Ultra-Low-Power MEMS Selective Gas Sensors
NASA Technical Reports Server (NTRS)
Stetter, Joseph
2012-01-01
This innovation is a system for gas sensing that includes an ultra-low-power MEMS (microelectromechanical system) gas sensor, combined with unique electronic circuitry and a proprietary algorithm for operating the sensor. The electronics were created from scratch, and represent a novel design capable of low-power operation of the proprietary MEMS gas sensor platform. The algorithm is used to identify a specific target gas in a gas mixture, making the sensor selective to that target gas.
Safety and Mission Assurance (SMA) Automated Task Order Management System (ATOMS) Operation Manual
NASA Technical Reports Server (NTRS)
Wallace, Shawn; Fikes, Lou A.
2016-01-01
This document describes operational aspects of the ATOMS system. The information provided is limited to the functionality provided by ATOMS and does not include information provided in the contractor's proprietary financial and task management system.
Common MD-IS infrastructure for wireless data technologies
NASA Astrophysics Data System (ADS)
White, Malcolm E.
1995-12-01
The expansion of global networks, caused by growth and acquisition within the commercial sector, is forcing users to move away from proprietary systems in favor of standards-based, open systems architectures. The same is true in the wireless data communications arena, where operators of proprietary wireless data networks have endeavored to convince users that their particular implementation provides the best service. However, most of the vendors touting these solutions have failed to gain the critical mass that might have lead to their technologies' adoption as a defacto standard, and have been held back by a lack of applications and the high cost of mobile devices. The advent of the cellular digital packet data (CDPD) specification and its support by much of the public cellular service industry has set the stage for the ubiquitous coverage of wireless packet data services across the Unites States. Although CDPD was developed for operation over the advanced mobile phone system (AMPS) cellular network, many of the defined protocols are industry standards that can be applied to the construction of a common infrastructure supporting multiple airlink standards. This approach offers overall cost savings and operation efficiency for service providers, hardware, and software developers and end-users alike, and could be equally advantageous for those service operators using proprietary end system protocols, should they wish to migrate towards an open standard.
USDA-ARS?s Scientific Manuscript database
Simulation modelers increasingly require greater flexibility for model implementation on diverse operating systems, and they demand high computational speed for efficient iterative simulations. Additionally, model users may differ in preference for proprietary versus open-source software environment...
NASA Technical Reports Server (NTRS)
Sato, Kevin Y.
2012-01-01
The Bioculture System first flight will be to validate the performance of the hardware and its automated and manual operational capabilities in the space flight environment of the International Space Station. Biology, Engineering, and Operations tests will be conducted in the Bioculture System fully characterize its automated and manual functions to support cell culturing for short and long durations. No hypothesis-driven research will be conducted with biological sample, and the science leads have all provided their concurrence that none of the data they collect will be considered as proprietary and can be free distributed to the science community. The outcome of the validation flight will be to commission the hardware for use by the science community. This presentation will provide non-proprietary details about the Bioculture System and information about the activities for the first flight.
Guidelines and Minimum Standards for Operation of Texas Proprietary Schools. (Revised.)
ERIC Educational Resources Information Center
Texas Education Agency, Austin. Div. of Proprietary Schools and Veterans Education.
This guide, prepared to assist owners and managers of proprietary schools in Texas in applying for and obtaining approval by the Texas Education Agency, provides guidelines and minimum standards of practice for proprietary school operation. First, the guidelines are discussed in terms of definitions, exemptions, general provisions, certificates of…
Shahzad, Aamir; Landry, René; Lee, Malrey; Xiong, Naixue; Lee, Jongho; Lee, Changhoon
2016-01-01
Substantial changes have occurred in the Information Technology (IT) sectors and with these changes, the demand for remote access to field sensor information has increased. This allows visualization, monitoring, and control through various electronic devices, such as laptops, tablets, i-Pads, PCs, and cellular phones. The smart phone is considered as a more reliable, faster and efficient device to access and monitor industrial systems and their corresponding information interfaces anywhere and anytime. This study describes the deployment of a protocol whereby industrial system information can be securely accessed by cellular phones via a Supervisory Control And Data Acquisition (SCADA) server. To achieve the study goals, proprietary protocol interconnectivity with non-proprietary protocols and the usage of interconnectivity services are considered in detail. They support the visualization of the SCADA system information, and the related operations through smart phones. The intelligent sensors are configured and designated to process real information via cellular phones by employing information exchange services between the proprietary protocol and non-proprietary protocols. SCADA cellular access raises the issue of security flaws. For these challenges, a cryptography-based security method is considered and deployed, and it could be considered as a part of a proprietary protocol. Subsequently, transmission flows from the smart phones through a cellular network. PMID:27314351
Shahzad, Aamir; Landry, René; Lee, Malrey; Xiong, Naixue; Lee, Jongho; Lee, Changhoon
2016-06-14
Substantial changes have occurred in the Information Technology (IT) sectors and with these changes, the demand for remote access to field sensor information has increased. This allows visualization, monitoring, and control through various electronic devices, such as laptops, tablets, i-Pads, PCs, and cellular phones. The smart phone is considered as a more reliable, faster and efficient device to access and monitor industrial systems and their corresponding information interfaces anywhere and anytime. This study describes the deployment of a protocol whereby industrial system information can be securely accessed by cellular phones via a Supervisory Control And Data Acquisition (SCADA) server. To achieve the study goals, proprietary protocol interconnectivity with non-proprietary protocols and the usage of interconnectivity services are considered in detail. They support the visualization of the SCADA system information, and the related operations through smart phones. The intelligent sensors are configured and designated to process real information via cellular phones by employing information exchange services between the proprietary protocol and non-proprietary protocols. SCADA cellular access raises the issue of security flaws. For these challenges, a cryptography-based security method is considered and deployed, and it could be considered as a part of a proprietary protocol. Subsequently, transmission flows from the smart phones through a cellular network.
Clinical evaluation of improvised gauze-based negative pressure wound therapy in military wounds.
Mansoor, Junaid; Ellahi, Irfan; Junaid, Zartash; Habib, Adeel; Ilyas, Uzair
2015-10-01
The use of negative pressure wound therapy (NPWT) in civilian and military wounds is found effective in promoting granulation tissue, decreasing exudate and improving patient comfort. The Use of gauze-based NPWT is increasing in civilian trauma cases with availability of proprietary systems using gauze as filler material rather than the traditionally used reticulated open-cell foam. Military trauma wounds differ from civilian trauma wounds in energy of impact, degree and nature of contamination as well as the hostile environments. The Use of gauze as filler material for NPWT in military trauma wounds is less well studied. This study is a retrospective analysis of use of improvised gauze-based NPWT in military trauma wounds. The whole assembly was constructed from commonly available operation theatre supplies and no proprietary system was used. Results were very encouraging and the use of this improvised method can be useful and cheap alternative to costly proprietary systems. © 2013 The Authors. International Wound Journal © 2013 Medicalhelplines.com Inc and John Wiley & Sons Ltd.
Guidelines and Standards for Proprietary Schools.
ERIC Educational Resources Information Center
Georgia State Dept. of Education, Atlanta. Office of Planning and Development.
This guide contains information pertaining to the law, rules, regulations, and standards of practice that apply to proprietary schools operating in Georgia, as provided in the Georgia Proprietary School Act (O.C.G.A. Section 20-4-60 and following, Georgia School Laws). The guide has been adopted by the Georgia Board of Education and is used in the…
Opening up Library Automation Software
ERIC Educational Resources Information Center
Breeding, Marshall
2009-01-01
Throughout the history of library automation, the author has seen a steady advancement toward more open systems. In the early days of library automation, when proprietary systems dominated, the need for standards was paramount since other means of inter-operability and data exchange weren't possible. Today's focus on Application Programming…
41 CFR 101-25.101-4 - Supply through indefinite quantity requirement contracts.
Code of Federal Regulations, 2011 CFR
2011-07-01
.... (3) The item is proprietary or so complex in design, function, or operation as to be noncompetitive... Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND... introduced into a supply system), or no advantage accrues doing so; and (b) Industry distribution facilities...
41 CFR 101-25.101-4 - Supply through indefinite quantity requirement contracts.
Code of Federal Regulations, 2010 CFR
2010-07-01
.... (3) The item is proprietary or so complex in design, function, or operation as to be noncompetitive... Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND... introduced into a supply system), or no advantage accrues doing so; and (b) Industry distribution facilities...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-21
... (4) network manager for conversion of proprietary protocol--Staefa brand system--to a non-proprietary... conversion of proprietary protocol--Staefa brand system--to a non-proprietary open source protocol, are not... their scouting process did not locate any domestic manufacturers for these exact or equivalent items. In...
Energy Department Launches National Fuel Cell Technology Evaluation Center
technologies by strengthening data collection from fuel cell systems and components operating under real-world also houses one of the most energy efficient data centers in the world. NFCTEC will use a secure work proprietary hydrogen and fuel cell technologies in real-world operation since 2004. To date, NREL has
Migration of legacy mumps applications to relational database servers.
O'Kane, K C
2001-07-01
An extended implementation of the Mumps language is described that facilitates vendor neutral migration of legacy Mumps applications to SQL-based relational database servers. Implemented as a compiler, this system translates Mumps programs to operating system independent, standard C code for subsequent compilation to fully stand-alone, binary executables. Added built-in functions and support modules extend the native hierarchical Mumps database with access to industry standard, networked, relational database management servers (RDBMS) thus freeing Mumps applications from dependence upon vendor specific, proprietary, unstandardized database models. Unlike Mumps systems that have added captive, proprietary RDMBS access, the programs generated by this development environment can be used with any RDBMS system that supports common network access protocols. Additional features include a built-in web server interface and the ability to interoperate directly with programs and functions written in other languages.
Open-Source Automated Mapping Four-Point Probe.
Chandra, Handy; Allen, Spencer W; Oberloier, Shane W; Bihari, Nupur; Gwamuri, Jephias; Pearce, Joshua M
2017-01-26
Scientists have begun using self-replicating rapid prototyper (RepRap) 3-D printers to manufacture open source digital designs of scientific equipment. This approach is refined here to develop a novel instrument capable of performing automated large-area four-point probe measurements. The designs for conversion of a RepRap 3-D printer to a 2-D open source four-point probe (OS4PP) measurement device are detailed for the mechanical and electrical systems. Free and open source software and firmware are developed to operate the tool. The OS4PP was validated against a wide range of discrete resistors and indium tin oxide (ITO) samples of different thicknesses both pre- and post-annealing. The OS4PP was then compared to two commercial proprietary systems. Results of resistors from 10 to 1 MΩ show errors of less than 1% for the OS4PP. The 3-D mapping of sheet resistance of ITO samples successfully demonstrated the automated capability to measure non-uniformities in large-area samples. The results indicate that all measured values are within the same order of magnitude when compared to two proprietary measurement systems. In conclusion, the OS4PP system, which costs less than 70% of manual proprietary systems, is comparable electrically while offering automated 100 micron positional accuracy for measuring sheet resistance over larger areas.
Integrating medical devices in the operating room using service-oriented architectures.
Ibach, Bastian; Benzko, Julia; Schlichting, Stefan; Zimolong, Andreas; Radermacher, Klaus
2012-08-01
Abstract With the increasing documentation requirements and communication capabilities of medical devices in the operating room, the integration and modular networking of these devices have become more and more important. Commercial integrated operating room systems are mainly proprietary developments using usually proprietary communication standards and interfaces, which reduce the possibility of integrating devices from different vendors. To overcome these limitations, there is a need for an open standardized architecture that is based on standard protocols and interfaces enabling the integration of devices from different vendors based on heterogeneous software and hardware components. Starting with an analysis of the requirements for device integration in the operating room and the techniques used for integrating devices in other industrial domains, a new concept for an integration architecture for the operating room based on the paradigm of a service-oriented architecture is developed. Standardized communication protocols and interface descriptions are used. As risk management is an important factor in the field of medical engineering, a risk analysis of the developed concept has been carried out and the first prototypes have been implemented.
Development and recommendations for a non-proprietary, high-tension, cable end terminal system.
DOT National Transportation Integrated Search
2012-07-01
Cable guardrail systems have been increasing in popularity in recent years due to several perceived benefits over the : commonly used W-beam guardrail. A non-proprietary design was desired as an alternative to the many proprietary designs : available...
A materials accounting system for an IBM PC
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bearse, R.C.; Thomas, R.J.; Henslee, S.P.
1986-01-01
The authors have adapted the Los Alamos MASS accounting system for use on an IBM PC/AT at the Fuels Manufacturing Facility (FMF) at Argonne National Laboratory West (ANL-WEST). Cost of hardware and proprietary software was less than $10,000 per station. The system consists of three stations between which accounting information is transferred using floppy disks accompanying special nuclear material shipments. The programs were implemented in dBASEIII and were compiled using the proprietary software CLIPPER. Modifications to the inventory can be posted in just a few minutes, and operator/computer interaction is nearly instantaneous. After the records are built by the user,more » it takes 4-5 seconds to post the results to the database files. A version of this system was specially adapted and is currently in use at the FMF facility at Argonne National Laboratory. Initial satisfaction is adequate and software and hardware problems are minimal.« less
Guidelines and Standards for Proprietary Schools.
ERIC Educational Resources Information Center
Georgia State Board of Education, Atlanta.
This guide contains information pertaining to Georgia law, rules, regulations, and standards of practice for regulating proprietary schools in Georgia. Section 1 of the guide presents operation guidelines, including definitions, exemptions, general provisions, certificates of approval of schools, and appeals procedures. Section 2 presents minimum…
48 CFR 1352.209-71 - Limitation of future contracting.
Code of Federal Regulations, 2010 CFR
2010-10-01
... towards solution of broadly defined problems. This may encompass research, evaluating technical feasibility, proof of design and test, or engineering of programs not yet approved for acquisition or operation. (iii) “Proprietary Information” means all information designated as proprietary in accordance...
48 CFR 1352.209-71 - Limitation of future contracting.
Code of Federal Regulations, 2011 CFR
2011-10-01
... towards solution of broadly defined problems. This may encompass research, evaluating technical feasibility, proof of design and test, or engineering of programs not yet approved for acquisition or operation. (iii) “Proprietary Information” means all information designated as proprietary in accordance...
Open-Source Automated Mapping Four-Point Probe
Chandra, Handy; Allen, Spencer W.; Oberloier, Shane W.; Bihari, Nupur; Gwamuri, Jephias; Pearce, Joshua M.
2017-01-01
Scientists have begun using self-replicating rapid prototyper (RepRap) 3-D printers to manufacture open source digital designs of scientific equipment. This approach is refined here to develop a novel instrument capable of performing automated large-area four-point probe measurements. The designs for conversion of a RepRap 3-D printer to a 2-D open source four-point probe (OS4PP) measurement device are detailed for the mechanical and electrical systems. Free and open source software and firmware are developed to operate the tool. The OS4PP was validated against a wide range of discrete resistors and indium tin oxide (ITO) samples of different thicknesses both pre- and post-annealing. The OS4PP was then compared to two commercial proprietary systems. Results of resistors from 10 to 1 MΩ show errors of less than 1% for the OS4PP. The 3-D mapping of sheet resistance of ITO samples successfully demonstrated the automated capability to measure non-uniformities in large-area samples. The results indicate that all measured values are within the same order of magnitude when compared to two proprietary measurement systems. In conclusion, the OS4PP system, which costs less than 70% of manual proprietary systems, is comparable electrically while offering automated 100 micron positional accuracy for measuring sheet resistance over larger areas. PMID:28772471
Code of Federal Regulations, 2010 CFR
2010-01-01
... information and proprietary information in the Federal Docket Management System (FDMS)? 11.35 Section 11.35... RULEMAKING PROCEDURES Rulemaking Procedures General § 11.35 Does FAA include sensitive security information and proprietary information in the Federal Docket Management System (FDMS)? (a) Sensitive security...
Code of Federal Regulations, 2014 CFR
2014-01-01
... information and proprietary information in the Federal Docket Management System (FDMS)? 11.35 Section 11.35... RULEMAKING PROCEDURES Rulemaking Procedures General § 11.35 Does FAA include sensitive security information and proprietary information in the Federal Docket Management System (FDMS)? (a) Sensitive security...
Code of Federal Regulations, 2012 CFR
2012-01-01
... information and proprietary information in the Federal Docket Management System (FDMS)? 11.35 Section 11.35... RULEMAKING PROCEDURES Rulemaking Procedures General § 11.35 Does FAA include sensitive security information and proprietary information in the Federal Docket Management System (FDMS)? (a) Sensitive security...
Code of Federal Regulations, 2013 CFR
2013-01-01
... information and proprietary information in the Federal Docket Management System (FDMS)? 11.35 Section 11.35... RULEMAKING PROCEDURES Rulemaking Procedures General § 11.35 Does FAA include sensitive security information and proprietary information in the Federal Docket Management System (FDMS)? (a) Sensitive security...
Code of Federal Regulations, 2011 CFR
2011-01-01
... information and proprietary information in the Federal Docket Management System (FDMS)? 11.35 Section 11.35... RULEMAKING PROCEDURES Rulemaking Procedures General § 11.35 Does FAA include sensitive security information and proprietary information in the Federal Docket Management System (FDMS)? (a) Sensitive security...
42 CFR 489.28 - Special capitalization requirements for HHAs.
Code of Federal Regulations, 2011 CFR
2011-10-01
... free-standing, and proprietary versus non-proprietary status. The determination of the adequacy of the... some cases, an HHA may have all or part of the initial reserve operating funds in cash equivalents. For the purpose of this section, cash equivalents are short-term, highly liquid investments that are...
Adopting Free and Open Source Software (FOSS) in Education
ERIC Educational Resources Information Center
Gupta, Deepty; Surbhi
2018-01-01
Information and Communication Technology (ICT) has provided the better learning opportunities to the present teachers and learners across the world. In the era of internet, many educational resources are free and lot of free softwares are also available. In our country the basic operating system used in educational institutions are proprietary in…
Materials accounting system for an IBM PC
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bearse, R.C.; Thomas, R.J.; Henslee, S.P.
1986-01-01
We have adapted the Los Alamos MASS accounting system for use on an IBM PC/AT at the Fuels Manufacturing Facility (FMF) at Argonne National Laboratory-West (ANL-WEST) in Idaho Falls, Idaho. Cost of hardware and proprietary software was less than $10,000 per station. The system consists of three stations between which accounting information is transferred using floppy disks accompanying special nuclear material shipments. The programs were implemented in dBASEIII and were compiled using the proprietary software CLIPPER. Modifications to the inventory can be posted in just a few minutes, and operator/computer interaction is nearly instantaneous. After the records are built bymore » the user, it takes 4 to 5 seconds to post the results to the database files. A version of this system was specially adapted and is currently in use at the FMF facility at Argonne National Laboratory in Idaho Falls. Initial satisfaction is adequate and software and hardware problems are minimal.« less
ERIC Educational Resources Information Center
Congress of the U. S., Washington, DC. House Committee on Government Operations.
The Federal government has become increasingly involved in the proprietary vocational school industry by way of loans and grants to students, veterans benefits, contracts for the provision of training between schools and rehabilitation and other government agencies, other financial relationships, and associated supervisory and regulatory…
14 CFR 91.875 - Annual progress reports.
Code of Federal Regulations, 2013 CFR
2013-01-01
...) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Operating Noise Limits § 91... report, that specific planning data be considered proprietary. (e) If an operator's actions during any...
14 CFR 91.875 - Annual progress reports.
Code of Federal Regulations, 2011 CFR
2011-01-01
...) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Operating Noise Limits § 91... report, that specific planning data be considered proprietary. (e) If an operator's actions during any...
14 CFR 91.875 - Annual progress reports.
Code of Federal Regulations, 2010 CFR
2010-01-01
...) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Operating Noise Limits § 91... report, that specific planning data be considered proprietary. (e) If an operator's actions during any...
14 CFR 91.875 - Annual progress reports.
Code of Federal Regulations, 2012 CFR
2012-01-01
...) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Operating Noise Limits § 91... report, that specific planning data be considered proprietary. (e) If an operator's actions during any...
14 CFR 91.875 - Annual progress reports.
Code of Federal Regulations, 2014 CFR
2014-01-01
...) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Operating Noise Limits § 91... report, that specific planning data be considered proprietary. (e) If an operator's actions during any...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-17
... practices and display execution and trading systems. While the examination is primarily dedicated to topics related to proprietary trading, the Series 56 examination also covers a few general concepts relating to... on competition, and, by its terms, does not become operative for 30 days from the date on which it...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-13
... filing is to amend the Schedule to reflect new transaction pricing that will become operative on August 4... customer order flow. Currently, all Firm proprietary manual transactions are charged $0.18 per contract and... transaction involving a Firm's proprietary trading account that has a customer of that same Firm on the contra...
ERIC Educational Resources Information Center
Congress of the U. S., Washington, DC. House Committee on Government Operations.
The Special Studies Subcommittee, conducting an inquiry into proprietary vocational schools, explored ways to limit the misuse of vocational training, to minimize the waste of government funds, and to correct the abuses of misleading advertising, unethical recruiting, and the acceptance of unqualified students. Statements, presented or submitted,…
Continued development of a non-proprietary, high-tension, cable end terminal system.
DOT National Transportation Integrated Search
2016-04-29
A non-proprietary, cable guardrail system is currently under development for the Midwest States Pooled Fund Program. : A cable guardrail end terminal was necessary to accompany the cable guardrail system. The objective of this research : project was ...
2016-04-30
software (OSS) and proprietary (CSS) software elements or remote services (Scacchi, 2002, 2010), eventually including recent efforts to support Web ...specific platforms, including those operating on secured Web /mobile devices. Common Development Technology provides AC development tools and common...transition to OA systems and OSS software elements, specifically for Web and Mobile devices within the realm of C3CB. OA, Open APIs, OSS, and CSS OA
means of increasing the life of aircraft gas turbine compressor rotor blades and stator vanes . Two proprietary erosion resistant coating systems... engine tests as the two most promising systems for doubling compressor airfoil lives. An Air Force Sponsored program to evaluate the applicability of...Helicopter engine erosion has become a severe problem in S. E. Asia because of extensive operations in sand and dust. Hard coatings offer a potential
NASA Astrophysics Data System (ADS)
Bieniek, A.; Graba, M.; Prażnowski, K.
2016-09-01
The paper presents results of research on the effect of frequency control signal on the course selected operating parameters of the continuously variable transmission CVT. The study used a gear Fuji Hyper M6 with electro-hydraulic control system and proprietary software for control and data acquisition developed in LabView environment.
[Comprehensive system integration and networking in operating rooms].
Feußner, H; Ostler, D; Kohn, N; Vogel, T; Wilhelm, D; Koller, S; Kranzfelder, M
2016-12-01
A comprehensive surveillance and control system integrating all devices and functions is a precondition for realization of the operating room of the future. Multiple proprietary integrated operation room systems are currently available with a central user interface; however, they only cover a relatively small part of all functionalities. Internationally, there are at least three different initiatives to promote a comprehensive systems integration and networking in the operating room: the Japanese smart cyber operating theater (SCOT), the American medical device plug-and-play interoperability program (MDPnP) and the German secure and dynamic networking in operating room and hospital (OR.NET) project supported by the Federal Ministry of Education and Research. Within the framework of the internationally advanced OR.NET project, prototype solution approaches were realized, which make short-term and mid-term comprehensive data retrieval systems probable. An active and even autonomous control of the medical devices by the surveillance and control system (closed loop) is expected only in the long run due to strict regulatory barriers.
The Secret History of Proprietary Legal Education: The Case of the Houston Law School, 1919-1945.
ERIC Educational Resources Information Center
Steiner, Mark E.
1997-01-01
Examines the history of the Houston Law School (Texas), a part-time night school that operated from 1919-1945 and was part of a brief period of ascendence for proprietary law schools. Discusses its competition with another institution, shifts in standards and enrollments, and other factors leading to its decline. Notes parallels between this…
Mold Heating and Cooling Pump Package Operator Interface Controls Upgrade
DOE Office of Scientific and Technical Information (OSTI.GOV)
Josh A. Salmond
2009-08-07
The modernization of the Mold Heating and Cooling Pump Package Operator Interface (MHC PP OI) consisted of upgrading the antiquated single board computer with a proprietary operating system to off-the-shelf hardware and off-the-shelf software with customizable software options. The pump package is the machine interface between a central heating and cooling system that pumps heat transfer fluid through an injection or compression mold base on a local plastic molding machine. The operator interface provides the intelligent means of controlling this pumping process. Strict temperature control of a mold allows the production of high quality parts with tight tolerances and lowmore » residual stresses. The products fabricated are used on multiple programs.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nawrocki, G.J.; Seaver, C.L.; Kowalkowski, J.B.
As controls needs at the Advanced Photon Source matured from an installation phase to an operational phase, the need to monitor the existing conventional facilities control system with the EPICS-based accelerator control system was realized. This existing conventional facilities control network is based on a proprietary system from Johnson Controls called Metasys. Initially read-only monitoring of the Metasys parameters will be provided; however, the ability for possible future expansion to full control is available. This paper describes a method of using commercially available hardware and existing EPICS software as a bridge between the Metasys and EPICS control systems.
Preparing a scientific manuscript in Linux: Today's possibilities and limitations.
Tchantchaleishvili, Vakhtang; Schmitto, Jan D
2011-10-22
Increasing number of scientists are enthusiastic about using free, open source software for their research purposes. Authors' specific goal was to examine whether a Linux-based operating system with open source software packages would allow to prepare a submission-ready scientific manuscript without the need to use the proprietary software. Preparation and editing of scientific manuscripts is possible using Linux and open source software. This letter to the editor describes key steps for preparation of a publication-ready scientific manuscript in a Linux-based operating system, as well as discusses the necessary software components. This manuscript was created using Linux and open source programs for Linux.
Automatic system for computer program documentation
NASA Technical Reports Server (NTRS)
Simmons, D. B.; Elliott, R. W.; Arseven, S.; Colunga, D.
1972-01-01
Work done on a project to design an automatic system for computer program documentation aids was made to determine what existing programs could be used effectively to document computer programs. Results of the study are included in the form of an extensive bibliography and working papers on appropriate operating systems, text editors, program editors, data structures, standards, decision tables, flowchart systems, and proprietary documentation aids. The preliminary design for an automated documentation system is also included. An actual program has been documented in detail to demonstrate the types of output that can be produced by the proposed system.
A VME-based software trigger system using UNIX processors
NASA Astrophysics Data System (ADS)
Atmur, Robert; Connor, David F.; Molzon, William
1997-02-01
We have constructed a distributed computing platform with eight processors to assemble and filter data from digitization crates. The filtered data were transported to a tape-writing UNIX computer via ethernet. Each processor ran a UNIX operating system and was installed in its own VME crate. Each VME crate contained dual-port memories which interfaced with the digitizers. Using standard hardware and software (VME and UNIX) allows us to select from a wide variety of non-proprietary products and makes upgrades simpler, if they are necessary.
User's Manual for the Naval Interactive Data Analysis System-Climatologies (NIDAS-C), Version 2.0
NASA Technical Reports Server (NTRS)
Abbott, Clifton
1996-01-01
This technical note provides the user's manual for the NIDAS-C system developed for the naval oceanographic office. NIDAS-C operates using numerous oceanographic data categories stored in an installed version of the Naval Environmental Operational Nowcast System (NEONS), a relational database management system (rdbms) which employs the ORACLE proprietary rdbms engine. Data management, configuration, and control functions for the supporting rdbms are performed externally. NIDAS-C stores and retrieves data to/from the rdbms but exercises no direct internal control over the rdbms or its configuration. Data is also ingested into the rdbms, for use by NIDAS-C, by external data acquisition processes. The data categories employed by NIDAS-C are as follows: Bathymetry - ocean depth at
Ultra-wide Range Gamma Detector System for Search and Locate Operations
DOE Office of Scientific and Technical Information (OSTI.GOV)
Odell, D. Mackenzie Odell; Harpring, Larry J.; Moore, Frank S. Jr.
2005-10-26
Collecting debris samples following a nuclear event requires that operations be conducted from a considerable stand-off distance. An ultra-wide range gamma detector system has been constructed to accomplish both long range radiation search and close range hot sample collection functions. Constructed and tested on a REMOTEC Andros platform, the system has demonstrated reliable operation over six orders of magnitude of gamma dose from 100's of uR/hr to over 100 R/hr. Functional elements include a remotely controlled variable collimator assembly, a NaI(Tl)/photomultiplier tube detector, a proprietary digital radiation instrument, a coaxially mounted video camera, a digital compass, and both local andmore » remote control computers with a user interface designed for long range operations. Long range sensitivity and target location, as well as close range sample selection performance are presented.« less
48 CFR 703.104-5 - Disclosure, protection, and marking of proprietary and source information.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Disclosure, protection, and marking of proprietary and source information. 703.104-5 Section 703.104-5 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT GENERAL IMPROPER BUSINESS PRACTICES AND PERSONAL...
Evaluation of Open-Source Hard Real Time Software Packages
NASA Technical Reports Server (NTRS)
Mattei, Nicholas S.
2004-01-01
Reliable software is, at times, hard to find. No piece of software can be guaranteed to work in every situation that may arise during its use here at Glenn Research Center or in space. The job of the Software Assurance (SA) group in the Risk Management Office is to rigorously test the software in an effort to ensure it matches the contract specifications. In some cases the SA team also researches new alternatives for selected software packages. This testing and research is an integral part of the department of Safety and Mission Assurance. Real Time operation in reference to a computer system is a particular style of handing the timing and manner with which inputs and outputs are handled. A real time system executes these commands and appropriate processing within a defined timing constraint. Within this definition there are two other classifications of real time systems: hard and soft. A soft real time system is one in which if the particular timing constraints are not rigidly met there will be no critical results. On the other hand, a hard real time system is one in which if the timing constraints are not met the results could be catastrophic. An example of a soft real time system is a DVD decoder. If the particular piece of data from the input is not decoded and displayed to the screen at exactly the correct moment nothing critical will become of it, the user may not even notice it. However, a hard real time system is needed to control the timing of fuel injections or steering on the Space Shuttle; a delay of even a fraction of a second could be catastrophic in such a complex system. The current real time system employed by most NASA projects is Wind River's VxWorks operating system. This is a proprietary operating system that can be configured to work with many of NASA s needs and it provides very accurate and reliable hard real time performance. The down side is that since it is a proprietary operating system it is also costly to implement. The prospect of replacing this somewhat costly implementation is the focus of one of the SA group s current research projects. The explosion of open source software in the last ten years has led to the development of a multitude of software solutions which were once only produced by major corporations. The benefits of these open projects include faster release and bug patching cycles as well as inexpensive if not free software solutions. The main packages for hard real time solutions under Linux are Real Time Application Interface (RTAI) and two varieties of Real Time Linux (RTL), RTLFree and RTLPro. During my time here at NASA I have been testing various hard real time solutions operating as layers on the Linux Operating System. All testing is being run on an Intel SBC 2590 which is a common embedded hardware platform. The test plan was provided to me by the Software Assurance group at the start of my internship and my job has been to test the systems by developing and executing the test cases on the hardware. These tests are constructed so that the Software Assurance group can get hard test data for a comparison between the open source and proprietary implementations of hard real time solutions.
Real time data acquisition for expert systems in Unix workstations at Space Shuttle Mission Control
NASA Technical Reports Server (NTRS)
Muratore, John F.; Heindel, Troy A.; Murphy, Terri B.; Rasmussen, Arthur N.; Gnabasik, Mark; Mcfarland, Robert Z.; Bailey, Samuel A.
1990-01-01
A distributed system of proprietary engineering-class workstations is incorporated into NASA's Space Shuttle Mission-Control Center to increase the automation of mission control. The Real-Time Data System (RTDS) allows the operator to utilize expert knowledge in the display program for system modeling and evaluation. RTDS applications are reviewed including: (1) telemetry-animated communications schematics; (2) workstation displays of systems such as the Space Shuttle remote manipulator; and (3) a workstation emulation of shuttle flight instrumentation. The hard and soft real-time constraints are described including computer data acquisition, and the support techniques for the real-time expert systems include major frame buffers for logging and distribution as well as noise filtering. The incorporation of the workstations allows smaller programming teams to implement real-time telemetry systems that can improve operations and flight testing.
Preparing a scientific manuscript in Linux: Today's possibilities and limitations
2011-01-01
Background Increasing number of scientists are enthusiastic about using free, open source software for their research purposes. Authors' specific goal was to examine whether a Linux-based operating system with open source software packages would allow to prepare a submission-ready scientific manuscript without the need to use the proprietary software. Findings Preparation and editing of scientific manuscripts is possible using Linux and open source software. This letter to the editor describes key steps for preparation of a publication-ready scientific manuscript in a Linux-based operating system, as well as discusses the necessary software components. This manuscript was created using Linux and open source programs for Linux. PMID:22018246
Real time UNIX in embedded control-a case study within the context of LynxOS
NASA Astrophysics Data System (ADS)
Kleines, H.; Zwoll, K.
1996-02-01
Intelligent communication controllers for a layered protocol profile are a typical example of an embedded control application, where the classical approach for the software development is based on a proprietary real-time operating system kernel under which the individual layers are implemented as tasks. Based on the exemplary implementation of a derivative of MAP 3.0, an unusual and innovative approach is presented, where the protocol software is implemented under the UNIX-compatible real-time operating system LynxOS. The overall design of the embedded control application is presented under a more general view and economical implications as well as aspects of the development environment and performance are discussed
Janß, Armin; Thorn, Johannes; Schmitz, Malte; Mildner, Alexander; Dell'Anna-Pudlik, Jasmin; Leucker, Martin; Radermacher, Klaus
2018-02-23
Nowadays, only closed and proprietary integrated operating room systems (IORS) from big manufacturers are available on the market. Hence, the interconnection of components from third-party vendors is only possible with increased time and costs. In the context of the German Federal Ministry of Education and Research (BMBF)-funded project OR.NET (2012-2016), the open integration of medical devices from different manufacturers was addressed. An integrated operating theater based on the open communication standard IEEE 11073 shall give clinical operators the opportunity to choose medical devices independently of the manufacturer. This approach would be advantageous especially for hospital operators and small- and medium-sized enterprises (SME) of medical devices. Actual standards and concepts regarding technical feasibility and the approval process do not cope with the requirements for a modular integration of medical devices in the operating room (OR), based on an open communication standard. Therefore, innovative approval strategies and corresponding certification and test procedures, which cover actual legal and normative standards, have to be developed in order to support the future risk management and the usability engineering process of open integrated medical devices in the OR. The use of standardized device and service profiles and a three-step testing procedure, including conformity, interoperability and integration tests are described in this paper and shall support the manufacturers to integrate their medical devices without disclosing the medical devices' risk analysis and related confidential expertise or proprietary information.
Web-based multi-channel analyzer
Gritzo, Russ E.
2003-12-23
The present invention provides an improved multi-channel analyzer designed to conveniently gather, process, and distribute spectrographic pulse data. The multi-channel analyzer may operate on a computer system having memory, a processor, and the capability to connect to a network and to receive digitized spectrographic pulses. The multi-channel analyzer may have a software module integrated with a general-purpose operating system that may receive digitized spectrographic pulses for at least 10,000 pulses per second. The multi-channel analyzer may further have a user-level software module that may receive user-specified controls dictating the operation of the multi-channel analyzer, making the multi-channel analyzer customizable by the end-user. The user-level software may further categorize and conveniently distribute spectrographic pulse data employing non-proprietary, standard communication protocols and formats.
Improving Software Sustainability: Lessons Learned from Profiles in Science.
Gallagher, Marie E
2013-01-01
The Profiles in Science® digital library features digitized surrogates of historical items selected from the archival collections of the U.S. National Library of Medicine as well as collaborating institutions. In addition, it contains a database of descriptive, technical and administrative metadata. It also contains various software components that allow creation of the metadata, management of the digital items, and access to the items and metadata through the Profiles in Science Web site [1]. The choices made building the digital library were designed to maximize the sustainability and long-term survival of all of the components of the digital library [2]. For example, selecting standard and open digital file formats rather than proprietary formats increases the sustainability of the digital files [3]. Correspondingly, using non-proprietary software may improve the sustainability of the software--either through in-house expertise or through the open source community. Limiting our digital library software exclusively to open source software or to software developed in-house has not been feasible. For example, we have used proprietary operating systems, scanning software, a search engine, and office productivity software. We did this when either lack of essential capabilities or the cost-benefit trade-off favored using proprietary software. We also did so knowing that in the future we would need to replace or upgrade some of our proprietary software, analogous to migrating from an obsolete digital file format to a new format as the technological landscape changes. Since our digital library's start in 1998, all of its software has been upgraded or replaced, but the digitized items have not yet required migration to other formats. Technological changes that compelled us to replace proprietary software included the cost of product licensing, product support, incompatibility with other software, prohibited use due to evolving security policies, and product abandonment. Sometimes these changes happen on short notice, so we continually monitor our library's software for signs of endangerment. We have attempted to replace proprietary software with suitable in-house or open source software. When the replacement involves a standalone piece of software with a nearly equivalent version, such as replacing a commercial HTTP server with an open source HTTP server, the replacement is straightforward. Recently we replaced software that functioned not only as our search engine but also as the backbone of the architecture of our Web site. In this paper, we describe the lessons learned and the pros and cons of replacing this software with open source software.
Cable-to-post attachments for a non-proprietary high-tension cable barrier - phase II.
DOT National Transportation Integrated Search
2015-06-01
The research objectives reported herein were based on further development of cable-to-post attachment hardware for use in : the non-proprietary high-tension cable barrier system. Specifically, this project aimed to develop and evaluate alternative : ...
Real time UNIX in embedded control -- A case study within context of LynxOS
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kleines, H.; Zwoll, K.
1996-02-01
Intelligent communication controllers for a layered protocol profile are a typical example of an embedded control application, where the classical approach for the software development is based on a proprietary real-time operating system kernel under which the individual layers are implemented as tasks. Based on the exemplary implementation of a derivative of MAP 3.0, an unusual and innovative approach is presented, where the protocol software is implemented under the UNIX-compatible real-time operating system LynxOS. The overall design of the embedded control application is presented under a more general view and economical implications as well as aspects of the development environmentmore » and performance are discussed.« less
RFID Technology for Continuous Monitoring of Physiological Signals in Small Animals.
Volk, Tobias; Gorbey, Stefan; Bhattacharyya, Mayukh; Gruenwald, Waldemar; Lemmer, Björn; Reindl, Leonhard M; Stieglitz, Thomas; Jansen, Dirk
2015-02-01
Telemetry systems enable researchers to continuously monitor physiological signals in unrestrained, freely moving small rodents. Drawbacks of common systems are limited operation time, the need to house the animals separately, and the necessity of a stable communication link. Furthermore, the costs of the typically proprietary telemetry systems reduce the acceptance. The aim of this paper is to introduce a low-cost telemetry system based on common radio frequency identification technology optimized for battery-independent operational time, good reusability, and flexibility. The presented implant is equipped with sensors to measure electrocardiogram, arterial blood pressure, and body temperature. The biological signals are transmitted as digital data streams. The device is able of monitoring several freely moving animals housed in groups with a single reader station. The modular concept of the system significantly reduces the costs to monitor multiple physiological functions and refining procedures in preclinical research.
NASA Technical Reports Server (NTRS)
Hueschen, Richard M.
2011-01-01
A six degree-of-freedom, flat-earth dynamics, non-linear, and non-proprietary aircraft simulation was developed that is representative of a generic mid-sized twin-jet transport aircraft. The simulation was developed from a non-proprietary, publicly available, subscale twin-jet transport aircraft simulation using scaling relationships and a modified aerodynamic database. The simulation has an extended aerodynamics database with aero data outside the normal transport-operating envelope (large angle-of-attack and sideslip values). The simulation has representative transport aircraft surface actuator models with variable rate-limits and generally fixed position limits. The simulation contains a generic 40,000 lb sea level thrust engine model. The engine model is a first order dynamic model with a variable time constant that changes according to simulation conditions. The simulation provides a means for interfacing a flight control system to use the simulation sensor variables and to command the surface actuators and throttle position of the engine model.
KSOS Secure Unix Verification Plan (Kernelized Secure Operating System).
1980-12-01
shall be handled as proprietary information untii 5 Apri 1978. After that time, the Government m-. distribute the document as it sees fit. UNIX and PWB...Accession For P-’(’ T.’i3 :- NTI G.;:’... &I : " \\ " Y: Codes mdlc/or 71!O lii WDL-TR7809 KSOS VERIFICATION PLAN SECTION I INTRODUCTION "’The purpose...funding, additional tools may be available by the time they are needed for FSOS verification. We intend to use the best available technology in
1993-01-26
by an optical pyrometer that views the inside of the susceptor through a sapphire light pipe. The gas delivery system is of standard commercial design ...of the operating conditions for MESFET growth. 2.2.2 Modifications to the Apparatus for MIMIC Spire designed and installed a bell jar capable of...withstanding, without water cooling, the 500 to 1 100’C temperatures needed for MOCVD growth. The bell jar features a flow disrupter of proprietary design
The case for open-source software in drug discovery.
DeLano, Warren L
2005-02-01
Widespread adoption of open-source software for network infrastructure, web servers, code development, and operating systems leads one to ask how far it can go. Will "open source" spread broadly, or will it be restricted to niches frequented by hopeful hobbyists and midnight hackers? Here we identify reasons for the success of open-source software and predict how consumers in drug discovery will benefit from new open-source products that address their needs with increased flexibility and in ways complementary to proprietary options.
On architecting and composing engineering information services to enable smart manufacturing
Ivezic, Nenad; Srinivasan, Vijay
2016-01-01
Engineering information systems play an important role in the current era of digitization of manufacturing, which is a key component to enable smart manufacturing. Traditionally, these engineering information systems spanned the lifecycle of a product by providing interoperability of software subsystems through a combination of open and proprietary exchange of data. But research and development efforts are underway to replace this paradigm with engineering information services that can be composed dynamically to meet changing needs in the operation of smart manufacturing systems. This paper describes the opportunities and challenges in architecting such engineering information services and composing them to enable smarter manufacturing. PMID:27840595
Motivation for a High Explosive Testing Program in South Africa
2015-12-04
following): Contractor Performance Evaluation Foreign Government Information Administrative or Operational Use Specific Authority ~ Proprietary lnformati...Software Document~tion Administrative or Operational Use B Foreign Governmen Information 0 D. Distribution authorized to the Department of Defense...and U.S. DoD Contractors only (check the following): 0 § Foreign Government Information Critical Technology Administrative or Operational Use B
DOE Office of Scientific and Technical Information (OSTI.GOV)
Beaver, Justin M; Borges, Raymond Charles; Buckner, Mark A
Critical infrastructure Supervisory Control and Data Acquisition (SCADA) systems were designed to operate on closed, proprietary networks where a malicious insider posed the greatest threat potential. The centralization of control and the movement towards open systems and standards has improved the efficiency of industrial control, but has also exposed legacy SCADA systems to security threats that they were not designed to mitigate. This work explores the viability of machine learning methods in detecting the new threat scenarios of command and data injection. Similar to network intrusion detection systems in the cyber security domain, the command and control communications in amore » critical infrastructure setting are monitored, and vetted against examples of benign and malicious command traffic, in order to identify potential attack events. Multiple learning methods are evaluated using a dataset of Remote Terminal Unit communications, which included both normal operations and instances of command and data injection attack scenarios.« less
22 CFR 201.22 - Procurement under public sector procedures.
Code of Federal Regulations, 2010 CFR
2010-04-01
... procurement. Purchasing by brand or trade name or by a restrictive specification (proprietary procurement) may... by operating personnel, can be achieved through standardizing on a particular brand; (2...
NASA Technical Reports Server (NTRS)
Mckay, Charles; Auty, David; Rogers, Kathy
1987-01-01
System interface sets (SIS) for large, complex, non-stop, distributed systems are examined. The SIS of the Space Station Program (SSP) was selected as the focus of this study because an appropriate virtual interface specification of the SIS is believed to have the most potential to free the project from four life cycle tyrannies which are rooted in a dependance on either a proprietary or particular instance of: operating systems, data management systems, communications systems, and instruction set architectures. The static perspective of the common Ada programming support environment interface set (CAIS) and the portable common execution environment (PCEE) activities are discussed. Also, the dynamic perspective of the PCEE is addressed.
14 CFR 375.26 - Waiver of sovereign immunity.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Waiver of sovereign immunity. 375.26... Applicable § 375.26 Waiver of sovereign immunity. Owners and operators of aircraft operated under this part that are engaged in proprietary of commercial activities waive any defense of sovereign immunity from...
14 CFR 375.26 - Waiver of sovereign immunity.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Waiver of sovereign immunity. 375.26... Applicable § 375.26 Waiver of sovereign immunity. Owners and operators of aircraft operated under this part that are engaged in proprietary of commercial activities waive any defense of sovereign immunity from...
14 CFR 375.26 - Waiver of sovereign immunity.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Waiver of sovereign immunity. 375.26... Applicable § 375.26 Waiver of sovereign immunity. Owners and operators of aircraft operated under this part that are engaged in proprietary of commercial activities waive any defense of sovereign immunity from...
14 CFR 375.26 - Waiver of sovereign immunity.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Waiver of sovereign immunity. 375.26... Applicable § 375.26 Waiver of sovereign immunity. Owners and operators of aircraft operated under this part that are engaged in proprietary of commercial activities waive any defense of sovereign immunity from...
14 CFR 375.26 - Waiver of sovereign immunity.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Waiver of sovereign immunity. 375.26... Applicable § 375.26 Waiver of sovereign immunity. Owners and operators of aircraft operated under this part that are engaged in proprietary of commercial activities waive any defense of sovereign immunity from...
MASH test nos. 3-11 and 3-10 on a non-proprietary cable median barrier.
DOT National Transportation Integrated Search
2016-05-17
The Midwest States Pooled Fund has been developing a new non-proprietary cable median barrier. This system : incorporates four evenly spaced cables, Midwest Weak Posts spaced at 8 to 16 ft (2.4 to 4.9 m) intervals, and a bolted, : tabbed bracket to a...
ERIC Educational Resources Information Center
Stalker, Joshua Dylan
2012-01-01
The protection of proprietary information that users print from their information systems is a significant and relevant concern in the field of information security to both researchers and practitioners. Information security researchers have repeatedly indicated that human behaviors and perception are important factors influencing the information…
MASH test nos. 3-17 and 3-11 on a non-proprietary cable median barrier.
DOT National Transportation Integrated Search
2015-11-01
The Midwest States Pooled Fund has been developing a new design for a non-proprietary high-tension cable median barrier. This new system incorporates four evenly spaced cables, Midwest Weak Posts (MWPs) spaced at 8 to 16 ft (2.4 to 4.9 m) intervals, ...
SEASAT - A candidate ocean industry economic verification experiments
NASA Technical Reports Server (NTRS)
Miller, B. P.
1976-01-01
The economic benefits of an operational SEASAT system are discussed in the areas of marine transportation, offshore oil and natural gas exploration and development, ocean fishing, and Arctic operations. A description of the candidate economic verification experiments which could be performed with SEASAT-A is given. With the exception of the area of Arctic operations, experiments have been identified in each of the areas of ocean based activity that are expected to show an economic impact from the use of operational SEASAT data. Experiments have been identified in the areas of the offshore oil and natural gas industry, as well as ice monitoring and coastal zone applications. Emphasis has been placed on the identification and the development of those experiments which meet criteria for: (1) end user participation; (2) SEASAT-A data utility; (3) measurability of operational parameters to demonstrate economic effect; and (4) non-proprietary nature of results.
Crossing the barrier between the laboratory working model and the practicable production model
NASA Astrophysics Data System (ADS)
Curby, William A.
1992-12-01
Transforming apparatus that has developed into a successfully working laboratory system into a system that is ready, or nearly ready for production, distribution and general use is not always accomplished in a cost effective or timely fashion. Several design elements must be considered interactively during the planning, construction, use and servicing of the final production form of the system. The basic design elements are: Operating Specifications, Reliability Factors, Safety Factors, Precision Limits, Accuracy Limits, Uniformity Factors, Cost Limits and Calibration Requirements. Secondary elements including: Human Engineering, Documentation, Training, Maintenance, Proprietary Rights, Protection, Marketing, Replacement of Parts, and Packing and Shipping must also be considered during the transition.
Recent Developments in Fibers for Telecommunications
NASA Astrophysics Data System (ADS)
Caronna, V.; Cocchini, F.; Collaro, A.; Cuomo, D.; Ruzzier, M.; Schiaffo, A.; Terruzzi, L.; Valls, A.
Formerly known as Pirelli Cables and Systems, Prysmian Cables & Systems was founded in 2005, incorporating all previous Pirelli assets: "same knowledge, different names." Established in 1879, the company has more than 50 factories worldwide, operating in energy and telecommunications sectors. The main fiber manufacturing facility, Fibre Ottiche Sud (FOS), located in Italy, is operating since 1984 using the outside vapor deposition (OVD) technology and adopting today a proprietary coating system, Neon Plus. More than 40 Mkm of fibers produced in all Prysmian factories have been installed worldwide until now. Research activities are extensively carried out both in the headquarters based in Milan, Italy, and in several developments in different factories. This article will present the more noticeable results achieved in the past few years in developing Prysmian products out of its different activities in telecommunications, specifically in the optical fiber sector, while leaving to published papers the description of developments in cable design and connectivity products [1, 2].
High Efficiency and Low Cost Thermal Energy Storage System
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sienicki, James J.; Lv, Qiuping; Moisseytsev, Anton
BgtL, LLC (BgtL) is focused on developing and commercializing its proprietary compact technology for processes in the energy sector. One such application is a compact high efficiency Thermal Energy Storage (TES) system that utilizes the heat of fusion through phase change between solid and liquid to store and release energy at high temperatures and incorporate state-of-the-art insulation to minimize heat dissipation. BgtL’s TES system would greatly improve the economics of existing nuclear and coal-fired power plants by allowing the power plant to store energy when power prices are low and sell power into the grid when prices are high. Comparedmore » to existing battery storage technology, BgtL’s novel thermal energy storage solution can be significantly less costly to acquire and maintain, does not have any waste or environmental emissions, and does not deteriorate over time; it can keep constant efficiency and operates cleanly and safely. BgtL’s engineers are experienced in this field and are able to design and engineer such a system to a specific power plant’s requirements. BgtL also has a strong manufacturing partner to fabricate the system such that it qualifies for an ASME code stamp. BgtL’s vision is to be the leading provider of compact systems for various applications including energy storage. BgtL requests that all technical information about the TES designs be protected as proprietary information. To honor that request, only non-proprietay summaries are included in this report.« less
Software To Secure Distributed Propulsion Simulations
NASA Technical Reports Server (NTRS)
Blaser, Tammy M.
2003-01-01
Distributed-object computing systems are presented with many security threats, including network eavesdropping, message tampering, and communications middleware masquerading. NASA Glenn Research Center, and its industry partners, has taken an active role in mitigating the security threats associated with developing and operating their proprietary aerospace propulsion simulations. In particular, they are developing a collaborative Common Object Request Broker Architecture (CORBA) Security (CORBASec) test bed to secure their distributed aerospace propulsion simulations. Glenn has been working with its aerospace propulsion industry partners to deploy the Numerical Propulsion System Simulation (NPSS) object-based technology. NPSS is a program focused on reducing the cost and time in developing aerospace propulsion engines
Microreactor Development for Martian In-Situ Propellant Production
DOE Office of Scientific and Technical Information (OSTI.GOV)
Holladay, Jamie D.; Brooks, Kriston P.; Wegeng, Robert S.
2007-01-30
The second part of the Martian In-situ Propellant Production (MIPPS) system reviews the development of the Sabatier Reactor (SR). The microchannel SR had integrated cooling channels as well as reaction channels. It was <100cc in volume. The reactor utilized a proprietary catalyst. When operated at 400oC 70-80% CO2 conversion was achieved which enabled ~0.0125 kg CH4/hr production, or 1/8th the target mission. The modular design of the microchannel reactors would enable simple scale up to full scale production for the proposed mission.
14 CFR 420.41 - License to operate a launch site-general.
Code of Federal Regulations, 2010 CFR
2010-01-01
... does it confer any proprietary, property, or exclusive right in the use of airspace or outer space. ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false License to operate a launch site-general. 420.41 Section 420.41 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION...
14 CFR 420.41 - License to operate a launch site-general.
Code of Federal Regulations, 2011 CFR
2011-01-01
... does it confer any proprietary, property, or exclusive right in the use of airspace or outer space. ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false License to operate a launch site-general. 420.41 Section 420.41 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION...
14 CFR 420.41 - License to operate a launch site-general.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false License to operate a launch site-general. 420.41 Section 420.41 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION... regulations; nor does it confer any proprietary, property, or exclusive right in the use of airspace or outer...
14 CFR 420.41 - License to operate a launch site-general.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false License to operate a launch site-general. 420.41 Section 420.41 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION... regulations; nor does it confer any proprietary, property, or exclusive right in the use of airspace or outer...
14 CFR 420.41 - License to operate a launch site-general.
Code of Federal Regulations, 2012 CFR
2012-01-01
... does it confer any proprietary, property, or exclusive right in the use of airspace or outer space. ... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false License to operate a launch site-general. 420.41 Section 420.41 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION...
A flexible, open, decentralized system for digital pathology networks.
Schuler, Robert; Smith, David E; Kumaraguruparan, Gowri; Chervenak, Ann; Lewis, Anne D; Hyde, Dallas M; Kesselman, Carl
2012-01-01
High-resolution digital imaging is enabling digital archiving and sharing of digitized microscopy slides and new methods for digital pathology. Collaborative research centers, outsourced medical services, and multi-site organizations stand to benefit from sharing pathology data in a digital pathology network. Yet significant technological challenges remain due to the large size and volume of digitized whole slide images. While information systems do exist for managing local pathology laboratories, they tend to be oriented toward narrow clinical use cases or offer closed ecosystems around proprietary formats. Few solutions exist for networking digital pathology operations. Here we present a system architecture and implementation of a digital pathology network and share results from a production system that federates major research centers.
A Flexible, Open, Decentralized System for Digital Pathology Networks
SMITH, David E.; KUMARAGURUPARAN, Gowri; CHERVENAK, Ann; LEWIS, Anne D.; HYDE, Dallas M.; KESSELMAN, Carl
2014-01-01
High-resolution digital imaging is enabling digital archiving and sharing of digitized microscopy slides and new methods for digital pathology. Collaborative research centers, outsourced medical services, and multi-site organizations stand to benefit from sharing pathology data in a digital pathology network. Yet significant technological challenges remain due to the large size and volume of digitized whole slide images. While information systems do exist for managing local pathology laboratories, they tend to be oriented toward narrow clinical use cases or offer closed ecosystems around proprietary formats. Few solutions exist for networking digital pathology operations. Here we present a system architecture and implementation of a digital pathology network and share results from a production system that federates major research centers. PMID:22941985
New controller for high voltage converter modulator at spallation neutron source
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wezensky, Mark W; Brown, David L; Lee, Sung-Woo
2017-01-01
The Spallation Neutron Source (SNS) has developed a new control system for the High Voltage Convertor Modulator (HVCM) at the SNS to replace the original control system which is approaching obsolescence. The original system was based on controllers for similar high voltage systems that were already in use [1]. The new controller, based on National Instruments PXI/FlexRIO Field Programmable Gate Array (FPGA) platform, offers enhancements such as modular construction, flexibility and non-proprietary software. The new controller also provides new capabilities like various methods for modulator pulse flattening, waveform capture, and first fault detection. This paper will discuss the design ofmore » the system, including the human machine interface, based on lessons learned at the SNS and other projects. It will also discuss performance and other issues related to its operation in an accelerator facility which requires high availability. To date, 73% of the operational HVCMs have been upgraded to with the new controller, and the remainder are scheduled for completion by mid-2017.« less
DOT National Transportation Integrated Search
2017-05-10
The Midwest States Pooled Fund Program has been developing a prototype design for a non-proprietary, high-tension cable median barrier for use in a 6H:1V V-ditch. This system incorporates four evenly spaced cables, Midwest Weak Posts (MWP) spaced at ...
ERIC Educational Resources Information Center
Valentine, Dorothy J.
2017-01-01
This case study was conducted to gain more knowledge from citizens in the four city area of Virginia which included Chesapeake, Norfolk, Portsmouth, and Virginia Beach concerning the emergence of proprietary colleges in these areas. It was a qualitative study designed to gain more insight into the feelings and regard that citizens in these areas…
Biomechanical ToolKit: Open-source framework to visualize and process biomechanical data.
Barre, Arnaud; Armand, Stéphane
2014-04-01
C3D file format is widely used in the biomechanical field by companies and laboratories to store motion capture systems data. However, few software packages can visualize and modify the integrality of the data in the C3D file. Our objective was to develop an open-source and multi-platform framework to read, write, modify and visualize data from any motion analysis systems using standard (C3D) and proprietary file formats (used by many companies producing motion capture systems). The Biomechanical ToolKit (BTK) was developed to provide cost-effective and efficient tools for the biomechanical community to easily deal with motion analysis data. A large panel of operations is available to read, modify and process data through C++ API, bindings for high-level languages (Matlab, Octave, and Python), and standalone application (Mokka). All these tools are open-source and cross-platform and run on all major operating systems (Windows, Linux, MacOS X). Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.
17 CFR 75.7 - Limitations on permitted proprietary trading activities.
Code of Federal Regulations, 2014 CFR
2014-04-01
... proprietary trading activities. 75.7 Section 75.7 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION (CONTINUED) PROPRIETARY TRADING AND CERTAIN INTERESTS IN AND RELATIONSHIPS WITH COVERED FUNDS Proprietary Trading § 75.7 Limitations on permitted proprietary trading activities. (a) No transaction, class...
17 CFR 255.7 - Limitations on permitted proprietary trading activities.
Code of Federal Regulations, 2014 CFR
2014-04-01
... proprietary trading activities. 255.7 Section 255.7 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) PROPRIETARY TRADING AND CERTAIN INTERESTS IN AND RELATIONSHIPS WITH COVERED FUNDS Proprietary Trading § 255.7 Limitations on permitted proprietary trading activities. (a) No transaction, class...
Demonstration of fully enabled data center subsystem with embedded optical interconnect
NASA Astrophysics Data System (ADS)
Pitwon, Richard; Worrall, Alex; Stevens, Paul; Miller, Allen; Wang, Kai; Schmidtke, Katharine
2014-03-01
The evolution of data storage communication protocols and corresponding in-system bandwidth densities is set to impose prohibitive cost and performance constraints on future data storage system designs, fuelling proposals for hybrid electronic and optical architectures in data centers. The migration of optical interconnect into the system enclosure itself can substantially mitigate the communications bottlenecks resulting from both the increase in data rate and internal interconnect link lengths. In order to assess the viability of embedding optical links within prevailing data storage architectures, we present the design and assembly of a fully operational data storage array platform, in which all internal high speed links have been implemented optically. This required the deployment of mid-board optical transceivers, an electro-optical midplane and proprietary pluggable optical connectors for storage devices. We present the design of a high density optical layout to accommodate the midplane interconnect requirements of a data storage enclosure with support for 24 Small Form Factor (SFF) solid state or rotating disk drives and the design of a proprietary optical connector and interface cards, enabling standard drives to be plugged into an electro-optical midplane. Crucially, we have also modified the platform to accommodate longer optical interconnect lengths up to 50 meters in order to investigate future datacenter architectures based on disaggregation of modular subsystems. The optically enabled data storage system has been fully validated for both 6 Gb/s and 12 Gb/s SAS data traffic conveyed along internal optical links.
DOCU-TEXT: A tool before the data dictionary
NASA Technical Reports Server (NTRS)
Carter, B.
1983-01-01
DOCU-TEXT, a proprietary software package that aids in the production of documentation for a data processing organization and can be installed and operated only on IBM computers is discussed. In organizing information that ultimately will reside in a data dictionary, DOCU-TEXT proved to be a useful documentation tool in extracting information from existing production jobs, procedure libraries, system catalogs, control data sets and related files. DOCU-TEXT reads these files to derive data that is useful at the system level. The output of DOCU-TEXT is a series of user selectable reports. These reports can reflect the interactions within a single job stream, a complete system, or all the systems in an installation. Any single report, or group of reports, can be generated in an independent documentation pass.
Ground Support Software for Spaceborne Instrumentation
NASA Technical Reports Server (NTRS)
Anicich, Vincent; Thorpe, rob; Fletcher, Greg; Waite, Hunter; Xu, Hykua; Walter, Erin; Frick, Kristie; Farris, Greg; Gell, Dave; Furman, Jufy;
2004-01-01
ION is a system of ground support software for the ion and neutral mass spectrometer (INMS) instrument aboard the Cassini spacecraft. By incorporating commercial off-the-shelf database, Web server, and Java application components, ION offers considerably more ground-support-service capability than was available previously. A member of the team that operates the INMS or a scientist who uses the data collected by the INMS can gain access to most of the services provided by ION via a standard pointand click hyperlink interface generated by almost any Web-browser program running in almost any operating system on almost any computer. Data are stored in one central location in a relational database in a non-proprietary format, are accessible in many combinations and formats, and can be combined with data from other instruments and spacecraft. The use of the Java programming language as a system-interface language offers numerous capabilities for object-oriented programming and for making the database accessible to participants using a variety of computer hardware and software.
NASA Astrophysics Data System (ADS)
Mascetti, L.; Cano, E.; Chan, B.; Espinal, X.; Fiorot, A.; González Labrador, H.; Iven, J.; Lamanna, M.; Lo Presti, G.; Mościcki, JT; Peters, AJ; Ponce, S.; Rousseau, H.; van der Ster, D.
2015-12-01
CERN IT DSS operates the main storage resources for data taking and physics analysis mainly via three system: AFS, CASTOR and EOS. The total usable space available on disk for users is about 100 PB (with relative ratios 1:20:120). EOS actively uses the two CERN Tier0 centres (Meyrin and Wigner) with 50:50 ratio. IT DSS also provide sizeable on-demand resources for IT services most notably OpenStack and NFS-based clients: this is provided by a Ceph infrastructure (3 PB) and few proprietary servers (NetApp). We will describe our operational experience and recent changes to these systems with special emphasis to the present usages for LHC data taking, the convergence to commodity hardware (nodes with 200-TB each with optional SSD) shared across all services. We also describe our experience in coupling commodity and home-grown solution (e.g. CERNBox integration in EOS, Ceph disk pools for AFS, CASTOR and NFS) and finally the future evolution of these systems for WLCG and beyond.
Hot Chips and Hot Interconnects for High End Computing Systems
NASA Technical Reports Server (NTRS)
Saini, Subhash
2005-01-01
I will discuss several processors: 1. The Cray proprietary processor used in the Cray X1; 2. The IBM Power 3 and Power 4 used in an IBM SP 3 and IBM SP 4 systems; 3. The Intel Itanium and Xeon, used in the SGI Altix systems and clusters respectively; 4. IBM System-on-a-Chip used in IBM BlueGene/L; 5. HP Alpha EV68 processor used in DOE ASCI Q cluster; 6. SPARC64 V processor, which is used in the Fujitsu PRIMEPOWER HPC2500; 7. An NEC proprietary processor, which is used in NEC SX-6/7; 8. Power 4+ processor, which is used in Hitachi SR11000; 9. NEC proprietary processor, which is used in Earth Simulator. The IBM POWER5 and Red Storm Computing Systems will also be discussed. The architectures of these processors will first be presented, followed by interconnection networks and a description of high-end computer systems based on these processors and networks. The performance of various hardware/programming model combinations will then be compared, based on latest NAS Parallel Benchmark results (MPI, OpenMP/HPF and hybrid (MPI + OpenMP). The tutorial will conclude with a discussion of general trends in the field of high performance computing, (quantum computing, DNA computing, cellular engineering, and neural networks).
Profex: a graphical user interface for the Rietveld refinement program BGMN.
Doebelin, Nicola; Kleeberg, Reinhard
2015-10-01
Profex is a graphical user interface for the Rietveld refinement program BGMN . Its interface focuses on preserving BGMN 's powerful and flexible scripting features by giving direct access to BGMN input files. Very efficient workflows for single or batch refinements are achieved by managing refinement control files and structure files, by providing dialogues and shortcuts for many operations, by performing operations in the background, and by providing import filters for CIF and XML crystal structure files. Refinement results can be easily exported for further processing. State-of-the-art graphical export of diffraction patterns to pixel and vector graphics formats allows the creation of publication-quality graphs with minimum effort. Profex reads and converts a variety of proprietary raw data formats and is thus largely instrument independent. Profex and BGMN are available under an open-source license for Windows, Linux and OS X operating systems.
Profex: a graphical user interface for the Rietveld refinement program BGMN
Doebelin, Nicola; Kleeberg, Reinhard
2015-01-01
Profex is a graphical user interface for the Rietveld refinement program BGMN. Its interface focuses on preserving BGMN’s powerful and flexible scripting features by giving direct access to BGMN input files. Very efficient workflows for single or batch refinements are achieved by managing refinement control files and structure files, by providing dialogues and shortcuts for many operations, by performing operations in the background, and by providing import filters for CIF and XML crystal structure files. Refinement results can be easily exported for further processing. State-of-the-art graphical export of diffraction patterns to pixel and vector graphics formats allows the creation of publication-quality graphs with minimum effort. Profex reads and converts a variety of proprietary raw data formats and is thus largely instrument independent. Profex and BGMN are available under an open-source license for Windows, Linux and OS X operating systems. PMID:26500466
Operating experience of the southwire high-temperature superconducting cable project
NASA Astrophysics Data System (ADS)
Hughey, R. L.; Lindsay, D.
2002-01-01
Southwire Company of Carrollton, Georgia in cooperation with Oak Ridge National Laboratory has designed, built, installed and is operating the world's first field installation of a High Temperature Superconducting (HTS) cable system. The cables supply power to three Southwire manufacturing facilities and part of the corporate headquarters building in Carrollton, GA. The system consists of three 30-m single phase cables rated at 12.4 kV, 1250 Amps, liquid nitrogen cooling system, and the computer-based control system. The cables are built using BSCCO-2223 powder-in-tube HTS tapes and a proprietary cryogenic dielectric material called Cryoflex™. The cables are fully shielded with a second layer of HTS tapes to eliminate any external magnetic fields. The Southwire HTS cables were first energized on january 6, 2000. Since that time they have logged over 8,500 hours of operation while supplying 100% of the required customer load. To date, the cables have worked without failure and operations are continuing. The cable design has passed requisite testing for this class of conventional cables including 10× over current to 12,500 Amps and BIL testing to 110 kV. Southwire has also successfully designed and tested a cable splice. System heat loads and AC Losses have been measured and compared to calculated values. On June 1, 2001 on-site monitoring was ceased and the system was changed to unattended operation to further prove the reliability of the HTS cable system. .
31 CFR 800.301 - Transactions that are covered transactions.
Code of Federal Regulations, 2010 CFR
2010-07-01
..., and maintained relationships with its prior customers, all of which were transferred to Corporation A..., customer list, equipment, and inventory management software used to operate the facility. Under these facts... physical facility, and would not include customer lists, intellectual property, or other proprietary...
Implications of acceleration environments on scaling materials processing in space to production
NASA Technical Reports Server (NTRS)
Demel, Ken
1990-01-01
Some considerations regarding materials processing in space are covered from a commercial perspective. Key areas include power, proprietary data, operational requirements (including logistics), and also the center of gravity location, and control of that location with respect to materials processing payloads.
31 CFR 800.301 - Transactions that are covered transactions.
Code of Federal Regulations, 2014 CFR
2014-07-01
..., and maintained relationships with its prior customers, all of which were transferred to Corporation A..., customer list, equipment, and inventory management software used to operate the facility. Under these facts... physical facility, and would not include customer lists, intellectual property, or other proprietary...
Towards a Pre-Intervention Analytical Methodology
2012-08-01
such as concept maps ( Kaste 2007), mind maps, and dynamically interactive networks, available from a variety of proprietary, government, and open...Joint Publication 3-27, Counterterrorism (JP 3-27). Joint Staff. July 2008. Joint Publication 3-57, Civil-Military Operations (JP 3-57). Kaste , R; E
31 CFR 800.301 - Transactions that are covered transactions.
Code of Federal Regulations, 2012 CFR
2012-07-01
..., and maintained relationships with its prior customers, all of which were transferred to Corporation A..., customer list, equipment, and inventory management software used to operate the facility. Under these facts... physical facility, and would not include customer lists, intellectual property, or other proprietary...
31 CFR 800.301 - Transactions that are covered transactions.
Code of Federal Regulations, 2013 CFR
2013-07-01
..., and maintained relationships with its prior customers, all of which were transferred to Corporation A..., customer list, equipment, and inventory management software used to operate the facility. Under these facts... physical facility, and would not include customer lists, intellectual property, or other proprietary...
31 CFR 800.301 - Transactions that are covered transactions.
Code of Federal Regulations, 2011 CFR
2011-07-01
..., and maintained relationships with its prior customers, all of which were transferred to Corporation A..., customer list, equipment, and inventory management software used to operate the facility. Under these facts... physical facility, and would not include customer lists, intellectual property, or other proprietary...
NASA Astrophysics Data System (ADS)
Bozzo, E.; Antonelli, A.; Argan, A.; Barret, D.; Binko, Pavel; Brandt, S.; Cavazzuti, E.; Courvoisier, T.; den Herder, J. W.; Feroci, M.; Ferrigno, C.; Giommi, P.; Götz, D.; Guy, L.; Hernanz, M.; in't Zand, J. J. M.; Klochkov, D.; Kuulkers, Erik; Motch, C.; Lumb, D.; Papitto, A.; Pittori, Carlotta; Rohlfs, R.; Santangelo, A.; Schmid, C.; Schwope, A. D.; Smith, P. J.; Webb, N. A.; Wilms, J.; Zane, S.
2014-07-01
LOFT, the Large Observatory For X-ray Timing, was one of the ESA M3 mission candidates that completed their assessment phase at the end of 2013. LOFT is equipped with two instruments, the Large Area Detector (LAD) and the Wide Field Monitor (WFM). The LAD performs pointed observations of several targets per orbit (~90 minutes), providing roughly ~80 GB of proprietary data per day (the proprietary period will be 12 months). The WFM continuously monitors about 1/3 of the sky at a time and provides data for about ~100 sources a day, resulting in a total of ~20 GB of additional telemetry. The LOFT Burst alert System additionally identifies on-board bright impulsive events (e.g., Gamma-ray Bursts, GRBs) and broadcasts the corresponding position and trigger time to the ground using a dedicated system of ~15 VHF receivers. All WFM data are planned to be made public immediately. In this contribution we summarize the planned organization of the LOFT ground segment (GS), as established in the mission Yellow Book1. We describe the expected GS contributions from ESA and the LOFT consortium. A review is provided of the planned LOFT data products and the details of the data flow, archiving and distribution. Despite LOFT was not selected for launch within the M3 call, its long assessment phase ( >2 years) led to a very solid mission design and an efficient planning of its ground operations.
Use of small stand-alone Internet nodes as a distributed control system
NASA Astrophysics Data System (ADS)
Goodwin, Robert W.; Kucera, Michael J.; Shea, Michael F.
1994-12-01
For several years, the standard model for accelerator control systems has been workstation consoles connected to VME local stations by a Local Area Network with analog and digital data being accessed via a field bus to custom I/O interface electronics. Commercially available hardware has now made it possible to implement a small stand-alone data acquisition station that combines the LAN connection, the computer, and the analog and digital I/O interface on a single board. This eliminates the complexity of a field bus and the associated proprietary I/O hardware. A minimum control system is one data acquisition station and a Macintosh or workstation console, both connected to the network; larger systems have more consoles and nodes. An implementation of this architecture is described along with performance and operational experience.
Systems and Methods for Decoy Routing and Convert Channel Bonding
2013-11-26
34 Proc. R. Soc. A, vol. 463, Jan. 12, 2007, pp. 1-16. " Stupid censorship Web Proxy," http://www.stupidcensorship.com/, retrieved from the internet on...services such as those offered by Google or Skype, web or microblogs such as Twitter, various social media services such as Face- book, and file...device (e.g., Skype, Google , Jabber, Firefox) to be directed to the proprietary software for processing. For instance, the proprietary software of
NASA Astrophysics Data System (ADS)
Lemley, Todd A.
1996-11-01
The rapid change in the telecommunications environment is forcing carriers to re-assess not only their service offering, but also their network management philosophy. The competitive carrier environment has taken away the luxury of throwing technology at a problem by using legacy and proprietary systems and architectures. A more flexible management environment is necessary to effectively gain, and maintain operating margins in the new market era. Competitive forces are driving change which gives carriers more choices than those that are available in legacy and standards-based solutions alone. However, creating an operational support system (OSS) with this gap between legacy and standards has become as dynamic as the services which it supports. A philosophy which helps to integrate the legacy and standards systems is domain management. Domain management relates to a specific service or market 'domain,'and its associated operational support requirements. It supports a companies definition of its business model, which drives the definition of each domain. It also attempts to maximize current investment while injecting new technology available in a practical approach. The following paragraphs offer an overview of legacy systems, standards-based philosophy, and the potential of domain management to help bridge the gap between the two types of systems.
17 CFR 255.6 - Other permitted proprietary trading activities.
Code of Federal Regulations, 2014 CFR
2014-04-01
... trading activities. 255.6 Section 255.6 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) PROPRIETARY TRADING AND CERTAIN INTERESTS IN AND RELATIONSHIPS WITH COVERED FUNDS Proprietary Trading § 255.6 Other permitted proprietary trading activities. (a) Permitted trading in domestic...
17 CFR 75.6 - Other permitted proprietary trading activities.
Code of Federal Regulations, 2014 CFR
2014-04-01
... trading activities. 75.6 Section 75.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION (CONTINUED) PROPRIETARY TRADING AND CERTAIN INTERESTS IN AND RELATIONSHIPS WITH COVERED FUNDS Proprietary Trading § 75.6 Other permitted proprietary trading activities. (a) Permitted trading in domestic...
Performance analysis of a proposed tightly-coupled medical instrument network based on CAN protocol.
Mujumdar, Shantanu; Thongpithoonrat, Pongnarin; Gurkan, D; McKneely, Paul K; Chapman, Frank M; Merchant, Fatima
2010-01-01
Advances in medical devices and health care has been phenomenal during the recent years. Although medical device manufacturers have been improving their instruments, network connection of these instruments still rely on proprietary technologies. Even if the interface has been provided by the manufacturer (e.g., RS-232, USB, or Ethernet coupled with a proprietary API), there is no widely-accepted uniform data model to access data of various bedside instruments. There is a need for a common standard which allows for internetworking with the medical devices from different manufacturers. ISO/IEEE 11073 (X73) is a standard attempting to unify the interfaces of all medical devices. X73 defines a client access mechanism that would be implemented into the communication controllers (residing between an instrument and the network) in order to access/network patient data. On the other hand, MediCAN™ technology suite has been demonstrated with various medical instruments to achieve interfacing and networking with a similar goal in its open standardization approach. However, it provides a more generic definition for medical data to achieve flexibility for networking and client access mechanisms. The instruments are in turn becoming more sophisticated; however, the operation of an instrument is still expected to be locally done by authorized medical personnel. Unfortunately, each medical instrument has its unique proprietary API (application programming interface - if any) to provide automated and electronic access to monitoring data. Integration of these APIs requires an agreement with the manufacturers towards realization of interoperable health care networking. As long as the interoperability of instruments with a network is not possible, ubiquitous access to patient status is limited only to manual entry based systems. This paper demonstrates an attempt to realize an interoperable medical instrument interface for networking using MediCAN technology suite as an open standard.
47 CFR 76.938 - Proprietary information.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 47 Telecommunication 4 2011-10-01 2011-10-01 false Proprietary information. 76.938 Section 76.938... CABLE TELEVISION SERVICE Cable Rate Regulation § 76.938 Proprietary information. A franchising authority may require the production of proprietary information to make a rate determination in those cases...
47 CFR 64.2011 - Notification of customer proprietary network information security breaches.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 47 Telecommunication 3 2011-10-01 2011-10-01 false Notification of customer proprietary network information security breaches. 64.2011 Section 64.2011 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Proprietary Network Information § 64.2011 Notification of customer proprietary network information security...
47 CFR 64.2011 - Notification of customer proprietary network information security breaches.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 47 Telecommunication 3 2010-10-01 2010-10-01 false Notification of customer proprietary network information security breaches. 64.2011 Section 64.2011 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Proprietary Network Information § 64.2011 Notification of customer proprietary network information security...
19 CFR 351.304 - Establishing business proprietary treatment of information.
Code of Federal Regulations, 2010 CFR
2010-04-01
... an investigation, the submitting person may enclose business proprietary customer names within double... 19 Customs Duties 3 2010-04-01 2010-04-01 false Establishing business proprietary treatment of... ANTIDUMPING AND COUNTERVAILING DUTIES Information and Argument § 351.304 Establishing business proprietary...
47 CFR 64.2011 - Notification of customer proprietary network information security breaches.
Code of Federal Regulations, 2013 CFR
2013-10-01
... Proprietary Network Information § 64.2011 Notification of customer proprietary network information security... 47 Telecommunication 3 2013-10-01 2013-10-01 false Notification of customer proprietary network information security breaches. 64.2011 Section 64.2011 Telecommunication FEDERAL COMMUNICATIONS COMMISSION...
47 CFR 64.5111 - Notification of customer proprietary network information security breaches.
Code of Federal Regulations, 2013 CFR
2013-10-01
... Proprietary Network Information. § 64.5111 Notification of customer proprietary network information security... 47 Telecommunication 3 2013-10-01 2013-10-01 false Notification of customer proprietary network information security breaches. 64.5111 Section 64.5111 Telecommunication FEDERAL COMMUNICATIONS COMMISSION...
47 CFR 64.5111 - Notification of customer proprietary network information security breaches.
Code of Federal Regulations, 2014 CFR
2014-10-01
... Proprietary Network Information. § 64.5111 Notification of customer proprietary network information security... 47 Telecommunication 3 2014-10-01 2014-10-01 false Notification of customer proprietary network information security breaches. 64.5111 Section 64.5111 Telecommunication FEDERAL COMMUNICATIONS COMMISSION...
47 CFR 64.2011 - Notification of customer proprietary network information security breaches.
Code of Federal Regulations, 2014 CFR
2014-10-01
... Proprietary Network Information § 64.2011 Notification of customer proprietary network information security... 47 Telecommunication 3 2014-10-01 2014-10-01 false Notification of customer proprietary network information security breaches. 64.2011 Section 64.2011 Telecommunication FEDERAL COMMUNICATIONS COMMISSION...
47 CFR 64.2011 - Notification of customer proprietary network information security breaches.
Code of Federal Regulations, 2012 CFR
2012-10-01
... Proprietary Network Information § 64.2011 Notification of customer proprietary network information security... 47 Telecommunication 3 2012-10-01 2012-10-01 false Notification of customer proprietary network information security breaches. 64.2011 Section 64.2011 Telecommunication FEDERAL COMMUNICATIONS COMMISSION...
Christophersen, Jon; Morrison, Bill
2018-02-14
Energy storage devices, primarily batteries, are now more important to consumers, industries and the military. With increasing technical complexity and higher user expectations, there is also a demand for highly accurate state-of-health battery assessment techniques. IMB incorporates patented, proprietary, and tested capabilities using control software and hardware that can be part of an embedded monitoring system. IMB directly measures the wideband impedance spectrum in seconds during battery operation with no significant impact on service life. It also can be applied to batteries prior to installation, confirming health before entering active service, as well as during regular maintenance. For more information about this project, visit http://www.inl.gov/rd100/2011/impedance-measurement-box/
47 CFR 64.2005 - Use of customer proprietary network information without customer approval.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 47 Telecommunication 3 2010-10-01 2010-10-01 false Use of customer proprietary network information without customer approval. 64.2005 Section 64.2005 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Proprietary Network Information § 64.2005 Use of customer proprietary network information without customer...
47 CFR 64.2009 - Safeguards required for use of customer proprietary network information.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 47 Telecommunication 3 2010-10-01 2010-10-01 false Safeguards required for use of customer proprietary network information. 64.2009 Section 64.2009 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Proprietary Network Information § 64.2009 Safeguards required for use of customer proprietary network...
47 CFR 64.2007 - Approval required for use of customer proprietary network information.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 47 Telecommunication 3 2010-10-01 2010-10-01 false Approval required for use of customer proprietary network information. 64.2007 Section 64.2007 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Proprietary Network Information § 64.2007 Approval required for use of customer proprietary network...
47 CFR 64.2007 - Approval required for use of customer proprietary network information.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 47 Telecommunication 3 2011-10-01 2011-10-01 false Approval required for use of customer proprietary network information. 64.2007 Section 64.2007 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Proprietary Network Information § 64.2007 Approval required for use of customer proprietary network...
47 CFR 64.2005 - Use of customer proprietary network information without customer approval.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 47 Telecommunication 3 2011-10-01 2011-10-01 false Use of customer proprietary network information without customer approval. 64.2005 Section 64.2005 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Proprietary Network Information § 64.2005 Use of customer proprietary network information without customer...
47 CFR 64.2009 - Safeguards required for use of customer proprietary network information.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 47 Telecommunication 3 2011-10-01 2011-10-01 false Safeguards required for use of customer proprietary network information. 64.2009 Section 64.2009 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Proprietary Network Information § 64.2009 Safeguards required for use of customer proprietary network...
47 CFR 64.2010 - Safeguards on the disclosure of customer proprietary network information.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 47 Telecommunication 3 2011-10-01 2011-10-01 false Safeguards on the disclosure of customer proprietary network information. 64.2010 Section 64.2010 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Proprietary Network Information § 64.2010 Safeguards on the disclosure of customer proprietary network...
NSTX-U Advances in Real-Time C++11 on Linux
NASA Astrophysics Data System (ADS)
Erickson, Keith G.
2015-08-01
Programming languages like C and Ada combined with proprietary embedded operating systems have dominated the real-time application space for decades. The new C++11 standard includes native, language-level support for concurrency, a required feature for any nontrivial event-oriented real-time software. Threads, Locks, and Atomics now exist to provide the necessary tools to build the structures that make up the foundation of a complex real-time system. The National Spherical Torus Experiment Upgrade (NSTX-U) at the Princeton Plasma Physics Laboratory (PPPL) is breaking new ground with the language as applied to the needs of fusion devices. A new Digital Coil Protection System (DCPS) will serve as the main protection mechanism for the magnetic coils, and it is written entirely in C++11 running on Concurrent Computer Corporation's real-time operating system, RedHawk Linux. It runs over 600 algorithms in a 5 kHz control loop that determine whether or not to shut down operations before physical damage occurs. To accomplish this, NSTX-U engineers developed software tools that do not currently exist elsewhere, including real-time atomic synchronization, real-time containers, and a real-time logging framework. Together with a recent (and carefully configured) version of the GCC compiler, these tools enable data acquisition, processing, and output using a conventional operating system to meet a hard real-time deadline (that is, missing one periodic is a failure) of 200 microseconds.
48 CFR 703.104-5 - Disclosure, protection, and marking of proprietary and source information.
Code of Federal Regulations, 2010 CFR
2010-10-01
... CONFLICTS OF INTEREST Safeguards 703.104-5 Disclosure, protection, and marking of proprietary and source information. A Contracting Office may authorize release of proprietary and/or source selection information..., and marking of proprietary and source information. 703.104-5 Section 703.104-5 Federal Acquisition...
47 CFR 64.2008 - Notice required for use of customer proprietary network information.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 47 Telecommunication 3 2011-10-01 2011-10-01 false Notice required for use of customer proprietary network information. 64.2008 Section 64.2008 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Proprietary Network Information § 64.2008 Notice required for use of customer proprietary network information...
47 CFR 64.2008 - Notice required for use of customer proprietary network information.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 47 Telecommunication 3 2010-10-01 2010-10-01 false Notice required for use of customer proprietary network information. 64.2008 Section 64.2008 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Proprietary Network Information § 64.2008 Notice required for use of customer proprietary network information...
43 CFR 3190.1 - Proprietary data.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Proprietary data. 3190.1 Section 3190.1... and Gas Inspections: General § 3190.1 Proprietary data. With regard to any data or information... agreement or contract, the following applies: (a) Proprietary data shall be made available to a State or...
Interstage Flammability Analysis Approach
NASA Technical Reports Server (NTRS)
Little, Jeffrey K.; Eppard, William M.
2011-01-01
The Interstage of the Ares I launch platform houses several key components which are on standby during First Stage operation: the Reaction Control System (ReCS), the Upper Stage (US) Thrust Vector Control (TVC) and the J-2X with the Main Propulsion System (MPS) propellant feed system. Therefore potentially dangerous leaks of propellants could develop. The Interstage leaks analysis addresses the concerns of localized mixing of hydrogen and oxygen gases to produce deflagration zones in the Interstage of the Ares I launch vehicle during First Stage operation. This report details the approach taken to accomplish the analysis. Specified leakage profiles and actual flammability results are not presented due to proprietary and security restrictions. The interior volume formed by the Interstage walls, bounding interfaces with the Upper and First Stages, and surrounding the J2-X engine was modeled using Loci-CHEM to assess the potential for flammable gas mixtures to develop during First Stage operations. The transient analysis included a derived flammability indicator based on mixture ratios to maintain achievable simulation times. Validation of results was based on a comparison to Interstage pressure profiles outlined in prior NASA studies. The approach proved useful in the bounding of flammability risk in supporting program hazard reviews.
John Wood Community College: The Contractual Common Market Concept.
ERIC Educational Resources Information Center
Heath, Paul R.
This paper describes the philosophy and operation of John Wood Community College (JWCC), located in Illinois, which uses neighboring private and proprietary colleges in Illinois, Missouri, and Iowa to provide instructional and support services for its students. Currently, six schools have contractual relationships with JWCC, with the result that…
Operation and Maintenance Support Information (OMSI) Creation, Management, and Repurposing With XML
2004-09-01
engines that cost tens of thousands of dollars. There are many middleware applications on the commercial and open-source market . The “Big Four......planners can begin an incremental planning effort early in the facility construction phase. This thesis provides a non-proprietary, no- cost solution to
19 CFR 356.9 - Persons authorized to receive proprietary information.
Code of Federal Regulations, 2010 CFR
2010-04-01
...) Not involved in the competitive decision-making of a participant to the panel review or for any person... such counsel, provided that the counsel or professional does not participate in competitive decision-making activity (such as advice on production, sales, operations, or investments, but not legal advice...
XTCE and XML Database Evolution and Lessons from JWST, LandSat, and Constellation
NASA Technical Reports Server (NTRS)
Gal-Edd, Jonathan; Kreistle, Steven; Fatig. Cirtos; Jones, Ronald
2008-01-01
The database organizations within three different NASA projects have advanced current practices by creating database synergy between the various spacecraft life cycle stakeholders and educating users in the benefits of the Consultative Committee for Space Data Systems (CCSDS) XML Telemetry and Command Exchange (XTCE) format. The combination of XML for managing program data and CCSDS XTCE for exchange is a robust approach that will meet all user requirements using Standards and Non proprietary tools. COTS tools for XTCEKML are very wide and varied. To combine together various low cost and free tools can be more expensive in the long run than choosing a more expensive COTS tool that meets all the needs. This was especially important when deploying in 32 remote sites with no need for licenses. A common mission XTCEKML format between dissimilar systems is possible and is not difficult. Command XMLKTCE is more complex than telemetry and the use of XTCEKML metadata to describe pages and scripts is needed due to the proprietary nature of most current ground systems. Other mission and science products such as spacecraft loads, science image catalogs, and mission operation procedures can all be described with XML as well to increase there flexibility as systems evolve and change. Figure 10 is an example of a spacecraft table load. The word is out and the XTCE community is growing, The f sXt TCE user group was held in October and in addition to ESAESOC, SC02000, and CNES identified several systems based on XTCE. The second XTCE user group is scheduled for March 10, 2008 with LDMC and others joining. As the experience with XTCE grows and the user community receives the promised benefits of using XTCE and XML the interest is growing fast.
ERIC Educational Resources Information Center
Clowes, Darrel A., Ed.; Hawthorne, Elizabeth M., Ed.
1995-01-01
This volume describes characteristics of proprietary schools, or for-profit schools that focus primarily on career and technical education, and explores similarities, differences, and points of linkage between proprietary schools and community colleges. The following articles are included: (1) "Community Colleges and Proprietary Schools: Conflict…
42 CFR 413.157 - Return on equity capital of proprietary providers.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 2 2010-10-01 2010-10-01 false Return on equity capital of proprietary providers... Capital-Related Costs § 413.157 Return on equity capital of proprietary providers. (a) Definitions. For... proprietary hospitals and SNFs. (b) General rule. A reasonable return on equity capital invested and used in...
Proprietary Vocational Schools: A Significant Sector of American Postsecondary Education.
ERIC Educational Resources Information Center
Wilms, Wellford W.
The role of proprietary vocational schools in American postsecondary education and the way in which student financial aid is used are discussed. Proprietary vocational schools, organized as profit-seeking institutions, provide the bulk of American postsecondary vocational education. The average proprietary school is small and exists in a high-risk…
Statewide Planning and Policy Development in Relation to Proprietary Schools.
ERIC Educational Resources Information Center
Wallhaus, Robert A.
Issues concerning state planning and policy toward proprietary schools are considered, with a focus on efforts of Illinois to relate to the proprietary sector in such areas as coordination and planning, student financial aid, and the approval of schools and programs. States that try to integrate the proprietary sector into their planning…
Development of a nonazeotropic heat pump for crew hygiene water heating
NASA Technical Reports Server (NTRS)
Walker, David H.; Deming, Glenn I.
1991-01-01
A Phase 2 SBIR Program funded by the NASA Marshall Space Flight Center to develop a Nonazeotropic Heat Pump is described. The heat pump system which was designed, fabricated, and tested in the Foster-Miller laboratory, is capable of providing crew hygiene water heating for future manned missions. The heat pump utilizes a nonazeotropic refrigerant mixture which, in this application, provides a significant Coefficient of Performance improvement over a single-constituent working fluid. In order to take full advantage of the refrigerant mixture, compact tube-in-tube heat exchangers were designed. A high efficiency scroll compressor with a proprietary lubrication system was developed to meet the requirements of operation in zero-gravity. The prototype heat pump system consumes less than 200W of power compared to the alternative of electric cartridge heaters which would require 2 to 5 kW.
NASA Technical Reports Server (NTRS)
Williams, Richard S.
2015-01-01
The presentation is next Sunday, May 10th. It will be to the Civil Aviation Medical Association, for 2 hours at Disney World in Orlando. It is a high level talk on space medicine, including history, the role of my office, human health risks of space flight, general aspects of space medicine practice, human health risk management (including integrated activities of medical operations and the Human Research Program, and thoughts concerning health risks for long duration exploration class space missions. No proprietary data or material will be used, all is readily available in the public sector. There is also a short (30 min) talk on Monday at the CAMA lunch. There we will describe the Visual Impairment and Intracranial Pressure syndrome, with possible etiologies and plans for research (already selected studies). Again, nothing proprietary will be discussed.
Evolution of the JPSS Ground Project Calibration and Validation System
NASA Technical Reports Server (NTRS)
Purcell, Patrick; Chander, Gyanesh; Jain, Peyush
2016-01-01
The Joint Polar Satellite System (JPSS) is the National Oceanic and Atmospheric Administration's (NOAA) next-generation operational Earth observation Program that acquires and distributes global environmental data from multiple polar-orbiting satellites. The JPSS Program plays a critical role to NOAA's mission to understand and predict changes in weather, climate, oceans, coasts, and space environments, which supports the Nation's economy and protection of lives and property. The National Aeronautics and Space Administration (NASA) is acquiring and implementing the JPSS, comprised of flight and ground systems, on behalf of NOAA. The JPSS satellites are planned to fly in the afternoon orbit and will provide operational continuity of satellite-based observations and products for NOAA Polar-orbiting Operational Environmental Satellites (POES) and the Suomi National Polar-orbiting Partnership (SNPP) satellite. To support the JPSS Calibration and Validation (CalVal) node Government Resource for Algorithm Verification, Independent Test, and Evaluation (GRAVITE) services facilitate: Algorithm Integration and Checkout, Algorithm and Product Operational Tuning, Instrument Calibration, Product Validation, Algorithm Investigation, and Data Quality Support and Monitoring. GRAVITE is a mature, deployed system that currently supports the SNPP Mission and has been in operations since SNPP launch. This paper discusses the major re-architecture for Block 2.0 that incorporates SNPP lessons learned, architecture of the system, and demonstrates how GRAVITE has evolved as a system with increased performance. It is now a robust, stable, reliable, maintainable, scalable, and secure system that supports development, test, and production strings, replaces proprietary and custom software, uses open source software, and is compliant with NASA and NOAA standards.
Evolution of the JPSS Ground Project Calibration and Validation System
NASA Technical Reports Server (NTRS)
Chander, Gyanesh; Jain, Peyush
2014-01-01
The Joint Polar Satellite System (JPSS) is the National Oceanic and Atmospheric Administrations (NOAA) next-generation operational Earth observation Program that acquires and distributes global environmental data from multiple polar-orbiting satellites. The JPSS Program plays a critical role to NOAAs mission to understand and predict changes in weather, climate, oceans, coasts, and space environments, which supports the Nation’s economy and protection of lives and property. The National Aerospace and Atmospheric Administration (NASA) is acquiring and implementing the JPSS, comprised of flight and ground systems on behalf of NOAA. The JPSS satellites are planned to fly in the afternoon orbit and will provide operational continuity of satellite-based observations and products for NOAA Polar-orbiting Operational Environmental Satellites (POES) and the Suomi National Polar-orbiting Partnership (SNPP) satellite. To support the JPSS Calibration and Validation (CalVal) node Government Resource for Algorithm Verification, Independent Test, and Evaluation (GRAVITE) services facilitate: Algorithm Integration and Checkout, Algorithm and Product Operational Tuning, Instrument Calibration, Product Validation, Algorithm Investigation, and Data Quality Support and Monitoring. GRAVITE is a mature, deployed system that currently supports the SNPP Mission and has been in operations since SNPP launch. This paper discusses the major re-architecture for Block 2.0 that incorporates SNPP lessons learned, architecture of the system, and demonstrates how GRAVITE has evolved as a system with increased performance. It is now a robust, stable, reliable, maintainable, scalable, and secure system that supports development, test, and production strings, replaces proprietary and custom software, uses open source software, and is compliant with NASA and NOAA standards.
Code of Federal Regulations, 2011 CFR
2011-10-01
... RULES RELATING TO COMMON CARRIERS Customer Proprietary Network Information § 64.2003 Definitions. (a... service. (g) Customer proprietary network information (CPNI). The term “customer proprietary network...
ERIC Educational Resources Information Center
Fraas, Charlotte J.
This report examines some of the major issues that Congress is likely to confront in considering future use of student aid programs by proprietary school students. Chapter 1 presents an historical overview of proprietary school participation in Title IV student aid programs and Chapter 2 explores the current participation of proprietary school…
Client-side Medical Image Colorization in a Collaborative Environment.
Virag, Ioan; Stoicu-Tivadar, Lăcrămioara; Crişan-Vida, Mihaela
2015-01-01
The paper presents an application related to collaborative medicine using a browser based medical visualization system with focus on the medical image colorization process and the underlying open source web development technologies involved. Browser based systems allow physicians to share medical data with their remotely located counterparts or medical students, assisting them during patient diagnosis, treatment monitoring, surgery planning or for educational purposes. This approach brings forth the advantage of ubiquity. The system can be accessed from a any device, in order to process the images, assuring the independence towards having a specific proprietary operating system. The current work starts with processing of DICOM (Digital Imaging and Communications in Medicine) files and ends with the rendering of the resulting bitmap images on a HTML5 (fifth revision of the HyperText Markup Language) canvas element. The application improves the image visualization emphasizing different tissue densities.
Metadata-Driven SOA-Based Application for Facilitation of Real-Time Data Warehousing
NASA Astrophysics Data System (ADS)
Pintar, Damir; Vranić, Mihaela; Skočir, Zoran
Service-oriented architecture (SOA) has already been widely recognized as an effective paradigm for achieving integration of diverse information systems. SOA-based applications can cross boundaries of platforms, operation systems and proprietary data standards, commonly through the usage of Web Services technology. On the other side, metadata is also commonly referred to as a potential integration tool given the fact that standardized metadata objects can provide useful information about specifics of unknown information systems with which one has interest in communicating with, using an approach commonly called "model-based integration". This paper presents the result of research regarding possible synergy between those two integration facilitators. This is accomplished with a vertical example of a metadata-driven SOA-based business process that provides ETL (Extraction, Transformation and Loading) and metadata services to a data warehousing system in need of a real-time ETL support.
Evaluation of DRM system for reflective crack prevention.
DOT National Transportation Integrated Search
2008-03-31
Reflective cracking in asphalt pavements presents a serious problem for highway agencies : worldwide. A new interlayer membrane system, DRM, which is a proprietary system consisting of : a sealant and an emulsion, was constructed by the Mississippi D...
Crackscope : automatic pavement cracking inspection system.
DOT National Transportation Integrated Search
2008-08-01
The CrackScope system is an automated pavement crack rating system consisting of a : digital line scan camera, laser-line illuminator, and proprietary crack detection and classification : software. CrackScope is able to perform real-time pavement ins...
NASA Technical Reports Server (NTRS)
1997-01-01
IntelliWeb and IntelliPrint, products from MicroMass Communications, utilize C Language Integrated Production System (CLIPS), a development and delivery expert systems tool developed at Johnson Space Center. IntelliWeb delivers personalized messages by dynamically creating single web pages or entire web sites based on information provided by each website visitor. IntelliPrint is a product designed to create tailored, individualized messages via printed media. The software uses proprietary technology to generate printed messages that are personally relevant and tailored to meet each individual's needs. Intelliprint is in use in many operations including Brystol-Myers Squibb's personalized newsletter, "Living at Your Best," geared to each recipient based on a health and lifestyle survey taken earlier; and SmithKline Beecham's "Nicorette Committed Quitters Program," in which customized motivational materials support participants in their attempt to quit smoking.
Qasem, Ahmad; Safavikhasraghi, Mitra; Naser, Saleh A
2016-01-01
Most recently we reported that RHB‑104 triple antibiotics combination in culture is bactericidal and should be effective for treatment of Crohn's disease (CD)-associated with Mycobacterium avium subspecies paratuberculosis (MAP) (Alcedo et al. in Gut Pathog 14:32, 2016). The combination exhibited unique synergistic antimicrobial growth activity. The proprietary RHB-104 capsule formulation contains active ingredients (63.3 % Clarithromycin (CLA), 6.7 % Clofazimine (CLO) and 30 % Rifabutin (RIF)). In our earlier study, we could not dissolve the proprietary RHB-104 capsule formulation in one compatible solvent. Consequently, we re-created RHB-104 analog by adding appropriate concentrations of each of the three antibiotics into the cultures. The Minimum inhibitory concentration (MIC) for RHB-104 analog, CLA, CLO, RIF, CLA-CLO, CLA-RIF, CLO-RIF and their individual solvents were reported earlier (Alcedo et al. in Gut Pathog 14:32, 2016). In this study, we succeeded in dissolving the proprietary RHB-104 capsule formulation in a single proprietary solvent. This study is designed to compare of the MIC the proprietary RHB-104 capsule formulation to RHB-104 analog against MAP and other microorganisms. BD Bactec™ MGIT™ Para-TB medium (Sparks, MD) system was used to determine the MIC of the proprietary RHB-104 capsule formulation and RHB-104 analog and their solvents against MAP and several other microorganisms. The final concentration of solvents used to dissolve all the drugs were ≤0.5 % (v/v). The MIC for the RHB-104 proprietary solvent against MAP was consistent against all microorganisms tested in the study at 12.5 % (v/v). The MIC for the proprietary RHB-104 capsule formulation was similar to RHB-104 analog against several MAP clinical strains with MIC ≤ 0.2 μg/mL. The MIC for the proprietary RHB-104 capsule formulation was at 2.0 μg/mL against MAP strain MS 137 and M. avium strain JF7 compared to 4.0 ug/mL for RHB-104 analog. Similarly, the MIC of RHB-104 formulation capsule was significantly lower than RHB-104 analog against M. tuberculosis HR237, M. fortuitism subspecies fortuitum, M. smegmatis ATCC 27199, Staphylococcus aureus ATCC 25923 and Listeria monocytogenes ATCC 19112. The data demonstrated that the proprietary RHB-104 capsule formulation is more potent in culture against Mycobacteria and other microorganisms especially those with MIC >0.2. Formulation of multi-drugs in a single capsule results in potent synergistic anti-microbial activity far exceeds treatment the culture with multi-individually dissolved drugs. RHB-104 capsule formulation should be more effective to eradicate MAP infection in patients with CD. The study provides evidence that combining weak antibiotics in one formulation might be the new silver bullet to combat bacteria.
Map Matching and Real World Integrated Sensor Data Warehousing (Presentation)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Burton, E.
2014-02-01
The inclusion of interlinked temporal and spatial elements within integrated sensor data enables a tremendous degree of flexibility when analyzing multi-component datasets. The presentation illustrates how to warehouse, process, and analyze high-resolution integrated sensor datasets to support complex system analysis at the entity and system levels. The example cases presented utilizes in-vehicle sensor system data to assess vehicle performance, while integrating a map matching algorithm to link vehicle data to roads to demonstrate the enhanced analysis possible via interlinking data elements. Furthermore, in addition to the flexibility provided, the examples presented illustrate concepts of maintaining proprietary operational information (Fleet DNA)more » and privacy of study participants (Transportation Secure Data Center) while producing widely distributed data products. Should real-time operational data be logged at high resolution across multiple infrastructure types, map matched to their associated infrastructure, and distributed employing a similar approach; dependencies between urban environment infrastructures components could be better understood. This understanding is especially crucial for the cities of the future where transportation will rely more on grid infrastructure to support its energy demands.« less
GCN capabilities and status, and the incorporation of LIGO/Virgo
NASA Astrophysics Data System (ADS)
Barthelmy, Scott
2016-03-01
The Gamma-ray Coordinates Network / Transient Astronomy Network (GCN/TAN) is a single-point source for all transient astronomy notification. It collects the astrophysical transients from the missions (space-based and nearly all ground-based), puts them into a standard format, and distributes them to whomever wants to receive them. This is all done autonomously (completely autonomous within GCN/TAN, and almost always autonomously within the producer end of operations). This automation means minimal time delays (<0.1 sec within GCN for VOEvent and binary socket-based distribution methods, and typically a few sec for email-based which is dependent on the internet email protocol and the number of hops, both of which are out of the control of GCN/TAN). The LIGO-VIRGO Collaboration (LVC) Notices are now implemented in the GCN/TAN system. During the proprietary phase, the recipients must have an MoU with LVC and LVC must authorize GCN to distribute LVC Notices to each given MoU follow-up observer. In addition to Notices, there are the GCN Circulars, which are prose-style reports of follow-up observations made and results obtains. During the LVC Proprietary phase there are also the GCN LVC Circulars, which also require authorization from LVC to join the LVC Circulars.
A High-Fidelity Simulation of a Generic Commercial Aircraft Engine and Controller
NASA Technical Reports Server (NTRS)
May, Ryan D.; Csank, Jeffrey; Lavelle, Thomas M.; Litt, Jonathan S.; Guo, Ten-Huei
2010-01-01
A new high-fidelity simulation of a generic 40,000 lb thrust class commercial turbofan engine with a representative controller, known as CMAPSS40k, has been developed. Based on dynamic flight test data of a highly instrumented engine and previous engine simulations developed at NASA Glenn Research Center, this non-proprietary simulation was created especially for use in the development of new engine control strategies. C-MAPSS40k is a highly detailed, component-level engine model written in MATLAB/Simulink (The MathWorks, Inc.). Because the model is built in Simulink, users have the ability to use any of the MATLAB tools for analysis and control system design. The engine components are modeled in C-code, which is then compiled to allow faster-than-real-time execution. The engine controller is based on common industry architecture and techniques to produce realistic closed-loop transient responses while ensuring that no safety or operability limits are violated. A significant feature not found in other non-proprietary models is the inclusion of transient stall margin debits. These debits provide an accurate accounting of the compressor surge margin, which is critical in the design of an engine controller. This paper discusses the development, characteristics, and capabilities of the C-MAPSS40k simulation
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gangwal, S.K.; Gupta, R.P.; Khare, G.P.
The objectives of this project are to determine the long-term chemical reactivity and mechanical durability of a fluidized version of Phillips Petroleum Company`s proprietary Z-SORB sorbent for the desulfurization of coal-derived gases in a high-pressure (20 atm) fluidized-bed reactor under simulated U-Gas conditions and at a moderate operating temperature of 538 degrees C.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-06
... CONTACT: Katie Marksberry or Josh Startup, AD/ CVD Operations, Office 9, Import Administration... reimbursement of antidumping duties prior to liquidation of the relevant entries during this POR. Failure to... disclosed under APO in accordance with 19 CFR 351.305, which continues to govern business proprietary...
Infrared sensors and systems for enhanced vision/autonomous landing applications
NASA Technical Reports Server (NTRS)
Kerr, J. Richard
1993-01-01
There exists a large body of data spanning more than two decades, regarding the ability of infrared imagers to 'see' through fog, i.e., in Category III weather conditions. Much of this data is anecdotal, highly specialized, and/or proprietary. In order to determine the efficacy and cost effectiveness of these sensors under a variety of climatic/weather conditions, there is a need for systematic data spanning a significant range of slant-path scenarios. These data should include simultaneous video recordings at visible, midwave (3-5 microns), and longwave (8-12 microns) wavelengths, with airborne weather pods that include the capability of determining the fog droplet size distributions. Existing data tend to show that infrared is more effective than would be expected from analysis and modeling. It is particularly more effective for inland (radiation) fog as compared to coastal (advection) fog, although both of these archetypes are oversimplifications. In addition, as would be expected from droplet size vs wavelength considerations, longwave outperforms midwave, in many cases by very substantial margins. Longwave also benefits from the higher level of available thermal energy at ambient temperatures. The principal attraction of midwave sensors is that staring focal plane technology is available at attractive cost-performance levels. However, longwave technology such as that developed at FLIR Systems, Inc. (FSI), has achieved high performance in small, economical, reliable imagers utilizing serial-parallel scanning techniques. In addition, FSI has developed dual-waveband systems particularly suited for enhanced vision flight testing. These systems include a substantial, embedded processing capability which can perform video-rate image enhancement and multisensor fusion. This is achieved with proprietary algorithms and includes such operations as real-time histograms, convolutions, and fast Fourier transforms.
Lessons Learned From Developing Three Generations of Remote Sensing Science Data Processing Systems
NASA Technical Reports Server (NTRS)
Tilmes, Curt; Fleig, Albert J.
2005-01-01
The Biospheric Information Systems Branch at NASA s Goddard Space Flight Center has developed three generations of Science Investigator-led Processing Systems for use with various remote sensing instruments. The first system is used for data from the MODIS instruments flown on NASA s Earth Observing Systems @OS) Terra and Aqua Spacecraft launched in 1999 and 2002 respectively. The second generation is for the Ozone Measuring Instrument flying on the EOS Aura spacecraft launched in 2004. We are now developing a third generation of the system for evaluation science data processing for the Ozone Mapping and Profiler Suite (OMPS) to be flown by the NPOESS Preparatory Project (NPP) in 2006. The initial system was based on large scale proprietary hardware, operating and database systems. The current OMI system and the OMPS system being developed are based on commodity hardware, the LINUX Operating System and on PostgreSQL, an Open Source RDBMS. The new system distributes its data archive across multiple server hosts and processes jobs on multiple processor boxes. We have created several instances of this system, including one for operational processing, one for testing and reprocessing and one for applications development and scientific analysis. Prior to receiving the first data from OMI we applied the system to reprocessing information from the Solar Backscatter Ultraviolet (SBUV) and Total Ozone Mapping Spectrometer (TOMS) instruments flown from 1978 until now. The system was able to process 25 years (108,000 orbits) of data and produce 800,000 files (400 GiB) of level 2 and level 3 products in less than a week. We will describe the lessons we have learned and tradeoffs between system design, hardware, operating systems, operational staffing, user support and operational procedures. During each generational phase, the system has become more generic and reusable. While the system is not currently shrink wrapped we believe it is to the point where it could be readily adopted, with substantial cost savings, for other similar tasks.
Design of a national distributed health data network.
Maro, Judith C; Platt, Richard; Holmes, John H; Strom, Brian L; Hennessy, Sean; Lazarus, Ross; Brown, Jeffrey S
2009-09-01
A distributed health data network is a system that allows secure remote analysis of separate data sets, each comprising a different medical organization's or health plan's records. Distributed health data networks are currently being planned that could cover millions of people, permitting studies of comparative clinical effectiveness, best practices, diffusion of medical technologies, and quality of care. These networks could also support assessment of medical product safety and other public health needs. Distributed network technologies allow data holders to control all uses of their data, which overcomes many practical obstacles related to confidentiality, regulation, and proprietary interests. Some of the challenges and potential methods of operation of a multipurpose, multi-institutional distributed health data network are described.
A monitoring system for vegetable greenhouses based on a wireless sensor network.
Li, Xiu-hong; Cheng, Xiao; Yan, Ke; Gong, Peng
2010-01-01
A wireless sensor network-based automatic monitoring system is designed for monitoring the life conditions of greenhouse vegetables. The complete system architecture includes a group of sensor nodes, a base station, and an internet data center. For the design of wireless sensor node, the JN5139 micro-processor is adopted as the core component and the Zigbee protocol is used for wireless communication between nodes. With an ARM7 microprocessor and embedded ZKOS operating system, a proprietary gateway node is developed to achieve data influx, screen display, system configuration and GPRS based remote data forwarding. Through a Client/Server mode the management software for remote data center achieves real-time data distribution and time-series analysis. Besides, a GSM-short-message-based interface is developed for sending real-time environmental measurements, and for alarming when a measurement is beyond some pre-defined threshold. The whole system has been tested for over one year and satisfactory results have been observed, which indicate that this system is very useful for greenhouse environment monitoring.
Building Security. Honeywell Planning Guide.
ERIC Educational Resources Information Center
Honeywell, Inc., Minneapolis, Minn.
A general discussion of building detection and alarm systems to provide security against burglary and vandalism is provided by a manufacturer of automated monitoring and control systems. Security systems are identified as--(1) local alarm system, (2) central station alarm system, (3) proprietary alarm system, and (4) direct connect alarm system..…
Hierarchical Analytical Approaches for Unraveling the Composition of Proprietary Mixtures
The composition of commercial mixtures including pesticide inert ingredients, aircraft deicers, and aqueous film-forming foam (AFFF) formulations, and by analogy, fracking fluids, are proprietary. Quantitative analytical methodologies can only be developed for mixture components once their identities are known. Because proprietary mixtures may contain volatile and non-volatile components, a hierarchy of analytical methods is often required for the full identification of all proprietary mixture components.
NSTX-U Advances in Real-Time C++11 on Linux
DOE Office of Scientific and Technical Information (OSTI.GOV)
Erickson, Keith G.
Programming languages like C and Ada combined with proprietary embedded operating systems have dominated the real-time application space for decades. The new C++11standard includes native, language-level support for concurrency, a required feature for any nontrivial event-oriented real-time software. Threads, Locks, and Atomics now exist to provide the necessary tools to build the structures that make up the foundation of a complex real-time system. The National Spherical Torus Experiment Upgrade (NSTX-U) at the Princeton Plasma Physics Laboratory (PPPL) is breaking new ground with the language as applied to the needs of fusion devices. A new Digital Coil Protection System (DCPS) willmore » serve as the main protection mechanism for the magnetic coils, and it is written entirely in C++11 running on Concurrent Computer Corporation's real-time operating system, RedHawk Linux. It runs over 600 algorithms in a 5 kHz control loop that determine whether or not to shut down operations before physical damage occurs. To accomplish this, NSTX-U engineers developed software tools that do not currently exist elsewhere, including real-time atomic synchronization, real-time containers, and a real-time logging framework. Together with a recent (and carefully configured) version of the GCC compiler, these tools enable data acquisition, processing, and output using a conventional operating system to meet a hard real-time deadline (that is, missing one periodic is a failure) of 200 microseconds.« less
NSTX-U Advances in Real-Time C++11 on Linux
Erickson, Keith G.
2015-08-14
Programming languages like C and Ada combined with proprietary embedded operating systems have dominated the real-time application space for decades. The new C++11standard includes native, language-level support for concurrency, a required feature for any nontrivial event-oriented real-time software. Threads, Locks, and Atomics now exist to provide the necessary tools to build the structures that make up the foundation of a complex real-time system. The National Spherical Torus Experiment Upgrade (NSTX-U) at the Princeton Plasma Physics Laboratory (PPPL) is breaking new ground with the language as applied to the needs of fusion devices. A new Digital Coil Protection System (DCPS) willmore » serve as the main protection mechanism for the magnetic coils, and it is written entirely in C++11 running on Concurrent Computer Corporation's real-time operating system, RedHawk Linux. It runs over 600 algorithms in a 5 kHz control loop that determine whether or not to shut down operations before physical damage occurs. To accomplish this, NSTX-U engineers developed software tools that do not currently exist elsewhere, including real-time atomic synchronization, real-time containers, and a real-time logging framework. Together with a recent (and carefully configured) version of the GCC compiler, these tools enable data acquisition, processing, and output using a conventional operating system to meet a hard real-time deadline (that is, missing one periodic is a failure) of 200 microseconds.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wilcox, E.
2014-09-01
LanzaTech and NREL will investigate the integration between biomass gasification and LanzaTech's proprietary gas fermentation process to produce ethanol and 2,3-butanediol. Using three feed materials (woody biomass, agricultural residue and herbaceous grass) NREL will produce syngas via steam indirect gasification and syngas conditioning over a range of process relevant operating conditions. The gasification temperature, steam-to-biomass ratio of the biomass feed into the gasifier, and several levels of syngas conditioning (based on temperature) will be varied to produce multiple syngas streams that will be fed directly to 10 liter seed fermenters operating with the Lanzatech organism. The NREL gasification system willmore » then be integrated with LanzaTech's laboratory pilot unit to produce large-scale samples of ethanol and 2,3-butanediol for conversion to fuels and chemicals.« less
Technology development for phosphoric acid fuel cell powerplant, phase 2
NASA Technical Reports Server (NTRS)
Christner, L.
1981-01-01
The development of materials, cell components, and reformers for on site integrated energy systems is described. Progress includes: (1) heat-treatment of 25 sq cm, 350 sq cm and 1200 sq cm cell test hardware was accomplished. Performance of fuel cells is improved by using this material; (2) electrochemical and chemical corrosion rates of heat-treated and as-molded graphite/phenolic resin composites in phosphoric acid were determined; (3) three cell, 5 in. x 15 in. stacks operated for up to 10,000 hours and 12 in. x 17 in. five cell stacks were tested for 5,000 hours; (4) a three cell 5 in. x 15 in. stack with 0.12 mg Pt/sq cm anodes and 0.25 mg Pt/sq cm cathodes was operated for 4,500 hours; and (5) an ERC proprietary high bubble pressure matrix, MAT-1, was tested for up to 10,000 hours.
Framework for teleoperated microassembly systems
NASA Astrophysics Data System (ADS)
Reinhart, Gunther; Anton, Oliver; Ehrenstrasser, Michael; Patron, Christian; Petzold, Bernd
2002-02-01
Manual assembly of minute parts is currently done using simple devices such as tweezers or magnifying glasses. The operator therefore requires a great deal of concentration for successful assembly. Teleoperated micro-assembly systems are a promising method for overcoming the scaling barrier. However, most of today's telepresence systems are based on proprietary and one-of-a-kind solutions. Frameworks which supply the basic functions of a telepresence system, e.g. to establish flexible communication links that depend on bandwidth requirements or to synchronize distributed components, are not currently available. Large amounts of time and money have to be invested in order to create task-specific teleoperated micro-assembly systems from scratch. For this reason, an object-oriented framework for telepresence systems that is based on CORBA as a common middleware was developed at the Institute for Machine Tools and Industrial Management (iwb). The framework is based on a distributed architectural concept and is realized in C++. External hardware components such as haptic, video or sensor devices are coupled to the system by means of defined software interfaces. In this case, the special requirements of teleoperation systems have to be considered, e.g. dynamic parameter settings for sensors during operation. Consequently, an architectural concept based on logical sensors has been developed to achieve maximum flexibility and to enable a task-oriented integration of hardware components.
Characterisation of an Exploding Foil Initiator (EFI) system
NASA Astrophysics Data System (ADS)
Davies, H. R.; Chapman, D. J.; Vine, T. A.; Proud, W. G.
2009-06-01
Exploding Foil Initiators (EFIs) provide a safe and reliable means of detonation of explosives. They are highly insensitive to mechanical shock and electrical interference, requiring a specific high current pulse for initiation. The use of only insensitive secondary explosives and not more sensitive primary explosives further improves safety. When a high current is passed through the metal bridge, a plasma is formed as the metal can not expand beyond the polymer film layer above. This causes the film to expand forming a bubble or shearing off to form a flyer. These flyers can then be used to initiate secondary explosives. Due to the very high speed at which these systems operate, high speed streak photography was used to characterise the behaviour of the polymer film flyers produced. This paper will report the preliminary findings on the mechanical, electrical and velocity changes seen in some proprietary systems.
Measuring the cost impact of hospital information systems: 1987-1994.
Borzekowski, Ron
2009-09-01
This study measures the impact of information technology (IT) use on hospital operating costs during the late 1980s and early 1990s. Using a proprietary eight-year panel dataset (1987-1994) that catalogues application-level automation for the complete census of the 3000 U.S. hospitals with more than 100 beds, this study finds that both financial/administrative and clinical IT systems at the most thoroughly automated hospitals are associated with declining costs three and five years after adoption. At the application level, declining costs are associated with the adoption of some of the newest technologies, including systems designed for cost management, the administration of managed care contracts, and for both financial and clinical decision support. The association of cost declines with lagged IT as well as the cost patterns at the less automated hospitals both provide some evidence of learning effects.
State of the Art of Proprietary Financial Reporting in the Department of the Navy.
1996-12-01
statements for fiscal year 1996 and beyond. Proprietary financial reporting focuses on the creation, management, and use of all resources (assets) of...an organization, not just on expendable funds. This thesis provides a comprehensive overview of the state of the art of proprietary financial reporting in...comparison between Federal government and private sector financial reporting . An analysis of the form and content of the primary proprietary reports, the
ERIC Educational Resources Information Center
Community Child Care Council of Sonoma County, Santa Rosa, CA.
Surveys were made of the salaries, benefits, and working conditions of child care professionals in Lake, Marin, Mendocino, Napa, and Sonoma Counties. The centers sampled operated under a variety of auspices. Centers included nonprofit (without subsidized child care spaces), proprietary, public, and subsidized organizations. The survey instrument…
Flexural Testing of Steel Wire Composite Beams Made with Hardwire (trademark) Unidirectional Tape
2003-11-18
Hardwire to carbon fabric in the panels was 85%/15% respectively. The 3XSF Hardwire/fiberglass specimens were made with a 675 yield Type 30 Owens ... Corning glass fiber incorporated into the steel wire cord as shown in Figure 3 in a proprietary co-mingling operation in the cord making process. Ply by
Demonstration of Diesel Engine Air Emissions Reduction Technologies
2008-12-01
16 Figure 5. Plots of Cheyenne Mountain Operating Cycle and Reference CBD Driving...Air Act CARB California Air Resources Board CBD Central Business District CCR California Code of Regulations CES Cummins Emissions Solutions CFR...matter ppb parts per billion ppm parts per million PuriNOx Proprietary Water / Diesel Emulsified Fuel RPF robust particulate filter THC total
Safety performance evaluation of the non-blocked Midwest Guardrail System (MGS).
DOT National Transportation Integrated Search
2013-01-01
The roadway width required to install a guardrail system with a 12-in. (305-mm) blockout is not always available. In : response, proprietary non-blocked W-beam guardrail systems were developed and successfully crash tested. However, the : use of prop...
A COSTAR interface using WWW technology.
Rabbani, U.; Morgan, M.; Barnett, O.
1998-01-01
The concentration of industry on modern relational databases has left many nonrelational and proprietary databases without support for integration with new technologies. Emerging interface tools and data-access methodologies can be applied with difficulty to medical record systems which have proprietary data representation. Users of such medical record systems usually must access the clinical content of such record systems with keyboard-intensive and time-consuming interfaces. COSTAR is a legacy ambulatory medical record system developed over 25 years ago that is still popular and extensively used at the Massachusetts General Hospital. We define a model for using middle layer services to extract and cache data from non-relational databases, and present an intuitive World-Wide Web interface to COSTAR. This model has been implemented and successfully piloted in the Internal Medicine Associates at Massachusetts General Hospital. Images Figure 1 Figure 2 Figure 3 Figure 4 PMID:9929310
An Open Source Simulation System
NASA Technical Reports Server (NTRS)
Slack, Thomas
2005-01-01
An investigation into the current state of the art of open source real time programming practices. This document includes what technologies are available, how easy is it to obtain, configure, and use them, and some performance measures done on the different systems. A matrix of vendors and their products is included as part of this investigation, but this is not an exhaustive list, and represents only a snapshot of time in a field that is changing rapidly. Specifically, there are three approaches investigated: 1. Completely open source on generic hardware, downloaded from the net. 2. Open source packaged by a vender and provided as free evaluation copy. 3. Proprietary hardware with pre-loaded proprietary source available software provided by the vender as for our evaluation.
14 CFR 1203.405 - Proprietary information.
Code of Federal Regulations, 2011 CFR
2011-01-01
... PROGRAM Guides for Original Classification § 1203.405 Proprietary information. Proprietary information made available to NASA is subject to examination for classification purposes under the criteria set... the proposal but believes that security classification would be appropriate under the criteria of...
Lehtomäki, Joona; Tuominen, Sakari; Toivonen, Tuuli; Leinonen, Antti
2015-01-01
The boreal region is facing intensifying resource extraction pressure, but the lack of comprehensive biodiversity data makes operative forest conservation planning difficult. Many countries have implemented forest inventory schemes and are making extensive and up-to-date forest databases increasingly available. Some of the more detailed inventory databases, however, remain proprietary and unavailable for conservation planning. Here, we investigate how well different open and proprietary forest inventory data sets suit the purpose of conservation prioritization in Finland. We also explore how much priorities are affected by using the less accurate but open data. First, we construct a set of indices for forest conservation value based on quantitative information commonly found in forest inventories. These include the maturity of the trees, tree species composition, and site fertility. Secondly, using these data and accounting for connectivity between forest types, we investigate the patterns in conservation priority. For prioritization, we use Zonation, a method and software for spatial conservation prioritization. We then validate the prioritizations by comparing them to known areas of high conservation value. We show that the overall priority patterns are relatively consistent across different data sources and analysis options. However, the coarse data cannot be used to accurately identify the high-priority areas as it misses much of the fine-scale variation in forest structures. We conclude that, while inventory data collected for forestry purposes may be useful for forest conservation purposes, it needs to be detailed enough to be able to account for more fine-scaled features of high conservation value. These results underline the importance of making detailed inventory data publicly available. Finally, we discuss how the prioritization methodology we used could be integrated into operative forest management, especially in countries in the boreal zone. PMID:26317227
Lehtomäki, Joona; Tuominen, Sakari; Toivonen, Tuuli; Leinonen, Antti
2015-01-01
The boreal region is facing intensifying resource extraction pressure, but the lack of comprehensive biodiversity data makes operative forest conservation planning difficult. Many countries have implemented forest inventory schemes and are making extensive and up-to-date forest databases increasingly available. Some of the more detailed inventory databases, however, remain proprietary and unavailable for conservation planning. Here, we investigate how well different open and proprietary forest inventory data sets suit the purpose of conservation prioritization in Finland. We also explore how much priorities are affected by using the less accurate but open data. First, we construct a set of indices for forest conservation value based on quantitative information commonly found in forest inventories. These include the maturity of the trees, tree species composition, and site fertility. Secondly, using these data and accounting for connectivity between forest types, we investigate the patterns in conservation priority. For prioritization, we use Zonation, a method and software for spatial conservation prioritization. We then validate the prioritizations by comparing them to known areas of high conservation value. We show that the overall priority patterns are relatively consistent across different data sources and analysis options. However, the coarse data cannot be used to accurately identify the high-priority areas as it misses much of the fine-scale variation in forest structures. We conclude that, while inventory data collected for forestry purposes may be useful for forest conservation purposes, it needs to be detailed enough to be able to account for more fine-scaled features of high conservation value. These results underline the importance of making detailed inventory data publicly available. Finally, we discuss how the prioritization methodology we used could be integrated into operative forest management, especially in countries in the boreal zone.
47 CFR 76.9 - Confidentiality of proprietary information.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 47 Telecommunication 4 2012-10-01 2012-10-01 false Confidentiality of proprietary information. 76.9 Section 76.9 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE General § 76.9 Confidentiality of proprietary...
47 CFR 76.9 - Confidentiality of proprietary information.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 47 Telecommunication 4 2013-10-01 2013-10-01 false Confidentiality of proprietary information. 76.9 Section 76.9 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE General § 76.9 Confidentiality of proprietary...
47 CFR 76.9 - Confidentiality of proprietary information.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 47 Telecommunication 4 2010-10-01 2010-10-01 false Confidentiality of proprietary information. 76.9 Section 76.9 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE General § 76.9 Confidentiality of proprietary...
47 CFR 76.9 - Confidentiality of proprietary information.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 47 Telecommunication 4 2014-10-01 2014-10-01 false Confidentiality of proprietary information. 76.9 Section 76.9 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE General § 76.9 Confidentiality of proprietary...
47 CFR 76.9 - Confidentiality of proprietary information.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 47 Telecommunication 4 2011-10-01 2011-10-01 false Confidentiality of proprietary information. 76.9 Section 76.9 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE General § 76.9 Confidentiality of proprietary...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Moore, David Steven
2009-01-01
Long term data archiving has much value for chemists, not only to retain access to research and product development records, but also to enable new developments and new discoveries. There are some recent regulatory requirements (e.g., FDA 21 CFR Part 11), but good science and good business both benefit regardless. A particular example of the benefits of and need for long term data archiving is the management of data from spectroscopic laboratory instruments. The sheer amount of spectroscopic data is increasing at a scary rate, and the pressures to archive come from the expense to create the data (or recreatemore » it if it is lost) as well as its high information content. The goal of long-term data archiving is to save and organize instrument data files as well as any needed meta data (such as sample ID, LIMS information, operator, date, time, instrument conditions, sample type, excitation details, environmental parameters, etc.). This editorial explores the issues involved in long-term data archiving using the example of Raman spectral databases. There are at present several such databases, including common data format libraries and proprietary libraries. However, such databases and libraries should ultimately satisfy stringent criteria for long term data archiving, including readability for long times into the future, robustness to changes in computer hardware and operating systems, and use of public domain data formats. The latter criterion implies the data format should be platform independent and the tools to create the data format should be easily and publicly obtainable or developable. Several examples of attempts at spectral libraries exist, such as the ASTM ANDI format, and the JCAMP-DX format. On the other hand, proprietary library spectra can be exchanged and manipulated using proprietary tools. As the above examples have deficiencies according to the three long term data archiving criteria, Extensible Markup Language (XML; a product of the World Wide Web Consortium, an independent standards body) as a new data interchange tool is being investigated and implemented. In order to facilitate data archiving, Raman data needs calibration as well as some other kinds of data treatment. Figure 1 illustrates schematically the present situation for Raman data calibration in the world-wide Raman spectroscopy community, and presents some of the terminology used.« less
17 CFR 75.3 - Prohibition on proprietary trading.
Code of Federal Regulations, 2014 CFR
2014-04-01
... (CONTINUED) PROPRIETARY TRADING AND CERTAIN INTERESTS IN AND RELATIONSHIPS WITH COVERED FUNDS Proprietary... of liquidity management in accordance with a documented liquidity management plan of the banking... liquidity management purposes, the amount, types, and risks of these securities that are consistent with...
17 CFR 255.3 - Prohibition on proprietary trading.
Code of Federal Regulations, 2014 CFR
2014-04-01
... (CONTINUED) PROPRIETARY TRADING AND CERTAIN INTERESTS IN AND RELATIONSHIPS WITH COVERED FUNDS Proprietary... purpose of liquidity management in accordance with a documented liquidity management plan of the banking... liquidity management purposes, the amount, types, and risks of these securities that are consistent with...
PIRATE: A Remotely Operable Telescope Facility for Research and Education
NASA Astrophysics Data System (ADS)
Holmes, S.; Kolb, U.; Haswell, C. A.; Burwitz, V.; Lucas, R. J.; Rodriguez, J.; Rolfe, S. M.; Rostron, J.; Barker, J.
2011-10-01
We introduce PIRATE, a new remotely operable telescope facility for use in research and education, constructed from off-the-shelf hardware, operated by The Open University. We focus on the PIRATE Mark 1 operational phase, in which PIRATE was equipped with a widely used 0.35 m Schmidt-Cassegrain system (now replaced with a 0.425 m corrected Dall-Kirkham astrograph). Situated at the Observatori Astronòmic de Mallorca, PIRATE is currently used to follow up potential transiting extrasolar planet candidates produced by the SuperWASP North experiment, as well as to hunt for novae in M31 and other nearby galaxies. It is operated by a mixture of commercially available software and proprietary software developed at the Open University. We discuss problems associated with performing precision time-series photometry when using a German Equatorial Mount, investigating the overall performance of such off-the-shelf solutions in both research and teaching applications. We conclude that PIRATE is a cost-effective research facility, and it also provides exciting prospects for undergraduate astronomy. PIRATE has broken new ground in offering practical astronomy education to distance-learning students in their own homes.
47 CFR 8.16 - Confidentiality of proprietary information.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 47 Telecommunication 1 2013-10-01 2013-10-01 false Confidentiality of proprietary information. 8.16 Section 8.16 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRESERVING THE OPEN INTERNET § 8.16 Confidentiality of proprietary information. (a) Any materials filed in the course of a...
47 CFR 8.16 - Confidentiality of proprietary information.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 47 Telecommunication 1 2014-10-01 2014-10-01 false Confidentiality of proprietary information. 8.16 Section 8.16 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRESERVING THE OPEN INTERNET § 8.16 Confidentiality of proprietary information. (a) Any materials filed in the course of a...
47 CFR 8.16 - Confidentiality of proprietary information.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 47 Telecommunication 1 2012-10-01 2012-10-01 false Confidentiality of proprietary information. 8.16 Section 8.16 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRESERVING THE OPEN INTERNET § 8.16 Confidentiality of proprietary information. (a) Any materials filed in the course of a...
14 CFR 1274.921 - Publications and reports: non-proprietary research results.
Code of Federal Regulations, 2012 CFR
2012-01-01
... research results. 1274.921 Section 1274.921 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE... Publications and reports: non-proprietary research results. The requirements set forth under this provision may... cooperative agreement. Publications and Reports: Non-Proprietary Research Results July 2002 (a) NASA...
47 CFR 8.16 - Confidentiality of proprietary information.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 47 Telecommunication 1 2011-10-01 2011-10-01 false Confidentiality of proprietary information. 8.16 Section 8.16 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRESERVING THE OPEN INTERNET § 8.16 Confidentiality of proprietary information. (a) Any materials filed in the course of a...
Marchant, Carol A; Briggs, Katharine A; Long, Anthony
2008-01-01
ABSTRACT Lhasa Limited is a not-for-profit organization that exists to promote the sharing of data and knowledge in chemistry and the life sciences. It has developed the software tools Derek for Windows, Meteor, and Vitic to facilitate such sharing. Derek for Windows and Meteor are knowledge-based expert systems that predict the toxicity and metabolism of a chemical, respectively. Vitic is a chemically intelligent toxicity database. An overview of each software system is provided along with examples of the sharing of data and knowledge in the context of their development. These examples include illustrations of (1) the use of data entry and editing tools for the sharing of data and knowledge within organizations; (2) the use of proprietary data to develop nonconfidential knowledge that can be shared between organizations; (3) the use of shared expert knowledge to refine predictions; (4) the sharing of proprietary data between organizations through the formation of data-sharing groups; and (5) the use of proprietary data to validate predictions. Sharing of chemical toxicity and metabolism data and knowledge in this way offers a number of benefits including the possibilities of faster scientific progress and reductions in the use of animals in testing. Maximizing the accessibility of data also becomes increasingly crucial as in silico systems move toward the prediction of more complex phenomena for which limited data are available.
Modeling and Simulation Tools for Heavy Lift Airships
NASA Technical Reports Server (NTRS)
Hochstetler, Ron; Chachad, Girish; Hardy, Gordon; Blanken, Matthew; Melton, John
2016-01-01
For conventional fixed wing and rotary wing aircraft a variety of modeling and simulation tools have been developed to provide designers the means to thoroughly investigate proposed designs and operational concepts. However, lighter-than-air (LTA) airships, hybrid air vehicles, and aerostats have some important aspects that are different from heavier-than-air (HTA) vehicles. In order to account for these differences, modifications are required to the standard design tools to fully characterize the LTA vehicle design and performance parameters.. To address these LTA design and operational factors, LTA development organizations have created unique proprietary modeling tools, often at their own expense. An expansion of this limited LTA tool set could be accomplished by leveraging existing modeling and simulation capabilities available in the National laboratories and public research centers. Development of an expanded set of publicly available LTA modeling and simulation tools for LTA developers would mitigate the reliance on proprietary LTA design tools in use today. A set of well researched, open source, high fidelity LTA design modeling and simulation tools would advance LTA vehicle development and also provide the analytical basis for accurate LTA operational cost assessments. This paper will present the modeling and analysis tool capabilities required for LTA vehicle design, analysis of operations, and full life-cycle support. A survey of the tools currently available will be assessed to identify the gaps between their capabilities and the LTA industry's needs. Options for development of new modeling and analysis capabilities to supplement contemporary tools will also be presented.
Assessment of tri-dyne precast concrete panels.
DOT National Transportation Integrated Search
2008-01-01
Tri-Dyne Industries has developed precast concrete paving slabs (PCPS) that connect using tongue and groove joints and overlap joints, as shown in Figure 1 (1). This proprietary system is referred to as the Pro-Active Paving SystemTM and consis...
MATCON MODIFIED ASPHALT COVER CONTAINMENT SYSTEM DEMONSTRATION
In order to make improvements to conventional paving asphalt to make it more suitable for containment applications, Wilder Construction Co. of Everett, WA offers MatCon, a polymer modified asphalt system comprised of proprietary binder, when coupled with a selected aggregate type...
19 CFR 351.306 - Use of business proprietary information.
Code of Federal Regulations, 2010 CFR
2010-04-01
... that originally submitted the item (e.g., Petitioner, Respondent A, Respondent B). Business proprietary... 19 Customs Duties 3 2010-04-01 2010-04-01 false Use of business proprietary information. 351.306 Section 351.306 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND...
28 CFR 100.20 - Confidentiality of trade secrets/proprietary information.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Confidentiality of trade secrets/proprietary information. 100.20 Section 100.20 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) COST... trade secrets/proprietary information. With respect to any information provided to the FBI under this...
28 CFR 100.20 - Confidentiality of trade secrets/proprietary information.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Confidentiality of trade secrets/proprietary information. 100.20 Section 100.20 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) COST... trade secrets/proprietary information. With respect to any information provided to the FBI under this...
28 CFR 100.20 - Confidentiality of trade secrets/proprietary information.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Confidentiality of trade secrets/proprietary information. 100.20 Section 100.20 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) COST... trade secrets/proprietary information. With respect to any information provided to the FBI under this...
28 CFR 100.20 - Confidentiality of trade secrets/proprietary information.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Confidentiality of trade secrets/proprietary information. 100.20 Section 100.20 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) COST... trade secrets/proprietary information. With respect to any information provided to the FBI under this...
28 CFR 100.20 - Confidentiality of trade secrets/proprietary information.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Confidentiality of trade secrets/proprietary information. 100.20 Section 100.20 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) COST... trade secrets/proprietary information. With respect to any information provided to the FBI under this...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Poddar, S.K.; Chum, K.; Ragsdale, R.
1995-09-01
Sulfur and olefins content of gasoline come primarily from the cat-cracked blendstock. Therefore hydrotreating cat cracked naphtha is a straight forward approach to reduce sulfur and olefin contents of gasoline and thereby reduce auto exhaust emission. However, this approach reduces the Octane number of gasoline which requires addition of Octane enhancer like MTBE to meet the stringent requirement of 1990 Clean Air Act Amendments and to produce Reformulated Gasoline (RFG). The paper examines the economic incentives of an innovative process technology which was developed and commercialized by Mobil known as OCTGAIN. The process utilizes fixed bed low pressure hardware andmore » uses a Mobil proprietary catalyst system to produce catalytically cracked (CC) gasoline component with thorough desulfurization and olefin reduction and practically no loss in Octane number. The economic evaluation of the OCTGAIN technology was conducted with Bechtel`s proprietary linear programming software, Process Industry Modeling System by introducing an OCTGAIN process block to a typical PADD-3 refinery configuration for gasoline production and satisfying RFG specifications. The results of the evaluation which involved twenty case studies, show that within the limitations of the study scope, the introduction of OCTGAIN technology creates a definite economic incentive over conventional hydrofinishing of CC naphtha. The profitability of OCTGAIN technology is dependent on the aromatics component of the gasoline pool. The economic advantage of OCTGAIN technology is realized primarily by higher production of premium gasoline and the ability to process lower cost high sulfur crude. The process also allows a better utilization of the FCCU and hydrocracker, if the refinery operation permits.« less
Multimedia systems overview: the big picture
NASA Astrophysics Data System (ADS)
Riccomi, Alfred
1993-01-01
The golden opportunities represented by multimedia systems have been recognized by many. The risk and cost involved in developing the products and the markets has led to a bonanza of unlikely consortia of strange bedfellows. The premier promoter of personal computing systems, Apple Computer, has joined forces with the dominant supplier of corporate computing, IBM, to form a multimedia technology joint venture called Kaleida. The consumer electronics world's leading promoter of free trade, Sony, has joined forces with the leader of Europe's protectionist companies, Philips, to create a consumer multimedia standard called CD-I. While still paying lip service to CD-I, Sony and Philips now appear to be going their separate ways. The software world's most profitable/fastest growing firm, Microsoft, has entered into alliances with each and every multimedia competitor to create a mish mash of product classes and defacto standards. The battle for Multimedia Standards is being fought on all fronts: on standards committees, in corporate strategic marketing meetings, within industry associations, in computer retail stores, and on the streets. Early attempts to set proprietary defacto standards were fought back, but the proprietary efforts continue with renewed vigor. Standards committees were, as always, slow to define specifications, but the official standards are now known nd being implemented; ... but the proprietary efforts continue with renewed vigor. Ultimately, the buyers will decide -- like it or not. Success by the efforts to establish proprietary defacto standards could prove to be a boon to the highly creative and inventive U.S. firms, but at the cost of higher prices for consumers and slower market growth. Success by the official standards could bring lower prices for consumers and fast market growth, but force the higher-wage/higher-overhead U.S. firms to compete on a level playing field. As is always the case, you can't have your cake and eat it too.
75 FR 38504 - Meetings of the Naval Research Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-02
... Centers (UARCs)); will consider the technical quality of the workforce and physical infrastructure; will review proprietary information regarding technology applications and systems under development in the...
78 FR 25490 - Corporate Capital Trust, Inc., et al.; Notice of Application
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-01
... Proprietary Accounts (defined below), the ``Existing Affiliated Investors''). Filing Dates: The application... Proprietary Account; or (c) any Future Affiliated Fund. An Existing Affiliated Investor, other than KFN, is an... Investors' investment advisory agreements). 14. The KKR Proprietary Accounts will not be permitted to invest...
14 CFR 1274.921 - Publications and reports: non-proprietary research results.
Code of Federal Regulations, 2013 CFR
2013-01-01
... media in which the research was discussed. The Recipient shall submit the following technical reports... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Publications and reports: non-proprietary... Publications and reports: non-proprietary research results. The requirements set forth under this provision may...
14 CFR § 1274.921 - Publications and reports: non-proprietary research results.
Code of Federal Regulations, 2014 CFR
2014-01-01
... media in which the research was discussed. The Recipient shall submit the following technical reports... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Publications and reports: non-proprietary... Publications and reports: non-proprietary research results. The requirements set forth under this provision may...
47 CFR 51.335 - Notice of network changes: Confidential or proprietary information.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 47 Telecommunication 3 2010-10-01 2010-10-01 false Notice of network changes: Confidential or proprietary information. 51.335 Section 51.335 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED... Carriers § 51.335 Notice of network changes: Confidential or proprietary information. (a) If an incumbent...
47 CFR 51.335 - Notice of network changes: Confidential or proprietary information.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 47 Telecommunication 3 2011-10-01 2011-10-01 false Notice of network changes: Confidential or proprietary information. 51.335 Section 51.335 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED... Carriers § 51.335 Notice of network changes: Confidential or proprietary information. (a) If an incumbent...
19 CFR 351.306 - Use of business proprietary information.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 19 Customs Duties 3 2011-04-01 2011-04-01 false Use of business proprietary information. 351.306 Section 351.306 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Information and Argument § 351.306 Use of business proprietary information. (a) By the...
15 CFR 1160.6 - Proprietary data.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 15 Commerce and Foreign Trade 3 2013-01-01 2013-01-01 false Proprietary data. 1160.6 Section 1160... Private Sector Industrial Technology Partnerships § 1160.6 Proprietary data. All persons making a request under this part are cautioned that data submitted to the Department may be available for dissemination...
A Perceptual Measure of the Degree of Development of Proprietary Equipment.
ERIC Educational Resources Information Center
Cua, Kristy O.; Junttila, Mikko A.; Schroeder, Roger G.
2002-01-01
Evaluated the psychometric properties of a perceptual measure of the extent to which manufacturing organizations develop proprietary equipment, the Proprietary Equipment Scale (developed by the World Class Manufacturing study). Analysis of data from 164 manufacturing plants in 5 countries indicates that although method effects are present, the…
27 CFR 6.27 - Proprietary interest.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Proprietary interest. 6.27... OF THE TREASURY ALCOHOL âTIED-HOUSEâ Unlawful Inducements Interest in Retail License § 6.27 Proprietary interest. (a) Complete ownership. Outright ownership of a retail business by an industry member is...
27 CFR 6.33 - Proprietary interest.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Proprietary interest. 6.33... OF THE TREASURY LIQUORS âTIED-HOUSEâ Unlawful Inducements Interest in Retail Property § 6.33 Proprietary interest. (a) Complete ownership. Outright ownership of a retail business by an industry member is...
27 CFR 6.33 - Proprietary interest.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Proprietary interest. 6.33... OF THE TREASURY ALCOHOL âTIED-HOUSEâ Unlawful Inducements Interest in Retail Property § 6.33 Proprietary interest. (a) Complete ownership. Outright ownership of a retail business by an industry member is...
27 CFR 6.27 - Proprietary interest.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Proprietary interest. 6.27... OF THE TREASURY LIQUORS âTIED-HOUSEâ Unlawful Inducements Interest in Retail License § 6.27 Proprietary interest. (a) Complete ownership. Outright ownership of a retail business by an industry member is...
Causes and prevention of herb-induced aconite poisonings in Asia.
Chan, Thomas Y K
2011-12-01
The recent reports from Hong Kong, Taiwan, China and Korea were reviewed to determine the causes and prospects for prevention of herb-induced aconite poisonings. The contributory factors included overdose (use of greater than the recommended doses), faulty processing (after harvest and during decoction), use of tincture (herbal medicinal wine), use of crude aconite roots (for preparing decoction, proprietary medicines and tincture), lack of standardisation in processing of aconite roots and preparation of tincture and proprietary medicines, unsupervised use of aconite roots and contamination or mix-up with aconite roots. As tincture (herbal medicinal wine) made from aconite roots contains a much larger amount of Aconitum alkaloids, the public should be strongly discouraged from making their own and taking it by mouth. Aconite roots should only be used after post-harvest processing and proper decoction. The public should be educated on the hazards from unsupervised use and improper decoction of processed aconite roots. There should be regular publicity measures to promote awareness among the herbalists and to publicise the risk of serious cardiotoxicity if the recommended doses of processed aconite roots are exceeded. The processing of aconite roots and their proprietary preparations should be standardised. Quality control of processed aconite roots and their proprietary preparations should be strengthened. National reporting or monitoring systems can be used to identify the causes of aconite poisonings and assess the impact of preventive measures.
Speedwriting--The Proven One-Year Shorthand System.
ERIC Educational Resources Information Center
Schindler, Irene
Emma Dearborn originated the Speedwriting Alphabetic Shorthand in 1924. The system became well known in 1928 when it became the first shorthand system publicized for dual use in verbatim recording and selected notetaking. For the next 50 years, speedwriting was marketed in a franchise arrangement with proprietary schools. It became available to…
Changing Course Management Systems: Lessons Learned
ERIC Educational Resources Information Center
Smart, Kathy A.; Meyer, Katrina A.
2005-01-01
During 2003, the North Dakota University System began to be concerned about the cost of supporting multiple course management systems. Since 1997, the 11 NDUS institutions had used 9 different course management packages, including one homegrown product (HTMLeZ) and such proprietary products as Blackboard, WebCT, and e-College. The University of…
48 CFR 209.571-6 - Identification of organizational conflicts of interest.
Code of Federal Regulations, 2014 CFR
2014-10-01
... business units performing systems engineering and technical assistance, professional services, or... parent corporate entity, particularly the award of a subcontract for software integration or the development of a proprietary software system architecture; and (c) The performance by, or assistance of...
48 CFR 209.571-6 - Identification of organizational conflicts of interest.
Code of Federal Regulations, 2013 CFR
2013-10-01
... business units performing systems engineering and technical assistance, professional services, or... parent corporate entity, particularly the award of a subcontract for software integration or the development of a proprietary software system architecture; and (c) The performance by, or assistance of...
48 CFR 209.571-6 - Identification of organizational conflicts of interest.
Code of Federal Regulations, 2012 CFR
2012-10-01
... business units performing systems engineering and technical assistance, professional services, or... parent corporate entity, particularly the award of a subcontract for software integration or the development of a proprietary software system architecture; and (c) The performance by, or assistance of...
9 CFR 72.13 - Permitted dips and procedures.
Code of Federal Regulations, 2010 CFR
2010-01-01
... proprietary brands of permitted dips—as well the use of compressed air, vat management techniques, and other... proprietary brands of a Dioxathion (Delnav ®) emulsifiable concentrate used at a concentration of 0.125 to 0.150 percent. 4 (2) Approved proprietary brands of coumaphos (Co-Ral ®), 25 percent wettable powder or...
29 CFR Appendix B to Part 510 - Nonmanufacturing Industries Eligible for Minimum Wage Phase-In
Code of Federal Regulations, 2014 CFR
2014-07-01
... service paper. 512 1 Drugs, drug proprietaries, and druggists' sundries. 5122 1 Drugs, drug proprietaries... places. 59 1 Miscellaneous retail. 591 1 Drug stores and proprietary stores. 5912 1 Drug stores and... merchandise stores. 594 1 Miscellaneous shopping goods stores. 5941 1 Sporting goods stores and bicycle shops...
29 CFR Appendix B to Part 510 - Nonmanufacturing Industries Eligible for Minimum Wage Phase-In
Code of Federal Regulations, 2012 CFR
2012-07-01
... service paper. 512 1 Drugs, drug proprietaries, and druggists' sundries. 5122 1 Drugs, drug proprietaries... places. 59 1 Miscellaneous retail. 591 1 Drug stores and proprietary stores. 5912 1 Drug stores and... merchandise stores. 594 1 Miscellaneous shopping goods stores. 5941 1 Sporting goods stores and bicycle shops...
29 CFR Appendix B to Part 510 - Nonmanufacturing Industries Eligible for Minimum Wage Phase-In
Code of Federal Regulations, 2013 CFR
2013-07-01
... service paper. 512 1 Drugs, drug proprietaries, and druggists' sundries. 5122 1 Drugs, drug proprietaries... places. 59 1 Miscellaneous retail. 591 1 Drug stores and proprietary stores. 5912 1 Drug stores and... merchandise stores. 594 1 Miscellaneous shopping goods stores. 5941 1 Sporting goods stores and bicycle shops...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-22
... conduct proprietary trading, market- making and/or that effect transactions on behalf of broker dealers... organizations that conduct proprietary trading, market-making and/or that effect transactions on behalf of... organizations that conduct proprietary trading, market-making and/or that effect transactions on behalf of...
Government Technology Acquisition Policy: The Case of Proprietary versus Open Source Software
ERIC Educational Resources Information Center
Hemphill, Thomas A.
2005-01-01
This article begins by explaining the concepts of proprietary and open source software technology, which are now competing in the marketplace. A review of recent individual and cooperative technology development and public policy advocacy efforts, by both proponents of open source software and advocates of proprietary software, subsequently…
27 CFR 6.33 - Proprietary interest.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Proprietary interest. 6.33 Section 6.33 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS âTIED-HOUSEâ Unlawful Inducements Interest in Retail Property § 6.33 Proprietary interest. (a) Complete ownership....
27 CFR 6.27 - Proprietary interest.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Proprietary interest. 6.27 Section 6.27 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS âTIED-HOUSEâ Unlawful Inducements Interest in Retail License § 6.27 Proprietary interest. (a) Complete ownership....
27 CFR 6.27 - Proprietary interest.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Proprietary interest. 6.27 Section 6.27 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS âTIED-HOUSEâ Unlawful Inducements Interest in Retail License § 6.27 Proprietary interest. (a) Complete ownership....
27 CFR 6.33 - Proprietary interest.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Proprietary interest. 6.33 Section 6.33 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS âTIED-HOUSEâ Unlawful Inducements Interest in Retail Property § 6.33 Proprietary interest. (a) Complete ownership....
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-23
... has developed a proprietary SectorSAM \\TM\\ quantitative research and evaluation process that forecasts... and short portfolios as dictated by its proprietary SectorSAM quantitative research and evaluation... a proprietary quantitative analysis, to forecast each sector's excess return within a specific time...
Code of Federal Regulations, 2013 CFR
2013-01-01
... in Prohibited Proprietary Trading or Private Fund Activities. 225.181 Section 225.181 Banks and... Trading and Relationships With Hedge Funds and Private Equity Funds § 225.181 Conformance Period for Banking Entities Engaged in Prohibited Proprietary Trading or Private Fund Activities. (a) Conformance...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-11
...] Pilot Program To Evaluate Proposed Proprietary Name Submissions; Public Meeting on Pilot Program Results... voluntary pilot program that enabled participating pharmaceutical firms to evaluate proposed proprietary... public meeting at the end of fiscal year 2011 to discuss the results of the pilot program, but the Agency...
A Monitoring System for Vegetable Greenhouses based on a Wireless Sensor Network
Li, Xiu-hong; Cheng, Xiao; Yan, Ke; Gong, Peng
2010-01-01
A wireless sensor network-based automatic monitoring system is designed for monitoring the life conditions of greenhouse vegetatables. The complete system architecture includes a group of sensor nodes, a base station, and an internet data center. For the design of wireless sensor node, the JN5139 micro-processor is adopted as the core component and the Zigbee protocol is used for wireless communication between nodes. With an ARM7 microprocessor and embedded ZKOS operating system, a proprietary gateway node is developed to achieve data influx, screen display, system configuration and GPRS based remote data forwarding. Through a Client/Server mode the management software for remote data center achieves real-time data distribution and time-series analysis. Besides, a GSM-short-message-based interface is developed for sending real-time environmental measurements, and for alarming when a measurement is beyond some pre-defined threshold. The whole system has been tested for over one year and satisfactory results have been observed, which indicate that this system is very useful for greenhouse environment monitoring. PMID:22163391
Brewer, Zachary E; Fann, Hutchinson C; Ogden, W David; Burdon, Thomas A; Sheikh, Ahmad Y
2016-01-01
It is speculated that, in operative environments, real-time visualization of the trainee's viewpoint by the instructor may improve performance and teaching efficacy. We hypothesized that introduction of a wearable surgical visualization system allowing the instructor to visualize otherwise "blind" areas in the operative field could improve trainee performance in a simulated operative setting. A total of 11 surgery residents (4 in general surgery training and 7 in an integrated 6-year cardiothoracic surgery program) participated in the study. Google (Mountain View, CA) Glass hardware running proprietary software from CrowdOptic (San Francisco, CA) was utilized for creation of the wearable surgical visualization system. Both the learner and trainer wore the system, and video was streamed from the learner's system in real time to the trainer, who directed the learner to place needles in a simulated operative field. Subjects placed a total of 5 needles in each of 4 quadrants. A composite error score was calculated based on the accuracy of needle placement in relation to the intended needle trajectories as described by the trainer. Time to task completion (TTC) was also measured and participants completed an exit questionnaire. All residents completed the protocol tasks and the survey. Introduction of the wearable surgical visualization system did not affect mean time to task completion (278 ± 50 vs. 282 ± 69 seconds, p = NS). However, mean composite error score fell significantly once the wearable system was deployed (18 ± 5 vs. 15 ± 4, p < 0.05), demonstrating improved accuracy of needle placement. Most of the participants deemed the device unobtrusive, easy to operate, and useful for communication and instruction. This study suggests that wearable surgical visualization systems allowing for adoption of the learner's perspective may be a useful educational adjunct in the training of surgeons. Further evaluations of the efficacy of wearable technology in the operating room environment are warranted. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.
NASA Technical Reports Server (NTRS)
1986-01-01
American Water Corporation manufactures water filtration products which incorporate technology originally developed for manned space operations. The formula involves granular activated charcoal and other ingredients, and removes substances by catalytic reactions, mechanical filtration, and absorption. Details are proprietary. A NASA literature search contributed to development of the compound. The technology is being extended to a deodorizing compound called Biofresh which traps gas and moisture inside the unit. Further applications are anticipated.
A Review of Software Maintenance Technology.
1980-02-01
LABS HONEYWELL, REF BURROUGHS, OTHERS BOOLE £ LANGUAGE "PE BABBAGE , OPERATIONAL INDEPENDENT 4.2.17 INC. IBM H M RELIABILITY MOST LARGE U. MEASUREMENT...80-13 ML llluuluunuuuuu SmeeI..... f. Maintenance Experience (1) Multiple Implementation Charles Holmes (Source 2) described two attempts at McDonnell...proprietary software monitor package distributed by Boole and Babbage , Inc., Sunnyvale, California. it has been implemented on IBM computers and is language
Achieving Accountability in Cyberspace: Revolution or Evolution?
2014-01-01
hours, the malware propagates throughout both networks and begins to beacon to a site known for its state - sponsored cyberspace espionage activities...installation in the United States , communications personnel in a tenant unit, whose primary unclassified operating network is neither owned nor...protect its unclas- sified proprietary network. A known nation- state actor gains access to the company’s network and begins to exfil- trate megabytes
"Opening" a New Kind of High School: The Story of the Open High School of Utah
ERIC Educational Resources Information Center
Tonks, DeLaina; Weston, Sarah; Wiley, David; Barbour, Michael K.
2013-01-01
The use of online learning at the primary and secondary school level is growing exponentially in the United States. Much of this growth is with full-time online schools, most of which are operated by for-profit companies that use proprietary online course content. In this article we trace the development of, and philosophy behind, a full-time…
27 CFR 20.113 - Proprietary solvents general-use formula.
Code of Federal Regulations, 2010 CFR
2010-04-01
.... (a) A proprietary solvent is any article made with any other ingredients combined with the ingredients in the minimum ratios prescribed in this section. A proprietary solvent shall be made with S.D.A...,” “vapor harmful,” “May be fatal or cause blindness if swallowed,” and “Cannot be made nonpoisonous.” ...
27 CFR 20.113 - Proprietary solvents general-use formula.
Code of Federal Regulations, 2012 CFR
2012-04-01
.... (a) A proprietary solvent is any article made with any other ingredients combined with the ingredients in the minimum ratios prescribed in this section. A proprietary solvent shall be made with S.D.A...,” “vapor harmful,” “May be fatal or cause blindness if swallowed,” and “Cannot be made nonpoisonous.” ...
27 CFR 20.113 - Proprietary solvents general-use formula.
Code of Federal Regulations, 2011 CFR
2011-04-01
.... (a) A proprietary solvent is any article made with any other ingredients combined with the ingredients in the minimum ratios prescribed in this section. A proprietary solvent shall be made with S.D.A...,” “vapor harmful,” “May be fatal or cause blindness if swallowed,” and “Cannot be made nonpoisonous.” ...
27 CFR 20.113 - Proprietary solvents general-use formula.
Code of Federal Regulations, 2013 CFR
2013-04-01
.... (a) A proprietary solvent is any article made with any other ingredients combined with the ingredients in the minimum ratios prescribed in this section. A proprietary solvent shall be made with S.D.A...,” “vapor harmful,” “May be fatal or cause blindness if swallowed,” and “Cannot be made nonpoisonous.” ...
27 CFR 20.113 - Proprietary solvents general-use formula.
Code of Federal Regulations, 2014 CFR
2014-04-01
.... (a) A proprietary solvent is any article made with any other ingredients combined with the ingredients in the minimum ratios prescribed in this section. A proprietary solvent shall be made with S.D.A...,” “vapor harmful,” “May be fatal or cause blindness if swallowed,” and “Cannot be made nonpoisonous.” ...
Proprietary Hospital Social Work: What Do We Know?
ERIC Educational Resources Information Center
Ortiz, Elizabeth Thompson; Bassoff, Betty Z.
The rapid growth of the proprietary sector in the provision of social services creates a challenge for the social work profession. Little is known about social work services in for-profit organizations or about how they compare to similar non-profit settings. A comparative study was conducted of social work services in proprietary and non-profit…
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-10
... monitoring of proprietary trading, market-making or brokerage activities and/or that is engaged in the supervision or training of those engaged in proprietary trading, market-making or brokerage activities will be... behalf of a broker-dealer account, supervises or monitors proprietary trading, market-making or brokerage...
NASA Astrophysics Data System (ADS)
Curtis, Christopher; Lenzo, Matthew; McClure, Matthew; Preiss, Bruce
2010-04-01
In order to anticipate the constantly changing landscape of global warfare, the United States Air Force must acquire new capabilities in the field of Intelligence, Surveillance, and Reconnaissance (ISR). To meet this challenge, the Air Force Research Laboratory (AFRL) is developing a unifying construct of "Layered Sensing" which will provide military decision-makers at all levels with the timely, actionable, and trusted information necessary for complete battlespace awareness. Layered Sensing is characterized by the appropriate combination of sensors and platforms (including those for persistent sensing), infrastructure, and exploitation capabilities to enable this synergistic awareness. To achieve the Layered Sensing vision, AFRL is pursuing a Modeling & Simulation (M&S) strategy through the Layered Sensing Operations Center (LSOC). An experimental ISR system-of-systems test-bed, the LSOC integrates DoD standard simulation tools with commercial, off-the-shelf video game technology for rapid scenario development and visualization. These tools will help facilitate sensor management performance characterization, system development, and operator behavioral analysis. Flexible and cost-effective, the LSOC will implement a non-proprietary, open-architecture framework with well-defined interfaces. This framework will incentivize the transition of current ISR performance models to service-oriented software design for maximum re-use and consistency. This paper will present the LSOC's development and implementation thus far as well as a summary of lessons learned and future plans for the LSOC.
Tax-exempt/proprietary partnerships: how the deal gets done.
Anthony, M F
1997-01-01
Joint venture partnerships between tax-exempt healthcare providers and proprietary companies represent a type of provider-sponsored network. Tax-exempt /proprietary partnerships can help tax-exempt providers attain their strategic objectives and, at the same time, retain some governance involvement and healthcare decision-making authority. Proprietary companies that enter into such partnerships are able to expand their market presence and revenue potential without spending capital on an acquisition. Proprietary companies also gain the tax-exempt partners' goodwill, which could take them years to develop on their own. Before negotiating a partnership agreement, potential partners must assess their respective financial, cultural, organizational, and strategic strengths and weaknesses as well as their overall compatibility. Then they must develop contract terms to bring into the partnership negotiations. These terms include purpose, legal structure, assets/liabilities, governance, management, valuation, profit/loss sharing, capitalization/working capital, human resources, withdrawal from the partnership, noncompete covernants, and tax exemption issues.
A Wireless Sensor Network approach for distributed in-line chemical analysis of water.
Capella, J V; Bonastre, A; Ors, R; Peris, M
2010-03-15
In this work we propose the implementation of a distributed system based on a Wireless Sensor Network for the control of a chemical analysis system for fresh water. This implementation is presented by describing the nodes that form the distributed system, the communication system by wireless networks, control strategies, and so on. Nitrate, ammonium, and chloride are measured in-line using appropriate ion selective electrodes (ISEs), the results obtained being compared with those provided by the corresponding reference methods. Recovery analyses with ISEs and standard methods, study of interferences, and evaluation of major sensor features have also been carried out. The communication among the nodes that form the distributed system is implemented by means of the utilization of proprietary wireless networks, and secondary data transmission services (GSM or GPRS) provided by a mobile telephone operator. The information is processed, integrated and stored in a control center. These data can be retrieved--through the Internet--so as to know the real-time system status and its evolution. Copyright (c) 2009 Elsevier B.V. All rights reserved.
Efficient low-power wireless communication setup for an autonomous soil moisture sensor
NASA Astrophysics Data System (ADS)
Surducan, Vasile; Surducan, Emanoil
2017-12-01
During July 2016 - September 2017, a micro-irrigation system was set up and tested in field and greenhouse-like conditions, using eight inexpensive soil moisture sensors designed and manufactured in our institute. Each sensor was powered by accumulators charged by an (8 × 14) cm2 solar panel. The energy budget was carefully managed to allow long operating time for both the moisture sensor and the irrigation automation. We present here the hardware-software setup implemented in our proprietary moisture sensor for wireless communication, using Bluetooth Low Energy modules (BLE). The autonomy of the system may reach 4-5 cloudy days without the need of recharging the accumulators from the sun. Over the entire operating period, the moisture sensors send data wirelessly every sampling time (15 to 30 minutes) following water drips on the soil for the next 30 seconds, pushed by a low power micro pump. The micro-irrigation process is repeated every sampling time, until the soil moisture threshold is reached. In between the operating states, the sensor and watering automation go to sleep. The software algorithm ensures low energy (max. 2.8 mWh) consumption for the moisture sensor and 20 mWh for the irrigation automation, substantially increasing the accumulators discharge cycle.
Kong, D; Gentz, R; Zhang, J
1998-03-01
Monocyte-colony inhibition factor (M-CIF) was produced in microcarrier perfusion cultures from engineered Chinese hamster ovary (CHO) cells. Three and fifteen liter microcarrier perfusion bioreactors equipped with internal spin filters were operated for over two months. Approximately 60 L and 300 L of culture filtrate were harvested from the 3L and 15L microcarrier perfusion bioreactors respectively. During the perfusion operation, cell density reached 2-6 × 10(6) cells/ml. Importantly, stable expression of M-CIF from the CHO cells under non-selection condition was maintained at a level of 4-10 mg/L. Specific productivity was maintained at 1.8-3.4 mg/billion cells/day. The ability of the recombinant CHO cells to migrate from microcarrier to microcarrier under our proprietary HGS-CHO-3 medium greatly facilitated microcarrier culture scale-up and microcarrier replenishment. Future directions for microcarrier perfusion system scale-up and process development are highlighted.
The TERRAMET® soil remediation system leaches and recovers lead (including metallic lead, and lead salts and oxides), and other metals from contaminated soil, sludge, or sediment. The system uses a proprietary aqueous leachant that is optimized through treatability tests for the ...
48 CFR 903.104-7 - Violations or possible violations.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Violations or possible violations. 903.104-7 Section 903.104-7 Federal Acquisition Regulations System DEPARTMENT OF ENERGY GENERAL... disclosure of proprietary or source selection information is the Assistant General Counsel for Procurement...
Safeguards by Design Challenge
DOE Office of Scientific and Technical Information (OSTI.GOV)
Alwin, Jennifer Louise
The International Atomic Energy Agency (IAEA) defines Safeguards as a system of inspection and verification of the peaceful uses of nuclear materials as part of the Nuclear Nonproliferation Treaty. IAEA oversees safeguards worldwide. Safeguards by Design (SBD) involves incorporation of safeguards technologies, techniques, and instrumentation during the design phase of a facility, rather that after the fact. Design challenge goals are the following: Design a system of safeguards technologies, techniques, and instrumentation for inspection and verification of the peaceful uses of nuclear materials. Cost should be minimized to work with the IAEA’s limited budget. Dose to workers should always bemore » as low are reasonably achievable (ALARA). Time is of the essence in operating facilities and flow of material should not be interrupted significantly. Proprietary process information in facilities may need to be protected, thus the amount of information obtained by inspectors should be the minimum required to achieve the measurement goal. Then three different design challenges are detailed: Plutonium Waste Item Measurement System, Marine-based Modular Reactor, and Floating Nuclear Power Plant (FNPP).« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jacques Hugo; Ronald Boring; Lew Hanes
2013-09-01
The U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) program is collaborating with a U.S. nuclear utility to bring about a systematic fleet-wide control room modernization. To facilitate this upgrade, a new distributed control system (DCS) is being introduced into the control rooms of these plants. The DCS will upgrade the legacy plant process computer and emergency response facility information system. In addition, the DCS will replace an existing analog turbine control system with a display-based system. With technology upgrades comes the opportunity to improve the overall human-system interaction between the operators and the control room. To optimize operatormore » performance, the LWRS Control Room Modernization research team followed a human-centered approach published by the U.S. Nuclear Regulatory Commission. NUREG-0711, Rev. 3, Human Factors Engineering Program Review Model (O’Hara et al., 2012), prescribes four phases for human factors engineering. This report provides examples of the first phase, Planning and Analysis. The three elements of Planning and Analysis in NUREG-0711 that are most crucial to initiating control room upgrades are: • Operating Experience Review: Identifies opportunities for improvement in the existing system and provides lessons learned from implemented systems. • Function Analysis and Allocation: Identifies which functions at the plant may be optimally handled by the DCS vs. the operators. • Task Analysis: Identifies how tasks might be optimized for the operators. Each of these elements is covered in a separate chapter. Examples are drawn from workshops with reactor operators that were conducted at the LWRS Human System Simulation Laboratory HSSL and at the respective plants. The findings in this report represent generalized accounts of more detailed proprietary reports produced for the utility for each plant. The goal of this LWRS report is to disseminate the technique and provide examples sufficient to serve as a template for other utilities’ projects for control room modernization.« less
Lead-acid battery research and development—a vital key to winning new business
NASA Astrophysics Data System (ADS)
Bullock, Kathryn R.
Battery strings are operated in a partial-state-of-charge mode (PSoC) in several new and changing applications for lead-acid batteries, in which the battery is seldom, if ever, fully charged or discharged. The lead battery industry faces new challenges as additional failure modes become evident in these PSoC applications. Without overcharge, cell imbalances caused by variations in cell temperature will cause premature failures. Valve-regulated lead-acid batteries are especially susceptible because of the heat generated by oxygen recombination at the negative plate. Improved thermal properties are shown by a proprietary battery design that combines absorptive glass mat and gelled acid technologies. Well-designed power systems are also required to reduce cell-to-cell temperature variations and, thereby, increase battery life.
MODULAR MANIPULATOR FOR ROBOTICS APPLICATIONS
DOE Office of Scientific and Technical Information (OSTI.GOV)
Joseph W. Geisinger, Ph.D.
ARM Automation, Inc. is developing a framework of modular actuators that can address the DOE's wide range of robotics needs. The objective of this effort is to demonstrate the effectiveness of this technology by constructing a manipulator from these actuators within a glovebox for Automated Plutonium Processing (APP). At the end of the project, the system of actuators was used to construct several different manipulator configurations, which accommodate common glovebox tasks such as repackaging. The modular nature and quickconnects of this system simplify installation into ''hot'' boxes and any potential modifications or repair therein. This work focused on the developmentmore » of self-contained robotic actuator modules including the embedded electronic controls for the purpose of building a manipulator system. Both of the actuators developed under this project contain the control electronics, sensors, motor, gear train, wiring, system communications and mechanical interfaces of a complete robotics servo device. Test actuators and accompanying DISC{trademark}s underwent validation testing at The University of Texas at Austin and ARM Automation, Inc. following final design and fabrication. The system also included custom links, an umbilical cord, an open architecture PC-based system controller, and operational software that permitted integration into a completely functional robotic manipulator system. The open architecture on which this system is based avoids proprietary interfaces and communication protocols which only serve to limit the capabilities and flexibility of automation equipment. The system was integrated and tested in the contractor's facility for intended performance and operations. The manipulator was tested using the full-scale equipment and process mock-ups. The project produced a practical and operational system including a quantitative evaluation of its performance and cost.« less
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-29
... investments, trading practices and display execution and trading systems. While the examination is primarily... concepts relating to customers.\\5\\ \\5\\ Proprietary trading firms don not have customers. The qualification... Trading Systems, 13 questions. Representatives from the applicable markets intend to meet on a periodic...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-17
... practices and display execution and trading systems. While the Series 56 examination is primarily dedicated to topics related to proprietary trading, the Series 56 examination also covers some general concepts... Practices and Prohibited Acts, 50 questions; and Display, Execution, and Trading Systems, 13 questions...
Comparison: Mediation Solutions of WSMOLX and WebML/WebRatio
NASA Astrophysics Data System (ADS)
Zaremba, Maciej; Zaharia, Raluca; Turati, Andrea; Brambilla, Marco; Vitvar, Tomas; Ceri, Stefano
In this chapter we compare the WSMO/WSML/WSMX andWebML/WebRatio approaches to the SWS-Challenge workshop mediation scenario in terms of the utilized underlying technologies and delivered solutions. In the mediation scenario one partner uses Roset-taNet to define its B2B protocol while the other one operates on a proprietary solution. Both teams shown how these partners could be semantically integrated.
Quantitative assessment of human motion using video motion analysis
NASA Technical Reports Server (NTRS)
Probe, John D.
1993-01-01
In the study of the dynamics and kinematics of the human body a wide variety of technologies has been developed. Photogrammetric techniques are well documented and are known to provide reliable positional data from recorded images. Often these techniques are used in conjunction with cinematography and videography for analysis of planar motion, and to a lesser degree three-dimensional motion. Cinematography has been the most widely used medium for movement analysis. Excessive operating costs and the lag time required for film development, coupled with recent advances in video technology, have allowed video based motion analysis systems to emerge as a cost effective method of collecting and analyzing human movement. The Anthropometric and Biomechanics Lab at Johnson Space Center utilizes the video based Ariel Performance Analysis System (APAS) to develop data on shirtsleeved and space-suited human performance in order to plan efficient on-orbit intravehicular and extravehicular activities. APAS is a fully integrated system of hardware and software for biomechanics and the analysis of human performance and generalized motion measurement. Major components of the complete system include the video system, the AT compatible computer, and the proprietary software.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false When I submit confidential, proprietary information, how can I help ensure that it is not available to the public? 3266.11 Section 3266.11 Public... Information § 3266.11 When I submit confidential, proprietary information, how can I help ensure that it is...
Code of Federal Regulations, 2011 CFR
2011-10-01
... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false When I submit confidential, proprietary information, how can I help ensure it is not available to the public? 3278.11 Section 3278.11 Public Lands... § 3278.11 When I submit confidential, proprietary information, how can I help ensure it is not available...
Code of Federal Regulations, 2011 CFR
2011-10-01
... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false When I submit confidential, proprietary information, how can I help ensure it is not available to the public? 3255.11 Section 3255.11 Public Lands... § 3255.11 When I submit confidential, proprietary information, how can I help ensure it is not available...
Adopting Open Source Software to Address Software Risks during the Scientific Data Life Cycle
NASA Astrophysics Data System (ADS)
Vinay, S.; Downs, R. R.
2012-12-01
Software enables the creation, management, storage, distribution, discovery, and use of scientific data throughout the data lifecycle. However, the capabilities offered by software also present risks for the stewardship of scientific data, since future access to digital data is dependent on the use of software. From operating systems to applications for analyzing data, the dependence of data on software presents challenges for the stewardship of scientific data. Adopting open source software provides opportunities to address some of the proprietary risks of data dependence on software. For example, in some cases, open source software can be deployed to avoid licensing restrictions for using, modifying, and transferring proprietary software. The availability of the source code of open source software also enables the inclusion of modifications, which may be contributed by various community members who are addressing similar issues. Likewise, an active community that is maintaining open source software can be a valuable source of help, providing an opportunity to collaborate to address common issues facing adopters. As part of the effort to meet the challenges of software dependence for scientific data stewardship, risks from software dependence have been identified that exist during various times of the data lifecycle. The identification of these risks should enable the development of plans for mitigating software dependencies, where applicable, using open source software, and to improve understanding of software dependency risks for scientific data and how they can be reduced during the data life cycle.
MoZis: mobile zoo information system: a case study for the city of Osnabrueck
NASA Astrophysics Data System (ADS)
Michel, Ulrich
2007-10-01
This paper describes a new project of the Institute for Geoinformatics and Remote Sensing, funded by the German Federal Foundation for the Environment (DBU, Deutsche Bundesstiftung Umwelt www.dbu.de). The goal of this project is to develop a mobile zoo information system for Pocket PCs and Smart phones. Visitors of the zoo will be able to use their own mobile devices or use Pocket PCs, which could be borrowed from the zoo to navigate around the zoo's facilities. The system will also provide additional multimedia based information such as audio-based material, animal video clips, and maps of their natural habitat. People could have access to the project at the zoo via wireless local area network or by downloading the necessary files using a home internet connection. Our software environment consists of proprietary and non-proprietary software solutions in order to make it as flexible as possible. Our first prototype was developed with Visual Studio 2003 and Visual Basic.Net.
Application and Characteristics of Chinese Herbal Medicine Containing Schisandra
NASA Astrophysics Data System (ADS)
Zhao, Hui; Mao, Mingsan
2018-01-01
Schisandra is the dried and ripe fruit of Chinese magnoliavine, which has the functions of protecting the liver and gallbladder, lowering blood sugar, antibacterial and antiaging. Schisandra contains biological activity is very high. As a commonly used blind Chinese herbal medicine, Schisandra often appear in the treatment of vertigo, palpitations, insomnia in the proprietary Chinese medicine, play a nourishing liver and kidney, nourishing the nerves and so on. Chinese Pharmacopoeia contains a total of 102 kinds of Chinese medicine containing Schisandra, according to the dosage form will contain Schisandra proprietary Chinese medicine is divided into pills, tablets, granules and other 8 categories, according to the compatibility of Schisandra application, will contain Schisandra proprietary Chinese medicine functional Class 9. In this paper, the main clinical application of proprietary Chinese medicines containing Schisandra chinensis was analyzed by analyzing the classification and functional treatment of Chinese medicinal constituents containing Schisandra in pharmacopoeia, and then providing the basis for the analysis of Schisandra in proprietary Chinese medicine and The study is conducted to give guidance.
Radiation-Tolerant, SpaceWire-Compatible Switching Fabric
NASA Technical Reports Server (NTRS)
Katzman, Vladimir
2011-01-01
Current and future near-Earth and deep space exploration programs and space defense programs require the development of robust intra-spacecraft serial data transfer electronics that must be reconfigurable, fault-tolerant, and have the ability to operate effectively for long periods of time in harsh environmental conditions. Existing data transfer systems based on state-of-the-art serial data transfer protocols or passive backplanes are slow, power-hungry, and poorly reconfigurable. They provide limited expandability and poor tolerance to radiation effects and total ionizing dose (TID) in particular, which presents harmful threats to modern submicron electronics. This novel approach is based on a standard library of differential cells tolerant to TID, and patented, multi-level serial interface architecture that ensures the reliable operation of serial interconnects without application of a data-strobe or other encoding techniques. This proprietary, high-speed differential interface presents a lowpower solution fully compatible with the SpaceWire (SW) protocol. It replaces a dual data-strobe link with two identical independent data channels, thus improving the system s tolerance to harsh environments through additional double redundancy. Each channel incorporates an automatic line integrity control circuitry that delivers error signals in case of broken or shorted lines.
Heat Rejection from a Variable Conductance Heat Pipe Radiator Panel
NASA Technical Reports Server (NTRS)
Jaworske, D. A.; Gibson, M. A.; Hervol, D. S.
2012-01-01
A titanium-water heat pipe radiator having an innovative proprietary evaporator configuration was evaluated in a large vacuum chamber equipped with liquid nitrogen cooled cold walls. The radiator was manufactured by Advanced Cooling Technologies, Inc. (ACT), Lancaster, PA, and delivered as part of a Small Business Innovative Research effort. The radiator panel consisted of five titanium-water heat pipes operating as thermosyphons, sandwiched between two polymer matrix composite face sheets. The five variable conductance heat pipes were purposely charged with a small amount of non-condensable gas to control heat flow through the condenser. Heat rejection was evaluated over a wide range of inlet water temperature and flow conditions, and heat rejection was calculated in real-time utilizing a data acquisition system programmed with the Stefan-Boltzmann equation. Thermography through an infra-red transparent window identified heat flow across the panel. Under nominal operation, a maximum heat rejection value of over 2200 Watts was identified. The thermal vacuum evaluation of heat rejection provided critical information on understanding the radiator s performance, and in steady state and transient scenarios provided useful information for validating current thermal models in support of the Fission Power Systems Project.
Correale, Jorge; Chiquete, Erwin; Milojevic, Snezana; Frider, Nadina; Bajusz, Imre
2014-01-01
Fingolimod is a once-daily oral treatment for relapsing multiple sclerosis, the proprietary production processes of which are tightly controlled, owing to its susceptibility to contamination by impurities, including genotoxic impurities. Many markets produce nonproprietary medicines; assessing their efficacy and safety is difficult as regulators may approve nonproprietary drugs without bioequivalence data, genotoxic evaluation, or risk management plans (RMPs). This assessment is especially important for fingolimod given its solubility/bioavailability profile, genotoxicity risk, and low-dose final product (0.5 mg). This paper presents an evaluation of the quality of proprietary and nonproprietary fingolimod variants. Proprietary fingolimod was used as a reference substance against which eleven nonproprietary fingolimod copies were assessed. The microparticle size distribution of each compound was assessed by laser light diffraction, and inorganic impurity content by sulfated ash testing. Heavy metals content was quantified using inductively coupled plasma optical emission spectrometry, and levels of unspecified impurities by high-performance liquid chromatography. Solubility was assessed in a range of solvents at different pH values. Key information from the fingolimod RMP is also presented. Nonproprietary fingolimod variants exhibited properties out of proprietary or internationally accepted specifications, including differences in particle size distribution and levels of impurities such as heavy metals. For microparticle size and heavy metals, all tested fingolimod copies were out-of-specification by several-fold magnitudes. Proprietary fingolimod has a well-defined RMP, highlighting known and potential mid- to long-term safety risks, and risk-minimization and pharmacovigilance procedures. Nonproprietary fingolimod copies produced by processes less well controlled than or altered from proprietary production processes may reduce product reproducibility and quality, potentially presenting risks to patients. Safety data and risk-minimization strategies for proprietary fingolimod may not apply to the nonproprietary fingolimod copies evaluated here. Market authorization of nonproprietary fingolimod copies should require an appropriate RMP to minimize risks to patients.
Readout of the upgraded ALICE-ITS
NASA Astrophysics Data System (ADS)
Szczepankiewicz, A.; ALICE Collaboration
2016-07-01
The ALICE experiment will undergo a major upgrade during the second long shutdown of the CERN LHC. As part of this program, the present Inner Tracking System (ITS), which employs different layers of hybrid pixels, silicon drift and strip detectors, will be replaced by a completely new tracker composed of seven layers of monolithic active pixel sensors. The upgraded ITS will have more than twelve billion pixels in total, producing 300 Gbit/s of data when tracking 50 kHz Pb-Pb events. Two families of pixel chips realized with the TowerJazz CMOS imaging process have been developed as candidate sensors: the ALPIDE, which uses a proprietary readout and sparsification mechanism and the MISTRAL-O, based on a proven rolling shutter architecture. Both chips can operate in continuous mode, with the ALPIDE also supporting triggered operations. As the communication IP blocks are shared among the two chip families, it has been possible to develop a common Readout Electronics. All the sensor components (analog stages, state machines, buffers, FIFOs, etc.) have been modelled in a system level simulation, which has been extensively used to optimize both the sensor and the whole readout chain design in an iterative process. This contribution covers the progress of the R&D efforts and the overall expected performance of the ALICE-ITS readout system.
Spectral domain, common path OCT in a handheld PIC based system
NASA Astrophysics Data System (ADS)
Leinse, Arne; Wevers, Lennart; Marchenko, Denys; Dekker, Ronald; Heideman, René G.; Ruis, Roosje M.; Faber, Dirk J.; van Leeuwen, Ton G.; Kim, Keun Bae; Kim, Kyungmin
2018-02-01
Optical Coherence Tomography (OCT) has made it into the clinic in the last decade with systems based on bulk optical components. The next disruptive step will be the introduction of handheld OCT systems. Photonic Integrated Circuit (PIC) technology is the key enabler for this further miniaturization. PIC technology allows signal processing on a stable platform and the implementation of a common path interferometer in that same platform creates a robust fully integrated OCT system with a flexible fiber probe. In this work the first PIC based handheld and integrated common path based spectral domain OCT system is described and demonstrated. The spectrometer in the system is based on an Arrayed Waveguide Grating (AWG) and fully integrated with the CCD and a fiber probe into a system operating at 850 nm. The AWG on the PIC creates a 512 channel spectrometer with a resolution of 0.22 nm enabling a high speed analysis of the full A-scan. The silicon nitride based proprietary waveguide technology (TriPleXTM) enables low loss complex photonic structures from the visible (405 nm) to IR (2350 nm) range, making it a unique candidate for OCT applications. Broadband AWG operation from visible to 1700 nm has been shown in the platform and Photonic Design Kits (PDK) are available enabling custom made designs in a system level design environment. This allows a low threshold entry for designing new (OCT) designs for a broad wavelength range.
10 CFR 205.303 - Required exhibits.
Code of Federal Regulations, 2013 CFR
2013-01-01
... DEPARTMENT OF ENERGY OIL ADMINISTRATIVE PROCEDURES AND SANCTIONS Electric Power System Permits and Reports; Applications; Administrative Procedures and Sanctions Application for Authorization to Transmit Electric Energy... must identify such data and include a statement explaining why proprietary treatment is appropriate. (b...
10 CFR 205.303 - Required exhibits.
Code of Federal Regulations, 2014 CFR
2014-01-01
... DEPARTMENT OF ENERGY OIL ADMINISTRATIVE PROCEDURES AND SANCTIONS Electric Power System Permits and Reports; Applications; Administrative Procedures and Sanctions Application for Authorization to Transmit Electric Energy... must identify such data and include a statement explaining why proprietary treatment is appropriate. (b...
10 CFR 205.303 - Required exhibits.
Code of Federal Regulations, 2012 CFR
2012-01-01
... DEPARTMENT OF ENERGY OIL ADMINISTRATIVE PROCEDURES AND SANCTIONS Electric Power System Permits and Reports; Applications; Administrative Procedures and Sanctions Application for Authorization to Transmit Electric Energy... must identify such data and include a statement explaining why proprietary treatment is appropriate. (b...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-06
... amending Section 11 to include a definition of ``System routing table,'' defined as the proprietary process... Locked and Crossed Market Rules. \\3\\ Nasdaq has previously defined the term ``System routing table'' in... better value is the essence of a well-functioning competitive marketplace. The Exchange also believes...
Small business innovation research. Abstracts of 1988 phase 1 awards
NASA Technical Reports Server (NTRS)
1990-01-01
Non-proprietary proposal abstracts of Phase 1 Small Business Innovation Research (SBIR) projects supported by NASA are presented. Projects in the fields of aeronautical propulsion, aerodynamics, acoustics, aircraft systems, materials and structures, teleoperators and robots, computer sciences, information systems, data processing, spacecraft propulsion, bioastronautics, satellite communication, and space processing are covered.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-11
... practices and display execution and trading systems. While the examination is primarily dedicated to topics related to proprietary trading, the Series 56 examination also covers a few general concepts relating to... Trading Systems, 13 questions. Representatives from the applicable SROs intend to meet on a periodic basis...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-11
... investments, trading practices and display execution and trading systems. While the examination is primarily... concepts relating to customers.\\6\\ \\6\\ Proprietary trading firms do not have customers. The qualification... Trading Systems, 13 questions. Representatives from the applicable SROs intend to meet on a periodic basis...
The Piranha Solution: Monitoring and Protection of Proprietary System Intangible Assets
ERIC Educational Resources Information Center
Ladwig, Christine; Schwieger, Dana; Clayton, Donald
2017-01-01
The "Piranha Solution"® is a complex and valuable integrated chemical supply inventory management system protected as a trade secret by its asset holder, the Confluence Corporation. The "Piranha" program is the lifeblood of the corporation's growth and success in the chemical supply industry. A common definition of "trade…
A novel fully integrated handheld gamma camera
NASA Astrophysics Data System (ADS)
Massari, R.; Ucci, A.; Campisi, C.; Scopinaro, F.; Soluri, A.
2016-10-01
In this paper, we present an innovative, fully integrated handheld gamma camera, namely designed to gather in the same device the gamma ray detector with the display and the embedded computing system. The low power consumption allows the prototype to be battery operated. To be useful in radioguided surgery, an intraoperative gamma camera must be very easy to handle since it must be moved to find a suitable view. Consequently, we have developed the first prototype of a fully integrated, compact and lightweight gamma camera for radiopharmaceuticals fast imaging. The device can operate without cables across the sterile field, so it may be easily used in the operating theater for radioguided surgery. The prototype proposed consists of a Silicon Photomultiplier (SiPM) array coupled with a proprietary scintillation structure based on CsI(Tl) crystals. To read the SiPM output signals, we have developed a very low power readout electronics and a dedicated analog to digital conversion system. One of the most critical aspects we faced designing the prototype was the low power consumption, which is mandatory to develop a battery operated device. We have applied this detection device in the lymphoscintigraphy technique (sentinel lymph node mapping) comparing the results obtained with those of a commercial gamma camera (Philips SKYLight). The results obtained confirm a rapid response of the device and an adequate spatial resolution for the use in the scintigraphic imaging. This work confirms the feasibility of a small gamma camera with an integrated display. This device is designed for radioguided surgery and small organ imaging, but it could be easily combined into surgical navigation systems.
Milesi, Marie-Anne; Lacan, Dominique; Brosse, Hervé; Desor, Didier; Notin, Claire
2009-01-01
Background Recent studies have demonstrated a correlation between perceived stress and oxidative stress. As SOD is the main enzyme of the enzymatic antioxidant defence system of the body, we evaluated the effect of an oral daily intake of a proprietary melon juice concentrate rich in SOD (EXTRAMEL®) on the signs and symptoms of stress and fatigue in healthy volunteers. Methods This randomized, double blind, placebo controlled clinical study was conducted with seventy healthy volunteers aged between 30 and 55 years, who feel daily stress and fatigue. They took the dietary supplement based on the melon juice concentrate (10 mg Extramel® corresponding to 140 IU SOD per capsule) or a placebo one time daily during 4 weeks. Stress and fatigue were measured using four observational psychometric scales: FARD, PSS-14, SF-12 and Epworth scale. The study was conducted by Isoclin, a clinical research organization, located in Poitiers, France. Results No adverse effect was noted. The supplementation with the proprietary melon juice concentrate bringing 140 IU SOD/day significantly improved signs and symptoms of stress and fatigue linked to performance, physical (pain, sleep troubles), cognitive (concentration, weariness, sleep troubles) or behavioural (attitude, irritability, difficulty of contact) compared to the placebo. In the same way, quality of life and perceived stress were significantly improved with SOD supplementation. Conclusion This pilot study showed that an oral supplementation with a proprietary melon juice concentrate rich in SOD may have a positive effect on several signs and symptoms of perceived stress and fatigue. PMID:19754931
The Forensic Potential of Flash Memory
2009-09-01
limit range of 10 to 100 years before data is lost [12]. 5. Flash Memory Logical Structure The logical structure of flash memory from least to...area is not standardized and is manufacturer specific. This information will be used by the wear leveling algorithms and as such will be proprietary...memory cells, the manufacturers of the flash implement a wear leveling algorithm . In contrast, a magnetic disk in an overwrite operation will reuse the
Aerial Refueling Boom/Receptacle Guide
2017-07-28
Alleviation System; AR – Aerial Refueling; IDS – Independent Disconnect System; PDL – Pilot Director Lights; PSIG – Pounds per square inch gauge; TMF...proprietary, sensitive, classified or otherwise restricted information. ARSAG documents, as prepared, are not DOD, MOD or NATO standards, but provide...Boom Nozzle Disconnect Provisions, Aerial Refueling Fuel System and Tanker Aids and Cues for the Receiver Aircraft. Also included are Receiver
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-17
... to other venues on the SOLV System routing table, or (ii) check the NASDAQ book first and then route to destinations on the SOLV System routing table.\\3\\ Under the second option, the applicable routing.... \\3\\ As provided in Rule 4758(a)(1)(A), the term ``System routing table'' refers to the proprietary...
Small business innovation research. Abstracts of completed 1987 phase 1 projects
NASA Technical Reports Server (NTRS)
1989-01-01
Non-proprietary summaries of Phase 1 Small Business Innovation Research (SBIR) projects supported by NASA in the 1987 program year are given. Work in the areas of aeronautical propulsion, aerodynamics, acoustics, aircraft systems, materials and structures, teleoperators and robotics, computer sciences, information systems, spacecraft systems, spacecraft power supplies, spacecraft propulsion, bioastronautics, satellite communication, and space processing are covered.
Space-Based Reconfigurable Software Defined Radio Test Bed Aboard International Space Station
NASA Technical Reports Server (NTRS)
Reinhart, Richard C.; Lux, James P.
2014-01-01
The National Aeronautical and Space Administration (NASA) recently launched a new software defined radio research test bed to the International Space Station. The test bed, sponsored by the Space Communications and Navigation (SCaN) Office within NASA is referred to as the SCaN Testbed. The SCaN Testbed is a highly capable communications system, composed of three software defined radios, integrated into a flight system, and mounted to the truss of the International Space Station. Software defined radios offer the future promise of in-flight reconfigurability, autonomy, and eventually cognitive operation. The adoption of software defined radios offers space missions a new way to develop and operate space transceivers for communications and navigation. Reconfigurable or software defined radios with communications and navigation functions implemented in software or VHDL (Very High Speed Hardware Description Language) provide the capability to change the functionality of the radio during development or after launch. The ability to change the operating characteristics of a radio through software once deployed to space offers the flexibility to adapt to new science opportunities, recover from anomalies within the science payload or communication system, and potentially reduce development cost and risk by adapting generic space platforms to meet specific mission requirements. The software defined radios on the SCaN Testbed are each compliant to NASA's Space Telecommunications Radio System (STRS) Architecture. The STRS Architecture is an open, non-proprietary architecture that defines interfaces for the connections between radio components. It provides an operating environment to abstract the communication waveform application from the underlying platform specific hardware such as digital-to-analog converters, analog-to-digital converters, oscillators, RF attenuators, automatic gain control circuits, FPGAs, general-purpose processors, etc. and the interconnections among different radio components.
34 CFR 673.4 - Allocation and reallocation.
Code of Federal Regulations, 2010 CFR
2010-07-01
... one of the following six categories: (i) Cosmetology. (ii) Business. (iii) Trade/Technical. (iv) Art Schools. (v) Other Proprietary Institutions. (vi) Non-Proprietary Institutions. (2) Payments to...
Marketing and Sales for Proprietary Schools.
ERIC Educational Resources Information Center
Kleinman, Art
1986-01-01
The author provides several tips and suggestions for marketing a proprietary school, involving newspaper advertising, television advertising, direct mail, high school marketing, and timing of promotional mailings. (CT)
Building CHAOS: An Operating System for Livermore Linux Clusters
DOE Office of Scientific and Technical Information (OSTI.GOV)
Garlick, J E; Dunlap, C M
2003-02-21
The Livermore Computing (LC) Linux Integration and Development Project (the Linux Project) produces and supports the Clustered High Availability Operating System (CHAOS), a cluster operating environment based on Red Hat Linux. Each CHAOS release begins with a set of requirements and ends with a formally tested, packaged, and documented release suitable for use on LC's production Linux clusters. One characteristic of CHAOS is that component software packages come from different sources under varying degrees of project control. Some are developed by the Linux Project, some are developed by other LC projects, some are external open source projects, and some aremore » commercial software packages. A challenge to the Linux Project is to adhere to release schedules and testing disciplines in a diverse, highly decentralized development environment. Communication channels are maintained for externally developed packages in order to obtain support, influence development decisions, and coordinate/understand release schedules. The Linux Project embraces open source by releasing locally developed packages under open source license, by collaborating with open source projects where mutually beneficial, and by preferring open source over proprietary software. Project members generally use open source development tools. The Linux Project requires system administrators and developers to work together to resolve problems that arise in production. This tight coupling of production and development is a key strategy for making a product that directly addresses LC's production requirements. It is another challenge to balance support and development activities in such a way that one does not overwhelm the other.« less
The shifting functional balance of patents and drug regulation.
Eisenberg, R S
2001-01-01
Patents are often portrayed as the necessary reward to compensate pharmaceutical firms for the huge costs and risks associated with Food and Drug Administration (FDA)-mandated clinical trials of new drugs. But the relationship between the patent system and other regulation of drugs is more complex than this simple formulation suggests. Drug regulation operates in tandem with patents to make proprietary products profitable, and patents themselves increasingly threaten to limit profitability by diverting profits elsewhere. At the same time, resistance to high drug prices is prompting new state and federal regulatory initiatives that threaten to reduce the value of drug patents. The distinctive intertwining of patents with other regulatory regimes and the shifting role of patents in the biopharmaceutical sector call into question how this singular success story for innovation policy will play out in the future.
Evolution of the VLT instrument control system toward industry standards
NASA Astrophysics Data System (ADS)
Kiekebusch, Mario J.; Chiozzi, Gianluca; Knudstrup, Jens; Popovic, Dan; Zins, Gerard
2010-07-01
The VLT control system is a large distributed system consisting of Linux Workstations providing the high level coordination and interfaces to the users, and VME-based Local Control Units (LCU's) running the VxWorks real-time operating system with commercial and proprietary boards acting as the interface to the instrument functions. After more than 10 years of VLT operations, some of the applied technologies used by the astronomical instruments are being discontinued making it difficult to find adequate hardware for future projects. In order to deal with this obsolescence, the VLT Instrumentation Framework is being extended to adopt well established Commercial Off The Shelf (COTS) components connected through industry standard fieldbuses. This ensures a flexible state of the art hardware configuration for the next generation VLT instruments allowing the access to instrument devices via more compact and simpler control units like PC-based Programmable Logical Controllers (PLC's). It also makes it possible to control devices directly from the Instrument Workstation through a normal Ethernet connection. This paper outlines the requirements that motivated this work, as well as the architecture and the design of the framework extension. In addition, it describes the preliminary results on a use case which is a VLTI visitor instrument used as a pilot project to validate the concepts and the suitability of some COTS products like a PC-based PLCs, EtherCAT8 and OPC UA6 as solutions for instrument control.
Phase III gross solids removal devices pilot study, 2002-2005.
DOT National Transportation Integrated Search
2005-12-01
The objective of the Phase III Gross Solids Removal Devices (GSRDs) Pilot study was to : evaluate the performance of non-proprietary devices that can capture gross solids and that can be : incorporated into existing highway drainage systems or implem...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-26
... Bulletin Board or the system maintained by PINK OTC Markets, Inc., as well as over-the-counter derivatives... or money market instruments) during its initial pre-investment organizational period, while the fund...
48 CFR 209.505-4 - Obtaining access to proprietary information.
Code of Federal Regulations, 2014 CFR
2014-10-01
...) For contractors accessing third party proprietary technical data or computer software, non-disclosure... limited rights technical data, commercial technical data, or restricted rights computer software. The...
48 CFR 1509.505-4 - Obtaining access to proprietary information.
Code of Federal Regulations, 2010 CFR
2010-10-01
... PROTECTION AGENCY ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS Organizational Conflicts of Interests 1509.505-4 Obtaining access to proprietary information. Contractors gaining access to confidential business... business information. ...
A comparison of the capital structures of nonprofit and proprietary health care organizations.
Trussel, John
2012-01-01
The relative amount of debt used by an organization is an important determination of the organization's likelihood of financial problems and its cost of capital. This study addresses whether or not there are any differences between proprietary and nonprofit health care organizations in terms of capital structure. Controlling for profitability, risk, growth, and size, analysis of covariance is used to determine whether or not proprietary and nonprofit health care organizations use the same amount of leverage in their capital structures. The results indicate that there is no difference in the amount of leverage between the two institutional types. Although nonprofit and proprietary organizations have unique financing mechanisms, these differences do not impact the relative amount of debt and equity in their capital structures.
Gustafsson, Jonas; Kyusakov, Rumen; Mäkitaavola, Henrik; Delsing, Jerker
2014-08-21
Hardwired sensor installations using proprietary protocols found in today's district heating substations limit the potential usability of the sensors in and around the substations. If sensor resources can be shared and re-used in a variety of applications, the cost of sensors and installation can be reduced, and their functionality and operability can be increased. In this paper, we present a new concept of district heating substation control and monitoring, where a service oriented architecture (SOA) is deployed in a wireless sensor network (WSN), which is integrated with the substation. IP-networking is exclusively used from sensor to server; hence, no middleware is needed for Internet integration. Further, by enabling thousands of sensors with SOA capabilities, a System of Systems approach can be applied. The results of this paper show that it is possible to utilize SOA solutions with heavily resource-constrained embedded devices in contexts where the real-time constrains are limited, such as in a district heating substation.
Gustafsson, Jonas; Kyusakov, Rumen; Mäkitaavola, Henrik; Delsing, Jerker
2014-01-01
Hardwired sensor installations using proprietary protocols found in today's district heating substations limit the potential usability of the sensors in and around the substations. If sensor resources can be shared and re-used in a variety of applications, the cost of sensors and installation can be reduced, and their functionality and operability can be increased. In this paper, we present a new concept of district heating substation control and monitoring, where a service oriented architecture (SOA) is deployed in a wireless sensor network (WSN), which is integrated with the substation. IP-networking is exclusively used from sensor to server; hence, no middleware is needed for Internet integration. Further, by enabling thousands of sensors with SOA capabilities, a System of Systems approach can be applied. The results of this paper show that it is possible to utilize SOA solutions with heavily resource-constrained embedded devices in contexts where the real-time constrains are limited, such as in a district heating substation. PMID:25196165
NASA Astrophysics Data System (ADS)
Vucinic, Dean; Deen, Danny; Oanta, Emil; Batarilo, Zvonimir; Lacor, Chris
This paper focuses on visualization and manipulation of graphical content in distributed network environments. The developed graphical middleware and 3D desktop prototypes were specialized for situational awareness. This research was done in the LArge Scale COllaborative decision support Technology (LASCOT) project, which explored and combined software technologies to support human-centred decision support system for crisis management (earthquake, tsunami, flooding, airplane or oil-tanker incidents, chemical, radio-active or other pollutants spreading, etc.). The performed state-of-the-art review did not identify any publicly available large scale distributed application of this kind. Existing proprietary solutions rely on the conventional technologies and 2D representations. Our challenge was to apply the "latest" available technologies, such Java3D, X3D and SOAP, compatible with average computer graphics hardware. The selected technologies are integrated and we demonstrate: the flow of data, which originates from heterogeneous data sources; interoperability across different operating systems and 3D visual representations to enhance the end-users interactions.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-09
...) System Event Messages (e.g., start of messages, start of system hours, start of quoting, start of opening... assignments, to take advantage of the proposed $500 cap and thereby limit costs. \\11\\ Typically, a smaller... of the Exchange that is typically a small proprietary market maker doing business on the Exchange's...
Corrosion inhibitors for solar heating and cooling systems
NASA Technical Reports Server (NTRS)
Humphries, T. S.
1978-01-01
Inhibitors which appeared promising in previous tests and additional inhibitors including several proprietary products were evaluated. Evaluation of the inhibitors was based on corrosion protection afforded an aluminum-mild steel-copper-stainless steel assembly in a hot corrosive water. Of the inhibitors tested two were found to be effective and show promise for protecting multimetallic solar heating systems.
Application of Open-Source Enterprise Information System Modules: An Empirical Study
ERIC Educational Resources Information Center
Lee, Sang-Heui
2010-01-01
Although there have been a number of studies on large scale implementation of proprietary enterprise information systems (EIS), open-source software (OSS) for EIS has received limited attention in spite of its potential as a disruptive innovation. Cost saving is the main driver for adopting OSS among the other possible benefits including security…
User community development for the space transportation system/Skylab
NASA Technical Reports Server (NTRS)
Archer, J. L.; Beauchamp, N. A.
1974-01-01
The New User Function plan for identifying beneficial uses of space is described. Critical issues such as funding, manpower, and protection of user proprietary rights are discussed along with common barriers which impede the development of a user community. Studies for developing methodologies of identifying new users and uses of the space transportation system are included.
Chemical Transformation System: Cloud Based ...
Integrated Environmental Modeling (IEM) systems that account for the fate/transport of organics frequently require physicochemical properties as well as transformation products. A myriad of chemical property databases exist but these can be difficult to access and often do not contain the proprietary chemicals that environmental regulators must consider. We are building the Chemical Transformation System (CTS) to facilitate model parameterization and analysis. CTS integrates a number of physicochemical property calculators into the system including EPI Suite, SPARC, TEST and ChemAxon. The calculators are heterogeneous in their scientific methodologies, technology implementations and deployment stacks. CTS also includes a chemical transformation processing engine that has been loaded with reaction libraries for human biotransformation, abiotic reduction and abiotic hydrolysis. CTS implements a common interface for the disparate calculators accepting molecular identifiers (SMILES, IUPAC, CAS#, user-drawn molecule) before submission for processing. To make the system as accessible as possible and provide a consistent programmatic interface, we wrapped the calculators in a standardized RESTful Application Programming Interface (API) which makes it capable of servicing a much broader spectrum of clients without constraints to interoperability such as operating system or programming language. CTS is hosted in a shared cloud environment, the Quantitative Environmental
By any other name: ambiguity in marketing proprietary anti-infective agents.
Berger, Stephen A
2007-01-01
In 55 instances, a single proprietary (trade) name has been used to market > or = 2 distinct generic anti-infective agents. In some cases, one trade name represents 2 different drugs in the same country--or even marketed by the same manufacturer. Some unrelated drugs and poisonous substances are also manufactured under trade names assigned to anti-infectives. The use of proprietary names in the prescribing of anti-infective drugs could result in considerable confusion or harm to patients.
12 CFR 229.16 - Specific availability policy disclosure.
Code of Federal Regulations, 2010 CFR
2010-01-01
... can differentiate between a proprietary and a nonproprietary ATM, if the bank makes funds from deposits at nonproprietary ATMs available for withdrawal later than funds from deposits at proprietary ATMs...
Phase IV gross solids removal devices pilot study, 2004-2005.
DOT National Transportation Integrated Search
2005-12-01
The objective of the Phase IV Gross Solids Removal Device (GSRD) Pilot study was to evaluate : the performance of one non-proprietary device that can capture gross solids and that can be : incorporated into existing highway drainage systems or implem...
DEMONSTRATION BULLETIN: TERRA KLEEN SOLVENT EXTRACTION TECHNOLOGY - TERRA-KLEEN RESPONSE GROUP, INC.
The Terra-Kleen Solvent Extraction Technology was developed by Terra-Kleen Response Group, Inc., to remove polychlorinated biphenyls (PCB) and other organic constituents from contaminated soil. This batch process system uses a proprietary solvent at ambient temperatures to treat ...
30 CFR 1227.103 - What must a State's delegation proposal contain?
Code of Federal Regulations, 2013 CFR
2013-07-01
... processing, including compatibility with ONRR automated systems, electronic commerce capabilities, and data storage capabilities; (B) Accessing reference data; (C) Contacting production or royalty reporters; (D...) Maintaining security of confidential and proprietary information; and (H) Providing data to other Federal...
30 CFR 1227.103 - What must a State's delegation proposal contain?
Code of Federal Regulations, 2014 CFR
2014-07-01
... processing, including compatibility with ONRR automated systems, electronic commerce capabilities, and data storage capabilities; (B) Accessing reference data; (C) Contacting production or royalty reporters; (D...) Maintaining security of confidential and proprietary information; and (H) Providing data to other Federal...
30 CFR 1227.103 - What must a State's delegation proposal contain?
Code of Federal Regulations, 2012 CFR
2012-07-01
... processing, including compatibility with ONRR automated systems, electronic commerce capabilities, and data storage capabilities; (B) Accessing reference data; (C) Contacting production or royalty reporters; (D...) Maintaining security of confidential and proprietary information; and (H) Providing data to other Federal...
1992-06-18
original report have been deleted . Pmject Page ET Gun Pulse Power Module...Axial Lateral Peak: 100 100 Sustained:50 20 Note: This page contained proprietary information which has been deleted . 31 BTI PROJECT STATUS TRANSITION...operational environment. the Army to increase sensitivity by 50 LOCUSP Schedule PS 1 3M0 4MW los1 t 4C111 I= 2001 30112 40M lOSS m UIIS.ESONSS
2009-04-01
companies and Web site own- ers to use their tables and figures. This report was prepared under the general supervision of Janet Hardy, Chief...through reports about the technologies, sales and engineering literature, Web sites, and patents. Information in some circumstances was available from...the technologies are proprietary, some information sources were limited to Web sites and open literature. 5. TRL: Technology Readiness Level (TRL
Space market model development project, phase 2
NASA Technical Reports Server (NTRS)
Bishop, Peter C.
1988-01-01
The results of the prototype operations of the Space Business Information Center are presented. A clearinghouse for space business information for members of the U.S. space industry composed of public, private, and academic sectors was conducted. Behavioral and evaluation statistics were recorded from the clearinghouse and the conclusions from these statistics are presented. Business guidebooks on major markets in space business are discussed. Proprietary research and briefings for firms and agencies in the space industry are also discussed.
Automated customized retrieval of radiotherapy data for clinical trials, audit and research.
Romanchikova, Marina; Harrison, Karl; Burnet, Neil G; Hoole, Andrew Cf; Sutcliffe, Michael Pf; Parker, Michael Andrew; Jena, Rajesh; Thomas, Simon James
2018-02-01
To enable fast and customizable automated collection of radiotherapy (RT) data from tomotherapy storage. Human-readable data maps (TagMaps) were created to generate DICOM-RT (Digital Imaging and Communications in Medicine standard for Radiation Therapy) data from tomotherapy archives, and provided access to "hidden" information comprising delivery sinograms, positional corrections and adaptive-RT doses. 797 data sets totalling 25,000 scans were batch-exported in 31.5 h. All archived information was restored, including the data not available via commercial software. The exported data were DICOM-compliant and compatible with major commercial tools including RayStation, Pinnacle and ProSoma. The export ran without operator interventions. The TagMap method for DICOM-RT data modelling produced software that was many times faster than the vendor's solution, required minimal operator input and delivered high volumes of vendor-identical DICOM data. The approach is applicable to many clinical and research data processing scenarios and can be adapted to recover DICOM-RT data from other proprietary storage types such as Elekta, Pinnacle or ProSoma. Advances in knowledge: A novel method to translate data from proprietary storage to DICOM-RT is presented. It provides access to the data hidden in electronic archives, offers a working solution to the issues of data migration and vendor lock-in and paves the way for large-scale imaging and radiomics studies.
MYRIAD AFTER MYRIAD: THE PROPRIETARY DATA DILEMMA
Conley, John M.; Cook-Deegan, Robert; Lázaro-Muñoz, Gabriel
2014-01-01
Myriad Genetics’ long-time monopoly on BRCA gene testing was significantly narrowed by the Supreme Court’s decision in AMP v. Myriad Genetics, Inc., and will be further narrowed in the next few years as many of its still-valid patents expire. But these developments have not caused the company to acquiesce in competition. Instead, it has launched a litigation offensive against a number of actual and potential competitors, suing them for infringement of numerous unexpired patents that survived the Supreme Court case. A parallel strategy may have even greater long-term significance, however. In announcing expanded operations in Europe, Myriad has emphasized that it will rely less on patents and more on its huge proprietary database of genetic mutations and associated health outcomes—a strategy that could be used in the United States as well. Myriad has built that database over its many years as a patent-based monopolist in the BRCA testing field, and has not shared it with the medical community for more than a decade. Consequently, Myriad has a unique ability to interpret the health significance of patients’ genetic mutations, particularly in the case of rare “variants of unknown significance.” This article reviews the current state of Myriad’s patent portfolio, describes its ongoing litigation offensive, and then analyzes its proprietary database strategy. The article argues that Myriad’s strategy, while legally feasible, undercuts important values and objectives in medical research and health policy. The article identifies several ways in which the research and health care communities might fight back, but acknowledges that it will be a difficult uphill fight. PMID:25544836
MYRIAD AFTER MYRIAD: THE PROPRIETARY DATA DILEMMA.
Conley, John M; Cook-Deegan, Robert; Lázaro-Muñoz, Gabriel
2014-06-01
Myriad Genetics' long-time monopoly on BRCA gene testing was significantly narrowed by the Supreme Court's decision in AMP v. Myriad Genetics, Inc. , and will be further narrowed in the next few years as many of its still-valid patents expire. But these developments have not caused the company to acquiesce in competition. Instead, it has launched a litigation offensive against a number of actual and potential competitors, suing them for infringement of numerous unexpired patents that survived the Supreme Court case. A parallel strategy may have even greater long-term significance, however. In announcing expanded operations in Europe, Myriad has emphasized that it will rely less on patents and more on its huge proprietary database of genetic mutations and associated health outcomes-a strategy that could be used in the United States as well. Myriad has built that database over its many years as a patent-based monopolist in the BRCA testing field, and has not shared it with the medical community for more than a decade. Consequently, Myriad has a unique ability to interpret the health significance of patients' genetic mutations, particularly in the case of rare "variants of unknown significance." This article reviews the current state of Myriad's patent portfolio, describes its ongoing litigation offensive, and then analyzes its proprietary database strategy. The article argues that Myriad's strategy, while legally feasible, undercuts important values and objectives in medical research and health policy. The article identifies several ways in which the research and health care communities might fight back, but acknowledges that it will be a difficult uphill fight.
Forrow, Susan; Campion, Daniel M; Herrinton, Lisa J; Nair, Vinit P; Robb, Melissa A; Wilson, Marcus; Platt, Richard
2012-01-01
The US Food and Drug Administration's Mini-Sentinel pilot program is developing an organizational structure as well as principles and policies to govern its operations. These will inform the structure and function of the eventual Sentinel System. Mini-Sentinel is a collaboration that includes 25 participating institutions. We describe the program's current organizational structure and its major principles and policies. The organization includes a coordinating center with program leadership provided by a principal investigator; a planning board and subcommittees; an operations center; and data, methods, and protocol cores. Ad hoc workgroups are created as needed. A privacy panel advises about protection of individual health information. Principles and policies are intended to ensure that Mini-Sentinel conforms to the principles of fair information practices, protects the privacy of individual health information, maintains the security and integrity of data, assures the confidentiality of proprietary information, provides accurate and timely communications, prevents or manages conflicts of interest, and preserves respect for intellectual property rights. Copyright © 2012 John Wiley & Sons, Ltd.
19 CFR 207.3 - Service, filing, and certification of documents.
Code of Federal Regulations, 2010 CFR
2010-04-01
... proprietary version shall enclose all business proprietary information in brackets and have the following... has failed to bracket correctly, the submitter may file a corrected version or portion of the business...
Prediction of hospital failure: a post-PPS analysis.
Gardiner, L R; Oswald, S L; Jahera, J S
1996-01-01
This study investigates the ability of discriminant analysis to provide accurate predictions of hospital failure. Using data from the period following the introduction of the Prospective Payment System, we developed discriminant functions for each of two hospital ownership categories: not-for-profit and proprietary. The resulting discriminant models contain six and seven variables, respectively. For each ownership category, the variables represent four major aspects of financial health (liquidity, leverage, profitability, and efficiency) plus county marketshare and length of stay. The proportion of closed hospitals misclassified as open one year before closure does not exceed 0.05 for either ownership type. Our results show that discriminant functions based on a small set of financial and nonfinancial variables provide the capability to predict hospital failure reliably for both not-for-profit and proprietary hospitals.
NASA Astrophysics Data System (ADS)
Flores, Federico; Rondanelli, Roberto; Abarca, Accel; Diaz, Marcos; Querel, Richard
2012-09-01
Our group has designed, sourced and constructed a radiosonde/ground-station pair using inexpensive opensource hardware. Based on the Arduino platform, the easy to build radiosonde allows the atmospheric science community to test and deploy instrumentation packages that can be fully customized to their individual sensing requirements. This sensing/transmitter package has been successfully deployed on a tethered-balloon, a weather balloon, a UAV airplane, and is currently being integrated into a UAV quadcopter and a student-built rocket. In this paper, the system, field measurements and potential applications will be described. As will the science drivers of having full control and open access to a measurement system in an age when commercial solutions have become popular but are restrictive in terms of proprietary sensor specifications, "black-box" calibration operations or data handling routines, etc. The ability to modify and experiment with both the hardware and software tools is an essential part of the scientific process. Without an understanding of the intrinsic biases or limitations in your instruments and system, it becomes difficult to improve them or advance the knowledge in any given field.
Directory of Energy Information Administration model abstracts 1988
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1988-01-01
This directory contains descriptions about each basic and auxiliary model, including the title, acronym, purpose, and type, followed by more detailed information on characteristics, uses, and requirements. For developing models, limited information is provided. Sources for additional information are identified. Included in this directory are 44 EIA models active as of February 1, 1988; 16 of which operate on personal computers. Models that run on personal computers are identified by ''PC'' as part of the acronyms. The main body of this directory is an alphabetical listing of all basic and auxiliary EIA models. Appendix A identifies major EIA modeling systemsmore » and the models within these systems, and Appendix B identifies EIA models by type (basic or auxiliary). Appendix C lists developing models and contact persons for those models. A basic model is one designated by the EIA Administrator as being sufficiently important to require sustained support and public scrutiny. An auxiliary model is one designated by the EIA Administrator as being used only occasionally in analyses, and therefore requires minimal levels of documentation. A developing model is one designated by the EIA Administrator as being under development and yet of sufficient interest to require a basic level of documentation at a future date. EIA also leases models developed by proprietary software vendors. Documentation for these ''proprietary'' models is the responsibility of the companies from which they are leased. EIA has recently leased models from Chase Econometrics, Inc., Data Resources, Inc. (DRI), the Oak Ridge National Laboratory (ORNL), and Wharton Econometric Forecasting Associates (WEFA). Leased models are not abstracted here.« less
A Proprietary Information Dissemination and Education System.
ERIC Educational Resources Information Center
Rollins, Timothy J.; Golden, Kerry
1994-01-01
In focus group interviews, 14 Pennsylvania Crop Management Association technicians identified their primary role as information providers and consultants, felt the need for better communication skills and training as nonformal adult educators, considered human resources the most valuable information sources, and believed farmers participated only…
DEVELOPMENT AND APPLICATION OF THE DORIAN (DOSE-RESPONSE INFORMATION ANALYSIS) SYSTEM
Beyond Information Retrieval: Ways To Provide Content in Context.
ERIC Educational Resources Information Center
Wiley, Deborah Lynne
1998-01-01
Provides an overview of information retrieval from mainframe systems to Web search engines; discusses collaborative filtering, data extraction, data visualization, agent technology, pattern recognition, classification and clustering, and virtual communities. Argues that rather than huge data-storage centers and proprietary software, we need…
ERIC Educational Resources Information Center
Wodarz, Nan
1997-01-01
Explores how to avoid common pitfalls when schools purchase computer equipment. Purchasing tips are provided in the areas of choosing multiple platforms, buying the cheapest model available, choosing a proprietary design, falling for untested technology, purchasing systems that are not upgradable, ignoring extended warranties, and failing to plan…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dean Schneider; Michael Martin; Renee Berry
2012-07-31
This report describes the results of the final implementation and testing of a hybrid micro-grid system designed for off-grid applications in underserved Colonias along the Texas/Mexico border. The project is a federally funded follow-on to a project funded by the Texas State Energy Conservation Office in 2007 that developed and demonstrated initial prototype hybrid generation systems consisting of a proprietary energy storage technology, high efficiency charging and inverting systems, photovoltaic cells, a wind turbine, and bio-diesel generators. This combination of technologies provided continuous power to dwellings that are not grid connected, with a significant savings in fuel by allowing powermore » generation at highly efficient operating conditions. The objective of this project was to complete development of the prototype systems and to finalize and engineering design; to install and operate the systems in the intended environment, and to evaluate the technical and economic effectiveness of the systems. The objectives of this project were met. This report documents the final design that was achieved and includes the engineering design documents for the system. The system operated as designed, with the system availability limited by maintenance requirements of the diesel gensets. Overall, the system achieved a 96% availability over the operation of the three deployed systems. Capital costs of the systems were dependent upon both the size of the generation system and the scope of the distribution grid, but, in this instance, the systems averaged $0.72/kWh delivered. This cost would decrease significantly as utilization of the system increased. The system with the highest utilization achieved a capitol cost amortized value of $0.34/kWh produced. The average amortized fuel and maintenance cost was $0.48/kWh which was dependent upon the amount of maintenance required by the diesel generator. Economically, the system is difficult to justify as an alternative to grid power. However, the operational costs are reasonable if grid power is unavailable, e.g. in a remote area or in a disaster recovery situation. In fact, avoided fuel costs for the smaller of the systems in use during this project would have a payback of the capital costs of that system in 2.3 years, far short of the effective system life.« less
Comparing the Performance of Blue Gene/Q with Leading Cray XE6 and InfiniBand Systems
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kerbyson, Darren J.; Barker, Kevin J.; Vishnu, Abhinav
2013-01-21
Abstract—Three types of systems dominate the current High Performance Computing landscape: the Cray XE6, the IBM Blue Gene, and commodity clusters using InfiniBand. These systems have quite different characteristics making the choice for a particular deployment difficult. The XE6 uses Cray’s proprietary Gemini 3-D torus interconnect with two nodes at each network endpoint. The latest IBM Blue Gene/Q uses a single socket integrating processor and communication in a 5-D torus network. InfiniBand provides the flexibility of using nodes from many vendors connected in many possible topologies. The performance characteristics of each vary vastly along with their utilization model. In thismore » work we compare the performance of these three systems using a combination of micro-benchmarks and a set of production applications. In particular we discuss the causes of variability in performance across the systems and also quantify where performance is lost using a combination of measurements and models. Our results show that significant performance can be lost in normal production operation of the Cray XT6 and InfiniBand Clusters in comparison to Blue Gene/Q.« less
Leavesley, G.H.; Markstrom, S.L.; Restrepo, Pedro J.; Viger, R.J.
2002-01-01
A modular approach to model design and construction provides a flexible framework in which to focus the multidisciplinary research and operational efforts needed to facilitate the development, selection, and application of the most robust distributed modelling methods. A variety of modular approaches have been developed, but with little consideration for compatibility among systems and concepts. Several systems are proprietary, limiting any user interaction. The US Geological Survey modular modelling system (MMS) is a modular modelling framework that uses an open source software approach to enable all members of the scientific community to address collaboratively the many complex issues associated with the design, development, and application of distributed hydrological and environmental models. Implementation of a common modular concept is not a trivial task. However, it brings the resources of a larger community to bear on the problems of distributed modelling, provides a framework in which to compare alternative modelling approaches objectively, and provides a means of sharing the latest modelling advances. The concepts and components of the MMS are described and an example application of the MMS, in a decision-support system context, is presented to demonstrate current system capabilities. Copyright ?? 2002 John Wiley and Sons, Ltd.
ERIC Educational Resources Information Center
Scott, George A.
2009-01-01
For-profit schools--also known as proprietary schools--received over $16 billion in federal loans, grants, and campus-based aid under Title IV of the Higher Education Act in 2007/08. The US Government Accountability Office (GAO) was asked to determine (1) how the student loan default profile of proprietary schools compares with that of other types…
OPAL: An Open-Source MPI-IO Library over Cray XT
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yu, Weikuan; Vetter, Jeffrey S; Canon, Richard Shane
Parallel IO over Cray XT is supported by a vendor-supplied MPI-IO package. This package contains a proprietary ADIO implementation built on top of the sysio library. While it is reasonable to maintain a stable code base for application scientists' convenience, it is also very important to the system developers and researchers to analyze and assess the effectiveness of parallel IO software, and accordingly, tune and optimize the MPI-IO implementation. A proprietary parallel IO code base relinquishes such flexibilities. On the other hand, a generic UFS-based MPI-IO implementation is typically used on many Linux-based platforms. We have developed an open-source MPI-IOmore » package over Lustre, referred to as OPAL (OPportunistic and Adaptive MPI-IO Library over Lustre). OPAL provides a single source-code base for MPI-IO over Lustre on Cray XT and Linux platforms. Compared to Cray implementation, OPAL provides a number of good features, including arbitrary specification of striping patterns and Lustre-stripe aligned file domain partitioning. This paper presents the performance comparisons between OPAL and Cray's proprietary implementation. Our evaluation demonstrates that OPAL achieves the performance comparable to the Cray implementation. We also exemplify the benefits of an open source package in revealing the underpinning of the parallel IO performance.« less
19 CFR 356.10 - Procedures for obtaining access to proprietary information.
Code of Federal Regulations, 2011 CFR
2011-04-01
... secretary if such person: (i) Is not involved in competitive decision-making for a participant in the panel review or for any person that would gain competitive advantage through knowledge of the proprietary...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-12-21
... education benefits to veterans and other eligible person pursuing approved programs of education. Employees... to ensure State approving agency and VA employees do not own any interest in a proprietary profit...
DEMONSTRATION BULLETIN - SOLIDIFICATION/ STABILIZATION PROCESS, SOLIDTECH, INC.
The Soliditech solidification/stabilization technology mixes hazardous waste materials in soils or sludges with pozzolanic material (cement, fly ash, or kiln dust), a proprietary additive called Urrichem, other proprietary additives, and water. The process is designed to aid ...
Change Strategies Used by a Proprietary School: The Dale Carnegie Organization.
ERIC Educational Resources Information Center
Mackey, Paul J.
1983-01-01
Discusses recent developments regarding proprietary schools: recognition by accrediting associations, increased federal aid, and increased need for the specific training offered by these schools. Uses the Dale Carnegie organization as an example. (JOW)
NASA Astrophysics Data System (ADS)
Trochimczuk, R.; Kuźmierowski, T.
2014-11-01
Existing commercial solutions of the CPM (Continuous Passive Motion) machines are described in the paper. Based on the analysis of existing solutions we present our conceptual solution to support the process of rehabilitation of the knee joint which is necessary after arthroscopic surgery. For a given novel structure we analyze and present proprietary algorithms and the computer application to simulate the operation of our PCM device. In addition, we suggest directions for further research.
ASTROCULTURE(tm) Commercial Plant Growth Unit and Glove Box Insert
NASA Technical Reports Server (NTRS)
Zhou, Wei-Jia; Lambing, Steve (Technical Monitor)
2002-01-01
Two commercial plant investigations will be conducted during the STS-107 mission: living flower essential oil production and gene transfer. The research will be done using the ASTROCULTURE (trademark) hardware, which builds on similar experiments flown in the past on the space shuttle. This research will investigate how microgravity might affect the formation of the volatile chemical compounds - the essential oils - produced by two different types of living flowers. The flowers will be cultured in the ASTROCULTURE (trademark) plant chamber, which provides an enclosed and controlled environment. As the flowers bloom in space, they will produce essential oils, and these volatile compounds will be collected using International Flavors and Fragrance's proprietary Solid Phase Micro Extraction (SPME) technology. The gene transfer experiment examines a newly developed transformation system to see if it operates efficiently in the microgravity environment. This research is important for the development of genetically engineered crops, also known as transgenic crops.
Adoption of site-specific variable rate sprinkler irrigation systems
USDA-ARS?s Scientific Manuscript database
More than twenty years of private and public research on site-specific variable-rate sprinkler irrigation (SS-VRI) technology has resulted in limited commercial adoption of the technology. Competing patents, liability and proprietary software have affected industry’s willingness to move into a new t...
ERIC Educational Resources Information Center
Downes, Stephen
2007-01-01
When Blackboard unveiled its U.S. patent for 44 features of learning management systems and then filed a patent infringement suit against Design2Learn, the response of the educational technology community was negative and swift. Stephen Downes discusses why many educators oppose Blackboard's proprietary claims to technologies long considered in…
Evaluating Digital Authoring Tools
ERIC Educational Resources Information Center
Wilde, Russ
2004-01-01
As the quality of authoring software increases, online course developers become less reliant on proprietary learning management systems, and develop skills in the design of original, in-house materials and the delivery platforms for them. This report examines the capabilities of digital authoring software tools for the development of learning…
A high-rate PCI-based telemetry processor system
NASA Astrophysics Data System (ADS)
Turri, R.
2002-07-01
The high performances reached by the Satellite on-board telemetry generation and transmission, as consequently, will impose the design of ground facilities with higher processing capabilities at low cost to allow a good diffusion of these ground station. The equipment normally used are based on complex, proprietary bus and computing architectures that prevent the systems from exploiting the continuous and rapid increasing in computing power available on market. The PCI bus systems now allow processing of high-rate data streams in a standard PC-system. At the same time the Windows NT operating system supports multitasking and symmetric multiprocessing, giving the capability to process high data rate signals. In addition, high-speed networking, 64 bit PCI-bus technologies and the increase in processor power and software, allow creating a system based on COTS products (which in future may be easily and inexpensively upgraded). In the frame of EUCLID RTP 9.8 project, a specific work element was dedicated to develop the architecture of a system able to acquire telemetry data of up to 600 Mbps. Laben S.p.A - a Finmeccanica Company -, entrusted of this work, has designed a PCI-based telemetry system making possible the communication between a satellite down-link and a wide area network at the required rate.
34 CFR 668.8 - Eligible program.
Code of Federal Regulations, 2010 CFR
2010-07-01
... counseling. (c) Institution of higher education. An eligible program provided by an institution of higher...) Proprietary institution of higher education and postsecondary vocational institution. An eligible program provided by a proprietary institution of higher education or postsecondary vocational institution— (1)(i...
10 CFR 51.16 - Proprietary information.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 10 Energy 2 2010-01-01 2010-01-01 false Proprietary information. 51.16 Section 51.16 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) ENVIRONMENTAL PROTECTION REGULATIONS FOR DOMESTIC LICENSING AND RELATED REGULATORY FUNCTIONS National Environmental Policy Act-Regulations Implementing Section 102(2...
10 CFR 51.16 - Proprietary information.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 10 Energy 2 2013-01-01 2013-01-01 false Proprietary information. 51.16 Section 51.16 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) ENVIRONMENTAL PROTECTION REGULATIONS FOR DOMESTIC LICENSING AND RELATED REGULATORY FUNCTIONS National Environmental Policy Act-Regulations Implementing Section 102(2...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-09
... Interests Certification for Proprietary Schools Only, VA Form 22-1919. OMB Control Number: 2900-0657. Type... certifying that the institution and enrollees do not have any conflict of interest. An agency may not conduct...
The SISMA Project: A pre-operative seismic hazard monitoring system.
NASA Astrophysics Data System (ADS)
Massimiliano Chersich, M. C.; Amodio, A. A. Angelo; Francia, A. F. Andrea; Sparpaglione, C. S. Claudio
2009-04-01
Galileian Plus is currently leading the development, in collaboration with several Italian Universities, of the SISMA (Seismic Information System for Monitoring and Alert) Pilot Project financed by the Italian Space Agency. The system is devoted to the continuous monitoring of the seismic risk and is addressed to support the Italian Civil Protection decisional process. Completion of the Pilot Project is planned at the beginning of 2010. Main scientific paradigm of SISMA is an innovative deterministic approach integrating geophysical models, geodesy and active tectonics. This paper will give a general overview of project along with its progress status and a particular focus will be put on the architectural design details and to the software implementation choices. SISMA is built on top of a software infrastructure developed by Galileian Plus to integrate the scientific programs devoted to the update of seismic risk maps. The main characteristics of the system may be resumed as follow: automatic download of input data; integration of scientific programs; definition and scheduling of chains of processes; monitoring and control of the system through a graphical user interface (GUI); compatibility of the products with ESRI ArcGIS, by mean of post-processing conversion. a) automatic download of input data SISMA needs input data such as GNSS observations, updated seismic catalogue, SAR satellites orbits, etc. that are periodically updated and made available from remote servers through FTP and HTTP. This task is accomplished by a dedicated user configurable component. b) integration of scientific programs SISMA integrates many scientific programs written in different languages (Fortran, C, C++, Perl and Bash) and running into different operating systems. This design requirements lead to the development of a distributed system which is platform independent and is able to run any terminal-based program following few simple predefined rules. c) definition and scheduling of chains of processes Processes are bound each other, in the sense that the output of process "A" should be passed as input to process "B". In this case the process "B" must run automatically as soon as the required input is ready. In SISMA this issue is handled with the "data-driven" activation concept allowing specifying that a process should be started as soon as the needed input datum has been made available in the archive. Moreover SISMA may run processes on a "time-driven" base. The infrastructure of SISMA provides a configurable scheduler allowing the user to define the start time and the periodicity of such processes. d) monitoring and control The operator of the system needs to monitor and control every process running in the system. The SISMA infrastructure allows, through its GUI, the user to: view log messages of running and old processes; stop running processes; monitor processes executions; monitor resource status (available ram, network reachability, and available disk space) for every machine in the system. e) compatibility with ESRI Shapefiles Nearly all the SISMA data has some geographic information, and it is useful to integrate it in a Geographic Information System (GIS). Processors output are georeferred, but they are generated as ASCII files in a proprietary format, and thus cannot directly loaded in a GIS. The infrastructures provides a simple framework for adding filters that reads the data in the proprietary format and converts it to ESRI Shapefile format.
Further developments of 8μm pitch MCT pixels at Finmeccanica (formerly Selex ES)
NASA Astrophysics Data System (ADS)
Jeckells, David; McEwen, R. Kennedy; Bains, Sudesh; Herbert, Martin
2016-05-01
Finmeccanica (formerly Selex ES) introduced high performance mercury cadmium telluride (MCT) infrared detectors on an 8μm pitch in 2015 with their SuperHawk device which builds on standard production processes already used for the manufacture of 24μm, 20μm, 16μm and 12μm pitch devices. The flexibility of the proprietary Finmeccanica designed diode structure, used in conjunction with the mature production Metal Organic Vapour Phase Epitaxy (MOVPE) MCT growth process at Finmeccanica, enables fine control of diode electrical and optical structure including free choice of cut-off wavelength. The mesa pixel design inherently provides major system performance benefits by reducing blurring mechanisms, including optical scattering, inter-pixel cross-talk and carrier diffusion, to negligible levels. The SuperHawk detector has demonstrated unrivalled MTF and NETD performance, even when operating at temperatures in excess of 120K. The SuperHawk Integrated Detector Cooler Assembly (IDCA) benefits from recent dewar developments at Finmeccanica, which have improved thermal efficiencies while maintaining mechanical integrity over a wide range of applications, enabling use of smaller cryo-coolers to reduce system SWAP-C. Performance and qualification results are presented together with example imagery. SuperHawk provides an easy high resolution upgrade for systems currently based on standard definition 16μm and 15μm infrared detector formats. The paper also addresses further work to increase the operating temperature of the established 8μm process, exploiting High Operating Temperature (HOT) MCT at Finmeccanica, as well as options for LWIR variants of the SuperHawk device.
Increased Reliability of Gas Turbine Components by Robust Coatings Manufacturing
NASA Astrophysics Data System (ADS)
Sharma, A.; Dudykevych, T.; Sansom, D.; Subramanian, R.
2017-08-01
The expanding operational windows of the advanced gas turbine components demand increasing performance capability from protective coating systems. This demand has led to the development of novel multi-functional, multi-materials coating system architectures over the last years. In addition, the increasing dependency of components exposed to extreme environment on protective coatings results in more severe penalties, in case of a coating system failure. This emphasizes that reliability and consistency of protective coating systems are equally important to their superior performance. By means of examples, this paper describes the effects of scatter in the material properties resulting from manufacturing variations on coating life predictions. A strong foundation in process-property-performance correlations as well as regular monitoring and control of the coating process is essential for robust and well-controlled coating process. Proprietary and/or commercially available diagnostic tools can help in achieving these goals, but their usage in industrial setting is still limited. Various key contributors to process variability are briefly discussed along with the limitations of existing process and product control methods. Other aspects that are important for product reliability and consistency in serial manufacturing as well as advanced testing methodologies to simplify and enhance product inspection and improve objectivity are briefly described.
NASA Technical Reports Server (NTRS)
Hebert, Phillip W., Sr.; Davis, Dawn M.; Turowski, Mark P.; Holladay, Wendy T.; Hughes, Mark S.
2012-01-01
The advent of the commercial space launch industry and NASA's more recent resumption of operation of Stennis Space Center's large test facilities after thirty years of contractor control resulted in a need for a non-proprietary data acquisition systems (DAS) software to support government and commercial testing. The software is designed for modularity and adaptability to minimize the software development effort for current and future data systems. An additional benefit of the software's architecture is its ability to easily migrate to other testing facilities thus providing future commonality across Stennis. Adapting the software to other Rocket Propulsion Test (RPT) Centers such as MSFC, White Sands, and Plumbrook Station would provide additional commonality and help reduce testing costs for NASA. Ultimately, the software provides the government with unlimited rights and guarantees privacy of data to commercial entities. The project engaged all RPT Centers and NASA's Independent Verification & Validation facility to enhance product quality. The design consists of a translation layer which provides the transparency of the software application layers to underlying hardware regardless of test facility location and a flexible and easily accessible database. This presentation addresses system technical design, issues encountered, and the status of Stennis development and deployment.
Kirkwood, Melissa L; Guild, Jeffrey B; Arbique, Gary M; Tsai, Shirling; Modrall, J Gregory; Anderson, Jon A; Rectenwald, John; Timaran, Carlos
2016-11-01
A new proprietary image-processing system known as AlluraClarity, developed by Philips Healthcare (Best, The Netherlands) for radiation-based interventional procedures, claims to lower radiation dose while preserving image quality using noise-reduction algorithms. This study determined whether the surgeon and patient radiation dose during complex endovascular procedures (CEPs) is decreased after the implementation of this new operating system. Radiation dose to operators, procedure type, reference air kerma, kerma area product, and patient body mass index were recorded during CEPs on two Philips Allura FD 20 fluoroscopy systems with and without Clarity. Operator dose during CEPs was measured using optically stimulable, luminescent nanoDot (Landauer Inc, Glenwood, Ill) detectors placed outside the lead apron at the left upper chest position. nanoDots were read using a microStar ii (Landauer Inc) medical dosimetry system. For the CEPs in the Clarity group, the radiation dose to surgeons was also measured by the DoseAware (Philips Healthcare) personal dosimetry system. Side-by-side measurements of DoseAware and nanoDots allowed for cross-calibration between systems. Operator effective dose was determined using a modified Niklason algorithm. To control for patient size and case complexity, the average fluoroscopy dose rate and the dose per radiographic frame were adjusted for body mass index differences and then compared between the groups with and without Clarity by procedure. Additional factors, for example, physician practice patterns, that may have affected operator dose were inferred by comparing the ratio of the operator dose to procedural kerma area product with and without Clarity. A one-sided Wilcoxon rank sum test was used to compare groups for radiation doses, reference air kermas, and operating practices for each procedure type. The analysis included 234 CEPs; 95 performed without Clarity and 139 with Clarity. Practice patterns of operators during procedures with and without Clarity were not significantly different. For all cases, procedure radiation dose to the patient and the primary and assistant operators were significantly decreased in the Clarity group by 60% compared with the non-Clarity group. By procedure type, fluorography dose rates decreased from 44% for fenestrated endovascular repair and up to 70% with lower extremity interventions. Fluoroscopy dose rates also significantly decreased, from about 37% to 47%, depending on procedure type. The AlluraClarity system reduces the patient and primary operator's radiation dose by more than half during CEPs. This feature appears to be an effective tool in lowering the radiation dose while maintaining image quality. Copyright © 2016 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.
Dynamic testing of a non-proprietary, high-tension, cable end terminal system.
DOT National Transportation Integrated Search
2014-03-01
Two bogie tests were conducted on a high-tension cable end terminal to evaluate the performance of a new design. The : main goals of the new design were to promote quick cable release times, to retain the cable release lever during impact, to : susta...
77 FR 28391 - Announcement of Requirements and Registration for “Ocular Imaging Challenge”
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-14
..., color, zoom, pan) Integrate with existing EHRs (e.g. ``single sign-on'') Where applicable, leverage and... existing office hardware platforms, and to integrate with existing EHR systems (e.g. ``single sign-on... on the acquisition devices in proprietary databases and file formats, and therefore have limited...
NREL Evaluates Advanced Solar Inverter Performance for Hawaiian Electric
Companies | Energy Systems Integration Facility | NREL NREL Evaluates Advanced Solar Inverter Performance for Hawaiian Electric Companies NREL Evaluates Advanced Solar Inverter Performance for Hawaiian performance and impacts of today's advanced solar inverters, as well as proprietary feedback to the inverter
Gasification of hybrid feedstock using animal manures and hays
USDA-ARS?s Scientific Manuscript database
The objective of this study is to evaluate the efficiency of a proprietary integrated gasification-internal combustion system in producing electricity from mixtures of animal manures such as swine solids, chicken litter, and hays. Five to 10 gallons of mixtures of swine manure, chicken litter, and h...
Institutional Vision at Proprietary Schools: Advising for Profit
ERIC Educational Resources Information Center
Abelman, Robert; Dalessandro, Amy; Janstova, Patricie; Snyder-Suhy, Sharon
2007-01-01
A college or university's general approach to students and student support services, as reflected in its institutional vision, can serve to advocate the adoption of one type of advising structure, approach, and delivery system over another. A content analysis of a nationwide sample of institutional vision statements from NACADA-membership colleges…
48 CFR 1552.235-70 - Screening business information for claims of confidentiality.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Screening business... Texts of Provisions and Clauses 1552.235-70 Screening business information for claims of confidentiality... proprietary or confidential by the business that has the right to the information. The following clause...
2015-11-01
examples of paired physiology and ultrasound models are given by Rune Aaslid and David H Evans. Aaslid offers [19] a sophisticated but proprietary... Rune Aaslid commercial software avalible from http://www.transcranial.com/ [20] Sunghan Kim, Mateo Aboy, James McNames, Pulse pressure variation
78 FR 46932 - Notice of Intent to Grant Exclusive Patent License; Safe Environment Engineering
Federal Register 2010, 2011, 2012, 2013, 2014
2013-08-02
...; Safe Environment Engineering AGENCY: Department of the Navy, DoD. ACTION: Notice. SUMMARY: The Department of the Navy hereby gives notice of its intent to grant to Safe Environment Engineering a revocable, nonassignable, exclusive license to practice Safe Environment Engineering's proprietary sensor systems for the...
Marketing a Proprietary Child Care System.
ERIC Educational Resources Information Center
Owens, Buffy L.
1984-01-01
Argues that next to quality of care, location is the most important factor in the success of a child care center. Emphasizes site evaluation; the grand opening; creating awareness in the community through paid advertising; telephone techniques; school tours; a free week of enrollment; and maintaining good parent relations. (RDN)
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-06
... Stability Oversight Council (``FSOC'') to study and make recommendations on implementing the Volcker Rule... Insurance Corporation (``FDIC''), the Board of Governors of the Federal Reserve System (``Board''), the... consider the recommendations of the FSOC study in developing and adopting regulations to implement the...
Proprietary Schools and Student Financial Aid.
ERIC Educational Resources Information Center
Wilms, Wellford W.
1983-01-01
Literature concerning U.S. proprietary vocational schools and student financial aid is reviewed, focusing on public and interprofessional attitudes, industry reforms, the schools as businesses, enrollments, student characteristics, program characteristics and costs, completions, job placement, earnings, federal student aid, aid recipients, and…
7 CFR 983.27 - Proprietary capacity.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 7 Agriculture 8 2010-01-01 2010-01-01 false Proprietary capacity. 983.27 Section 983.27 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE PISTACHIOS GROWN IN CALIFORNIA...
15 CFR 1160.6 - Proprietary data.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 15 Commerce and Foreign Trade 3 2011-01-01 2011-01-01 false Proprietary data. 1160.6 Section 1160.6 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) TECHNOLOGY ADMINISTRATION, DEPARTMENT OF COMMERCE PRODUCTIVITY, TECHNOLOGY AND INNOVATION Promotion of...
15 CFR 1160.6 - Proprietary data.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Proprietary data. 1160.6 Section 1160.6 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) TECHNOLOGY ADMINISTRATION, DEPARTMENT OF COMMERCE PRODUCTIVITY, TECHNOLOGY AND INNOVATION Promotion of...
15 CFR 1160.26 - Proprietary data.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 15 Commerce and Foreign Trade 3 2011-01-01 2011-01-01 false Proprietary data. 1160.26 Section 1160.26 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) TECHNOLOGY ADMINISTRATION, DEPARTMENT OF COMMERCE PRODUCTIVITY, TECHNOLOGY AND INNOVATION Strategic...
15 CFR 1160.26 - Proprietary data.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 15 Commerce and Foreign Trade 3 2013-01-01 2013-01-01 false Proprietary data. 1160.26 Section 1160.26 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) TECHNOLOGY ADMINISTRATION, DEPARTMENT OF COMMERCE PRODUCTIVITY, TECHNOLOGY AND INNOVATION Strategic...
15 CFR 1160.6 - Proprietary data.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 15 Commerce and Foreign Trade 3 2012-01-01 2012-01-01 false Proprietary data. 1160.6 Section 1160.6 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) TECHNOLOGY ADMINISTRATION, DEPARTMENT OF COMMERCE PRODUCTIVITY, TECHNOLOGY AND INNOVATION Promotion of...
15 CFR 1160.26 - Proprietary data.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Proprietary data. 1160.26 Section 1160.26 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) TECHNOLOGY ADMINISTRATION, DEPARTMENT OF COMMERCE PRODUCTIVITY, TECHNOLOGY AND INNOVATION Strategic...
15 CFR 1160.26 - Proprietary data.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 15 Commerce and Foreign Trade 3 2012-01-01 2012-01-01 false Proprietary data. 1160.26 Section 1160.26 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) TECHNOLOGY ADMINISTRATION, DEPARTMENT OF COMMERCE PRODUCTIVITY, TECHNOLOGY AND INNOVATION Strategic...
14 CFR 1203.405 - Proprietary information.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Proprietary information. 1203.405 Section 1203.405 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION INFORMATION SECURITY... sent, under proper safeguards, to the Director, Information Security Oversight Office, General Services...
A fatal case of potential chronic overdoses of prescribed and proprietary remedies.
Takase, Izumi; Yamamoto, Yoshio; Nakagawa, Tokiko; Nishi, Katsuji
2010-08-01
A 33-year-old man was found in a state of cardiopulmonary arrest. He was transported to an emergency hospital but was pronounced dead. He had suffered from depression for about 8 years and had attempted suicide repeatedly. A search by the police found 645 empty Press Through Package (PTP) sheets. They had included neuroleptics, antidepressants, hypnotics, proprietary antitussives containing caffeine, proprietary cold remedies containing caffeine, and other unidentified drugs. An autopsy showed higher rectal temperature (38 degrees C), severe pulmonary edema (left: 681 g, right: 821 g), and a large amount of urine in the bladder (about 760 mL). Toxicological analyses using gas chromatography-mass spectrometry (GC/MS) and high performance liquid chromatography (HPLC) demonstrated that doses of clomipramine hydrochloride (a tricyclic antidepressant), chlorpromazine (a phenothiazine), and caffeine (a methylxanthine derivative) were within the toxic range (0.68, 0.64, and 34.24 [microg/mL], respectively). Histological examination showed centrilobular necrosis of the liver with small fat droplets. We concluded that he had died of pulmonary edema due to combined drug intoxication including proprietary antitussives and cold remedies. Furthermore, there was a strong possibility that he had habitually taken overdoses of those drugs. Herein, the risk of misuse of prescribed and proprietary drugs, especially for people with psychological problems, should be reemphasized.
Shuttle-Derived Launch Vehicles' Capablities: An Overview
NASA Technical Reports Server (NTRS)
Rothschild, William J.; Bailey, Debra A.; Henderson, Edward M.; Crumbly, Chris
2005-01-01
Shuttle-Derived Launch Vehicle (SDLV) concepts have been developed by a collaborative team comprising the Johnson Space Center, Marshall Space Flight Center, Kennedy Space Center, ATK-Thiokol, Lockheed Martin Space Systems Company, The Boeing Company, and United Space Alliance. The purpose of this study was to provide timely information on a full spectrum of low-risk, cost-effective options for STS-Derived Launch Vehicle concepts to support the definition of crew and cargo launch requirements for the Space Exploration Vision. Since the SDLV options use high-reliability hardware, existing facilities, and proven processes, they can provide relatively low-risk capabilities to launch extremely large payloads to low Earth orbit. This capability to reliably lift very large, high-dollar-value payloads could reduce mission operational risks by minimizing the number of complex on-orbit operations compared to architectures based on multiple smaller launchers. The SDLV options also offer several logical spiral development paths for larger exploration payloads. All of these development paths make practical and cost-effective use of existing Space Shuttle Program (SSP) hardware, infrastructure, and launch and flight operations systems. By utilizing these existing assets, the SDLV project could support the safe and orderly transition of the current SSP through the planned end of life in 2010. The SDLV concept definition work during 2004 focused on three main configuration alternatives: a side-mount heavy lifter (approximately 77 MT payload), an in-line medium lifter (approximately 22 MT Crew Exploration Vehicle payload), and an in-line heavy lifter (greater than 100 MT payload). This paper provides an overview of the configuration, performance capabilities, reliability estimates, concept of operations, and development plans for each of the various SDLV alternatives. While development, production, and operations costs have been estimated for each of the SDLV configuration alternatives, these proprietary data have not been included in this paper.
Bullet Trap Feasibility Assessment and Implementation Plan. (Technology Identification).
1996-03-01
reduce costs, perhaps one of their premier assets is income generation . Projectiles fired into and recovered from TEC System products can be resold...ombat shooting scenarios with up to 15 individual targets as far away as 300 yards. Page 7 \\IEUMATIC TARGET SYSTEMS gt reliable . portable and... SYYSTEM ] 3DULAR BALLISTIC PANELS (MBPs) A~rking with recycled rubber tire products, DUE- RON has created the proprietary MBP System ,or use in the
DEVS Unified Process for Web-Centric Development and Testing of System of Systems
2008-05-20
gathering from the user. Further, methodologies have been developed to generate DEVS models from BPMN /BPEL-based and message-based requirement specifications...27] 3. BPMN /BPEL based system specifications: Business Process Modeling Notation ( BPMN ) [bpm] or Business Process Execution Language (BPEL) provide a...information is stored in .wsdl and .bpel files for BPEL but in proprietary format for BPMN . 4. DoDAF-based requirement specifications: Department of
Paul, Parneet; Jones, Franck Anderson
2016-01-01
Advanced wastewater treatment using membranes are popular environmental system processes since they allow reuse and recycling. However, fouling is a key limiting factor and so proprietary systems such as Avanti’s RPU-185 Flexidisks membrane bioreactor (MBR) use novel rotating membranes to assist in ameliorating it. In earlier research, this rotating process was studied by creating a simulation model based on first principles and traditional fouling mechanisms. In order to directly compare the potential benefits of this rotational system, this follow-up study was carried out using Avanti’s newly developed static (non-rotating) Flexidisks MBR system. The results from operating the static pilot unit were simulated and modelled using the rotational fouling model developed earlier however with rotational switching functions turned off and rotational parameters set to a static mode. The study concluded that a rotating MBR system could increase flux throughput when compared against a similar static system. It is thought that although the slowly rotating spindle induces a weak crossflow shear, it is still able to even out cake build up across the membrane surface, thus reducing the likelihood of localised critical flux being exceeded at the micro level and lessening the potential of rapid trans-membrane pressure increases at the macro level. PMID:26742053
A distributed component framework for science data product interoperability
NASA Technical Reports Server (NTRS)
Crichton, D.; Hughes, S.; Kelly, S.; Hardman, S.
2000-01-01
Correlation of science results from multi-disciplinary communities is a difficult task. Traditionally data from science missions is archived in proprietary data systems that are not interoperable. The Object Oriented Data Technology (OODT) task at the Jet Propulsion Laboratory is working on building a distributed product server as part of a distributed component framework to allow heterogeneous data systems to communicate and share scientific results.
Demonstration of an Enhanced Vertical Magnetic Gradient System for UXO
2008-04-01
flights were conducted and results evaluated. The cesium magnetometers , GPS systems (positioning and attitude), fluxgate magnetometers , data...makes a measurement and when it is time-stamped and recorded. This applies to the magnetometers , fluxgate and the GPS. Accurate positioning...requires a correction for this lag. Time lags between the magnetometers , fluxgate and GPS signals were measured by a proprietary utility. This utility
Using Game Theory Techniques and Concepts to Develop Proprietary Models for Use in Intelligent Games
ERIC Educational Resources Information Center
Christopher, Timothy Van
2011-01-01
This work is about analyzing games as models of systems. The goal is to understand the techniques that have been used by game designers in the past, and to compare them to the study of mathematical game theory. Through the study of a system or concept a model often emerges that can effectively educate students about making intelligent decisions…
Katz, Jonathan E
2017-01-01
Laboratories tend to be amenable environments for long-term reliable operation of scientific measurement equipment. Indeed, it is not uncommon to find equipment 5, 10, or even 20+ years old still being routinely used in labs. Unfortunately, the Achilles heel for many of these devices is the control/data acquisition computer. Often these computers run older operating systems (e.g., Windows XP) and, while they might only use standard network, USB or serial ports, they require proprietary software to be installed. Even if the original installation disks can be found, it is a burdensome process to reinstall and is fraught with "gotchas" that can derail the process-lost license keys, incompatible hardware, forgotten configuration settings, etc. If you have running legacy instrumentation, the computer is the ticking time bomb waiting to put a halt to your operation.In this chapter, I describe how to virtualize your currently running control computer. This virtualized computer "image" is easy to maintain, easy to back up and easy to redeploy. I have used this multiple times in my own lab to greatly improve the robustness of my legacy devices.After completing the steps in this chapter, you will have your original control computer as well as a virtual instance of that computer with all the software installed ready to control your hardware should your original computer ever be decommissioned.
High Efficiency Heat Exchanger for High Temperature and High Pressure Applications
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sienicki, James J.; Lv, Qiuping; Moisseytsev, Anton
CompRex, LLC (CompRex) specializes in the design and manufacture of compact heat exchangers and heat exchange reactors for high temperature and high pressure applications. CompRex’s proprietary compact technology not only increases heat exchange efficiency by at least 25 % but also reduces footprint by at least a factor of ten compared to traditional shell-and-tube solutions of the same capacity and by 15 to 20 % compared to other currently available Printed Circuit Heat Exchanger (PCHE) solutions. As a result, CompRex’s solution is especially suitable for Brayton cycle supercritical carbon dioxide (sCO2) systems given its high efficiency and significantly lower capitalmore » and operating expenses. CompRex has already successfully demonstrated its technology and ability to deliver with a pilot-scale compact heat exchanger that was under contract by the Naval Nuclear Laboratory for sCO2 power cycle development. The performance tested unit met or exceeded the thermal and hydraulic specifications with measured heat transfer between 95 to 98 % of maximum heat transfer and temperature and pressure drop values all consistent with the modeled values. CompRex’s vision is to commercialize its compact technology and become the leading provider for compact heat exchangers and heat exchange reactors for various applications including Brayton cycle sCO2 systems. One of the limitations of the sCO2 Brayton power cycle is the design and manufacturing of efficient heat exchangers at extreme operating conditions. Current diffusion-bonded heat exchangers have limitations on the channel size through which the fluid travels, resulting in excessive solid material per heat exchanger volume. CompRex’s design allows for more open area and shorter fluid proximity for increased heat transfer efficiency while sustaining the structural integrity needed for the application. CompRex is developing a novel improvement to its current heat exchanger design where fluids are directed to alternating channels so that each fluid is fully surrounded by the opposing fluid. As compared to similar existing compact heat exchangers, the new design converts most secondary surface area to primary surface area, eliminating fin inefficiencies. CompRex requests that all technical information about the heat exchanger designs be protected as proprietary information. To honor that request, only non-proprietay summaries are included in this report.« less
ELOPTA: a novel microcontroller-based operant device.
Hoffman, Adam M; Song, Jianjian; Tuttle, Elaina M
2007-11-01
Operant devices have been used for many years in animal behavior research, yet such devices a regenerally highly specialized and quite expensive. Although commercial models are somewhat adaptable and resilient, they are also extremely expensive and are controlled by difficult to learn proprietary software. As an alternative to commercial devices, we have designed and produced a fully functional, programmable operant device, using a PICmicro microcontroller (Microchip Technology, Inc.). The electronic operant testing apparatus (ELOPTA) is designed to deliver food when a study animal, in this case a bird, successfully depresses the correct sequence of illuminated keys. The device logs each keypress and can detect and log whenever a test animal i spositioned at the device. Data can be easily transferred to a computer and imported into any statistical analysis software. At about 3% the cost of a commercial device, ELOPTA will advance behavioral sciences, including behavioral ecology, animal learning and cognition, and ethology.
12. Photocopy of photograph (from Catalogue of Drugs, Chemicals, Proprietary ...
12. Photocopy of photograph (from Catalogue of Drugs, Chemicals, Proprietary Medicines, Pharmaceutical Preparations, Druggists' Sundries, Etc. Portland, ME: Cook, Everett, and Pennell, 1896.) ca. 1896, photographer unknown 'MAIN OFFICE AND COUNTING ROOM' - Woodman Building, 140 Middle Street, Portland, Cumberland County, ME
48 CFR 209.505-4 - Obtaining access to proprietary information.
Code of Federal Regulations, 2011 CFR
2011-10-01
...) Non-disclosure requirements for contractors accessing third party proprietary technical data or... may be required to enter into non-disclosure agreements directly with the third party asserting restrictions on limited rights technical data, commercial technical data, or restricted rights computer...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-29
... (Compliance Report of Proprietary Institutions) Activity: Comment Request AGENCY: Veterans Benefits Administration, Department of Veterans Affairs. ACTION: Notice. SUMMARY: The Veterans Benefits Administration... Department of Education are in compliance with equal opportunity laws. DATES: Written comments and...
NASA Astrophysics Data System (ADS)
Pinner, J. W., IV
2016-02-01
Data from shipboard oceanographic sensors are collected in various ASCii, binary, open and proprietary formats. Acquiring all of these formats using single, monolithic data acquisition system (DAS) can be cumbersome, complex and difficult to adapt for the ever changing suite of emerging oceanographic sensors. Another approach to the at-sea data acquisition challenge is to utilize multiple DAS software packages and corral the resulting data files with a ship-wide data management system. The Open Vessel Data Management project (OpenVDM) implements this second approach to ship-wide data management and over the last three years has successfully demonstrated it's ability to deliver a consistent cruise data package to scientists while reducing the workload placed on marine technicians. In addition to meeting the at-sea and post-cruise needs of scientists OpenVDM is helping vessel operators better adhere to the recommendations and best practices set forth by 3rd party data management and data quality groups such as R2R and SAMOS. OpenVDM also includes tools for supporting telepresence-enabled ocean research/exploration such as bandwidth-efficient ship-to-shore data transfers, shore-side data access, data visualization and near-real-time data quality tests and data statistics. OpenVDM is currently operating aboard three vessels. The R/V Endeavor, operated by the University of Rhode Island, is a regional-class UNOLS research vessel operating under the traditional NFS, P.I. driven model. The E/V Nautilus, operated by the Ocean Exploration Trust specializes in ROV-based, telepresence-enabled oceanographic research. The R/V Falkor operated by the Schmidt Ocean Institute is an ocean research platform focusing on cutting-edge technology development. These three vessels all have different missions, sensor suites and operating models yet all are able to leverage OpenVDM for managing their unique datasets and delivering a more consistent cruise data package to scientists and data archives.
Cryogenic Behavior of the High Temperature Crystal Oscillator PX-570
NASA Technical Reports Server (NTRS)
Patterson, Richard; Hammoud, Ahmad; Scherer, Steven
2011-01-01
Microprocessors, data-acquisition systems, and electronic controllers usually require timing signals for proper and accurate operation. These signals are, in most cases, provided by circuits that utilize crystal oscillators due to availability, cost, ease of operation, and accuracy. Stability of these oscillators, i.e. crystal characteristics, is usually governed, amongst other things, by the ambient temperature. Operation of these devices under extreme temperatures requires, therefore, the implementation of some temperature-compensation mechanism either through the manufacturing process of the oscillator part or in the design of the circuit to maintain stability as well as accuracy. NASA future missions into deep space and planetary exploration necessitate operation of electronic instruments and systems in environments where extreme temperatures along with wide-range thermal swings are countered. Most of the commercial devices are very limited in terms of their specified operational temperature while very few custom-made and military-grade parts have the ability to operate in a slightly wider range of temperature. Thus, it is becomes mandatory to design and develop circuits that are capable of operation efficiently and reliably under the space harsh conditions. This report presents the results obtained on the evaluation of a new (COTS) commercial-off-the-shelf crystal oscillator under extreme temperatures. The device selected for evaluation comprised of a 10 MHz, PX-570-series crystal oscillator. This type of device was recently introduced by Vectron International and is designed as high temperature oscillator [1]. These parts are fabricated using proprietary manufacturing processes designed specifically for high temperature and harsh environment applications [1]. The oscillators have a wide continuous operating temperature range; making them ideal for use in military and aerospace industry, industrial process control, geophysical fields, avionics, and engine control. They exhibit low jitter and phase noise, consume little power, and are suited for high shock and vibration applications. The unique package design of these crystal oscillators offers a small ceramic package footprint, as well as providing both through-hole mounting and surface mount options.
Shallow Water Optical Water Quality Buoy
NASA Technical Reports Server (NTRS)
Bostater, Charles
1998-01-01
This NASA grant was funded as a result of an unsolicited proposal submission to Kennedy Space Center. The proposal proposed the development and testing of a shallow water optical water quality buoy. The buoy is meant to work in shallow aquatic systems (ponds, rivers, lagoons, and semi-enclosed water areas where strong wind wave action is not a major environmental During the project period of three years, a demonstration of the buoy was conducted. The last demonstration during the project period was held in November, 1996 when the buoy was demonstrated as being totally operational with no tethered communications line. During the last year of the project the buoy was made to be solar operated by large gel cell batteries. Fund limitations did not permit the batteries in metal enclosures as hoped for higher wind conditions, however the system used to date has worked continuously for in- situ operation of over 18 months continuous deployment. The system needs to have maintenance and somewhat continuous operational attention since various components have limited lifetime ages. For example, within the last six months the onboard computer has had to be repaired as it did approximately 6 months after deployment. The spectrograph had to be repaired and costs for repairs was covered by KB Science since no ftmds were available for this purpose after the grant expired. Most recently the computer web page server failed and it is currently being repaired by KB Science. In addition, the cell phone operation is currently being ftmded by Dr. Bostater in order to maintain the system's operation. The above points need to be made to allow NASA to understand that like any sophisticated measuring system in a lab or in the field, necessary funding and maintenance is needed to insure the system's operational state and to obtain quality factor. The proposal stated that the project was based upon the integration of a proprietary and confidential sensor and probe design that was developed by KB Science and Engineering and is currently patented by KB Science. The buoy's purpose was to collected hyperspectral optical signatures for analysis and resulting estimation of water quality parameters such as chlorophyll-a, seston and dissolved organic matter (DOC). The ultimate goal of the project was to develop a buoy that would integrate a probe to measure upwelling light from a source and thus relate this backscattered light to water quality parameters.
10 Steps to Building an Architecture for Space Surveillance Projects
NASA Astrophysics Data System (ADS)
Gyorko, E.; Barnhart, E.; Gans, H.
Space surveillance is an increasingly complex task, requiring the coordination of a multitude of organizations and systems, while dealing with competing capabilities, proprietary processes, differing standards, and compliance issues. In order to fully understand space surveillance operations, analysts and engineers need to analyze and break down their operations and systems using what are essentially enterprise architecture processes and techniques. These techniques can be daunting to the first- time architect. This paper provides a summary of simplified steps to analyze a space surveillance system at the enterprise level in order to determine capabilities, services, and systems. These steps form the core of an initial Model-Based Architecting process. For new systems, a well defined, or well architected, space surveillance enterprise leads to an easier transition from model-based architecture to model-based design and provides a greater likelihood that requirements are fulfilled the first time. Both new and existing systems benefit from being easier to manage, and can be sustained more easily using portfolio management techniques, based around capabilities documented in the model repository. The resulting enterprise model helps an architect avoid 1) costly, faulty portfolio decisions; 2) wasteful technology refresh efforts; 3) upgrade and transition nightmares; and 4) non-compliance with DoDAF directives. The Model-Based Architecting steps are based on a process that Harris Corporation has developed from practical experience architecting space surveillance systems and ground systems. Examples are drawn from current work on documenting space situational awareness enterprises. The process is centered on DoDAF 2 and its corresponding meta-model so that terminology is standardized and communicable across any disciplines that know DoDAF architecting, including acquisition, engineering and sustainment disciplines. Each step provides a guideline for the type of data to collect, and also the appropriate views to generate. The steps include 1) determining the context of the enterprise, including active elements and high level capabilities or goals; 2) determining the desired effects of the capabilities and mapping capabilities against the project plan; 3) determining operational performers and their inter-relationships; 4) building information and data dictionaries; 5) defining resources associated with capabilities; 6) determining the operational behavior necessary to achieve each capability; 7) analyzing existing or planned implementations to determine systems, services and software; 8) cross-referencing system behavior to operational behavioral; 9) documenting system threads and functional implementations; and 10) creating any required textual documentation from the model.
Statistical Prediction in Proprietary Rehabilitation.
ERIC Educational Resources Information Center
Johnson, Kurt L.; And Others
1987-01-01
Applied statistical methods to predict case expenditures for low back pain rehabilitation cases in proprietary rehabilitation. Extracted predictor variables from case records of 175 workers compensation claimants with some degree of permanent disability due to back injury. Performed several multiple regression analyses resulting in a formula that…
48 CFR 6.305 - Availability of the justification.
Code of Federal Regulations, 2010 CFR
2010-10-01
... ACQUISITION PLANNING COMPETITION REQUIREMENTS Other Than Full and Open Competition 6.305 Availability of the... contractor proprietary data and remove all such data, and such references and citations as are necessary to protect the proprietary data, before making the justifications available for public inspection...
48 CFR 6.305 - Availability of the justification.
Code of Federal Regulations, 2011 CFR
2011-10-01
... ACQUISITION PLANNING COMPETITION REQUIREMENTS Other Than Full and Open Competition 6.305 Availability of the... contractor proprietary data and remove all such data, and such references and citations as are necessary to protect the proprietary data, before making the justifications available for public inspection...
11. Photocopy of photograph (from Catalogue of Drugs, Chemicals, Proprietary ...
11. Photocopy of photograph (from Catalogue of Drugs, Chemicals, Proprietary Medicines, Pharmaceutical Preparations, Druggists' Sundries, Etc. Portland, ME: Cook, Everett, and Pennell, 1896.) ca. 1896, photographer unknown 'SECTION OF MAIN FLOOR AND ORDER DEPARTMENT' - Woodman Building, 140 Middle Street, Portland, Cumberland County, ME
48 CFR 6.305 - Availability of the justification.
Code of Federal Regulations, 2014 CFR
2014-10-01
... ACQUISITION PLANNING COMPETITION REQUIREMENTS Other Than Full and Open Competition 6.305 Availability of the... contractor proprietary data and remove all such data, and such references and citations as are necessary to protect the proprietary data, before making the justifications available for public inspection...
48 CFR 6.305 - Availability of the justification.
Code of Federal Regulations, 2012 CFR
2012-10-01
... ACQUISITION PLANNING COMPETITION REQUIREMENTS Other Than Full and Open Competition 6.305 Availability of the... contractor proprietary data and remove all such data, and such references and citations as are necessary to protect the proprietary data, before making the justifications available for public inspection...
48 CFR 6.305 - Availability of the justification.
Code of Federal Regulations, 2013 CFR
2013-10-01
... ACQUISITION PLANNING COMPETITION REQUIREMENTS Other Than Full and Open Competition 6.305 Availability of the... contractor proprietary data and remove all such data, and such references and citations as are necessary to protect the proprietary data, before making the justifications available for public inspection...
Code of Federal Regulations, 2011 CFR
2011-04-01
...) Provides for the establishment of a public-use database to make available to the public mortgage data that...) Establishes mechanisms for the GSEs to designate mortgage data or AHAR information as proprietary information and for the Secretary to determine whether such mortgage data or AHAR information is proprietary...
Proprietary and voluntary home care agency evolution: the emergence of a new entity.
Balinsky, W; Shames, J N
1985-01-01
The objective of this paper is to document that the delivery of home care services and the corresponding ways in which they are marketed are evolving in both proprietary and voluntary providers. This evolution is producing the emergency of a new entity. In order to examine the present state, it is necessary to review the general history of the development of both voluntary (not-for-profit) and proprietary home health services. Then, an analysis of present conditions will show that these two forms of ownership are changing in ways that are making them more alike than different. This situation is leading to more intense competition for an expanding and diverse mix of home services. Program content and corresponding marketing techniques have crossed the industry's traditional lines blending into a wide array of services being offered by both voluntary and proprietary organizations. Despite their many shared goals and objectives, home care agencies still differ in their underlying philosophy which is based at least in part on their past.
1980-09-01
OF SCIENTIFIC INFORMATION SERVICES L EFENCE SDI - A USEFUL CURRENT AWARENESS SYSTEM (Dissemination Selective de L’Information, Sur la Defense: Un...Dalhousie University, Halifax, Nova Scotia. CAUTION This information is furnished with the express understanding that proprietary and patent rights will be...may add his knowledge of information exchange agreements and Canadian projects covered by these agreements. These exchange agreements are important
19 CFR 357.111 - Public and proprietary information.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 19 Customs Duties 3 2010-04-01 2010-04-01 false Public and proprietary information. 357.111 Section 357.111 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE SHORT SUPPLY...: (1) Business or trade secrets concerning the nature of a product or production process, if unique or...
19 CFR 357.111 - Public and proprietary information.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 19 Customs Duties 3 2011-04-01 2011-04-01 false Public and proprietary information. 357.111 Section 357.111 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE SHORT SUPPLY...: (1) Business or trade secrets concerning the nature of a product or production process, if unique or...
19 CFR 357.111 - Public and proprietary information.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 19 Customs Duties 3 2012-04-01 2012-04-01 false Public and proprietary information. 357.111 Section 357.111 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE SHORT SUPPLY...: (1) Business or trade secrets concerning the nature of a product or production process, if unique or...
Community College v. Proprietary School Outcomes: Student Satisfaction among Minority Males
ERIC Educational Resources Information Center
Wood, J. Luke; Vasquez Urias, Marissa C.
2012-01-01
There are numerous differences and similarities between community colleges and proprietary schools. Demographically, both institutional types serve high proportions of low-income and students of color. This study examines minority male (including African American, Hispanic, and Native American) satisfaction outcomes between institutional types.…
Terra-Kleen Response Group Inc. (Terra-Kleen), has commercialized a solvent extraction technology that uses a proprietary extraction solvent to transfer organic constituents from soil to a liquid phase in a batch process at ambient temperatures. The proprietary solvent has a rel...
14 CFR 1274.921 - Publications and reports: non-proprietary research results.
Code of Federal Regulations, 2010 CFR
2010-01-01
... media in which the research was discussed. The Recipient shall submit the following technical reports... research results. 1274.921 Section 1274.921 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE... Publications and reports: non-proprietary research results. The requirements set forth under this provision may...
47 CFR 76.938 - Proprietary information.
Code of Federal Regulations, 2010 CFR
2010-10-01
... CABLE TELEVISION SERVICE Cable Rate Regulation § 76.938 Proprietary information. A franchising authority... Form 393 (and/or FCC Forms 1200/1205) filing or a cost-of-service showing. The franchising authority... specifically relates. Upon request to the franchising authority, the parties to a rate proceeding shall have...
Spinazola, J.M.; Hansen, C.V.; Underwood, E.J.; Kenny, J.F.; Wolf, R.J.
1987-01-01
Machine-readable geohydrologic data for Precambrian through Cretaceous rocks in Kansas were compiled as part of the USGS Central Midwest Regional Aquifer System Analysis. The geohydrologic data include log, water quality, water level, hydraulics, and water use information. The log data consist of depths to the top of selected geologic formations determined from about 275 sites with geophysical logs and formation lithologies from about 190 sites with lithologic logs. The water quality data consist of about 10,800 analyses, of which about 1 ,200 are proprietary. The water level data consist of about 4 ,480 measured water levels and about 4,175 equivalent freshwater hydraulic heads, of which about 3,745 are proprietary. The hydraulics data consist of results from about 30 specific capacity tests and about 20 aquifer tests, and interpretations of about 285 drill stem tests (of which about 60 are proprietary) and about 75 core-sample analyses. The water use data consist of estimates of freshwater withdrawals from Precambrian through Cretaceous geohydrologic units for each of the 105 counties in Kansas. Average yearly withdrawals were estimated for each decade from 1940 to 1980. All the log and water use data and the nonproprietary parts of the water quality , water level, and hydraulics data are available on magnetic tape from the USGS office in Lawrence, Kansas. (Author 's abstract)
Faculty Experiences of Internet Filtering at a Proprietary Higher Education Institution
ERIC Educational Resources Information Center
Rzemyk, Thomas J.
2011-01-01
Despite widespread acknowledgement that Internet access in libraries and schools is filtered, the effects of that filtering on faculty who must utilize such a system for research, teaching, and curriculum development in American higher education are not known. This qualitative case study explored faculty experiences of Internet filtering in terms…
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-26
... proprietary software (e.g., Amazon's Kindle) to multipurpose devices running free software applications (e.g... Media Rights, Mozilla Corporation (``Mozilla''), and the Free Software Foundation (``FSF''), as well as... radical popularity over the past two years.'' EFF asserted that courts have long found copying and...
Policy Issues in Computer Networks: Multi-Access Information Systems.
ERIC Educational Resources Information Center
Lyons, Patrice A.
As computer databases become more publicly accessible through public networks, there is a growing need to provide effective protection for proprietary information. Without adequate assurances that their works will be protected, authors and other copyright owners may be reluctant to allow the full text of their works to be accessed through computer…
Code of Federal Regulations, 2013 CFR
2013-04-01
... or integrity of the game, and are specially manufactured or proprietary and not off-the-shelf, must... the potential to affect the outcome or integrity of any game, progressive award, financial instrument... of a robust construction designed to resist determined illegal entry. All protuberances and...
Code of Federal Regulations, 2014 CFR
2014-04-01
... or integrity of the game, and are specially manufactured or proprietary and not off-the-shelf, must... the potential to affect the outcome or integrity of any game, progressive award, financial instrument... of a robust construction designed to resist determined illegal entry. All protuberances and...
28 CFR 51.20 - Form of submissions.
Code of Federal Regulations, 2012 CFR
2012-07-01
... set. A separate data dictionary file documenting the fields in the data set, the field separators or... data set. Proprietary or commercial software system data files (e.g., SAS, SPSS, dBase, Lotus 1-2-3... General will accept certain machine readable data in the following electronic media: 3.5 inch 1.4 megabyte...
28 CFR 51.20 - Form of submissions.
Code of Federal Regulations, 2013 CFR
2013-07-01
... set. A separate data dictionary file documenting the fields in the data set, the field separators or... data set. Proprietary or commercial software system data files (e.g., SAS, SPSS, dBase, Lotus 1-2-3... General will accept certain machine readable data in the following electronic media: 3.5 inch 1.4 megabyte...
28 CFR 51.20 - Form of submissions.
Code of Federal Regulations, 2014 CFR
2014-07-01
... set. A separate data dictionary file documenting the fields in the data set, the field separators or... data set. Proprietary or commercial software system data files (e.g., SAS, SPSS, dBase, Lotus 1-2-3... General will accept certain machine readable data in the following electronic media: 3.5 inch 1.4 megabyte...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-10
... principles reflected in its legislative history. If the free market should determine whether proprietary data.... ``In fact, the legislative history indicates that the Congress intended that the market system `evolve... Subscribers will not purchase in sufficient numbers. Internet portals, such as Google, impose a discipline by...
Providing Author-Defined State Data Storage to Learning Objects
ERIC Educational Resources Information Center
Kassahun, Ayalew; Beulens, Adrie; Hartog, Rob
2006-01-01
Two major trends in eLearning are the shift from presentational towards activating learning objects and the shift from proprietary towards SCORM conformant delivery systems. In a large program on the design, development and use of digital learning material for food and biotechnology in higher education, a large amount of experience has been gained…
Adjuncts to local anesthesia: separating fact from fiction.
Wong, J K
2001-01-01
Adjunctive local anesthetic techniques and their armamentaria, such as intraosseous injection, computer-controlled delivery systems, periodontal ligament injection and needleless jet injection, have been proposed to hold particular advantages over conventional means of achieving local anesthesia. This article describes the use of each technique and proprietary armamentarium and reviews the literature appraising their use.
Community College Faculty and Web-Based Classes
ERIC Educational Resources Information Center
Smith, Vernon C.; Rhoades, Gary
2006-01-01
Web-based, e-learning classes, or online classes that use a proprietary course management system such as Blackboard, are an increasingly prominent part of higher education, particularly in community colleges. In fact, more than three-quarters of community colleges now offer the same course in face-to-face and online modes. And community colleges…
Tremblay, Jaëlle; Mac-Thiong, Jean-Marc; Brailovski, Vladimir; Petit, Yvan
2015-09-01
This study investigates the use of braided tubular superelastic cables, previously used for sternum closure following sternotomy, as sublaminar fixation method. It compares the biomechanical performance of spinal instrumentation fixation systems with regular sublaminar cables and proprietary superelastic cables. A hybrid experimental protocol was applied to six porcine L1-L4 spinal segments to compare multifilament sublaminar cables (Atlas, Medtronic Sofamor Danek, Memphis, TN) with proprietary superelastic cables. First, intact total range of motion was determined for all specimens using pure moment loading. Second, pure moments were imposed to the instrumented specimens until these intact total ranges of motion were reproduced. Compared to the intact specimens, the use of superelastic cables resulted in stiffer instrumented specimens than the use of multifilament cables for all the loading modes except axial torsion. Consequently, the superelastic cables limited the instrumented segments mobility more than the multifilament cables. Spinal instrumentation fixation systems using superelastic cables could be a good alternative to conventional sublaminar cables as it maintains a constant stabilization of the spine during loading. © IMechE 2015.
Silicon Carbide (SiC) MOSFET-based Full-Bridge for Fusion Science Applications
NASA Astrophysics Data System (ADS)
Ziemba, Timothy; Miller, Kenneth; Prager, James; Picard, Julian; Hashim, Akel
2014-10-01
Switching power amplifiers (SPAs) have a wide variety of applications within the fusion science community, including feedback and control systems for dynamic plasma stabilization in tokamaks, inductive and arc plasma sources, Radio Frequency (RF) helicity and flux injection, RF plasma heating and current drive schemes, ion beam generation, and RF pre-ionizer systems. SiC MOSFETs offer many advantages over IGBTs including lower drive energy requirements, lower conduction and switching losses, and higher switching frequency capabilities. When comparing SiC and traditional silicon-based MOSFETs, SiC MOSFETs provide higher current carrying capability allowing for smaller package weights and sizes and lower operating temperature. Eagle Harbor Technologies (EHT) is designing, constructing, and testing a SiC MOSFET-based full-bridge SPA. EHT will leverage the proprietary gate drive technology previously developed with the support of a DOE SBIR, which will enable fast, efficient switching in a small form factor. The primary goal is to develop a SiC MOSFET-based SPA for fusion science applications. Work supported in part by the DOE under Contract Number DE-SC0011907.
Manufacturing information system
NASA Astrophysics Data System (ADS)
Allen, D. K.; Smith, P. R.; Smart, M. J.
1983-12-01
The size and cost of manufacturing equipment has made it extremely difficult to perform realistic modeling and simulation of the manufacturing process in university research laboratories. Likewise the size and cost factors, coupled with many uncontrolled variables of the production situation has even made it difficult to perform adequate manufacturing research in the industrial setting. Only the largest companies can afford manufacturing research laboratories; research results are often held proprietary and seldom find their way into the university classroom to aid in education and training of new manufacturing engineers. It is the purpose for this research to continue the development of miniature prototype equipment suitable for use in an integrated CAD/CAM Laboratory. The equipment being developed is capable of actually performing production operations (e.g. drilling, milling, turning, punching, etc.) on metallic and non-metallic workpieces. The integrated CAD/CAM Mini-Lab is integrating high resolution, computer graphics, parametric design, parametric N/C parts programmings, CNC machine control, automated storage and retrieval, with robotics materials handling. The availability of miniature CAD/CAM laboratory equipment will provide the basis for intensive laboratory research on manufacturing information systems.
Ryals, John; Lawton, Kay; Stevens, Daniel; Milburn, Michael
2007-07-01
Metabolon is an emerging technology company developing proprietary analytical methods and software for biomarker discovery using metabolomics. The company's aim is to measure all small molecules (<1500 Da) in a biological sample. These small-molecule compounds include biochemicals of cellular metabolism and xenobiotics from diet and environment. Our proprietary mLIMStrade mark system contains advanced metabolomic software and automated data-processing tools that use a variety of data-analysis and quality-control algorithms to convert raw mass-spectrometry data to identified, quantitated compounds. Metabolon's primary focus is a fee-for-service business that exploits this technology for pharmaceutical and biotechnology companies, with additional clients in the consumer goods, cosmetics and agricultural industries. Fee-for-service studies are often collaborations with groups that employ a variety of technologies for biomarker discovery. Metabolon's goal is to develop technology that will automatically analyze any sample for the small-molecule components present and become a standard technology for applications in health and related sciences.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Veedu, Vinod; Hadmack, Michael; Pollock, Jacob
Nanite™ is a cementitious material that contains a proprietary formulation of functionalized nanomaterial additive to transform conventional cement into a smart material responsive to pressure (or stress), temperature, and any intrinsic changes in composition. This project has identified optimal sensing modalities of smart well cement and demonstrated how real-time sensing of Nanite™ can improve long-term wellbore integrity and zonal isolation in shale gas and applicable oil and gas operations. Oceanit has explored Nanite’s electrical sensing properties in depth and has advanced the technology from laboratory proof-of-concept to sub-scale testing in preparation for field trials.
9 CFR 73.10 - Permitted dips; substances allowed.
Code of Federal Regulations, 2010 CFR
2010-01-01
... follows: (1) Lime-sulphur dip, other than proprietary brands thereof, made in the proportion of 12 pounds of unslaked lime (or 16 pounds of commercial hydrated lime, not airslaked lime) and 24 pounds of... of lime-sulphur dip. (2) Dips made from specifically permitted proprietary brand emulsions of...
ERIC Educational Resources Information Center
Foster, Lisa K.
2004-01-01
Postsecondary education in California includes public community colleges and universities, private nonprofit colleges and universities, and private proprietary and for-profit schools. While small in number compared with public and private nonprofit institutions, proprietary and for-profit schools and career colleges are growing and serving an…
DOT National Transportation Integrated Search
2013-08-01
Cable median barriers are widely used across the country to prevent cross-median crashes. Several years ago, the Midwest States Pooled Fund Program contracted with the Midwest Roadside Safety Facility (MwRSF) to develop a new, non-proprietary, high-t...
Cable-to-post attachments for use in non-proprietary high-tension cable median barrier - phase II.
DOT National Transportation Integrated Search
2016-03-24
The objective of this study was to reevaluate and improve the existing cable-to-post attachment hardware that is utilized : in the non-proprietary cable barrier being developed at MwRSF. The study focused on redesigning the bolted, tabbed : bracket (...
Design of an improved post for use in a non-proprietary high-tension cable median barrier.
DOT National Transportation Integrated Search
2015-05-01
The objective of this research study was to develop a revised post section for the non-proprietary high-tension cable : median barrier that improved the safety and function of the post by lowering strong-axis forces. A total of twenty dynamic : compo...
14 CFR 1274.921 - Publications and reports: non-proprietary research results.
Code of Federal Regulations, 2011 CFR
2011-01-01
... where the Recipient requests that the results of the research be published in a NASA scientific or... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Publications and reports: non-proprietary research results. 1274.921 Section 1274.921 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE...
47 CFR 51.317 - Standards for requiring the unbundling of network elements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... network elements. 51.317 Section 51.317 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED... Carriers § 51.317 Standards for requiring the unbundling of network elements. (a) Proprietary network elements. A network element shall be considered to be proprietary if an incumbent LEC can demonstrate that...
47 CFR 51.317 - Standards for requiring the unbundling of network elements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... network elements. 51.317 Section 51.317 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED... Carriers § 51.317 Standards for requiring the unbundling of network elements. (a) Proprietary network elements. A network element shall be considered to be proprietary if an incumbent LEC can demonstrate that...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-11
... quantitative research and evaluation process that forecasts economic excess sector returns (over/under the... proprietary SectorSAM quantitative research and evaluation process. \\8\\ The following convictions constitute... Allocation Methodology'' (``SectorSAM''), which is a proprietary quantitative analysis, to forecast each...
19 CFR 207.30 - Comment on information.
Code of Federal Regulations, 2010 CFR
2010-04-01
... SUBSIDIZED EXPORTS TO THE UNITED STATES Final Determinations, Short Life Cycle Products § 207.30 Comment on... information that is business proprietary information will be released to persons authorized to obtain such... changes in bracketing of business proprietary information in the comments permitted by § 207.3(c). [61 FR...
Buyers Guide: Communications Software--Overview; Ratings Digest; Reviews; Benchmarks.
ERIC Educational Resources Information Center
Lockwood, Russ; And Others
1988-01-01
Contains articles which review communications software. Includes "Crosstalk Mark 4,""ProComm,""Freeway Advanced,""Windows InTalk,""Relay Silver," and "Smartcom III." Compares in terms of text proprietary, MCI upload, Test ASCII, Spreadsheet Proprietary, Text XMODEM, Spreadsheet XMODEM, MCI Download, Documentation, Support and Service, ease of use,…
[Non-biological 3D printed simulator for training in percutaneous nephro- lithotripsy].
Alyaev, Yu G; Sirota, E S; Bezrukov, E A; Ali, S Kh; Bukatov, M D; Letunovskiy, A V; Byadretdinov, I Sh
2018-03-01
To develop a non-biological 3D printed simulator for training and preoperative planning in percutaneous nephrolithotripsy (PCNL), which allows doctors to master and perform all stages of the operation under ultrasound and fluoroscopy guidance. The 3D model was constructed using multislice spiral computed tomography (MSCT) images of a patient with staghorn urolithiasis. The MSCT data were processed and used to print the model. The simulator consisted of two parts: a non-biological 3D printed soft model of a kidney with reproduced intra-renal vascular and collecting systems and a printed 3D model of a human body. Using this 3D printed simulator, PCNL was performed in the interventional radiology operating room under ultrasound and fluoroscopy guidance. The designed 3D printed model of the kidney completely reproduces the individual features of the intra-renal structures of the particular patient. During the training, all the main stages of PCNL were performed successfully: the puncture, dilation of the nephrostomy tract, endoscopic examination, intra-renal lithotripsy. Our proprietary 3D-printed simulator is a promising development in the field of endourologic training and preoperative planning in the treatment of complicated forms of urolithiasis.
NASA Astrophysics Data System (ADS)
Kastek, Mariusz; PiÄ tkowski, Tadeusz; Polakowski, Henryk; Barela, Jaroslaw; Firmanty, Krzysztof; Trzaskawka, Piotr; Vergara, German; Linares, Rodrigo; Gutierrez, Raul; Fernandez, Carlos; Montojo Supervielle, Maria Teresa
2014-05-01
The paper presents some aspects of muzzle flash detection using low resolution polycrystalline PbSe 32×32 and 80×80 detectors FPA operating at room temperature (uncooled performance). These sensors, which detect in MWIR (3 - 5 microns region) and are manufactured using proprietary technology from New Infrared Technologies (VPD PbSe - Vapor Phase Deposition of polycrystalline PbSe), can be applied to muzzle flash detection. The system based in the uncooled 80×80 FPA monolithically integrated with the CMOS readout circuitry has allowed image recording with frame rates over 2000 Hz (true snapshot acquisition), whereas the lower density, uncooled 32×32 FPA is suitable for being used in low cost infrared imagers sensitive in the MWIR band with frame rates above 1000 Hz. The FPA detector, read-out electronics and processing electronics (allows the implementation of some algorithms for muzzle flash detection) of both systems are presented. The systems have been tested at field test ground. Results of detection range measurement with two types of optical systems (wide and narrow field of view) have been shown. The theoretical analysis of possibility detection of muzzle flash and initial results of testing of some algorithms for muzzle flash detection have been presented too.
Demonstration of Isothermal Compressed Air Energy Storage to Support Renewable Energy Production
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bollinger, Benjamin
This project develops and demonstrates a megawatt (MW)-scale Energy Storage System that employs compressed air as the storage medium. An isothermal compressed air energy storage (ICAES TM) system rated for 1 MW or more will be demonstrated in a full-scale prototype unit. Breakthrough cost-effectiveness will be achieved through the use of proprietary methods for isothermal gas cycling and staged gas expansion implemented using industrially mature, readily-available components.The ICAES approach uses an electrically driven mechanical system to raise air to high pressure for storage in low-cost pressure vessels, pipeline, or lined-rock cavern (LRC). This air is later expanded through the samemore » mechanical system to drive the electric motor as a generator. The approach incorporates two key efficiency-enhancing innovations: (1) isothermal (constant temperature) gas cycling, which is achieved by mixing liquid with air (via spray or foam) to exchange heat with air undergoing compression or expansion; and (2) a novel, staged gas-expansion scheme that allows the drivetrain to operate at constant power while still allowing the stored gas to work over its entire pressure range. The ICAES system will be scalable, non-toxic, and cost-effective, making it suitable for firming renewables and for other grid applications.« less
Near real-time, on-the-move software PED using VPEF
NASA Astrophysics Data System (ADS)
Green, Kevin; Geyer, Chris; Burnette, Chris; Agarwal, Sanjeev; Swett, Bruce; Phan, Chung; Deterline, Diane
2015-05-01
The scope of the Micro-Cloud for Operational, Vehicle-Based EO-IR Reconnaissance System (MOVERS) development effort, managed by the Night Vision and Electronic Sensors Directorate (NVESD), is to develop, integrate, and demonstrate new sensor technologies and algorithms that improve improvised device/mine detection using efficient and effective exploitation and fusion of sensor data and target cues from existing and future Route Clearance Package (RCP) sensor systems. Unfortunately, the majority of forward looking Full Motion Video (FMV) and computer vision processing, exploitation, and dissemination (PED) algorithms are often developed using proprietary, incompatible software. This makes the insertion of new algorithms difficult due to the lack of standardized processing chains. In order to overcome these limitations, EOIR developed the Government off-the-shelf (GOTS) Video Processing and Exploitation Framework (VPEF) to be able to provide standardized interfaces (e.g., input/output video formats, sensor metadata, and detected objects) for exploitation software and to rapidly integrate and test computer vision algorithms. EOIR developed a vehicle-based computing framework within the MOVERS and integrated it with VPEF. VPEF was further enhanced for automated processing, detection, and publishing of detections in near real-time, thus improving the efficiency and effectiveness of RCP sensor systems.
NASA Technical Reports Server (NTRS)
Aretskin-Hariton, Eliot D.; Zinnecker, Alicia Mae; Culley, Dennis E.
2014-01-01
Distributed Engine Control (DEC) is an enabling technology that has the potential to advance the state-of-the-art in gas turbine engine control. To analyze the capabilities that DEC offers, a Hardware-In-the-Loop (HIL) test bed is being developed at NASA Glenn Research Center. This test bed will support a systems-level analysis of control capabilities in closed-loop engine simulations. The structure of the HIL emulates a virtual test cell by implementing the operator functions, control system, and engine on three separate computers. This implementation increases the flexibility and extensibility of the HIL. Here, a method is discussed for implementing these interfaces by connecting the three platforms over a dedicated Local Area Network (LAN). This approach is verified using the Commercial Modular Aero-Propulsion System Simulation 40k (C-MAPSS40k), which is typically implemented on one computer. There are marginal differences between the results from simulation of the typical and the three-computer implementation. Additional analysis of the LAN network, including characterization of network load, packet drop, and latency, is presented. The three-computer setup supports the incorporation of complex control models and proprietary engine models into the HIL framework.
A New Remote Communications Link to Reduce Residential PV Solar Costs
DOE Office of Scientific and Technical Information (OSTI.GOV)
King, Randy; Sugiyama, Rod
Monitoring of PV/DER site production is expensive to install and unreliable. Among third party systems providers, lost communications links are a growing concern. Nearly 20% of links are failing, provisioning is complex, recovery is expensive, production data is lost, and access is fragmented. FleetLink is a new concept in DER system communications, purpose built for lowering the cost of maintaining active contact with residential end user sites and ensuring that production data is reliably available to third party systems providers. Systems providers require accurate, secure system monitoring and reporting of production data and system faults while driving down overall costsmore » to compete effectively. This plug and play, independently operating communications solution lowers the cost of fleet contact from typically .08 dollars-$.12/W down to .02 dollars -.03/W including installation and maintenance expenses. FleetLink establishes a breakthrough in simplicity that facilitates rapid expansion of residential solar by reducing initial capital outlay and lowering installation labor time and skill levels. The solution also facilitates higher DER installation growth rates by driving down maintenance costs and eliminating communications trouble calls. This is accomplished by the FleetLink’s unique network technology that enables dynamic network configuration for fast changes, and active, self-healing DER site contact for uptime assurance. Using an open source network framework with proprietary, application specific enhancements, FleetLink independently manages connectivity, security, recovery, grid control communications, and fleet expansion while presenting a compliant SunSpec interface to the third party operations centers. The net system cost savings of at least .05 dollars/W supports the SunShot cost goals and the flexibility and scalability of the solution accelerates the velocity and ubiquitous adoption of solar.« less
Recommendations for a service framework to access astronomical archives
NASA Technical Reports Server (NTRS)
Travisano, J. J.; Pollizzi, J.
1992-01-01
There are a large number of astronomical archives and catalogs on-line for network access, with many different user interfaces and features. Some systems are moving towards distributed access, supplying users with client software for their home sites which connects to servers at the archive site. Many of the issues involved in defining a standard framework of services that archive/catalog suppliers can use to achieve a basic level of interoperability are described. Such a framework would simplify the development of client and server programs to access the wide variety of astronomical archive systems. The primary services that are supplied by current systems include: catalog browsing, dataset retrieval, name resolution, and data analysis. The following issues (and probably more) need to be considered in establishing a standard set of client/server interfaces and protocols: Archive Access - dataset retrieval, delivery, file formats, data browsing, analysis, etc.; Catalog Access - database management systems, query languages, data formats, synchronous/asynchronous mode of operation, etc.; Interoperability - transaction/message protocols, distributed processing mechanisms (DCE, ONC/SunRPC, etc), networking protocols, etc.; Security - user registration, authorization/authentication mechanisms, etc.; Service Directory - service registration, lookup, port/task mapping, parameters, etc.; Software - public vs proprietary, client/server software, standard interfaces to client/server functions, software distribution, operating system portability, data portability, etc. Several archive/catalog groups, notably the Astrophysics Data System (ADS), are already working in many of these areas. In the process of developing StarView, which is the user interface to the Space Telescope Data Archive and Distribution Service (ST-DADS), these issues and the work of others were analyzed. A framework of standard interfaces for accessing services on any archive system which would benefit archive user and supplier alike is proposed.
NASA Technical Reports Server (NTRS)
Harding, R. A.
1981-01-01
A Washington geographic information system is described. The system has thrust from two different angles: the proprietary need for information to support the management of five million acres of thrust lands by the Department of Natural Resources, and the need for data over the entire state because of statewide governmental responsibilities. The data base includes information relevant to agricultural, forest, industrial, business, and community growth with emphasis on assembling information useful in setting intermediate and long-range goals. System selection procedures and system feasibility studies are discussed.
Silicon Micromachined Sensor for Broadband Vibration Analysis
NASA Technical Reports Server (NTRS)
Gutierrez, Adolfo; Edmans, Daniel; Cormeau, Chris; Seidler, Gernot; Deangelis, Dave; Maby, Edward
1995-01-01
The development of a family of silicon based integrated vibration sensors capable of sensing mechanical resonances over a broad range of frequencies with minimal signal processing requirements is presented. Two basic general embodiments of the concept were designed and fabricated. The first design was structured around an array of cantilever beams and fabricated using the ARPA sponsored multi-user MEMS processing system (MUMPS) process at the Microelectronics Center of North Carolina (MCNC). As part of the design process for this first sensor, a comprehensive finite elements analysis of the resonant modes and stress distribution was performed using PATRAN. The dependence of strain distribution and resonant frequency response as a function of Young's modulus in the Poly-Si structural material was studied. Analytical models were also studied. In-house experimental characterization using optical interferometry techniques were performed under controlled low pressure conditions. A second design, intended to operate in a non-resonant mode and capable of broadband frequency response, was proposed and developed around the concept of a cantilever beam integrated with a feedback control loop to produce a null mode vibration sensor. A proprietary process was used to integrat a metal-oxide semiconductor (MOS) sensing device, with actuators and a cantilever beam, as part of a compatible process. Both devices, once incorporated as part of multifunction data acquisition and telemetry systems will constitute a useful system for NASA launch vibration monitoring operations. Satellite and other space structures can benefit from the sensor for mechanical condition monitoring functions.
Soldier experiments and assessments using SPEAR speech control system for UGVs
NASA Astrophysics Data System (ADS)
Brown, Jonathan; Blanco, Chris; Czerniak, Jeffrey; Hoffman, Brian; Hoffman, Orin; Juneja, Amit; Ngia, Lester; Pruthi, Tarun; Liu, Dongqing
2010-04-01
This paper reports on a Soldier Experiment performed by the Army Research Lab's Human Research Engineering Directorate (HRED) Field Element located at the Maneuver Center of Excellence, Ft. Benning, and a Limited Use Assessment conducted by the Marine Corps Forces Pacific Command Experimentation Center (MEC) at Camp Pendleton evaluating the effectiveness of using speech commands to control an Unmanned Ground Vehicle. SPEAR, developed by Think-A-Move, Ltd., provides speech control of UGVs. SPEAR detects user speech in the ear canal with an earpiece containing an in-ear microphone. The system design provides up to 30 dB of passive noise reduction, enabling it to work well in high-noise environments, where traditional speech systems, using external microphones, fail; it also utilizes a proprietary speech recognition engine. SPEAR has been integrated with iRobot's PackBot 510 with FasTac Kit, and with Multi-Robot Operator Control Unit (MOCU), developed by SPAWAR Systems Center Pacific. These integrated systems allow speech to supplement the hand-controller for multi-modal control of different UGV functions simultaneously. HRED's experiment measured the impact of SPEAR on reducing the cognitive load placed on UGV Operators and the time to complete specific tasks. Army NCOs and Officer School Candidates participated in this experiment, which found that speech control was faster than manual control to complete tasks requiring menu navigation, as well as reducing the cognitive load on UGV Operators. The MEC assessment examined speech commands used for two different missions: Route Clearance and Cordon and Search; participants included Explosive Ordnance Disposal Technicians and Combat Engineers. The majority of the Marines thought it was easier to complete the mission scenarios with SPEAR than with only using manual controls, and that using SPEAR improved their situational awareness. Overall results of these Assessments are reported in the paper, along with possible applications to autonomous mine detection systems.
Thermal characterization of phacoemulsification probes operated in axial and torsional modes.
Zacharias, Jaime
2015-01-01
To analyze temperature increases and identify potential sources of heat generated when sleeved and sleeveless phacoemulsification probes were operated in axial and torsional modes using the Infiniti Vision System with the Ozil torsional handpiece. Phacodynamics Laboratory, Pasteur Ophthalmic Clinic, Santiago, Chile. Experimental study. Two computer-controlled thermal transfer systems were developed to evaluate the contribution of internal metal stress and tip-to-sleeve friction on heat generation during phacoemulsification using axial and torsional ultrasound modalities. Both systems incorporated infrared thermal imaging and used a black-body film to accurately capture temperature measurements. Axial mode was consistently associated with greater temperature increases than torsional mode whether tips were operated with or without sleeves. In tests involving bare tips, axial mode and torsional mode peaked at 51.7°C and 34.2°C, respectively. In an example using sleeved tips in which a 30.0 g load was applied for 1 second, temperatures for axial mode reached 45°C and for torsional mode, 38°C. Friction between the sleeved probe and the incisional wall contributed more significantly to the temperature increase than internal metal stress regardless of the mode used. In all experiments, the temperature increase observed with axial mode was greater than that observed with torsional mode, even when conditions such as power or amplitude and flow rate were varied. Tip-to-sleeve friction was a more dominant source of phaco probe heating than internal metal stress. The temperature increase due to internal metal stress was greater with axial mode than with torsional mode. Dr. Zacharias received research funding from Alcon Laboratories, Inc., to conduct this study. He has no financial or proprietary interest in any material or method mentioned. Copyright © 2015 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.
2011-08-01
dominates the global mobile application market and mobile computing software ecosystems. But overall, OA systems are not necessarily excluded from...License 3.0 (OSL) Corel Transactional License ( CTL ) The licenses were chosen to represent a variety of kinds of licenses, and include one...proprietary ( CTL ), three academic (Apache, BSD, MIT), and six reciprocal licenses (CPL, EPL, GPL, LGPL, MPL, OSL) that take varying approaches in
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-17
... Market Maker,\\5\\ Firm Proprietary and Customer (Professional) \\6\\ orders; and (ii) $0.78 per contract for Non-ISE Market Maker \\7\\ orders. Priority Customer \\8\\ orders are not charged a ``taker'' fee for... Proprietary and Customer (Professional) orders. Priority Customer orders are not charged a ``maker'' fee for...
17 CFR 31.9 - Minimum financial requirements.
Code of Federal Regulations, 2010 CFR
2010-04-01
... term “customer” means customer as defined in § 31.4(d); (ii) The term “proprietary account” means a... the definition of customer (as defined in paragraph (b)(2)(i) of this section) or proprietary account... demonstrates to the satisfaction of the Commission that it complies with the financial requirements of this...
Beyond Defaults: Indicators for Assessing Proprietary School Quality.
ERIC Educational Resources Information Center
Goodwin, David
Largely because of high student loan default rates, much of the criticism of federal aid programs has focused on policies and practices affecting the participation of proprietary schools in federal student aid. This report reviews alternative indicators of school performance that are currently used or could be used by the federal student aid…
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-01
... privacy of customer proprietary network information and carrier proprietary information from unauthorized... infrastructure will acquire information regarding interconnected VoIP providers and their customers for use in... for the provision of E911 services. To be clear, no entity may use customer information obtained as a...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-02
... committee uses third-party analyst research and a proprietary fundamental process to make allocation... investment process: Step 1: The Sub-Adviser's use of third-party research consists of analyzing the consensus... analyst research and a proprietary fundamental process to make allocation decisions. Changes to the Fund's...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-10
... legislative history. If the free market should determine whether proprietary data is sold to broker-dealers at... reasonable and equitably allocated fees for market data. ``In fact, the legislative history indicates that... proprietary products that end users will not purchase in sufficient numbers. Internet portals, such as Google...
26 CFR 1.368-1T - Purpose and scope of exception of reorganization exchanges (temporary).
Code of Federal Regulations, 2011 CFR
2011-04-01
.... In determining whether a proprietary interest in the target corporation is preserved, the consideration to be exchanged for the proprietary interests in the target corporation pursuant to a contract to... interest in the target corporation is preserved. If the contract does not provide for fixed consideration...
Predicting Student Achievement and Attrition in a Proprietary Technical College.
ERIC Educational Resources Information Center
Taube, Sylvia R.; Taube, Paul M.
1991-01-01
Analysis of data on 101 entering proprietary college students found that (1) predictors of initial achievement were entrance exam scores, gender, race, age, grade point average, and expectations; (2) dropout predictors were marital status, work hours, prior achievement, absences, and faculty interaction; and (3) age, gender, race, and children did…
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-11
... Quote Traders and Remote Streaming Quote Traders Entering Certain Option Day Limit Orders August 5, 2011... allow entry of day limit orders for the proprietary accounts of Streaming Quote Traders and Remote... proprietary accounts of Streaming Quote Traders (SQTs'') and Remote Streaming Quote Traders (``RSQTs''). The...
26 CFR 1.368-1T - Purpose and scope of exception of reorganization exchanges (temporary).
Code of Federal Regulations, 2010 CFR
2010-04-01
.... In determining whether a proprietary interest in the target corporation is preserved, the consideration to be exchanged for the proprietary interests in the target corporation pursuant to a contract to... interest in the target corporation is preserved. If the contract does not provide for fixed consideration...
76 FR 78540 - Corporate Reorganizations; Guidance on the Measurement of Continuity of Interest
Federal Register 2010, 2011, 2012, 2013, 2014
2011-12-19
... substance, a substantial part of the value of the proprietary interests in the target corporation be preserved in the reorganization. A proprietary interest in the target corporation is preserved if, in a... exchanged by the acquiring corporation for a direct interest in the target corporation enterprise, or it...
ERIC Educational Resources Information Center
Chitwood, James
2010-01-01
The success of an enrollment department is critical to the success of an educational institution. The quantitative research study used a correlational design to measure the relationship between perceived leadership style, employee satisfaction, and departmental productivity. A sample of 41 admissions personnel from a Midwest proprietary university…
Code of Federal Regulations, 2010 CFR
2010-04-01
... down by law, regulation, or administrative action relating to proprietary medicinal products as... provisions laid down by law, regulation or administrative action relating to proprietary medicinal products... approximation of the laws of the Member States relating to veterinary medicinal products, as widened and amended...
19 CFR 356.10 - Procedures for obtaining access to proprietary information.
Code of Federal Regulations, 2010 CFR
2010-04-01
... secretary if such person: (i) Is not involved in competitive decision-making for a participant in the panel review or for any person that would gain competitive advantage through knowledge of the proprietary... and each copy as the first page of the document. (4) Service of applications—(i) Persons described in...
Benefits and Challenges of Architecture Frameworks
2011-06-01
systems and identify emerging and obsolete standards. • The NATO Capability View ( NCV ) serves the analysis and optimization of military ca- pabilities... NCVs show the dependencies between different capabilities and allow detecting gaps and overlaps of capabilities. NCVs deliver indirectly requirements...Email (possibly with vendor-specific extensions/modifications) • Proprietary, and possibly not well-documented, message formats • Web services
Investigating Advances in the Acquisition of Secure Systems Based on Open Architectures
2012-08-30
markets (Guertin & Womble, 2012), efficient testing of component‐based OA...workalike of the closed‐source Second Life VW platform. Second Life (2012) is the current market leader in rapid virtual world development and...Strong Copyleft GPL, AGPL Many rights; obligations on “nearby” works Proprietary CTL , EULAs, TOSs Few rights Typical rights
Code of Federal Regulations, 2011 CFR
2011-04-01
... OF CLASS II GAMES § 547.7 What are the minimum technical hardware standards applicable to Class II... the game, and are specially manufactured or proprietary and not off-the-shelf, shall display a unique... outcome or integrity of any game, progressive award, financial instrument, cashless transaction, voucher...
Code of Federal Regulations, 2012 CFR
2012-04-01
... OF CLASS II GAMES § 547.7 What are the minimum technical hardware standards applicable to Class II... the game, and are specially manufactured or proprietary and not off-the-shelf, shall display a unique... outcome or integrity of any game, progressive award, financial instrument, cashless transaction, voucher...
Code of Federal Regulations, 2010 CFR
2010-04-01
... OF CLASS II GAMES § 547.7 What are the minimum technical hardware standards applicable to Class II... the game, and are specially manufactured or proprietary and not off-the-shelf, shall display a unique... outcome or integrity of any game, progressive award, financial instrument, cashless transaction, voucher...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-17
... book data for the NASDAQ Market Center Execution System. NASDAQ has also implemented these capped/flat..., there is no economic basis for regulating maximum prices for one of the joint products in an industry in... publishing proprietary book data on the Internet. Second, because a single order or transaction report can...
Quality in the Basic Grant Delivery System: Volume 3, Methodology.
ERIC Educational Resources Information Center
Advanced Technology, Inc., McLean, VA.
The research methodology of a study to assess 1980-1981 award accuracy of the Basic Educational Opportunity Grants (BEOG), or Pell grants, is described. The study is the first stage of a three-stage quality control project. During the spring of 1981 a nationally representative sample of 305 public, private, and proprietary institutions was…
ERIC Educational Resources Information Center
Burke, Raymond V.; Andersen, Melissa N.; Bowen, Scott L.; Howard, Monica R.; Allen, Keith D.
2010-01-01
We evaluated the efficacy of a vocational training program including behavioral skills training, and a "performance cue system" (i.e., a proprietary iPhone application adapted for the study) to teach targeted social-vocational skills to six young adults with an Autism Spectrum Disorder. In two separate studies, participants were employed…
Characteristics and Application Analysis of Traditional Chinese Medicine Containing Sophora Japonica
NASA Astrophysics Data System (ADS)
Wei, Zhenzhen; Feng, Suxiang; Fang, Xiaoyan; Miao, Mingsan
2018-01-01
Purposes: To sum up the characteristics of Chinese medicine with Sophora Japonica and provide reference for the research, development and utilization of the Chinese medicine of Sophora japonica in the future. Methods: The author sums up the forms, functions, indications, usage, dosage and contraindications of the proprietary Chinese medicine containing Sophora Japonica in the Chinese Pharmacopoeia and the Ministerial standards. In addition, we will inquire about the clinical application of proprietary Chinese medicine containing Sophora japonica in the China National Knowledge Infrastructure (CNKI). Results: The proprietary Chinese medicine containing Sophora Japonica was widely used in the treatment of various diseases in clinic, but it was taken orally and without any external use of Chinese patent medicine. Moreover, in most of the proprietary Chinese medicine, Sophora japonica was used as a supplement; In addition, the causes of adverse reactions were not analyzed, and the safety of the drugs needed to be further analyzed. Conclusions: To make clear the role of Sophora japonica in proprietary Chinese medicine, we can develop the Chinese medicine new dosage forms of Sophora japonica; The Chinese medicine is made up of a variety of single herbs, some are toxic drugs, when an adverse reaction occurs, We should analyze the specific causes and avoid the occurrence of adverse reactions. In addition, Sophora japonica is a traditional herbal medicine and food in China; we can expand the application in other areas and explore the pharmacological and toxicological pathology.
A PEMFC hybrid electric vehicle real time control system
NASA Astrophysics Data System (ADS)
Sun, Hongqiao
In recent years, environmental friendly technologies and alternative energy solutions have drawn a lot of public attentions due to global energy crisis and pollution issues. Fuel cell (FC), a technology invented almost at the same time as the internal combustion (IC) engine, is now the focus of the automotive industry again. The fuel cell vehicle (FCV) has zero emission and its efficiency is significantly higher than the conventional IC engine power vehicles. Among a variety of FCV technologies, proton exchange membrane (PEM) FC vehicle appears to be far more attractive and mature. The prototype PEMFC vehicle has been developed and demonstrated to the public by nearly all the major automotive manufacturers in recent years. However, to the interest of the public research, publications and documentations on the PEMFC vehicle technology are rarely available due to its proprietary nature, which essentially makes it a secured technology. This dissertation demonstrates a real world application of a PEMFC hybrid electric vehicle. Through presenting the vehicle design concept, developing the real time control system and generating generic operation principles, this dissertation targets at establishing the public knowledge base on this new technology. A complete PEMFC hybrid electric vehicle design, including vehicle components layout, process flow diagram, real time control system architecture, subsystem structures and control algorithms, is presented in order to help understand the whole vehicle system. The design concept is validated through the vehicle demonstration. Generic operating principles are established along with the validation process, which helps populate this emerging technology. Thereafter, further improvements and future research directions are discussed.
Sieverding, Maia; Liu, Jenny; Beyeler, Naomi
2015-10-01
The social and institutional environments in which informal healthcare providers operate shape their health and business practices, particularly in contexts where regulatory enforcement is weak. In this study, we adopt a social capital perspective to understanding the social networks on which proprietary and patent medicine vendors (PPMVs) in Nigeria rely for support in the operation of their shops. Data are drawn from 70 in-depth interviews with PPMVs in three states, including interviews with local leaders of the PPMV professional association. We find that PPMVs primarily relied on more senior colleagues and formal healthcare professionals for informational support, including information about new medicines and advice on how to treat specific cases of illness. For instrumental support, including finance, start-up assistance, and intervention with regulatory agencies, PPMVs relied on extended family, the PPMVs with whom they apprenticed, and the leaders of their professional association. PPMVs' networks also provided continual reinforcement of what constitutes good PPMV practice through admonishments to follow scope of practice limitations. These informal reminders, as well as monitoring activities conducted by the professional association, served to reinforce PPMVs' concern with avoiding negative customer health outcomes, which were perceived to be detrimental to their business reputations. That PPMVs' networks both encouraged practices to reduce the likelihood of poor health outcomes, and provided advice regarding customers' health conditions, highlights the potential impact of informal providers' access to different forms of social capital on their delivery of health services, as well as their success as microenterprises. Copyright © 2015 Elsevier Ltd. All rights reserved.
Development of an inpatient operational pharmacy productivity model.
Naseman, Ryan W; Lopez, Ben R; Forrey, Ryan A; Weber, Robert J; Kipp, Kris M
2015-02-01
An innovative model for measuring the operational productivity of medication order management in inpatient settings is described. Order verification within a computerized prescriber order-entry system was chosen as the pharmacy workload driver. To account for inherent variability in the tasks involved in processing different types of orders, pharmaceutical products were grouped by class, and each class was assigned a time standard, or "medication complexity weight" reflecting the intensity of pharmacist and technician activities (verification of drug indication, verification of appropriate dosing, adverse-event prevention and monitoring, medication preparation, product checking, product delivery, returns processing, nurse/provider education, and problem-order resolution). The resulting "weighted verifications" (WV) model allows productivity monitoring by job function (pharmacist versus technician) to guide hiring and staffing decisions. A 9-month historical sample of verified medication orders was analyzed using the WV model, and the calculations were compared with values derived from two established models—one based on the Case Mix Index (CMI) and the other based on the proprietary Pharmacy Intensity Score (PIS). Evaluation of Pearson correlation coefficients indicated that values calculated using the WV model were highly correlated with those derived from the CMI-and PIS-based models (r = 0.845 and 0.886, respectively). Relative to the comparator models, the WV model offered the advantage of less period-to-period variability. The WV model yielded productivity data that correlated closely with values calculated using two validated workload management models. The model may be used as an alternative measure of pharmacy operational productivity. Copyright © 2015 by the American Society of Health-System Pharmacists, Inc. All rights reserved.
NASA Technical Reports Server (NTRS)
Hebert, Phillip W., Sr.; Hughes, Mark S.; Davis, Dawn M.; Turowski, Mark P.; Holladay, Wendy T.; Marshall, PeggL.; Duncan, Michael E.; Morris, Jon A.; Franzl, Richard W.
2012-01-01
The advent of the commercial space launch industry and NASA's more recent resumption of operation of Stennis Space Center's large test facilities after thirty years of contractor control resulted in a need for a non-proprietary data acquisition system (DAS) software to support government and commercial testing. The software is designed for modularity and adaptability to minimize the software development effort for current and future data systems. An additional benefit of the software's architecture is its ability to easily migrate to other testing facilities thus providing future commonality across Stennis. Adapting the software to other Rocket Propulsion Test (RPT) Centers such as MSFC, White Sands, and Plumbrook Station would provide additional commonality and help reduce testing costs for NASA. Ultimately, the software provides the government with unlimited rights and guarantees privacy of data to commercial entities. The project engaged all RPT Centers and NASA's Independent Verification & Validation facility to enhance product quality. The design consists of a translation layer which provides the transparency of the software application layers to underlying hardware regardless of test facility location and a flexible and easily accessible database. This presentation addresses system technical design, issues encountered, and the status of Stennis' development and deployment.
Microarray platform affords improved product analysis in mammalian cell growth studies
Li, Lingyun; Migliore, Nicole; Schaefer, Eugene; Sharfstein, Susan T.; Dordick, Jonathan S.; Linhardt, Robert J.
2014-01-01
High throughput (HT) platforms serve as cost-efficient and rapid screening method for evaluating the effect of cell culture conditions and screening of chemicals. The aim of the current study was to develop a high-throughput cell-based microarray platform to assess the effect of culture conditions on Chinese hamster ovary (CHO) cells. Specifically, growth, transgene expression and metabolism of a GS/MSX CHO cell line, which produces a therapeutic monoclonal antibody, was examined using microarray system in conjunction with conventional shake flask platform in a non-proprietary medium. The microarray system consists of 60 nl spots of cells encapsulated in alginate and separated in groups via an 8-well chamber system attached to the chip. Results show the non-proprietary medium developed allows cell growth, production and normal glycosylation of recombinant antibody and metabolism of the recombinant CHO cells in both the microarray and shake flask platforms. In addition, 10.3 mM glutamate addition to the defined base media results in lactate metabolism shift in the recombinant GS/MSX CHO cells in the shake flask platform. Ultimately, the results demonstrate that the high-throughput microarray platform has the potential to be utilized for evaluating the impact of media additives on cellular processes, such as, cell growth, metabolism and productivity. PMID:24227746
Database Migration for Command and Control
2002-11-01
Sql - proprietary JDP Private Area Air defense data Defended asset list Oracle 7.3.2 - Automated process (OLTP...TADIL warnings Oracle 7.3.2 Flat File - Discrete transaction with data upds - NRT response required Pull mission data Std SQL ...level execution data Oracle 7.3 User update External interfaces Auto/manual backup Messaging Proprietary replication (internally) SQL Web server
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-23
... Principal. \\6\\ The Series 23 is designed to test a candidate's knowledge of the rules and statutory... Series 9/10 examination. CBOE is proposing to limit the time period for which an automatic waiver of the... category are in parentheses): PT--Proprietary Trader (Series 56), CT-- Proprietary Trader Compliance...
34 CFR Appendix A to Subpart L of... - Ratio Methodology for Proprietary Institutions
Code of Federal Regulations, 2010 CFR
2010-07-01
... Financial Responsibility Pt. 668, Subpt. L, App. A Appendix A to Subpart L of Part 668—Ratio Methodology for... 34 Education 3 2010-07-01 2010-07-01 false Ratio Methodology for Proprietary Institutions A Appendix A to Subpart L of Part 668 Education Regulations of the Offices of the Department of Education...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-13
... Proposed Rule Change 1. Purpose Currently, the Exchange aggregates all of an ATP Holder's volume at the trading permit level for purposes of the Firm Proprietary Manual tiers. Recently, certain ATP Holders have... this filing, the Exchange proposes to allow its ATP Holders to elect to have their Firm Proprietary...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-02-08
...] Guidance for Industry on the Contents of a Complete Submission for the Evaluation of Proprietary Names... Administration (FDA) is announcing the availability of a guidance for industry entitled ``Contents of a Complete.... Background FDA is announcing the availability of a guidance for industry entitled ``Contents of a Complete...
Growth of the Proprietary Sector in Social Welfare: A Challenge to the Social Policy Curriculum.
ERIC Educational Resources Information Center
Ortiz, Elizabeth T.
The rapid growth of the proprietary sector in the provision of social services traditionally administered under non-profit or government auspices creates a problem and challenge for teachers of social policy. Instructors need to interpret this new trend, without much literature support, to a group of students with increasing potential for…