Efficacy of stapler versus hand-sewn closure after distal pancreatectomy (DISPACT): a randomised, controlled multicentre trial.

PubMed

Diener, Markus K; Seiler, Christoph M; Rossion, Inga; Kleeff, Jörg; Glanemann, Matthias; Butturini, Giovanni; Tomazic, Ales; Bruns, Christiane J; Busch, Olivier R C; Farkas, Stefan; Belyaev, Orlin; Neoptolemos, John P; Halloran, Christopher; Keck, Tobias; Niedergethmann, Marco; Gellert, Klaus; Witzigmann, Helmut; Kollmar, Otto; Langer, Peter; Steger, Ulrich; Neudecker, Jens; Berrevoet, Frederik; Ganzera, Silke; Heiss, Markus M; Luntz, Steffen P; Bruckner, Thomas; Kieser, Meinhard; Büchler, Markus W

2011-04-30

The ideal closure technique of the pancreas after distal pancreatectomy is unknown. We postulated that standardised closure with a stapler device would prevent pancreatic fistula more effectively than would a hand-sewn closure of the remnant. This multicentre, randomised, controlled, parallel group-sequential superiority trial was done in 21 European hospitals. Patients with diseases of the pancreatic body and tail undergoing distal pancreatectomy were eligible and were randomly assigned by central randomisation before operation to either stapler or hand-sewn closure of the pancreatic remnant. Surgical performance was assessed with intraoperative photo documentation. The primary endpoint was the combination of pancreatic fistula and death until postoperative day 7. Patients and outcome assessors were masked to group assignment. Interim and final analysis were by intention to treat in all patients in whom a left resection was done. This trial is registered, ISRCTN18452029. Between Nov 16, 2006, and July 3, 2009, 450 patients were randomly assigned to treatment groups (221 stapler; 229 hand-sewn closure), of whom 352 patients (177 stapler, 175 hand-sewn closure) were analysed. Pancreatic fistula rate or mortality did not differ between stapler (56 [32%] of 177) and hand-sewn closure (49 [28%] of 175; OR 0·84, 95% CI 0·53–1·33; p=0·56). One patient died within the fi rst 7 days after surgery in the hand-sewn group; no deaths occurred in the stapler group. Serious adverse events did not differ between groups. Stapler closure did not reduce the rate of pancreatic fistula compared with hand-sewn closure for distal pancreatectomy. New strategies, including innovative surgical techniques, need to be identified to reduce this adverse outcome. German Federal Ministry of Education and Research.

[Possible cost reduction and better surgical results using EEA stapler in tumors of the upper rectum].

PubMed

Coda, A; Ferri, F

1990-01-01

The aim of this work was to compare the relative costs and outcome of the anterior resection of the rectum for upper rectal cancer mechanically or manually performed. Therefore, the last two manual sutures and the first two cases operated using mechanical sutures were taken into account. Patients were homogenous for age, general conditions and cancer stage. Upper rectal location was choosen for the comparison considering the use of stapler not essential in this site. Analysis of the course showed no complications, shorter hospitalization, reduced drug therapy, and fewer diagnostic procedures needed in patients operated on with staplers. Although these data have no statistical rank, better surgical results and remarkable saving in social costs were observed with the use of stapling devices.

Totally laparoscopic gastrectomy using intracorporeally stapler or hand-sewn anastomosis for gastric cancer: a single-center experience of 478 consecutive cases and outcomes.

PubMed

Chen, Ke; Wu, Di; Pan, Yu; Cai, Jia-Qin; Yan, Jia-Fei; Chen, Ding-Wei; Maher, Hendi; Mou, Yi-Ping

2016-04-19

Totally laparoscopic gastrectomy (TLG) using intracorporeal anastomosis has gradually become mature thanks to the advancements of laparoscopic surgical instruments and the accumulation of operative experience. The goal of this study is to review our institution's experience with TLG for the treatment of gastric cancer. A retrospective study was conducted to examine the short-term outcomes of TLG using intracorporeally stapler or hand-sewn anastomosis performed at Sir Run Run Shaw Hospital between March 2007 and June 2015. The details of intracorporeal anastomosis were described, and the clinicopathological data, surgical outcomes, and postoperative complications were evaluated. Four hundred seventy-eight patients were included in the study. Generally speaking, the patients could be divided into stapler or hand-sewn groups according to whether intracorporeal anastomosis was performed by only hand-sewn technique (n = 97) or only stapling devices (n = 381). For overall patients, the mean operation time and anastomotic time were 225.7 and 30.0 min, respectively. Postoperative complications were observed in 65 patients. All of the patients recovered well without perioperative death by conservative or surgical management. TLG using intracorporeally stapler or hand-sewn anastomosis is a reasonable option for the treatment of gastric cancer, with early data showing acceptable perioperative outcomes.

[Intraoperational and postoperational complications of colo-rectal anastomosis prepared by classical and stapler techniques].

PubMed

Pasić, Fuad; Hasukić, Sefik; Serak, S; Mehmedagić, I; Mesić, Deso

2008-01-01

Resectional surgery on rectum, finishing with continued colo-rectal anastomosis by the classical manual technique, were burdened by a great number of post surgery complications of dehiscentio over 60%. If we take into reconsideration a high number of mortality 5-20% then we have valid reasons for developing modern and safer methods of surgical intervention of these patients. Two groups of 60 patients each, have been analyzed. They have been operated at the Surgical clinic University Clinical Center Tuzla because of rectum malignancy. The first group of patients where the colo-rectal anastomosis was manually operated was done between 1995-1998. In the second group of the patients being operated, colorectal continuity was done by stapler. The patients were operated in time period 2001-2002. The medium evaluation time was 20 months, for each group. All the patients were operated in elective programme, after endoscopic treatment and ph diagnosis done. The patients from the both analyzed groups were operated by the same surgeons. Preoperational procedure and postoperational observation was fullfilled according to the unified protocol. The patients with their colo-rectal continuity having been by stapler had a shorter surgery time, and less transfusion of blood. They had less ureter lesion. Also they have got a shorter hospitalization time with less number of anastomotic complications. Dehiscenc as well as bleeding. The patients with colorectal anastomosis made manually had more repeated surgeries. The patients from the manual group of the surgeries had more anastomotic relapses. The difference in the number of post operational strictures in both analyzed groups was not noticed. The patients with stapler colorectal anastomosis had no mortality. The manual group had one lethal case. The important thing that is noticed is a larger number of stapler colorectal anastomosis, not because of the illnes incidence increase but decrease of abdominoperineal rectum amputation. The patients have been safely operated from the oncologic point of wiev. They have continuing anastomosis which was not burdened with a larger number of morbidity and mortality. This was possible to do by improving surgical strategy and technique and introduction of stapler in every day surgical practice.

Current Developments and Unusual Aspects in Gastrointestinal Surgical Stapling.

PubMed

Frattini, Francesco; Amico, Francesco; Rausei, Stefano; Boni, Luigi; Rovera, Francesca; Dionigi, Gianlorenzo

2015-11-01

Stapling devices are used in gastrointestinal, gynecologic, thoracic, and many other surgeries to resect organs, transect tissues, and anastomose different structures. These devices became widely accepted standard practice in many gastrointestinal operations, especially since the successful advent of minimally invasive surgery. Despite the relevant advantages related to the use of a surgical stapler, we must also consider that these instruments may be at risk of failure. When any component fails, the patient is at risk of operative morbidity. Gastrointestinal surgical stapling technique still needs refinement in order to increase its reliability. Staple line reinforcement has been widely used and seems to effectively reduce anastomotic complications. Literature provides us with examples of studies supporting both bleeding and leakage reduction after staple line reinforcement, but high-quality evidence is not available to date. Semi-absorbable and nonabsorbable materials have been the earliest available. The use of bioabsorbable staple line reinforcement materials has recently become more widespread, and these materials are more widely used these days. Powered staplers were made available to the market some time ago and represent a rather unheard of aspect of endosurgical stapling. Despite powered staples being supposedly convenient compared with manual ones only one relevant article was found when searching the U.S. National Library of Medicine for "powered stapler." New surgical stapling devices are constantly developed and introduced on the market. Results with such devices depend on the stapler features but also surely vary according to the surgeon experience.

Stump closure of a thick pancreas using stapler closure increases pancreatic fistula after distal pancreatectomy.

PubMed

Kawai, Manabu; Tani, Masaji; Okada, Ken-ichi; Hirono, Seiko; Miyazawa, Motoki; Shimizu, Astusi; Kitahata, Yuji; Yamaue, Hiroki

2013-09-01

The appropriate surgical stump closure after distal pancreatectomy (DP) is still controversial. This study investigated the benefits and risks of stapler closure during DP. The risk factors of pancreatic fistulas were investigated in 122 DPs among 3 types of stump closure: hand-sewn suture (n = 32), bipolar scissors (n = 45), and stapler closure (n = 45). There was no significant difference in the incidence of pancreatic fistula between the 3 types of stump closure (hand-sewn suture [44%] vs bipolar scissors [37.7%] vs stapler closure [35.5%]). By using receiver operating characteristics curves, 12 mm was the best cutoff value of the thickness of the pancreas for pancreatic fistulas after DP using stapler closure. Three factors (ie, male sex, body mass index >25 kg/m(2), and stapler closure) were independent risk factors of pancreatic fistulas after DP with a pancreas thicker than 12 mm. A pancreas thicker than 12 mm significantly increased the incidence of pancreatic fistulas after DP using stapler closure. Copyright © 2013 Elsevier Inc. All rights reserved.

Laparoscopic colorectal anastomosis using the novel Chex(®) circular stapler: a case-control study.

PubMed

Maggiori, L; Bretagnol, F; Ferron, M; Chevalier, Y; Panis, Y

2011-06-01

The purpose of this study was to assess the safety and effectiveness of a new cost-effective circular stapler for colorectal anastomosis, the Chex(®) CS. From 2007 to 2009, a case-control study was conducted of 54 patients who underwent left colectomy with stapled anastomosis using the Chex stapler. The patients were matched to 64 patients in whom the anastomoses were performed using the CDH(®) stapler or the EEA(®) stapler. The following criteria were matched: sex, age, body mass index, American Society of Anesthesiology grade, diagnosis, formation of a temporary stoma and surgical approach. Primary end-points were postoperative mortality and morbidity. The surgeon was asked to fill out a questionnaire to assess the ergonomics of the device using an analogue visual scale. A cost analysis was performed to compare the cost of the different devices. There were no postoperative deaths. Morbidity, including anastomotic leakage (9%vs 8%, P = 1.000), was similar in the two groups. The surgeon's overall appreciation was scored at 8.1/10 (3-9.5), including the best score for stapler removal (9.5). No major device failure was observed during the study. Mean surgical costs were significantly lower in the Chex group: € 903 ± 73 (885-1192) vs the control group € 971 ± 61 (956-1263) (P < 0.0001). This study suggests that colorectal anastomosis using the Chex circular stapler is safe and does not increase overall morbidity. In particular, this device did not have a higher rate of anastomotic leakage in our patients than more expensive models currently used in our hospital. © 2011 The Authors. Colorectal Disease © 2011 The Association of Coloproctology of Great Britain and Ireland.

Influence of multiple stapler firings used for rectal division on colorectal anastomotic leak rate.

PubMed

Braunschmid, Tamara; Hartig, Nikolaus; Baumann, Lukas; Dauser, Bernhard; Herbst, Friedrich

2017-12-01

Anastomotic leakage following colorectal resection remains one of the most significant complications with relevant morbidity and mortality. There is evidence that a higher number of stapler firings for rectal division can affect the leak rate in double stapling anastomosis. However, there are no data concerning compression anastomosis. We present our institutional experience addressing this issue. This is a retrospective review of a prospective institutional database of patients undergoing colonic and rectal resection for benign and malignant indications between January 2008 and December 2014 at the surgical department of the St. John of God Hospital, Vienna. Inclusion criteria were rectal division with linear stapling devices and construction of anastomosis to the rectal stump using a circular stapler or compression device. Three hundred eighty two (196 female; 51.3%) patients were included. Mean age was 65.8 years (range: 18-95) Indications for the operation included diverticular disease (44.8%), colorectal carcinoma (51.6%), inflammatory bowel disease (1.8%), and adenoma (1.8%). A laparoscopic approach was employed in 334 cases (87.4%); in 170 patients (44.9%), a compression anastomosis was created. One, two, and three or more stapler cartridges were used for rectal division in 58.4, 33.5, and 8.1%, respectively. Male gender, neoadjuvant therapy, rectal cancer as an underlying disease, laparoscopic surgical approach, and duration of operation longer than 200 min are leading causes for the usage of more than one stapler cartridge. Overall leak rate was 4.7% (18/382). The only factor associated with the occurrence of leakage was the use of three or more stapler cartridges for the closure of the rectal stump (p = 0.002). Our data support that multiple stapler firings for rectal division following colorectal resection has a major impact on anastomotic leak rate. Especially in laparoscopic surgery efforts should be made to minimize the number of stapler cartridges used.

Gastrointestinal surgery in gynecologic oncology: evaluation of surgical techniques.

PubMed

Penalver, M; Averette, H; Sevin, B U; Lichtinger, M; Girtanner, R

1987-09-01

In recent years, the use of surgical staples has become popular in all subspecialties of surgery. The advantages proposed have been a decrease in operative time and morbidity. This paper reviews the University of Miami/Jackson Memorial Medical Center, Division of Gynecologic Oncology experience with the use of surgical staples in gastrointestinal surgery on patients with a diagnosis of a gynecologic malignancy. Between January 1, 1979 and July 1, 1985, a total of 152 procedures were done, 81 by stapler and 71 by suture anastomosis. Ninety-one patients had received previous radiation or chemotherapy. The average age of the patients was 52 years. The results show a decrease in operating time, blood loss, and postoperative hospital stay in those patients where the stapler anastomosis was used. The postoperative morbidity and mortality were not increased. Twenty-seven total pelvic exenterations were performed during the period of study and they were evaluated separately. The hospital stay and blood loss as well as the operative time were significantly less using staplers. This report includes a detailed evaluation of the results. From this study, we concluded that surgical staples are a safe alternative in gastrointestinal surgery in patients with a gynecologic malignancy.

Different characteristics of circular staplers make the difference in anastomotic tensile strength.

PubMed

Giaccaglia, V; Antonelli, M S; Franceschilli, L; Salvi, P F; Gaspari, A L; Sileri, P

2016-01-01

Anastomotic leak after gastrointestinal surgery is a severe complication associated with relevant short and long-term sequelae. Most of the anastomoses are currently performed with a surgical stapler that is required to have appropriate characteristics in order to guarantee good performances. The aim of our study was to evaluate, ex vivo, pressure resistance and tensile strength of anastomosis performed with different circular staplers available in the market. We studied 7 circular staplers of 3 different companies, 3 of them used for gastrointestinal anastomosis and 4 staplers for hemorrhoidal prolapse excision. A total of 350 anastomoses, 50 for each of the 7 staplers, were performed using healthy pig fresh intestine, then injected saline solution and recorded the leaking pressure. There were no statistically significant differences between the mean pressure necessary to induce an anastomotic leak in the various instruments (p>0.05). For studying tensile strength, we performed a total of 350 anastomoses with 7 different circular staplers on a special strong paper (Tyvek), and then recorded the maximal tensile force that could open the anastomosis. There were statistically significant differences between one brand stapler vs other 2 companies staplers about the strength necessary to open the staple line (p<0.05). In conclusion, we demonstrated that different circular staplers of three companies available in the market give comparable anastomotic pressure resistance but different tensile strengths. This is probably due to different technical characteristics. Copyright © 2015 Elsevier Ltd. All rights reserved.

Performance of da Vinci Stapler during robotic-assisted right colectomy with intracorporeal anastomosis.

PubMed

Johnson, Craig S; Kassir, Andrew; Marx, Daryl S; Soliman, Mark K

2018-05-30

Applications for surgical staplers continue to grow, due to the increase in minimally invasive surgical approaches, and range from vessel ligation to tissue transection and anastomoses. Complications associated with stapled tissue, such as bleeding or leaks, continue to be a concern for surgeons, as both can be associated with prolonged operative times and can contribute to postoperative morbidity and mortality. The goal of this retrospective study was to evaluate the performance of the da Vinci ® Xi EndoWrist ® Stapler 45 with SmartClamp™ technology during robotic-assisted right colectomy with intracorporeal anastomosis. We reviewed 113 consecutive cases from four medical centers. Preclinical diagnoses were inflammatory bowel disease (IBD) (n = 5), benign bowel disease (n = 77), and malignant bowel disease (n = 31). No anastomotic leaks occurred; one event of anastomotic bleeding (0.88%) resolved without surgical intervention. Overall, there were 643 clamp attempts (5.7 attempts per case), and 570 fires (5.0 fires per case). SmartClamp™ occurrences happened in approximately one out of three cases, with the highest proportion of occurrences in the IBD group (2.0 occurrences per case). The most commonly fired reload was blue (1.5 mm closed height) with 4.1 blue reloads fired per case overall. No incomplete fires occurred during the procedures. The study data demonstrate the performance of the da Vinci Xi EndoWrist ® Stapler 45 as used in right colon resection with intracorporeal anastomosis. The collection and analysis of these data provide surgeons with information related to stapler firings, which were not previously available; as such, this analysis may lead to deductions that are useful for intraoperative decision-making and clinical outcomes.

Hypopharyngeal reconstruction using a circular stapler.

PubMed

Schultz, P; Dupret-Bories, A; Ciftci, S; Fath, L

2018-02-01

Distal anastomosis by tubed free flap is one of the main technical difficulties encountered during hypopharyngeal reconstruction. Although high flap survival probability can be achieved by experienced surgical teams, two complications are commonly observed at the flap-oesophagus junction: fistula and stenosis. Use of a circular stapler reduced the frequency of these complications by ensuring a perfectly circular and resistant suture line. Salivary stent placement is therefore unnecessary, allowing earlier resumption of feeding. The stapling procedure is simple, but a few technical skills are required, as the stapler is not specifically designed for this purpose. We describe the indications, surgical procedure and global results based on our series. We consider the forearm flap to be the gold standard for this reconstruction, but thicker flaps, such as pectoralis major flap, can also be used, but with poorer results in terms of healing and swallowing performance. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Antesternal pharyngogastrostomy by oral insertion of a stapler.

PubMed

Tanaka, T; Sato, H; Sakabe, T

1984-03-01

Cancer of the hypopharynx and cervical esophagus involve problems such as removal of the cervical region, resection of the esophagus and also esophageal reconstruction. A standard surgical procedure has not been established. In our clinic, surgery is performed by two teams; one for head and neck and the other for the digestive tract. Since 1963, we have performed 22 operations on patients with such cancers; resection of the cancer and reconstruction of the alimentary tract were performed in sixteen 16 patients and palliative operations in six. As procedures of reconstructive surgery, antesternal pharyngogastrostomy was performed in ten patients, and antesternal esophagogastrostomy in one. Six of these reconstructions were carried out with oral insertion of a stapler. In this paper, we present the surgical techniques and some of the problems involved in total esophagectomy without thoracotomy, i.e., blunt dissection of the esophagus and antesternal pharyngogastrostomy, particularly pharyngogastrostomy, using a stapler inserted orally.

[Use of surgical staplers in gastrointestinal surgery].

PubMed

Lorenz, D; Siemer, P; Maskow, G; Petermann, J

1988-01-01

Reported in this paper is the use of staplers in gastro-intestinal surgery. Three soviet-made types of staplers, UO 40/60, NShKA, and SPTU (comparable to TA 30/55/90, GIA, and EEA) were used on the upper part of the gastro-intestinal tract in 237 cases and in colorectal surgery on 66 patients. The UO stapler worked well, when used for closure of uncomplicated duodenal stumps, though no absolute indication can be claimed for such application. The SPTU type, on the other hand, proved to be an ideal solution in cases of oesophago-jejunostomy with intrathoracic localisation of the anastomosis. Another, nearly absolute indication for the use of the SPTU can be claimed for anterior rectum resection (especially in male patients) with narrow pelvis and tense pelvic floor.

A multi-center evaluation of a powered surgical stapler in video-assisted thoracoscopic lung resection procedures in China.

PubMed

Qiu, Bin; Yan, Wanpu; Chen, Keneng; Fu, Xiangning; Hu, Jian; Gao, Shugeng; Knippenberg, Susan; Schwiers, Michael; Kassis, Edmund; Yang, Tengfei

2016-05-01

Lung cancer is one of the most prevalent malignancies worldwide. The number of anatomic lung cancer resections performed via video-assisted thoracoscopic surgery (VATS) is growing rapidly. Staplers are widely used in VATS procedures, but there is limited clinical data regarding how they might affect performance and postoperative outcomes, including air leak. This clinical trial assessed the use of a powered stapler in VATS lung resection, with a primary study endpoint being occurrence and duration of air leak and prolonged air leak (PAL). Data was collected from a single arm, multi-center study in Chinese patients receiving VATS wedge resection or lobectomy. Intra-operative data included surgery duration; cartridge selection for ligation/transection of bronchus, major vessels, and lung parenchyma; staple line interventions; blood loss; and device usage. Post-operative data included air leak assessments, chest tube duration, length of hospital stay, and adverse events (AEs). A total of 94 procedures across four institutions in China were included in the final analysis: 15 wedge resections, 74 lobectomies, and five wedge resections followed by lobectomies. Post-operative air leak occurred in five (5.3%) patients who had lobectomy procedures, with PAL in one (1.1%) patient. Sites were generally consistent relative to cartridge use by tissue type. The incidence of stapler firings requiring surgical interventions was seven out of 550 (1.3%). Surgeons participating in the study were satisfied with the articulation and overall usability of the stapler. The powered staplers make the VATS procedure easier for the surgeons and have achieved intra- and post-operative patient outcomes comparable to those previously reported.

Surgical stapling device-tissue interactions: what surgeons need to know to improve patient outcomes.

PubMed

Chekan, Edward; Whelan, Richard L

2014-01-01

The introduction of both new surgical devices and reengineered existing devices leads to modifications in the way traditional tasks are carried out and allows for the development of new surgical techniques. Each new device has benefits and limitations in regards to tissue interactions that, if known, allow for optimal use. However, most surgeons are unaware of these attributes and, therefore, new device introduction creates a "knowledge gap" that is potentially dangerous. The goal of this review is to present a framework for the study of device- tissue interactions and to initiate the process of "filling in" the knowledge gap via the available literature. Surgical staplers, which are continually being developed, are the focus of this piece. The integrity of the staple line, which depends on adequate tissue compression, is the primary factor in creating a stable anastomosis. This review focuses on published studies that evaluated the creation of stable anastomoses in bariatric, thoracic, and colorectal procedures. Understanding how staplers interact with target tissues is key to improving patient outcomes. It is clear from this review that each tissue type presents unique challenges. The thickness of each tissue varies as do the intrinsic biomechanical properties that determine the ideal compressive force and prefiring compression time for each tissue type. The correct staple height will vary depending on these tissue-specific properties and the tissue pathology. These studies reinforce the universal theme that compression, staple height, tissue thickness, tissue compressibility, and tissue type must all be considered by the surgeon prior to choosing a stapler and cartridge. The surgeon's experience, therefore, is a critical factor. Educational programs need to be established to inform and update surgeons on the characteristics of each stapler. It is hoped that the framework presented in this review will facilitate this process.

[Errors and dangers in use of the surgical stapler in lung surgery].

PubMed

Junginger, T; Walgenbach, S

1989-01-01

The staple closure of the bronchus, like the manual technique, depends on some essential prerequisites: vascular supply, the length and thickness of the bronchial stump, the resection line, the type of stapler and the size of staples used. GIA 55 or 90 instruments allow safe and simple closure of lung parenchyma. Familiarity with the stapling technique is essential for success.

Improving the side-to-side stapled anastomosis: comparison of staplers for robust crotch formation.

PubMed

Kimura, Masahiro; Kuwabara, Yoshiyuki; Taniwaki, Satoshi; Mitsui, Akira; Shibata, Yasuyuki; Ueno, Shuhei

2018-01-01

Few studies have investigated the burst pressure of side-to-side anastomoses comparing different stapling devices that are commercially available. We conducted side-to-side anastomoses with a variety of staplers and compared burst pressure in the crotch of the anastomoses. Nagoya City East Medical Center. We conducted side-to-side anastomoses with 9 staplers with different shapes and forms. Fresh pig small intestines were used. A side-to-side anastomosis was performed between 2 intestine specimens using a linear stapler. The burst pressure of the anastomosis was recorded. In total, 45 staplers were used for this experiment. The site of leakage in all cases was the crotch. Regarding the influence of the number of staple rows, the burst pressure in 3-row staplers was significantly higher than in 2-row staplers. With regard to the relationship between staple height and burst pressure, staples with a height slightly shorter than the intestinal thickness showed the highest burst pressure. In a comparison of staplers with uniform staple heights and stamplers with staples of 3 different heights, the latter had significantly lower burst pressures. Neoveil significantly increased the burst pressure in the crotch and contributed to the highest burst pressure of all the staplers used in this experiment. In this experiment, we defined the important factors that influence burst pressure at the crotch of a stapled, side-to-side anastomosis. These factors include the number of staple rows, the height of the staple compared with the thickness of the tissue, uniformity of staple height, and reinforcement of the staple line. In any surgical case requiring intestinal anastomosis, selection of a stapler is a critical step. Copyright © 2017 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

Pure laparoscopic pancreas parenchymal dissection using CUSA for distal pancreatectomy.

PubMed

Okano, Keiichi; Suto, Hironobu; Oshima, Minoru; Ando, Yasuhisa; Asano, Eisuke; Kishino, Takayoshi; Fujiwara, Masao; Kobara, Hideki; Mori, Hirohito; Masaki, Tsutomu; Suzuki, Yasuyuki

2018-06-05

Although stapler dissection and closure is commonly used for laparoscopic distal pancreatectomy (LDP), it is risky in patients with thick pancreatic parenchyma or titanium allergy. We performed laparoscopic pancreatic parenchymal dissection with cavitron ultrasonic surgical aspirator (CUSA) successfully in a patient with titanium allergy. Slinging the pancreas with nylon tape delineates the surgical plane. Pancreatic parenchyma was transected by CUSA in an almost bloodless field. Pancreatic duct branches and vessels were adequately exposed and dissected with a vessel sealing system. The main pancreatic duct was closed with Hem-O-lock. CUSA is an alternative to stapler dissection during LDP in select patients.

Positive detection of exfoliated colon cancer cells on linear stapler cartridges was associated with depth of tumor invasion and preoperative bowel preparation in colon cancer.

PubMed

Ikehara, Kishiko; Endo, Shungo; Kumamoto, Kensuke; Hidaka, Eiji; Ishida, Fumio; Tanaka, Jun-Ichi; Kudo, Shin-Ei

2016-08-31

The aim of this study was to investigate exfoliated cancer cells (ECCs) on linear stapler cartridges used for anastomotic sites in colon cancer. We prospectively analyzed ECCs on linear stapler cartridges used for anastomosis in 100 colon cancer patients who underwent colectomy. Having completed the functional end-to-end anastomosis, the linear stapler cartridges were irrigated with saline, which was collected for cytological examination and cytological diagnoses were made by board-certified pathologists based on Papanicolaou staining. The detection rate of ECCs on the linear stapler cartridges was 20 %. Positive detection of ECCs was significantly associated with depth of tumor invasion (p = 0.012) and preoperative bowel preparation (p = 0.003). There were no marked differences between ECC-positive and ECC-negative groups in terms of the operation methods, tumor location, histopathological classification, and surgical margins. Since ECCs were identified on the cartridge of the linear stapler used for anastomosis, preoperative mechanical bowel preparation using polyethylene glycol solution and cleansing at anastomotic sites using tumoricidal agents before anastomosis may be necessary to decrease ECCs in advanced colon cancer.

Lap-Protector and Circular Stapler Are Useful in Cystogastrostomy for Large Pancreatic Pseudocyst with Severe Infection

PubMed Central

Kadowaki, Yoshihiko; Kurokawa, Takefumi; Tamura, Ryuji; Okamoto, Takahiro; Ishido, Nobuhiro; Mori, Takashi

2010-01-01

Lap-Protector, which is an abdominal wall sealing device, is usually used for wound protection from implantation of malignant cells or pyogenic fluid. A circular stapler is a common easy-to-use device for anastomosis of the digestive tract. We report the case of an infected pancreatic pseudocyst which was treated by surgical procedure using these useful devices. A 69-year-old man was followed up in our hospital after severe acute pancreatitis. He had undergone drainage surgeries twice for intractable pancreatic abscess followed by severe acute pancreatitis. He was admitted to our hospital complaining of loss of appetite, hiccups, and high fever. Computed tomography of the abdomen revealed an infected pancreatic pseudocyst which compressed the gastric wall. Internal drainage into the stomach was performed using Lap-Protector and circular stapler. The patient recovered uneventfully. Recently many endoscopic or laparoscopic procedures in cystogastrostomy are reported; however, a conventional open surgical approach is also important. This easy method may be useful for operative cystogastrostomy. PMID:20805947

Graft reduction using a powered stapler in pediatric living donor liver transplantation.

PubMed

Yoshimaru, Koichiro; Matsuura, Toshiharu; Kinoshita, Yoshiaki; Hayashida, Makoto; Takahashi, Yoshiaki; Yanagi, Yusuke; Harimoto, Norifumi; Ikegami, Toru; Uchiyama, Hideaki; Yoshizumi, Tomoharu; Maehara, Yoshihiko; Taguchi, Tomoaki

2017-09-01

Large-for-size syndrome is defined by inadequate tissue oxygenation, which results in vascular complications and graft compression after abdominal closure in living donor liver transplantation recipients. An accurate graft reduction that matches the optimal liver volume for the recipient is essential. We herein initially present the feasibility and safety of graft reduction using a powered stapler to obtain an optimal graft size. From October 1996 to October 2015, a total of eight graft reductions were performed using a powered stapler (group A; n=4) or by the conventional method using a cavitron ultrasonic surgical aspirator and portal triad suturing (group B; n=4). The background, intraoperative findings and the post-operative outcomes of these eight patients were retrospectively investigated. There were no statistically significant differences in the background of the patients in the two groups. Graft reduction was successfully achieved without any intraoperative complications in group A, whereas intraoperative complications, such as bleeding and bile leakage, occurred in two patients of group B. No post-operative surgical complications were detected on computed tomography; moreover, the serum aspartate aminotransferase level normalized significantly earlier in group A (P<.05). In summary, graft reduction using a powered stapler was feasible and safe in comparison with the conventional method. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Transanal repair of rectocele and full rectal mucosectomy with one circular stapler: a novel surgical technique.

PubMed

Regadas, F S P; Regadas, S M M; Rodrigues, L V; Misici, R; Silva, F R; Regadas Filho, F S P

2005-04-01

We present a new surgical stapling technique for treatment of rectocele when associated with internal mucosal prolapse or haemorrhoids using only one circular mechanical stapler. Eight female patients, mean age 53 years (range, 42-70), complaining of obstructed defecation with vaginal digitation because of rectocele associated with internal mucosal prolapse underwent transanal repair of rectocele and rectal mucosectomy using one circular stapler between April and July 2004. A running horizontal mattress suture was placed through the base of the rectocele including mucosa, submucosa and the muscle layer of the whole anterior anorectal junction wall. The prolapsed mucosa and the muscular layer were then excised with an electrical scapel. A continuous pursestring rectal mucosa suture was placed 0.5 cm before the previous anterior mucosa and muscle layers resected wound, including the anorectal junction wall which was kept separate from the posterior vaginal wall by a Babcock forceps. Posteriorly, the pursestring suture included only mucosal and submucosal layers. The stapled suture was positioned between normal anterior rectal wall and the anal canal, 0.5 cm above the pectinate line. The stapler was then closed, fired and withdrawn. One patient complained of a perianal hematoma on the seventh postoperative day, requiring surgical excision. Postoperative defecography showed correction of the rectocele and outlet obstruction disappeared in all patients. This novel combined manual-stapled technique for rectocele and rectal internal mucosal prolapse seems to be a safe procedure and the preliminary results are encouraging. Further investigations have to be performed to assess long-term outcome in a larger number of patients.

Primary tracheoesophageal puncture and cricopharyngeal myotomy in stapler-assisted total laryngectomy.

PubMed

Beswick, D M; Damrose, E J

2016-07-01

To evaluate the utility of the hybrid tracheoesophageal puncture procedure in stapler-assisted laryngectomy. Patients who underwent total laryngectomy at a single institution from 2009 to 2015 were reviewed. The interventions assessed were surgical creation of a tracheoesophageal puncture and placement of a voice prosthesis. The outcomes measured included voicing ability and valve failure. Thirty-nine patients underwent total laryngectomy or pharyngolaryngectomy. Of these, nine underwent stapler-assisted laryngectomy; seven of the nine patients underwent concurrent stapler-assisted laryngectomy, cricopharyngeal myotomy and a hybrid tracheoesophageal puncture procedure. These seven patients were the focus of this review. Successful voicing and oral alimentation was achieved in all patients. Mean time to phonation was 30 days (range, 7-77 days) and mean time to first valve change was 90 days (range, 35-117 days). Primary tracheoesophageal puncture with concurrent voice prosthesis placement and cricopharyngeal myotomy is easily performed with stapler-assisted laryngectomy. The hybrid tracheoesophageal puncture procedure is a simple method that enables a single operator to achieve primary tracheoesophageal puncture and valve placement; in addition, it facilitates concurrent cricopharyngeal myotomy.

A novel one-shot circular stapler closure for atrial septal defect in a beating-heart porcine model.

PubMed

Tarui, Tatsuya; Tomita, Shigeyuki; Ishikawa, Norihiko; Ohtake, Hiroshi; Watanabe, Go

2015-02-01

In surgical atrial septal defect (ASD) closure, there are no techniques or devices that can close the ASD accurately in a short time under a beating heart. We have developed a simple and automatic ASD closure technique using a circular stapler. This study assessed the feasibility and efficacy of a new circular stapler closure for ASD. Under a continuous beating heart, hand-sewn patch plasty ASD closure was performed in 6 pigs (group A) and circular stapler ASD closure was performed in 6 pigs (group B). The time to close the ASD and the effectiveness of the closure were compared. Closure was significantly faster in group B (10.5 ± 1.0 seconds) than in group A (664 ± 10 seconds; p < 0.05). There was no leakage at the closure site, and sufficient tolerance was confirmed. A circular stapler can be used to treat ASD faster than hand-sewn patch plasty, with sufficient pressure tolerance in a beating heart porcine model. Copyright © 2015 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Changes in Small Intestine Tissue Compressed by a Linear Stapler Based on Cole Y Model.

PubMed

Zhou, Yu; Ren, Binbin; Li, Boting; Xu, Jingjing; Jin, Yiyun; Song, Chengli

2016-12-01

Clarifying changes in gastrointestinal tissue compressed by surgical stapler is a crucial prerequisite for stapler design optimization. For this study, a stapler was modified, and multifrequency bioimpedance of a porcine small intestine tissue compressed by the stapler was measured. The Cole Y model was fitted to the bioimpedance, and changes in tissue were analyzed using model parameters: G 0 , extracellular fluid conductance; ΔG, intracellular fluid conductance; C cpeF , equivalent capacitance of cell membrane. The changes could be divided into two stages: first, all parameters decreased sharply with slopes more than 15.70 ± 2.67, 4.25 ± 1.23 μS/s and 72.68 ± 6.99 pF/s respectively; and subsequently, with an increase in compression strength, G 0 decreased with slopes less than 2.54 ± 0.40 μS/s, ΔG decreased slightly with slope of 0.26 ± 0.04 μS/s after fluctuating mildly, and C cpeF remained nearly invariant after initially increasing with slope of -2.94 ± 0.64 pF/s. In conclusion, when the stapler is closed, a portion of tissue is squeezed out of the measurement space, causing all parameters' sharp decrease. Subsequently, the stapler continues compressing the tissue, leading to extracellular fluid expulsion. The changes in intracellular fluid are related to the compression strength and may be explained by cell restoration. This study could provide a basis for stapler design optimization.

Progression from laparoscopic-assisted to totally laparoscopic distal gastrectomy: comparison of circular stapler (i-DST) and linear stapler (BBT) for intracorporeal anastomosis.

PubMed

Ikeda, Tetsuo; Kawano, Hiroyuki; Hisamatsu, Yuichi; Ando, Koji; Saeki, Hiroshi; Oki, Eiji; Ohga, Takefumi; Kakeji, Yoshihiro; Tsujitani, Shunichi; Kohnoe, Shunji; Maehara, Yoshihiko

2013-01-01

Billroth I (B-I) gastroduodenostomy is an anastomotic procedure that is widely performed after gastric resection for distal gastric cancer. A circular stapler often is used for B-I gastroduodenostomy in open and laparoscopic-assisted distal gastrectomy. Recently, totally laparoscopic distal gastrectomy (TLDG) has been considered less invasive than laparoscopic-assisted gastrectomy, and many institutions performing laparoscopic-assisted distal gastrectomy are trying to progress to TLDG without markedly changing the anastomosis method. The purpose of this report is to introduce the technical details of new methods of intracorporeal gastroduodenostomy using either a circular or linear stapler and to evaluate their technical feasibility and safety. Seventeen patients who underwent TLDG with the intracorporeal double-stapling technique using a circular stapler (n = 7) or the book-binding technique (BBT) using a linear stapler (n = 10) between February 2010 and April 2011 were enrolled in the study. Clinicopathological data, surgical data, and postoperative outcomes were analyzed. There were no intraoperative complications or conversions to open surgery in any of the 17 patients. The usual postoperative complications following gastroduodenostomy, such as anastomotic leakage and stenosis, were not observed. Anastomosis took significantly longer to complete with DST (64 ± 24 min) than with BBT (34 ± 7 min), but more stapler cartridges were needed with BBT than with DST. TLDG using a circular or linear stapler is feasible and safe to perform. DST will enable institutions performing laparoscopic-assisted distal gastrectomy with circular staplers to progress to TLDG without problems, and this progression may be more economical because fewer stapler cartridges are used during surgery. However, if an institution has already been performing δ anastomosis in TLDG but has been experiencing certain issues with δ anastomosis, converting from δ anastomosis to BBT should be beneficial.

Surgical stapling device–tissue interactions: what surgeons need to know to improve patient outcomes

PubMed Central

Chekan, Edward; Whelan, Richard L

2014-01-01

The introduction of both new surgical devices and reengineered existing devices leads to modifications in the way traditional tasks are carried out and allows for the development of new surgical techniques. Each new device has benefits and limitations in regards to tissue interactions that, if known, allow for optimal use. However, most surgeons are unaware of these attributes and, therefore, new device introduction creates a “knowledge gap” that is potentially dangerous. The goal of this review is to present a framework for the study of device– tissue interactions and to initiate the process of “filling in” the knowledge gap via the available literature. Surgical staplers, which are continually being developed, are the focus of this piece. The integrity of the staple line, which depends on adequate tissue compression, is the primary factor in creating a stable anastomosis. This review focuses on published studies that evaluated the creation of stable anastomoses in bariatric, thoracic, and colorectal procedures. Understanding how staplers interact with target tissues is key to improving patient outcomes. It is clear from this review that each tissue type presents unique challenges. The thickness of each tissue varies as do the intrinsic biomechanical properties that determine the ideal compressive force and prefiring compression time for each tissue type. The correct staple height will vary depending on these tissue-specific properties and the tissue pathology. These studies reinforce the universal theme that compression, staple height, tissue thickness, tissue compressibility, and tissue type must all be considered by the surgeon prior to choosing a stapler and cartridge. The surgeon’s experience, therefore, is a critical factor. Educational programs need to be established to inform and update surgeons on the characteristics of each stapler. It is hoped that the framework presented in this review will facilitate this process. PMID:25246812

Randomized Controlled Trial of Pancreaticojejunostomy versus Stapler Closure of the Pancreatic Stump During Distal Pancreatectomy to Reduce Pancreatic Fistula.

PubMed

Kawai, Manabu; Hirono, Seiko; Okada, Ken-Ichi; Sho, Masayuki; Nakajima, Yoshiyuki; Eguchi, Hidetoshi; Nagano, Hiroaki; Ikoma, Hisashi; Morimura, Ryou; Takeda, Yutaka; Nakahira, Shin; Suzumura, Kazuhiro; Fujimoto, Jiro; Yamaue, Hiroki

2016-07-01

The aim of this study was to evaluate in a multicenter randomized controlled trial (RCT) whether pancreaticojejunostomy (PJ) of pancreatic stump decreases the incidence of pancreatic fistula after distal pancreatectomy (DP) compared with stapler closure. Several studies reported that PJ of pancreatic stump reduces the incidence of pancreatic fistula after DP. However, no RCT has confirmed the efficacy of PJ of pancreatic stump. One hundred thirty-six patients scheduled for DP were enrolled in this study between June 2011 and March 2014 at 6 high-volume surgical centers in Japan. Enrolled patients were randomized to either stapler closure or PJ. The primary endpoint was the incidence of pancreatic fistula based on the International Study Group on Pancreatic Fistula criteria. This RCT was registered with ClinicalTrials.gov (NCT01384617). Sixty-one patients randomized to stapler and 62 patients randomized to PJ were analyzed by intention-to-treat. Pancreatic fistula occurred in 23 patients (37.7%) in the stapler closure group and 24 (38.7%) in the PJ group (P = 0.332) in intention-to-treat analysis. The incidence of clinically relevant pancreatic fistula (grade B or C) was 16.4% for stapler closure and 9.7% for PJ (P = 0.201). Mortality was zero in both groups. In a subgroup analysis for thickness of pancreas greater than 12 mm, the incidence of clinically relevant pancreatic fistula occurred in 22.2% of the patients in the stapler closure group and in 6.2% of the PJ group (P = 0.080). PJ of the pancreatic stump during DP does not reduce pancreatic fistula compared with stapler closure.

Randomized Controlled Trial of Pancreaticojejunostomy versus Stapler Closure of the Pancreatic Stump During Distal Pancreatectomy to Reduce Pancreatic Fistula

PubMed Central

Kawai, Manabu; Hirono, Seiko; Okada, Ken-ichi; Sho, Masayuki; Nakajima, Yoshiyuki; Eguchi, Hidetoshi; Nagano, Hiroaki; Ikoma, Hisashi; Morimura, Ryou; Takeda, Yutaka; Nakahira, Shin; Suzumura, Kazuhiro; Fujimoto, Jiro; Yamaue, Hiroki

2016-01-01

Objectives: The aim of this study was to evaluate in a multicenter randomized controlled trial (RCT) whether pancreaticojejunostomy (PJ) of pancreatic stump decreases the incidence of pancreatic fistula after distal pancreatectomy (DP) compared with stapler closure. Background: Several studies reported that PJ of pancreatic stump reduces the incidence of pancreatic fistula after DP. However, no RCT has confirmed the efficacy of PJ of pancreatic stump. Methods: One hundred thirty-six patients scheduled for DP were enrolled in this study between June 2011 and March 2014 at 6 high-volume surgical centers in Japan. Enrolled patients were randomized to either stapler closure or PJ. The primary endpoint was the incidence of pancreatic fistula based on the International Study Group on Pancreatic Fistula criteria. This RCT was registered with ClinicalTrials.gov (NCT01384617). Results: Sixty-one patients randomized to stapler and 62 patients randomized to PJ were analyzed by intention-to-treat. Pancreatic fistula occurred in 23 patients (37.7%) in the stapler closure group and 24 (38.7%) in the PJ group (P = 0.332) in intention-to-treat analysis. The incidence of clinically relevant pancreatic fistula (grade B or C) was 16.4% for stapler closure and 9.7% for PJ (P = 0.201). Mortality was zero in both groups. In a subgroup analysis for thickness of pancreas greater than 12 mm, the incidence of clinically relevant pancreatic fistula occurred in 22.2% of the patients in the stapler closure group and in 6.2% of the PJ group (P = 0.080). Conclusions: PJ of the pancreatic stump during DP does not reduce pancreatic fistula compared with stapler closure. PMID:26473652

Use of the 5-mm Endoscopic Stapler for Ligation of Fistula in Laparoscopic-Assisted Repair of Anorectal Malformation.

PubMed

Slater, Bethany J; Kay, Saundra; Rothenberg, Steven S

2018-02-15

Laparoscopic anorectoplasty (LARRP) for the treatment of select anorectal malformations has gained popularity due to enhanced visualization of the fistula and the ability to place the rectum within the sphincter complex while minimizing division of muscles and the perineal incision. However, given the technical challenges and reported complications of ligation, a number of techniques have been described, including using clips, suture ligation, endoloops, or division without closure. We aimed to evaluate fistula closure and division for high imperforate anus using a 5-mm stapler (JustRight Surgical, Boulder, CO). A retrospective chart review was performed on patients who underwent LAARP for imperforate anus between March 2015 and December 2016. Four patients underwent LAARP with division of the fistula using the 5-mm stapler. The average age was 3.2 months and average weight was 4.5 kg. The location of the fistula was rectoprostatic in 3 cases and rectobladder neck in 1 case. There were no complications. Division of a fistula at or above the level of the prostate can safely and effectively be performed with the 5-mm stapler. The stapler allows for division flush with the urethra or bladder ergonomically and quickly.

Stapler suture of the pharynx after total laryngectomy.

PubMed

Dedivitis, R A; Aires, F T; Pfuetzenreiter, E G; Castro, M A F; Guimarães, A V

2014-04-01

The use of a stapler for pharyngeal closure during total laryngectomy was first described in 1971. It provides rapid watertight closure without surgical field contamination. The objective of our study was to compare the incidence of pharyngocutaneous fistula after total laryngectomy with manual and mechanical closures of the pharynx. This was a non-randomised, prospective clinical study conducted at two tertiary medical centres from 1996 to 2011 including consecutive patients with laryngeal tumours who underwent total laryngectomy. We compared the incidence of pharyngocutaneous fistula between two groups of patients: in 20 patients, 75 mm linear stapler closure was applied, whereas in 67 patients a manual suture was used. Clinical data were compared between groups. The groups were statistically similar in terms of gender, age, diabetes mellitus, smoking and alcohol consumption and tumour site. The group of patients who underwent stapler-assisted pharyngeal closure had a higher number of patients with previous tracheotomy (p < 0.001) and previous chemoradiation (p < 0.001). The incidence of pharyngocutaneous fistula was 30% in the mechanical closure group and 20.9% in the manual suture group (p = 0.42). In conclusion the use of the stapler does not increase the rate of fistulae.

Ergonomic evaluation of a mechanical anastomotic stapler used by Japanese surgeons.

PubMed

Kono, Emiko; Tada, Mitsunori; Kouchi, Makiko; Endo, Yui; Tomizawa, Yasuko; Matsuo, Tomoko; Nomura, Sachiyo

2014-06-01

The satisfaction rating of currently available mechanical staplers for Japanese surgeons with small hands is low. To identify the issue, we examined the relationship of hand dimensions and grip force with the operation force of a mechanical circular stapler. Hand dimensions and grip force were measured in 113 Japanese surgeons (52 men and 61 women). We then evaluated the relationship between grip width and the operation force required to push the lever of the stapler, at three points on the lever, using a digital force gauge. The optimal grip width of the dominant hand was 62.5 ± 8.5 mm for men and 55.5 ± 5.9 mm for women (p < 0.001). The maximum grip force of the dominant hand was 44.2 ± 6.1 kg for men and 29.7 ± 4.5 kg for women (p < 0.001) and the maximum operation force required to push the lever 7.0, 45.0, and 73.0 mm from the end of the lever was 21.8, 28.6, and 42.4 kg, respectively. To our knowledge, this is the first ergonomic study of a surgical stapler to be conducted in Asia. Firing the stapler by gripping the proximal side of the lever is physically impossible for most Japanese women surgeons since the required operation force exceeds the maximum grip force, which probably accounts for the stress perceived by these women.

What is the benefit of a new stapler device in the surgical treatment of obstructed defecation? Three-year outcomes from a randomized controlled trial.

PubMed

Boccasanta, Paolo; Venturi, Marco; Roviaro, Giancarlo

2011-01-01

A randomized study was conducted to compare the clinical and functional outcomes of the stapled transanal rectal resection, using the traditional 2 circular staplers and a new, curved stapler device in patients with obstructed defecation caused by rectal intussusception and rectocele. Stapled transanal rectal resection gives good midterm results in patients with obstructed defecation syndrome, but the limited capacity of the casing of the circular stapler and the impossibility to control the positioning of the rectal wall and the firing of staples may result in incomplete removal of the prolapsed tissues, or serious complications. The new curved multifire stapler could avoid these drawbacks. From January to December 2006, 100 women were selected, with clinical examination, constipation score, colonoscopy, anorectal manometry, and perineography, and randomly assigned to 2 groups: 50 patients underwent stapled transanal rectal resection with 2 traditional circular staplers (STARR group) and 50 had the same operation with a new, curved multifire stapler (TRANSTAR group). Patients were followed up with clinical examination, constipation score, and colpocystodefecography, with the recurrence rate as the primary outcome measure. Recurrence rates at 3 years were 12.0% in STARR group and 0 in the TRANSTAR group (P = .035). Operating time was significantly shorter in the STARR group (P = .008). Complications were 2 bleeds (4%) in the STARR group and 1 tear of the vagina in the TRANSTAR group. The incidence of fecal urgency was 34.0% in the STARR group and 14.0% in the TRANSTAR group (P = .035). All symptoms and defecographic parameters significantly improved after the operation (P < .001) without differences between groups. The curved Contour Transtar stapler device did not appear to offer significant advantages over the traditional PPH-01 device during the operation or in the clinical and functional outcomes. However, the lower incidence of fecal urgency and recurrences might justify the higher cost of the new stapler.

Rectal transection using a curved cutter stapler with an endo-Satinsky clamp during a laparoscopic low anterior resection.

PubMed

Hotta, Tsukasa; Takifuji, Katsunari; Yokoyama, Shozo; Matsuda, Kenji; Yamaue, Hiroki

2012-10-01

A new rectal transaction method was developed using a combination of the curved cutter stapler and endo-Satinsky clamp because of the difficulty in performing rectal transection in the narrow pelvic cavity. The endo-Satinsky clamp is inserted without a flexible trocar cannula by connecting the handle extra-abdominally with a shaft of the endo-Satinsky clamp through the left higher quadrant port via a retrograde course from a midline incision above the pubis symphysis. The endo-Satinsky clamp is used to clamp the rectal wall horizontally at the distal end of the tumor. The wrist of an elastic surgical glove fixed with the shaft of the curved cutter stapler is covered with a midline incision, and consequently, the stapler is inserted into the pelvic cavity. The curved head of the stapler is rotated to the left at the anal side of the endo-Satinsky clamp to insert the rectum between the jaws of the stapler. The stapler is closed and fired, and a rectal transection is thus performed with one firing using a single cartridge. This method was performed in 12 patients with rectal cancer. The median value and range of the tumor distance from the anal verge were 7.0 and 4.5-11.0 cm, respectively. The median duration of the operation was 252 min, and the median blood loss was 15 mL. Only one stapling cartridge was used for rectal transection in all cases, and no major complications were observed. We herein demonstrated a new transection method for rectal cancer.

Evaluation of the Surgery Wound Healing Process Using Self-Adaptive Skin Suture or Mechanical Stapler.

PubMed

Sztuczka, Ewa; Jackowski, Marek; Żukowska, Wioletta

2016-09-01

Wound healing is a complex and time-phased process. The occurrence of numerous negative conditions as well as external factors have a significant influence on the risk of potential complications. Preparing the patient for surgery, attention should be paid to a number of factors determining the proper healing process. The aim of the study was to compare the results of the early period of surgical wound healing process with access via laparotomy using techniques, which are self-adaptive sutures and mechanical staplers used for skin closure. The study included 120 patients divided into three groups, according to the degree of wound continence, in accordance with the CDC (Center for Disease Control and Prevention). Exclusion criteria based on objective analysis were applied for patients with a higher risk of complications. In all cases the skin layer was closed with monofilament suture or single-patient use stapler. A ten-day observation of the wound healing process was implemented. The study was randomized. In the case of patients groups identified as a "Clean Wound" and " Clean / Infected Wound" no significant differences were discovered. In the group "Contaminated/Infected Wound" significantly higher percentage of wound-healing complications were reported (p < 0.05) for which monofilament sutures was used. The study showed, that mechanical stapler is recommended for contaminated/infected surgical wounds due to significantly lower risk of complications. In the case of wounds divided as a "Clean" and "Clean/Infected" type of suturing material has no significant effect on wound healing.

Side-to-side cavocavostomy with an endovascular stapler: Rescue technique for severe hepatic vein and/or inferior vena cava outflow obstruction after liver transplantation using the piggyback technique.

PubMed

Quintini, Cristiano; Miller, Charles M; Hashimoto, Koji; Philip, Ding; Uso, Teresa Diago; Aucejo, Federico; Kelly, Dympna; Winans, Charles; Eghtesad, Bijan; Vogt, David; Fung, John

2009-01-01

Venous outflow obstruction is a rare but potentially lethal complication after orthotopic liver transplantation (OLT) with the "piggyback" technique. Therapeutic options include angioplasty with or without stent placement, surgical reconstruction of the venous anastomosis, and retransplantation. Surgical options are technically very challenging and the outcomes discouraging. We describe here two cases of venous outflow obstruction in recipients of piggyback liver grafts, one involving both the vena cava and hepatic veins and the other affecting only hepatic vein outflow. Both patients were treated successfully with side-to-side cavo-cavostomy using an endovascular (endo-GIA) stapler. This novel technique is fast and effective in resolving the outflow obstruction. Copyright 2008 AASLD.

Evaluation of a Powered Stapler System with Gripping Surface Technology on Surgical Interventions Required During Laparoscopic Sleeve Gastrectomy.

PubMed

Fegelman, Elliott; Knippenberg, Susan; Schwiers, Michael; Stefanidis, Dimitrios; Gersin, Keith S; Scott, John D; Fernandez, Adolfo Z

2017-05-01

Transection of gastric tissue during laparoscopic sleeve gastrectomy (LSG) can be challenging. Reinforcing the staple line may decrease the incidence of issues requiring intervention. The objective of this study was to compare the number of intraoperative surgical interventions for a surgical stapler and reload system with Gripping Surface Technology (GST) to standard reloads in patients who underwent LSG. Patients who underwent elective LSG were enrolled. The study was conducted in two stages. For Stage 1, procedures were performed using a powered stapler and standard reloads. For Stage 2, a reload system with GST was used. The primary endpoint was surgical interventions for bleeding and/or staple line issues during transection of the greater curvature of the stomach. Propensity score matching was applied to create two groups similar in baseline characteristics and risk factors. A total of 111 subjects were enrolled across four centers. Propensity-matched procedures were completed with the standard (n = 38) or GST reloads (n = 38). The mean number of interventions in the standard group was 1.9 (1.29) versus 1.1 (1.45) in the GST group. Nonparametric comparisons were statistically significant, indicating a reduction in the distribution of interventions for GST subjects (P = .0036 for matched pair data). Tissue slippage during transection was low for both groups. Intraoperative leak testing was negative in all procedures, and no procedures were converted to open. Use of the GST stapling system reduces the need for staple line interventions in LSG. Both stapling systems had an acceptable safety profile.

Comparison of totally laparoscopic total gastrectomy using an endoscopic linear stapler with laparoscopic-assisted total gastrectomy using a circular stapler in patients with gastric cancer: A single-center experience.

PubMed

Gong, Chung Sik; Kim, Byung Sik; Kim, Hee Sung

2017-12-28

To evaluate the safety and efficacy of totally laparoscopic total gastrectomy (TLTG) with esophagojejunostomy using a linear stapler compared with laparoscopic-assisted total gastrectomy (LATG) using a circular stapler in gastric cancer patients. We retrospectively reviewed 687 patients who underwent laparoscopic total gastrectomy for gastric cancer at a single institution from August 2008 to August 2014. The patients were divided into two groups according to the type of operation: 421 patients underwent TLTG and 266 underwent LATG. Clinicopathologic characteristics and surgical outcomes in the two groups were compared and analyzed. The TLTG group had higher mean ages at the time of operation (57.78 ± 11.20 years and 55.69 ± 11.96 years, P = 0.020) and more histories of abdominal surgery (20.2% and 12.4%, P = 0.008) compared with the LATG group. Surgical outcomes such as intraoperative and postoperative transfusions, combined operations, pain scores and administration of analgesics, and complications were similar between the two groups. However, compared with the LATG group, the TLTG group required a shorter operation time (149 min vs 170 min, P < 0.001), had lower postoperative hematocrit change (3.49% vs 4.04%, P = 0.002), less intraoperative events (3.1% vs 10.2%, P < 0.001), less intraoperative anastomosis events (2.4% vs 7.1%, P = 0.003), faster postoperative recovery such as median time to first flatus (3.30 d vs 3.60 d, P < 0.001), faster median commencement of soft diet (4.30 d vs 4.60 d, P < 0.001) and shorter length of postoperative hospital stay (6.75 d vs 7.02 d, P = 0.005). The intracorporeal method for reconstruction of esophagojejunostomy using a linear stapler may be considered a feasible procedure comparing with extracorporeal anastomosis using circular stapler because TLTG is simpler and more straightforward than LATG. Therefore, TLTG can be recommended as an appropriate procedure for gastric cancer.

Comparison of totally laparoscopic total gastrectomy using an endoscopic linear stapler with laparoscopic-assisted total gastrectomy using a circular stapler in patients with gastric cancer: A single-center experience

PubMed Central

Gong, Chung Sik; Kim, Byung Sik; Kim, Hee Sung

2017-01-01

AIM To evaluate the safety and efficacy of totally laparoscopic total gastrectomy (TLTG) with esophagojejunostomy using a linear stapler compared with laparoscopic-assisted total gastrectomy (LATG) using a circular stapler in gastric cancer patients. METHODS We retrospectively reviewed 687 patients who underwent laparoscopic total gastrectomy for gastric cancer at a single institution from August 2008 to August 2014. The patients were divided into two groups according to the type of operation: 421 patients underwent TLTG and 266 underwent LATG. Clinicopathologic characteristics and surgical outcomes in the two groups were compared and analyzed. RESULTS The TLTG group had higher mean ages at the time of operation (57.78 ± 11.20 years and 55.69 ± 11.96 years, P = 0.020) and more histories of abdominal surgery (20.2% and 12.4%, P = 0.008) compared with the LATG group. Surgical outcomes such as intraoperative and postoperative transfusions, combined operations, pain scores and administration of analgesics, and complications were similar between the two groups. However, compared with the LATG group, the TLTG group required a shorter operation time (149 min vs 170 min, P < 0.001), had lower postoperative hematocrit change (3.49% vs 4.04%, P = 0.002), less intraoperative events (3.1% vs 10.2%, P < 0.001), less intraoperative anastomosis events (2.4% vs 7.1%, P = 0.003), faster postoperative recovery such as median time to first flatus (3.30 d vs 3.60 d, P < 0.001), faster median commencement of soft diet (4.30 d vs 4.60 d, P < 0.001) and shorter length of postoperative hospital stay (6.75 d vs 7.02 d, P = 0.005). CONCLUSION The intracorporeal method for reconstruction of esophagojejunostomy using a linear stapler may be considered a feasible procedure comparing with extracorporeal anastomosis using circular stapler because TLTG is simpler and more straightforward than LATG. Therefore, TLTG can be recommended as an appropriate procedure for gastric cancer. PMID:29358863

A comparison of the flow of iodine 125 through three different intestinal anastomoses: standard, Gambee, and stapler

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wheeless, C.R. Jr.; Smith, J.J.

1983-10-01

Angiogenesis determines blood supply, and it is postulated that after surgery, the healing of a wound is directly related to the blood supplied to the surrounding tissues. As a first step in evaluating the process of flow through different surgical anastomoses, the flow rate of /sup 125/I through three different types of anastomoses in the intestines of dogs was determined. When the results were compared, the flow rate through the stapler anastomosis was significantly higher than the flow rate through the standard and Gambee anastomoses.

A comparison of septal stapler to suture closure in septoplasty: a prospective, randomized trial evaluating the effect on operative time.

PubMed

Sowerby, Leigh J; Wright, Erin D

2013-11-01

Septoplasty requires coaptation of the mucosal flaps at the conclusion of the procedure; classically this is done with nasal packing. Quilting sutures provide a welcome alternative to packing, but can be time-consuming to place. A septal stapler has recently been developed that provides a rapid alternative to quilting sutures but the timesaving has not been quantified. This study was a prospective, randomized trial comparing a septal stapler to quilting suture for coaptation of mucosal flaps in septoplasty. After meeting inclusion criteria, patients underwent septoplasty and inferior turbinoplasty. The total operative time, surgical segment times, including time for closure was recorded. Preoperative and postoperative Nasal Obstruction Symptom Evaluation (NOSE) scores were recorded. A sample size of 16 was determined to detect a difference of 5 minutes in closure time. A total of 16 patients were enrolled in the study. The mean time for closure with septal stapler was 35 ± 22 seconds vs 7 minutes ± 1 minute 10 seconds for suture closure (p < 0.0001). The mean total operative time using the septal stapler was 28 minutes ± 6 minutes whereas 43 minutes ± 13 minutes was required for suture (p = 0.014). No difference in postoperative complications or mucosal healing was seen; preoperative and postoperative improvement in NOSE scores was comparable. Coaptation of the mucosal flaps in septoplasty with a septal stapler affords a timesaving in the operating room with no difference in operative outcome. © 2013 ARS-AAOA, LLC.

Efficacy of stapler pharyngeal closure after total laryngectomy: A systematic review.

PubMed

Aires, Felipe T; Dedivitis, Rogério A; Castro, Mario Augusto F; Bernardo, Wanderley Marques; Cernea, Claudio Roberto; Brandão, Lenine Garcia

2014-05-01

Some primary studies compare manual and mechanical pharyngeal closures after total laryngectomy. The purpose of this study was to evaluate the advantages of the mechanical suture in pharyngeal closure. The literature survey included research in MEDLINE, EMBASE, and LILACS. The intervention analyzed was stapler-assisted pharyngeal closure, whereas the control group was manual suture pharyngeal closure. The survey resulted in 319 studies. However, 4 studies were selected (417 patients). In the group of patients in whom the stapler was used, the incidence of pharyngocutaneous fistula was 8.7%, whereas in the other, it was 22.9%, with an absolute risk reduction of 15% (95% confidence interval [CI], 0.02-0.28; p = .02; I(2) = 66%). Regarding the surgical time, the average difference was 80 minutes in favor of the stapler group (95% CI, 23.16-136.58 minutes; p < .006). The difference for starting oral feeding was 8 days in favor of the mechanical suture (95% CI, 4.01-11.73 days; p < .001). Patients who underwent mechanical suture had a shorter hospitalization period. Copyright © 2013 Wiley Periodicals, Inc.

The endoscopic stapler diverticulotomy for Zenker's diverticulum.

PubMed

Manni, Johannes J; Kremer, Bernd; Rinkel, Rico N P M

2004-02-01

This paper describes the surgical procedure of the endoscopic stapler treatment of Zenker's diverticulum and analyzes the results of 24 consecutive operated patients. In three patients the endoscopic exposure of the diverticulum was not possible. Twenty-one patients underwent endoscopic stapler treatment without any peri- or postoperative complications. The follow-up period was 4 to 29 months (average 18 months). The average total time for surgery was 25 min. Postoperatively, a nasogastric feeding tube was not necessary: all patients resumed oral intake 12 h after surgery. Discharge from the hospital followed the 2nd postoperative day. All patients had complete or nearly complete resolution of symptoms at the 4-month follow-up. Recurrent complaints were an indication for repeat of the contrast barium esophagram. Two patients revealed a residual diverticulum 7 and 11 months after treatment. In comparison with results and complication rates in the literature of the external, transcutaneous techniques and endoscopic diverticulotomy procedures, the endoscopic stapler treatment of Zenker's diverticulum is a safe, (cost-)effective and minimally invasive method and to be considered as the initial treatment of choice.

The role of pancreatic leakage on rising of postoperative complications following pancreatic surgery.

PubMed

Benzoni, Enrico; Saccomano, Enrico; Zompicchiatti, Aron; Lorenzin, Dario; Baccarani, Umberto; Adani, Gian Luigi; Uzzau, Alessandro; Noce, Luigi; Cedolini, Carla; Bresadola, Fabrizio; De Anna, Dino; Intini, Sergio

2008-10-01

The variations in methods of pancreatic stump management and the volume of literature available on both main pancreatic duct and pancreaticoenetric anastomosis leak indicates the concern associated with the leak and the continuing efforts to prevent it. Herein we analyzed the role of pancreatic leakage followed by pancreatic surgery on the incidence of postoperative morbidity. From 1989 to 2005, we performed 76 pancreaticoduodenectomy (PD) and 26 distal pancreatectomy (DP), assumed as control case). During DP the parenchymal transection was performed with a linear stapler. The surgical reconstruction after PD was as follows: 11 manual nonabsorbable stitch closure of the main duct, 24 closure of the main duct with linear stapler, 17 temporary occlusion of the main duct with neoprene glue, and 24 duct-to-mucosa anastomosis. In the PD group, morbidity rate was 60%, caused by pancreatic leakage, with an incidence of 48%, hemorrhagic complication, occurred in 10% of patients following surgical procedure and infectious complication, with an incidence of 15%. After distal pancreatectomy we recorded 80, 7% no complications, 3, 9% leakage, 15, 4% hemoperitoneum. By multivariate analysis bleeding complications, biliary anastomosis leakage, and infectious complications were consequences of pancreatic leakage (P = 0.025, P = 0.025, and P = 0.025, respectively). A significant statistical difference was recorded analyzing re-operation rates between closure of the main duct with linear stapler versus temporary occlusion of the main duct with neoprene glue (t = 0.049) and closure of the main duct with linear stapler versus duct-to-mucosa anastomosis (t = 0.003). On the ground of our results of bleeding complication, biliary anastomosis leakage and infectious complication were consequences of pancreatic leakage: failure of a surgical anastomosis has serious consequences, particularly in case of anastomosis of the pancreas to the small bowel, because of the digestive capacities of activated pancreatic secretions.

A Comparative Study of Outcomes for Endoscopic Diverticulotomy versus External Diverticulectomy

PubMed Central

Shahawy, Sarrah; Janisiewicz, Agnieszka M.; Annino, Don; Shapiro, Jo

2014-01-01

Objectives Current literature on the treatment of Zenker's Diverticulum (ZD) favors the use of various endoscopic procedures over external surgical techniques for patients, arguing that endoscopic approaches reduce intraoperative time and anesthesia, length of hospital stay, and days until oral diet is restarted. However, such techniques often have higher symptomatic recurrence rates and require further interventions. Because of our experience with both endoscopic diverticulotomy (ENDO) and external diverticulectomy (EXT) using the GIA-stapler, we sought to compare these two procedures in terms of in-hospital parameters, complications, return to normal diet, and rates of symptom recurrence. Study Design Case series with chart review. Setting Academic tertiary care hospital. Subjects Patients with Zenker's diverticulum who underwent surgical repair. Methods Retrospective analysis of 67 patients seen at Brigham and Women's Hospital between 1990 and 2012 with Zenker's diverticulum who underwent either an endoscopic Zenker's procedure (36) or an external stapler-assisted diverticulectomy with cricopharyngeal myotomy (31). Results Although the external stapler-assisted procedure for ZD does carry a longer intra-operative time and a slightly longer hospital stay than the endoscopic approach, it provides similar days until initiation of an oral diet and a similar incidence of post-operative complications. Further, it is superior to the endoscopic approach when one considers its much lower rate of symptomatic recurrence and need for revision procedures. Conclusion We argue that the external stapler-assisted diverticulectomy with cricopharyngeal myotomy should be considered as a viable treatment in patients who need definitive, single-session treatment for ZD, especially to prevent life-threatening aspiration pneumonia. PMID:24990870

Impact of Powered and Tissue-Specific Endoscopic Stapling Technology on Clinical and Economic Outcomes of Video-Assisted Thoracic Surgery Lobectomy Procedures: A Retrospective, Observational Study.

PubMed

Miller, Daniel L; Roy, Sanjoy; Kassis, Edmund S; Yadalam, Sashi; Ramisetti, Sushama; Johnston, Stephen S

2018-05-01

Video-assisted thoracic surgery (VATS) lung resections are complex procedures with a critical role played by endoscopic staplers in the transection of vessels, bronchi, and lung tissue. This retrospective, observational study compared hospital resource use, costs, and complications of VATS lobectomy procedures for whom powered versus manual endoscopic surgical staplers were used. Patients ≥ 18 years of age undergoing elective VATS lobectomy during an inpatient admission from January 1, 2012 to September 30, 2016 were identified from the Premier Healthcare Database (first admission = index admission). Use of either powered or manual endoscopic staplers during the index admission was identified from hospital administrative records. Multivariable regression analyses adjusting for patient, hospital, and provider characteristics and hospital-level clustering were carried out to compare the following outcomes between the powered and manual stapler groups: hospital length of stay (LOS), operating room time (ORT), hospital costs, complications (bleeding and/or transfusions, air leak complications, pneumonia, and infection), discharge status, and 30-, 60-, and 90-day all-cause readmissions. The powered and manual stapler groups comprised 659 patients (mean age 66.1 years; 53.6% female) and 3100 patients (mean age 66.7 years; 54.8% female), respectively. In the multivariable analyses, the powered stapler group had shorter LOS (4.9 vs. 5.9 days, P < 0.001), lower total hospital costs ($23,841 vs. $26,052, P = 0.009), and lower rates of combined hemostasis complications (bleeding and/or transfusions; 8.5% vs. 16.0%, P < 0.001) and transfusions (5.4% vs. 10.9%, P = 0.002), compared with the manual stapler group. Other outcomes did not differ significantly between the study groups. Similar trends were observed in subanalyses comparing devices across predominant manufacturers in each group, and in subanalyses of patients with comorbid chronic obstructive pulmonary disease. In this analysis of VATS lobectomy procedures, powered staplers were associated with significant benefits with respect to selected types of hospital resource use, costs, and clinical outcomes when compared with manual staplers. Johnson & Johnson.

Experimental results of mesh fixation by a manual manipulator in a laparoscopic inguinal hernia repair model.

PubMed

Inaki, N; Waseda, M; Schurr, M O; Braun, M; Buess, G F

2007-02-01

Laparoscopic mesh fixation using a stapler can lead to complications such as nerve injury and bowel injury. However, mesh fixation by suturing with conventional laparoscopic instruments (CLI) is difficult because of limited degrees of freedom. A manual manipulator--Radius Surgical System (Radius)--whose tip can deflect and rotate, gives the surgeon two additional degrees of freedom. The aim of this study is to evaluate the introduction of Radius to mesh fixation in laparoscopic inguinal hernia repair. A model for inguinal hernia repair was prepared using animal organs in a trainer. Mesh fixation was performed using Radius, stapler, and CLI. Tensile strength during extraction of mesh toward the vertical direction, and execution time, were measured. The mean number of fixation points of Radius, stapler, and CLI was 9.3 +/- 1.5, 8.5 +/- 1.4, and 9.0 +/- 1.0, respectively. The mean tensile strength of fixation of mesh of Radius, stapler, and CLI was 140.7 +/- 48.9, 73.1 +/- 23.4, and 53.6 +/- 31.5 (N), respectively. The mean tensile strength per one fixation point by Radius, stapler, and CLI was 16.5 +/- 5.3, 8.7 +/- 2.8, and 6.3 +/- 3.6 (N), respectively. The mean execution time of Radius, stapler, and CLI was 479 +/- 108, 54 +/- 31, and 431 +/- 77 (sec), respectively. The mesh fixation by Radius was stronger than that by staples and CLI. Two additional degrees of freedom were useful in difficult angles. The introduction of Radius is feasible and facilitates the fixation of mesh with sutures in laparoscopic inguinal hernia repair.

Rectovaginal fistula following colectomy with an end-to-end anastomosis stapler for a colorectal adenocarcinoma.

PubMed

Klein, A; Scotti, S; Hidalgo, A; Viateau, V; Fayolle, P; Moissonnier, P

2006-12-01

An 11-year-old, female neutered Labrador retriever was presented with a micro-invasive differentiated papillar adenocarcinoma at the colorectal junction. A colorectal end-to-end anastomosis stapler device was used to perform resection and anastomosis using a transanal technique. A rectovaginal fistula was diagnosed two days later. An exploratory laparotomy was conducted and the fistula was identified and closed. Early dehiscence of the colon was also suspected and another colorectal anastomosis was performed using a manual technique. Comparison to a conventional manual technique of intestinal surgery showed that the use of an automatic staple device was quicker and easier. To the authors' knowledge, this is the first report of a rectovaginal fistula occurring after end-to-end anastomosis stapler colorectal resection-anastomosis in the dog. To minimise the risk of this potential complication associated with the limited surgical visibility, adequate tissue retraction and inspection of the anastomosis site are essential.

[Possibilities of laparoscopic gastric resection for gastrointestinal stromal tumors].

PubMed

Grubnik, V V; Kovahichuk, A L; Malinovskiy, A V; Barannikov, K V

2016-08-01

Possibilities of laparoscopic technologies application while surgical excision of gas- trointestinal stromal tumors (GIST) were analyzed. In 2000 - 2015 yrs in the clinic 28 patients were operated on for gastric GIST. In 10 of them laparoscopic gastric resec- tion with tumor (in 3 - the tumor excision in borders of nonaffected tissues, in 4 - gas- tric fundus resection or stapler resection of a great curvature together with tumor, in 3 - transgastric excision of the tumor, using staplers) surgery was done. The disease recurrence in 2-5 yrs follow-up was absent. Laparoscopic operations has advantage over open interventions while preserving oncological radicalism.

[Use of a linear stapler device in total laryngectomy].

PubMed

Liu, Xue-kui; Li, Hao; Liu, Wei-wei; Li, Qiu-li; Li, Quan; Zhang, Xin-rui; Zhang, Xing; Guo, Zhu-ming; Zeng, Zong-yuan

2012-07-01

To evaluate the value of using a linear stapler device for the closure of the pharynx during total laryngectomy. Sixteen total laryngectomies were performed between August 2010 and December 2011, during the operation, the TA 60 linear stapler was used for pharyngeal closure. Among these patients, two patients had the history of pre-operative radiotherapy, four patients recurred after radiotherapy, ten patients were treated for the first time. 100 ml methylene blue was injected into the newly closed laryngopharyngeal cavity through the nasopharyngeal breather pipe for checking up whether it was watertight or not. Among the sixteen patients, methylene blue leakage from the mucosal joint of the gular cavity closed by the stapler were not found in fifteen patients, it was only found in one patient. The transudatory places were sutured with absorbable Vicryl sutures. This patient healed well without pharyngocutaneous fistula. Negative surgical margins were achieved in all patients. No patient needed to be transferred to open surgery. Using a linear stapler device in total laryngectomy, 45 minutes could be saved as compaired to manual suture. One patient developed a light pharyngocutaneous fistula. The incidence of pharyngocutaneous fistula was 6.25% (1/16). This stapled closed technique for pharyngoplasty is efficient, eliminates the risk of wound contamination, saves operation time and decreases the incidence of pharyngocutaneous fistula. This technique can be recommended as alternative for repairing the pharynx in patients undergoing total laryngectomy.

[Closing the resection surface in left pancreatic resection with the surgical stapler].

PubMed

Fuchs, M; Köhler, H; Schafmayer, A; Peiper, H J

1992-01-01

In the present paper a technique is demonstrated wherein the closure of the pancreatic remnant following left pancreatectomy with absorbable staples was performed. The good results with minimal complications recommend this method.

Radiofrequency-induced heating versus mechanical stapler for pancreatic stump closure: in vivo comparative study.

PubMed

Burdío, Fernando; Dorcaratto, Dimitri; Hernandez, Lourdes; Andaluz, Anna; Moll, Xavier; Quesada, Rita; Poves, Ignasi; Grande, Luis; Cáceres, Marta; Berjano, Enrique

2016-05-01

The aim of this study was to assess the capacity of two methods of surgical pancreatic stump closure in terms of reducing the risk of pancreatic fistula formation (POPF): radiofrequency-induced heating versus mechanical stapler. Sixteen pigs underwent a laparoscopic transection of the neck of the pancreas. Pancreatic anastomosis was always avoided in order to work with an experimental model prone to POPF. Pancreatic stump closure was conducted either by stapler (ST group, n = 8) or radiofrequency energy (RF group, n = 8). Both groups were compared for incidence of POPF and histopathological alterations of the pancreatic remnant. Six animals (75%) in the ST group and one (14%) in the RF group were diagnosed with POPF (p = 0.019). One animal in the RF group and three animals in the ST group had a pseudocyst in close contact with both pancreas stumps. On day 30 post-operation (PO), almost complete atrophy of the exocrine distal pancreas was observed when the main pancreatic duct was efficiently sealed. Our findings suggest that RF-induced heating is more effective at closing the pancreatic stump than mechanical stapler and leads to the complete atrophy of the distal remnant pancreas.

Clamp-Crushing versus stapler hepatectomy for transection of the parenchyma in elective hepatic resection (CRUNSH) - A randomized controlled trial (NCT01049607)

PubMed Central

2011-01-01

Background Hepatic resection is still associated with significant morbidity. Although the period of parenchymal transection presents a crucial step during the operation, uncertainty persists regarding the optimal technique of transection. It was the aim of the present randomized controlled trial to evaluate the efficacy and safety of hepatic resection using the technique of stapler hepatectomy compared to the simple clamp-crushing technique. Methods/Design The CRUNSH Trial is a prospective randomized controlled single-center trial with a two-group parallel design. Patients scheduled for elective hepatic resection without extrahepatic resection at the Department of General-, Visceral- and Transplantation Surgery, University of Heidelberg are enrolled into the trial and randomized intraoperatively to hepatic resection by the clamp-crushing technique and stapler hepatectomy, respectively. The primary endpoint is total intraoperative blood loss. A set of general and surgical variables are documented as secondary endpoints. Patients and outcome-assessors are blinded for the treatment intervention. Discussion The CRUNSH Trial is the first randomized controlled trial to evaluate efficacy and safety of stapler hepatectomy compared to the clamp-crushing technique for parenchymal transection during elective hepatic resection. Trial Registration ClinicalTrials.gov: NCT01049607 PMID:21888669

PubMed Central

DEDIVITIS, R.A.; AIRES, F.T.; PFUETZENREITER, E.G.; CASTRO, M.A.F.; GUIMARÃES, A.V.

2014-01-01

SUMMARY The use of a stapler for pharyngeal closure during total laryngectomy was first described in 1971. It provides rapid watertight closure without surgical field contamination. The objective of our study was to compare the incidence of pharyngocutaneous fistula after total laryngectomy with manual and mechanical closures of the pharynx. This was a non-randomised, prospective clinical study conducted at two tertiary medical centres from 1996 to 2011 including consecutive patients with laryngeal tumours who underwent total laryngectomy. We compared the incidence of pharyngocutaneous fistula between two groups of patients: in 20 patients, 75 mm linear stapler closure was applied, whereas in 67 patients a manual suture was used. Clinical data were compared between groups. The groups were statistically similar in terms of gender, age, diabetes mellitus, smoking and alcohol consumption and tumour site. The group of patients who underwent stapler-assisted pharyngeal closure had a higher number of patients with previous tracheotomy (p < 0.001) and previous chemoradiation (p < 0.001). The incidence of pharyngocutaneous fistula was 30% in the mechanical closure group and 20.9% in the manual suture group (p = 0.42). In conclusion the use of the stapler does not increase the rate of fistulae. PMID:24843218

[First experience in surgical treatment of hemorrhoidal disease using the PPH stapler].

PubMed

Morales-Olivera, José Martín; Velasco, Liliana; Bada-Yllán, Orlando; Vergara-Fernández, Omar; Takahashi-Monroy, Takeshi

2007-01-01

Haemorrhoidal disease is a frequent entity worldwide. The surgical management is indicated in third or fourth degree internal hemorrhoidal disease. The conventional hemorrhoidectomy has showed good results but the severe postoperative pain is an important complain. Currently diverse surgical alternatives have been described, mainly to avoid the postoperative pain that follows surgical hemorrhoidectomy. One of these new options is the stapled hemorrhoidectomy using the PPH stapler. This procedure may produce less postoperative pain, with a shorter inpatient stay and faster return to work. The aim of this paper is to analyze the results of using the Procedure for Prolapsed Hemorrhoids (PPH) as treatment in Hemorrhoidal Disease. This is an observational and descriptive study, where 17 patients underwent stapled hemorrhoidectomy with PPH procedure, between March 2000 and August 2003. 52.8% of this patients presented grade three internal hemorrhoids and 47.2% grade four; 52.9% presented mild postoperative pain; 41.2% moderate and 5.9% severe pain. In a short and median follow up, due to the persistence of hemorrhoidal disease symptoms two patients required surgical re-intervention. Two more patients presented incontinency. One patient presented stenosis in the line of staples treated satisfactory with an anal dilatation session. The use of PPH is a feasible and safe procedure and it could be a surgical alternative in the treatment of hemorrhoidal disease, even before than conventional hemorrhoidectomy.

Laparoscopic discoid anterior rectal excision with the circular stapler for rectosigmoid endometriosis, performed by the gynecologic surgeon.

PubMed

Zanatta, Alysson; Sousa, Jânio S; Machado, Ricardo L; Polcheira, Paulo A

2015-01-01

To demonstrate the technique of laparoscopic discoid anterior rectal wall resection using a circular stapler, feasible in the case of rectosigmoid endometriosis lesions measuring ≤ 3 cm. Case report (Canadian Task Force classification III). Private practice hospital in São Paulo, Brazil. Thirty-four-year-old woman with pelvic deep endometriosis including a 2-cm lesion in the rectosigmoid situated 11 cm proximally to the anal border. She had chronic pelvic pain, dysmenorrhea, dyspareunia, and constipation. She had undergone no previous surgical procedures. Standard 4-puncture laparoscopy was performed, and all visible endometriosis lesions were first removed before proceeding to rectal resection. The avascular rectovaginal space was identified, and the rectosigmoid was mobilized cranially, releasing the vagina and increasing the final distance of the bowel anastomosis to the anal border. The rectosigmoid nodule was isolated in its entire circumference and remained restricted to the anterior wall of the bowel. It was then transfixed using a 2-0 polyglycolic suture, with the healthy proximal and distal limits of the bowel included in the suture. A 33-cm endoscopic circular stapler was introduced via the anus up to the distal limit of the lesion and opened inside the bowel lumen. By pulling the edges of the suture, the rectosigmoid nodule was introduced inside of the circular stapler. It was fired to resect the anterior rectal wall, and the anastomosis was situated at the anterior and lateral walls of the bowel. Integrity of the bowel was checked via infusion of saline solution with methylene blue dye. Gynecologic surgeons performed all of the procedures. Bowel resection took 20 minutes, and the entire surgical procedure lasted 120 minutes. The patient was discharged after 48 hours. There were no intercurrent events, either early or late postoperatively. The patient was symptom-free at 2 years of follow-up. Laparoscopic discoid excision of an anterior rectal nodule using the circular stapler is an effective option for treating selected cases of rectosigmoid endometriosis. The technique might be reproducible by gynecologic surgeons after proper training. Copyright © 2015 AAGL. Published by Elsevier Inc. All rights reserved.

Stapler-assisted closure in total laryngectomy.

PubMed

Anand, Akash G

2013-01-01

The total laryngectomy is a surgical procedure that requires technically sound reconstruction in order to preserve a patient's swallowing function. Traditionally, a handsewn technique has been utilized to accomplish this endeavor. Recent applications of surgical stapling devices have been noted in an attempt to circumvent the need for handsewn reconstruction. This paper documents the application of a surgical stapling device in reconstructing a total laryngectomy defect. A brief review of the literature is provided to compare the differences between handsewn techniques and stapling techniques.

Damage-control laparoscopic partial cholecystectomy with an endoscopic linear stapler.

PubMed

Özçınar, Beyza; Memişoğlu, Ecem; Gök, Ali Fuat Kaan; Ağcaoğlu, Orhan; Yanar, Fatih; İlhan, Mehmet; Yanar, Hakan Teoman; Günay, Kayıhan

2017-01-01

Several damage-control procedures have been described in the literature in case of severe Calot's triangle inflammation and fibrosis. In this report, we describe patients who underwent laparoscopic partial cholecystectomy using an endoscopic linear stapler. Five patients with acute cholecystitis underwent laparoscopic partial cholecystectomy in our clinic between January - December 2011. All patients had severe fibrosis and inflammation of Calot's triangle. The anterior and posterior walls of the gallbladder were totally resected if possible. The gallbladder was transected at its neck or Hartmann's pouch, leaving a remnant gallbladder pouch behind. Five patients had laparoscopic partial cholecystectomy with an endoscopic linear stapler. The main symptom of all patients on admission to the emergency room was abdominal pain. The mean time for the surgical procedure was 140 minutes (range, 120-180 minutes). Inflammation and fibrosis of Calot's triangle was detected in all patients during surgery and a phlegmonous gallbladder was detected in one patient. Surgical drains were used in all patients and no biliary leakage was detected. Remnant common bile duct calculi were detected in one patient and this patient underwent endoscopic retrograde cholangiopancreatography one month after surgery. When a reliable view of Calot's triangle cannot be obtained due to severe inflammation and fibrosis during laparoscopy, laparoscopic partial cholecystectomy seems to be a safe and feasible alternative to open surgery with an acceptable morbidity rate.

Laparoscopy-assisted sigmoid resection.

PubMed

Fowler, D L; White, S A

1991-09-01

Laparoscopic cholecystectomy has been widely accepted, and because of its many benefits, other intra-abdominal operations are now being done laparoscopically. We felt the next step in the evolution of laparoscopic surgery could be bowel resection. This paper presents two cases of laparoscopic sigmoid resection and a detailed description of the technique. Included in the technique is the use of prototype endoscopic stapling devices to divide the mesentery and bowel. The two most difficult technical decisions involved the methods for specimen removal and for completing the anastomosis. The specimen was removed through a muscle splitting incision in the left lower quadrant, positioned as a mirror image of a standard appendectomy incision. The anvil of the CEEA (end-to-end) stapler was also position in the proximal colon through this incision; the anastomosis was completed with the CEEA stapler.

Comparison of single-stapling and hemi-double-stapling methods for intracorporeal esophagojejunostomy using a circular stapler after totally laparoscopic total gastrectomy.

PubMed

Amisaki, Masataka; Kihara, Kyoichi; Endo, Kanenori; Suzuki, Kazunori; Nakamura, Seiichi; Sawata, Takashi; Shimizu, Tetsu

2016-07-01

Laparoscopic total gastrectomy is not widely performed because of the difficulty of esophagojejunal reconstruction. This study analyzed complication rates of two different methods for reconstruction by a circular stapler after totally laparoscopic total gastrectomy (TLTG). Between 2010 and 2014, clinical data of 19 patients who underwent TLTG for gastric adenocarcinoma were collected retrospectively. There were two methods to fix the anvil of a circular stapler into the distal esophagus: In the single-stapling technique (SST) group, Endo-PSI(II) was used for purse-suturing on the distal esophagus for reconstruction, and in the hemi-double-stapling technique (hemi-DST) group, the esophagus was cut by linear stapler with the entry hole of the anvil shaft opened after inserting the anvil tail. In both groups, surgical procedures were the same, except for the reconstruction. All TLTGs were performed securely without mortality. Intracorporeal laparoscopic esophagojejunal anastomosis was performed successfully for all the patients. In the hemi-DST group, four patients experienced anastomotic stenosis, three of whom required endoscopic balloon dilation. In contrast, no stenosis was seen in the SST group (p = 0.033). Anastomosis with SST is preferred to that with hemi-DST to minimize postoperative complications.

Dissection of lung parenchyma using electrocautery is a safe and acceptable method for anatomical sublobar resection

PubMed Central

2012-01-01

Background Anatomic sublobar resection is being assessed as a substitute to lobectomy for primary lung cancers. However, persistent air leak after anatomic sublobar resection is prevalent and increasing surgical morbidity and costs. The use of electrocautery is being popularized recently in anatomic sublobar resection. We have retrospectively evaluated the safety and efficacy of intersegmental plane dissection using electrocautery. Methods Between April 2009 to September 2010, 47 patients were treated with segmentectomy for clinical T1N0M0 non-small cell lung cancers. The intersegmental plane was dissected using electrocautery alone or in combination with staplers. We evaluated the methods of dividing intersegmental plane (electrocautery alone or combination with electrocautery and staplers), intraoperative blood loss, duration of chest tube placement, duration of surgery, preoperative FEV1.0 %, incidence of prolonged air leak, length of postoperative hospital stay, postoperative pulmonary function at 6 months after surgery and the cost for sealing intersegmental plane. Results Among the 47 patients, 22 patients underwent intersegmental plane dissection with electrocautery alone and 25 patients did in combination with electrocautery and staplers. The mean number of stapler cartridges used was only 1.3 in electrocautery and staplers group. Mean age, gender, number of patients whose FEV1% < 70 % were similar between two groups. There was no statistical difference between electrocautery alone and combination with electrocautery and staplers group in duration of surgery (282 vs. 290 minutes), intraoperative blood loss (203 vs.151 ml), duration of chest tube placement (3.2 vs. 3.1 days), postoperative hospital stay (11.0 vs.10.0 days), postoperative loss of FEV1.0 (13 vs.8 %), loss of FVC (11 vs. 6 %) or incidence of minor postoperative complications [9 % (2/22) vs. 16 % (4/25), p = 0.30)]. However, incidence of prolonged air leak was higher in electrocautery alone group than in combination with electrocautery and staplers group [14 % (3/22) vs. 4 % (1/25), p = 0.025)]. The cost of materials for sealing air leaks amounted to €964 per patient in the electrocautery alone group and €1594 per patient in combination with electrocautery and staplers group. Conclusions The number of patients with prolonged air leak was higher in the electrocautery alone group. The use of staplers in addition to electrocautery may lead to reduced prolonged air leak. However, the use of electrocautery for intersegmental plane dissection appeared to be safe with acceptable postoperative complications and effective in reducing costs. PMID:22554035

Dissection of lung parenchyma using electrocautery is a safe and acceptable method for anatomical sublobar resection.

PubMed

Ohtsuka, Takashi; Goto, Taichiro; Anraku, Masaki; Kohno, Mitsutomo; Izumi, Yotaro; Horinouchi, Hirohisa; Nomori, Hiroaki

2012-05-03

Anatomic sublobar resection is being assessed as a substitute to lobectomy for primary lung cancers. However, persistent air leak after anatomic sublobar resection is prevalent and increasing surgical morbidity and costs. The use of electrocautery is being popularized recently in anatomic sublobar resection. We have retrospectively evaluated the safety and efficacy of intersegmental plane dissection using electrocautery. Between April 2009 to September 2010, 47 patients were treated with segmentectomy for clinical T1N0M0 non-small cell lung cancers. The intersegmental plane was dissected using electrocautery alone or in combination with staplers. We evaluated the methods of dividing intersegmental plane (electrocautery alone or combination with electrocautery and staplers), intraoperative blood loss, duration of chest tube placement, duration of surgery, preoperative FEV1.0%, incidence of prolonged air leak, length of postoperative hospital stay, postoperative pulmonary function at 6 months after surgery and the cost for sealing intersegmental plane. Among the 47 patients, 22 patients underwent intersegmental plane dissection with electrocautery alone and 25 patients did in combination with electrocautery and staplers. The mean number of stapler cartridges used was only 1.3 in electrocautery and staplers group. Mean age, gender, number of patients whose FEV1% < 70% were similar between two groups. There was no statistical difference between electrocautery alone and combination with electrocautery and staplers group in duration of surgery (282 vs. 290 minutes), intraoperative blood loss (203 vs.151 ml), duration of chest tube placement (3.2 vs. 3.1 days), postoperative hospital stay (11.0 vs.10.0 days), postoperative loss of FEV1.0 (13 vs.8 %), loss of FVC (11 vs. 6 %) or incidence of minor postoperative complications [9 % (2/22) vs. 16 % (4/25), p = 0.30)]. However, incidence of prolonged air leak was higher in electrocautery alone group than in combination with electrocautery and staplers group [14 % (3/22) vs. 4 % (1/25), p = 0.025)]. The cost of materials for sealing air leaks amounted to €964 per patient in the electrocautery alone group and €1594 per patient in combination with electrocautery and staplers group. The number of patients with prolonged air leak was higher in the electrocautery alone group. The use of staplers in addition to electrocautery may lead to reduced prolonged air leak. However, the use of electrocautery for intersegmental plane dissection appeared to be safe with acceptable postoperative complications and effective in reducing costs.

Intracorporeal esophagojejunostomy after totally laparoscopic total gastrectomy: A single-center 7-year experience

PubMed Central

Chen, Ke; Pan, Yu; Cai, Jia-Qin; Xu, Xiao-Wu; Wu, Di; Yan, Jia-Fei; Chen, Rong-Gao; He, Yang; Mou, Yi-Ping

2016-01-01

AIM: To assess the efficacy and safety of intracorporeal esophagojejunostomy in patients undergoing laparoscopic total gastrectomy (LTG) for gastric cancer. METHODS: A retrospective review of 81 consecutive patients who underwent LTG with the same surgical team between November 2007 and July 2014 was performed. Four types of intracorporeal esophagojejunostomy using staplers or hand-sewn suturing were performed after LTG. Data on clinicopatholgoical characteristics, occurrence of complications, postoperative recovery, anastomotic time, and operation time among the surgical groups were obtained through medical records. RESULTS: The average operation time was 288.7 min, the average anastomotic time was 54.3 min, and the average estimated blood loss was 82.7 mL. There were no cases of conversion to open surgery. The first flatus was observed around 3.7 d, while the liquid diet was started, on average, from 4.9 d. The average postoperative hospital stay was 10.1 d. Postoperative complications occurred in 14 patients, nearly 17.3%. However, there were no cases of postoperative death. CONCLUSION: LTG performed with intracorporeal esophagojejunostomy using laparoscopic staplers or hand-sewn suturing is feasible and safe. The surgical results were acceptable from the perspective of minimal invasiveness. PMID:27022225

Endoscopic treatment and risk factors of postoperative anastomotic bleeding after gastrectomy for gastric cancer.

PubMed

Kim, Ki-Han; Kim, Min-Chan; Jung, Ghap-Joong; Jang, Jin-Seok; Choi, Seok-Ryeol

2012-01-01

Anastomotic leakage, bleeding, and stricture are major complications after gastrectomy. Of these complications, postoperative anastomotic bleeding is relatively rare, but lethal if not treated immediately. Of 2031 patients with gastric cancer who underwent radical gastrectomy (R0 resection) between January 2002 and December 2010, postoperative anastomotic bleeding was observed in 7 patients. The clinicopathological features, postoperative outcomes such as surgical procedures, bleeding sites and, methods used to achieve hemostasis, and the risk factors of anastomotic bleeding of these 7 patients were analyzed. Of the 2031 patients, 1613 and 418 underwent distal and total gastrectomy, respectively. The bleeding sites were as follows: Billroth-I anastomosis using a circular stapler (n = 1), Billroth-II anastomosis by manual suture (n = 5), and esophagojejunostomy using a circular stapler (n = 1). All patients were treated with endoscopic clipping or epinephrine injection. There was no further endoscopic intervention or reoperation for anastomotic bleeding. Postoperative anastomotic bleeding is an infrequent but potentially life-threatening complication. Scrupulous surgical procedures are essential for the prevention of postoperative bleeding, and endoscopy was useful for both the confirmation of bleeding and therapeutic intervention. Copyright © 2012 Surgical Associates Ltd. All rights reserved.

Intracorporeal esophagojejunostomy after totally laparoscopic total gastrectomy: A single-center 7-year experience.

PubMed

Chen, Ke; Pan, Yu; Cai, Jia-Qin; Xu, Xiao-Wu; Wu, Di; Yan, Jia-Fei; Chen, Rong-Gao; He, Yang; Mou, Yi-Ping

2016-03-28

To assess the efficacy and safety of intracorporeal esophagojejunostomy in patients undergoing laparoscopic total gastrectomy (LTG) for gastric cancer. A retrospective review of 81 consecutive patients who underwent LTG with the same surgical team between November 2007 and July 2014 was performed. Four types of intracorporeal esophagojejunostomy using staplers or hand-sewn suturing were performed after LTG. Data on clinicopatholgoical characteristics, occurrence of complications, postoperative recovery, anastomotic time, and operation time among the surgical groups were obtained through medical records. The average operation time was 288.7 min, the average anastomotic time was 54.3 min, and the average estimated blood loss was 82.7 mL. There were no cases of conversion to open surgery. The first flatus was observed around 3.7 d, while the liquid diet was started, on average, from 4.9 d. The average postoperative hospital stay was 10.1 d. Postoperative complications occurred in 14 patients, nearly 17.3%. However, there were no cases of postoperative death. LTG performed with intracorporeal esophagojejunostomy using laparoscopic staplers or hand-sewn suturing is feasible and safe. The surgical results were acceptable from the perspective of minimal invasiveness.

Finite element modelling of stapled colorectal end-to-end anastomosis: advantages of variable height stapler design.

PubMed

Nováček, V; Tran, T N; Klinge, U; Tolba, R H; Staat, M; Bronson, D G; Miesse, A M; Whiffen, J; Turquier, F

2012-10-11

The impact of surgical staplers on tissues has been studied mostly in an empirical manner. In this paper, finite element method was used to clarify the mechanics of tissue stapling and associated phenomena. Various stapling modalities and several designs of circular staplers were investigated to evaluate the impact of the device on tissues and mechanical performance of the end-to-end colorectal anastomosis. Numerical simulations demonstrated that a single row of staples is not adequate to resist leakage due to non-linear buckling and opening of the tissue layers between two adjacent staples. Compared to the single staple row configuration, significant increase in stress experienced by the tissue at the inner staple rows was observed in two and three rows designs. On the other hand, adding second and/or third staple row had no effect on strain in the tissue inside the staples. Variable height design with higher staples in outer rows significantly reduced the stresses and strains in outer rows when compared to the same configuration with flat cartridge. Copyright © 2012 Elsevier Ltd. All rights reserved.

[Stapler and manual bronchial anastomosis--results of a consecutive trial series].

PubMed

Junginger, T; Walgenbach, S; Pichlmaier, H

1989-01-01

After lobectomy and pneumonectomy in experimental evaluations stapled bronchial closures showed the lowest incidence of inflammatory reaction and the highest strength determined by leakage pressure compared with other suture material. A total of 233 lung resections-performed at Surgical University Clinic Köln-Lindenthal and the Clinic for General and Abdominal Surgery of the Johannes-Gutenberg-Universität Mainz--were reviewed. Mechanical stapling reduced the rate of bronchopleural fistulas to 2.0% compared with 7.1% after manual suturing. In parallel, mortality related to bronchial stump leakage decreased to 0.7%. Main advantages of bronchial closure with staplers are the simplicity of their use, the speed and the uniformity of the closure. Thereby stapling devices are valuable completions in pulmonary surgery.

A novel method of intracorporeal end-to-end gastrogastrostomy in laparoscopic pylorus-preserving gastrectomy for early gastric cancer, including a unique anastomotic technique: piercing the stomach with a linear stapler.

PubMed

Ohashi, Manabu; Hiki, Naoki; Ida, Satoshi; Kumagai, Koshi; Nunobe, Souya; Sano, Takeshi

2018-05-21

Delta-shaped anastomosis is usually applied for an intracorporeal gastrogastrostomy in totally laparoscopic pylorus-preserving gastrectomy (TLPPG). However, the remnant stomach is slightly twisted around the anastomosis because it connects in side-to-side fashion. To realize an intracorporeal end-to-end gastrogastrostomy using an endoscopic linear stapler, we invented a novel method including a unique anastomotic technique. In this new approach, we first made small gastrotomies at the greater and lesser curvatures of the transected antrum and then pierced it using an endoscopic linear stapler. After the pierced antrum and the proximal remnant stomach were mechanically connected, the gastrotomies and stapling lines were transected using an endoscopic linear stapler, creating an intracorporeal end-to-end gastrogastrostomy. We have named this technique the "piercing method" because piercing the stomach is essential to its implementation. Between October 2015 and June 2017, 26 patients who had clinically early gastric cancer at the middle third of the stomach without clinical evidence of lymph node metastasis underwent TLPPG involving the novel method. The 26 patients successfully underwent an intracorporeal mechanical end-to-end gastrogastrostomy by the piercing method. The median operation time of the 26 patients was 272 min (range 209-357 min). With the exception of one gastric stasis, no problems associated with the piercing method were encountered during and after surgery. The piercing method can safely create an intracorporeal mechanical end-to-end gastrogastrostomy in TLPPG. Piercing the stomach using an endoscopic linear stapler is a new technique for gastrointestinal anastomosis. This method should be considered if the surgical aim is creation of an intracorporeal end-to-end gastrogastrostomy in TLPPG.

A case of pediatric live-donor liver transplantation with a left lateral segment reduction by a linear stapler after reperfusion.

PubMed

Zenitani, Masahiro; Ueno, Takehisa; Nara, Keigo; Nakahata, Kengo; Uehara, Shuichiro; Soh, Hideki; Oue, Takaharu; Kondo, Hiroki; Nagano, Hiroaki; Usui, Noriaki

2014-09-01

In pediatric LDLT, graft reduction is sometimes required because of the graft size mismatch. Dividing the portal triad and hepatic veins with a linear stapler is a rapid and safe method of reduction. We herein present a case with a left lateral segment reduction achieved using a linear stapler after reperfusion in pediatric LDLT. The patient was a male who had previously undergone Kasai procedure for biliary atresia. We performed the LDLT with his father's lateral segment. According to the pre-operative volumetry, the GV/SLV ratio was 102.5%. As the patient's PV was narrow, sclerotic and thick, we decided to put an interposition with the IMV graft of the donor between the confluence and the graft PV. The graft PV was anastomosed to the IMV graft. The warm ischemic time was 34 min, and the cold ischemic time was 82 min. The ratio of the graft size to the recipient weight (G/R ratio) was 4.2%. After reperfusion, we found that the graft had poor perfusion and decided to reduce the graft size. We noted good perfusion in the residual area after the lateral edge was clamped with an intestinal clamp. The liver tissue was sufficiently fractured with an intestinal clamp and then was divided with a linear stapler. The final G/R ratio was 3.6%. The total length of the operation was 12 h and 20 min. The amount of blood lost was 430 mL. No surgical complications, including post-operative hemorrhage and bile leakage, were encountered. We believe that using the linear stapler decreased the duration of the operation and was an acceptable technique for reducing the graft after reperfusion. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Zenker's diverticulum: Rotterdam experience.

PubMed

Visser, L J; Hardillo, J A U; Monserez, D A; Wieringa, M H; Baatenburg de Jong, R J

2016-09-01

Different surgical techniques exist for the treatment of Zenker's diverticulum (ZD), of which minimally invasive techniques have become the standard. We reviewed our experience with management and treatment of ZD and sought to determine what type of treatment is most effective and efficient. We selected patients who underwent treatment for ZD between January 2004 and January 2014 at our tertiary referral center. All procedures were performed by ENT surgeons. The medical records were reviewed for pre- and intraoperative characteristics and follow-up. Of our 94 patients (58 male, 36 female), 75 underwent endoscopic cricopharyngeal myotomy (42 stapler, 33 laser) and 6 received treatment via transcervical approach. 13 interventions were aborted. Mean operating time was 49.0 min for stapler, 68.3 for laser and 124.0 for the transcervical approach. Its respective median post-operative admission durations were 2.0, 3.0 and 3.0 days. After the first treatment, of the 75 endoscopic procedures, 45 patients (23 stapler, 22 laser) had complete symptom resolution. In the transcervical group 4 (67 %) patients were symptom free and one patient died of complications. In the endoscopically treated patients, ten complications occurred, of which 8 G1 and 2 G2 (Clavien Dindo classification). In the transcervical group 2 complications occurred, 1 G3b and 1 G5. Both endoscopic techniques provide efficient management of Zenker's diverticulum with the stapler-assisted modality providing a shorter surgery duration and hospital admission. Although there is no significant difference in terms of complications or recurrence rates for both endoscopic techniques, it seems that stapler patients are at higher risk of having a re-intervention and of having more severe complications.

Is there difference in chronic pain after Suture and Stapler fixation method of mesh in Ventral Hernia? Is stapler fixation method quicker? A randomized controlled trial.

PubMed

Shaukat, Noureen; Jaleel, Farhat; Jawaid, Masood; Zulfiqar, Imrana

2018-01-01

Chronic pain occurs in 20-30% of patients after hernia surgery. As a consequence of this chronic pain, almost one third of patients have limitations in daily activities. Frequency and severity of this pain varies with different techniques of hernia repair. The objective of this study was to compare polypropylene suture and skin staples for securing mesh in uncomplicated ventral hernioplasty in terms of acute and chronic postoperative pain and to compare the time taken for mesh fixation between polypropylene sutures and skin stapler in ventral hernioplasty. This study was conducted in Surgery Department of Dow University Hospital, Dow University of Health Sciences, Ojha Campus and included 53 patients from Jan 2015 to Dec 2016, after taking informed consent. All patients were operated under general anesthesia by the same surgical team. Patients were randomized into two groups; in one group mesh fixed with 2/0 polypropylene suture while in other group mesh stapler was used. Time taken to apply mesh was noted in minutes from laying the mesh over anterior rectus sheath to completion of fixation by either method. The severity of post-operative pain was measured with VAS (1-10) after one week, one month and after one year after surgery. Data was analysed using SPSS version 17. Patient characteristics and operative outcome were similar in the two groups and statistically non-significant in both. Early postoperative pain was more after suture fixation but it was not statistically significant. Mean ± SD pain score was after one week 3.47±2.7 after sutures while 2.91±1.88 after stapler. After four weeks, 0.40±0.49 after suture while 0.35±0.48 after stapler fixation. In both study groups 30-34% of the patients felt some pain in follow-up after one year. Severity of pain was 0.60±0.62 after suture while 1.65±1.94 after stapler fixation which is statistically significant as well (p<0.007). Mean operative time was 15.33±6.33 minutes for suture fixation while 1.56±0.41 minutes for fixation by staples, p-value < 0.001. The method of fixation does not appear to cause significant difference in early post-operative pain but chronic pain is more after stapler fixation of mesh. However, operative time was reduced significantly in staple fixation group as compared to suture fixation group.

Disposable skin staplers for closure of linear gastrointestinal incisions in dogs.

PubMed

Schwartz, Zeev; Coolman, Bradley R

2018-02-01

To report the clinical features and outcomes of linear gastrointestinal incisions closed with skin staples in dogs. Historical cohort study. 333 client-owned dogs. Medical records from 1 private referral hospital were searched for dogs that underwent gastrointestinal surgery between November 1999 and October 2015. Cases were included if skin staplers were used to close linear gastrointestinal incisions. Information regarding preoperative, surgical, and postoperative factors was collected. Complications were diagnosed in 8 of 245 (3.27%) dogs, including 3 of 245 (1.22%) dogs that died or were euthanized, 3 of 245 (1.22%) dogs with incisional dehiscence, and 2 of 245 (0.81%) dogs with attachment of a linear foreign body to the staples at the intestinal lumen. Dehiscence was noted at the enterotomy sites in 3 dogs at a mean time of 44 hours after surgery (SD ± 6.93). Two dogs presented with another linear foreign body that was attached to the staples in the intestinal lumen at postoperative days 24 and 42. The risk factors associated with incisional dehiscence included multiple gastrointestinal incisions performed in 1 surgery (χ 2 , P < .001) and the presence of a linear foreign body (χ 2 , P = .02253). No associations were detected between dogs' age, sex, weight, surgery time, indication for surgical intervention, surgery location in the gastrointestinal tract, or surgeon experience and incisional dehiscence. Skin staplers provide safe and effective closure of gastrotomies, enterotomies, and colonotomies in dogs. This method is reliable, efficient, and affordable in the hands of veterinary surgeons with varying skill levels. © 2017 The American College of Veterinary Surgeons.

Survey on laparoscopic total gastrectomy at the 11th China-Korea-Japan Laparoscopic Gastrectomy Joint Seminar.

PubMed

Cai, Zheng-Hao; Zang, Lu; Yang, Han-Kwang; Kitano, Seigo; Zheng, Min-Hua

2017-08-01

Laparoscopic total gastrectomy (LTG) has been widely performed for gastric cancer in China, Korea, and Japan. The current status of this surgical approach needs to be investigated. During the 11th China-Korea-Japan Laparoscopic Gastrectomy Joint Seminar in Shanghai, China, on 5 March 2016, a questionnaire was completed by 65 experts in LTG. The survey included questions on surgical indication, operation team, laparoscopic instruments, and operative procedures. Of the 65 respondents, 35 (53.8%) were from China, 18 (27.7%) were from Korea, and 12 (18.5%) were from Japan. Surgeons have various indications for LTG. Among respondents, stage II gastric cancer (42.9%) was the most acceptable indication, but Japanese surgeons were more cautious on this issue (P = 0.005). Using a flexible scope was more popular with Japanese surgeons than with others (P = 0.003). A goose-neck curved grasper was used more often in China and Korea than in Japan (P = 0.006). Chinese surgeons preferred vertical subxiphoid mini-laparotomy rather than vertical transumbilical laparotomy. Intracorporeal reconstruction (73.0%) was most frequently adopted for LTG. Linear staplers (53.8%) and circular staplers (42.1%) were both popular for esophagojejunostomy. However, jejunojejunostomy was more often conducted extracorporeally (67.7%), in which case a linear stapler (86.4%) was usually selected. Significant differences were observed between the three countries with regard to reinforcement of the duodenal stump (P = 0.018) and closure of Peterson's space (P < 0.001). This survey on LTG involving surgeons from China, Korea, and Japan clearly informed the current practice of this surgical approach and will likely aid future research studies as well as clinical treatment for gastric cancer. © 2017 Japan Society for Endoscopic Surgery, Asia Endosurgery Task Force and John Wiley & Sons Australia, Ltd.

Automatic aortic anastomosis with an innovative computer-controlled circular stapler for surgical treatment of aortic aneurysm.

PubMed

Takata, Munehisa; Watanabe, Go; Ohtake, Hiroshi; Ushijima, Teruaki; Yamaguchi, Shojiro; Kikuchi, Yujiro; Yamamoto, Yoshitaka

2011-05-01

This study applied a computer-controlled mechanical stapler to vascular end-to-end anastomosis to achieve an automatic aortic anastomosis between the aorta and an artificial graft. In this experimental study, we created a mechanical end-to-end anastomotic model and assessed the strength of the anastomotic site under high pressure. We used a computer-controlled circular stapler named iDrive (Power Medical Interventions, Covidien plc, Dublin, Ireland) for the anastomosis between the porcine aorta and an artificial graft. Then the mechanically stapled group (group A) and the manually sutured group (group B) were compared 10 times, and we assessed the differences at several levels of pressure. To use a mechanical stapler in vascular anastomosis, some special preparations of both the aorta and the artificial graft are necessary to narrow the open end before the procedures. To solve this problem, we established a specially designed purse-string suture for both and finally established end-to-end vascular anastomosis. The anastomosis speed of group A was statistically significantly faster than that of group B (P < .01). The group A anastomotic sites also showed significantly more tolerance to high pressure than those of group B. The computer-controlled stapling device enabled reliable anastomosis of the aorta and the artificial graft. This study showed that mechanical vascular anastomosis with the iDrive was sufficiently strong and safe relative to manual suturing. Copyright © 2011 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

Comparison of endostapler performance in challenging tissue applications.

PubMed

Contini, Elizabeth; Whiffen, Jennifer; Bronson, Dwight

2013-01-01

Surgical staplers are frequently used in a variety of applications, demanding exacting instrument performance over a huge range of tissue compositions and disease states. The shape of a staple that is formed by a stapling device is one industry-accepted indicator of device performance; typically a B-shaped staple is considered the gold standard for staple formation. This B shape allows blood flow through the tissue, which is one important factor in the healing events that take place clinically after stapling. With the use of an animal model, this ex vivo study investigated staple formation when thick tissue endoscopic staplers were used on challenging and variable tissue. The setting was a corporate institution in the United States. Two 60-mm linear endoscopic thick tissue reloads, a varied-height stapler (VHS), and a single-height stapler (SHS) were fired on 7 different regions of porcine stomach. Resultant staple formation was assessed per region of the stomach and evaluated for proper B-shaped staple formation and staple malformation. The VHS reload had significantly better B-shaped formation (P<.001) for all regions of the stomach and reduced occurrence of malformed staples in 5 of the 7 regions compared with the SHS reload, wherein the remaining 2 regions exhibited comparable malform occurrence. This study compared 2 thick tissue reloads and found that the VHS reload had superior outcomes, with respect to staple formation, compared with the SHS reload. Copyright © 2012 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

Hilar control during laparoscopic donor nephrectomy: Practice patterns in Canada.

PubMed

Mcgregor, Thomas B; Patel, Premal; Chan, Gabriel; Sener, Alp

2017-10-01

In recent years, the method of vascular control during laparoscopic donor nephrectomy (LDN) has come under scrutiny due to catastrophic consequences of a device failure. This study sought to examine the surgical preferences of Canadian donor surgeons with regards to vascular control and their perception on the safety of these modalities. We also surveyed the experience with device malfunction and their subsequent management during LDN. An online survey was sent out to donor surgeons registered with the Canadian Society of Transplantation. Surveys were anonymous and voluntary. Descriptive statistics were used to analyze the collected responses. Recollection of the sequelae and outcomes from device malfunction were also queried. Twenty-eight of 37 surgeons (76% response rate) responded to the survey. At least one surgeon from every institution in Canada performing LDN responded to the survey. Laparoscopic stapler is the most commonly used device for securing the renal artery (61%) and renal vein (67%). Overall, surgeons felt the stapler was the safest method of securing the renal artery. Stapler misfire and clip slippage were reported by eight (28.5%) and 12 (43%) surgeons, respectively. Most cases were salvageable: laparoscopically (30%), open conversion (30%), and by hand port (5%). Slippage of a plastic locking clip resulted in one emergent laparotomy on POD#1 and one stapler misfire was converted to open resulting in donor death. Although rare, hemorrhagic complications can occur from device malfunction resulting in poor outcomes for healthy volunteers undergoing LDN. Surgeons need to remain vigilant when selecting the appropriate modality for vascular control.

Mechanical and conventional manual sutures of the bronchial stump. A comparative study of 298 surgical patients.

PubMed

Péterffy, A; Calabrese, E

1979-01-01

A U.S.-made TA-30 model stapling device was utilized to close the bronchial stump in 146 patients, while conventional manual suturing with chromic catgut was performed for the same purpose in 152 patients. The two groups were comparable in respect of pre-operative status and operative diagnosis. Patients, in whom the stapler was utilized, showed a decreased incidence of bronchial fistula (1% vs. 3%) and empyema without fistula (1% vs. 3%). The stapler, compared with conventional manual sutures, allows a simpler and swifter suture of the bronchial stump, reduces the contamination of the operative field, achieves uniform and tighter closure of the bronchus, leaves a better preserved terminal blood perfusion of the stump and utilizes a more tolerated sewing material with less resultant tissue inflammation.

Right hemihepatectomy.

PubMed

Haglund, Ulf H; Norén, Agneta; Urdzik, Jozef; Duraj, Frans F

2008-07-01

A right hemihepatectomy is frequently required for surgical removal of colorectal liver metastases. Today, this procedure can be performed quite safely provided the remaining liver is free from significant disease including steatohepatitis due to prolonged cytostatic treatment. Standard surgical techniques for liver resection are described in surgical textbooks. However, each center has developed its own modifications of important details. In this paper, we describe our technique to resect the right liver lobe using conventional surgical techniques as well as a vascular stapler and an ultrasonic dissector. This technique has proven to be quite safe, and blood loss is most often not significant despite we do not routinely apply the Pringle's manoeuvre during the division of the liver parenchyma.

Totally intracorporeal delta-shaped B-I anastomosis following laparoscopic distal gastrectomy using the Tri-Staple™ reloads on the manual Ultra handle: a prospective cohort study with historical controls.

PubMed

Man-I, Mariko; Suda, Koichi; Kikuchi, Kenji; Tanaka, Tsuyoshi; Furuta, Shimpei; Nakauchi, Masaya; Ishikawa, Ken; Ishida, Yoshinori; Uyama, Ichiro

2015-11-01

A delta-shaped anastomosis in totally laparoscopic Billroth I gastrectomy could be performed easily and sufficiently using only laparoscopic linear staplers. However, the restricted maneuverability and severe blurring of these staplers along with their limited hemostability induced strain. In this study, we determined the feasibility and safety of performing delta-shaped anastomosis using the Endo GIA™ Reloads with Tri-Staple™ Technology combined with Endo GIA™ Ultra Universal stapler (Tri-Staple) with a particular focus on short-term surgical outcomes. We performed a single-institutional prospective interventional study (UMIN 000008014). The Tri-Staple was prospectively used on 23 consecutive patients who underwent a curative totally laparoscopic Billroth I gastrectomy with delta-shaped anastomosis. These patients were matched with the 19 patients previously treated using the ENDOPATH(®) ETS Articulating Linear Cutters (ETS) on clinical and demographic characteristics. There were no differences between the groups in anastomosis-related local complications, morbidity, non-anastomosis-related local complications, total systemic complications, and short-term outcomes with the exception of significantly reduced blood loss in the Tri-Staple group (ETS vs. Tri-Staple: 37 [10-306] vs. 15 [5-210] mL, p = 0.02). Intraoperative bleeding from the staple line was significantly reduced in the Tri-Staple group. The postoperative drain indwelling period (ETS vs. Tri-Staple, 6 [4-10] vs. 4 [2-43] days, p = 0.032), fasting period (5 [3-7] vs. 3 [3-24] days, p = 0.022), and hospital stay (14 [10-47] vs. 11 [6-58] days, p = 0.025) were significantly shorter in the Tri-Staple group. There was no mortality in this series. Acceleration assessed as indices of blurring of stapler tip might have a significant adverse influence on staple-line bleeding at stapling sites. Totally laparoscopic Billroth I distal gastrectomy using Tri-Staple was feasible and safe with favorable short-term surgical outcomes. Reduced blurring while stapling may be a novel endpoint which newly developed stapling devices should target.

Circular stapler introducer: a novel device to facilitate stapled colorectal anastomosis.

PubMed

Guweidhi, Ahmed; Steffen, Rudolf; Metzger, Alejandro; Teuscher, Jürg; Flückiger, Petra; Z'graggen, Kaspar

2009-04-01

A circular stapler introducer was developed to protect the head of the circular stapler and enable atraumatic introduction and advancement of the circular stapler without interfering with the application and safety of an anastomosis. In a Phase I prospective study, we tested the feasibility and safety of the novel circular stapler introducer device in 60 consecutive patients undergoing left-sided colorectal resections. The median distance of the anastomoses from the anal verge was 12 cm (7-20, n = 60). Total morbidity was 15 percent. No mortality was observed. Handling of the circular stapler introducer was considered nonproblematic by all surgeons who participated in the study. No interference of the circular stapler introducer with the circular stapling devices used was encountered. The advancement of the stapler into the end of the colorectal stump was always possible with the aid of the circular stapler introducer. Use of the circular stapler introducer facilitates the double-stapling technique of colorectal anastomosis. The circular stapler introducer has great potential and should be tested in larger studies.

Anastomotic dehiscence after gastrectomy for cancer. Personal series.

PubMed

Lanteri, Raffaele; Rapisarda, Cristian; Santangelo, Marco; Racalbuto, Agostino; Di Cataldo, Antonio; Licata, Antonio

2007-03-01

Nowadays the risk of anastomotic dehiscence after gastrectomy still exists. So the aim of this study was to analyze our experience regarding these anastomoses. In our Surgical Unit, which is located in the Department of Surgical Sciences, Organ Transplantation and Advanced Technologies of the University of Catania, from January 1st 1985 to December 31st 2000, 249 patients underwent surgery for gastric cancer. We observed a statistically significant decrease of leaks in the third period of our study. These data demonstrate a significant decrease of anastomotic leaks with stapler in comparison to manual anastomoses.

[Rectosigmoidectomy and end to end coloanal anastomosis with mechanical stapler for treatement of Hirschsprung disease].

PubMed

Gaztambide Casellas, J; Sánchez Díaz, F; García Soldevilla, N; Argos Rodríguez, M D; Pérez Rodríguez, J

2004-04-01

The experience of the Pediatric Surgical Service of the Materno Infantil University Hospital from Málaga on surgical treatment of the Hirschsprung disease by means of a modified technique of Swenson and Rehbein operations is presented. Between 1992 and 2001 25 patients were operated of a rectosigmoidectomy. Of them, 23 were diagnosed of Hirschsprung's disease, one suffered a rectal angiodisplasia and the other one presented with a rectal stenosis secondary to a previous rectosigmoidectomy. In all of them a transabdominal rectosigmoidectomy with coloanal end to end anastomosis by means of a circular intraluminal stapler was performed. In 10 of them (group A), a modified Rehbein operation with intraabdominal anastomosis was performed. In the remaining 15 patients (group B), a modified Swenson operation with exteriorization of the aganglionic colon through the anus and extrabdominal anastomosis was performed. The postoperative course was evaluated by measuring the postoperative fasting time and the first spontaneous deposition. The medium hospital stay was of 9 days, nevertheless in 16 patients (64%) was lower than 7 days. The postoperative complications are presented. It consists in 1 anastomotic leakage (4%), postoperative enterocolitis 1 case (4%) and transient anastomotic stenosis in 4 patients (16%). All of them were treated with conservative treatment except one case of stenosis which needed a sphincterotomy. The rectosigmoidectomy and coloanal end to end anastomosis with endoluminal stapler is a safe and easy to do technique to treat the Hirschsprung's disease allowing a deep rectal resection which is very difficult to achieve by manual suture. The anastomosis is located in and extraperitoneal position, with a minimum risk of peritoneal involvement in case of anastomotic leakage. The patients presented a fast recovery, a minimum of complications and good functional result.

TRREMS procedure (transanal repair of rectocele and rectal mucosectomy with one circular stapler): a prospective multicenter trial.

PubMed

Cruz, José Vinicius; Regadas, Francisco Sergio P; Murad-Regadas, Sthela Maria; Rodrigues, Lusmar Veras; Benicio, Fernando; Leal, Rogério; Carvalho, César G; Fernandes, Margarete; Roche, Lucimar M C; Miranda, Antônio Carlos; Câmara, Lucia; Pereira, Joaquim Costa; Parra, Antonio Mallén; Leal, Vilmar Moura

2011-01-01

Since anorectocele is usually associated with mucosa prolapse and/or rectal intussusceptions, it was developed a stapled surgical technique using one circular stapler. To report the results of Transanal Repair of Rectocele and Rectal Mucosectomy with one Circular Stapler (TRREMS procedure) in the treatment of anorectocele with mucosa prolapse in a prospective multicenter trial. It was conducted by 14 surgeons and included 75 female patients, mean aged 49.6 years, with symptoms of obstructed defecation due to grade 2 (26.7%) and grade 3 (73.3%) anorectocele associated with mucosa prolapse and/or rectal intussusception (52.0%) and an average validated Wexner constipation score of 16. All patients were evaluated by a proctological examination, cinedefecography, anal manometry and colonic transit time. The TRREMS procedure consists of the manual removal of the rectocele wall with circumferential rectal mucosectomy performed with a circular stapler. The mean follow-up time was 21 months. All patients presented obstructed defecation and they persisted with symptoms despite conservative treatment. The mean operative time was 42 minutes. In 13 (17.3%) patients, bleeding from the stapled line required hemostatic suture. Stapling was incomplete in 2 (2.6%). Forty-nine patients (65.3%) required 1 hospitalization day, the remainder (34.7%) 2 days. Postoperatively, 3 (4.0%) patients complained of persistent rectal pain and 7 (9.3%) developed stricture on the stapled suture subsequently treated by stricturectomy under anesthesia (n = 1), endoscopic stricturectomy with hot biopsy forceps (n = 3) and digital dilatation (n = 3). Postoperative cinedefecography showed residual grade I anorectoceles in 8 (10.6%). The mean Wexner constipation score decreased significantly from 16 to 4 (0-4: n = 68) (6: n = 6) (7: n = 1) (P<0.0001). Current trial results suggest that TRREMS procedure is a safe and effective technique for the treatment of anorectocele associated with mucosa prolapse. The stapling technique is low-cost as requires the use of a single circular stapler.

Stapler versus scalpel resection followed by hand-sewn closure of the pancreatic remnant for distal pancreatectomy.

PubMed

Probst, Pascal; Hüttner, Felix J; Klaiber, Ulla; Knebel, Phillip; Ulrich, Alexis; Büchler, Markus W; Diener, Markus K

2015-11-06

Resections of the pancreatic body and tail reaching to the left of the superior mesenteric vein are defined as distal pancreatectomy. Most distal pancreatectomies are elective treatments for chronic pancreatitis, benign or malignant diseases, and they have high morbidity rates of up to 40%. Pancreatic fistula formation is the main source of postoperative morbidity, associated with numerous further complications. Researchers have proposed several surgical resection and closure techniques of the pancreatic remnant in an attempt to reduce these complications. The two most common techniques are scalpel resection followed by hand-sewn closure of the pancreatic remnant and stapler resection and closure. To compare the rates of pancreatic fistula in people undergoing distal pancreatectomy using scalpel resection followed by hand-sewn closure of the pancreatic remnant versus stapler resection and closure. We searched Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, EMBASE, Biosis and Science Citation Index from database inception to October 2015. We included randomised controlled trials (RCTs) comparing stapler versus scalpel resection followed by hand-sewn closure of the pancreatic remnant for distal pancreatectomy (irrespective of language or publication status). Two authors independently assessed trials for inclusion and extracted the data. Taking into consideration the clinical heterogeneity between the trials (e.g. different endpoint definitions), we analysed data using a random-effects model with Review Manager (RevMan), calculating risk ratio (RR) or mean difference (MD) with 95% confidence intervals (CI). In two eligible trials, a total of 381 participants underwent distal pancreatic resection and were randomised to closure of the pancreatic remnant either with stapler (n = 191) or scalpel resection followed by hand-sewn closure (n = 190). One was a single centre pilot RCT and the other was a multicentre blinded RCT. The single centre pilot RCT evaluated 69 participants in five intervention arms (stapler, hand-sewn, fibrin glue, mesh and pancreaticojejunostomy), although we only assessed the stapler and hand-sewn closure groups (14 and 15 participants, respectively). The multicentre RCT had two interventional arms: stapler (n = 177) and hand-sewn closure (n = 175). The rate of postoperative pancreatic fistula was the main outcome, and it occurred in 79 of 190 participants in the hand-sewn group compared to 65 of 191 participants in the stapler group. Neither the individual trials nor the meta-analysis showed a significant difference between resection techniques (RR 0.90; 95% CI 0.55 to 1.45; P = 0.66). In the same way, postoperative mortality and operation time did not differ significantly. The single centre RCT had an unclear risk of bias in the randomisation, allocation and both blinding domains. However, the much larger multicentre RCT had a low risk of bias in all domains. Due to the small number of events and the wide confidence intervals that cannot exclude clinically important benefit or harm with stapler versus hand-sewn closure, there is a serious possibility of imprecision, making the overall quality of evidence moderate. The quality of evidence is moderate and mainly based on the high weight of the results of one multicentre RCT. Unfortunately, there are no other completed RCTs on this topic except for one relevant ongoing trial. Neither stapler nor scalpel resection followed by hand-sewn closure of the pancreatic remnant for distal pancreatectomy showed any benefit compared to the other method in terms of postoperative pancreatic fistula, overall postoperative mortality or operation time. Currently, the choice of closure is left up to the preference of the individual surgeon and the anatomical characteristics of the patient. Another (non-European) multicentre trial (e.g. with an equality or non-inferiority design) would help to corroborate the findings of this meta-analysis. Future trials assessing novel methods of stump closure should compare them either with stapler or hand-sewn closure as a control group to ensure comparability of results.

Technical Feasibility of Enterotomy Closure with Knotless Barbed Suture Material (V-Loc 180) in Esophagojejunostomy Using Linear Stapler during Totally Laparoscopic Total Gastrectomy for Gastric Cancer.

PubMed

Kim, Dong Jin; Kim, Wook; Lee, Jun Hyun

2017-08-01

Intra-corporeal esophagojejunostomy (EJ) using a linear stapler creates a stapler entry hole that requires secure closure during the totally laparoscopic total gastrectomy (TLTG) procedure for gastric cancer. Since a standard method has not been established yet, the feasibility of using V-loc 180 (Covidien, Mansfield, MA, USA) suture material was evaluated in this study. During January 2012 to March 2015, 25 patients who underwent linear stapling EJ and V-loc 180 closure of remaining enterotomy were included in this study. Basic clinico-pathological characteristics, surgical outcomes, and short-term complications were analyzed. The mean patient age was 60.4 ± 8.5 years. Nineteen males and six females were included in this study. The mean body mass index was 25.3 ± 2.3 kg/m 2 . There were 22 stage-I, 2 stage-II, and 1 stage-III gastric cancer patients. The mean operation time was 240.5 ± 44.6 min, and the time for anastomosis was 38.8 ± 11.2 min. The procedures were successfully performed in all cases without any intra-operative complications. There was one case of EJ leakage that occurred at the corner of EJ staple line and not at the enterotomy closure site. The closure of the remaining enterotomy site using V-loc 180 suture following linear stapler EJ is technically feasible and safe during the TLTG procedure. However, further experience and results from other surgeons are necessary to generalize this procedure.

Technique and outcomes of laparoscopic-combined linear stapler and hand-sutured side-to-side esophagojejunostomy with Roux-en-Y reconstruction as a treatment modality in patients undergoing proximal gastrectomy for benign and malignant disease of the gastroesophageal junction.

PubMed

Esquivel, Carlos M; Ampudia, Carolina; Fridman, Abraham; Moon, Rena; Szomstein, Samuel; Rosenthal, Raul J

2014-02-01

Circular stapler and hand-sutured esophagojejunostomy has been the most popular technique utilized in patients undergoing proximal gastrectomy through Roux-en-Y reconstruction for disease processes of the gastroesophageal junction. In recent years, with the advent of laparoscopic bariatric surgical techniques and refined linear stapler cutters, surgeons have developed the linear stapler side-to-side technique as a valid option. The aim of this study is to describe our technique and review the outcomes using the Roux-en-Y reconstruction with linear staplers after laparoscopic proximal gastrectomy for malignant and benign disease. After Internal Review Board approval and with adherence to the Health Insurance Portability and Accountability Act guidelines, a retrospective review of a prospectively collected database was conducted. A total of 14 patients underwent proximal laparoscopic gastric resection at our institution during a 3-year period from January 2008 to January 2011. Sex, body mass index, prior surgeries, complications of the prior surgery, intraoperative complications, pathologic findings, postoperative complications, hospital stay, and outpatient follow-up were measured in the preoperative and postoperative period. Our patient population consisted of 9 women and 5 men, with a mean age and body mass index of 45.42 years and 35.64 kg/m, respectively. Indications for proximal gastrectomy was in 4 patients a leak at the angle of His secondary to sleeve gastrectomy for morbid obesity, 1 patient was a stricture after a vertical banded gastroplasty, 1 patient a revision of a eroded gastric band, 1 patient a revision of a eroded mesh secondary to a hiatal hernia repair, 1 patient a conversion of a failed Nissen, 3 patients had a total gastrectomy due to a stage 2 gastric cancer, and 1 patient a gastrointestinal stromal tumor. There were no intraoperative complications. All the procedures were completed laparoscopically. The mean operative time was 137.16 minutes. The mean hospital stay was 7.6 days. One patient had a postoperative stricture at the esophagojejunal anastomosis that required multiple dilatations. All patients with gastric cancer are free of tumor recurrence. The use of a laparoscopic proximal gastrectomy with Roux-en-Y reconstruction through combined side-to-side linear stapler and hand-sewn esophagojejunal anastomosis seems to be a feasible and safe approach.

Laparoscopic mesh fixation using laser-assisted tissue soldering in a porcine model.

PubMed

Lanzafame, Raymond J; Soltz, Barbara A; Stadler, Istvan; Soltz, Robert

2009-01-01

Animal studies using open surgical models indicate that collagen solder is capable of fixation of surgical meshes without interfering with tissue integration, increasing adhesions, or increasing inflammation intraperitoneally. This study describes development of instrumentation and techniques for laparoscopic herniorrhaphy using laser-assisted soldering technology. Anesthetized 20 kg to 25 kg female Yorkshire pigs underwent laparoscopy with a 3-trocar technique. Parietex TET, Parietex TEC, and Prolene mesh segments (5 x 5 cm) were embedded in 55% collagen solder. Segments were inserted by using a specially designed introducer and affixed to the peritoneum by using prototype laser devices (1.45 micro, 4.5 W continuous wave, 5-mm spot, 55 degrees C set temperature) and a custom laparoscopic handpiece (IPOM). Parietex PCO mesh was inserted and affixed using the Endo-hernia stapler (Control). Animals were recovered and underwent second-look laparoscopy at 6 weeks. Mesh sites were harvested after animals were euthanized. The mesh-solder constructs were easily inserted and affixed in an IPOM approach. Prolene mesh tended to curl at its edges as the solder was melted. Postoperative healing was similar to that in Control segments in all cases. Collagen-based tissue soldering permits normal wound healing and may mitigate or reduce the use of staples or other foreign bodies for laparoscopic mesh fixation, prevent tissue ischemia and possibly nerve entrapment, which result in severe postoperative pain and morbidity. Laser-assisted mesh fixation is a promising alternative for laparoscopic herniorrhaphy. Further development of this strategy is warranted.

Closure of the pancreas in distal pancreatectomy: comparison between bare stapler and reinforced stapler.

PubMed

Kurahara, Hiroshi; Maemura, Kosei; Mataki, Yuko; Sakoda, Masahiko; Iino, Satoshi; Hiwatashi, Kiyokazu; Ishigami, Sumiya; Ueno, Shinichi; Shinchi, Hiroyuki; Natsugoe, Shoji

2014-01-01

Pancreatic fistula (PF) is a major complication after distal pancreatectomy (DP). Popularization of laparoscopic surgery for DP has promoted the use of stapler for transection and closing of the pancreas. We reviewed the medical records of 50 consecutive patients who underwent DP with stapler. Patients were divided into 2 groups: bare stapler (n=36) and reinforced stapler (n=14). We assessed the incidence of postoperative PF, systemic inflammatory response syndrome (SIRS), and intra-abdominal fluid collection on postoperative day 7. The numbers of patients who developed grade A, grade B, and grade C PF were 17 (34%), 6 (12%), and 0, respectively. The incidence of postoperative PF was significantly lower in the reinforced stapler group (p=0.017). None of the patients in the reinforced stapler group developed grade B PF. Patients in the bare stapler group showed significantly higher incidence of postoperative SIRS (p=0.046), more extensive fluid collection (p=0.020), and longer postoperative hospital stay (p=0.023). Decreased leakage of postoperative pancreatic juice into the abdominal cavity associated with the usage of the reinforced stapler may lead to reduced inflammatory reaction, low incidence of PF, and early hospital discharge.

Loop ileostomy closure: comparison of cost effectiveness between suture and stapler.

PubMed

Horisberger, Karoline; Beldi, Guido; Candinas, Daniel

2010-12-01

Closure of loop ileostomy can be safely performed using sutures or staplers. The aim of the present study was to compare the cost effectiveness of three different techniques. A total of 128 consecutive patients who underwent closure of loop ileostomy between January 2002 and December 2008 were analyzed retrospectively. The primary outcome parameter was operative cost. Closure of ileostomy was performed in 66 patients with hand-sewn anastomosis, in 25 patients with stapler only, and in 37 patients with a combination of stapler and suture. There were no differences in terms of early and late postoperative complications. Operative time was significantly longer for "suture only" (101.4 ± 26 min) than for "stapler/suture" (-4.9 min) and "stapler only" (-17.8 min); the difference between the three groups is significant (p = 0.05). Duration of hospital stay was not different among the three groups. Operative costs with "stapler/suture" (1,755.9 ± 355.6 EUR) were significantly higher than with "suture only" (-254 EUR; p = 0.001) and "stapler only" (-236 EUR; p = 0.005). Operative time using the stapler only is significantly shorter than with hand-sewn anastomosis or combinations of stapler and suture. Operative costs are significantly higher for a procedure that includes suture and stapler.

[Recurrent variceal bleeding in a patient with portal and splenic vein thrombosis secondary to complex thrombophilia].

PubMed

Ławniczak, Małgorzata; Raszeja-Wyszomirska, Joanna; Marlicz, Wojciech; Białek, Andrzej; Wiechowska-Kozłowska, Anna; Lubikowski, Jerzy; Wójcicki, Maciej; Starzyńska, Teresa

2008-08-01

Thrombophilia in adults is one of main causes of portal vein thrombosis. Esophageal and gastric varices, ascites and hypersplenism are well known complications of portal hypertension. There are controversial issues on the management, especially anticoagulant therapy and surgical treatment of these patients. We present a 42-years old woman with a history of three acute coronary episodes suffering from recurrent variceal bleeding due to portal and splenic vein thrombosis in the course of myeloproliferative disorder and protein C deficiency. It was 10 months delay of diagnosis. She was successfully treated with medical and surgical treatment (esophageal stapler transection, cardial devascularization, and splenectomy). In the paper we discuss complexity of diagnosis and surgical treatment.

Ultrastructural analysis of different-made staplers' staples.

PubMed

Gentilli, S; Portigliotti, L; Aronici, M; Ferrante, D; Surico, D; Milanesio, M; Gianotti, V; Gatti, G; Addante, A; Garavoglia, M

2012-10-01

Recently, Chinese-made mechanical staplers with lower price respect to American-made ones have been introduced in clinical practice. In literature, small case series compare the clinical outcomes of different staplers concluding that the new stapler devices perform as well as the American ones. The aim of this study is to compare with an ultrastructural analysis the staples of different staplers in order to verify the existence of differences that might explain significant price disparity and condition clinical outcomes. Each stapler was subjected to morphological analysis, energy dispersive X-Ray spectroscopy, metal release assessment followed by inductively coupled plasma mass spectroscopy. P-values were considered statistically significant when <0.05. Autosuture staples have square section whereas the other American one and Chinese made staples have round sections. Roughness index and chips presence before and after ageing tests were comparable for all samples except for Ethicon Endo-Surgery stapler. Energy dispersive X-Ray spectroscopy showed that all staplers are made of pure Titanium but Ethicon Endo-Surgery staples are made with an alloy. Metal release analysis release statistically significant differences between samples in simulated body fluid 20 days solution (P=0.002) and in Aquaregia at 14 days solution. Discussion. Stapling devices have became routinely used in gastrointestinal surgery mainly because of operative time reduction. Recently, new Chinese-made mechanical staplers, with significantly lower prices, have been introduced in clinical practice. In literature, there are some studies that compare clinical outcomes of American-made and Chinese-made staplers on small groups of patients but doesn't exist any work which consider structural differences between traditional and new devices. In our study, for the first time, we propose a comparison between two American-made staplers and three Chinese-made staplers which evaluate morphology, metal composition and chemical staples release. Our study suggest that there are some ultrastructural differences between commercially available staplers with no correlation to price disparity. More studies are needed to confirm our results and to verify if our findings could condition clinical outcomes.

Device-tissue interactions: a collaborative communications system.

PubMed

Chekan, Edward; Whelan, Richard L; Feng, Alexander H

2013-07-29

Medical devices, including surgical staplers, energy-based devices, and access enabling devices, are used routinely today in the majority of surgical procedures. Although these technically advanced devices have proved to be of immense benefit to both surgeons and patients, their rapid development and continuous improvement have had the unintended consequence of creating a knowledge gap for surgeons due to a lack of adequate training and educational programs. Thus, there is an unmet need in the surgical community to collect existing data on device-tissue interactions and subsequently develop research and educational programs to fill this gap in surgical training. Gathering data and developing these new programs will require collaboration between doctors, engineers, and scientists, from both clinical practice and industry. This paper presents a communications system to enable this unique collaboration that can potentially result in significantly improved patient care.

Comparison of carbon dioxide laser-assisted versus stapler-assisted endoscopic cricopharyngeal myotomy.

PubMed

Pollei, Taylor R; Hinni, Michael L; Hayden, Richard E; Lott, David G; Mors, Matthew B

2013-09-01

We directly compared endoscopic carbon dioxide (CO2) laser and stapler treatment methods for both cricopharyngeal hypertrophy (CPH) and Zenker's diverticulum (ZD). We performed a single-institution retrospective chart review of 153 patients who underwent either CO2 laser-assisted or stapler-assisted endoscopic cricopharyngeal myotomy (CPM). Isolated CPH was more likely to be treated with the CO2 laser than by stapler techniques. The ZD pouch size decreased significantly after surgery in both laser (p = 0.04) and stapler (p = 0.008) groups. The average duration of the procedure for CPM was longer for the laser than for the stapler (p = 0.01). Both techniques were successful when used in revision procedures. The overall complication rates were not statistically significantly different. Laser surgery trended toward a higher rate of major complications (2.4% versus 0%). Symptomatic recurrence was more likely after stapler surgery (p = 0.002). The rates of revision surgery were similar in the two groups (3.3% for laser and 4.3% for stapler). In the treatment of isolated CPH or ZD, stapler-assisted endoscopic surgery results in a shorter operative time, whereas laser-assisted CPM results in a decreased incidence of symptomatic recurrence.

Stapler vs suture closure of pancreatic remnant after distal pancreatectomy: a meta-analysis.

PubMed

Zhou, Wei; Lv, Ran; Wang, Xianfa; Mou, Yiping; Cai, Xiujun; Herr, Ingrid

2010-10-01

Suture closure and stapler closure of the pancreatic remnant after distal pancreatectomy are the techniques used most often. The ideal choice remains a matter of debate. Five bibliographic databases covering 1970 to July 2009 were searched. Sixteen articles met the inclusion criteria. Stapler closure was performed in 671 patients, while suture closure was conducted in 1,615 patients. The pancreatic fistula rate ranged from 0% to 40.0% for stapler closure of the pancreatic stump and from 9.3% to 45.7% for the suture closure technique. There were no significant difference between the stapler and suture closure groups with respect to the pancreatic fistula formation rate (22.1% vs 31.2%; odds ratio, .85; 95% confidence interval, .66-1.08), although there was a trend toward favoring stapler closure. In 4 studies including 437 patients, stapler closure was associated with a trend (not statistically significant) toward a reduction in intra-abdominal abscess (odds ratio, .53; 95% confidence interval, .24-1.15). No significant differences occur between suture and stapler closure with respect to the pancreatic fistula or intra-abdominal abscess after distal pancreatectomy, though there is a trend favoring stapler closure. Copyright © 2010 Elsevier Inc. All rights reserved.

Two-step method for creating a gastric tube during laparoscopic-thoracoscopic Ivor-Lewis esophagectomy.

PubMed

Liu, Yu; Li, Ji-Jia; Zu, Peng; Liu, Hong-Xu; Yu, Zhan-Wu; Ren, Yi

2017-12-07

To introduce a two-step method for creating a gastric tube during laparoscopic-thoracoscopic Ivor-Lewis esophagectomy and assess its clinical application. One hundred and twenty-two patients with middle or lower esophageal cancer who underwent laparoscopic-thoracoscopic Ivor-Lewis esophagectomy at Liaoning Cancer Hospital and Institute from March 2014 to March 2016 were included in this study, and divided into two groups based on the procedure used for creating a gastric tube. One group used a two-step method for creating a gastric tube, and the other group used the conventional method. The two groups were compared regarding the operating time, surgical complications, and number of stapler cartridges used. The mean operating time was significantly shorter in the two-step method group than in the conventional method group [238 (179-293) min vs 272 (189-347) min, P < 0.01]. No postoperative death occurred in either group. There was no significant difference in the rate of complications [14 (21.9%) vs 13 (22.4%), P = 0.55] or mean number of stapler cartridges used [5 (4-6) vs 5.2 (5-6), P = 0.007] between the two groups. The two-step method for creating a gastric tube during laparoscopic-thoracoscopic Ivor-Lewis esophagectomy has the advantages of simple operation, minimal damage to the tubular stomach, and reduced use of stapler cartridges.

Laparoscopic radical cystectomy with intracorporeal orthotopic ileal neobladder: technique and clinical outcomes.

PubMed

Shao, Pengfei; Li, Pu; Ju, Xiaobing; Qin, Chao; Li, Jie; Lv, Qiang; Meng, Xiaoxin; Yin, Changjun

2015-02-01

To study the feasibility and safety of laparoscopic radical cystectomy with intracorporeal orthotopic ileal neobladder and to evaluate the role of endoscopic stapling in neobladder construction. Fifty-five patients with bladder cancer who underwent laparoscopic radical cystectomy were retrospectively examined. Extended pelvic lymph node dissection was performed before cystectomy. An ileal segment of 50 cm was harvested to construct a U-shaped reservoir. The bottom of the reservoir was anastomosed with the posterior urethra. Twenty-five patients underwent neobladder construction by manual suturing and 30 patients by endoscopic stapler suturing. The mean operative time was 346 minutes, and mean neobladder construction time was 230 minutes. The median estimated blood loss was 500 mL, and 17 patients received intraoperative transfusion. Postoperative complications included 2 cases of urine leakage, 7 cases of pyelonephritis, 4 cases of incomplete bowel obstruction, 1 case of anastomotic stricture, and 1 case of death. Endoscopic stapler suturing for neobladder construction took significantly less time than manual suturing. However, neobladder stones were found in 2 patients who underwent operation using endoscopic suturing, and the stones were removed cystoscopically. The functional outcomes of the 2 constructive methods were comparable. Laparoscopic radical cystectomy with intracorporeal orthotopic neobladder is safe and feasible for experienced laparoscopic surgeons. Application of endoscopic stapler simplifies the surgical procedure while increasing the risk of neobladder stone formation. Copyright © 2015 Elsevier Inc. All rights reserved.

Robotic Lobectomy Utilizing the Robotic Stapler.

PubMed

Pearlstein, Daryl Phillip

2016-12-01

A drawback of robotic lobectomy is the inability of the operating surgeon to perform stapler division of the pulmonary vessels and bronchi. With the advent of the robotic stapler, the surgeon is able to control this instrument from the console. The robotic stapler presents certain challenges. This article outlines techniques to use the robotic stapler for the safe and predictable performance of lobectomies. Copyright © 2016 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Assessment of the Results of Surgical Treatment of Zenker'S Diverticulum in Own Material.

PubMed

Bobkiewicz, Adam; Banasiewicz, Tomasz; Krokowicz, Łukasz; Dryjas, Andrzej; Wykrętowicz, Mateusz; Katulska, Katarzyna; Borejsza-Wysocki, Maciej; Malinger, Stanisław; Drews, Michał

2015-03-01

Zenker diverticulum (ZD) is the most common type of diverticula of the esophagus. Most often refers to men with a peak incidence in the seventh and eighth decade of life. In the majority diverticula remains asymptomatic and in patients with symptomatic course of the disease symptoms are often nonspecific. Aim of the study was to present the authors' own experience in surgical treatment of Zenker diverticulum. In this paper we present an analysis of 31 patients with confirmed ZD treated surgically at the Clinic in 2004-2014. Patients were analyzed in terms of age, gender, clinical symptoms, diverticulum size, type of surgery, the time to return to the oral intake, hospital stay and perioperative complications. 22 men and 9 women were enrolled it this study. The mean age of the patients was 64.8 (SD, 10.7; in the range of 28 to 82 years). 29 patients (93.5%) underwent resection of the diverticulum, while diverticulopexy was performed in two patients. In 25 (80.6%) cases stapler device was used, while in 4 (12.9%) resection was performed manually. The average size of resected diverticulum was 4.9 cm (SD, 1.5). Following the surgery in four patients (12.9%) complications were present. The average operating time was 118.7 minutes (SD, 42.2, in the range of 50 to 240 minutes). The mean length of hospital stay was 9.3 (SD, 3.3). Surgical treatment of ZD is associated with high effectiveness and low recurrence rate. Despite the advantages of endoscopic techniques, surgical treatment is characterized by one- stage procedure. The use of mechanical suture (stapler) significantly improves the operation, although on the basis of our own analysis there was no superiority revealed over hand sewn. Unquestionable adventage of classical technique is the opportunity to histopathological evaluation of resected diverticulum what is impossible to achieve in endoscopic techniques.

Lung Biopsies with the Curved Radial Reload™ Stapler.

PubMed

ElSaegh, Mohamed Moneer; Petsa, Afroditi; Dunning, Joel

2016-04-01

We describe our experience at the James Cook University Hospital (UK) in using the curved Radial Reload™ (RR) stapler (Medtronic, Dublin, Ireland) for lung wedge resections, which is an endoscopic stapler used mainly in endoscopic general surgery. A single center experience (James Cook University Hospital) for patients who had superficial or deep video-assisted thoracoscopic surgery (VATS) lung wedge resection, using the curved RR stapler. Seven patients had superficial or deep VATS lung biopsies-their ages ranged from 38 to 75 years, with a median length of hospital stay of two days (one to six days), and a mean length of hospital stay of 2.5 days. No complications were encountered. The curved RR stapler is effective in several situations and allows fewer firing of staplers. Our experience would suggest that they are as haemostatic and pneumostatic as the straight staplers and can be used effectively in both superficial and deep lung biopsies.

A novel narrow profile articulating powered vascular stapler provides superior access and haemostasis equivalent to conventional devices†

PubMed Central

Ng, Calvin S.H.; Pickens, Allan; Siegel, Julianne M.; Clymer, Jeffrey W.; Cummings, John F.

2016-01-01

OBJECTIVE Current endoscopic transection devices are not optimized to meet the unique challenges posed by the task of vessel transection in difficult-to-access locations within the pleural cavity. The ECHELON FLEX™ powered vascular stapler (PVS) has been designed with four rows of staples instead of six, to decrease its size and enable more precise placement on fragile pulmonary vessels, using a narrower anvil than other commercially available transecting devices. This study was performed to determine whether the reduced number of staple rows affects haemostasis, and to assess surgeons' initial impression of the smaller stapler during in vivo usage. METHODS The new four-row stapler was compared with commercially available six-row articulating staplers via expert graders using a validated scale of haemostasis in vivo after application on porcine gastroepiploic pedicles and other thin- and thick-walled vessels. The new stapler was then compared with current products by practising thoracic surgeons (n = 27) during in vivo usage of simulated pulmonary procedures in a porcine model. The surgeons were also surveyed on the key attributes of the four-row stapler in relation to the six-row predicates. RESULTS Haemostasis evaluated on an ordered scale was clinically equivalent between the test and predicate staplers, and was deemed acceptable for all thin- and thick-vascular tissue applications. Surgeons found no difference in haemostasis between the four- and six-row staplers (P = 0.486), and judged the four-row stapler superior in terms of access, reduced need for dissection, reduced stress of surgeon and precise control (P < 0.001 for all). CONCLUSIONS The new ECHELON FLEX™ PVS provides haemostasis equivalent to six-row staplers. With a smaller anvil, narrower shaft and wider angle of articulation, the PVS demonstrated improved access capability for pulmonary vessel procedures. PMID:26464450

Risk factors associated with delayed gastric emptying after subtotal gastrectomy with Billroth-I anastomosis using circular stapler for early gastric cancer patients.

PubMed

Kim, Ki Han; Kim, Min Chan; Jung, Ghap Joong

2012-11-01

Gastric surgery may potentiate delayed gastric emptying. Billroth I gastroduodenostomy using a circular stapler is the most preferable reconstruction method. The purpose of this study is to analyze the risk factors associated with delayed gastric emptying after radical subtotal gastrectomy with Billroth I anastomosis using a stapler for early gastric cancer. Three hundred and seventy-eight patients who underwent circular stapled Billroth I gastroduodenostomy after subtotal gastrectomy due to early gastric cancer were analyzed retrospectively. One hundred and eighty-two patients had Billroth I anastomosis using a 25 mm diameter circular stapler, and 196 patients had anastomosis with a 28 or 29 mm diameter circular stapler. Clinicopathological features and postoperative outcomes were evaluated and compared between the two groups. Delayed gastric emptying was diagnosed by symptoms and simple abdomen X-ray with or without upper gastrointestinal series or endoscopy. Postoperative delayed gastric emptying was found in 12 (3.2%) of the 378 patients. Among all the variables, distal margin and circular stapler diameter were significantly different between the cases with delayed gastric emptying and no delayed gastric emptying. There were statistically significant differences in sex, body mass index, comorbidity, complication, and operation type according to circular stapler diameter. In both univariate and multivariate logistic regression analyses, only the stapler diameter was found to be a significant factor affecting delayed gastric emptying (P = 0.040). In this study, the circular stapler diameter was one of the most significant predictable factors of delayed gastric emptying for Billroth I gastroduodenostomy. The use of a 28 or 29 mm diameter circular stapler rather than a 25 mm diameter stapler in stapled gastroduodenostomy for early gastric cancer can reduce postoperative delayed gastric emptying associated with anastomosic stenosis or edema with relative safety.

A Single Institution Review of Initial Application of a 5-mm Stapler.

PubMed

Rogers, Andrew P; Zens, Tiffany J; Kohler, Jonathan E; Le, Hau D; Nichol, Peter F; Leys, Charles M

2016-08-01

Operating in small spaces presents physical constraints that can be even more challenging in minimally invasive operations. Recently, a 5-mm stapler was approved for use in general surgery and pediatric surgery. Here, we present our initial experience using the 5-mm stapler in pediatric general surgery. A retrospective chart review was conducted to identify cases using the 5-mm stapler at our institution. Demographic data included age (in months) and weight (in kilograms). Operative data included indication for use, number of loads used, complications related to 5-mm stapler use, and interventions to address complications. A second review focused on patients undergoing the same operations, but using a 10-mm stapler. A total of 60 staple loads were deployed in 32 procedures. There were four adverse outcomes, all recognized intraoperatively. One bleed resulted from application on irradiated tissue and another bleed from application to a small noninflamed mesoappendix. A bronchial staple line leak resulted from improper stapler loading, and a bowel anastomosis leak was oversewn with a single stitch. When compared with 32 matched cases using a 10-mm stapler, there was no difference in age (5-mm = 39.11 months, 10-mm = 50.21 months, P = .49) or weight (5-mm = 16.34 kg, 10-mm = 19.93 kg, P = .51). A total of 60 staple applications were used, with one bleed noted. There was no significant difference in overall complication rate (5-mm rate = 4/60, 10-mm rate = 1/60; P = .36). Our initial experience suggests that although there were more complications with the 5-mm stapler, there is no statistically significant difference in complication rates when compared with the 10-mm stapler. Furthermore, the 5-mm stapler complications can be corrected with device training and proper patient selection. In appropriately selected pediatric surgery cases with size limitations, the 5-mm stapler can be used to minimize the invasiveness of the operation.

Giant Meckel’s diverticulum: An exceptional cause of intestinal obstruction

PubMed Central

Akbulut, Sami; Yagmur, Yusuf

2014-01-01

Meckel’s diverticulum (MD) results from incomplete involution of the proximal portion of the vitelline (also known as the omphalomesenteric) duct during weeks 5-7 of foetal development. Although MD is the most commonly diagnosed congenital gastrointestinal anomaly, it is estimated to affect only 2% of the population worldwide. Most cases are asymptomatic, and diagnosis is often made following investigation of unexplained gastrointestinal bleeding, perforation, inflammation or obstruction that prompt clinic presentation. While MD range in size from 1-10 cm, cases of giant MD (≥ 5 cm) are relatively rare and associated with more severe forms of the complications, especially for obstruction. Herein, we report a case of giant MD with secondary small bowel obstruction in an adult male that was successfully managed by surgical resection and anastomosis created with endoscopic stapler device (80 mm, endo-GIA stapler). Patient was discharged on post-operative day 6 without any complications. Histopathologic examination indicated Meckel’s diverticulitis without gastric or pancreatic metaplasia. PMID:24672650

Laparoscopic Mesh Fixation Using Laser-Assisted Tissue Soldering in a Porcine Model

PubMed Central

Soltz, Barbara A.; Stadler, Istvan; Soltz, Robert

2009-01-01

Background and Objective: Animal studies using open surgical models indicate that collagen solder is capable of fixation of surgical meshes without interfering with tissue integration, increasing adhesions, or increasing inflammation intraperitoneally. This study describes development of instrumentation and techniques for laparoscopic herniorrhaphy using laser-assisted soldering technology. Study Design and Methods: Anesthetized 20 kg to 25 kg female Yorkshire pigs underwent laparoscopy with a 3-trocar technique. Parietex TET, Parietex TEC, and Prolene mesh segments (5 × 5 cm) were embedded in 55% collagen solder. Segments were inserted by using a specially designed introducer and affixed to the peritoneum by using prototype laser devices (1.45 µ, 4.5 W continuous wave, 5-mm spot, 55° C set temperature) and a custom laparoscopic handpiece (IPOM). Parietex PCO mesh was inserted and affixed using the Endo-hernia stapler (Control). Animals were recovered and underwent second-look laparoscopy at 6 weeks. Mesh sites were harvested after animals were euthanized. Results: The mesh-solder constructs were easily inserted and affixed in an IPOM approach. Prolene mesh tended to curl at its edges as the solder was melted. Postoperative healing was similar to that in Control segments in all cases. Discussion and Conclusion: Collagen-based tissue soldering permits normal wound healing and may mitigate or reduce the use of staples or other foreign bodies for laparoscopic mesh fixation, prevent tissue ischemia and possibly nerve entrapment, which result in severe postoperative pain and morbidity. Laser-assisted mesh fixation is a promising alternative for laparoscopic herniorrhaphy. Further development of this strategy is warranted. PMID:19793465

Use of the circular compression stapler and circular mechanical stapler in the end-to-side transanal colorectal anastomosis after left colon and rectal resections A single center experience.

PubMed

Pironi, Daniele; Vendettuoli, Maurizio; Pontone, Stefano; Panarese, Alessandra; Arcieri, Stefano; Filippini, Angelo; Grimaldi, Gianmarco

2016-01-01

The aim of our study was to compare the efficacy of the circular compression stapler and the circular mechanical stapler in transanal colorectal anastomosis after left colectomy or anterior rectal resection. We performed a retrospective analysis of 10 patients with disease of the, sigmoid colon or rectum (carcinoma or diverticular disease) who underwent left colectomy or anterior rectal resection with end-to-side transanal colorectal anastomosis. A follow-up was planned for all patients at 1, 3 and 6 months after surgery and the anastomosis was evaluated by colonoscopy at 1 year. In all patients an end-to-side transanal colorectal anastomosis was performed using a circular compression stapler (CCS group) or circular mechanical staplers with titanium staples (CMS group). The mean distance of the anastomosis from the anal margin was 6.4 ± 1.5 cm in the CCS group and 18.2 ± 11.2 cm in the CMS group. All patients in the CCS group expelled the ring after a mean time of 8.2 postoperative days. At 12 months colonoscopy revealed that all CCS patients had a satisfactory anastomosis with mean size of the colic lumen at the level of anastomotic line of 26.3 mm. In our experience the circular compression stapler a valuable alternative to the circular mechanical stapler for the creation of transanal colorectal anastomosis, in line with the relevant literature. Anastomotic leakage, Anastomotic stenosis, Circular compression stapler, Circular mechanical stapler, Transanal colorectal anastomosis.

[The application status of the linear stapler device in the total laryngectomy].

PubMed

Wang, W U; Wei, X L; Su, J P

2017-01-01

Summary It is very obvious that the linear stapler can shorten the operation time, reduce the incidence of pharyngeal fistula, and shorten the oral feeding time in total laryngectomy. However the stapler was used in the total laryngectomy not as widespread as in gastrointestinal surgery. In order to further understanding the function of the linear stapler device in the total laryngectomy, the stapler's composition, working principle, classification，method to use, operation method, and application of advantages and disadvantages will be reviewed. Copyright© by the Editorial Department of Journal of Clinical Otorhinolaryngology Head and Neck Surgery.

A Single Institution Review of Initial Application of a 5-mm Stapler

PubMed Central

Zens, Tiffany J.; Kohler, Jonathan E.; Le, Hau D.; Nichol, Peter F.; Leys, Charles M.

2016-01-01

Abstract Background: Operating in small spaces presents physical constraints that can be even more challenging in minimally invasive operations. Recently, a 5-mm stapler was approved for use in general surgery and pediatric surgery. Here, we present our initial experience using the 5-mm stapler in pediatric general surgery. Materials and Methods: A retrospective chart review was conducted to identify cases using the 5-mm stapler at our institution. Demographic data included age (in months) and weight (in kilograms). Operative data included indication for use, number of loads used, complications related to 5-mm stapler use, and interventions to address complications. A second review focused on patients undergoing the same operations, but using a 10-mm stapler. Results: A total of 60 staple loads were deployed in 32 procedures. There were four adverse outcomes, all recognized intraoperatively. One bleed resulted from application on irradiated tissue and another bleed from application to a small noninflamed mesoappendix. A bronchial staple line leak resulted from improper stapler loading, and a bowel anastomosis leak was oversewn with a single stitch. When compared with 32 matched cases using a 10-mm stapler, there was no difference in age (5-mm = 39.11 months, 10-mm = 50.21 months, P = .49) or weight (5-mm = 16.34 kg, 10-mm = 19.93 kg, P = .51). A total of 60 staple applications were used, with one bleed noted. There was no significant difference in overall complication rate (5-mm rate = 4/60, 10-mm rate = 1/60; P = .36). Conclusion: Our initial experience suggests that although there were more complications with the 5-mm stapler, there is no statistically significant difference in complication rates when compared with the 10-mm stapler. Furthermore, the 5-mm stapler complications can be corrected with device training and proper patient selection. In appropriately selected pediatric surgery cases with size limitations, the 5-mm stapler can be used to minimize the invasiveness of the operation. PMID:27398952

A novel narrow profile articulating powered vascular stapler provides superior access and haemostasis equivalent to conventional devices†.

PubMed

Ng, Calvin S H; Pickens, Allan; Siegel, Julianne M; Clymer, Jeffrey W; Cummings, John F

2016-01-01

Current endoscopic transection devices are not optimized to meet the unique challenges posed by the task of vessel transection in difficult-to-access locations within the pleural cavity. The ECHELON FLEX™ powered vascular stapler (PVS) has been designed with four rows of staples instead of six, to decrease its size and enable more precise placement on fragile pulmonary vessels, using a narrower anvil than other commercially available transecting devices. This study was performed to determine whether the reduced number of staple rows affects haemostasis, and to assess surgeons' initial impression of the smaller stapler during in vivo usage. The new four-row stapler was compared with commercially available six-row articulating staplers via expert graders using a validated scale of haemostasis in vivo after application on porcine gastroepiploic pedicles and other thin- and thick-walled vessels. The new stapler was then compared with current products by practising thoracic surgeons (n = 27) during in vivo usage of simulated pulmonary procedures in a porcine model. The surgeons were also surveyed on the key attributes of the four-row stapler in relation to the six-row predicates. Haemostasis evaluated on an ordered scale was clinically equivalent between the test and predicate staplers, and was deemed acceptable for all thin- and thick-vascular tissue applications. Surgeons found no difference in haemostasis between the four- and six-row staplers (P = 0.486), and judged the four-row stapler superior in terms of access, reduced need for dissection, reduced stress of surgeon and precise control (P < 0.001 for all). The new ECHELON FLEX™ PVS provides haemostasis equivalent to six-row staplers. With a smaller anvil, narrower shaft and wider angle of articulation, the PVS demonstrated improved access capability for pulmonary vessel procedures. © The Author 2015. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery.

Risk factors associated with delayed gastric emptying after subtotal gastrectomy with Billroth-I anastomosis using circular stapler for early gastric cancer patients

PubMed Central

Kim, Ki Han; Jung, Ghap Joong

2012-01-01

Purpose Gastric surgery may potentiate delayed gastric emptying. Billroth I gastroduodenostomy using a circular stapler is the most preferable reconstruction method. The purpose of this study is to analyze the risk factors associated with delayed gastric emptying after radical subtotal gastrectomy with Billroth I anastomosis using a stapler for early gastric cancer. Methods Three hundred and seventy-eight patients who underwent circular stapled Billroth I gastroduodenostomy after subtotal gastrectomy due to early gastric cancer were analyzed retrospectively. One hundred and eighty-two patients had Billroth I anastomosis using a 25 mm diameter circular stapler, and 196 patients had anastomosis with a 28 or 29 mm diameter circular stapler. Clinicopathological features and postoperative outcomes were evaluated and compared between the two groups. Delayed gastric emptying was diagnosed by symptoms and simple abdomen X-ray with or without upper gastrointestinal series or endoscopy. Results Postoperative delayed gastric emptying was found in 12 (3.2%) of the 378 patients. Among all the variables, distal margin and circular stapler diameter were significantly different between the cases with delayed gastric emptying and no delayed gastric emptying. There were statistically significant differences in sex, body mass index, comorbidity, complication, and operation type according to circular stapler diameter. In both univariate and multivariate logistic regression analyses, only the stapler diameter was found to be a significant factor affecting delayed gastric emptying (P = 0.040). Conclusion In this study, the circular stapler diameter was one of the most significant predictable factors of delayed gastric emptying for Billroth I gastroduodenostomy. The use of a 28 or 29 mm diameter circular stapler rather than a 25 mm diameter stapler in stapled gastroduodenostomy for early gastric cancer can reduce postoperative delayed gastric emptying associated with anastomosic stenosis or edema with relative safety. PMID:23166886

A modular wireless in vivo surgical robot with multiple surgical applications.

PubMed

Hawks, Jeff A; Rentschler, Mark E; Farritor, Shane; Oleynikov, Dmitry; Platt, Stephen R

2009-01-01

The use of miniature in vivo robots that fit entirely inside the peritoneal cavity represents a novel approach to laparoscopic surgery. Previous work demonstrates that both mobile and fixed-based robots can successfully operate inside the abdominal cavity. A modular wireless mobile platform has also been developed to provide surgical vision and task assistance. This paper presents an overview of recent test results of several possible surgical applications that can be accommodated by this modular platform. Applications such as a biopsy grasper, stapler and clamp, video camera, and physiological sensors have been integrated into the wireless platform and tested in vivo in a porcine model. The modular platform facilitates rapid development and conversion from one type of surgical task assistance to another. These self-contained surgical devices are much more transportable and much lower in cost than current robotic surgical assistants. These devices could ultimately be carried and deployed by non-medical personnel at the site of an injury. A remotely located surgeon could use these robots to provide critical first response medical intervention.

Smaller-diameter circular stapler has an advantage in Billroth I stapled anastomosis after laparoscopy-assisted distal gastrectomy.

PubMed

Kim, Min-Kyoon; Park, Joong-Min; Choi, Yoo-Shin; Chi, Kyong-Choun

2012-04-01

Billroth I gastroduodenostomy using a circular stapler is the most preferred reconstruction method after laparoscopy-assisted distal gastrectomy (LADG). The optimal stapler size for this procedure has not yet been proposed. Sixty-five patients who underwent LADG and stapled anastomosis with a 25-mm stapler (25-mm group) and a 29-mm stapler (29-mm group) were enrolled in this study. Clinical data and gastroscopic findings at 6 and 12 months after surgery were retrospectively reviewed. Postoperative complications and postprandial symptoms were similar in both groups. Gastroscopically, food materials remained more frequently in the remnant stomach in the 25-mm group than in the 29-mm group at 6 months after surgery (P=.041). Gastritis and bile reflux were observed more frequently in the 29-mm group than in the 25-mm group (P=.012 and P=.015, respectively). All these differences in the gastroscopic findings between the two groups decreased at 12 months after surgery except for reflux esophagitis, which was observed more frequently in the 29-mm group (P=.002). The length of the incision was smaller in the 25-mm group than in the 29-mm group (4.39 cm versus 4.95 cm, P=.009). A small-diameter stapler is a risk factor for gastric stasis in the early postoperative period, whereas a large-diameter stapler is a risk factor for gastritis and bile reflux in the early postoperative period and for esophagitis in the late postoperative period. Thus, a small-diameter circular stapler has more advantages over a large-diameter circular stapler. It also enables a reliable anastomosis through a smaller incision and easy handling of the stapler during anastomosis.

Robotic Versus Laparoscopic Stapler Use for Rectal Transection in Robotic Surgery for Cancer.

PubMed

Atasoy, Deniz; Aytac, Erman; Ozben, Volkan; Bayraktar, Onur; Erenler Bayraktar, Ilknur; Aghayeva, Afag; Baca, Bilgi; Hamzaoglu, Ismail; Karahasanoglu, Tayfun

2018-05-01

This study was designed to compare the operative and short-term postoperative outcomes of the robotic and laparoscopic staplers in patients undergoing rectal surgery for cancer. Between December 2014 and April 2017, patients consecutively undergoing robotic rectal surgery for cancer were included in this study. Patients were grouped into two according to the type of staplers for rectal transection [Robotic (45-mm) versus Laparoscopic (60-mm) linear staplers]. Patient demographics, pathologic data, perioperative outcomes, and short-term results were compared. One hundred seven patients met our inclusion criteria. The number of male patients were higher in robotic stapler group than in the laparoscopic stapler group (55% versus 76%, P = .03). Age (59 versus 63 years, P = .40), body mass index (27 versus 27 kg/m 2 , P = .60), American Society of Anesthesiologists score (2 versus 2, P = .20), number of prior abdominal operations (31% versus 20%, P = .22) and number of patients having neoadjuvant chemoradiotherapy (34% versus 36%, P = .86) were comparable between the groups. The numbers of cartridges used were similar regardless of the type of staplers (2 versus 2, P = .58). The overall complication was similar between the groups (24% versus 31%, P = .32). Leak rates were 5% (n = 2) and 3% (n = 2) in the robotic and laparoscopic stapler groups, respectively (p = 1). There was no mortality. This is the first study evaluating the role of robotic stapler specifically for rectal transection in comparative manner. The use of robotic stapler for rectal transection was safe and feasible in rectal surgery for cancer.

Association Between Circular Stapler Diameter and Stricture Rates Following Gastrointestinal Anastomosis: Systematic Review and Meta-analysis.

PubMed

Allen, W; Wells, C I; Greenslade, M; Bissett, I P; O'Grady, G

2018-04-09

Stricture is a common complication of gastrointestinal (GI) anastomoses, associated with impaired quality of life, risk of malnutrition, and further interventions. This systematic review and meta-analysis aimed to determine the association between circular stapler diameter and anastomotic stricture rates throughout the GI tract. A systematic literature search of EMBASE, MEDLINE and Cochrane Library was performed. The primary outcome was the rate of radiologically or endoscopically confirmed anastomotic stricture. Pooled odds ratios (OR) were calculated using random-effects models to determine the effect of circular stapler diameter on stricture rates in different regions of the GI tract. Twenty-one studies were identified: seven oesophageal, twelve gastric, and three lower GI. Smaller stapler sizes were strongly associated with higher anastomotic stricture rates throughout the GI tract. The oesophageal anastomosis studies showed; 21 versus 25 mm circular stapler: OR 4.39 ([95% CI 2.12, 9.07]; P < 0.0001); 25 versus 28/29 mm circular stapler: OR 1.71 ([95% CI 1.15, 2.53]; P < 0.008). Gastric studies showed; 21 versus 25 mm circular stapler: OR 3.12 ([95% CI 2.23, 4.36]; P < 0.00001); 25 versus 28/29 mm circular stapler: OR 7.67 ([95% CI 1.86, 31.57]; P < 0.005). Few lower GI studies were identified, though a similar trend was found: 25 versus 28/29 mm circular stapler: pooled OR 2.61 ([95% CI 0.82, 8.29]; P = 0.100). The use of larger circular stapler sizes is strongly associated with reduced risk of anastomotic stricture in the upper GI tract, though data from lower GI joins are limited.

Stricture Rate after Laparoscopic Roux-en-Y Gastric Bypass with a 21-mm Circular Stapler versus a 25-mm Linear Stapler

PubMed Central

Vunnamadala, Kalyan; Sakharpe, Aniket; Wilhelm, B. Jakub; Aksade, Artun

2015-01-01

Background: Obesity is estimated to affect more than one and a half billion adults. Laparoscopic Roux-en-Y gastric bypass (LRYGB) has become one of the preferred weight loss procedures. However, complications can occur. Strictures at the gastrojejunal anastomosis lead to clinical symptoms such as vomiting, dysphagia, and patient discomfort. The stricture rate has been correlated with the size and type of stapler used. Methods: A retrospective review of the clinical records of patients who underwent LRYGB was performed between 2003 and 2010. A comparison was made between a 21-mm circular stapler technique and a 25-mm linear stapler technique. Results: The stricture rate for the 21-mm circular stapler group was 7.12% and comparable to the national average. Using the 25-mm linear stapler, this complication rate significantly decreased to 1.09% (p<0.0004; odds ratio 6.5; [95% confidence interval 1.96–33.83]). Conclusions: Stricture after LRYGB is a serious complication. This study found that with a change in technique, this complication can be decreased considerably. PMID:25830078

Common side closure type, but not stapler brand or oversewing, influences side-to-side anastomotic leak rates.

PubMed

Fleetwood, V A; Gross, K N; Alex, G C; Cortina, C S; Smolevitz, J B; Sarvepalli, S; Bakhsh, S R; Poirier, J; Myers, J A; Singer, M A; Orkin, B A

2017-03-01

Anastomotic leak (AL) increases costs and cancer recurrence. Studies show decreased AL with side-to-side stapled anastomosis (SSA), but none identify risk factors within SSAs. We hypothesized that stapler characteristics and closure technique of the common enterotomy affect AL rates. Retrospective review of bowel SSAs was performed. Data included stapler brand, staple line oversewing, and closure method (handsewn, HC; linear stapler [Barcelona technique], BT; transverse stapler, TX). Primary endpoint was AL. Statistical analysis included Fisher's test and logistic regression. 463 patients were identified, 58.5% BT, 21.2% HC, and 20.3% TX. Covidien staplers comprised 74.9%, Ethicon 18.1%. There were no differences between stapler types (Covidien 5.8%, Ethicon 6.0%). However, AL rates varied by common side closure (BT 3.7% vs. TX 10.6%, p = 0.017), remaining significant on multivariate analysis. Closure method of the common side impacts AL rates. Barcelona technique has fewer leaks than transverse stapled closure. Further prospective evaluation is recommended. Copyright © 2017. Published by Elsevier Inc.

Stricture Rate after Laparoscopic Roux-en-Y Gastric Bypass with a 21-mm Circular Stapler versus a 25-mm Linear Stapler.

PubMed

Baccaro, Leopoldo M; Vunnamadala, Kalyan; Sakharpe, Aniket; Wilhelm, B Jakub; Aksade, Artun

2015-03-01

Background: Obesity is estimated to affect more than one and a half billion adults. Laparoscopic Roux-en-Y gastric bypass (LRYGB) has become one of the preferred weight loss procedures. However, complications can occur. Strictures at the gastrojejunal anastomosis lead to clinical symptoms such as vomiting, dysphagia, and patient discomfort. The stricture rate has been correlated with the size and type of stapler used. Methods: A retrospective review of the clinical records of patients who underwent LRYGB was performed between 2003 and 2010. A comparison was made between a 21-mm circular stapler technique and a 25-mm linear stapler technique. Results: The stricture rate for the 21-mm circular stapler group was 7.12% and comparable to the national average. Using the 25-mm linear stapler, this complication rate significantly decreased to 1.09% ( p <0.0004; odds ratio 6.5; [95% confidence interval 1.96-33.83]). Conclusions: Stricture after LRYGB is a serious complication. This study found that with a change in technique, this complication can be decreased considerably.

Modified single stapler technique in anterior resection for rectal cancer.

PubMed

Akbaba, Soner; Ersoy, Pamir Eren; Gundogdu, Riza Haldun; Ulas, Murat; Menekse, Ebru

2015-01-01

Technical difficulties during colorectal surgery increase the complication rates. We introduce a modified single stapler technique for patients in whom technical problems are encountered while performing double stapler technique. Before pelvic dissection, descending colon is divided at minimum 10 cm proximal to the tumoral segment. Tumor specific mesorectal excision is performed and two purse string sutures are placed at the distal margin with an interval of 1 - 2 cm. After introducing a circular stapler via the anus, the distal purse string suture is tied around the central shaft of the stapler and the proximal purse string suture around the colonic lumen. After the resection is completed between the two sutures, the anvil shaft is connected to the central shaft and the stapler is closed and fired. None of the patients had an anastomotic leak. This technique may be a safe alternative particularly in patients with narrow pelvis and distal tumors.

Looped suture versus stapler device in pediatric laparoscopic appendectomy: a comparative outcomes and intraoperative cost analysis.

PubMed

Parikh, Punam P; Tashiro, Jun; Wagenaar, Amy E; Curbelo, Miosotys; Perez, Eduardo A; Neville, Holly L; Hogan, Anthony R; Sola, Juan E

2018-04-01

Appendiceal ligation during pediatric laparoscopic appendectomy (LA) may be performed using looped suture versus stapler. Controversy regarding the utility of either method exists. Clinical outcomes and cost analysis of LA with both methods were compared. All pediatric LA were performed from fiscal years 2013 and 2014 by two pediatric surgeons. While one surgeon used looped suture, the other used stapler exclusively. chi-Square tests were performed to analyze associations. Two hundred thirty-eight cases were analyzed where looped suture versus stapler LA was performed in 46% and 54% of patients, respectively. Operating room costs were $317.10 and $707.12/person for looped suture and stapler LA, respectively (P<0.0001). Difference in cost of $390.02/person was attributed solely to ligation type. On bivariate analysis, rate of in-hospital complications, length of stay, return-to-ER and readmission within 30 days did not significantly differ between groups. A comparative analysis of looped suture versus stapler device during LA for pediatric appendicitis revealed that postoperative complications, length of stay, ER visits and readmissions were not significantly different. Looped suture LA was significantly more cost efficient than stapler LA. In pediatric appendicitis, appendiceal ligation during LA may be performed safely and cost effectively with looped suture versus stapler. Cost effectiveness LEVEL OF EVIDENCE: III. Copyright © 2017 Elsevier Inc. All rights reserved.

Circular stapler size and risk of anastomotic complications in gastroduodenostomy for gastric cancer.

PubMed

Kim, Dae Hoon; Oh, Cheong Ah; Oh, Seung Jong; Choi, Min Gew; Noh, Jae Hyung; Sohn, Tae Sung; Bae, Jae Moon; Kim, Sung

2012-08-01

A Billroth I reconstruction with a mechanically sutured anastomosis is commonly performed in gastric cancer patients. Some surgeons prefer to use large circular staplers during suturing to minimize risks for anastomotic stricture and gastric stasis after surgery. The effect of stapler size on anastomotic complications has not been validated. This study was conducted with 1,031 patients who underwent gastrectomy and Billroth I reconstruction at Samsung Medical Center in Seoul, Korea, between January 2007 and October 2008. Patients were assigned to group A (384 patients) or group B (647 patients) depending on the size of the circular stapler that the surgeon selected for mechanical anastomosis. A 25 mm circular stapler was used for patients in group A, and a 28 or 29 mm circular stapler was used for patients in group B. Postoperative complications were analyzed retrospectively. The incidence of complications (e.g., gastric stasis, anastomotic stricture, and bleeding) did not differ significantly between groups. Age greater than 60 years was the only significant risk factor for anastomotic complications identified in univariate and multivariate analyses. Stapler size was unrelated to complications, such as stricture and gastric stasis. Age was the only significant risk factor for anastomotic complications after gastroduodenostomy.

Risk factor analysis and prevention of postoperative pancreatic fistula after distal pancreatectomy with stapler use.

PubMed

Sugimoto, Motokazu; Gotohda, Naoto; Kato, Yuichiro; Takahashi, Shinichiro; Kinoshita, Takahiro; Shibasaki, Hidehito; Nomura, Shogo; Konishi, Masaru; Kaneko, Hironori

2013-06-01

Postoperative pancreatic fistula (POPF) is a major, intractable complication after distal pancreatectomy (DP). Risk factor evaluation and prevention of this complication are important tasks for pancreatic surgeons. One hundred and six patients who underwent DP using a stapler for pancreatic division were retrospectively investigated. The relationship between clinicopathological factors and the incidence of POPF was statistically analyzed. Clinically relevant, Grade B or C POPF by International Study Group of Pancreatic Fistula criteria occurred in 52 patients (49.1 %). Age, American Society of Anesthesiologists score, body mass index, and concomitant gastrointestinal tract resection did not influence the incidence of POPF. Use of a double-row stapler and a thick pancreatic stump were significant risk factors for POPF in multivariate analysis. Compression index was also shown to be an important factor in cases in which the pancreas was divided by a stapler. The most important risk factor for POPF after DP was suggested to be the thickness of the pancreatic stump, reflecting the volume of remnant pancreas. A triple-row stapler seemed to be superior to a double-row stapler in preventing POPF. However, triple-row stapler use in a thick pancreas is considered to be a future problem to be solved.

Homeland Security Airport Security Model

DTIC Science & Technology

2006-03-22

carrying a stapler in our briefcase. After the case went through the x-ray machine, and signaled an alert, the TSA agent asked to 38 open the case. She...saw that the "offending object" was the stapler . She then removed the stapler from the case, put it in a basket, and sent the case and basket through... stapler . Thus, the process should have stopped after the case was opened. Instead of paying TSA personnel to spend time on trivial searches, the TSA

Adult male circumcision with a circular stapler versus conventional circumcision: A prospective randomized clinical trial

PubMed Central

Jin, X.D.; Lu, J.J.; Liu, W.H.; Zhou, J.; Yu, R.K.; Yu, B.; Zhang, X.J.; Shen, B.H.

2015-01-01

Male circumcision is the most frequently performed procedure by urologists. Safety and efficacy of the circumcision procedure requires continual improvement. In the present study, we investigated the safety and efficacy of a new male circumcision technique involving the use of a circular stapler. In total, 879 consecutive adult male patients were randomly divided into 2 groups: 441 underwent stapler circumcision, and 438 underwent conventional circumcision. The operative time, pain score, blood loss volume, healing time, treatment costs, and postoperative complications were compared between the two groups. The operative time and blood loss volume were significantly lower in the stapler group than in the conventional group (6.8 ± 3.1 vs 24.2 ± 3.2 min and 1.8 ± 1.8 vs 9.4 ± 1.5 mL, respectively; P<0.01 for both). The intraoperative and postoperative pain scores were significantly lower in the stapler group than in the conventional group (0.8 ± 0.5 vs 2.4 ± 0.8 and 4.0 ±0.9 vs 5.8 ± 1.0, respectively; P<0.01 for both). Additionally, the stapler group had significantly fewer complications than the conventional group (2.7% vs 7.8%, respectively; P<0.01). However, the treatment costs in the stapler group were much higher than those in the conventional group (US$356.60 ± 8.20 vs US$126.50 ± 7.00, respectively; P<0.01). Most patients (388/441, 88.0%) who underwent stapler circumcision required removal of residual staple nails. Overall, the present study has shown that stapler circumcision is a time-efficient and safe male circumcision technique, although it requires further improvement. PMID:25831203

Single-Incision Laparoscopic Anterior Resection Using a Curved Stapler.

PubMed

Watanabe, Jun; Ota, Mitsuyoshi; Suwa, Yusuke; Ishibe, Atsushi; Masui, Hidenobu; Nagahori, Kaoru

2016-11-01

Single-incision laparoscopic colectomy is technically limited because of such factors as instrument crowding, in-line viewing, and insufficient countertraction. In particular, it is technically difficult to cut the distal rectum from the umbilicus using an articulating linear stapler in single-incision laparoscopic anterior resection. After treating the mesorectum, the 5-mm trocar is replaced with a 12-mm trocar. The cartridge of the curved stapler is mounted while the shaft of the stapler is inserted into the 12-mm port extracorporeally. The curved stapler is inserted through the umbilical incision with the cartridge. A multichannel port is then mounted, and the abdominal cavity is reinsufflated. The curved stapler can then be operated intracorporeally. This procedure facilitates the vertical dissection of the rectum from the umbilicus. A total of 27 consecutive patients were analyzed in this study. All the procedures were safely performed without any complications. The median distance from the peritoneal reflection to the transection point of the distal bowel in single-incision laparoscopic anterior resection was 5.0 cm (range, -2.0 to 15.0). One stapler firing was required to achieve distal bowel division in 26 patients (96.3 %), whereas 2 firings were required in 1 patient (3.7 %). The median distal margin was 7.0 cm (range, 3.0-13.0). The time from the insertion of the stapler to transection was 180 seconds (range, 100-420). There were no cases of anastomotic leakage. In single-incision laparoscopic anterior resection, it is feasible to perform rectal transection from the umbilicus by using a curved stapler. This technique may allow for the omission of 1 trocar from the operation.

Adult male circumcision with a circular stapler versus conventional circumcision: A prospective randomized clinical trial.

PubMed

Jin, X D; Lu, J J; Liu, W H; Zhou, J; Yu, R K; Yu, B; Zhang, X J; Shen, B H

2015-06-01

Male circumcision is the most frequently performed procedure by urologists. Safety and efficacy of the circumcision procedure requires continual improvement. In the present study, we investigated the safety and efficacy of a new male circumcision technique involving the use of a circular stapler. In total, 879 consecutive adult male patients were randomly divided into 2 groups: 441 underwent stapler circumcision, and 438 underwent conventional circumcision. The operative time, pain score, blood loss volume, healing time, treatment costs, and postoperative complications were compared between the two groups. The operative time and blood loss volume were significantly lower in the stapler group than in the conventional group (6.8 ± 3.1 vs 24.2 ± 3.2 min and 1.8 ± 1.8 vs 9.4 ± 1.5 mL, respectively; P<0.01 for both). The intraoperative and postoperative pain scores were significantly lower in the stapler group than in the conventional group (0.8 ± 0.5 vs 2.4 ± 0.8 and 4.0 ±0.9 vs 5.8 ± 1.0, respectively; P<0.01 for both). Additionally, the stapler group had significantly fewer complications than the conventional group (2.7% vs 7.8%, respectively; P<0.01). However, the treatment costs in the stapler group were much higher than those in the conventional group (US$356.60 ± 8.20 vs US$126.50 ± 7.00, respectively; P<0.01). Most patients (388/441, 88.0%) who underwent stapler circumcision required removal of residual staple nails. Overall, the present study has shown that stapler circumcision is a time-efficient and safe male circumcision technique, although it requires further improvement.

Analysis of Hand Size and Ergonomics of Instruments in Pediatric Minimally Invasive Surgery.

PubMed

Filisetti, Claudia; Cho, Alexander; Riccipetitoni, Giovanna; Saxena, Amulya K

2015-10-01

Moving from the study conducted in 2004 on adult surgeons we want to analyze the ergonomics applied in pediatric minimally invasive surgery. An online survey was conducted among the members of the European Paediatric Surgeons' Association that included 14 questions pertaining to demographic, surgical glove size, double glove use, prior hand surgery, and the ease or difficulty in using different types of laparoscopic instruments. A total of 138 pediatric surgeons completed the survey. The difficulty score (DS) was similar between the 3.5- and 5-mm instruments. Other specialized instruments such as Ligasure, Ultracision, Clip applicators, endobags, and staplers were found to have higher DS. The needle holder was the only instrument that is part of the normal 5-mm operating sets, which was found to have a higher DS. Our survey found increased DS with the endobag and stapler, but this was not significant. Also prior hand surgery or double glove use was not associated with difficulty in usage of minimally invasive instruments when compared with normal hands in this survey.

[History of mechanical sutures in digestive system surgery].

PubMed

Picardi, Nicola

2002-01-01

The attempts to suture wounds with mechanical device are very old, and their history is lost in the night of times. But more recently--that means less than two century ago--already before the true initial beginning of the modern surgery, after the birth of anaesthesiology with the "ether day--16 october 1846" there have been many efforts to develop new methods to join the tissue of the gut avoiding the danger of peritoneal contamination. The primitive tools of these ancient stapler were founded on the principle to compress with mechanical devices the two sides of the tissue to join. Very early in the past century, well before the appearance of the antibiotics, in the heart of the old Europe were developed and perfectionated devices able to join the intestinal tissue with metallic stitches: the primitive staplers. But after the end of the second world war the development has become bursting, with the progress of the Sovietic Institute of experimental research on surgical tools of Moscow and then with the mighty initiatives of the industrial power in the USA. The more important progress in this field was founded on the standardization of tools designed to fix metallic stitches on the gut, but very recently there are new attempts to use the more old principle of compression-suture on new basis. The results of this development, essential for modern surgery, are the standardization of the surgical technique, the shortening of operative times, and an important support to the new mininvasive approach to digestive surgery.

An original use in low colo-rectal anastomosis of the new surgical device "grasping tie".

PubMed

Picardi, Nicola

2005-01-01

The grasping tie is an original and mechanical tool, conceived and planned to be used in digestive surgery to do the equivalent of a purse string. Its use is conceived to make easier the mechanical anastomosis in the more difficult situations as the oesophago-jejunal or the very low colo-rectal ones, as in the example of the presented paper. A thin ribbon of nylon will be progressively tightened as a one-way running knot upon the tract of the gut, either directly or about the axis of a circular stapler. Once completed the stapler suture it will be completely extracted together with the muscle-mucosal rings, so that nothing of the ribbon remains in the patient. The use of the grasping tie is also advantageous in quickly closing the gut above and below a tumour, to a safer manipulation and to reduce the contamination of the operative field. An original and useful use of the grasping tie is demonstrated in the present paper for the surgical treatment of a low rectal cancer with preservation of the anus. Its use is that to close the distal stump of the rectum below the tumour, to take away from the pelvis the proximal stump with the tumour, and then to proceed to the mechanical anastomosis in a now wide operatory field, introducing in the anus an enteral dilator and preparing on it the definitive purse string, as illustrated.

Laser versus stapler: outcomes in endoscopic repair of Zenker diverticulum.

PubMed

Adam, Stewart I; Paskhover, Boris; Sasaki, Clarence T

2012-09-01

To analyze a single surgeon's experience with endoscopic CO(2) laser and stapler repair of Zenker diverticulum (ZD) by comparing dysphagia and regurgitation outcomes. Retrospective chart review of 148 patient charts. Medical records of all patients receiving endoscopic repair of ZD with either CO(2) laser (61 patients) or stapler (67 patients) were reviewed. Additional data included demographics (age and sex), size (cm), preoperative and postoperative symptoms, need for revision, and complications. Symptoms of dysphagia were graded based on a modified Functional Oral Intake Scale 1 to 4 scale (1 = normal intake; 4 = severely limited/G-tube dependent). Regurgitation was also graded on a 1 to 4 scale (1 = no regurgitation; 4 = aspiration events). We noted no difference in patient age or defect size (laser, 3.26 cm; stapler, 3.53 cm; P .135). Significant differences were noted in return trips to the operating room for failed procedures (laser, 0; stapler, 7; P = .009), length of stay (laser, 3.19 days; stapler, 1.29 days; P < .001), time to oral intake (laser, 3.01 days; stapler, 1.22 days; P < .001). Significant improvement occurred in laser and staple patient symptom scales following surgery (P < .001). Laser dysphagia and regurgitation scores showed greater improvement when compared to stapler scores (P < .001). Endoscopic CO(2) laser and staple methods are effective in treating ZD. The laser can have greater efficacy and result in lower recurrence rates. Both methods are analyzed and compared. Copyright © 2012 The American Laryngological, Rhinological, and Otological Society, Inc.

Local repair of stoma prolapse: Case report of an in vivo application of linear stapler devices.

PubMed

Monette, Margaret M; Harney, Rodney T; Morris, Melanie S; Chu, Daniel I

2016-11-01

One of the most common late complications following stoma construction is prolapse. Although the majority of prolapse can be managed conservatively, surgical revision is required with incarceration/strangulation and in certain cases laparotomy and/or stoma reversal are not appropriate. This report will inform surgeons on safe and effective approaches to revising prolapsed stomas using local techniques. A 58 year old female with an obstructing rectal cancer previously received a diverting transverse loop colostomy. On completion of neoadjuvant treatment, re-staging found new lung metastases. She was scheduled for further chemotherapy but incarcerated a prolapsed segment of her loop colostomy. As there was no plan to resect her primary rectal tumor at the time, a local revision was preferred. Linear staplers were applied to the prolapsed stoma in step-wise fashion to locally revise the incarcerated prolapse. Post-operative recovery was satisfactory with no complications or recurrence of prolapse. We detail in step-wise fashion a technique using linear stapler devices that can be used to locally revise prolapsed stoma segments and therefore avoid a laparotomy. The procedure is technically easy to perform with satisfactory post-operative outcomes. We additionally review all previous reports of local repairs and show the evolution of local prolapse repair to the currently reported technique. This report offers surgeons an alternative, efficient and effective option for addressing the complications of stoma prolapse. While future studies are needed to assess long-term outcomes, in the short-term, our report confirms the safety and effectiveness of this local technique.

Lateral spread of heat during thyroidectomy using different haemostatic devices.

PubMed

Adamczewski, Zbigniew; Król, Aleksander; Kałużna-Markowska, Karolina; Brzeziński, Jan; Lewiński, Andrzej; Dedecjus, Marek

2015-01-01

The presented study is an attempt to comprehensively analyze the lateral spread of heat during thyroidectomy. Obtained results may be valuable in other surgical disciplines in which thermal analysis is difficult or impossible. The aim of the study was to evaluate the temperature distribution in the operating field during thyroidectomy performed with the use of modern haemostatic instruments, and to define the safety margin for the investigated devices. Ninety-three patients were thyroidectomised due to thyroid neoplasm. During all the operations the thermovisual measurements were carried out along with continuous intraoperative neuromonitoring of the recurrent laryngeal nerve (CIONM). Investigated patients were divided into 5 groups, named according to the applied haemostatic technique: LigaSure (N=17); ThermoStapler (N=20); Focus (N=19); SonoSurg (N=17) and Monopolar (N=20). At maximal performance settings, the highest working temperature was observed for the ThermoStapler, while the lowest temperature was recorded for the Monopolar. Safety margin and working time were increased in Focus and SonoSurg, compared to LigaSure and ThermoStapler. The differences in the necrosis thickness were negligible. The largest distance of the midline of the active blade from isotherm of 42ºC observed in the study was 5.51 mm; none of investigated devices used at a bigger distance had influence on the morphology of the electric signal of CIONM. The thermo-visual camera allows non-invasive, safe, and real-time monitoring and analysis of temperature distribution in the operation area during thyroidectomy. Proposed minimal safety margin for the analysed devices is 5.51 mm.

Meniscal repair using the Polysorb Meniscal Stapler XLS.

PubMed

Oberlander, Michael A; Chisar, Michael A

2005-09-01

We present our technique of repair of meniscal tears in 11 patients using a newly designed stapler, the Polysorb Meniscal Stapler XLS (USS Sports Medicine, Norwalk, CT), to increase the effectiveness and ease of repair of tears in the vascular zone while limiting potential complications. The low-profile stapler comes with a reloadable pistol grip device and a disposable straight or 15 degrees upcurved shaft with a single preloaded 10-mm staple. Standard anteromedial and anterolateral portals were used, along with a superomedial portal for inflow. The portal was enlarged slightly to facilitate introduction of the cannula or the stapler directly into the knee. The nose of the stapler was applied to the superior surface of the inner edge of the meniscal tear. The sharp points on the tip of the nose were used to manipulate the inner edge and coapt the tear site. Firm pressure was applied to the meniscal tissue, and the nose of the stapler was embedded in the inner edge of the meniscus no more than 2 to 3 mm from the tear (as measured along the meniscal surface). The handle was pulled slowly as the staple engaged the meniscal tissue. This step was repeated every 3 to 4 mm to ensure ideal tear stabilization.

Application of type synthesis theory to the redesign of a complex surgical instrument.

PubMed

Lim, Jonas J B; Erdman, Arthur G

2002-06-01

Surgical instruments consist of basic mechanical components such as gears, links, pivots, sliders, etc., which are common in mechanical design. This paper describes the application of a method in the analysis and design of complex surgical instruments such as those employed in laparoscopic surgery. This is believed to be the first application of type synthesis theory to a complex medical instrument. Type synthesis is a methodology that can be applied during the conceptual phase of mechanical design. A handle assembly from a patented laparoscopic surgical stapler is used to illustrate the application of the design method developed. Type synthesis is applied on specific subsystems of the mechanism within the handle assembly where alternative design concepts are generated. Chosen concepts are then combined to form a new conceptual design for the handle assembly. The new handle assembly is improved because it has fewer number of parts, is a simpler design and is easier to assemble. Surgical instrument designers may use the methodology presented here to analyze the mechanical subsystems within complex instruments and to create new options that may offer improvements to the original design.

Curved cutter stapler for the application of bronchial sutures in anatomic pulmonary resections: the clinical experience of 139 cases.

PubMed

Sardelli, Paolo; Barrettara, Barbara; Cisternino, Marco Luigi; Napoli, Gaetano; Lacitignola, Angelo; Quitadamo, Stefania

2012-03-01

One of the fundamental steps in an anatomical pulmonary resection is the main and lobar bronchus suture. Nowadays, two different types of staplers are on the market: the linear TA stapler for open surgery (Tyco Healthcare Group LP, Norwalk, CT, USA), which is based on a 'guillotine' mechanism, sewing, but not cutting the bronchus, and the endoscopic linear stapler which both cuts and sews. This study aimed to fill the void in the use of an instrument used to staple and cut at the same time in 'open' thoracic surgery, eliminating the need for a scalpel: the curved cutter stapler (Contour Curved Cutter Stapler; Ethicon Endo-Surgery, Inc., Cincinnati, OH, USA). Between May 2009 and March 2011, the Contour Curved Stapler (Ethicon) was used for the bronchus in 139 cases of non-small cell lung carcinoma (NSCLC)-29 females and 110 males ranging between 48 and 85 years (average 71.1)-and comprising 115 lobectomies (8 bilobectomies) and 24 pneumonectomies (8 on the right lung, 16 on the left lung). All patients underwent a bronchoscopic check-up 30 days after they were discharged: in all cases, the bronchial stump was clearly within normal limits. No cases of bronchopleural fistulas were observed in the 139 patients. On the basis of this study, the curved cutter stapler showed to be a satisfactory device for securing the bronchus during an anatomic resection (whether lobar or main), in 'open' thoracic surgery. However, even though there were no cases of fistula, we consider that our data is still too limited to be statistically significant.

Use of Gastrointestinal Anastomosis Stapler for Harvest of Gracilis Muscle and Securing It in the Face for Facial Reanimation: A Novel Technique

PubMed Central

Shridharani, Sachin M.; Stapleton, Sahael M.; Redett, Richard J.; Magarakis, Michael; Rosson, Gedge D.

2010-01-01

Background: The primary objective of this study is to report a novel technique that uses the gastrointestinal anastomosis (GIA) stapler for harvesting and securing the gracilis muscle in facial reanimation surgery. Methods: We conducted a retrospective chart review with 18 consecutive patients who underwent gracilis muscle flap transfer with or without the use of a GIA stapler. Results: Of 11 operations with the GIA stapler, one patient developed a hematoma (donor site) and another required drainage of an abscess (recipient site). Of 8 operations without the use of the stapler, one patient had total flap failure and three required drainage of an abscess (2 recipient sites and 1 donor site). These differences trended toward improvement but were not statistically different. Conclusions: The use of the GIA stapler is a fast, safe technique. Larger studies are, however, warranted to further examine this novel approach in order to test precisely what factors of increased efficiency occur, the amount of suture pull-through, and overall tension capable of being applied to the secured staple line. PMID:20396379

The influence of the different forms of appendix base closure on patient outcome in laparoscopic appendectomy: a randomized trial.

PubMed

Delibegović, Samir; Mehmedovic, Zlatan

2018-05-01

During laparoscopic appendectomy, the base of the appendix is usually secured by loop ligature or stapling device. Hem-o-lok and DS clips have been shown as alternative techniques. The aim of this study was to compare the clinical outcomes of various forms of securing the base of the appendix, in order to find the most suitable method. The study included 120 patients with acute appendicitis randomly divided into four groups with 30 patients in each. In the first group, the base of the appendix was secured using an Endoloop, in the second group using a stapling device, in the third group using Hem-o-lok, and in the fourth group using a DS clip. The primary outcome was overall morbidity following securing the base of the appendix. Secondary outcomes were time of application and operative procedure, total length of stay, and surgical outcome. No morbidity was recorded in any group. The time of application was significantly longer in the Endoloop group than in the Stapler (P < 0.0001), Hem-o-lok (P < 0.0001), and DS clips (P < 0.0001) groups. The time of application in the Stapler group was significantly shorter than in the Hem-o-lok (P < 0.0001) and the DS clips (P < 0.0001) groups. The time of the operative procedure was significantly longer in the Endoloop than in the Stapler group (P < 0.0001). The time of the operative procedure in the Stapler group was significantly shorter than in the DS clips group (P < 0.0001) but did not differ significantly from the Hem-o-lok group (P = 0.199). The time of the operative procedure in the Hem-o-lok group was significantly shorter than in the DS clips group (P = 0.044). All forms of closure of the appendix base are acceptable, but Hem-o-lok and DS clips have the best potential for further development, and will probably become the method of choice in securing the base of the appendix.

Thoracoscopic Lobectomy in Infants and Children Utilizing a 5 mm Stapling Device.

PubMed

Rothenberg, Steven

2016-12-01

Thoracoscopic lobectomy for congenital cystic lung disease has become an accepted and in many institutions the preferred technique. However, the technical challenges are many. Previous endoscopic staplers (12 mm) used commonly in adults are too large for use in infants This study evaluates the safety and efficacy of using a 5 mm stapling device to seal and divide major pulmonary structures. From July 2014 to March 2016, 26 patients of age 6 weeks to 13 months underwent thoracoscopic lobectomy for CPAM or sequestration. Weights ranged from 3.2 to 11.4 kg. There were 7 upper lobectomies, 2 middle, and 17 lower lobectomies. In each case, the 5 mm stapler (Justright Surgical; Louisville, Colorado) was the primary device for vessel and bronchial sealing and division. It is 4.8 mm in diameter with an anvil length of 25 mm and lays down four rows of staples and divides between them. A 3 mm sealing device was used for dissection and to take smaller segmental vessels as necessary. Stump lines were evaluated for bleeding or air leak in all cases. All procedures were accomplished successfully thoracoscopically. The stapler was used on the main lobar artery cases and vein in 24 cases, a large systemic sequestration vessel in 5 cases, and the bronchus in all 26. The stapler was also used to complete the minor fissure in 1 case and the major fissure in 1 case. A total of 96 staple loads were fired. Operative times ranged from 35 to 135 minutes. There was no significant bleeding of any vascular stump. In 1 case, the edge of the bronchial stump had to be reinforced, this was thought to be secondary to too much tissue being enclosed in the jaws. There were no postoperative complications. The use of a 5 mm stapling device appears to be safe and effective in thoracoscopic lobectomy in infants. It allows for safe management of major pulmonary vessels and bronchi in the confined chest of an infant through a single 5 mm port.

[Cervical mechanical anastomosis by transhiatal approach with a new circular stapler, Ehicon ECS 21].

PubMed

Gasparri, G; Casalegno, P A; Camandona, M; Moffa, F; Oliaro, A; Ferrero, V; Dei Poli, M

1996-12-01

Authors describe a new technique of mechanical cervical anastomosis using a new, particularly long, stapler, the ECS Ethicon. Mechanical anastomosis at neck level is difficult to perform with stapler now in use, so manual anastomosis is usually preferred. However the percentage of leakage is relatively high. The possibility of doing a mechanical anastomosis introducing the stapler through the pylorus is described. At the moment cases are too few to give a full evaluation of this new technique, but certainly it could be a valid alternative, safer and quicker, to manual anastomosis.

[Clinical effect of circumcision stapler in the treatment of phimosis and redundant prepuce].

PubMed

Huo, Zhong-chao; Liu, Gang; Wang, Wei; He, Da-guang; Yu, Hai; Fan, Wen-ju; Zhong, Zheng

2015-04-01

To observe the clinical effect and safety of circumcision stapler in the treatment of phimosis and redundant prepuce. We treated 120 patients with redundant prepuce or phimosis using circumcision stapler and another 60 by conventional dorsal-incision circumcision. We observed intraoperative blood loss, operation time, postoperative pain, wound healing time, cosmetic appearance of the penis, and postoperative complications and compared them between the two groups of patients. Stapler circumcision showed obvious advantages over the conventional method in intraoperative blood loss ([2. 3 ± 1. 3] vs [15.6 ± 2.9] ml), operation time ([7.1 ± 1.4] vs [22.6 ± 4.6] min), wound healing time ([12.0 ± 2.9] as [16.3 ± 3. 1] d), postoperative pain score (1. 9 ± 1. 3 vs 5. 2 ± 1. 7), incision edema, and cosmetic appearance of the penis (all P <0. 05). Besides, stapler circumcision exempted the patients from stitch-removal pain. However, the incidence rate of postoperative local ecchymosis was significantly higher in the circumcision stapler group than in the conventional circumcision group (20. 8% vs 8. 3% , P <0. 05). Circumcision stapler, with its advantages of easier manipulation, shorter operation time, better cosmetic penile appearance, less pain, and fewer complications, is superior to conventional circumcision in the treatment of phimosis and redundant prepuce.

[Pleuroperitoneal communication detected at the beginning of continuous ambulatory peritoneal dialysis; report of a case].

PubMed

Tamaki, Masafumi; Ikeda, Mayumi; Norimura, Naoko; Miura, Kazumasa; Yoshizawa, Kiyoshi

2012-02-01

A 61-year-old female was diagnosed as having end-stage renal failure developed dyspnea soon after introduction of continuous ambulatory peritoneal dialysis (CAPD). Chest X-ray showed a right-side massive pleural effusion. Pleuro peritoneal communication was suspicious, because the hydrothorax significantly improved by the stop of CAPD. We performed video-assisted thoracic surgery. Using indigo carmine containing peritoneal dialysis fluid through a CAPD catheter, we found a fistula on the diaphragm from which blue dialysis solution flowed out like a fountain. The fistula of the diaphragm was directly closed with a surgical stapler and covered using cellulose oxidized (Surgicel) and fibrin glue. She could restart CAPD on postoperative days 7, and no recurrence of hydrothorax has been detected for 10 months after surgical treatment.

Transection Speed and Impact on Perioperative Inflammatory Response - A Randomized Controlled Trial Comparing Stapler Hepatectomy and CUSA Resection.

PubMed

Schwarz, Christoph; Klaus, Daniel A; Tudor, Bianca; Fleischmann, Edith; Wekerle, Thomas; Roth, Georg; Bodingbauer, Martin; Kaczirek, Klaus

2015-01-01

Parenchymal transection represents a crucial step during liver surgery and many different techniques have been described so far. Stapler resection is supposed to be faster than CUSA resection. However, whether speed impacts on the inflammatory response in patients undergoing liver resection (LR) remains unclear. This is a randomized controlled trial including 40 patients undergoing anatomical LR. Primary endpoint was transection speed (cm2/min). Secondary endpoints included the perioperative change of pro- and anti-inflammatory cytokines, overall surgery duration, length of hospital stay, morbidity and mortality. Mean transection speed was significantly higher in patients undergoing stapler hepatectomy compared to CUSA resection (CUSA: 1 (0.4) cm2/min vs. Stapler: 10.8 (6.1) cm2/min; p<0.0001). Analyzing the impact of surgery duration on inflammatory response revealed a significant correlation between IL-6 levels measured at the end of surgery and the overall length of surgery (p<0.0001, r = 0.6188). Patients undergoing CUSA LR had significantly higher increase of interleukin-6 (IL-6) after parenchymal transection compared to patients with stapler hepatectomy in the portal and hepatic veins, respectively (p = 0.028; p = 0.044). C-reactive protein levels on the first post-operative day were significantly lower in the stapler cohort (p = 0.010). There was a trend towards a reduced overall surgery time in patients with stapler LR, especially in the subgroup of patients undergoing minor hepatectomies (p = 0.020). Liver resection using staplers is fast, safe and suggests a diminished inflammatory response probably due to a decreased parenchymal transection time. ClinicalTrials.gov NCT01785212.

Revision Zenker diverticulum: laser versus stapler outcomes following initial endoscopic failure.

PubMed

Adam, Stewart I; Paskhover, Boris; Sasaki, Clarence T

2013-04-01

We used a retrospective chart review to analyze revision endoscopic carbon dioxide (CO2) laser and staple repairs of recurrent Zenker diverticulum (ZD). The medical records of patients with recurrent ZD after primary endoscopic repair were selected. The chart data included method of repair (CO2 laser or stapler), demographics (age and sex), defect size (in centimeters), preoperative and postoperative symptoms, and complications. Patients' dysphagia was graded on a modified Functional Oral Intake Scale from 1 to 4 (1 being normal intake and 4 being severely limited intake or gastrostomy tube dependence). Regurgitation was also graded on a 1-to-4 scale (1 being no regurgitation and 4 being aspiration). A total of 148 consecutive patients with ZD were treated with endoscopic repair between 2000 and 2010. Twelve of these patients had revisions after failed primary endoscopic management procedures, all done with the stapler. Eight revision surgeries were performed by CO2 laser, and 4 by stapler repair. No difference was noted in patient age or defect size (laser, 3.06-cm defects; stapler, 2.75-cm defects). The length of hospital stay and the time to oral intake for the patients who had a revision stapler procedure were significantly greater (p values of 0.029 and 0.009) than those for the patients in the primary stapler procedure group. Better postoperative regurgitation scores were noted for patients who had a CO2 laser procedure. Secondary endoscopic repair for ZD recurrence is an effective treatment method. Better symptom outcomes were observed with secondary CO2 laser repair than with stapler revision. Patients with revision stapling had longer hospital stays and a longer time to oral intake than did patients with primary staple repairs.

Transection Speed and Impact on Perioperative Inflammatory Response – A Randomized Controlled Trial Comparing Stapler Hepatectomy and CUSA Resection

PubMed Central

Schwarz, Christoph; Klaus, Daniel A.; Tudor, Bianca; Fleischmann, Edith; Wekerle, Thomas; Roth, Georg; Bodingbauer, Martin; Kaczirek, Klaus

2015-01-01

Background Parenchymal transection represents a crucial step during liver surgery and many different techniques have been described so far. Stapler resection is supposed to be faster than CUSA resection. However, whether speed impacts on the inflammatory response in patients undergoing liver resection (LR) remains unclear. Materials and Methods This is a randomized controlled trial including 40 patients undergoing anatomical LR. Primary endpoint was transection speed (cm2/min). Secondary endpoints included the perioperative change of pro- and anti-inflammatory cytokines, overall surgery duration, length of hospital stay, morbidity and mortality. Results Mean transection speed was significantly higher in patients undergoing stapler hepatectomy compared to CUSA resection (CUSA: 1 (0.4) cm2/min vs. Stapler: 10.8 (6.1) cm2/min; p<0.0001). Analyzing the impact of surgery duration on inflammatory response revealed a significant correlation between IL-6 levels measured at the end of surgery and the overall length of surgery (p<0.0001, r = 0.6188). Patients undergoing CUSA LR had significantly higher increase of interleukin-6 (IL-6) after parenchymal transection compared to patients with stapler hepatectomy in the portal and hepatic veins, respectively (p = 0.028; p = 0.044). C-reactive protein levels on the first post-operative day were significantly lower in the stapler cohort (p = 0.010). There was a trend towards a reduced overall surgery time in patients with stapler LR, especially in the subgroup of patients undergoing minor hepatectomies (p = 0.020). Conclusions Liver resection using staplers is fast, safe and suggests a diminished inflammatory response probably due to a decreased parenchymal transection time. Trial Registration ClinicalTrials.gov NCT01785212 PMID:26452162

Liver transection using vascular stapler: a review

PubMed Central

Bruns, Helge; Weitz, Jürgen; Schmidt, Jan; Büchler, Markus W.

2008-01-01

The clinical experience using a novel technique of liver resection with vascular staplers for dissection of hepatic parenchyma, was documented most recently in a prospective manner. These data have clearly demonstrated for the first time that stapler hepatectomy is a safe and fast dissection technique in major liver surgery (e.g. hepatectomy) which is feasible in a routine clinical setting. PMID:18773103

Laparoscopic liver resection: when to use the laparoscopic stapler device

PubMed Central

Gumbs, Andrew A.; Gayet, Brice

2008-01-01

Minimally invasive hepatic resection was first described by Gagner et al. in the early 1990s and since then has become increasingly adopted by hepatobiliary and liver transplant surgeons. Several techniques exist to transect the hepatic parenchyma laparoscopically and include transection with stapler and/or energy devices, such as ultrasonic shears, radiofrequency ablation and bipolar devices. We believe that coagulative techniques allow for superior anatomic resections and ultimately permit for the performance of more complex hepatic resections. In the stapling technique, Glisson's capsule is usually incised with an energy device until the parenchyma is thinned out and multiple firings of the staplers are then used to transect the remaining parenchyma and larger bridging segmental vessels and ducts. Besides the economic constraints of using multiple stapler firings, the remaining staples have the disadvantage of hindering and even preventing additional hemostasis of the raw liver surface with monopolar and bipolar electrocautery. The laparoscopic stapler device is, however, useful for transection of the main portal branches and hepatic veins during minimally invasive major hepatic resections. Techniques to safely perform major hepatic resection with the above techniques will be described with an emphasis on when and how laparoscopic vascular staplers should be used. PMID:18773113

Reconstruction of the jejunoesophageal anastomosis with a circular mechanical stapler in total laryngopharyngectomy defects.

PubMed

Schneider, Daniel S; Gross, Neil D; Sheppard, Brett C; Wax, Mark K

2012-05-01

The aim of this study was to demonstrate the technical feasibility and potential benefits of using a circular mechanical stapler with free jejunal transfer for jejunoesophageal anastomosis in total laryngopharyngectomy reconstruction while comparing the rates of fistula and stricture. This study was a retrospective review of 12 free jejunal flaps completed with circular mechanical stapler for the jejunoesophageal anastomosis with comparison to 17 jejunal free flaps where all anastomoses were hand sewn. In all, 29 patients underwent free jejunal transfer: 12 had jejunal free flap with circular mechanical stapler for jejunoesophageal anastomosis, whereas 17 patients had hand-sewn anastomosis. Corresponding rates of fistula and stricture were 0/12 fistulas and 3/12 strictures in the stapler cohort and 2/17 fistulas with 0/17 strictures in the hand-sewn cohort. No statistically significant difference in rate of fistula was observed between each cohort, whereas a trend toward increased rate of stricture (p = .06) was observed in the stapled anastomosis cohort. Use of circular mechanical stapler appears to be a safe and effective technique at the jejunoesophageal anastomosis for total laryngopharyngeal defects with comparable fistula and stricture rates to grafts that are hand sewn. Copyright © 2011 Wiley Periodicals, Inc.

Novel Totally Laparoscopic Endolumenal Rectal Resection With Transanal Natural Orifice Specimen Extraction (NOSE) Without Rectal Stump Opening: A Modification of Our Recently Published Clean Surgical Technique in a Porcine Model.

PubMed

Kvasha, Anton; Hadary, Amram; Biswas, Seema; Szvalb, Sergio; Willenz, Udi; Waksman, Igor

2015-06-01

Our group has recently described a novel technique for clean endolumenal bowel resection, in which abdominal and transanal approaches were used. In the current study, 2 modifications of this procedure were tested for feasibility in a porcine model. A laparoscopic approach to the peritoneal cavity was employed in rectal mobilization; this was followed by a transanal rectorectal intussusception and pull-through (IPT). IPT was established in a stepwise fashion. First, the proximal margin of resection was attached to the shaft of the anvil of an end-to-end circular stapler with a ligature around the rectum. Second, this complex was pulled transanally to produce IPT. Once IPT was established, a second ligature was placed around the rectum approximating the proximal and distal resection margins. This was followed by a purse string suture through 2 bowel walls, encircling the shaft of the anvil just proximal to the ligatures. The specimen was resected and extracted by making a full-thickness incision through the 2 bowel walls distal to the previously placed purse string suture and ligatures. The anastomosis was achieved by applying the stapler. The technique was found to be feasible. Peritoneal samples, collected after transanal specimen extraction, did not demonstrate bacterial growth. Although, this is a novel and evolving procedure, its minimally invasive nature, as well as aseptic bowel manipulation during endolumenal rectal resection, has the potential to limit the complications associated with abdominal wall incision and surgical site infection. © The Author(s) 2014.

Pancreatic thickness as a predictive factor for postoperative pancreatic fistula after distal pancreatectomy using an endopath stapler.

PubMed

Okano, Keiichi; Oshima, Minoru; Kakinoki, Keitaro; Yamamoto, Naoki; Akamoto, Shintaro; Yachida, Shinichi; Hagiike, Masanobu; Kamada, Hideki; Masaki, Tsutomu; Suzuki, Yasuyuki

2013-02-01

No consistent risk factor has yet been established for the development of pancreatic fistula (PF) after distal pancreatectomy (DP) with a stapler. A total of 31 consecutive patients underwent DP with an endopath stapler between June 2006 and December 2010 using a slow parenchymal flattening technique. The risk factors for PF after DP with an endopath stapler were identified based on univariate and multivariate analyses. Clinical PF developed in 7 of 31 (22 %) patients who underwent DP with a stapler. The pancreata were significantly thicker at the transection line in patients with PF (19.4 ± 1.47 mm) in comparison to patients without PF (12.6 ± 0.79 mm; p = 0.0003). A 16-mm cut-off for pancreatic thickness was established based on the receiver operating characteristic (ROC) curve; the area under the ROC curve was 0.875 (p = 0.0215). Pancreatic thickness (p = 0.0006) and blood transfusion (p = 0.028) were associated with postoperative PF in a univariate analysis. Pancreatic thickness was the only significant independent factor (odds ratio 9.99; p = 0.036) according to a multivariate analysis with a specificity of 72 %, and a sensitivity of 85 %. Pancreatic thickness is a significant independent risk factor for PF development after DP with an endopath stapler. The stapler technique is thus considered to be an appropriate modality in patients with a pancreatic thicknesses of <16 mm.

Technological innovation in video-assisted thoracic surgery.

PubMed

Özyurtkan, Mehmet Oğuzhan; Kaba, Erkan; Toker, Alper

2017-01-01

The popularity of video-assisted thoracic surgery (VATS) which increased worldwide due to the recent innovations in thoracic surgical technics, equipment, electronic devices that carry light and vision and high definition monitors. Uniportal VATS (UVATS) is disseminated widely, creating a drive to develop new techniques and instruments, including new graspers and special staplers with more angulation capacities. During the history of VATS, the classical 10 mm 0° or 30° rigid rod lens system, has been replaced by new thoracoscopes providing a variable angle technology and allowing 0° and 120° range of vision. Besides, the tip of these novel thoracoscopes can be positioned away from the operating side minimize fencing with other thoracoscopic instruments. The curved-tip stapler technology, and better designed endostaplers helped better dissection, precision of control, more secure staple lines. UVATS also contributed to the development of embryonic natural orifice transluminal endoscopic surgery. Three-dimensional VATS systems facilitated faster and more accurate grasping, suturing, and dissection of the tissues by restoring natural 3D vision and the perception of depth. Another innovation in VATS is the energy-based coagulative and tissue fusion technology which may be an alternative to endostaplers.

Reprographics Career Ladder AFSC 703X0.

DTIC Science & Technology

1981-07-01

LINEUP AND REGISTER TABLES 39 BINDING MACHINES 36 FLOURESCENT LAMPS 36 WET PROCESS PLATEMAKERS 36 ELECTRIC STAPLERS 32 MANUAL PAPER CUTTERS 32...ELECTROSTATIC COPIERS/PLATEMAKERS 78% PAPER CUTTERS 57% ELECTRIC STAPLERS 47% BINDING MACHINES 42% SINGLE HEAD DRILLS 37% PADDING RACKS 31% PLATEMAKING...HEAD DRILLS 78% MANUAL PAPER CUTTERS 71% STATION COLLATORS 51% BINDING MACHiNES 46% ELECTRIC STAPLERS 46% PLATEMAKING CAMERAS 44% SADDLE STITCHERS 42

Comparison of anastomotic leakage and stricture formation following layered and stapler oesophagogastric anastomosis for cancer: a prospective randomized controlled trial.

PubMed

Zhang, Y S; Gao, B R; Wang, H J; Su, Y F; Yang, Y Z; Zhang, J H; Wang, C

2010-01-01

The objective of this prospective, randomized, controlled trial, conducted from May 2002 to December 2007, was to compare post-operative anastomotic leakage and stricture formation following layered manual versus stapler oesophagogastric anastomosis in patients who underwent resection of oesophageal or gastric cardia carcinoma. Patients (n = 516) were randomized to receive either layered manual or circular stapled oesophagogastric anastomosis. Mean follow-up time was > 12 months. Anastomotic leakage occurred in one (0.4%) patient in the layered group and six (2.2%) in the stapler group; no statistically significant between-group difference. After operation, two (0.8%) patients in the layered group and 13 (5.0%) in the stapler group developed a benign oesophageal stricture; the difference between the groups was statistically significant. Compared with stapler anastomosis, layered manual anastomosis may significantly reduce the incidence of anastomotic strictures. This method is easy to apply and could be used as an alternative procedure for oesophagogastric anastomosis after resection for oesophageal or cardia carcinoma.

Stapled or manual suturing in esophagojejunostomy after total gastrectomy: a comparison of outcome in 379 patients.

PubMed

Fujimoto, S; Takahashi, M; Endoh, F; Takai, M; Kobayashi, K; Kiuchi, S; Konno, C; Obata, G; Okui, K

1991-09-01

From January 1983 to December 1989, we performed esophagojejunostomy on 379 patients who underwent total gastrectomy for gastric cancer. A mechanical EEA stapler or conventional manual suturing was used. The clinical outcomes of 199 patients in whom stapling was used (stapler group) and 180 patients in whom manual suturing was done (manual group) were compared. Two of the 199 patients in the stapler group and 3 of the 180 patients in the manual group died of causes directly related to the anastomosis. In the stapler group, 16 stapled anastomoses were formed supradiaphragmatically, and manual suturing was done for 6 patients. The highly placed anastomosis was formed without left thoracotomy or with median sternotomy in 8 of the 16 patients in whom the stapling device was used and in 1 of the 6 patients in whom manual suturing was used. The incidence of anastomotic leakage and stenosis did not differ between the groups. Thus, the mechanical stapler facilitated the construction of a rapid, reliable esophagojejunostomic anastomosis.

A new improved technique for placement of a pursestring suture on the edge of the distal part of the rectal stump using a skin stapler for low anterior resection.

PubMed

Kumashiro, R; Sano, C; Ugaeri, H; Madokoro, S; Maekawa, T; Kumamoto, M; Hideshima, T; Inutsuka, S

1994-04-01

Instead of a linear stapler or manual pursestring suture onto the lower part of the rectum, we placed a No. 2-0 Prolene suture on the edge of the rectal stump, using 12 to 16 clips and a disposable skin stapler. This technique is satisfactory for very low anterior resection.

"Small is beautiful" A series of ileo-anal anastomoses performed with the 25 - mm circular stapler.

PubMed

Resegotti, Andrea; Silvestri, Stefano; Astegiano, Marco; Deiro, Giacomo; Ribaldone, Davide; Cassine, Davide; Franchello, Alessandro

2016-01-01

With the idea that a small diameter stapler should cause less sphincter trauma, we began to use the 25mm circular stapler to perform ileo-pouch-anal anastomosis (IPAA) and we report our experience. A retrospective study using a bowel function questionnaire and a quality of life questionnaire has been conducted on a group of patients who underwent IPAA using a 25mm stapler We performed IPAA using a 25mm circular stapler in 37 patients. Postoperative mortality was nil and morbidity was 27%. One anastomotic stenosis occurred. Long term follow-up information was available on 28 patients. Mean follow-up was 70 months (range 8-177). Mean number of bowel movements was 4.5 (range 2-10, median 4.5) during the day and 0.9 (range 0-10, median 0) at night. Out of 28 patients, 19 (68%) were fully continent and 32% had occasional soiling, no one reported incontinence. All patients except one were able to withold their stool for more than 15 minutes. Daytime pad use was: never 86%, occasionally 3%, frequently 11%; nightime pas use was never 86%, occasionally 7% and frequently 7%. Bowel regulating drugs use was never 82%, occasionally 14%, regularly 4%. Evacuation difficulties were: never 75%, occasionally 21%, frequently 4%. Our results compare favourably with the literature, which reports median bowel frequency 6-7.6/24h, 9.4- 33% urgency, 17-44% daytime soiling and 32-61% nighttime soiling. Our results must be considered preliminary but we found the 25-mm stapler safe and adequate to perform IPAA. IPAA, Ulcerative Colitis, Stapler, Function.

More stapler firings increase the risk of perioperative morbidity after laparoscopic sleeve gastrectomy.

PubMed

Major, Piotr; Wysocki, Michał; Pędziwiatr, Michał; Pisarska, Magdalena; Małczak, Piotr; Wierdak, Mateusz; Dembiński, Marcin; Migaczewski, Marcin; Rubinkiewicz, Mateusz; Budzyński, Andrzej

2018-03-01

Staple-line bleeding and leakage are the most common serious complications of laparoscopic sleeve gastrectomy. The relationship between multiple stapler firings and higher risk of postoperative complications is well defined in colorectal surgery but has not been addressed in bariatric procedures so far. Identification of new factors such as "the numbers of stapler firings used during laparoscopic sleeve gastrectomy (LSG)" as a predictor for complications can lead to optimization of the patient care at bariatric centers. To determine the association between perioperative morbidity and the number of stapler firings during laparoscopic sleeve gastrectomy. This observational study was based on retrospective analysis of prospectively collected data in patients operated on for morbid obesity in a teaching hospital/tertiary referral center for general surgery. The patients who underwent LSG were analyzed in terms of the number of stapler firings used as a new potential risk predictor for postoperative complications after surgery, adjusting for other patient- and treatment-related factors. The study included 333 patients (209 women, 124 men, mean age: 40 ±11). During the first 30 days after surgery, complications were observed in 18 (5.41%) patients. Multivariate analysis showed that prolonging operative time increased morbidity (every minute, OR = 1.01; 95% CI: 1.00-1.02) and the complication rate increased with the number of stapler firings (every firing, OR = 1.91; 95% CI: 1.09-3.33; p = 0.023). Additional stapler firings above the usual number and a prolonged operation should alert a surgeon and the whole team about increased risk of postoperative complications.

Safety and short-term effectiveness of EEA stapler vs PPH stapler in the treatment of degree III haemorrhoids: prospective randomized controlled trial.

PubMed

Giuratrabocchetta, S; Pecorella, G; Stazi, A; Tegon, G; De Fazio, M; Altomare, D F

2013-03-01

Stapled haemorrhoidopexy has gained wide acceptance due to less postoperative pain although postoperative bleeding and prolapse recurrence are among the major drawbacks of this technique compared with the standard Milligan-Morgan hemorrhoidectomy. The aim was to investigate a new stapler device designed to overcome these side effects. In all, 135 patients (71 men, mean age 42 years) with degree III haemorrhoids were randomly allotted to stapled haemorrhoidopexy with PPH® staplers (Ethicon EndoSurgery) (63 patients) or with an EEA® stapler (Covidien) (72 patients) in four referral colorectal centres. The number of haemostatic overstitches apposed on the stapled suture, the area of the resected mucosa (in square centimetres) and any postoperative bleeding within 30 days were recorded. The mean area of the resected mucosa was significantly wider in EEA than PPH patients (35.75 ± 17.51 vs 28.05 ± 10.23 cm(2), P = 0.002). The median number of haemostatic stitches apposed in the EEA group was significantly lower than in the PPH groups (median value 1, vs 3, interquartile range 0-2, vs 2-5, P < 0.0001). Intraoperative haemostasis was better in the EEA group compared with the PPH01 and PPH03 groups. Postoperative bleeding occurred only in two PPH patients. Data suggest that the EEA stapler has better haemostatic properties than the PPH stapler and allows resection of a larger area of mucosal prolapse with potential benefits over the recurrence rate of haemorrhoid prolapse. © 2012 The Authors. Colorectal Disease © 2012 The Association of Coloproctology of Great Britain and Ireland.

Linear stapler closure of the pharynx during total laryngectomy: a 15-year experience (from closed technique to semi-closed technique)

PubMed Central

Altissimi, G; Frenguelli, A

2007-01-01

Summary Personal experience in performing linear stapler closure of the pharynx during 70 total laryngectomies is reported. Laryngeal staplers (55 and 60 cm) with an angled handle were used, permitting vertical closure with 19 or 20 metal staples in a double row. A closed technique was initially used, but, over the years, this has gradually been replaced by the semi-closed technique to avoid trapping the suprahyoid part of the epiglottis between the jaws of the stapler. The stapler is inserted below the larynx after having separated it from all muscular and neurovascular connections, and after performing a mini-pharyngotomy at the vallecula epiglottica in order to extract the epiglottis, evert it ventrally and suture it to the hyothyroepiglottic space. The jaws of the stapler are closed and the staples are fired while the flaps of the mini-pharyngotomy are raised above the jaws. The scalpel is inserted above the stapler to remove the larynx. When the stapler is opened, the vertical linear suture of the pharynx is evident and can be examined. This procedure takes only a few minutes to perform. It guarantees a long-term stable watertight closure, dramatically reduces contamination of the operating field by pharyngeal secretions, and permits rapid healing time, greatly lowering patient management costs. In the cases presented here, there was a 1.8% rate of pharyngocutaneous fistulae in patients who were not radiated, whereas the rate was 13.1% in pre-radiated patients. In agreement with the international literature, this procedure does not increase the rate of fistulae and, in fact, it seems to reduce it. Moreover, it is particularly indicated for pre-radiated patients. Nevertheless, the Authors recommend reserving this type of procedure to cases in which, based on meticulous pre-operative assessment by means of endoscopy and imaging, the endolaryngeal site of the tumour has been assessed and there is no need for peri-operative exploration of the pharynx or tongue base. PMID:17883187

Prototyping for surgical and prosthetic treatment.

PubMed

Goiato, Marcelo Coelho; Santos, Murillo Rezende; Pesqueira, Aldiéris Alves; Moreno, Amália; dos Santos, Daniela Micheline; Haddad, Marcela Filié

2011-05-01

Techniques of rapid prototyping were introduced in the 1980s in the field of engineering for the fabrication of a solid model based on a computed file. After its introduction in the biomedical field, several applications were raised for the fabrication of models to ease surgical planning and simulation in implantology, neurosurgery, and orthopedics, as well as for the fabrication of maxillofacial prostheses. Hence, the literature has described the evolution of rapid prototyping technique in health care, which allowed easier technique, improved surgical results, and fabrication of maxillofacial prostheses. Accordingly, a literature review on MEDLINE (PubMed) database was conducted using the keywords rapid prototyping, surgical planning, and maxillofacial prostheses and based on articles published from 1981 to 2010. After reading the titles and abstracts of the articles, 50 studies were selected owing to their correlations with the aim of the current study. Several studies show that the prototypes have been used in different dental-medical areas such as maxillofacial and craniofacial surgery; implantology; neurosurgery; orthopedics; scaffolds of ceramic, polymeric, and metallic materials; and fabrication of personalized maxillofacial prostheses. Therefore, prototyping has been an indispensable tool in several studies and helpful for surgical planning and fabrication of prostheses and implants.

[Recent advances of anastomosis techniques of esophagojejunostomy after laparoscopic totally gastrectomy in gastric tumor].

PubMed

Li, Xi; Ke, Chongwei

2015-05-01

The esophageal jejunum anastomosis of the digestive tract reconstruction techniques in laparoscopic total gastrectomy includes two categories: circular stapler anastomosis techniques and linear stapler anastomosis techniques. Circular stapler anastomosis techniques include manual anastomosis method, purse string instrument method, Hiki improved special anvil anastomosis technique, the transorally inserted anvil(OrVil(TM)) and reverse puncture device technique. Linear stapler anastomosis techniques include side to side anastomosis technique and Overlap side to side anastomosis technique. Esophageal jejunum anastomosis technique has a wide selection of different technologies with different strengths and the corresponding limitations. This article will introduce research progress of laparoscopic total gastrectomy esophagus jejunum anastomosis from both sides of the development of anastomosis technology and the selection of anastomosis technology.

“In vitro” Implantation Technique Based on 3D Printed Prosthetic Prototypes

NASA Astrophysics Data System (ADS)

Tarnita, D.; Boborelu, C.; Geonea, I.; Malciu, R.; Grigorie, L.; Tarnita, D. N.

2018-06-01

In this paper, Rapid Prototyping ZCorp 310 system, based on high-performance composite powder and on resin-high strength infiltration system and three-dimensional printing as a manufacturing method are used to obtain physical prototypes of orthopaedic implants and prototypes of complex functional prosthetic systems directly from the 3D CAD data. These prototypes are useful for in vitro experimental tests and measurements to optimize and obtain final physical prototypes. Using a new elbow prosthesis model prototype obtained by 3D printing, the surgical technique of implantation is established. Surgical implantation was performed on male corpse elbow joint.

Randomized clinical trial of stapler versus clamp-crushing transection in elective liver resection.

PubMed

Rahbari, N N; Elbers, H; Koch, M; Vogler, P; Striebel, F; Bruckner, T; Mehrabi, A; Schemmer, P; Büchler, M W; Weitz, J

2014-02-01

Various devices have been developed to facilitate liver transection and reduce blood loss in liver resections. None of these has proven superiority compared with the classical clamp-crushing technique. This randomized clinical trial compared the effectiveness and safety of stapler transection with that of clamp-crushing during open liver resection. Patients admitted for elective open liver resection between January 2010 and October 2011 were assigned randomly to stapler transection or the clamp-crushing technique. The primary endpoint was the total amount of intraoperative blood loss. Secondary endpoints included transection time, duration of operation, complication rates and resection margins. A total of 130 patients were enrolled, 65 to clamp-crushing and 65 to stapler transection. There was no difference between groups in total intraoperative blood loss: median (i.q.r.) 1050 (525-1650) versus 925 (450-1425) ml respectively (P = 0·279). The difference in total intraoperative blood loss normalized to the transection surface area was not statistically significant (P = 0·092). Blood loss during parenchymal transection was significantly lower in the stapler transection group (P = 0·002), as were the parenchymal transection time (mean(s.d.) 30(21) versus 9(7) min for clamp-crushing and stapler transection groups respectively; P < 0·001) and total duration of operation (mean(s.d.) 221(86) versus 190(85) min; P = 0·047). There were no significant differences in postoperative morbidity (P = 0·863) or mortality (P = 0·684) between groups. Stapler transection is a safe technique but does not reduce intraoperative blood loss in elective liver resection compared with the clamp-crushing technique. NCT01049607 (http://www.clinicaltrials.gov). © 2014 BJS Society Ltd. Published by John Wiley & Sons Ltd.

More stapler firings increase the risk of perioperative morbidity after laparoscopic sleeve gastrectomy

PubMed Central

Major, Piotr; Pędziwiatr, Michał; Pisarska, Magdalena; Małczak, Piotr; Wierdak, Mateusz; Dembiński, Marcin; Migaczewski, Marcin; Rubinkiewicz, Mateusz; Budzyński, Andrzej

2017-01-01

Introduction Staple-line bleeding and leakage are the most common serious complications of laparoscopic sleeve gastrectomy. The relationship between multiple stapler firings and higher risk of postoperative complications is well defined in colorectal surgery but has not been addressed in bariatric procedures so far. Identification of new factors such as “the numbers of stapler firings used during laparoscopic sleeve gastrectomy (LSG)” as a predictor for complications can lead to optimization of the patient care at bariatric centers. Aim To determine the association between perioperative morbidity and the number of stapler firings during laparoscopic sleeve gastrectomy. Material and methods This observational study was based on retrospective analysis of prospectively collected data in patients operated on for morbid obesity in a teaching hospital/tertiary referral center for general surgery. The patients who underwent LSG were analyzed in terms of the number of stapler firings used as a new potential risk predictor for postoperative complications after surgery, adjusting for other patient- and treatment-related factors. The study included 333 patients (209 women, 124 men, mean age: 40 ±11). Results During the first 30 days after surgery, complications were observed in 18 (5.41%) patients. Multivariate analysis showed that prolonging operative time increased morbidity (every minute, OR = 1.01; 95% CI: 1.00–1.02) and the complication rate increased with the number of stapler firings (every firing, OR = 1.91; 95% CI: 1.09–3.33; p = 0.023). Conclusions Additional stapler firings above the usual number and a prolonged operation should alert a surgeon and the whole team about increased risk of postoperative complications. PMID:29643964

[Proctocolectomy with J pouch. Ileo-anal anastomosis performed with PPH stapler. Our experiences after 88 cases].

PubMed

Berki, Csaba; Mohos, Elemér; Réti, György; Kovács, Tamás; Jánó, Zoltán; Mohay, József; Horváth, Sándor; Bognár, Gábor; Bene, Krisztina; Horzov, Myroslav; Sándor, Gábor; Tornai, Gábor; Mohos, Petra; Szenkovits, Péter; Nagy, Tibor; Orbán, Csaba; Herpai, Vivien; Nagy, Attila

2016-12-01

Ulcerative colitis (CU) or Familiar Polyposis (FAP) can be the indication for proctocolectomy reconstructed with J pouch. The complete removal of the colon mucosa is essential regarding the late complications and at the same time the atraumatic surgical technique is very important concerning on the long term functional results. Both aspects seems to be answered by the stapled ileo-anal anastomosis using a "procedure for prolaps and haemorrhoids (PPH)" stapler applied by us since 2000. 117 proctocolectomies reconstructed with J pouch and ileo-anal anastomosis were performed in our department between March 1990 and September 2016 indicated by CU or by FAP. In the first time period the ileo-anal anastomosis was sutured by hand (29 cases) and since 2000 the PPH stapler was applied as a routine (88 patients). Deviating ileostomy was performed in most cases of us. The data of the 117 patients were collected from the database of our hospital, 45 of them were interviewed personally and another 31 patients were contacted by phone, so 76 patients (65%) were eligible for follow-up. Frequency of stool, use of loperamid, level of incontinence (Wexner score) and perianal dermatitis were detected. The mean follow-up time was 18.6 years in the hand-sewn anastomosis group and 7.6 years in the PPH group. In the hand-sewn anastomosis group in 4/29 cases (13.8%) the removal of the pouch with definite ileostomy were necessary (2 pouchitis, 1 pouch necrosis, 1 recidiv rectum cancer); the mean stool frequency was 4.3 per day; the Wexner incontinence score was 8.5 and 2/15 patients (13.3%) live with ileostomy caused by incontinence. In the PPH stapled ileo-anal anastomosis group in 4/88 cases (4.5%) were the pouch removed (caused by pouchitis), the mean stool frequency was 4.0 per day; the Wexner score was 7.6 and 4/61 patients (6.6%) live with ileostomy caused by incontinence. Based on our experience the ileo-anal anastomosis performed by PPH stapler is technically feasible, seems to be effective concerning on the complete removal of the rectal mucosa and we observed better functional results compared with the hand-sewn anastomosis. Our data should be confirmed because of the low patients' volume.

[Trans-suture mechanical colorectal anastomosis using a double stapler in the anterior resection of the rectum. Technical note].

PubMed

Saviano, M S; Ricchi, E

1990-04-30

The spread of mechanical staplers now makes it possible to perform anastomoses in anterior resections of the rectum that are easier and safer than manual ones. Certain related problems are well known, particularly in patients with narrow pelvis and, in low anastomoses, the fashioning of the tobacco pouch on the distal rectal stump. The technique of transutural mechanical colorectal anastomosis with circular stapler after closure of the rectal stump with linear stapler is described in detail. Advantages of the technique are: anastomoses that are technically easier and safer because making of the tobacco pouch on the distal rectal stump is avoided; pollution of the operating field is reduced to the minimum; there are no problems related to differences in lumen of the colorectal stumps.

[Stapler reconstruction after total gastrectomy contrasted with manual anastomosis].

PubMed

Gullà, P; Serafini, S; Micheletti, M; Gullà, N; Tristaino, B

1989-09-15

A personal series (1985-1987) of 22 cases of total gastrectomy for cancer is analysed, a comparison being made between 11 cases treated with manual anastomosis and 11 reconstructed using a stapler. The advantages and disadvantages of the various techniques are examined and although no substantial difference is noted between the two reconstructive modalities, at least as regards morbidity and mortality, stress is laid on the unquestionable advantages of mechanical staplers. These are essentially speed of execution, suture perfection and excellent long-term results.

Time-Scale Modification of Complex Acoustic Signals in Noise

DTIC Science & Technology

1994-02-04

of a response from a closing stapler . 15 6 Short-time processing of long waveforms. 16 7 Time-scale expansion (x 2) of sequence of transients using...filter bank/overlap- add. 17 8 Time-scale expansion (x2) of a closing stapler using filter bank/overlap-add. 18 9 Composite subband time-scale...INTRODUCTION Short-duration complex sounds, as from the closing of a stapler or the tapping of a drum stick, often consist of a series of brief

[Simulated used of the "grasping tie" as in esophago-jejunostomy after total gastrectomy].

PubMed

Picardi, Nicola

2003-01-01

Simulated test of effectiveness of the original tool grasping tie--technically already illustrated in a former paper listed in bibliography--for fixing a spongy rubber tube simulating an oesophagus on a circular stapler head axis, by tightening over it a nylon ribbon slip-knot (the tie). After connecting the head to the stapler anvil through an other spongy rubber tube simulating a jejunal loop, and the firing of the stapler, it is demonstrated the correct circular anastomosis achievable.

[Creation of a colostomy using a circular mechanical stapler].

PubMed

Ruscalla, L; Delemont, M; Ligresti, C; Farinella, M; Rossi, R

1991-09-15

The paper describes the method used to create a preternatural anus in terminal stomas using a mechanical circular stapler (Model EEA-31). Two methods are put forward: Chung's and Burke's methods (the latter of which was used by our department). A mechanical circular stapler has been used several times (13) to perform this type of stoma, with excellent esthetic and functional results, both immediate and long-term. It was only necessary to reoperate in one case in order to suspend the affected colic loop.

Research on seamless development of surgical instruments based on biological mechanisms using CAD and 3D printer.

PubMed

Yamamoto, Ikuo; Ota, Ren; Zhu, Rui; Lawn, Murray; Ishimatsu, Takakazu; Nagayasu, Takeshi; Yamasaki, Naoya; Takagi, Katsunori; Koji, Takehiko

2015-01-01

In the area of manufacturing surgical instruments, the ability to rapidly design, prototype and test surgical instruments is critical. This paper provides a simple case study of the rapid development of two bio-mechanism based surgical instruments which are ergonomic, aesthetic and were successfully designed, prototyped and conceptually tested in a very short period of time.

[Epithelioid leiomyosarcoma of the stomach. Clinical experiences with a rare stomach tumor].

PubMed

Hauser, H; Steindorfer, P; Mischinger, H J; Thalhammer, M; Kronberger, L; Rosanelli, G; Lax, S F

1995-01-01

Gastric epithelioid leiomyosarcoma (epLMS), which generally occurs in mid- or late adult life, is a rare smooth muscle tumor of the stomach. Out of 25 soft tissue tumors of the stomach operated at the Department of Surgery, University of Graz, two epLMS were diagnosed. This paper presents the case of a 67-year-old male with an epLMS in the corpus and of a 80-year-old female with an epLMS in the fundus of the stomach. The tumors were not diagnosed by gastroscopy; they were localized by sonography and CT-scan. In both cases the tumor was completely removed surgically, using a TA 90 4.8 mm respectively a TA 55 4.8 mm stapler. Diagnosis was reached by histological and immunohistochemical examination of the tumor tissue. Surgical excision with wide tumor-free resection margins is the therapy of choice in this tumor group.

Combined use of rapid-prototyping model and surgical guide in correction of mandibular asymmetry malformation patients with normal occlusal relationship.

PubMed

Xu, Haisong; Zhang, Ce; Shim, Yoong Hoon; Li, Hongliang; Cao, Dejun

2015-03-01

The aim of this study is to discuss the application of rapid-prototyping model and surgical guide in the treatment of mandibular asymmetry malformation with normal occlusal relationship. Twenty-four mandibular asymmetry malformation patients with relatively normal occlusal relationship were included in this study. Surgical 3-dimensional rapid-prototyping mandibular models were made for all patients from the computed tomography (CT) DICOM data. The presurgical plan was designed on the model, and the surgical guiders for the osteotomy lines were manufactured. Genioplasty and/or mandibular osteotomy based on the presurgical plan were performed on these patients with the combined use of the rapid-prototyping model and surgical guides. All patients underwent postoperative CT scan and had at least 3-month follow-up. All patients were satisfied with the final results. According to the postoperative CT images and 3-month follow-up, all patients' mandibular asymmetry malformation was significantly improved, and the operation time was distinctly shortened relative to the conventional method. Rapid-prototyping model and surgical guide are viable auxiliary devices for the treatment of mandibular asymmetry malformation with relatively normal occlusal relationship. Combined use of them can make precise preoperative design, improve effects of operation, and shorten operating time.

Initial experience with a new articulating energy device for laparoscopic liver resection.

PubMed

Berber, Eren; Akyuz, Muhammet; Aucejo, Federico; Aliyev, Shamil; Aksoy, Erol; Birsen, Onur; Taskin, Eren

2014-03-01

Although significant advances have been made in laparoscopic liver resection (LLR), most techniques still rely on multiple energy devices and staplers, which increase operative costs. The aim of this study was to report the initial results of a new multifunctional energy device for hepatic parenchymal transection. Fourteen patients who underwent LLR using this new device were compared to 20 patients who had LLR using current laparoscopic techniques (CL). Data were collected prospectively. The groups were similar demographics and tumor type and size. Although the type of resection was similar between the groups, the parenchymal transection time was less in the Caiman group (32 ± 5 vs. 63 ± 4 min, respectively, p = 0.0001). The operative time was similar (194 ± 21 vs. 233 ± 16 min, respectively, p = 0.158). There was reduction of the number of advanced instrumentation used in the Caiman group, including the staplers. Estimated blood loss, size of surgical margin, and hospital stay were similar. There was no mortality, and morbidity was 7 % in the Caiman and 20 % in the CL group. This initial study shows that the new device is safe and efficient for LLR. Its main advantage is shortening of hepatic parenchymal transection time. This has implications for increasing efficiency and cost saving in LLR.

Subtotal pancreatectomy for cancer: closure of the pancreatic remnant with staplers.

PubMed

Ahrén, B; Tranberg, K G; Andrén-Sandberg, A; Bengmark, S

1990-03-01

This paper presents a 2-year series of 26 consecutive pancreatectomies for periampullary cancer where the pancreatic tail was closed with a stapler in order to avoid complications related to a pancreatico-digestive anastomosis. The follow-up period was 14 months or more. Seven patients developed operative complications. Pancreatic fistulas developed in 3 patients. The fistulas closed spontaneously in 2 of the patients after 2-4 months. Intraabdominal abscesses developed in 4 patients and required surgical drainage. In 1 of these patients, the abscess eroded a large vessel with a fatal outcome resulting in an operative mortality rate of 3.8%. A transient postoperative gastric stasis was observed in seven patients. Postoperative hospital median stay was 27 days (range 10-83 days). Eighteen patients have died after 4-30 months in recurrent disease and seven patients are alive after a follow-up period of 15-29 months. Pancreatic endocrine function seemed well preserved; diabetes mellitus has developed in only one patient. In conclusion, it appears that subtotal pancreatectomy with closure of the pancreatic remnant with staples gives a low morbidity and mortality. Although the conclusion should be tempered by the small number of patients, the results justify continued evaluation of this technique with long-term follow-up.

Comparison of manual and mechanical cervical esophagogastric anastomosis after esophageal resection for squamous cell carcinoma: a prospective randomized controlled trial.

PubMed

Hsu, Hsao-Hsun; Chen, Jin-Shing; Huang, Pei-Ming; Lee, Jang-Ming; Lee, Yung-Chie

2004-06-01

The use of a circular stapler in cervical esophagogastric anastomosis remains controversial. This study was to compare the postoperative and long-term results of manual and mechanical techniques for cervical esophagogastric anastomosis after resection for squamous cell carcinoma. A prospective randomized controlled trial was undertaken in 63 patients with curatively resectable squamous cell cancer of the thoracic esophagus between 1996 and 1999. Patients were randomized to receive either a hand-sewn (32 patients) or circular stapled (31 patients) cervical esophagogastric anastomosis. The mean operating time was longer when the hand-sewn method was used (524 vs. 447 min, P < 0.001). Anastomotic leakage was noted in seven patients (22%) in the hand-sewn group and eight patients (26%) in the stapler group (P = NS). Hospital mortality occurred in four patients (13%) of the hand-sewn group and in three patients (10%) of the stapler group (P = NS). After the operation, four patients (14%) in the hand-sewn group and five patients (18%) in the stapler group developed a benign esophageal stricture (P = NS). The mean follow-up time was 24 months, and the rates of freedom from benign stricture and survival were comparable in each group. Performing cervical esophagogastric anastomoses using a circular mechanical stapler had a shorter operating time and a comparable outcome to the hand-sewn method. The circular mechanical stapler could be used as an alternative for cervical esophagogastric anastomosis after resection for esophageal squamous cell cancer.

Implementation of a New High-Volume Circular Stapler in Stapled Anopexy for Hemorrhoidal Disease: Is Patient's Short-Term Outcome Affected by a Higher Volume of Resected Tissue?

PubMed

Grotenhuis, Brechtje A; Nonner, Joost; de Graaf, Eelco J R; Doornebosch, Pascal G

2017-11-02

Stapled anopexy is a safe technique for the treatment of hemorrhoids but carries a higher risk of recurrence, which might be caused due to the limited volume of resected tissue. In this study, we investigated the introduction of a high-volume circular stapling device; in particular whether an increased amount of resected tissue could affect patients' short-term postoperative outcome. Between 2011 and 2015, stapled anopexy was performed for hemorrhoids and/or anal prolapse in 141 patients (n = 25 conventional PPH-3©-stapler versus n = 116 high-volume CHEX©-stapler). In this prospectively collected dataset, operation details and short-term postoperative outcome were compared. With the high-volume stapler, a significantly higher amount of tissue was resected: 9.8 g (range 6.2-11.4) vs. 6.4 g (range 4.9-8.8) with the conventional stapler, p < 0.01. Postoperative short-term outcome did not differ in terms of readmission and complication rates. In all 5 patients who underwent a redo operation for residual hemorrhoids or prolapse, the high-volume stapler was used in the primary operation. A high-volume stapling device for stapled anopexy was introduced safely with a significantly higher amount of resected tissue without a worse short-term outcome. However, it remains unclear whether higher stapling volumes may lead to improved long-term outcome with less reinterventions. © 2017 S. Karger AG, Basel.

The unacknowledged incidence of laparoscopic stapler malfunction.

PubMed

Kwazneski, Douglas; Six, Cheryl; Stahlfeld, Kurt

2013-01-01

Laparoscopic instruments are being used with increasing frequency. Our surgeons recently experienced several independent adverse events involving the laparoscopic linear stapler. Although the Food and Drug Administration maintains a Manufacturer and User Facility Device Experience (MAUDE) database to track such voluntary reports, many events are not reported and the true incidence of adverse events is unknown. We attempted to determine how frequently minimally invasive surgeons have experienced technical problems with a laparoscopic stapler. Following IRB approval, we electronically distributed an anonymous 10-question survey to the 124 minimally invasive program directors listed in the Fellowship Council database. The questions focused on personal or peer experience with laparoscopic stapler malfunction, frequency and type of malfunction, device manufacturer, whether the operation was altered, and root cause analysis of the event. Forty-four of the 124 program directors (35%) completed the survey. The majority reported personal or peer experience (86%) with a linear stapler not releasing (66%) or not firing (73%) after application, with 27% of the respondents noting that this occurred three or more times. The malfunction was not related to type of load, straight (23%) or reticulating (32%) model, or manufacturer (Ethicon 30%, Covidien 36%). One quarter of the respondents noted that the malfunction caused them to significantly alter their operative procedure, and 30% reported that they received no helpful feedback from the manufacturer despite contacting it. Most minimally invasive surgeons have experienced laparoscopic linear stapler malfunction and 25% have had to significantly alter the planned operative procedure due to the malfunction.

Risk factors of postoperative pancreatic fistula after distal pancreatectomy using a triple-row stapler.

PubMed

Kawaida, Hiromichi; Kono, Hiroshi; Watanabe, Mitsuaki; Hosomura, Naohiro; Amemiya, Hidetake; Fujii, Hideki

2018-01-01

Postoperative pancreatic fistula (POPF) is one of the major complications in patients who undergo distal pancreatectomy (DP). Recently, dividing the pancreas by stapler is a commonly performed technique, however, POPF still occurs. Therefore, the purpose of this study was to investigate the risk factors for POPF after DP using a triple-row stapler. A total of 75 patients underwent DP using a triple-row stapler (Endo GIA™ Reloads with Tri-Staple™ Technology 60 mm; COVIDIEN, North Haven, CT, USA) at Yamanashi University from December 2012 to December 2016. The clinical risk factors for POPF after DP using a triple-row stapler were identified based on univariate and multivariate analyses. Clinical POPF (ISGPF Grade B and C) was seen in 7 of 75 patients (9.3%). The body mass index (BMI) was significantly higher in the patients with POPF (26.8 ± 0.5 kg/m 2 ) compared with the patients without POPF (21.4 ± 0.4 kg/m 2 ; a cut-off value; 25.7 kg/m 2 ). In addition, the patients with POPF were significantly younger than the patients without POPF (56.4 ± 5.6 vs 67.0 ± 1.5; a cut-off value was 57.0 years old). BMI and age were found to be significant risk factors for POPF after DP using a triple-row stapler.

Liver transplantation with piggyback anastomosis using a linear stapler: a case report.

PubMed

Akbulut, S; Wojcicki, M; Kayaalp, C; Yilmaz, S

2013-04-01

The so-called piggyback technique of liver transplantation (PB-LT) preserves the recipient's caval vein, shortening the warm ischemic time. It can be reduced even further by using a linear stapler for the cavocaval anastomosis. Herein, we have presented a case of a patient undergoing a side-to-side, whole-organ PB-LT for cryptogenic cirrhosis. Upper and lower orifices of the donor caval vein were closed at the back table using a running 5-0 polypropylene suture. Three stay sutures were then placed on caudal parts of both the recipient and donor caval with a 5-mm venotomies. The endoscopic linear stapler was placed upward through the orifices and fired. A second stapler was placed more cranially and fired resulting in a 8-9 cm long cavocavostomy. Some loose clips were flushed away from the caval lumen. The caval anastomosis was performed within 4 minutes; the time needed to close the caval vein stapler insertion orifices (4-0 polypropylene running suture) before reperfusion was 1 minute. All other anastomoses were performed as typically sutured. The presented technique enables one to reduce the warm ischemic time, which can be of particular importance with marginal grafts. Copyright © 2013 Elsevier Inc. All rights reserved.

Anastomotic stenoses occurring after circular stapling in esophageal cancer surgery.

PubMed

Petrin, G; Ruol, A; Battaglia, G; Buin, F; Merigliano, S; Constantini, M; Pavei, P; Cagol, M; Scappin, S; Ancona, E

2000-07-01

Circular staplers have reduced the incidence of anastomotic leaks in esophagovisceral anastomosis. However, the prevalence of stenosis is greater with staplers than with manual suturing. The aim of this study was to analyze potential risk factors for the onset of anastomotic stenoses and to evaluate their treatment and final outcome. Between 1990 and 1995, 187 patients underwent esophagectomy and esophagogastrostomy with anastomosis performed inside the chest using a circular stapler. Twenty-three patients (12.3%) developed an anastomotic stenosis. The incidence of strictures was inversely related to the diameter of the stapler. Concomitant cardiovascular diseases; morphofunctional disorders of the tubulized stomach, such as those related to duodenogastric reflux; and neoadjuvant chemotherapy were also recognized as significant risk factors. Endoscopic dilatations proved safe and were effective in the treatment of most anastomotic stenoses. To reduce the risk of anastomotic stenosis after stapled intrathoracic esophagogastrostomy, adequate vascularization of the viscera being anastomized should be maintained, and it is mandatory to use the largest circular stapler suitable. Furthermore, it is essential to reduce the negative inflammation-inducing effects of duodenogastroesophageal reflux to a minimum. Endoscopic dilatations are safe and effective in curing the great majority of anastomotic stenoses.

Stapler access and visibility in the deep pelvis: A comparative human cadaver study between a computerized right angle linear cutter versus a curved cutting stapler

PubMed Central

2011-01-01

Purpose Distal rectal stapling is often challenging because of limited space and visibility. We compared two stapling devices in the distal rectum in a cadaver study: the iDrive™ right angle linear cutter (RALC) (Covidien, New Haven, CT) and the CONTOUR® curved cutter (CC) (Ethicon Endo-Surgery, Cincinnati, OH). Methods Twelve male cadavers underwent pelvic dissection by 4 surgeons. After rectal mobilization as in a total mesorectal excision, the staplers were applied to the rectum as deep as possible in both the coronal and sagittal positions. The distance from the pelvic floor was measured for each application. A questionnaire rated the visibility and access of the stapling devices. Measurements were taken between pelvic landmarks to see what anatomic factors hinder the placement of a distal rectal stapler. Results The median (range) distance of the stapler from the pelvic floor in the coronal position for the RALC was 1.0 cm (0-4.0) vs. 2.0 cm (0-5.0) for the CC, p = 0.003. In the sagittal position, the median distance was 1.6 cm (0-3.5) for the RALC and 3.3 cm (0-5.0) for the CC, p < 0.0001. The RALC scored better than the CC in respect to: 1. interference by the symphysis pubis, 2. number of stapler readjustments, 3. ease of placement in the pelvis, 4. impediment of visibility, 5. ability to hold and retain tissue, 6. visibility rating, and 7. access in the pelvis. A shorter distance between the tip of the coccyx and the pubic symphysis correlated with a longer distance of the stapler from the pelvic floor (p = 0.002). Conclusions The RALC is superior to the CC in terms of access, visibility, and ease of placement in the deep pelvis. This could provide important clinical benefit to both patient and surgeon during difficult rectal surgery. PMID:21871120

[Electrocautery versus Stapler for Intersegmental Plane Dissection in Complete 
Thoracoscopic Segmentectomy].

PubMed

Liu, Haibo; Lin, Gang; Zhang, Shijie; Huang, Weiming; Shang, Xueqian; Li, Jian

2017-01-20

Complete thoracoscopic segmentectomy gained great attention with the high detection rate of early lung cancer. Electrocautery and stapler are most commonly used in dividing the intersegmental plane in pulmonary segmentectomy. However, few reports comparing the two methods exist; all of which contrapose an open approach because complete thoracoscopic approach is not mentioned. The aim of this study is to evaluate and compare the safety and efficacy of the two methods in intersegmental plane dissection during complete thoracoscopic pulmonary segmentectomy. A retrospective review of prospectively collected data was obtained for 58 consecutive patients who were treated by segmentectomy between September 2013 and March 2016 at a single center. The patients were divided into two groups according to the methods in intersegmental plane dissection. Thirty patients underwent intersegmental plane dissection with electrocautery (electrocautery group), and 28 patients underwent the same process using staplers (stapler group). Preoperative, intraoperative, and postoperative variables for patients were compared between two groups. The operative time of electrocautery group was longer than that of the stapler group [(248.70±54.46) min vs (209.39±67.25) min, P=0.017]. Furthermore, no statistical difference was found between two groups in intraoperative blood loss (60.00 mL vs 65.00 mL), total drainage volume (445.00 mL vs 590.00 mL), drainage volume in first 3 days after surgery [(455.33±318.333) mL vs (422.32±194.95) mL], duration of chest tube drainage [(4.20±2.07) d vs (4.11±1.61) d], postoperative hospital stay [(6.33±2.98) d vs (5.89±1.55) d], and incidence of minor postoperative complication [16.7% (5/30) vs 7.1% (2/28)]. Although operative time was longer in electrocautery group than in stapler group, using electrocautery for intersegmental plane dissection in complete thoracoscopic segmentectomy appeared to be a very safe and feasible procedure compared with stapler.

[Mechanical versus manual suture in the jejunal esophageal anastomosis after total gastrectomy in gastric cancer].

PubMed

Celis, J; Ruiz, E; Berrospi, F; Payet, E

2001-01-01

To compare the leakage rate of esophagojejunal anastomosis performed with stapler or hand sutures. We studied a series of 367 patients who underwent total gastrectomy for gastric cancer at the Instituto de Enfermedades Neoplásicas (Lima-Peru) from 1986 to 1999. In 197 patients esophagojejunal anastomosis was performed with stapler and in 170 with manual sutures. There were no differences between both groups with regard to age, TNM stage, operating time and hospital stay. There were 8 anastomotic leakage (4.1%) in the stapler group and 4 (2.4%) in the hand sutures group (p> 0.05). Of these 12 cases, 2 patients (16%) died of causes directly related to the leak of the esophagojejunal anastomosis. There were no statistical differences in the rate of leakage of the esophagojejunal anastomosis performed with stapler or hand sutures, thus both techniques should be accepted as standard procedures.

Reverse Transrectal Stapling Technique Using the EEA Stapler: An Alternative Approach in Difficult Reversal of Hartmann’s Procedure

PubMed Central

Zachariah, Sanoop K.

2010-01-01

The introduction of circular end-to-end stapling devices (CEEA OR EEA stapler) into colorectal surgery have revolutionised anastomotic techniques. The EEA stapler is generally regarded as an instrument that is safe, reliable, and simple to operate. Despite it’s popularity, very little information is available regarding the technical difficulties encountered during surgery. The routine technique to perform an end-to-end circular colonic anastomosis is to introduce the instrument distally through the anus (transrectal/transanal approach) and attach it to the anvil which is purse stringed at the distal end of the proximal bowel to be anastomosed. Two cases of reversal of Hartmann’s procedure for perforated diverticulitis are described in the present study, where difficulty was experienced while using the EEA stapler in the routine method. Hence, an alternative reverse technique which was used is presented. PMID:22091338

[A new technic for esophago-enteral anastomosis with a mechanical stapler without purse-string sutures].

PubMed

Liboni, A; Mari, C; Zamboni, P; Uzzau, A; Noce, L; Bucoliero, F; Mele, M; Masala, C

1989-01-01

Staplers have improved the results of esophageal surgery, in our experience and in others experience, as esophago-enteric anastomoses have become safer and faster than when manual suturing is used. Probably one of the last problems in the stapler technique, especially in the thoracic area, is the performance of on adequate esophageal purse-string suture: an improper performance of this suture can cause a dangerous leak of the anastomosis. So, many surgeons, to reduce the risk of esophageal dehiscence connected with the esophageal purse-string, use either purse-string devices or alternative methods such as a second handsewn purse-string, U stitches of the esophagus, etc. We think that the risk of improper anastomoses after esophageal resection can be reduced if the need for the esophageal purse-string can be eliminated. This work shows our personal technique for performing esophagoenterostomy, especially in the thoracic area, using the new CEEA stapler (Autosuture) without esophageal purse-string sutures. According to the modified procedure the stapler anvil and the mini rod are introduced in the esophagectomy and a 2-0 thread is knotted around the CEEA mini rod. Then the esophageal mutilated part is closed by a linear stapler keeping a syringe needle, which contains the thread, through the linear suture. Then, using the thread as a pulling system, the surgeon makes the needle and the tip of the mini rod slide out of the esophageal suture. Now the surgeon can reassemble the CEEA and perform the anastomosis. There are many clinical reports that cite no leaks following circular stapled anastomoses across linear stapled closures.

[Errors and dangers in intestinal sutures and anastomoses using stapler suture instruments (EEA, TA55, TA90, GIA)].

PubMed

Gögler, E

1985-01-01

In different tables the most important faults with enteral sutures and anastomoses in general and at special operations are demonstrated: end-to-end anastomoses with congruent diameter, anastomoses with different diameters, B I, B II, low anterior resection, esophago-jejunostomy. Only if the surgeon has experience in standard technique, faults and risks with mechanical staplers and manual sutures, the advantage-progress of staplers will be effective avoiding special risks. Surgeons without experience may produce real catastrophes which may turn out hopeless without training in manual suture technique.

Effects of the closing speed of stapler jaws on bovine pancreases.

PubMed

Chikamoto, Akira; Hashimoto, Daisuke; Ikuta, Yoshiaki; Tsuji, Akira; Abe, Shinya; Hayashi, Hiromitsu; Imai, Katsunori; Nitta, Hidetoshi; Ishiko, Takatoshi; Watanabe, Masayuki; Beppu, Toru; Baba, Hideo

2014-01-01

The division of the pancreatic parenchyma using a stapler is important in pancreatic surgery, especially for laparoscopic surgery. However, this procedure has not yet been standardized. We analyzed the effects of the closing speed of stapler jaws using bovine pancreases for each method. Furthermore, we assigned 10 min to the slow compression method, 5 min to the medium-fast compression method, and 30 s to the rapid compression (RC) method. The time allotted to holding (3 min) and dividing (30 s) was equal under each testing situation. We found that the RC method showed a high-pressure tolerance compared with the other two groups (rapid, 126 ± 49.0 mmHg; medium-fast, 55.5 ± 25.8 mmHg; slow, 45.0 ± 15.7 mmHg; p < 0.01), although the histological findings of the cut end were similar. The histological findings of the pancreatic capsule and parenchyma after the compression by staple jaws without firing also were similar. RC may provide an advantage as measured by pressure tolerance. A small series of distal pancreatectomy with a stapler that compares the speed of different stapler jaw closing times is required to prove the feasibility of these results after the confirmation of the advantages of the RC method under various settings.

Concept design and simulation study on a "phantom" anvil for circular stapler.

PubMed

Rulli, Francesco; Kartheuser, Alex; Amirhassankhani, Sasan; Mourad, Michel; Stefani, Mario; de Ferrá Aureli, Andrés; Sileri, Pierpaolo; Valentini, Pier Paolo

2015-04-01

Complications and challenges arising from the intraoperative double-stapling technique are seldom reported in colorectal surgery literature. Partial or full-thickness rectal injuries can occur during the introduction and the advancement of the circular stapler along the upper rectum. The aim of this study is to address some of these issues by designing and optimizing a "phantom" anvil manufactured to overcome difficulties throughout the rectal introduction and advancement of the circular stapler for the treatment of benign and malignant colon disease. The design of the "phantom" anvil has been performed using computer-aided modeling techniques, finite element investigations, and 2 essential keynotes in mind. The first one is the internal shape of the anvil, which is used for the connection to the gun. The second is the shape of the cap, which makes possible the insertion of the gun through the rectum. The "phantom" anvil has 2 functional requirements, which have been taken into account. The design has been optimized to avoid colorectal injuries, neoplastic dissemination (ie, mechanical seeding) and to reduce the fecal contamination. Numerical simulations show that a right combination of both top and bottom fillet radii of the shape of the anvil can reduce the stress for the considered anatomic configuration of >90%. Both the fillet radii at the top and the bottom of the device influence the local stress of the colon rectum. A dismountable device, which is used only for the insertion and advancement of the stapler, allows a dedicated design of its shape, keeping the remainder of the stapler unmodified. Computer-aided simulations are useful to perform numerical investigations to optimize the design of this auxiliary part for both the safety of the patient and the ease of the stapler advancement through the rectum.

Influence of circular stapler diameter on postoperative stenosis after laparoscopic gastrojejunal anastomosis in morbid obesity.

PubMed

Markar, Sheraz R; Penna, Marta; Venkat-Ramen, Vishal; Karthikesalingam, Alan; Hashemi, Majid

2012-01-01

The aim of the present study was to provide a pooled analysis of individual small trials comparing 21-mm and 25-mm circular stapled laparoscopic gastrojejunal (GJ) anastomosis in morbid obesity surgery. A systematic literature search of MEDLINE, Embase, and Cochrane library databases was performed to identify all relevant studies comparing 21-mm and 25-mm circular stapled laparoscopic GJ anastomosis in morbid obesity surgery. The primary outcomes were GJ stenosis and the interval to GJ stenosis. The secondary outcomes were the estimated weight loss, GJ diameter, and the number of endoscopic dilations. Pooled odds ratios were calculated for categorical outcomes and weighted mean differences for continuous outcomes. Five trials were included, comprising 1217 patients (393 with 21-mm and 824 with 25-mm circular GJ anastomoses). The primary outcome analysis revealed a significantly increased incidence of intraluminal stenosis associated with the 21-mm circular stapler (pooled odds ratio 3.54; P < .0001). The secondary outcome analysis revealed a significantly reduced GJ anastomotic diameter on endoscopy with the 21-mm circular stapler group (weighted mean difference -1.67; P = .002). Statistical analysis revealed no significant difference between the groups for the interval to stenosis, number of endoscopic dilations, and estimated weight loss. The results of the present pooled analysis have demonstrated a significantly increased incidence of symptomatic stenosis associated with the 21-mm circular stapler compared with the 25-mm stapler. This serves as evidence to validate the preferential selection of the 25-mm circular stapler for laparoscopic GJ bypass. Copyright © 2012 American Society for Metabolic and Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

“Five on a dice” port placement for robot-assisted thoracoscopic right upper lobectomy using robotic stapler

PubMed Central

Chan, Edward Y.

2017-01-01

Early versions of the da Vinci robot system (S and Si) have been used to perform pulmonary lung resection with severe limitations. The lack of a vascular robot stapler required the presence of a trained bedside assistant whose role was to place, manipulate and fire the stapler around major vascular structures. Thus, the techniques developed for the Si robot required a skilled bedside assistant to perform stapling of the hilar structure and manipulation of the lung. With the advent of the da Vinci Xi system with a vascular robot stapler, we postulated that we could develop a new port placement and technique to provide total control for the surgeon during the pulmonary lung resection. We found that the “five on a dice” port placement and technique allows for minimal assistance during the lobectomy with full control by the surgeon. This technique uses the full capability of the Xi robot to make the robot-assisted lobectomy a safe and ergonomic operation. PMID:29312746

"Five on a dice" port placement for robot-assisted thoracoscopic right upper lobectomy using robotic stapler.

PubMed

Kim, Min P; Chan, Edward Y

2017-12-01

Early versions of the da Vinci robot system (S and Si) have been used to perform pulmonary lung resection with severe limitations. The lack of a vascular robot stapler required the presence of a trained bedside assistant whose role was to place, manipulate and fire the stapler around major vascular structures. Thus, the techniques developed for the Si robot required a skilled bedside assistant to perform stapling of the hilar structure and manipulation of the lung. With the advent of the da Vinci Xi system with a vascular robot stapler, we postulated that we could develop a new port placement and technique to provide total control for the surgeon during the pulmonary lung resection. We found that the "five on a dice" port placement and technique allows for minimal assistance during the lobectomy with full control by the surgeon. This technique uses the full capability of the Xi robot to make the robot-assisted lobectomy a safe and ergonomic operation.

Laparoscopic Double Discoid Resection With a Circular Stapler for Bowel Endometriosis.

PubMed

Kondo, William; Ribeiro, Reitan; Zomer, Monica Tessmann; Hayashi, Renata

2015-01-01

To demonstrate the technique of laparoscopic double discoid resection with a circular stapler for bowel endometriosis. Case report (Canadian Task Force classification III). Private hospital in Curitiba, Paraná, Brazil. A 33-year-old woman was referred to our service complaining about cyclic dysmenorrhea, dyspareunia, chronic pelvic pain, and cyclic dyschezia. Transvaginal ultrasound with bowel preparation showed a 6-cm endometriotic nodule at the retrocervical area, uterosacral ligaments, posterior vaginal fornix, and anterior rectal wall, infiltrating up to the submucosa, 5 cm far from the anal verge. Under general anesthesia, the patient was placed in the dorsal decubitus position with her arms alongside her body and her lower limbs in abduction. Pneumoperitoneum was achieved using a Veres needle placed at the umbilicus. Four trocars were placed: a 10-mm trocar at the umbilicus for the zero-degree laparoscope; a 5-mm trocar at the right anterosuperior iliac spine; a 5-mm trocar in the midline between the umbilicus and the pubic symphysis, approximately 8 to 10 cm inferior to the umbilical trocar; and a 5-mm trocar at the left anterosuperior iliac spine. The entire pelvis was inspected for endometriotic lesions, and all implants in the anterior compartment of the pelvis were resected. The lesions located at the ovarian fossae were completely removed. The ureters were identified bilaterally, and both para-rectal fossae were dissected. The right hypogastric nerve was released from the disease laterally. The lesion was separated from the retrocervical area, and the posterior vaginal fornix was resected (reverse technique), leaving the disease attached to the anterior surface of the rectum. The lesion was shaved off the anterior rectal wall using a harmonic scalpel. A x-shaped stitch was placed at the anterior rectal wall using 2-0 mononylon suture. A 33-mm circular stapler was placed transanally under laparoscopic control, and once it reached the area to be resected, it was opened. A gap was created between the envil and the stapler. The anterior rectal wall was placed inside this gap with the aid of the stitch at the anterior rectal wall. The stapler was fired, and a piece of the anterior rectal wall was resected. The same procedure was performed using a 29-mm circular stapler, which allowed for the complete removal of the lesion. We usually perform the second discoid resection using a 29-mm circular stapler to allow an easy progression of the stapler through the rectum beyond the first stapler line, so not to put too much pressure on it. In our experience, the first discoid resection removes most of the disease, and the second discoid resection is only needed to remove a small amount of residual disease, along with the first staple line. The procedure took 177 min, and the estimated blood loss was 100 mL. The patient started clear liquids 6 hours after the procedure, and was discharged 19 hours after that [1]. Pathological examination of the 2 strips of the anterior rectal wall revealed infiltration of the bowel wall by endometriotic tissue. She had an uneventful postoperative course, and was able to re-start sexual intercourse 50 days after surgery. Between January 2010 and January 2015, 315 women underwent laparoscopic surgery for the treatment of bowel endometriosis in our service. Among them, 16 (5.1%) were operated on by using the double discoid resection technique. Median age of the patients was 34 years, and median body mass index was 25.9 kg/m(2). Median preoperative cancer antigen-125 level was 26.5 U/mL (normal value is <35 U/mL). Median size of the rectosigmoid nodule was 35 mm (range: 30-60), and median distance from the anal verge was 10.5 cm (range: 5-15 cm). Median surgical time was 160 min (range: 54-210 min). Concomitant procedures included hysterectyomy (n = 5), partial cystectomy (n = 3), resection of the posterior vaginal fornix (n = 4), and appendectomy (n = 1). Median estimated intraoperative bleeding was 32.5 mL (range: 30-100), and median time of hospitalization was 19 hours (range: 10-41). Median American Fertility Society score was 46 (10-102). Two minor complications (12.5%) occurred in this initial series: 1 patient required bladder catheterization for urinary retention; and 1 patient developed a urinary tract infection that required oral antibiotic treatment. One major complication (6.2%) was observed; the patient developed fever and abdominal pain on the fourth postoperative day. She was re-operated, and the intraoperative diagnosis was pelviperitonitis. The abdominal cavity was inspected for any dehiscence of the bowel and then washed. She was discharged on the second day after re-operation with oral antibiotic therapy. In our daily practice, we are used to discharging our patients soon in the postoperative setting (19 hours for rectal shaving or discoid resection and 28 hours for segmental bowel resection) [1] because the rate of postoperative fistula seems to be low [2]. Because we still have not seen any fistulas after conservative surgery (rectal shaving, discoid resection, and double discoid resection), we usually prefer to perform this type of surgery compared with segmental bowel resection, when possible. Laparoscopic double discoid resection with circular stapler may be an alternative to segmental bowel resection in selected patients with bowel endometriosis. Copyright © 2015 AAGL. Published by Elsevier Inc. All rights reserved.

Evaluation of stapler hepatectomy during a laparoscopic liver resection

PubMed Central

Buell, Joseph F; Gayet, Brice; Han, Ho-Seong; Wakabayashi, Go; Kim, Ki-Hun; Belli, Giulio; Cannon, Robert; Saggi, Bob; Keneko, Hiro; Koffron, Alan; Brock, Guy; Dagher, Ibrahim

2013-01-01

Methods An international database of 1499 laparoscopic liver resections was analysed using multivariate and Kaplan–Meier analysis. Results In total, 764 stapler hepatectomies (SH) were compared with 735 electrosurgical resections (ER). SH was employed in larger tumours (4.5 versus 3.8 cm; P < 0.003) with decreased operative times (2.6 versus 3.1 h; P < 0.001), blood loss (100 versus 200 cc; P < 0.001) and length of stay (3.0 versus 7.0 days; P < 0.001). SH incurred a trend towards higher complications (16% versus 13%; P = 0.057) including bile leaks (26/764, 3.4% versus 16/735, 2.2%: P = 0.091). To address group homogeneity, a subset analysis of lobar resections confirmed the benefits of SH. Kaplan–Meier analysis in non-cirrhotic and cirrhotic patients confirmed equivalent patient (P = 0.290 and 0.118) and disease-free survival (P = 0.120 and 0.268). Multivariate analysis confirmed the parenchymal transection technique did not increase the risk of cancer recurrence, whereas tumour size, the presence of cirrhosis and concomitant operations did. Conclusions A SH provides several advantages including: diminished blood loss, transfusion requirements and shorter operative times. In spite of the smaller surgical margins in the SH group, equivalent recurrence and survival rates were observed when matched for parenchyma and extent of resection. PMID:23458439

Intrathoracic vertical overhanging approach for placement of an endo-stapler during single-port video-assisted thoracoscopic lobectomy†.

PubMed

Guo, Chenglin; Liu, Chengwu; Lin, Feng; Liu, Lunxu

2016-01-01

Single-port video-assisted thoracoscopic lobectomy is still difficult for most thoracic surgeons. Placement of an endo-stapler is one of the key issues when handling the bronchus or pulmonary vessels through one incision, especially if it would interfere with the traction belt. Therefore, we developed a novel method with an intrathoracic vertical overhanging approach to make the placement of the endo-stapler easier during single-port video-assisted thoracoscopic surgery lobectomy, and share our experience in this paper. © The Author 2015. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Rapid Prototyping 3D Model in Treatment of Pediatric Hip Dysplasia: A Case Report

PubMed Central

Holt, Andrew M.; Starosolski, Zbigniew; Kan, J. Herman

2017-01-01

Abstract Background: Rapid prototyping is an emerging technology that integrates common medical imaging with specialized production mechanisms to create detailed anatomic replicas. 3D-printed models of musculoskeletal anatomy have already proven useful in orthopedics and their applications continue to expand. Case Description: We present the case of a 10 year-old female with Down syndrome and left acetabular dysplasia and chronic hip instability who underwent periacetabular osteotomy. A rapid prototyping 3D model was created to better understand the anatomy, counsel the family about the problem and the surgical procedure, as well as guide surgical technique. The intricate detail and size match of the model with the patient’s anatomy offered unparalleled, hands-on experience with the patient’s anatomy pre-operatively and improved surgical precision. Conclusions: Our experience with rapid prototyping confirmed its ability to enhance orthopedic care by improving the surgeon’s ability to understand complex anatomy. Additionally, we report a new application utilizing intraoperative fluoroscopic comparison of the model and patient to ensure surgical precision and minimize the risk of complications. This technique could be used in other challenging cases. The increasing availability of rapid prototyping welcomes further use in all areas of orthopedics. PMID:28852351

Rapid Prototyping 3D Model in Treatment of Pediatric Hip Dysplasia: A Case Report.

PubMed

Holt, Andrew M; Starosolski, Zbigniew; Kan, J Herman; Rosenfeld, Scott B

2017-01-01

Rapid prototyping is an emerging technology that integrates common medical imaging with specialized production mechanisms to create detailed anatomic replicas. 3D-printed models of musculoskeletal anatomy have already proven useful in orthopedics and their applications continue to expand. We present the case of a 10 year-old female with Down syndrome and left acetabular dysplasia and chronic hip instability who underwent periacetabular osteotomy. A rapid prototyping 3D model was created to better understand the anatomy, counsel the family about the problem and the surgical procedure, as well as guide surgical technique. The intricate detail and size match of the model with the patient's anatomy offered unparalleled, hands-on experience with the patient's anatomy pre-operatively and improved surgical precision. Our experience with rapid prototyping confirmed its ability to enhance orthopedic care by improving the surgeon's ability to understand complex anatomy. Additionally, we report a new application utilizing intraoperative fluoroscopic comparison of the model and patient to ensure surgical precision and minimize the risk of complications. This technique could be used in other challenging cases. The increasing availability of rapid prototyping welcomes further use in all areas of orthopedics.

Training for single port video assisted thoracoscopic surgery lung resections.

PubMed

McElnay, Philip J; Lim, Eric

2015-11-01

With many surgical training programmes providing less time for training it can be challenging for trainees to acquire the necessary surgical skills to perform complex video assisted thoracoscopic surgery (VATS) lung resections. Indeed as the utilization of single port operations increases the need to approach the operating theatre with already-existing excellent hand-eye coordination skills increases. We suggest that there are a number of ways that trainees can begin to develop these necessary skills. Firstly, using computer games that involve changing horizons and orientations. Secondly, utilizing box-trainers to practice using the thoracoscopic instruments. Thirdly, learning how essential tools such as the stapler work. Trainees will then be able to progress to meaningfully assisting in theatre and indeed learning how to perform the operation themselves. At this stage is useful to observe expert surgeons whilst they operate-to watch both their technical and non-technical skills. Ultimately, surgery is a learned skill and requires implementation of these techniques over a sustained period of time.

Pilot study on preventing anastomotic leakage in stapled gastroesophageal anastomosis

PubMed Central

Huang, Weiming; Liu, Xiangzheng; Li, Jian

2017-01-01

Background This study explored how to improve the surgical technique to reduce or avoid anastomotic leakage. Methods From January 2012 to December 2016, 101 consecutive patients with cancer of the esophagus or gastroesophageal junction underwent stapled gastroesophageal anastomosis. The procedure included creating a tube‐type stomach, fixing an inserted anvil, inspecting mucosa‐to‐mucosa alignment in the lumen under direct vision after firing the stapler, and, if found, manually repairing a rupture of the mucous membrane of the anastomosis. Results A rupture of the mucous membrane of the anastomosis was found in four out of the 101 patients and manually repaired. No postsurgical anastomotic leakage occurred. All patients recovered well and the average postoperative stay was 10.4 days. There was no mortality within 30 days after surgery. Conclusion It is critical to inspect the integrality of the luminal mucous membrane of the anastomosis under direct vision in order to prevent anastomotic leakage in surgical resection of esophageal and gastroesophageal junction malignancies. PMID:29130643

Evaluation and Impact of Workflow Interruptions During Robot-assisted Surgery.

PubMed

Allers, Jenna C; Hussein, Ahmed A; Ahmad, Nabeeha; Cavuoto, Lora; Wing, Joseph F; Hayes, Robin M; Hinata, Nobuyuki; Bisantz, Ann M; Guru, Khurshid A

2016-06-01

To analyze and categorize causes for interruptions during robot-assisted surgery. We analyzed 10 robot-assisted prostatectomies that were performed by 3 surgeons from October 2014 to June 2015. Interruptions to surgery were defined in terms of duration, stage of surgery, personnel involved, reasons, and impact of the interruption on the surgical workflow. The main reasons for interruptions included the following: console surgeons switching (29%); preparation of the surgical equipment, such as cleaning or changing the camera (29%) or an instrument (27%); or when a suture, stapler, or clip was needed (12%). The most common interruption duration was 10-29 seconds (47.6%), and the least common interruption duration was greater than 90 seconds (3.6%). Additionally, about 14% of the interruptions were considered avoidable, whereas the remaining 86% of interruptions were necessary for surgery. By identifying and analyzing interruptions, we can develop evidence-based strategies to improve operating room efficiency, lower costs, and advance patient safety. Copyright © 2016 Elsevier Inc. All rights reserved.

Mechanical suture in rectal cancer.

PubMed

Cheregi, Cornel Dragos; Simon, Ioan; Fabian, Ovidiu; Maghiar, Adrian

2017-01-01

Colorectal cancer is one of the most frequent digestive malignancies, being the third cause of death by cancer, despite early diagnosis and therapeutic progress made over the past years. Standard treatment in these patients is to preserve the anal sphincter with restoration of intestinal function by mechanical colorectal anastomosis or coloanal anastomosis, and to maintain genitourinary function by preservation of hypogastric nerves. In order to emphasize the importance of this surgical technique in the Fourth Surgical Clinic of the CF Clinical Hospital Cluj-Napoca, we conducted a prospective observational interventional study over a 3-year period (2013-2016) in 165 patients hospitalized for rectal and rectosigmoid adenocarcinoma in various disease stages, who underwent Dixon surgery using the two techniques of manual and mechanical end-to-end anastomosis. For mechanical anastomosis, we used Covidien and Panther circular staplers. The patients were assigned to two groups, group A in which Dixon surgery with manual end-to-end anastomosis was performed (116 patients), and group B in which Dixon surgery with mechanical end-to-end anastomosis was carried out (49 patients). Mechanical anastomosis allowed to restore intestinal continuity following low anterior resection in 21 patients with lower rectal adenocarcinoma compared to 2 patients in whom intestinal continuity was restored by manual anastomosis, with a statistically significant difference (p<0.000001). The double-row mechanical suture technique is associated with a reduced duration of surgery (121.67 minutes for Dixon surgery with mechanical anastomosis, compared to 165.931 minutes for Dixon surgery with manual anastomosis, p<0.0001). The use of circular transanal staplers facilitates end-to-end anastomosis by double-row mechanical suture, allowing to perform low anterior resection in situations when the restoration of intestinal continuity by manual anastomosis is technically not possible, with the aim to preserve the anal sphincter, to restore intestinal function and maintain genitourinary function through preservation of hypogastric nerves.

Mechanical suture in rectal cancer

PubMed Central

CHEREGI, CORNEL DRAGOS; SIMON, IOAN; FABIAN, OVIDIU; MAGHIAR, ADRIAN

2017-01-01

Background and aims Colorectal cancer is one of the most frequent digestive malignancies, being the third cause of death by cancer, despite early diagnosis and therapeutic progress made over the past years. Standard treatment in these patients is to preserve the anal sphincter with restoration of intestinal function by mechanical colorectal anastomosis or coloanal anastomosis, and to maintain genitourinary function by preservation of hypogastric nerves. Methods In order to emphasize the importance of this surgical technique in the Fourth Surgical Clinic of the CF Clinical Hospital Cluj-Napoca, we conducted a prospective observational interventional study over a 3-year period (2013–2016) in 165 patients hospitalized for rectal and rectosigmoid adenocarcinoma in various disease stages, who underwent Dixon surgery using the two techniques of manual and mechanical end-to-end anastomosis. For mechanical anastomosis, we used Covidien and Panther circular staplers. The patients were assigned to two groups, group A in which Dixon surgery with manual end-to-end anastomosis was performed (116 patients), and group B in which Dixon surgery with mechanical end-to-end anastomosis was carried out (49 patients). Results Mechanical anastomosis allowed to restore intestinal continuity following low anterior resection in 21 patients with lower rectal adenocarcinoma compared to 2 patients in whom intestinal continuity was restored by manual anastomosis, with a statistically significant difference (p<0.000001). The double-row mechanical suture technique is associated with a reduced duration of surgery (121.67 minutes for Dixon surgery with mechanical anastomosis, compared to 165.931 minutes for Dixon surgery with manual anastomosis, p<0.0001). Conclusion The use of circular transanal staplers facilitates end-to-end anastomosis by double-row mechanical suture, allowing to perform low anterior resection in situations when the restoration of intestinal continuity by manual anastomosis is technically not possible, with the aim to preserve the anal sphincter, to restore intestinal function and maintain genitourinary function through preservation of hypogastric nerves. PMID:28781527

Severe rectal bleeding following PPH-stapler procedure for haemorroidal disease

PubMed Central

AMMENDOLA, M.; SAMMARCO, G.; CARPINO, A.; FERRARI, F.; VESCIO, G.; SACCO, R.

2014-01-01

PPH-stapler procedure for treatment of haemorrhoidal prolapse classified P4E4 is an important improvement, but may be followed by severe postoperative complications of which haemorrhage is one of the most serious early events. We report a case of double severe rectal bleeding following PPH-stapler procedure for haemorrhoidal disease classified P4E4 according to PATE 2000 (circumferential prolapse). A 48 years old female patient was presented to our attention. She was affected by haemorrhoidal prolapse P4E4, constipation and rectal bleeding. PPH-procedure is a technique for management of the haemorrhoidal disease. Postoperative complications may be serious and haemorrhage is the most important early complication. PMID:25644731

Use of prototyping in preoperative planning for patients with head and neck tumors.

PubMed

de Farias, Terence Pires; Dias, Fernando Luiz; Galvão, Mário Sérgio; Boasquevisque, Edson; Pastl, Ana Carolina; Albuquerque Sousa, Bruno

2014-12-01

Prototyping technologies for reconstructions consist of obtaining a 3-dimensional model of the object of interest. Solid models are constructed by the deposition of materials in successive layers. The purpose of this study was to perform a double-blind, randomized, prospective study to evaluate the efficacy of prototype use in head and neck surgeries. Thirty-seven cases were randomized into prototype and nonprototype groups. The following factors were recorded: the time of plate and locking screw apposition, flap size, time for reconstruction, and an aesthetic evaluation. The prototype group exhibited a reduced surgical time (43.7 minutes vs 127.7 minutes, respectively; p = .001), a tendency to reduce the size of the bone flap taken for reconstruction, and better aesthetic results than the group that was not prototyped. The use of prototyping demonstrated a trend toward a reduced surgical time, smaller bone flaps, and better aesthetic results. © 2014 Wiley Periodicals, Inc.

[Direct electric conduction glove for laparoscopic surgical instruments. Preliminary results of a prototype].

PubMed

Gentilli, Sergio; Morgandoa, Andrea; Velardocchia, Mauro; Pessione, Silvia; Pizzorno, Chiara

2007-01-01

The authors present their prototype of a system for electrical conduction in direct contact with laparoscopic tools, devised, designed and produced by them at the Politecnico di Torino Department of Mechanical Engineering. The system consists of a two-sided plate, one side being a non-conducting adhesive surface to stick to the surgical glove and the other a thin, flexible conductor shell. The authors used the instrument with surgical tools with metal handles during 4 laparoscopic procedures. Nowadays the method commonly used to electrify laparoscopic tools is by using a wire plugged to a fixed conducting point on the instrument. The prototype described here was devised and produced to avoid some of the awkwardness encountered during the numerous manoeuvres required to connect and disconnect the wire at the time of surgical intervention. This device permits the direct transfer (by contact) of electrical energy from the wire to surgical tools. The advantage is greater rapidity in changing surgical tools, with the possibility of immediately obtaining an electrified instrument in the surgeon's hand.

Dangers in the Use of Staplers in Liver Surgery

PubMed Central

Riga, Angela; Karanjia, Nariman

2007-01-01

The use of endoscopic vascular staplers has become common practice in recent years both in open and minimally invasive surgery. The technological advances, however, are not free of problems. In our practice, we have come across two cases where the Endopath ETS Flex 45 Endoscopic Articulating Linear Cutter failed with dangerous consequences. PMID:17999829

The Motivational Effects of Participation Versus Goal Setting on Performance.

DTIC Science & Technology

1982-01-01

the premeasure. Upon completing the two circles the subjects was asked to reload the stapler to ensure that it would be full1 for the pretest and to...34, and immediately reload the stapler and con- tinue working. The experimenter would then automatically stop and restart the stopwatch as required so that

Comparative Study of Hand-Sutured versus Circular Stapled Anastomosis for Gastrojejunostomy in Laparoscopy Assisted Distal Gastrectomy.

PubMed

Seo, Su Hyun; Kim, Ki Han; Kim, Min Chan; Choi, Hong Jo; Jung, Ghap Joong

2012-06-01

Mechanical stapler is regarded as a good alternative to the hand sewing technique, when used in gastric reconstruction. The circular stapling method has been widely applied to gastrectomy (open orlaparoscopic), for gastric cancer. We illustrated and compared the hand-sutured method to the circular stapling method, for Billroth-II, in patients who underwent laparoscopy assisted distal gastrectomy for gastric cancer. Between April 2009 and May 2011, 60 patients who underwent laparoscopy assisted distal gastrectomy, with Billroth-II, were enrolled. Hand-sutured Billroth-II was performed in 40 patients (manual group) and circular stapler Billroth-II was performed in 20 patients (stapler group). Clinicopathological features and post-operative outcomes were evaluated and compared between the two groups. Nosignificant differences were observed in clinicopathologic parameters and post-operative outcomes, except in the operation times. Operation times and anastomosis times were significantly shorter in the stapler group (P=0.004 and P<0.001). Compared to the hand-sutured method, the circular stapling method can be applied safely and more efficiently, when performing Billroth-II anastomosis, after laparoscopy assisted distal gastrectomy in patients with gastric cancer.

Factors predictive of survival after stapler hepatectomy of hepatocellular carcinoma: a multivariate, single-center analysis.

PubMed

Hoffmann, Katrin; Müller-Bütow, Verena; Franz, Clemens; Hinz, Ulf; Longerich, Thomas; Büchler, Markus W; Schemmer, Peter

2014-02-01

New technical devices for hepatic parenchymal transection have improved perioperative safety and patient survival. The aim of the present study was to determine the oncological outcome after stapler hepatectomy in patients with HCC. Data of 95 patients who underwent stapler hepatectomy for HCC between 2001 and 2011 were analyzed retrospectively regarding clinical safety of the procedure and predictive factors for survial. Thirty-nine minor (≤2 segments) and 56 major (≥3 segments) hepatic resections were performed. The median survival was 47.5 months, after 36 months follow-up. Low grading, tumors ≥5 cm, multiple nodules and liver cirrhosis were predictors of decreased overall survival using multivariate analysis with hazard ratio(HR)=2.62, 2.41, 2.05, and 1.92 respectively. An estimated intra-operative blood loss of ≥1.2l was inversely correlated to disease free survival (HR=1.96). Stapler hepatectomy is a safe procedure in patients with HCC. Substantial intraoperative blood loss and the presence of cirrhosis independently predict the overall probability of patient survival. Intraoperative blood loss directly impacts HCC recurrence.

Optimal stapler cartridge selection according to the thickness of the pancreas in distal pancreatectomy

PubMed Central

Kim, Hongbeom; Jang, Jin-Young; Son, Donghee; Lee, Seungyeoun; Han, Youngmin; Shin, Yong Chan; Kim, Jae Ri; Kwon, Wooil; Kim, Sun-Whe

2016-01-01

Abstract Stapling is a popular method for stump closure in distal pancreatectomy (DP). However, research on which cartridges are suitable for different pancreatic thickness is lacking. To identify the optimal stapler cartridge choice in DP according to pancreatic thickness. From November 2011 to April 2015, data were prospectively collected from 217 consecutive patients who underwent DP with 3-layer endoscopic staple closure in Seoul National University Hospital, Korea. Postoperative pancreatic fistula (POPF) was graded according to International Study Group on Pancreatic Fistula definitions. Staplers were grouped based on closed length (CL) (Group I: CL ≤ 1.5 mm, II: 1.5 mm < CL < 2 mm, III: CL ≥ 2 mm). Compression ratio (CR) was defined as pancreas thickness/CL. Distribution of pancreatic thickness was used to find the cut-off point of thickness which predicts POPF according to stapler groups. POPF developed in 130 (59.9%) patients (Grade A; n = 86 [66.1%], B; n = 44 [33.8%]). The numbers in each stapler group were 46, 101, and 70, respectively. Mean thickness was higher in POPF cases (15.2 mm vs 13.5 mm, P = 0.002). High body mass index (P = 0.003), thick pancreas (P = 0.011), and high CR (P = 0.024) were independent risk factors for POPF in multivariate analysis. Pancreatic thickness was grouped into <12 mm, 12 to 17 mm, and >17 mm. With pancreatic thickness <12 mm, the POPF rate was lowest with Group II (I: 50%, II: 27.6%, III: 69.2%, P = 0.035). The optimal stapler cartridges with pancreatic thickness <12 mm were those in Group II (Gold, CL: 1.8 mm). There was no suitable cartridge for thicker pancreases. Further studies are necessary to reduce POPF in thick pancreases. PMID:27583852

Optimal stapler cartridge selection according to the thickness of the pancreas in distal pancreatectomy.

PubMed

Kim, Hongbeom; Jang, Jin-Young; Son, Donghee; Lee, Seungyeoun; Han, Youngmin; Shin, Yong Chan; Kim, Jae Ri; Kwon, Wooil; Kim, Sun-Whe

2016-08-01

Stapling is a popular method for stump closure in distal pancreatectomy (DP). However, research on which cartridges are suitable for different pancreatic thickness is lacking. To identify the optimal stapler cartridge choice in DP according to pancreatic thickness.From November 2011 to April 2015, data were prospectively collected from 217 consecutive patients who underwent DP with 3-layer endoscopic staple closure in Seoul National University Hospital, Korea. Postoperative pancreatic fistula (POPF) was graded according to International Study Group on Pancreatic Fistula definitions. Staplers were grouped based on closed length (CL) (Group I: CL ≤ 1.5 mm, II: 1.5 mm < CL < 2 mm, III: CL ≥ 2 mm). Compression ratio (CR) was defined as pancreas thickness/CL. Distribution of pancreatic thickness was used to find the cut-off point of thickness which predicts POPF according to stapler groups.POPF developed in 130 (59.9%) patients (Grade A; n = 86 [66.1%], B; n = 44 [33.8%]). The numbers in each stapler group were 46, 101, and 70, respectively. Mean thickness was higher in POPF cases (15.2 mm vs 13.5 mm, P = 0.002). High body mass index (P = 0.003), thick pancreas (P = 0.011), and high CR (P = 0.024) were independent risk factors for POPF in multivariate analysis. Pancreatic thickness was grouped into <12 mm, 12 to 17 mm, and >17 mm. With pancreatic thickness <12 mm, the POPF rate was lowest with Group II (I: 50%, II: 27.6%, III: 69.2%, P = 0.035).The optimal stapler cartridges with pancreatic thickness <12 mm were those in Group II (Gold, CL: 1.8 mm). There was no suitable cartridge for thicker pancreases. Further studies are necessary to reduce POPF in thick pancreases.

[Comparison of the application between circular stapler and linear stapler in Billroth II( anastomosis of distal gastrectomy].

PubMed

Zhang, Nan; Su, Xiangqian; Xu, Kai

2018-02-25

To compare the safety and effectiveness of circular stapler and linear stapler in Billroth II( anastomosis following distal gastrectomy for gastric cancer patients. Clinical data of gastric adenocarcinoma patients who received distal gastrectomy with Billroth II( anastomosis at Ward IIII( of Gastrointestinal Cancer Center of Peking University Cancer Hospital from January 2013 to April 2017 were collected retrospectively. (1) patients identified as stage IIII( gastric cancer by preoperative clinical and postoperative pathological staging. (2) patients undergoing emergency operation due to perforation, obstruction, or bleeding of digestive tract. (3) patients receiving chemotherapy before operation. (4) patients undergoing combined organ resection due to tumor involving other organs. (5) patients complicating with other malignancies. A total of 116 cases were enrolled and divided into circular stapler (CS, 61 cases) group and linear stapler (LS, 55 cases) group according to the application of mechanical stapler. Clinicopathological characteristics, operative conditions and postoperative recovery were compared between two groups. Differences in baseline data, such as tumor size, Lauren classification, differentiation grade, and pathologic stage, between two groups were not statistically significant (all P>0.05). The mean operative time (230 min vs. 234 min), median intra-operative blood loss (50.0 ml vs. 50.0 ml), median number of harvested lymph node (28.0 vs. 26.0) and median number of positive lymph node (1.0 vs. 2.0) between LS group and CS group were not significantly different (all P>0.05) As compared to CS group, LS group presented shorter median time to the first flatus (3.0 days vs. 4.0 days, P=0.038), shorter median time to the first liquid diet (7.0 days vs. 8.0 days, P=0.000), shorter median time to remove the first abdominal drainage tube (7.0 days vs. 9.0 days, P=0.000) and shorter median time of postoperative hospital stay (8.0 days vs. 10.0 days, P=0.000). The morbidity of postoperative complication was 11.5% and 1.8% in CS group and LS group respectively without significant difference (P=0.092). In CS group, 1 case (1.6%) developed anastomotic hemorrhage, 3 cases (4.9%) gastric emptying disorder and 3 cases (4.9%) abdominal infection after operation, who all were cured by conservative treatment without duodenal stump fistula and re-operation. In LS group, only 1 case (1.8%) developed duodenal stump fistula and was cured by re-operation. In distal gastrectomy with Billroth II( anastomosis for gastric cancer, the application of linear stapler results in faster recovery of gastrointestinal function and shorter hospital stay, indicating more advantages.

(Video Assisted) thoracoscopic surgery: Getting started

PubMed Central

Molnar, Tamas F

2007-01-01

Thoracoscopic surgery without or with video assistance (VATS) is simpler and easier to learn as it seems to be. Potential benefits of the procedure in rural surgical environment are outlined while basic requirements and limitations are listed. Thoracoscopy kit, thoracotomy tray at hand, patient monitoring, proper drainage system, pain control and access to chest physiotherapy are the basic requirements. Having headlight, bronchoscope, Ligasure and mechanical staplers offer clear advantages but they are not indispensable. Exploration and evacuation of pleural space, pleurodesis, surgery for Stage I and II thoracic empyema are evidenced fields of VATS procedures. Some of the cases can be performed under controlled local anesthesia. Acute chest trauma cannot be recommended for VATS treatment. Lung cancer is out of the scope of rural surgery. PMID:19789679

[Manual suture versus/or mechanical suture from the Austrian viewpoint].

PubMed

Kronberger, L; Germann, R

1987-01-01

A general inquiry was made at surgical units and university clinics in Austria about the anastomosis techniques used between 1980 to 1985. The result was that in 90.3% the suture was made by hand and in 9.7% by machine. The first mentioned was performed as double row inverting suture by 66% of our surgeons, and only in 30% as an all-layer suture. The stapler-technique was mostly preferred for the oesophago-jejunostomy and the high and lower resection of the rectum. A leakage of the suture line was observed in 3.9% after sewing by hand and in 6.3% after stapling. The total lethality finally was 1.4% for hand made suture and 1.8% for apparative suture.

Intracorporeal reconstruction after laparoscopic pylorus-preserving gastrectomy for middle-third early gastric cancer: a hybrid technique using linear stapler and manual suturing.

PubMed

Koeda, Keisuke; Chiba, Takehiro; Noda, Hironobu; Nishinari, Yutaka; Segawa, Takenori; Akiyama, Yuji; Iwaya, Takeshi; Nishizuka, Satoshi; Nitta, Hiroyuki; Otsuka, Koki; Sasaki, Akira

2016-05-01

Laparoscopy-assisted pylorus-preserving gastrectomy has been increasingly reported as a treatment for early gastric cancer located in the middle third of the stomach because of its low invasiveness and preservation of pyloric function. Advantages of a totally laparoscopic approach to distal gastrectomy, including small wound size, minimal invasiveness, and safe anastomosis, have been recently reported. Here, we introduce a new procedure for intracorporeal gastro-gastrostomy combined with totally laparoscopic pylorus-preserving gastrectomy (TLPPG). The stomach is transected after sufficient lymphadenectomy with preservation of infrapyloric vessels and vagal nerves. The proximal stomach is first transected near the Demel line, and the distal side is transected 4 to 5 cm from the pyloric ring. To create end-to-end gastro-gastrostomy, the posterior wall of the anastomosis is stapled with a linear stapler and the anterior wall is made by manual suturing intracorporeally. We retrospectively assessed the postoperative surgical outcomes via medical records. The primary endpoint in the present study is safety. Sixteen patients underwent TLPPG with intracorporeal reconstruction. All procedures were successfully performed without any intraoperative complications. The mean operative time was 275 min, with mean blood loss of 21 g. With the exception of one patient who had gastric stasis, 15 patients were discharged uneventfully between postoperative days 8 and 11. Our novel hybrid technique for totally intracorporeal end-to-end anastomosis was performed safely without mini-laparotomy. This technique requires prospective validation.

Quantifying innovation in surgery.

PubMed

Hughes-Hallett, Archie; Mayer, Erik K; Marcus, Hani J; Cundy, Thomas P; Pratt, Philip J; Parston, Greg; Vale, Justin A; Darzi, Ara W

2014-08-01

The objectives of this study were to assess the applicability of patents and publications as metrics of surgical technology and innovation; evaluate the historical relationship between patents and publications; develop a methodology that can be used to determine the rate of innovation growth in any given health care technology. The study of health care innovation represents an emerging academic field, yet it is limited by a lack of valid scientific methods for quantitative analysis. This article explores and cross-validates 2 innovation metrics using surgical technology as an exemplar. Electronic patenting databases and the MEDLINE database were searched between 1980 and 2010 for "surgeon" OR "surgical" OR "surgery." Resulting patent codes were grouped into technology clusters. Growth curves were plotted for these technology clusters to establish the rate and characteristics of growth. The initial search retrieved 52,046 patents and 1,801,075 publications. The top performing technology cluster of the last 30 years was minimally invasive surgery. Robotic surgery, surgical staplers, and image guidance were the most emergent technology clusters. When examining the growth curves for these clusters they were found to follow an S-shaped pattern of growth, with the emergent technologies lying on the exponential phases of their respective growth curves. In addition, publication and patent counts were closely correlated in areas of technology expansion. This article demonstrates the utility of publically available patent and publication data to quantify innovations within surgical technology and proposes a novel methodology for assessing and forecasting areas of technological innovation.

Use of 3D printer technology to facilitate surgical correction of a complex vascular anomaly with esophageal entrapment in a dog.

PubMed

Dundie, A; Hayes, G; Scrivani, P; Campoy, L; Fletcher, D; Ash, K; Oxford, E; Moïse, N S

2017-04-01

A 10 week old female intact Staffordshire terrier was presented with a total of five congenital cardio-thoracic vascular anomalies consisting of a patent ductus arteriosus (PDA) with an aneurysmic dilation, pulmonic stenosis, persistent right aortic arch, aberrant left subclavian artery and persistent left cranial vena cava. These abnormalities were identified with a combination of echocardiogram and computed tomography angiography (CTA). The abnormalities were associated with esophageal entrapment, regurgitation, and volume overload of the left heart with left atrial and ventricular enlargement. A 2 cm diameter aneurysmic dilation at the junction of the PDA, right aortic arch and aberrant left subclavian artery presented an unusual surgical challenge and precluded simple circumferential ligation and transection of the structure. A full scale three dimensional model of the heart and vasculature was constructed from the CTA and plasma sterilized. The model was used preoperatively to facilitate surgical planning and enhance intraoperative communication and coordination between the surgical and anesthesia teams. Intraoperatively the model facilitated spatial orientation, atraumatic vascular dissection, instrument sizing and positioning. A thoracoabdominal stapler was used to close the PDA aneurysm prior to transection. At the four-month postoperative follow-up the patient was doing well. This is the first reported application of new imaging and modeling technology to enhance surgical planning when approaching correction of complex cardiovascular anomalies in a dog. Copyright © 2016 Elsevier B.V. All rights reserved.

Improved access and visibility during stapling of the ultra-low rectum: a comparative human cadaver study between two curved staplers

PubMed Central

2012-01-01

Background The purpose of this study was to compare in human cadavers the applicability of a commonly used stapling device, the CONTOUR® curved cutter (CC) (Ethicon Endo-Surgery, Cincinnati, OH) to a newly released, curved stapler, the Endo GIA™ Radial Reload with Tri-Staple™ Technology (RR) (Covidien, New Haven, CT) Methods Four experienced surgeons performed deep pelvic dissection with total mesorectal excision (TME) of the rectum in twelve randomized male cadavers. Both stapling devices were applied to the ultra-low rectum in coronal and sagittal configurations. Extensive measurements were recorded of anatomic landmarks for each cadaver pelvis along with various aspects of access, visibility, and ease of placement for each device. Results The RR reached significantly lower into the pelvis in both the coronal and sagittal positions compared to the CC. The median distance from the pelvic floor was 1.0 cm compared to 2.0 cm in the coronal position, and 1.0 cm versus 3.3 cm placed sagitally, p < 0.0001. Surgeons gave a higher visibility rating with less visual impediment in the sagittal plane using the RR Stapler. Impediment of visibility occurred in only 10% (5/48) of RR applications in the coronal position, compared to a rate of 48% (23/48) using the CC, p = 0.0002. Conclusions The RR device performed significantly better when compared to the CC stapler in regards to placing the stapler further into the deep pelvis and closer to the pelvic floor, while causing less obstructing of visualization. PMID:23148602

Pancreatic stump closure using only stapler is associated with high postoperative fistula rate after minimal invasive surgery.

PubMed

Yüksel, Adem; Bostancı, Erdal Birol; Çolakoğlu, Muhammet Kadri; Ulaş, Murat; Özer, İlter; Karaman, Kerem; Akoğlu, Musa

2018-03-01

Postoperative pancreatic fistula (POPF) is the most common cause of morbidity and mortality after distal pancreatectomy (DP). The aim of the present study is to determine the risk factors that can lead to POPF. The study was conducted between January 2008 and December 2012. A total of 96 patients who underwent DP were retrospectively analyzed. Overall, 24 patients (25%) underwent laparoscopic distal pancreatectomy (LDP) and 72 patients (75%) open surgery. The overall morbidity rate was 51% (49/96). POPF (32/96, 33.3%) was the most common postoperative complication. Grade B fistula (18/32, 56.2%) was the most common fistula type according to the International Study Group on Pancreatic Fistula definition. POPF rate was significantly higher in the minimally invasive surgery group (50%, p=0.046). POPF rate was 58.6% (17/29) in patients whose pancreatic stump closure was performed with only stapler, whereas POPF rate was 3.6% (1/28) in the group where the stump was closed with stapler plus oversewing sutures. Both minimally invasive surgery (OR: 0.286, 95% CI: 0.106-0.776, p=0.014) and intraoperative blood transfusion (OR: 4.210, 95% CI: 1.155-15.354, p=0.029) were detected as independent risk factors for POPF in multi-variety analysis. LDP is associated with a higher risk of POPF when stump closure is performed with only staplers. Intraoperative blood transfusion is another risk factor for POPF. On the other hand, oversewing sutures to the stapler line reduces the risk of POPF.

Thoracoscopic anatomical subsegmentectomy of the right S2b + S3 using a 3D printing model with rapid prototyping.

PubMed

Nakada, Takeo; Akiba, Tadashi; Inagaki, Takuya; Morikawa, Toshiaki

2014-10-01

Thoracoscopic segmentectomies and subsegmentectomies are more difficult than lobectomy because of the complexity of the procedure; therefore, preoperative decision-making and surgical procedure planning are essential. In the literature, we could successfully perform thoracoscopic anatomical subsegmentectomy of the right S2b + S3 using a 3D printing model with rapid prototyping. This innovative surgical support model is extremely useful for planning a surgical procedure and identifying the surgical margin. © The Author 2014. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Postoperative complications linked to pancreaticoduodenectomy. An analysis of pancreatic stump management.

PubMed

Benzoni, Enrico; Zompicchiatti, Aron; Saccomano, Enrico; Lorenzin, Dario; Baccarani, Umberto; Adani, Gianluigi; Noce, Luigi; Uzzau, Alessandro; Cedolini, Carla; Bresadola, Fabrizio; Intini, Sergio

2008-03-01

To analyze the role of different procedures in the management of pancreatic stump according to the incidence of postoperative morbidity derived from the data of a single center surgical population. From 1989 to 2005 we performed 76 pancreaticoduodenectomies (PD) and 26 distal pancreatectomies (DP). The surgical reconstruction after PD was as follows: 11 manual non-absorbable stitches closure of the main duct, 24 closures of the main duct with linear stapler, 17 occlusions of the main duct with neoprene glue and 24 duct-to-mucosa anastomosis. In the PD group, the morbidity rate was 60%, caused by: pancreatic leakage in 48% of patients, hemorrhagic complications in 10% following surgical procedure and infectious complications in 15%. After DP we recorded: leakage in 3.9%, haemoperitoneum in 15.4% and no complications in 80.7%. The multivariate analysis showed that the in-hospital mortality was linked to the surgical procedure (PD, p=0.003) and to the following complications: pancreatic leakage (p=0.004), haemoperitoneum (p=0.00045) and infectious complications (p=0.0077). Bleeding complications, biliary anastomosis leakage and infectious complications were consequences of pancreatic leakage (p=0.025, p=0.025 and p=0.025 respectively). Manual non-absorbable stitch closure of the main duct and occlusion of the main duct with neoprene glue should be avoided in the reconstructive phase.

Comparative Study of Hand-Sutured versus Circular Stapled Anastomosis for Gastrojejunostomy in Laparoscopy Assisted Distal Gastrectomy

PubMed Central

Seo, Su Hyun; Kim, Min Chan; Choi, Hong Jo; Jung, Ghap Joong

2012-01-01

Purpose Mechanical stapler is regarded as a good alternative to the hand sewing technique, when used in gastric reconstruction. The circular stapling method has been widely applied to gastrectomy (open orlaparoscopic), for gastric cancer. We illustrated and compared the hand-sutured method to the circular stapling method, for Billroth-II, in patients who underwent laparoscopy assisted distal gastrectomy for gastric cancer. Materials and Methods Between April 2009 and May 2011, 60 patients who underwent laparoscopy assisted distal gastrectomy, with Billroth-II, were enrolled. Hand-sutured Billroth-II was performed in 40 patients (manual group) and circular stapler Billroth-II was performed in 20 patients (stapler group). Clinicopathological features and post-operative outcomes were evaluated and compared between the two groups. Results Nosignificant differences were observed in clinicopathologic parameters and post-operative outcomes, except in the operation times. Operation times and anastomosis times were significantly shorter in the stapler group (P=0.004 and P<0.001). Conclusions Compared to the hand-sutured method, the circular stapling method can be applied safely and more efficiently, when performing Billroth-II anastomosis, after laparoscopy assisted distal gastrectomy in patients with gastric cancer. PMID:22792525

Optimization in multi-implant placement for immediate loading in edentulous arches using a modified surgical template and prototyping: a case report.

PubMed

Jayme, Sérgio J; Muglia, Valdir A; de Oliveira, Rafael R; Novaes, Arthur B Júnior

2008-01-01

Immediate loading of dental implants shortens the treatment time and makes it possible to give the patient an esthetic appearance throughout the treatment period. Placement of dental implants requires precise planning that accounts for anatomic limitations and restorative goals. Diagnosis can be made with the assistance of computerized tomographic scanning, but transfer of planning to the surgical field is limited. Recently, novel CAD/CAM techniques such as stereolithographic rapid prototyping have been developed to build surgical guides in an attempt to improve precision of implant placement. The aim of this case report was to show a modified surgical template used throughout implant placement as an alternative to a conventional surgical guide.

Prosthetically directed implant placement using computer software to ensure precise placement and predictable prosthetic outcomes. Part 2: rapid-prototype medical modeling and stereolithographic drilling guides requiring bone exposure.

PubMed

Rosenfeld, Alan L; Mandelaris, George A; Tardieu, Philippe B

2006-08-01

The purpose of this paper is to expand on part 1 of this series (published in the previous issue) regarding the emerging future of computer-guided implant dentistry. This article will introduce the concept of rapid-prototype medical modeling as well as describe the utilization and fabrication of computer-generated surgical drilling guides used during implant surgery. The placement of dental implants has traditionally been an intuitive process, whereby the surgeon relies on mental navigation to achieve optimal implant positioning. Through rapid-prototype medical modeling and the ste-reolithographic process, surgical drilling guides (eg, SurgiGuide) can be created. These guides are generated from a surgical implant plan created with a computer software system that incorporates all relevant prosthetic information from which the surgical plan is developed. The utilization of computer-generated planning and stereolithographically generated surgical drilling guides embraces the concept of collaborative accountability and supersedes traditional mental navigation on all levels of implant therapy.

Observation of a novel stapler band in 75As

NASA Astrophysics Data System (ADS)

Li, C. G.; Chen, Q. B.; Zhang, S. Q.; Xu, C.; Hua, H.; Li, X. Q.; Wu, X. G.; Hu, S. P.; Meng, J.; Xu, F. R.; Liang, W. Y.; Li, Z. H.; Ye, Y. L.; Jiang, D. X.; Sun, J. J.; Han, R.; Niu, C. Y.; Chen, X. C.; Li, P. J.; Wang, C. G.; Wu, H. Y.; Li, G. S.; He, C. Y.; Zheng, Y.; Li, C. B.; Chen, Q. M.; Zhong, J.; Zhou, W. K.

2017-03-01

The heavy ion fusion-evaporation reaction study for the high-spin spectroscopy of 75As has been performed via the reaction channel 70Zn(9Be, 1p3n)75As at a beam energy of 42 MeV. The collective structure especially a dipole band in 75As is established for the first time. The properties of this dipole band are investigated in terms of the self-consistent tilted axis cranking covariant density functional theory. Based on the theoretical description and the examination of the angular momentum components, this dipole band can be interpreted as a novel stapler band, where the valence neutrons in (1g9/2) orbital rather than the collective core are responsible for the closing of the stapler of angular momentum.

Assessment of MRI issues at 3-Tesla for metallic surgical implants: findings applied to 61 additional skin closure staples and vessel ligation clips.

PubMed

Gill, Amreeta; Shellock, Frank G

2012-01-09

Metallic skin closure staples and vessel ligation clips should be tested at 3-Tesla to characterize MRI issues in order to ensure patient safety. Therefore, metallic surgical implants were assessed at 3-Tesla for magnetic field interactions, MRI-related heating, and artifacts. A skin closure staple (Visistat Skin Stapler, staple, Polytetrafluoroethylene, PTFE, coated 316L/316LVM stainless steel; Teleflex Medical, Durham, NC) and a vessel ligation clip (Hemoclip Traditional, stainless steel; Teleflex Medical, Durham, NC) that represented the largest metallic sizes made from materials with the highest magnetic susceptibilities (i.e., based on material information) among 61 other surgical implants (52 metallic implants, 9 nonmetallic implants) underwent evaluation for magnetic field interactions, MRI-related heating, and artifacts using standardized techniques. MRI-related heating was assessed by placing each implant in a gelled-saline-filled phantom with MRI performed using a transmit/receive RF body coil at an MR system reported, whole body averaged SAR of 2.9-W/kg for 15-min. Artifacts were characterized using T1-weighted, SE and GRE pulse sequences. Each surgical implant showed minor magnetic field interactions (20- and 27-degrees, which is acceptable from a safety consideration). Heating was not substantial (highest temperature change, ≤ 1.6°C). Artifacts may create issues if the area of interest is in the same area or close to the respective surgical implant. The results demonstrated that it would be acceptable for patients with these metallic surgical implants to undergo MRI at 3-Tesla or less. Because of the materials and dimensions of the surgical implants that underwent testing, these findings pertain to 61 additional similar implants.

Assessment of MRI issues at 3-Tesla for metallic surgical implants: findings applied to 61 additional skin closure staples and vessel ligation clips

PubMed Central

2012-01-01

Purpose Metallic skin closure staples and vessel ligation clips should be tested at 3-Tesla to characterize MRI issues in order to ensure patient safety. Therefore, metallic surgical implants were assessed at 3-Tesla for magnetic field interactions, MRI-related heating, and artifacts. Methods A skin closure staple (Visistat Skin Stapler, staple, Polytetrafluoroethylene, PTFE, coated 316L/316LVM stainless steel; Teleflex Medical, Durham, NC) and a vessel ligation clip (Hemoclip Traditional, stainless steel; Teleflex Medical, Durham, NC) that represented the largest metallic sizes made from materials with the highest magnetic susceptibilities (i.e., based on material information) among 61 other surgical implants (52 metallic implants, 9 nonmetallic implants) underwent evaluation for magnetic field interactions, MRI-related heating, and artifacts using standardized techniques. MRI-related heating was assessed by placing each implant in a gelled-saline-filled phantom with MRI performed using a transmit/receive RF body coil at an MR system reported, whole body averaged SAR of 2.9-W/kg for 15-min. Artifacts were characterized using T1-weighted, SE and GRE pulse sequences. Results Each surgical implant showed minor magnetic field interactions (20- and 27-degrees, which is acceptable from a safety consideration). Heating was not substantial (highest temperature change, ≤ 1.6°C). Artifacts may create issues if the area of interest is in the same area or close to the respective surgical implant. Conclusions The results demonstrated that it would be acceptable for patients with these metallic surgical implants to undergo MRI at 3-Tesla or less. Because of the materials and dimensions of the surgical implants that underwent testing, these findings pertain to 61 additional similar implants. PMID:22230200

[Cancer of the colorectum in the aged. Clinical considerations with reference to our case series of 65 operated cases during the triennial, 1984-1986].

PubMed

De Fabritiis, G; Pirazzoli, G; Seracchioli, S; Tuci, C; Pavanello, P M

1989-05-31

Starting from the note that in industrialised countries colorectal tumours are an increasingly serious problem, especially in the elderly, and after some epidemiological remarks, a personal series of 65 consecutive operations on over--70s in a three-year period is considered. Personal statistics are analysed following careful assessment of risk factors and the immediate and long-term surgical results, also examined on the basis of reported data. It is noted, first, that age is never an absolute contraindication to surgery; second that early diagnosis is basic for the achievement of an improved prognosis: proof of this lies in the excessive number of emergency operations for occlusion or perforation. On the other hand, while it is true that extreme radicalism at an advanced stage does not imply any substantial modification to prognosis, it should also be recognised that the shortening of surgical times (after the introduction of mechanical staplers and the improvement in anaesthesiological assistance techniques) offer greater scope for manoeuvre.

Pelvic flexure enterotomy closure in the horse with a TA-90 stapling device: A retrospective clinical study of 84 cases (2001–2008)

PubMed Central

Rosser, Julie; Brounts, Sabrina; Slone, Don; Lynch, Tim; Livesey, Michael; Hughes, Faith; Clark, Carol

2012-01-01

Our objective was to compare survival and complication rates of horses undergoing pelvic flexure enterotomy closure with a TA-90 stapler to those with hand-sewn closure. Medical records of horses undergoing pelvic flexure enterotomy between 2001 and 2008 were reviewed. History, clinical signs, surgical findings, surgical techniques, and post-operative complications were recorded. Long-term outcome was established by telephone questionnaire. Of 84 pelvic flexure enterotomies performed, 70 were stapled and 14 were hand-sewn. Seventy-seven horses survived to discharge (91.7%). There were no significant associations between survival and closure technique (P = 0.69). Follow-up was available for 54 horses; 50 survived long-term (93.0%). No statistical significance was identified between long-term survival and closure method (P = 0.39). Forty horses went on to athletic performance (80.0%). TA-90 stapled closure of pelvic flexure enterotomies is a safe technique resulting in survival and complication rates equivalent to those of hand-sewn closure. PMID:23204584

Unisurgeon’ uniportal video-assisted thoracoscopic surgery lobectomy

PubMed Central

2017-01-01

The video-assisted thoracoscopic surgery (VATS) for major pulmonary resections has evolved in a period of only 7 years from 3–4 incisions to a single incision approach. However, Uniportal VATS approach is different from other forms of minimally invasive thoracic surgery, and the technique of lung exposure and stapler insertion through a single hole should be learned step by step. The main advances of uniportal VATS during the last years are related to improvements in surgical technique, evolving to a concept of “advanced VATS instrumentation”, and implementation of new technology. One recent advance in uniportal VATS is the possibility of using a robotic or pneumatic articulated arm that holds the camera stable and no needs a surgical assistant. This is called “unisurgeon uniportal VATS” in where the surgeon has more freedom of movements and eliminates the fatigue of assistant holding the camera. We are still in the beginning of the “unisurgeon era” that probably will be more popular in the next coming years thanks to the Implementation of wireless cameras and graspers by means of magnetic control. PMID:29302439

[Mechanical suture in classic and laparoscopic general surgery].

PubMed

Alecu, L; Pascu, A; Deacu, A; Corodeanu, G; Marin, A; Costan, I

2000-01-01

Of this working is the study of employment the mechanical suture in general surgery classic and laparoscopic. We analysed the possibility of accomplishment and postoperatory evolution of 104 mechanical sutures performed in 24 patients, with diverse surgery pathology, operated in Department of General Surgery, between January 1999 and January 2000. Mechanical sutures allowed us to minimize the duration of surgical interventions and to perform some difficult anastomotic assembles (sometimes including creation of organ substitute). We had only two postoperatory fistulas and two postoperatory haemorrhages from anastomotic area (both cases because of bad closing of clips, through tissue excess between anvil and cartridge of the stapler). There are certain advantages in using mechanical sutures (versus manual sutures) consisting in decreasing of time period, both in operation itself and in hospitalization, despite their high level cost.

Reconstruction of the gastric passage by a side-to-side gastrogastrostomy after failed vertical-banded gastroplasty: a case report

PubMed Central

Soll, Christopher; Müller, Markus K; Wildi, Stefan; Clavien, Pierre-Alain; Weber, Markus

2008-01-01

Introduction Vertical-banded gastroplasty, a technique that is commonly performed in the treatment of morbid obesity, represents a nonadjustable restrictive procedure which reduces the volume of the upper stomach by a vertical stapler line. In addition, a textile or silicone band restricts food passage through the stomach. Case presentation A 71-year-old woman presented with a severe gastric stenosis 11 years after vertical gastroplasty. We describe a side-to-side gastrogastrostomy as a safe surgical procedure to restore the physiological gastric passage after failed vertical-banded gastroplasty. Conclusion Occasionally, restrictive procedures for morbid obesity cannot be converted into an alternative bariatric procedure to maintain weight control. This report demonstrates that a side-to-side gastrogastrostomy is a feasible and safe procedure. PMID:18513454

Usefulness of computed tomography in pre-surgical evaluation of maxillo-facial pathology with rapid prototyping and surgical pre-planning by virtual reality.

PubMed

Toso, Francesco; Zuiani, Chiara; Vergendo, Maurizio; Salvo, Iolanda; Robiony, Massimo; Politi, Massimo; Bazzocchi, Massimo

2005-01-01

To validate a protocol for creating virtual models to be used in the construction of solid prototypes useful for the planning-simulation of maxillo-facial surgery, in particular for very complex anatomic and pathologic problems. To optimize communications between the radiology, engineering and surgical laboratories. We studied 16 patients with different clinical problems of the maxillo-facial district. Exams were performed with multidetector computed tomography (MDCT) and single slice computed tomography (SDCT) with axial scans and collimation of 0.5-2 mm, and reconstruction interval of 1 mm. Subsequently we performed 2D multiplanar reconstructions and 3D volume-rendering reconstructions. We exported the DICOM images to the engineering laboratory, to recognize and isolate the bony structures by software. With these data the solid prototypes were generated using stereolitography. To date, surgery has been preformed on 12 patients after simulation of the procedure on the stereolithographyc model. The solid prototypes constructed in the difficult cases were sufficiently detailed despite problems related to the artefacts generated by dental fillings an d prostheses. In the remaining cases the MPR/3D images were sufficiently detailed for surgical planning. The surgical results were excellent in all patients who underwent surgery, and the surgeons were satisfied with the improvement in quality and the reduction in time required for the procedure. MDCT enables rapid prototyping using solid replication, which was very helpful in maxillo-facial surgery, despite problems related to artifacts due to dental fillings and prosthesis within the acquisition field; solutions for this problem are work in progress. The protocol used for communication between the different laboratories was valid and reproducible.

Three-dimensional-printed cardiac prototypes aid surgical decision-making and preoperative planning in selected cases of complex congenital heart diseases: Early experience and proof of concept in a resource-limited environment.

PubMed

Kappanayil, Mahesh; Koneti, Nageshwara Rao; Kannan, Rajesh R; Kottayil, Brijesh P; Kumar, Krishna

2017-01-01

Three-dimensional. (3D) printing is an innovative manufacturing process that allows computer-assisted conversion of 3D imaging data into physical "printouts" Healthcare applications are currently in evolution. The objective of this study was to explore the feasibility and impact of using patient-specific 3D-printed cardiac prototypes derived from high-resolution medical imaging data (cardiac magnetic resonance imaging/computed tomography [MRI/CT]) on surgical decision-making and preoperative planning in selected cases of complex congenital heart diseases (CHDs). Five patients with complex CHD with previously unresolved management decisions were chosen. These included two patients with complex double-outlet right ventricle, two patients with criss-cross atrioventricular connections, and one patient with congenitally corrected transposition of great arteries with pulmonary atresia. Cardiac MRI was done for all patients, cardiac CT for one; specific surgical challenges were identified. Volumetric data were used to generate patient-specific 3D models. All cases were reviewed along with their 3D models, and the impact on surgical decision-making and preoperative planning was assessed. Accurate life-sized 3D cardiac prototypes were successfully created for all patients. The models enabled radically improved 3D understanding of anatomy, identification of specific technical challenges, and precise surgical planning. Augmentation of existing clinical and imaging data by 3D prototypes allowed successful execution of complex surgeries for all five patients, in accordance with the preoperative planning. 3D-printed cardiac prototypes can radically assist decision-making, planning, and safe execution of complex congenital heart surgery by improving understanding of 3D anatomy and allowing anticipation of technical challenges.

Surgical treatment of haemorrhoidal disease – the current situation in Poland

PubMed Central

Dziki, Lukasz; Trzcinski, Radzislaw; Buczynski, Jaroslaw; Kreisel, Anna; Skoneczny, Mariusz; Dziki, Adam

2016-01-01

Introduction In cases of haemorrhoidal disease resistant to conservative treatment, surgical treatment is necessary to relieve the symptoms. Aim To investigate the current methods used by Polish surgeons. Material and methods Surveys were distributed to members of the Association of Polish Surgeons (APS), in which participants were asked a number of closed-ended questions regarding haemorrhoidal disease and the way they treated suffering patients Results Out of the 1523 members of APS who received questionnaires, responses were received from 807 (52.9%) members. The Milligan-Morgan technique was indicated by 72.5% of surgeons as a leading surgical treatment, followed by Ligasure (15.5%), Ferguson (3.5%), DGHL (3.5%), other methods (3.5%), Parks (1.7%), and Longo (0%). The majority of participants (93%) indicated from 0 to 1 life threatening complications, 5% – from 2 to 3, and 2% > 4. A total of 83% of participants use a single dose of antibiotics prior to surgery. Conclusions The Milligan-Morgan technique is the preferred method. The majority of procedures are performed in regional hospitals and university departments, and less commonly in private practices. The vast majority of surgeons in Poland are not convinced about the stapler technique, justifying this fact with the possibility of developing serious complications PMID:27350838

The effect of three different surgical techniques for colon anastomosis on regional postoperative microperfusion: Laser Doppler Flowmetry study in pigs.

PubMed

Kaska, Milan; Blazej, Slavomir; Turek, Zdenek; Ryska, Ales; Jegorov, Boris; Radochova, Vera; Bezouska, Jan; Paral, Jiri

2018-01-01

The optimal surgical approach to reconnecting bowel ends safely after resection is of great importance. This project is focused on assessment of the perianastomotic microcirculation quality in the short postoperative period when using three different anastomosis techniques in experimental animal. The experimental study involved 27 young female domestic pigs divided into three subgroups of 9 animals according to each surgical method of anastomosis construction in the sigmoid colon region: by manual suture, by stapler, or by gluing. Blood microcirculation in the anastomosis region was monitored using Laser Doppler Flowmetry (LDF). Anastomosis healing was evaluated by macroscopic and histological examination. Evaluation of the microcirculation in the anastomosis region showed the smallest decrease in perfusion values in animals reconstructed by suturing (Δ= -38.01%). A significantly more profound drop was observed postoperatively after stapling or gluing (Δ= -52.42% and Δ= -59.53%, respectively). All performed anastomoses healed without any signs of tissue and function pathology. Sewing, stapling, and gluing techniques for bowel anastomosis each have a different effect on regional microcirculation during 120 min. postoperatively. Nevertheless, the final results of anastomosis healing were found without of any pathology in all experimental animals managed by above mentioned anastomotic techniques.

Clinical application of layered anastomosis during esophagogastrostomy.

PubMed

Zhu, Zi-Jiang; Zhao, Yong-Fan; Chen, Long-Qi; Hu, Yang; Liu, Lun-Xu; Wang, Yun; Kou, Ying-Li

2008-04-01

The aim of this study was to compare the operative results in regard to reducing anastomotic leakage and stricture formation using a newly designed layered manual esophagogastric anastomosis versus a stapler esophagogastrostomy versus the conventional hand-sewn whole-layer anastomosis after resection for esophageal or gastric cardiac carcinoma. From January 2004 to September 2006, a total of 1024 patients with esophageal or gastric cardia carcinoma underwent a layered esophagogastric anastomosis with the assistance of a three-leaf clipper in a single university medical center. The mucosal layers of the esophagus and stomach were sutured continuously with 4/0 Vicryl plus antibacterial suture (polyglyconate). From May 2002 to December 2003, there were also 170 patients and 69 patients who underwent stapler and conventional whole-layer anastomosis, respectively; they served as control groups. The results were analyzed retrospectively. The operative mortality rate was 0.7% in the layered group compared to 5.9% and 7.2% for the stapler group and the whole-layer group (p < 0.01), The anastomotic leakage rates were 0%, 3.5%, and 5.8% for the layered group, stapler group, and whole-layer group, respectively (p < 0.01). All patients were followed postoperatively. Six patients in the layered group (0.6%) developed mild stricture formation compared to 16 patients in stapled group (9.9%) and 5 patients in the conventional whole-layer group (7.8%) (p < 0.01). The application of layered esophagogastric anastomosis could reduce the incidence of anastomotic leakage and stricture after esophagectomy compared with the stapler and whole-layer manual anastomoses. It is easy to apply and could be used as an alternative for esophagogastric anastomosis after resection for esophageal or cardiac carcinoma.

Outcomes after aortic graft-to-graft anastomosis with an automated circular stapler: A novel approach.

PubMed

Idrees, Jay J; Yazdchi, Farhang; Soltesz, Edward G; Vekstein, Andrew M; Rodriguez, Christopher; Roselli, Eric E

2016-10-01

Patients with complex aortic disease often require multistaged repairs with numerous anastomoses. Manual suturing can be time consuming. To reduce ischemic time, a circular stapling device has been used to facilitate prosthetic graft-to-graft anastomoses. Objectives are to describe this technique and assess outcomes. From February 2009 to May 2014, 44 patients underwent complex aortic repair with a circular end-to-end anastomosis (EEA) stapler at Cleveland Clinic. All patients had extensive aneurysms: 17 after ascending dissection repair, 10 chronic type B dissections, and 17 degenerative aneurysms. Stapler was used during total arch repair as an end-to-side anastomosis (n = 36; including first stage elephant trunk [ET] in 32, frozen ET in 3) and an end-to-end anastomosis during redo thoracoabdominal repair (n = 11). Three patients had the stapler used during both stages of repair. Patients underwent early and annual follow-ups with computed tomography analysis. There were no bleeds, ruptures, or leaks at the stapled site, but 2 patients died. Complications included 7 reoperations not related to the site of stapled anastomosis and 6 tracheostomies, but there was no paralysis or renal failure. Mean circulatory arrest time was 16 ± 5 minutes. Mean follow-up was 26 ± 17 months and consisted of imaging before discharge, at 3 to 6 months, and at 1 year. Planned reinterventions included 21 second-stage ET completion: Endovascular (n = 18) and open (n = 3). There were 4 late deaths. Use of an end-to-end anastomotic automated circular stapler is safe, effective, and durable in performing graft-to-graft anastomoses during complex thoracic aortic surgery. Further evaluation and refinement of this technique are warranted. Copyright © 2016 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

[Manual and mechanic anastomosis. Comparison in oncologic surgery of the colon and rectum].

PubMed

Piccolomini, A; Bruttini, S; Di Cosmo, L; Carli, A F; Guarnieri, A; Mariani, L; Carli, A

1990-03-15

Personal experience in the treatment of 60 cases of cancer of the large bowel with left hemicolon and rectal localisation is reported. 20 manual double layer anastomoses (group I), 20 single layer (group II) and with mechanical stapler (EEA stapler) (group III) were carried out in consecutive series. The results are reported in terms of early local and general complications: specifically 13 cases of anastomotic dehiscence of which 69.2% were observed in group I, 15.4% in group II and 15.4% in group III. Total postoperative mortality was 5%, average hospitalisation was as follows: 19 days group I, 14 days group II, 17 days group III. The value of single layer anastomoses, which is comparable to results with the stapler whose use is essential in cases of real manual technical difficulty, is stressed.

The Analysis and Development of a Mechanical Breadboard Structure

DTIC Science & Technology

2006-12-01

a George Foreman© grill, a garage door opener, a smoothie blender, and a heavy duty stapler. The customer needs for each product and their...cordless drill, a smoothie blender, a small George Foreman© grill, a garage door opener, and heavy duty stapler. The cordless drill and smoothie ...individually. Table 6: Sample Products and Mechanical Areas Product George Foreman Grill Cordless Drill Garage Door Opener Smoothie Blender

Laparoscopic management of interstitial pregnancy with automatic stapler

PubMed Central

Ahsan Akhtar, Muhammad; Izzat, Feras; Keay, Stephen D

2012-01-01

A 36-year-old woman was referred by general practitioner to the early pregnancy unit with pelvic pain in her seventh week of pregnancy. She had a transvaginal ultrasound. Unruptured live twin tubal ectopic pregnancy was diagnosed on. Diagnostic laparoscopy revealed an unruptured left interstitial ectopic pregnancy. The interstitial tubal pregnancy was removed by laparoscopic automatic stapler with minimal blood loss. The patient had an uneventful recovery to health. PMID:23093504

Characterization of materials eliciting foreign body reaction in stapled human gastrointestinal anastomoses.

PubMed

Lim, C B B; Goldin, R D; Darzi, A; Hanna, G B

2008-08-01

Staples are made of titanium, which elicits minimal tissue reaction. The authors have encountered foreign body reaction associated with stapled human gastrointestinal anastomoses, although the literature has no reports of this. The aim of this study was to identify the refractile foreign materials causing this reaction. Histological sections were taken from 14 gastrointestinal specimens from patients with a history of a stapled anastomosis within the specimen excised. These were reviewed by light and polarization microscopy. Scanning electron microscopy and energy dispersive X-ray analysis were carried out on these sections, staples and stapler cartridges used for gastrointestinal surgery. Foreign bodies rich in fluorine were found in three patients, and those rich in carbon in 12. Other elements identified included oxygen, calcium, sodium, potassium, magnesium, aluminium and silicon. One specimen was found to contain titanium with no surrounding foreign body reaction. Stapler cartridges contained carbon, oxygen, fluorine, calcium, sodium, potassium, magnesium, aluminium, silicon and traces of titanium. Staples were composed of pure titanium with some fibrous material on the surface containing elements found in stapler cartridges. The presence of foreign body reaction was confirmed in stapled human gastrointestinal anastomoses. The source of refractile materials eliciting this reaction was the stapler cartridges. (c) 2008 British Journal of Surgery Society Ltd. Published by John Wiley & Sons, Ltd.

Single-layer continuous suture contributes to the reduction of surgical complications in digestive tract anastomosis involving special anatomical locations.

PubMed

Li, Guo-Cai; Zhang, Yu-Chun; Xu, Yong; Zhang, Fang-Cheng; Huang, Wei-Hua; Xu, Jian-Qing; Ma, Qing-Jiu

2014-01-01

The key point of digestive cancer surgery is reconstruction and anastomosis of the digestive tract. Traditional anastomoses involve double-layer interrupted suturing, manually or using a surgical stapler. In special anatomical locations, however, suturing may become increasingly difficult and the complication rate increases accordingly. In this study, we aimed to investigate the feasibility and safety of a new manual suturing method, the single-layer continuous suture in the posterior wall of the anastomosis. Between January, 2007 and August, 2012, 101 patients with digestive cancer underwent surgery in Xi'an Gaoxin Hospital. Of those patients, 27 underwent surgery with the new manual method and the remaining 74 underwent surgery using traditional methods of anastomosis of the digestive tract. Surgical time, intraoperative blood loss, drainage duration, complications, blood tests, postoperative quality of life (QOL) and overall expenditure were recorded and analyzed. No significant differences were observed in surgical time, intraoperative blood loss, temperature, blood tests and postoperative QOL between the two groups. However, compared with the control group, the new manual suture group exhibited a lower surgical complication rate (7.40 vs. 31.08%; P=0.018), lower blood transfusion volume (274.07±419.33 vs. 646.67±1,146.06 ml; P=0.053), shorter postoperative hospital stay (14.60±4.19 vs. 17.60±6.29 days; P=0.038) and lower overall expenditure (3,509.85±768.68 vs. 6,141.83±308.90 renminbi; P=0.001). Our results suggested that single-layer continuous suturing for the anastomosis of the digestive tract is feasible and safe and may contribute to the reduction of surgical complications and overall expenditure.

Single-layer continuous suture contributes to the reduction of surgical complications in digestive tract anastomosis involving special anatomical locations

PubMed Central

LI, GUO-CAI; ZHANG, YU-CHUN; XU, YONG; ZHANG, FANG-CHENG; HUANG, WEI-HUA; XU, JIAN-QING; MA, QING-JIU

2014-01-01

The key point of digestive cancer surgery is reconstruction and anastomosis of the digestive tract. Traditional anastomoses involve double-layer interrupted suturing, manually or using a surgical stapler. In special anatomical locations, however, suturing may become increasingly difficult and the complication rate increases accordingly. In this study, we aimed to investigate the feasibility and safety of a new manual suturing method, the single-layer continuous suture in the posterior wall of the anastomosis. Between January, 2007 and August, 2012, 101 patients with digestive cancer underwent surgery in Xi’an Gaoxin Hospital. Of those patients, 27 underwent surgery with the new manual method and the remaining 74 underwent surgery using traditional methods of anastomosis of the digestive tract. Surgical time, intraoperative blood loss, drainage duration, complications, blood tests, postoperative quality of life (QOL) and overall expenditure were recorded and analyzed. No significant differences were observed in surgical time, intraoperative blood loss, temperature, blood tests and postoperative QOL between the two groups. However, compared with the control group, the new manual suture group exhibited a lower surgical complication rate (7.40 vs. 31.08%; P=0.018), lower blood transfusion volume (274.07±419.33 vs. 646.67±1,146.06 ml; P=0.053), shorter postoperative hospital stay (14.60±4.19 vs. 17.60±6.29 days; P=0.038) and lower overall expenditure (3,509.85±768.68 vs. 6,141.83±308.90 renminbi; P=0.001). Our results suggested that single-layer continuous suturing for the anastomosis of the digestive tract is feasible and safe and may contribute to the reduction of surgical complications and overall expenditure. PMID:24649327

A modified efficient purse-string stapling technique (mEST) that uses a new metal rod for intracorporeal esophagojejunostomy in laparoscopic total gastrectomy

PubMed Central

Moon, Jeong-Ho; Yamamoto, Kazuyoshi; Yanagimoto, Yoshitomo; Sugimura, Keijirou; Miyata, Hiroshi; Yano, Masahiko; Sakon, Masato

2017-01-01

Intracorporeal esophagojejunostomy after laparoscopic total gastrectomy is technically difficult because this procedure should be performed in a narrow surgical field in the upper abdomen even when completely laparoscopic approaches are used. The placement of the anvil of a circular stapling device into the esophagus and connection the instrument to the anvil are extremely difficult steps in this surgery. Therefore, we developed a simple technique for intracorporeal esophagojejunostomy using hemi-double stapling technique; we named this technique the efficient purse-string stapling technique (EST). More recently, we have developed a modified EST (mEST) that utilizes a new stainless steel anvil rod instead of a plastic rod. Relative to the plastic rod, the steel rod is reusable and shorter; thus, it was easier to perform anvil placement into the esophagus with the steel rod. Anvil preparation for mEST: a stainless steel rod is attached to the shaft of the anvil, and the needle and thread are sutured to the tip of the rod. After complete insertion of the anvil into the esophageal cavity, the needle and thread are used to penetrate the anterior esophageal wall, and the esophagus is then clamped using a linear stapler just distal to the site penetrated by the thread. The linear stapler is fired, and anvil placement in the esophagus is simultaneously accomplished. After the rod is removed from the anvil, the instrument is intracorporeally connected to the anvil and then fired to complete the gastrojejunostomy. This technique is simple and facilitates intracorporeal reconstruction procedures in laparoscopic total gastrectomy. PMID:28815221

[Technical questions of the transrectal specimen extraction].

PubMed

Lukovich, Péter; Csibi, Noémi; Bokor, Attila

2016-03-01

During laparoscopic partial colectomy the specimen can be extracted transrectally. This technique decreases the invasiveness of the surgery, because the abdominal wall incision is avoided. Premises of a new surgical technique are precise technical description as well as a favourable balance of advantages and disadvantages. In this paper the authors review the technique they apply and analyse their first results. 45 laparoscopic bowel resections were performed by a multidisciplinary team between 16th April 2014 and 1st November 2015. Indication of surgery was endometriosis, and the specimen was extracted transrectally in 11 patients. Having ligated both bowel ends proximal and distal to the section infiltrated with endometriosis, and the proximal bowel secured with a laparoscopic bulldog. Then the bowel was resected and the specimen was extracted in a camera bag transrectally. A purse-string suture was placed into the proximal bowel end, and the anvil of the circular stapler--which was introduced transrectally--was inserted into the bowel. After closing the rectal stump, the anastomosis was performed with a circular stapler. We used this technique when the upper third of the rectum or sigmoid colon was infiltrated with endometriosis. The difference between the operation time of the two techniques (transabdominal vs. transrectal specimen extraction: 108 min vs. 118 min) was not significant. There was not difference in the WBC count between the first and second postoperative day, and there was not any anastomosis leakage detected either. By using the above technique, postoperative infections could have been reduced to minimum. Transrectal specimen extraction did not increase postoperative complication The authors believe this is a safe way of specimen extraction after partial colectomy.

"How I do it"--radical right colectomy with side-to-side stapled ileo-colonic anastomosis.

PubMed

Hübner, M; Larson, D W; Wolff, B G

2012-08-01

Standardization of surgical technique helps to reproduce excellent clinical outcomes, especially in teaching institutions. We aim to describe in detail our established approach for oncological right colectomy. The right colon is mobilized in a five-step latero-inferior approach starting off with the terminal ileum, visualizing the duodenum and the head of pancreas. The ascending colon is dissected from the retroperitoneum, and takedown of the hepatic flexure is completed coming retrograde from the transverse colon. Transection of the remaining retroperitoneal attachments completes exposure of the duodenum and mobilization of the right colon. Ileocolic vessels are dissected out and divided close to their origin, and the mesocolon is divided. We then establish intestinal continuity by use of a side-to-side stapled technique. The arms of a linear cutting stapler are inserted via transverse incisions at the anti-mesenteric sides of the terminal ileum and the transverse colon (tenia) and fired. The enterotomy site is closed by removal of the specimen using a second transverse firing of the linear cutting stapler. An important final step is the reinforcement of the anastomotic ends and the crossing of the staple lines; an omental patch and closure of the mesenteric window are optional. The suggested standardized five-step lateral-to-medial dissection of the right colon and the three-step side-to-side stapled technique for ileo-colonic anastomosis are easy to learn and to reproduce. Careful adherence to pivotal technical details will help to obtain an optimal oncological outcome and a consistently low leak rate around 2%.

Recognition of Isolated Non-Speech Sounds.

DTIC Science & Technology

1987-05-31

stapler could be presented within a set of paper shuffling sounds and within a set of sounds characteristic of entering a room. The former context...should act in a top down manner to suggest a stapler event for the sound whereas the latter context will suggest that a light has been switched on. Such...Moulton Street Cambridge, MA 02238 " Department of the Army Or. William B. Rouse School of Industrial and Systems Director, Organizations and Systems

[Technical considerations on 222 cases of esophageal anastomosis using a stapler].

PubMed

Liboni, A; Zamboni, P; Mari, C; Uzzau, A; Salomoni, C; Brunelli, G; Buccoliero, F; Donini, I

1989-05-01

The Authors report their experience with 222 esophagoenteric anastomoses, performed in 211 cases for malignant neoplasms (middle and lower third) of the esophagus or stomach. Particularly, they have performed 4 Sujura operations, 31 esophagogastric, 4 esophagocolic, 183 esophagojejunal anastomoses utilizing SPTU, ILS and EEA circular stapler. GIA was used in the preparation of the stomach before esophagogastroplasty. Mortality rate of the manual period (1970-1980: 114 cases operated) was 14.5% versus 2.2% of the stapling period (1981-1987: 222 cases operated). From the technical point of view reasons of the superiority of stapled technique are discussed and summarized as follows: 1) space not favourable for handsewn anastomoses; 2) stapled technique allows the surgeon to save anastomoses vascularization; 3) the stapler performs the suture simultaneously so to reduce tensile strength on the anastomoses and the fragile esophageal wall especially; 4) stapled agraphes are fixed in three points vs. the two points of the handsewn stitches.

[The use of staplers for intestinal anastomosis in newborns].

PubMed

Kozlov, Iu A; Novozhilov, V A; Podkamenev, A V; Veber, I N

2013-01-01

The comparative experience of mechanical and manual intestinal anastomoses in newborns was analyzed. The main group (mechanical suture) consisted of 23 patients; the group of control consisted of 21 little patients. The mechanical intestinal suture was performed with the use of linear endoscopic stapler with 2.5 mm high staples. There were no differences in age and body weight between the two groups. The mean operative time was 77.4 min for the 1st group, whereas for the 2nd group it was 56.4 min. There were no significant difference in time before enteral feeding after the operation - 6.7 days on average. The hospital stay time was also identical (13.3 vs. 14.1 days). Postoperative period was uncomplicated in both groups. Thus, the use of mechanical stapler for intestinal anastomosis allows shorten the operative time, though preserving the same results of hospital stay and enteral feeding beginning.

Colovaginal anastomosis: an unusual complication of stapler use in restorative procedure after Hartmann operation

PubMed Central

Yan, Zhongshu; Liao, Guoqing

2005-01-01

Background Rectovaginal fistula is uncommon after lower anterior resection for rectal cancer. The most leading cause of this complication is involvement of the posterior wall of the vagina into the staple line when firing the circular stapler. Case presentation A 50-year-old women underwent resection for obstructed carcinoma of the sigmoid colon with Hartmann procedure. Four months later she underwent restorative surgery with circular stapler. Following which she developed rectovaginal fistula. A transvaginal repair was performed but stool passing from vagina not per rectum. Laporotomy revealed colovaginal anastomosis, which was corrected accordingly. Patient had an uneventful recovery. Conclusion Inadvertent formation of colovaginal anastomosis associated with a rectovaginal fistula is a rare complication caused by the operator's error. The present case again highlights the importance of ensuring that the posterior wall of vagina is away from the staple line. PMID:16285887

Innovative and cost-effective management of large omphalocele.

PubMed

Gupta, Parthapratim

2007-06-01

The aim of this study was to develop a method of management of large omphalocele, with easily available inexpensive materials. The efficacy of using the plastic of urine collection bag and paper stapler, in creating the "silo" for the management of 3 newborns with such defects, were assessed. All operations were done within 36 hours of birth. A silo was created with the plastic of a sterile urine collection bag, which was stapled with a paper stapler at its free margin. The omphalocele was gradually reduced every 24 to 48 hours, using the stapler, until the contents were reduced, when the abdominal wall was repaired. The mean time taken to close the abdominal defect was 34 days. All patients could be breast-fed from 48 hours after the first stage is done. Rooming in was done by day 7. None of the babies required assisted ventilation. This method is simple and cost-effective, using minimally expensive, easily available materials.

Can a curved stapler made for open surgery be useful in laparoscopic lower rectal resections? Technique and experience of a single centre.

PubMed

Mari, Francesco Saverio; Gasparrini, Marcello; Nigri, Giuseppe; Berardi, Giammauro; Laracca, Giovanni Guglielmo; Flora, Barbara; Pancaldi, Alessandra; Brescia, Antonio

2013-01-01

The use of laparoscopy to perform lower anterior rectal resection is increasing worldwide because it allows better visualisation and rectal mobilisation and also reduces postoperative pain and recovery. The Contour Curved Stapler (CCS) is a very helpful device because of its curved profile that enables better access into the pelvic cavity and allows rectal closure and section to be performed in one shot. In this paper, we present an original technique to use this device, made for open surgery, in laparoscopy and the results of our experience. We retrospectively evaluated the data of all patients who underwent lower laparoscopic anterior rectal resection and in which the CCS was used to perform section of the rectum between September 2005 and September 2011. To perform section of the rectum a Lapdisc(®) was inserted through a 6-7 cm supra-pubic midline incision to allow placement of the CCS into the pelvic cavity. Patients' biographical and surgical data such as sex, age, indication for surgery, infection, anastomotic leakage or stenosis and staple-line bleeding were prospectively collected in a computerised database and evaluated. Between September 2005 and September 2011, we performed 45 laparoscopic lower rectal resection using CCS, 27 male and 18 female with a mean age of 61 years (range 40-82 years) and a mean body mass index (BMI) of 26.5 kg/m(2) (range 16.5-35 kg/m(2)). In 29 cases a temporary ileostomy was performed. Mean operative time was 131 min (range 97-210 min). In all cases it was possible to perform a lower section of the rectum with CCS. No intraoperative or postoperative staple line bleeding occurred. In two patients we observed anastomotic leaks and in one of these a temporary ileostomy was performed. None of the patients showed an anastomotic stenosis at 1-year follow-up colonoscopy. This study shows that CCS enables section of the lower rectum to be easily performed, especially in adverse anatomical condition, and the technique proposed by us allows the use of this stapler without giving up the benefits of laparoscopic access. Copyright © 2012 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

Feasibility and safety of modified inverted T-shaped method using linear stapler with movable cartridge fork for esophagojejunostomy following laparoscopic total gastrectomy.

PubMed

Ohuchida, Kenoki; Nagai, Eishi; Moriyama, Taiki; Shindo, Koji; Manabe, Tatsuya; Ohtsuka, Takao; Shimizu, Shuji; Nakamura, Masafumi

2017-01-01

We previously reported the use of an inverted T-shaped method to obtain a suitable view for hand sewing to close the common entry hole when the linear stapler was fired for esophagojejunostomy after laparoscopic total gastrectomy (LTG). This conventional method involved insertion of the fixed cartridge fork to the Roux limb and the fine movable anvil fork to the esophagus to avoid perforation of the jejunum. However, insertion of the movable anvil fork to the esophagus during this procedure often requires us to strongly push down the main body of the stapler with the fixed cartridge fork to bring the direction of the anvil fork in line with the direction of the long axis of the esophagus while controlling the opening of the movable anvil fork. We therefore modified this complicated inverted T-shaped method using a linear stapler with a movable cartridge fork. This modified method involved insertion of the movable cartridge fork into the Roux limb followed by natural, easy insertion of the fixed anvil fork into the esophagus without controlling the opening of the movable cartridge fork. We performed LTG in a total of 155 consecutive patients with gastric cancer from November 2007 to December 2015 in Kyushu University Hospital. After LTG, we performed the conventional inverted T-shaped method using a linear stapler with a fixed cartridge fork in 61 patients from November 2007 to July 2011 (fixed cartridge group). From August 2011, we used a linear stapler with a movable cartridge fork and performed the modified inverted T-shaped method in 94 patients (movable cartridge group). We herein compare the short-term outcomes in 94 cases of LTG using the modified method (movable cartridge fork) with those in 61 cases using the conventional method (fixed cartridge fork). We found no significant differences in the perioperative or postoperative events between the movable and fixed cartridge groups. One case of anastomotic leakage occurred in the fixed cartridge group, but no anastomotic leakage occurred in the movable cartridge group. Although there were no remarkable differences in the short-term outcomes between the movable and fixed cartridge groups, we believe that the modified inverted T-shaped method is technically more feasible and reliable than the conventional method and will contribute to the improved safety of LTG.

Feasibility and safety of modified inverted T-shaped method using linear stapler with movable cartridge fork for esophagojejunostomy following laparoscopic total gastrectomy

PubMed Central

Ohuchida, Kenoki; Moriyama, Taiki; Shindo, Koji; Manabe, Tatsuya; Ohtsuka, Takao; Shimizu, Shuji; Nakamura, Masafumi

2017-01-01

Background We previously reported the use of an inverted T-shaped method to obtain a suitable view for hand sewing to close the common entry hole when the linear stapler was fired for esophagojejunostomy after laparoscopic total gastrectomy (LTG). This conventional method involved insertion of the fixed cartridge fork to the Roux limb and the fine movable anvil fork to the esophagus to avoid perforation of the jejunum. However, insertion of the movable anvil fork to the esophagus during this procedure often requires us to strongly push down the main body of the stapler with the fixed cartridge fork to bring the direction of the anvil fork in line with the direction of the long axis of the esophagus while controlling the opening of the movable anvil fork. We therefore modified this complicated inverted T-shaped method using a linear stapler with a movable cartridge fork. This modified method involved insertion of the movable cartridge fork into the Roux limb followed by natural, easy insertion of the fixed anvil fork into the esophagus without controlling the opening of the movable cartridge fork. Methods We performed LTG in a total of 155 consecutive patients with gastric cancer from November 2007 to December 2015 in Kyushu University Hospital. After LTG, we performed the conventional inverted T-shaped method using a linear stapler with a fixed cartridge fork in 61 patients from November 2007 to July 2011 (fixed cartridge group). From August 2011, we used a linear stapler with a movable cartridge fork and performed the modified inverted T-shaped method in 94 patients (movable cartridge group). We herein compare the short-term outcomes in 94 cases of LTG using the modified method (movable cartridge fork) with those in 61 cases using the conventional method (fixed cartridge fork). Results We found no significant differences in the perioperative or postoperative events between the movable and fixed cartridge groups. One case of anastomotic leakage occurred in the fixed cartridge group, but no anastomotic leakage occurred in the movable cartridge group. Conclusions Although there were no remarkable differences in the short-term outcomes between the movable and fixed cartridge groups, we believe that the modified inverted T-shaped method is technically more feasible and reliable than the conventional method and will contribute to the improved safety of LTG. PMID:28616606

Integrative advances for OCT-guided ophthalmic surgery and intraoperative OCT: microscope integration, surgical instrumentation, and heads-up display surgeon feedback.

PubMed

Ehlers, Justis P; Srivastava, Sunil K; Feiler, Daniel; Noonan, Amanda I; Rollins, Andrew M; Tao, Yuankai K

2014-01-01

To demonstrate key integrative advances in microscope-integrated intraoperative optical coherence tomography (iOCT) technology that will facilitate adoption and utilization during ophthalmic surgery. We developed a second-generation prototype microscope-integrated iOCT system that interfaces directly with a standard ophthalmic surgical microscope. Novel features for improved design and functionality included improved profile and ergonomics, as well as a tunable lens system for optimized image quality and heads-up display (HUD) system for surgeon feedback. Novel material testing was performed for potential suitability for OCT-compatible instrumentation based on light scattering and transmission characteristics. Prototype surgical instruments were developed based on material testing and tested using the microscope-integrated iOCT system. Several surgical maneuvers were performed and imaged, and surgical motion visualization was evaluated with a unique scanning and image processing protocol. High-resolution images were successfully obtained with the microscope-integrated iOCT system with HUD feedback. Six semi-transparent materials were characterized to determine their attenuation coefficients and scatter density with an 830 nm OCT light source. Based on these optical properties, polycarbonate was selected as a material substrate for prototype instrument construction. A surgical pick, retinal forceps, and corneal needle were constructed with semi-transparent materials. Excellent visualization of both the underlying tissues and surgical instrument were achieved on OCT cross-section. Using model eyes, various surgical maneuvers were visualized, including membrane peeling, vessel manipulation, cannulation of the subretinal space, subretinal intraocular foreign body removal, and corneal penetration. Significant iterative improvements in integrative technology related to iOCT and ophthalmic surgery are demonstrated.

Three-dimensional pulmonary model using rapid-prototyping in patient with lung cancer requiring segmentectomy.

PubMed

Akiba, Tadashi; Nakada, Takeo; Inagaki, Takuya

2014-01-01

Thoracoscopic pulmonary segmentectomy of the lung is sometime adopted for the lung cancer, but a problem with segmentectomy is variable anatomy. Recently, we are exploring the impact of three-dimensional models using rapid-prototyping technique. It is useful for decision making, surgical planning, and intraoperative orientation for surgical treatment in patient with lung cancer who underwent pulmonary segmentectomy. These newly created models allow us to clearly identify the surgical margin and the intersegmental plane, vessels, and bronchi related to the cancer in the posterior segment. To the best of our knowledge, there are few reports describing a pulmonary model so far.

Granulation tissue formation at the bronchial stump is reduced after stapler closure in comparison to suture closure in dogs.

PubMed

Izumi, Yotaro; Kawamura, Masafumi; Gika, Masatoshi; Nomori, Hiroaki

2010-03-01

The aim of this study was to compare the morphology of the bronchial stump after lobectomy between mechanical stapler closure and manual suture closure. The effect of fibrin glue application on each method of closure was also observed. Right upper lobectomy was performed in beagles (n=31) using staplers (ST group) or sutures (SU group). In a separate experiment, fibrin glue was sprayed onto the stump after each respective method of closure. After one week, the stump region was examined macroscopically, and also by histology. chi(2)-Test and Mann-Whitney test were used for comparative analysis. The incidence of adhesion formation between the surrounding tissues was significantly reduced in the ST group in comparison to the SU group (22 vs. 80%, P=0.04). The thickness of granulation tissue over the stump was significantly reduced in the ST group in comparison to the SU group (0.8+/-0.2 vs. 2.5+/-0.3 mm, P<0.0001). Vessel density in the granulation tissue was also significantly reduced in the ST group in comparison to the SU group (6+/-2 vs. 16+/-2, P=0.003). Fibrin glue application after stapler closure significantly increased the incidence of adhesion formation, granulation tissue thickness, and vessel density in the granulation tissue over the stump.

Detecting the limits of bronchial closure methods in an animal model.

PubMed

Tezel, C; Urek, S; Keles, M; Kiral, H; Koşar, A; Dudu, C; Arman, B

2006-04-01

Bronchopleural fistula is a serious complication of major lung resections that may lead to mortality. An experimental animal model was designed to find out the safest bronchial closure method by comparing leakage rates under pressure. The tracheobronchial trees of 50 freshly dead sheep were prepared for either manual closure or closure with a stapler. After left pneumonectomy, the specimens were divided into five groups (n = 10); 3/0 Premilene suture was used with two "u" sutures + interrupted sutures in Group I; in Group II, 3/0 Premilene sutures with continuous horizontal mattress + over-over continuous sutures were used. In Group III and IV the same techniques were used with 3/0 Vicryl. A stapler was used in Group V. Specimens were intubated with an endotracheal tube, connected to a sphygmomanometer, and subsequently positioned under water. The pressure level at which we detected air bubbles indicated the limits of the technique. The median leakage pressure resistance was significantly lower in Group III (135 mm Hg) ( P = 0.001). The best results were achieved by using the continuous horizontal mattress + over-over continuous suture technique. No statistical significance difference was found between the stapler group, Groups I, II, and IV in terms of median leakage pressures. This trial suggests that manual suture closure using an appropriate technique and monofilament materials is as safe as the stapler.

Anastomotic stricture complicating esophagectomy.

PubMed

Rice, Thomas W

2006-02-01

Regardless of the definition, anastomotic strictures are a common complication after esophagectomy and adversely affect quality of life. They are best avoided by careful surgical technique that minimizes conduit ischemia during preparation, placement, and anastomosis. Anastomotic technique must assure an adequate anastomotic area. The Collard anastomosis, a significant advance in the construction of esophagogastric anastomoses, routinely assures adequate anastomotic area and thus assures fewer anastomotic strictures. The use of small-diameter (21-mm and 25-mm) circular staplers is discouraged, because they are unquestionably associated with the occurrence of major anastomotic strictures. Anastomotic leaks precede many anastomotic strictures, but strictures are not inevitable after leaks. Other variables are less reliably associated with anastomotic strictures. Treatment requires diagnosis and exclusion of recurrent cancer and other causes of stricture. Dilation is safe, but diligence with repeated sessions is necessary to restore swallowing. Reoperation is rarely required.

[Efficiency of combined methods of hemorroid treatment using hal-rar and laser destruction].

PubMed

Rodoman, G V; Kornev, L V; Shalaeva, T I; Malushenko, R N

2017-01-01

To develop the combined method of treatment of hemorrhoids with arterial ligation under Doppler control and laser destruction of internal and external hemorrhoids. The study included 100 patients with chronic hemorrhoids stage II and III. Combined method of HAL-laser was used in study group, HAL RAR-technique in control group 1 and closed hemorrhoidectomy with linear stapler in control group 2. Сomparative evaluation of results in both groups was performed. Combined method overcomes the drawbacks of traditional surgical treatment and limitations in external components elimination which are inherent for HAL-RAR. Moreover, it has a higher efficiency in treating of hemorrhoids stage II-III compared with HAL-RAR and is equally safe and well tolerable for patients. This method does not increase the risk of recurrence, reduces incidence of complications and time of disability.

Congenital choledochal cyst: video-guided laparoscopic treatment.

PubMed

Farello, G A; Cerofolini, A; Rebonato, M; Bergamaschi, G; Ferrari, C; Chiappetta, A

1995-10-01

We report our first experience with a laparoscopic treatment of congenital choledochal cysts involving the total cyst resection and the reconstruction of the biliary and gastrointestinal tracts through a transmesocolic hepatic-jejunal Roux-en-Y loop anastomosis. The procedure was carried out in a 14-kg 6-year-old girl with a congenital choledochal cyst of the first type, according to the Alonso-Lej classification. The cyst was divided using a Multifire EndoGIA 30 stapler. Hepatic-jejunal and jejunojejunal anastomoses were made with 4.0 chrome catgut interrupted sutures. Intestinal recanalization occurred on the 2nd postoperative day and the postoperative course was uneventful. The laparoscopic approach affords several advantages: excellent intraoperative visualization of tiny structures and, therefore, great surgical accuracy; early resumption of peristalsis; no postoperative pain; no laparocele; prevention of adhesions; excellent esthetics; and quicker resumption of school and sports activities.

Laparoscopic transgastric gastroplasty: a novel technique for a large esophagogastric fistula.

PubMed

McKenna, Daniel T; Ziegler, Kathryn; Selzer, Don

2014-08-01

Esophagogastric fistula is a rare complication related to severe inflammation at the gastroesophageal junction. Most causes are related to severe gastroesophageal reflux disease, previous surgery, or malignancy. This is the case of a 72-year-old man who had a laparoscopic Nissen fundoplication. He developed an esophageal obstruction from an intraesophageal pledget. It was removed laparoscopically, and the esophagotomy was buttressed with a Nissen fundoplication. Two months later he developed severe dysphagia, and an esophagogastric fistula was diagnosed. This was a large fistula measuring 20 mm in diameter. A novel hybrid technique was used to divide the fundoplication. Under endoscopic guidance, a 12-mm balloon-tipped trocar was inserted transgastrically. A linear-cutting surgical stapler was used to divide the fundoplication and reopen the gastroesophageal junction. The patient had no further dysphagia or gastroesophageal reflux.

A surgical support system for Space Station Freedom

NASA Technical Reports Server (NTRS)

Campbell, M. R.; Billica, R. D.; Johnston, S. L.

1992-01-01

Surgical techniques in microgravity are being developed for the Health Maintenance Facility (HMF) on Space Station Freedom (SSF). This will be a presentation of the proposed surgical capabilities and ongoing hardware and procedural investigations. Methods: Procedures and prototype hardware, which include a medical restraint system, a surgical overhead isolation canopy, a suction device, and a regional laminar flow device were evaluated. This was accomplished by realistic sterile surgical simulations involving both mannequins and animals during KC-135 parabolic flight and in a high fidelity ground based HMF mockup. Results: Animal surgery in the environment of microgravity allowed the observation of unique arterial and venous bleeding characteristics for the first time. The ability to control bleeding and to prevent cabin atmosphere contamination was also demonstrated. Conclusions: The procedures and prototype hardware tested provided valuable information and should be investigated and developed further. The use of standard surgical techniques are possible in microgravity if the principles of personnel and supply restraint and operative field containment are adhered to.

Anastomotic complications after laparoscopic total gastrectomy with esophagojejunostomy constructed by circular stapler (OrVil™) versus linear stapler (overlap method).

PubMed

Kawamura, Hideki; Ohno, Yosuke; Ichikawa, Nobuki; Yoshida, Tadashi; Homma, Shigenori; Takahashi, Masahiro; Taketomi, Akinobu

2017-12-01

Esophagojejunostomy after laparoscopic total gastrectomy (LTG) is the most technically difficult type of anastomosis; thus, anastomotic complications such as leakage and stenosis sometimes occur. Identification of the safest anastomotic procedure is important for successful LTG. We have performed LTG since 2004 either with a circular stapler using an OrVil ™ anvil or via the overlap Orringer method with a linear stapler. This retrospective study aimed to determine which method results in a lower incidence of anastomotic complications in patients undergoing LTG. Data on 188 consecutive patients who underwent LTG between April 2004 and August 2016 were retrospectively reviewed. Patients were divided into those who underwent esophagojejunostomy performed via a circular stapler using an OrVil ™ anvil (group C, n = 49) or via the overlap method (group L, n = 139). Anastomotic complications occurred in five of 188 esophagojejunostomies (2.7%). They comprised three cases of leakage (1.6%), and two of stenosis (1.1%). There was no significant difference in patient characteristics or hematological variables between groups C and L. There was no significant difference between groups in operation time, blood loss, lymph node dissection, and intraoperative anastomotic problems. The rate of anastomotic complications was significantly lower in group L (0.7%, 1/139) than in group C (8.2%, 4/49; p = 0.005). In particular, anastomotic leakage in group L tended to be lower (0.7% 1/139) than in group C (4.1% 2/49), although this difference was not significant. The rate of anastomotic stenosis in group L was significantly lower (0%, 0/139) than in group C (4.1%, 2/49; p = 0.017). Furthermore multivariate analysis showed anastomotic procedure was an independent factor for anastomotic complication. There were fewer anastomotic complications after overlap esophagojejunostomy than after esophagojejunostomy via the OrVil ™ procedure, especially regarding anastomotic stenosis. We therefore recommend the overlap technique when performing esophagojejunostomy.

[Does the third staple line of a new endostapler offer an advantage?].

PubMed

Czymek, R; Keller, R; Hildebrand, P; Bouchard, R; Bader, F G; Jungbluth, T; Mirow, L; Roblick, U J; Bruch, H-P

2009-06-01

In laparoscopic colon surgery, endostaplers generate 2 parallel rows of staples. The aim of this paper is to analyse whether the introduction of a new endostapler generating a third row of staples influences the rate of anastomotic leakage and bleedings. 362 patients of the Department of Surgery, University Clinic of Schleswig-Holstein, Campus Lübeck, were included in this study. All patients underwent colon resection with performance of double-stapling anastomosis. In Group I (n = 148; 7 / 2004 to 12 / 2005), the Endopath TSB 45 endostapler (2 rows of staples) was used, whereas in Group II (n = 214; 7 / 2006 to 12 / 2007), the Echelon60 EC60 stapler (3 rows of staples) was used. All further operational steps were identical for both groups. Target parameters were the postoperative anastomotic leakage and anastomotic bleeding rates. Between July 2004 and December 2005, the number of anastomotic leaks (Stapler Endopath, TSB 45) was n = 4 (2.7 %), for the second period (Stapler Echelon60 EC60), it was n = 9 (3.7 %) (not significant). Using the Endopath TSB 45 stapler, the number of anastomotic bleedings was n = 12 (8.1 %), and for the Echelon60 EC60 stapler, it was n = 8 (3.7 %) (p = 0.074; not significant). Within the 18-month period between July 2006 and December 2007, the number of endoscopic colon operations (n = 214) rose by 44.6 % compared to the 18-month period between July 2004 and December 2005 (n = 148). The application of the advanced Echelon endostapler has no impact on the number of anastomotic leaks, and reduces the number of anastomotic bleedings slightly but not significantly. The increased number of endoscopic procedures in the second period results both from the growing number of indications for the application of endoscopic techniques and the positive findings of recent studies carried out by our own and other working groups.

Performance of Facepiece Respirators and Surgical Masks Against Surgical Smoke: Simulated Workplace Protection Factor Study.

PubMed

Gao, Shuang; Koehler, Richard H; Yermakov, Michael; Grinshpun, Sergey A

2016-06-01

Surgical smoke generated during electrocautery contains toxins which may cause adverse health effects to operating room (OR) personnel. The objective of this study was to investigate the performance of surgical masks (SMs), which are routinely used in ORs, more efficient N95 surgical mask respirator (SMRs) and N100 filtering facepiece respirator (FFRs), against surgical smoke. Ten subjects were recruited to perform surgical dissections on animal tissue in a simulated OR chamber, using a standard electrocautery device, generating surgical smoke. Six respiratory protective devices (RPDs) were tested: two SMs, two SMRs, and two N100 FFRs [including a newly developed faceseal (FS) prototype]. Fit testing was conducted before the experiment. Each subject was then exposed to the surgical smoke while wearing an RPD under the tests. Concentrations inside (C in) and outside (C out) of the RPD were measured by a particle size spectrometer. The simulated workplace protection factor (SWPF) was determined by the ratio of C out and C in for each RPD-wearing subject. For the SMs, the geometric means of SWPFtotal (based on the total aerosol concentration) were 1.49 and 1.76, indicating minimal protection. The SWPFtotal values of the SMRs and N100 FFRs were significantly higher than those of the SMs: for the two SMRs, the SWPFtotal were 208 and 263; for the two N100s, the SWPFtotal values were 1,089 and 2,199. No significant difference was observed between either the two SMs or the two SMRs. The SWPFtotal for the novel FS prototype N100 FFR was significantly higher than the conventional N100 FFR. The correlation between SWPFtotal and fit factor (FF) determined for two N95 SMRs was not significant. SMs do not provide measurable protection against surgical smoke. SMRs offer considerably improved protection versus SMs, while the N100 FFRs showed significant improvement over the SMRs. The FS prototype offered a higher level of protection than the standard N100 FFR, due to a tighter seal. While we acknowledge that conventional N100 FFRs (equipped with exhalation valves) are not practical for human OR use, the results obtained with the FS prototype demonstrate the potential of the new FS technology for implementation on various types of respirators. © The Author 2016. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

[Stapler versus manual anastomosis in gastrointestinal surgery].

PubMed

Moreno-Gonzalez, E; Vara-Thorbeck, R

1987-01-01

The comparative effectiveness of manual and auto-sutured anastomoses after total gastrectomy (107 cases), low anterior rectal resection (100 cases) and right hemicolectomy (34 cases) is studied. In the stapled series the incidence of anastomotic leakage was somewhat less, although benign stenosis occurred more frequently than with hand-sutured anastomoses. However, this could not be statistically demonstrated. In the authors' view, the main advantages of the use of staplers are the shortening of operating time and the lessening of septic steps.

Industrial Technology Modernization Program. Phase 3 Proposal, Category 1 Project Countermeasures Assembly Improvements

DTIC Science & Technology

1985-05-24

Tracor INDUSTRIAL TECHNOLOGY MODERNIZATION PROGRAM DTICRt .1ECTE CDJUN07 1989 00 PHASE 3 PROPOSAL CATEGORY 1 PROJECT COUNTERMEASURES ASSEMBLY...package in bin C V_ Put-package back in bin C Put part in plastic bag 0CDV _7 _ ] Seal plastic bag with stapler CDDV _ _- 1 Mark paperwork CDV __ I Peel...part in plastic bag CDV7 Seal plastic bag with stapler C>CDV _ Mark paperwork ~CV_ _ Peel preprinted tag from sheet ~ D Put preprinted tag on plastic

EEA stapler and omental graft in esophagogastrectomy: experience with 30 intrathoracic anastomoses for cancer.

PubMed Central

Fekete, F; Breil, P; Ronsse, H; Tossen, J C; Langonnet, F

1981-01-01

Experience with the EEA stapler device used in 30 esophagogastric resections for cancer with intrathoracic anastomosis, is reported. The mortality rate was 13.3%. The anastomotic failure rate was 3.3% (1/30) with only one death; three asymptomatic blind fistulas were found on a routine contrast examination of the anastomosis. It is felt that esophagogastric EEA stapled anastomosis associated with an omental graft is a very safe technique. Images Fig. 4. Fig. 5. Fig. 6. PMID:7247526

Advancement of thyroid surgery video recording: A comparison between two full HD head mounted video cameras.

PubMed

Ortensi, Andrea; Panunzi, Andrea; Trombetta, Silvia; Cattaneo, Alberto; Sorrenti, Salvatore; D'Orazi, Valerio

2017-05-01

The aim of this study was to test two different video cameras and recording systems used in thyroid surgery in our Department. This is meant to be an attempt to record the real point of view of the magnified vision of surgeon, so as to make the viewer aware of the difference with the naked eye vision. In this retrospective study, we recorded and compared twenty thyroidectomies performed using loupes magnification and microsurgical technique: ten were recorded with GoPro ® 4 Session action cam (commercially available) and ten with our new prototype of head mounted video camera. Settings were selected before surgery for both cameras. The recording time is about from 1 to 2 h for GoPro ® and from 3 to 5 h for our prototype. The average time of preparation to fit the camera on the surgeon's head and set the functionality is about 5 min for GoPro ® and 7-8 min for the prototype, mostly due to HDMI wiring cable. Videos recorded with the prototype require no further editing, which is mandatory for videos recorded with GoPro ® to highlight the surgical details. the present study showed that our prototype of video camera, compared with GoPro ® 4 Session, guarantees best results in terms of surgical video recording quality, provides to the viewer the exact perspective of the microsurgeon and shows accurately his magnified view through the loupes in thyroid surgery. These recordings are surgical aids for teaching and education and might be a method of self-analysis of surgical technique. Copyright © 2017 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

Integrative Advances for OCT-Guided Ophthalmic Surgery and Intraoperative OCT: Microscope Integration, Surgical Instrumentation, and Heads-Up Display Surgeon Feedback

PubMed Central

Ehlers, Justis P.; Srivastava, Sunil K.; Feiler, Daniel; Noonan, Amanda I.; Rollins, Andrew M.; Tao, Yuankai K.

2014-01-01

Purpose To demonstrate key integrative advances in microscope-integrated intraoperative optical coherence tomography (iOCT) technology that will facilitate adoption and utilization during ophthalmic surgery. Methods We developed a second-generation prototype microscope-integrated iOCT system that interfaces directly with a standard ophthalmic surgical microscope. Novel features for improved design and functionality included improved profile and ergonomics, as well as a tunable lens system for optimized image quality and heads-up display (HUD) system for surgeon feedback. Novel material testing was performed for potential suitability for OCT-compatible instrumentation based on light scattering and transmission characteristics. Prototype surgical instruments were developed based on material testing and tested using the microscope-integrated iOCT system. Several surgical maneuvers were performed and imaged, and surgical motion visualization was evaluated with a unique scanning and image processing protocol. Results High-resolution images were successfully obtained with the microscope-integrated iOCT system with HUD feedback. Six semi-transparent materials were characterized to determine their attenuation coefficients and scatter density with an 830 nm OCT light source. Based on these optical properties, polycarbonate was selected as a material substrate for prototype instrument construction. A surgical pick, retinal forceps, and corneal needle were constructed with semi-transparent materials. Excellent visualization of both the underlying tissues and surgical instrument were achieved on OCT cross-section. Using model eyes, various surgical maneuvers were visualized, including membrane peeling, vessel manipulation, cannulation of the subretinal space, subretinal intraocular foreign body removal, and corneal penetration. Conclusions Significant iterative improvements in integrative technology related to iOCT and ophthalmic surgery are demonstrated. PMID:25141340

Treatment of a giant pulmonary emphysematous cyst with primary bronchoalveolar papillary carcinoma in a Shih Tzu dog.

PubMed

Park, Jiyoung; Lee, Hae-Beom; Jeong, Seong Mok

2017-01-01

To report the surgical treatment of a pulmonary emphysematous cyst concurrent with primary pulmonary bronchoalveolar papillary carcinoma in a dog. Clinical case report. 12-year-old 6.4 kg spayed female Shih Tzu dog. The dog presented for surgical treatment of pulmonary emphysema. Radiography revealed that more than half of the left caudal lung lobe was enlarged and hyperlucent and computed tomography (CT) confirmed the presence of an emphysematous space. Thoracoscopic lung lobectomy was attempted but was converted to an intercostal thoracotomy due to poor visualization and pleural adhesions. A left caudal total lung lobectomy was performed using a self-cutting endoscopic stapler. The dog recovered uneventfully and a postoperative histopathologic diagnosis of pulmonary cystic bronchoalveolar papillary carcinoma was made. Re-evaluation using a CT scan with contrast study on postoperative days 27 and 177 revealed no evidence of residual, metastatic, or recurrent lesions. The dog has been doing well since surgery during the 11 month follow-up period. This case report suggests a potential relationship between pulmonary emphysematous diseases and primary lung tumors in dogs. © 2016 The American College of Veterinary Surgeons.

Accidental entrapment of an endo-bronchial blocker tip by a surgical stapler during selective ventilation for lung lobectomy in a dog.

PubMed

Levionnois, Olivier L; Bergadano, Alessandra; Schatzmann, Urs

2006-01-01

To describe the use of an endobronchial blocker (EBB) and to perform selective ventilation during pulmonary lobe resection via thoracotomy in a dog and report its accidental stapling in the resection site. Clinical case report. One female dog with a suspected abscess or neoplasia of the right caudal pulmonary lobe. One-lung ventilation was performed using a wire-guided EBB to seal the contaminated parenchyma and facilitate surgical access. The affected lung parenchyma was resected and the resection site was closed with staples. Lobar resection was performed successfully, but the loop of the EBB guide wire was inadvertently entrapped in the staple line of the lobectomy. Staples were removed to release the wire loop, and the resulting air leak caused loss of ventilation control until the parenchyma was re-sealed. We recommend removing the wire guide associate with the EBB after successful lung separation to avoid accidents that could have life-threatening consequences if not recognized. One-lung ventilation is useful to isolate healthy parenchyma from diseased parenchyma during lobectomy. Anesthesiologists and surgeons need to be aware of the potential complications associated with use of EBB.

Development of three-dimensional hollow elastic model for cerebral aneurysm clipping simulation enabling rapid and low cost prototyping.

PubMed

Mashiko, Toshihiro; Otani, Keisuke; Kawano, Ryutaro; Konno, Takehiko; Kaneko, Naoki; Ito, Yumiko; Watanabe, Eiju

2015-03-01

We developed a method for fabricating a three-dimensional hollow and elastic aneurysm model useful for surgical simulation and surgical training. In this article, we explain the hollow elastic model prototyping method and report on the effects of applying it to presurgical simulation and surgical training. A three-dimensional printer using acrylonitrile-butadiene-styrene as a modeling material was used to produce a vessel model. The prototype was then coated with liquid silicone. After the silicone had hardened, the acrylonitrile-butadiene-styrene was melted with xylene and removed, leaving an outer layer as a hollow elastic model. Simulations using the hollow elastic model were performed in 12 patients. In all patients, the clipping proceeded as scheduled. The surgeon's postoperative assessment was favorable in all cases. This method enables easy fabrication at low cost. Simulation using the hollow elastic model is thought to be useful for understanding of three-dimensional aneurysm structure. Copyright © 2015 Elsevier Inc. All rights reserved.

Accuracy of using computer-aided rapid prototyping templates for mandible reconstruction with an iliac crest graft

PubMed Central

2014-01-01

Background This study aimed to evaluate the accuracy of surgical outcomes in free iliac crest mandibular reconstructions that were carried out with virtual surgical plans and rapid prototyping templates. Methods This study evaluated eight patients who underwent mandibular osteotomy and reconstruction with free iliac crest grafts using virtual surgical planning and designed guiding templates. Operations were performed using the prefabricated guiding templates. Postoperative three-dimensional computer models were overlaid and compared with the preoperatively designed models in the same coordinate system. Results Compared to the virtual osteotomy, the mean error of distance of the actual mandibular osteotomy was 2.06 ± 0.86 mm. When compared to the virtual harvested grafts, the mean error volume of the actual harvested grafts was 1412.22 ± 439.24 mm3 (9.12% ± 2.84%). The mean error between the volume of the actual harvested grafts and the shaped grafts was 2094.35 ± 929.12 mm3 (12.40% ± 5.50%). Conclusions The use of computer-aided rapid prototyping templates for virtual surgical planning appears to positively influence the accuracy of mandibular reconstruction. PMID:24957053

Pharyngocutaneous fistula after total laryngectomy: Less common with mechanical stapler closure.

PubMed

Calli, Caglar; Pinar, Ercan; Oncel, Semih

2011-05-01

The aim of the study was to compare the incidences of pharyngocutaneous fistula after total laryngectomy between patients who underwent manual and mechanical suturing for pharyngoesophageal closure. In a retrospective and prospective nonrandomized clinical study conducted at a single tertiary medical center between May 2002 and April 2009, we compared the incidence of pharyngocutaneous salivary fistula between two groups of patients after total laryngectomy. Sixty-one consecutive patients who underwent mechanical suturing with a 60-mm linear stapler (group A) were prospectively enrolled, and 121 patients who had undergone manual suturing (group B) were retrospectively reviewed. The groups were similar in terms of age, gender, comorbidities, TNM (tumor, node, metastasis) stage, and laryngeal tumor extension. The incidence of pharyngocutaneous salivary fistula was 4.9% in group A and 19.8% in group B (p = 0.014). Mechanical stapler closure of the pharynx after total laryngectomy was associated with a significant reduction in the incidence of pharyngocutaneous fistula compared with manual suture in selected cases.

Comparison of Outcomes with Hand-sewn Versus Stapler Closure of Pancreatic Stump in Distal Pancreatectomy.

PubMed

Futagawa, Yasuro; Takano, Yuki; Furukawa, Kenei; Kanehira, Masaru; Onda, Shinji; Sakamoto, Taro; Gocho, Takeshi; Shiba, Hiroaki; Yanaga, Katsuhiko

2017-05-01

The optimal method for pancreatic stump closure to prevent postoperative pancreatic fistula (POPF) after distal pancreatectomy (DP), remains controversial though DP is still the only curative treatment for pancreatic cancer and other malignancies located on pancreatic body or tail. A total of 44 patients who consecutively underwent open DP were retrospectively analyzed, dividing them into two groups: group H (hand-sewn; n=24) and group S (stapler closure; n=20). POPFs were encountered in 5 (21%) and 11 (55%) patients in groups H and S, respectively (p=0.02). POPFs of Clavien-Dindo grade IIIa or above were observed in two (8%) and seven (35%) patients in groups H and S, respectively (p=0.03). When indicating stapler closure, caution should be exercised for pancreatic consistency and thickness, device and cartridge type, and pancreatic duct ligation to more effectively control POPF rates. Copyright© 2017, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

Circular Stapler-Assisted Extraperitoneal Colostomy in Laparoscopic Abdominoperineal Resection: a Single Surgeon Experience.

PubMed

Zhang, Peng; Bai, Jie; Shuai, Xiaoming; Chang, Weilong; Gao, Jinbo; Liu, Xinghua; Wang, Guobin; Tao, Kaixiong

2016-03-01

Nowadays, laparoscopic abdominoperineal resection (LAPR) not only has the same oncologic safety of open surgery and but also has the common advantages of laparoscopic surgery. However, given the difficulty in operation and long operative time, laparoscopic extraperitoneal colostomy construction is rarely practiced and reported. In this study, we describe technique of extraperitoneal colostomy using circular stapler following LAPR and demonstrate its efficacy and safety. This is a retrospective analysis of prospectively maintained data of 42 patients who underwent LAPR with circular stapler-assisted extraperitoneal colostomy in our department between July 2011 and June 2014. The mean time for extraperitoneal colostomy construction was 25 min (18-33 min). The mean operative time, estimated blood loss, postoperative gastrointestinal function recovery time, and duration of postoperative hospital stay were 160 min (115-225 min), 45 ml (10-250 ml), 33 h (26-45 h), and 8.6 days (6-13 days), respectively; 4.8 % of the patients had postoperative short-term complications. There were no stenosis, prolapse, and parastomal hernia observed in follow-up period. At 6 months after operation, 26 patients (62 %) claimed to be satisfied with their postoperative stool habits, 29 patients (69 %) had sensation to defecate per stoma, and 11 (26.2 %) patients had the ability to defer defecation for solid or liquid stool per stoma. Circular stapler-assisted extraperitoneal colostomy is an easy, effective, and safe technique following LAPR and appears to minimize the occurrence of stomal complications and improve the quality of life for patients.

Serosal Laceration During Firing of Powered Linear Stapler Is a Predictor of Staple Malformation.

PubMed

Matsuzawa, Fumihiko; Homma, Shigenori; Yoshida, Tadashi; Konishi, Yuji; Shibasaki, Susumu; Ishikawa, Takahisa; Kawamura, Hideki; Takahashi, Norihiko; Iijima, Hiroaki; Taketomi, Akinobu

2017-12-01

Although several types of staplers have been developed, staple-line leaks have been a great problem in gastrointestinal surgery. Powered linear staplers were recently developed to further reduce the risk of tissue trauma during laparoscopic surgery. The aim of this study was to identify the factors that predict staple malformation and determine the effect of precompression and slow firing on the staple formation of this novel powered stapling method. Porcine stomachs were divided using an endoscopic powered linear stapler with gold reloads. We divided the specimens into 9 groups according to the precompression time (0/60/180 seconds) and firing time (0/60/180 seconds). The occurrence and length of laceration and the shape of the staples were evaluated. We examined the factors influencing successful stapling and investigated the key factors for staple malformation. Precompression significantly decreased the occurrence and length of serosal laceration. Precompression and slow firing significantly improved the optimal stapling formation rate. Univariate analysis showed that the precompression time (0 seconds), firing time (0 seconds), and presence of serosal laceration were significantly associated with a low optimal formation rate. Multivariate analysis showed that these three factors were associated independently with low optimal formation rate and that the presence of serosal laceration was the only factor that could be detected during the stapling procedure. We have shown that serosal laceration is a predictor of staple malformation and demonstrated the importance of precompression and slow stapling when using the powered stapling method.

[Closure of pancreas stump after distal and segmental resection : Suture, stapler, coverage or anastomosis?

PubMed

Michalski, C W; Tramelli, P; Büchler, M W; Hackert, T

2017-01-01

Postoperative pancreatic fistulas represent the most frequent complication after distal and segmental pancreatectomy and occur with a frequency of up to 50 %. There are many technical variations of pancreatic stump treatment for reduction of fistula rates after distal resection. Most of these techniques have only been analyzed in retrospective studies and the evidence for or against a specific technique is low. Several retrospective trials have been conducted with good results to compare suturing with stapled closure of the remnant and to assess the effect of a vascularized falciform ligament patch in reducing postoperative pancreatic fistula; however, in a recently published randomized trial, which analyzed closure of the remnant with a pancreaticojejunostomy compared to standard closure, these results could not be confirmed. Because stapler resection and closure is the most commonly used technique in laparoscopic distal pancreatectomy, there are a large number of studies which assessed various novel methods of improving stapling. Extended stapler compression time and mesh augmentation of the stapler line can be valid methods to reduce fistula rates. Central pancreatectomy is a relatively rarely used procedure where the right-sided pancreatic remnant is closed in the same fashion as during distal pancreatectomy and the left-sided remnant is connected to the intestines with a pancreaticojejunostomy or pancreaticogastrostomy. In conclusion, postoperative pancreatic fistula rates are still a relevant clinical problem after distal pancreatectomy and further studies on potentially improved novel techniques are required.

Transanal haemorrhoidal dearterialisation with mucopexy versus stapler haemorrhoidopexy: a randomised trial with long-term follow-up

PubMed Central

Lucarelli, R; Caporossi, M; De Angelis, F; Di Filippo, A; Stipa, F; Spaziani, E

2013-01-01

Introduction The present study aimed to compare the long-term results of transanal haemorrhoidal dearterialisation (THD) with mucopexy and stapler haemorrhoidopexy (SH) in treatment of grade III and IV haemorrhoids. Methods One hundred and twenty-four patients with grade III and IV haemorrhoids were randomised to receive THD with mucopexy (n=63) or SH (n=61). A telephone interview with a structured questionnaire was performed at a median follow-up of 42 months. The primary outcome was the occurrence of recurrent prolapse. Patients, investigators and those assessing the outcomes were blinded to group assignment. Results Recurrence was present in 21 patients (16.9%). It occurred in 16 (25.4%) in the THD group and 5 (8.2%) in the SH group (p=0.021). A second surgical procedure was performed in eight patients (6.4%). Reoperation was open haemorrhoidectomy in seven cases and SH in one case. Five patients out of six in the THD group and both patients in the SH group requiring repeat surgery presented with grade IV haemorrhoids. No significant difference was found between the two groups with respect to symptom control. Patient satisfaction for the procedure was 73.0% after THD and 85.2% after SH (p=0.705). Postoperative pain, return to normal activities and complications were similar. Conclusions The recurrence rate after THD with mucopexy is significantly higher than after SH at long-term follow-up although results are similar with respect to symptom control and patient satisfaction. A definite risk of repeat surgery is present when both procedures are performed, especially for grade IV haemorrhoids. PMID:23676807

A comparison of anterior and posterior approaches for the surgical treatment of pancreatic pseudocyst using laparoscopic cystogastrostomy.

PubMed

Barragan, Barnard; Love, Lance; Wachtel, Mitchell; Griswold, John A; Frezza, Eldo E

2005-12-01

Laparoscopic treatment of pancreatic pseudocyst allows for definitive drainage with faster recovery. Although many groups have reported their experience with an anterior approach, only a few have done so with a posterior approach. This paper compares the approaches, analyzing their potential benefits and pitfalls. Seven females and one male underwent laparoscopic cystgastrostomy to treat pancreatic pseudocysts. The anterior approach was performed by opening the stomach anteriorly, localizing the pseudocyst ultrasonographically, draining the cyst with a needle and, via the same opening, using a stapler to form a cystgastrostomy. The posterior approach was performed by directly visualizing the posterior gastric wall and the pseudocyst, opening and draining the cyst with a needle, and using a stapler and running sutures for closure. All patients had gallstone pancreatitis. Cystgastrostomy via the anterior approach was used in 4 patients and via the posterior approach in 4 patients. Dense adhesions required one attempted posterior cystgastrostomy to be converted to an anterior approach. The mean age of the anterior group was 38 years (range, 18-58 years) and hospital stay was 6 days (range, 4-8 days): for the posterior group, mean age was 42 years (range, 40-44 years) and length of stay was 3 days (range, 2-4 days). Although both approaches had good results with no complications and short hospital stays, the posterior approach is safer, with a more precise cyst visualization and dissection that permits more tissue to be sent for histopathologic examination. Furthermore, the posterior approach?s larger anastomosis would seem to yield fewer occlusions, which are commonly seen with the anterior approach. The anterior approach is easier to learn, but it requires the opening of the anterior stomach and the use of ultrasound.

Evaluation of Sensor Configurations for Robotic Surgical Instruments

PubMed Central

Gómez-de-Gabriel, Jesús M.; Harwin, William

2015-01-01

Designing surgical instruments for robotic-assisted minimally-invasive surgery (RAMIS) is challenging due to constraints on the number and type of sensors imposed by considerations such as space or the need for sterilization. A new method for evaluating the usability of virtual teleoperated surgical instruments based on virtual sensors is presented. This method uses virtual prototyping of the surgical instrument with a dual physical interaction, which allows testing of different sensor configurations in a real environment. Moreover, the proposed approach has been applied to the evaluation of prototypes of a two-finger grasper for lump detection by remote pinching. In this example, the usability of a set of five different sensor configurations, with a different number of force sensors, is evaluated in terms of quantitative and qualitative measures in clinical experiments with 23 volunteers. As a result, the smallest number of force sensors needed in the surgical instrument that ensures the usability of the device can be determined. The details of the experimental setup are also included. PMID:26516863

Evaluation of Sensor Configurations for Robotic Surgical Instruments.

PubMed

Gómez-de-Gabriel, Jesús M; Harwin, William

2015-10-27

Designing surgical instruments for robotic-assisted minimally-invasive surgery (RAMIS) is challenging due to constraints on the number and type of sensors imposed by considerations such as space or the need for sterilization. A new method for evaluating the usability of virtual teleoperated surgical instruments based on virtual sensors is presented. This method uses virtual prototyping of the surgical instrument with a dual physical interaction, which allows testing of different sensor configurations in a real environment. Moreover, the proposed approach has been applied to the evaluation of prototypes of a two-finger grasper for lump detection by remote pinching. In this example, the usability of a set of five different sensor configurations, with a different number of force sensors, is evaluated in terms of quantitative and qualitative measures in clinical experiments with 23 volunteers. As a result, the smallest number of force sensors needed in the surgical instrument that ensures the usability of the device can be determined. The details of the experimental setup are also included.

Pleural Covering Application for Recurrent Pneumothorax in a Patient with Birt-Hogg-Dubé Syndrome

PubMed Central

Otsuji, Mizuto; Mizobuchi, Teruaki; Kurihara, Masatoshi; Takahashi, Kazuhisa; Seyama, Kuniaki

2015-01-01

Birt-Hogg-Dubé syndrome (BHDS) is a rare hereditary disease that presents with multiple lung cysts and recurrent pneumothorax. These cysts occupy predominantly the lower-medial zone of the lung field adjacent to the interlobar fissure, and some of them abut peripheral pulmonary vessels. For the surgical management of pneumothorax with BHDS, the conventional approach of resecting all subpleural cysts and bullae is not feasible. Thus, after handling several bullae by using a stapler or performing ligation as a standardized treatment, we applied to a pleural covering technique to thicken the affected visceral pleura and then to prevent recurrence of pneumothorax. We herein report the successful application of a pleural covering technique via thoracoscopic surgery to treat the recurrent pneumothorax of a 30-year-old man with BHDS. This technique is promising for the management of intractable pneumothorax secondary to BHDS. PMID:26370712

Pleural Covering Application for Recurrent Pneumothorax in a Patient with Birt-Hogg-Dubé Syndrome.

PubMed

Ebana, Hiroki; Otsuji, Mizuto; Mizobuchi, Teruaki; Kurihara, Masatoshi; Takahashi, Kazuhisa; Seyama, Kuniaki

2016-06-20

Birt-Hogg-Dubé syndrome (BHDS) is a rare hereditary disease that presents with multiple lung cysts and recurrent pneumothorax. These cysts occupy predominantly the lower-medial zone of the lung field adjacent to the interlobar fissure, and some of them abut peripheral pulmonary vessels. For the surgical management of pneumothorax with BHDS, the conventional approach of resecting all subpleural cysts and bullae is not feasible. Thus, after handling several bullae by using a stapler or performing ligation as a standardized treatment, we applied to a pleural covering technique to thicken the affected visceral pleura and then to prevent recurrence of pneumothorax. We herein report the successful application of a pleural covering technique via thoracoscopic surgery to treat the recurrent pneumothorax of a 30-year-old man with BHDS. This technique is promising for the management of intractable pneumothorax secondary to BHDS.

[The Misgav Ladach method for cesarean section].

PubMed

Habek, Dubravko; Kulas, Tomislav; Karsa, Matija

2007-04-01

The Misgav Ladach method for cesarean section is based on the principles of surgical minimalism. This is based on the Joel Cohen laparotomy, somewhat higher than the Pfannenstiel incision. Subcutaneous tissue is left undisturbed apart from the midline, rectus muscles are separated by pulling. The peritoneum is opened by stretching with index fingers. The hysterotomy is closed with one layer extraendometrial continuous absorbable stitches (Vicryl), and the visceral and parietal peritoneal layers are left open. Fascia is stitched with a continuous synthetic absorbable stitch. The skin is closed with intracutaneous resorptive suture or metallic stapler sutures. The Misgav Ladach method is restrictive in the use of sharp instruments preferring manual manipulation: it gives faster recovery, shorter period to normal bowel function, less peritoneal adhesions and less scarring in the abdominal layers, less use of postoperative antibiotics, analgesics and antipyretics, and a shorter anesthetic and operative time. It is ideal for emergency and planned cesarean section.

Optimizing third molar autotransplantation: applications of reverse-engineered surgical templates and rapid prototyping of three-dimensional teeth.

PubMed

Park, Ji-Man; Tatad, Jacquiline Czar I; Landayan, Maria Erika A; Heo, Seong-Joo; Kim, Sun-Jong

2014-09-01

The success of autogenous tooth transplantation depends on the vitality of the periodontal ligament attached to the donor tooth, and its viability decreases when it is exposed extraorally. This report describes the case of a 16-year-old patient in whom a rapid prototyped tooth model was performed using cone-beam technology and a surgical template guide for autotransplantation as an effective technique for a critical time-based procedure. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

P-52 Balloting of Hull and Mechanical Standards

DTIC Science & Technology

1992-05-01

N) 3. We connot allow standards from ASTM to be an excuse for the Industry to go sole source. Unless the vendor whose design Is being used has...safe working load is 400 lbs. vii Nicholas Jerqovich (MARAD) 2. Para 4.1.3. - Recommend that "or capacity" be deleted. 3. Para 5.1.1.6 - Delete " stapler ...material is used for plate? (d) Det.E - is incorrectly drawn. . . . 17. Figs 1 & 2 - (a) Det. "X" & "B" are reversed. . . (b) See Fig.A..... if stapler

Skull reconstruction after resection of bone tumors in a single surgical time by the association of the techniques of rapid prototyping and surgical navigation.

PubMed

Anchieta, M V M; Salles, F A; Cassaro, B D; Quaresma, M M; Santos, B F O

2016-10-01

Presentation of a new cranioplasty technique employing a combination of two technologies: rapid prototyping and surgical navigation. This technique allows the reconstruction of the skull cap after the resection of a bone tumor in a single surgical time. The neurosurgeon plans the craniotomy previously on the EximiusMed software, compatible with the Eximius Surgical Navigator, both from the company Artis Tecnologia (Brazil). The navigator imports the planning and guides the surgeon during the craniotomy. The simulation of the bone fault allows the virtual reconstruction of the skull cap and the production of a personalized modelling mold using the Magics-Materialise (Belgium)-software. The mold and a replica of the bone fault are made by rapid prototyping by the company Artis Tecnologia (Brazil) and shipped under sterile conditions to the surgical center. The PMMA prosthesis is produced during the surgical act with the help of a hand press. The total time necessary for the planning and production of the modelling mold is four days. The precision of the mold is submillimetric and accurately reproduces the virtual reconstruction of the prosthesis. The production of the prosthesis during surgery takes until twenty minutes depending on the type of PMMA used. The modelling mold avoids contraction and dissipates the heat generated by the material's exothermic reaction in the polymerization phase. The craniectomy is performed with precision over the drawing made with the help of the Eximius Surgical Navigator, according to the planned measurements. The replica of the bone fault serves to evaluate the adaptation of the prosthesis as a support for the perforations and the placement of screws and fixation plates, as per the surgeon's discretion. This technique allows the adequate oncologic treatment associated with a satisfactory aesthetic result, with precision, in a single surgical time, reducing time and costs.

Suture-free technique of extravesical ureteroneocystostomy with ring pin stapler: experimental study of canines. I. Preliminary results.

PubMed

Zhou, Feng; Fang, Zhen-Qiang; Zhang, Yuan-Ning; Chen, Wei; Liu, Yong-Liang; Ye, Gang

2010-08-01

To compare the mechanical and sutured ureteroneocystostomy in a canine model. In 18 dogs, extravesical ureteroneocystostomy on 1 side was randomly assigned to end-to-side anastomosis performed with a titanium ring-pin stapler or interrupted absorbable sutures. To create the antireflux tunnel, the longitudinal line of the muscle layer was closed over the implanted ureter with titanium clips or sutures. At 3 months postoperatively, renal ultrasonography, intravenous urography, ascending cystography, the Whitaker test, and the macroscopic and microscopic results were assessed. The ureteroneocystostomy with the ring pin stapler and the antireflux tunnel construction with titanium clips had a 100% technical success rate. Compared with manual suturing anastomosis, the suture-free technique took a significantly shorter time and resulted in slightly, but not significantly, less ureteral obstruction after 3 months. One dog in group 2 had evidence of ureteral dilation and hydronephrosis compared with the normal contralateral side. No signs of stone formation, urinary cyst, or fistulas were found after either closure method. None of the 18 dogs demonstrated vesicoureteral reflux. Histologic examination showed no signs of acute inflammation or marked fibrosis in any of the 18 specimens. Moreover, the intrapelvic pressure in group 1 was approximately similar to that of the normal contralateral side. Ureteroneocystostomy performed with a titanium ring-pin stapler is feasible and faster than using conventional sutures. This suture-free technique is simple and safe, with possibly lower complication rates than a nonstented suture technique. Additional studies with a longer follow-up duration are needed to confirm these results. Copyright 2010. Published by Elsevier Inc.

Minimizing blood loss at cesarean-hysterectomy for placenta previa percreta.

PubMed

Belfort, Michael A; Shamshiraz, Alireza A; Fox, Karin

2017-01-01

Preventing blood loss at the time of a cesarean delivery during a scheduled, nonemergent cesarean hysterectomy for placenta percreta may reduce the need for crystalloid and blood product transfusion. Commonly a classical hysterotomy is created and this can result in as much as a 500-800 mL blood loss before the hysterotomy is closed. Our technique involves placement of 4 full-thickness interrupted sutures in a box pattern to create an unperfused area of upper uterine segment. Diathermy is used to open the uterus to the membranes in the center of the "box" without blood loss. A finger is then inserted between the membranes and uterus to create a space into which 1 side of an 80-mm linear cutting stapler is introduced. The other side of the stapler is then attached and clamped closed, and the stapler is activated. Forward motion of the lever lays down 2 rows of staples, and backward movement of the lever divides the uterine muscle between the 2 staple lines. The stapler is removed and reloaded and reintroduced 1 or 2 times as needed to create an avascular hysterotomy large enough to atraumatically deliver the baby. The membranes are then opened and the baby is delivered. Following this the umbilical cord is clamped and cut without any attempt to remove the placenta, replaced in the uterine cavity, and the hysterotomy is closed with a running locked suture that incorporates the membrane edges. The hysterectomy then proceeds. In most cases there is minimal blood loss (usually <20 mL) from the cesarean delivery. Copyright © 2016 Elsevier Inc. All rights reserved.

Application of 3D Printing in the Surgical Planning of Trimalleolar Fracture and Doctor-Patient Communication.

PubMed

Yang, Long; Shang, Xian-Wen; Fan, Jian-Nan; He, Zhi-Xu; Wang, Jian-Ji; Liu, Miao; Zhuang, Yong; Ye, Chuan

2016-01-01

To evaluate the effect of 3D printing in treating trimalleolar fractures and its roles in physician-patient communication, thirty patients with trimalleolar fractures were randomly divided into the 3D printing assisted-design operation group (Group A) and the no-3D printing assisted-design group (Group B). In Group A, 3D printing was used by the surgeons to produce a prototype of the actual fracture to guide the surgical treatment. All patients underwent open reduction and internal fixation. A questionnaire was designed for doctors and patients to verify the verisimilitude and effectiveness of the 3D-printed prototype. Meanwhile, the operation time and the intraoperative blood loss were compared between the two groups. The fracture prototypes were accurately printed, and the average overall score of the verisimilitude and effectiveness of the 3D-printed prototypes was relatively high. Both the operation time and the intraoperative blood loss in Group A were less than those in Group B (P < 0.05). Patient satisfaction using the 3D-printed prototype and the communication score were 9.3 ± 0.6 points. A 3D-printed prototype can faithfully reflect the anatomy of the fracture site; it can effectively help the doctors plan the operation and represent an effective tool for physician-patient communication.

Animal surgery in microgravity

NASA Technical Reports Server (NTRS)

Campbell, Mark R.; Billica, Roger D.; Johnston, Smith L., III

1993-01-01

Prototype hardware and procedures which could be applied to a surgical support system on SSF are realistically evaluated in microgravity using an animal model. Particular attention is given to the behavior of bleeding in a surgical scenario and techniques for hemostasis and fluid management.

[Auto-suture stapler EEA in surgery of the colon and rectum [author's transl)].

PubMed

Thiede, A; Troidl, H; Poser, H; Jostarndt, L; Hamelmann, H

1980-01-01

The increasing use of auto-suture staplers for gastrointestinal anastomoses makes it necessary to test the value of this new method of suturing. In a "pilot study" the practicability, the tightness and permeability of the anastomosis and complications were tested and analysed in a total of 30 colon and rectal anastomoses using the EEA-suture gun. The results of 14 colon resections and 16 low anterior resections justify the further use of the EEA auto-suture apparatus and raise the question of a prospective controlled random study in which manual and mechanical machine sutured anastomoses are compared.

Linear compared to circular stapler anastomosis in laparoscopic Roux-en-Y gastric bypass leads to comparable weight loss with fewer complications: a matched pair study.

PubMed

Schneider, Romano; Gass, Jörn-Markus; Kern, Beatrice; Peters, Thomas; Slawik, Marc; Gebhart, Martina; Peterli, Ralph

2016-05-01

In the course of laparoscopic Roux-en-Y gastric bypass (LRYGB), a tight gastroenterostomy (GE) may lead to higher weight loss but possibly to an increase of local complications such as strictures and ulcers. Different operative techniques for Roux-en-Y reconstruction may also influence the rate of internal hernias, a typical late complication of LRYGB. The objective of this study was to compare weight loss, rates of strictures, internal hernias, and ulcerations of linear versus circular stapler anastomosis. Retrospective analysis of prospectively collected data in a 3:1-matched pair study. A total of 228 patients with a minimal follow-up of 2 years were matched according to BMI at baseline, age, and gender. The follow-up rate was 100 % at 1 and 2 years postoperatively; the mean follow-up time was 3.8 ± 1.63 years. In group C (circular), 57 patients were operated with a 25-mm circular stapler technique (average BMI 44.7 ± 5.18 kg/m(2), age 44.1 ± 10.8 years, 80.7 % female). In group L (linear), 171 patients were operated using a linear stapler (approximately 30 mm, average BMI 43.8 ± 5.24 kg/m(2), age 43.7 ± 12.5 years, 70.8 % female). A propensity score matching and a logrank test were used for statistical analysis. The average excessive BMI loss (EBMIL) after 1 year was not statistically different (70.6 ± 20.2 % in group C vs 72.5 ± 20.4 % in group L) as well as after 2 years (71.6 ± 22.5 % in group C vs 74.6 ± 19.6 % in group L). The average operation time was 155 ± 53 min in group C and 109 ± 57 min in group L (p = 0.0001). In group L, patients had significantly lower overall stricture rates at the GE compared to group C (0 [0 %] vs. 4 [7 %], p = 0.0004), a lower rate and severity of internal hernias (10 [5.8 %] vs. 7 [12.3 %] p = 0.466), and equal local ulcerations rates (3 [1.8 %] vs. 1 [1.8 %] p = 0.912). Linear stapler anastomosis in LRYGB compared to circular anastomosis leads to equal weight loss and less strictures. The lower rate of internal hernias in linear stapler anastomosis was not significantly different.

Stanford university medical media and information technologies hosts open source surgical simulation workshop.

PubMed

Cornelius, Craig W; Heinrichs, Leroy; Youngblood, Patricia; Dev, Parvati

2007-01-01

Stanford University Medical Media and Information Technologies's technical workshop "Prototyping of Surgical Simulators using Open Source Simulation Software" was held in August 2006 at Stanford University. The objectives, program, and topics covered are presented in this short report.

Low-cost Method for Obtaining Medical Rapid Prototyping Using Desktop 3D printing: A Novel Technique for Mandibular Reconstruction Planning.

PubMed

Velasco, Ignacio; Vahdani, Soheil; Ramos, Hector

2017-09-01

Three-dimensional (3D) printing is relatively a new technology with clinical applications, which enable us to create rapid accurate prototype of the selected anatomic region, making it possible to plan complex surgery and pre-bend hardware for individual surgical cases. This study aimed to express our experience with the use of medical rapid prototype (MRP) of the maxillofacial region created by desktop 3D printer and its application in maxillofacial reconstructive surgeries. Three patients with benign mandible tumors were included in this study after obtaining informed consent. All patient's maxillofacial CT scan data was processed by segmentation and isolation software and mandible MRP was printed using our desktop 3D printer. These models were used for preoperative surgical planning and prebending of the reconstruction plate. MRP created by desktop 3D printer is a cost-efficient, quick and easily produced appliance for the planning of reconstructive surgery. It can contribute in patient orientation and helping them in a better understanding of their condition and proposed surgical treatment. It helps surgeons for pre-operative planning in the resection or reconstruction cases and represent an excellent tool in academic setting for residents training. The pre-bended reconstruction plate based on MRP, resulted in decreased surgery time, cost and anesthesia risks on the patients. Key words: 3D printing, medical modeling, rapid prototype, mandibular reconstruction, ameloblastoma.

Analysis of survival after pancreatic resection for oncological pathologies.

PubMed

Benzoni, Enrico; Rossit, Luca; Cojutti, Alessandro; Favero, Alessandro; Saccomano, Enrico; Zompicchiatti, Aron; Noce, Luigi; Bresadola, Fabrizio; Intini, Sergio

2007-01-01

Surgical treatment of pancreatic cancer is to date the only modality that offers a chance of long-term survival. Potentially curative surgery is an option for only about 15% of patients with pancreatic adenocarcinoma. The aim of this study was to determine the survival and to assess the association of clinical, pathological, and treatment features with survival of patients who underwent resection of pancreatic cancer at the Department of Surgery of Udine University Hospital. From November 1989 to December 2005, 137 consecutive patients, who underwent surgical procedures for pancreatic cancer, were followed in our department. We performed 76 pancreatico-duodenectomy, 26 distal pancreatectomies and 35 total pancreatectomies. The surgical reconstruction after pancreatico-duodenectomy was as follows: 11 closures of the main duct with manual nonabsorbable stitches, 24 closures of the main duct with a linear stapler, 17 occlusions of the main duct with neoprene glue and 24 duct-to-mucosa anastomoses. Mean survival time was 27.7 +/- 26.93 months (mean +/- SD) and mean disease-free survival time was 25.4 +/- 23.06 months (mean +/- SD). 1, 3, 5, 7 and 9-year survival rates were 63.9, 33.7, 21.17, 12.7 and 10.2%, respectively. Significant differences in survival were recorded by the Log-rank test for age > 70 (p = 0.001), surgical procedures (p = 0.00046) and presence of metastases (p = 0.0055) The treatment of pancreatic cancer is undertaken with two different aims. The first is radical surgery for patients with early-stage disease, mainly stage I and partly stage II. In all other cases, the aim of treatment is the palliation of the several distressing symptoms related to this cancer. The standard treatment option for resectable tumours is radical pancreatic resection according to the Whipple procedure or total pancreatectomy.

[Practical and theoretical aspects of cost-benefit relations in viscerosynthesis].

PubMed

Fuchs, K H; Heimbucher, J; Geiger, D; Thiede, A

1997-01-01

The necessity of limiting health care costs requires adequate service recording and quality control even in visceral surgery. In this field, the safety of the anastomoses is of greatest importance. Anastomoses at risk are esophageal connections to jejunum or colon and deep rectal anastomoses. At these locations expensive suture devices, such as stapling instruments, can be used in a cost saving aspect, if they help to increase anastomotic safety, time saving and expansion of surgical indication. Manual sutures thus represent the cheapest anastomotic technique as continuous sutures would cost between DM 10.- to 20.- and single stitch sutures between DM 60.- and 100.-. A surgical school should prevalently aim at training manual anastomoses, while special anastomotic techniques should only complete the skill for selected indications. The overall staff expenditure for extended operations amounts around DM 600.- per hour respectively DM 10.- per minute. Time for surgery might be shortened by auxiliary tools as much as to perform an additional operation. However, a circular stapler anastomosis that costs between DM 650.- to 850.- is twice as expensive as manual sutures notwithstanding the double time needed. In the past years, the necessity for a rational use of different anastomotic techniques has shown to be mandatory since, increasingly, financial aspects of health economy require cost benefit calculations in visceral surgery.

Prospective experimental study of transrectal viscerotomy closure using transanal endoscopic suture vs. circular stapler: a step toward NOTES.

PubMed

Diana, M; Leroy, J; Wall, J; De Ruijter, V; Lindner, V; Dhumane, P; Mutter, D; Marescaux, J

2012-06-01

Endoluminal full-thickness closure of the rectal wall is critical in emerging procedures including endoscopic submucosal dissection and transrectal natural orifice transluminal endoscopic surgery (NOTES). This study aimed to compare manual suture using the transanal endoscopic operation platform (TEO; Karl Storz, Tüttlingen, Germany) with the end-to-end anastomosis hemorrhoid circular stapler (EEA; Covidien, Dublin, Ireland) for closure of the rectal viscerotomy during transrectal NOTES segmental colectomy. A total of 12 swine underwent transrectal hybrid NOTES partial colectomies. Animals were divided into two groups according to the viscerotomy closure technique: 1) TEO manual suture; 2) EEA circular stapler closure. Mean (± SD) viscerotomy closure time was 67.5 ± 59.5 minutes and 31.5 ± 19.6 minutes for TEO and EEA, respectively. There was one conversion to laparoscopy in the TEO group and a misfiring in the EEA group that required a TEO salvage suture. There was one positive air-leak test in each group. Peritoneal fluid collected at the end of the procedure tested positive for bacterial contamination in all cases. A mild stenosis was present in 4 /6 viscerotomies (67 %) in the TEO group and in 1/6 (17 %) in the EEA group on endoscopic control. Inflammatory changes were mild in 3/5 (60 %) and 4/5 (80 %) viscerotomies in the TEO and EEA groups, respectively, whereas severe inflammation was found in 2/5 (TEO) and 1 /5 (EEA). Transrectal viscerotomy closure using the EEA circular stapler technique is feasible, easy to perform, and histologically comparable to suture closure through a TEO platform. It may offer an attractive alternative for NOTES segmental colectomies and endoscopic resections. © Georg Thieme Verlag KG Stuttgart · New York.

An option for delta-shaped gastroduodenostomy in totally laparoscopic distal gastrectomy for gastric cancer: A single-layer suturing technique for the stapler entry hole using knotless barbed sutures combined with the application of additional knotted sutures.

PubMed

Tokuhara, Takaya; Nakata, Eiji; Tenjo, Toshiyuki; Kawai, Isao; Kondo, Keisaku; Ueda, Hirofumi; Tomioka, Atsushi

2018-01-01

We report an option for delta-shaped gastroduodenostomy in totally laparoscopic distal gastrectomy (TLDG) for gastric cancer. We detail a single-layer suturing technique for the endoscopic linear stapler entry hole using knotless barbed sutures combined with the application of additional knotted sutures. From June 2013 to February 2017, we performed TLDG with delta-shaped gastroduodenostomy in 20 patients with gastric cancer. The linear stapler was closed and fired to attach the posterior walls of the remnant stomach and the duodenum together. After creating a good view of the greater curvature side of the entry hole for the stapler by retracting the knotted suture on the lesser curvature side toward the ventral side, we performed single-layer entire-thickness continuous suturing of this hole using a 15-cm-long barbed suture running from the greater curvature side to the lesser curvature side. We placed the second and third stitches between the seromuscular layer of the remnant stomach and the entire-thickness layer of the duodenum while suturing the duodenal mucosa as minutely as possible. In addition, we routinely added one or two entire-thickness knotted sutures at the site near the greater curvature side. We placed similar additional knotted sutures at the site with a broad pitch. TLDG with this reconstruction technique was successfully performed in all patients with no occurrences of anastomotic leakage or intraabdominal abscess around the anastomosis. It is suggested that this method can be one option for delta-shaped gastroduodenostomy in TLDG due to its cost-effectiveness and feasibility.

An option for delta-shaped gastroduodenostomy in totally laparoscopic distal gastrectomy for gastric cancer: A single-layer suturing technique for the stapler entry hole using knotless barbed sutures combined with the application of additional knotted sutures

PubMed Central

Tokuhara, Takaya; Nakata, Eiji; Tenjo, Toshiyuki; Kawai, Isao; Kondo, Keisaku; Ueda, Hirofumi; Tomioka, Atsushi

2018-01-01

We report an option for delta-shaped gastroduodenostomy in totally laparoscopic distal gastrectomy (TLDG) for gastric cancer. We detail a single-layer suturing technique for the endoscopic linear stapler entry hole using knotless barbed sutures combined with the application of additional knotted sutures. From June 2013 to February 2017, we performed TLDG with delta-shaped gastroduodenostomy in 20 patients with gastric cancer. The linear stapler was closed and fired to attach the posterior walls of the remnant stomach and the duodenum together. After creating a good view of the greater curvature side of the entry hole for the stapler by retracting the knotted suture on the lesser curvature side toward the ventral side, we performed single-layer entire-thickness continuous suturing of this hole using a 15-cm-long barbed suture running from the greater curvature side to the lesser curvature side. We placed the second and third stitches between the seromuscular layer of the remnant stomach and the entire-thickness layer of the duodenum while suturing the duodenal mucosa as minutely as possible. In addition, we routinely added one or two entire-thickness knotted sutures at the site near the greater curvature side. We placed similar additional knotted sutures at the site with a broad pitch. TLDG with this reconstruction technique was successfully performed in all patients with no occurrences of anastomotic leakage or intraabdominal abscess around the anastomosis. It is suggested that this method can be one option for delta-shaped gastroduodenostomy in TLDG due to its cost-effectiveness and feasibility. PMID:29375711

Securing the appendiceal stump with the Gea extracorporeal sliding knot during laparoscopic appendectomy is safe and economical.

PubMed

Arcovedo, R; Barrera, H; Reyes, H S

2007-10-01

Laparoscopic appendectomy (LA) has become very popular. One criticism of this approach is the high cost of the disposable equipment such as the linear stapler. An alternative would be suture ligation of the appendiceal base. To prove the safety of the Gea extracorporeal sliding knot (GESK) for closure of the stump after LA, a retrospective study was conducted. For this study, 63 LA procedures performed by one surgeon using the Gea knot (group A) were reviewed and compared with 63 LA procedures performed by two other surgeons (group B) using the linear stapler. The GESK is created with 0-prolene in the manner already described. The main variable was the presence or absence of blowout, leak, or fistula from the appendiceal stump. The secondary variables were abdominal abscess, wound infection, and need for readmission or reoperation. The results were analyzed using the appropriate statistical methods. Both groups were similar in terms of age, gender, and pathologic diagnosis. No patient in group A or B experienced a colonic fistula, stump blowout, or leak. In group A, one patient experienced interloop abscesses. There were two wound infections. In group B, one patient experienced a wound infection, and another patient had a wound dehiscence of the umbilical port, which required reoperation. No statistical differences were noted between the two groups. There are surgeons who routinely use sutures to secure the stump of the appendectomy. This study aimed to demonstrate that the GESK is as secure as the stapler for closure of the appendiceal stump. The GESK could be passed through a 5-mm trocar, potentially avoiding complications of a larger trocar site. The GESK seems to be an economic and safe alternative to the stapler.

A Novel Roux-en-Y Reconstruction Involving the Use of Two Circular Staplers after Distal Subtotal Gastrectomy for Gastric Cancer.

PubMed

Hur, Hoon; Ahn, Chang Wook; Byun, Cheul Su; Shin, Ho Jung; Kim, Young Bae; Son, Sang-Yong; Han, Sang-Uk

2017-09-01

Although Roux-en-Y (R-Y) reconstruction after distal gastrectomy has several advantages, such as prevention of bile reflux into the remnant stomach, it is rarely used because of the technical difficulty. This prospective randomized clinical trial aimed to show the efficacy of a novel method of R-Y reconstruction involving the use of 2 circular staplers by comparing this novel method to Billroth-I (B-I) reconstruction. A total of 118 patients were randomly allocated into the R-Y (59 patients) and B-I reconstruction (59 patients) groups. R-Y anastomosis was performed using two circular staplers and no hand sewing. The primary end-point of this clinical trial was the reflux of bile into the remnant stomach evaluated using endoscopic and histological findings at 6 months after surgery. No significant differences in clinicopathological findings were observed between the 2 groups. Although anastomosis time was significantly longer for the patients of the R-Y group (P<0.001), no difference was detected between the 2 groups in terms of the total surgery duration (P=0.112). Endoscopic findings showed a significant reduction of bile reflux in the remnant stomach in the R-Y group (P<0.001), and the histological findings showed that reflux gastritis was more significant in the B-I group than in the R-Y group (P=0.026). The results of this randomized controlled clinical trial showed that compared with B-I reconstruction, R-Y reconstruction using circular staplers is a safe and feasible procedure. This clinical trial study was registered at www.ClinicalTrials.gov (registration No. NCT01142271).

Accuracy of templates for navigated implantation made by rapid prototyping with DICOM datasets of cone beam computer tomography (CBCT).

PubMed

Weitz, Jochen; Deppe, Herbert; Stopp, Sebastian; Lueth, Tim; Mueller, Steffen; Hohlweg-Majert, Bettina

2011-12-01

The aim of this study is to evaluate the accuracy of a surgical template-aided implant placement produced by rapid prototyping using a DICOM dataset from cone beam computer tomography (CBCT). On the basis of CBCT scans (Sirona® Galileos), a total of ten models were produced using a rapid-prototyping three-dimensional printer. On the same patients, impressions were performed to compare fitting accuracy of both methods. From the models made by impression, templates were produced and accuracy was compared and analyzed with the rapid-prototyping model. Whereas templates made by conventional procedure had an excellent accuracy, the fitting accuracy of those produced by DICOM datasets was not sufficient. Deviations ranged between 2.0 and 3.5 mm, after modification of models between 1.4 and 3.1 mm. The findings of this study suggest that the accuracy of the low-dose Sirona Galileos® DICOM dataset seems to show a high deviation, which is not useable for accurate surgical transfer for example in implant surgery.

Reconstruction of the esophagojejunostomy by double stapling method using EEA™ OrVil™ in laparoscopic total gastrectomy and proximal gastrectomy

PubMed Central

2011-01-01

Here we report the method of anastomosis based on double stapling technique (hereinafter, DST) using a trans-oral anvil delivery system (EEATM OrVilTM) for reconstructing the esophagus and lifted jejunum following laparoscopic total gastrectomy or proximal gastric resection. As a basic technique, laparoscopic total gastrectomy employed Roux-en-Y reconstruction, laparoscopic proximal gastrectomy employed double tract reconstruction, and end-to-side anastomosis was used for the cut-off stump of the esophagus and lifted jejunum. We used EEATM OrVilTM as a device that permitted mechanical purse-string suture similarly to conventional EEA, and endo-Surgitie. After the gastric lymph node dissection, the esophagus was cut off using an automated stapler. EEATM OrVilTM was orally and slowly inserted from the valve tip, and a small hole was created at the tip of the obliquely cut-off stump with scissors to let the valve tip pass through. Yarn was cut to disconnect the anvil from a tube and the anvil head was retained in the esophagus. The end-Surgitie was inserted at the right subcostal margin, and after the looped-shaped thread was wrapped around the esophageal stump opening, assisting Maryland forceps inserted at the left subcostal and left abdomen were used to grasp the left and right esophageal stump. The surgeon inserted anvil grasping forceps into the right abdomen, and after grasping the esophagus with the forceps, tightened the end Surgitie, thereby completing the purse-string suture on the esophageal stump. The main unit of the automated stapler was inserted from the cut-off stump of the lifted jejunum, and a trocar was made to pass through. To prevent dropout of the small intestines from the automated stapler, the automated stapler and the lifted jejunum were fastened with silk thread, the abdomen was again inflated, and the lifted jejunum was led into the abdominal cavity. When it was confirmed that the automated stapler and center rod were made completely linear, the anvil and the main unit were connected with each other and firing was carried out. Then, DST-based anastomosis was completed with no dog-ear. The method may facilitate safe laparoscopic anastomosis between the esophagus and reconstructed intestine. This is also considered to serve as a useful anastomosis technique for upper levels of the esophagus in laparotomy. PMID:21599911

Low-cost Method for Obtaining Medical Rapid Prototyping Using Desktop 3D printing: A Novel Technique for Mandibular Reconstruction Planning

PubMed Central

Vahdani, Soheil; Ramos, Hector

2017-01-01

Background Three-dimensional (3D) printing is relatively a new technology with clinical applications, which enable us to create rapid accurate prototype of the selected anatomic region, making it possible to plan complex surgery and pre-bend hardware for individual surgical cases. This study aimed to express our experience with the use of medical rapid prototype (MRP) of the maxillofacial region created by desktop 3D printer and its application in maxillofacial reconstructive surgeries. Material and Methods Three patients with benign mandible tumors were included in this study after obtaining informed consent. All patient’s maxillofacial CT scan data was processed by segmentation and isolation software and mandible MRP was printed using our desktop 3D printer. These models were used for preoperative surgical planning and prebending of the reconstruction plate. Conclusions MRP created by desktop 3D printer is a cost-efficient, quick and easily produced appliance for the planning of reconstructive surgery. It can contribute in patient orientation and helping them in a better understanding of their condition and proposed surgical treatment. It helps surgeons for pre-operative planning in the resection or reconstruction cases and represent an excellent tool in academic setting for residents training. The pre-bended reconstruction plate based on MRP, resulted in decreased surgery time, cost and anesthesia risks on the patients. Key words:3D printing, medical modeling, rapid prototype, mandibular reconstruction, ameloblastoma. PMID:29075412

Validation of a fibula graft cutting guide for mandibular reconstruction: experiment with rapid prototyping mandible model.

PubMed

Lim, Se-Ho; Kim, Yeon-Ho; Kim, Moon-Key; Nam, Woong; Kang, Sang-Hoon

2016-12-01

We examined whether cutting a fibula graft with a surgical guide template, prepared with computer-aided design/computer-aided manufacturing (CAD/CAM), would improve the precision and accuracy of mandibular reconstruction. Thirty mandibular rapid prototype (RP) models were allocated to experimental (N = 15) and control (N = 15) groups. Thirty identical fibular RP models were assigned randomly, 15 to each group. For reference, we prepared a reconstructed mandibular RP model with a three-dimensional printer, based on surgical simulation. In the experimental group, a stereolithography (STL) surgical guide template, based on simulation, was used for cutting the fibula graft. In the control group, the fibula graft was cut manually, with reference to the reconstructed RP mandible model. The mandibular reconstructions were compared to the surgical simulation, and errors were calculated for both the STL surgical guide and the manual methods. The average differences in three-dimensional, minimum distances between the reconstruction and simulation were 9.87 ± 6.32 mm (mean ± SD) for the STL surgical guide method and 14.76 ± 10.34 mm (mean ± SD) for the manual method. The STL surgical guide method incurred less error than the manual method in mandibular reconstruction. A fibula cutting guide improved the precision of reconstructing the mandible with a fibula graft.

Clinical feasibility and efficacy of using virtual surgical planning in bimaxillary orthognathic surgery without intermediate splint.

PubMed

Li, Yunfeng; Jiang, Yangmei; Zhang, Nan; Xu, Rui; Hu, Jing; Zhu, Songsong

2015-03-01

Computer-aided jaw surgery has been extensively studied recently. The purpose of this study was to determine the clinical feasibility of performing bimaxillary orthognathic surgery without intermediate splint using virtual surgical planning and rapid prototyping technology. Twelve consecutive patients who underwent bimaxillary orthognathic surgery were included. The presented treatment plan here mainly consists of 6 procedures: (1) data acquisition from computed tomography (CT) of the skull and laser scanning of the dentition; (2) reconstruction and fusion of a virtual skull model with accurate dentition; (3) virtual surgery simulation including osteotomy and movement and repositioning of bony segments; (4) final surgical splint fabrication (no intermediate splint) using computer-aided design and rapid prototyping technology; (5) transfer of the virtual surgical plan to the operating room; and (6) comparison of the actual surgical outcome to the virtual surgical plan. All procedures of the treatment were successfully performed on all 12 patients. In quantification of differences between simulated and actual postoperative outcome, we found that the mean linear difference was less than 1.8 mm, and the mean angular difference was less than 2.5 degrees in all evaluated patients. Results from this study suggested that it was feasible to perform bimaxillary orthognathic surgery without intermediate splint. Virtual surgical planning and the guiding splints facilitated the diagnosis, treatment planning, accurate osteotomy, and bony segments repositioning in orthognathic surgery.

A case report of laparoscopic duodenal atresia repair in a neonate using a novel miniature stapling device.

PubMed

Boo, Yoon Jung; Gödeke, Jan; Engel, Veronika; Muensterer, Oliver J

2017-01-01

Laparoscopic duodenal atresia repair is an advanced procedure performed in select pediatric surgical centers. Recently, sub-6mm endosurgical staplers have been introduced, facilitating and accelerating the creation of intracorporeal intestinal anastomoses. We performed a laparoscopic duodenojejunostomy in a one-day-old child with duodenal atresia due to annular pancreas using a novel 5.8mm articulating endostapler with excellent outcome. The technical details are reported. Laparoscopic duodenojejunostomy is a technically demanding procedure due to difficulty in hand-sewn anastomosis in a small and restricted space. With this novel 5.8mm articulating endostapler, we were able to perform a quicker and easier anastomosis. We report a case of laparoscopic duodenal atresia repair in a neonate using a novel miniature stapling device. This new technique is a safe, quick and easier way to perform laparoscopic duodenal atresia repair. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Anesthetic management of the SRS™ Endoscopic Stapling System for gastro-esophageal reflux disease.

PubMed

Topuz, Ufuk; Umutoglu, Tarik; Bakan, Mefkur; Ozturk, Erdogan

2013-01-14

The SRS(TM) Endoscopic Stapling System (Medigus, Tel Aviv, Israel) is a new tool capable of creating a totally endoscopic fundoplication, combined with an endoscope, endoscopic ultrasound and a surgical stapler. SRS(TM) endoscopic stapling for gastro-esophageal reflux disease is a minimally invasive, outpatient procedure, which requires general anesthesia with positive-pressure ventilation. Keeping the patient on positive end-expiratory pressure (PEEP) may minimize the pressure gradient between the esophagus and the mediastinum, as well as help to prevent air from leaking around the screws and causing pneumomediastinum. In addition, in patients with hiatal hernia, higher PEEP levels may be required to increase intra-thoracic pressure and to force the stomach to slide into the abdomen for ease of endoscopy. We advise smoother emergence from anesthesia, taking precautions for retching, postoperative nausea and vomiting (PONV), while coughing and gagging during extubation and PONV may affect the success of the procedure. Total intravenous anesthesia with propofol and remifentanil seems to be a good choice for these reasons.

Stapled haemorrhoidopexy: a consensus position paper by an international working party - indications, contra-indications and technique.

PubMed

Corman, M L; Gravié, J-F; Hager, T; Loudon, M A; Mascagni, D; Nyström, P-O; Seow-Choen, F; Abcarian, H; Marcello, P; Weiss, E; Longo, A

2003-07-01

An international working party with experience in the performance of an alternative haemorrhoid operation through the use of the circular stapler was convened for the purpose of developing a consensus as to the criteria for undertaking this procedure. The agenda consisted of first, naming the operation; second, the indications and contra-indications for its performance; and third, the preferred surgical technique. Among the recommendations for individuals who plan to embark on this surgery are that experience with anorectal surgery and an understanding of anorectal anatomy are requisites; experience with circular stapling devices is essential; and the surgeon must attend a formal course which should include lectures, videos, the application of the instrument in models, and observation of the operation as performed by a surgeon recognized by his or her peers-leading ultimately to undertaking the procedure while being observed by an experienced surgeon. Following satisfactory completion of the above, independent responsibility should be determined by an individual's department of surgery.

Totally laparoscopic pylorus-preserving gastrectomy for early gastric cancer in the middle stomach: technical report and surgical outcomes.

PubMed

Kumagai, Koshi; Hiki, Naoki; Nunobe, Souya; Sekikawa, Sayuri; Chiba, Takehiro; Kiyokawa, Takashi; Jiang, Xiaohua; Tanimura, Shinya; Sano, Takeshi; Yamaguchi, Toshiharu

2015-01-01

The feasibility, safety, and improved quality of postoperative life following laparoscopy-assisted pylorus-preserving gastrectomy (LAPPG) with a hand-sewn anastomosis via a mini-laparotomy for early gastric cancer (EGC) have been previously established. Here we describe the surgical procedure of totally laparoscopic pylorus-preserving gastrectomy (TLPPG) using an intracorporeal delta-shaped anastomosis technique, and the short-term surgical outcomes of 60 patients with EGC in the middle stomach are reported. After lymphadenectomy and mobilization of the stomach, intraoperative gastroscopy was performed in order to verify the location of the tumor, and then the distal and proximal transecting lines were established, 5 cm from the pyloric ring and just proximal to Demel's line, respectively. Following transection of the stomach, a delta-shaped intracorporeal gastrogastrostomy was made with linear staplers. There were no intraoperative complications or conversions to open surgery. Mean operation time and blood loss were 259 min and 28 mL, respectively. Twelve patients (20.0%) experienced postoperative complications classified as grade II using the Clavien-Dindo classification, with the most frequent complication being gastric stasis (6 cases, 10.0 %). The incidence of severe complications classified as grade III or above was 1.7%; only one patient required reoperation and intensive care due to postoperative intraabdominal bleeding and subsequent multiple organ failure. TLPPG with an intracorporeal delta-shaped anastomosis was found to be a safe procedure, although it tended to require a longer operating time than the well-established LAPPG with a hand-sewn gastrogastrostomy.

Outcomes of mechanical stapling for postlaryngectomy open pharyngotomy closure.

PubMed

Paddle, Paul; Husain, Inna; McHugh, Lauren; Franco, Ramon

2017-03-01

A total laryngectomy (TL) is performed as a primary or salvage therapy for laryngeal carcinoma. Pharyngotomy closure after TL is typically performed using manual sutures. Automatic stapling devices are routinely used in thoracoabdominal surgery, but have not been widely accepted for use in pharyngotomy closure. Previously described closed stapling techniques of pharyngeal closure do not allow direct evaluation of surgical margins and are limited to endolaryngeal disease. We describe an open technique for pharyngotomy closure using a mechanical stapling device. Retrospective review. A review was conducted of 16 total laryngectomies performed from May 2008 to August 2015 utilizing an Ethicon Endopath ETS Compact-Flex 45 stapler. Sixteen patients (15 male, one female), mean age 69 years, received open TL (14 salvage, two primary) with endostapler pharyngeal closure and primary tracheoesophageal puncture (TEP). Surgical time averaged 218 minutes. Median time to swallowing was 4 days (range, 2-240 days) and mean hospital stay 6 days (range, 3-10 days). Fistula incidence was 31% (5/16) overall and 36% (5/14) in the postradiation patients. Mechanical stapling is a simple method for postlaryngectomy open pharyngotomy closure. This technique allows evaluation of margins, easy primary TEP, and the opportunity for early swallowing and shorter hospital stays. In addition, it can be performed for closure of salvage laryngectomies with rates of fistula formation similar to that found in the literature using suture closure techniques. Future studies are necessary to compare oncological results and surgical complications between the open and closed stapling techniques and to traditional suture closure. 4 Laryngoscope, 127:605-610, 2017. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

An alternative continence tube for continent urinary reservoirs: evaluation of surgical technique, pressure and continence study in an ex-vivo model.

PubMed

Honeck, Patrick; Michel, Maurice Stephan; Trojan, Lutz; Alken, Peter

2009-02-01

Despite the large number of surgical techniques for continent cutaneous diversion described in literature, the creation of a reliable, continent and easily catheterizable continence mechanism remains a complex surgical procedure. Aim of this study was the evaluation of a new method for a catheterizable continence mechanism using stapled pig intestine. Small and large pig intestines were used for construction. A 3 or 6 cm double row stapling system was used. Three variations using small and large intestine segments were constructed. A 3 or 6 cm long stapler line was placed alongside a 12 Fr catheter positioned at the antimesenterial side creating a partially two-luminal segment. Construction time for the tube was measured. The created tube was then embedded into the pouch. Pressure evaluation of the continence mechanism was performed for each variation. Intermittent external manual compression was used to simulate sudden pressure exposure. All variations were 100% continent under filling volumes of up to 700 ml and pressure levels of 58 +/- 6 cm H(2)O for large intestine and 266 ml and 87 +/- 18 cm H(2)O for small intestine, respectively. With further filling above the mentioned capacity suture insufficiency occurred but no tube insufficiency. Construction time for all variations was less than 12 min. The described technique is an easy and fast method to construct a continence mechanism using small or large intestine. Our ex vivo experiments have shown sufficient continence situation in an ex-vivo model. Further investigations in an in-vivo model are needed to confirm these results.

HyBAR: hybrid bone-attached robot for joint arthroplasty.

PubMed

Song, S; Mor, A; Jaramaz, B

2009-06-01

A number of small bone-attached surgical robots have been introduced to overcome some disadvantages of large stand-alone surgical robots. In orthopaedics, increasing demand on minimally invasive joint replacement surgery has also been encouraging small surgical robot developments. Among various technical aspects of such an approach, optimal miniaturization that maintains structural strength for high speed bone removal was investigated. By observing advantages and disadvantages from serial and parallel robot structures, a new hybrid kinematic configuration was designed for a bone-attached robot to perform precision bone removal for cutting the femoral implant cavity during patellofemoral joint arthroplasty surgery. A series of experimental tests were conducted in order to evaluate the performance of the new robot, especially with respect to accuracy of bone preparation. A miniaturized and rigidly-structured robot prototype was developed for minimally invasive bone-attached robotic surgery. A new minimally invasive modular clamping system was also introduced to enhance the robotic procedure. Foam and pig bone experimental results demonstrated a successful implementation of the new robot that eliminated a number of major design problems of a previous prototype. For small bone-attached surgical robots that utilize high speed orthopaedic tools, structural rigidity and clamping mechanism are major design issues. The new kinematic configuration using hinged prismatic joints enabled an effective miniaturization with good structural rigidity. Although minor problems still exist at the prototype stage, the new development would be a significant step towards the practical use of such a robot.

Robotic anatomic segmentectomy of the lung: technical aspects and initial results.

PubMed

Pardolesi, Alessandro; Park, Bernard; Petrella, Francesco; Borri, Alessandro; Gasparri, Roberto; Veronesi, Giulia

2012-09-01

Robotic lobectomy with radical lymph node dissection is a new frontier of minimally invasive thoracic surgery. Series of sublobar anatomic resection for primary initial lung cancers or for metastasis using video-assisted thoracic surgery have been reported but no cases have been so far reported using the robot-assisted approach. We present the technique and surgical outcome of our initial experience. Clinical data of patients undergoing robotic lung anatomic segmentectomy were retrospectively reviewed. All cases were done using the DaVinci System. A 3- or 4-incision strategy with a 3-cm utility incision in the anterior fourth or fifth intercostal space was performed. Individual ligation and division of the hilar structures was performed using Hem-o-Lok (Teleflex Medical, Research Triangle Park, NC) or endoscopic staplers. The parenchyma was transected with endovascular staplers introduced by the bedside assistant mainly through the utility incision. Systematic mediastinal lymph node dissection or sampling was performed. From 2008 to 2010, 17 patients underwent a robot-assisted lung anatomic segmentectomy in two centers. There were 10 women and 7 men with a mean age of 68.2 years (range, 32 to 82). Mean duration of surgery was 189 minutes. There were no major intraoperative complications. Conversion to open procedure was never required. Postoperative morbidity rate was 17.6% with pneumonia in 1 case and prolonged air leaks in 2 patients. Median postoperative stay was 5 days (range, 2 to 14), and postoperative mortality was 0%. Final pathology was non-small cell lung cancer in 8 patient, typical carcinoids in 2, and lung metastases in 7. Robotic anatomic lung segmentectomy is feasible and safe procedure. Robotic system, by improving ergonomic, surgeon view and precise movements, may make minimally invasive segmentectomy easier to adopt and perform. Copyright © 2012 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Technical and early outcomes of Ivor Lewis minimally invasive oesophagectomy for gastric tube construction in the thoracic cavity

PubMed Central

Wu, Weibing; Zhu, Quan; Chen, Liang; Liu, Jinyuan

2014-01-01

OBJECTIVES Ivor Lewis minimally invasive oesophagectomy (ILMIE) is a complex surgery aiming to remove an oesophageal tumour and to create a new gastric tube in the abdomen. The objective was to assess the technical and early outcomes of ILMIE for gastric tube construction in the thoracic cavity. METHODS A retrospective analysis was conducted in 25 middle or lower oesophageal cancer patients treated with ILMIE between August and December 2012. A gastric tube was constructed in the thoracic cavity in all patients. The gastric tube and the oesophagus were anastomosed using a circular stapler. Clinical data (age, gender, pathological pattern and TNM stage), surgical data (operation time, intraoperative blood loss and intraoperative complications) and follow-up data (postoperative complications, length of stay, thoracic tube drainage time and time before eating) were assessed. RESULTS The mean age was 61 ± 8 years. Sixteen patients were male and 9 were female. Oesophageal cancer was located in the middle oesophagus in 5 cases and in the lower oesophagus in 20. No conversion to open surgery was performed. The mean operative time and intraoperative blood loss were 320 ± 63 min and 137 ± 95 ml, respectively. A mean of 2.4 ± 0.5 linear stapler cartridges was used per patient. A mean of 14.6 ± 5.4 lymph nodes was dissected per patient. Postoperative hospital stay was 13.2 ± 2.4 days. Intraoperative and postoperative complications occurred in 12% (3 of 25) and 20% (5 of 25) of patients, respectively, including 1 case of anastomotic fistula. The patients were followed up for a mean of 3.5 ± 1.2 months, and there was no relapse or death. CONCLUSIONS The construction of a gastric tube through the thoracic cavity using ILMIE is feasible and safe in patients with middle or lower oesophageal cancer. However, longer follow-up and larger sample sizes are needed to evaluate the oncological efficacy. PMID:24144805

Significantly Elevated C-Reactive Protein Levels After Epicardial Clipping of the Left Atrial Appendage.

PubMed

Verberkmoes, Niels J; Akca, Ferdi; Vandevenne, Ann-Sofie; Jacobs, Luuk; Soliman Hamad, Mohamed A; van Straten, Albert H M

Besides mechanical and anatomical changes of the left atrium, epicardial closure of the left atrial appendage has also possible homeostatic effects. The aim of this study was to assess whether epicardial clipping of the left atrial appendage has different biochemical effects compared with complete removal of the left atrial appendage. Eighty-two patients were included and underwent a totally thoracoscopic AF ablation procedure. As part of the procedure, the left atrial appendage was excluded with an epicardial clip (n = 57) or the left atrial appendage was fully amputated with an endoscopic vascular stapler (n = 25). From all patients' preprocedural and postprocedural blood pressure, electrolytes and inflammatory parameters were collected. The mean age and left atrial volume index were comparable between the epicardial clip and stapler group (64 ± 8 years vs. 60 ± 9 years, P = non-significant; 44 ± 15 mL/m vs. 40 ± 13 mL/m, P = non-significant). Patients receiving left atrial appendage clipping had significantly elevated C-reactive protein levels compared with patients who had left atrial appendage stapling at the second, third, and fourth postoperative day (225 ± 84 mg/L vs. 149 ± 76 mg/L, P = 0.002, 244 ± 78 vs. 167 ± 76, P = 0.004, 190 ± 74 vs. 105 ± 48, P < 0.001, respectively). Patients had a significant decrease in sodium levels, systolic, and diastolic blood pressure at 24 and 72 hours after left atrial appendage closure. However, this was comparable for both the left atrial appendage clipping and stapling group. Increased activation of the inflammatory response was observed after left atrial appendage clipping compared with left atrial appendage stapling. Furthermore, a significant decrease in blood pressure was observed after surgical removal of the left atrial appendage. Whether the inflammatory response affects the outcome of arrhythmia surgery needs to be further evaluated.

Advances in circular stapling technique for gastric bypass: transoral placement of the anvil.

PubMed

Nguyen, Ninh T; Hinojosa, Marcelo W; Smith, Brian R; Reavis, Kevin M; Wilson, Samuel E

2008-05-01

In Roux-en-Y gastric bypass, construction of the gastrojejunostomy is commonly performed using a circular stapler. The initial description for placement of the anvil was via the transoral approach. Although the concept was ingenious, technical difficulty was encountered during passage resulting in complications such as hypopharyngeal perforation and esophageal mucosal injury. As a result, most surgeons subsequently changed their route of anvil placement to the transabdominal approach. Advances in stapler technology now allow the head of the anvil to be pre-tilted, permitting transoral introduction with greater ease and safety. This paper describes this improved method for transoral placement of the anvil during laparoscopic gastric bypass and reoperative bariatric surgery.

Low-cost biportal endoscopic surgery for primary spontaneous pneumothorax

PubMed Central

Luo, Yuzhong; Yang, Xiaoping; Mo, Shaoxiong; Wu, Jun; Wei, Yitong

2015-01-01

Background Like many other countries, including the United States, China faces the problem of rising health care costs, which have become a heavy burden on the state and individuals. Endoscopic surgery offers many benefits. However, the need for more expensive endoscopic consumables brings further high medical costs. Therefore, the development of video-assisted thoracic surgery with no disposable consumables will help to control medical cost escalation. Methods Between October 2011 and September 2014, a series of 66 patients with primary spontaneous pneumothorax underwent hand ligation of blebs under biportal video-assisted thoracoscopic surgery or bullectomy with stapler during triportal video-assisted thoracoscopic surgery. After treatment of blebs, pleural abrasion was performed with an electrocautery cleaning pad. Results Compared with the group treated by bullectomy with stapler, we found a significant reduction in postoperative costs in the group with bleb ligation. There was no difference in operating time, chest tube drainage, and postoperative stay between the two groups. The follow-up period varied from 1 to 35 months and six cases of recurrence were noted. Conclusions The technique that we described appears to offer better economic results than bullectomy with a stapler under three-port video-assisted thoracoscopic surgery for treating primary spontaneous. The clinical outcomes are similar. PMID:25973237

Laparoscopic transgastric circumferential stapler-assisted versus endoscopic esophageal mucosectomy in a porcine model

PubMed Central

Steinemann, Daniel C.; Zerz, Andreas; Müller, Philip C.; Sauer, Peter; Schaible, Anja; Lasitschka, Felix; Schwarz, Anne-Catherine; Müller-Stich, Beat P.; Linke, Georg R.

2018-01-01

Background and study aims Extensive endoscopic mucosal resection (EMR) for Barrett’s esophagus (BE) may lead to stenosis. Laparoscopic, transgastric, stapler-assisted mucosectomy (SAM) retrieving circumferential specimens is proposed. Methods SAM was evaluated in two phases. The feasibility of SAM and the quality of specimens was assessed in eight animals. The mucosal healing was evaluated in a 6-weeks survival experiment comparing SAM (n=6) and EMR (n=6). The ratio of the esophageal lumen width (REL) at the resection level measured in fluoroscopy after 6-weeks divided by the width immediately after resection was compared. Results In all animals a circular mucosectomy specimen was successfully obtained with an area of 492(426-573)mm2 and 941(813-1209)mm2 using a 21-mm and 25-mm stapler, respectively. In the survival experiments two animals developed symptomatic stenosis after EMR and none after SAM. The REL was 0.27[0.18-0.39] and 0.96[0.9-1.04] (p<0.0001) for EMR and SAM, respectively. Conclusions SAM provides a novel technique for en-bloc mucosectomy in BE. In contrast to EMR mucosal healing in SAM was not associated with stenosis up to six weeks after intervention. PMID:28301879

No evidence that manual closure of the bronchial stump has a lower failure rate than mechanical stapler closure following anatomical lung resection.

PubMed

Zakkar, Mustafa; Kanagasabay, Robin; Hunt, Ian

2014-04-01

A best evidence topic in cardiothoracic surgery was written according to a structured protocol. The question addressed was whether manual closure of the bronchial stump is safer with lower failure rates than mechanical closure using a stapling device following anatomical lung resection. One hundred and twenty-nine papers were identified using the search below. Eight papers presented the best evidence to answer the clinical question as they included sufficient number of patients to reach conclusions regarding the issues of interest for this review. Complications, complication rates and operation time were included in the assessment. The author, journal, date and country of publication, patient group studied, study type, relevant outcomes, results and study weaknesses of the papers are tabulated. When looking at manual vs mechanical staples, it was noted that stapler failure can occur in around 4% of cases. The rate of bronchopleural fistula (BPF) development varied more in patients who underwent manual closure (1.5-12.5%) than in patients who underwent mechanical closure (1-5.7%). Although most of the studies reviewed showed no statistical differences between manual and mechanical closure in terms of BPF development, one study, however, showed that manual closure was significantly associated with lower numbers of postoperative BPF, while another study showed that mechanical closure is significantly associated with lower incidence of BPF. When looking at the role of the learning curve and training opportunities, it seems that the surgeon's inexperience when using mechanical staples can contribute to BPF development. A surgeon's experience can play a major role in the prevention of BPF development in patients having manual closure. Manual closure can provide a cheap and reliable technique when compared with costs incurred from using staplers, it is applicable in all situations and can be taught to surgeons in training with an acceptable risk. However, there is a lack of evidence to suggest that manual closure is better than mechanical stapler closure following anatomical lung resection.

Planned secondary wound closure at the circular stapler insertion site after laparoscopic gastric bypass reduces postoperative morbidity, costs, and hospital stay.

PubMed

Vetter, Diana; Raptis, Dimitri Aristotle; Giama, Mira; Hosa, Hanna; Muller, Markus K; Nocito, Antonio; Schiesser, Marc; Moos, Rudolf; Bueter, Marco

2017-12-01

The aims of the present study were to assess whether planned secondary wound closure at the insertion site of the circular stapler reduces wound infection rate and postoperative morbidity after laparoscopic Roux-en-Y gastric bypass (RYGB) and to identify independent predictive factors increasing the risk for wound infections after RYGB. This paper is a retrospective single-center analysis of a prospectively collected database of 1400 patients undergoing RYGB surgery in circular technique between June 2000 and June 2016. Planned secondary wound closure at the circular stapler introduction site was performed at postoperative day 3 in 291 (20.8%) consecutive patients and compared to a historical control of 1109 (79.2%) consecutive patients with primary wound closure. Independent predictive factors for wound infection were assessed by multivariable analysis. Secondary wound closure significantly decreased wound infection rate from 9.3% (103/1109) to 1% (3/291) (p < 0.001) leading to a shorter hospital stay (mean 9 (SD8) vs. 7 days (SD2), p < 0.001), lower costs (p = 0.039), and reduced postoperative morbidity (mean 90-day Comprehensive Complication Index (CCI) 7.4 (SD14.0) vs. 5.1 (SD11.1) p = 0.008) when compared to primary wound closure. Primary wound closure, dyslipidemia, and preoperative gastritis were independent predictive risk factors for developing wound infections both in the univariate (p < 0.001; p = 0.048; p = 0.003) and multivariable analysis (p < 0.001; p = 0.040; p = 0.012). Further, on multivariable analysis, the female gender was a predictive factor (p = 0.034) for wound infection development. Secondary wound closure at the circular stapler introduction site in laparoscopic RYGB significantly reduces the overall wound infection rate as well as postoperative morbidity, costs, and hospital stay when compared to primary wound closure.

Results of Li-Tho trial: a prospective randomized study on effectiveness of LigaSure® in lung resections.

PubMed

Bertolaccini, Luca; Viti, Andrea; Cavallo, Antonio; Terzi, Alberto

2014-04-01

The role of electro-thermal bipolar tissue sealing system (LigaSure(®), (LS); Covidien, Inc., CO, USA) in thoracic surgery is still undefined. Reports of its use are still limited. The objective of the trial was to evaluate the cost and benefits of LS in major lung resection surgery. A randomized blinded study of a consecutive series of 100 patients undergoing lobectomy was undertaken. After muscle-sparing thoracotomy and classification of lung fissures according to Craig-Walker, patients with fissure Grade 2-4 were randomized to Stapler group or LS group fissure completion. Recorded parameters were analysed for differences in selected intraoperative and postoperative outcomes. Statistical analysis was performed with the bootstrap method. Pearson's χ(2) test and Fisher's exact test were used to calculate probability value for dichotomous variables comparison. Cost-benefit evaluation was performed using Pareto optimal analysis. There were no significant differences between groups, regarding demographic and baseline characteristics. No patient was withdrawn from the study; no adverse effect was recorded. There was no mortality or major complications in both groups. There were no statistically significant differences as to operative time or morbidity between patients in the LS group compared with the Stapler group. In the LS group, there was a not statistically significant increase of postoperative air leaks in the first 24 postoperative hours, while a statistically significant increase of drainage amount was observed in the LS group. No statistically significant difference in hospital length of stay was observed. Overall, the LS group had a favourable multi-criteria analysis of cost/benefit ratio with a good 'Pareto optimum'. LS is a safe device for thoracic surgery and can be a valid alternative to Staplers. In this setting, LS allows functional lung tissue preservation. As to costs, LS seems equivalent to Staplers.

Pharyngocutaneous fistulae following total laryngectomy comparison between manual and mechanical sutures.

PubMed

Gonçalves, Antonio José; de Souza, J A L; Menezes, M B; Kavabata, N K; Suehara, A B; Lehn, C N

2009-11-01

The extension of the surgery and closure type of the pharynx can be the determinants in the pharyngocutaneous fistula development. The objective of the study is to evaluate the incidence of pharingocutaneous salivary fistulae after total laryngectomies comparing manual and mechanical sutures. The study is designed as non-randomized, prospective clinical study. Sixty patients with squamous cell carcinoma were submitted to total laryngectomies. In 30 cases, the linear stapler (75 mm) closure (surgical technique described in details) and in other 30 cases manual suture was used. The cases of mechanical suture were prospective and consecutive and the cases of manual suture were a review series of patients who underwent a manual suture of pharynx, in the same period of time. The statistical analysis between the two groups concluded that both were comparable. Fistulae incidence was 6.7% (2/30) in the group with the mechanical suture and 36.7% (11/30) in the group with manual suture closure, presenting a significant difference (p = 0.0047). The total laryngectomy with mechanical closure is an easy and fast learning technique, allowing watertight closure of the pharynx with a low risk of contamination of the surgical field. It is an assured method, even in previously irradiated patients, since we respect the limits of its indication regarding the extension of primary tumor that must be confirmed by previous suspension laryngectomy performed in the operating room.

The procedure of mesh wrapping the gastric pouch in cadaver study.

PubMed

Gong, Ke; Gagner, Michel; Bardaro, Sergio; Ueda, Kazuki

2007-12-01

Dietary and behavioral modifications have resulted in limited long-term success in curing morbidly obese patients, and surgery remains the only effective treatment. Of the surgical procedures that are the most commonly offered, Roux-en-Y gastric bypass (RYGB) appears to offer the best long-term results. However 5-15% of patients will not achieve successful weight loss after RYGB. There are many reports showing that the patients who underwent gastric bypass surgeries regain weight over time. The cause for this remains unclear. Several factors may contribute, including dilation of the gastric pouch and the gastrojejunal anastomosis. However, the data to support the link is sparse. The objective of this paper is to describe the surgical technique of wrapping the gastric pouch with a polytetrafluoroethylene (PTFE) mesh to prevent gastric pouch dilatation. In specific, we created a 20-30 ml gastric pouch and subsequently, the gastrojejunostomy was performed with a circular stapler. Afterwards, the mesentery was dissected and the gastric pouch was wrapped with the PTFE mesh. We have performed this procedure on three cadavers with an average operative time of 75 minutes. We found that the procedure of wrapping the gastric pouch was not particularly difficult. As a result, the gastric pouch, gastrojejunal anastomosis and the stump of the jejunum are all totally wrapped within the mesh. It may be effective in the prevention of dilatation.

Development of a patient-specific surgical simulator for pediatric laparoscopic procedures.

PubMed

Saber, Nikoo R; Menon, Vinay; St-Pierre, Jean C; Looi, Thomas; Drake, James M; Cyril, Xavier

2014-01-01

The purpose of this study is to develop and evaluate a pediatric patient-specific surgical simulator for the planning, practice, and validation of laparoscopic surgical procedures prior to intervention, initially focusing on the choledochal cyst resection and reconstruction scenario. The simulator is comprised of software elements including a deformable body physics engine, virtual surgical tools, and abdominal organs. Hardware components such as haptics-enabled hand controllers and a representative endoscopic tool have also been integrated. The prototype is able to perform a number of surgical tasks and further development work is under way to simulate the complete procedure with acceptable fidelity and accuracy.

Charles B.G. de Nancrede: academic surgeon at the fin de siècle.

PubMed

Bloom, D A; Uznis, G; Campbell, D A

1998-11-01

At the last turn of the century American surgery was in the midst of a number of paradigm shifts, involving transitions in technology, surgical practice, surgical specialization, patient care, surgical training, and medical economics. Charles B. G. de Nancrede was a leader during this formative period. A key figure in the transition from antiseptic to sterile technique in American medicine, he was also a prolific writer, a bold surgeon, and a great surgical educator. De Nancrede created one of the earliest prototypes of the modern multispecialty surgical departments. The coming turn of the century promises new transitions comparable to those of the past.

Utility and Scope of Rapid Prototyping in Patients with Complex Muscular Ventricular Septal Defects or Double-Outlet Right Ventricle: Does it Alter Management Decisions?

PubMed

Bhatla, Puneet; Tretter, Justin T; Ludomirsky, Achi; Argilla, Michael; Latson, Larry A; Chakravarti, Sujata; Barker, Piers C; Yoo, Shi-Joon; McElhinney, Doff B; Wake, Nicole; Mosca, Ralph S

2017-01-01

Rapid prototyping facilitates comprehension of complex cardiac anatomy. However, determining when this additional information proves instrumental in patient management remains a challenge. We describe our experience with patient-specific anatomic models created using rapid prototyping from various imaging modalities, suggesting their utility in surgical and interventional planning in congenital heart disease (CHD). Virtual and physical 3-dimensional (3D) models were generated from CT or MRI data, using commercially available software for patients with complex muscular ventricular septal defects (CMVSD) and double-outlet right ventricle (DORV). Six patients with complex anatomy and uncertainty of the optimal management strategy were included in this study. The models were subsequently used to guide management decisions, and the outcomes reviewed. 3D models clearly demonstrated the complex intra-cardiac anatomy in all six patients and were utilized to guide management decisions. In the three patients with CMVSD, one underwent successful endovascular device closure following a prior failed attempt at transcatheter closure, and the other two underwent successful primary surgical closure with the aid of 3D models. In all three cases of DORV, the models provided better anatomic delineation and additional information that altered or confirmed the surgical plan. Patient-specific 3D heart models show promise in accurately defining intra-cardiac anatomy in CHD, specifically CMVSD and DORV. We believe these models improve understanding of the complex anatomical spatial relationships in these defects and provide additional insight for pre/intra-interventional management and surgical planning.

The use of bioabsorbable staple line reinforcement for circular stapler (BSG "Seamguard") in colorectal surgery: initial experience.

PubMed

Franklin, Morris E; Ramila, Guillermo Portillo; Treviño, Jorge M; González, John J; Russek, Karla; Glass, Jeffrey L; Kim, Greg

2006-12-01

Of all the complications associated with colorectal surgery, the most devastating and constant, despite all techniques being performed properly is anastomotic leakage, especially in left colon and rectal resections with rates as high as 50% when the rectum is involved. In 2005, our center published the preliminary experience with the use of linear staple line reinforcement for colon surgery. The purpose of this paper is to present a series of cases using a new conformation of bioabsorbable reinforcement for circular staplers in 5 patients, 2 patients with rectal cancer, 2 patients with diverticular disease, and 1 patient with sigmoid cancer. These initial data are very promising and has encouraged us to continue using this device on further patients.

Completely staple-free hand-sewn laparoscopic anastomosis in colorectal surgery.

PubMed

Lipski, David; Dapri, Giovanni; Himpens, Jacques

2008-04-01

Colonic continuity following a laparoscopic left hemicolectomy is usually performed by using a circular stapler to achieve end-to-end colorectal anastomosis. However, not much consideration is given to the costs of this technique and the long-term risk of stenosis. In this paper, we report the first case of a completely staple-free hand-sewn laparoscopic colonic anastomosis (CSHLCA) following a laparoscopic left hemicolectomy for cancer. Total operative time was 170 minutes, and the time to perform the anastomosis was 38 minutes. The postoperative stay was uneventful, with a total hospital stay of 6 days. CSHLCA is feasible and can lower the cost of the laparoscopic procedure. It may be considered in countries with limited access to mechanical staplers.

Comparison of Appendectomy Outcomes Between Senior General Surgeons and General Surgery Residents.

PubMed

Siam, Baha; Al-Kurd, Abbas; Simanovsky, Natalia; Awesat, Haitham; Cohn, Yahav; Helou, Brigitte; Eid, Ahmed; Mazeh, Haggi

2017-07-01

In some centers, the presence of a senior general surgeon (SGS) is obligatory in every procedure, including appendectomy, while in others it is not. There is a relative paucity in the literature of reports comparing the outcomes of appendectomies performed by unsupervised general surgery residents (GSRs) with those performed in the presence of an SGS. To compare the outcomes of appendectomies performed by SGSs with those performed by GSRs. A retrospective analysis was performed of all patients 16 years or older operated on for assumed acute appendicitis between January 1, 2008, and December 31, 2015. The cohort study compared appendectomies performed by SGSs and GSRs in the general surgical department of a teaching hospital. The primary outcome measured was the postoperative early and late complication rates. Secondary outcomes included time from emergency department to operating room, length of surgery, surgical technique (open or laparoscopic), use of laparoscopic staplers, and overall duration of postoperative antibiotic treatment. Among 1649 appendectomy procedures (mean [SD] patient age, 33.7 [13.3] years; 612 female [37.1%]), 1101 were performed by SGSs and 548 by GSRs. Analysis demonstrated no significant difference between the SGS group and the GSR group in overall postoperative early and late complication rates, the use of imaging techniques, time from emergency department to operating room, percentage of complicated appendicitis, postoperative length of hospital stay, and overall duration of postoperative antibiotic treatment. However, length of surgery was significantly shorter in the SGS group than in the GSR group (mean [SD], 39.9 [20.9] vs 48.6 [20.2] minutes; P < .001). This study demonstrates that unsupervised surgical residents may safely perform appendectomies, with no difference in postoperative early and late complication rates compared with those performed in the presence of an SGS.

Patient and surgical factors influencing air leak after lung volume reduction surgery: lessons learned from the National Emphysema Treatment Trial.

PubMed

DeCamp, Malcolm M; Blackstone, Eugene H; Naunheim, Keith S; Krasna, Mark J; Wood, Douglas E; Meli, Yvonne M; McKenna, Robert J

2006-07-01

Although staple line buttressing is advocated to reduce air leak after lung volume reduction surgery (LVRS), its effectiveness is unknown. We sought to identify risk factors for air leak and its duration and to estimate its medical consequences for selecting optimal perioperative technique(s), such as buttressing technique, to preempt or treat post-LVRS air leak. Detailed air leak data were available for 552 of 580 patients receiving bilateral stapled LVRS in the National Emphysema Treatment Trial. Risk factors for prevalence and duration of air leak were identified by logistic and hazard function analyses. Medical consequences were estimated in propensity-matched pairs with and without air leak. Within 30 days of LVRS, 90% of patients developed air leak (median duration = 7 days). Its occurrence was more common and duration prolonged in patients with lower diffusing capacity (p = 0.06), upper lobe disease (p = 0.04), and important pleural adhesions (p = 0.007). Duration was also protracted in Caucasians (p < 0.0001), patients using inhaled steroids (p = 0.004), and those with lower 1-second forced expiratory volume (p = 0.0003). Surgical approach, buttressing, stapler brand, and intraoperative adjunctive procedures were not associated with fewer or less prolonged air leaks (p >/= 0.2). Postoperative complications occurred more often in matched patients experiencing air leak (57% vs 30%, p = 0.0004), and postoperative stay was longer (11.8 +/- 6.5 days vs 7.6 +/- 4.4 days, p = 0.0005). Air leak accompanies LVRS in 90% of patients, is often prolonged, and is associated with a more complicated and protracted hospital course. Its occurrence and duration are associated with characteristics of patients and their disease, not with a specific surgical technique.

High-performance intraoperative cone-beam CT on a mobile C-arm: an integrated system for guidance of head and neck surgery

NASA Astrophysics Data System (ADS)

Siewerdsen, J. H.; Daly, M. J.; Chan, H.; Nithiananthan, S.; Hamming, N.; Brock, K. K.; Irish, J. C.

2009-02-01

A system for intraoperative cone-beam CT (CBCT) surgical guidance is under development and translation to trials in head and neck surgery. The system provides 3D image updates on demand with sub-millimeter spatial resolution and soft-tissue visibility at low radiation dose, thus overcoming conventional limitations associated with preoperative imaging alone. A prototype mobile C-arm provides the imaging platform, which has been integrated with several novel subsystems for streamlined implementation in the OR, including: real-time tracking of surgical instruments and endoscopy (with automatic registration of image and world reference frames); fast 3D deformable image registration (a newly developed multi-scale Demons algorithm); 3D planning and definition of target and normal structures; and registration / visualization of intraoperative CBCT with the surgical plan, preoperative images, and endoscopic video. Quantitative evaluation of surgical performance demonstrates a significant advantage in achieving complete tumor excision in challenging sinus and skull base ablation tasks. The ability to visualize the surgical plan in the context of intraoperative image data delineating residual tumor and neighboring critical structures presents a significant advantage to surgical performance and evaluation of the surgical product. The system has been translated to a prospective trial involving 12 patients undergoing head and neck surgery - the first implementation of the research prototype in the clinical setting. The trial demonstrates the value of high-performance intraoperative 3D imaging and provides a valuable basis for human factors analysis and workflow studies that will greatly augment streamlined implementation of such systems in complex OR environments.

Microsurgical robotic system for the deep surgical field: development of a prototype and feasibility studies in animal and cadaveric models.

PubMed

Morita, Akio; Sora, Shigeo; Mitsuishi, Mamoru; Warisawa, Shinichi; Suruman, Katopo; Asai, Daisuke; Arata, Junpei; Baba, Shoichi; Takahashi, Hidechika; Mochizuki, Ryo; Kirino, Takaaki

2005-08-01

To enhance the surgeon's dexterity and maneuverability in the deep surgical field, the authors developed a master-slave microsurgical robotic system. This concept and the results of preliminary experiments are reported in this paper. The system has a master control unit, which conveys motion commands in six degrees of freedom (X, Y, and Z directions; rotation; tip flexion; and grasping) to two arms. The slave manipulator has a hanging base with an additional six degrees of freedom; it holds a motorized operating unit with two manipulators (5 mm in diameter, 18 cm in length). The accuracy of the prototype in both shallow and deep surgical fields was compared with routine freehand microsurgery. Closure of a partial arteriotomy and complete end-to-end anastomosis of the carotid artery (CA) in the deep operative field were performed in 20 Wistar rats. Three routine surgical procedures were also performed in cadavers. The accuracy of pointing with the nondominant hand in the deep surgical field was significantly improved through the use of robotics. The authors successfully closed the partial arteriotomy and completely anastomosed the rat CAs in the deep surgical field. The time needed for stitching was significantly shortened over the course of the first 10 rat experiments. The robotic instruments also moved satisfactorily in cadavers, but the manipulators still need to be smaller to fit into the narrow intracranial space. Computer-controlled surgical manipulation will be an important tool for neurosurgery, and preliminary experiments involving this robotic system demonstrate its promising maneuverability.

Efficacy and predictability of soft tissue ablation using a prototype Raman-shifted alexandrite laser

NASA Astrophysics Data System (ADS)

Kozub, John A.; Shen, Jin-H.; Joos, Karen M.; Prasad, Ratna; Shane Hutson, M.

2015-10-01

Previous research showed that mid-infrared free-electron lasers could reproducibly ablate soft tissue with little collateral damage. The potential for surgical applications motivated searches for alternative tabletop lasers providing thermally confined pulses in the 6- to-7-μm wavelength range with sufficient pulse energy, stability, and reliability. Here, we evaluate a prototype Raman-shifted alexandrite laser. We measure ablation thresholds, etch rates, and collateral damage in gelatin and cornea as a function of laser wavelength (6.09, 6.27, or 6.43 μm), pulse energy (up to 3 mJ/pulse), and spot diameter (100 to 600 μm). We find modest wavelength dependence for ablation thresholds and collateral damage, with the lowest thresholds and least damage for 6.09 μm. We find a strong spot-size dependence for all metrics. When the beam is tightly focused (˜100-μm diameter), ablation requires more energy, is highly variable and less efficient, and can yield large zones of mechanical damage (for pulse energies >1 mJ). When the beam is softly focused (˜300-μm diameter), ablation proceeded at surgically relevant etch rates, with reasonable reproducibility (5% to 12% within a single sample), and little collateral damage. With improvements in pulse-energy stability, this prototype laser may have significant potential for soft-tissue surgical applications.

Endodontic applications of 3D printing.

PubMed

Anderson, J; Wealleans, J; Ray, J

2018-02-27

Computer-aided design (CAD) and computer-aided manufacturing (CAM) technologies can leverage cone beam computed tomography data for production of objects used in surgical and nonsurgical endodontics and in educational settings. The aim of this article was to review all current applications of 3D printing in endodontics and to speculate upon future directions for research and clinical use within the specialty. A literature search of PubMed, Ovid and Scopus was conducted using the following terms: stereolithography, 3D printing, computer aided rapid prototyping, surgical guide, guided endodontic surgery, guided endodontic access, additive manufacturing, rapid prototyping, autotransplantation rapid prototyping, CAD, CAM. Inclusion criteria were articles in the English language documenting endodontic applications of 3D printing. Fifty-one articles met inclusion criteria and were utilized. The endodontic literature on 3D printing is generally limited to case reports and pre-clinical studies. Documented solutions to endodontic challenges include: guided access with pulp canal obliteration, applications in autotransplantation, pre-surgical planning and educational modelling and accurate location of osteotomy perforation sites. Acquisition of technical expertise and equipment within endodontic practices present formidable obstacles to widespread deployment within the endodontic specialty. As knowledge advances, endodontic postgraduate programmes should consider implementing 3D printing into their curriculums. Future research directions should include clinical outcomes assessments of treatments employing 3D printed objects. Published 2018. This article is a U.S. Government work and is in the public domain in the USA.

Efficacy and predictability of soft tissue ablation using a prototype Raman-shifted alexandrite laser

PubMed Central

Kozub, John A.; Shen, Jin-H.; Joos, Karen M.; Prasad, Ratna; Shane Hutson, M.

2015-01-01

Abstract. Previous research showed that mid-infrared free-electron lasers could reproducibly ablate soft tissue with little collateral damage. The potential for surgical applications motivated searches for alternative tabletop lasers providing thermally confined pulses in the 6- to-7-μm wavelength range with sufficient pulse energy, stability, and reliability. Here, we evaluate a prototype Raman-shifted alexandrite laser. We measure ablation thresholds, etch rates, and collateral damage in gelatin and cornea as a function of laser wavelength (6.09, 6.27, or 6.43  μm), pulse energy (up to 3  mJ/pulse), and spot diameter (100 to 600  μm). We find modest wavelength dependence for ablation thresholds and collateral damage, with the lowest thresholds and least damage for 6.09  μm. We find a strong spot-size dependence for all metrics. When the beam is tightly focused (∼100-μm diameter), ablation requires more energy, is highly variable and less efficient, and can yield large zones of mechanical damage (for pulse energies >1  mJ). When the beam is softly focused (∼300-μm diameter), ablation proceeded at surgically relevant etch rates, with reasonable reproducibility (5% to 12% within a single sample), and little collateral damage. With improvements in pulse-energy stability, this prototype laser may have significant potential for soft-tissue surgical applications. PMID:26456553

Laparoscopic Gastric Bypass for Morbid Obesity–a Randomized Controlled Trial Comparing Two Gastrojejunal Anastomosis Techniques

PubMed Central

Llopis, Salvador Navarrete; Isaac, Jose; Aulestia, Salvador Navarrete; Bravo, Carlos; Obregon, Francisco

2008-01-01

Objectives: We present a randomized controlled trial of laparoscopic gastric bypass comparing 2 techniques of gastrojejunostomy in patients with morbid obesity. Methods: Eighty consecutive patients underwent laparoscopic Roux-en-Y gastric bypass between September 2005 and August 2006. Patients were randomly assigned to 2 groups by the use of sealed envelopes. In group A, the gastrojejunal anastomosis was performed with a 21-mm circular-stapler, and in group B, this anastomosis was performed with a 45-mm linear-stapler. The rest of the procedure was identical in both groups. Variables evaluated were complications involving the gastrojejunostomy, operative time, length of stay, and percentage of excess weight loss. Results: Both groups were similar in age and body mass index. No patients experienced leakage or gastrojejunal anastomosis fistula, but group A patients had a more frequent stricture rate (P<0.05). Operative time and hospital stay were comparable in both groups (P>0.05). Percentage excess weight loss at one year following surgery was satisfactory in both groups, without a statistically significant difference (P>0.05). Conclusion: Gastrojejunal anastomosis does not seem to be a critical factor in excess weight loss for morbidly obese patients who underwent laparoscopic gastric bypass. The 2 techniques used in this experience are safe and effective; however, the 45-mm liner-stapler is preferable because it has a lower stricture rate. PMID:19275854

Laparoscopic stomach-partitioning gastrojejunostomy with reduced-port techniques for unresectable distal gastric cancer.

PubMed

Hirahara, Noriyuki; Matsubara, Takeshi; Hyakudomi, Ryoji; Hari, Yoko; Fujii, Yusuke; Tajima, Yoshitsugu

2014-03-01

The improvement of quality of life is of great importance in managing patients with far-advanced gastric cancer. We report a new cure and less invasive method of creating a stomach-partitioning gastrojejunostomy in reduced-port laparoscopic surgery for unresectable gastric cancers with gastric outlet obstruction. A 2.5-cm vertical intraumbilical incision was made, and EZ Access (Hakko Co., Ltd., Tokyo, Japan) was placed. After pneumoperitoneum was created, an additional 5-mm trocar was inserted in the right upper abdomen. A gastrojejunostomy was performed in the form of an antiperistaltic side-to-side anastomosis, in which the jejunal loop was elevated in the antecolic route and anastomosed to the greater curvature of the stomach using an endoscopic linear stapler. The jejunal loop together with the stomach was dissected with additional linear staplers just proximal to the common entry hole so that a functional end-to-end gastrojejunostomy was completed. At the same time, the stomach was partitioned using a linear stapler to leave a 2-cm-wide lumen in the lesser curvature. Subsequently, jejunojejunostomy was performed 30 cm distal to the gastrojejunostomy, and the stomach-partitioning gastrojejunostomy resembling Roux-en Y anastomosis was completed. All patients resumed oral intake on the day of operation. Neither anastomotic leakage nor anastomotic stricture was observed. Our less invasive palliative operation offers the utmost priority to improve quality of life for patients with unresectable gastric cancer.

Pediatric medical device development by surgeons via capstone engineering design programs.

PubMed

Sack, Bryan S; Elizondo, Rodolfo A; Huang, Gene O; Janzen, Nicolette; Espinoza, Jimmy; Sanz-Cortes, Magdalena; Dietrich, Jennifer E; Hakim, Julie; Richardson, Eric S; Oden, Maria; Hanks, John; Haridas, Balakrishna; Hury, James F; Koh, Chester J

2018-03-01

There is a need for pediatric medical devices that accommodate the unique physiology and anatomy of pediatric patients that is increasingly receiving more attention. However, there is limited literature on the programs within children's hospitals and academia that can support pediatric device development. We describe our experience with pediatric device design utilizing collaborations between a children's hospital and two engineering schools. Utilizing the academic year as a timeline, unmet pediatric device needs were identified by surgical faculty and matched with an engineering mentor and a team of students within the Capstone Engineering Design programs at two universities. The final prototypes were showcased at the end of the academic year and if appropriate, provisional patent applications were filed. All twelve teams successfully developed device prototypes, and five teams obtained provisional patents. The prototypes that obtained provisional patents included a non-operative ureteral stent removal system, an evacuation device for small kidney stone fragments, a mechanical leech, an anchoring system of the chorio-amniotic membranes during fetal surgery, and a fetal oxygenation monitor during fetoscopic procedures. Capstone Engineering Design programs in partnership with surgical faculty at children's hospitals can play an effective role in the prototype development of novel pediatric medical devices. N/A - No clinical subjects or human testing was performed. Copyright © 2017 Elsevier Inc. All rights reserved.

High-spin states and possible "stapler" band in 115In

NASA Astrophysics Data System (ADS)

Chen, Z. Q.; Wang, S. Y.; Liu, L.; Zhang, P.; Jia, H.; Qi, B.; Wang, S.; Sun, D. P.; Liu, C.; Li, Z. Q.; Wu, X. G.; Li, G. S.; He, C. Y.; Zheng, Y.; Zhu, L. H.

2015-04-01

High-spin states of 115In have been studied using the 114Cd (7Li,α 2 n ) reaction at a beam energy of 48 MeV. A total of 13 new transitions have been observed and added to the level scheme of 115In. Most of the states in 115In can be interpreted in terms of the weak coupling of a g9 /2 proton hole to the core states of 116Sn or a g7 /2 proton to the core states of 114Cd. A Δ I =1 band with the π (g9/2) -1⊗ν (h11/2) 2 configuration was suggested as an oblate band built on the "stapler" mechanism with the aid of the tilted axis cranking model based on covariant density functional theory.

A case of stapler pin in the root canal--extending beyond the apex.

PubMed

Rao, A; Sudha, P

1999-01-01

There have been several reports describing the placement, by patients, of foreign objects into exposed pulp chambers and canals. In the present case, a 13-year-old patient reported with complaints of pain and a history of inserting a foreign object into the root canal of the left central incisor. On examination the foreign body was found to be a stapler pin which was projecting 5 millimeters from the apical foramen. Foreign bodies discovered from the root canal have varied from radiolucent objects like wooden tooth picks or tooth brush bristles to radioopaque materials like paper pins, needles, pencil leads etc. In the present case, despite our best efforts, the patient did not agree to undergo any treatment except for the extraction of the left central incisor.

Requirements for the structured recording of surgical device data in the digital operating room.

PubMed

Rockstroh, Max; Franke, Stefan; Neumuth, Thomas

2014-01-01

Due to the increasing complexity of the surgical working environment, increasingly technical solutions must be found to help relieve the surgeon. This objective is supported by a structured storage concept for all relevant device data. In this work, we present a concept and prototype development of a storage system to address intraoperative medical data. The requirements of such a system are described, and solutions for data transfer, processing, and storage are presented. In a subsequent study, a prototype based on the presented concept is tested for correct and complete data transmission and storage and for the ability to record a complete neurosurgical intervention with low processing latencies. In the final section, several applications for the presented data recorder are shown. The developed system based on the presented concept is able to store the generated data correctly, completely, and quickly enough even if much more data than expected are sent during a surgical intervention. The Surgical Data Recorder supports automatic recognition of the interventional situation by providing a centralized data storage and access interface to the OR communication bus. In the future, further data acquisition technologies should be integrated. Therefore, additional interfaces must be developed. The data generated by these devices and technologies should also be stored in or referenced by the Surgical Data Recorder to support the analysis of the OR situation.

Thoracoscopic pneumonectomy for severe bronchiectasis in a 9-year-old female.

PubMed

Anselmo, Dean M; Perez, Iris A; Shaul, Donald B

2008-10-01

Thoracoscopic total pneumonectomy has not been previously described in the pediatric surgical literature. In this paper, we describe a case of pneumonectomy performed through a minimally invasive approach in a 9-year-old female with Down's syndrome and gastroesophageal reflux disease. The patient suffered from multiple recurrent aspiration pneumonias, which progressed to bronchiectasis of the entire left lung. As a result, the patient was hypoxemic and required continuous supplemental oxygen. Preoperative perfusion scans showed diminished perfusion of the left lung. Thoracoscopy was performed by using 3-5 mm trocars and one 12-mm trocar. Insufflation pressure was maintained at 5 mm Hg. Dissection was performed at the hilum by using hook electrocautery and the LigaSure device (ValleyLab, Boulder, CO). The pulmonary artery, veins, and left mainstem bronchus were sequentially divided by using a 35-mm ENDO GIA vascular stapler (Ethicon Endo-Surgery, Cincinnati, OH). There were no intraoperative complications. Eight months following surgery, her health is improved and she no longer requires supplemental oxygen. Thoracoscopic pneumonectomy is a safe, technically feasible approach for severe bronchiectasis in children.

Videothoracoscopy and muscle flaps in the treatment of bronchial stump fistula.

PubMed

Kowalewski, J; Brocki, M; Galikowski, M; Kapron, K

1999-01-01

The aim of the paper is to report our surgical technique applied for treatment of broncho-pleural fistula (BPF) as well as the results of the treatment. From 1992 to 1998 we performed 127 pneumonectomies for lung cancer. In 5 cases (3.9%) bronchial stump insufficiency developed postoperatively. Three patients were treated by means of videothoracoscopy (the Multifire Endo Hernia Stapler was used to clipped the fistula). Rethoracotomy with myoplasty was performed four times in 3 patients. In one patient both the methods were employed. In 2 out of 3 cases videothoracoscopic treatment was successful and the patients were discharged without signs of BPF and pleural empyema. In one case the recurrence of the fistula occurred and the stump of the bronchus was successfully covered with the pectoral musce flap 3 days later. In two cases after rethoracotomy and myoplasty (one of them was reoperated twice) the recurrence of BPF occurred and both the patients died due to cardiopulmonary failure. Despite the limited experience, we think videothoracoscopy is worth considering as a tool for treatment of BPF.

No evidence that manual closure of the bronchial stump has a lower failure rate than mechanical stapler closure following anatomical lung resection

PubMed Central

Zakkar, Mustafa; Kanagasabay, Robin; Hunt, Ian

2014-01-01

A best evidence topic in cardiothoracic surgery was written according to a structured protocol. The question addressed was whether manual closure of the bronchial stump is safer with lower failure rates than mechanical closure using a stapling device following anatomical lung resection. One hundred and twenty-nine papers were identified using the search below. Eight papers presented the best evidence to answer the clinical question as they included sufficient number of patients to reach conclusions regarding the issues of interest for this review. Complications, complication rates and operation time were included in the assessment. The author, journal, date and country of publication, patient group studied, study type, relevant outcomes, results and study weaknesses of the papers are tabulated. When looking at manual vs mechanical staples, it was noted that stapler failure can occur in around 4% of cases. The rate of bronchopleural fistula (BPF) development varied more in patients who underwent manual closure (1.5–12.5%) than in patients who underwent mechanical closure (1–5.7%). Although most of the studies reviewed showed no statistical differences between manual and mechanical closure in terms of BPF development, one study, however, showed that manual closure was significantly associated with lower numbers of postoperative BPF, while another study showed that mechanical closure is significantly associated with lower incidence of BPF. When looking at the role of the learning curve and training opportunities, it seems that the surgeon's inexperience when using mechanical staples can contribute to BPF development. A surgeon's experience can play a major role in the prevention of BPF development in patients having manual closure. Manual closure can provide a cheap and reliable technique when compared with costs incurred from using staplers, it is applicable in all situations and can be taught to surgeons in training with an acceptable risk. However, there is a lack of evidence to suggest that manual closure is better than mechanical stapler closure following anatomical lung resection. PMID:24351508

Pulmonary Laser Metastasectomy by 1318-nm Neodymium-Doped Yttrium-Aluminum Garnet Laser: A Retrospective Study About Laser Metastasectomy of the Lung.

PubMed

Porrello, Calogero; Gullo, Roberto; Vaglica, Antonino; Scerrino, Gregorio; Salamone, Giuseppe; Licari, Leo; Raspanti, Cristina; Gulotta, Eliana; Gulotta, Gaspare; Cocorullo, Gianfranco

2018-04-01

The lungs are among the first organ affected by remote metastases from many primary tumors. The surgical resection of isolated pulmonary metastases represents an important and effective element of therapy. This is a retrospective study about our entire experience with pulmonary resection for metastatic cancer using 1318-nm neodymium-doped yttrium-aluminum garnet laser. In this single-institution study, we retrospectively analyzed a group of 209 patients previously treated for primary malignant solid tumors. We excluded 103 patients. The number and location of lesions in the lungs was determined using chest computed tomography and positron emission tomography-computed tomography. Disseminated malignancy was excluded. All pulmonary laser resections are performed via an anteroaxillary muscle-sparing thoracotomy. All lesions were routinely removed by laser with a small (5-10 mm) margin of the healthy lung. Patients received systematic lymph node sampling with intraoperative smear cytology of sampled lymph nodes. Mortality at 2 years from the first surgery is around 20% (10% annually). This value increases to 45% in the third year. The estimated median survival for patients who underwent the first surgery is reported to be approximately 42 months. Our results show that laser resection of lung metastases can achieve good result, in terms of radical resection and survival, as conventional surgical metastasectomy. The great advantage is the possibility of limiting the damage to the lung. Stapler resection of a high number of metastases would mutilate the lung.

Hand-assisted laparoscopic radical nephrectomy in the treatment of a renal cell carcinoma with a level II vena cava thrombus.

PubMed

Kovac, Jason R; Luke, Patrick P

2010-01-01

Excision of renal cell carcinoma (RCC) with corresponding vena cava thrombus is a technical challenge requiring open resection and vascular clamping. A 58 year old male with a right kidney tumor presented with a thrombus extending 1 cm into the vena cava. Using a hand-assisted transperitoneal approach through a 7 cm gel-port, the right kidney was dissected and the multiple vascular collaterals supplying the tumor were identified and isolated. The inferior vena cava was mobilized 4 cm cephalad and 4 cm caudal to the right renal vein. Lateral manual traction was applied to the right kidney allowing the tumor thrombus to be retracted into the renal vein, clear of the vena cava. After laparoscopic ultrasonographic confirmation of the location of the tip of the tumor thrombus, an articulating laparoscopic vascular stapler was used to staple the vena cava at the ostium of the right renal vein. This allowed removal of the tumor thrombus without the need for a Satinsky clamp. The surgery was completed in 243 minutes with no intra-operative complications. The entire kidney and tumor thrombus was removed with negative surgical margins. Estimated blood loss was 300 cc. We present a laparoscopic resection of a renal mass with associated level II thrombus using a hand-assisted approach. In patients with minimal caval involvement, our surgical approach presents an option to the traditional open resection of a renal mass.

Self-expandable metallic stents in the treatment of post-esophagogastrostomy/post-esophagoenterostomy fistula.

PubMed

Nowakowski, P; Ziaja, K; Ludyga, T; Kuczmik, W; Biolik, G; Cwik, P; Ziaja, D

2007-01-01

Esophageus or gaster resection in patients with malignant disease is still a treatment of choice. It is obvious that each surgical procedure in these patients carries some possibility of complications. Esophageo-gastric or esophageo-jejuno anastomosis has a 4-27% frequency of fistula occurrence. All these result in 65% mortality in cases of poorer prognosis. The aim of this paper is not to present all types of complications but to objectively analyse the usefulness of the covered stent placement in the treatment of anastomotic fistulas. We present six patients who were treated for postoperative fistula of esophageo-gastric anastomosis (1 case) or esophageo-jejuno anastomosis (5 cases). All patients were treated with stapler suture for digestive tract reconstruction after malignancy removal during the primary surgical procedure. Signs and symptoms of suture leak between 5-8 days post-surgery were observed. Conservative therapy was not effective. Thus a new method of treatment was employed - covered stent placement. The procedure was performed under X-ray control. In all treated patients there was change for the better and quick reduction of secretion from the fistulas was observed. All patients were discharged from the department after several days and all had survived at 30 days follow-up. Covered esophageal stent placement seems to be a safe and promising method of treatment for patients with anastomotic fistula which significantly reduces mortality and improves quality of live. Our experiences confirms that of other investigators.

Laparoscopic splenectomy and azygoportal disconnection for bleeding varices with hypersplenism.

PubMed

Wang, Yue D; Ye, Huan; Ye, Zai Y; Zhu, Yang W; Xie, Zhi J; Zhu, Jin H; Liu, Jin M; Zhao, Ting

2008-02-01

Bleeding from esophageal varices is an important cause of morbidity and mortality in patients with portal hypertension. The ideal surgical procedure should control bleeding with as little impairment of liver function as possible and with low rates of encephalopathy. Recently, significant progress in laparoscopic technology has enabled laparoscopic splenectomy and devascularization of the lower esophagus and upper stomach in a less invasive way. In this paper, we present preliminary results for 25 patients in whom laparoscopic splenectomy and azygoportal disconnection were performed. Laparoscopic splenectomy and devascularization of the lower esophagus and upper stomach were performed in 25 patients with cirrhosis, bleeding portal hypertension, and secondary hypersplenism between January 2000 and October 2006. Among them, 5 patients underwent a laparoscopic modified Sugiura procedure, the lower esophagus was transected, and then reanastomosed with a circular stapler. Laparoscopic splenectomy and azygoportal disconnection were completed in all patients, except in 1 conversion, without significant morbidity. The operation time ranged from 4.0 to 5.5 hours and the blood loss was 100-400 mL. The postoperative hospital stay was 6-15 days. During a postoperative follow-up period of 3 months to 5 years in 22 patients, neither esophagus variceal bleeding nor encephalopathy has recurred. Laparoscopic splenectomy and azygoportal disconnection are feasible, effective, and safe surgical procedures, and have all the benefits of minimally invasive surgery for patients with bleeding portal hypertension and hypersplenism. Laparoscopic splenectomy and azygoportal disconnection offer a new operative method for treatment of bleeding portal hypertension with hypersplenism.

[Regression analysis of the characteristics and outcome of colorectal cancer 1995 - 2007].

PubMed

Chen, Chuang-qi; Fang, Le-kun; Ma, Jin-ping; Cai, Shi-rong; Dong, Wen-guang; Huang, Yi-hua; He, Yu-long; Zhan, Wen-hua

2010-07-13

To explore the clinical characteristics and the prognostic factors of patients with colorectal cancer. The data of 2042 cases of colorectal cancer, pathologically confirmed at our hospital from January 1995 to December 2007, were summarized and analyzed. The median age of all cases with colorectal cancer was 59 years old. The high-risk age ranged from 50 to 70 years old. The ratio of male and female was 1.4:1. The lesions located in rectum accounted for 46.2% and those for 22.0% in sigmoid. Patients under age 40 had a higher percentage of poor differentiation (33.5%) and mucinous carcinoma (16.7%). The cases with confirmed stage I, II, III and IV were 5.8%, 42.9%, 31.0% and 20.3% respectively. For all cases, the 1-, 3-, 5- and 10-year survival rates were 92.3%, 73.9%, 65.1% and 57.5% respectively. The independent risk factors for patient prognosis were age, gross type, differentiation, TNM staging and surgical type. Adjuvant chemotherapy was a protective factor. As compared with phase I (1995 - 2001), phase II (2002 - 2007) had a higher proportions of employing stapler, Dixon operation and adjuvant chemotherapy. The 1-, 3- and 5-year survival rates of phase II were higher than phase I (93.4%, 78.0% and 73.2% vs 90.6%, 69.2% and 58.8%). The prognostic factors of patients with colorectal cancer are age, gross type, differentiation, TNM staging, surgical type and adjuvant chemotherapy.

Cost-revenue analysis in the surgical treatment of the obstructed defecation syndrome.

PubMed

Schiano di Visconte, Michele; Piccin, Alessandra; Di Bella, Raimondo; Giomo, Priscilla; Pederiva, Vania; Cina, Livio Dal; Munegato, Gabriele

2006-01-01

The obstructed defecation syndrome is a frequent condition in the female population. Rectocele and rectal intussusception may cause symptoms of obstructed defecation. The aim of this study is to carry out an economic cost-revenue analysis comparing the rectocele and the rectal intussusception surgical techniques using a double-transanal, circular stapler (Stapled Trans-Anal Rectal Resection - STARR) with other techniques used to repair the same defects. The analysis involved the systematic calculation of the costs incurred during hospitalisation. The revenue estimate was obtained according to the rate quantification of the Diagnosis Related Group (DRG) associated with each hospitalisation. Our analysis confirmed that the global expenditure for the STARR technique amounts to 3,579.09 Euro as against 5,401.15 Euro for rectocele abdominal repair and 3,469.32 Euro for perineal repair. The intussusception repair cost according to Delorme's procedure amounts to 5,877.41Euro as against 3,579.09 Euro for the STARR technique. The revenue analysis revealed a substantial gain for the Health Authority as regards the treatment of rectocele and rectal intussusception for obstructed defecation syndrome. The highest revenue, 6,168. 52 Euro, was obtained with intussusception repair with STARR as compared to Delorme's procedure which presented revenue amounting to 2,359.04. Lower revenues are recorded if the STARR technique is intended for rectocele repair; in this case the revenue amounts to 1,778.12 Euro as against 869.67 Euro and 1,887.89 Euro for abdominal and perineal repair, respectively.

An anthropomorphic design for a minimally invasive surgical system based on a survey of surgical technologies, techniques and training.

PubMed

Tzemanaki, Antonia; Walters, Peter; Pipe, Anthony Graham; Melhuish, Chris; Dogramadzi, Sanja

2014-09-01

Over the past century, abdominal surgery has seen a rapid transition from open procedures to less invasive methods, such as robot-assisted minimally invasive surgery (MIS). This study aimed to investigate and discuss the needs of MIS in terms of instrumentation and to inform the design of a novel instrument. A survey was conducted among surgeons regarding their opinions on surgical training, surgical systems, how satisfied they were with them and how easy they were to use. A concept for MIS robotic instrumentation was then developed and a series of focus groups with surgeons were run to discuss it. The initial prototype of the robotic instruments, herein demonstrated, comprises modular rigid links with soft joints actuated by shape memory alloy helix actuators; these instruments are controlled using a sensory hand exoskeleton. The results of the survey, as well as those of the focus groups, are presented here. A first prototype of the system was built and initial laboratory tests have been conducted in order to evaluate this approach. The analysed data from both the survey and the focus groups justify the chosen concept of an anthropomorphic MIS robotic system which imitates the natural motion of the hands. Copyright © 2013 John Wiley & Sons, Ltd.

D Modelling and Rapid Prototyping for Cardiovascular Surgical Planning - Two Case Studies

NASA Astrophysics Data System (ADS)

Nocerino, E.; Remondino, F.; Uccheddu, F.; Gallo, M.; Gerosa, G.

2016-06-01

In the last years, cardiovascular diagnosis, surgical planning and intervention have taken advantages from 3D modelling and rapid prototyping techniques. The starting data for the whole process is represented by medical imagery, in particular, but not exclusively, computed tomography (CT) or multi-slice CT (MCT) and magnetic resonance imaging (MRI). On the medical imagery, regions of interest, i.e. heart chambers, valves, aorta, coronary vessels, etc., are segmented and converted into 3D models, which can be finally converted in physical replicas through 3D printing procedure. In this work, an overview on modern approaches for automatic and semiautomatic segmentation of medical imagery for 3D surface model generation is provided. The issue of accuracy check of surface models is also addressed, together with the critical aspects of converting digital models into physical replicas through 3D printing techniques. A patient-specific 3D modelling and printing procedure (Figure 1), for surgical planning in case of complex heart diseases was developed. The procedure was applied to two case studies, for which MCT scans of the chest are available. In the article, a detailed description on the implemented patient-specific modelling procedure is provided, along with a general discussion on the potentiality and future developments of personalized 3D modelling and printing for surgical planning and surgeons practice.

Complex task performance in Cyberspace. Surgical procedures in a telepresence environment.

PubMed

Bowersox, J C; LaPorta, A J; Cordts, P R; Bhoyrul, S; Shah, A

1996-01-01

To assess the capabilities of our fully functional, prototype telepresence surgery system, experienced surgeons performed complete operative procedures on live, anesthetized pigs. Cholecystectomy, the prototypical procedure for evaluating the integration of surgical skills, was successfully performed in six animals. There were no aborted attempts or complications. Other procedures completed included gastrotomy and enterotomy closures, anastomosis of the small intestine, and nephrectomy. No specific training was required for using the telepresence surgery system, and the "feel" of the system was described as intuitive. Operative times were longer than required in conventional, open surgery, most likely the result of the four degrees of freedom available in the manipulators of the current-generation system. Force feedback and high-resolution, stereoscopic video input facilitated performance. Surgeons operating through a first-generation telepresence system can achieve technical results equivalent to those obtained in conventional surgery.

Prototyping of cerebral vasculature physical models.

PubMed

Khan, Imad S; Kelly, Patrick D; Singer, Robert J

2014-01-01

Prototyping of cerebral vasculature models through stereolithographic methods have the ability to accurately depict the 3D structures of complicated aneurysms with high accuracy. We describe the method to manufacture such a model and review some of its uses in the context of treatment planning, research, and surgical training. We prospectively used the data from the rotational angiography of a 40-year-old female who presented with an unruptured right paraclinoid aneurysm. The 3D virtual model was then converted to a physical life-sized model. The model constructed was shown to be a very accurate depiction of the aneurysm and its associated vasculature. It was found to be useful, among other things, for surgical training and as a patient education tool. With improving and more widespread printing options, these models have the potential to become an important part of research and training modalities.

Transabdominal midline reconstruction by minimally invasive surgery: technique and results.

PubMed

Costa, T N; Abdalla, R Z; Santo, M A; Tavares, R R F M; Abdalla, B M Z; Cecconello, I

2016-04-01

The introduction of the minimally invasive approach changed the way abdominal surgery was carried out. Open suture and mesh reinforcement in ventral hernia repair used to be the surgeon's choice of procedure. Although the laparoscopic approach, with defect bridging and mesh fixation, has been described since 1993, the procedure remains largely unchanged. Evidence shows that defect closure and retro-muscular mesh positioning have the best outcomes and are the best surgical practice. We therefore aimed to develop and demonstrate a procedure which combined the good results of open surgery using the Rives-Stoppa principles, particularly in terms of recurrence, with all the benefits of minimally invasive surgery. Between October 2012 and February 2014, 15 post-bariatric surgery patients underwent laparoscopic midline incisional hernia repair. The peritoneal cavity was accessed through a 5-mm optical view cannula at the superior left quadrant. A suprapubic and two right and left lower quadrant cannulas were inserted for inferior access and dissection. The defect adhesions were released. The whole midline was closed with an endoscopic linear stapler, including the defect, from the lower abdomen, 4 cm below the umbilicus, until the epigastric region, including posterior sheath mechanical suturing and cutting in the same movement. A retrorectus space was created in which a retro-muscular mesh was deployed. Fixation was done using a hernia stapler against the posterior sheath from the peritoneal cavity to the abdominal wall muscles. Selection was based on xifo-umbilical incisional midline hernias post open bariatric surgery. Pregnant women, cancer patients, or patients with clinical contraindications were excluded. The patients mean age was 51.2 years (range 39-67). Four patients were men and eleven women. Two had well-compensated fibromyalgia, four had diabetes, and five had hypertension. The mean BMI was 29.5 kg/m2 (range 23-31.6). Surgery was performed successfully in all cases through four ports; the number of incisional hernias was 3 ± 2, with a mean maximum width of 3.75 cm (range 2.1-9) and maximum length of 14 cm (7.5-20.5). The mean surgical time was 114.3 min (range 85-170), and the median hospital stay was 1.4 days. No intra-operative or immediate post-operative complication or death occurred. One patient had a seroma treated conservatively 1 week after surgery and another had a retro-muscular infection treated with percutaneous drainage. CT-Scans made before and after the procedure, showed total closure of the defect. QOL questionnaire showed satisfaction, acceptance, and no complaints. Although the study involved a small number of patients, it has proved the technique to be feasible, easy to perform, and have the combined benefits of laparoscopic and open surgery. The results, shown by CT-scan, peri-operative, and QOL findings, were good.

Safety and Efficacy of a New Bipolar Energy Device for Parenchymal Dissection in Laparoscopic Liver Resection.

PubMed

Dural, Cem; Akyuz, Muhammet; Yazici, Pinar; Aksoy, Erol; Aucejo, Federico; Quintini, Cristiano; Miller, Charles; Fung, John; Berber, Eren

2016-02-01

Despite emerging technologies, parenchymal transection still remains challenging in liver resection. The aim of this study is to assess the safety and efficacy of a new articulating vessel sealer for laparoscopic hepatectomy. Our hypothesis was that this new device would facilitate parenchymal transection and reduce intraoperative costs in laparoscopic hepatectomy. Within 18 months, a 5 cm bipolar articulating vessel sealer was used in 32 laparoscopic liver resections (LLR). By excluding 4 patients who underwent concomitant colorectal resections, the outcomes of the remaining 28 patients (group 1) were compared with 28 patients who underwent LLR by the same surgical group using other energy devices (group 2). Tumor type was malignant in 71% of patients (n=20) in group 1 and 89% of the patients (n=25) in group 2 (P=0.360). The number and size of tumors were similar in both groups, as well as the type of resections performed. In group 1, there was a less number of adjunctive devices (ie, energy, clip appliers, staplers) used (median 2) compared with group 2 (median 3, P=0.032). Parenchymal transection time (mean±SEM 28.2±3.5 vs. 55.2±4.1 min, respectively, P<0.001) and total operative time (200.1±13.7 vs. 242.7±14.4 min, respectively, P=0.036) were shorter for group 1 versus group 2. Estimated blood loss, transfusion rate, margin status, and length of stay were similar between the groups. There was no mortality. Morbidity was 11% (n=3) in group 1 and 18% (n=5) in group 2 (P=NS). The overall intraoperative costs were an average of $3000 less in group 1 (95% confidence interval, $1090-$4930, P=0.0029) compared with group 2. This study demonstrates the safety and efficacy of a new energy device for LLR. Our experience suggested that this new device provided the functionality of both a vessel sealer and a stapler with its large jaw and articulation.

Long-term clinical results of double-pursestring stapled hemorrhoidopexy in a selected group of patients for the treatment of chronic hemorrhoids.

PubMed

Arroyo, Antonio; Pérez-Legaz, Juan; Miranda, Elena; Moya, Pedro; Ruiz-Tovar, Jaime; Lacueva, Francisco-Javier; Candela, Fernando; Calpena, Rafael

2011-05-01

The aim of this prospective controlled trial was to evaluate the long-term clinical and manometric results of stapled hemorrhoidopexy performed by expert surgeons in a selected group of patients for the treatment of chronic hemorrhoids. This study took place in the outpatient clinic and at the Day Surgery Unit attached to the University Hospital of Elche. From March 2003 to May 2005, 200 consecutive patients with third-degree hemorrhoids and treated with double-pursestring stapled hemorrhoidopexy with a PPH33-03 stapler were included in the study. Demographic, manometric, and clinical features were analyzed, as well as the variables related to surgery, postoperative course, and follow-up. Manometry was repeated at the 6-month, 1-year, and 5-year follow-up. Median follow-up was 110 months. Four patients (2%) reported daily rectal bleeding. One patient with active rectal bleeding was taken for reoperation within the first 12 postoperative hours. Seventy percent of patients reported pain ≤ 2 on the first postoperative day, 85% on the fourth postoperative day, and 95% on the seventh postoperative day. Pain was measured with a linear analog scale from 0 to 10 (0 = no pain; 10 = unbearable pain). Seventeen patients (8.5%) reported tenesmus during the first week. Eight patients (4%) reported persistent pain: in 5 patients, the pain resolved within the next 6 months; 2 patients presented with anal fissure; and 1 patient required the removal of the staples. Two patients (1%) reported residual soiling at the 5-year revision. Fourteen patients (7%) experienced recurrence with symptomatic prolapse. Six (3%) underwent further surgery: stapled hemorrhoidopexy was indicated again in 2 patients, and 4 patients underwent a Milligan-Morgan open hemorrhoidectomy, because they did not have a uniform prolapse. Six patients required treatment with rubber band ligation. There were no statistically significant differences between preoperative and postoperative manometric values. The new PPH33-03 stapler, the learning process of the modified surgical procedure, and the correct selection of patients will overcome the main objections to stapled hemorrhoidopexy.

Preservation of the vegetative pelvic nerves and local reccurence in the operative treatment of rectal cancer.

PubMed

Jota, G J; Karadzov, Z; Panovski, M; Vasilevski, V; Serafimoski, V

2006-12-01

Life quality of the patients operated from rectal cancer is a serious problem. Despite the curing as a primary objective in the treatment of the rectal cancer, special attention is paid to the life quality upon the performed operation on the subjected patients. The analyzed series consists of 29 patients with rectal cancer, operated on at the Digestive Surgery Clinic within the framework of the Clinical Centre in Skopje, in the period between 2001-2006. Our series involves patients from the T2 and T3 stage of the illness, where it possible to preserve the vegetative pelvic nerves, that are characterized by a relatively long-lasting symptomatology and relatively high percentage of lymphatic metastases. The standardization of the operative intervention resulted in an increase in the number of patients with continuous operations and preservation of the neuro-vegetative plexus without influencing the radicalism of the intervention. The application of the Stapler and Double Stapler technique brought about an increase in the number of continuous operations characterized by a termino-terminal colorectal anastomosis. On the other hand the preventive creation of LOOP ileostomies in the case of the ultra low resections resulted in a decrease in the level of dehiscence of this type as one of the most common and most difficult complications. The preservation of the pelvic neuro-vegetative plexus prolongs the operation time by 30 to 60 minutes, depending on the case and the patient. We assume that the procedure does not have a particular influence on the frequency of the complications, and at the same time it positively affects the revival of the urinal and sexual function. Taking into consideration the fact that the lymphatic dissection increases the possibility of removal of the malignant tissue and enables an adequate "staging" and on the other hand the preservation of the pelvic plexus improves the quality of life, both in terms of the sexual function and the function of the urinary bladder, it is recommended that this way of treatment becomes an integral part in the surgical treatment of the rectal cancer.

Laparoscopic right-sided colonic resection with transluminal colonoscopic specimen extraction

PubMed Central

Kayaalp, Cuneyt; Kutluturk, Koray; Yagci, Mehmet Ali; Ates, Mustafa

2015-01-01

AIM: To study the transcolonic extraction of the proximally resected colonic specimens by colonoscopic assistance at laparoscopic colonic surgery. METHODS: The diagnoses of our patients were Crohn’s disease, carcinoid of appendix and adenocarcinoma of cecum. We preferred laparoscopic total mesocolic resections. Colon and terminal ileum were divided with endoscopic staplers. A colonoscope was placed per anal and moved proximally in the colon till to reach the colonic closed end under the laparoscopic guidance. The stump of the colon was opened with laparoscopic scissors. A snare of colonoscope was released and the intraperitoneal complete free colonic specimen was grasped. Specimen was moved in to the colon with the help of the laparoscopic graspers and pulled gently through the large bowel and extracted through the anus. The open end of the colon was closed again and the ileal limb and the colon were anastomosed intracorporeally with a 60-mm laparoscopic stapler. The common enterotomy orifice was closed in two layers with a running intracorporeal suture. RESULTS: There were three patients with laparoscopic right-sided colonic resections and their specimens were intended to remove through the remnant colon by colonoscopy but the procedure failed in one patient (adenocarcinoma) due to a bulky mass and the specimen extraction was converted to transvaginal route. All the patients had prior abdominal surgeries and had related adhesions. The operating times were 210, 300 and 500 min. The lengths of the specimens were 13, 17 and 27 cm. In our cases, there were no superficial or deep surgical site infections or any other complications. The patients were discharged uneventfully within 4-5 d and they were asymptomatic after a mean 7.6 mo follow-up (ranged 4-12). As far as we know, there were only 12 cases reported yet on transcolonic extraction of the proximal colonic specimens by colonoscopic assistance after laparoscopic resections. With our cases, success rate of the overall experience in the literature was 80% (12/15) in selected cases. CONCLUSION: Transcolonic specimen extraction for right-sided colonic resection is feasible in selected patients. Both natural orifice surgery and intracorporeal anastomosis avoids mini-laparotomy for specimen extraction or anastomosis. PMID:26380054

Prototyping of cerebral vasculature physical models

PubMed Central

Khan, Imad S.; Kelly, Patrick D.; Singer, Robert J.

2014-01-01

Background: Prototyping of cerebral vasculature models through stereolithographic methods have the ability to accurately depict the 3D structures of complicated aneurysms with high accuracy. We describe the method to manufacture such a model and review some of its uses in the context of treatment planning, research, and surgical training. Methods: We prospectively used the data from the rotational angiography of a 40-year-old female who presented with an unruptured right paraclinoid aneurysm. The 3D virtual model was then converted to a physical life-sized model. Results: The model constructed was shown to be a very accurate depiction of the aneurysm and its associated vasculature. It was found to be useful, among other things, for surgical training and as a patient education tool. Conclusion: With improving and more widespread printing options, these models have the potential to become an important part of research and training modalities. PMID:24678427

Avoiding Focus Shifts in Surgical Telementoring Using an Augmented Reality Transparent Display.

PubMed

Andersen, Daniel; Popescu, Voicu; Cabrera, Maria Eugenia; Shanghavi, Aditya; Gomez, Gerardo; Marley, Sherri; Mullis, Brian; Wachs, Juan

2016-01-01

Conventional surgical telementoring systems require the trainee to shift focus away from the operating field to a nearby monitor to receive mentor guidance. This paper presents the next generation of telementoring systems. Our system, STAR (System for Telementoring with Augmented Reality) avoids focus shifts by placing mentor annotations directly into the trainee's field of view using augmented reality transparent display technology. This prototype was tested with pre-medical and medical students. Experiments were conducted where participants were asked to identify precise operating field locations communicated to them using either STAR or a conventional telementoring system. STAR was shown to improve accuracy and to reduce focus shifts. The initial STAR prototype only provides an approximate transparent display effect, without visual continuity between the display and the surrounding area. The current version of our transparent display provides visual continuity by showing the geometry and color of the operating field from the trainee's viewpoint.

[Rehbein anterior resection in the treatment of Hirschsprung's congenital megacolon: Manual or stapler anastomosis - a comparative study].

PubMed

Holschneider, A M; Söylet, Y

1989-08-01

A prospective study was performed in 26 patients with Hirschsprung's disease operated on between 1984 and 1988 according to Rehbein but with a deep anterior anastomosis with a stapling device. The patients were compared with a group of 48 children with Hirschsprung's disease, operated on between 1978 and 1988, also according to Rehbein, but with a hand-sutured anastomosis. Postoperatively, the anastomosis performed by a stapling instrument that was larger and more elastic than the one sutured by hand. Early and later complications were less frequent in stapler anastomosis. Postoperatively, children with an autosuture anastomosis need a bouginage for 4 weeks (mean) whereas children with a hand sutured anastomosis had to be dilated for 12 weeks. Electromanometric studies in 10 children with a sutured and 8 with an autosutured anastomosis showed no physiological difference. Problems by performing autosuture-anastomosis in newborn with Hirschsprung's disease are discussed.

Improved planning of endoscopic sinonasal surgery from 3-dimensional images with Osirix® and stereolithography.

PubMed

Sánchez-Gómez, Serafín; Herrero-Salado, Tomás F; Maza-Solano, Juan M; Ropero-Romero, Francisco; González-García, Jaime; Ambrosiani-Fernández, Jesús

2015-01-01

The high variability of sinonasal anatomy requires the best knowledge of its three-dimensional (3D) conformation to perform surgery more safely and efficiently. The aim of the study was to validate the utility of Osirix® and stereolithography in improving endoscopic sinonasal surgery planning. Osirix® was used as a viewer and Digital Imaging and Communications in Medicine (DICOM) 3D imaging manager to improve planning for 114 sinonasal endoscopic operations with polyposis (86) and chronic rhinosinusitis (CRS) (28). Stereolithography rapid prototyping was used for 7 frontoethmoidal mucoceles. Using Osirix® and stereolithography, a greater number of anatomical structures were identified and this was done faster, with a statistically-significant clinical-radiological correlation (P<.01) compared with 2D CT plates. With a share of more than 75% of surgery performed by residents, surgical time was reduced by 38±12.3min in CRS and 42±27.9 in sinonasal polyposis. The fourth-year residents reached 100% surgical competence in critical surgical milestones with 16 surgeries (CI 12-19). The systematic use of Osirix® for visualisation and treatment of 3D sinonasal images from DICOM data files, along with the surgical team's ability to manipulate them as virtual reality, allows surgeons to perform endoscopic sinonasal surgery with greater confidence and in less time than using 2D images. Residents also achieve surgical competence faster, more safely and with fewer complications. This beneficial impact is increased when the surgical team has stereolithography rapid prototyping in more complex cases. Copyright © 2014 Elsevier España, S.L.U. and Sociedad Española de Otorrinolaringología y Patología Cérvico-Facial. All rights reserved.

Surgical energy device using steam jet for robotic assisted surgery.

PubMed

Yoshiki, Hitoshi; Tadano, Kotaro; Ban, Daisuke; Ohuchi, Katsuhiro; Tanabe, Minoru; Kawashima, Kenji

2015-01-01

In robotic assisted surgery, the carbonization and the adherence of coagulated tissues caused by surgical energy devices are problems. We propose a surgical energy device using a steam jet to solve the problems. The device applies a steam jet and performs coagulation and hemostasis. The exposed tissue is heated quickly with latent heat of the steam. The carbonization and the adherence of the tissue can be avoided. We prototyped a steam jet coagulator to prove the concept. The coagulator was mounted on the laparoscopic surgical robot. The effectiveness of the coagulation and hemostasis using steam was confirmed by the in vitro experiment on the chicken's liver and the in vivo experiments on the pig's spleen under the robotic assisted laparoscopic environment.

Palpation Simulator of Beating Aorta for Cardiovascular Surgery Training

NASA Astrophysics Data System (ADS)

Yamamoto, Yasuhiro; Nakao, Megumi; Kuroda, Tomohiro; Oyama, Hiroshi; Komori, Masaru; Matsuda, Tetsuya; Sakaguchi, Genichi; Komeda, Masashi; Takahashi, Takashi

In field of cardiovascular surgeries, palpation of aorta plays important roles in decision of surgical site.This paper develops palpation simulator of aorta based on a finite element based physical model.The proposed model calculates soft tissue deformation according to the affection of inner pressure and the operation of a surgeon.The proposed method is implemented on a prototype with dual PHANToM device.Experimental results confirmed our model achieves real time simulation of the surgical palpation.

Precision of a CAD/CAM-engineered surgical template based on a facebow for orthognathic surgery: an experiment with a rapid prototyping maxillary model.

PubMed

Lee, Jae-Won; Lim, Se-Ho; Kim, Moon-Key; Kang, Sang-Hoon

2015-12-01

We examined the precision of a computer-aided design/computer-aided manufacturing-engineered, manufactured, facebow-based surgical guide template (facebow wafer) by comparing it with a bite splint-type orthognathic computer-aided design/computer-aided manufacturing-engineered surgical guide template (bite wafer). We used 24 rapid prototyping (RP) models of the craniofacial skeleton with maxillary deformities. Twelve RP models each were used for the facebow wafer group and the bite wafer group (experimental group). Experimental maxillary orthognathic surgery was performed on the RP models of both groups. Errors were evaluated through comparisons with surgical simulations. We measured the minimum distances from 3 planes of reference to determine the vertical, lateral, and anteroposterior errors at specific measurement points. The measured errors were compared between experimental groups using a t test. There were significant intergroup differences in the lateral error when we compared the absolute values of the 3-D linear distance, as well as vertical, lateral, and anteroposterior errors between experimental groups. The bite wafer method exhibited little lateral error overall and little error in the anterior tooth region. The facebow wafer method exhibited very little vertical error in the posterior molar region. The clinical precision of the facebow wafer method did not significantly exceed that of the bite wafer method. Copyright © 2015 Elsevier Inc. All rights reserved.

Comparison of different bronchial closure techniques following pneumonectomy in dogs

PubMed Central

Bayram, A. Sami; Ozyigit, Ozgur; Gebitekin, Cengiz; Gorgul, O. Sacit

2007-01-01

The comparison of the histologic healing and bronchopleural fistula (BPF) complications encountered with three different BS closure techniques (manual suture, stapler and manual suture plus tissue flab) after pneumonectomy in dogs was investigated for a one-month period. The dogs were separated into two groups: group I (GI) (n = 9) and group II (GII) (n = 9). Right and left pneumonectomies were performed on the animals in GI and GII, respectively. Each group was further divided into three subgroups according to BS closure technique: subgroup I (SGI) (n = 3), manual suture; subgroup II (SGII) (n = 3), stapler; and subgroup III (SGIII) (n = 3), manual suture plus tissue flab. The dogs were sacrificed after one month of observation, and the bronchial stumps were removed for histological examination. The complications observed during a one-month period following pneumonectomy in nine dogs (n = 9) were: BPF (n = 5), peri-operative cardiac arrest (n = 1), post-operative respiratory arrest (n = 1), post-operative cardiac failure (n = 1) and cardio-pulmonary failure (n = 1). Histological healing was classified as complete or incomplete healing. Histological healing and BPF complications in the subgroups were analyzed statistically. There was no significant difference in histological healing between SGI and SGIII (p = 1.00; p > 0.05), nor between SGII and SGIII (p = 1.00; p > 0.05). Similarly, no significant difference was observed between the subgroups in terms of BPF (p = 0.945; p > 0.05). The results of the statistical analysis indicated that manual suture, stapler or manual suture plus tissue flab could be alternative methods for BS closure following pneumonectomy in dogs. PMID:17993754

Comparison of different bronchial closure techniques following pneumonectomy in dogs.

PubMed

Salci, Hakan; Bayram, A Sami; Ozyigit, Ozgur; Gebitekin, Cengiz; Gorgul, O Sacit

2007-12-01

The comparison of the histologic healing and bronchopleural fistula (BPF) complications encountered with three different BS closure techniques (manual suture, stapler and manual suture plus tissue flab) after pneumonectomy in dogs was investigated for a one-month period. The dogs were separated into two groups: group I (GI) (n = 9) and group II (GII) (n = 9). Right and left pneumonectomies were performed on the animals in GI and GII, respectively. Each group was further divided into three subgroups according to BS closure technique: subgroup I (SGI) (n = 3), manual suture; subgroup II (SGII) (n = 3), stapler; and subgroup III (SGIII) (n = 3), manual suture plus tissue flab. The dogs were sacrificed after one month of observation, and the bronchial stumps were removed for histological examination. The complications observed during a one-month period following pneumonectomy in nine dogs (n = 9) were: BPF (n = 5), peri-operative cardiac arrest (n = 1), post-operative respiratory arrest (n = 1), post-operative cardiac failure (n = 1) and cardio-pulmonary failure (n = 1). Histological healing was classified as complete or incomplete healing. Histological healing and BPF complications in the subgroups were analyzed statistically. There was no significant difference in histological healing between SGI and SGIII (p = 1.00; p > 0.05), nor between SGII and SGIII (p = 1.00; p > 0.05). Similarly, no significant difference was observed between the subgroups in terms of BPF (p = 0.945; p > 0.05). The results of the statistical analysis indicated that manual suture, stapler or manual suture plus tissue flab could be alternative methods for BS closure following pneumonectomy in dogs.

Sutureless functional end-to-end anastomosis using a linear stapler with polyglycolic acid felt for intestinal anastomoses.

PubMed

Naito, Masanori; Miura, Hirohisa; Nakamura, Takatoshi; Sato, Takeo; Yamanashi, Takahiro; Tsutsui, Atsuko; Watanabe, Masahiko

2017-05-01

Gastrointestinal anastomosis remains associated with a considerable burden of morbidity and, in some cases, mortality. Functional end-to-end anastomosis, whilst extremely efficient, is vulnerable to increased intestinal pressure in the immediate postoperative period, which may predispose to development of anastomotic leakage or bleeding. Therefore, there is a requirement for new techniques that facilitate safe and efficacious anastomotic procedures. This study examined the clinical application of functional end-to-end anastomosis with a stapler that automatically applies a bioabsorbable polyglycolic acid sheet (Endo GIA™ Reinforced Reload with Tri-Staple™ Technology). A porcine model was used to examine functional end-to-end anastomosis with and without application of a bioabsorbable polyglycolic acid sheet. As the crotch of the anastomosis is considered the weakest point, a probe was used to test the integrity of these anastomoses. Furthermore, we performed functional end-to-end anastomosis using the Endo GIA™ Reinforced stapler in a clinical series of 20 patients undergoing gastrointestinal tract resection. In all cases, functional end-to-end anastomosis was performed without suture reinforcement. Small intestine anastomoses in the animal study exhibited no weakness at the crotch of the anastomosis, as tested with a probe, suggesting an increased resiliency to conventional complications of functional end-to-end anastomosis. In the clinical population, no postoperative complications were noted. No adhesive intestinal obstruction was noted. Sutureless functional end-to-end anastomosis using the Endo GIA™ Reinforced appears to be safe, efficacious, and straightforward. Reinforcement of the crotch site with a bioabsorbable polyglycolic acid sheet appears to mitigate conventional problems with crotch-site vulnerability.

Signal intensity of the pancreas on magnetic resonance imaging: Prediction of postoperative pancreatic fistula after a distal pancreatectomy using a triple-row stapler.

PubMed

Arai, Takuma; Kobayashi, Akira; Yokoyama, Takahide; Ohya, Ayumi; Fujinaga, Yasunari; Shimizu, Akira; Motoyama, Hiroaki; Furusawa, Norihiko; Sakai, Hiroshi; Uehara, Takeshi; Kadoya, Masumi; Miyagawa, Shin-Ichi

2015-01-01

The aim of this study was to evaluate the impact of the pancreatic signal intensity (SI) on magnetic resonance imaging (MRI) findings for predicting the development of pancreatic fistula (PF) after a distal pancreatectomy (DP) involving a triple-row stapler closure. A multivariate logistic regression analysis was used to identify risk factors for clinical PF, as defined by the International Study Group on Pancreatic Fistula grade B or C. The pancreas-to-muscle SI ratio was evaluated using fat-suppressed T1-weighted MRI. Of the 41 enrolled patients, 8 (19.5%) developed clinical PF. The pancreatic thickness (≥15 mm) and SI ratio (≥1.3) were identified as independent predictors of clinical PF in a multivariate analysis. Clinical PF was observed in one patient with a thick pancreas and a low SI ratio (14.3%), whereas it was observed in 60% of the patients with a thick pancreas and a high SI ratio. The area under the receiver operating characteristic curve for a predictive model consisting of the two factors was 0.87 (95% confidence interval, 0.75 to 0.99), the level of which tended to be greater than that for pancreatic thickness alone (0.81, p = 0.09). The SI ratio as evaluated using MRI might be useful for predicting clinical PF in patients with the pancreatic thickness ≥15 mm after DP involving a stapler closure. Copyright © 2015 IAP and EPC. Published by Elsevier B.V. All rights reserved.

Virtual Cerebral Aneurysm Clipping with Real-Time Haptic Force Feedback in Neurosurgical Education.

PubMed

Gmeiner, Matthias; Dirnberger, Johannes; Fenz, Wolfgang; Gollwitzer, Maria; Wurm, Gabriele; Trenkler, Johannes; Gruber, Andreas

2018-04-01

Realistic, safe, and efficient modalities for simulation-based training are highly warranted to enhance the quality of surgical education, and they should be incorporated in resident training. The aim of this study was to develop a patient-specific virtual cerebral aneurysm-clipping simulator with haptic force feedback and real-time deformation of the aneurysm and vessels. A prototype simulator was developed from 2012 to 2016. Evaluation of virtual clipping by blood flow simulation was integrated in this software, and the prototype was evaluated by 18 neurosurgeons. In 4 patients with different medial cerebral artery aneurysms, virtual clipping was performed after real-life surgery, and surgical results were compared regarding clip application, surgical trajectory, and blood flow. After head positioning and craniotomy, bimanual virtual aneurysm clipping with an original forceps was performed. Blood flow simulation demonstrated residual aneurysm filling or branch stenosis. The simulator improved anatomic understanding for 89% of neurosurgeons. Simulation of head positioning and craniotomy was considered realistic by 89% and 94% of users, respectively. Most participants agreed that this simulator should be integrated into neurosurgical education (94%). Our illustrative cases demonstrated that virtual aneurysm surgery was possible using the same trajectory as in real-life cases. Both virtual clipping and blood flow simulation were realistic in broad-based but not calcified aneurysms. Virtual clipping of a calcified aneurysm could be performed using the same surgical trajectory, but not the same clip type. We have successfully developed a virtual aneurysm-clipping simulator. Next, we will prospectively evaluate this device for surgical procedure planning and education. Copyright © 2018 Elsevier Inc. All rights reserved.

3D Volume Rendering and 3D Printing (Additive Manufacturing).

PubMed

Katkar, Rujuta A; Taft, Robert M; Grant, Gerald T

2018-07-01

Three-dimensional (3D) volume-rendered images allow 3D insight into the anatomy, facilitating surgical treatment planning and teaching. 3D printing, additive manufacturing, and rapid prototyping techniques are being used with satisfactory accuracy, mostly for diagnosis and surgical planning, followed by direct manufacture of implantable devices. The major limitation is the time and money spent generating 3D objects. Printer type, material, and build thickness are known to influence the accuracy of printed models. In implant dentistry, the use of 3D-printed surgical guides is strongly recommended to facilitate planning and reduce risk of operative complications. Copyright © 2018 Elsevier Inc. All rights reserved.

[An alternative continence mechanism for continent catheterisable micturation].

PubMed

Honeck, P; Alken, P

2010-01-01

The creation of a stable, reliable, continent and easily catheterisable continence mechanism is an essential prerequisite for the construction of a continent cutaneous urinary reservoir. Although a substantial number of surgical methods has been described, construction is still a complex surgical procedure. The aim of this study was the evaluation of a new method for a continence mechanism using stapled small or large intestine. Small and large pig intestine was used for construction. For stapling the tube a 3 cm or 6 cm double row stapling system was used. Two variations using small and large intestine segments were constructed (IL 1, COL 1, COL 2). A 3 or 6 cm long stapler line was placed alongside a 12 Fr catheter positioned at the antimesenterial side creating a partially two-luminal segment. The open end of the non-catheterised lumen and the opposite intestinal end were closed by continuous sutures. The created tube was then embedded into the pouch. Pressure evaluation was performed for each variation. Intermittent external manual compression was used to simulate sudden pressure exposure. Construction times for the IL 1 and COL 1 variations were 10 +/- 1.5 min and 6.2 +/- 1.3 min for COL 2. All variations showed no leakage during filling or external compression. The maximum capacity was lower for the IL 1 compared to the COL variation. The maximum pressure levels reached did not differ significantly. The described technique is an easy and fast method to construct a continent and easy to catheterize continence mechanism using small or large intestine.

Proximal Leakage After Laparoscopic Sleeve Gastrectomy: an Analysis of Preoperative and Operative Predictors on 1738 Consecutive Procedures.

PubMed

Cesana, Giovanni; Cioffi, Stefano; Giorgi, Riccardo; Villa, Roberta; Uccelli, Matteo; Ciccarese, Francesca; Castello, Giorgio; Scotto, Bruno; Olmi, Stefano

2018-03-01

The purpose of this paper was to search for predictive factors for proximal leakage after laparoscopic sleeve gastrectomy (LSG) in a large cohort from a single referral center. One thousand seven hundred and thirty-eight patients, collected in a prospectively held database from 2008 to 2016, were retrospectively analyzed. The correlation between postoperative leakage and both preoperative (age, gender, height, weight, BMI, and obesity-related morbidities) and operative variables (the distance from pylorus at which the gastric section was started, operative time, experience of surgeons who performed the LSG, and the surgical materials used) was analyzed. The experience of the surgeons was calculated in the number of LSGs performed. The surgical materials considered were stapler, cartridges, and reinforcement of the suture. Proximal leakage was observed in 45 patients out of 1738 (2.6%). No correlation was found between leakage and the preoperative variables analyzed. The operative variables that were found to be associated with lower incidence of leakage at the multivariate analysis (p < 0.05) were the reinforcement of the staple line (or overriding suture or buttressing materials) and the experience of the surgeons. A distance of less than 2 cm from the pylorus resulted to be significantly related to a higher incidence of fistula at the univariate analysis. In this large consecutive cohort study of LSG, proximal staple line reinforcement (buttress material or suture) reduced the risk of a leak. The risk of a proximal leak was much higher in the surgeons first 100 cases, which has implications for training and supervision during this "learning curve" period.

[Discussion on standardized implementation of laparoscopic radical lymphadenectomy for distal gastric cancer].

PubMed

Lyu, Zejian; Wang, Junjiang; Li, Yong

2017-08-25

Laparoscopic radical gastrectomy for gastric cancer has been widely applied in clinical practice, and its indications have been extended from early gastric cancer to advanced gastric cancer. It is acknowledged that laparoscopic radical gastrectomy is technically challenging because of the complexity of anatomy, rich blood supply, and extensive lymph node dissection. This paper primarily intends to share the experience of laparoscopic radical D2 gastrectomy for distal gastric cancer with details of choosing the location of Trocar, surgical approaches and the sequence of lymph node dissection. All the surgeries were performed at Department of General Surgery and Gastrointestinal Surgery, Guangdong General Hospital. The finding suggests that a correct laparoscopic Trocar placement is the foundation of adequate surgical field visualization. Under most circumstances, the observation hole should be around 2 cm below the umbilicus and the operating hole should be close to the bilateral clavicle midline. Furthermore, proper surgical approach and sequence of lymph node dissection are the prerequisites for successful laparoscopic radical D2 gastrectomy, as well as the reassurance of dissecting lymph node safely and comprehensively. The position of surgical team adopted in our center is that the surgeon stands to the left of the patient, with laparoscope operator stands in between patient's legs while the first assistant positions himself opposite the surgeon on the right side of the patient. This position correlates to the rules of sequential lymph node dissection, which is "from left to right", "from proximal to distal" and "from inferior to superior". Therefore, it is conductive to inferior and superior pylorus region dissection and it can effectively prevent subsidiary-injury. In our center, the procedure of lymph node dissection has been standardized: the initial step is to undergo station 4sb dissection and greater gastric curvature clearance; then change the patient's position to clean the sub-pyloric lymph node region and cut off the duodenum by linear stapler; followed by the clearance of inferior region of the pylorus and the upper margin of the pancreas; in the final step, the first and the third groups of lymph node dissection is performed. Although varied surgical approaches and sequences of lymph node dissection are applied in different hospitals, the techniques required for laparoscopic D2 radical gastrectomy for gastric cancer are sophisticated and advanced in general. Radical lymph node dissection is complicated, urging surgeons to familiarize themselves with the anatomy of gastric peripheral vascular system and characteristics of lymph node drainage. By designing and implementing effective strategies, such as formulating a regular team, positioning surgical team reasonably, changing a patient's posture during operation, choosing an appropriate surgical approach and following a logically sequence of lymph node dissection, surgeons can standardize the complete surgical procedure, which ultimately reduces bleeding during surgery and shortens the operative time.

Research and implementation of a new 6-DOF light-weight robot

NASA Astrophysics Data System (ADS)

Tao, Zihang; Zhang, Tao; Qi, Mingzhong; Ji, Junhui

2017-06-01

Traditional industrial robots have some weaknesses such as low payload-weight, high power consumption and high cost. These drawbacks limit their applications in such areas, special application, service and surgical robots. To improve these shortcomings, a new kind 6-DOF light-weight robot was designed based on modular joints and modular construction. This paper discusses the general requirements of the light-weight robots. Based on these requirements the novel robot is designed. The new robot is described from two aspects, mechanical design and control system. A prototype robot had developed and a joint performance test platform had designed. Position and velocity tests had conducted to evaluate the performance of the prototype robot. Test results showed that the prototype worked well.

Contingency Contracting Guide/Lessons for Navy Contracting Officers

DTIC Science & Technology

2004-06-01

objective. The late Secretary Ron Brown, and many other government and industry leaders sacrificed their lives pursuing the economic...telephones and copiers. Office supplies such as paper, pens, staplers and staples, date stamps, post-it notes, three ring binders, hole punchers

Laparoscopic transumbilical gastrojejunostomy: an advanced anastomotic procedure performed through a single site.

PubMed

Nguyen, Ninh T; Slone, Johnathan; Reavis, Kevin M; Woolridge, James; Smith, Brian R; Chang, Ken

2009-04-01

Single-site laparoscopic surgery and natural orifice transumbilical surgery (NOTUS) have become exciting areas of surgical development. However, most reported case series consist of basic laparoscopic procedures, such as cholecystectomy and appendectomy. In this paper, we present the case of an advanced laparoscopic operation-construction of a gastrointestinal anastomosis-that was performed through ports placed entirely within the umbilicus. In this paper, we describe a 61-year-old male with a history of advanced pancreatic carcinoma who was referred with a gastric outlet obstruction. A laparoscopic gastrojejunostomy bypass, using a linear stapler with suture closure of the enterotomy, was performed through three abdominal trocars placed entirely within the umbilicus. Some potential advantages of NOTUS palliative gastrojejunostomy include reduced postoperative pain and the lack of visible abdominal scars. The operation was completed uneventfully in 40 minutes. The patient recovered without complications and was discharged on postoperative day 2. At 1-month follow-up, the patient had improved oral intake without any further vomiting symptoms. This case report documents the feasibility of an advanced anastomotic gastrojejunostomy procedure which can be performed through a single site. However, benefits of this approach, compared to conventional laparoscopic procedures, will require a prospective randomized clinical trial.

A standardized safe hepatectomy; selective Glissonean transection using endolinear stapling devices.

PubMed

Fujii, Masahiko; Shimada, Mitsuo; Satoru, Imura; Morine, Yuji; Ikemoto, Tetsuya; Soejima, Yuji

2007-01-01

Selective clamping of Glisson's pedicle at the hilum is effective for systematized hepatectomy. Because of the development of stapling devices, a Glissonean transection using a surgical stapler has been used widely. However, the risk of accidental stapling of the biliary confluence still remains. In this paper we report about a case that underwent selective Glissonean transection using an endolinear stapling device. We used this standardized technique in five patients without any major complications. The particular case to which we refer was a 71-year-old woman with hepatocellular carcinoma in the right lobe. The anterior and posterior branches of Glisson's pedicle were independently divided using an endolinear stapling device. The right hepatic lobectomy was achieved with little bleeding and in addition there was a shortened operation time and the postoperative course was uneventful. In the patient with liver cirrhosis, postoperative complications often related to liver failure. We herein advocate a standardized safe hepatectomy using endolinear stapling devices. We believe that the shortened operative time and decreased risk of complications by selective Glissonean transection as well as hepatic vein transection using stapling devices contribute to the improved short-term outcome.

[Laparoscopic Local Resection for a Gastric GIST with Ulcer Locating Near to the Esophagogastric Junction - A Case Report].

PubMed

Tanaka, Yoshihiro; Kosuga, Toshiyuki; Komatsu, Shuhei; Okamoto, Kazuma; Shoda, Katsutoshi; Arita, Tomohiro; Konishi, Hirotaka; Morimura, Ryo; Murayama, Yasutoshi; Shiozaki, Atsushi; Kuriu, Yoshiaki; Ikoma, Hisashi; Nakanishi, Masayoshi; Fujiwara, Hitoshi; Otsuji, Eigo

2017-11-01

A 39-year-old woman visited our hospital because of epigastric pain. Gastrointestinal endoscopy revealed a gastric submucosal tumor, 30mm in size, with ulcer locating near to the esophagogastric junction, and it was diagnosed with GIST by the endoscopic ultrasonography-guided fine needle aspiration. Then, she underwent laparoscopic surgery for the removal of gastric GIST. After peeling around the upper stomach, the local resection of the stomach was performed with linear staplers in the minor axis direction under the vision of the endoscope and laparoscope. Histopathological examinations confirmed that the tumor was GIST with an intermediate risk, and all surgical margins were free of GIST cells. Local resection with the laparoscopy endoscopy cooperative surgery(LECS)technique is a very useful way of the removal of gastric GISTs locating near to the esophagogastric junction in terms of the remnant gastric functions. Meanwhile, because the standard LECS requires the opening of the gastric lumen, there remains concerns about the intraperitoneal tumor dissemination for the gastric GIST with ulcer. We herein reported a case of laparoscopic local resection for a gastric GIST with ulcer locating near to the esophagogastric junction without gastric opening.

Recent development on computer aided tissue engineering--a review.

PubMed

Sun, Wei; Lal, Pallavi

2002-02-01

The utilization of computer-aided technologies in tissue engineering has evolved in the development of a new field of computer-aided tissue engineering (CATE). This article reviews recent development and application of enabling computer technology, imaging technology, computer-aided design and computer-aided manufacturing (CAD and CAM), and rapid prototyping (RP) technology in tissue engineering, particularly, in computer-aided tissue anatomical modeling, three-dimensional (3-D) anatomy visualization and 3-D reconstruction, CAD-based anatomical modeling, computer-aided tissue classification, computer-aided tissue implantation and prototype modeling assisted surgical planning and reconstruction.

Development of an intelligent surgical training system for Thoracentesis.

PubMed

Nakawala, Hirenkumar; Ferrigno, Giancarlo; De Momi, Elena

2018-01-01

Surgical training improves patient care, helps to reduce surgical risks, increases surgeon's confidence, and thus enhances overall patient safety. Current surgical training systems are more focused on developing technical skills, e.g. dexterity, of the surgeons while lacking the aspects of context-awareness and intra-operative real-time guidance. Context-aware intelligent training systems interpret the current surgical situation and help surgeons to train on surgical tasks. As a prototypical scenario, we chose Thoracentesis procedure in this work. We designed the context-aware software framework using the surgical process model encompassing ontology and production rules, based on the procedure descriptions obtained through textbooks and interviews, and ontology-based and marker-based object recognition, where the system tracked and recognised surgical instruments and materials in surgeon's hands and recognised surgical instruments on the surgical stand. The ontology was validated using annotated surgical videos, where the system identified "Anaesthesia" and "Aspiration" phase with 100% relative frequency and "Penetration" phase with 65% relative frequency. The system tracked surgical swab and 50mL syringe with approximately 88.23% and 100% accuracy in surgeon's hands and recognised surgical instruments with approximately 90% accuracy on the surgical stand. Surgical workflow training with the proposed system showed equivalent results as the traditional mentor-based training regime, thus this work is a step forward a new tool for context awareness and decision-making during surgical training. Copyright © 2017 Elsevier B.V. All rights reserved.

Radiophotoluminescent and Tenebrescent Glasses

DTIC Science & Technology

1951-11-24

Mineral Industries | Pennsylvania State College State College, Pennsylvania -j-- Copy No. 42 < Dr; G. Monk Senior Physicist , Remote Control...the quaternary system A^Og-ELO-? P2Oc-BaO, In order to better understand this fact stapler binary and ternary compositions were considered, The

Staple line reinforcement during sleeve gastrectomy with a new type of reinforced stapler.

PubMed

El Moussaoui, Imad; Limbga, Augustin; Mehdi, Abdelilah

2018-04-01

Bleeding and staple-line leak, are the most common complications of laparoscopic sleeve gastrectomy. To decrease the incidence of this complications, a variety of intraoperative reinforcement of staple line is used. Reinforced GIA™ is a new automatic suture device with pre-attached synthetic tissue reinforcement, but no study has evaluated its use in sleeve gastrectomy. The objective of this study is to evaluate the efficacy and safety of this new staple line reinforcement technique in laparoscopic sleeve gastrectomy. We conducted a retrospective review of 290 patients who underwent laparoscopic sleeve gastrectomy between January 2013 and January 2016 in which reinforced GIA™ or standard GIA™ was used. Patients preoperative characteristics, Operative time, staple line leaks, staple line bleeds, stenosis, and complications requiring reoperation were collected. A total of 187 laparoscopic sleeve gastrectomy were performed with standard GIA and 103 with reinforced GIA™. Patient characteristics were not significantly different between the groups. The average operating time in the standard GIA group is 57.41±16.44 min against 50.9±14.12 min in the reinforced GIA group (P=0.006). Two staple line leaks developed in the standard GIA group and reoperated against no patients in the reinforced GIA group, without significant difference between the both groups (P=0.66). Staple line bleeds are less in the reinforced GIA group, only 23 (22.3%) against 78 (41.7%) cases in the standard GIA group (P=0.001). No patients of both groups developed gastric sleeve stenosis. During laparoscopic sleeve gastrectomy, the use of a reinforced stapler significantly reduces the operative time and staple line bleeding. No significant difference is evidenced in terms of reduction of staple line leaks with this reinforced stapler.

Efficacy and safety of a NiTi CAR 27 compression ring for end-to-end anastomosis compared with conventional staplers: A real-world analysis in Chinese colorectal cancer patients.

PubMed

Lu, Zhenhai; Peng, Jianhong; Li, Cong; Wang, Fulong; Jiang, Wu; Fan, Wenhua; Lin, Junzhong; Wu, Xiaojun; Wan, Desen; Pan, Zhizhong

2016-05-01

This study aimed to evaluate the safety and efficacy of a new nickel-titanium shape memory alloy compression anastomosis ring, NiTi CAR 27, in constructing an anastomosis for colorectal cancer resection compared with conventional staples. In total, 234 consecutive patients diagnosed with colorectal cancer receiving sigmoidectomy and anterior resection for end-to-end anastomosis from May 2010 to June 2012 were retrospectively analyzed. The postoperative clinical parameters, postoperative complications and 3-year overall survival in 77 patients using a NiTi CAR 27 compression ring (CAR group) and 157 patients with conventional circular staplers (STA group) were compared. There were no statistically significant differences between the patients in the two groups in terms of general demographics and tumor features. A clinically apparent anastomotic leak occurred in 2 patients (2.6%) in the CAR group and in 5 patients (3.2%) in the STA group (p=0.804). These eight patients received a temporary diverting ileostomy. One patient (1.3%) in the CAR group was diagnosed with anastomotic stricture through an electronic colonoscopy after 3 months postoperatively. The incidence of postoperative intestinal obstruction was comparable between the two groups (p=0.192). With a median follow-up duration of 39.6 months, the 3-year overall survival rate was 83.1% in the CAR group and 89.0% in the STA group (p=0.152). NiTi CAR 27 is safe and effective for colorectal end-to-end anastomosis. Its use is equivalent to that of the conventional circular staplers. This study suggests that NiTi CAR 27 may be a beneficial alternative in colorectal anastomosis in Chinese colorectal cancer patients.

Influence of stapling the intersegmental planes on lung volume and function after segmentectomy.

PubMed

Tao, Hiroyuki; Tanaka, Toshiki; Hayashi, Tatsuro; Yoshida, Kumiko; Furukawa, Masashi; Yoshiyama, Koichi; Okabe, Kazunori

2016-10-01

Dividing the intersegmental planes with a stapler during pulmonary segmentectomy leads to volume loss in the remnant segment. The aim of this study was to assess the influence of segment division methods on preserved lung volume and pulmonary function after segmentectomy. Using image analysis software on computed tomography (CT) images of 41 patients, the ratio of remnant segment and ipsilateral lung volume to their preoperative values (R-seg and R-ips) was calculated. The ratio of postoperative actual forced expiratory volume in 1 s (FEV1) and forced vital capacity (FVC) per those predicted values based on three-dimensional volumetry (R-FEV1 and R-FVC) was also calculated. Differences in actual/predicted ratios of lung volume and pulmonary function for each of the division methods were analysed. We also investigated the correlations of the actual/predicted ratio of remnant lung volume with that of postoperative pulmonary function. The intersegmental planes were divided by either electrocautery or with a stapler in 22 patients and with a stapler alone in 19 patients. Mean values of R-seg and R-ips were 82.7 (37.9-140.2) and 104.9 (77.5-129.2)%, respectively. The mean values of R-FEV1 and R-FVC were 103.9 (83.7-135.1) and 103.4 (82.2-125.1)%, respectively. There were no correlations between the actual/predicted ratio of remnant lung volume and pulmonary function based on the division method. Both R-FEV1 and R-FVC were correlated not with R-seg, but with R-ips. Stapling does not lead to less preserved volume or function than electrocautery in the division of the intersegmental planes. © The Author 2016. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Applications of patient-specific 3D printing in medicine.

PubMed

Heller, Martin; Bauer, Heide-Katharina; Goetze, Elisabeth; Gielisch, Matthias; Roth, Klaus E; Drees, Philipp; Maier, Gerrit S; Dorweiler, Bernhard; Ghazy, Ahmed; Neufurth, Meik; Müller, Werner E G; Schröder, Heinz C; Wang, Xiaohong; Vahl, Christian-Friedrich; Al-Nawas, Bilal

Already three decades ago, the potential of medical 3D printing (3DP) or rapid prototyping for improved patient treatment began to be recognized. Since then, more and more medical indications in different surgical disciplines have been improved by using this new technique. Numerous examples have demonstrated the enormous benefit of 3DP in the medical care of patients by, for example, planning complex surgical interventions preoperatively, reducing implantation steps and anesthesia times, and helping with intraoperative orientation. At the beginning of every individual 3D model, patient-specific data on the basis of computed tomography (CT), magnetic resonance imaging (MRI), or ultrasound data is generated, which is then digitalized and processed using computer-aided design/computer-aided manufacturing (CAD/CAM) software. Finally, the resulting data sets are used to generate 3D-printed models or even implants. There are a variety of different application areas in the various medical fields, eg, drill or positioning templates, or surgical guides in maxillofacial surgery, or patient-specific implants in orthopedics. Furthermore, in vascular surgery it is possible to visualize pathologies such as aortic aneurysms so as to improve the planning of surgical treatment. Although rapid prototyping of individual models and implants is already applied very successfully in regenerative medicine, most of the materials used for 3DP are not yet suitable for implantation in the body. Therefore, it will be necessary in future to develop novel therapy approaches and design new materials in order to completely reconstruct natural tissue.

Additive manufacturing.

PubMed

Mumith, A; Thomas, M; Shah, Z; Coathup, M; Blunn, G

2018-04-01

Increasing innovation in rapid prototyping (RP) and additive manufacturing (AM), also known as 3D printing, is bringing about major changes in translational surgical research. This review describes the current position in the use of additive manufacturing in orthopaedic surgery. Cite this article: Bone Joint J 2018;100-B:455-60.

The double stapling technique for low anterior resection. Results, modifications, and observations.

PubMed Central

Griffen, F D; Knight, C D; Whitaker, J M; Knight, C D

1990-01-01

Since the introduction of the end-to-end anastomosis (EEA) stapler for rectal reconstruction, we have used a modification of the conventional technique in which the lower rectal segment is closed with the linear stapler (TA-55) and the anastomosis is performed using the EEA instrument across the linear staple line (double stapling technique). Our experience with this procedure includes stapled colorectal anastomoses in 75 patients and is the basis for the report. This review presents the details and advantages of the technique and the results. Complications include two patients with anastomotic leak (2.7%), and two with stenosis that required treatment (2.7%). Protective colostomy was not done in this series. There were no deaths. Our experience and that of others suggests that this modification of the EEA technique can allow a lower anastomosis in some patients, and that it can be done with greater safety and facility. Images Fig. 1. Fig. 2. Fig. 3. Fig. 4. Fig. 5. Fig. 6. PMID:2357137

Laparoscopic and thoracoscopic esophagectomy with intrathoracic anastomosis for middle or lower esophageal carcinoma

PubMed Central

Ai, Bo; Zhang, Zheng

2014-01-01

Thoracoscopic mobilization of esophagus and laparoscopic mobilization of stomach with cervical anastomosis is employed widely in minimally invasive esophagectomy (MIE) for esophageal carcinoma. However, it is associated with high incidence of complications, including recurrent laryngeal nerve injury and anastomotic leak. This paper summarizes the key techniques in total laparoscopic and thoracoscopic esophagectomy with intrathoracic anastomosis for MIE in 62 patients of middle or lower esophageal cancer between March 2012 and August 2013. Total laparoscopic and thoracoscopic esophagectomy with intrathoracic anastomosis was performed to treat the middle or lower esophageal cancer. Laparoscopic and thoracoscopic Ivor-Lewis esophagectomy was performed using a circular stapler (Johnson and Johnson) intrathoracically to staple esophagogastric anastomosis and reconstruct the digestive tract. In addition, we performed tension-relieving anastomotic suture and embedded with pedicled omental flap. Compared with the trans-orally inserted anvil (OrVil) approach, the technique reported here is safe, feasible and user-friendly. Total thoracoscopic intrathoracic anastomosis can be performed with a circular stapler (Johnson and Johnson). PMID:25276383

Laparoscopic and thoracoscopic esophagectomy with intrathoracic anastomosis for middle or lower esophageal carcinoma.

PubMed

Ai, Bo; Zhang, Zheng; Liao, Yongde

2014-09-01

Thoracoscopic mobilization of esophagus and laparoscopic mobilization of stomach with cervical anastomosis is employed widely in minimally invasive esophagectomy (MIE) for esophageal carcinoma. However, it is associated with high incidence of complications, including recurrent laryngeal nerve injury and anastomotic leak. This paper summarizes the key techniques in total laparoscopic and thoracoscopic esophagectomy with intrathoracic anastomosis for MIE in 62 patients of middle or lower esophageal cancer between March 2012 and August 2013. Total laparoscopic and thoracoscopic esophagectomy with intrathoracic anastomosis was performed to treat the middle or lower esophageal cancer. Laparoscopic and thoracoscopic Ivor-Lewis esophagectomy was performed using a circular stapler (Johnson and Johnson) intrathoracically to staple esophagogastric anastomosis and reconstruct the digestive tract. In addition, we performed tension-relieving anastomotic suture and embedded with pedicled omental flap. Compared with the trans-orally inserted anvil (OrVil) approach, the technique reported here is safe, feasible and user-friendly. Total thoracoscopic intrathoracic anastomosis can be performed with a circular stapler (Johnson and Johnson).

Disrupted rhythms and mobile ICT in a surgical department.

PubMed

Hasvold, Per Erlend; Scholl, Jeremiah

2011-08-01

This study presents a study of mobile information and communication technology (ICT) for healthcare professionals in a surgical ward. The purpose of the study was to create a participatory design process to investigate factors that affect the acceptance of mobile ICT in a surgical ward. Observations, interviews, a participatory design process, and pilot testing of a prototype of a co-constructed application were used. Informal rhythms existed at the department that facilitated that people met and interacted several times throughout the day. These gatherings allowed for opportunistic encounters that were extensively used for dialogue, problem solving, coordination, message and logistics handling. A prototype based on handheld mobile computers was introduced. The tool supported information seeking functionality that previously required local mobility. By making the nurses more freely mobile, the tool disrupted these informal rhythms. This created dissatisfaction with the system, and lead to discussion and introduction of other arenas to solve coordination and other problems. Mobile ICT tools may break down informal communication and coordination structures. This may reduce the efficiency of the new tools, or contribute to resistance towards such systems. In some situations however such "disrupted rhythms" may be overcome by including additional sociotechnical mechanisms in the overall design to counteract this negative side-effect. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

New Directions in 3D Medical Modeling: 3D-Printing Anatomy and Functions in Neurosurgical Planning

PubMed Central

Árnadóttir, Íris; Gíslason, Magnús; Ólafsson, Ingvar

2017-01-01

This paper illustrates the feasibility and utility of combining cranial anatomy and brain function on the same 3D-printed model, as evidenced by a neurosurgical planning case study of a 29-year-old female patient with a low-grade frontal-lobe glioma. We herein report the rapid prototyping methodology utilized in conjunction with surgical navigation to prepare and plan a complex neurosurgery. The method introduced here combines CT and MRI images with DTI tractography, while using various image segmentation protocols to 3D model the skull base, tumor, and five eloquent fiber tracts. This 3D model is rapid-prototyped and coregistered with patient images and a reported surgical navigation system, establishing a clear link between the printed model and surgical navigation. This methodology highlights the potential for advanced neurosurgical preparation, which can begin before the patient enters the operation theatre. Moreover, the work presented here demonstrates the workflow developed at the National University Hospital of Iceland, Landspitali, focusing on the processes of anatomy segmentation, fiber tract extrapolation, MRI/CT registration, and 3D printing. Furthermore, we present a qualitative and quantitative assessment for fiber tract generation in a case study where these processes are applied in the preparation of brain tumor resection surgery. PMID:29065569

Ergonomic design in the operating room: information technologies

NASA Astrophysics Data System (ADS)

Morita, Mark M.; Ratib, Osman

2005-04-01

The ergonomic design in the Surgical OR of information technology systems has been and continues to be a large problem. Numerous disparate information systems with unique hardware and display configurations create an environment similar to the chaotic environments of air traffic control. Patient information systems tend to show all available statistics making it difficult to isolate the key, relevant vitals for the patient. Interactions in this sterile environment are still being done with the traditional keyboard and mouse designed for cubicle office workflows. This presentation will address the shortcomings of the current design paradigm in the Surgical OR that relate to Information Technology systems. It will offer a perspective that addresses the ergonomic deficiencies and predicts how future technological innovations will integrate into this vision. Part of this vision includes a Surgical OR PACS prototype, developed by GE Healthcare Technologies, that addresses ergonomic challenges of PACS in the OR that include lack of portability, sterile field integrity, and UI targeted for diagnostic radiologists. GWindows (gesture control) developed by Microsoft Research and Voice command will allow for the surgeons to navigate and review diagnostic imagery without using the conventional keyboard and mouse that disrupt the integrity of the sterile field. This prototype also demonstrates how a wireless, battery powered, self contained mobile PACS workstation can be optimally positioned for a surgeon to reference images during an intervention as opposed to the current pre-operative review. Lessons learned from the creation of the Surgical OR PACS Prototype have demonstrated that PACS alone is not the end all solution in the OR. Integration of other disparate information systems and presentation of this information in simple, easy to navigate information packets will enable smoother interactions for the surgeons and other healthcare professionals in the OR. More intuitive IT system interaction is required for all the key players in the OR not just the surgeons. To improve interactions, there are a number of emerging technologies that have the potential to revolutionize the way healthcare professionals interact with computer-based applications in the Surgical OR. A number of these technologies will enable surgeons to interact with vital data without interrupting the sterile field or maneuvering their bodies to view relevant information - information will automatically display for healthcare individuals in a just-in-time manner without navigational challenges.

[NOTES ASSISTED ENDOLUMENAL RECTAL RESECTION AND SPECIMEN EXTRACTION WITHOUT RECTAL STUMP OPENING - OUR EXPERIENCE WITH THIS NOVEL TECHNIQUE IN A PORCINE MODEL].

PubMed

Kvasha, Anton; Rosenthal, Eyal; Khalifa, Muhammad; Waksman, Igor

2017-05-01

Laparoscopic surgery has long been used for colon and rectal resection, and the laparoscopic-assisted approach has prevailed in surgical practice. While this technique includes the fashioning of an intra-corporeal anastomosis, it still requires an abdominal incision for specimen extraction. Elimination of the abdominal incision and its potential complications has been the motivation for the development of natural orifice specimen extraction (NOSE) techniques. Many of these techniques make use of an open rectal stump, which poses as a potential for intra-abdominal contamination. Our group has recently described a novel, NOTES assisted, clean, endoluminal rectal resection utilizing transabdominal and transanal approaches. In this paper we report the combined experience of two study groups: an open approach to the abdominal cavity and a laparoscopic approach to the peritoneal cavity. Ten female pigs were used for this research; 5 in a group using an open approach and 5 using a laparoscopic approach for the abdominal part of the procedure. During the procedure, the rectum was mobilized. An end-to-end circular stapler was used to create a recto-rectal intussusception and pull-through (IPT). The specimen was resected and extracted by making a full thickness incision through 2 bowel walls. The stapler was applied, and a recto-rectal anastomosis created. This was allowed to retract into the abdomen. Peritoneal fluid was sampled for bacteria, the pigs were sacrificed immediately after the experiment and necropsy was performed. All 10 pigs underwent an endoluminal rectal resection utilizing the trans-anal IPT technique. The proximal and distal resection margins remained approximated over the shaft of the anvil after bowel resection in all 10 subjects. A 2- to 4-mm resection margin, distal to the ligatures was accomplished consistently in all 10 subjects. No aerobic or anaerobic bacterial growth was observed in any of the peritoneal fluid samples. Our research demonstrated the feasibility of the described technique in both open and laparoscopic approaches to a clean endoluminal bowel resection and trans-anal specimen extraction without rectal stump opening. The fact that no bacterial growth was found in any of the peritoneal samples supports the initial classification of this novel technique as clean, as opposed to clean contaminated, which classifies all other techniques in use to date.

An investigation of the potential of rapid prototyping technology for image‐guided surgery

PubMed Central

Rajon, Didier A.; Bova, Frank J.; Bhasin, R. Rick; Friedman, William A.

2006-01-01

Image‐guided surgery can be broken down into two broad categories: frame‐based guidance and frameless guidance. In order to reduce both the invasive nature of stereotactic guidance and the cost in equipment and time, we have developed a new guidance technique based on rapid prototyping (RP) technology. This new system first builds a computer model of the patient anatomy and then fabricates a physical reference frame that provides a precise and unique fit to the patient anatomy. This frame incorporates a means of guiding the surgeon along a preplanned surgical trajectory. This process involves (1) obtaining a high‐resolution CT or MR scan, (2) building a computer model of the region of interest, (3) developing a surgical plan and physical guide, (4) designing a frame with a unique fit to the patient's anatomy with a physical linkage to the surgical guide, and (5) fabricating the frame using an RP unit. Software was developed to support these processes. To test the accuracy of this process, we first scanned and reproduced a plastic phantom fabricated to validate the system's ability to build an accurate virtual model. A target on the phantom was then identified, a surgical approach planned, a surgical guide designed, and the accuracy and precision of guiding a probe to that target were determined. Steps 1 through 5 were also evaluated using a head phantom. The results show that the RP technology can replicate an object from CT scans with submillimeter resolution. The fabricated reference frames, when positioned on the surface of the phantom and used to guide a surgical probe, can position the probe tip with an accuracy of 1.7 mm at the probe tip. These results demonstrate that the RP technology can be used for the fabrication of customized positioning frames for use in image‐guided surgery. PACS number: 87.57.Gg PMID:17533357

Handheld magnetic sensor for measurement of tension

NASA Astrophysics Data System (ADS)

Singal, K.; Rajamani, R.

2012-04-01

This letter develops an analytical formulation for measurement of tension in a string using a handheld sensor. By gently pushing the sensor against the string, the tension in the string can be obtained. An experimental sensor prototype is constructed to verify the analytical formulation. The centimeter-sized prototype utilizes three moving pistons and magnetic field based measurements of their positions. Experimental data show that the sensor can accurately measure tension on a bench top rig. The developed sensor could be useful in a variety of orthopedic surgical procedures, including knee replacement, hip replacement, ligament repair, shoulder stabilization, and tendon repair.

The role of virtual reality in surgical training in otorhinolaryngology.

PubMed

Fried, Marvin P; Uribe, José I; Sadoughi, Babak

2007-06-01

This article reviews the rationale, current status and future directions for the development and implementation of virtual reality surgical simulators as training tools. The complexity of modern surgical techniques, which utilize advanced technology, presents a dilemma for surgical training. Hands-on patient experience - the traditional apprenticeship method for teaching operations - may not apply because of the learning curve for skill acquisition and patient safety expectation. The paranasal sinuses and temporal bone have intricate anatomy with a significant amount of vital structures either within the surgical field or in close proximity. The current standard of surgical care in these areas involves the use of endoscopes, cameras and microscopes, requiring additional hand-eye coordination, an accurate command of fine motor skills, and a thorough knowledge of the anatomy under magnified vision. A surgeon's disorientation or loss of perspective can lead to complications, often catastrophic and occasionally lethal. These considerations define the ideal environment for surgical simulation; not surprisingly, significant research and validation of simulators in these areas have occurred. Virtual reality simulators are demonstrating validity as training and skills assessment tools. Future prototypes will find application for routine use in teaching, surgical planning and the development of new instruments and computer-assisted devices.

Miniature surgical robot for laparoendoscopic single-incision colectomy.

PubMed

Wortman, Tyler D; Meyer, Avishai; Dolghi, Oleg; Lehman, Amy C; McCormick, Ryan L; Farritor, Shane M; Oleynikov, Dmitry

2012-03-01

This study aimed to demonstrate the effectiveness of using a multifunctional miniature in vivo robotic platform to perform a single-incision colectomy. Standard laparoscopic techniques require multiple ports. A miniature robotic platform to be inserted completely into the peritoneal cavity through a single incision has been designed and built. The robot can be quickly repositioned, thus enabling multiquadrant access to the abdominal cavity. The miniature in vivo robotic platform used in this study consists of a multifunctional robot and a remote surgeon interface. The robot is composed of two arms with shoulder and elbow joints. Each forearm is equipped with specialized interchangeable end effectors (i.e., graspers and monopolar electrocautery). Five robotic colectomies were performed in a porcine model. For each procedure, the robot was completely inserted into the peritoneal cavity, and the surgeon manipulated the user interface to control the robot to perform the colectomy. The robot mobilized the colon from its lateral retroperitoneal attachments and assisted in the placement of a standard stapler to transect the sigmoid colon. This objective was completed for all five colectomies without any complications. The adoption of both laparoscopic and single-incision colectomies currently is constrained by the inadequacies of existing instruments. The described multifunctional robot provides a platform that overcomes existing limitations by operating completely within one incision in the peritoneal cavity and by improving visualization and dexterity. By repositioning the small robot to the area of the colon to be mobilized, the ability of the surgeon to perform complex surgical tasks is improved. Furthermore, the success of the robot in performing a completely in vivo colectomy suggests the feasibility of using this robotic platform to perform other complex surgeries through a single incision.

Laparoendoscopic single-site urologic surgery in children less than 5 years of age.

PubMed

Ganpule, Arvind; Sheladiya, Chetan; Mishra, Shashikant; Sabnis, Ravindra; Desai, Mahesh

2013-08-01

We report our experience with laparoendoscopic single-site (LESS) urological procedures in children less than 5 years of age. Ten patients (11 procedures) underwent LESS through the umbilicus. Seven patients underwent nephrectomy and three patients underwent pyeloplasty (one simultaneous bilateral). R-port port (Advanced Surgical Concepts, Ireland) was used in nine cases, in one case, the Gelpoint access port (Applied Medical, Rancho Santa Margarita, CA, USA) was used. The Olympus Endoeye camera with coaxial light cable was used. The hilum was secured in all cases with Hem-o-Lok clips (Teleflex Medical, Research Triangle Park, NC, USA) except in one case in which an Endo GIA stapler (Covidien Surgical, Norwalk, CT, USA) was used. All procedures were technically successful. Accessory port (3 mm) was used in 3 patients. Mean age in nephrectomized patients was 3.14±1.7 years, the mean operative room time (ORT) was 97.5±12.54 minutes. In the pyeloplasty group, mean ORT was 192±47.16 minutes and mean age was 2.43±2.3 years. Bilateral pyeloplasty was done in a 4-month-old infant. The ORT in this case was 180 minutes. A follow-up renogram done in the pyeloplasty patients (n=2) showed good drainage. Mean length of stay was 3.6 days (range, 3 to 6 days).The analgesic requirement was 23.86 mg (range, 12.5 to 50 mg) of diclofenac sodium. LESS is technically feasible in patients as young as 4 months of age. It has the potential to offer better cosmesis. This needs to be proved in further comparative studies. Development of miniature instruments will further the growth of LESS in this age group.

Presentation and surgical management of leaks after mini-gastric bypass for morbid obesity.

PubMed

Genser, Laurent; Carandina, Sergio; Tabbara, Malek; Torcivia, Adriana; Soprani, Antoine; Siksik, Jean-Michel; Cady, Jean

2016-02-01

Few data exist about the characteristics and management of enteric leaks after mini-gastric bypass (MGB). We aimed to describe the incidence, presentation, and surgical management of enteric leaks in patients who underwent laparoscopic MGB for morbid obesity. Private practice. An 8-year, 9-month retrospective chart review was performed on patients who had enteric leak requiring reoperation after MGB at a single institution. Thirty-five of 2321 patients were included. Ninety-seven percent had symptoms. Arterial hypertension and heavy smoking were predicting factors of leaks occurrence post-MGB (P<.01). Enteric leak was diagnosed by systematic upper gastrointestinal series in 4 pts (11.4%) and by computed tomography with oral water soluble contrast in 4 of 31 pts (13%). In the other 27 patients, diagnosis of the leak was made intraoperatively. Eleven patients (32%) had leak arising from the gastric stapler line (type 1), 4 (11%) from the gastrojejunal anastomosis (type 2), and 20 (57%) from undetermined origin. The most common presentation was intra-abdominal abscess in type 1 and leaks of undetermined origin and generalized peritonitis in type 2. One third of the patients who underwent reoperation developed well-drained chronic fistula into the irrigation-drainage system, with complete healing in all patients without any further procedure. The mean hospital stay was 19 days with no mortality reported. Enteric leak leading to intra-abdominal sepsis post-MGB is rare (1.5%) An operative aggressive management based on clinical symptoms is the treatment of choice allowing no postoperative leak-related mortality and complete healing. Copyright © 2016 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

High-volume intensive training course: a new paradigm for video-assisted thoracoscopic surgery education.

PubMed

Sihoe, Alan D L; Gonzalez-Rivas, Diego; Yang, Timothy Y; Zhu, Yuming; Jiang, Gening

2018-03-27

The emergence of ultra-high-volume centres promises new opportunities for thoracic surgical training. The goal of this study was to investigate the effectiveness of a novel observership course in teaching video-assisted thoracoscopic surgery (VATS) at an ultra-high-volume centre. Two-week courses in VATS at a specialist unit now performing >10 000 major lung resections annually (>50 daily on average) were attended by 230 surgeons from around the world from 2013 to 2016. An online survey preserving responder anonymity was completed by 156 attendees (67.8%). Attendees included 37% from Western Europe, 18% from Eastern Europe and 17% from Latin America. Experience with open thoracic surgery for more than 5 years was reported by 67%, but 79% had less than 5 years of VATS lobectomy experience. During the course, 70% observed over 30 uniportal VATS operations (including 38% observing over 50), and 69% attended an animal wet lab. Although 72% of the responders attended the course less than 12 months ago, the number of ports used (P < 0.001), operation times (P < 0.001) and conversion rates (P < 0.001) reported by the responders were reduced significantly after the course. Improvements in the problem areas of tissue retraction, instrumentation, stapler application and coordination with the assistant during VATS were reported by 56%, 57%, 58% and 53%, respectively. Of those who had attended other VATS courses previously, 87% preferred the training from this high-volume course. High-volume intensive observership training at an ultra-high-volume centre may improve VATS proficiency in a short period of time, and may provide a time-efficient modality for future thoracic surgical training.

Single-port thoracoscopic surgery for pneumothorax under two-lung ventilation with carbon dioxide insufflation

PubMed Central

Han, Kook Nam; Lee, Hyun Joo; Lee, Dong Kyu; Kim, Heezoo; Lim, Sang Ho; Choi, Young Ho

2016-01-01

Background The development of single-port thoracoscopic surgery and two-lung ventilation reduced the invasiveness of minor thoracic surgery. This study aimed to evaluate the feasibility and safety of single-port thoracoscopic bleb resection for primary spontaneous pneumothorax using two-lung ventilation with carbon dioxide insufflation. Methods Between February 2009 and May 2014, 130 patients underwent single-port thoracoscopic bleb resection under two-lung ventilation with carbon dioxide insufflation. Access was gained using a commercial multiple-access single port through a 2.5-cm incision; carbon dioxide gas was insufflated through a port channel. A 5-mm thoracoscope, articulating endoscopic devices, and flexible endoscopic staplers were introduced through a multiple-access single port for bulla resection. Results The mean time from endotracheal intubation to incision was 29.2±7.8 minutes, the mean operative time was 30.9±8.2 minutes, and the mean total anesthetic time was 75.5±14.4 minutes. There were no anesthesia-related complications or wound problems. The chest drain was removed after a mean of 3.7±1.4 days and patients were discharged without complications 4.8±1.5 days from the operative day. During a mean 7.5±10.1 months of follow-up, there were five recurrences (3.8%) in operated thorax. Conclusions The anesthetic strategy of single-lumen intubation with carbon dioxide gas insufflation can be a safe and feasible option for single-port thoracoscopic bulla resection as it represents the least invasive surgical option with the potential advantages of reducing operative time and one-lung ventilation-related complications without diminishing surgical outcomes. PMID:27293823

Basic Media in Education.

ERIC Educational Resources Information Center

Harrell, John

Intended as a guide to the use of different media for use in the classroom, this document demonstrates alternative approaches that may be taken to depicting and communicating images and concepts to others. Some basic tools and materials--including a ruler, matte knife, rubber cement, stapler, felt-tip pens, paint brushes, and lettering pens--are…

Multiple Learning Strategies Project. Graphics. EMI.

ERIC Educational Resources Information Center

Steinberg, Alan; And Others

This instructional package, designed for educable mentally impaired students, focuses on the vocational area of graphics. Contained in this document are nine learning modules organized into a finishing and bindery unit. Maintenance of a Challenge power cutter, operation of a hand electric stapler, and packaging with kraft paper are examples of…

[Complications after procedure for prolapse and hemorrhoids for circular hemorrhoids].

PubMed

Zhu, Jun; Ding, Jian-hua; Zhao, Ke; Zhang, Bin; Zhao, Yong; Tang, Hai-yan; Zhao, Yu-juan

2012-12-01

To investigate the perioperative and postoperative long-term complications of procedure for prolapse and hemorrhoids(PPH) for the treatment of circular internal hemorrhoids and circular mixed hemorrhoids. A retrospective study was performed in 2152 patients with circular internal hemorrhoids and circular mixed hemorrhoids eligible for PPH from January 2002 to December 2011. The perioperative and postoperative long-term complications were recorded and assessed. The median length of follow-up was 73 months. Perioperative complications and adverse events were reported including acute urinary retention(n=360, 16.7%) which was managed by temporary cathether indwelling, anastomotic bleeding(n=45, 2.1%) managed by surgical or endoscopic procedures, chronic anoperineal sustained pain(n=30, 1.4%) managed by local treatment or stapler removal, and thrombosed external hemorrhoid(n=28, 1.2%) managed by conservative treatment or resection. Long-term postoperative complications were reported including mild fecal incontinence(n=112, 6.3%), postoperative recurrence(n=82, 4.6%), anal distention and defecatory urgency(n=50, 2.8%), anastomotic stenosis(n=4, 0.2%). Postoperative recurrence developed in 82 patients(4.6%), 28 of whom were managed by repeat PPH and 54 by conservative treatment. PPH appears to be a safe technique for patients with circular internal hemorrhoids and circular mixed hemorrhoids.

[Pulmonary resection using video-assisted thoracoscopic surgery--20 years experience].

PubMed

Baste, J-M; Orsini, B; Rinieri, P; Melki, J; Peillon, C

2014-04-01

Major lung resection using minimally invasive techniques - video-assisted thoracoscopic surgery (VATS) - was first described 20 years ago. However, its development has been slow in many countries because the value of this approach has been questioned. Different techniques and definitions of VATS are used and this can be confusing for physicians and surgeons. The benefit of minimally invasive thoracic surgery was not always apparent, while many surgeons pointed to suboptimal operative outcomes. Recently, technological advances (radiology, full HD monitor and new stapler devices) have improved VATS outcomes. The objectives of this review are to emphasize the accepted definition of VATS resection, outline the different techniques developed and their results including morbidity and mortality compared to conventional approaches. Minimally invasive thoracic surgery has not been proven to give superior survival (level one evidence) compared to thoracotomy. A slight advantage has been demonstrated for short-term outcomes. VATS is not a surgical revolution but rather an evolution of surgery. It should be considered together with the new medical environment including stereotactic radiotherapy and radiofrequency. VATS seems to be more accurate in the treatment of small lung lesions diagnosed with screening CT scan. In the academic field, VATS allows easier teaching and diffusion of techniques. Copyright © 2014 SPLF. Published by Elsevier Masson SAS. All rights reserved.

Long-term Evaluation of a Modified Double Staple Technique for Low Anterior Resection.

PubMed

Illuminati, G; Carboni, F; Ceccanei, G; Pacilè, M A; Pizzardi, G; Palumbo, P; Vietri, F

2014-01-01

When performing low anterior resection for rectal cancer with the double staple technique, -closing the rectum with a linear stapler in the abdomen can be challenging, especially when dealing with a narrow pelvis. For such instances we proposed to modify this technique by pulling the rectal stump through the anus, doing an extra-anal resection of the tumor and linear suture of the rectal stump, before performing a standard, stapled colorectal anastomosis. The purpose of this study was to assess the adequacy of this modification of the double staple technique. Retrospective review of 108 patients undergoing a stapled, low colorectal or coloanal anastomosis, after -eversion, extra-anal resection of the tumor and linear closure of the rectal stump for colorectal cancer, from January 1990 to December 2012. Operative mortality was 0.9%. Fourteen patients (13%) presented early, surgery-related complications -consisting of 7 anastomotic leaks, 5 wound infections, 1 ureteral lesion, and 1 peristomal abscess. Late complications related to surgery included 5 incisional hernias (4.6%), 4 anastomotic strictures (3.7%), 4 neurogenic bladders (3.7%) and 2 fecal incontinences (1.8%). The incidence of local disease recurrence was 10%. Surgical and oncological results validate the proposed modification of the double staple technique, when facing difficulties in suturing the rectum from the abdomen. Copyright© Acta Chirurgica Belgica.

[Low anterior resection of the rectum with total mesorectal excision--immediate results].

PubMed

Radu, I; Anitei, Gabriela; Scripcariu, V; Dragomir, Cr

2011-01-01

this study was aimed at analyzing the immediate postoperative course in rectal cancer patients who underwent a low anterior resection of the rectum with total mesorectal excision. A retrospective study was carried out on a series of 75 patients operated between January 1, 2004 and December, 31 2010 at the 1lrd Surgical Unit of the Iasi "St. Spiridon" Hospital,. Low anterior resection of the rectum with total mesorectal excision was performed in all the patients. Data from medical files regarding the immediate postoperative course were analyzed. Neoadjuvant therapy was instituted in 32 patients. There were 28 mechanical colorectal anastomoses and 47 manual anastomoses. Protective ileostomy was performed in 46 cases, including I manual anastomosis and 35 mechanical anastomosis cases. Anastomotic fistulas occured in II patients (6 with manual suture and 5 with stapler). Wound complications were identified in 5 cases, while retraction of ileostomy in 2. Two patients died from anastomotic fistula causing abdominal sepsis and multiple organ failure. In both cases ileostomy was performed at the reintervention, concomitantly with drainage of the abdominal abscesses. Healing of the colorectal anastomosis remains the major problem with low anterior resection of the rectum. Protective ileostomy reduces the risk of serious complications in the event of anastomotic fistula.

In vivo porcine training model for laparoscopic Roux-en-Y choledochojejunostomy.

PubMed

Lee, Jun Suh; Hong, Tae Ho

2015-06-01

The purpose of this study was to develop a porcine training model for laparoscopic choledochojejunostomy (CJ) that can act as a bridge between simulation models and actual surgery for novice surgeons. The feasibility of this model was evaluated. Laparoscopic CJ using intracorporeal sutures was performed on ten animals by a surgical fellow with no experience in human laparoscopic CJ. A single layer of running sutures was placed in the posterior and anterior layers. Jejunojejunostomy was performed using a linear stapler, and the jejunal opening was closed using absorbable unidirectional sutures (V-Loc 180). The average operation time was 131.3 ± 36.4 minutes, and the CJ time was 57.5 ± 18.4 minutes. Both the operation time and CJ time showed a steady decrease with an increasing number of cases. The average diameter of the CBD was 6.4 ± 0.8 mm. Of a total of ten animals, eight were sacrificed after the procedure. In two animals, a survival model was evaluated. Both pigs recovered completely and survived for two weeks, after which both animals were sacrificed. None of the animals exhibited any signs of bile leakage or anastomosis site stricture. The porcine training model introduced in this paper is an adequate model for practicing laparoscopic CJ. Human tissue simulation is excellent.

Well differentiated "lipoma-like" liposarcoma of the sigmoid mesocolon and multiple lipomatosis of the rectosigmoid colon. Report of a case.

PubMed

Amato, G; Martella, A; Ferraraccio, F; Di Martino, N; Maffettone, V; Landolfi, V; Fei, L; Del Genio, A

1998-01-01

Liposarcoma is the second most common soft tissue sarcoma in adults. These neoplasms take their origin from primitive mesenchymal cells and are rarely encountered in fat rich areas, such as subcutaneous tissue and/or the subserosa of the intestinal tract which, on the contrary, are the two most common sites of lipomas. The two major locations of liposarcomas are the extremities and the retroperitoneum followed with much less frequency by the inguinal region. Other sites are uncommon, particularly the mesentery (9 cases to date in the literature) and, even more so, the mesocolon (only 3 cases of primary sarcoma of the mesocolon reported to date). This paper reports on the case of a well differentiated "lipoma-like" liposarcoma of the sigmoid mesocolon, associated with multiple lipomatosis of the recto-sigmoid colon in a 75 year-old female patient. Surgical treatment consisted of a trans-anal extra-peritoneal anterior resection by CEEA 28 stapler under endoscopic vision. The patient has been followed up for the last 2 years and is still disease-free and well. The peculiarity of the case consists in the contemporaneous presence in close contiguity of two different rare neoplasms whose association is not yet known.

Optimal Roux-en-Y reconstruction after distal gastrectomy for early gastric cancer as assessed using the newly developed PGSAS-45 scale.

PubMed

Kawahira, Hiroshi; Kodera, Yasuhiro; Hiki, Naoki; Takahashi, Masazumi; Itoh, Seiji; Mitsumori, Norio; Kawashima, Yoshiyuki; Namikawa, Tsutomu; Inada, Takao; Nakada, Koji

2015-10-01

The optimal surgical procedure for distal gastrectomy with Roux-en-Y reconstruction (DGRY) remains to be determined. Recently, a self-report assessment instrument, the Postgastrectomy Syndrome Assessment Scale-45 (PGSAS-45), was compiled to evaluate symptoms, the living status and the quality of life of patients who have undergone gastrectomy. We used this scale to evaluate procedures used for DGRY. The subjects included 475 patients who underwent DGRY for stage IA/IB gastric cancer. We evaluated whether the size of the remnant stomach, length of the Roux limb, reconstruction route and anastomotic procedure affected the patients' symptoms, living status and quality of life assessed using the PGSAS-45. Patients with a residual stomach of more than half had significantly worse esophageal reflux scores than the patients with a smaller residual stomach (P = 0.0462); a residual stomach of one-third or one-fourth was favorable. A shorter length of the Roux limb was shown to be preferable to a longer Roux limb based on the results of the PGSAS-45. In addition, antecolic reconstruction and the anastomotic procedure using a linear stapler were found to be more favorable. The size of the remnant stomach and the length and route of the Roux limb significantly influence the patient-reported DGRY outcomes.

Simulation of the Fissureless Technique for Thoracoscopic Segmentectomy Using Rapid Prototyping

PubMed Central

Nakada, Takeo; Inagaki, Takuya

2014-01-01

The fissureless lobectomy or anterior fissureless technique is a novel surgical technique, which avoids dissection of the lung parenchyma over the pulmonary artery during lobectomy by open thoracotomy approach or direct vision thoracoscopic surgery. This technique is indicated for fused lobes. We present two cases where thoracoscopic pulmonary segmentectomy was performed using the fissureless technique simulated by three-dimensional (3D) pulmonary models. The 3D model and rapid prototyping provided an accurate anatomical understanding of the operative field in both cases. We believe that the construction of these models is useful for thoracoscopic and other complicated surgeries of the chest. PMID:24633132

Simulation of the fissureless technique for thoracoscopic segmentectomy using rapid prototyping.

PubMed

Akiba, Tadashi; Nakada, Takeo; Inagaki, Takuya

2015-01-01

The fissureless lobectomy or anterior fissureless technique is a novel surgical technique, which avoids dissection of the lung parenchyma over the pulmonary artery during lobectomy by open thoracotomy approach or direct vision thoracoscopic surgery. This technique is indicated for fused lobes. We present two cases where thoracoscopic pulmonary segmentectomy was performed using the fissureless technique simulated by three-dimensional (3D) pulmonary models. The 3D model and rapid prototyping provided an accurate anatomical understanding of the operative field in both cases. We believe that the construction of these models is useful for thoracoscopic and other complicated surgeries of the chest.

Hydraulic Robotic Surgical Tool Changing Manipulator

PubMed Central

Pourghodrat, Abolfazl; Nelson, Carl A.; Oleynikov, Dmitry

2017-01-01

Natural orifice transluminal endoscopic surgery (NOTES) is a surgical technique to perform “scarless” abdominal operations. Robotic technology has been exploited to improve NOTES and circumvent its limitations. Lack of a multitasking platform is a major limitation. Manual tool exchange can be time consuming and may lead to complications such as bleeding. Previous multifunctional manipulator designs use electric motors. These designs are bulky, slow, and expensive. This paper presents design, prototyping, and testing of a hydraulic robotic tool changing manipulator. The manipulator is small, fast, low-cost, and capable of carrying four different types of laparoscopic instruments. PMID:28450979

Development of a Meso-Scale SMA-Based Torsion Actuator for Image-Guided Procedures.

PubMed

Sheng, Jun; Gandhi, Dheeraj; Gullapalli, Rao; Simard, J Marc; Desai, Jaydev P

2017-02-01

This paper presents the design, modeling, and control of a meso-scale torsion actuator based on shape memory alloy (SMA) for image-guided surgical procedures. Developing a miniature torsion actuator is challenging, but it opens the possibility of significantly enhancing the robot agility and maneuverability. The proposed torsion actuator is bi-directionally actuated by a pair of antagonistic SMA torsion springs through alternate Joule heating and natural cooling. The torsion actuator is integrated into a surgical robot prototype to demonstrate its working performance in the humid environment under C-Arm CT image guidance.

Development of a Meso-Scale SMA-Based Torsion Actuator for Image-Guided Procedures

PubMed Central

Sheng, Jun; Gandhi, Dheeraj; Gullapalli, Rao; Simard, J. Marc; Desai, Jaydev P.

2016-01-01

This paper presents the design, modeling, and control of a meso-scale torsion actuator based on shape memory alloy (SMA) for image-guided surgical procedures. Developing a miniature torsion actuator is challenging, but it opens the possibility of significantly enhancing the robot agility and maneuverability. The proposed torsion actuator is bi-directionally actuated by a pair of antagonistic SMA torsion springs through alternate Joule heating and natural cooling. The torsion actuator is integrated into a surgical robot prototype to demonstrate its working performance in the humid environment under C-Arm CT image guidance. PMID:28210189

Clinical application of stereolithographic surgical guide with a handpiece guidance apparatus: a case report.

PubMed

Ozan, Oguz; Seker, Emre; Kurtulmus-Yilmaz, Sevcan; Ersoy, Ahmet Ersan

2012-10-01

The success of implant-supported restorations depends on the treatment planning and the transfer of planning through the surgical field. Recently, new computer-aided design and manufacturing (CAD/CAM) techniques, such as stereolithographic (SLA) rapid prototyping, have been developed to fabricate surgical guides to improve the precision of implant placement. The objective of the present case is to introduce a recently developed SLA surgical guide system into the rehabilitation of a 62-year-old male patient with mandibular edentulism. After obtaining a cone-beam computerized tomography (CBCT) scan of the mandible with a radiographic template, the images were transferred into a 3-dimensional (3D) image-based software for implant planning. The StentCad Beyond SLA surgical guide system, which is a combination of a currently used surgical template with pilot hollows and a surgical handpiece guidance apparatus, was designed to transfer a preoperatively defined implant position onto the surgical site without any drill-surgical guide contact. For the fabrication of this system, a surgical handpiece was scanned by a laser optical scanner and a mucosa-supported surgical guide was designed according to the patient's 3D model, which was attained from the CBCT images. Four dental implants were inserted through the SLA surgical guide system by a torque-controlled surgical handpiece to the interforaminal region via a flapless surgical procedure. Implants were assessed 3 months after surgery, and an implant-retained mandibular overdenture was fabricated. The present case emphasizes that CAD/CAM SLA surgical guides, along with CBCT images and scanning data, may help clinicians plan and place dental implants.

Teleoperation, telerobotics, and telepresence in surgery.

PubMed

Satava, R M; Simon, I B

1993-06-01

The concepts of teleoperation, telerobotics, and telepresence are presented and defined. Current surgical systems, some in clinical practice and others in prototype demonstration, are used to illustrate each of these principles. The importance and impact of these technologies and their relation to other advanced technologies are illustrated to project a framework for the future of surgery.

Innovative procedure for computer-assisted genioplasty: three-dimensional cephalometry, rapid-prototyping model and surgical splint.

PubMed

Olszewski, R; Tranduy, K; Reychler, H

2010-07-01

The authors present a new procedure of computer-assisted genioplasty. They determined the anterior, posterior and inferior limits of the chin in relation to the skull and face with the newly developed and validated three-dimensional cephalometric planar analysis (ACRO 3D). Virtual planning of the osteotomy lines was carried out with Mimics (Materialize) software. The authors built a three-dimensional rapid-prototyping multi-position model of the chin area from a medical low-dose CT scan. The transfer of virtual information to the operating room consisted of two elements. First, the titanium plates on the 3D RP model were pre-bent. Second, a surgical guide for the transfer of the osteotomy lines and the positions of the screws to the operating room was manufactured. The authors present the first case of the use of this model on a patient. The postoperative results are promising, and the technique is fast and easy-to-use. More patients are needed for a definitive clinical validation of this procedure. Copyright 2010 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Assessment of the use of disposable skin staplers in bowel anastomoses to reduce laparotomy time in penetrating ballistic injury to the abdomen.

PubMed Central

Howell, G. P.; Ryan, J. M.; Morgans, B. T.; Cooper, G. J.

1991-01-01

Laparotomy and anastomosis of the small bowel after penetrating injury to the abdomen is a lengthy procedure. This paper describes the use of skin staplers for bowel anastomosis and presents the results of a short series of experiments upon dead pigs to compare the staple technique with conventional handsewn anastomosis. The time taken to perform each small bowel anastomosis, the integrity of the anastomosis and the skill required were assessed. The staple technique was considerably faster (mean construction time: 5.4 min, range 4-6 min) than the handsewn technique (mean construction time: 12 min, range 10-14 min), at least halving the anastomosis time (Kolmogorov two-sample test P = 0.05). In addition, the stapled anastomosis had a higher intraluminal failure pressure (mean failure pressure: 65 cmH2O, 6.37 kPa, range 30-70 cmH2O) than the handsewn anastomosis (mean failure pressure: 38.6 cmH2O, 3.78 kPa, range 10-70 cmH2O). Images Figure 1 Figure 2 Figure 3 Figure 4 PMID:2018326

[Comparative analysis of mechanical and manual cervical esophagogastric anastomosis following esophagectomy for esophageal cancer].

PubMed

Cayi, Ruijun; Li, Mei; Xiong, Gang; Cai, Kaican; Wang, Wujun

2012-06-01

To compare the complications associated with mechanical and manual cervical esophagogastric anastomosis following esophagectomy for esophageal cancer. From September, 2004 to June, 2007, 227 patients with middle and upper thoracic esophageal cancer underwent cervical esophagogastric anastomosis after esophagectomy. The patients were randomized into two groups and cervical esophagogastric anastomosis was performed using a stapler (n=102) or manually (n=125). The incidence of postoperative complications and operative time were compared between the two groups. In manual anastomosis group, anastomotic leak and anastomotic stricture occurred in 14.4% (18/125) and 8.8.% (11/125) of the patients, significantly higher than the incidences of 2.9% (3/102) and 3.9% (4/102) in the mechanical anastomosis group (P<0.01). Manual anastomosis required a significantly longer operative time than mechanical anastomosis (52∓12 vs 25∓5 min, P<0.01). The use of circular mechanical stapler in cervical esophagogastric anastomosis is associated with a lower rate of anastomotic leak and a shorter operative time, and is easy to learn and standardize to reduce the complications of the anastomosis.

Estimating Tool–Tissue Forces Using a 3-Degree-of-Freedom Robotic Surgical Tool

PubMed Central

Zhao, Baoliang; Nelson, Carl A.

2016-01-01

Robot-assisted minimally invasive surgery (MIS) has gained popularity due to its high dexterity and reduced invasiveness to the patient; however, due to the loss of direct touch of the surgical site, surgeons may be prone to exert larger forces and cause tissue damage. To quantify tool–tissue interaction forces, researchers have tried to attach different kinds of sensors on the surgical tools. This sensor attachment generally makes the tools bulky and/or unduly expensive and may hinder the normal function of the tools; it is also unlikely that these sensors can survive harsh sterilization processes. This paper investigates an alternative method by estimating tool–tissue interaction forces using driving motors' current, and validates this sensorless force estimation method on a 3-degree-of-freedom (DOF) robotic surgical grasper prototype. The results show that the performance of this method is acceptable with regard to latency and accuracy. With this tool–tissue interaction force estimation method, it is possible to implement force feedback on existing robotic surgical systems without any sensors. This may allow a haptic surgical robot which is compatible with existing sterilization methods and surgical procedures, so that the surgeon can obtain tool–tissue interaction forces in real time, thereby increasing surgical efficiency and safety. PMID:27303591

Estimating Tool-Tissue Forces Using a 3-Degree-of-Freedom Robotic Surgical Tool.

PubMed

Zhao, Baoliang; Nelson, Carl A

2016-10-01

Robot-assisted minimally invasive surgery (MIS) has gained popularity due to its high dexterity and reduced invasiveness to the patient; however, due to the loss of direct touch of the surgical site, surgeons may be prone to exert larger forces and cause tissue damage. To quantify tool-tissue interaction forces, researchers have tried to attach different kinds of sensors on the surgical tools. This sensor attachment generally makes the tools bulky and/or unduly expensive and may hinder the normal function of the tools; it is also unlikely that these sensors can survive harsh sterilization processes. This paper investigates an alternative method by estimating tool-tissue interaction forces using driving motors' current, and validates this sensorless force estimation method on a 3-degree-of-freedom (DOF) robotic surgical grasper prototype. The results show that the performance of this method is acceptable with regard to latency and accuracy. With this tool-tissue interaction force estimation method, it is possible to implement force feedback on existing robotic surgical systems without any sensors. This may allow a haptic surgical robot which is compatible with existing sterilization methods and surgical procedures, so that the surgeon can obtain tool-tissue interaction forces in real time, thereby increasing surgical efficiency and safety.

Usefulness of temporal bone prototype for drilling training: A prospective study.

PubMed

Aussedat, C; Venail, F; Nguyen, Y; Lescanne, E; Marx, M; Bakhos, D

2017-12-01

Dissection of cadaveric temporal bones (TBs) is considered the gold standard for surgical training in otology. For many reasons, access to the anatomical laboratory and cadaveric TBs is difficult for some facilities. The aim of this prospective and comparative study was to evaluate the usefulness of a physical TB prototype for drilling training in residency. Prospective study. Tertiary referral centre. Thirty-four residents were included. Seventeen residents (mean age 26.7±1.6) drilled on only cadaveric TBs ("traditional" group), in the traditional training method, while seventeen residents (mean age 26.5±1.7) drilled first on a prototype and then on a cadaveric TB ("prototype" group). Drilling performance was assessed using a validated scale. Residents completed a mastoid image before and after each drilling to enable evaluation of mental representations of the mastoidectomy. No differences were observed between the groups with respect to age, drilling experience and level of residency. Regarding drilling performance, we found a significant difference across the groups, with a better score in the prototype group (P=.0007). For mental representation, the score was statistically improved (P=.0003) after drilling in both groups, suggesting that TB drilling improves the mental representation of the mastoidectomy whether prototype or cadaveric TB is used. The TB prototype improves the drilling performance and mental representation of the mastoidectomy in the young resident population. A drilling simulation with virtual or physical systems seems to be a beneficial tool to improve TB drilling. © 2017 John Wiley & Sons Ltd.

A prototype system to support evidence-based practice.

PubMed

Demner-Fushman, Dina; Seckman, Charlotte; Fisher, Cheryl; Hauser, Susan E; Clayton, Jennifer; Thoma, George R

2008-11-06

Translating evidence into clinical practice is a complex process that depends on the availability of evidence, the environment into which the research evidence is translated, and the system that facilitates the translation. This paper presents InfoBot, a system designed for automatic delivery of patient-specific information from evidence-based resources. A prototype system has been implemented to support development of individualized patient care plans. The prototype explores possibilities to automatically extract patients problems from the interdisciplinary team notes and query evidence-based resources using the extracted terms. Using 4,335 de-identified interdisciplinary team notes for 525 patients, the system automatically extracted biomedical terminology from 4,219 notes and linked resources to 260 patient records. Sixty of those records (15 each for Pediatrics, Oncology & Hematology, Medical & Surgical, and Behavioral Health units) have been selected for an ongoing evaluation of the quality of automatically proactively delivered evidence and its usefulness in development of care plans.

A Prototype System to Support Evidence-based Practice

PubMed Central

Demner-Fushman, Dina; Seckman, Charlotte; Fisher, Cheryl; Hauser, Susan E.; Clayton, Jennifer; Thoma, George R.

2008-01-01

Translating evidence into clinical practice is a complex process that depends on the availability of evidence, the environment into which the research evidence is translated, and the system that facilitates the translation. This paper presents InfoBot, a system designed for automatic delivery of patient-specific information from evidence-based resources. A prototype system has been implemented to support development of individualized patient care plans. The prototype explores possibilities to automatically extract patients’ problems from the interdisciplinary team notes and query evidence-based resources using the extracted terms. Using 4,335 de-identified interdisciplinary team notes for 525 patients, the system automatically extracted biomedical terminology from 4,219 notes and linked resources to 260 patient records. Sixty of those records (15 each for Pediatrics, Oncology & Hematology, Medical & Surgical, and Behavioral Health units) have been selected for an ongoing evaluation of the quality of automatically proactively delivered evidence and its usefulness in development of care plans. PMID:18998835

System for the Management of Trauma and Emergency Surgery in Space

NASA Technical Reports Server (NTRS)

Houtchens, B.

1984-01-01

The need to develop a systems approach to the management of trauma and other major clinical medical events in space along with appropriate development and evaluation of surgical techniques and required hardware was investigated. A prototype zero gravity surgical module was constructed and tested aboard a KC-135 aircraft during parabolic arc zero G flight. To insure parity of quality care to that available on Earth, it was recommended that a clinical medical and bioengineering advisory committee define and help develop the necessary components of the clinical medical care system for the space station and lunar base. Key components of the system are aerospace surgical training, medical equipment development, including support hardware and software, rapid access to a network of specialty expertise, and continued research and development.

3D Rapid Prototyping for Otolaryngology-Head and Neck Surgery: Applications in Image-Guidance, Surgical Simulation and Patient-Specific Modeling.

PubMed

Chan, Harley H L; Siewerdsen, Jeffrey H; Vescan, Allan; Daly, Michael J; Prisman, Eitan; Irish, Jonathan C

2015-01-01

The aim of this study was to demonstrate the role of advanced fabrication technology across a broad spectrum of head and neck surgical procedures, including applications in endoscopic sinus surgery, skull base surgery, and maxillofacial reconstruction. The initial case studies demonstrated three applications of rapid prototyping technology are in head and neck surgery: i) a mono-material paranasal sinus phantom for endoscopy training ii) a multi-material skull base simulator and iii) 3D patient-specific mandible templates. Digital processing of these phantoms is based on real patient or cadaveric 3D images such as CT or MRI data. Three endoscopic sinus surgeons examined the realism of the endoscopist training phantom. One experienced endoscopic skull base surgeon conducted advanced sinus procedures on the high-fidelity multi-material skull base simulator. Ten patients participated in a prospective clinical study examining patient-specific modeling for mandibular reconstructive surgery. Qualitative feedback to assess the realism of the endoscopy training phantom and high-fidelity multi-material phantom was acquired. Conformance comparisons using assessments from the blinded reconstructive surgeons measured the geometric performance between intra-operative and pre-operative reconstruction mandible plates. Both the endoscopy training phantom and the high-fidelity multi-material phantom received positive feedback on the realistic structure of the phantom models. Results suggested further improvement on the soft tissue structure of the phantom models is necessary. In the patient-specific mandible template study, the pre-operative plates were judged by two blinded surgeons as providing optimal conformance in 7 out of 10 cases. No statistical differences were found in plate fabrication time and conformance, with pre-operative plating providing the advantage of reducing time spent in the operation room. The applicability of common model design and fabrication techniques across a variety of otolaryngological sub-specialties suggests an emerging role for rapid prototyping technology in surgical education, procedure simulation, and clinical practice.

3D Rapid Prototyping for Otolaryngology—Head and Neck Surgery: Applications in Image-Guidance, Surgical Simulation and Patient-Specific Modeling

PubMed Central

Chan, Harley H. L.; Siewerdsen, Jeffrey H.; Vescan, Allan; Daly, Michael J.; Prisman, Eitan; Irish, Jonathan C.

2015-01-01

The aim of this study was to demonstrate the role of advanced fabrication technology across a broad spectrum of head and neck surgical procedures, including applications in endoscopic sinus surgery, skull base surgery, and maxillofacial reconstruction. The initial case studies demonstrated three applications of rapid prototyping technology are in head and neck surgery: i) a mono-material paranasal sinus phantom for endoscopy training ii) a multi-material skull base simulator and iii) 3D patient-specific mandible templates. Digital processing of these phantoms is based on real patient or cadaveric 3D images such as CT or MRI data. Three endoscopic sinus surgeons examined the realism of the endoscopist training phantom. One experienced endoscopic skull base surgeon conducted advanced sinus procedures on the high-fidelity multi-material skull base simulator. Ten patients participated in a prospective clinical study examining patient-specific modeling for mandibular reconstructive surgery. Qualitative feedback to assess the realism of the endoscopy training phantom and high-fidelity multi-material phantom was acquired. Conformance comparisons using assessments from the blinded reconstructive surgeons measured the geometric performance between intra-operative and pre-operative reconstruction mandible plates. Both the endoscopy training phantom and the high-fidelity multi-material phantom received positive feedback on the realistic structure of the phantom models. Results suggested further improvement on the soft tissue structure of the phantom models is necessary. In the patient-specific mandible template study, the pre-operative plates were judged by two blinded surgeons as providing optimal conformance in 7 out of 10 cases. No statistical differences were found in plate fabrication time and conformance, with pre-operative plating providing the advantage of reducing time spent in the operation room. The applicability of common model design and fabrication techniques across a variety of otolaryngological sub-specialties suggests an emerging role for rapid prototyping technology in surgical education, procedure simulation, and clinical practice. PMID:26331717

The C-seal trial: colorectal anastomosis protected by a biodegradable drain fixed to the anastomosis by a circular stapler, a multi-center randomized controlled trial

PubMed Central

2012-01-01

Background Anastomotic leakage is a major complication in colorectal surgery and with an incidence of 11% the most common cause of morbidity and mortality. In order to reduce the incidence of anastomotic leakage the C-seal is developed. This intraluminal biodegradable drain is stapled to the anastomosis with a circular stapler and prevents extravasation of intracolonic content in case of an anastomotic dehiscence. The aim of this study is to evaluate the efficacy of the C-seal in reducing anastomotic leakage in stapled colorectal anastomoses, as assessed by anastomotic leakage leading to invasive treatment within 30 days postoperative. Methods The C-seal trial is a prospective multi-center randomized controlled trial with primary endpoint, anastomotic leakage leading to re-intervention within 30 days after operation. In this trial 616 patients will be randomized to the C-seal or control group (1:1), stratified by center, anastomotic height (proximal or distal of peritoneal reflection) and the intention to create a temporary deviating ostomy. Interim analyses are planned after 50% and 75% of patient inclusion. Eligible patients are at least 18 years of age, have any colorectal disease requiring a colorectal anastomosis to be made with a circular stapler in an elective setting, with an ASA-classification < 4. Oral mechanical bowel preparation is mandatory and patients with signs of peritonitis are excluded. The C-seal student team will perform the randomization procedure, supports the operating surgeon during the C-seal application and achieves the monitoring of the trial. Patients are followed for one year after randomization en will be analyzed on an intention to treat basis. Discussion This Randomized Clinical trial is designed to evaluate the effectiveness of the C-seal in preventing clinical anastomotic leakage. Trial registration NTR3080 PMID:23153188

Rapid prototyping model for percutaneous nephrolithotomy training.

PubMed

Bruyère, Franck; Leroux, Cecile; Brunereau, Laurent; Lermusiaux, Patrick

2008-01-01

Rapid prototyping is a technique used for creating computer images in three dimensions more efficiently than classic techniques. Percutaneous nephrolithotomy (PCNL) is a popular method to remove kidney stones; however, broader use by the urologic community has been hampered by the morbidity associated with needle puncture to gain access to the renal calix (bleeding, pneumothorax, hydrothorax, inadvertent colon injury). A training model to improve technique and understanding of renal anatomy could improve complications related to renal puncture; however, no model currently exists for resident training. We created a training model using the rapid prototyping technique based on abdominal CT images of a patient scheduled to undergo PCNL. This allowed our staff and residents to train on the model before performing the operation. This model allowed anticipation of particular difficulties inherent to the patient's anatomy. After training, the procedure proceeded without complication, and the patient was discharged at postoperative day 1 without problems. We hypothesize that rapid prototyping could be useful for resident education, allowing the creation of numerous models for research and surgical training. In addition, we anticipate that experienced urologists could find this technique helpful in preparation for difficult PCNL operations.

Comparison of five-axis milling and rapid prototyping for implant surgical templates.

PubMed

Park, Ji-Man; Yi, Tae-Kyoung; Koak, Jai-Young; Kim, Seong-Kyoon; Park, Eun-Jin; Heo, Seong-Joo

2014-01-01

This study aims to compare and evaluate the accuracy of surgical templates fabricated using coordinate synchronization processing with five-axis milling and design-related processing with rapid prototyping (RP). Master phantoms with 10 embedded gutta-percha cylinders hidden under artificial gingiva were fabricated and imaged using cone beam computed tomography. Vectors of the hidden cylinders were extracted and transferred to those of the planned implants through reverse engineering using virtual planning software. An RP-produced template was fabricated by stereolithography in photopolymer at the RP center according to planned data. Metal sleeves were bonded after holes were bored (group RP). For the milled template, milling coordinates were synchronized using the conversion process for the coordinate synchronization platform located on the model's bottom. Metal bushings were set on holes milled on the five-axis milling machine, on which the model was fixed through the coordinate synchronization plate, and the framework was constructed on the model using orthodontic resin (group CS). A computed tomography image was taken with templates firmly fixed on models using anchor pins (RP) or anchor screws (CS). The accuracy was analyzed via reverse engineering. Differences between the two groups were compared by repeated measures two-factor analysis. From the reverse-engineered image of the template on the experimental model, RP-produced templates showed significantly larger deviations than did milled surgical guides. Maximum deviations of the group RP were 1.58 mm (horizontal), 1.68 mm (vertical), and 8.51 degrees (angular); those of the group CS were 0.68 mm (horizontal), 0.41 mm (vertical), and 3.23 degrees (angular). A comparison of milling and RP template production methods showed that a vector-milled surgical guide had significantly smaller deviations than did an RP-produced template. The accuracy of computer-guided milled surgical templates was within the safety margin of previous studies.

Application of 3D printing in the surgical planning of hypertrophic obstructive cardiomyopathy and physician-patient communication: a preliminary study.

PubMed

Guo, Hong-Chang; Wang, Yang; Dai, Jiang; Ren, Chang-Wei; Li, Jin-Hua; Lai, Yong-Qiang

2018-02-01

The aim of this study was to evaluate the effect of 3-dimensional (3D) printing in treatment of hypertrophic obstructive cardiomyopathy (HOCM) and its roles in doctor-patient communication. 3D-printed models were constructed preoperatively and postoperatively in seven HOCM patients received surgical treatment. Based on multi-slice computed tomography (CT) images, regions of disorder were segmented using the Mimics 19.0 software (Materialise, Leuven, Belgium). After generating an STL-file (StereoLithography file) with patients' data, the 3D printer (Objet350 Connex3, Stratasys Ltd., USA) created a 3D model. The pre- and post-operative 3D-printed models were used to make the surgical plan preoperatively and evaluate the outcome postoperatively. Meanwhile, a questionnaire was designed for patients and their relatives to learn the effectiveness of the 3D-printed prototypes in the preoperative conversations. The heart anatomies were accurately printed with 3D technology. The 3D-printed prototypes were useful for preoperative evaluation, surgical planning, and practice. Preoperative and postoperative echocardiographic evaluation showed left ventricular outflow tract (LVOT) obstruction was adequately relieved (82.71±31.63 to 14.91±6.89 mmHg, P<0.001), the septal thickness was reduced from 21.57±4.65 to 17.42±5.88 mm (P<0.001), and the SAM disappeared completely after the operation. Patients highly appreciated the role of 3D model in preoperative conversations and the communication score was 9.11±0.38 points. A 3D-printed model is a useful tool in individualized planning for myectomies and represent a useful tool for physician-patient communication.

A modified technique for esophagojejunostomy or esophagogastrostomy after laparoscopic gastrectomy.

PubMed

Chong-Wei, Ke; Dan-Lei, Chen; Dan, Ding

2013-06-01

Reconstruction of the digestive tract involving esophageal anastomosis after laparoscopic gastrectomy is a surgically difficult procedure. In this study, a newly developed transoral pretilted circular anvil, a "the oral to the abdomen" method, was proven to be effective. A total of 34 consecutive patients underwent esophageal anastomosis using the OrVil in our hospital from July 2009 to February 2011. The esophagus was transected and a small hole was then made in the esophageal stump through which the nasogastric tube of the OrVil was passed to insert the anvil into the abdominal cavity. After fixation with a stapler and a glove at the jejunal loop or the remnant stomach, the abdominal cavity was entered through the minilaparotomy. Pneumoperitoneum and airtightness were reestablished after the glove edge was turned over to seal off the protector. Eventually, intracorporeal esophagojejunostomy or esophagogastrostomy was accomplished under the guidance of laparoscopy. There were 34 patients in the study: 1 with Zollinger-Ellison syndrome, 7 with stromal tumors in cardia, 23 with adenocarcinoma in the stomach, and 3 with cardia adenocarcinoma involving the lower esophagus. The surgical margins for all tumor patients were negative for tumor cells. The mean operative time was 175.0 minutes (90 to 240 min) and the mean intraoperative blood loss was 195.6 mL (50 to 800 mL). The 34 patients underwent successful laparoscopic surgeries with no open conversions. For 32 patients, there were no technological complications in the transoral insertion of the anvil to the esophageal stump. There were no anastomotic leaks after the surgery. The use of the OrVil device, a "the oral to the abdomen" method, changes the direction of the anvil insertion and significantly decreases both difficulty and duration of the laparoscopic surgery. More importantly, if the mass is at a higher position, this approach can achieve a higher surgical margin compared with the hand-sewn purse-string suture technique, thus avoiding the need to undergo a thoracotomy (Supplemental Digital Content 1, http://links.lww.com/SLE/A83).

Rapid Prototyping Amphiphilic Polymer/Hydroxyapatite Composite Scaffolds with Hydration-Induced Self-Fixation Behavior

PubMed Central

Kutikov, Artem B.; Gurijala, Anvesh

2015-01-01

Two major factors hampering the broad use of rapid prototyped biomaterials for tissue engineering applications are the requirement for custom-designed or expensive research-grade three-dimensional (3D) printers and the limited selection of suitable thermoplastic biomaterials exhibiting physical characteristics desired for facile surgical handling and biological properties encouraging tissue integration. Properly designed thermoplastic biodegradable amphiphilic polymers can exhibit hydration-dependent hydrophilicity changes and stiffening behavior, which may be exploited to facilitate the surgical delivery/self-fixation of the scaffold within a physiological tissue environment. Compared to conventional hydrophobic polyesters, they also present significant advantages in blending with hydrophilic osteoconductive minerals with improved interfacial adhesion for bone tissue engineering applications. Here, we demonstrated the excellent blending of biodegradable, amphiphilic poly(D,L-lactic acid)-poly(ethylene glycol)-poly(D,L-lactic acid) (PLA-PEG-PLA) (PELA) triblock co-polymer with hydroxyapatite (HA) and the fabrication of high-quality rapid prototyped 3D macroporous composite scaffolds using an unmodified consumer-grade 3D printer. The rapid prototyped HA-PELA composite scaffolds and the PELA control (without HA) swelled (66% and 44% volume increases, respectively) and stiffened (1.38-fold and 4-fold increases in compressive modulus, respectively) in water. To test the hypothesis that the hydration-induced physical changes can translate into self-fixation properties of the scaffolds within a confined defect, a straightforward in vitro pull-out test was designed to quantify the peak force required to dislodge these scaffolds from a simulated cylindrical defect at dry versus wet states. Consistent with our hypothesis, the peak fixation force measured for the PELA and HA-PELA scaffolds increased 6-fold and 15-fold upon hydration, respectively. Furthermore, we showed that the low-fouling 3D PELA inhibited the attachment of NIH3T3 fibroblasts or bone marrow stromal cells while the HA-PELA readily supported cellular attachment and osteogenic differentiation. Finally, we demonstrated the feasibility of rapid prototyping biphasic PELA/HA-PELA scaffolds for potential guided bone regeneration where an osteoconductive scaffold interior encouraging osteointegration and a nonadhesive surface discouraging fibrous tissue encapsulation is desired. This work demonstrated that by combining facile and readily translatable rapid prototyping approaches with unique biomaterial designs, biodegradable composite scaffolds with well-controlled macroporosities, spatially defined biological microenvironment, and useful handling characteristics can be developed. PMID:25025950

Wing on a String

ERIC Educational Resources Information Center

Fitzgerald, Mike; Brand, Lance

2004-01-01

In this article, the authors present an activity that shows students how flight occurs. The "wing on a string" is a simple teacher-made frame that consists of PVC pipe, fishing line, and rubber bands--all readily available hardware store items. The only other materials/tools involved are a sheet of paper, some pieces of a soda straw, a stapler,…

Technological aids in uniportal video-assisted thoracoscopic surgery.

PubMed

Roque Cañas, Sonia Raquelline; Oviedo Argueta, Alonso José; Wu, Ching Feng; Gonzalez-Rivas, Diego

2017-01-01

With the evolution of uniportal video-assisted thoracoscopic surgery (VATS), the technological aids have come to help skill surgeons to improve the results in thoracic surgery and feasible to perform a complex surgery. The technological aids are divided into three important groups, which make surgical steps easy to perform, besides reducing surgical time and surgical accidents in the hands of experienced surgeons. The groups are: (I) conventional thoracoscopic instruments; (II) sealing devices using in uniportal VATS; (III) high definition cameras, robotic arms prototype and the future robotic aids for uniportal VATS surgery. Uniportal VATS is an example of the continuing search for methods that aim to provide the patient a surgical cure of the disease with the lowest morbidity. That is the reason companies are creating more and new technologies, but the surgeon have to choose properly and to know how, when and where is the moment to use each new aids to avoid mistakes. The future of the thoracic surgery is based on evolution of surgical procedures and innovations to try to reduce even more the surgical and anesthetic trauma. This article summarizes the technological aids to improve and help a thoracoscopics surgeons perform a uniportal VATS feasible and safe.

Microsurgery robots: addressing the needs of high-precision surgical interventions.

PubMed

Mattos, Leonardo S; Caldwell, Darwin G; Peretti, Giorgio; Mora, Francesco; Guastini, Luca; Cingolani, Roberto

2016-01-01

Robotics has a significant potential to enhance the overall capacity and efficiency of healthcare systems. Robots can help surgeons perform better quality operations, leading to reductions in the hospitalisation time of patients and in the impact of surgery on their postoperative quality of life. In particular, robotics can have a significant impact on microsurgery, which presents stringent requirements for superhuman precision and control of the surgical tools. Microsurgery is, in fact, expected to gain importance in a growing range of surgical specialties as novel technologies progressively enable the detection, diagnosis and treatment of diseases at earlier stages. Within such scenarios, robotic microsurgery emerges as one of the key components of future surgical interventions, and will be a vital technology for addressing major surgical challenges. Nonetheless, several issues have yet to be overcome in terms of mechatronics, perception and surgeon-robot interfaces before microsurgical robots can achieve their full potential in operating rooms. Research in this direction is progressing quickly and microsurgery robot prototypes are gradually demonstrating significant clinical benefits in challenging applications such as reconstructive plastic surgery, ophthalmology, otology and laryngology. These are reassuring results offering confidence in a brighter future for high-precision surgical interventions.

Solid models for CT/MR image display: accuracy and utility in surgical planning

NASA Astrophysics Data System (ADS)

Mankovich, Nicholas J.; Yue, Alvin; Ammirati, Mario; Kioumehr, Farhad; Turner, Scott

1991-05-01

Medical imaging can now take wider advantage of Computer-Aided-Manufacturing through rapid prototyping technologies (RPT) such as stereolithography, laser sintering, and laminated object manufacturing to directly produce solid models of patient anatomy from processed CT and MR images. While conventional surgical planning relies on consultation with the radiologist combined with direct reading and measurement of CT and MR studies, 3-D surface and volumetric display workstations are providing a more easily interpretable view of patient anatomy. RPT can provide the surgeon with a life size model of patient anatomy constructed layer by layer with full internal detail. Although this life-size anatomic model is more easily understandable by the surgeon, its accuracy and true surgical utility remain untested. We have developed a prototype image processing and model fabrication system based on stereolithography, which provides the neurosurgeon with models of the skull base. Parallel comparison of the model with the original thresholded CT data and with a CRT displayed surface rendering showed that both have an accuracy of 99.6 percent. Because of the ease of exact voxel localization on the model, its precision was high with the standard deviation of measurement of 0.71 percent. The measurements on the surface rendered display proved more difficult to exactly locate and yielded a standard deviation of 2.37 percent. This paper presents our accuracy study and discussed ways of assessing the quality of neurosurgical plans when 3-D models a made available as planning tools.

Annual Progress Report, FY 1980, 1 October 1979 - 30 September 1980,

DTIC Science & Technology

1980-10-01

coordinating an integrated pest management program, and constructing initial pilot prototypes, test models, and pro- ducing limited quantities of medical...Screening Test Based on the Ventilatory Responses of Fish . . . . . . . a & a . . . . 25 Chemistry and Molecular Biology of the Disinfection Process...Sink Unit, Surgical, Field (NSN 6545-00-935-4056), Engineering Evaluation of . . . . . . . . . . . . . . . . . . 69 Technical Feasibility Testing (TFT

Advanced Technologies in Safe and Efficient Operating Rooms

DTIC Science & Technology

2009-02-01

parameters and sitting strategies to determine car seat design that is both comfortable and ergonomically sound.8 The study of ergonomics in the surgical...off stereo into a prototype endoscope and developed design concepts for visualization techniques based on principles of cognitive ergonomics ...results from simultaneous task performance—is typical of knowledge ascertained through ergonomic clinical research.6 Ergonomic theory, design , and

Surgical planning and microvascular reconstruction of the mandible with a fibular flap using computer-aided design, rapid prototype modelling, and precontoured titanium reconstruction plates: a prospective study.

PubMed

Sieira Gil, R; Roig, A Marí; Obispo, C Arranz; Morla, A; Pagès, C Martí; Perez, J Llopis

2015-01-01

The standard of mandibular reconstruction has increased since the introduction of computer-assisted design (CAD) and rapid prototype modelling (RPM) for surgical planning. Between 2008 and 2013, a prospective pilot study of 20 patients was planned to compare the outcomes of patients treated by mandibular reconstruction who had CAD and RPM-guided operations using a precontoured titanium plate, with the outcomes of patients treated conventionally. We recorded the time taken for reconstruction, total operating time, and whether this type of planning could improve the results of mandibular reconstruction. We found significant differences in the incidence of dental malocclusion (p=0.03) and exposure of the titanium plate (p=0.009). The mean operating time for reconstruction in the preoperative planning group was 135 (37)min compared with 176 (58)min in the conventional group (p=0.04). Preoperative planning using CAD and RPM can increase the accuracy of microvascular mandibular reconstruction and reduce the operating time for reconstruction. Copyright © 2014 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Skin closure using staples and nylon sutures: a comparison of results.

PubMed

Stockley, I; Elson, R A

1987-03-01

A disposable skin stapler (Elite: Auto Suture UK Ltd) and Nylon vertical mattress sutures have been used for skin closure. The complications related to each method were evaluated in 129 wounds. There was a higher incidence of inflammation, discomfort on removal and spreading of the healing scar associated with staples. The only advantage of staples was speed of wound closure.

An Electronic Indicator for Angular Velocity and Acceleration

DTIC Science & Technology

1944-08-01

n’cl | hce (f -l) r>iitlil rl Id, ~3/.ui., , JO. f NACÄ •ft! to AUG8 1947 WASHINGTON riACA WART1MK REPORTS are reprints of papere -r’./inally...ar top suggested tijo aeed for a stapler ml quicker method of obtaining data fron the machine than that provided by the manufacturer, tu the four

Zenker’s diverticulum: flexible versus rigid repair

PubMed Central

Beard, Kristen

2017-01-01

Zenker’s diverticula (ZDs) are a relatively common cause of cervical dysphagia. Diagnosis is best by a good upper GI exam though upper endoscopy should be performed as well. Treatment is either by open, transcervical approaches or trans-oral. Over the past 20 years, transoral approach has mostly replace transcervical approaches due to less pain, no scarring and a rapid recovery. Transoral approaches are either using rigid access or flexible endoscopy. Today, the most common approach is transoral stapling using a 12 mm laparoscopic linear cutting stapler. This has the drawbacks of requiring extreme neck extension, the massive size of the stapler making visualization mostly impossible and the current staple design that does not cut/staple all the way to the end of the blades—resulting in a residual pouch. Flexible endoscopy allows a more tailored approach under direct vision, the myotomy can even be extended beyond the diverticulum and onto the esophageal wall to minimize the risk of incomplete myotomy. Experienced endoscopists report high technical success and low complication. Success rates are similar but maybe slightly higher than with ridged transoral approaches or open surgery. Today, flexible endoscopic Zenkers is our preferred initial approach—with open or ridged being reserved for special indications. PMID:28446979

Total mechanical stapled oesophagogastric anastomosis on the neck in oesophageal cancer - prevention of postoperative mediastinal complications.

PubMed

Zieliński, Jacek; Jaworski, Radosław; Irga-Jaworska, Ninela; Haponiuk, Ireneusz; Jaśkiewicz, Janusz

2015-12-01

Oesophagogastric anastomosis after oesophagus resection is commonly performed on the neck. Even though a few different techniques of oesophagogastric anastomosis have been previously detailed, both manual and mechanical procedures have been burdened with leakages and strictures. Our simple technique of oesophagogastric anastomosis is a modification of mechanical anastomosis with the use of a circular stapler in order to prevent postoperative leak and concomitant mediastinal complications. Since 2008, we have performed nine oesophagogastric anastomoses following oesophagus resection. The mean age of the operated patients was 54 years. There was no mortality among the operated patients in the early post-operative period. The mean follow-up period for the patients operated on in our department was 17 months until the time of the analysis. None of the patients showed any leakage or stricture, and no mediastinal complications were reported in the group. Following our own experience, mechanical anastomosis with the use of a circular stapler seems to decrease the time of the operation as well as significantly reducing the incidence of leakages from the anastomosis. This type of anastomosis may decrease the number of postoperative strictures and the most dangerous mediastinal infections.

Use of the stapler in anterior resection for cancer of the rectosigmoid.

PubMed

Resnick, S D; Burstein, A E; Viner, Y L

1983-02-01

The circular stapling device was used for anterior resection in 61 of 88 patients who underwent curative surgery for rectosigmoid cancer. Use of the autosuture increased the success rate to 68.5% for this radical sphincter-saving procedure. In three-quarters of the patients the stapling end-to-end inverting colorectal anastomosis was created within 3 to 8 cm from the dentate line, where it is difficult or even impossible to perform anastamoses by the conventional manual technique. Anastomotic leakage (3.3%) and hemorrhage (4.9%), mild anastomotic stenosis (1.6%) and transitory anal incontinence (4.9%) were the main complications. There were no deaths in our series. The great safety of the stapling anastomosis and the low rate of anal incontinence may be explained by the preservation of an adequate blood supply and innervation of the rectal stump and its sphincter apparatus, as the stapling device needs only minimal mobilization of the bowel involved in the anastomosis. Restoring colorectal continuity after Hartmann's resection is a speedy, safe and simple procedure with the EEA (enteroenterostomy) stapler. Hartmann's operation may thus be considered the procedure of choice in emergency surgery for obstructed rectosigmoid cancer.

Total mechanical stapled oesophagogastric anastomosis on the neck in oesophageal cancer – prevention of postoperative mediastinal complications

PubMed Central

Jaworski, Radosław; Irga-Jaworska, Ninela; Haponiuk, Ireneusz; Jaśkiewicz, Janusz

2015-01-01

Oesophagogastric anastomosis after oesophagus resection is commonly performed on the neck. Even though a few different techniques of oesophagogastric anastomosis have been previously detailed, both manual and mechanical procedures have been burdened with leakages and strictures. Our simple technique of oesophagogastric anastomosis is a modification of mechanical anastomosis with the use of a circular stapler in order to prevent postoperative leak and concomitant mediastinal complications. Since 2008, we have performed nine oesophagogastric anastomoses following oesophagus resection. The mean age of the operated patients was 54 years. There was no mortality among the operated patients in the early post-operative period. The mean follow-up period for the patients operated on in our department was 17 months until the time of the analysis. None of the patients showed any leakage or stricture, and no mediastinal complications were reported in the group. Following our own experience, mechanical anastomosis with the use of a circular stapler seems to decrease the time of the operation as well as significantly reducing the incidence of leakages from the anastomosis. This type of anastomosis may decrease the number of postoperative strictures and the most dangerous mediastinal infections. PMID:26855647

Customized, Miniature Rapid-Prototype Stereotactic Frames for Use in Deep Brain Stimulator Surgery: Initial Clinical Methodology and Experience from 263 Patients from 2002 to 2008

PubMed Central

Konrad, Peter E.; Neimat, Joseph S.; Yu, Hong; Kao, Chris C.; Remple, Michael S.; D'Haese, Pierre-François; Dawant, Benoit M.

2011-01-01

Background The microTargeting™ platform (MTP) stereotaxy system (FHC Inc., Bowdoin, Me., USA) was FDA approved in 2001 utilizing rapid-prototyping technology to create custom platforms for human stereotaxy procedures. It has also been called the STarFix (surgical targeting fixture) system since it is based on the concept of a patient- and procedure-specific surgical fixture. This is an alternative stereotactic method by which planned trajectories are incorporated into custom-built, miniature stereotactic platforms mounted onto bone fiducial markers. Our goal is to report the clinical experience with this system over a 6-year period. Methods We present the largest reported series of patients who underwent deep brain stimulation (DBS) implantations using customized rapidly prototyped stereotactic frames (MTP). Clinical experience and technical features for the use of this stereotactic system are described. Final lead location analysis using postoperative CT was performed to measure the clinical accuracy of the stereotactic system. Results Our series included 263 patients who underwent 284 DBS implantation surgeries at one institution over a 6-year period. The clinical targeting error without accounting for brain shift in this series was found to be 1.99 mm (SD 0.9). Operating room time was reduced through earlier incision time by 2 h per case. Conclusion Customized, miniature stereotactic frames, namely STarFix platforms, are an acceptable and efficient alternative method for DBS implantation. Its clinical accuracy and outcome are comparable to those associated with traditional stereotactic frame systems. PMID:21160241

Image-guided sphenoid wing meningioma resection and simultaneous computer-assisted cranio-orbital reconstruction: technical case report.

PubMed

Westendorff, Carsten; Kaminsky, Jan; Ernemann, Ulrike; Reinert, Siegmar; Hoffmann, Jürgen

2007-02-01

Resection of large intraosseous sphenoid wing meningiomas is traditionally associated with significant morbidity. Rapid prototyping techniques have become widely used for treatment planning. Yet, the transfer of a treatment plan into the intraoperative situs strongly depends on the experience of the individual surgeon. Extensive resection with orbital decompression was planned and performed on the basis of rapid prototyping and surgical navigation techniques in a 44-year-old woman presenting with a large sphenoid wing meningioma on the right infiltrating the orbit. Tumor resection was simulated on a stereolithography model of the patient's head. The stereolithography model was scanned using computed tomography (CT) and the defect geometry was used to create a custom-made titanium implant. The implant consisted of a solid titanium core and a spot-welded titanium mesh surrounding the core, allowing for minor intraoperative adjustments of the implant size by reducing the mesh size. The stereolithography model with the incorporated implant was CT scanned again and the CT data were fused with the patient's original CT data. The implant borders indicating the resection borders were marked within the patient's CT data set. This treatment plan was transferred to an optical navigation system. Intraoperatively, tumor resection was performed using surgical navigation. In the presented case report, the combination of computer-assisted planning using rapid prototyping techniques and image-guided surgery allowed for an extensive tumor resection precisely according to a preoperative treatment plan in a patient presenting with a large intraosseous sphenoid wing meningioma. A larger clinical series with a long-term follow-up period will be needed to determine the reproducibility.

Three-Dimensional Printed Modeling of Diffuse Low-Grade Gliomas and Associated White Matter Tract Anatomy.

PubMed

Thawani, Jayesh P; Singh, Nickpreet; Pisapia, Jared M; Abdullah, Kalil G; Parker, Drew; Pukenas, Bryan A; Zager, Eric L; Verma, Ragini; Brem, Steven

2017-04-01

Diffuse low-grade gliomas (DLGGs) represent several pathological entities that infiltrate and invade cortical and subcortical structures in the brain. To describe methods for rapid prototyping of DLGGs and surgically relevant anatomy. Using high-definition imaging data and rapid prototyping technologies, we were able to generate 3 patient DLGGs to scale and represent the associated white matter tracts in 3 dimensions using advanced diffusion tensor imaging techniques. This report represents a novel application of 3-dimensional (3-D) printing in neurosurgery and a means to model individualized tumors in 3-D space with respect to subcortical white matter tract anatomy. Faculty and resident evaluations of this technology were favorable at our institution. Developing an understanding of the anatomic relationships existing within individuals is fundamental to successful neurosurgical therapy. Imaging-based rapid prototyping may improve on our ability to plan for and treat complex neuro-oncologic pathology. Copyright © 2017 by the Congress of Neurological Surgeons

An Intraoperative β- Detecting Probe for Radio-Guided Surgery in Tumour Resection

NASA Astrophysics Data System (ADS)

Russomando, Andrea; Bellini, Fabio; Bocci, Valerio; Collamati, Francesco; De Lucia, Erika; Faccini, Riccardo; Marafini, Michela; Mattei, Ilaria; Chiodi, Giacomo; Patera, Vincenzo; Recchia, Luigi; Sarti, Alessio; Sciubba, Adalberto; Camillocci, Elena Solfaroli; Paramatti, Riccardo; Voena, Cecilia; Donnarumma, Raffaella; Mancini-Terracciano, Carlo; Morganti, Silvio

2016-10-01

The development of the β- based radio-guided surgery aims to extend the technique to those tumours where surgery is the only possible treatment and the assessment of the resection would most profit from the low background around the lesion, as for brain tumours. To validate the technique, prototypes of the intraoperative β- probe have been developed. This paper discusses the design details of one of the prototypes and its tests performed in laboratory. In such tests particular care has to be taken to reproduce the surgical field conditions. The tests showed that the prototype under study has 70% efficiency on electrons with an energy threshold at 540 keV, a point-like resolution of 2.8±0.1 mm, and a sensitivity to photons lower than 1%. The tests also demonstrated, with an innovative technique to produce specific phantoms, that 0.5 ml residuals can be safely identified in 1 s with tumor-non-tumor ratio equal to 10.

Prototyping a Hybrid Cooperative and Tele-robotic Surgical System for Retinal Microsurgery.

PubMed

Balicki, Marcin; Xia, Tian; Jung, Min Yang; Deguet, Anton; Vagvolgyi, Balazs; Kazanzides, Peter; Taylor, Russell

2011-06-01

This paper presents the design of a tele-robotic microsurgical platform designed for development of cooperative and tele-operative control schemes, sensor based smart instruments, user interfaces and new surgical techniques with eye surgery as the driving application. The system is built using the distributed component-based cisst libraries and the Surgical Assistant Workstation framework. It includes a cooperatively controlled EyeRobot2, a da Vinci Master manipulator, and a remote stereo visualization system. We use constrained optimization based virtual fixture control to provide Virtual Remote-Center-of-Motion (vRCM) and haptic feedback. Such system can be used in a hybrid setup, combining local cooperative control with remote tele-operation, where an experienced surgeon can provide hand-over-hand tutoring to a novice user. In another scheme, the system can provide haptic feedback based on virtual fixtures constructed from real-time force and proximity sensor information.

Prototyping a Hybrid Cooperative and Tele-robotic Surgical System for Retinal Microsurgery

PubMed Central

Balicki, Marcin; Xia, Tian; Jung, Min Yang; Deguet, Anton; Vagvolgyi, Balazs; Kazanzides, Peter; Taylor, Russell

2013-01-01

This paper presents the design of a tele-robotic microsurgical platform designed for development of cooperative and tele-operative control schemes, sensor based smart instruments, user interfaces and new surgical techniques with eye surgery as the driving application. The system is built using the distributed component-based cisst libraries and the Surgical Assistant Workstation framework. It includes a cooperatively controlled EyeRobot2, a da Vinci Master manipulator, and a remote stereo visualization system. We use constrained optimization based virtual fixture control to provide Virtual Remote-Center-of-Motion (vRCM) and haptic feedback. Such system can be used in a hybrid setup, combining local cooperative control with remote tele-operation, where an experienced surgeon can provide hand-over-hand tutoring to a novice user. In another scheme, the system can provide haptic feedback based on virtual fixtures constructed from real-time force and proximity sensor information. PMID:24398557

Deployment and testing of a second prototype expandable surgical chamber in microgravity

NASA Technical Reports Server (NTRS)

Markham, Sanford M.; Rock, John A.

1991-01-01

During microgravity exposure, two separate expandable surgical chambers were tested. Both chambers had been modified to fit the microgravity work station without extending over the sides of the table. Both chambers were attached to a portable laminar flow generator which served two purposes: to keep the chambers expanded during use; and to provide an operative area environment free of contamination. During the tests, the chambers were placed on various parts of a total body moulage to simulate management of several types of trauma. The tests consisted of cleansing contusions, debridement of burns, and suturing of lacerations. Also, indigo carmine dye was deliberately injected into the chamber during the tests to determine the ease of cleansing the chamber walls after contamination by escaping fluids. Upon completion of the tests, the expandable surgical chambers were deflated, folded, and placed in a flattened state back into their original containers for storage and later disposal. Results are briefly discussed.

Teaching Surgical Hysteroscopy with a Computer

PubMed

Lefebvre; Cote; Lefebvre

1996-08-01

Using a hysteroscope can be simulated on a computer. It will improve physician training by measuring basic knowledge and abilities, allow different interventions and anatomic variations, minimize the trauma of surgical intervention, and reduce operative casualties. An integrated questionnaire covers instrumentation, fluid infusion, power source, indications and preparation for endometrial ablation, surgical techniques, and complications to evaluate the user's knowledge. The operation simulation then proceeds. In the endometrial cavity, by virtual simulation, the operating field should appear in real time to allow physicians to adapt the trajectory of the instruments. The computer is an IBM PC compatible. We use a modified joystick with optical encoders to know the instrument position. The simulation can be repeated as desired. An evaluation system is integrated in the software to keep the user informed on the amount of burn area(s) that have been completed. This prototype model is available.

Experimental system, and its evaluation for the control of surgically inducted infections

NASA Technical Reports Server (NTRS)

Tevebaugh, M. D.; Nelson, J. P.

1972-01-01

The effect is reported to design, fabricate, test and evaluate a prototype experimental system for the control of surgically induced infections. The purpose is to provide the cleanest possible environment within a hospital surgery room and eliminate contamination sources that could cause infections during surgery. The system design is described. The system provides for a portable laminar flow clean room, a full bubble helmet system with associated communications and ventilation subsystems for operating room personnel, and surgical gowns that minimize the migration of bacteria. The development test results consisting of portability, laminar flowrate, air flow pattern, electrostatic buildup, noise level, ventilation, human factors, electrical and material compatibility tests are summarized. The conclusions are that the experimental system is effective in reducing the airborne and wound contamination although the helmets and gowns may not be a significant part of this reduction. Definitive conclusions with regard to the infection rate cannot be made at this time.

Design of a surgical robot with dynamic vision field control for Single Port Endoscopic Surgery.

PubMed

Kobayashi, Yo; Sekiguchi, Yuta; Tomono, Yu; Watanabe, Hiroki; Toyoda, Kazutaka; Konishi, Kozo; Tomikawa, Morimasa; Ieiri, Satoshi; Tanoue, Kazuo; Hashizume, Makoto; Fujie, Masaktsu G

2010-01-01

Recently, a robotic system was developed to assist Single Port Endoscopic Surgery (SPS). However, the existing system required a manual change of vision field, hindering the surgical task and increasing the degrees of freedom (DOFs) of the manipulator. We proposed a surgical robot for SPS with dynamic vision field control, the endoscope view being manipulated by a master controller. The prototype robot consisted of a positioning and sheath manipulator (6 DOF) for vision field control, and dual tool tissue manipulators (gripping: 5DOF, cautery: 3DOF). Feasibility of the robot was demonstrated in vitro. The "cut and vision field control" (using tool manipulators) is suitable for precise cutting tasks in risky areas while a "cut by vision field control" (using a vision field control manipulator) is effective for rapid macro cutting of tissues. A resection task was accomplished using a combination of both methods.

A Case Series of Rapid Prototyping and Intraoperative Imaging in Orbital Reconstruction

PubMed Central

Lim, Christopher G.T.; Campbell, Duncan I.; Cook, Nicholas; Erasmus, Jason

2014-01-01

In Christchurch Hospital, rapid prototyping (RP) and intraoperative imaging are the standard of care in orbital trauma and has been used since February 2013. RP allows the fabrication of an anatomical model to visualize complex anatomical structures which is dimensionally accurate and cost effective. This assists diagnosis, planning, and preoperative implant adaptation for orbital reconstruction. Intraoperative imaging involves a computed tomography scan during surgery to evaluate surgical implants and restored anatomy and allows the clinician to correct errors in implant positioning that may occur during the same procedure. This article aims to demonstrate the potential clinical and cost saving benefits when both these technologies are used in orbital reconstruction which minimize the need for revision surgery. PMID:26000080

A case series of rapid prototyping and intraoperative imaging in orbital reconstruction.

PubMed

Lim, Christopher G T; Campbell, Duncan I; Cook, Nicholas; Erasmus, Jason

2015-06-01

In Christchurch Hospital, rapid prototyping (RP) and intraoperative imaging are the standard of care in orbital trauma and has been used since February 2013. RP allows the fabrication of an anatomical model to visualize complex anatomical structures which is dimensionally accurate and cost effective. This assists diagnosis, planning, and preoperative implant adaptation for orbital reconstruction. Intraoperative imaging involves a computed tomography scan during surgery to evaluate surgical implants and restored anatomy and allows the clinician to correct errors in implant positioning that may occur during the same procedure. This article aims to demonstrate the potential clinical and cost saving benefits when both these technologies are used in orbital reconstruction which minimize the need for revision surgery.

Using CamiTK for rapid prototyping of interactive computer assisted medical intervention applications.

PubMed

Promayon, Emmanuel; Fouard, Céline; Bailet, Mathieu; Deram, Aurélien; Fiard, Gaëlle; Hungr, Nikolai; Luboz, Vincent; Payan, Yohan; Sarrazin, Johan; Saubat, Nicolas; Selmi, Sonia Yuki; Voros, Sandrine; Cinquin, Philippe; Troccaz, Jocelyne

2013-01-01

Computer Assisted Medical Intervention (CAMI hereafter) is a complex multi-disciplinary field. CAMI research requires the collaboration of experts in several fields as diverse as medicine, computer science, mathematics, instrumentation, signal processing, mechanics, modeling, automatics, optics, etc. CamiTK is a modular framework that helps researchers and clinicians to collaborate together in order to prototype CAMI applications by regrouping the knowledge and expertise from each discipline. It is an open-source, cross-platform generic and modular tool written in C++ which can handle medical images, surgical navigation, biomedicals simulations and robot control. This paper presents the Computer Assisted Medical Intervention ToolKit (CamiTK) and how it is used in various applications in our research team.

A review of rapid prototyping (RP) techniques in the medical and biomedical sector.

PubMed

Webb, P A

2000-01-01

The evolution of rapid prototyping (RP) technology is briefly discussed, and the application of RP technologies to the medical sector is reviewed. Although the use of RP technology has been slow arriving in the medical arena, the potential of the technique is seen to be widespread. Various uses of the technology within surgical planning, prosthesis development and bioengineering are discussed. Some possible drawbacks are noted in some applications, owing to the poor resolution of CT slice data in comparison with that available on RP machines, but overall, the methods are seen to be beneficial in all areas, with one early report suggesting large improvements in measurement and diagnostic accuracy as a result of using RP models.

Medical evaluations on the KC-135 1990 flight report summary

NASA Technical Reports Server (NTRS)

Lloyd, Charles W.; Guess, Terrell M.; Whiting, Charles W.; Doarn, Charles R.

1991-01-01

The medical investigations completed on the KC-135 during FY 1990 in support of the development of the Health Maintenance Facility and Medical Operations are discussed. The experiments are comprised of engineering evaluations of medical hardware and medical procedures. The investigating teams are made up of both medical and engineering personnel responsible for the development of medical hardware and medical operations. The hardware evaluated includes dental equipment, a coagulation analyzer, selected pharmaceutical aerosol devices, a prototype air/fluid separator, a prototype packaging and stowage system for medical supplies, a microliter metering system, and a workstation for minor surgical procedures. The results of these engineering evaluations will be used in the design of fleet hardware as well as to identify hardware specific training requirements.

Total mesorectal excision training in soft cadaver: feasibility and clinical application.

PubMed

Tantiphlachiva, Kasaya; Suansawan, Channarong

2006-09-01

The major problem in the treatment of rectal cancer is local recurrence. After the introduction of total mesorectal excision (TME), the recurrent rate decreased from 100% to around 10%. The purpose of the present study was to evaluate the quality of organ and tissue plane preservation in soft cadaver and to assess the feasibility to perform the procedure (mobilization of colon and rectum, total mesorectal excision and stapler anastomosis) in soft cadaver. Colorectal Division, Department of Surgery and Surgical Training Center Department of Anatomy, Faculty of Medicine, Chulalongkorn University. Prospective descriptive study. Seven soft cadavers were used for total mesorectal excision (TME) training. These procedures were performed by 21 participants (1 soft cadaver for 3 participants). The procedures were done under the supervision of experienced colorectal surgeons. The successfulness, satisfaction in performing the procedure and the quality of organ preservation were evaluated using standardized questionnaires. Participants were satisfied about TME training in soft cadaver (mean 8.24-8.71) and rated that soft cadavers were good in terms of internal organs and tissue plane preservation (mean 7.19-8.19) (0 = extremely unsatisfied, 10 = extremely satisfied). Training of TME in soft cadaver is feasible. The similarity in tissue quality (texture, consistency, color) of the preserved organs to that of the living and the good feel of performing the procedure make the trainee better understand the techniques and improve their skills.

Endoscopic therapy for weight loss: Gastroplasty, duodenal sleeves, intragastric balloons, and aspiration

PubMed Central

Kumar, Nitin

2015-01-01

A new paradigm in the treatment of obesity and metabolic disease is developing. The global obesity epidemic continues to expand despite the availability of diet and lifestyle counseling, pharmacologic therapy, and weight loss surgery. Endoscopic procedures have the potential to bridge the gap between medical therapy and surgery. Current primary endoscopic bariatric therapies can be classified as restrictive, bypass, space-occupying, or aspiration therapy. Restrictive procedures include the USGI Primary Obesity Surgery Endolumenal procedure, endoscopic sleeve gastroplasty using Apollo OverStitch, TransOral GAstroplasty, gastric volume reduction using the ACE stapler, and insertion of the TERIS restrictive device. Intestinal bypass has been reported using the EndoBarrier duodenal-jejunal bypass liner. A number of space-occupying devices have been studied or are in use, including intragastric balloons (Orbera, Reshape Duo, Heliosphere BAG, Obalon), Transpyloric Shuttle, and SatiSphere. The AspireAssist aspiration system has demonstrated efficacy. Finally, endoscopic revision of gastric bypass to address weight regain has been studied using Apollo OverStitch, the USGI Incisionless Operating Platform Revision Obesity Surgery Endolumenal procedure, Stomaphyx, and endoscopic sclerotherapy. Endoscopic therapies for weight loss are potentially reversible, repeatable, less invasive, and lower cost than various medical and surgical alternatives. Given the variety of devices under development, in clinical trials, and currently in use, patients will have multiple endoscopic options with greater efficacy than medical therapy, and with lower invasiveness and greater accessibility than surgery. PMID:26240686

Electrocautery device does not provide adequate pulmonary vessel sealing in transumbilical anatomic pulmonary lobectomy.

PubMed

Liu, Hung-Ping; Chu, Yen; Wu, Yi-Cheng; Hsieh, Ming-Ju; Liu, Chieng-Ying; Chen, Tzu-Ping; Chao, Yin-Kai; Wu, Ching-Yang; Yeh, Chi-Ju; Ko, Po-Jen; Liu, Yun-Hen

2016-05-01

Safe pulmonary vessel sealing device plays a crucial role in anatomic lung resection. In 2014, we reported high rates of massive bleeding complications during transumbilical lobectomy in a canine model due to difficulty in managing the pulmonary vessel with an endostapler. In this animal survival series, we aimed to evaluate the outcome of pulmonary vessel sealing with an electrocautery device to simplify the transumbilical thoracic surgery. Under general anesthesia, a 3-cm longitudinal incision was made over the umbilicus. Under video guidance, a bronchoscope was inserted through the incision for exploration. The diaphragmatic wound was created with an electrocautery knife and used as the entrance into the thoracic cavity. Using the transumbilical technique, anatomic lobectomy was performed with electrosurgical devices and endoscopic vascular staplers in 15 canines. Transumbilical endoscopic anatomic lobectomy was successfully completed in 12 of the 15 animals. Intraoperative bleeding developed in three animals during pulmonary hilum dissection, where one animal was killed due to hemodynamic instability and the other two animals required thoracotomy to complete the operation. There were five delayed bleeding and surgical mortality cases caused by inadequate vessel sealing by electrosurgical devices. Postmortem examination confirmed correct transumbilical lobectomy in the twelve animals that survived the operations. Transumbilical anatomic lobectomy is technically feasible in a canine model; however, the electrosurgical devices were not effective in sealing the pulmonary vessel in the current canine model.

Endoscopic therapy for weight loss: Gastroplasty, duodenal sleeves, intragastric balloons, and aspiration.

PubMed

Kumar, Nitin

2015-07-25

A new paradigm in the treatment of obesity and metabolic disease is developing. The global obesity epidemic continues to expand despite the availability of diet and lifestyle counseling, pharmacologic therapy, and weight loss surgery. Endoscopic procedures have the potential to bridge the gap between medical therapy and surgery. Current primary endoscopic bariatric therapies can be classified as restrictive, bypass, space-occupying, or aspiration therapy. Restrictive procedures include the USGI Primary Obesity Surgery Endolumenal procedure, endoscopic sleeve gastroplasty using Apollo OverStitch, TransOral GAstroplasty, gastric volume reduction using the ACE stapler, and insertion of the TERIS restrictive device. Intestinal bypass has been reported using the EndoBarrier duodenal-jejunal bypass liner. A number of space-occupying devices have been studied or are in use, including intragastric balloons (Orbera, Reshape Duo, Heliosphere BAG, Obalon), Transpyloric Shuttle, and SatiSphere. The AspireAssist aspiration system has demonstrated efficacy. Finally, endoscopic revision of gastric bypass to address weight regain has been studied using Apollo OverStitch, the USGI Incisionless Operating Platform Revision Obesity Surgery Endolumenal procedure, Stomaphyx, and endoscopic sclerotherapy. Endoscopic therapies for weight loss are potentially reversible, repeatable, less invasive, and lower cost than various medical and surgical alternatives. Given the variety of devices under development, in clinical trials, and currently in use, patients will have multiple endoscopic options with greater efficacy than medical therapy, and with lower invasiveness and greater accessibility than surgery.

Early experience with totally robotic Roux-en-Y gastric bypass for morbid obesity.

PubMed

Diamantis, Theodoros; Alexandrou, Andreas; Gouzis, Kostas; Alchanatis, Manos; Giannopoulos, Athanasios

2010-12-01

Laparoscopic Roux-en-Y gastric bypass (RYGBP) for morbid obesity is a challenging operation. The application of robotic techniques has been shown to ease the technical difficulties and reduce perioperative morbidity, mainly because it facilitates the construction of the gastrojejunal anastomosis (GJ). Robotic laparoscopic RYGBP (LRYGBP) has been reported either as totally robotic with manual suturing of the GJ or as robotically assisted with the use of the robot only for the construction of the GJ. A totally robotic LRYGBP with a combined stapled and manual GJ has never been reported. Nine consecutive patients underwent totally robotic LRYGBP. The GJ was fashioned with a combination of the linear stapler and manual suturing. Mean preoperative body mass index was 45.3 ± 4.7 kg/m(2). In 1 case, we had to undock the Da Vinci Surgical System at the time of the jejunojejunostomy due to unfavorable ergonomics. Mean time to dock the robot was 16.3 ± 3.3 minutes, whereas mean total operative time was 197.2 ± 12.3 minutes. Immediate postoperative morbidity and mortality equaled zero. One patient developed a stenosis of the GJ amenable to endoscopic dilatation. The mean excess weight loss rate 1-year postoperative was 79% ± 15%. Totally robotic LRYGBP can duplicate precisely any conventional technique without any compromise in operative time, short- or long-term results.

Treatment of retrogastric pancreatic pseudocysts by laparoscopic transgastric cystogastrostomy.

PubMed

Wu, Tian-Ming; Jin, Zhong-Kui; He, Qiang; Zhao, Xin; Kou, Jian-Tao; Fan, Hua

2017-10-01

This paper discusses variations of laparoscopic transgastric cystogastrostomy in management of retrogastric pancreatic pseudocysts for 8 patients with symptom or pseudocysts (larger than 6 cm) companied with clinical manifestations. Using a Harmonic scalpel, two 3-5-cm incisions were made in the anterior and posterior gastric wall respectively. In the last step, the anterior gastrotomy was closed with an Endo-GIA stapler. All cases were successfully treated without large blood loss and without conversion to open surgery. The mean operative time was 114.29±19.24 min, blood loss was 157.14±78.70 mL, and mean hospital stay was 8.29±2.98 days. Gastric fistula occurred in one case on the postoperative day 7, and closed 1 month later. No bleeding was seen in all patients during the perioperative follow-up period. CT scans, given one month after the surgeries, displayed that the pancreatic pseudocysts disappeared or decreased in size, and ultrasounds showed no fluid or food residue in stomas at the third and fifth month following surgery. No patient experienced a recurrence during the follow-up period. Transgastric laparoscopic cystogastrostomy is a minimally invasive surgical procedure with a high rate of success and a low rate of recurrence, accompanied by rapid recovery. It is easy to master, safe to perform and may be the preferred option to treat retrogastric pancreatic pseudocysts.

Treatment of Brodie's Syndrome using parasymphyseal distraction through virtual surgical planning and RP assisted customized surgical osteotomy guide-A mock surgery report

NASA Astrophysics Data System (ADS)

Dahake, Sandeep; Kuthe, Abhaykumar; Mawale, Mahesh

2017-10-01

This paper aims to describe virtual surgical planning (VSP), computer aided design (CAD) and rapid prototyping (RP) systems for the preoperative planning of accurate treatment of the Brodie's Syndrome. 3D models of the patient's maxilla and mandible were separately generated based on computed tomography (CT) image data and fabricated using RP. During the customized surgical osteotmy guide (CSOG) design process, the correct position was identified and the geometry of the CSOG was generated based on affected mandible of the patient and fabricated by a RP technique. Surgical approach such as preoperative planning and simulation of surgical procedures was performed using advanced software. The VSP and RP assisted CSOG was used to avoid the damage of the adjacent teeth and neighboring healthy tissues. Finally the mock surgery was performed on the biomodel (i.e. diseased RP model) of mandible with reference to the normal maxilla using osteotomy bur with the help of CSOG. Using this CSOG the exact osteotomy of the mandible and the accurate placement of the distractor were obtained. It ultimately improved the accuracy of the surgery in context of the osteotomy and distraction. The time required in cutting the mandible and placement of the distractor was found comparatively less than the regular free hand surgery.

Virtual reality based surgery simulation for endoscopic gynaecology.

PubMed

Székely, G; Bajka, M; Brechbühler, C; Dual, J; Enzler, R; Haller, U; Hug, J; Hutter, R; Ironmonger, N; Kauer, M; Meier, V; Niederer, P; Rhomberg, A; Schmid, P; Schweitzer, G; Thaler, M; Vuskovic, V; Tröster, G

1999-01-01

Virtual reality (VR) based surgical simulator systems offer very elegant possibilities to both enrich and enhance traditional education in endoscopic surgery. However, while a wide range of VR simulator systems have been proposed and realized in the past few years, most of these systems are far from able to provide a reasonably realistic surgical environment. We explore the basic approaches to the current limits of realism and ultimately seek to extend these based on our description and analysis of the most important components of a VR-based endoscopic simulator. The feasibility of the proposed techniques is demonstrated on a first modular prototype system implementing the basic algorithms for VR-training in gynaecologic laparoscopy.

Augmented reality in neurosurgery

PubMed Central

Tagaytayan, Raniel; Kelemen, Arpad

2016-01-01

Neurosurgery is a medical specialty that relies heavily on imaging. The use of computed tomography and magnetic resonance images during preoperative planning and intraoperative surgical navigation is vital to the success of the surgery and positive patient outcome. Augmented reality application in neurosurgery has the potential to revolutionize and change the way neurosurgeons plan and perform surgical procedures in the future. Augmented reality technology is currently commercially available for neurosurgery for simulation and training. However, the use of augmented reality in the clinical setting is still in its infancy. Researchers are now testing augmented reality system prototypes to determine and address the barriers and limitations of the technology before it can be widely accepted and used in the clinical setting. PMID:29765445

Augmented reality in neurosurgery.

PubMed

Tagaytayan, Raniel; Kelemen, Arpad; Sik-Lanyi, Cecilia

2018-04-01

Neurosurgery is a medical specialty that relies heavily on imaging. The use of computed tomography and magnetic resonance images during preoperative planning and intraoperative surgical navigation is vital to the success of the surgery and positive patient outcome. Augmented reality application in neurosurgery has the potential to revolutionize and change the way neurosurgeons plan and perform surgical procedures in the future. Augmented reality technology is currently commercially available for neurosurgery for simulation and training. However, the use of augmented reality in the clinical setting is still in its infancy. Researchers are now testing augmented reality system prototypes to determine and address the barriers and limitations of the technology before it can be widely accepted and used in the clinical setting.

Distributed augmented reality with 3-D lung dynamics--a planning tool concept.

PubMed

Hamza-Lup, Felix G; Santhanam, Anand P; Imielińska, Celina; Meeks, Sanford L; Rolland, Jannick P

2007-01-01

Augmented reality (AR) systems add visual information to the world by using advanced display techniques. The advances in miniaturization and reduced hardware costs make some of these systems feasible for applications in a wide set of fields. We present a potential component of the cyber infrastructure for the operating room of the future: a distributed AR-based software-hardware system that allows real-time visualization of three-dimensional (3-D) lung dynamics superimposed directly on the patient's body. Several emergency events (e.g., closed and tension pneumothorax) and surgical procedures related to lung (e.g., lung transplantation, lung volume reduction surgery, surgical treatment of lung infections, lung cancer surgery) could benefit from the proposed prototype.

Dexterity-Enhanced Telerobotic Microsurgery

NASA Technical Reports Server (NTRS)

Charles, Steve; Das, Hari; Ohm, Timothy; Boswell, Curtis; Rodriguez, Guillermo; Steele, Robert; Istrate, Dan

1997-01-01

The work reported in this paper is the result, of a collaboration between researchers at the Jet Propulsion Laboratory and Steve Charles, MD, a vitreo-retinal surgeon. The Robot Assisted MicroSurgery (RAMS) telerobotic workstation developed at JPL is a prototype of a system that will be completely under the manual control of a surgeon. The system has a slave robot that will hold surgical instruments. The slave robot motions replicate in six degrees of freedom those of tile. surgeon's hand measured using a master input device with a surgical instrument, shaped handle. The surgeon commands motions for the instrument by moving the handle in the desired trajectories. The trajectories are measured, filtered, and scaled down then used to drive the slave robot.