Test performance and acceptability of self- versus provider-collected swabs for high-risk HPV DNA testing in female-to-male trans masculine patients.

PubMed

Reisner, Sari L; Deutsch, Madeline B; Peitzmeier, Sarah M; White Hughto, Jaclyn M; Cavanaugh, Timothy P; Pardee, Dana J; McLean, Sarah A; Panther, Lori A; Gelman, Marcy; Mimiaga, Matthew J; Potter, Jennifer E

2018-01-01

High-risk human papillomavirus (hrHPV) causes virtually all cervical cancers. Trans masculine (TM) people (those assigned female at birth who identify with a gender other than female) have low uptake of conventional cervical cancer screening. Self-collected hrHPV DNA testing has high levels of acceptability among cisgender (non-transgender) females and may support increased cervical cancer screening uptake in TM individuals. To assess the test performance and acceptability of self-collected vaginal specimens in comparison to provider-collected cervical swabs for hrHPV DNA detection in TM individuals ages 21-64 years. Between March 2015-September 2016, 150 TM participants with a cervix (mean age = 27.5 years; SD = 5.7) completed a one-time study visit comprised of a self-report survey, self-collected vaginal HPV DNA swab, clinician-administered cervical HPV swab, and brief interview on acceptability of clinical procedures. Participants were randomized to complete either self- or provider-collection first to minimize ordering effects. Self- and provider-collected samples were tested for 13 hrHPV DNA types using a DNA Hybridization Assay. The primary outcome variable was the concordance (kappa statistic) and performance (sensitivity, specificity) of self-collected vaginal HPV DNA specimens versus provider-collected cervical HPV swabs as the gold standard. Of the 131 participants completing both the self- and provider-collected HPV tests, 21 cases of hrHPV were detected by the provider cervical swab (gold standard; 16.0% hrHPV prevalence); 15 of these cases were accurately detected by the self-collected vaginal swab (71.4% concordance) (Kappa = 0.75, 95% Confidence Interval [CI]: 0.59, 0.92; p<0.001). Compared to the provider-collected cervical hrHPV DNA sample (gold standard), the self-collected vaginal hrHPV DNA test demonstrated a sensitivity of 71.4% (95% CI: 0.52, 0.91; p = 0.0495) and specificity of 98.2% (95% CI: 0.96, 1.00; p<0.0001). Over 90% of participants endorsed a preference for the self-collected vaginal swab over provider-collected cervical swab. Self-collected vaginal swabs are highly acceptable to TM as a means to test for hrHPV DNA. Test performance of this self-collection method for hrHPV detection in TM is consistent with previous studies in cisgender females. Self-collected vaginal swab testing for hrHPV DNA represents a reasonable and patient-centered strategy for primary cervical cancer screening in TM patients unwilling to undergo provider collection of specimens via speculum exam.

Model depicting aspects of audit and feedback that impact physicians' acceptance of clinical performance feedback.

PubMed

Payne, Velma L; Hysong, Sylvia J

2016-07-13

Audit and feedback (A&F) is a strategy that has been used in various disciplines for performance and quality improvement. There is limited research regarding medical professionals' acceptance of clinical-performance feedback and whether feedback impacts clinical practice. The objectives of our research were to (1) investigate aspects of A&F that impact physicians' acceptance of performance feedback; (2) determine actions physicians take when receiving feedback; and (3) determine if feedback impacts physicians' patient-management behavior. In this qualitative study, we employed grounded theory methods to perform a secondary analysis of semi-structured interviews with 12 VA primary care physicians. We analyzed a subset of interview questions from the primary study, which aimed to determine how providers of high, low and moderately performing VA medical centers use performance feedback to maintain and improve quality of care, and determine perceived utility of performance feedback. Based on the themes emergent from our analysis and their observed relationships, we developed a model depicting aspects of the A&F process that impact feedback acceptance and physicians' patient-management behavior. The model is comprised of three core components - Reaction, Action and Impact - and depicts elements associated with feedback recipients' reaction to feedback, action taken when feedback is received, and physicians modifying their patient-management behavior. Feedback characteristics, the environment, external locus-of-control components, core values, emotion and the assessment process induce or deter reaction, action and impact. Feedback characteristics (content and timeliness), and the procedural justice of the assessment process (unjust penalties) impact feedback acceptance. External locus-of-control elements (financial incentives, competition), the environment (patient volume, time constraints) and emotion impact patient-management behavior. Receiving feedback generated intense emotion within physicians. The underlying source of the emotion was the assessment process, not the feedback. The emotional response impacted acceptance, impelled action or inaction, and impacted patient-management behavior. Emotion intensity was associated with type of action taken (defensive, proactive, retroactive). Feedback acceptance and impact have as much to do with the performance assessment process as it does the feedback. In order to enhance feedback acceptance and the impact of feedback, developers of clinical performance systems and feedback interventions should consider multiple design elements.

GFO and JASON Altimeter Engineering Assessment Report. Update: GFO-Acceptance to End of Mission on October 22, 2008, JASON-Acceptance to September 29, 2008

NASA Technical Reports Server (NTRS)

Conger, A. M.; Hancock, D. W., III; Hayne, G. S.; Brooks, R. L.

2009-01-01

The purpose of this document is to present and document GEOSAT Follow-On (GFO) performance analyses and results. This is the ninth Assessment Report since the initial report and is our final one. This report extends the performance assessment since acceptance on November 29, 2000 to the end of mission (EOM) on October 22, 2008. Since launch, February 10, 1998 to the EOM, we performed a variety of GFO performance studies; Appendix A provides an accumulative index of those studies. We began the inclusion of analyses of the JASON altimeter after the end of the Topographic Experiment (TOPEX) mission. Prior to this, JASON and TOPEX were compared during our assessment of the TOPEX altimeter. With the end of the TOPEX mission, we developed methods to report on JASON as it related to GFO. It should be noted the GFO altimeter, after operating for over 7 years, was power cycled off to on and on to off approximately 14 times a day for over 18 months in space with no failure. The GFO altimeter proved to be a remarkable instrument providing stable ocean surface measurements for nearly eight years. This report completes our GFO altimeter performance assessment.

External quality assessment studies for laboratory performance of molecular and serological diagnosis of Chikungunya virus infection.

PubMed

Jacobsen, Sonja; Patel, Pranav; Schmidt-Chanasit, Jonas; Leparc-Goffart, Isabelle; Teichmann, Anette; Zeller, Herve; Niedrig, Matthias

2016-03-01

Since the re-emergence of Chikungunya virus (CHIKV) in Reunion in 2005 and the recent outbreak in the Caribbean islands with an expansion to the Americas the CHIK diagnostic became very important. We evaluate the performance of laboratories regarding molecular and serological diagnostic of CHIK worldwide. A panel of 12 samples for molecular and 13 samples for serology were provided to 60 laboratories in 40 countries for evaluating the sensitivity and specificity of molecular and serology testing. The panel for molecular diagnostic testing was analysed by 56 laboratories returning 60 data sets of results whereas the 56 and 60 data sets were returned for IgG and IgM diagnostic from the participating laboratories. Twenty-three from 60 data sets performed optimal, 7 acceptable and 30 sets of results require improvement. From 50 data sets only one laboratory shows an optimal performance for IgM detection, followed by 9 data sets with acceptable and the rest need for improvement. From 46 IgG serology data sets 20 provide an optimal, 2 an acceptable and 24 require improvement performance. The evaluation of some of the diagnostic performances allows linking the quality of results to the in-house methods or commercial assays used. The external quality assurance for CHIK diagnostics provides a good overview on the laboratory performance regarding sensitivity and specificity for the molecular and serology diagnostic required for the quick and reliable analysis of suspected CHIK patients. Nearly half of the laboratories have to improve their diagnostic profile to achieve a better performance. Copyright © 2016 Z. Published by Elsevier B.V. All rights reserved.

Test performance and acceptability of self- versus provider-collected swabs for high-risk HPV DNA testing in female-to-male trans masculine patients

PubMed Central

Deutsch, Madeline B.; Peitzmeier, Sarah M.; White Hughto, Jaclyn M.; Cavanaugh, Timothy P.; Pardee, Dana J.; McLean, Sarah A.; Panther, Lori A.; Gelman, Marcy; Mimiaga, Matthew J.; Potter, Jennifer E.

2018-01-01

Background High-risk human papillomavirus (hrHPV) causes virtually all cervical cancers. Trans masculine (TM) people (those assigned female at birth who identify with a gender other than female) have low uptake of conventional cervical cancer screening. Self-collected hrHPV DNA testing has high levels of acceptability among cisgender (non-transgender) females and may support increased cervical cancer screening uptake in TM individuals. Objective To assess the test performance and acceptability of self-collected vaginal specimens in comparison to provider-collected cervical swabs for hrHPV DNA detection in TM individuals ages 21–64 years. Methods Between March 2015-September 2016, 150 TM participants with a cervix (mean age = 27.5 years; SD = 5.7) completed a one-time study visit comprised of a self-report survey, self-collected vaginal HPV DNA swab, clinician-administered cervical HPV swab, and brief interview on acceptability of clinical procedures. Participants were randomized to complete either self- or provider-collection first to minimize ordering effects. Self- and provider-collected samples were tested for 13 hrHPV DNA types using a DNA Hybridization Assay. The primary outcome variable was the concordance (kappa statistic) and performance (sensitivity, specificity) of self-collected vaginal HPV DNA specimens versus provider-collected cervical HPV swabs as the gold standard. Results Of the 131 participants completing both the self- and provider-collected HPV tests, 21 cases of hrHPV were detected by the provider cervical swab (gold standard; 16.0% hrHPV prevalence); 15 of these cases were accurately detected by the self-collected vaginal swab (71.4% concordance) (Kappa = 0.75, 95% Confidence Interval [CI]: 0.59, 0.92; p<0.001). Compared to the provider-collected cervical hrHPV DNA sample (gold standard), the self-collected vaginal hrHPV DNA test demonstrated a sensitivity of 71.4% (95% CI: 0.52, 0.91; p = 0.0495) and specificity of 98.2% (95% CI: 0.96, 1.00; p<0.0001). Over 90% of participants endorsed a preference for the self-collected vaginal swab over provider-collected cervical swab. Conclusion Self-collected vaginal swabs are highly acceptable to TM as a means to test for hrHPV DNA. Test performance of this self-collection method for hrHPV detection in TM is consistent with previous studies in cisgender females. Self-collected vaginal swab testing for hrHPV DNA represents a reasonable and patient-centered strategy for primary cervical cancer screening in TM patients unwilling to undergo provider collection of specimens via speculum exam. PMID:29538411

NCCS Regression Test Harness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tharrington, Arnold N.

2015-09-09

The NCCS Regression Test Harness is a software package that provides a framework to perform regression and acceptance testing on NCCS High Performance Computers. The package is written in Python and has only the dependency of a Subversion repository to store the regression tests.

The Kubler-Ross model, physician distress, and performance reporting.

PubMed

Smaldone, Marc C; Uzzo, Robert G

2013-07-01

Physician performance reporting has been proposed as an essential component of health-care reform, with the aim of improving quality by providing transparency and accountability. Despite strong evidence demonstrating regional variation in practice patterns and lack of evidence-based care, public outcomes reporting has been met with resistance from medical professionals. Application of the Kubler-Ross 'five stages of grief' model--a conceptual framework consisting of a series of emotional stages (denial, anger, bargaining, depression, and acceptance) inspired by work with terminally ill patients--could provide some insight into why physicians are reluctant to accept emerging quality-reporting mechanisms. Physician-led quality-improvement initiatives are vital to contemporary health-care reform efforts and applications in urology, as well as other medical disciplines, are currently being explored.

Acceptance test report for portable exhauster POR-007/Skid E

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriskovich, J.R.

1998-07-24

This document describes Acceptance Testing performed on Portable Exhauster POR-007/Skid E. It includes measurements of bearing vibration levels, pressure decay testing, programmable logic controller interlocks, high vacuum, flow and pressure control functional testing. The purpose of Acceptance testing documented by this report was to demonstrate compliance of the exhausters with the performance criteria established within HNF-0490, Rev. 1 following a repair and upgrade effort at Hanford. In addition, data obtained during this testing is required for the resolution of outstanding Non-conformance Reports (NCR), and finally, to demonstrate the functionality of the associated software for the pressure control and high vacuummore » exhauster operating modes provided for by W-320. Additional testing not required by the ATP was also performed to assist in the disposition and close out of receiving inspection report and for application design information (system curve). Results of this testing are also captured within this document.« less

5 CFR 293.404 - Retention schedule.

Code of Federal Regulations, 2010 CFR

2010-01-01

... acceptable performance from the date of the written advance notice of the proposed removal or reduction in....404 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PERSONNEL RECORDS Employee Performance File System Records § 293.404 Retention schedule. (a)(1) Except as provided...

Patient awareness and acceptability of antenatal perineal massage.

PubMed

Ismail, S I M F; Emery, S J

2013-11-01

Antenatal perineal massage is recommended to reduce perineal trauma at the time of delivery. The practice has been shown to be acceptable to pregnant women taking part in research studies. The aim of this study was to establish its acceptability to pregnant women in day-to-day clinical practice, as well as their awareness of its technique. An anonymous self-construct questionnaire was given to mothers after their first delivery. A total of 113 questionnaires were returned over a 4-month period. With regard to acceptability, 61.4% of respondents indicated that the practice was acceptable, only 25.7% felt the practice was embarrassing and 56.7% were happy for their husband/partner to perform it for them. With respect to awareness, 37.2% of the respondents had heard about the practice, 9.7% knew it should be practised from 34 weeks onwards, 11.5% knew it should be maintained for 5-10 min and 30.1% knew it ought to be performed daily. This showed first time mothers' awareness of antenatal perineal massage to be low, despite the idea being acceptable to them, which calls for action to improve awareness and provide more instruction and encouragement to take up the practice.

WRAP low level waste restricted waste management (LLW RWM) glovebox acceptance test report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leist, K.J.

1997-11-24

On April 22, 1997, the Low Level Waste Restricted Waste Management (LLW RWM) glovebox was tested using acceptance test procedure 13027A-87. Mr. Robert L. Warmenhoven served as test director, Mr. Kendrick Leist acted as test operator and test witness, and Michael Lane provided miscellaneous software support. The primary focus of the glovebox acceptance test was to examine glovebox control system interlocks, operator Interface Unit (OIU) menus, alarms, and messages. Basic drum port and lift table control sequences were demonstrated. OIU menus, messages, and alarm sequences were examined, with few exceptions noted. Barcode testing was bypassed, due to the lack ofmore » installed equipment as well as the switch from basic reliance on fixed bar code readers to the enhanced use of portable bar code readers. Bar code testing was completed during performance of the LLW RWM OTP. Mechanical and control deficiencies were documented as Test Exceptions during performance of this Acceptance Test. These items are attached as Appendix A to this report.« less

Spring performance tester for miniature extension springs

DOEpatents

Salzbrenner, Bradley; Boyce, Brad

2017-05-16

A spring performance tester and method of testing a spring are disclosed that has improved accuracy and precision over prior art spring testers. The tester can perform static and cyclic testing. The spring tester can provide validation for product acceptance as well as test for cyclic degradation of springs, such as the change in the spring rate and fatigue failure.

34 CFR 225.20 - When may a grantee draw down funds?

Code of Federal Regulations, 2010 CFR

2010-07-01

... SECONDARY EDUCATION, DEPARTMENT OF EDUCATION CREDIT ENHANCEMENT FOR CHARTER SCHOOL FACILITIES PROGRAM What... funds after it has signed a performance agreement acceptable to the Department of Education and the... performance agreement provided that the grantee requests to draw down and spend a specific amount of funds and...

Acceptance testing for PACS: from methodology to design to implementation

NASA Astrophysics Data System (ADS)

Liu, Brent J.; Huang, H. K.

2004-04-01

Acceptance Testing (AT) is a crucial step in the implementation process of a PACS within a clinical environment. AT determines whether the PACS is ready for clinical use and marks the official sign off of the PACS product. Most PACS vendors have Acceptance Testing (AT) plans, however, these plans do not provide a complete and robust evaluation of the full system. In addition, different sites will have different special requirements that vendor AT plans do not cover. The purpose of this paper is to introduce a protocol for AT design and present case studies of AT performed on clinical PACS. A methodology is presented that includes identifying testing components within PACS, quality assurance for both functionality and performance, and technical testing focusing on key single points-of-failure within the PACS product. Tools and resources that provide assistance in performing AT are discussed. In addition, implementation of the AT within the clinical environment and the overall implementation timeline of the PACS process are presented. Finally, case studies of actual AT of clinical PACS performed in the healthcare environment will be reviewed. The methodology for designing and implementing a robust AT plan for PACS was documented and has been used in PACS acceptance tests in several sites. This methodology can be applied to any PACS and can be used as a validation for the PACS product being acquired by radiology departments and hospitals. A methodology for AT design and implementation was presented that can be applied to future PACS installations. A robust AT plan for a PACS installation can increase both the utilization and satisfaction of a successful implementation of a PACS product that benefits both vendor and customer.

Providers' perceptions of the implementation of a performance measurement system for substance abuse treatment: A process evaluation of the Service Quality Measures initiative.

PubMed

Myers, Bronwyn; Williams, Petal Petersen; Johnson, Kim; Govender, Rajen; Manderscheid, Ron; Koch, J Randy

2016-02-22

In South Africa, concerns exist about the quality of substance abuse treatment. We developed a performance measurement system, known as the Service Quality Measures (SQM) initiative, to monitor the quality of treatment and assess efforts to improve quality of care. In 2014, the SQM system was implemented at six treatment sites to evaluate how implementation protocols could be improved in preparation for wider roll-out. To describe providers' perceptions of the feasibility and acceptability of implementing the SQM system, including barriers to and facilitators of implementation. We conducted 15 in-depth interviews (IDIs) with treatment providers from six treatment sites (two sites in KwaZulu-Natal and four in the Western Cape). Providers were asked about their experiences in implementing the system, the perceived feasibility of the system, and barriers to implementation. All IDIs were audio-recorded and transcribed verbatim. A framework approach was used to analyse the data. Providers reported that the SQM system was feasible to implement and acceptable to patients and providers. Issues identified through the IDIs included a perceived lack of clarity about sequencing of key elements in the implementation of the SQM system, questions on integration of the system into clinical care pathways, difficulties in tracking patients through the system, and concerns about maximising patient participation in the process. Findings suggest that the SQM system is feasible to implement and acceptable to providers, but that some refinements to the implementation protocols are needed to maximise patient participation and the likelihood of sustained implementation.

Small Airplane Certification Compliance Program

DOT National Transportation Integrated Search

1997-01-02

This advisory circular (AC) provides a compilation of historically acceptable means of compliance to specifically selected sections of Part 23 of the Federal Aviation Regulations that have become burdensome for small low performance airplanes to show...

Pavement Performance : Approaches Using Predictive Analytics

DOT National Transportation Integrated Search

2018-03-23

Acceptable pavement condition is paramount to road safety. Using predictive analytics techniques, this project attempted to develop models that provide an assessment of pavement condition based on an array of indictors that include pavement distress,...

Effects of Exterior Insulation on Moisture Performance of Wood-Frame Walls in the Pacific Northwest: Measurements and Hygrothermal Modeling

Treesearch

Samuel V. Glass; Borjen Yeh; Benjamin J. Herzog

2016-01-01

Continuous exterior insulation on above-grade walls is becoming more common in many parts of North America. It is generally accepted that exterior insulation provides advantages for energy performance, by reducing thermal bridging, and for moisture performance, by warming the wood structural members, thereby reducing the potential for wintertime moisture accumulation....

Low-lift-to-drag-ratio approach and landing studies using a CV-990 airplane

NASA Technical Reports Server (NTRS)

Kock, B. M.; Fulton, F. L.; Drinkwater, F. J., III

1972-01-01

The results are presented of a flight-test program utilizing a CV-990 airplane, flow in low-lift-to-drag-ratio (L/D) configurations, to simulate terminal area operation, approach, and landing of large unpowered vehicles. The results indicate that unpowered approaches and landings are practical with vehicles of the size and performance characteristics of the proposed shuttle vehicle. Low L/D landings provided touchdown dispersion patterns acceptable for operation on runways of reasonable length. The dispersion pattern was reduced when guidance was used during the final approach. High levels of pilot proficiency were not required for acceptable performance.

Evaluation of the performance of a micromethod for measuring urinary iodine by using six sigma quality metrics.

PubMed

Hussain, Husniza; Khalid, Norhayati Mustafa; Selamat, Rusidah; Wan Nazaimoon, Wan Mohamud

2013-09-01

The urinary iodine micromethod (UIMM) is a modification of the conventional method and its performance needs evaluation. UIMM performance was evaluated using the method validation and 2008 Iodine Deficiency Disorders survey data obtained from four urinary iodine (UI) laboratories. Method acceptability tests and Sigma quality metrics were determined using total allowable errors (TEas) set by two external quality assurance (EQA) providers. UIMM obeyed various method acceptability test criteria with some discrepancies at low concentrations. Method validation data calculated against the UI Quality Program (TUIQP) TEas showed that the Sigma metrics were at 2.75, 1.80, and 3.80 for 51±15.50 µg/L, 108±32.40 µg/L, and 149±38.60 µg/L UI, respectively. External quality control (EQC) data showed that the performance of the laboratories was within Sigma metrics of 0.85-1.12, 1.57-4.36, and 1.46-4.98 at 46.91±7.05 µg/L, 135.14±13.53 µg/L, and 238.58±17.90 µg/L, respectively. No laboratory showed a calculated total error (TEcalc)

A Note on the Determination of "Acceptable" Performance in Thorndike's Standard of Fair Selection.

ERIC Educational Resources Information Center

Brown, Charles

1980-01-01

The determination of acceptable performance in Thorndike's constant ratio standard of fair selection is considered. It is shown that suitable choice of acceptable performance can make any minority-majority selection disparity consistent with Thorndike's standard. A rule for determining acceptable performance which avoids the Petersen-Novick…

Training a Mentally Retarded Woman to Work Competitively: Effect of Graphic Feedback and a Changing Criterion Design.

ERIC Educational Resources Information Center

Davis, Paula; And Others

1983-01-01

An on-the-job coach provided graphic feedback on the food service performance of a moderately retarded young woman. Her performance improved to a production range acceptable for competive employment. Feedback from co-workers revealed, however, that she was still not functioning adequately. (CL)

A Systems Analysis to Define the Types of Rations Needed to Support Amphibious Operations

DTIC Science & Technology

1985-09-01

Navy and the individual Marine) and in cost. • RATION QUALITY - High Acceptance - Maximize Quality - Minimize Menu Cycle As one of four...maintaining high customer acceptance. Carbohydrate-enhanced A- or B-Ration menus would be provided to embarked (shipboard) Marines for approximately 72...assistance; 2) the typical dietery myth that high protein meals are what will "help me perform at my peak" would be circumvented; the Marine would

Investigation of aged hot-mix asphalt pavements.

DOT National Transportation Integrated Search

2013-09-01

Over the lifetime of an asphalt concrete (AC) pavement, the roadway requires periodic resurfacing and rehabilitation to provide : acceptable performance. The most popular resurfacing method is an asphalt overlay over the existing roadway. In the desi...

Prospective memory in an air traffic control simulation: External aids that signal when to act

PubMed Central

Loft, Shayne; Smith, Rebekah E.; Bhaskara, Adella

2011-01-01

At work and in our personal life we often need to remember to perform intended actions at some point in the future, referred to as Prospective Memory. Individuals sometimes forget to perform intentions in safety-critical work contexts. Holding intentions can also interfere with ongoing tasks. We applied theories and methods from the experimental literature to test the effectiveness of external aids in reducing prospective memory error and costs to ongoing tasks in an air traffic control simulation. Participants were trained to accept and hand-off aircraft, and to detect aircraft conflicts. For the prospective memory task participants were required to substitute alternative actions for routine actions when accepting target aircraft. Across two experiments, external display aids were provided that presented the details of target aircraft and associated intended actions. We predicted that aids would only be effective if they provided information that was diagnostic of target occurrence and in this study we examined the utility of aids that directly cued participants when to allocate attention to the prospective memory task. When aids were set to flash when the prospective memory target aircraft needed to be accepted, prospective memory error and costs to ongoing tasks of aircraft acceptance and conflict detection were reduced. In contrast, aids that did not alert participants specifically when the target aircraft were present provided no advantage compared to when no aids we used. These findings have practical implications for the potential relative utility of automated external aids for occupations where individuals monitor multi-item dynamic displays. PMID:21443381

Prospective memory in an air traffic control simulation: external aids that signal when to act.

PubMed

Loft, Shayne; Smith, Rebekah E; Bhaskara, Adella

2011-03-01

At work and in our personal life we often need to remember to perform intended actions at some point in the future, referred to as Prospective Memory. Individuals sometimes forget to perform intentions in safety-critical work contexts. Holding intentions can also interfere with ongoing tasks. We applied theories and methods from the experimental literature to test the effectiveness of external aids in reducing prospective memory error and costs to ongoing tasks in an air traffic control simulation. Participants were trained to accept and hand-off aircraft and to detect aircraft conflicts. For the prospective memory task, participants were required to substitute alternative actions for routine actions when accepting target aircraft. Across two experiments, external display aids were provided that presented the details of target aircraft and associated intended actions. We predicted that aids would only be effective if they provided information that was diagnostic of target occurrence, and in this study, we examined the utility of aids that directly cued participants when to allocate attention to the prospective memory task. When aids were set to flash when the prospective memory target aircraft needed to be accepted, prospective memory error and costs to ongoing tasks of aircraft acceptance and conflict detection were reduced. In contrast, aids that did not alert participants specifically when the target aircraft were present provided no advantage compared to when no aids were used. These findings have practical implications for the potential relative utility of automated external aids for occupations where individuals monitor multi-item dynamic displays.

Risk measures for power failures in transmission systems

NASA Astrophysics Data System (ADS)

Cassidy, Alex; Feinstein, Zachary; Nehorai, Arye

2016-11-01

We present a novel framework for evaluating the risk of failures in power transmission systems. We use the concept of systemic risk measures from the financial mathematics literature with models of power system failures in order to quantify the risk of the entire power system for design and comparative purposes. The proposed risk measures provide the collection of capacity vectors for the components in the system that lead to acceptable outcomes. Keys to the formulation of our measures of risk are two elements: a model of system behavior that provides the (distribution of) outcomes based on component capacities and an acceptability criterion that determines whether a (random) outcome is acceptable from an aggregated point of view. We examine the effects of altering the line capacities on energy not served under a variety of networks, flow manipulation methods, load shedding schemes, and load profiles using Monte Carlo simulations. Our results provide a quantitative comparison of the performance of these schemes, measured by the required line capacity. These results provide more complete descriptions of the risks of power failures than the previous, one-dimensional metrics.

Acceptance of family planning methods by induced abortion seekers: An observational study over five years.

PubMed

Kathpalia, S K

2016-01-01

Prior to legalization of abortion, induced abortions were performed in an illegal manner and that resulted in many complications hence abortion was legalized in India in 1971 and the number of induced abortions has been gradually increasing since then. One way of preventing abortions is to provide family planning services to these abortion seekers so that same is not repeated. The study was performed to find out the acceptance of contraception after abortion. A prospective study was performed over a period of five years from 2010 to 2014. The study group included all the cases reporting for abortion. A proforma was filled in detail to find out the type of contraception being used before pregnancy and acceptance of contraception after abortion. The existing facilities were also evaluated. 1228 abortions were performed over a period of five years. 94.5% of abortions were during the first trimester. 39.9% had not used any contraceptive before, contraceptives used were natural and barrier which had high failure. The main indication for seeking abortion was failure of contraception and completion of family. 39.6% of patients accepted sterilization as a method of contraception. The existing post abortion family planning services are inadequate. Post abortion period is one which is important to prevent subsequent abortions and family planning services after abortion need to be strengthened.

Acceptance of family planning methods by induced abortion seekers: An observational study over five years

PubMed Central

Kathpalia, S.K.

2016-01-01

Background Prior to legalization of abortion, induced abortions were performed in an illegal manner and that resulted in many complications hence abortion was legalized in India in 1971 and the number of induced abortions has been gradually increasing since then. One way of preventing abortions is to provide family planning services to these abortion seekers so that same is not repeated. The study was performed to find out the acceptance of contraception after abortion. Methods A prospective study was performed over a period of five years from 2010 to 2014. The study group included all the cases reporting for abortion. A proforma was filled in detail to find out the type of contraception being used before pregnancy and acceptance of contraception after abortion. The existing facilities were also evaluated. Results 1228 abortions were performed over a period of five years. 94.5% of abortions were during the first trimester. 39.9% had not used any contraceptive before, contraceptives used were natural and barrier which had high failure. The main indication for seeking abortion was failure of contraception and completion of family. 39.6% of patients accepted sterilization as a method of contraception. The existing post abortion family planning services are inadequate. Conclusion Post abortion period is one which is important to prevent subsequent abortions and family planning services after abortion need to be strengthened. PMID:26900216

Emollient product design: objective measurements of formulation structure, texture and performance, and subjective assessments of user acceptability.

PubMed

Antonijević, M D; Owusu-Ware, S; Sanchon-Lopez, B

2018-06-01

The choice of prescribed emollients is usually based on cost and patient preference. Differences in formulations can affect user acceptability. To compare the physical performance, user acceptability and various product design features of two emollient gels that are prescribed in the UK and alleged to be therapeutically interchangeable because their formulations are described as having the same contents of oily ingredients. We found that here are in fact significant measurable differences between the structure and performance of the two formulations, which materially affect their user acceptability. These differences are attributed to the use of different types of gelling agents and other ingredients of differing grades/quality and concentrations, and probably due to the formulations being made by different manufacturing processes. We also identified other product design features that are important to user appeal, including the type of container in which the formulations are presented, the type of dispensing devices provided, and the nature and form of the supplied user instructions. Patients and prescribers should be aware that there can be important differences in performance and user appeal between emollients, even between products that, superficially, may appear to be very similar. These important performance aspects should be characterized for new emollient introductions to encourage better informed product selection. © 2018 The Authors. Clinical and Experimental Dermatology published by John Wiley & Sons Ltd on behalf of British Association of Dermatologists, North American Clinical Dermatologic Society and St Johns Dermatological Society.

FT4 Data Analysis Summary (SSI-ARC)

NASA Technical Reports Server (NTRS)

Isaacson, Douglas R.; Gong, Chester; Reardon, Scott Edward; Santiago, Confesor

2016-01-01

Standards for Unmanned Aircraft System (UAS) Detect-and-Avoid (DAA) systems are currently being developed under the auspices of the RTCA Special Committee 228 (SC-228). To support the development of these standards, a series of flight tests has been conducted at NASAs Armstrong Flight Research Center (NASA-AFRC). The fourth in this series of flight test activities (Flight Test 4, or simply FT4) was conducted during the Spring and Summer of 2016. FT4 supported the objectives of numerous organizations working toward UAS DAA Minimum Operational Performance Standards (MOPS) and UAS DAA Radar MOPS. The summary provided herein is limited to the objectives, analysis and conclusions of the NASA Ames Research Center (NASA-ARC) SSI team toward the refinement of UAS DAA MOPS. This document provides a high-level overview of FT4 and the SSI-ARC objectives, a summary of the data analysis methodology and recommendations for UAS DAA MOPS refinements based on the data analysis results. A total of 72 encounters were flown to support SSI-ARC objectives. Test results were generally consistent with acceptable UAS DAA system performance and will be considered in broader SC-228 requirements validation efforts. Observed alert lead times indicated acceptable UAS DAA alerting performance. Effective interoperability between the UAS DAA system and the Traffic Alert and Collision Avoidance System (TCAS) was observed with one notable exception: TCAS Resolutions Advisories (RA) were observed in the absence of any DAA alert on two occasions, indicating the need for alert parameter refinement. Findings further indicated the need for continued work in the areas of DAA Well Clear Recovery logic and alert stability for Mode-C-only intruders. Finally, results demonstrated a high level of compliance with a set of evaluation criteria designed to provide anecdotal evidence of acceptable UAS DAA system performance.

INPRO Assessment of an INS in the Area of Safety of Fuel Cycle Installations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raj, B.; Busurin, Y.; Depisch, F.

2006-07-01

INPRO has defined requirements organized in a hierarchy of Basic Principles, User Requirements and Criteria (consisting of an indicator and an acceptance limit) to be met by innovative nuclear reactor systems (INS) in six areas, namely: economics, safety, waste management, environment, proliferation resistance, and infrastructure. If an INS meets all requirements in all areas it represents a sustainable system for the supply of energy, capable of making a significant contribution to meeting the energy needs of the 21. century. Draft manuals have been developed, for each INPRO area, to provide guidance for performing an assessment of whether an INS meetsmore » the INPRO requirements in a given area. The manuals set out the information that needs to be assembled to perform an assessment and provide guidance on selecting the acceptance limits and, for a given INS, for determining the value of the indicators for comparison with the associated acceptance limits. Each manual also includes an example of a specific assessment to illustrate the guidance. This paper discusses the manual for performing an INPRO assessment in the area of safety of fuel cycle installations. The example, chosen solely for the purpose of illustrating the INPRO methodology, describes an assessment of an MOX fuel fabrication plant based on sol-gel technology and illustrates an assessment performed for an INS at an early stage of development. The safety issues and the assessment steps are presented in detail in the paper. (authors)« less

TESTING AND ACCEPTANCE OF FUEL PLATES FOR RERTR FUEL DEVELOPMENT EXPERIMENTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.M. Wight; G.A. Moore; S.C. Taylor

2008-10-01

This paper discusses how candidate fuel plates for RERTR Fuel Development experiments are examined and tested for acceptance prior to reactor insertion. These tests include destructive and nondestructive examinations (DE and NDE). The DE includes blister annealing for dispersion fuel plates, bend testing of adjacent cladding, and microscopic examination of archive fuel plates. The NDE includes Ultrasonic (UT) scanning and radiography. UT tests include an ultrasonic scan for areas of “debonds” and a high frequency ultrasonic scan to determine the "minimum cladding" over the fuel. Radiography inspections include identifying fuel outside of the maximum fuel zone and measurements and calculationsmore » for fuel density. Details of each test are provided and acceptance criteria are defined. These tests help to provide a high level of confidence the fuel plate will perform in the reactor without a breach in the cladding.« less

Investigation of aged hot-mix asphalt pavements : technical summary.

DOT National Transportation Integrated Search

2013-09-01

Over the lifetime of an asphalt concrete (AC) pavement, the roadway requires periodic resurfacing and rehabilitation to provide acceptable performance. The most popular resurfacing method is an asphalt overlay over the existing roadway. In the design...

Preprototype SAWD subsystem

NASA Technical Reports Server (NTRS)

Nalette, T. A.

1984-01-01

A regenerable, three man preprototype solid amine, water desorbed (SAWD) CO2 removal and concentation subsystem was designed, fabricated, and successfully acceptance tested by Hamilton Standard. The preprototype SAWD incorporates a single solid amine canister to perform the CO2 removal function, an accumulator to provide the CO2 storage and delivery function, and a microprocessor which automatically controls the subsystem sequential operation and performance. The SAWD subsystem was configured to have a CO2 removal and CO2 delivery capability at the rate of 0.12 kg/hr (0.264 lb/hr) over the relative humidity range of 35 to 70%. The controller was developed to provide fully automatic control over the relative humidity range via custom software that was generated specifically for the SAWD subsystem. The preprototype SAWD subsystem demonstrated a total of 281 hours (208) cycles of operation during ten acceptance tests that were conducted over the 3 to 70% relative humidity range. This operation was comprised of 178 hours (128 cycles) in the CO2 overboard mode and 103 hours (80 cycles) in the CO2 reduction mode. The average CO2 removal/delivery rate met or exceeded the design specification rate of 0.12 kg/hr (0.254 lb/hr) for all ten of the acceptance tests.

The impact of an immunization check-up at a pharmacist-provided employee health screening.

PubMed

Sparkman, Amy; Brookhart, Andrea L; Goode, Jean-Venable Kelly R

To determine which types of vaccine recommendations were accepted and acted upon by patients after an immunization check-up at a pharmacist-provided employee health screening, and to evaluate if there was a difference between influenza and non-influenza vaccines. Retrospective, observational. Supermarket chain. Employees and covered spouses. Immunization check-up. Acceptance rate of immunization recommendation. This retrospective observational study evaluated the impact of an immunization check-up in individuals who participated in one of the 252 pharmacist-provided health screenings in central Virginia in 2015. All employee health screenings were completed from July 1, 2015, to September 30, 2015. Because immunization status was assessed 6 months after each person received his or her health screening, data were collected from January 1, 2016, to March 30, 2016, and analyzed to collect the number and type of vaccines recommended during the immunization check-up. Each eligible participant's profile was evaluated to determine if he or she received the vaccines at any Kroger pharmacy within 6 months. Patient identifiers were not collected; however, demographics including age, relevant disease state history, and smoking status were collected with immunization recommendations and uptake. Data were analyzed with the use of descriptive statistics. A total of 349 immunization recommendations were made, including 248 influenza; 42 pneumococcal polysaccharide (PPSV23); 40 tetanus, diphtheria, and pertussis (Tdap); 12 herpes zoster; 4 pneumococcal conjugate (PCV13); and 3 hepatitis B. Both influenza and PCV13 had acceptance rates of 50%, and herpes zoster, Tdap, hepatitis B, and PPSV23 had 42%, 35%, 33%, and 24% acceptance rates, respectively. Influenza recommendations had a 50% acceptance rate compared with a 32% acceptance rate of non-influenza recommendations (P = 0.002). An immunization check-up performed at a pharmacist-provided employee health screening can lead to patient acceptance of recommendations and receipt of needed immunizations. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

The need for performance criteria in evaluating the durability of wood products

Treesearch

Stan Lebow; Bessie Woodward; Patricia Lebow; Carol Clausen

2010-01-01

Data generated from wood-product durability evaluations can be difficult to interpret. Standard methods used to evaluate the potential long-term durability of wood products often provide little guidance on interpretation of test results. Decisions on acceptable performance for standardization and code compliance are based on the judgment of reviewers or committees....

US/UK Loan Account Project Status PMOD477

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stevens, Patrice A.

2012-07-12

The viewgraphs describe the status of PMOD477 for LANL. The meeting will occur at DOE-HQ with NA-11 and Military Applications personnel in attendance. Serves to repatriate material with a balance to zero by December 2012. Phase 1 -- Establish formality of operations for War Reserve (WR): Complete surrogate taskings to A90 through a Materials Channel and perform US/UK lessons learned; Complete the US/UK agreed Quality Acceptance Plan, Materials Plan, Shipping procedure, and establish the formal UK/US point of contacts. Phase 2 -- Metal Manufacture (WR): Process material and store material as electrorefined metal (ER) rings, with initial assay and isotopicmore » analysis, prior to manufacturing. Material is cast into accepted configuration and appropriate acceptance document for each aliquot will be generated. Phase 3 -- Intermediate Material Manufacture, Packaging and Shipping (WR): Continue processing of the material in accepted configuration with appropriate acceptance documentation for each aliquot. Provide an initial tasking of the material owed to UK including appropriate quality acceptance documentation. Phase 4 -- Complete Tasking (WR). Phase 5 -- Residue Processing (Non-WR): Complete processing of residue material and waste into accepted configuration with appropriate acceptance document for disposal.« less

Manufacturing of Wearable Sensors for Human Health and Performance Monitoring

NASA Astrophysics Data System (ADS)

Alizadeh, Azar

2015-03-01

Continuous monitoring of physiological and biological parameters is expected to improve performance and medical outcomes by assessing overall health status and alerting for life-saving interventions. Continuous monitoring of these parameters requires wearable devices with an appropriate form factor (lightweight, comfortable, low energy consuming and even single-use) to avoid disrupting daily activities thus ensuring operation relevance and user acceptance. Many previous efforts to implement remote and wearable sensors have suffered from high cost and poor performance, as well as low clinical and end-use acceptance. New manufacturing and system level design approaches are needed to make the performance and clinical benefits of these sensors possible while satisfying challenging economic, regulatory, clinical, and user-acceptance criteria. In this talk we will review several recent design and manufacturing efforts aimed at designing and building prototype wearable sensors. We will discuss unique opportunities and challenges provided by additive manufacturing, including 3D printing, to drive innovation through new designs, faster prototyping and manufacturing, distributed networks, and new ecosystems. We will also show alternative hybrid self-assembly based integration techniques for low cost large scale manufacturing of single use wearable devices. Coauthors: Prabhjot Singh and Jeffrey Ashe.

Payload Performance of TDRS KL and Future Services

NASA Technical Reports Server (NTRS)

Toral, Marco A.; Heckler, Gregory W.; Pogorelc, Patricia M.; George, Nicholas E.; Han, Katherine S.

2017-01-01

NASA has accepted two of the 3nd generation Tracking and Data Relay Satellites, TDRS K, L, and M, designed and built by Boeing Defense, Space Security (DSS). TDRS K, L, and M provide S-band Multiple Access (MA) service and S-band, Ku-band and Ka-band Single Access (SA) services to near Earth orbiting satellites. The TDRS KLM satellites offer improved services relative to the 1st generation TDRS spacecraft, such as: an enhanced MA service featuring increased EIRPs and GT; and Ka-band SA capability which provides a 225 and 650 MHz return service (customer-to-TDRS direction) bandwidth and a 50 MHz forward service (TDRS-to-customer direction) bandwidth. MA services are provided through a 15 element forward phased array that forms up to two beams with onboard active beamforming and a 32 element return phased array supported by ground-based beamforming. SA services are provided through two 4.6m tri-band reflector antennas which support program track pointing and autotrack pointing. Prior to NASAs acceptance of the satellites, payload on-orbit testing was performed on each satellite to determine on-orbit compliance with design requirements. Performance parameters evaluated include: EIRP, GT, antenna gain patterns, SA antenna autotrack performance, and radiometric tracking performance. On-orbit antenna calibration and pointing optimization was also performed on the MA and SA antennas including 24 hour duration tests to characterize and calibrate out diurnal effects. Bit-Error-Rate (BER) tests were performed to evaluate the end-to-end link BER performance of service through a TDRS K and L spacecraft. The TDRS M is planned to be launched in August 2017. This paper summarizes the results of the TDRS KL communications payload on-orbit performance verification and end-to-end service characterization and compares the results with the performance of the 2nd generation TDRS J. The paper also provides a high-level overview of an optical communications application that will augment the data rates supported by the Space Network.

Payload Performance of Third Generation TDRS and Future Services

NASA Technical Reports Server (NTRS)

Toral, Marco; Heckler, Gregory; Pogorelc, Patsy; George, Nicholas; Han, Katherine S.

2017-01-01

NASA has accepted two of the 3rd generation Tracking and Data Relay Satellites, TDRS K, L, and M, designed and built by Boeing Defense, Space & Security (DSS). TDRS K, L, and M provide S-band Multiple Access (MA) service and S-band, Ku-band and Ka-band Single Access (SA) services to near Earth orbiting satellites. The TDRS KLM satellites offer improved services relative to the 1st generation TDRS spacecraft, such as: an enhanced MA service featuring increased EIRPs and G/T; and Ka-band SA capability which provides a 225 and 650 MHz return service (customer-to-TDRS direction) bandwidth and a 50 MHz forward service (TDRS-to-customer direction) bandwidth. MA services are provided through a 15 element forward phased array that forms up to two beams with onboard active beamforming and a 32 element return phased array supported by ground-based beamforming. SA services are provided through two 4.6m tri-band reflector antennas which support program track pointing and autotrack pointing. Prior to NASAs acceptance of the satellites, payload on-orbit testing was performed on each satellite to determine on-orbit compliance with design requirements. Performance parameters evaluated include: EIRP, G/T, antenna gain patterns, SA antenna autotrack performance, and radiometric tracking performance. On-orbit antenna calibration and pointing optimization was also performed on the MA and SA antennas including 24 hour duration tests to characterize and calibrate out diurnal effects. Bit-Error-Rate (BER) tests were performed to evaluate the end-to-end link BER performance of service through a TDRS K and L spacecraft. The TDRS M is planned to be launched in August 2017. This paper summarizes the results of the TDRS KL communications payload on-orbit performance verification and end-to-end service characterization and compares the results with the performance of the 2nd generation TDRS J. The paper also provides a high-level overview of an optical communications application that will augment the data rates supported by the Space Network.

Analysis of space telescope data collection system

NASA Technical Reports Server (NTRS)

Ingels, F. M.; Schoggen, W. O.

1982-01-01

An analysis of the expected performance for the Multiple Access (MA) system is provided. The analysis covers the expected bit error rate performance, the effects of synchronization loss, the problem of self-interference, and the problem of phase ambiguity. The problem of false acceptance of a command word due to data inversion is discussed. A mathematical determination of the probability of accepting an erroneous command word due to a data inversion is presented. The problem is examined for three cases: (1) a data inversion only, (2) a data inversion and a random error within the same command word, and a block (up to 256 48-bit words) containing both a data inversion and a random error.

Use of organs from donors with bloodstream infection, pneumonia, and influenza: Results of a survey of infectious diseases practitioners.

PubMed

Mehta, Sanjay R; Logan, Cathy; Kotton, Camille N; Kumar, Deepali; Aslam, Saima

2017-02-01

Potential organ donors may be admitted with an infection to an intensive care unit, or contract a nosocomial infection during their stay, increasing the risk of potential transmission to the recipient. Because of a lack of practice guidelines and large-scale data on this topic, we undertook a survey to assess the willingness of transplant infectious diseases (ID) physicians to accept such organs. We performed a 10-question survey of ID providers from the American Society of Transplantation Infectious Disease Community of Practice to determine the scope of practice regarding acceptance of organs from donors with bloodstream infection, pneumonia, and influenza prior to organ procurement, as well as management of such infections following transplantation. Among 60 respondents to our survey, a majority indicated that organs would be accepted from donors bacteremic with streptococci (76%) or Enterobacteriaceae (73%) without evidence of drug resistance. Acceptance rates varied based on infecting organism, type of organ, and center size. Ten percent of respondents would accept an organ from a donor bacteremic with a carbapenem-resistant organism. Over 90% of respondents would accept an organ other than a lung from a donor with influenza on treatment, compared with 52% that would accept a lung in the same setting. This study is the first to our knowledge to survey transplant ID providers regarding acceptance of organs based on specific infections in the donor. These decisions are often based on limited published data and experience. Better characterization of the outcomes from donors with specific types of infection could lead to liberalization of organ acceptance practices across centers. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Acceptance test report for portable exhauster POR-008/Skid F

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriskovich, J.R.

1998-07-24

Portable Exhauster POR-008 was procured via HNF-0490, Specification for a Portable Exhausted System for Waste Tank Ventilation. Prior to taking ownership, acceptance testing was performed at the vendors. However at the conclusion of testing a number of issues remained that required resolution before the exhausters could be used by Project W-320. The purpose of acceptance testing documented by this report was to demonstrate compliance of the exhausters with the performance criteria established within HNF-O49O, Rev. 1 following a repair and upgrade effort at Hanford. In addition, data obtained during this testing is required for the resolution of outstanding Non-conformance Reportsmore » (NCR), and finally, to demonstrate the functionality of the associated software for the pressure control and high vacuum exhauster operating modes provided for by W-320. Additional testing not required by the ATP was also performed to assist in the disposition and close out of receiving inspection report and for application design information (system curve). Results of this testing are also captured within this document.« less

Secondary Waste Cast Stone Waste Form Qualification Testing Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Westsik, Joseph H.; Serne, R. Jeffrey

2012-09-26

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is being constructed to treat the 56 million gallons of radioactive waste stored in 177 underground tanks at the Hanford Site. The WTP includes a pretreatment facility to separate the wastes into high-level waste (HLW) and low-activity waste (LAW) fractions for vitrification and disposal. The LAW will be converted to glass for final disposal at the Integrated Disposal Facility (IDF). Cast Stone – a cementitious waste form, has been selected for solidification of this secondary waste stream after treatment in the ETF. The secondary-waste Cast Stone waste form must be acceptablemore » for disposal in the IDF. This secondary waste Cast Stone waste form qualification testing plan outlines the testing of the waste form and immobilization process to demonstrate that the Cast Stone waste form can comply with the disposal requirements. Specifications for the secondary-waste Cast Stone waste form have not been established. For this testing plan, Cast Stone specifications are derived from specifications for the immobilized LAW glass in the WTP contract, the waste acceptance criteria for the IDF, and the waste acceptance criteria in the IDF Permit issued by the State of Washington. This testing plan outlines the testing needed to demonstrate that the waste form can comply with these waste form specifications and acceptance criteria. The testing program must also demonstrate that the immobilization process can be controlled to consistently provide an acceptable waste form product. This testing plan also outlines the testing needed to provide the technical basis for understanding the long-term performance of the waste form in the disposal environment. These waste form performance data are needed to support performance assessment analyses of the long-term environmental impact of the secondary-waste Cast Stone waste form in the IDF« less

Solar energy facility at North Hampton Recreation Center, Dallas, Texas

NASA Technical Reports Server (NTRS)

1980-01-01

The solar energy facility located at the North Hampton Park Recreation and Health Center, Dallas, Texas is presented. The solar energy system is installed in a single story (two heights), 16,000 sq ft building enclosing a gymnasium, locker area, and health care clinic surrounded by a recreational area and athletic field. The solar energy system is designed to provide 80 percent of the annual space heating, 48 percent of the annual space cooling, and 90 percent of the domestic hot water requirements. The system's operation modes and performance data acquisition system are described. The system's performance during the months of June, July, August, September, and October of 1979 are presented and show a negative savings of energy. Experience to date indicates however that the system concept has promise of acceptable performance. It is concluded that if proper control and sequencing components was maintained, then the system performance would improve to an acceptable level.

Annual Status Report (FY2017): Performance Assessment for the Disposal of Low-Level Waste in the 200 East Area Burial Grounds.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nichols, Will E.; Mehta, S.; Nell, R. M.

This annual review provides the projected dose estimates of radionuclide inventories disposed in the active 200 East Area Low-Level Waste Burial Grounds (LLBGs) since September 26, 1988. The estimates are calculated using the original dose methodology developed in the performance assessment (PA) analysis (WHC-SD-WM-TI-7301). The estimates are compared with performance objectives defined in U.S. Department of Energy (DOE) requirements (DOE O 435.1 Chg 1,2 and companion documents DOE M 435.1-1 Chg 13 and DOE G 435.1-14). All performance objectives are currently satisfied, and operational waste acceptance criteria (HNF-EP-00635) and waste acceptance practices continue to be sufficient to maintain compliance withmore » performance objectives. Inventory estimates and associated dose estimates from future waste disposal actions are unchanged from previous years’ evaluations, which indicate potential impacts well below performance objectives. Therefore, future compliance with DOE O 435.1 Chg 1 is expected.« less

Annual Status Report (FY2017): Performance Assessment for the Disposal of Low-Level Waste in the 200 West Area Burial Grounds.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nichols, Will E; Nell, R. M.; Mehta, S.

This annual review provides the projected dose estimates of radionuclide inventories disposed in the active 200 West Area Low-Level Waste Burial Grounds (LLBGs) since September 26, 1988. These estimates are calculated using the original dose methodology developed in the performance assessment (PA) analysis (WHC-EP-06451). These estimates are compared with performance objectives defined in U.S. Department of Energy (DOE) requirements (DOE O 435.1 Chg 12 and its companion documents DOE M 435.1-1 Chg 13 and DOE G 435.1-14). All performance objectives are currently satisfied, and operational waste acceptance criteria (HNF-EP-00635) and waste acceptance practices continue to be sufficient to maintain compliancemore » with performance objectives. Inventory estimates and associated dose estimates from future waste disposal actions are unchanged from previous years’ evaluations, which indicate potential impacts well below performance objectives. Therefore, future compliance with DOE O 435.1 Chg 1 is expected.« less

Performance of Clinical Laboratories in South African Parasitology Proficiency Testing Surveys between 2004 and 2010

PubMed Central

Dini, Leigh; Frean, John

2012-01-01

Performance in proficiency testing (PT) schemes is an objective measure of a laboratory's best performance. We examined the performance of participants in two parasitology PT schemes in South Africa from 2004 through 2010. The average rates of acceptable scores over the period were 58% and 66% for the stool and blood parasite schemes, respectively. In our setting, participation in PT alone is insufficient to improve performance; a policy that provides additional resources and training seems necessary. PMID:22814470

Improving Individual Acceptance of Health Clouds through Confidentiality Assurance.

PubMed

Ermakova, Tatiana; Fabian, Benjamin; Zarnekow, Rüdiger

2016-10-26

Cloud computing promises to essentially improve healthcare delivery performance. However, shifting sensitive medical records to third-party cloud providers could create an adoption hurdle because of security and privacy concerns. This study examines the effect of confidentiality assurance in a cloud-computing environment on individuals' willingness to accept the infrastructure for inter-organizational sharing of medical data. We empirically investigate our research question by a survey with over 260 full responses. For the setting with a high confidentiality assurance, we base on a recent multi-cloud architecture which provides very high confidentiality assurance through a secret-sharing mechanism: Health information is cryptographically encoded and distributed in a way that no single and no small group of cloud providers is able to decode it. Our results indicate the importance of confidentiality assurance in individuals' acceptance of health clouds for sensitive medical data. Specifically, this finding holds for a variety of practically relevant circumstances, i.e., in the absence and despite the presence of conventional offline alternatives and along with pseudonymization. On the other hand, we do not find support for the effect of confidentiality assurance in individuals' acceptance of health clouds for non-sensitive medical data. These results could support the process of privacy engineering for health-cloud solutions.

Improving Individual Acceptance of Health Clouds through Confidentiality Assurance

PubMed Central

Fabian, Benjamin; Zarnekow, Rüdiger

2016-01-01

Summary Background Cloud computing promises to essentially improve healthcare delivery performance. However, shifting sensitive medical records to third-party cloud providers could create an adoption hurdle because of security and privacy concerns. Objectives This study examines the effect of confidentiality assurance in a cloud-computing environment on individuals’ willingness to accept the infrastructure for inter-organizational sharing of medical data. Methods We empirically investigate our research question by a survey with over 260 full responses. For the setting with a high confidentiality assurance, we base on a recent multi-cloud architecture which provides very high confidentiality assurance through a secret-sharing mechanism: Health information is cryptographically encoded and distributed in a way that no single and no small group of cloud providers is able to decode it. Results Our results indicate the importance of confidentiality assurance in individuals’ acceptance of health clouds for sensitive medical data. Specifically, this finding holds for a variety of practically relevant circumstances, i.e., in the absence and despite the presence of conventional offline alternatives and along with pseudonymization. On the other hand, we do not find support for the effect of confidentiality assurance in individuals’ acceptance of health clouds for non-sensitive medical data. These results could support the process of privacy engineering for health-cloud solutions. PMID:27781238

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turkington, T.

This education session will cover the physics and operation principles of gamma cameras and PET scanners. The first talk will focus on PET imaging. An overview of the principles of PET imaging will be provided, including positron decay physics, and the transition from 2D to 3D imaging. More recent advances in hardware and software will be discussed, such as time-of-flight imaging, and improvements in reconstruction algorithms that provide for options such as depth-of-interaction corrections. Quantitative applications of PET will be discussed, as well as the requirements for doing accurate quantitation. Relevant performance tests will also be described. Learning Objectives: Bemore » able to describe basic physics principles of PET and operation of PET scanners. Learn about recent advances in PET scanner hardware technology. Be able to describe advances in reconstruction techniques and improvements Be able to list relevant performance tests. The second talk will focus on gamma cameras. The Nuclear Medicine subcommittee has charged a task group (TG177) to develop a report on the current state of physics testing of gamma cameras, SPECT, and SPECT/CT systems. The report makes recommendations for performance tests to be done for routine quality assurance, annual physics testing, and acceptance tests, and identifies those needed satisfy the ACR accreditation program and The Joint Commission imaging standards. The report is also intended to be used as a manual with detailed instructions on how to perform tests under widely varying conditions. Learning Objectives: At the end of the presentation members of the audience will: Be familiar with the tests recommended for routine quality assurance, annual physics testing, and acceptance tests of gamma cameras for planar imaging. Be familiar with the tests recommended for routine quality assurance, annual physics testing, and acceptance tests of SPECT systems. Be familiar with the tests of a SPECT/CT system that include the CT images for SPECT reconstructions. Become knowledgeable of items to be included in annual acceptance testing reports including CT dosimetry and PACS monitor measurements. T. Turkington, GE Healthcare.« less

7 CFR 1753.39 - Closeout documents.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., 1400 Independence Ave., SW., Washington, DC 20250-1522. (d) Grounding system audit. A grounding system audit shall be performed and found acceptable for equipment provided under Form 525 and 545 Contracts... AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Purchase and Installation of...

Locating Anomalies in Complex Data Sets Using Visualization and Simulation

NASA Technical Reports Server (NTRS)

Panetta, Karen

2001-01-01

The research goals are to create a simulation framework that can accept any combination of models written at the gate or behavioral level. The framework provides the ability to fault simulate and create scenarios of experiments using concurrent simulation. In order to meet these goals we have had to fulfill the following requirements. The ability to accept models written in VHDL, Verilog or the C languages. The ability to propagate faults through any model type. The ability to create experiment scenarios efficiently without generating every possible combination of variables. The ability to accept adversity of fault models beyond the single stuck-at model. Major development has been done to develop a parser that can accept models written in various languages. This work has generated considerable attention from other universities and industry for its flexibility and usefulness. The parser uses LEXX and YACC to parse Verilog and C. We have also utilized our industrial partnership with Alternative System's Inc. to import vhdl into our simulator. For multilevel simulation, we needed to modify the simulator architecture to accept models that contained multiple outputs. This enabled us to accept behavioral components. The next major accomplishment was the addition of "functional fault models". Functional fault models change the behavior of a gate or model. For example, a bridging fault can make an OR gate behave like an AND gate. This has applications beyond fault simulation. This modeling flexibility will make the simulator more useful for doing verification and model comparison. For instance, two or more versions of an ALU can be comparatively simulated in a single execution. The results will show where and how the models differed so that the performance and correctness of the models may be evaluated. A considerable amount of time has been dedicated to validating the simulator performance on larger models provided by industry and other universities.

49 CFR Appendix C to Part 238 - Suspension System Safety Performance Standards

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Suspension System Safety Performance Standards C... industry standard acceptable to FRA is developed and approved under the procedures provided in § 238.21. (a... as follows: ER12MY99.005 where: δ=flange angle (deg). μ=coefficient of friction of 0.5. (2) The net...

49 CFR Appendix C to Part 238 - Suspension System Safety Performance Standards

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Suspension System Safety Performance Standards C... industry standard acceptable to FRA is developed and approved under the procedures provided in § 238.21. (a... as follows: ER12MY99.005 where: δ=flange angle (deg). μ=coefficient of friction of 0.5. (2) The net...

Perimeter intrusion alarm systems - May 1980 (Rev. 2)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-01-01

This guide describes six types of perimeter intrusion alarm systems and sets forth criteria for their performance and use as a means acceptable to the NRC staff for meeting specified portions of the Commission's regulations. It also references a document (SAND 76-0554) that provides additional information in this area, especially on the subject of combining sensors to yield a better overall performance.

Evaluation of an Intelligent Tutoring System in Pathology: Effects of External Representation on Performance Gains, Metacognition, and Acceptance

PubMed Central

Crowley, Rebecca S.; Legowski, Elizabeth; Medvedeva, Olga; Tseytlin, Eugene; Roh, Ellen; Jukic, Drazen

2007-01-01

Objective Determine effects of computer-based tutoring on diagnostic performance gains, meta-cognition, and acceptance using two different problem representations. Describe impact of tutoring on spectrum of diagnostic skills required for task performance. Identify key features of student-tutor interaction contributing to learning gains. Design Prospective, between-subjects study, controlled for participant level of training. Resident physicians in two academic pathology programs spent four hours using one of two interfaces which differed mainly in external problem representation. The case-focused representation provided an open-learning environment in which students were free to explore evidence-hypothesis relationships within a case, but could not visualize the entire diagnostic space. The knowledge-focused representation provided an interactive representation of the entire diagnostic space, which more tightly constrained student actions. Measurements Metrics included results of pretest, post-test and retention-test for multiple choice and case diagnosis tests, ratios of performance to student reported certainty, results of participant survey, learning curves, and interaction behaviors during tutoring. Results Students had highly significant learning gains after one tutoring session. Learning was retained at one week. There were no differences between the two interfaces in learning gains on post-test or retention test. Only students in the knowledge-focused interface exhibited significant metacognitive gains from pretest to post-test and pretest to retention test. Students rated the knowledge-focused interface significantly higher than the case-focused interface. Conclusions Cognitive tutoring is associated with improved diagnostic performance in a complex medical domain. The effect is retained at one-week post-training. Knowledge-focused external problem representation shows an advantage over case-focused representation for metacognitive effects and user acceptance. PMID:17213494

Evaluation of an intelligent tutoring system in pathology: effects of external representation on performance gains, metacognition, and acceptance.

PubMed

Crowley, Rebecca S; Legowski, Elizabeth; Medvedeva, Olga; Tseytlin, Eugene; Roh, Ellen; Jukic, Drazen

2007-01-01

Determine effects of computer-based tutoring on diagnostic performance gains, meta-cognition, and acceptance using two different problem representations. Describe impact of tutoring on spectrum of diagnostic skills required for task performance. Identify key features of student-tutor interaction contributing to learning gains. Prospective, between-subjects study, controlled for participant level of training. Resident physicians in two academic pathology programs spent four hours using one of two interfaces which differed mainly in external problem representation. The case-focused representation provided an open-learning environment in which students were free to explore evidence-hypothesis relationships within a case, but could not visualize the entire diagnostic space. The knowledge-focused representation provided an interactive representation of the entire diagnostic space, which more tightly constrained student actions. Metrics included results of pretest, post-test and retention-test for multiple choice and case diagnosis tests, ratios of performance to student reported certainty, results of participant survey, learning curves, and interaction behaviors during tutoring. Students had highly significant learning gains after one tutoring session. Learning was retained at one week. There were no differences between the two interfaces in learning gains on post-test or retention test. Only students in the knowledge-focused interface exhibited significant metacognitive gains from pretest to post-test and pretest to retention test. Students rated the knowledge-focused interface significantly higher than the case-focused interface. Cognitive tutoring is associated with improved diagnostic performance in a complex medical domain. The effect is retained at one-week post-training. Knowledge-focused external problem representation shows an advantage over case-focused representation for metacognitive effects and user acceptance.

Comparing self- and provider-collected swabbing for HPV DNA testing in female-to-male transgender adult patients: a mixed-methods biobehavioral study protocol.

PubMed

Reisner, Sari L; Deutsch, Madeline B; Peitzmeier, Sarah M; White Hughto, Jaclyn M; Cavanaugh, Timothy; Pardee, Dana J; McLean, Sarah; Marrow, Elliot J; Mimiaga, Matthew J; Panther, Lori; Gelman, Marcy; Green, Jamison; Potter, Jennifer

2017-06-23

Cervical cancer, nearly all cases of which are caused by one of several high-risk strains of the human papillomavirus (hr-HPV), leads to significant morbidity and mortality in individuals with a cervix. Trans masculine (TM) individuals were born with female reproductive organs and identify as male, man, transgender man, or another diverse gender identity different from their female assigned sex at birth. Routine preventive sexual health screening of TM patients is recommended, including screening for cervical cancer and other sexually transmitted infections (STIs); however, as many as one in three TM patients are not up-to-date per recommended U.S. Among cisgender (non-transgender) women, self-swab hr.-HPV DNA testing as a primary cervical cancer screening method and self-swab specimen collection for other STIs have high levels of acceptability. No study has yet been conducted to compare the performance and acceptability of self- and provider-collected swabs for hr.-HPV DNA testing and other STIs in TM patients. This article describes the study protocol for a mixed-methods biobehavioral investigation enrolling 150 sexually active TM to (1) assess the clinical performance and acceptability of a vaginal self-swab for hr.-HPV DNA testing compared to provider cervical swab and cervical cytology, and (2) gather acceptability data on self-collected specimens for other STIs. Study participation entails a one-time clinical visit at Fenway Health in Boston, MA comprised of informed consent, quantitative assessment, venipuncture for syphilis testing and HIV (Rapid OraQuick) testing, randomization, collection of biological specimens/biomarkers, participant and provider satisfaction survey, and qualitative exit interview. Participants are compensated $100. The primary study outcomes are concordance (kappa statistic) and performance (sensitivity and specificity) of self-collected vaginal HPV DNA specimens vs provider-collected cervical HPV swabs as a gold standard. This study addresses critical gaps in current clinical knowledge of sexual health in TM patients, including comparing alternative strategies for screening and diagnosis of cervical cancer, hr.-HPV, and other STIs. Findings have implications for improving the delivery of sexual health screening to this often overlooked and underserved patient population. Less-invasive patient-centered strategies may also generalize to other at-risk cisgender female populations that face barriers to timely and needed STI and cervical cancer screening. ClinicalTrials.gov ID: NCT02401867.

NASA Technology Investments in Electric Propulsion: New Directions in the New Millennium

NASA Technical Reports Server (NTRS)

Sankovic, John M.

2002-01-01

The last decade was a period of unprecedented acceptance of NASA developed electric propulsion by the user community. The benefits of high performance electric propulsion systems are now widely recognized, and new technologies have been accepted across the commonly. NASA clearly recognizes the need for new, high performance, electric propulsion technologies for future solar system missions and is sponsoring aggressive efforts in this area. These efforts are mainly conducted under the Office of Aerospace Technology. Plans over the next six years include the development of next generation ion thrusters for end of decade missions. Additional efforts are planned for the development of very high power thrusters, including magnetoplasmadynamic, pulsed inductive, and VASIMR, and clusters of Hall thrusters. In addition to the in-house technology efforts, NASA continues to work closely with both supplier and user communities to maximize the acceptance of new technology in a timely and cost-effective manner. This paper provides an overview of NASA's activities in the area of electric propulsion with an emphasis on future program directions.

Multidisciplinary ALS Telemedicine Care: The Store and Forward Method.

PubMed

Pulley, Michael T; Brittain, Rebecca; Hodges, Wayne; Frazier, Christine; Miller, Leslie; Matyjasik-Liggett, Maria; Maurer, Susan; Peters, Melissa; Solomon, Kimberly; Berger, Alan R

2018-05-26

ALS patients benefit from multidisciplinary care in an ALS clinic. We studied whether multidisciplinary care of ALS patients using the store and forward method of telemedicine was feasible and acceptable to patients and providers. ALS patients seen in the UF Jacksonville ALS clinic were eligible. A trained telemedicine nurse performed and recorded a multidisciplinary assessment of the patient in their home. Clinic team members reviewed the assessments, provided recommendations and the clinic director discussed the plan with the patient via videoconference. Patient and provider satisfaction was evaluated using surveys. 18 patients completed a total of 27 telemedicine visits. Patient satisfaction was excellent and provider satisfaction was very good. The store and forward method of telemedicine is an acceptable alternative to live telemedicine for the multidisciplinary care of ALS patients. This method of care may improve access to multidisciplinary care for this patient population. This article is protected by copyright. All rights reserved. © 2018 Wiley Periodicals, Inc.

Attitudes of Nurses Toward Pressure Ulcer Prevention: A Literature Review.

PubMed

Waugh, Shirley M

2014-01-01

Despite the existence of accepted guidelines to prevent pressure ulcers, interventions are not performed consistently. Many variables, including nurses' attitudes, contribute to the development of pressure ulcers. A review of the literature on nurses' attitudes toward pressure ulcer prevention is provided.

Who Is Your Coach?

ERIC Educational Resources Information Center

Bowman, Richard F.

2017-01-01

Initial teacher licensing is intended to provide public assurance of core competence in classroom settings. Core competence's implicit vulnerability is mediocrity. In daily practice, many educators appear satisfied in reaching a merely acceptable level of performance, thus minimizing the period of effortful skill acquisition required to attain…

Guidelines for the assessment and acceptance of potential brain-dead organ donors

PubMed Central

Westphal, Glauco Adrieno; Garcia, Valter Duro; de Souza, Rafael Lisboa; Franke, Cristiano Augusto; Vieira, Kalinca Daberkow; Birckholz, Viviane Renata Zaclikevis; Machado, Miriam Cristine; de Almeida, Eliana Régia Barbosa; Machado, Fernando Osni; Sardinha, Luiz Antônio da Costa; Wanzuita, Raquel; Silvado, Carlos Eduardo Soares; Costa, Gerson; Braatz, Vera; Caldeira Filho, Milton; Furtado, Rodrigo; Tannous, Luana Alves; de Albuquerque, André Gustavo Neves; Abdala, Edson; Gonçalves, Anderson Ricardo Roman; Pacheco-Moreira, Lúcio Filgueiras; Dias, Fernando Suparregui; Fernandes, Rogério; Giovanni, Frederico Di; de Carvalho, Frederico Bruzzi; Fiorelli, Alfredo; Teixeira, Cassiano; Feijó, Cristiano; Camargo, Spencer Marcantonio; de Oliveira, Neymar Elias; David, André Ibrahim; Prinz, Rafael Augusto Dantas; Herranz, Laura Brasil; de Andrade, Joel

2016-01-01

Organ transplantation is the only alternative for many patients with terminal diseases. The increasing disproportion between the high demand for organ transplants and the low rate of transplants actually performed is worrisome. Some of the causes of this disproportion are errors in the identification of potential organ donors and in the determination of contraindications by the attending staff. Therefore, the aim of the present document is to provide guidelines for intensive care multi-professional staffs for the recognition, assessment and acceptance of potential organ donors. PMID:27737418

Use of red palm oil in local snacks can increase intake of provitamin A carotenoids in young aborigines children: a Malaysian experience.

PubMed

Ng, T K W; Low, C X; Kong, J P; Cho, Y L

2012-12-01

Carotenoid-rich red palm oil (RPO)-based snacks have been provided to children in impoverished communities to improve their vitamin A status. The non-availabilty of information on the acceptability of RPO-based snacks by Malaysian aborigines (Orang Asli) children forms the basis of this study. Twenty-one Orang Asli children, majority of whom had normal body mass index for age (BMI-for-age) and aged 4.73 +/- 0.92 years in Sungai Tekir, Negeri Sembilan were provided with three freshly-prepared snacks (springroll, curry puff or doughnut) each containing one teaspoon or 5 ml of RPO per serving, on separate mornings. On the fourth morning, one serving each of all 3 different snacks was provided together on a plate to every child for consumption and preference for the snacks recorded. The children's habitual vitamin A intakes were assessed by a semi-quantitative food frequency questionnaire (FFQ) and carotenoid retention tests for the prepared snacks were performed by column chromatography. Fifty-four percent of the children did not meet their RNI for vitamin A. Based on acceptance criterion of consuming at least one-half serving of the snacks provided, springroll and curry puff recorded 100% acceptability while doughnut had 82% acceptability. Preference of snack was in the order, springroll (47%) > doughtnut (35%) > curry puff (18%), but a Z-test test for proportions showed no statistical significance. Carotenoid retention tests showed great variation between snacks namely, doughnut (100%) > springroll (84%) > curry puff (45%). The overall findings indicate that the RPO-based snacks are highly acceptable and can be used to improve the dietary intake of provitamin A carotenoids of Malaysian Orang Asli children.

Protection afforded by respirators when performing endotracheal intubation using a direct laryngoscope, GlideScope®, and i-gel® device: A randomized trial

PubMed Central

Lim, Tae Ho; Oh, Jaehoon; Lee, Juncheol; Shin, Hyungoo

2018-01-01

Emergency physicians are at risk of infection during invasive procedures, and wearing a respirator can reduce this risk. The aim of this study was to determine whether the protection afforded by a respirator during intubation is affected by the type of airway device used. In this randomized crossover study, 26 emergency physicians underwent quantitative fit tests for a N95 respirator (cup-type or fold-type) before and during intubation with a direct laryngoscope, GlideScope®, or i-gel® airway device. The primary outcome was the fit factor value of the respirator and the secondary outcome was the level of acceptable protection provided (percentage of fit factor scores above 100). Compared with the GlideScope and i-gel device, the fit factor values and level of acceptable protection provided were lower when physicians wore the cup-type respirator while intubating using the direct laryngoscope (200 fit factor [152–200] and 200 fit factor [121.25–200] versus 166 fit factor [70–200], 100% and 100% versus 75%, respectively; all P < 0.001). There were no significant differences in the fit factor value or level of acceptable protection provided when the physicians wore the fold-type respirator while intubating using any of the three airway devices (all P > 0.05). The type of airway device used for endotracheal intubation may influence the protective performance of some types of respirators. Emergency physicians should consider the effects of airway device types on fit factor of N95 respirators, when they perform intubation at risk of infection. PMID:29672533

Probability of Failure Analysis Standards and Guidelines for Expendable Launch Vehicles

NASA Astrophysics Data System (ADS)

Wilde, Paul D.; Morse, Elisabeth L.; Rosati, Paul; Cather, Corey

2013-09-01

Recognizing the central importance of probability of failure estimates to ensuring public safety for launches, the Federal Aviation Administration (FAA), Office of Commercial Space Transportation (AST), the National Aeronautics and Space Administration (NASA), and U.S. Air Force (USAF), through the Common Standards Working Group (CSWG), developed a guide for conducting valid probability of failure (POF) analyses for expendable launch vehicles (ELV), with an emphasis on POF analysis for new ELVs. A probability of failure analysis for an ELV produces estimates of the likelihood of occurrence of potentially hazardous events, which are critical inputs to launch risk analysis of debris, toxic, or explosive hazards. This guide is intended to document a framework for POF analyses commonly accepted in the US, and should be useful to anyone who performs or evaluates launch risk analyses for new ELVs. The CSWG guidelines provide performance standards and definitions of key terms, and are being revised to address allocation to flight times and vehicle response modes. The POF performance standard allows a launch operator to employ alternative, potentially innovative methodologies so long as the results satisfy the performance standard. Current POF analysis practice at US ranges includes multiple methodologies described in the guidelines as accepted methods, but not necessarily the only methods available to demonstrate compliance with the performance standard. The guidelines include illustrative examples for each POF analysis method, which are intended to illustrate an acceptable level of fidelity for ELV POF analyses used to ensure public safety. The focus is on providing guiding principles rather than "recipe lists." Independent reviews of these guidelines were performed to assess their logic, completeness, accuracy, self- consistency, consistency with risk analysis practices, use of available information, and ease of applicability. The independent reviews confirmed the general validity of the performance standard approach and suggested potential updates to improve the accuracy each of the example methods, especially to address reliability growth.

30 CFR 7.44 - Technical requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... nonmetallic materials shall meet the acceptable performance criteria for the impact test in § 7.46... material under part 18 of this chapter; and (ii) Meet the acceptable performance criteria for the...) Battery box and cover insulating material shall meet the acceptable performance criteria for the acid...

30 CFR 7.44 - Technical requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... nonmetallic materials shall meet the acceptable performance criteria for the impact test in § 7.46... material under part 18 of this chapter; and (ii) Meet the acceptable performance criteria for the...) Battery box and cover insulating material shall meet the acceptable performance criteria for the acid...

Characterization of a Two-Stage Pulse Tube Cooler for Space Applications

NASA Astrophysics Data System (ADS)

Orsini, R.; Nguyen, T.; Colbert, R.; Raab, J.

2010-04-01

A two-stage long-life, low mass and efficient pulse tube cooler for space applications has been developed and acceptance tested for flight applications. This paper presents the data collected on four flight coolers during acceptance testing. Flight acceptance test of these cryocoolers includes thermal performance mapping over a range of reject temperatures, launch vibration testing and thermal cycling testing. Designed conservatively for a 10-year life, the coolers are required to provide simultaneous cooling powers at 95 K and 180 K while rejecting to 300 K with less than 187 W input power to the electronics. The total mass of each cooler and electronics system is 8.7 kg. The radiation-hardened and software driven control electronics provides cooler control functions which are fully re-configurable in orbit. These functions include precision temperature control to better than 100 mK p-p. This 2 stage cooler has heritage to the 12 Northrop Grumman Aerospace Systems (NGAS) coolers currently on orbit with 2 operating for more than 11.5 years.

Assessing the utility of TAM, TPB, and UTAUT for advanced driver assistance systems.

PubMed

Rahman, Md Mahmudur; Lesch, Mary F; Horrey, William J; Strawderman, Lesley

2017-11-01

Advanced Driver Assistance Systems (ADAS) are intended to enhance driver performance and improve transportation safety. The potential benefits of these technologies, such as reduction in number of crashes, enhancing driver comfort or convenience, decreasing environmental impact, etc., have been acknowledged by transportation safety researchers and federal transportation agencies. Although these systems afford safety advantages, they may also challenge the traditional role of drivers in operating vehicles. Driver acceptance, therefore, is essential for the implementation of these systems into the transportation system. Recognizing the need for research into the factors affecting driver acceptance, this study assessed the utility of the Technology Acceptance Model (TAM), the Theory of Planned Behavior (TPB), and the Unified Theory of Acceptance and Use of Technology (UTAUT) for modelling driver acceptance in terms of Behavioral Intention to use an ADAS. Each of these models propose a set of factors that influence acceptance of a technology. Data collection was done using two approaches: a driving simulator approach and an online survey approach. In both approaches, participants interacted with either a fatigue monitoring system or an adaptive cruise control system combined with a lane-keeping system. Based on their experience, participants responded to several survey questions to indicate their attitude toward using the ADAS and their perception of its usefulness, usability, etc. A sample of 430 surveys were collected for this study. Results found that all the models (TAM, TPB, and UTAUT) can explain driver acceptance with their proposed sets of factors, each explaining 71% or more of the variability in Behavioral Intention. Among the models, TAM was found to perform the best in modelling driver acceptance followed by TPB. The findings of this study confirm that these models can be applied to ADAS technologies and that they provide a basis for understanding driver acceptance. Copyright © 2017 Elsevier Ltd. All rights reserved.

Aircraft digital control design methods

NASA Technical Reports Server (NTRS)

Powell, J. D.; Parsons, E.; Tashker, M. G.

1976-01-01

Variations in design methods for aircraft digital flight control are evaluated and compared. The methods fall into two categories; those where the design is done in the continuous domain (or s plane) and those where the design is done in the discrete domain (or z plane). Design method fidelity is evaluated by examining closed loop root movement and the frequency response of the discretely controlled continuous aircraft. It was found that all methods provided acceptable performance for sample rates greater than 10 cps except the uncompensated s plane design method which was acceptable above 20 cps. A design procedure based on optimal control methods was proposed that provided the best fidelity at very slow sample rates and required no design iterations for changing sample rates.

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: ECR TECHNOLOGIES, INC., EARTHLINKED GROUND-SOURCE HEAT PUMP WATER HEATING SYSTEM

EPA Science Inventory

EPA has created the Environmental Technology Verification program to provide high quality, peer reviewed data on technology performance. This data is expected to accelerate the acceptance and use of improved environmental protection technologies. The Greenhouse Gas Technology C...

Evaluating Nurses Acceptance of Hospital Information Systems: A Case Study of a Tertiary Care Hospital.

PubMed

Khalifa, Mohamed

2016-01-01

This study aims at evaluating hospital information systems (HIS) acceptance factors among nurses, in order to provide suggestions for successful HIS implementation. The study used mainly quantitative survey methods to collect data directly from nurses through a questionnaire. The availability of computers in the hospital was one of the most influential factors, with a special emphasis on the unavailability of laptop computers and computers on wheels to facilitate immediate data entry and retrieval when nurses are at the point of care. Nurses believed that HIS might frequently slow down the process of care delivery and increase the time spent by patients inside the hospital especially during slow performance and responsiveness phases. Recommendations were classified into three main areas; improving system performance and availability of computers in the hospital, increasing organizational support in the form of providing training and protected time for nurses' to learn and enhancing users' feedback by listening to their complaints and considering their suggestions.

Flight Hydrogen Sensor for use in the ISS Oxygen Generation Assembly

NASA Technical Reports Server (NTRS)

MSadoques, George, Jr.; Makel, Darby B.

2005-01-01

This paper provides a description of the hydrogen sensor Orbital Replacement Unit (ORU) used on the Oxygen Generation Assembly (OGA), to be operated on the International Space Station (ISS). The hydrogen sensor ORU is being provided by Makel Engineering, Inc. (MEI) to monitor the oxygen outlet for the presence of hydrogen. The hydrogen sensor ORU is a triple redundant design where each sensor converts raw measurements to actual hydrogen partial pressure that is reported to the OGA system controller. The signal outputs are utilized for system shutdown in the event that the hydrogen concentration in the oxygen outlet line exceeds the specified shutdown limit. Improvements have been made to the Micro-Electro-Mechanical Systems (MEMS) based sensing element, screening, and calibration process to meet OGA operating requirements. Two flight hydrogen sensor ORUs have successfully completed the acceptance test phase. This paper also describes the sensor s performance during acceptance testing, additional tests planned to extend the operational performance calibration cycle, and integration with the OGA system.

The relationship of state Medicaid coverage to Medicaid acceptance among substance abuse providers in the United States.

PubMed

Andrews, Christina M

2014-10-01

The Affordable Care Act will dramatically increase the number of Americans with Medicaid coverage for substance abuse treatment (SAT). Currently, few SAT providers accept Medicaid, and consequently, there is concern that newly-eligible Medicaid enrollees will have difficulty finding SAT providers willing to serve them. However, little is known about why few SAT providers accept Medicaid. In response, this study examines how features of state Medicaid coverage for SAT, including benefits, eligibility, and oversight, are associated with Medicaid acceptance among SAT providers. Medicaid acceptance was positively associated with the number of SAT services covered, and the number of optional categorical expansions implemented by the state. Requirements for physician involvement were associated with lower odds of acceptance. The results suggest that more generous Medicaid coverage may encourage SAT providers to accept Medicaid, but regulatory policies may inhibit their ability to do so.

Survey of the prevalence and methodology of quality assurance for B-mode ultrasound image quality among veterinary sonographers.

PubMed

Hoscheit, Larry P; Heng, Hock Gan; Lim, Chee Kin; Weng, Hsin-Yi

2018-05-01

Image quality in B-mode ultrasound is important as it reflects the diagnostic accuracy and diagnostic information provided during clinical scanning. Quality assurance programs for B-mode ultrasound systems/components are comprised of initial quality acceptance testing and subsequent regularly scheduled quality control testing. The importance of quality assurance programs for B-mode ultrasound image quality using ultrasound phantoms is well documented in the human medical and medical physics literature. The purpose of this prospective, cross-sectional, survey study was to determine the prevalence and methodology of quality acceptance testing and quality control testing of image quality for ultrasound system/components among veterinary sonographers. An online electronic survey was sent to 1497 members of veterinary imaging organizations: the American College of Veterinary Radiology, the Veterinary Ultrasound Society, and the European Association of Veterinary Diagnostic Imaging, and a total of 167 responses were received. The results showed that the percentages of veterinary sonographers performing quality acceptance testing and quality control testing are 42% (64/151; 95% confidence interval 34-52%) and 26% (40/156: 95% confidence interval 19-33%) respectively. Of the respondents who claimed to have quality acceptance testing or quality control testing of image quality in place for their ultrasound system/components, 0% have performed quality acceptance testing or quality control testing correctly (quality acceptance testing 95% confidence interval: 0-6%, quality control testing 95% confidence interval: 0-11%). Further education and guidelines are recommended for veterinary sonographers in the area of quality acceptance testing and quality control testing for B-mode ultrasound equipment/components. © 2018 American College of Veterinary Radiology.

Simulator study of the effect of visual-motion time delays on pilot tracking performance with an audio side task

NASA Technical Reports Server (NTRS)

Riley, D. R.; Miller, G. K., Jr.

1978-01-01

The effect of time delay was determined in the visual and motion cues in a flight simulator on pilot performance in tracking a target aircraft that was oscillating sinusoidally in altitude only. An audio side task was used to assure the subject was fully occupied at all times. The results indicate that, within the test grid employed, about the same acceptable time delay (250 msec) was obtained for a single aircraft (fighter type) by each of two subjects for both fixed-base and motion-base conditions. Acceptable time delay is defined as the largest amount of delay that can be inserted simultaneously into the visual and motion cues before performance degradation occurs. A statistical analysis of the data was made to establish this value of time delay. Audio side task provided quantitative data that documented the subject's work level.

Skylab extravehicular mobility unit thermal simulator

NASA Technical Reports Server (NTRS)

Hixon, C. W.; Phillips, M. A.

1974-01-01

The analytical methods, thermal model, and user's instructions for the Skylab Extravehicular Mobility Unit (SEMU) routine are presented. This digital computer program was developed for detailed thermal performance predictions of the SEMU on the NASA-JSC Univac 1108 computer system. It accounts for conductive, convective, and radiant heat transfer as well as fluid flow and special component characterization. The program provides thermal performance predictions for a 967 node thermal model in one thirty-sixth (1/36) of mission time when operated at a calculating interval of three minutes (mission time). The program has the operational flexibility to: (1) accept card or magnetic tape data input for the thermal model describing the SEMU structure, fluid systems, crewman and component performance, (2) accept card and/or magnetic tape input of internally generated heat and heat influx from the space environment, and (3) output tabular or plotted histories of temperature, flow rates, and other parameters describing system operating modes.

Commercial grade item (CGI) dedication of generators for nuclear safety related applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, R.K.; Hajos, L.G.

1993-03-01

The number of nuclear safety related equipment suppliers and the availability of spare and replacement parts designed specifically for nuclear safety related application are shrinking rapidly. These have made it necessary for utilities to apply commercial grade spare and replacement parts in nuclear safety related applications after implementing proper acceptance and dedication process to verify that such items conform with the requirements of their use in nuclear safety related application. The general guidelines for the commercial grade item (CGI) acceptance and dedication are provided in US Nuclear Regulatory Commission (NRC) Generic Letters and Electric Power Research Institute (EPRI) Report NP-5652,more » Guideline for the Utilization of Commercial Grade Items in Nuclear Safety Related Applications. This paper presents an application of these generic guidelines for procurement, acceptance, and dedication of a commercial grade generator for use as a standby generator at Salem Generating Station Units 1 and 2. The paper identifies the critical characteristics of the generator which once verified, will provide reasonable assurance that the generator will perform its intended safety function. The paper also delineates the method of verification of the critical characteristics through tests and provide acceptance criteria for the test results. The methodology presented in this paper may be used as specific guidelines for reliable and cost effective procurement and dedication of commercial grade generators for use as standby generators at nuclear power plants.« less

Assessing new patient access to mental health providers in HMO networks.

PubMed

Barry, Colleen L; Venkatesh, Mohini; Busch, Susan H

2008-12-01

This study examined access to mental health providers in health maintenance organization (HMO) networks. A telephone survey was conducted with a stratified random sample of mental health providers listed as being in a network for at lease one of six HMOs operating in Connecticut (response rate=72%; N=366). Data were collected between December 2006 and March 2007. Measures included the accuracy of network listings, acceptance rates of new patients, and reasons for not accepting new patients. Acceptance of new patients was defined as scheduling an appointment within two weeks from the time of the initial contact. Logistic regression was used to examine acceptance rates of new patients while controlling for type of provider (social worker, nurse, psychologist, or psychiatrist) and practice characteristics. Findings indicate that 17% of sampled HMO network listings were inaccurate. Among the providers with an accurate listing, 73% were accepting new HMO patients and 76% were accepting new self-pay patients. These aggregate acceptance rates of new patients mask differences among providers, with psychiatrists significantly less likely than other providers to accept new patients (55% of psychiatrists were accepting new patients). The most common reason for not accepting new patients was the lack of available appointments. Results indicate that access to mental health providers in HMO networks varied by type of provider. For HMO enrollees seeking treatment for mental health problems from a provider with a master's degree in social work (M.S.W. degree), network access was not a major problem. Scheduling an appointment with a psychiatrist, particularly a psychiatrist treating children only, was more difficult.

Acceptance of Treatment of Sexually Transmitted Infections for Stable Sexual Partners by Female Sex Workers in Kampala, Uganda

PubMed Central

Mayanja, Yunia; Mukose, Aggrey David; Nakubulwa, Susan; Omosa-Manyonyi, Gloria

2016-01-01

Background The prevalence of sexually transmitted infections (STIs) among female sex workers (FSWs) in sub-Saharan Africa remains high. Providing treatment to the affected FSWs is a challenge, and more so to their stable sexual partners. There is scanty research information on acceptance of STI treatment for stable sexual partners by FSWs. We conducted a study to assess acceptance of STI treatment for stable sexual partners by FSWs, and to identify factors associated with acceptance. Methods We enrolled 241 FSWs in a cross sectional study; they were aged ≥ 18 years, had a stable sexual partner and a diagnosis of STI. Factors associated with acceptance of STI treatment for stable sexual partners were analysed in STATA (12) using Poisson regression. Mantel-Haenszel tests for interaction were performed. Results Acceptance of partner treatment was 50.6%. Majority (83.8%) of partners at the last sexual act were stable partners, and 32.4% of participants had asymptomatic STIs. Factors independently associated with acceptance were: earning ≤ $4 USD per sexual act (aPR 0.68; 95% CI: 0.49–0.94) and a clinical STI diagnosis (aPR 1.95; 95% CI: 1.30–2.92). The effect of low income on acceptance of partner treatment was seen in those with less education. Conclusion Acceptance of STI treatment for stable sexual partners was lower than that seen in other studies. Interventions to improve economic empowerment among FSWs may increase acceptance of partner treatment. PMID:27171270

A Primer on Building Teacher Evaluation Instruments.

ERIC Educational Resources Information Center

Bitner, Ted; Kratzner, Ron

This paper presents a primer on building a scientifically oriented teacher evaluation instrument. It stresses the importance of accurate measures and accepts the presupposition that scientific approaches provide the most accurate measures of student teacher performance. The paper discusses the scientific concepts of validity and reliability, and…

Use of Empirical Estimates of Shrinkage in Multiple Regression: A Caution.

ERIC Educational Resources Information Center

Kromrey, Jeffrey D.; Hines, Constance V.

1995-01-01

The accuracy of four empirical techniques to estimate shrinkage in multiple regression was studied through Monte Carlo simulation. None of the techniques provided unbiased estimates of the population squared multiple correlation coefficient, but the normalized jackknife and bootstrap techniques demonstrated marginally acceptable performance with…

A Program of Behavioral Objectives for the Students.

ERIC Educational Resources Information Center

McDowell, Thomas, Comp.; Sharbaugh, Marilyn, Comp.

Provided is a program of behavioral objectives for use with speech handicapped preschool and elementary level children in the areas of articulation disorders, language disorders, stuttering, tongue thrust, and voice. Communication disorders are defined as substandard behaviors which interfere with the student's ability to perform acceptably for…

Psychophysically determined forces of dynamic pushing for female industrial workers: Comparison of two apparatuses.

PubMed

Ciriello, Vincent M; Maikala, Rammohan V; Dempsey, Patrick G; O'Brien, Niall V

2010-01-01

Using psychophysics, the maximum acceptable forces for pushing have been previously developed using a magnetic particle brake (MPB) treadmill at the Liberty Mutual Research Institute for Safety. The objective of this study was to investigate the reproducibility of maximum acceptable initial and sustained forces while performing a pushing task at a frequency of 1min(-1) both on a MPB treadmill and on a high-inertia pushcart. This is important because our pushing guidelines are used extensively as a ergonomic redesign strategy and we would like the information to be as applicable as possible to cart pushing. On two separate days, nineteen female industrial workers performed a 40-min MPB treadmill pushing task and a 2-hr pushcart task, in the context of a larger experiment. During pushing, the subjects were asked to select a workload they could sustain for 8h without "straining themselves or without becoming unusually tired, weakened, overheated or out of breath." The results demonstrated that maximum acceptable initial and sustained forces of pushing determined on the high inertia pushcart were 0.8% and 2.5% lower than the MPB treadmill. The results also show that the maximum acceptable sustained force of the MPB treadmill task was 0.5% higher than the maximum acceptable sustained force of Snook and Ciriello (1991). Overall, the findings confirm that the existing pushing data developed by the Liberty Mutual Research Institute for Safety still provides an accurate estimate of maximal acceptable forces for the selected combination of distance and frequency of push for female industrial workers.

Universal HIV Screening at Postnatal Points of Care: Which Public Health Approach for Early Infant Diagnosis in Côte d'Ivoire?

PubMed Central

Ndondoki, Camille; Brou, Hermann; Timite-Konan, Marguerite; Oga, Maxime; Amani-Bosse, Clarisse; Menan, Hervé; Ekouévi, Didier; Leroy, Valériane

2013-01-01

Background Universal HIV pediatric screening offered at postnatal points of care (PPOC) is an entry point for early infant diagnosis (EID). We assessed the parents' acceptability of this approach in Abidjan, Côte d'Ivoire. Methods In this cross-sectional study, trained counselors offered systematic HIV screening to all children aged 6–26 weeks attending PPOC in three community health centers with existing access to HAART during 2008, as well as their parents/caregivers. HIV-testing acceptability was measured for parents and children; rapid HIV tests were used for parents. Both parents' consent was required according to the Ivorian Ethical Committee to perform a HIV test on HIV-exposed children. Free HIV care was offered to those who were diagnosed HIV-infected. Findings We provided 3,013 HIV tests for infants and their 2,986 mothers. While 1,731 mothers (58%) accepted the principle of EID, only 447 infants had formal parental consent 15%; 95% confidence interval (CI): [14%–16%]. Overall, 1,817 mothers (61%) accepted to test for HIV, of whom 81 were HIV-infected (4.5%; 95% CI: [3.5%–5.4%]). Among the 81 HIV-exposed children, 42 (52%) had provided parental consent and were tested: five were HIV-infected (11.9%; 95% CI: [2.1%–21.7%]). Only 46 fathers (2%) came to diagnose their child. Parental acceptance of EID was strongly correlated with prenatal self-reported HIV status: HIV-infected mothers were six times more likely to provide EID parental acceptance than mothers reporting unknown or negative prenatal HIV status (aOR: 5.9; 95% CI: [3.3–10.6], p = 0.0001). Conclusions Although the principle of EID was moderately accepted by mothers, fathers' acceptance rate remained very low. Routine HIV screening of all infants was inefficient for EID at a community level in Abidjan in 2008. Our results suggest the need of focusing on increasing the PMTCT coverage, involving fathers and tracing children issued from PMTCT programs in low HIV prevalence countries. PMID:23990870

Boosting Quality Registries with Clinical Decision Support Functionality*. User Acceptance of a Prototype Applied to HIV/TB Drug Therapy.

PubMed

Wannheden, Carolina; Hvitfeldt-Forsberg, Helena; Eftimovska, Elena; Westling, Katarina; Ellenius, Johan

2017-08-11

The care of HIV-related tuberculosis (HIV/TB) is complex and challenging. Clinical decision support (CDS) systems can contribute to improve quality of care, but more knowledge is needed on factors determining user acceptance of CDS. To analyze physicians' and nurses' acceptance of a CDS prototype for evidence-based drug therapy recommendations for HIV/TB treatment. Physicians and nurses were involved in designing a CDS prototype intended for future integration with the Swedish national HIV quality registry. Focus group evaluation was performed with ten nurses and four physicians, respectively. The Unified Theory of Acceptance and Use of Technology (UTAUT) was used to analyze acceptance. We identified several potential benefits with the CDS prototype as well as some concerns that could be addressed by redesign. There was also concern about dependence on physician attitudes, as well as technical, organizational, and legal issues. Acceptance evaluation at a prototype stage provided rich data to improve the future design of a CDS prototype. Apart from design and development efforts, substantial organizational efforts are needed to enable the implementation and maintenance of a future CDS system.

Measure Guideline: Internal Insulation of Masonry Walls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Straube, J. F.; Ueno, K.; Schumacher, C. J.

2012-07-01

This measure guideline provides recommendations for interior insulation assemblies that control interstitial condensation and durability risks; recommendations for acceptable thermal performance are also provided. An illustrated guide of high-risk exterior details (which concentrate bulk water), and recommended remediation details is provided. This is followed by a recommended methodology for risk assessment of a masonry interior insulation project: a series of steps are suggested to assess the risks associated with this retrofit, with greater certainty with added steps.

Measure Guideline. Internal Insulation of Masonry Walls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Straube, J. F.; Ueno, K.; Schumacher, C. J.

2012-07-01

This measure guideline provides recommendations for interior insulation assemblies that control interstitial condensation and durability risks; recommendations for acceptable thermal performance are also provided. An illustrated guide of high-risk exterior details (which concentrate bulk water), and recommended remediation details is provided. This is followed by a recommended methodology for risk assessment of a masonry interior insulation project: a series of steps are suggested to assess the risks associated with this retrofit, with greater certainty with added steps.

Self-efficacy and pain acceptance as mediators of the relationship between pain and performance of valued life activities in women and men with rheumatoid arthritis.

PubMed

Ahlstrand, Inger; Vaz, Sharmila; Falkmer, Torbjörn; Thyberg, Ingrid; Björk, Mathilda

2017-06-01

To study whether personal factors (self-efficacy and pain acceptance) mediate the relationship between pain and performance of valued life activities in persons with rheumatoid arthritis. Persons with rheumatoid arthritis for at least four years ( n = 737; 73% women) answered a questionnaire measuring self-efficacy, pain acceptance, performance of valued life activities, and self-rated pain. Relationships among these constructs were explored using univariate and multivariate analyses. Structural equation modelling was then used to examine the mediational role of personal factors on the relationship between pain and performance of valued life activities. A direct negative association between pain and performance of valued life activities was identified ( Beta = .34, P < .001). This suggests that people with rheumatoid arthritis who had higher levels of pain has increased difficulties in performing valued life activities. Self-efficacy and activity engagement component of pain acceptance mediated the relationship between pain and performance of valued life activities, however the pain willingness component of pain acceptance did not influence participation in valued life activities. These findings highlight the importance of considering personal factors, such as pain acceptance and self-efficacy, in facilitating participation in valued life activities.

Sports medicine: performance-enhancing drugs.

PubMed

Gregory, Andrew J M; Fitch, Robert W

2007-08-01

Performance-enhancing drugs, ergogenic aids, or sports supplements have been a part of sports since sporting competition began and likely always will be. Considered cheating by purists and necessary by some athletes, we must accept the fact that they are used, understand why they are used, and study how to prevent their use to institute change. This article summarizes current information regarding the use of performance-enhancing drugs in young athletes and provides proven prevention strategies for instituting a program in your local schools.

Utilization of Multimedia Laboratory: An Acceptance Analysis using TAM

NASA Astrophysics Data System (ADS)

Modeong, M.; Palilingan, V. R.

2018-02-01

Multimedia is often utilized by teachers to present a learning materials. Learning that delivered by multimedia enables people to understand the information of up to 60% of the learning in general. To applying the creative learning to the classroom, multimedia presentation needs a laboratory as a space that provides multimedia needs. This study aims to reveal the level of student acceptance on the multimedia laboratories, by explaining the direct and indirect effect of internal support and technology infrastructure. Technology Acceptance Model (TAM) is used as the basis of measurement on this research, through the perception of usefulness, ease of use, and the intention, it’s recognized capable of predicting user acceptance about technology. This study used the quantitative method. The data analysis using path analysis that focuses on trimming models, it’s performed to improve the model of path analysis structure by removing exogenous variables that have insignificant path coefficients. The result stated that Internal Support and Technology Infrastructure are well mediated by TAM variables to measure the level of technology acceptance. The implications suggest that TAM can measure the success of multimedia laboratory utilization in Faculty of Engineering UNIMA.

Investigating the adaptive model of thermal comfort for naturally ventilated school buildings in Taiwan.

PubMed

Hwang, Ruey-Lung; Lin, Tzu-Ping; Chen, Chen-Peng; Kuo, Nai-Jung

2009-03-01

Divergence in the acceptability to people in different regions of naturally ventilated thermal environments raises a concern over the extent to which the ASHRAE Standard 55 may be applied as a universal criterion of thermal comfort. In this study, the ASHRAE 55 adaptive model of thermal comfort was investigated for its applicability to a hot and humid climate through a long-term field survey performed in central Taiwan among local students attending 14 elementary and high schools during September to January. Adaptive behaviors, thermal neutrality, and thermal comfort zones are explored. A probit analysis of thermal acceptability responses from students was performed in place of the conventional linear regression of thermal sensation votes against operative temperature to investigate the limits of comfort zones for 90% and 80% acceptability; the corresponding comfort zones were found to occur at 20.1-28.4 degrees C and 17.6-30.0 degrees C, respectively. In comparison with the yearly comfort zones recommended by the adaptive model for naturally ventilated spaces in the ASHRAE Standard 55, those observed in this study differ in the lower limit for 80% acceptability, with the observed level being 1.7 degrees C lower than the ASHRAE-recommended value. These findings can be generalized to the population of school children, thus providing information that can supplement ASHRAE Standard 55 in evaluating the thermal performance of naturally ventilated school buildings, particularly in hot-humid areas such as Taiwan.

Investigating the adaptive model of thermal comfort for naturally ventilated school buildings in Taiwan

NASA Astrophysics Data System (ADS)

Hwang, Ruey-Lung; Lin, Tzu-Ping; Chen, Chen-Peng; Kuo, Nai-Jung

2009-03-01

Divergence in the acceptability to people in different regions of naturally ventilated thermal environments raises a concern over the extent to which the ASHRAE Standard 55 may be applied as a universal criterion of thermal comfort. In this study, the ASHRAE 55 adaptive model of thermal comfort was investigated for its applicability to a hot and humid climate through a long-term field survey performed in central Taiwan among local students attending 14 elementary and high schools during September to January. Adaptive behaviors, thermal neutrality, and thermal comfort zones are explored. A probit analysis of thermal acceptability responses from students was performed in place of the conventional linear regression of thermal sensation votes against operative temperature to investigate the limits of comfort zones for 90% and 80% acceptability; the corresponding comfort zones were found to occur at 20.1-28.4°C and 17.6-30.0°C, respectively. In comparison with the yearly comfort zones recommended by the adaptive model for naturally ventilated spaces in the ASHRAE Standard 55, those observed in this study differ in the lower limit for 80% acceptability, with the observed level being 1.7°C lower than the ASHRAE-recommended value. These findings can be generalized to the population of school children, thus providing information that can supplement ASHRAE Standard 55 in evaluating the thermal performance of naturally ventilated school buildings, particularly in hot-humid areas such as Taiwan.

Cluster 1: commercializing additive manufacturing—hurdles in materials characterization and testing

DOE PAGES

Roach, R. A.; Gardner, S. H.

2017-10-20

A major challenge in the commercialization of additive manufactured (AM) materials and processes is the ability to achieve acceptance of processes and products. There has been some progress towards acceptance has been made by adapting legacy qualification paradigms to match with the very limited process control and monitoring offered by AM machines. The opportunity for in-situ measurement can provide process monitoring and control perhaps changing the way we qualify parts however it is limited by lack of adequate process measurement methods. New measurement techniques, sensors and correlations to relevant phenomena are needed that enable process control and monitoring for consistentlymore » producing high quality articles. Beyond process data we need to characterize uncertainties of performance in all aspects of material, process and final part. These are prerequisites to achieving articles that are indeed worthy of materials characterization efforts that establish a microstructural reference of desirable performance through process-structure-property relations. Only then can industry apply physics based understanding of the material, part and process to probabilistically predict performance of an AM part. Our paper provides a brief overview, discussion of hurdles and key areas where R&D investment is needed.« less

Cluster 1: commercializing additive manufacturing—hurdles in materials characterization and testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roach, R. A.; Gardner, S. H.

A major challenge in the commercialization of additive manufactured (AM) materials and processes is the ability to achieve acceptance of processes and products. There has been some progress towards acceptance has been made by adapting legacy qualification paradigms to match with the very limited process control and monitoring offered by AM machines. The opportunity for in-situ measurement can provide process monitoring and control perhaps changing the way we qualify parts however it is limited by lack of adequate process measurement methods. New measurement techniques, sensors and correlations to relevant phenomena are needed that enable process control and monitoring for consistentlymore » producing high quality articles. Beyond process data we need to characterize uncertainties of performance in all aspects of material, process and final part. These are prerequisites to achieving articles that are indeed worthy of materials characterization efforts that establish a microstructural reference of desirable performance through process-structure-property relations. Only then can industry apply physics based understanding of the material, part and process to probabilistically predict performance of an AM part. Our paper provides a brief overview, discussion of hurdles and key areas where R&D investment is needed.« less

Method for Improving Separation of Carbohydrates from Wood Pulping Liquors and Wood or Biomass Hydrolysis Liquors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Compere, A L; Marcoccia, B S; Elliott, J

2012-08-31

Work with industrial partners to perform the studies needed to commercialize U.S. patent 7,699,958 for separation of carbohydrates from wood pulping liquors and wood or biomass hydrolysis liquors. These include: 1) selection of the best pulp mill liquor withdrawal sites, 2) additional purification or enzyme hydrolysis required to obtain acceptable sugar feedstocks, 3) and work with partners to optimize the stream and purification methods to provide acceptable feedstocks for algal fuels and industrial chemicals production, and 4) preparation of samples large enough for testing by downstream partners.

46 CFR 160.133-7 - Design, construction, and performance of release mechanisms.

Code of Federal Regulations, 2012 CFR

2012-10-01

... subpart). All steel products, except corrosion resistant steel, must be galvanized to provide high-quality...; (3) Steel. Each major structural component of each release mechanism must be constructed of steel. Other materials may be used if accepted by the Commandant as equivalent or superior. Sheet steel and...

46 CFR 160.133-7 - Design, construction, and performance of release mechanisms.

Code of Federal Regulations, 2013 CFR

2013-10-01

... subpart). All steel products, except corrosion resistant steel, must be galvanized to provide high-quality...; (3) Steel. Each major structural component of each release mechanism must be constructed of steel. Other materials may be used if accepted by the Commandant as equivalent or superior. Sheet steel and...

Supersonic propulsion technology. [variable cycle engines

NASA Technical Reports Server (NTRS)

Powers, A. G.; Coltrin, R. E.; Stitt, L. E.; Weber, R. J.; Whitlow, J. B., Jr.

1979-01-01

Propulsion concepts for commercial supersonic transports are discussed. It is concluded that variable cycle engines, together with advanced supersonic inlets and low noise coannular nozzles, provide good operating performance for both supersonic and subsonic flight. In addition, they are reasonably quiet during takeoff and landing and have acceptable exhaust emissions.

46 CFR 11.309 - Coast Guard-accepted training other than approved courses.

Code of Federal Regulations, 2010 CFR

2010-10-01

... training or providing instruction; (iv) The identification of other media or facilities to be used in... objectives. (4) Neither a specialist in a particular field of nonmaritime education, such as mathematics or... practice in performing required skills. (7) A process for routinely assessing the effectiveness of the...

Work zone simulator analysis : driver performance and acceptance of Missouri alternate lane shift configurations.

DOT National Transportation Integrated Search

2017-01-13

The objective of this project is to evaluate MoDOTs alternate lane shift sign configuration for work zones. The single sign proposed by MoDOT provides the traveler with enough information to let them know that all lanes are available to shift arou...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, TEST REPORT OF MOBILE SOURCE EMISSION CONTROL DEVICES: MITSUI ENGINEERING & SHIPBUILDING DIESEL PARTICULATE FILTER

EPA Science Inventory

EPA‘s Environmental Technology Verification program is designed to further environmental protection by accelerating the acceptance and use of improved and cost effective technologies. This is done by providing high-quality, peer reviewed data on technology performance to those in...

Chapter 8: Fire Performance of Cross-Laminated Timber Assemblies (2012 US Edition)

Treesearch

Christian Dagenais; Robert H. White; Kuma Sumathipala

2012-01-01

Cross-laminated timber (CLT) is a promising wood-based structural component and has potential to provide cost-effective building solutions for residential, commercial and institutional buildings as well as large industrial facilities. Market acceptance of CLT requires that it meets the applicable building code requirements.

Verification test report on a solar heating and hot water system

NASA Technical Reports Server (NTRS)

1978-01-01

Information is provided on the development, qualification and acceptance verification of commercial solar heating and hot water systems and components. The verification includes the performances, the efficiences and the various methods used, such as similarity, analysis, inspection, test, etc., that are applicable to satisfying the verification requirements.

7 CFR 17.4 - Agents of the participant or importer.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Administrator, Export Credits, FAS, along with a copy of the proposed agreement between the participant or..., Export Credits, FAS, has provided a written statement that the nomination is accepted in accordance with... perform functions of a shipping agent, shall furnish to the Deputy Administrator, Export Credits, FAS, the...

7 CFR 17.4 - Agents of the participant or importer.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Administrator, Export Credits, FAS, along with a copy of the proposed agreement between the participant or..., Export Credits, FAS, has provided a written statement that the nomination is accepted in accordance with... perform functions of a shipping agent, shall furnish to the Deputy Administrator, Export Credits, FAS, the...

7 CFR 17.4 - Agents of the participant or importer.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Administrator, Export Credits, FAS, along with a copy of the proposed agreement between the participant or..., Export Credits, FAS, has provided a written statement that the nomination is accepted in accordance with... perform functions of a shipping agent, shall furnish to the Deputy Administrator, Export Credits, FAS, the...

7 CFR 17.4 - Agents of the participant or importer.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Administrator, Export Credits, FAS, along with a copy of the proposed agreement between the participant or..., Export Credits, FAS, has provided a written statement that the nomination is accepted in accordance with... perform functions of a shipping agent, shall furnish to the Deputy Administrator, Export Credits, FAS, the...

7 CFR 17.4 - Agents of the participant or importer.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Administrator, Export Credits, FAS, along with a copy of the proposed agreement between the participant or..., Export Credits, FAS, has provided a written statement that the nomination is accepted in accordance with... perform functions of a shipping agent, shall furnish to the Deputy Administrator, Export Credits, FAS, the...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION ...

EPA Pesticide Factsheets

There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented performance and cost data obtained from field demonstrations.

Systems for hybrid cars

NASA Astrophysics Data System (ADS)

Bitsche, Otmar; Gutmann, Guenter

Not only sharp competition but also legislation are pushing development of hybrid drive trains. Based on conventional internal combustion engine (ICE) vehicles, these drive trains offer a wide range of benefits from reduced fuel consumption and emission to multifaceted performance improvements. Hybrid electric drive trains may also facilitate the introduction of fuel cells (FC). The battery is the key component for all hybrid drive trains, as it dominates cost and performance issues. The selection of the right battery technology for the specific automotive application is an important task with an impact on costs of development and use. Safety, power, and high cycle life are a must for all hybrid applications. The greatest pressure to reduce cost is in soft hybrids, where lead-acid embedded in a considerate management presents the cheapest solution, with a considerable improvement in performance needed. From mild to full hybridization, an improvement in specific power makes higher costs more acceptable, provided that the battery's service life is equivalent to the vehicle's lifetime. Today, this is proven for the nickel-metal hydride system. Lithium ion batteries, which make use of a multiple safety concept, and with some development anticipated, provide even better prospects in terms of performance and costs. Also, their scalability permits their application in battery electric vehicles—the basis for better performance and enhanced user acceptance. Development targets for the batteries are discussed with a focus on system aspects such as electrical and thermal management and safety.

Low Noise Exhaust Nozzle Technology Development

NASA Technical Reports Server (NTRS)

Majjigi, R. K.; Balan, C.; Mengle, V.; Brausch, J. F.; Shin, H.; Askew, J. W.

2005-01-01

NASA and the U.S. aerospace industry have been assessing the economic viability and environmental acceptability of a second-generation supersonic civil transport, or High Speed Civil Transport (HSCT). Development of a propulsion system that satisfies strict airport noise regulations and provides high levels of cruise and transonic performance with adequate takeoff performance, at an acceptable weight, is critical to the success of any HSCT program. The principal objectives were to: 1. Develop a preliminary design of an innovative 2-D exhaust nozzle with the goal of meeting FAR36 Stage III noise levels and providing high levels of cruise performance with a high specific thrust for Mach 2.4 HSCT with a range of 5000 nmi and a payload of 51,900 lbm, 2. Employ advanced acoustic and aerodynamic codes during preliminary design, 3. Develop a comprehensive acoustic and aerodynamic database through scale-model testing of low-noise, high-performance, 2-D nozzle configurations, based on the preliminary design, and 4. Verify acoustic and aerodynamic predictions by means of scale-model testing. The results were: 1. The preliminary design of a 2-D, convergent/divergent suppressor ejector nozzle for a variable-cycle engine powered, Mach 2.4 HSCT was evolved, 2. Noise goals were predicted to be achievable for three takeoff scenarios, and 3. Impact of noise suppression, nozzle aerodynamic performance, and nozzle weight on HSCT takeoff gross weight were assessed.

The NEEDS Data Base Management and Archival Mass Memory System

NASA Technical Reports Server (NTRS)

Bailey, G. A.; Bryant, S. B.; Thomas, D. T.; Wagnon, F. W.

1980-01-01

A Data Base Management System and an Archival Mass Memory System are being developed that will have a 10 to the 12th bit on-line and a 10 to the 13th off-line storage capacity. The integrated system will accept packetized data from the data staging area at 50 Mbps, create a comprehensive directory, provide for file management, record the data, perform error detection and correction, accept user requests, retrieve the requested data files and provide the data to multiple users at a combined rate of 50 Mbps. Stored and replicated data files will have a bit error rate of less than 10 to the -9th even after ten years of storage. The integrated system will be demonstrated to prove the technology late in 1981.

Experimental investigation on performance and exhaust emissions of castor oil biodiesel from a diesel engine.

PubMed

Shojaeefard, M H; Etgahni, M M; Meisami, F; Barari, A

2013-01-01

Biodiesel, produced from plant and animal oils, is an important alternative to fossil fuels because, apart from dwindling supply, the latter are a major source of air pollution. In this investigation, effects of castor oil biodiesel blends have been examined on diesel engine performance and emissions. After producing castor methyl ester by the transesterification method and measuring its characteristics, the experiments were performed on a four cylinder, turbocharged, direct injection, diesel engine. Engine performance (power, torque, brake specific fuel consumption and thermal efficiency) and exhaust emissions were analysed at various engine speeds. All the tests were done under 75% full load. Furthermore, the volumetric blending ratios of biodiesel with conventional diesel fuel were set at 5, 10, 15, 20 and 30%. The results indicate that lower blends of biodiesel provide acceptable engine performance and even improve it. Meanwhile, exhaust emissions are much decreased. Finally, a 15% blend of castor oil-biodiesel was picked as the optimized blend of biodiesel-diesel. It was found that lower blends of castor biodiesel are an acceptable fuel alternative for the engine.

International Ultraviolet Explorer (IUE) Battery History and Performance

NASA Technical Reports Server (NTRS)

Rao, Gopalskrishna M.; Tiller, Smith E.

1999-01-01

The "International Ultraviolet Explorer (IUE) Battery History and Performance" report provides the information on the cell/battery design, battery performance during the thirty eight (38) solar eclipse seasons and the end-of-life test data. It is noteworthy that IUE spacecraft was an in-house project and that the batteries were designed, fabricated and tested (Qualification and Acceptance) at the Goddard Space Flight Center. A detailed information is given on the cell and battery design criteria and the designs, on the Qualification and the Acceptance tests, and on the cell life cycling tests. The environmental, thermal, and vibration tests were performed on the batteries at the battery level as well as with the interface on the spacecraft. The telemetry data were acquired, analyzed, and trended for various parameters over the mission life. Rigorous and diligent battery management programs were developed and implemented from time to time to extend the mission life over eighteen plus years. Prior to the termination of spacecraft operation, special tests were conducted to check the battery switching operation, battery residual capacity, third electrode performance and battery impedance.

GEOSAT Follow-On (GFO) Altimeter Document Series, Volume 9. GFO and JASON Altimeter Engineering Assessment Report Update: GFO-Acceptance to December 18, 2006, JASON-Acceptance to December 24, 2006. Version 1: June 2007

NASA Technical Reports Server (NTRS)

Hayne, G. S.; Hancock, D. W., III; Brooks, R. L.

2007-01-01

The initial GFO Altimeter Engineering Assessment Report, March 2001 (NASA/TM-2001-209984/Ver.1/Vol.1) covered the GFO performance from Launch to Acceptance (10 February 1998 to 29 November 2000). The second of the series covered the performance from Acceptance to the end of Cycle 20 (29 November 2000 to 21 November 2001). The third of the series covered the performance from Acceptance to the end of Cycle 42 (29 November 2000 to 30 November 2002). The fourth of the series covered the performance from Acceptance to the end of Cycle 64 (29 November 2000 to 17 December 2003). The fifth of the series covered performance from Acceptance to the end of Cycle 86 (29 November 2000 to 17 December 2004). The sixth of the series covered performance from Acceptance to the end of Cycle 109 (29 November 2000 to 26 December 2005). In this year's GFO report, we have begun the inclusion of analyses of the JASON altimeter. In past years, JASON and TOPEX were compared during our assessment of the TOPEX altimeter; however, with the end of the TOPEX mission, we have developed methods to report on JASON as it relates to GFO. We see no change trend between the three altimeters and conclude all three are stable based on our cross comparison analyses.

MO-AB-206-02: Testing Gamma Cameras Based On TG177 WG Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Halama, J.

2016-06-15

This education session will cover the physics and operation principles of gamma cameras and PET scanners. The first talk will focus on PET imaging. An overview of the principles of PET imaging will be provided, including positron decay physics, and the transition from 2D to 3D imaging. More recent advances in hardware and software will be discussed, such as time-of-flight imaging, and improvements in reconstruction algorithms that provide for options such as depth-of-interaction corrections. Quantitative applications of PET will be discussed, as well as the requirements for doing accurate quantitation. Relevant performance tests will also be described. Learning Objectives: Bemore » able to describe basic physics principles of PET and operation of PET scanners. Learn about recent advances in PET scanner hardware technology. Be able to describe advances in reconstruction techniques and improvements Be able to list relevant performance tests. The second talk will focus on gamma cameras. The Nuclear Medicine subcommittee has charged a task group (TG177) to develop a report on the current state of physics testing of gamma cameras, SPECT, and SPECT/CT systems. The report makes recommendations for performance tests to be done for routine quality assurance, annual physics testing, and acceptance tests, and identifies those needed satisfy the ACR accreditation program and The Joint Commission imaging standards. The report is also intended to be used as a manual with detailed instructions on how to perform tests under widely varying conditions. Learning Objectives: At the end of the presentation members of the audience will: Be familiar with the tests recommended for routine quality assurance, annual physics testing, and acceptance tests of gamma cameras for planar imaging. Be familiar with the tests recommended for routine quality assurance, annual physics testing, and acceptance tests of SPECT systems. Be familiar with the tests of a SPECT/CT system that include the CT images for SPECT reconstructions. Become knowledgeable of items to be included in annual acceptance testing reports including CT dosimetry and PACS monitor measurements. T. Turkington, GE Healthcare.« less

MO-AB-206-00: Nuclear Medicine Physics and Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This education session will cover the physics and operation principles of gamma cameras and PET scanners. The first talk will focus on PET imaging. An overview of the principles of PET imaging will be provided, including positron decay physics, and the transition from 2D to 3D imaging. More recent advances in hardware and software will be discussed, such as time-of-flight imaging, and improvements in reconstruction algorithms that provide for options such as depth-of-interaction corrections. Quantitative applications of PET will be discussed, as well as the requirements for doing accurate quantitation. Relevant performance tests will also be described. Learning Objectives: Bemore » able to describe basic physics principles of PET and operation of PET scanners. Learn about recent advances in PET scanner hardware technology. Be able to describe advances in reconstruction techniques and improvements Be able to list relevant performance tests. The second talk will focus on gamma cameras. The Nuclear Medicine subcommittee has charged a task group (TG177) to develop a report on the current state of physics testing of gamma cameras, SPECT, and SPECT/CT systems. The report makes recommendations for performance tests to be done for routine quality assurance, annual physics testing, and acceptance tests, and identifies those needed satisfy the ACR accreditation program and The Joint Commission imaging standards. The report is also intended to be used as a manual with detailed instructions on how to perform tests under widely varying conditions. Learning Objectives: At the end of the presentation members of the audience will: Be familiar with the tests recommended for routine quality assurance, annual physics testing, and acceptance tests of gamma cameras for planar imaging. Be familiar with the tests recommended for routine quality assurance, annual physics testing, and acceptance tests of SPECT systems. Be familiar with the tests of a SPECT/CT system that include the CT images for SPECT reconstructions. Become knowledgeable of items to be included in annual acceptance testing reports including CT dosimetry and PACS monitor measurements. T. Turkington, GE Healthcare.« less

External quality assurance of HER2 fluorescence in situ hybridisation testing: results of a UK NEQAS pilot scheme.

PubMed

Bartlett, John M S; Ibrahim, Merdol; Jasani, Bharat; Morgan, John M; Ellis, Ian; Kay, Elaine; Magee, Hilary; Barnett, Sarah; Miller, Keith

2007-07-01

Trastuzumab provides clinical benefit for advanced and early breast cancer patients whose tumours over-express or have gene amplification of the HER2 oncogene. The UK National External Quality Assessment Scheme (NEQAS) for immunohistochemical testing was established to assess and improve the quality of HER2 immunohistochemical testing. However, until recently, no provision was available for HER2 fluorescence in situ hybridisation (FISH) testing. A pilot scheme was set up to review the performance of FISH testing in clinical diagnostic laboratories. FISH was performed in 6 reference and 31 participating laboratories using a cell line panel with known HER2 status. Using results from reference laboratories as a criterion for acceptable performance, 60% of all results returned by participants were appropriate and 78% either appropriate or acceptable. However, 22.4% of results returned were deemed inappropriate, including 13 cases (4.2%) where a misdiagnosis would have been made had these been clinical specimens. The results of three consecutive runs show that both reference laboratories and a proportion of routine clinical diagnostic (about 25%) centres can consistently achieve acceptable quality control of HER2 testing. Data from a significant proportion of participating laboratories show that further steps are required, including those taken via review of performance under schemes such as NEQAS, to improve quality of HER2 testing by FISH in the "real world".

Control Method for Video Guidance Sensor System

NASA Technical Reports Server (NTRS)

Howard, Richard T. (Inventor); Book, Michael L. (Inventor); Bryan, Thomas C. (Inventor)

2005-01-01

A method is provided for controlling operations in a video guidance sensor system wherein images of laser output signals transmitted by the system and returned from a target are captured and processed by the system to produce data used in tracking of the target. Six modes of operation are provided as follows: (i) a reset mode; (ii) a diagnostic mode; (iii) a standby mode; (iv) an acquisition mode; (v) a tracking mode; and (vi) a spot mode wherein captured images of returned laser signals are processed to produce data for all spots found in the image. The method provides for automatic transition to the standby mode from the reset mode after integrity checks are performed and from the diagnostic mode to the reset mode after diagnostic operations are commands is permitted only when the system is in the carried out. Further, acceptance of reset and diagnostic standby mode. The method also provides for automatic transition from the acquisition mode to the tracking mode when an acceptable target is found.

Control method for video guidance sensor system

NASA Technical Reports Server (NTRS)

Howard, Richard T. (Inventor); Book, Michael L. (Inventor); Bryan, Thomas C. (Inventor)

2005-01-01

A method is provided for controlling operations in a video guidance sensor system wherein images of laser output signals transmitted by the system and returned from a target are captured and processed by the system to produce data used in tracking of the target. Six modes of operation are provided as follows: (i) a reset mode; (ii) a diagnostic mode; (iii) a standby mode; (iv) an acquisition mode; (v) a tracking mode; and (vi) a spot mode wherein captured images of returned laser signals are processed to produce data for all spots found in the image. The method provides for automatic transition to the standby mode from the reset mode after integrity checks are performed and from the diagnostic mode to the reset mode after diagnostic operations are carried out. Further, acceptance of reset and diagnostic commands is permitted only when the system is in the standby mode. The method also provides for automatic transition from the acquisition mode to the tracking mode when an acceptable target is found.

28 CFR 70.44 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... Consideration must be given to such matters as contractor integrity, record of past performance, financial and... performed or performance required, including the range of acceptable characteristics or minimum acceptable...

43 CFR 12.944 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... Consideration shall be given to such matters as contractor integrity, record of past performance, financial and... performed or performance required, including the range of acceptable characteristics or minimum acceptable...

Psychophysical basis for maximum pushing and pulling forces: A review and recommendations.

PubMed

Garg, Arun; Waters, Thomas; Kapellusch, Jay; Karwowski, Waldemar

2014-03-01

The objective of this paper was to perform a comprehensive review of psychophysically determined maximum acceptable pushing and pulling forces. Factors affecting pushing and pulling forces are identified and discussed. Recent studies show a significant decrease (compared to previous studies) in maximum acceptable forces for males but not for females when pushing and pulling on a treadmill. A comparison of pushing and pulling forces measured using a high inertia cart with those measured on a treadmill shows that the pushing and pulling forces using high inertia cart are higher for males but are about the same for females. It is concluded that the recommendations of Snook and Ciriello (1991) for pushing and pulling forces are still valid and provide reasonable recommendations for ergonomics practitioners. Regression equations as a function of handle height, frequency of exertion and pushing/pulling distance are provided to estimate maximum initial and sustained forces for pushing and pulling acceptable to 75% male and female workers. At present it is not clear whether pushing or pulling should be favored. Similarly, it is not clear what handle heights would be optimal for pushing and pulling. Epidemiological studies are needed to determine relationships between psychophysically determined maximum acceptable pushing and pulling forces and risk of musculoskeletal injuries, in particular to low back and shoulders.

Psychophysical basis for maximum pushing and pulling forces: A review and recommendations

PubMed Central

Garg, Arun; Waters, Thomas; Kapellusch, Jay; Karwowski, Waldemar

2015-01-01

The objective of this paper was to perform a comprehensive review of psychophysically determined maximum acceptable pushing and pulling forces. Factors affecting pushing and pulling forces are identified and discussed. Recent studies show a significant decrease (compared to previous studies) in maximum acceptable forces for males but not for females when pushing and pulling on a treadmill. A comparison of pushing and pulling forces measured using a high inertia cart with those measured on a treadmill shows that the pushing and pulling forces using high inertia cart are higher for males but are about the same for females. It is concluded that the recommendations of Snook and Ciriello (1991) for pushing and pulling forces are still valid and provide reasonable recommendations for ergonomics practitioners. Regression equations as a function of handle height, frequency of exertion and pushing/pulling distance are provided to estimate maximum initial and sustained forces for pushing and pulling acceptable to 75% male and female workers. At present it is not clear whether pushing or pulling should be favored. Similarly, it is not clear what handle heights would be optimal for pushing and pulling. Epidemiological studies are needed to determine relationships between psychophysically determined maximum acceptable pushing and pulling forces and risk of musculoskeletal injuries, in particular to low back and shoulders. PMID:26664045

The Short-Term Effect of Grade Retention on Peer Relations and Academic Performance of At-Risk First Graders

PubMed Central

Gleason, Katie A.; Kwok, Oi-man; Hughes, Jan N.

2010-01-01

Using latent variable structural equation modeling, we tested a theoretical model positing that grade retention has a positive effect on children’s teacher- and peer-rated academic competencies and on sociometric measures of peer acceptance. We also expected that the positive effect of grade retention on peer acceptance would be mediated by children’s ability to meet academic challenges in their classrooms. Participants were 350 (52.6% male) ethnically diverse and academically at-risk first graders attending 1 of 3 school districts in Texas. An individually administered test of academic achievement, teacher-report and peer-report measures of academic competence, and peer-report measures of peer acceptance were collected on children in first grade and 1 year later, at which time 63 children were repeating first grade and 287 were in second grade. The hypothesized model provided a good fit to the data. Children’s academic competencies, as perceived by peers and teachers, fully mediated the effect of retention on subsequent peer acceptance. PMID:20431696

[Feasibility and acceptance of computer-based assessment for the identification of psychosocially distressed patients in routine clinical care].

PubMed

Sehlen, Susanne; Ott, Martin; Marten-Mittag, Birgitt; Haimerl, Wolfgang; Dinkel, Andreas; Duehmke, Eckhart; Klein, Christian; Schaefer, Christof; Herschbach, Peter

2012-07-01

This study investigated feasibility and acceptance of computer-based assessment for the identification of psychosocial distress in routine radiotherapy care. 155 cancer patients were assessed using QSC-R10, PO-Bado-SF and Mach-9. The congruence between computerized tablet PC and conventional paper assessment was analysed in 50 patients. The agreement between the 2 modes was high (ICC 0.869-0.980). Acceptance of computer-based assessment was very high (>95%). Sex, age, education, distress and Karnofsky performance status (KPS) did not influence acceptance. Computerized assessment was rated more difficult by older patients (p = 0.039) and patients with low KPS (p = 0.020). 75.5% of the respondents supported referral for psycho-social intervention for distressed patients. The prevalence of distress was 27.1% (QSC-R10). Computer-based assessment allows easy identification of distressed patients. Level of staff involvement is low, and the results are quickly available for care providers. © Georg Thieme Verlag KG Stuttgart · New York.

Propulsive-lift concepts for improved low-speed performance of supersonic cruise arrow-wing configurations

NASA Technical Reports Server (NTRS)

Coe, P. L., Jr.

1976-01-01

Low-aspect-ratio highly swept arrow-wing supersonic aircraft possess high levels of aerodynamic efficiency at supersonic cruising speeds, however, their inherently poor low-speed lift characteristics require design constraints that compromise supersonic performance. The data discussed in this paper were obtained in wind tunnel tests with supersonic crusing configurations, in which propulsive-lift concepts were used to improve low-speed performance. The data show that the increased low-speed lift provided by propulsive-lift permits reduction of both wing size and installed thrust. This yields a batter engine/airframe match for improved supersonic cruise efficiency and range, while still providing acceptable take-off field lengths.

Robust, Decoupled, Flight Control Design with Rate Saturating Actuators

NASA Technical Reports Server (NTRS)

Snell, S. A.; Hess, R. A.

1997-01-01

Techniques for the design of control systems for manually controlled, high-performance aircraft must provide the following: (1) multi-input, multi-output (MIMO) solutions, (2) acceptable handling qualities including no tendencies for pilot-induced oscillations, (3) a tractable approach for compensator design, (4) performance and stability robustness in the presence of significant plant uncertainty, and (5) performance and stability robustness in the presence actuator saturation (particularly rate saturation). A design technique built upon Quantitative Feedback Theory is offered as a candidate methodology which can provide flight control systems meeting these requirements, and do so over a considerable part of the flight envelope. An example utilizing a simplified model of a supermaneuverable fighter aircraft demonstrates the proposed design methodology.

DOD and Coast Guard: Actions Needed to Increase Oversight and Management Information on Hazing Incidents Involving Servicemembers

DTIC Science & Technology

2016-02-01

The published product may be reproduced and distributed in its entirety without further permission from GAO. However, because this work may contain...We conducted this performance audit from April 2015 to February 2016 in accordance with generally accepted government auditing standards. These...standards require that we plan and perform the audit to obtain sufficient, appropriate evidence to provide a reasonable basis for our findings and

Understanding stakeholder important outcomes and perceptions of equity, acceptability and feasibility of a care model for haemophilia management in the US: a qualitative study.

PubMed

Lane, S J; Sholapur, N S; Yeung, C H T; Iorio, A; Heddle, N M; Sholzberg, M; Pai, M

2016-07-01

Care for persons with haemophilia (PWH) is most commonly delivered through the integrated care model used by Hemophilia Treatment Centers (HTCs). Although this model is widely accepted as the gold standard for the management of haemophilia; there is little evidence comparing different care models. We performed a qualitative study to gain insight into issues related to outcomes, acceptability, equity and feasibility of different care models operating in the US. We used a qualitative descriptive approach with semi-structured interviews. Purposive sampling was used to recruit individuals with experience providing or receiving care for haemophilia in the US through either an integrated care centre, a specialty pharmacy or homecare company, or by a specialist in a non-specialized centre. Persons with haemophilia, parents of PWH aged ≤18, healthcare providers, insurance company representatives and policy developers were invited to participate. Twenty-nine interviews were conducted with participants representing 18 US states. Participants in the study sample had experience receiving or providing care predominantly within an HTC setting. Integrated care at HTCs was highly acceptable to participants, who appreciated the value of specialized, expert care in a multidisciplinary team setting. Equity and feasibility issues were primarily related to health insurance and funding limitations. Additional research is required to document the impact of care on health and psychosocial outcomes and identify effective ways to facilitate equitable access to haemophilia treatment and care. © 2016 John Wiley & Sons Ltd.

Acceptance Testing of the Vapor Phase Catalytic Ammonia Removal Engineering Development Unit

NASA Technical Reports Server (NTRS)

Flynn, Michael; Fisher, John; Kliss, Mark; Tleimat, Maher; Quinn, Gregory; Fort, James; Nalette, Tim; Baker, Gale

2005-01-01

This paper describes the results of acceptance testing of the Vapor Phase Catalytic Ammonia Removal (VPCAR) technology. The VPCAR technology is currently being developed by NASA as a Mars transit vehicle water recycling system. NASA has recently completed a grant to develop a next generation VPCAR system. This grant was peer reviewed and funded through the Advanced Life Support (ALS) National Research Announcement (NRA). The grant funded a contract with Water Reuse Technology Inc. to construct an engineering development unit. This contract concluded with the shipment of the final deliverable to NASA on 8/31/03. The objective of the acceptance testing was to characterize the performance of this new system. This paper presents the results of mass power, and volume measurements for the delivered system. In addition, product water purity analysis for a Mars transit mission and a planetary base wastewater ersatz are provided. Acoustic noise levels, interface specifications and system reliability results are also discussed. An assessment of the readiness of the technology for human testing and recommendations for future improvements are provided.

Thin client performance for remote 3-D image display.

PubMed

Lai, Albert; Nieh, Jason; Laine, Andrew; Starren, Justin

2003-01-01

Several trends in biomedical computing are converging in a way that will require new approaches to telehealth image display. Image viewing is becoming an "anytime, anywhere" activity. In addition, organizations are beginning to recognize that healthcare providers are highly mobile and optimal care requires providing information wherever the provider and patient are. Thin-client computing is one way to support image viewing this complex environment. However little is known about the behavior of thin client systems in supporting image transfer in modern heterogeneous networks. Our results show that using thin-clients can deliver acceptable performance over conditions commonly seen in wireless networks if newer protocols optimized for these conditions are used.

Performance evaluation of the Solar Building Test Facility

NASA Technical Reports Server (NTRS)

Jensen, R. N.

1981-01-01

The general performance of the NASA Solar Building Test Facility (SBTF) and its subsystems and components over a four year operational period is discussed, and data are provided for a typical one year period. The facility consists of a 4645 sq office building modified to accept solar heated water for operation of an absorption air conditioner and a baseboard heating system. An adjoining 1176 sq solar flat plate collector field with a 114 cu tank provides the solar heated water. The solar system provided 57 percent of the energy required for heating and cooling on an annual basis. The average efficiency of the solar collectors was 26 percent over a one year period.

Staff acceptance of video monitoring for coordination: a video system to support perioperative situation awareness.

PubMed

Kim, Young Ju; Xiao, Yan; Hu, Peter; Dutton, Richard

2009-08-01

To understand staff acceptance of a remote video monitoring system for operating room (OR) coordination. Improved real-time remote visual access to OR may enhance situational awareness but also raises privacy concerns for patients and staff. Survey. A system was implemented in a six-room surgical suite to display OR monitoring video at an access restricted control desk area. Image quality was manipulated to improve staff acceptance. Two months after installation, interviews and a survey were conducted on staff acceptance of video monitoring. About half of all OR personnel responded (n = 63). Overall levels of concerns were low, with 53% rated no concerns and 42% little concern. Top two reported uses of the video were to see if cases are finished and to see if a room is ready. Viewing the video monitoring system as useful did not reduce levels of concern. Staff in supervisory positions perceived less concern about the system's impact on privacy than did those supervised (p < 0.03). Concerns for patient privacy correlated with concerns for staff privacy and performance monitoring. Technical means such as manipulating image quality helped staff acceptance. Manipulation of image quality resulted overall acceptance of monitoring video, with residual levels of concerns. OR nurses may express staff privacy concern in the form of concerns over patient privacy. This study provided suggestions for technological and implementation strategies of video monitoring for coordination use in OR. Deployment of communication technology and integration of clinical information will likely raise concerns over staff privacy and performance monitoring. The potential gain of increased information access may be offset by negative impact of a sense of loss of autonomy.

Specific test and evaluation plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hays, W.H.

1998-03-20

The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made to the 241-AX-B Valve Pit by the W-314 Project. The STEP develops the outline for test procedures that verify the system`s performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation Plan (TEP). Testing includes Validations and Verifications (e.g., Commercial Grade Item Dedication activities), Factory Acceptance Tests (FATs), installation tests and inspections, Construction Acceptance Tests (CATs), Acceptance Test Procedures (ATPs), Pre-Operational Test Procedures (POTPs), andmore » Operational Test Procedures (OTPs). It should be noted that POTPs are not required for testing of the transfer line addition. The STEP will be utilized in conjunction with the TEP for verification and validation.« less

46 CFR 160.170-7 - Design, construction, and performance of automatic release mechanisms.

Code of Federal Regulations, 2013 CFR

2013-10-01

... subpart). All steel products, except corrosion resistant steel, must be galvanized to provide high-quality...; (3) Steel. Each major structural component of each release mechanism must be constructed of steel. Other materials may be used if accepted by the Commandant as equivalent or superior. Sheet steel and...

46 CFR 160.170-7 - Design, construction, and performance of automatic release mechanisms.

Code of Federal Regulations, 2012 CFR

2012-10-01

... subpart). All steel products, except corrosion resistant steel, must be galvanized to provide high-quality...; (3) Steel. Each major structural component of each release mechanism must be constructed of steel. Other materials may be used if accepted by the Commandant as equivalent or superior. Sheet steel and...

46 CFR 160.170-7 - Design, construction, and performance of automatic release mechanisms.

Code of Federal Regulations, 2014 CFR

2014-10-01

... subpart). All steel products, except corrosion resistant steel, must be galvanized to provide high-quality...; (3) Steel. Each major structural component of each release mechanism must be constructed of steel. Other materials may be used if accepted by the Commandant as equivalent or superior. Sheet steel and...

What Really Matters: Assessing Individual Problem-Solving Performance in the Context of Biological Sciences

ERIC Educational Resources Information Center

Anderson, William L.; Sensibaugh, Cheryl A.; Osgood, Marcy P.; Mitchell, Steven M.

2011-01-01

The evaluation of higher-level cognitive skills can augment traditional discipline-based knowledge testing by providing timely assessment of individual student problem-solving abilities that are critical for success in any professional development program. However, the wide-spread acceptance and implementation of higher level cognitive skills…

24 CFR 985.103 - SEMAP score and overall performance rating.

Code of Federal Regulations, 2010 CFR

2010-04-01

... indicates that the auditor is unable to provide an opinion as to whether the PHA's financial statements are presented fairly in all material respects in conformity with generally accepted accounting principals, or an... in relation to the financial statements taken as a whole, the PHA will automatically be given an...

Soil disturbance assessment of a cable logging operation performing five silvicultural prescriptions

Treesearch

John Klepac; Steve Reutebuch

2003-01-01

Evaluating alternative methods for regenerating second-growth Douglas-fir (Pseudotsuga menziesii) forests in the Pacific Northwest is an area of interest for resource managers. To meet future demands for timber supply as well as provide stands that are visually acceptable by the public and ecologically viable, a thorough understanding of these...

76 FR 27030 - Intent To Prepare a Supplemental Environmental Impact Statement for the Indianapolis, White River...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-10

... performance standards nor does it provide the level of protection for which the project was authorized. A full... consideration of all alternatives, the best plan will be selected to achieve acceptable risk levels. FOR FURTHER... identified alternatives, especially aesthetics, communities, economics, biological and cultural resources...

"A Limited Number of Advertising Pages." Journalism Monographs, No. 25.

ERIC Educational Resources Information Center

Garberson, John W.

This report provides information on the background against which the "Readers Digest" began to carry advertising in the United States, the implementation of the decision to do so, the evolution from accepting ads to selling space aggressively, and the performance of the magazine's advertising sales forces as of early 1972. The…

Evaluating Models of Human Performance: Safety-Critical Systems Applications

NASA Technical Reports Server (NTRS)

Feary, Michael S.

2012-01-01

This presentation is part of panel discussion on Evaluating Models of Human Performance. The purpose of this panel is to discuss the increasing use of models in the world today and specifically focus on how to describe and evaluate models of human performance. My presentation will focus on discussions of generating distributions of performance, and the evaluation of different strategies for humans performing tasks with mixed initiative (Human-Automation) systems. I will also discuss issues with how to provide Human Performance modeling data to support decisions on acceptability and tradeoffs in the design of safety critical systems. I will conclude with challenges for the future.

Acceptability, Usability, and Views on Deployment of Peek, a Mobile Phone mHealth Intervention for Eye Care in Kenya: Qualitative Study.

PubMed

Lodhia, Vaishali; Karanja, Sarah; Lees, Shelley; Bastawrous, Andrew

2016-05-09

The Portable Eye Examination Kit (Peek) is a mobile phone-based ophthalmic testing system that has been developed to perform comprehensive eye examinations. Shortages in ophthalmic personnel, the high cost, and the difficulty in transporting equipment have made it challenging to offer services, particularly in rural areas. Peek offers a solution for overcoming barriers of limited access to traditional ophthalmic testing methods and has been pilot tested on adults in Nakuru, Kenya, and compared with traditional eye examination tools. This qualitative study evaluated the acceptability and usability of Peek in addition to perceptions regarding its adoption and nationwide deployment. Semistructured interviews were conducted with patients and analyzed using a framework approach. This included analysis of interviews from 20 patients, 8 health care providers (HCPs), and 4 key decision makers in ophthalmic health care provision in Kenya. The participants were purposefully sampled. The coding structure involved predefined themes for assessing the following: (1) the context, that is, environment, user, task, and technology; (2) patient acceptability, that is, patients' perceived benefits, patient preference, and patient satisfaction; (3) usability, that is, efficiency, effectiveness, learnability, and flexibility and operability of Peek; and (4) the benefits of Peek in strengthening eye care provision, that is, capabilities enhancer, opportunity creator, social enabler, and knowledge generator. Emerging themes relating to the objectives were explored from the data using thematic analysis. Patients found Peek to be acceptable because of its benefits in overcoming the barriers to accessing ophthalmic services. Most thought it to be fast, convenient, and able to reach a large population. All patients expressed being satisfied with Peek. The HCPs perceived it to satisfy the criteria for usability and found Peek to be acceptable based on the technology acceptance model. Peek was also found to have features required for strengthening ophthalmic delivery by aiding detection and diagnosis, provision of decision support, improving communication between provider and patient and among providers, linking patients to services, monitoring, and assisting in education and training. Some of the deployment-related issues included the need for government and community involvement, communication and awareness creation, data protection, infrastructure development including capacity creation, and training and maintenance support. According to all parties interviewed, Peek is an acceptable solution, as it provides a beneficial service, supports patients' needs, and fulfills HCPs' roles, overall contributing to strengthening eye health.

Optoelectronic Properties of Conjugated Block Copolymer with Flexible Linking Group

NASA Astrophysics Data System (ADS)

Hu, Zhiqi; Verduzco, Rafael

State-of-the-art organic photovoltaics (OPVs) are prepared by depositing a disordered, co-continuous donor and acceptor blend. While optimization of material processing has produced significant improvements in performance, a fundamental understanding of charge separation and recombination at the donor/acceptor interface is lacking. Block copolymers with donor and acceptor polymer blocks provide an opportunity for controlling the donor-accepter interfacial structure and understanding its relationship to charge separation and photovoltaic performance. Here, we report the synthesis and characterization of donor-linker-acceptor block copolymers for use in OPVs. A series of poly(3-hexylthiophene)-block- poly((9,9-dioctylfluorene)-2,7-diyl-alt-[4,7-bis(thiophen-5-yl)-2,1,3-benzothiadiazole]-2',2''-diyl) (P3HT-linkerPFTBT) are synthesized with flexible oligo-ethylene glycol (PEG) linkers. Photoluminescence measurements demonstrate that the insertion of a non-conjugated linker has a significant impact on energy transfer between the two blocks, and the block copolymers are used as additives for bulk heterojunction OPVs. This work provides insight into the charge separation process and demonstrates a technique for tailoring the donor-accepter interface in OPVs.

The Introduction of Custom Earplugs Aboard LCS-1

DTIC Science & Technology

2016-03-10

reports on the use of foam and custom HPDs, and provides interim recommendations. Custom-molded HPDs were judged by users to be superior in comfort...and able to be worn for longer periods of time than other devices ( foam ). Based on data from LCS and other related studies, the performance...acceptance, and cost of the custom-molded product are comparable, or better, than foam HPDs. The interim recommendation is to provide multiple types of

Acceptance and Utilization of Technology (UTAUT) as a Method of Technology Acceptance Model of Mitigation Disaster Website

NASA Astrophysics Data System (ADS)

Siswanto, T.; Shofiati, R.; Hartini, H.

2018-01-01

www.mitigasi-bencana.com as a knowledge management website created based on survey results in April-July 2014 in East Java and Central Java provinces, indicates a gap between the expectations and reality that exist in the services provided by the regional disaster management agency. Based on condition analysis, the gaps that occur can be reduced if the community has the understanding and knowledge of adequate disaster mitigation. The problem that arises later is whether the chosen technology solution is appropriate and acceptable to the public? The methodology used in this study using the Technology Acceptance Model development is the Unified Theory of Acceptance and Utilization of Technology (UTAUT). Feedback obtained from respondents KarangTaruna youth SelogedongBantul, www.mitigasi-bencana.com can be accepted by the respondents, but from processed data is obtained only UTAUT hypotheses on the relationship dimension eligible for Social Expectancy on the Attitude toward technology, which means the higher the perception of the Social Expectancy, the higher the perception of the Attitude toward technology. Because www.mitigasi-bencana.com is new socialized so that society still need time to explore content information and knowledge contained therein. To be accepted by user, a knowledge management application must prepare various aspects of Performance Expectancy, Effort Expectancy, Social Factors, Facilitating Conditions and Attitude.

Parents Who Decline HPV Vaccination: Who Later Accepts and Why?

PubMed

Kornides, Melanie L; McRee, Annie-Laurie; Gilkey, Melissa B

2018-03-01

Parental declination contributes to low human papillomavirus (HPV) vaccination coverage among US adolescents, resulting in missed opportunities for cancer prevention. We sought to characterize parents' acceptance of HPV vaccination after declination ("secondary acceptance"). In September 2016, we conducted an online survey with a national sample of parents of children ages 11 to 17 years. For those who reported having ever declined HPV vaccination for their children (n = 494), our survey assessed whether they accepted the vaccine at a subsequent visit. We used multivariable logistic regression to assess correlates of secondary acceptance. Overall, 45% of parents reported secondary acceptance of HPV vaccination, and an additional 24% intended to vaccinate in the next 12 months. In multivariable analyses, secondary acceptance was associated with receiving follow-up counseling about HPV vaccination from a health care provider (odds ratio, 2.16; 95% confidence interval, 1.42-3.28). However, only 53% of parents overall reported receiving such counseling. Secondary acceptance was also associated with receiving a higher quality HPV vaccine recommendation from a provider during the initial discussion and greater satisfaction with provider communication, as well as higher vaccination confidence. Among the reasons for secondary acceptance, parents most commonly reported the child getting older (45%), learning more about HPV vaccine (34%), and receiving a provider recommendation (33%). Our findings suggest secondary acceptance of HPV vaccination is common, with more than two-thirds of parents in this national sample accepting or intending to accept HPV vaccination after declination. Providers should seek to motivate secondary acceptance by delivering repeated, high-quality recommendations for HPV vaccination. Copyright © 2017 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

Driving comfort, enjoyment and acceptance of automated driving - effects of drivers' age and driving style familiarity.

PubMed

Hartwich, Franziska; Beggiato, Matthias; Krems, Josef F

2018-02-23

Automated driving has the potential to improve the safety and efficiency of future traffic and to extend elderly peoples' driving life, provided it is perceived as comfortable and joyful and is accepted by drivers. Driving comfort could be enhanced by familiar automated driving styles based on drivers' manual driving styles. In a two-stage driving simulator study, effects of driving automation and driving style familiarity on driving comfort, enjoyment and system acceptance were examined. Twenty younger and 20 older drivers performed a manual and four automated drives of different driving style familiarity. Acceptance, comfort and enjoyment were assessed after driving with standardised questionnaires, discomfort during driving via handset control. Automation increased both age groups' comfort, but decreased younger drivers' enjoyment. Younger drivers showed higher comfort, enjoyment and acceptance with familiar automated driving styles, whereas older drivers preferred unfamiliar, automated driving styles tending to be faster than their age-affected manual driving styles. Practitioner Summary: Automated driving needs to be comfortable and enjoyable to be accepted by drivers, which could be enhanced by driving style individualisation. This approach was evaluated in a two-stage driving simulator study for different age groups. Younger drivers preferred familiar driving styles, whereas older drivers preferred driving styles unaffected by age.

Sensory Profile and Consumer Acceptability of Prebiotic White Chocolate with Sucrose Substitutes and the Addition of Goji Berry (Lycium barbarum).

PubMed

Morais Ferreira, Janaína Madruga; Azevedo, Bruna Marcacini; Luccas, Valdecir; Bolini, Helena Maria André

2017-03-01

Functional food is a product containing nutrients that provide health benefits beyond basic nutrition. The objective of the present study was to evaluate the descriptive sensory profile and consumers' acceptance of functional (prebiotic) white chocolates with and without the addition of an antioxidant source (goji berry [GB]) and sucrose replacement. The descriptive sensory profile was determined by quantitative descriptive analysis (QDA) with trained assessors (n = 12), and the acceptance test was performed with 120 consumers. The correlation of descriptive and hedonic data was determined by partial least squares (PLS). The results of QDA indicated that GB reduces the perception of most aroma and flavor attributes, and enhances the bitter taste, bitter aftertaste, astringency, and most of the texture attributes. The consumers' acceptance of the chocolates was positive for all sensory characteristics, with acceptance scores above 6 on a 9-point scale. According to the PLS regression analysis, the descriptors cream color and cocoa butter flavor contributed positively to the acceptance of functional white chocolates. Therefore, prebiotic white chocolate with or without the addition of GB is innovative and can attract consumers, due to its functional properties, being a promising alternative for the food industry. © 2017 Institute of Food Technologists®.

Small, high pressure ratio compressor: Aerodynamic and mechanical design

NASA Technical Reports Server (NTRS)

Bryce, C. A.; Erwin, J. R.; Perrone, G. L.; Nelson, E. L.; Tu, R. K.; Bosco, A.

1973-01-01

The Small, High-Pressure-Ratio Compressor Program was directed toward the analysis, design, and fabrication of a centrifugal compressor providing a 6:1 pressure ratio and an airflow rate of 2.0 pounds per second. The program consists of preliminary design, detailed areodynamic design, mechanical design, and mechanical acceptance tests. The preliminary design evaluate radial- and backward-curved blades, tandem bladed impellers, impeller-and diffuser-passage boundary-layer control, and vane, pipe, and multiple-stage diffusers. Based on this evaluation, a configuration was selected for detailed aerodynamic and mechanical design. Mechanical acceptance test was performed to demonstrate that mechanical design objectives of the research package were met.

Applications of inertial-sensor high-inheritance instruments to DSN precision antenna pointing

NASA Technical Reports Server (NTRS)

Goddard, R. E.

1992-01-01

Laboratory test results of the initialization and tracking performance of an existing inertial-sensor-based instrument are given. The instrument, although not primarily designed for precision antenna pointing applications, demonstrated an on-average 10-hour tracking error of several millidegrees. The system-level instrument performance is shown by analysis to be sensor limited. Simulated instrument improvements show a tracking error of less than 1 mdeg, which would provide acceptable performance, i.e., low pointing loss, for the DSN 70-m antenna sub network, operating at Ka-band (1-cm wavelength).

Applications of inertial-sensor high-inheritance instruments to DSN precision antenna pointing

NASA Technical Reports Server (NTRS)

Goddard, R. E.

1992-01-01

Laboratory test results of the initialization and tracking performance of an existing inertial-sensor-based instrument are given. The instrument, although not primarily designed for precision antenna pointing applications, demonstrated an on-average 10-hour tracking error of several millidegrees. The system-level instrument performance is shown by analysis to be sensor limited. Simulated instrument improvements show a tracking error of less than 1 mdeg, which would provide acceptable performance, i.e., low pointing loss, for the Deep Space Network 70-m antenna subnetwork, operating at Ka-band (1-cm wavelength).

GFO Altimeter Engineering Assessment Report. Update: The First 43 Cycles Since Acceptance, November 29, 2000 to November 30, 2002, Version 1

NASA Technical Reports Server (NTRS)

Hancock, D. W., III; Hayne, G. S.; Lockwood, D. W.; Brooks, R. L.

2003-01-01

The U.S. Navy's Geosat Follow-On (GFO) Mission, launched on February 20, 1998, is one of a series of altimetric satellites which include Seasat, Geosat, ERS-1, and TOPEX/POSEIDON (T/P). The purpose of this report is to document the GFO altimeter performance determined from the analyses and results performed by NASA's GSFC and Wallops altimeter, calibration team. It is the third of an anticipated series of NASA's GSFC and Wallops GFO performance documents, each of which will update assessment results. This report covers the performance from instrument acceptance by the Navy on November 29, 2000, to the end of Cycle 42 on November 30, 2002. Data derived from GFO will lead to improvements in the knowledge of ocean circulation, ice sheet topography, and climate change. In order to capture the maximum amount of information from the GFO data, accurate altimeter calibrations are required for the civilian data set which NOAA will produce. Wallops Flight Facility has provided similar products for the Geosat and T/P missions and is doing the same for GFO.

GEOSAT Follow-on (GFO) Altimeter Document Series. Volume 1; GFO Altimeter Engineering Assessment Report: From Launch to Acceptance, 10 February 1998 to 29 November 2000; 1.0

NASA Technical Reports Server (NTRS)

Hancock, David W., III; Hayne, George S.; Brooks, Ronald L.; Lockwood, Dennis W.

2001-01-01

The US Navy's Geosat Follow-On (GFO) Mission, launched on February 10, 1998, is the latest in a series of altimetric satellites which include Seasat, Geosat, ERS-1, and TOPEX/POSEIDON (T/P). The purpose of this report is to document the GFO altimeter performance determined from the analyses and results performed by the NASA/GSFC/Wallops altimeter calibration team. It is the first of an anticipated series of NASA/GSFC/Wallops' GFO performance documents, each of which will update assessment results. This report covers the performance from launch to instrument acceptance by the Navy on November 29, 2000. Data derived from GFO will lead to improvements in the knowledge of ocean circulation, ice sheet topography, and climate change. In order to capture the maximum amount of information from the GFO data, accurate altimeter calibrations are required for the civilian data set which NOAA will produce. Wallops Flight Facility has provided similar products for the Geosat and T/P missions and is doing the same for GFO.

GFO Altimeter Engineering Assessment Report. Update: The First 65 Cycles Since Acceptance, November 29, 2000 to December 9, 2003, Version 1

NASA Technical Reports Server (NTRS)

Hancock, D. W., III; Hayne, G. S.; Lockwood, D. W.; Brooks, R. L.

2004-01-01

The U.S. Navy's Geosat Follow-On (GFO) Mission, launched February 10, 1998, is one of a series of altimetric satellites which include Seasat, Geosat, ERS-1, and TOPEX/POSEIDON (T/P). The purpose of this report is to document the GFO altimeter performance determined from the analyses and results performed by NASA's GSFC and Wallops altimeter calibration team. It is the fourth of an anticipated series of NASA's GSFC and Wallops GFO performance documents, each of which will update assessment results. This report covers the performance from instrument acceptance by the Navy on November 29, 2000, to the end of Cycle 65 on December 9, 2003. Data derived from GFO will lead to improvements in the knowledge of ocean circulation, ice sheet topography, and climate change. In order to capture the maximum amount of information from the GFO data, accurate altimeter calibrations are required for the civilian data set which NOAA will produce. Wallops Flight Facility has provided similar products for the Geosat and T/P missions and is doing the same for GFO.

Peer-assessment of medical communication skills: the impact of students' personality, academic and social reputation on behavioural assessment.

PubMed

Hulsman, Robert L; Peters, Joline F; Fabriek, Marcel

2013-09-01

Peer-assessment of communication skills may contribute to mastery of assessment criteria. When students develop the capacity to judge their peers' performance, they might improve their capacity to examine their own clinical performance. In this study peer-assessment ratings are compared to teacher-assessment ratings. The aim of this paper is to explore the impact of personality and social reputation as source of bias in assessment of communication skills. Second year students were trained and assessed history taking communication skills. Peers rated the students' personality and academic and social reputation. Peer-assessment ratings were significantly correlated with teacher-ratings in a summative assessment of medical communication. Peers did not provide negative ratings on final scales but did provide negative ratings on subcategories. Peer- and teacher-assessments were both related to the students' personality and academic reputation. Peer-assessment cannot replace teacher-assessment if the assessment should result in high-stake decisions about students. Our data do not confirm the hypothesis that peers are overly biased by personality and reputation characteristics in peer-assessment of performance. Early introduction of peer-assessment in medical education would facilitate early acceptance of this mode of evaluation and would promote early on the habit of critical evaluation of professional clinical performance and acceptance of being evaluated critically by peers. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Robust Control for Microgravity Vibration Isolation using Fixed Order, Mixed H2/Mu Design

NASA Technical Reports Server (NTRS)

Whorton, Mark

2003-01-01

Many space-science experiments need an active isolation system to provide a sufficiently quiescent microgravity environment. Modern control methods provide the potential for both high-performance and robust stability in the presence of parametric uncertainties that are characteristic of microgravity vibration isolation systems. While H2 and H(infinity) methods are well established, neither provides the levels of attenuation performance and robust stability in a compensator with low order. Mixed H2/H(infinity), controllers provide a means for maximizing robust stability for a given level of mean-square nominal performance while directly optimizing for controller order constraints. This paper demonstrates the benefit of mixed norm design from the perspective of robustness to parametric uncertainties and controller order for microgravity vibration isolation. A nominal performance metric analogous to the mu measure, for robust stability assessment is also introduced in order to define an acceptable trade space from which different control methodologies can be compared.

Mobile computing acceptance factors in the healthcare industry: a structural equation model.

PubMed

Wu, Jen-Her; Wang, Shu-Ching; Lin, Li-Min

2007-01-01

This paper presents a revised technology acceptance model to examine what determines mobile healthcare systems (MHS) acceptance by healthcare professionals. Conformation factor analysis was performed to test the reliability and validity of the measurement model. The structural equation modeling technique was used to evaluate the causal model. The results indicated that compatibility, perceived usefulness and perceived ease of use significantly affected healthcare professional behavioral intent. MHS self-efficacy had strong indirect impact on healthcare professional behavioral intent through the mediators of perceived usefulness and perceived ease of use. Yet, the hypotheses for technical support and training effects on the perceived usefulness and perceived ease of use were not supported. This paper provides initial insights into factors that are likely to be significant antecedents of planning and implementing mobile healthcare to enhance professionals' MHS acceptance. The proposed model variables explained 70% of the variance in behavioral intention to use MHS; further study is needed to explore extra significant antecedents of new IT/IS acceptance for mobile healthcare. Such as privacy and security issue, system and information quality, limitations of mobile devices; the above may be other interesting factors for implementing mobile healthcare and could be conducted by qualitative research.

UGV acceptance testing

NASA Astrophysics Data System (ADS)

Kramer, Jeffrey A.; Murphy, Robin R.

2006-05-01

With over 100 models of unmanned vehicles now available for military and civilian safety, security or rescue applications, it is important to for agencies to establish acceptance testing. However, there appears to be no general guidelines for what constitutes a reasonable acceptance test. This paper describes i) a preliminary method for acceptance testing by a customer of the mechanical and electrical components of an unmanned ground vehicle system, ii) how it has been applied to a man-packable micro-robot, and iii) discusses the value of testing both to ensure that the customer has a workable system and to improve design. The test method automated the operation of the robot to repeatedly exercise all aspects and combinations of components on the robot for 6 hours. The acceptance testing process uncovered many failures consistent with those shown to occur in the field, showing that testing by the user does predict failures. The process also demonstrated that the testing by the manufacturer can provide important design data that can be used to identify, diagnose, and prevent long-term problems. Also, the structured testing environment showed that sensor systems can be used to predict errors and changes in performance, as well as uncovering unmodeled behavior in subsystems.

Translucency thresholds for dental materials.

PubMed

Salas, Marianne; Lucena, Cristina; Herrera, Luis Javier; Yebra, Ana; Della Bona, Alvaro; Pérez, María M

2018-05-12

To determine the translucency acceptability and perceptibility thresholds for dental resin composites using CIEDE2000 and CIELAB color difference formulas. A 30-observer panel performed perceptibility and acceptability judgments on 50 pairs of resin composites discs (diameter: 10mm; thickness: 1mm). Disc pair differences for the Translucency Parameter (ΔTP) were calculated using both color difference formulas (ΔTP 00 ranged from 0.11 to 7.98, and ΔTP ab ranged from 0.01 to 12.79). A Takagi-Sugeno-Kang (TSK) Fuzzy Approximation was used as fitting procedure. From the resultant fitting curves, the 95% confidence intervals were estimated and the 50:50% translucency perceptibility and acceptability thresholds (TPT and TAT) were calculated. Differences between thresholds were statistically analyzed using Student t tests (α=0.05). CIEDE2000 50:50% TPT was 0.62 and TAT was 2.62. Corresponding CIELAB values were 1.33 and 4.43, respectively. Translucency perceptibility and acceptability thresholds were significantly different using both color difference formulas (p=0.01 for TPT and p=0.005 for TAT). CIEDE2000 color difference formula provided a better data fit than CIELAB formula. The visual translucency difference thresholds determined with CIEDE2000 color difference formula can serve as reference values in the selection of resin composites and evaluation of its clinical performance. Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.

14 CFR 1274.505 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... performance, financial and technical resources or accessibility to other necessary resources. In certain... or performance required, including the range of acceptable characteristics or minimum acceptable...

Increasing the acceptance of internet-based mental health interventions in primary care patients with depressive symptoms. A randomized controlled trial.

PubMed

Ebert, D D; Berking, M; Cuijpers, P; Lehr, D; Pörtner, M; Baumeister, H

2015-05-01

Internet-based interventions (IBI) are effective in treating depression. However, uptake rates in routine care are still limited. Hence, this study aimed to (1) assess the acceptance of IBIs in primary care patients with depressive symptoms and to (2) examine the effects of a brief acceptance facilitating intervention in the form of an informational video on patients' acceptance of IBIs. Primary care patients (N=128) with Minor or Major Depression were randomly assigned to an intervention (IG) or control group (CG). Patients in the IG were shown a brief informational video about IBIs before receiving a questionnaire that assessed their acceptance of IBIs and other secondary outcomes. Patients of the CG filled out the questionnaire immediately. Baseline acceptance of IBIs in the CG was high for 6.3%, moderate for 53.1% and low for 40.6% of patients. Acceptance of IBIs was significantly higher in the IG when compared to the CG (d=.71, 95%-CI:.09-2.91). Except for social influence and the general attitude towards psychological treatment, all secondary outcomes were also significantly improved (e.g. effort- (d=.40) and performance-expectancy: d=.65; knowledge about Internet interventions d=.35). Depression of the participants was only assessed using a self-report measure (PHQ-9). Primary care patients' acceptance of IBIs for depressive symptoms was low but could be increased significantly using a brief acceptance facilitating intervention on the basis of an informational video. Future studies should further examine the potential of acceptance facilitating interventions for patients and health care providers to exploit the public health impact of IBIs. Copyright © 2015 Elsevier B.V. All rights reserved.

46 CFR 164.023-11 - Acceptance tests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Acceptance tests. 164.023-11 Section 164.023-11 Shipping...: SPECIFICATIONS AND APPROVAL MATERIALS Thread for Personal Flotation Devices § 164.023-11 Acceptance tests. (a) Performance testing. Manufacturers shall ensure that the performance tests described in § 164.023-7 (a) or (b...

Prospects for low wing-loading STOL transports with ride smoothing.

NASA Technical Reports Server (NTRS)

Holloway, R. B.; Thompson, G. O.; Rohling, W. J.

1972-01-01

Airplanes with low wing-loadings provide STOL capability without reliance on auxiliary propulsion or augmented lift, but require a ride smoothing control system to provide acceptable passenger comfort. A parametric study produced a configuration having a .35 thrust-to-weight ratio and a 50 psf wing loading, and which satisfied specified mission requirements and airworthiness standards. A ride-smoothing control system (RCS) synthesis was then performed which consisted of ride quality criteria definition, RCS concept trades, and analysis of RCS performance benefits at significant flight conditions. Within the limitations of the study it is concluded that this is a viable approach to STOL airplane design.

Process Hood Stand Support Steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

VAN KATWIJK, C.

2000-04-03

This package is written to comply with EN-6-035-00 for upgrade dedication of commercial grade items (CGI). The SNF-5953 CGI package provides the Technical evaluation to identify the critical characteristics and the acceptance criteria associated with the safety function of the Hood Stand Support Steel. Completion of the technical and quality requirements identified in the dedication package will provide enough data to be reasonably assured that CGI Hood Stand Support Steel will perform its SC function.

Influence of gender on office staff management in orthodontics.

PubMed

Holmes, Patrick B; Shroff, Bhavna; Best, Al M; Lindauer, Steven J

2010-11-01

To examine the gender differences in managing practice and staff members in orthodontic practices. All orthodontists in Virginia and Maryland (n = 427) were surveyed and demographic information was collected. For the crude analyses of the data, a Fisher's exact test or chi(2) test was performed. For the adjusted analyses, genders were compared using a logistic regression or analysis of covariance. The covariates were adjusted for age, program length, years in practice, number of years since graduation, and practice state. The length of the residency program attended did not differ with gender. No gender differences in practice ownership or creating the practice were observed. There was a significant gender difference in implementation of performance reviews: female orthodontists were more likely to provide performance reviews and tended to accept more poor reviews before staff termination than male orthodontists. However, when provided, no gender difference was observed in the number of performance reviews. Gender has a significant impact on the implementation of performance reviews in practices. Practice ownership status was not influenced by providers' gender.

Human Factors Process Task Analysis Liquid Oxygen Pump Acceptance Test Procedure for the Advanced Technology Development Center

NASA Technical Reports Server (NTRS)

Diorio, Kimberly A.

2002-01-01

A process task analysis effort was undertaken by Dynacs Inc. commencing in June 2002 under contract from NASA YA-D6. Funding was provided through NASA's Ames Research Center (ARC), Code M/HQ, and Industrial Engineering and Safety (IES). The John F. Kennedy Space Center (KSC) Engineering Development Contract (EDC) Task Order was 5SMA768. The scope of the effort was to conduct a Human Factors Process Failure Modes and Effects Analysis (HF PFMEA) of a hazardous activity and provide recommendations to eliminate or reduce the effects of errors caused by human factors. The Liquid Oxygen (LOX) Pump Acceptance Test Procedure (ATP) was selected for this analysis. The HF PFMEA table (see appendix A) provides an analysis of six major categories evaluated for this study. These categories include Personnel Certification, Test Procedure Format, Test Procedure Safety Controls, Test Article Data, Instrumentation, and Voice Communication. For each specific requirement listed in appendix A, the following topics were addressed: Requirement, Potential Human Error, Performance-Shaping Factors, Potential Effects of the Error, Barriers and Controls, Risk Priority Numbers, and Recommended Actions. This report summarizes findings and gives recommendations as determined by the data contained in appendix A. It also includes a discussion of technology barriers and challenges to performing task analyses, as well as lessons learned. The HF PFMEA table in appendix A recommends the use of accepted and required safety criteria in order to reduce the risk of human error. The items with the highest risk priority numbers should receive the greatest amount of consideration. Implementation of the recommendations will result in a safer operation for all personnel.

External quality assurance of HER2 fluorescence in situ hybridisation testing: results of a UK NEQAS pilot scheme

PubMed Central

Bartlett, John M S; Ibrahim, Merdol; Jasani, Bharat; Morgan, John M; Ellis, Ian; Kay, Elaine; Magee, Hilary; Barnett, Sarah; Miller, Keith

2007-01-01

Background and Aims Trastuzumab provides clinical benefit for advanced and early breast cancer patients whose tumours over‐express or have gene amplification of the HER2 oncogene. The UK National External Quality Assessment Scheme (NEQAS) for immunohistochemical testing was established to assess and improve the quality of HER2 immunohistochemical testing. However, until recently, no provision was available for HER2 fluorescence in situ hybridisation (FISH) testing. A pilot scheme was set up to review the performance of FISH testing in clinical diagnostic laboratories. Methods FISH was performed in 6 reference and 31 participating laboratories using a cell line panel with known HER2 status. Results Using results from reference laboratories as a criterion for acceptable performance, 60% of all results returned by participants were appropriate and 78% either appropriate or acceptable. However, 22.4% of results returned were deemed inappropriate, including 13 cases (4.2%) where a misdiagnosis would have been made had these been clinical specimens. Conclusions The results of three consecutive runs show that both reference laboratories and a proportion of routine clinical diagnostic (about 25%) centres can consistently achieve acceptable quality control of HER2 testing. Data from a significant proportion of participating laboratories show that further steps are required, including those taken via review of performance under schemes such as NEQAS, to improve quality of HER2 testing by FISH in the “real world”. PMID:16963466

Tidewater Community College Biennial Transfer Student Report, 1996-97 and 1997-98 Academic Years.

ERIC Educational Resources Information Center

Janicki, Heidi

This report provides an analysis of Tidewater Community College (TCC) (Virginia) students who transferred to a four-year institution in Virginia beginning in fall 1996 or 1997. The following topics are discussed: overview of the transfer process; acceptance and enrollment rates for each of the four-year institutions; performance of TCC graduates…

25 CFR 307.3 - Granting of licenses, contract, and bond requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... 307.3 Section 307.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO ALL-WOOL... acceptable to the Indian Arts and Crafts Board providing for the use of such certificates in conformity with... the Indian Arts and Crafts Board, in the amount of $500, conditioned upon faithful performance of such...

Examining a Web-Based Peer Feedback System in an Introductory Computer Literacy Course

ERIC Educational Resources Information Center

Adiguzel, Tufan; Varank, Ilhan; Erkoç, Mehmet Fatih; Buyukimdat, Meryem Koskeroglu

2017-01-01

This study focused on formative use of peer feedback in an online system that was used in basic computer literacy for word processing assignment-related purposes. Specifically, the effect of quantity, modality and satisfaction of peer feedback provided through the online system on students' performance, self-efficacy, and technology acceptance was…

Developing an Environment for Exploring Distributed Operations: A Wargaming Example

DTIC Science & Technology

2005-05-01

a basis for performance standards. At the same time, the design tried to provide an acceptable mix of structured versus free - play activity in...participants’ free - play discussion and collaboration during Counteraction. Scripting allowed the research team to embed potential problems or measurement...Learned - Structured Exercises ......................................................................... 24 Scripted and Free - Play Wargaming Phases

Accountability: Teaching through Assessment and Feedback, Not Grading

ERIC Educational Resources Information Center

Wormeli, Rick

2006-01-01

Grading policies such as refusing to accept late work, giving grades of zero, and refusing to allow students to redo their work may be intended as punishment for poor performance, but such policies will not really teach students to be accountable, and they provide very little useful information about students' mastery of the material. This article…

Using the Technology Acceptance Model (TAM) to Conduct an Analysis of User Perceptions

ERIC Educational Resources Information Center

Young, Cheryl E.

2010-01-01

Contractor performance evaluation enables agents to make informed purchasing decisions, provide feedback to contractors/vendors, and help improve service quality and customer satisfaction. However, both public and private organizations sometimes fail to do so, as is the case at a division of a government organization located in a northeastern U.S.…

SMS/GOES cell and battery data analysis report

NASA Technical Reports Server (NTRS)

Armantrout, J. D.

1977-01-01

The nickel-cadmium battery design developed for the Synchronous Meteorological Satellite (SMS) and Geostationary Operational Environmental Satellite (GOES) provided background and guidelines for future development, manufacture, and application of spacecraft batteries. SMS/GOES battery design, development, qualification testing, acceptance testing, and life testing/mission performance characteristics were evaluated for correlation with battery cell manufacturing process variables.

Linear and nonlinear schemes applied to pitch control of wind turbines.

PubMed

Geng, Hua; Yang, Geng

2014-01-01

Linear controllers have been employed in industrial applications for many years, but sometimes they are noneffective on the system with nonlinear characteristics. This paper discusses the structure, performance, implementation cost, advantages, and disadvantages of different linear and nonlinear schemes applied to the pitch control of the wind energy conversion systems (WECSs). The linear controller has the simplest structure and is easily understood by the engineers and thus is widely accepted by the industry. In contrast, nonlinear schemes are more complicated, but they can provide better performance. Although nonlinear algorithms can be implemented in a powerful digital processor nowadays, they need time to be accepted by the industry and their reliability needs to be verified in the commercial products. More information about the system nonlinear feature is helpful to simplify the controller design. However, nonlinear schemes independent of the system model are more robust to the uncertainties or deviations of the system parameters.

Nozzle Initiative Industry Advisory Committee on Standardization of Carbon-Phenolic Test Methods and Specifications

NASA Technical Reports Server (NTRS)

Bull, William B. (Compiler); Pinoli, Pat C. (Compiler); Upton, Cindy G. (Compiler); Day, Tony (Compiler); Hill, Keith (Compiler); Stone, Frank (Compiler); Hall, William B.

1994-01-01

This report is a compendium of the presentations of the 12th biannual meeting of the Industry Advisory Committee under the Solid Propulsion Integrity Program. A complete transcript of the welcoming talks is provided. Presentation outlines and overheads are included for the other sessions: SPIP Overview, Past, Current and Future Activity; Test Methods Manual and Video Tape Library; Air Force Developed Computer Aided Cure Program and SPC/TQM Experience; Magneto-Optical mapper (MOM), Joint Army/NASA program to assess composite integrity; Permeability Testing; Moisture Effusion Testing by Karl Fischer Analysis; Statistical Analysis of Acceptance Test Data; NMR Phenolic Resin Advancement; Constituent Testing Highlights on the LDC Optimization Program; Carbon Sulfur Study, Performance Related Testing; Current Rayon Specifications and Future Availability; RSRM/SPC Implementation; SRM Test Methods, Delta/Titan/FBM/RSRM; and Open Forum on Performance Based Acceptance Testing -- Industry Experience.

The transfer of analytical procedures.

PubMed

Ermer, J; Limberger, M; Lis, K; Wätzig, H

2013-11-01

Analytical method transfers are certainly among the most discussed topics in the GMP regulated sector. However, they are surprisingly little regulated in detail. General information is provided by USP, WHO, and ISPE in particular. Most recently, the EU emphasized the importance of analytical transfer by including it in their draft of the revised GMP Guideline. In this article, an overview and comparison of these guidelines is provided. The key to success for method transfers is the excellent communication between sending and receiving unit. In order to facilitate this communication, procedures, flow charts and checklists for responsibilities, success factors, transfer categories, the transfer plan and report, strategies in case of failed transfers, tables with acceptance limits are provided here, together with a comprehensive glossary. Potential pitfalls are described such that they can be avoided. In order to assure an efficient and sustainable transfer of analytical procedures, a practically relevant and scientifically sound evaluation with corresponding acceptance criteria is crucial. Various strategies and statistical tools such as significance tests, absolute acceptance criteria, and equivalence tests are thoroughly descibed and compared in detail giving examples. Significance tests should be avoided. The success criterion is not statistical significance, but rather analytical relevance. Depending on a risk assessment of the analytical procedure in question, statistical equivalence tests are recommended, because they include both, a practically relevant acceptance limit and a direct control of the statistical risks. However, for lower risk procedures, a simple comparison of the transfer performance parameters to absolute limits is also regarded as sufficient. Copyright © 2013 Elsevier B.V. All rights reserved.

Evaluation of the Acceptance of Audience Response System by Corporations Using the Technology Acceptance Model

NASA Astrophysics Data System (ADS)

Chu, Hsing-Hui; Lu, Ta-Jung; Wann, Jong-Wen

The purpose of this research is to explore enterprises' acceptance of Audience Response System (ARS) using Technology Acceptance Model (TAM). The findings show that (1) IT characteristics and facilitating conditions could be external variables of TAM. (2) The degree of E-business has positive significant correlation with behavioral intention of employees. (3) TAM is a good model to predict and explain IT acceptance. (4) Demographic variables, industry and firm characteristics have no significant correlation with ARS acceptance. The results provide useful information to managers and ARS providers that (1) ARS providers should focus more on creating different usages to enhance interactivity and employees' using intention. (2) Managers should pay attention to build sound internal facilitating conditions for introducing IT. (3) According to the degree of E-business, managers should set up strategic stages of introducing IT. (4) Providers should increase product promotion and also leverage academic and government to promote ARS.

Evaluating outcomes of computer-based classroom testing: Student acceptance and impact on learning and exam performance.

PubMed

Zheng, Meixun; Bender, Daniel

2018-03-13

Computer-based testing (CBT) has made progress in health sciences education. In 2015, the authors led implementation of a CBT system (ExamSoft) at a dental school in the U.S. Guided by the Technology Acceptance Model (TAM), the purposes of this study were to (a) examine dental students' acceptance of ExamSoft; (b) understand factors impacting acceptance; and (c) evaluate the impact of ExamSoft on students' learning and exam performance. Survey and focus group data revealed that ExamSoft was well accepted by students as a testing tool and acknowledged by most for its potential to support learning. Regression analyses showed that perceived ease of use and perceived usefulness of ExamSoft significantly predicted student acceptance. Prior CBT experience and computer skills did not significantly predict acceptance of ExamSoft. Students reported that ExamSoft promoted learning in the first program year, primarily through timely and rich feedback on examination performance. t-Tests yielded mixed results on whether students performed better on computerized or paper examinations. The study contributes to the literature on CBT and the application of the TAM model in health sciences education. Findings also suggest ways in which health sciences institutions can implement CBT to maximize its potential as an assessment and learning tool.

An Example of an INPRO Assessment of an INS in the Area of Waste Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allan, C.; Busurin, Y.; Depisch, F.

2006-07-01

Following a resolution of the General Conference of the IAEA in the year 2000 the International Project on Innovative Nuclear Reactors and Fuel Cycles, referred to as INPRO, was initiated. INPRO has defined requirements organized in a hierarchy of Basic Principles, User Requirements and Criteria (consisting of an indicator and an acceptance limit) to be met by innovative nuclear reactor systems (INS) in six areas, namely: economics, safety, waste management, environment, proliferation resistance, and infrastructure. If an INS meets all requirements in all areas it represents a sustainable system for the supply of energy, capable of making a significant contributionmore » to meeting the energy needs of the 21. century. Draft manuals have been developed, for each INPRO area, to provide guidance for performing an assessment of whether an INS meets the INPRO requirements in a given area. The manuals set out the information that needs to be assembled to perform an assessment and provide guidance on selecting the acceptance limits and, for a given INS, for determining the value of the indicators for comparison with the associated acceptance limits. Each manual also includes an example of a specific assessment to illustrate the guidance. This paper discusses the example presented in the manual for performing an INPRO assessment in the area of waste management. The example, chosen solely for the purpose of illustrating the INPRO methodology, describes an assessment of an INS based on the DUPIC fuel cycle. It is assumed that uranium is mined, milled, converted, enriched, and fabricated into LWR fuel in Canada. The LWR fuel is assumed to be leased to a utility in the USA. The spent LWR fuel is assumed to be returned to Canada where it is processed into CANDU DUPIC fuel, which is then burned in CANDU reactors. The assessment steps and the results are presented in detail in the paper. The example illustrates an assessment performed for an INS at an early stage of development. (authors)« less

Robust Control for The G-Limit Microgravity Vibration Isolation System

NASA Technical Reports Server (NTRS)

Whorton, Mark S.

2004-01-01

Many microgravity science experiments need an active isolation system to provide a sufficiently quiescent acceleration environment. The g-LIMIT vibration isolation system will provide isolation for Microgravity Science Glovebox experiments in the International Space Station. While standard control system technologies have been demonstrated for these applications, modern control methods have the potential for meeting performance requirements while providing robust stability in the presence of parametric uncertainties that are characteristic of microgravity vibration isolation systems. While H2 and H infinity methods are well established, neither provides the levels of attenuation performance and robust stability in a compensator with low order. Mixed H2/mu controllers provide a means for maximizing robust stability for a given level of mean-square nominal performance while directly optimizing for controller order constraints. This paper demonstrates the benefit of mixed norm design from the perspective of robustness to parametric uncertainties and controller order for microgravity vibration isolation. A nominal performance metric analogous to the mu measure for robust stability assessment is also introduced in order to define an acceptable trade space from which different control methodologies can be compared.

Block 4 solar cell module design and test specification for residential applications

NASA Technical Reports Server (NTRS)

1978-01-01

Near-term design, qualification and acceptance requirements are provided for terrestrial solar cell modules suitable for incorporation in photovoltaic power sources (2 kW to 10 kW) applied to single family residential installations. Requirement levels and recommended design limits for selected performance criteria are specified for modules intended principally for rooftop installations. Modules satisfying the requirements of this specification fall into one of two categories, residential panel or residential shingle, both meeting general performance requirements plus additional category peculiar constraints.

Extravehicular Activity/Air Traffic Control (EVA/ATC) test report. [communication links to the astronaut

NASA Technical Reports Server (NTRS)

Tomaro, D. J.

1982-01-01

During extravehicular activity (EVA), communications between the EVA astronaut and the space shuttle orbiter are maintained by means of transceiver installed in the environmental support system backpack. Onboard the orbiter, a transceiver line replaceable unit and its associated equipment performs the task of providing a communications link to the astronaut in the extravehicular activity/air traffic control (EVA/ATC) mode. Results of the acceptance tests that performed on the system designed and fabricated for EVA/ATC testing are discussed.

The AMS-02 Silicon Tracker

NASA Astrophysics Data System (ADS)

Haino, S.

2011-06-01

The Alpha Magnetic Spectrometer (AMS) is a large acceptance cosmic-ray detector which will be installed as an independent module on the International Space Station (ISS). The instrument will provide a precise measurement of the cosmic-ray energy spectra and extensive antimatter search up to several TeV for particle charges up to Z = 26. The spectrometer will be delivered to the ISS by STS-134 flight in February 2011. In August 2010 the calibration and performance evaluation of the spectrometer were performed with test beam at CERN.

Effects of performance feedback and coaching on the problem-solving process: Improving the integrity of implementation and enhancing student outcomes

NASA Astrophysics Data System (ADS)

Lundahl, Allison A.

Schools implementing Response to Intervention (RtI) procedures frequently engage in team problem-solving processes to address the needs of students who require intensive and individualized services. Because the effectiveness of the problem-solving process will impact the overall success of RtI systems, the present study was designed to learn more about how to strengthen the integrity of the problem-solving process. Research suggests that school districts must ensure high quality training and ongoing support to enhance the effectiveness, acceptability, and sustainability of the problem-solving process within an RtI model; however, there is a dearth of research examining the effectiveness of methods to provide this training and support. Consequently, this study investigated the effects of performance feedback and coaching strategies on the integrity with which teams of educators conducted the problem-solving process in schools. In addition, the relationships between problem-solving integrity, teacher acceptability, and student outcomes were examined. Results suggested that the performance feedback increased problem-solving procedural integrity across two of the three participating schools. Conclusions about the effectiveness of the (a) coaching intervention and (b) interventions implemented in the third school were inconclusive. Regression analyses indicated that the integrity with which the teams conducted the problem-solving process was a significant predictor of student outcomes. However, the relationship between problem-solving procedural integrity and teacher acceptability was not statistically significant.

Impact of pharmacy student interventions in an urban family medicine clinic.

PubMed

Ginzburg, Regina

2014-06-17

To determine the number of interventions made by pharmacy students at an urban family medicine clinic and the acceptance rate of these recommendations by the healthcare providers. The secondary objective was to investigate the cost avoidance value of the interventions. A prospective, unblinded study was conducted to determine the number and cost avoidance value of clinical interventions made by pharmacy students completing advanced pharmacy practice experiences (APPEs) in an urban family medicine clinic. Eighteen students completed this experience in the 8 months studied. Of the 718 interventions performed, 77% were accepted by physicians, including 58% of the 200 interventions that required immediate action. Projected avoidance was estimated at $61,855. The clinical interventions by pharmacy students were generally well received by healthcare providers and resulted in significant cost savings. Pharmacy students can play an important role in a family medicine clinic.

Optimizing Probability of Detection Point Estimate Demonstration

NASA Technical Reports Server (NTRS)

Koshti, Ajay M.

2017-01-01

Probability of detection (POD) analysis is used in assessing reliably detectable flaw size in nondestructive evaluation (NDE). MIL-HDBK-18231and associated mh18232POD software gives most common methods of POD analysis. Real flaws such as cracks and crack-like flaws are desired to be detected using these NDE methods. A reliably detectable crack size is required for safe life analysis of fracture critical parts. The paper provides discussion on optimizing probability of detection (POD) demonstration experiments using Point Estimate Method. POD Point estimate method is used by NASA for qualifying special NDE procedures. The point estimate method uses binomial distribution for probability density. Normally, a set of 29 flaws of same size within some tolerance are used in the demonstration. The optimization is performed to provide acceptable value for probability of passing demonstration (PPD) and achieving acceptable value for probability of false (POF) calls while keeping the flaw sizes in the set as small as possible.

Enzyme Reactions and Acceptability of Plant Foods.

ERIC Educational Resources Information Center

Palmer, James K.

1984-01-01

Provides an overview of enzyme reactions which contribute to the character and acceptability of plant foods. A detailed discussion of polyphenoloxidase is also provided as an example of an enzyme which can markedly affect the character and acceptability of such foods. (JN)

Heater Validation for the NEXT-C Hollow Cathodes

NASA Technical Reports Server (NTRS)

Verhey, Timothy R.; Soulas, George C.; Mackey, Jonathan Ar.

2017-01-01

Swaged cathode heaters whose design was successfully demonstrated under a prior flight project are to be provided by the NASA Glenn Research Center for the NEXT-C ion thruster being fabricated by Aerojet Rocketdyne. Extensive requalification activities were performed to validate process controls that had to be re-established or revised because systemic changes prevented reuse of the past approaches. A development batch of heaters was successfully fabricated based on the new process controls. Acceptance and cyclic life testing of multiple discharge and neutralizer sized heaters extracted from the development batch was initiated in August, 2016, with the last heater completing testing in April, 2017. Cyclic life testing results substantially exceeded the NEXT-C thruster requirement as well as all past experience for GRC fabricated units. The heaters demonstrated ultimate cyclic life capability of 19050 to 33500 cycles. A qualification batch of heaters is now being fabricated using the finalized process controls. A set of six heaters will be acceptance and cyclic tested to verify conformance to the behavior observed with the development heaters. The heaters for flight use will be then be provided to the contractor. This paper summarizes the fabrication process control activities and the acceptance and life testing of the development heater units.

Validation of the French version of the Acceptability E-scale (AES) for mental E-health systems.

PubMed

Micoulaud-Franchi, Jean-Arthur; Sauteraud, Alain; Olive, Jérôme; Sagaspe, Patricia; Bioulac, Stéphanie; Philip, Pierre

2016-03-30

Despite the increasing use of E-health systems for mental-health organizations, there is a lack of psychometric tools to evaluate their acceptability by patients with mental disorders. Thus, this study aimed to translate and validate a French version of the Acceptability E-scale (AES), a 6-item self-reported questionnaire that evaluates the extent to which patients find E-health systems acceptable. A forward-backward translation of the AES was performed. The psychometric properties of the French AES version, with construct validity, internal structural validity and external validity (Pearson's coefficient between AES scores and depression symptoms on the Beck Depression Inventory II) were analyzed. In a sample of 178 patients (mean age=46.51 years, SD=12.91 years), the validation process revealed satisfactory psychometric properties: factor analysis revealed two factors: "Satisfaction" (3 items) and "Usability" (3 items) and Cronbach's alpha was 0.7. No significant relation was found between AES scores and depression symptoms. The French version of the AES revealed a two-factor scale that differs from the original version. In line with the importance of acceptability in mental health and with a view to E-health systems for patients with mental disorders, the use of the AES in psychiatry may provide important information on acceptability (i.e., satisfaction and usability). Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Using simulation to test critical thinking skills of nursing students.

PubMed

Johannsson, S L; Wertenberger, D H

1996-10-01

The purpose of this pilot study was to evaluate the effectiveness of using simulations to test critical thinking ability of nursing students. Nine medical and surgical videotaped vignettes were selected from the critical thinking component of the Performance Based Development System (PBDS). Pathology, difficulty rating and the obviousness of cues varied between vignettes. Each student was rated as acceptable, partially acceptable or unacceptable in their ability to identify a problem and provide appropriate nursing interventions with rationale for each vignette. A paper and pencil exercise and interviews were used to validate findings obtained from the video simulations. The pros and cons of using video simulations to assess critical thinking abilities of nursing students are discussed.

A simple control for sediment-toxicity exposures using the amphipod, Hyalella azteca

USGS Publications Warehouse

Lasier, Peter J.; Urich, Matthew L.

2014-01-01

Sediment-toxicity exposures comparing survival and growth of the freshwater amphipod, Hyalella azteca, are often components of aquatic-habitat assessments. Standardized exposure methods have been established and require evaluations for quality assurance. Test acceptability using performance-based criteria can be determined from exposures to control sediments, which are collected from the environment or formulated from commercially available components. Amending sand with leached alfalfa solids provided a simple formulated sediment that elicited consistently acceptable survival and growth in 28-day exposures with and without a daily feeding regime. A procedure is described for preparing the sediment along with results from comparisons among sand, amended sand, and field-collected sediments that incorporated three feeding regimes.

Pay for performance: will dentistry follow?

PubMed

Voinea-Griffin, Andreea; Fellows, Jeffrey L; Rindal, Donald B; Barasch, Andrei; Gilbert, Gregg H; Safford, Monika M

2010-04-28

"Pay for performance" is an incentive system that has been gaining acceptance in medicine and is currently being considered for implementation in dentistry. However, it remains unclear whether pay for performance can effect significant and lasting changes in provider behavior and quality of care. Provider acceptance will likely increase if pay for performance programs reward true quality. Therefore, we adopted a quality-oriented approach in reviewing those factors which could influence whether it will be embraced by the dental profession. The factors contributing to the adoption of value-based purchasing were categorized according to the Donabedian quality of care framework. We identified the dental insurance market, the dental profession position, the organization of dental practice, and the dental patient involvement as structural factors influencing the way dental care is practiced and paid for. After considering variations in dental care and the early stage of development for evidence-based dentistry, the scarcity of outcome indicators, lack of clinical markers, inconsistent use of diagnostic codes and scarcity of electronic dental records, we concluded that, for pay for performance programs to be successfully implemented in dentistry, the dental profession and health services researchers should: 1) expand the knowledge base; 2) increase considerably evidence-based clinical guidelines; and 3) create evidence-based performance measures tied to existing clinical practice guidelines. In this paper, we explored factors that would influence the adoption of value-based purchasing programs in dentistry. Although none of these factors were essential deterrents for the implementation of pay for performance programs in medicine, the aggregate seems to indicate that significant changes are needed before this type of program could be considered a realistic option in dentistry.

Testing and validating environmental models

USGS Publications Warehouse

Kirchner, J.W.; Hooper, R.P.; Kendall, C.; Neal, C.; Leavesley, G.

1996-01-01

Generally accepted standards for testing and validating ecosystem models would benefit both modellers and model users. Universally applicable test procedures are difficult to prescribe, given the diversity of modelling approaches and the many uses for models. However, the generally accepted scientific principles of documentation and disclosure provide a useful framework for devising general standards for model evaluation. Adequately documenting model tests requires explicit performance criteria, and explicit benchmarks against which model performance is compared. A model's validity, reliability, and accuracy can be most meaningfully judged by explicit comparison against the available alternatives. In contrast, current practice is often characterized by vague, subjective claims that model predictions show 'acceptable' agreement with data; such claims provide little basis for choosing among alternative models. Strict model tests (those that invalid models are unlikely to pass) are the only ones capable of convincing rational skeptics that a model is probably valid. However, 'false positive' rates as low as 10% can substantially erode the power of validation tests, making them insufficiently strict to convince rational skeptics. Validation tests are often undermined by excessive parameter calibration and overuse of ad hoc model features. Tests are often also divorced from the conditions under which a model will be used, particularly when it is designed to forecast beyond the range of historical experience. In such situations, data from laboratory and field manipulation experiments can provide particularly effective tests, because one can create experimental conditions quite different from historical data, and because experimental data can provide a more precisely defined 'target' for the model to hit. We present a simple demonstration showing that the two most common methods for comparing model predictions to environmental time series (plotting model time series against data time series, and plotting predicted versus observed values) have little diagnostic power. We propose that it may be more useful to statistically extract the relationships of primary interest from the time series, and test the model directly against them.

Application of Design of Experiments and Surrogate Modeling within the NASA Advanced Concepts Office, Earth-to-Orbit Design Process

NASA Technical Reports Server (NTRS)

Zwack, Matthew R.; Dees, Patrick D.; Holt, James B.

2016-01-01

Decisions made during early conceptual design can have a profound impact on life-cycle cost (LCC). Widely accepted that nearly 80% of LCC is committed. Decisions made during early design must be well informed. Advanced Concepts Office (ACO) at Marshall Space Flight Center aids in decision making for launch vehicles. Provides rapid turnaround pre-phase A and phase A studies. Provides customer with preliminary vehicle sizing information, vehicle feasibility, and expected performance.

Determining your organization's 'risk capability'.

PubMed

Hannah, Bill; Hancock, Melinda

2014-05-01

An assessment of a provider's level of risk capability should focus on three key elements: Business intelligence, including sophisticated analytical models that can offer insight into the expected cost and quality of care for a given population. Clinical enterprise maturity, marked by the ability to improve health outcomes and to manage utilization and costs to drive change. Revenue transformation, emphasizing the need for a revenue cycle platform that allows for risk acceptance and management and that provides incentives for performance against defined objectives.

Strategic deployment. Two decades of experience provide important lessons on how to deploy emergency resources.

PubMed

Fitch, Jay

2002-02-01

When it comes to deployment, one size (approach) doesn't fit all. Progressive public safety and EMS systems will recognize that a successful plan can thoughtfully balance system performance and human needs. Inventive people who learned how to do things better, cheaper and faster built America. Providing optimum system coverage, improved response times and quality care for patients fits the same mold. Sophisticated and accountable EMS systems readily accept this as part of their mandate.

Understanding and enhancing user acceptance of computer technology

NASA Technical Reports Server (NTRS)

Rouse, William B.; Morris, Nancy M.

1986-01-01

Technology-driven efforts to implement computer technology often encounter problems due to lack of acceptance or begrudging acceptance of the personnel involved. It is argued that individuals' acceptance of automation, in terms of either computerization or computer aiding, is heavily influenced by their perceptions of the impact of the automation on their discretion in performing their jobs. It is suggested that desired levels of discretion reflect needs to feel in control and achieve self-satisfaction in task performance, as well as perceptions of inadequacies of computer technology. Discussion of these factors leads to a structured set of considerations for performing front-end analysis, deciding what to automate, and implementing the resulting changes.

ESGE-ESGENA technical specification for process validation and routine testing of endoscope reprocessing in washer-disinfectors according to EN ISO 15883, parts 1, 4, and ISO/TS 15883-5.

PubMed

Beilenhoff, Ulrike; Biering, Holger; Blum, Reinhard; Brljak, Jadranka; Cimbro, Monica; Dumonceau, Jean-Marc; Hassan, Cesare; Jung, Michael; Neumann, Christiane; Pietsch, Michael; Pineau, Lionel; Ponchon, Thierry; Rejchrt, Stanislav; Rey, Jean-François; Schmidt, Verona; Tillett, Jayne; van Hooft, Jeanin

2017-12-01

1 Prerequisites. The clinical service provider should obtain confirmation from the endoscope washer-disinfector (EWD) manufacturer that all endoscopes intended to be used can be reprocessed in the EWD. 2 Installation qualification. This can be performed by different parties but national guidelines should define who has the responsibilities, taking into account legal requirements. 3 Operational qualification. This should include parametric tests to verify that the EWD is working according to its specifications. 4 Performance qualification. Testing of cleaning performance, microbiological testing of routinely used endoscopes, and the quality of the final rinse water should be considered in all local guidelines. The extent of these tests depends on local requirements. According to the results of type testing performed during EWD development, other parameters can be tested if local regulatory authorities accept this. Chemical residues on endoscope surfaces should be searched for, if acceptable test methods are available. 5 Routine inspections. National guidelines should consider both technical and performance criteria. Individual risk analyses performed in the validation and requalification processes are helpful for defining appropriate test frequencies for routine inspections. © Georg Thieme Verlag KG Stuttgart · New York.

Disrupted Social Work Field Placement: Factors That Contribute to Premature Termination of BSW Students' Field Placement

ERIC Educational Resources Information Center

Tyler, Janet

2012-01-01

According to R. Wayne ("Legal Guidelines for Dismissing Students Because of Poor Performance in the Field," 2004), there is a widely accepted assumption in social work education that field placement provides the best opportunity to evaluate students' goodness-of-fit with the profession and is therefore used to weed out unsuitable…

Analysis of Source Selection Methods and Performance Outcomes: Lowest Price Technically Acceptable vs. Tradeoff in Air Force Acquisitions

DTIC Science & Technology

2015-12-01

issues. A weighted mean can be used in place of the grand mean3 and the STATA software automatically handles the assignment of the sums of squares. Thus...between groups (i.e., sphericity) using the multivariate test of means provided in STATA 12.1. This test checks whether or not population variances and

Review and Application of ASME NOG-1 and ASME NUM-1-2000

NASA Technical Reports Server (NTRS)

Lytle, Bradford P.; Delgado, H. (Technical Monitor)

2002-01-01

The intent of the workshop is to review the application of the ASME Nuclear Crane Standards ASME NOG-1 and ASME NUM-1-2000. The ASME Nuclear Crane standards provide a basis for purchasing overhead handling equipment with enhanced safety features, based upon accepted engineering principles, and including performance and environmental parameters specific to nuclear facilities.

[Care and acceptance of the elderly homeless person].

PubMed

Lohner, Marie-Christine

2012-01-01

Homeless people are even more vulnerable to the harsh conditions of life on the street when they are old and in poor health. Torn between respecting the individual's choice and performing its mission to provide care, the nursing team aims to find the most adapted solution. Seeking to convince without restraining it is guided by an attitude of care and concern.

13 CFR 124.504 - What circumstances limit SBA's ability to accept a procurement for award as an 8(a) contract?

Code of Federal Regulations, 2010 CFR

2010-01-01

... as provided in paragraph (c)(2) of this section, adverse impact does not apply to “new” requirements. A new requirement is one which has not been previously procured by the relevant procuring activity. (A) Where a requirement is new, no small business could have previously performed the requirement and...

Electronic adherence monitoring device performance and patient acceptability: a randomized control trial.

PubMed

Chan, Amy Hai Yan; Stewart, Alistair William; Harrison, Jeff; Black, Peter Nigel; Mitchell, Edwin Arthur; Foster, Juliet Michelle

2017-05-01

To investigate the performance and patient acceptability of an inhaler electronic monitoring device in a real-world childhood asthma population. Children 6 to 15 years presenting with asthma to the hospital emergency department and prescribed inhaled corticosteroids were included. Participants were randomized to receive a device with reminder features enabled or disabled for use with their preventer. Device quality control tests were conducted. Questionnaires on device acceptability, utility and ergonomics were completed at six months. A total of 1306 quality control tests were conducted; 84% passed pre-issue and 87% return testing. The most common failure reason was actuation under-recording. Acceptability scores were high, with higher scores in the reminder than non-reminder group (median, 5 th -95 th percentile: 4.1, 3.1-5.0 versus 3.7, 2.3-4.8; p < 0.001). Most (>90%) rated the device easy to use. Feedback was positive across five themes: device acceptability, ringtone acceptability, suggestions for improvement, effect on medication use, and effect on asthma control. This study investigates electronic monitoring device performance and acceptability in children using quantitative and qualitative measures. Results indicate satisfactory reliability, although failure rates of 13-16% indicate the importance of quality control. Favorable acceptability ratings support the use of these devices in children.

[External quality assessment in clinical biochemistry laboratories: pilot study in 11 laboratories of Lomé (Togo)].

PubMed

Kouassi, Kafui; Fétéké, Lochina; Assignon, Selom; Dorkenoo, Ameyo; Napo-Koura, Gado

2015-01-01

This study aims to evaluate the performance of a few biochemistry analysis and make recommendations to the place of the stakeholders. It is a cross-sectional study conducted between the October 1(st), 2012 and the July 31, 2013 bearing on the results of 5 common examinations of clinical biochemistry, provided by 11 laboratories volunteers opening in the public and private sectors. These laboratories have analysed during the 3 cycles, 2 levels (medium and high) of serum concentration of urea, glucose, creatinine and serum aminotransferases. The performance of laboratories have been determined from the acceptable limits corresponding to the limits of total errors, defined by the French Society of Clinical Biology (SFBC). A system of internal quality control is implemented by all laboratories and 45% of them participated in international programs of external quality assessment (EQA). The rate of acceptable results for the entire study was of 69%. There was a significant difference (p<0.002) between the performance of the group of laboratories engaged in a quality approach and the group with default implementation of the quality approach. Also a significant difference was observed between the laboratories of the central level and those of the peripheral level of our health system (p<0.047). The performance of the results provided by the laboratories remains relatively unsatisfactory. It is important that the Ministry of Health put in place a national program of EQA with mandatory participation.

A qualitative study of community perception and acceptance of biological larviciding for malaria mosquito control in rural Burkina Faso.

PubMed

Dambach, Peter; Jorge, Margarida Mendes; Traoré, Issouf; Phalkey, Revati; Sawadogo, Hélène; Zabré, Pascal; Kagoné, Moubassira; Sié, Ali; Sauerborn, Rainer; Becker, Norbert; Beiersmann, Claudia

2018-03-23

Vector and malaria parasite's rising resistance against pyrethroid-impregnated bed nets and antimalarial drugs highlight the need for additional control measures. Larviciding against malaria vectors is experiencing a renaissance with the availability of environmentally friendly and target species-specific larvicides. In this study, we analyse the perception and acceptability of spraying surface water collections with the biological larvicide Bacillus thuringiensis israelensis in a single health district in Burkina Faso. A total of 12 focus group discussions and 12 key informant interviews were performed in 10 rural villages provided with coverage of various larvicide treatments (all breeding sites treated, the most productive breeding sites treated, and untreated control). Respondents' knowledge about the major risk factors for malaria transmission was generally good. Most interviewees stated they performed personal protective measures against vector mosquitoes including the use of bed nets and sometimes mosquito coils and traditional repellents. The acceptance of larviciding in and around the villages was high and the majority of respondents reported a relief in mosquito nuisance and malarial episodes. There was high interest in the project and demand for future continuation. This study showed that larviciding interventions received positive resonance from the population. People showed a willingness to be involved and financially support the program. The positive environment with high acceptance for larviciding programs would facilitate routine implementation. An essential factor for the future success of such programs would be inclusion in regional or national malaria control guidelines.

Using a modified technology acceptance model in hospitals.

PubMed

Aggelidis, Vassilios P; Chatzoglou, Prodromos D

2009-02-01

The use of information technology in the health care sector and especially in hospitals offers great potential for improving the quality of services provided and the efficiency and effectiveness of the personnel, but also for reducing the organizational expenses. However, the main question that arises according to the literature is whether hospital personnel are willing to use state of the art information technology while performing their tasks. This study attempts to address this issue by developing and testing a modified technology acceptance model taking into consideration other relevant models found in the literature. The original TAM has been extended to include some exogenous variables in order to examine HIS acceptance by Greek hospital personnel. Correlation, explanatory and confirmation factor analysis was performed to test the reliability and validity of the measurement model. The structural equation modeling technique has also been used to evaluate the causal model. The results indicate that perceived usefulness, ease of use, social influence, attitude, facilitating conditions and self-efficacy significantly affect hospital personnel behavioral intention. Training has a strong indirect impact on behavioral intention through the mediators of facilitating condition and ease of use. Furthermore, the existence of significant positive effects between self-efficacy and social influence, perceived usefulness and anxiety, and facilitating conditions and social influence is also supported. The proposed model can explain 87% of the variance of behavioral intention indicating that the core constructs of the technology acceptance models have a strong and statistically significant influence on hospital personnel usage intention.

Comparison of acceptance, preference and efficacy between pressure anesthesia and classical needle infiltration anesthesia for dental restorative procedures in adult patients

PubMed Central

Makade, Chetana Sachin; Shenoi, Pratima R; Gunwal, Mohit K

2014-01-01

Introduction: Intraoral local anesthesia is essential for delivering dental care. Needless devices have been developed to provide anesthesia without injections. Little controlled research is available on its use in dental restorative procedures in adult patients. The aims of this study were to compare adult patients acceptability and preference for needleless jet injection with classical local infiltration as well as to evaluate the efficacy of the needleless anesthesia. Materials and Methods: Twenty non fearful adults with no previous experience of dental anesthesia were studied using split-mouth design. The first procedure was performed with classical needle infiltration anesthesia. The same amount of anesthetic solution was administered using MADA jet needleless device in a second session one week later, during which a second dental restorative procedure was performed. Patients acceptance was assessed using Universal pain assessment tool while effectiveness was recorded using soft tissue anesthesia and pulpal anesthesia. Patients reported their preference for the anesthetic method at the third visit. The data was evaluated using chi square test and student's t-test. Results: Pressure anesthesia was more accepted and preferred by 70% of the patients than traditional needle anesthesia (20%). Both needle and pressure anesthesia was equally effective for carrying out the dental procedures. Conclusion: Patients experienced significantly less pain and fear (p<0.01) during anesthetic procedure with pressure anesthesia. However, for more invasive procedures needle anesthesia will be more effective. PMID:24778516

Comparison of Different Scoring Systems Based on Both Donor and Recipient Characteristics for Predicting Outcome after Living Donor Liver Transplantation.

PubMed

Ma, Yucheng; Wang, Qing; Yang, Jiayin; Yan, Lunan

2015-01-01

In order to provide a good match between donor and recipient in liver transplantation, four scoring systems [the product of donor age and Model for End-stage Liver Disease score (D-MELD), the score to predict survival outcomes following liver transplantation (SOFT), the balance of risk score (BAR), and the transplant risk index (TRI)] based on both donor and recipient parameters were designed. This study was conducted to evaluate the performance of the four scores in living donor liver transplantation (LDLT) and compare them with the MELD score. The clinical data of 249 adult patients undergoing LDLT in our center were retrospectively evaluated. The area under the receiver operating characteristic curves (AUCs) of each score were calculated and compared at 1-, 3-, 6-month and 1-year after LDLT. The BAR at 1-, 3-, 6-month and 1-year after LDLT and the D-MELD and TRI at 1-, 3- and 6-month after LDLT showed acceptable performances in the prediction of survival (AUC>0.6), while the SOFT showed poor discrimination at 6-month after LDLT (AUC = 0.569). In addition, the D-MELD and BAR displayed positive correlations with the length of ICU stay (D-MELD, p = 0.025; BAR, p = 0.022). The SOFT was correlated with the time of mechanical ventilation (p = 0.022). The D-MELD, BAR and TRI provided acceptable performance in predicting survival after LDLT. However, even though these scoring systems were based on both donor and recipient parameters, only the BAR provided better performance than the MELD in predicting 1-year survival after LDLT.

Comparison of Different Scoring Systems Based on Both Donor and Recipient Characteristics for Predicting Outcome after Living Donor Liver Transplantation

PubMed Central

2015-01-01

Background and Objectives In order to provide a good match between donor and recipient in liver transplantation, four scoring systems [the product of donor age and Model for End-stage Liver Disease score (D-MELD), the score to predict survival outcomes following liver transplantation (SOFT), the balance of risk score (BAR), and the transplant risk index (TRI)] based on both donor and recipient parameters were designed. This study was conducted to evaluate the performance of the four scores in living donor liver transplantation (LDLT) and compare them with the MELD score. Patients and Methods The clinical data of 249 adult patients undergoing LDLT in our center were retrospectively evaluated. The area under the receiver operating characteristic curves (AUCs) of each score were calculated and compared at 1-, 3-, 6-month and 1-year after LDLT. Results The BAR at 1-, 3-, 6-month and 1-year after LDLT and the D-MELD and TRI at 1-, 3- and 6-month after LDLT showed acceptable performances in the prediction of survival (AUC>0.6), while the SOFT showed poor discrimination at 6-month after LDLT (AUC = 0.569). In addition, the D-MELD and BAR displayed positive correlations with the length of ICU stay (D-MELD, p = 0.025; BAR, p = 0.022). The SOFT was correlated with the time of mechanical ventilation (p = 0.022). Conclusion The D-MELD, BAR and TRI provided acceptable performance in predicting survival after LDLT. However, even though these scoring systems were based on both donor and recipient parameters, only the BAR provided better performance than the MELD in predicting 1-year survival after LDLT. PMID:26378786

The relationship between motor performance and peer relations in 9- to 12-year-old children.

PubMed

Livesey, D; Lum Mow, M; Toshack, T; Zheng, Y

2011-07-01

Poor motor skills have been associated with peer relationship difficulties, with lower peer preference and greater likelihood of suffering from withdrawal and low self-worth. Most research into these relationships has focused upon children with motor problems and on activities involving physical skills (play/sport). The current study examined the link between motor performance and peer relations in 9- to 12-year-old children in both physical and non-physical (schoolwork) settings using a community sample. Participants were 192 school children whose motor performance was tested using the Movement Assessment Battery for Children. Peer acceptance was assessed using the Peer Rating Scale and teachers completed the Peer Exclusion subscale of the Child Behaviour Scale to indicate each child's peer status. Children were also asked to indicate their level of physical activity and their perceived freedom in leisure using self-report questionnaires. Children with poor motor performance had lower levels of physical activity, and freedom in leisure and were less preferred by their peers in both play and classroom settings. These effects were stronger for boys than for girls. Teacher indicated that children with poorer motor skills experienced higher levels of peer rejection in the classroom setting. When motor performance was separated into fine- and gross-motor performance it was found that only the latter was significantly correlated with peer acceptance in the play context but that fine-motor skills contributed significantly to variance in teacher ratings of peer exclusion in the classroom setting. The results support and extend earlier findings that children with poor motor performance are less accepted by their peers in play settings and provide some support for this extending to settings involving low levels of physical activity (classroom settings). The results similarly support previous findings that motor performance is associated with perceived freedom in leisure and with the likelihood of participating in active pursuits. © 2010 Blackwell Publishing Ltd.

SUPERFUND INNOVATIVE TECHNOLOGIES EVALUATION ...

EPA Pesticide Factsheets

This task seeks to identify high priority needs of the Regions and Program Offices for innovative field sampling, characterization, monitoring, and measurement technologies. When an appropriate solution to a specific problem is identified, a field demonstration is conducted to document the performance and cost of the proposed technologies. The use of field analysis almost always provides a savings in time and cost over the usual sample and ship to a conventional laboratory for analysis approach to site characterization and monitoring. With improvements in technology and appropriate quality assurance/quality control, field analysis has been shown to provide high quality data, useful for most environmental monitoring or characterization projects. An emphasis of the program is to seek out innovative solutions to existing problems and to provide the cost and performance data a user would require to make an informed decision regarding the adequacy of a technology to address a specific environmental problem. The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented performance and cost data obtained from field demonstrations.

Estimation of Streamflow Characteristics for Charles M. Russell National Wildlife Refuge, Northeastern Montana

USGS Publications Warehouse

Sando, Steven K.; Morgan, Timothy J.; Dutton, DeAnn M.; McCarthy, Peter M.

2009-01-01

Charles M. Russell National Wildlife Refuge (CMR) encompasses about 1.1 million acres (including Fort Peck Reservoir on the Missouri River) in northeastern Montana. To ensure that sufficient streamflow remains in the tributary streams to maintain the riparian corridors, the U.S. Fish and Wildlife Service is negotiating water-rights issues with the Reserved Water Rights Compact Commission of Montana. The U.S. Geological Survey, in cooperation with the U.S. Fish and Wildlife Service, conducted a study to gage, for a short period, selected streams that cross CMR, and analyze data to estimate long-term streamflow characteristics for CMR. The long-term streamflow characteristics of primary interest include the monthly and annual 90-, 80-, 50-, and 20-percent exceedance streamflows and mean streamflows (Q.90, Q.80, Q.50, Q.20, and QM, respectively), and the 1.5-, 2-, and 2.33- year peak flows (PK1.5, PK2, and PK2.33, respectively). The Regional Adjustment Relationship (RAR) was investigated for estimating the monthly and annual Q.90, Q.80, Q.50, Q.20, and QM, and the PK1.5, PK2, and PK2.33 for the short-term CMR gaging stations (hereinafter referred to as CMR stations). The RAR was determined to provide acceptable results for estimating the long-term Q.90, Q.80, Q.50, Q.20, and QM on a monthly basis for the months of March through June, and also on an annual basis. For the months of September through January, the RAR regression equations did not provide acceptable results for any long-term streamflow characteristic. For the month of February, the RAR regression equations provided acceptable results for the long-term Q.50 and QM, but poor results for the long-term Q.90, Q.80, and Q.20. For the months of July and August, the RAR provided acceptable results for the long-term Q.50, Q.20, and QM, but poor results for the long-term Q.90 and Q.80. Estimation coefficients were developed for estimating the long-term streamflow characteristics for which the RAR did not provide acceptable results. The RAR also was determined to provide acceptable results for estimating the PK1.5., PK2, and PK2.33 for the three CMR stations that lacked suitable peak-flow records. Methods for estimating streamflow characteristics at ungaged sites also were derived. Regression analyses that relate individual streamflow characteristics to various basin and climatic characteristics for gaging stations were performed to develop regression equations to estimate streamflow characteristics at ungaged sites. Final equations for the annual Q.50, Q.20, and QM are reported. Acceptable equations also were developed for estimating QM for the months of February, March, April, June, and July, and Q.50, Q.20, and QM on an annual basis. However, equations for QM for the months of February, March, April, June, and July were determined to be less consistent and reliable than the use of estimation coefficients applied to the regression equation results for the annual QM. Acceptable regression equations also were developed for the PK1.5, PK2, and PK2.33.

Variation in Aptitude of Trainees in Endoscopic Ultrasonography, Based on Cumulative Sum Analysis

PubMed Central

Wani, Sachin; Hall, Matthew; Keswani, Rajesh N.; Aslanian, Harry R.; Casey, Brenna; Burbridge, Rebecca; Chak, Amitabh; Chen, Ann M.; Cote, Gregory; Edmundowicz, Steven A.; Faulx, Ashley L.; Hollander, Thomas G.; Lee, Linda S.; Mullady, Daniel; Murad, Faris; Muthusamy, Raman; Pfau, Patrick R.; Scheiman, James M.; Tokar, Jeffrey; Wagh, Mihir S.; Watson, Rabindra; Early, Dayna

2017-01-01

BACKGROUND & AIMS Studies have reported substantial variation in the competency of advanced endoscopy trainees, indicating a need for more supervised training in endoscopic ultrasound (EUS). We used a standardized, validated, data collection tool to evaluate learning curves and measure competency in EUS among trainees at multiple centers. METHODS In a prospective study performed at 15 centers, 17 trainees with no prior EUS experience were evaluated by experienced attending endosonographers at the 25th and then every 10th upper EUS examination, over a 12-month training period. A standardized data collection form was used (using a 5-point scoring system) to grade the EUS examination. Cumulative sum analysis was applied to produce a learning curve for each trainee; it tracked the overall performance based on median scores at different stations and also at each station. Competency was defined by a median score of 1, with acceptable and unacceptable failure rates of 10% and 20%, respectively. RESULTS Twelve trainees were included in the final analysis. Each of the trainees performed 265 to 540 EUS examinations (total, 4257 examinations). There was a large amount of variation in their learning curves: 2 trainees crossed the threshold for acceptable performance (at cases 225 and 245), 2 trainees had a trend toward acceptable performance (after 289 and 355 cases) but required continued observation, and 8 trainees needed additional training and observation. Similar results were observed at individual stations. CONCLUSIONS A specific case load does not ensure competency in EUS; 225 cases should be considered the minimum caseload for training because we found that no trainee achieved competency before this point. Ongoing training should be provided for trainees until competency is confirmed using objective measures. PMID:25460557

Variation in Aptitude of Trainees in Endoscopic Ultrasonography, Based on Cumulative Sum Analysis.

PubMed

Wani, Sachin; Hall, Matthew; Keswani, Rajesh N; Aslanian, Harry R; Casey, Brenna; Burbridge, Rebecca; Chak, Amitabh; Chen, Ann M; Cote, Gregory; Edmundowicz, Steven A; Faulx, Ashley L; Hollander, Thomas G; Lee, Linda S; Mullady, Daniel; Murad, Faris; Muthusamy, V Raman; Pfau, Patrick R; Scheiman, James M; Tokar, Jeffrey; Wagh, Mihir S; Watson, Rabindra; Early, Dayna

2015-07-01

Studies have reported substantial variation in the competency of advanced endoscopy trainees, indicating a need for more supervised training in endoscopic ultrasound (EUS). We used a standardized, validated, data collection tool to evaluate learning curves and measure competency in EUS among trainees at multiple centers. In a prospective study performed at 15 centers, 17 trainees with no prior EUS experience were evaluated by experienced attending endosonographers at the 25th and then every 10th upper EUS examination, over a 12-month training period. A standardized data collection form was used (using a 5-point scoring system) to grade the EUS examination. Cumulative sum analysis was applied to produce a learning curve for each trainee; it tracked the overall performance based on median scores at different stations and also at each station. Competency was defined by a median score of 1, with acceptable and unacceptable failure rates of 10% and 20%, respectively. Twelve trainees were included in the final analysis. Each of the trainees performed 265 to 540 EUS examinations (total, 4257 examinations). There was a large amount of variation in their learning curves: 2 trainees crossed the threshold for acceptable performance (at cases 225 and 245), 2 trainees had a trend toward acceptable performance (after 289 and 355 cases) but required continued observation, and 8 trainees needed additional training and observation. Similar results were observed at individual stations. A specific case load does not ensure competency in EUS; 225 cases should be considered the minimum caseload for training because we found that no trainee achieved competency before this point. Ongoing training should be provided for trainees until competency is confirmed using objective measures. Copyright © 2015 AGA Institute. Published by Elsevier Inc. All rights reserved.

77 FR 51880 - Requirements for Maintenance of Inspections, Tests, Analyses, and Acceptance Criteria

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... Maintenance of Inspections, Tests, Analyses, and Acceptance Criteria AGENCY: Nuclear Regulatory Commission... construction activities through inspections, tests, analyses, and acceptance criteria (ITAAC) under a combined... inspections, tests, or analyses were performed as required, or that acceptance criteria are met, and to notify...

Team-based assessment of professional behavior in medical students.

PubMed

Raee, Hojat; Amini, Mitra; Momen Nasab, Ameneh; Malek Pour, Abdolrasoul; Jafari, Mohammad Morad

2014-07-01

Self and peer assessment provides important information about the individual's performance and behavior in all aspects of their professional environment work. The aim of this study is to evaluate the professional behavior and performance in medical students in the form of team based assessment. In a cross-sectional study, 100 medical students in the 7(th) year of education were randomly selected and enrolled; for each student five questionnaires were filled out, including one self-assessment, two peer assessments and two residents assessment. The scoring system of the questionnaires was based on seven point Likert scale.  After filling out the questions in the questionnaire, numerical data and written comments provided to the students were collected, analyzed and discussed. Internal consistency (Cronbach's alpha) of the questionnaires was assessed. A p<0.05 was considered as significant level. Internal consistency was acceptable (Cronbach's alpha 0.83). Interviews revealed that the majority of students and assessors interviewed found the method acceptable. The range of scores was 1-6 (Mean±SD=4.39±0.57) for the residents' assessment, 2-6 (Mean±SD= 4.49±0.53) for peer assessment, and 3-7 (Mean±SD=5.04±0.32) for self-assessment. There was a significant difference between self assessment and other methods of assessment. This study demonstrates that a team-based assessment is an acceptable and feasible method for peer and self-assessment of medical students' learning in a clinical clerkship, and has some advantages over traditional assessment methods. Further studies are needed to focus on the strengths and weaknesses.

Using Predictive Evaluation to Design, Evaluate, and Improve Training for Polio Volunteers

PubMed Central

Traicoff, Denise A.; Basarab, Dave; Ehrhardt, Derek T.; Brown, Sandi; Celaya, Martin; Jarvis, Dennis; Howze, Elizabeth H.

2018-01-01

Background Predictive Evaluation (PE) uses a four-step process to predict results then designs and evaluates a training intervention accordingly. In 2012, the Sustainable Management Development Program (SMDP) at the Centers for Disease Control and Prevention used PE to train Stop Transmission of Polio (STOP) program volunteers. Methods Stakeholders defined specific beliefs and practices that volunteers should demonstrate. These predictions and adult learning practices were used to design a curriculum to train four cohorts. At the end of each workshop, volunteers completed a beliefs survey and wrote goals for intended actions. The goals were analyzed for acceptability based on four PE criteria. The percentage of acceptable goals and the beliefs survey results were used to define the quality of the workshop. A postassignment adoption evaluation was conducted for two cohorts, using an online survey and telephone or in-person structured interviews. The results were compared with the end of workshop findings. Results The percentage of acceptable goals across the four cohorts ranged from 49% to 85%. In the adoption evaluation of two cohorts, 88% and 94% of respondents reported achieving or making significant progress toward their goal. A comparison of beliefs survey responses across the four cohorts indicated consistencies in beliefs that aligned with stakeholders’ predictions. Conclusions Goal statements that participants write at the end of a workshop provide data to evaluate training quality. Beliefs surveys surface attitudes that could help or hinder workplace performance. The PE approach provides an innovative framework for health worker training and evaluation that emphasizes performance. PMID:29457126

Is it time to turn our attention toward central mechanisms for post-exertional recovery strategies and performance?

PubMed Central

Rattray, Ben; Argus, Christos; Martin, Kristy; Northey, Joseph; Driller, Matthew

2015-01-01

Key Points Central fatigue is accepted as a contributor to overall athletic performance, yet little research directly investigates post-exercise recovery strategies targeting the brainCurrent post-exercise recovery strategies likely impact on the brain through a range of mechanisms, but improvements to these strategies is neededResearch is required to optimize post-exercise recovery with a focus on the brain Post-exercise recovery has largely focused on peripheral mechanisms of fatigue, but there is growing acceptance that fatigue is also contributed to through central mechanisms which demands that attention should be paid to optimizing recovery of the brain. In this narrative review we assemble evidence for the role that many currently utilized recovery strategies may have on the brain, as well as potential mechanisms for their action. The review provides discussion of how common nutritional strategies as well as physical modalities and methods to reduce mental fatigue are likely to interact with the brain, and offer an opportunity for subsequent improved performance. We aim to highlight the fact that many recovery strategies have been designed with the periphery in mind, and that refinement of current methods are likely to provide improvements in minimizing brain fatigue. Whilst we offer a number of recommendations, it is evident that there are many opportunities for improving the research, and practical guidelines in this area. PMID:25852568

A knowledge based search tool for performance measures in health care systems.

PubMed

Beyan, Oya D; Baykal, Nazife

2012-02-01

Performance measurement is vital for improving the health care systems. However, we are still far from having accepted performance measurement models. Researchers and developers are seeking comparable performance indicators. We developed an intelligent search tool to identify appropriate measures for specific requirements by matching diverse care settings. We reviewed the literature and analyzed 229 performance measurement studies published after 2000. These studies are evaluated with an original theoretical framework and stored in the database. A semantic network is designed for representing domain knowledge and supporting reasoning. We have applied knowledge based decision support techniques to cope with uncertainty problems. As a result we designed a tool which simplifies the performance indicator search process and provides most relevant indicators by employing knowledge based systems.

Western Cape Primary Care Assessment Tool (PCAT) study: Measuring primary care organisation and performance in the Western Cape Province, South Africa (2013)

PubMed Central

Sayed, Abdul-Rauf; le Grange, Cynthia; Bhagwan, Susheela; Manga, Nayna; Hellenberg, Derek

2016-01-01

Background Major health sector reform and the need for baseline measures of performance to determine impact. Aim Baseline audit of primary healthcare (PHC) performance. Setting Cape Town and Cape Winelands (rural) PHC facilities (PCFs) in Western Cape Province, South Africa. Method The South African cross-culturally validated ZA PCAT to audit PHC performance on 11 subdomains associated with improved health and reduced costs. Adult PCF users systematically sampled. All full-time doctors and nurse practitioners in PCFs sampled and all PCF managers in sub-districts sampled invited into the study. Results Data from 1432 users, 100 clinicians and 64 managers from 13 PCFs in 10 sub-districts analysed (figures show stakeholder percentages scoring subdomain performance ‘acceptable to good’). 11.5% users scored access ‘acceptable to good’; community orientation and comprehensive services provided 20.8% and 39.9%, respectively. Total PHC score for users 50.2%; for managers and practitioners 82.8% and 88.0%, respectively. Among practitioners access was lowest (33.3%); PHC team (98.0%) and comprehensive services available (100.0%) highest. Among managers, access (13.5%) and family centredness (45.6%) are lowest; PHC team (85.9%) and comprehensive services available (90.6%) highest. Managers scored access, family centredness and cultural competence significantly lower than practitioners. Users scored comprehensive services available, comprehensive services provided and community orientation significantly lower than practitioners and managers. Conclusion Gaps between users’ experience and providers’ assessments of PHC performance are identified. Features that need strengthening and alignment with best practice, provincial and national, and health policies are highlighted with implications for practitioner and manager training, health policy, and research. PMID:27247157

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Jungho; Shi, Xianbo; Casa, Diego

Advances in resonant inelastic X-ray scattering (RIXS) have come in lockstep with improvements in energy resolution. Currently, the best energy resolution at the IrL 3-edge stands at ~25 meV, which is achieved using a diced Si(844) spherical crystal analyzer. However, spherical analyzers are limited by their intrinsic reflection width. A novel analyzer system using multiple flat crystals provides a promising way to overcome this limitation. For the present design, an energy resolution at or below 10 meV was selected. Recognizing that the angular acceptance of flat crystals is severely limited, a collimating element is essential to achieve the necessary solid-anglemore » acceptance. For this purpose, a laterally graded, parabolic, multilayer Montel mirror was designed for use at the IrL 3-absorption edge. It provides an acceptance larger than 10 mrad, collimating the reflected X-ray beam to smaller than 100 µrad, in both vertical and horizontal directions. The performance of this mirror was studied at beamline 27-ID at the Advanced Photon Source. X-rays from a diamond (111) monochromator illuminated a scattering source of diameter 5 µm, generating an incident beam on the mirror with a well determined divergence of 40 mrad. A flat Si(111) crystal after the mirror served as the divergence analyzer. From X-ray measurements, ray-tracing simulations and optical metrology results, it was established that the Montel mirror satisfied the specifications of angular acceptance and collimation quality necessary for a high-resolution RIXS multi-crystal analyzer system.« less

Willingness to Accept HIV Pre-Exposure Prophylaxis among Chinese Men Who Have Sex with Men

PubMed Central

Li, Shuming; Li, Dongliang; Zhang, Lifen; Fan, Wensheng; Yang, Xueying; Yu, Mingrun; Xiao, Dong; Yan, Li; Zhang, Zheng; Shi, Wei; Luo, Fengji; Ruan, Yuhua; Jin, Qi

2012-01-01

Objective We investigated the awareness and acceptability of pre-exposure prophylaxis (PrEP) among men who have sex with men (MSM) and potential predicting factors. Methods This study was conducted among MSM in Beijing, China. Study participants, randomly selected from an MSM cohort, completed a structured questionnaire, and provided their blood samples to test for HIV infection and syphilis. Univariate logistic regression analyses were performed to evaluate the factors associated with willingness to accept (WTA) PrEP. Factors independently associated with willingness to accept were identified by entering variables into stepwise logistic regression analysis. Results A total of 152 MSM completed the survey; 11.2% had ever heard of PrEP and 67.8% were willing to accept it. Univariate analysis showed that age, years of education, consistent condom use in the past 6 months, heterosexual behavior in the past 6 months, having ever heard of PrEP and the side effects of antiretroviral drugs, and worry about antiretroviral drugs cost were significantly associated with willingness to accept PrEP. In the multivariate logistic regression model, only consistent condom use in the past 6 months (odds ratio [OR]: 0.31; 95% confidence interval [CI]: 0.13–0.70) and having ever heard of the side effects of antiretroviral drugs (OR: 0.30; 95% CI: 0.14–0.67) were independently associated with willingness to accept PrEP. Conclusions The awareness of PrEP in the MSM population was low. Sexual behavioral characteristics and knowledge about ART drugs may have effects on willingness to accept PrEP. Comprehensive prevention strategies should be recommended in the MSM community. PMID:22479320

Group 3: Performance evaluation and assessment

NASA Technical Reports Server (NTRS)

Frink, A.

1981-01-01

Line-oriented flight training provides a unique learning experience and an opportunity to look at aspects of performance other types of training did not provide. Areas such as crew coordination, resource management, leadership, and so forth, can be readily evaluated in such a format. While individual performance is of the utmost importance, crew performance deserves equal emphasis, therefore, these areas should be carefully observed by the instructors as an rea for discussion in the same way that individual performane is observed. To be effective, it must be accepted by the crew members, and administered by the instructors as pure training-learning through experience. To keep open minds, to benefit most from the experience, both in the doing and in the follow-on discussion, it is essential that it be entered into with a feeling of freedom, openness, and enthusiasm. Reserve or defensiveness because of concern for failure must be inhibit participation.

5 CFR 531.409 - Acceptable level of competence determinations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Acceptable level of competence... REGULATIONS PAY UNDER THE GENERAL SCHEDULE Within-Grade Increases § 531.409 Acceptable level of competence... delegated shall determine which employees are performing at an acceptable level of competence. (b) Basis for...

46 CFR 164.013-5 - Acceptance tests.

Code of Federal Regulations, 2013 CFR

2013-10-01

... described in UL 1191, as appropriate, are performed on a minimum of five samples in each of the lightest and darkest colors submitted for acceptance by a recognized laboratory accepted under § 164.019. ...

46 CFR 164.013-5 - Acceptance tests.

Code of Federal Regulations, 2012 CFR

2012-10-01

... described in UL 1191, as appropriate, are performed on a minimum of five samples in each of the lightest and darkest colors submitted for acceptance by a recognized laboratory accepted under § 164.019. ...

46 CFR 164.013-5 - Acceptance tests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... described in UL 1191, as appropriate, are performed on a minimum of five samples in each of the lightest and darkest colors submitted for acceptance by a recognized laboratory accepted under § 164.019. ...

Aircraft Maintenance Engineering: Factors Impacting Airlines E-Maintenance Technologies, Authoring and Illustrations

NASA Astrophysics Data System (ADS)

Karayianes, Frank

The purpose of this research was to evaluate factors influencing acceptance and use of technologies in the field of aircraft maintenance authoring, graphics, and documentation. Maintenance engineering authors convert complex engineering used in aircraft production and transform that data using technology (tools) into usable technical publications data. While the current literature includes a large volume of research in technology acceptance in various domains of industry and business, the problem is that no such studies exist with respect to the aircraft maintenance engineering authoring, allowing any number of tools to be used and acceptance to be unsure. The study was based on theoretical approaches of the Technology Acceptance Model and the associated hypothesis related to eight research questions. A survey questionnaire was developed for data collection from a selected population of aircraft maintenance engineering authors. Data collected from 148 responses were exposed to a range of statistical methods and analyses. Analysis of data were performed within the structural equation model using exploratory factor analysis, confirmatory factor analysis, and a range of regression methods. The analyses generally provided results consistent with prior literature. Two survey questions yielded unexpected results contrary to similar studies. The relationship between prior experience and job level did not show a significant relationship with perceived usefulness or perceived ease of use. Other results included the significant relationship between Perceived Usefulness and Perceived Ease of Use with Technology acceptance. Recommendations include understanding how Technology Acceptance can be improved for the industry and the need for further research not covered to refine recommendations for technology acceptance related to the aviation industry.

Trust in smart systems: sharing driving goals and giving information to increase trustworthiness and acceptability of smart systems in cars.

PubMed

Verberne, Frank M F; Ham, Jaap; Midden, Cees J H

2012-10-01

We examine whether trust in smart systems is generated analogously to trust in humans and whether the automation level of smart systems affects trustworthiness and acceptability of those systems. Trust is an important factor when considering acceptability of automation technology. As shared goals lead to social trust, and intelligent machines tend to be treated like humans, the authors expected that shared driving goals would also lead to increased trustworthiness and acceptability of adaptive cruise control (ACC) systems. In an experiment, participants (N = 57) were presented with descriptions of three ACCs with different automation levels that were described as systems that either shared their driving goals or did not. Trustworthiness and acceptability of all the ACCs were measured. ACCs sharing the driving goals of the user were more trustworthy and acceptable than were ACCs not sharing the driving goals of the user. Furthermore, ACCs that took over driving tasks while providing information were more trustworthy and acceptable than were ACCs that took over driving tasks without providing information. Trustworthiness mediated the effects of both driving goals and automation level on acceptability of ACCs. As when trusting other humans, trusting smart systems depends on those systems sharing the user's goals. Furthermore, based on their description, smart systems that take over tasks are judged more trustworthy and acceptable when they also provide information. For optimal acceptability of smart systems, goals of the user should be shared by the smart systems, and smart systems should provide information to their user.

Development of a Cost-Effective Educational Tool to Promote Acceptance of the HPV Vaccination by Hispanic Mothers.

PubMed

Brueggmann, Doerthe; Opper, Neisha; Felix, Juan; Groneberg, David A; Mishell, Daniel R; Jaque, Jenny M

2016-06-01

Although vaccination against the Human Papilloma Virus (HPV) reduces the risk of related morbidities, the vaccine uptake remains low in adolescents. This has been attributed to limited parental knowledge and misconceptions. In this cross sectional study, we assessed the (1) clarity of educational material informing Hispanic mothers about HPV, cervical cancer and the HPV vaccine, (2) determined vaccination acceptability and (3) identified predictors of vaccine acceptance in an underserved health setting. 418 Hispanic mothers received the educational material and completed an anonymous survey. 91 % of participants understood most or all of the information provided. 77 % of participants reported vaccine acceptance for their children; this increased to 84 % when only those with children eligible to receive vaccination were included. Significant positive predictors of maternal acceptance of the HPV vaccine for their children were understanding most or all of the provided information, older age and acceptance of the HPV vaccine for themselves. Concerns about safety and general dislike of vaccines were negatively associated with HPV vaccine acceptance. Prior knowledge, level of education, previous relevant gynecologic history, general willingness to vaccinate and other general beliefs about vaccines were not significantly associated with HPV vaccine acceptance. The majority of participants reported understanding of the provided educational material. Vaccine acceptability was fairly high, but was even higher among those who understood the information. This study documents a cost-effective way to provide Hispanic mothers with easy-to-understand HPV-related information that could increase parental vaccine acceptability and future vaccine uptake among their children.

Can soft biometric traits assist user recognition?

NASA Astrophysics Data System (ADS)

Jain, Anil K.; Dass, Sarat C.; Nandakumar, Karthik

2004-08-01

Biometrics is rapidly gaining acceptance as the technology that can meet the ever increasing need for security in critical applications. Biometric systems automatically recognize individuals based on their physiological and behavioral characteristics. Hence, the fundamental requirement of any biometric recognition system is a human trait having several desirable properties like universality, distinctiveness, permanence, collectability, acceptability, and resistance to circumvention. However, a human characteristic that possesses all these properties has not yet been identified. As a result, none of the existing biometric systems provide perfect recognition and there is a scope for improving the performance of these systems. Although characteristics like gender, ethnicity, age, height, weight and eye color are not unique and reliable, they provide some information about the user. We refer to these characteristics as "soft" biometric traits and argue that these traits can complement the identity information provided by the primary biometric identifiers like fingerprint and face. This paper presents the motivation for utilizing soft biometric information and analyzes how the soft biometric traits can be automatically extracted and incorporated in the decision making process of the primary biometric system. Preliminary experiments were conducted on a fingerprint database of 160 users by synthetically generating soft biometric traits like gender, ethnicity, and height based on known statistics. The results show that the use of additional soft biometric user information significantly improves (approximately 6%) the recognition performance of the fingerprint biometric system.

Culture Connection Project: promoting multiculturalism in elementary schools.

PubMed

Matuk, Lucia Yiu; Ruggirello, Tina

2007-01-01

To promote multiculturalism among grade school students through drama education. Grade 3-6 students (N = 665) from 6 targeted schools including lead-class students (n = 158) representing each school. Elementary schools in Windsor-Essex County, Ontario, Canada. In this non-experimental design study, group discussions conducted with each lead class to explore students' understanding of multiculturalism were developed into an interactive drama performance and performed for all grades 3-6 students in their respective schools. A follow-up drama workshop was offered to each lead class one week after the drama performance. All students completed a 7-item questionnaire before and after the drama performance and after the drama workshop. Pre-test and post-test data collected were analyzed using T-test and ANOVA to determine the effects of drama education on students' attitudes toward multiculturalism. Statistical analysis at 0.05 significance level revealed that both the performance and the drama workshop heightened students' awareness of racism, and instilled cultural respect through "talking with others", "accepting others", and "believing that they can make a difference" in multiculturalism promotion. Drama education was an effective experiential tool for promoting multiculturalism in a school setting. The key to promoting inter-racial harmony is to respect and accept individual differences and to broaden the social determinants of health by providing culture safety care.

Contamination avoidance devices for poppet type shutoff valves

NASA Technical Reports Server (NTRS)

Endicott, D. L.

1972-01-01

The technology required to provide acceptable contamination damage avoidance characteristics for poppet type shutoff valves is discussed. Evaluation of the contamination avoidance characteristics of the basic 1T32095 propellant shutoff valve, the cycle life performance of these valves in an uncontaminated environment, and the effectiveness of various auxiliary contamination avoidance devices when used in conjunction with these poppet type valves are included. In addition, a secondary objective is to evaluate two methods of monitoring the performance of the test valves during actual operations using acoustical monitoring instrumentation.

Investigating gender violence in Jamaica.

PubMed

Spiring, Fred

2014-01-01

As Jamaica moves through implementation of their National Policy on Gender Equality and develops harassment legislation, this article attempts to investigate current levels and trends of gender-based violence in Jamaica. All analyses make use of existing data and data formats in developing performance indicators that illustrate the current state of gender violence in Jamaica. The analyses provide a baseline for the future assessment and comparison with internationally accepted gender-based violence indicators. All source data has been included to facilitate comparisons and discussions regarding related levels and trends of violence as well as addressing performance indicator effectiveness.

A high-energy-density redox flow battery based on zinc/polyhalide chemistry.

PubMed

Zhang, Liqun; Lai, Qinzhi; Zhang, Jianlu; Zhang, Huamin

2012-05-01

Zn and the Art of Battery Development: A zinc/polyhalide redox flow battery employs Br(-) /ClBr(2-) and Zn/Zn(2+) redox couples in its positive and negative half-cells, respectively. The performance of the battery is evaluated by charge-discharge cycling tests and reveals a high energy efficiency of 81%, based on a Coulombic efficiency of 96% and voltage efficiency of 84%. The new battery technology can provide high performance and energy density at an acceptable cost. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

COMPARISON OF NONLINEAR DYNAMICS OPTIMIZATION METHODS FOR APS-U

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Y.; Borland, Michael

Many different objectives and genetic algorithms have been proposed for storage ring nonlinear dynamics performance optimization. These optimization objectives include nonlinear chromaticities and driving/detuning terms, on-momentum and off-momentum dynamic acceptance, chromatic detuning, local momentum acceptance, variation of transverse invariant, Touschek lifetime, etc. In this paper, the effectiveness of several different optimization methods and objectives are compared for the nonlinear beam dynamics optimization of the Advanced Photon Source upgrade (APS-U) lattice. The optimized solutions from these different methods are preliminarily compared in terms of the dynamic acceptance, local momentum acceptance, chromatic detuning, and other performance measures.

Information Systems: How They Affect and Are Affected by Organization Structure

DTIC Science & Technology

1992-03-01

perceived managerial benefits of telecommuting were increased productivity, increased employee satisfaction, and decreased labor costs. Over 76 percent of...acceptable behavior, and provides fair treatment of employees. One drawback of this tool is that worker performance may actually decrease to the levels...of interpersonal relationships * Selection for employment and promotion based on technical competence. This style attempts to minimize human factors

Risk Management and Performance in the Balkans Support Contract

DTIC Science & Technology

2005-01-01

Defense contracts-United States-Case studies . 2. United States. Army- Procurement-Case studies . 3. Bosnia and Hercegovina-History, Military-20ts...24 3.1. Assessment of GAO Cost Study .................................. 72 3.2. Comparison of Potential Sources of Nonperformance...accepting inappropriate risks, what can it do about it? Case studies of CSS contracts can provide some answers. In this report, we present a case study of

Solar energy system installed at the North Georgia APDC office building

NASA Technical Reports Server (NTRS)

1979-01-01

A hydronic, automatic drain-down solar heating and cooling system is described. The system provides solar heat exchange from a 2,001 square foot effective collector area and supplies 65-70 percent of the building's cooling demand, 90-95 percent of the heating demand, and domestic hot water. The acceptance test plan and results, system operation and maintenance, and predicted system performance are presented.

DOD Business Systems Modernization: Further Actions Needed to Address Challenges and Improve Accountability

DTIC Science & Technology

2013-05-01

to Lack Adequate Validation Page 35 GAO-13-557 DOD Business Systems Modernization provided a compliance dashboard to document BEA...campaigns, execute marketing campaigns, and measure and evaluate the performance of marketing campaigns. Order-to- Cash Accept and process customer... dashboards reflected related GAO reports. In addition, the department’s fiscal year 2014 investment management guidance issued by the Office of the

Blast Performance of Four Armour Materials

DTIC Science & Technology

2013-08-01

provided in the Q&T condition, possessing tempered martensitic microstructures. Steels H, A and M possessed very similar microstructures at the...weld metal solidification cracking in steels and stainless steels . He has also undertaken extensive work on improving the weld zone toughness of high...3.1 Microstructures of steels It is generally accepted that a tempered martensitic microstructure is the most desirable condition for armour steel

Implementation of an Integrated On-Board Aircraft Engine Diagnostic Architecture

NASA Technical Reports Server (NTRS)

Armstrong, Jeffrey B.; Simon, Donald L.

2012-01-01

An on-board diagnostic architecture for aircraft turbofan engine performance trending, parameter estimation, and gas-path fault detection and isolation has been developed and evaluated in a simulation environment. The architecture incorporates two independent models: a realtime self-tuning performance model providing parameter estimates and a performance baseline model for diagnostic purposes reflecting long-term engine degradation trends. This architecture was evaluated using flight profiles generated from a nonlinear model with realistic fleet engine health degradation distributions and sensor noise. The architecture was found to produce acceptable estimates of engine health and unmeasured parameters, and the integrated diagnostic algorithms were able to perform correct fault isolation in approximately 70 percent of the tested cases

Performing the Peace: Using Playback Theatre in the Strengthening of Police-Community Relations.

PubMed

Smigelsky, Melissa A; Neimeyer, Robert A; Murphy, Virginia; Brown, DeAndre; Brown, Vinessa; Berryhill, Anthony; Knowlton, Joy

Police-community relations have catapulted onto the national stage after several high-profile instances of alleged police brutality. Blame and hostility can be barriers to positive police-community relations. Playback is a form of audience-inspired, improvisational theater designed to promote connectivity and empathy through storytelling. We tested the feasibility and acceptability of an arts-based intervention, bringing together police officers and formerly incarcerated individuals from the same community in Memphis, Tennessee. We collected pre/post quantitative data from five police officers and five ex-offenders who took part in the intervention, as well as qualitative data to provide contextual information. The project was feasible and acceptable to participants. Participants showed gains in their ability to make meaning of stressful life experiences. The officers and ex-offenders showed parallel gains in their increased positive attitudes toward the other group. This study demonstrates that creating contexts of safety and understanding necessary to address relational problems is both feasible and acceptable to law enforcement and ex-offenders.

Coping and acceptance: the greatest challenge for veterans with intestinal stomas.

PubMed

Krouse, Robert S; Grant, Marcia; Rawl, Susan M; Mohler, M Jane; Baldwin, Carol M; Coons, Stephen Joel; McCorkle, Ruth; Schmidt, C Max; Ko, Clifford Y

2009-03-01

Intestinal stomas (ostomies) create challenges for veterans. The goal of this qualitative analysis was to understand better patients' perspectives regarding their greatest challenge. Ostomates at three Veterans Affairs locations were surveyed using the modified City of Hope Quality of Life-Ostomy questionnaire that contained an open-ended request for respondents to describe their greatest challenge. The response rate was 51% (239 of 467); 68% (163 of 239) completed the open-ended item. Content analysis was performed by an experienced qualitative research team. Coping and acceptance were the most commonly addressed themes. The most frequently expressed issues and advice were related to a need for positive thinking and insight regarding adjustment over time. Coping strategies included the use of humor, recognition of positive changes resulting from the stoma, and normalization of life with an ostomy. Coping and acceptance are common themes described by veterans with an intestinal stoma. Health-care providers can assist veterans by utilizing ostomate self-management strategies, experience, and advice.

Provider Communication Regarding Psychosocial Factors Predicts Pain Beliefs in Parent and Child

PubMed Central

Sood, Erica; Pinder, Wendy; Pendley, Jennifer S.; Fisher, Alicia O.; Wali, Prateek D.; del Rosario, Fernando

2017-01-01

Objective To examine the role of provider communication about psychosocial causes of abdominal pain and recommendations for psychosocial intervention during a gastroenterology clinic visit in predicting families’ causal beliefs and perceptions of treatment acceptability. Method Participants were 57 children with a diagnosed or suspected abdominal pain-related functional gastrointestinal disorder (FGID) presenting for an outpatient gastroenterology follow-up visit and their accompanying parent. Children and parents completed questionnaires assessing child anxiety and abdominal pain severity, recall of provider communication about causes of abdominal pain and recommendations for intervention, their own causal beliefs about pain, and perceived acceptability of cognitive behavioral therapy (CBT) and standard medical treatment (SMT) after reading descriptions of each treatment. Providers completed a questionnaire assessing their perceptions and communication about the causes of the child’s abdominal pain and perceived acceptability of CBT. Results Provider communication about psychosocial causes and interventions was reported infrequently by parents, children, and providers. Parents rated psychosocial causes for abdominal pain as less likely than physical causes, and children and parents rated CBT as less acceptable than SMT. Parents’ recall of provider communication about psychosocial causes was associated with their own causal beliefs about pain and their perceived acceptability of CBT. Children’s and parents’ recall of provider recommendations for psychosocial intervention was associated with their perceived acceptability of CBT. Conclusion Results highlight the importance of provider communication about psychosocial contributors to abdominal pain and psychosocial interventions for children with FGIDs. Medical and mental health providers can partner to deliver care to children with FGIDs using a biopsychosocial approach. PMID:27035693

Regulatory Acceptance of Alternative Methods in the Development and Approval of Pharmaceuticals.

PubMed

Beken, Sonja; Kasper, Peter; van der Laan, Jan-Willem

Animal studies may be carried out to support first administration of a new medicinal product to either humans or the target animal species, or before performing clinical trials in even larger populations, or before marketing authorisation, or to control quality during production. Ethical and animal welfare considerations require that animal use is limited as much as possible. Directive 2010/63/EU on the protection of animals used for scientific purposes unambiguously fosters the application of the principle of the 3Rs when considering the choice of methods to be used.As such, today, the 3Rs are embedded in the relevant regulatory guidance both at the European (European Medicines Agency (EMA)) and (Veterinary) International Conference on Harmonization ((V)ICH) levels. With respect to non-clinical testing requirements for human medicinal products, reduction and replacement of animal testing has been achieved by the regulatory acceptance of new in vitro methods, either as pivotal, supportive or exploratory mechanistic studies. Whilst replacement of animal studies remains the ultimate goal, approaches aimed at reducing or refining animal studies have also been routinely implemented in regulatory guidelines, where applicable. The chapter provides an overview of the implementation of 3Rs in the drafting of non-clinical testing guidelines for human medicinal products at the level of the ICH. In addition, the revision of the ICH S2 guideline on genotoxicity testing and data interpretation for pharmaceuticals intended for human use is discussed as a case study.In October 2010, the EMA established a Joint ad hoc Expert Group (JEG 3Rs) with the mandate to improve and foster the application of 3Rs principles to the regulatory testing of medicinal products throughout their lifecycle. As such, a Guideline on regulatory acceptance of 3R testing approaches was drafted that defines regulatory acceptance and provides guidance on the scientific and technical criteria for regulatory acceptance of 3R testing approaches, including a process for collection of real-life data (safe harbour). Pathways for regulatory acceptance of 3R testing approaches are depicted and a new procedure for submission and evaluation of a proposal for regulatory acceptance of 3R testing approaches is described.

Developing Crew Health Care and Habitability Systems for the Exploration Vision

NASA Technical Reports Server (NTRS)

Laurini, Kathy; Sawin, Charles F.

2006-01-01

This paper will discuss the specific mission architectures associated with the NASA Exploration Vision and review the challenges and drivers associated with developing crew health care and habitability systems to manage human system risks. Crew health care systems must be provided to manage crew health within acceptable limits, as well as respond to medical contingencies that may occur during exploration missions. Habitability systems must enable crew performance for the tasks necessary to support the missions. During the summer of 2005, NASA defined its exploration architecture including blueprints for missions to the moon and to Mars. These mission architectures require research and technology development to focus on the operational risks associated with each mission, as well as the risks to long term astronaut health. This paper will review the highest priority risks associated with the various missions and discuss NASA s strategies and plans for performing the research and technology development necessary to manage the risks to acceptable levels.

Indoor Air Quality and Thermal Comfort in School Buildings

NASA Astrophysics Data System (ADS)

Juhásová Šenitková, Ingrid

2017-12-01

This paper presents results to thermal comfort and environment quality questions in 21 school building rooms. Results show that about 80% of the occupants expressed satisfaction with their thermal comfort in only 11% of the buildings surveyed. Air quality scores were somewhat higher, with 26% of buildings having 80% or occupant satisfaction. With respect to thermal comfort and air quality performance goals set out by standards, most buildings appear to be falling far short. Occupant surveys offer a means to systematically measure this performance, and also to provide diagnostic information for building designers and operators. The odours from building materials as well as human odours were studied by field measurement. The odour intensity and indoor air acceptability were assessed by a sensory panel. The concentrations of total volatile organic compounds and carbon dioxide were measured. The odours from occupancy and building materials were studied under different air change rate. The case study of indoor air acceptability concerning to indoor odours and its effect on perceived air quality are also presented in this paper.

Fluid infusion system

NASA Technical Reports Server (NTRS)

1974-01-01

Performance testing carried out in the development of the prototype zero-g fluid infusion system is described and summarized. Engineering tests were performed in the course of development, both on the original breadboard device and on the prototype system. This testing was aimed at establishing baseline system performance parameters and facilitating improvements. Acceptance testing was then performed on the prototype system to verify functional performance. Acceptance testing included a demonstration of the fluid infusion system on a laboratory animal.

Parental Acceptability of Contraceptive Methods Offered to their Teen During a Confidential Health Care Visit

PubMed Central

Hartman, Lauren B; Shafer, Mary-Ann; Pollack, Lance M; Wibbelsman, Charles; Chang, Fay; Tebb, Kathleen P

2013-01-01

Purpose To examine parental acceptability of contraceptive methods offered confidentially to their adolescent daughter. Methods A random sample of 261 parents/guardians with a daughter between 12–17 completed a telephone survey examining the relationship between parental acceptability of seven contraceptive methods with adolescents’ likelihood to have sex, parenting beliefs, parents’ sexual health as teens, sexually transmitted infection (STI) knowledge, and demographic factors. Results Acceptability was highest for oral contraceptive pills (59%), and lowest for intrauterine device (IUD) (18%). Parental acceptance of teens’ autonomy was significantly associated with increased acceptability of all methods. Parental knowledge of STIs was poor and 51% found it acceptable for clinicians to provide their sexually active teen with condoms. Conclusion Conclusions: Parents were more accepting of OCPs and condoms, compared to IUDs and implants. Parental recognition of their teen’s autonomy was associated with greater parental acceptability of clinicians providing their adolescent with contraceptives (regardless of the specific type of method being offered). PMID:23332493

Heater Validation for the NEXT-C Hollow Cathodes

NASA Technical Reports Server (NTRS)

Verhey, Timothy R.; Soulas, George C.; Mackey, Jonathan A.

2018-01-01

Swaged cathode heaters whose design was successfully demonstrated under a prior flight project are to be provided by the NASA Glenn Research Center for the NEXT-C ion thruster being fabricated by Aerojet Rocketdyne. Extensive requalification activities were performed to validate process controls that had to be re-established or revised because systemic changes prevented reuse of the past approaches. A development batch of heaters was successfully fabricated based on the new process controls. Acceptance and cyclic life testing of multiple discharge and neutralizer sized heaters extracted from the development batch was initiated in August, 2016, with the last heater completing testing in April, 2017. Cyclic life testing results substantially exceeded the NEXT-C thruster requirement as well as all past experience for GRC-fabricated units. The heaters demonstrated ultimate cyclic life capability of 19050 to 33500 cycles. A qualification batch of heaters is now being fabricated using the finalized process controls. A set of six heaters will be acceptance and cyclic tested to verify conformance to the behavior observed with the development heaters. The heaters for flight use will be then be provided to the contractor from the remainder of the qualification batch. This paper summarizes the fabrication process control activities and the acceptance and life testing of the development heater units.

Insecticides for Suppression of Nylanderia fulva

PubMed Central

Oi, Faith; Oi, David; Mannion, Catharine

2017-01-01

Nylanderia fulva (Mayr) is an invasive ant that is a serious pest in the southern United States. Pest control operators and homeowners are challenged to manage pest populations below acceptable thresholds. Contact and bait insecticides are key components of an Integrated Pest Management (IPM) strategy, however, little is known about their efficacy. In repellency and efficacy bioassays, N. fulva were not completely repelled by any insecticide tested, although fewer ants crossed a surface treated with Temprid®. Few insecticides provided rapid control. Termidor® and Temprid® were the best performing with mean mortality of 100% in 13.4 and 19.0 days, respectively. In no-choice bait acceptance studies, it was shown that N. fulva generally had greater acceptance of carbohydrate-based ant baits (Advion®, InTiceTM (gel), and InTiceTM (granular)). However, mortality was low for the InTiceTM baits in a 7-day bioassay. Maxforce® Ant Killer Bait Gel and Advance® 375A in the spring and Maxforce® Complete in the summer and fall required the fewest days to reach 100% mortality. Bait active ingredients that resulted in the highest mortality were hydramethylnon and fipronil. These data on the efficacy of commercially available contact and bait insecticides provide valuable information to manage this invasive pest. PMID:28858251

Detection methods and performance criteria for genetically modified organisms.

PubMed

Bertheau, Yves; Diolez, Annick; Kobilinsky, André; Magin, Kimberly

2002-01-01

Detection methods for genetically modified organisms (GMOs) are necessary for many applications, from seed purity assessment to compliance of food labeling in several countries. Numerous analytical methods are currently used or under development to support these needs. The currently used methods are bioassays and protein- and DNA-based detection protocols. To avoid discrepancy of results between such largely different methods and, for instance, the potential resulting legal actions, compatibility of the methods is urgently needed. Performance criteria of methods allow evaluation against a common standard. The more-common performance criteria for detection methods are precision, accuracy, sensitivity, and specificity, which together specifically address other terms used to describe the performance of a method, such as applicability, selectivity, calibration, trueness, precision, recovery, operating range, limit of quantitation, limit of detection, and ruggedness. Performance criteria should provide objective tools to accept or reject specific methods, to validate them, to ensure compatibility between validated methods, and be used on a routine basis to reject data outside an acceptable range of variability. When selecting a method of detection, it is also important to consider its applicability, its field of applications, and its limitations, by including factors such as its ability to detect the target analyte in a given matrix, the duration of the analyses, its cost effectiveness, and the necessary sample sizes for testing. Thus, the current GMO detection methods should be evaluated against a common set of performance criteria.

Evaluating performance feedback: a research study into issues of credibility and utility for nursing clinicians.

PubMed

Fereday, Jennifer; Muir-Cochrane, Eimear

2004-01-01

Performance feedback is information provided to employees about how well they are performing in their work role. The nursing profession has a long history of providing formal, written performance reviews, traditionally from a manager to subordinate, with less formal feedback sources including peers, clients and multidisciplinary team members. This paper is based on one aspect of a PhD research study exploring the dynamics of performance feedback primarily from the nursing clinicians' perspective. The research reported here discusses the impact of the social relationship (between the source and recipient of performance feedback) on the recipient's evaluation of feedback as being 'credible' and 'useful' for self-assessment. Focus group interviews were utilised to ascertain the nursing clinicians' perspectives of performance feedback. Thematic analysis of the data was informed by the Social Phenomenology of Alfred Schutz (1967) specifically his theories of intersubjective understanding. Findings supported the level of familiarity between the feedback source and the nursing clinician as a significant criterion influencing the acceptance or rejection of feedback. Implications for the selection of performance feedback sources and processes within nursing are discussed.

MINIS: Multipurpose Interactive NASA Information System

NASA Technical Reports Server (NTRS)

1976-01-01

The Multipurpose Interactive NASA Information Systems (MINIS) was developed in response to the need for a data management system capable of operation on several different minicomputer systems. The desired system had to be capable of performing the functions of a LANDSAT photo descriptive data retrieval system while remaining general in terms of other acceptable user definable data bases. The system also had to be capable of performing data base updates and providing user-formatted output reports. The resultant MINI System provides all of these capabilities and several other features to complement the data management system. The MINI System is currently implemented on two minicomputer systems and is in the process of being installed on another minicomputer system. The MINIS is operational on four different data bases.

Performance optimization of spectral amplitude coding OCDMA system using new enhanced multi diagonal code

NASA Astrophysics Data System (ADS)

Imtiaz, Waqas A.; Ilyas, M.; Khan, Yousaf

2016-11-01

This paper propose a new code to optimize the performance of spectral amplitude coding-optical code division multiple access (SAC-OCDMA) system. The unique two-matrix structure of the proposed enhanced multi diagonal (EMD) code and effective correlation properties, between intended and interfering subscribers, significantly elevates the performance of SAC-OCDMA system by negating multiple access interference (MAI) and associated phase induce intensity noise (PIIN). Performance of SAC-OCDMA system based on the proposed code is thoroughly analyzed for two detection techniques through analytic and simulation analysis by referring to bit error rate (BER), signal to noise ratio (SNR) and eye patterns at the receiving end. It is shown that EMD code while using SDD technique provides high transmission capacity, reduces the receiver complexity, and provides better performance as compared to complementary subtraction detection (CSD) technique. Furthermore, analysis shows that, for a minimum acceptable BER of 10-9 , the proposed system supports 64 subscribers at data rates of up to 2 Gbps for both up-down link transmission.

Performance of fusion algorithms for computer-aided detection and classification of mines in very shallow water obtained from testing in navy Fleet Battle Exercise-Hotel 2000

NASA Astrophysics Data System (ADS)

Ciany, Charles M.; Zurawski, William; Kerfoot, Ian

2001-10-01

The performance of Computer Aided Detection/Computer Aided Classification (CAD/CAC) Fusion algorithms on side-scan sonar images was evaluated using data taken at the Navy's's Fleet Battle Exercise-Hotel held in Panama City, Florida, in August 2000. A 2-of-3 binary fusion algorithm is shown to provide robust performance. The algorithm accepts the classification decisions and associated contact locations form three different CAD/CAC algorithms, clusters the contacts based on Euclidian distance, and then declares a valid target when a clustered contact is declared by at least 2 of the 3 individual algorithms. This simple binary fusion provided a 96 percent probability of correct classification at a false alarm rate of 0.14 false alarms per image per side. The performance represented a 3.8:1 reduction in false alarms over the best performing single CAD/CAC algorithm, with no loss in probability of correct classification.

National evaluation of healthcare provider attitudes toward organ donation after cardiac death.

PubMed

Mandell, M Susan; Zamudio, Stacy; Seem, Debbie; McGaw, Lin J; Wood, Geri; Liehr, Patricia; Ethier, Angela; D'Alessandro, Anthony M

2006-12-01

Organ donation after cardiac death will save lives by increasing the number of transplantable organs. But many healthcare providers are reluctant to participate when the withdrawal of intensive care leads to organ donation. Prior surveys indicate ethical concerns as a barrier to the practice of organ donation after cardiac death, but the specific issues that characterize these concerns are unknown. We thus aimed to identify what barriers healthcare providers perceive. We conducted a qualitative analysis of focus group transcripts to identify issues of broad importance. Healthcare setting. Participants included 141 healthcare providers representing critical care and perioperative nurses, transplant surgeons, medical examiners, organ procurement personnel, neurosurgeons, and neurologists. Collection and analysis of information regarding healthcare providers' attitudes and beliefs. All focus groups agreed that increased organ availability is a benefit but questioned the quality of organs recovered. Study participants identified a lack of standards for patient prognostication and cardiopulmonary death and a failure to prevent a conflict between patient and donor interests as obstacles to acceptance of organ donation after cardiac death. They questioned the practices and motives of colleagues who participate in organ donation after cardiac death, apprehensive that real or perceived impropriety would affect public perception. Healthcare providers are uncomfortable at the clinical juncture where end-of-life care and organ donation interface. Our findings are consistent with theories that care providers are hesitant to perform medical tasks that they consider to be outside the focus of their practice, especially when there is potential conflict of interest. This conflict appears to impose moral distress on healthcare providers and limits acceptance of organ donation after cardiac death. Future research is warranted to examine the effect of standardized procedures on reducing moral distress. The hypothesis generated by this qualitative study is that use of neutral third parties to broach the subject of organ donation may improve acceptance of organ donation after cardiac death.

Cargo Movement Operations System (CMOS) System Segment Design Document. Revision. Increment 2

DTIC Science & Technology

1990-06-14

ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: ACCEPT [ ] REJECT [ ] COMMENT STATUS: OPEN [ J CLOSED [ ] Cmnt Page Paragraph No. No. Number...provided (SSDDII-0004). CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ 3 ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED...but not in paragraph 10.1. CMOS PMO ACCEPTS COMMENT: YES [ ) NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] * COMMENT DISPOSITION: COMMENT STATUS: OPEN

Designing a two-rank acceptance sampling plan for quality inspection of geospatial data products

NASA Astrophysics Data System (ADS)

Tong, Xiaohua; Wang, Zhenhua; Xie, Huan; Liang, Dan; Jiang, Zuoqin; Li, Jinchao; Li, Jun

2011-10-01

To address the disadvantages of classical sampling plans designed for traditional industrial products, we originally propose a two-rank acceptance sampling plan (TRASP) for the inspection of geospatial data outputs based on the acceptance quality level (AQL). The first rank sampling plan is to inspect the lot consisting of map sheets, and the second is to inspect the lot consisting of features in an individual map sheet. The TRASP design is formulated as an optimization problem with respect to sample size and acceptance number, which covers two lot size cases. The first case is for a small lot size with nonconformities being modeled by a hypergeometric distribution function, and the second is for a larger lot size with nonconformities being modeled by a Poisson distribution function. The proposed TRASP is illustrated through two empirical case studies. Our analysis demonstrates that: (1) the proposed TRASP provides a general approach for quality inspection of geospatial data outputs consisting of non-uniform items and (2) the proposed acceptance sampling plan based on TRASP performs better than other classical sampling plans. It overcomes the drawbacks of percent sampling, i.e., "strictness for large lot size, toleration for small lot size," and those of a national standard used specifically for industrial outputs, i.e., "lots with different sizes corresponding to the same sampling plan."

Delivery System Integration and Health Care Spending and Quality for Medicare Beneficiaries

PubMed Central

McWilliams, J. Michael; Chernew, Michael E.; Zaslavsky, Alan M.; Hamed, Pasha; Landon, Bruce E.

2013-01-01

Background The Medicare accountable care organization (ACO) programs rely on delivery system integration and provider risk sharing to lower spending while improving quality of care. Methods Using 2009 Medicare claims and linked American Medical Association Group Practice data, we assigned 4.29 million beneficiaries to provider groups based on primary care use. We categorized group size according to eligibility thresholds for the Shared Savings (≥5,000 assigned beneficiaries) and Pioneer (≥15,000) ACO programs and distinguished hospital-based from independent groups. We compared spending and quality of care between larger and smaller provider groups and examined how size-related differences varied by 2 factors considered central to ACO performance: group primary care orientation (measured by the primary care share of large groups’ specialty mix) and provider risk sharing (measured by county health maintenance organization penetration and its relationship to financial risk accepted by different group types for managed care patients). Spending and quality of care measures included total medical spending, spending by type of service, 5 process measures of quality, and 30-day readmissions, all adjusted for sociodemographic and clinical characteristics. Results Compared with smaller groups, larger hospital-based groups had higher total per-beneficiary spending in 2009 (mean difference: +$849), higher 30-day readmission rates (+1.3% percentage points), and similar performance on 4 of 5 process measures of quality. In contrast, larger independent physician groups performed better than smaller groups on all process measures and exhibited significantly lower per-beneficiary spending in counties where risk sharing by these groups was more common (−$426). Among all groups sufficiently large to participate in ACO programs, a strong primary care orientation was associated with lower spending, fewer readmissions, and better quality of diabetes care. Conclusions Spending was lower and quality of care better for Medicare beneficiaries served by larger independent physician groups with strong primary care orientations in environments where providers accepted greater risk. PMID:23780467

Differences in HIV vaccine acceptability between genders

PubMed Central

Kakinami, Lisa; Newman, Peter A.; Lee, Sung-Jae; Duan, Naihua

2010-01-01

The development of safe and efficacious preventive HIV vaccines offers the best long-term hope of controlling the AIDS pandemic. Nevertheless, suboptimal uptake of safe and efficacious vaccines that already exist suggest that HIV vaccine acceptability cannot be assumed, particularly among communities most vulnerable to HIV. The present study aimed to identify barriers and motivators to future HIV vaccine acceptability among low socioeconomic, ethnically diverse men and women in Los Angeles County. Participants completed a cross-sectional survey assessing their attitudes and beliefs regarding future HIV vaccines. Hypothetical HIV vaccine scenarios were administered to determine HIV vaccine acceptability. Two-sided t-tests were performed, stratified by gender, to examine the association between vaccine acceptability and potential barriers and motivators. Barriers to HIV vaccine acceptability differed between men and women. For women, barriers to HIV vaccine acceptability were related to their intimate relationships (p <0.05), negative experiences with health care providers (p <0.05) and anticipated difficulties procuring insurance (p <0.01). Men were concerned that the vaccine would weaken the immune system (p <0.005) or would affect their HIV test results (p <0.05). Motivators for women included the ability to conceive a child without worrying about contracting HIV (p <0.10) and support from their spouse/significant other for being vaccinated (p <0.10). Motivators for men included feeling safer with sex partners (p <0.05) and social influence from friends to get vaccinated (p <0.005). Family support for HIV immunization was a motivator for both men and women (p <0.10). Gender-specific interventions may increase vaccine acceptability among men and women at elevated risk for HIV infection. Among women, interventions need to focus on addressing barriers due to gendered power dynamics in relationships and discrimination in health care. Among men, education that addresses fears and misconceptions about adverse effects of HIV vaccination on health and the importance of vaccination as one component of integrated HIV prevention may increase vaccine acceptability. PMID:18484322

Flight-test evaluation of STOL control and flight director concepts in a powered-lift aircraft flying curved decelerating approaches

NASA Technical Reports Server (NTRS)

Hindson, W. S.; Hardy, G. H.; Innis, R. C.

1981-01-01

Flight tests were carried out to assess the feasibility of piloted steep curved, and decelerating approach profiles in powered lift STOL aircraft. Several STOL control concepts representative of a variety of aircraft were evaluated in conjunction with suitably designed flight directions. The tests were carried out in a real navigation environment, employed special electronic cockpit displays, and included the development of the performance achieved and the control utilization involved in flying 180 deg turning, descending, and decelerating approach profiles to landing. The results suggest that such moderately complex piloted instrument approaches may indeed be feasible from a pilot acceptance point of view, given an acceptable navigation environment. Systems with the capability of those used in this experiment can provide the potential of achieving instrument operations on curved, descending, and decelerating landing approaches to weather minima corresponding to CTOL Category 2 criteria, while also providing a means of realizing more efficient operations during visual flight conditions.

A company-instituted program to improve blood pressure control in primary care.

PubMed

Alderman, M H; Melcher, L A

1981-01-01

An occupation-based effort to improve the outcome of antihypertensive therapy provided in the community was instituted by the Massachusetts Mutual Life Insurance Company in 1977. The goal of the program was to utilize the administrative and organizational resources of the company to enhance employee/patient adherence to treatment provided in conventional primary care settings. Key elements of the program were: companywide education and on-site screening, referral to community physicians and company assumption of all patient costs, linked to a monitoring system to permit oversight of care. Initially, 98% of employees were screened, 70% accepted referral for care and 59% fully adhered to program performance criteria. Blood pressure control has risen from 36% at the beginning to 69% at the end of the second year. Fully compliant patients have achieved the greatest lowering of blood pressure and compiled the best work attendance record. Program costs are modest and acceptance by employees and physicians supports the concept that occupation-based, systematic efforts can enhance the impact of primary care.

UAS Air Traffic Controller Acceptability Study. 2; Evaluating Detect and Avoid Technology and Communication Delays in Simulation

NASA Technical Reports Server (NTRS)

Comstock, James R., Jr.; Ghatas, Rania W.; Consiglio, Maria C.; Chamberlain, James P.; Hoffler, Keith D.

2015-01-01

This study evaluated the effects of communications delays and winds on air traffic controller ratings of acceptability of horizontal miss distances (HMDs) for encounters between Unmanned Aircraft Systems (UAS) and manned aircraft in a simulation of the Dallas-Ft. Worth (DFW) airspace. Fourteen encounters per hour were staged in the presence of moderate background traffic. Seven recently retired controllers with experience at DFW served as subjects. Guidance provided to the UAS pilots for maintaining a given HMD was provided by information from Detect and Avoid (DAA) self-separation algorithms (Stratway+) displayed on the Multi-Aircraft Control System. This guidance consisted of amber "bands" on the heading scale of the UAS navigation display indicating headings that would result in a loss of well clear between the UAS and nearby traffic. Winds tested were successfully handled by the DAA algorithms and did not affect the controller acceptability ratings of the HMDs. Voice communications delays for the UAS were also tested and included one-way delay times of 0, 400, 1200, and 1800 msec. For longer communications delays, there were changes in strategy and communications flow that were observed and reported by the controllers. The aim of this work is to provide useful information for guiding future rules and regulations applicable to flying UAS in the NAS. Information from this study will also be of value to the Radio Technical Commission for Aeronautics (RTCA) Special Committee 228 - Minimum Performance Standards for UAS.

Cassini RTG acceptance test results and RTG performance on Galileo and Ulysses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, C.E.; Klee, P.M.

Flight acceptance testing has been completed for the RTGs to be used on the Cassini spacecraft which is scheduled for an October 6, 1997 launch to Saturn. The acceptance test program includes vibration tests, magnetic field measurements, mass properties (weight and c.g.) and thermal vacuum test. This paper presents the thermal vacuum test results. Three RTGs are to be used, F-2, F-6, and F-7. F-5 is the backup RTG, as it was for the Galileo and Ulysses missions launched in 1989 and 1990, respectively. RTG performance measured during the thermal vacuum tests carried out at the Mound Laboratory facility metmore » all specification requirements. Beginning of mission (BOM) and end of mission (EOM) power predictions have been made based on these tests results. BOM power is predicted to be 888 watts compared to the minimum requirement of 826 watts. Degradation models predict the EOM power after 16 years is to be 640 watts compared to a minimum requirement of 596 watts. Results of small scale module tests are also shown. The modules contain couples from the qualification and flight production runs. The tests have exceeded 28,000 hours (3.2 years) and are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. All test results indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of over 5% are predicted. Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Telemetry data are also shown for the RTG on the Ulysses spacecraft which completed its planned mission in 1995 and is now in the extended mission.« less

Cassini RTG acceptance test results and RTG performance on Galileo and Ulysses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, C.E.; Klee, P.M.

Flight acceptance testing has been completed for the RTGs to be used on the Cassini spacecraft which is scheduled for an October 6, 1997 launch to Saturn. The acceptance test program includes vibration tests, magnetic field measurements, properties (weight and c.g.) and thermal vacuum test. This paper presents The thermal vacuum test results. Three RTGs are to be used, F-2, F-6, and F-7. F-5 is tile back-up RTG, as it was for the Galileo and Ulysses missions launched in 1989 and 1990, respectively. RTG performance measured during the thermal vacuum tests carried out at die Mound Laboratory facility met allmore » specification requirements. Beginning of mission (BOM) and end of mission (EOM) power predictions have been made based on than tests results. BOM power is predicted to be 888 watts compared to the minimum requirement of 826 watts. Degradation models predict the EOM power after 16 years is to be 640 watts compared to a minimum requirement of 596 watts. Results of small scale module tests are also showing. The modules contain couples from the qualification and flight production runs. The tests have exceeded 28,000 hours (3.2 years) and are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. All test results indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of over five percent are predicted. Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Telemetry data are also shown for the RTG on the Ulysses spacecraft which completed its planned mission in 1995 and is now in the extended mission.« less

Large Aperture "Photon Bucket" Optical Receiver Performance in High Background Environments

NASA Technical Reports Server (NTRS)

Vilnrotter, Victor A.; Hoppe, D.

2011-01-01

The potential development of large aperture groundbased "photon bucket" optical receivers for deep space communications, with acceptable performance even when pointing close to the sun, is receiving considerable attention. Sunlight scattered by the atmosphere becomes significant at micron wavelengths when pointing to a few degrees from the sun, even with the narrowest bandwidth optical filters. In addition, high quality optical apertures in the 10-30 meter range are costly and difficult to build with accurate surfaces to ensure narrow fields-of-view (FOV). One approach currently under consideration is to polish the aluminum reflector panels of large 34-meter microwave antennas to high reflectance, and accept the relatively large FOV generated by state-of-the-art polished aluminum panels with rms surface accuracies on the order of a few microns, corresponding to several-hundred micro-radian FOV, hence generating centimeter-diameter focused spots at the Cassegrain focus of 34-meter antennas. Assuming pulse-position modulation (PPM) and Poisson-distributed photon-counting detection, a "polished panel" photon-bucket receiver with large FOV will collect hundreds of background photons per PPM slot, along with comparable signal photons due to its large aperture. It is demonstrated that communications performance in terms of PPM symbol-error probability in high-background high-signal environments depends more strongly on signal than on background photons, implying that large increases in background energy can be compensated by a disproportionally small increase in signal energy. This surprising result suggests that large optical apertures with relatively poor surface quality may nevertheless provide acceptable performance for deep-space optical communications, potentially enabling the construction of cost-effective hybrid RF/optical receivers in the future.

The advent of canine performance science: offering a sustainable future for working dogs.

PubMed

Cobb, Mia; Branson, Nick; McGreevy, Paul; Lill, Alan; Bennett, Pauleen

2015-01-01

Working and sporting dogs provide an essential contribution to many industries worldwide. The common development, maintenance and disposal of working and sporting dogs can be considered in the same way as other animal production systems. The process of 'production' involves genetic selection, puppy rearing, recruitment and assessment, training, housing and handling, handler education, health and working life end-point management. At present, inefficiencies throughout the production process result in a high failure rate of dogs attaining operational status. This level of wastage would be condemned in other animal production industries for economic reasons and has significant implications for dog welfare, as well as public perceptions of dog-based industries. Standards of acceptable animal use are changing and some historically common uses of animals are no longer publicly acceptable, especially where harm is caused for purposes deemed trivial, or where alternatives exist. Public scrutiny of animal use appears likely to increase and extend to all roles of animals, including working and sporting dogs. Production system processes therefore need to be transparent, traceable and ethically acceptable for animal use to be sustainable into the future. Evidence-based approaches already inform best practice in fields as diverse as agriculture and human athletic performance. This article introduces the nascent discipline of canine performance science, which aims to facilitate optimal product quality and production efficiency, while also assuring evidence-based increments in dog welfare through a process of research and development. Our thesis is that the model of canine performance science offers an objective, transparent and traceable opportunity for industry development in line with community expectations and underpins a sustainable future for working dogs. This article is part of a Special Issue entitled: Canine Behavior. Copyright © 2014 Elsevier B.V. All rights reserved.

Cassini RTG Acceptance Test Results and RTG Performance on Galileo and Ulysses

DOE R&D Accomplishments Database

Kelly, C. E.; Klee, P. M.

1997-06-01

Flight acceptance testing has been completed for the RTGs to be used on the Cassini spacecraft which is scheduled for an October 6, 1997 launch to Saturn. The acceptance test program includes vibration tests, magnetic field measurements, properties (weight and c.g.) and thermal vacuum test. This paper presents The thermal vacuum test results. Three RTGs are to be used, F 2, F 6, and F 7. F 5 is tile back up RTG, as it was for the Galileo and Ulysses missions launched in 1989 and 1990, respectively. RTG performance measured during the thermal vacuum tests carried out at die Mound Laboratory facility met all specification requirements. Beginning of mission (BOM) and end of mission (EOM) power predictions have been made based on than tests results. BOM power is predicted to be 888 watts compared to the minimum requirement of 826 watts. Degradation models predict the EOM power after 16 years is to be 640 watts compared to a minimum requirement of 596 watts. Results of small scale module tests are also showing. The modules contain couples from the qualification and flight production runs. The tests have exceeded 28,000 hours (3.2 years) and are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. All test results indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of over five percent are predicted. Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Telemetry data are also shown for the RTG on the Ulysses spacecraft which completed its planned mission in 1995 and is now in the extended mission.

Compact Buried Ducts in a Hot-Humid Climate House

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mallay, D.

2016-01-01

A system of compact, buried ducts provides a high-performance and cost-effective solution for delivering conditioned air throughout the building. This report outlines research activities that are expected to facilitate adoption of compact buried duct systems by builders. The results of this research would be scalable to many new house designs in most climates and markets, leading to wider industry acceptance and building code and energy program approval.

Risk of Performance Decrement and Crew Illness Due to an Inadequate Food System

NASA Technical Reports Server (NTRS)

Douglas, Grace L.; Cooper, Maya; Bermudez-Aguirre, Daniela; Sirmons, Takiyah

2016-01-01

NASA is preparing for long duration manned missions beyond low-Earth orbit that will be challenged in several ways, including long-term exposure to the space environment, impacts to crew physiological and psychological health, limited resources, and no resupply. The food system is one of the most significant daily factors that can be altered to improve human health, and performance during space exploration. Therefore, the paramount importance of determining the methods, technologies, and requirements to provide a safe, nutritious, and acceptable food system that promotes crew health and performance cannot be underestimated. The processed and prepackaged food system is the main source of nutrition to the crew, therefore significant losses in nutrition, either through degradation of nutrients during processing and storage or inadequate food intake due to low acceptability, variety, or usability, may significantly compromise the crew's health and performance. Shelf life studies indicate that key nutrients and quality factors in many space foods degrade to concerning levels within three years, suggesting that food system will not meet the nutrition and acceptability requirements of a long duration mission beyond low-Earth orbit. Likewise, mass and volume evaluations indicate that the current food system is a significant resource burden. Alternative provisioning strategies, such as inclusion of bioregenerative foods, are challenged with resource requirements, and food safety and scarcity concerns. Ensuring provisioning of an adequate food system relies not only upon determining technologies, and requirements for nutrition, quality, and safety, but upon establishing a food system that will support nutritional adequacy, even with individual crew preference and self-selection. In short, the space food system is challenged to maintain safety, nutrition, and acceptability for all phases of an exploration mission within resource constraints. This document presents the evidence for the Risk of Performance Decrement and Crew Illness Due to an Inadequate Food System and the gaps in relation to exploration, as identified by the NASA Human Research Program (HRP). The research reviewed here indicates strategies to establish methods, technologies, and requirements that increase food stability, support adequate nutrition, quality, and variety, enable supplementation with grow-pick-and-eat salad crops, ensure safety, and reduce resource use. Obtaining the evidence to establish an adequate food system is essential, as the resources allocated to the food system may be defined based on the data relating nutritional stability and food quality requirements to crew performance and health.

47 CFR 2.805 - Operation of radio frequency devices prior to equipment authorization.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of performance and determination of customer acceptability, during developmental, design, or pre... performance and determination of customer acceptability, during developmental, design, or pre-production... authority of an experimental radio service authorization issued under part 5 of this chapter. (c) Operation...

40 CFR 80.141 - Interim detergent gasoline program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... considered acceptable for demonstration of IVD control performance. Examples of acceptable test procedures... carburetor deposits. Examples of acceptable test procedures for demonstration of carburetor deposit control... ultimate consumer; (ii) All additized post-refinery component (PRC); and (iii) All detergent additives sold...

40 CFR 80.141 - Interim detergent gasoline program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... considered acceptable for demonstration of IVD control performance. Examples of acceptable test procedures... carburetor deposits. Examples of acceptable test procedures for demonstration of carburetor deposit control... ultimate consumer; (ii) All additized post-refinery component (PRC); and (iii) All detergent additives sold...

40 CFR 80.141 - Interim detergent gasoline program.

Code of Federal Regulations, 2012 CFR

2012-07-01

... considered acceptable for demonstration of IVD control performance. Examples of acceptable test procedures... carburetor deposits. Examples of acceptable test procedures for demonstration of carburetor deposit control... ultimate consumer; (ii) All additized post-refinery component (PRC); and (iii) All detergent additives sold...

40 CFR 80.141 - Interim detergent gasoline program.

Code of Federal Regulations, 2013 CFR

2013-07-01

... considered acceptable for demonstration of IVD control performance. Examples of acceptable test procedures... carburetor deposits. Examples of acceptable test procedures for demonstration of carburetor deposit control... ultimate consumer; (ii) All additized post-refinery component (PRC); and (iii) All detergent additives sold...

Team-based assessment of professional behavior in medical students

PubMed Central

RAEE, HOJAT; AMINI, MITRA; MOMEN NASAB, AMENEH; MALEK POUR, ABDOLRASOUL; JAFARI, MOHAMMAD MORAD

2014-01-01

Introduction: Self and peer assessment provides important information about the individual’s performance and behavior in all aspects of their professional environment work. The aim of this study is to evaluate the professional behavior and performance in medical students in the form of team based assessment. Methods: In a cross-sectional study, 100 medical students in the 7th year of education were randomly selected and enrolled; for each student five questionnaires were filled out, including one self-assessment, two peer assessments and two residents assessment. The scoring system of the questionnaires was based on seven point Likert scale.  After filling out the questions in the questionnaire, numerical data and written comments provided to the students were collected, analyzed and discussed. Internal consistency (Cronbach’s alpha) of the questionnaires was assessed. A p<0.05 was considered as significant level. Results: Internal consistency was acceptable (Cronbach’s alpha 0.83). Interviews revealed that the majority of students and assessors interviewed found the method acceptable. The range of scores was 1-6 (Mean±SD=4.39±0.57) for the residents' assessment, 2-6 (Mean±SD= 4.49±0.53) for peer assessment, and 3-7 (Mean±SD=5.04±0.32) for self-assessment. There was a significant difference between self assessment and other methods of assessment. Conclusions: This study demonstrates that a team-based assessment is an acceptable and feasible method for peer and self-assessment of medical students’ learning in a clinical clerkship, and has some advantages over traditional assessment methods. Further studies are needed to focus on the strengths and weaknesses. PMID:25512933

Factors influencing alert acceptance: a novel approach for predicting the success of clinical decision support

PubMed Central

Seidling, Hanna M; Phansalkar, Shobha; Seger, Diane L; Paterno, Marilyn D; Shaykevich, Shimon; Haefeli, Walter E

2011-01-01

Background Clinical decision support systems can prevent knowledge-based prescription errors and improve patient outcomes. The clinical effectiveness of these systems, however, is substantially limited by poor user acceptance of presented warnings. To enhance alert acceptance it may be useful to quantify the impact of potential modulators of acceptance. Methods We built a logistic regression model to predict alert acceptance of drug–drug interaction (DDI) alerts in three different settings. Ten variables from the clinical and human factors literature were evaluated as potential modulators of provider alert acceptance. ORs were calculated for the impact of knowledge quality, alert display, textual information, prioritization, setting, patient age, dose-dependent toxicity, alert frequency, alert level, and required acknowledgment on acceptance of the DDI alert. Results 50 788 DDI alerts were analyzed. Providers accepted only 1.4% of non-interruptive alerts. For interruptive alerts, user acceptance positively correlated with frequency of the alert (OR 1.30, 95% CI 1.23 to 1.38), quality of display (4.75, 3.87 to 5.84), and alert level (1.74, 1.63 to 1.86). Alert acceptance was higher in inpatients (2.63, 2.32 to 2.97) and for drugs with dose-dependent toxicity (1.13, 1.07 to 1.21). The textual information influenced the mode of reaction and providers were more likely to modify the prescription if the message contained detailed advice on how to manage the DDI. Conclusion We evaluated potential modulators of alert acceptance by assessing content and human factors issues, and quantified the impact of a number of specific factors which influence alert acceptance. This information may help improve clinical decision support systems design. PMID:21571746

Solar space heating system at the Seeley G. Mudd Education Building, Pacific School of Religion, 1798 Scenic Avenue, Berkeley California 94708. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Large areas of south facing glass allow winter sunlight to penetrate the building, while overhangs provide summer shading. High ceilings allow deep penetration of this light for space heating and natural lighting. Massive construction stores solar radiation for evening warmth and provides a buffer from extreme temperature fluctuations. Natural ventilation will provide cooling. The system consists of 720 square feet of roof-mounted, liquid, flat plate solar collectors and three 350 gallon fiberglass storage tanks. The acceptance and performance tests are discussed. Also discusseed are: collector selection, construction contract, costs, and economics.

Abortion services at hospitals in Istanbul.

PubMed

O'Neil, Mary Lou

2017-04-01

Despite the existence of a liberal law on abortion in Turkey, there is growing evidence that actually securing an abortion in Istanbul may prove difficult. This study aimed to determine whether or not state hospitals and private hospitals that accept state health insurance in Istanbul are providing abortion services and for what indications. Between October and December 2015, a mystery patient telephone survey of 154 hospitals, 43 public and 111 private, in Istanbul was conducted. 14% of the state hospitals in Istanbul perform abortions without restriction as to reason provided in the current law while 60% provide the service if there is a medical necessity. A quarter of state hospitals in Istanbul do not provide abortion services at all. 48.6% of private hospitals that accept the state health insurance also provide for abortion without restriction while 10% do not provide abortion services under any circumstances. State and private hospitals in Istanbul are not providing abortion services to the full extent allowed under the law. The low numbers of state hospitals offering abortions without restriction indicates a de facto privatization of the service. This same trend is also visible in many private hospitals partnering with the state that do not provide abortion care. While many women may choose a private provider, the lack of provision of abortion care at state hospitals and those private hospitals working with the state leaves women little option but to purchase these services from private providers at some times subtantial costs.

Early Improper Motion Detection in Golf Swings Using Wearable Motion Sensors: The First Approach

PubMed Central

Stančin, Sara; Tomažič, Sašo

2013-01-01

This paper presents an analysis of a golf swing to detect improper motion in the early phase of the swing. Led by the desire to achieve a consistent shot outcome, a particular golfer would (in multiple trials) prefer to perform completely identical golf swings. In reality, some deviations from the desired motion are always present due to the comprehensive nature of the swing motion. Swing motion deviations that are not detrimental to performance are acceptable. This analysis is conducted using a golfer's leading arm kinematic data, which are obtained from a golfer wearing a motion sensor that is comprised of gyroscopes and accelerometers. Applying the principal component analysis (PCA) to the reference observations of properly performed swings, the PCA components of acceptable swing motion deviations are established. Using these components, the motion deviations in the observations of other swings are examined. Any unacceptable deviations that are detected indicate an improper swing motion. Arbitrarily long observations of an individual player's swing sequences can be included in the analysis. The results obtained for the considered example show an improper swing motion in early phase of the swing, i.e., the first part of the backswing. An early detection method for improper swing motions that is conducted on an individual basis provides assistance for performance improvement. PMID:23752563

Early improper motion detection in golf swings using wearable motion sensors: the first approach.

PubMed

Stančin, Sara; Tomažič, Sašo

2013-06-10

This paper presents an analysis of a golf swing to detect improper motion in the early phase of the swing. Led by the desire to achieve a consistent shot outcome, a particular golfer would (in multiple trials) prefer to perform completely identical golf swings. In reality, some deviations from the desired motion are always present due to the comprehensive nature of the swing motion. Swing motion deviations that are not detrimental to performance are acceptable. This analysis is conducted using a golfer's leading arm kinematic data, which are obtained from a golfer wearing a motion sensor that is comprised of gyroscopes and accelerometers. Applying the principal component analysis (PCA) to the reference observations of properly performed swings, the PCA components of acceptable swing motion deviations are established. Using these components, the motion deviations in the observations of other swings are examined. Any unacceptable deviations that are detected indicate an improper swing motion. Arbitrarily long observations of an individual player's swing sequences can be included in the analysis. The results obtained for the considered example show an improper swing motion in early phase of the swing, i.e., the first part of the backswing. An early detection method for improper swing motions that is conducted on an individual basis provides assistance for performance improvement.

Sorbent Scoping Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chancellor, Christopher John

2016-11-14

The Los Alamos National Laboratory–Carlsbad Operations (LANL-CO) office was tasked by the DOE CBFO, Office of the Manager to perform a review of the acceptable knowledge (AK) to identify the oxidizers and sorbents in transuranic (TRU) waste streams, to conduct scoping studies on the oxidizers and sorbents identified in AK review to inform the Quality Level 1 (QL1) testing, and to conduct a series of QL1 tests to provide the scientific data to support a basis of knowledge document for determining the criteria for (1) accepting waste at the Waste Isolation Pilot Plant (WIPP) without treatment, (2) determining waste thatmore » will require treatment, and (3) if treatment is required, how the treatment must be performed. The purpose of this report is to present the results of the AK review of sorbents present in active waste streams, provide a technical analysis of the sorbent list, report the results of the scoping studies for the fastest-burning organic sorbent, and provide the list of organic and inorganic sorbents to be used in the development of a Test Plan for Preparation and Testing of Sorbents Mixed with Oxidizer found in Transuranic Waste (DWT-TP-001). The companion report, DWT-RPT-001, Oxidizer Scoping Studies, has similar information for oxidizers identified during the AK review of TRU waste streams. The results of the oxidizer and sorbent scoping studies will be used to inform the QL1 test plan. The QL1 test results will support the development of a basis of knowledge document that will evaluate oxidizing chemicals and sorbents in TRU waste and provide guidance for treatment.« less

Predicting MCAT Examination Scores.

ERIC Educational Resources Information Center

Dawson-Saunders, Beth; And Others

Acceptable performance on the Medical College Admissions Test (MCAT) is necessary for acceptance into medical school; therefore, students planning a career in medicine and their advisors would benefit by having information useful in predicting performance on this examination. The present study examined the validity of the ACT Assessment as such a…

47 CFR 2.805 - Operation of radio frequency products prior to equipment authorization.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Evaluation of performance and determination of customer acceptability, during developmental, design, or pre... performance and determination of customer acceptability, during developmental, design, or pre-production... under the authority of an experimental radio service authorization issued under part 5 of this chapter...

Northrop Grumman HEC flight coaxial cryocoolers performance

NASA Astrophysics Data System (ADS)

Nguyen, T.; Russo, J.; Basel, G.; Chi, D.; Abelson, L.

2018-05-01

The Northrop Grumman Aerospace Systems (NGAS) has expanded the cryocooler product line to include a single stage High Efficiency Cryocooler (HEC) cooler with a coaxial pulse tube cold head that operates at temperatures down to 45K. The HEC coaxial pulse tube cooler has been adopted by several customers, and has completed acceptance testing to meet program flight requirements. The NGAS TRL 9 HEC is a pulse tube cryocooler with a flexure bearing compressor which has been delivered for a number of flight payloads that are currently operating in space. To date, NGAS has delivered space cryocoolers in several configurations including single stage with a linear cold head and two stage with both linear and coaxial cold heads. The new HEC coaxial cooler uses the same TRL9 HEC compressor with a passive pulse tube cold head, to maintain the flight heritage of the HEC linear cooler. In this paper, we present the flight acceptance test data of the HEC coaxial cryocooler, which includes thermal performance, launch vibration and thermal cycling. The HEC coaxial cooler has demonstrated excellent performance in family with the flight qualified HEC linear cooler. The HEC coaxial cooler provides users with additional flexibility in selecting the cold head configuration to meet their particular applications.

Parental acceptability of contraceptive methods offered to their teen during a confidential health care visit.

PubMed

Hartman, Lauren B; Shafer, Mary-Ann; Pollack, Lance M; Wibbelsman, Charles; Chang, Fay; Tebb, Kathleen P

2013-02-01

To examine parental acceptability of contraceptive methods offered confidentially to their adolescent daughter. A random sample of 261 parents/guardians with a daughter aged 12-17 years completed a telephone survey examining the relationship between parental acceptability of seven contraceptive methods and adolescents' likelihood to have sex, parenting beliefs, parents' sexual health as teens, sexually transmitted infection knowledge, and demographic factors. Acceptability was highest for oral contraceptive pills (59%) and lowest for intrauterine device (18%). Parental acceptance of teens' autonomy was significantly associated with increased acceptability of all methods. Parental knowledge of sexually transmitted infections was poor, and 51% found it acceptable for clinicians to provide their sexually active teen with condoms. Parents were more accepting of oral contraceptive pills and condoms compared with intrauterine devices and implants. Parental recognition of their teen's autonomy was associated with greater parental acceptability of clinicians providing their adolescent with contraceptives (regardless of the specific type of method being offered). Copyright © 2013 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Control system health test system and method

DOEpatents

Hoff, Brian D.; Johnson, Kris W.; Akasam, Sivaprasad; Baker, Thomas M.

2006-08-15

A method is provided for testing multiple elements of a work machine, including a control system, a component, a sub-component that is influenced by operations of the component, and a sensor that monitors a characteristic of the sub-component. In one embodiment, the method is performed by the control system and includes sending a command to the component to adjust a first parameter associated with an operation of the component. Also, the method includes detecting a sensor signal from the sensor reflecting a second parameter associated with a characteristic of the sub-component and determining whether the second parameter is acceptable based on the command. The control system may diagnose at least one of the elements of the work machine when the second parameter of the sub-component is not acceptable.

General regression neural network model for behavior of Salmonella on chicken meat during cold storage.

PubMed

Oscar, Thomas P

2014-05-01

A study was undertaken to investigate and model behavior of Salmonella on chicken meat during cold storage at constant temperatures. Chicken meat (white, dark, or skin) portions (0.75 cm(3)) were inoculated with a single strain of Salmonella Typhimurium DT104 (2.8 log) followed by storage for 0 to 8 d at -8, 0, 8, 12, 14, or 16 °C for model development and at -4, 4, 10, or 14 °C for model validation. A general regression neural network model was developed with commercial software. Performance of the model was considered acceptable when the proportion of residuals (observed--predicted) in an acceptable prediction zone (pAPZ) from -1 log (fail-safe) to 0.5 logs (fail-dangerous) was ≥ 0.7. Growth of Salmonella Typhimurium DT104 on chicken meat was observed at 12, 14, and 16 °C and was highest on dark meat, intermediate on skin, and lowest on white meat. At lower temperatures (-8 to 10 °C) Salmonella Typhimurium DT104 remained at initial levels throughout 8 d of storage except at 4 °C where there was a small (0.4 log) but significant decline. The model had acceptable performance (pAPZ = 0.929) for dependent data (n = 482) and acceptable performance (pAPZ = 0.923) for independent data (n = 235). Results indicated that it is important to include type of meat as an independent variable in the model and that the model provided valid predictions of the behavior of Salmonella Typhimurium DT104 on chicken skin, white, and dark meat during storage for 0 to 8 d at constant temperatures from -8 to 16 °C. A model for predicting behavior of Salmonella on chicken meat during cold storage was developed and validated. The model will help the chicken industry to better predict and manage this risk to public health. Journal of Food Science © 2014 Institute of Food Technologists® No claim to original US government works.

Bench-Scale Testing and Process Performance Projections of CO2 Capture by CO2–Binding Organic Liquids (CO2BOLs) With and Without Polarity-Swing-Assisted Regeneration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, Feng; Heldebrant, David J.; Mathias, Paul M.

This manuscript provides a detailed analysis of a continuous flow, bench scale study of the CO2BOL solvent platform with and without its Polarity Swing Assisted Regeneration (PSAR). This study encompassed four months of continuous flow testing of a candidate CO2BOL with a thermal regeneration and PSAR regeneration using decane antisolvent. In both regeneration schemes, steady state capture of >90 %CO2 was achieved using simulated flue gas at acceptable L/G ratios. Aspen Plus™ modeling was performed to assess process performance compared to previous equilibrium performance projections. This paper also includes net power projections, and comparisons to DOE’s Case 10 amine baseline.

Delivery system integration and health care spending and quality for Medicare beneficiaries.

PubMed

McWilliams, J Michael; Chernew, Michael E; Zaslavsky, Alan M; Hamed, Pasha; Landon, Bruce E

2013-08-12

The Medicare accountable care organization (ACO) programs rely on delivery system integration and health care provider risk sharing to lower spending while improving quality of care. To compare spending and quality between larger and smaller provider groups and examine how size-related differences vary by 2 factors considered central to ACO performance: group primary care orientation and financial risk sharing by health care providers. Using 2009 Medicare claims and linked American Medical Association Group Practice data, we assigned 4.29 million beneficiaries to health care provider groups based on primary care use. We categorized group size according to eligibility thresholds for the Shared Savings (≥5000 assigned beneficiaries) and Pioneer (≥15,000) ACO programs and distinguished hospital-based from independent groups. We assessed the primary care orientation of larger groups' specialty mix and used health maintenance organization market penetration and data from the Community Tracking Study to measure the extent of financial risk accepted by different types of provider groups in different areas for managed care patients. We estimated linear regression models comparing spending and quality between larger and smaller health care provider groups, allowing size-related differences to vary by measures of group primary care orientation and risk sharing. Spending and quality measures included total medical spending, spending by type of service, 5 process measures of quality, and 30-day readmissions, all adjusted for sociodemographic and clinical characteristics. Compared with smaller groups, larger hospital-based groups had higher total per-beneficiary spending in 2009 (mean difference, +$849), higher 30-day readmission rates (+1.3 percentage points), and similar performance on 4 of 5 process measures of quality. In contrast, larger independent physician groups performed better than smaller groups on all process measures and exhibited significantly lower per-beneficiary spending in counties where risk sharing by these groups was more common (-$426). Among all groups sufficiently large to participate in ACO programs, a strong primary care orientation was associated with lower spending, fewer readmissions, and better quality of diabetes care. Spending was lower and quality of care better for Medicare beneficiaries served by larger independent physician groups with strong primary care orientations in environments where health care providers accepted greater risk.

A summary of the mechanical design, testing and performance of the IMP-H and J attitude control systems

NASA Technical Reports Server (NTRS)

Metzger, J. R.

1974-01-01

The main aspects of the attitude control system used on both the IMP-H and J spacecraft are presented. The mechanical configuration is described. Information on all the specific components comprising the flight system is provided. The acceptance and qualification testing of both individual components and the installed system are summarized. Functional information regarding the operation and performance in relation to the orbiting spacecraft and its mission is included. Related topics which are discussed are: (1) safety requirements, (2) servicing procedures, (3) anomalous behavior, and (4) pyrotechnic devices.

Feasibility model of a high reliability five-year tape transport, Volume 1. [development, performance, and test results

NASA Technical Reports Server (NTRS)

Eshleman, R. L.; Meyers, A. P.; Davidson, W. A.; Gortowski, R. C.; Anderson, M. E.

1973-01-01

The development, performance, and test results for the spaceborne magnetic tape transport are discussed. An analytical model of the tape transport was used to optimize its conceptual design. Each of the subsystems was subjected to reliability analyses which included structural integrity, maintenance of system performance within acceptable bounds, and avoidance of fatigue failure. These subsystems were also compared with each other in order to evaluate reliability characteristics. The transport uses no mechanical couplings. Four drive motors, one for each reel and one for each of two capstans, are used in a differential mode. There are two hybrid, spherical, cone tapered-crown rollers for tape guidance. Storage of the magnetic tape is provided by a reel assembly which includes the reel, a reel support structure and bearings, dust seals, and a dc drive motor. A summary of transport test results on tape guidance, flutter, and skew is provided.

Preliminary Report on Oak Ridge National Laboratory Testing of Drake/ACSS/MA2/E3X

DOE Office of Scientific and Technical Information (OSTI.GOV)

Irminger, Philip; King, Daniel J.; Herron, Andrew N.

2016-01-01

A key to industry acceptance of a new technology is extensive validation in field trials. The Powerline Conductor Accelerated Test facility (PCAT) at Oak Ridge National Laboratory (ORNL) is specifically designed to evaluate the performance and reliability of a new conductor technology under real world conditions. The facility is set up to capture large amounts of data during testing. General Cable used the ORNL PCAT facility to validate the performance of TransPowr with E3X Technology a standard overhead conductor with an inorganic high emissivity, low absorptivity surface coating. Extensive testing has demonstrated a significant improvement in conductor performance across amore » wide range of operating temperatures, indicating that E3X Technology can provide a reduction in temperature, a reduction in sag, and an increase in ampacity when applied to the surface of any overhead conductor. This report provides initial results of that testing.« less

Electric vehicle drive systems

NASA Astrophysics Data System (ADS)

Appleyard, M.

1992-01-01

New legislation in the State of California requires that 2% of vehicles sold there from 1998 will be 'zero-emitting'. This provides a unique market opportunity for developers of electric vehicles but substantial improvements in the technology are probably required if it is to be successfully exploited. There are around a dozen types of battery that are potentially relevant to road vehicles but, at the present, lead/acid and sodium—sulphur come closest to combining acceptable performance, life and cost. To develop an efficient, lightweight electric motor system requires up-to-date techniques of magnetics design, and the latest power-electronic and microprocessor control methods. Brushless machines, coupled with solid-state inverters, offer the most economical solution for mass production, even though their development costs are higher than for direct-current commutator machines. Fitted to a small car, even the highest energy-density batteries will only provide around 200 km average range before recharging. Therefore, some form of supplementary on-board power generation will probably be needed to secure widespread acceptance by the driving public. Engine-driven generators of quite low power can achieve useful increases in urban range but will fail to qualify as 'zero-emitting'. On the other hand, if the same function could be economically performed by a small fuel-cell using hydrogen derived from a methanol reformer, then most of the flexibility provided by conventional vehicles would be retained. The market prospects for electric cars would then be greatly enhanced and their dependence on very advanced battery technology would be reduced.

Acceptance Inspection for Audio Cassette Recorders.

ERIC Educational Resources Information Center

Smith, Edgar A.

A series of inspections for cassette recorders that can be performed to assure that the devices are acceptable is described. The inspections can be completed in 20 minutes and can be performed by instructional personnel. The series of inspection procedures includes tests of the intelligibility of audio, physical condition, tape speed, impulse…

Accountability Policies and Teachers' Acceptance and Usage of School Performance Feedback--A Comparative Study

ERIC Educational Resources Information Center

Maier, Uwe

2010-01-01

This paper implemented a comparative approach to investigate the relationships between test-based school accountability policies in 2 German states and teachers' acceptance and usage of feedback information. Thuringia implemented mandatory tests for secondary schools based on competency modeling and performance data controlled for socioeconomic…

46 CFR 164.023-13 - Production tests and inspections.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Constant Rate of Traverse tensile testing machine, capable of initial clamp separation of ten inches and a... the acceptance testing values but not less than the performance minimums. (2) Length/weight values must be within 5 percent of the acceptance testing values but not less than the performance minimums...

The influence of welfare systems on pay-for-performance programs for general practitioners: A critical review.

PubMed

Ammi, Mehdi; Fortier, Grant

2017-04-01

While pay-for-performance (P4P) programs are increasingly common tools used to foster quality and efficiency in primary care, the evidence concerning their effectiveness is at best mixed. In this article, we explore the influence of welfare systems on four P4P-related dimensions: the level of healthcare funders' commitment to P4Ps (by funding and length of program operation), program design (specifically target-based vs. participation-based program), physicians' acceptance of the program and program effects. Using Esping-Andersen's typology, we examine P4P for general practitioners (GPs) in thirteen European and North American countries and find that welfare systems contribute to explain variations in P4P experiences. Overall, liberal systems exhibited the most enthusiastic adoption of P4P, with significant physician acceptance, generous incentives and positive but modest program effects. Social democratic countries showed minimal interest in P4P for GPs, with the exception of Sweden. Although corporatist systems adopted performance pay, these countries experienced mixed results, with strong physician opposition. In response to this opposition, health care funders tended to favour participation-based over target-based P4P. We demonstrate how the interaction of decommodification and social stratification in each welfare regime influences these countries' experiences with P4P for GPs, directly for funders' commitment, program design and physicians' acceptance, and indirectly for program effects, hence providing a framework for analyzing P4P in other contexts or care settings. Copyright © 2017 Elsevier Ltd. All rights reserved.

Understanding and acceptability by Hispanic consumers of four front-of-pack food labels.

PubMed

De la Cruz-Góngora, Vanessa; Torres, Pilar; Contreras-Manzano, Alejandra; Jáuregui de la Mota, Alejandra; Mundo-Rosas, Verónica; Villalpando, Salvador; Rodríguez-Oliveros, Guadalupe

2017-03-07

Front-of-pack food labels (FOPL) can help consumers make healthy and informed food choices. FOPL are used in the food market but evaluations of their understanding and acceptability are scanty. This study aimed to explore the subjective understanding and acceptability of four FOPL among Hispanic consumers. A qualitative study was conducted in six States of Mexico, in 18 urban elementary schools. A purposive sample of 135 parents of fifth-grade children was selected. Four FOPL were assessed: Logos, Rating Stars, Guideline Daily Allowances (GDA's), and Multiple Traffic Lights (MTL). Trained interviewers performed 18 focus groups with the participants, using an interview guide. Participants were asked about their subjective understanding and acceptability of the FOPL, displaying 16 generic breakfast cereal boxes designed for this study (four for each FOPL), varying in their nutritional value. Afterwards, participants were asked to choose among the four cereal boxes the one to best communicate the product healthiness and their reasons for choice, proposals for improving the FOPL, and desirable characteristics for new FOPL. Finally, a socio-demographic questionnaire was applied. Thematic analysis of the transcriptions of the focus groups was performed, using Altlas.tiV5 software. Logos were perceived as easy to understand, highly acceptable, and useful for decision-making; institutional endorsement of Logos was related to greater confidence in the label. The GDA's were hard to understand considering the nutritional knowledge and time needed for interpretation. The Rating Stars were related to the quality in businesses rather than foods. The MTL were viewed as indicating the high/low content of specific nutrients, but the meaning of the amber color was not fully understood. Participants highlighted the need for a simple FOPL that allows easily identification of healthy products while considering food purchasing time limitations and interpretation of food portions. Logos with an institutional endorsement was the best understood and accepted FOPL, and the GDA's and Rating Stars were the least. Our findings provide valuable insights about Hispanic consumers´ perceptions regarding FOPL and to guide public health policy. Further studies are needed in populations with chronic diseases and diverse social contexts.

Acceptance criteria for urban dispersion model evaluation

NASA Astrophysics Data System (ADS)

Hanna, Steven; Chang, Joseph

2012-05-01

The authors suggested acceptance criteria for rural dispersion models' performance measures in this journal in 2004. The current paper suggests modified values of acceptance criteria for urban applications and tests them with tracer data from four urban field experiments. For the arc-maximum concentrations, the fractional bias should have a magnitude <0.67 (i.e., the relative mean bias is less than a factor of 2); the normalized mean-square error should be <6 (i.e., the random scatter is less than about 2.4 times the mean); and the fraction of predictions that are within a factor of two of the observations (FAC2) should be >0.3. For all data paired in space, for which a threshold concentration must always be defined, the normalized absolute difference should be <0.50, when the threshold is three times the instrument's limit of quantification (LOQ). An overall criterion is then applied that the total set of acceptance criteria should be satisfied in at least half of the field experiments. These acceptance criteria are applied to evaluations of the US Department of Defense's Joint Effects Model (JEM) with tracer data from US urban field experiments in Salt Lake City (U2000), Oklahoma City (JU2003), and Manhattan (MSG05 and MID05). JEM includes the SCIPUFF dispersion model with the urban canopy option and the urban dispersion model (UDM) option. In each set of evaluations, three or four likely options are tested for meteorological inputs (e.g., a local building top wind speed, the closest National Weather Service airport observations, or outputs from numerical weather prediction models). It is found that, due to large natural variability in the urban data, there is not a large difference between the performance measures for the two model options and the three or four meteorological input options. The more detailed UDM and the state-of-the-art numerical weather models do provide a slight improvement over the other options. The proposed urban dispersion model acceptance criteria are satisfied at over half of the field experiments.

Clinically Useful Spirometry in Preschool-Aged Children: Evaluation of the 2007 American Thoracic Society Guidelines

PubMed Central

Gaffin, Jonathan M.; Shotola, Nancy Lichtenberg; Martin, Thomas R.; Phipatanakul, Wanda

2010-01-01

Rationale In 2007 the American Thoracic Society (ATS) recommended guidelines for acceptability and repeatability for assessing spirometry in preschool children. The authors aim to determine the feasibility of spirometry among children in this age group performing spirometry for the first time in a busy clinical practice. Methods First-time spirometry for children age 4 to 5 years old was selected from the Children’s Hospital Boston Pulmonary Function Test (PFT) database. Maneuvers were deemed acceptable if (1) the flow-volume loop showed rapid rise and smooth descent; (2) the back extrapolated volume (Vbe), the volume leaked by a subject prior to the forced maneuver, was ≤80 ml and 12.5% of forced vital capacity (FVC); and (3) cessation of expiratory flow was at a point ≤10% of peak expiratory flow rate (PEFR). Repeatability was determined by another acceptable maneuver with forced expiratory volume in t seconds (FEVt) and FVC within 10% or 0.1 L of the best acceptable maneuver. Post hoc analysis compared spirometry values for those with asthma and cystic fibrosis to normative values. Results Two hundred and forty-eight preschool children performed spirometry for the first time between August 26, 2006, and August 25, 2008. At least one technically acceptable maneuver was found in 82.3% (n = 204) of the tests performed. Overall, 54% of children were able to perform acceptable and repeatable spirometry based on the ATS criteria. Children with asthma or cystic fibrosis did not have spirometry values that differed significantly from healthy controls. However, up to 29% of the overall cohort displayed at least one abnormal spirometry value. Conclusions Many preschool-aged children are able to perform technically acceptable and repeatable spirometry under normal conditions in a busy clinical setting. Spirometry may be a useful screen for abnormal lung function in this age group. PMID:20653495

Analyzing older users' home telehealth services acceptance behavior-applying an Extended UTAUT model.

PubMed

Cimperman, Miha; Makovec Brenčič, Maja; Trkman, Peter

2016-06-01

Although telehealth offers an improved approach to providing healthcare services, its adoption by end users remains slow. With an older population as the main target, these traditionally conservative users pose a big challenge to the successful implementation of innovative telehealth services. The objective of this study was to develop and empirically test a model for predicting the factors affecting older users' acceptance of Home Telehealth Services (HTS). A survey instrument was administered to 400 participants aged 50 years and above from both rural and urban environments in Slovenia. Structural equation modeling was applied to analyze the causal effect of seven hypothesized predicting factors. HTS were introduced as a bundle of functionalities, representing future services that currently do not exist. This enabled users' perceptions to be measured on the conceptual level, rather than attitudes to a specific technical solution. Six relevant predictors were confirmed in older users' HTS acceptance behavior, with Performance Expectancy (r=0.30), Effort Expectancy (r=0.49), Facilitating Conditions (r=0.12), and Perceived Security (r=0.16) having a direct impact on behavioral intention to use HTS. In addition, Computer Anxiety is positioned as an antecedent of Effort Expectancy with a strong negative influence (r=-0.61), and Doctor's Opinion influence showed a strong impact on Performance Expectancy (r=0.31). The results also indicate Social Influence as an irrelevant predictor of acceptance behavior. The model of six predictors yielded 77% of the total variance explained in the final measured Behavioral Intention to Use HTS by older adults. The level at which HTS are perceived as easy to use and manage is the leading acceptance predictor in older users' HTS acceptance. Together with Perceived Usefulness and Perceived Security, these three factors represent the key influence on older people's HTS acceptance behavior. When promoting HTS, interventions should focus to portray it as secure. Marketing interventions should focus also on promoting HTS among health professionals, using them as social agents to frame the services as useful and beneficial. The important role of computer anxiety may result in a need to use different equipment such as a tablet computer to access HTS. Finally, this paper introduces important methodological guidelines for measuring perceptions on a conceptual level of future services that currently do not exist. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

PEM-INST-001: Instructions for Plastic Encapsulated Microcircuit (PEM) Selection, Screening, and Qualification

NASA Technical Reports Server (NTRS)

Teverovsky, Alexander; Sahu, Kusum

2003-01-01

Potential users of plastic encapsulated microcircuits (PEMs) need to be reminded that unlike the military system of producing robust high-reliability microcircuits that are designed to perform acceptably in a variety of harsh environments, PEMs are primarily designed for use in benign environments where equipment is easily accessed for repair or replacement. The methods of analysis applied to military products to demonstrate high reliability cannot always be applied to PEMs. This makes it difficult for users to characterize PEMs for two reasons: 1. Due to the major differences in design and construction, the standard test practices used to ensure that military devices are robust and have high reliability often cannot be applied to PEMs that have a smaller operating temperature range and are typically more frail and susceptible to moisture absorption. In contrast, high-reliability military microcircuits usually utilize large, robust, high-temperature packages that are hermetically sealed. 2. Unlike the military high-reliability system, users of PEMs have little visibility into commercial manufacturers proprietary design, materials, die traceability, and production processes and procedures. There is no central authority that monitors PEM commercial product for quality, and there are no controls in place that can be imposed across all commercial manufacturers to provide confidence to high-reliability users that a common acceptable level of quality exists for all PEMs manufacturers. Consequently, there is no guaranteed control over the type of reliability that is built into commercial product, and there is no guarantee that different lots from the same manufacturer are equally acceptable. And regarding application, there is no guarantee that commercial products intended for use in benign environments will provide acceptable performance and reliability in harsh space environments. The qualification and screening processes contained in this document are intended to detect poor-quality lots and screen out early random failures from use in space flight hardware. However, since it cannot be guaranteed that quality was designed and built into PEMs that are appropriate for space applications, users cannot screen in quality that may not exist. It must be understood that due to the variety of materials, processes, and technologies used to design and produce PEMs, this test process may not accelerate and detect all failure mechanisms. While the tests herein will increase user confidence that PEMs with otherwise unknown reliability can be used in space environments, such testing may not guarantee the same level of reliability offered by military microcircuits. PEMs should only be used where due to performance needs there are no alternatives in the military high-reliability market, and projects are willing to accept higher risk.

Software Manages Documentation in a Large Test Facility

NASA Technical Reports Server (NTRS)

Gurneck, Joseph M.

2001-01-01

The 3MCS computer program assists and instrumentation engineer in performing the 3 essential functions of design, documentation, and configuration management of measurement and control systems in a large test facility. Services provided by 3MCS are acceptance of input from multiple engineers and technicians working at multiple locations;standardization of drawings;automated cross-referencing; identification of errors;listing of components and resources; downloading of test settings; and provision of information to customers.

2D materials for renewable energy storage devices: Outlook and challenges.

PubMed

Sahoo, Ramkrishna; Pal, Anjali; Pal, Tarasankar

2016-11-15

Scientists are looking for cost-effective, clean and durable alternative energy devices. Superior charge storage devices can easily meet the demands of our daily needs. In this respect, a material with suitable dimensions for charge storage devices has been considered to be very important. Improved performance of charge storage devices has been derived from whole-body participation and the best are from 2D materials, which provide a viable and acceptable solution.

Portable oxygen subsystem. [design analysis and performance tests

NASA Technical Reports Server (NTRS)

1975-01-01

The concept and design of a portable oxygen device for use in the space shuttle orbiter is presented. Hardware fabrication and acceptance tests (i.e., breadboard models) are outlined and discussed. Optimization of the system (for weight, volume, safety, costs) is discussed. The device is of the rebreather type, and provides a revitalized breathing gas supply to a crewman for denitrogenization and emergency activities. Engineering drawings and photographs of the device are shown.

Human-In-The-Loop Experimental Research for Detect and Avoid

NASA Technical Reports Server (NTRS)

Consiglio, Maria; Munoz, Cesar; Hagen, George; Narkawicz, Anthony; Upchurch, Jason; Comstock, James; Ghatas, Rania; Vincent, Michael; Chamberlain, James

2015-01-01

This paper describes a Detect and Avoid (DAA) concept for integration of UAS into the NAS developed by the National Aeronautics and Space Administration (NASA) and provides results from recent human-in-the-loop experiments performed to investigate interoperability and acceptability issues associated with these vehicles and operations. The series of experiments was designed to incrementally assess critical elements of the new concept and the enabling technologies that will be required.

Impact on quality activities of measurement systems meeting an L:1 rule

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamada, M. S.; Burkhardt, J. H.

2016-04-01

This study considers the impact of a measurement system that meets an L:1 rule on various quality activities. These activities include inspection, acceptance sampling, and control charting. A measurement system that meets a 10:1 rule performs much better than one that meets a 4:1 rule. R code is provided so that the practitioner is able to evaluate these activities to his or her particular situation.

Joint Winter Runway Friction Program Accomplishments

NASA Technical Reports Server (NTRS)

Yager, Thomas J.; Wambold, James C.; Henry, John J.; Andresen, Arild; Bastian, Matthew

2002-01-01

The major program objectives are: (1) harmonize ground vehicle friction measurements to report consistent friction value or index for similar contaminated runway conditions, for example, compacted snow, and (2) establish reliable correlation between ground vehicle friction measurements and aircraft braking performance. Accomplishing these objectives would give airport operators better procedures for evaluating runway friction and maintaining acceptable operating conditions, providing pilots information to base go/no go decisions, and would contribute to reducing traction-related aircraft accidents.

C(G)-Band and X(I)-Band Noncoherent Radar Transponder Performance Specification Standard

DTIC Science & Technology

2014-06-01

transmitter with an integral power supply. The transponder must accept interrogation signals from single or multiple radar sets and provide a...the transponder receives a coded pulse interrogation from the ground radar and transmits a single pulse reply in the same frequency band. The...obtained by using either a single tracking station or several tracking stations along the flight path of the target vehicle. The accuracy gained by use

Water table tests of proposed heat transfer tunnels for small turbine vanes

NASA Technical Reports Server (NTRS)

Meitner, P. L.

1974-01-01

Water-table flow tests were conducted for proposed heat-transfer tunnels which were designed to provide uniform flow into their respective test sections of a single core engine turbine vane and a full annular ring of helicopter turbine vanes. Water-table tests were also performed for the single-vane test section of the core engine tunnel. The flow in the heat-transfer tunnels was shown to be acceptable.

Searching for a Role of Nursing Personnel in Developing Landscape of Ehealth: Factors Determining Attitudes toward Key Patient Empowering Applications.

PubMed

Duplaga, Mariusz

2016-01-01

Nurses may play an important role in the delivery of medical services based on the use of ehealth tools. Nevertheless, their taking an active role in an ehealth environment depends on their possessing the appropriate skills and mindset. The main objective of this paper was to assess nurses' opinions and to analyze the predictors of their acceptance of ehealth features relevant to patient empowerment with a strong focus on chronic care. A survey was conducted among nurses from hospital centers of south-eastern Poland based on a questionnaire designed to assess their attitudes toward the ehealth domain. The predictors of the nurses' acceptance of ehealth usage within specific contexts were assessed with uni- and multivariate logistic regression. An analysis was performed on data from 648 questionnaires retained after a quality check. The duration of Internet use was consistently related to higher acceptance of ehealth applications and more certainty regarding the reliability of health-related information available on the Internet. Nurses from urban medical centers were more skeptical about the use of specific ehealth solutions. Previous experience in using information technologies is the main factor influencing the acceptance of specific ehealth solutions relevant for care provided to patients suffering from chronic conditions.

Enhanced Oceanic Operations Human-In-The-Loop In-Trail Procedure Validation Simulation Study

NASA Technical Reports Server (NTRS)

Murdoch, Jennifer L.; Bussink, Frank J. L.; Chamberlain, James P.; Chartrand, Ryan C.; Palmer, Michael T.; Palmer, Susan O.

2008-01-01

The Enhanced Oceanic Operations Human-In-The-Loop In-Trail Procedure (ITP) Validation Simulation Study investigated the viability of an ITP designed to enable oceanic flight level changes that would not otherwise be possible. Twelve commercial airline pilots with current oceanic experience flew a series of simulated scenarios involving either standard or ITP flight level change maneuvers and provided subjective workload ratings, assessments of ITP validity and acceptability, and objective performance measures associated with the appropriate selection, request, and execution of ITP flight level change maneuvers. In the majority of scenarios, subject pilots correctly assessed the traffic situation, selected an appropriate response (i.e., either a standard flight level change request, an ITP request, or no request), and executed their selected flight level change procedure, if any, without error. Workload ratings for ITP maneuvers were acceptable and not substantially higher than for standard flight level change maneuvers, and, for the majority of scenarios and subject pilots, subjective acceptability ratings and comments for ITP were generally high and positive. Qualitatively, the ITP was found to be valid and acceptable. However, the error rates for ITP maneuvers were higher than for standard flight level changes, and these errors may have design implications for both the ITP and the study's prototype traffic display. These errors and their implications are discussed.

User perception and experience of the introduction of a novel critical care patient viewer in the ICU setting.

PubMed

Dziadzko, Mikhail A; Herasevich, Vitaly; Sen, Ayan; Pickering, Brian W; Knight, Ann-Marie A; Moreno Franco, Pablo

2016-04-01

Failure to rapidly identify high-value information due to inappropriate output may alter user acceptance and satisfaction. The information needs for different intensive care unit (ICU) providers are not the same. This can obstruct successful implementation of electronic medical record (EMR) systems. We evaluated the implementation experience and satisfaction of providers using a novel EMR interface-based on the information needs of ICU providers-in the context of an existing EMR system. This before-after study was performed in the ICU setting at two tertiary care hospitals from October 2013 through November 2014. Surveys were delivered to ICU providers before and after implementation of the novel EMR interface. Overall satisfaction and acceptance was reported for both interfaces. A total of 246 before (existing EMR) and 115 after (existing EMR+novel EMR interface) surveys were analyzed. 14% of respondents were prescribers and 86% were non-prescribers. Non-prescribers were more satisfied with the existing EMR, whereas prescribers were more satisfied with the novel EMR interface. Both groups reported easier data gathering, routine tasks & rounding, and fostering of team work with the novel EMR interface. This interface was the primary tool for 18% of respondents after implementation and 73% of respondents intended to use it further. Non-prescribers reported an intention to use this novel interface as their primary tool for information gathering. Compliance and acceptance of new system is not related to previous duration of work in ICU, but ameliorates with the length of EMR interface usage. Task-specific and role-specific considerations are necessary for design and successful implementation of a EMR interface. The difference in user workflows causes disparity of the way of EMR data usage. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Optimizing probability of detection point estimate demonstration

NASA Astrophysics Data System (ADS)

Koshti, Ajay M.

2017-04-01

The paper provides discussion on optimizing probability of detection (POD) demonstration experiments using point estimate method. The optimization is performed to provide acceptable value for probability of passing demonstration (PPD) and achieving acceptable value for probability of false (POF) calls while keeping the flaw sizes in the set as small as possible. POD Point estimate method is used by NASA for qualifying special NDE procedures. The point estimate method uses binomial distribution for probability density. Normally, a set of 29 flaws of same size within some tolerance are used in the demonstration. Traditionally largest flaw size in the set is considered to be a conservative estimate of the flaw size with minimum 90% probability and 95% confidence. The flaw size is denoted as α90/95PE. The paper investigates relationship between range of flaw sizes in relation to α90, i.e. 90% probability flaw size, to provide a desired PPD. The range of flaw sizes is expressed as a proportion of the standard deviation of the probability density distribution. Difference between median or average of the 29 flaws and α90 is also expressed as a proportion of standard deviation of the probability density distribution. In general, it is concluded that, if probability of detection increases with flaw size, average of 29 flaw sizes would always be larger than or equal to α90 and is an acceptable measure of α90/95PE. If NDE technique has sufficient sensitivity and signal-to-noise ratio, then the 29 flaw-set can be optimized to meet requirements of minimum required PPD, maximum allowable POF, requirements on flaw size tolerance about mean flaw size and flaw size detectability requirements. The paper provides procedure for optimizing flaw sizes in the point estimate demonstration flaw-set.

Gynecologic Oncology Group quality assurance audits: analysis and initiatives for improvement.

PubMed

Blessing, John A; Bialy, Sally A; Whitney, Charles W; Stonebraker, Bette L; Stehman, Frederick B

2010-08-01

The Gynecologic Oncology Group (GOG) is a multi-institution, multi-discipline Cooperative Group funded by the National Cancer Institute (NCI) to conduct clinical trials which investigate the treatment, prevention, control, quality of survivorship, and translational science of gynecologic malignancies. In 1982, the NCI initiated a program of on-site quality assurance audits of participating institutions. Each is required to be audited at least once every 3 years. In GOG, the audit mandate is the responsibility of the GOG Quality Assurance Audit Committee and it is centralized in the Statistical and Data Center (SDC). Each component (Regulatory, Investigational Drug Pharmacy, Patient Case Review) is classified as Acceptable, Acceptable, follow-up required, or Unacceptable. To determine frequently occurring deviations and develop focused innovative solutions to address them. A database was created to examine the deviations noted at the most recent audit conducted at 57 GOG parent institutions during 2004-2007. Cumulatively, this involved 687 patients and 306 protocols. The results documented commendable performance: Regulatory (39 Acceptable, 17 Acceptable, follow-up, 1 Unacceptable); Pharmacy (41 Acceptable, 3 Acceptable, follow-up, 1 Unacceptable, 12 N/A): Patient Case Review (31 Acceptable, 22 Acceptable, follow-up, 4 Unacceptable). The nature of major and lesser deviations was analyzed to create and enhance initiatives for improvement of the quality of clinical research. As a result, Group-wide proactive initiatives were undertaken, audit training sessions have emphasized recurring issues, and GOG Data Management Subcommittee agendas have provided targeted instruction and training. The analysis was based upon parent institutions only; affiliate institutions and Community Clinical Oncology Program participants were not included, although it is assumed their areas of difficulty are similar. The coordination of the GOG Quality Assurance Audit program in the SDC has improved data quality by enhancing our ability to identify frequently occurring deviations and develop innovative solutions to avoid or minimize their occurrence in the future.

From Triple to Quadruple Aim: Care of the Patient Requires Care of the Provider

PubMed Central

Bodenheimer, Thomas; Sinsky, Christine

2014-01-01

The Triple Aim—enhancing patient experience, improving population health, and reducing costs—is widely accepted as a compass to optimize health system performance. Yet physicians and other members of the health care workforce report widespread burnout and dissatisfaction. Burnout is associated with lower patient satisfaction, reduced health outcomes, and it may increase costs. Burnout thus imperils the Triple Aim. This article recommends that the Triple Aim be expanded to a Quadruple Aim, adding the goal of improving the work life of health care providers, including clinicians and staff. PMID:25384822

Methodology development for evaluation of selective-fidelity rotorcraft simulation

NASA Technical Reports Server (NTRS)

Lewis, William D.; Schrage, D. P.; Prasad, J. V. R.; Wolfe, Daniel

1992-01-01

This paper addressed the initial step toward the goal of establishing performance and handling qualities acceptance criteria for realtime rotorcraft simulators through a planned research effort to quantify the system capabilities of 'selective fidelity' simulators. Within this framework the simulator is then classified based on the required task. The simulator is evaluated by separating the various subsystems (visual, motion, etc.) and applying corresponding fidelity constants based on the specific task. This methodology not only provides an assessment technique, but also provides a technique to determine the required levels of subsystem fidelity for a specific task.

Human factors considerations for the use of color in display systems

NASA Technical Reports Server (NTRS)

Demars, S. A.

1975-01-01

Identified and assessed are those human factor considerations impacting an operator's ability to perform when information is displayed in color as contrasted to monochrome (black and white only). The findings provide valuable guidelines for the assessment of the advantages (and disadvantages) of using a color display system. The use of color provides an additional sensory channel (color perception) which is not available with black and white. The degree to which one can exploit the use of this channel is highly dependent on available display technology, mission information display requirements, and acceptable operational modes.

42 CFR 489.11 - Acceptance of a provider as a participant.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 5 2011-10-01 2011-10-01 false Acceptance of a provider as a participant. 489.11 Section 489.11 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION PROVIDER AGREEMENTS AND SUPPLIER APPROVAL General...

42 CFR 489.11 - Acceptance of a provider as a participant.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Acceptance of a provider as a participant. 489.11 Section 489.11 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION PROVIDER AGREEMENTS AND SUPPLIER APPROVAL General...

A mixed methods evaluation of yoga as a fall prevention strategy for older people in India.

PubMed

Keay, Lisa; Praveen, Devarsetty; Salam, Abdul; Rajasekhar, K V; Tiedemann, Anne; Thomas, Vimala; Jagnoor, Jagnoor; Sherrington, Cathie; Ivers, Rebecca Q

2018-01-01

Falls are an emerging public health issue in India, with the impact set to rise as the population ages. We sought to evaluate the acceptability, feasibility and likely impact of a yoga-based program aimed at improving balance and mobility for older residents in urban India. Fifty local residents aged 60 years and older were recruited from urban Hyderabad, Andhra Pradesh. They were invited to attend a 1-h yoga class, twice weekly for 3 months. Mixed methods were used to evaluate the acceptability and feasibility (qualitative) and likely impact (quantitative). Two focus groups and eight interviews with participants were conducted to evaluate the acceptability and feasibility of a yoga program. Thematic analysis was conducted in context of perceptions, barriers and benefits of yoga participation and fall ascertainment. Physical performance using the Short Physical Performance Battery, fear of falling, blood pressure and weight loss were measured before and after the program. The interviews and focus groups provided insights into the preferred format for classes, including session times, level of supervision and location. Improvements were seen in the Short Falls Efficacy Scale-International (Short FES-I (15.9 ± 4.0 vs 13.8 ± 2.1 s, p  = 0.002)), the number of steps taken in the timed 4-m walk (T4MW (9.0 ± 1.8 vs 8.6 ± 1.8, p  = 0.04)), Short FES-I scores (9.4 ± 2.9 vs 8.6 ± 2.9, p  = 0.02) and weight (63.8 ± 12.4 vs 62.1 ± 11.6, p  = 0.004) were lower. No changes were seen in standing balance, blood pressure or T4MW time. Yoga was well accepted and resulted in improved ability to rise from a chair, weight loss, increased step length and reduced fear of falling. These results provide impetus for further research evaluating yoga as a fall prevention strategy in India.

Why nature prevails over nurture in the making of the elite athlete.

PubMed

Georgiades, Evelina; Klissouras, Vassilis; Baulch, Jamie; Wang, Guan; Pitsiladis, Yannis

2017-11-14

While the influence of nature (genes) and nurture (environment) on elite sporting performance remains difficult to precisely determine, the dismissal of either as a contributing factor to performance is unwarranted. It is accepted that a complex interaction of a combination of innumerable factors may mold a talented athlete into a champion. The prevailing view today is that understanding elite human performance will require the deciphering of two major sources of individual differences, genes and the environment. It is widely accepted that superior performers are endowed with a high genetic potential actualised through hard and prodigious effort. Heritability studies using the twin model have provided the basis to disentangle genetic and environmental factors that contribute to complex human traits and have paved the way to the detection of specific genes for elite sport performance. Yet, the heritability for most phenotypes essential to elite human performance is above 50% but below 100%, meaning that the environment is also important. Furthermore, individual differences can potentially also be explained not only by the impact of DNA sequence variation on biology and behaviour, but also by the effects of epigenetic changes which affect phenotype by modifying gene expression. Despite this complexity, the overwhelming and accumulating evidence, amounted through experimental research spanning almost two centuries, tips the balance in favour of nature in the "nature" and "nurture" debate. In other words, truly elite-level athletes are built - but only from those born with innate ability.

Interactive laboratory classes enhance neurophysiological knowledge in Thai medical students.

PubMed

Wongjarupong, Nicha; Niyomnaitham, Danai; Vilaisaktipakorn, Pitchamol; Suksiriworaboot, Tanawin; Qureshi, Shaun Peter; Bongsebandhu-Phubhakdi, Saknan

2018-03-01

Interactive laboratory class (ILC) is a two-way communication teaching method that encourages students to correlate laboratory findings with materials from lectures. In Thai medical education, active learning methods are uncommon. This paper aims to establish 1) if ILCs would effectively promote physiology learning; 2) if effectiveness would be found in both previously academically high-performing and low-performing students; and 3) the acceptability of ILCs to Thai medical students as a novel learning method. Two hundred seventy-eight second-year medical students were recruited to this study. We conducted three ILC sessions, which followed corresponding lectures. We carried out multiple-choice pre- and post-ILC assessments of knowledge and compared by repeated-measures ANOVA and unpaired t-test. Subgroup analysis was performed to compare high-performance (HighP) and low-performance (LowP) students. After the ILCs, participants self-rated their knowledge and satisfaction. Post-ILC test scores increased significantly compared with pre-ILC test scores in all three sessions. Mean scores of each post-ILC test increased significantly from pre-ILC test in both LowP and HighP groups. More students self-reported a "very high" and "high" level of knowledge after ILCs. Most students agreed that ILCs provided more discussion opportunity, motivated their learning, and made lessons more enjoyable. As an adjunct to lectures, ILCs can enhance knowledge in medical students, regardless of previous academic performance. Students perceived ILC as useful and acceptable. This study supports the active learning methods in physiology education, regardless of cultural context.

Factors influencing nurses' acceptance of hospital information systems in Iran: application of the Unified Theory of Acceptance and Use of Technology.

PubMed

Sharifian, Roxana; Askarian, Fatemeh; Nematolahi, Mohtaram; Farhadi, Payam

User acceptance is a precondition for successful implementation of hospital information systems (HISs). Increasing investment in information technology by healthcare organisations internationally has made user acceptance an important issue in technology implementation and management. Despite the increased focus on hospital information systems, there continues to be user resistance. The present study aimed to investigate the factors affecting hospital information systems nurse-user acceptance of HISs, based on the Unified Theory of Acceptance and Use of Technology (UTAUT), in the Shiraz University of Medical Sciences teaching hospitals. A descriptive-analytical research design was employed to study nurses' adoption and use of HISs. Data collection was undertaken using a cross-sectional survey of nurses (n=303). The research model was examined using the LISREL path confirmatory modeling. The results demonstrated that the nurses' behavioural intention (BI) to use hospital information systems was predicted by Performance Expectancy (PE) (β= 2.34, p<0.01), Effort Expectancy (EE) (β= 2.21, p<0.01), Social Influence (SI) (β= 2.63, p<0.01) and Facilitating Conditions (FC) (β= 2.84, p<0.01). The effects of these antecedents of BI explained 72.8% of the variance in nurses' intention to use hospital information systems (R2 = 0.728). Application of the research model suggested that nurses' acceptance of HISs was influenced by performance expectancy, effort expectancy, social influence and facilitating conditions, with performance expectancy having the strongest effect on user intention.

What does the multiple mini interview have to offer over the panel interview?

PubMed

Pau, Allan; Chen, Yu Sui; Lee, Verna Kar Mun; Sow, Chew Fei; De Alwis, Ranjit

2016-01-01

This paper compares the panel interview (PI) performance with the multiple mini interview (MMI) performance and indication of behavioural concerns of a sample of medical school applicants. The acceptability of the MMI was also assessed. All applicants shortlisted for a PI were invited to an MMI. Applicants attended a 30-min PI with two faculty interviewers followed by an MMI consisting of ten 8-min stations. Applicants were assessed on their performance at each MMI station by one faculty. The interviewer also indicated if they perceived the applicant to be a concern. Finally, applicants completed an acceptability questionnaire. From the analysis of 133 (75.1%) completed MMI scoresheets, the MMI scores correlated statistically significantly with the PI scores (r=0.438, p=0.001). Both were not statistically associated with sex, age, race, or pre-university academic ability to any significance. Applicants assessed as a concern at two or more stations performed statistically significantly less well at the MMI when compared with those who were assessed as a concern at one station or none at all. However, there was no association with PI performance. Acceptability scores were generally high, and comparison of mean scores for each of the acceptability questionnaire items did not show statistically significant differences between sex and race categories. Although PI and MMI performances are correlated, the MMI may have the added advantage of more objectively generating multiple impressions of the applicant's interpersonal skill, thoughtfulness, and general demeanour. Results of the present study indicated that the MMI is acceptable in a multicultural context.

What does the multiple mini interview have to offer over the panel interview?

PubMed Central

Pau, Allan; Chen, Yu Sui; Lee, Verna Kar Mun; Sow, Chew Fei; Alwis, Ranjit De

2016-01-01

Introduction This paper compares the panel interview (PI) performance with the multiple mini interview (MMI) performance and indication of behavioural concerns of a sample of medical school applicants. The acceptability of the MMI was also assessed. Materials and methods All applicants shortlisted for a PI were invited to an MMI. Applicants attended a 30-min PI with two faculty interviewers followed by an MMI consisting of ten 8-min stations. Applicants were assessed on their performance at each MMI station by one faculty. The interviewer also indicated if they perceived the applicant to be a concern. Finally, applicants completed an acceptability questionnaire. Results From the analysis of 133 (75.1%) completed MMI scoresheets, the MMI scores correlated statistically significantly with the PI scores (r=0.438, p=0.001). Both were not statistically associated with sex, age, race, or pre-university academic ability to any significance. Applicants assessed as a concern at two or more stations performed statistically significantly less well at the MMI when compared with those who were assessed as a concern at one station or none at all. However, there was no association with PI performance. Acceptability scores were generally high, and comparison of mean scores for each of the acceptability questionnaire items did not show statistically significant differences between sex and race categories. Conclusions Although PI and MMI performances are correlated, the MMI may have the added advantage of more objectively generating multiple impressions of the applicant's interpersonal skill, thoughtfulness, and general demeanour. Results of the present study indicated that the MMI is acceptable in a multicultural context. PMID:26873337

What does the multiple mini interview have to offer over the panel interview?

PubMed

Pau, Allan; Chen, Yu Sui; Lee, Verna Kar Mun; Sow, Chew Fei; Alwis, Ranjit De

2016-01-01

Introduction This paper compares the panel interview (PI) performance with the multiple mini interview (MMI) performance and indication of behavioural concerns of a sample of medical school applicants. The acceptability of the MMI was also assessed. Materials and methods All applicants shortlisted for a PI were invited to an MMI. Applicants attended a 30-min PI with two faculty interviewers followed by an MMI consisting of ten 8-min stations. Applicants were assessed on their performance at each MMI station by one faculty. The interviewer also indicated if they perceived the applicant to be a concern. Finally, applicants completed an acceptability questionnaire. Results From the analysis of 133 (75.1%) completed MMI scoresheets, the MMI scores correlated statistically significantly with the PI scores (r=0.438, p=0.001). Both were not statistically associated with sex, age, race, or pre-university academic ability to any significance. Applicants assessed as a concern at two or more stations performed statistically significantly less well at the MMI when compared with those who were assessed as a concern at one station or none at all. However, there was no association with PI performance. Acceptability scores were generally high, and comparison of mean scores for each of the acceptability questionnaire items did not show statistically significant differences between sex and race categories. Conclusions Although PI and MMI performances are correlated, the MMI may have the added advantage of more objectively generating multiple impressions of the applicant's interpersonal skill, thoughtfulness, and general demeanour. Results of the present study indicated that the MMI is acceptable in a multicultural context.

45 CFR 73.735-505 - Acceptance of awards and prizes.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Employees may accept awards, including cash awards, given in recognition of a meritorious public... employee in the performance of his or her offical duties, advice about the acceptance of it should be... trophies, entertainment, rewards, and prizes given to competitors in contests or events which are open to...

45 CFR 73.735-505 - Acceptance of awards and prizes.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Employees may accept awards, including cash awards, given in recognition of a meritorious public... employee in the performance of his or her offical duties, advice about the acceptance of it should be... trophies, entertainment, rewards, and prizes given to competitors in contests or events which are open to...

Understanding the Influence of Emotions and Reflection upon Multi-Source Feedback Acceptance and Use

ERIC Educational Resources Information Center

Sargeant, Joan; Mann, Karen; Sinclair, Douglas; Van der Vleuten, Cees; Metsemakers, Job

2008-01-01

Introduction: Receiving negative performance feedback can elicit negative emotional reactions which can interfere with feedback acceptance and use. This study investigated emotional responses of family physicians' participating in a multi-source feedback (MSF) program, sources of these emotions, and their influence upon feedback acceptance and…

Maximizing HIV partner notification opportunities for index patients and their sexual partners in Malawi.

PubMed

Kamanga, G; Brown, L; Jawati, P; Chiwanda, D; Nyirenda, N

2015-12-01

HIV testing and counselling (HTC) is important to effect positive sexual behaviour change and is an entry point to treatment, care, and psychosocial support. One of the most practical initiatives to increase HTC is to encourage sexual partners of HIV-infected persons to test for HIV. However, partner notification strategies must be feasible in the healthcare setting and acceptable to the population. We conducted a qualitative study during the pilot phase of an HIV partner notification trial to complement its assessment of feasibility and acceptability of methods of partner notification. We performed in-depth interviews with 16 consecutive HIV-positive index participants who consented and their 12 identifiable sexual partners. We also conducted two focus group discussions with healthcare workers to supplement the patient perspectives. In the main study, newly diagnosed HIV cases (index cases) were randomized to one of three methods of partner notification: passive, contract, and provider referral. Clients in the passive referral group were responsible for notifying their sexual partners themselves. Individuals in the contract referral group were given seven days to notify their partners, after which a healthcare provider contacted partners who had not reported for counselling and testing. In the provider group, a healthcare provider notified partners directly. Although most index participants and partners expressed a preference for passive notification, they also highlighted benefits for provider-assisted notification and the universal right for all HIV-exposed persons to know their HIV exposure and benefit from HIV testing and access antiretroviral treatment. Several participants mentioned couples counselling as a way to diffuse tension and get accurate information. All mentioned benefits to HIV testing, including the opportunity to change behaviour. Provider-assisted partner notification is not preferred, but it is acceptable and may complement the passive method of notification. Couples counselling should also be encouraged.

Improving International-Level Chess Players' Performance with an Acceptance-Based Protocol: Preliminary Findings

ERIC Educational Resources Information Center

Ruiz, Francisco J.; Luciano, Carmen

2012-01-01

This study compared an individual, 4-hr intervention based on acceptance and commitment therapy (ACT) versus a no-contact control condition in improving the performance of international-level chess players. Five participants received the brief ACT protocol, with each matched to another chess player with similar characteristics in the control…

User acceptance of E-Government Services Based on TRAM model

NASA Astrophysics Data System (ADS)

Adiyarta, K.; Napitupulu, D.; Nurdianto, H.; Rahim, R.; Ahmar, A.

2018-05-01

Developing country mostly left behind in adopting e-Government system. Miss-interpretation is assuming e-Government only about the application of technology made fail implementation. It is a whole philosophy that explores a human-citizen centered aspect in organized societies. Further, successful information system determined by user acceptance. Therefore, the evaluation of the performance of e-Government is one of the basic objectives of current government reformation. The research focus is to identify and explore the extent of user acceptance toward e-Government system. The research methodology used in this research is survey based on a questionnaire with TRAM approach and distributed to 230 respondents as customers that had been using e-Government services provided by X institution. The result of the study showed that the personality traits of TR significantly influenced cognitive dimensions of TAM. Through empirical demonstrations indicated that the TRI was said to be antecedents to TAM. The optimism dimension had higher coefficient among others, exhibit the technology users convince that the new technology will improve their productivity, while discomfort had no impact since the users have no doubt or hesitate to use technology.

Mid-trimester induced abortion: a review.

PubMed

Lalitkumar, S; Bygdeman, M; Gemzell-Danielsson, K

2007-01-01

Mid-trimester abortion constitutes 10-15% of all induced abortion. The aim of this article is to provide a review of the current literature of mid-trimester methods of abortion with respect to efficacy, side effects and acceptability. There have been continuing efforts to improve the abortion technology in terms of effectiveness, technical ease of performance, acceptability and reduction of side effects and complications. During the last decade, medical methods for mid-trimester induced abortion have shown a considerable development and have become safe and more accessible. The combination of mifepristone and misoprostol is now an established and highly effective method for termination of pregnancy (TOP). Advantages and disadvantages of medical versus surgical methods are discussed. Randomized studies are lacking, and more studies on pain treatment and the safety of any method used in patients with a previous uterine scar are debated, and data are scarce. Pain management in abortion requires special attention. This review highlights the need for randomized studies to set guidelines for mid-trimester abortion methods in terms of safety and acceptability as well as for better analgesic regimens.

Factors affecting vasectomy acceptability in Tanzania.

PubMed

Bunce, Arwen; Guest, Greg; Searing, Hannah; Frajzyngier, Veronica; Riwa, Peter; Kanama, Joseph; Achwal, Isaac

2007-03-01

Calls for increased inclusion of men in matters of reproductive health emphasize the need for research into vasectomy acceptability and decision making. Vasectomy is a safe, simple and effective method of contraception, but is underused worldwide. Focus group discussions and in-depth interviews were conducted with potential and actual sterilization clients and their partners in the Kigoma Region of Tanzania. Content analysis was used to search for emergent themes related to vasectomy decision making. Six themes emerged as overarching factors contributing to the vasectomy decision-making process: economics, spousal influence, religion, provider reputation and availability, uncertainty about the future, and poor vasectomy knowledge and understanding. There was substantial communication between partners regarding the vasectomy decision, and wives had a strong influence on the outcome; however, men and women agreed that husbands would resist vasectomy if wives initially raised the topic. Vasectomy acceptance is limited by the scarcity of skilled vasectomy providers and by the fact that men and women hold many of the same misunderstandings about vasectomy, including a fear of decreased sexual performance as a result of the procedure. Spousal discussions are important in the decision to get a vasectomy, but these discussions should be initiated by the male partner. Programs need to educate men about contraceptive options, including vasectomies. Detailed, culturally relevant knowledge of the barriers and facilitators individuals experience during their decision- making process will enable vasectomy promotion programs to more successfully target appropriate populations.

Biofeedback in Partial Weight Bearing: Usability of Two Different Devices from a Patient's and Physical Therapist's Perspective.

PubMed

van Lieshout, Remko; Pisters, Martijn F; Vanwanseele, Benedicte; de Bie, Rob A; Wouters, Eveline J; Stukstette, Mirelle J

2016-01-01

Partial weight bearing is frequently instructed by physical therapists in patients after lower-limb trauma or surgery. The use of biofeedback devices seems promising to improve the patient's compliance with weight-bearing instructions. SmartStep and OpenGo-Science are biofeedback devices that provide real-time feedback. For a successful implementation, usability of the devices is a critical aspect and should be tested from a user's perspective. To describe the usability from the physical therapists' and a patients' perspective of Smartstep and OpenGo-Science to provide feedback on partial weight bearing during supervised rehabilitation of patients after lower-limb trauma or surgery. In a convergent mixed-methods design, qualitative and quantitative data were collected. Usability was subdivided into user performance, satisfaction and acceptability. Patients prescribed with partial weight bearing and their physical therapists were asked to use SmartStep and OpenGo-Science during supervised rehabilitation. Usability was qualitatively tested by a think-aloud method and a semi-structured interview and quantitatively tested by the System-Usability-Scale (SUS) and closed questions. For the qualitative data thematic content analyses were used. Nine pairs of physical therapists and their patients participated. The mean SUS scores for patients and physical therapists were for SmartStep 70 and 53, and for OpenGo-Science 79 and 81, respectively. Scores were interpreted with the Curved Grading Scale. The qualitative data showed that there were mixed views and perceptions from patients and physical therapists on satisfaction and acceptability. This study gives insight in the usability of two biofeedback devices from the patient's and physical therapist's perspective. The overall usability from both perspectives seemed to be acceptable for OpenGo-Science. For SmartStep, overall usability seemed only acceptable from the patient's perspective. The study findings could help clinicians to decide which biofeedback device is appropriate for their given situation and provide information for future development of biofeedback devices.

Validation and testing of the Acceptability E-scale for Web-based patient-reported outcomes in cancer care

PubMed Central

Tariman, Joseph D.; Berry, Donna L.; Halpenny, Barbara; Wolpin, Seth; Schepp, Karen

2010-01-01

The performance of the Acceptability E-scale was tested in a sample of 627 adult and older adult patients from various oncology clinics who completed an electronic symptoms survey. The revised Acceptability E-scale has strong psychometric properties and can be useful in assessing the acceptability and usability of computerized health-related programs in oncology and other health population. PMID:20974066

A new dynamic tactile display for reconfigurable braille: implementation and tests.

PubMed

Motto Ros, Paolo; Dante, Vittorio; Mesin, Luca; Petetti, Erminio; Del Giudice, Paolo; Pasero, Eros

2014-01-01

Different tactile interfaces have been proposed to represent either text (braille) or, in a few cases, tactile large-area screens as replacements for visual displays. None of the implementations so far can be customized to match users' preferences, perceptual differences and skills. Optimal choices in these respects are still debated; we approach a solution by designing a flexible device allowing the user to choose key parameters of tactile transduction. We present here a new dynamic tactile display, a 8 × 8 matrix of plastic pins based on well-established and reliable piezoelectric technology to offer high resolution (pin gap 0.7mm) as well as tunable strength of the pins displacement, and refresh rate up to 50s(-1). It can reproduce arbitrary patterns, allowing it to serve the dual purpose of providing, depending on contingent user needs, tactile rendering of non-character information, and reconfigurable braille rendering. Given the relevance of the latter functionality for the expected average user, we considered testing braille encoding by volunteers a benchmark of primary importance. Tests were performed to assess the acceptance and usability with minimal training, and to check whether the offered flexibility was indeed perceived by the subject as an added value compared to conventional braille devices. Different mappings between braille dots and actual tactile pins were implemented to match user needs. Performances of eight experienced braille readers were defined as the fraction of correct identifications of rendered content. Different information contents were tested (median performance on random strings, words, sentences identification was about 75%, 85%, 98%, respectively, with a significant increase, p < 0.01), obtaining statistically significant improvements in performance during the tests (p < 0.05). Experimental results, together with qualitative ratings provided by the subjects, show a good acceptance and the effectiveness of the proposed solution.

A new dynamic tactile display for reconfigurable braille: implementation and tests

PubMed Central

Motto Ros, Paolo; Dante, Vittorio; Mesin, Luca; Petetti, Erminio; Del Giudice, Paolo; Pasero, Eros

2014-01-01

Different tactile interfaces have been proposed to represent either text (braille) or, in a few cases, tactile large-area screens as replacements for visual displays. None of the implementations so far can be customized to match users' preferences, perceptual differences and skills. Optimal choices in these respects are still debated; we approach a solution by designing a flexible device allowing the user to choose key parameters of tactile transduction. We present here a new dynamic tactile display, a 8 × 8 matrix of plastic pins based on well-established and reliable piezoelectric technology to offer high resolution (pin gap 0.7mm) as well as tunable strength of the pins displacement, and refresh rate up to 50s−1. It can reproduce arbitrary patterns, allowing it to serve the dual purpose of providing, depending on contingent user needs, tactile rendering of non-character information, and reconfigurable braille rendering. Given the relevance of the latter functionality for the expected average user, we considered testing braille encoding by volunteers a benchmark of primary importance. Tests were performed to assess the acceptance and usability with minimal training, and to check whether the offered flexibility was indeed perceived by the subject as an added value compared to conventional braille devices. Different mappings between braille dots and actual tactile pins were implemented to match user needs. Performances of eight experienced braille readers were defined as the fraction of correct identifications of rendered content. Different information contents were tested (median performance on random strings, words, sentences identification was about 75%, 85%, 98%, respectively, with a significant increase, p < 0.01), obtaining statistically significant improvements in performance during the tests (p < 0.05). Experimental results, together with qualitative ratings provided by the subjects, show a good acceptance and the effectiveness of the proposed solution. PMID:24782756

Barriers to using eHealth data for clinical performance feedback in Malawi: A case study.

PubMed

Landis-Lewis, Zach; Manjomo, Ronald; Gadabu, Oliver J; Kam, Matthew; Simwaka, Bertha N; Zickmund, Susan L; Chimbwandira, Frank; Douglas, Gerald P; Jacobson, Rebecca S

2015-10-01

Sub-optimal performance of healthcare providers in low-income countries is a critical and persistent global problem. The use of electronic health information technology (eHealth) in these settings is creating large-scale opportunities to automate performance measurement and provision of feedback to individual healthcare providers, to support clinical learning and behavior change. An electronic medical record system (EMR) deployed in 66 antiretroviral therapy clinics in Malawi collects data that supervisors use to provide quarterly, clinic-level performance feedback. Understanding barriers to provision of eHealth-based performance feedback for individual healthcare providers in this setting could present a relatively low-cost opportunity to significantly improve the quality of care. The aims of this study were to identify and describe barriers to using EMR data for individualized audit and feedback for healthcare providers in Malawi and to consider how to design technology to overcome these barriers. We conducted a qualitative study using interviews, observations, and informant feedback in eight public hospitals in Malawi where an EMR system is used. We interviewed 32 healthcare providers and conducted seven hours of observation of system use. We identified four key barriers to the use of EMR data for clinical performance feedback: provider rotations, disruptions to care processes, user acceptance of eHealth, and performance indicator lifespan. Each of these factors varied across sites and affected the quality of EMR data that could be used for the purpose of generating performance feedback for individual healthcare providers. Using routinely collected eHealth data to generate individualized performance feedback shows potential at large-scale for improving clinical performance in low-resource settings. However, technology used for this purpose must accommodate ongoing changes in barriers to eHealth data use. Understanding the clinical setting as a complex adaptive system (CAS) may enable designers of technology to effectively model change processes to mitigate these barriers. Copyright © 2015. Published by Elsevier Ireland Ltd.

Barriers to using eHealth data for clinical performance feedback in Malawi: A case study

PubMed Central

Landis-Lewis, Zach; Manjomo, Ronald; Gadabu, Oliver J; Kam, Matthew; Simwaka, Bertha N; Zickmund, Susan L; Chimbwandira, Frank; Douglas, Gerald P; Jacobson, Rebecca S

2016-01-01

Introduction Sub-optimal performance of healthcare providers in low-income countries is a critical and persistent global problem. The use of electronic health information technology (eHealth) in these settings is creating large-scale opportunities to automate performance measurement and provision of feedback to individual healthcare providers, to support clinical learning and behavior change. An electronic medical record system (EMR) deployed in 66 antiretroviral therapy clinics in Malawi collects data that supervisors use to provide quarterly, clinic-level performance feedback. Understanding barriers to provision of eHealth-based performance feedback for individual healthcare providers in this setting could present a relatively low-cost opportunity to significantly improve the quality of care. Objective The aims of this study were to identify and describe barriers to using EMR data for individualized audit and feedback for healthcare providers in Malawi and to consider how to design technology to overcome these barriers. Methods We conducted a qualitative study using interviews, observations, and informant feedback in eight public hospitals in Malawi where an EMR is used. We interviewed 32 healthcare providers and conducted seven hours of observation of system use. Results We identified four key barriers to the use of EMR data for clinical performance feedback: provider rotations, disruptions to care processes, user acceptance of eHealth, and performance indicator lifespan. Each of these factors varied across sites and affected the quality of EMR data that could be used for the purpose of generating performance feedback for individual healthcare providers. Conclusion Using routinely collected eHealth data to generate individualized performance feedback shows potential at large-scale for improving clinical performance in low-resource settings. However, technology used for this purpose must accommodate ongoing changes in barriers to eHealth data use. Understanding the clinical setting as a complex adaptive system (CAS) may enable designers of technology to effectively model change processes to mitigate these barriers. PMID:26238704

Exploring the acceptability of human papillomavirus self-sampling among Muslim immigrant women.

PubMed

Lofters, Aisha K; Vahabi, Mandana; Fardad, Mitra; Raza, Afrah

2017-01-01

With appropriate screening (ie, the Papanicolaou [Pap] test), cervical cancer is highly preventable, and high-income countries, including Canada, have observed significant decreases in cervical cancer mortality. However, certain subgroups, including immigrants from countries with large Muslim populations, experience disparities in cervical cancer screening. Little is known about the acceptability of human papillomavirus (HPV) self-sampling as a screening strategy among Muslim immigrant women in Canada. This study assessed cervical cancer screening practices, knowledge and attitudes, and acceptability of HPV self-sampling among Muslim immigrant women. A convenience sample of 30 women was recruited over a 3-month period (June-August 2015) in the Greater Toronto Area. All women were between 21 and 69 years old, foreign-born, and self-identified as Muslim, and had good knowledge of English. Data were collected through a self-completed questionnaire. More than half of the participants falsely indicated that Pap tests may cause cervical infection, and 46.7% indicated that the test is an intrusion on privacy. The majority of women reported that they would be willing to try HPV self-sampling, and more than half would prefer this method to provider-administered sampling methods. Barriers to self-sampling included confidence in the ability to perform the test and perceived cost, and facilitators included convenience and privacy being preserved. The results demonstrate that HPV self-sampling may provide a favorable alternative model of care to the traditional provider-administered Pap testing. These findings add important information to the literature related to promoting cancer screening among women who are under or never screened for cervical cancer.

A design study for a compact two stage in-flight separator with a high mass resolution and large acceptance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hwang, Ji-Gwang; Kim, Eun-San, E-mail: eskim1@knu.ac.kr; Hatanaka, Kichiji

2015-03-15

The rare isotope beam separator with a large angular acceptance and energy acceptance is essential for examining the characteristics of unstable nuclei and exotic nuclear reactions. Careful design, however, is required to compensate for the effects of high order aberrations induced by large aperture magnets, which are used to collect rare isotopes obtained from a high energy primary heavy-ion beam hitting a target. In order to minimize the effect of the high order aberration, the optics was based on the mirror symmetry optics, which provides smaller high order aberrations, for the separation of {sup 132}Sn produced by a fission reactionmore » between the primary beam of {sup 238}U and a relatively thick Pb target. The designed optics provides energy acceptance (full), horizontal angular acceptance, and vertical acceptance of approximately 8%, 60 mrad, and 130 mrad, respectively.« less

A design study for a compact two stage in-flight separator with a high mass resolution and large acceptance.

PubMed

Hwang, Ji-Gwang; Kim, Eun-San; Hatanaka, Kichiji

2015-03-01

The rare isotope beam separator with a large angular acceptance and energy acceptance is essential for examining the characteristics of unstable nuclei and exotic nuclear reactions. Careful design, however, is required to compensate for the effects of high order aberrations induced by large aperture magnets, which are used to collect rare isotopes obtained from a high energy primary heavy-ion beam hitting a target. In order to minimize the effect of the high order aberration, the optics was based on the mirror symmetry optics, which provides smaller high order aberrations, for the separation of (132)Sn produced by a fission reaction between the primary beam of (238)U and a relatively thick Pb target. The designed optics provides energy acceptance (full), horizontal angular acceptance, and vertical acceptance of approximately 8%, 60 mrad, and 130 mrad, respectively.

A design study for a compact two stage in-flight separator with a high mass resolution and large acceptance

NASA Astrophysics Data System (ADS)

Hwang, Ji-Gwang; Kim, Eun-San; Hatanaka, Kichiji

2015-03-01

The rare isotope beam separator with a large angular acceptance and energy acceptance is essential for examining the characteristics of unstable nuclei and exotic nuclear reactions. Careful design, however, is required to compensate for the effects of high order aberrations induced by large aperture magnets, which are used to collect rare isotopes obtained from a high energy primary heavy-ion beam hitting a target. In order to minimize the effect of the high order aberration, the optics was based on the mirror symmetry optics, which provides smaller high order aberrations, for the separation of 132Sn produced by a fission reaction between the primary beam of 238U and a relatively thick Pb target. The designed optics provides energy acceptance (full), horizontal angular acceptance, and vertical acceptance of approximately 8%, 60 mrad, and 130 mrad, respectively.

Supplemental Immobilization of Hanford Low-Activity Waste: Cast Stone Screening Tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Westsik, Joseph H.; Piepel, Gregory F.; Lindberg, Michael J.

2013-09-30

More than 56 million gallons of radioactive and hazardous waste are stored in 177 underground storage tanks at the U.S. Department of Energy’s (DOE’s) Hanford Site in southeastern Washington State. The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is being constructed to treat the wastes and immobilize them in a glass waste form. The WTP includes a pretreatment facility to separate the wastes into a small volume of high-level waste (HLW) containing most of the radioactivity and a larger volume of low-activity waste (LAW) containing most of the nonradioactive chemicals. The HLW will be converted to glass in themore » HLW vitrification facility for ultimate disposal at an offsite federal repository. At least a portion (~35%) of the LAW will be converted to glass in the LAW vitrification facility and will be disposed of onsite at the Integrated Disposal Facility (IDF). The pretreatment and HLW vitrification facilities will have the capacity to treat and immobilize the wastes destined for each facility. However, a second LAW immobilization facility will be needed for the expected volume of LAW requiring immobilization. A cementitious waste form known as Cast Stone is being considered to provide the required additional LAW immobilization capacity. The Cast Stone waste form must be acceptable for disposal in the IDF. The Cast Stone waste form and immobilization process must be tested to demonstrate that the final Cast Stone waste form can comply with the waste acceptance criteria for the disposal facility and that the immobilization processes can be controlled to consistently provide an acceptable waste form product. Further, the waste form must be tested to provide the technical basis for understanding the long-term performance of the waste form in the disposal environment. These waste form performance data are needed to support risk assessment and performance assessment (PA) analyses of the long-term environmental impact of the waste disposal in the IDF. The PA is needed to satisfy both Washington State IDF Permit and DOE Order requirements. Cast Stone has been selected for solidification of radioactive wastes including WTP aqueous secondary wastes treated at the Effluent Treatment Facility (ETF) at Hanford. A similar waste form called Saltstone is used at the Savannah River Site (SRS) to solidify its LAW tank wastes.« less

Acceptability of picture archiving and communication system (PACS) among hospital healthcare personnel based on a unified theory of acceptance and use of technology.

PubMed

Ahmadi, Maryam; Mehrabi, Nahid; Sheikhtaheri, Abbas; Sadeghi, Mojtaba

2017-09-01

The picture archiving and communication system (PACS) is a healthcare system technology which manages medical images and integrates equipment through a network. There are some theories about the use and acceptance of technology by people to describe the behavior and attitudes of end users towards information technologies. We investigated the influential factors on users' acceptance of PACS in the military hospitals of Tehran. In this applied analytical and cross-sectional study, 151 healthcare employees of military hospitals who had experience in using the PACS system were investigated. Participants were selected by census. The following variables were considered: performance expectancy, efforts expectancy, social influence, facilitating conditions and behavioral intention. Data were gathered using a questionnaire. Its validity and reliability were approved by a panel of experts and was piloted with 30 hospital healthcare staff (Cronbach's alpha =0.91). Spearman correlation coefficient and multiple linear regression analysis were used in analyzing the data. Expected performance, efforts expectancy, social impact and facilitating conditions had a significant relationship with behavioral intention. The multiple regression analysis indicated that only performance expectancy can predict the user's behavioral intentions to use PACS technology. Performance and effort expectancies are quite influential in accepting the use of PACS in hospitals. All healthcare personnel should become aware that using such technology is necessary in a hospital. Knowing the influencing factors that affect the acceptance of using new technology can help in improving its use, especially in a healthcare system. This can improve the offered healthcare services' quality.

Employment-based reinforcement of adherence to an FDA approved extended release formulation of naltrexone in opioid-dependent adults: a randomized controlled trial.

PubMed

DeFulio, Anthony; Everly, Jeffrey J; Leoutsakos, Jeannie-Marie S; Umbricht, Annie; Fingerhood, Michael; Bigelow, George E; Silverman, Kenneth

2012-01-01

Naltrexone provides excellent opioid blockade, but its clinical utility is limited because opioid-dependent patients typically refuse it. An injectable suspension of naltrexone for extended release (XR-NTX) was recently approved by the FDA for treatment of opioid dependence. XR-NTX treatment may require concurrent behavioral intervention to maximize adherence and effectiveness, thus we sought to evaluate employment-based reinforcement as a method of improving adherence to XR-NTX in opiate dependent adults. Opioid-dependent adults (n=38) were detoxified and inducted onto oral naltrexone, then randomly assigned to contingency or prescription conditions. Participants received up to six doses of XR-NTX at four-week intervals. All participants could earn vouchers for attendance and performance at a therapeutic workplace. Contingency participants were required to accept XR-NTX injections to access the workplace and earn vouchers. Prescription participants could earn vouchers independent of their acceptance of XR-NTX injections. Contingency participants accepted significantly more naltrexone injections than prescription participants (87% versus 52%, p=.002), and were more likely to accept all injections (74% versus 26%, p=.004). Participants in the two conditions provided similar percentages of samples negative for opiates (72% versus 65%) and for cocaine (58% versus 54%). Opiate positivity was significantly more likely when samples were also cocaine positive, independent of naltrexone blockade (p=.002). Long-term adherence to XR-NTX in unemployed opiate dependent adults is low under usual care conditions. Employment-based reinforcement can maintain adherence to XR-NTX. Ongoing cocaine use appears to interfere with the clinical effectiveness of XR-NTX on opiate use. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

The manufacturing, assembly and acceptance testing of the breadboard cryogenic Optical Delay Line for DARWIN

NASA Astrophysics Data System (ADS)

van den Dool, T. C.; Kamphues, F.; Gielesen, W.; Dorrepaal, M.; Doelman, N.; Loix, N.; Verschueren, J. P.; Kooijman, P. P.; Visser, M.; Velsink, G.; Fleury, K.

2005-08-01

TNO, in cooperation with Micromega-Dynamics, SRON, Dutch Space and CSL, has developed a compact breadboard cryogenic Optical Delay Line for use in future space interferometry missions. The work is performed under ESA contract in preparation for the DARWIN mission. The breadboard delay line is representative of a future flight mechanism, with all used materials and processes being flight representative. The delay line has a single stage voice coil actuator for Optical Path Difference (OPD) control, driving a two-mirror cat's eye. Magnetic bearings are used for guiding. They provide frictionless and wear free operation with zero-hysteresis. The manufacturing, assembly and acceptance testing have been completed and are reported in this paper. The verification program, including functional testing at 40 K, will start in the final quarter of 2005.

The Injury/Illness Performance Project (IIPP): A Novel Epidemiological Approach for Recording the Consequences of Sports Injuries and Illnesses

PubMed Central

Fuller, Colin; Jaques, Rod; Hunter, Glenn

2013-01-01

Background. Describing the frequency, severity, and causes of sports injuries and illnesses reliably is important for quantifying the risk to athletes and providing direction for prevention initiatives. Methods. Time-loss and/or medical-attention definitions have long been used in sports injury/illness epidemiology research, but the limitations to these definitions mean that some events are incorrectly classified or omitted completely, where athletes continue to train and compete at high levels but experience restrictions in their performance. Introducing a graded definition of performance-restriction may provide a solution to this issue. Results. Results from the Great Britain injury/illness performance project (IIPP) are presented using a performance-restriction adaptation of the accepted surveillance consensus methodologies. The IIPP involved 322 Olympic athletes (males: 172; female: 150) from 10 Great Britain Olympic sports between September 2009 and August 2012. Of all injuries (n = 565), 216 were classified as causing time-loss, 346 as causing performance-restriction, and 3 were unclassified. For athlete illnesses (n = 378), the majority (P < 0.01) resulted in time-loss (270) compared with performance-restriction (101) (7 unclassified). Conclusions. Successful implementation of prevention strategies relies on the correct characterisation of injury/illness risk factors. Including a performance-restriction classification could provide a deeper understanding of injuries/illnesses and better informed prevention initiatives. PMID:26464883

Investigating Students' Acceptance of a Statistics Learning Platform Using Technology Acceptance Model

ERIC Educational Resources Information Center

Song, Yanjie; Kong, Siu-Cheung

2017-01-01

The study aims at investigating university students' acceptance of a statistics learning platform to support the learning of statistics in a blended learning context. Three kinds of digital resources, which are simulations, online videos, and online quizzes, were provided on the platform. Premised on the technology acceptance model, we adopted a…

The Acceptability of Food and Food Service at Fitzsimons Army Medical Center Under Military and Contract Operation

DTIC Science & Technology

1985-09-01

service quality in the civilian sector. It was determined that acceptability by the patients eating in their rooms and by patients and personnel...performance significantly higher than the military food operation. CONCLUSION The results of the acceptability surveys of food and food service quality under

49 CFR 232.505 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2013 CFR

2013-10-01

... acceptance tests; (3) Correct any safety deficiencies identified by FRA in the design of the equipment or in... principal test objectives shall be to demonstrate that the equipment meets the safety design and performance... 49 Transportation 4 2013-10-01 2013-10-01 false Pre-revenue service acceptance testing plan. 232...

49 CFR 232.505 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2012 CFR

2012-10-01

... acceptance tests; (3) Correct any safety deficiencies identified by FRA in the design of the equipment or in... principal test objectives shall be to demonstrate that the equipment meets the safety design and performance... 49 Transportation 4 2012-10-01 2012-10-01 false Pre-revenue service acceptance testing plan. 232...

49 CFR 232.505 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2014 CFR

2014-10-01

... acceptance tests; (3) Correct any safety deficiencies identified by FRA in the design of the equipment or in... principal test objectives shall be to demonstrate that the equipment meets the safety design and performance... 49 Transportation 4 2014-10-01 2014-10-01 false Pre-revenue service acceptance testing plan. 232...

49 CFR 232.505 - Pre-revenue service acceptance testing plan.

Code of Federal Regulations, 2011 CFR

2011-10-01

... acceptance tests; (3) Correct any safety deficiencies identified by FRA in the design of the equipment or in... principal test objectives shall be to demonstrate that the equipment meets the safety design and performance... 49 Transportation 4 2011-10-01 2011-10-01 false Pre-revenue service acceptance testing plan. 232...

Multidisciplinary management of patent foramen ovale (PFO) and cryptogenic stroke/TIA

PubMed Central

Mirzada, Naqibullah; Ladenvall, Per; Hansson, Per-Olof; Eriksson, Peter; Dellborg, Mikael

2013-01-01

Purpose Patent foramen ovale (PFO) has been implicated as a risk factor for cryptogenic ischemic stroke (CS). However, there is still a lack of widely accepted, undisputed indications for PFO closure. The present study describes the concept of the multidisciplinary PFO conference and a decision making process for closure versus no closure that was developed into a formalized clinical algorithm, and presents the results of implementing these, in terms of number and proportion of PFO closures as well as repeat referrals. Design Five specialists in neurology, cardiology, internal medicine, thromboembolism, and echocardiography evaluated the clinical data of 311 patients at PFO conferences during 2006 to 2009. The main criteria for closure were patients with first-ever CS with PFO and atrial septal aneurysm, or patients with recurrent CS and PFO without atrial septal aneurysm. Results A total of 143 patients (46%) were accepted for closure and 167 patients were rejected. Patients accepted for closure were younger (mean 50 years versus 58 years) (P < 0.001). The acceptance rate for PFO closure was similar throughout these years, with an average of 45%. Three of 167 patients (1.8%) initially rejected for PFO closure were re-referred due to recurrent stroke, and the PFO closure was subsequently performed. Conclusion The acceptance rate of less than 50% in the present study underscores the complex relationship between CS and PFO. Whatever the criteria used for PFO closure, any unit caring for these patients needs to have a rigorous process to avoid overtreatment as well as undertreatment and to ensure that personal preferences and economic incentives do not steer the selection process. Our algorithm provides a stable acceptance rate and a low rate of repeat referrals. PMID:24082787

Public acceptance for centralized storage and repositories of low-level waste session (Panel)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lutz, H.R.

1995-12-31

Participants from various parts of the world will provide a summary of their particular country`s approach to low-level waste management and the cost of public acceptance for low-level waste management facilities. Participants will discuss the number, geographic location, and type of low-level waste repositories and centralized storage facilities located in their countries. Each will discuss the amount, distribution, and duration of funds to gain public acceptance of these facilities. Participants will provide an estimated $/meter for centralized storage facilities and repositories. The panel will include a brief discussion about the ethical aspects of public acceptance costs, approaches for negotiating acceptance,more » and lessons learned in each country. The audience is invited to participate in the discussion.« less

Analytical performance evaluation of a high-volume hematology laboratory utilizing sigma metrics as standard of excellence.

PubMed

Shaikh, M S; Moiz, B

2016-04-01

Around two-thirds of important clinical decisions about the management of patients are based on laboratory test results. Clinical laboratories are required to adopt quality control (QC) measures to ensure provision of accurate and precise results. Six sigma is a statistical tool, which provides opportunity to assess performance at the highest level of excellence. The purpose of this study was to assess performance of our hematological parameters on sigma scale in order to identify gaps and hence areas of improvement in patient care. Twelve analytes included in the study were hemoglobin (Hb), hematocrit (Hct), red blood cell count (RBC), mean corpuscular volume (MCV), red cell distribution width (RDW), total leukocyte count (TLC) with percentages of neutrophils (Neutr%) and lymphocytes (Lymph %), platelet count (Plt), mean platelet volume (MPV), prothrombin time (PT), and fibrinogen (Fbg). Internal quality control data and external quality assurance survey results were utilized for the calculation of sigma metrics for each analyte. Acceptable sigma value of ≥3 was obtained for the majority of the analytes included in the analysis. MCV, Plt, and Fbg achieved value of <3 for level 1 (low abnormal) control. PT performed poorly on both level 1 and 2 controls with sigma value of <3. Despite acceptable conventional QC tools, application of sigma metrics can identify analytical deficits and hence prospects for the improvement in clinical laboratories. © 2016 John Wiley & Sons Ltd.

A Privacy-Preserving Platform for User-Centric Quantitative Benchmarking

NASA Astrophysics Data System (ADS)

Herrmann, Dominik; Scheuer, Florian; Feustel, Philipp; Nowey, Thomas; Federrath, Hannes

We propose a centralised platform for quantitative benchmarking of key performance indicators (KPI) among mutually distrustful organisations. Our platform offers users the opportunity to request an ad-hoc benchmarking for a specific KPI within a peer group of their choice. Architecture and protocol are designed to provide anonymity to its users and to hide the sensitive KPI values from other clients and the central server. To this end, we integrate user-centric peer group formation, exchangeable secure multi-party computation protocols, short-lived ephemeral key pairs as pseudonyms, and attribute certificates. We show by empirical evaluation of a prototype that the performance is acceptable for reasonably sized peer groups.

Improving the interview skills of college students using behavioral skills training.

PubMed

Stocco, Corey S; Thompson, Rachel H; Hart, John M; Soriano, Heidi L

2017-07-01

Obtaining a job as a college graduate is partly dependent on interview performance. We used a multiple baseline design across skills to evaluate the effects of behavioral skills training with self-evaluation for five college students. Training effects were evaluated using simulated interviews as baseline and posttraining assessments. All participants acquired targeted skills, but we observed some individual differences. Participants were satisfied with training outcomes and rated the procedures as acceptable. Furthermore, ratings from university staff who provide interview training indicated that training improved performance across several skills for the majority of participants. © 2017 Society for the Experimental Analysis of Behavior.

Solid-State Thermionic Power Generators: An Analytical Analysis in the Nonlinear Regime

NASA Astrophysics Data System (ADS)

Zebarjadi, M.

2017-07-01

Solid-state thermionic power generators are an alternative to thermoelectric modules. In this paper, we develop an analytical model to investigate the performance of these generators in the nonlinear regime. We identify dimensionless parameters determining their performance and provide measures to estimate an acceptable range of thermal and electrical resistances of thermionic generators. We find the relation between the optimum load resistance and the internal resistance and suggest guidelines for the design of thermionic power generators. Finally, we show that in the nonlinear regime, thermionic power generators can have efficiency values higher than the state-of-the-art thermoelectric modules.

Development of a measure of student self-evaluation of physics exam performance

NASA Astrophysics Data System (ADS)

Hagedorn, Eric Anthony

The central purpose of this study was to provide preliminary evidence of the reliability and validity of the SEVSI - P (Self- evaluation scaled instrument - physics). This instrument, designed to measure student self-evaluation of physics exam performance, was developed in congruence with social cognitive theory. Self-evaluation in this study is defined to consist of two of the three subprocesses of self-regulation: self-observation and judgmental process. As such, the SEVSI - P consists of two subscales, one measuring the frequency and types of self-observations made during a physics exam and one measuring the frequency and types of judgmental comparisons made after an exam. Data from 621 completed surveys, voluntarily taken by first semester algebra/trigonometry based physics students at six Midwestern universities and one Southern university, were analyzed for reliability and factorial validity. Cronbach alphas of .71 and .83 for the self-observation and judgment subscales, respectively, indicate acceptable reliability for the instrument. Confirmatory factor analysis indicates the acceptability of the hypothesis that the data analyzed could have indeed been obtained from the proposed two factor model (self-observation and judgment). The results of this confirmatory factor analysis provide preliminary construct validity for this instrument. A number of theoretically related items were included on the SEVSI - P form to elicity information about the use of goals and pre-planned strategies, actions taken in response to previous poor performances, and emotional responses to performance. A correlational analysis of these items along with the self-observation and judgment subscale scores provided a limited degree of convergent validity for the two subscales. Analyses of variance were done to determine the presence of differences in scoring patterns based on gender or reported ethnic origin. These results indicate slightly higher judgment subscale scores for women and members of minority groups. The implications of these differences are suggested as warranting future research. Future uses of the SEVSI - P include classroom use to assist students self-evaluate their exam performances in order to increase their achievement. Future research using the SEVSI - P to determine the causal relationships between self-evaluation, actual achievement, and other social cognitive constructs such as self-efficacy are suggested.

Negative beliefs about accepting coworker help: Implications for employee attitudes, job performance, and reputation.

PubMed

Thompson, Phillip S; Bolino, Mark C

2018-04-16

For more than 30 years, researchers have investigated interpersonal helping in organizations, with much of this work focusing on understanding why employees help their colleagues. Although this is important, it is also critical that employees are willing to accept assistance that is offered by peers. Indeed, helping behavior should only enhance individual and organizational effectiveness if employees are actually willing to accept offers of assistance. Unfortunately, employees may sometimes have reservations about accepting help from their peers. In four studies, we examine the negative beliefs that employees have about accepting help from coworkers. In Study 1, we use inductive research to qualitatively understand why employees accept or decline coworker help. In Study 2, we develop a preliminary, second-order reflective measure of negative beliefs about accepting coworker help that is indicated by the five specific (first-order) reservations about accepting help identified in Study 1-diminished image, reciprocity obligation, self-reliance, coworker mistrust, and coworker incompetence. In Study 3, we refine our scale and demonstrate its convergent, discriminant, and criterion-related validity. Finally, in Study 4, we investigate the consequences of negative beliefs about accepting coworker help. We find that those who hold more negative beliefs are less likely to receive help from peers (and supervisors), report more negative job attitudes, and have lower levels of in-role performance, citizenship behavior, and creativity. Furthermore, employees with more negative beliefs about accepting help from coworkers are seen less favorably by their supervisors. Implications and future research directions are discussed. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Experimental Evaluation of a Low Emissions High Performance Duct Burner for Variable Cycle Engines (VCE)

NASA Technical Reports Server (NTRS)

Lohmann, R. P.; Mador, R. J.

1979-01-01

An evaluation was conducted with a three stage Vorbix duct burner to determine the performance and emissions characteristics of the concept and to refine the configuration to provide acceptable durability and operational characteristics for its use in the variable cycle engine (VCE) testbed program. The tests were conducted at representative takeoff, transonic climb, and supersonic cruise inlet conditions for the VSCE-502B study engine. The test stand, the emissions sampling and analysis equipment, and the supporting flow visualization rigs are described. The performance parameters including the fuel-air ratio, the combustion efficiency/exit temperature, thrust efficiency, and gaseous emissions calculations are defined. The test procedures are reviewed and the results are discussed.

Retrofit device to improve vapor compression cooling system performance by dynamic blower speed modulation

DOEpatents

Roth, Robert Paul; Hahn, David C.; Scaringe, Robert P.

2015-12-08

A device and method are provided to improve performance of a vapor compression system using a retrofittable control board to start up the vapor compression system with the evaporator blower initially set to a high speed. A baseline evaporator operating temperature with the evaporator blower operating at the high speed is recorded, and then the device detects if a predetermined acceptable change in evaporator temperature has occurred. The evaporator blower speed is reduced from the initially set high speed as long as there is only a negligible change in the measured evaporator temperature and therefore a negligible difference in the compressor's power consumption so as to obtain a net increase in the Coefficient of Performance.

Construct validity of the individual work performance questionnaire.

PubMed

Koopmans, Linda; Bernaards, Claire M; Hildebrandt, Vincent H; de Vet, Henrica C W; van der Beek, Allard J

2014-03-01

To examine the construct validity of the Individual Work Performance Questionnaire (IWPQ). A total of 1424 Dutch workers from three occupational sectors (blue, pink, and white collar) participated in the study. First, IWPQ scores were correlated with related constructs (convergent validity). Second, differences between known groups were tested (discriminative validity). First, IWPQ scores correlated weakly to moderately with absolute and relative presenteeism, and work engagement. Second, significant differences in IWPQ scores were observed for workers differing in job satisfaction, and workers differing in health. Overall, the results indicate acceptable construct validity of the IWPQ. Researchers are provided with a reliable and valid instrument to measure individual work performance comprehensively and generically, among workers from different occupational sectors, with and without health problems.

Demonstration of a Non-Toxic Reaction Control Engine

NASA Technical Reports Server (NTRS)

Robinson, Philip J.; Turpin, Alicia A.; Veith, Eric M.

2007-01-01

T:hree non-toxic demonstration reaction control engines (RCE) were successfully tested at the Aerojet Sacramento facility under a technology contract sponsored by the National Aeronautics and Space Administration's (NASA) Marshall Space Flight Center (MSFC). The goals of the NASA MSFC contract (NAS8-01109) were to develop and expand the technical maturity of a non-toxic, on-orbit auxiliary propulsion system (APS) thruster under the auspices of the Exploration Systems Mission Directorate. The demonstration engine utilized Liquid Oxygen (LOX) and Ethanol as propellants to produce 870 lbf thrust. The Aerojet RCE's were successfully acceptance tested over a broad range of operating conditions. Steady state tests evaluated engine response to varying chamber pressures and mixture ratios. In addition to the steady state tests, a variety of pulsing tests were conducted over a wide range of electrical pulse widths (EPW). Each EPW condition was also tested over a range of percent duty cycles (DC), and bit impulse and pulsing specific impulse were determined for each of these conditions. Subsequent to acceptance testing at Aerojet, these three engines were delivered to the NASA White Sands Test Facility (WSTF) in April 2005 for incorporation into a cryogenic Auxiliary Propulsion System Test Bed (APSTB). The APSTB is a test article that will be utilized in an altitude test cell to simulate anticipated mission applications. The objectives of this APSTB testing included evaluation of engine performance over an extended duty cycle map of propellant pressure and temperature, as well as engine and system performance at typical mission duty cycles over extended periods of time. This paper provides acceptance test results and a status of the engine performance as part of the system level testing.

Demonstration of a Non-Toxic Reaction Control Engine

NASA Technical Reports Server (NTRS)

Robinson, Philip J.; Veith, Eric M.; Turpin, Alicia A.

2006-01-01

Three non-toxic demonstration reaction control engines (RCE) were successfully tested at the Aerojet Sacramento facility under a technology contract sponsored by the National Aeronautics and Space Administration s (NASA) Marshall Space Flight Center (MSFC). The goals of the NASA MSFC contract (NAS8-01109) were to develop and expand the technical maturity of a non-toxic, on-orbit auxiliary propulsion system (APS) thruster under the auspices of the Exploration Systems Mission Directorate. The demonstration engine utilized Liquid Oxygen (LOX) and Ethanol as propellants to produce 870 lbf thrust. The Aerojet RCE s were successfully acceptance tested over a broad range of operating conditions. Steady state tests evaluated engine response to varying chamber pressures and mixture ratios. In addition to the steady state tests, a variety of pulsing tests were conducted over a wide range of electrical pulse widths (EPW). Each EPW condition was also tested over a range of percent duty cycles (DC), and bit impulse and pulsing specific impulse were determined for each of these conditions. White Sands Test Facility (WSTF) in April 2005 for incorporation into a cryogenic Auxiliary Propulsion System Test Bed (APSTB). The APSTB is a test article that will be utilized in an altitude test cell to simulate anticipated mission applications. The objectives of this APSTB testing included evaluation of engine performance over an extended duty cycle map of propellant pressure and temperature, as well as engine and system performance at typical mission duty cycles over extended periods of time. This paper provides acceptance test results and a status of the engine performance as part of the system level testing. Subsequent to acceptance testing at Aerojet, these three engines were delivered to the NASA

External quality assessment of urine particle identification: a Northern European experience.

PubMed

Kouri, Timo T; Makkonen, Pirjo

2015-11-01

External quality assessment (EQA) schemes for urinalysis have been provided by Labquality Ltd, the publicly owned EQA service provider in Finland, since the 1980s. In 2014, the scheme on urine particle identification had 329 participating laboratories, out of which 60% from 19 countries were outside Finland. Each of the four annual web-based rounds were distributed with four Sternheimer-stained images from a single patient sample, as viewed both by bright-field and phase-contrast optics. Participants reported classified categories either at the basic or at the advanced level. Participating laboratories received assessment of their analytical performance as compared to their peers, including reflections from clinical data and preanalytical detail of the specimen. In general, reporting of basic urine particles succeeded in the eight schemes during the years 2013-2014 as follows: red blood cells 82%-92%, white blood cells 82%-97%, squamous epithelial cells 92%-98%, casts 84%-94%, and small epithelial cells 73%-83% (minimum and maximum of expected or accepted reports). This basic level of differentiation is used in routine laboratory reports, or as verification of results produced by automated instruments. Considerable effort is needed to standardise national procedures and reporting formats, in order to improve the shown figures internationally. Future technologies may help to alleviate limitations created by single digital images. Despite improvements, degenerating cells and casts always exhibit intermediate forms creating disputable classifications. That is why assessment of performance should encompass justified acceptable categories into the assessed outcomes. Preanalytical and clinical detail provide essential added value to morphological findings.

48 CFR 5.202 - Exceptions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... contract action results from acceptance of a proposal under the Small Business Innovation Development Act... proposal and acceptance is based solely upon the unique capability of the source to perform the particular...

48 CFR 5.202 - Exceptions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... contract action results from acceptance of a proposal under the Small Business Innovation Development Act... proposal and acceptance is based solely upon the unique capability of the source to perform the particular...

Flight assessment of a data-link-based navigation-guidance concept

NASA Technical Reports Server (NTRS)

Abbott, T. S.

1983-01-01

With the proposed introduction of a data-link provision into the Air-Traffic-control (ATC) system, the capability will exist to supplement the ground-air, voice (radio) link with digital, data-link information. Additionally, ATC computers could provide, via the data link guidance and navigation information to the pilot which could then be presented in much the same manner as conventional navigation information. The primary objective of this study was to assess the feasibility and acceptability of using 4-sec and 12-sec information updating to drive conventional cockpit-navigation-instrument formats for path-tracking guidance. A flight test, consisting of 19 tracking tasks, was conducted and, through the use of pilot questionnaires and performance data, the following results were obtained. From a performance standpoint, the 4-sec and 12-sec updating led to a slight degradation in path-tracking performance, relative to continuous updating. From the pilot's viewpoint, the 12-sec data interval was suitable for long path segments (greater than 2 min of flight time), but it was difficult to use on shorter segments because of higher work load and insufficient stabilization time. Overall, it was determined that the utilization of noncontinuous data for navigation was both feasible and acceptable for the prescribed task.

The Relative Importance of Psychological Acceptance and Emotional Intelligence to Workplace Well-Being

ERIC Educational Resources Information Center

Donaldson-Feilder, Emma J.; Bond, Frank W.

2004-01-01

Psychological acceptance (acceptance) and emotional intelligence (EI) are two relatively new individual characteristics that are hypothesised to affect well-being and performance at work. This study compares both of them, in terms of their ability to predict various well-being outcomes (i.e. general mental health, physical well-being, and job…

Moving beyond pain scores: Multidimensional pain assessment is essential for adequate pain management after surgery

PubMed Central

Vissers, Kris C. P.; van der Sande, Rob; Bronkhorst, Ewald; Lerou, Jos G. C.; Steegers, Monique A. H.

2017-01-01

Background Clinical experience teaches us that patients are willing to accept postoperative pain, despite high pain intensity scores. Nevertheless, relationships between pain scores and other methods of pain assessment, e.g. acceptability of pain or its interference with physical functioning, are not fully established. Our aims were to examine these relationships. Methods A cross-sectional study was conducted on patients who underwent major surgery between January 2008 and August 2013. Using logistic regression, we quantified the relationships between movement-evoked pain scores on the numerical rating scale (NRS-MEP) and three dichotomous dependent variables: patient’s opinion on acceptability of pain (PO: acceptable or unacceptable pain); nurses’ observation of patient’s performance of necessary activities to expedite recovery (NO: good or bad performance); a compound measure judging the presence of the clinically desirable situation of acceptable pain associated with good patients’ performance (PONO: present or not). Using Receiver Operating Characteristics (ROC) analysis, NRS cut-off points were determined such that they best discriminate between patients having one versus the other outcome for PO, NO and PONO. Results 15,394 assessments were obtained in 9,082 patients in the first three postoperative days. Nine percent of the patients had unacceptable pain while having an NRS-MEP of 0–4. An estimated 47% (95%CI = 45%-49%) of patients with an NRS-MEP of 7 described their pain as acceptable on day one. Moreover, 33% (31%-35%) performed all required physical activities, and 22% (21%-24%) combined acceptable pain with appropriate movement. NRS cut-off points for PO, NO and PONO were five, four and four, respectively, but had insufficient discriminatory power. Conclusions Our results suggest pain management should be guided by the many dimensions of the patient’s pain experience, not solely by NRS cut-off points. Future research should evaluate the impact of such multidimensional pain assessment on patients’ functional outcome. PMID:28489926

Athletic Performance and Social Behavior as Predictors of Peer Acceptance in Children Diagnosed With Attention-Deficit/Hyperactivity Disorder

ERIC Educational Resources Information Center

Lopez-Williams, Andy; Chacko, Anil; Wymbs, Brian T.; Fabiano, Gregory A.; Seymour, Karen E.; Gnagy, Elizabeth M.; Chronis, Andrea M.; Burrows-MacLean, Lisa; Pelham, William E.; Morris, Tracy L.

2005-01-01

Sixty-three children between ages 6 and 12 who were enrolled in a summer treatment program for children with attention-deficit/hyperactivity disorder (ADHD) participated in a study designed to measure the relationship between social behaviors, athletic performance, and peer acceptance. Children were assessed on sport-specific skills of three major…

The Indicator Performance Estimate (IPE) Approach to Defining Acceptable Conditions in Wilderness

Treesearch

Steven Hollenhorst; Lisa Stull-Gardner

1992-01-01

Using data from a study conducted in the Cranberry Wilderness area, this paper describes how the Importance-Performance approach can be used to prioritize wilderness indicators and determine how much change from the pristine is acceptable. The approach uses two key types of information: (1) indicator importance, or visitor opinion as to which wilderness indicators have...

Effectiveness and acceptance of the intelligent speeding prediction system (ISPS).

PubMed

Zhao, Guozhen; Wu, Changxu

2013-03-01

The intelligent speeding prediction system (ISPS) is an in-vehicle speed assistance system developed to provide quantitative predictions of speeding. Although the ISPS's prediction of speeding has been validated, whether the ISPS can regulate a driver's speed behavior or whether a driver accepts the ISPS needs further investigation. Additionally, compared to the existing intelligent speed adaptation (ISA) system, whether the ISPS performs better in terms of reducing excessive speeds and improving driving safety needs more direct evidence. An experiment was conducted to assess and compare the effectiveness and acceptance of the ISPS and the ISA. We conducted a driving simulator study with 40 participants. System type served as a between-subjects variable with four levels: no speed assistance system, pre-warning system developed based on the ISPS, post-warning system ISA, and combined pre-warning and ISA system. Speeding criterion served as a within-subjects variable with two levels: lower (posted speed limit plus 1 mph) and higher (posted speed limit plus 5 mph) speed threshold. Several aspects of the participants' driving speed, speeding measures, lead vehicle response, and subjective measures were collected. Both pre-warning and combined systems led to greater minimum time-to-collision. The combined system resulted in slower driving speed, fewer speeding exceedances, shorter speeding duration, and smaller speeding magnitude. The results indicate that both pre-warning and combined systems have the potential to improve driving safety and performance. Copyright © 2012 Elsevier Ltd. All rights reserved.

SeaWiFS Technical Report Series. Volume 22: Prelaunch Acceptance Report for the SeaWiFS Radiometer

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor); Acker, James G. (Editor); Barnes, Robert A.; Barnes, William L.; Esaias, Wayne E.; Mcclain, Charles R.

1994-01-01

The final acceptance, or rejection, of the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) will be determined by the instrument's on-orbit operation. There is, however, an extensive set of laboratory measurements describing the operating characteristics of the radiometer. Many of the requirements in the Ocean Color Data Mission (OCDM) specifications can be checked only by laboratory measurements. Here, the calibration review panel examines the laboratory characterization and calibration of SeaWiFS in the light of the OCDM performance specification. Overall, the performance of the SeaWiFS instrument meets or exceeds the requirements of the OCDM contract in all but a few unimportant details. The detailed results of this examination are presented here by following the outline of the specifications, as found in the Contract. The results are presented in the form of requirements and compliance pairs. These results give conclusions on many, but not all, of the performance specifications. The acceptance by this panel of the performance of SeaWiFS must only be considered as an intermediate conclusion. The ultimate acceptance (or rejection) of the SeaWiFS data set will rely on the measurements made by the instrument on orbit.

Passion fruit juice with different sweeteners: sensory profile by descriptive analysis and acceptance.

PubMed

Rocha, Izabela Furtado de Oliveira; Bolini, Helena Maria André

2015-03-01

This study evaluated the effect of different sweeteners on the sensory profile, acceptance, and drivers of preference of passion fruit juice samples sweetened with sucrose, aspartame, sucralose, stevia, cyclamate/saccharin blend 2:1, and neotame. Sensory profiling was performed by 12 trained assessors using quantitative descriptive analysis (QDA). Acceptance tests (appearance, aroma, flavor, texture and overall impression) were performed with 124 consumers of tropical fruit juice. Samples with sucrose, aspartame and sucralose showed similar sensory profile (P < 0.05), without bitter taste, bitter aftertaste, and metallic taste, and samples with sucrose and sucralose did not differ from each other for the attribute sweet aftertaste. Passion fruit flavor affected positively and sweet aftertaste affected negatively the acceptance of the samples. Samples sweetened with aspartame, sucralose, and sucrose presented higher acceptance scores for the attributes flavor, texture, and overall impression, with no significant (P < 0.05) differences between them. Aspartame and sucralose can be good substitutes for sucrose in passion fruit juice.

Definition of acceptance criteria for the ITER divertor plasma-facing components through systematic experimental analysis

NASA Astrophysics Data System (ADS)

Escourbiac, F.; Richou, M.; Guigon, R.; Constans, S.; Durocher, A.; Merola, M.; Schlosser, J.; Riccardi, B.; Grosman, A.

2009-12-01

Experience has shown that a critical part of the high-heat flux (HHF) plasma-facing component (PFC) is the armour to heat sink bond. An experimental study was performed in order to define acceptance criteria with regards to thermal hydraulics and fatigue performance of the International Thermonuclear Experimental Reactor (ITER) divertor PFCs. This study, which includes the manufacturing of samples with calibrated artificial defects relevant to the divertor design, is reported in this paper. In particular, it was concluded that defects detectable with non-destructive examination (NDE) techniques appeared to be acceptable during HHF experiments relevant to heat fluxes expected in the ITER divertor. On the basis of these results, a set of acceptance criteria was proposed and applied to the European vertical target medium-size qualification prototype: 98% of the inspected carbon fibre composite (CFC) monoblocks and 100% of tungsten (W) monoblock and flat tiles elements (i.e. 80% of the full units) were declared acceptable.

Passion fruit juice with different sweeteners: sensory profile by descriptive analysis and acceptance

PubMed Central

Rocha, Izabela Furtado de Oliveira; Bolini, Helena Maria André

2015-01-01

This study evaluated the effect of different sweeteners on the sensory profile, acceptance, and drivers of preference of passion fruit juice samples sweetened with sucrose, aspartame, sucralose, stevia, cyclamate/saccharin blend 2:1, and neotame. Sensory profiling was performed by 12 trained assessors using quantitative descriptive analysis (QDA). Acceptance tests (appearance, aroma, flavor, texture and overall impression) were performed with 124 consumers of tropical fruit juice. Samples with sucrose, aspartame and sucralose showed similar sensory profile (P < 0.05), without bitter taste, bitter aftertaste, and metallic taste, and samples with sucrose and sucralose did not differ from each other for the attribute sweet aftertaste. Passion fruit flavor affected positively and sweet aftertaste affected negatively the acceptance of the samples. Samples sweetened with aspartame, sucralose, and sucrose presented higher acceptance scores for the attributes flavor, texture, and overall impression, with no significant (P < 0.05) differences between them. Aspartame and sucralose can be good substitutes for sucrose in passion fruit juice. PMID:25838891

Acceptance of selective contracting: the role of trust in the health insurer

PubMed Central

2013-01-01

Background In a demand oriented health care system based on managed competition, health insurers have incentives to become prudent buyers of care on behalf of their enrolees. They are allowed to selectively contract care providers. This is supposed to stimulate competition between care providers and both increase the quality of care and contain costs in the health care system. However, health insurers are reluctant to implement selective contracting; they believe their enrolees will not accept this. One reason, insurers believe, is that enrolees do not trust their health insurer. However, this has never been studied. This paper aims to study the role played by enrolees’ trust in the health insurer on their acceptance of selective contracting. Methods An online survey was conducted among 4,422 people insured through a large Dutch health insurance company. Trust in the health insurer, trust in the purchasing strategy of the health insurer and acceptance of selective contracting were measured using multiple item scales. A regression model was constructed to analyse the results. Results Trust in the health insurer turned out to be an important prerequisite for the acceptance of selective contracting among their enrolees. The association of trust in the purchasing strategy of the health insurer with acceptance of selective contracting is stronger for older people than younger people. Furthermore, it was found that men and healthier people accepted selective contracting by their health insurer more readily. This was also true for younger people with a low level of trust in their health insurer. Conclusion This study provides insight into factors that influence people’s acceptance of selective contracting by their health insurer. This may help health insurers to implement selective contracting in a way their enrolees will accept and, thus, help systems of managed competition to develop. PMID:24083663

Acceptance of selective contracting: the role of trust in the health insurer.

PubMed

Bes, Romy E; Wendel, Sonja; Curfs, Emile C; Groenewegen, Peter P; de Jong, Judith D

2013-10-02

In a demand oriented health care system based on managed competition, health insurers have incentives to become prudent buyers of care on behalf of their enrolees. They are allowed to selectively contract care providers. This is supposed to stimulate competition between care providers and both increase the quality of care and contain costs in the health care system. However, health insurers are reluctant to implement selective contracting; they believe their enrolees will not accept this. One reason, insurers believe, is that enrolees do not trust their health insurer. However, this has never been studied. This paper aims to study the role played by enrolees' trust in the health insurer on their acceptance of selective contracting. An online survey was conducted among 4,422 people insured through a large Dutch health insurance company. Trust in the health insurer, trust in the purchasing strategy of the health insurer and acceptance of selective contracting were measured using multiple item scales. A regression model was constructed to analyse the results. Trust in the health insurer turned out to be an important prerequisite for the acceptance of selective contracting among their enrolees. The association of trust in the purchasing strategy of the health insurer with acceptance of selective contracting is stronger for older people than younger people. Furthermore, it was found that men and healthier people accepted selective contracting by their health insurer more readily. This was also true for younger people with a low level of trust in their health insurer. This study provides insight into factors that influence people's acceptance of selective contracting by their health insurer. This may help health insurers to implement selective contracting in a way their enrolees will accept and, thus, help systems of managed competition to develop.

HIV Pre-Exposure Prophylaxis Interest among Female Sex Workers in Guangxi, China

PubMed Central

Zou, Yunfeng; Yang, Xiaobo; Abdullah, Abu S.; Zhong, Xiaoni; Ruan, Yuhua; Lin, Xinqin; Li, Mingqiang; Wu, Deren; Jiang, Junjun; Xie, Peiyan; Huang, Jiegang; Liang, Bingyu; Zhou, Bo; Su, Jinming; Liang, Hao; Huang, Ailong

2014-01-01

Objectives Acceptability of pre-exposure prophylaxis (PrEP) and willingness to participate in a clinical trial for both safety and efficacy of PrEP were investigated among female sex workers (FSWs) in Guangxi, China. Methods A cross-sectional study was performed in three cities in Guangxi. Structured, self-administered questionnaires were used to assess the acceptability of PrEP and the willingness to participate in a clinical trial. Multivariable logistic regression models were fitted to identify predictors. Results Among 405 participants, 15.1% had heard of PrEP. If PrEP was deemed to be effective, safe and provided for free, 85.9% reported that they would accept it, and 54.3% of those who accepted PrEP said that they would participate in a clinical trial. The increased acceptability of PrEP was associated with working in male dominated venues, higher income, a poor family relationship, better HIV/AIDS knowledge, not realizing HIV risk from unfamiliar clients, not being forced to use condoms by the gatekeepers, consistent use of condoms, and use of drugs to prevent STD infection. The increased willingness to participate in a clinical trial was associated with a poor family relationship, better HIV/AIDS knowledge, not realizing HIV risk from unfamiliar clients, a willingness to adhere to daily PreP use, and not being concerned about discrimination by others. The main reason for rejecting PrEP or participating in a clinical trial was the concern about the side effects of PrEP. Conclusions Acceptability of PrEP among Guangxi FSWs is relatively high, indicating that PrEP intervention programs may be feasible for Chinese FSWs. Given the fact that most of the participants had never heard of PrEP before, and that family, gatekeepers, and social discrimination could significantly affect its acceptability, a comprehensive mix of multiple interventions is necessary for the successful implementation of a PrEP program among this population in Guangxi. PMID:24465956

Meal Replacement Mass Reduction and Integration Acceptability Study

NASA Technical Reports Server (NTRS)

Sirmons, T.; Cooper, M.; Douglas, G.; Barrett, A.; Richardson, M.; Arias, D.; Schneiderman, J.; Slack, K.; Ploutz-Snyder R.

2016-01-01

NASA, in planning for long duration missions, has an imperative to provide a food system with the necessary nutrition, acceptability, and safety to ensure sustainment of crew health and performance. The Orion Multi-Purpose Crew Vehicle (MPCV) and future exploration missions are mass constrained; therefore we are challenged to reduce the mass of the food system by 10% while maintaining safety, nutrition, and acceptability for exploration missions. Food bars have previously been used to supplement meals in the Skylab food system, indicating that regular consumption of bars will be acceptable. However, commercially available products do not meet the requirements for a full meal replacement in the spaceflight food system. The purpose of this task is to develop a variety of nutritionally balanced breakfast replacement bars, which meet spaceflight nutritional, microbiological, sensorial, and shelf-life requirements, while enabling a 10% food mass savings. To date, six nutrient-dense meal replacement bars have been developed, using both traditional methods of compression as well as novel ultrasonic compression technologies developed by Creative Resonance Inc. (Phoenix, AZ). All bars will be prioritized based on acceptability and the four top candidates will be evaluated in the Human Exploration Research Analog (HERA) to assess the frequency with which actual meal replacement options may be implemented. Specifically, overall impact to mood, satiety, dietary discomfort, and satisfaction with food will be analyzed to inform successful implementation strategies. In addition, these bars will be evaluated based on final product sensory acceptability, nutritional stability, qualitative stability of analytical measurements (i.e. water activity and texture), and microbiological compliance over two years of storage at room temperature and potential temperature abuse conditions to predict long-term acceptability. It is expected that this work will enable a successful meal replacement strategy to be implemented that maintains crew food consumption and health, while informing exploration missions with appropriate mass savings expectations.

Acceptability of picture archiving and communication system (PACS) among hospital healthcare personnel based on a unified theory of acceptance and use of technology

PubMed Central

Ahmadi, Maryam; Mehrabi, Nahid; Sheikhtaheri, Abbas; Sadeghi, Mojtaba

2017-01-01

Background and aim The picture archiving and communication system (PACS) is a healthcare system technology which manages medical images and integrates equipment through a network. There are some theories about the use and acceptance of technology by people to describe the behavior and attitudes of end users towards information technologies. We investigated the influential factors on users’ acceptance of PACS in the military hospitals of Tehran. Methods In this applied analytical and cross-sectional study, 151 healthcare employees of military hospitals who had experience in using the PACS system were investigated. Participants were selected by census. The following variables were considered: performance expectancy, efforts expectancy, social influence, facilitating conditions and behavioral intention. Data were gathered using a questionnaire. Its validity and reliability were approved by a panel of experts and was piloted with 30 hospital healthcare staff (Cronbach’s alpha =0.91). Spearman correlation coefficient and multiple linear regression analysis were used in analyzing the data. Results Expected performance, efforts expectancy, social impact and facilitating conditions had a significant relationship with behavioral intention. The multiple regression analysis indicated that only performance expectancy can predict the user’s behavioral intentions to use PACS technology. Conclusion Performance and effort expectancies are quite influential in accepting the use of PACS in hospitals. All healthcare personnel should become aware that using such technology is necessary in a hospital. Knowing the influencing factors that affect the acceptance of using new technology can help in improving its use, especially in a healthcare system. This can improve the offered healthcare services’ quality. PMID:29038717

Dental ceramics: a CIEDE2000 acceptability thresholds for lightness, chroma and hue differences.

PubMed

Perez, María Del Mar; Ghinea, Razvan; Herrera, Luis Javier; Ionescu, Ana Maria; Pomares, Héctor; Pulgar, Rosa; Paravina, Rade D

2011-12-01

To determine the visual 50:50% acceptability thresholds for lightness, chroma and hue for dental ceramics using CIEDE2000(K(L):K(C):K(H)) formula, and to evaluate the formula performance using different parametric factors. A 30-observer panel evaluated three subsets of ceramic samples: lightness subset (|ΔL'/ΔE(00)| ≥ 0.9), chroma subset (|ΔC'/ΔE(00)| ≥ 0.9) and hue subset (|ΔH'/ΔE(00)| ≥ 0.9). A Takagi-Sugeno-Kang Fuzzy Approximation was used as fitting procedure, and the 50:50% acceptability thresholds were calculated. A t-test was used in statistical analysis of the thresholds values. The performance of the CIEDE2000(1:1:1) and CIEDE2000(2:1:1) colour difference formulas against visual results was tested using PF/3 performance factor. The 50:50% CIEDE2000 acceptability thresholds were ΔL' = 2.92 (95% CI 1.22-4.96; r(2) = 0.76), ΔC' = 2.52 (95% CI 1.31-4.19; r(2) = 0.71) and ΔH' = 1.90 (95% CI 1.63-2.15; r(2) = 0.88). The 50:50% acceptability threshold for colour difference (ΔE') for CIEDE2000(1:1:1) was 1.87, whilst corresponding value for CIEDE2000(2:1:1) was 1.78. The PF/3 values were 139.86 for CIEDE2000(1:1:1), and 132.31 for CIEDE2000(2:1:1). There was a statistically significant difference amongst CIEDE2000 50:50% acceptability thresholds for lightness, chroma and hue differences for dental ceramics. The CIEDE2000(2:1:1) formula performed better than CIEDE2000(1:1:1). Copyright © 2011 Elsevier Ltd. All rights reserved.

The indicator performance estimate approach to determining acceptable wilderness conditions

NASA Astrophysics Data System (ADS)

Hollenhorst, Steven; Gardner, Lisa

1994-11-01

Using data from a study conducted in the Cranberry Wilderness Area of West Virginia, United States, this paper describes how a modified importance—performance approach can be used to prioritize wilderness indicators and determine how much change from the pristine is acceptable. The approach uses two key types of information: (1) indicator importance, or visitor opinion as to which wilderness indicators have the greatest influence on their experience, and (2) management performance, or the extent to which actual indicator conditions exceed or are within visitor expectations. Performance was represented by calculating indicator performance estimates (IPEs), as defined by standardized differences between actual conditions and visitor preferences for each indicator. The results for each indicator are then presented graphically on a four-quadrant matrix for objective interpretation. Each quadrant represents a management response: keep up the good work, concentrate here, low priority, or possible overkill. The technique allows managers to more systematically and effectively utilize information routinely collected during the limits of acceptable change wilderness planning process.

Quality assurance and risk management: Perspectives on Human Factors Certification of Advanced Aviation Systems

NASA Technical Reports Server (NTRS)

Taylor, Robert M.; Macleod, Iain S.

1994-01-01

This paper is based on the experience of engineering psychologists advising the U.K. Ministry of Defense (MoD) on the procurement of advanced aviation systems that conform to good human engineering (HE) practice. Traditional approaches to HE in systems procurement focus on the physical nature of the human-machine interface. Advanced aviation systems present increasingly complex design requirements for human functional integration, information processing, and cognitive task performance effectiveness. These developing requirements present new challenges for HE quality assurance (QA) and risk management, requiring focus on design processes as well as on design content or product. A new approach to the application of HE, recently adopted by NATO, provides more systematic ordering and control of HE processes and activities to meet the challenges of advanced aircrew systems design. This systematic approach to HE has been applied by MoD to the procurement of mission systems for the Royal Navy Merlin helicopter. In MoD procurement, certification is a judicial function, essentially independent of the service customer and industry contractor. Certification decisions are based on advice from MoD's appointed Acceptance Agency. Test and evaluation (T&E) conducted by the contractor and by the Acceptance Agency provide evidence for certification. Certification identifies limitations of systems upon release to the service. Evidence of compliance with HE standards traditionally forms the main basis of HE certification and significant non-compliance could restrict release. The systems HE approach shows concern for the quality of processes as well as for the content of the product. Human factors certification should be concerned with the quality of HE processes as well as products. Certification should require proof of process as well as proof of content and performance. QA criteria such as completeness, consistency, timeliness, and compatibility provide generic guidelines for progressive acceptance and certification of HE processes. Threats to the validity of certification arise from problems and assumptions in T&E methods. T&E should seek to reduce the risk of specification non-compliance and certification failure.

Anesthesia and euthanasia in zebrafish.

PubMed

Matthews, Monte; Varga, Zoltán M

2012-01-01

Because of the relative ease of embryonic manipulation and observation, the ability to produce a great number of genetic mutations, efficient screening methods, and the continued advance of molecular genetic tools, such as the progress in sequencing and mapping of the zebrafish genome, the use of zebrafish (Danio rerio) as a biomedical model organism continues to expand. However, studies involving zebrafish husbandry and veterinary care struggle to keep pace with scientific progress. This article outlines some of the current, acceptable methods for providing anesthesia and euthanasia and provides some examples of how performance-based approaches can be used to advance the relatively limited number of anesthetic and euthanizing techniques available for zebrafish.

Living the mission: medical assistance to Nigeria.

PubMed

Patterson, Jan

2007-11-01

In 2001, a team of health care providers from Tennessee undertook a medical mission to the Nigerian Christian Hospital in Aba, Nigeria. During A 10-day period, the surgical team applied US and AORN standards when possible, but found they also had to accept some of the local standards because of the lack of medical supplies, cleaning supplies, and properly functioning equipment in this impoverished area. The 60 surgeries performed by the team was a small number relative to the community's overwhelming needs, but the team members were rewarded with the knowledge that they had helped many patients by providing them with quality care that normally would have been unavailable.

Complementary approaches to palliative oncological care.

PubMed

Zappa, Simone B; Cassileth, Barrie R

2003-01-01

The popularity of complementary and alternative medicine (CAM) has increased tremendously in recent years. Thus, it is imperative to distinguish between alternative therapies that can be dangerous and complementary therapies that are primarily palliative and augment conventional treatment. Memorial Sloan-Kettering Cancer Center's Integrative Medicine Service offers complementary therapies to patients in an attempt to improve quality of life and provide symptom management. In addition to clinical services, it also provides education to health care professionals and the public and performs clinical and laboratory research on complementary modalities and the antitumor properties of botanicals. If CAM is to be accepted by mainstream medicine, research must be done usingstandard research methodologies.

A New Method for the Evaluation and Prediction of Base Stealing Performance.

PubMed

Bricker, Joshua C; Bailey, Christopher A; Driggers, Austin R; McInnis, Timothy C; Alami, Arya

2016-11-01

Bricker, JC, Bailey, CA, Driggers, AR, McInnis, TC, and Alami, A. A new method for the evaluation and prediction of base stealing performance. J Strength Cond Res 30(11): 3044-3050, 2016-The purposes of this study were to evaluate a new method using electronic timing gates to monitor base stealing performance in terms of reliability, differences between it and traditional stopwatch-collected times, and its ability to predict base stealing performance. Twenty-five healthy collegiate baseball players performed maximal effort base stealing trials with a right and left-handed pitcher. An infrared electronic timing system was used to calculate the reaction time (RT) and total time (TT), whereas coaches' times (CT) were recorded with digital stopwatches. Reliability of the TGM was evaluated with intraclass correlation coefficients (ICCs) and coefficient of variation (CV). Differences between the TGM and traditional CT were calculated with paired samples t tests Cohen's d effect size estimates. Base stealing performance predictability of the TGM was evaluated with Pearson's bivariate correlations. Acceptable relative reliability was observed (ICCs 0.74-0.84). Absolute reliability measures were acceptable for TT (CVs = 4.4-4.8%), but measures were elevated for RT (CVs = 32.3-35.5%). Statistical and practical differences were found between TT and CT (right p = 0.00, d = 1.28 and left p = 0.00, d = 1.49). The TGM TT seems to be a decent predictor of base stealing performance (r = -0.49 to -0.61). The authors recommend using the TGM used in this investigation for athlete monitoring because it was found to be reliable, seems to be more precise than traditional CT measured with a stopwatch, provides an additional variable of value (RT), and may predict future performance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hornung, Richard D.; Hones, Holger E.

The RAJA Performance Suite is designed to evaluate performance of the RAJA performance portability library on a wide variety of important high performance computing (HPC) algorithmic lulmels. These kernels assess compiler optimizations and various parallel programming model backends accessible through RAJA, such as OpenMP, CUDA, etc. The Initial version of the suite contains 25 computational kernels, each of which appears in 6 variants: Baseline SequcntiaJ, RAJA SequentiaJ, Baseline OpenMP, RAJA OpenMP, Baseline CUDA, RAJA CUDA. All variants of each kernel perform essentially the same mathematical operations and the loop body code for each kernel is identical across all variants. Theremore » are a few kernels, such as those that contain reduction operations, that require CUDA-specific coding for their CUDA variants. ActuaJ computer instructions executed and how they run in parallel differs depending on the parallel programming model backend used and which optimizations are perfonned by the compiler used to build the Perfonnance Suite executable. The Suite will be used primarily by RAJA developers to perform regular assessments of RAJA performance across a range of hardware platforms and compilers as RAJA features are being developed. It will also be used by LLNL hardware and software vendor panners for new defining requirements for future computing platform procurements and acceptance testing. In particular, the RAJA Performance Suite will be used for compiler acceptance testing of the upcoming CORAUSierra machine {initial LLNL delivery expected in late-2017/early 2018) and the CORAL-2 procurement. The Suite will aJso be used to generate concise source code reproducers of compiler and runtime issues we uncover so that we may provide them to relevant vendors to be fixed.« less

40 CFR 91.313 - Analyzers required.

Code of Federal Regulations, 2012 CFR

2012-07-01

... condensation is acceptable. If water is removed by condensation, the sample gas temperature or sample dew point.... A water trap performing this function is an acceptable method. Means other than condensation may be...

40 CFR 90.313 - Analyzers required.

Code of Federal Regulations, 2013 CFR

2013-07-01

... condensation is acceptable. If water is removed by condensation, the sample gas temperature or sample dew point.... A water trap performing this function is an acceptable method. Means other than condensation may be...

40 CFR 90.313 - Analyzers required.

Code of Federal Regulations, 2011 CFR

2011-07-01

... condensation is acceptable. If water is removed by condensation, the sample gas temperature or sample dew point.... A water trap performing this function is an acceptable method. Means other than condensation may be...

40 CFR 91.313 - Analyzers required.

Code of Federal Regulations, 2014 CFR

2014-07-01

... condensation is acceptable. If water is removed by condensation, the sample gas temperature or sample dew point.... A water trap performing this function is an acceptable method. Means other than condensation may be...

40 CFR 91.313 - Analyzers required.

Code of Federal Regulations, 2013 CFR

2013-07-01

... condensation is acceptable. If water is removed by condensation, the sample gas temperature or sample dew point.... A water trap performing this function is an acceptable method. Means other than condensation may be...

40 CFR 91.313 - Analyzers required.

Code of Federal Regulations, 2011 CFR

2011-07-01

... condensation is acceptable. If water is removed by condensation, the sample gas temperature or sample dew point.... A water trap performing this function is an acceptable method. Means other than condensation may be...

40 CFR 90.313 - Analyzers required.

Code of Federal Regulations, 2014 CFR

2014-07-01

... condensation is acceptable. If water is removed by condensation, the sample gas temperature or sample dew point.... A water trap performing this function is an acceptable method. Means other than condensation may be...

40 CFR 90.313 - Analyzers required.

Code of Federal Regulations, 2012 CFR

2012-07-01

... condensation is acceptable. If water is removed by condensation, the sample gas temperature or sample dew point.... A water trap performing this function is an acceptable method. Means other than condensation may be...

Real-time ultrasonic weld evaluation system

NASA Astrophysics Data System (ADS)

Katragadda, Gopichand; Nair, Satish; Liu, Harry; Brown, Lawrence M.

1996-11-01

Ultrasonic testing techniques are currently used as an alternative to radiography for detecting, classifying,and sizing weld defects, and for evaluating weld quality. Typically, ultrasonic weld inspections are performed manually, which require significant operator expertise and time. Thus, in recent years, the emphasis is to develop automated methods to aid or replace operators in critical weld inspections where inspection time, reliability, and operator safety are major issues. During this period, significant advances wee made in the areas of weld defect classification and sizing. Very few of these methods, however have found their way into the market, largely due to the lack of an integrated approach enabling real-time implementation. Also, not much research effort was directed in improving weld acceptance criteria. This paper presents an integrated system utilizing state-of-the-art techniques for a complete automation of the weld inspection procedure. The modules discussed include transducer tracking, classification, sizing, and weld acceptance criteria. Transducer tracking was studied by experimentally evaluating sonic and optical position tracking techniques. Details for this evaluation are presented. Classification is obtained using a multi-layer perceptron. Results from different feature extraction schemes, including a new method based on a combination of time and frequency-domain signal representations are given. Algorithms developed to automate defect registration and sizing are discussed. A fuzzy-logic acceptance criteria for weld acceptance is presented describing how this scheme provides improved robustness compared to the traditional flow-diagram standards.

Experience with 161 cases of anterior exposure of the thoracic and lumbar spine in an acute care surgery model: impact of exposure level and underlying pathology on morbidity.

PubMed

Seoudi, Hani; Laporta, Matthew; Griffen, Margaret; Rizzo, Anne; Pullarkat, Ranjit

2013-08-15

Retrospective chart review. To evaluate the outcomes of anterior exposure of the thoracic and lumbar spine by an acute care surgery service. Spine surgeons typically require an "approach surgeon" to provide anterior exposure of the thoracic and lumbar spine. We hypothesized that a dedicated acute care surgery service can perform those operations with acceptable morbidity and mortality. A retrospective review of 161 trauma and nontrauma patients was performed. All cases were performed at a level I trauma center with a dedicated acute care surgery service. In-hospital morbidity and mortality were evaluated. A brief description of the operative techniques used by our group is also provided. Of the 161 patients, 59 (37%) were trauma patients. Ninety-three patients (58%) had anterolateral retroperitoneal exposure of the thoracic and lumbar spine. Sixty-eight patients (42%) had anterior retroperitoneal midline exposure of the lumbar and lumbosacral spine. Total morbidity was 9.3% (7.4% for trauma patients and 1.8% for non trauma patients). Morbidity was highest in patients who had anterolateral exposure of the thoracic and lumbar spine (6.8%). Morbidity in patients who had midline exposure of L4 to S1 was 0%. Total mortality was 1.2% (3.3% for trauma patients and 0% for nontrauma patients). The acute care surgery service gained 3141 physician work relative value units (RVU) by performing those operations. Anterior exposure of the thoracic and lumbar spine both for trauma and nontrauma related indications can be performed with acceptable morbidity and mortality by a dedicated acute care surgery service. Morbidity and mortality were higher in trauma patients and in those who underwent thoracolumbar procedures. Patients who had midline exposure of L4 to S1 for degenerative disc disease had the lowest morbidity. 4.

Can trained lay providers perform HIV testing services? A review of national HIV testing policies.

PubMed

Flynn, David E; Johnson, Cheryl; Sands, Anita; Wong, Vincent; Figueroa, Carmen; Baggaley, Rachel

2017-01-04

Only an estimated 54% of people living with HIV are aware of their status. Despite progress scaling up HIV testing services (HTS), a testing gap remains. Delivery of HTS by lay providers may help close this testing gap, while also increasing uptake and acceptability of HIV testing among key populations and other priority groups. 50 National HIV testing policies were collated from WHO country intelligence databases, contacts and testing program websites. Data regarding lay provider use for HTS was extracted and collated. Our search had no geographical or language restrictions. This data was then compared with reported data from the Global AIDS Response Progress Reporting (GARPR) from July 2015. Forty-two percent of countries permit lay providers to perform HIV testing and 56% permit lay providers to administer pre-and post-test counseling. Comparative analysis with GARPR found that less than half (46%) of reported data from countries were consistent with their corresponding national HIV testing policy. Given the low uptake of lay provider use globally and their proven use in increasing HIV testing, countries should consider revising policies to support lay provider testing using rapid diagnostic tests.

A neural net-based approach to software metrics

NASA Technical Reports Server (NTRS)

Boetticher, G.; Srinivas, Kankanahalli; Eichmann, David A.

1992-01-01

Software metrics provide an effective method for characterizing software. Metrics have traditionally been composed through the definition of an equation. This approach is limited by the fact that all the interrelationships among all the parameters be fully understood. This paper explores an alternative, neural network approach to modeling metrics. Experiments performed on two widely accepted metrics, McCabe and Halstead, indicate that the approach is sound, thus serving as the groundwork for further exploration into the analysis and design of software metrics.

Employers flex their muscles as health care purchasers.

PubMed

Delbanco, Suzanne

2007-08-01

Engaged health care purchasers--both individual and group--can stimulate some good, healthy competition in the health care system, and competition needs to be based on results. To determine results, we need accepted measures of quality and efficiency that make sense. Then, performance on those measures must be disclosed publicly. Only when this information is available to consumers and other purchasers of health care will they be able to make informed choices and reward effective and efficient health care providers.

Spectroscopy of infrared-active phonons in high-temperature superconductors

NASA Technical Reports Server (NTRS)

Litvinchuk, A. P.; Thomsen, C.; Cardona, M.; Borjesson, L.

1995-01-01

For a large variety of superconducting materials both experimental and theoretical lattice dynamical studies have been performed to date. The assignment of the observed infrared- and Raman-active phonon modes to the particular lattice eigenmodes is generally accepted. We will concentrate here upon the analysis of the changes of the infrared-phonon parameters (frequency and linewidth) upon entering the superconducting state which, as will be shown, may provide information on the magnitude of the superconductivity-related gap and its dependence on the superconducting transition temperature Tc.

Data Collection and Administration Procedures for the Job Performance Measurement System

DTIC Science & Technology

1992-10-01

acceptable to the MAJCC4s and would allow data collection to proceed smoothly with effective use of time and resources. Table 2 lists the number of bases...WTPT, but this was not required. Previous exposure to the JPM project was also beneficial, though not required. Finally, to ensure an effective line of...PDCIKR 1. Provide team leadership to facilitate effective operation and the collection of quality data. 2. Serve as the liaison between team and AFHRL

Sensory Profile, Drivers of Liking, and Influence of Information on the Acceptance of Low-Calorie Synbiotic and Probiotic Chocolate Ice Cream.

PubMed

Peres, Juliana; Esmerino, Erick; da Silva, Alessandra Lins; Racowski, Ilana; Bolini, Helena

2018-05-01

The objective of this study was to evaluate the sensory profile and the influence of the information on the acceptance of the symbiotic chocolate ice cream made with sucrose and different sweeteners (aspartame, sucralose, neotame, Stevia with 60%, 85%, 95%, and 97% of rebaudioside A) through analysis of variance (ANOVA), Tukey's test, and partial least of square (PLS) regression. Quantitative descriptive analysis (QDA) was carried out by 18 assessors, who evaluated the samples in relation to the raised descriptors. Additionally, two acceptance tests (blind/informed) were performed with 120 consumers. The samples sweetened with sucralose and rebaudioside 97% presented similar profile to the control sample, thus having a better potential to replace sucrose in chocolate ice cream. The acceptance test carried out with information had higher scores for the attributes appearance, aroma, flavor, texture, and overall impression. The correlation between data from the acceptance tests and QDA showed that the descriptors "low-energy" and "natural sweetener" claims interfered negatively in the drivers of liking of chocolate ice cream. Therefore, we can conclude that some characteristics unnoticed by consumers were highlighted after providing the information about the product's characteristics. This research is important and contributes to the manufacture and development of low-calorie chocolate ice cream with functional properties, guiding, through suitable sensory and statistical tools, the application of stevia and other artificial sweeteners in products with reduction or total absence of sucrose and highlighting the impact of the labeling of these products on consumer perception. © 2018 Institute of Food Technologists®.

Feasibility and acceptability of a decision aid designed for people facing advanced or terminal illness: a pilot randomized trial.

PubMed

Matlock, Dan D; Keech, Tarah A E; McKenzie, Marlene B; Bronsert, Michael R; Nowels, Carolyn T; Kutner, Jean S

2014-02-01

Patients nearing the end of their lives face an array of difficult decisions. This study was designed to assess the feasibility and acceptability of a decision aid (DA) designed for patients facing advanced or terminal illness. We conducted a pilot randomized clinical trial of Health Dialog's Looking Ahead: choices for medical care when you're seriously ill DA (booklet and DVD) applied to patients on a hospital-based palliative care (PC) service. University of Colorado Hospital - December 2009 and May 2010. All adult, English-speaking patients or their decision makers were potentially eligible. Patients were not approached if they were in isolation, did not speak English or if any provider felt that they were not appropriate because of issues such as family conflict or actively dying. All participants received a standard PC consultation. Participants in the intervention arm also received a copy of the DA. Measurements Primary outcomes included decision conflict and knowledge. Participants in the intervention arm also completed an acceptability questionnaire and qualitative exit interviews. Of the 239 patients or decision makers, 51(21%) enrolled in the trial. The DA had no significant effect on decision conflict or knowledge. Exit interviews indicated it was acceptable and empowering, although they wished they had access to the DA earlier. While the DA was acceptable, feasibility was limited by late-life illness challenges. Future trials of this DA should be performed on patients earlier in their illness trajectory and should include additional outcome measures such as self-efficacy and confidence. © 2011 John Wiley & Sons Ltd.

Acceptance-test report for El Toro Library solar heating and cooling demonstration project (SHAC no. 1501)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

A partial acceptance test was conducted on the El Toro Library Solar Energy System, and the detailed results of the various mode acceptance tests are given. All the modes tested function as designed. Collector array efficiencies were calculated at approximately 40%. Chiller COP was estimated at .50, with chiller loop flow rates approximately 85 to 90% of design flow. The acceptance test included visual inspection, preoperational testing and procedure verification, operational mode checkout, and performance testing. (LEW)

Physical assessment techniques performed by Italian registered nurses: a quantitative survey.

PubMed

Cicolini, Giancarlo; Tomietto, Marco; Simonetti, Valentina; Comparcini, Dania; Flacco, Maria Elena; Carvello, Maicol; Manzoli, Lamberto

2015-12-01

The aims of the study were to describe which of the core techniques of the physical assessment are regularly performed by a sample of Italian nurses, and to investigate the potential predictors of a more complete examination. Physical examination is among the essential tasks of nursing professionals, who are requested to perform a correct and complete physical assessment. Cross-sectional survey. The study was performed between August 2013 and January 2014 in 17 Italian regions. A total of 1182 questionnaires were collected. Most participants were females (age range 41-50 years), and worked in Internal Medicine, Intensive Care and Surgical hospital units. Of the 30 core techniques that are currently taught and performed according to the Italian Baccalaureate degree requirements, 20 were routinely performed, 6 were seldom used and 4 were learnt but almost never performed (auscultation of lung, heart and bowel sounds and spine inspection). Graduate and postgraduate nurses, working in Intensive Care Units and Nursing Homes, were more prone than the others to carry out a more complete physical assessment. The skills to perform a physical assessment are suboptimal among this sample of Italian nurses. Health and educational providers should pose more attention and efforts to provide nurses with an acceptable training in physical examination practice. This study describes the specific physical techniques performed by nurses in real practice and provides information on which skills require more attention in nursing educational programmes. © 2015 John Wiley & Sons Ltd.

Manufacture and evaluation of Li/BCX DD cells

NASA Technical Reports Server (NTRS)

Meyer, S.; Takeuchi, E.

1990-01-01

This project is divided into four main tasks: cell manufacture, acceptance, and lot certification of cells, performance testing of cells, and abuse testing of cells. Lithium/bromine chloride in thionyl chloride (Li/BCX) 149 DD cells (PN 3B2085-XA) were built according to the provisions of Electrochem Industries Quality Plan 17096. Acceptance and lot certification testing was performed according to NASA JSC Document EP5-83-025, Revision B. Acceptance testing included open circuit and load voltage check, visual examination, size and weight measurements, and high temperature exposure. Lot certification tests were performed for capacity performance and for performance under conditions of thermal and electrical abuse. These tests included 149 C exposure, capacity discharge, fuse check, high temperature exposure, high rate discharge, short circuit, vibration, and overdischarge testing. A quantity of 200 cells was delivered to Johnson Space Center for life test evaluation. A parametric evaluation of the capacity discharge of Li/BCX DD cells was performed over a variety of temperatures and discharge rates. This testing served to map the performance capability of the cell. Tests were also performed over a variety of electrical and thermal abuse conditions. Abuse tests included short circuit, charging, overdischarge, high temperature exposure, shock, and vibration.

The Psychometric Properties of Classroom Response System Data: A Case Study

NASA Astrophysics Data System (ADS)

Kortemeyer, Gerd

2016-08-01

Classroom response systems (often referred to as "clickers") have slowly gained adoption over the recent decade; however, critics frequently doubt their pedagogical value starting with the validity of the gathered responses: There is concern that students simply "click" random answers. This case study looks at different measures of response reliability, starting from a global look at correlations between formative clicker responses and summative examination performance to how clicker questions are used in context. It was found that clicker performance is a moderate indicator of course performance as a whole, and that while the psychometric properties of clicker items are more erratic than those of examination data, they still have acceptable internal consistency and include items with high discrimination. It was also found that clicker responses and item properties do provide highly meaningful feedback within a lecture context, i.e., when their position and function within lecture sessions are taken into consideration. Within this framework, conceptual questions provide measurably more meaningful feedback than items that require calculations.

Method and system for simulating heat and mass transfer in cooling towers

DOEpatents

Bharathan, Desikan; Hassani, A. Vahab

1997-01-01

The present invention is a system and method for simulating the performance of a cooling tower. More precisely, the simulator of the present invention predicts values related to the heat and mass transfer from a liquid (e.g., water) to a gas (e.g., air) when provided with input data related to a cooling tower design. In particular, the simulator accepts input data regarding: (a) cooling tower site environmental characteristics; (b) cooling tower operational characteristics; and (c) geometric characteristics of the packing used to increase the surface area within the cooling tower upon which the heat and mass transfer interactions occur. In providing such performance predictions, the simulator performs computations related to the physics of heat and mass transfer within the packing. Thus, instead of relying solely on trial and error wherein various packing geometries are tested during construction of the cooling tower, the packing geometries for a proposed cooling tower can be simulated for use in selecting a desired packing geometry for the cooling tower.

Performance on the low charge state laser ion source in BNL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Okamura, M.; Alessi, J.; Beebe, E.

On March 2014, a Laser Ion Source (LIS) was commissioned which delivers high-brightness, low-charge-state heavy ions for the hadron accelerator complex in Brookhaven National Laboratory (BNL). Since then, the LIS has provided many heavy ion species successfully. The low-charge-state (mostly singly charged) beams are injected to the Electron Beam Ion Source (EBIS), where ions are then highly ionized to fit to the following accelerator’s Q/M acceptance, like Au 32+. Recently we upgraded the LIS to be able to provide two different beams into EBIS on a pulse-to-pulse basis. Now the LIS is simultaneously providing beams for both the Relativistic Heavymore » Ion Collider (RHIC) and NASA Space Radiation Laboratory (NSRL).« less

[Emergency contraception in Brazil: facilitators and barriers].

PubMed

Hardy, E; Duarte, G A; Osis, M J; Arce, X E; Possan, M

2001-01-01

A multi-centered qualitative study was conducted in Brazil, Chile, and Mexico to assess the acceptability of emergency contraception both among potential users and possible providers, authorities, and opinion-makers, and to identify (according to participants' perceptions) factors facilitating or hindering the method's use and the most appropriate strategies to disseminate information and provide the method. Data were collected through semi-structured interviews, group interviews, and discussion groups, which were tape-recorded and transcribed. A thematic analysis of this material was conducted. Acceptability of emergency contraception was high among participants, who also felt that there were no barriers towards its acceptance by the population. Participants felt that the method's acceptability would be greater if it were included in reproductive health programs, emphasizing its prescription for emergency situations. Participants highlighted that strategic components in Brazil would be training of providers and inclusion of the method in family planning services.

A Generalized Pivotal Quantity Approach to Analytical Method Validation Based on Total Error.

PubMed

Yang, Harry; Zhang, Jianchun

2015-01-01

The primary purpose of method validation is to demonstrate that the method is fit for its intended use. Traditionally, an analytical method is deemed valid if its performance characteristics such as accuracy and precision are shown to meet prespecified acceptance criteria. However, these acceptance criteria are not directly related to the method's intended purpose, which is usually a gurantee that a high percentage of the test results of future samples will be close to their true values. Alternate "fit for purpose" acceptance criteria based on the concept of total error have been increasingly used. Such criteria allow for assessing method validity, taking into account the relationship between accuracy and precision. Although several statistical test methods have been proposed in literature to test the "fit for purpose" hypothesis, the majority of the methods are not designed to protect the risk of accepting unsuitable methods, thus having the potential to cause uncontrolled consumer's risk. In this paper, we propose a test method based on generalized pivotal quantity inference. Through simulation studies, the performance of the method is compared to five existing approaches. The results show that both the new method and the method based on β-content tolerance interval with a confidence level of 90%, hereafter referred to as the β-content (0.9) method, control Type I error and thus consumer's risk, while the other existing methods do not. It is further demonstrated that the generalized pivotal quantity method is less conservative than the β-content (0.9) method when the analytical methods are biased, whereas it is more conservative when the analytical methods are unbiased. Therefore, selection of either the generalized pivotal quantity or β-content (0.9) method for an analytical method validation depends on the accuracy of the analytical method. It is also shown that the generalized pivotal quantity method has better asymptotic properties than all of the current methods. Analytical methods are often used to ensure safety, efficacy, and quality of medicinal products. According to government regulations and regulatory guidelines, these methods need to be validated through well-designed studies to minimize the risk of accepting unsuitable methods. This article describes a novel statistical test for analytical method validation, which provides better protection for the risk of accepting unsuitable analytical methods. © PDA, Inc. 2015.

Usability and Acceptability of ASSESS MS: Assessment of Motor Dysfunction in Multiple Sclerosis Using Depth-Sensing Computer Vision.

PubMed

Morrison, Cecily; D'Souza, Marcus; Huckvale, Kit; Dorn, Jonas F; Burggraaff, Jessica; Kamm, Christian Philipp; Steinheimer, Saskia Marie; Kontschieder, Peter; Criminisi, Antonio; Uitdehaag, Bernard; Dahlke, Frank; Kappos, Ludwig; Sellen, Abigail

2015-06-24

Sensor-based recordings of human movements are becoming increasingly important for the assessment of motor symptoms in neurological disorders beyond rehabilitative purposes. ASSESS MS is a movement recording and analysis system being developed to automate the classification of motor dysfunction in patients with multiple sclerosis (MS) using depth-sensing computer vision. It aims to provide a more consistent and finer-grained measurement of motor dysfunction than currently possible. To test the usability and acceptability of ASSESS MS with health professionals and patients with MS. A prospective, mixed-methods study was carried out at 3 centers. After a 1-hour training session, a convenience sample of 12 health professionals (6 neurologists and 6 nurses) used ASSESS MS to capture recordings of standardized movements performed by 51 volunteer patients. Metrics for effectiveness, efficiency, and acceptability were defined and used to analyze data captured by ASSESS MS, video recordings of each examination, feedback questionnaires, and follow-up interviews. All health professionals were able to complete recordings using ASSESS MS, achieving high levels of standardization on 3 of 4 metrics (movement performance, lateral positioning, and clear camera view but not distance positioning). Results were unaffected by patients' level of physical or cognitive disability. ASSESS MS was perceived as easy to use by both patients and health professionals with high scores on the Likert-scale questions and positive interview commentary. ASSESS MS was highly acceptable to patients on all dimensions considered, including attitudes to future use, interaction (with health professionals), and overall perceptions of ASSESS MS. Health professionals also accepted ASSESS MS, but with greater ambivalence arising from the need to alter patient interaction styles. There was little variation in results across participating centers, and no differences between neurologists and nurses. In typical clinical settings, ASSESS MS is usable and acceptable to both patients and health professionals, generating data of a quality suitable for clinical analysis. An iterative design process appears to have been successful in accounting for factors that permit ASSESS MS to be used by a range of health professionals in new settings with minimal training. The study shows the potential of shifting ubiquitous sensing technologies from research into the clinic through a design approach that gives appropriate attention to the clinic environment.

Usability and Acceptability of ASSESS MS: Assessment of Motor Dysfunction in Multiple Sclerosis Using Depth-Sensing Computer Vision

PubMed Central

Dorn, Jonas F; Burggraaff, Jessica; Kamm, Christian Philipp; Steinheimer, Saskia Marie; Kontschieder, Peter; Criminisi, Antonio; Uitdehaag, Bernard; Dahlke, Frank; Kappos, Ludwig; Sellen, Abigail

2015-01-01

Background Sensor-based recordings of human movements are becoming increasingly important for the assessment of motor symptoms in neurological disorders beyond rehabilitative purposes. ASSESS MS is a movement recording and analysis system being developed to automate the classification of motor dysfunction in patients with multiple sclerosis (MS) using depth-sensing computer vision. It aims to provide a more consistent and finer-grained measurement of motor dysfunction than currently possible. Objective To test the usability and acceptability of ASSESS MS with health professionals and patients with MS. Methods A prospective, mixed-methods study was carried out at 3 centers. After a 1-hour training session, a convenience sample of 12 health professionals (6 neurologists and 6 nurses) used ASSESS MS to capture recordings of standardized movements performed by 51 volunteer patients. Metrics for effectiveness, efficiency, and acceptability were defined and used to analyze data captured by ASSESS MS, video recordings of each examination, feedback questionnaires, and follow-up interviews. Results All health professionals were able to complete recordings using ASSESS MS, achieving high levels of standardization on 3 of 4 metrics (movement performance, lateral positioning, and clear camera view but not distance positioning). Results were unaffected by patients’ level of physical or cognitive disability. ASSESS MS was perceived as easy to use by both patients and health professionals with high scores on the Likert-scale questions and positive interview commentary. ASSESS MS was highly acceptable to patients on all dimensions considered, including attitudes to future use, interaction (with health professionals), and overall perceptions of ASSESS MS. Health professionals also accepted ASSESS MS, but with greater ambivalence arising from the need to alter patient interaction styles. There was little variation in results across participating centers, and no differences between neurologists and nurses. Conclusions In typical clinical settings, ASSESS MS is usable and acceptable to both patients and health professionals, generating data of a quality suitable for clinical analysis. An iterative design process appears to have been successful in accounting for factors that permit ASSESS MS to be used by a range of health professionals in new settings with minimal training. The study shows the potential of shifting ubiquitous sensing technologies from research into the clinic through a design approach that gives appropriate attention to the clinic environment. PMID:27025782

The Empirically Supported Status of Acceptance and Commitment Therapy: An Update

ERIC Educational Resources Information Center

Smout, Matthew F.; Hayes, Louise; Atkins, Paul W. B.; Klausen, Jessica; Duguid, James E.

2012-01-01

Acceptance and commitment therapy (ACT) is a transdiagnostic cognitive behavioural therapy that predominantly teaches clients acceptance and mindfulness skills, as well as values clarification and enactment skills. Australian treatment guideline providers have been cautious in recognising ACT as empirically supported. This article reviews evidence…

49 CFR 1544.203 - Acceptance and screening of checked baggage.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Acceptance and screening of checked baggage. 1544... SECURITY: AIR CARRIERS AND COMMERCIAL OPERATORS Operations § 1544.203 Acceptance and screening of checked... its authorized aircraft operator representative. (c) Screening of checked baggage. Except as provided...

Automotive Stirling engine development program

NASA Technical Reports Server (NTRS)

Ernst, W.; Richey, A.; Farrell, R.; Riecke, G.; Smith, G.; Howarth, R.; Cronin, M.; Simetkosky, M.; Meacher, J.

1986-01-01

The major accomplishments were the completion of the Basic Stirling Engine (BSE) and the Stirling Engine System (SES) designs on schedule, the approval and acceptance of those designs by NASA, and the initiation of manufacture of BSE components. The performance predictions indicate the Mod II engine design will meet or exceed the original program goals of 30% improvement in fuel economy over a conventional Internal Combustion (IC) powered vehicle, while providing acceptable emissions. This was accomplished while simultaneously reducing Mod II engine weight to a level comparable with IC engine power density, and packaging the Mod II in a 1985 Celebrity with no external sheet metal changes. The projected mileage of the Mod II Celebrity for the combined urban and highway CVS cycle is 40.9 mpg which is a 32% improvement over the IC Celebrity. If additional potential improvements are verified and incorporated in the Mod II, the mileage could increase to 42.7 mpg.

Reconciliation of the cloud computing model with US federal electronic health record regulations

PubMed Central

2011-01-01

Cloud computing refers to subscription-based, fee-for-service utilization of computer hardware and software over the Internet. The model is gaining acceptance for business information technology (IT) applications because it allows capacity and functionality to increase on the fly without major investment in infrastructure, personnel or licensing fees. Large IT investments can be converted to a series of smaller operating expenses. Cloud architectures could potentially be superior to traditional electronic health record (EHR) designs in terms of economy, efficiency and utility. A central issue for EHR developers in the US is that these systems are constrained by federal regulatory legislation and oversight. These laws focus on security and privacy, which are well-recognized challenges for cloud computing systems in general. EHRs built with the cloud computing model can achieve acceptable privacy and security through business associate contracts with cloud providers that specify compliance requirements, performance metrics and liability sharing. PMID:21727204

Evaluations of candidate encapsulation designs and materials for low-cost silicon photovoltaic arrays

NASA Technical Reports Server (NTRS)

Gaines, G. B.; Carmichael, D. C.; Sliemers, F. A.; Brockway, M. C.; Bunk, A. R.; Nance, G. P.

1978-01-01

Three encapsulation designs for silicon photovoltaic arrays based on cells with silk-screened Ag metallization have been evaluated: transparent polymeric coatings over cells laminated between two films or sheets of polymeric materials; cells adhesively bonded to a glass cover with a polymer pottant and a glass or other substrate component. Silicone and acrylic coatings were assessed, together with acrylic sheet, 0.635 mm fiberglass-reinforced polyester sheet, 0.102 mm polycarbonate/acrylic dual-layer film, 0.127 mm fluorocarbon film, soda-lime glass, borosilicate glass, low-iron glass, and several adhesives. The encapsulation materials were characterized by light transmittance measurements, determination of moisture barrier properties and bond strengths, and by the performance of cells before and after encapsulation. Silicon and acrylic coatings provided inadequate protection. Acrylic and fluorocarbon films displayed good weatherability and acceptable optical transmittance. Borosilicate, low-iron and soda-lime-float glasses were found to be acceptable candidate encapsulants for most environments.

DOSE ASSESSMENTS FROM THE DISPOSAL OF LOW ...

EPA Pesticide Factsheets

Modeling the long-term performance of the RCRA-C disposal cell and potential doses to off-site receptors is used to derive maximum radionuclide specific concentrations in the wastes that would enable these wastes to be disposed of safely using the RCRA-C disposal cell technology. Modeling potential exposures to derive these waste acceptance concentrations involves modeling exposures to workers during storage, treatment and disposal of the wastes, as well as exposures to individuals after disposal operations have ceased. Post facility closure exposures can result from the slow expected degradation of the disposal cell over long time periods (one thousand years after disposal) and in advertent human intrusion. Provide a means of determining waste acceptance radionuclide concentrations for disposal of debris from radiological dispersal device incidents as well as low-activity wastes generated in commercial, medical and research activities, potentially serve as the technical basis for guidance on disposal of these materials.

Thin film concentrator panel development

NASA Technical Reports Server (NTRS)

Zimmerman, D. K.

1982-01-01

The development and testing of a rigid panel concept that utilizes a thin film reflective surface for application to a low-cost point-focusing solar concentrator is discussed. It is shown that a thin film reflective surface is acceptable for use on solar concentrators, including 1500 F applications. Additionally, it is shown that a formed steel sheet substrate is a good choice for concentrator panels. The panel has good optical properties, acceptable forming tolerances, environmentally resistant substrate and stiffeners, and adaptability to low to mass production rates. Computer simulations of the concentrator optics were run using the selected reflector panel design. Experimentally determined values for reflector surface specularity and reflectivity along with dimensional data were used in the analysis. The simulations provided intercept factor and net energy into the aperture as a function of aperture size for different surface errors and pointing errors. Point source and Sun source optical tests were also performed.

Estimating annual suspended-sediment loads in the northern and central Appalachian Coal region

USGS Publications Warehouse

Koltun, G.F.

1985-01-01

Multiple-regression equations were developed for estimating the annual suspended-sediment load, for a given year, from small to medium-sized basins in the northern and central parts of the Appalachian coal region. The regression analysis was performed with data for land use, basin characteristics, streamflow, rainfall, and suspended-sediment load for 15 sites in the region. Two variables, the maximum mean-daily discharge occurring within the year and the annual peak discharge, explained much of the variation in the annual suspended-sediment load. Separate equations were developed employing each of these discharge variables. Standard errors for both equations are relatively large, which suggests that future predictions will probably have a low level of precision. This level of precision, however, may be acceptable for certain purposes. It is therefore left to the user to asses whether the level of precision provided by these equations is acceptable for the intended application.

Application of statistical classification methods for predicting the acceptability of well-water quality

NASA Astrophysics Data System (ADS)

Cameron, Enrico; Pilla, Giorgio; Stella, Fabio A.

2018-06-01

The application of statistical classification methods is investigated—in comparison also to spatial interpolation methods—for predicting the acceptability of well-water quality in a situation where an effective quantitative model of the hydrogeological system under consideration cannot be developed. In the example area in northern Italy, in particular, the aquifer is locally affected by saline water and the concentration of chloride is the main indicator of both saltwater occurrence and groundwater quality. The goal is to predict if the chloride concentration in a water well will exceed the allowable concentration so that the water is unfit for the intended use. A statistical classification algorithm achieved the best predictive performances and the results of the study show that statistical classification methods provide further tools for dealing with groundwater quality problems concerning hydrogeological systems that are too difficult to describe analytically or to simulate effectively.

Moving-base simulation evaluation of thrust margins for vertical landing for the NASA YAV-8B Harrier aircraft

NASA Technical Reports Server (NTRS)

Franklin, James A.; Stortz, Michael W.

1993-01-01

A simulation experiment was conducted on Ames Research Center's Vertical Motion Simulator to evaluate the thrust margin for vertical landing required for the YAV-8B Harrier. Two different levels of ground effect were employed, representing the aircraft with or without lift improvement devices installed. In addition, two different inlet temperature profiles were included to cover a wide range of hot gas ingestion. For each ground effect and hot gas ingestion variant, vertical landings were performed at successively heavier weights, with the pilot assessing the acceptability of the operation in each case. Results are presented as a function of hover weight ratio and a metric of the mean ground effect and ingestion that reflect the increase in thrust margin required to provide acceptable control of sink rate during the descent to touchdown with increasing suck down and hot gas ingestion.

The European computer model for optronic system performance prediction (ECOMOS)

NASA Astrophysics Data System (ADS)

Repasi, Endre; Bijl, Piet; Labarre, Luc; Wittenstein, Wolfgang; Bürsing, Helge

2017-05-01

ECOMOS is a multinational effort within the framework of an EDA Project Arrangement. Its aim is to provide a generally accepted and harmonized European computer model for computing nominal Target Acquisition (TA) ranges of optronic imagers operating in the Visible or thermal Infrared (IR). The project involves close co-operation of defence and security industry and public research institutes from France, Germany, Italy, The Netherlands and Sweden. ECOMOS uses and combines well-accepted existing European tools to build up a strong competitive position. This includes two TA models: the analytical TRM4 model and the image-based TOD model. In addition, it uses the atmosphere model MATISSE. In this paper, the central idea of ECOMOS is exposed. The overall software structure and the underlying models are shown and elucidated. The status of the project development is given as well as a short outlook on validation tests and the future potential of simulation for sensor assessment.

Reconciliation of the cloud computing model with US federal electronic health record regulations.

PubMed

Schweitzer, Eugene J

2012-01-01

Cloud computing refers to subscription-based, fee-for-service utilization of computer hardware and software over the Internet. The model is gaining acceptance for business information technology (IT) applications because it allows capacity and functionality to increase on the fly without major investment in infrastructure, personnel or licensing fees. Large IT investments can be converted to a series of smaller operating expenses. Cloud architectures could potentially be superior to traditional electronic health record (EHR) designs in terms of economy, efficiency and utility. A central issue for EHR developers in the US is that these systems are constrained by federal regulatory legislation and oversight. These laws focus on security and privacy, which are well-recognized challenges for cloud computing systems in general. EHRs built with the cloud computing model can achieve acceptable privacy and security through business associate contracts with cloud providers that specify compliance requirements, performance metrics and liability sharing.

The Feasibility and Acceptability of "Arise": An Online Substance Abuse Relapse Prevention Program.

PubMed

Sanchez, Rebecca Polley; Bartel, Chelsea M

2015-04-01

The purpose of this study was to test the feasibility and acceptability of a novel online adolescent substance abuse relapse prevention tool, "Arise" (3C Institute, Cary, NC). The program uses an innovative platform including interactive instructional segments and skill-building games to help adolescents learn and practice coping skills training strategies. We conducted a pilot test with nine adolescents in substance abuse treatment (44 percent female) and a feasibility test with treatment providers (n=8; 50 percent female). Adolescents interacted with the program via a secure Web site for approximately 30 minutes for each of two instructional units. Treatment providers reviewed the same material at their own pace. All participants completed a questionnaire with items assessing usability, acceptability, understanding, and subjective experience of the program. Regarding feasibility, recruitment of this population within the study constraints proved challenging, but participant retention in the trial was high (no attrition). Adolescents and treatment providers completed the program with no reported problems, and overall we were able to collect data as planned. Regarding acceptability, the program received strong ratings from both adolescents and providers, who found the prototype informative, engaging, and appealing. Both groups strongly recommended continuing development. We were able to deliver the intervention as intended, and acceptability ratings were high, demonstrating the feasibility and acceptability of online delivery of engaging interactive interventions. This study contributes to our understanding of how interactive technologies, including games, can be used to modify behavior in substance abuse treatment and other health areas.

Development of Urine Receptacle Assembly for the Crew Exploration Vehicle

NASA Technical Reports Server (NTRS)

Cibuzar, Branelle Rae; Thomas, Evan; Peterson, Laurie; Goforth, Johanna

2008-01-01

The Urine Receptacle Assembly (URA) initially was developed for Apollo as a primary means of urine collection. The aluminum housing with stainless steel honeycomb insert provided all male crewmembers with a non-invasive means of micturating into a urine capturing device and then venting to space. The performance of the URA was a substantial improvement over previous devices but its performance was not well understood. The Crew Exploration Vehicle (CEV) program is exploring the URA as a contingency liquid waste management system for the vehicle. URA improvements are required to meet CEV requirements, including: consumables minimization, flow performance, acceptable hygiene standards, crew comfort, and female crewmember capability. This paper presents the results of a historical review of URA performance during the Apollo program, recent URA performance tests on the reduced gravity aircraft flight under varying flow conditions, and a proposed development plan for the URA to meet CEV needs.

A yoga intervention for music performance anxiety in conservatory students.

PubMed

Stern, Judith R S; Khalsa, Sat Bir S; Hofmann, Stefan G

2012-09-01

Music performance anxiety can adversely affect musicians. There is a need for additional treatment strategies, especially those that might be more acceptable to musicians than existing therapies. This pilot study examined the effectiveness of a 9-week yoga practice on reducing music performance anxiety in undergraduate and graduate music conservatory students, including both vocalists and instrumentalists. The intervention consisted of fourteen 60-minute yoga classes approximately twice a week and a brief daily home practice. Of the 24 students enrolled in the study, 17 attended the post-intervention assessment. Participants who completed the measures at both pre- and post-intervention assessments showed large decreases in music performance anxiety as well as in trait anxiety. Improvements were sustained at 7- to 14-month follow-up. Participants generally provided positive comments about the program and its benefits. This study suggests that yoga is a promising intervention for music performance anxiety in conservatory students and therefore warrants further research.

Qualification testing of secondary sterilizable silver-zinc cells for use in the Jupiter atmospheric entry probe

NASA Technical Reports Server (NTRS)

Manzo, M. A.

1981-01-01

A series of qualification tests were run on the secondary, sterilizable silver oxide - zinc cell developed at the NASA Lewis Research Center to determine if the cell was capable of providing mission power requirements for the Jupiter atmospheric entry probe. The cells were tested for their ability to survive radiation at the levels predicted for the Jovian atmosphere with no loss of performance. Cell performance was evaluated under various temperature and loading conditions, and the cells were tested under various environmental conditions related to launch and to deceleration into the Jovian atmosphere. The cell performed acceptably except under the required loading at low temperatures. The cell was redesigned to improve low-temperature performance and energy density. The modified cells improved performance at all temperatures. Results of testing cells of both the original and modified designs are discussed.

Unavoidable Pressure Ulcers: Development and Testing of the Indiana University Health Pressure Ulcer Prevention Inventory.

PubMed

Pittman, Joyce; Beeson, Terrie; Terry, Colin; Dillon, Jill; Hampton, Charity; Kerley, Denise; Mosier, Judith; Gumiela, Ellen; Tucker, Jessica

2016-01-01

Despite prevention strategies, hospital-acquired pressure ulcers (HAPUs) continue to occur in the acute care setting. The purpose of this study was to develop an operational definition of and an instrument for identifying avoidable/unavoidable HAPUs in the acute care setting. The Indiana University Health Pressure Ulcer Prevention Inventory (PUPI) was developed and psychometric testing was performed. A retrospective pilot study of 31 adult hospitalized patients with an HAPU was conducted using the PUPI. Overall content validity index of 0.99 and individual item content validity index scores (0.9-1.0) demonstrated excellent content validity. Acceptable PUPI criterion validity was demonstrated with no statistically significant differences between wound specialists' and other panel experts' scoring. Construct validity findings were acceptable with no statistically significant differences among avoidable or unavoidable HAPU patients and their Braden Scale total scores. Interrater reliability was acceptable with perfect agreement on the total PUPI score between raters (κ = 1.0; P = .025). Raters were in total agreement 93% (242/260) of the time on all 12 individual PUPI items. No risk factors were found to be significantly associated with unavoidable HAPUs. An operational definition of and an instrument for identifying avoidable/unavoidable HAPUs in the acute care setting were developed and tested. The instrument provides an objective and structured method for identifying avoidable/unavoidable HAPUs. The PUPI provides an additional method that could be used in root-cause analyses and when reporting adverse pressure ulcer events.

Performance evaluation of the use of photovoltaics to power a street light in Lowell

NASA Astrophysics Data System (ADS)

Crowell, Adam B.

Commercial, off-grid photovoltaic (PV) lighting systems present an attractive alternative to traditional outdoor lighting at sites where grid power is unavailable or unreliable. This study presents a comprehensive theoretical site analysis for the installation of standalone PV lighting systems at the Lowell National Historic Park in Lowell, MA. Detailed insolation studies are performed at the target site, resulting in expected daily Watt-hour totals available for battery charging for each month of the year. Illumination simulations are presented, detailing the expected lighting performance of the systems at night. Light levels are compared to those dictated by accepted standards. While it is acknowledged that the target site presents significant challenges to photovoltaics, such as severe shading, final system component specifications are provided, along with programming and positioning recommendations that will yield the best achievable performance.

Replacing the CCSDS Telecommand Protocol with Next Generation Uplink

NASA Technical Reports Server (NTRS)

Kazz, Greg; Burleigh, Scott; Greenberg, Ed

2012-01-01

Better performing Forward Error Correction on the forward link along with adequate power in the data open an uplink operations trade space that enable missions to: Command to greater distances in deep space (increased uplink margin) Increase the size of the payload data (latency may be a factor) Provides space for the security header/trailer of the CCSDS Space Data Link Security Protocol Note: These higher rates could be used for relief of emergency communication margins/rates and not limited to improving top-end rate performance. A higher performance uplink could also reduce the requirements on flight emergency antenna size and/or the performance required from ground stations. Use of a selective repeat ARQ protocol may increase the uplink design requirements but the resultant development is deemed acceptable, due the factor of 4 to 8 potential increase in uplink data rate.

NAND Flash Qualification Guideline

NASA Technical Reports Server (NTRS)

Heidecker, Jason

2012-01-01

Better performing Forward Error Correction on the forward link along with adequate power in the data open an uplink operations trade space that enable missions to: Command to greater distances in deep space (increased uplink margin). Increase the size of the payload data (latency may be a factor). Provides space for the security header/trailer of the CCSDS Space Data Link Security Protocol. Note: These higher rates could be used for relief of emergency communication margins/rates and not limited to improving top-end rate performance. A higher performance uplink could also reduce the requirements on flight emergency antenna size and/or the performance required from ground stations. Use of a selective repeat ARQ protocol may increase the uplink design requirements but the resultant development is deemed acceptable, due the factor of 4 to 8 potential increase in uplink data rate.

A computer analysis of the RF performance of a ground-mounted, air-supported radome

NASA Astrophysics Data System (ADS)

Punnett, M. B.; Joy, E. B.

Several reports and actual operating experience have highlighted the degradation of RF Performance which can occur when SSR or IFF antenna are mounted above primary search antenna within metal space frame or dielectric space frame radomes. These effects are usually attributed to both the high incidence angles and sensitivity of the low gain antennae to sidelobe changes due to scattered energy. Although it has been widely accepted that thin membrane radomes would provide superior performance for this application, there has been little supporting documentation. A plane-wave-spectrum (PWS) computer-based radome analysis was conducted to assess the performance of a specific air-supported radome for the SSR application. In conducting the analysis a mathematical model of a modern SSR antenna was combined with a model of an existing Birdair radome design.

Economic method for helical gear flank surface characterisation

NASA Astrophysics Data System (ADS)

Koulin, G.; Reavie, T.; Frazer, R. C.; Shaw, B. A.

2018-03-01

Typically the quality of a gear pair is assessed based on simplified geometric tolerances which do not always correlate with functional performance. In order to identify and quantify functional performance based parameters, further development of the gear measurement approach is required. Methodology for interpolation of the full active helical gear flank surface, from sparse line measurements, is presented. The method seeks to identify the minimum number of line measurements required to sufficiently characterise an active gear flank. In the form ground gear example presented, a single helix and three profile line measurements was considered to be acceptable. The resulting surfaces can be used to simulate the meshing engagement of a gear pair and therefore provide insight into functional performance based parameters. Therefore the assessment of the quality can be based on the predicted performance in the context of an application.

Quality of CPR: An important effect modifier in cardiac arrest clinical outcomes and intervention effectiveness trials.

PubMed

Yannopoulos, Demetris; Aufderheide, Tom P; Abella, Benjamin S; Duval, Sue; Frascone, Ralph J; Goodloe, Jeffrey M; Mahoney, Brian D; Nadkarni, Vinay M; Halperin, Henry R; O'Connor, Robert; Idris, Ahamed H; Becker, Lance B; Pepe, Paul E

2015-09-01

To determine if the quality of CPR had a significant interaction with the primary study intervention in the NIH PRIMED trial. The public access database from the NIH PRIMED trial was accessed to determine if there was an interaction between quality of CPR performance, intervention, and outcome (survival to hospital discharge with modified Rankin Score (mRS) ≤ 3). Multi-centered prehospital care systems across North America. Of 8719 adult patients enrolled, CPR quality was electronically recorded for compression rate, depth, and fraction in 6199 (71.1%), 3750 (43.0%) and 6204 (71.2%) subjects, respectively. "Acceptable" quality CPR was defined prospectively as simultaneous provision of a compression rate of 100/min (± 20%), depth of 5 cm (± 20%) and fraction of > 50%. Significant interaction was considered as p < 0.05. Standard CPR with an activated versus sham (inactivated) ITD. Overall, 848 and 827 patients, respectively, in the active and sham-ITD groups had "acceptable" CPR quality performed (n = 1675). There was a significant interaction between the active and sham-ITD and compression rate, depth and fraction as well as their combinations. The strongest interaction was seen with all three parameters combined (unadjusted and adjusted interaction p-value, < 0.001). For all presenting rhythms, when "acceptable" quality of CPR was performed, use of an active-ITD increased survival to hospital discharge with mRS ≤ 3 compared to sham (61/848 [7.2%] versus 34/827 [4.1%], respectively; p = 0.006). The opposite was true for patients that did not receive "acceptable" quality of CPR. In those patients, use of an active - ITD led to significantly worse survival to hospital discharge with mRS ≤ 3 compared to sham (34/1012 [3.4%] versus 62/1061 [5.8%], p = 0.007). There was a statistically significant interaction between the quality of CPR provided, intervention, and survival to hospital discharge with mRS ≤ 3 in the NIH PRIMED trial. Quality of CPR delivered can be an underestimated effect modifier in CPR clinical trials. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

An assessment of workplace programmes designed to control inhalation risks using respiratory protective equipment.

PubMed

Bell, Nikki; Vaughan, Nicholas P; Morris, Len; Griffin, Peter

2012-04-01

Few studies have assessed respiratory protective equipment (RPE) failures at the organizational level despite evidence to suggest that compliance with good practice may be low. The aim of this study was to develop an understanding of what current RPE programmes look like across industry and how this compares with good practice. Twenty cross-industry site visits were conducted with companies that had RPE programmes in place. Visits involved management interviews to explore current RPE systems and procedures and the decision making underpinning these. Observations of RPE operatives were included followed by short interviews to discuss the behaviours observed. Post-site assessments jointly undertaken by an RPE scientist and psychologist produced ratings for each site on six critical aspects of RPE programmes (knowledge/awareness, selection, use, training/information, supervision, and storage/cleaning/maintenance). Overall ratings for theoretical competence (i.e. management knowledge of RPE) and practical control (i.e. actual RPE practice on the shop floor) were also given. Qualitative analysis was performed on all interview data. The performance of RPE programmes varied across industry. Fewer than half the companies visited were considered to have an acceptable level of theoretical competence and practical control. Four distinct groups emerged from the 20 sites studied, ranging from Learners (low theoretical competence and practical control--four sites), Developers (acceptable theoretical competence and low practical control--five sites), and Fortuitous (low theoretical competence and acceptable practical control--two sites), to Proficient (acceptable theoretical competence and practical control--nine sites). None of the companies visited were achieving optimal control through the use of RPE. Widespread inadequacies were found with programme implementation, particularly training, supervision, and maintenance. Our taxonomy based on the four groups (Learners, Developers, Fortuitous, and Proficient) provided a useful expert-informed tool for explaining the variation in performance of RPE programmes across industry. Although further research and development are required, this taxonomy offers a useful starting point for the development of practical tools that may assist managers in making the much-needed improvements to all facets of programme implementation, particularly training, supervision, and maintenance.

[How did health personnel perceive supervision of obstetric institutions?].

PubMed

Arianson, Helga; Elvbakken, Kari Tove; Malterud, Kirsti

2008-05-15

Through audits, the Norwegian Board of Health supervises and ensures that health institutions adhere to rules and regulations that apply to them. Conduct of such supervision should be predictable and the basis for decisions should be documented and challengeable. Those in charge of the supervision must have the necessary professional competence and be able to integrate and understand the collected information so they can draw the right conclusions. The audit team should demonstrate consideration and respect to those they meet during audits. We therefore wanted to study the experience of being audited among health care providers and leaders of institutions and subsequent adjustments after the audit. We used a questionnaire to evaluate the national audit of 26 (of 60 totally) Norwegian obstetric institutions in 2004. A questionnaire was sent to leaders and health care providers in all institutions that had been inspected (208 persons). Data from semi-structured interviews were used to validate and explore the quantitative findings. 89% responded to the questionnaire. The supervision was well received by leaders and health care providers at the obstetric institutions. The respondents confirmed that the audit team's approach and conduct in principle adhered to the rules within the examined domains. The conclusions presented by the audit teams were accepted as correct by most of the respondents. A large number of adjustments were reported after the audits. We conclude that auditing can lead to improvements and that the described programme probably contributed to improving obstetric services in Norway. The audit team's conduct seems to have an effect on acceptance of the supervision. The performance of the teams may have an impact of the acceptance of auditing, but not on reporting of the adjustments carried out.

Semiconductor Materials for High Frequency Solid State Sources.

DTIC Science & Technology

1985-01-18

saturation on near and submicron-scale device performance. The motivation for this is as follows: Presently, individual semiconductors are accepted or...basis of all FET scaling procedures; and is a major motivating factor for going to submicron structures. This scaling was tested with the 4 following...performance. The motivation for this is as follows: Presently, individual semiconductors are accepted or rejected as candidate device materials based, in

A study on the optimum fast neutron flux for boron neutron capture therapy of deep-seated tumors.

PubMed

Rasouli, Fatemeh S; Masoudi, S Farhad

2015-02-01

High-energy neutrons, named fast neutrons which have a number of undesirable biological effects on tissue, are a challenging problem in beam designing for Boron Neutron Capture Therapy, BNCT. In spite of this fact, there is not a widely accepted criterion to guide the beam designer to determine the appropriate contribution of fast neutrons in the spectrum. Although a number of researchers have proposed a target value for the ratio of fast neutron flux to epithermal neutron flux, it can be shown that this criterion may not provide the optimum treatment condition. This simulation study deals with the determination of the optimum contribution of fast neutron flux in the beam for BNCT of deep-seated tumors. Since the dose due to these high-energy neutrons damages shallow tissues, delivered dose to skin is considered as a measure for determining the acceptability of the designed beam. To serve this purpose, various beam shaping assemblies that result in different contribution of fast neutron flux are designed. The performances of the neutron beams corresponding to such configurations are assessed in a simulated head phantom. It is shown that the previously used criterion, which suggests a limit value for the contribution of fast neutrons in beam, does not necessarily provide the optimum condition. Accordingly, it is important to specify other complementary limits considering the energy of fast neutrons. By analyzing various neutron spectra, two limits on fast neutron flux are proposed and their validity is investigated. The results show that considering these limits together with the widely accepted IAEA criteria makes it possible to have a more realistic assessment of sufficiency of the designed beam. Satisfying these criteria not only leads to reduction of delivered dose to skin, but also increases the advantage depth in tissue and delivered dose to tumor during the treatment time. The Monte Carlo Code, MCNP-X, is used to perform these simulations. Copyright © 2014 Elsevier Ltd. All rights reserved.

An ambient assisted living approach in designing domiciliary services combined with innovative technologies for patients with Alzheimer's disease: a case study.

PubMed

Cavallo, Filippo; Aquilano, Michela; Arvati, Marco

2015-02-01

Alzheimer's disease (AD) is one of the most disabling diseases to affect large numbers of elderly people worldwide. Because of the characteristics of this disease, patients with AD require daily assistance from service providers both in nursing homes and at home. Domiciliary assistance has been demonstrated to be cost effective and efficient in the first phase of the disease, helping to slow down the course of the illness, improve the quality of life and care, and extend independence for patients and caregivers. In this context, the aim of this work is to demonstrate the technical effectiveness and acceptability of an innovative domiciliary smart sensor system for providing domiciliary assistance to patients with AD which has been developed with an Ambient Assisted Living (AAL) approach. The design, development, testing, and evaluation of the innovative technological solution were performed by a multidisciplinary team. In all, 15 sociomedical operators and 14 patients with AD were directly involved in defining the end-users' needs and requirements, identifying design principles with acceptability and usability features and evaluating the technological solutions before and after the real experimentation. A modular technological system was produced to help caregivers continuously monitor the health status, safety, and daily activities of patients with AD. During the experimentation, the acceptability, utility, usability, and efficacy of this system were evaluated as quite positive. The experience described in this article demonstrated that AAL technologies are feasible and effective nowadays and can be actively used in assisting patients with AD in their homes. The extensive involvement of caregivers in the experimentation allowed to assess that there is, through the use of the technological system, a proven improvement in care performance and efficiency of care provision by both formal and informal caregivers and consequently an increase in the quality of life of patients, their relatives, and their caregivers. © The Author(s) 2014.

Prediction of the Maximum Number of Repetitions and Repetitions in Reserve From Barbell Velocity.

PubMed

García-Ramos, Amador; Torrejón, Alejandro; Feriche, Belén; Morales-Artacho, Antonio J; Pérez-Castilla, Alejandro; Padial, Paulino; Haff, Guy Gregory

2018-03-01

To provide 2 general equations to estimate the maximum possible number of repetitions (XRM) from the mean velocity (MV) of the barbell and the MV associated with a given number of repetitions in reserve, as well as to determine the between-sessions reliability of the MV associated with each XRM. After determination of the bench-press 1-repetition maximum (1RM; 1.15 ± 0.21 kg/kg body mass), 21 men (age 23.0 ± 2.7 y, body mass 72.7 ± 8.3 kg, body height 1.77 ± 0.07 m) completed 4 sets of as many repetitions as possible against relative loads of 60%1RM, 70%1RM, 80%1RM, and 90%1RM over 2 separate sessions. The different loads were tested in a randomized order with 10 min of rest between them. All repetitions were performed at the maximum intended velocity. Both the general equation to predict the XRM from the fastest MV of the set (CV = 15.8-18.5%) and the general equation to predict MV associated with a given number of repetitions in reserve (CV = 14.6-28.8%) failed to provide data with acceptable between-subjects variability. However, a strong relationship (median r 2  = .984) and acceptable reliability (CV < 10% and ICC > .85) were observed between the fastest MV of the set and the XRM when considering individual data. These results indicate that generalized group equations are not acceptable methods for estimating the XRM-MV relationship or the number of repetitions in reserve. When attempting to estimate the XRM-MV relationship, one must use individualized relationships to objectively estimate the exact number of repetitions that can be performed in a training set.

Development of Methods for Cross-Sectional HIV Incidence Estimation in a Large, Community Randomized Trial

PubMed Central

Donnell, Deborah; Komárek, Arnošt; Omelka, Marek; Mullis, Caroline E.; Szekeres, Greg; Piwowar-Manning, Estelle; Fiamma, Agnes; Gray, Ronald H.; Lutalo, Tom; Morrison, Charles S.; Salata, Robert A.; Chipato, Tsungai; Celum, Connie; Kahle, Erin M.; Taha, Taha E.; Kumwenda, Newton I.; Karim, Quarraisha Abdool; Naranbhai, Vivek; Lingappa, Jairam R.; Sweat, Michael D.; Coates, Thomas; Eshleman, Susan H.

2013-01-01

Background Accurate methods of HIV incidence determination are critically needed to monitor the epidemic and determine the population level impact of prevention trials. One such trial, Project Accept, a Phase III, community-randomized trial, evaluated the impact of enhanced, community-based voluntary counseling and testing on population-level HIV incidence. The primary endpoint of the trial was based on a single, cross-sectional, post-intervention HIV incidence assessment. Methods and Findings Test performance of HIV incidence determination was evaluated for 403 multi-assay algorithms [MAAs] that included the BED capture immunoassay [BED-CEIA] alone, an avidity assay alone, and combinations of these assays at different cutoff values with and without CD4 and viral load testing on samples from seven African cohorts (5,325 samples from 3,436 individuals with known duration of HIV infection [1 month to >10 years]). The mean window period (average time individuals appear positive for a given algorithm) and performance in estimating an incidence estimate (in terms of bias and variance) of these MAAs were evaluated in three simulated epidemic scenarios (stable, emerging and waning). The power of different test methods to detect a 35% reduction in incidence in the matched communities of Project Accept was also assessed. A MAA was identified that included BED-CEIA, the avidity assay, CD4 cell count, and viral load that had a window period of 259 days, accurately estimated HIV incidence in all three epidemic settings and provided sufficient power to detect an intervention effect in Project Accept. Conclusions In a Southern African setting, HIV incidence estimates and intervention effects can be accurately estimated from cross-sectional surveys using a MAA. The improved accuracy in cross-sectional incidence testing that a MAA provides is a powerful tool for HIV surveillance and program evaluation. PMID:24236054

Trust, confidentiality, and the acceptability of sharing HIV-related patient data: lessons learned from a mixed methods study about Health Information Exchanges.

PubMed

Maiorana, Andre; Steward, Wayne T; Koester, Kimberly A; Pearson, Charles; Shade, Starley B; Chakravarty, Deepalika; Myers, Janet J

2012-04-19

Concerns about the confidentiality of personal health information have been identified as a potential obstacle to implementation of Health Information Exchanges (HIEs). Considering the stigma and confidentiality issues historically associated with human immunodeficiency virus (HIV) disease, we examine how trust-in technology, processes, and people-influenced the acceptability of data sharing among stakeholders prior to implementation of six HIEs intended to improve HIV care in parts of the United States. Our analyses identify the kinds of concerns expressed by stakeholders about electronic data sharing and focus on the factors that ultimately facilitated acceptability of the new exchanges. We conducted 549 surveys with patients and 66 semi-structured interviews with providers and other stakeholders prior to implementation of the HIEs to assess concerns about confidentiality in the electronic sharing of patient data. The patient quantitative data were analyzed using SAS 9.2 to yield sample descriptive statistics. The analysis of the qualitative interviews with providers and other stakeholders followed an open-coding process, and convergent and divergent perspectives emerging from those data were examined within and across the HIEs. We found widespread acceptability for electronic sharing of HIV-related patient data through HIEs. This acceptability appeared to be driven by growing comfort with information technologies, confidence in the security protocols utilized to protect data, trust in the providers and institutions who use the technologies, belief in the benefits to the patients, and awareness that electronic exchange represents an enhancement of data sharing already taking place by other means. HIE acceptability depended both on preexisting trust among patients, providers, and institutions and on building consensus and trust in the HIEs as part of preparation for implementation. The process of HIE development also resulted in forging shared vision among institutions. Patients and providers are willing to accept the electronic sharing of HIV patient data to improve care for a disease historically seen as highly stigmatized. Acceptability depends on the effort expended to understand and address potential concerns related to data sharing and confidentiality, and on the trust established among stakeholders in terms of the nature of the systems and how they will be used.

Open | SpeedShop: An Open Source Infrastructure for Parallel Performance Analysis

DOE PAGES

Schulz, Martin; Galarowicz, Jim; Maghrak, Don; ...

2008-01-01

Over the last decades a large number of performance tools has been developed to analyze and optimize high performance applications. Their acceptance by end users, however, has been slow: each tool alone is often limited in scope and comes with widely varying interfaces and workflow constraints, requiring different changes in the often complex build and execution infrastructure of the target application. We started the Open | SpeedShop project about 3 years ago to overcome these limitations and provide efficient, easy to apply, and integrated performance analysis for parallel systems. Open | SpeedShop has two different faces: it provides an interoperable tool set covering themore » most common analysis steps as well as a comprehensive plugin infrastructure for building new tools. In both cases, the tools can be deployed to large scale parallel applications using DPCL/Dyninst for distributed binary instrumentation. Further, all tools developed within or on top of Open | SpeedShop are accessible through multiple fully equivalent interfaces including an easy-to-use GUI as well as an interactive command line interface reducing the usage threshold for those tools.« less

Effective Clinical Supervision in Substance Use Disorder Treatment Programs and Counselor Job Performance.

PubMed

Rothrauff-Laschober, Tanja C; Eby, Lillian Turner de Tormes; Sauer, Julia B

2013-01-01

When mental health counselors have limited and/or inadequate training in substance use disorders (SUDs), effective clinical supervision (ECS) may advance their professional development. The purpose of the current study was to investigate whether ECS is related to the job performance of SUD counselors. Data were obtained in person via paper-and-pencil surveys from 392 matched SUD counselor-clinical supervisor dyads working in 27 SUD treatment organizations across the United States. ECS was rated by counselors and measured with five multi-item scales (i.e., sponsoring counselors' careers, providing challenging assignments, role modeling, accepting/confirming counselors' competence, overall supervisor task proficiency). Clinical supervisors rated counselors' job performance, which was measured with two multi-item scales (i.e., task performance, performance within supervisory relationship). Using mixed-effects models, we found that most aspects of ECS are related to SUD counselor job performance. Thus, ECS may indeed enhance counselors' task performance and performance within the supervisory relationship, and, as a consequence, offset limited formal SUD training.

Effective Clinical Supervision in Substance Use Disorder Treatment Programs and Counselor Job Performance

PubMed Central

2013-01-01

When mental health counselors have limited and/or inadequate training in substance use disorders (SUDs), effective clinical supervision (ECS) may advance their professional development. The purpose of the current study was to investigate whether ECS is related to the job performance of SUD counselors. Data were obtained in person via paper-and-pencil surveys from 392 matched SUD counselor-clinical supervisor dyads working in 27 SUD treatment organizations across the United States. ECS was rated by counselors and measured with five multi-item scales (i.e., sponsoring counselors’ careers, providing challenging assignments, role modeling, accepting/confirming counselors’ competence, overall supervisor task proficiency). Clinical supervisors rated counselors’ job performance, which was measured with two multi-item scales (i.e., task performance, performance within supervisory relationship). Using mixed-effects models, we found that most aspects of ECS are related to SUD counselor job performance. Thus, ECS may indeed enhance counselors’ task performance and performance within the supervisory relationship, and, as a consequence, offset limited formal SUD training. PMID:25061265

'We didn't have to dance around it': opt-out HIV testing among homeless and marginalised patients.

PubMed

Leidel, Stacy; Leslie, Gavin; Boldy, Duncan; Davies, Andrew; Girdler, Sonya

2017-07-01

This study explored opt-out HIV testing in an Australian general practice. The aims were to: (1) determine the effect of the opt-out approach on the number of HIV tests performed; and (2) explore the acceptability of opt-out HIV testing from the healthcare providers' perspective. A prospective mixed-methods study of opt-out HIV testing over a 2-year period (March 2014-March 2016) was conducted. Implementation was based on a theoretical framework that was developed specifically for this study. The setting was Homeless Healthcare, a health service in Perth, Western Australia. The number of HIV tests conducted during the control year (usual practice) was compared with the intervention year (opt-out testing). After the intervention, the healthcare providers (n=8) were interviewed about their experiences with opt-out HIV testing. Directed content analysis was used to explore the qualitative data. HIV testing rates were low during both the control year and the intervention year (315 HIV tests (12% of the patient cohort) and 344 HIV tests (10%) respectively). Opt-out HIV testing was feasible and acceptable to the participating healthcare providers. Other health services could consider opt-out HIV testing for their patients to identify people with undiagnosed infections and sustain Australia's low HIV prevalence.

Generic substitution of antiretrovirals: patients' and health care providers' opinions.

PubMed

Kieran, Jennifer A; O'Reilly, Eimear; O'Dea, Siobhan; Bergin, Colm; O'Leary, Aisling

2017-10-01

There is interest in introducing generic antiretroviral drugs (ARVs) into high-income countries in order to maximise efficiency in health care budgets. Studies examining patients' and providers' knowledge and attitudes to generic substitution in HIV are few. This was a cross-sectional, observational study with a convenience sample of adult HIV-infected patients and health care providers (HCPs). Data on demographics, knowledge of generic medicine and facilitators of generic substitution were collected. Descriptive and univariate analysis was performed using SPSS V.23™. Questionnaires were completed by 66 patients. Seventy-one per cent would have no concerns with the introduction of generic ARVs. An increase in frequency of administration (61%) or pill burden (53%) would make patients less likely to accept generic ARVs. There were 30 respondents to the HCP survey. Concerns included the supply chain of generics, loss of fixed dose combinations, adherence and use of older medications. An increase in dosing frequency (76%) or an increase in pill burden (50%) would make HCPs less likely to prescribe a generic ARV. The main perceived advantage was financial. Generic substitution of ARVs would be acceptable to the majority of patients and HCPs. Reinvesting savings back into HIV services would facilitate the success of such a programme.

Assessment of the Vapor Phase Catalytic Ammonia Removal (VPCAR) Technology at the MSFC ECLS Test Facility

NASA Technical Reports Server (NTRS)

Tomes, Kristin; Long, David; Carter, Layne; Flynn, Michael

2007-01-01

The Vapor Phase Catalytic Ammonia. Removal (VPCAR) technology has been previously discussed as a viable option for. the Exploration Water Recovery System. This technology integrates a phase change process with catalytic oxidation in the vapor phase to produce potable water from exploration mission wastewaters. A developmental prototype VPCAR was designed, built and tested under funding provided by a National Research. Announcement (NRA) project. The core technology, a Wiped Film Rotating Device (WFRD) was provided by Water Reuse Technologies under the NRA, whereas Hamilton Sundstrand Space Systems International performed the hardware integration and acceptance test. of the system. Personnel at the-Ames Research Center performed initial systems test of the VPCAR using ersatz solutions. To assess the viability of this hardware for Exploration. Life Support (ELS) applications, the hardware has been modified and tested at the MSFC ECLS Test facility. This paper summarizes the hardware modifications and test results and provides an assessment of this technology for the ELS application.

The Use of Acceptance to Promote Positive Change by Decreasing Shame and Guilt: A Practice Exemplar.

PubMed

Meltzer, Mary-Ellen

2015-01-01

The use of acceptance by mental health clinicians in the clinical setting is an effective method for providing a safe environment for clients to make positive changes. Acceptance means that mental health clinicians are non-judgmental and acknowledge the clients' situations as they are. When actively used by clinicians, acceptance decreases clients' anxiety and the intensity of their feelings of guilt and shame. Clients are then able to begin to accept themselves as they are. The purpose of this article is to discuss the ways in which mental health clinicians promote clients' acceptance of themselves using the tools of acceptance and commitment therapy and dialectical behavioral therapy.

Outcomes Analysis of Chief Cosmetic Clinic Over 13 Years.

PubMed

Walker, Nicholas J; Crantford, John C; Rudolph, Megan A; David, Lisa R

2018-06-01

Adequate resident training in aesthetic surgery has become increasingly important with rising demand. Chief resident aesthetic clinics allow hands on experience with an appropriate amount of autonomy. The purpose of this study was to compare resident cosmetic clinic outcomes to those reported in the literature. Furthermore, we sought to assess how effective these clinics can be in preparing residents in performing common aesthetic surgery procedures. A retrospective chart review of 326 patients and 714 aesthetic procedures in our chief cosmetic clinic over a 13-year period was performed, and complication and revision rates were recorded. In addition, an electronic survey was sent to 26 prior chief residents regarding their experience and impressions of the chief resident aesthetic clinic. A total of 713 procedures were performed on 326 patients. Patient ages ranged from 5 to 75 years old (mean, 40.8 years old) with a mean follow-up of 76.2 days. On average, there were 56 procedures performed per year. Of the 714 total procedures performed, there were 136 minor procedures and 578 major procedures. Of the 136 minor procedures, there were no complications and there was 1 revision of a cosmetic injection. Of the 578 major procedures, the overall complication rate was 6.1% and the revision rate was 12.8%. Complication and revision rates for each individual surgery were further analyzed and compared with the literature. The complication rates for these procedures fell within the reference ranges reported. In regards to the chief resident survey, there was a 77% response rate. All respondents reported that the chief resident clinic positively affected their residency education and future practice. Ninety percent of respondents felt "very comfortable" performing facelifts, body contouring, and aesthetic breast surgery. No respondents completed a subsequent cosmetic fellowship, and 60% stated that their positive experience in chief clinic contributed to their decision not to pursue a cosmetic fellowship. Chief resident clinics can provide results with acceptable complication and revision rates that fall within the acceptable ranges in the literature. In addition, it provides a valuable experience that leaves residents with high comfort levels in performing key procedures in aesthetic surgery.

Effectiveness and acceptance of web-based learning compared to traditional face-to-face learning for performance nutrition education.

PubMed

Margolis, Lee M; Grediagin, Ann; Koenig, Chad; Sanders, LesLee F

2009-10-01

The objective of this study was to assess the effectiveness and acceptance of Web-based (WB) versus face-to-face (FF) lecturing. There were 48 soldiers stationed at Fort Bragg, NC who completed the study, participating in either a Web-based or face-to-face lecture on nutrition for performance. The lecture was 30 minutes long. Participants completed a prequiz and survey before the lecture and a postquiz and survey at its conclusion. Results showed there was no difference in the effectiveness of the two mediums on the basis of postquiz scores (Web-based group = 75.68; face-to-face group = 73.27; p = 0.436). Change in scores from pre to post also showed no difference between the two groups (p = 0.375). Assessing the acceptance of the two teaching mediums, there was no significant difference reported, except for the instructor's ability to answer questions (p = 0.05). The conclusion of this study is that Web-based learning can be an effective and acceptable tool for registered dietitians to educate soldiers on nutrition for performance.

LGBT Youth and Family Acceptance

PubMed Central

Katz-Wise, Sabra L.; Rosario, Margaret; Tsappis, Michael

2016-01-01

Summary In this article, we address theories of attachment and parental acceptance and rejection, and their implications for lesbian, gay, bisexual, and transgender (LGBT) youths’ identity and health. We also provide two clinical cases to illustrate the process of family acceptance of a transgender youth and a gender nonconforming youth who was neither a sexual minority nor transgender. Clinical implications of family acceptance and rejection of LGBT youth are discussed. PMID:27865331

Project W-314 specific test and evaluation plan for transfer line SN-633 (241-AX-B to 241-AY-02A)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hays, W.H.

1998-03-20

The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made by the addition of the SN-633 transfer line by the W-314 Project. The STEP develops the outline for test procedures that verify the system`s performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation Plan (TEP). This STEP encompasses all testing activities required to demonstrate compliance to the project design criteria as it relates to the addition of transfer line SN-633. The Project Design Specificationsmore » (PDS) identify the specific testing activities required for the Project. Testing includes Validations and Verifications (e.g., Commercial Grade Item Dedication activities), Factory Acceptance Tests (FATs), installation tests and inspections, Construction Acceptance Tests (CATs), Acceptance Test Procedures (ATPs), Pre-Operational Test Procedures (POTPs), and Operational Test Procedures (OTPs). It should be noted that POTPs are not required for testing of the transfer line addition. The STEP will be utilized in conjunction with the TEP for verification and validation.« less

Photometric Characterization of the Reductive Amination Scope of the Imine Reductases from Streptomyces tsukubaensis and Streptomyces ipomoeae.

PubMed

Matzel, Philipp; Krautschick, Lukas; Höhne, Matthias

2017-10-18

Imine reductases (IREDs) have emerged as promising enzymes for the asymmetric synthesis of secondary and tertiary amines starting from carbonyl substrates. Screening the substrate specificity of the reductive amination reaction is usually performed by time-consuming GC analytics. We found two highly active IREDs in our enzyme collection, IR-20 from Streptomyces tsukubaensis and IR-Sip from Streptomyces ipomoeae, that allowed a comprehensive substrate screening with a photometric NADPH assay. We screened 39 carbonyl substrates combined with 17 amines as nucleophiles. Activity data from 663 combinations provided a clear picture about substrate specificity and capabilities in the reductive amination of these enzymes. Besides aliphatic aldehydes, the IREDs accepted various cyclic (C 4 -C 8 ) and acyclic ketones, preferentially with methylamine. IR-Sip also accepted a range of primary and secondary amines as nucleophiles. In biocatalytic reactions, IR-Sip converted (R)-3-methylcyclohexanone with dimethylamine or pyrrolidine with high diastereoselectivity (>94-96 % de). The nucleophile acceptor spectrum depended on the carbonyl substrate employed. The conversion of well-accepted substrates could also be detected if crude lysates were employed as the enzyme source. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Determinants of human papillomavirus vaccine acceptability in Latin America and the Caribbean.

PubMed

Winkler, Jennifer L; Wittet, Scott; Bartolini, Rosario M; Creed-Kanashiro, Hilary M; Lazcano-Ponce, Eduardo; Lewis-Bell, Karen; Lewis, Merle J; Penny, Mary E

2008-08-19

Prophylactic human papillomavirus (HPV) vaccines provide promise as a key component of future cervical cancer prevention programs in the Latin America and the Caribbean region. The successful introduction and acceptance of these vaccines will depend on a range of factors including awareness of cervical cancer as a problem, affordability of the vaccine, political will, competition with other vaccines, feasibility of vaccine delivery and acceptability of the vaccine among the range of groups who will influence uptake. While existing data about acceptability from Latin America and the Caribbean is scarce, it is clear that health policymakers, providers and the general public lack knowledge about HPV and cervical cancer. Furthermore, they would value more local epidemiologic data related to cervical cancer. Price is currently a major barrier to vaccine acceptability and a priority for advocacy. More research is required in Latin America and the Caribbean to determine what messages and strategies will work in these communities.

Acceptance of an assistive robot in older adults: a mixed-method study of human-robot interaction over a 1-month period in the Living Lab setting.

PubMed

Wu, Ya-Huei; Wrobel, Jérémy; Cornuet, Mélanie; Kerhervé, Hélène; Damnée, Souad; Rigaud, Anne-Sophie

2014-01-01

There is growing interest in investigating acceptance of robots, which are increasingly being proposed as one form of assistive technology to support older adults, maintain their independence, and enhance their well-being. In the present study, we aimed to observe robot-acceptance in older adults, particularly subsequent to a 1-month direct experience with a robot. Six older adults with mild cognitive impairment (MCI) and five cognitively intact healthy (CIH) older adults were recruited. Participants interacted with an assistive robot in the Living Lab once a week for 4 weeks. After being shown how to use the robot, participants performed tasks to simulate robot use in everyday life. Mixed methods, comprising a robot-acceptance questionnaire, semistructured interviews, usability-performance measures, and a focus group, were used. Both CIH and MCI subjects were able to learn how to use the robot. However, MCI subjects needed more time to perform tasks after a 1-week period of not using the robot. Both groups rated similarly on the robot-acceptance questionnaire. They showed low intention to use the robot, as well as negative attitudes toward and negative images of this device. They did not perceive it as useful in their daily life. However, they found it easy to use, amusing, and not threatening. In addition, social influence was perceived as powerful on robot adoption. Direct experience with the robot did not change the way the participants rated robots in their acceptance questionnaire. We identified several barriers to robot-acceptance, including older adults' uneasiness with technology, feeling of stigmatization, and ethical/societal issues associated with robot use. It is important to destigmatize images of assistive robots to facilitate their acceptance. Universal design aiming to increase the market for and production of products that are usable by everyone (to the greatest extent possible) might help to destigmatize assistive devices.

Acceptance of an assistive robot in older adults: a mixed-method study of human–robot interaction over a 1-month period in the Living Lab setting

PubMed Central

Wu, Ya-Huei; Wrobel, Jérémy; Cornuet, Mélanie; Kerhervé, Hélène; Damnée, Souad; Rigaud, Anne-Sophie

2014-01-01

Background There is growing interest in investigating acceptance of robots, which are increasingly being proposed as one form of assistive technology to support older adults, maintain their independence, and enhance their well-being. In the present study, we aimed to observe robot-acceptance in older adults, particularly subsequent to a 1-month direct experience with a robot. Subjects and methods Six older adults with mild cognitive impairment (MCI) and five cognitively intact healthy (CIH) older adults were recruited. Participants interacted with an assistive robot in the Living Lab once a week for 4 weeks. After being shown how to use the robot, participants performed tasks to simulate robot use in everyday life. Mixed methods, comprising a robot-acceptance questionnaire, semistructured interviews, usability-performance measures, and a focus group, were used. Results Both CIH and MCI subjects were able to learn how to use the robot. However, MCI subjects needed more time to perform tasks after a 1-week period of not using the robot. Both groups rated similarly on the robot-acceptance questionnaire. They showed low intention to use the robot, as well as negative attitudes toward and negative images of this device. They did not perceive it as useful in their daily life. However, they found it easy to use, amusing, and not threatening. In addition, social influence was perceived as powerful on robot adoption. Direct experience with the robot did not change the way the participants rated robots in their acceptance questionnaire. We identified several barriers to robot-acceptance, including older adults’ uneasiness with technology, feeling of stigmatization, and ethical/societal issues associated with robot use. Conclusion It is important to destigmatize images of assistive robots to facilitate their acceptance. Universal design aiming to increase the market for and production of products that are usable by everyone (to the greatest extent possible) might help to destigmatize assistive devices. PMID:24855349