Full-Scale Wind-Tunnel Investigation of Wing-Cooling Ducts Effects of Propeller Slipstream, Special Report

NASA Technical Reports Server (NTRS)

Nickle, F. R.; Freeman, Arthur B.

1939-01-01

The safety of remotely operated vehicles depends on the correctness of the distributed protocol that facilitates the communication between the vehicle and the operator. A failure in this communication can result in catastrophic loss of the vehicle. To complicate matters, the communication system may be required to satisfy several, possibly conflicting, requirements. The design of protocols is typically an informal process based on successive iterations of a prototype implementation. Yet distributed protocols are notoriously difficult to get correct using such informal techniques. We present a formal specification of the design of a distributed protocol intended for use in a remotely operated vehicle, which is built from the composition of several simpler protocols. We demonstrate proof strategies that allow us to prove properties of each component protocol individually while ensuring that the property is preserved in the composition forming the entire system. Given that designs are likely to evolve as additional requirements emerge, we show how we have automated most of the repetitive proof steps to enable verification of rapidly changing designs.

Gateway design specification for fiber optic local area networks

NASA Technical Reports Server (NTRS)

1985-01-01

This is a Design Specification for a gateway to interconnect fiber optic local area networks (LAN's). The internetworking protocols for a gateway device that will interconnect multiple local area networks are defined. This specification serves as input for preparation of detailed design specifications for the hardware and software of a gateway device. General characteristics to be incorporated in the gateway such as node address mapping, packet fragmentation, and gateway routing features are described.

Variability in Criteria for Emergency Medical Services Routing of Acute Stroke Patients to Designated Stroke Center Hospitals.

PubMed

Dimitrov, Nikolay; Koenig, William; Bosson, Nichole; Song, Sarah; Saver, Jeffrey L; Mack, William J; Sanossian, Nerses

2015-09-01

Comprehensive stroke systems of care include routing to the nearest designated stroke center hospital, bypassing non-designated hospitals. Routing protocols are implemented at the state or county level and vary in qualification criteria and determination of destination hospital. We surveyed all counties in the state of California for presence and characteristics of their prehospital stroke routing protocols. Each county's local emergency medical services agency (LEMSA) was queried for the presence of a stroke routing protocol. We reviewed these protocols for method of stroke identification and criteria for patient transport to a stroke center. Thirty-three LEMSAs serve 58 counties in California with populations ranging from 1,175 to nearly 10 million. Fifteen LEMSAs (45%) had stroke routing protocols, covering 23 counties (40%) and 68% of the state population. Counties with protocols had higher population density (1,500 vs. 140 persons per square mile). In the six counties without designated stroke centers, patients meeting criteria were transported out of county. Stroke identification in the field was achieved using the Cincinnati Prehospital Stroke Screen in 72%, Los Angeles Prehospital Stroke Screen in 7% and a county-specific protocol in 22%. California EMS prehospital acute stroke routing protocols cover 68% of the state population and vary in characteristics including activation by symptom onset time and destination facility features, reflecting matching of system design to local geographic resources.

The use of participant-observation protocol in an industrial engineering research.

PubMed

Silveira e Silva, Renato da; Sznelwar, Laerte Idal; D'Afonseca e Silva, Victor

2012-01-01

Based on literature, this article aims to present the "participant-observation' research protocol, and its practical application in the industrial engineering field, more specifically within the area of design development, and in the case shown by this article, of interiors' design. The main target is to identify the concept of the method, i.e., from its characteristics to structure a general sense about the subject, so that the protocol can be used in different areas of knowledge, especially those ones which are committed with the scientific research involving the expertise from researchers, and subjective feelings and opinions of the users of an engineering product, and how this knowledge can be benefic for product design, contributing since the earliest stage of design.

SPAR: a security- and power-aware routing protocol for wireless ad hoc and sensor networks

NASA Astrophysics Data System (ADS)

Oberoi, Vikram; Chigan, Chunxiao

2005-05-01

Wireless Ad Hoc and Sensor Networks (WAHSNs) are vulnerable to extensive attacks as well as severe resource constraints. To fulfill the security needs, many security enhancements have been proposed. Like wise, from resource constraint perspective, many power aware schemes have been proposed to save the battery power. However, we observe that for the severely resource limited and extremely vulnerable WAHSNs, taking security or power (or any other resource) alone into consideration for protocol design is rather inadequate toward the truly "secure-and-useful" WAHSNs. For example, from resource constraint perspective, we identify one of the potential problems, the Security-Capable-Congestion (SCC) behavior, for the WAHSNs routing protocols where only the security are concerned. On the other hand, the design approach where only scarce resource is concerned, such as many power-aware WAHSNs protocols, leaves security unconsidered and is undesirable to many WAHSNs application scenarios. Motivated by these observations, we propose a co-design approach, where both the high security and effective resource consumption are targeted for WAHSNs protocol design. Specifically, we propose a novel routing protocol, Security- and Power- Aware Routing (SPAR) protocol based on this co-design approach. In SPAR, the routing decisions are made based on both security and power as routing criteria. The idea of the SPAR mechanism is routing protocol independent and therefore can be broadly integrated into any of the existing WAHSNs routing protocols. The simulation results show that SPAR outperforms the WAHSNs routing protocols where security or power alone is considered, significantly. This research finding demonstrates the proposed security- and resource- aware co-design approach is promising towards the truly "secure-and-useful" WAHSNs.

40 CFR 59.208 - Charcoal lighter material testing protocol.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the performance, design, and operation specifications of the prescribed equipment. A demonstration... Administrator prior to compliance testing, based on an evaluation of comparative performance specifications and... stack barbecue charcoal that is designed to be lit without the packaging, the same as in paragraph (h)(1...

40 CFR 59.208 - Charcoal lighter material testing protocol.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the performance, design, and operation specifications of the prescribed equipment. A demonstration... Administrator prior to compliance testing, based on an evaluation of comparative performance specifications and... stack barbecue charcoal that is designed to be lit without the packaging, the same as in paragraph (h)(1...

40 CFR 59.208 - Charcoal lighter material testing protocol.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the performance, design, and operation specifications of the prescribed equipment. A demonstration... Administrator prior to compliance testing, based on an evaluation of comparative performance specifications and... stack barbecue charcoal that is designed to be lit without the packaging, the same as in paragraph (h)(1...

Network protocols for real-time applications

NASA Technical Reports Server (NTRS)

Johnson, Marjory J.

1987-01-01

The Fiber Distributed Data Interface (FDDI) and the SAE AE-9B High Speed Ring Bus (HSRB) are emerging standards for high-performance token ring local area networks. FDDI was designed to be a general-purpose high-performance network. HSRB was designed specifically for military real-time applications. A workshop was conducted at NASA Ames Research Center in January, 1987 to compare and contrast these protocols with respect to their ability to support real-time applications. This report summarizes workshop presentations and includes an independent comparison of the two protocols. A conclusion reached at the workshop was that current protocols for the upper layers of the Open Systems Interconnection (OSI) network model are inadequate for real-time applications.

Web-accessible molecular modeling with Rosetta: The Rosetta Online Server that Includes Everyone (ROSIE).

PubMed

Moretti, Rocco; Lyskov, Sergey; Das, Rhiju; Meiler, Jens; Gray, Jeffrey J

2018-01-01

The Rosetta molecular modeling software package provides a large number of experimentally validated tools for modeling and designing proteins, nucleic acids, and other biopolymers, with new protocols being added continually. While freely available to academic users, external usage is limited by the need for expertise in the Unix command line environment. To make Rosetta protocols available to a wider audience, we previously created a web server called Rosetta Online Server that Includes Everyone (ROSIE), which provides a common environment for hosting web-accessible Rosetta protocols. Here we describe a simplification of the ROSIE protocol specification format, one that permits easier implementation of Rosetta protocols. Whereas the previous format required creating multiple separate files in different locations, the new format allows specification of the protocol in a single file. This new, simplified protocol specification has more than doubled the number of Rosetta protocols available under ROSIE. These new applications include pK a determination, lipid accessibility calculation, ribonucleic acid redesign, protein-protein docking, protein-small molecule docking, symmetric docking, antibody docking, cyclic toxin docking, critical binding peptide determination, and mapping small molecule binding sites. ROSIE is freely available to academic users at http://rosie.rosettacommons.org. © 2017 The Protein Society.

Defense in Depth Added to Malicious Activities Simulation Tools (MAST)

DTIC Science & Technology

2015-09-01

cipher suites. The TLS Handshake is a combination of three components: handshake, change cipher spec, and alert. 41 (1) The Handshake ( Hello ) The...TLS Handshake, specifically the “ Hello ” portion, is designed to negotiate session parameters (cipher suite). The client informs the server of the...protocols and standards that it supports and then the server selects the highest common protocols and standards. Specifically, the Client Hello message

Test Protocol for Room-to-Room Distribution of Outside Air by Residential Ventilation Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barley, C. D.; Anderson, R.; Hendron, B.

2007-12-01

This test and analysis protocol has been developed as a practical approach for measuring outside air distribution in homes. It has been used successfully in field tests and has led to significant insights on ventilation design issues. Performance advantages of more sophisticated ventilation systems over simpler, less-costly designs have been verified, and specific problems, such as airflow short-circuiting, have been identified.

Gender-Specific Combination HIV Prevention for Youth in High-Burden Settings: The MP3 Youth Observational Pilot Study Protocol

PubMed Central

Agot, Kawango

2017-01-01

Background Nearly three decades into the epidemic, sub-Saharan Africa (SSA) remains the region most heavily affected by human immunodeficiency virus (HIV), with nearly 70% of the 34 million people living with HIV globally residing in the region. In SSA, female and male youth (15 to 24 years) are at a disproportionately high risk of HIV infection compared to adults. As such, there is a need to target HIV prevention strategies to youth and to tailor them to a gender-specific context. This protocol describes the process for the multi-staged approach in the design of the MP3 Youth pilot study, a gender-specific, combination, HIV prevention intervention for youth in Kenya. Objective The objective of this multi-method protocol is to outline a rigorous and replicable methodology for a gender-specific combination HIV prevention pilot study for youth in high-burden settings, illustrating the triangulated methods undertaken to ensure that age, sex, and context are integral in the design of the intervention. Methods The mixed-methods, cross-sectional, longitudinal cohort pilot study protocol was developed by first conducting a systematic review of the literature, which shaped focus group discussions around prevention package and delivery options, and that also informed age- and sex- stratified mathematical modeling. The review, qualitative data, and mathematical modeling created a triangulated evidence base of interventions to be included in the pilot study protocol. To design the pilot study protocol, we convened an expert panel to select HIV prevention interventions effective for youth in SSA, which will be offered in a mobile health setting. The goal of the pilot study implementation and evaluation is to apply lessons learned to more effective HIV prevention evidence and programming. Results The combination HIV prevention package in this protocol includes (1) offering HIV testing and counseling for all youth; (2) voluntary medical circumcision and condoms for males; (3) pre-exposure prophylaxis (PrEP), conditional cash transfer (CCT), and contraceptives for females; and (4) referrals for HIV care among those identified as HIV-positive. The combination package platform selected is mobile health teams in an integrated services delivery model. A cross-sectional analysis will be conducted to determine the uptake of the interventions. To determine long-term impact, the protocol outlines enrolling selected participants in mutually exclusive longitudinal cohorts (HIV-positive, PrEP, CCT, and HIV-negative) followed by using mobile phone text messages (short message service, SMS) and in-person surveys to prospectively assess prevention method uptake, adherence, and risk compensation behaviors. Cross-sectional and sub-cohort analyses will be conducted to determine intervention packages uptake. Conclusions The literature review, focus groups, and modeling indicate that offering age- and gender- specific combination HIV prevention interventions that include biomedical, behavioral, and structural interventions can have an impact on HIV risk reduction. Implementing this protocol will show the feasibility of delivering these services at scale. The MP3 Youth study is one of the few combination HIV prevention intervention protocols incorporating youth- and gender-specific interventions in one delivery setting. Lessons learned from the design of the protocol can be incorporated into the national guidance for combination HIV prevention for youth in Kenya and other high-burden SSA settings. Trial Registration ClinicalTrials.gov NCT01571128; http://clinicaltrials.gov/ct2/show/NCT01571128?term=MP3+youth&rank=1 (Archived by WebCite at http://www.webcitation.org/6nmioPd54) PMID:28274904

SU-F-R-11: Designing Quality and Safety Informatics Through Implementation of a CT Radiation Dose Monitoring Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, JM; Samei, E; Departments of Physics, Electrical and Computer Engineering, and Biomedical Engineering, and Medical Physics Graduate Program, Duke University, Durham, NC

2016-06-15

Purpose: Recent legislative and accreditation requirements have driven rapid development and implementation of CT radiation dose monitoring solutions. Institutions must determine how to improve quality, safety, and consistency of their clinical performance. The purpose of this work was to design a strategy and meaningful characterization of results from an in-house, clinically-deployed dose monitoring solution. Methods: A dose monitoring platform was designed by our imaging physics group that focused on extracting protocol parameters, dose metrics, and patient demographics and size. Compared to most commercial solutions, which focus on individual exam alerts and global thresholds, the program sought to characterize overall consistencymore » and targeted thresholds based on eight analytic interrogations. Those were based on explicit questions related to protocol application, national benchmarks, protocol and size-specific dose targets, operational consistency, outliers, temporal trends, intra-system variability, and consistent use of electronic protocols. Using historical data since the start of 2013, 95% and 99% intervals were used to establish yellow and amber parameterized dose alert thresholds, respectively, as a function of protocol, scanner, and size. Results: Quarterly reports have been generated for three hospitals for 3 quarters of 2015 totaling 27880, 28502, 30631 exams, respectively. Four adult and two pediatric protocols were higher than external institutional benchmarks. Four protocol dose levels were being inconsistently applied as a function of patient size. For the three hospitals, the minimum and maximum amber outlier percentages were [1.53%,2.28%], [0.76%,1.8%], [0.94%,1.17%], respectively. Compared with the electronic protocols, 10 protocols were found to be used with some inconsistency. Conclusion: Dose monitoring can satisfy requirements with global alert thresholds and patient dose records, but the real value is in optimizing patient-specific protocols, balancing image quality trade-offs that dose-reduction strategies promise, and improving the performance and consistency of a clinical operation. Data plots that capture patient demographics and scanner performance demonstrate that value.« less

Electronic protocol of respiratory physical therapy in patients with idiopathic adolescent scoliosis.

PubMed

Cano, Danila Vieira Baldini; Malafaia, Osvaldo; Alves, Vera Lúcia dos Santos; Avanzi, Osmar; Pinto, José Simão de Paula

2011-01-01

To create a clinical database of respiratory function in patients with adolescent idiopathic scoliosis; computerize and store this clinical data through the use of a software; incorporate this electronic protocol to the SINPE© (Integrated Electronic Protocols System) and analyze a pilot project with interpretation of results. From the literature review a computerized data bank of clinical data of postural deviations was set up (master protocol). Upon completion of the master protocol a specific protocol of respiratory function in patients with adolescent idiopathic scoliosis was designed and a pilot project was conducted to collect and analyze data from ten patients. It was possible to create the master protocol of postural deviations and the specific protocol of respiratory function in patients with adolescent idiopathic scoliosis. The data collected in the pilot project was processed by the SINPE ANALYZER©, generating charts and statistics. The establishment of the clinical database of adolescent idiopathic scoliosis was possible. Computerization and storage of clinical data using the software were viable. The electronic protocol of adolescent idiopathic scoliosis could be incorporated into the SINPE© and its use in the pilot project was successful.

The Development of a Design and Construction Process Protocol to Support the Home Modification Process Delivered by Occupational Therapists

PubMed Central

Ormerod, Marcus; Newton, Rita

2018-01-01

Modifying the home environments of older people as they age in place is a well-established health and social care intervention. Using design and construction methods to redress any imbalance caused by the ageing process or disability within the home environment, occupational therapists are seen as the experts in this field of practice. However, the process used by occupational therapists when modifying home environments has been criticised for being disorganised and not founded on theoretical principles and concepts underpinning the profession. To address this issue, research was conducted to develop a design and construction process protocol specifically for home modifications. A three-stage approach was taken for the analysis of qualitative data generated from an online survey, completed by 135 occupational therapists in the UK. Using both the existing occupational therapy intervention process model and the design and construction process protocol as the theoretical frameworks, a 4-phase, 9-subphase design and construction process protocol for home modifications was developed. Overall, the study is innovative in developing the first process protocol for home modifications, potentially providing occupational therapists with a systematic and effective approach to the design and delivery of home modification services for older and disabled people. PMID:29682348

The Development of a Design and Construction Process Protocol to Support the Home Modification Process Delivered by Occupational Therapists.

PubMed

Russell, Rachel; Ormerod, Marcus; Newton, Rita

2018-01-01

Modifying the home environments of older people as they age in place is a well-established health and social care intervention. Using design and construction methods to redress any imbalance caused by the ageing process or disability within the home environment, occupational therapists are seen as the experts in this field of practice. However, the process used by occupational therapists when modifying home environments has been criticised for being disorganised and not founded on theoretical principles and concepts underpinning the profession. To address this issue, research was conducted to develop a design and construction process protocol specifically for home modifications. A three-stage approach was taken for the analysis of qualitative data generated from an online survey, completed by 135 occupational therapists in the UK. Using both the existing occupational therapy intervention process model and the design and construction process protocol as the theoretical frameworks, a 4-phase, 9-subphase design and construction process protocol for home modifications was developed. Overall, the study is innovative in developing the first process protocol for home modifications, potentially providing occupational therapists with a systematic and effective approach to the design and delivery of home modification services for older and disabled people.

Cure Cycle Design Methodology for Fabricating Reactive Resin Matrix Fiber Reinforced Composites: A Protocol for Producing Void-free Quality Laminates

NASA Technical Reports Server (NTRS)

Hou, Tan-Hung

2014-01-01

For the fabrication of resin matrix fiber reinforced composite laminates, a workable cure cycle (i.e., temperature and pressure profiles as a function of processing time) is needed and is critical for achieving void-free laminate consolidation. Design of such a cure cycle is not trivial, especially when dealing with reactive matrix resins. An empirical "trial and error" approach has been used as common practice in the composite industry. Such an approach is not only costly, but also ineffective at establishing the optimal processing conditions for a specific resin/fiber composite system. In this report, a rational "processing science" based approach is established, and a universal cure cycle design protocol is proposed. Following this protocol, a workable and optimal cure cycle can be readily and rationally designed for most reactive resin systems in a cost effective way. This design protocol has been validated through experimental studies of several reactive polyimide composites for a wide spectrum of usage that has been documented in the previous publications.

Protocols for the Design of Kinase-focused Compound Libraries.

PubMed

Jacoby, Edgar; Wroblowski, Berthold; Buyck, Christophe; Neefs, Jean-Marc; Meyer, Christophe; Cummings, Maxwell D; van Vlijmen, Herman

2018-05-01

Protocols for the design of kinase-focused compound libraries are presented. Kinase-focused compound libraries can be differentiated based on the design goal. Depending on whether the library should be a discovery library specific for one particular kinase, a general discovery library for multiple distinct kinase projects, or even phenotypic screening, there exists today a variety of in silico methods to design candidate compound libraries. We address the following scenarios: 1) Datamining of SAR databases and kinase focused vendor catalogues; 2) Predictions and virtual screening; 3) Structure-based design of combinatorial kinase inhibitors; 4) Design of covalent kinase inhibitors; 5) Design of macrocyclic kinase inhibitors; and 6) Design of allosteric kinase inhibitors and activators. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Design and Implementation of a Secure Modbus Protocol

NASA Astrophysics Data System (ADS)

Fovino, Igor Nai; Carcano, Andrea; Masera, Marcelo; Trombetta, Alberto

The interconnectivity of modern and legacy supervisory control and data acquisition (SCADA) systems with corporate networks and the Internet has significantly increased the threats to critical infrastructure assets. Meanwhile, traditional IT security solutions such as firewalls, intrusion detection systems and antivirus software are relatively ineffective against attacks that specifically target vulnerabilities in SCADA protocols. This paper describes a secure version of the Modbus SCADA protocol that incorporates integrity, authentication, non-repudiation and anti-replay mechanisms. Experimental results using a power plant testbed indicate that the augmented protocol provides good security functionality without significant overhead.

Genetic Analysis and Species Specific Amplification of the Artemisinin Resistance-Associated Kelch Propeller Domain in P. falciparum and P. vivax

PubMed Central

Talundzic, Eldin; Chenet, Stella M.; Goldman, Ira F.; Patel, Dhruviben S.; Nelson, Julia A.; Plucinski, Mateusz M.; Barnwell, John W.; Udhayakumar, Venkatachalam

2015-01-01

Plasmodium falciparum resistance to artemisinin has emerged in the Greater Mekong Subregion and now poses a threat to malaria control and prevention. Recent work has identified mutations in the kelch propeller domain of the P. falciparum K13 gene to be associated artemisinin resistance as defined by delayed parasite clearance and ex vivo ring stage survival assays. Species specific primers for the two most prevalent human malaria species, P. falciparum and P. vivax, were designed and tested on multiple parasite isolates including human, rodent, and non- humans primate Plasmodium species. The new protocol described here using the species specific primers only amplified their respective species, P. falciparum and P. vivax, and did not cross react with any of the other human malaria Plasmodium species. We provide an improved species specific PCR and sequencing protocol that could be effectively used in areas where both P. falciparum and P. vivax are circulating. To design this improved protocol, the kelch gene was analyzed and compared among different species of Plasmodium. The kelch propeller domain was found to be highly conserved across the mammalian Plasmodium species. PMID:26292024

Genetic Analysis and Species Specific Amplification of the Artemisinin Resistance-Associated Kelch Propeller Domain in P. falciparum and P. vivax.

PubMed

Talundzic, Eldin; Chenet, Stella M; Goldman, Ira F; Patel, Dhruviben S; Nelson, Julia A; Plucinski, Mateusz M; Barnwell, John W; Udhayakumar, Venkatachalam

2015-01-01

Plasmodium falciparum resistance to artemisinin has emerged in the Greater Mekong Subregion and now poses a threat to malaria control and prevention. Recent work has identified mutations in the kelch propeller domain of the P. falciparum K13 gene to be associated artemisinin resistance as defined by delayed parasite clearance and ex vivo ring stage survival assays. Species specific primers for the two most prevalent human malaria species, P. falciparum and P. vivax, were designed and tested on multiple parasite isolates including human, rodent, and non- humans primate Plasmodium species. The new protocol described here using the species specific primers only amplified their respective species, P. falciparum and P. vivax, and did not cross react with any of the other human malaria Plasmodium species. We provide an improved species specific PCR and sequencing protocol that could be effectively used in areas where both P. falciparum and P. vivax are circulating. To design this improved protocol, the kelch gene was analyzed and compared among different species of Plasmodium. The kelch propeller domain was found to be highly conserved across the mammalian Plasmodium species.

Development of PCR protocols for specific identification of Clostridium spiroforme and detection of sas and sbs genes.

PubMed

Drigo, Ilenia; Bacchin, Cosetta; Cocchi, Monia; Bano, Luca; Agnoletti, Fabrizio

2008-10-15

Rabbit diarrhoea caused by toxigenic Clostridium spiroforme is responsible for significant losses in commercial rabbitries but the accurate identification of this micro-organism is difficult due to the absence of both a commercial biochemical panel and biomolecular methods. The aim of this study was therefore to develop PCR protocols for specific detection of C. spiroforme and its binary toxin encoding genes. The C. spiroforme specie-specific primers were designed based on its 16S rDNA published sequences and the specificity of these primers was tested with DNA extracted from closely related Clostridium species. The sa/bs_F and sa/bs _R C. spiroforme binary toxin specific primers were designed to be complementary, respectively, to a sequence of 21 bases on the 3' and of sas gene and on the 5' of the sbs gene. The detection limits of in house developed PCR protocols were 25CFU/ml of bacterial suspension and 1.38x10(4)CFU/g of caecal content for specie-specific primers and 80CFU/ml of bacterial suspension and 2.8x10(4)CFU/g of caecal content in case of sa/bs primers. These results indicated that the described PCR assays enable specific identification of C. spiroforme and its binary toxin genes and can therefore be considered a rapid, reliable tool for the diagnosis of C. spiroforme-related enterotoxaemia.

Gender-Specific Combination HIV Prevention for Youth in High-Burden Settings: The MP3 Youth Observational Pilot Study Protocol.

PubMed

Buttolph, Jasmine; Inwani, Irene; Agot, Kawango; Cleland, Charles M; Cherutich, Peter; Kiarie, James N; Osoti, Alfred; Celum, Connie L; Baeten, Jared M; Nduati, Ruth; Kinuthia, John; Hallett, Timothy B; Alsallaq, Ramzi; Kurth, Ann E

2017-03-08

Nearly three decades into the epidemic, sub-Saharan Africa (SSA) remains the region most heavily affected by human immunodeficiency virus (HIV), with nearly 70% of the 34 million people living with HIV globally residing in the region. In SSA, female and male youth (15 to 24 years) are at a disproportionately high risk of HIV infection compared to adults. As such, there is a need to target HIV prevention strategies to youth and to tailor them to a gender-specific context. This protocol describes the process for the multi-staged approach in the design of the MP3 Youth pilot study, a gender-specific, combination, HIV prevention intervention for youth in Kenya. The objective of this multi-method protocol is to outline a rigorous and replicable methodology for a gender-specific combination HIV prevention pilot study for youth in high-burden settings, illustrating the triangulated methods undertaken to ensure that age, sex, and context are integral in the design of the intervention. The mixed-methods, cross-sectional, longitudinal cohort pilot study protocol was developed by first conducting a systematic review of the literature, which shaped focus group discussions around prevention package and delivery options, and that also informed age- and sex- stratified mathematical modeling. The review, qualitative data, and mathematical modeling created a triangulated evidence base of interventions to be included in the pilot study protocol. To design the pilot study protocol, we convened an expert panel to select HIV prevention interventions effective for youth in SSA, which will be offered in a mobile health setting. The goal of the pilot study implementation and evaluation is to apply lessons learned to more effective HIV prevention evidence and programming. The combination HIV prevention package in this protocol includes (1) offering HIV testing and counseling for all youth; (2) voluntary medical circumcision and condoms for males; (3) pre-exposure prophylaxis (PrEP), conditional cash transfer (CCT), and contraceptives for females; and (4) referrals for HIV care among those identified as HIV-positive. The combination package platform selected is mobile health teams in an integrated services delivery model. A cross-sectional analysis will be conducted to determine the uptake of the interventions. To determine long-term impact, the protocol outlines enrolling selected participants in mutually exclusive longitudinal cohorts (HIV-positive, PrEP, CCT, and HIV-negative) followed by using mobile phone text messages (short message service, SMS) and in-person surveys to prospectively assess prevention method uptake, adherence, and risk compensation behaviors. Cross-sectional and sub-cohort analyses will be conducted to determine intervention packages uptake. The literature review, focus groups, and modeling indicate that offering age- and gender- specific combination HIV prevention interventions that include biomedical, behavioral, and structural interventions can have an impact on HIV risk reduction. Implementing this protocol will show the feasibility of delivering these services at scale. The MP3 Youth study is one of the few combination HIV prevention intervention protocols incorporating youth- and gender-specific interventions in one delivery setting. Lessons learned from the design of the protocol can be incorporated into the national guidance for combination HIV prevention for youth in Kenya and other high-burden SSA settings. ClinicalTrials.gov NCT01571128; http://clinicaltrials.gov/ct2/show/NCT01571128?term=MP3+youth&rank=1 (Archived by WebCite at http://www.webcitation.org/6nmioPd54). ©Jasmine Buttolph, Irene Inwani, Kawango Agot, Charles M Cleland, Peter Cherutich, James N Kiarie, Alfred Osoti, Connie L Celum, Jared M Baeten, Ruth Nduati, John Kinuthia, Timothy B Hallett, Ramzi Alsallaq, Ann E Kurth. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 08.03.2017.

Experimental high-speed network

NASA Astrophysics Data System (ADS)

McNeill, Kevin M.; Klein, William P.; Vercillo, Richard; Alsafadi, Yasser H.; Parra, Miguel V.; Dallas, William J.

1993-09-01

Many existing local area networking protocols currently applied in medical imaging were originally designed for relatively low-speed, low-volume networking. These protocols utilize small packet sizes appropriate for text based communication. Local area networks of this type typically provide raw bandwidth under 125 MHz. These older network technologies are not optimized for the low delay, high data traffic environment of a totally digital radiology department. Some current implementations use point-to-point links when greater bandwidth is required. However, the use of point-to-point communications for a total digital radiology department network presents many disadvantages. This paper describes work on an experimental multi-access local area network called XFT. The work includes the protocol specification, and the design and implementation of network interface hardware and software. The protocol specifies the Physical and Data Link layers (OSI layers 1 & 2) for a fiber-optic based token ring providing a raw bandwidth of 500 MHz. The protocol design and implementation of the XFT interface hardware includes many features to optimize image transfer and provide flexibility for additional future enhancements which include: a modular hardware design supporting easy portability to a variety of host system buses, a versatile message buffer design providing 16 MB of memory, and the capability to extend the raw bandwidth of the network to 3.0 GHz.

A Range Finding Protocol to Support Design for Transcriptomics Experimentation: Examples of In-Vitro and In-Vivo Murine UV Exposure

PubMed Central

van Oostrom, Conny T.; Jonker, Martijs J.; de Jong, Mark; Dekker, Rob J.; Rauwerda, Han; Ensink, Wim A.; de Vries, Annemieke; Breit, Timo M.

2014-01-01

In transcriptomics research, design for experimentation by carefully considering biological, technological, practical and statistical aspects is very important, because the experimental design space is essentially limitless. Usually, the ranges of variable biological parameters of the design space are based on common practices and in turn on phenotypic endpoints. However, specific sub-cellular processes might only be partially reflected by phenotypic endpoints or outside the associated parameter range. Here, we provide a generic protocol for range finding in design for transcriptomics experimentation based on small-scale gene-expression experiments to help in the search for the right location in the design space by analyzing the activity of already known genes of relevant molecular mechanisms. Two examples illustrate the applicability: in-vitro UV-C exposure of mouse embryonic fibroblasts and in-vivo UV-B exposure of mouse skin. Our pragmatic approach is based on: framing a specific biological question and associated gene-set, performing a wide-ranged experiment without replication, eliminating potentially non-relevant genes, and determining the experimental ‘sweet spot’ by gene-set enrichment plus dose-response correlation analysis. Examination of many cellular processes that are related to UV response, such as DNA repair and cell-cycle arrest, revealed that basically each cellular (sub-) process is active at its own specific spot(s) in the experimental design space. Hence, the use of range finding, based on an affordable protocol like this, enables researchers to conveniently identify the ‘sweet spot’ for their cellular process of interest in an experimental design space and might have far-reaching implications for experimental standardization. PMID:24823911

Achieving sink node anonymity in tactical wireless sensor networks using a reactive routing protocol

DTIC Science & Technology

2017-06-01

transmit their information through the network based on the specific protocols that are implemented. Nodes may be designed to perform any combination of...band, and one channel in the 868-MHz band. The IEEE 802.15.4 standard is designed to provide Low-Rate Wireless Personal Area Network (LR-WPAN...MANETs and is currently a draft at the IETF Network Working Group [9]. It was derived from the Ad hoc On -Demand Distance Vector (AODV) routing

Chapter A10. Lakes and reservoirs: Guidelines for study design and sampling

USGS Publications Warehouse

Green, William R.; Robertson, Dale M.; Wilde, Franceska D.

2015-09-29

Within this chapter are references to other chapters of the NFM that provide more detailed guidelines related to specific topics and more detailed protocols for the quality assurance and assessment of the lake and reservoir data. Protocols and procedures to address and document the quality of lake and reservoir investigations are adapted from, or referenced to, the protocols and standard operating procedures contained in related chapters of this National Field Manual.

A PROTOCOL FOR DETERMINING WWF SETTLING VELOCITIES FOR TREATMENT PROCESS DESIGN ENHANCEMENT

EPA Science Inventory

Urban wet weather flows (WWF) contain a high proportion of suspended solids (SS) which must be rapidly reduced before release to receiving waters. Site specific, storm-event data evaluations for designing WWF-treatment facilities differs from dry-weather flow design. WWF-sett...

Heuristic Evaluation of E-Learning Courses: A Comparative Analysis of Two E-Learning Heuristic Sets

ERIC Educational Resources Information Center

Zaharias, Panagiotis; Koutsabasis, Panayiotis

2012-01-01

Purpose: The purpose of this paper is to discuss heuristic evaluation as a method for evaluating e-learning courses and applications and more specifically to investigate the applicability and empirical use of two customized e-learning heuristic protocols. Design/methodology/approach: Two representative e-learning heuristic protocols were chosen…

Design of MPPT Controller Monitoring Software Based on QT Framework

NASA Astrophysics Data System (ADS)

Meng, X. Z.; Lu, P. G.

2017-10-01

The MPPT controller was a hardware device for tracking the maximum power point of solar photovoltaic array. Multiple controllers could be working as networking mode by specific communicating protocol. In this article, based on C++ GUI programming with Qt frame, we designed one sort of desktop application for monitoring and analyzing operational parameter of MPPT controller. The type of communicating protocol for building network was Modbus protocol which using Remote Terminal Unit mode and The desktop application of host computer was connected with all the controllers in the network through RS485 communication or ZigBee wireless communication. Using this application, user could monitor the parameter of controller wherever they were by internet.

Molecular beacon-enabled purification of living cells by targeting cell type-specific mRNAs.

PubMed

Wile, Brian M; Ban, Kiwon; Yoon, Young-Sup; Bao, Gang

2014-10-01

Molecular beacons (MBs) are dual-labeled oligonucleotides that fluoresce only in the presence of complementary mRNA. The use of MBs to target specific mRNAs allows sorting of specific cells from a mixed cell population. In contrast to existing approaches that are limited by available surface markers or selectable metabolic characteristics, the MB-based method enables the isolation of a wide variety of cells. For example, the ability to purify specific cell types derived from pluripotent stem cells (PSCs) is important for basic research and therapeutics. In addition to providing a general protocol for MB design, validation and nucleofection into cells, we describe how to isolate a specific cell population from differentiating PSCs. By using this protocol, we have successfully isolated cardiomyocytes differentiated from mouse or human PSCs (hPSCs) with ∼ 97% purity, as confirmed by electrophysiology and immunocytochemistry. After designing MBs, their ordering and validation requires 2 weeks, and the isolation process requires 3 h.

System approach to distributed sensor management

NASA Astrophysics Data System (ADS)

Mayott, Gregory; Miller, Gordon; Harrell, John; Hepp, Jared; Self, Mid

2010-04-01

Since 2003, the US Army's RDECOM CERDEC Night Vision Electronic Sensor Directorate (NVESD) has been developing a distributed Sensor Management System (SMS) that utilizes a framework which demonstrates application layer, net-centric sensor management. The core principles of the design support distributed and dynamic discovery of sensing devices and processes through a multi-layered implementation. This results in a sensor management layer that acts as a System with defined interfaces for which the characteristics, parameters, and behaviors can be described. Within the framework, the definition of a protocol is required to establish the rules for how distributed sensors should operate. The protocol defines the behaviors, capabilities, and message structures needed to operate within the functional design boundaries. The protocol definition addresses the requirements for a device (sensors or processes) to dynamically join or leave a sensor network, dynamically describe device control and data capabilities, and allow dynamic addressing of publish and subscribe functionality. The message structure is a multi-tiered definition that identifies standard, extended, and payload representations that are specifically designed to accommodate the need for standard representations of common functions, while supporting the need for feature-based functions that are typically vendor specific. The dynamic qualities of the protocol enable a User GUI application the flexibility of mapping widget-level controls to each device based on reported capabilities in real-time. The SMS approach is designed to accommodate scalability and flexibility within a defined architecture. The distributed sensor management framework and its application to a tactical sensor network will be described in this paper.

Rapid Design of Knowledge-Based Scoring Potentials for Enrichment of Near-Native Geometries in Protein-Protein Docking.

PubMed

Sasse, Alexander; de Vries, Sjoerd J; Schindler, Christina E M; de Beauchêne, Isaure Chauvot; Zacharias, Martin

2017-01-01

Protein-protein docking protocols aim to predict the structures of protein-protein complexes based on the structure of individual partners. Docking protocols usually include several steps of sampling, clustering, refinement and re-scoring. The scoring step is one of the bottlenecks in the performance of many state-of-the-art protocols. The performance of scoring functions depends on the quality of the generated structures and its coupling to the sampling algorithm. A tool kit, GRADSCOPT (GRid Accelerated Directly SCoring OPTimizing), was designed to allow rapid development and optimization of different knowledge-based scoring potentials for specific objectives in protein-protein docking. Different atomistic and coarse-grained potentials can be created by a grid-accelerated directly scoring dependent Monte-Carlo annealing or by a linear regression optimization. We demonstrate that the scoring functions generated by our approach are similar to or even outperform state-of-the-art scoring functions for predicting near-native solutions. Of additional importance, we find that potentials specifically trained to identify the native bound complex perform rather poorly on identifying acceptable or medium quality (near-native) solutions. In contrast, atomistic long-range contact potentials can increase the average fraction of near-native poses by up to a factor 2.5 in the best scored 1% decoys (compared to existing scoring), emphasizing the need of specific docking potentials for different steps in the docking protocol.

Evaluation of Modified 2-Tiered Serodiagnostic Testing Algorithms for Early Lyme Disease

PubMed Central

Strle, Klemen; Nigrovic, Lise E.; Lantos, Paul M.; Lepore, Timothy J.; Damle, Nitin S.; Ferraro, Mary Jane; Steere, Allen C.

2017-01-01

Abstract Background. The conventional 2-tiered serologic testing protocol for Lyme disease (LD), an enzyme immunoassay (EIA) followed by immunoglobulin M and immunoglobulin G Western blots, performs well in late-stage LD but is insensitive in patients with erythema migrans (EM), the most common manifestation of the illness. Western blots are also complex, difficult to interpret, and relatively expensive. In an effort to improve test performance and simplify testing in early LD, we evaluated several modified 2-tiered testing (MTTT) protocols, which use 2 assays designed as first-tier tests sequentially, without the need of Western blots. Methods. The MTTT protocols included (1) a whole-cell sonicate (WCS) EIA followed by a C6 EIA; (2) a WCS EIA followed by a VlsE chemiluminescence immunoassay (CLIA); and (3) a variable major protein-like sequence, expressed (VlsE) CLIA followed by a C6 EIA. Sensitivity was determined using serum from 55 patients with erythema migrans; specificity was determined using serum from 50 patients with other illnesses and 1227 healthy subjects. Results. Sensitivity of the various MTTT protocols in patients with acute erythema migrans ranged from 36% (95% confidence interval [CI], 25%–50%) to 54% (95% CI, 42%–67%), compared with 25% (95% CI, 16%–38%) using the conventional protocol (P = .003–0.3). Among control subjects, the 3 MTTT protocols were similarly specific (99.3%–99.5%) compared with conventional 2-tiered testing (99.5% specificity; P = .6–1.0). Conclusions. Although there were minor differences in sensitivity and specificity among MTTT protocols, each provides comparable or greater sensitivity in acute EM, and similar specificity compared with conventional 2-tiered testing, obviating the need for Western blots. PMID:28329259

A kind of universal quantum secret sharing protocol

NASA Astrophysics Data System (ADS)

Chen, Xiu-Bo; Dou, Zhao; Xu, Gang; He, Xiao-Yu; Yang, Yi-Xian

2017-01-01

Universality is an important feature, but less researched in quantum communication protocols. In this paper, a kind of universal quantum secret sharing protocol is investigated. Firstly, we design a quantum secret sharing protocol based on the Borras-Plastino-Batle (BPB) state. Departing from previous research, our protocol has a salient feature in that participants in our protocol only need projective measurement instead of any unitary operations. It makes our protocol more flexible. Secondly, universality of quantum communication protocols is studied for the first time. More specifically, module division of quantum communication protocols and coupling between different modules are discussed. Our aforementioned protocol is analyzed as an example. On one hand, plenty of quantum states (the BPB-class states and the BPB-like-class states, which are proposed in this paper) could be used as carrier to perform our protocol. On the other hand, our protocol also could be regarded as a quantum private comparison protocol with a little revision. These features are rare for quantum communication protocols, and make our protocol more robust. Thirdly, entanglements of the BPB-class states are calculated in the Appendix.

A kind of universal quantum secret sharing protocol.

PubMed

Chen, Xiu-Bo; Dou, Zhao; Xu, Gang; He, Xiao-Yu; Yang, Yi-Xian

2017-01-12

Universality is an important feature, but less researched in quantum communication protocols. In this paper, a kind of universal quantum secret sharing protocol is investigated. Firstly, we design a quantum secret sharing protocol based on the Borras-Plastino-Batle (BPB) state. Departing from previous research, our protocol has a salient feature in that participants in our protocol only need projective measurement instead of any unitary operations. It makes our protocol more flexible. Secondly, universality of quantum communication protocols is studied for the first time. More specifically, module division of quantum communication protocols and coupling between different modules are discussed. Our aforementioned protocol is analyzed as an example. On one hand, plenty of quantum states (the BPB-class states and the BPB-like-class states, which are proposed in this paper) could be used as carrier to perform our protocol. On the other hand, our protocol also could be regarded as a quantum private comparison protocol with a little revision. These features are rare for quantum communication protocols, and make our protocol more robust. Thirdly, entanglements of the BPB-class states are calculated in the Appendix.

A kind of universal quantum secret sharing protocol

PubMed Central

Chen, Xiu-Bo; Dou, Zhao; Xu, Gang; He, Xiao-Yu; Yang, Yi-Xian

2017-01-01

Universality is an important feature, but less researched in quantum communication protocols. In this paper, a kind of universal quantum secret sharing protocol is investigated. Firstly, we design a quantum secret sharing protocol based on the Borras-Plastino-Batle (BPB) state. Departing from previous research, our protocol has a salient feature in that participants in our protocol only need projective measurement instead of any unitary operations. It makes our protocol more flexible. Secondly, universality of quantum communication protocols is studied for the first time. More specifically, module division of quantum communication protocols and coupling between different modules are discussed. Our aforementioned protocol is analyzed as an example. On one hand, plenty of quantum states (the BPB-class states and the BPB-like-class states, which are proposed in this paper) could be used as carrier to perform our protocol. On the other hand, our protocol also could be regarded as a quantum private comparison protocol with a little revision. These features are rare for quantum communication protocols, and make our protocol more robust. Thirdly, entanglements of the BPB-class states are calculated in the Appendix. PMID:28079109

Design and implementation of a high performance network security processor

NASA Astrophysics Data System (ADS)

Wang, Haixin; Bai, Guoqiang; Chen, Hongyi

2010-03-01

The last few years have seen many significant progresses in the field of application-specific processors. One example is network security processors (NSPs) that perform various cryptographic operations specified by network security protocols and help to offload the computation intensive burdens from network processors (NPs). This article presents a high performance NSP system architecture implementation intended for both internet protocol security (IPSec) and secure socket layer (SSL) protocol acceleration, which are widely employed in virtual private network (VPN) and e-commerce applications. The efficient dual one-way pipelined data transfer skeleton and optimised integration scheme of the heterogenous parallel crypto engine arrays lead to a Gbps rate NSP, which is programmable with domain specific descriptor-based instructions. The descriptor-based control flow fragments large data packets and distributes them to the crypto engine arrays, which fully utilises the parallel computation resources and improves the overall system data throughput. A prototyping platform for this NSP design is implemented with a Xilinx XC3S5000 based FPGA chip set. Results show that the design gives a peak throughput for the IPSec ESP tunnel mode of 2.85 Gbps with over 2100 full SSL handshakes per second at a clock rate of 95 MHz.

Compositional Verification of a Communication Protocol for a Remotely Operated Vehicle

NASA Technical Reports Server (NTRS)

Goodloe, Alwyn E.; Munoz, Cesar A.

2009-01-01

This paper presents the specification and verification in the Prototype Verification System (PVS) of a protocol intended to facilitate communication in an experimental remotely operated vehicle used by NASA researchers. The protocol is defined as a stack-layered com- position of simpler protocols. It can be seen as the vertical composition of protocol layers, where each layer performs input and output message processing, and the horizontal composition of different processes concurrently inhabiting the same layer, where each process satisfies a distinct requirement. It is formally proven that the protocol components satisfy certain delivery guarantees. Compositional techniques are used to prove these guarantees also hold in the composed system. Although the protocol itself is not novel, the methodology employed in its verification extends existing techniques by automating the tedious and usually cumbersome part of the proof, thereby making the iterative design process of protocols feasible.

Asynchronous Message Service Reference Implementation

NASA Technical Reports Server (NTRS)

Burleigh, Scott C.

2011-01-01

This software provides a library of middleware functions with a simple application programming interface, enabling implementation of distributed applications in conformance with the CCSDS AMS (Consultative Committee for Space Data Systems Asynchronous Message Service) specification. The AMS service, and its protocols, implement an architectural concept under which the modules of mission systems may be designed as if they were to operate in isolation, each one producing and consuming mission information without explicit awareness of which other modules are currently operating. Communication relationships among such modules are self-configuring; this tends to minimize complexity in the development and operations of modular data systems. A system built on this model is a society of generally autonomous, inter-operating modules that may fluctuate freely over time in response to changing mission objectives, modules functional upgrades, and recovery from individual module failure. The purpose of AMS, then, is to reduce mission cost and risk by providing standard, reusable infrastructure for the exchange of information among data system modules in a manner that is simple to use, highly automated, flexible, robust, scalable, and efficient. The implementation is designed to spawn multiple threads of AMS functionality under the control of an AMS application program. These threads enable all members of an AMS-based, distributed application to discover one another in real time, subscribe to messages on specific topics, and to publish messages on specific topics. The query/reply (client/server) communication model is also supported. Message exchange is optionally subject to encryption (to support confidentiality) and authorization. Fault tolerance measures in the discovery protocol minimize the likelihood of overall application failure due to any single operational error anywhere in the system. The multi-threaded design simplifies processing while enabling application nodes to operate at high speeds; linked lists protected by mutex semaphores and condition variables are used for efficient, inter-thread communication. Applications may use a variety of transport protocols underlying AMS itself, including TCP (Transmission Control Protocol), UDP (User Datagram Protocol), and message queues.

Designing Endocrine Disruption Out of the Next Generation of Chemicals

PubMed Central

Schug, T.T; Abagyan, R.; Blumberg, B.; Collins, T.J.; Crews, D.; DeFur, P.L.; Dickerson, S.M.; Edwards, T.M.; Gore, A.C.; Guillette, L.J.; Hayes, T.; Heindel, J.J.; Moores, A.; Patisaul, H.B.; Tal, T.L.; Thayer, K.A.; Vandenberg, L.N.; Warner, J.; Watson, C.S.; Saal, F.S. vom; Zoeller, R.T.; O’Brien, K.P.; Myers, J.P.

2013-01-01

A central goal of green chemistry is to avoid hazard in the design of new chemicals. This objective is best achieved when information about a chemical’s potential hazardous effects is obtained as early in the design process as feasible. Endocrine disruption is a type of hazard that to date has been inadequately addressed by both industrial and regulatory science. To aid chemists in avoiding this hazard, we propose an endocrine disruption testing protocol for use by chemists in the design of new chemicals. The Tiered Protocol for Endocrine Disruption (TiPED) has been created under the oversight of a scientific advisory committee composed of leading representatives from both green chemistry and the environmental health sciences. TiPED is conceived as a tool for new chemical design, thus it starts with a chemist theoretically at “the drawing board.” It consists of five testing tiers ranging from broad in silico evaluation up through specific cell- and whole organism-based assays. To be effective at detecting endocrine disruption, a testing protocol must be able to measure potential hormone-like or hormone-inhibiting effects of chemicals, as well as the many possible interactions and signaling sequellae such chemicals may have with cell-based receptors. Accordingly, we have designed this protocol to broadly interrogate the endocrine system. The proposed protocol will not detect all possible mechanisms of endocrine disruption, because scientific understanding of these phenomena is advancing rapidly. To ensure that the protocol remains current, we have established a plan for incorporating new assays into the protocol as the science advances. In this paper we present the principles that should guide the science of testing new chemicals for endocrine disruption, as well as principles by which to evaluate individual assays for applicability, and laboratories for reliability. In a ‘proof-of-principle’ test, we ran 6 endocrine disrupting chemicals (EDCs) that act via different endocrinological mechanisms through the protocol using published literature. Each was identified as endocrine active by one or more tiers. We believe that this voluntary testing protocol will be a dynamic tool to facilitate efficient and early identification of potentially problematic chemicals, while ultimately reducing the risks to public health. PMID:25110461

Designing Endocrine Disruption Out of the Next Generation of Chemicals.

PubMed

Schug, T T; Abagyan, R; Blumberg, B; Collins, T J; Crews, D; DeFur, P L; Dickerson, S M; Edwards, T M; Gore, A C; Guillette, L J; Hayes, T; Heindel, J J; Moores, A; Patisaul, H B; Tal, T L; Thayer, K A; Vandenberg, L N; Warner, J; Watson, C S; Saal, F S Vom; Zoeller, R T; O'Brien, K P; Myers, J P

2013-01-01

A central goal of green chemistry is to avoid hazard in the design of new chemicals. This objective is best achieved when information about a chemical's potential hazardous effects is obtained as early in the design process as feasible. Endocrine disruption is a type of hazard that to date has been inadequately addressed by both industrial and regulatory science. To aid chemists in avoiding this hazard, we propose an endocrine disruption testing protocol for use by chemists in the design of new chemicals. The Tiered Protocol for Endocrine Disruption (TiPED) has been created under the oversight of a scientific advisory committee composed of leading representatives from both green chemistry and the environmental health sciences. TiPED is conceived as a tool for new chemical design, thus it starts with a chemist theoretically at "the drawing board." It consists of five testing tiers ranging from broad in silico evaluation up through specific cell- and whole organism-based assays. To be effective at detecting endocrine disruption, a testing protocol must be able to measure potential hormone-like or hormone-inhibiting effects of chemicals, as well as the many possible interactions and signaling sequellae such chemicals may have with cell-based receptors. Accordingly, we have designed this protocol to broadly interrogate the endocrine system. The proposed protocol will not detect all possible mechanisms of endocrine disruption, because scientific understanding of these phenomena is advancing rapidly. To ensure that the protocol remains current, we have established a plan for incorporating new assays into the protocol as the science advances. In this paper we present the principles that should guide the science of testing new chemicals for endocrine disruption, as well as principles by which to evaluate individual assays for applicability, and laboratories for reliability. In a 'proof-of-principle' test, we ran 6 endocrine disrupting chemicals (EDCs) that act via different endocrinological mechanisms through the protocol using published literature. Each was identified as endocrine active by one or more tiers. We believe that this voluntary testing protocol will be a dynamic tool to facilitate efficient and early identification of potentially problematic chemicals, while ultimately reducing the risks to public health.

Refining animal models in fracture research: seeking consensus in optimising both animal welfare and scientific validity for appropriate biomedical use.

PubMed

Auer, Jorg A; Goodship, Allen; Arnoczky, Steven; Pearce, Simon; Price, Jill; Claes, Lutz; von Rechenberg, Brigitte; Hofmann-Amtenbrinck, Margarethe; Schneider, Erich; Müller-Terpitz, R; Thiele, F; Rippe, Klaus-Peter; Grainger, David W

2007-08-01

In an attempt to establish some consensus on the proper use and design of experimental animal models in musculoskeletal research, AOVET (the veterinary specialty group of the AO Foundation) in concert with the AO Research Institute (ARI), and the European Academy for the Study of Scientific and Technological Advance, convened a group of musculoskeletal researchers, veterinarians, legal experts, and ethicists to discuss, in a frank and open forum, the use of animals in musculoskeletal research. The group narrowed the field to fracture research. The consensus opinion resulting from this workshop can be summarized as follows: Anaesthesia and pain management protocols for research animals should follow standard protocols applied in clinical work for the species involved. This will improve morbidity and mortality outcomes. A database should be established to facilitate selection of anaesthesia and pain management protocols for specific experimental surgical procedures and adopted as an International Standard (IS) according to animal species selected. A list of 10 golden rules and requirements for conduction of animal experiments in musculoskeletal research was drawn up comprising 1) Intelligent study designs to receive appropriate answers; 2) Minimal complication rates (5 to max. 10%); 3) Defined end-points for both welfare and scientific outputs analogous to quality assessment (QA) audit of protocols in GLP studies; 4) Sufficient details for materials and methods applied; 5) Potentially confounding variables (genetic background, seasonal, hormonal, size, histological, and biomechanical differences); 6) Post-operative management with emphasis on analgesia and follow-up examinations; 7) Study protocols to satisfy criteria established for a "justified animal study"; 8) Surgical expertise to conduct surgery on animals; 9) Pilot studies as a critical part of model validation and powering of the definitive study design; 10) Criteria for funding agencies to include requirements related to animal experiments as part of the overall scientific proposal review protocols. Such agencies are also encouraged to seriously consider and adopt the recommendations described here when awarding funds for specific projects. Specific new requirements and mandates related both to improving the welfare and scientific rigour of animal-based research models are urgently needed as part of international harmonization of standards.

Design of a Channel Error Simulator using Virtual Instrument Techniques for the Initial Testing of TCP/IP and SCPS Protocols

NASA Technical Reports Server (NTRS)

Horan, Stephen; Wang, Ru-Hai

1999-01-01

There exists a need for designers and developers to have a method to conveniently test a variety of communications parameters for an overall system design. This is no different when testing network protocols as when testing modulation formats. In this report, we discuss a means of providing a networking test device specifically designed to be used for space communications. This test device is a PC-based Virtual Instrument (VI) programmed using the LabVIEW(TM) version 5 software suite developed by National Instruments(TM)TM. This instrument was designed to be portable and usable by others without special, additional equipment. The programming was designed to replicate a VME-based hardware module developed earlier at New Mexico State University (NMSU) and to provide expanded capabilities exceeding the baseline configuration existing in that module. This report describes the design goals for the VI module in the next section and follows that with a description of the design of the VI instrument. This is followed with a description of the validation tests run on the VI. An application of the error-generating VI to networking protocols is then given.

Chapter 19: HVAC Controls (DDC/EMS/BAS) Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W.; Romberger, Jeff

The HVAC Controls Evaluation Protocol is designed to address evaluation issues for direct digital controls/energy management systems/building automation systems (DDC/EMS/BAS) that are installed to control heating, ventilation, and air-conditioning (HVAC) equipment in commercial and institutional buildings. (This chapter refers to the DDC/EMS/BAS measure as HVAC controls.) This protocol may also be applicable to industrial facilities such as clean rooms and labs, which have either significant HVAC equipment or spaces requiring special environmental conditions.

Technical Analysis of SSP-21 Protocol

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bromberger, S.

As part of the California Energy Systems for the Twenty-First Century (CES-21) program, in December 2016 San Diego Gas and Electric (SDG&E) contracted with Lawrence Livermore National Laboratory (LLNL) to perform an independent verification and validation (IV&V) of a white paper describing their Secure SCADA Protocol for the Twenty-First Century (SSP-21) in order to analyze the effectiveness and propriety of cryptographic protocol use within the SSP-21 specification. SSP-21 is designed to use cryptographic protocols to provide (optional) encryption, authentication, and nonrepudiation, among other capabilities. The cryptographic protocols to be used reflect current industry standards; future versions of SSP-21 will usemore » other advanced technologies to provide a subset of security services.« less

Level of functional capacities following soccer-specific warm-up methods among elite collegiate soccer players.

PubMed

Vazini Taher, Amir; Parnow, Abdolhossein

2017-05-01

Different methods of warm-up may have implications in improving various aspects of soccer performance. The present study aimed to investigate acute effects of soccer specific warm-up protocols on functional performance tests. This study using randomized within-subject design, investigated the performance of 22 collegiate elite soccer player following soccer specific warm-ups using dynamic stretching, static stretching, and FIFA 11+ program. Post warm-up examinations consisted: 1) Illinois Agility Test; 2) vertical jump; 3) 30 meter sprint; 4) consecutive turns; 5) flexibility of knee. Vertical jump performance was significantly lower following static stretching, as compared to dynamic stretching (P=0.005). Sprint performance declined significantly following static stretching as compared to FIFA 11+ (P=0.023). Agility time was significantly faster following dynamic stretching as compared to FIFA 11+ (P=0.001) and static stretching (P=0.001). Knee flexibility scores were significantly improved following the static stretching as compared to dynamic stretching (P=016). No significant difference was observed for consecutive turns between three warm-up protocol. The present finding showed that a soccer specific warm-up protocol relied on dynamic stretching is preferable in enhancing performance as compared to protocols relying on static stretches and FIFA 11+ program. Investigators suggest that while different soccer specific warm-up protocols have varied types of effects on performance, acute effects of dynamic stretching on performance in elite soccer players are assured, however application of static stretching in reducing muscle stiffness is demonstrated.

Protocol Design Challenges in the Detection of Awareness in Aware Subjects Using EEG Signals.

PubMed

Henriques, J; Gabriel, D; Grigoryeva, L; Haffen, E; Moulin, T; Aubry, R; Pazart, L; Ortega, J-P

2016-10-01

Recent studies have evidenced serious difficulties in detecting covert awareness with electroencephalography-based techniques both in unresponsive patients and in healthy control subjects. This work reproduces the protocol design in two recent mental imagery studies with a larger group comprising 20 healthy volunteers. The main goal is assessing if modifications in the signal extraction techniques, training-testing/cross-validation routines, and hypotheses evoked in the statistical analysis, can provide solutions to the serious difficulties documented in the literature. The lack of robustness in the results advises for further search of alternative protocols more suitable for machine learning classification and of better performing signal treatment techniques. Specific recommendations are made using the findings in this work. © EEG and Clinical Neuroscience Society (ECNS) 2014.

A Systematic Review on Immediate Loading of Implants Used to Support Overdentures Opposed by Conventional Prostheses: Factors That Might Influence Clinical Outcomes.

PubMed

Zygogiannis, Kostas; Wismeijer, Daniel; Aartman, Irene Ha; Osman, Reham B

2016-01-01

Different treatment protocols in terms of number, diameter, and suprastructure design have been proposed for immediately loaded implants that are used to support mandibular overdentures opposed by maxillary conventional dentures. The aim of this study was to investigate the influence of these protocols on survival rates as well as clinical and prosthodontic outcomes. Several electronic databases were searched for all relevant articles published from 1966 to June 2014. Only randomized controlled trials and prospective studies with a minimum follow-up of 12 months were selected. The primary outcomes of interest were the success and survival rates of the implants. Prosthodontic complications were also evaluated. Fourteen studies fulfilled the inclusion criteria. Of the studies identified, nine were randomized controlled trials and five were prospective studies. The mean follow-up period was 3 years or less for the vast majority of the studies. The reported survival and success rates were comparable to that of conventional loading for most of the included studies. No specific immediate loading protocol seemed to perform better in terms of clinical and prosthodontic outcomes. Immediate loading protocols of mandibular overdentures seem to be a viable alternative to conventional loading. It was not possible to recommend a specific treatment protocol related to the number, diameter of the implants, and attachment system used. Long-term, well-designed studies comparing different immediate loading modalities could help to establish a protocol that delivers the most clinically predictable, efficient, and cost-effective outcome for edentulous patients in need of implant overdentures.

Development and Operation of Dual-Mode Analyzers for Wireless Power Consortium/Power Matters Alliance Wireless Power Systems.

PubMed

Um, Keehong

2016-05-01

We have designed a protocol analyzer to be used in wireless power systems and analyzed the operation of wireless chargers defined by standards of Qi of Wireless Power Consortium (WPC) and Power Matters Alliance (PMA) protocols. The integrated circuit (IC, or microchip) developed so far for wireless power transmission is not easily adopted by chargers for specific purposes. A device for measuring the performance of test equipment currently available is required to transform and expand the types of protocol. Since a protocol analyzer with these functions is required, we have developed a device that can analyze the two protocols of WPC and PMA at the same time. As a result of our research, we present a dual-mode system that can analyze the protocols of both WPC and PMA.

A comparative study of wireless sensor networks and their routing protocols.

PubMed

Bhattacharyya, Debnath; Kim, Tai-hoon; Pal, Subhajit

2010-01-01

Recent developments in the area of micro-sensor devices have accelerated advances in the sensor networks field leading to many new protocols specifically designed for wireless sensor networks (WSNs). Wireless sensor networks with hundreds to thousands of sensor nodes can gather information from an unattended location and transmit the gathered data to a particular user, depending on the application. These sensor nodes have some constraints due to their limited energy, storage capacity and computing power. Data are routed from one node to other using different routing protocols. There are a number of routing protocols for wireless sensor networks. In this review article, we discuss the architecture of wireless sensor networks. Further, we categorize the routing protocols according to some key factors and summarize their mode of operation. Finally, we provide a comparative study on these various protocols.

In Situ Chemical Oxidation for Groundwater Remediation: Site-Specific Engineering & Technology Application

DTIC Science & Technology

2010-10-01

PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Colorado School of Mines,1500 Illinois St, Golden ,CO,80401 8. PERFORMING ORGANIZATION REPORT NUMBER 9...Protocol page 13 Overall ISCO Protocol Flow Diagram addition, laboratory studies may be used to select optimal chemistry parameters to maximize oxidant...Design Process 5. Because of the complexity of these oxidants’ chemistry and implementation, with much of the knowledge base residing with those

Efficient authentication scheme based on near-ring root extraction problem

NASA Astrophysics Data System (ADS)

Muthukumaran, V.; Ezhilmaran, D.

2017-11-01

An authentication protocolis the type of computer communication protocol or cryptography protocol specifically designed for transfer of authentication data between two entities. We have planned a two new entity authentication scheme on the basis of root extraction problem near-ring in this article. We suggest that this problem is suitably difficult to serve as a cryptographic assumption over the platform of near-ring N. The security issues also discussed.

Marine Resiliency Study II

DTIC Science & Technology

2016-07-06

prevention or treatment protocols, or the use of new technology (e.g. MEG ). 5. In coordination with HQMC, NIMH and Army STARRS, to determine...experimental designs such as targeted prevention or treatment protocols or the use of new technology (e.g. MEG ) to identify biomarkers. A specific goal of the...blast sensors, and to analyze MEG data in relation to blast event outcomes during field training. Of the enrolled Marines in the Demonstration Project 4

Patient-based estimation of organ dose for a population of 58 adult patients across 13 protocol categories

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sahbaee, Pooyan, E-mail: psahbae@ncsu.edu; Segars, W. Paul; Samei, Ehsan

2014-07-15

Purpose: This study aimed to provide a comprehensive patient-specific organ dose estimation across a multiplicity of computed tomography (CT) examination protocols. Methods: A validated Monte Carlo program was employed to model a common CT system (LightSpeed VCT, GE Healthcare). The organ and effective doses were estimated from 13 commonly used body and neurological CT examination. The dose estimation was performed on 58 adult computational extended cardiac-torso phantoms (35 male, 23 female, mean age 51.5 years, mean weight 80.2 kg). The organ dose normalized by CTDI{sub vol} (h factor) and effective dose normalized by the dose length product (DLP) (k factor)more » were calculated from the results. A mathematical model was derived for the correlation between the h and k factors with the patient size across the protocols. Based on this mathematical model, a dose estimation iPhone operating system application was designed and developed to be used as a tool to estimate dose to the patients for a variety of routinely used CT examinations. Results: The organ dose results across all the protocols showed an exponential decrease with patient body size. The correlation was generally strong for the organs which were fully or partially located inside the scan coverage (Pearson sample correlation coefficient (r) of 0.49). The correlation was weaker for organs outside the scan coverage for which distance between the organ and the irradiation area was a stronger predictor of dose to the organ. For body protocols, the effective dose before and after normalization by DLP decreased exponentially with increasing patient's body diameter (r > 0.85). The exponential relationship between effective dose and patient's body diameter was significantly weaker for neurological protocols (r < 0.41), where the trunk length was a slightly stronger predictor of effective dose (0.15 < r < 0.46). Conclusions: While the most accurate estimation of a patient dose requires specific modeling of the patient anatomy, a first order approximation of organ and effective doses from routine CT scan protocols can be reasonably estimated using size specific factors. Estimation accuracy is generally poor for organ outside the scan range and for neurological protocols. The dose calculator designed in this study can be used to conveniently estimate and report the dose values for a patient across a multiplicity of CT scan protocols.« less

Optogenetically inspired deep brain stimulation: linking basic with clinical research.

PubMed

Lüscher, Christian; Pollak, Pierre

2016-01-01

In the last decade, optogenetics has revolutionised the neurosciences. The technique, which allows for cell-type specific excitation and inhibition of neurons in the brain of freely moving rodents, has been used to tighten the links of causality between neural activity and behaviour. Optogenetics is also enabling an unprecedented characterisation of circuits and their dysfunction in a number of brain diseases, above all those conditions that are not caused by neurodegeneration. Notable progress has been made in addiction, depression and obsessive-compulsive disorders, as well as other anxiety disorders. By extension, the technique has also been used to propose blueprints for innovative rational treatment of these diseases. The goal is to design manipulations that disrupt pathological circuit function or restore normal activity. This can be achieved by targeting specific projections in order to apply specific stimulation protocols validated by ex-vivo analysis of the mechanisms underlying the dysfunction. In a number of cases, specific forms of pathological synaptic plasticity have been implicated. For example, addictive drugs via strong increase of dopamine trigger a myriad of alterations of glutamate and γ-aminobutyric acid transmission, also called drug-evoked synaptic plasticity. This opens the way to the design of optogenetic reversal protocols, which might restore normal transmission with the hope to abolish the pathological behaviour. Several proof of principle studies for this approach have recently been published. However, for many reasons, optogenetics will not be translatable to human applications in the near future. Here, we argue that an intermediate step is novel deep brain stimulation (DBS) protocols that emulate successful optogenetic approaches in animal models. We provide a roadmap for a translational path to rational, optogenetically inspired DBS protocols to refine existing approaches and expand to novel indications.

Outcome and toxicity associated with a dose-intensified, maintenance-free CHOP-based chemotherapy protocol in canine lymphoma: 130 cases.

PubMed

Sorenmo, Karin; Overley, B; Krick, E; Ferrara, T; LaBlanc, A; Shofer, F

2010-09-01

A dose-intensified/dose-dense chemotherapy protocol for canine lymphoma was designed and implemented at the Veterinary Hospital of the University of Pennsylvania. In this study, we describe the clinical characteristics, prognostic factors, efficacy and toxicity in 130 dogs treated with this protocol. The majority of the dogs had advanced stage disease (63.1% stage V) and sub-stage b (58.5%). The median time to progression (TTP) and lymphoma-specific survival were 219 and 323 days, respectively. These results are similar to previous less dose-intense protocols. Sub-stage was a significant negative prognostic factor for survival. The incidence of toxicity was high; 53.9 and 45% of the dogs needed dose reductions and treatment delays, respectively. Dogs that required dose reductions and treatment delays had significantly longer TTP and lymphoma-specific survival times. These results suggest that dose density is important, but likely relative, and needs to be adjusted according to the individual patient's toxicity for optimal outcome.

Psychological treatment of Comorbid Asthma and Panic Disorder: A Pilot Study

PubMed Central

Lehrer, Paul M.; Karavidas, Maria Katsamanis; Lu, Shou-En; Feldman, Jonathan; Kranitz, Linda; Abraham, Smrithy; Sanderson, William; Reynolds, Russ

2008-01-01

We evaluated two protocols for treating adults with comorbid asthma and panic disorder. The protocols included elements of Barlow’s “panic control therapy” and several asthma education programs, as well as modules designed to teach participants how to differentiate asthma and panic symptoms, and how to apply specific home management strategies for each. Fifty percent of subjects dropped out of a 14-session protocol by the eighth session; however, 83% of patients were retained in an eight-session protocol. Clinical results were mostly equivalent: significant decreases of >50% in panic symptoms, clinically significant decreases in asthma symptoms, improvement in asthma quality of life, and maintenance of clinical stability in asthma. Albuterol use decreased significantly in the 14-session protocol and at a borderline level in the 8-session protocol, while pulmonary function was maintained. A controlled evaluation of this procedure is warranted. PMID:17693054

RosettaScripts: a scripting language interface to the Rosetta macromolecular modeling suite.

PubMed

Fleishman, Sarel J; Leaver-Fay, Andrew; Corn, Jacob E; Strauch, Eva-Maria; Khare, Sagar D; Koga, Nobuyasu; Ashworth, Justin; Murphy, Paul; Richter, Florian; Lemmon, Gordon; Meiler, Jens; Baker, David

2011-01-01

Macromolecular modeling and design are increasingly useful in basic research, biotechnology, and teaching. However, the absence of a user-friendly modeling framework that provides access to a wide range of modeling capabilities is hampering the wider adoption of computational methods by non-experts. RosettaScripts is an XML-like language for specifying modeling tasks in the Rosetta framework. RosettaScripts provides access to protocol-level functionalities, such as rigid-body docking and sequence redesign, and allows fast testing and deployment of complex protocols without need for modifying or recompiling the underlying C++ code. We illustrate these capabilities with RosettaScripts protocols for the stabilization of proteins, the generation of computationally constrained libraries for experimental selection of higher-affinity binding proteins, loop remodeling, small-molecule ligand docking, design of ligand-binding proteins, and specificity redesign in DNA-binding proteins.

Validation of Autoclave Protocols for Successful Decontamination of Category A Medical Waste Generated from Care of Patients with Serious Communicable Diseases

PubMed Central

Reimers, Mallory; Ernst, Neysa; Bova, Gregory; Nowakowski, Elaine; Bukowski, James; Ellis, Brandon C.; Smith, Chris; Sauer, Lauren; Dionne, Kim; Carroll, Karen C.; Maragakis, Lisa L.; Parrish, Nicole M.

2016-01-01

ABSTRACT In response to the Ebola outbreak in 2014, many hospitals designated specific areas to care for patients with Ebola and other highly infectious diseases. The safe handling of category A infectious substances is a unique challenge in this environment. One solution is on-site waste treatment with a steam sterilizer or autoclave. The Johns Hopkins Hospital (JHH) installed two pass-through autoclaves in its biocontainment unit (BCU). The JHH BCU and The Johns Hopkins biosafety level 3 (BSL-3) clinical microbiology laboratory designed and validated waste-handling protocols with simulated patient trash to ensure adequate sterilization. The results of the validation process revealed that autoclave factory default settings are potentially ineffective for certain types of medical waste and highlighted the critical role of waste packaging in successful sterilization. The lessons learned from the JHH validation process can inform the design of waste management protocols to ensure effective treatment of highly infectious medical waste. PMID:27927920

Design of a Software Configuration for Real-Time Multimedia Group Communication; HNUMTP

NASA Astrophysics Data System (ADS)

Park, Gil-Cheol

This paper designs transport protocol of multi-session/channel method for real time multimedia group telecommunication and realizes it. The special features of the designed and realized protocol are first, that it solved the sync problem which is the specific character of multimedia telecommunication by using multi-channel method protocol. Usual multimedia telecommunication is assigned one channel by each media data. This paper shortened the phenomenon that waits data for sync of receiving part by assigning more than one channel for the channel that has a lot of data per hour as video data. The problem of intermedia synchronization that happens then could be solved by sending temporal/spacial related data among data assigning extra control channel. Second, that it does integrated management for sessions. Each session is one group telecommunication unit which supports mutual working environment that is independent. Each session communicates the participants in the group independently, the session manager manages all the communication among groups and lets media sources connected with all network be operated efficiently.

Validation of Autoclave Protocols for Successful Decontamination of Category A Medical Waste Generated from Care of Patients with Serious Communicable Diseases.

PubMed

Garibaldi, Brian T; Reimers, Mallory; Ernst, Neysa; Bova, Gregory; Nowakowski, Elaine; Bukowski, James; Ellis, Brandon C; Smith, Chris; Sauer, Lauren; Dionne, Kim; Carroll, Karen C; Maragakis, Lisa L; Parrish, Nicole M

2017-02-01

In response to the Ebola outbreak in 2014, many hospitals designated specific areas to care for patients with Ebola and other highly infectious diseases. The safe handling of category A infectious substances is a unique challenge in this environment. One solution is on-site waste treatment with a steam sterilizer or autoclave. The Johns Hopkins Hospital (JHH) installed two pass-through autoclaves in its biocontainment unit (BCU). The JHH BCU and The Johns Hopkins biosafety level 3 (BSL-3) clinical microbiology laboratory designed and validated waste-handling protocols with simulated patient trash to ensure adequate sterilization. The results of the validation process revealed that autoclave factory default settings are potentially ineffective for certain types of medical waste and highlighted the critical role of waste packaging in successful sterilization. The lessons learned from the JHH validation process can inform the design of waste management protocols to ensure effective treatment of highly infectious medical waste. Copyright © 2017 American Society for Microbiology.

Simulation Modeling and Performance Evaluation of Space Networks

NASA Technical Reports Server (NTRS)

Jennings, Esther H.; Segui, John

2006-01-01

In space exploration missions, the coordinated use of spacecraft as communication relays increases the efficiency of the endeavors. To conduct trade-off studies of the performance and resource usage of different communication protocols and network designs, JPL designed a comprehensive extendable tool, the Multi-mission Advanced Communications Hybrid Environment for Test and Evaluation (MACHETE). The design and development of MACHETE began in 2000 and is constantly evolving. Currently, MACHETE contains Consultative Committee for Space Data Systems (CCSDS) protocol standards such as Proximity-1, Advanced Orbiting Systems (AOS), Packet Telemetry/Telecommand, Space Communications Protocol Specification (SCPS), and the CCSDS File Delivery Protocol (CFDP). MACHETE uses the Aerospace Corporation s Satellite Orbital Analysis Program (SOAP) to generate the orbital geometry information and contact opportunities. Matlab scripts provide the link characteristics. At the core of MACHETE is a discrete event simulator, QualNet. Delay Tolerant Networking (DTN) is an end-to-end architecture providing communication in and/or through highly stressed networking environments. Stressed networking environments include those with intermittent connectivity, large and/or variable delays, and high bit error rates. To provide its services, the DTN protocols reside at the application layer of the constituent internets, forming a store-and-forward overlay network. The key capabilities of the bundling protocols include custody-based reliability, ability to cope with intermittent connectivity, ability to take advantage of scheduled and opportunistic connectivity, and late binding of names to addresses. In this presentation, we report on the addition of MACHETE models needed to support DTN, namely: the Bundle Protocol (BP) model. To illustrate the use of MACHETE with the additional DTN model, we provide an example simulation to benchmark its performance. We demonstrate the use of the DTN protocol and discuss statistics gathered concerning the total time needed to simulate numerous bundle transmissions

A pilot investigation to optimise methods for a future satiety preload study.

PubMed

Hobden, Mark R; Guérin-Deremaux, Laetitia; Commane, Daniel M; Rowland, Ian; Gibson, Glenn R; Kennedy, Orla B

2017-01-01

Preload studies are used to investigate the satiating effects of foods and food ingredients. However, the design of preload studies is complex, with many methodological considerations influencing appetite responses. The aim of this pilot investigation was to determine acceptability, and optimise methods, for a future satiety preload study. Specifically, we investigated the effects of altering (i) energy intake at a standardised breakfast (gender-specific or non-gender specific), and (ii) the duration between mid-morning preload and ad libitum lunch meal, on morning appetite scores and energy intake at lunch. Participants attended a single study visit. Female participants consumed a 214-kcal breakfast ( n  = 10) or 266-kcal breakfast ( n  = 10), equivalent to 10% of recommended daily energy intakes for females and males, respectively. Male participants ( n  = 20) consumed a 266-kcal breakfast. All participants received a 250-ml orange juice preload 2 h after breakfast. The impact of different study timings was evaluated in male participants, with 10 males following one protocol (protocol 1) and 10 males following another (protocol 2). The duration between preload and ad libitum lunch meal was 2 h (protocol 1) or 2.5 h (protocol 2), with the ad libitum lunch meal provided at 12.00 or 13.00, respectively. All female participants followed protocol 2. Visual analogue scale (VAS) questionnaires were used to assess appetite responses and food/drink palatability. Correlation between male and female appetite scores was higher with the provision of a gender-specific breakfast, compared to non-gender-specific breakfast (Pearson correlation of 0.747 and 0.479, respectively). No differences in subjective appetite or ad libitum energy intake were found between protocols 1 and 2. VAS mean ratings of liking, enjoyment, and palatability were all > 66 out of 100 mm for breakfast, preload, and lunch meals. The findings of this pilot study confirm the acceptability of this methodology for future satiety preload studies. Appetite scores increased from preload to ad libitum lunch meal; however, no specific differences were found between protocols. The results highlight the importance of considering energy intake prior to preload provision, with a gender-specific breakfast improving the correlation between male and female appetite score responses to a morning preload.

Rapid Sampling of Hydrogen Bond Networks for Computational Protein Design.

PubMed

Maguire, Jack B; Boyken, Scott E; Baker, David; Kuhlman, Brian

2018-05-08

Hydrogen bond networks play a critical role in determining the stability and specificity of biomolecular complexes, and the ability to design such networks is important for engineering novel structures, interactions, and enzymes. One key feature of hydrogen bond networks that makes them difficult to rationally engineer is that they are highly cooperative and are not energetically favorable until the hydrogen bonding potential has been satisfied for all buried polar groups in the network. Existing computational methods for protein design are ill-equipped for creating these highly cooperative networks because they rely on energy functions and sampling strategies that are focused on pairwise interactions. To enable the design of complex hydrogen bond networks, we have developed a new sampling protocol in the molecular modeling program Rosetta that explicitly searches for sets of amino acid mutations that can form self-contained hydrogen bond networks. For a given set of designable residues, the protocol often identifies many alternative sets of mutations/networks, and we show that it can readily be applied to large sets of residues at protein-protein interfaces or in the interior of proteins. The protocol builds on a recently developed method in Rosetta for designing hydrogen bond networks that has been experimentally validated for small symmetric systems but was not extensible to many larger protein structures and complexes. The sampling protocol we describe here not only recapitulates previously validated designs with performance improvements but also yields viable hydrogen bond networks for cases where the previous method fails, such as the design of large, asymmetric interfaces relevant to engineering protein-based therapeutics.

Acute Achilles Tendon Rupture: Clinical Evaluation, Conservative Management, and Early Active Rehabilitation.

PubMed

Kauwe, Merrell

2017-04-01

The Achilles tendon (AT) is the strongest, largest, and most commonly ruptured tendon in the human body. Physical examination provides high sensitivity and specificity. Imaging studies are not recommended unless there are equivocal findings in the physical examination. Recent studies have shown that the risk of re-rupture is negated with implementation of functional rehabilitation protocols. Heterogeneity in study design makes conclusions on the specifics of functional rehabilitation protocols difficult; however, it is clear that early weight bearing and early controlled mobilization lead to better patient outcome and satisfaction in both surgically and conservatively treated populations. Copyright © 2016 Elsevier Inc. All rights reserved.

Refining animal models in fracture research: seeking consensus in optimising both animal welfare and scientific validity for appropriate biomedical use

PubMed Central

Auer, Jorg A; Goodship, Allen; Arnoczky, Steven; Pearce, Simon; Price, Jill; Claes, Lutz; von Rechenberg, Brigitte; Hofmann-Amtenbrinck, Margarethe; Schneider, Erich; Müller-Terpitz, R; Thiele, F; Rippe, Klaus-Peter; Grainger, David W

2007-01-01

Background In an attempt to establish some consensus on the proper use and design of experimental animal models in musculoskeletal research, AOVET (the veterinary specialty group of the AO Foundation) in concert with the AO Research Institute (ARI), and the European Academy for the Study of Scientific and Technological Advance, convened a group of musculoskeletal researchers, veterinarians, legal experts, and ethicists to discuss, in a frank and open forum, the use of animals in musculoskeletal research. Methods The group narrowed the field to fracture research. The consensus opinion resulting from this workshop can be summarized as follows: Results & Conclusion Anaesthesia and pain management protocols for research animals should follow standard protocols applied in clinical work for the species involved. This will improve morbidity and mortality outcomes. A database should be established to facilitate selection of anaesthesia and pain management protocols for specific experimental surgical procedures and adopted as an International Standard (IS) according to animal species selected. A list of 10 golden rules and requirements for conduction of animal experiments in musculoskeletal research was drawn up comprising 1) Intelligent study designs to receive appropriate answers; 2) Minimal complication rates (5 to max. 10%); 3) Defined end-points for both welfare and scientific outputs analogous to quality assessment (QA) audit of protocols in GLP studies; 4) Sufficient details for materials and methods applied; 5) Potentially confounding variables (genetic background, seasonal, hormonal, size, histological, and biomechanical differences); 6) Post-operative management with emphasis on analgesia and follow-up examinations; 7) Study protocols to satisfy criteria established for a "justified animal study"; 8) Surgical expertise to conduct surgery on animals; 9) Pilot studies as a critical part of model validation and powering of the definitive study design; 10) Criteria for funding agencies to include requirements related to animal experiments as part of the overall scientific proposal review protocols. Such agencies are also encouraged to seriously consider and adopt the recommendations described here when awarding funds for specific projects. Specific new requirements and mandates related both to improving the welfare and scientific rigour of animal-based research models are urgently needed as part of international harmonization of standards. PMID:17678534

Scada Malware, a Proof of Concept

NASA Astrophysics Data System (ADS)

Carcano, Andrea; Fovino, Igor Nai; Masera, Marcelo; Trombetta, Alberto

Critical Infrastructures are nowadays exposed to new kind of threats. The cause of such threats is related to the large number of new vulnerabilities and architectural weaknesses introduced by the extensive use of ICT and Network technologies into such complex critical systems. Of particular interest are the set of vulnerabilities related to the class of communication protocols normally known as “SCADA” protocols, under which fall all the communication protocols used to remotely control the RTU devices of an industrial system. In this paper we present a proof of concept of the potential effects of a set of computer malware specifically designed and created in order to impact, by taking advantage of some vulnerabilities of the ModBUS protocol, on a typical Supervisory Control and Data Acquisition system.

Potential of Wake-Up Radio-Based MAC Protocols for Implantable Body Sensor Networks (IBSN)—A Survey

PubMed Central

Karuppiah Ramachandran, Vignesh Raja; Ayele, Eyuel D.; Meratnia, Nirvana; Havinga, Paul J. M.

2016-01-01

With the advent of nano-technology, medical sensors and devices are becoming highly miniaturized. Consequently, the number of sensors and medical devices being implanted to accurately monitor and diagnose a disease is increasing. By measuring the symptoms and controlling a medical device as close as possible to the source, these implantable devices are able to save lives. A wireless link between medical sensors and implantable medical devices is essential in the case of closed-loop medical devices, in which symptoms of the diseases are monitored by sensors that are not placed in close proximity of the therapeutic device. Medium Access Control (MAC) is crucial to make it possible for several medical devices to communicate using a shared wireless medium in such a way that minimum delay, maximum throughput, and increased network life-time are guaranteed. To guarantee this Quality of Service (QoS), the MAC protocols control the main sources of limited resource wastage, namely the idle-listening, packet collisions, over-hearing, and packet loss. Traditional MAC protocols designed for body sensor networks are not directly applicable to Implantable Body Sensor Networks (IBSN) because of the dynamic nature of the radio channel within the human body and the strict QoS requirements of IBSN applications. Although numerous MAC protocols are available in the literature, the majority of them are designed for Body Sensor Network (BSN) and Wireless Sensor Network (WSN). To the best of our knowledge, there is so far no research paper that explores the impact of these MAC protocols specifically for IBSN. MAC protocols designed for implantable devices are still in their infancy and one of their most challenging objectives is to be ultra-low-power. One of the technological solutions to achieve this objective so is to integrate the concept of Wake-up radio (WuR) into the MAC design. In this survey, we present a taxonomy of MAC protocols based on their use of WuR technology and identify their bottlenecks to be used in IBSN applications. Furthermore, we present a number of open research challenges and requirements for designing an energy-efficient and reliable wireless communication protocol for IBSN. PMID:27916822

Potential of Wake-Up Radio-Based MAC Protocols for Implantable Body Sensor Networks (IBSN)-A Survey.

PubMed

Karuppiah Ramachandran, Vignesh Raja; Ayele, Eyuel D; Meratnia, Nirvana; Havinga, Paul J M

2016-11-29

With the advent of nano-technology, medical sensors and devices are becoming highly miniaturized. Consequently, the number of sensors and medical devices being implanted to accurately monitor and diagnose a disease is increasing. By measuring the symptoms and controlling a medical device as close as possible to the source, these implantable devices are able to save lives. A wireless link between medical sensors and implantable medical devices is essential in the case of closed-loop medical devices, in which symptoms of the diseases are monitored by sensors that are not placed in close proximity of the therapeutic device. Medium Access Control (MAC) is crucial to make it possible for several medical devices to communicate using a shared wireless medium in such a way that minimum delay, maximum throughput, and increased network life-time are guaranteed. To guarantee this Quality of Service (QoS), the MAC protocols control the main sources of limited resource wastage, namely the idle-listening, packet collisions, over-hearing, and packet loss. Traditional MAC protocols designed for body sensor networks are not directly applicable to Implantable Body Sensor Networks (IBSN) because of the dynamic nature of the radio channel within the human body and the strict QoS requirements of IBSN applications. Although numerous MAC protocols are available in the literature, the majority of them are designed for Body Sensor Network (BSN) and Wireless Sensor Network (WSN). To the best of our knowledge, there is so far no research paper that explores the impact of these MAC protocols specifically for IBSN. MAC protocols designed for implantable devices are still in their infancy and one of their most challenging objectives is to be ultra-low-power. One of the technological solutions to achieve this objective so is to integrate the concept of Wake-up radio (WuR) into the MAC design. In this survey, we present a taxonomy of MAC protocols based on their use of WuR technology and identify their bottlenecks to be used in IBSN applications. Furthermore, we present a number of open research challenges and requirements for designing an energy-efficient and reliable wireless communication protocol for IBSN.

Internet Data Delivery for Future Space Missions

NASA Technical Reports Server (NTRS)

Rash, James; Hogie, Keith; Casasanta, Ralph; Hennessy, Joseph F. (Technical Monitor)

2002-01-01

This paper presents work being done at NASA/GSFC (Goddard Space Flight Center) on applying standard Internet applications and protocols to meet the technology challenge of future satellite missions. Internet protocols (IP) can provide seamless dynamic communication among heterogeneous instruments, spacecraft, ground stations, and constellations of spacecraft. A primary component of this work is to design and demonstrate automated end-to-end transport of files in a dynamic space environment using off-the-shelf, low-cost, commodity-level standard applications and protocols. These functions and capabilities will become increasingly significant in the years to come as both Earth and space science missions fly more sensors and the present labor-intensive, mission-specific techniques for processing and routing data become prohibitively expensive. This paper describes how an IP-based communication architecture can support existing operations concepts and how it will enable some new and complex communication and science concepts. The authors identify specific end-to-end file transfers all the way from instruments to control centers and scientists, and then describe how each data flow can be supported using standard Internet protocols and applications. The scenarios include normal data downlink and command uplink as well as recovery scenarios for both onboard and ground failures. The scenarios are based on an Earth orbiting spacecraft with data rates and downlink capabilities from 300 Kbps to 4 Mbps. Many examples are based on designs currently being investigated for the Global Precipitation Measurement (GPM) mission.

A Dynamic Approach to Make CDS/ISIS Databases Interoperable over the Internet Using the OAI Protocol

ERIC Educational Resources Information Center

Jayakanth, F.; Maly, K.; Zubair, M.; Aswath, L.

2006-01-01

Purpose: A dynamic approach to making legacy databases, like CDS/ISIS, interoperable with OAI-compliant digital libraries (DLs). Design/methodology/approach: There are many bibliographic databases that are being maintained using legacy database systems. CDS/ISIS is one such legacy database system. It was designed and developed specifically for…

RNA Nanostructures – Methods and Protocols | Center for Cancer Research

Cancer.gov

RNA nanotechnology is a young field with many potential applications. The goal is to utilize designed RNA strands, such that the obtained constructs have specific properties in terms of shape and functionality. RNA has potential functionalities that are comparable to that of proteins, but possesses (compared to proteins) simpler design principles akin to DNA. The promise is

Open architecture design and approach for the Integrated Sensor Architecture (ISA)

NASA Astrophysics Data System (ADS)

Moulton, Christine L.; Krzywicki, Alan T.; Hepp, Jared J.; Harrell, John; Kogut, Michael

2015-05-01

Integrated Sensor Architecture (ISA) is designed in response to stovepiped integration approaches. The design, based on the principles of Service Oriented Architectures (SOA) and Open Architectures, addresses the problem of integration, and is not designed for specific sensors or systems. The use of SOA and Open Architecture approaches has led to a flexible, extensible architecture. Using these approaches, and supported with common data formats, open protocol specifications, and Department of Defense Architecture Framework (DoDAF) system architecture documents, an integration-focused architecture has been developed. ISA can help move the Department of Defense (DoD) from costly stovepipe solutions to a more cost-effective plug-and-play design to support interoperability.

Comparison of traditional and recent approaches in the promotion of balance and strength in older adults.

PubMed

Granacher, Urs; Muehlbauer, Thomas; Zahner, Lukas; Gollhofer, Albert; Kressig, Reto W

2011-05-01

Demographic change in industrialized countries produced an increase in the proportion of elderly people in our society, resulting in specific healthcare challenges. One such challenge is how to effectively deal with the increased risk of sustaining a fall and fall-related injuries in old age. Deficits in postural control and muscle strength represent important intrinsic fall risk factors. Thus, adequate training regimens need to be designed and applied that have the potential to reduce the rate of falling in older adults by countering these factors. Therefore, the purpose of this review is to compare traditional and recent approaches in the promotion of balance and strength in older adults. Traditionally, balance and resistance training programmes proved to be effective in improving balance and strength, and in reducing the number of falls. Yet, it was argued that these training protocols are not specific enough to induce adaptations in neuromuscular capacities that are specifically needed in actual balance-threatening situations (e.g. abilities to recover balance and to produce force explosively). Recent studies indicated that perturbation-based or multitask balance training and power/high-velocity resistance training have the potential to improve these specific capacities because they comply with the principle of training specificity. In fact, there is evidence that these specifically tailored training programmes are more effective in improving balance recovery mechanisms and muscle power than traditional training protocols. A few pilot studies have even shown that these recently designed training protocols have an impact on the reduction of fall incidence rate in older adults. Further research is needed to confirm these results and to elucidate the underlying mechanisms responsible for the adaptive processes.

A protocol for better design, application, and communication of population viability analyses.

PubMed

Pe'er, Guy; Matsinos, Yiannis G; Johst, Karin; Franz, Kamila W; Turlure, Camille; Radchuk, Viktoriia; Malinowska, Agnieszka H; Curtis, Janelle M R; Naujokaitis-Lewis, Ilona; Wintle, Brendan A; Henle, Klaus

2013-08-01

Population viability analyses (PVAs) contribute to conservation theory, policy, and management. Most PVAs focus on single species within a given landscape and address a specific problem. This specificity often is reflected in the organization of published PVA descriptions. Many lack structure, making them difficult to understand, assess, repeat, or use for drawing generalizations across PVA studies. In an assessment comparing published PVAs and existing guidelines, we found that model selection was rarely justified; important parameters remained neglected or their implementation was described vaguely; limited details were given on parameter ranges, sensitivity analysis, and scenarios; and results were often reported too inconsistently to enable repeatability and comparability. Although many guidelines exist on how to design and implement reliable PVAs and standards exist for documenting and communicating ecological models in general, there is a lack of organized guidelines for designing, applying, and communicating PVAs that account for their diversity of structures and contents. To fill this gap, we integrated published guidelines and recommendations for PVA design and application, protocols for documenting ecological models in general and individual-based models in particular, and our collective experience in developing, applying, and reviewing PVAs. We devised a comprehensive protocol for the design, application, and communication of PVAs (DAC-PVA), which has 3 primary elements. The first defines what a useful PVA is; the second element provides a workflow for the design and application of a useful PVA and highlights important aspects that need to be considered during these processes; and the third element focuses on communication of PVAs to ensure clarity, comprehensiveness, repeatability, and comparability. Thereby, DAC-PVA should strengthen the credibility and relevance of PVAs for policy and management, and improve the capacity to generalize PVA findings across studies. © 2013 Society for Conservation Biology.

Decision Making and the IACUC: Part 1—Protocol Information Discussed at Full-Committee Reviews

PubMed Central

Silverman, Jerald; Lidz, Charles W; Clayfield, Jonathan C; Murray, Alexandra; Simon, Lorna J; Rondeau, Richard G

2015-01-01

IACUC protocols can be reviewed by either the full committee or designated members. Both review methods use the principles of the 3 Rs (reduce, refine, replace) as the overarching paradigm, with federal regulations and policies providing more detailed guidance. The primary goal of this study was to determine the frequency of topics discussed by IACUC during full-committee reviews and whether the topics included those required for consideration by IACUC (for example, pain and distress, number of animals used, availability of alternatives, skill and experience of researchers). We recorded and transcribed 87 protocol discussions undergoing full-committee review at 10 academic institutions. Each transcript was coded to capture the key concepts of the discussion and analyzed for the frequency of the codes mentioned. Pain and distress was the code mentioned most often, followed by the specific procedures performed, the study design, and the completeness of the protocol form. Infrequently mentioned topics were alternatives to animal use or painful or distressful procedures, the importance of the research, and preliminary data. Not all of the topics required to be considered by the IACUC were openly discussed for all protocols, and many of the discussions were limited in their depth. PMID:26224439

Toward fidelity between specification and implementation

NASA Technical Reports Server (NTRS)

Callahan, John R.; Montgomery, Todd L.; Morrison, Jeff; Wu, Yunqing

1994-01-01

This paper describes the methods used to specify and implement a complex communications protocol that provides reliable delivery of data in multicast-capable, packet-switching telecommunication networks. The protocol, called the Reliable Multicasting Protocol (RMP), was developed incrementally by two complementary teams using a combination of formal and informal techniques in an attempt to ensure the correctness of the protocol implementation. The first team, called the Design team, initially specified protocol requirements using a variant of SCR requirements tables and implemented a prototype solution. The second team, called the V&V team, developed a state model based on the requirements tables and derived test cases from these tables to exercise the implementation. In a series of iterative steps, the Design team added new functionality to the implementation while the V&V team kept the state model in fidelity with the implementation through testing. Test cases derived from state transition paths in the formal model formed the dialogue between teams during development and served as the vehicles for keeping the model and implementation in fidelity with each other. This paper describes our experiences in developing our process model, details of our approach, and some example problems found during the development of RMP.

Development and implementation of clinical trial protocol templates at the National Institute of Allergy and Infectious Diseases.

PubMed

Bridge, Heather; Smolskis, Mary; Bianchine, Peter; Dixon, Dennis O; Kelly, Grace; Herpin, Betsey; Tavel, Jorge

2009-08-01

A clinical research protocol document must reflect both sound scientific rationale as well as local, national and, when applicable, international regulatory and human subject protections requirements. These requirements originate from a variety of sources, undergo frequent revision and are subject to interpretation. Tools to assist clinical investigators in the production of clinical protocols could facilitate navigating these requirements and ultimately increase the efficiency of clinical research. The National Institute of Allergy and Infectious Diseases (NIAID) developed templates for investigators to serve as the foundation for protocol development. These protocol templates are designed as tools to support investigators in developing clinical protocols. NIAID established a series of working groups to determine how to improve its capacity to conduct clinical research more efficiently and effectively. The Protocol Template Working Group was convened to determine what protocol templates currently existed within NIAID and whether standard NIAID protocol templates should be produced. After review and assessment of existing protocol documents and requirements, the group reached consensus about required and optional content, determined the format and identified methods for distribution as well as education of investigators in the use of these templates. The templates were approved by the NIAID Executive Committee in 2006 and posted as part of the NIAID Clinical Research Toolkit [1] website for broad access. These documents require scheduled revisions to stay current with regulatory and policy changes. The structure of any clinical protocol template, whether comprehensive or specific to a particular study phase, setting or design, affects how it is used by investigators. Each structure presents its own set of advantages and disadvantages. While useful, protocol templates are not stand-alone tools for creating an optimal protocol document, but must be complemented by institutional resources and support. Education and guidance of investigators in the appropriate use of templates is necessary to ensure a complete yet concise protocol document. Due to changing regulatory requirements, clinical protocol templates cannot become static, but require frequent revisions.

Enhancer scanning to locate regulatory regions in genomic loci

PubMed Central

Buckley, Melissa; Gjyshi, Anxhela; Mendoza-Fandiño, Gustavo; Baskin, Rebekah; Carvalho, Renato S.; Carvalho, Marcelo A.; Woods, Nicholas T.; Monteiro, Alvaro N.A.

2016-01-01

The present protocol provides a rapid, streamlined and scalable strategy to systematically scan genomic regions for the presence of transcriptional regulatory regions active in a specific cell type. It creates genomic tiles spanning a region of interest that are subsequently cloned by recombination into a luciferase reporter vector containing the Simian Virus 40 promoter. Tiling clones are transfected into specific cell types to test for the presence of transcriptional regulatory regions. The protocol includes testing of different SNP (single nucleotide polymorphism) alleles to determine their effect on regulatory activity. This procedure provides a systematic framework to identify candidate functional SNPs within a locus during functional analysis of genome-wide association studies. This protocol adapts and combines previous well-established molecular biology methods to provide a streamlined strategy, based on automated primer design and recombinational cloning to rapidly go from a genomic locus to a set of candidate functional SNPs in eight weeks. PMID:26658467

TU-A-201-02: Treatment Site-Specific Considerations for Clinical IGRT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wijesooriya, K.

2016-06-15

Recent years have seen a widespread proliferation of available in-room image guidance systems for radiation therapy target localization with many centers having multiple in-room options. In this session, available imaging systems for in-room IGRT will be reviewed highlighting the main differences in workflow efficiency, targeting accuracy and image quality as it relates to target visualization. Decision-making strategies for integrating these tools into clinical image guidance protocols that are tailored to specific disease sites like H&N, lung, pelvis, and spine SBRT will be discussed. Learning Objectives: Major system characteristics of a wide range of available in-room imaging systems for IGRT. Advantagesmore » / disadvantages of different systems for site-specific IGRT considerations. Concepts of targeting accuracy and time efficiency in designing clinical imaging protocols.« less

Guidelines for Inclusion of Patient-Reported Outcomes in Clinical Trial Protocols: The SPIRIT-PRO Extension.

PubMed

Calvert, Melanie; Kyte, Derek; Mercieca-Bebber, Rebecca; Slade, Anita; Chan, An-Wen; King, Madeleine T; Hunn, Amanda; Bottomley, Andrew; Regnault, Antoine; Chan, An-Wen; Ells, Carolyn; O'Connor, Daniel; Revicki, Dennis; Patrick, Donald; Altman, Doug; Basch, Ethan; Velikova, Galina; Price, Gary; Draper, Heather; Blazeby, Jane; Scott, Jane; Coast, Joanna; Norquist, Josephine; Brown, Julia; Haywood, Kirstie; Johnson, Laura Lee; Campbell, Lisa; Frank, Lori; von Hildebrand, Maria; Brundage, Michael; Palmer, Michael; Kluetz, Paul; Stephens, Richard; Golub, Robert M; Mitchell, Sandra; Groves, Trish

2018-02-06

Patient-reported outcome (PRO) data from clinical trials can provide valuable evidence to inform shared decision making, labeling claims, clinical guidelines, and health policy; however, the PRO content of clinical trial protocols is often suboptimal. The SPIRIT (Standard Protocol Items: Recommendations for Interventional Trials) statement was published in 2013 and aims to improve the completeness of trial protocols by providing evidence-based recommendations for the minimum set of items to be addressed, but it does not provide PRO-specific guidance. To develop international, consensus-based, PRO-specific protocol guidance (the SPIRIT-PRO Extension). The SPIRIT-PRO Extension was developed following the Enhancing Quality and Transparency of Health Research (EQUATOR) Network's methodological framework for guideline development. This included (1) a systematic review of existing PRO-specific protocol guidance to generate a list of potential PRO-specific protocol items (published in 2014); (2) refinements to the list and removal of duplicate items by the International Society for Quality of Life Research (ISOQOL) Protocol Checklist Taskforce; (3) an international stakeholder survey of clinical trial research personnel, PRO methodologists, health economists, psychometricians, patient advocates, funders, industry representatives, journal editors, policy makers, ethicists, and researchers responsible for evidence synthesis (distributed by 38 international partner organizations in October 2016); (4) an international Delphi exercise (n = 137 invited; October 2016 to February 2017); and (5) consensus meeting (n = 30 invited; May 2017). Prior to voting, consensus meeting participants were informed of the results of the Delphi exercise and given data from structured reviews evaluating the PRO protocol content of 3 defined samples of trial protocols. The systematic review identified 162 PRO-specific protocol recommendations from 54 sources. The ISOQOL Taskforce (n = 21) reduced this to 56 items, which were considered by 138 international stakeholder survey participants and 99 Delphi panelists. The final wording of the SPIRIT-PRO Extension was agreed on at a consensus meeting (n = 29 participants) and reviewed by external group of experts during a consultation period. Eleven extensions and 5 elaborations to the SPIRIT 2013 checklist were recommended for inclusion in clinical trial protocols in which PROs are a primary or key secondary outcome. Extension items focused on PRO-specific issues relating to the trial rationale, objectives, eligibility criteria, concepts used to evaluate the intervention, time points for assessment, PRO instrument selection and measurement properties, data collection plan, translation to other languages, proxy completion, strategies to minimize missing data, and whether PRO data will be monitored during the study to inform clinical care. The SPIRIT-PRO guidelines provide recommendations for items that should be addressed and included in clinical trial protocols in which PROs are a primary or key secondary outcome. Improved design of clinical trials including PROs could help ensure high-quality data that may inform patient-centered care.

High speed bus technology development

NASA Astrophysics Data System (ADS)

Modrow, Marlan B.; Hatfield, Donald W.

1989-09-01

The development and demonstration of the High Speed Data Bus system, a 50 Million bits per second (Mbps) local data network intended for avionics applications in advanced military aircraft is described. The Advanced System Avionics (ASA)/PAVE PILLAR program provided the avionics architecture concept and basic requirements. Designs for wire and fiber optic media were produced and hardware demonstrations were performed. An efficient, robust token-passing protocol was developed and partially demonstrated. The requirements specifications, the trade-offs made, and the resulting designs for both a coaxial wire media system and a fiber optics design are examined. Also, the development of a message-oriented media access protocol is described, from requirements definition through analysis, simulation and experimentation. Finally, the testing and demonstrations conducted on the breadboard and brassboard hardware is presented.

Methodology for the specification of communication activities within the framework of a multi-layered architecture: Toward the definition of a knowledge base

NASA Astrophysics Data System (ADS)

Amyay, Omar

A method defined in terms of synthesis and verification steps is presented. The specification of the services and protocols of communication within a multilayered architecture of the Open Systems Interconnection (OSI) type is an essential issue for the design of computer networks. The aim is to obtain an operational specification of the protocol service couple of a given layer. Planning synthesis and verification steps constitute a specification trajectory. The latter is based on the progressive integration of the 'initial data' constraints and verification of the specification originating from each synthesis step, through validity constraints that characterize an admissible solution. Two types of trajectories are proposed according to the style of the initial specification of the service protocol couple: operational type and service supplier viewpoint; knowledge property oriented type and service viewpoint. Synthesis and verification activities were developed and formalized in terms of labeled transition systems, temporal logic and epistemic logic. The originality of the second specification trajectory and the use of the epistemic logic are shown. An 'artificial intelligence' approach enables a conceptual model to be defined for a knowledge base system for implementing the method proposed. It is structured in three levels of representation of the knowledge relating to the domain, the reasoning characterizing synthesis and verification activities and the planning of the steps of a specification trajectory.

Movement towards transdiagnostic psychotherapeutic practices for the affective disorders.

PubMed

Gros, Daniel F; Allan, Nicholas P; Szafranski, Derek D

2016-08-01

Evidence-based cognitive behavioural therapy (CBT) practices were first developed in the 1960s. Over the decades, refinements and alternative symptom foci resulted in the development of several CBT protocols/manuals for each of the many disorders, especially in the affective disorders. Although shown to be effective in highly trained providers, the proliferation of CBT protocols also has shown to demonstrate challenges in dissemination and implementation efforts due to the sheer number of CBT protocols and their related training requirements (eg, 6 months per protocol) and their related cost (eg, over US$2000 each; lost days/hours at work). To address these concerns, newer transdiagnostic CBT protocols have been developed to reduce the number of disorder-specific CBT protocols needed to treat patients with affective disorders. Transdiagnostic treatments are based on the notion that various disorder-specific CBT protocols contain important but overlapping treatment components that can be distilled into a single treatment and therefore address the symptoms and comorbidities across all of the disorders at once. 3 examples of transdiagnostic treatments include group CBT of anxiety, unified protocol for transdiagnostic treatment for emotional disorders and transdiagnostic behaviour therapy. Each transdiagnostic protocol is designed for a different set of disorders, contains a varied amount of CBT treatment components and is tested in different types of samples. However, together, these 3 transdiagnostic psychotherapies represent the future of CBT practice. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

A core-shell column approach to a comprehensive high-performance liquid chromatography phenolic analysis of Vitis vinifera L. and interspecific hybrid grape juices, wines, and other matrices following either solid phase extraction or direct injection.

PubMed

Manns, David C; Mansfield, Anna Katharine

2012-08-17

Four high-throughput reverse-phase chromatographic protocols utilizing two different core-shell column chemistries have been developed to analyze the phenolic profiles of complex matrices, specifically targeting juices and wines produced from interspecific hybrid grape cultivars. Following pre-fractionation via solid-phase extraction or direct injection, individual protocols were designed to resolve, identify and quantify specific chemical classes of compounds including non-anthocyanin monomeric phenolics, condensed tannins following acid hydrolysis, and anthocyanins. Detection levels ranging from 1.2 ppb to 27.5 ppb, analyte %RSDs ranging from 0.04 to 0.38, and linear ranges of quantitation approaching five orders of magnitude were achieved using conventional HPLC instrumentation. Using C(18) column chemistry, the non-anthocyanin monomeric protocol effectively separated a set of 16 relevant phenolic compounds comprised flavan-3-ols, hydroxycinnamic acids, and flavonols in under 14 min. The same column was used to develop a 15-min protocol for hydrolyzed condensed tannin analysis. Two anthocyanin protocols are presented, one utilizing the same C(18) column, best suited for anthocyanidin and monoglucoside analysis, the other utilizing a pentafluorophenyl chemistry optimized to effectively separate complex mixtures of coexisting mono- and diglucoside anthocyanins. These protocols and column chemistries have been used initially to explore a wide variety of complex phenolic matrices, including red and white juices and wines produced from Vitis vinifera and interspecific hybrid grape cultivars, juices, teas, and plant extracts. Each protocol displayed robust matrix responses as written, yet are flexible enough to be easily modified to suit specifically tailored analytical requirements. Copyright © 2012 Elsevier B.V. All rights reserved.

Standards for Environmental Measurement Using GIS: Toward a Protocol for Protocols.

PubMed

Forsyth, Ann; Schmitz, Kathryn H; Oakes, Michael; Zimmerman, Jason; Koepp, Joel

2006-02-01

Interdisciplinary research regarding how the built environment influences physical activity has recently increased. Many research projects conducted jointly by public health and environmental design professionals are using geographic information systems (GIS) to objectively measure the built environment. Numerous methodological issues remain, however, and environmental measurements have not been well documented with accepted, common definitions of valid, reliable variables. This paper proposes how to create and document standardized definitions for measures of environmental variables using GIS with the ultimate goal of developing reliable, valid measures. Inherent problems with software and data that hamper environmental measurement can be offset by protocols combining clear conceptual bases with detailed measurement instructions. Examples demonstrate how protocols can more clearly translate concepts into specific measurement. This paper provides a model for developing protocols to allow high quality comparative research on relationships between the environment and physical activity and other outcomes of public health interest.

Rationale, Scenarios, and Profiles for the Application of the Internet Protocol Suite (IPS) in Space Operations

NASA Technical Reports Server (NTRS)

Benbenek, Daniel B.; Walsh, William

2010-01-01

This greenbook captures some of the current, planned and possible future uses of the Internet Protocol (IP) as part of Space Operations. It attempts to describe how the Internet Protocol is used in specific scenarios. Of primary focus is low-earth-orbit space operations, which is referred to here as the design reference mission (DRM). This is because most of the program experience drawn upon derives from this type of mission. Application profiles are provided. This includes parameter settings programs have proposed for sending IP datagrams over CCSDS links, the minimal subsets and features of the IP protocol suite and applications expected for interoperability between projects, and the configuration, operations and maintenance of these IP functions. Of special interest is capturing the lessons learned from the Constellation Program in this area, since that program included a fairly ambitious use of the Internet Protocol.

Protocols for efficient simulations of long-time protein dynamics using coarse-grained CABS model.

PubMed

Jamroz, Michal; Kolinski, Andrzej; Kmiecik, Sebastian

2014-01-01

Coarse-grained (CG) modeling is a well-acknowledged simulation approach for getting insight into long-time scale protein folding events at reasonable computational cost. Depending on the design of a CG model, the simulation protocols vary from highly case-specific-requiring user-defined assumptions about the folding scenario-to more sophisticated blind prediction methods for which only a protein sequence is required. Here we describe the framework protocol for the simulations of long-term dynamics of globular proteins, with the use of the CABS CG protein model and sequence data. The simulations can start from a random or a selected (e.g., native) structure. The described protocol has been validated using experimental data for protein folding model systems-the prediction results agreed well with the experimental results.

Water quality monitoring protocol for wadeable streams and rivers in the Northern Great Plains Network

USGS Publications Warehouse

Wilson, Marcia H.; Rowe, Barbara L.; Gitzen, Robert A.; Wilson, Stephen K.; Paintner-Green, Kara J.

2014-01-01

As recommended by Oakley et al. (2003), this protocol provides a narrative and the rationale for selection of streams and rivers within the NGPN that will be measured for water quality, including dissolved oxygen, pH, specific conductivity, and temperature. Standard operating procedures (SOPs) that detail the steps to collect, manage, and disseminate the NGPN water quality data are in an accompanying document. The sampling design documented in this protocol may be updated as monitoring information is collected and interpreted, and as refinement of methodologies develop through time. In addition, evaluation of data and refinement of the program may necessitate potential changes of program objectives. Changes to the NGPN water quality protocols and SOPs will be carefully documented in a revision history log.

Energy modelling in sensor networks

NASA Astrophysics Data System (ADS)

Schmidt, D.; Krämer, M.; Kuhn, T.; Wehn, N.

2007-06-01

Wireless sensor networks are one of the key enabling technologies for the vision of ambient intelligence. Energy resources for sensor nodes are very scarce. A key challenge is the design of energy efficient communication protocols. Models of the energy consumption are needed to accurately simulate the efficiency of a protocol or application design, and can also be used for automatic energy optimizations in a model driven design process. We propose a novel methodology to create models for sensor nodes based on few simple measurements. In a case study the methodology was used to create models for MICAz nodes. The models were integrated in a simulation environment as well as in a SDL runtime framework of a model driven design process. Measurements on a test application that was created automatically from an SDL specification showed an 80% reduction in energy consumption compared to an implementation without power saving strategies.

Chapter 12: Survey Design and Implementation for Estimating Gross Savings Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W; Baumgartner, Robert

This chapter presents an overview of best practices for designing and executing survey research to estimate gross energy savings in energy efficiency evaluations. A detailed description of the specific techniques and strategies for designing questions, implementing a survey, and analyzing and reporting the survey procedures and results is beyond the scope of this chapter. So for each topic covered below, readers are encouraged to consult articles and books cited in References, as well as other sources that cover the specific topics in greater depth. This chapter focuses on the use of survey methods to collect data for estimating gross savingsmore » from energy efficiency programs.« less

Effectiveness of Serious Games for Leap Motion on the Functionality of the Upper Limb in Parkinson's Disease: A Feasibility Study.

PubMed

Oña, Edwin Daniel; Balaguer, Carlos; Cano-de la Cuerda, Roberto; Collado-Vázquez, Susana; Jardón, Alberto

2018-01-01

The design and application of Serious Games (SG) based on the Leap Motion sensor are presented as a tool to support the rehabilitation therapies for upper limbs. Initially, the design principles and their implementation are described, focusing on improving both unilateral and bilateral manual dexterity and coordination. The design of the games has been supervised by specialized therapists. To assess the therapeutic effectiveness of the proposed system, a protocol of trials with Parkinson's patients has been defined. Evaluations of the physical condition of the participants in the study, at the beginning and at the end of the treatment, are carried out using standard tests. The specific measurements of each game give the therapist more detailed information about the patients' evolution after finishing the planned protocol. The obtained results support the fact that the set of developed video games can be combined to define different therapy protocols and that the information obtained is richer than the one obtained through current clinical metrics, serving as method of motor function assessment.

Effectiveness of Serious Games for Leap Motion on the Functionality of the Upper Limb in Parkinson's Disease: A Feasibility Study

PubMed Central

Balaguer, Carlos; Collado-Vázquez, Susana; Jardón, Alberto

2018-01-01

The design and application of Serious Games (SG) based on the Leap Motion sensor are presented as a tool to support the rehabilitation therapies for upper limbs. Initially, the design principles and their implementation are described, focusing on improving both unilateral and bilateral manual dexterity and coordination. The design of the games has been supervised by specialized therapists. To assess the therapeutic effectiveness of the proposed system, a protocol of trials with Parkinson's patients has been defined. Evaluations of the physical condition of the participants in the study, at the beginning and at the end of the treatment, are carried out using standard tests. The specific measurements of each game give the therapist more detailed information about the patients' evolution after finishing the planned protocol. The obtained results support the fact that the set of developed video games can be combined to define different therapy protocols and that the information obtained is richer than the one obtained through current clinical metrics, serving as method of motor function assessment. PMID:29849550

A formal protocol test procedure for the Survivable Adaptable Fiber Optic Embedded Network (SAFENET)

NASA Astrophysics Data System (ADS)

High, Wayne

1993-03-01

This thesis focuses upon a new method for verifying the correct operation of a complex, high speed fiber optic communication network. These networks are of growing importance to the military because of their increased connectivity, survivability, and reconfigurability. With the introduction and increased dependence on sophisticated software and protocols, it is essential that their operation be correct. Because of the speed and complexity of fiber optic networks being designed today, they are becoming increasingly difficult to test. Previously, testing was accomplished by application of conformance test methods which had little connection with an implementation's specification. The major goal of conformance testing is to ensure that the implementation of a profile is consistent with its specification. Formal specification is needed to ensure that the implementation performs its intended operations while exhibiting desirable behaviors. The new conformance test method presented is based upon the System of Communicating Machine model which uses a formal protocol specification to generate a test sequence. The major contribution of this thesis is the application of the System of Communicating Machine model to formal profile specifications of the Survivable Adaptable Fiber Optic Embedded Network (SAFENET) standard which results in the derivation of test sequences for a SAFENET profile. The results applying this new method to SAFENET's OSI and Lightweight profiles are presented.

Preparation Prerequisites for Effective Irrigation of Apical Root Canal: A Critical Review.

PubMed

Tziafas, Dimitrios; Alraeesi, Dana; Al Hormoodi, Reem; Ataya, Maamoun; Fezai, Hessa; Aga, Nausheen

2017-10-01

It is well recognized that disinfection of the complex root canal system at the apical root canal remains the most critical therapeutic measure to treat apical periodontitis. Observational and experimental data in relation to the anatomy of the apical root canal in different tooth types and the cross sectional diameters of the apical part of the most commonly used hand and rotary files are critically reviewed. The present data analysis confirm that the challenging issue of antibacterial efficacy of modern preparation protocols in non-surgical endodontics requires more attention to apical root canal irrigation as a balance between safety and effectiveness. Ex vivo investigations clearly indicate that a specific design of the chemo-mechanical preparation is needed at the onset of RCT, more particularly in infected teeth. Design should be based on specific anatomical parameters, and must determine the appropriate size and taper of preparation as pre-requirements for effective and safe apical irrigation. The optimal irrigation protocols might be designed on the basis of technical specifications of the preparations procedures, such as the penetration depth, the type of the needle, the required time for continuous irrigant flow, the concentration of NaOCl, and the activation parameters. Key words: Endodontics, root canal treatment, instrumentation, irrigation, apical root canal.

Wireless Communications in Space

NASA Technical Reports Server (NTRS)

2004-01-01

In 1992, NASA and the U.S. Department of Defense jointly commissioned the research and development of a technology solution to address the challenges and requirements of communicating with their spacecraft. The project yielded an international consortium composed of representatives from the space science community, industry, and academia. This group of experts developed a broad suite of protocols specifically designed for space-based communications, known today as Space Communications Protocol Standards (SCPS). Having been internationally standardized by the Consultative Committee on Space Data Systems and the International Standards Organization, SCPS is distributed as open source technology by NASA s Jet Propulsion Laboratory (JPL). The protocols are used for every national space mission that takes place today.

SAMP, the Simple Application Messaging Protocol: Letting applications talk to each other

NASA Astrophysics Data System (ADS)

Taylor, M. B.; Boch, T.; Taylor, J.

2015-06-01

SAMP, the Simple Application Messaging Protocol, is a hub-based communication standard for the exchange of data and control between participating client applications. It has been developed within the context of the Virtual Observatory with the aim of enabling specialised data analysis tools to cooperate as a loosely integrated suite, and is now in use by many and varied desktop and web-based applications dealing with astronomical data. This paper reviews the requirements and design principles that led to SAMP's specification, provides a high-level description of the protocol, and discusses some of its common and possible future usage patterns, with particular attention to those factors that have aided its success in practice.

Internet Technology for Future Space Missions

NASA Technical Reports Server (NTRS)

Hennessy, Joseph F. (Technical Monitor); Rash, James; Casasanta, Ralph; Hogie, Keith

2002-01-01

Ongoing work at National Aeronautics and Space Administration Goddard Space Flight Center (NASA/GSFC), seeks to apply standard Internet applications and protocols to meet the technology challenge of future satellite missions. Internet protocols and technologies are under study as a future means to provide seamless dynamic communication among heterogeneous instruments, spacecraft, ground stations, constellations of spacecraft, and science investigators. The primary objective is to design and demonstrate in the laboratory the automated end-to-end transport of files in a simulated dynamic space environment using off-the-shelf, low-cost, commodity-level standard applications and protocols. The demonstrated functions and capabilities will become increasingly significant in the years to come as both earth and space science missions fly more sensors and the present labor-intensive, mission-specific techniques for processing and routing data become prohibitively. This paper describes how an IP-based communication architecture can support all existing operations concepts and how it will enable some new and complex communication and science concepts. The authors identify specific end-to-end data flows from the instruments to the control centers and scientists, and then describe how each data flow can be supported using standard Internet protocols and applications. The scenarios include normal data downlink and command uplink as well as recovery scenarios for both onboard and ground failures. The scenarios are based on an Earth orbiting spacecraft with downlink data rates from 300 Kbps to 4 Mbps. Included examples are based on designs currently being investigated for potential use by the Global Precipitation Measurement (GPM) mission.

A survey on routing protocols for large-scale wireless sensor networks.

PubMed

Li, Changle; Zhang, Hanxiao; Hao, Binbin; Li, Jiandong

2011-01-01

With the advances in micro-electronics, wireless sensor devices have been made much smaller and more integrated, and large-scale wireless sensor networks (WSNs) based the cooperation among the significant amount of nodes have become a hot topic. "Large-scale" means mainly large area or high density of a network. Accordingly the routing protocols must scale well to the network scope extension and node density increases. A sensor node is normally energy-limited and cannot be recharged, and thus its energy consumption has a quite significant effect on the scalability of the protocol. To the best of our knowledge, currently the mainstream methods to solve the energy problem in large-scale WSNs are the hierarchical routing protocols. In a hierarchical routing protocol, all the nodes are divided into several groups with different assignment levels. The nodes within the high level are responsible for data aggregation and management work, and the low level nodes for sensing their surroundings and collecting information. The hierarchical routing protocols are proved to be more energy-efficient than flat ones in which all the nodes play the same role, especially in terms of the data aggregation and the flooding of the control packets. With focus on the hierarchical structure, in this paper we provide an insight into routing protocols designed specifically for large-scale WSNs. According to the different objectives, the protocols are generally classified based on different criteria such as control overhead reduction, energy consumption mitigation and energy balance. In order to gain a comprehensive understanding of each protocol, we highlight their innovative ideas, describe the underlying principles in detail and analyze their advantages and disadvantages. Moreover a comparison of each routing protocol is conducted to demonstrate the differences between the protocols in terms of message complexity, memory requirements, localization, data aggregation, clustering manner and other metrics. Finally some open issues in routing protocol design in large-scale wireless sensor networks and conclusions are proposed.

A Survey on Routing Protocols for Large-Scale Wireless Sensor Networks

PubMed Central

Li, Changle; Zhang, Hanxiao; Hao, Binbin; Li, Jiandong

2011-01-01

With the advances in micro-electronics, wireless sensor devices have been made much smaller and more integrated, and large-scale wireless sensor networks (WSNs) based the cooperation among the significant amount of nodes have become a hot topic. “Large-scale” means mainly large area or high density of a network. Accordingly the routing protocols must scale well to the network scope extension and node density increases. A sensor node is normally energy-limited and cannot be recharged, and thus its energy consumption has a quite significant effect on the scalability of the protocol. To the best of our knowledge, currently the mainstream methods to solve the energy problem in large-scale WSNs are the hierarchical routing protocols. In a hierarchical routing protocol, all the nodes are divided into several groups with different assignment levels. The nodes within the high level are responsible for data aggregation and management work, and the low level nodes for sensing their surroundings and collecting information. The hierarchical routing protocols are proved to be more energy-efficient than flat ones in which all the nodes play the same role, especially in terms of the data aggregation and the flooding of the control packets. With focus on the hierarchical structure, in this paper we provide an insight into routing protocols designed specifically for large-scale WSNs. According to the different objectives, the protocols are generally classified based on different criteria such as control overhead reduction, energy consumption mitigation and energy balance. In order to gain a comprehensive understanding of each protocol, we highlight their innovative ideas, describe the underlying principles in detail and analyze their advantages and disadvantages. Moreover a comparison of each routing protocol is conducted to demonstrate the differences between the protocols in terms of message complexity, memory requirements, localization, data aggregation, clustering manner and other metrics. Finally some open issues in routing protocol design in large-scale wireless sensor networks and conclusions are proposed. PMID:22163808

DARPA Internet Program. Internet and Transmission Control Specifications,

DTIC Science & Technology

1981-09-01

Internet Program Protocol Specification", RFC 791, USC/ Information Sciences Institute, September 1981. [34] Postel, J., ed., "Transmission Control Protocol...DARPA Internet Program Protocol Specification", RFC 793, USC/ Information Sciences Institute, September 1981. [35] Postel, J., "Echo Process", RFC 347...Newman, March 1981. [53] Postel, J., " Internet Control Message Protocol - DARPA Internet Program Protocol Specification", RFC 792, USC/ Information

Environmental DNA as a Tool for Inventory and Monitoring of Aquatic Vertebrates

DTIC Science & Technology

2017-07-01

geomorphic calculations and description of each reach. Methods Channel Surveys We initially selected reaches based on access and visual indicators...WA 99164 I-2 Environmental DNA lab protocol: designing species-specific qPCR assays Species-specific surveys should use quantitative polymerase...to traditional field sampling with respect to sensitivity, detection probabilities, and cost efficiency. Compared to field surveys , eDNA sampling

Design of durability test protocol for vehicular fuel cell systems operated in power-follow mode based on statistical results of on-road data

NASA Astrophysics Data System (ADS)

Xu, Liangfei; Reimer, Uwe; Li, Jianqiu; Huang, Haiyan; Hu, Zunyan; Jiang, Hongliang; Janßen, Holger; Ouyang, Minggao; Lehnert, Werner

2018-02-01

City buses using polymer electrolyte membrane (PEM) fuel cells are considered to be the most likely fuel cell vehicles to be commercialized in China. The technical specifications of the fuel cell systems (FCSs) these buses are equipped with will differ based on the powertrain configurations and vehicle control strategies, but can generally be classified into the power-follow and soft-run modes. Each mode imposes different levels of electrochemical stress on the fuel cells. Evaluating the aging behavior of fuel cell stacks under the conditions encountered in fuel cell buses requires new durability test protocols based on statistical results obtained during actual driving tests. In this study, we propose a systematic design method for fuel cell durability test protocols that correspond to the power-follow mode based on three parameters for different fuel cell load ranges. The powertrain configurations and control strategy are described herein, followed by a presentation of the statistical data for the duty cycles of FCSs in one city bus in the demonstration project. Assessment protocols are presented based on the statistical results using mathematical optimization methods, and are compared to existing protocols with respect to common factors, such as time at open circuit voltage and root-mean-square power.

Developing Intranets: Practical Issues for Implementation and Design.

ERIC Educational Resources Information Center

Trowbridge, Dave

1996-01-01

An intranet is a system which has "domesticated" the technologies of the Internet for specific organizational settings and goals. Although the adaptability of Hypertext Markup Language to intranets is sometimes limited, implementing various protocols and technologies enable organizations to share files among heterogeneous computers,…

Simplified Protocol for Carba NP Test for Enhanced Detection of Carbapenemase Producers Directly from Bacterial Cultures

PubMed Central

Pasteran, Fernando; Tijet, Nathalie; Melano, Roberto G.

2015-01-01

We compared carbapenemase detection among 266 Gram-negative bacilli (161 carbapenemase producers) using the Carba NP tests issued by the CLSI (CNPt-CLSI) and a novel protocol (CNPt-direct) designed for carbapenemase detection direct from bacterial cultures (instead of bacterial extracts required by the CLSI tests). The specificities were comparable (100%), but the CNPt-direct was more sensitive (98% versus 84%). The CNPt-direct was easier to perform due to the direct use of colonies and offered a more robust detection of carbapenemase producers. PMID:26424841

FTP Extensions for Variable Protocol Specification

NASA Technical Reports Server (NTRS)

Allman, Mark; Ostermann, Shawn

2000-01-01

The specification for the File Transfer Protocol (FTP) assumes that the underlying network protocols use a 32-bit network address and a 16-bit transport address (specifically IP version 4 and TCP). With the deployment of version 6 of the Internet Protocol, network addresses will no longer be 32-bits. This paper species extensions to FTP that will allow the protocol to work over a variety of network and transport protocols.

Design and assessment of engineered CRISPR-Cpf1 and its use for genome editing.

PubMed

Li, Bin; Zeng, Chunxi; Dong, Yizhou

2018-05-01

Cpf1, a CRISPR endonuclease discovered in Prevotella and Francisella 1 bacteria, offers an alternative platform for CRISPR-based genome editing beyond the commonly used CRISPR-Cas9 system originally discovered in Streptococcus pyogenes. This protocol enables the design of engineered CRISPR-Cpf1 components, both CRISPR RNAs (crRNAs) to guide the endonuclease and Cpf1 mRNAs to express the endonuclease protein, and provides experimental procedures for effective genome editing using this system. We also describe quantification of genome-editing activity and off-target effects of the engineered CRISPR-Cpf1 in human cell lines using both T7 endonuclease I (T7E1) assay and targeted deep sequencing. This protocol enables rapid construction and identification of engineered crRNAs and Cpf1 mRNAs to enhance genome-editing efficiency using the CRISPR-Cpf1 system, as well as assessment of target specificity within 2 months. This protocol may also be appropriate for fine-tuning other types of CRISPR systems.

Effects of air speed and liquid temperature on droplet size

USDA-ARS?s Scientific Manuscript database

Advancements in both application hardware (e.g. nozzles and spray assist devices) and spray modification products have led to a number of products that are specifically designed to maximize the spray deposition and minimize off-target. Testing protocols are being developed to objectively measure sp...

PNA-COMBO-FISH: From combinatorial probe design in silico to vitality compatible, specific labelling of gene targets in cell nuclei

DOE Office of Scientific and Technical Information (OSTI.GOV)

Müller, Patrick; Rößler, Jens; Schwarz-Finsterle, Jutta

Recently, advantages concerning targeting specificity of PCR constructed oligonucleotide FISH probes in contrast to established FISH probes, e.g. BAC clones, have been demonstrated. These techniques, however, are still using labelling protocols with DNA denaturing steps applying harsh heat treatment with or without further denaturing chemical agents. COMBO-FISH (COMBinatorial Oligonucleotide FISH) allows the design of specific oligonucleotide probe combinations in silico. Thus, being independent from primer libraries or PCR laboratory conditions, the probe sequences extracted by computer sequence data base search can also be synthesized as single stranded PNA-probes (Peptide Nucleic Acid probes). Gene targets can be specifically labelled with atmore » least about 20 PNA-probes obtaining visibly background free specimens. By using appropriately designed triplex forming oligonucleotides, the denaturing procedures can completely be omitted. These results reveal a significant step towards oligonucleotide-FISH maintaining the 3D-nanostructure and even the viability of the cell target. The method is demonstrated with the detection of Her2/neu and GRB7 genes, which are indicators in breast cancer diagnosis and therapy. - Highlights: • Denaturation free protocols preserve 3D architecture of chromosomes and nuclei. • Labelling sets are determined in silico for duplex and triplex binding. • Probes are produced chemically with freely chosen backbones and base variants. • Peptide nucleic acid backbones reduce hindering charge interactions. • Intercalating side chains stabilize binding of short oligonucleotides.« less

Bank robberies: A psychological protocol of intervention in financial institutions and principal effects.

PubMed

Tabanelli, Maria Carla; Bonfiglioli, Roberta; Violante, Francesco S

2013-03-26

BACKGROUND: Robbery in workplaces represents a potentially traumatic experience for workers. OBJECTIVES: This article describes the set up and evaluation of a comprehensive psychological intervention designed to help to reduce the adverse consequences of bank robberies. PARTICIPANTS: The study population was selected among the employees of two Italian banks.METHODS: The psychological protocol was designed according to the results of a comprehensive non-systematic review of the scientific literature and it was evaluated at work site. RESULTS: The protocol consists of a "pre-event" formative intervention and "post-event" psychological support. The qualitative data collected allowed us to understand that the reactions after a robbery can differ depending on the phase during which the workers were exposed to the robbery. We noted that the main consequences can be classified in emotional/sentimental reactions, behavioral reactions, physiological reactions and experiences during the event; emotions/feelings following the robbery and psycho/physical state and emotions/feelings in the following days.CONCLUSIONS: In a working environment, the chance to take advantage of a specific protocol for the traumatic event of a bank robbery offers both the company and the workers important tools for well-being, including post-robbery psychological support and classroom instructions.

Reliable communication in the presence of failures

NASA Technical Reports Server (NTRS)

Birman, Kenneth P.; Joseph, Thomas A.

1987-01-01

The design and correctness of a communication facility for a distributed computer system are reported on. The facility provides support for fault-tolerant process groups in the form of a family of reliable multicast protocols that can be used in both local- and wide-area networks. These protocols attain high levels of concurrency, while respecting application-specific delivery ordering constraints, and have varying cost and performance that depend on the degree of ordering desired. In particular, a protocol that enforces causal delivery orderings is introduced and shown to be a valuable alternative to conventional asynchronous communication protocols. The facility also ensures that the processes belonging to a fault-tolerant process group will observe consistant orderings of events affecting the group as a whole, including process failures, recoveries, migration, and dynamic changes to group properties like member rankings. A review of several uses for the protocols is the ISIS system, which supports fault-tolerant resilient objects and bulletin boards, illustrates the significant simplification of higher level algorithms made possible by our approach.

Interplanetary Overlay Network Bundle Protocol Implementation

NASA Technical Reports Server (NTRS)

Burleigh, Scott C.

2011-01-01

The Interplanetary Overlay Network (ION) system's BP package, an implementation of the Delay-Tolerant Networking (DTN) Bundle Protocol (BP) and supporting services, has been specifically designed to be suitable for use on deep-space robotic vehicles. Although the ION BP implementation is unique in its use of zero-copy objects for high performance, and in its use of resource-sensitive rate control, it is fully interoperable with other implementations of the BP specification (Internet RFC 5050). The ION BP implementation is built using the same software infrastructure that underlies the implementation of the CCSDS (Consultative Committee for Space Data Systems) File Delivery Protocol (CFDP) built into the flight software of Deep Impact. It is designed to minimize resource consumption, while maximizing operational robustness. For example, no dynamic allocation of system memory is required. Like all the other ION packages, ION's BP implementation is designed to port readily between Linux and Solaris (for easy development and for ground system operations) and VxWorks (for flight systems operations). The exact same source code is exercised in both environments. Initially included in the ION BP implementations are the following: libraries of functions used in constructing bundle forwarders and convergence-layer (CL) input and output adapters; a simple prototype bundle forwarder and associated CL adapters designed to run over an IPbased local area network; administrative tools for managing a simple DTN infrastructure built from these components; a background daemon process that silently destroys bundles whose time-to-live intervals have expired; a library of functions exposed to applications, enabling them to issue and receive data encapsulated in DTN bundles; and some simple applications that can be used for system checkout and benchmarking.

Enriching peptide libraries for binding affinity and specificity through computationally directed library design

PubMed Central

Foight, Glenna Wink; Chen, T. Scott; Richman, Daniel; Keating, Amy E.

2017-01-01

Peptide reagents with high affinity or specificity for their target protein interaction partner are of utility for many important applications. Optimization of peptide binding by screening large libraries is a proven and powerful approach. Libraries designed to be enriched in peptide sequences that are predicted to have desired affinity or specificity characteristics are more likely to yield success than random mutagenesis. We present a library optimization method in which the choice of amino acids to encode at each peptide position can be guided by available experimental data or structure-based predictions. We discuss how to use analysis of predicted library performance to inform rounds of library design. Finally, we include protocols for more complex library design procedures that consider the chemical diversity of the amino acids at each peptide position and optimize a library score based on a user-specified input model. PMID:28236241

Enriching Peptide Libraries for Binding Affinity and Specificity Through Computationally Directed Library Design.

PubMed

Foight, Glenna Wink; Chen, T Scott; Richman, Daniel; Keating, Amy E

2017-01-01

Peptide reagents with high affinity or specificity for their target protein interaction partner are of utility for many important applications. Optimization of peptide binding by screening large libraries is a proven and powerful approach. Libraries designed to be enriched in peptide sequences that are predicted to have desired affinity or specificity characteristics are more likely to yield success than random mutagenesis. We present a library optimization method in which the choice of amino acids to encode at each peptide position can be guided by available experimental data or structure-based predictions. We discuss how to use analysis of predicted library performance to inform rounds of library design. Finally, we include protocols for more complex library design procedures that consider the chemical diversity of the amino acids at each peptide position and optimize a library score based on a user-specified input model.

NEW APPROACHES TO ESTIMATION OF SOLID-WASTE QUANTITY AND COMPOSITION

EPA Science Inventory

Efficient and statistically sound sampling protocols for estimating the quantity and composition of solid waste over a stated period of time in a given location, such as a landfill site or at a specific point in an industrial or commercial process, are essential to the design ...

Design of Availability-Dependent Distributed Services in Large-Scale Uncooperative Settings

ERIC Educational Resources Information Center

Morales, Ramses Victor

2009-01-01

Thesis Statement: "Availability-dependent global predicates can be efficiently and scalably realized for a class of distributed services, in spite of specific selfish and colluding behaviors, using local and decentralized protocols". Several types of large-scale distributed systems spanning the Internet have to deal with availability variations…

Increased Content Knowledge of Students with Visual Impairments as a Result of Extended Descriptions

ERIC Educational Resources Information Center

Ely, Richard; Emerson, Robert Wall; Maggiore, Theresa; Rothberg, Madeleine; O'Connell, Trisha; Hudson, Laurel

2006-01-01

The National Center for Accessible Media has developed a technology and protocol for inserting extended, enhanced descriptions of visually based concepts into artificially paused digital video. These "eDescriptions" describe material not fully explained by a narrator and provide analogies and explanation specifically designed for…

Structural Brain Atlases: Design, Rationale, and Applications in Normal and Pathological Cohorts

PubMed Central

Mandal, Pravat K.; Mahajan, Rashima; Dinov, Ivo D.

2015-01-01

Structural magnetic resonance imaging (MRI) provides anatomical information about the brain in healthy as well as in diseased conditions. On the other hand, functional MRI (fMRI) provides information on the brain activity during performance of a specific task. Analysis of fMRI data requires the registration of the data to a reference brain template in order to identify the activated brain regions. Brain templates also find application in other neuroimaging modalities, such as diffusion tensor imaging and multi-voxel spectroscopy. Further, there are certain differences (e.g., brain shape and size) in the brains of populations of different origin and during diseased conditions like in Alzheimer’s disease (AD), population and disease-specific brain templates may be considered crucial for accurate registration and subsequent analysis of fMRI as well as other neuroimaging data. This manuscript provides a comprehensive review of the history, construction and application of brain atlases. A chronological outline of the development of brain template design, starting from the Talairach and Tournoux atlas to the Chinese brain template (to date), along with their respective detailed construction protocols provides the backdrop to this manuscript. The manuscript also provides the automated workflow-based protocol for designing a population-specific brain atlas from structural MRI data using LONI Pipeline graphical workflow environment. We conclude by discussing the scope of brain templates as a research tool and their application in various neuroimaging modalities. PMID:22647262

Hypersensitivity and desensitization to antineoplastic agents: outcomes of 189 procedures with a new short protocol and novel diagnostic tools assessment.

PubMed

Madrigal-Burgaleta, R; Berges-Gimeno, M P; Angel-Pereira, D; Ferreiro-Monteagudo, R; Guillen-Ponce, C; Pueyo, C; Gomez de Salazar, E; Alvarez-Cuesta, E

2013-07-01

Desensitization to antineoplastic agents is becoming a standard of care. Efforts to establish and improve these techniques are being made at many institutions. Our aims are to evaluate a new rapid desensitization protocol designed to be shorter (approximately 4 h) and safer (reducing hazardous drugs exposure risks) and to assess the oxaliplatin-specific immunoglobulin E (IgE) as a novel diagnostic tool. Prospective, observational, longitudinal study with patients who, for a 1-year period, suffered reactions to antineoplastic agents and were referred to the Desensitization Program at Ramon y Cajal University Hospital (RCUH). Patients were included or excluded as desensitization candidates after anamnesis, skin testing, risk assessment, and graded challenge. Specific IgE was determined in oxaliplatin-reactive patients. Candidate patients were desensitized using the new RCUH rapid desensitization protocol. Of 189 intravenous rapid desensitizations, 188 were successfully accomplished in the 23 patients who met inclusion criteria for desensitization (of 58 referred patients). No breakthrough reactions occurred in 94% of desensitizations, and most breakthrough reactions were mild. In 10 oxaliplatin-reactive patients, 38 desensitizations were successfully accomplished. Sensitivity for oxaliplatin-specific IgE was 38% (0.35UI/l cutoff point) and 54% (0.10UI/l cutoff point); specificity was 100% for both cutoff points. In the hands of a Desensitization Program, managed by drug desensitization experts, this new protocol has proven an effective therapeutic tool for hypersensitivity to several antineoplastic agents (oxaliplatin, carboplatin, paclitaxel, docetaxel, cyclophosphamide, and rituximab); moreover, it improves safety handling of hazardous drugs. We report the first large series of oxaliplatin desensitizations. Oxaliplatin-specific IgE determination could be helpful. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Clinically Practical Magnetic Resonance Protocol for Improved Specificity in Breast Cancer Diagnosis

DTIC Science & Technology

2007-06-01

Protocol for Improved Specificity in Breast Cancer Diagnosis PRINCIPAL INVESTIGATOR: Luminita Alina Tudorica, Ph.D. CONTRACTING...TITLE AND SUBTITLE 5a. CONTRACT NUMBER Clinically Practical Magnetic Resonance Protocol for Improved Specificity in Breast Cancer Diagnosis 5b... breast cancer study in a clinical setting. This study aims to improve specificity of breast cancer detection by using a combined MRI/MRS protocol. In

An alternative method for processing northern blots after capillary transfer.

PubMed

Nilsen, Timothy W

2015-03-02

Different laboratories use different methods for the prehybridization, hybridization, and washing steps of the northern blotting procedure. In this protocol, a northern blot is pretreated with Church and Gilbert hybridization buffer to block nonspecific probe-binding sites. The immobilized RNA is then hybridized to a DNA probe specific for the RNA of interest. Finally, the membrane is washed and subjected to autoradiography or phosphorimaging. The solutions and conditions described here may be ideal for those who prefer to use fewer ingredients in their solutions. This protocol is designed to achieve the same goals as other northern blotting approaches. It minimizes background (nonspecific adherence of probe to membrane and nonspecific hybridization) and maximizes specific hybridization to RNAs immobilized on a membrane. © 2015 Cold Spring Harbor Laboratory Press.

TU-A-201-01: Introduction to In-Room Imaging System Characteristics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, J.

2016-06-15

Recent years have seen a widespread proliferation of available in-room image guidance systems for radiation therapy target localization with many centers having multiple in-room options. In this session, available imaging systems for in-room IGRT will be reviewed highlighting the main differences in workflow efficiency, targeting accuracy and image quality as it relates to target visualization. Decision-making strategies for integrating these tools into clinical image guidance protocols that are tailored to specific disease sites like H&N, lung, pelvis, and spine SBRT will be discussed. Learning Objectives: Major system characteristics of a wide range of available in-room imaging systems for IGRT. Advantagesmore » / disadvantages of different systems for site-specific IGRT considerations. Concepts of targeting accuracy and time efficiency in designing clinical imaging protocols.« less

TU-A-201-00: Image Guidance Technologies and Management Strategies

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2016-06-15

Recent years have seen a widespread proliferation of available in-room image guidance systems for radiation therapy target localization with many centers having multiple in-room options. In this session, available imaging systems for in-room IGRT will be reviewed highlighting the main differences in workflow efficiency, targeting accuracy and image quality as it relates to target visualization. Decision-making strategies for integrating these tools into clinical image guidance protocols that are tailored to specific disease sites like H&N, lung, pelvis, and spine SBRT will be discussed. Learning Objectives: Major system characteristics of a wide range of available in-room imaging systems for IGRT. Advantagesmore » / disadvantages of different systems for site-specific IGRT considerations. Concepts of targeting accuracy and time efficiency in designing clinical imaging protocols.« less

Network, system, and status software enhancements for the autonomously managed electrical power system breadboard. Volume 1: Project summary

NASA Technical Reports Server (NTRS)

Mckee, James W.

1990-01-01

This volume (1 of 4) gives a summary of the original AMPS software system configuration, points out some of the problem areas in the original software design that this project is to address, and in the appendix collects all the bimonthly status reports. The purpose of AMPS is to provide a self reliant system to control the generation and distribution of power in the space station. The software in the AMPS breadboard can be divided into three levels: the operating environment software, the protocol software, and the station specific software. This project deals only with the operating environment software and the protocol software. The present station specific software will not change except as necessary to conform to new data formats.

Documentation of operational protocol for the use of MAMA software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwartz, Daniel S.

2016-01-21

Image analysis of Scanning Electron Microscope (SEM) micrographs is a complex process that can vary significantly between analysts. The factors causing the variation are numerous, and the purpose of Task 2b is to develop and test a set of protocols designed to minimize variation in image analysis between different analysts and laboratories, specifically using the MAMA software package, Version 2.1. The protocols were designed to be “minimally invasive”, so that expert SEM operators will not be overly constrained in the way they analyze particle samples. The protocols will be tested using a round-robin approach where results from expert SEM usersmore » at Los Alamos National Laboratory, Lawrence Livermore National Laboratory, Pacific Northwest National Laboratory, Savannah River National Laboratory, and the National Institute of Standards and Testing will be compared. The variation of the results will be used to quantify uncertainty in the particle image analysis process. The round-robin exercise will proceed with 3 levels of rigor, each with their own set of protocols, as described below in Tasks 2b.1, 2b.2, and 2b.3. The uncertainty will be developed using NIST standard reference material SRM 1984 “Thermal Spray Powder – Particle Size Distribution, Tungsten Carbide/Cobalt (Acicular)” [Reference 1]. Full details are available in the Certificate of Analysis, posted on the NIST website (http://www.nist.gov/srm/).« less

Development and Implementation of Clinical Trial Protocol Templates at the National Institute of Allergy and Infectious Diseases

PubMed Central

Bridge, Heather; Smolskis, Mary; Bianchine, Peter; Dixon, Dennis O.; Kelly, Grace; Herpin, Betsey; Tavel, Jorge

2009-01-01

Background: A clinical research protocol document must reflect both sound scientific rationale as well as local, national and, when applicable, international regulatory and human subject protections requirements. These requirements originate from a variety of sources, undergo frequent revision and are subject to interpretation. Tools to assist clinical investigators in the production of clinical protocols could facilitate navigating these requirements and ultimately increase the efficiency of clinical research. Purpose: The National Institute of Allergy and Infectious Diseases (NIAID) developed templates for investigators to serve as the foundation for protocol development. These protocol templates are designed as tools to support investigators in developing clinical protocols. Methods: NIAID established a series of working groups to determine how to improve its capacity to conduct clinical research more efficiently and effectively. The Protocol Template Working Group was convened to determine what protocol templates currently existed within NIAID and whether standard NIAID protocol templates should be produced. After review and assessment of existing protocol documents and requirements, the group reached consensus about required and optional content, determined the format and identified methods for distribution as well as education of investigators in the use of these templates. Results: The templates were approved by the NIAID Executive Committee in 2006 and posted as part of the NIAID Clinical Research Toolkit[1]website for broad access. These documents require scheduled revisions to stay current with regulatory and policy changes. Limitations: The structure of any clinical protocol template, whether comprehensive or specific to a particular study phase, setting or design, affects how it is used by investigators. Each structure presents its own set of advantages and disadvantages. While useful, protocol templates are not stand-alone tools for creating an optimal protocol document but must be complemented by institutional resources and support. Education and guidance of investigators in the appropriate use of templates is necessary to ensure a complete yet concise protocol document. Due to changing regulatory requirements, clinical protocol templates cannot become static but require frequent revisions. Conclusions: Standard protocol templates that meet applicable regulations can be important tools to assist investigators in the effective conduct of clinical research, but they require dedicated resources and ongoing input from key stakeholders. PMID:19625326

Design of a functional cyclic HSV1-TK reporter and its application to PET imaging of apoptosis

PubMed Central

Wang, Zhe; Wang, Fu; Hida, Naoki; Kiesewetter, Dale O; Tian, Jie; Niu, Gang; Chen, Xiaoyuan

2017-01-01

Positron emission tomography (PET) is a sensitive and noninvasive imaging method that is widely used to explore molecular events in living subjects. PET can precisely and quantitatively evaluate cellular apoptosis, which has a crucial role in various physiological and pathological processes. In this protocol, we describe the design and use of an engineered cyclic herpes simplex virus 1–thymidine kinase (HSV1-TK) PET reporter whose kinase activity is specifically switched on by apoptosis. The expression of cyclic TK (cTK) in healthy cells leads to inactive product, whereas the activation of apoptosis through the caspase-3 pathway cleaves cTK, thus restoring its activity and enabling PET imaging. In addition to detailing the design and construction of the cTK plasmid in this protocol, we include assays for evaluating the function and specificity of the cTK reporter in apoptotic cells, such as assays for measuring the cell uptake of PET tracer in apoptotic cells, correlating doxorubicin (Dox)-induced cell apoptosis to cTK function recovery, and in vivo PET imaging of cancer cell apoptosis, and we also include corresponding data acquisition methods. The time to build the entire cTK reporter is ~2–3 weeks. The selection of a stable cancer cell line takes ~4–6 weeks. The time to implement assays regarding cTK function in apoptotic cells and the in vivo imaging varies depending on the experiment. The cyclization strategy described in this protocol can also be adapted to create other reporter systems for broad biomedical applications. PMID:25927390

Simplified Protocol for Carba NP Test for Enhanced Detection of Carbapenemase Producers Directly from Bacterial Cultures.

PubMed

Pasteran, Fernando; Tijet, Nathalie; Melano, Roberto G; Corso, Alejandra

2015-12-01

We compared carbapenemase detection among 266 Gram-negative bacilli (161 carbapenemase producers) using the Carba NP tests issued by the CLSI (CNPt-CLSI) and a novel protocol (CNPt-direct) designed for carbapenemase detection direct from bacterial cultures (instead of bacterial extracts required by the CLSI tests). The specificities were comparable (100%), but the CNPt-direct was more sensitive (98% versus 84%). The CNPt-direct was easier to perform due to the direct use of colonies and offered a more robust detection of carbapenemase producers. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

A Modified Protocol for High-Quality RNA Extraction from Oleoresin-Producing Adult Pines.

PubMed

de Lima, Júlio César; Füller, Thanise Nogueira; de Costa, Fernanda; Rodrigues-Corrêa, Kelly C S; Fett-Neto, Arthur G

2016-01-01

RNA extraction resulting in good yields and quality is a fundamental step for the analyses of transcriptomes through high-throughput sequencing technologies, microarray, and also northern blots, RT-PCR, and RTqPCR. Even though many specific protocols designed for plants with high content of secondary metabolites have been developed, these are often expensive, time consuming, and not suitable for a wide range of tissues. Here we present a modification of the method previously described using the commercially available Concert™ Plant RNA Reagent (Invitrogen) buffer for field-grown adult pine trees with high oleoresin content.

A Survey on Underwater Acoustic Sensor Network Routing Protocols.

PubMed

Li, Ning; Martínez, José-Fernán; Meneses Chaus, Juan Manuel; Eckert, Martina

2016-03-22

Underwater acoustic sensor networks (UASNs) have become more and more important in ocean exploration applications, such as ocean monitoring, pollution detection, ocean resource management, underwater device maintenance, etc. In underwater acoustic sensor networks, since the routing protocol guarantees reliable and effective data transmission from the source node to the destination node, routing protocol design is an attractive topic for researchers. There are many routing algorithms have been proposed in recent years. To present the current state of development of UASN routing protocols, we review herein the UASN routing protocol designs reported in recent years. In this paper, all the routing protocols have been classified into different groups according to their characteristics and routing algorithms, such as the non-cross-layer design routing protocol, the traditional cross-layer design routing protocol, and the intelligent algorithm based routing protocol. This is also the first paper that introduces intelligent algorithm-based UASN routing protocols. In addition, in this paper, we investigate the development trends of UASN routing protocols, which can provide researchers with clear and direct insights for further research.

A Survey on Underwater Acoustic Sensor Network Routing Protocols

PubMed Central

Li, Ning; Martínez, José-Fernán; Meneses Chaus, Juan Manuel; Eckert, Martina

2016-01-01

Underwater acoustic sensor networks (UASNs) have become more and more important in ocean exploration applications, such as ocean monitoring, pollution detection, ocean resource management, underwater device maintenance, etc. In underwater acoustic sensor networks, since the routing protocol guarantees reliable and effective data transmission from the source node to the destination node, routing protocol design is an attractive topic for researchers. There are many routing algorithms have been proposed in recent years. To present the current state of development of UASN routing protocols, we review herein the UASN routing protocol designs reported in recent years. In this paper, all the routing protocols have been classified into different groups according to their characteristics and routing algorithms, such as the non-cross-layer design routing protocol, the traditional cross-layer design routing protocol, and the intelligent algorithm based routing protocol. This is also the first paper that introduces intelligent algorithm-based UASN routing protocols. In addition, in this paper, we investigate the development trends of UASN routing protocols, which can provide researchers with clear and direct insights for further research. PMID:27011193

Multiprocessor shared-memory information exchange

DOE Office of Scientific and Technical Information (OSTI.GOV)

Santoline, L.L.; Bowers, M.D.; Crew, A.W.

1989-02-01

In distributed microprocessor-based instrumentation and control systems, the inter-and intra-subsystem communication requirements ultimately form the basis for the overall system architecture. This paper describes a software protocol which addresses the intra-subsystem communications problem. Specifically the protocol allows for multiple processors to exchange information via a shared-memory interface. The authors primary goal is to provide a reliable means for information to be exchanged between central application processor boards (masters) and dedicated function processor boards (slaves) in a single computer chassis. The resultant Multiprocessor Shared-Memory Information Exchange (MSMIE) protocol, a standard master-slave shared-memory interface suitable for use in nuclear safety systems, ismore » designed to pass unidirectional buffers of information between the processors while providing a minimum, deterministic cycle time for this data exchange.« less

Recommended Practices for the Safe Design and Operation of Flywheels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bender, Donald Arthur

2015-12-01

Flywheel energy storage systems are in use globally in increasing numbers . No codes pertaining specifically to flywheel energy storage exist. A number of industrial incidents have occurred. This protocol recommends a technical basis for safe flywheel de sign and operation for consideration by flywheel developers, users of flywheel systems and standards setting organizations.

Investigating Positive Psychology Approaches in Case Management and Residential Programming with Incarcerated Youth

ERIC Educational Resources Information Center

Cross, Lara E.; Morrison, William; Peterson, Patricia; Domene, Jose F.

2012-01-01

This article examines how a rural Canadian secure custody facility for youth implemented positive psychology principles in its case management protocols and residential programming. A directed content analysis design was utilized to identify specific factors of positive psychology in the facility's policy and programming manual, as well as in…

"The Caterpillar": A Novel Reading Passage for Assessment of Motor Speech Disorders

ERIC Educational Resources Information Center

Patel, Rupal; Connaghan, Kathryn; Franco, Diana; Edsall, Erika; Forgit, Dory; Olsen, Laura; Ramage, Lianna; Tyler, Emily; Russell, Scott

2013-01-01

Purpose: A review of the salient characteristics of motor speech disorders and common assessment protocols revealed the need for a novel reading passage tailored specifically to differentiate between and among the dysarthrias (DYSs) and apraxia of speech (AOS). Method: "The Caterpillar" passage was designed to provide a contemporary, easily read,…

In vivo evaluation of the effect of stimulus distribution on FIR statistical efficiency in event-related fMRI

PubMed Central

Jansma, J Martijn; de Zwart, Jacco A; van Gelderen, Peter; Duyn, Jeff H; Drevets, Wayne C; Furey, Maura L

2013-01-01

Technical developments in MRI have improved signal to noise, allowing use of analysis methods such as Finite impulse response (FIR) of rapid event related functional MRI (er-fMRI). FIR is one of the most informative analysis methods as it determines onset and full shape of the hemodynamic response function (HRF) without any a-priori assumptions. FIR is however vulnerable to multicollinearity, which is directly related to the distribution of stimuli over time. Efficiency can be optimized by simplifying a design, and restricting stimuli distribution to specific sequences, while more design flexibility necessarily reduces efficiency. However, the actual effect of efficiency on fMRI results has never been tested in vivo. Thus, it is currently difficult to make an informed choice between protocol flexibility and statistical efficiency. The main goal of this study was to assign concrete fMRI signal to noise values to the abstract scale of FIR statistical efficiency. Ten subjects repeated a perception task with five random and m-sequence based protocol, with varying but, according to literature, acceptable levels of multicollinearity. Results indicated substantial differences in signal standard deviation, while the level was a function of multicollinearity. Experiment protocols varied up to 55.4% in standard deviation. Results confirm that quality of fMRI in an FIR analysis can significantly and substantially vary with statistical efficiency. Our in vivo measurements can be used to aid in making an informed decision between freedom in protocol design and statistical efficiency. PMID:23473798

Intensive group training protocol versus guideline physiotherapy for patients with chronic low back pain: a randomised controlled trial.

PubMed

van der Roer, Nicole; van Tulder, Maurits; Barendse, Johanna; Knol, Dirk; van Mechelen, Willem; de Vet, Henrica

2008-09-01

Intensive group training using principles of graded activity has been proven to be effective in occupational care for workers with chronic low back pain. Objective of the study was to compare the effects of an intensive group training protocol aimed at returning to normal daily activities and guideline physiotherapy for primary care patients with non-specific chronic low back pain. The study was designed as pragmatic randomised controlled trial with a setup of 105 primary care physiotherapists in 49 practices and 114 patients with non-specific low back pain of more than 12 weeks duration participated in the study. In the intensive group training protocol exercise therapy, back school and operant-conditioning behavioural principles are combined. Patients were treated during 10 individual sessions along 20 group sessions. Usual care consisted of physiotherapy according to the Dutch guidelines for Low Back Pain. Main outcome measures were functional disability (Roland Morris disability questionnaire), pain intensity, perceived recovery and sick leave because of low back pain assessed at baseline and after 6, 13, 26 and 52 weeks. Both an intention-to-treat analysis and a per-protocol analysis were performed. Multilevel analysis did not show significant differences between both treatment groups on any outcome measures during the complete follow-up period, with one exception. After 26 weeks the protocol group showed more reduction in pain intensity than the guideline group, but this difference was absent after 52 weeks. We finally conclude that an intensive group training protocol was not more effective than usual physiotherapy for chronic low back pain.

Lightweight CoAP-Based Bootstrapping Service for the Internet of Things.

PubMed

Garcia-Carrillo, Dan; Marin-Lopez, Rafael

2016-03-11

The Internet of Things (IoT) is becoming increasingly important in several fields of industrial applications and personal applications, such as medical e-health, smart cities, etc. The research into protocols and security aspects related to this area is continuously advancing in making these networks more reliable and secure, taking into account these aspects by design. Bootstrapping is a procedure by which a user obtains key material and configuration information, among other parameters, to operate as an authenticated party in a security domain. Until now solutions have focused on re-using security protocols that were not developed for IoT constraints. For this reason, in this work we propose a design and implementation of a lightweight bootstrapping service for IoT networks that leverages one of the application protocols used in IoT : Constrained Application Protocol (CoAP). Additionally, in order to provide flexibility, scalability, support for large scale deployment, accountability and identity federation, our design uses technologies such as the Extensible Authentication Protocol (EAP) and Authentication Authorization and Accounting (AAA). We have named this service CoAP-EAP. First, we review the state of the art in the field of bootstrapping and specifically for IoT. Second, we detail the bootstrapping service: the architecture with entities and interfaces and the flow operation. Third, we obtain performance measurements of CoAP-EAP (bootstrapping time, memory footprint, message processing time, message length and energy consumption) and compare them with PANATIKI. The most significant and constrained representative of the bootstrapping solutions related with CoAP-EAP. As we will show, our solution provides significant improvements, mainly due to an important reduction of the message length.

Lightweight CoAP-Based Bootstrapping Service for the Internet of Things

PubMed Central

Garcia-Carrillo, Dan; Marin-Lopez, Rafael

2016-01-01

The Internet of Things (IoT) is becoming increasingly important in several fields of industrial applications and personal applications, such as medical e-health, smart cities, etc. The research into protocols and security aspects related to this area is continuously advancing in making these networks more reliable and secure, taking into account these aspects by design. Bootstrapping is a procedure by which a user obtains key material and configuration information, among other parameters, to operate as an authenticated party in a security domain. Until now solutions have focused on re-using security protocols that were not developed for IoT constraints. For this reason, in this work we propose a design and implementation of a lightweight bootstrapping service for IoT networks that leverages one of the application protocols used in IoT : Constrained Application Protocol (CoAP). Additionally, in order to provide flexibility, scalability, support for large scale deployment, accountability and identity federation, our design uses technologies such as the Extensible Authentication Protocol (EAP) and Authentication Authorization and Accounting (AAA). We have named this service CoAP-EAP. First, we review the state of the art in the field of bootstrapping and specifically for IoT. Second, we detail the bootstrapping service: the architecture with entities and interfaces and the flow operation. Third, we obtain performance measurements of CoAP-EAP (bootstrapping time, memory footprint, message processing time, message length and energy consumption) and compare them with PANATIKI. The most significant and constrained representative of the bootstrapping solutions related with CoAP-EAP. As we will show, our solution provides significant improvements, mainly due to an important reduction of the message length. PMID:26978362

Internet Data Delivery for Future Space Missions

NASA Technical Reports Server (NTRS)

Rash, James; Casasanta, Ralph; Hogie, Keith; Hennessy, Joseph F. (Technical Monitor)

2002-01-01

Ongoing work at National Aeronautics and Space Administration Goddard Space Flight Center (NASA/GSFC), seeks to apply standard Internet applications and protocols to meet the technology challenge of future satellite missions. Internet protocols and technologies are under study as a future means to provide seamless dynamic communication among heterogeneous instruments, spacecraft, ground stations, constellations of spacecraft, and science investigators. The primary objective is to design and demonstrate in the laboratory the automated end-to-end transport of files in a simulated dynamic space environment using off-the-shelf, low-cost, commodity-level standard applications and protocols. The demonstrated functions and capabilities will become increasingly significant in the years to come as both earth and space science missions fly more sensors and as the need increases for more network-oriented mission operations. Another element of increasing significance will be the increased cost effectiveness of designing, building, integrating, and operating instruments and spacecraft that will come to the fore as more missions take up the approach of using commodity-level standard communications technologies. This paper describes how an IP (Internet Protocol)-based communication architecture can support all existing operations concepts and how it will enable some new and complex communication and science concepts. The authors identify specific end-to-end data flows from the instruments to the control centers and scientists, and then describe how each data flow can be supported using standard Internet protocols and applications. The scenarios include normal data downlink and command uplink as well as recovery scenarios for both onboard and ground failures. The scenarios are based on an Earth orbiting spacecraft with downlink data rates from 300 Kbps to 4 Mbps. Included examples are based on designs currently being investigated for potential use by the Global Precipitation Measurement (GPM) mission.

Statistical controversies in clinical research: comparison of primary outcomes in protocols, public clinical-trial registries and publications: the example of oncology trials.

PubMed

Perlmutter, A S; Tran, V-T; Dechartres, A; Ravaud, P

2017-04-01

Protocols are often unavailable to peer-reviewers and readers. To detect outcome reporting bias (ORB), readers usually have to resort to publicly available descriptions of study design such as public clinical trial registries. We compared primary outcomes in protocols, ClinicalTrials.gov and publications of oncology trials and evaluated the use of ClinicalTrials.gov as compared with protocols in detecting discrepancies between planned and published outcomes. We searched for phase III oncology trials registered in ClinicalTrials.gov and published in the Journal of Clinical Oncology and New England Journal of Medicine between January 2014 and June 2015. We extracted primary outcomes reported in the protocol, ClinicalTrials.gov and the publication. First, we assessed the quality of primary outcome descriptions by using a published framework. Second, we evaluated modifications of primary outcomes between each source. Finally, we evaluated the agreement, specificity and sensitivity of detecting modifications between planned and published outcomes by using protocols or ClinicalTrials.gov. We included 65 trials, with 81 primary outcomes common among the 3 sources. The proportion of primary outcomes reporting all items from the framework was 73%, 22%, and 75% for protocols, ClinicalTrials.gov and publications, respectively. Eight (12%) trials presented a discrepancy between primary outcomes reported in the protocol and in the publication. Twelve (18.5%) trials presented a discrepancy between primary outcomes registered at ClinicalTrials.gov and in publications. We found a moderate agreement in detecting discrepant reporting of outcomes by using protocols or ClinicalTrials.gov [κ = 0.53, 95% confidence interval (0.25-0.81)]. Using ClinicalTrials.gov to detect discrepant reporting of outcomes showed high specificity (89.5%) but lacked sensitivity (75%) as compared with use of protocols. In oncology trials, primary outcome descriptions in ClinicalTrials.gov are often of low quality and may not reflect what is in the protocol, thus limiting the detection of modifications between planned and published outcomes. © The Author 2016. Published by Oxford University Press on behalf of the European Society for Medical Oncology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

The OAuth 2.0 Web Authorization Protocol for the Internet Addiction Bioinformatics (IABio) Database.

PubMed

Choi, Jeongseok; Kim, Jaekwon; Lee, Dong Kyun; Jang, Kwang Soo; Kim, Dai-Jin; Choi, In Young

2016-03-01

Internet addiction (IA) has become a widespread and problematic phenomenon as smart devices pervade society. Moreover, internet gaming disorder leads to increases in social expenditures for both individuals and nations alike. Although the prevention and treatment of IA are getting more important, the diagnosis of IA remains problematic. Understanding the neurobiological mechanism of behavioral addictions is essential for the development of specific and effective treatments. Although there are many databases related to other addictions, a database for IA has not been developed yet. In addition, bioinformatics databases, especially genetic databases, require a high level of security and should be designed based on medical information standards. In this respect, our study proposes the OAuth standard protocol for database access authorization. The proposed IA Bioinformatics (IABio) database system is based on internet user authentication, which is a guideline for medical information standards, and uses OAuth 2.0 for access control technology. This study designed and developed the system requirements and configuration. The OAuth 2.0 protocol is expected to establish the security of personal medical information and be applied to genomic research on IA.

The Aeronautical Data Link: Taxonomy, Architectural Analysis, and Optimization

NASA Technical Reports Server (NTRS)

Morris, A. Terry; Goode, Plesent W.

2002-01-01

The future Communication, Navigation, and Surveillance/Air Traffic Management (CNS/ATM) System will rely on global satellite navigation, and ground-based and satellite based communications via Multi-Protocol Networks (e.g. combined Aeronautical Telecommunications Network (ATN)/Internet Protocol (IP)) to bring about needed improvements in efficiency and safety of operations to meet increasing levels of air traffic. This paper will discuss the development of an approach that completely describes optimal data link architecture configuration and behavior to meet the multiple conflicting objectives of concurrent and different operations functions. The practical application of the approach enables the design and assessment of configurations relative to airspace operations phases. The approach includes a formal taxonomic classification, an architectural analysis methodology, and optimization techniques. The formal taxonomic classification provides a multidimensional correlation of data link performance with data link service, information protocol, spectrum, and technology mode; and to flight operations phase and environment. The architectural analysis methodology assesses the impact of a specific architecture configuration and behavior on the local ATM system performance. Deterministic and stochastic optimization techniques maximize architectural design effectiveness while addressing operational, technology, and policy constraints.

Does bone debris in anterior cruciate ligament reconstruction really matter? A cohort study of a protocol for bone debris debridement

PubMed Central

Imam, Mohamed A.; Abdelkafy, Ashraf; Dinah, Feroz; Adhikari, Ajeya

2015-01-01

Background: The purpose of the current study was to determine whether a systematic five-step protocol for debridement and evacuation of bone debris during anterior cruciate ligament reconstruction (ACLR) reduces the presence of such debris on post-operative radiographs. Methods: A five-step protocol for removal of bone debris during arthroscopic assisted ACLR was designed. It was applied to 60 patients undergoing ACLR (Group 1), and high-quality digital radiographs were taken post-operatively in each case to assess for the presence of intra-articular bone debris. A control group of 60 consecutive patients in whom no specific bone debris protocol was applied (Group 2) and their post-operative radiographs were also checked for the presence of intra-articular bone debris. Results: In Group 1, only 15% of post-operative radiographs showed residual bone debris, compared to 69% in Group 2 (p < 0.001). Conclusion: A five-step systematic protocol for bone debris removal during arthroscopic assisted ACLR resulted in a significant decrease in residual bone debris seen on high-quality post-operative radiographs. PMID:27163060

"The caterpillar": a novel reading passage for assessment of motor speech disorders.

PubMed

Patel, Rupal; Connaghan, Kathryn; Franco, Diana; Edsall, Erika; Forgit, Dory; Olsen, Laura; Ramage, Lianna; Tyler, Emily; Russell, Scott

2013-02-01

A review of the salient characteristics of motor speech disorders and common assessment protocols revealed the need for a novel reading passage tailored specifically to differentiate between and among the dysarthrias (DYSs) and apraxia of speech (AOS). "The Caterpillar" passage was designed to provide a contemporary, easily read, contextual speech sample with specific tasks (e.g., prosodic contrasts, words of increasing length and complexity) targeted to inform the assessment of motor speech disorders. Twenty-two adults, 15 with DYS or AOS and 7 healthy controls (HC), were recorded reading "The Caterpillar" passage to demonstrate its utility in examining motor speech performance. Analysis of performance across a subset of segmental and prosodic variables illustrated that "The Caterpillar" passage showed promise for extracting individual profiles of impairment that could augment current assessment protocols and inform treatment planning in motor speech disorders.

On-line data display

NASA Astrophysics Data System (ADS)

Lang, Sherman Y. T.; Brooks, Martin; Gauthier, Marc; Wein, Marceli

1993-05-01

A data display system for embedded realtime systems has been developed for use as an operator's user interface and debugging tool. The motivation for development of the On-Line Data Display (ODD) have come from several sources. In particular the design reflects the needs of researchers developing an experimental mobile robot within our laboratory. A proliferation of specialized user interfaces revealed a need for a flexible communications and graphical data display system. At the same time the system had to be readily extensible for arbitrary graphical display formats which would be required for data visualization needs of the researchers. The system defines a communication protocol transmitting 'datagrams' between tasks executing on the realtime system and virtual devices displaying the data in a meaningful way on a graphical workstation. The communication protocol multiplexes logical channels on a single data stream. The current implementation consists of a server for the Harmony realtime operating system and an application written for the Macintosh computer. Flexibility requirements resulted in a highly modular server design, and a layered modular object- oriented design for the Macintosh part of the system. Users assign data types to specific channels at run time. Then devices are instantiated by the user and connected to channels to receive datagrams. The current suite of device types do not provide enough functionality for most users' specialized needs. Instead the system design allows the creation of new device types with modest programming effort. The protocol, design and use of the system are discussed.

Automated recycling of chemistry for virtual screening and library design.

PubMed

Vainio, Mikko J; Kogej, Thierry; Raubacher, Florian

2012-07-23

An early stage drug discovery project needs to identify a number of chemically diverse and attractive compounds. These hit compounds are typically found through high-throughput screening campaigns. The diversity of the chemical libraries used in screening is therefore important. In this study, we describe a virtual high-throughput screening system called Virtual Library. The system automatically "recycles" validated synthetic protocols and available starting materials to generate a large number of virtual compound libraries, and allows for fast searches in the generated libraries using a 2D fingerprint based screening method. Virtual Library links the returned virtual hit compounds back to experimental protocols to quickly assess the synthetic accessibility of the hits. The system can be used as an idea generator for library design to enrich the screening collection and to explore the structure-activity landscape around a specific active compound.

Standards of yellow fever vaccination and travel medicine practice in the Republic of Ireland: A questionnaire-based evaluation.

PubMed

Noone, Peter; Hamza, Mohammed; Tang, John; Flaherty, Gerard

2015-01-01

The Department of Health regulates the designation of yellow fever vaccination centres (YFVCs) in the Republic of Ireland to ensure appropriate standards in the safe, effective use of yellow fever vaccine for overseas travellers. The process of designation of YFVCs is delegated to Directors of Public Health who direct Principal Medical Officers. Variation in implementation of specific criteria for designation exists and no formal follow up inspection is carried out. This survey of all designated YFVCs in the Republic of Ireland aimed to assess compliance with standards to ensure the objectives of the national yellow fever vaccination programme were met. A piloted questionnaire devised from a United Kingdom (UK) YFVC survey was developed and tested in five YFVCs. The questionnaire was adapted for the postal survey and captured data on professional training, reference sources, services provided, physical facilities and supplies, and was distributed to 655 YFVCs in a stamped addressed envelope. During the period 2010-2011, there were 655 designated YFVCs in the Republic of Ireland. Responses were received from 246 centres (38% response rate), 91% of which were in general practice. Deficiencies were identified in respect of vaccine refrigeration protocols, record keeping, attendance at YFVC training sessions, and clinical protocols for adverse events. Specific deficiencies in relation to training, vaccine storage, administration and documentation should be addressed to ensure standardised YFVC practices and thus align them with best international practice. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Passive Testing Approach for Protocols in Wireless Sensor Networks

PubMed Central

Che, Xiaoping; Maag, Stephane; Tan, Hwee-Xian; Tan, Hwee-Pink; Zhou, Zhangbing

2015-01-01

Smart systems are today increasingly developed with the number of wireless sensor devices drastically increasing. They are implemented within several contexts throughout our environment. Thus, sensed data transported in ubiquitous systems are important, and the way to carry them must be efficient and reliable. For that purpose, several routing protocols have been proposed for wireless sensor networks (WSN). However, one stage that is often neglected before their deployment is the conformance testing process, a crucial and challenging step. Compared to active testing techniques commonly used in wired networks, passive approaches are more suitable to the WSN environment. While some works propose to specify the protocol with state models or to analyze them with simulators and emulators, we here propose a logic-based approach for formally specifying some functional requirements of a novel WSN routing protocol. We provide an algorithm to evaluate these properties on collected protocol execution traces. Further, we demonstrate the efficiency and suitability of our approach by its application into common WSN functional properties, as well as specific ones designed from our own routing protocol. We provide relevant testing verdicts through a real indoor testbed and the implementation of our protocol. Furthermore, the flexibility, genericity and practicability of our approach have been proven by the experimental results. PMID:26610495

Energy-efficient and fast data gathering protocols for indoor wireless sensor networks.

PubMed

Tümer, Abdullah Erdal; Gündüz, Mesut

2010-01-01

Wireless Sensor Networks have become an important technology with numerous potential applications for the interaction of computers and the physical environment in civilian and military areas. In the routing protocols that are specifically designed for the applications used by sensor networks, the limited available power of the sensor nodes has been taken into consideration in order to extend the lifetime of the networks. In this paper, two protocols based on LEACH and called R-EERP and S-EERP with base and threshold values are presented. R-EERP and S-EERP are two efficient energy aware routing protocols that can be used for some critical applications such as detecting dangerous gases (methane, ammonium, carbon monoxide, etc.) in an indoor environment. In R-EERP, sensor nodes are deployed randomly in a field similar to LEACH. In S-EERP, nodes are deployed sequentially in the rooms of the flats of a multi-story building. In both protocols, nodes forming clusters do not change during a cluster change time, only the cluster heads change. Furthermore, an XOR operation is performed on the collected data in order to prevent the sending of the same data sensed by the nodes close to each other. Simulation results show that our proposed protocols are more energy-efficient than the conventional LEACH protocol.

A Passive Testing Approach for Protocols in Wireless Sensor Networks.

PubMed

Che, Xiaoping; Maag, Stephane; Tan, Hwee-Xian; Tan, Hwee-Pink; Zhou, Zhangbing

2015-11-19

Smart systems are today increasingly developed with the number of wireless sensor devices drastically increasing. They are implemented within several contexts throughout our environment. Thus, sensed data transported in ubiquitous systems are important, and the way to carry them must be efficient and reliable. For that purpose, several routing protocols have been proposed for wireless sensor networks (WSN). However, one stage that is often neglected before their deployment is the conformance testing process, a crucial and challenging step. Compared to active testing techniques commonly used in wired networks, passive approaches are more suitable to the WSN environment. While some works propose to specify the protocol with state models or to analyze them with simulators and emulators, we here propose a logic-based approach for formally specifying some functional requirements of a novel WSN routing protocol. We provide an algorithm to evaluate these properties on collected protocol execution traces. Further, we demonstrate the efficiency and suitability of our approach by its application into common WSN functional properties, as well as specific ones designed from our own routing protocol. We provide relevant testing verdicts through a real indoor testbed and the implementation of our protocol. Furthermore, the flexibility, genericity and practicability of our approach have been proven by the experimental results.

Initial Characterization of Optical Communications with Disruption-Tolerant Network Protocols

NASA Technical Reports Server (NTRS)

Schoolcraft, Joshua; Wilson, Keith

2011-01-01

Disruption-tolerant networks (DTNs) are groups of network assets connected with a suite of communication protocol technologies designed to mitigate the effects of link delay and disruption. Application of DTN protocols to diverse groups of network resources in multiple sub-networks results in an overlay network-of-networks with autonomous data routing capability. In space environments where delay or disruption is expected, performance of this type of architecture (such as an interplanetary internet) can increase with the inclusion of new communications mediums and techniques. Space-based optical communication links are therefore an excellent building block of space DTN architectures. When compared to traditional radio frequency (RF) communications, optical systems can provide extremely power-efficient and high bandwidth links bridging sub-networks. Because optical links are more susceptible to link disruption and experience the same light-speed delays as RF, optical-enabled DTN architectures can lessen potential drawbacks and maintain the benefits of autonomous optical communications over deep space distances. These environment-driven expectations - link delay and interruption, along with asymmetric data rates - are the purpose of the proof-of-concept experiment outlined herein. In recognizing the potential of these two technologies, we report an initial experiment and characterization of the performance of a DTN-enabled space optical link. The experiment design employs a point-to-point free-space optical link configured to have asymmetric bandwidth. This link connects two networked systems running a DTN protocol implementation designed and written at JPL for use on spacecraft, and further configured for higher bandwidth performance. Comparing baseline data transmission metrics with and without periodic optical link interruptions, the experiment confirmed the DTN protocols' ability to handle real-world unexpected link outages while maintaining capability of reliably delivering data at relatively high rates. Finally, performance characterizations from this data suggest performance optimizations to configuration and protocols for future optical-specific DTN space link scenarios.

Fixation and Commitment while Designing and Its Measurement

ERIC Educational Resources Information Center

Gero, John S.

2011-01-01

This paper introduces the notion that fixation and commitment while designing can be measured by studying the protocol of the design session. It is hypothesized that the dynamic entropy of the linkograph of the protocol provides the basis for such a measurement. The hypothesis is empirically tested using a design protocol and the results…

Combined Shuttle-Box Training with Electrophysiological Cortex Recording and Stimulation as a Tool to Study Perception and Learning.

PubMed

Happel, Max F K; Deliano, Matthias; Ohl, Frank W

2015-10-22

Shuttle-box avoidance learning is a well-established method in behavioral neuroscience and experimental setups were traditionally custom-made; the necessary equipment is now available by several commercial companies. This protocol provides a detailed description of a two-way shuttle-box avoidance learning paradigm in rodents (here Mongolian gerbils; Meriones unguiculatus) in combination with site-specific electrical intracortical microstimulation (ICMS) and simultaneous chronical electrophysiological in vivo recordings. The detailed protocol is applicable to study multiple aspects of learning behavior and perception in different rodent species. Site-specific ICMS of auditory cortical circuits as conditioned stimuli here is used as a tool to test the perceptual relevance of specific afferent, efferent and intracortical connections. Distinct activation patterns can be evoked by using different stimulation electrode arrays for local, layer-dependent ICMS or distant ICMS sites. Utilizing behavioral signal detection analysis it can be determined which stimulation strategy is most effective for eliciting a behaviorally detectable and salient signal. Further, parallel multichannel-recordings using different electrode designs (surface electrodes, depth electrodes, etc.) allow for investigating neuronal observables over the time course of such learning processes. It will be discussed how changes of the behavioral design can increase the cognitive complexity (e.g. detection, discrimination, reversal learning).

Combined Shuttle-Box Training with Electrophysiological Cortex Recording and Stimulation as a Tool to Study Perception and Learning

PubMed Central

Happel, Max F.K.

2015-01-01

Shuttle-box avoidance learning is a well-established method in behavioral neuroscience and experimental setups were traditionally custom-made; the necessary equipment is now available by several commercial companies. This protocol provides a detailed description of a two-way shuttle-box avoidance learning paradigm in rodents (here Mongolian gerbils; Meriones unguiculatus) in combination with site-specific electrical intracortical microstimulation (ICMS) and simultaneous chronical electrophysiological in vivo recordings. The detailed protocol is applicable to study multiple aspects of learning behavior and perception in different rodent species. Site-specific ICMS of auditory cortical circuits as conditioned stimuli here is used as a tool to test the perceptual relevance of specific afferent, efferent and intracortical connections. Distinct activation patterns can be evoked by using different stimulation electrode arrays for local, layer-dependent ICMS or distant ICMS sites. Utilizing behavioral signal detection analysis it can be determined which stimulation strategy is most effective for eliciting a behaviorally detectable and salient signal. Further, parallel multichannel-recordings using different electrode designs (surface electrodes, depth electrodes, etc.) allow for investigating neuronal observables over the time course of such learning processes. It will be discussed how changes of the behavioral design can increase the cognitive complexity (e.g. detection, discrimination, reversal learning). PMID:26556300

Electron microscopy using the genetically encoded APEX2 tag in cultured mammalian cells

PubMed Central

Martell, Jeffrey D; Deerinck, Thomas J; Lam, Stephanie S; Ellisman, Mark H; Ting, Alice Y

2018-01-01

Electron microscopy (EM) is the premiere technique for high-resolution imaging of cellular ultrastructure. Unambiguous identification of specific proteins or cellular compartments in electron micrographs, however, remains challenging because of difficulties in delivering electron-dense contrast agents to specific subcellular targets within intact cells. We recently reported enhanced ascorbate peroxidase 2 (APEX2) as a broadly applicable genetic tag that generates EM contrast on a specific protein or subcellular compartment of interest. This protocol provides guidelines for designing and validating APEX2 fusion constructs, along with detailed instructions for cell culture, transfection, fixation, heavy-metal staining, embedding in resin, and EM imaging. Although this protocol focuses on EM in cultured mammalian cells, APEX2 is applicable to many cell types and contexts, including intact tissues and organisms, and is useful for numerous applications beyond EM, including live-cell proteomic mapping. This protocol, which describes procedures for sample preparation from cell monolayers and cell pellets, can be completed in 10 d, including time for APEX2 fusion construct validation, cell growth, and solidification of embedding resins. Notably, the only additional steps required relative to a standard EM sample preparation are cell transfection and a 2- to 45-min staining period with 3,3′-diaminobenzidine (DAB) and hydrogen peroxide (H2O2). PMID:28796234

Effects of general, specific and combined warm-up on explosive muscular performance

PubMed Central

Henriquez–Olguín, C; Beltrán, AR; Ramírez, MA; Labarca, C; Cornejo, M; Álvarez, C; Ramírez-Campillo, R

2015-01-01

The purpose of this study was to compare the acute effects of general, specific and combined warm-up (WU) on explosive performance. Healthy male (n = 10) subjects participated in six WU protocols in a crossover randomized study design. Protocols were: passive rest (PR; 15 min of passive rest), running (Run; 5 min of running at 70% of maximum heart rate), stretching (STR; 5 min of static stretching exercise), jumping [Jump; 5 min of jumping exercises – 3x8 countermovement jumps (CMJ) and 3x8 drop jumps from 60 cm (DJ60)], and combined (COM; protocols Run+STR+Jump combined). Immediately before and after each WU, subjects were assessed for explosive concentric-only (i.e. squat jump – SJ), slow stretch-shortening cycle (i.e. CMJ), fast stretch-shortening cycle (i.e. DJ60) and contact time (CT) muscle performance. PR significantly reduced SJ performance (p =0.007). Run increased SJ (p =0.0001) and CMJ (p =0.002). STR increased CMJ (p =0.048). Specific WU (i.e. Jump) increased SJ (p =0.001), CMJ (p =0.028) and DJ60 (p =0.006) performance. COM increased CMJ performance (p =0.006). Jump was superior in SJ performance vs. PR (p =0.001). Jump reduced (p =0.03) CT in DJ60. In conclusion, general, specific and combined WU increase slow stretch-shortening cycle (SSC) muscle performance, but only specific WU increases fast SSC muscle performance. Therefore, to increase fast SSC performance, specific fast SSC muscle actions must be included during the WU. PMID:26060335

Network-Friendly Gossiping

NASA Astrophysics Data System (ADS)

Serbu, Sabina; Rivière, Étienne; Felber, Pascal

The emergence of large-scale distributed applications based on many-to-many communication models, e.g., broadcast and decentralized group communication, has an important impact on the underlying layers, notably the Internet routing infrastructure. To make an effective use of network resources, protocols should both limit the stress (amount of messages) on each infrastructure entity like routers and links, and balance as much as possible the load in the network. Most protocols use application-level metrics such as delays to improve efficiency of content dissemination or routing, but the extend to which such application-centric optimizations help reduce and balance the load imposed to the infrastructure is unclear. In this paper, we elaborate on the design of such network-friendly protocols and associated metrics. More specifically, we investigate random-based gossip dissemination. We propose and evaluate different ways of making this representative protocol network-friendly while keeping its desirable properties (robustness and low delays). Simulations of the proposed methods using synthetic and real network topologies convey and compare their abilities to reduce and balance the load while keeping good performance.

Avoidance of harvesting and sampling artefacts in hydraulic analyses: a protocol tested on Malus domestica

PubMed Central

Beikircher, Barbara; Mayr, Stefan

2016-01-01

A prerequisite for reliable hydraulic measurements is an accurate collection of the plant material. Thereby, the native hydraulic state of the sample has to be preserved during harvesting (i.e., cutting the plant or plant parts) and preparation (i.e., excising the target section). This is particularly difficult when harvesting has to be done under transpiring conditions. In this article, we present a harvesting and sampling protocol designed for hydraulic measurements on Malus domestica Borkh. and checked for possible sampling artefacts. To test for artefacts, we analysed the percentage loss of hydraulic conductivity, maximum specific conductivity and water contents of bark and wood of branches, taking into account conduit length, time of day of harvesting, different shoot ages and seasonal effects. Our results prove that use of appropriate protocols can avoid artefactual embolization or refilling even when the xylem is under tension at harvest. The presented protocol was developed for Malus but may also be applied for other angiosperms with similar anatomy and refilling characteristics. PMID:26705311

How Important Is Content in the Ratings of Essay Assessments?

ERIC Educational Resources Information Center

Shermis, Mark D.; Shneyderman, Aleksandr; Attali, Yigal

2008-01-01

This study was designed to examine the extent to which "content" accounts for variance in scores assigned in automated essay scoring protocols. Specifically it was hypothesised that certain writing genre would emphasise content more than others. Data were drawn from 1668 essays calibrated at two grade levels (6 and 8) using "e-rater[TM]", an…

Recasting a Traditional Laboratory Practical as a "Design-Your-Own Protocol" to Teach a Universal Research Skill

ERIC Educational Resources Information Center

Whitworth, David E.

2016-01-01

Laboratory-based practical classes are a common feature of life science teaching, during which students learn how to perform experiments and generate/interpret data. Practical classes are typically instructional, concentrating on providing topic- and technique-specific skills, however to produce research-capable graduates it is also important to…

A New Peer Instruction Method for Teaching Practical Skills in the Health Sciences: An Evaluation of the "Learning Trail"

ERIC Educational Resources Information Center

Dollman, James

2005-01-01

The "Learning Trail" is an innovative application of peer-mediated instruction designed to enhance student learning in large practical classes. The strategy specifically seeks to improve participants' attention to details of protocol that are often difficult to observe during teacher-centered demonstrations to large groups. Students…

European Train Control System: A Case Study in Formal Verification

NASA Astrophysics Data System (ADS)

Platzer, André; Quesel, Jan-David

Complex physical systems have several degrees of freedom. They only work correctly when their control parameters obey corresponding constraints. Based on the informal specification of the European Train Control System (ETCS), we design a controller for its cooperation protocol. For its free parameters, we successively identify constraints that are required to ensure collision freedom. We formally prove the parameter constraints to be sharp by characterizing them equivalently in terms of reachability properties of the hybrid system dynamics. Using our deductive verification tool KeYmaera, we formally verify controllability, safety, liveness, and reactivity properties of the ETCS protocol that entail collision freedom. We prove that the ETCS protocol remains correct even in the presence of perturbation by disturbances in the dynamics. We verify that safety is preserved when a PI controlled speed supervision is used.

Geriatric Oral Health: A Review Article

PubMed Central

Razak, P Abdul; Richard, K M Jose; Thankachan, Rekha P; Hafiz, K A Abdul; Kumar, K Nanda; Sameer, K M

2014-01-01

Oral health is not separate from general health, but maintaining oral health is definitely difficult and different in old age. Even though, few elderly have physical and/or mental situation that call for particular interest in the dental workplace, one should not presume that all elderly community shares these circumstances. In order to achieve health, it is necessary to know few aspects of old age. In due course of old age body tissues get harder, collection of waste products in body cells and loss of lubrication leads to impaired functions of various organs. The design and implementation of comprehensive preventive dentistry protocols for elders presents the dental profession with many challenges. Although a specific protocol must be tailored to meet the unique needs of the individual patient, there are certain factors common to elderly segment of the population that may influence these protocols. PMID:25628498

A Privacy-Preserving Platform for User-Centric Quantitative Benchmarking

NASA Astrophysics Data System (ADS)

Herrmann, Dominik; Scheuer, Florian; Feustel, Philipp; Nowey, Thomas; Federrath, Hannes

We propose a centralised platform for quantitative benchmarking of key performance indicators (KPI) among mutually distrustful organisations. Our platform offers users the opportunity to request an ad-hoc benchmarking for a specific KPI within a peer group of their choice. Architecture and protocol are designed to provide anonymity to its users and to hide the sensitive KPI values from other clients and the central server. To this end, we integrate user-centric peer group formation, exchangeable secure multi-party computation protocols, short-lived ephemeral key pairs as pseudonyms, and attribute certificates. We show by empirical evaluation of a prototype that the performance is acceptable for reasonably sized peer groups.

A model protocol for a diabetes and other noncommunicable disease field survey.

PubMed

Dowse, G K; Zimmet, P

1992-01-01

Field surveys of diabetes and other noncommunicable diseases and their risk factors are increasingly being performed in both developed and developing countries. Although individual priorities and circumstances will influence survey design, a model survey manual and protocol is described which might assist investigators in formulating plans and preparing manuals for their own surveys. The model presented has been successfully used in developing countries, for both rural and urban communities, over more than a decade. It describes examples of survey objectives, and gives specific details of survey procedures and measurement techniques which may be utilized. It contains sufficient flexibility to allow its adaptation to local circumstances.

Generation of dTALEs and Libraries of Synthetic TALE-Activated Promoters for Engineering of Gene Regulatory Networks in Plants.

PubMed

Schreiber, Tom; Tissier, Alain

2017-01-01

Transcription factors with programmable DNA-binding specificity constitute valuable tools for the design of orthogonal gene regulatory networks for synthetic biology. Transcription activator-like effectors (TALEs), as natural transcription regulators, were used to design, build, and test libraries of synthetic TALE-activated promoters (STAPs) that show a broad range of expression levels in plants. In this chapter, we present protocols for the construction of artificial TALEs and corresponding STAPs.

Extra-Vehicular Activity (EVA) glove evaluation test protocol

NASA Technical Reports Server (NTRS)

Hinman-Sweeney, E. M.

1994-01-01

One of the most critical components of a space suit is the gloves, yet gloves have traditionally presented significant design challenges. With continued efforts at glove development, a method for evaluating glove performance is needed. This paper presents a pressure-glove evaluation protocol. A description of this evaluation protocol, and its development is provided. The protocol allows comparison of one glove design to another, or any one design to bare-handed performance. Gloves for higher pressure suits may be evaluated at current and future design pressures to drive out differences in performance due to pressure effects. Using this protocol, gloves may be evaluated during design to drive out design problems and determine areas for improvement, or fully mature designs may be evaluated with respect to mission requirements. Several different test configurations are presented to handle these cases. This protocol was run on a prototype glove. The prototype was evaluated at two operating pressures and in the unpressurized state, with results compared to bare-handed performance. Results and analysis from this test series are provided, as is a description of the configuration used for this test.

Biofeedback treatment of constipation: a critical review.

PubMed

Heymen, Steve; Jones, Kenneth R; Scarlett, Yolanda; Whitehead, William E

2003-09-01

This review was designed to 1) critically examine the research design used in investigations of biofeedback for pelvic floor dyssynergia, 2) compare the various biofeedback treatment protocols for pelvic floor dyssynergia-type constipation used in this research, 3) identify factors that influence treatment outcome, and 4) identify goals for future biofeedback research for pelvic floor dyssynergia. A comprehensive review of both the pediatric and adult research from 1970 to 2002 on "biofeedback for constipation" was conducted using a Medline search in all languages. Only prospective studies including five or more subjects that described the treatment protocol were included. In addition, a meta-analysis of these studies was performed to compare the outcome of different biofeedback protocols for treating constipation. Thirty-eight studies were reviewed, and sample size, treatment protocol, outcome rates, number of sessions, and etiology are shown in a table. Ten studies using a parallel treatment design were reviewed in detail, including seven that randomized subjects to treatment groups. A meta-analysis (weighted by subjects) was performed to compare the results of two treatment protocols prevalent in the literature. The mean success rate of studies using pressure biofeedback (78 percent) was superior (P = 0.018) to the mean success rate for studies using electromyography biofeedback (70 percent). However, the mean success rates comparing studies using intra-anal electromyography sensors to studies using perianal electromyography sensors were 69 and 72 percent, respectively, indicating no advantages for one type of electromyography protocol over the other (P = 0.428). In addition to the varied protocols and instrumentation used, there also are inconsistencies in the literature regarding the severity and etiology of symptoms, patient selection criteria, and the definition of a successful outcome. Finally, no anatomic, physiologic, or demographic variables were identified that would assist in predicting successful outcome. Having significant psychological symptoms was identified as a factor that may influence treatment outcome, but this requires further study. Although most studies report positive results using biofeedback to treat constipation, quality research is lacking. Specific recommendations are made for future investigations to 1) improve experimental design, 2) clearly define outcome measures, 3) identify the etiology and severity of symptoms, 4) determine which treatment protocol and which component of treatment is most effective for different types of subjects, 5) systematically explore the role of psychopathology in this population, 6) use an adequate sample size that allows for meaningful analysis, and 7) include long-term follow-up data.

Normalization of cortical thickness measurements across different T1 magnetic resonance imaging protocols by novel W-Score standardization.

PubMed

Chung, Jinyong; Yoo, Kwangsun; Lee, Peter; Kim, Chan Mi; Roh, Jee Hoon; Park, Ji Eun; Kim, Sang Joon; Seo, Sang Won; Shin, Jeong-Hyeon; Seong, Joon-Kyung; Jeong, Yong

2017-10-01

The use of different 3D T1-weighted magnetic resonance (T1 MR) imaging protocols induces image incompatibility across multicenter studies, negating the many advantages of multicenter studies. A few methods have been developed to address this problem, but significant image incompatibility still remains. Thus, we developed a novel and convenient method to improve image compatibility. W-score standardization creates quality reference values by using a healthy group to obtain normalized disease values. We developed a protocol-specific w-score standardization to control the protocol effect, which is applied to each protocol separately. We used three data sets. In dataset 1, brain T1 MR images of normal controls (NC) and patients with Alzheimer's disease (AD) from two centers, acquired with different T1 MR protocols, were used (Protocol 1 and 2, n = 45/group). In dataset 2, data from six subjects, who underwent MRI with two different protocols (Protocol 1 and 2), were used with different repetition times, echo times, and slice thicknesses. In dataset 3, T1 MR images from a large number of healthy normal controls (Protocol 1: n = 148, Protocol 2: n = 343) were collected for w-score standardization. The protocol effect and disease effect on subjects' cortical thickness were analyzed before and after the application of protocol-specific w-score standardization. As expected, different protocols resulted in differing cortical thickness measurements in both NC and AD subjects. Different measurements were obtained for the same subject when imaged with different protocols. Multivariate pattern difference between measurements was observed between the protocols. Classification accuracy between two protocols was nearly 90%. After applying protocol-specific w-score standardization, the differences between the protocols substantially decreased. Most importantly, protocol-specific w-score standardization reduced both univariate and multivariate differences in the images while maintaining the AD disease effect. Compared to conventional regression methods, our method showed the best performance for in terms of controlling the protocol effect while preserving disease information. Protocol-specific w-score standardization effectively resolved the concerns of conventional regression methods. It showed the best performance for improving the compatibility of a T1 MR post-processed feature, cortical thickness. Copyright © 2017 Elsevier Inc. All rights reserved.

Considerations in establishing a post-mortem brain and tissue bank for the study of myalgic encephalomyelitis/chronic fatigue syndrome: a proposed protocol.

PubMed

Nacul, Luis; O'Donovan, Dominic G; Lacerda, Eliana M; Gveric, Djordje; Goldring, Kirstin; Hall, Alison; Bowman, Erinna; Pheby, Derek

2014-06-18

Our aim, having previously investigated through a qualitative study involving extensive discussions with experts and patients the issues involved in establishing and maintaining a disease specific brain and tissue bank for myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS), was to develop a protocol for a UK ME/CFS repository of high quality human tissue from well characterised subjects with ME/CFS and controls suitable for a broad range of research applications. This would involve a specific donor program coupled with rapid tissue collection and processing, supplemented by comprehensive prospectively collected clinical, laboratory and self-assessment data from cases and controls. We reviewed the operations of existing tissue banks from published literature and from their internal protocols and standard operating procedures (SOPs). On this basis, we developed the protocol presented here, which was designed to meet high technical and ethical standards and legal requirements and was based on recommendations of the MRC UK Brain Banks Network. The facility would be most efficient and cost-effective if incorporated into an existing tissue bank. Tissue collection would be rapid and follow robust protocols to ensure preservation sufficient for a wide range of research uses. A central tissue bank would have resources both for wide-scale donor recruitment and rapid response to donor death for prompt harvesting and processing of tissue. An ME/CFS brain and tissue bank could be established using this protocol. Success would depend on careful consideration of logistic, technical, legal and ethical issues, continuous consultation with patients and the donor population, and a sustainable model of funding ideally involving research councils, health services, and patient charities. This initiative could revolutionise the understanding of this still poorly-understood disease and enhance development of diagnostic biomarkers and treatments.

Cognitive behavioral therapy program for cannabis use cessation in first-episode psychosis patients: study protocol for a randomized controlled trial.

PubMed

González-Ortega, Itxaso; Echeburúa, Enrique; García-Alocén, Adriana; Vega, Patricia; González-Pinto, Ana

2016-07-29

The high rate of cannabis use among patients with first-episode psychosis (FEP), as well as the associated negative impact on illness course and treatment outcomes, underlines the need for effective interventions in these populations. However, to date, there have been few clinical treatment trials (of pharmacological or psychological interventions) that have specifically focused on addressing comorbid cannabis use among these patients. The aim of this paper is to describe the design of a study protocol for a randomized controlled trial in which the objective is to assess the efficacy of a specific cognitive behavioral therapy program for cannabis cessation in patients with FEP compared to standard treatment (psychoeducation). This is a single-blind randomized study with 1 year of follow-up. Patients are to be randomly assigned to one of two treatments: (1) specific cognitive behavioral therapy for cannabis cessation composed of 1-hour sessions once a week for 16 weeks, in addition to pharmacological treatment scheduled by the psychiatrist, or (2) a control group (psychoeducation + pharmacological treatment) following the same format as the experimental group. Participants in both groups will be evaluated at baseline (pre-treatment), at 16 weeks (post-treatment), and at 3 and 6 months and 1 year of follow-up. The primary outcome will be that patients in the experimental group will have greater cannabis cessation than patients in the control group at post-treatment. The secondary outcome will be that the experimental group will have better clinical and functional outcomes than the control group. This study provides the description of a clinical trial design based on specific cognitive behavioral therapy for cannabis cessation in FEP patients, aiming to improve clinical and functional outcome, as well as tackling the addictive disorder. NCT02319746 ClinicalTrials.gov Identifier. ClinicalTrials.gov Protocol and Results Registration System (PRS) Receipt Release Date: 15 December 2014.

Design and Practical Evaluation of a Family of Lightweight Protocols for Heterogeneous Sensing through BLE Beacons in IoT Telemetry Applications.

PubMed

Hernández-Rojas, Dixys L; Fernández-Caramés, Tiago M; Fraga-Lamas, Paula; Escudero, Carlos J

2017-12-27

The Internet of Things (IoT) involves a wide variety of heterogeneous technologies and resource-constrained devices that interact with each other. Due to such constraints, IoT devices usually require lightweight protocols that optimize the use of resources and energy consumption. Among the different commercial IoT devices, Bluetooth and Bluetooth Low Energy (BLE)-based beacons, which broadcast periodically certain data packets to notify their presence, have experienced a remarkable growth, specially due to their application in indoor positioning systems. This article proposes a family of protocols named Lightweight Protocol for Sensors (LP4S) that provides fast responses and enables plug-and-play mechanisms that allow IoT telemetry systems to discover new nodes and to describe and auto-register the sensors and actuators connected to a beacon. Thus, three protocols are defined depending on the beacon hardware characteristics: LP4S-6 (for resource-constraint beacons), LP4S-X (for more powerful beacons) and LP4S-J (for beacons able to run complex firmware). In order to demonstrate the capabilities of the designed protocols, the most restrictive (LP4S-6) is tested after implementing it for a telemetry application in a beacon based on Eddystone (Google's open beacon format). Thus, the beacon specification is extended in order to increase its ability to manage unlimited sensors in a telemetry system without interfering in its normal operation with Eddystone frames. The performed experiments show the feasibility of the proposed solution and its superiority, in terms of latency and energy consumption, with respect to approaches based on Generic Attribute Profile (GATT) when multiple users connect to a mote or in scenarios where latency is not a restriction, but where low-energy consumption is essential.

Delay and Disruption Tolerant Networking MACHETE Model

NASA Technical Reports Server (NTRS)

Segui, John S.; Jennings, Esther H.; Gao, Jay L.

2011-01-01

To verify satisfaction of communication requirements imposed by unique missions, as early as 2000, the Communications Networking Group at the Jet Propulsion Laboratory (JPL) saw the need for an environment to support interplanetary communication protocol design, validation, and characterization. JPL's Multi-mission Advanced Communications Hybrid Environment for Test and Evaluation (MACHETE), described in Simulator of Space Communication Networks (NPO-41373) NASA Tech Briefs, Vol. 29, No. 8 (August 2005), p. 44, combines various commercial, non-commercial, and in-house custom tools for simulation and performance analysis of space networks. The MACHETE environment supports orbital analysis, link budget analysis, communications network simulations, and hardware-in-the-loop testing. As NASA is expanding its Space Communications and Navigation (SCaN) capabilities to support planned and future missions, building infrastructure to maintain services and developing enabling technologies, an important and broader role is seen for MACHETE in design-phase evaluation of future SCaN architectures. To support evaluation of the developing Delay Tolerant Networking (DTN) field and its applicability for space networks, JPL developed MACHETE models for DTN Bundle Protocol (BP) and Licklider/Long-haul Transmission Protocol (LTP). DTN is an Internet Research Task Force (IRTF) architecture providing communication in and/or through highly stressed networking environments such as space exploration and battlefield networks. Stressed networking environments include those with intermittent (predictable and unknown) connectivity, large and/or variable delays, and high bit error rates. To provide its services over existing domain specific protocols, the DTN protocols reside at the application layer of the TCP/IP stack, forming a store-and-forward overlay network. The key capabilities of the Bundle Protocol include custody-based reliability, the ability to cope with intermittent connectivity, the ability to take advantage of scheduled and opportunistic connectivity, and late binding of names to addresses.

Design and Practical Evaluation of a Family of Lightweight Protocols for Heterogeneous Sensing through BLE Beacons in IoT Telemetry Applications

PubMed Central

2017-01-01

The Internet of Things (IoT) involves a wide variety of heterogeneous technologies and resource-constrained devices that interact with each other. Due to such constraints, IoT devices usually require lightweight protocols that optimize the use of resources and energy consumption. Among the different commercial IoT devices, Bluetooth and Bluetooth Low Energy (BLE)-based beacons, which broadcast periodically certain data packets to notify their presence, have experienced a remarkable growth, specially due to their application in indoor positioning systems. This article proposes a family of protocols named Lightweight Protocol for Sensors (LP4S) that provides fast responses and enables plug-and-play mechanisms that allow IoT telemetry systems to discover new nodes and to describe and auto-register the sensors and actuators connected to a beacon. Thus, three protocols are defined depending on the beacon hardware characteristics: LP4S-6 (for resource-constraint beacons), LP4S-X (for more powerful beacons) and LP4S-J (for beacons able to run complex firmware). In order to demonstrate the capabilities of the designed protocols, the most restrictive (LP4S-6) is tested after implementing it for a telemetry application in a beacon based on Eddystone (Google’s open beacon format). Thus, the beacon specification is extended in order to increase its ability to manage unlimited sensors in a telemetry system without interfering in its normal operation with Eddystone frames. The performed experiments show the feasibility of the proposed solution and its superiority, in terms of latency and energy consumption, with respect to approaches based on Generic Attribute Profile (GATT) when multiple users connect to a mote or in scenarios where latency is not a restriction, but where low-energy consumption is essential. PMID:29280975

Development of a dynamic quality assurance testing protocol for multisite clinical trial DCE-CT accreditation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Driscoll, B.; Keller, H.; Jaffray, D.

2013-08-15

Purpose: Credentialing can have an impact on whether or not a clinical trial produces useful quality data that is comparable between various institutions and scanners. With the recent increase of dynamic contrast enhanced-computed tomography (DCE-CT) usage as a companion biomarker in clinical trials, effective quality assurance, and control methods are required to ensure there is minimal deviation in the results between different scanners and protocols at various institutions. This paper attempts to address this problem by utilizing a dynamic flow imaging phantom to develop and evaluate a DCE-CT quality assurance (QA) protocol.Methods: A previously designed flow phantom, capable of producingmore » predictable and reproducible time concentration curves from contrast injection was fully validated and then utilized to design a DCE-CT QA protocol. The QA protocol involved a set of quantitative metrics including injected and total mass error, as well as goodness of fit comparison to the known truth concentration curves. An additional region of interest (ROI) sensitivity analysis was also developed to provide additional details on intrascanner variability and determine appropriate ROI sizes for quantitative analysis. Both the QA protocol and ROI sensitivity analysis were utilized to test variations in DCE-CT results using different imaging parameters (tube voltage and current) as well as alternate reconstruction methods and imaging techniques. The developed QA protocol and ROI sensitivity analysis was then applied at three institutions that were part of clinical trial involving DCE-CT and results were compared.Results: The inherent specificity of robustness of the phantom was determined through calculation of the total intraday variability and determined to be less than 2.2 ± 1.1% (total calculated output contrast mass error) with a goodness of fit (R{sup 2}) of greater than 0.99 ± 0.0035 (n= 10). The DCE-CT QA protocol was capable of detecting significant deviations from the expected phantom result when scanning at low mAs and low kVp in terms of quantitative metrics (Injected Mass Error 15.4%), goodness of fit (R{sup 2}) of 0.91, and ROI sensitivity (increase in minimum input function ROI radius by 146 ± 86%). These tests also confirmed that the ASIR reconstruction process was beneficial in reducing noise without substantially increasing partial volume effects and that vendor specific modes (e.g., axial shuttle) did not significantly affect the phantom results. The phantom and QA protocol were finally able to quickly (<90 min) and successfully validate the DCE-CT imaging protocol utilized at the three separate institutions of a multicenter clinical trial; thereby enhancing the confidence in the patient data collected.Conclusions: A DCE QA protocol was developed that, in combination with a dynamic multimodality flow phantom, allows the intrascanner variability to be separated from other sources of variability such as the impact of injection protocol and ROI selection. This provides a valuable resource that can be utilized at various clinical trial institutions to test conformance with imaging protocols and accuracy requirements as well as ensure that the scanners are performing as expected for dynamic scans.« less

In vivo evaluation of the effect of stimulus distribution on FIR statistical efficiency in event-related fMRI.

PubMed

Jansma, J Martijn; de Zwart, Jacco A; van Gelderen, Peter; Duyn, Jeff H; Drevets, Wayne C; Furey, Maura L

2013-05-15

Technical developments in MRI have improved signal to noise, allowing use of analysis methods such as Finite impulse response (FIR) of rapid event related functional MRI (er-fMRI). FIR is one of the most informative analysis methods as it determines onset and full shape of the hemodynamic response function (HRF) without any a priori assumptions. FIR is however vulnerable to multicollinearity, which is directly related to the distribution of stimuli over time. Efficiency can be optimized by simplifying a design, and restricting stimuli distribution to specific sequences, while more design flexibility necessarily reduces efficiency. However, the actual effect of efficiency on fMRI results has never been tested in vivo. Thus, it is currently difficult to make an informed choice between protocol flexibility and statistical efficiency. The main goal of this study was to assign concrete fMRI signal to noise values to the abstract scale of FIR statistical efficiency. Ten subjects repeated a perception task with five random and m-sequence based protocol, with varying but, according to literature, acceptable levels of multicollinearity. Results indicated substantial differences in signal standard deviation, while the level was a function of multicollinearity. Experiment protocols varied up to 55.4% in standard deviation. Results confirm that quality of fMRI in an FIR analysis can significantly and substantially vary with statistical efficiency. Our in vivo measurements can be used to aid in making an informed decision between freedom in protocol design and statistical efficiency. Published by Elsevier B.V.

RT-Syn: A real-time software system generator

NASA Technical Reports Server (NTRS)

Setliff, Dorothy E.

1992-01-01

This paper presents research into providing highly reusable and maintainable components by using automatic software synthesis techniques. This proposal uses domain knowledge combined with automatic software synthesis techniques to engineer large-scale mission-critical real-time software. The hypothesis centers on a software synthesis architecture that specifically incorporates application-specific (in this case real-time) knowledge. This architecture synthesizes complex system software to meet a behavioral specification and external interaction design constraints. Some examples of these external constraints are communication protocols, precisions, timing, and space limitations. The incorporation of application-specific knowledge facilitates the generation of mathematical software metrics which are used to narrow the design space, thereby making software synthesis tractable. Success has the potential to dramatically reduce mission-critical system life-cycle costs not only by reducing development time, but more importantly facilitating maintenance, modifications, and extensions of complex mission-critical software systems, which are currently dominating life cycle costs.

Design of clinical trials for new drugs in animals.

PubMed

Muser, R K

1980-05-15

Consideration of the intended purpose, an effort to ask specific questions that can be answered by specific data, selection of the correct values to be measured, and investigators who are able to conduct the study, will make it possible to design clinical studies properly. The ethical need to avoid unnecessary suffering of experimental animals and rules and regulations in effect at the time of clinical trials will dictate certain aspects of the design. The type of product to be evaluated, its mode of administration, the type of animal in which the drug will be used, the type of investigator who will collect the data, and the individual who will use the drug, will determine the mechanical part of the protocol. All of these factors need to be considered and discussed with all participants, which may include biostatisticians, regulatory authorities, investigators, and other individuals, to ensure that a rational design is chosen.

Designing of routing algorithms in autonomous distributed data transmission system for mobile computing devices with ‘WiFi-Direct’ technology

NASA Astrophysics Data System (ADS)

Nikitin, I. A.; Sherstnev, V. S.; Sherstneva, A. I.; Botygin, I. A.

2017-02-01

The results of the research of existent routing protocols in wireless networks and their main features are discussed in the paper. Basing on the protocol data, the routing protocols in wireless networks, including search routing algorithms and phone directory exchange algorithms, are designed with the ‘WiFi-Direct’ technology. Algorithms without IP-protocol were designed, and that enabled one to increase the efficiency of the algorithms while working only with the MAC-addresses of the devices. The developed algorithms are expected to be used in the mobile software engineering with the Android platform taken as base. Easier algorithms and formats of the well-known route protocols, rejection of the IP-protocols enables to use the developed protocols on more primitive mobile devices. Implementation of the protocols to the engineering industry enables to create data transmission networks among working places and mobile robots without any access points.

Community health workers' experiences of mobile device-enabled clinical decision support systems for maternal, newborn and child health in developing countries: a qualitative systematic review protocol.

PubMed

Dzabeng, Francis; Enuameh, Yeetey; Adjei, George; Manu, Grace; Asante, Kwaku Poku; Owusu-Agyei, Seth

2016-09-01

The objective of this review is to synthesize evidence on the experiences of community health workers (CHWs) of mobile device-enabled clinical decision support systems (CDSSs) interventions designed to support maternal newborn and child health (MNCH) in low-and middle-income countries.Specific objectives.

Individual identification of Sitka black-tailed deer (Odocoileus hemionus sitkensis) using DNA from fecal pellets

Treesearch

Todd J. Brinkman; David K. Person; Michael K. Schwartz; Kristine L. Pilgrim; Kevin E. Colson; Kris J. Hundertmark

2010-01-01

We tested a protocol for extracting DNA from fecal pellets from Sitka black-tailed deer (Odocoileus hemionus sitkensis) and evaluated genotyping performance of previously developed microsatellite markers as well as a suite of new markers designed specifically for this study. We screened 30 microsatellites, and identified 7 (23%) loci including 4 new markers, that fit...

On the Design of a Comprehensive Authorisation Framework for Service Oriented Architecture (SOA)

DTIC Science & Technology

2013-07-01

Authentication Server AZM Authorisation Manager AZS Authorisation Server BP Business Process BPAA Business Process Authorisation Architecture BPAD Business...Internet Protocol Security JAAS Java Authentication and Authorisation Service MAC Mandatory Access Control RBAC Role Based Access Control RCA Regional...the authentication process, make authorisation decisions using application specific access control functions that results in the practice of

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ishihara, T

Currently, the problem at hand is in distributing identical copies of OEP and filter software to a large number of farm nodes. One of the common methods used to transfer these softwares is through unicast. Unicast protocol faces the problem of repetitiously sending the same data over the network. Since the sending rate is limited, this process poses to be a bottleneck. Therefore, one possible solution to this problem lies in creating a reliable multicast protocol. A specific type of multicast protocol is the Bulk Multicast Protocol [4]. This system consists of one sender distributing data to many receivers. Themore » sender delivers data at a given rate of data packets. In response to that, the receiver replies to the sender with a status packet which contains information about the packet loss in terms of Negative Acknowledgment. The probability of the status packet sent back to the sender is+, where N is the number of receivers. The protocol is designed to have approximately 1 status packet for each data packet sent. In this project, we were able to show that the time taken for the complete transfer of a file to multiple receivers was about 12 times faster with multicast than by the use of unicast. The implementation of this experimental protocol shows remarkable improvement in mass data transfer to a large number of farm machines.« less

Treatment outcomes after implementation of an adapted WHO protocol for severe sepsis and septic shock in Haiti.

PubMed

Papali, Alfred; Eoin West, T; Verceles, Avelino C; Augustin, Marc E; Nathalie Colas, L; Jean-Francois, Carl H; Patel, Devang M; Todd, Nevins W; McCurdy, Michael T

2017-10-01

The World Health Organization (WHO) has developed a simplified algorithm specific to resource-limited settings for the treatment of severe sepsis emphasizing early fluids and antibiotics. However, this protocol's clinical effectiveness is unknown. We describe patient outcomes before and after implementation of an adapted WHO severe sepsis protocol at a community hospital in Haiti. Using a before-and-after study design, we retrospectively enrolled 99 adult Emergency Department patients with severe sepsis from January through March 2012. After protocol implementation in January 2014, we compared outcomes to 67 patients with severe sepsis retrospectively enrolled from February to April 2014. We defined sepsis according to the WHO's Integrated Management of Adult Illness guidelines and severe sepsis as sepsis plus organ dysfunction. After protocol implementation, quantity of fluid administered increased and the physician's differential diagnoses more often included sepsis. Patients were more likely to have follow-up vital signs taken sooner, a radiograph performed, and a lactic acid tested. There were no improvements in mortality, time to fluids or antimicrobials. Use of a simplified sepsis protocol based primarily on physiologic parameters allows for substantial improvements in process measures in the care of severely septic patients in a resource-constrained setting. Copyright © 2017 Elsevier Inc. All rights reserved.

Approaches for improving thermostability characteristics in cellulases.

PubMed

Anbar, Michael; Bayer, Edward A

2012-01-01

Many efforts have been invested to reduce the cost of biofuel production to substitute renewable sources of energy for fossil-based fuels. At the forefront of these efforts are the initiatives to convert plant-derived cellulosic material to biofuels. Although significant improvements have been achieved recently in cellulase engineering in both efficiency and cost reduction, complete degradation of lignocellulosic material still requires very long periods of time and high enzyme loads. Thermostable cellulases offer many advantages in the bioconversion process, which include increase in specific activity, higher levels of stability, inhibition of microbial growth, increase in mass transfer rate due to lower fluid viscosity, and greater flexibility in the bioprocess. Besides rational design methods, which require deep understanding of protein structure-function relationship, two of the major methods for improvement in specific cellulase properties are directed evolution and knowledge-based library design based on multiple sequence alignments. In this chapter, we provide protocols for constructing and screening of improved thermostable cellulases. Modifications of these protocols may also be used for screening for other improved properties of cellulases such as pH tolerance, high salt, and more. Copyright © 2012 Elsevier Inc. All rights reserved.

Detecting and overcoming systematic bias in high-throughput screening technologies: a comprehensive review of practical issues and methodological solutions.

PubMed

Caraus, Iurie; Alsuwailem, Abdulaziz A; Nadon, Robert; Makarenkov, Vladimir

2015-11-01

Significant efforts have been made recently to improve data throughput and data quality in screening technologies related to drug design. The modern pharmaceutical industry relies heavily on high-throughput screening (HTS) and high-content screening (HCS) technologies, which include small molecule, complementary DNA (cDNA) and RNA interference (RNAi) types of screening. Data generated by these screening technologies are subject to several environmental and procedural systematic biases, which introduce errors into the hit identification process. We first review systematic biases typical of HTS and HCS screens. We highlight that study design issues and the way in which data are generated are crucial for providing unbiased screening results. Considering various data sets, including the publicly available ChemBank data, we assess the rates of systematic bias in experimental HTS by using plate-specific and assay-specific error detection tests. We describe main data normalization and correction techniques and introduce a general data preprocessing protocol. This protocol can be recommended for academic and industrial researchers involved in the analysis of current or next-generation HTS data. © The Author 2015. Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

Sampling protocol for post-landfall Deepwater Horizon oil release, Gulf of Mexico, 2010

USGS Publications Warehouse

Wilde, F.D.; Skrobialowski, S.C.; Hart, J.S.

2010-01-01

The protocols and procedures described in this report are designed to be used by U.S. Geological Survey (USGS) field teams for the collection of environmental data and samples in coastal areas affected by the 2010 Deepwater Horizon oil spill in the Gulf of Mexico. This sampling protocol focuses specifically on sampling for water, sediments, benthic invertebrates, and microorganisms (ambient bacterial populations) after shoreline arrival of petroleum-associated product on beach, barrier island, and wetland environments of the Gulf of Mexico coastal states. Deployment to sampling sites, site setup, and sample collection in these environments necessitates modifications to standard USGS sampling procedures in order to address the regulatory, logistical, and legal requirements associated with samples collected in oil-impacted coastal areas. This document, therefore, has been written as an addendum to the USGS National Field Manual for the Collection of Water-Quality Data (NFM) (http://pubs.water.usgs.gov/twri9A/), which provides the basis for training personnel in the use of standard USGS sampling protocols. The topics covered in this Gulf of Mexico oil-spill sampling protocol augment NFM protocols for field-deployment preparations, health and safety precautions, sampling and quality-assurance procedures, and decontamination requirements under potentially hazardous environmental conditions. Documentation procedures and maintenance of sample integrity by use of chain-of-custody procedures also are described in this protocol.

The use of high-fidelity human patient simulation as an evaluative tool in the development of clinical research protocols and procedures.

PubMed

Wright, Melanie C; Taekman, Jeffrey M; Barber, Linda; Hobbs, Gene; Newman, Mark F; Stafford-Smith, Mark

2005-12-01

Errors in clinical research can be costly, in terms of patient safety, data integrity, and data collection. Data inaccuracy in early subjects of a clinical study may be associated with problems in the design of the protocol, procedures, and data collection tools. High-fidelity patient simulation centers provide an ideal environment to apply human-centered design to clinical trial development. A draft of a complex clinical protocol was designed, evaluated and modified using a high-fidelity human patient simulator in the Duke University Human Simulation and Patient Safety Center. The process included walk-throughs, detailed modifications of the protocol and development of procedural aids. Training of monitors and coordinators provided an opportunity for observation of performance that was used to identify further improvements to the protocol. Evaluative steps were used to design the research protocol and procedures. Iterative modifications were made to the protocol and data collection tools. The success in use of human simulation in the preparation of a complex clinical drug trial suggests the benefits of human patient simulation extend beyond training and medical equipment evaluation. Human patient simulation can provide a context for informal expert evaluation of clinical protocol design and for formal "rehearsal" to evaluate the efficacy of procedures and support tools.

Accelerated treatment protocols: full arch treatment with interim and definitive prostheses.

PubMed

Drago, Carl

2012-01-01

With the advent of titanium, root form implants and osseointegration, dental treatment has undergone a metamorphosis in recent years. These new techniques enable dentists to provide anchorage for various kinds of prostheses that improve masticatory function, esthetics, and comfort for patients. Implant treatment protocols have been improved relative to implant macro- and micro-geometries, surgical and prosthetic components, and treatment times. Over the past 20 years, immediate occlusal function (also known as loading) has been established as a predictable treatment modality, provided certain specific criteria are met. In many cases, edentulous patients, crippled by the loss of their teeth, can undergo outpatient surgical and prosthetic procedures and return to a masticatory function that is near normal--sometimes after only one day of surgical and prosthetic treatment. This treatment option is also available for patients with advanced, generalized periodontal disease. Computer-assisted design/Computer-assisted manufacturing (CAD/CAM) has transformed how dental prostheses are made, offering improved accuracy, longevity, and biocompatibility; along with reduced labor costs and fewer complications than casting technologies. This article reviews the principles associated with immediate occlusal loading and illustrates one specific accelerated prosthodontic treatment protocol used to treat edentulous and partially edentulous patients with interim and definitive prostheses.

Development and Field-Testing of a Study Protocol, including a Web-Based Occupant Survey Tool, for Use in Intervention Studies of Indoor Environmental Quality

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendell, Mark; Eliseeva, Ekaterina; Spears, Michael

We developed and pilot-tested an overall protocol for intervention studies to evaluate the effects of indoor environmental changes in office buildings on the health symptoms and comfort of occupants. The protocol includes a web-based survey to assess the occupant's responses, as well as specific features of study design and analysis. The pilot study, carried out on two similar floors in a single building, compared two types of ventilation system filter media. With support from the building's Facilities staff, the implementation of the filter change intervention went well. While the web-based survey tool worked well also, low overall response rates (21-34percentmore » among the three work groups included) limited our ability to evaluate the filter intervention., The total number of questionnaires returned was low even though we extended the study from eight to ten weeks. Because another simultaneous study we conducted elsewhere using the same survey had a high response rate (>70percent), we conclude that the low response here resulted from issues specific to this pilot, including unexpected restrictions by some employing agencies on communication with occupants.« less

Systems oncology: towards patient-specific treatment regimes informed by multiscale mathematical modelling.

PubMed

Powathil, Gibin G; Swat, Maciej; Chaplain, Mark A J

2015-02-01

The multiscale complexity of cancer as a disease necessitates a corresponding multiscale modelling approach to produce truly predictive mathematical models capable of improving existing treatment protocols. To capture all the dynamics of solid tumour growth and its progression, mathematical modellers need to couple biological processes occurring at various spatial and temporal scales (from genes to tissues). Because effectiveness of cancer therapy is considerably affected by intracellular and extracellular heterogeneities as well as by the dynamical changes in the tissue microenvironment, any model attempt to optimise existing protocols must consider these factors ultimately leading to improved multimodal treatment regimes. By improving existing and building new mathematical models of cancer, modellers can play important role in preventing the use of potentially sub-optimal treatment combinations. In this paper, we analyse a multiscale computational mathematical model for cancer growth and spread, incorporating the multiple effects of radiation therapy and chemotherapy in the patient survival probability and implement the model using two different cell based modelling techniques. We show that the insights provided by such multiscale modelling approaches can ultimately help in designing optimal patient-specific multi-modality treatment protocols that may increase patients quality of life. Copyright © 2014 Elsevier Ltd. All rights reserved.

A modular method for the extraction of DNA and RNA, and the separation of DNA pools from diverse environmental sample types

PubMed Central

Lever, Mark A.; Torti, Andrea; Eickenbusch, Philip; Michaud, Alexander B.; Šantl-Temkiv, Tina; Jørgensen, Bo Barker

2015-01-01

A method for the extraction of nucleic acids from a wide range of environmental samples was developed. This method consists of several modules, which can be individually modified to maximize yields in extractions of DNA and RNA or separations of DNA pools. Modules were designed based on elaborate tests, in which permutations of all nucleic acid extraction steps were compared. The final modular protocol is suitable for extractions from igneous rock, air, water, and sediments. Sediments range from high-biomass, organic rich coastal samples to samples from the most oligotrophic region of the world's oceans and the deepest borehole ever studied by scientific ocean drilling. Extraction yields of DNA and RNA are higher than with widely used commercial kits, indicating an advantage to optimizing extraction procedures to match specific sample characteristics. The ability to separate soluble extracellular DNA pools without cell lysis from intracellular and particle-complexed DNA pools may enable new insights into the cycling and preservation of DNA in environmental samples in the future. A general protocol is outlined, along with recommendations for optimizing this general protocol for specific sample types and research goals. PMID:26042110

A distributed computing model for telemetry data processing

NASA Astrophysics Data System (ADS)

Barry, Matthew R.; Scott, Kevin L.; Weismuller, Steven P.

1994-05-01

We present a new approach to distributing processed telemetry data among spacecraft flight controllers within the control centers at NASA's Johnson Space Center. This approach facilitates the development of application programs which integrate spacecraft-telemetered data and ground-based synthesized data, then distributes this information to flight controllers for analysis and decision-making. The new approach combines various distributed computing models into one hybrid distributed computing model. The model employs both client-server and peer-to-peer distributed computing models cooperating to provide users with information throughout a diverse operations environment. Specifically, it provides an attractive foundation upon which we are building critical real-time monitoring and control applications, while simultaneously lending itself to peripheral applications in playback operations, mission preparations, flight controller training, and program development and verification. We have realized the hybrid distributed computing model through an information sharing protocol. We shall describe the motivations that inspired us to create this protocol, along with a brief conceptual description of the distributed computing models it employs. We describe the protocol design in more detail, discussing many of the program design considerations and techniques we have adopted. Finally, we describe how this model is especially suitable for supporting the implementation of distributed expert system applications.

A distributed computing model for telemetry data processing

NASA Technical Reports Server (NTRS)

Barry, Matthew R.; Scott, Kevin L.; Weismuller, Steven P.

1994-01-01

We present a new approach to distributing processed telemetry data among spacecraft flight controllers within the control centers at NASA's Johnson Space Center. This approach facilitates the development of application programs which integrate spacecraft-telemetered data and ground-based synthesized data, then distributes this information to flight controllers for analysis and decision-making. The new approach combines various distributed computing models into one hybrid distributed computing model. The model employs both client-server and peer-to-peer distributed computing models cooperating to provide users with information throughout a diverse operations environment. Specifically, it provides an attractive foundation upon which we are building critical real-time monitoring and control applications, while simultaneously lending itself to peripheral applications in playback operations, mission preparations, flight controller training, and program development and verification. We have realized the hybrid distributed computing model through an information sharing protocol. We shall describe the motivations that inspired us to create this protocol, along with a brief conceptual description of the distributed computing models it employs. We describe the protocol design in more detail, discussing many of the program design considerations and techniques we have adopted. Finally, we describe how this model is especially suitable for supporting the implementation of distributed expert system applications.

A Machine-to-Machine protocol benchmark for eHealth applications - Use case: Respiratory rehabilitation.

PubMed

Talaminos-Barroso, Alejandro; Estudillo-Valderrama, Miguel A; Roa, Laura M; Reina-Tosina, Javier; Ortega-Ruiz, Francisco

2016-06-01

M2M (Machine-to-Machine) communications represent one of the main pillars of the new paradigm of the Internet of Things (IoT), and is making possible new opportunities for the eHealth business. Nevertheless, the large number of M2M protocols currently available hinders the election of a suitable solution that satisfies the requirements that can demand eHealth applications. In the first place, to develop a tool that provides a benchmarking analysis in order to objectively select among the most relevant M2M protocols for eHealth solutions. In the second place, to validate the tool with a particular use case: the respiratory rehabilitation. A software tool, called Distributed Computing Framework (DFC), has been designed and developed to execute the benchmarking tests and facilitate the deployment in environments with a large number of machines, with independence of the protocol and performance metrics selected. DDS, MQTT, CoAP, JMS, AMQP and XMPP protocols were evaluated considering different specific performance metrics, including CPU usage, memory usage, bandwidth consumption, latency and jitter. The results obtained allowed to validate a case of use: respiratory rehabilitation of chronic obstructive pulmonary disease (COPD) patients in two scenarios with different types of requirement: Home-Based and Ambulatory. The results of the benchmark comparison can guide eHealth developers in the choice of M2M technologies. In this regard, the framework presented is a simple and powerful tool for the deployment of benchmark tests under specific environments and conditions. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

An extended smart utilization medium access control (ESU-MAC) protocol for ad hoc wireless systems

NASA Astrophysics Data System (ADS)

Vashishtha, Jyoti; Sinha, Aakash

2006-05-01

The demand for spontaneous setup of a wireless communication system has increased in recent years for areas like battlefield, disaster relief operations etc., where a pre-deployment of network infrastructure is difficult or unavailable. A mobile ad-hoc network (MANET) is a promising solution, but poses a lot of challenges for all the design layers, specifically medium access control (MAC) layer. Recent existing works have used the concepts of multi-channel and power control in designing MAC layer protocols. SU-MAC developed by the same authors, efficiently uses the 'available' data and control bandwidth to send control information and results in increased throughput via decreasing contention on the control channel. However, SU-MAC protocol was limited for static ad-hoc network and also faced the busy-receiver node problem. We present the Extended SU-MAC (ESU-MAC) protocol which works mobile nodes. Also, we significantly improve the scheme of control information exchange in ESU-MAC to overcome the busy-receiver node problem and thus, further avoid the blockage of control channel for longer periods of time. A power control scheme is used as before to reduce interference and to effectively re-use the available bandwidth. Simulation results show that ESU-MAC protocol is promising for mobile, ad-hoc network in terms of reduced contention at the control channel and improved throughput because of channel re-use. Results show a considerable increase in throughput compared to SU-MAC which could be attributed to increased accessibility of control channel and improved utilization of data channels due to superior control information exchange scheme.

Failure detection and recovery in the assembly/contingency subsystem

NASA Technical Reports Server (NTRS)

Gantenbein, Rex E.

1993-01-01

The Assembly/Contingency Subsystem (ACS) is the primary communications link on board the Space Station. Any failure in a component of this system or in the external devices through which it communicates with ground-based systems will isolate the Station. The ACS software design includes a failure management capability (ACFM) that provides protocols for failure detection, isolation, and recovery (FDIR). The the ACFM design requirements as outlined in the current ACS software requirements specification document are reviewed. The activities carried out in this review include: (1) an informal, but thorough, end-to-end failure mode and effects analysis of the proposed software architecture for the ACFM; and (2) a prototype of the ACFM software, implemented as a C program under the UNIX operating system. The purpose of this review is to evaluate the FDIR protocols specified in the ACS design and the specifications themselves in light of their use in implementing the ACFM. The basis of failure detection in the ACFM is the loss of signal between the ground and the Station, which (under the appropriate circumstances) will initiate recovery to restore communications. This recovery involves the reconfiguration of the ACS to either a backup set of components or to a degraded communications mode. The initiation of recovery depends largely on the criticality of the failure mode, which is defined by tables in the ACFM and can be modified to provide a measure of flexibility in recovery procedures.

Planning and setting objectives in field studies: Chapter 2

USGS Publications Warehouse

Fisher, Robert N.; Dodd, C. Kenneth

2016-01-01

This chapter enumerates the steps required in designing and planning field studies on the ecology and conservation of reptiles, as these involve a high level of uncertainty and risk. To this end, the chapter differentiates between goals (descriptions of what one intends to accomplish) and objectives (the measurable steps required to achieve the established goals). Thus, meeting a specific goal may require many objectives. It may not be possible to define some of them until certain experiments have been conducted; often evaluations of sampling protocols are needed to increase certainty in the biological results. And if sampling locations are fixed and sampling events are repeated over time, then both study-specific covariates and sampling-specific covariates should exist. Additionally, other critical design considerations for field study include obtaining permits, as well as researching ethics and biosecurity issues.

Design exploration and verification platform, based on high-level modeling and FPGA prototyping, for fast and flexible digital communication in physics experiments

NASA Astrophysics Data System (ADS)

Magazzù, G.; Borgese, G.; Costantino, N.; Fanucci, L.; Incandela, J.; Saponara, S.

2013-02-01

In many research fields as high energy physics (HEP), astrophysics, nuclear medicine or space engineering with harsh operating conditions, the use of fast and flexible digital communication protocols is becoming more and more important. The possibility to have a smart and tested top-down design flow for the design of a new protocol for control/readout of front-end electronics is very useful. To this aim, and to reduce development time, costs and risks, this paper describes an innovative design/verification flow applied as example case study to a new communication protocol called FF-LYNX. After the description of the main FF-LYNX features, the paper presents: the definition of a parametric SystemC-based Integrated Simulation Environment (ISE) for high-level protocol definition and validation; the set up of figure of merits to drive the design space exploration; the use of ISE for early analysis of the achievable performances when adopting the new communication protocol and its interfaces for a new (or upgraded) physics experiment; the design of VHDL IP cores for the TX and RX protocol interfaces; their implementation on a FPGA-based emulator for functional verification and finally the modification of the FPGA-based emulator for testing the ASIC chipset which implements the rad-tolerant protocol interfaces. For every step, significant results will be shown to underline the usefulness of this design and verification approach that can be applied to any new digital protocol development for smart detectors in physics experiments.

Research on low-latency MAC protocols for wireless sensor networks

NASA Astrophysics Data System (ADS)

He, Chenguang; Sha, Xuejun; Lee, Chankil

2007-11-01

Energy-efficient should not be the only design goal in MAC protocols for wireless sensor networks, which involve the use of battery-operated computing and sensing devices. Low-latency operation becomes the same important as energy-efficient in the case that the traffic load is very heavy or the real-time constrain is used in applications like tracking or locating. This paper introduces some causes of traditional time delays which are inherent in a multi-hops network using existing WSN MAC protocols, illuminates the importance of low-latency MAC design for wireless sensor networks, and presents three MACs as examples of low-latency protocols designed specially for sleep delay, wait delay and wakeup delay in wireless sensor networks, respectively. The paper also discusses design trade-offs with emphasis on low-latency and points out their advantages and disadvantages, together with some design considerations and suggestions for MAC protocols for future applications and researches.

SPP: A data base processor data communications protocol

NASA Technical Reports Server (NTRS)

Fishwick, P. A.

1983-01-01

The design and implementation of a data communications protocol for the Intel Data Base Processor (DBP) is defined. The protocol is termed SPP (Service Port Protocol) since it enables data transfer between the host computer and the DBP service port. The protocol implementation is extensible in that it is explicitly layered and the protocol functionality is hierarchically organized. Extensive trace and performance capabilities have been supplied with the protocol software to permit optional efficient monitoring of the data transfer between the host and the Intel data base processor. Machine independence was considered to be an important attribute during the design and implementation of SPP. The protocol source is fully commented and is included in Appendix A of this report.

Computational Design of DNA-Binding Proteins.

PubMed

Thyme, Summer; Song, Yifan

2016-01-01

Predicting the outcome of engineered and naturally occurring sequence perturbations to protein-DNA interfaces requires accurate computational modeling technologies. It has been well established that computational design to accommodate small numbers of DNA target site substitutions is possible. This chapter details the basic method of design used in the Rosetta macromolecular modeling program that has been successfully used to modulate the specificity of DNA-binding proteins. More recently, combining computational design and directed evolution has become a common approach for increasing the success rate of protein engineering projects. The power of such high-throughput screening depends on computational methods producing multiple potential solutions. Therefore, this chapter describes several protocols for increasing the diversity of designed output. Lastly, we describe an approach for building comparative models of protein-DNA complexes in order to utilize information from homologous sequences. These models can be used to explore how nature modulates specificity of protein-DNA interfaces and potentially can even be used as starting templates for further engineering.

Remote Memory Access Protocol Target Node Intellectual Property

NASA Technical Reports Server (NTRS)

Haddad, Omar

2013-01-01

The MagnetoSpheric Multiscale (MMS) mission had a requirement to use the Remote Memory Access Protocol (RMAP) over its SpaceWire network. At the time, no known intellectual property (IP) cores were available for purchase. Additionally, MMS preferred to implement the RMAP functionality with control over the low-level details of the design. For example, not all the RMAP standard functionality was needed, and it was desired to implement only the portions of the RMAP protocol that were needed. RMAP functionality had been previously implemented in commercial off-the-shelf (COTS) products, but the IP core was not available for purchase. The RMAP Target IP core is a VHDL (VHSIC Hardware Description Language description of a digital logic design suitable for implementation in an FPGA (field-programmable gate array) or ASIC (application-specific integrated circuit) that parses SpaceWire packets that conform to the RMAP standard. The RMAP packet protocol allows a network host to access and control a target device using address mapping. This capability allows SpaceWire devices to be managed in a standardized way that simplifies the hardware design of the device, as well as the development of the software that controls the device. The RMAP Target IP core has some features that are unique and not specified in the RMAP standard. One such feature is the ability to automatically abort transactions if the back-end logic does not respond to read/write requests within a predefined time. When a request times out, the RMAP Target IP core automatically retracts the request and returns a command response with an appropriate status in the response packet s header. Another such feature is the ability to control the SpaceWire node or router using RMAP transactions in the extended address range. This allows the SpaceWire network host to manage the SpaceWire network elements using RMAP packets, which reduces the number of protocols that the network host needs to support.

Network, system, and status software enhancements for the autonomously managed electrical power system breadboard. Volume 3: Commands specification

NASA Technical Reports Server (NTRS)

Mckee, James W.

1990-01-01

This volume (3 of 4) contains the specification for the command language for the AMPS system. The volume contains a requirements specification for the operating system and commands and a design specification for the operating system and command. The operating system and commands sits on top of the protocol. The commands are an extension of the present set of AMPS commands in that the commands are more compact, allow multiple sub-commands to be bundled into one command, and have provisions for identifying the sender and the intended receiver. The commands make no change to the actual software that implement the commands.

Compressed Natural Gas Vehicle Maintenance Facility Modification Handbook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, K.; Melendez, M.; Gonzales, J.

To ensure the safety of personnel and facilities, vehicle maintenance facilities are required by law and by guidelines of the National Fire Protection Association (NFPA) and the International Fire Code (IFC) to exhibit certain design features. They are also required to be fitted with certain fire protection equipment and devices because of the potential for fire or explosion in the event of fuel leakage or spills. All fuels have an explosion or fire potential if specific conditions are present. This handbook covers the primary elements that must be considered when developing a CNG vehicle maintenance facility design that will protectmore » against the ignition of natural gas releases. It also discusses specific protocols and training needed to ensure safety.« less

Microencapsulation of Corrosion Indicators for Smart Coatings

NASA Technical Reports Server (NTRS)

Li, Wenyan; Buhrow, Jerry W.; Jolley, Scott T.; Calle, Luz M.; Hanna,Joshua S.; Rawlins, James W.

2011-01-01

A multifunctional smart coating for the autonomous detection, indication, and control of corrosion is been developed based on microencapsulation technology. This paper summarizes the development, optimization, and testing of microcapsules specifically designed for early detection and indication of corrosion when incorporated into a smart coating. Results from experiments designed to test the ability of the microcapsules to detect and indicate corrosion, when blended into several paint systems, show that these experimental coatings generate a color change, indicative of spot specific corrosion events, that can be observed with the naked eye within hours rather than the hundreds of hours or months typical of the standard accelerated corrosion test protocols.. Key words: smart coating, corrosion detection, microencapsulation, microcapsule, pH-sensitive microcapsule, corrosion indicator, corrosion sensing paint

A Model Based Security Testing Method for Protocol Implementation

PubMed Central

Fu, Yu Long; Xin, Xiao Long

2014-01-01

The security of protocol implementation is important and hard to be verified. Since the penetration testing is usually based on the experience of the security tester and the specific protocol specifications, a formal and automatic verification method is always required. In this paper, we propose an extended model of IOLTS to describe the legal roles and intruders of security protocol implementations, and then combine them together to generate the suitable test cases to verify the security of protocol implementation. PMID:25105163

A model based security testing method for protocol implementation.

PubMed

Fu, Yu Long; Xin, Xiao Long

2014-01-01

The security of protocol implementation is important and hard to be verified. Since the penetration testing is usually based on the experience of the security tester and the specific protocol specifications, a formal and automatic verification method is always required. In this paper, we propose an extended model of IOLTS to describe the legal roles and intruders of security protocol implementations, and then combine them together to generate the suitable test cases to verify the security of protocol implementation.

Magnetic-Activated Cell Sorting for the Fast and Efficient Separation of Human and Rodent Schwann Cells from Mixed Cell Populations.

PubMed

Ravelo, Kristine M; Andersen, Natalia D; Monje, Paula V

2018-01-01

To date, magnetic-activated cell sorting (MACS) remains a powerful method to isolate distinct cell populations based on differential cell surface labeling. Optimized direct and indirect MACS protocols for cell immunolabeling are presented here as methods to divest Schwann cell (SC) cultures of contaminating cells (specifically, fibroblast cells) and isolate SC populations at different stages of differentiation. This chapter describes (1) the preparation of single-cell suspensions from established human and rat SC cultures, (2) the design and application of cell selection strategies using SC-specific (p75 NGFR , O4, and O1) and fibroblast-specific (Thy-1) markers, and (3) the characterization of both the pre- and post-sorting cell populations. A simple protocol for the growth of hybridoma cell cultures as a source of monoclonal antibodies for cell surface immunolabeling of SCs and fibroblasts is provided as a cost-effective alternative for commercially available products. These steps allow for the timely and efficient recovery of purified SC populations without compromising the viability and biological activity of the cells.

An alternative method to amplify RNA without loss of signal conservation for expression analysis with a proteinase DNA microarray in the ArrayTube format.

PubMed

Schüler, Susann; Wenz, Ingrid; Wiederanders, B; Slickers, P; Ehricht, R

2006-06-12

Recent developments in DNA microarray technology led to a variety of open and closed devices and systems including high and low density microarrays for high-throughput screening applications as well as microarrays of lower density for specific diagnostic purposes. Beside predefined microarrays for specific applications manufacturers offer the production of custom-designed microarrays adapted to customers' wishes. Array based assays demand complex procedures including several steps for sample preparation (RNA extraction, amplification and sample labelling), hybridization and detection, thus leading to a high variability between several approaches and resulting in the necessity of extensive standardization and normalization procedures. In the present work a custom designed human proteinase DNA microarray of lower density in ArrayTube format was established. This highly economic open platform only requires standard laboratory equipment and allows the study of the molecular regulation of cell behaviour by proteinases. We established a procedure for sample preparation and hybridization and verified the array based gene expression profile by quantitative real-time PCR (QRT-PCR). Moreover, we compared the results with the well established Affymetrix microarray. By application of standard labelling procedures with e.g. Klenow fragment exo-, single primer amplification (SPA) or In Vitro Transcription (IVT) we noticed a loss of signal conservation for some genes. To overcome this problem we developed a protocol in accordance with the SPA protocol, in which we included target specific primers designed individually for each spotted oligomer. Here we present a complete array based assay in which only the specific transcripts of interest are amplified in parallel and in a linear manner. The array represents a proof of principle which can be adapted to other species as well. As the designed protocol for amplifying mRNA starts from as little as 100 ng total RNA, it presents an alternative method for detecting even low expressed genes by microarray experiments in a highly reproducible and sensitive manner. Preservation of signal integrity is demonstrated out by QRT-PCR measurements. The little amounts of total RNA necessary for the analyses make this method applicable for investigations with limited material as in clinical samples from, for example, organ or tumour biopsies. Those are arguments in favour of the high potential of our assay compared to established procedures for amplification within the field of diagnostic expression profiling. Nevertheless, the screening character of microarray data must be mentioned, and independent methods should verify the results.

What is the best?: simple versus visitor restricted rest period.

PubMed

Silvius-Byron, Stephanie A; Florimonte, Christine; Panganiban, Elizabeth G; Ulmer, Janice Fitzgerald

2014-05-01

The aim of this study was to compare a highly structured planned rest protocol that includes visitor and healthcare personnel restrictions with a simple planned rest period that encourages patients to rest during a designated time without restriction of visitors and healthcare personnel. Many hospitals acute care have begun to restrict visitors and nonessential health team interventions during specific times despite the lack of experimentally designed studies. Using a convenience sample of 52 intermediate care unit patients, a randomized experimental design study compared a highly structured planned rest protocol with restriction of visitors/healthcare personnel to a simple planned rest period without restrictions. The primary outcome variable was the patient's perceived quality of rest after a 2-hour rest period. Intermediate care patients' perception of rest and sleep during a designated rest period was similar whether elaborate rest strategies were used, including visitor and healthcare personnel restrictions, or if it was only suggested they rest and the door to their room closed. The restriction of visitors and healthcare personnel during a 2-hour rest period did not improve the patient's perception of rest or how long it took them to go to sleep.

An application protocol for CAD to CAD transfer of electronic information

NASA Technical Reports Server (NTRS)

Azu, Charles C., Jr.

1993-01-01

The exchange of Computer Aided Design (CAD) information between dissimilar CAD systems is a problem. This is especially true for transferring electronics CAD information such as multi-chip module (MCM), hybrid microcircuit assembly (HMA), and printed circuit board (PCB) designs. Currently, there exists several neutral data formats for transferring electronics CAD information. These include IGES, EDIF, and DXF formats. All these formats have limitations for use in exchanging electronic data. In an attempt to overcome these limitations, the Navy's MicroCIM program implemented a project to transfer hybrid microcircuit design information between dissimilar CAD systems. The IGES (Initial Graphics Exchange Specification) format is used since it is well established within the CAD industry. The goal of the project is to have a complete transfer of microelectronic CAD information, using IGES, without any data loss. An Application Protocol (AP) is being developed to specify how hybrid microcircuit CAD information will be represented by IGES entity constructs. The AP defines which IGES data items are appropriate for describing HMA geometry, connectivity, and processing as well as HMA material characteristics.

Security and Privacy Preservation in Human-Involved Networks

NASA Astrophysics Data System (ADS)

Asher, Craig; Aumasson, Jean-Philippe; Phan, Raphael C.-W.

This paper discusses security within human-involved networks, with a focus on social networking services (SNS). We argue that more secure networks could be designed using semi-formal security models inspired from cryptography, as well as notions like that of ceremony, which exploits human-specific abilities and psychology to assist creating more secure protocols. We illustrate some of our ideas with the example of the SNS Facebook.

A second generation experiment in fault-tolerant software

NASA Technical Reports Server (NTRS)

Knight, J. C.

1986-01-01

The primary goal was to determine whether the application of fault tolerance to software increases its reliability if the cost of production is the same as for an equivalent nonfault tolerance version derived from the same requirements specification. Software development protocols are discussed. The feasibility of adapting to software design fault tolerance the technique of N-fold Modular Redundancy with majority voting was studied.

Desensitization Protocol in Recipients of Deceased Kidney Donor With Donor-Specific Antibody-Low Titers.

PubMed

Kanter Berga, J; Sancho Calabuig, A; Gavela Martinez, E; Puig Alcaraz, N; Avila Bernabeu, A; Crespo Albiach, J; Molina Vila, P; Beltrán Catalan, S; Pallardó Mateu, L

2016-11-01

Kidney transplantation is the better option for end-stage renal disease (ESRD), but for patients with human leukocyte antigen (HLA) sensitization, the wait times are significantly longer than for patients without antibodies. Many desensitization protocols have been described involving strong immunosuppression, the use of apheresis, and B-cell-modulating therapies. We have designed a desensitization protocol from day 0 for deceased donor kidney transplantation. Our aim was to present our initial experience with five kidney transplant patients. All patients had a negative complement-dependent cytotoxicity cross-match. The desensitization protocol included five to seven doses of thymoglobulin (1.25 mg/kg) and three sessions of plasmapheresis (PP) within the first week after transplantation, with intravenous immunoglobulin (500 mg/kg) after each PP session and one dose of rituximab on day 8. The presence of donor-specific antibodies (DSA) was analyzed by use of Luminex technology; levels between 1000 and 3000 mean fluorescence intensity were considered for desensitization. The median age was 44 years and median renal replacement therapy time was 9 years. All recipients presented 1 to 3 DSA specificities. There were no severe side effects related to PP, infusion of intravenous immunoglobulin, or rituximab. The median follow-up period was 19.3 months. Median serum creatinine level at last follow-up was 1.7 mg/dL. A kidney biopsy was performed in all patients. Graft and patient survival was 100%. Until now, few data are available concerning whether HLA-incompatible kidney transplantation after desensitization would benefit patients with ERSD. The desensitization strategy using the combination of PP, low doses of intravenous immunoglobulin, and rituximab at our center resulted in a satisfactory clinical outcome. Copyright © 2016 Elsevier Inc. All rights reserved.

Application of Metagenomic Sequencing to Food Safety: Detection of Shiga Toxin-Producing Escherichia coli on Fresh Bagged Spinach

PubMed Central

Leonard, Susan R.; Mammel, Mark K.; Lacher, David W.

2015-01-01

Culture-independent diagnostics reduce the reliance on traditional (and slower) culture-based methodologies. Here we capitalize on advances in next-generation sequencing (NGS) to apply this approach to food pathogen detection utilizing NGS as an analytical tool. In this study, spiking spinach with Shiga toxin-producing Escherichia coli (STEC) following an established FDA culture-based protocol was used in conjunction with shotgun metagenomic sequencing to determine the limits of detection, sensitivity, and specificity levels and to obtain information on the microbiology of the protocol. We show that an expected level of contamination (∼10 CFU/100 g) could be adequately detected (including key virulence determinants and strain-level specificity) within 8 h of enrichment at a sequencing depth of 10,000,000 reads. We also rationalize the relative benefit of static versus shaking culture conditions and the addition of selected antimicrobial agents, thereby validating the long-standing culture-based parameters behind such protocols. Moreover, the shotgun metagenomic approach was informative regarding the dynamics of microbial communities during the enrichment process, including initial surveys of the microbial loads associated with bagged spinach; the microbes found included key genera such as Pseudomonas, Pantoea, and Exiguobacterium. Collectively, our metagenomic study highlights and considers various parameters required for transitioning to such sequencing-based diagnostics for food safety and the potential to develop better enrichment processes in a high-throughput manner not previously possible. Future studies will investigate new species-specific DNA signature target regimens, rational design of medium components in concert with judicious use of additives, such as antibiotics, and alterations in the sample processing protocol to enhance detection. PMID:26386062

SITE-SPECIFIC PROTOCOL FOR MEASURING SOIL RADON POTENTIALS FOR FLORIDA HOUSES

EPA Science Inventory

The report describes a protocol for site-specific measurement of radon potentials for Florida houses that is consistent with existing residential radon protection maps. The protocol gives further guidance on the possible need for radon-protective house construction features. In a...

Specification and verification of gate-level VHDL models of synchronous and asynchronous circuits

NASA Technical Reports Server (NTRS)

Russinoff, David M.

1995-01-01

We present a mathematical definition of hardware description language (HDL) that admits a semantics-preserving translation to a subset of VHDL. Our HDL includes the basic VHDL propagation delay mechanisms and gate-level circuit descriptions. We also develop formal procedures for deriving and verifying concise behavioral specifications of combinational and sequential devices. The HDL and the specification procedures have been formally encoded in the computational logic of Boyer and Moore, which provides a LISP implementation as well as a facility for mechanical proof-checking. As an application, we design, specify, and verify a circuit that achieves asynchronous communication by means of the biphase mark protocol.

Cognitive Protocol Stack Design

DTIC Science & Technology

2015-12-30

SECURITY CLASSIFICATION OF: In the ARO “ Cognitive Protocol Stack Design" project we proposed cognitive networking solutions published in international...areas related to cognitive networking, opening also new lines of research that was not possible to forecast at the beginning of the project. In a...Distribution Unlimited Final Report: Cognitive Protocol Stack Design The views, opinions and/or findings contained in this report are those of the author(s

j5 DNA assembly design automation.

PubMed

Hillson, Nathan J

2014-01-01

Modern standardized methodologies, described in detail in the previous chapters of this book, have enabled the software-automated design of optimized DNA construction protocols. This chapter describes how to design (combinatorial) scar-less DNA assembly protocols using the web-based software j5. j5 assists biomedical and biotechnological researchers construct DNA by automating the design of optimized protocols for flanking homology sequence as well as type IIS endonuclease-mediated DNA assembly methodologies. Unlike any other software tool available today, j5 designs scar-less combinatorial DNA assembly protocols, performs a cost-benefit analysis to identify which portions of an assembly process would be less expensive to outsource to a DNA synthesis service provider, and designs hierarchical DNA assembly strategies to mitigate anticipated poor assembly junction sequence performance. Software integrated with j5 add significant value to the j5 design process through graphical user-interface enhancement and downstream liquid-handling robotic laboratory automation.

Abbreviated breast magnetic resonance protocol: Value of high-resolution temporal dynamic sequence to improve lesion characterization.

PubMed

Oldrini, Guillaume; Fedida, Benjamin; Poujol, Julie; Felblinger, Jacques; Trop, Isabelle; Henrot, Philippe; Darai, Emile; Thomassin-Naggara, Isabelle

2017-10-01

To evaluate the added value of ULTRAFAST-MR sequence to an abbreviated FAST protocol in comparison with FULL protocol to distinguish benign from malignant lesions in a population of women, regardless of breast MR imaging indication. From March 10th to September 22th, 2014, we retrospectively included a total of 70 consecutive patients with 106 histologically proven lesions (58 malignant and 48 benign) who underwent breast MR imaging for preoperative breast staging (n=38), high-risk screening (n=7), problem solving (n=18), and nipple discharge (n=4) with 12 time resolved imaging of contrast kinetics (TRICKS) acquisitions during contrast inflow interleaved in a regular high-resolution dynamic MRI protocol (FULL protocol). Two readers scored MR exams as either positive or negative and described significant lesions according to Bi-RADS lexicon with a TRICKS images (ULTRAFAST), an abbreviated protocol (FAST) and all images (FULL protocol). Sensitivity, specificity, positive and negative predictive values, and accuracy were calculated for each protocol and compared with McNemar's test. For all readers, the combined FAST-ULTRAFAST protocol significantly improved the reading with a specificity of 83.3% and 70.8% in comparison with FAST protocol or FULL protocol, respectively, without change in sensitivity. By adding ULTRAFAST protocol to FAST protocol, readers 1 and 2 were able to correctly change the diagnosis in 22.9% (11/48) and 10.4% (5/48) of benign lesions, without missing any malignancy, respectively. Both interpretation and image acquisition times for combined FAST-ULTRAFAST protocol and FAST protocol were shorter compared to FULL protocol (p<0.001). Compared to FULL protocol, adding ULTRAFAST to FAST protocol improves specificity, mainly in correctly reclassifying benign masses and reducing interpretation and acquisition time, without decreasing sensitivity. Copyright © 2017 Elsevier B.V. All rights reserved.

Development and evaluation of a study design typology for human research.

PubMed

Carini, Simona; Pollock, Brad H; Lehmann, Harold P; Bakken, Suzanne; Barbour, Edward M; Gabriel, Davera; Hagler, Herbert K; Harper, Caryn R; Mollah, Shamim A; Nahm, Meredith; Nguyen, Hien H; Scheuermann, Richard H; Sim, Ida

2009-11-14

A systematic classification of study designs would be useful for researchers, systematic reviewers, readers, and research administrators, among others. As part of the Human Studies Database Project, we developed the Study Design Typology to standardize the classification of study designs in human research. We then performed a multiple observer masked evaluation of active research protocols in four institutions according to a standardized protocol. Thirty-five protocols were classified by three reviewers each into one of nine high-level study designs for interventional and observational research (e.g., N-of-1, Parallel Group, Case Crossover). Rater classification agreement was moderately high for the 35 protocols (Fleiss' kappa = 0.442) and higher still for the 23 quantitative studies (Fleiss' kappa = 0.463). We conclude that our typology shows initial promise for reliably distinguishing study design types for quantitative human research.

The Ontology of Clinical Research (OCRe): An Informatics Foundation for the Science of Clinical Research

PubMed Central

Sim, Ida; Tu, Samson W.; Carini, Simona; Lehmann, Harold P.; Pollock, Brad H.; Peleg, Mor; Wittkowski, Knut M.

2013-01-01

To date, the scientific process for generating, interpreting, and applying knowledge has received less informatics attention than operational processes for conducting clinical studies. The activities of these scientific processes — the science of clinical research — are centered on the study protocol, which is the abstract representation of the scientific design of a clinical study. The Ontology of Clinical Research (OCRe) is an OWL 2 model of the entities and relationships of study design protocols for the purpose of computationally supporting the design and analysis of human studies. OCRe’s modeling is independent of any specific study design or clinical domain. It includes a study design typology and a specialized module called ERGO Annotation for capturing the meaning of eligibility criteria. In this paper, we describe the key informatics use cases of each phase of a study’s scientific lifecycle, present OCRe and the principles behind its modeling, and describe applications of OCRe and associated technologies to a range of clinical research use cases. OCRe captures the central semantics that underlies the scientific processes of clinical research and can serve as an informatics foundation for supporting the entire range of knowledge activities that constitute the science of clinical research. PMID:24239612

Electronic data collection for the analysis of surgical maneuvers on patients submitted to rhinoplasty

PubMed Central

Berger, Cezar; Freitas, Renato; Malafaia, Osvaldo; Pinto, José Simão de Paula; Mocellin, Marcos; Macedo, Evaldo; Fagundes, Marina Serrato Coelho

2012-01-01

Summary Introduction: In the health field, computerization has become increasingly necessary in professional practice, since it facilitates data recovery and assists in the development of research with greater scientific rigor. Objective: the present work aimed to develop, apply, and validate specific electronic protocols for patients referred for rhinoplasty. Methods: The prospective research had 3 stages: (1) preparation of theoretical data bases; (2) creation of a master protocol using Integrated System of Electronic Protocol (SINPE©); and (3) elaboration, application, and validation of a specific protocol for the nose and sinuses regarding rhinoplasty. Results: After the preparation of the master protocol, which dealt with the entire field of otorhinolaryngology, we idealized a specific protocol containing all matters related to the patient. In particular, the aesthetic and functional nasal complaints referred for surgical treatment (i.e., rhinoplasty) were organized into 6 main hierarchical categories: anamnesis, physical examination, complementary exams, diagnosis, treatment, and outcome. This protocol utilized these categories and their sub-items: finality; access; surgical maneuvers on the nasal dorsum, tip, and base; clinical evolution after 3, 6, and 12 months; revisional surgery; and quantitative and qualitative evaluations. Conclusion: The developed electronic-specific protocol is feasible and important for information registration from patients referred to rhinoplasty. PMID:25991979

Firewall Traversal for CORBA Applications Using an Implementation of Bidirectional IIOP in MICO

NASA Technical Reports Server (NTRS)

Griffin, Robert I.; Lopez, Isaac (Technical Monitor)

2002-01-01

The Object Management Group (OMG) has added specifications to the General Inter-ORB Protocol (GIOP 1.2), specifically the Internet Inter-ORB Protocol (IIOP 1.2), that allow servers and clients on opposing sides of a firewall to reverse roles and still communicate freely. This addition to the GIOP specifications is referred to as Bidirectional GIOP. The implementation of these specifications as applied to communication over TCP/IP connections is referred to as 'Bidirectional Internet Inter-ORB Protocol' or BiDirIIOP. This paper details the implementation and testing of the BiDirIIOP Specification in an open source ORB, MICO, that did not previously support Bidirectional GIOP. It also provides simple contextual information and a description of the OMG GIOP/IIOP messaging protocols.

A Tree Based Broadcast Scheme for (m, k)-firm Real-Time Stream in Wireless Sensor Networks.

PubMed

Park, HoSung; Kim, Beom-Su; Kim, Kyong Hoon; Shah, Babar; Kim, Ki-Il

2017-11-09

Recently, various unicast routing protocols have been proposed to deliver measured data from the sensor node to the sink node within the predetermined deadline in wireless sensor networks. In parallel with their approaches, some applications demand the specific service, which is based on broadcast to all nodes within the deadline, the feasible real-time traffic model and improvements in energy efficiency. However, current protocols based on either flooding or one-to-one unicast cannot meet the above requirements entirely. Moreover, as far as the authors know, there is no study for the real-time broadcast protocol to support the application-specific traffic model in WSN yet. Based on the above analysis, in this paper, we propose a new ( m , k )-firm-based Real-time Broadcast Protocol (FRBP) by constructing a broadcast tree to satisfy the ( m , k )-firm, which is applicable to the real-time model in resource-constrained WSNs. The broadcast tree in FRBP is constructed by the distance-based priority scheme, whereas energy efficiency is improved by selecting as few as nodes on a tree possible. To overcome the unstable network environment, the recovery scheme invokes rapid partial tree reconstruction in order to designate another node as the parent on a tree according to the measured ( m , k )-firm real-time condition and local states monitoring. Finally, simulation results are given to demonstrate the superiority of FRBP compared to the existing schemes in terms of average deadline missing ratio, average throughput and energy consumption.

A Protocol for Epigenetic Imprinting Analysis with RNA-Seq Data.

PubMed

Zou, Jinfeng; Xiang, Daoquan; Datla, Raju; Wang, Edwin

2018-01-01

Genomic imprinting is an epigenetic regulatory mechanism that operates through expression of certain genes from maternal or paternal in a parent-of-origin-specific manner. Imprinted genes have been identified in diverse biological systems that are implicated in some human diseases and in embryonic and seed developmental programs in plants. The molecular underpinning programs and mechanisms involved in imprinting are yet to be explored in depth in plants. The recent advances in RNA-Seq-based methods and technologies offer an opportunity to systematically analyze epigenetic imprinting that operates at the whole genome level in the model and crop plants. We are interested using Arabidopsis model system, to investigate gene expression patterns associated with parent of origin and their implications to imprinting during embryo and seed development. Toward this, we have generated early embryo development RNA-Seq-based transcriptome datasets in F1s from a genetic cross between two diverse Arabidopsis thaliana ecotypes Col-0 and Tsu-1. With the data, we developed a protocol for evaluating the maternal and paternal contributions of genes during the early stages of embryo development after fertilization. This protocol is also designed to consider the contamination from other potential seed tissues, sequencing quality, proper processing of sequenced reads and variant calling, and appropriate inference of the parental contributions based on the parent-of-origin-specific single-nucleotide polymorphisms within the expressed genes. The approach, methods and the protocol developed in this study can be used for evaluating the effects of epigenetic imprinting in plants.

Enhancing creative cognition with a rapid right-parietal neurofeedback procedure.

PubMed

Agnoli, Sergio; Zanon, Marco; Mastria, Serena; Avenanti, Alessio; Corazza, Giovanni Emanuele

2018-02-14

The present article describes an innovative neurofeedback training (NFT) procedure aimed at increasing creative cognition through the enhancement of specific brain activities previously associated with divergent thinking. We designed and tested two NFT protocols based on training alpha and beta EEG oscillations selectively measured over the right parietal region. A total of 80 participants were involved, 40 in the alpha NFT protocol and 40 in the beta NFT protocol. The NFT loop was closed on a video stream that would advance only when oscillation power exceeded a normalized threshold. The total duration of the protocol was two hours in a single day, hence its classification as rapid. Changes in ideational fluency and originality, measured with a divergent thinking task, were compared between participants receiving real video feedback and participants receiving sham feedback. We controlled for individual differences in creative achievement level. Results showed that the protocols were effective at enhancing alpha and beta activities in the targeted area. Differences between the two protocols emerged in their effectiveness at promoting divergent thinking. While no significant changes in originality resulted from the rapid alpha NFT, increases in both originality and fluency emerged as a consequence of the rapid beta NFT. These results were particularly evident in participants starting with a low creative achievement level. Possible interpretations and future directions are proposed and discussed. Copyright © 2018 Elsevier Ltd. All rights reserved.

Mechanical Stimulation Protocols of Human Derived Cells in Articular Cartilage Tissue Engineering - A Systematic Review.

PubMed

Khozoee, Baktash; Mafi, Pouya; Mafi, Reza; Khan, Wasim S

2017-01-01

Mechanical stimulation is a key factor in articular cartilage generation and maintenance. Bioreactor systems have been designed and built in order to deliver specific types of mechanical stimulation. The focus has been twofold, applying a type of preconditioning in order to stimulate cell differentiation, and to simulate in vivo conditions in order to gain further insight into how cells respond to different stimulatory patterns. Due to the complex forces at work within joints, it is difficult to simulate mechanical conditions using a bioreactor. The aim of this review is to gain a deeper understanding of the complexities of mechanical stimulation protocols by comparing those employed in bioreactors in the context of tissue engineering for articular cartilage, and to consider their effects on cultured cells. Allied and Complementary Medicine 1985 to 2016, Ovid MEDLINE[R] 1946 to 2016, and Embase 1974 to 2016 were searched using key terms. Results were subject to inclusion and exclusion criteria, key findings summarised into a table and subsequently discussed. Based on this review it is overwhelmingly clear that mechanical stimulation leads to increased chondrogenic properties in the context of bioreactor articular cartilage tissue engineering using human cells. However, given the variability and lack of controlled factors between research articles, results are difficult to compare, and a standardised method of evaluating stimulation protocols proved challenging. With improved standardisation in mechanical stimulation protocol reporting, bioreactor design and building processes, along with a better understanding of joint behaviours, we hope to perform a meta-analysis on stimulation protocols and methods. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Actions of the fall prevention protocol: mapping with the classification of nursing interventions.

PubMed

Alves, Vanessa Cristina; Freitas, Weslen Carlos Junior de; Ramos, Jeferson Silva; Chagas, Samantha Rodrigues Garbis; Azevedo, Cissa; Mata, Luciana Regina Ferreira da

2017-12-21

to analyze the correspondence between the actions contained in the fall prevention protocol of the Ministry of Health and the Nursing Interventions Classification (NIC) by a cross-mapping. this is a descriptive study carried out in four stages: protocol survey, identification of NIC interventions related to nursing diagnosis, the risk of falls, cross-mapping, and validation of the mapping from the Delphi technique. there were 51 actions identified in the protocol and 42 interventions in the NIC. Two rounds of mapping evaluation were carried out by the experts. There were 47 protocol actions corresponding to 25 NIC interventions. The NIC interventions that presented the highest correspondence with protocol actions were: fall prevention, environmental-safety control, and risk identification. Regarding the classification of similarity and comprehensiveness of the 47 actions of the protocol mapped, 44.7% were considered more detailed and specific than the NIC, 29.8% less specific than the NIC and 25.5% were classified as similar in significance to the NIC. most of the actions contained in the protocol are more specific and detailed, however, the NIC contemplates a greater diversity of interventions and may base a review of the protocol to increase actions related to falls prevention..

A new amperometric glucose microsensor: in vitro and short-term in vivo evaluation.

PubMed

Ward, W Kenneth; Jansen, Lawrence B; Anderson, Ellen; Reach, Gerard; Klein, Jean-Claude; Wilson, George S

2002-03-01

For biosensor fabrication, it is important to optimize materials and methods in order to create predictable function in vitro and in vivo. For this reason, we designed a new glucose sensor ('revised protocol') that utilized an outer permselective membrane made of amphiphobic polyurethane which allows glucose passage through hydrophilic segments. An inner polyethersulfone membrane, stabilized with a trimethoxysilane, provided specificity. Before application of the inner membrane, it was necessary to etch the platinum electrode with a radio frequency oxygen plasma. The revised protocol sensors (n=185) were compared with sensors fabricated with an earlier ('original') protocol (n=204) which used an outer polyurethane without hydrophilic segments and a complex inner membrane of cellulose acetate and Nafion. The function of revised protocol sensors was more predictable in vitro as evidenced by a much lower variation of glucose sensitivity than the original protocol sensors. Revised and original protocol sensors were nearly linear up to a glucose concentration of 20 mM. In vitro interference from 0.1 mM acetaminophen was minimal in both groups of sensors and would be expected to represent about 2% of the total sensor response at normal glucose levels for revised protocol sensors. Prolonged testing of the revised protocol sensors for 11 days during immersion in buffer revealed stable sensitivities (day 1: 6.12+/-1.34 nA/mM; day 3: 6.33+/-1.40; day 8: 7.13+/-1.39; and day 11: 7.56+/-1.47; sensitivity for day 1 vs. each other day: not significant) and no critical loss of glucose oxidase activity. The response of the revised protocol sensors (n=7) to intraperitoneal glucose was tested in rats approximately one day after subcutaneous implantation and the sensors tracked glucose closely with a slight lag of 3-6 min.

The activity of French research ethics committees and characteristics of biomedical research protocols involving humans: a retrospective cohort study.

PubMed

Decullier, Evelyne; Lhéritier, Véronique; Chapuis, François

2005-10-17

Clinical trials throughout the world must be evaluated by research ethics committees. No one has yet attempted to clearly quantify at the national level the activity of ethics committees and describe the characteristics of the protocols submitted. The objectives of this study were to describe 1) the workload and the activity of Research Ethics Committees in France, and 2) the characteristics of protocols approved on a nation-wide basis. Retrospective cohort of 976 protocols approved by a representative sample of 25/48 of French Research Ethics Committees in 1994. Protocols characteristics (design, study size, investigator), number of revisions requested by the ethics committee before approval, time to approval and number of amendments after approval were collected for each protocol by trained research assistant using the committee's files and archives. Thirty-one percent of protocols were approved with no modifications requested in 16 days (95% CI: 14-17). The number of revisions requested by the committee, and amendments submitted by the investigator was on average respectively 39 (95% CI: 25-53) and 37 (95% CI: 27-46), per committee and per year. When revisions were requested, the main reasons were related to information to the patient (28%) and consent modalities (18%). Drugs were the object of research in 68% of the protocols examined. The majority of the research was national (80%) with a predominance of single-centre studies. Workload per protocol has been estimated at twelve and half hours on average for administrative support and at eleven and half hours for expertise. The estimated workload justifies specific and independent administrative and financial support for Research Ethics Committees.

High-Intensity Interval Exercises' Acute Impact on Heart Rate Variability: Comparison Between Whole-Body and Cycle Ergometer Protocols.

PubMed

Schaun, Gustavo Z; Del Vecchio, Fabrício B

2018-01-01

Schaun, GZ and Del Vecchio, FB. High-intensity interval exercises' acute impact on heart rate variability: comparison between whole-body and cycle ergometer protocols. J Strength Cond Res 32(1): 223-229, 2018-Study aimed to compare the effects of 2 high-intensity interval training (HIIT) protocols on heart rate variability. Twelve young adult males (23.3 ± 3.9 years, 177.8 ± 7.4 cm, 76.9 ± 12.9 kg) volunteered to participate. In a randomized cross-over design, subjects performed 2 HIIT protocols, 1 on a cycle ergometer (Tabata protocol [TBT]; eight 20-second bouts at 170% Pmax interspersed by 10-second rest) and another with whole-body calisthenic exercises (McRae protocol; eight 20-second all-out intervals interspersed by 10-second rest). Heart rate variability outcomes in the time, frequency, and nonlinear domains were assessed on 3 moments: (a) presession; (b) immediately postsession; and (c) 24 hours postsession. Results revealed that RRmean, Ln rMSSD, Ln high frequency (HF), and Ln low frequency (LF) were significantly reduced immediately postsession (p ≤ 0.001) and returned to baseline 24 h after both protocols. In addition, LF/HF ratio was reduced 24 h postsession (p ≤ 0.01) and SD2 was significantly lower immediately postsession only in TBT. Our main finding was that responses from heart rate autonomic control were similar in both protocols, despite different modes of exercise performed. Specifically, exercises resulted in a high parasympathetic inhibition immediately after session with subsequent recovery within 1 day. These results suggest that subjects were already recovered the day after and can help coaches to better program training sessions with such protocols.

Effect of a feed/fast protocol on pH in the proximal equine stomach.

PubMed

Husted, L; Sanchez, L C; Baptiste, K E; Olsen, S N

2009-09-01

Risk factors for the development of gastric squamous ulcers include various management procedures, such as intermittent feed deprivation that can occur during weight management regimens or stall and dry lot confinement. To investigate the effect of intermittent feed deprivation relative to continuous feed intake on proximal intragastric pH, specifically in the region of the squamous mucosa of the lesser curvature. In 6 horses, pH electrodes were placed just inside of the oesophageal sphincter in the stomach for each of two 72 h protocols (A and B) in a randomised, cross-over design. Protocol A consisted of 12 h fed, 12 h fasted, 24 h fed and 24 h fasted, in sequence. Protocol B consisted of 72 h fed. During the fed periods of each protocol, horses had ad libitum access to coastal Bermuda hay and were fed sweet feed (1 kg, b.i.d.). Horses had ad libitum access to water at all times. Proximal intragastric pH was significantly lower during protocol A, than during protocol B. However, hourly mean pH was significantly different only during the day and evening hours between protocols. During protocol B, mean proximal pH decreased significantly from 03.00 to 09.00 compared to 19.00 to 23.00 h. A moderate positive correlation of hay intake vs. proximal gastric pH could be established. Intermittent feed deprivation decreased proximal gastric pH in horses relative to those horses for which feed was not restricted. However, the effect was only significant when fasting occurred during the day and evening hours, as a nocturnal decrease in pH occurred simultaneously in the fed horses. Episodes of daytime feed deprivation should be avoided if possible, as proximal gastric acid exposure rapidly increases during such events.

Improved diagnosis of common bile duct stone with single-shot balanced turbo field-echo sequence in MRCP.

PubMed

Noda, Yoshifumi; Goshima, Satoshi; Kojima, Toshihisa; Kawaguchi, Shimpei; Kawada, Hiroshi; Kawai, Nobuyuki; Koyasu, Hiromi; Matsuo, Masayuki; Bae, Kyongtae T

2017-04-01

To evaluate the value of adding single-shot balanced turbo field-echo (b-TFE) sequence to conventional magnetic resonance cholangiopancreatography (MRCP) for the detection of common bile duct (CBD) stone. One hundred thirty-seven consecutive patients with suspected CBD stone underwent MRCP including single-shot b-TFE sequence. Twenty-five patients were confirmed with CBD stone by endoscopic retrograde cholangiopancreatography or ultrasonography. Two radiologists reviewed two image protocols: protocol A (conventional MRCP protocol: unenhanced T1-, T2-, and respiratory-triggered three-dimensional fat-suppressed single-shot turbo spin-echo MRCP sequence) and protocol B (protocol A plus single-shot b-TFE sequence). The sensitivity, specificity, positive (PPV) and negative predictive value (NPV), and area under the receiver-operating-characteristic (ROC) curve (AUC) for the detection of CBD stone were compared. The sensitivity (72%) and NPV (94%) were the same between the two protocols. However, protocol B was greater in the specificity (99%) and PPV (94%) than protocol A (92% and 67%, respectively) (P = 0.0078 and 0.031, respectively). The AUC was significantly greater for protocol B (0.93) than for protocol A (0.86) (P = 0.026). Inclusion of single-shot b-TFE sequence to conventional MRCP significantly improved the specificity and PPV for the detection of CBD stone.

Group protocol to mitigate disaster stress and enhance social support in adolescents exposed to Hurricane Hugo.

PubMed

Stewart, J B; Hardin, S B; Weinrich, S; McGeorge, S; Lopez, J; Pesut, D

1992-01-01

Literature reports that cognitive understanding and social support can mitigate stress in both adults and adolescents. As a subcomponent of the Carolina Adolescent Health Project (CAHP), this research evaluated the efficacy of a Cognitive Social Support (CSS) group protocol designed to mitigate the disaster stress of adolescents who had been exposed seriously to Hurricane Hugo. A purposive sample of 259 students participated in and evaluated the CSS. This article reports the specific structure, content, process, rationale, and cost of the CSS. Evaluations indicated that 82% of the students evaluated the small-group component of the CSS as "very good" or "excellent," while 70% rated the large-group component as "very good" or "excellent."

Algorithm for planning a double-jaw orthognathic surgery using a computer-aided surgical simulation (CASS) protocol. Part 1: planning sequence

PubMed Central

Xia, J. J.; Gateno, J.; Teichgraeber, J. F.; Yuan, P.; Chen, K.-C.; Li, J.; Zhang, X.; Tang, Z.; Alfi, D. M.

2015-01-01

The success of craniomaxillofacial (CMF) surgery depends not only on the surgical techniques, but also on an accurate surgical plan. The adoption of computer-aided surgical simulation (CASS) has created a paradigm shift in surgical planning. However, planning an orthognathic operation using CASS differs fundamentally from planning using traditional methods. With this in mind, the Surgical Planning Laboratory of Houston Methodist Research Institute has developed a CASS protocol designed specifically for orthognathic surgery. The purpose of this article is to present an algorithm using virtual tools for planning a double-jaw orthognathic operation. This paper will serve as an operation manual for surgeons wanting to incorporate CASS into their clinical practice. PMID:26573562

Detection of VEGF-A(xxx)b isoforms in human tissues.

PubMed

Bates, David O; Mavrou, Athina; Qiu, Yan; Carter, James G; Hamdollah-Zadeh, Maryam; Barratt, Shaney; Gammons, Melissa V; Millar, Ann B; Salmon, Andrew H J; Oltean, Sebastian; Harper, Steven J

2013-01-01

Vascular Endothelial Growth Factor-A (VEGF-A) can be generated as multiple isoforms by alternative splicing. Two families of isoforms have been described in humans, pro-angiogenic isoforms typified by VEGF-A165a, and anti-angiogenic isoforms typified by VEGF-A165b. The practical determination of expression levels of alternative isoforms of the same gene may be complicated by experimental protocols that favour one isoform over another, and the use of specific positive and negative controls is essential for the interpretation of findings on expression of the isoforms. Here we address some of the difficulties in experimental design when investigating alternative splicing of VEGF isoforms, and discuss the use of appropriate control paradigms. We demonstrate why use of specific control experiments can prevent assumptions that VEGF-A165b is not present, when in fact it is. We reiterate, and confirm previously published experimental design protocols that demonstrate the importance of using positive controls. These include using known target sequences to show that the experimental conditions are suitable for PCR amplification of VEGF-A165b mRNA for both q-PCR and RT-PCR and to ensure that mispriming does not occur. We also provide evidence that demonstrates that detection of VEGF-A165b protein in mice needs to be tightly controlled to prevent detection of mouse IgG by a secondary antibody. We also show that human VEGF165b protein can be immunoprecipitated from cultured human cells and that immunoprecipitating VEGF-A results in protein that is detected by VEGF-A165b antibody. These findings support the conclusion that more information on the biology of VEGF-A165b isoforms is required, and confirm the importance of the experimental design in such investigations, including the use of specific positive and negative controls.

Riparian buffer design guidelines for water quality and wildlife habitat functions on agricultural landscapes in the Intermountain West: Case Study

Treesearch

Craig W. Johnson; Susan Buffler

2008-01-01

This hypothetical case study illustrates how the riparian buffer planning protocol described in the RB handbook is used to plan a buffer for both water quality and wildlife conservation on a specific project site. The case study site includes riparian buffer characteristics typical of the study area-variable topography and soils, flood plain wetlands, seeps, springs,...

Understanding Skill in EVA Mass Handling. Volume 2; Empirical Investigation

NASA Technical Reports Server (NTRS)

Riccio, Gary; McDonald, Vernon; Peters, Brian; Layne, Charles; Bloomberg, Jacob

1997-01-01

In this report we describe the details of our empirical protocol effort investigating skill in extravehicular mass handling using NASA's principal mass handling simulator, the precision air bearing floor. Contents of this report include a description of the necessary modifications to the mass handling simulator; choice of task, and the description of an operationally relevant protocol. Our independent variables are presented in the context of the specific operational issues they were designed to simulate. The explanation of our dependent variables focuses on the specific data processing procedures used to transform data from common laboratory instruments into measures that are relevant to a special class of nested control systems (discussed in Volume 1): manual interactions between an individual and the substantial environment. The data reduction is explained in the context of the theoretical foundation described in Volume 1. Finally as a preface to the presentation of the empirical data in Volume 3 of this report series, a set of detailed hypotheses is presented.

Using Ontologies to Formalize Services Specifications in Multi-Agent Systems

NASA Technical Reports Server (NTRS)

Breitman, Karin Koogan; Filho, Aluizio Haendchen; Haeusler, Edward Hermann

2004-01-01

One key issue in multi-agent systems (MAS) is their ability to interact and exchange information autonomously across applications. To secure agent interoperability, designers must rely on a communication protocol that allows software agents to exchange meaningful information. In this paper we propose using ontologies as such communication protocol. Ontologies capture the semantics of the operations and services provided by agents, allowing interoperability and information exchange in a MAS. Ontologies are a formal, machine processable, representation that allows to capture the semantics of a domain and, to derive meaningful information by way of logical inference. In our proposal we use a formal knowledge representation language (OWL) that translates into Description Logics (a subset of first order logic), thus eliminating ambiguities and providing a solid base for machine based inference. The main contribution of this approach is to make the requirements explicit, centralize the specification in a single document (the ontology itself), at the same that it provides a formal, unambiguous representation that can be processed by automated inference machines.

Layer-by-layer assembly of patchy particles as a route to nontrivial structures

NASA Astrophysics Data System (ADS)

Patra, Niladri; Tkachenko, Alexei V.

2017-08-01

We propose a strategy for robust high-quality self-assembly of nontrivial periodic structures out of patchy particles and investigate it with Brownian dynamics simulations. Its first element is the use of specific patch-patch and shell-shell interactions between the particles, which can be implemented through differential functionalization of patched and shell regions with specific DNA strands. The other key element of our approach is the use of a layer-by-layer protocol that allows one to avoid the formation of undesired random aggregates. As an example, we design and self-assemble in silico a version of a double diamond lattice in which four particle types are arranged into bcc crystal made of four fcc sublattices. The lattice can be further converted to cubic diamond by selective removal of the particles of certain types. Our results demonstrate that by combining the directionality, selectivity of interactions, and the layer-by-layer protocol, a high-quality robust self-assembly can be achieved.

All-in-One CRISPR-Cas9/FokI-dCas9 Vector-Mediated Multiplex Genome Engineering in Cultured Cells.

PubMed

Sakuma, Tetsushi; Sakamoto, Takuya; Yamamoto, Takashi

2017-01-01

CRISPR-Cas9 enables highly convenient multiplex genome engineering in cultured cells, because it utilizes generic Cas9 nuclease and an easily customizable single-guide RNA (sgRNA) for site-specific DNA double-strand break induction. We previously established a multiplex CRISPR-Cas9 assembly system for constructing an all-in-one vector simultaneously expressing multiple sgRNAs and Cas9 nuclease or other Cas9 variants including FokI-dCas9, which supersedes the wild-type Cas9 with regard to high specificity. In this chapter, we describe a streamlined protocol to design and construct multiplex CRISPR-Cas9 or FokI-dCas9 vectors, to introduce them into cultured cells by lipofection or electroporation, to enrich the genomically edited cells with a transient puromycin selection, to validate the mutation efficiency by Surveyor nuclease assay, and to perform off-target analyses. We show that our protocol enables highly efficient multiplex genome engineering even in hard-to-transfect HepG2 cells.

A novel assay to identify the trafficking proteins that bind to specific vesicle populations

PubMed Central

Bentley, Marvin; Banker, Gary

2016-01-01

Here we describe a method capable of identifying interactions between candidate trafficking proteins and a defined vesicle population in intact cells. The assay involves the expression of an FKBP12-rapamycin–binding domain (FRB)–tagged candidate vesicle-binding protein that can be inducibly linked to an FKBP-tagged molecular motor. If the FRB-tagged candidate protein binds the labeled vesicles, then linking the FRB and FKBP domains recruits motors to the vesicles and causes a predictable, highly distinctive change in vesicle trafficking. We describe two versions of the assay: a general protocol for use in cells with a typical microtubule-organizing center and a specialized protocol designed to detect protein-vesicle interactions in cultured neurons. We have successfully used this assay to identify kinesins and Rabs that bind to a variety of different vesicle populations. In principle, this assay could be used to investigate interactions between any category of vesicle trafficking proteins and any vesicle population that can be specifically labeled. PMID:26621371

Layer-by-layer assembly of patchy particles as a route to nontrivial structures

DOE PAGES

Patra, Niladri; Tkachenko, Alexei V.

2017-08-02

Here, we propose a strategy for robust high-quality self-assembly of nontrivial periodic structures out of patchy particles and investigate it with Brownian dynamics simulations. Its first element is the use of specific patch-patch and shell-shell interactions between the particles, which can be implemented through differential functionalization of patched and shell regions with specific DNA strands. The other key element of our approach is the use of a layer-by-layer protocol that allows one to avoid the formation of undesired random aggregates. As an example, we design and self-assemble in silico a version of a double diamond lattice in which four particlemore » types are arranged into bcc crystal made of four fcc sublattices. The lattice can be further converted to cubic diamond by selective removal of the particles of certain types. These results demonstrate that by combining the directionality, selectivity of interactions, and the layer-by-layer protocol, a high-quality robust self-assembly can be achieved.« less

Ultrasensitive electrochemical detection of nucleic acids by template enhanced hybridization followed with rolling circle amplification.

PubMed

Ji, Hanxu; Yan, Feng; Lei, Jianping; Ju, Huangxian

2012-08-21

An ultrasensitive protocol for electrochemical detection of DNA is designed with quantum dots (QDs) as a signal tag by combining the template enhanced hybridization process (TEHP) and rolling circle amplification (RCA). Upon the recognition of the molecular beacon (MB) to target DNA, the MB hybridizes with assistants and target DNA to form a ternary ''Y-junction''. The target DNA can be dissociated from the structure under the reaction of nicking endonuclease to initiate the next hybridization process. The template enhanced MB fragments further act as the primers of the RCA reaction to produce thousands of repeated oligonucleotide sequences, which can bind with oligonucleotide functionalized QDs. The attached signal tags can be easily read out by square-wave voltammetry after dissolving with acid. Because of the cascade signal amplification and the specific TEHP and RCA reaction, this newly designed protocol provides an ultrasensitive electrochemical detection of DNA down to the attomolar level (11 aM) with a linear range of 6 orders of magnitude (from 1 × 10(-17) to 1 × 10(-11) M) and can discriminate mismatched DNA from perfect matched target DNA with high selectivity. The high sensitivity and specificity make this method a great potential for early diagnosis in gene-related diseases.

Long‐term exercise‐specific neuroprotection in spinal muscular atrophy‐like mice

PubMed Central

Chali, Farah; Desseille, Céline; Houdebine, Léo; Benoit, Evelyne; Rouquet, Thaïs; Bariohay, Bruno; Lopes, Philippe; Branchu, Julien; Della Gaspera, Bruno; Pariset, Claude; Chanoine, Christophe; Charbonnier, Frédéric

2016-01-01

Key points The real impact of physical exercise parameters, i.e. intensity, type of contraction and solicited energetic metabolism, on neuroprotection in the specific context of neurodegeneration remains poorly explored.In this study behavioural, biochemical and cellular analyses were conducted to compare the effects of two different long‐term exercise protocols, high intensity swimming and low intensity running, on motor units of a type 3 spinal muscular atrophy (SMA)‐like mouse model.Our data revealed a preferential SMA‐induced death of intermediate and fast motor neurons which was limited by the swimming protocol only, suggesting a close relationship between neuron‐specific protection and their activation levels by specific exercise.The exercise‐induced neuroprotection was independent of SMN protein expression and associated with specific metabolic and behavioural adaptations with notably a swimming‐induced reduction of muscle fatigability.Our results provide new insight into the motor units’ adaptations to different physical exercise parameters and will contribute to the design of new active physiotherapy protocols for patient care. Abstract Spinal muscular atrophy (SMA) is a group of autosomal recessive neurodegenerative diseases differing in their clinical outcome, characterized by the specific loss of spinal motor neurons, caused by insufficient level of expression of the protein survival of motor neuron (SMN). No cure is at present available for SMA. While physical exercise might represent a promising approach for alleviating SMA symptoms, the lack of data dealing with the effects of different exercise types on diseased motor units still precludes the use of active physiotherapy in SMA patients. In the present study, we have evaluated the efficiency of two long‐term physical exercise paradigms, based on either high intensity swimming or low intensity running, in alleviating SMA symptoms in a mild type 3 SMA‐like mouse model. We found that 10 months’ physical training induced significant benefits in terms of resistance to muscle damage, energetic metabolism, muscle fatigue and motor behaviour. Both exercise types significantly enhanced motor neuron survival, independently of SMN expression, leading to the maintenance of neuromuscular junctions and skeletal muscle phenotypes, particularly in the soleus, plantaris and tibialis of trained mice. Most importantly, both exercises significantly improved neuromuscular excitability properties. Further, all these training‐induced benefits were quantitatively and qualitatively related to the specific characteristics of each exercise, suggesting that the related neuroprotection is strongly dependent on the specific activation of some motor neuron subpopulations. Taken together, the present data show significant long‐term exercise benefits in type 3 SMA‐like mice providing important clues for designing rehabilitation programmes in patients. PMID:26915343

Influence of custom-made implant designs on the biomechanical performance for the case of immediate post-extraction placement in the maxillary esthetic zone: a finite element analysis.

PubMed

Chen, Jianyu; Zhang, Zhiguang; Chen, Xianshuai; Zhang, Xiao

2017-05-01

Due to the increasing adoption of immediate implantation strategies and the rapid development of the computer aided design/computer aided manufacturing technology, a therapeutic concept based on patient-specific implant dentistry has recently been reintroduced by many researchers. However, little information is available on the designs of custom-made dental implant systems, especially their biomechanical behavior. The influence of the custom-made implant designs on the biomechanical performance for both an immediate and a delayed loading protocol in the maxillary esthetic zone was evaluated by means of the finite element (FE) method. FE models of three dental implants were considered: a state of the art cylindrical implant and two custom-made implants designed by reverse engineering technology, namely a root-analogue implant and a root-analogue threaded implant. The von Mises stress distributions and micro-motions around the bone-implant interfaces were calculated using ANSYS software. In a comparison of the three implant designs for both loading protocols, a favorable biomechanical performance was observed for the use of root-analogue threaded implant which approximated the geometry of natural anterior tooth and maintained the original long-axis. The results indicated that bone-implant interfacial micro-motion was reduced and a favorable stress distribution after osseointegration was achieved.

Chemical Functionalization of Plasmonic Surface Biosensors: A Tutorial Review on Issues, Strategies, and Costs

PubMed Central

2017-01-01

In an ideal plasmonic surface sensor, the bioactive area, where analytes are recognized by specific biomolecules, is surrounded by an area that is generally composed of a different material. The latter, often the surface of the supporting chip, is generally hard to be selectively functionalized, with respect to the active area. As a result, cross talks between the active area and the surrounding one may occur. In designing a plasmonic sensor, various issues must be addressed: the specificity of analyte recognition, the orientation of the immobilized biomolecule that acts as the analyte receptor, and the selectivity of surface coverage. The objective of this tutorial review is to introduce the main rational tools required for a correct and complete approach to chemically functionalize plasmonic surface biosensors. After a short introduction, the review discusses, in detail, the most common strategies for achieving effective surface functionalization. The most important issues, such as the orientation of active molecules and spatial and chemical selectivity, are considered. A list of well-defined protocols is suggested for the most common practical situations. Importantly, for the reported protocols, we also present direct comparisons in term of costs, labor demand, and risk vs benefit balance. In addition, a survey of the most used characterization techniques necessary to validate the chemical protocols is reported. PMID:28796479

Efficacy and cost effectiveness of telemedicine for improving access to care in the Paris region: study protocols for eight trials.

PubMed

Charrier, Nathanael; Zarca, Kevin; Durand-Zaleski, Isabelle; Calinaud, Christine

2016-02-08

With the development of information and communication technologies, telemedicine has been proposed as a way to improve patient management by facilitating access to appropriate diagnosis and treatment. The Paris Ile de France Regional Health Agency is currently funding a comprehensive program of telemedicine experiments. This article describes the protocols for the evaluation of the implementation of telemedicine in the Paris region. Over 2,500 patients have been included in eight studies addressing the use of telemedicine in the context of specific diseases or settings. Two projects are randomized controlled trials, while the six other projects are based on before-after designs (differences in differences studies). Based on the MAST model and the French national framework, we identified endpoints to assess the impact of telemedicine on five dimensions: clinical effectiveness, cost-effectiveness, security of the application, patient satisfaction and quality of life and perception of professionals. Telemedicine encompasses a wide range of services and stakeholders, and thus study protocols must be tailored to the specific constraints and interests of the users. NCT02110433 (03/07/2014), NCT02157740 (05/27/2014), NCT02374697 (02/05/2015), NCT02157727 (05/27/2014), NCT02229279 (08/28/2014), NCT02368769 (02/05/2015), NCT02164747 (NCT02164747), NCT02309905 (11/27/2014).

Induction of complex immune responses and strong protection against retrovirus challenge by adenovirus-based immunization depends on the order of vaccine delivery.

PubMed

Kaulfuß, Meike; Wensing, Ina; Windmann, Sonja; Hrycak, Camilla Patrizia; Bayer, Wibke

2017-02-06

In the Friend retrovirus mouse model we developed potent adenovirus-based vaccines that were designed to induce either strong Friend virus GagL 85-93 -specific CD8 + T cell or antibody responses, respectively. To optimize the immunization outcome we evaluated vaccination strategies using combinations of these vaccines. While the vaccines on their own confer strong protection from a subsequent Friend virus challenge, the simple combination of the vaccines for the establishment of an optimized immunization protocol did not result in a further improvement of vaccine effectivity. We demonstrate that the co-immunization with GagL 85-93 /leader-gag encoding vectors together with envelope-encoding vectors abrogates the induction of GagL 85-93 -specific CD8 + T cells, and in successive immunization protocols the immunization with the GagL 85-93 /leader-gag encoding vector had to precede the immunization with an envelope encoding vector for the efficient induction of GagL 85-93 -specific CD8 + T cells. Importantly, the antibody response to envelope was in fact enhanced when the mice were adenovirus-experienced from a prior immunization, highlighting the expedience of this approach. To circumvent the immunosuppressive effect of envelope on immune responses to simultaneously or subsequently administered immunogens, we developed a two immunizations-based vaccination protocol that induces strong immune responses and confers robust protection of highly Friend virus-susceptible mice from a lethal Friend virus challenge.

Generation of polyhormonal and multipotent pancreatic progenitor lineages from human pluripotent stem cells.

PubMed

Korytnikov, Roman; Nostro, Maria Cristina

2016-05-15

Generation of pancreatic β-cells from human pluripotent stem cells (hPSCs) has enormous importance in type 1 diabetes (T1D), as it is fundamental to a treatment strategy based on cellular therapeutics. Being able to generate β-cells, as well as other mature pancreatic cells, from human embryonic stem cells (hESCs) and human induced pluripotent stem cells (hiPSCs) will also enable the development of platforms that can be used for disease modeling and drug testing for a variety of pancreas-associated diseases, including cystic fibrosis. For this to occur, it is crucial to develop differentiation strategies that are robust and reproducible across cell lines and laboratories. In this article we describe two serum-free differentiation protocols designed to generate specific pancreatic lineages from hPSCs. Our approach employs a variety of cytokines and small molecules to mimic developmental pathways active during pancreatic organogenesis and allows for the in vitro generation of distinct pancreatic populations. The first protocol is designed to give rise to polyhormonal cells that have the potential to differentiate into glucagon-producing cells. The second protocol is geared to generate multipotent pancreatic progenitor cells, which harbor the potential to generate all pancreatic lineages including: monohormonal endocrine cells, acinar, and ductal cells. Copyright © 2016 Elsevier Inc. All rights reserved.

Throughput analysis of the IEEE 802.4 token bus standard under heavy load

NASA Technical Reports Server (NTRS)

Pang, Joseph; Tobagi, Fouad

1987-01-01

It has become clear in the last few years that there is a trend towards integrated digital services. Parallel to the development of public Integrated Services Digital Network (ISDN) is service integration in the local area (e.g., a campus, a building, an aircraft). The types of services to be integrated depend very much on the specific local environment. However, applications tend to generate data traffic belonging to one of two classes. According to IEEE 802.4 terminology, the first major class of traffic is termed synchronous, such as packetized voice and data generated from other applications with real-time constraints, and the second class is called asynchronous which includes most computer data traffic such as file transfer or facsimile. The IEEE 802.4 token bus protocol which was designed to support both synchronous and asynchronous traffic is examined. The protocol is basically a timer-controlled token bus access scheme. By a suitable choice of the design parameters, it can be shown that access delay is bounded for synchronous traffic. As well, the bandwidth allocated to asynchronous traffic can be controlled. A throughput analysis of the protocol under heavy load with constant channel occupation of synchronous traffic and constant token-passing times is presented.

The importance of quality control in validating concentrations ...

EPA Pesticide Factsheets

A national-scale survey of 247 contaminants of emerging concern (CECs), including organic and inorganic chemical compounds, and microbial contaminants, was conducted in source and treated drinking water samples from 25 treatment plants across the United States. Multiple methods were used to determine these CECs, including six analytical methods to measure 174 pharmaceuticals, personal care products, and pesticides. A three-component quality assurance/quality control (QA/QC) program was designed for the subset of 174 CECs which allowed us to assess and compare performances of the methods used. The three components included: 1) a common field QA/QC protocol and sample design, 2) individual investigator-developed method-specific QA/QC protocols, and 3) a suite of 46 method comparison analytes that were determined in two or more analytical methods. Overall method performance for the 174 organic chemical CECs was assessed by comparing spiked recoveries in reagent, source, and treated water over a two-year period. In addition to the 247 CECs reported in the larger drinking water study, another 48 pharmaceutical compounds measured did not consistently meet predetermined quality standards. Methodologies that did not seem suitable for these analytes are overviewed. The need to exclude analytes based on method performance demonstrates the importance of additional QA/QC protocols. This paper compares the method performance of six analytical methods used to measure 174 emer

Considerations in establishing a post-mortem brain and tissue bank for the study of myalgic encephalomyelitis/chronic fatigue syndrome: a proposed protocol

PubMed Central

2014-01-01

Background Our aim, having previously investigated through a qualitative study involving extensive discussions with experts and patients the issues involved in establishing and maintaining a disease specific brain and tissue bank for myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS), was to develop a protocol for a UK ME/CFS repository of high quality human tissue from well characterised subjects with ME/CFS and controls suitable for a broad range of research applications. This would involve a specific donor program coupled with rapid tissue collection and processing, supplemented by comprehensive prospectively collected clinical, laboratory and self-assessment data from cases and controls. Findings We reviewed the operations of existing tissue banks from published literature and from their internal protocols and standard operating procedures (SOPs). On this basis, we developed the protocol presented here, which was designed to meet high technical and ethical standards and legal requirements and was based on recommendations of the MRC UK Brain Banks Network. The facility would be most efficient and cost-effective if incorporated into an existing tissue bank. Tissue collection would be rapid and follow robust protocols to ensure preservation sufficient for a wide range of research uses. A central tissue bank would have resources both for wide-scale donor recruitment and rapid response to donor death for prompt harvesting and processing of tissue. Conclusion An ME/CFS brain and tissue bank could be established using this protocol. Success would depend on careful consideration of logistic, technical, legal and ethical issues, continuous consultation with patients and the donor population, and a sustainable model of funding ideally involving research councils, health services, and patient charities. This initiative could revolutionise the understanding of this still poorly-understood disease and enhance development of diagnostic biomarkers and treatments. PMID:24938650

Evaluation of two clinical protocols for the management of women with vaginal discharge in southern Thailand

PubMed Central

Chandeying, V.; Skov, S.; Kemapunmanus, M.; Law, M.; Geater, A.; Rowe, P.

1998-01-01

OBJECTIVES: (1) To compare the effectiveness of two clinical protocols for the management of vaginal discharge in the situations where no laboratory facilities are available but speculum examination is possible and where basic laboratory facilities are available. (2) To determine clinical and simple laboratory indicators for diagnosis of patients with vaginal discharge in the local setting. DESIGN: Alternate allocation of subjects to one of two management protocols. SUBJECTS: Women presenting to university gynaecology outpatients department with a complaint of vaginal discharge. METHODS: Subjects were alternately allocated management according to one of two protocols: one without (group A) and one with (group B) immediate access to results of basic laboratory tests. Full clinical assessment including speculum examination and microbiological assessment for infection with gonorrhoea, chlamydia, candida, trichomonas, and bacterial vaginosis was performed on all women. Follow up assessment of clinical and microbiological response was performed 1-2 weeks later. RESULTS: At initial assessment, both groups were similar in all respects except that more group B women had inflammation of the vulva. The prevalences of various conditions were: candidiasis 22%, bacterial vaginosis 38%, trichomoniasis 4%, chlamydia 4%, gonorrhoea 0.4%. There was no association between any demographic characteristic and diagnosis of cause of the discharge. Both protocols resulted in clinically and statistically significant improvements for women with candidiasis, bacterial vaginosis, and trichomoniasis. There were no clinically important differences in outcomes between the two protocols. The sensitivities and specificities of various indicators were: curd-like vaginal discharge for candidiasis, 72% and 100%; homogeneous vaginal discharge for bacterial vaginosis or trichomoniasis, 94% and 88%; absent or scanty lactobacilli for bacterial vaginosis, 99% and 68%; > 20% clue cells for bacterial vaginosis, 81% and 99%; visible endocervical mucopus for chlamydia or gonorrhoea, 36% and 86%; microscopic endocervical mucopus for chlamydia or gonorrhoea, 64% and 69%. CONCLUSIONS: Both protocols were equally effective in managing women with abnormal vaginal discharge. Simple clinical indicators for candidiasis, bacterial vaginosis, or trichomonas as in protocol A are sufficiently sensitive and specific for use in situations with no laboratory support. A modification to protocol A could increase detection of bacterial vaginosis at basic health service level. Further work is needed to identify appropriate indicators for infection with chlamydia or gonorrhoea. 


 PMID:9849555

Orbital Reconstruction: Patient-Specific Orbital Floor Reconstruction Using a Mirroring Technique and a Customized Titanium Mesh.

PubMed

Tarsitano, Achille; Badiali, Giovanni; Pizzigallo, Angelo; Marchetti, Claudio

2016-10-01

Enophthalmos is a severe complication of primary reconstruction of orbital floor fractures. The goal of secondary reconstruction procedures is to restore symmetrical globe positions to recover function and aesthetics. The authors propose a new method of orbital floor reconstruction using a mirroring technique and a customized titanium mesh, printed using a direct metal laser-sintering method. This reconstructive protocol involves 4 steps: mirroring of the healthy orbit at the affected site, virtual design of a patient-specific orbital floor mesh, CAM procedures for direct laser-sintering of the customized titanium mesh, and surgical insertion of the device. Using a computed tomography data set, the normal, uninjured side of the craniofacial skeleton was reflected onto the contralateral injured side, and a reconstructive orbital floor mesh was designed virtually on the mirrored orbital bone surface. The solid-to-layer files of the mesh were then manufactured using direct metal laser sintering, which resolves the shaping and bending biases inherent in the indirect method. An intraoperative navigation system ensured accuracy of the entire procedure. Clinical outcomes were assessed using 3dMD photogrammetry and computed tomography data in 7 treated patients. The technique described here appears to be a viable method to correct complex orbital floor defects needing delayed reconstruction. This study represents the first step in the development of a wider experimental protocol for orbital floor reconstruction using computer-assisted design-computer-assisted manufacturing technology.

The Design and Development of a Regenerative Separatory Column Using Calixarenes as a Polymeric Backbone for the Purification of Water from Urine

NASA Technical Reports Server (NTRS)

Polk, M.

1999-01-01

The objective of this research project is to design calixarenes, cup-shaped molecules, with the specific binding sites to the sodium chloride and nitrogen containing components of urine, such as urea and uric acid, in urine. The following partition of the research accomplishes this objective: (1) functionalization of calixarene, (2) development of a calixarene based medium for the separatory process, (3) design of the column regeneration protocol. Work was also accomplished in the area of temperature sensitive paint (TSP). Research was undertaken to design a TSP with insulating propertites. An important part of this research project is to discover the thermal conductivity of polymers for TSP.

Optimal Experiment Design for Thermal Characterization of Functionally Graded Materials

NASA Technical Reports Server (NTRS)

Cole, Kevin D.

2003-01-01

The purpose of the project was to investigate methods to accurately verify that designed , materials meet thermal specifications. The project involved heat transfer calculations and optimization studies, and no laboratory experiments were performed. One part of the research involved study of materials in which conduction heat transfer predominates. Results include techniques to choose among several experimental designs, and protocols for determining the optimum experimental conditions for determination of thermal properties. Metal foam materials were also studied in which both conduction and radiation heat transfer are present. Results of this work include procedures to optimize the design of experiments to accurately measure both conductive and radiative thermal properties. Detailed results in the form of three journal papers have been appended to this report.

Analysis of dental students' written peer feedback from a prospective peer assessment protocol.

PubMed

Tricio, J; Woolford, M; Escudier, M

2016-11-01

Peer assessment and feedback is encouraged to enhance students' learning. The aim of this study was to quantitatively and qualitatively analyse pre-clinical and clinical dental students' written peer feedback provided as part of a continuous, formative and structured peer assessment protocol. A total of 309 Year-2 and Year-5 dental students were invited to participate in a peer assessment and peer feedback protocol. Consenting volunteer students were trained to observe each other whilst working in the skills laboratory (Year-2) and in the dental clinic (Year-5). Subsequently, they followed a structured protocol of peer assessment and peer feedback using specially designed work-based forms during a complete academic year. The content of their written feedback was coded according to the UK General Dental Council domain, sign (positive or negative), specificity (task specific or general), and grouped into themes. A total of 108 participants (40 Year-2 and 68 Year-5) completed 1169 peer assessment work-based forms (516 pre-clinical and 653 clinical); 94% contained written feedback. The large majority (82%) of Year-2 feedback represented the clinical domain, 89% were positive, 77% were task specific, and they were grouped into 14 themes. Year-5 feedback was related mostly to Management and Leadership (37%) and Communication (32%), 64% were positive, 75% task specific, and they were clustered into 24 themes. The content of the feedback showed notable differences between Year-2 and Year-5 students. Senior students focused more on Communication and Management and Leadership skills, whilst juniors were more concerned with clinical skills. Year-5 students provided 13% negative feedback compared to only 2% from Year-2. Regulatory focus theory is discussed to explain these differences. Both groups provided peer feedback on a wide and different range of themes. However, four themes emerged in both groups: efficiency, infection control, time management and working speed. A structured peer assessment framework can be used to guide pre-clinical and clinical students to provide peer feedback focused on different domains, and on contrasting signs and specificities. It can also present an opportunity to complement tutors' feedback. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Methodology capture: discriminating between the "best" and the rest of community practice

PubMed Central

Eales, James M; Pinney, John W; Stevens, Robert D; Robertson, David L

2008-01-01

Background The methodologies we use both enable and help define our research. However, as experimental complexity has increased the choice of appropriate methodologies has become an increasingly difficult task. This makes it difficult to keep track of available bioinformatics software, let alone the most suitable protocols in a specific research area. To remedy this we present an approach for capturing methodology from literature in order to identify and, thus, define best practice within a field. Results Our approach is to implement data extraction techniques on the full-text of scientific articles to obtain the set of experimental protocols used by an entire scientific discipline, molecular phylogenetics. Our methodology for identifying methodologies could in principle be applied to any scientific discipline, whether or not computer-based. We find a number of issues related to the nature of best practice, as opposed to community practice. We find that there is much heterogeneity in the use of molecular phylogenetic methods and software, some of which is related to poor specification of protocols. We also find that phylogenetic practice exhibits field-specific tendencies that have increased through time, despite the generic nature of the available software. We used the practice of highly published and widely collaborative researchers ("expert" researchers) to analyse the influence of authority on community practice. We find expert authors exhibit patterns of practice common to their field and therefore act as useful field-specific practice indicators. Conclusion We have identified a structured community of phylogenetic researchers performing analyses that are customary in their own local community and significantly different from those in other areas. Best practice information can help to bridge such subtle differences by increasing communication of protocols to a wider audience. We propose that the practice of expert authors from the field of evolutionary biology is the closest to contemporary best practice in phylogenetic experimental design. Capturing best practice is, however, a complex task and should also acknowledge the differences between fields such as the specific context of the analysis. PMID:18761740

Design and Evaluation of Complex Moving HIFU Treatment Protocols

NASA Astrophysics Data System (ADS)

Kargl, Steven G.; Andrew, Marilee A.; Kaczkowski, Peter J.; Brayman, Andrew A.; Crum, Lawrence A.

2005-03-01

The use of moving high-intensity focused ultrasound (HIFU) treatment protocols is of interest in achieving efficient formation of large-volume thermal lesions in tissue. Judicious protocol design is critical in order to avoid collateral damage to healthy tissues outside the treatment zone. A KZK-BHTE model, extended to simulate multiple, moving scans in tissue, is used to investigate protocol design considerations. Prediction and experimental observations are presented which 1) validate the model, 2) illustrate how to assess the effects of acoustic nonlinearity, and 3) demonstrate how to assess and control collateral damage such as prefocal lesion formation and lesion formation resulting from thermal conduction without direct HIFU exposure. Experimental data consist of linear and circular scan protocols delivered over a range of exposure regimes in ex vivo bovine liver.

Factors that impact on the use of mechanical ventilation weaning protocols in critically ill adults and children: a qualitative evidence-synthesis.

PubMed

Jordan, Joanne; Rose, Louise; Dainty, Katie N; Noyes, Jane; Blackwood, Bronagh

2016-10-04

Prolonged mechanical ventilation is associated with a longer intensive care unit (ICU) length of stay and higher mortality. Consequently, methods to improve ventilator weaning processes have been sought. Two recent Cochrane systematic reviews in ICU adult and paediatric populations concluded that protocols can be effective in reducing the duration of mechanical ventilation, but there was significant heterogeneity in study findings. Growing awareness of the benefits of understanding the contextual factors impacting on effectiveness has encouraged the integration of qualitative evidence syntheses with effectiveness reviews, which has delivered important insights into the reasons underpinning (differential) effectiveness of healthcare interventions. 1. To locate, appraise and synthesize qualitative evidence concerning the barriers and facilitators of the use of protocols for weaning critically-ill adults and children from mechanical ventilation;2. To integrate this synthesis with two Cochrane effectiveness reviews of protocolized weaning to help explain observed heterogeneity by identifying contextual factors that impact on the use of protocols for weaning critically-ill adults and children from mechanical ventilation;3. To use the integrated body of evidence to suggest the circumstances in which weaning protocols are most likely to be used. We used a range of search terms identified with the help of the SPICE (Setting, Perspective, Intervention, Comparison, Evaluation) mnemonic. Where available, we used appropriate methodological filters for specific databases. We searched the following databases: Ovid MEDLINE, Embase, OVID, PsycINFO, CINAHL Plus, EBSCOHost, Web of Science Core Collection, ASSIA, IBSS, Sociological Abstracts, ProQuest and LILACS on the 26th February 2015. In addition, we searched: the grey literature; the websites of professional associations for relevant publications; and the reference lists of all publications reviewed. We also contacted authors of the trials included in the effectiveness reviews as well as of studies (potentially) included in the qualitative synthesis, conducted citation searches of the publications reporting these studies, and contacted content experts.We reran the search on 3rd July 2016 and found three studies, which are awaiting classification. We included qualitative studies that described: the circumstances in which protocols are designed, implemented or used, or both, and the views and experiences of healthcare professionals either involved in the design, implementation or use of weaning protocols or involved in the weaning of critically-ill adults and children from mechanical ventilation not using protocols. We included studies that: reflected on any aspect of the use of protocols, explored contextual factors relevant to the development, implementation or use of weaning protocols, and reported contextual phenomena and outcomes identified as relevant to the effectiveness of protocolized weaning from mechanical ventilation. At each stage, two review authors undertook designated tasks, with the results shared amongst the wider team for discussion and final development. We independently reviewed all retrieved titles, abstracts and full papers for inclusion, and independently extracted selected data from included studies. We used the findings of the included studies to develop a new set of analytic themes focused on the barriers and facilitators to the use of protocols, and further refined them to produce a set of summary statements. We used the Confidence in the Evidence from Reviews of Qualitative Research (CERQual) framework to arrive at a final assessment of the overall confidence of the evidence used in the synthesis. We included all studies but undertook two sensitivity analyses to determine how the removal of certain bodies of evidence impacted on the content and confidence of the synthesis. We deployed a logic model to integrate the findings of the qualitative evidence synthesis with those of the Cochrane effectiveness reviews. We included 11 studies in our synthesis, involving 267 participants (one study did not report the number of participants). Five more studies are awaiting classification and will be dealt with when we update the review.The quality of the evidence was mixed; of the 35 summary statements, we assessed 17 as 'low', 13 as 'moderate' and five as 'high' confidence. Our synthesis produced nine analytical themes, which report potential barriers and facilitators to the use of protocols. The themes are: the need for continual staff training and development; clinical experience as this promotes felt and perceived competence and confidence to wean; the vulnerability of weaning to disparate interprofessional working; an understanding of protocols as militating against a necessary proactivity in clinical practice; perceived nursing scope of practice and professional risk; ICU structure and processes of care; the ability of protocols to act as a prompt for shared care and consistency in weaning practice; maximizing the use of protocols through visibility and ease of implementation; and the ability of protocols to act as a framework for communication with parents. There is a clear need for weaning protocols to take account of the social and cultural environment in which they are to be implemented. Irrespective of its inherent strengths, a protocol will not be used if it does not accommodate these complexities. In terms of protocol development, comprehensive interprofessional input will help to ensure broad-based understanding and a sense of 'ownership'. In terms of implementation, all relevant ICU staff will benefit from general weaning as well as protocol-specific training; not only will this help secure a relevant clinical knowledge base and operational understanding, but will also demonstrate to others that this knowledge and understanding is in place. In order to maximize relevance and acceptability, protocols should be designed with the patient profile and requirements of the target ICU in mind. Predictably, an under-resourced ICU will impact adversely on protocol implementation, as staff will prioritize management of acutely deteriorating and critically-ill patients.

Recommendations for the use of mist nets for inventory and monitoring of bird populations

USGS Publications Warehouse

Ralph, C. John; Dunn, Erica H.; Peach, Will J.; Handel, Colleen M.; Ralph, C. John; Dunn, Erica H.

2004-01-01

We provide recommendations on the best practices for mist netting for the purposes of monitoring population parameters such as abundance and demography. Studies should be carefully thought out before nets are set up, to ensure that sampling design and estimated sample size will allow study objectives to be met. Station location, number of nets, type of nets, net placement, and schedule of operation should be determined by the goals of the particular project, and we provide guidelines for typical mist-net studies. In the absence of study-specific requirements for novel protocols, commonly used protocols should be used to enable comparison of results among studies. Regardless of the equipment, net layout, or netting schedule selected, it is important for all studies that operations be strictly standardized, and a well-written operation protocol will help in attaining this goal. We provide recommendations for data to be collected on captured birds, and emphasize the need for good training of project personnel

PubMed Central

Bédard, S; Desrochers, A; Fecteau, G; Higgins, R

2001-01-01

This study was designed to evaluate 4 preoperative skin preparations, that is, more specifically, to compare the efficacy of chlorhexidine gluconate (CG) and povidone-iodine (PI), as well as 2 hair removal techniques (clipper alone or clipper followed by razor) for preoperative skin preparation in cattle. The 4 protocols resulted in a significant decrease in the number of bacterial colony-forming units (cfu). Group 4 (clipping + shaving + CG) had a significantly lower number of preoperative cfu per gel plate compared with groups 1 (clipping + PI) and 3 (clipping + shaving + PI). Skin reaction frequency was significantly higher in groups 3 and 4 (47.8% for both protocols) than in groups 1 and 2 (clipping + PI or CG) (8.7% for both). Wound infection frequency was 4.3% (4/92) and no significant difference was observed between the 4 treatment groups. The 4 protocols tested were equivalent as to efficacy and satisfactorily decreased skin microflora. Clipping alone was shown to be preferable to clipping plus shaving as a method of hair removal in cattle, with fewer skin reactions and no more wound infections. PMID:11265188

New Application of the Comet Assay

PubMed Central

Cortés-Gutiérrez, Elva I.; Dávila-Rodríguez, Martha I.; Fernández, José Luís; López-Fernández, Carmen; Gosálbez, Altea; Gosálvez, Jaime

2011-01-01

The comet assay is a well-established, simple, versatile, visual, rapid, and sensitive tool used extensively to assess DNA damage and DNA repair quantitatively and qualitatively in single cells. The comet assay is most frequently used to analyze white blood cells or lymphocytes in human biomonitoring studies, although other cell types have been examined, including buccal, nasal, epithelial, and placental cells and even spermatozoa. This study was conducted to design a protocol that can be used to generate comets in subnuclear units, such as chromosomes. The new technique is based on the chromosome isolation protocols currently used for whole chromosome mounting in electron microscopy, coupled to the alkaline variant of the comet assay, to detect DNA damage. The results show that migrant DNA fragments can be visualized in whole nuclei and isolated chromosomes and that they exhibit patterns of DNA migration that depend on the level of DNA damage produced. This protocol has great potential for the highly reproducible study of DNA damage and repair in specific chromosomal domains. PMID:21540337

Systematic Evaluation of the Patient-Reported Outcome (PRO) Content of Clinical Trial Protocols

PubMed Central

Kyte, Derek; Duffy, Helen; Fletcher, Benjamin; Gheorghe, Adrian; Mercieca-Bebber, Rebecca; King, Madeleine; Draper, Heather; Ives, Jonathan; Brundage, Michael; Blazeby, Jane; Calvert, Melanie

2014-01-01

Background Qualitative evidence suggests patient-reported outcome (PRO) information is frequently absent from clinical trial protocols, potentially leading to inconsistent PRO data collection and risking bias. Direct evidence regarding PRO trial protocol content is lacking. The aim of this study was to systematically evaluate the PRO-specific content of UK National Institute for Health Research (NIHR) Health Technology Assessment (HTA) programme trial protocols. Methods and Findings We conducted an electronic search of the NIHR HTA programme database (inception to August 2013) for protocols describing a randomised controlled trial including a primary/secondary PRO. Two investigators independently reviewed the content of each protocol, using a specially constructed PRO-specific protocol checklist, alongside the ‘Standard Protocol Items: Recommendations for Interventional Trials’ (SPIRIT) checklist. Disagreements were resolved through discussion with a third investigator. 75 trial protocols were included in the analysis. Protocols included a mean of 32/51 (63%) SPIRIT recommendations (range 16–41, SD 5.62) and 11/33 (33%) PRO-specific items (range 4–18, SD 3.56). Over half (61%) of the PRO items were incomplete. Protocols containing a primary PRO included slightly more PRO checklist items (mean 14/33 (43%)). PRO protocol content was not associated with general protocol completeness; thus, protocols judged as relatively ‘complete’ using SPIRIT were still likely to have omitted a large proportion of PRO checklist items. Conclusions The PRO components of HTA clinical trial protocols require improvement. Information on the PRO rationale/hypothesis, data collection methods, training and management was often absent. This low compliance is unsurprising; evidence shows existing PRO guidance for protocol developers remains difficult to access and lacks consistency. Study findings suggest there are a number of PRO protocol checklist items that are not fully addressed by the current SPIRIT statement. We therefore advocate the development of consensus-based supplementary guidelines, aimed at improving the completeness and quality of PRO content in clinical trial protocols. PMID:25333349

Rosetta comparative modeling for library design: Engineering alternative inducer specificity in a transcription factor.

PubMed

Jha, Ramesh K; Chakraborti, Subhendu; Kern, Theresa L; Fox, David T; Strauss, Charlie E M

2015-07-01

Structure-based rational mutagenesis for engineering protein functionality has been limited by the scarcity and difficulty of obtaining crystal structures of desired proteins. On the other hand, when high-throughput selection is possible, directed evolution-based approaches for gaining protein functionalities have been random and fortuitous with limited rationalization. We combine comparative modeling of dimer structures, ab initio loop reconstruction, and ligand docking to select positions for mutagenesis to create a library focused on the ligand-contacting residues. The rationally reduced library requirement enabled conservative control of the substitutions by oligonucleotide synthesis and bounding its size within practical transformation efficiencies (∼ 10(7) variants). This rational approach was successfully applied on an inducer-binding domain of an Acinetobacter transcription factor (TF), pobR, which shows high specificity for natural effector molecule, 4-hydroxy benzoate (4HB), but no native response to 3,4-dihydroxy benzoate (34DHB). Selection for mutants with high transcriptional induction by 34DHB was carried out at the single-cell level under flow cytometry (via green fluorescent protein expression under the control of pobR promoter). Critically, this selection protocol allows both selection for induction and rejection of constitutively active mutants. In addition to gain-of-function for 34DHB induction, the selected mutants also showed enhanced sensitivity and response for 4HB (native inducer) while no sensitivity was observed for a non-targeted but chemically similar molecule, 2-hydroxy benzoate (2HB). This is unique application of the Rosetta modeling protocols for library design to engineer a TF. Our approach extends applicability of the Rosetta redesign protocol into regimes without a priori precision structural information. © 2015 Wiley Periodicals, Inc.

Special Plans and Operations: Assessment of Allegations Concerning Traumatic Brain Injury Research Integrity in Iraq

DTIC Science & Technology

2011-03-31

protocols conducted in Iraq. His office had been designated by the 1 A research protocol is a formal document detailing the study methodology and the...Human Research Protections Program plan requires scientific peer review to ensure that research is scientifically sound in its design and methods, and...ofthe approved research protocol and IRB minutes, revealed that there was no mention of "active rehabilitation and exercise" under the design

The Xpress Transfer Protocol (XTP): A tutorial (expanded version)

NASA Technical Reports Server (NTRS)

Sanders, Robert M.; Weaver, Alfred C.

1990-01-01

The Xpress Transfer Protocol (XTP) is a reliable, real-time, light weight transfer layer protocol. Current transport layer protocols such as DoD's Transmission Control Protocol (TCP) and ISO's Transport Protocol (TP) were not designed for the next generation of high speed, interconnected reliable networks such as fiber distributed data interface (FDDI) and the gigabit/second wide area networks. Unlike all previous transport layer protocols, XTP is being designed to be implemented in hardware as a VLSI chip set. By streamlining the protocol, combining the transport and network layers and utilizing the increased speed and parallelization possible with a VLSI implementation, XTP will be able to provide the end-to-end data transmission rates demanded in high speed networks without compromising reliability and functionality. This paper describes the operation of the XTP protocol and in particular, its error, flow and rate control; inter-networking addressing mechanisms; and multicast support features, as defined in the XTP Protocol Definition Revision 3.4.

Alloreactive Regulatory T Cells Allow the Generation of Mixed Chimerism and Transplant Tolerance.

PubMed

Ruiz, Paulina; Maldonado, Paula; Hidalgo, Yessia; Sauma, Daniela; Rosemblatt, Mario; Bono, Maria Rosa

2015-01-01

The induction of donor-specific transplant tolerance is one of the main goals of modern immunology. Establishment of a mixed chimerism state in the transplant recipient has proven to be a suitable strategy for the induction of long-term allograft tolerance; however, current experimental recipient preconditioning protocols have many side effects, and are not feasible for use in future therapies. In order to improve the current mixed chimerism induction protocols, we developed a non-myeloablative bone-marrow transplant (NM-BMT) protocol using retinoic acid (RA)-induced alloantigen-specific Tregs, clinically available immunosuppressive drugs, and lower doses of irradiation. We demonstrate that RA-induced alloantigen-specific Tregs in addition to a NM-BMT protocol generates stable mixed chimerism and induces tolerance to allogeneic secondary skin allografts in mice. Therefore, the establishment of mixed chimerism through the use of donor-specific Tregs rather than non-specific immunosuppression could have a potential use in organ transplantation.

Hindering the illegal trade in dog and cat furs through a DNA-based protocol for species identification.

PubMed

Garofalo, Luisa; Mariacher, Alessia; Fanelli, Rita; Fico, Rosario; Lorenzini, Rita

2018-01-01

In Western countries dogs and cats are the most popular pets, and people are increasingly opposed to their rearing for the fur industry. In 2007, a Regulation of the European Union (EU) banned the use and trade of dog and cat furs, but an official analytical protocol to identify them as source species was not provided, and violations of law are still frequent in all Member States. In this paper we report on the development and validation of a simple and affordable DNA method for species detection in furs to use as an effective tool to combat illegal trade in fur products. A set of mitochondrial primers was designed for amplification of partial cytochrome b, control region and ND1 gene in highly degraded samples, like furs and pelts. Our amplification workflow involved the use of a non-specific primer pair to perform a first test to identify the species through sequencing, then the application of species-specific primer pairs to use in singleplex end-point PCRs as confirmation tests. The advantage of this two-step procedure is twofold: on the one hand it minimises the possibility of negative test results from degraded samples, since failure of amplification with a first set of primers can be offset by successful amplification of the second, and on the other it adds confidence and reliability to final authentication of species. All designed primers were validated on a reference collection of tissue samples, obtaining solid results in terms of specificity, sensitivity, repeatability and reproducibility. Application of the protocol on real caseworks from seized furs yielded successful results also from old and dyed furs, suggesting that age and chemical staining do not necessarily affect positive amplifications. Major pros of this approach are: (1) sensitive and informative primer sets for detection of species; (2) short PCR amplicons for the analysis of poor quality DNA; (3) binding primers that avoid contamination from human DNA; (4) user-friendly protocol for any laboratory equipped for analysis of low-copy-number DNA. Our molecular procedure proved to be a good starting point for enforcing the EU Regulation against dog and cat fur trade in forensic contexts where source attribution is essential to the assignment of responsibilities.

A Protocol for Evaluating Contextual Design Principles

PubMed Central

Stamps, Arthur

2014-01-01

This paper explains how scientific data can be incorporated into urban design decisions, such as evaluating contextual design principles. The recommended protocols are based on the Cochrane Reviews that have been widely used in medical research. The major concepts of a Cochrane Review are explained, as well as the underlying mathematics. The underlying math is meta-analysis. Data are reported for three applications and seven contextual design policies. It is suggested that use of the Cochrane protocols will be of great assistance to planners by providing scientific data that can be used to evaluate the efficacies of contextual design policies prior to implementing those policies. PMID:25431448

A low power medium access control protocol for wireless medical sensor networks.

PubMed

Lamprinos, I; Prentza, A; Sakka, E; Koutsouris, D

2004-01-01

The concept of a wireless integrated network of sensors, already applied in several sectors of our everyday life, such as security, transportation and environment monitoring, can as well provide an advanced monitor and control resource for healthcare services. By networking medical sensors wirelessly, attaching them in patient's body, we create the appropriate infrastructure for continuous and real-time monitoring of patient without discomforting him. This infrastructure can improve healthcare by providing the means for flexible acquisition of vital signs, while at the same time it provides more convenience to the patient. Given the type of wireless network, traditional medium access control (MAC) protocols cannot take advantage of the application specific requirements and information characteristics occurring in medical sensor networks, such as the demand for low power consumption and the rather limited and asymmetric data traffic. In this paper, we present the architecture of a low power MAC protocol, designated to support wireless networks of medical sensors. This protocol aims to improve energy efficiency by exploiting the inherent application features and requirements. It is oriented towards the avoidance of main energy wastage sources, such as idle listening, collision and power outspending.

Digital gene expression analysis with sample multiplexing and PCR duplicate detection: A straightforward protocol.

PubMed

Rozenberg, Andrey; Leese, Florian; Weiss, Linda C; Tollrian, Ralph

2016-01-01

Tag-Seq is a high-throughput approach used for discovering SNPs and characterizing gene expression. In comparison to RNA-Seq, Tag-Seq eases data processing and allows detection of rare mRNA species using only one tag per transcript molecule. However, reduced library complexity raises the issue of PCR duplicates, which distort gene expression levels. Here we present a novel Tag-Seq protocol that uses the least biased methods for RNA library preparation combined with a novel approach for joint PCR template and sample labeling. In our protocol, input RNA is fragmented by hydrolysis, and poly(A)-bearing RNAs are selected and directly ligated to mixed DNA-RNA P5 adapters. The P5 adapters contain i5 barcodes composed of sample-specific (moderately) degenerate base regions (mDBRs), which later allow detection of PCR duplicates. The P7 adapter is attached via reverse transcription with individual i7 barcodes added during the amplification step. The resulting libraries can be sequenced on an Illumina sequencer. After sample demultiplexing and PCR duplicate removal with a free software tool we designed, the data are ready for downstream analysis. Our protocol was tested on RNA samples from predator-induced and control Daphnia microcrustaceans.

Infusing CD19-directed T cells to augment disease control in patients undergoing autologous hematopoietic stem-cell transplantation for advanced B-lymphoid malignancies.

PubMed

Kebriaei, Partow; Huls, Helen; Jena, Bipulendu; Munsell, Mark; Jackson, Rineka; Lee, Dean A; Hackett, Perry B; Rondon, Gabriela; Shpall, Elizabeth; Champlin, Richard E; Cooper, Laurence J N

2012-05-01

Limited curative treatment options exist for patients with advanced B-lymphoid malignancies, and new therapeutic approaches are needed to augment the efficacy of hematopoietic stem-cell transplantation (HSCT). Cellular therapies, such as adoptive transfer of T cells that are being evaluated to target malignant disease, use mechanisms independent of chemo- and radiotherapy with nonoverlapping toxicities. Gene therapy is employed to generate tumor-specific T cells, as specificity can be redirected through enforced expression of a chimeric antigen receptor (CAR) to achieve antigen recognition based on the specificity of a monoclonal antibody. By combining cell and gene therapies, we have opened a new Phase I protocol at the MD Anderson Cancer Center (Houston, TX) to examine the safety and feasibility of administering autologous genetically modified T cells expressing a CD19-specific CAR (capable of signaling through chimeric CD28 and CD3-ζ) into patients with high-risk B-lymphoid malignancies undergoing autologous HSCT. The T cells are genetically modified by nonviral gene transfer of the Sleeping Beauty system and CAR(+) T cells selectively propagated in a CAR-dependent manner on designer artificial antigen-presenting cells. The results of this study will lay the foundation for future protocols including CAR(+) T-cell infusions derived from allogeneic sources.

Study protocol and overview of the literature on long-term health and quality of life outcomes in patients treated in adolescence for scoliosis with therapeutic exercises.

PubMed

Plaszewski, Maciej; Kotwicki, Tomasz; Chwala, Wieslaw; Terech, Jacek; Cieśliński, Igor

2015-01-01

Scoliosis, the most prevalent orthopaedic condition affecting children and adolescents, may have lasting physical, psychological and social consequences. With limited evidence-base, scoliosis-specific exercise therapies are an option. An overview of the subject and description of a long-term follow-up study including adults who in adolescence were treated with a scoliosis-specific exercise programme investigating the association of the exercise regime with present physical activity, physical functioning and subjective wellbeing. To the authors' best knowledge, this is the first long-term outcome study on scoliosis-specific exercises, in opposition to a number of studies in adults who were braced or treated surgically in adolescence. Observational, registry-based case-control study. Adult subjects who in adolescence were treated with an exercise programme or were under observation are invited. Spine and trunk deformity, respiratory function, physical capacity and trunk muscles' function are measured. Health-related quality of life with generic and condition-specific instruments, general mental health, depression and anxiety symptoms, disability due to low back problems and physical activity are assessed. The report is believed to provide the readers with an overview of this controversial aspect of rehabilitation, and that the proposed protocol will assist researchers designing their studies.

PNA-COMBO-FISH: From combinatorial probe design in silico to vitality compatible, specific labelling of gene targets in cell nuclei.

PubMed

Müller, Patrick; Rößler, Jens; Schwarz-Finsterle, Jutta; Schmitt, Eberhard; Hausmann, Michael

2016-07-01

Recently, advantages concerning targeting specificity of PCR constructed oligonucleotide FISH probes in contrast to established FISH probes, e.g. BAC clones, have been demonstrated. These techniques, however, are still using labelling protocols with DNA denaturing steps applying harsh heat treatment with or without further denaturing chemical agents. COMBO-FISH (COMBinatorial Oligonucleotide FISH) allows the design of specific oligonucleotide probe combinations in silico. Thus, being independent from primer libraries or PCR laboratory conditions, the probe sequences extracted by computer sequence data base search can also be synthesized as single stranded PNA-probes (Peptide Nucleic Acid probes) or TINA-DNA (Twisted Intercalating Nucleic Acids). Gene targets can be specifically labelled with at least about 20 probes obtaining visibly background free specimens. By using appropriately designed triplex forming oligonucleotides, the denaturing procedures can completely be omitted. These results reveal a significant step towards oligonucleotide-FISH maintaining the 3d-nanostructure and even the viability of the cell target. The method is demonstrated with the detection of Her2/neu and GRB7 genes, which are indicators in breast cancer diagnosis and therapy. Copyright © 2016. Published by Elsevier Inc.

Real-Time QoS Routing Protocols in Wireless Multimedia Sensor Networks: Study and Analysis.

PubMed

Alanazi, Adwan; Elleithy, Khaled

2015-09-02

Many routing protocols have been proposed for wireless sensor networks. These routing protocols are almost always based on energy efficiency. However, recent advances in complementary metal-oxide semiconductor (CMOS) cameras and small microphones have led to the development of Wireless Multimedia Sensor Networks (WMSN) as a class of wireless sensor networks which pose additional challenges. The transmission of imaging and video data needs routing protocols with both energy efficiency and Quality of Service (QoS) characteristics in order to guarantee the efficient use of the sensor nodes and effective access to the collected data. Also, with integration of real time applications in Wireless Senor Networks (WSNs), the use of QoS routing protocols is not only becoming a significant topic, but is also gaining the attention of researchers. In designing an efficient QoS routing protocol, the reliability and guarantee of end-to-end delay are critical events while conserving energy. Thus, considerable research has been focused on designing energy efficient and robust QoS routing protocols. In this paper, we present a state of the art research work based on real-time QoS routing protocols for WMSNs that have already been proposed. This paper categorizes the real-time QoS routing protocols into probabilistic and deterministic protocols. In addition, both categories are classified into soft and hard real time protocols by highlighting the QoS issues including the limitations and features of each protocol. Furthermore, we have compared the performance of mobility-aware query based real-time QoS routing protocols from each category using Network Simulator-2 (NS2). This paper also focuses on the design challenges and future research directions as well as highlights the characteristics of each QoS routing protocol.

Real-Time QoS Routing Protocols in Wireless Multimedia Sensor Networks: Study and Analysis

PubMed Central

Alanazi, Adwan; Elleithy, Khaled

2015-01-01

Many routing protocols have been proposed for wireless sensor networks. These routing protocols are almost always based on energy efficiency. However, recent advances in complementary metal-oxide semiconductor (CMOS) cameras and small microphones have led to the development of Wireless Multimedia Sensor Networks (WMSN) as a class of wireless sensor networks which pose additional challenges. The transmission of imaging and video data needs routing protocols with both energy efficiency and Quality of Service (QoS) characteristics in order to guarantee the efficient use of the sensor nodes and effective access to the collected data. Also, with integration of real time applications in Wireless Senor Networks (WSNs), the use of QoS routing protocols is not only becoming a significant topic, but is also gaining the attention of researchers. In designing an efficient QoS routing protocol, the reliability and guarantee of end-to-end delay are critical events while conserving energy. Thus, considerable research has been focused on designing energy efficient and robust QoS routing protocols. In this paper, we present a state of the art research work based on real-time QoS routing protocols for WMSNs that have already been proposed. This paper categorizes the real-time QoS routing protocols into probabilistic and deterministic protocols. In addition, both categories are classified into soft and hard real time protocols by highlighting the QoS issues including the limitations and features of each protocol. Furthermore, we have compared the performance of mobility-aware query based real-time QoS routing protocols from each category using Network Simulator-2 (NS2). This paper also focuses on the design challenges and future research directions as well as highlights the characteristics of each QoS routing protocol. PMID:26364639

A Natural Language Processing-based Model to Automate MRI Brain Protocol Selection and Prioritization.

PubMed

Brown, Andrew D; Marotta, Thomas R

2017-02-01

Incorrect imaging protocol selection can contribute to increased healthcare cost and waste. To help healthcare providers improve the quality and safety of medical imaging services, we developed and evaluated three natural language processing (NLP) models to determine whether NLP techniques could be employed to aid in clinical decision support for protocoling and prioritization of magnetic resonance imaging (MRI) brain examinations. To test the feasibility of using an NLP model to support clinical decision making for MRI brain examinations, we designed three different medical imaging prediction tasks, each with a unique outcome: selecting an examination protocol, evaluating the need for contrast administration, and determining priority. We created three models for each prediction task, each using a different classification algorithm-random forest, support vector machine, or k-nearest neighbor-to predict outcomes based on the narrative clinical indications and demographic data associated with 13,982 MRI brain examinations performed from January 1, 2013 to June 30, 2015. Test datasets were used to calculate the accuracy, sensitivity and specificity, predictive values, and the area under the curve. Our optimal results show an accuracy of 82.9%, 83.0%, and 88.2% for the protocol selection, contrast administration, and prioritization tasks, respectively, demonstrating that predictive algorithms can be used to aid in clinical decision support for examination protocoling. NLP models developed from the narrative clinical information provided by referring clinicians and demographic data are feasible methods to predict the protocol and priority of MRI brain examinations. Copyright © 2017 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

College of American Pathologists Cancer Protocols: Optimizing Format for Accuracy and Efficiency.

PubMed

Strickland-Marmol, Leah B; Muro-Cacho, Carlos A; Barnett, Scott D; Banas, Matthew R; Foulis, Philip R

2016-06-01

-The data in College of American Pathologists cancer protocols have to be presented effectively to health care providers. There is no consensus on the format of those protocols, resulting in various designs among pathologists. Cancer protocols are independently created by site-specific experts, so there is inconsistent wording and repetition of data. This lack of standardization can be confusing and may lead to interpretation errors. -To define a synopsis format that is effective in delivering essential pathologic information and to evaluate the aesthetic appeal and the impact of varying format styles on the speed and accuracy of data extraction. -We queried individuals from several health care backgrounds using varying formats of the fallopian tube protocol of the College of American Pathologists without content modification to investigate their aesthetic appeal, accuracy, efficiency, and readability/complexity. Descriptive statistics, an item difficulty index, and 3 tests of readability were used. -Columned formats were aesthetically more appealing than justified formats (P < .001) and were associated with greater accuracy and efficiency. Incorrect assumptions were made about items not included in the protocol. Uniform wording and short sentences were associated with better performance by participants. -Based on these data, we propose standardized protocol formats for cancer resections of the fallopian tube and the more-familiar colon, employing headers, short phrases, and uniform terminology. This template can be easily and minimally modified for other sites, standardizing format and verbiage and increasing user accuracy and efficiency. Principles of human factors engineering should be considered in the display of patient data.

Association between post-game recovery protocols, physical and perceived recovery, and performance in elite Australian Football League players.

PubMed

Bahnert, Andrew; Norton, Kevin; Lock, Phillip

2013-03-01

To determine the associations between post-game recovery protocols and physical and perceptual recovery, and game performance in Australian Football League players. A longitudinal quasi-experimental study design was used across a season. A full squad of 44 footballers was monitored weekly across a 23-game season. Players were required to choose from a number of recovery modalities available immediately post-game. These included floor stretching, pool stretching, bike active recovery, pool active recovery, cold-water immersion, contrast therapy and use of a compression garment. Perceptual measures of recovery were recorded throughout the week and a test of physical performance was conducted two days post-game. Game performance ratings were also recorded. The associations between the post-game recovery protocols chosen and players' perceived recovery, and physical and game performances were determined by the association rule data-mining strategy. Statistically significant associations were found between a number of post-game recovery protocols and perceptual recovery. In general, players who chose cold-water immersion, floor stretching, no active recovery (neither bike or pool) and the use of a compression garment post-game, had an increased probability of reporting greater perceptual recovery across the following week, relative to all other permutations of recovery protocols chosen. There were no associations found between post-game recovery protocol combinations and physical recovery. No associations were found between the post-game recovery methods and the next game performance. Perceptual recovery among players was enhanced through the selection of specific combinations of recovery protocols post game. However, no links were found between recovery protocols and physical or game performance measures. Copyright © 2012 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Complementary and Alternative Medicine Use Among US Navy and Marine Corps Personnel

DTIC Science & Technology

2007-05-16

protection of human subjects in research (Protocol NHRC.2001.0001). Postal survey The choice of questions and question layouts for the sur- vey instrument were...specific health problems within the past 12 months. The optically scanned 10-page survey instrument was designed to take approximately 30 minutes to...suggestions, the survey instrument was refined before the initial mailing. Additionally, a random sample of 33% of individuals who completed the

Primary Airway Epithelial Cell Gene Editing Using CRISPR-Cas9.

PubMed

Everman, Jamie L; Rios, Cydney; Seibold, Max A

2018-01-01

The adaptation of the clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR associated endonuclease 9 (CRISPR-Cas9) machinery from prokaryotic organisms has resulted in a gene editing system that is highly versatile, easily constructed, and can be leveraged to generate human cells knocked out (KO) for a specific gene. While standard transfection techniques can be used for the introduction of CRISPR-Cas9 expression cassettes to many cell types, delivery by this method is not efficient in many primary cell types, including primary human airway epithelial cells (AECs). More efficient delivery in AECs can be achieved through lentiviral-mediated transduction, allowing the CRISPR-Cas9 system to be integrated into the genome of the cell, resulting in stable expression of the nuclease machinery and increasing editing rates. In parallel, advancements have been made in the culture, expansion, selection, and differentiation of AECs, which allow the robust generation of a bulk edited AEC population from transduced cells. Applying these methods, we detail here our latest protocol to generate mucociliary epithelial cultures knocked out for a specific gene from donor-isolated primary human basal airway epithelial cells. This protocol includes methods to: (1) design and generate lentivirus which targets a specific gene for KO with CRISPR-Cas9 machinery, (2) efficiently transduce AECs, (3) culture and select for a bulk edited AEC population, (4) molecularly screen AECs for Cas9 cutting and specific sequence edits, and (5) further expand and differentiate edited cells to a mucociliary airway epithelial culture. The AEC knockouts generated using this protocol provide an excellent primary cell model system with which to characterize the function of genes involved in airway dysfunction and disease.

Practical protocols for fast histopathology by Fourier transform infrared spectroscopic imaging

NASA Astrophysics Data System (ADS)

Keith, Frances N.; Reddy, Rohith K.; Bhargava, Rohit

2008-02-01

Fourier transform infrared (FT-IR) spectroscopic imaging is an emerging technique that combines the molecular selectivity of spectroscopy with the spatial specificity of optical microscopy. We demonstrate a new concept in obtaining high fidelity data using commercial array detectors coupled to a microscope and Michelson interferometer. Next, we apply the developed technique to rapidly provide automated histopathologic information for breast cancer. Traditionally, disease diagnoses are based on optical examinations of stained tissue and involve a skilled recognition of morphological patterns of specific cell types (histopathology). Consequently, histopathologic determinations are a time consuming, subjective process with innate intra- and inter-operator variability. Utilizing endogenous molecular contrast inherent in vibrational spectra, specially designed tissue microarrays and pattern recognition of specific biochemical features, we report an integrated algorithm for automated classifications. The developed protocol is objective, statistically significant and, being compatible with current tissue processing procedures, holds potential for routine clinical diagnoses. We first demonstrate that the classification of tissue type (histology) can be accomplished in a manner that is robust and rigorous. Since data quality and classifier performance are linked, we quantify the relationship through our analysis model. Last, we demonstrate the application of the minimum noise fraction (MNF) transform to improve tissue segmentation.

An augmented cognitive behavioural therapy for treating post-stroke depression: description of a treatment protocol.

PubMed

Kootker, Joyce A; Rasquin, Sascha M C; Smits, Peter; Geurts, Alexander C; van Heugten, Caroline M; Fasotti, Luciano

2015-09-01

Currently, no evidence-based treatment is available for mood problems after stroke. We present a new psychological intervention designed to reduce depressive complaints after stroke. This intervention was based on cognitive behavioural therapy principles and was shown feasible in a pilot study. In order to meet the specific needs of stroke patients (concerning both sensori-motor, cognitive, and behavioural problems), we incorporated motivational interviewing, grief resolution, and psycho-education. We emphasised for each session to take into account the cognitive deficits of the patients (i.e. be concrete, accessible, structured, specific, and repeat information). Moreover, we augmented the psychologist-administered therapy with the contribution of an occupational or movement therapist aimed at facilitating patients' goal-setting and attainment. The intervention consisted of 12 one-hour sessions with a psychologist and three or four one-hour sessions with an occupational or movement therapist. Currently, the effectiveness of the intervention is evaluated in a randomised controlled trial. The proposed psychological treatment protocol is innovative, as it applies cognitive behavioural therapy in a stroke-specific manner; moreover, it supports goal attainment by incorporating occupational or movement therapy sessions. © The Author(s) 2014.

Device USB interface and software development for electric parameter measuring instrument

NASA Astrophysics Data System (ADS)

Li, Deshi; Chen, Jian; Wu, Yadong

2003-09-01

Aimed at general devices development, this paper discussed the development of USB interface and software development. With an example, using PDIUSBD12 which support parallel interface, the paper analyzed its technical characteristics. Designed different interface circuit with 80C52 singlechip microcomputer and TMS320C54 series digital signal processor, analyzed the address allocation, register access. According to USB1.1 standard protocol, designed the device software and application layer protocol. The paper designed the data exchange protocol, and carried out system functions.

On-Orbit Evaluation of a New Treadmill Harness for Improved Crewmember Comfort and Load Distribution

NASA Technical Reports Server (NTRS)

Perusek, G. P.; Sheehan, C. C.; Savina, M. C.; Owings, T. M.; Davis, B. L.; Ryder, J. W.

2011-01-01

The current design of the International Space Station (ISS) Treadmill Harness has been reported to cause pain and discomfort to crewmembers during exercise. The Harness Station Development Test Objective (SDTO) provided participating crewmembers (n = 6) with a new harness design, the "Glenn Harness," to evaluate for comfort and loading as compared to the current Treadmill Harness. A novel suite of load-sensing instrumentation was developed to noninvasively measure load distribution and provided a first-ever quantification of actual dynamic loads during treadmill exercise. In addition, crew debriefs provided feedback on harness preference and overall impressions. Conclusions: Post-flight analysis in returned Glenn Harnesses (n = 3) showed minimal wear and tear. Four of the six subjects found the Glenn Harness to be more comfortable in this on-orbit, side-by-side comparison as measured by the crew comfort questionnaire and crew debriefs. Specific areas for improvement have been identified, and forward recommendations will be provided to the Human Research Program. The protocol developed for the SDTO provided valuable insight into crew comfort issues, design improvements, and loading preferences for exercise harnessing, which lays the groundwork for better harnessing systems and training protocols.

Predicting the behavior of microfluidic circuits made from discrete elements

PubMed Central

Bhargava, Krisna C.; Thompson, Bryant; Iqbal, Danish; Malmstadt, Noah

2015-01-01

Microfluidic devices can be used to execute a variety of continuous flow analytical and synthetic chemistry protocols with a great degree of precision. The growing availability of additive manufacturing has enabled the design of microfluidic devices with new functionality and complexity. However, these devices are prone to larger manufacturing variation than is typical of those made with micromachining or soft lithography. In this report, we demonstrate a design-for-manufacturing workflow that addresses performance variation at the microfluidic element and circuit level, in context of mass-manufacturing and additive manufacturing. Our approach relies on discrete microfluidic elements that are characterized by their terminal hydraulic resistance and associated tolerance. Network analysis is employed to construct simple analytical design rules for model microfluidic circuits. Monte Carlo analysis is employed at both the individual element and circuit level to establish expected performance metrics for several specific circuit configurations. A protocol based on osmometry is used to experimentally probe mixing behavior in circuits in order to validate these approaches. The overall workflow is applied to two application circuits with immediate use at on the bench-top: series and parallel mixing circuits that are modularly programmable, virtually predictable, highly precise, and operable by hand. PMID:26516059

Zero-Copy Objects System

NASA Technical Reports Server (NTRS)

Burleigh, Scott C.

2011-01-01

Zero-Copy Objects System software enables application data to be encapsulated in layers of communication protocol without being copied. Indirect referencing enables application source data, either in memory or in a file, to be encapsulated in place within an unlimited number of protocol headers and/or trailers. Zero-copy objects (ZCOs) are abstract data access representations designed to minimize I/O (input/output) in the encapsulation of application source data within one or more layers of communication protocol structure. They are constructed within the heap space of a Simple Data Recorder (SDR) data store to which all participating layers of the stack must have access. Each ZCO contains general information enabling access to the core source data object (an item of application data), together with (a) a linked list of zero or more specific extents that reference portions of this source data object, and (b) linked lists of protocol header and trailer capsules. The concatenation of the headers (in ascending stack sequence), the source data object extents, and the trailers (in descending stack sequence) constitute the transmitted data object constructed from the ZCO. This scheme enables a source data object to be encapsulated in a succession of protocol layers without ever having to be copied from a buffer at one layer of the protocol stack to an encapsulating buffer at a lower layer of the stack. For large source data objects, the savings in copy time and reduction in memory consumption may be considerable.

Protocol for determining bull trout presence

USGS Publications Warehouse

Peterson, James; Dunham, Jason B.; Howell, Philip; Thurow, Russell; Bonar, Scott

2002-01-01

The Western Division of the American Fisheries Society was requested to develop protocols for determining presence/absence and potential habitat suitability for bull trout. The general approach adopted is similar to the process for the marbled murrelet, whereby interim guidelines are initially used, and the protocols are subsequently refined as data are collected. Current data were considered inadequate to precisely identify suitable habitat but could be useful in stratifying sampling units for presence/absence surveys. The presence/absence protocol builds on previous approaches (Hillman and Platts 1993; Bonar et al. 1997), except it uses the variation in observed bull trout densities instead of a minimum threshold density and adjusts for measured differences in sampling efficiency due to gear types and habitat characteristics. The protocol consists of: 1. recommended sample sizes with 80% and 95% detection probabilities for juvenile and resident adult bull trout for day and night snorkeling and electrofishing adjusted for varying habitat characteristics for 50m and 100m sampling units, 2. sampling design considerations, including possible habitat characteristics for stratification, 3. habitat variables to be measured in the sampling units, and 3. guidelines for training sampling crews. Criteria for habitat strata consist of coarse, watershed-scale characteristics (e.g., mean annual air temperature) and fine-scale, reach and habitat-specific features (e.g., water temperature, channel width). The protocols will be revised in the future using data from ongoing presence/absence surveys, additional research on sampling efficiencies, and development of models of habitat/species occurrence.

Dynamic Spectrum Management for Military Wireless Networks

DTIC Science & Technology

2010-09-01

auctions, and protocols and etiquettes . Command and control assignments are provided by the regulatory agency by reviewing specific licensing...devices and amateur licensees do not have specific frequency assignments. The Protocols and Etiquettes methods allow these devices to operate within a...with Collision Avoidance (CSMA/CA) a protocol . Etiquettes are rules that are followed without explicit interaction between devices. Simple etiquettes

Computational design of protein antigens that interact with the CDR H3 loop of HIV broadly neutralizing antibody 2F5

PubMed Central

Azoitei, M.L.; Ban, Y.A.; Kalyuzhny, O.; Guenaga, J.; Schroeter, A.; Porter, J.; Wyatt, R.; Schief, W.R.

2015-01-01

Rational design of proteins with novel binding specificities and increased affinity is one of the major goals of computational protein design. Epitope-scaffolds are a new class of antigens engineered by transplanting viral epitopes of pre-defined structure to protein scaffolds, or by building protein scaffolds around such epitopes. Epitope-scaffolds are of interest as vaccine components to attempt to elicit neutralizing antibodies targeting the specified epitope. In this study we developed a new computational protocol, MultiGraft Interface, that transplants epitopes but also designs additional scaffold features outside the epitope to enhance antibody-binding specificity and potentially influence the specificity of elicited antibodies. We employed MultiGraft Interface to engineer novel epitope-scaffolds that display the known epitope of HIV-1 neutralizing antibody 2F5 and that also interact with the functionally important CDR H3 antibody loop. MultiGraft Interface generated an epitope-scaffold that bound 2F5 with sub-nanomolar affinity (KD = 400 pM) and that interacted with the antibody CDR H3 loop through computationally designed contacts. Substantial structural modifications were necessary to engineer this antigen, with the 2F5 epitope replacing a helix in the native scaffold and with 15% of the native scaffold sequence being modified in the design stage. This epitope-scaffold represents a successful example of rational protein backbone engineering and protein-protein interface design and could prove useful in the field of HIV vaccine design. MultiGraft Interface can be generally applied to engineer novel binding partners with altered specificity and optimized affinity. PMID:25043744

Fibre-Specific Responses to Endurance and Low Volume High Intensity Interval Training: Striking Similarities in Acute and Chronic Adaptation

PubMed Central

Scribbans, Trisha D.; Edgett, Brittany A.; Vorobej, Kira; Mitchell, Andrew S.; Joanisse, Sophie D.; Matusiak, Jennifer B. L.; Parise, Gianni; Quadrilatero, Joe; Gurd, Brendon J.

2014-01-01

The current study involved the completion of two distinct experiments. Experiment 1 compared fibre specific and whole muscle responses to acute bouts of either low-volume high-intensity interval training (LV-HIT) or moderate-intensity continuous endurance exercise (END) in a randomized crossover design. Experiment 2 examined the impact of a six-week training intervention (END or LV-HIT; 4 days/week), on whole body and skeletal muscle fibre specific markers of aerobic and anaerobic capacity. Six recreationally active men (Age: 20.7±3.8 yrs; VO2peak: 51.9±5.1 mL/kg/min) reported to the lab on two separate occasions for experiment 1. Following a muscle biopsy taken in a fasted state, participants completed an acute bout of each exercise protocol (LV-HIT: 8, 20-second intervals at ∼170% of VO2peak separated by 10 seconds of rest; END: 30 minutes at ∼65% of VO2peak), immediately followed by a muscle biopsy. Glycogen content of type I and IIA fibres was significantly (p<0.05) reduced, while p-ACC was significantly increased (p<0.05) following both protocols. Nineteen recreationally active males (n = 16) and females (n = 3) were VO2peak-matched and assigned to either the LV-HIT (n = 10; 21±2 yrs) or END (n = 9; 20.7±3.8 yrs) group for experiment 2. After 6 weeks, both training protocols induced comparable increases in aerobic capacity (END: Pre: 48.3±6.0, Mid: 51.8±6.0, Post: 55.0±6.3 mL/kg/min LV-HIT: Pre: 47.9±8.1, Mid: 50.4±7.4, Post: 54.7±7.6 mL/kg/min), fibre-type specific oxidative and glycolytic capacity, glycogen and IMTG stores, and whole-muscle capillary density. Interestingly, only LV-HIT induced greater improvements in anaerobic performance and estimated whole-muscle glycolytic capacity. These results suggest that 30 minutes of END exercise at ∼65% VO2peak or 4 minutes of LV-HIT at ∼170% VO2peak induce comparable changes in the intra-myocellular environment (glycogen content and signaling activation); correspondingly, training-induced adaptations resulting for these protocols, and other HIT and END protocols are strikingly similar. PMID:24901767

Design and Development of Layered Security: Future Enhancements and Directions in Transmission

PubMed Central

Shahzad, Aamir; Lee, Malrey; Kim, Suntae; Kim, Kangmin; Choi, Jae-Young; Cho, Younghwa; Lee, Keun-Kwang

2016-01-01

Today, security is a prominent issue when any type of communication is being undertaken. Like traditional networks, supervisory control and data acquisition (SCADA) systems suffer from a number of vulnerabilities. Numerous end-to-end security mechanisms have been proposed for the resolution of SCADA-system security issues, but due to insecure real-time protocol use and the reliance upon open protocols during Internet-based communication, these SCADA systems can still be compromised by security challenges. This study reviews the security challenges and issues that are commonly raised during SCADA/protocol transmissions and proposes a secure distributed-network protocol version 3 (DNP3) design, and the implementation of the security solution using a cryptography mechanism. Due to the insecurities found within SCADA protocols, the new development consists of a DNP3 protocol that has been designed as a part of the SCADA system, and the cryptographically derived security is deployed within the application layer as a part of the DNP3 stack. PMID:26751443

Design and Development of Layered Security: Future Enhancements and Directions in Transmission.

PubMed

Shahzad, Aamir; Lee, Malrey; Kim, Suntae; Kim, Kangmin; Choi, Jae-Young; Cho, Younghwa; Lee, Keun-Kwang

2016-01-06

Today, security is a prominent issue when any type of communication is being undertaken. Like traditional networks, supervisory control and data acquisition (SCADA) systems suffer from a number of vulnerabilities. Numerous end-to-end security mechanisms have been proposed for the resolution of SCADA-system security issues, but due to insecure real-time protocol use and the reliance upon open protocols during Internet-based communication, these SCADA systems can still be compromised by security challenges. This study reviews the security challenges and issues that are commonly raised during SCADA/protocol transmissions and proposes a secure distributed-network protocol version 3 (DNP3) design, and the implementation of the security solution using a cryptography mechanism. Due to the insecurities found within SCADA protocols, the new development consists of a DNP3 protocol that has been designed as a part of the SCADA system, and the cryptographically derived security is deployed within the application layer as a part of the DNP3 stack.

OPERANT CONDITIONING OF A SPINAL REFLEX CAN IMPROVE LOCOMOTION AFTER SPINAL CORD INJURY IN HUMANS

PubMed Central

Thompson, Aiko K.; Pomerantz, Ferne; Wolpaw, Jonathan R.

2013-01-01

Operant conditioning protocols can modify the activity of specific spinal cord pathways and can thereby affect behaviors that use these pathways. To explore the therapeutic application of these protocols, we studied the impact of down-conditioning the soleus H-reflex in people with impaired locomotion caused by chronic incomplete spinal cord injury. After a baseline period in which soleus H-reflex size was measured and locomotion was assessed, subjects completed either 30 H-reflex down-conditioning sessions (DC subjects) or 30 sessions in which the H-reflex was simply measured (Unconditioned (UC) subjects), and locomotion was reassessed. Over the 30 sessions, the soleus H-reflex decreased in two-thirds of the DC subjects (a success rate similar to that in normal subjects) and remained smaller several months later. In these subjects, locomotion became faster and more symmetrical, and the modulation of EMG activity across the step-cycle increased bilaterally. Furthermore, beginning about halfway through the conditioning sessions, all of these subjects commented spontaneously that they were walking faster and farther in their daily lives, and several noted less clonus, easier stepping, and/or other improvements. The H-reflex did not decrease in the other DC subjects or in any of the UC subjects; and their locomotion did not improve. These results suggest that reflex conditioning protocols can enhance recovery of function after incomplete spinal cord injuries and possibly in other disorders as well. Because they are able to target specific spinal pathways, these protocols could be designed to address each individual’s particular deficits, and might thereby complement other rehabilitation methods. PMID:23392666

A Tree Based Broadcast Scheme for (m, k)-firm Real-Time Stream in Wireless Sensor Networks

PubMed Central

Park, HoSung; Kim, Beom-Su; Kim, Kyong Hoon; Shah, Babar; Kim, Ki-Il

2017-01-01

Recently, various unicast routing protocols have been proposed to deliver measured data from the sensor node to the sink node within the predetermined deadline in wireless sensor networks. In parallel with their approaches, some applications demand the specific service, which is based on broadcast to all nodes within the deadline, the feasible real-time traffic model and improvements in energy efficiency. However, current protocols based on either flooding or one-to-one unicast cannot meet the above requirements entirely. Moreover, as far as the authors know, there is no study for the real-time broadcast protocol to support the application-specific traffic model in WSN yet. Based on the above analysis, in this paper, we propose a new (m, k)-firm-based Real-time Broadcast Protocol (FRBP) by constructing a broadcast tree to satisfy the (m, k)-firm, which is applicable to the real-time model in resource-constrained WSNs. The broadcast tree in FRBP is constructed by the distance-based priority scheme, whereas energy efficiency is improved by selecting as few as nodes on a tree possible. To overcome the unstable network environment, the recovery scheme invokes rapid partial tree reconstruction in order to designate another node as the parent on a tree according to the measured (m, k)-firm real-time condition and local states monitoring. Finally, simulation results are given to demonstrate the superiority of FRBP compared to the existing schemes in terms of average deadline missing ratio, average throughput and energy consumption. PMID:29120404

A proposed protocol for hand and table sanitizing in chiropractic clinics and education institutions

PubMed Central

Evans, Marion Willard; Ramcharan, Michael; Floyd, Rod; Globe, Gary; Ndetan, Harrison; Williams, Ronald; Ivie, Ronald

2009-01-01

Abstract Objective By nature, chiropractic is a hands-on profession using manipulation applied to the joints with direct skin-to-skin contacts. Chiropractic tables are designed with a face piece to accommodate the prone patient's head in a neutral position and hand rests to allow for relaxed shoulders and upper spine so treatment is facilitated. The purpose of this article is to present a proposed guideline for hand and treatment table surface sanitizing for the chiropractic profession that is evidence-based and can easily be adopted by teaching institutions and doctors in the field. Methods A review of the chiropractic literature demonstrated that pathogenic microbes are present on treatment tables in teaching clinics at multiple facilities, yet no standardized protocols exist in the United States regarding table sanitizing and hand hygiene in chiropractic clinics or education institutions. This article reviews the scientific literature on the subject by using several search engines, databases, and specific reviews of documents pertaining to the topic including existing general guidelines. Results The literature has several existing guidelines that the authors used to develop a proposed protocol for hand and table sanitizing specific to the chiropractic profession. Recommendations were developed and are presented on hand hygiene and table sanitizing procedures that could lower the risk of infection for both clinical personnel and patients in chiropractic facilities. Conclusion This article offers a protocol for hand and table sanitizing in chiropractic clinics and education institutions. The chiropractic profession should consider adoption of these or similar measures and disseminate them to teaching clinics, institutions, and private practitioners. PMID:19646384

MACHETE: Environment for Space Networking Evaluation

NASA Technical Reports Server (NTRS)

Jennings, Esther H.; Segui, John S.; Woo, Simon

2010-01-01

Space Exploration missions requires the design and implementation of space networking that differs from terrestrial networks. In a space networking architecture, interplanetary communication protocols need to be designed, validated and evaluated carefully to support different mission requirements. As actual systems are expensive to build, it is essential to have a low cost method to validate and verify mission/system designs and operations. This can be accomplished through simulation. Simulation can aid design decisions where alternative solutions are being considered, support trade-studies and enable fast study of what-if scenarios. It can be used to identify risks, verify system performance against requirements, and as an initial test environment as one moves towards emulation and actual hardware implementation of the systems. We describe the development of Multi-mission Advanced Communications Hybrid Environment for Test and Evaluation (MACHETE) and its use cases in supporting architecture trade studies, protocol performance and its role in hybrid simulation/emulation. The MACHETE environment contains various tools and interfaces such that users may select the set of tools tailored for the specific simulation end goal. The use cases illustrate tool combinations for simulating space networking in different mission scenarios. This simulation environment is useful in supporting space networking design for planned and future missions as well as evaluating performance of existing networks where non-determinism exist in data traffic and/or link conditions.

Efficient generation of monoclonal antibodies from single rhesus macaque antibody secreting cells.

PubMed

Meng, Weixu; Li, Leike; Xiong, Wei; Fan, Xuejun; Deng, Hui; Bett, Andrew J; Chen, Zhifeng; Tang, Aimin; Cox, Kara S; Joyce, Joseph G; Freed, Daniel C; Thoryk, Elizabeth; Fu, Tong-Ming; Casimiro, Danilo R; Zhang, Ningyan; A Vora, Kalpit; An, Zhiqiang

2015-01-01

Nonhuman primates (NHPs) are used as a preclinical model for vaccine development, and the antibody profiles to experimental vaccines in NHPs can provide critical information for both vaccine design and translation to clinical efficacy. However, an efficient protocol for generating monoclonal antibodies from single antibody secreting cells of NHPs is currently lacking. In this study we established a robust protocol for cloning immunoglobulin (IG) variable domain genes from single rhesus macaque (Macaca mulatta) antibody secreting cells. A sorting strategy was developed using a panel of molecular markers (CD3, CD19, CD20, surface IgG, intracellular IgG, CD27, Ki67 and CD38) to identify the kinetics of B cell response after vaccination. Specific primers for the rhesus macaque IG genes were designed and validated using cDNA isolated from macaque peripheral blood mononuclear cells. Cloning efficiency was averaged at 90% for variable heavy (VH) and light (VL) domains, and 78.5% of the clones (n = 335) were matched VH and VL pairs. Sequence analysis revealed that diverse IGHV subgroups (for VH) and IGKV and IGLV subgroups (for VL) were represented in the cloned antibodies. The protocol was tested in a study using an experimental dengue vaccine candidate. About 26.6% of the monoclonal antibodies cloned from the vaccinated rhesus macaques react with the dengue vaccine antigens. These results validate the protocol for cloning monoclonal antibodies in response to vaccination from single macaque antibody secreting cells, which have general applicability for determining monoclonal antibody profiles in response to other immunogens or vaccine studies of interest in NHPs.

Molecular tools for the identification of Tuber melanosporum in agroindustry.

PubMed

Séjalon-Delmas, N; Roux, C; Martins, M; Kulifaj, M; Bécard, G; Dargent, R

2000-06-01

Tuber melanosporum Vitt., Tuber magnatum Pico, and Tuber uncinatum Chat. can be differentiated by their morphological characters. Fraud problems have arisen recently with the importation to Europe of truffles from China. T. melanosporum is morphologically very close, but distinct from the Chinese species [Tuber indicum (Cooke and Massee) and T. himalayense BC (Zhang and Winter)]. We have optimized molecular tools to unequivocally identify T. melanosporum. DNA extraction from ascocarps of black truffles is not straightforward. Problems to obtain pure DNA are due to high contents of phenolic compounds, melanine, and various polymers (proteins, polysaccharides, etc). These compounds coprecipitate with the DNA during extraction and strongly inhibit the PCR reaction. We have developed an efficient and reliable protocol for DNA extraction from truffle ascocarps. It was used successfully for DNA extraction from mycorrhizal root tips as well as from canned preparations of T. melanosporum. Several approaches to identify T. melanosporum by PCR were developed. Two specific primers for T. melanosporum were designed after comparison of the ITS region of this species with those of three Chinese fungi. They proved to be efficient to specifically detect the presence of T. melanosporum by PCR. The mycorrhizal status of trees inoculated with T. melanosporum but unable to produce truffles was confirmed in a single-step PCR reaction. A multiplex PCR approach was also developed with three sets of primers (including a specific one for Chinese truffles) to detect, in one PCR reaction, the presence of any other Tuber species mixed with T. melanosporum ascocarps. This optimized protocol, in association with the specific primers we designed, is applicable to quality control in the truffle industry from the production stages to final commercial products.

Evaluation of a commercial multiplex PCR (Unyvero i60®) designed for the diagnosis of bone and joint infections using prosthetic-joint sonication.

PubMed

Prieto-Borja, Laura; Rodriguez-Sevilla, Graciela; Auñon, Alvaro; Pérez-Jorge, Concepción; Sandoval, Enrique; Garcia-Cañete, Joaquín; Gadea, Ignacio; Fernandez-Roblas, Ricardo; Blanco, Antonio; Esteban, Jaime

2017-04-01

The development of sonication protocols over the last few years has improved the sensitivity of conventional cultures for the diagnosis of prosthetic-joint infection (PJI). However, the development of a new, specifically designed kit for the molecular diagnosis of PJI could provide a major improvement in this field. Prostheses retrieved from patients who underwent implant removal from May 2014 to May 2015 were sent for culture, and processed according to a previously defined protocol that included sonication. Furthermore, 180 microlitres of sonication fluid were used to carry out the multiplex PCR test (Unyvero i60 system ® ). A comparison of the sensitivity, specificity, positive (PPV) and negative (NPV) predictive value, was performed. The study was approved by the Clinical Research Ethics Committee. The analysis included 88 prostheses from 68 patients (1.29 prostheses/patient). The type of prostheses studied were knee (n=55), total hip (n=26), partial hip (n=5), and shoulder (n=2). Twenty-nine patients were diagnosed with a PJI (15 delayed, 12 acute, and 2 haematogenous infections). In 24 cases, the result of the PCR was positive, all but 1 corresponding to patients with clinical criteria of PJI. Nine resistance mechanisms were detected from 5 samples. The Unyvero i60 system ® showed slightly better results than traditional culture in terms of specificity and PPV. The Unyvero i60 system ® may play a role in rapid diagnosis of PJI, due to its high specificity and PPV. However, despite these results, cultures have to be performed to detect organisms not detected by the system. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

Redesigning the specificity of protein-DNA interactions with Rosetta.

PubMed

Thyme, Summer; Baker, David

2014-01-01

Building protein tools that can selectively bind or cleave specific DNA sequences requires efficient technologies for modifying protein-DNA interactions. Computational design is one method for accomplishing this goal. In this chapter, we present the current state of protein-DNA interface design with the Rosetta macromolecular modeling program. The LAGLIDADG endonuclease family of DNA-cleaving enzymes, under study as potential gene therapy reagents, has been the main testing ground for these in silico protocols. At this time, the computational methods are most useful for designing endonuclease variants that can accommodate small numbers of target site substitutions. Attempts to engineer for more extensive interface changes will likely benefit from an approach that uses the computational design results in conjunction with a high-throughput directed evolution or screening procedure. The family of enzymes presents an engineering challenge because their interfaces are highly integrated and there is significant coordination between the binding and catalysis events. Future developments in the computational algorithms depend on experimental feedback to improve understanding and modeling of these complex enzymatic features. This chapter presents both the basic method of design that has been successfully used to modulate specificity and more advanced procedures that incorporate DNA flexibility and other properties that are likely necessary for reliable modeling of more extensive target site changes.

A modified Mediterranean dietary intervention for adults with major depression: Dietary protocol and feasibility data from the SMILES trial.

PubMed

Opie, Rachelle S; O'Neil, Adrienne; Jacka, Felice N; Pizzinga, Josephine; Itsiopoulos, Catherine

2017-04-19

The SMILES trial was the first randomized controlled trial (RCT) explicitly designed to evaluate a dietary intervention, conducted by qualified dietitians, for reducing depressive symptomatology in adults with clinical depression. Here we detail the development of the prescribed diet (modified Mediterranean diet (ModiMedDiet)) for individuals with major depressive disorders (MDDs) that was designed specifically for the SMILES trial. We also present data demonstrating the extent to which this intervention achieved improvements in diet quality. The ModiMedDiet was designed using a combination of existing dietary guidelines and scientific evidence from the emerging field of nutritional psychiatric epidemiology. Sixty-seven community dwelling individuals (Melbourne, Australia) aged 18 years or over, with current poor quality diets, and MDDs were enrolled into the SMILES trial. A retention rate of 93.9 and 73.5% was observed for the dietary intervention and social support control group, respectively. The dietary intervention (ModiMedDiet) consisted of seven individual nutrition counselling sessions delivered by a qualified dietitian. The control condition comprised a social support protocol matched to the same visit schedule and length. This manuscript details the first prescriptive individualized dietary intervention delivered by dietitians for adults with major depression. Significant improvements in dietary quality were observed among individuals randomized to the ModiMedDiet group. These dietary improvements were also found to be associated with changes in depressive symptoms. The ModiMedDiet, a novel and individually tailored intervention designed specifically for adults with major depression, can be effectively implemented in clinical practice to manage this highly prevalent and debilitating condition. Australia and New Zealand Clinical Trials Register (ANZCTR): ACTRN12612000251820. Registered 29 February 2012.

23 CFR 1340.5 - Selection of observation sites.

Code of Federal Regulations, 2013 CFR

2013-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE Survey Design Requirements § 1340.5 Selection of... observation sites. The survey design shall include at a minimum the following protocols: (1) Protocol when...

23 CFR 1340.5 - Selection of observation sites.

Code of Federal Regulations, 2014 CFR

2014-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE Survey Design Requirements § 1340.5 Selection of... observation sites. The survey design shall include at a minimum the following protocols: (1) Protocol when...

23 CFR 1340.5 - Selection of observation sites.

Code of Federal Regulations, 2012 CFR

2012-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE Survey Design Requirements § 1340.5 Selection of... observation sites. The survey design shall include at a minimum the following protocols: (1) Protocol when...

Dinucleotide repeat polymorphisms in waterfowl (family Anatidae): Characterization of a sex-linked (Z-specific) and 14 autosomal loci

USGS Publications Warehouse

Buchholz, W.G.; Pearce, J.M.; Pierson, B.J.; Scribner, K.T.

1998-01-01

Canada goose (Branta Canadensis) and harlequin duck (Histrionicus histrionicus) DNAs were digested with Sau3AI, and size selected (300-700 bp) fragments were ligated into BamHI-digested pBluscriptII KS+. The enrichment protocol of Ostrander et al.1 was followed. The resulting libraries were screened using a [ƴ-32P]ATP end-labelled (CA)20 oligonucleotides as a hybridization probe. Positive clones were sequenced using cycle-sequencing protocols (Epicentre Technologies, Madison, WI) and primers flanking the inserts. PCR primers were designed to amplify the repeat and yield amplification products of ≈100-200 bp. DNA  samples were screened for variation at these loci using [ƴ-32P]ATP end-labelled primers. The products were resolved using 6% denaturing polyacrylamide gels and autoradiography.

Practice guidelines for music interventions with hospitalized pediatric patients.

PubMed

Stouffer, Janice W; Shirk, Beverly J; Polomano, Rosemary C

2007-12-01

Music therapy is an effective complementary approach that can achieve specific therapeutic outcomes in the clinical management of pediatric patients. Growing research on music interventions has generated scientific knowledge about how this modality benefits patients and has formed the basis for effective protocols that can be used in practice. Although it can be challenging to translate research-based protocols into routine clinical care at the bedside, it is essential that music therapy interventions be aligned with evidence-based information and that accepted standards be established by the music therapy discipline to achieve the greatest benefit. The importance of partnerships between nurses and music therapists is emphasized to enhance the success of music-based treatments. This discussion synthesizes research findings that can be used to design pediatric practice guidelines in the application of music therapy.

Antibody incubation at 37°C improves fluorescent immunolabeling in free-floating thick tissue sections.

PubMed

Xiao, Xia; Feng, Ya-Ping; Du, Bin; Sun, Han-Ru; Ding, You-Quan; Qi, Jian-Guo

2017-03-01

Fluorescent immunolabeling and imaging in free-floating thick (50-60 μm) tissue sections is relatively simple in practice and enables design-based non-biased stereology, or 3-D reconstruction and analysis. This method is widely used for 3-D in situ quantitative biology in many areas of biological research. However, the labeling quality and efficiency of standard protocols for fluorescent immunolabeling of these tissue sections are not always satisfactory. Here, we systematically evaluate the effects of raising the conventional antibody incubation temperatures (4°C or 21°C) to mammalian body temperature (37°C) in these protocols. Our modification significantly enhances the quality (labeling sensitivity, specificity, and homogeneity) and efficiency (antibody concentration and antibody incubation duration) of fluorescent immunolabeling of free-floating thick tissue sections.

Combination Chemotherapy and Donor Stem Cell Transplant in Treating Patients With Aplastic Anemia or Hematologic Cancer

ClinicalTrials.gov

2018-01-30

Chronic Myeloproliferative Disorders; Leukemia; Lymphoma; Myelodysplastic Syndromes; Myelodysplastic/Myeloproliferative Diseases; Nonmalignant Neoplasm; Unspecified Adult Solid Tumor, Protocol Specific; Unspecified Childhood Solid Tumor, Protocol Specific

Safe bunker designing for the 18 MV Varian 2100 Clinac: a comparison between Monte Carlo simulation based upon data and new protocol recommendations.

PubMed

Beigi, Manije; Afarande, Fatemeh; Ghiasi, Hosein

2016-01-01

The aim of this study was to compare two bunkers designed by only protocols recommendations and Monte Carlo (MC) based upon data derived for an 18 MV Varian 2100Clinac accelerator. High energy radiation therapy is associated with fast and thermal photoneutrons. Adequate shielding against the contaminant neutron has been recommended by IAEA and NCRP new protocols. The latest protocols released by the IAEA (safety report No. 47) and NCRP report No. 151 were used for the bunker designing calculations. MC method based upon data was also derived. Two bunkers using protocols and MC upon data were designed and discussed. From designed door's thickness, the door designed by the MC simulation and Wu-McGinley analytical method was closer in both BPE and lead thickness. In the case of the primary and secondary barriers, MC simulation resulted in 440.11 mm for the ordinary concrete, total concrete thickness of 1709 mm was required. Calculating the same parameters value with the recommended analytical methods resulted in 1762 mm for the required thickness using 445 mm as recommended by TVL for the concrete. Additionally, for the secondary barrier the thickness of 752.05 mm was obtained. Our results showed MC simulation and the followed protocols recommendations in dose calculation are in good agreement in the radiation contamination dose calculation. Difference between the two analytical and MC simulation methods revealed that the application of only one method for the bunker design may lead to underestimation or overestimation in dose and shielding calculations.

A universal TaqMan-based RT-PCR protocol for cost-efficient detection of small noncoding RNA.

PubMed

Jung, Ulrike; Jiang, Xiaoou; Kaufmann, Stefan H E; Patzel, Volker

2013-12-01

Several methods for the detection of RNA have been developed over time. For small RNA detection, a stem-loop reverse primer-based protocol relying on TaqMan RT-PCR has been described. This protocol requires an individual specific TaqMan probe for each target RNA and, hence, is highly cost-intensive for experiments with small sample sizes or large numbers of different samples. We describe a universal TaqMan-based probe protocol which can be used to detect any target sequence and demonstrate its applicability for the detection of endogenous as well as artificial eukaryotic and bacterial small RNAs. While the specific and the universal probe-based protocol showed the same sensitivity, the absolute sensitivity of detection was found to be more than 100-fold lower for both than previously reported. In subsequent experiments, we found previously unknown limitations intrinsic to the method affecting its feasibility in determination of mature template RISC incorporation as well as in multiplexing. Both protocols were equally specific in discriminating between correct and incorrect small RNA targets or between mature miRNA and its unprocessed RNA precursor, indicating the stem-loop RT-primer, but not the TaqMan probe, triggers target specificity. The presented universal TaqMan-based RT-PCR protocol represents a cost-efficient method for the detection of small RNAs.

Modeling Techniques for High Dependability Protocols and Architecture

NASA Technical Reports Server (NTRS)

LaValley, Brian; Ellis, Peter; Walter, Chris J.

2012-01-01

This report documents an investigation into modeling high dependability protocols and some specific challenges that were identified as a result of the experiments. The need for an approach was established and foundational concepts proposed for modeling different layers of a complex protocol and capturing the compositional properties that provide high dependability services for a system architecture. The approach centers around the definition of an architecture layer, its interfaces for composability with other layers and its bindings to a platform specific architecture model that implements the protocols required for the layer.

Validation protocol of analytical procedures for quantification of drugs in polymeric systems for parenteral administration: dexamethasone phosphate disodium microparticles.

PubMed

Martín-Sabroso, Cristina; Tavares-Fernandes, Daniel Filipe; Espada-García, Juan Ignacio; Torres-Suárez, Ana Isabel

2013-12-15

In this work a protocol to validate analytical procedures for the quantification of drug substances formulated in polymeric systems that comprise both drug entrapped into the polymeric matrix (assay:content test) and drug released from the systems (assay:dissolution test) is developed. This protocol is applied to the validation two isocratic HPLC analytical procedures for the analysis of dexamethasone phosphate disodium microparticles for parenteral administration. Preparation of authentic samples and artificially "spiked" and "unspiked" samples is described. Specificity (ability to quantify dexamethasone phosphate disodium in presence of constituents of the dissolution medium and other microparticle constituents), linearity, accuracy and precision are evaluated, in the range from 10 to 50 μg mL(-1) in the assay:content test procedure and from 0.25 to 10 μg mL(-1) in the assay:dissolution test procedure. The robustness of the analytical method to extract drug from microparticles is also assessed. The validation protocol developed allows us to conclude that both analytical methods are suitable for their intended purpose, but the lack of proportionality of the assay:dissolution analytical method should be taken into account. The validation protocol designed in this work could be applied to the validation of any analytical procedure for the quantification of drugs formulated in controlled release polymeric microparticles. Copyright © 2013 Elsevier B.V. All rights reserved.

iLAP: a workflow-driven software for experimental protocol development, data acquisition and analysis

PubMed Central

2009-01-01

Background In recent years, the genome biology community has expended considerable effort to confront the challenges of managing heterogeneous data in a structured and organized way and developed laboratory information management systems (LIMS) for both raw and processed data. On the other hand, electronic notebooks were developed to record and manage scientific data, and facilitate data-sharing. Software which enables both, management of large datasets and digital recording of laboratory procedures would serve a real need in laboratories using medium and high-throughput techniques. Results We have developed iLAP (Laboratory data management, Analysis, and Protocol development), a workflow-driven information management system specifically designed to create and manage experimental protocols, and to analyze and share laboratory data. The system combines experimental protocol development, wizard-based data acquisition, and high-throughput data analysis into a single, integrated system. We demonstrate the power and the flexibility of the platform using a microscopy case study based on a combinatorial multiple fluorescence in situ hybridization (m-FISH) protocol and 3D-image reconstruction. iLAP is freely available under the open source license AGPL from http://genome.tugraz.at/iLAP/. Conclusion iLAP is a flexible and versatile information management system, which has the potential to close the gap between electronic notebooks and LIMS and can therefore be of great value for a broad scientific community. PMID:19941647

Reliable multicast protocol specifications protocol operations

NASA Technical Reports Server (NTRS)

Callahan, John R.; Montgomery, Todd; Whetten, Brian

1995-01-01

This appendix contains the complete state tables for Reliable Multicast Protocol (RMP) Normal Operation, Multi-RPC Extensions, Membership Change Extensions, and Reformation Extensions. First the event types are presented. Afterwards, each RMP operation state, normal and extended, is presented individually and its events shown. Events in the RMP specification are one of several things: (1) arriving packets, (2) expired alarms, (3) user events, (4) exceptional conditions.

A Naturalistic Comparison of Group Transdiagnostic Behaviour Therapy (TBT) and Disorder-Specific Cognitive Behavioural Therapy Groups for the Affective Disorders.

PubMed

Gros, Daniel F; Merrifield, Colleen; Rowa, Karen; Szafranski, Derek D; Young, Lisa; McCabe, Randi E

2018-05-29

Transdiagnostic psychotherapies are designed to apply the same underlying treatment principles across a set of psychiatric disorders, without significant tailoring to specific diagnoses. Several transdiagnostic psychotherapy protocols have been developed recently, each of which has its own strengths and weaknesses. One promising treatment is Transdiagnostic Behaviour Therapy (TBT), in that it is one of the few transdiagnostic treatments to date shown to be effective in patients with depressive and anxiety disorders. However, TBT has only been investigated via individual psychotherapy. The present study investigated the effectiveness of a group protocol for TBT, compared with disorder-specific group psychotherapies, in a naturalistic setting. 109 participants with various diagnoses of affective disorders completed either group TBT (n = 37) or a disorder-specific group psychotherapy (n = 72). Measures included assessments of psychiatric symptomatology and transdiagnostic impairment at baseline and post-treatment. Overall, participants in the TBT group demonstrated significant improvements across all measures. When compared with disorder-specific groups, no statistical differences were observed between groups across symptoms; however, participants in the TBT group demonstrated roughly twice the treatment effect sizes in transdiagnostic impairment compared with participants in the disorder-specific groups. In addition, when participants from the most well-represented diagnosis and disorder-specific treatment (social anxiety disorder) were investigated separately, participants in the TBT group demonstrated significantly larger improvements in comorbid depressive symptoms than participants in the disorder-specific treatment. Pending replication and additional comparison studies, group TBT may provide an effective group treatment option for patients with affective disorders.

75 FR 35973 - Trademark Technical and Conforming Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-24

... Madrid Protocol (``Madrid Protocol registrants'') to file Affidavits or Declarations of Use or Excusable... to maintain a registration. Specifically, the legislation gives Madrid Protocol registrants the... the name of the owner of the registration. Previously, the statute did not provide Madrid Protocol...

In-Space Networking on NASA's SCAN Testbed

NASA Technical Reports Server (NTRS)

Brooks, David E.; Eddy, Wesley M.; Clark, Gilbert J.; Johnson, Sandra K.

2016-01-01

The NASA Space Communications and Navigation (SCaN) Testbed, an external payload onboard the International Space Station, is equipped with three software defined radios and a flight computer for supporting in-space communication research. New technologies being studied using the SCaN Testbed include advanced networking, coding, and modulation protocols designed to support the transition of NASAs mission systems from primarily point to point data links and preplanned routes towards adaptive, autonomous internetworked operations needed to meet future mission objectives. Networking protocols implemented on the SCaN Testbed include the Advanced Orbiting Systems (AOS) link-layer protocol, Consultative Committee for Space Data Systems (CCSDS) Encapsulation Packets, Internet Protocol (IP), Space Link Extension (SLE), CCSDS File Delivery Protocol (CFDP), and Delay-Tolerant Networking (DTN) protocols including the Bundle Protocol (BP) and Licklider Transmission Protocol (LTP). The SCaN Testbed end-to-end system provides three S-band data links and one Ka-band data link to exchange space and ground data through NASAs Tracking Data Relay Satellite System or a direct-to-ground link to ground stations. The multiple data links and nodes provide several upgradable elements on both the space and ground systems. This paper will provide a general description of the testbeds system design and capabilities, discuss in detail the design and lessons learned in the implementation of the network protocols, and describe future plans for continuing research to meet the communication needs for evolving global space systems.

Partial-mouth periodontal examination protocols for the determination of the prevalence and extent of gingival bleeding in adolescents.

PubMed

Machado, Michely Ediani; Tomazoni, Fernanda; Casarin, Maísa; Ardenghi, Thiago M; Zanatta, Fabricio Batistin

2017-10-01

To compare the performance of partial-mouth periodontal examination (PMPE) protocols with different cut-off points to the full-mouth examination (FME) in the assessment of the prevalence and extent of gingival bleeding in adolescents. A cross-sectional study was conducted involving 12-year-old adolescents. Following a systematic two-stage cluster sampling process, 1134 individuals were evaluated. Different PMPE protocols were compared to the FME with six sites per tooth. Sensitivity, specificity, area under the ROC curve (AUC), intraclass correlation coefficient (ICC), relative and absolute biases and the inflation factor were assessed for each PMPE protocol with different cut-off points for the severity of gingival bleeding. The highest AUC values were found for the six-site two-diagonal quadrant (2-4) (0.97), six-site random half-mouth (0.95) and Community Periodontal Index (0.95) protocols. The assessment of three sites [mesiobuccal (MB), buccal (B) and distolingual (DL)] in two diagonal quadrants and the random half-mouth protocol had higher sensitivity and lower specificity than the same protocols with distobuccal (DB) sites. However, the use of DB sites led to better specificity and improved the balance between sensitivity and specificity, except for the two-diagonal quadrant (1-3) protocol. The ≥1 cut-off point led to the most discrepant results from the FME. Six-site two-diagonal quadrant (2-4) and random half-mouth assessments perform better in the evaluation of gingival bleeding in adolescents. However, when a faster protocol is needed, a two-diagonal quadrant assessment using only MB, B and DL sites can be used with no important loss of information. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Effectiveness of functional hand splinting and the cognitive orientation to occupational performance (CO-OP) approach in children with cerebral palsy and brain injury: two randomised controlled trial protocols

PubMed Central

2014-01-01

Background Cerebral palsy (CP) and brain injury (BI) are common conditions that have devastating effects on a child’s ability to use their hands. Hand splinting and task-specific training are two interventions that are often used to address deficits in upper limb skills, both in isolation or concurrently. The aim of this paper is to describe the method to be used to conduct two randomised controlled trials (RCT) investigating (a) the immediate effect of functional hand splints, and (b) the effect of functional hand splints used concurrently with task-specific training compared to functional hand splints alone, and to task-specific training alone in children with CP and BI. The Cognitive Orientation to Occupational Performance (CO-OP) approach will be the task-specific training approach used. Methods/Design Two concurrent trials; a two group, parallel design, RCT with a sample size of 30 participants (15 per group); and a three group, parallel design, assessor blinded, RCT with a sample size of 45 participants (15 per group). Inclusion criteria: age 4-15 years; diagnosis of CP or BI; Manual Abilities Classification System (MACS) level I – IV; hand function goals; impaired hand function; the cognitive, language and behavioural ability to participate in CO-OP. Participants will be randomly allocated to one of 3 groups; (1) functional hand splint only (n=15); (2) functional hand splint combined with task-specific training (n=15); (3) task-specific training only (n=15). Allocation concealment will be achieved using sequentially numbered, sealed opaque envelopes opened by an off-site officer after baseline measures. Treatment will be provided for a period of 2 weeks, with outcome measures taken at baseline, 1 hour after randomisation, 2 weeks and 10 weeks. The functional hand splint will be a wrist cock-up splint (+/- thumb support or supination strap). Task-specific training will involve 10 sessions of CO-OP provided in a group of 2-4 children. Primary outcome measures will be the Canadian Occupational Performance Measure (COPM) and the Goal Attainment Scale (GAS). Analysis will be conducted on an intention-to-treat basis. Discussion This paper outlines the protocol for two randomised controlled trials investigating functional hand splints and CO-OP for children with CP and BI. PMID:25023385

Rethinking the NTCIP Design and Protocols - Analyzing the Issues

DOT National Transportation Integrated Search

1998-03-03

This working paper discusses the issues involved in changing the current draft NTCIP standard from an X.25-based protocol stack to an Internet-based protocol stack. It contains a methodology which could be used to change NTCIP's base protocols. This ...

A short protocol using dexamethasone and monophosphoryl lipid A generates tolerogenic dendritic cells that display a potent migratory capacity to lymphoid chemokines

PubMed Central

2013-01-01

Background Generation of tolerogenic dendritic cells (TolDCs) for therapy is challenging due to its implications for the design of protocols suitable for clinical applications, which means not only using safe products, but also working at defining specific biomarkers for TolDCs identification, developing shorter DCs differentiation methods and obtaining TolDCs with a stable phenotype. We describe here, a short-term protocol for TolDCs generation, which are characterized in terms of phenotypic markers, cytokines secretion profile, CD4+ T cell-stimulatory ability and migratory capacity. Methods TolDCs from healthy donors were generated by modulation with dexamethasone plus monophosphoryl lipid A (MPLA-tDCs). We performed an analysis of MPLA-tDCs in terms of yield, viability, morphology, phenotypic markers, cytokines secretion profile, stability, allogeneic and antigen-specific CD4+ T-cell stimulatory ability and migration capacity. Results After a 5-day culture, MPLA-tDCs displayed reduced expression of costimulatory and maturation molecules together to an anti-inflammatory cytokines secretion profile, being able to maintain these tolerogenic features even after the engagement of CD40 by its cognate ligand. In addition, MPLA-tDCs exhibited reduced capabilities to stimulate allogeneic and antigen-specific CD4+ T cell proliferation, and induced an anti-inflammatory cytokine secretion pattern. Among potential tolerogenic markers studied, only TLR-2 was highly expressed in MPLA-tDCs when compared to mature and immature DCs. Remarkable, like mature DCs, MPLA-tDCs displayed a high CCR7 and CXCR4 expression, both chemokine receptors involved in migration to secondary lymphoid organs, and even more, in an in vitro assay they exhibited a high migration response towards CCL19 and CXCL12. Conclusion We describe a short-term protocol for TolDC generation, which confers them a stable phenotype and migratory capacity to lymphoid chemokines, essential features for TolDCs to be used as therapeutics for autoimmunity and prevention of graft rejection. PMID:23706017

Computational Enzyme Design: Advances, hurdles and possible ways forward

PubMed Central

Linder, Mats

2012-01-01

This mini review addresses recent developments in computational enzyme design. Successful protocols as well as known issues and limitations are discussed from an energetic perspective. It will be argued that improved results can be obtained by including a dynamic treatment in the design protocol. Finally, a molecular dynamics-based approach for evaluating and refining computational designs is presented. PMID:24688650

Internet MEMS design tools based on component technology

NASA Astrophysics Data System (ADS)

Brueck, Rainer; Schumer, Christian

1999-03-01

The micro electromechanical systems (MEMS) industry in Europe is characterized by small and medium sized enterprises specialized on products to solve problems in specific domains like medicine, automotive sensor technology, etc. In this field of business the technology driven design approach known from micro electronics is not appropriate. Instead each design problem aims at its own, specific technology to be used for the solution. The variety of technologies at hand, like Si-surface, Si-bulk, LIGA, laser, precision engineering requires a huge set of different design tools to be available. No single SME can afford to hold licenses for all these tools. This calls for a new and flexible way of designing, implementing and distributing design software. The Internet provides a flexible manner of offering software access along with methodologies of flexible licensing e.g. on a pay-per-use basis. New communication technologies like ADSL, TV cable of satellites as carriers promise to offer a bandwidth sufficient even for interactive tools with graphical interfaces in the near future. INTERLIDO is an experimental tool suite for process specification and layout verification for lithography based MEMS technologies to be accessed via the Internet. The first version provides a Java implementation even including a graphical editor for process specification. Currently, a new version is brought into operation that is based on JavaBeans component technology. JavaBeans offers the possibility to realize independent interactive design assistants, like a design rule checking assistants, a process consistency checking assistants, a technology definition assistants, a graphical editor assistants, etc. that may reside distributed over the Internet, communicating via Internet protocols. Each potential user thus is able to configure his own dedicated version of a design tool set dedicated to the requirements of the current problem to be solved.

Performance Evaluation of a PEM Scanner Using the NEMA NU 4—2008 Small Animal PET Standards

NASA Astrophysics Data System (ADS)

Luo, Weidong; Anashkin, Edward; Matthews, Christopher G.

2010-02-01

The recently published NEMA NU 4-2008 Standards has been specially designed for evaluating the performance of small animal PET scanners used in preclinical applications. In this paper, we report on the NU 4 performance of a clinical positron emission mammography (PEM) system. Since there are no PEM specific performance test protocols available, and the NU 2 protocol (intended for whole-body PET scanners) cannot be applied without modification due to the compact design of the PEM scanner, we decided to evaluate the NU 4 Standards as an alternative. We obtained the following results: Trans-axial spatial resolution 1.8 mm FWHM for high resolution reconstruction mode and 2.4 mm FWHM for standard resolution reconstruction mode with no significant variation within the field of view. The total system sensitivity was 0.16 cps/Bq. In image quality testing, the uniformity was found to be 3.9% STD at the standard resolution mode and 5.6% at the high resolution mode when measured with a 34 mm paddle separation. The NEMA NU 4-2008 Standards were found to be a practicable tool to evaluate the performance of the PEM scanner after some modifications to address the specifics of its detector configuration. Furthermore, the PEM scanner's in-plane spatial resolution was comparable to other small animal PET scanners with good image quality.

Etude et simulation du protocole TTEthernet sur un sous-systeme de gestion de vols et adaptation de la planification des tâches a des fins de simulation

NASA Astrophysics Data System (ADS)

Abidi, Dhafer

TTEthernet is a deterministic network technology that makes enhancements to Layer 2 Quality-of-Service (QoS) for Ethernet. The components that implement its services enrich the Ethernet functionality with distributed fault-tolerant synchronization, robust temporal partitioning bandwidth and synchronous communication with fixed latency and low jitter. TTEthernet services can facilitate the design of scalable, robust, less complex distributed systems and architectures tolerant to faults. Simulation is nowadays an essential step in critical systems design process and represents a valuable support for validation and performance evaluation. CoRE4INET is a project bringing together all TTEthernet simulation models currently available. It is based on the extension of models of OMNeT ++ INET framework. Our objective is to study and simulate the TTEthernet protocol on a flight management subsystem (FMS). The idea is to use CoRE4INET to design the simulation model of the target system. The problem is that CoRE4INET does not offer a task scheduling tool for TTEthernet network. To overcome this problem we propose an adaptation for simulation purposes of a task scheduling approach based on formal specification of network constraints. The use of Yices solver allowed the translation of the formal specification into an executable program to generate the desired transmission plan. A case study allowed us at the end to assess the impact of the arrangement of Time-Triggered frames offsets on the performance of each type of the system traffic.

Virtual standardized patients: an interactive method to examine variation in depression care among primary care physicians

PubMed Central

Hooper, Lisa M.; Weinfurt, Kevin P.; Cooper, Lisa A.; Mensh, Julie; Harless, William; Kuhajda, Melissa C.; Epstein, Steven A.

2009-01-01

Background Some primary care physicians provide less than optimal care for depression (Kessler et al., Journal of the American Medical Association 291, 2581–90, 2004). However, the literature is not unanimous on the best method to use in order to investigate this variation in care. To capture variations in physician behaviour and decision making in primary care settings, 32 interactive CD-ROM vignettes were constructed and tested. Aim and method The primary aim of this methods-focused paper was to review the extent to which our study method – an interactive CD-ROM patient vignette methodology – was effective in capturing variation in physician behaviour. Specifically, we examined the following questions: (a) Did the interactive CD-ROM technology work? (b) Did we create believable virtual patients? (c) Did the research protocol enable interviews (data collection) to be completed as planned? (d) To what extent was the targeted study sample size achieved? and (e) Did the study interview protocol generate valid and reliable quantitative data and rich, credible qualitative data? Findings Among a sample of 404 randomly selected primary care physicians, our voice-activated interactive methodology appeared to be effective. Specifically, our methodology – combining interactive virtual patient vignette technology, experimental design, and expansive open-ended interview protocol – generated valid explanations for variations in primary care physician practice patterns related to depression care. PMID:20463864

Comparison of low back mobility and stability exercises from Pilates in non-specific low back pain: A study protocol of a randomized controlled trial.

PubMed

Miranda, Iã Ferreira; Souza, Catiane; Schneider, Alexandre Tavares; Chagas, Leandro Campos; Loss, Jefferson Fagundes

2018-05-01

There is some evidence in the literature about the effectiveness of the Pilates methods in the low back pain. Moreover, Pilates focus on exercises that empathizes the stability and/or mobility of the spine. Therefore, it is discussed in the literature whether higher levels of stability or mobility of the lumbar spine generates better results, both in performance and rehabilitation for low back pain. Compare the effects of the low back mobility and stability exercises from Pilates Method on low back pain, disability and movement functionality in individuals with non-specific chronic low back pain. 28 participants will be randomized into two exercise protocol from Pilates methods, one focusing on low back stability and other on low back mobility. Low back pain (visual analogic scale), low back disability (Oswestry) and movement functionality (7 functional movement tasks) will be evaluated before and after 10 sessions of Pilates exercise by the same trained assessor. A mixed designed ANOVA with two factors will be used. This study is the first to compare these outcomes for chronic low back pain participants with two exercises protocol focusing on low back mobility and stability and the results will evaluate what to prioritize with Pilates exercises to give better results for that population. Copyright © 2017 Elsevier Ltd. All rights reserved.

Issues of diagnostic review in brain tumor studies: from the Brain Tumor Epidemiology Consortium.

PubMed

Davis, Faith G; Malmer, Beatrice S; Aldape, Ken; Barnholtz-Sloan, Jill S; Bondy, Melissa L; Brännström, Thomas; Bruner, Janet M; Burger, Peter C; Collins, V Peter; Inskip, Peter D; Kruchko, Carol; McCarthy, Bridget J; McLendon, Roger E; Sadetzki, Siegal; Tihan, Tarik; Wrensch, Margaret R; Buffler, Patricia A

2008-03-01

Epidemiologists routinely conduct centralized single pathology reviews to minimize interobserver diagnostic variability, but this practice does not facilitate the combination of studies across geographic regions and institutions where diagnostic practices differ. A meeting of neuropathologists and epidemiologists focused on brain tumor classification issues in the context of protocol needs for consortial studies (http://epi.grants.cancer.gov/btec/). It resulted in recommendations relevant to brain tumors and possibly other rare disease studies. Two categories of brain tumors have enough general agreement over time, across regions, and between individual pathologists that one can consider using existing diagnostic data without further review: glioblastomas and meningiomas (as long as uniform guidelines such as those provided by the WHO are used). Prospective studies of these tumors benefit from collection of pathology reports, at a minimum recording the pathology department and classification system used in the diagnosis. Other brain tumors, such as oligodendroglioma, are less distinct and require careful histopathologic review for consistent classification across study centers. Epidemiologic study protocols must consider the study specific aims, diagnostic changes that have taken place over time, and other issues unique to the type(s) of tumor being studied. As diagnostic changes are being made rapidly, there are no readily available answers on disease classification issues. It is essential that epidemiologists and neuropathologists collaborate to develop appropriate study designs and protocols for specific hypothesis and populations.

The importance of quality control in validating concentrations of contaminants of emerging concern in source and treated drinking water samples.

PubMed

Batt, Angela L; Furlong, Edward T; Mash, Heath E; Glassmeyer, Susan T; Kolpin, Dana W

2017-02-01

A national-scale survey of 247 contaminants of emerging concern (CECs), including organic and inorganic chemical compounds, and microbial contaminants, was conducted in source and treated drinking water samples from 25 treatment plants across the United States. Multiple methods were used to determine these CECs, including six analytical methods to measure 174 pharmaceuticals, personal care products, and pesticides. A three-component quality assurance/quality control (QA/QC) program was designed for the subset of 174 CECs which allowed us to assess and compare performances of the methods used. The three components included: 1) a common field QA/QC protocol and sample design, 2) individual investigator-developed method-specific QA/QC protocols, and 3) a suite of 46 method comparison analytes that were determined in two or more analytical methods. Overall method performance for the 174 organic chemical CECs was assessed by comparing spiked recoveries in reagent, source, and treated water over a two-year period. In addition to the 247 CECs reported in the larger drinking water study, another 48 pharmaceutical compounds measured did not consistently meet predetermined quality standards. Methodologies that did not seem suitable for these analytes are overviewed. The need to exclude analytes based on method performance demonstrates the importance of additional QA/QC protocols. Published by Elsevier B.V.

Developing patient-centered treatment protocols in brain stimulation: a rationale for combining quantitative and qualitative approaches in persons with HIV.

PubMed

Rosedale, Mary; Malaspina, Dolores; Malamud, Daniel; Strauss, Shiela M; Horne, Jaclyn D; Abouzied, Salman; Cruciani, Ricardo A; Knotkova, Helena

2012-01-01

This article reports and discusses how quantitative (physiological and behavioral) and qualitative methods are being combined in an open-label pilot feasibility study. The study evaluates safety, tolerability, and acceptability of a protocol to treat depression in HIV-infected individuals, using a 2-week block of transcranial direct current stimulation (tDCS) over the dorsolateral prefrontal cortex. Major depressive disorder (MDD) is the second most prevalent psychiatric disorder after substance abuse among HIV-positive adults, and novel antidepressant treatments are needed for this vulnerable population. The authors describe the challenges and contributions derived from different research perspectives and methodological approaches and provide a philosophical framework for combining quantitative and qualitative measurements for a fuller examination of the disorder. Four methodological points are presented: (1) the value of combining quantitative and qualitative approaches; (2) the need for context-specific measures when studying patients with medical and psychiatric comorbidities; (3) the importance of research designs that integrate physiological, behavioral, and qualitative approaches when evaluating novel treatments; and (4) the need to explore the relationships between biomarkers, clinical symptom assessments, patient self-evaluations, and patient experiences when developing new, patient-centered protocols. The authors conclude that the complexity of studying novel treatments in complex and new patient populations requires complex research designs to capture the richness of data that inform translational research.

Role of Nutritional Supplements Complementing Nutrient-Dense Diets: General Versus Sport/Exercise-Specific Dietary Guidelines Related to Energy Expenditure

NASA Astrophysics Data System (ADS)

Kleiner, Susan; Greenwood, Mike

A nutrient-dense diet is a critical aspect in attaining optimal exercise training and athletic performance outcomes. Although including safe and effective nutritional supplements in the dietary design can be extremely helpful in promoting adequate caloric ingestion, they are not sufficient for promoting adequate caloric ingestion based on individualized caloric expenditure needs without the proper diet. Specifically, a strategic and scientifically based nutrient-dense dietary profile should be created by qualified professionals to meet the sport/exercise-specific energy demands of any individual involved in select training intensity protocols. Finally, ingesting the right quantity and quality of nutrient dense calories at precise windows of opportunity becomes vital in attaining desired training and/or competitive performance outcomes.

Competitive RT-PCR Strategy for Quantitative Evaluation of the Expression of Tilapia (Oreochromis niloticus) Growth Hormone Receptor Type I

PubMed Central

2009-01-01

Quantization of gene expression requires that an accurate measurement of a specific transcript is made. In this paper, a quantitative reverse transcription-polymerase chain reaction (RT-PCR) by competition for tilapia growth hormone receptor type I is designed and validated. This experimental procedure was used to determine the abundance of growth hormone receptor type I transcript in different tilapia tissues. The results obtained with this developed competitive RT-PCR were similar to real-time PCR results reported recently. This protocol provides a reliable alternative, but less expensive than real-time PCR to quantify specific genes. PMID:19495916

Hybridization of Environmental Microbial Community Nucleic Acids by GeoChip.

PubMed

Van Nostrand, Joy D; Yin, Huaqin; Wu, Liyou; Yuan, Tong; Zhou, Jizhong

2016-01-01

Functional gene arrays, like the GeoChip, allow for the study of tens of thousands of genes in a single assay. The GeoChip array (5.0) contains probes for genes involved in geochemical cycling (N, C, S, and P), metal homeostasis, stress response, organic contaminant degradation, antibiotic resistance, secondary metabolism, and virulence factors as well as genes specific for fungi, protists, and viruses. Here, we briefly describe GeoChip design strategies (gene selection and probe design) and discuss minimum quantity and quality requirements for nucleic acids. We then provide detailed protocols for amplification, labeling, and hybridization of samples to the GeoChip.

A technology training protocol for meeting QSEN goals: Focusing on meaningful learning.

PubMed

Luo, Shuhong; Kalman, Melanie

2018-01-01

The purpose of this paper is to describe and discuss how we designed and developed a 12-step technology training protocol. The protocol is meant to improve meaningful learning in technology education so that nursing students are able to meet the informatics requirements of Quality and Safety Education in Nursing competencies. When designing and developing the training protocol, we used a simplified experiential learning model that addressed the core features of meaningful learning: to connect new knowledge with students' prior knowledge and real-world workflow. Before training, we identified students' prior knowledge and workflow tasks. During training, students learned by doing, reflected on their prior computer skills and workflow, designed individualized procedures for integration into their workflow, and practiced the self-designed procedures in real-world settings. The trainer was a facilitator who provided a meaningful learning environment, asked the right questions to guide reflective conversation, and offered scaffoldings at critical moments. This training protocol could significantly improve nurses' competencies in using technologies and increase their desire to adopt new technologies. © 2017 Wiley Periodicals, Inc.

A Novel Cross-Layer Routing Protocol Based on Network Coding for Underwater Sensor Networks.

PubMed

Wang, Hao; Wang, Shilian; Bu, Renfei; Zhang, Eryang

2017-08-08

Underwater wireless sensor networks (UWSNs) have attracted increasing attention in recent years because of their numerous applications in ocean monitoring, resource discovery and tactical surveillance. However, the design of reliable and efficient transmission and routing protocols is a challenge due to the low acoustic propagation speed and complex channel environment in UWSNs. In this paper, we propose a novel cross-layer routing protocol based on network coding (NCRP) for UWSNs, which utilizes network coding and cross-layer design to greedily forward data packets to sink nodes efficiently. The proposed NCRP takes full advantages of multicast transmission and decode packets jointly with encoded packets received from multiple potential nodes in the entire network. The transmission power is optimized in our design to extend the life cycle of the network. Moreover, we design a real-time routing maintenance protocol to update the route when detecting inefficient relay nodes. Substantial simulations in underwater environment by Network Simulator 3 (NS-3) show that NCRP significantly improves the network performance in terms of energy consumption, end-to-end delay and packet delivery ratio compared with other routing protocols for UWSNs.

Long-term exercise-specific neuroprotection in spinal muscular atrophy-like mice.

PubMed

Chali, Farah; Desseille, Céline; Houdebine, Léo; Benoit, Evelyne; Rouquet, Thaïs; Bariohay, Bruno; Lopes, Philippe; Branchu, Julien; Della Gaspera, Bruno; Pariset, Claude; Chanoine, Christophe; Charbonnier, Frédéric; Biondi, Olivier

2016-04-01

The real impact of physical exercise parameters, i.e. intensity, type of contraction and solicited energetic metabolism, on neuroprotection in the specific context of neurodegeneration remains poorly explored. In this study behavioural, biochemical and cellular analyses were conducted to compare the effects of two different long-term exercise protocols, high intensity swimming and low intensity running, on motor units of a type 3 spinal muscular atrophy (SMA)-like mouse model. Our data revealed a preferential SMA-induced death of intermediate and fast motor neurons which was limited by the swimming protocol only, suggesting a close relationship between neuron-specific protection and their activation levels by specific exercise. The exercise-induced neuroprotection was independent of SMN protein expression and associated with specific metabolic and behavioural adaptations with notably a swimming-induced reduction of muscle fatigability. Our results provide new insight into the motor units' adaptations to different physical exercise parameters and will contribute to the design of new active physiotherapy protocols for patient care. Spinal muscular atrophy (SMA) is a group of autosomal recessive neurodegenerative diseases differing in their clinical outcome, characterized by the specific loss of spinal motor neurons, caused by insufficient level of expression of the protein survival of motor neuron (SMN). No cure is at present available for SMA. While physical exercise might represent a promising approach for alleviating SMA symptoms, the lack of data dealing with the effects of different exercise types on diseased motor units still precludes the use of active physiotherapy in SMA patients. In the present study, we have evaluated the efficiency of two long-term physical exercise paradigms, based on either high intensity swimming or low intensity running, in alleviating SMA symptoms in a mild type 3 SMA-like mouse model. We found that 10 months' physical training induced significant benefits in terms of resistance to muscle damage, energetic metabolism, muscle fatigue and motor behaviour. Both exercise types significantly enhanced motor neuron survival, independently of SMN expression, leading to the maintenance of neuromuscular junctions and skeletal muscle phenotypes, particularly in the soleus, plantaris and tibialis of trained mice. Most importantly, both exercises significantly improved neuromuscular excitability properties. Further, all these training-induced benefits were quantitatively and qualitatively related to the specific characteristics of each exercise, suggesting that the related neuroprotection is strongly dependent on the specific activation of some motor neuron subpopulations. Taken together, the present data show significant long-term exercise benefits in type 3 SMA-like mice providing important clues for designing rehabilitation programmes in patients. © 2016 The Authors. The Journal of Physiology © 2016 The Physiological Society.

77 FR 47707 - Public Housing Assessment System (PHAS): Physical Condition Scoring Notice and Revised Dictionary...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-09

... Standards (UPCS) inspection protocol was designed to be a uniform inspection process and standard for HUD's... frequency of inspections based on the results the UPCS inspection. UPCS was designed to assess the condition... physical assessment score. HUD Response: The UPCS inspection protocol as designed assesses the physical...

Safe bunker designing for the 18 MV Varian 2100 Clinac: a comparison between Monte Carlo simulation based upon data and new protocol recommendations

PubMed Central

Beigi, Manije; Afarande, Fatemeh; Ghiasi, Hosein

2016-01-01

Aim The aim of this study was to compare two bunkers designed by only protocols recommendations and Monte Carlo (MC) based upon data derived for an 18 MV Varian 2100Clinac accelerator. Background High energy radiation therapy is associated with fast and thermal photoneutrons. Adequate shielding against the contaminant neutron has been recommended by IAEA and NCRP new protocols. Materials and methods The latest protocols released by the IAEA (safety report No. 47) and NCRP report No. 151 were used for the bunker designing calculations. MC method based upon data was also derived. Two bunkers using protocols and MC upon data were designed and discussed. Results From designed door's thickness, the door designed by the MC simulation and Wu–McGinley analytical method was closer in both BPE and lead thickness. In the case of the primary and secondary barriers, MC simulation resulted in 440.11 mm for the ordinary concrete, total concrete thickness of 1709 mm was required. Calculating the same parameters value with the recommended analytical methods resulted in 1762 mm for the required thickness using 445 mm as recommended by TVL for the concrete. Additionally, for the secondary barrier the thickness of 752.05 mm was obtained. Conclusion Our results showed MC simulation and the followed protocols recommendations in dose calculation are in good agreement in the radiation contamination dose calculation. Difference between the two analytical and MC simulation methods revealed that the application of only one method for the bunker design may lead to underestimation or overestimation in dose and shielding calculations. PMID:26900357

Rendezvous Protocols and Dynamic Frequency Hopping Interference Design for Anti-Jamming Satellite Communication

DTIC Science & Technology

2013-11-25

previously considered this proactive approach to combat unintentional, persistent (non- reactive) interference . In this project, we plan on extending our...channel” (or code ) by chance, through public knowledge of the underlying protocol semantics , or by compromising one of the network devices. An alternative...AFRL-RV-PS- AFRL-RV-PS- TR-2013-0142 TR-2013-0142 RENDEZVOUS PROTOCOLS AND DYNAMIC FREQUENCY HOPPING INTERFERENCE DESIGN FOR ANTI-JAMMING

The Acute Effects of Static Stretching Compared to Dynamic Stretching with and without an Active Warm up on Anaerobic Performance

PubMed Central

KENDALL, BRADLEY J.

2017-01-01

The Wingate Anaerobic Test (WAnT) has been used in many studies to determine anaerobic performance. However, there has been poor reporting of warm-up protocols and limited consistency between warm-up methods that have been used. With the WAnT being such a commonly-used test, consistency in warm-up methods is essential in order to compare results across studies. Therefore, this study was designed to compare how static stretching, dynamic stretching, and an active warm-up affect WAnT performance. Ten recreationally active participants (5 males, 5 females) with a mean (SD) age of 23.3 (0.7) volunteered for this study. Subjects were randomized to a specific order of five warm-up protocols, which were performed on individual days followed by a WAnT. Peak power, mean power, power drop, and fatigue index were compared for each trial using a repeated measures ANOVA. For peak power, results revealed that warm-up protocol had a significant effect, F(4,36) = 3.90, p = .01, partial η2 = .302. It was hypothesized that the dynamic stretching would lead to greater peak power than the static stretching protocol. However, results of post hoc analyses failed to detect a significant difference (p =.065). For the other measured variables no significant differences were found. The findings from this study suggest that warm-up protocols may have significantly different impacts on peak power during the WAnT. Additional research should use larger sample sizes and further explore these warm-up protocols. Developing a standardized warm-up protocol for the WAnT may improve consistency between studies. PMID:28479947

The Acute Effects of Static Stretching Compared to Dynamic Stretching with and without an Active Warm up on Anaerobic Performance.

PubMed

Kendall, Bradley J

2017-01-01

The Wingate Anaerobic Test (WAnT) has been used in many studies to determine anaerobic performance. However, there has been poor reporting of warm-up protocols and limited consistency between warm-up methods that have been used. With the WAnT being such a commonly-used test, consistency in warm-up methods is essential in order to compare results across studies. Therefore, this study was designed to compare how static stretching, dynamic stretching, and an active warm-up affect WAnT performance. Ten recreationally active participants (5 males, 5 females) with a mean (SD) age of 23.3 (0.7) volunteered for this study. Subjects were randomized to a specific order of five warm-up protocols, which were performed on individual days followed by a WAnT. Peak power, mean power, power drop, and fatigue index were compared for each trial using a repeated measures ANOVA. For peak power, results revealed that warm-up protocol had a significant effect, F (4,36) = 3.90, p = .01, partial η 2 = .302. It was hypothesized that the dynamic stretching would lead to greater peak power than the static stretching protocol. However, results of post hoc analyses failed to detect a significant difference (p =.065). For the other measured variables no significant differences were found. The findings from this study suggest that warm-up protocols may have significantly different impacts on peak power during the WAnT. Additional research should use larger sample sizes and further explore these warm-up protocols. Developing a standardized warm-up protocol for the WAnT may improve consistency between studies.

CCSDS File Delivery Protocol (CFDP): Why it's Useful and How it Works

NASA Technical Reports Server (NTRS)

Ray, Tim

2003-01-01

Reliable delivery of data products is often required across space links. For example, a NASA mission will require reliable delivery of images produced by an on-board detector. Many missions have their own (unique) way of accomplishing this, requiring custom software. Many missions also require manual operations (e.g. the telemetry receiver software keeps track of what data is missing, and a person manually inputs the appropriate commands to request retransmissions). The Consultative Committee for Space Data Systems (CCSDS) developed the CCSDS File Delivery Protocol (CFDP) specifically for this situation. CFDP is an international standard communication protocol that provides reliable delivery of data products. It is designed for use across space links. It will work well if run over the widely used CCSDS Telemetry and Telecommand protocols. However, it can be run over any protocol, and will work well as long as the underlying protocol delivers a reasonable portion of the data. The CFDP receiver will autonomously determine what data is missing, and request retransmissions as needed. The CFDP sender will autonomously perform the requested transmissions. When the entire data product is delivered, the CFDP receiver will let the CFDP sender know that the transaction has completed successfully. The result is that custom software becomes standard, and manual operations become autonomous. This paper will consider various ways of achieving reliable file delivery, explain why CFDP is the optimal choice for use over space links, explain how the core protocol works, and give some guidance on how to best utilize CFDP within various mission scenarios. It will also touch on additional features of CFDP, as well as other uses for CFDP (e.g. the loading of on-board memory and tables).

Evaluation of neurofeedback in ADHD: the long and winding road.

PubMed

Arns, Martijn; Heinrich, Hartmut; Strehl, Ute

2014-01-01

Among the clinical applications of neurofeedback, most research has been conducted in ADHD. As an introduction a short overview of the general history of neurofeedback will be given, while the main part of the paper deals with a review of the current state of neurofeedback in ADHD. A meta-analysis on neurofeedback from 2009 found large effect sizes for inattention and impulsivity and medium effects sizes for hyperactivity. Since 2009 several new studies, including 4 placebo-controlled studies, have been published. These latest studies are reviewed and discussed in more detail. The review focuses on studies employing (1) semi-active, (2) active, and (3) placebo-control groups. The assessment of specificity of neurofeedback treatment in ADHD is discussed and it is concluded that standard protocols such as theta/beta, SMR and slow cortical potentials neurofeedback are well investigated and have demonstrated specificity. The paper ends with an outlook on future questions and tasks. It is concluded that future controlled clinical trials should, in a next step, focus on such known protocols, and be designed along the lines of learning theory. Copyright © 2013 Elsevier B.V. All rights reserved.

Design and performance testing of a real-time PCR assay for sensitive and reliable direct quantification of Brettanomyces in wine.

PubMed

Tessonnière, H; Vidal, S; Barnavon, L; Alexandre, H; Remize, F

2009-02-28

Because the yeast Brettanomyces produces volatile phenols and acetic acid, it is responsible for wine spoilage. The uncontrolled accumulation of these molecules in wine leads to sensorial defects that compromise wine quality. The need for a rapid, specific, sensitive and reliable method to detect this spoilage yeast has increased over the last decade. All these requirements are met by real-time PCR. We here propose improvements of existing methods to enhance the robustness of the assay. Six different protocols to isolate DNA from a wine and three PCR mix compositions were tested, and the best method was selected. Insoluble PVPP addition during DNA extraction by a classical phenol:chloroform protocol succeeded in the relief of PCR inhibitors from wine. We developed an internal control which was efficient to avoid false negative results due to decreases in the efficiency of DNA isolation and/or amplification. The method was evaluated by an intra-laboratory study for its specificity, linearity, repeatability and reproducibility. A standard curve was established from 14 different wines artificially inoculated. The quantification limit was 31 cfu/mL.

Communications among elements of a space construction ensemble

NASA Technical Reports Server (NTRS)

Davis, Randal L.; Grasso, Christopher A.

1989-01-01

Space construction projects will require careful coordination between managers, designers, manufacturers, operators, astronauts, and robots with large volumes of information of varying resolution, timeliness, and accuracy flowing between the distributed participants over computer communications networks. Within the CSC Operations Branch, we are researching the requirements and options for such communications. Based on our work to date, we feel that communications standards being developed by the International Standards Organization, the CCITT, and other groups can be applied to space construction. We are currently studying in depth how such standards can be used to communicate with robots and automated construction equipment used in a space project. Specifically, we are looking at how the Manufacturing Automation Protocol (MAP) and the Manufacturing Message Specification (MMS), which tie together computers and machines in automated factories, might be applied to space construction projects. Together with our CSC industrial partner Computer Technology Associates, we are developing a MAP/MMS companion standard for space construction and we will produce software to allow the MAP/MMS protocol to be used in our CSC operations testbed.

Auto-Generated Semantic Processing Services

NASA Technical Reports Server (NTRS)

Davis, Rodney; Hupf, Greg

2009-01-01

Auto-Generated Semantic Processing (AGSP) Services is a suite of software tools for automated generation of other computer programs, denoted cross-platform semantic adapters, that support interoperability of computer-based communication systems that utilize a variety of both new and legacy communication software running in a variety of operating- system/computer-hardware combinations. AGSP has numerous potential uses in military, space-exploration, and other government applications as well as in commercial telecommunications. The cross-platform semantic adapters take advantage of common features of computer- based communication systems to enforce semantics, messaging protocols, and standards of processing of streams of binary data to ensure integrity of data and consistency of meaning among interoperating systems. The auto-generation aspect of AGSP Services reduces development time and effort by emphasizing specification and minimizing implementation: In effect, the design, building, and debugging of software for effecting conversions among complex communication protocols, custom device mappings, and unique data-manipulation algorithms is replaced with metadata specifications that map to an abstract platform-independent communications model. AGSP Services is modular and has been shown to be easily integrable into new and legacy NASA flight and ground communication systems.

Collecting and Storing Blood Samples From Patients With Cancer

ClinicalTrials.gov

2011-12-08

Brain and Central Nervous System Tumors; Chronic Myeloproliferative Disorders; Leukemia; Lymphoma; Lymphoproliferative Disorder; Multiple Myeloma and Plasma Cell Neoplasm; Myelodysplastic Syndromes; Myelodysplastic/Myeloproliferative Neoplasms; Nonmalignant Neoplasm; Unspecified Adult Solid Tumor, Protocol Specific; Unspecified Childhood Solid Tumor, Protocol Specific

Implementation of a 5-Minute Magnetic Resonance Imaging Screening Protocol for Prostate Cancer in Men With Elevated Prostate-Specific Antigen Before Biopsy.

PubMed

Weiss, Jakob; Martirosian, Petros; Notohamiprodjo, Mike; Kaufmann, Sascha; Othman, Ahmed E; Grosse, Ulrich; Nikolaou, Konstantin; Gatidis, Sergios

2018-03-01

The aims of this study were to establish a 5-minute magnetic resonance (MR) screening protocol for prostate cancer in men before biopsy and to evaluate effects on Prostate Imaging Reporting and Data System (PI-RADS) V2 scoring in comparison to a conventional, fully diagnostic multiparametric MR imaging (mpMRI) approach. Fifty-two patients with elevated prostate-specific antigen levels and without prior biopsy were prospectively included in this institutional review board-approved study. In all patients, an mpMRI protocol according to the PI-RADS recommendations was acquired on a 3 T MRI system. In addition, an accelerated diffusion-weighted imaging sequence was acquired using simultaneous multislice technique (DW-EPISMS). Two readers independently evaluated the images for the presence/absence of prostate cancer according to the PI-RADS criteria and for additional findings. In a first reading session, only the screening protocol consisting of axial T2-weighted and DW-EPISMS images was made available. In a subsequent reading session, the mpMRI protocol was assessed blinded to the results of the first reading, serving as reference standard. Both readers successfully established a final diagnosis according to the PI-RADS criteria in the screening and mpMRI protocol. Mean lesion size was 1.2 cm in the screening and 1.4 cm in the mpMRI protocol (P = 0.4) with 35% (18/52) of PI-RADS IV/V lesions. Diagnostic performance of the screening protocol was excellent with a sensitivity and specificity of 100% for both readers with no significant differences in comparison to the mpMRI standard (P = 1.0). In 3 patients, suspicious lymph nodes were reported as additional finding, which were equally detectable in the screening and mpMRI protocol. A 5-minute MR screening protocol for prostate cancer in men with elevated prostate-specific antigen levels before biopsy is applicable for clinical routine with similar diagnostic performance as the full diagnostic mpMRI approach.

IVOA Credential Delegation Protocol Version 1.0

NASA Astrophysics Data System (ADS)

Plante, Raymond; Graham, Matthew; Rixon, Guy; Taffoni, Giuliano; Plante, Raymond; Graham, Matthew

2010-02-01

The credential delegation protocol allows a client program to delegate a user's credentials to a service such that that service may make requests of other services in the name of that user. The protocol defines a REST service that works alongside other IVO services to enable such a delegation in a secure manner. In addition to defining the specifics of the service protocol, this document describes how a delegation service is registered in an IVOA registry along with the services it supports. The specification also explains how one can determine from a service registration that it requires the use of a supporting delegation service.

SpaceWire Protocol ID: What Does It Mean To You?

NASA Technical Reports Server (NTRS)

Rakow, Glenn; Schnurr, Richard; Gilley, Daniel; Parks, Steve

2006-01-01

Spacewire is becoming a popular solution for satellite high-speed data buses because it is a simple standard that provides great flexibility for a wide range of system requirements. It is simple in packet format and protocol, allowing users to easily tailor their implementation for their specific application. Some of the attractive aspects of Spacewire that make it easy to implement also make it hard for future reuse. Protocol reuse is difficult because Spacewire does not have a defined mechanism to communicate with the higher layers of the protocol stack. This has forced users of Spacewire to define unique packet formats and define how these packets are to be processed. Each mission writes their own Interface Control Document (ICD) and tailors Spacewire for their specific requirements making reuse difficult. Part of the reason for this habit may be because engineers typically optimize designs for their own requirements in the absence of a standard. This is an inefficient use of project resources and costs more to develop missions. A new packet format for Spacewire has been defined as a solution for this problem. This new packet format is a compliment to the Spacewire standard that will support protocol development upon Spacewire. The new packet definition does not replace the current packet structure, i.e., does not make the standard obsolete, but merely extends the standard for those who want to develop protocols over Spacewire. The Spacewire packet is defined with the first part being the Destination Address, which may be one or more bytes. This is followed by the packet cargo, which is user defined. The cargo is truncated with an End-Of-Packet (EOP) marker. This packet structure offers low packet overhead and allows the user to define how the contents are to be formatted. It also provides for many different addressing schemes, which provide flexibility in the system. This packet flexibility is typically an attractive part of the Spacewire. The new extended packet format adds one new field to the packet that greatly enhances the capability of Spacewire. This new field called the Protocol Identifier (ID) is used to identify the packet contents and the associated processing for the packet. This feature along with the restriction in the packet format that uses the Protocol ID, allows a deterministic method of decoding packets that was not before possible. The first part of the packet is still the Destination Address, which still conforms to the original standard but with one restriction. The restriction is that the first byte seen at the destination by the user needs to be a logical address, independent of the addressing scheme used. The second field is defined as the Protocol ID, which is usually one byte in length. The packet cargo (user defined) follows the Protocol ID. After the packet cargo is the EOP, which defines the end of packet. The value of the Protocol ID is assigned by the Spacewire working group and the protocol description published for others to use. The development of Protocols for Spacewire is currently the area of greatest activity by the Spacewire working group. The first protocol definition by the working group has been completed and is now in the process of formal standardization. There are many other protocols in development for missions that have not yet received formal Protocol ID assignment, but even if the protocols are not formally assigned a value, this effort will provide synergism for future developments.

Design preferences and cognitive styles: experimentation by automated website synthesis.

PubMed

Leung, Siu-Wai; Lee, John; Johnson, Chris; Robertson, David

2012-06-29

This article aims to demonstrate computational synthesis of Web-based experiments in undertaking experimentation on relationships among the participants' design preference, rationale, and cognitive test performance. The exemplified experiments were computationally synthesised, including the websites as materials, experiment protocols as methods, and cognitive tests as protocol modules. This work also exemplifies the use of a website synthesiser as an essential instrument enabling the participants to explore different possible designs, which were generated on the fly, before selection of preferred designs. The participants were given interactive tree and table generators so that they could explore some different ways of presenting causality information in tables and trees as the visualisation formats. The participants gave their preference ratings for the available designs, as well as their rationale (criteria) for their design decisions. The participants were also asked to take four cognitive tests, which focus on the aspects of visualisation and analogy-making. The relationships among preference ratings, rationale, and the results of cognitive tests were analysed by conservative non-parametric statistics including Wilcoxon test, Krustal-Wallis test, and Kendall correlation. In the test, 41 of the total 64 participants preferred graphical (tree-form) to tabular presentation. Despite the popular preference for graphical presentation, the given tabular presentation was generally rated to be easier than graphical presentation to interpret, especially by those who were scored lower in the visualization and analogy-making tests. This piece of evidence helps generate a hypothesis that design preferences are related to specific cognitive abilities. Without the use of computational synthesis, the experiment setup and scientific results would be impractical to obtain.

Strain-specific quantification of root colonization by plant growth promoting rhizobacteria Bacillus firmus I-1582 and Bacillus amyloliquefaciens QST713 in non-sterile soil and field conditions.

PubMed

Mendis, Hajeewaka C; Thomas, Varghese P; Schwientek, Patrick; Salamzade, Rauf; Chien, Jung-Ting; Waidyarathne, Pramuditha; Kloepper, Joseph; De La Fuente, Leonardo

2018-01-01

Bacillus amyloliquefaciens QST713 and B. firmus I-1582 are bacterial strains which are used as active ingredients of commercially-available soil application and seed treatment products Serenade® and VOTiVO®, respectively. These bacteria colonize plant roots promoting plant growth and offering protection against pathogens/pests. The objective of this study was to develop a qPCR protocol to quantitate the dynamics of root colonization by these two strains under field conditions. Primers and TaqMan® probes were designed based on genome comparisons of the two strains with publicly-available and unpublished bacterial genomes of the same species. An optimized qPCR protocol was developed to quantify bacterial colonization of corn roots after seed treatment. Treated corn seeds were planted in non-sterile soil in the greenhouse and grown for 28 days. Specific detection of bacteria was quantified weekly, and showed stable colonization between ~104-105 CFU/g during the experimental period for both bacteria, and the protocol detected as low as 103 CFU/g bacteria on roots. In a separate experiment, streptomycin-resistant QST713 and rifampicin-resistant I-1582 strains were used to compare dilution-plating on TSA with the newly developed qPCR method. Results also indicated that the presence of natural microflora and another inoculated strain does not affect root colonization of either one of these strains. The same qPCR protocol was used to quantitate root colonization by QST713 and I-1582 in two corn and two soybean varieties grown in the field. Both bacteria were quantitated up to two weeks after seeds were planted in the field and there were no significant differences in root colonization in either bacteria strain among varieties. Results presented here confirm that the developed qPCR protocol can be successfully used to understand dynamics of root colonization by these bacteria in plants growing in growth chamber, greenhouse and the field.

Detecting in situ copepod diet diversity using molecular technique: development of a copepod/symbiotic ciliate-excluding eukaryote-inclusive PCR protocol.

PubMed

Hu, Simin; Guo, Zhiling; Li, Tao; Carpenter, Edward J; Liu, Sheng; Lin, Senjie

2014-01-01

Knowledge of in situ copepod diet diversity is crucial for accurately describing pelagic food web structure but is challenging to achieve due to lack of an easily applicable methodology. To enable analysis with whole copepod-derived DNAs, we developed a copepod-excluding 18S rDNA-based PCR protocol. Although it is effective in depressing amplification of copepod 18S rDNA, its applicability to detect diverse eukaryotes in both mono- and mixed-species has not been demonstrated. Besides, the protocol suffers from the problem that sequences from symbiotic ciliates are overrepresented in the retrieved 18S rDNA libraries. In this study, we designed a blocking primer to make a combined primer set (copepod/symbiotic ciliate-excluding eukaryote-common: CEEC) to depress PCR amplification of symbiotic ciliate sequences while maximizing the range of eukaryotes amplified. We firstly examined the specificity and efficacy of CEEC by PCR-amplifying DNAs from 16 copepod species, 37 representative organisms that are potential prey of copepods and a natural microplankton sample, and then evaluated the efficiency in reconstructing diet composition by detecting the food of both lab-reared and field-collected copepods. Our results showed that the CEEC primer set can successfully amplify 18S rDNA from a wide range of isolated species and mixed-species samples while depressing amplification of that from copepod and targeted symbiotic ciliate, indicating the universality of CEEC in specifically detecting prey of copepods. All the predetermined food offered to copepods in the laboratory were successfully retrieved, suggesting that the CEEC-based protocol can accurately reconstruct the diets of copepods without interference of copepods and their associated ciliates present in the DNA samples. Our initial application to analyzing the food composition of field-collected copepods uncovered diverse prey species, including those currently known, and those that are unsuspected, as copepod prey. While testing is required, this protocol provides a useful strategy for depicting in situ dietary composition of copepods.

The Verification-based Analysis of Reliable Multicast Protocol

NASA Technical Reports Server (NTRS)

Wu, Yunqing

1996-01-01

Reliable Multicast Protocol (RMP) is a communication protocol that provides an atomic, totally ordered, reliable multicast service on top of unreliable IP Multicasting. In this paper, we develop formal models for R.W using existing automatic verification systems, and perform verification-based analysis on the formal RMP specifications. We also use the formal models of RW specifications to generate a test suite for conformance testing of the RMP implementation. Throughout the process of RMP development, we follow an iterative, interactive approach that emphasizes concurrent and parallel progress between the implementation and verification processes. Through this approach, we incorporate formal techniques into our development process, promote a common understanding for the protocol, increase the reliability of our software, and maintain high fidelity between the specifications of RMP and its implementation.

TraPy-MAC: Traffic Priority Aware Medium Access Control Protocol for Wireless Body Area Network.

PubMed

Ullah, Fasee; Abdullah, Abdul Hanan; Kaiwartya, Omprakash; Cao, Yue

2017-06-01

Recently, Wireless Body Area Network (WBAN) has witnessed significant attentions in research and product development due to the growing number of sensor-based applications in healthcare domain. Design of efficient and effective Medium Access Control (MAC) protocol is one of the fundamental research themes in WBAN. Static on-demand slot allocation to patient data is the main approach adopted in the design of MAC protocol in literature, without considering the type of patient data specifically the level of severity on patient data. This leads to the degradation of the performance of MAC protocols considering effectiveness and traffic adjustability in realistic medical environments. In this context, this paper proposes a Traffic Priority-Aware MAC (TraPy-MAC) protocol for WBAN. It classifies patient data into emergency and non-emergency categories based on the severity of patient data. The threshold value aided classification considers a number of parameters including type of sensor, body placement location, and data transmission time for allocating dedicated slots patient data. Emergency data are not required to carry out contention and slots are allocated by giving the due importance to threshold value of vital sign data. The contention for slots is made efficient in case of non-emergency data considering threshold value in slot allocation. Moreover, the slot allocation to emergency and non-emergency data are performed parallel resulting in performance gain in channel assignment. Two algorithms namely, Detection of Severity on Vital Sign data (DSVS), and ETS Slots allocation based on the Severity on Vital Sign (ETS-SVS) are developed for calculating threshold value and resolving the conflicts of channel assignment, respectively. Simulations are performed in ns2 and results are compared with the state-of-the-art MAC techniques. Analysis of results attests the benefit of TraPy-MAC in comparison with the state-of-the-art MAC in channel assignment in realistic medical environments.

A data acquisition and control system for high-speed gamma-ray tomography

NASA Astrophysics Data System (ADS)

Hjertaker, B. T.; Maad, R.; Schuster, E.; Almås, O. A.; Johansen, G. A.

2008-09-01

A data acquisition and control system (DACS) for high-speed gamma-ray tomography based on the USB (Universal Serial Bus) and Ethernet communication protocols has been designed and implemented. The high-speed gamma-ray tomograph comprises five 500 mCi 241Am gamma-ray sources, each at a principal energy of 59.5 keV, which corresponds to five detector modules, each consisting of 17 CdZnTe detectors. The DACS design is based on Microchip's PIC18F4550 and PIC18F4620 microcontrollers, which facilitates an USB 2.0 interface protocol and an Ethernet (IEEE 802.3) interface protocol, respectively. By implementing the USB- and Ethernet-based DACS, a sufficiently high data acquisition rate is obtained and no dedicated hardware installation is required for the data acquisition computer, assuming that it is already equipped with a standard USB and/or Ethernet port. The API (Application Programming Interface) for the DACS is founded on the National Instrument's LabVIEW® graphical development tool, which provides a simple and robust foundation for further application software developments for the tomograph. The data acquisition interval, i.e. the integration time, of the high-speed gamma-ray tomograph is user selectable and is a function of the statistical measurement accuracy required for the specific application. The bandwidth of the DACS is 85 kBytes s-1 for the USB communication protocol and 28 kBytes s-1 for the Ethernet protocol. When using the iterative least square technique reconstruction algorithm with a 1 ms integration time, the USB-based DACS provides an online image update rate of 38 Hz, i.e. 38 frames per second, whereas 31 Hz for the Ethernet-based DACS. The off-line image update rate (storage to disk) for the USB-based DACS is 278 Hz using a 1 ms integration time. Initial characterization of the high-speed gamma-ray tomograph using the DACS on polypropylene phantoms is presented in the paper.

Computational design of protein antigens that interact with the CDR H3 loop of HIV broadly neutralizing antibody 2F5.

PubMed

Azoitei, M L; Ban, Y A; Kalyuzhny, O; Guenaga, J; Schroeter, A; Porter, J; Wyatt, R; Schief, William R

2014-10-01

Rational design of proteins with novel binding specificities and increased affinity is one of the major goals of computational protein design. Epitope-scaffolds are a new class of antigens engineered by transplanting viral epitopes of predefined structure to protein scaffolds, or by building protein scaffolds around such epitopes. Epitope-scaffolds are of interest as vaccine components to attempt to elicit neutralizing antibodies targeting the specified epitope. In this study we developed a new computational protocol, MultiGraft Interface, that transplants epitopes but also designs additional scaffold features outside the epitope to enhance antibody-binding specificity and potentially influence the specificity of elicited antibodies. We employed MultiGraft Interface to engineer novel epitope-scaffolds that display the known epitope of human immunodeficiency virus 1 (HIV-1) neutralizing antibody 2F5 and that also interact with the functionally important CDR H3 antibody loop. MultiGraft Interface generated an epitope-scaffold that bound 2F5 with subnanomolar affinity (K(D) = 400 pM) and that interacted with the antibody CDR H3 loop through computationally designed contacts. Substantial structural modifications were necessary to engineer this antigen, with the 2F5 epitope replacing a helix in the native scaffold and with 15% of the native scaffold sequence being modified in the design stage. This epitope-scaffold represents a successful example of rational protein backbone engineering and protein-protein interface design and could prove useful in the field of HIV vaccine design. MultiGraft Interface can be generally applied to engineer novel binding partners with altered specificity and optimized affinity. © 2014 Wiley Periodicals, Inc.

The Design of Finite State Machine for Asynchronous Replication Protocol

NASA Astrophysics Data System (ADS)

Wang, Yanlong; Li, Zhanhuai; Lin, Wei; Hei, Minglei; Hao, Jianhua

Data replication is a key way to design a disaster tolerance system and to achieve reliability and availability. It is difficult for a replication protocol to deal with the diverse and complex environment. This means that data is less well replicated than it ought to be. To reduce data loss and to optimize replication protocols, we (1) present a finite state machine, (2) run it to manage an asynchronous replication protocol and (3) report a simple evaluation of the asynchronous replication protocol based on our state machine. It's proved that our state machine is applicable to guarantee the asynchronous replication protocol running in the proper state to the largest extent in the event of various possible events. It also can helpful to build up replication-based disaster tolerance systems to ensure the business continuity.

Long-Term Functional Side-Effects of Stimulants and Sedatives in Drosophila melanogaster

PubMed Central

Matsagas, Kennedy; Lim, David B.; Horwitz, Marc; Rizza, Cristina L.; Mueller, Laurence D.; Villeponteau, Bryant; Rose, Michael R.

2009-01-01

Background Small invertebrate animals, such as nematodes and fruit flies, are increasingly being used to test candidate drugs both for specific therapeutic purposes and for long-term health effects. Some of the protocols used in these experiments feature such experimental design features as lifelong virginity and very low densities. By contrast, the ability of both fruit flies and nematodes to resist stress is frequently correlated with their longevity and other functional measures, suggesting that low-stress assays are not necessarily the only useful protocol for testing the long-term effects of drugs. Methodology/Principal Findings Here we report an alternative protocol for fruit fly drug-testing that maximizes reproductive opportunities and other types of interaction, with moderately high population densities. We validate this protocol using two types of experimental tests: 1. We show that this protocol detects previously well-established genetic differences between outbred fruit fly populations. 2. We show that this protocol is able to distinguish among the long-term effects of similar types of drugs within two broad categories, stimulants and tranquilizers. Conclusions Large-scale fly drug testing can be conducted using mixed-sex high-density cage assays. We find that the commonly-used stimulants caffeine and theobromine differ dramatically in their chronic functional effects, theobromine being more benign. Likewise, we find that two generic pharmaceutical tranquilizers, lithium carbonate and valproic acid, differ dramatically in their chronic effects, lithium being more benign. However, these findings do not necessarily apply to human subjects, and we thus do not recommend the use of any one substance over any other. PMID:19668379

A Protocol Specification-Based Intrusion Detection System for VoIP and Its Evaluation

NASA Astrophysics Data System (ADS)

Phit, Thyda; Abe, Kôki

We propose an architecture of Intrusion Detection System (IDS) for VoIP using a protocol specification-based detection method to monitor the network traffics and alert administrator for further analysis of and response to suspicious activities. The protocol behaviors and their interactions are described by state machines. Traffic that behaves differently from the standard specifications are considered to be suspicious. The IDS has been implemented and simulated using OPNET Modeler, and verified to detect attacks. It was found that our system can detect typical attacks within a reasonable amount of delay time.

The Network Protocol Analysis Technique in Snort

NASA Astrophysics Data System (ADS)

Wu, Qing-Xiu

Network protocol analysis is a network sniffer to capture data for further analysis and understanding of the technical means necessary packets. Network sniffing is intercepted by packet assembly binary format of the original message content. In order to obtain the information contained. Required based on TCP / IP protocol stack protocol specification. Again to restore the data packets at protocol format and content in each protocol layer. Actual data transferred, as well as the application tier.

Linked Orders Improve Safety in Scheduling and Administration of Chemotherapeutic Agents

PubMed Central

Whipple, Nancy; Boulware, Joy; Danca, Kala; Boyarin, Kirill; Ginsberg, Eliot; Poon, Eric; Sweet, Micheal; Schade, Sue; Rogala, Jennifer

2010-01-01

The pharmacologic treatment for cancer must adhere to complex, finely orchestrated treatment plans, including not only chemotherapy medications, but pre/post-hydration, anti-emetics, anti-anxiety, and other medications that are given before, during and after chemotherapy doses. The treatment plans specify the medications and dictate precise dosing, frequency, and timing. This is a challenge to most Computerized Physician Order Entry (CPOE), Pharmacy and Electronic Medication Administration record (eMAR) Systems. Medications are scheduled on specific dates, referred to as chemo days, from the onset of the treatment, and precisely timed on the designated chemo day. For patients enrolled in research protocols, the adherence to the defined schedule takes on additional import, since variation is a violation of the protocol. If the oncologist determines that medications must be administered outside the defined constraints, the patient must be un-enrolled from the protocol and the course of therapy is re-written. Pharmacy and eMAR systems utilized in processing chemotherapy medications must be able to support the intricate relationships between each drug defined in the treatment plans. PMID:21347104

Structured Counseling for Auditory Dynamic Range Expansion.

PubMed

Gold, Susan L; Formby, Craig

2017-02-01

A structured counseling protocol is described that, when combined with low-level broadband sound therapy from bilateral sound generators, offers audiologists a new tool for facilitating the expansion of the auditory dynamic range (DR) for loudness. The protocol and its content are specifically designed to address and treat problems that impact hearing-impaired persons who, due to their reduced DRs, may be limited in the use and benefit of amplified sound from hearing aids. The reduced DRs may result from elevated audiometric thresholds and/or reduced sound tolerance as documented by lower-than-normal loudness discomfort levels (LDLs). Accordingly, the counseling protocol is appropriate for challenging and difficult-to-fit persons with sensorineural hearing losses who experience loudness recruitment or hyperacusis. Positive treatment outcomes for individuals with the former and latter conditions are highlighted in this issue by incremental shifts (improvements) in LDL and/or categorical loudness judgments, associated reduced complaints of sound intolerance, and functional improvements in daily communication, speech understanding, and quality of life leading to improved hearing aid benefit, satisfaction, and aided sound quality, posttreatment.

Wireless medical sensor networks: design requirements and enabling technologies.

PubMed

Vallejos de Schatz, Cecilia H; Medeiros, Henry Ponti; Schneider, Fabio K; Abatti, Paulo J

2012-06-01

This article analyzes wireless communication protocols that could be used in healthcare environments (e.g., hospitals and small clinics) to transfer real-time medical information obtained from noninvasive sensors. For this purpose the features of the three currently most widely used protocols-namely, Bluetooth(®) (IEEE 802.15.1), ZigBee (IEEE 802.15.4), and Wi-Fi (IEEE 802.11)-are evaluated and compared. The important features under consideration include data bandwidth, frequency band, maximum transmission distance, encryption and authentication methods, power consumption, and current applications. In addition, an overview of network requirements with respect to medical sensor features, patient safety and patient data privacy, quality of service, and interoperability between other sensors is briefly presented. Sensor power consumption is also discussed because it is considered one of the main obstacles for wider adoption of wireless networks in medical applications. The outcome of this assessment will be a useful tool in the hands of biomedical engineering researchers. It will provide parameters to select the most effective combination of protocols to implement a specific wireless network of noninvasive medical sensors to monitor patients remotely in the hospital or at home.

Structured Counseling for Auditory Dynamic Range Expansion

PubMed Central

Gold, Susan L.; Formby, Craig

2017-01-01

A structured counseling protocol is described that, when combined with low-level broadband sound therapy from bilateral sound generators, offers audiologists a new tool for facilitating the expansion of the auditory dynamic range (DR) for loudness. The protocol and its content are specifically designed to address and treat problems that impact hearing-impaired persons who, due to their reduced DRs, may be limited in the use and benefit of amplified sound from hearing aids. The reduced DRs may result from elevated audiometric thresholds and/or reduced sound tolerance as documented by lower-than-normal loudness discomfort levels (LDLs). Accordingly, the counseling protocol is appropriate for challenging and difficult-to-fit persons with sensorineural hearing losses who experience loudness recruitment or hyperacusis. Positive treatment outcomes for individuals with the former and latter conditions are highlighted in this issue by incremental shifts (improvements) in LDL and/or categorical loudness judgments, associated reduced complaints of sound intolerance, and functional improvements in daily communication, speech understanding, and quality of life leading to improved hearing aid benefit, satisfaction, and aided sound quality, posttreatment. PMID:28286367

Effects of the TCARE® intervention on caregiver burden and depressive symptoms: preliminary findings from a randomized controlled study.

PubMed

Montgomery, Rhonda J V; Kwak, Jung; Kosloski, Karl; O'Connell Valuch, Katharine

2011-09-01

We examined the effects of a manualized care management protocol specifically designed for care managers working with caregivers, the Tailored Caregiver Assessment and Referral® (TCARE®) protocol, on caregiver identity discrepancy, burden, and depressive symptoms. Preliminary data from a longitudinal, randomized, controlled intervention study with 266 family caregivers served by 52 care managers in 4 states were analyzed using repeated measures random effects regression procedures. Caregivers in the intervention and control groups were repeatedly assessed for up to 9 months on caregiver identity discrepancy, 3 areas of caregiving burden-objective, relationship, and stress burdens; depression; and intention for nursing home placement. We found significant group by time interaction effects for caregiver identity discrepancy, relationship burden, stress burden, depression, and intention for nursing home placement. Caregivers in the intervention group experienced significant improvement on these measures, whereas caregivers in the control group worsened on these measures over time. The preliminary findings provide strong support for effectiveness of the TCARE® protocol on improving caregiver well-being and mental health outcomes.

Effects of the TCARE® Intervention on Caregiver Burden and Depressive Symptoms: Preliminary Findings From a Randomized Controlled Study

PubMed Central

Kwak, Jung; Kosloski, Karl; O’Connell Valuch, Katharine

2011-01-01

Objectives. We examined the effects of a manualized care management protocol specifically designed for care managers working with caregivers, the Tailored Caregiver Assessment and Referral® (TCARE®) protocol, on caregiver identity discrepancy, burden, and depressive symptoms. Methods. Preliminary data from a longitudinal, randomized, controlled intervention study with 266 family caregivers served by 52 care managers in 4 states were analyzed using repeated measures random effects regression procedures. Caregivers in the intervention and control groups were repeatedly assessed for up to 9 months on caregiver identity discrepancy, 3 areas of caregiving burden—objective, relationship, and stress burdens; depression; and intention for nursing home placement. Results. We found significant group by time interaction effects for caregiver identity discrepancy, relationship burden, stress burden, depression, and intention for nursing home placement. Caregivers in the intervention group experienced significant improvement on these measures, whereas caregivers in the control group worsened on these measures over time. Discussion. The preliminary findings provide strong support for effectiveness of the TCARE® protocol on improving caregiver well-being and mental health outcomes. PMID:21840840

Determination of recombination and polarity correction factors, kS and kP, for small cylindrical ionization chambers PTW 31021 and PTW 31022 in pulsed filtered and unfiltered beams.

PubMed

Bruggmoser, Gregor; Saum, Rainer; Kranzer, Rafael

2018-01-12

The aim of this technical communication is to provide correction factors for recombination and polarity effect for two new ionization chambers PTW PinPoint 3D (type 31022) and PTW Semiflex 3D (type 31021). The correction factors provided are for the (based on the) German DIN 6800-2 dosimetry protocol and the AAPM TG51 protocol. The measurements were made in filtered and unfiltered high-energy photon beams in a water equivalent phantom at maximum depth of the PDD and a field size on the surface of 10cm×10cm. The design of the new chamber types leads to an ion collection efficiency and a polarity effect that are well within the specifications requested by pertinent dosimetry protocols including the addendum of TG-51. It was confirmed that the recombination effect of both chambers mainly depends on dose per pulse and is independent of the filtration of the photon beam. Copyright © 2018. Published by Elsevier GmbH.

Algorithm for planning a double-jaw orthognathic surgery using a computer-aided surgical simulation (CASS) protocol. Part 1: planning sequence.

PubMed

Xia, J J; Gateno, J; Teichgraeber, J F; Yuan, P; Chen, K-C; Li, J; Zhang, X; Tang, Z; Alfi, D M

2015-12-01

The success of craniomaxillofacial (CMF) surgery depends not only on the surgical techniques, but also on an accurate surgical plan. The adoption of computer-aided surgical simulation (CASS) has created a paradigm shift in surgical planning. However, planning an orthognathic operation using CASS differs fundamentally from planning using traditional methods. With this in mind, the Surgical Planning Laboratory of Houston Methodist Research Institute has developed a CASS protocol designed specifically for orthognathic surgery. The purpose of this article is to present an algorithm using virtual tools for planning a double-jaw orthognathic operation. This paper will serve as an operation manual for surgeons wanting to incorporate CASS into their clinical practice. Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Crispr-mediated Gene Targeting of Human Induced Pluripotent Stem Cells.

PubMed

Byrne, Susan M; Church, George M

2015-01-01

CRISPR/Cas9 nuclease systems can create double-stranded DNA breaks at specific sequences to efficiently and precisely disrupt, excise, mutate, insert, or replace genes. However, human embryonic stem or induced pluripotent stem cells (iPSCs) are more difficult to transfect and less resilient to DNA damage than immortalized tumor cell lines. Here, we describe an optimized protocol for genome engineering of human iPSCs using a simple transient transfection of plasmids and/or single-stranded oligonucleotides. With this protocol, we achieve transfection efficiencies greater than 60%, with gene disruption efficiencies from 1-25% and gene insertion/replacement efficiencies from 0.5-10% without any further selection or enrichment steps. We also describe how to design and assess optimal sgRNA target sites and donor targeting vectors; cloning individual iPSC by single cell FACS sorting, and genotyping successfully edited cells.

Patient-derived Models of Human Breast Cancer: Protocols for In vitro and In vivo Applications in Tumor Biology and Translational Medicine

PubMed Central

DeRose, Yoko S.; Gligorich, Keith M.; Wang, Guoying; Georgelas, Ann; Bowman, Paulette; Courdy, Samir J.; Welm, Alana L.; Welm, Bryan E.

2013-01-01

Research models that replicate the diverse genetic and molecular landscape of breast cancer are critical for developing the next generation therapeutic entities that can target specific cancer subtypes. Patient-derived tumorgrafts, generated by transplanting primary human tumor samples into immune-compromised mice, are a valuable method to model the clinical diversity of breast cancer in mice, and are a potential resource in personalized medicine. Primary tumorgrafts also enable in vivo testing of therapeutics and make possible the use of patient cancer tissue for in vitro screens. Described in this unit are a variety of protocols including tissue collection, biospecimen tracking, tissue processing, transplantation, and 3-dimensional culturing of xenografted tissue, that enable use of bona fide uncultured human tissue in designing and validating cancer therapies. PMID:23456611

Best Practices and Testing Protocols for Benchmarking ORR Activities of Fuel Cell Electrocatalysts Using Rotating Disk Electrode

DOE PAGES

Kocha, Shyam S.; Shinozaki, Kazuma; Zack, Jason W.; ...

2017-05-02

Thin-film-rotating disk electrodes (TF-RDEs) are the half-cell electrochemical system of choice for rapid screening of oxygen reduction reaction (ORR) activity of novel Pt supported on carbon black supports (Pt/C) electrocatalysts. It has been shown that the magnitude of the measured ORR activity and reproducibility are highly dependent on the system cleanliness, evaluation protocols, and operating conditions as well as ink formulation, composition, film drying, and the resultant film thickness and uniformity. Accurate benchmarks of baseline Pt/C catalysts evaluated using standardized protocols and best practices are necessary to expedite ultra-low-platinum group metal (PGM) catalyst development that is crucial for the imminentmore » commercialization of fuel cell vehicles. We report results of evaluation in three independent laboratories of Pt/C electrocatalysts provided by commercial fuel cell catalyst manufacturers (Johnson Matthey, Umicore, Tanaka Kikinzoku Kogyo - TKK). The studies were conducted using identical evaluation protocols/ink formulation/film fabrication albeit employing unique electrochemical cell designs specific to each laboratory. Furthermore, the ORR activities reported in this work provide a baseline and criteria for selection and scale-up of novel high activity ORR electrocatalysts for implementation in proton exchange membrane fuel cells (PEMFCs).« less

Relative Importance of Different Water Categories as Sources of N-Nitrosamine Precursors.

PubMed

Zeng, Teng; Glover, Caitlin M; Marti, Erica J; Woods-Chabane, Gwen C; Karanfil, Tanju; Mitch, William A; Dickenson, Eric R V

2016-12-20

A comparison of loadings of N-nitrosamines and their precursors from different source water categories is needed to design effective source water blending strategies. Previous research using Formation Potential (FP) chloramination protocols (high dose and prolonged contact times) raised concerns about precursor loadings from various source water categories, but differences in the protocols employed rendered comparisons difficult. In this study, we applied Uniform Formation Condition (UFC) chloramination and ozonation protocols mimicking typical disinfection practice to compare loadings of ambient specific and total N-nitrosamines as well as chloramine-reactive and ozone-reactive precursors in 47 samples, including 6 pristine headwaters, 16 eutrophic waters, 4 agricultural runoff samples, 9 stormwater runoff samples, and 12 municipal wastewater effluents. N-Nitrosodimethylamine (NDMA) formation from UFC and FP chloramination protocols did not correlate, with NDMA FP often being significant in samples where no NDMA formed under UFC conditions. N-Nitrosamines and their precursors were negligible in pristine headwaters. Conventional, and to a lesser degree, nutrient removal wastewater effluents were the dominant source of NDMA and its chloramine- and ozone-reactive precursors. While wastewater effluents were dominant sources of TONO and their precursors, algal blooms, and to a lesser degree agricultural or stormwater runoff, could be important where they affect a major fraction of the water supply.

METHOD FOR MICRORNA ISOLATION FROM CLINICAL SERUM SAMPLES

PubMed Central

Li, Yu; Kowdley, Kris V.

2012-01-01

MicroRNAs are a group of intracellular non-coding RNA molecules that have been implicated in a variety of human diseases. Due to their high stability in blood, microRNAs released into circulation could be potentially utilized as non-invasive biomarkers for diagnosis or prognosis. Current microRNA isolation protocols are specifically designed for solid tissues and are impractical for biomarker development utilizing small-volume serum samples on a large scale. Thus, a protocol for microRNA isolation from serum is needed to accommodate these conditions in biomarker development. To establish such a protocol, we developed a simplified approach to normalize sample input by using single synthetic spike-in microRNA. We evaluated three commonly used commercial microRNA isolation kits for the best performance by comparing RNA quality and yield. The manufacturer’s protocol was further modified to improve the microRNA yield from 200 μL of human serum. MicroRNAs isolated from a large set of clinical serum samples were tested on the miRCURY LNA real-time PCR panel and confirmed to be suitable for high-throughput microRNA profiling. In conclusion, we have established a proven method for microRNA isolation from clinical serum samples suitable for microRNA biomarker development. PMID:22982505

Best Practices and Testing Protocols for Benchmarking ORR Activities of Fuel Cell Electrocatalysts Using Rotating Disk Electrode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kocha, Shyam S.; Shinozaki, Kazuma; Zack, Jason W.

Abstract Thin-film-rotating disk electrodes (TF-RDEs) are the half-cell electrochemical system of choice for rapid screening of oxygen reduction reaction (ORR) activity of novel Pt supported on carbon black supports (Pt/C) electrocatalysts. It has been shown that the magnitude of the measured ORR activity and reproducibility are highly dependent on the system cleanliness, evaluation protocols, and operating conditions as well as ink formulation, composition, film drying, and the resultant film thickness and uniformity. Accurate benchmarks of baseline Pt/C catalysts evaluated using standardized protocols and best practices are necessary to expedite ultra-low-platinum group metal (PGM) catalyst development that is crucial for themore » imminent commercialization of fuel cell vehicles. We report results of evaluation in three independent laboratories of Pt/C electrocatalysts provided by commercial fuel cell catalyst manufacturers (Johnson Matthey, Umicore, Tanaka Kikinzoku Kogyo—TKK). The studies were conducted using identical evaluation protocols/ink formulation/film fabrication albeit employing unique electrochemical cell designs specific to each laboratory. The ORR activities reported in this work provide a baseline and criteria for selection and scale-up of novel high activity ORR electrocatalysts for implementation in proton exchange membrane fuel cells (PEMFCs).« less

Best Practices and Testing Protocols for Benchmarking ORR Activities of Fuel Cell Electrocatalysts Using Rotating Disk Electrode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kocha, Shyam S.; Shinozaki, Kazuma; Zack, Jason W.

Thin-film-rotating disk electrodes (TF-RDEs) are the half-cell electrochemical system of choice for rapid screening of oxygen reduction reaction (ORR) activity of novel Pt supported on carbon black supports (Pt/C) electrocatalysts. It has been shown that the magnitude of the measured ORR activity and reproducibility are highly dependent on the system cleanliness, evaluation protocols, and operating conditions as well as ink formulation, composition, film drying, and the resultant film thickness and uniformity. Accurate benchmarks of baseline Pt/C catalysts evaluated using standardized protocols and best practices are necessary to expedite ultra-low-platinum group metal (PGM) catalyst development that is crucial for the imminentmore » commercialization of fuel cell vehicles. We report results of evaluation in three independent laboratories of Pt/C electrocatalysts provided by commercial fuel cell catalyst manufacturers (Johnson Matthey, Umicore, Tanaka Kikinzoku Kogyo - TKK). The studies were conducted using identical evaluation protocols/ink formulation/film fabrication albeit employing unique electrochemical cell designs specific to each laboratory. Furthermore, the ORR activities reported in this work provide a baseline and criteria for selection and scale-up of novel high activity ORR electrocatalysts for implementation in proton exchange membrane fuel cells (PEMFCs).« less

Analytical platform for metabolome analysis of microbial cells using methyl chloroformate derivatization followed by gas chromatography-mass spectrometry.

PubMed

Smart, Kathleen F; Aggio, Raphael B M; Van Houtte, Jeremy R; Villas-Bôas, Silas G

2010-09-01

This protocol describes an analytical platform for the analysis of intra- and extracellular metabolites of microbial cells (yeast, filamentous fungi and bacteria) using gas chromatography-mass spectrometry (GC-MS). The protocol is subdivided into sampling, sample preparation, chemical derivatization of metabolites, GC-MS analysis and data processing and analysis. This protocol uses two robust quenching methods for microbial cultures, the first of which, cold glycerol-saline quenching, causes reduced leakage of intracellular metabolites, thus allowing a more reliable separation of intra- and extracellular metabolites with simultaneous stopping of cell metabolism. The second, fast filtration, is specifically designed for quenching filamentous micro-organisms. These sampling techniques are combined with an easy sample-preparation procedure and a fast chemical derivatization reaction using methyl chloroformate. This reaction takes place at room temperature, in aqueous medium, and is less prone to matrix effect compared with other derivatizations. This protocol takes an average of 10 d to complete and enables the simultaneous analysis of hundreds of metabolites from the central carbon metabolism (amino and nonamino organic acids, phosphorylated organic acids and fatty acid intermediates) using an in-house MS library and a data analysis pipeline consisting of two free software programs (Automated Mass Deconvolution and Identification System (AMDIS) and R).

A Web Resource for Standardized Benchmark Datasets, Metrics, and Rosetta Protocols for Macromolecular Modeling and Design.

PubMed

Ó Conchúir, Shane; Barlow, Kyle A; Pache, Roland A; Ollikainen, Noah; Kundert, Kale; O'Meara, Matthew J; Smith, Colin A; Kortemme, Tanja

2015-01-01

The development and validation of computational macromolecular modeling and design methods depend on suitable benchmark datasets and informative metrics for comparing protocols. In addition, if a method is intended to be adopted broadly in diverse biological applications, there needs to be information on appropriate parameters for each protocol, as well as metrics describing the expected accuracy compared to experimental data. In certain disciplines, there exist established benchmarks and public resources where experts in a particular methodology are encouraged to supply their most efficient implementation of each particular benchmark. We aim to provide such a resource for protocols in macromolecular modeling and design. We present a freely accessible web resource (https://kortemmelab.ucsf.edu/benchmarks) to guide the development of protocols for protein modeling and design. The site provides benchmark datasets and metrics to compare the performance of a variety of modeling protocols using different computational sampling methods and energy functions, providing a "best practice" set of parameters for each method. Each benchmark has an associated downloadable benchmark capture archive containing the input files, analysis scripts, and tutorials for running the benchmark. The captures may be run with any suitable modeling method; we supply command lines for running the benchmarks using the Rosetta software suite. We have compiled initial benchmarks for the resource spanning three key areas: prediction of energetic effects of mutations, protein design, and protein structure prediction, each with associated state-of-the-art modeling protocols. With the help of the wider macromolecular modeling community, we hope to expand the variety of benchmarks included on the website and continue to evaluate new iterations of current methods as they become available.

A Long-Distance RF-Powered Sensor Node with Adaptive Power Management for IoT Applications.

PubMed

Pizzotti, Matteo; Perilli, Luca; Del Prete, Massimo; Fabbri, Davide; Canegallo, Roberto; Dini, Michele; Masotti, Diego; Costanzo, Alessandra; Franchi Scarselli, Eleonora; Romani, Aldo

2017-07-28

We present a self-sustained battery-less multi-sensor platform with RF harvesting capability down to -17 dBm and implementing a standard DASH7 wireless communication interface. The node operates at distances up to 17 m from a 2 W UHF carrier. RF power transfer allows operation when common energy scavenging sources (e.g., sun, heat, etc.) are not available, while the DASH7 communication protocol makes it fully compatible with a standard IoT infrastructure. An optimized energy-harvesting module has been designed, including a rectifying antenna (rectenna) and an integrated nano-power DC/DC converter performing maximum-power-point-tracking (MPPT). A nonlinear/electromagnetic co-design procedure is adopted to design the rectenna, which is optimized to operate at ultra-low power levels. An ultra-low power microcontroller controls on-board sensors and wireless protocol, to adapt the power consumption to the available detected power by changing wake-up policies. As a result, adaptive behavior can be observed in the designed platform, to the extent that the transmission data rate is dynamically determined by RF power. Among the novel features of the system, we highlight the use of nano-power energy harvesting, the implementation of specific hardware/software wake-up policies, optimized algorithms for best sampling rate implementation, and adaptive behavior by the node based on the power received.

A Long-Distance RF-Powered Sensor Node with Adaptive Power Management for IoT Applications

PubMed Central

del Prete, Massimo; Fabbri, Davide; Canegallo, Roberto; Dini, Michele; Costanzo, Alessandra

2017-01-01

We present a self-sustained battery-less multi-sensor platform with RF harvesting capability down to −17 dBm and implementing a standard DASH7 wireless communication interface. The node operates at distances up to 17 m from a 2 W UHF carrier. RF power transfer allows operation when common energy scavenging sources (e.g., sun, heat, etc.) are not available, while the DASH7 communication protocol makes it fully compatible with a standard IoT infrastructure. An optimized energy-harvesting module has been designed, including a rectifying antenna (rectenna) and an integrated nano-power DC/DC converter performing maximum-power-point-tracking (MPPT). A nonlinear/electromagnetic co-design procedure is adopted to design the rectenna, which is optimized to operate at ultra-low power levels. An ultra-low power microcontroller controls on-board sensors and wireless protocol, to adapt the power consumption to the available detected power by changing wake-up policies. As a result, adaptive behavior can be observed in the designed platform, to the extent that the transmission data rate is dynamically determined by RF power. Among the novel features of the system, we highlight the use of nano-power energy harvesting, the implementation of specific hardware/software wake-up policies, optimized algorithms for best sampling rate implementation, and adaptive behavior by the node based on the power received. PMID:28788084

Patient-Reported Outcome (PRO) Assessment in Clinical Trials: A Systematic Review of Guidance for Trial Protocol Writers

PubMed Central

Calvert, Melanie; Kyte, Derek; Duffy, Helen; Gheorghe, Adrian; Mercieca-Bebber, Rebecca; Ives, Jonathan; Draper, Heather; Brundage, Michael; Blazeby, Jane; King, Madeleine

2014-01-01

Background Evidence suggests there are inconsistencies in patient-reported outcome (PRO) assessment and reporting in clinical trials, which may limit the use of these data to inform patient care. For trials with a PRO endpoint, routine inclusion of key PRO information in the protocol may help improve trial conduct and the reporting and appraisal of PRO results; however, it is currently unclear exactly what PRO-specific information should be included. The aim of this review was to summarize the current PRO-specific guidance for clinical trial protocol developers. Methods and Findings We searched the MEDLINE, EMBASE, CINHAL and Cochrane Library databases (inception to February 2013) for PRO-specific guidance regarding trial protocol development. Further guidance documents were identified via Google, Google scholar, requests to members of the UK Clinical Research Collaboration registered clinical trials units and international experts. Two independent investigators undertook title/abstract screening, full text review and data extraction, with a third involved in the event of disagreement. 21,175 citations were screened and 54 met the inclusion criteria. Guidance documents were difficult to access: electronic database searches identified just 8 documents, with the remaining 46 sourced elsewhere (5 from citation tracking, 27 from hand searching, 7 from the grey literature review and 7 from experts). 162 unique PRO-specific protocol recommendations were extracted from included documents. A further 10 PRO recommendations were identified relating to supporting trial documentation. Only 5/162 (3%) recommendations appeared in ≥50% of guidance documents reviewed, indicating a lack of consistency. Conclusions PRO-specific protocol guidelines were difficult to access, lacked consistency and may be challenging to implement in practice. There is a need to develop easily accessible consensus-driven PRO protocol guidance. Guidance should be aimed at ensuring key PRO information is routinely included in appropriate trial protocols, in order to facilitate rigorous collection/reporting of PRO data, to effectively inform patient care. PMID:25333995

Passive fMRI mapping of language function for pediatric epilepsy surgical planning: validation using Wada, ECS, and FMAER.

PubMed

Suarez, Ralph O; Taimouri, Vahid; Boyer, Katrina; Vega, Clemente; Rotenberg, Alexander; Madsen, Joseph R; Loddenkemper, Tobias; Duffy, Frank H; Prabhu, Sanjay P; Warfield, Simon K

2014-12-01

In this study we validate passive language fMRI protocols designed for clinical application in pediatric epilepsy surgical planning as they do not require overt participation from patients. We introduced a set of quality checks that assess reliability of noninvasive fMRI mappings utilized for clinical purposes. We initially compared two fMRI language mapping paradigms, one active in nature (requiring participation from the patient) and the other passive in nature (requiring no participation from the patient). Group-level analysis in a healthy control cohort demonstrated similar activation of the putative language centers of the brain in the inferior frontal (IFG) and temporoparietal (TPG) regions. Additionally, we showed that passive language fMRI produced more left-lateralized activation in TPG (LI=+0.45) compared to the active task; with similarly robust left-lateralized IFG (LI=+0.24) activations using the passive task. We validated our recommended fMRI mapping protocols in a cohort of 15 pediatric epilepsy patients by direct comparison against the invasive clinical gold-standards. We found that language-specific TPG activation by fMRI agreed to within 9.2mm to subdural localizations by invasive functional mapping in the same patients, and language dominance by fMRI agreed with Wada test results at 80% congruency in TPG and 73% congruency in IFG. Lastly, we tested the recommended passive language fMRI protocols in a cohort of very young patients and confirmed reliable language-specific activation patterns in that challenging cohort. We concluded that language activation maps can be reliably achieved using the passive language fMRI protocols we proposed even in very young (average 7.5 years old) or sedated pediatric epilepsy patients. Copyright © 2014 Elsevier B.V. All rights reserved.

Internet-Protocol-Based Satellite Bus Architecture Designed

NASA Technical Reports Server (NTRS)

Slywczak, Richard A.

2004-01-01

NASA is designing future complex satellite missions ranging from single satellites and constellations to space networks and sensor webs. These missions require more interoperability, autonomy, and coordination than previous missions; in addition, a desire exists to have scientists retrieve data directly from the satellite rather than a central distribution source. To meet these goals, NASA has been studying the possibility of extending the Transmission Control Protocol/Internet Protocol (TCP/IP) suite for spacebased applications.

Integration of Molecular Dynamics Based Predictions into the Optimization of De Novo Protein Designs: Limitations and Benefits.

PubMed

Carvalho, Henrique F; Barbosa, Arménio J M; Roque, Ana C A; Iranzo, Olga; Branco, Ricardo J F

2017-01-01

Recent advances in de novo protein design have gained considerable insight from the intrinsic dynamics of proteins, based on the integration of molecular dynamics simulations protocols on the state-of-the-art de novo protein design protocols used nowadays. With this protocol we illustrate how to set up and run a molecular dynamics simulation followed by a functional protein dynamics analysis. New users will be introduced to some useful open-source computational tools, including the GROMACS molecular dynamics simulation software package and ProDy for protein structural dynamics analysis.

Update on the MRI Core of the Alzheimer's Disease Neuroimaging Initiative

PubMed Central

Jack, Clifford R; Bernstein, Matt A; Borowski, Bret J; Gunter, Jeffrey L; Fox, Nick C; Thompson, Paul M; Schuff, Norbert; Krueger, Gunnar; Killiany, Ronald J; DeCarli, Charles S; Dale, Anders M; Weiner, Michael W

2010-01-01

Functions of the ADNI MRI core fall into three categories: (1) those of the central MRI core lab at Mayo Clinic, Rochester, Minnesota, needed to generate high quality MRI data in all subjects at each time point; (2) those of the funded ADNI MRI core imaging analysis groups responsible for analyzing the MRI data, and (3) the joint function of the entire MRI core in designing and problem solving MR image acquisition, pre-processing and analyses methods. The primary objective of ADNI was and continues to be improving methods for clinical trials in Alzheimer's disease. Our approach to the present (“ADNI-GO”) and future (“ADNI-2”, if funded) MRI protocol will be to maintain MRI methodological consistency in previously enrolled “ADNI-1” subjects who are followed longitudinally in ADNI-GO and ADNI-2. We will modernize and expand the MRI protocol for all newly enrolled ADNI-GO and ADNI-2 subjects. All newly enrolled subjects will be scanned at 3T with a core set of three sequence types: 3D T1-weighted volume, FLAIR, and a long TE gradient echo volumetric acquisition for micro hemorrhage detection. In addition to this core ADNI-GO and ADNI-2 protocol, we will perform vendor specific pilot sub-studies of arterial spin labeling perfusion, resting state functional connectivity and diffusion tensor imaging. One each of these sequences will be added to the core protocol on systems from each MRI vendor. These experimental sub-studies are designed to demonstrate the feasibility of acquiring useful data in a multi-center (but single vendor) setting for these three emerging MRI applications. PMID:20451869

Update on the magnetic resonance imaging core of the Alzheimer's disease neuroimaging initiative.

PubMed

Jack, Clifford R; Bernstein, Matt A; Borowski, Bret J; Gunter, Jeffrey L; Fox, Nick C; Thompson, Paul M; Schuff, Norbert; Krueger, Gunnar; Killiany, Ronald J; Decarli, Charles S; Dale, Anders M; Carmichael, Owen W; Tosun, Duygu; Weiner, Michael W

2010-05-01

Functions of the Alzheimer's Disease Neuroimaging Initiative (ADNI) magnetic resonance imaging (MRI) core fall into three categories: (1) those of the central MRI core laboratory at Mayo Clinic, Rochester, Minnesota, needed to generate high quality MRI data in all subjects at each time point; (2) those of the funded ADNI MRI core imaging analysis groups responsible for analyzing the MRI data; and (3) the joint function of the entire MRI core in designing and problem solving MR image acquisition, pre-processing, and analyses methods. The primary objective of ADNI was and continues to be improving methods for clinical trials in Alzheimer's disease. Our approach to the present ("ADNI-GO") and future ("ADNI-2," if funded) MRI protocol will be to maintain MRI methodological consistency in the previously enrolled "ADNI-1" subjects who are followed up longitudinally in ADNI-GO and ADNI-2. We will modernize and expand the MRI protocol for all newly enrolled ADNI-GO and ADNI-2 subjects. All newly enrolled subjects will be scanned at 3T with a core set of three sequence types: 3D T1-weighted volume, FLAIR, and a long TE gradient echo volumetric acquisition for micro hemorrhage detection. In addition to this core ADNI-GO and ADNI-2 protocol, we will perform vendor-specific pilot sub-studies of arterial spin-labeling perfusion, resting state functional connectivity, and diffusion tensor imaging. One of these sequences will be added to the core protocol on systems from each MRI vendor. These experimental sub-studies are designed to demonstrate the feasibility of acquiring useful data in a multicenter (but single vendor) setting for these three emerging MRI applications. Copyright 2010 The Alzheimer

Recommendations for Guidelines for Environment-Specific Magnetic-Field Measurements, Rapid Program Engineering Project #2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Electric Research and Management, Inc.; IIT Research Institute; Magnetic Measurements

1997-03-11

The purpose of this project was to document widely applicable methods for characterizing the magnetic fields in a given environment, recognizing the many sources co-existing within that space. The guidelines are designed to allow the reader to follow an efficient process to (1) plan the goals and requirements of a magnetic-field study, (2) develop a study structure and protocol, and (3) document and carry out the plan. These guidelines take the reader first through the process of developing a basic study strategy, then through planning and performing the data collection. Last, the critical factors of data management, analysis reporting, andmore » quality assurance are discussed. The guidelines are structured to allow the researcher to develop a protocol that responds to specific site and project needs. The Research and Public Information Dissemination Program (RAPID) is based on exposure to magnetic fields and the potential health effects. Therefore, the most important focus for these magnetic-field measurement guidelines is relevance to exposure. The assumed objective of an environment-specific measurement is to characterize the environment (given a set of occupants and magnetic-field sources) so that information about the exposure of the occupants may be inferred. Ideally, the researcher seeks to obtain complete or "perfect" information about these magnetic fields, so that personal exposure might also be modeled perfectly. However, complete data collection is not feasible. In fact, it has been made more difficult as the research field has moved to expand the list of field parameters measured, increasing the cost and complexity of performing a measurement and analyzing the data. The guidelines address this issue by guiding the user to design a measurement protocol that will gather the most exposure-relevant information based on the locations of people in relation to the sources. We suggest that the "microenvironment" become the base unit of area in a study, with boundaries defined by the occupant's activity patterns and the field variation from the sources affecting the area. Such a stratification allows the researcher to determine which microenvironment are of most interest, and to methodically focus the areas, in order to gather the most relevant set of data.« less

Feasibility randomised multicentre, double-blind, double-dummy controlled trial of anakinra, an interleukin-1 receptor antagonist versus intramuscular methylprednisolone for acute gout attacks in patients with chronic kidney disease (ASGARD): protocol study.

PubMed

Balasubramaniam, Gowrie; Parker, Trisha; Turner, David; Parker, Mike; Scales, Jonathan; Harnett, Patrick; Harrison, Michael; Ahmed, Khalid; Bhagat, Sweta; Marianayagam, Thiraupathy; Pitzalis, Costantino; Mallen, Christian; Roddy, Edward; Almond, Mike; Dasgupta, Bhaskar

2017-09-05

Acute gout occurs in people with chronic kidney disease, who are commonly older people with comorbidities such as hypertension, heart disease and diabetes. Potentially harmful treatments are administered to these vulnerable patients due to a lack of clear evidence. Newly available treatment that targets a key inflammatory pathway in acute gout attacks provides an opportunity to undertake the first-ever trial specifically looking treating people with kidney disease. This paper describes the protocol for a feasibility randomised controlled trial (RCT) comparing anakinra, a novel interleukin-1 antagonist versus steroids in people with chronic kidney disease (ASGARD). ASGARD is a two-parallel group double-blind, double-dummy multicentre RCT comparing anakinra 100 mg, an interleukin-1 antagonist, subcutaneous for 5 days against intramuscular methylprednisolone 120 mg. The primary objective is to assess the feasibility of the trial design and procedures for a definitive RCT. The specific aims are: (1) test recruitment and retention rates and willingness to be randomised; (2) test eligibility criteria; (3) collect and analyse outcome data to inform sample and power calculations for a trial of efficacy; (4) collect economic data to inform a future economic evaluation estimating costs of treatment and (5) assess capacity of the project to scale up to a national multicentre trial. We will also gather qualitative insights from participants. It aims to recruit 32 patients with a 1:1 randomisation. Information from this feasibility study will help design a definitive trial and provide general information in designing acute gout studies. The London-Central Ethics Committee approved the protocol. The results will be disseminated in peer-reviewed journals and at scientific conferences. EudraCT No. 2015-001787-19, NCT/Clinicalstrials.gov No. NCT02578394, pre-results, WHO Universal Trials Reference No. U1111-1175-1977. NIHR Grant PB-PG-0614-34090. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Accuracy of software-assisted detection of tumour feeders in transcatheter hepatic chemoembolization using three target definition protocols.

PubMed

Iwazawa, J; Ohue, S; Hashimoto, N; Mitani, T

2014-02-01

To compare the accuracy of computer software analysis using three different target-definition protocols to detect tumour feeder vessels for transarterial chemoembolization of hepatocellular carcinoma. C-arm computed tomography (CT) data were analysed for 81 tumours from 57 patients who had undergone chemoembolization using software-assisted detection of tumour feeders. Small, medium, and large-sized targets were manually defined for each tumour. The tumour feeder was verified when the target tumour was enhanced on selective C-arm CT of the investigated vessel during chemoembolization. The sensitivity, specificity, and accuracy of the three protocols were evaluated and compared. One hundred and eight feeder vessels supplying 81 lesions were detected. The sensitivity of the small, medium, and large target protocols was 79.8%, 91.7%, and 96.3%, respectively; specificity was 95%, 88%, and 50%, respectively; and accuracy was 87.5%, 89.9%, and 74%, respectively. The sensitivity was significantly higher for the medium (p = 0.003) and large (p < 0.001) target protocols than for the small target protocol. The specificity and accuracy were higher for the small (p < 0.001 and p < 0.001, respectively) and medium (p < 0.001 and p < 0.001, respectively) target protocols than for the large target protocol. The overall accuracy of software-assisted automated feeder analysis in transarterial chemoembolization for hepatocellular carcinoma is affected by the target definition size. A large target definition increases sensitivity and decreases specificity in detecting tumour feeders. A target size equivalent to the tumour size most accurately predicts tumour feeders. Copyright © 2013 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

Allergen Challenge Chamber: an innovative solution in allergic rhinitis diagnosis.

PubMed

Krzych-Fałta, Edyta; Sowa, Jerzy; Wojas, Oksana; Piekarska, Barbara; Sybilski, Adam; Samoliński, Bolesław

2015-12-01

The Allergen Challenge Chamber (ACC) is definitely a serious challenge on the one hand and an innovative solution in allergic rhinitis diagnosis on the other. The gradual validation of the chamber (according to the test protocol) will allow for standardisation, which is a process undertaken by centres worldwide. The process of designing a consistent system that allows for creating conditions as those in the case of natural inhalation took into account all the aspects (technical specification) necessary to ensure appropriate inhalation.

Next Generation Sequence Assembly with AMOS

PubMed Central

Treangen, Todd J; Sommer, Dan D; Angly, Florent E; Koren, Sergey; Pop, Mihai

2011-01-01

A Modular Open-Source Assembler (AMOS) was designed to offer a modular approach to genome assembly. AMOS includes a wide range of tools for assembly, including lightweight de novo assemblers Minimus and Minimo, and Bambus 2, a robust scaffolder able to handle metagenomic and polymorphic data. This protocol describes how to configure and use AMOS for the assembly of Next Generation sequence data. Additionally, we provide three tutorial examples that include bacterial, viral, and metagenomic datasets with specific tips for improving assembly quality. PMID:21400694

An X-protocol based medical teleconsultation system using low or high speed networks. A specific-design approach.

PubMed Central

Dueñas, A.; González, M. A.; Muñoz, A.; Salvador, C. H.

1994-01-01

The objective of this proposal is to provide solutions for the necessities of teleconsultation or telediagnosis among medical professionals, using work stations within the X-Windows environment and applicable in communication lines with an extensive range of bandwidths and operating system independence. Among the advantages sought are savings in transportation, improvement in the quality of the medical attention provided and continued training for the medical professional. Images Fig. 1 PMID:7949963

Government Information Locator Service (GILS). Draft report to the Information Infrastructure Task Force

NASA Technical Reports Server (NTRS)

1994-01-01

This is a draft report on the Government Information Locator Service (GILS) to the National Information Infrastructure (NII) task force. GILS is designed to take advantage of internetworking technology known as client-server architecture which allows information to be distributed among multiple independent information servers. Two appendices are provided -- (1) A glossary of related terminology and (2) extracts from a draft GILS profile for the use of the American National Standard Information Retrieval Application Service Definition and Protocol Specification for Library Applications.

Hybrid optimal scheduling for intermittent androgen suppression of prostate cancer

NASA Astrophysics Data System (ADS)

Hirata, Yoshito; di Bernardo, Mario; Bruchovsky, Nicholas; Aihara, Kazuyuki

2010-12-01

We propose a method for achieving an optimal protocol of intermittent androgen suppression for the treatment of prostate cancer. Since the model that reproduces the dynamical behavior of the surrogate tumor marker, prostate specific antigen, is piecewise linear, we can obtain an analytical solution for the model. Based on this, we derive conditions for either stopping or delaying recurrent disease. The solution also provides a design principle for the most favorable schedule of treatment that minimizes the rate of expansion of the malignant cell population.

Csbnd N bond formation in alicyclic and heterocyclic compounds by amine-modified nanoclay

NASA Astrophysics Data System (ADS)

Zarnegar, Zohre; Alizadeh, Roghayeh; Ahmadzadeh, Majid; Safari, Javad

2017-09-01

In the current protocol, amine functionalized montmorillonite K10 nanoclay (NH2-MMT) was applied to catalyze the formation of Csbnd N bonds in the synthesis of azines and 2-aminothiazoles at room temperature. In comparison with the current methods of Csbnd N bond formation, this approach displays specific advantages include atom economy, clean conversion, design for energy efficiency, the use of nontoxic and heterogeneous catalyst, higher purity and yields, safer solvent and reagents for this organic transformation.

[Design and realization of the communication system for the mobile medical terminal].

PubMed

Ji, Lei; Guo, Xu; Shi, Huayu

2013-01-01

Realizing wireless communication based on handset devices for medical staff; providing an instant messaging method. Constructing a set of communication protocols and standards; developing software both on server and client. Building an instant messaging system which follows the customized specification; based on Android the client provides functions like address book, message, voice service etc. As an independent module of the mobile medical terminal, the system can provide convenient communication for medical service with other mobile business.

Guidance from an NIH Workshop on Designing, Implementing, and Reporting Clinical Studies of Soy Interventions1–4

PubMed Central

Klein, Marguerite A.; Nahin, Richard L.; Messina, Mark J.; Rader, Jeanne I.; Thompson, Lilian U.; Badger, Thomas M.; Dwyer, Johanna T.; Kim, Young S.; Pontzer, Carol H.; Starke-Reed, Pamela E.; Weaver, Connie M.

2010-01-01

The NIH sponsored a scientific workshop, “Soy Protein/Isoflavone Research: Challenges in Designing and Evaluating Intervention Studies,” July 28–29, 2009. The workshop goal was to provide guidance for the next generation of soy protein/isoflavone human research. Session topics included population exposure to soy; the variability of the human response to soy; product composition; methods, tools, and resources available to estimate exposure and protocol adherence; and analytical methods to assess soy in foods and supplements and analytes in biologic fluids and other tissues. The intent of the workshop was to address the quality of soy studies, not the efficacy or safety of soy. Prior NIH workshops and an evidence-based review questioned the quality of data from human soy studies. If clinical studies are pursued, investigators need to ensure that the experimental designs are optimal and the studies properly executed. The workshop participants identified methodological issues that may confound study results and interpretation. Scientifically sound and useful options for dealing with these issues were discussed. The resulting guidance is presented in this document with a brief rationale. The guidance is specific to soy clinical research and does not address nonsoy-related factors that should also be considered in designing and reporting clinical studies. This guidance may be used by investigators, journal editors, study sponsors, and protocol reviewers for a variety of purposes, including designing and implementing trials, reporting results, and interpreting published epidemiological and clinical studies. PMID:20392880

Muscle strength and golf performance: a critical review.

PubMed

Torres-Ronda, Lorena; Sánchez-Medina, Luis; González-Badillo, Juan J

2011-01-01

Golf has become an increasingly popular sport and a growing body of research trying to identify its main physical requirements is being published. The aim of this review was twofold: first, to examine the existing scientific literature regarding strength training and golf in healthy, non-injured, subjects; and second, to reach conclusions that could provide information on how to design more effective strength training programs to improve golf performance as well as directions for future research. Studies which analyzed the relationship between muscle strength, swing performance variables (club head speed, driving distance, ball speed) and skill (handicap, score) were reviewed. Changes in swing performance following different strength training programs were also investigated. Finally, a critical analysis about the methodologies used was carried out. The results of the reviewed studies seem to indicate that: 1) a positive relationship exists between handicap and swing performance (even though few studies have investigated this issue); 2) there is a positive correlation between skill (handicap and/or score) and muscle strength; and 3) there is a relationship between driving distance, swing speed, ball speed and muscle strength. Results suggest that training leg-hip and trunk power as well as grip strength is especially relevant for golf performance improvement. Studies that analyzed variations in swing performance following resistance-only training programs are scarce, thus it is difficult to prove whether the observed improvements are attributable to changes in strength levels. Many of the studies reviewed presented some methodological errors in their design and not all strength assessment protocols seemed appropriate. Further studies should determine muscle strength needs in relation to final swing performance, using well designed experiments and strict isoinertial assessment protocols which adequately relate to specific golf motion, age and skill level. More studies with elite participants, either professional or amateur, would be especially desirable. Key pointsPOSITIVE CORRELATIONS EXIST BETWEEN: 1) handicap and swing performance variables; 2) muscle strength and skill (handicap and/or golf score); and 3) driving dis-tance, swing speed, ball speed and muscle strength.Leg-hip, trunk power and grip strength seem espe-cially relevant for golf performance improvement.Further research should determine muscle strength needs in relation to final swing performance, using well designed experiments and strict assessment pro-tocols which adequately relate to specific golf mo-tion, age and skill level.

Muscle Strength And Golf Performance: A Critical Review

PubMed Central

Torres-Ronda, Lorena; Sánchez-Medina, Luis; González-Badillo, Juan J.

2011-01-01

Golf has become an increasingly popular sport and a growing body of research trying to identify its main physical requirements is being published. The aim of this review was twofold: first, to examine the existing scientific literature regarding strength training and golf in healthy, non-injured, subjects; and second, to reach conclusions that could provide information on how to design more effective strength training programs to improve golf performance as well as directions for future research. Studies which analyzed the relationship between muscle strength, swing performance variables (club head speed, driving distance, ball speed) and skill (handicap, score) were reviewed. Changes in swing performance following different strength training programs were also investigated. Finally, a critical analysis about the methodologies used was carried out. The results of the reviewed studies seem to indicate that: 1) a positive relationship exists between handicap and swing performance (even though few studies have investigated this issue); 2) there is a positive correlation between skill (handicap and/or score) and muscle strength; and 3) there is a relationship between driving distance, swing speed, ball speed and muscle strength. Results suggest that training leg-hip and trunk power as well as grip strength is especially relevant for golf performance improvement. Studies that analyzed variations in swing performance following resistance-only training programs are scarce, thus it is difficult to prove whether the observed improvements are attributable to changes in strength levels. Many of the studies reviewed presented some methodological errors in their design and not all strength assessment protocols seemed appropriate. Further studies should determine muscle strength needs in relation to final swing performance, using well designed experiments and strict isoinertial assessment protocols which adequately relate to specific golf motion, age and skill level. More studies with elite participants, either professional or amateur, would be especially desirable. Key points Positive correlations exist between: 1) handicap and swing performance variables; 2) muscle strength and skill (handicap and/or golf score); and 3) driving dis-tance, swing speed, ball speed and muscle strength. Leg-hip, trunk power and grip strength seem espe-cially relevant for golf performance improvement. Further research should determine muscle strength needs in relation to final swing performance, using well designed experiments and strict assessment pro-tocols which adequately relate to specific golf mo-tion, age and skill level. PMID:24149290

High-Dose Chemotherapy, Total-Body Irradiation, and Autologous Stem Cell Transplantation or Bone Marrow Transplantation in Treating Patients With Hematologic Cancer or Solid Tumors

ClinicalTrials.gov

2013-05-07

Breast Cancer; Leukemia; Lymphoma; Multiple Myeloma and Plasma Cell Neoplasm; Testicular Germ Cell Tumor; Unspecified Adult Solid Tumor, Protocol Specific; Unspecified Childhood Solid Tumor, Protocol Specific

Ovarian Damage in Young Premenopausal Women Undergoing Chemotherapy for Cancer

ClinicalTrials.gov

2012-03-16

Leukemia; Long-term Effects Secondary to Cancer Therapy in Adults; Long-term Effects Secondary to Cancer Therapy in Children; Lymphoma; Sexual Dysfunction and Infertility; Sexuality and Reproductive Issues; Unspecified Adult Solid Tumor, Protocol Specific; Unspecified Childhood Solid Tumor, Protocol Specific

Prevention of Infection in Patients With Hematologic Cancer and Persistent Fever Caused by a Low White Blood Cell Count

ClinicalTrials.gov

2012-09-20

Bone Marrow Suppression; Fever, Sweats, and Hot Flashes; Infection; Leukemia; Lymphoma; Multiple Myeloma and Plasma Cell Neoplasm; Myelodysplastic Syndromes; Unspecified Adult Solid Tumor, Protocol Specific; Unspecified Childhood Solid Tumor, Protocol Specific

Ondansetron in Treating Patients With Advanced Cancer and Chronic Nausea and Vomiting Not Caused by Cancer Treatment

ClinicalTrials.gov

2016-07-01

Chronic Myeloproliferative Disorders; Leukemia; Lymphoma; Multiple Myeloma and Plasma Cell Neoplasm; Myelodysplastic Syndromes; Nausea and Vomiting; Precancerous Condition; Small Intestine Cancer; Unspecified Adult Solid Tumor, Protocol Specific; Unspecified Childhood Solid Tumor, Protocol Specific

Monitoring intervention fidelity of a lifestyle behavioral intervention delivered through telehealth

PubMed Central

Sineath, Ashley; Lambert, Lauren; Verga, Catherine; Wagstaff, Miranda

2017-01-01

Background Technology-based lifestyle behavioral interventions (i.e., telehealth, mHealth, eHealth, and/or digital health) are becoming an alternative standard of care and possess several advantages over traditional clinical settings such as convenience, cost, and the ability to tailor plans and feedback to a participant’s individual needs. These technology-based interventions also present unique challenges to intervention fidelity due to extra elements involved in executing the intervention. Intervention fidelity monitoring is essential to ensure internal and external validity, yet the development and utilization of fidelity protocols is under-reported in the literature. The purpose of this paper is to describe the intervention fidelity protocol for the 24-START study, a behavior change intervention delivered through telephone and internet. This paper also discusses the results of a pilot audit conducted to determine the feasibility of monitoring adherence to the fidelity protocol. Methods The 24-START fidelity protocol was developed in accordance with the five fidelity areas outlined by the NIH Behavior Change Consortium (NIH BCC) including: design of study, provider training, delivery of treatment, receipt of treatment, and enactment of treatment. The fidelity strategies provided by the NIH BCC in each area were tailored to fit the specific design of the 24-START study. Twenty-six total fidelity strategies were developed in accordance with the five areas and a corresponding fidelity monitoring plan was created. Because these strategies are only beneficial if implemented, the fidelity monitoring plan was developed to ensure the fidelity strategies are consistently implemented over the course of the intervention. Results A pilot audit of nine participant files was conducted to test the feasibility of the fidelity protocol developed. Out of the nine participant files reviewed, 89% of scheduled phone calls between a telehealth coach and participant were successfully completed. Of the completed calls, telehealth coaches delivered the intervention as intended 85.3% of the time, and 74% of planned secondary contacts made through the internet were delivered successfully. Additionally, between treatment group dosing was found to be equal. Several weak areas in the fidelity protocol were identified for improvement. The results were satisfactory and the audit was deemed feasible for ongoing use. Conclusions The NIH BCC provides a valuable framework for telehealth interventions to develop fidelity protocols ultimately contributing to improved internal and external validity, better translation of results, increased transparency, and increased opportunities for replication within the field. The 24-START pilot audit found the fidelity protocol efficacious and feasible while also identifying areas of weakness in need of revision. The refined protocol will continue to be utilized throughout the data collection phase. Future telehealth interventions should develop and disclose fidelity protocols to improve the overall quality and standard of telehealth interventions. PMID:28894745

Monitoring intervention fidelity of a lifestyle behavioral intervention delivered through telehealth.

PubMed

Sineath, Ashley; Lambert, Lauren; Verga, Catherine; Wagstaff, Miranda; Wingo, Brooks C

2017-01-01

Technology-based lifestyle behavioral interventions (i.e., telehealth, mHealth, eHealth, and/or digital health) are becoming an alternative standard of care and possess several advantages over traditional clinical settings such as convenience, cost, and the ability to tailor plans and feedback to a participant's individual needs. These technology-based interventions also present unique challenges to intervention fidelity due to extra elements involved in executing the intervention. Intervention fidelity monitoring is essential to ensure internal and external validity, yet the development and utilization of fidelity protocols is under-reported in the literature. The purpose of this paper is to describe the intervention fidelity protocol for the 24-START study, a behavior change intervention delivered through telephone and internet. This paper also discusses the results of a pilot audit conducted to determine the feasibility of monitoring adherence to the fidelity protocol. The 24-START fidelity protocol was developed in accordance with the five fidelity areas outlined by the NIH Behavior Change Consortium (NIH BCC) including: design of study, provider training, delivery of treatment, receipt of treatment, and enactment of treatment. The fidelity strategies provided by the NIH BCC in each area were tailored to fit the specific design of the 24-START study. Twenty-six total fidelity strategies were developed in accordance with the five areas and a corresponding fidelity monitoring plan was created. Because these strategies are only beneficial if implemented, the fidelity monitoring plan was developed to ensure the fidelity strategies are consistently implemented over the course of the intervention. A pilot audit of nine participant files was conducted to test the feasibility of the fidelity protocol developed. Out of the nine participant files reviewed, 89% of scheduled phone calls between a telehealth coach and participant were successfully completed. Of the completed calls, telehealth coaches delivered the intervention as intended 85.3% of the time, and 74% of planned secondary contacts made through the internet were delivered successfully. Additionally, between treatment group dosing was found to be equal. Several weak areas in the fidelity protocol were identified for improvement. The results were satisfactory and the audit was deemed feasible for ongoing use. The NIH BCC provides a valuable framework for telehealth interventions to develop fidelity protocols ultimately contributing to improved internal and external validity, better translation of results, increased transparency, and increased opportunities for replication within the field. The 24-START pilot audit found the fidelity protocol efficacious and feasible while also identifying areas of weakness in need of revision. The refined protocol will continue to be utilized throughout the data collection phase. Future telehealth interventions should develop and disclose fidelity protocols to improve the overall quality and standard of telehealth interventions.

Designing typefaces for maps. A protocol of tests.

NASA Astrophysics Data System (ADS)

Biniek, Sébastien; Touya, Guillaume; Rouffineau, Gilles; Huot-Marchand, Thomas

2018-05-01

The text management in map design is a topic generally linked to placement and composition issues. Whereas the type design issue is rarely addressed or at least only partially. Moreover the typefaces especially designed for maps are rare. This paper presents a protocol of tests to evaluate characters for digital topographic maps and fonts that were designed for the screen through the use of geographical information systems using this protocol. It was launched by the Atelier National de Recherche Typographique Research (ANRT, located in Nancy, France) and took place over his `post-master' course in 2013. The purpose is to isolate different issues inherent to text in a topographic map: map background, nonlinear text placement and toponymic hierarchies. Further research is necessary to improve this kind of approach.

Design and testing of regulatory cassettes for optimal activity in skeletal and cardiac muscles.

PubMed

Himeda, Charis L; Chen, Xiaolan; Hauschka, Stephen D

2011-01-01

Gene therapy for muscular dystrophies requires efficient gene delivery to the striated musculature and specific, high-level expression of the therapeutic gene in a physiologically diverse array of muscles. This can be achieved by the use of recombinant adeno-associated virus vectors in conjunction with muscle-specific regulatory cassettes. We have constructed several generations of regulatory cassettes based on the enhancer and promoter of the muscle creatine kinase gene, some of which include heterologous enhancers and individual elements from other muscle genes. Since the relative importance of many control elements varies among different anatomical muscles, we are aiming to tailor these cassettes for high-level expression in cardiac muscle, and in fast and slow skeletal muscles. With the achievement of efficient intravascular gene delivery to isolated limbs, selected muscle groups, and heart in large animal models, the design of cassettes optimized for activity in different muscle types is now a practical goal. In this protocol, we outline the key steps involved in the design of regulatory cassettes for optimal activity in skeletal and cardiac muscle, and testing in mature muscle fiber cultures. The basic principles described here can also be applied to engineering tissue-specific regulatory cassettes for other cell types.

A diabetes-specific enteral formula improves glycemic variability in patients with type 2 diabetes.

PubMed

Alish, Carolyn J; Garvey, W Timothy; Maki, Kevin C; Sacks, Gordon S; Hustead, Deborah S; Hegazi, Refaat A; Mustad, Vikkie A

2010-06-01

Well-controlled studies have demonstrated that inpatient hyperglycemia is an indicator of poor clinical outcomes, but the use of diabetes-specific enteral formulas in hospitalized patients remains a topic of great debate. In two different protocols, postprandial glycemia and insulinemia were measured in 22 subjects with diabetes fed a diabetes-specific or standard formula (protocol 1). Continuous glucose monitoring was used to assess glucose levels in 12 enterally fed patients with diabetes receiving the standard formula followed by the diabetes-specific formula continuously for 5 days each (protocol 2). End points included postprandial glycemia and insulinemia, glycemic variability (mean amplitude of glycemic excursions [MAGE]), mean glucose, and insulin use. In the postprandial response protocol, the diabetes-specific formula resulted in lower positive areas under the postprandial curve (P < 0.001) and peak glucose (P < 0.001) and insulin (P = 0.017) levels. In the protocol using continuous glucose monitoring, glycemic variability (as measured by MAGE) was lower with continuous administration of the diabetes-specific than the standard formula (64.6 +/- 6.8 mg/dL vs. 110.6 +/-15.3 mg/dL, P = 0.003). Also, administration of the diabetes-specific formula resulted in lower mean glucose concentrations during feeding (171.1 +/- 16.1 vs. 202.1 +/- 17.4 mg/dL, P = 0.024) and insulin requirements (7.8 +/- 2.3 vs. 10.9 +/- 3.3 units/day, P = 0.039) than the standard formula. Relative to the standard formula, the diabetes-specific formula reduced postprandial glycemia, mean glucose, glycemic variability, and short-acting insulin requirements. These results suggest potential clinical usefulness of a diabetes-specific enteral formula for minimizing glycemic excursions in hospitalized patients.

Participatory design of a collaborative clinical trial protocol writing system.

PubMed

Weng, Chunhua; McDonald, David W; Sparks, Dana; McCoy, Jason; Gennari, John H

2007-06-01

To explore concrete approaches to socio-technical design of collaborative healthcare information systems and to design a groupware technology for collaborative clinical trial protocol writing. We conducted "quick and dirty ethnography" through semi-structured interviews, observational studies, and work artifacts analysis to understand the group work for protocol development. We used participatory design through evolutionary prototyping to explore the feature space of a collaborative writing system. Our design strategies include role-based user advocacy, formative evaluation, and change management. Quick and dirty ethnography helped us efficiently understand relevant work practice, and participatory design helped us engage users into design and bring out their tacit work knowledge. Our approach that intertwined both techniques helped achieve a "work-informed and user-oriented" design. This research leads to a collaborative writing system that supports in situ communication, group awareness, and effective work progress tracking. The usability evaluation results have been satisfactory. The system design is being transferred to an organizational tool for daily use.

Standards for reporting chronic periodontitis prevalence and severity in epidemiologic studies: Proposed standards from the Joint EU/USA Periodontal Epidemiology Working Group.

PubMed

Holtfreter, Birte; Albandar, Jasim M; Dietrich, Thomas; Dye, Bruce A; Eaton, Kenneth A; Eke, Paul I; Papapanou, Panos N; Kocher, Thomas

2015-05-01

Periodontal diseases are common and their prevalence varies in different populations. However, prevalence estimates are influenced by the methodology used, including measurement techniques, case definitions, and periodontal examination protocols, as well as differences in oral health status. As a consequence, comparisons between populations are severely hampered and inferences regarding the global variation in prevalence can hardly be drawn. To overcome these limitations, the authors suggest standardized principles for the reporting of the prevalence and severity of periodontal diseases in future epidemiological studies. These principles include the comprehensive reporting of the study design, the recording protocol, and specific subject-related and oral data. Further, a range of periodontal data should be reported in the total population and within specific age groups. Periodontal data include the prevalence and extent of clinical attachment loss (CAL) and probing depth (PD) on site and tooth level according to specific thresholds, mean CAL/PD, the CDC/AAP case definition, and bleeding on probing. Consistent implementation of these standards in future studies will ensure improved reporting quality, permit meaningful comparisons of the prevalence of periodontal diseases across populations, and provide better insights into the determinants of such variation. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Numerical simulation of the optimal two-mode attacks for two-way continuous-variable quantum cryptography in reverse reconciliation

NASA Astrophysics Data System (ADS)

Zhang, Yichen; Li, Zhengyu; Zhao, Yijia; Yu, Song; Guo, Hong

2017-02-01

We analyze the security of the two-way continuous-variable quantum key distribution protocol in reverse reconciliation against general two-mode attacks, which represent all accessible attacks at fixed channel parameters. Rather than against one specific attack model, the expression of secret key rates of the two-way protocol are derived against all accessible attack models. It is found that there is an optimal two-mode attack to minimize the performance of the protocol in terms of both secret key rates and maximal transmission distances. We identify the optimal two-mode attack, give the specific attack model of the optimal two-mode attack and show the performance of the two-way protocol against the optimal two-mode attack. Even under the optimal two-mode attack, the performances of two-way protocol are still better than the corresponding one-way protocol, which shows the advantage of making double use of the quantum channel and the potential of long-distance secure communication using a two-way protocol.

DEVELOPMENT OF A RATIONALLY BASED DESIGN PROTOCOL FOR THE ULTRAVIOLET LIGHT DISINFECTION PROCESS

EPA Science Inventory

A protocol is demonstrated for the design and evaluation of ultraviolet (UV) disinfection systems based on a mathematical model. The disinfection model incorporates the system's physical dimensions, the residence time distribution of the reactor and dispersion characteristics, th...

A Novel Cross-Layer Routing Protocol Based on Network Coding for Underwater Sensor Networks

PubMed Central

Wang, Hao; Wang, Shilian; Bu, Renfei; Zhang, Eryang

2017-01-01

Underwater wireless sensor networks (UWSNs) have attracted increasing attention in recent years because of their numerous applications in ocean monitoring, resource discovery and tactical surveillance. However, the design of reliable and efficient transmission and routing protocols is a challenge due to the low acoustic propagation speed and complex channel environment in UWSNs. In this paper, we propose a novel cross-layer routing protocol based on network coding (NCRP) for UWSNs, which utilizes network coding and cross-layer design to greedily forward data packets to sink nodes efficiently. The proposed NCRP takes full advantages of multicast transmission and decode packets jointly with encoded packets received from multiple potential nodes in the entire network. The transmission power is optimized in our design to extend the life cycle of the network. Moreover, we design a real-time routing maintenance protocol to update the route when detecting inefficient relay nodes. Substantial simulations in underwater environment by Network Simulator 3 (NS-3) show that NCRP significantly improves the network performance in terms of energy consumption, end-to-end delay and packet delivery ratio compared with other routing protocols for UWSNs. PMID:28786915

Interaction of Bacteriophages with the Immune System: Induction of Bacteriophage-Specific Antibodies.

PubMed

Dąbrowska, Krystyna

2018-01-01

In all cases when a bacteriophage makes direct contact with a mammalian organism, it may challenge the mammalian immunological system. Its major consequence is production of antibodies specific to the bacteriophage. Here we present protocols applicable in studies of bacteriophage ability to induce specific antibodies. The protocols have been divided into three parts: purification, immunization, and detection (ELISA).

Running key mapping in a quantum stream cipher by the Yuen 2000 protocol

NASA Astrophysics Data System (ADS)

Shimizu, Tetsuya; Hirota, Osamu; Nagasako, Yuki

2008-03-01

A quantum stream cipher by Yuen 2000 protocol (so-called Y00 protocol or αη scheme) consisting of linear feedback shift register of short key is very attractive in implementing secure 40 Gbits/s optical data transmission, which is expected as a next-generation network. However, a basic model of the Y00 protocol with a very short key needs a careful design against fast correlation attacks as pointed out by Donnet This Brief Report clarifies an effectiveness of irregular mapping between running key and physical signals in the driver for selection of M -ary basis in the transmitter, and gives a design method. Consequently, quantum stream cipher by the Y00 protocol with our mapping has immunity against the proposed fast correlation attacks on a basic model of the Y00 protocol even if the key is very short.

A Novel Re-keying Function Protocol (NRFP) For Wireless Sensor Network Security

PubMed Central

Abdullah, Maan Younis; Hua, Gui Wei; Alsharabi, Naif

2008-01-01

This paper describes a novel re-keying function protocol (NRFP) for wireless sensor network security. A re-keying process management system for sensor networks is designed to support in-network processing. The design of the protocol is motivated by decentralization key management for wireless sensor networks (WSNs), covering key deployment, key refreshment, and key establishment. NRFP supports the establishment of novel administrative functions for sensor nodes that derive/re-derive a session key for each communication session. The protocol proposes direct connection, in-direct connection and hybrid connection. NRFP also includes an efficient protocol for local broadcast authentication based on the use of one-way key chains. A salient feature of the authentication protocol is that it supports source authentication without precluding innetwork processing. Security and performance analysis shows that it is very efficient in computation, communication and storage and, that NRFP is also effective in defending against many sophisticated attacks. PMID:27873963

A Novel Re-keying Function Protocol (NRFP) For Wireless Sensor Network Security.

PubMed

Abdullah, Maan Younis; Hua, Gui Wei; Alsharabi, Naif

2008-12-04

This paper describes a novel re-keying function protocol (NRFP) for wireless sensor network security. A re-keying process management system for sensor networks is designed to support in-network processing. The design of the protocol is motivated by decentralization key management for wireless sensor networks (WSNs), covering key deployment, key refreshment, and key establishment. NRFP supports the establishment of novel administrative functions for sensor nodes that derive/re-derive a session key for each communication session. The protocol proposes direct connection, in-direct connection and hybrid connection. NRFP also includes an efficient protocol for local broadcast authentication based on the use of one-way key chains. A salient feature of the authentication protocol is that it supports source authentication without precluding in-network processing. Security and performance analysis shows that it is very efficient in computation, communication and storage and, that NRFP is also effective in defending against many sophisticated attacks.

Recasting a traditional laboratory practical as a "Design-your-own protocol" to teach a universal research skill.

PubMed

Whitworth, David E

2016-07-08

Laboratory-based practical classes are a common feature of life science teaching, during which students learn how to perform experiments and generate/interpret data. Practical classes are typically instructional, concentrating on providing topic- and technique-specific skills, however to produce research-capable graduates it is also important to develop generic practical skills. To provide an opportunity for students to develop the skills needed to create bespoke protocols for experimental benchwork, a traditional practical was repurposed. Students were given a list of available resources and an experimental goal, and directed to create a bench protocol to achieve the aim (measuring the iron in hemoglobin). In a series of teaching events students received feedback from staff, and peers prototyped the protocols, before protocols were finally implemented. Graduates highlighted this exercise as one of the most important of their degrees, primarily because of the clear relevance of the skills acquired to professional practice. The exercise exemplifies a range of pedagogic principles, but arguably its most important innovation is that it repurposed a pre-existing practical. This had the benefits of automatically providing scaffolding to direct the students' thought processes, while retaining the advantages of a "discovery learning" exercise, and allowing facile adoption of the approach across the sector. © 2016 by The International Union of Biochemistry and Molecular Biology, 44(4):377-380, 2016. © 2016 The International Union of Biochemistry and Molecular Biology.

[Protocols Related to Food Allergies and Intolerances in Preschools in Reykjavik, Iceland].

PubMed

Thrastardottir, Adalheidur Ran; Thordardottir, Frida Run; Torfadottir, Johanna

2018-01-01

The aim of the study was to explore prevalence of food allergies and intolerances among children in preschools in Reykjavik, Iceland. Also, to investigate how well preschools maintain a safe environment for children with food allergies. In 2014, a questionnaire designed specifically for this study, was sent to 65 preschools. Forty-nine participated (75%) representing a total of 4225 children. Prevalence of food allergy and intolerance was determined based on medical certificates from physi-cians delivered to the preschools. Descriptive statistics were used to assess whether there were protocols related to food allergy, and if there was a difference between schools based on staff's education and number of children. The prevalence of documented food allergies/intolerances in children aged 2-6 years was 5%, 1% had severe allergy and 1% had multiple food allergies. Lactose intolerance was most frequent (2%), then milk allergy (2%) and egg allergy (1%). Only 41% preschools had a protocol that was activated if food with an allergen was accidentally given. Moreover, only 55% of preschools with children with severe -allergy reported all of their staff to have knowledge of symptoms related to anaphylaxis and only 64% were trained to respond to an anaphylactic shock. The education of preschool principals, kitchen employees and number of children in preschool were not related to having an active protocol at site. Prevalence of food allergy and intolerance was 5% in preschools in Reykjavik. Strategy for an active protocol related to food allergy was lacking in 59% of pre-schools.

Design Science Research toward Designing/Prototyping a Repeatable Model for Testing Location Management (LM) Algorithms for Wireless Networking

ERIC Educational Resources Information Center

Peacock, Christopher

2012-01-01

The purpose of this research effort was to develop a model that provides repeatable Location Management (LM) testing using a network simulation tool, QualNet version 5.1 (2011). The model will provide current and future protocol developers a framework to simulate stable protocol environments for development. This study used the Design Science…

22 CFR 2.4 - Designation of official guests.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Designation of official guests. 2.4 Section 2.4... Protocol. The designation of a person as an official guest is final. Pursuant to section 2658 of title 22... official guests is hereby delegated to the Chief of Protocol. (22 U.S.C. 2658) [45 FR 55716, Aug. 21, 1980] ...

Ontology-based configuration of problem-solving methods and generation of knowledge-acquisition tools: application of PROTEGE-II to protocol-based decision support.

PubMed

Tu, S W; Eriksson, H; Gennari, J H; Shahar, Y; Musen, M A

1995-06-01

PROTEGE-II is a suite of tools and a methodology for building knowledge-based systems and domain-specific knowledge-acquisition tools. In this paper, we show how PROTEGE-II can be applied to the task of providing protocol-based decision support in the domain of treating HIV-infected patients. To apply PROTEGE-II, (1) we construct a decomposable problem-solving method called episodic skeletal-plan refinement, (2) we build an application ontology that consists of the terms and relations in the domain, and of method-specific distinctions not already captured in the domain terms, and (3) we specify mapping relations that link terms from the application ontology to the domain-independent terms used in the problem-solving method. From the application ontology, we automatically generate a domain-specific knowledge-acquisition tool that is custom-tailored for the application. The knowledge-acquisition tool is used for the creation and maintenance of domain knowledge used by the problem-solving method. The general goal of the PROTEGE-II approach is to produce systems and components that are reusable and easily maintained. This is the rationale for constructing ontologies and problem-solving methods that can be composed from a set of smaller-grained methods and mechanisms. This is also why we tightly couple the knowledge-acquisition tools to the application ontology that specifies the domain terms used in the problem-solving systems. Although our evaluation is still preliminary, for the application task of providing protocol-based decision support, we show that these goals of reusability and easy maintenance can be achieved. We discuss design decisions and the tradeoffs that have to be made in the development of the system.

Air/Superfund national technical guidance study series, Volume 2. Estimation of baseline air emission at Superfund sites. Interim report(Final)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1989-01-01

This volume is one in a series of manuals prepared for EPA to assist its Remedial Project Managers in the assessment of the air contaminant pathway and developing input data for risk assessment. The manual provides guidance on developing baseline-emission estimates from hazardous waste sites. Baseline-emission estimates (BEEs) are defined as emission rates estimated for a site in its undisturbed state. Specifically, the manual is intended to: Present a protocol for selecting the appropriate level of effort to characterize baseline air emissions; Assist site managers in designing an approach for BEEs; Describe useful technologies for developing site-specific baseline emission estimatesmore » (BEEs); Help site managers select the appropriate technologies for generating site-specific BEEs.« less

Treatment of Middle East Respiratory Syndrome with a combination of lopinavir-ritonavir and interferon-β1b (MIRACLE trial): study protocol for a randomized controlled trial.

PubMed

Arabi, Yaseen M; Alothman, Adel; Balkhy, Hanan H; Al-Dawood, Abdulaziz; AlJohani, Sameera; Al Harbi, Shmeylan; Kojan, Suleiman; Al Jeraisy, Majed; Deeb, Ahmad M; Assiri, Abdullah M; Al-Hameed, Fahad; AlSaedi, Asim; Mandourah, Yasser; Almekhlafi, Ghaleb A; Sherbeeni, Nisreen Murad; Elzein, Fatehi Elnour; Memon, Javed; Taha, Yusri; Almotairi, Abdullah; Maghrabi, Khalid A; Qushmaq, Ismael; Al Bshabshe, Ali; Kharaba, Ayman; Shalhoub, Sarah; Jose, Jesna; Fowler, Robert A; Hayden, Frederick G; Hussein, Mohamed A

2018-01-30

It had been more than 5 years since the first case of Middle East Respiratory Syndrome coronavirus infection (MERS-CoV) was recorded, but no specific treatment has been investigated in randomized clinical trials. Results from in vitro and animal studies suggest that a combination of lopinavir/ritonavir and interferon-β1b (IFN-β1b) may be effective against MERS-CoV. The aim of this study is to investigate the efficacy of treatment with a combination of lopinavir/ritonavir and recombinant IFN-β1b provided with standard supportive care, compared to treatment with placebo provided with standard supportive care in patients with laboratory-confirmed MERS requiring hospital admission. The protocol is prepared in accordance with the SPIRIT (Standard Protocol Items: Recommendations for Interventional Trials) guidelines. Hospitalized adult patients with laboratory-confirmed MERS will be enrolled in this recursive, two-stage, group sequential, multicenter, placebo-controlled, double-blind randomized controlled trial. The trial is initially designed to include 2 two-stage components. The first two-stage component is designed to adjust sample size and determine futility stopping, but not efficacy stopping. The second two-stage component is designed to determine efficacy stopping and possibly readjustment of sample size. The primary outcome is 90-day mortality. This will be the first randomized controlled trial of a potential treatment for MERS. The study is sponsored by King Abdullah International Medical Research Center, Riyadh, Saudi Arabia. Enrollment for this study began in November 2016, and has enrolled thirteen patients as of Jan 24-2018. ClinicalTrials.gov, ID: NCT02845843 . Registered on 27 July 2016.

Outcome analysis of individualized vestibular rehabilitation protocols

NASA Technical Reports Server (NTRS)

Black, F. O.; Angel, C. R.; Pesznecker, S. C.; Gianna, C.

2000-01-01

OBJECTIVE: To determine the outcome of vestibular rehabilitation protocols in subjects with peripheral vestibular disorders compared with normal and abnormal control subjects. STUDY DESIGN: Prospective study using repeated measure, matched control design. Subjects were solicited consecutively according to these criteria: vestibular disorder subjects who had abnormal results of computerized dynamic posturography (CDP) sensory organization tests (SOTs) 5 and 6 and underwent rehabilitation; vestibular disorder subjects who had abnormal results of SOTs 5 and 6 and did not undergo rehabilitation; and normal subjects (normal SOTs). SETTING: Tertiary neurotology clinic. SUBJECTS: Men and women over age 18 with chronic vestibular disorders and chief complaints of unsteadiness, imbalance, and/or motion intolerance, and normal subjects. INTERVENTIONS: Pre- and post-rehabilitation assessment included CDP, vestibular disability, and activities of daily living questionnaires. Individualized rehabilitation plans were designed and implemented to address the subject's specific complaints and functional deficits. Supervised sessions were held at weekly intervals, and self-administered programs were devised for daily home use. MAIN OUTCOME MEASURES: CDP composite and SOT scores, number of falls on CDP, and self-assessment questionnaire results. RESULTS: Subjects who underwent rehabilitation (Group A) showed statistically significant improvements in SOTs, overall composite score, and reduction in falls compared with abnormal (Group B) control groups. Group A's performances after rehabilitation were not significantly different from those of normal subjects (Group C) in SOTs 3 through 6, and close to normal on SOTs 1 and 2. Subjects in Group A also reported statistically significant symptomatic improvement. CONCLUSIONS: Outcome measures of vestibular protocol physical therapy confirmed objective and subjective improvement in subjects with chronic peripheral vestibular disorders. These findings support results reported by other investigators.

Efficacy of smoking prevention program 'Smoke-free Kids': study protocol of a randomized controlled trial

PubMed Central

2009-01-01

Background A strong increase in smoking is noted especially among adolescents. In the Netherlands, about 5% of all 10-year olds, 25% of all 13-year olds and 62% of all 17-year olds report ever smoking. In the U.S., an intervention program called 'Smoke-free Kids' was developed to prevent children from smoking. The present study aims to assess the effects of this home-based smoking prevention program in the Netherlands. Methods/Design A randomized controlled trial is conducted among 9 to 11-year old children of primary schools. Participants are randomly assigned to the intervention and control conditions. The intervention program consists of five printed activity modules designed to improve parenting skills specific to smoking prevention and parent-child communication regarding smoking. These modules will include additional sheets with communication tips. The modules for the control condition will include solely information on smoking and tobacco use. Initiation of cigarette smoking (first instance of puffing on a lighted cigarette), susceptibility to cigarette smoking, smoking-related cognitions, and anti-smoking socialization will be the outcome measures. To collect the data, telephone interviews with mothers as well as with their child will be conducted at baseline. Only the children will be examined at post-intervention follow-ups (6, 12, 24, and 36 months after the baseline). Discussion This study protocol describes the design of a randomized controlled trial that will evaluate the effectiveness of a home-based smoking prevention program. We expect that a significantly lower number of children will start smoking in the intervention condition compared to control condition as a direct result of this intervention. If the program is effective, it is applicable in daily live, which will facilitate implementation of the prevention protocol. Trial registration Netherlands Trial Register NTR1465 PMID:20025727

Generation and purification of highly-specific antibodies for detecting post-translationally modified proteins in vivo

PubMed Central

Arur, Swathi; Schedl, Tim

2014-01-01

Post-translational modifications alter protein structure, affecting activity, stability, localization and/or binding partners. Antibodies that specifically recognize post-translationally modified proteins have a number of uses including immuno-cytochemistry and immuno-precipitation of the modified protein to purify protein-protein and protein-nucleic acid complexes. However, antibodies directed at modified sites on individual proteins are often non-specific. Here we describe a protocol to purify polyclonal antibodies that specifically detect the modified protein of interest. The approach uses iterative rounds of subtraction and affinity purification, using stringent washes to remove antibodies that recognize the unmodified protein and low sequence complexity epitopes containing the modified amino acid. Dot and western blots assays are employed to assess antibody preparation specificity. The approach is designed to overcome the common occurrence that a single round of subtraction and affinity purification is not sufficient to obtain a modified protein specific antibody preparation. One full round of antibody purification and specificity testing takes 6 days of discontinuous time. PMID:24457330

Defining the RNA Internal Loops Preferred by Benzimidazole Derivatives via Two-Dimensional Combinatorial Screening and Computational Analysis

PubMed Central

Velagapudi, Sai Pradeep; Seedhouse, Steven J.; French, Jonathan

2011-01-01

RNA is an important therapeutic target, however, RNA targets are generally underexploited due to a lack of understanding of the small molecules that bind RNA and the RNA motifs that bind small molecules. Herein, we describe the identification of the RNA internal loops derived from a 4096-member 3×3 nucleotide loop library that are the most specific and highest affinity binders to a series of four designer, drug-like benzimidazoles. These studies establish a potentially general protocol to define the highest affinity and most specific RNA motif targets for heterocyclic small molecules. Such information could be used to target functionally important RNAs in genomic sequence. PMID:21604752

Development of analytical methods for multiplex bio-assay with inductively coupled plasma mass spectrometry.

PubMed

Ornatsky, Olga I; Kinach, Robert; Bandura, Dmitry R; Lou, Xudong; Tanner, Scott D; Baranov, Vladimir I; Nitz, Mark; Winnik, Mitchell A

2008-01-01

Advances in the development of highly multiplexed bio-analytical assays with inductively coupled plasma mass spectrometry (ICP-MS) detection are discussed. Use of novel reagents specifically designed for immunological methods utilizing elemental analysis is presented. The major steps of method development, including selection of elements for tags, validation of tagged reagents, and examples of multiplexed assays, are considered in detail. The paper further describes experimental protocols for elemental tagging of antibodies, immunostaining of live and fixed human leukemia cells, and preparation of samples for ICP-MS analysis. Quantitative analysis of surface antigens on model cell lines using a cocktail of seven lanthanide labeled antibodies demonstrated high specificity and concordance with conventional immunophenotyping.

Hydrogen Hazards Assessment Protocol (HHAP): Approach and Methodology

NASA Technical Reports Server (NTRS)

Woods, Stephen

2009-01-01

This viewgraph presentation reviews the approach and methodology to develop a assessment protocol for hydrogen hazards. Included in the presentation are the reasons to perform hazards assessment, the types of hazard assessments that exist, an analysis of hydrogen hazards, specific information about the Hydrogen Hazards Assessment Protocol (HHAP). The assessment is specifically tailored for hydrogen behavior. The end product of the assesment is a compilation of hazard, mitigations and associated factors to facilitate decision making and achieve the best practice.

Internet Protocol Transition Workbook

DTIC Science & Technology

1982-03-01

U N C-* INTERNET PROTOCOL TRANSITION WORKBOOK March 1982 Network Information Canter SRI International Menlo Park, CA 94025 t tv l...Feinler Network Information Center SRI International Menlo Park. California 94025 (415) 859-3695 FEINLEROSRI-NIC (Online mail) [Page ii] I.7 Internet ...31 Postel. J., " Internet Control Message Protocol - DARPA Internet Program Protocol Specification." RFC 792, USC/ Information Sciences Institute

[Assessment of pragmatics from verbal spoken data].

PubMed

Gallardo-Paúls, B

2009-02-27

Pragmatic assessment is usually complex, long and sophisticated, especially for professionals who lack specific linguistic education and interact with impaired speakers. To design a quick method of assessment that will provide a quick general evaluation of the pragmatic effectiveness of neurologically affected speakers. This first filter will allow us to decide whether a detailed analysis of the altered categories should follow. Our starting point was the PerLA (perception, language and aphasia) profile of pragmatic assessment designed for the comprehensive analysis of conversational data in clinical linguistics; this was then converted into a quick questionnaire. A quick protocol of pragmatic assessment is proposed and the results found in a group of children with attention deficit hyperactivity disorder are discussed.

Management software for a universal device communication controller: application to monitoring and computerized infusions.

PubMed

Coussaert, E J; Cantraine, F R

1996-11-01

We designed a virtual device for a local area network observing, operating and connecting devices to a personal computer. To keep the widest field of application, we proceeded by using abstraction and specification rules of software engineering in the design and implementation of the hardware and software for the Infusion Monitor. We specially built a box of hardware to interface multiple medical instruments with different communication protocols to a PC via a single serial port. We called that box the Universal Device Communication Controller (UDCC). The use of the virtual device driver is illustrated by the Infusion Monitor implemented for the anaesthesia and intensive care workstation.

Compostability and biodegradation study of PLA-wheat straw and PLA-soy straw based green composites in simulated composting bioreactor.

PubMed

Pradhan, Ranjan; Misra, Manjusri; Erickson, Larry; Mohanty, Amar

2010-11-01

A laboratory scale simulated composting facility (as per ASTM D 5338) was designed and utilized to determine and evaluate the extent of degradation of polylactic acid (PLA), untreated wheat and soy straw and injection moulded composites of PLA-wheat straw (70:30) and PLA-soy straw (70:30). The outcomes of the study revealed the suitability of the test protocol, validity of the test system and defined the compostability of the composites of PLA with unmodified natural substrate. The study would help to design composites using modified soy straw and wheat straw as reinforcement/filler to satisfy ASTM D 6400 specifications. Copyright 2010 Elsevier Ltd. All rights reserved.

Optical processing for future computer networks

NASA Technical Reports Server (NTRS)

Husain, A.; Haugen, P. R.; Hutcheson, L. D.; Warrior, J.; Murray, N.; Beatty, M.

1986-01-01

In the development of future data management systems, such as the NASA Space Station, a major problem represents the design and implementation of a high performance communication network which is self-correcting and repairing, flexible, and evolvable. To obtain the goal of designing such a network, it will be essential to incorporate distributed adaptive network control techniques. The present paper provides an outline of the functional and communication network requirements for the Space Station data management system. Attention is given to the mathematical representation of the operations being carried out to provide the required functionality at each layer of communication protocol on the model. The possible implementation of specific communication functions in optics is also considered.

Evaluation of highly conserved hsp65-specific nested PCR primers for diagnosing Mycobacterium tuberculosis.

PubMed

Priyadarshini, P; Tiwari, K; Das, A; Kumar, D; Mishra, M N; Desikan, P; Nath, G

2017-02-01

To evaluate the sensitivity and specificity of a new nested set of primers designed for the detection of Mycobacterium tuberculosis complex targeting a highly conserved heat shock protein gene (hsp65). The nested primers were designed using multiple sequence alignment assuming the nucleotide sequence of the M. tuberculosis H37Rv hsp65 genome as base. Multidrug-resistant Mycobacterium species along with other non-mycobacterial and fungal species were included to evaluate the specificity of M. tuberculosis hsp65 gene-specific primers. The sensitivity of the primers was determined using serial 10-fold dilutions, and was 100% as shown by the bands in the case of M. tuberculosis complex. None of the other non M. tuberculosis complex bacterial and fungal species yielded any band on nested polymerase chain reaction (PCR). The first round of amplification could amplify 0.3 ng of the template DNA, while nested PCR could detect 0.3 pg. The present hsp65-specific primers have been observed to be sensitive, specific and cost-effective, without requiring interpretation of biochemical tests, real-time PCR, sequencing or high-performance liquid chromatography. These primer sets do not have the drawbacks associated with those protocols that target insertion sequence 6110, 16S rDNA, rpoB, recA and MPT 64.

Learning from failure - rationale and design for a study about discontinuation of randomized trials (DISCO study)

PubMed Central

2012-01-01

Background Randomized controlled trials (RCTs) may be discontinued because of apparent harm, benefit, or futility. Other RCTs are discontinued early because of insufficient recruitment. Trial discontinuation has ethical implications, because participants consent on the premise of contributing to new medical knowledge, Research Ethics Committees (RECs) spend considerable effort reviewing study protocols, and limited resources for conducting research are wasted. Currently, little is known regarding the frequency and characteristics of discontinued RCTs. Methods/Design Our aims are, first, to determine the prevalence of RCT discontinuation for specific reasons; second, to determine whether the risk of RCT discontinuation for specific reasons differs between investigator- and industry-initiated RCTs; third, to identify risk factors for RCT discontinuation due to insufficient recruitment; fourth, to determine at what stage RCTs are discontinued; and fifth, to examine the publication history of discontinued RCTs. We are currently assembling a multicenter cohort of RCTs based on protocols approved between 2000 and 2002/3 by 6 RECs in Switzerland, Germany, and Canada. We are extracting data on RCT characteristics and planned recruitment for all included protocols. Completion and publication status is determined using information from correspondence between investigators and RECs, publications identified through literature searches, or by contacting the investigators. We will use multivariable regression models to identify risk factors for trial discontinuation due to insufficient recruitment. We aim to include over 1000 RCTs of which an anticipated 150 will have been discontinued due to insufficient recruitment. Discussion Our study will provide insights into the prevalence and characteristics of RCTs that were discontinued. Effective recruitment strategies and the anticipation of problems are key issues in the planning and evaluation of trials by investigators, Clinical Trial Units, RECs and funding agencies. Identification and modification of barriers to successful study completion at an early stage could help to reduce the risk of trial discontinuation, save limited resources, and enable RCTs to better meet their ethical requirements. PMID:22928744

PrimerMapper: high throughput primer design and graphical assembly for PCR and SNP detection

PubMed Central

O’Halloran, Damien M.

2016-01-01

Primer design represents a widely employed gambit in diverse molecular applications including PCR, sequencing, and probe hybridization. Variations of PCR, including primer walking, allele-specific PCR, and nested PCR provide specialized validation and detection protocols for molecular analyses that often require screening large numbers of DNA fragments. In these cases, automated sequence retrieval and processing become important features, and furthermore, a graphic that provides the user with a visual guide to the distribution of designed primers across targets is most helpful in quickly ascertaining primer coverage. To this end, I describe here, PrimerMapper, which provides a comprehensive graphical user interface that designs robust primers from any number of inputted sequences while providing the user with both, graphical maps of primer distribution for each inputted sequence, and also a global assembled map of all inputted sequences with designed primers. PrimerMapper also enables the visualization of graphical maps within a browser and allows the user to draw new primers directly onto the webpage. Other features of PrimerMapper include allele-specific design features for SNP genotyping, a remote BLAST window to NCBI databases, and remote sequence retrieval from GenBank and dbSNP. PrimerMapper is hosted at GitHub and freely available without restriction. PMID:26853558

Use of a web-based image reporting and tracking system for assessing abdominal imaging examination quality issues in a single practice.

PubMed

Rosenkrantz, Andrew B; Johnson, Evan; Sanger, Joseph J

2015-10-01

This article presents our local experience in the implementation of a real-time web-based system for reporting and tracking quality issues relating to abdominal imaging examinations. This system allows radiologists to electronically submit examination quality issues during clinical readouts. The submitted information is e-mailed to a designate for the given modality for further follow-up; the designate may subsequently enter text describing their response or action taken, which is e-mailed back to the radiologist. Review of 558 entries over a 6-year period demonstrated documentation of a broad range of examination quality issues, including specific issues relating to protocol deviation, post-processing errors, positioning errors, artifacts, and IT concerns. The most common issues varied among US, CT, MRI, radiography, and fluoroscopy. In addition, the most common issues resulting in a patient recall for repeat imaging (generally related to protocol deviation in MRI and US) were identified. In addition to submitting quality problems, radiologists also commonly used the tool to provide recognition of a well-performed examination. An electronic log of actions taken in response to radiologists' submissions indicated that both positive and negative feedback were commonly communicated to the performing technologist. Information generated using the tool can be used to guide subsequent quality improvement initiatives within a practice, including continued protocol standardization as well as education of technologists in the optimization of abdominal imaging examinations.

Novel primers and PCR protocols for the specific detection and quantification of Sphingobium suberifaciens in situ

USDA-ARS?s Scientific Manuscript database

The pathogen causing corky root on lettuce, Sphingobium suberifaciens, is recalcitrant to standard epidemiological methods. Primers were selected from 16S rDNA sequences useful for the specific detection and quantification of S. suberifaciens. Conventional (PCR) and quantitative (qPCR) PCR protocols...

One Approach for Transitioning the iNET Standards into the IRIG 106 Telemetry Standards

DTIC Science & Technology

2015-05-26

Protocol Suite. Figure 1 illustrates the Open Systems Interconnection ( OSI ) Model, the corresponding TCP/IP Model, and the major components of the TCP...IP Protocol Suite. Figure 2 represents the iNET-specific protocols layered onto the TCP/IP Model. Figure 1. OSI and TCP/IP Model with TCP/IP...Protocol Suite TCP/IP Protocol Suite Major Components IPv4 IPv6 TCP/IP Model OSI Model Application Presentation

Dual sensory loss: development of a dual sensory loss protocol and design of a randomized controlled trial

PubMed Central

2013-01-01

Background Dual sensory loss (DSL) has a negative impact on health and wellbeing and its prevalence is expected to increase due to demographic aging. However, specialized care or rehabilitation programs for DSL are scarce. Until now, low vision rehabilitation does not sufficiently target concurrent impairments in vision and hearing. This study aims to 1) develop a DSL protocol (for occupational therapists working in low vision rehabilitation) which focuses on optimal use of the senses and teaches DSL patients and their communication partners to use effective communication strategies, and 2) describe the multicenter parallel randomized controlled trial (RCT) designed to test the effectiveness and cost-effectiveness of the DSL protocol. Methods/design To develop a DSL protocol, literature was reviewed and content was discussed with professionals in eye/ear care (interviews/focus groups) and DSL patients (interviews). A pilot study was conducted to test and confirm the DSL protocol. In addition, a two-armed international multi-center RCT will evaluate the effectiveness and cost-effectiveness of the DSL protocol compared to waiting list controls, in 124 patients in low vision rehabilitation centers in the Netherlands and Belgium. Discussion This study provides a treatment protocol for rehabilitation of DSL within low vision rehabilitation, which aims to be a valuable addition to the general low vision rehabilitation care. Trial registration Netherlands Trial Register (NTR) identifier: NTR2843 PMID:23941667

Context factors in general practitioner-patient encounters and their impact on assessing communication skills--an exploratory study.

PubMed

Essers, Geurt; Kramer, Anneke; Andriesse, Boukje; van Weel, Chris; van der Vleuten, Cees; van Dulmen, Sandra

2013-05-22

Assessment of medical communication performance usually focuses on rating generically applicable, well-defined communication skills. However, in daily practice, communication is determined by (specific) context factors, such as acquaintance with the patient, or the presented problem. Merely valuing the presence of generic skills may not do justice to the doctor's proficiency.Our aim was to perform an exploratory study on how assessment of general practitioner (GP) communication performance changes if context factors are explicitly taken into account. We used a mixed method design to explore how ratings would change. A random sample of 40 everyday GP consultations was used to see if previously identified context factors could be observed again. The sample was rated twice using a widely used assessment instrument (the MAAS-Global), first in the standard way and secondly after context factors were explicitly taken into account, by using a context-specific rating protocol to assess communication performance in the workplace. In between first and second rating, the presence of context factors was established. Item score differences were calculated using paired sample t-tests. In 38 out of 40 consultations, context factors prompted application of the context-specific rating protocol. Mean overall score on the 7-point MAAS-Global scale increased from 2.98 in standard to 3.66 in the context-specific rating (p<0.00); the effect size for the total mean score was 0.84. In earlier research the minimum standard score for adequate communication was set at 3.17. Applying the protocol, the mean overall score rose above the level set in an earlier study for the MAAS-Global scores to represent 'adequate GP communication behaviour'. Our findings indicate that incorporating context factors in communication assessment thus makes a meaningful difference and shows that context factors should be considered as 'signal' instead of 'noise' in GP communication assessment. Explicating context factors leads to a more deliberate and transparent rating of GP communication performance.

Environmental Compliance Assessment Protocol-Centers for Disease Control and Prevention (ECAP-CDC)

DTIC Science & Technology

1993-10-01

propellers, or appliances. 2. Military weapons or equipment designed for combat use. 3. Rockets or equipment designed for research, or experimental or...should be reproduced and used during the assessment to take notes. It is designed to be inserted between each page of the protocols, allowing the...procedures are designed as an aid and should not be considered exhaus- tive. Use of the guide requires the evaluator’s judgement to play a role in

Altered Mental Status: Current Evidence-based Recommendations for Prehospital Care.

PubMed

Sanello, Ashley; Gausche-Hill, Marianne; Mulkerin, William; Sporer, Karl A; Brown, John F; Koenig, Kristi L; Rudnick, Eric M; Salvucci, Angelo A; Gilbert, Gregory H

2018-05-01

In the United States emergency medical services (EMS) protocols vary widely across jurisdictions. We sought to develop evidence-based recommendations for the prehospital evaluation and treatment of a patient with an acute change in mental status and to compare these recommendations against the current protocols used by the 33 EMS agencies in the State of California. We performed a literature review of the current evidence in the prehospital treatment of a patient with altered mental status (AMS) and augmented this review with guidelines from various national and international societies to create our evidence-based recommendations. We then compared the AMS protocols of each of the 33 EMS agencies for consistency with these recommendations. The specific protocol components that we analyzed were patient assessment, point-of-care tests, supplemental oxygen, use of standardized scoring, evaluating for causes of AMS, blood glucose evaluation, toxicological treatment, and pediatric evaluation and management. Protocols across 33 EMS agencies in California varied widely. All protocols call for a blood glucose check, 21 (64%) suggest treating adults at <60mg/dL, and half allow for the use of dextrose 10%. All the protocols recommend naloxone for signs of opioid overdose, but only 13 (39%) give specific parameters. Half the agencies (52%) recommend considering other toxicological causes of AMS, often by using the mnemonic AEIOU TIPS. Eight (24%) recommend a 12-lead electrocardiogram; others simply suggest cardiac monitoring. Fourteen (42%) advise supplemental oxygen as needed; only seven (21%) give specific parameters. In terms of considering various etiologies of AMS, 25 (76%) give instructions to consider trauma, 20 (61%) to consider stroke, and 18 (55%) to consider seizure. Twenty-three (70%) of the agencies have separate pediatric AMS protocols; others include pediatric considerations within the adult protocol. Protocols for patients with AMS vary widely across the State of California. The evidence-based recommendations that we present for the prehospital diagnosis and treatment of this condition may be useful for EMS medical directors tasked with creating and revising these protocols.

Specification and Design of a Fault Recovery Model for the Reliable Multicast Protocol

NASA Technical Reports Server (NTRS)

Montgomery, Todd; Callahan, John R.; Whetten, Brian

1996-01-01

The Reliable Multicast Protocol (RMP) provides a unique, group-based model for distributed programs that need to handle reconfiguration events at the application layer. This model, called membership views, provides an abstraction in which events such as site failures, network partitions, and normal join-leave events are viewed as group reformations. RMP provides access to this model through an application programming interface (API) that notifies an application when a group is reformed as the result of a some event. RMP provides applications with reliable delivery of messages using an underlying IP Multicast media to other group members in a distributed environment even in the case of reformations. A distributed application can use various Quality of Service (QoS) levels provided by RMP to tolerate group reformations. This paper explores the implementation details of the mechanisms in RMP that provide distributed applications with membership view information and fault recovery capabilities.

Metropolitian area network services comprised of virtual local area networks running over hybrid fiber-coax and asynchronous transfer mode technologies

NASA Astrophysics Data System (ADS)

Biedron, William S.

1995-11-01

Since 1990 there has been a rapid increase in the demand for communication services, especially local and wide area network (LAN/WAN) oriented services. With the introduction of the DFB laser transmitter, hybrid-fiber-coax (HFC) cable plant designs, ATM transport technologies and rf modems, new LAN/WAN services can now be defined and marketed to residential and business customers over existing cable TV systems. The term metropolitan area network (MAN) can be used to describe this overall network. This paper discusses the technical components needed to provision these services as well as provides some perspectives on integration issues. Architecture at the headend and in the backbone is discussed, as well as specific service definitions and the technology issues associated with each. The TCP/IP protocol is suggested as a primary protocol to be used throughout the MAN.

Microfluidics for rapid cytokeratin immunohistochemical staining in frozen sections.

PubMed

Brajkovic, Saska; Dupouy, Diego G; de Leval, Laurence; Gijs, Martin Am

2017-08-01

Frozen sections (FS) of tumor samples represent a cornerstone of pathological intraoperative consultation and have an important role in the microscopic analysis of specimens during surgery. So far, immunohistochemical (IHC) stainings on FS have been demonstrated for a few markers using manual methods. Microfluidic technologies have proven to bring substantial improvement in many fields of diagnostics, though only a few microfluidic devices have been designed to improve the performance of IHC assays. In this work, we show optimization of a complete pan-cytokeratin chromogenic immunostaining protocol on FS using a microfluidic tissue processor into a protocol taking <12 min. Our results showed specificity and low levels of background. The dimensions of the microfluidic prototype device are compatible with the space constraints of an intraoperative pathology laboratory. We therefore anticipate that the adoption of microfluidic technologies in the field of surgical pathology can significantly improve the way FSs influence surgical procedures.

Microfluidics for rapid cytokeratin immunohistochemical staining in frozen sections

PubMed Central

Brajkovic, Saska; Dupouy, Diego G.; de Leval, Laurence; Gijs, Martin A. M.

2017-01-01

Frozen sections (FS) of tumor samples represent a cornerstone of pathological intraoperative consultation and play an important role in the microscopic analysis of specimens during surgery. So far, immunohistochemical (IHC) stainings on FS have been demonstrated for a few markers using manual methods. Microfluidic technologies have proven to bring substantial improvement in many fields of diagnostics, though only a few microfluidic devices have been designed to improve the performance of IHC assays. In this work, we show optimization of a complete pan-cytokeratin chromogenic immunostaining protocol on FS using a microfluidic tissue processor, into a protocol taking less than 12 minutes. Our results showed specificity and low levels of background. The dimensions of the microfluidic prototype device are compatible with the space constraints of an intraoperative pathology laboratory. We therefore anticipate that the adoption of microfluidic technologies in the field of surgical pathology can significantly improve the way FSs influence surgical procedures. PMID:28553936

Acute Illness Protocol for Maple Syrup Urine Disease.

PubMed

Rodan, Lance H; Aldubayan, Saud H; Berry, Gerard T; Levy, Harvey L

2018-01-01

Inborn errors of metabolism (IEMs) are genetic disorders that disrupt enzyme activity, cellular transport, or energy production. They are individually rare but collectively have an incidence of 1:1000. Most patients with IEMs are followed up by a physician with expertise in biochemical genetics (metabolism), but may present outside this setting. Because IEMs can present acutely with life-threatening crises that require specific interventions, it is critical for the emergency medicine physician, pediatrician, internist, and critical care physician as well as the biochemical geneticist to have information on the initial assessment and management of patients with these disorders. Appropriate early care can be lifesaving. This protocol is not designed to replace the expert consultation of a biochemical geneticist, but rather to improve early care and increase the level of comfort of the acute care physician with initial management of maple syrup urine disease until specialty consultation is obtained.

Universal Reconfigurable Translator Module (URTM) Final Report

NASA Technical Reports Server (NTRS)

Leventhal, Edward; Machan, Roman; Jones, Rob

2009-01-01

This report describes the Universal Reconfigurable Translation Module, or URTM. The URTM was developed by Sigma Space Corporation for NASA in order to translate specific serial protocols, both logically and physically. At present, the prototype configuration has targeted MIL-STD-1553B (RT and BC), IEEE 1394b (Firewire), and ECSS-E-50-12A (SpaceWire). The objectives of this program were to study the feasibility of a configurable URTM to translate serial link data as might be used in a space-flight mission and to design, develop, document, and deliver an engineering prototype model of the URTM with a path to spaceflight. By simply connecting two of the three Physical Interface Modules (PIM) on either end of the RPTM (Reconfigurable Protocol Translator Module), the URTM then self configures via a library of interface translation functions, thereby allowing the two data links to communicate seamlessly.

Effects of a Straw Phonation Protocol on Acoustic and Perceptual Measures of an SATB Chorus.

PubMed

Manternach, Jeremy N; Daugherty, James F

2017-12-29

Recent scholarship has suggested that semi-occluded vocal tract (SOVT) exercises may increase vocal economy of individuals by reducing vocal effort while maintaining or increasing acoustic output. Choral singers, however, may use different resonance techniques or change voicing behaviors in an effort to hear their own sound in relation to others. One investigation revealed significant increases in a choir's mean spectral energy after participating in a straw phonation protocol. However, that study reported only acoustic measures and did not include choristers' perceptions of the choral sound and their own voicing efficiency. The purpose of this study was to measure the effect of a straw phonation protocol on acoustic (long-term average spectrum) and perceptual (self-report) measures of the choral sound of an intact soprano, alto, tenor, and bass (SATB) choir. This is a quasi-experimental, one-group, pretest-posttest design. An SATB choir (N = 48 singers) performed a Renaissance motet, participated in a 4-minute voicing protocol with a small straw, and then sang the motet a second time. They completed the same procedure later in the rehearsal. Long-term average spectrum results indicated no statistically significant mean changes in spectral energy after the SOVT protocols. Most participants, however, perceived that the choir sounded better (78.26%) and that their own vocal production was more efficient or comfortable (73.91%) following the protocol. Choristers perceived less vocal effort while maintaining vocal output after straw phonation, which may feasibly align with extant solo research. More research may determine whether this result is due specifically to SOVTs. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Development of an efficient real-time quantitative PCR protocol for detection of Xanthomonas arboricola pv. pruni in Prunus species.

PubMed

Palacio-Bielsa, Ana; Cubero, Jaime; Cambra, Miguel A; Collados, Raquel; Berruete, Isabel M; López, María M

2011-01-01

Xanthomonas arboricola pv. pruni, the causal agent of bacterial spot disease of stone fruit, is considered a quarantine organism by the European Union and the European and Mediterranean Plant Protection Organization (EPPO). The bacterium can undergo an epiphytic phase and/or be latent and can be transmitted by plant material, but currently, only visual inspections are used to certify plants as being X. arboricola pv. pruni free. A novel and highly sensitive real-time TaqMan PCR detection protocol was designed based on a sequence of a gene for a putative protein related to an ABC transporter ATP-binding system in X. arboricola pv. pruni. Pathogen detection can be completed within a few hours with a sensitivity of 10(2) CFU ml(-1), thus surpassing the sensitivity of the existing conventional PCR. Specificity was assessed for X. arboricola pv. pruni strains from different origins as well as for closely related Xanthomonas species, non-Xanthomonas species, saprophytic bacteria, and healthy Prunus samples. The efficiency of the developed protocol was evaluated with field samples of 14 Prunus species and rootstocks. For symptomatic leaf samples, the protocol was very efficient even when washed tissues of the leaves were directly amplified without any previous DNA extraction. For samples of 117 asymptomatic leaves and 285 buds, the protocol was more efficient after a simple DNA extraction, and X. arboricola pv. pruni was detected in 9.4% and 9.1% of the 402 samples analyzed, respectively, demonstrating its frequent epiphytic or endophytic phase. This newly developed real-time PCR protocol can be used as a quantitative assay, offers a reliable and sensitive test for X. arboricola pv. pruni, and is suitable as a screening test for symptomatic as well as asymptomatic plant material.

Using Colored Stochastic Petri Net (CS-PN) software for protocol specification, validation, and evaluation

NASA Technical Reports Server (NTRS)

Zenie, Alexandre; Luguern, Jean-Pierre

1987-01-01

The specification, verification, validation, and evaluation, which make up the different steps of the CS-PN software are outlined. The colored stochastic Petri net software is applied to a Wound/Wait protocol decomposable into two principal modules: request or couple (transaction, granule) treatment module and wound treatment module. Each module is specified, verified, validated, and then evaluated separately, to deduce a verification, validation and evaluation of the complete protocol. The colored stochastic Petri nets tool is shown to be a natural extension of the stochastic tool, adapted to distributed systems and protocols, because the color conveniently takes into account the numerous sites, transactions, granules and messages.

An electronic specimen collection protocol schema (eSCPS). Document architecture for specimen management and the exchange of specimen collection protocols between biobanking information systems.

PubMed

Eminaga, O; Semjonow, A; Oezguer, E; Herden, J; Akbarov, I; Tok, A; Engelmann, U; Wille, S

2014-01-01

The integrity of collection protocols in biobanking is essential for a high-quality sample preparation process. However, there is not currently a well-defined universal method for integrating collection protocols in the biobanking information system (BIMS). Therefore, an electronic schema of the collection protocol that is based on Extensible Markup Language (XML) is required to maintain the integrity and enable the exchange of collection protocols. The development and implementation of an electronic specimen collection protocol schema (eSCPS) was performed at two institutions (Muenster and Cologne) in three stages. First, we analyzed the infrastructure that was already established at both the biorepository and the hospital information systems of these institutions and determined the requirements for the sufficient preparation of specimens and documentation. Second, we designed an eSCPS according to these requirements. Finally, a prospective study was conducted to implement and evaluate the novel schema in the current BIMS. We designed an eSCPS that provides all of the relevant information about collection protocols. Ten electronic collection protocols were generated using the supplementary Protocol Editor tool, and these protocols were successfully implemented in the existing BIMS. Moreover, an electronic list of collection protocols for the current studies being performed at each institution was included, new collection protocols were added, and the existing protocols were redesigned to be modifiable. The documentation time was significantly reduced after implementing the eSCPS (5 ± 2 min vs. 7 ± 3 min; p = 0.0002). The eSCPS improves the integrity and facilitates the exchange of specimen collection protocols in the existing open-source BIMS.

Application Level Protocol Development for Library and Information Science Applications. Volume 1: Service Definition. Volume 2: Protocol Specification. Report No. TG.1.5; TG.50.

ERIC Educational Resources Information Center

Aagaard, James S.; And Others

This two-volume document specifies a protocol that was developed using the Reference Model for Open Systems Interconnection (OSI), which provides a framework for communications within a heterogeneous network environment. The protocol implements the features necessary for bibliographic searching, record maintenance, and mail transfer between…

System for Configuring Modular Telemetry Transponders

NASA Technical Reports Server (NTRS)

Varnavas, Kosta A. (Inventor); Sims, William Herbert, III (Inventor)

2014-01-01

A system for configuring telemetry transponder cards uses a database of error checking protocol data structures, each containing data to implement at least one CCSDS protocol algorithm. Using a user interface, a user selects at least one telemetry specific error checking protocol from the database. A compiler configures an FPGA with the data from the data structures to implement the error checking protocol.

Next-generation, personalised, model-based critical care medicine: a state-of-the art review of in silico virtual patient models, methods, and cohorts, and how to validation them.

PubMed

Chase, J Geoffrey; Preiser, Jean-Charles; Dickson, Jennifer L; Pironet, Antoine; Chiew, Yeong Shiong; Pretty, Christopher G; Shaw, Geoffrey M; Benyo, Balazs; Moeller, Knut; Safaei, Soroush; Tawhai, Merryn; Hunter, Peter; Desaive, Thomas

2018-02-20

Critical care, like many healthcare areas, is under a dual assault from significantly increasing demographic and economic pressures. Intensive care unit (ICU) patients are highly variable in response to treatment, and increasingly aging populations mean ICUs are under increasing demand and their cohorts are increasingly ill. Equally, patient expectations are growing, while the economic ability to deliver care to all is declining. Better, more productive care is thus the big challenge. One means to that end is personalised care designed to manage the significant inter- and intra-patient variability that makes the ICU patient difficult. Thus, moving from current "one size fits all" protocolised care to adaptive, model-based "one method fits all" personalised care could deliver the required step change in the quality, and simultaneously the productivity and cost, of care. Computer models of human physiology are a unique tool to personalise care, as they can couple clinical data with mathematical methods to create subject-specific models and virtual patients to design new, personalised and more optimal protocols, as well as to guide care in real-time. They rely on identifying time varying patient-specific parameters in the model that capture inter- and intra-patient variability, the difference between patients and the evolution of patient condition. Properly validated, virtual patients represent the real patients, and can be used in silico to test different protocols or interventions, or in real-time to guide care. Hence, the underlying models and methods create the foundation for next generation care, as well as a tool for safely and rapidly developing personalised treatment protocols over large virtual cohorts using virtual trials. This review examines the models and methods used to create virtual patients. Specifically, it presents the models types and structures used and the data required. It then covers how to validate the resulting virtual patients and trials, and how these virtual trials can help design and optimise clinical trial. Links between these models and higher order, more complex physiome models are also discussed. In each section, it explores the progress reported up to date, especially on core ICU therapies in glycemic, circulatory and mechanical ventilation management, where high cost and frequency of occurrence provide a significant opportunity for model-based methods to have measurable clinical and economic impact. The outcomes are readily generalised to other areas of medical care.

Operator assistant systems - An experimental approach using a telerobotics application

NASA Technical Reports Server (NTRS)

Boy, Guy A.; Mathe, Nathalie

1993-01-01

This article presents a knowledge-based system methodology for developing operator assistant (OA) systems in dynamic and interactive environments. This is a problem both of training and design, which is the subject of this article. Design includes both design of the system to be controlled and design of procedures for operating this system. A specific knowledge representation is proposed for representing the corresponding system and operational knowledge. This representation is based on the situation recognition and analytical reasoning paradigm. It tries to make explicit common factors involved in both human and machine intelligence, including perception and reasoning. An OA system based on this representation has been developed for space telerobotics. Simulations have been carried out with astronauts and the resulting protocols have been analyzed. Results show the relevance of the approach and have been used for improving the knowledge representation and the OA architecture.

Toward Synthesis, Analysis, and Certification of Security Protocols

NASA Technical Reports Server (NTRS)

Schumann, Johann

2004-01-01

Implemented security protocols are basically pieces of software which are used to (a) authenticate the other communication partners, (b) establish a secure communication channel between them (using insecure communication media), and (c) transfer data between the communication partners in such a way that these data only available to the desired receiver, but not to anyone else. Such an implementation usually consists of the following components: the protocol-engine, which controls in which sequence the messages of the protocol are sent over the network, and which controls the assembly/disassembly and processing (e.g., decryption) of the data. the cryptographic routines to actually encrypt or decrypt the data (using given keys), and t,he interface to the operating system and to the application. For a correct working of such a security protocol, all of these components must work flawlessly. Many formal-methods based techniques for the analysis of a security protocols have been developed. They range from using specific logics (e.g.: BAN-logic [4], or higher order logics [12] to model checking [2] approaches. In each approach, the analysis tries to prove that no (or at least not a modeled intruder) can get access to secret data. Otherwise, a scenario illustrating the &tack may be produced. Despite the seeming simplicity of security protocols ("only" a few messages are sent between the protocol partners in order to ensure a secure communication), many flaws have been detected. Unfortunately, even a perfect protocol engine does not guarantee flawless working of a security protocol, as incidents show. Many break-ins and security vulnerabilities are caused by exploiting errors in the implementation of the protocol engine or the underlying operating system. Attacks using buffer-overflows are a very common class of such attacks. Errors in the implementation of exception or error handling can open up additional vulnerabilities. For example, on a website with a log-in screen: multiple tries with invalid passwords caused the expected error message (too many retries). but let the user nevertheless pass. Finally, security can be compromised by silly implementation bugs or design decisions. In a commercial VPN software, all calls to the encryption routines were incidentally replaced by stubs, probably during factory testing. The product worked nicely. and the error (an open VPN) would have gone undetected, if a team member had not inspected the low-level traffic out of curiosity. Also, the use secret proprietary encryption routines can backfire, because such algorithms often exhibit weaknesses which can be exploited easily (see e.g., DVD encoding). Summarizing, there is large number of possibilities to make errors which can compromise the security of a protocol. In today s world with short time-to-market and the use of security protocols in open and hostile networks for safety-critical applications (e.g., power or air-traffic control), such slips could lead to catastrophic situations. Thus, formal methods and automatic reasoning techniques should not be used just for the formal proof of absence of an attack, but they ought to be used to provide an end-to-end tool-supported framework for security software. With such an approach all required artifacts (code, documentation, test cases) , formal analyses, and reliable certification will be generated automatically, given a single, high level specification. By a combination of program synthesis, formal protocol analysis, certification; and proof-carrying code, this goal is within practical reach, since all the important technologies for such an approach actually exist and only need to be assembled in the right way.

Molecular biomimetics: GEPI-based biological routes to technology.

PubMed

Tamerler, Candan; Khatayevich, Dmitriy; Gungormus, Mustafa; Kacar, Turgay; Oren, E Emre; Hnilova, Marketa; Sarikaya, Mehmet

2010-01-01

In nature, the viability of biological systems is sustained via specific interactions among the tens of thousands of proteins, the major building blocks of organisms from the simplest single-celled to the most complex multicellular species. Biomolecule-material interaction is accomplished with molecular specificity and efficiency leading to the formation of controlled structures and functions at all scales of dimensional hierarchy. Through evolution, Mother Nature developed molecular recognition by successive cycles of mutation and selection. Molecular specificity of probe-target interactions, e.g., ligand-receptor, antigen-antibody, is always based on specific peptide molecular recognition. Using biology as a guide, we can now understand, engineer, and control peptide-material interactions and exploit them as a new design tool for novel materials and systems. We adapted the protocols of combinatorially designed peptide libraries, via both cell surface or phage display methods; using these we select short peptides with specificity to a variety of practical materials. These genetically engineered peptides for inorganics (GEPI) are then studied experimentally to establish their binding kinetics and surface stability. The bound peptide structure and conformations are interrogated both experimentally and via modeling, and self-assembly characteristics are tested via atomic force microscopy. We further engineer the peptide binding and assembly characteristics using a computational biomimetics approach where bioinformatics based peptide-sequence similarity analysis is developed to design higher generation function-specific peptides. The molecular biomimetic approach opens up new avenues for the design and utilization of multifunctional molecular systems in a wide-range of applications from tissue engineering, disease diagnostics, and therapeutics to various areas of nanotechnology where integration is required among inorganic, organic and biological materials. Here, we describe lessons from biology with examples of protein-mediated functional biological materials, explain how novel peptides can be designed with specific affinity to inorganic solids using evolutionary engineering approaches, give examples of their potential utilizations in technology and medicine, and, finally, provide a summary of challenges and future prospects. (c) 2010 Wiley Periodicals, Inc.

Design, Specification, and Synthesis of Aircraft Electric Power Systems Control Logic

NASA Astrophysics Data System (ADS)

Xu, Huan

Cyber-physical systems integrate computation, networking, and physical processes. Substantial research challenges exist in the design and verification of such large-scale, distributed sensing, actuation, and control systems. Rapidly improving technology and recent advances in control theory, networked systems, and computer science give us the opportunity to drastically improve our approach to integrated flow of information and cooperative behavior. Current systems rely on text-based specifications and manual design. Using new technology advances, we can create easier, more efficient, and cheaper ways of developing these control systems. This thesis will focus on design considerations for system topologies, ways to formally and automatically specify requirements, and methods to synthesize reactive control protocols, all within the context of an aircraft electric power system as a representative application area. This thesis consists of three complementary parts: synthesis, specification, and design. The first section focuses on the synthesis of central and distributed reactive controllers for an aircraft elec- tric power system. This approach incorporates methodologies from computer science and control. The resulting controllers are correct by construction with respect to system requirements, which are formulated using the specification language of linear temporal logic (LTL). The second section addresses how to formally specify requirements and introduces a domain-specific language for electric power systems. A software tool automatically converts high-level requirements into LTL and synthesizes a controller. The final sections focus on design space exploration. A design methodology is proposed that uses mixed-integer linear programming to obtain candidate topologies, which are then used to synthesize controllers. The discrete-time control logic is then verified in real-time by two methods: hardware and simulation. Finally, the problem of partial observability and dynamic state estimation is explored. Given a set placement of sensors on an electric power system, measurements from these sensors can be used in conjunction with control logic to infer the state of the system.

Bringing memory fMRI to the clinic: comparison of seven memory fMRI protocols in temporal lobe epilepsy.

PubMed

Towgood, Karren; Barker, Gareth J; Caceres, Alejandro; Crum, William R; Elwes, Robert D C; Costafreda, Sergi G; Mehta, Mitul A; Morris, Robin G; von Oertzen, Tim J; Richardson, Mark P

2015-04-01

fMRI is increasingly implemented in the clinic to assess memory function. There are multiple approaches to memory fMRI, but limited data on advantages and reliability of different methods. Here, we compared effect size, activation lateralisation, and between-sessions reliability of seven memory fMRI protocols: Hometown Walking (block design), Scene encoding (block design and event-related design), Picture encoding (block and event-related), and Word encoding (block and event-related). All protocols were performed on three occasions in 16 patients with temporal lobe epilepsy (TLE). Group T-maps showed activity bilaterally in medial temporal lobe for all protocols. Using ANOVA, there was an interaction between hemisphere and seizure-onset lateralisation (P = 0.009) and between hemisphere, protocol and seizure-onset lateralisation (P = 0.002), showing that the distribution of memory-related activity between left and right temporal lobes differed between protocols and between patients with left-onset and right-onset seizures. Using voxelwise intraclass Correlation Coefficient, between-sessions reliability was best for Hometown and Scenes (block and event). The between-sessions spatial overlap of activated voxels was also greatest for Hometown and Scenes. Lateralisation of activity between hemispheres was most reliable for Scenes (block and event) and Words (event). Using receiver operating characteristic analysis to explore the ability of each fMRI protocol to classify patients as left-onset or right-onset TLE, only the Words (event) protocol achieved a significantly above-chance classification of patients at all three sessions. We conclude that Words (event) protocol shows the best combination of between-sessions reliability of the distribution of activity between hemispheres and reliable ability to distinguish between left-onset and right-onset patients. © 2015 The Authors Human Brain Mapping Published by Wiley Periodicals, Inc.

Method- and species-specific detection probabilities of fish occupancy in Arctic lakes: Implications for design and management

USGS Publications Warehouse

Haynes, Trevor B.; Rosenberger, Amanda E.; Lindberg, Mark S.; Whitman, Matthew; Schmutz, Joel A.

2013-01-01

Studies examining species occurrence often fail to account for false absences in field sampling. We investigate detection probabilities of five gear types for six fish species in a sample of lakes on the North Slope, Alaska. We used an occupancy modeling approach to provide estimates of detection probabilities for each method. Variation in gear- and species-specific detection probability was considerable. For example, detection probabilities for the fyke net ranged from 0.82 (SE = 0.05) for least cisco (Coregonus sardinella) to 0.04 (SE = 0.01) for slimy sculpin (Cottus cognatus). Detection probabilities were also affected by site-specific variables such as depth of the lake, year, day of sampling, and lake connection to a stream. With the exception of the dip net and shore minnow traps, each gear type provided the highest detection probability of at least one species. Results suggest that a multimethod approach may be most effective when attempting to sample the entire fish community of Arctic lakes. Detection probability estimates will be useful for designing optimal fish sampling and monitoring protocols in Arctic lakes.

Cross-layer protocol design for QoS optimization in real-time wireless sensor networks

NASA Astrophysics Data System (ADS)

Hortos, William S.

2010-04-01

The metrics of quality of service (QoS) for each sensor type in a wireless sensor network can be associated with metrics for multimedia that describe the quality of fused information, e.g., throughput, delay, jitter, packet error rate, information correlation, etc. These QoS metrics are typically set at the highest, or application, layer of the protocol stack to ensure that performance requirements for each type of sensor data are satisfied. Application-layer metrics, in turn, depend on the support of the lower protocol layers: session, transport, network, data link (MAC), and physical. The dependencies of the QoS metrics on the performance of the higher layers of the Open System Interconnection (OSI) reference model of the WSN protocol, together with that of the lower three layers, are the basis for a comprehensive approach to QoS optimization for multiple sensor types in a general WSN model. The cross-layer design accounts for the distributed power consumption along energy-constrained routes and their constituent nodes. Following the author's previous work, the cross-layer interactions in the WSN protocol are represented by a set of concatenated protocol parameters and enabling resource levels. The "best" cross-layer designs to achieve optimal QoS are established by applying the general theory of martingale representations to the parameterized multivariate point processes (MVPPs) for discrete random events occurring in the WSN. Adaptive control of network behavior through the cross-layer design is realized through the parametric factorization of the stochastic conditional rates of the MVPPs. The cross-layer protocol parameters for optimal QoS are determined in terms of solutions to stochastic dynamic programming conditions derived from models of transient flows for heterogeneous sensor data and aggregate information over a finite time horizon. Markov state processes, embedded within the complex combinatorial history of WSN events, are more computationally tractable and lead to simplifications for any simulated or analytical performance evaluations of the cross-layer designs.

Continuous-variable quantum-key-distribution protocols with a non-Gaussian modulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leverrier, Anthony; Grangier, Philippe; Laboratoire Charles Fabry, Institut d'Optique, CNRS, Univ. Paris-Sud, Campus Polytechnique, RD 128, F-91127 Palaiseau Cedex

2011-04-15

In this paper, we consider continuous-variable quantum-key-distribution (QKD) protocols which use non-Gaussian modulations. These specific modulation schemes are compatible with very efficient error-correction procedures, hence allowing the protocols to outperform previous protocols in terms of achievable range. In their simplest implementation, these protocols are secure for any linear quantum channels (hence against Gaussian attacks). We also show how the use of decoy states makes the protocols secure against arbitrary collective attacks, which implies their unconditional security in the asymptotic limit.

Security analysis of standards-driven communication protocols for healthcare scenarios.

PubMed

Masi, Massimiliano; Pugliese, Rosario; Tiezzi, Francesco

2012-12-01

The importance of the Electronic Health Record (EHR), that stores all healthcare-related data belonging to a patient, has been recognised in recent years by governments, institutions and industry. Initiatives like the Integrating the Healthcare Enterprise (IHE) have been developed for the definition of standard methodologies for secure and interoperable EHR exchanges among clinics and hospitals. Using the requisites specified by these initiatives, many large scale projects have been set up for enabling healthcare professionals to handle patients' EHRs. The success of applications developed in these contexts crucially depends on ensuring such security properties as confidentiality, authentication, and authorization. In this paper, we first propose a communication protocol, based on the IHE specifications, for authenticating healthcare professionals and assuring patients' safety. By means of a formal analysis carried out by using the specification language COWS and the model checker CMC, we reveal a security flaw in the protocol thus demonstrating that to simply adopt the international standards does not guarantee the absence of such type of flaws. We then propose how to emend the IHE specifications and modify the protocol accordingly. Finally, we show how to tailor our protocol for application to more critical scenarios with no assumptions on the communication channels. To demonstrate feasibility and effectiveness of our protocols we have fully implemented them.

Design and Development of a Portable WiFi enabled BIA device

NASA Astrophysics Data System (ADS)

Križaj, D.; Baloh, M.; Brajkovič, R.; Žagar, T.

2013-04-01

A bioimpedance device (BIA) for evaluation of sarcopenia - age related muscle mass loss - is designed, developed and evaluated. The requirements were based on lightweight design, flexible and user enabled incorporation of measurement protocols and WiFi protocol for remote device control, full internet integration and fast development and usage of measurement protocols. The current design is based on usage of a microcontroller with integrated AD/DA converters. The prototype system was assembled and the operation and connectivity to different handheld devices and laptop computers was successfully tested. The designed BIA device can be accessed using TCP sockets and once the connection is established the data transfer runs successfully at the specified speed. The accuracy of currently developed prototype is about 5% for the impedance modulus and 5 deg. for the phase for the frequencies below 20 kHz with an unfiltered excitation signal and no additional amplifiers employed.

Whole Building Cost and Performance Measurement: Data Collection Protocol Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fowler, Kimberly M.; Spees, Kathleen L.; Kora, Angela R.

2009-03-27

This protocol was written for the Department of Energy’s Federal Energy Management Program (FEMP) to be used by the public as a tool for assessing building cost and performance measurement. The primary audiences are sustainable design professionals, asset owners, building managers, and research professionals within the Federal sector. The protocol was developed based on the need for measured performance and cost data on sustainable design projects. Historically there has not been a significant driver in the public or private sector to quantify whole building performance in comparable terms. The deployment of sustainable design into the building sector has initiated manymore » questions on the performance and operational cost of these buildings.« less

A protocol of rope skipping exercise for primary school children: A pilot test

NASA Astrophysics Data System (ADS)

Radzi, A. N. M.; Rambely, A. S.; Chellapan, K.

2014-06-01

This paper aims to investigate the methods and sample used in rope skipping as an exercise approach. A systematic literature review was approached in identifying skipping performance in the related researches. The methods were compared to determine the best methodological approach for the targeted skipping based research measure. A pilot test was performed among seven students below 12 years old. As the outcome of the review, a skipping protocol design has been proposed for 10 years old primary school students. The proposed protocol design is to be submitted to PPUKM Ethical Committee for approval prior to its implementation in investigation memory enhancement in relation to designed skipping activities.

[Study protocol of a prevention of recurrent suicidal behaviour program based on case management (PSyMAC)].

PubMed

Sáiz, Pilar A; Rodríguez-Revuelta, Julia; González-Blanco, Leticia; Burón, Patricia; Al-Halabí, Susana; Garrido, Marlen; García-Alvarez, Leticia; García-Portilla, Paz; Bobes, Julio

2014-01-01

Prevention of suicidal behaviour is a public health priority in the European Union. A previous suicide attempt is the best risk predictor for future attempts, as well as completed suicides. The primary aim of this article is to describe a controlled study protocol designed for prevention of recurrent suicidal behaviour that proposes case management, and includes a psychoeducation program, as compared with the standard intervention (PSyMAC). Patients admitted from January 2011 to June 2013 to the emergency room of the Hospital Universitario Central de Asturias were evaluated using a protocol including sociodemographic, psychiatric, and psychosocial assessment. Patients were randomly assigned to either a group receiving continuous case management including participation in a psychoeducation program (experimental group), or a control group receiving standard care. The primary objective is to examine whether or not the period of time until recurrent suicidal behaviour in the experimental group is significantly different from that of the control group. PSyMAC proposes low cost and easily adaptable interventions to the usual clinical setting that can help to compensate the shortcoming of specific action protocols and suicidal behaviour prevention programs in our country. The evaluation of PSyMAC results will determine their real effectivity as a case-magament program to reduce suicidal risk. Copyright © 2013 SEP y SEPB. Published by Elsevier España. All rights reserved.

Zebrafish embryology and cartilage staining protocols for high school students.

PubMed

Emran, Farida; Brooks, Jacqueline M; Zimmerman, Steven R; Johnson, Susan L; Lue, Robert A

2009-06-01

The Life Sciences-Howard Hughes Medical Institute Outreach Program at Harvard University supports high school science education by offering an on-campus program for students and their teachers to participate in investigative, hands-on laboratory sessions. The outreach program has recently designed and launched a successful zebrafish embryology protocol that we present here. The main objectives of this protocol are to introduce students to zebrafish as a model research organism and to provide students with direct experience with current techniques used in embryological research. The content of the lab is designed to generate discussions on embryology, genetics, fertilization, natural selection, and animal adaptation. The protocol produces reliable results in a time-efficient manner using a minimum of reagents. The protocol presented here consists of three sections: observations of live zebrafish larvae at different developmental stages, cartilage staining of zebrafish larvae, and a mutant hunt involving identification of two zebrafish mutants (nacre and chokh). Here, we describe the protocol, show the results obtained for each section, and suggest possible alternatives for different lab settings.