49 CFR 190.331 - Petitions for rulemaking.

Code of Federal Regulations, 2014 CFR

2014-10-01

... petitioner represents; and (4) Provide information and arguments that support the proposed action, including relevant technical, scientific or other data as available to the petitioner, and any specific known cases...

49 CFR 190.331 - Petitions for rulemaking.

Code of Federal Regulations, 2011 CFR

2011-10-01

... represents; and (4) Provide information and arguments that support the proposed action, including relevant technical, scientific or other data as available to the petitioner, and any specific known cases that...

49 CFR 190.331 - Petitions for rulemaking.

Code of Federal Regulations, 2012 CFR

2012-10-01

... represents; and (4) Provide information and arguments that support the proposed action, including relevant technical, scientific or other data as available to the petitioner, and any specific known cases that...

The Valuation of Scientific and Technical Experiments

NASA Technical Reports Server (NTRS)

Williams, F. E.

1972-01-01

Rational selection of scientific and technical experiments for space missions is studied. Particular emphasis is placed on the assessment of value or worth of an experiment. A specification procedure is outlined and discussed for the case of one decision maker. Experiments are viewed as multi-attributed entities, and a relevant set of attributes is proposed. Alternative methods of describing levels of the attributes are proposed and discussed. The reasonableness of certain simplifying assumptions such as preferential and utility independence is explored, and it is tentatively concluded that preferential independence applies and utility independence appears to be appropriate.

Advanced Small Modular Reactor (SMR) Probabilistic Risk Assessment (PRA) Technical Exchange Meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis

2013-09-01

During FY13, the INL developed an advanced SMR PRA framework which has been described in the report Small Modular Reactor (SMR) Probabilistic Risk Assessment (PRA) Detailed Technical Framework Specification, INL/EXT-13-28974 (April 2013). In this framework, the various areas are considered: Probabilistic models to provide information specific to advanced SMRs Representation of specific SMR design issues such as having co-located modules and passive safety features Use of modern open-source and readily available analysis methods Internal and external events resulting in impacts to safety All-hazards considerations Methods to support the identification of design vulnerabilities Mechanistic and probabilistic data needs to support modelingmore » and tools In order to describe this framework more fully and obtain feedback on the proposed approaches, the INL hosted a technical exchange meeting during August 2013. This report describes the outcomes of that meeting.« less

Devising a consensus definition and framework for non-technical skills in healthcare to support educational design: A modified Delphi study.

PubMed

Gordon, Morris; Baker, Paul; Catchpole, Ken; Darbyshire, Daniel; Schocken, Dawn

2015-01-01

Non-technical skills are a subset of human factors that focus on the individual and promote safety through teamwork and awareness. There is no widely adopted competency- or outcome-based framework for non-technical skills training in healthcare. The authors set out to devise such a framework using a modified Delphi approach. An exhaustive list of published and team suggested items was presented to the expert panel for ranking and to propose a definition. In the second round, a focused list was presented, as well as the proposed definition elements. The finalised framework was sent to the panel for review. Sixteen experts participated. The final framework consists of 16 competencies for all and eight specific competencies for team leaders. The consensus definition describes non-technical skills as "a set of social (communication and team work) and cognitive (analytical and personal behaviour) skills that support high quality, safe, effective and efficient inter-professional care within the complex healthcare system". The authors have produced a new competency framework, through the works of an International expert panel, which is not discipline specific that can be used by curriculum developers, educational innovators and clinical teachers to support developments in the field.

77 FR 69507 - Proposed Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-19

..., ``Revise Shutdown Margin Definition To Address Advanced Fuel Designs'' AGENCY: Nuclear Regulatory... Shutdown Margin Definition to Address Advanced Fuel Designs.'' DATES: Comment period expires on December 19... address newer BWR fuel designs, which may be more reactive at shutdown temperatures above 68[emsp14][deg]F...

76 FR 25787 - Medicare Program; Proposed Changes to the Hospital Inpatient Prospective Payment Systems for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-05

... A. Hospital Inpatient Quality Reporting Program 1. Background a. Overview b. Statutory History and History of Measures Adopted for the Hospital IQR Program c. Maintenance of Technical Specifications for...

Small Business Innovation Research. Program solicitation. Closing date: July 22, 1988

NASA Technical Reports Server (NTRS)

1988-01-01

The sixth annual Small Business Innovation Research (SBIR) solicitation by NASA, describes the program, identifies eligibility requirements, outlines proposal preparation and submission requirements, describes the proposal evaluation and award selection process, and provides other information to assist those interested in participating in the SBIR program. It also identifies in Section 8.0 and Appendix D, the specific technical topics and subtopics in which SBIR Phase 1 proposals are solicited in 1988.

Acquisition of Expert/Non-Expert Vocabulary from Reformulations.

PubMed

Antoine, Edwige; Grabar, Natalia

2017-01-01

Technical medical terms are complicated to be correctly understood by non-experts. Vocabulary, associating technical terms with layman expressions, can help in increasing the readability of technical texts and their understanding. The purpose of our work is to build this kind of vocabulary. We propose to exploit the notion of reformulation following two methods: extraction of abbreviations and of reformulations with specific markers. The segments associated thanks to these methods are aligned with medical terminologies. Our results allow to cover over 9,000 medical terms and show precision of extractions between 0.24 and 0.98. The results and analyzed and compared with the existing work.

48 CFR 52.214-23 - Late submissions, modifications, revisions, and withdrawals of technical proposals under two-step...

Code of Federal Regulations, 2010 CFR

2010-10-01

... resume. (e) Technical proposals may be withdrawn by written notice received at any time before the exact..., modifications, revisions, and withdrawals of technical proposals under two-step sealed bidding. 52.214-23... Late submissions, modifications, revisions, and withdrawals of technical proposals under two-step...

Evaluation Framework for NASA's Educational Outreach Programs

NASA Technical Reports Server (NTRS)

Berg, Rick; Booker, Angela; Linde, Charlotte; Preston, Connie

1999-01-01

The objective of the proposed work is to develop an evaluation framework for NASA's educational outreach efforts. We focus on public (rather than technical or scientific) dissemination efforts, specifically on Internet-based outreach sites for children.The outcome of this work is to propose both methods and criteria for evaluation, which would enable NASA to do a more analytic evaluation of its outreach efforts. The proposed framework is based on IRL's ethnographic and video-based observational methods, which allow us to analyze how these sites are actually used.

Cape Blanco wind farm feasibility study

NASA Astrophysics Data System (ADS)

1987-11-01

The Cape Blanco Wind Farm (CBWF) Feasibility Study was undertaken as a prototype for determining the feasibility of proposals for wind energy projects at Northwest sites. It was intended to test for conditions under which wind generation of electricity could be commercially feasible, not by another abstract survey of alternative technologies, but rather through a site-specific, machine-specific analysis of one proposal. Some of the study findings would be most pertinent to the Cape Blanco site - local problems require local solutions. Other findings would be readily applicable to other sites and other machines, and study methodologies would be designed to be modified for appraisal of other proposals. This volume discusses environmental, economic, and technical issues of the Wind Farm.

77 FR 13831 - Health Information Technology: Standards, Implementation Specifications, and Certification...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-07

...Under section 3004 of the Public Health Service Act, the Secretary of Health and Human Services is proposing to revise the initial set of standards, implementation specifications, and certification criteria adopted in an interim final rule published on January 13, 2010, and a subsequent final rule that was published on July 28, 2010, as well as to adopt new standards, implementation specifications, and certification criteria. The proposed new and revised certification criteria would establish the technical capabilities and specify the related standards and implementation specifications that Certified Electronic Health Record (EHR) Technology would need to include to, at a minimum, support the achievement of meaningful use by eligible professionals, eligible hospitals, and critical access hospitals under the Medicare and Medicaid EHR Incentive Programs beginning with the EHR reporting periods in fiscal year and calendar year 2014. This notice of proposed rulemaking also proposes revisions to the permanent certification program for health information technology, which includes changing the program's name.

Far-Infrared Heterodyne Spectrometer for Sofia

NASA Technical Reports Server (NTRS)

Betz, A. L.

1998-01-01

The project goal was to evaluate the scientific capabilities and technical requirements for a far-infrared heterodyne spectrometer suitable for the SOFIA Airborne Observatory, which is now being developed by NASA under contract to the Universities Space Research Association (USRA). The conclusions detailed below include our specific recommendations for astronomical observations, as well as our intended technical approach for reaching these scientific goals. These conclusions were presented to USRA in the form of a proposal to build this instrument. USRA subsequently awarded the University of Colorado a 3-year grant to develop the proposed Hot-Electron micro-Bolometer (HEB) mixer concept for high frequencies above 3 THz, as well as other semiconductor mixer technologies suitable for high sensitivity receivers in the 2-6 THz frequency band.

Designing Needs Statements in a Systematic Iterative Way

ERIC Educational Resources Information Center

Verstegen, D. M. L.; Barnard, Y. F.; Pilot, A.

2009-01-01

Designing specifications for technically advanced instructional products, such as e-learning, simulations or simulators requires different kinds of expertise. The SLIM method proposes to involve all stakeholders from the beginning in a series of workshops under the guidance of experienced instructional designers. These instructional designers…

48 CFR 2052.216-72 - Task order procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

...; (5) Technical skills required; and (6) Estimated level of effort. (b) Task order technical proposal. By the date specified in the TORFP, the contractor shall deliver to the contracting officer a written or verbal (as specified in the TORFP technical proposal submittal instructions) technical proposal...

TU-G-201-02: An MRI Simulator From Proposal to Operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cao, Y.

2015-06-15

This session will update therapeutic physicists on technological advancements and radiation oncology features of commercial CT, MRI, and PET/CT imaging systems. Also described are physicists’ roles in every stage of equipment selection, purchasing, and operation, including defining specifications, evaluating vendors, making recommendations, and optimal and safe use of imaging equipment in radiation oncology environment. The first presentation defines important terminology of CT and PET/CT followed by a review of latest innovations, such as metal artifact reduction, statistical iterative reconstruction, radiation dose management, tissue classification by dual energy CT and spectral CT, improvement in spatial resolution and sensitivity in PET, andmore » potentials of PET/MR. We will also discuss important technical specifications and items in CT and PET/CT purchasing quotes and their impacts. The second presentation will focus on key components in the request for proposal for a MRI simulator and how to evaluate vendor proposals. MRI safety issues in radiation Oncology, including MRI scanner Zones (4-zone design), will be discussed. Basic MR terminologies, important functionalities, and advanced features, which are relevant to radiation therapy, will be discussed. In the third presentation, justification of imaging systems for radiation oncology, considerations in room design and construction in a RO department, shared use with diagnostic radiology, staffing needs and training, clinical/research use cases and implementation, will be discussed. The emphasis will be on understanding and bridging the differences between diagnostic and radiation oncology installations, building consensus amongst stakeholders for purchase and use, and integrating imaging technologies into the radiation oncology environment. Learning Objectives: Learn the latest innovations of major imaging systems relevant to radiation therapy Be able to describe important technical specifications of CT, MRI, and PET/CT Understand the process of budget request, equipment justification, comparisons of technical specifications, site visits, vendor selection, and contract development.« less

Supervised normalization of microarrays

PubMed Central

Mecham, Brigham H.; Nelson, Peter S.; Storey, John D.

2010-01-01

Motivation: A major challenge in utilizing microarray technologies to measure nucleic acid abundances is ‘normalization’, the goal of which is to separate biologically meaningful signal from other confounding sources of signal, often due to unavoidable technical factors. It is intuitively clear that true biological signal and confounding factors need to be simultaneously considered when performing normalization. However, the most popular normalization approaches do not utilize what is known about the study, both in terms of the biological variables of interest and the known technical factors in the study, such as batch or array processing date. Results: We show here that failing to include all study-specific biological and technical variables when performing normalization leads to biased downstream analyses. We propose a general normalization framework that fits a study-specific model employing every known variable that is relevant to the expression study. The proposed method is generally applicable to the full range of existing probe designs, as well as to both single-channel and dual-channel arrays. We show through real and simulated examples that the method has favorable operating characteristics in comparison to some of the most highly used normalization methods. Availability: An R package called snm implementing the methodology will be made available from Bioconductor (http://bioconductor.org). Contact: jstorey@princeton.edu Supplementary information: Supplementary data are available at Bioinformatics online. PMID:20363728

7 CFR 1486.404 - What expenditures are not eligible for program funding?

Code of Federal Regulations, 2011 CFR

2011-01-01

... funding? (a) CCC will not reimburse expenditures made prior to approval of a Recipient's proposal... individual students who are directly assigned to specific project activities appropriate to their backgrounds...; (10) Costs of product research or new product development; (11) Costs of developing technical...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kogan, B.E.; Kuzmina, E.Ya.

The high content of naphthalene in the wash oil fraction as compared to the specifications of the technical standards for wash oil is discussed. The introduction of additional heat to the rectification column, redistillation of the naphthalene fraction and injection of live steam are proposed as effective measures to decrease the naphthalene content. (JMT)

48 CFR 2415.305 - Proposal evaluation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technical portion of each proposal to the TEP Chairperson or his or her designee. The cost/price portion of each proposal shall be retained by the Contracting Officer pending initial technical evaluation by the TEP. (3) Technical evaluation. The TEP shall rate each proposal based on the evaluation factors...

Scientific profile and professional responsibility of Court-appointed Medical Technical Consultants in Italy: time for a specific educational curriculum?

PubMed

Conti, Andrea Alberto

2014-08-20

Court-appointed Technical Consultants (CTCs) are fundamental figures in the Italian judicial system. CTCs are experts appointed by judges in order to supplement their activities by ascertaining, collecting and analyzing facts concerning the specific subject of a lawsuit. These experts formulate opinions, gather motivations and perform checks to provide clear, objective and irrefutable answers to the questions posed by judges. With direct reference to the medical field, while police doctors (specialists in forensic medicine) follow an academic, dedicated, well-structured educational curriculum, the University specialty school in Forensic Medicine, other medical CTCs, though not infrequently luminaries with one or many medical specialties and professional acknowledgments, may have no specific legal-medicine and juridical expertise, precisely because a similar expertise is not formally required of them. In the light of these considerations, in Italy some professionals of the legal world, and of the health context too, have proposed for medical CTCs targeted educational pathways, which would provide these experts with formal specific qualifications. In synthesis and in conclusion, a full knowledge and a rigorous respect of the rules of legal proceedings emerge as increasingly important characteristics for current and future Court-appointed Technical Consultants, together with a specific educational curriculum.

77 FR 27869 - Medicare Program; Hospital Inpatient Prospective Payment Systems for Acute Care Hospitals and the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-11

... Considered HAC Candidate: Iatrogenic Pneumothorax With Venous Catheterization 3. Present on Admission (POA.... History of Measures Adopted for the Hospital IQR Program b. Maintenance of Technical Specifications for...-Associated Infection (HAI) Measures (A) Proposed Central Line Associated Blood Stream Infections ((CLABSI...

47 CFR 301.5 - Manufacturers' technical approval process.

Code of Federal Regulations, 2010 CFR

2010-10-01

... intent to NTIA at least three months prior to submitting test results and sample models of converter... shall treat the notices of intent received as business confidential and proprietary information and will.... (d) Each model proposed to be a CECB shall meet the performance specification and features set forth...

75 FR 4111 - Biweekly Notice; Applications and Amendments to Facility Operating Licenses Involving No...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-26

... addition, the requestor/petitioner shall provide a brief explanation of the bases for the contention and a..., malfunctions, or accident initiators not considered in the design and licensing bases. The proposed amendment... technical specifications (TSs) requirements related to primary containment isolation instrumentation in...

75 FR 36067 - Agency Information Collection Activities; Proposed Collection; Comment Request; Chemical-Specific...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-24

... section 8(a) to evaluate the potential for adverse human health and environmental effects caused by the... Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200... technical information contact: Karen Chu, Chemical Control Division (7405M), Office of Pollution Prevention...

Status Of the ILC Main Linac Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saini, Arun; Kapin, Valery; Solyak, Nikolay

2017-05-01

International Linear collider (ILC) is a proposed accelerator facility which is primarily based on two 11-km long superconducting main linacs. In this paper we present recent updates on the main linac design and discuss changes made in order to meet specification outlined in the technical design report (TDR).

48 CFR 815.404-1 - Proposal analysis techniques.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technical reviews. (See 801.602-70.) (b) Contracting officers determine the level of technical analyses... under them, and contract modifications. Contracting officers must request technical analyses of the proposals from the appropriate technical personnel. The technical analyses must address, as a minimum, the...

48 CFR 815.404-1 - Proposal analysis techniques.

Code of Federal Regulations, 2011 CFR

2011-10-01

... technical reviews. (See 801.602-70.) (b) Contracting officers determine the level of technical analyses... under them, and contract modifications. Contracting officers must request technical analyses of the proposals from the appropriate technical personnel. The technical analyses must address, as a minimum, the...

48 CFR 3419.870 - Acquisition of technical requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... competition to submit written technical proposals. Otherwise, ED holds oral discussions with the participating... participating in a limited technical competition based on the written technical proposals or oral discussions... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Acquisition of technical...

48 CFR 315.307 - Proposal revisions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... appropriate; and (2) An evaluation of technical factors by the technical evaluation panel, as necessary. The technical evaluation panel may rescore and re-rank technical proposals in the competitive range and prepare a technical evaluation report. To the extent practicable, the same evaluators who reviewed the...

48 CFR 2052.215-75 - Proposal presentation and format.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., i.e., competitive vs. noncompetitive, and the cost evaluation. (c) “Written Technical and Management... * copies. (1) The written Technical and Management Proposal or Oral Presentation and Supporting... objectives of this procurement. (3) The written Technical Proposal or Oral Presentation and Supporting...

32 CFR 555.7 - Submission of technical proposals.

Code of Federal Regulations, 2010 CFR

2010-07-01

... research and development laboratories are authorized to submit technical proposals directly to other... 32 National Defense 3 2010-07-01 2010-07-01 true Submission of technical proposals. 555.7 Section... AND NATIONAL CEMETERIES CORPS OF ENGINEERS, RESEARCH AND DEVELOPMENT, LABORATORY RESEARCH AND...

The 50-horsepower solar-powered irrigation facility located near Gila Bend, Arizona

NASA Astrophysics Data System (ADS)

Smith, W. A.; Alexander, G.; Busch, D. F.

1980-05-01

The 50 horsepower solar powered irrigation facility near Gila Bend, Arizona which includes a Rankine cycle demonstrates the technical feasibility of solar powered pumping. The design of a facility specifically for the irrigation farmer using the technology that has been developed over the last four years is proposed.

Demographic Accounting and Model-Building. Education and Development Technical Reports.

ERIC Educational Resources Information Center

Stone, Richard

This report describes and develops a model for coordinating a variety of demographic and social statistics within a single framework. The framework proposed, together with its associated methods of analysis, serves both general and specific functions. The general aim of these functions is to give numerical definition to the pattern of society and…

78 FR 38078 - Biweekly Notice; Applications and Amendments to Facility Operating Licenses and Combined Licenses...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-25

... SFP Purification Loop and recirculation and purification of the RWST water using the BARS is not... revise the minimum volume and low level setpoint on the Refueling Water Storage Tank. Because the... proposed change would revise Technical Specification 3.5.4, ``Refueling Water Storage Tank (RWST)'' such...

The 50-horsepower solar-powered irrigation facility located near Gila Bend, Arizona

NASA Technical Reports Server (NTRS)

Smith, W. A.; Alexander, G.; Busch, D. F.

1980-01-01

The 50 horsepower solar powered irrigation facility near Gila Bend, Arizona which includes a Rankine cycle demonstrates the technical feasibility of solar powered pumping. The design of a facility specifically for the irrigation farmer using the technology that has been developed over the last four years is proposed.

75 FR 33366 - Exelon Generation Company, LLC; Oyster Creek Nuclear Generating Station; Notice of Withdrawal of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-11

...; Oyster Creek Nuclear Generating Station; Notice of Withdrawal of Application for Amendment to Facility... Operating License No. DPR-16 for the Oyster Creek Nuclear Generating Station (Oyster Creek), located in Ocean County, New Jersey. The proposed amendment would have revised the Technical Specifications to...

75 FR 60494 - Notice of Proposed Guidance and Request for Comment on the Federal Transit Administration's...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-30

... on the Federal Transit Administration's research, technical assistance, and training programs and seeks comment thereon. Proposed FTA Circular 6100.1D, ``Research, Technical Assistance, and Training... Proposed Guidance and Request for Comment on the Federal Transit Administration's Research, Technical...

A computer-based specification methodology

NASA Technical Reports Server (NTRS)

Munck, Robert G.

1986-01-01

Standard practices for creating and using system specifications are inadequate for large, advanced-technology systems. A need exists to break away from paper documents in favor of documents that are stored in computers and which are read and otherwise used with the help of computers. An SADT-based system, running on the proposed Space Station data management network, could be a powerful tool for doing much of the required technical work of the Station, including creating and operating the network itself.

77 FR 9216 - Native American Career and Technical Education Program; Proposed Waivers and Extension of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-16

... DEPARTMENT OF EDUCATION Native American Career and Technical Education Program; Proposed Waivers... Education, Department of Education. ACTION: Notice. SUMMARY: For 60-month projects funded in fiscal year (FY) 2007 under the Native American Career and Technical Education Program (NACTEP), the Secretary proposes...

TU-G-201-00: Imaging Equipment Specification and Selection in Radiation Oncology Departments

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This session will update therapeutic physicists on technological advancements and radiation oncology features of commercial CT, MRI, and PET/CT imaging systems. Also described are physicists’ roles in every stage of equipment selection, purchasing, and operation, including defining specifications, evaluating vendors, making recommendations, and optimal and safe use of imaging equipment in radiation oncology environment. The first presentation defines important terminology of CT and PET/CT followed by a review of latest innovations, such as metal artifact reduction, statistical iterative reconstruction, radiation dose management, tissue classification by dual energy CT and spectral CT, improvement in spatial resolution and sensitivity in PET, andmore » potentials of PET/MR. We will also discuss important technical specifications and items in CT and PET/CT purchasing quotes and their impacts. The second presentation will focus on key components in the request for proposal for a MRI simulator and how to evaluate vendor proposals. MRI safety issues in radiation Oncology, including MRI scanner Zones (4-zone design), will be discussed. Basic MR terminologies, important functionalities, and advanced features, which are relevant to radiation therapy, will be discussed. In the third presentation, justification of imaging systems for radiation oncology, considerations in room design and construction in a RO department, shared use with diagnostic radiology, staffing needs and training, clinical/research use cases and implementation, will be discussed. The emphasis will be on understanding and bridging the differences between diagnostic and radiation oncology installations, building consensus amongst stakeholders for purchase and use, and integrating imaging technologies into the radiation oncology environment. Learning Objectives: Learn the latest innovations of major imaging systems relevant to radiation therapy Be able to describe important technical specifications of CT, MRI, and PET/CT Understand the process of budget request, equipment justification, comparisons of technical specifications, site visits, vendor selection, and contract development.« less

75 FR 69002 - Revisions to the California State Implementation Plan, Imperial County Air Pollution Control...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-10

...: Our proposed action (75 FR 27976) and the associated TSD (pages 2-3) both refer to two ICAPCD analyses... specifically references page 15 of Environ's ``Draft Final Technical Memorandum Regulation VIII BACM Analysis... reference CARB's inventory analysis to support the 50% reduction assumption. \\1\\ Printed in error as III-2...

76 FR 11417 - Public Workshop and Hearing for Rear Visibility; Federal Motor Vehicle Safety Standard, Rearview...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

...), Department of Transportation (DOT). ACTION: Notice of proposed rulemaking: Announcement of a public technical... this proposal. The first event, a public technical workshop, will be held on March 11, 2011, to discuss technical issues relevant to the test procedure described in the proposed rule. The second event, a public...

75 FR 27273 - Hazardous Materials; Packages Intended for Transport by Aircraft

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

...PHMSA proposes to amend requirements in the Hazardous Materials Regulations to enhance the integrity of inner packagings or receptacles of combination packagings containing liquid hazardous material by ensuring they remain intact when subjected to the reduced pressure and other forces encountered in air transportation. In order to substantially decrease the likelihood of a hazardous materials release, the proposed amendments: prescribe specific test protocols and standards for determining whether an inner packaging or receptacle is capable of meeting the pressure differential requirements specified in the regulations and, consistent with the 2011-2012 edition of the International Civil Aviation Organization Technical Instructions for the Safe Transport of Dangerous Goods by Aircraft (ICAO Technical Instructions), require the closures on all inner packagings containing liquids within a combination packaging to be secured by a secondary means or, under certain circumstances, permit the use of a liner.

Far-Infrared Heterodyne Spectrometer for SOFIA

NASA Technical Reports Server (NTRS)

Betz, A. L.; Boreiko, R. T.

1998-01-01

This report summarizes work done under NASA Grant NAG2-1062 awarded to the University of Colorado. The project goal was to evaluate the scientific capabilities and technical requirements for a far-infrared heterodyne spectrometer suitable for the SOFIA Airborne Observatory, which is now being developed by NASA under contract to the Universities Space Research Association (USRA). The conclusions detailed below include our specific recommendations for astronomical observations, as well as our intended technical approach for reaching these scientific goals. These conclusions were presented to USRA in the form of a proposal to build this instrument. USRA subsequently awarded the University of Colorado a 3-year grant (USRA 8500-98-010) to develop the proposed Hot-Electron micro-Bolometer (HEB) mixer concept for high frequencies above 3 THz, as well as other semiconductor mixer technologies suitable for high sensitivity receivers in the 2-6 THz frequency band.

32 CFR 203.10 - Eligible activities.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) MISCELLANEOUS TECHNICAL ASSISTANCE FOR PUBLIC PARTICIPATION (TAPP) IN DEFENSE ENVIRONMENTAL RESTORATION... at the facility do not have the necessary technical expertise for the proposed project, or the proposed technical assistance will contribute to the efficiency, effectiveness, or timeliness of...

77 FR 27490 - Plant-Specific Adoption, Revision 4 of the Improved Standard Technical Specifications

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-10

...,'' NUREG-1432, ``Standard Technical Specifications, Combustion Engineering Plants,'' NUREG-1433, ``Standard..., ``Standard Technical Specifications, Combustion Engineering Plants'' Revision 4, ADAMS Accession No..., Westinghouse Plants''.. NUREG-1432, ``Standard Technical ML12102A165 ML12102A169 Specifications, Combustion...

Deep Brain Stimulation for Essential Vocal Tremor: A Technical Report.

PubMed

Ho, Allen L; Choudhri, Omar; Sung, C Kwang; DiRenzo, Elizabeth E; Halpern, Casey H

2015-03-01

Essential vocal tremor (EVT) is the presence of a tremulous voice that is commonly associated with essential tremor. Patients with EVT often report a necessary increase in vocal effort that significantly worsens with stress and anxiety and can significantly impact quality of life despite optimal medical and behavioral treatment options. Deep brain stimulation (DBS) has been proposed as an effective therapy for vocal tremor, but very few studies exist in the literature that comprehensively evaluate the efficacy of DBS for specifically addressing EVT. We present a technical report on our multidisciplinary, comprehensive operative methodology for treatment of EVT with frameless, awake deep brain stimulation (DBS).

Deep Brain Stimulation for Essential Vocal Tremor: A Technical Report

PubMed Central

Choudhri, Omar; Sung, C. Kwang; DiRenzo, Elizabeth E; Halpern, Casey H

2015-01-01

Essential vocal tremor (EVT) is the presence of a tremulous voice that is commonly associated with essential tremor. Patients with EVT often report a necessary increase in vocal effort that significantly worsens with stress and anxiety and can significantly impact quality of life despite optimal medical and behavioral treatment options. Deep brain stimulation (DBS) has been proposed as an effective therapy for vocal tremor, but very few studies exist in the literature that comprehensively evaluate the efficacy of DBS for specifically addressing EVT. We present a technical report on our multidisciplinary, comprehensive operative methodology for treatment of EVT with frameless, awake deep brain stimulation (DBS). PMID:26180680

Fluidized-Solid-Fuel Injection Process

NASA Technical Reports Server (NTRS)

Taylor, William

1992-01-01

Report proposes development of rocket engines burning small grains of solid fuel entrained in gas streams. Main technical discussion in report divided into three parts: established fluidization technology; variety of rockets and rocket engines used by nations around the world; and rocket-engine equation. Discusses significance of specific impulse and ratio between initial and final masses of rocket. Concludes by stating three important reasons to proceed with new development: proposed engines safer; fluidized-solid-fuel injection process increases variety of solid-fuel formulations used; and development of fluidized-solid-fuel injection process provides base of engineering knowledge.

77 FR 8288 - Applications and Amendments to Facility Operating Licenses Involving Proposed No Significant...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-14

... not listed on the Web site, but should note that the NRC's E-Filing system does not support unlisted... (COLR), to update the methodology reference list to support the core design with the new AREVA fuel... methodologies listed in Technical Specification 5.7.1.5 has no impact on any plant configuration or system...

Cognitive Apprenticeship: Teaching the Craft of Reading, Writing, and Mathematics. Technical Report No. 403.

ERIC Educational Resources Information Center

Collins, Allan; And Others

Noting that skills and knowledge taught in schools have become abstracted from their uses in the world, this paper clarifies some of the implications for the nature of the knowledge that students acquire through a proposal for the retooling of apprenticeship methods for the teaching and learning of cognitive skills. The paper specifically proposes…

A Management Model for International Participation in Space Exploration Missions

NASA Technical Reports Server (NTRS)

George, Patrick J.; Pease, Gary M.; Tyburski, Timothy E.

2005-01-01

This paper proposes an engineering management model for NASA's future space exploration missions based on past experiences working with the International Partners of the International Space Station. The authors have over 25 years of combined experience working with the European Space Agency, Japan Aerospace Exploration Agency, Canadian Space Agency, Italian Space Agency, Russian Space Agency, and their respective contractors in the design, manufacturing, verification, and integration of their elements electric power system into the United States on-orbit segment. The perspective presented is one from a specific sub-system integration role and is offered so that the lessons learned from solving issues of technical and cultural nature may be taken into account during the formulation of international partnerships. Descriptions of the types of unique problems encountered relative to interactions between international partnerships are reviewed. Solutions to the problems are offered, taking into consideration the technical implications. Through the process of investigating each solution, the important and significant issues associated with working with international engineers and managers are outlined. Potential solutions are then characterized by proposing a set of specific methodologies to jointly develop spacecraft configurations that benefits all international participants, maximizes mission success and vehicle interoperability while minimizing cost.

Government Projects and Teaching the Technical Proposal.

ERIC Educational Resources Information Center

Butler, Douglas R.

1987-01-01

Describes a technical proposal writing assignment modeled after the conditions in industry. Provides a paradigm of government project proposals and then outlines the stages of the assignment that allow student to rework and revise, thereby discouraging students from writing formulaic and superficial proposals. (SRT)

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2013 CFR

2013-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2014 CFR

2014-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

Improved Emergency Egress Lighting System for the ISS

NASA Technical Reports Server (NTRS)

Eaton, Leslie L.; Barr, Don A.

2005-01-01

Emergency lights provide illumination in corridors, stairwells, ramps, escalators, aisles, and exit passageways during power failures. Safety and visibility are critical during a power outage. If emergency lights fail to operate properly, the building occupants can become disoriented. Four documents in a collection discuss different topics relating to a proposed improved emergency egress lighting system (EELS) for the International Space Station (ISS). While the present EELS is designed around rows of green-light-emitting diodes, the proposed system contains strips of electroluminescent tape using different colors for each egress path. The proposed EELS can be powered by the same battery currently used by the present EELS, but would require an inverter because electroluminescent devices require AC. Electroluminescent devices also require significantly less current and, depending on the color, would emit 3 to 8 times the light of the present EELS. In addition, they could operate for up to 75 hours (versus .20 minutes for the present system). The first document contains a one-page summary of the proposal and an evaluation of technical merit. The second document summarizes the motivation for, and the design of, the proposed EELS. The third document addresses relevant aspects of the measurement of spectral sensitivity and the psychophysics of perception of light. The fourth document presents additional background information and technical specifications for the electroluminescent tapes.

TU-G-201-01: What Therapy Physicists Need to Know About CT and PET/CT: Terminology and Latest Developments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hua, C.

This session will update therapeutic physicists on technological advancements and radiation oncology features of commercial CT, MRI, and PET/CT imaging systems. Also described are physicists’ roles in every stage of equipment selection, purchasing, and operation, including defining specifications, evaluating vendors, making recommendations, and optimal and safe use of imaging equipment in radiation oncology environment. The first presentation defines important terminology of CT and PET/CT followed by a review of latest innovations, such as metal artifact reduction, statistical iterative reconstruction, radiation dose management, tissue classification by dual energy CT and spectral CT, improvement in spatial resolution and sensitivity in PET, andmore » potentials of PET/MR. We will also discuss important technical specifications and items in CT and PET/CT purchasing quotes and their impacts. The second presentation will focus on key components in the request for proposal for a MRI simulator and how to evaluate vendor proposals. MRI safety issues in radiation Oncology, including MRI scanner Zones (4-zone design), will be discussed. Basic MR terminologies, important functionalities, and advanced features, which are relevant to radiation therapy, will be discussed. In the third presentation, justification of imaging systems for radiation oncology, considerations in room design and construction in a RO department, shared use with diagnostic radiology, staffing needs and training, clinical/research use cases and implementation, will be discussed. The emphasis will be on understanding and bridging the differences between diagnostic and radiation oncology installations, building consensus amongst stakeholders for purchase and use, and integrating imaging technologies into the radiation oncology environment. Learning Objectives: Learn the latest innovations of major imaging systems relevant to radiation therapy Be able to describe important technical specifications of CT, MRI, and PET/CT Understand the process of budget request, equipment justification, comparisons of technical specifications, site visits, vendor selection, and contract development.« less

78 FR 64146 - 30-Day Notice of Proposed Information Collection: Technical Processing Requirements for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... Information Collection: Technical Processing Requirements for Multifamily Project Mortgage Insurance AGENCY: Office of the Chief Information Officer, HUD. ACTION: Notice. SUMMARY: HUD has submitted the proposed... Information Collection Title of Information Collection: Technical Processing Requirements for Multifamily...

Non-Functional Property Driven Service Governance: Performance Implications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Yan; Zhu, Liming; Bass, Len

2007-09-17

Service governance is a set of businesses processes, policies and technical solutions that support enterprises in their implementation and management of their SOA. The decisions of service governance, especially concerning service boundaries at the enterprise level, influence the deployment topology of business services across or within business organizations. Deployment topologies are realized by integration technologies such as Enterprise Service Bus (ESB). Service governance and technical solutions interact in a subtle way including through communication patterns and protocols between services and ESBs, as well as the deployment and configuration of ESB. These factors have a strong influence on the Non- Functionalmore » Properties (NFP) of a SOA solution. A systematic approach is essential to understand alternative technical solutions for a specific service governance decision. This paper proposes a modeling approach to evaluate the performance-related NFP impacts when mapping service governance to technical solutions using an ESB. This approach is illustrated by the quantitative performance analysis of a real« less

Selection of organic process and source indicator substances for the anthropogenically influenced water cycle.

PubMed

Jekel, Martin; Dott, Wolfgang; Bergmann, Axel; Dünnbier, Uwe; Gnirß, Regina; Haist-Gulde, Brigitte; Hamscher, Gerd; Letzel, Marion; Licha, Tobias; Lyko, Sven; Miehe, Ulf; Sacher, Frank; Scheurer, Marco; Schmidt, Carsten K; Reemtsma, Thorsten; Ruhl, Aki Sebastian

2015-04-01

An increasing number of organic micropollutants (OMP) is detected in anthropogenically influenced water cycles. Source control and effective natural and technical barriers are essential to maintain a high quality of drinking water resources under these circumstances. Based on the literature and our own research this study proposes a limited number of OMP that can serve as indicator substances for the major sources of OMP, such as wastewater treatment plants, agriculture and surface runoff. Furthermore functional indicators are proposed that allow assessment of the proper function of natural and technical barriers in the aquatic environment, namely conventional municipal wastewater treatment, advanced treatment (ozonation, activated carbon), bank filtration and soil aquifer treatment as well as self-purification in surface water. These indicator substances include the artificial sweetener acesulfame, the anti-inflammatory drug ibuprofen, the anticonvulsant carbamazepine, the corrosion inhibitor benzotriazole and the herbicide mecoprop among others. The chemical indicator substances are intended to support comparisons between watersheds and technical and natural processes independent of specific water cycles and to reduce efforts and costs of chemical analyses without losing essential information. Copyright © 2014 Elsevier Ltd. All rights reserved.

75 FR 6683 - Notice of Proposed Information Collection: Comment Request; Technical Processing Requirements for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-10

... Information Collection: Comment Request; Technical Processing Requirements for Multifamily Project Mortgage... information: Title of Proposal: Technical Processing Requirements for Multifamily Project Mortgage Insurance... information collection requirement described below will be submitted to the Office of Management and Budget...

Composite Socio-Technical Systems: A Method for Social Energy Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yingchen; He, Fulin; Hao, Jun

In order to model and study the interactions between social on technical systems, a systemic method, namely the composite socio-technical systems (CSTS), is proposed to incorporate social systems, technical systems and the interaction mechanism between them. A case study on University of Denver (DU) campus grid is presented in paper to demonstrate the application of the proposed method. In the case study, the social system, technical system, and the interaction mechanism are defined and modelled within the framework of CSTS. Distributed and centralized control and management schemes are investigated, respectively, and numerical results verifies the feasibility and performance of themore » proposed composite system method.« less

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2014 CFR

2014-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2013 CFR

2013-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2010 CFR

2010-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2012 CFR

2012-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

Papers Presented at the ACM SIGCSE Technical Symposium on Academic Education in Computer Science [held in Houston, Texas, November 16, 1970].

ERIC Educational Resources Information Center

Aiken, Robert M., Ed.

1970-01-01

The papers given at this symposium were selected for their description of how specific problems were tackled, and with what success, as opposed to proposals unsupported by experience. The goal was to permit the audience to profit from the trials (and errors) of others. The eighteen papers presented are: "Business and the University Computer…

Synthetic Nanovaccines Against Respiratory Pathogens (SYNARP). Addendum

DTIC Science & Technology

2014-09-01

and c) block ionomer complexes (BIC) for targeted delivery of DNA (or protein) antigen to the antigen presenting cells (APCs) (Platform C). The...immune cells to elicit most efficient immune response. The proposal was focusing on achieving the following specific technical objectives: 1) Develop...muscle in a mouse (Platform B & C). ACCOMPLISHED YEAR 3 Task 1: Determine optimal antigen-containing BPN that activate dendritic cells (DCs

77 FR 31868 - Notice of Submission of Proposed Information Collection to OMB; Office of Native American...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-30

... Proposed Information Collection to OMB; Office of Native American Programs (ONAP) Training and Technical.... 552) authorizes HUD to award training and technical assistance contracts on a competitive basis. HUD intends to competitively award training and technical assistance contracts to national and regional...

77 FR 16250 - Notice of Proposed Information Collection for Public Comment; Office of Native American Programs...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-20

... Information Collection for Public Comment; Office of Native American Programs (ONAP) Training and Technical... subject proposal. The data required by Office of Native American Programs Training and Technical... progress. The data identifies needs, outputs and outcomes of the training and technical assistance. DATES...

"You Will": Technology, Magic, and the Cultural Contexts of Technical Communication.

ERIC Educational Resources Information Center

Kitalong, Karla Saari

2000-01-01

Provides some background on the use of magical language in technical contexts, gives examples of magical discourse in technology advertisements and newsmagazine articles, and proposes a technical communication pedagogy of media analysis. Notes that the proposed pedagogy involves students conducting diagnostic critiques of media texts and affords…

14 CFR 1260.17 - Evaluation and selection of unsolicited proposals.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... NASA recommends contact with NASA technical personnel before submission of an unsolicited proposal to...) prepared by the cognizant technical office. The JAUP shall be submitted for the approval of the grant officer after review and concurrence at a level above the technical officer. However, review and...

76 FR 45589 - Notice of Submission of Proposed Information Collection to OMB; Application for Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-29

...: Application for Technical Assistance for Community Planning and Development (CPD) Programs. OMB Approval... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5480-N-71] Notice of Submission of Proposed Information Collection to OMB; Application for Technical Assistance for Community Planning and...

76 FR 35231 - Notice of Proposed Information Collection for Public Comment; McKinney-Vento Technical Assistance...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-16

... Information Collection for Public Comment; McKinney-Vento Technical Assistance Narrative, Matrices, and... Narrative, Matrices, and Reporting Requirements. Description of the need for the information proposed: McKinney- Vento Technical Assistance (MV-TA) Narrative, Matrices, and Reporting Requirements will allow the...

[Guideline for the assessment of clinical research proposals. Comisión Nacional de Investigación Científica del Instituto Mexicano del Seguro Social].

PubMed

Mejía-Aranguré, Juan Manuel; Grijalva-Otero, Israel; Majluf-Cruz, Abraham; Cruz-López, Miguel; Núñez-Enríquez, Juan Carlos; Salamanca-Gómez, Fabio Abdiel

2013-01-01

Medical research is a fundamental tool to achieve the advancement of science, through the improvement of strategies aimed to protect, promote and restore an individual's and society's health. Three characteristics are required to obtain approval of the research proposal: scientific relevance, technical quality and the accomplishment of ethical issues. The present review aimed at the determination of the specific criteria to perform a critical review of research proposals. A research was carried out in the PubMed, Medline, Ovid and Google Scholar databases, using the terms: peer review, research proposals, review and protocols, and reviewers. A total of 3546 related articles were reviewed, without finding a guide to critically assess research proposals. The guides to assess research articles consider that the quality criteria of the study should have been present since the study's conception; many of the issues described to review articles are incorporated in the review of the research proposals. The specific criteria were integrated to allow the reviewer to critically assess research proposals of different areas with scientific basis. The reviewer of research proposals should be considered as a professional that contributes to the promotion of knowledge advancement through his/her comments, which allow researchers to improve the quality of research proposals.

Development of noise emission measurement specifications for color printing multifunctional devices

NASA Astrophysics Data System (ADS)

Kimizuka, Ikuo

2005-09-01

Color printing (including copying) is becoming more popular application in home, as well as in offices. Existing de jule and/or industrial standards (such as ISO 7779, ECMA-74, ANSI S12.10 series, etc.), however, state only monochrome patterns, which are mainly intended for acoustic noise testing of mechanical impact type printers. This paper discusses the key issues and corresponding resolutions for development of color printing patterns for acoustic noise measurements. The results of these technical works will be published by JBMS-74 (new industry standard of JBMIA within 2005), and hopefully be the technical basis of updating other standards mentioned above. This paper also shows the development processes and key features of proposed patterns.

First satellite mobile communication trials using BLQS-CDMA

NASA Technical Reports Server (NTRS)

Luzdemateo, Maria; Johns, Simon; Dothey, Michel; Vanhimbeeck, Carl; Deman, Ivan; Wery, Bruno

1993-01-01

In this paper, technical results obtained in the first MSBN Land mobile technical trial are reported. MSBN (Mobile Satellite Business Network) is a new program undertaken by the European Space Agency (ESA) to promote mobile satellite communication in Europe, in particular voice capability. The first phase of the MSBN system implementation plan is an experimental phase. Its purpose is to evaluate through field experiments the performance of the MSBN system prior to finalization of its specifications. Particularly, the objective is to verify in the field and possibly improve the performance of the novel satellite access technique BLQS-CDMA (Band Limited Quasi-Synchronous-Code Division Multiple Access), which is proposed as baseline for the MSBN.

7 CFR 652.33 - Notice of proposed decertification.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., return receipt requested, to the technical service provider proposed for decertification a written Notice... CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE...

48 CFR 452.215-71 - Instructions for the Preparation of Technical and Business Proposals.

Code of Federal Regulations, 2010 CFR

2010-10-01

... contained in the technical proposal so that the contractor's understanding of the statement of work may be... required if appropriate.) (2) Business Proposal. (a) Furnish financial statements for the last two years... specified in the statement of work. Any “alternate” proposal may be considered if overall performance would...

78 FR 32476 - Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-426...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-30

... Standard Technical Specification (STS): NUREG-1432, ``Standard Technical Specifications Combustion..., Washington, DC 20555- 0001. SUPPLEMENTARY INFORMATION: TSTF-426, Revision 5, is applicable to all Combustion...

10 CFR 603.420 - Disclosure of information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... types that are exempt: (i) Proposals, proposal abstracts, and supporting documents; and (ii) Business plans and technical information submitted on a confidential basis. (c) If proposers desire to protect business plans and technical information for five years from FOIA disclosure requirements, they must mark...

Edwin I. Hatch nuclear plant implementation of improved technical specifications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mahler, S.R.; Pendry, D.

1994-12-31

Edwin I. Hatch nuclear plant consists of two General Electric boiling water reactor/4 units, with a common control room and a common refueling floor. In March 1993, Hatch began conversion of both units` technical specifications utilizing NUREG 1433. The technical specifications amendment request was submitted February 25, 1994. Issuance is scheduled for October 21, 1994, with implementation on March 15, 1994. The current unit-1 technical specifications are in the {open_quotes}custom{close_quotes} format, and the unit-2 technical specifications are in the old standard format. Hatch previously relocated the fire protection and radiological technical specifications requirements. The Hatch conversion will provide consistency betweenmore » the two units, to the extent practicable.« less

76 FR 32967 - Proposed Extensions and Waivers: National Early Childhood Technical Assistance Center

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-07

... DEPARTMENT OF EDUCATION [CFDA No. 84.326H] Proposed Extensions and Waivers: National Early Childhood Technical Assistance Center AGENCY: Office of Special Education Programs, Office of Special Education and Rehabilitative Services, Department of Education. ACTION: Notice of proposed extension of...

77 FR 56421 - Standards of Performance for Petroleum Refineries; Standards of Performance for Petroleum...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-12

...On June 24, 2008, the EPA promulgated amendments to the Standards of Performance for Petroleum Refineries and new standards of performance for petroleum refinery process units constructed, reconstructed or modified after May 14, 2007. The EPA subsequently received three petitions for reconsideration of these final rules. On September 26, 2008, the EPA granted reconsideration and issued a stay for the issues raised in the petitions regarding process heaters and flares. On December 22, 2008, the EPA addressed those specific issues by proposing amendments to certain provisions for process heaters and flares and extending the stay of these provisions until further notice. The EPA also proposed technical corrections to the rules for issues that were raised in the petitions for reconsideration. In this action, the EPA is finalizing those amendments and technical corrections and is lifting the stay of all the provisions granted on September 26, 2008 and extended until further notice on December 22, 2008.

Technology Candidates for Air-to-Air and Air-to-Ground Data Exchange

NASA Technical Reports Server (NTRS)

Haynes, Brian D.

2015-01-01

Technology Candidates for Air-to-Air and Air-to-Ground Data Exchange is a two-year research effort to visualize the U. S. aviation industry at a point 50 years in the future, and to define potential communication solutions to meet those future data exchange needs. The research team, led by XCELAR, was tasked with identifying future National Airspace System (NAS) scenarios, determining requirements and functions (including gaps), investigating technical and business issues for air, ground, & air-to-ground interactions, and reporting on the results. The project was conducted under technical direction from NASA and in collaboration with XCELAR's partner, National Institute of Aerospace, and NASA technical representatives. Parallel efforts were initiated to define the information exchange functional needs of the future NAS, and specific communication link technologies to potentially serve those needs. Those efforts converged with the mapping of each identified future NAS function to potential enabling communication solutions; those solutions were then compared with, and ranked relative to, each other on a technical basis in a structured analysis process. The technical solutions emerging from that process were then assessed from a business case perspective to determine their viability from a real-world adoption and deployment standpoint. The results of that analysis produced a proposed set of future solutions and most promising candidate technologies. Gap analyses were conducted at two points in the process, the first examining technical factors, and the second as part of the business case analysis. In each case, no gaps or unmet needs were identified in applying the solutions evaluated to the requirements identified. The future communication solutions identified in the research comprise both specific link technologies and two enabling technologies that apply to most or all specific links. As a result, the research resulted in a new analysis approach, viewing the underlying architecture of ground-air and air-air communications as a whole, rather than as simple "link to function" paired solutions. For the business case analysis, a number of "reference architectures" were developed for both the future technologies and the current systems, based on three typical configurations of current aircraft. Current and future costs were assigned, and various comparisons made between the current and future architectures. In general, it was assumed that if a future architecture offers lower cost than the current typical architecture, while delivering equivalent or better performance, it is likely that the future solution will gain industry acceptance. Conversely, future architectures presenting higher costs than their current counterparts must present a compelling benefit case in other areas or risk a lack of industry acceptance. The business case analysis consistently indicated lower costs for the proposed future architectures, and in most cases, significantly so. The proposed future solutions were found to offer significantly greater functionality, flexibility, and growth potential over time, at lower cost, than current systems. This was true for overall, fleet-wide equipage for domestic and oceanic air carriers, as well as for single, General Aviation (GA) aircraft. The overall research results indicate that all identified requirements can be met by the proposed solutions with significant capacity for future growth. Results also illustrate that the majority of the future communication needs can be met using currently allocated aviation RF spectrum, if used in more effective ways than it is today. A combination of such optimized aviation-specific links and commercial communication systems meets all identified needs for the 50-year future and beyond, with the caveat that a new, overall function will be needed to manage all information exchange, individual links, security, cost, and other factors. This function was labeled "Delivery Manager" (DM) within this research. DM employs a distributed client/server architecture, for both airborne and ground communications architectures. Final research results included identifying the most promising candidate technologies for the future system, conclusions and recommendations, and identifying areas where further research should be considered.

7 CFR 1709.123 - Evaluation criteria and weights.

Code of Federal Regulations, 2010 CFR

2010-01-01

... design and technical merit criteria shall not be less than 65 percent of the total available points, and... announcement. (b) Project design and technical merit. In reviewing the grant proposal's project design and... the proposed design, construction, equipment and materials for the proposed energy facilities to...

FY 2016 Grant Announcement: FY 2016 Technical Analysis and Programmatic Evaluation Support to the Chesapeake Bay Program Partnership

EPA Pesticide Factsheets

The U.S. Environmental Protection Agency’s Chesapeake Bay Program Office is announcing a Request for Proposals for applicants to provide the Chesapeake Bay Program partners with a proposal(s) for providing technical analysis and programmatic evaluation

Engineering of the institutionalization of the circular economy at the level of casting production

NASA Astrophysics Data System (ADS)

Vescan, M. M.; Soporan, V. F.; Crișan, D. M.; Lehene, T. R.; Pădurețu, S.; Samuila, V.

2017-06-01

This paper is motivated by the necessity of introducing the principles of circular economy at the level of different social - economic activities, and from this point of view one of the fields with a special potential is that of the manufacture of castings. Objective: to connect to the organizing and application of the methodology of the circular economy principles. The proposed method is an innovating one, being connected to the use of institutionalization engineering. Formulating the subject: The subject formulated to be solved aims at the introduction of new approaches, defined through institutionalization engineering, which proposes to set the correlation of actions between the specifics of the circular economy and the specific elements of the manufacture of castings. Research method: An institutional structuring operation was imposed for the optimization of the research method, in which different versions interact at the following levels: the level of public policies, the level of the regulatory framework, the level of technical solutions and the level of financing solutions and financial instruments. The determination of the optimal solution established in a dynamic context, favorable for the requirements of the different actors present within the process, appeals to the elements of critical thinking, specific for the engineer’s actions. Achievement of the research activity: The research activity structures a methodology of quantifying the contributions of each stage of the manufacturing process for castings at the fulfilling of the specific conditions of the circular economy, indicating the critical areas of action for more efficient actions of the circular economy, according to the market economy requirements, where there is a potential of implementing the technical solutions by quantizing the financial solutions and the opportunity of using the financial instruments. The major contribution of the research: The proposed methodology, with examples at the level of castings manufacture, sets the bases of a new field of action of the engineering thinking, namely, that of circular economy institutionalization functioning. Conclusions of the research activity: The proposed methodology represents the bases of establishing a new instrument of action at the level of institutionalized functioning of the circular economy.

76 FR 7810 - Notice of Proposed Change to Section I of the South Dakota and North Dakota State Technical Guides

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-11

... must be made to the NRCS State Technical Guides concerning State wetland mapping conventions. The two States are proposing to issue joint State wetland mapping conventions. The joint State wetland mapping conventions will be used as part of the technical documents to conduct wetland determinations on agriculture...

49 CFR Appendix C to Part 553 - Statement of Policy: Implementation of the United Nations/Economic Commission for Europe (UN/ECE...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 1. Notice Requesting Written Comment on Proposed Global Technical Regulations a. Proposals by the U.... Notice Requesting Written Comment on Recommended Global Technical Regulations If a working party of... comments and develop a U.S. position on the recommended technical regulation. 3. Notice Requesting Written...

48 CFR 1352.215-75 - Evaluation criteria.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Evaluation Factors. Factor 1—TECHNICAL APPROACH. The proposal will be evaluated on how the offeror intends to... as an example only.] In determining which proposal provides the best value to the Government, non... integrated assessment of the technical and cost/price proposals, the Government may make an award to other...

76 FR 31356 - Notice of Proposed Information Collection for Public Comment; Technical Assistance Experience...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-31

... Matrices AGENCY: Office of the Community Planning and Development. ACTION: Notice of proposed information..., Expertise, and Awards Received Matrices. Description of the need for the information proposed: The Technical Assistance Experience, Expertise, and Awards Received Matrices will allow the Office of Special Needs...

Designing with Protocells: Applications of a Novel Technical Platform

PubMed Central

Armstrong, Rachel

2014-01-01

The paper offers a design perspective on protocell applications and presents original research that characterizes the life-like qualities of the Bütschli dynamic droplet system, as a particular “species” of protocell. Specific focus is given to the possibility of protocell species becoming a technical platform for designing and engineering life-like solutions to address design challenges. An alternative framing of the protocell, based on process philosophy, sheds light on its capabilities as a technology that can deal with probability and whose ontology is consistent with complexity, nonlinear dynamics and the flow of energy and matter. However, the proposed technical systems do not yet formally exist as products or mature technologies. Their potential applications are therefore experimentally examined within a design context as architectural “projects”—an established way of considering proposals that have not yet been realized, like an extended hypothesis. Exemplary design-led projects are introduced, such as The Hylozoic Ground and Future Venice, which aim to “discover”, rather than “solve”, challenges to examine a set of possibilities that have not yet been resolved. The value of such exploration in design practice is in opening up a set of potential directions for further assessment before complex challenges are procedurally implemented. PMID:25370381

76 FR 16785 - Meeting for Software Developers on the Technical Specifications for Common Formats for Patient...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-25

... Software Developers on the Technical Specifications for Common Formats for Patient Safety Data Collection... designed as an interactive forum where PSOs and software developers can provide input on these technical... updated event descriptions, forms, and technical specifications for software developers. As an update to...

Specific character of sustainable innovative development of transport construction in self-regulation conditions

NASA Astrophysics Data System (ADS)

Gumba, Khuta; Belyaeva, Svetlana

2017-10-01

The providing of sustainable development is impossible without activating the innovative activity of backbone economical sectors, in particular of transport construction. The system of self-regulation of activities is a specific feature of the transport industry development. The authors carried out the correlation analysis of innovative activity of construction enterprises, which proved the necessity of improving the normative and technical documents. The authors proposed and calculated the index of the legislation stability in the industry. The article suggests recommendations on the activation of innovative development in construction industry basing on the results of the modeling.

Experimental tests and radiometric calculations for the feasibility of fluorescence LIDAR-based discrimination of oil spills from UAV

NASA Astrophysics Data System (ADS)

Raimondi, Valentina; Palombi, Lorenzo; Lognoli, David; Masini, Andrea; Simeone, Emilio

2017-09-01

This paper presents experimental tests and radiometric calculations for the feasibility of an ultra-compact fluorescence LIDAR from an Unmanned Air Vehicle (UAV) for the characterisation of oil spills in natural waters. The first step of this study was to define the experimental conditions for a LIDAR and its budget constraints on the basis of the specifications of small UAVs already available on the market. The second step consisted of a set of fluorescence LIDAR measurements on oil spills in the laboratory in order to propose a simplified discrimination method and to calculate the oil fluorescence conversion efficiency. Lastly, the main technical specifications of the payload were defined and radiometric calculations carried out to evaluate the performances of both the payload and the proposed discrimination method.

NASA RECON: Course development, administration, and evaluation. A research and development proposal

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Roquemore, Leroy

1984-01-01

This proposal addresses the development, administration, and evaluation of a set of transportable, college-level courses to educate science and engineering students in the effective use of automated scientific and technical information storage and retrieval systems, and, in particular, in the use of the NASA RECON system. Chapter 1 presents a brief introduction. Chapter 2 identifies general and specific objectives, i.e., needs analysis, course development, course administration, and course evaluation. Chapter 3 proposes the methodology to be used in successfully accomplishing these objectives. Chapter 4 highlights expected results and product deliverables, and Chapter 5 presents the project evaluation plan to be followed. Chapter 6 is a brief overview of the institutional resources available at the proposing institutions, i.e., at the University of Southwestern Louisiana and at Southern University to support the project. Chapter 7 proposes a budget, time schedule, and management plan. Chapter 8 is a summary of the foregoing.

77 FR 27814 - Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-11

... NUCLEAR REGULATORY COMMISSION [Project No. 753; NRC-2012-0019] Model Safety Evaluation for Plant... Regulatory Commission (NRC) is announcing the availability of the model safety evaluation (SE) for plant... the Improved Standard Technical Specification (ISTS), NUREG-1431, ``Standard Technical Specifications...

45 CFR 162.920 - Availability of implementation specifications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... implementation specifications and the Technical Reports Type 3 described in subparts I through S of this part... implementation specifications, which include the Technical Reports Type 3 described in this section, for... part 51. The implementation specifications and Technical Reports Type 3 described in this section are...

48 CFR 915.404-2 - Information to support proposal analysis.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for the auditor's review. (ii) Copies of technical analysis reports prepared by DOE technical or other... proposal analysis. 915.404-2 Section 915.404-2 Federal Acquisition Regulations System DEPARTMENT OF ENERGY... support proposal analysis. (a)(1) Field pricing assistance as discussed in FAR 15.404-2(a) is not required...

Program of scientific investigations and development of solid-oxide fuel cells (SOFC) in VNIITF. Proposals on scientific and technical collaboration and SOFC commercialization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kleschev, Yu.N.; Chukharev, V.F.

1996-04-01

This paper describes proposals on scientific and technical collaborations pertaining to solid oxide fuel cell commercialization. Topics included for discussion are: materials research and manufacture; market estimation and cost; directions of collaboration; and project of proposals on joint enterprise creation.

23 CFR 636.209 - What items must be included in a phase-two solicitation?

Code of Federal Regulations, 2010 CFR

2010-04-01

.... (b) At your discretion, you may allow proposers to submit alternate technical concepts in their proposals as long as these alternate concepts do not conflict with criteria agreed upon in the environmental decision making process. Alternate technical concept proposals may supplement, but not substitute for base...

Cultivating Advanced Technical Writing Skills through a Graduate-Level Course on Writing Research Proposals

ERIC Educational Resources Information Center

McCarthy, Brian D.; Dempsey, Jillian L.

2017-01-01

A graduate-level course focused on original research proposals is introduced to address the uneven preparation in technical writing of new chemistry graduate students. This course focuses on writing original research proposals. The general course structure features extensive group discussions, small-group activities, and regular in-class…

Semiannual Technical Report

NASA Technical Reports Server (NTRS)

1997-01-01

This report covers the third six month period of the subject contract from January 26, 1997 to July 26, 1997. The contract statement of work covers four specific applications of Aeromover's 'N'-output differential technology that are being developed in cooperation with industry and NASA. A quantitative description of work, project difficulties, proposed solutions, and a statement of the work that will be performed during the next six months has been included for each of the four projects.

A Customized Quantitative PCR MicroRNA Panel Provides a Technically Robust Context for Studying Neurodegenerative Disease Biomarkers and Indicates a High Correlation Between Cerebrospinal Fluid and Choroid Plexus MicroRNA Expression.

PubMed

Wang, Wang-Xia; Fardo, David W; Jicha, Gregory A; Nelson, Peter T

2017-12-01

MicroRNA (miRNA) expression varies in association with different tissue types and in diseases. Having been found in body fluids including blood and cerebrospinal fluid (CSF), miRNAs constitute potential biomarkers. CSF miRNAs have been proposed as biomarkers for neurodegenerative diseases; however, there is a lack of consensus about the best candidate miRNA biomarkers and there has been variability in results from different research centers, perhaps due to technical factors. Here, we sought to optimize technical parameters for CSF miRNA studies. We examined different RNA isolation methods and performed miRNA expression profiling with TaqMan® miRNA Arrays. More specifically, we developed a customized CSF-miRNA low-density array (TLDA) panel that contains 47 targets: miRNAs shown previously to be relevant to neurodegenerative disease, miRNAs that are abundant in CSF, data normalizers, and controls for potential blood and tissue contamination. The advantages of using this CSF-miRNA TLDA panel include specificity, sensitivity, fast processing and data analysis, and cost effectiveness. We optimized technical parameters for this assay. Further, the TLDA panel can be tailored to other specific purposes. We tested whether the profile of miRNAs in the CSF resembled miRNAs isolated from brain tissue (hippocampus or cerebellum), blood, or the choroid plexus. We found that the CSF miRNA expression profile most closely resembles that of choroid plexus tissue, underscoring the potential importance of choroid plexus-derived signaling through CSF miRNAs. In summary, the TLDA miRNA array panel will enable evaluation and discovery of CSF miRNA biomarkers and can potentially be utilized in clinical diagnosis and disease stage monitoring.

[Formulation of technical specification for national survey of Chinese materia medica resources].

PubMed

Guo, Lan-Ping; Lu, Jian-Wei; Zhang, Xiao-Bo; Zhao, Run-Huai; Zhang, Ben-Gang; Sun, Li-Ying; Huang, Lu-Qi

2013-04-01

According to the process of the technical specification (TS) design for the fourth national survey of the Chinese materia medica resources (CMMR), we analyzed the assignment and objectives of the national survey and pointed out that the differences about CMMR management around China, the distribution of CMMR and their habitat, the economic and technological level, and even enthusiasm and initiative of the staff, etc. are the most difficult points for TS design. And we adopt the principle of combination of the mandatory and flexibility in TS design. We fixed the key points which would affect the quality of national survey first, then proposed the framework of TS which including 3 parts of organization and 11 parts of technique itself. The framework will serve and lead the TS preparation, which will not only provide an action standard to the national survey but will also have a profound influence to the popularization and application of the survey technology of CMMR. [Key words

Proposed modifications to the RCRA post-closure permit for the Chestnut Ridge Hydrogeologic Regime at the U.S. Department of Energy Y-12 Plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-05-01

This report presents proposed modifications to several conditions of the Resource Conservation and Recovery Act (RCRA) Post-Closure Permit (PCP) for the Chestnut Ridge Hydrogeologic Regime (CRHR) (permit number TNHW-088, EPA ID No. TN3 89 009 0001). These permit conditions define the requirements for RCRA post-closure detection groundwater monitoring at the Chestnut Ridge Sediment Disposal Basin (CRSDB) and Kerr Hollow Quarry (KHQ), and RCRA post-closure corrective action groundwater monitoring at the Chestnut Ridge Security Pits (CRSPs). Modification of these PCP conditions is requested to: (1) clarify the planned integration of RCRA post-closure corrective action groundwater monitoring at the CRSPs with themore » monitoring program to be established in the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) record of decision (ROD), (2) revise several of the current technical requirements for groundwater monitoring based on implementation of the RCRA monitoring programs during 1996, (3) replace several of the technical procedures included in the PCP with updated versions recently issued by the Y-12 Plant Groundwater Protection Program (GWPP), and (4) correct inaccurate regulatory citations and references to permit conditions and permit attachments. With these modifications, the Y- 12 Plant will continue to meet the full intent of all regulatory obligations for post-closure care of these facilities. Section 2 provides the technical justification for each proposed permit modification. Section 3.0 contains proposed changes to Section II of the PCP. Modifications to site-specific permit conditions are presented in Section 4.0 (CRSDB), Section 5.0 (CRSPs), and Section 6.0 (KHQ). Sections 7.0 and 8.0 reference updated and revised procedures for groundwater sampling, and monitoring well plugging and abandonment, respectively. Appendix A includes all proposed revisions to the permit attachments.« less

76 FR 43963 - Regional Haze State Implementation Plan; State of Nevada; Extension of Comment Period

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-22

... deadline for written comments on the proposed approval of the Regional Haze SIP by 30 days to August 22... technical materials that form the basis of Nevada's Regional Haze SIP and EPA's proposed approval. The EPA...'s proposed approval of the technical analyses presented in Nevada's plan. DATES: The comment period...

32 CFR 37.420 - Should I tell proposers that we will not disclose information that they submit?

Code of Federal Regulations, 2010 CFR

2010-07-01

... documents; and (ii) Business plans and technical information submitted on a confidential basis. (c) If proposers desire to protect business plans and technical information for five years from FOIA disclosure...

75 FR 16817 - Meeting for Software Developers on the Technical Specifications for Common Formats for Patient...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-02

... Software Developers on the Technical Specifications for Common Formats for Patient Safety Data Collection... software developers can provide input on these technical specifications for the Common Formats Version 1.1... specifications, which provide direction to software developers that plan to implement the Common Formats...

47 CFR 68.608 - Publication of technical criteria.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Attachments § 68.608 Publication of technical criteria. The Administrative Council for Terminal Attachments shall place technical criteria proposed for publication on public notice for 30 days. At the end of the... Attachments shall publish the technical criteria. ...

47 CFR 68.608 - Publication of technical criteria.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Attachments § 68.608 Publication of technical criteria. The Administrative Council for Terminal Attachments shall place technical criteria proposed for publication on public notice for 30 days. At the end of the... Attachments shall publish the technical criteria. ...

Air Quality Modeling Technical Support Document for the 2008 Ozone NAAQS Cross-State Air Pollution Rule Proposal

EPA Pesticide Factsheets

In this technical support document (TSD) we describe the air quality modeling performed to support the proposed Cross-State Air Pollution Rule for the 2008 ozone National Ambient Air Quality Standards (NAAQS)

CAD/CAM data management needs, requirements and options

NASA Technical Reports Server (NTRS)

Lopatka, R. S.; Johnson, T. G.

1978-01-01

The requirements for a data management system in support of technical or scientific applications and possible courses of action were reviewed. Specific requirements were evolved while working towards higher level integration impacting all phases of the current design process and through examination of commercially marketed systems and related data base research. Arguments are proposed for varied approaches in implementing data base systems ranging from no action necessary to immediate procurement of an existing data base management system.

Laser Technician Associate Degree Program. A Proposal Submitted to Wisconsin State Board of Vocational, Technical, and Adult Education. (Curriculum Development.) Final Report.

ERIC Educational Resources Information Center

North Central Technical Inst., Wausau, WI.

This final report contains the program proposal with supporting data for developing curriculum materials for and implementing an associate-degree laser technology program at the North Central Technical Institute. The proposal outline provides this information: (1) objectives for the program designed to prepare a technician to safely operate,…

[The development and implementation of polymerase chain reaction to detect in real-time operation mode yersinia pestis in field material].

PubMed

Afanas'ev, M V; Chipanin, E V; Shestakov, V E; Denisov, A V; Fomina, L A; Ostiak, A S; Balakhonov, S V

2013-03-01

The article presents the results of development and practical implementation of system of polymerase chain reaction testing in real-time operation mode to detect agent of plague infield material. In laboratory conditions the system demonstrated good results and hence it was applied in conditions of field laboratory of epidemiologic team during planned epizootologic examination of Gorno-Altaisk hot spot of plague. The sampling consisted of more than 1400 objects. It was demonstrated that high sensitivity and specificity is immanent to proposed system. The adaptation of the system to the real time amplifier "Smart Cycler" (Cephid, USA) having some specific technical characteristics makes it possible to consider the proposed test-system as an effective sensitive and precise instrument for screening studies in the process of regular epizootologic examinations of hot spots of plague.

48 CFR 1352.215-70 - Proposal preparation.

Code of Federal Regulations, 2012 CFR

2012-10-01

...; justifications for noncompetitive proposed subcontracts; identification of technical data to be withheld; and any... evaluation factor.] Evaluation Factor 1—Technical Approach. Provide information on how the project is to be organized, staffed, and managed that demonstrates the offeror's understanding and effective management of...

Semantic and syntactic interoperability in online processing of big Earth observation data.

PubMed

Sudmanns, Martin; Tiede, Dirk; Lang, Stefan; Baraldi, Andrea

2018-01-01

The challenge of enabling syntactic and semantic interoperability for comprehensive and reproducible online processing of big Earth observation (EO) data is still unsolved. Supporting both types of interoperability is one of the requirements to efficiently extract valuable information from the large amount of available multi-temporal gridded data sets. The proposed system wraps world models, (semantic interoperability) into OGC Web Processing Services (syntactic interoperability) for semantic online analyses. World models describe spatio-temporal entities and their relationships in a formal way. The proposed system serves as enabler for (1) technical interoperability using a standardised interface to be used by all types of clients and (2) allowing experts from different domains to develop complex analyses together as collaborative effort. Users are connecting the world models online to the data, which are maintained in a centralised storage as 3D spatio-temporal data cubes. It allows also non-experts to extract valuable information from EO data because data management, low-level interactions or specific software issues can be ignored. We discuss the concept of the proposed system, provide a technical implementation example and describe three use cases for extracting changes from EO images and demonstrate the usability also for non-EO, gridded, multi-temporal data sets (CORINE land cover).

Semantic and syntactic interoperability in online processing of big Earth observation data

PubMed Central

Sudmanns, Martin; Tiede, Dirk; Lang, Stefan; Baraldi, Andrea

2018-01-01

ABSTRACT The challenge of enabling syntactic and semantic interoperability for comprehensive and reproducible online processing of big Earth observation (EO) data is still unsolved. Supporting both types of interoperability is one of the requirements to efficiently extract valuable information from the large amount of available multi-temporal gridded data sets. The proposed system wraps world models, (semantic interoperability) into OGC Web Processing Services (syntactic interoperability) for semantic online analyses. World models describe spatio-temporal entities and their relationships in a formal way. The proposed system serves as enabler for (1) technical interoperability using a standardised interface to be used by all types of clients and (2) allowing experts from different domains to develop complex analyses together as collaborative effort. Users are connecting the world models online to the data, which are maintained in a centralised storage as 3D spatio-temporal data cubes. It allows also non-experts to extract valuable information from EO data because data management, low-level interactions or specific software issues can be ignored. We discuss the concept of the proposed system, provide a technical implementation example and describe three use cases for extracting changes from EO images and demonstrate the usability also for non-EO, gridded, multi-temporal data sets (CORINE land cover). PMID:29387171

77 FR 29935 - 2012 Technical Corrections, Clarifying and Other Amendments to the Greenhouse Gas Reporting Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

...The EPA is proposing to amend specific provisions of the Greenhouse Gas Reporting Rule to provide greater clarity and flexibility to facilities subject to reporting emissions from certain source categories. These source categories will report greenhouse gas (GHG) data for the first time in September of 2012. The proposed changes are not expected to significantly change the overall calculation and monitoring requirements of the Greenhouse Gas Reporting Rule or add additional requirements for reporters, but are expected to correct errors and clarify existing requirements in order to facilitate accurate and timely reporting. The EPA is also proposing confidentiality determinations for four new data elements for the fluorinated gas production source category of the Greenhouse Gas Reporting Rule. Lastly, we are proposing an amendment to Table A-7 of the general provisions to add a data element used as an input to an emission equation in the fluorinated gas production source category.

CF60 Concrete Composition Design and Application on Fudiankou Xijiang Super Large Bridge

NASA Astrophysics Data System (ADS)

Qiu, Yi Mei; Wen, Sen Yuan; Chen, Jun Xiang

2018-06-01

Guangxi Wuzhou City Ring Road Fudiankou Xijiang super large bridge CF60 concrete is a new multi-phase composite high-performance concrete, this paper for the Fudiankou Xijiang bridge structure and characteristics of the project, in accordance with the principle of local materials and technical specification requirements, combined with the site conditions of CF60 engineering high performance concrete component materials, proportion and the technical performance, quantify the main physical and mechanical performance index. Analysis main influencing factors of the technical indicators, reasonable adjustment of concrete mix design parameters, and the use of technical means of admixture and multi-function composite admixture of concrete, obtain the optimal proportion of good work, process, mechanical properties stability and durability of engineering properties, recommend and verification of concrete mix; to explore the CF60 high performance concrete Soil in the Fudiankou Xijiang bridge application technology, detection and tracking the quality of concrete construction, concrete structure during the construction of the key technology and control points is proposed, evaluation of CF60 high performance concrete in the actual engineering application effect and benefit to ensure engineering quality of bridge structure and service life, and super long span bridge engineering construction to provide basis and reference.

Innovative methods of popularizing technical education

NASA Astrophysics Data System (ADS)

Shkitsa, L. Y.; Panchuk, V. G.; Kornuta, V. A.

2017-05-01

There have been analyzed reasons of the loss of technical education’s popularity. Also, the analysis of known educational and production methods, oriented at the innovative model of development of society, was performed. It is stated that the acquisition of 21st century’s skills as a result of competition of technical education are natural for the DIY ideology, which was realized in the institutions like Fab Lab. The new educational strategy, based on project-based learning, is proposed to be implemented as a special laboratory with equipment, which would be a center of innovative development for students at the Technical University. Moreover, the list of projects planned for implementation, that includes not only projects, specific to a particular university, but also projects, demanded by society as a whole, is specified. It is worth to implement trendy projects in the laboratory, such as toy-like, ecological projects; projects of the energy dependence decrease or the energy efficiency increase, modern digital or innovative projects etc. The student should gain knowledge, skills and, possibly, equipment that are available for immediate usage on the labor market or for the realization of his own projects or the community’s projects in everyday life after the realization of the particular project at the laboratory

78 FR 48407 - Defense Federal Acquisition Regulation Supplement: Clauses With Alternates-Quality Assurance...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-08

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or...

78 FR 46546 - Design-Build Contracting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-01

...-0043] RIN 2125-AF58 Design-Build Contracting AGENCY: Federal Highway Administration (FHWA), DOT. ACTION... alternative technical concepts (ATC) in design-build project delivery of highway construction. The revisions... design-build proposers to submit ATCs in their technical and price proposals. The FHWA seeks comments on...

76 FR 8720 - Notice of Proposed Solicitation for Cooperative Agreement Applications (SCAA)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-15

... Procurement Technical Assistance Program (PTAP) by awarding cost sharing cooperative agreements to assist eligible entities in establishing or maintaining procurement technical assistance centers (PTACs) pursuant... available for distribution. Written comments regarding this proposed SCAA may be submitted via mail to...

Optical network democratization.

PubMed

Nejabati, Reza; Peng, Shuping; Simeonidou, Dimitra

2016-03-06

The current Internet infrastructure is not able to support independent evolution and innovation at physical and network layer functionalities, protocols and services, while at same time supporting the increasing bandwidth demands of evolving and heterogeneous applications. This paper addresses this problem by proposing a completely democratized optical network infrastructure. It introduces the novel concepts of the optical white box and bare metal optical switch as key technology enablers for democratizing optical networks. These are programmable optical switches whose hardware is loosely connected internally and is completely separated from their control software. To alleviate their complexity, a multi-dimensional abstraction mechanism using software-defined network technology is proposed. It creates a universal model of the proposed switches without exposing their technological details. It also enables a conventional network programmer to develop network applications for control of the optical network without specific technical knowledge of the physical layer. Furthermore, a novel optical network virtualization mechanism is proposed, enabling the composition and operation of multiple coexisting and application-specific virtual optical networks sharing the same physical infrastructure. Finally, the optical white box and the abstraction mechanism are experimentally evaluated, while the virtualization mechanism is evaluated with simulation. © 2016 The Author(s).

7 CFR 1728.50 - Removal of an item from listing or technical acceptance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... equipment will be notified in writing of a proposal to remove such item from the listing or technical... unanimous, the item will be referred to Technical Standards Committee “B.” Written notice of Technical...” decision, a sponsor may appeal in writing to Technical Standards Committee “B” to review Committee “A's...

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Professional and technical... RESTRICTIONS ON LOBBYING Activities by Own Employees § 146.205 Professional and technical services. (a) The... technical services rendered directly in the preparation, submission, or negotiation of any bid, proposal, or...

12 CFR 1805.303 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... proposes to become a CDFI. Such technical assistance may include training for management and other... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Technical assistance. 1805.303 Section 1805.303... COMMUNITY DEVELOPMENT FINANCIAL INSTITUTIONS PROGRAM Use of Funds/Eligible Activities § 1805.303 Technical...

76 FR 23970 - Notice of Proposed Changes to Section IV of the Virginia State Technical Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

... DEPARTMENT OF AGRICULTURE Natural Resources Conservation Service Notice of Proposed Changes to Section IV of the Virginia State Technical Guide AGENCY: Natural Resources Conservation Service (NRCS), U..., 395, Stream Habitat Improvement and Management, 422, Hedgerow Planting, 643, Restoration and...

Technical Degrees and Higher Vocational Education

ERIC Educational Resources Information Center

Hordern, Jim

2017-01-01

This paper focuses on the proposals for the introduction of "technical degrees" in English higher education institutions advanced by the Labour Party's Liam Byrne in a document entitled "Robbins Rebooted" which was published in August 2014 by the Social Market Foundation. The context and rationale for the proposed technical…

45 CFR 162.920 - Availability of implementation specifications and operating rules.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Technical Report Type 3. The implementation specifications for the ASC X12N and the ASC X12 Standards for Electronic Data Interchange Technical Report Type 3 (and accompanying Errata or Type 1 Errata) may be... charged for all implementation specifications, including Technical Reports Type 3. Charging for such...

10 CFR 50.36a - Technical specifications on effluents from nuclear power reactors.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Technical specifications on effluents from nuclear power reactors. 50.36a Section 50.36a Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND...; Ineligibility of Certain Applicants § 50.36a Technical specifications on effluents from nuclear power reactors...

10 CFR 50.36a - Technical specifications on effluents from nuclear power reactors.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Technical specifications on effluents from nuclear power reactors. 50.36a Section 50.36a Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND...; Ineligibility of Certain Applicants § 50.36a Technical specifications on effluents from nuclear power reactors...

GREAT I Study of the Upper Mississippi River. Technical Appendixes. Volume 2. Floodplain Management, Dredged Material Uses, Dredging Requirements.

DTIC Science & Technology

1980-09-01

placement of dredged material is proposed, a quantitative analysis of the effects on the 1-percent chance flood be made. The analysis must include a...FPMWG will accept the site. b. Until a quantitative analysis is conducted, place- ment sites be selected following these guidelines. (1) Dredge4 material... Analysis of site-specific encroachments would continue to be made without considering the opposite bank impacts or the long-term cumulative effects. 5

Project-based physics labs using low-cost open-source hardware

NASA Astrophysics Data System (ADS)

Bouquet, F.; Bobroff, J.; Fuchs-Gallezot, M.; Maurines, L.

2017-03-01

We describe a project-based physics lab, which we proposed to third-year university students. These labs are based on new open-source low-cost equipment (Arduino microcontrollers and compatible sensors). Students are given complete autonomy: they develop their own experimental setup and study the physics topic of their choice. The goal of these projects is to let students to discover the reality of experimental physics. Technical specifications of the acquisition material and case studies are presented for practical implementation in other universities.

Inferior heel pain in soccer players: a retrospective study with a proposal for guidelines of treatment

PubMed Central

Saggini, Raoul; Migliorini, Maurizio; Carmignano, Simona Maria; Ancona, Emilio; Russo, Chiara; Bellomo, Rosa Grazia

2018-01-01

Background The cause of heel pain among soccer players is multifactorial and is related to repetitive microtrauma due to impact forces involving technical moves, but also the playground, the exercise mode, the recovery time, the climatic conditions and the footwear used. Aim To investigate the aetiology of plantar heel pain of soccer players with the objective of proposing an example of guidelines for treatment. Methods We investigated the prevalence and characteristics of inferior heel pain of 1473 professional, semiprofessional and amateur players. All evaluated subjects were submitted to a specific rehabilitation protocol that involved advanced physical therapies and viscoelastic insoles depending on the aetiology of pain. Results Clinical and instrumental examinations revealed that 960 of 1473 athletes had inferior heel pain. These patients were divided into seven groups based on aetiology: sural nerve compression, abductor digiti minimi compression, atrophy and inflammation of the fat pad, plantar fasciitis, stress injury of the heel spur, stress fracture of the heel bone and heel spur. The proposed rehabilitation treatment aims for a reduction of pain and an early return to sports, with excellent results. Conclusions According to what was observed in the present study, related also to the specific treatment of inferior heel pain, and considering the technological progress achieved in recent years, we can now propose an integrated therapeutic approach to treatment of heel pain, properly differentiated according to specific aetiology. PMID:29527319

75 FR 75453 - Proposed Information Collection; Comment Request; Technical Data Letter of Explanation

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-03

... Request; Technical Data Letter of Explanation AGENCY: Bureau of Industry and Security. ACTION: Notice....gov . SUPPLEMENTARY INFORMATION: I. Abstract These technical data letters of explanation will assure the Bureau of Industry and Security that U.S.-origin technical data will be exported only for...

75 FR 29732 - Career and Technical Education Program-Promoting Rigorous Career and Technical Education Programs...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-27

... DEPARTMENT OF EDUCATION Career and Technical Education Program--Promoting Rigorous Career and Technical Education Programs of Study Catalog of Federal Domestic Assistance (CFDA) Number: 84.051C. AGENCY: Office of Vocational and Adult Education, Department of Education. ACTION: Notice of proposed priorities...

48 CFR 252.227-7016 - Rights in bid or proposal information.

Code of Federal Regulations, 2014 CFR

2014-10-01

... terms “technical data” and “computer software” are defined in the Rights in Technical Data—Noncommercial... delivery of technical data, the term “computer software” is defined in the Rights in Noncommercial Computer... Research Program, the Rights in Noncommercial Technical Data and Computer Software—Small Business...

48 CFR 252.227-7016 - Rights in bid or proposal information.

Code of Federal Regulations, 2010 CFR

2010-10-01

... terms “technical data” and “computer software” are defined in the Rights in Technical Data—Noncommercial... delivery of technical data, the term “computer software” is defined in the Rights in Noncommercial Computer... Research Program, the Rights in Noncommercial Technical Data and Computer Software—Small Business...

48 CFR 252.227-7016 - Rights in bid or proposal information.

Code of Federal Regulations, 2011 CFR

2011-10-01

... terms “technical data” and “computer software” are defined in the Rights in Technical Data—Noncommercial... delivery of technical data, the term “computer software” is defined in the Rights in Noncommercial Computer... Research Program, the Rights in Noncommercial Technical Data and Computer Software—Small Business...

48 CFR 252.227-7016 - Rights in bid or proposal information.

Code of Federal Regulations, 2013 CFR

2013-10-01

... terms “technical data” and “computer software” are defined in the Rights in Technical Data—Noncommercial... delivery of technical data, the term “computer software” is defined in the Rights in Noncommercial Computer... Research Program, the Rights in Noncommercial Technical Data and Computer Software—Small Business...

48 CFR 252.227-7016 - Rights in bid or proposal information.

Code of Federal Regulations, 2012 CFR

2012-10-01

... terms “technical data” and “computer software” are defined in the Rights in Technical Data—Noncommercial... delivery of technical data, the term “computer software” is defined in the Rights in Noncommercial Computer... Research Program, the Rights in Noncommercial Technical Data and Computer Software—Small Business...

47 CFR 68.608 - Publication of technical criteria.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 3 2012-10-01 2012-10-01 false Publication of technical criteria. 68.608... Attachments § 68.608 Publication of technical criteria. The Administrative Council for Terminal Attachments shall place technical criteria proposed for publication on public notice for 30 days. At the end of the...

47 CFR 68.608 - Publication of technical criteria.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 3 2014-10-01 2014-10-01 false Publication of technical criteria. 68.608... Attachments § 68.608 Publication of technical criteria. The Administrative Council for Terminal Attachments shall place technical criteria proposed for publication on public notice for 30 days. At the end of the...

78 FR 52963 - 60-Day Notice of Proposed Information Collection: Technical Processing Requirements for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-27

... Information Collection: Technical Processing Requirements for Multifamily Project Mortgage Insurance AGENCY...: HUD is seeking approval from the Office of Management and Budget (OMB) for the information collection... interested parties on the proposed collection of information. The purpose of this notice is to allow for 60...

78 FR 53139 - Pesticide Product Registration; Receipt of Application for New Uses

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-28

...: Flonicamid. Product Name: Technical Flonicamid Insecticide. Proposed Use(s): Alfalfa, forage; alfalfa, hay; alfalfa, seed; clover, forage; clover, hay; fruit, pome (crop group 11-10); fruit, stone (crop group 12-12...: Flonicamid. Product Name: Technical Flonicamid Insecticide. Proposed Use(s): Alfalfa, forage; alfalfa, hay...

76 FR 23641 - Proposed Information Collection: Export Declaration of Defense Technical Data or Services

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-27

... DEPARTMENT OF STATE [Public Notice: 7431] Proposed Information Collection: Export Declaration of Defense Technical Data or Services AGENCY: Department of State. ACTION: Notice of request for public..., Directorate of Defense Trade Controls, Bureau of Political-Military Affairs, U.S. Department of State...

75 FR 34974 - Notice of Proposed Change to Section IV of the Virginia State Technical Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... DEPARTMENT OF AGRICULTURE Natural Resources Conservation Service Notice of Proposed Change to Section IV of the Virginia State Technical Guide AGENCY: Natural Resources Conservation Service (NRCS), U... Road, Suite 209, Richmond, Virginia 23229-5014; Telephone number (804) 287-1691; Fax number (804) 287...

77 FR 55180 - Notice of Proposed Changes to Section IV of the Virginia State Technical Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-07

... DEPARTMENT OF AGRICULTURE Natural Resources Conservation Service Notice of Proposed Changes to Section IV of the Virginia State Technical Guide AGENCY: Natural Resources Conservation Service (NRCS), U..., Virginia 23229-5014; Telephone number (804) 287-1691 or [email protected] Copies of the practice...

40 CFR 35.1640-1 - Application review criteria.

Code of Federal Regulations, 2010 CFR

2010-07-01

... information supplied by the applicant which address the following criteria: (1) The technical feasibility of...) of the Act. (6) The reasonableness of the proposed costs relative to the proposed work, the... presented in paragraph (a) of this section will be modified in relation to the smaller amount of technical...

76 FR 59382 - Notice of Proposed Change to Section IV of the Virginia State Technical Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-26

... DEPARTMENT OF AGRICULTURE Natural Resources Conservation Service Notice of Proposed Change to Section IV of the Virginia State Technical Guide AGENCY: Natural Resources Conservation Service (NRCS), U... Harvest Management, 657, Wetland Restoration, 658, Wetland Creation, and 659, Wetland Enhancement. These...

76 FR 27952 - Small Business Size Standards: Professional, Scientific and Technical Services.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... Administration (SBA or Agency) proposed to increase small business size standards for 35 industries and one sub... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG07 Small Business Size Standards: Professional, Scientific and Technical Services. AGENCY: U.S. Small Business Administration. ACTION: Proposed...

75 FR 30756 - Medicare Program; Supplemental Proposed Changes to the Hospital Inpatient Prospective Payment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-02

.... 93.773, Medicare--Hospital Insurance; and Program No. 93.774, Medicare-- Supplementary Medical... technical errors that appeared in the supplementary proposed rule entitled ``Medicare Program; Supplemental... Doc. 2010-12567 filed May 21, 2010, there are technical and typographical errors that are identified...

Repeated Kicking Actions in Karate: Effect on Technical Execution in Elite Practitioners.

PubMed

Quinzi, Federico; Camomilla, Valentina; Di Mario, Alberto; Felici, Francesco; Sbriccoli, Paola

2016-04-01

Training in martial arts is commonly performed by repeating a technical action continuously for a given number of times. This study aimed to investigate if the repetition of the task alters the proper technical execution, limiting the training efficacy for the technical evaluation during competition. This aim was pursued analyzing lower-limb kinematics and muscle activation during repeated roundhouse kicks. Six junior karate practitioners performed continuously 20 repetitions of the kick. Hip and knee kinematics and sEMG of vastus lateralis, biceps (BF), and rectus femoris were recorded. For each repetition, hip abduction-adduction and flexion-extension and knee flexion-extension peak angular displacements and velocities, agonist and antagonist muscle activation were computed. Moreover, to monitor for the presence of myoelectric fatigue, if any, the median frequency of the sEMG was computed. All variables were normalized with respect to their individual maximum observed during the sequence of kicks. Linear regressions were fitted to each normalized parameter to test its relationship with the repetition number. Linear-regression analysis showed that, during the sequence, the athletes modified their technique: Knee flexion, BF median frequency, hip abduction, knee-extension angular velocity, and BF antagonist activation significantly decreased. Conversely, hip flexion increased significantly. Since karate combat competitions require proper technical execution, training protocols combining severe fatigue and technical actions should be carefully proposed because of technique adaptations. Moreover, trainers and karate masters should consider including specific strength exercises for the BF and more generally for knee flexors.

77 FR 52553 - Standards of Performance for Stationary Gas Turbines; Standards of Performance for Stationary...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

...The EPA is proposing to amend the new source performance standards (NSPS) for stationary gas turbines and stationary combustion turbines. These amendments are primarily in response to issues raised by the regulated community. On July 6, 2006, the EPA promulgated amendments to the new source performance standards for stationary combustion turbines. On September 5, 2006, the Utility Air Regulatory Group filed a petition for reconsideration of certain aspects of the promulgated standards. The EPA is proposing to amend specific provisions in the NSPS to resolve issues and questions raised by the petition for reconsideration, and to address other technical and editorial issues. In addition, this proposed rule would amend the location and wording of existing paragraphs for clarity. The proposed amendments would increase the environmental benefits of the existing requirements because the emission standards would apply at all times. The proposed amendments would also promote efficiency by recognizing the environmental benefit of combined heat and power and the beneficial use of low energy content gases.

Novel Hierarchical Fall Detection Algorithm Using a Multiphase Fall Model.

PubMed

Hsieh, Chia-Yeh; Liu, Kai-Chun; Huang, Chih-Ning; Chu, Woei-Chyn; Chan, Chia-Tai

2017-02-08

Falls are the primary cause of accidents for the elderly in the living environment. Reducing hazards in the living environment and performing exercises for training balance and muscles are the common strategies for fall prevention. However, falls cannot be avoided completely; fall detection provides an alarm that can decrease injuries or death caused by the lack of rescue. The automatic fall detection system has opportunities to provide real-time emergency alarms for improving the safety and quality of home healthcare services. Two common technical challenges are also tackled in order to provide a reliable fall detection algorithm, including variability and ambiguity. We propose a novel hierarchical fall detection algorithm involving threshold-based and knowledge-based approaches to detect a fall event. The threshold-based approach efficiently supports the detection and identification of fall events from continuous sensor data. A multiphase fall model is utilized, including free fall, impact, and rest phases for the knowledge-based approach, which identifies fall events and has the potential to deal with the aforementioned technical challenges of a fall detection system. Seven kinds of falls and seven types of daily activities arranged in an experiment are used to explore the performance of the proposed fall detection algorithm. The overall performances of the sensitivity, specificity, precision, and accuracy using a knowledge-based algorithm are 99.79%, 98.74%, 99.05% and 99.33%, respectively. The results show that the proposed novel hierarchical fall detection algorithm can cope with the variability and ambiguity of the technical challenges and fulfill the reliability, adaptability, and flexibility requirements of an automatic fall detection system with respect to the individual differences.

Novel Hierarchical Fall Detection Algorithm Using a Multiphase Fall Model

PubMed Central

Hsieh, Chia-Yeh; Liu, Kai-Chun; Huang, Chih-Ning; Chu, Woei-Chyn; Chan, Chia-Tai

2017-01-01

Falls are the primary cause of accidents for the elderly in the living environment. Reducing hazards in the living environment and performing exercises for training balance and muscles are the common strategies for fall prevention. However, falls cannot be avoided completely; fall detection provides an alarm that can decrease injuries or death caused by the lack of rescue. The automatic fall detection system has opportunities to provide real-time emergency alarms for improving the safety and quality of home healthcare services. Two common technical challenges are also tackled in order to provide a reliable fall detection algorithm, including variability and ambiguity. We propose a novel hierarchical fall detection algorithm involving threshold-based and knowledge-based approaches to detect a fall event. The threshold-based approach efficiently supports the detection and identification of fall events from continuous sensor data. A multiphase fall model is utilized, including free fall, impact, and rest phases for the knowledge-based approach, which identifies fall events and has the potential to deal with the aforementioned technical challenges of a fall detection system. Seven kinds of falls and seven types of daily activities arranged in an experiment are used to explore the performance of the proposed fall detection algorithm. The overall performances of the sensitivity, specificity, precision, and accuracy using a knowledge-based algorithm are 99.79%, 98.74%, 99.05% and 99.33%, respectively. The results show that the proposed novel hierarchical fall detection algorithm can cope with the variability and ambiguity of the technical challenges and fulfill the reliability, adaptability, and flexibility requirements of an automatic fall detection system with respect to the individual differences. PMID:28208694

Analysis of Technical Specifications of the Egyptian and French Electronic Storybooks (e-Storybook)

ERIC Educational Resources Information Center

Atta, Mohammed Mahmoud; Abd El Wahab, Shaimaa Mahmoud

2015-01-01

This research aims at analysing technical specifications in a sample of Egyptian and French electronic storybooks (e-storybooks), to identify similarities and differences in technical specifications of children's e-storybooks and create a verified analysis list to be used for evaluation of e-storybooks. For this purpose, 32 e-storybooks in CD…

Definitional-mission report: Clean-coal-technology assistance project in Poland (final report). Export trade information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shrivastava, V.K.

1992-01-01

The new impending environmental law in Poland provides for strict environmental guidelines for coal preparation, washing, mine desalination, and application of commercially viable and economical clean coal technologies for utilization of coal. The government of Poland requested the U.S. Trade and Development Program (TDP) carry out a Definitional Mission to Poland to define the requirements of the Polish authorities and to prepare specific recommendations for follow on actions by TDP. The technical assistance package proposed to be funded by TDP includes two specific activities. These are (i) an orientation visit to review selected clean coal technology projects in the U.S.,more » and (ii) preparation of a compendium of the main coal sector requirements in Poland and the types of technologies needed. The Definitional Mission has prepared a Scope of Work which recommends that TDP allocate a fund to finance the cost of the above technical assistance activities. It is further recommended that TDP enlist the assistance of a non-profit trade organization to provide this assistance to the Polish government.« less

[The development and evaluation of software to verify diagnostic accuracy].

PubMed

Jensen, Rodrigo; de Moraes Lopes, Maria Helena Baena; Silveira, Paulo Sérgio Panse; Ortega, Neli Regina Siqueira

2012-02-01

This article describes the development and evaluation of software that verifies the accuracy of diagnoses made by nursing students. The software was based on a model that uses fuzzy logic concepts, including PERL, the MySQL database for Internet accessibility, and the NANDA-I 2007-2008 classification system. The software was evaluated in terms of its technical quality and usability through specific instruments. The activity proposed in the software involves four stages in which students establish the relationship values between nursing diagnoses, defining characteristics/risk factors and clinical cases. The relationship values determined by students are compared to those of specialists, generating performance scores for the students. In the evaluation, the software demonstrated satisfactory outcomes regarding the technical quality and, according to the students, helped in their learning and may become an educational tool to teach the process of nursing diagnosis.

77 FR 37710 - Notice of Proposed Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-22

... to continue the collection of information for two technical training program course effectiveness... approval. This collection is for OSM's Technical Training Program Course Effectiveness Evaluations (1029... collection activity: Title: Technical Training Program Course Effectiveness Evaluation. OMB Control Number...

75 FR 47259 - Notice of Proposed Change to Section IV of the Virginia State Technical Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-05

... DEPARTMENT OF AGRICULTURE Natural Resources Conservation Service Notice of Proposed Change to Section IV of the Virginia State Technical Guide AGENCY: Natural Resources Conservation Service (NRCS), U..., Virginia 23229-5014; Telephone number (804) 287-1691; Fax number (804) 287-1737. Copies of the practice...

76 FR 38200 - Notice of Submission of Proposed Information Collection to OMB; Public Housing Assessment System...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-29

... Proposed Information Collection to OMB; Public Housing Assessment System (PHAS) Appeals, Technical Reviews... Management and Budget (OMB) for review, as required by the Paperwork Reduction Act. The Department is... housing agencies (PHAs) may submit a request for a technical review, database adjustment or appeal. The...

Promoting Teachers' Learning and Knowledge Building in a Socio-Technical System

ERIC Educational Resources Information Center

Tammets, Kairit; Pata, Kai; Laanpere, Mart

2013-01-01

The study proposes a way in which the learning and knowledge building (LKB) framework, which is consistent with the knowledge conversion phases proposed by Nonaka and Takeuchi, supports teachers' informal and self-directed workplace learning. An LKB framework in a socio-technical system was developed to support professional development in an…

77 FR 53903 - Notice of Proposed Information Collection for Public Comment: OneCPD Technical Assistance and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-04

... Information Collection for Public Comment: OneCPD Technical Assistance and Capacity Building Needs Assessment... Needs Assessment. Description of the need for the information proposed: The OneCPD Needs Assessment will... to identify trends in TA needs across grantees and assist in prioritizing the development of tools...

Application of Recommended Design Practices for Conceptual Nuclear Fusion Space Propulsion Systems

NASA Technical Reports Server (NTRS)

Williams, Craig H.

2004-01-01

An AIAA Special Project Report was recently produced by AIAA's Nuclear and Future Flight Propulsion Technical Committee and is currently in peer review. The Report provides recommended design practices for conceptual engineering studies of nuclear fusion space propulsion systems. Discussion and recommendations are made on key topics including design reference missions, degree of technological extrapolation and concomitant risk, thoroughness in calculating mass properties (nominal mass properties, weight-growth contingency and propellant margins, and specific impulse), and thoroughness in calculating power generation and usage (power-flow, power contingencies, specific power). The report represents a general consensus of the nuclear fusion space propulsion system conceptual design community and proposes 15 recommendations. This paper expands on the Report by providing specific examples illustrating how to apply each of the recommendations.

Atmospheric studies in complex terrain: a planning guide for future studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Orgill, M.M.

The objective of this study is to assist the US Department of Energy in Conducting its atmospheric studies in complex terrain (ASCOT0 by defining various complex terrain research systems and relating these options to specific landforms sites. This includes: (1) reviewing past meteorological and diffusion research on complex terrain; (2) relating specific terrain-induced airflow phenomena to specific landforms and time and space scales; (3) evaluating the technical difficulty of modeling and measuring terrain-induced airflow phenomena; and (4) avolving severdal research options and proposing candidate sites for continuing and expanding field and modeling work. To evolve research options using variable candidatemore » sites, four areas were considered: site selection, terrain uniqueness and quantification, definition of research problems and research plans. 36 references, 111 figures, 20 tables.« less

Advanced transportation system studies, technical area 3. Alternate propulsion subsystem concepts: J-2S restart study

NASA Astrophysics Data System (ADS)

Vilja, John; Levack, Daniel

1993-04-01

The objectives were to assess what design changes would be required to remit late production of the J-2S engine for use as a large high energy upper stage engine. The study assessed design changes required to perform per the J-2S model specification, manufacturing changes required due to obsolescence or improvements in state-of-the-practice, availability issues for supplier provided items, and provided cost and schedule estimates for this configuration. The confidence that J-2S production could be reinitiated within reasonable costs and schedules was provided. No significant technical issues were identified in either the producibility study or in the review of previous technical data. Areas of potential cost reduction were identified which could be quantified to a greater extent with further manufacturing planning. The proposed schedule can be met with no foreseeable impacts. The results of the study provided the necessary foundation for the detailed manufacturing and test plans and non-recurring and recurring cost estimates that are needed to complete the effort to reinitiate production of the J-2S engine system.

48 CFR 1348.102 - Policies.

Code of Federal Regulations, 2010 CFR

2010-10-01

...-submitted Value Engineering Change Proposals (VECPs) to the appropriate technical personnel for review. (b) Technical personnel shall conduct a comprehensive review of VECPs for technical feasibility, usefulness, and adequacy of the contractor's estimate of cost savings; make a written report; and recommend acceptance or...

Development of a competency framework for the nutrition in emergencies sector.

PubMed

Meeker, Jessica; Perry, Abigail; Dolan, Carmel; Emary, Colleen; Golden, Kate; Abla, Caroline; Walsh, Anne; Maclaine, Ali; Seal, Andrew

2014-03-01

There is a recognised need to strengthen capacity in the nutrition in emergencies sector and for greater clarity on the role of emergency nutritionists and the skills they require. Competency frameworks are an important tool for human resource development and have been developed for several other humanitarian sectors. We therefore developed a technical competency framework for practitioners in nutrition in emergencies. Existing competency frameworks were reviewed and interviews conducted to explore methods used in developing competency frameworks for other sectors. Competencies were identified through interviews with field experts, feedback from course trainees, academic course content and job specifications. Competencies were then categorised and behavioural indicators developed for each. The draft framework was then reviewed by members of the Global Nutrition Cluster and modified in an iterative process. Global. Not applicable. A wide range of competencies were identified as essential for nutritionists working in emergencies, covering technical skills and general core competencies. The proposed framework contains twenty competency areas with 161 behavioural indicators categorised into three levels, corresponding to the requirements of progressively more senior roles. Many of the competencies are common across development and emergency nutrition. The proposed technical competency framework should prove to be a valuable tool in creating standards within the sector and promoting effective capacity strengthening and professionalisation. Continued research is needed to validate the framework, optimise methods for assessment, develop approaches to integrate it within the sector and measure its impact on performance.

High-level user interfaces for transfer function design with semantics.

PubMed

Salama, Christof Rezk; Keller, Maik; Kohlmann, Peter

2006-01-01

Many sophisticated techniques for the visualization of volumetric data such as medical data have been published. While existing techniques are mature from a technical point of view, managing the complexity of visual parameters is still difficult for non-expert users. To this end, this paper presents new ideas to facilitate the specification of optical properties for direct volume rendering. We introduce an additional level of abstraction for parametric models of transfer functions. The proposed framework allows visualization experts to design high-level transfer function models which can intuitively be used by non-expert users. The results are user interfaces which provide semantic information for specialized visualization problems. The proposed method is based on principal component analysis as well as on concepts borrowed from computer animation.

A Cross-Lingual Similarity Measure for Detecting Biomedical Term Translations

PubMed Central

Bollegala, Danushka; Kontonatsios, Georgios; Ananiadou, Sophia

2015-01-01

Bilingual dictionaries for technical terms such as biomedical terms are an important resource for machine translation systems as well as for humans who would like to understand a concept described in a foreign language. Often a biomedical term is first proposed in English and later it is manually translated to other languages. Despite the fact that there are large monolingual lexicons of biomedical terms, only a fraction of those term lexicons are translated to other languages. Manually compiling large-scale bilingual dictionaries for technical domains is a challenging task because it is difficult to find a sufficiently large number of bilingual experts. We propose a cross-lingual similarity measure for detecting most similar translation candidates for a biomedical term specified in one language (source) from another language (target). Specifically, a biomedical term in a language is represented using two types of features: (a) intrinsic features that consist of character n-grams extracted from the term under consideration, and (b) extrinsic features that consist of unigrams and bigrams extracted from the contextual windows surrounding the term under consideration. We propose a cross-lingual similarity measure using each of those feature types. First, to reduce the dimensionality of the feature space in each language, we propose prototype vector projection (PVP)—a non-negative lower-dimensional vector projection method. Second, we propose a method to learn a mapping between the feature spaces in the source and target language using partial least squares regression (PLSR). The proposed method requires only a small number of training instances to learn a cross-lingual similarity measure. The proposed PVP method outperforms popular dimensionality reduction methods such as the singular value decomposition (SVD) and non-negative matrix factorization (NMF) in a nearest neighbor prediction task. Moreover, our experimental results covering several language pairs such as English–French, English–Spanish, English–Greek, and English–Japanese show that the proposed method outperforms several other feature projection methods in biomedical term translation prediction tasks. PMID:26030738

Develop a Comprehensive Technical Training and Data Collection Program for Structural Welders and Fitters: Technical Proposal

DTIC Science & Technology

2006-05-30

implementation Final Report 4 TECHNICAL PLAN AND RESULTS Task 1: Initiate the Project Management System Two senior NGSS production management...1 Technical Plan and Results...Third the system is hosted on a handheld unit which provides the foremen with an efficient daily planning tool. The Pilot System which entails

A study on technical efficiency of a DMU (review of literature)

NASA Astrophysics Data System (ADS)

Venkateswarlu, B.; Mahaboob, B.; Subbarami Reddy, C.; Sankar, J. Ravi

2017-11-01

In this research paper the concept of technical efficiency (due to Farell) [1] of a decision making unit (DMU) has been introduced and the measure of technical and cost efficiencies are derived. Timmer’s [2] deterministic approach to estimate the Cobb-Douglas production frontier has been proposed. The idea of extension of Timmer’s [2] method to any production frontier which is linear in parameters has been presented here. The estimation of parameters of Cobb-Douglas production frontier by linear programming approach has been discussed in this paper. Mark et al. [3] proposed a non-parametric method to assess efficiency. Nuti et al. [4] investigated the relationships among technical efficiency scores, weighted per capita cost and overall performance Gahe Zing Samuel Yank et al. [5] used Data envelopment analysis to assess technical assessment in banking sectors.

76 FR 78062 - Self-Regulatory Organizations; NYSE Amex LLC; Notice of Filing and Immediate Effectiveness of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-15

... problem and make other technical changes. The proposed change will be operative on December 1, 2011. The... experiences a bona fide systems problem and make other technical changes. The Exchange presently has three... Exchange experienced a bona fide systems problem. The Exchange proposes to amend the Fee Schedule to extend...

77 FR 5616 - Proposed Technical Standard Order (TSO)-C151c, Terrain Awareness and Warning System (TAWS)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-03

... (TSO)-C151c, Terrain Awareness and Warning System (TAWS) ACTION: Notice of availability and request for... second draft of Technical Standard Order (TSO)- C151c, Terrain Awareness and Warning System. Comments received from the initial June 2011 release, resulted in changes to the proposed document significant...

15 CFR 295.6 - Criteria for selection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... proposal will be funded unless the Program determines that it has scientific and technological merit and... does not have an adequate technical and commercialization plan. (a) Scientific and technological merit... innovation, the technical approach, major technical hurdles, the attendant risks, and clearly establish...

NASA Engineering Excellence: A Case Study on Strengthening an Engineering Organization

NASA Technical Reports Server (NTRS)

Shivers, C. Herbert; Wessel, Vernon W.

2006-01-01

NASA implemented a system of technical authority following the Columbia Accident Investigation Board (CAE) report calling for independent technical authority to be exercised on the Space Shuttle Program activities via a virtual organization of personnel exercising specific technical authority responsibilities. After the current NASA Administrator reported for duty, and following the first of two planned "Shuttle Return to Flight" missions, the NASA Chief Engineer and the Administrator redirected the Independent Technical Authority to a program of Technical Excellence and Technical Authority exercised within the existing engineering organizations. This paper discusses the original implementation of technical authority and the transition to the new implementation of technical excellence, including specific measures aimed at improving safety of future Shuttle and space exploration flights.

Laboratory investigations

NASA Astrophysics Data System (ADS)

1984-09-01

The primary objectives were to examine the site-specific physical, chemical, and biological factors that impact construction, durability and performance of the proposed 5-MW (sub e) solar pond system at the Salton Sea. The interactions of the water, salt, and soil of the site and on material compatibility were examined. Potential interactions of the water/brine and soil are particularly important because the pond will utilize the naturally occurring clays as a bottom seal. Although there is a considerable and growing solar pond literature, little written information deals with the important site-specific investigations of water, salt, and soil. Therefore, technical effort was directed toward identifying the factors that should be investigated and determining methods of investigation. As a result, a by-product was the development of an approach for site-specific investigations and some specific methodologies. This development should continue in order to establish a generic approach for evaluating the suitability of any site for the construction of large-scale solar ponds.

Laboratory Investigations

NASA Technical Reports Server (NTRS)

1984-01-01

The primary objectives were to examine the site-specific physical, chemical, and biological factors that impact construction, durability and performance of the proposed 5-MW (sub e) solar pond system at the Salton Sea. The interactions of the water, salt, and soil of the site and on material compatibility were examined. Potential interactions of the water/brine and soil are particularly important because the pond will utilize the naturally occurring clays as a bottom seal. Although there is a considerable and growing solar pond literature, little written information deals with the important site-specific investigations of water, salt, and soil. Therefore, technical effort was directed toward identifying the factors that should be investigated and determining methods of investigation. As a result, a by-product was the development of an approach for site-specific investigations and some specific methodologies. This development should continue in order to establish a generic approach for evaluating the suitability of any site for the construction of large-scale solar ponds.

Multilingual space terminology data bank. updating, improvement and evolution

NASA Astrophysics Data System (ADS)

Bensaid, R.; Astor, J.-L.

2002-01-01

In the context of the work done by the French terminological space group, to update the IAA multilingual space terminological data bank and to define rules for future updates it is proposed in the first part, to add to the actual IAA basic list, a selection of six hundred more terms, proposed since 1993, in the different "papers" presented during the last three IAA multilingual astronautical terminology symposia. This selection will concern more specifically the terms related to astrodynamics, aerospace biology and medicine, earth observation and remote sensing, radiolocation and mobile communications. To improve the structure and the possible uses of the data bank it is proposed to divide the terms of the basic list into themes. In the second part a list of scientific and technical themes has been put forward for discussion. This list is compatible with the actual IAA scientific committees.

Using formal methods for content validation of medical procedure documents.

PubMed

Cota, Érika; Ribeiro, Leila; Bezerra, Jonas Santos; Costa, Andrei; da Silva, Rosiana Estefane; Cota, Gláucia

2017-08-01

We propose the use of a formal approach to support content validation of a standard operating procedure (SOP) for a therapeutic intervention. Such an approach provides a useful tool to identify ambiguities, omissions and inconsistencies, and improves the applicability and efficacy of documents in the health settings. We apply and evaluate a methodology originally proposed for the verification of software specification documents to a specific SOP. The verification methodology uses the graph formalism to model the document. Semi-automatic analysis identifies possible problems in the model and in the original document. The verification is an iterative process that identifies possible faults in the original text that should be revised by its authors and/or specialists. The proposed method was able to identify 23 possible issues in the original document (ambiguities, omissions, redundant information, and inaccuracies, among others). The formal verification process aided the specialists to consider a wider range of usage scenarios and to identify which instructions form the kernel of the proposed SOP and which ones represent additional or required knowledge that are mandatory for the correct application of the medical document. By using the proposed verification process, a simpler and yet more complete SOP could be produced. As consequence, during the validation process the experts received a more mature document and could focus on the technical aspects of the procedure itself. Copyright © 2017 Elsevier B.V. All rights reserved.

78 FR 65695 - 30-Day Notice of Proposed Information Collection: Technical Processing Requirements for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... Information Collection: Technical Processing Requirements for Multifamily Project Mortgage Insurance AGENCY: Office of the Chief Information Officer, HUD. ACTION: Correction, notice. SUMMARY: On October 25, 2013 at... Collection Title of Information Collection: Technical Processing Requirements for Multifamily Project...

77 FR 60140 - Notice of Proposed Information Collection; Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-02

... renewed approval for the collection of information for two technical training program course effectiveness... of information contained in two technical training program course effectiveness evaluation forms. OSM... days in which to comment on the following information collection activities: Title: Technical Training...

48 CFR 715.303-70 - Responsibilities of USAID evaluation committees.

Code of Federal Regulations, 2010 CFR

2010-10-01

... evaluation committees. A technical evaluation committee shall be established for each proposed procurement. In each case, the committee shall be composed of a chair representing the cognizant technical office... representatives from other concerned offices as appropriate. (b) Technical evaluation procedures. (1) The...

48 CFR 315.305 - Proposal evaluation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... following elements: (1) An explanation of the evaluation process and the role of evaluators throughout the... include, at a minimum, the following elements: (1) A list of recommended technical evaluation panel... that the technical evaluation will have in the award decision. (2) The technical evaluation process...

75 FR 13209 - Proposed Information Collection (Technical Industry Standards) Activity: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

... (Technical Industry Standards) Activity: Comment Request AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires items offered for...

75 FR 12740 - Wyoming Interstate Company, Inc.; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-17

... additional technical, engineering, and operational support for its proposed gas quality allocation procedures... should be prepared to support its position with adequate technical, engineering, and operational information. FERC conferences are accessible under section 508 of the Rehabilitation Act of 1973. For...

Technical Support Document for Version 3.6.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2009-09-29

This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

Simulation for transthoracic echocardiography of aortic valve

PubMed Central

Nanda, Navin C.; Kapur, K. K.; Kapoor, Poonam Malhotra

2016-01-01

Simulation allows interactive transthoracic echocardiography (TTE) learning using a virtual three-dimensional model of the heart and may aid in the acquisition of the cognitive and technical skills needed to perform TTE. The ability to link probe manipulation, cardiac anatomy, and echocardiographic images using a simulator has been shown to be an effective model for training anesthesiology residents in transesophageal echocardiography. A proposed alternative to real-time reality patient-based learning is simulation-based training that allows anesthesiologists to learn complex concepts and procedures, especially for specific structures such as aortic valve. PMID:27397455

Technical Assistance to Brownfields Communities

EPA Pesticide Factsheets

This notice announces the availability of funds and solicits proposals from eligible entities (including eligible non-profit organizations) to provide technical assistance to communities on brownfields issues.

SINERGIA laparoscopic virtual reality simulator: didactic design and technical development.

PubMed

Lamata, Pablo; Gómez, Enrique J; Sánchez-Margallo, Francisco M; López, Oscar; Monserrat, Carlos; García, Verónica; Alberola, Carlos; Florido, Miguel Angel Rodríguez; Ruiz, Juan; Usón, Jesús

2007-03-01

VR laparoscopic simulators have demonstrated its validity in recent studies, and research should be directed towards a high training effectiveness and efficacy. In this direction, an insight into simulators' didactic design and technical development is provided, by describing the methodology followed in the building of the SINERGIA simulator. It departs from a clear analysis of training needs driven by a surgical training curriculum. Existing solutions and validation studies are an important reference for the definition of specifications, which are described with a suitable use of simulation technologies. Five new didactic exercises are proposed to train some of the basic laparoscopic skills. Simulator construction has required existing algorithms and the development of a particle-based biomechanical model, called PARSYS, and a collision handling solution based in a multi-point strategy. The resulting VR laparoscopic simulator includes new exercises and enhanced simulation technologies, and is finding a very good acceptance among surgeons.

Site-Specific Analyses for Demonstrating Compliance with 10 CFR 61 Performance Objectives - 12179

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grossman, C.J.; Esh, D.W.; Yadav, P.

2012-07-01

The U.S. Nuclear Regulatory Commission (NRC) is proposing to amend its regulations at 10 CFR Part 61 to require low-level radioactive waste disposal facilities to conduct site-specific analyses to demonstrate compliance with the performance objectives in Subpart C. The amendments would require licensees to conduct site-specific analyses for protection of the public and inadvertent intruders as well as analyses for long-lived waste. The amendments would ensure protection of public health and safety, while providing flexibility to demonstrate compliance with the performance objectives, for current and potential future waste streams. NRC staff intends to submit proposed rule language and associated regulatorymore » basis to the Commission for its approval in early 2012. The NRC staff also intends to develop associated guidance to accompany any proposed amendments. The guidance is intended to supplement existing low-level radioactive waste guidance on issues pertinent to conducting site-specific analyses to demonstrate compliance with the performance objectives. The guidance will facilitate implementation of the proposed amendments by licensees and assist competent regulatory authorities in reviewing the site-specific analyses. Specifically, the guidance provides staff recommendations on general considerations for the site-specific analyses, modeling issues for assessments to demonstrate compliance with the performance objectives including the performance assessment, intruder assessment, stability assessment, and analyses for long-lived waste. This paper describes the technical basis for changes to the rule language and the proposed guidance associated with implementation of the rule language. The NRC staff, per Commission direction, intends to propose amendments to 10 CFR Part 61 to require licensees to conduct site-specific analyses to demonstrate compliance with performance objectives for the protection of public health and the environment. The amendments would require a performance assessment to demonstrate protection of the general population from releases of radioactivity, an assessment to demonstrate protection of a potential inadvertent intruder, and a long-term analysis to assess how the design of the facility considers the potential radiological impacts associated with disposal of long-lived waste streams. Concurrently, the NRC staff intends to propose associated guidance to facilitate the implementation of the requirements to conduct site-specific analyses. In proposing these amendments to the regulation and associated guidance, the NRC staff has conducted extensive public outreach since 2009 including three public meetings and four briefings of the NRC's Advisory Committee on Reactor Safeguards. The NRC staff plans to submit the proposed amendments to the regulations to the Commission in early 2012. Subsequently, the proposed amendments and associated guidance would be published in the Federal Register for public comment pending approval of the proposed amendments to the regulations by the Commission. Following the public comment period, NRC staff plans to address public comments and revise, as necessary, the regulations and associated guidance before publishing a final rule, which is anticipated in 2013. (authors)« less

Operator Performance Support System (OPSS)

DTIC Science & Technology

1992-02-01

both the military and the industry. The OPSS will propose practical application’ in how to more closely align the relationships between technical...industry. The OPSS will propose practical applications in how to more closely align the relationships between technical knowledge and equipment operator...commercial programs provide flexibility to suppori existing and futurc kourscware and "hardware enhancements. In the development process of the OPSS

Preliminary Assessment of the Proposed Closure of the National Technical Information Service (NTIS): A Report to the President and the Congress.

ERIC Educational Resources Information Center

Horton, Forest Woody, Ed.; Kadec, Sarah T., Ed.

This document reports on an NCLIS (National Commission on Libraries and Information Science) study of the proposal to close NTIS (National Technical Information Service) and shift its paper, microfiche, digital archives, and bibliographic database to the Library of Congress. The report documents the results of research, interviews, public…

Storyboarding: A Concrete Way to Generate Effective Visuals.

ERIC Educational Resources Information Center

Larkin, Greg

1996-01-01

Advances the idea that storyboarding, long associated with scriptwriting, advertising, and more recently with technical manuals, can be successfully applied to an even broader variety of technical documents. Applies storyboarding techniques to designing technical proposals to suggest methods of incorporating more visuals into documents, as well as…

76 FR 9607 - Notice of Proposed Information Collection for Technical Evaluation Surveys

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-18

... Information Collection for Technical Evaluation Surveys AGENCY: Office of Surface Mining Reclamation and... information collection request for its Technical Evaluation customer surveys has been forwarded to the Office of Management and Budget (OMB) for review and comment. The information collection request describes...

10 CFR 52.80 - Contents of applications; additional technical information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Contents of applications; additional technical information... APPROVALS FOR NUCLEAR POWER PLANTS Combined Licenses § 52.80 Contents of applications; additional technical information. The application must contain: (a) The proposed inspections, tests, and analyses, including those...

Tag-to-Tag Interference Suppression Technique Based on Time Division for RFID.

PubMed

Khadka, Grishma; Hwang, Suk-Seung

2017-01-01

Radio-frequency identification (RFID) is a tracking technology that enables immediate automatic object identification and rapid data sharing for a wide variety of modern applications using radio waves for data transmission from a tag to a reader. RFID is already well established in technical areas, and many companies have developed corresponding standards and measurement techniques. In the construction industry, effective monitoring of materials and equipment is an important task, and RFID helps to improve monitoring and controlling capabilities, in addition to enabling automation for construction projects. However, on construction sites, there are many tagged objects and multiple RFID tags that may interfere with each other's communications. This reduces the reliability and efficiency of the RFID system. In this paper, we propose an anti-collision algorithm for communication between multiple tags and a reader. In order to suppress interference signals from multiple neighboring tags, the proposed algorithm employs the time-division (TD) technique, where tags in the interrogation zone are assigned a specific time slot so that at every instance in time, a reader communicates with tags using the specific time slot. We present representative computer simulation examples to illustrate the performance of the proposed anti-collision technique for multiple RFID tags.

[Priority research agendas: a strategic resource for health in Latin America].

PubMed

Becerra-Posada, Francisco; de Snyder, Nelly Salgado; Cuervo, Luis Gabriel; Montorzi, Gabriela

2014-12-01

Understand and analyze procedures used to create national integrated research agendas from 2007 to 2011 in Argentina, Guatemala, Mexico, Panama, and Paraguay. Descriptive, cross-sectional study using an online survey of agenda preparation processes; specifically, development, integration, implementation, and use and dissemination of the agenda. The 45 respondents reported following specific methodologies for agenda construction and had a good opinion of organizational aspects with regard to prior information provided and balance among disciplines and stakeholders. Some 60% considered the coordinators impartial, although 25% mentioned biases favoring some subject; 42% received technical support from consultants, reading matter, and methodological guidelines; 40% engaged in subject-matter priority-setting; and 55% confirmed dissemination and communication of the agenda. However, only 22% reported inclusion of agenda topics in national calls for research proposals. In the countries studied, development of the health research agenda was characterized by prior planning and appropriate organization to achieve - consensus-based outcomes. Nevertheless, the agendas were not used in national calls for research proposals, reflecting lack of coordination in national health research systems and lack of connection between funders and researchers. It is recommended that stakeholders strengthen integration and advocacy efforts to modify processes and structures of agenda-based calls for research proposals.

Concept Systems and Ontologies: Recommendations for Basic Terminology

NASA Astrophysics Data System (ADS)

Klein, Gunnar O.; Smith, Barry

This essay concerns the problems surrounding the use of the term ``concept'' in current ontology and terminology research. It is based on the constructive dialogue between realist ontology on the one hand and the world of formal standardization of health informatics on the other, but its conclusions are not restricted to the domain of medicine. The term ``concept'' is one of the most misused even in literature and technical standards which attempt to bring clarity. In this paper we propose to use the term ``concept'' in the context of producing defined professional terminologies with one specific and consistent meaning which we propose for adoption as the agreed meaning of the term in future terminological research, and specifically in the development of formal terminologies to be used in computer systems. We also discuss and propose new definitions of a set of cognate terms. We describe the relations governing the realm of concepts, and compare these to the richer and more complex set of relations obtaining between entities in the real world. On this basis we also summarize an associated terminology for ontologies as representations of the real world and a partial mapping between the world of concepts and the world of reality.

76 FR 66763 - Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-510...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-27

... of Technical Specifications Task Force Traveler TSTF-510, Revision 2, ``Revision to Steam Generator..., Revision 2, ``Revision to Steam Generator [(SG)] Program Inspection Frequencies and Tube Sample Selection..., ``Steam Generator (SG) Program,'' Specification 5.6.7, ``Steam Generator Tube Inspection Report,'' and the...

76 FR 50276 - STP Nuclear Operating Company, South Texas Project, Units 1 and 2; Notice of Withdrawal of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-12

... revised the application of Risk- Managed Technical Specifications to Technical Specification 3.7.7, ``Control Room Makeup and Cleanup Filtration System.'' The purpose of the change was to correct a misapplication of the Configuration Risk Management Program that is currently allowed by the Technical...

Using Niche-Market Magazines to Teach Audience

ERIC Educational Resources Information Center

Tichenor, Stuart

2006-01-01

In technical writing classes, audience is one of the most important concepts. Technical writing is typically written to a specific audience for a specific purpose. In addition, as audiences change, so must the way a document is written. An audience's lack of knowledge in a technical area, for example, would require more background information or…

48 CFR 227.7102-2 - Rights in technical data.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Rights in technical data... Technical Data 227.7102-2 Rights in technical data. (a) The clause at 252.227-7015, Technical Data—Commercial Items, provides the Government specific license rights in technical data pertaining to commercial...

[Ecological and economic approaches to removing radioactively dangerous objects from service].

PubMed

Korenkov, I P; Lashchenova, T N; Neveĭkin, P P; Shandala, N K; Veselov, E I; Maksimova, O A

2011-01-01

The paper considers major ecological and economic problems when removing radiation dangerous objects from service and rehabilitating the areas, which require their solution: the absence of specific guidelines for ranking the contaminated lands exposed to radioactive and chemical pollution from the potential risk to the population and environment; no clear criteria for ceasing area rehabilitation works; radiation exposure levels for the population living in the areas after rehabilitation; allowable levels of residual specific activity, and levels of heavy metals in soil, surface and underground water and bed sediment. The cost such works is the most important and decisive problem. A decision-making algorithm consisting of three main blocks: organizational-technical, engineering, geological and medicoecological measures is proposed to solve managerial, economic, and scientific problems.

An Organization's Extended (Soft) Competencies Model

NASA Astrophysics Data System (ADS)

Rosas, João; Macedo, Patrícia; Camarinha-Matos, Luis M.

One of the steps usually undertaken in partnerships formation is the assessment of organizations’ competencies. Typically considered competencies of a functional or technical nature, which provide specific outcomes can be considered as hard competencies. Yet, the very act of collaboration has its specific requirements, for which the involved organizations must be apt to exercise other type of competencies that affect their own performance and the partnership success. These competencies are more of a behavioral nature, and can be named as soft-competencies. This research aims at addressing the effects of the soft competencies on the performance of the hard ones. An extended competencies model is thus proposed, allowing the construction of adjusted competencies profiles, in which the competency levels are adjusted dynamically according to the requirements of collaboration opportunities.

77 FR 73673 - Notice of Proposed Information Collection; Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-11

... to request approval to continue the collection of information for one of its Technical Training... approval. This collection is for the OSM Technical Training Nomination and Request for Payment Form (OSM.... Title: Nomination and Request for Payment Form for OSM Technical Training Courses. OMB Control Number...

78 FR 51210 - Agency Information Collection Activities; Proposed Collection; Comments Requested: Office for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-20

... Technical Assistance Center (OVC TTAC) Online Trainings Package ACTION: 30-day notice. The Department of...: The Office for Victims of Crime Training and Technical Assistance Center (OVC TTAC) Online Trainings... online training and technical assistance and, in some cases, to online instructors or participants...

78 FR 36578 - Agency Information Collection Activities; Proposed Collection; Comments Requested: Office for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-18

... Collection; Comments Requested: Office for Victims of Crime Training and Technical Assistance Center (OVC...; Businesses or other for-profit. Abstract: The Office for Victims of Crime Training and Technical Assistance... will deliver these forms to recipients of online training and technical assistance and, in some cases...

75 FR 5801 - Notice of Proposed Information Collection for 1029-0120

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-04

... request for its Nomination and Request for Payment Form for OSM Technical Training Courses, has been... Nomination and Request for Payment Form for OSM Technical Training Courses. OSM is requesting a 3- year term... information collection activity: Title: Nomination and Request for Payment Form for OSM Technical Training...

78 FR 11947 - 60-Day Notice of Proposed Information Collection: Directorate of Defense Trade Controls...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-20

...: Directorate of Defense Trade Controls Information Collection: Export Declaration of Defense Technical Data or... . SUPPLEMENTARY INFORMATION: Title of Information Collection: Export Declaration of Defense Technical Data or... collection: Actual export of defense technical data and defense services must be reported directly to the...

48 CFR 315.306 - Exchanges with offerors after receipt of proposals.

Code of Federal Regulations, 2010 CFR

2010-10-01

... establishment of the competitive range. The Project Officer or technical evaluation panel shall develop technical questions as part of the technical evaluation report. The questions shall disclose the ambiguities... practicable, all questions and answers shall be in writing. The Contracting Officer shall give each offeror in...

75 FR 27552 - Credit Reforms in Organized Wholesale Electric Markets; Further Notice Concerning Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-17

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RM10-13-000] Credit Reforms in Organized Wholesale Electric Markets; Further Notice Concerning Technical Conference May 10, 2010... technical conference related to the Commission's Notice of Proposed Rulemaking on Credit Reforms in...

Towards technical interoperability in telemedicine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craft, Richard Layne, II

2004-05-01

For telemedicine to realize the vision of anywhere, anytime access to care, the question of how to create a fully interoperable technical infrastructure must be addressed. After briefly discussing how 'technical interoperability' compares with other types of interoperability being addressed in the telemedicine community today, this paper describes reasons for pursuing technical interoperability, presents a proposed framework for realizing technical interoperability, identifies key issues that will need to be addressed if technical interoperability is to be achieved, and suggests a course of action that the telemedicine community might follow to accomplish this goal.

7 CFR 802.0 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-01-01

... requirements set forth in this part 802 describe certain specifications, tolerances, and other technical... Standards and Technology (NIST) Handbook 44, “Specifications, Tolerances, and Other Technical Requirements...), “Specifications and Tolerances for Reference Standards and Field Standard Weights and Measures,” (Handbook 105-1...

Technical Assistance To Tribal Communities Addressing Brownfields

EPA Pesticide Factsheets

This notice announces the availability of funds and solicits proposals from eligible entities (including eligible nonprofit organizations) to provide technical assistance to tribal communities on brownfield related issues.

Privacy Protection through pseudonymisation in eHealth.

PubMed

De Meyer, F; De Moor, G; Reed-Fourquet, L

2008-01-01

The ISO TC215 WG4 pseudonymisation task group has produced in 2008 a first version of a technical specification for the application of pseudonymisation in Healthcare Informatics 0. This paper investigates the principles set out in the technical specification as well as its implications in eHealth. The technical specification starts out with a conceptual model and evolves from a theoretical model to a real life model by adding assumptions on the observability of personal data.

Technical communication. Perspectives for the Eighties, part 2

NASA Technical Reports Server (NTRS)

Mathes, J. C. (Compiler); Pinelli, T. E. (Compiler)

1981-01-01

The importance of technical writing as a separate discipline is suggested. Some specific areas addressed were: technical writing skills industry needs, definitions of technical writing, the hows and whys of inhouse writing, and the nature of the composing process in technical comunication.

Context-specific energy strategies: coupling energy system visions with feasible implementation scenarios.

PubMed

Trutnevyte, Evelina; Stauffacher, Michael; Schlegel, Matthias; Scholz, Roland W

2012-09-04

Conventional energy strategy defines an energy system vision (the goal), energy scenarios with technical choices and an implementation mechanism (such as economic incentives). Due to the lead of a generic vision, when applied in a specific regional context, such a strategy can deviate from the optimal one with, for instance, the lowest environmental impacts. This paper proposes an approach for developing energy strategies by simultaneously, rather than sequentially, combining multiple energy system visions and technically feasible, cost-effective energy scenarios that meet environmental constraints at a given place. The approach is illustrated by developing a residential heat supply strategy for a Swiss region. In the analyzed case, urban municipalities should focus on reducing heat demand, and rural municipalities should focus on harvesting local energy sources, primarily wood. Solar thermal units are cost-competitive in all municipalities, and their deployment should be fostered by information campaigns. Heat pumps and building refurbishment are not competitive; thus, economic incentives are essential, especially for urban municipalities. In rural municipalities, wood is cost-competitive, and community-based initiatives are likely to be most successful. Thus, the paper shows that energy strategies should be spatially differentiated. The suggested approach can be transferred to other regions and spatial scales.

The prediction of the residual life of electromechanical equipment based on the artificial neural network

NASA Astrophysics Data System (ADS)

Zhukovskiy, Yu L.; Korolev, N. A.; Babanova, I. S.; Boikov, A. V.

2017-10-01

This article is devoted to the prediction of the residual life based on an estimate of the technical state of the induction motor. The proposed system allows to increase the accuracy and completeness of diagnostics by using an artificial neural network (ANN), and also identify and predict faulty states of an electrical equipment in dynamics. The results of the proposed system for estimation the technical condition are probability technical state diagrams and a quantitative evaluation of the residual life, taking into account electrical, vibrational, indirect parameters and detected defects. Based on the evaluation of the technical condition and the prediction of the residual life, a decision is made to change the control of the operating and maintenance modes of the electric motors.

76 FR 19510 - Notice of Availability (NOA) of the Models For Plant-Specific Adoption of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-07

...-Specific Adoption of Technical Specifications Task Force (TSTF) Traveler TSTF- 422, Revision 2, ``Change In... model safety evaluation (SE) for plant-specific adoption of TSTF Traveler TSTF-422, Revision 2, ``Change..., Revision 2, is available in the Agencywide Documents Access and Management System (ADAMS) under Accession...

Using Competency-Based Digital Open Learning Activities to Facilitate and Promote Health Professions Education (OLAmeD): A Proposal

PubMed Central

Barman, Linda

2016-01-01

Background Traditional learning in medical education has been transformed with the advent of information technology. We have recently seen global initiatives to produce online activities in an effort to scale up learning opportunities through learning management systems and massive open online courses for both undergraduate and continued professional education. Despite the positive impact of such efforts, factors such as cost, time, resources, and the specificity of educational contexts restrict the design and exchange of online medical educational activities. Objective The goal is to address the stated issues within the health professions education context while promoting learning by proposing the Online Learning Activities for Medical Education (OLAmeD) concept which builds on unified competency frameworks and generic technical standards for education. Methods We outline how frameworks used to describe a set of competencies for a specific topic in medical education across medical schools in the United States and Europe can be compared to identify commonalities that could result in a unified set of competencies representing both contexts adequately. Further, we examine how technical standards could be used to allow standardization, seamless sharing, and reusability of educational content. Results The entire process of developing and sharing OLAmeD is structured and presented in a set of steps using as example Urology as a part of clinical surgery specialization. Conclusions Beyond supporting the development, sharing, and repurposing of educational content, we expect OLAmeD to work as a tool that promotes learning and sets a base for a community of medical educational content developers across different educational contexts. PMID:27390226

Using Competency-Based Digital Open Learning Activities to Facilitate and Promote Health Professions Education (OLAmeD): A Proposal.

PubMed

Vaitsis, Christos; Stathakarou, Natalia; Barman, Linda; Zary, Nabil; McGrath, Cormac

2016-07-07

Traditional learning in medical education has been transformed with the advent of information technology. We have recently seen global initiatives to produce online activities in an effort to scale up learning opportunities through learning management systems and massive open online courses for both undergraduate and continued professional education. Despite the positive impact of such efforts, factors such as cost, time, resources, and the specificity of educational contexts restrict the design and exchange of online medical educational activities. The goal is to address the stated issues within the health professions education context while promoting learning by proposing the Online Learning Activities for Medical Education (OLAmeD) concept which builds on unified competency frameworks and generic technical standards for education. We outline how frameworks used to describe a set of competencies for a specific topic in medical education across medical schools in the United States and Europe can be compared to identify commonalities that could result in a unified set of competencies representing both contexts adequately. Further, we examine how technical standards could be used to allow standardization, seamless sharing, and reusability of educational content. The entire process of developing and sharing OLAmeD is structured and presented in a set of steps using as example Urology as a part of clinical surgery specialization. Beyond supporting the development, sharing, and repurposing of educational content, we expect OLAmeD to work as a tool that promotes learning and sets a base for a community of medical educational content developers across different educational contexts.

Brownfields Green Avenue Sites: Technical Memorandum - Conceptual Design for Sustainable Redevelopment

EPA Pesticide Factsheets

This technical memorandum briefly describes the site and proposed conceptual site plan, indicates conceptual design considerations, specifies recommended green and sustainable features, and offers other recommendations

Initial Risk Analysis and Decision Making Framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engel, David W.

2012-02-01

Commercialization of new carbon capture simulation initiative (CCSI) technology will include two key elements of risk management, namely, technical risk (will process and plant performance be effective, safe, and reliable) and enterprise risk (can project losses and costs be controlled within the constraints of market demand to maintain profitability and investor confidence). Both of these elements of risk are incorporated into the risk analysis subtask of Task 7. Thus far, this subtask has developed a prototype demonstration tool that quantifies risk based on the expected profitability of expenditures when retrofitting carbon capture technology on a stylized 650 MW pulverized coalmore » electric power generator. The prototype is based on the selection of specific technical and financial factors believed to be important determinants of the expected profitability of carbon capture, subject to uncertainty. The uncertainty surrounding the technical performance and financial variables selected thus far is propagated in a model that calculates the expected profitability of investments in carbon capture and measures risk in terms of variability in expected net returns from these investments. Given the preliminary nature of the results of this prototype, additional work is required to expand the scope of the model to include additional risk factors, additional information on extant and proposed risk factors, the results of a qualitative risk factor elicitation process, and feedback from utilities and other interested parties involved in the carbon capture project. Additional information on proposed distributions of these risk factors will be integrated into a commercial implementation framework for the purpose of a comparative technology investment analysis.« less

Benchmarking Equity in Transfer Policies for Career and Technical Associate's Degrees

ERIC Educational Resources Information Center

Chase, Megan M.

2011-01-01

Using critical policy analysis, this study considers state policies that impede technical credit transfer from public 2-year colleges to 4-year institutions of higher education. The states of Ohio, Texas, Washington, and Wisconsin are considered, and seven policy benchmarks for facilitating the transfer of technical credits are proposed. (Contains…

75 FR 26749 - Public Utility District No.1 of Snohomish County, WA; Notice of Technical Conference for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-12

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 2157-188] Public Utility District No.1 of Snohomish County, WA; Notice of Technical Conference for the Jackson Hydroelectric Project.... Commission staff will hold a technical conference to discuss the proposed license articles submitted by the...

76 FR 14835 - Approval and Promulgation of Air Quality Implementation Plan; Missouri; Proposed Disapproval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... the state's conclusion should be supported by an adequate technical analysis. EPA recommended the...)(2)(D)(i)(I) must be supported by an adequate technical analysis.\\5\\ EPA recommended the various..., the state did not further evaluate or demonstrate with a technical analysis that these measures...

76 FR 14831 - Approval and Promulgation of Air Quality Implementation Plan; Kansas; Proposed Disapproval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... State's conclusion should be supported by an adequate technical analysis. EPA recommended the various...) must be supported by an adequate technical analysis.\\5\\ EPA recommended the various types of... evaluate or demonstrate with a technical analysis that these measures address the requirements of 110(a)(2...

76 FR 43159 - Approval and Promulgation of Air Quality Implementation Plan; Georgia; Disapproval of Interstate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

... stated that the state's conclusion should be supported by an adequate technical analysis. Second, EPA...'' provisions, the state's SIP revision must be supported by an adequate technical analysis, including, but not..., proposed disapproval where the Agency states: ``* * * without an adequate technical analysis EPA does not...

78 FR 12782 - Notice of Proposed Information Collection; Request for Comments for 1029-0120

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-25

... information collection request for the Nomination and Request for Payment Form for OSM's Technical Training... Payment Form for OSM Technical Training Courses. OSM is requesting a 3-year term of approval for this... collection activity: Title: Nomination and Request for Payment Form for OSM Technical Training Courses. OMB...

Quality Concerns in Technical Education in India: A Quantifiable Quality Enabled Model

ERIC Educational Resources Information Center

Gambhir, Victor; Wadhwa, N. C.; Grover, Sandeep

2016-01-01

Purpose: The paper aims to discuss current Technical Education scenarios in India. It proposes modelling the factors affecting quality in a technical institute and then applying a suitable technique for assessment, comparison and ranking. Design/methodology/approach: The paper chose graph theoretic approach for quantification of quality-enabled…

78 FR 36012 - 30-Day Notice of Proposed Information Collection: Export Declaration of Defense Technical Data or...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-14

... your message. Fax: 202-395-5806. Attention: Desk Officer for Department of State. FOR FURTHER... and brokering of defense articles, defense services and related technical data are licensed by the... the business of manufacturing or exporting defense articles, defense services, and related technical...

A Study on the Impact of Collective Feedback in the Online Technical and Professional Communication Classroom

ERIC Educational Resources Information Center

Singleton, Meredith

2016-01-01

This dissertation study seeks to determine whether feedback in the online Technical and Professional Communication classroom impacts student performance. This dissertation proposes that online Technical and Professional Communication instructors consider adopt such a feedback methodology in order to engage students with writing practices that…

The Technical Baccalaureate: Providing Excellence in Vocational Education?

ERIC Educational Resources Information Center

Acquah, Daniel K.; Malpass, Debra

2017-01-01

Proposals for a technical baccalaureate have received cross-party support in England. The technical baccalaureate is intended to deliver the necessary training to enable young people to fill the UK's skills gap in intermediate-level occupations in STEM and other sectors. This paper explores how to design and implement a high-quality technical…

Collaborating for Success: Team Teaching the Engineering Technical Thesis

ERIC Educational Resources Information Center

Keating, Terrence; Long, Mike

2012-01-01

This paper will examine the collaborative teaching process undertaken at College of the North Atlantic-Qatar (CNA-Q) by Engineering and the Communication faculties to improve the overall quality of engineering students' capstone projects known as the Technical Thesis. The Technical Thesis is divided into two separate components: a proposal stage…

10 CFR 601.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

78 FR 22367 - Proposed Information Collection (Service Data Manual) Activity: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-15

... technical medical equipment and devices or mechanical equipment. DATES: Written comments and recommendations... manuals and maintenance/repair manuals when technical medical equipment and devices, or mechanical...

Study on feasible technical potential of coal to electricity in china

NASA Astrophysics Data System (ADS)

Jia, Dexiang; Tan, Xiandong

2017-01-01

The control of bulk coal is one of the important work of air pollution control in China’s future. Existing research mainly focuses on the adaptability, economy, construction and renovation plan, and operation optimization of specific energy substitution utilization, and lacks the strategy research of long-term layout of energy substitution utilization in large area. This paper puts forward a technical potential prediction method of coal to electricity based on the thermal equivalent method, which is based on the characteristics of regional coal consumption, and combined with the trend of adaptability and economy of energy substitution utilization. Also, the paper calculates the comprehensive benefit of coal to electricity according to the varieties of energy consumption and pollutant emission level of unit energy consumption in China’s future. The research result shows that the development technical potential of coal to electricity in China is huge, about 1.8 trillion kWh, including distributed electric heating, heat pump and electric heating boiler, mainly located in North China, East China, and Northeast China. The implementation of coal to electricity has remarkable comprehensive benefits in energy conservation and emission reduction, and improvement of energy consumption safety level. Case study shows the rationality of the proposed method.

Implementation and Integration of Regional Health Care Data Networks in the Hellenic National Health Service

PubMed Central

Vidalis, Ioannis; Papanikolaou, Christos; Vagelatos, Aristides

2002-01-01

Background Modern health care is provided with close cooperation among many different institutions and professionals, using their specialized expertise in a common effort to deliver best-quality and, at the same time, cost-effective services. Within this context of the growing need for information exchange, the demand for realization of data networks interconnecting various health care institutions at a regional level, as well as a national level, has become a practical necessity. Objectives To present the technical solution that is under consideration for implementing and interconnecting regional health care data networks in the Hellenic National Health System. Methods The most critical requirements for deploying such a regional health care data network were identified as: fast implementation, security, quality of service, availability, performance, and technical support. Results The solution proposed is the use of proper virtual private network technologies for implementing functionally-interconnected regional health care data networks. Conclusions The regional health care data network is considered to be a critical infrastructure for further development and penetration of information and communication technologies in the Hellenic National Health System. Therefore, a technical approach was planned, in order to have a fast cost-effective implementation, conforming to certain specifications. PMID:12554551

Implementation and integration of regional health care data networks in the Hellenic National Health Service.

PubMed

Lampsas, Petros; Vidalis, Ioannis; Papanikolaou, Christos; Vagelatos, Aristides

2002-12-01

Modern health care is provided with close cooperation among many different institutions and professionals, using their specialized expertise in a common effort to deliver best-quality and, at the same time, cost-effective services. Within this context of the growing need for information exchange, the demand for realization of data networks interconnecting various health care institutions at a regional level, as well as a national level, has become a practical necessity. To present the technical solution that is under consideration for implementing and interconnecting regional health care data networks in the Hellenic National Health System. The most critical requirements for deploying such a regional health care data network were identified as: fast implementation, security, quality of service, availability, performance, and technical support. The solution proposed is the use of proper virtual private network technologies for implementing functionally-interconnected regional health care data networks. The regional health care data network is considered to be a critical infrastructure for further development and penetration of information and communication technologies in the Hellenic National Health System. Therefore, a technical approach was planned, in order to have a fast cost-effective implementation, conforming to certain specifications.

A Meta-Analysis of Motivational Interviewing Process: Technical, Relational, and Conditional Process Models of Change

PubMed Central

Magill, Molly; Apodaca, Timothy R.; Borsari, Brian; Gaume, Jacques; Hoadley, Ariel; Gordon, Rebecca E.F.; Tonigan, J. Scott; Moyers, Theresa

2018-01-01

Objective In the present meta-analysis, we test the technical and relational hypotheses of Motivational Interviewing (MI) efficacy. We also propose an a priori conditional process model where heterogeneity of technical path effect sizes should be explained by interpersonal/relational (i.e., empathy, MI Spirit) and intrapersonal (i.e., client treatment seeking status) moderators. Method A systematic review identified k = 58 reports, describing 36 primary studies and 40 effect sizes (N = 3025 participants). Statistical methods calculated the inverse variance-weighted pooled correlation coefficient for the therapist to client and the client to outcome paths across multiple target behaviors (i.e., alcohol use, other drug use, other behavior change). Results Therapist MI-consistent skills were correlated with more client change talk (r = .55, p < .001) as well as more sustain talk (r = .40, p < .001). MI-inconsistent skills were correlated with more sustain talk (r = .16, p < .001), but not change talk. When these indicators were combined into proportions, as recommended in the Motivational Interviewing Skill Code, the overall technical hypothesis was supported. Specifically, proportion MI consistency was related to higher proportion change talk (r = .11, p = .004) and higher proportion change talk was related to reductions in risk behavior at follow up (r = −.16, p < .001). When tested as two independent effects, client change talk was not significant, but sustain talk was positively associated with worse outcome (r = .19, p < .001). Finally, the relational hypothesis was not supported, but heterogeneity in technical hypothesis path effect sizes was partially explained by inter- and intra-personal moderators. Conclusions This meta-analysis provides additional support for the technical hypothesis of MI efficacy; future research on the relational hypothesis should occur in the field rather than in the context of clinical trials. PMID:29265832

A meta-analysis of motivational interviewing process: Technical, relational, and conditional process models of change.

PubMed

Magill, Molly; Apodaca, Timothy R; Borsari, Brian; Gaume, Jacques; Hoadley, Ariel; Gordon, Rebecca E F; Tonigan, J Scott; Moyers, Theresa

2018-02-01

In the present meta-analysis, we test the technical and relational hypotheses of Motivational Interviewing (MI) efficacy. We also propose an a priori conditional process model where heterogeneity of technical path effect sizes should be explained by interpersonal/relational (i.e., empathy, MI Spirit) and intrapersonal (i.e., client treatment seeking status) moderators. A systematic review identified k = 58 reports, describing 36 primary studies and 40 effect sizes (N = 3,025 participants). Statistical methods calculated the inverse variance-weighted pooled correlation coefficient for the therapist to client and the client to outcome paths across multiple target behaviors (i.e., alcohol use, other drug use, other behavior change). Therapist MI-consistent skills were correlated with more client change talk (r = .55, p < .001) as well as more sustain talk (r = .40, p < .001). MI-inconsistent skills were correlated with more sustain talk (r = .16, p < .001), but not change talk. When these indicators were combined into proportions, as recommended in the Motivational Interviewing Skill Code, the overall technical hypothesis was supported. Specifically, proportion MI consistency was related to higher proportion change talk (r = .11, p = .004) and higher proportion change talk was related to reductions in risk behavior at follow up (r = -.16, p < .001). When tested as two independent effects, client change talk was not significant, but sustain talk was positively associated with worse outcome (r = .19, p < .001). Finally, the relational hypothesis was not supported, but heterogeneity in technical hypothesis path effect sizes was partially explained by inter- and intrapersonal moderators. This meta-analysis provides additional support for the technical hypothesis of MI efficacy; future research on the relational hypothesis should occur in the field rather than in the context of clinical trials. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Technical Advisory Team (TAT) report on the rocket sled test accident of October 9, 2008.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stofleth, Jerome H.; Dinallo, Michael Anthony; Medina, Anthony J.

2009-01-01

This report summarizes probable causes and contributing factors that led to a rocket motor initiating prematurely while employees were preparing instrumentation for an AIII rocket sled test at SNL/NM, resulting in a Type-B Accident. Originally prepared by the Technical Advisory Team that provided technical assistance to the NNSA's Accident Investigation Board, the report includes analyses of several proposed causes and concludes that the most probable source of power for premature initiation of the rocket motor was the independent battery contained in the HiCap recorder package. The report includes data, evidence, and proposed scenarios to substantiate the analyses.

Obtaining Technical Support for Superfund, RCRA and Brownfields Site Issues Fact Sheet

EPA Pesticide Factsheets

EPA’s Technical Support Centers (TSCs) and other technical support services are available to Regional RemedialProject Managers, Corrective Action Staff, and On-Scene Coordinators needing specialized technical expertisefor specific tasks or projects.

Accounting for technical noise in differential expression analysis of single-cell RNA sequencing data.

PubMed

Jia, Cheng; Hu, Yu; Kelly, Derek; Kim, Junhyong; Li, Mingyao; Zhang, Nancy R

2017-11-02

Recent technological breakthroughs have made it possible to measure RNA expression at the single-cell level, thus paving the way for exploring expression heterogeneity among individual cells. Current single-cell RNA sequencing (scRNA-seq) protocols are complex and introduce technical biases that vary across cells, which can bias downstream analysis without proper adjustment. To account for cell-to-cell technical differences, we propose a statistical framework, TASC (Toolkit for Analysis of Single Cell RNA-seq), an empirical Bayes approach to reliably model the cell-specific dropout rates and amplification bias by use of external RNA spike-ins. TASC incorporates the technical parameters, which reflect cell-to-cell batch effects, into a hierarchical mixture model to estimate the biological variance of a gene and detect differentially expressed genes. More importantly, TASC is able to adjust for covariates to further eliminate confounding that may originate from cell size and cell cycle differences. In simulation and real scRNA-seq data, TASC achieves accurate Type I error control and displays competitive sensitivity and improved robustness to batch effects in differential expression analysis, compared to existing methods. TASC is programmed to be computationally efficient, taking advantage of multi-threaded parallelization. We believe that TASC will provide a robust platform for researchers to leverage the power of scRNA-seq. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

Accounting for technical noise in differential expression analysis of single-cell RNA sequencing data

PubMed Central

Jia, Cheng; Hu, Yu; Kelly, Derek; Kim, Junhyong

2017-01-01

Abstract Recent technological breakthroughs have made it possible to measure RNA expression at the single-cell level, thus paving the way for exploring expression heterogeneity among individual cells. Current single-cell RNA sequencing (scRNA-seq) protocols are complex and introduce technical biases that vary across cells, which can bias downstream analysis without proper adjustment. To account for cell-to-cell technical differences, we propose a statistical framework, TASC (Toolkit for Analysis of Single Cell RNA-seq), an empirical Bayes approach to reliably model the cell-specific dropout rates and amplification bias by use of external RNA spike-ins. TASC incorporates the technical parameters, which reflect cell-to-cell batch effects, into a hierarchical mixture model to estimate the biological variance of a gene and detect differentially expressed genes. More importantly, TASC is able to adjust for covariates to further eliminate confounding that may originate from cell size and cell cycle differences. In simulation and real scRNA-seq data, TASC achieves accurate Type I error control and displays competitive sensitivity and improved robustness to batch effects in differential expression analysis, compared to existing methods. TASC is programmed to be computationally efficient, taking advantage of multi-threaded parallelization. We believe that TASC will provide a robust platform for researchers to leverage the power of scRNA-seq. PMID:29036714

DEVELOPMENT OF METRICS FOR PROTOCOLS AND OTHER TECHNICAL PRODUCTS.

PubMed

Veiga, Daniela Francescato; Ferreira, Lydia Masako

2015-01-01

To develop a proposal for metrics for protocols and other technical products to be applied in assessing the Postgraduate Programs of Medicine III - Capes. The 2013 area documents of all the 48 Capes areas were read. From the analysis of the criteria used by the areas at the 2013's Triennal Assessment, a proposal for metrics for protocols and other technical products was developed to be applied in assessing the Postgraduate Programs of Medicine III. This proposal was based on the criteria of Biological Sciences I and Interdisciplinary areas. Only seven areas have described a scoring system for technical products. The products considered and the scoring varied widely. Due to the wide range of different technical products which could be considered relevant, and that would not be punctuated if they were not previously specified, it was developed, for the Medicine III, a proposal for metrics in which five specific criteria to be analyzed: Demand, Relevance/Impact, Scope, Complexity and Adherence to the Program. Based on these criteria, each product can receive 10 to 100 points. This proposal can be applied to the item Intellectual Production of the evaluation form, in subsection "Technical production, patents and other relevant production". The program will be scored as Very Good when it reaches mean ≥150 points/permanent professor/quadrennium; Good, mean between 100 and 149 points; Regular, mean between 60 and 99 points; Weak mean between 30 and 59 points; Insufficient, up to 29 points/permanent professor/quadrennium. Desenvolver proposta de métricas para protocolos e outras produções técnicas a serem aplicadas na avaliação dos Programas de Pós-Graduação da Área Medicina III da Capes. Foram lidos os documentos de área de 2013 de todas as 48 Áreas da Capes. A partir da análise dos critérios utilizados por elas na avaliação trienal 2013, foi desenvolvida uma proposta de métricas para protocolos e outras produções técnicas. Esta proposta foi baseada nos critérios adotados pelas Áreas Ciências Biológicas I e Interdisciplinar. Apenas sete áreas descreveram sistema de pontuação para produtos técnicos, e as produções consideradas e a pontuação variaram amplamente. Dada à imensa gama de produções técnicas diferentes que podem ser consideradas relevantes, e que não seriam contempladas em sistema de pontuação caso fossem especificadas, foi desenvolvida para a Medicina III uma proposta de métricas em que são analisados cinco critérios específicos para cada produção: Demanda, Relevância/Impacto, Abrangência, Complexidade e Aderência ao Programa. Com base nestes critérios, cada produção pode receber de 10 a 100 pontos. Esta proposta poderá ser aplicada ao item Produção Intelectual da Ficha de Avaliação, subitem "Produção técnica, patentes e outras produções consideradas relevantes". Será considerado Muito Bom o Programa que obtiver média ≥150 pontos/docente permanente/quadriênio; Bom, média entre 100 e 149 pontos; Regular, média entre 60 e 99 pontos; Fraco, média entre 30 e 59 pontos; e Deficiente média ≤29 pontos/docente permanente/quadriênio.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ainsworth, Nathan; Heaps, Colton; Symko-Davies, Martha

The purpose of this report is to propose a technical roadmap for power supply technology to power the Tactical Assault Light Operator Suit (TALOS), an armored, powered exoskeleton currently in development for U.S. Special Operations Command operators. TALOS' power supply system must meet size targets similar to the size of a large backpack while providing significant electrical power for an entire mission cycle without resupply. This report proposes a staged development path based on three fundamental technical approaches.

Heat pump assisted geothermal heating system for Felix Spa, Romania

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosca, Marcel; Maghiar, Teodor

1996-01-24

The paper presents a pre-feasibility type study of a proposed heat pump assisted geothermal heating system for an average hotel in Felix Spa, Romania. After a brief presentation of the geothermal reservoir, the paper gives the methodology and the results of the technical and economical calculations. The technical and economical viability of the proposed system is discussed in detail in the final part of the paper.

Heat pump assisted geothermal heating system for Felix Spa, Romania

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosca, M.; Maghiar, T.

1996-12-31

The paper presents a pre-feasibility type study of a proposed heat pump assisted geothermal heating system for an average hotel in Felix Spa, Romania. After a brief presentation of the geothermal reservoir, the paper gives the methodology and the results of the technical and economical calculations. The technical and economical viability of the proposed system is discussed in detail in the final part of the paper.

49 CFR 20.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.23 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 311.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1158.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... analysis directly applying any professional or technical discipline. For example, drafting of a legal... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 311.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.23 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.23 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.23 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1158.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... analysis directly applying any professional or technical discipline. For example, drafting of a legal... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... analysis directly applying any professional or technical discipline. For example, drafting of a legal... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 311.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1158.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

NASA Institute for Advanced Concepts

NASA Technical Reports Server (NTRS)

Cassanova, Robert A.

1999-01-01

The purpose of NASA Institute for Advanced Concepts (NIAC) is to provide an independent, open forum for the external analysis and definition of space and aeronautics advanced concepts to complement the advanced concepts activities conducted within the NASA Enterprises. The NIAC will issue Calls for Proposals during each year of operation and will select revolutionary advanced concepts for grant or contract awards through a peer review process. Final selection of awards will be with the concurrence of NASA's Chief Technologist. The operation of the NIAC is reviewed biannually by the NIAC Science, Exploration and Technology Council (NSETC) whose members are drawn from the senior levels of industry and universities. The process of defining the technical scope of the initial Call for Proposals was begun with the NIAC "Grand Challenges" workshop conducted on May 21-22, 1998 in Columbia, Maryland. These "Grand Challenges" resulting from this workshop became the essence of the technical scope for the first Phase I Call for Proposals which was released on June 19, 1998 with a due date of July 31, 1998. The first Phase I Call for Proposals attracted 119 proposals. After a thorough peer review, prioritization by NIAC and technical concurrence by NASA, sixteen subgrants were awarded. The second Phase I Call for Proposals was released on November 23, 1998 with a due date of January 31, 1999. Sixty-three (63) proposals were received in response to this Call. On December 2-3, 1998, the NSETC met to review the progress and future plans of the NIAC. The next NSETC meeting is scheduled for August 5-6, 1999. The first Phase II Call for Proposals was released to the current Phase I grantees on February 3,1999 with a due date of May 31, 1999. Plans for the second year of the contract include a continuation of the sequence of Phase I and Phase II Calls for Proposals and hosting the first NIAC Annual Meeting and USRA/NIAC Technical Symposium in NASA HQ.

Methodological proposal for the remediation of a site affected by phosphogypsum deposits

NASA Astrophysics Data System (ADS)

Martínez-Sanchez, M. J.; Perez-Sirvent, C.; Bolivar, J. P.; Garcia-Tenorio, R.

2012-04-01

The accumulation of phosphogysum (PY) produces a well known environmental problems. The proposals for the remediation of these sites require multidisciplinary and very specific studies. Since they cover large areas a sampling design specifically outlined for each case is necessary in order the contaminants, transfer pathways and particular processes can be correctly identified. In addition to a suitable sampling of the soil, aquatic medium and biota, appropriate studies of the space-temporal variations by means of control samples are required. Two different stages should be considered: 1.- Diagnostic stage This stage includes preliminary studies, identification of possible sources of radiosotopes, design of the appropriate sampling plan, hydrogeological study, characterization and study of the space-temporal variability of radioisotopes and other contaminants, as well as the risk assessement for health and ecosystems, that depends on the future use of the site. 2.- Remediation proposal stage It comprises the evaluation and comparison of the different procedures for the decontamination/remediation, including models experiments at the laboratory. To this respect, the preparation and detailed study of a small scale pilot project is a task of particular relevance. In this way the suitability of the remediating technology can be checked, and its performance optimized. These two stages allow a technically well-founded proposal to be presented to the Organisms or Institutions in charge of the problem and facilitate decision-making. It both stages be included in a social communication campaign in order the final proposal be accepted by stakeholders.

29 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

43 CFR 18.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

24 CFR 87.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

28 CFR 69.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.15 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

29 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

32 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... or technical discipline. For example, drafting of a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

45 CFR 604.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

18 CFR 1315.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

18 CFR 1315.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

24 CFR 87.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

45 CFR 604.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

28 CFR 69.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

31 CFR 21.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.15 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

18 CFR 1315.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 712.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

40 CFR 34.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

32 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... or technical discipline. For example, drafting of a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

22 CFR 712.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

40 CFR 34.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

31 CFR 21.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

24 CFR 87.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

45 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

38 CFR 45.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... or technical discipline. For example, drafting of a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

14 CFR 1271.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

24 CFR 87.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

45 CFR 1158.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

31 CFR 21.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

41 CFR 105-69.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... or technical discipline. For example, drafting or a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

45 CFR 604.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

14 CFR 1271.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.15 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

40 CFR 34.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

18 CFR 1315.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

41 CFR 105-69.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... or technical discipline. For example, drafting or a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

38 CFR 45.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... or technical discipline. For example, drafting of a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

45 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

41 CFR 105-69.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... or technical discipline. For example, drafting or a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

38 CFR 45.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... or technical discipline. For example, drafting of a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

45 CFR 1158.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

32 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... or technical discipline. For example, drafting of a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

45 CFR 1158.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

6 CFR 9.15 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

29 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

22 CFR 712.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

38 CFR 45.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... or technical discipline. For example, drafting of a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

12 CFR 411.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

14 CFR 1271.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

31 CFR 21.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

29 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

Towards passive brain-computer interfaces: applying brain-computer interface technology to human-machine systems in general.

PubMed

Zander, Thorsten O; Kothe, Christian

2011-04-01

Cognitive monitoring is an approach utilizing realtime brain signal decoding (RBSD) for gaining information on the ongoing cognitive user state. In recent decades this approach has brought valuable insight into the cognition of an interacting human. Automated RBSD can be used to set up a brain-computer interface (BCI) providing a novel input modality for technical systems solely based on brain activity. In BCIs the user usually sends voluntary and directed commands to control the connected computer system or to communicate through it. In this paper we propose an extension of this approach by fusing BCI technology with cognitive monitoring, providing valuable information about the users' intentions, situational interpretations and emotional states to the technical system. We call this approach passive BCI. In the following we give an overview of studies which utilize passive BCI, as well as other novel types of applications resulting from BCI technology. We especially focus on applications for healthy users, and the specific requirements and demands of this user group. Since the presented approach of combining cognitive monitoring with BCI technology is very similar to the concept of BCIs itself we propose a unifying categorization of BCI-based applications, including the novel approach of passive BCI.

75 FR 41404 - List of Approved Spent Fuel Storage Casks: NUHOMS®

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-16

.... The NRC is taking this action because the applicant identified that a certain Technical Specification (TS) for Boral characterization was not written precisely. Specifically, the requirements for meeting... changes to the technical specifications. The NRC also published a direct final rule on May 6, 2010 (75 FR...

77 FR 58421 - Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-20

... Ventilation System Surveillance Requirements To Operate for 10 Hours per Month,'' Using the Consolidated Line... currently require operating the ventilation system for at least 10 continuous hours with the heaters... Technical Specifications (TSs) Task Force (TSTF) Traveler TSTF-522, Revision 0, ``Revise Ventilation System...

The Amateurs' Love Affair with Large Datasets

NASA Astrophysics Data System (ADS)

Price, Aaron; Jacoby, S. H.; Henden, A.

2006-12-01

Amateur astronomers are professionals in other areas. They bring expertise from such varied and technical careers as computer science, mathematics, engineering, and marketing. These skills, coupled with an enthusiasm for astronomy, can be used to help manage the large data sets coming online in the next decade. We will show specific examples where teams of amateurs have been involved in mining large, online data sets and have authored and published their own papers in peer-reviewed astronomical journals. Using the proposed LSST database as an example, we will outline a framework for involving amateurs in data analysis and education with large astronomical surveys.

Integrated controls and health monitoring for chemical transfer propulsion

NASA Technical Reports Server (NTRS)

Millis, Marc G.; Binder, Michael P.

1990-01-01

NASA is reviewing various propulsion technologies for exploring space. The requirements are examined for one enabling propulsion technology: Integrated Controls and Health Monitoring (ICHM) for Chemical Transfer Propulsion (CTP). Functional requirements for a CTP-ICHM system are proposed from tentative mission scenarios, vehicle configurations, CTP specifications, and technical feasibility. These CTP-ICHM requirements go beyond traditional reliable operation and emergency shutoff control to include: (1) enhanced mission flexibility; (2) continuously variable throttling; (3) tank-head start control; (4) automated prestart and post-shutoff engine check; (5) monitoring of space exposure degradation; and (6) product evolution flexibility. Technology development plans are also discussed.

Technology assessment of human spaceflight - Combining philosophical and technical issues

NASA Astrophysics Data System (ADS)

Fromm, J.; Hoevelmann, G. H.

1992-08-01

A transutilitarian rationale is proposed for assessing human spaceflight that is based on objectives for these endeavors and ethical norms of conduct. Specific attention is given to: presupposed/tacit reasons for including man in spaceflight and the restricted notion of rational/justifiable activity. It is shown that economic rationale is insufficient and unsuitable as a means for assessing manned spaceflight, and transutilitarian objectives are compiled that contribute to the motivation for manned flight. The transutilitarian motivations include: pioneering uncharted territory, enhancing national prestige, establishing space-related autonomy, promoting international cooperation, and enhancing science and the quality of human life.

Birth of a megaproject: Political economy of flood control in bangladesh

NASA Astrophysics Data System (ADS)

Boyce, James K.

1990-07-01

A major flood control initiative has been launched in Bangladesh under the coordination of the World Bank. The bank's five-year Action Plan is intended to initiate a long-term investment program, the specifics of which remain to be determined. Long-term proposals under consideration include the construction of massive embankments along the great rivers of the Bangladesh delta. The wisdom of such a “structural solution” to Bangladesh's flood problems can be questioned on economic, environmental, and technical grounds. Regrettably, the decision-making process has not encouraged wide debate on these questions.

Constrained Stochastic Extended Redundancy Analysis.

PubMed

DeSarbo, Wayne S; Hwang, Heungsun; Stadler Blank, Ashley; Kappe, Eelco

2015-06-01

We devise a new statistical methodology called constrained stochastic extended redundancy analysis (CSERA) to examine the comparative impact of various conceptual factors, or drivers, as well as the specific predictor variables that contribute to each driver on designated dependent variable(s). The technical details of the proposed methodology, the maximum likelihood estimation algorithm, and model selection heuristics are discussed. A sports marketing consumer psychology application is provided in a Major League Baseball (MLB) context where the effects of six conceptual drivers of game attendance and their defining predictor variables are estimated. Results compare favorably to those obtained using traditional extended redundancy analysis (ERA).

76 FR 79675 - Pomperaug Hydro Project Andrew Peklo III; Notice of Site Visit and Technical Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-22

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 12790-001] Pomperaug Hydro Project Andrew Peklo III; Notice of Site Visit and Technical Meeting On January 18, 2012, Office of Energy Projects staff will hold a site visit and technical meeting for the proposed Pomperaug Hydro Project (FERC...

A comparison of a technical and a participatory application of social impact assessment.

Treesearch

Dennis R Becker; Charles C Harris; Erik A Nielsen; William J. McLaughlin

2004-01-01

Results of independent applications of a technical and a participatory approach to SIA are compared for an assessment of impacts of the proposed removal of hydroelectric dams to recover threatened and endangered salmon in the Pacific Northwest of the United States. The analysis focuses on empirical differences and similarities between the technical social analysis...

Preparing Research and Development Proposals for Vocational-Technical Education. Research Series No. 40.

ERIC Educational Resources Information Center

Lamberth, Edwin E.

The purpose of this handbook is to present in a simple form the processes and procedures involved in preparing research and development projects in vocational-technical education in the State of Tennessee. It was prepared in conjunction with the Research Coordinating Unit (RCU) and the division of Vocational-Technical Education, State Department…

Charles Morris's Semiotic Model and Analytical Studies of Visual and Verbal Representations in Technical Communication

ERIC Educational Resources Information Center

Fan, Jiang-Ping

2006-01-01

In this article, the author demonstrates that the semiotic model proposed by Charles Morris enables us to optimize our understanding of technical communication practices and provides a good point of inquiry. To illustrate this point, the author exemplifies the semiotic approaches by scholars in technical communication and elaborates Morris's model…

30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Gas Operations (as incorporated by reference in § 250.198); and (ii) API Spec Q1, Specification for... in § 250.198). (3) All SSV's and USV's must meet the technical specifications of API Spec 6A and 6AV1. All SSSVs must meet the technical specifications of API Specification 14A (as incorporated by...

30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Gas Operations (as incorporated by reference in § 250.198); and (ii) API Spec Q1, Specification for... in § 250.198). (3) All SSV's and USV's must meet the technical specifications of API Spec 6A and 6AV1. All SSSVs must meet the technical specifications of API Specification 14A (as incorporated by...

30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Gas Operations (as incorporated by reference in § 250.198); and (ii) API Spec Q1, Specification for... in § 250.198). (3) All SSV's and USV's must meet the technical specifications of API Spec 6A and 6AV1. All SSSVs must meet the technical specifications of API Specification 14A (as incorporated by...

SETI target selection.

PubMed

Latham, D W; Soderblom, D R

1995-01-01

The NASA High Resolution Microwave Survey consists of two complementary elements: a Sky Survey of the entire sky to a moderate level of sensitivity; and a Targeted Search of nearby stars, one at a time, to a much deeper level of sensitivity. In this paper we propose strategies for target selection. We have two goals: to improve the chances of successful detection of signals from technical civilizations that inhabit planets around solar-type stars, and to minimize the chances of missing signals from unexpected sites. For the main Targeted Search survey of approximately 1000 nearby solar-type stars, we argue that the selection criteria should be heavily biased by what we know about the origin and evolution of life here on Earth. We propose that observations of stars with stellar companions orbiting near the habitable zone should be de-emphasized, because such companions would prevent the formation of habitable planets. We also propose that observations of stars younger than about three billion years should be de-emphasized in favor of older stars, because our own technical civilization took longer than three billion years to evolve here on Earth. To provide the information needed for the preparation of specific target lists, we have undertaken an inventory of a large sample of solar-type stars out to a distance of 60 pc, with the goal of characterizing the relevant astrophysical properties of these stars, especially their ages and companionship. To complement the main survey, we propose that a modest sample of the nearest stars should be observed without any selection biases whatsoever. Finally, we argue that efforts to identify stars with planetary systems should be expanded. If found, such systems should receive intensive scrutiny.

Proposal Tools for ASTRO-E

NASA Astrophysics Data System (ADS)

Mukai, K.; ASTRO-E Guest Observer Facility Team

1998-12-01

The XRS instrument on board ASTRO-E is expected to last about two years, before it runs out of cryogen. This leads us to place a particular emphasis on the technical aspects of the observing proposals to maximize the scientific return, more so than for missions/instruments with longer life times. In this talk, we will introduce the tools that we provide for you to write technically sound ASTRO-E XRS proposals. They include PIMMS/W3pimms and xspec/WebSpec for exposure time calculation, simaste for more detailed simulations (particularly of extended sources), and Wasabi, the Web-based observation visualization tool.

44 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

32 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... technical discipline. For example, drafting of a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

38 CFR 45.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

44 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

38 CFR 45.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

45 CFR 1230.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

32 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... technical discipline. For example, drafting of a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

14 CFR § 1271.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

38 CFR 45.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

44 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

32 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... technical discipline. For example, drafting of a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

45 CFR 1230.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

76 FR 19766 - California Independent System Operator Corporation; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-08

...) Capacity Procurement Mechanism (CPM) and exceptional dispatch mitigation provisions.\\1\\ Take notice that... (2011). The purpose of the technical conference is to discuss the issues raised by CAISO's proposed CPM...

78 FR 77615 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-24

... information identified in this proposed AD, contact Bombardier, Inc., Q-Series Technical Help Desk, 123... Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada; telephone 416-375-4000; fax...

13 CFR 306.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... TRAINING, RESEARCH AND TECHNICAL ASSISTANCE INVESTMENTS Local and National Technical Assistance § 306.1 Purpose and scope. (a) Local and National Technical Assistance Investments may: (1) Determine the causes... business. (c) EDA may identify specific training, research or technical assistance Projects it will fund...

Biological assessment for the transfer of the DP land tract

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keller, D.C.

1996-10-01

The Department of Energy (DOE) is proposing to transfer to the County of Los Alamos up to 10-ha (25-ac) of federal land located in Technical Area-21 to be developed for commercial uses. Previous studies for the proposed land transfer area indicate that potential habitat for four threatened, endangered, and sensitive species occurs in or adjacent to the proposed land transfer area. These include the northern goshawk (federal species of concern), Mexican spotted owl (federal threatened), the spotted bat (federal species of concern, state threatened), die peregrine falcon (federal endangered, state endangered), and the. In order to determine the possible influencesmore » of the land transfer on these organisms, information from species-specific surveys was collected. These surveys were used to confirm the presence of these species or to infer their absence in or near the project area. It was concluded that none of die above mentioned species occur in the project area. Stretches of the stream channel within Los Alamos Canyon have been identified as palustrine and riverine, temporarily flooded wetlands. The proposed land transfer should not affect these wetlands.« less

11 CFR 9033.12 - Production of computerized information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... conform to the technical specifications, including file requirements, described in the Federal Election Commission's Computerized Magnetic Media Requirements for title 26 Candidates/Committees Receiving Federal... outstanding campaign obligations. (b) Organization of computerized information and technical specifications...

11 CFR 9033.12 - Production of computerized information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... conform to the technical specifications, including file requirements, described in the Federal Election Commission's Computerized Magnetic Media Requirements for title 26 Candidates/Committees Receiving Federal... outstanding campaign obligations. (b) Organization of computerized information and technical specifications...

11 CFR 9033.12 - Production of computerized information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... conform to the technical specifications, including file requirements, described in the Federal Election Commission's Computerized Magnetic Media Requirements for title 26 Candidates/Committees Receiving Federal... outstanding campaign obligations. (b) Organization of computerized information and technical specifications...

Advanced technology for America's future in space

NASA Technical Reports Server (NTRS)

1990-01-01

In response to Recommendation 8 of the Augustine Committee Report, NASA's Office of Aeronautics, Exploration and Technology (OAET) developed a proposed 'Integrated Technology Plan for the Civil Space Program' that entails substantial changes in the processes, structure and the content of NASA's space research and technology program. The Space Systems and Technology Advisory Committee (SSTAC, a subcommittee of the NASA Advisory Committee) and several other senior, expert, informed advisory groups conducted a review of NASA's proposed Integrated Technology Plan (ITP). This review was in response to the specific request in Recommendation 8 that 'NASA utilize an expert, outside review process, managed from headquarters, to assist in the allocation of technology funds'. This document, the final report from that review, addresses: (1) summary recommendations; (2) mission needs; (3) the integrated technology plan; (4) summary reports of the technical panels; and (5) conclusions and observations.

Space station attached payload program support

NASA Technical Reports Server (NTRS)

Estes, Maurice G., Jr.; Brown, Bardle D.

1989-01-01

The USRA is providing management and technical support for the peer review of the Space Station Freedom Attached Payload proposals. USRA is arranging for consultants to evaluate proposals, arranging meeting facilities for the reviewers to meet in Huntsville, Alabama and management of the actual review meetings. Assistance in developing an Experiment Requirements Data Base and Engineering/Technical Assessment support for the MSFC Technical Evaluation Team is also being provided. The results of the project will be coordinated into a consistent set of reviews and reports by USRA. The strengths and weaknesses analysis provided by the peer panel reviewers will by used NASA personnel in the selection of experiments for implementation on the Space Station Freedom.

Method of identification of patent trends based on descriptions of technical functions

NASA Astrophysics Data System (ADS)

Korobkin, D. M.; Fomenkov, S. A.; Golovanchikov, A. B.

2018-05-01

The use of the global patent space to determine the scientific and technological priorities for the technical systems development (identifying patent trends) allows one to forecast the direction of the technical systems development and, accordingly, select patents of priority technical subjects as a source for updating the technical functions database and physical effects database. The authors propose an original method that uses as trend terms not individual unigrams or n-gram (usually for existing methods and systems), but structured descriptions of technical functions in the form “Subject-Action-Object” (SAO), which in the authors’ opinion are the basis of the invention.

10 CFR 611.103 - Application evaluation.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Technical Program Factors such as economic development and diversity in technology, company, risk, and... DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS ADVANCED TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE..., the following: (1) The technical merit of the proposed advanced technology vehicles or qualifying...

77 FR 26660 - Guidelines for the Transfer of Excess Computers or Other Technical Equipment Pursuant to Section...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-07

....usda.gov . SUPPLEMENTARY INFORMATION: A. Background A proposed rule was published in the Federal.... Computers or other technical equipment means central processing units, laptops, desktops, computer mouses...

10 CFR 61.13 - Technical analyses.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Technical analyses. 61.13 Section 61.13 Energy NUCLEAR....13 Technical analyses. The specific technical information must also include the following analyses... air, soil, groundwater, surface water, plant uptake, and exhumation by burrowing animals. The analyses...

Facilitating 3D Virtual World Learning Environments Creation by Non-Technical End Users through Template-Based Virtual World Instantiation

ERIC Educational Resources Information Center

Liu, Chang; Zhong, Ying; Ozercan, Sertac; Zhu, Qing

2013-01-01

This paper presents a template-based solution to overcome technical barriers non-technical computer end users face when developing functional learning environments in three-dimensional virtual worlds (3DVW). "iVirtualWorld," a prototype of a platform-independent 3DVW creation tool that implements the proposed solution, facilitates 3DVW…

Technical-Oriented Enterprise Resource Planning (ERP) Body of Knowledge for Information Systems Programs: Content and Implementation

ERIC Educational Resources Information Center

Boyle, Todd A.

2007-01-01

In this article, the author proposes a body of knowledge that the educators can use to incorporate the technical aspects of enterprise resource planning (ERP) into an information systems (IS) program, encapsulated as the ERP technical knowledge framework. To illustrate the application of this framework, the author discusses a course sequence that…

A Report by the Governor's Task Force on Vocational and Technical Education.

ERIC Educational Resources Information Center

Governor's Task Force on Vocational and Technical Education, Columbus, OH.

On July 19, 1968, a Task Force on Vocational and Technical Education was created by the governor of Ohio to develop proposals for organization, financing, and legislation. Some major problems to which the Task Force gave attention were: (1) the serious gap between the need for and the availability of vocational and technical education, (2) the…

The Development of a Project-Based Collaborative Technical Writing Model Founded on Learner Feedback in a Tertiary Aeronautical Engineering Program

ERIC Educational Resources Information Center

Tatzl, Dietmar; Hassler, Wolfgang; Messnarz, Bernd; Fluhr, Holger

2012-01-01

The present article describes and evaluates collaborative interdisciplinary group projects initiated by content lecturers and an English-as-a-Foreign-Language (EFL) instructor for the purpose of teaching technical writing skills in an aeronautical engineering degree program. The proposed technical writing model is assessed against the results of a…

North Boundry Containment/Treatment System Performance Report. Rocky Mountain Arsenal, Denver, Colorado. Volume 1

DTIC Science & Technology

1985-12-01

Department of Health after reviewing the proposed 1700-ft expansion concept, stated that the north boundary system would be required to intercept and treat...upper Denver sand units along the system alignment. 8. During May 1979, technical discussions between RMA and the Colorado Department of Health ...centered on the technical feasibility and benefits of constructing a 1200-ft segment of the proposed 1700-ft expansion immediately to intercept a DBCP plume

Shrinking the Supply Chain for Implantable Coronary Stent Devices.

PubMed

Moore, Sean S; O'Sullivan, Kevin J; Verdecchia, Francesco

2016-02-01

Stenting treatments for the management of disease in the heart, arterial and venous systems, biliary ducts, urethras, ureters, oesophageal tract and prostate have made enormous technical advances since their introduction into clinical use. The progression from metallic to polymer based bio-absorbable stents, coupled with the advances in additive manufacturing techniques, present a unique opportunity to completely re-envision the design, manufacture, and supply chain of stents. This paper looks at current stenting trends and proposes a future where the stent supply chain is condensed from ~150 days to ~20 min. The Cardiologist therefore has the opportunity to become a designer, manufacturer and user with patients receiving custom stents specific to their unique pathology that will be generated, delivered and deployed in the Cath-lab. The paper will outline this potentially revolutionary development and consider the technical challenges that will need to be overcome in order to achieve these ambitious goals. A high level overview of the generating eluting stents in situ program-GENESIS-is outlined including some early experimental work.

Johnson Space Center's strategic game plan: Charting a course to the year 2000 and beyond

NASA Technical Reports Server (NTRS)

1987-01-01

The Johnson Space Center has established five major goals to meet the Nation's expectation of maintaining U.S. preeminence in space. The first three are technical in nature. They define the basic mission-the reason for being. The two goals relating to the Space Shuttle and Space Station are obviously the most demanding in their immediate claim for major resources. The third goal is equally important in that the technical competence must be maintained and enhanced. The remaining two goals address the two critical success factors required for achieving the first three. One goal pertains to maintaining and enhancing the highly skilled work force. The other goal concerns the important relations with other key members of the U.S. space team. Each goal is listed along with a proposed strategy or approach for implementing each goal. Subsequently, each goal is accompanied by a brief explanation and a set of objectives. These objectives provide the specific targets of opportunity for focusing the immediate efforts.

Proprietary Manned Space Flight Proposals, 1973 to 2013, plus

NASA Astrophysics Data System (ADS)

Fisher, Philip

2016-03-01

In 1973 a concept for a manned space flight experiment was submitted to NASA as an unsolicited proprietary proposal,*. In 1998*, 2004*, and 2013* proposals successively more details were provided. An abbreviation of the 1998 proposal was published. By 2013 the five technical variables of 1998 had increased to over ten. Some technical and management details of the proposals will be presented and updated. The first flight of two could use some hardware now being developed. The experiment seems superior to any mission publicly advocated by NASA, so this talk's purpose is to encourage NASA to delay landing humans on Mars until the first spacecraft can be developed and activated. *Complete proposals are in the Philip C. Fisher papers, Niels Bohr Library and Archives, American Institute of Physics (available one year after author's death). Work after 1982 supported by successive forms of Ruffner Associates.

Defining the "proven technology" technical criterion in the reactor technology assessment for Malaysia's nuclear power program

NASA Astrophysics Data System (ADS)

Anuar, Nuraslinda; Kahar, Wan Shakirah Wan Abdul; Manan, Jamal Abdul Nasir Abd

2015-04-01

Developing countries that are considering the deployment of nuclear power plants (NPPs) in the near future need to perform reactor technology assessment (RTA) in order to select the most suitable reactor design. The International Atomic Energy Agency (IAEA) reported in the Common User Considerations (CUC) document that "proven technology" is one of the most important technical criteria for newcomer countries in performing the RTA. The qualitative description of five desired features for "proven technology" is relatively broad and only provides a general guideline to its characterization. This paper proposes a methodology to define the "proven technology" term according to a specific country's requirements using a three-stage evaluation process. The first evaluation stage screens the available technologies in the market against a predefined minimum Technology Readiness Level (TRL) derived as a condition based on national needs and policy objectives. The result is a list of technology options, which are then assessed in the second evaluation stage against quantitative definitions of CUC desired features for proven technology. The potential technology candidates produced from this evaluation is further narrowed down to obtain a list of proven technology candidates by assessing them against selected risk criteria and the established maximum allowable total score using a scoring matrix. The outcome of this methodology is the proven technology candidates selected using an accurate definition of "proven technology" that fulfills the policy objectives, national needs and risk, and country-specific CUC desired features of the country that performs this assessment. A simplified assessment for Malaysia is carried out to demonstrate and suggest the use of the proposed methodology. In this exercise, ABWR, AP1000, APR1400 and EPR designs assumed the top-ranks of proven technology candidates according to Malaysia's definition of "proven technology".

47 CFR 73.319 - FM multiplex subcarrier technical standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false FM multiplex subcarrier technical standards. 73... SERVICES RADIO BROADCAST SERVICES FM Broadcast Stations § 73.319 FM multiplex subcarrier technical standards. (a) The technical specifications in this Section apply to all transmissions of FM multiplex...

Preliminary draft industrial siting administration permit application: Socioeconomic factors technical report. Final technical report, November 1980-May 1982. [Proposed WyCoalGas project in Converse County, Wyoming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1982-01-01

Under the with-project scenario, WyCoalGas is projected to make a difference in the long-range future of Converse County. Because of the size of the proposed construction and operations work forces, the projected changes in employment, income, labor force, and population will alter Converse County's economic role in the region. Specifically, as growth occurs, Converse County will begin to satisfy a larger portion of its own higher-ordered demands, those that are currently being satisfied by the economy of Casper. Business-serving and household-serving activities, currently absent, will find the larger income and population base forecast to occur with the WyCoalGas project desirable.more » Converse County's economy will begin to mature, moving away from strict dependence on extractive industries to a more sophisticated structure that could eventually appeal to national, and certainly, regional markets. The technical demand of the WyCoalGas plant will mean a significant influx of varying occupations and skills. The creation of basic manufacturing, advanced trade and service sectors, and concomitant finance and transportation firms will make Converse County more economically autonomous. The county will also begin to serve market center functions for the smaller counties of eastern Wyoming that currently rely on Casper, Cheyenne or other distant market centers. The projected conditions expected to exist in the absence of the WyCoalGas project, the socioeconomic conditions that would accompany the project, and the differences between the two scenarios are considered. The analysis is keyed to the linkages between Converse County and Natrona County.« less

7 CFR 3401.17 - Review criteria.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Regulations of the Department of Agriculture (Continued) COOPERATIVE STATE RESEARCH, EDUCATION, AND EXTENSION.... Overall scientific and technical quality of proposal 10 2. Scientific and technical quality of the.... Feasibility of attaining objectives; adequacy of professional training and experience, facilities and...

Technical Revisions to State Budgets and New Unit Set-Asides TSD

EPA Pesticide Factsheets

EPA proposed revising the Transport Rule's new unit set-asides (NUSAs) in certain states. This technical support document (TSD) shows underlying data and calculations and provides the information used to determine revised NUSAs in certain states.

Technical Support Documents Used to Develop the Chesapeake Bay TMDL

EPA Pesticide Factsheets

The Chesapeake Bay TMDL development was supported by several technical documents for water quality standards and allocation methodologies specific to the Chesapeake Bay. This page provides the technical support documents.

Review of the transport of selected radionuclides in the interim risk assessment for the Radioactive Waste Management Complex, Waste Area Group 7 Operable Unit 7-13/14, Idaho National Engineering and Environmental Laboratory, Idaho

USGS Publications Warehouse

Rousseau, Joseph P.; Landa, Edward R.; Nimmo, John R.; Cecil, L. DeWayne; Knobel, LeRoy L.; Glynn, Pierre D.; Kwicklis, Edward M.; Curtis, Gary P.; Stollenwerk, Kenneth G.; Anderson, Steven R.; Bartholomay, Roy C.; Bossong, Clifford R.; Orr, Brennon R.

2005-01-01

The U.S. Department of Energy (DOE) requested that the U.S. Geological Survey conduct an independent technical review of the Interim Risk Assessment (IRA) and Contaminant Screening for the Waste Area Group 7 (WAG-7) Remedial Investigation, the draft Addendum to the Work Plan for Operable Unit 7-13/14 WAG-7 comprehensive Remedial Investigation and Feasibility Study (RI/FS), and supporting documents that were prepared by Lockheed Martin Idaho Technologies, Inc. The purpose of the technical review was to assess the data and geotechnical approaches that were used to estimate future risks associated with the release of the actinides americium, uranium, neptunium, and plutonium to the Snake River Plain aquifer from wastes buried in pits and trenches at the Subsurface Disposal Area (SDA). The SDA is located at the Radioactive Waste Management Complex in southeastern Idaho within the boundaries of the Idaho National Engineering and Environmental Laboratory. Radionuclides have been buried in pits and trenches at the SDA since 1957 and 1952, respectively. Burial of transuranic wastes was discontinued in 1982. The five specific tasks associated with this review were defined in a ?Proposed Scope of Work? prepared by the DOE, and a follow-up workshop held in June 1998. The specific tasks were (1) to review the radionuclide sampling data to determine how reliable and significant are the reported radionuclide detections and how reliable is the ongoing sampling program, (2) to assess the physical and chemical processes that logically can be invoked to explain true detections, (3) to determine if distribution coefficients that were used in the IRA are reliable and if they have been applied properly, (4) to determine if transport model predictions are technically sound, and (5) to identify issues needing resolution to determine technical adequacy of the risk assessment analysis, and what additional work is required to resolve those issues.

48 CFR 252.235-7003 - Frequency authorization.

Code of Federal Regulations, 2014 CFR

2014-10-01

... characteristics of the proposed electromagnetic radiating device to the Contracting Officer during the initial... Contractor shall provide the technical operating characteristics of the proposed electromagnetic radiating...

Uranium Detection - Technique Validation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Colletti, Lisa Michelle; Garduno, Katherine; Lujan, Elmer J.

As a LANL activity for DOE/NNSA in support of SHINE Medical Technologies™ ‘Accelerator Technology’ we have been investigating the application of UV-vis spectroscopy for uranium analysis in solution. While the technique has been developed specifically for sulfate solutions, the proposed SHINE target solutions, it can be adapted to a range of different solution matrixes. The FY15 work scope incorporated technical development that would improve accuracy, specificity, linearity & range, precision & ruggedness, and comparative analysis. Significant progress was achieved throughout FY 15 addressing these technical challenges, as is summarized in this report. In addition, comparative analysis of unknown samples usingmore » the Davies-Gray titration technique highlighted the importance of controlling temperature during analysis (impacting both technique accuracy and linearity/range). To fully understand the impact of temperature, additional experimentation and data analyses were performed during FY16. The results from this FY15/FY16 work were presented in a detailed presentation, LA-UR-16-21310, and an update of this presentation is included with this short report summarizing the key findings. The technique is based on analysis of the most intense U(VI) absorbance band in the visible region of the uranium spectra in 1 M H 2SO 4, at λ max = 419.5 nm.« less

Career and Technical Education Administration: Requirements, Certification/Licensure, and Preparation

ERIC Educational Resources Information Center

Zirkle, Christopher J.; Jeffery, Jeremy O.

2017-01-01

The current climate of career and technical administration requirements in all 50 states was detailed and explored. An increasing number of states are not requiring specific career-technical administration certification/licensure in order to oversee secondary career and technical education (CTE) programs, with more states moving towards a general…

9 CFR 351.19 - Refusal of certification for specific lots.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AND VOLUNTARY INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT Remedies... lot of technical animal fat is ineligible for certification under § 351.3, or any materials to be used in a lot of technical animal fat would make the technical animal fat ineligible for such...

9 CFR 351.19 - Refusal of certification for specific lots.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AND VOLUNTARY INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT Remedies... lot of technical animal fat is ineligible for certification under § 351.3, or any materials to be used in a lot of technical animal fat would make the technical animal fat ineligible for such...

9 CFR 351.19 - Refusal of certification for specific lots.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AND VOLUNTARY INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT Remedies... lot of technical animal fat is ineligible for certification under § 351.3, or any materials to be used in a lot of technical animal fat would make the technical animal fat ineligible for such...

9 CFR 351.19 - Refusal of certification for specific lots.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AND VOLUNTARY INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT Remedies... lot of technical animal fat is ineligible for certification under § 351.3, or any materials to be used in a lot of technical animal fat would make the technical animal fat ineligible for such...

22 CFR 126.17 - Exemption pursuant to the Defense Trade Cooperation Treaty between the United States and the...

Code of Federal Regulations, 2013 CFR

2013-04-01

...; (ii) Technical data (including data packages, technical papers, manuals, presentations, specifications... person who receives defense articles, including technical data, but who does not have access to such... (other than technical data) shall be individually labeled with the appropriate identification detailed in...

Promotion of the Equal Access of Girls and Women to Technical and Vocational Education. Studies on Technical and Vocational Education 7.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

This monograph includes the final report of the International Expert Meeting on the Promotion of Equal Access of Girls and Women to Technical and Vocational Education (TVE) held in Seoul, Republic of Korea, and country discussion papers. The final report is composed of an introduction that proposes that many Member States require special measures…

77 FR 48112 - Pipeline Safety: Administrative Procedures; Updates and Technical Corrections

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-13

...This Notice of Proposed Rulemaking updates the administrative civil penalty maximums for violation of the pipeline safety regulations to conform to current law, updates the informal hearing and adjudication process for pipeline enforcement matters to conform to current law, amends other administrative procedures used by PHMSA personnel, and makes other technical corrections and updates to certain administrative procedures. The proposed amendments do not impose any new operating, maintenance, or other substantive requirements on pipeline owners or operators.