anderson, Bernhard H.; Baust, Henry D.; Agrell, Johan

2003-01-01

It is the purpose of this study to demonstrate the viability and economy of Design- of-Experiments (DOE), to arrive at micro-secondary flow control installation designs that achieve optimal inlet performance for different mission strategies. These statistical design concepts were used to investigate the properties of "low unit strength" micro-effector installation. "Low unit strength" micro-effectors are micro-vanes, set a very low angle-of incidence, with very long chord lengths. They are designed to influence the neat wall inlet flow over an extended streamwise distance. In this study, however, the long chord lengths were replicated by a series of short chord length effectors arranged in series over multiple bands of effectors. In order to properly evaluate the performance differences between the single band extended chord length installation designs and the segmented multiband short chord length designs, both sets of installations must be optimal. Critical to achieving optimal micro-secondary flow control installation designs is the understanding of the factor interactions that occur between the multiple bands of micro-scale vane effectors. These factor interactions are best understood and brought together in an optimal manner through a structured DOE process, or more specifically Response Surface Methods (RSM).

Writing qualitative article: It is time to quality improvement.

PubMed

Sanjari, Mahnaz; Jafaraghayee, Fatemeh; Aalaa, Maryam; Mehrdad, Neda

2016-01-01

Précis: This debate article highlights some questions from critics of qualitative research. Planning for proper design, philosophical background, researcher as a research instrument in the study, trustworthiness and application of findings are main debates in this field. One of the issues that have been received little attention is report of qualitative inquiry. A qualified report can answer the critics. This requires that the qualitative articles cover all points about the selected method and rigourness of study conduct to convince policy makers, managers and all readers in different level.

A parametric study of cut-off corrugated surface properties

NASA Technical Reports Server (NTRS)

Mentzer, C. A.; Peters, L., Jr.

1973-01-01

Corrugated horns involve a junction between the corrugated surface and a conducting groundplane. Proper horn design requires an understanding of the electromagnetic properties of the corrugated surface and this junction. Therefore, an integral equation solution has been used to study the influence of corrugation density and shape on the power loss. Surface current, and the scattering from a groundplane-corrugated surface junction. Both square and vee shape corrugations have been considered over the range of corrugation depths where the surface acts as a cut-off corrugated surface.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Damtie, Fikeraddis A., E-mail: Fikeraddis.Damtie@teorfys.lu.se; Wacker, Andreas, E-mail: Andreas.Wacker@fysik.lu.se; Karki, Khadga J., E-mail: Khadga.Karki@chemphys.lu.se

Multiple exciton generation (MEG) is a process in which more than one electron hole pair is generated per absorbed photon. It allows us to increase the efficiency of solar energy harvesting. Experimental studies have shown the multiple exciton generation yield of 1.2 in isolated colloidal quantum dots. However real photoelectric devices require the extraction of electron hole pairs to electric contacts. We provide a systematic study of the corresponding quantum coherent processes including extraction and injection and show that a proper design of extraction and injection rates enhances the yield significantly up to values around 1.6.

AHP based Anthropometric Analysis of University Hall Bed Design in Bangladesh

NASA Astrophysics Data System (ADS)

Halder, Pobitra; Sarker, Eity; Karmaker, Chitralekha

2018-05-01

In university hall, different types of bed are used for providing sleeping environment to the students. Although there are wide variations in the design of students' bed in Bangladeshi university hall, none of them are designed properly considering the anthropometric data. In this study, four anthropometric measurements related to normal students' bed dimensions were measured from 300 students from a public university hall in Bangladesh. The feedbacks regarding different health problems and their reasons were collected from considering practical situations of the students and gathering experts' opinions. Chi-square test showed that back pain, blood circulation problem, fatigue, comfort, and sleeping problem are related to students' anthropometric measurements. The analytic hierarchy process (AHP) analysis identified students' bed length as the most responsible attribute for ergonomic problems of the students. Finally, the linear regression and correlation analysis suggested the bed dimensions based on stature of the students. This study can be a helpful guideline for industrial engineers and manufacturers in designing more comfortable students' bed.

Solar Electric Propulsion Vehicle Design Study for Cargo Transfer to Earth-moon L1

NASA Technical Reports Server (NTRS)

Sarver-Verhey, Timothy R.; Kerslake, Thomas W.; Rawlin, Vincent K.; Falck, Robert D.; Dudzinski, Leonard J.; Oleson, Steven R.

2002-01-01

A design study for a cargo transfer vehicle using solar electric propulsion was performed for NASA's Revolutionary Aerospace Systems Concepts program. Targeted for 2016, the solar electric propulsion (SEP) transfer vehicle is required to deliver a propellant supply module with a mass of approximately 36 metric tons from Low Earth Orbit to the first Earth-Moon libration point (LL1) within 270 days. Following an examination of propulsion and power technology options, a SEP transfer vehicle design was selected that incorporated large-area (approx. 2700 sq m) thin film solar arrays and a clustered engine configuration of eight 50 kW gridded ion thrusters mounted on an articulated boom. Refinement of the SEP vehicle design was performed iteratively to properly estimate the required xenon propellant load for the out-bound orbit transfer. The SEP vehicle performance, including the xenon propellant estimation, was verified via the SNAP trajectory code. Further efforts are underway to extend this system model to other orbit transfer missions.

A feasibility study on the design and walking operation of a biped locomotor via dynamic simulation

NASA Astrophysics Data System (ADS)

Wang, Mingfeng; Ceccarelli, Marco; Carbone, Giuseppe

2016-06-01

A feasibility study on the mechanical design and walking operation of a Cassino biped locomotor is presented in this paper. The biped locomotor consists of two identical 3 degrees-of-freedom tripod leg mechanisms with a parallel manipulator architecture. Planning of the biped walking gait is performed by coordinating the motions of the two leg mechanisms and waist. A threedimensional model is elaborated in SolidWorks® environment in order to characterize a feasible mechanical design. Dynamic simulation is carried out in MSC.ADAMS® environment with the aims of characterizing and evaluating the dynamic walking performance of the proposed design. Simulation results show that the proposed biped locomotor with proper input motions of linear actuators performs practical and feasible walking on flat surfaces with limited actuation and reaction forces between its feet and the ground. A preliminary prototype of the biped locomotor is built for the purpose of evaluating the operation performance of the biped walking gait of the proposed locomotor.

Applications and limitations of radiomics

NASA Astrophysics Data System (ADS)

Yip, Stephen S. F.; Aerts, Hugo J. W. L.

2016-07-01

Radiomics is an emerging field in quantitative imaging that uses advanced imaging features to objectively and quantitatively describe tumour phenotypes. Radiomic features have recently drawn considerable interest due to its potential predictive power for treatment outcomes and cancer genetics, which may have important applications in personalized medicine. In this technical review, we describe applications and challenges of the radiomic field. We will review radiomic application areas and technical issues, as well as proper practices for the designs of radiomic studies.

Tracking data in the office environment.

PubMed

Erickson, Ty B

2010-09-01

Data tracking in the office setting focuses on a narrow spectrum of the entire patient safety arena; however, when properly executed, data tracking increases staff members' awareness of the importance of patient safety. Data tracking is also a high-volume event and thereby continues to loop back on the consciousness of providers in all aspects of their practice. Improvement in date tracking will improve the collateral areas of patient safety such as proper medication usage, legibility of written communication, effective delegation of patient safety initiatives, and a collegial effort at developing teams for safety design processes.

Designing Infographics to support teaching complex science subject: A comparison between static and animated Infographics

NASA Astrophysics Data System (ADS)

Hassan, Hesham Galal

This thesis explores the proper principles and rules for creating excellent infographics that communicate information successfully and effectively. Not only does this thesis examine the creation of Infographics, it also tries to answer which format, Static or Animated Infographics, is the most effective when used as a teaching-aid framework for complex science subjects, and if compelling Infographics in the preferred format facilitate the learning experience. The methodology includes the creation of infographic using two formats (Static and Animated) of a fairly complex science subject (Phases Of The Moon), which were then tested for their efficacy as a whole, and the two formats were compared in terms of information comprehension and retention. My hypothesis predicts that the creation of an infographic using the animated format would be more effective in communicating a complex science subject (Phases Of The Moon), specifically when using 3D computer animation to visualize the topic. This would also help different types of learners to easily comprehend science subjects. Most of the animated infographics produced nowadays are created for marketing and business purposes and do not implement the analytical design principles required for creating excellent information design. I believe that science learners are still in need of more variety in their methods of learning information, and that infographics can be of great assistance. The results of this thesis study suggests that using properly designed infographics would be of great help in teaching complex science subjects that involve spatial and temporal data. This could facilitate learning science subjects and consequently impact the interest of young learners in STEM.

40 CFR 133.105 - Treatment equivalent to secondary treatment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... through proper operation and maintenance of the treatment works, based on an analysis of the past... treatment works, considering the design capability of the treatment process and geographical and climatic...

Preventing Workplace Injuries and Illnesses through Ergonomics. Listening to Our Pain.

ERIC Educational Resources Information Center

Rosskam, Ellen; Baichoo, Pavan

1997-01-01

Ergonomics focuses on the prevention of injuries through proper design of equipment, workstations, and products. The adoption of an ergonomic philosophy in the workplace has demonstrable benefits. (JOW)

Ventilation Guidance for Spray Polyurethane Foam Application

EPA Pesticide Factsheets

Properly designed ventilation can reduce airborne levels of aerosols, mists, and vapors generated during spray application and can help protect SPF applicators, helpers, and others who may be working in adjacent areas.

Optimal cure cycle design of a resin-fiber composite laminate

NASA Technical Reports Server (NTRS)

Hou, Jean W.; Sheen, Jeenson

1987-01-01

A unified computed aided design method was studied for the cure cycle design that incorporates an optimal design technique with the analytical model of a composite cure process. The preliminary results of using this proposed method for optimal cure cycle design are reported and discussed. The cure process of interest is the compression molding of a polyester which is described by a diffusion reaction system. The finite element method is employed to convert the initial boundary value problem into a set of first order differential equations which are solved simultaneously by the DE program. The equations for thermal design sensitivities are derived by using the direct differentiation method and are solved by the DE program. A recursive quadratic programming algorithm with an active set strategy called a linearization method is used to optimally design the cure cycle, subjected to the given design performance requirements. The difficulty of casting the cure cycle design process into a proper mathematical form is recognized. Various optimal design problems are formulated to address theses aspects. The optimal solutions of these formulations are compared and discussed.

Medical Requirements for Ambulance Design and Equipment. Emergency Health Series.

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC. Div. of Medical Sciences.

A vehicle must meet certain specific requirements to be classified as an ambulance if it is to satisfy the demands of the physician in terms of emergency care for which properly trained ambulance attendants can be held responsible. Developed by professional and lay experts for use by automotive designers and manufacturing, this publication would…

Design and Implementation of an Interactive System for Teaching the Islamic Prayer

ERIC Educational Resources Information Center

Farsi, Mohammed; Munro, Malcolm

2016-01-01

Background: The Islamic Prayer is central to the Islam religion and is a requirement for all Muslims to learn and perform properly. Teaching the Islamic Prayer had traditionally been through the use of textbooks. Aims: This paper describes the design and implementation of the iIP (interactive Islamic Prayer) system to teach the Islamic prayer…

Preventing Alcohol and Other Drug Problems through Drug Education. Policy Bulletin No. 3.

ERIC Educational Resources Information Center

Bailey, William J.

Public schools have a responsibility to educate students about drug abuse, and states have a responsibility to assist schools in their efforts. Properly designed and implemented drug education programs are the most cost-effective means of preventing alcohol and other drug problems. Poorly designed and implemented programs, on the other hand, can…

Pressure Safety: Advanced Live 11459

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glass, George

Many Los Alamos National Laboratory (LANL) operations use pressure equipment and systems. Failure to follow proper procedures when designing or operating pressure systems can result in injuries to personnel and damage to equipment and/or the environment. This manual presents an overview of the requirements and recommendations that address the safe design and operation of pressure systems at LANL.

The Full-sky Astrometric Mapping Explorer - Astrometry for the New Millennium

NASA Astrophysics Data System (ADS)

Horner, S. D.; Germain, M. E.; Greene, T. P.; Harris, F. H.; Johnson, M. S.; Johnson, K. J.; Monet, D. G.; Murison, M. A.; Phillips, J. D.; Reasenberg, R. D.; Seidelmann, P. K.; Urban, S. E.; Vassar, R. H.

FAME is designed to perform an all-sky, astrometric survey with unprecedented accuracy. It will create a rigid astrometric catalog of ~40,000,000 stars with visual band magnitudes 5 < V < 15. For bright stars, 5 < V < 9, FAME will determine positions and parallaxes accurate to < 50 microarcseconds, with proper motion errors < 50 microarcseconds/year. For fainter stars, 9 < V < 15, FAME will determine positions and parallaxes accurate to < 300 microarcseconds, with proper motion errors < 300 microarcseconds/year. It will also collect photometric data on these 40,000,000 stars in four Sloan DSS colors. The FAME data will provide a rigid, accurate, optical, astrometric grid. The proper motion data, combined with Hipparcos and other data should be ideal for use by the Space Interferometry Mission (SIM) to select its astrometric reference grid stars. FAME will also identify stars with nonlinear proper motions as candidates for further study by SIM, Terrestrial Planet Finder, and future ground based interferometers as possible planetary systems. The fundamental astrometric data provided at relatively low cost by FAME will help optimize the scientific return from these future projects. This is in addition to the considerable direct scientific return from FAME. It will redefine the extragalactic distance scale and provide a large, rich database of information on stellar properties that will enable numerous science investigations into stellar structure and evolution, the dynamics of the Milky Way, and stellar companions including brown dwarfs and giant planets. NASA has selected the Full-sky Astrometric Mapping Explorer (FAME) to be one of five MIDEX missions to be funded for a concept study. This concept study will be submitted to NASA on 18 June, with final selection, scheduled for September, of two of these missions for fli ght in 2003 or 2004. FAME is a joint development e ffort of the U.S. Naval Observatory, the Smithsonian Astrophysical Observatory, the Infrared Processing and Analysis Center, Lockheed Martin Missiles and Space, the Naval Research Laboratory, and Omitron Incorporated.

IGDS/TRAP Interface Program (ITIP). Software User Manual (SUM). [network flow diagrams for coal gasification studies

NASA Technical Reports Server (NTRS)

Jefferys, S.; Johnson, W.; Lewis, R.; Rich, R.

1981-01-01

This specification establishes the requirements, concepts, and preliminary design for a set of software known as the IGDS/TRAP Interface Program (ITIP). This software provides the capability to develop at an Interactive Graphics Design System (IGDS) design station process flow diagrams for use by the NASA Coal Gasification Task Team. In addition, ITIP will use the Data Management and Retrieval System (DMRS) to maintain a data base from which a properly formatted input file to the Time-Line and Resources Analysis Program (TRAP) can be extracted. This set of software will reside on the PDP-11/70 and will become the primary interface between the Coal Gasification Task Team and IGDS, DMRS, and TRAP. The user manual for the computer program is presented.

The Impact of Housing on the Characteristics of Ceramic Pressure Sensors—An Issue of Design for Manufacturability

PubMed Central

Santo Zarnik, Marina; Belavic, Darko; Novak, Franc

2015-01-01

An exploratory study of the impact of housing on the characteristics of a low-temperature co-fired ceramic (LTCC) pressure sensor is presented. The ceramic sensor structure is sealed in a plastic housing. This may have non-negligible effect on the final characteristics and should be considered in the early design phase. The manufacturability issue mainly concerning the selection of available housing and the most appropriate materials was considered with respect to different requirements for low and high pressure ranges of operation. Numerical predictions showed the trends and helped reveal the critical design parameters. Proper selection of the adhesive material remains an essential issue. Curing of the epoxy adhesive may introduce non-negligible residual stresses, which considerably influence the sensor’s characteristics. PMID:26694386

Economics In Optical Design, Analysis, And Production

NASA Astrophysics Data System (ADS)

Willey, Ronald R.

1983-10-01

There are indications that we are entering an era wherein economics will play an increasing role in the optical design and production process. Economics has always been a factor in the competition between commercial ventures in the product arena. Now, we may begin to see competition between different technologies for the scarce resources of the society, including money. A proper design approach begins with a thorough examination and refinement of the requirements from the top down. The interrelationships of the various components must be properly understood and balanced. The specifications must be clear, complete, and realistic. Improper or incomplete system design can cause an extensive waste of resources. The detail optical design to meet the performance requirements has sometimes been the only part of the process that the designer has considered his own responsibility. The final optimization should also consider economic related factors: the cost of tolerances, the available tools test plates, materials, and test equipment. In the preliminary design stage, he should have decided which alignment and test methods are most appropriate to the system. The distribution of tolerances in an optical/mechanical system is a frequently neglected opportunity to reduce cost. We have reported previously on our work in this area, and expand further on it in the context of this paper. The designer now has an opportunity to generate better designs at a lower cost that are more economical to produce. The watchword for the 1980's may become the one found in the assembly automation industry: "more, better, for less".

20 CFR 10.822 - How are subpoenas or advisory opinions obtained?

Code of Federal Regulations, 2010 CFR

2010-04-01

... advisory opinion concerning professional medical standards, medical ethics or medical regulation to a...: (1) As to an issue properly designated by the provider, in the sound discretion of the administrative...

29 CFR 778.105 - Determining the workweek.

Code of Federal Regulations, 2010 CFR

2010-07-01

... or different workweeks may be established for different employees or groups of employees. Once the... permanent and is not designed to evade the overtime requirements of the Act. The proper method of computing...

Heliport Design

DOT National Transportation Integrated Search

1994-01-20

While a heliport itself may be simple, the planning and organization required to : properly put one into place can be intimidating. To help make the process easier, : the Federal Aviation Administration has published this Advisory Circular : (AC) 150...

Training development for pavement preservation.

DOT National Transportation Integrated Search

2013-05-01

This research project strives to help the Iowa Department of Transportation (DOT) fully achieve the full benefits of pavement : preservation through training on proper selection, design, and application of pavement preservation treatments. In some ca...

The Gym the Jocks Built.

ERIC Educational Resources Information Center

Morgan, Marylou J.

1979-01-01

Properly planned and designed facilities for both athletic and physical education programs, which would allow cooperation, peaceful coexistence, and an effective program for both, provide a challenge for innovative educational planners and architects. (Author/MLF)

Design Process-System and Methodology of Design Research

NASA Astrophysics Data System (ADS)

Bashier, Fathi

2017-10-01

Studies have recognized the failure of the traditional design approach both in practice and in the studio. They showed that design problems today are too complex for the traditional approach to cope with and reflected a new interest in a better quality design services in order to meet the challenges of our time. In the mid-1970s and early 1980s, there has been a significant shift in focus within the field of design research towards the aim of creating a ‘design discipline’. The problem, as will be discussed, is the lack of an integrated theory of design knowledge that can explicitly describe the design process in a coherent way. As a consequence, the traditional approach fails to operate systematically, in a disciplinary manner. Addressing this problem is the primary goal of the research study in the design process currently being conducted in the research-based master studio at Wollega University, Ethiopia. The research study seeks to make a contribution towards a disciplinary approach, through proper understanding the mechanism of knowledge development within design process systems. This is the task of the ‘theory of design knowledge’. In this article the research project is introduced, and a model of the design process-system is developed in the studio as a research plan and a tool of design research at the same time. Based on data drawn from students’ research projects, the theory of design knowledge is developed and empirically verified through the research project.

ProperCAD: A portable object-oriented parallel environment for VLSI CAD

NASA Technical Reports Server (NTRS)

Ramkumar, Balkrishna; Banerjee, Prithviraj

1993-01-01

Most parallel algorithms for VLSI CAD proposed to date have one important drawback: they work efficiently only on machines that they were designed for. As a result, algorithms designed to date are dependent on the architecture for which they are developed and do not port easily to other parallel architectures. A new project under way to address this problem is described. A Portable object-oriented parallel environment for CAD algorithms (ProperCAD) is being developed. The objectives of this research are (1) to develop new parallel algorithms that run in a portable object-oriented environment (CAD algorithms using a general purpose platform for portable parallel programming called CARM is being developed and a C++ environment that is truly object-oriented and specialized for CAD applications is also being developed); and (2) to design the parallel algorithms around a good sequential algorithm with a well-defined parallel-sequential interface (permitting the parallel algorithm to benefit from future developments in sequential algorithms). One CAD application that has been implemented as part of the ProperCAD project, flat VLSI circuit extraction, is described. The algorithm, its implementation, and its performance on a range of parallel machines are discussed in detail. It currently runs on an Encore Multimax, a Sequent Symmetry, Intel iPSC/2 and i860 hypercubes, a NCUBE 2 hypercube, and a network of Sun Sparc workstations. Performance data for other applications that were developed are provided: namely test pattern generation for sequential circuits, parallel logic synthesis, and standard cell placement.

Analysis of Work Design in Rubber Processing Plant

NASA Astrophysics Data System (ADS)

Wahyuni, Dini; Nasution, Harmein; Budiman, Irwan; Wijaya, Khairini

2018-02-01

The work design illustrates how structured jobs, tasks, and roles are defined and modified and their impact on individuals, groups, and organizations. If the work is not designed well, the company must pay greater costs for workers' health, longer production processes or even penalties for not being able to meet the delivery schedule. This is visible to the condition in a rubber processing factory in North Sumatra. Work design aspects such as layouts, machinery and equipment, worker's physical working environment, work methods, and organizational policies have not been well-organized. Coagulum grinding machines into sheets are often damaged, resulting in 4 times the delay of product delivery in 2016, the presence of complaints of heat exposure submitted by workers, and workstation that has not been properly arranged is an indication of the need for work design. The research data will be collected through field observation, and distribution of questionnaires related aspects of work design. The result of the analysis depends on the respondent's answer from the distributed questionnaire regarding the 6 aspects studied.

Application of zonal model on indoor air sensor network design

NASA Astrophysics Data System (ADS)

Chen, Y. Lisa; Wen, Jin

2007-04-01

Growing concerns over the safety of the indoor environment have made the use of sensors ubiquitous. Sensors that detect chemical and biological warfare agents can offer early warning of dangerous contaminants. However, current sensor system design is more informed by intuition and experience rather by systematic design. To develop a sensor system design methodology, a proper indoor airflow modeling approach is needed. Various indoor airflow modeling techniques, from complicated computational fluid dynamics approaches to simplified multi-zone approaches, exist in the literature. In this study, the effects of two airflow modeling techniques, multi-zone modeling technique and zonal modeling technique, on indoor air protection sensor system design are discussed. Common building attack scenarios, using a typical CBW agent, are simulated. Both multi-zone and zonal models are used to predict airflows and contaminant dispersion. Genetic Algorithm is then applied to optimize the sensor location and quantity. Differences in the sensor system design resulting from the two airflow models are discussed for a typical office environment and a large hall environment.

[Using Interdisciplinary Cooperation to Improve the Rate of Proper Performance of a Hand Exercise Among Hemodialysis Patients With Arteriovenous Fistula Construction].

PubMed

Hsiao, Ya-Hsin; Shin, Miao-Ling; Huang, Cyong-Pei; Chen, Siang-Jyun; Huang, Tsuey-Yuan

2017-06-01

Patients who undergo new arteriovenous fistula (AVF) construction as part of their hemodialysis treatment program are required to perform hand exercises properly in order to maintain AVF function. However, poor performance of these hand exercises currently results in the failure of many patients to preserve AVF function. To increase the rate of performing this hand exercise properly from 55% to 80%. A comprehensive investigation identified the following five main problems: (a) Insufficient muscular endurance; (b) Resistance was not labeled on the ball; (c) Difficulties with maintaining a grip on the ball during the exercise; (d) Lack of standardized education procedures; and (e) Nurses lack latest knowledge on the hand exercise. The strategies used to improve the situation included: (a) Interdisciplinary team cooperation with physiotherapists to design individualized resistance training regimens; (b) Exercise tool improvement; (c) Standardized AVF care; (d) Continuous education for nursing staffs; and (e) Seed teacher program for hand exercise. The rate of proper hand exercise performance increased from 55% to 93%. This nursing project involved an interdisciplinary team that included physiotherapists in order to successfully improve the rate at which the hand exercise was performed properly. This positive experience may be applied to other hemodialysis departments in the treatment of patients with AVF.

Basic principles of stability.

PubMed

Egan, William; Schofield, Timothy

2009-11-01

An understanding of the principles of degradation, as well as the statistical tools for measuring product stability, is essential to management of product quality. Key to this is management of vaccine potency. Vaccine shelf life is best managed through determination of a minimum potency release requirement, which helps assure adequate potency throughout expiry. Use of statistical tools such a least squares regression analysis should be employed to model potency decay. The use of such tools provides incentive to properly design vaccine stability studies, while holding stability measurements to specification presents a disincentive for collecting valuable data. The laws of kinetics such as Arrhenius behavior help practitioners design effective accelerated stability programs, which can be utilized to manage stability after a process change. Design of stability studies should be carefully considered, with an eye to minimizing the variability of the stability parameter. In the case of measuring the degradation rate, testing at the beginning and the end of the study improves the precision of this estimate. Additional design considerations such as bracketing and matrixing improve the efficiency of stability evaluation of vaccines.

Analysis of Slabs-on-Grade for a Variety of Loading and Support Conditions.

DTIC Science & Technology

1984-12-01

applications, namely "- the problem of a slab-on-grade, as encountered in the analysis and design of rigid pavements. - ". This is one of the few...proper design and construction methods are adhered to. There are several additional reasons, entirely due to recent developments, that warrant the...conservative designs led to almost imperceptible pavement deformations, thus warranting the term "rigid pavements". Modern-day analytical techniques

Water Power in The Wilderness: The History of Bonneville Lock and Dam

DTIC Science & Technology

1997-01-01

to present many complex problems of site selection, proper construction techniques, and equipment design . The project first received serious...Bonneville Dam amply lived up to the hopes and dreams of its promoters and designers . In the short term, Bonneville supplied essential power for the...plan for the Columbia River. It designated Grand Coulee as the key upriver project and Bonneville as the lowermost in the chain . Report data on the

Specific, Measureable, Attainable, Relevant, and Timely (SMART) Documents: Utilized in Assessing Socioeconomic Impacts of Cascading Infrastructure Disruptions

DTIC Science & Technology

2017-02-01

their respective owners. The findings of this report are not to be construed as an official Department of the Army position unless so designated by...Even with properly designed infrastructures that sat- isfy people’s needs in normal-functioning scenarios, infrastructure performance is often...Army-relevant contexts can be explored. This model will be designed to provide possible policy insights into how best to protect crucial

Advanced Lubrication for Energy Efficiency, Durability and Lower Maintenance Costs of Advanced Naval Components and Systems

DTIC Science & Technology

2010-08-20

for transmitting the required power and torque. The proper gear set has also been sized to insure life expectancy of the test rig. The shaft design ...these at minimal cost and great environmental safety. These materials specifically designed on antiwear and extreme pressure chemistries can...nanolubricant additives are designed as surface-stabilized nanomaterials that are dispersed in a hydrocarbon medium for maximum effectiveness. This

Studies of The Durability of Belt Conveyor Idlers with Working Loads Taken into Account

NASA Astrophysics Data System (ADS)

Król, Robert

2017-12-01

The results of laboratory and operational studies conducted in the Machinery Systems Division of Wroclaw University of Technology in recent years have became the basis for selecting proper belt conveyor roller designs optimized for specific strength and operational criteria. The usefulness of the results for assessing the energy intensity of idlers, estimating their durability and determining modernization policies has been confirmed. Methods of estimating the durability of carrying idlers on the basis of the identified output stream distributions are presented. Results of studies carried out using an analytical method and a laboratory method are reported. It has been shown that the operational durability of a roller is determined by its design, the roller set parameters (the spacing and the angle of bevel) and the operating conditions having a bearing on the irregularity of the transported output stream.

Randomized Trials Built on Sand: Examples from COPD, Hormone Therapy, and Cancer

PubMed Central

Suissa, Samy

2012-01-01

The randomized controlled trial is the fundamental study design to evaluate the effectiveness of medications and receive regulatory approval. Observational studies, on the other hand, are essential to address post-marketing drug safety issues but have also been used to uncover new indications or new benefits for already marketed drugs. Hormone replacement therapy (HRT) for instance, effective for menopausal symptoms, was reported in several observational studies during the 1980s and 1990s to also significantly reduce the incidence of coronary heart disease. This claim was refuted in 2002 by the large-scale Women’s Health Initiative randomized trial. An example of a new indication for an old drug is that of metformin, an anti-diabetic medication, which is being hailed as a potential anti-cancer agent, primarily on the basis of several recent observational studies that reported impressive reductions in cancer incidence and mortality with its use. These observational studies have now sparked the conduct of large-scale randomized controlled trials currently ongoing in cancer. We show in this paper that the spectacular effects on new indications or new outcomes reported in many observational studies in chronic obstructive pulmonary disease (COPD), HRT, and cancer are the result of time-related biases, such as immortal time bias, that tend to seriously exaggerate the benefits of a drug and that eventually disappear with the proper statistical analysis. In all, while observational studies are central to assess the effects of drugs, their proper design and analysis are essential to avoid bias. The scientific evidence on the potential beneficial effects in new indications of existing drugs will need to be more carefully assessed before embarking on long and expensive unsubstantiated trials. PMID:23908838

Injector design for liner-on-target gas-puff experiments

NASA Astrophysics Data System (ADS)

Valenzuela, J. C.; Krasheninnikov, I.; Conti, F.; Wessel, F.; Fadeev, V.; Narkis, J.; Ross, M. P.; Rahman, H. U.; Ruskov, E.; Beg, F. N.

2017-11-01

We present the design of a gas-puff injector for liner-on-target experiments. The injector is composed of an annular high atomic number (e.g., Ar and Kr) gas and an on-axis plasma gun that delivers an ionized deuterium target. The annular supersonic nozzle injector has been studied using Computational Fluid Dynamics (CFD) simulations to produce a highly collimated (M > 5), ˜1 cm radius gas profile that satisfies the theoretical requirement for best performance on ˜1-MA current generators. The CFD simulations allowed us to study output density profiles as a function of the nozzle shape, gas pressure, and gas composition. We have performed line-integrated density measurements using a continuous wave (CW) He-Ne laser to characterize the liner gas density. The measurements agree well with the CFD values. We have used a simple snowplow model to study the plasma sheath acceleration in a coaxial plasma gun to help us properly design the target injector.

Injector design for liner-on-target gas-puff experiments.

PubMed

Valenzuela, J C; Krasheninnikov, I; Conti, F; Wessel, F; Fadeev, V; Narkis, J; Ross, M P; Rahman, H U; Ruskov, E; Beg, F N

2017-11-01

We present the design of a gas-puff injector for liner-on-target experiments. The injector is composed of an annular high atomic number (e.g., Ar and Kr) gas and an on-axis plasma gun that delivers an ionized deuterium target. The annular supersonic nozzle injector has been studied using Computational Fluid Dynamics (CFD) simulations to produce a highly collimated (M > 5), ∼1 cm radius gas profile that satisfies the theoretical requirement for best performance on ∼1-MA current generators. The CFD simulations allowed us to study output density profiles as a function of the nozzle shape, gas pressure, and gas composition. We have performed line-integrated density measurements using a continuous wave (CW) He-Ne laser to characterize the liner gas density. The measurements agree well with the CFD values. We have used a simple snowplow model to study the plasma sheath acceleration in a coaxial plasma gun to help us properly design the target injector.

The Parametric Study and Fine-Tuning of Bow-Tie Slot Antenna with Loaded Stub

PubMed Central

2017-01-01

A printed Bow-Tie slot antenna with loaded stub is proposed and the effects of changing the dimensions of the slot area, the stub and load sizes are considered in this paper. These parameters have a considerable effect on the antenna characteristics as well as its performance. An in-depth parametric study of these dimensions is presented. This paper proposes the necessary conditions for initial approximation of dimensions needed to design this antenna. In order to achieve the desired performance of the antenna fine tuning of all sizes of these parameters is required. The parametric studies used in this paper provide proper trends for initiation and tuning the design. A prototype of the antenna for 1.7GHz to 2.6GHz band is fabricated. Measurements conducted verify that the designed antenna has wideband characteristics with 50% bandwidth around the center frequency of 2.1GHz. Conducted measurements for reflection coefficient (S11) and radiation pattern also validate our simulation results. PMID:28114354

The Parametric Study and Fine-Tuning of Bow-Tie Slot Antenna with Loaded Stub.

PubMed

Shafiei, M M; Moghavvemi, Mahmoud; Wan Mahadi, Wan Nor Liza

2017-01-01

A printed Bow-Tie slot antenna with loaded stub is proposed and the effects of changing the dimensions of the slot area, the stub and load sizes are considered in this paper. These parameters have a considerable effect on the antenna characteristics as well as its performance. An in-depth parametric study of these dimensions is presented. This paper proposes the necessary conditions for initial approximation of dimensions needed to design this antenna. In order to achieve the desired performance of the antenna fine tuning of all sizes of these parameters is required. The parametric studies used in this paper provide proper trends for initiation and tuning the design. A prototype of the antenna for 1.7GHz to 2.6GHz band is fabricated. Measurements conducted verify that the designed antenna has wideband characteristics with 50% bandwidth around the center frequency of 2.1GHz. Conducted measurements for reflection coefficient (S11) and radiation pattern also validate our simulation results.

Exploratory research for the development of a computer aided software design environment with the software technology program

NASA Technical Reports Server (NTRS)

Hardwick, Charles

1991-01-01

Field studies were conducted by MCC to determine areas of research of mutual interest to MCC and JSC. NASA personnel from the Information Systems Directorate and research faculty from UHCL/RICIS visited MCC in Austin, Texas to examine tools and applications under development in the MCC Software Technology Program. MCC personnel presented workshops in hypermedia, design knowledge capture, and design recovery on site at JSC for ISD personnel. The following programs were installed on workstations in the Software Technology Lab, NASA/JSC: (1) GERM (Graphic Entity Relations Modeler); (2) gIBIS (Graphic Issues Based Information System); and (3) DESIRE (Design Recovery tool). These applications were made available to NASA for inspection and evaluation. Programs developed in the MCC Software Technology Program run on the SUN workstation. The programs do not require special configuration, but they will require larger than usual amounts of disk space and RAM to operate properly.

Protein crystal growth in low gravity

NASA Technical Reports Server (NTRS)

Feigelson, Robert S.

1990-01-01

The effect of low gravity on the growth of protein crystals and those parameters which will affect growth and crystal quality was studied. The proper design of the flight hardware and experimental protocols are highly dependent on understanding the factors which influence the nucleation and growth of crystals of biological macromolecules. Thus, those factors are investigated and the body of knowledge which has been built up for small molecule crystallization. These data also provide a basis of comparison for the results obtained from low-g experiments. The flows around growing crystals are detailed. The preliminary study of the growth of isocitrate lyase, the crystal morphologies found and the preliminary x ray results are discussed. The design of two apparatus for protein crystal growth by temperature control are presented along with preliminary results.

Design scenarios for renovation of sports complex: a case study

NASA Astrophysics Data System (ADS)

Nižetić, S.

2018-02-01

This paper elaborates design scenarios for a sports complex in Croatia from a technical and economic aspect. Different energy options are analysed and two are additionally addressed and discussed as the most viable ones. The possibilities of sports complex renovation are shown by properly choosing the appropriate energy concept and thus reducing the overall cost for produced thermal energy by around 33% and reducing the carbon dioxide emission by a factor of 1.8 in comparison with its present state. Finally, this study presents an example of good practice, where renewable energy solutions can be proposed and where it is possible to cover around 70-80% of overall yearly costs from achieved energy savings for the novel plant that is assumed to be financed through a bank loan.

Design Characteristics Influence Performance of Clinical Prediction Rules in Validation: A Meta-Epidemiological Study

PubMed Central

Ban, Jong-Wook; Emparanza, José Ignacio; Urreta, Iratxe; Burls, Amanda

2016-01-01

Background Many new clinical prediction rules are derived and validated. But the design and reporting quality of clinical prediction research has been less than optimal. We aimed to assess whether design characteristics of validation studies were associated with the overestimation of clinical prediction rules’ performance. We also aimed to evaluate whether validation studies clearly reported important methodological characteristics. Methods Electronic databases were searched for systematic reviews of clinical prediction rule studies published between 2006 and 2010. Data were extracted from the eligible validation studies included in the systematic reviews. A meta-analytic meta-epidemiological approach was used to assess the influence of design characteristics on predictive performance. From each validation study, it was assessed whether 7 design and 7 reporting characteristics were properly described. Results A total of 287 validation studies of clinical prediction rule were collected from 15 systematic reviews (31 meta-analyses). Validation studies using case-control design produced a summary diagnostic odds ratio (DOR) 2.2 times (95% CI: 1.2–4.3) larger than validation studies using cohort design and unclear design. When differential verification was used, the summary DOR was overestimated by twofold (95% CI: 1.2 -3.1) compared to complete, partial and unclear verification. The summary RDOR of validation studies with inadequate sample size was 1.9 (95% CI: 1.2 -3.1) compared to studies with adequate sample size. Study site, reliability, and clinical prediction rule was adequately described in 10.1%, 9.4%, and 7.0% of validation studies respectively. Conclusion Validation studies with design shortcomings may overestimate the performance of clinical prediction rules. The quality of reporting among studies validating clinical prediction rules needs to be improved. PMID:26730980

Design Characteristics Influence Performance of Clinical Prediction Rules in Validation: A Meta-Epidemiological Study.

PubMed

Ban, Jong-Wook; Emparanza, José Ignacio; Urreta, Iratxe; Burls, Amanda

2016-01-01

Many new clinical prediction rules are derived and validated. But the design and reporting quality of clinical prediction research has been less than optimal. We aimed to assess whether design characteristics of validation studies were associated with the overestimation of clinical prediction rules' performance. We also aimed to evaluate whether validation studies clearly reported important methodological characteristics. Electronic databases were searched for systematic reviews of clinical prediction rule studies published between 2006 and 2010. Data were extracted from the eligible validation studies included in the systematic reviews. A meta-analytic meta-epidemiological approach was used to assess the influence of design characteristics on predictive performance. From each validation study, it was assessed whether 7 design and 7 reporting characteristics were properly described. A total of 287 validation studies of clinical prediction rule were collected from 15 systematic reviews (31 meta-analyses). Validation studies using case-control design produced a summary diagnostic odds ratio (DOR) 2.2 times (95% CI: 1.2-4.3) larger than validation studies using cohort design and unclear design. When differential verification was used, the summary DOR was overestimated by twofold (95% CI: 1.2 -3.1) compared to complete, partial and unclear verification. The summary RDOR of validation studies with inadequate sample size was 1.9 (95% CI: 1.2 -3.1) compared to studies with adequate sample size. Study site, reliability, and clinical prediction rule was adequately described in 10.1%, 9.4%, and 7.0% of validation studies respectively. Validation studies with design shortcomings may overestimate the performance of clinical prediction rules. The quality of reporting among studies validating clinical prediction rules needs to be improved.

Design and Evaluation of Ergonomic Interventions for the Prevention of Musculoskeletal Disorders in India

PubMed Central

2014-01-01

Background Improper workstation, work procedures and tools are found to be the risk factors for the development of musculoskeletal disorders among the informal sector workers of the developing countries. Low cost ergonomic interventions can effectively improve such adverse conditions. Case presentation In the present article some studies related to design interventions in different informal and agricultural sectors were discussed and their efficacies were analyzed. It was observed that with the help of appropriate interventions musculoskeletal disorders were reduced, adverse physiological conditions were improved when awkward postures were corrected and ultimately the organisational productivity was increased. Conclusion Proper implementation of ergonomic interventions can ultimately improve the economy of the nation. PMID:25009740

20 CFR 30.722 - How are subpoenas or advisory opinions obtained?

Code of Federal Regulations, 2010 CFR

2010-04-01

... medical standards, medical ethics or medical regulation to a competent recognized or professional organization or federal, state or local regulatory agency may be made: (1) As to an issue properly designated...

47 CFR 78.51 - Remote control operation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... necessary to insure proper operation. (4) The control circuits shall be so designed and installed that short circuits, open circuits, other line faults, or any other cause which would result in loss of control of the...

Development of a prototype geotechnical report.

DOT National Transportation Integrated Search

2014-12-01

Archive geotechnical reports in the department contain valuable information such as site maps, : photographs, borehole data, laboratory and field test data, and design analyses. A proper use of the : information may bring significant cost saving for ...

Bringing Golf Links Up to Par

ERIC Educational Resources Information Center

Fream, Ronald

1976-01-01

When the process of remodeling a golf course is undertaken with professional and thorough planning, creative design, and proper construction techniques, the finished product can provide many years of challenging and esthetically pleasing golf play. (JD)

PHARMACEUTICAL CARE FORM APPLICATION IN ELDERLY PATIENTS RESEARCH.

PubMed

Waszyk-Nowaczyk, Magdalena; Blaszczyk, Klaudia; Michalak, Michal; Simon, Marek

2016-09-01

Many patients, especially elderly, very often don't inform family physicians about drugs prescribed by other specialist and use a number of preparations to self-medicate. These actions may supply negative consequences in recovery process and can be significantly reduced through the implementation of a well-run pharmaceutical care (PC) in the community pharmacy. Therefore, it is necessary to design proper PC documentation, which allows for comprehensive gathering information needed to carry out the analysis of relevant factors impacting on the prescribed pharmacotherapy effectiveness. The aim of this study was to develop the proper documentation to conduct PC in community pharmacy and verification of its correctness in the group of elderly patients, who is receiving treatment from family physician and additionally at least two specialized doctors. Also an assessment of PC implementation validity as a specialized service was presented. A study was carried out from January 2014 to June 2015. The research covered 54 elderly (41.0% men and 59.0% women) in Jarocin (Poland). Pharmacist was filling in the designed PC form, which subsequently was analyzed mainly for pharmacotherapy problems. The study indicated that 48.1% of patients were counselled by at least 3 specialists; 66.7% of patients were treated by cardiologist and 55.6% by the ophthalmologist; 75.9% of participants had hypertension. 42.6% of the patients used 10 or more pharmaceuticals and 24.1% took 8 or 9 drugs. Moreover, 20.4% of participants used drugs irregularly and 7.4% of them took too low doses of medications. Additionally, during the pharmacotherapy analysis, very significant and significant drug-drug interactions were noticed (1.1% and 18.4%, respectively). Very significant drug-food interactions occurred in 1.4% cases and significant in 3.3% cases. Total number of detected interactions were 553. The substantial analysis of participants' data allowed for 48 patients selection for pharmaceutical counselling. Six patients were involved into the group where PC process was reasonable. These patients often used 10 or more drugs (p = 0.0026), discontinued using medication without doctor consulting (p = 0.0201) and did not follow up the prescribed pharmacotherapy (p = 0.0351). This study provides new data about implementation of PC in Poland. The designed PC documentation may be helpful for proper analysis of the patient's pharmacotherapy to avoid drug problems and to improve elderly patients' quality of life. This project may contribute to PC implementation in Polish community pharmacy.

SIMULATION AND VISUALIZATION OF FLOW PATTERN IN MICROARRAYS FOR LIQUID PHASE OLIGONUCLEOTIDE AND PEPTIDE SYNTHESIS

PubMed Central

O-Charoen, Sirimon; Srivannavit, Onnop; Gulari, Erdogan

2008-01-01

Microfluidic microarrays have been developed for economical and rapid parallel synthesis of oligonucleotide and peptide libraries. For a synthesis system to be reproducible and uniform, it is crucial to have a uniform reagent delivery throughout the system. Computational fluid dynamics (CFD) is used to model and simulate the microfluidic microarrays to study geometrical effects on flow patterns. By proper design geometry, flow uniformity could be obtained in every microreactor in the microarrays. PMID:17480053

Cost Analysis of the Discrete Address Beacon System for the Low-Performance General Aviation Aircraft Community.

DTIC Science & Technology

1981-09-01

power supplies of the transponder to pro - vide a maximum 23.5 dBW power output. Tables 3-5 and 3-6 present the cost development for this configuration...configurations studied the cavity oscillator tube provides the necessary output characteristics for proper operation of the DABS transponder. Power supplies ...however, are affected by each configuration. The power supply was designed to provide 141 watts peak power at the antenna and sufficient capacity in

Clinical trials finance and operations.

PubMed

O'Brien, Jennifer A

2007-01-01

The National Coverage Decision of 2000 was designed to enhance the participation in clinical trials for both patients and physicians by mandating the governmental coverage for services in a clinical trial that are considered "routine" regardless of the trial. Participation in clinical trials can be a practice builder as well as a contribution to the betterment of medical science. Without proper coverage analysis, study budgeting, accurate time estimates, and effective negotiation prior to signing the contract, participation in clinical trials can cost a practice rather than benefit it.

[Relations between health information systems and patient safety].

PubMed

Nøhr, Christian

2012-11-05

Health information systems have the potential to reduce medical errors, and indeed many studies have shown a significant reduction. However, if the systems are not designed and implemented properly, there is evidence that suggest that new types of errors will arise--i.e., technology-induced errors. Health information systems will need to undergo a more rigorous evaluation. Usability evaluation and simulation test with humans in the loop can help to detect and prevent technology-induced errors before they are deployed in real health-care settings.

Comparison of box-wing and conventional aircraft mission performance using multidisciplinary analysis and optimization

DOE PAGES

Andrews, Stephen A.; Perez, Ruben E.

2018-06-04

Box-wing aircraft designs have the potential to achieve significant reductions in fuel consumption. Closed non-planar wing designs have been shown to reduce induced drag and the statically indeterminate wing structure can lead to reduced wing weight. In addition, the streamwise separation of the two main wings can provide the moments necessary for static stability and control, eliminating the weight and aerodynamic drag of a horizontal tail. Proper assessment of the disciplinary interactions in box-wing designs is essential to determine any realistic performance benefits arising from the use of such a configuration. This study analyzes both box-wing and conventional aircraft designedmore » for representative regional-jet missions. A preliminary parametric investigation shows a lift-to-drag ratio advantage for box-wing designs, while a more detailed multidisciplinary study indicates that the requirement to carry the mission fuel in the wings leads to an increase of between 5% and 1% in total fuel burn compared to conventional designs. Furthermore, the multidisciplinary study identified operating conditions where the box-wing can have superior performance to conventional aircraft despite the fuel volume constraint.« less

Comparison of box-wing and conventional aircraft mission performance using multidisciplinary analysis and optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrews, Stephen A.; Perez, Ruben E.

Box-wing aircraft designs have the potential to achieve significant reductions in fuel consumption. Closed non-planar wing designs have been shown to reduce induced drag and the statically indeterminate wing structure can lead to reduced wing weight. In addition, the streamwise separation of the two main wings can provide the moments necessary for static stability and control, eliminating the weight and aerodynamic drag of a horizontal tail. Proper assessment of the disciplinary interactions in box-wing designs is essential to determine any realistic performance benefits arising from the use of such a configuration. This study analyzes both box-wing and conventional aircraft designedmore » for representative regional-jet missions. A preliminary parametric investigation shows a lift-to-drag ratio advantage for box-wing designs, while a more detailed multidisciplinary study indicates that the requirement to carry the mission fuel in the wings leads to an increase of between 5% and 1% in total fuel burn compared to conventional designs. Furthermore, the multidisciplinary study identified operating conditions where the box-wing can have superior performance to conventional aircraft despite the fuel volume constraint.« less

Treatment of Proper Name Retrieval Deficits in an Individual with Temporal Lobe Epilepsy

ERIC Educational Resources Information Center

Minkina, Irene; Ojemann, Jeffrey G.; Grabowski, Thomas J.; Silkes, JoAnn P.; Phatak, Vaishali; Kendall, Diane L.

2013-01-01

Purpose: Studies investigating language deficits in individuals with left temporal-lobe epilepsy have consistently demonstrated impairments in proper name retrieval. The aim of this Phase I rehabilitation study was to investigate the effects of a linguistically distributed word retrieval treatment on proper name retrieval in an individual with…

Will future helicopters be diesel powered

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1982-05-01

An investigator has found that, if current gas turbine engines in helicopters are replaced by compound adiabatic diesel engines, fuel savings of 40% are possible. This would hold true if the diesel engines are retrofitted to the current helicopter fleet or adapted to new helicopter designs. Problems such as engine placement, weight, and lubrication exist but may be surmountable with proper design.

An Instructional Design Model for Developing a Computer Curriculum To Increase Employee Productivity in a Pharmaceutical Company.

ERIC Educational Resources Information Center

Stumpf, Mark R.

This report presents an instructional design model that was developed for use by the End-Users Computing department of a large pharmaceutical company in developing effective--but not lengthy--microcomputer training seminars to train office workers and executives in the proper use of computers and thus increase their productivity. The 14 steps of…

Effects of Digital Teaching on the Thinking Styles and the Transfer of Learning of the Students in Department of Interior Design

ERIC Educational Resources Information Center

Liu, Kuang Sheng; Hsueh, Sung-Lin

2016-01-01

Along with the constant advance of information technology and the rapid development of the Internet, the diverse functions and characteristics of e-learning break through lots of limitations in traditional instruction. Properly integrating e-learning design with Internet activities could enhance students' learning effect, and applying digital…

Graphic Design: A Sustainable Solution to Manage the Contents of Teaching Materials

ERIC Educational Resources Information Center

Victor, Garcia Izaguirre; Luisa, Pier Castello Maria; Eduardo, Arvizu Sanchez

2010-01-01

There is a concern that the teaching of subjects is applied not only with support from a set of technological devices, but largely in the proper use of teaching and new technologies. Taking this idea, the authors develop a research and sustainable design that result in educational materials in solid content and technological innovation, also to…

Flight simulation for flight control computer S/N 0104-1 (ASTP)

NASA Technical Reports Server (NTRS)

1975-01-01

Flight control computer (FCC) 0104-I has been designated the prime unit for the SA-210 launch vehicle. The results of the final flight simulation for FCC S/N 0104-I are documented. These results verify satisfactory implementation of the design release and proper interfacing of the FCC with flight-type control sensor elements and simulated thrust vector control system.

Sensor design for outdoor racing bicycle field testing for human vibration comfort evaluation

NASA Astrophysics Data System (ADS)

Vanwalleghem, Joachim; De Baere, Ives; Loccufier, Mia; Van Paepegem, Wim

2013-09-01

This paper is concerned with the vibrational comfort evaluation of the cyclist when cycling a rough surface. Outdoor comfort tests have so far only been done through instrumenting the bicycle with accelerometers. This work instruments a racing bicycle with custom-made contact force sensors and velocity sensors to acquire human comfort through the absorbed power method. Comfort evaluation is assessed at the hand-arm and seat interface of the cyclist with the bicycle. By means of careful finite-element analysis for designing the force gauges at the handlebar and the seat combined with precise calibration of both force and velocity sensors, all sensors have proven to work properly. Initial field tests are focused on the proper functioning of the designed sensors and their suitability for vibration comfort measurements. Tests on a cobblestone road reveal that the outcome of the absorbed power values is within the same range as those from laboratory tests found in the literature. This sensor design approach for outdoor testing with racing bicycles may give a new interpretation on evaluating the cyclist's comfort since the vibrational load is not only quantified in terms of acceleration but also in terms of force and velocity at the bicycle-cyclist contact points.

Advanced Design Features of APR1400 and Realization in Shin Kori Construction Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

OH, S.J.; Park, K.C.; Kim, H.G.

2006-07-01

APR1400 adopted several advanced design features. To ensure their proper operation as a part of ShinKori 3,4 project, both experimental and analytical work are continuing. In this paper, work on the advanced design features related to enhanced safety is examined. APR1400 safety injection system consists of four independent trains which include four safety injection pump and tanks. A passive flow regulating device called fluidic device is installed in the safety injection tanks. Separate effect tests including a full scale fluidic device tests have been conducted. Integral system tests are in progress. Combination of these work with the analytical work usingmore » RELAP5/Mod3 would ensure the proper operation of the new safety injection systems. To mitigate severe accidents, hydrogen mitigation system using PARs and igniters is adopted. Also, active injection system and the streamlined insulation design are adopted to enhance the in-vessel retention capability with the external cooling of RPV strategy. Analytic work with supporting experiments is performed. We are certain that these preparatory work would help the successful adaptation of ADF in ShinKori project. (authors)« less

A data-driven approach to quality risk management.

PubMed

Alemayehu, Demissie; Alvir, Jose; Levenstein, Marcia; Nickerson, David

2013-10-01

An effective clinical trial strategy to ensure patient safety as well as trial quality and efficiency involves an integrated approach, including prospective identification of risk factors, mitigation of the risks through proper study design and execution, and assessment of quality metrics in real-time. Such an integrated quality management plan may also be enhanced by using data-driven techniques to identify risk factors that are most relevant in predicting quality issues associated with a trial. In this paper, we illustrate such an approach using data collected from actual clinical trials. Several statistical methods were employed, including the Wilcoxon rank-sum test and logistic regression, to identify the presence of association between risk factors and the occurrence of quality issues, applied to data on quality of clinical trials sponsored by Pfizer. ONLY A SUBSET OF THE RISK FACTORS HAD A SIGNIFICANT ASSOCIATION WITH QUALITY ISSUES, AND INCLUDED: Whether study used Placebo, whether an agent was a biologic, unusual packaging label, complex dosing, and over 25 planned procedures. Proper implementation of the strategy can help to optimize resource utilization without compromising trial integrity and patient safety.

The review on tessellation origami inspired folded structure

NASA Astrophysics Data System (ADS)

Chu, Chai Chen; Keong, Choong Kok

2017-10-01

Existence of folds enhances the load carrying capacity of a folded structure which makes it suitable to be used for application where large open space is required such as large span roof structures and façade. Folded structure is closely related to origami especially the tessellation origami. Tessellation origami provides a folded configuration with facetted surface as a result from repeated folding pattern. Besides that, tessellation origami has flexible folding mechanism that produced a variety of 3-dimensional folded configurations. Despite the direct relationship between fold in origami and folded structure, the idea of origami inspired folded structure is not properly reviewed in the relevant engineering field. Hence, this paper aims to present the current studies from related discipline which has direct relation with application of tessellation origami in folded structure. First, tessellation origami is properly introduced and defined. Then, the review covers the topic on the origami tessellation design suitable for folded structure, its modeling and simulation method, and existing studies and applications of origami as folded structure is presented. The paper also includes the discussion on the current issues related to each topic.

Blue Marble: Remote Characterization of Habitable Planets

NASA Technical Reports Server (NTRS)

Woolf, Neville; Lewis, Brian; Chartres, James; Genova, Anthony

2009-01-01

The study of the nature and distribution of habitable environments beyond the Solar System is a key area for Astrobiology research. At the present time, our Earth is the only habitable planet that can be characterized in the same way that we might characterize planets beyond the Solar System. Due to limitations in our current and near-future technology, it is likely that extra-solar planets will be observed as single-pixel objects. To understand this data, we must develop skills in analyzing and interpreting the radiation obtained from a single pixel. These skills must include the study of the time variation of the radiation, and the range of its photometric, spectroscopic and polarimetric properties. In addition, to understand whether we are properly analyzing the single pixel data, we need to compare it with a ground truth of modest resolution images in key spectral bands. This paper discusses the concept for a mission called Blue Marble that would obtain data of the Earth using a combination of spectropolarimetry, spectrophotometry, and selected band imaging. To obtain imagery of the proper resolution, it is desirable to place the Blue Marble spacecraft no closer than the outer region of cis-lunar space. This paper explores a conceptual mission design that takes advantage of low-cost launchers, bus designs and mission elements to provide a cost effective observing platform located at one of the stable Earth-moon Lagrangian points (L4, L5). The mission design allows for the development and use of novel technologies, such as a spinning moon sensor for attitude control, and leverages lessons-learned from previous low-cost spacecraft such as Lunar Prospector to yield a low-risk mission concept.

Automated a complex computer aided design concept generated using macros programming

NASA Astrophysics Data System (ADS)

Rizal Ramly, Mohammad; Asrokin, Azharrudin; Abd Rahman, Safura; Zulkifly, Nurul Ain Md

2013-12-01

Changing a complex Computer Aided design profile such as car and aircraft surfaces has always been difficult and challenging. The capability of CAD software such as AutoCAD and CATIA show that a simple configuration of a CAD design can be easily modified without hassle, but it is not the case with complex design configuration. Design changes help users to test and explore various configurations of the design concept before the production of a model. The purpose of this study is to look into macros programming as parametric method of the commercial aircraft design. Macros programming is a method where the configurations of the design are done by recording a script of commands, editing the data value and adding a certain new command line to create an element of parametric design. The steps and the procedure to create a macro programming are discussed, besides looking into some difficulties during the process of creation and advantage of its usage. Generally, the advantages of macros programming as a method of parametric design are; allowing flexibility for design exploration, increasing the usability of the design solution, allowing proper contained by the model while restricting others and real time feedback changes.

Reflecting metallic metasurfaces designed with stochastic optimization as waveplates for manipulating light polarization

NASA Astrophysics Data System (ADS)

Haberko, Jakub; Wasylczyk, Piotr

2018-03-01

We demonstrate that a stochastic optimization algorithm with a properly chosen, weighted fitness function, following a global variation of parameters upon each step can be used to effectively design reflective polarizing optical elements. Two sub-wavelength metallic metasurfaces, corresponding to broadband half- and quarter-waveplates are demonstrated with simple structure topology, a uniform metallic coating and with the design suited for the currently available microfabrication techniques, such as ion milling or 3D printing.

LARM PKM solutions for torso design in humanoid robots

NASA Astrophysics Data System (ADS)

Ceccarelli, Marco

2014-12-01

Human-like torso features are essential in humanoid robots. In this paper problems for design and operation of solutions for a robotic torso are discussed by referring to experiences and designs that have been developed at Laboratory of Robotics and Mechatronics (LARM) in Cassino, Italy. A new solution is presented with conceptual views as waist-trunk structure that makes a proper partition of the performance for walking and arm operations as sustained by a torso.

Structural Analysis Using Computer Based Methods

NASA Technical Reports Server (NTRS)

Dietz, Matthew R.

2013-01-01

The stiffness of a flex hose that will be used in the umbilical arms of the Space Launch Systems mobile launcher needed to be determined in order to properly qualify ground umbilical plate behavior during vehicle separation post T-0. This data is also necessary to properly size and design the motors used to retract the umbilical arms. Therefore an experiment was created to determine the stiffness of the hose. Before the test apparatus for the experiment could be built, the structure had to be analyzed to ensure it would not fail under given loading conditions. The design model was imported into the analysis software and optimized to decrease runtime while still providing accurate restlts and allow for seamless meshing. Areas exceeding the allowable stresses in the structure were located and modified before submitting the design for fabrication. In addition, a mock up of a deep space habitat and the support frame was designed and needed to be analyzed for structural integrity under different loading conditions. The load cases were provided by the customer and were applied to the structure after optimizing the geometry. Once again, weak points in the structure were located and recommended design changes were made to the customer and the process was repeated until the load conditions were met without exceeding the allowable stresses. After the stresses met the required factors of safety the designs were released for fabrication.

Impact of Fire Ventilation on General Ventilation in the Building

NASA Astrophysics Data System (ADS)

Zender-Świercz, Ewa; Telejko, Marek

2017-10-01

The fire of building is a threat to its users. The biggest threat is generation, during lifetime of fire, hot gases and smoke. The purpose of quick and efficient evacuation from the area covered by the fire, at first step the escape routes have to be secured from smokiness. The smoke ventilation systems are used for this purpose. The proper design and execution of smoke ventilation is important not only because of the safety, but also of the maintenance of comfort in the building at a time when there is no fire. The manuscript presents the effect of incorrectly realized smoke ventilation in the stairwell of the medium building. The analysis shows that the flaps of smoke ventilation located in the stairwell may have a significant impact on the proper functioning of mechanical ventilation in the period when there is no fire. The improperly installed or incorrect insulated components cause perturbation of air flow and they change pressure distribution in the building. The conclusion of the analysis is the need to include the entire technical equipment of the building during the design and realization of its individual elements. The impact of various installations at each other is very important, and the omission of any of them can cause disturbances in the proper work of another.

Update of membership and mean proper motion of open clusters from UCAC5 catalog

NASA Astrophysics Data System (ADS)

Dias, W. S.; Monteiro, H.; Assafin, M.

2018-06-01

We present mean proper motions and membership probabilities of individual stars for optically visible open clusters, which have been determined using data from the UCAC5 catalog. This follows our previous studies with the UCAC2 and UCAC4 catalogs, but now using improved proper motions in the GAIA reference frame. In the present study results were obtained for a sample of 1108 open clusters. For five clusters, this is the first determination of mean proper motion, and for the whole sample, we present results with a much larger number of identified astrometric member stars than on previous studies. It is the last update of our Open cluster Catalog based on proper motion data only. Future updates will count on astrometric, photometric and spectroscopic GAIA data as input for analyses.

Daisy Shooting Education. 10 Lesson Curriculum.

ERIC Educational Resources Information Center

Narcheaur, Mary Elizabeth; And Others

This instructor's manual is a ten lesson curriculum designed to instruct young shooters in the skills of proper gun handling and marksmanship. Gunology (knowledge of guns and ammunition) and rules for air rifle competition are also discussed. (CJ)

The SSME seal test program: Leakage tests for helically-grooved seals

NASA Technical Reports Server (NTRS)

Childs, D. W.

1983-01-01

Helically grooved annular seal configurations were tested in highly turbulent flow to determine if reduced leakage and enhanced stability would result from the pumping action of the seal. It was found that: (1) leakage of a helically grooved seals decreases with running speed; (2) leakage reduction due to increased running speed is greater at lower values of R sub a; (3) an asymptote for leakage reduction is indicated with increasing running speed; (4) leakage is reduced by reducing the ridge (minimum) and average clearances; (5) leakage increases with increasing pitch angles and with increasing groove depth. Plain seals with smooth rotors and stators will leak more than a helically grooved seal. It was also found that plain seals with a rough rotor and a rough stator leak less than a properly designed helically grooved seal. A properly designed helically grooved seal consumes at least twice as much power as a conventional annular seal.

Realization of 2:1 MUX using Mach Zhender Interferometer structure and its application in selection of output signal of MOEMS pressure and temperature sensor

NASA Astrophysics Data System (ADS)

Jindal, Sumit Kumar; Raghuwanshi, Sanjeev Kumar

2016-03-01

In this paper we have initially designed a circular diaphragm based MOEMS pressure sensor and a thermistor based temperature sensor. This has been done by the help of externally modulated LiNbO3 Mach Zhender Interferometer (MZI) which senses the input voltage signal and modulates it to give an output in the form of intensity of light. This output is then calibrated to understand the proper relation between the input applied and output measured. The next aspect has been the use of MZI to work as a 2:1 MUX where two input lines are -pressure signal and temperature signal. The arrangement of MZI is then modulated in such a way that based on the requirement it chooses the proper input signal and sends it to the output port for the measurement. The design has been simulated in Opti-BPM software.

Controllability analysis and decentralized control of a wet limestone flue gas desulfurization plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perales, A.L.V.; Ortiz, F.J.G.; Ollero, P.

2008-12-15

Presently, decentralized feedback control is the only control strategy used in wet limestone flue gas desulfurization (WLFGD) plants. Proper tuning of this control strategy is becoming an important issue in WLFGD plants because more stringent SO{sub 2} regulations have come into force recently. Controllability analysis is a highly valuable tool for proper design of control systems, but it has not been applied to WLFGD plants so far. In this paper a decentralized control strategy is designed and applied to a WLFGD pilot plant taking into account the conclusions of a controllability analysis. The results reveal that good SO{sub 2} controlmore » in WLFGD plants can be achieved mainly because the main disturbance of the process is well-aligned with the plant and interactions between control loops are beneficial to SO{sub 2} control.« less

Design of tunable thermo-optic C-band filter based on coated silicon slab

NASA Astrophysics Data System (ADS)

Pinhas, Hadar; Malka, Dror; Danan, Yossef; Sinvani, Moshe; Zalevsky, Zeev

2018-03-01

Optical filters are required to have narrow band-pass filtering in the spectral C-band for applications such as signal tracking, sub-band filtering or noise suppression. These requirements lead to a variety of filters such as Mach-Zehnder interferometer inter-leaver in silica, which offer thermo-optic effect for optical switching, however, without proper thermal and optical efficiency. In this paper we propose tunable thermo-optic filtering device based on coated silicon slab resonator with increased Q-factor for the C-band optical switching. The device can be designed either for long range wavelength tuning of for short range with increased wavelength resolution. Theoretical examination of the thermal parameters affecting the filtering process is shown together with experimental results. Proper channel isolation with an extinction ratio of 20dBs is achieved with spectral bandpass width of 0.07nm.

An adaptive tracking observer for failure-detection systems

NASA Technical Reports Server (NTRS)

Sidar, M.

1982-01-01

The design problem of adaptive observers applied to linear, constant and variable parameters, multi-input, multi-output systems, is considered. It is shown that, in order to keep the observer's (or Kalman filter) false-alarm rate (FAR) under a certain specified value, it is necessary to have an acceptable proper matching between the observer (or KF) model and the system parameters. An adaptive observer algorithm is introduced in order to maintain desired system-observer model matching, despite initial mismatching and/or system parameter variations. Only a properly designed adaptive observer is able to detect abrupt changes in the system (actuator, sensor failures, etc.) with adequate reliability and FAR. Conditions for convergence for the adaptive process were obtained, leading to a simple adaptive law (algorithm) with the possibility of an a priori choice of fixed adaptive gains. Simulation results show good tracking performance with small observer output errors and accurate and fast parameter identification, in both deterministic and stochastic cases.

Designing a Clinical Data Warehouse Architecture to Support Quality Improvement Initiatives.

PubMed

Chelico, John D; Wilcox, Adam B; Vawdrey, David K; Kuperman, Gilad J

2016-01-01

Clinical data warehouses, initially directed towards clinical research or financial analyses, are evolving to support quality improvement efforts, and must now address the quality improvement life cycle. In addition, data that are needed for quality improvement often do not reside in a single database, requiring easier methods to query data across multiple disparate sources. We created a virtual data warehouse at NewYork Presbyterian Hospital that allowed us to bring together data from several source systems throughout the organization. We also created a framework to match the maturity of a data request in the quality improvement life cycle to proper tools needed for each request. As projects progress in the Define, Measure, Analyze, Improve, Control stages of quality improvement, there is a proper matching of resources the data needs at each step. We describe the analysis and design creating a robust model for applying clinical data warehousing to quality improvement.

Designing a Clinical Data Warehouse Architecture to Support Quality Improvement Initiatives

PubMed Central

Chelico, John D.; Wilcox, Adam B.; Vawdrey, David K.; Kuperman, Gilad J.

2016-01-01

Clinical data warehouses, initially directed towards clinical research or financial analyses, are evolving to support quality improvement efforts, and must now address the quality improvement life cycle. In addition, data that are needed for quality improvement often do not reside in a single database, requiring easier methods to query data across multiple disparate sources. We created a virtual data warehouse at NewYork Presbyterian Hospital that allowed us to bring together data from several source systems throughout the organization. We also created a framework to match the maturity of a data request in the quality improvement life cycle to proper tools needed for each request. As projects progress in the Define, Measure, Analyze, Improve, Control stages of quality improvement, there is a proper matching of resources the data needs at each step. We describe the analysis and design creating a robust model for applying clinical data warehousing to quality improvement. PMID:28269833

Urine Pretreat Injection System

NASA Technical Reports Server (NTRS)

1995-01-01

A new method of introducing the OXONE (Registered Trademark) Monopersulfate Compound for urine pretreat into a two-phase urine/air flow stream has been successfully tested and evaluated. The feasibility of this innovative method has been established for purposes of providing a simple, convenient, and safe method of handling a chemical pretreat required for urine processing in a microgravity space environment. Also, the Oxone portion of the urine pretreat has demonstrated the following advantages during real time collection of 750 pounds of urine in a Space Station design two-phase urine Fan/Separator: Eliminated urine precipitate buildup on internal hardware and plumbing; Minimized odor from collected urine; and Virtually eliminated airborne bacteria. The urine pretreat, as presently defined for the Space Station program for proper downstream processing of urine, is a two-part chemical treatment of 5.0 grams of Oxone and 2.3 ml of H2SO4 per liter of urine. This study program and test demonstrated only the addition of the proper ratio of Oxone into the urine collection system upstream of the Fan/Separator. This program was divided into the following three major tasks: (1) A trade study, to define and recommend the type of Oxone injection method to pursue further; (2) The design and fabrication of the selected method; and (3) A test program using high fidelity hardware and fresh urine to demonstrate the method feasibility. The trade study was conducted which included defining several methods for injecting Oxone in different forms into a urine system. Oxone was considered in a liquid, solid, paste and powered form. The trade study and the resulting recommendation were presented at a trade study review held at Hamilton Standard on 24-25 October 94. An agreement was reached at the meeting to continue the solid tablet in a bag concept which included a series of tablets suspended in the urine/air flow stream. These Oxone tablets would slowly dissolve at a controlled rate providing the proper concentration in the collected urine. To implement the solid tablet in a bag approach, a design concept was completed with prototype drawings of the complete urine pretreat prefilter assembly. A successful fabrication technique was developed for retaining the Oxone tablets in a fabric casing attached to the end of the existing Space Station Waste Collection System urine prefilter assembly. The final pretreat prefilter configuration held sufficient Oxone in a tablet form to allow normal scheduled daily (or twice daily) change out of the urine filter depending on the use rate of the Space Station urine collection system. The actual tests to prove the concept were conducted using the Urine Fan/Separator assembly that was originally used in the STS-52 Design Test Objective (DTO) urinal assembly. Other related tests were conducted to demonstrate the actual minimum ratio of Oxone to urine that will control microbial growth.

Prospective power calculations for the Four Lab study of a multigenerational reproductive/developmental toxicity rodent bioassay using a complex mixture of disinfection by-products in the low-response region.

PubMed

Dingus, Cheryl A; Teuschler, Linda K; Rice, Glenn E; Simmons, Jane Ellen; Narotsky, Michael G

2011-10-01

In complex mixture toxicology, there is growing emphasis on testing environmentally representative doses that improve the relevance of results for health risk assessment, but are typically much lower than those used in traditional toxicology studies. Traditional experimental designs with typical sample sizes may have insufficient statistical power to detect effects caused by environmentally relevant doses. Proper study design, with adequate statistical power, is critical to ensuring that experimental results are useful for environmental health risk assessment. Studies with environmentally realistic complex mixtures have practical constraints on sample concentration factor and sample volume as well as the number of animals that can be accommodated. This article describes methodology for calculation of statistical power for non-independent observations for a multigenerational rodent reproductive/developmental bioassay. The use of the methodology is illustrated using the U.S. EPA's Four Lab study in which rodents were exposed to chlorinated water concentrates containing complex mixtures of drinking water disinfection by-products. Possible experimental designs included two single-block designs and a two-block design. Considering the possible study designs and constraints, a design of two blocks of 100 females with a 40:60 ratio of control:treated animals and a significance level of 0.05 yielded maximum prospective power (~90%) to detect pup weight decreases, while providing the most power to detect increased prenatal loss.

Prospective Power Calculations for the Four Lab Study of A Multigenerational Reproductive/Developmental Toxicity Rodent Bioassay Using A Complex Mixture of Disinfection By-Products in the Low-Response Region

PubMed Central

Dingus, Cheryl A.; Teuschler, Linda K.; Rice, Glenn E.; Simmons, Jane Ellen; Narotsky, Michael G.

2011-01-01

In complex mixture toxicology, there is growing emphasis on testing environmentally representative doses that improve the relevance of results for health risk assessment, but are typically much lower than those used in traditional toxicology studies. Traditional experimental designs with typical sample sizes may have insufficient statistical power to detect effects caused by environmentally relevant doses. Proper study design, with adequate statistical power, is critical to ensuring that experimental results are useful for environmental health risk assessment. Studies with environmentally realistic complex mixtures have practical constraints on sample concentration factor and sample volume as well as the number of animals that can be accommodated. This article describes methodology for calculation of statistical power for non-independent observations for a multigenerational rodent reproductive/developmental bioassay. The use of the methodology is illustrated using the U.S. EPA’s Four Lab study in which rodents were exposed to chlorinated water concentrates containing complex mixtures of drinking water disinfection by-products. Possible experimental designs included two single-block designs and a two-block design. Considering the possible study designs and constraints, a design of two blocks of 100 females with a 40:60 ratio of control:treated animals and a significance level of 0.05 yielded maximum prospective power (~90%) to detect pup weight decreases, while providing the most power to detect increased prenatal loss. PMID:22073030

Shed a light of wireless technology on portable mobile design of NIRS

NASA Astrophysics Data System (ADS)

Sun, Yunlong; Li, Ting

2016-03-01

Mobile internet is growing rapidly driven by high-tech companies including the popular Apple and Google. The wireless mini-NIRS is believed to deserve a great spread future, while there is sparse report on wireless NIRS device and even for the reported wireless NIRS, its wireless design is scarcely presented. Here we focused on the wireless design of NIRS devices. The widely-used wireless communication standards and wireless communication typical solutions were employed into our NIRS design and then compared on communication efficiency, distance, error rate, low-cost, power consumption, and stabilities, based on the requirements of NIRS applications. The properly-performed wireless communication methods matched with the characteristics of NIRS are picked out. Finally, we realized one recommended wireless communication in our NIRS, developed a test platform on wireless NIRS and tested the full properties on wireless communication. This study elaborated the wireless communication methods specified for NIRS and suggested one implementation with one example fully illustrated, which support the future mobile design on NIRS devices.

Split torque transmission load sharing

NASA Technical Reports Server (NTRS)

Krantz, T. L.; Rashidi, M.; Kish, J. G.

1992-01-01

Split torque transmissions are attractive alternatives to conventional planetary designs for helicopter transmissions. The split torque designs can offer lighter weight and fewer parts but have not been used extensively for lack of experience, especially with obtaining proper load sharing. Two split torque designs that use different load sharing methods have been studied. Precise indexing and alignment of the geartrain to produce acceptable load sharing has been demonstrated. An elastomeric torque splitter that has large torsional compliance and damping produces even better load sharing while reducing dynamic transmission error and noise. However, the elastomeric torque splitter as now configured is not capable over the full range of operating conditions of a fielded system. A thrust balancing load sharing device was evaluated. Friction forces that oppose the motion of the balance mechanism are significant. A static analysis suggests increasing the helix angle of the input pinion of the thrust balancing design. Also, dynamic analysis of this design predicts good load sharing and significant torsional response to accumulative pitch errors of the gears.

Effective response of classical, auxetic and chiral magnetoelastic materials by use of a new variational principle

NASA Astrophysics Data System (ADS)

Danas, K.

2017-08-01

This work provides a rigorous analysis of the effective response, i.e., average magnetization and magnetostriction, of magnetoelastic composites that are subjected to overall magnetic and mechanical loads. It clarifies the differences between a coupled magnetomechanical analysis in which one applies a Eulerian (current) magnetic field and an electroactive one where the Lagrangian (reference) electric field is usually applied. For this, we propose an augmented vector potential variational formulation to carry out numerical periodic homogenization studies of magnetoelastic solids at finite strains and magnetic fields. We show that the developed variational principle can be used for bottom-up design of microstructures with desired magnetomechanical coupling by properly canceling out the macro-geometry and specimen shape effects. To achieve that, we properly treat the average Maxwell stresses arising from the medium surrounding the magnetoelastic representative volume element (RVE), while at the same time we impose a uniform average Eulerian and not Lagrangian magnetic field. The developed variational principle is then used to study a large number of ideal as well as more realistic two-dimensional microstructures. We study the effect of particle volume fraction, particle distribution and particle shape and orientation upon the effective magnetoelastic response at finite strains. We consider also unstructured isotropic microstructures based on random adsorption algorithms and we carry out a convergence study of the representativity of the proposed unit cells. Finally, three-phase two-dimensional auxetic microstructures are analyzed. The first consists of a periodic distribution of voids and particle chains in a polymer matrix, while the second takes advantage of particle shape and chirality to produce negative and positive swelling by proper change of the chirality and the applied magnetic field.

Design of a Pilot Plant for Vacuum Infusion of High Lipoidal Liquids into Dried Foods

DTIC Science & Technology

1988-07-01

on a conveyor belt equipped with a chiller hood. /". 20 DISTRIBUTION’AVAILABILITY OF ABSTRACT SUNCLASSlFlEn’VL’V’S:» Q jwj AS RB" U DtiC US...design is an optimization of design criteria, shown in Figure I. In addition to the basic design criteria, the equipment must operate within a...the desired setpoint . 2.2 Lipoidal Liquid Systems; The lipoidal liquid is provided at the proper conditions to the immersion dish from an

Investigation of Engineering and Design Considerations in Selecting Conveyors for Densified Refuse-Derived Fuel (dRDF) and dRDF: Coal Mixtures.

DTIC Science & Technology

1981-08-01

or discharge paths of material over the end pulley of a conveyor are important to the proper design and function of discharge chutes , wear plates or...8217 ’iESL-TR-81-58 INVESTIGATION OF ENGINEERING AND DESIGN CONSIDERATIONS IN SELECTING CONVEYORS FOR DENSIFIED REFUSE-DERIVED FUEL (dRDF) AND dRDF: COAL...Engineering and Design Final Report Considerations in Selecting Conveyors for JUN 1980 - SEP 1981 Densified Refuse-Derived Fuel (dRDF) and 6. PERFORMING ORG

Design, Qualification, and On Orbit Performance of the CALIPSO Aerosol Lidar Transmitter

NASA Technical Reports Server (NTRS)

Hovis, Floyd E.; Witt, Greg; Sullivan, Edward T.; Le, Khoa; Weimer, Carl; Applegate, Jeff; Luck, William S., Jr.; Verhapen, Ron; Cisewski, Michael S.

2007-01-01

The laser transmitter for the CALIPSO aerosol lidar mission has been operating on orbit as planned since June 2006. This document discusses the optical and laser system design and qualification process that led to this success. Space-qualifiable laser design guidelines included the use of mature laser technologies, the use of alignment sensitive resonator designs, the development and practice of stringent contamination control procedures, the operation of all optical components at appropriately derated levels, and the proper budgeting for the space-qualification of the electronics and software.

Proceedings of OSD Aircraft Engine Design & Life Cycle Cost Seminar Held at Naval Air Development Center, Warminster, Pennsylvania, May 17, 18 & 19, 1978,

DTIC Science & Technology

1978-01-01

AD-A092 043 NAVAL AIR DEVELOPMENT CENTER WARMINSTER PA F/6 2/ I PROCEEDINGS OF 050 AIRCRAFT ENGINE DESIGN & LIFE CYCLE COST SEN--ETC (U NSI FE 1978 R...4 STANDAHAR, R R SHOREY. A PRESSMAN N PROCEEDINGS OFOSD AIRCRAFT ENGINE DESIGN & LIFE CYCLE COST SEMINAR HELD AT ,NAVAL AIR DEVELOPMENT CENTER f...RELIABILITY CAN BE MET. THIS INFORMATION WILL BE USED BY THE ACQUISITION ACTIVITY TO ESTABLISH THE PROPER DESIGN AND TEST REQUIREMENTS TO INSURE THAT THE

An innovative approach to compensator design

NASA Technical Reports Server (NTRS)

Mitchell, J. R.; Mcdaniel, W. L., Jr.

1973-01-01

The design is considered of a computer-aided-compensator for a control system from a frequency domain point of view. The design technique developed is based on describing the open loop frequency response by n discrete frequency points which result in n functions of the compensator coefficients. Several of these functions are chosen so that the system specifications are properly portrayed; then mathematical programming is used to improve all of these functions which have values below minimum standards. To do this, several definitions in regard to measuring the performance of a system in the frequency domain are given, e.g., relative stability, relative attenuation, proper phasing, etc. Next, theorems which govern the number of compensator coefficients necessary to make improvements in a certain number of functions are proved. After this a mathematical programming tool for aiding in the solution of the problem is developed. This tool is called the constraint improvement algorithm. Then for applying the constraint improvement algorithm generalized, gradients for the constraints are derived. Finally, the necessary theory is incorporated in a Computer program called CIP (compensator Improvement Program). The practical usefulness of CIP is demonstrated by two large system examples.

Design study of toroidal traction CVT for electric vehicles

NASA Technical Reports Server (NTRS)

Raynard, A. E.; Kraus, J.; Bell, D. D.

1980-01-01

The development, evaluation, and optimization of a preliminary design concept for a continuously variable transmission (CVT) to couple the high-speed output shaft of an energy storage flywheel to the drive train of an electric vehicle is discussed. An existing computer simulation program was modified and used to compare the performance of five CVT design configurations. Based on this analysis, a dual-cavity full-toroidal drive with regenerative gearing is selected for the CVT design configuration. Three areas are identified that will require some technological development: the ratio control system, the traction fluid properities, and evaluation of the traction contact performance. Finally, the suitability of the selected CVT design concept for alternate electric and hybrid vehicle applications and alternate vehicle sizes and maximum output torques is determined. In all cases the toroidal traction drive design concept is applicable to the vehicle system. The regenerative gearing could be eliminated in the electric powered vehicle because of the reduced ratio range requirements. In other cases the CVT with regenerative gearing would meet the design requirements after appropriate adjustments in size and reduction gearing ratio.

Materials Safety - Not just Flammability and Toxic Offgassing

NASA Technical Reports Server (NTRS)

Pedley, Michael D.

2007-01-01

For many years, the safety community has focused on a limited subset of materials and processes requirements as key to safety: Materials flammability, Toxic offgassing, Propellant compatibility, Oxygen compatibility, and Stress-corrosion cracking. All these items are important, but the exclusive focus on these items neglects many other items that are equally important to materials safety. Examples include (but are not limited to): 1. Materials process control -- proper qualification and execution of manufacturing processes such as structural adhesive bonding, welding, and forging are crucial to materials safety. Limitation of discussions on materials process control to an arbitrary subset of processes, known as "critical processes" is a mistake, because any process where the quality of the product cannot be verified by inspection can potentially result in unsafe hardware 2 Materials structural design allowables -- development of valid design allowables when none exist in the literature requires extensive testing of multiple lots of materials and is extremely expensive. But, without valid allowables, structural analysis cannot verify structural safety 3. Corrosion control -- All forms of corrosion, not just stress corrosion, can affect structural integrity of hardware 4. Contamination control during ground processing -- contamination control is critical to manufacturing processes such as adhesive bonding and also to elimination foreign objects and debris (FOD) that are hazardous to the crew of manned spacecraft in microgravity environments. 5. Fasteners -- Fastener design, the use of verifiable secondary locking features, and proper verification of fastener torque are essential for proper structural performance This presentation discusses some of these key factors and the importance of considering them in ensuring the safety of space hardware.

Intervention studies to foster resilience - A systematic review and proposal for a resilience framework in future intervention studies.

PubMed

Chmitorz, A; Kunzler, A; Helmreich, I; Tüscher, O; Kalisch, R; Kubiak, T; Wessa, M; Lieb, K

2018-02-01

Psychological resilience refers to the phenomenon that many people are able to adapt to the challenges of life and maintain mental health despite exposure to adversity. This has stimulated research on training programs to foster psychological resilience. We evaluated concepts, methods and designs of 43 randomized controlled trials published between 1979 and 2014 which assessed the efficacy of such training programs and propose standards for future intervention research based on recent developments in the field. We found that concepts, methods and designs in current resilience intervention studies are of limited use to properly assess efficacy of interventions to foster resilience. Major problems are the use of definitions of resilience as trait or a composite of resilience factors, the use of unsuited assessment instruments, and inappropriate study designs. To overcome these challenges, we propose 1) an outcome-oriented definition of resilience, 2) an outcome-oriented assessment of resilience as change in mental health in relation to stressor load, and 3) methodological standards for suitable study designs of future intervention studies. Our proposals may contribute to an improved quality of resilience intervention studies and may stimulate further progress in this growing research field. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Transplant experiments uncover Baltic Sea basin-specific responses in bacterioplankton community composition and metabolic activities.

PubMed

Lindh, Markus V; Figueroa, Daniela; Sjöstedt, Johanna; Baltar, Federico; Lundin, Daniel; Andersson, Agneta; Legrand, Catherine; Pinhassi, Jarone

2015-01-01

Anthropogenically induced changes in precipitation are projected to generate increased river runoff to semi-enclosed seas, increasing loads of terrestrial dissolved organic matter and decreasing salinity. To determine how bacterial community structure and functioning adjust to such changes, we designed microcosm transplant experiments with Baltic Proper (salinity 7.2) and Bothnian Sea (salinity 3.6) water. Baltic Proper bacteria generally reached higher abundances than Bothnian Sea bacteria in both Baltic Proper and Bothnian Sea water, indicating higher adaptability. Moreover, Baltic Proper bacteria growing in Bothnian Sea water consistently showed highest bacterial production and beta-glucosidase activity. These metabolic responses were accompanied by basin-specific changes in bacterial community structure. For example, Baltic Proper Pseudomonas and Limnobacter populations increased markedly in relative abundance in Bothnian Sea water, indicating a replacement effect. In contrast, Roseobacter and Rheinheimera populations were stable or increased in abundance when challenged by either of the waters, indicating an adjustment effect. Transplants to Bothnian Sea water triggered the initial emergence of particular Burkholderiaceae populations, and transplants to Baltic Proper water triggered Alteromonadaceae populations. Notably, in the subsequent re-transplant experiment, a priming effect resulted in further increases to dominance of these populations. Correlated changes in community composition and metabolic activity were observed only in the transplant experiment and only at relatively high phylogenetic resolution. This suggested an importance of successional progression for interpreting relationships between bacterial community composition and functioning. We infer that priming effects on bacterial community structure by natural episodic events or climate change induced forcing could translate into long-term changes in bacterial ecosystem process rates.

Transplant experiments uncover Baltic Sea basin-specific responses in bacterioplankton community composition and metabolic activities

PubMed Central

Lindh, Markus V.; Figueroa, Daniela; Sjöstedt, Johanna; Baltar, Federico; Lundin, Daniel; Andersson, Agneta; Legrand, Catherine; Pinhassi, Jarone

2015-01-01

Anthropogenically induced changes in precipitation are projected to generate increased river runoff to semi-enclosed seas, increasing loads of terrestrial dissolved organic matter and decreasing salinity. To determine how bacterial community structure and functioning adjust to such changes, we designed microcosm transplant experiments with Baltic Proper (salinity 7.2) and Bothnian Sea (salinity 3.6) water. Baltic Proper bacteria generally reached higher abundances than Bothnian Sea bacteria in both Baltic Proper and Bothnian Sea water, indicating higher adaptability. Moreover, Baltic Proper bacteria growing in Bothnian Sea water consistently showed highest bacterial production and beta-glucosidase activity. These metabolic responses were accompanied by basin-specific changes in bacterial community structure. For example, Baltic Proper Pseudomonas and Limnobacter populations increased markedly in relative abundance in Bothnian Sea water, indicating a replacement effect. In contrast, Roseobacter and Rheinheimera populations were stable or increased in abundance when challenged by either of the waters, indicating an adjustment effect. Transplants to Bothnian Sea water triggered the initial emergence of particular Burkholderiaceae populations, and transplants to Baltic Proper water triggered Alteromonadaceae populations. Notably, in the subsequent re-transplant experiment, a priming effect resulted in further increases to dominance of these populations. Correlated changes in community composition and metabolic activity were observed only in the transplant experiment and only at relatively high phylogenetic resolution. This suggested an importance of successional progression for interpreting relationships between bacterial community composition and functioning. We infer that priming effects on bacterial community structure by natural episodic events or climate change induced forcing could translate into long-term changes in bacterial ecosystem process rates. PMID:25883589

Traditional versus rule-based programming techniques: Application to the control of optional flight information

NASA Technical Reports Server (NTRS)

Ricks, Wendell R.; Abbott, Kathy H.

1987-01-01

To the software design community, the concern over the costs associated with a program's execution time and implementation is great. It is always desirable, and sometimes imperative, that the proper programming technique is chosen which minimizes all costs for a given application or type of application. A study is described that compared cost-related factors associated with traditional programming techniques to rule-based programming techniques for a specific application. The results of this study favored the traditional approach regarding execution efficiency, but favored the rule-based approach regarding programmer productivity (implementation ease). Although this study examined a specific application, the results should be widely applicable.

Blue enhanced light sources: opportunities and risks

NASA Astrophysics Data System (ADS)

Lang, Dieter

2012-03-01

Natural daylight is characterized by high proportions of blue light. By proof of a third type of photoreceptor in the human eye which is only sensitive in this spectral region and by subsequent studies it has become obvious that these blue proportions are essential for human health and well being. In various studies beneficial effects of indoor lighting with higher blue spectral proportions have been proven. On the other hand with increasing use of light sources having enhanced blue light for indoor illumination questions are arising about potential health risks attributed to blue light. Especially LED are showing distinct emission characteristics in the blue. Recently the French agency for food, environmental and occupational health & safety ANSES have raised the question on health issues related to LED light sources and have claimed to avoid use of LED for lighting in schools. In this paper parameters which are relevant for potential health risks will be shown and their contribution to risk factors will quantitatively be discussed. It will be shown how to differentiate between photometric parameters for assessment of beneficial as well as hazardous effects. Guidelines will be discussed how blue enhanced light sources can be used in applications to optimally support human health and well being and simultaneously avoid any risks attributed to blue light by a proper design of lighting parameters. In the conclusion it will be shown that no inherent health risks are related to LED lighting with a proper lighting design.

Fatigue crack growth and life prediction under mixed-mode loading

NASA Astrophysics Data System (ADS)

Sajith, S.; Murthy, K. S. R. K.; Robi, P. S.

2018-04-01

Fatigue crack growth life as a function of crack length is essential for the prevention of catastrophic failures from damage tolerance perspective. In damage tolerance design approach, principles of fracture mechanics are usually applied to predict the fatigue life of structural components. Numerical prediction of crack growth versus number of cycles is essential in damage tolerance design. For cracks under mixed mode I/II loading, modified Paris law (d/a d N =C (ΔKe q ) m ) along with different equivalent stress intensity factor (ΔKeq) model is used for fatigue crack growth rate prediction. There are a large number of ΔKeq models available for the mixed mode I/II loading, the selection of proper ΔKeq model has significant impact on fatigue life prediction. In the present investigation, the performance of ΔKeq models in fatigue life prediction is compared with respect to the experimental findings as there are no guidelines/suggestions available on the selection of these models for accurate and/or conservative predictions of fatigue life. Within the limitations of availability of experimental data and currently available numerical simulation techniques, the results of present study attempt to outline models that would provide accurate and conservative life predictions. Such a study aid the numerical analysts or engineers in the proper selection of the model for numerical simulation of the fatigue life. Moreover, the present investigation also suggests a procedure to enhance the accuracy of life prediction using Paris law.

Cyber-Defense Return on Investment for NAVFAC Energy Technologies

DTIC Science & Technology

2017-12-01

Stakeholder input is important to properly develop a tool that reflects the legitimate concerns of those who routinely design , operate, and use control ...cybersecurity results with no control system network connectivity at all. Both are extreme scenarios, unless electrical engineers can design a...support of a Department of Defense (DOD) effort to improve cyber- security in relation to DOD installation control systems. Space and Naval Warfare

Rapid Slewing of Flexible Space Structures

DTIC Science & Technology

2015-09-01

axis gimbal with elastic joints. The performance of the system can be enhanced by designing antenna maneuvers in which the flexible effects are...the effects of the nonlinearities so the vibrational motion can be constrained for a time-optimal slew. It is shown that by constructing an...joints. The performance of the system can be enhanced by designing antenna maneuvers in which the flexible effects are properly constrained, thus

Review of Aircraft Engine Fan Noise Reduction

NASA Technical Reports Server (NTRS)

VanZante, Dale

2008-01-01

Aircraft turbofan engines incorporate multiple technologies to enhance performance and durability while reducing noise emissions. Both careful aerodynamic design of the fan and proper installation of the fan into the system are requirements for achieving the performance and acoustic objectives. The design and installation characteristics of high performance aircraft engine fans will be discussed along with some lessons learned that may be applicable to spaceflight fan applications.

Manual of design and installation of Forest Service water spray dry kiln

Treesearch

L.V. Teesdale

1920-01-01

The best thing that can be said of any dry kiln is that when it is run by a properly informed operator the temperature, humidity, and circulation are constant and uniform. In an endeavor to produce a kiln in which each of these could be regulated independently of the others, the Forest Products Laboratory designed and developed the "Forest Service Humidity...

Optimal design study of high efficiency indium phosphide space solar cells

NASA Technical Reports Server (NTRS)

Jain, Raj K.; Flood, Dennis J.

1990-01-01

Recently indium phosphide solar cells have achieved beginning of life AMO efficiencies in excess of 19 pct. at 25 C. The high efficiency prospects along with superb radiation tolerance make indium phosphide a leading material for space power requirements. To achieve cost effectiveness, practical cell efficiencies have to be raised to near theoretical limits and thin film indium phosphide cells need to be developed. The optimal design study is described of high efficiency indium phosphide solar cells for space power applications using the PC-1D computer program. It is shown that cells with efficiencies over 22 pct. AMO at 25 C could be fabricated by achieving proper material and process parameters. It is observed that further improvements in cell material and process parameters could lead to experimental cell efficiencies near theoretical limits. The effect of various emitter and base parameters on cell performance was studied.

Lightweight coaxial cable connector reduces signal loss

NASA Technical Reports Server (NTRS)

Brejcha, A. G., Jr.

1965-01-01

Connectors with milled interface surfaces for perfect electrical contact eliminate secondary- emission discharge and low signal loss in RF coaxial cables. the connectors which contain alignment and centering components for proper joint concentricity are used in communications systems designs.

40 CFR 2.213 - Designation by business of addressee for notices and inquiries.

Code of Federal Regulations, 2010 CFR

2010-07-01

... person or office; and a request that EPA inquiries and communications (oral and written) under this... as the proper addressee of communications from EPA to the business under this subpart may do so by...

40 CFR 745.83 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... with the manufacturer's instructions. Interim controls means a set of measures designed to temporarily... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED... disposable cleaning cloths with the card, whether post-renovation cleaning has been properly completed...

40 CFR 745.83 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... with the manufacturer's instructions. Interim controls means a set of measures designed to temporarily... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED... disposable cleaning cloths with the card, whether post-renovation cleaning has been properly completed...

40 CFR 745.83 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... with the manufacturer's instructions. Interim controls means a set of measures designed to temporarily... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED... disposable cleaning cloths with the card, whether post-renovation cleaning has been properly completed...

Thermal Runaway Severity Reduction Assessment and Implementation: On Li-Ion Batteries

NASA Technical Reports Server (NTRS)

Darcy, Eric

2015-01-01

Preventing cell-cell thermal runaway propagation and flames/sparks from exiting battery enclosure is possible with proper thermal & electrical design and cell thermal runaway ejecta/effluent management and can be had with minimal mass/volume penalty.

76 FR 55859 - Federal Motor Vehicle Safety Standards No. 121; Air Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

...- trailer on dry pavement, a highly skilled test driver may be able to achieve the shortest possible... maintained in proper working order, it would not provide the improved steering control as designed. That is...

Predicting damage in concrete due to expansive aggregates : modeling to enable sustainable material design.

DOT National Transportation Integrated Search

2012-04-01

A poroelastic model is developed that can predict stress and strain distributions and, thus, ostensibly : damage likelihood in concrete under freezing conditions caused by aggregates with undesirable : combinations of geometry and constitutive proper...

Navigating the Requirements Jungle

NASA Astrophysics Data System (ADS)

Langer, Boris; Tautschnig, Michael

Research on validation and verification of requirements specifications has thus far focused on functional properties. Yet, in embedded systems, functional requirements constitute only a small fraction of the properties that must hold to guarantee proper and safe operation of the system under design.

15 CFR 1.2 - Description and design.

Code of Federal Regulations, 2010 CFR

2010-01-01

... fesse azure and or, a ship in full sail on waves of the sea, in chief proper; and in base a lighthouse... issued with the President's approval of the seal, made necessary by changes in the functions of the...

Roller Compacted Concrete over Soil Cement under Accelerated Loading : Research Project Capsule

DOT National Transportation Integrated Search

2012-09-01

Roller compacted concrete (RCC) is a stiff , zero-slump concrete mixture placed with modifi ed : asphalt paving equipment and compacted by vibratory rollers. Properly designed RCC mixes : can achieve outstanding compressive strengths similar to those...

Infrastructure support for the UCF driving simulator

DOT National Transportation Integrated Search

2002-01-01

Last year, a proposal was funded to maintain the infrastructure of the UCF Driving Simulator Lab. It was designed to guarantee the long-term presence of support staff with proper expertise to maintain the operational effectiveness of the driving simu...

Evaluation of joint sealant materials : interim report No. 1.

DOT National Transportation Integrated Search

1972-03-01

This report illustrates some of the problems caused by ineffectively sealed joints and points to the great need for properly sealing joints in both concrete pavements and structures. : The principles of design including slab lengths, joint dimensions...

Workshop on Microwave Power Transmission and Reception. Workshop Paper Summaries

NASA Technical Reports Server (NTRS)

1980-01-01

Microwave systems performance and phase control are discussed. Component design and reliability are highlighted. The power amplifiers, radiating elements, rectennas, and solid state configurations are described. The proper sizing of microwave transmission systems is also discussed.

Analyzing self-controlled case series data when case confirmation rates are estimated from an internal validation sample.

PubMed

Xu, Stanley; Clarke, Christina L; Newcomer, Sophia R; Daley, Matthew F; Glanz, Jason M

2018-05-16

Vaccine safety studies are often electronic health record (EHR)-based observational studies. These studies often face significant methodological challenges, including confounding and misclassification of adverse event. Vaccine safety researchers use self-controlled case series (SCCS) study design to handle confounding effect and employ medical chart review to ascertain cases that are identified using EHR data. However, for common adverse events, limited resources often make it impossible to adjudicate all adverse events observed in electronic data. In this paper, we considered four approaches for analyzing SCCS data with confirmation rates estimated from an internal validation sample: (1) observed cases, (2) confirmed cases only, (3) known confirmation rate, and (4) multiple imputation (MI). We conducted a simulation study to evaluate these four approaches using type I error rates, percent bias, and empirical power. Our simulation results suggest that when misclassification of adverse events is present, approaches such as observed cases, confirmed case only, and known confirmation rate may inflate the type I error, yield biased point estimates, and affect statistical power. The multiple imputation approach considers the uncertainty of estimated confirmation rates from an internal validation sample, yields a proper type I error rate, largely unbiased point estimate, proper variance estimate, and statistical power. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Using a voice to put a name to a face: the psycholinguistics of proper name comprehension.

PubMed

Barr, Dale J; Jackson, Laura; Phillips, Isobel

2014-02-01

We propose that hearing a proper name (e.g., Kevin) in a particular voice serves as a compound memory cue that directly activates representations of a mutually known target person, often permitting reference resolution without any complex computation of shared knowledge. In a referential communication study, pairs of friends played a communication game, in which we monitored the eyes of one friend (the addressee) while he or she sought to identify the target person, in a set of four photos, on the basis of a name spoken aloud. When the name was spoken by a friend, addressees rapidly identified the target person, and this facilitation was independent of whether the friend was articulating a message he or she had designed versus one from a third party with whom the target person was not shared. Our findings suggest that the comprehension system takes advantage of regularities in the environment to minimize effortful computation about who knows what.

Compressive Properties of Metal Matrix Syntactic Foams in Free and Constrained Compression

NASA Astrophysics Data System (ADS)

Orbulov, Imre Norbert; Májlinger, Kornél

2014-06-01

Metal matrix syntactic foam (MMSF) blocks were produced by an inert gas-assisted pressure infiltration technique. MMSFs are advanced hollow sphere reinforced-composite materials having promising application in the fields of aviation, transport, and automotive engineering, as well as in civil engineering. The produced blocks were investigated in free and constrained compression modes, and besides the characteristic mechanical properties, their deformation mechanisms and failure modes were studied. In the tests, the chemical composition of the matrix material, the size of the reinforcing ceramic hollow spheres, the applied heat treatment, and the compression mode were considered as investigation parameters. The monitored mechanical properties were the compressive strength, the fracture strain, the structural stiffness, the fracture energy, and the overall absorbed energy. These characteristics were strongly influenced by the test parameters. By the proper selection of the matrix and the reinforcement and by proper design, the mechanical properties of the MMSFs can be effectively tailored for specific and given applications.

Exploring the Internal Dynamics of Globular Clusters

NASA Astrophysics Data System (ADS)

Watkins, Laura L.; van der Marel, Roeland; Bellini, Andrea; Luetzgendorf, Nora; HSTPROMO Collaboration

2018-01-01

Exploring the Internal Dynamics of Globular ClustersThe formation histories and structural properties of globular clusters are imprinted on their internal dynamics. Energy equipartition results in velocity differences for stars of different mass, and leads to mass segregation, which results in different spatial distributions for stars of different mass. Intermediate-mass black holes significantly increase the velocity dispersions at the centres of clusters. By combining accurate measurements of their internal kinematics with state-of-the-art dynamical models, we can characterise both the velocity dispersion and mass profiles of clusters, tease apart the different effects, and understand how clusters may have formed and evolved.Using proper motions from the Hubble Space Telescope Proper Motion (HSTPROMO) Collaboration for a set of 22 Milky Way globular clusters, and our discrete dynamical modelling techniques designed to work with large, high-quality datasets, we are studying a variety of internal cluster properties. We will present the results of theoretical work on simulated clusters that demonstrates the efficacy of our approach, and preliminary results from application to real clusters.

Environmental Impact Statement. Space Nuclear Thermal Propulsion Program. Particle Bed reactor Propulsion Technology Development and Validation

DTIC Science & Technology

1993-05-01

further examination or disposal. 2.2.2.3 Non -Nucleer Engine Integration Tests. EITs would be designed to demonstrate proper function of the propellant...located 42 miles southwest of the CTF, is designated as a Class I air quality region. The nearest non -attainment area is Pocatello, Idaho, 75 miles south of...accelerate. combustiomn. Nintrogen and helnee are Staple CEnergy suggestsa design eail ofAt a em-le 500 aenIIirons 1 aoph,,,,ants ad non -reastive. ?annual

Handbook of the Statistics of Various Terrain and Water (Ice) Backgrounds from Selected U.S. Locations

DTIC Science & Technology

1980-01-01

designers and users of iufrared systems. This handbook contains a summary of the backgrounds analyzed to date as part of this effort. Most of the...last region, 8.0-14.0 pm, was covered with various filters at different AX’s, designated in the Index merely as 8.0-14.0 vim, but specifically...delineated in the Handbook within their properly designated bands. ] Since, as was mentioned earlier, the substance of this Handbook was presented in