Fundamentals of Sports Analytics.

PubMed

Wasserman, Erin B; Herzog, Mackenzie M; Collins, Christy L; Morris, Sarah N; Marshall, Stephen W

2018-07-01

Recently, the importance of statistics and analytics in sports has increased. This review describes measures of sports injury and fundamentals of sports injury research with a brief overview of some of the emerging measures of sports performance. We describe research study designs that can be used to identify risk factors for injury, injury surveillance programs, and common measures of injury risk and association. Finally, we describe measures of physical performance and training and considerations for using these measures. This review provides sports medicine clinicians with an understanding of current research measures and considerations for designing sports injury research studies. Copyright © 2018 Elsevier Inc. All rights reserved.

20 CFR 628.325 - Incentive grants, capacity building, and technical assistance.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., exceeding title II performance standards (section 106(b)(7)). (2) Incentive grant funds under this section... give consideration to recognizing the performance of service providers within the State. (5) SDA's... capacity building and technical assistance efforts aimed at improving the competencies of the personnel who...

Nurses' and patients' perceptions of privacy protection behaviours and information provision.

PubMed

Kim, Kyunghee; Han, Yonghee; Kim, Ji-Su

2017-08-01

With increased attention to patient privacy and autonomy, privacy protection and information provision for patients are becoming increasingly important. The aim of this study was to identify and analyse nurses' and patients' perceptions of the importance and performance of protecting patients' privacy and providing them with relevant information. This study is a descriptive cross-sectional investigation. Participants and research context: Participants were 168 patients hospitalised in medical and surgical wards and 176 nurses who cared for them. Ethical consideration: This study was approved by the Chung-Ang University Bioethics Committee, and informed written consent was collected from all participants. Nurses' recognition of the importance of protecting patients' privacy and providing adequate information was higher compared to their actual performance, and the nurses' level of performance was higher in comparison with the patients' recognition of its importance. Although a holistic approach to patient privacy protection and information provision is needed, the medical field has not embraced this model of care. These findings provide empirical data to create an ethical environment for the future, as considerable attention has been devoted to patients' rights and medical institutions' liability for providing explanations to patients.

Human factors considerations for the use of color in display systems

NASA Technical Reports Server (NTRS)

Demars, S. A.

1975-01-01

Identified and assessed are those human factor considerations impacting an operator's ability to perform when information is displayed in color as contrasted to monochrome (black and white only). The findings provide valuable guidelines for the assessment of the advantages (and disadvantages) of using a color display system. The use of color provides an additional sensory channel (color perception) which is not available with black and white. The degree to which one can exploit the use of this channel is highly dependent on available display technology, mission information display requirements, and acceptable operational modes.

Draft Geologic Disposal Requirements Basis for STAD Specification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ilgen, Anastasia G.; Bryan, Charles R.; Hardin, Ernest

2015-03-25

This document provides the basis for requirements in the current version of Performance Specification for Standardized Transportation, Aging, and Disposal Canister Systems, (FCRD-NFST-2014-0000579) that are driven by storage and geologic disposal considerations. Performance requirements for the Standardized Transportation, Aging, and Disposal (STAD) canister are given in Section 3.1 of that report. Here, the requirements are reviewed and the rationale for each provided. Note that, while FCRD-NFST-2014-0000579 provides performance specifications for other components of the STAD storage system (e.g. storage overpack, transfer and transportation casks, and others), these have no impact on the canister performance during disposal, and are not discussedmore » here.« less

Getting it right the first time: predicted performance guarantees from the analysis of emergent behavior in autonomous and semi-autonomous systems

NASA Astrophysics Data System (ADS)

Arkin, Ronald C.; Lyons, Damian; Shu, Jiang; Nirmal, Prem; Zafar, Munzir

2012-06-01

A crucially important aspect for mission-critical robotic operations is ensuring as best as possible that an autonomous system be able to complete its task. In a project for the Defense Threat Reduction Agency (DTRA) we are developing methods to provide such guidance, specifically for counter-Weapons of Mass Destruction (C-WMD) missions. In this paper, we describe the scenarios under consideration, the performance measures and metrics being developed, and an outline of the mechanisms for providing performance guarantees.

77 FR 36331 - Nineteenth Meeting: RTCA Special Committee 213, Enhanced Flight Vision Systems/Synthetic Vision...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-18

... Document--Draft DO-XXX, Minimum Aviation Performance Standards (MASPS) for an Enhanced Flight Vision System... Discussion (9:00 a.m.-5:00 p.m.) Provide Comment Resolution of Document--Draft DO-XXX, Minimum Aviation.../Approve FRAC Draft for PMC Consideration--Draft DO- XXX, Minimum Aviation Performance Standards (MASPS...

Design and implementation of the next generation Landsat satellite communications system

USGS Publications Warehouse

Mah, Grant R.; O'Brien, Michael; Garon, Howard; Mott, Claire; Ames, Alan; Dearth, Ken

2012-01-01

The next generation Landsat satellite, Landsat 8 (L8), also known as the Landsat Data Continuity Mission (LDCM), uses a highly spectrally efficient modulation and data formatting approach to provide large amounts of downlink (D/L) bandwidth in a limited X-Band spectrum allocation. In addition to purely data throughput and bandwidth considerations, there were a number of additional constraints based on operational considerations for prevention of interference with the NASA Deep-Space Network (DSN) band just above the L8 D/L band, minimization of jitter contributions to prevent impacts to instrument performance, and the need to provide an interface to the Landsat International Cooperator (IC) community. A series of trade studies were conducted to consider either X- or Ka-Band, modulation type, and antenna coverage type, prior to the release of the request for proposal (RFP) for the spacecraft. Through use of the spectrally efficient rate-7/8 Low-Density Parity-Check error-correction coding and novel filtering, an XBand frequency plan was developed that balances all the constraints and considerations, while providing world-class link performance, fitting 384 Mbits/sec of data into the 375 MHz X-Band allocation with bit-error rates better than 10-12 using an earth-coverage antenna.

An integrated optimum design approach for high speed prop-rotors including acoustic constraints

NASA Technical Reports Server (NTRS)

Chattopadhyay, Aditi; Wells, Valana; Mccarthy, Thomas; Han, Arris

1993-01-01

The objective of this research is to develop optimization procedures to provide design trends in high speed prop-rotors. The necessary disciplinary couplings are all considered within a closed loop multilevel decomposition optimization process. The procedures involve the consideration of blade-aeroelastic aerodynamic performance, structural-dynamic design requirements, and acoustics. Further, since the design involves consideration of several different objective functions, multiobjective function formulation techniques are developed.

Maintenance Business Plans.

ERIC Educational Resources Information Center

Adams, Matt

2002-01-01

Discusses maintenance business plans, statements which provide accountability for facilities maintenance organizations' considerable budgets. Discusses the plan's components: statement of plan objectives, macro and detailed description of the facility assets, maintenance function descriptions, description of key performance indicators, milestone…

Nutritional Considerations for Performance in Young Athletes

PubMed Central

Smith, JohnEric W.; Holmes, Megan E.; McAllister, Matthew J.

2015-01-01

Nutrition is an integral component to any athletes training and performance program. In adults the balance between energy intake and energy demands is crucial in training, recovery, and performance. In young athletes the demands for training and performance remain but should be a secondary focus behind the demands associated with maintaining the proper growth and maturation. Research interventions imposing significant physiological loads and diet manipulation are limited in youth due to the ethical considerations related to potential negative impacts on the growth and maturation processes associated with younger individuals. This necessary limitation results in practitioners providing nutritional guidance to young athletes to rely on exercise nutrition recommendations intended for adults. While many of the recommendations can appropriately be repurposed for the younger athlete attention needs to be taken towards the differences in metabolic needs and physiological differences. PMID:26464898

Recommendations for Planning and Managing International Short-term Pharmacy Service Trips

PubMed Central

Alsharif, Naser Z.; Rovers, John; Connor, Sharon; White, Nicole D.; Hogue, Michael D.

2017-01-01

International pharmacy service trips by schools and colleges of pharmacy allow students to provide health care to medically underserved areas. A literature review (2000-2016) in databases and Internet searches with specific keywords or terms was performed to assess current practices to establish and maintain successful pharmacy service trips. Educational documents such as syllabi were obtained from pharmacy programs and examined. A preliminary draft was developed and authors worked on sections of interest and expertise. Considerations and current recommendations are provided for the key aspects of the home institution and the host country requirements for pharmacy service trips based on findings from a literature search and the authors’ collective, extensive experience. Evaluation of the trip and ethical considerations are also discussed. This article serves as a resource for schools and colleges of pharmacy that are interested in the development of new pharmacy service trips and provides key considerations for continuous quality improvement of current or future activities. PMID:28381883

Recommendations for Planning and Managing International Short-term Pharmacy Service Trips.

PubMed

Johnson, Kalin L; Alsharif, Naser Z; Rovers, John; Connor, Sharon; White, Nicole D; Hogue, Michael D

2017-03-25

International pharmacy service trips by schools and colleges of pharmacy allow students to provide health care to medically underserved areas. A literature review (2000-2016) in databases and Internet searches with specific keywords or terms was performed to assess current practices to establish and maintain successful pharmacy service trips. Educational documents such as syllabi were obtained from pharmacy programs and examined. A preliminary draft was developed and authors worked on sections of interest and expertise. Considerations and current recommendations are provided for the key aspects of the home institution and the host country requirements for pharmacy service trips based on findings from a literature search and the authors' collective, extensive experience. Evaluation of the trip and ethical considerations are also discussed. This article serves as a resource for schools and colleges of pharmacy that are interested in the development of new pharmacy service trips and provides key considerations for continuous quality improvement of current or future activities.

Human Factors in Aerospace: Examples from Projects at NASA Ames

NASA Technical Reports Server (NTRS)

Edwards, Tamsyn

2017-01-01

Human factors is a critical consideration in system performance and system safety. This presentation provides examples of how human factors can be utilized in a variety of applied research projects to create system wide benefits

Assessing performance in complex team environments.

PubMed

Whitmore, Jeffrey N

2005-07-01

This paper provides a brief introduction to team performance assessment. It highlights some critical aspects leading to the successful measurement of team performance in realistic console operations; discusses the idea of process and outcome measures; presents two types of team data collection systems; and provides an example of team performance assessment. Team performance assessment is a complicated endeavor relative to assessing individual performance. Assessing team performance necessitates a clear understanding of each operator's task, both at the individual and team level, and requires planning for efficient data capture and analysis. Though team performance assessment requires considerable effort, the results can be very worthwhile. Most tasks performed in Command and Control environments are team tasks, and understanding this type of performance is becoming increasingly important to the evaluation of mission success and for overall system optimization.

Instantaneous Assessment Of Athletic Performance Using High Speed Video

NASA Astrophysics Data System (ADS)

Hubbard, Mont; Alaways, LeRoy W.

1988-02-01

We describe the use of high speed video to provide quantitative assessment of motion in athletic performance. Besides the normal requirement for accuracy, an essential feature is that the information be provided rapidly enough so that it my serve as valuable feedback in the learning process. The general considerations which must be addressed in the development of such a computer based system are discussed. These ideas are illustrated specifically through the description of a prototype system which has been designed for the javelin throw.

Integrated Flight Performance Analysis of a Launch Abort System Concept

NASA Technical Reports Server (NTRS)

Tartabini, Paul V.

2007-01-01

This paper describes initial flight performance analyses conducted early in the Orion Project to support concept feasibility studies for the Crew Exploration Vehicle s Launch Abort System (LAS). Key performance requirements that significantly affect abort capability are presented. These requirements have implications on sizing the Abort Motor, tailoring its thrust profile to meet escape requirements for both launch pad and high drag/high dynamic pressure ascent aborts. Additional performance considerations are provided for the Attitude Control Motor, a key element of the Orion LAS design that eliminates the need for ballast and provides performance robustness over a passive control approach. Finally, performance of the LAS jettison function is discussed, along with implications on Jettison Motor sizing and the timing of the jettison event during a nominal mission. These studies provide an initial understanding of LAS performance that will continue to evolve as the Orion design is matured.

Scientific method, adversarial system, and technology assessment

NASA Technical Reports Server (NTRS)

Mayo, L. H.

1975-01-01

A basic framework is provided for the consideration of the purposes and techniques of scientific method and adversarial systems. Similarities and differences in these two techniques of inquiry are considered with reference to their relevance in the performance of assessments.

Fact Sheet on Evapotranspiration Cover Systems for Waste Containment

EPA Pesticide Factsheets

This Fact Sheet updates the 2003 Fact Sheet on Evapotranspiration Covers and provides information on the regulatory setting for ET covers, general considerations in their design, performance, and monitoring, and status at the time of writing (2011).

Micro and nano devices in passive millimetre wave imaging systems

NASA Astrophysics Data System (ADS)

Appleby, R.

2013-06-01

The impact of micro and nano technology on millimetre wave imaging from the post war years to the present day is reviewed. In the 1950s whisker contacted diodes in mixers and vacuum tubes were used to realise both radiometers and radars but required considerable skill to realise the performance needed. Development of planar semiconductor devices such as Gunn and Schottky diodes revolutionised mixer performance and provided considerable improvement. The next major breakthrough was high frequency transistors based on gallium arsenide which were initially used at intermediate frequencies but later after further development at millimeter wave frequencies. More recently Monolithic Microwave Integrated circuits(MMICs) offer exceptional performance and the opportunity for innovative design in passive imaging systems. In the future the use of micro and nano technology will continue to drive system performance and we can expect to see integration of antennae, millimetre wave and sub millimetre wave circuits and signal processing.

Performance and operational considerations in the design of vehicle antennas for mobile satellite communications

NASA Technical Reports Server (NTRS)

Milne, R.

1995-01-01

This paper examines the vehicle antenna requirements for mobile satellite systems. The antenna parameters are discussed in the light of the requirements and the limitations in performance imposed by the physical constraints of antenna and by vehicle geometries. Measurements of diffraction and antenna noise temperature in an operational environment are examined, as well as their effects on system margins. Mechanical versus electronic designs are compared with regards to performance, cost, reliability, and design complexity. Comparisons between open-loop and close-loop tracking systems are made and the effects of bandwidth, sidelobe levels, operational constraints, vehicle angular velocity, and acceleration are discussed. Some consideration is given to the use of hybrid systems employing both open and closed-loop tracking. Changes to antenna/terminal specifications are recommended which will provide greater design flexibility and increase the likelihood of meeting the performance and operational requirements.

Preoperative Medical Evaluation: Part 1: General Principles and Cardiovascular Considerations

PubMed Central

Becker, Daniel E

2009-01-01

A thorough assessment of a patient's medical status is standard practice when dental care is provided. Although this is true for procedures performed under local anesthesia alone, the information gathered may be viewed somewhat differently if the dentist is planning to use sedation or general anesthesia as an adjunct to dental treatment. This article is the first of a 2-part sequence and will address general principles and cardiovascular considerations. A second article will address pulmonary, metabolic, and miscellaneous disorders. PMID:19769423

Space for Performing Teacher Identity: Through the Lens of Kafka and Hegel

ERIC Educational Resources Information Center

Parkison, Paul

2008-01-01

Franz Kafka's 1912 novella "The Metamorphosis" provides an analogy for a consideration of the process of teacher identity formation and performance. Gregor Samsa awoke to find himself transformed into a giant beetle. He faced a complete loss of identity as he lost connection with the micro-political space that formed the context of his former role…

The Role of Trait Emotional Intelligence in Academic Performance: Theoretical Overview and Empirical Update.

PubMed

Perera, Harsha N

2016-01-01

Considerable debate still exists among scholars over the role of trait emotional intelligence (TEI) in academic performance. The dominant theoretical position is that TEI should be orthogonal or only weakly related to achievement; yet, there are strong theoretical reasons to believe that TEI plays a key role in performance. The purpose of the current article is to provide (a) an overview of the possible theoretical mechanisms linking TEI with achievement and (b) an update on empirical research examining this relationship. To elucidate these theoretical mechanisms, the overview draws on multiple theories of emotion and regulation, including TEI theory, social-functional accounts of emotion, and expectancy-value and psychobiological model of emotion and regulation. Although these theoretical accounts variously emphasize different variables as focal constructs, when taken together, they provide a comprehensive picture of the possible mechanisms linking TEI with achievement. In this regard, the article redresses the problem of vaguely specified theoretical links currently hampering progress in the field. The article closes with a consideration of directions for future research.

BTSC VAPOR INSTRUSION PRIMER "VAPOR INTRUSION CONSIDERATION FOR REDEVELOPMENT"

EPA Science Inventory

This primer is designed for brownfields stakeholders concerned about vapor intrusion, including property owners, real estate developers, and contractors performing environmental site investigations. It provides an overview of the vapor intrusion issue and how it can impact the ap...

Better Safe Than Sorry.

ERIC Educational Resources Information Center

Wilson, Walter E.

1997-01-01

Describes the use of nonslip flooring in educational facilities to reduce fall injuries and litigation costs. Discussions include the influence of the Americans with Disabilities Act of 1990, regulatory considerations, and a brief litigation overview. Provides a comparison chart of nonslip flooring surface performance. (GR)

Pilot vision considerations : the effect of age on binocular fusion time.

DOT National Transportation Integrated Search

1966-10-01

The study provides data regarding the relationship between vision performance and age of the individual. It has direct application to pilot visual tasks with respect to instrument panel displays, and to controller visual tasks in association with rad...

75 FR 78953 - Department of the Treasury Acquisition Regulation

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

...) A small business, women-owned small business, small disadvantaged business, small business owned and... optimal contract types, including considerations of performance based approaches, small business..., including any business or personal information provided, such as names, addresses, e-mail addresses, or...

Evaluation of a mobile augmented reality application for image guidance of neurosurgical interventions.

PubMed

Kramers, Matthew; Armstrong, Ryan; Bakhshmand, Saeed M; Fenster, Aaron; de Ribaupierre, Sandrine; Eagleson, Roy

2014-01-01

Image guidance can provide surgeons with valuable contextual information during a medical intervention. Often, image guidance systems require considerable infrastructure, setup-time, and operator experience to be utilized. Certain procedures performed at bedside are susceptible to navigational errors that can lead to complications. We present an application for mobile devices that can provide image guidance using augmented reality to assist in performing neurosurgical tasks. A methodology is outlined that evaluates this mode of visualization from the standpoint of perceptual localization, depth estimation, and pointing performance, in scenarios derived from a neurosurgical targeting task. By measuring user variability and speed we can report objective metrics of performance for our augmented reality guidance system.

20 CFR 10.802 - How should an employee prepare and submit requests for reimbursement for medical expenses...

Code of Federal Regulations, 2010 CFR

2010-04-01

... expenses? 10.802 Section 10.802 Employees' Benefits OFFICE OF WORKERS' COMPENSATION PROGRAMS, DEPARTMENT OF... services, supplies or appliances due to an injury sustained in the performance of duty, he or she may... medical report as provided in § 10.800, to OWCP for consideration. (1) The provider of such service shall...

Audit and feedback interventions to improve endoscopist performance: Principles and effectiveness.

PubMed

Tinmouth, Jill; Patel, Jigisha; Hilsden, Robert J; Ivers, Noah; Llovet, Diego

2016-06-01

There is considerable variation in the quality of colonoscopy, attributable in part to endoscopist performance. Audit and feedback (A&F) provides health professionals with a summary of their performance over a period of time and is a common strategy used to improve provider performance. In this review, we discuss current understanding of the mechanism of A&F and describe specific features of effective A&F. To date, trials of A&F to improve colonoscopy performance report heterogeneous results, in part because colonoscopy is a complex procedural skill but also because the quality improvement interventions were sub-optimally implemented or inadequately evaluated. Nonetheless, evidence from a wide range of literature suggests that A&F has the potential to improve endoscopist performance. We discuss future directions for research in this area and provide guidance for providers or health system planners wishing to implement A&F to address quality of colonoscopy in their practice and/or jurisdiction. Copyright © 2016 Elsevier Ltd. All rights reserved.

Practical Considerations for Clinical PET/MR Imaging.

PubMed

Galgano, Samuel; Viets, Zachary; Fowler, Kathryn; Gore, Lael; Thomas, John V; McNamara, Michelle; McConathy, Jonathan

2018-01-01

Clinical PET/MR imaging is currently performed at a number of centers around the world as part of routine standard of care. This article focuses on issues and considerations for a clinical PET/MR imaging program, focusing on routine standard-of-care studies. Although local factors influence how clinical PET/MR imaging is implemented, the approaches and considerations described here intend to apply to most clinical programs. PET/MR imaging provides many more options than PET/computed tomography with diagnostic advantages for certain clinical applications but with added complexity. A recurring theme is matching the PET/MR imaging protocol to the clinical application to balance diagnostic accuracy with efficiency. Copyright © 2017 Elsevier Inc. All rights reserved.

Practical Considerations for Clinical PET/MR Imaging.

PubMed

Galgano, Samuel; Viets, Zachary; Fowler, Kathryn; Gore, Lael; Thomas, John V; McNamara, Michelle; McConathy, Jonathan

2017-05-01

Clinical PET/MR imaging is currently performed at a number of centers around the world as part of routine standard of care. This article focuses on issues and considerations for a clinical PET/MR imaging program, focusing on routine standard-of-care studies. Although local factors influence how clinical PET/MR imaging is implemented, the approaches and considerations described here intend to apply to most clinical programs. PET/MR imaging provides many more options than PET/computed tomography with diagnostic advantages for certain clinical applications but with added complexity. A recurring theme is matching the PET/MR imaging protocol to the clinical application to balance diagnostic accuracy with efficiency. Copyright © 2016 Elsevier Inc. All rights reserved.

Performance retention of the RB211 powerplant in service

NASA Technical Reports Server (NTRS)

Astridge, B. L.; Pinder, J. T.

1981-01-01

An understanding of the mechanisms of deterioration is essential in order that features to counteract performance degradation can be built into the basic design of an engine and nacelle. Furthermore, the interpretation must be continued in service for effective feedback to provide modifications which may be necessary in maintaining a satisfactory performance retention program. The in service assessment must be accurate as to magnitude and causes and this requires consideration of: (1) the powerplant as a complete entity, i.e., the engine components and nacelle including the thrust reverser; (2) measurement of performance in flight rather than by sole reliance on the scaling of test cell data to flight conditions (although some correlation should be possible); and (3) the relationship of engine parts condition to overhaul performance and in flight deterioration level of that engine. These aspects are addressed by consideration of the RB211 engine in service in both the Lockheed L1011 Tristar and Boeing 747 aircraft.

Multi-objective optimization for generating a weighted multi-model ensemble

NASA Astrophysics Data System (ADS)

Lee, H.

2017-12-01

Many studies have demonstrated that multi-model ensembles generally show better skill than each ensemble member. When generating weighted multi-model ensembles, the first step is measuring the performance of individual model simulations using observations. There is a consensus on the assignment of weighting factors based on a single evaluation metric. When considering only one evaluation metric, the weighting factor for each model is proportional to a performance score or inversely proportional to an error for the model. While this conventional approach can provide appropriate combinations of multiple models, the approach confronts a big challenge when there are multiple metrics under consideration. When considering multiple evaluation metrics, it is obvious that a simple averaging of multiple performance scores or model ranks does not address the trade-off problem between conflicting metrics. So far, there seems to be no best method to generate weighted multi-model ensembles based on multiple performance metrics. The current study applies the multi-objective optimization, a mathematical process that provides a set of optimal trade-off solutions based on a range of evaluation metrics, to combining multiple performance metrics for the global climate models and their dynamically downscaled regional climate simulations over North America and generating a weighted multi-model ensemble. NASA satellite data and the Regional Climate Model Evaluation System (RCMES) software toolkit are used for assessment of the climate simulations. Overall, the performance of each model differs markedly with strong seasonal dependence. Because of the considerable variability across the climate simulations, it is important to evaluate models systematically and make future projections by assigning optimized weighting factors to the models with relatively good performance. Our results indicate that the optimally weighted multi-model ensemble always shows better performance than an arithmetic ensemble mean and may provide reliable future projections.

Performance Characteristics of Flush and Shielded Auxiliary Exits at Mach Numbers of 1.5 to 2.0

NASA Technical Reports Server (NTRS)

Abdalla, Kaleel L.

1959-01-01

The performance characteristics of several flush and shielded auxiliary exits were investigated at Mach numbers of 1.5 to 2.0, and jet pressure ratios from jet off to 10. The results indicate that the shielded configurations produced better overall performance than the corresponding flush exits over the Mach-number and pressure-ratio ranges investigated. Furthermore, the full-length shielded exit was highest in performance of all the configurations. The flat-exit nozzle block provided considerably improved performance compared with the curved-exit nozzle block.

Intelligence, personality, and interests: evidence for overlapping traits.

PubMed

Ackerman, P L; Heggestad, E D

1997-03-01

The authors review the development of the modern paradigm for intelligence assessment and application and consider the differentiation between intelligence-as-maximal performance and intelligence-as-typical performance. They review theories of intelligence, personality, and interest as a means to establish potential overlap. Consideration of intelligence-as-typical performance provides a basis for evaluation of intelligence-personality and intelligence-interest relations. Evaluation of relations among personality constructs, vocational interests, and intellectual abilities provides evidence for communality across the domains of personality of J. L. Holland's (1959) model of vocational interests. The authors provide an extensive meta-analysis of personality-intellectual ability correlations, and a review of interest-intellectual ability associations. They identify 4 trait complexes: social, clerical/conventional, science/math, and intellectual/cultural.

Chimpanzees' Context-Dependent Tool Use Provides Evidence for Separable Representations of Hand and Tool Even during Active Use within Peripersonal Space

ERIC Educational Resources Information Center

Povinelli, Daniel J.; Reaux, James E.; Frey, Scott H.

2010-01-01

Considerable attention has been devoted to behaviors in which tools are used to perform actions in extrapersonal space by extending the reach. Evidence suggests that these behaviors result in an expansion of the body schema and peripersonal space. However, humans often use tools to perform tasks within peripersonal space that cannot be…

A review of cryogenic testing performed by the thermochemical test branch, Manned Spacecraft Center in support of Apollo 13 and14

NASA Technical Reports Server (NTRS)

Propp, C. E.; Mcgee, J. M.

1971-01-01

The Apollo 13 anomaly provided considerable impetus for a variety of types of cryogenic and ignition tests. The logic of the various test program designs, the test techniques, and their final impact upon the investigation findings are described. In addition, several test programs initiated to determine the thermal performance and general performance characteristics of the redesigned Apollo 14 cryogenic storage system are presented.

Operational considerations of the Advanced Photovoltaic Solar Array

NASA Technical Reports Server (NTRS)

Stella, Paul M.; Kurland, Richard M.

1992-01-01

Issues affecting the long-term operational performance of the Advanced Photovoltaic Solar Array (APSA) are discussed, with particular attention given to circuit electrical integrity from shadowed and cracked cell modules. The successful integration of individual advanced array components provides a doubling of array specific performance from the previous NASA-developed advanced array (SAFE). Flight test modules both recently fabricated and under fabrication are described. The development of advanced high-performance blanket technology for future APSA enhancement is presented.

Operational considerations of the Advanced Photovoltaic Solar Array

NASA Astrophysics Data System (ADS)

Stella, Paul M.; Kurland, Richard M.

Issues affecting the long-term operational performance of the Advanced Photovoltaic Solar Array (APSA) are discussed, with particular attention given to circuit electrical integrity from shadowed and cracked cell modules. The successful integration of individual advanced array components provides a doubling of array specific performance from the previous NASA-developed advanced array (SAFE). Flight test modules both recently fabricated and under fabrication are described. The development of advanced high-performance blanket technology for future APSA enhancement is presented.

A computer-managed undergraduate physics laboratory

NASA Astrophysics Data System (ADS)

Kalman, C. S.

1987-01-01

Seventeen one-semester undergraduate laboratory courses are managed by a microcomputer system at Concordia University. Students may perform experiments at any time during operating hours. The computer administers pre- and post-tests. Considerable savings in manpower costs is achieved. The system also provides many pedagogical advantages.

Nature's Design Rules.

ERIC Educational Resources Information Center

Reicher, Dan

2000-01-01

Discusses school design considerations for energy-efficient schools that provide learning environments that lead to improved student performance. Design myths are addressed as are use of daylighting and designing schools that can teach students and adults about the importance of conserving energy and money. Two online resources are included. (GR)

Performance Issues for a Changing Electric Power Industry

EIA Publications

1995-01-01

Provides an overview of some of the factors affecting reliability within the electric bulk power system. Historical and projected data related to reliability issues are discussed on a national and regional basis. Current research on economic considerations associated with reliability levels is also reviewed.

Metadata: Pure and Simple, or Is It?

ERIC Educational Resources Information Center

Chalmers, Marilyn

2002-01-01

Discusses issues concerning metadata in Web pages based on experiences in a vocational education center library in Queensland (Australia). Highlights include Dublin Core elements; search engines; controlled vocabulary; performance measurement to assess usage patterns and provide quality control over the vocabulary; and considerations given the…

V-TECS Guide for Bookkeeping/Accounting/Payroll Clerk.

ERIC Educational Resources Information Center

Gregory, Margaret R.; Benson, Robert T.

This guide, an extension of the Vocational-Technical Education Consortium of States (V-TECS) catalog, includes such considerations as background information, decision-making skills, attitudes, and learning methods surrounding the occupations of bookkeeper/accountant/payroll clerk. The guide provides job-relevant task, performance objectives,…

Minicars research safety vehicle program. Phase 3. Volume 1. Technical final report. Report for Jan 1977-Sep 1981

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ausherman, V.K.; Khadikar, A.V.; Syson, S.R.

1981-09-01

The objective of the RSV Program was to provide research and test data applicable to the automobile safety performance requirements for the mid-1980s, and to evaluate the compatibility of these requirements with environmental policies, efficient energy utilization, and consumer economic considerations. The RSV Program has demonstrated that it is possible to make cars much safer than they are presently. It has produced automobile designs that are consistent, at affordable cost, with the national objectives for fuel economy and environmental protection. It has indicated, at least to a limited degree, that the technological findings are applicable, at varying levels, to amore » variety of car designs. And it has provided evidence that these findings can be wrapped in a package of considerable appeal to the public. This Final Report is a comprehensive compilation of the findings of the Phase III efforts of Minicars, Inc. It describes the design and testing of the RSV systems, and the performance levels achieved.« less

Statistical considerations on prognostic models for glioma

PubMed Central

Molinaro, Annette M.; Wrensch, Margaret R.; Jenkins, Robert B.; Eckel-Passow, Jeanette E.

2016-01-01

Given the lack of beneficial treatments in glioma, there is a need for prognostic models for therapeutic decision making and life planning. Recently several studies defining subtypes of glioma have been published. Here, we review the statistical considerations of how to build and validate prognostic models, explain the models presented in the current glioma literature, and discuss advantages and disadvantages of each model. The 3 statistical considerations to establishing clinically useful prognostic models are: study design, model building, and validation. Careful study design helps to ensure that the model is unbiased and generalizable to the population of interest. During model building, a discovery cohort of patients can be used to choose variables, construct models, and estimate prediction performance via internal validation. Via external validation, an independent dataset can assess how well the model performs. It is imperative that published models properly detail the study design and methods for both model building and validation. This provides readers the information necessary to assess the bias in a study, compare other published models, and determine the model's clinical usefulness. As editors, reviewers, and readers of the relevant literature, we should be cognizant of the needed statistical considerations and insist on their use. PMID:26657835

Comparative values of medical school assessments in the prediction of internship performance.

PubMed

Lee, Ming; Vermillion, Michelle

2018-02-01

Multiple undergraduate achievements have been used for graduate admission consideration. Their relative values in the prediction of residency performance are not clear. This study compared the contributions of major undergraduate assessments to the prediction of internship performance. Internship performance ratings of the graduates of a medical school were collected from 2012 to 2015. Hierarchical multiple regression analyses were used to examine the predictive values of undergraduate measures assessing basic and clinical sciences knowledge and clinical performances, after controlling for differences in the Medical College Admission Test (MCAT). Four hundred eighty (75%) graduates' archived data were used in the study. Analyses revealed that clinical competencies, assessed by the USMLE Step 2 CK, NBME medicine exam, and an eight-station objective structured clinical examination (OSCE), were strong predictors of internship performance. Neither the USMLE Step 1 nor the inpatient internal medicine clerkship evaluation predicted internship performance. The undergraduate assessments as a whole showed a significant collective relationship with internship performance (ΔR 2  = 0.12, p < 0.001). The study supports the use of clinical competency assessments, instead of pre-clinical measures, in graduate admission consideration. It also provides validity evidence for OSCE scores in the prediction of workplace performance.

Performance of heat exchangers used in whole body perfusion circuits.

PubMed Central

Bethune, D W; Gill, R D; Wheeldon, D R

1975-01-01

The performance of some commonly used heat exchangers has been investigated with particular reference to the effect of varying the water flow. The results demonstrate that there is considerable variation in the performance of most units when the water flow is changed. It is suggested that more information should be provided by the manufacturers of heat exchangers and that there should be a supply of water in cardiothoracic theatres at a sufficient pressure to allow the full performance of the heat exchangers to be realized. PMID:1198400

Avionics performance analysis: A historical review and a current assessment of flight instrumentation and control systems in civil aviation

NASA Technical Reports Server (NTRS)

1978-01-01

The role of flight instrumentation and control systems in the advancement of civil aviation to the safest form of commercial transportation is discussed. Safety, cost reduction, and increased capabilities provided by recent developments are emphasized. Cost/performance considerations are considered in terms of determining the relative values of comparable systems or the absolute worth of a system.

Parameter Uncertainties for a 10-Meter Ground-Based Optical Reception Station

NASA Technical Reports Server (NTRS)

Shaik, K.

1990-01-01

Performance uncertainties for a 10-m optical reception station may arise from the nature of the communications channel or from a specific technology choice. Both types of uncertainties are described in this article to develop an understanding of the limitations imposed by them and to provide a rational basis for making technical decisions. The performance at night will be considerably higher than for daytime reception.

Colorado Model Content Standards: Foreign Language.

ERIC Educational Resources Information Center

Colorado State Dept. of Education, Denver.

The model course content standards for foreign language instruction in Colorado's public schools, K-12, provide guidelines, not curriculum, for school districts to design language programs. An introductory section presents some basic considerations in program design. The two general standards for foreign language performance are that: (1) students…

Student Portfolios 101

ERIC Educational Resources Information Center

Lippert, Robert

2004-01-01

Student portfolios can offer great benefits to both high school and postsecondary education programs. They assist instructors in determining the progress of a student's performance and provide students with a vital self-promotion tool for job searches or the higher education application process. This brief article describes a few considerations to…

Operational Physical Performance and Fitness in Military Women: Physiological, Musculoskeletal Injury, and Optimized Physical Training Considerations for Successfully Integrating Women Into Combat-Centric Military Occupations.

PubMed

Nindl, Bradley C; Jones, Bruce H; Van Arsdale, Stephanie J; Kelly, Karen; Kraemer, William J

2016-01-01

This article summarizes presentations from a 2014 United States Department of Defense (DoD) Health Affairs Women in Combat symposium addressing physiological, musculoskeletal injury, and optimized physical training considerations from the operational physical performance section. The symposium was held to provide a state-of-the-science meeting on the U.S. DoD's rescinding of the ground combat exclusion policy opening up combat-centric occupations to women. Physiological, metabolic, body composition, bone density, cardiorespiratory fitness, and thermoregulation differences between men and women were briefly reviewed. Injury epidemiological data are presented within military training and operational environments demonstrating women to be at a higher risk for musculoskeletal injuries than men. Physical training considerations for improved muscle strength and power, occupational task performance, load carriage were also reviewed. Particular focus of this article was given to translating physiological and epidemiological findings from the literature on these topics toward actionable guidance and policy recommendations for military leaders responsible for military physical training doctrine: (1) inclusion of resistance training with special emphasis on strength and power development (i.e., activation of high-threshold motor units and recruitment of type II high-force muscle fibers), upper-body strength development, and heavy load carriage, (2) moving away from "field expediency" as the major criteria for determining military physical training policy and training implementation, (3) improvement of load carriage ability with emphasis placed on specific load carriage task performance, combined with both resistance and endurance training, and (4) providing greater equipment resources, coaching assets, and increased training time dedicated to physical readiness training. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

Systems for hybrid cars

NASA Astrophysics Data System (ADS)

Bitsche, Otmar; Gutmann, Guenter

Not only sharp competition but also legislation are pushing development of hybrid drive trains. Based on conventional internal combustion engine (ICE) vehicles, these drive trains offer a wide range of benefits from reduced fuel consumption and emission to multifaceted performance improvements. Hybrid electric drive trains may also facilitate the introduction of fuel cells (FC). The battery is the key component for all hybrid drive trains, as it dominates cost and performance issues. The selection of the right battery technology for the specific automotive application is an important task with an impact on costs of development and use. Safety, power, and high cycle life are a must for all hybrid applications. The greatest pressure to reduce cost is in soft hybrids, where lead-acid embedded in a considerate management presents the cheapest solution, with a considerable improvement in performance needed. From mild to full hybridization, an improvement in specific power makes higher costs more acceptable, provided that the battery's service life is equivalent to the vehicle's lifetime. Today, this is proven for the nickel-metal hydride system. Lithium ion batteries, which make use of a multiple safety concept, and with some development anticipated, provide even better prospects in terms of performance and costs. Also, their scalability permits their application in battery electric vehicles—the basis for better performance and enhanced user acceptance. Development targets for the batteries are discussed with a focus on system aspects such as electrical and thermal management and safety.

Takeoff certification considerations for large subsonic and supersonic transport airplanes using the Ames flight simulator for advanced aircraft

NASA Technical Reports Server (NTRS)

Snyder, C. T.; Drinkwater, F. J., III; Fry, E. B.; Forrest, R. D.

1973-01-01

Data for use in development of takeoff airworthiness standards for new aircraft designs such as the supersonic transport (SST) and the large wide-body subsonic jet transport are provided. An advanced motion simulator was used to compare the performance and handling characteristics of three representative large jet transports during specific flight certification tasks. Existing regulatory constraints and methods for determining rotation speed were reviewed, and the effects on takeoff performance of variations in rotation speed, pitch attitude, and pitch attitude rate during the rotation maneuver were analyzed. A limited quantity of refused takeoff information was obtained. The aerodynamics, wing loading, and thrust-to-weight ratio of the subject SST resulted in takeoff speeds limited by climb (rather than lift-off) considerations. Take-off speeds based on U.S. subsonic transport requirements were found unacceptable because of the criticality of rotation-abuse effects on one-engine-inoperative climb performance. Adequate safety margin was provided by takeoff speeds based on proposed Anglo-French supersonic transport (TSS) criteria, with the limiting criterion being that takeoff safety speed be at least 1.15 times the one-engine-inoperative zero-rate-of-climb speed. Various observations related to SST certification are presented.

Methodological Challenges in Studies Examining the Effects of Breakfast on Cognitive Performance and Appetite in Children and Adolescents.

PubMed

Adolphus, Katie; Bellissimo, Nick; Lawton, Clare L; Ford, Nikki A; Rains, Tia M; Totosy de Zepetnek, Julia; Dye, Louise

2017-01-01

Breakfast is purported to confer a number of benefits on diet quality, health, appetite regulation, and cognitive performance. However, new evidence has challenged the long-held belief that breakfast is the most important meal of the day. This review aims to provide a comprehensive discussion of the key methodological challenges and considerations in studies assessing the effect of breakfast on cognitive performance and appetite control, along with recommendations for future research. This review focuses on the myriad challenges involved in studying children and adolescents specifically. Key methodological challenges and considerations include study design and location, sampling and sample section, choice of objective cognitive tests, choice of objective and subjective appetite measures, merits of providing a fixed breakfast compared with ad libitum, assessment and definition of habitual breakfast consumption, transparency of treatment condition, difficulty of isolating the direct effects of breakfast consumption, untangling acute and chronic effects, and influence of confounding variables. These methodological challenges have hampered a clear substantiation of the potential positive effects of breakfast on cognition and appetite control and contributed to the debate questioning the notion that breakfast is the most important meal of the day. © 2017 American Society for Nutrition.

Methodological Challenges in Studies Examining the Effects of Breakfast on Cognitive Performance and Appetite in Children and Adolescents123

PubMed Central

Bellissimo, Nick; Ford, Nikki A; Rains, Tia M

2017-01-01

Breakfast is purported to confer a number of benefits on diet quality, health, appetite regulation, and cognitive performance. However, new evidence has challenged the long-held belief that breakfast is the most important meal of the day. This review aims to provide a comprehensive discussion of the key methodological challenges and considerations in studies assessing the effect of breakfast on cognitive performance and appetite control, along with recommendations for future research. This review focuses on the myriad challenges involved in studying children and adolescents specifically. Key methodological challenges and considerations include study design and location, sampling and sample section, choice of objective cognitive tests, choice of objective and subjective appetite measures, merits of providing a fixed breakfast compared with ad libitum, assessment and definition of habitual breakfast consumption, transparency of treatment condition, difficulty of isolating the direct effects of breakfast consumption, untangling acute and chronic effects, and influence of confounding variables. These methodological challenges have hampered a clear substantiation of the potential positive effects of breakfast on cognition and appetite control and contributed to the debate questioning the notion that breakfast is the most important meal of the day. PMID:28096143

Introduction to polymer-based solid-contact ion-selective electrodes-basic concepts, practical considerations, and current research topics.

PubMed

Bieg, Christoph; Fuchsberger, Kai; Stelzle, Martin

2017-01-01

This review aims at providing an introductory overview for researchers new to the field of ion-selective electrodes. Both state of the art technology and novel developments towards solid-contact reference (sc-RE) and solid-contact ion selective electrodes (sc-ISE) are discussed. This technology has potentially widespread and important applications provided certain performance criteria can be met. We present basic concepts, operation principles, and theoretical considerations with regard to their function. Analytical performance and suitability of sc-RE and sc-ISE for a given application depend on critical parameters, which are discussed in this review. Comprehensive evaluation of sensor performance along this set of parameters is considered indispensable to allow for a well-founded comparison of different technologies. Methods and materials employed in the construction of sc-RE and sc-ISE, in particular the solid contact and the polymer membrane composite, are presented and discussed in detail. Operation principles beyond potentiometry are mentioned, which would further extend the field of ISE application. Finally, we conclude by directing the reader to important areas for further scientific research and development work considered particularly critical and promising for advancing this field in sensor R&D. Graphical Abstract ᅟ.

Robust, Decoupled, Flight Control Design with Rate Saturating Actuators

NASA Technical Reports Server (NTRS)

Snell, S. A.; Hess, R. A.

1997-01-01

Techniques for the design of control systems for manually controlled, high-performance aircraft must provide the following: (1) multi-input, multi-output (MIMO) solutions, (2) acceptable handling qualities including no tendencies for pilot-induced oscillations, (3) a tractable approach for compensator design, (4) performance and stability robustness in the presence of significant plant uncertainty, and (5) performance and stability robustness in the presence actuator saturation (particularly rate saturation). A design technique built upon Quantitative Feedback Theory is offered as a candidate methodology which can provide flight control systems meeting these requirements, and do so over a considerable part of the flight envelope. An example utilizing a simplified model of a supermaneuverable fighter aircraft demonstrates the proposed design methodology.

Comparisons of cloud cover evaluated from LANDSAT imagery and meteorological stations across the British Isles

NASA Technical Reports Server (NTRS)

Barrett, E. C. (Principal Investigator); Grant, C. K.

1976-01-01

The author has identified the following significant results. This stage of the study has confirmed the initial supposition that LANDSAT data could be analyzed to provide useful data on cloud amount, and that useful light would be thrown thereby on the performance of the ground observer of this aspect of the state of the sky. This study, in comparison with previous studies of a similar nature using data from meteorological satellites, has benefited greatly from the much higher resolution data provided by LANDSAT. This has permitted consideration of not only the overall performance of the surface observer in estimating total cloud cover, but also his performance under different sky conditions.

A study of human performance in a rotating environment

NASA Technical Reports Server (NTRS)

Green, J. A.; Peacock, J. L.; Holm, A. P.

1971-01-01

Consideration is given to the lack of sufficient data relative to the response of man to the attendant oculovestibular stimulations induced by multi-directional movement of an individual within the rotating environment to provide the required design criteria. This was done to determine the overall impact of artificial gravity simulations on potential design configurations and crew operational procedures. Gross locomotion and fine motor performance were evaluated. Results indicate that crew orientation, rotational rates, vehicle design configurations, and operational procedures may be used to reduce the severity of the adverse effects of the Coriolis and cross-coupled angular accelerations acting on masses moving within a rotating environment. Results further indicate that crew selection, motivation, and short-term exposures to the rotating environment may be important considerations for future crew indoctrination and training programs.

Minicars research safety vehicle program. Phase 3. Volume 2. Appendices. Final report Jan 1977-Sep 1981

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ausherman, V.K.; Khadikar, A.V.; Syson, S.R.

1981-09-01

The objective of the RSV Program was to provide research and test data applicable to the automobile safety performance requirements for the mid-1980s, and to evaluate the compatibility of these requirements with environmental policies, efficient energy utilization, and consumer economic considerations.

Linguistic Parameters in Performance Models.

ERIC Educational Resources Information Center

Mansell, Philip

This paper deals with problems concerning the nature of the input to a phonetic processor. Several assumptions provide the basis for consideration of the problem. There is a phonological level of processing which reflects the sound structure of the language; the rules associated with it are not affected by variables associated either with the…

Validation of Microbial Source Tracking Markers and Detection Protocols: Considerations for Effective Interpretation

EPA Science Inventory

The goal of this chapter is to provide an overview of MST marker characteristics, to describe performance criteria of detection protocols used and to offer guidelines for the effective interpretation of the results. Since the trend in the research community has shifted towards (q...

Selecting measures to prevent deleterious alkali-silica reaction in concrete : rationale for the AASHTO PP65 prescriptive approach.

DOT National Transportation Integrated Search

2012-10-01

PP65-11 provides two approaches for selecting preventive measures: (i) a performance approach based on laboratory testing, and (ii) a prescriptive approach based on a consideration of the reactivity of the aggregate, type and size of structure, expos...

Performance Dependences of Multiplication Layer Thickness for InP/InGaAs Avalanche Photodiodes Based on Time Domain Modeling

NASA Technical Reports Server (NTRS)

Xiao, Yegao; Bhat, Ishwara; Abedin, M. Nurul

2005-01-01

InP/InGaAs avalanche photodiodes (APDs) are being widely utilized in optical receivers for modern long haul and high bit-rate optical fiber communication systems. The separate absorption, grading, charge, and multiplication (SAGCM) structure is an important design consideration for APDs with high performance characteristics. Time domain modeling techniques have been previously developed to provide better understanding and optimize design issues by saving time and cost for the APD research and development. In this work, performance dependences on multiplication layer thickness have been investigated by time domain modeling. These performance characteristics include breakdown field and breakdown voltage, multiplication gain, excess noise factor, frequency response and bandwidth etc. The simulations are performed versus various multiplication layer thicknesses with certain fixed values for the areal charge sheet density whereas the values for the other structure and material parameters are kept unchanged. The frequency response is obtained from the impulse response by fast Fourier transformation. The modeling results are presented and discussed, and design considerations, especially for high speed operation at 10 Gbit/s, are further analyzed.

Which form of assessment provides the best information about student performance in chemistry examinations?

NASA Astrophysics Data System (ADS)

Hudson, Ross D.; Treagust, David F.

2013-04-01

Background . This study developed from observations of apparent achievement differences between male and female chemistry performances in a state university entrance examination. Male students performed more strongly than female students, especially in higher scores. Apart from the gender of the students, two other important factors that might influence student performance were format of questions (short-answer or multiple-choice) and type of questions (recall or application). Purpose The research question addressed in this study was: Is there a relationship between performance in state university entrance examinations in chemistry and school chemistry examinations and student gender, format of questions - multiple-choice or short-answer, and conceptual level - recall or application? Sample The two sources of data were: (1) secondary analyses of five consecutive years' data published by the examining authority of chemistry examinations, and (2) tests conducted with 192 students which provided information about all aspects of the three variables (question format, question type and gender) under consideration. Design and methods Both sources of data were analysed using ANOVA to compare means for the variables under consideration and the statistical significance of any differences. The data from the tests were also analysed using Rasch analysis to determine differences in gender performance. Results When overall mean data are considered, both male and female students performed better on multiple-choice questions and recall questions than on short-answer questions and application questions, respectively. When overall mean data are considered, male students outperformed female students in both the university entrance and school tests, particularly in the higher scores. When data were analysed with Rasch, there was no statistically significant difference in performance between males and females of equal ability. Conclusions Both male and female students generally perform better on multiple-choice questions than they do on short-answer questions. However, when the questions are matched in terms of difficulty (using Rasch analysis), the differences in performance between multiple-choice and short-answer are quite small. Rasch analysis showed that there was little difference in performance between males and females of equal ability. This study shows that a simple face-value score analysis of relative student performance - in this case, in chemistry - can be deceptive unless the actual abilities of the students concerned, as measured by a tool such as Rasch, are taken into consideration before reaching any conclusion.

Ethical, financial, and legal considerations to implementing emergency department HIV screening: a report from the 2007 conference of the National Emergency Department HIV Testing Consortium.

PubMed

Waxman, Michael J; Popick, Rachel S; Merchant, Roland C; Rothman, Richard E; Shahan, Judy B; Almond, Gregory

2011-07-01

We seek to identify and analyze, from a group of participants experienced with HIV screening, the perceived challenges and solutions to the ethical, financial, and legal considerations of emergency department (ED)-based HIV screening. We performed a qualitative analysis of the focus group discussions from the ethical, financial, and legal considerations portion of the inaugural National Emergency Department HIV Testing Consortium conference. Four groups composed of 20 to 25 consortium participants engaged in semistructured, facilitated focus group discussions. The focus group discussions were audiotaped and transcribed. A primary reader identified major themes and subthemes and representative quotes from the transcripts and summarized the discussions. Secondary and tertiary readers reviewed the themes, subthemes, and summaries for accuracy. The focus group discussions centered on the following themes. Ethical considerations included appropriateness of HIV screening in the ED and ethics of key elements of the 2006 Centers for Disease Control and Prevention HIV testing recommendations. Financial considerations included models of payment and support, role of health care insurance, financial ethics and downstream financial burdens, and advocacy approaches. Legal considerations included the adequacy of obtaining consent, partner notification, disclosure of HIV results, difficulties in addressing special populations, failure of not performing universal screening, failure to notify a person of being tested, failure to notify someone of their test results, liability of inaccurate tests, and failure to link to care. This qualitative analysis provides a broadly useful foundation to the ethical, financial, and legal considerations of implementing HIV screening programs in EDs throughout the United States. Copyright © 2011. Published by Mosby, Inc.

Highly Multiplexed, Single Cell Transcriptomic Analysis of T-Cells by Microfluidic PCR.

PubMed

Dominguez, Maria; Roederer, Mario; Chattopadhyay, Pratip K

2017-01-01

Recently, technologies have been developed to measure expression of 96 (or more) mRNA transcripts at once from a single cell. Here we describe methods and important considerations for use of Fluidigm's BioMark platform for multiplexed single cell gene expression. We describe how to qualify primer/probes, select genes to examine in 96-parameter panels, perform the reverse transcription/cDNA synthesis step, and operate the instrument. In addition, we describe data analysis considerations. This technology has enormous value for characterizing the heterogeneity of T-cells, thereby providing a useful tool for immune monitoring.

Important considerations when applying for a postdoctoral fellowship.

PubMed

Sherry, Daisy; Fennessy, Michelle M; Benavente, Viola G; Ruppar, Todd M; Collins, Eileen G

2013-06-01

To examine important decision points that graduates should consider before applying for a postdoctoral fellowship. A literature review was performed. A synthesis of the present data on the postdoctoral fellowship, eligibility criteria, application process, and important considerations was provided. Experiential knowledge from four present postdoctoral fellows was included. The goals, advantages, and disadvantages of the fellowship were discussed. In conclusion, the postdoctoral fellowship was examined to offer important considerations in the decision to pursue this opportunity. The clinical relevance of this article is related to the training and education of nurses to become the next generation of independent, successful scholars and scientists. Postdoctoral training adds valuable contributions and quality to the field of nursing. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.

Performance evaluation of an evaporative pad greenhouse system for utilization of power plant reject heat

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olszewski, M.; Trezek, G.J.

1976-01-01

The overall performance of an evaporative pad greenhouse is considered in terms of the pad heat and mass transfer, the energy budget of the vegetation, and the performance of the power plant. An analytical predictive model for the pad performance was developed utilizing the Merkel total heat approximation. Data obtained from actual greenhouse performance provides an experimental verification of the pad model. Energy balance considerations on the vegetation provide a means of viewing optimal plant growth in terms of the power plant energy dissipation. In general, the results indicate that when an evaporative pad greenhouse system is used for wastemore » heat dispersal, the vegetation can be maintained within its thermal requirement zone, crop irrigation requirements are significantly reduced, and the power plant performance is comparable with conventional closed loop heat rejection systems.« less

Second-Tier Database for Ecosystem Focus, 2002-2003 Annual Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Holmes, Chris; Muongchanh, Christine; Anderson, James J.

2003-11-01

The Second-Tier Database for Ecosystem Focus (Contract 00004124) provides direct and timely public access to Columbia Basin environmental, operational, fishery and riverine data resources for federal, state, public and private entities. The Second-Tier Database known as Data Access in Realtime (DART) integrates public data for effective access, consideration and application. DART also provides analysis tools and performance measures helpful in evaluating the condition of Columbia Basin salmonid stocks.

Low noise SQUIDs

NASA Astrophysics Data System (ADS)

de Waal, V. J.

1983-02-01

The present investigation deals with the design, fabrication, and limitations of very sensitive SQUID (Superconducting Quantum Interference Device) magnetometers. The SQUID magnetometer is based on a utilization of the Josephson effect. A description of the theoretical background is provided, and high performance DC SQUIDs with submicron niobium Josephson junctions are discussed, taking into account design considerations, fabrication, junction characterization, the performance of the SQUID and input coil, and the gradiometer performance. The simulation and optimization of a DC SQUID with finite capacitance is considered, giving attention to the implementation of a simulation procedure on a hybrid computer.

Skylab experiments. Volume 2: Remote sensing of earth resources

NASA Technical Reports Server (NTRS)

1973-01-01

This volume covers the broad area of earth resources in which Skylab experiments will be performed. A brief description of the Skylab program, its objectives, and vehicles is included. Section 1 introduces the concept and historical significance of remote sensing, and discusses the major scientific considerations involved in remotely sensing the earth's resources. Sections 2 through 6 provide a description of the individual earth resource sensors and experiments to be performed. Each description includes a discussion of the experiment background and scientific objectives, the equipment involved, and a discussion of significant experiment performance areas.

Perspectives on Performance Indicators: GCE Advanced Level and Differences Between Institution Types in Cost Effectiveness.

ERIC Educational Resources Information Center

Fielding, A.

1998-01-01

Applies multilevel models of cost-effectiveness to numerous types of (British) institutions providing courses of instruction in the General Certificate of Education at Advanced Level. Different impressions may be gained about an institution's relative effectiveness when cost considerations are combined with outcome measures. Data evaluation needs…

23 CFR 635.117 - Labor and employment.

Code of Federal Regulations, 2012 CFR

2012-04-01

... be performed by convict labor at the work site or within the limits of any Federal-aid highway... consideration are projects located on roads within or providing access to an Indian reservation or other Indian lands as defined under the term “Indian Reservation Roads” in 23 U.S.C. 101 and regulations issued...

23 CFR 635.117 - Labor and employment.

Code of Federal Regulations, 2013 CFR

2013-04-01

... be performed by convict labor at the work site or within the limits of any Federal-aid highway... consideration are projects located on roads within or providing access to an Indian reservation or other Indian lands as defined under the term “Indian Reservation Roads” in 23 U.S.C. 101 and regulations issued...

23 CFR 635.117 - Labor and employment.

Code of Federal Regulations, 2014 CFR

2014-04-01

... be performed by convict labor at the work site or within the limits of any Federal-aid highway... consideration are projects located on roads within or providing access to an Indian reservation or other Indian lands as defined under the term “Indian Reservation Roads” in 23 U.S.C. 101 and regulations issued...

Rapid Automatized Naming and Reading Performance: A Meta-Analysis

ERIC Educational Resources Information Center

Araújo, Susana; Reis, Alexandra; Petersson, Karl Magnus; Faísca, Luís

2015-01-01

Evidence that rapid naming skill is associated with reading ability has become increasingly prevalent in recent years. However, there is considerable variation in the literature concerning the magnitude of this relationship. The objective of the present study was to provide a comprehensive analysis of the evidence on the relationship between rapid…

The SCSTPE organic Rankine engine

NASA Technical Reports Server (NTRS)

Boda, F. P.

1980-01-01

The organic Rankine cycle engine under consideration for a solar thermal system being developed is described. Design parameters, method of control, performance and cost data are provided for engine power levels up to 80 kWe; efficiency is shown as a function of turbine inlet temperature in the range of 149 C to 427 C.

77 FR 39561 - Advanced Braking Technologies That Rely on Forward-Looking Sensors; Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

... test scenarios: driving over a 1-inch thick steel plate lying flat on the pavement (a plate often used... provide specific recommendations for other surrogate vehicle design considerations that should be... perform as designed (e.g., driving in the dark or in adverse weather)? What information should be...

The Effects of Item by Item Feedback Given during an Ability Test.

ERIC Educational Resources Information Center

Whetton, C.; Childs, R.

1981-01-01

Answer-until-correct (AUC) is a procedure for providing feedback during a multiple-choice test, giving an increased range of scores. The performance of secondary students on a verbal ability test using AUC procedures was compared with a group using conventional instructions. AUC scores considerably enhanced reliability but not validity.…

Agricultural Biology, Science (Experimental): 5314.09.

ERIC Educational Resources Information Center

Basnett, Fred D.

This unit of instruction was designed as a laboratory study of soils, plants, crop improvements and pesticides, and gives consideration to fish farming, tropical fish, and careers in agriculture. The booklet lists the relevant state-adopted texts and states the performance objectives for the unit. It provides an outline of the course content and…

76 FR 27030 - Intent To Prepare a Supplemental Environmental Impact Statement for the Indianapolis, White River...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-10

... performance standards nor does it provide the level of protection for which the project was authorized. A full... consideration of all alternatives, the best plan will be selected to achieve acceptable risk levels. FOR FURTHER... identified alternatives, especially aesthetics, communities, economics, biological and cultural resources...

Policy and Barriers Related to Implementing Adult E-Learning in Taiwan

ERIC Educational Resources Information Center

Chung, Hsiu-Ying; Lee, Gwo-Guang; Liu, Shih-Hwa

2014-01-01

The work quality of public servants direct affects a country's administrative performance, and the Taiwan government has recently invested a considerable amount of funds in constructing e-government learning platforms and developing digital courses to provide all public servants with sufficient on-the-job training and enhance the quality of human…

Flame Tests Performed Safely: A Safe and Effective Alternative to the Traditional Flame Test

ERIC Educational Resources Information Center

Dogancay, Deborah

2005-01-01

The trend toward inquiry-based learning is providing today's students with a more enriching education. When implementing inquiry it is important to recognize the great number of safety concerns that accompany this paradigm shift. Fortunately, with some consideration, teachers can shape students' laboratory experiments into safe and valuable…

Governing Healthcare through Performance Measurement in Massachusetts and the Netherlands

PubMed Central

Van der Wees, Philip J.; der Sanden, Maria W.G. Nijhuis-van; van Ginneken, Ewout; Ayanian, John Z.; Schneider, Eric C.; Westert, Gert P.

2016-01-01

Massachusetts and the Netherlands have implemented comprehensive health reforms, which have heightened the importance of performance measurement. The performance measures addressing access to health care and patient experience are similar in the two jurisdictions, but measures of processes and outcomes of care differ considerably. In both jurisdictions, the use of health outcomes to compare the quality of health care organizations is limited, and specific information about costs is lacking. New legislation in both jurisdictions led to the establishment of institutes to monitor the quality of care, similar mandates to make the performance of health care providers transparent, and to establish a shared responsibility of providers, consumers and insurers to improve the quality of health care. In Massachusetts a statewide mandatory quality measure set was established to monitor the quality of care. The Netherlands is stimulating development of performance measures by providers based on a mandatory framework for developing such measures. Both jurisdictions are expanding the use of patient-reported outcomes to support patient care, quality improvement, and performance comparisons with the aim of explicitly linking performance to new payment incentives. PMID:24138729

Performance of multimirror quartzline lamps in a high-pressure, underwater environment

NASA Technical Reports Server (NTRS)

Slater, Howard A.

1988-01-01

Multimirror Quartzline Lamps are extremely versatile and effective for nonconventional imaging requirements such as high-speed photo and video instrumentation and high-magnification imaging. The lamps' versatility though, is not limited to conventional environments. Many research experiments and projects require a high pressure environment. Continuous photographic data acquisition in a high-pressure vessel requires wall penetrations and creates design problems as well as potential failure sites. Underwater photography adds the extra consideration of a liquid. This report expands upon the basic research presented in, Performance of Multimirror Quartzline Lamps in High-Pressure Environments, (NASA-TM-83793, Ernie Walker and Howard Slater, 1984). The report provides information to professional industrial, scientific, and technical photographers as well as research personnel on the survivability of lighting a multimirror quartzline lamp in a nonconventional high-pressure underwater environment. Test results of lighted ELH 300 W multimirror quartzline lamps under high-pressure conditions are documented and general information on the lamps' intensity (footcandle output), cone of light coverage, approximate color temperature is provided. Continuous lighting considerations in liquids are also discussed.

Design and performance considerations of evaporative-pad, waste-heat greenhouses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olszewski, M.

1978-01-01

Rising fuel costs and limited fuel availability have forced greenhouse operators to seek alternative means of heating their greenhouses in an effort to reduce production costs and conserve energy. One such alternative uses power plant reject heat, which is contained in the condenser cooling water, and a bank of evaporative pads to provide winter heating. The design technique used to size the evaporative pad system to meet both summer cooling and winter heating demands is described. Additionally, a computational scheme that simulates the system performance is presented. This analytical model is used to determine the greenhouse operating conditions that maintainmore » the vegetation in its thermal comfort zone. The evaporative pad model uses the Merkel total heat approximation and an experimentally derived transfer coefficient. Energy balance considerations on the vegetation provide a means of viewing optimal vegetation growth in terms of greenhouse environmental factors. In general, the results indicate that the vegetation can be maintained within its thermal comfort zone if sufficient warm water is available to the pads and the air stream flow is properly adjusted.« less

Alternative approaches for vertebrate ecotoxicity tests in the ...

EPA Pesticide Factsheets

The need for alternative approaches to the use of vertebrate animals for hazard assessing chemicals and pollutants has become of increasing importance. It is now the first consideration when initiating a vertebrate ecotoxicity test, to ensure that unnecessary use of vertebrate organisms is minimised wherever possible. For some regulatory purposes, the use of vertebrate organisms for environmental risk assessments (ERA) has even been banned, and in other situations the numbers of organisms tested has been dramatically reduced, or the severity of the procedure refined. However, there is still a long way to go to achieve replacement of vertebrate organisms to generate environmental hazard data. The development of animal alternatives is not just based on ethical considerations but also to reduce the cost of performing vertebrate ecotoxicity tests and in some cases to provide better information aimed at improving ERAs. The present focus paper provides an overview of the considerable advances that have been made towards alternative approaches for ecotoxicity assessments over the last few decades. The need for alternative approaches to the use of vertebrate animals for hazard assessing chemicals and pollutants has become of increasing importance. It is now the first consideration when initiating a vertebrate ecotoxicity test, to ensure that unnecessary use of vertebrate organisms is minimised wherever possible. For some regulatory purposes, the use of vertebrate organi

Consideration of liners and covers in performance assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phifer, Mark A.; Seitz, Robert R.; Suttora, Linda C.

2014-09-18

On-site disposal cells are in use and being considered at several United States Department of Energy (USDOE) sites as the final disposition for large amounts of waste associated with cleanup of contaminated areas and facilities. These disposal cells are typically regulated by States and/or the U.S. Environmental Protection Agency under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) in addition to having to comply with requirements in DOE Order 435.1, Radioactive Waste Management due to the radioactive waste. The USDOE-Environmental Management Office of Site Restoration formed a working group to foster improved communication and sharing of information for personnelmore » associated with these CERCLA disposal cells and work towards more consistent assumptions, as appropriate, for technical and policy considerations related to CERCLA risk assessments and DOE Order 435.1 performance assessments in support of a Record of Decision and Disposal Authorization Statement, respectively. One of the issues considered by the working group, which is addressed in this report, was how to appropriately consider the performance of covers and liners/leachate collections systems in the context of a DOE Order 435.1 performance assessment (PA). This same information may be appropriate for consideration within CERCLA risk assessments for these facilities. These OSDCs are generally developed to meet hazardous waste (HW) disposal design standards under the Resource Conservation and Recovery Act (RCRA) as well as the DOE Order 435.1 performance based standards for disposal of radioactive waste. To meet the standards for HW, the facilities typically include engineered covers and liner/leachate collection systems. Thus, when considering such facilities in the context of a DOE Order 435.1 PA, there is a need to address the evolution of performance of covers and liner/leachate collection systems in the context of meeting a performance standard considering time frames of 1,000 years for compliance and potentially thousands of years based on the wastes to test the robustness of the system. Experience has shown that there are a range of expectations and perspectives from the different regulators involved at different sites when reviewing assumptions related to cover and liner/leachate collection system performance. However for HW disposal alone under RCRA the design standards are typically considered sufficient by the regulators without a requirement to assess long-term performance thus avoiding the need to consider the details addressed in this report. This report provides suggestions for a general approach to address covers and liners/leachate collection systems in a DOE Order 435.1 PA and how to integrate assessments with defense-in-depth considerations such as design, operations, and waste acceptance criteria to address uncertainties. The emphasis is on water balances and management in such assessments. Specific information and references are provided for details needed to address the evolution of individual components of cover and liner/leachate collection systems. This information was then synthesized into suggestions for best practices for cover and liner system design and examples of approaches to address the performance of covers and liners as part of a performance assessment of the disposal system. Numerous references are provided for sources of information to help describe the basis for performance of individual components of cover and liner systems.« less

The role of impulse parameters in force variability

NASA Technical Reports Server (NTRS)

Carlton, L. G.; Newell, K. M.

1986-01-01

One of the principle limitations of the human motor system is the ability to produce consistent motor responses. When asked to repeatedly make the same movement, performance outcomes are characterized by a considerable amount of variability. This occurs whether variability is expressed in terms of kinetics or kinematics. Variability in performance is of considerable importance because for tasks requiring accuracy it is a critical variable in determining the skill of the performer. What has long been sought is a description of the parameter or parameters that determine the degree of variability. Two general experimental protocals were used. One protocal is to use dynamic actions and record variability in kinematic parameters such as spatial or temporal error. A second strategy was to use isometric actions and record kinetic variables such as peak force produced. What might be the important force related factors affecting variability is examined and an experimental approach to examine the influence of each of these variables is provided.

Thermal hydraulic feasibility assessment of the hot conditioning system and process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heard, F.J.

1996-10-10

The Spent Nuclear Fuel Project was established to develop engineered solutions for the expedited removal, stabilization, and storage of spent nuclear fuel from the K Basins at the U.S. Department of Energy`s Hanford Site in Richland, Washington. A series of analyses have been completed investigating the thermal-hydraulic performance and feasibility of the proposed Hot Conditioning System and process for the Spent Nuclear Fuel Project. The analyses were performed using a series of thermal-hydraulic models that could respond to all process and safety-related issues that may arise pertaining to the Hot Conditioning System. The subject efforts focus on independently investigating, quantifying,more » and establishing the governing heat production and removal mechanisms, flow distributions within the multi-canister overpack, and performing process simulations for various purge gases under consideration for the Hot Conditioning System, as well as obtaining preliminary results for comparison with and verification of other analyses, and providing technology- based recommendations for consideration and incorporation into the Hot Conditioning System design bases.« less

Alternative approaches to vertebrate ecotoxicity tests in the 21st century: A review of developments over the last 2 decades and current status

USGS Publications Warehouse

Lillicrap, Adam; Belanger, Scott; Burden, Natalie; Du Pasquier, David; Embry, Michelle; Halder, Marlies; Lampi, Mark; Lee, Lucy; Norberg-King, Teresa J.; Rattner, Barnett A.; Schirmer, Kristin; Thomas, Paul

2016-01-01

The need for alternative approaches to the use of vertebrate animals for hazard assessment of chemicals and pollutants has become of increasing importance. It is now the first consideration when initiating a vertebrate ecotoxicity test, to ensure that unnecessary use of vertebrate organisms is minimized wherever possible. For some regulatory purposes, the use of vertebrate organisms for environmental risk assessments has been banned; in other situations, the number of organisms tested has been dramatically reduced or the severity of the procedure refined. However, there is still a long way to go to achieve a complete replacement of vertebrate organisms to generate environmental hazard data. The development of animal alternatives is based not just on ethical considerations but also on reducing the cost of performing vertebrate ecotoxicity tests and in some cases on providing better information aimed at improving environmental risk assessments. The present Focus article provides an overview of the considerable advances that have been made toward alternative approaches for ecotoxicity assessments over the last few decades.

Optical System Design for the Next Generation Space Telescope

NASA Technical Reports Server (NTRS)

Solomon, Leonard H. (Principal Investigator); Kahan, Mark A.

1996-01-01

This report provides considerations and suggested approaches for design of the Optical Telescope Assembly and the segmented primary mirror of a Next Generation Space Telescope (NGST). Based on prior studies and hardware development, we provide data and design information on low-risk materials and hardware configurations most likely to meet low weight, low temperature and long-life requirements of the nominal 8-meter aperture NGST. We also provide preliminary data for cost and performance trades, and recommendations for technology development and demonstration required to support the system design effort.

Hydrotherapy in burn care: a survey of hydrotherapy practices in the UK and Ireland and literature review.

PubMed

Langschmidt, Jenna; Caine, Paul L; Wearn, Christopher M; Bamford, Amy; Wilson, Yvonne T; Moiemen, Naiem S

2014-08-01

Hydrotherapy is widely used in burns management however there are risks associated with its use, in particular cross-infection. Data regarding indications and techniques in common use is deficient. This study aimed to investigate hydrotherapy practices in the UK and Ireland. A survey of the hydrotherapy practice of major burn care providers was performed by e mail and where necessary, follow up telephone contact. The survey included 28 burn care providers. 27 reported using hydrotherapy. Only 11 (41%) had defined indication criteria with 4 (15%) implementing a specific protocol. Variations in hydrotherapy practice were seen. Hydrotherapy is used nationwide, however considerable variation in practice exists. One area worthy of further consideration is the need for appropriate standards of infection control. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Approaches to consider covers and liners in a low-level waste disposal facility performance assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seitz, Roger; Phifer, Mark; Suttora, Linda

2015-03-17

On-site disposal cells are in use and being considered at several USDOE sites as the final disposition for large amounts of waste associated with cleanup of contaminated areas and facilities. These disposal cells are typically regulated by States and/or the USEPA in addition to having to comply with requirements in DOE Order 435.1, Radioactive Waste Management. The USDOE-EM Office of Site Restoration formed a working group to foster improved communication and sharing of information for personnel associated with these Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) disposal cells and work towards more consistent assumptions, as appropriate, for technical andmore » policy considerations related to performance and risk assessments in support of a Record of Decision and Disposal Authorization Statement. One task completed by the working group addressed approaches for considering the performance of covers and liners/leachate collection systems in the context of a performance assessment (PA). A document has been prepared which provides recommendations for a general approach to address covers and liners/leachate collection systems in a PA and how to integrate assessments with defense-in-depth considerations such as design, operations and waste acceptance criteria to address uncertainties. Specific information and references are provided for details needed to address the evolution of individual components of cover and liner/leachate collection systems. This information is then synthesized into recommendations for best practices for cover and liner system design and examples of approaches to address the performance of covers and liners as part of a performance assessment of the disposal system.« less

Entry System Design Considerations for Mars Landers

NASA Technical Reports Server (NTRS)

Lockwood, Mary Kae; Powell, Richard W.; Graves, Claude A.; Carman, Gilbert L.

2001-01-01

The objective for the next generation or Mars landers is to enable a safe landing at specific locations of scientific interest. The 1st generation entry, descent and landing systems, ex. Viking and Pathfinder, provided successful landing on Mars but by design were limited to large scale, 100s of km, landing sites with minimal local hazards. The 2 nd generation landers, or smart landers, will provide scientists with access to previously unachievable landing sites by providing precision landing to less than 10 km of a target landing site, with the ability to perform local hazard avoidance, and provide hazard tolerance. This 2nd generation EDL system can be utilized for a range of robotic missions with vehicles sized for science payloads from the small 25-70 kg, Viking, Pathfinder, Mars Polar Lander and Mars Exploration Rover-class, to the large robotic Mars Sample Return, 300 kg plus, science payloads. The 2nd generation system can also be extended to a 3nd generation EDL system with pinpoint landing, 10's of meters of landing accuracy, for more capable robotic or human missions. This paper will describe the design considerations for 2nd generation landers. These landers are currently being developed by a consortium of NASA centers, government agencies, industry and academic institutions. The extension of this system and additional considerations required for a 3nd generation human mission to Mars will be described.

Cabin fuselage structural design with engine installation and control system

NASA Technical Reports Server (NTRS)

Balakrishnan, Tanapaal; Bishop, Mike; Gumus, Ilker; Gussy, Joel; Triggs, Mike

1994-01-01

Design requirements for the cabin, cabin system, flight controls, engine installation, and wing-fuselage interface that provide adequate interior volume for occupant seating, cabin ingress and egress, and safety are presented. The fuselage structure must be sufficient to meet the loadings specified in the appropriate sections of Federal Aviation Regulation Part 23. The critical structure must provide a safe life of 10(exp 6) load cycles and 10,000 operational mission cycles. The cabin seating and controls must provide adjustment to account for various pilot physiques and to aid in maintenance and operation of the aircraft. Seats and doors shall not bind or lockup under normal operation. Cabin systems such as heating and ventilation, electrical, lighting, intercom, and avionics must be included in the design. The control system will consist of ailerons, elevator, and rudders. The system must provide required deflections with a combination of push rods, bell cranks, pulleys, and linkages. The system will be free from slack and provide smooth operation without binding. Environmental considerations include variations in temperature and atmospheric pressure, protection against sand, dust, rain, humidity, ice, snow, salt/fog atmosphere, wind and gusts, and shock and vibration. The following design goals were set to meet the requirements of the statement of work: safety, performance, manufacturing and cost. To prevent the engine from penetrating the passenger area in the event of a crash was the primary safety concern. Weight and the fuselage aerodynamics were the primary performance concerns. Commonality and ease of manufacturing were major considerations to reduce cost.

Preliminary study of ground handling characteristics of Buoyant Quad Rotor (BQR) vehicles

NASA Technical Reports Server (NTRS)

Browning, R. G. E.

1980-01-01

A preliminary investigation of mooring concepts appropriate for heavy lift buoyant quad rotor (BQR) vehicles was performed. A review of the evolution of ground handling systems and procedures for all airship types is presented to ensure that appropriate consideration is given to past experiences. Two buoyant quad rotor designs are identified and described. An analysis of wind loads on a moored airship and the effects of these loads on vehicle design is provided. Four mooring concepts are assessed with respect to the airship design, wind loads and mooring site considerations. Basing requirements and applicability of expeditionary mooring at various operational scenarios are addressed.

Primary cerebral lymphoma: clinical and aeromedical considerations.

PubMed

Storms, Patrick R

2007-04-01

Cancer, and the complications of cancer therapy, can present significant obstacles to the airman wishing to return to flying status. If found to be free of recurrent lymphoma and to be neurologically intact after completion of therapy, applicants can be considered for a time-limited medical certificate, provided that they are otherwise qualified. Long-term follow up of patients must include not only disease-free survival time, but also serial neuropsychometric evaluation and quality-of-life assessments. This case illustrates the aeromedical considerations and certification issues for a patient presenting with performance issues progressing to discreet neurological findings, culminating in the diagnosis and treatment of primary central nervous system (CNS) lymphoma.

Prisoners as Living Donors: A Vulnerabilities Analysis.

PubMed

Ross, Lainie Friedman; Thistlethwaite, J Richard

2018-01-01

Although national guidelines exist for evaluating the eligibility of potential living donors and for procuring their informed consent, no special protections or considerations exist for potential living donors who are incarcerated. Human research subject protections in the United States are codified in the Federal Regulations, 45 CFR 46, and special protections are given to prisoners. Living donor transplantation has parallels with human subject research in that both activities are performed with the primary goal of benefiting third parties. In this article, we describe what special considerations should be provided to prisoners as potential living donors using a vulnerabilities approach adapted from the human research subject protection literature.

Electrodynamic tethers for energy conversion

NASA Technical Reports Server (NTRS)

Nobles, W.

1986-01-01

Conductive tethers have been proposed as a new method for converting orbital mechanical energy into electrical power for use on-board a satellite (generator mode) or conversely (motor mode) as a method of providing electric propulsion using electrical energy from the satellite. The operating characteristics of such systems are functionally dependent on orbit altitude and inclination. Effects of these relationships are examined to determine acceptable regions of application. To identify system design considerations, a specific set of system performance goals and requirements are selected. The case selected is for a 25 kW auxiliary power system for use on Space Station. Appropriate system design considerations are developed, and the resulting system is described.

Image analysis of the AXAF VETA-I x ray mirror

NASA Technical Reports Server (NTRS)

Freeman, Mark D.; Hughes, John P; Vanspeybroeck, L.; Weisskopf, M.; Bilbro, J.

1992-01-01

Initial core scan data of the VETA-I x-ray mirror proved disappointing, showing considerable unpredicted image structure and poor measured FWHM. 2-D core scans were performed, providing important insight into the nature of the distortion. Image deconvolutions using a ray traced model PSF was performed successfully to reinforce our conclusion regarding the origin of the astigmatism. A mechanical correction was made to the optical structure, and the mirror was tested successfully (FWHM 0.22 arcsec) as a result.

Children's Television Programming: Some Prior Considerations and Research Designs for Canadian Broadcasts.

ERIC Educational Resources Information Center

Solberg, Janet

This handbook was produced to address some of the questions raised at a workshop for producers, programmers, performers, researchers, and writers in the field of Canadian children's television. Three main areas are covered. The first section provides an indication of some of the information that research can supply for the improvement of…

Engineering study on the rotary-vee engine concept

NASA Technical Reports Server (NTRS)

Willis, Edward A.; Bartland, Timothy A.; Beard, John E.

1989-01-01

This paper provides a review of the applicable thermodynamic cycle and performance considerations when the rotary-vee mechanism is used as an internal combustion (IC) heat engine. Included is a simplified kinematic analysis and studies of the effects of design parameters on the critical pressures, torques and parasitic losses. A discussion of the principal findings is presented.

PPP/nonreal-time trajectory program interface requirements and capabilities

NASA Technical Reports Server (NTRS)

Mcgavern, J. L.; Arbet, J. D.

1975-01-01

The selection process for interfacing a nonreal time trajectory program with the procedures and performance program is outlined; the interface provides summary data timelines for any desired trajectory profile. Consideration was given to two separate digital programs for satisfying capabilities. One was the CDC 6400 digital program BANDITO, and the second was the UNIVAC 1110 SVDS program.

Quality assurance and quality improvement in U.S. clinical molecular genetic laboratories.

PubMed

Chen, Bin; Richards, C Sue; Wilson, Jean Amos; Lyon, Elaine

2011-04-01

A robust quality-assurance program is essential for laboratories that perform molecular genetic testing to maintain high-quality testing and be able to address challenges associated with performance or delivery of testing services as the use of molecular genetic tests continues to expand in clinical and public health practice. This unit discusses quality-assurance and quality-improvement considerations that are critical for molecular genetic testing performed for heritable diseases and conditions. Specific discussion is provided on applying regulatory standards and best practices in establishing/verifying test performance, ensuring quality of the total testing process, monitoring and maintaining personnel competency, and continuing quality improvement. The unit provides a practical reference for laboratory professionals to use in recognizing and addressing essential quality-assurance issues in human molecular genetic testing. It should also provide useful information for genetics researchers, trainees, and fellows in human genetics training programs, as well as others who are interested in quality assurance and quality improvement for molecular genetic testing. 2011 by John Wiley & Sons, Inc.

Intelligent Life-Extending Controls for Aircraft Engines

NASA Technical Reports Server (NTRS)

Guo, Ten-Huei; Chen, Philip; Jaw, Link

2005-01-01

Aircraft engine controllers are designed and operated to provide desired performance and stability margins. The purpose of life-extending-control (LEC) is to study the relationship between control action and engine component life usage, and to design an intelligent control algorithm to provide proper trade-offs between performance and engine life usage. The benefit of this approach is that it is expected to maintain safety while minimizing the overall operating costs. With the advances of computer technology, engine operation models, and damage physics, it is necessary to reevaluate the control strategy fro overall operating cost consideration. This paper uses the thermo-mechanical fatigue (TMF) of a critical component to demonstrate how an intelligent engine control algorithm can drastically reduce the engine life usage with minimum sacrifice in performance. A Monte Carlo simulation is also performed to evaluate the likely engine damage accumulation under various operating conditions. The simulation results show that an optimized acceleration schedule can provide a significant life saving in selected engine components.

Synthetic Vision Systems - Operational Considerations Simulation Experiment

NASA Technical Reports Server (NTRS)

Kramer, Lynda J.; Williams, Steven P.; Bailey, Randall E.; Glaab, Louis J.

2007-01-01

Synthetic vision is a computer-generated image of the external scene topography that is generated from aircraft attitude, high-precision navigation information, and data of the terrain, obstacles, cultural features, and other required flight information. A synthetic vision system (SVS) enhances this basic functionality with real-time integrity to ensure the validity of the databases, perform obstacle detection and independent navigation accuracy verification, and provide traffic surveillance. Over the last five years, NASA and its industry partners have developed and deployed SVS technologies for commercial, business, and general aviation aircraft which have been shown to provide significant improvements in terrain awareness and reductions in the potential for Controlled-Flight-Into-Terrain incidents/accidents compared to current generation cockpit technologies. It has been hypothesized that SVS displays can greatly improve the safety and operational flexibility of flight in Instrument Meteorological Conditions (IMC) to a level comparable to clear-day Visual Meteorological Conditions (VMC), regardless of actual weather conditions or time of day. An experiment was conducted to evaluate SVS and SVS-related technologies as well as the influence of where the information is provided to the pilot (e.g., on a Head-Up or Head-Down Display) for consideration in defining landing minima based upon aircraft and airport equipage. The "operational considerations" evaluated under this effort included reduced visibility, decision altitudes, and airport equipage requirements, such as approach lighting systems, for SVS-equipped aircraft. Subjective results from the present study suggest that synthetic vision imagery on both head-up and head-down displays may offer benefits in situation awareness; workload; and approach and landing performance in the visibility levels, approach lighting systems, and decision altitudes tested.

Synthetic vision systems: operational considerations simulation experiment

NASA Astrophysics Data System (ADS)

Kramer, Lynda J.; Williams, Steven P.; Bailey, Randall E.; Glaab, Louis J.

2007-04-01

Synthetic vision is a computer-generated image of the external scene topography that is generated from aircraft attitude, high-precision navigation information, and data of the terrain, obstacles, cultural features, and other required flight information. A synthetic vision system (SVS) enhances this basic functionality with real-time integrity to ensure the validity of the databases, perform obstacle detection and independent navigation accuracy verification, and provide traffic surveillance. Over the last five years, NASA and its industry partners have developed and deployed SVS technologies for commercial, business, and general aviation aircraft which have been shown to provide significant improvements in terrain awareness and reductions in the potential for Controlled-Flight-Into-Terrain incidents / accidents compared to current generation cockpit technologies. It has been hypothesized that SVS displays can greatly improve the safety and operational flexibility of flight in Instrument Meteorological Conditions (IMC) to a level comparable to clear-day Visual Meteorological Conditions (VMC), regardless of actual weather conditions or time of day. An experiment was conducted to evaluate SVS and SVS-related technologies as well as the influence of where the information is provided to the pilot (e.g., on a Head-Up or Head-Down Display) for consideration in defining landing minima based upon aircraft and airport equipage. The "operational considerations" evaluated under this effort included reduced visibility, decision altitudes, and airport equipage requirements, such as approach lighting systems, for SVS-equipped aircraft. Subjective results from the present study suggest that synthetic vision imagery on both head-up and head-down displays may offer benefits in situation awareness; workload; and approach and landing performance in the visibility levels, approach lighting systems, and decision altitudes tested.

Development of low-shock pyrotechnic separation nuts. [design performance of flight type nuts

NASA Technical Reports Server (NTRS)

Bement, L. J.; Neubert, V. H.

1973-01-01

Performance demonstrations and comparisons were made on six flight type pyrotechnic separation nut designs, two of which are standard designs in current use, and four of which were designed to produce low shock on actuation. Although the shock performances of the four low shock designs are considerably lower than the standard designs, some penalties may be incurred in increased volume, weight, or complexity. These nuts, and how they are installed, can significantly influence the pyrotechnic shock created in spacecraft structures. A high response monitoring system has been developed and demonstrated to provide accurate performance comparisons for pyrotechnic separation nuts.

Toward an understanding of the neural mechanisms underlying dual-task performance: Contribution of comparative approaches using animal models.

PubMed

Watanabe, Kei; Funahashi, Shintaro

2018-01-01

The study of dual-task performance in human subjects has received considerable interest in cognitive neuroscience because it can provide detailed insights into the neural mechanisms underlying higher-order cognitive control. Despite many decades of research, our understanding of the neurobiological basis of dual-task performance is still limited, and some critical questions are still under debate. Recently, behavioral and neurophysiological studies of dual-task performance in animals have begun to provide intriguing evidence regarding how dual-task information is processed in the brain. In this review, we first summarize key evidence in neuroimaging and neuropsychological studies in humans and discuss possible reasons for discrepancies across studies. We then provide a comprehensive review of the literature on dual-task studies in animals and provide a novel working hypothesis that may reconcile the divergent results in human studies toward a unified view of the mechanisms underlying dual-task processing. Finally, we propose possible directions for future dual-task experiments in the framework of comparative cognitive neuroscience. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

New Frontiers AO: Advanced Materials Bi-propellant Rocket (AMBR) Engine Information Summary

NASA Technical Reports Server (NTRS)

Liou, Larry C.

2008-01-01

The Advanced Material Bi-propellant Rocket (AMBR) engine is a high performance (I(sub sp)), higher thrust, radiation cooled, storable bi-propellant space engine of the same physical envelope as the High Performance Apogee Thruster (HiPAT(TradeMark)). To provide further information about the AMBR engine, this document provides details on performance, development, mission implementation, key spacecraft integration considerations, project participants and approach, contact information, system specifications, and a list of references. The In-Space Propulsion Technology (ISPT) project team at NASA Glenn Research Center (GRC) leads the technology development of the AMBR engine. Their NASA partners were Marshall Space Flight Center (MSFC) and Jet Propulsion Laboratory (JPL). Aerojet leads the industrial partners selected competitively for the technology development via the NASA Research Announcement (NRA) process.

Introduction: gendering socio cultural alcohol and drug research.

PubMed

Hensing, G; Spak, F

2009-01-01

The gender gap in alcohol consumption and alcohol-related harm still is considerable and largely unexplained. This paper introduces four studies performed in Sweden that explore factors influencing gender differences in levels of consumption, adverse consequences and treatment. We summarize and discuss these four studies performed within the same cultural setting, which each analyse interaction with the gender. Two studies focus on the individual level addressing criminal behaviour, alcohol problems and mortality, and gender identity and alcohol problems in women taking psychiatric co-morbidity into account. Two studies focus on the institutional and cultural levels addressing the handling of alcohol-related problems in primary healthcare and the effectiveness of using cultural analysis in identifying gender concerns for women. Future studies need to focus more on these complex associations to secure that treatment settings provide both genders with fair and adequate treatment of high quality and that prevention activities will start to test measures that take gender into consideration.

DS-CDMA satellite diversity reception for personal satellite communication: Downlink performance analysis

NASA Technical Reports Server (NTRS)

DeGaudenzi, Riccardo; Giannetti, Filippo

1995-01-01

The downlink of a satellite-mobile personal communication system employing power-controlled Direct Sequence Code Division Multiple Access (DS-CDMA) and exploiting satellite-diversity is analyzed and its performance compared with a more traditional communication system utilizing single satellite reception. The analytical model developed has been thoroughly validated by means of extensive Monte Carlo computer simulations. It is shown how the capacity gain provided by diversity reception shrinks considerably in the presence of increasing traffic or in the case of light shadowing conditions. Moreover, the quantitative results tend to indicate that to combat system capacity reduction due to intra-system interference, no more than two satellites shall be active over the same region. To achieve higher system capacity, differently from terrestrial cellular systems, Multi-User Detection (MUD) techniques are likely to be required in the mobile user terminal, thus considerably increasing its complexity.

Comparison of Non-Invasive Individual Monitoring of the Training and Health of Athletes with Commercially Available Wearable Technologies

PubMed Central

Düking, Peter; Hotho, Andreas; Holmberg, Hans-Christer; Fuss, Franz Konstantin; Sperlich, Billy

2016-01-01

Athletes adapt their training daily to optimize performance, as well as avoid fatigue, overtraining and other undesirable effects on their health. To optimize training load, each athlete must take his/her own personal objective and subjective characteristics into consideration and an increasing number of wearable technologies (wearables) provide convenient monitoring of various parameters. Accordingly, it is important to help athletes decide which parameters are of primary interest and which wearables can monitor these parameters most effectively. Here, we discuss the wearable technologies available for non-invasive monitoring of various parameters concerning an athlete's training and health. On the basis of these considerations, we suggest directions for future development. Furthermore, we propose that a combination of several wearables is most effective for accessing all relevant parameters, disturbing the athlete as little as possible, and optimizing performance and promoting health. PMID:27014077

Design considerations for eye-safe single-aperture laser radars

NASA Astrophysics Data System (ADS)

Starodubov, D.; McCormick, K.; Volfson, L.

2015-05-01

The design considerations for low cost, shock resistant, compact and efficient laser radars and ranging systems are discussed. The reviewed approach with single optical aperture allows reducing the size, weight and power of the system. Additional design benefits include improved stability, reliability and rigidity of the overall system. The proposed modular architecture provides simplified way of varying the performance parameters of the range finder product family by selecting the sets of specific illumination and detection modules. The performance operation challenges are presented. The implementation of non-reciprocal optical elements is considered. The cross talk between illumination and detection channels for single aperture design is reviewed. 3D imaging capability for the ranging applications is considered. The simplified assembly and testing process for single aperture range finders that allows to mass produce the design are discussed. The eye safety of the range finder operation is summarized.

Effect of patient selection method on provider group performance estimates.

PubMed

Thorpe, Carolyn T; Flood, Grace E; Kraft, Sally A; Everett, Christine M; Smith, Maureen A

2011-08-01

Performance measurement at the provider group level is increasingly advocated, but different methods for selecting patients when calculating provider group performance have received little evaluation. We compared 2 currently used methods according to characteristics of the patients selected and impact on performance estimates. We analyzed Medicare claims data for fee-for-service beneficiaries with diabetes ever seen at an academic multispeciality physician group in 2003 to 2004. We examined sample size, sociodemographics, clinical characteristics, and receipt of recommended diabetes monitoring in 2004 for the groups of patients selected using 2 methods implemented in large-scale performance initiatives: the Plurality Provider Algorithm and the Diabetes Care Home method. We examined differences among discordantly assigned patients to determine evidence for differential selection regarding these measures. Fewer patients were selected under the Diabetes Care Home method (n=3558) than the Plurality Provider Algorithm (n=4859). Compared with the Plurality Provider Algorithm, the Diabetes Care Home method preferentially selected patients who were female, not entitled because of disability, older, more likely to have hypertension, and less likely to have kidney disease and peripheral vascular disease, and had lower levels of predicted utilization. Diabetes performance was higher under Diabetes Care Home method, with 67% versus 58% receiving >1 A1c tests, 70% versus 65% receiving ≥1 low-density lipoprotein (LDL) test, and 38% versus 37% receiving an eye examination. The method used to select patients when calculating provider group performance may affect patient case mix and estimated performance levels, and warrants careful consideration when comparing performance estimates.

From mission to measures: performance measure development for a Teen Pregnancy Prevention Program.

PubMed

Farb, Amy Feldman; Burrus, Barri; Wallace, Ina F; Wilson, Ellen K; Peele, John E

2014-03-01

The Office of Adolescent Health (OAH) sought to create a comprehensive set of performance measures to capture the performance of the Teen Pregnancy Prevention (TPP) program. This performance measurement system needed to provide measures that could be used internally (by both OAH and the TPP grantees) for management and program improvement as well as externally to communicate the program's progress to other interested stakeholders and Congress. This article describes the selected measures and outlines the considerations behind the TPP measurement development process. Issues faced, challenges encountered, and lessons learned have broad applicability for other federal agencies and, specifically, for TPP programs interested in assessing their own performance and progress. Published by Elsevier Inc.

Analyze satellite-tracking laser data in order to study satellite ephemerides, solid-Earth and ocean tides and laser system performance

NASA Technical Reports Server (NTRS)

Gaposchkin, E. M.

1981-01-01

The decrease in the semimajor axis of Lageos is considerably larger than expected. Gravitational effects, reference system effects, solar radiation pressure, Earth albedo pressure, neutral atmospheric drag, the Poynting Robertson Effect, and electrodynamic effects were used in explaining the observations. Quick look data provided are used to determine the Earth's polar motion and length of day. This process is routine, and provides these geophysical data every five days.

Perceived barriers to effective implementation of public reporting of hospital performance data in Australia: a qualitative study.

PubMed

Canaway, Rachel; Bismark, Marie; Dunt, David; Kelaher, Margaret

2017-06-07

Public reporting of government funded (public) hospital performance data was mandated in Australia in 2011. Studies suggest some benefit associated with such public reporting, but also considerable scope to improve reporting systems. In 2015, a purposive sample of 41 expert informants were interviewed, representing consumer, provider and purchasers perspectives across Australia's public and private health sectors, to ascertain expert opinion on the utility and impact of public reporting of health service performance. Qualitative data was thematically analysed with a focus on reporting perceived strengths and barriers to public reporting of hospital performance data (PR). Many more weaknesses and barriers to PR were identified than strengths. Barriers were: conceptual (unclear objective, audience and reporting framework); systems-level (including lack of consumer choice, lack of consumer and clinician involvement, jurisdictional barriers, lack of mandate for private sector reporting); technical and resource related (including data complexity, lack of data relevance consistency, rigour); and socio-cultural (including provider resistance to public reporting, poor consumer health literacy, lack of consumer empowerment). Perceptions of the Australian experience of PR highlight important issues in its implementation that can provide lessons for Australia and elsewhere. A considerable weakness of PR in Australia is that the public are often not considered its major audience, resulting in information ineffectually framed to meet the objective of PR informing consumer decision-making about treatment options. Greater alignment is needed between the primary objective of PR, its audience and audience needs; more than one system of PR might be necessary to meet different audience needs and objectives. Further research is required to assess objectively the potency of the barriers to PR suggested by our panel of informants.

Progress on high-performance rapid prototype aluminum mirrors

NASA Astrophysics Data System (ADS)

Woodard, Kenneth S.; Myrick, Bruce H.

2017-05-01

Near net shape parts can be produced using some very old processes (investment casting) and the relatively new direct metal laser sintering (DMLS) process. These processes have significant advantages for complex blank lightweighting and costs but are not inherently suited for producing high performance mirrors. The DMLS process can provide extremely complex lightweight structures but the high residual stresses left in the material results in unstable mirror figure retention. Although not to the extreme intricacy of DMLS, investment casting can also provide complex lightweight structures at considerably lower costs than DMLS and even conventional wrought mirror blanks but the less than 100% density for casting (and also DMLS) limits finishing quality. This paper will cover the progress that has been made to make both the DMLS and investment casting processes into viable near net shape blank options for high performance aluminum mirrors. Finish and figure results will be presented to show performance commensurate with existing conventional processes.

40 CFR 194.33 - Consideration of drilling events in performance assessments.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Consideration of drilling events in... and Re-certification Containment Requirements § 194.33 Consideration of drilling events in performance... shall be used in assessing the likelihood and consequences of drilling events, and the results of such...

40 CFR 194.33 - Consideration of drilling events in performance assessments.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Consideration of drilling events in... and Re-certification Containment Requirements § 194.33 Consideration of drilling events in performance... shall be used in assessing the likelihood and consequences of drilling events, and the results of such...

40 CFR 194.33 - Consideration of drilling events in performance assessments.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Consideration of drilling events in... and Re-certification Containment Requirements § 194.33 Consideration of drilling events in performance... shall be used in assessing the likelihood and consequences of drilling events, and the results of such...

40 CFR 194.33 - Consideration of drilling events in performance assessments.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Consideration of drilling events in... and Re-certification Containment Requirements § 194.33 Consideration of drilling events in performance... shall be used in assessing the likelihood and consequences of drilling events, and the results of such...

A rate-constrained fast full-search algorithm based on block sum pyramid.

PubMed

Song, Byung Cheol; Chun, Kang-Wook; Ra, Jong Beom

2005-03-01

This paper presents a fast full-search algorithm (FSA) for rate-constrained motion estimation. The proposed algorithm, which is based on the block sum pyramid frame structure, successively eliminates unnecessary search positions according to rate-constrained criterion. This algorithm provides the identical estimation performance to a conventional FSA having rate constraint, while achieving considerable reduction in computation.

Type Specialization in Aldor

NASA Astrophysics Data System (ADS)

Dragan, Laurentiu; Watt, Stephen M.

Computer algebra in scientific computation squarely faces the dilemma of natural mathematical expression versus efficiency. While higher-order programming constructs and parametric polymorphism provide a natural and expressive language for mathematical abstractions, they can come at a considerable cost. We investigate how deeply nested type constructions may be optimized to achieve performance similar to that of hand-tuned code written in lower-level languages.

Wisconsin's study of manned Mars missions

NASA Technical Reports Server (NTRS)

1987-01-01

The design group focused on three topics: (1) Extravehicular Activities, (2) Sample Return Missions, and (3) Structural and Construction Considerations of a Manned Mars Habitat. Extravehicular Activities permit a Mars based astronaut to exit the habitat and perform mission activities in the harsh Mars environment. Today's spacesuit gloves are bulky, hard to manipulate and fatiguing. A mechanical assistance mechanism has been developed for the glove that will reduce user fatigue and increase the duration of EVA's. Oxygen supply systems are also being developed for the EVA astronaut. A scuba type system of tanked breathing air proves to be the most efficient system for short duration EVA's. A system that extracts the oxygen from atmospheric carbon dioxide can provide oxygen for long duration FVA's. Sample Return Missions require that samples be taken from several sites. Transportation considerations are addressed and two transportation schemes are proposed. The first scheme involves a lighter than air balloon. This system provides excellent range. The second design is a rover that uses tracks rather than wheels. Track rovers perform well in soft, sandy conditions. Engineering aspects of a habitat and domed greenhouse were investigated and plans for the habitat have been made. A configuration has been established and construction details have been made.

Alternative approaches to vertebrate ecotoxicity tests in the 21st century: A review of developments over the last 2 decades and current status.

PubMed

Lillicrap, Adam; Belanger, Scott; Burden, Natalie; Pasquier, David Du; Embry, Michelle R; Halder, Marlies; Lampi, Mark A; Lee, Lucy; Norberg-King, Teresa; Rattner, Barnett A; Schirmer, Kristin; Thomas, Paul

2016-11-01

The need for alternative approaches to the use of vertebrate animals for hazard assessment of chemicals and pollutants has become of increasing importance. It is now the first consideration when initiating a vertebrate ecotoxicity test, to ensure that unnecessary use of vertebrate organisms is minimized wherever possible. For some regulatory purposes, the use of vertebrate organisms for environmental risk assessments has been banned; in other situations, the number of organisms tested has been dramatically reduced or the severity of the procedure refined. However, there is still a long way to go to achieve a complete replacement of vertebrate organisms to generate environmental hazard data. The development of animal alternatives is based not just on ethical considerations but also on reducing the cost of performing vertebrate ecotoxicity tests and in some cases on providing better information aimed at improving environmental risk assessments. The present Focus article provides an overview of the considerable advances that have been made toward alternative approaches for ecotoxicity assessments over the last few decades. Environ Toxicol Chem 2016;35:2637-2646. © 2016 SETAC. © 2016 SETAC.

Using Risk Assessment Methodologies to Meet Management Objectives

NASA Technical Reports Server (NTRS)

DeMott, D. L.

2015-01-01

Current decision making involves numerous possible combinations of technology elements, safety and health issues, operational aspects and process considerations to satisfy program goals. Identifying potential risk considerations as part of the management decision making process provides additional tools to make more informed management decision. Adapting and using risk assessment methodologies can generate new perspectives on various risk and safety concerns that are not immediately apparent. Safety and operational risks can be identified and final decisions can balance these considerations with cost and schedule risks. Additional assessments can also show likelihood of event occurrence and event consequence to provide a more informed basis for decision making, as well as cost effective mitigation strategies. Methodologies available to perform Risk Assessments range from qualitative identification of risk potential, to detailed assessments where quantitative probabilities are calculated. Methodology used should be based on factors that include: 1) type of industry and industry standards, 2) tasks, tools, and environment 3) type and availability of data and 4) industry views and requirements regarding risk & reliability. Risk Assessments are a tool for decision makers to understand potential consequences and be in a position to reduce, mitigate or eliminate costly mistakes or catastrophic failures.

Specific Consideration on Superior Performance and Evaluation Methods of Polymer-housed Surge Arresters

NASA Astrophysics Data System (ADS)

Ishizaki, Yoshihiro; Kobayashi, Misao; Suzuki, Hironori; Futagami, Koichi

It is very suitable to select the polymer materials for the housings of surge arresters (SAs), because the polymer materials are generally soft and light weight. Therefore, many kinds of polymer-housed SAs using various polymer materials have been developed, and expanding into many countries. Considering these backgrounds, the JEC technical report (JEC-TR) 23002-2008; polymer-housed surge arrester(1) has been established based on the existent relevant standards of arresters, such as JEC-2371-2003; Insulator-housed surge arresters(2) and IEC 60099-4 Edition 2.2, Metal-oxide surge arresters (MOSAs) without gaps for a.c. systems(3) in order to introduce the technology and provide a common guide for testing of polymer-housed SAs. According as the JEC-TR, the various new applications of the polymer-housed SAs, which are caused by superior advantages such as compact, light weight, safe failure mode, anti-seismic performance, anti-pollution performance and cost efficiency design, have been realized recently in Japan. Therefore, this paper gives specific consideration on the superior performance of the polymer-housed SAs and the evaluation methods of the polymer-housed SAs, because there are some issues in the existent standards to be solved.

Formal implementation of a performance evaluation model for the face recognition system.

PubMed

Shin, Yong-Nyuo; Kim, Jason; Lee, Yong-Jun; Shin, Woochang; Choi, Jin-Young

2008-01-01

Due to usability features, practical applications, and its lack of intrusiveness, face recognition technology, based on information, derived from individuals' facial features, has been attracting considerable attention recently. Reported recognition rates of commercialized face recognition systems cannot be admitted as official recognition rates, as they are based on assumptions that are beneficial to the specific system and face database. Therefore, performance evaluation methods and tools are necessary to objectively measure the accuracy and performance of any face recognition system. In this paper, we propose and formalize a performance evaluation model for the biometric recognition system, implementing an evaluation tool for face recognition systems based on the proposed model. Furthermore, we performed evaluations objectively by providing guidelines for the design and implementation of a performance evaluation system, formalizing the performance test process.

Human Factors Considerations for Area Navigation Departure and Arrival Procedures

NASA Technical Reports Server (NTRS)

Barhydt, Richard; Adams, Catherine A.

2006-01-01

Area navigation (RNAV) procedures are being implemented in the United States and around the world as part of a transition to a performance-based navigation system. These procedures are providing significant benefits and have also caused some human factors issues to emerge. Under sponsorship from the Federal Aviation Administration (FAA), the National Aeronautics and Space Administration (NASA) has undertaken a project to document RNAV-related human factors issues and propose areas for further consideration. The component focusing on RNAV Departure and Arrival Procedures involved discussions with expert users, a literature review, and a focused review of the NASA Aviation Safety Reporting System (ASRS) database. Issues were found to include aspects of air traffic control and airline procedures, aircraft systems, and procedure design. Major findings suggest the need for specific instrument procedure design guidelines that consider the effects of human performance. Ongoing industry and government activities to address air-ground communication terminology, design improvements, and chart-database commonality are strongly encouraged. A review of factors contributing to RNAV in-service errors would likely lead to improved system design and operational performance.

Environmental assessment of pavement infrastructure: A systematic review.

PubMed

Inyim, Peeraya; Pereyra, Jose; Bienvenu, Michael; Mostafavi, Ali

2016-07-01

Through a critical review and systematic analysis of pavement life cycle assessment (LCA) studies published over the past two decades, this study shows that the available information regarding the environmental impacts of pavement infrastructure is not sufficient to determine what pavement type is more environmentally sustainable. Limitations and uncertainties related to data, system boundary and functional unit definitions, consideration of use and maintenance phase impacts, are identified as the main reasons for inconsistency of reported results in pavement LCA studies. The study outcomes also highlight the need for advancement of knowledge pertaining to: (1) utilization of performance-adjusted functional units, (2) accurate estimation of use, maintenance, and end-of-life impacts, (3) incorporation of the dynamic and uncertain nature of pavement condition performance in impact assessment; (4) development of region-specific inventory data for impact estimation; and (5) consideration of a standard set of impact categories for comparison of environmental performance of different pavement types. Advancing the knowledge in these areas is critical in providing consistent and reliable results to inform decision-making toward more sustainable roadway infrastructure. Copyright © 2016 Elsevier Ltd. All rights reserved.

Improving Motor and Drive System Performance – A Sourcebook for Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This sourcebook outlines opportunities to improve motor and drive systems performance. The sourcebook is divided into four main sections: (1) Motor and Drive System Basics: Summarizes important terms, relationships, and system design considerations relating to motor and drive systems. (2) Performance Opportunity Road Map: Details the key components of well-functioning motor and drive systems and opportunities for energy performance opportunities. (3) Motor System Economics: Offers recommendations on how to propose improvement projects based on corporate priorities, efficiency gains, and financial payback periods. (4) Where to Find Help: Provides a directory of organizations associated with motors and drives, as well asmore » resources for additional information, tools, software, videos, and training opportunities.« less

Analysis of a planetary-rotation system for evaporated optical coatings.

PubMed

Oliver, J B

2016-10-20

The impact of planetary design considerations for optical coating deposition is analyzed, including the ideal number of planets, variations in system performance, and the deviation of planet motion from the ideal. System capacity is maximized for four planets, although substrate size can significantly influence this result. Guidance is provided in the design of high-performance deposition systems based on the relative impact of different error modes. Errors in planet mounting such that the planet surface is not perpendicular to the axis of rotation are particularly problematic, suggesting planetary design modifications would be appropriate.

Study of radar pulse compression for high resolution satellite altimetry

NASA Technical Reports Server (NTRS)

Dooley, R. P.; Nathanson, F. E.; Brooks, L. W.

1974-01-01

Pulse compression techniques are studied which are applicable to a satellite altimeter having a topographic resolution of + 10 cm. A systematic design procedure is used to determine the system parameters. The performance of an optimum, maximum likelihood processor is analysed, which provides the basis for modifying the standard split-gate tracker to achieve improved performance. Bandwidth considerations lead to the recommendation of a full deramp STRETCH pulse compression technique followed by an analog filter bank to separate range returns. The implementation of the recommended technique is examined.

MACRA, MIPS, and the New Medicare Quality Payment Program: An Update for Radiologists.

PubMed

Rosenkrantz, Andrew B; Nicola, Gregory N; Allen, Bibb; Hughes, Danny R; Hirsch, Joshua A

2017-03-01

The Medicare Access and CHIP Reauthorization Act (MACRA) of 2015 advances the goal of tying Medicare payments to quality and value. In April 2016, CMS published an initial proposed rule for MACRA, renaming it the Quality Payment Program (QPP). Under QPP, clinicians receive payments through either advanced alternative payment models or the Merit-Based Incentive Payment System (MIPS), a consolidation of existing federal performance programs that applies positive or negative adjustments to fee-for-service payments. Most physicians will participate in MIPS. This review highlights implications of the QPP and MIPS for radiologists. Although MIPS incorporates radiology-specific quality measures, radiologists will also be required to participate in other practice improvement activities, including patient engagement. Recognizing physicians' unique practice patterns, MIPS will provide special considerations in performance evaluation for physicians with limited face-to-face patient interaction. Although such considerations will affect radiologists' likelihood of success under QPP, many practitioners will be ineligible for the considerations under currently proposed criteria. Reporting using qualified clinical data registries will benefit radiologists' performance by allowing expanded arrays of MIPS and non-MIPS specialty-specific measures. A group practice reporting option will substantially reduce administrative burden but introduce new challenges by requiring uniform determination of patient-facing status and performance measurement for all of the group's physicians (diagnostic radiologists, interventional radiologists, and nonradiologists) under the same taxpayer identification number. Given that the initial MIPS performance period begins in 2017, radiologists must begin preparing for QPP and taking actions to ensure their future success under this new quality-based payment system. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Intrinsic Hardware Evolution for the Design and Reconfiguration of Analog Speed Controllers for a DC Motor

NASA Technical Reports Server (NTRS)

Gwaltney, David A.; Ferguson, Michael I.

2003-01-01

Evolvable hardware provides the capability to evolve analog circuits to produce amplifier and filter functions. Conventional analog controller designs employ these same functions. Analog controllers for the control of the shaft speed of a DC motor are evolved on an evolvable hardware platform utilizing a second generation Field Programmable Transistor Array (FPTA2). The performance of an evolved controller is compared to that of a conventional proportional-integral (PI) controller. It is shown that hardware evolution is able to create a compact design that provides good performance, while using considerably less functional electronic components than the conventional design. Additionally, the use of hardware evolution to provide fault tolerance by reconfiguring the design is explored. Experimental results are presented showing that significant recovery of capability can be made in the face of damaging induced faults.

JPL IGS Analysis Center Report, 2001-2003

NASA Technical Reports Server (NTRS)

Heflin, M. B.; Bar-Sever, Y. E.; Jefferson, D. C.; Meyer, R. F.; Newport, B. J.; Vigue-Rodi, Y.; Webb, F. H.; Zumberge, J. F.

2004-01-01

Three GPS orbit and clock products are currently provided by JPL for consideration by the IGS. Each differs in its latency and quality, with later results being more accurate. Results are typically available in both IGS and GIPSY formats via anonymous ftp. Current performance based on comparisons with the IGS final products is summarized. Orbit performance was determined by computing the 3D RMS difference between each JPL product and the IGS final orbits based on 15 minute estimates from the sp3 files. Clock performance was computed as the RMS difference after subtracting a linear trend based on 15 minute estimates from the sp3 files.

Development of the Second-Generation Oscillating Surge Wave Energy Converter with Variable Geometry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tom, Nathan M; Yu, Yi-Hsiang; Thresher, Robert W

This study investigates the effect of design changes on the hydrodynamics of a novel oscillating surge wave energy converter being developed at the National Renewable Energy Laboratory. The design utilizes controllable geometry features to shed structural loads while maintaining a rated power over a greater number of sea states. The second-generation design will seek to provide a more refined control of performance because the first-generation design demonstrated performance reductions considered too large for smooth power output. Performance is evaluated using frequency domain analysis with consideration of a nonideal power-take-off system, with respect to power absorption, foundation loads, and power-take-off torque.

Design considerations for divers' breathing gas systems

NASA Technical Reports Server (NTRS)

Hansen, O. R.

1972-01-01

Some of the design methods used to establish the gas storage, mixing, and transfer requirements for existing deep dive systems are discussed. Gas mixing systems appear essential to provide the low oxygen concentration mixtures within the converging tolerance range dictated by applications to increasing depths. Time related use of gas together with the performance of the gas transfer system insures a reasonable time frame for systems application.

FY2016 Update on ILAW Glass Testing for Disposal at IDF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, E. E.; Swanberg, D. J.; Muller, Isabelle S.

2017-04-12

This status report provides a FY2016 update on work performed to collect information on the corrosion behavior of LAW glasses to support the IDF PA. In addition to the development of the baseline operating envelope for the WTP, since 2003, VSL has developed a wide range of LAW formulations that achieve considerably higher waste loadings than the WTP baseline formulations.

The Role of Efficient XML Interchange (EXI) in Navy Wide-Area Network (WAN) Optimization

DTIC Science & Technology

2015-03-01

compress, and re-encrypt data to continue providing optimization through compression; however, that capability requires careful consideration of...optimization 23 of encrypted data requires a careful analysis and comparison of performance improvements and IA vulnerabilities. It is important...Contained EXI capitalizes on multiple techniques to improve compression, and they vary depending on a set of EXI options passed to the codec

Lunar concrete for construction

NASA Technical Reports Server (NTRS)

Cullingford, Hatice S.; Keller, M. Dean

1992-01-01

Feasibility of using concrete for lunar base construction was discussed recently without relevant data for the effects of vacuum on concrete. Our experimental studies performed earlier at Los Alamos have shown that concrete is stable in vacuum with no deterioration of its quality as measured by the compressive strength. Various considerations of using concrete successfully on the Moon are provided in this paper, along with specific conclusions from the existing database.

Guidance, Navigation, and Control Considerations for Nuclear Thermal Propulsion

NASA Technical Reports Server (NTRS)

Houts, Michael G.; Mitchell, Doyce P.; Kim, Tony

2015-01-01

The fundamental capability of Nuclear Thermal Propulsion (NTP) is game changing for space exploration. A first generation NTP system could provide high thrust at a specific impulse above 900 s, roughly double that of state of the art chemical engines. Characteristics of fission and NTP indicate that useful first generation systems will provide a foundation for future systems with extremely high performance. The role of a first generation NTP in the development of advanced nuclear propulsion systems could be analogous to the role of the DC-3 in the development of advanced aviation. Progress made under the NTP project could also help enable high performance fission power systems and Nuclear Electric Propulsion (NEP). Guidance, navigation, and control of NTP may have some unique but manageable characteristics.

Making health markets work better for poor people: the case of informal providers.

PubMed

Bloom, Gerald; Standing, Hilary; Lucas, Henry; Bhuiya, Abbas; Oladepo, Oladimeji; Peters, David H

2011-07-01

There has been a dramatic spread of market relationships in many low- and middle-income countries. This spread has been much faster than the development of the institutional arrangements to influence the performance of health service providers. In many countries poor people obtain a large proportion of their outpatient medical care and drugs from informal providers working outside a regulatory framework, with deleterious consequences in terms of the safety and efficacy of treatment and its cost. Interventions that focus only on improving the knowledge of these providers have had limited impact. There is a considerable amount of experience in other sectors with interventions for improving the performance of markets that poor people use. This paper applies lessons from this experience to the issue of informal providers, drawing on the findings of studies in Bangladesh and Nigeria. These studies analyse the markets for informal health care services in terms of the sources of health-related knowledge for the providers, the livelihood strategies of these providers and the institutional arrangements within which they build and maintain their reputation. The paper concludes that there is a need to build a systematic understanding of these markets to support collaboration between key actors in building institutional arrangements that provide incentives for better performance.

Performance data for a terrestrial solar photovoltaic/water electrolysis experiment

NASA Technical Reports Server (NTRS)

Costogue, E. N.; Yasui, R. K.

1977-01-01

A description is presented of the equipment used in the experiment, taking into account the surplus solar panel from the Mariner 4 spacecraft which was used as a solar array source and an electrolytic hydrogen generator. Attention is also given to operational considerations and performance data, system considerations and aspects of optimization, and large-scale hydrogen production considerations.

Risk-adjusted Outcomes of Clinically Relevant Pancreatic Fistula Following Pancreatoduodenectomy: A Model for Performance Evaluation.

PubMed

McMillan, Matthew T; Soi, Sameer; Asbun, Horacio J; Ball, Chad G; Bassi, Claudio; Beane, Joal D; Behrman, Stephen W; Berger, Adam C; Bloomston, Mark; Callery, Mark P; Christein, John D; Dixon, Elijah; Drebin, Jeffrey A; Castillo, Carlos Fernandez-Del; Fisher, William E; Fong, Zhi Ven; House, Michael G; Hughes, Steven J; Kent, Tara S; Kunstman, John W; Malleo, Giuseppe; Miller, Benjamin C; Salem, Ronald R; Soares, Kevin; Valero, Vicente; Wolfgang, Christopher L; Vollmer, Charles M

2016-08-01

To evaluate surgical performance in pancreatoduodenectomy using clinically relevant postoperative pancreatic fistula (CR-POPF) occurrence as a quality indicator. Accurate assessment of surgeon and institutional performance requires (1) standardized definitions for the outcome of interest and (2) a comprehensive risk-adjustment process to control for differences in patient risk. This multinational, retrospective study of 4301 pancreatoduodenectomies involved 55 surgeons at 15 institutions. Risk for CR-POPF was assessed using the previously validated Fistula Risk Score, and pancreatic fistulas were stratified by International Study Group criteria. CR-POPF variability was evaluated and hierarchical regression analysis assessed individual surgeon and institutional performance. There was considerable variability in both CR-POPF risk and occurrence. Factors increasing the risk for CR-POPF development included increasing Fistula Risk Score (odds ratio 1.49 per point, P < 0.00001) and octreotide (odds ratio 3.30, P < 0.00001). When adjusting for risk, performance outliers were identified at the surgeon and institutional levels. Of the top 10 surgeons (≥15 cases) for nonrisk-adjusted performance, only 6 remained in this high-performing category following risk adjustment. This analysis of pancreatic fistulas following pancreatoduodenectomy demonstrates considerable variability in both the risk and occurrence of CR-POPF among surgeons and institutions. Disparities in patient risk between providers reinforce the need for comprehensive, risk-adjusted modeling when assessing performance based on procedure-specific complications. Furthermore, beyond inherent patient risk factors, surgical decision-making influences fistula outcomes.

40 CFR 194.33 - Consideration of drilling events in performance assessments.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Consideration of drilling events in performance assessments. 194.33 Section 194.33 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... assessments. (a) Performance assessments shall examine deep drilling and shallow drilling that may potentially...

Communication Simulations for Power System Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fuller, Jason C.; Ciraci, Selim; Daily, Jeffrey A.

2013-05-29

New smart grid technologies and concepts, such as dynamic pricing, demand response, dynamic state estimation, and wide area monitoring, protection, and control, are expected to require considerable communication resources. As the cost of retrofit can be high, future power grids will require the integration of high-speed, secure connections with legacy communication systems, while still providing adequate system control and security. While considerable work has been performed to create co-simulators for the power domain with load models and market operations, limited work has been performed in integrating communications directly into a power domain solver. The simulation of communication and power systemsmore » will become more important as the two systems become more inter-related. This paper will discuss ongoing work at Pacific Northwest National Laboratory to create a flexible, high-speed power and communication system co-simulator for smart grid applications. The framework for the software will be described, including architecture considerations for modular, high performance computing and large-scale scalability (serialization, load balancing, partitioning, cross-platform support, etc.). The current simulator supports the ns-3 (telecommunications) and GridLAB-D (distribution systems) simulators. Ongoing and future work will be described, including planned future expansions for a traditional transmission solver. A test case using the co-simulator, utilizing a transactive demand response system created for the Olympic Peninsula and AEP gridSMART demonstrations, requiring two-way communication between distributed and centralized market devices, will be used to demonstrate the value and intended purpose of the co-simulation environment.« less

Commercial considerations in tissue engineering

PubMed Central

Mansbridge, Jonathan

2006-01-01

Tissue engineering is a field with immense promise. Using the example of an early tissue-engineered skin implant, Dermagraft, factors involved in the successful commercial development of devices of this type are explored. Tissue engineering has to strike a balance between tissue culture, which is a resource-intensive activity, and business considerations that are concerned with minimizing cost and maximizing customer convenience. Bioreactor design takes place in a highly regulated environment, so factors to be incorporated into the concept include not only tissue culture considerations but also matters related to asepsis, scaleup, automation and ease of use by the final customer. Dermagraft is an allogeneic tissue. Stasis preservation, in this case cryopreservation, is essential in allogeneic tissue engineering, allowing sterility testing, inventory control and, in the case of Dermagraft, a cellular stress that may be important for hormesis following implantation. Although the use of allogeneic cells provides advantages in manufacturing under suitable conditions, it raises the spectre of immunological rejection. Such rejection has not been experienced with Dermagraft. Possible reasons for this and the vision of further application of allogeneic tissues are important considerations in future tissue-engineered cellular devices. This review illustrates approaches that indicate some of the criteria that may provide a basis for further developments. Marketing is a further requirement for success, which entails understanding of the mechanism of action of the procedure, and is illustrated for Dermagraft. The success of a tissue-engineered product is dependent on many interacting operations, some discussed here, each of which must be performed simultaneously and well. PMID:17005024

Commercial considerations in tissue engineering.

PubMed

Mansbridge, Jonathan

2006-10-01

Tissue engineering is a field with immense promise. Using the example of an early tissue-engineered skin implant, Dermagraft, factors involved in the successful commercial development of devices of this type are explored. Tissue engineering has to strike a balance between tissue culture, which is a resource-intensive activity, and business considerations that are concerned with minimizing cost and maximizing customer convenience. Bioreactor design takes place in a highly regulated environment, so factors to be incorporated into the concept include not only tissue culture considerations but also matters related to asepsis, scaleup, automation and ease of use by the final customer. Dermagraft is an allogeneic tissue. Stasis preservation, in this case cryopreservation, is essential in allogeneic tissue engineering, allowing sterility testing, inventory control and, in the case of Dermagraft, a cellular stress that may be important for hormesis following implantation. Although the use of allogeneic cells provides advantages in manufacturing under suitable conditions, it raises the spectre of immunological rejection. Such rejection has not been experienced with Dermagraft. Possible reasons for this and the vision of further application of allogeneic tissues are important considerations in future tissue-engineered cellular devices. This review illustrates approaches that indicate some of the criteria that may provide a basis for further developments. Marketing is a further requirement for success, which entails understanding of the mechanism of action of the procedure, and is illustrated for Dermagraft. The success of a tissue-engineered product is dependent on many interacting operations, some discussed here, each of which must be performed simultaneously and well.

Minimum maximum temperature gradient coil design.

PubMed

While, Peter T; Poole, Michael S; Forbes, Larry K; Crozier, Stuart

2013-08-01

Ohmic heating is a serious problem in gradient coil operation. A method is presented for redesigning cylindrical gradient coils to operate at minimum peak temperature, while maintaining field homogeneity and coil performance. To generate these minimaxT coil windings, an existing analytic method for simulating the spatial temperature distribution of single layer gradient coils is combined with a minimax optimization routine based on sequential quadratic programming. Simulations are provided for symmetric and asymmetric gradient coils that show considerable improvements in reducing maximum temperature over existing methods. The winding patterns of the minimaxT coils were found to be heavily dependent on the assumed thermal material properties and generally display an interesting "fish-eye" spreading of windings in the dense regions of the coil. Small prototype coils were constructed and tested for experimental validation and these demonstrate that with a reasonable estimate of material properties, thermal performance can be improved considerably with negligible change to the field error or standard figures of merit. © 2012 Wiley Periodicals, Inc.

Health and productivity gains from better indoor environments and their relationship with building energy efficiency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisk, William J.

2000-04-01

Theoretical considerations and empirical data suggest that existing technologies and procedures can improve indoor environments in a manner that significantly increases productivity and health. Existing literature contains moderate to strong evidence that characteristics of buildings and indoor environments significantly influence rates of communicable respiratory illness, allergy and asthma symptoms, sick building symptoms, and worker performance. While there is considerable uncertainty in the estimates of the magnitudes of productivity gains that may be obtained by providing better indoor environments, the projected gains are very large. For the U.S., the estimated potential annual savings and productivity gains are $6 to $14 billionmore » from reduced respiratory disease, $2 to $4 billion from reduced allergies and asthma, $10 to $30 billion from reduced sick building syndrome symptoms, and $20 to $160 billion from direct improvements in worker performance that are unrelated to health. Productivity gains that are quantified and demonstrated could serve as a strong stimulus for energy efficiency measures that simultaneously improve the indoor environment.« less

Human Systems Integration: Unmanned Aircraft Control Station Certification Plan Guidance

NASA Technical Reports Server (NTRS)

2005-01-01

This document provides guidance to the FAA on important human factors considerations that can be used to support the certification of a UAS Aircraft Control Station (ACS). This document provides a synopsis of the human factors analysis, design and test activities to be performed to provide a basis for FAA certification. The data from these analyses, design activities, and tests, along with data from certification/qualification tests of other key components should be used to establish the ACS certification basis. It is expected that this information will be useful to manufacturers in developing the ACS Certification Plan,, and in supporting the design of their ACS.

Electrodeposited binder-free NiCo2O4@carbon nanofiber as a high performance anode for lithium ion batteries

NASA Astrophysics Data System (ADS)

Zhang, Jie; Chu, Ruixia; Chen, Yanli; Jiang, Heng; Zhang, Ying; Huang, Nay Ming; Guo, Hang

2018-03-01

Binder-free nickel cobaltite on a carbon nanofiber (NiCo2O4@CNF) anode for lithium ion batteries was prepared via a two-step procedure of electrospinning and electrodeposition. The CNF was obtained by annealing electrospun poly-acrylonitrile (PAN) in nitrogen (N2). The NiCo2O4 nanostructures were then grown on the CNF by electrodeposition, followed by annealing in air. Experimental results showed that vertically aligned NiCo2O4 nanosheets had uniformly grown on the surface of the CNF, forming an interconnected network. The NiCo2O4@CNF possessed considerable lithium storage capacity and cycling stability. It exhibited a high reversible capacity of 778 mAhg-1 after 300 cycles at a current density of 0.25 C (1 C = 890 mAg-1) with an average capacity loss rate of 0.05% per cycle. The NiCo2O4@CNF had considerable rate capacities, delivering a capacity of 350 mAhg-1 at a current density of 2.0 C. The outstanding electrochemical performance can be mainly attributed to the following: (1) The nanoscale structure of NiCo2O4 could not only shorten the diffusion path of lithium ions and electrons but also increase the specific surface area, providing more active sites for electrochemical reactions. (2) The CNF with considerable mechanical strength and electrical conductivity could function as an anchor for the NiCo2O4 nanostructure and ensure an efficient electron transfer. (3) The porous structure resulted in a high specific surface area and an effective buffer for the volume changes during the repeated charge-discharge processes. Compared with a conventional hydrothermal method, electrodeposition could significantly simplify the preparation of NiCo2O4, with a shorter preparation period and lower energy consumption. This work provides an alternative strategy to obtain a high performance anode for lithium ion batteries.

Macro-/Micro-Controlled 3D Lithium-Ion Batteries via Additive Manufacturing and Electric Field Processing.

PubMed

Li, Jie; Liang, Xinhua; Liou, Frank; Park, Jonghyun

2018-01-30

This paper presents a new concept for making battery electrodes that can simultaneously control macro-/micro-structures and help address current energy storage technology gaps and future energy storage requirements. Modern batteries are fabricated in the form of laminated structures that are composed of randomly mixed constituent materials. This randomness in conventional methods can provide a possibility of developing new breakthrough processing techniques to build well-organized structures that can improve battery performance. In the proposed processing, an electric field (EF) controls the microstructures of manganese-based electrodes, while additive manufacturing controls macro-3D structures and the integration of both scales. The synergistic control of micro-/macro-structures is a novel concept in energy material processing that has considerable potential for providing unprecedented control of electrode structures, thereby enhancing performance. Electrochemical tests have shown that these new electrodes exhibit superior performance in their specific capacity, areal capacity, and life cycle.

Examination of space/volume requirements for US underground coal mine refuge alternatives.

PubMed

Porter, William L; Dempsey, Patrick G; Jansky, Jacqueline H

2017-01-01

The Mine Safety and Health Administration requires that 1.4 m 2 (15 ft 2 ) of floor space is to be provided for each person inside a refuge alternative (RA). However, the amount of floor space needed for a person to reside inside an RA and perform basic tasks is unknown. During testing, participants entered into an RA or a simulated RA of various space/volume configurations and performed several simulated tasks that are representative of the survivability tasks performed within an RA. The results indicate that the floor space requirements were generally adequate for the tasks studied. Certain tasks such as changing scrubber cartridges, using toilets, and moving about the RA were impacted by the minimum height tested (0.6 m). As such, RAs of this height will require critical design consideration as a whole and the supplies provided for use inside of the RA to ensure the ability to use an RA.

A study of hear sink performance in air and soil for use in a thermoelectric energy harvesting device

NASA Technical Reports Server (NTRS)

Snyder, J.; Lawrence, E. E.

2002-01-01

A suggested application of a thermoelectric generator is to exploit the natural temperature difference between the air and the soil to generate small amounts of electrical energy. Since the conversion efficiency of even the best thermoelectric generators available is very low, the performance of the heat sinks providing the heat flow is critical. By providing a constant heat input to various heat sinks, field tests of their thermal conductances in soil and in air were performed. Aprototype device without a thermoelectric generator was constructed, buried, and monitored to experimentally measure the heat flow achievable in such a system. Theoretical considerations for design and selection of improved heat sinks are also presented. In particular, the method of shape factoranalysis is used to give rough estimates and upper bounds for the thermal conductance of a passive heat sink buried in soil.

Program optimizations: The interplay between power, performance, and energy

DOE PAGES

Leon, Edgar A.; Karlin, Ian; Grant, Ryan E.; ...

2016-05-16

Practical considerations for future supercomputer designs will impose limits on both instantaneous power consumption and total energy consumption. Working within these constraints while providing the maximum possible performance, application developers will need to optimize their code for speed alongside power and energy concerns. This paper analyzes the effectiveness of several code optimizations including loop fusion, data structure transformations, and global allocations. A per component measurement and analysis of different architectures is performed, enabling the examination of code optimizations on different compute subsystems. Using an explicit hydrodynamics proxy application from the U.S. Department of Energy, LULESH, we show how code optimizationsmore » impact different computational phases of the simulation. This provides insight for simulation developers into the best optimizations to use during particular simulation compute phases when optimizing code for future supercomputing platforms. Here, we examine and contrast both x86 and Blue Gene architectures with respect to these optimizations.« less

Tunable Optical Filters for Space Exploration

NASA Technical Reports Server (NTRS)

Crandall, Charles; Clark, Natalie; Davis, Patricia P.

2007-01-01

Spectrally tunable liquid crystal filters provide numerous advantages and several challenges in space applications. We discuss the tradeoffs in design elements for tunable liquid crystal birefringent filters with special consideration required for space exploration applications. In this paper we present a summary of our development of tunable filters for NASA space exploration. In particular we discuss the application of tunable liquid crystals in guidance navigation and control in space exploration programs. We present a summary of design considerations for improving speed, field of view, transmission of liquid crystal tunable filters for space exploration. In conclusion, the current state of the art of several NASA LaRC assembled filters is presented and their performance compared to the predicted spectra using our PolarTools modeling software.

Pascal's wager: combining continuous glucose monitoring and continuous subcutaneous insulin infusion.

PubMed

Kerr, David; Olateju, Tolu

2010-06-01

Pascal's Wager is a suggestion posed by the French Philosopher, Blaise Pascal, that even though the existence of God cannot be determined through reason, a person should wager that God exists because he or she has everything to gain and nothing to lose. In the area of consideration here, the optimum experimental trial of the combined use of continuous subcutaneous insulin infusion and real-time continuous glucose monitoring in free-living individuals with type 1 diabetes providing rock-solid evidence of clinical benefit has not been performed. Nevertheless, there is considerable enthusiasm for combining the technologies among healthcare professionals, patients, and manufacturers based on the belief that this approach to diabetes care must be beneficial beyond the available evidence (i.e., reason).

Introduction on performance analysis and profiling methodologies for KVM on ARM virtualization

NASA Astrophysics Data System (ADS)

Motakis, Antonios; Spyridakis, Alexander; Raho, Daniel

2013-05-01

The introduction of hardware virtualization extensions on ARM Cortex-A15 processors has enabled the implementation of full virtualization solutions for this architecture, such as KVM on ARM. This trend motivates the need to quantify and understand the performance impact, emerged by the application of this technology. In this work we start looking into some interesting performance metrics on KVM for ARM processors, which can provide us with useful insight that may lead to potential improvements in the future. This includes measurements such as interrupt latency and guest exit cost, performed on ARM Versatile Express and Samsung Exynos 5250 hardware platforms. Furthermore, we discuss additional methodologies that can provide us with a deeper understanding in the future of the performance footprint of KVM. We identify some of the most interesting approaches in this field, and perform a tentative analysis on how these may be implemented in the KVM on ARM port. These take into consideration hardware and software based counters for profiling, and issues related to the limitations of the simulators which are often used, such as the ARM Fast Models platform.

Measurement of the Robot Motor Capability of a Robot Motor System: A Fitts's-Law-Inspired Approach

PubMed Central

Lin, Hsien-I; George Lee, C. S.

2013-01-01

Robot motor capability is a crucial factor for a robot, because it affects how accurately and rapidly a robot can perform a motion to accomplish a task constrained by spatial and temporal conditions. In this paper, we propose and derive a pseudo-index of motor performance (pIp) to characterize robot motor capability with robot kinematics, dynamics and control taken into consideration. The proposed pIp provides a quantitative measure for a robot with revolute joints, which is inspired from an index of performance in Fitts's law of human skills. Computer simulations and experiments on a PUMA 560 industrial robot were conducted to validate the proposed pIp for performing a motion accurately and rapidly. PMID:23820745

Measurement of the robot motor capability of a robot motor system: a Fitts's-law-inspired approach.

PubMed

Lin, Hsien-I; Lee, C S George

2013-07-02

Robot motor capability is a crucial factor for a robot, because it affects how accurately and rapidly a robot can perform a motion to accomplish a task constrained by spatial and temporal conditions. In this paper, we propose and derive a pseudo-index of motor performance (pIp) to characterize robot motor capability with robot kinematics, dynamics and control taken into consideration. The proposed pIp provides a quantitative measure for a robot with revolute joints, which is inspired from an index of performance in Fitts's law of human skills. Computer simulations and experiments on a PUMA 560 industrial robot were conducted to validate the proposed pIp for performing a motion accurately and rapidly.

Habitability and performance issues for long duration space flights.

PubMed

Whitmore, M; McQuilkin, M L; Woolford, B J

1998-09-01

Advancing technology, coupled with the desire to explore space has resulted in increasingly longer manned space missions. Although the Long Duration Space Flights (LDSF) have provided a considerable amount of scientific research on human ability to function in extreme environments, findings indicate long duration missions take a toll on the individual, both physiologically and psychologically. These physiological and psychological issues manifest themselves in performance decrements; and could lead to serious errors endangering the mission, spacecraft and crew. The purpose of this paper is threefold: 1) to document existing knowledge of the effects of LDSF on performance, habitability, and workload, 2) to identify and assess potential tools designed to address these decrements, and 3) to propose an implementation plan to address these habitability, performance and workload issues.

Habitability and Performance Issues for Long Duration Space Flights

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; McQuilkin, Meredith L.; Woolford, Barbara J.

1997-01-01

Advancing technology, coupled with the desire to explore space has resulted in increasingly longer manned space missions. Although the Long Duration Space Flights (LDSF) have provided a considerable amount of scientific research on human ability to function in extreme environments, findings indicate long duration missions take a toll on the individual, both physiologically and psychologically. These physiological and psychological issues manifest themselves in performance decrements; and could lead to serious errors endangering the mission, spacecraft and crew. The purpose of this paper is to document existing knowledge of the effects of LDSF on performance, habitability, and workload and to identify and assess potential tools designed to address these decrements as well as propose an implementation plan to address the habitability, performance and workload issues.

Evaluation of indeterminacy of initial data for cad system of electric engine suspension

NASA Astrophysics Data System (ADS)

Antipin, D. Ya; Izmerov, O. V.; Shorokhov, S. G.; Nadtochey, D. G.

2018-03-01

The research of the variants of the suspension of the traction electric motor of diesel locomotives was performed. It was found that the method of designing the suspension does not take into consideration the possible changes of the characteristics of the parts in operation conditions. Variants of the suspension design were proposed and patented, which provide the work reliability despite the operating conditions.

Unmanned Surface Combatant Considerations for Concept Exploration

DTIC Science & Technology

2011-06-01

counterparts who become fatigued. The USC systems could perform missions without having to consider the health and morale of the crew. 18 Arguably the...fourth objective was to evaluate the USC relevant technologies and identify potential design issues . The result was relevant technologies that...and issue mines. R MIW 8 (U) Conduct precise navigation. G MIW 9 (U) Conduct airborne mine countermeasures. R MIW 10 (U) Provide for air operations

Remote Possibilities: Explaining Innovations in Airpower

DTIC Science & Technology

2012-06-01

ground on a warm day. A technological breakthrough, the development of the turbine engine in the latter half of the 1950s, vastly improved rotary-wing...performance. Turbine -powered helicopters provided considerably more lifting power than piston-powered choppers, which greatly expanded the range...1945 to 1955. … In aircraft gas turbines the number of parts has increased from 9,000 in 1946 to 20,000 in 1957. Of precious engineering hours

Lunar concrete for construction

NASA Technical Reports Server (NTRS)

Cullingford, Hatice S.; Keller, M. Dean

1988-01-01

Feasibility of using concrete for lunar-base construction has been discussed recently without relevant data for the effects of vacuum on concrete. Experimental studies performed earlier at Los Alamos have shown that concrete is stable in vacuum with no deterioration of its quality as measured by the compressive strength. Various considerations of using concrete successfully on the moon are provided in this paper along with specific conclusions from the existing data base.

Switching transients in high-frequency high-power converters using power MOSFET's

NASA Technical Reports Server (NTRS)

Sloane, T. H.; Owen, H. A., Jr.; Wilson, T. G.

1979-01-01

The use of MOSFETs in a high-frequency high-power dc-to-dc converter is investigated. Consideration is given to the phenomena associated with the paralleling of MOSFETs and to the effect of stray circuit inductances on the converter circuit performance. Analytical relationships between various time constants during the turning-on and turning-off intervals are derived which provide estimates of plateau and peak levels during these intervals.

Micro supercapacitors based on a 3D structure with symmetric graphene or activated carbon electrodes

NASA Astrophysics Data System (ADS)

Li, Siwei; Wang, Xiaohong; Xing, Hexin; Shen, Caiwei

2013-11-01

This paper presents three-dimensional (3D) micro supercapacitors with thick interdigital electrodes supported and separated by SU-8. Nanoporous carbon materials including graphene and activated carbon (AC) are used as active materials in self-supporting composites to build the electrodes. The SU-8 separators provide mechanical support for thick electrodes and allow a considerable amount of material to be loaded in a limited footprint area. The prototypes have been accomplished by a simple microelectromechanical systems (MEMS) fabrication process and sealed by polydimethylsiloxane (PDMS) caps with ionic liquid electrolytes injected into the electrode area. Electrochemical tests demonstrate that the graphene-based prototype with 100 µm thick electrodes shows good power performance and provides a considerable specific capacitance of about 60 mF cm-2. Two AC-based prototypes show larger capacitance of 160 mF cm-2 and 311 mF cm-2 with 100 µm and 200 µm thick electrodes respectively, because of higher volume density of the material. The results demonstrate that both thick 3D electrode structure and volume capacitance of the electrode material are key factors for high-performance micro supercapacitors, which can be potentially used in specific applications such as power suppliers and storage components for harvesters.

Why the general dentist needs to know how to manage oral lichen planus.

PubMed

Price, Stephanie M; Murrah, Valerie A

2015-01-01

Oral lichen planus (OLP) is a frequently mismanaged chronic disease that requires care throughout a patient's life, and therefore a condition the general dentist must know how to manage. Patients with OLP often suffer considerable physical discomfort and an inability to perform proper oral hygiene, eventually resulting in poor periodontal health. In addition, these patients are confronted with the psychological stress of knowing that OLP is not curable. This is accompanied by a fear of other negative health developments, particularly oral cancer. The objective of this study was to identify major issues surrounding the management of OLP by the general dentist. A literature review of over 1100 articles was performed. An eclectic compilation of the issues revealed 12 major areas of concern. This article reviews those concerns and presents strategies for coping with the myriad signs, symptoms, and complications associated with this disease, as well as educational approaches and legal considerations. A rationale is provided to place the responsibility for the management of these patients under the person best positioned to coordinate care for this condition--the general dentist. A general dentist can contribute to the overall oral health of an OLP patient with timely diagnosis, effective treatment, thorough patient education, and the orchestration of efforts by a team of health care providers.

Training the Developing Brain Part II: Cognitive Considerations for Youth Instruction and Feedback

PubMed Central

Kushner, Adam M.; Kiefer, Adam W.; Lesnick, Samantha; Faigenbaum, Avery D.; Kashikar-Zuck, Susmita; Myer, Gregory D.

2015-01-01

Growing numbers of youth participating in competitive, organized physical activity has led to a concern for the risk of sports related injuries during important periods of human development. Recent studies have demonstrated the ability of Integrative Neuromuscular Training (INT) to enhance athletic performance and to reduce the risk of sports related injuries in youth. Successful implementation of INT necessitates instruction from knowledgeable and qualified instructors who understand the unique physical, cognitive and psychosocial characteristics of youth to provide appropriate training instruction and feedback. Principles of a classical theory of cognitive development provide a useful context for discussion of developmentally appropriate methods and strategies for INT instruction of youth. INT programs that consider these developmentally appropriate approaches will provide a controlled, efficacious environment for youth to improve athletic performance and to reduce risk of sports related injury; thus, promoting a healthy, active lifestyle beyond an individual’s formative years. PMID:25968858

Performance validity testing in neuropsychology: a clinical guide, critical review, and update on a rapidly evolving literature.

PubMed

Lippa, Sara M

2018-04-01

Over the past two decades, there has been much research on measures of response bias and myriad measures have been validated in a variety of clinical and research samples. This critical review aims to guide clinicians through the use of performance validity tests (PVTs) from test selection and administration through test interpretation and feedback. Recommended cutoffs and relevant test operating characteristics are presented. Other important issues to consider during test selection, administration, interpretation, and feedback are discussed including order effects, coaching, impact on test data, and methods to combine measures and improve predictive power. When interpreting performance validity measures, neuropsychologists must use particular caution in cases of dementia, low intelligence, English as a second language/minority cultures, or low education. PVTs provide valuable information regarding response bias and, under the right circumstances, can provide excellent evidence of response bias. Only after consideration of the entire clinical picture, including validity test performance, can concrete determinations regarding the validity of test data be made.

Pumping tests in networks of multilevel sampling wells: Motivation and methodology

USGS Publications Warehouse

Butler, J.J.; McElwee, C.D.; Bohling, Geoffrey C.

1999-01-01

The identification of spatial variations in hydraulic conductivity (K) on a scale of relevance for transport investigations has proven to be a considerable challenge. Recently, a new field method for the estimation of interwell variations in K has been proposed. This method, hydraulic tomography, essentially consists of a series of short‐term pumping tests performed in a tomographic‐like arrangement. In order to fully realize the potential of this approach, information about lateral and vertical variations in pumping‐induced head changes (drawdown) is required with detail that has previously been unobtainable in the field. Pumping tests performed in networks of multilevel sampling (MLS) wells can provide data of the needed density if drawdown can accurately and rapidly be measured in the small‐diameter tubing used in such wells. Field and laboratory experiments show that accurate transient drawdown data can be obtained in the small‐diameter MLS tubing either directly with miniature fiber‐optic pressure sensors or indirectly using air‐pressure transducers. As with data from many types of hydraulic tests, the quality of drawdown measurements from MLS tubing is quite dependent on the effectiveness of well development activities. Since MLS ports of the standard design are prone to clogging and are difficult to develop, alternate designs are necessary to ensure accurate drawdown measurements. Initial field experiments indicate that drawdown measurements obtained from pumping tests performed in MLS networks have considerable potential for providing valuable information about spatial variations in hydraulic conductivity.

Enhancing the capability of the research fleet.

NASA Astrophysics Data System (ADS)

Pinkel, R.

2012-12-01

While the performance and economics of our vessels and manned platforms are fixed by fundamental principles, their scientific capabilities can be considerably extended through the development of new technology. Potential future systems include multi-beam swath- mapping sonars for 3-D imaging of plankton patchiness, wire-guided profiling velocity sensors for establishing full-ocean-depth velocity profiles, shipboard HF radar (CODAR) for mapping energetic currents, and shipboard Doppler radar for mapping the surface wave spectrum. Research vessel users should have access to undersea gliders and autonomous aircraft as well as the current AUVs. In addition, the use of manned stable platforms in an observatory setting deserves further consideration. As well as providing an ideal mount for meteorological and oceanographic sensors, the platforms can provide electrical power and a "heavy lift" capability for sea floor and water column studies. Concerted community effort will be required to develop these new technologies, not all of which will be commercially viable. A strong academic technology base is necessary.

Telerobotic system performance measurement - Motivation and methods

NASA Technical Reports Server (NTRS)

Kondraske, George V.; Khoury, George J.

1992-01-01

A systems performance-based strategy for modeling and conducting experiments relevant to the design and performance characterization of telerobotic systems is described. A developmental testbed consisting of a distributed telerobotics network and initial efforts to implement the strategy described is presented. Consideration is given to the general systems performance theory (GSPT) to tackle human performance problems as a basis for: measurement of overall telerobotic system (TRS) performance; task decomposition; development of a generic TRS model; and the characterization of performance of subsystems comprising the generic model. GSPT employs a resource construct to model performance and resource economic principles to govern the interface of systems to tasks. It provides a comprehensive modeling/measurement strategy applicable to complex systems including both human and artificial components. Application is presented within the framework of a distributed telerobotics network as a testbed. Insight into the design of test protocols which elicit application-independent data is described.

Analysis of a planetary-rotation system for evaporated optical coatings

DOE PAGES

Oliver, J. B.

2016-01-01

The impact of planetary-design considerations for optical coating deposition is analyzed, including the ideal number of planets, variations in system performance, and the deviation of planet motion from the ideal. System capacity is maximized for four planets, although substrate size can significantly influence this result. Guidance is provided in the design of high-performance deposition systems based on the relative impact of different error modes. As a result, errors in planet mounting such that the planet surface is not perpendicular to its axis of rotation are particularly problematic, suggesting planetary design modifications would be appropriate.

Multiple-access phased array antenna simulator for a digital beam-forming system investigation

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.; Yu, John; Walton, Joanne C.; Perl, Thomas D.; Andro, Monty; Alexovich, Robert E.

1992-01-01

Future versions of data relay satellite systems are currently being planned by NASA. Being given consideration for implementation are on-board digital beamforming techniques which will allow multiple users to simultaneously access a single S-band phased array antenna system. To investigate the potential performance of such a system, a laboratory simulator has been developed at NASA's Lewis Research Center. This paper describes the system simulator, and in particular, the requirements, design and performance of a key subsystem, the phased array antenna simulator, which provides realistic inputs to the digital processor including multiple signals, noise, and nonlinearities.

Multiple-access phased array antenna simulator for a digital beam forming system investigation

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.; Yu, John; Walton, Joanne C.; Perl, Thomas D.; Andro, Monty; Alexovich, Robert E.

1992-01-01

Future versions of data relay satellite systems are currently being planned by NASA. Being given consideration for implementation are on-board digital beamforming techniques which will allow multiple users to simultaneously access a single S-band phased array antenna system. To investigate the potential performance of such a system, a laboratory simulator has been developed at NASA's Lewis Research Center. This paper describes the system simulator, and in particular, the requirements, design, and performance of a key subsystem, the phased array antenna simulator, which provides realistic inputs to the digital processor including multiple signals, noise, and nonlinearities.

Electrocardiogram transmission - The state of the art.

NASA Technical Reports Server (NTRS)

Firstenberg, A.; Huston, S. W.; Olsen, D. E.; Hahn, P. M.

1971-01-01

A comparative analysis of available clinical EKG telemetry systems was conducted. Although present day electrocardiogram diagnosis requires a high degree of measurement accuracy, there exists wide variations in the performance characteristics of the various telemeters marketed today necessitating careful consideration of specifications prior to procurement. The authors have endeavored to provide the physicians with a clear understanding, in terms of the effects on the electrocardiogram, of the factors he must evaluate in order to ensure high fidelity EKG reproduction. A tabulation of comparative parameter values for each unit obtained from manufacturers' specifications and substantiated by standardized performance tests conducted in our laboratory is presented.

Design Considerations | Efficient Windows Collaborative

Science.gov Websites

Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

Human Health and Performance Considerations for Exploration of Near-Earth Asteroids (NEA)

NASA Technical Reports Server (NTRS)

Steinberg, Susan L.; Kundrot, Craig; Charles, John B.

2011-01-01

This poster paper reviews the Astronaut health and performance issues for a Near Earth Asteroid (NEA) mission. Risks and other considerations are grouped into four categories and they are characterized for criticality.

Requirements Flowdown for Prognostics and Health Management

NASA Technical Reports Server (NTRS)

Goebel, Kai; Saxena, Abhinav; Roychoudhury, Indranil; Celaya, Jose R.; Saha, Bhaskar; Saha, Sankalita

2012-01-01

Prognostics and Health Management (PHM) principles have considerable promise to change the game of lifecycle cost of engineering systems at high safety levels by providing a reliable estimate of future system states. This estimate is a key for planning and decision making in an operational setting. While technology solutions have made considerable advances, the tie-in into the systems engineering process is lagging behind, which delays fielding of PHM-enabled systems. The derivation of specifications from high level requirements for algorithm performance to ensure quality predictions is not well developed. From an engineering perspective some key parameters driving the requirements for prognostics performance include: (1) maximum allowable Probability of Failure (PoF) of the prognostic system to bound the risk of losing an asset, (2) tolerable limits on proactive maintenance to minimize missed opportunity of asset usage, (3) lead time to specify the amount of advanced warning needed for actionable decisions, and (4) required confidence to specify when prognosis is sufficiently good to be used. This paper takes a systems engineering view towards the requirements specification process and presents a method for the flowdown process. A case study based on an electric Unmanned Aerial Vehicle (e-UAV) scenario demonstrates how top level requirements for performance, cost, and safety flow down to the health management level and specify quantitative requirements for prognostic algorithm performance.

Practical considerations for bicarbonate loading and sports performance.

PubMed

Burke, Louise M

2013-01-01

Consumption of sodium bicarbonate (300 mg/kg 1-2 h before exercise) can temporarily increase blood bicarbonate concentrations, enhancing extracellular buffering of hydrogen ions which accumulate and efflux from the working muscle. Such 'bicarbonate loading' provides an ergogenic strategy for sporting events involving high rates of anaerobic glycolysis which are otherwise limited by the body's capacity to manage the progressive increase in intracellular acidity. Studies show that bicarbonate loading strategies have a moderate positive effect on the performance of sports involving 1-7 min of sustained strenuous exercise, and may also be useful for prolonged sports involving intermittent or sustained periods of high-intensity work rates. This potential to enhance sports performance requires further investigation using appropriate research design, but may be limited by practical considerations such as gut discomfort or the logistics of the event. The effect of chronic use of bicarbonate supplementation prior to high-intensity workouts to promote better training performance and adaptations is worthy of further investigation. While this relatively simple dietary strategy has been studied and used by sports people for over 80 years, it is likely that there are still ways in which further benefits from bicarbonate supplementation can be developed and individualized for specific athletes or specific events. Copyright © 2013 Nestec Ltd., Vevey/S. Karger AG, Basel.

Solar energy system performance evaluation. Seasonal report for Colt Pueblo, Pueblo, Colorado

NASA Technical Reports Server (NTRS)

1980-01-01

The Colt-Pueblo solar energy system, designed to provide space heating and hot water preheating, is described and its operational performance for a 12 month period from February 1979 through January 1980 is evaluated. The space heating subsystem met 31 percent of the measured space heating load which was close to the expected 34 percent solar fraction. Although the hot water solar fraction was 79 percent, the overall energy saving capability was reduced because of the low hot water demand. The measured heating subsystem performance would have improved considerably if the uncontrolled losses primarily from transport piping could have been reduced to an inconsequential level. Fossil energy savings of 70.31 million BTUs are estimated.

Development of the Second-Generation Oscillating Surge Wave Energy Converter with Variable Geometry: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tom, Nathan M; Yu, Yi-Hsiang; Thresher, Robert W

This study investigates the effect of design changes on the hydrodynamics of a novel oscillating surge wave energy converter being developed at the National Renewable Energy Laboratory. The design utilizes controllable geometry features to shed structural loads while maintaining a rated power over a greater number of sea states. The second-generation design will seek to provide a more refined control of performance because the first-generation design demonstrated performance reductions considered too large for smooth power output. Performance is evaluated using frequency domain analysis with consideration of a nonideal power-take-off system, with respect to power absorption, foundation loads, and power-take-off torque.

Hypersonic flight performance improvements by overfueled ramjet combustion

NASA Astrophysics Data System (ADS)

Sachs, G.; Bayer, R.; Lederer, R.; Schaber, R.

1991-12-01

The performance characteristics of hypersonic airbreathing engines are examined with emphasis on the effect of overfueled combustion on thrust and specific fuel-consumption, as well as on the combustion temperature, real gas effects, and pollution due to exhaust gas. It is shown that overfueled ramjet combustion can provide a means for improving flight performance at hypersonic speed and, consequently, reduce the mission fuel burn and the propulsion system weight. It is also shown that, in the separation flight maneuver, the separation condition for the upper stage can be improved by overfueled ramjet combustion of the first stage, making it possible to increase the payload which the upper stage can deliver into orbit. The flight mechanics modeling considerations are presented.

Beyond "utilitarianism": maximizing the clinical impact of moral judgment research.

PubMed

Rosas, Alejandro; Koenigs, Michael

2014-01-01

The use of hypothetical moral dilemmas--which pit utilitarian considerations of welfare maximization against emotionally aversive "personal" harms--has become a widespread approach for studying the neuropsychological correlates of moral judgment in healthy subjects, as well as in clinical populations with social, cognitive, and affective deficits. In this article, we propose that a refinement of the standard stimulus set could provide an opportunity to more precisely identify the psychological factors underlying performance on this task, and thereby enhance the utility of this paradigm for clinical research. To test this proposal, we performed a re-analysis of previously published moral judgment data from two clinical populations: neurological patients with prefrontal brain damage and psychopathic criminals. The results provide intriguing preliminary support for further development of this assessment paradigm.

Development and Validation of Targeted Next-Generation Sequencing Panels for Detection of Germline Variants in Inherited Diseases.

PubMed

Santani, Avni; Murrell, Jill; Funke, Birgit; Yu, Zhenming; Hegde, Madhuri; Mao, Rong; Ferreira-Gonzalez, Andrea; Voelkerding, Karl V; Weck, Karen E

2017-06-01

- The number of targeted next-generation sequencing (NGS) panels for genetic diseases offered by clinical laboratories is rapidly increasing. Before an NGS-based test is implemented in a clinical laboratory, appropriate validation studies are needed to determine the performance characteristics of the test. - To provide examples of assay design and validation of targeted NGS gene panels for the detection of germline variants associated with inherited disorders. - The approaches used by 2 clinical laboratories for the development and validation of targeted NGS gene panels are described. Important design and validation considerations are examined. - Clinical laboratories must validate performance specifications of each test prior to implementation. Test design specifications and validation data are provided, outlining important steps in validation of targeted NGS panels by clinical diagnostic laboratories.

In-vehicle crash avoidance warning systems : human factors considerations

DOT National Transportation Integrated Search

1997-02-01

This document represents the final report of the work performed under contract DTNH22-91 C-07004, In-Vehicle Crash Avoidance Warning Systems: Human Factors Considerations. This project was performed to develop guidelines for the interface desig...

An examination of envy and jealousy in nursing academia.

PubMed

Cleary, Michelle; Walter, Garry; Halcomb, Elizabeth; Lopez, Violeta

2016-07-01

To discuss envy and jealousy and how their positive and negative aspects among nurse academics affect the workplace. In nursing academia, jealousy and envy are common emotions, engendered by demands for high productivity, intense competition for limited resources, preferences for particular assignments and opportunities for promotions. When these feelings are moderate and part of everyday rivalry, competition and ambition benefit the organisation. However, jealousy and envy can have serious consequences including damaged relationships and communication, and the undermining of colleagues' performance. Strategies are recommended to provide opportunities for self-reflection and consideration of how the workplace affects nursing academics' wellbeing and professional performance. Jealousy and envy can be damaging emotions in the workplace. The embittered, hostile person can undermine and damage relationships, disrupt teams and communication, and undermine organisational performance. Discussing the positive and negative effects of envy and jealousy provides an opportunity for nursing academics to self-reflect and to consider others and their own personal and professional performance. Understanding how jealousy and envy impact on the work environment, workplace relationships and individual/team performance is important especially for early career and seasoned nursing academics alike.

Full Scale RC Beam-Column Joints Strengthened with Steel Reinforced Polymer Systems

NASA Astrophysics Data System (ADS)

De Vita, Alessandro; Napoli, Annalisa; Realfonzo, Roberto

2017-07-01

This paper presents the results of an experimental campaign performed at the Laboratory of Materials and Structural Testing of the University of Salerno (Italy) in order to investigate the seismic performance of RC beam-column joints strengthened with Steel Reinforced Polymer (SRP) systems. With the aim to represent typical façade frames’ beam-column subassemblies found in existing RC buildings, specimens were provided with two short beam stubs orthogonal to the main beam and were designed with inadequate seismic details. Five members were strengthened by using two different SRP layouts while the remaining ones were used as benchmarks. Once damaged, two specimens were also repaired, retrofitted with SRP and subjected to cyclic test again. The results of cyclic tests performed on SRP strengthened joints are examined through a comparison with the outcomes of the previous experimental program including companion specimens not provided with transverse beam stubs and strengthened by Carbon Fiber Reinforced Polymer (CFRP) systems. In particular, both qualitative and quantitative considerations about the influence of the confining effect provided by the secondary beams on the joint response, the suitability of all the adopted strengthening solutions (SRP/CFRP systems), the performances and the failure modes experienced in the several cases studied are provided.

Scheduler Design Criteria: Requirements and Considerations

NASA Technical Reports Server (NTRS)

Lee, Hanbong

2016-01-01

This presentation covers fundamental requirements and considerations for developing schedulers in airport operations. We first introduce performance and functional requirements for airport surface schedulers. Among various optimization problems in airport operations, we focus on airport surface scheduling problem, including runway and taxiway operations. We then describe a basic methodology for airport surface scheduling such as node-link network model and scheduling algorithms previously developed. Next, we explain how to design a mathematical formulation in more details, which consists of objectives, decision variables, and constraints. Lastly, we review other considerations, including optimization tools, computational performance, and performance metrics for evaluation.

Shuttle cryogenic supply system optimization study. Volume 2: Technical report, sections 4 through 9

NASA Technical Reports Server (NTRS)

1973-01-01

The design and development of cryogenic supply systems for space shuttle vehicles are discussed. The weights, component counts, and statements of advantages and disadvantages of the systems considered are presented. Performance characteristics of the systems are analyzed in the form of graphs. Block diagrams and engineering drawings of the candidate systems are provided. Special consideration is given to flow rates and thermodynamic properties of the cryogenic systems.

Department of Defense Base Structure Report for FY 1986.

DTIC Science & Technology

1985-01-01

given consideration because of both the high costs and the adverse effect on morale, productivity, and readiness. 5. CIVILIAN LABOR MARKET. Many Army...are reluctant to relocate with the transfer of the functions they perform. The lack of an appropriate labor market thus becomes a factor in evaluating...survivability. Training areas should provide the force with a wide array of clima - tological and topographical features in which to train and which

Achieving High Performance in Parallel Applications via Kernel-Application Interaction

DTIC Science & Technology

1996-04-01

time systems include airplane autopilot or nuclear power plant control. New complex, parallel soft real-time applica- tions have been generating...to keep as many sheep on the table as possible, and the more powerful the sheep behavior-models and look-ahead, the better the results. General...fact that it provides considerable flexibility when considering the amount of processing power to allocate to a planner. In this experiment we again

Neutron fluxes in test reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Youinou, Gilles Jean-Michel

Communicate the fact that high-power water-cooled test reactors such as the Advanced Test Reactor (ATR), the High Flux Isotope Reactor (HFIR) or the Jules Horowitz Reactor (JHR) cannot provide fast flux levels as high as sodium-cooled fast test reactors. The memo first presents some basics physics considerations about neutron fluxes in test reactors and then uses ATR, HFIR and JHR as an illustration of the performance of modern high-power water-cooled test reactors.

Mariner Jupiter/Saturn 1977 infrared interferometer spectrometer (MJS' 77) design study

NASA Technical Reports Server (NTRS)

1974-01-01

A design study of the Infrared Interferometer Spectrometer and Radiometer (IRIS) instrument for the Mariner Jupiter/Saturn 1977 mission was conducted. The objective of the study was to investigate a number a potential problem areas identified in previous studies and to develop the instrument system designs along the lines providing for the optimum performance obtainable with the allowable budgets. The considerations for the optical design, mechanical design, and electronic design are examined.

Biomechanical and performance implications of weapon design: comparison of bullpup and conventional configurations.

PubMed

Stone, Richard T; Moeller, Brandon F; Mayer, Robert R; Rosenquist, Bryce; Van Ryswyk, Darin; Eichorn, Drew

2014-06-01

Shooter accuracy and stability were monitored while firing two bullpup and two conventional configuration rifles of the same caliber in order to determine if one style of weapon results in superior performance. Considerable debate exists among police and military professionals regarding the differences between conventional configuration weapons, where the magazine and action are located ahead of the trigger, and bullpup configuration, where they are located behind the trigger (closer to the user). To date, no published research has attempted to evaluate this question from a physical ergonomics standpoint, and the knowledge that one style might improve stability or result in superior performance is of interest to countless military, law enforcement, and industry experts. A live-fire evaluation of both weapon styles was performed using a total of 48 participants. Shooting accuracy and fluctuations in biomechanical stability (center of pressure) were monitored while subjects used the weapons to perform standard drills. The bullpup weapon designs were found to provide a significant advantage in accuracy and shooter stability, while subjects showed considerable preference toward the conventional weapons. Although many mechanical and maintenance issues must be considered before committing to a bullpup or conventional weapon system, it is clear in terms of basic human stability that the bullpup is the more advantageous configuration. Results can be used by competitive shooter, military, law enforcement, and industry experts while outfitting personnel with a weapon system that leads to superior performance.

How Is Working Memory Training Likely to Influence Academic Performance? Current Evidence and Methodological Considerations.

PubMed

Bergman Nutley, Sissela; Söderqvist, Stina

2017-01-01

Working memory (WM) is one of our core cognitive functions, allowing us to keep information in mind for shorter periods of time and then work with this information. It is the gateway that information has to pass in order to be processed consciously. A well-functioning WM is therefore crucial for a number of everyday activities including learning and academic performance (Gathercole et al., 2003; Bull et al., 2008), which is the focus of this review. Specifically, we will review the research investigating whether improving WM capacity using Cogmed WM training can lead to improvements on academic performance. Emphasis is given to reviewing the theoretical principles upon which such investigations rely, in particular the complex relation between WM and mathematical and reading abilities during development and how these are likely to be influenced by training. We suggest two possible routes in which training can influence academic performance, one through an effect on learning capacity which would thus be evident with time and education, and one through an immediate effect on performance on reading and mathematical tasks. Based on the theoretical complexity described we highlight some methodological issues that are important to take into consideration when designing and interpreting research on WM training and academic performance, but that are nonetheless often overlooked in the current research literature. Finally, we will provide some suggestions for future research for advancing the understanding of WM training and its potential role in supporting academic attainment.

Structural materials issues for the next generation fission reactors

NASA Astrophysics Data System (ADS)

Chant, I.; Murty, K. L.

2010-09-01

Generation-IV reactor design concepts envisioned thus far cater to a common goal of providing safer, longer lasting, proliferation-resistant, and economically viable nuclear power plants. The foremost consideration in the successful development and deployment of Gen-W reactor systems is the performance and reliability issues involving structural materials for both in-core and out-of-core applications. The structural materials need to endure much higher temperatures, higher neutron doses, and extremely corrosive environments, which are beyond the experience of the current nuclear power plants. Materials under active consideration for use in different reactor components include various ferritic/martensitic steels, austenitic stainless steels, nickel-base superalloys, ceramics, composites, etc. This article addresses the material requirements for these advanced fission reactor types, specifically addressing structural materials issues depending on the specific application areas.

Preshaping command inputs to reduce telerobotic system oscillations

NASA Technical Reports Server (NTRS)

Singer, Neil C.; Seering, Warren P.

1989-01-01

The results of using a new technique for shaping inputs to a model of the space shuttle Remote Manipulator System (RMS) are presented. The shapes inputs move the system to the same location that was originally commanded, however, the oscillations of the machine are considerably reduced. An overview of the new shaping method is presented. A description of RMS model is provided. The problem of slow joint servo rates on the RMS is accommodated with an extension of the shaping method. The results and sample data are also presented for both joint and three-dimensional cartesian motions. The results demonstrate that the new shaping method performs well on large, telerobotic systems which exhibit significant structural vibration. The new method is shown to also result in considerable energy savings during operations of the RMS manipulator.

Using Risk Assessment Methodologies to Meet Management Objectives

NASA Technical Reports Server (NTRS)

DeMott, D. L.

2015-01-01

Corporate and program objectives focus on desired performance and results. ?Management decisions that affect how to meet these objectives now involve a complex mix of: technology, safety issues, operations, process considerations, employee considerations, regulatory requirements, financial concerns and legal issues. ?Risk Assessments are a tool for decision makers to understand potential consequences and be in a position to reduce, mitigate or eliminate costly mistakes or catastrophic failures. Using a risk assessment methodology is only a starting point. ?A risk assessment program provides management with important input in the decision making process. ?A pro-active organization looks to the future to avoid problems, a reactive organization can be blindsided by risks that could have been avoided. ?You get out what you put in, how useful your program is will be up to the individual organization.

Structurally Integrated, Damage-Tolerant, Thermal Spray Coatings

NASA Astrophysics Data System (ADS)

Vackel, Andrew; Dwivedi, Gopal; Sampath, Sanjay

2015-07-01

Thermal spray coatings are used extensively for the protection and life extension of engineering components exposed to harsh wear and/or corrosion during service in aerospace, energy, and heavy machinery sectors. Cermet coatings applied via high-velocity thermal spray are used in aggressive wear situations almost always coupled with corrosive environments. In several instances (e.g., landing gear), coatings are considered as part of the structure requiring system-level considerations. Despite their widespread use, the technology has lacked generalized scientific principles for robust coating design, manufacturing, and performance analysis. Advances in process and in situ diagnostics have provided significant insights into the process-structure-property-performance correlations providing a framework-enhanced design. In this overview, critical aspects of materials, process, parametrics, and performance are discussed through exemplary studies on relevant compositions. The underlying connective theme is understanding and controlling residual stresses generation, which not only addresses process dynamics but also provides linkage for process-property relationship for both the system (e.g., fatigue) and the surface (wear and corrosion). The anisotropic microstructure also invokes the need for damage-tolerant material design to meet future goals.

An Overview of the HST Advanced Camera for Surveys' On-orbit Performance

NASA Astrophysics Data System (ADS)

Hartig, G. F.; Ford, H. C.; Illingworth, G. D.; Clampin, M.; Bohlin, R. C.; Cox, C.; Krist, J.; Sparks, W. B.; De Marchi, G.; Martel, A. R.; McCann, W. J.; Meurer, G. R.; Sirianni, M.; Tsvetanov, Z.; Bartko, F.; Lindler, D. J.

2002-05-01

The Advanced Camera for Surveys (ACS) was installed in the HST on 7 March 2002 during the fourth servicing mission to the observatory, and is now beginning science operations. The ACS provides HST observers with a considerably more sensitive, higher-resolution camera with wider field and polarimetric, coronagraphic, low-resolution spectrographic and solar-blind FUV capabilities. We review selected results of the early verification and calibration program, comparing the achieved performance with the advertised specifications. Emphasis is placed on the optical characteristics of the camera, including image quality, throughput, geometric distortion and stray-light performance. More detailed analyses of various aspects of the ACS performance are presented in other papers at this meeting. This work was supported by a NASA contract and a NASA grant.

Investigation of beamed-energy ERH thruster performance

NASA Technical Reports Server (NTRS)

Myrabo, Leik N.; Strayer, T. Darton; Bossard, John A.; Richard, Jacques C.; Gallimore, Alec D.

1986-01-01

The objective of this study was to determine the performance of an External Radiation Heated (ERH) thruster. In this thruster, high intensity laser energy is focused to ignite either a Laser Supported Combustion (LSC) wave or a Laser Supported Detonation (LSD) wave. Thrust is generated as the LSC or LSD wave propagates over the thruster's surface, or in the proposed thruster configuration, the vehicle afterbody. Thrust models for the LSC and LSD waves were developed and simulated on a computer. Performance parameters investigated include the effect of laser intensity, flight Mach number, and altitude on mean-thrust and coupling coefficient of the ERH thruster. Results from these models suggest that the ERH thruster using LSC/LSD wave ignition could provide propulsion performance considerably greater than any propulsion system currently available.

RISC Processors and High Performance Computing

NASA Technical Reports Server (NTRS)

Bailey, David H.; Saini, Subhash; Craw, James M. (Technical Monitor)

1995-01-01

This tutorial will discuss the top five RISC microprocessors and the parallel systems in which they are used. It will provide a unique cross-machine comparison not available elsewhere. The effective performance of these processors will be compared by citing standard benchmarks in the context of real applications. The latest NAS Parallel Benchmarks, both absolute performance and performance per dollar, will be listed. The next generation of the NPB will be described. The tutorial will conclude with a discussion of future directions in the field. Technology Transfer Considerations: All of these computer systems are commercially available internationally. Information about these processors is available in the public domain, mostly from the vendors themselves. The NAS Parallel Benchmarks and their results have been previously approved numerous times for public release, beginning back in 1991.

A Safety Index and Method for Flightdeck Evaluation

NASA Technical Reports Server (NTRS)

Latorella, Kara A.

2000-01-01

If our goal is to improve safety through machine, interface, and training design, then we must define a metric of flightdeck safety that is usable in the design process. Current measures associated with our notions of "good" pilot performance and ultimate safety of flightdeck performance fail to provide an adequate index of safe flightdeck performance for design evaluation purposes. The goal of this research effort is to devise a safety index and method that allows us to evaluate flightdeck performance holistically and in a naturalistic experiment. This paper uses Reason's model of accident causation (1990) as a basis for measuring safety, and proposes a relational database system and method for 1) defining a safety index of flightdeck performance, and 2) evaluating the "safety" afforded by flightdeck performance for the purpose of design iteration. Methodological considerations, limitations, and benefits are discussed as well as extensions to this work.

The influence of in-game emotions on basketball performance.

PubMed

Uphill, Mark; Groom, Ryan; Jones, Marc

2014-01-01

This study examined the influence of emotions on performance in basketball. Six female basketball players were videotaped in six games. Frequency of performance behaviours was recorded minute-by-minute and indices of successful (SGI) and unsuccessful (UGI) game involvement derived for each player. Post-game, players reported the intensity of experienced emotions (anger, anxiety, embarrassment, excitement and happiness), and the time of the eliciting incident. The only emotion revealed as a significant predictor of SGI was happiness; both anger and embarrassment were significant predictors of increased UGI. Consideration of individual player analyses suggests that there is variation in the magnitude of the influence of emotions on performance and the extent to which this influence was helpful or harmful to performance. The study provides evidence that emotions are associated with changes in game behaviours in competition. Implications for further research examining the emotion-performance relationship are discussed.

Simulation-based Randomized Comparative Assessment of Out-of-Hospital Cardiac Arrest Resuscitation Bundle Completion by Emergency Medical Service Teams Using Standard Life Support or an Experimental Automation-assisted Approach.

PubMed

Choi, Bryan; Asselin, Nicholas; Pettit, Catherine C; Dannecker, Max; Machan, Jason T; Merck, Derek L; Merck, Lisa H; Suner, Selim; Williams, Kenneth A; Jay, Gregory D; Kobayashi, Leo

2016-12-01

Effective resuscitation of out-of-hospital cardiac arrest (OHCA) patients is challenging. Alternative resuscitative approaches using electromechanical adjuncts may improve provider performance. Investigators applied simulation to study the effect of an experimental automation-assisted, goal-directed OHCA management protocol on EMS providers' resuscitation performance relative to standard protocols and equipment. Two-provider (emergency medical technicians (EMT)-B and EMT-I/C/P) teams were randomized to control or experimental group. Each team engaged in 3 simulations: baseline simulation (standard roles); repeat simulation (standard roles); and abbreviated repeat simulation (reversed roles, i.e., basic life support provider performing ALS tasks). Control teams used standard OHCA protocols and equipment (with high-performance cardiopulmonary resuscitation training intervention); for second and third simulations, experimental teams performed chest compression, defibrillation, airway, pulmonary ventilation, vascular access, medication, and transport tasks with goal-directed protocol and resuscitation-automating devices. Videorecorders and simulator logs collected resuscitation data. Ten control and 10 experimental teams comprised 20 EMT-B's; 1 EMT-I, 8 EMT-C's, and 11 EMT-P's; study groups were not fully matched. Both groups suboptimally performed chest compressions and ventilations at baseline. For their second simulations, control teams performed similarly except for reduced on-scene time, and experimental teams improved their chest compressions (P=0.03), pulmonary ventilations (P<0.01), and medication administration (P=0.02); changes in their performance of chest compression, defibrillation, airway, and transport tasks did not attain significance against control teams' changes. Experimental teams maintained performance improvements during reversed-role simulations. Simulation-based investigation into OHCA resuscitation revealed considerable variability and improvable deficiencies in small EMS teams. Goal-directed, automation-assisted OHCA management augmented select resuscitation bundle element performance without comprehensive improvement.

Practical internal combustion engine laser spark plug development

NASA Astrophysics Data System (ADS)

Myers, Michael J.; Myers, John D.; Guo, Baoping; Yang, Chengxin; Hardy, Christopher R.

2007-09-01

Fundamental studies on laser ignition have been performed by the US Department of Energy under ARES (Advanced Reciprocating Engines Systems) and by the California Energy Commission under ARICE (Advanced Reciprocating Internal Combustion Engine). These and other works have reported considerable increases in fuel efficiencies along with substantial reductions in green-house gas emissions when employing laser spark ignition. Practical commercial applications of this technology require low cost high peak power lasers. The lasers must be small, rugged and able to provide stable laser beam output operation under adverse mechanical and environmental conditions. New DPSS (Diode Pumped Solid State) lasers appear to meet these requirements. In this work we provide an evaluation of HESP (High Efficiency Side Pumped) DPSS laser design and performance with regard to its application as a practical laser spark plug for use in internal combustion engines.

Injector design guidelines for gas/liquid propellant systems

NASA Technical Reports Server (NTRS)

Falk, A. Y.; Burick, R. J.

1973-01-01

Injector design guidelines are provided for gas/liquid propellant systems. Information was obtained from a 30-month applied research program encompassing an analytical, design, and experimental effort to relate injector design parameters to simultaneous attainment of high performance and component (injector/thrust chamber) compatibility for gas/liquid space storable propellants. The gas/liquid propellant combination studied was FLOX (82.6% F2)/ ambient temperature gaseous methane. Design criteria that provide for simultaneous attainment of high performance and chamber compatibility are presented for both injector types. Parametric data are presented that are applicable for the design of circular coaxial and like-doublet injectors that operate with design parameters similar to those employed. However, caution should be exercised when applying these data to propellant combinations whose elements operate in ranges considerably different from those employed in this study.

A Review of the CMOS Buried Double Junction (BDJ) Photodetector and its Applications

PubMed Central

Feruglio, Sylvain; Lu, Guo-Neng; Garda, Patrick; Vasilescu, Gabriel

2008-01-01

A CMOS Buried Double Junction PN (BDJ) photodetector consists of two vertically-stacked photodiodes. It can be operated as a photodiode with improved performance and wavelength-sensitive response. This paper presents a review of this device and its applications. The CMOS implementation and operating principle are firstly described. This includes the description of several key aspects directly related to the device performances, such as surface reflection, photon absorption and electron-hole pair generation, photocurrent and dark current generation, etc. SPICE modelling of the detector is then presented. Next, design and process considerations are proposed in order to improve the BDJ performance. Finally, several BDJ-detector-based image sensors provide a survey of their applications. PMID:27873887

Precision Attitude Determination System (PADS) design and analysis. Two-axis gimbal star tracker

NASA Technical Reports Server (NTRS)

1973-01-01

Development of the Precision Attitude Determination System (PADS) focused chiefly on the two-axis gimballed star tracker and electronics design improved from that of Precision Pointing Control System (PPCS), and application of the improved tracker for PADS at geosynchronous altitude. System design, system analysis, software design, and hardware design activities are reported. The system design encompasses the PADS configuration, system performance characteristics, component design summaries, and interface considerations. The PADS design and performance analysis includes error analysis, performance analysis via attitude determination simulation, and star tracker servo design analysis. The design of the star tracker and electronics are discussed. Sensor electronics schematics are included. A detailed characterization of the application software algorithms and computer requirements is provided.

Travel During Pregnancy: Considerations for the Obstetric Provider.

PubMed

Antony, Kathleen M; Ehrenthal, Deborah; Evensen, Ann; Iruretagoyena, J Igor

2017-02-01

Travel among US citizens is becoming increasingly common, and travel during pregnancy is also speculated to be increasingly common. During pregnancy, the obstetric provider may be the first or only clinician approached with questions regarding travel. In this review, we discuss the reasons women travel during pregnancy, medical considerations for long-haul air travel, destination-specific medical complications, and precautions for pregnant women to take both before travel and while abroad. To improve the quality of pretravel counseling for patients before or during pregnancy, we have created 2 tools: a guide for assessing the pregnant patient's risk during travel and a pretravel checklist for the obstetric provider. A PubMed search for English-language publications about travel during pregnancy was performed using the search terms "travel" and "pregnancy" and was limited to those published since the year 2000. Studies on subtopics were not limited by year of publication. Eight review articles were identified. Three additional studies that analyzed data from travel clinics were found, and 2 studies reported on the frequency of international travel during pregnancy. Additional publications addressed air travel during pregnancy (10 reviews, 16 studies), high-altitude travel during pregnancy (5 reviews, 5 studies), and destination-specific illnesses in pregnant travelers. Travel during pregnancy including international travel is common. Pregnant travelers have unique travel-related and destination-specific risks. We review those risks and provide tools for obstetric providers to use in counseling pregnant travelers.

Virtual Surgical Planning for Inferior Alveolar Nerve Reconstruction.

PubMed

Miloro, Michael; Markiewicz, Michael R

2017-11-01

The purpose of this study was to assess the outcomes after preoperative virtual surgical planning (VSP) for inferior alveolar nerve (IAN) reconstruction in ablative mandibular surgery. We performed a retrospective evaluation of consecutive surgical cases using standard VSP for hard tissue resection and reconstructive surgery in addition to IAN VSP performed simultaneously during surgery. Cases were assessed regarding the planning time, additional costs involved, surgeon's subjective impression of the process, accuracy of the prediction during surgery, and operative time during surgery compared with cases performed without VSP. The study sample was composed of 5 cases of mandibular resection for benign disease, with bony, soft tissue, and neural reconstruction with the use of VSP. The addition of IAN reconstruction to the VSP session added no additional expense to the planning session but resulted in an additional 22.5 minutes (±7.5 minutes) for the webinar session. From a subjective standpoint, IAN VSP provided the surgeon with a discreet plan for surgery. From an objective standpoint, IAN VSP provided the exact length and diameter of nerve graft required for surgery, facilitated the surgeon's ability to visualize the actual nerve graft procedure, and limited the additional time required for simultaneous nerve reconstruction. Despite perceived prejudice against simultaneous IAN reconstruction with complex mandibular resection and reconstruction, the use of IAN VSP may facilitate the actual surgical procedure and result in considerably improved patient outcomes without considerable additional time or cost associated with this protocol. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Defining poor and optimum performance in an IVF programme.

PubMed

Castilla, Jose A; Hernandez, Juana; Cabello, Yolanda; Lafuente, Alejandro; Pajuelo, Nuria; Marqueta, Javier; Coroleu, Buenaventura

2008-01-01

At present there is considerable interest in healthcare administration, among professionals and among the general public concerning the quality of programmes of assisted reproduction. There exist various methods for comparing and analysing the results of clinical activity, with graphical methods being the most commonly used for this purpose. As yet, there is no general consensus as to how the poor performance (PP) or optimum performance (OP) of assisted reproductive technologies should be defined. Data from the IVF/ICSI register of the Spanish Fertility Society were used to compare and analyse different definitions of PP or OP. The primary variable best reflecting the quality of an IVF/ICSI programme was taken to be the percentage of singleton births per IVF/ICSI cycle initiated. Of the 75 infertility clinics that took part in the SEF-2003 survey, data on births were provided by 58. A total of 25 462 cycles were analysed. The following graphical classification methods were used: ranking of the proportion of singleton births per cycles started in each centre (league table), Shewhart control charts, funnel plots, best and worst-case scenarios and state of the art methods. The clinics classified as producing PP or OP varied considerably depending on the classification method used. Only three were rated as providing 'PP' or 'OP' by all methods, unanimously. Another four clinics were classified as 'poor' or 'optimum' by all the methods except one. On interpreting the results derived from IVF/ICSI centres, it is essential to take into account the characteristics of the method used for this purpose.

Standard module approach to scanning requirements for second-generation airborne FLIRs

NASA Astrophysics Data System (ADS)

Ludwiszewski, Alan P.

1995-05-01

This paper examines the specification requirements for the development of standard module scanning components to be used in conjunction with SADA I and SADA II sensor arrays. System-level design considerations are presented to identify a selection of components that is consistent with optimum use of the SADA technology. A limited-rotation electromagnetic actuator, used in conjunction with an angular position sensor and a digital controller, is shown to have the necessary performance and flexibility to perform the frame scan function for a wide range of airborne systems. System level requirements and specifications for an optional interlace scan system are also provided.

Mission Concepts and Operations for Asteroid Mitigation Involving Multiple Gravity Tractors

NASA Technical Reports Server (NTRS)

Foster, Cyrus; Bellerose, Julie; Jaroux, Belgacem; Mauro, David

2012-01-01

The gravity tractor concept is a proposed method to deflect an imminent asteroid impact through gravitational tugging over a time scale of years. In this study, we present mission scenarios and operational considerations for asteroid mitigation efforts involving multiple gravity tractors. We quantify the deflection performance improvement provided by a multiple gravity tractor campaign and assess its sensitivity to staggered launches. We next explore several proximity operation strategies to accommodate multiple gravity tractors at a single asteroid including formation-flying and mechanically-docked configurations. Finally, we utilize 99942 Apophis as an illustrative example to assess the performance of a multiple gravity tractor campaign.

Airborne oceanographic lidar system

NASA Technical Reports Server (NTRS)

1975-01-01

Specifications and preliminary design of an Airborne Oceanographic Lidar (AOL) system, which is to be constructed for installation and used on a NASA Wallops Flight Center (WFC) C-54 research aircraft, are reported. The AOL system is to provide an airborne facility for use by various government agencies to demonstrate the utility and practicality of hardware of this type in the wide area collection of oceanographic data on an operational basis. System measurement and performance requirements are presented, followed by a description of the conceptual system approach and the considerations attendant to its development. System performance calculations are addressed, and the system specifications and preliminary design are presented and discussed.

Spinal neoplasms in small animals.

PubMed

Bagley, Rodney S

2010-09-01

Tumors arising from or involving the spinal cord are important considerations in animals presented for pain and limb dysfunction. Clinical signs of spinal cord dysfunction, however, are not pathognomic for neoplastic disease in most instances. Advanced magnetic resonance imaging (MRI) often accurately identifies the location and extent of abnormalities. Although some spinal neoplasms have a characteristic appearance with MRI, in other instances the abnormalities may not be readily discernable as neoplastic. Histologic diagnosis, therefore, is imperative to provide information regarding potential treatment modalities and prognosis. Histologic diagnosis is most commonly performed following surgical biopsy and is often performed in combination with surgical removal. Copyright 2010 Elsevier Inc. All rights reserved.

Performance of the PARCS Testbed Cesium Fountain Frequency Standard

NASA Technical Reports Server (NTRS)

Enzer, Daphna G.; Klipstein, William M.

2004-01-01

A cesium fountain frequency standard has been developed as a ground testbed for the PARCS (Primary Atomic Reference Clock in Space) experiment, an experiment intended to fly on the International Space Station. We report on the performance of the fountain and describe some of the implementations motivated in large part by flight considerations, but of relevance for ground fountains. In particular, we report on a new technique for delivering cooling and trapping laser beams to the atom collection region, in which a given beam is recirculated three times effectively providing much more optical power than traditional configurations. Allan deviations down to 10 have been achieved with this method.

A comparative study of interface reconstruction methods for multi-material ALE simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kucharik, Milan; Garimalla, Rao; Schofield, Samuel

2009-01-01

In this paper we compare the performance of different methods for reconstructing interfaces in multi-material compressible flow simulations. The methods compared are a material-order-dependent Volume-of-Fluid (VOF) method, a material-order-independent VOF method based on power diagram partitioning of cells and the Moment-of-Fluid method (MOF). We demonstrate that the MOF method provides the most accurate tracking of interfaces, followed by the VOF method with the right material ordering. The material-order-independent VOF method performs some-what worse than the above two while the solutions with VOF using the wrong material order are considerably worse.

Some design considerations for solar-powered aircraft

NASA Technical Reports Server (NTRS)

Phillips, W. H.

1980-01-01

Performance and operating characteristics are presented for a solar powered aircraft intended to remain aloft for long periods. The critical technologies which limit the performance are identified. By using the techniques presented, the effects of variation in the system parameters are studied. Practical design consideration are discussed.

Design consideration of δ-doping channels for high-performance n + - GaAs / p + -InGaP/n-GaAs camel-gate field effect transistors

NASA Astrophysics Data System (ADS)

Tsai, Jung-Hui; Chen, Jeng-Shyan; Chu, Yu-Jui

2005-01-01

The influence of δ-doping channels on the performance of n +-GaAs/p +-InGaP/n-GaAs camel-gate field effect transistors is investigated by theoretical analysis and experimental results. The depleted pn junction of the camel gate and the existence of considerable conduction band discontinuity at the InGaP/GaAs heterojunction enhance the potential barrier height and the forward gate voltage. As the concentration-thickness products of the n-GaAs layer and δ-doping layer are fixed, the higher δ-doping device exhibits a higher potential barrier height, a larger drain current, and a broader gate voltage swing, whereas the transconductance is somewhat lower. For a n +=5.5×10 12 cm -2δ-doping device, the experimental result exhibits a maximum transconductance of 240 mS/mm and a gate voltage swing of 3.5 V. Consequently, the studied devices provide a good potential for large signal and linear circuit applications.

Sampling strategies on Mars: Remote and not-so-remote observations from a surface rover

NASA Technical Reports Server (NTRS)

Singer, R. B.

1988-01-01

The mobility and speed of a semi-autonomous Mars rover are of necessity limited by the need to think and stay out of trouble. This consideration makes it essential that the rover's travels be carefully directed to likely targets of interest for sampling and in situ study. Short range remote sensing conducted from the rover, based on existing technology, can provide significant information about the chemistry and mineralogy of surrounding rocks and soils in support of sampling efforts. These observations are of course of direct scientific importance as well. Because of the small number of samples actually to be returned to Earth, it is also important that candidate samples be analyzed aboard the rover so that diversity can be maximized. It is essential to perform certain types of analyses, such as those involving volatiles, prior to the thermal and physical shocks of the return trip to Earth. In addition, whatever measurements can be made of nonreturned samples will be important to enlarge the context of the detailed analyses to be performed later on the few returned samples. Some considerations related to these objectives are discussed.

Low Young's moduli induced D-E loop dispersion and its effect on the energy discharging performance of PVDF and P(VDF-co-HFP) films

NASA Astrophysics Data System (ADS)

Xia, Weimin; Chen, Bing; Liu, Yang; Wang, Qing; Zhang, Zhicheng

2018-03-01

Large-scale stretched films of PVDF and its copolymer P(VDF-co-HFP) with various molar contents of VDF were found to possess the considerable breakdown electric fields of about 900 MV/m. Under such a high electric field, soft polymer films with lower Young's moduli are larger compressed, giving rise to a constraining of reversal of dipoles and thereby a depressing of the dielectric response. Consequently, the displacement-electric field loops at above 700 MV/m show a dispersion phenomenon, which agrees with the reduction of in phase dielectric constant from 10 to 7 in soft P(VDF-co-HFP) 85/15mol% thick film caused by ultra-high isostatic pressure of about 400Mpa. Comparatively, in mechanically stretched PVDF and 95.5/4.5mol% P(VDF-co-HFP) thick films with a relatively high hardness, the considerable discharged energy densities of 27.1 J/cm3 and 27.7 J/cm3 were obtained, providing an effective way to achieve high discharging performance for these fluoropolymers.

Potential Nationwide Improvements in Productivity and Health from Better Indoor Environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisk, W.J.; Rosenfeld, A.H.

1998-05-01

Theoretical considerations and empirical data suggest that existing technologies and procedures can improve indoor environments in a manner that significantly increases productivity and health. Existing literature contains moderate to strong evidence that characteristics of buildings and indoor environments significantly influence rates of respiratory disease, allergy and asthma symptoms, sick building symptoms, and worker performance. While there is considerable uncertainty in our estimates of the magnitudes of productivity gains that may be obtained by providing better indoor environments, the projected gains are very large. For the U.S., we estimate potential annual savings and productivity gains of $6 to $19 billion frommore » reduced respiratory disease, $1 to $4 billion from reduced allergies and asthma, $10 to $20 billion from reduced sick building syndrome symptoms, and $12 to $125 billion from direct improvements in worker performance that are unrelated to health. In two example calculations, the potential financial benefits of improving indoor environments exceed costs by a factor of 8 and 14. Productivity gains that are quantified and demonstrated could serve as a strong stimulus for energy efficiency measures that simultaneously improve the indoor environment.« less

Potential nationwide improvements in productivity and health from better indoor environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisk, W.J.; Rosenfeld, A.H.

1998-07-01

Theoretical considerations and empirical data suggest that existing technologies and procedures can improve indoor environments in a manner that significantly increases productivity and health. Existing literature contains moderate to strong evidence that characteristics of buildings and indoor environments significantly influence rates of respiratory disease, allergy and asthma symptoms, sick building symptoms, and worker performance. While there is considerable uncertainty in their estimates of the magnitudes of productivity gains that may be obtained by providing better indoor environments, the projected gains are very large. For the US, the authors estimate potential annual savings and productivity gains of $6 to $19 billionmore » from reduced respiratory disease, $1 to $4 billion from reduced allergies and asthma, $10 to $20 billion from reduced sick building syndrome symptoms, and $12 to $125 billion from direct improvements in worker performance that are unrelated to health. In two example calculations, the potential financial benefits of improving indoor environments exceed costs by a factor of 8 and 14. Productivity gains that are quantified and demonstrated could serve as a strong stimulus for energy efficiency measures that simultaneously improve the indoor environment.« less

A comparison of integral equations and density functional theory versus Monte Carlo for hard dumbbells near a hard wall

NASA Astrophysics Data System (ADS)

Henderson, Douglas; Quintana, Jacqueline; Sokołowski, Stefan

1995-03-01

A comparison of Percus-Yevick-Pynn-Lado model theory and a density functional (DF) theory of nonuniform fluids of nonspherical particles is performed. The DF used is a new generalization of Tarazona's theory. The conclusion is that DF theory provides a preferable route to describe the system under consideration. Its accuracy can be improved with better approximation for the direct correlation function (DCF) for bulk system.

Probabilistic Surface Characterization for Safe Landing Hazard Detection and Avoidance (HDA)

NASA Technical Reports Server (NTRS)

Johnson, Andrew E. (Inventor); Ivanov, Tonislav I. (Inventor); Huertas, Andres (Inventor)

2015-01-01

Apparatuses, systems, computer programs and methods for performing hazard detection and avoidance for landing vehicles are provided. Hazard assessment takes into consideration the geometry of the lander. Safety probabilities are computed for a plurality of pixels in a digital elevation map. The safety probabilities are combined for pixels associated with one or more aim points and orientations. A worst case probability value is assigned to each of the one or more aim points and orientations.

A Review of Toxicity and Use and Handling Considerations for Guanidine, Guanidine Hydrochloride, and Urea.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ertell, Katherine GB

2006-03-27

This is a technical report prepared for Oregon Sustainable Energy, LLC, under Agreement 06-19 with PNNL's Office of Small Business Programs. The request was to perform a review of the toxicity and safe handling of guanidine. The request was later amended to add urea. This report summarizes the toxicity data available in the scientific literature and provides an interpretation of the results and recommendations for handling these compounds.

Peer assessment of aviation performance: inconsistent for good reasons.

PubMed

Roth, Wolff-Michael; Mavin, Timothy J

2015-03-01

Research into expertise is relatively common in cognitive science concerning expertise existing across many domains. However, much less research has examined how experts within the same domain assess the performance of their peer experts. We report the results of a modified think-aloud study conducted with 18 pilots (6 first officers, 6 captains, and 6 flight examiners). Pairs of same-ranked pilots were asked to rate the performance of a captain flying in a critical pre-recorded simulator scenario. Findings reveal (a) considerable variance within performance categories, (b) differences in the process used as evidence in support of a performance rating, (c) different numbers and types of facts (cues) identified, and (d) differences in how specific performance events affect choice of performance category and gravity of performance assessment. Such variance is consistent with low inter-rater reliability. Because raters exhibited good, albeit imprecise, reasons and facts, a fuzzy mathematical model of performance rating was developed. The model provides good agreement with observed variations. Copyright © 2014 Cognitive Science Society, Inc.

Pros and cons of multistory RC tunnel-form (box-type) buildings

USGS Publications Warehouse

Kalkan, E.; Yuksel, S.B.

2008-01-01

Tunnel-form structural systems (i.e., box systems), having a load-carrying mechanism composed of reinforced concrete (RC) shear walls and slabs only, have been prevailingly utilized in the construction of multistory residential units. The superiority of tunnel-form buildings over their conventional counterparts stems from the enhanced earthquake resistance they provide, and the considerable speed and economy of their construction. During recent earthquakes in Turkey, they exhibited better seismic performance in contrast to the damaged condition of a number of RC frames and dual systems (i.e., RC frames with shear wall configurations). Thus the tunnel-form system has become a primary construction technique in many seismically active regions. In this paper, the strengths and weaknesses of tunnel-form buildings are addressed in terms of design considerations and construction applications. The impacts of shear wall reinforcement ratio and its detailing on system ductility, loadcarrying capacity and failure mechanism under seismic forces are evaluated at section and global system levels. Influences of tension/compression coupling and wall openings on the response are also discussed. Three-dimensional nonlinear finite element models, verified through comparisons with experimental results, were used for numerical assessments. Findings from this projection provide useful information on adequate vertical reinforcement ratio and boundary reinforcement to achieve enhanced performance of tunnel-form buildings under seismic actions. Copyright ?? 2007 John Wiley & Sons, Ltd.

Vocational rehabilitation considerations for people with reflex sympathetic dystrophy.

PubMed

Smith, T S; Genoff, M C

1997-01-01

Reflex sympathetic dystrophy (RSD) is identified by the existence of pain, trophic changes, vasomotor instability, limited range of motion and swelling of an extremity. RSD is difficult to treat and prognosis is often poor. Although widely noted in the medical literature, the vocational rehabilitation literature has failed to address the potential role of vocational rehabilitation professionals in the social and economic employment outcome for people with RSD. Vocational rehabilitation professionals are defined as those performing vocational assessments, assessing transferable skills, determining adaptive skills, certifying residual work-related capacities, conducting vocational interest testing, coordinating efforts with pre-injury employers to assist in work reentry efforts, or performing other activities to assist in the placement or retraining of individuals with RSD. The sources used for this article include a review of the literature and observations of the authors. A vocational rehabilitation primer is provided. The following topics are addressed: the anatomical and physiological basis of RSD, treatment protocols, difficulties in accurately diagnosing RSD, influence of litigation, job placement considerations and vocational planning. As the vocational rehabilitation counsellor faces a greater number of people either diagnosed with RSD, or exhibiting RSD symptoms, he/she will be challenged to: (1) increase one's knowledge base about the etiology and treatment of RSD; (2) coordinate personal efforts with other professionals; and (3) provide personal counselling to address lifestyle and motivational factors.

The Psychometric Properties of Classroom Response System Data: A Case Study

NASA Astrophysics Data System (ADS)

Kortemeyer, Gerd

2016-08-01

Classroom response systems (often referred to as "clickers") have slowly gained adoption over the recent decade; however, critics frequently doubt their pedagogical value starting with the validity of the gathered responses: There is concern that students simply "click" random answers. This case study looks at different measures of response reliability, starting from a global look at correlations between formative clicker responses and summative examination performance to how clicker questions are used in context. It was found that clicker performance is a moderate indicator of course performance as a whole, and that while the psychometric properties of clicker items are more erratic than those of examination data, they still have acceptable internal consistency and include items with high discrimination. It was also found that clicker responses and item properties do provide highly meaningful feedback within a lecture context, i.e., when their position and function within lecture sessions are taken into consideration. Within this framework, conceptual questions provide measurably more meaningful feedback than items that require calculations.

The effect of visualizing the flow of multimedia content among and inside devices.

PubMed

Lee, Dong-Seok

2009-05-01

This study introduces a user interface, referred to as the flow interface, which provides a graphical representation of the movement of content among and inside audio/video devices. The proposed interface provides a different frame of reference with content-oriented visualization of the generation, manipulation, storage, and display of content as well as input and output. The flow interface was applied to a VCR/DVD recorder combo, one of the most complicated consumer products. A between-group experiment was performed to determine whether the flow interface helps users to perform various tasks and to examine the learning effect of the flow interface, particularly in regard to hooking up and recording tasks. The results showed that participants with access to the flow interface performed better in terms of success rate and elapsed time. In addition, the participants indicated that they could easily understand the flow interface. The potential of the flow interface for application to other audio video devices, and design issues requiring further consideration, are discussed.

Analyzing large-scale spiking neural data with HRLAnalysis™

PubMed Central

Thibeault, Corey M.; O'Brien, Michael J.; Srinivasa, Narayan

2014-01-01

The additional capabilities provided by high-performance neural simulation environments and modern computing hardware has allowed for the modeling of increasingly larger spiking neural networks. This is important for exploring more anatomically detailed networks but the corresponding accumulation in data can make analyzing the results of these simulations difficult. This is further compounded by the fact that many existing analysis packages were not developed with large spiking data sets in mind. Presented here is a software suite developed to not only process the increased amount of spike-train data in a reasonable amount of time, but also provide a user friendly Python interface. We describe the design considerations, implementation and features of the HRLAnalysis™ suite. In addition, performance benchmarks demonstrating the speedup of this design compared to a published Python implementation are also presented. The result is a high-performance analysis toolkit that is not only usable and readily extensible, but also straightforward to interface with existing Python modules. PMID:24634655

HALOE Science Investigation

NASA Technical Reports Server (NTRS)

Benner, D. Chris

1998-01-01

This cooperative agreement has investigated a number of spectroscopic problems of interest to the Halogen Occultation Experiment (HALOE). The types of studies performed are in two parts, namely, those that involve the testing and characterization of correlation spectrometers and those that provide basic molecular spectroscopic information. In addition, some solar studies were performed with the calibration data returned by HALOE from orbit. In order to accomplish this a software package was written as part of this cooperative agreement. The HALOE spectroscopic instrument package was used in various tests of the HALOE flight instrument. These included the spectral response test, the early stages of the gas response test and various spectral response tests of the detectors and optical elements of the instruments. Considerable effort was also expended upon the proper laboratory setup for many of the prelaunch tests of the HALOE flight instrument, including the spectral response test and the gas response test. These tests provided the calibration and the assurance that the calibration was performed correctly.

Unpacking the Black Box: Applications and Considerations for Using GPS Devices in Sport.

PubMed

Malone, James J; Lovell, Ric; Varley, Matthew C; Coutts, Aaron J

2017-04-01

Athlete-tracking devices that include global positioning system (GPS) and microelectrical mechanical system (MEMS) components are now commonplace in sport research and practice. These devices provide large amounts of data that are used to inform decision making on athlete training and performance. However, the data obtained from these devices are often provided without clear explanation of how these metrics are obtained. At present, there is no clear consensus regarding how these data should be handled and reported in a sport context. Therefore, the aim of this review was to examine the factors that affect the data produced by these athlete-tracking devices and to provide guidelines for collecting, processing, and reporting of data. Many factors including device sampling rate, positioning and fitting of devices, satellite signal, and data-filtering methods can affect the measures obtained from GPS and MEMS devices. Therefore researchers are encouraged to report device brand/model, sampling frequency, number of satellites, horizontal dilution of precision, and software/firmware versions in any published research. In addition, details of inclusion/exclusion criteria for data obtained from these devices are also recommended. Considerations for the application of speed zones to evaluate the magnitude and distribution of different locomotor activities recorded by GPS are also presented, alongside recommendations for both industry practice and future research directions. Through a standard approach to data collection and procedure reporting, researchers and practitioners will be able to make more confident comparisons from their data, which will improve the understanding and impact these devices can have on athlete performance.

Design considerations for rechargeable lithium batteries

NASA Technical Reports Server (NTRS)

Shen, D. H.; Huang, C.-K.; Davies, E.; Perrone, D.; Surampudi, S.; Halpert, Gerald

1993-01-01

Viewgraphs of a discussion of design considerations for rechargable lithium batteries. The objective is to determine the influence of cell design parameters on the performance of Li-TiS2 cells. Topics covered include cell baseline design and testing, cell design and testing, cell design parameters studies, and cell cycling performance.

Workplace Learning of High Performance Sports Coaches

ERIC Educational Resources Information Center

Rynne, Steven B.; Mallett, Clifford J.; Tinning, Richard

2010-01-01

The Australian coaching workplace (to be referred to as the State Institute of Sport; SIS) under consideration in this study employs significant numbers of full-time performance sport coaches and can be accurately characterized as a genuine workplace. Through a consideration of the interaction between what the workplace (SIS) affords the…

CEO performance appraisal: review and recommendations.

PubMed

Newman, J F; Tyler, L; Dunbar, D M

2001-01-01

CEO performance appraisal (PA) is very valuable to an organization, but the chances of obtaining a PA of high quality decrease as executive responsibility increases. The realities of CEO PA are that it: (1) is inevitable; (2) is creative and complex; (3) involves politics; and (4) has a significant effect on the organization and the executive. PA is conducted for legal and social requirements, to enhance communication, to provide opportunities for improvement, and to relate performance to compensation. This article discusses several problems with chief executive officer (CEO) PA and the contemporary approaches that seek to improve it. Three fundamental areas for evaluation are identified: (1) organizational success; (2) areawide health status; and (3) professional role fulfillment. These provide an outline for successful healthcare PA. In addition to a discussion of the strategic considerations behind a successful CEO PA system, several recommendations are offered for the implementation of the annual evaluation process. The final goal of CEO PA is to link its results to CEO incentive compensation. It is strongly recommended that some portion of the CEO's salary directly hinge on his performance in two critical areas: organizational effectiveness and community health status.

Exercise in the Heat. I. Fundamentals of Thermal Physiology, Performance Implications, and Dehydration

PubMed Central

Casa, Douglas J.

1999-01-01

Objective: To present the critical issue of exercise in the heat in a format that provides physiologic foundations (Part I) and then applies the established literature to substantial, usable guidelines that athletic trainers can implement on a daily basis when working with athletes who exercise in the heat (Part II). Data Sources: The databases MEDLINE and SPORT Discus were searched from 1980 to 1999, with the terms “hydration,” “heat,” “dehydration,” “cardiovascular,” “thermoregulatory,” “physiology,” and “exercise,” among others. The remaining citations are knowledge base. Data Synthesis: Part I introduces athletic trainers to some of the basic physiologic and performance responses to exercise in the heat. Conclusions/Recommendations: The medical supervision of athletes who exercise in hot environments requires an in-depth understanding of basic physiologic responses and performance considerations. Part I of this article aims to lay the scientific foundation for efficient implementation of the guidelines for monitoring athletic performance in the heat provided in Part II. PMID:16558572

Analysis of dispatching rules in a stochastic dynamic job shop manufacturing system with sequence-dependent setup times

NASA Astrophysics Data System (ADS)

Sharma, Pankaj; Jain, Ajai

2014-12-01

Stochastic dynamic job shop scheduling problem with consideration of sequence-dependent setup times are among the most difficult classes of scheduling problems. This paper assesses the performance of nine dispatching rules in such shop from makespan, mean flow time, maximum flow time, mean tardiness, maximum tardiness, number of tardy jobs, total setups and mean setup time performance measures viewpoint. A discrete event simulation model of a stochastic dynamic job shop manufacturing system is developed for investigation purpose. Nine dispatching rules identified from literature are incorporated in the simulation model. The simulation experiments are conducted under due date tightness factor of 3, shop utilization percentage of 90% and setup times less than processing times. Results indicate that shortest setup time (SIMSET) rule provides the best performance for mean flow time and number of tardy jobs measures. The job with similar setup and modified earliest due date (JMEDD) rule provides the best performance for makespan, maximum flow time, mean tardiness, maximum tardiness, total setups and mean setup time measures.

Competencies of Thai expertise teacher and PCK

NASA Astrophysics Data System (ADS)

Chantaranima, Tarntip; Yuenyong, Chokchai

2018-01-01

Pedagogical Content Knowledge (PCK) was accepted by worldwide Educators that it is a ubiquitous word in the preparation of teachers in the past decade. This study uses Pedagogical Content Knowledge (PCK) framework as a lens for classifying the guidelines and expectations for categorizing expertise teachers. Therefore, the paper tries to clarify the relationship between competencies of Thai expertise teacher and PCK elements. To promote skillful Thai teachers by offering them academic titles, the Office of the Teacher Civil Service and Education Personal Commission were developed to provide guidelines and expectations for categorizing expertise teachers (OTEPC, 2009). This article focuses on the guideline criteria which are three areas of consideration. The first area of consideration is teacher's disciplines including virtues and professional conducts. The second area of consideration is teacher's knowledge and teaching ability. The last area of consider is teacher's performance. It seemed that the OTEPC guideline pay too much attention on the first area. However, there are some issues of PCK appearing on the OTEPC teacher competency. The paper will discuss some suggestions of fill up PCK in the OTEPC guideline. The paper may have implication for Thailand teacher education.

Design and evaluation of basic standard encryption algorithm modules using nanosized complementary metal oxide semiconductor molecular circuits

NASA Astrophysics Data System (ADS)

Masoumi, Massoud; Raissi, Farshid; Ahmadian, Mahmoud; Keshavarzi, Parviz

2006-01-01

We are proposing that the recently proposed semiconductor-nanowire-molecular architecture (CMOL) is an optimum platform to realize encryption algorithms. The basic modules for the advanced encryption standard algorithm (Rijndael) have been designed using CMOL architecture. The performance of this design has been evaluated with respect to chip area and speed. It is observed that CMOL provides considerable improvement over implementation with regular CMOS architecture even with a 20% defect rate. Pseudo-optimum gate placement and routing are provided for Rijndael building blocks and the possibility of designing high speed, attack tolerant and long key encryptions are discussed.

Piezoelectric line moment actuator for active radiation control from light-weight structures

NASA Astrophysics Data System (ADS)

Jandak, Vojtech; Svec, Petr; Jiricek, Ondrej; Brothanek, Marek

2017-11-01

This article outlines the design of a piezoelectric line moment actuator used for active structural acoustic control. Actuators produce a dynamic bending moment that appears in the controlled structure resulting from the inertial forces when the attached piezoelectric stripe actuators start to oscillate. The article provides a detailed theoretical analysis necessary for the practical realization of these actuators, including considerations concerning their placement, a crucial factor in the overall system performance. Approximate formulas describing the dependency of the moment amplitude on the frequency and the required electric voltage are derived. Recommendations applicable for the system's design based on both theoretical and empirical results are provided.

Health service delivery in China: a literature review.

PubMed

Eggleston, Karen; Ling, Li; Qingyue, Meng; Lindelow, Magnus; Wagstaff, Adam

2008-02-01

We report the results of a review of the Chinese- and English-language literatures on service delivery in China, asking how well China's health-care providers perform and what determines their performance. Although data and methodological limitations suggest caution in drawing conclusions, a critical reading of the available evidence suggests that current health service delivery in China leaves room for improvement, in terms of quality, responsiveness to patients, efficiency, cost escalation, and equity. The literature suggests that these problems will not be solved by simply shifting ownership to the private sector or by simply encouraging providers -- public and private -- to compete with one another for individual patients. By contrast, substantial improvements could be (and in some places have already been) made by changing the way providers are paid -- shifting away from fee-for-service and the distorted price schedule. Other elements of 'active purchasing' by insurers could further improve outcomes. Rigorous evaluations, based on richer micro-level data, could considerably strengthen the evidence base for service delivery policy in China.

The Information Architecture of E-Commerce: An Experimental Study on User Performance and Preference

NASA Astrophysics Data System (ADS)

Wan Mohd, Wan Abdul Rahim; Md Noor, Nor Laila; Mehad, Shafie

Too often, designers of e-commerce web sites use models, concepts, guidelines, and designs that focus on the artifacts while ignoring the context in which the artifacts will be used. Furthermore, the link between culture and usability in web site IA phenomenon is still considered as uncharted area, as it lacks much theoretical consideration. In an effort toward addressing the aforementioned issues, our study provides a theoretical and empirical link between cultural and usability through the application of ‘Venustas' (Delight) drawn from the architectural field and Hofstede's cultural dimensions. We use Islamic culture as the case study and report on the experiment to investigate the effect of the IA designs based on the cultural dimensions on e-commerce web sites. The result provides partial empirical support to the theorized link between culture and usability based on the usability measurement on user performance and preference. In addition, practical web site IA cultural design prescriptions are also provided.

Very high frame rate volumetric integration of depth images on mobile devices.

PubMed

Kähler, Olaf; Adrian Prisacariu, Victor; Yuheng Ren, Carl; Sun, Xin; Torr, Philip; Murray, David

2015-11-01

Volumetric methods provide efficient, flexible and simple ways of integrating multiple depth images into a full 3D model. They provide dense and photorealistic 3D reconstructions, and parallelised implementations on GPUs achieve real-time performance on modern graphics hardware. To run such methods on mobile devices, providing users with freedom of movement and instantaneous reconstruction feedback, remains challenging however. In this paper we present a range of modifications to existing volumetric integration methods based on voxel block hashing, considerably improving their performance and making them applicable to tablet computer applications. We present (i) optimisations for the basic data structure, and its allocation and integration; (ii) a highly optimised raycasting pipeline; and (iii) extensions to the camera tracker to incorporate IMU data. In total, our system thus achieves frame rates up 47 Hz on a Nvidia Shield Tablet and 910 Hz on a Nvidia GTX Titan XGPU, or even beyond 1.1 kHz without visualisation.

Experimental Study on the Flexural Performance of Parallel Strand Bamboo Beams

PubMed Central

Zhou, Aiping; Bian, Yuling

2014-01-01

Searching for materials to provide proper housing with less emission and low energy becomes an urgent demand with the ever-growing population. Bamboo has gained a reputation as an ecofriendly, highly renewable source of material. Parallel Strand Bamboo (PSB) is a new biocomposite made of bamboo strips which has superiority performances than wood products. It has attracted considerable interests as a sustainable alternative for more traditional building materials. But the mechanical performance study of PSB as construction materials is still inadequate. Also, the structural behavior of PSB is not quite understood as conventional construction materials, which results in the difficulties to predict the performances of PSB structural members. To achieve this purpose, 4-point bending experiments for PSB beams were carried out. The flexural performances, mode of failure in bending, and the damage mechanism of PSB beams were investigated in this paper. PMID:24701141

Postoperative Stereotactic Body Radiation Therapy (SBRT) for Spine Metastases: A Critical Review to Guide Practice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Redmond, Kristin J., E-mail: kjanson3@jhmi.edu; Lo, Simon S.; Fisher, Charles

Postoperative stereotactic body radiation therapy (SBRT) for metastatic spinal tumors is increasingly being performed in clinical practice. Whereas the fundamentals of SBRT practice for intact spinal metastases are established, there are as yet no comprehensive practice guidelines for the postoperative indications. In particular, there are unique considerations for patient selection and treatment planning specific to postoperative spine SBRT that are critical for safe and effective management. The purpose of this critical review is to discuss the rationale for treatment, describe those factors affecting surgical decision making, introduce modern surgical trends, and summarize treatment outcomes for both conventional postoperative external beammore » radiation therapy and postoperative spine SBRT. Lastly, an in-depth practical discussion with respect to treatment planning and delivery considerations is provided to help guide optimal practice.« less

Future so bright? Delay discounting and consideration of future consequences predict academic performance among college drinkers.

PubMed

Acuff, Samuel F; Soltis, Kathryn E; Dennhardt, Ashley A; Borsari, Brian; Martens, Matthew P; Murphy, James G

2017-10-01

College student drinking is a major public health concern and can result in a range of negative consequences, from acute health risks to decreased academic performance and drop out. Harm reduction interventions have been developed to reduce problems associated with drinking but there is a need to identify specific risk/protective factors related to academic performance among college drinkers. Behavioral economics suggests that chronic alcohol misuse reflects a dysregulated behavioral process or reinforcer pathology-alcohol is overvalued and the value of prosocial rewards are sharply discounted due, in part, to their delay. This study examined delay discounting, consideration of future consequences (CFC) and protective behavioral strategies (PBS) as predictors of academic success (grade point average; GPA) and engagement (time devoted to academic activities) among 393 college drinkers (61% female). In multivariate models, PBS were associated with greater academic engagement, but were not with academic success. Lower discounting of delayed rewards and greater CFC were associated with both academic success and engagement among drinkers. Previous research suggests that future time orientation is malleable, and the current results provide support for efforts to enhance future time orientation as part of alcohol harm-reduction approaches. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

1L Mark-IV Target Design Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koehler, Paul E.

This presentation includes General Design Considerations; Current (Mark-III) Lower Tier; Mark-III Upper Tier; Performance Metrics; General Improvements for Material Science; General Improvements for Nuclear Science; Improving FOM for Nuclear Science; General Design Considerations Summary; Design Optimization Studies; Expected Mark-IV Performance: Material Science; Expected Mark-IV Performance: Nuclear Science (Disk); Mark IV Enables Much Wider Range of Nuclear-Science FOM Gains than Mark III; Mark-IV Performance Summary; Rod or Disk? Center or Real FOV?; and Project Cost and Schedule.

Robust design optimization method for centrifugal impellers under surface roughness uncertainties due to blade fouling

NASA Astrophysics Data System (ADS)

Ju, Yaping; Zhang, Chuhua

2016-03-01

Blade fouling has been proved to be a great threat to compressor performance in operating stage. The current researches on fouling-induced performance degradations of centrifugal compressors are based mainly on simplified roughness models without taking into account the realistic factors such as spatial non-uniformity and randomness of the fouling-induced surface roughness. Moreover, little attention has been paid to the robust design optimization of centrifugal compressor impellers with considerations of blade fouling. In this paper, a multi-objective robust design optimization method is developed for centrifugal impellers under surface roughness uncertainties due to blade fouling. A three-dimensional surface roughness map is proposed to describe the nonuniformity and randomness of realistic fouling accumulations on blades. To lower computational cost in robust design optimization, the support vector regression (SVR) metamodel is combined with the Monte Carlo simulation (MCS) method to conduct the uncertainty analysis of fouled impeller performance. The analyzed results show that the critical fouled region associated with impeller performance degradations lies at the leading edge of blade tip. The SVR metamodel has been proved to be an efficient and accurate means in the detection of impeller performance variations caused by roughness uncertainties. After design optimization, the robust optimal design is found to be more efficient and less sensitive to fouling uncertainties while maintaining good impeller performance in the clean condition. This research proposes a systematic design optimization method for centrifugal compressors with considerations of blade fouling, providing a practical guidance to the design of advanced centrifugal compressors.

Dual Fan Separator within the Universal Waste Management System

NASA Technical Reports Server (NTRS)

Stapleton, Tom; Converse, Dave; Broyan, James Lee, Jr.

2014-01-01

Since NASA's new spacecraft in development for both LEO and Deep Space capability have considerable crew volume reduction in comparison to the Space Shuttle, it is clear that NASA requires a smaller and less expensive commode. The UTAS Universal Waste Management System (UWMS) was designed to address these new constraints, resulting in an 80% volume reduction in the cabin while enhancing performance. Whereas all of the current space commodes use air flow to capture both urine and feces and separate air from the captured air/urine mixture, the UWMS commode and urine fans and the urine separator were combined into a single unit. This unit enables use of a single motor and motor controller, which provides considerable packaging and weight efficiency. In some of the intended platform applications for the UWMS, the urine is pumped to a water reclamation system. The ISS Urine Processor Assembly (UPA) system requires delivered urine to include less than 0.25% air inclusion. Air inclusion in centrifugal urine separators is greatly dependent on its rotational speed. To satisfy this requirement, a gear reducer was included, allowing the fans to rotate at a much higher speed than the separator. This new design, the Dual Fan Separator (DFS) has been designed, prototyped and tested. This paper will outline the studies and analysis performed to develop the design configuration for testing. The studies included a configuration trade study, dynamic stability analysis of the rotating bodies and a performance analysis of included labyrinth seals. NASA is considereing a program to fly the UWMS aboard the ISS as a flight experiment. The goal of the design activity is to elevate the Technical Readiness Level (TRL) of the Dual Fan Separator and determine if the concept is ready to be included in flight experiment deliverable.

The potential influence of rain on airfoil performance

NASA Technical Reports Server (NTRS)

Dunham, R. Earl, Jr.

1987-01-01

The potential influence of heavy rain on airfoil performance is discussed. Experimental methods for evaluating rain effects are reviewed. Important scaling considerations for extrapolating model data are presented. It is shown that considerable additional effort, both analytical and experimental, is necessary to understand the degree of hazard associated with flight operations in rain.

Student Application for Special Consideration for Examination Performance Following a Natural Disaster

ERIC Educational Resources Information Center

Collings, David; Garrill, Ashley; Johnston, Lucy

2018-01-01

Universities have a long-established tradition of granting students special consideration when circumstances beyond their control negatively affect performance in assessments. Typically, such situations affect only one student (e.g. medical emergencies) but we consider the impact of a natural disaster that led to all students being eligible for…

Proposed Performance-Based Metrics for the Future Funding of Graduate Medical Education: Starting the Conversation.

PubMed

Caverzagie, Kelly J; Lane, Susan W; Sharma, Niraj; Donnelly, John; Jaeger, Jeffrey R; Laird-Fick, Heather; Moriarty, John P; Moyer, Darilyn V; Wallach, Sara L; Wardrop, Richard M; Steinmann, Alwin F

2017-12-12

Graduate medical education (GME) in the United States is financed by contributions from both federal and state entities that total over $15 billion annually. Within institutions, these funds are distributed with limited transparency to achieve ill-defined outcomes. To address this, the Institute of Medicine convened a committee on the governance and financing of GME to recommend finance reform that would promote a physician training system that meets society's current and future needs. The resulting report provided several recommendations regarding the oversight and mechanisms of GME funding, including implementation of performance-based GME payments, but did not provide specific details about the content and development of metrics for these payments. To initiate a national conversation about performance-based GME funding, the authors asked: What should GME be held accountable for in exchange for public funding? In answer to this question, the authors propose 17 potential performance-based metrics for GME funding that could inform future funding decisions. Eight of the metrics are described as exemplars to add context and to help readers obtain a deeper understanding of the inherent complexities of performance-based GME funding. The authors also describe considerations and precautions for metric implementation.

Treatment of Deaf Clients: Ethical Considerations for Professionals in Psychology

PubMed Central

Boness, Cassandra L.

2016-01-01

Providing therapy to deaf clients raises important ethical considerations for psychologists related to competence; multiple relationships and boundary issues; confidentiality; assessment, diagnosis, and evaluation; and communication and using interpreters. In evaluating and addressing these, psychologists must consider the APA’s Ethics Code and other relevant issues (e.g., ADA) necessary to provide ethical treatment. The current article provides background, ethical considerations, principles and standards relevant to the treatment of deaf clients, and recommendations to support psychologists, training programs, and the field. Psychologists have the responsibility to guarantee that the benefits of mental health treatment are fairly and justly provided to this traditionally underserved population. PMID:27917030

Transition to Office-based Obstetric and Gynecologic Procedures: Safety, Technical, and Financial Considerations.

PubMed

Peacock, Lisa M; Thomassee, May E; Williams, Valerie L; Young, Amy E

2015-06-01

Office-based surgery is increasingly desired by patients and providers due to ease of access, overall efficiency, reimbursement, and satisfaction. The adoption of office-based surgery requires careful consideration of safety, efficacy, cost, and feasibility within a providers practice. This article reviews the currently available data regarding patient and provider satisfaction as well as practical considerations of staffing, equipment, and supplies. To aid the practitioner, issues of office-based anesthesia and safety with references to currently available national guidelines and protocols are provided. Included is a brief review of billing, coding, and reimbursement. Technical procedural aspects with information and recommendations are summarized.

The plan for the economic evaluation of the Public Service Communication Satellite system

NASA Technical Reports Server (NTRS)

1977-01-01

A total plan for the economic evaluation of the PSCS public service communication satellite program within domestic markets is presented. It extends from the present through the planning, performance and evaluation of economic experiments following the launch of the PSCS, and includes the consideration of how the results of these experiments impact the transfer from demonstration to operations. The implementation of this plan will provide NASA with information needed to understand and manage the economic and social impacts of the PSCS program.

The plan for the economic evaluation of the public service communication satellite system

NASA Technical Reports Server (NTRS)

1977-01-01

A plan for the economic evaluation of the Public Service Communications Satellite (PSCS) within domestic markets is presented. It extends through the planning, performance and evaluation of economic experiments following the launch of the PSCS in 1982, and includes the consideration of how the results of these experiments impact the transfer from demonstration to operations. The implementation of this plan will provide information needed to understand and manage the economic and social impacts of the PSCS program.

Digital avionics systems - Overview of FAA/NASA/industry-wide briefing

NASA Technical Reports Server (NTRS)

Larsen, William E.; Carro, Anthony

1986-01-01

The effects of incorporating digital technology into the design of aircraft on the airworthiness criteria and certification procedures for aircraft are investigated. FAA research programs aimed at providing data for the functional assessment of aircraft which use digital systems for avionics and flight control functions are discussed. The need to establish testing, assurance assessment, and configuration management technologies to insure the reliability of digital systems is discussed; consideration is given to design verification, system performance/robustness, and validation technology.

Scanning through the pain: ergonomic considerations for performing echocardiography of animals.

PubMed

Macdonald, Kristin; Scott, Patrick

2013-03-01

Work-related musculoskeletal disorders (MSD) are a common problem among sonographers, with prevalence in human sonographers of 80-90%. However, this problem appears to be largely neglected in the veterinary literature. Awareness of MSDs, ergonomic redesign, workplace management, and physical self-care are components to reducing the risk of developing MSDs. Work-place redesign and alterations in work flow management are discussed, and a template for a more ergonomically favorable echocardiogram table is provided. Copyright © 2013 Elsevier B.V. All rights reserved.

Automated Diagnosis Coding with Combined Text Representations.

PubMed

Berndorfer, Stefan; Henriksson, Aron

2017-01-01

Automated diagnosis coding can be provided efficiently by learning predictive models from historical data; however, discriminating between thousands of codes while allowing a variable number of codes to be assigned is extremely difficult. Here, we explore various text representations and classification models for assigning ICD-9 codes to discharge summaries in MIMIC-III. It is shown that the relative effectiveness of the investigated representations depends on the frequency of the diagnosis code under consideration and that the best performance is obtained by combining models built using different representations.

Compressive behavior of energy-saving fired facing brick composite wall

NASA Astrophysics Data System (ADS)

Guo, Kai; Wu, Cai

2018-03-01

The energy-saving fired facing brick composite wall has a broad development prospects due to its merits of thermal insulation, energy conservation, beautiful, and natural. The construction and characteristics of this wall are introduced and analyzed in this paper. Experimental studies of samples are also conducted to investigate its compressive performance. The results show that the energy-saving fired facing brick composite wall has high compressive capacity. It has considerable application prospect, the study in this paper provides foundation to further studies.

Design and Evaluation of an Energy-Dense, Light-Weight Combat Ration to Sustain Land Forces Involved in High-Intensity, Short-Duration Operations

DTIC Science & Technology

2015-03-01

8260 kJ provided, and was less than the target of at least 90% consumption . The effect of this on cognitive and physical performance is unknown and...texture and flavour. Packaging, serve size, palatability in different environments, effects on morale, ease of consumption , preparation considerations...acids (found in fatty fish ), which may have several beneficial effects on military health and fitness (Lewis et al, 2011; Lewis & Bailes, 2011

Rotative balance of the I.M.F. Lille and associated experimental techniques

NASA Technical Reports Server (NTRS)

Verbrugge, R.

1981-01-01

The study of aerodynamic effects at high incidence associated with motions of wide amplitude incorporating continuous rotations requires the consideration of coupled effects, which are generally nonlinear, in a formulation of equations of motion. A rotative balance designed to simulate such maneuvers in a windtunnel was created to form a test medium for analytical studies. A general description of the assembly is provided by considering two main ranges of application. The capacities and performance of the assembly are discussed.

Apparatus and method for optimal phase balancing using dynamic programming with spatial consideration

DOEpatents

Robertazzi, Thomas G.; Skiena, Steven; Wang, Kai

2017-08-08

Provided are an apparatus and method for load-balancing of a three-phase electric power distribution system having a multi-phase feeder, including obtaining topology information of the feeder identifying supply points for customer loads and feeder sections between the supply points, obtaining customer information that includes peak customer load at each of the points between each of the feeder sections, performing a phase balancing analysis, and recommending phase assignment at the customer load supply points.

Pediatric emergencies.

PubMed

Ryan, Erin

2015-03-01

It is important that pediatric critical care nurses possess a thorough understanding of their patient and be able to provide exceptional care, especially during emergent situations in the operating room. This care is accomplished by assessing the pediatric patient, dosing medications accurately and effectively, and performing effective Pediatric Advanced Life Support. Pediatric patients present with unique anatomy, physiology, and pathophysiology. Emergencies are reviewed according to organ system, with a focus on definition, presentation, pathophysiology, management, and special considerations. Copyright © 2015 Elsevier Inc. All rights reserved.

Evaluating language environment analysis system performance for Chinese: a pilot study in Shanghai.

PubMed

Gilkerson, Jill; Zhang, Yiwen; Xu, Dongxin; Richards, Jeffrey A; Xu, Xiaojuan; Jiang, Fan; Harnsberger, James; Topping, Keith

2015-04-01

The purpose of this study was to evaluate performance of the Language Environment Analysis (LENA) automated language-analysis system for the Chinese Shanghai dialect and Mandarin (SDM) languages. Volunteer parents of 22 children aged 3-23 months were recruited in Shanghai. Families provided daylong in-home audio recordings using LENA. A native speaker listened to 15 min of randomly selected audio samples per family to label speaker regions and provide Chinese character and SDM word counts for adult speakers. LENA segment labeling and counts were compared with rater-based values. LENA demonstrated good sensitivity in identifying adult and child; this sensitivity was comparable to that of American English validation samples. Precision was strong for adults but less so for children. LENA adult word count correlated strongly with both Chinese characters and SDM word counts. LENA conversational turn counts correlated similarly with rater-based counts after the exclusion of three unusual samples. Performance related to some degree to child age. LENA adult word count and conversational turn provided reasonably accurate estimates for SDM over the age range tested. Theoretical and practical considerations regarding LENA performance in non-English languages are discussed. Despite the pilot nature and other limitations of the study, results are promising for broader cross-linguistic applications.

Sleep, circadian rhythms, and psychomotor vigilance.

PubMed

Van Dongen, Hans P A; Dinges, David F

2005-04-01

Psychomotor vigilance performance is highly relevant to athletic performance. It is influenced by a sleep homeostatic process, which builds up pressure for sleep during wakefulness and dissipates this pressure during sleep, and a circadian rhythm process, which produces a waxing and waning of pressure for wakefulness over a 24 hours of the day. During total sleep deprivation, these two processes cause performance to deteriorate progressively over days, modulated within days by further performance reductions at night and relative improvements during the daytime. As the homeostatic pressure for sleep builds up higher across prolonged wakefulness, the rate of dissipation of that pressure during subsequent sleep is enhanced exponentially, so that even brief periods of sleep provide significant performance recuperation. Nevertheless, sleep restriction practiced on a chronic basis induces cumulative performance deficits of the same order of magnitude as observed during total sleep deprivation. There are also considerable individual differences in the degree of vulnerability to performance impairment from sleep loss, and these differences represent a trait.

Case of two electrostatics problems: Can providing a diagram adversely impact introductory physics students' problem solving performance?

NASA Astrophysics Data System (ADS)

Maries, Alexandru; Singh, Chandralekha

2018-06-01

Drawing appropriate diagrams is a useful problem solving heuristic that can transform a problem into a representation that is easier to exploit for solving it. One major focus while helping introductory physics students learn effective problem solving is to help them understand that drawing diagrams can facilitate problem solution. We conducted an investigation in which two different interventions were implemented during recitation quizzes in a large enrollment algebra-based introductory physics course. Students were either (i) asked to solve problems in which the diagrams were drawn for them or (ii) explicitly told to draw a diagram. A comparison group was not given any instruction regarding diagrams. We developed rubrics to score the problem solving performance of students in different intervention groups and investigated ten problems. We found that students who were provided diagrams never performed better and actually performed worse than the other students on three problems, one involving standing sound waves in a tube (discussed elsewhere) and two problems in electricity which we focus on here. These two problems were the only problems in electricity that involved considerations of initial and final conditions, which may partly account for why students provided with diagrams performed significantly worse than students who were not provided with diagrams. In order to explore potential reasons for this finding, we conducted interviews with students and found that some students provided with diagrams may have spent less time on the conceptual analysis and planning stage of the problem solving process. In particular, those provided with the diagram were more likely to jump into the implementation stage of problem solving early without fully analyzing and understanding the problem, which can increase the likelihood of mistakes in solutions.

The need for the use of XACML access control policy in a distributed EHR and some performance considerations.

PubMed

Sucurovic, Snezana; Milutinovic, Veljko

2008-01-01

The Internet based distributed large scale information systems implements attribute based access control (ABAC) rather than Role Based Access Control (RBAC). The reason is that the Internet is identity less and that ABAC scales better. EXtensible Access Control Markup Language is standardized language for writing access control policies, access control requests and access control responses in ABAC. XACML can provide decentralized administration and credentials distribution. In year 2002 version of CEN ENV 13 606 attributes have been attached to EHCR components and in such a system ABAC and XACML have been easy to implement. This paper presents writing XACML policies in the case when attributes are in hierarchical structure. It is presented two possible solutions to write XACML policy in that case and that the solution when set functions are used is more compact and provides 10% better performances.

New Automotive Air Conditioning System Simulation Tool Developed in MATLAB/Simulink

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kiss, T.; Chaney, L.; Meyer, J.

Further improvements in vehicle fuel efficiency require accurate evaluation of the vehicle's transient total power requirement. When operated, the air conditioning (A/C) system is the largest auxiliary load on a vehicle; therefore, accurate evaluation of the load it places on the vehicle's engine and/or energy storage system is especially important. Vehicle simulation software, such as 'Autonomie,' has been used by OEMs to evaluate vehicles' energy performance. A transient A/C simulation tool incorporated into vehicle simulation models would also provide a tool for developing more efficient A/C systems through a thorough consideration of the transient A/C system performance. The dynamic systemmore » simulation software Matlab/Simulink was used to develop new and more efficient vehicle energy system controls. The various modeling methods used for the new simulation tool are described in detail. Comparison with measured data is provided to demonstrate the validity of the model.« less

Phased-array-fed antenna configuration study, volume 2

NASA Technical Reports Server (NTRS)

Sorbello, R. M.; Zaghloul, A. I.; Lee, B. S.; Siddiqi, S.; Geller, B. D.

1983-01-01

Increased capacity in future satellite systems can be achieved through antenna systems which provide multiplicity of frequency reuses at K sub a band. A number of antenna configurations which can provide multiple fixed spot beams and multiple independent spot scanning beams at 20 GHz are addressed. Each design incorporates a phased array with distributed MMIC amplifiers and phasesifters feeding a two reflector optical system. The tradeoffs required for the design of these systems and the corresponding performances are presented. Five final designs are studied. In so doing, a type of MMIC/waveguide transition is described, and measured results of the breadboard model are presented. Other hardware components developed are described. This includes a square orthomode transducer, a subarray fed with a beamforming network to measure scanning performance, and another subarray used to study mutual coupling considerations. Discussions of the advantages and disadvantages of the final design are included.

A novel X-ray diffractometer for studies of liquid-liquid interfaces.

PubMed

Murphy, Bridget M; Greve, Matthais; Runge, Benjamin; Koops, Christian T; Elsen, Annika; Stettner, Jochim; Seeck, Oliver H; Magnussen, Olaf M

2014-01-01

The study of liquid-liquid interfaces with X-ray scattering methods requires special instrumental considerations. A dedicated liquid surface diffractometer employing a tilting double-crystal monochromator in Bragg geometry has been designed. This diffractometer allows reflectivity and grazing-incidence scattering measurements of an immobile mechanically completely decoupled liquid sample, providing high mechanical stability. The available energy range is from 6.4 to 29.4 keV, covering many important absorption edges. The instrument provides access in momentum space out to 2.54 Å(-1) in the surface normal and out to 14.8 Å(-1) in the in-plane direction at 29.4 keV. Owing to its modular design the diffractometer is also suitable for heavy apparatus such as vacuum chambers. The instrument performance is described and examples of X-ray reflectivity studies performed under in situ electrochemical control and on biochemical model systems are given.

A climate model projection weighting scheme accounting for performance and interdependence

NASA Astrophysics Data System (ADS)

Knutti, Reto; Sedláček, Jan; Sanderson, Benjamin M.; Lorenz, Ruth; Fischer, Erich M.; Eyring, Veronika

2017-02-01

Uncertainties of climate projections are routinely assessed by considering simulations from different models. Observations are used to evaluate models, yet there is a debate about whether and how to explicitly weight model projections by agreement with observations. Here we present a straightforward weighting scheme that accounts both for the large differences in model performance and for model interdependencies, and we test reliability in a perfect model setup. We provide weighted multimodel projections of Arctic sea ice and temperature as a case study to demonstrate that, for some questions at least, it is meaningless to treat all models equally. The constrained ensemble shows reduced spread and a more rapid sea ice decline than the unweighted ensemble. We argue that the growing number of models with different characteristics and considerable interdependence finally justifies abandoning strict model democracy, and we provide guidance on when and how this can be achieved robustly.

Intelligent Control for Drag Reduction on the X-48B Vehicle

NASA Technical Reports Server (NTRS)

Griffin, Brian Joseph; Brown, Nelson Andrew; Yoo, Seung Yeun

2011-01-01

This paper focuses on the development of an intelligent control technology for in-flight drag reduction. The system is integrated with and demonstrated on the full X-48B nonlinear simulation. The intelligent control system utilizes a peak-seeking control method implemented with a time-varying Kalman filter. Performance functional coordinate and magnitude measurements, or independent and dependent parameters respectively, are used by the Kalman filter to provide the system with gradient estimates of the designed performance function which is used to drive the system toward a local minimum in a steepestdescent approach. To ensure ease of integration and algorithm performance, a single-input single-output approach was chosen. The framework, specific implementation considerations, simulation results, and flight feasibility issues related to this platform are discussed.

VHF command system study. [spectral analysis of GSFC VHF-PSK and VHF-FSK Command Systems

NASA Technical Reports Server (NTRS)

Gee, T. H.; Geist, J. M.

1973-01-01

Solutions are provided to specific problems arising in the GSFC VHF-PSK and VHF-FSK Command Systems in support of establishment and maintenance of Data Systems Standards. Signal structures which incorporate transmission on the uplink of a clock along with the PSK or FSK data are considered. Strategies are developed for allocating power between the clock and data, and spectral analyses are performed. Bit error probability and other probabilities pertinent to correct transmission of command messages are calculated. Biphase PCM/PM and PCM/FM are considered as candidate modulation techniques on the telemetry downlink, with application to command verification. Comparative performance of PCM/PM and PSK systems is given special attention, including implementation considerations. Gain in bit error performance due to coding is also considered.

Design of an optimised readout architecture for phase-change probe memory using Ge2Sb2Te5 media

NASA Astrophysics Data System (ADS)

Wang, Lei; Wright, C. David; Aziz, Mustafa M.; Yang, Ci-Hui; Yang, Guo-Wei

2014-02-01

Phase-change probe memory has recently received considerable attention on its writing performance, while its readout performance is rarely evaluated. Therefore, a three-dimensional readout model has been developed for the first time to calculate the reading contrast by varying the electrical conductivities and the thickness of the capping and under layers as well as the thickness of the Ge2Sb2Te5 layer. It is found that a phase-change probe architecture, consisting of a 10 nm Ge2Sb2Te5 layer sandwiched by a 2 nm, 50 Ω-1 m-1 capping layer and a 40 nm, 5 × 106 Ω-1 m-1 under layer, has the capability of providing the optimal readout performance.

The Surgical Workforce and Surgical Provider Productivity in Sierra Leone: A Countrywide Inventory.

PubMed

Bolkan, Håkon A; Hagander, Lars; von Schreeb, Johan; Bash-Taqi, Donald; Kamara, Thaim B; Salvesen, Øyvind; Wibe, Arne

2016-06-01

Limited data exist on surgical providers and their scope of practice in low-income countries (LICs). The aim of this study was to assess the distribution and productivity of all surgical providers in an LIC, and to evaluate correlations between the surgical workforce availability, productivity, rates, and volume of surgery at the district and hospital levels. Data on surgeries and surgical providers from 56 (93.3 %) out of 60 healthcare facilities providing surgery in Sierra Leone in 2012 were retrieved between January and May 2013 from operation theater logbooks and through interviews with key informants. The Sierra Leonean surgical workforce consisted of 164 full-time positions, equal to 2.7 surgical providers/100,000 inhabitants. Non-specialists performed 52.8 % of all surgeries. In rural areas, the densities of specialists and physicians were 26.8 and 6.3 times lower, respectively, compared with urban areas. The average individual productivity was 2.8 surgeries per week, and varied considerably between the cadres of surgical providers and locations. When excluding four centers that only performed ophthalmic surgery, there was a positive correlation between a facility's volume of surgery and the productivity of its surgical providers (r s = 0.642, p < 0.001). Less than half of all of the surgery in Sierra Leone is performed by specialists. Surgical providers were significantly more productive in healthcare facilities with higher volumes of surgery. If all surgical providers were as productive as specialists in the private non-profit sector (5.1 procedures/week), the national volume of surgery would increase by 85 %.

Thin coatings in packaging: Fundamental and practical aspects

NASA Astrophysics Data System (ADS)

Thorne, N. A.

1996-01-01

A beverage or food can is very much a functionalized product, the overall performance characteristics being achieved by the use of several materials each of which provides a specific property. Schematically, the metal substrate provides the mechanical and barrier properties, whereby the chemical resistance is provided by specific surface treatments to the metal surface and the application of a thin organic coating. Between about 4-15 μm in thickness, this organic coating has a double protective role, as it must protect the substrate from the foodstuff (corrosion) and the foodstuff from the substrate (taste..) over the required shelflife of the product. To give an idea of the industrial importance of this application, over 100 billion beverage cans per year are produced worldwide, each being individually sprayed with a protective organic layer. To perform correctly these coatings need to possess the following characteristics: —ability to be applied in thin, homogeneous layers without macroscopic or microscopic defects, —sufficient adhesion with the substrate and possess considerable interface stability —mechanical properties sufficient to withstand the can forming operations —intrinsic diffusion barrier properties necessary to prevent significant interaction with the substrate —sufficient chemical resistance to withstand any significant modification of the coating structure and hence intrinsic properties induced by the foodstuff Whereas a considerable amount of scientific attention has been applied to ``bulk'' systems, such as the mechanical properties of epoxies used for composite materials, diffusion in polymer packaging..., little published work is available concerning the specific properties of these thin coatings. The task is not helped by the commercial nature of the resin formulations used, the need to adapt these formulations to the multitude of industrial operations and the physical size of the coatings. The above coating properties will be discussed in relation to the ability to understand the underlying mechanisms involved, to measure the required properties and in the long term predict coating performance.

What information is provided in transcripts and Medical Student Performance Records from Canadian Medical Schools? A retrospective cohort study.

PubMed

Robins, Jason A; McInnes, Matthew D F; Esmail, Kaisra

2014-01-01

Resident selection committees must rely on information provided by medical schools in order to evaluate candidates. However, this information varies between institutions, limiting its value in comparing individuals and fairly assessing their quality. This study investigates what is included in candidates' documentation, the heterogeneity therein, as well as its objective data. Samples of recent transcripts and Medical Student Performance Records were anonymised prior to evaluation. Data were then extracted by two independent reviewers blinded to the submitting university, assessing for the presence of pre-selected criteria; disagreement was resolved through consensus. The data were subsequently analysed in multiple subgroups. Inter-rater agreement equalled 92%. Inclusion of important criteria varied by school, ranging from 22.2% inclusion to 70.4%; the mean equalled 47.4%. The frequency of specific criteria was highly variable as well. Only 17.7% of schools provided any basis for comparison of academic performance; the majority detailed only status regarding pass or fail, without any further qualification. Considerable heterogeneity exists in the information provided in official medical school documentation, as well as markedly little objective data. Standardization may be necessary in order to facilitate fair comparison of graduates from different institutions. Implementation of objective data may allow more effective intra- and inter-scholastic comparison.

Consideration of Cosmetic Surgery As Part of Women's Benefit-Provisioning Mate Retention Strategy.

PubMed

Atari, Mohammad; Barbaro, Nicole; Sela, Yael; Shackelford, Todd K; Chegeni, Razieh

2017-01-01

Individuals perform mate retention behaviors to minimize the risk of partner infidelity and relationship dissolution. The current study investigates whether consideration of cosmetic surgery can be conceptualized as part of a broader strategy of mate retention for women, but not men. We hypothesized that women's consideration of cosmetic surgery would be positively associated with performance frequencies of Benefit-Provisioning and Cost-Inflicting mate retention behaviors. We recruited 203 individuals (54% women) in committed heterosexual relationships from Tehran, Iran. Results indicate a positive association between consideration of cosmetic surgery and Benefit-Provisioning mate retention behaviors for women, but not men. There was no association between consideration of cosmetic surgery and Cost-Inflicting mate retention behaviors. Women therefore may consider cosmetic surgery to improve their physical attractiveness as part of a Benefit-Provisioning strategy to retain a long-term mate. We discuss limitations of the study and highlight future directions for research from an evolutionary perspective.

Habitability research priorities for the International Space Station and beyond.

PubMed

Whitmore, M; Adolf, J A; Woolford, B J

2000-09-01

Advanced technology and the desire to explore space have resulted in increasingly longer manned space missions. Long Duration Space Flights (LDSF) have provided a considerable amount of scientific research on the ability of humans to adapt and function in microgravity environments. In addition, studies conducted in analogous environments, such as winter-over expeditions in Antarctica, have complemented the scientific understanding of human performance in LDSF. These findings indicate long duration missions may take a toll on the individual, both physiologically and psychologically, with potential impacts on performance. Significant factors in any manned LDSF are habitability, workload and performance. They are interrelated and influence one another, and therefore necessitate an integrated research approach. An integral part of this approach will be identifying and developing tools not only for assessment of habitability, workload, and performance, but also for prediction of these factors as well. In addition, these tools will be used to identify and provide countermeasures to minimize decrements and maximize mission success. The purpose of this paper is to identify research goals and methods for the International Space Station (ISS) in order to identify critical factors and level of impact on habitability, workload, and performance, and to develop and validate countermeasures. Overall, this approach will provide the groundwork for creating an optimal environment in which to live and work onboard ISS as well as preparing for longer planetary missions.

Research Priorities for the International Space Station and Beyond

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; Adolf, Jurine A.; Woolford, Barbara J.

1999-01-01

Advanced technology and the desire to explore space have resulted in increasingly longer manned space missions. Long Duration Space Flights (LDSF) have provided a considerable amount of scientific research on the ability of humans to adapt and function in microgravity environments. In addition, studies conducted in analogous environments, such as winter-over expeditions in Antarctica, have complemented the scientific understanding of human performance in LDSF. These findings indicate long duration missions may take a toll on the individual, both physiologically and psychologically, with potential impacts on performance. Significant factors in any manned LDSF are habitability, workload and performance. They are interrelated and influence one another, and therefore necessitate an integrated research approach. An integral part of this approach will be identifying and developing tools not only for assessment of habitability, workload, and performance, but also for prediction of these factors as well. In addition, these tools will be used to identify and provide countermeasures to minimize decrements and maximize mission success. The purpose of this paper is to identify research goals and methods for the International Space Station (ISS) in order to identify critical factors and level of impact on habitability, workload, and performance, and to develop and validate countermeasures. Overall, this approach will provide the groundwork for creating an optimal environment in which to live and work onboard ISS as well as preparing for longer planetary missions.

Sensor fusion approaches for EMI and GPR-based subsurface threat identification

NASA Astrophysics Data System (ADS)

Torrione, Peter; Morton, Kenneth, Jr.; Besaw, Lance E.

2011-06-01

Despite advances in both electromagnetic induction (EMI) and ground penetrating radar (GPR) sensing and related signal processing, neither sensor alone provides a perfect tool for detecting the myriad of possible buried objects that threaten the lives of Soldiers and civilians. However, while neither GPR nor EMI sensing alone can provide optimal detection across all target types, the two approaches are highly complementary. As a result, many landmine systems seek to make use of both sensing modalities simultaneously and fuse the results from both sensors to improve detection performance for targets with widely varying metal content and GPR responses. Despite this, little work has focused on large-scale comparisons of different approaches to sensor fusion and machine learning for combining data from these highly orthogonal phenomenologies. In this work we explore a wide array of pattern recognition techniques for algorithm development and sensor fusion. Results with the ARA Nemesis landmine detection system suggest that nonlinear and non-parametric classification algorithms provide significant performance benefits for single-sensor algorithm development, and that fusion of multiple algorithms can be performed satisfactorily using basic parametric approaches, such as logistic discriminant classification, for the targets under consideration in our data sets.

Ethical considerations of transparency, informed consent, and nudging in a patient with paediatric aortic stenosis and symptomatic left ventricular endocardial fibroelastosis.

PubMed

Mavroudis, Constantine D; Cook, Thomas; Jacobs, Jeffrey P; Mavroudis, Constantine

2016-12-01

A 9-year-old boy who was born with bicuspid aortic stenosis underwent two unsuccessful aortic valvuloplasty interventions, and by 2 years of age he developed restrictive cardiomyopathy caused by left ventricular endocardial fibroelastosis and diastolic dysfunction. The attending cardiologist referred the patient to a high-volume, high-profile congenital cardiac surgical programme 1000 miles away that has a team with considerable experience with left ventricular endocardial fibroelastosis resection and a reputation of achieving good results. Owing to problems with insurance coverage, the parents sought other options for the care of their child in their home state. Dr George Miller is a well-respected local congenital and paediatric cardiac surgeon with considerable experience with the Ross operation as well as with right ventricular endocardial fibroelastosis resection. When talking with Dr Miller, he implied that there is little difference between right ventricular endocardial fibroelastosis and left ventricular endocardial fibroelastosis resection, and stated that he would perform the operation with low mortality based on his overall experience. Dr Miller stated that the local institution could provide an equivalent surgical procedure with comparable outcomes, without the patient and family having to travel out of state. A fundamental dilemma that often arises in clinical surgical practice concerns the conduct of assessing and performing new procedures, especially in rare cases, for which the collective global experience is scant. Although Dr Miller has performed right ventricular endocardial fibroelastosis resection, this procedure differs from left ventricular endocardial fibroelastosis resection, and he cannot be sure that he will indeed be able to perform the procedure better than the high-volume surgeon. This ethical situation is best understood in terms of the principles of respect for patient autonomy, beneficence, non-maleficence, and justice. The tension between the imperatives of beneficence and the obligation to respect the autonomy of the patient by acting only with the patient's best interest in mind is discussed.

76 FR 67774 - Board of Governors; Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-02

..., Financial Statements and Annual Report. 6. Consideration of Fiscal Year 2011 Comprehensive Statement and Annual Performance Plan. 7. Consideration of Fiscal Year 2012 Integrated Financial Plan. 8. Consideration.... Strategic Issues. 2. Financial Matters. Tuesday, November 15 at 1:30 p.m. (Open) 1. Approval of Minutes of...

Considerations for Estimating Electrode Performance in Li-Ion Cells

NASA Technical Reports Server (NTRS)

Bennett, William R.

2012-01-01

Advanced electrode materials with increased specific capacity and voltage performance are critical to the development of Li-ion batteries with increased specific energy and energy density. Although performance metrics for individual electrodes are critically important, a fundamental understanding of the interactions of electrodes in a full cell is essential to achieving the desired performance, and for establishing meaningful goals for electrode performance. This paper presents practical design considerations for matching positive and negative electrodes in a viable design. Methods for predicting cell-level discharge voltage, based on laboratory data for individual electrodes, are presented and discussed.

Rapid Classification of Ordinary Chondrites Using Raman Spectroscopy

NASA Technical Reports Server (NTRS)

Fries, M.; Welzenbach, L.

2014-01-01

Classification of ordinary chondrites is typically done through measurements of the composition of olivine and pyroxenes. Historically, this measurement has usually been performed via electron microprobe, oil immersion or other methods which can be costly through lost sample material during thin section preparation. Raman microscopy can perform the same measurements but considerably faster and with much less sample preparation allowing for faster classification. Raman spectroscopy can facilitate more rapid classification of large amounts of chondrites such as those retrieved from North Africa and potentially Antarctica, are present in large collections, or are submitted to a curation facility by the public. With development, this approach may provide a completely automated classification method of all chondrite types.

Particle Filters for Real-Time Fault Detection in Planetary Rovers

NASA Technical Reports Server (NTRS)

Dearden, Richard; Clancy, Dan; Koga, Dennis (Technical Monitor)

2001-01-01

Planetary rovers provide a considerable challenge for robotic systems in that they must operate for long periods autonomously, or with relatively little intervention. To achieve this, they need to have on-board fault detection and diagnosis capabilities in order to determine the actual state of the vehicle, and decide what actions are safe to perform. Traditional model-based diagnosis techniques are not suitable for rovers due to the tight coupling between the vehicle's performance and its environment. Hybrid diagnosis using particle filters is presented as an alternative, and its strengths and weakeners are examined. We also present some extensions to particle filters that are designed to make them more suitable for use in diagnosis problems.

Strategic hospital alliances: impact on financial performance.

PubMed

Clement, J P; McCue, M J; Luke, R D; Bramble, J D; Rossiter, L F; Ozcan, Y A; Pai, C W

1997-01-01

Acute care hospitals have increasingly been forming local strategic hospital alliances (SHAs), which consume considerable resources in forming and may affect the competitiveness of provider markets. This research shows that SHAs and market factors, which have been perceived to be threats to hospitals, are related to hospitals' financial performance. Among the findings are that SHA members have higher net revenues but that they are not more effective at cost control. Nor do the higher net revenues result in higher cash flow. However, increasing SHA penetration in a market is related to lower net revenues per case. In addition, the penetration of private health maintenance organizations in markets is associated with lower revenues and expenses.

Automatic reactor control system for transient operation

NASA Astrophysics Data System (ADS)

Lipinski, Walter C.; Bhattacharyya, Samit K.; Hanan, Nelson A.

Various programmatic considerations have delayed the upgrading of the TREAT reactor and the performance of the control system is not yet experimentally verified. The current schedule calls for the upgrading activities to occur last in the calendar year 1987. Detailed simulation results, coupled with earlier validation of individual components of the control strategy in TREAT, verify the performance of the algorithms. The control system operates within the safety envelope provided by a protection system designed to ensure reactor safety under conditions of spurious reactivity additions. The approach should be directly applicable to MMW systems, with appropriate accounting of temperature rate limitations of key components and of the inertia of the secondary system components.

Lunar Module ECS (Environmental Control System) - Design Considerations and Failure Modes. Part 1

NASA Technical Reports Server (NTRS)

Interbartolo, Michael

2009-01-01

Design considerations and failure modes for the Lunar Module (LM) Environmental Control System (ECS) are described. An overview of the the oxygen supply and cabin pressurization, atmosphere revitalization, water management and heat transport systems are provided. Design considerations including reliability, flight instrumentation, modularization and the change to the use of batteries instead of fuel cells are discussed. A summary is provided for the LM ECS general testing regime.

Space Tethers: Design Criteria

NASA Technical Reports Server (NTRS)

Tomlin, D. D.; Faile, G. C.; Hayashida, K. B.; Frost, C. L.; Wagner, C. Y.; Mitchell, M. L.; Vaughn, J. A.; Galuska, M. J.

1997-01-01

This document is prepared to provide a systematic process for the selection of tethers for space applications. Criteria arc provided for determining the strength requirement for tether missions and for mission success from tether severing due to micrometeoroids and orbital debris particle impacts. Background information of materials for use in space tethers is provided, including electricity-conducting tethers. Dynamic considerations for tether selection is also provided. Safety, quality, and reliability considerations are provided for a tether project.

Providing for consideration of the bill (H.R. 5230) making supplemental appropriations for the fiscal year ending September 30, 2014, and for other purposes; providing for consideration of the bill (H.R. 5272) to prohibit certain actions with respect to deferred action for aliens not lawfully present in the United States, and for other purposes; and providing for consideration of motions to suspend the rules.

THOMAS, 113th Congress

Rep. Sessions, Pete [R-TX-32

2014-08-01

House - 08/01/2014 On agreeing to the resolution Agreed to by the Yeas and Nays: 218 - 191 (Roll no. 477). (All Actions) Tracker: This bill has the status Agreed to in HouseHere are the steps for Status of Legislation:

Providing for the consideration of the bill (H.R. 3372) to provide a process for ensuring the United States does not default on its obligations.

THOMAS, 113th Congress

Rep. Honda, Michael M. [D-CA-17

2014-01-14

House - 02/04/2014 Motion to Discharge Committee filed by Mr. Honda. Petition No: 113-6. (All Actions) Notes: On 2/4/2014, a motion was filed to discharge the Committee on Rules from the consideration of H.Res.459 a resolution providing for the consideration of H.R. 3372. A discharge petition requires 218 signatures for further action. (Discharge Petition No. 113-6: text with signatures.) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Providing for the consideration of the bill (H.R. 3546) to provide for the extension of certain unemployment benefits, and for other purposes.

THOMAS, 113th Congress

Rep. Schneider, Bradley Scott [D-IL-10

2014-02-25

House - 03/12/2014 Motion to Discharge Committee filed by Mr. Schneider. Petition No: 113-8. (All Actions) Notes: On 3/12/2014, a motion was filed to discharge the Committee on Rules from the consideration of H.Res.490 a resolution providing for the consideration of H.R.3546. A discharge petition requires 218 signatures for further action. (Discharge Petition No. 113-8: text with signatures.) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

The method of educational assessment affects children's neural processing and performance: behavioural and fMRI Evidence

NASA Astrophysics Data System (ADS)

Howard, Steven J.; Burianová, Hana; Calleia, Alysha; Fynes-Clinton, Samuel; Kervin, Lisa; Bokosmaty, Sahar

2017-08-01

Standardised educational assessments are now widespread, yet their development has given comparatively more consideration to what to assess than how to optimally assess students' competencies. Existing evidence from behavioural studies with children and neuroscience studies with adults suggest that the method of assessment may affect neural processing and performance, but current evidence remains limited. To investigate the impact of assessment methods on neural processing and performance in young children, we used functional magnetic resonance imaging to identify and quantify the neural correlates during performance across a range of current approaches to standardised spelling assessment. Results indicated that children's test performance declined as the cognitive load of assessment method increased. Activation of neural nodes associated with working memory further suggests that this performance decline may be a consequence of a higher cognitive load, rather than the complexity of the content. These findings provide insights into principles of assessment (re)design, to ensure assessment results are an accurate reflection of students' true levels of competency.

Thermal and economic assessment of ground-coupled storage for residential solar heat pump systems

NASA Astrophysics Data System (ADS)

Choi, M. K.; Morehouse, J. H.

1980-11-01

This study performed an analysis of ground-coupled stand-alone and series configured solar-assisted liquid-to-air heat pump systems for residences. The year-round thermal performance of these systems for space heating, space cooling, and water heating were determined by simulation and compared against non-ground-coupled solar heat pump systems as well as conventional heating and cooling systems in three geographic locations: Washington, D.C., Fort Worth, Tex., and Madison, Wis. The results indicate that without tax credits a combined solar/ground-coupled heat pump system for space heating and cooling is not cost competitive with conventional systems. Its thermal performance is considerably better than non-ground-coupled solar heat pumps in Forth Worth. Though the ground-coupled stand-alone heat pump provides 51% of the heating and cooling load with non-purchased energy in Forth Worth, its thermal performance in Washington and Madison is poor.

Comparison of ground-coupled solar-heat-pump systems to conventional systems for residential heating, cooling and water heating

NASA Astrophysics Data System (ADS)

Choi, M. K.; Morehouse, J. H.; Hughes, P. J.

1981-07-01

An analysis is performed of ground-coupled stand-alone and series configured solar-assisted liquid-to-air heat pump systems for residences. The year-round thermal performance of these systems for space heating, space cooling, and water heating is determined by simulation and compared against non-ground-coupled solar heat pump systems as well as conventional heating and cooling systems in three geographic locations: Washington, DC; Fort Worth, Texas; and Madison, Wisconsin. The results indicate that without tax credits a combined solar/ground-coupled heat pump system for space heating and cooling is not cost competitive with conventional systems. Its thermal performance is considerably better than non-ground-coupled solar heat pumps in Fort Worth. Though the ground-coupled stand-alone heat pump provides 51 percent of the heating and cooling load with non-purchased energy in Fort Worth, its thermal performance in Washington and Madison is poor.

[Long-term oxygen therapy (LTOT)--what should physicians, homecare-providers and health insurance companies know?].

PubMed

Koehler, U; Hildebrandt, O; Jerrentrup, L; Koehler, K-I; Kianinejad, P; Sohrabi, K; Schäfer, H; Kenn, K

2014-03-01

Long-term oxygen treatment (LTOT) has been demonstrated to improve prognosis in patients with chronic respiratory insufficiency. In terms of pathogenesis, improved oxygenation, reduction of pulmonary artery pressure as well as reduction of respiratory work are important. Since there are considerable differences between the LTOT systems, individually tailored therapy is needed. In particular, the mobility aspects of the patients must be taken into consideration. It is important to distinguish between stationary/mobile devices with a liquid oxygen system and stationary/mobile devices with oxygen concentrator. Oxygen titration should be performed in relation to rest and activity phases (e. g. 6 minute walk test) as well as in relation to the sleep phase. Employing devices with demand-controlled valves should be critically examined. This can be undertaken only under physician orders and requires continuous monitoring. © Georg Thieme Verlag KG Stuttgart · New York.

Concurrent application of TMS and near-infrared optical imaging: methodological considerations and potential artifacts

PubMed Central

Parks, Nathan A.

2013-01-01

The simultaneous application of transcranial magnetic stimulation (TMS) with non-invasive neuroimaging provides a powerful method for investigating functional connectivity in the human brain and the causal relationships between areas in distributed brain networks. TMS has been combined with numerous neuroimaging techniques including, electroencephalography (EEG), functional magnetic resonance imaging (fMRI), and positron emission tomography (PET). Recent work has also demonstrated the feasibility and utility of combining TMS with non-invasive near-infrared optical imaging techniques, functional near-infrared spectroscopy (fNIRS) and the event-related optical signal (EROS). Simultaneous TMS and optical imaging affords a number of advantages over other neuroimaging methods but also involves a unique set of methodological challenges and considerations. This paper describes the methodology of concurrently performing optical imaging during the administration of TMS, focusing on experimental design, potential artifacts, and approaches to controlling for these artifacts. PMID:24065911

A Cryogenic Infrared Calibration Target

NASA Technical Reports Server (NTRS)

Wollack, E. J.; Kinzer, R. E., Jr.; Rinehart, S. A.

2014-01-01

A compact cryogenic calibration target is presented that has a peak diffuse reflectance, R < or = 0.003, from 800 to 4800/cm (12 - 2 microns ). Upon expanding the spectral range under consideration to 400-10,000/ cm-1 (25 - 1 microns) the observed performance gracefully degrades to R < or = 0.02 at the band edges. In the implementation described, a high-thermal-conductivity metallic substrate is textured with a pyramidal tiling and subsequently coated with a thin lossy dielectric coating that enables high absorption and thermal uniformity across the target. The resulting target assembly is lightweight, has a low-geometric profile, and has survived repeated thermal cycling from room temperature to approx.4 K. Basic design considerations, governing equations, and test data for realizing the structure described are provided. The optical properties of selected absorptive materials-Acktar Fractal Black, Aeroglaze Z306, and Stycast 2850 FT epoxy loaded with stainless steel powder-are characterized and presented

Comprehensive and Quantitative Proteomic Analysis of Metamorphosis-Related Proteins in the Veined Rapa Whelk, Rapana venosa.

PubMed

Song, Hao; Wang, Hai-Yan; Zhang, Tao

2016-06-15

Larval metamorphosis of the veined rapa whelk (Rapana venosa) is a pelagic to benthic transition that involves considerable structural and physiological changes. Because metamorphosis plays a pivotal role in R. venosa commercial breeding and natural populations, the endogenous proteins that drive this transition attract considerable interest. This study is the first to perform a comprehensive and quantitative proteomic analysis related to metamorphosis in a marine gastropod. We analyzed the proteomes of competent R. venosa larvae and post-larvae, resulting in the identification of 5312 proteins, including 470 that were downregulated and 668 that were upregulated after metamorphosis. The differentially expressed proteins reflected multiple processes involved in metamorphosis, including cytoskeleton and cell adhesion, ingestion and digestion, stress response and immunity, as well as specific tissue development. Our data improve understanding of the physiological traits controlling R. venosa metamorphosis and provide a solid basis for further study.

Extravehicular activity welding experiment

NASA Technical Reports Server (NTRS)

Watson, J. Kevin

1989-01-01

The In-Space Technology Experiments Program (INSTEP) provides an opportunity to explore the many critical questions which can only be answered by experimentation in space. The objective of the Extravehicular Activity Welding Experiment definition project was to define the requirements for a spaceflight experiment to evaluate the feasibility of performing manual welding tasks during EVA. Consideration was given to experiment design, work station design, welding hardware design, payload integration requirements, and human factors (including safety). The results of this effort are presented. Included are the specific objectives of the flight test, details of the tasks which will generate the required data, and a description of the equipment which will be needed to support the tasks. Work station requirements are addressed as are human factors, STS integration procedures and, most importantly, safety considerations. A preliminary estimate of the cost and the schedule for completion of the experiment through flight and postflight analysis are given.

The calculated effect of trailing-edge flaps on the take-off of flying boats

NASA Technical Reports Server (NTRS)

Parkinson, J E; Bell, J W

1934-01-01

The results of take-off calculations are given for an application of simple trailing-edge flaps to two hypothetical flying boats, one having medium wing and power loading and consequently considerable excess of thrust over total resistance during the take-off run, the other having high wing and power loading and a very low excess thrust. For these seaplanes the effect of downward flap settings was: (1) to increase the total resistance below the stalling speed, (2) to decrease the get-away speed, (3) to improve the take-off performance of the seaplane having considerable excess thrust, and (4) to hinder the take-off of the seaplane having low excess thrust. It is indicated that flaps would allow a decrease in the high angles of wing setting necessary with most seaplanes, provided that the excess thrust is not too low.

Corrective lens use and refractive error among United States Air Force aircrew.

PubMed

Wright, Steve T; Ivan, Douglas J; Clark, Patrick J; Gooch, John M; Thompson, William

2010-03-01

Corrective lens use by military aviators is an important consideration in the design of head-mounted equipment. The United States Air Force (USAF) has periodically monitored lens use by aviators; however, it has been over a decade since the last study. We provide an update on the prevalence of corrective lenses and refractive error among USAF aircrew based on eyeglass orders processed through the Spectacle Request Transmission System (SRTS). Currently, 41% of active duty USAF pilots and 54% of other aircrew require corrective lenses to perform flight duties. Refractive errors are characterized by low to moderate levels of myopia with a mean spherical equivalent power of -1.01 diopters (D) for pilots and -1.68 D for others. Contact lenses, and more recently refractive surgery, reduce the number of aircrew that must rely on spectacles when flying; however, spectacle compatibility remains an important consideration in the cockpit.

A cryogenic infrared calibration target

NASA Astrophysics Data System (ADS)

Wollack, E. J.; Kinzer, R. E.; Rinehart, S. A.

2014-04-01

A compact cryogenic calibration target is presented that has a peak diffuse reflectance, R ⩽ 0.003, from 800 to 4800 cm-1 (12 - 2 μm). Upon expanding the spectral range under consideration to 400-10 000 cm-1 (25 - 1 μm) the observed performance gracefully degrades to R ⩽ 0.02 at the band edges. In the implementation described, a high-thermal-conductivity metallic substrate is textured with a pyramidal tiling and subsequently coated with a thin lossy dielectric coating that enables high absorption and thermal uniformity across the target. The resulting target assembly is lightweight, has a low-geometric profile, and has survived repeated thermal cycling from room temperature to ˜4 K. Basic design considerations, governing equations, and test data for realizing the structure described are provided. The optical properties of selected absorptive materials—Acktar Fractal Black, Aeroglaze Z306, and Stycast 2850 FT epoxy loaded with stainless steel powder—are characterized and presented.

The psychosocial development of world-class athletes: Additional considerations for understanding the whole person and salience of adversity.

PubMed

Gucciardi, Daniel F

2017-01-01

In the target article, Hardy and colleagues provided an incisive analysis of retrospectively reported psychosocial factors associated with the development and careers of 32 former athletes from Olympic sports. They found that Super-Elite athletes ("serial" medal winners at major international championships, i.e., World Championship or Olympic Games) differed from matched Elite performers (won medals at international competitions but not major championships) with regard to several important psychosocial factors (e.g., negative life events, turning point, relative importance of sport). In this commentary, I critique and extend upon these key findings to delineate additional considerations for understanding the whole person (i.e., traits, characteristic adaptations, narrative identity) and salience of adversity (i.e., timing, frequency, and duration) with the goal to stimulate future research and theory on the psychosocial development of Olympic champions. © 2017 Elsevier B.V. All rights reserved.

Health economics in clinical research.

PubMed

Manns, Braden J

2015-01-01

The pressure for health care systems to provide more resource intensive health care and newer, more costly, therapies is significant, despite limited health care budgets. As such, demonstration that a new therapy is effective is no longer sufficient to ensure that it is funded within publicly funded health care systems. The impact of a therapy on health care costs is also an important consideration for decision-makers who must allocate scarce resources. The clinical benefits and costs of a new therapy can be estimated simultaneously using economic evaluation, the strengths and limitations of which are discussed herein. In addition, this chapter includes discussion of the important economic outcomes that can be collected within a clinical trial (alongside the clinical outcome data) enabling consideration of the impact of the therapy on overall resource use, thus enabling performance of an economic evaluation, if the therapy is shown to be effective.

Estimating verbal fluency and naming ability from the test of premorbid functioning and demographic variables: Regression equations derived from a regional UK sample.

PubMed

Jenkinson, Toni-Marie; Muncer, Steven; Wheeler, Miranda; Brechin, Don; Evans, Stephen

2018-06-01

Neuropsychological assessment requires accurate estimation of an individual's premorbid cognitive abilities. Oral word reading tests, such as the test of premorbid functioning (TOPF), and demographic variables, such as age, sex, and level of education, provide a reasonable indication of premorbid intelligence, but their ability to predict other related cognitive abilities is less well understood. This study aimed to develop regression equations, based on the TOPF and demographic variables, to predict scores on tests of verbal fluency and naming ability. A sample of 119 healthy adults provided demographic information and were tested using the TOPF, FAS, animal naming test (ANT), and graded naming test (GNT). Multiple regression analyses, using the TOPF and demographics as predictor variables, were used to estimate verbal fluency and naming ability test scores. Change scores and cases of significant impairment were calculated for two clinical samples with diagnosed neurological conditions (TBI and meningioma) using the method in Knight, McMahon, Green, and Skeaff (). Demographic variables provided a significant contribution to the prediction of all verbal fluency and naming ability test scores; however, adding TOPF score to the equation considerably improved prediction beyond that afforded by demographic variables alone. The percentage of variance accounted for by demographic variables and/or TOPF score varied from 19 per cent (FAS), 28 per cent (ANT), and 41 per cent (GNT). Change scores revealed significant differences in performance in the clinical groups, particularity the TBI group. Demographic variables, particularly education level, and scores on the TOPF should be taken into consideration when interpreting performance on tests of verbal fluency and naming ability. © 2017 The British Psychological Society.

Considerations for conducting qualitative research with pediatric patients for the purpose of PRO development.

PubMed

Patel, Zabin S; Jensen, Sally E; Lai, Jin-Shei

2016-09-01

To provide an overview of methodological considerations when conducting qualitative research with pediatric patients for the purpose of patient-reported outcome measure development A literature review of qualitative methods in pediatric measure development was completed. Eight clinicians providing care to pediatric patients were interviewed for their expert input. Thematic analysis of the literature and clinician interviews was used to identify themes for consideration. Findings from the literature and expert interviews emphasized the way in which cognitive, linguistic, and social developmental factors affect pediatric patients' understanding of their condition and ability to communicate about their experiences in an interview. There was consensus among the experts that traditional semi-structured interviews with children younger than eight lack characteristics necessary to yield meaningful information about condition and symptom report because they may fail to capture children's understanding and awareness of their condition and may limit their ability to express themselves comfortably. Our findings include recommended strategies to optimize data collected in qualitative interviews with pediatric patients, including modifications to the interview process to establish rapport, construction of interview questions to ensure they are developmentally appropriate, and the use of supplementary techniques to facilitate communication. When employing qualitative methods in pediatric measure development, interview guides, methods, and length require careful tailoring to ensure the child's perspectives are captured. This may be best achieved through research performed with narrow age bands that employs flexibility in methods to allow children a comfortable way in which to communicate about their experiences.

Data splitting for artificial neural networks using SOM-based stratified sampling.

PubMed

May, R J; Maier, H R; Dandy, G C

2010-03-01

Data splitting is an important consideration during artificial neural network (ANN) development where hold-out cross-validation is commonly employed to ensure generalization. Even for a moderate sample size, the sampling methodology used for data splitting can have a significant effect on the quality of the subsets used for training, testing and validating an ANN. Poor data splitting can result in inaccurate and highly variable model performance; however, the choice of sampling methodology is rarely given due consideration by ANN modellers. Increased confidence in the sampling is of paramount importance, since the hold-out sampling is generally performed only once during ANN development. This paper considers the variability in the quality of subsets that are obtained using different data splitting approaches. A novel approach to stratified sampling, based on Neyman sampling of the self-organizing map (SOM), is developed, with several guidelines identified for setting the SOM size and sample allocation in order to minimize the bias and variance in the datasets. Using an example ANN function approximation task, the SOM-based approach is evaluated in comparison to random sampling, DUPLEX, systematic stratified sampling, and trial-and-error sampling to minimize the statistical differences between data sets. Of these approaches, DUPLEX is found to provide benchmark performance with good model performance, with no variability. The results show that the SOM-based approach also reliably generates high-quality samples and can therefore be used with greater confidence than other approaches, especially in the case of non-uniform datasets, with the benefit of scalability to perform data splitting on large datasets. Copyright 2009 Elsevier Ltd. All rights reserved.

Considerations for an exercise prescription

NASA Technical Reports Server (NTRS)

Convertino, Victor A.

1989-01-01

A number of past and most recent research findings that describe some of the physiological responses to exercise in man and their relationship with exposure to various gravitational environments are discussed. Most of the data pertain to adaptations of the cardiovascular and body fluid systems. It should be kept in mind that the data from studies on microgravity simulation in man include exposures of relatively short duration (5 hours to 14 days). However, it is argued that the results may provide important guidelines for the consideration of many variables which are pertinent to the development of exercise prescription for long-duration space flight. The following considerations for exercise prescriptions during long-duration space flight are noted: (1) Relatively high aerobic fitness and strength, especially of the upper body musculature, should be a criterion for selection of astronauts who will be involved in EVA, since endurance and strength appear to be predominant characteristics for work performance. (2) Some degree of upper body strength will probably be required for effective performance of EVA. However, the endurance and strength required by the upper body for EVA can probably be obtained through preflight exercise prescription which involves swimming. (3) Although some degree of arm exercise may be required to maintain preflight endurance and strength, researchers propose that regular EVA will probably be sufficient to maintain the endurance and strength required to effectively perform work tasks during space flight. (4) A minimum of one maximal aerobic exercise every 7 to 10 days during space flight may be all that is necessary for maintenance of normal cardiovascular responsiveness and replacement of body fluids for reentry following prolonged space flight. (5) The possible reduction in the amount of exercise required for maintenance of cardiovascular system and body fluids in combination with the use of electromyostimulation (EMS) or methods other than conventional exercise for maintaining size and strength of muscles and bones needs great consideration for further research. These approaches represent a potential solution to the problem of compromising valuable time for exercise that is needed for daily operations.

Qualitative data analysis: conceptual and practical considerations.

PubMed

Liamputtong, Pranee

2009-08-01

Qualitative inquiry requires that collected data is organised in a meaningful way, and this is referred to as data analysis. Through analytic processes, researchers turn what can be voluminous data into understandable and insightful analysis. This paper sets out the different approaches that qualitative researchers can use to make sense of their data including thematic analysis, narrative analysis, discourse analysis and semiotic analysis and discusses the ways that qualitative researchers can analyse their data. I first discuss salient issues in performing qualitative data analysis, and then proceed to provide some suggestions on different methods of data analysis in qualitative research. Finally, I provide some discussion on the use of computer-assisted data analysis.

Consideration of Learning Orientations as an Application of Achievement Goals in Evaluating Life Science Majors in Introductory Physics

ERIC Educational Resources Information Center

Mason, Andrew J.; Bertram, Charles A.

2018-01-01

When considering performing an Introductory Physics for Life Sciences course transformation for one's own institution, life science majors' achievement goals are a necessary consideration to ensure the pedagogical transformation will be effective. However, achievement goals are rarely an explicit consideration in physics education research topics…

Considerations for Multiprocessor Topologies

NASA Technical Reports Server (NTRS)

Byrd, Gregory T.; Delagi, Bruce A.

1987-01-01

Choosing a multiprocessor interconnection topology may depend on high-level considerations, such as the intended application domain and the expected number of processors. It certainly depends on low-level implementation details, such as packaging and communications protocols. The authors first use rough measures of cost and performance to characterize several topologies. They then examine how implementation details can affect the realizable performance of a topology.

Leading School-Wide Improvement in Low-Performing Schools Facing Conditions of Accountability: Key Actions and Considerations

ERIC Educational Resources Information Center

Cosner, Shelby; Jones, Mary F.

2016-01-01

Purpose: The purpose of this paper is to advance a framework that identifies three key domains of work and a set of more nuanced considerations and actions within each domain for school leaders seeking to improve school-wide student learning in low-performing schools facing conditions of accountability. Design/methodology/approach: Review of…

Enhanced performance of flexible dye-sensitized solar cells using flexible Ag@ZrO2/C nanofiber film as low-cost counter electrode

NASA Astrophysics Data System (ADS)

Yin, Xin; Xie, Xueyao; Song, Lixin; Zhai, Jifeng; Du, Pingfan; Xiong, Jie

2018-05-01

Highly flexible ZrO2/C nanofibers (NFs) coated with Ag nanoparticles (NPs) have been fabricated by a combination of electrospinning, carbonization and hydrothermal treatment. The obtained Ag@ZrO2/C NFs serve as low-cost counter electrodes (CEs) for flexible dye-sensitized solar cells (FDSSCs). A considerable power conversion efficiency of 4.77% is achieved, which is 27.9% higher than the η of ZrO2/C NFs CEs (3.73%) and reaches about 90% of that of Pt CE (5.26%). It can be ascribed to the fact that the introduction of Ag NPs provides a large number of accessible reaction sites for electrolyte ions to rapidly participate in the I3-/I- reaction. Moreover, the Ag NPs can produce synergistic effect with ZrO2/C NFs to further enhance transport capacity and electro-catalytic activity of the Ag@ZrO2/C film. Therefore, the considerable performance together with characteristics of simple preparation, low cost and flexibility suggests the Ag@ZrO2/C film can be promising candidate for the future generation of FDSSC.

Dynamic Task Allocation in Multi-Hop Multimedia Wireless Sensor Networks with Low Mobility

PubMed Central

Jin, Yichao; Vural, Serdar; Gluhak, Alexander; Moessner, Klaus

2013-01-01

This paper presents a task allocation-oriented framework to enable efficient in-network processing and cost-effective multi-hop resource sharing for dynamic multi-hop multimedia wireless sensor networks with low node mobility, e.g., pedestrian speeds. The proposed system incorporates a fast task reallocation algorithm to quickly recover from possible network service disruptions, such as node or link failures. An evolutional self-learning mechanism based on a genetic algorithm continuously adapts the system parameters in order to meet the desired application delay requirements, while also achieving a sufficiently long network lifetime. Since the algorithm runtime incurs considerable time delay while updating task assignments, we introduce an adaptive window size to limit the delay periods and ensure an up-to-date solution based on node mobility patterns and device processing capabilities. To the best of our knowledge, this is the first study that yields multi-objective task allocation in a mobile multi-hop wireless environment under dynamic conditions. Simulations are performed in various settings, and the results show considerable performance improvement in extending network lifetime compared to heuristic mechanisms. Furthermore, the proposed framework provides noticeable reduction in the frequency of missing application deadlines. PMID:24135992

US DOE-EM On-Site Disposal Cell Working Group - Fostering Communication On Performance Assessment Challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seitz, Roger R.; Suttora, Linda C.; Phifer, Mark

On-site disposal cells are in use and being considered at several U.S. Department of Energy (USDOE) sites as the final disposition for large amounts of waste associated with cleanup of contaminated areas and facilities. These facilities are typically developed with regulatory oversight from States and/or the US Environmental Protection Agency (USEPA) in addition to USDOE. The facilities are developed to meet design standards for disposal of hazardous waste as well as the USDOE performance based standards for disposal of radioactive waste. The involvement of multiple and different regulators for facilities across separate sites has resulted in some differences in expectationsmore » for performance assessments and risk assessments (PA/RA) that are developed for the disposal facilities. The USDOE-EM Office of Site Restoration formed a working group to foster improved communication and sharing of information for personnel associated with these Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) disposal cells and work towards more consistent assumptions, as appropriate, for technical and policy considerations related to performance and risk assessments in support of a Record of Decision and Disposal Authorization Statement. The working group holds teleconferences, as needed, focusing on specific topics of interest. The topics addressed to date include an assessment of the assumptions used for performance assessments and risk assessments (PA/RAs) for on-site disposal cells, requirements and assumptions related to assessment of inadvertent intrusion, DOE Manual 435.1-1 requirements, and approaches for consideration of the long-term performance of liners and covers in the context of PAs. The working group has improved communication among the staff and oversight personnel responsible for onsite disposal cells and has provided a forum to identify and resolve common concerns.« less

STORMWATER BEST MANAGEMENT PRACTICES DESIGN GUIDE VOLUME 1 - GENERAL CONSIDERATIONS

EPA Science Inventory

This document is Volume 1 of a three volume series that provides guidance on the selection and design of stormwater management Best Management Practices (BMPs). This first volume provides general considerations associated with the selection and design of BMPs.
Volume I provi...

Digested sludge-derived three-dimensional hierarchical porous carbon for high-performance supercapacitor electrode.

PubMed

Zhang, Jia-Jia; Fan, Hao-Xiang; Dai, Xiao-Hu; Yuan, Shi-Jie

2018-04-01

Digested sludge, as the main by-product of the sewage sludge anaerobic digestion process, still contains considerable organic compounds. In this protocol, we report a facile method for preparing digested sludge-derived self-doped porous carbon material for high-performance supercapacitor electrodes via a sustainable pyrolysis/activation process. The obtained digested sludge-derived carbon material (HPDSC) exhibits versatile O-, N-doped hierarchical porous framework, high specific surface area (2103.6 m 2  g -1 ) and partial graphitization phase, which can facilitate ion transport, provide more storage sites for electrolyte ions and enhance the conductivity of active electrode materials. The HPDSC-based supercapacitor electrodes show favourable energy storage performance, with a specific capacitance of 245 F g -1 at 1.0 A g -1 in 0.5 M Na 2 SO 4 ; outstanding cycling stability, with 98.4% capacitance retention after 2000 cycles; and good rate performance (211 F g -1 at 11 A g -1 ). This work provides a unique self-doped three-dimensional hierarchical porous carbon material with a favourable charge storage capacity and at the same time finds a high value-added and environment-friendly strategy for disposal and recycling of digested sludge.

Digested sludge-derived three-dimensional hierarchical porous carbon for high-performance supercapacitor electrode

NASA Astrophysics Data System (ADS)

Zhang, Jia-Jia; Fan, Hao-Xiang; Dai, Xiao-Hu; Yuan, Shi-Jie

2018-04-01

Digested sludge, as the main by-product of the sewage sludge anaerobic digestion process, still contains considerable organic compounds. In this protocol, we report a facile method for preparing digested sludge-derived self-doped porous carbon material for high-performance supercapacitor electrodes via a sustainable pyrolysis/activation process. The obtained digested sludge-derived carbon material (HPDSC) exhibits versatile O-, N-doped hierarchical porous framework, high specific surface area (2103.6 m2 g-1) and partial graphitization phase, which can facilitate ion transport, provide more storage sites for electrolyte ions and enhance the conductivity of active electrode materials. The HPDSC-based supercapacitor electrodes show favourable energy storage performance, with a specific capacitance of 245 F g-1 at 1.0 A g-1 in 0.5 M Na2SO4; outstanding cycling stability, with 98.4% capacitance retention after 2000 cycles; and good rate performance (211 F g-1 at 11 A g-1). This work provides a unique self-doped three-dimensional hierarchical porous carbon material with a favourable charge storage capacity and at the same time finds a high value-added and environment-friendly strategy for disposal and recycling of digested sludge.

Taguchi optimization of bismuth-telluride based thermoelectric cooler

NASA Astrophysics Data System (ADS)

Anant Kishore, Ravi; Kumar, Prashant; Sanghadasa, Mohan; Priya, Shashank

2017-07-01

In the last few decades, considerable effort has been made to enhance the figure-of-merit (ZT) of thermoelectric (TE) materials. However, the performance of commercial TE devices still remains low due to the fact that the module figure-of-merit not only depends on the material ZT, but also on the operating conditions and configuration of TE modules. This study takes into account comprehensive set of parameters to conduct the numerical performance analysis of the thermoelectric cooler (TEC) using a Taguchi optimization method. The Taguchi method is a statistical tool that predicts the optimal performance with a far less number of experimental runs than the conventional experimental techniques. Taguchi results are also compared with the optimized parameters obtained by a full factorial optimization method, which reveals that the Taguchi method provides optimum or near-optimum TEC configuration using only 25 experiments against 3125 experiments needed by the conventional optimization method. This study also shows that the environmental factors such as ambient temperature and cooling coefficient do not significantly affect the optimum geometry and optimum operating temperature of TECs. The optimum TEC configuration for simultaneous optimization of cooling capacity and coefficient of performance is also provided.

The performance of cable braids and terminations to lightning induced transients

NASA Technical Reports Server (NTRS)

Crofts, David

1991-01-01

The latest specification detailing the test waveforms for indirect lightning transients as applied to aircraft wiring systems specify very high voltages and currents. Although considerable data exists for measuring cable screen leakage using such methods as surface transfer impedance and bulk cable injection, there is little data on the likely core transient level that is likely to be induced from these threats. In particular, the new Waveform 5 at very high current levels (10 kA) is reputed to cause severe cable damage. A range of representative cables were made with various screen termination techniques and screening levels. These were tested first to determine their relative screening performance and then they were subjected to lightning transient testing to all the specified waveforms. Core voltages were measured for each test. Tests were also performed on bundles with fewer wires to determine the failure criteria with Waveform 5 and these tests also include flat conductor cables. The test showed that correctly terminated cable bundles performed well in all the tests and would provide a high level of protection to the electronic systems. The use of overbraides, provided the individual screens are well terminated, appears to be unnecessary.

Quantitative Guidance for Stove Usage and Performance to Achieve Health and Environmental Targets.

PubMed

Johnson, Michael A; Chiang, Ranyee A

2015-08-01

Displacing the use of polluting and inefficient cookstoves in developing countries is necessary to achieve the potential health and environmental benefits sought through clean cooking solutions. Yet little quantitative context has been provided on how much displacement of traditional technologies is needed to achieve targets for household air pollutant concentrations or fuel savings. This paper provides instructive guidance on the usage of cooking technologies required to achieve health and environmental improvements. We evaluated different scenarios of displacement of traditional stoves with use of higher performing technologies. The air quality and fuel consumption impacts were estimated for these scenarios using a single-zone box model of indoor air quality and ratios of thermal efficiency. Stove performance and usage should be considered together, as lower performing stoves can result in similar or greater benefits than a higher performing stove if the lower performing stove has considerably higher displacement of the baseline stove. Based on the indoor air quality model, there are multiple performance-usage scenarios for achieving modest indoor air quality improvements. To meet World Health Organization guidance levels, however, three-stone fire and basic charcoal stove usage must be nearly eliminated to achieve the particulate matter target (< 1-3 hr/week), and substantially limited to meet the carbon monoxide guideline (< 7-9 hr/week). Moderate health gains may be achieved with various performance-usage scenarios. The greatest benefits are estimated to be achieved by near-complete displacement of traditional stoves with clean technologies, emphasizing the need to shift in the long term to near exclusive use of clean fuels and stoves. The performance-usage scenarios are also provided as a tool to guide technology selection and prioritize behavior change opportunities to maximize impact.

Battelle Energy Alliance, LLC (BEA) 2016 Self-Assessment Report for Idaho National Laboratory (INL)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alvarez, Juan

This report provides Battelle Energy Alliance’s (BEA) self-assessment of performance for the period of October 1, 2015, through September 30, 2016, as evaluated against the goals, performance objectives, and notable outcomes defined in the Fiscal Year (FY) 2016 Performance Evaluation and Measurement Plan (PEMP). BEA took into consideration and consolidated all input provided from internal and external sources (e.g., Contractor Assurance System [CAS], program and customer feedback, external and independent reviews, and Department of Energy [DOE] Idaho Operations Office [ID] quarterly PEMP reports and Quarterly Evaluation Reports). The overall performance of BEA during this rating period was self-assessed as “Excellent,”more » exceeding expectations of performance in Goal 1.0, “Efficient and Effective Mission Accomplishment”; Goal 2.0, “Efficient and Effective Stewardship and Operation of Research Facilities”; and Goal 3.0, “Sound and Competent Leadership and Stewardship of the Laboratory.” BEA met or exceeded expectations for Mission Support Goals 4.0 through 7.0 assessing a final multiplier of 1.0. Table 1 documents BEA’s assessment of performance to the goals and individual performance objectives. Table 2 documents completion of the notable outcomes. A more-detailed assessment of performance for each individual performance objective is documented in the closeout reports (see the PEMP reporting system). Table 3 includes an update to “Performance Challenges” as reported in the FY 2015 Self-Assessment Report.« less

Performance of the 0.3-meter transonic cryogenic tunnel with air, nitrogen, and sulfur hexafluoride media under closed loop automatic control

NASA Technical Reports Server (NTRS)

Balakrishna, S.; Kilgore, W. Allen

1995-01-01

The NASA Langley 0.3-m Transonic Cryogenic Tunnel was modified in 1994, to operate with any one of the three test gas media viz., air, cryogenic nitrogen gas, or sulfur hexafluoride gas. This document provides the initial test results with respect to the tunnel performance and tunnel control, as a part of the commissioning activities on the microcomputer based controller. The tunnel can provide precise and stable control of temperature to less than or equal to +/- 0.3 K in the range 80-320 K in cyro mode or 300-320 K in air/SF6 mode, pressure to +/- 0.01 psia in the range 15-88 psia and Mach number to +/- O.0015 in the range 0.150 to transonic Mach numbers up to 1.000. A new heat exchanger has been included in the tunnel circuit and is performing adequately. The tunnel airfoil testing benefits considerably by precise control of tunnel states and helps in generating high quality aerodynamic test data from the 0.3-m TCT.

Chalcogenide fiber-optic SPR chemical sensor with MoS2 monolayer, polymer clad, and polythiophene layer in NIR using selective ray launching

NASA Astrophysics Data System (ADS)

Sharma, Anuj K.; Kaur, Baljinder

2018-07-01

Surface plasmon resonance (SPR) based chalcogenide fiber-optic sensor with polymer clad and MoS2 monolayer is simulated and analyzed in near infrared (NIR) for detection of mixture of alcohols (ethanol and methanol) dissolved in water solution. The proposed fiber optic sensor is analyzed under angular interrogation method, which is based on selective ray (on-axis) launching of monochromatic light into the fiber core at varying angle followed by measuring the loss of power (in dB) after passing through the SPR probe region. The performance of the sensor is analyzed in terms of its figure of merit (FOM). The sensor's specificity towards alcohols along with considerably larger FOM is achieved by utilizing a polythiophene (PT) layer. The results indicate that longer NIR wavelength (λ) provides superior sensing performance. The sensor's performance is better for larger volume fraction of methanol in the water solution. The proposed fiber optic SPR sensor has the capability of providing much greater FOM compared with the previously-reported SPR sensors.

Determining Functional Reliability of Pyrotechnic Mechanical Devices

NASA Technical Reports Server (NTRS)

Bement, Laurence J.; Multhaup, Herbert A.

1997-01-01

This paper describes a new approach for evaluating mechanical performance and predicting the mechanical functional reliability of pyrotechnic devices. Not included are other possible failure modes, such as the initiation of the pyrotechnic energy source. The requirement of hundreds or thousands of consecutive, successful tests on identical components for reliability predictions, using the generally accepted go/no-go statistical approach routinely ignores physics of failure. The approach described in this paper begins with measuring, understanding and controlling mechanical performance variables. Then, the energy required to accomplish the function is compared to that delivered by the pyrotechnic energy source to determine mechanical functional margin. Finally, the data collected in establishing functional margin is analyzed to predict mechanical functional reliability, using small-sample statistics. A careful application of this approach can provide considerable cost improvements and understanding over that of go/no-go statistics. Performance and the effects of variables can be defined, and reliability predictions can be made by evaluating 20 or fewer units. The application of this approach to a pin puller used on a successful NASA mission is provided as an example.

Evaluation of the performance of 3D virtual screening protocols: RMSD comparisons, enrichment assessments, and decoy selection--what can we learn from earlier mistakes?

PubMed

Kirchmair, Johannes; Markt, Patrick; Distinto, Simona; Wolber, Gerhard; Langer, Thierry

2008-01-01

Within the last few years a considerable amount of evaluative studies has been published that investigate the performance of 3D virtual screening approaches. Thereby, in particular assessments of protein-ligand docking are facing remarkable interest in the scientific community. However, comparing virtual screening approaches is a non-trivial task. Several publications, especially in the field of molecular docking, suffer from shortcomings that are likely to affect the significance of the results considerably. These quality issues often arise from poor study design, biasing, by using improper or inexpressive enrichment descriptors, and from errors in interpretation of the data output. In this review we analyze recent literature evaluating 3D virtual screening methods, with focus on molecular docking. We highlight problematic issues and provide guidelines on how to improve the quality of computational studies. Since 3D virtual screening protocols are in general assessed by their ability to discriminate between active and inactive compounds, we summarize the impact of the composition and preparation of test sets on the outcome of evaluations. Moreover, we investigate the significance of both classic enrichment parameters and advanced descriptors for the performance of 3D virtual screening methods. Furthermore, we review the significance and suitability of RMSD as a measure for the accuracy of protein-ligand docking algorithms and of conformational space sub sampling algorithms.

Systems evaluation of thermal bus concepts

NASA Technical Reports Server (NTRS)

Stalmach, D. D.

1982-01-01

Thermal bus concepts, to provide a centralized thermal utility for large, multihundred kilowatt space platforms, were studied and the results are summarized. Concepts were generated, defined, and screened for inclusion in system level thermal bus trades. Parametric trade studies were conducted in order to define the operational envelope, performance, and physical characteristics of each. Two concepts were selected as offering the most promise for thermal bus development. All of four concepts involved two phase flow in order to meet the required isothermal nature of the thermal bus. Two of the concepts employ a mechanical means to circulate the working fluid, a liquid pump in one case and a vapor compressor in another. Another concept utilizes direct osmosis as the driving force of the thermal bus. The fourth concept was a high capacity monogroove heat pipe. After preliminary sizing and screening, three of these concepts were selected to carry into the trade studies. The monogroove heat pipe concept was deemed unsuitable for further consideration because of its heat transport limitations. One additional concept utilizing capillary forces to drive the working fluid was added. Parametric system level trade studies were performed. Sizing and weight calculations were performed for thermal bus sizes ranging from 5 to 350 kW and operating temperatures in the range of 4 to 120 C. System level considerations such as heat rejection and electrical power penalties and interface temperature losses were included in the weight calculations.

Local and System Level Considerations for Plasma-Based Techniques in Hypersonic Flight

NASA Astrophysics Data System (ADS)

Suchomel, Charles; Gaitonde, Datta

2007-01-01

The harsh environment encountered due to hypersonic flight, particularly when air-breathing propulsion devices are utilized, poses daunting challenges to successful maturation of suitable technologies. This has spurred the quest for revolutionary solutions, particularly those exploiting the fact that air under these conditions can become electrically conducting either naturally or through artificial enhancement. Optimized development of such concepts must emphasize not only the detailed physics by which the fluid interacts with the imposed electromagnetic fields, but must also simultaneously identify system level issues integration and efficiencies that provide the greatest leverage. This paper presents some recent advances at both levels. At the system level, an analysis is summarized that incorporates the interdependencies occurring between weight, power and flow field performance improvements. Cruise performance comparisons highlight how one drag reduction device interacts with the vehicle to improve range. Quantified parameter interactions allow specification of system requirements and energy consuming technologies that affect overall flight vehicle performance. Results based on on the fundamental physics are presented by distilling numerous computational studies into a few guiding principles. These highlight the complex non-intuitive relationships between the various fluid and electromagnetic fields, together with thermodynamic considerations. Generally, energy extraction is an efficient process, while the reverse is accompanied by significant dissipative heating and inefficiency. Velocity distortions can be detrimental to plasma operation, but can be exploited to tailor flows through innovative electromagnetic configurations.

Structural materials for Gen-IV nuclear reactors: Challenges and opportunities

NASA Astrophysics Data System (ADS)

Murty, K. L.; Charit, I.

2008-12-01

Generation-IV reactor design concepts envisioned thus far cater toward a common goal of providing safer, longer lasting, proliferation-resistant and economically viable nuclear power plants. The foremost consideration in the successful development and deployment of Gen-IV reactor systems is the performance and reliability issues involving structural materials for both in-core and out-of-core applications. The structural materials need to endure much higher temperatures, higher neutron doses and extremely corrosive environment, which are beyond the experience of the current nuclear power plants. Materials under active consideration for use in different reactor components include various ferritic/martensitic steels, austenitic stainless steels, nickel-base superalloys, ceramics, composites, etc. This paper presents a summary of various Gen-IV reactor concepts, with emphasis on the structural materials issues depending on the specific application areas. This paper also discusses the challenges involved in using the existing materials under both service and off-normal conditions. Tasks become increasingly complex due to the operation of various fundamental phenomena like radiation-induced segregation, radiation-enhanced diffusion, precipitation, interactions between impurity elements and radiation-produced defects, swelling, helium generation and so forth. Further, high temperature capability (e.g. creep properties) of these materials is a critical, performance-limiting factor. It is demonstrated that novel alloy and microstructural design approaches coupled with new materials processing and fabrication techniques may mitigate the challenges, and the optimum system performance may be achieved under much demanding conditions.

Impact of uniform electrode current distribution on ETF. [Engineering Test Facility MHD generator

NASA Technical Reports Server (NTRS)

Bents, D. J.

1982-01-01

A basic reason for the complexity and sheer volume of electrode consolidation hardware in the MHD ETF Powertrain system is the channel electrode current distribution, which is non-uniform. If the channel design is altered to provide uniform electrode current distribution, the amount of hardware required decreases considerably, but at the possible expense of degraded channel performance. This paper explains the design impacts on the ETF electrode consolidation network associated with uniform channel electrode current distribution, and presents the alternate consolidation designs which occur. They are compared to the baseline (non-uniform current) design with respect to performance, and hardware requirements. A rational basis is presented for comparing the requirements for the different designs and the savings that result from uniform current distribution. Performance and cost impacts upon the combined cycle plant are discussed.

Mobile Robot and Mobile Manipulator Research Towards ASTM Standards Development.

PubMed

Bostelman, Roger; Hong, Tsai; Legowik, Steven

2016-01-01

Performance standards for industrial mobile robots and mobile manipulators (robot arms onboard mobile robots) have only recently begun development. Low cost and standardized measurement techniques are needed to characterize system performance, compare different systems, and to determine if recalibration is required. This paper discusses work at the National Institute of Standards and Technology (NIST) and within the ASTM Committee F45 on Driverless Automatic Guided Industrial Vehicles. This includes standards for both terminology, F45.91, and for navigation performance test methods, F45.02. The paper defines terms that are being considered. Additionally, the paper describes navigation test methods that are near ballot and docking test methods being designed for consideration within F45.02. This includes the use of low cost artifacts that can provide alternatives to using relatively expensive measurement systems.

Benchmarking reference services: an introduction.

PubMed

Marshall, J G; Buchanan, H S

1995-01-01

Benchmarking is based on the common sense idea that someone else, either inside or outside of libraries, has found a better way of doing certain things and that your own library's performance can be improved by finding out how others do things and adopting the best practices you find. Benchmarking is one of the tools used for achieving continuous improvement in Total Quality Management (TQM) programs. Although benchmarking can be done on an informal basis, TQM puts considerable emphasis on formal data collection and performance measurement. Used to its full potential, benchmarking can provide a common measuring stick to evaluate process performance. This article introduces the general concept of benchmarking, linking it whenever possible to reference services in health sciences libraries. Data collection instruments that have potential application in benchmarking studies are discussed and the need to develop common measurement tools to facilitate benchmarking is emphasized.

Computer-task testing of rhesus monkeys (Macaca mulatta) in the social milieu.

PubMed

Washburn, D A; Harper, S; Rumbaugh, D M

1994-07-01

Previous research has demonstrated that a behavior and performance testing paradigm, in which rhesus monkeys (Macaca mulatta) manipulate a joystick to respond to computer-generated stimuli, provides environmental enrichment and supports the psychological well-being of captive research animals. The present study was designed to determine whether computer-task activity would be affected by pair-housing animals that had previously been tested only in their single-animal home cages. No differences were observed in productivity or performance levels as a function of housing condition, even when the animals were required to "self-identify" prior to performing each trial. The data indicate that cognitive challenge and control are as preferred by the animals as social opportunities, and that, together with comfort/health considerations, each must be addressed for the assurance of psychological well-being.

Reasoning about beliefs: a human specialization?

PubMed

Povinelli, D J; Giambrone, S

2001-01-01

A recent meta-analysis performed by Wellman, Cross, and Watson clears the air surrounding young children's performance on tests of false belief by showing that it is highly likely that there is some type of conceptual development between 3 and 5 years of age that supports improved task performance. The data concerning the evolutionary origin of these abilities, however, is considerably less clear. Nonetheless, there is some reason to suspect that theory of mind is unique to our species, and that its original function was to provide a more abstract level of describing ancient behavioral patterns (such as deception, reconciliation, and gaze following)-behaviors that humans share in common with many other species. Thus, the initial selective advantage of theory of mind may have been because it increased the flexibility of already-existing behaviors, not because it generated scores of radically new ones.

Improving the performance of a filling line based on simulation

NASA Astrophysics Data System (ADS)

Jasiulewicz-Kaczmarek, M.; Bartkowiak, T.

2016-08-01

The paper describes the method of improving performance of a filling line based on simulation. This study concerns a production line that is located in a manufacturing centre of a FMCG company. A discrete event simulation model was built using data provided by maintenance data acquisition system. Two types of failures were identified in the system and were approximated using continuous statistical distributions. The model was validated taking into consideration line performance measures. A brief Pareto analysis of line failures was conducted to identify potential areas of improvement. Two improvements scenarios were proposed and tested via simulation. The outcome of the simulations were the bases of financial analysis. NPV and ROI values were calculated taking into account depreciation, profits, losses, current CIT rate and inflation. A validated simulation model can be a useful tool in maintenance decision-making process.

Light Water Breeder Reactor fuel rod design and performance characteristics (LWBR Development Program)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, W.R.; Giovengo, J.F.

1987-10-01

Light Water Breeder Reactor (LWBR) fuel rods were designed to provide a reliable fuel system utilizing thorium/uranium-233 mixed-oxide fuel while simultaneously minimizing structural material to enhance fuel breeding. The fuel system was designed to be capable of operating successfully under both load follow and base load conditions. The breeding objective required thin-walled, low hafnium content Zircaloy cladding, tightly spaced fuel rods with a minimum number of support grid levels, and movable fuel rod bundles to supplant control rods. Specific fuel rod design considerations and their effects on performance capability are described. Successful completion of power operations to over 160 percentmore » of design lifetime including over 200 daily load follow cycles has proven the performance capability of the fuel system. 68 refs., 19 figs., 44 tabs.« less

Mobile Robot and Mobile Manipulator Research Towards ASTM Standards Development

PubMed Central

Bostelman, Roger; Hong, Tsai; Legowik, Steven

2017-01-01

Performance standards for industrial mobile robots and mobile manipulators (robot arms onboard mobile robots) have only recently begun development. Low cost and standardized measurement techniques are needed to characterize system performance, compare different systems, and to determine if recalibration is required. This paper discusses work at the National Institute of Standards and Technology (NIST) and within the ASTM Committee F45 on Driverless Automatic Guided Industrial Vehicles. This includes standards for both terminology, F45.91, and for navigation performance test methods, F45.02. The paper defines terms that are being considered. Additionally, the paper describes navigation test methods that are near ballot and docking test methods being designed for consideration within F45.02. This includes the use of low cost artifacts that can provide alternatives to using relatively expensive measurement systems. PMID:28690359

The fourth dimension: A motoric perspective on the anxiety-performance relationship.

PubMed

Carson, Howie J; Collins, Dave

2016-01-01

This article focuses on raising concern that anxiety-performance relationship theory has insufficiently catered for motoric issues during, primarily, closed and self-paced skill execution (e.g., long jump and javelin throw). Following a review of current theory, we address the under-consideration of motoric issues by extending the three-dimensional model put forward by Cheng, Hardy, and Markland (2009) ('Toward a three-dimensional conceptualization of performance anxiety: Rationale and initial measurement development, Psychology of Sport and Exercise , 10 , 271-278). This fourth dimension, termed skill establishment , comprises the level and consistency of movement automaticity together with a performer's confidence in this specific process, as providing a degree of robustness against negative anxiety effects. To exemplify this motoric influence, we then offer insight regarding current theories' misrepresentation that a self-focus of attention toward an already well-learned skill always leads to a negative performance effect. In doing so, we draw upon applied literature to distinguish between positive and negative self-foci and suggest that on what and how a performer directs their attention is crucial to the interaction with skill establishment and, therefore, performance. Finally, implications for skill acquisition research are provided. Accordingly, we suggest a positive potential flow from applied/translational to fundamental/theory-generating research in sport which can serve to freshen and usefully redirect investigation into this long-considered but still insufficiently understood concept.

The fourth dimension: A motoric perspective on the anxiety–performance relationship

PubMed Central

Carson, Howie J.; Collins, Dave

2016-01-01

ABSTRACT This article focuses on raising concern that anxiety–performance relationship theory has insufficiently catered for motoric issues during, primarily, closed and self-paced skill execution (e.g., long jump and javelin throw). Following a review of current theory, we address the under-consideration of motoric issues by extending the three-dimensional model put forward by Cheng, Hardy, and Markland (2009) (‘Toward a three-dimensional conceptualization of performance anxiety: Rationale and initial measurement development, Psychology of Sport and Exercise, 10, 271–278). This fourth dimension, termed skill establishment, comprises the level and consistency of movement automaticity together with a performer's confidence in this specific process, as providing a degree of robustness against negative anxiety effects. To exemplify this motoric influence, we then offer insight regarding current theories’ misrepresentation that a self-focus of attention toward an already well-learned skill always leads to a negative performance effect. In doing so, we draw upon applied literature to distinguish between positive and negative self-foci and suggest that on what and how a performer directs their attention is crucial to the interaction with skill establishment and, therefore, performance. Finally, implications for skill acquisition research are provided. Accordingly, we suggest a positive potential flow from applied/translational to fundamental/theory-generating research in sport which can serve to freshen and usefully redirect investigation into this long-considered but still insufficiently understood concept. PMID:26692896

Providing for consideration of the bill (H.R. 6083) to provide for the reform and continuation of agricultural and other programs of the Department of Agriculture through fiscal year 2017, and for other purposes.

THOMAS, 112th Congress

Rep. Braley, Bruce L. [D-IA-1

2012-07-24

House - 09/13/2012 Motion to Discharge Committee filed by Mr. Braley (IA). Petition No: 112-5. (All Actions) Notes: On 9/13/2012, a motion was filed to discharge the Committee on Rules from the consideration of H.Res.739 a resolution providing for consideration of H.R.6083. A discharge petition requires 218 signatures for further action. (Discharge Petition No. 112-5: text with signatures.) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Consideration of Cosmetic Surgery As Part of Women’s Benefit-Provisioning Mate Retention Strategy

PubMed Central

Atari, Mohammad; Barbaro, Nicole; Sela, Yael; Shackelford, Todd K.; Chegeni, Razieh

2017-01-01

Individuals perform mate retention behaviors to minimize the risk of partner infidelity and relationship dissolution. The current study investigates whether consideration of cosmetic surgery can be conceptualized as part of a broader strategy of mate retention for women, but not men. We hypothesized that women’s consideration of cosmetic surgery would be positively associated with performance frequencies of Benefit-Provisioning and Cost-Inflicting mate retention behaviors. We recruited 203 individuals (54% women) in committed heterosexual relationships from Tehran, Iran. Results indicate a positive association between consideration of cosmetic surgery and Benefit-Provisioning mate retention behaviors for women, but not men. There was no association between consideration of cosmetic surgery and Cost-Inflicting mate retention behaviors. Women therefore may consider cosmetic surgery to improve their physical attractiveness as part of a Benefit-Provisioning strategy to retain a long-term mate. We discuss limitations of the study and highlight future directions for research from an evolutionary perspective. PMID:28855884

The interpersonal work of dental conscious sedation: A qualitative analysis.

PubMed

Woolley, Stephen M; Chadwick, Barbara; Pugsley, Lesley

2017-08-01

Whilst there is a considerable body of literature examining the pharmacology of conscious sedation, the social tasks required to successfully provide conscious sedation have not been reported. This paper discusses data regarding the interpersonal work integral to effective conscious sedation provision, from a larger qualitative study exploring how patients and clinicians engage with secondary care conscious sedation provided within the UK. Semi-structured interviews were conducted with 13 conscious sedation providers and nine patients within UK-based secondary care sedation settings. Digital audio-recordings were transcribed verbatim and subsequently analysed using a constant comparative method within NVivo Data Analysis Software. Four main themes of interpersonal work were reported by participants: displaying care, containing emotions, demonstrating competence and maximizing the effect. This study shows that performing conscious sedation requires more than technical delivery, and involves the projection of attributes in a literal "performance." The importance of managing outward emotional appearance reflects previous dental research. The need to manage outward appearance, and the emotional impact this has, is of relevance to all clinicians. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Molecular genetics external quality assessment pilot scheme for KRAS analysis in metastatic colorectal cancer.

PubMed

Deans, Zandra C; Tull, Justyna; Beighton, Gemma; Abbs, Stephen; Robinson, David O; Butler, Rachel

2011-11-01

Laboratories are increasingly required to perform molecular tests for the detection of mutations in the KRAS gene in metastatic colorectal cancers to allow better clinical management and more effective treatment for these patients. KRAS mutation status predicts a patient's likely response to the monoclonal antibody cetuximab. To provide a high standard of service, these laboratories require external quality assessment (EQA) to monitor the level of laboratory output and measure the performance of the laboratory against other service providers. National External Quality Assurance Services for Molecular Genetics provided a pilot EQA scheme for KRAS molecular analysis in metastatic colorectal cancers during 2009. Very few genotyping errors were reported by participating laboratories; however, the reporting nomenclature of the genotyping results varied considerably between laboratories. The pilot EQA scheme highlighted the need for continuing EQA in this field which will assess the laboratories' ability not only to obtain accurate, reliable results but also to interpret them safely and correctly ensuring that the referring clinician has the correct information to make the best clinical therapeutic decision for their patient.

A reconstruction algorithm for helical CT imaging on PI-planes.

PubMed

Liang, Hongzhu; Zhang, Cishen; Yan, Ming

2006-01-01

In this paper, a Feldkamp type approximate reconstruction algorithm is presented for helical cone-beam Computed Tomography. To effectively suppress artifacts due to large cone angle scanning, it is proposed to reconstruct the object point-wisely on unique customized tilted PI-planes which are close to the data collecting helices of the corresponding points. Such a reconstruction scheme can considerably suppress the artifacts in the cone-angle scanning. Computer simulations show that the proposed algorithm can provide improved imaging performance compared with the existing approximate cone-beam reconstruction algorithms.

Creating Accountable Care Organizations: The Extended Hospital Medical Staff

PubMed Central

Fisher, Elliott S.; Staiger, Douglas O.; Bynum, Julie P.W.; Gottlieb, Daniel J.

2007-01-01

Many current policies and approaches to performance measurement and payment reform focus on individual providers; they risk reinforcing the fragmented care and lack of coordination experienced by patients with serious illness. In this paper we show that Medicare beneficiaries receive most of their care from relatively coherent local delivery systems comprising physicians and the hospitals where they work or admit their patients. Efforts to create accountable care organizations at this level—the extended hospital medical staff—deserve consideration as a potential means of improving the quality and lowering the cost of care. PMID:17148490

Collaborative hospital orientation: simulation as a teaching strategy.

PubMed

Lamers, Karilyn; Janisse, Lisa; Brown, Gail; Butler, Carol; Watson, Barb

2013-01-01

For nurses, the stress caused by entering a new place of employment may give rise to insecurity and a lack of confidence. Lack of confidence in one's nursing skills can affect performance and, ultimately, patient care and safety. In healthcare, growing fiscal constraints have resulted in lost resources, and support for new nursing staff is limited by both time and cost considerations. Clinical educators therefore must find innovative ways to provide education and support, including creative learning modalities that facilitate nurses' transition into a new role and work environment.

Experimental test results of a generalized parameter fuel control

NASA Technical Reports Server (NTRS)

Batterton, P. G.; Gold, H.

1973-01-01

Considerable interest has been generated recently in low cost jet propulsion systems. One of the more complicated components of jet engines is the fuel control. Results of an effort to develop a simpler hydromechanical fuel control are presented. This prototype fuel control was installed on a J85-GE-13 jet engine. Results show that the fuel control provided satisfactory engine performance at sea level static conditions over its normal nonafterburning operating range, including startup. Results of both bench and engine tests are presented; the difficulties encountered are described.

DG Planning with Amalgamation of Operational and Reliability Considerations

NASA Astrophysics Data System (ADS)

Battu, Neelakanteshwar Rao; Abhyankar, A. R.; Senroy, Nilanjan

2016-04-01

Distributed Generation has been playing a vital role in dealing issues related to distribution systems. This paper presents an approach which provides policy maker with a set of solutions for DG placement to optimize reliability and real power loss of the system. Optimal location of a Distributed Generator is evaluated based on performance indices derived for reliability index and real power loss. The proposed approach is applied on a 15-bus radial distribution system and a 18-bus radial distribution system with conventional and wind distributed generators individually.

Multiple-modality program for standoff detection of roadside hazards

NASA Astrophysics Data System (ADS)

Williams, Kathryn; Middleton, Seth; Close, Ryan; Luke, Robert H.; Suri, Rajiv

2016-05-01

The U.S. Army RDECOM CERDEC Night Vision and Electronic Sensors Directorate (NVESD) is executing a program to assess the performance of a variety of sensor modalities for standoff detection of roadside explosive hazards. The program objective is to identify an optimal sensor or combination of fused sensors to incorporate with autonomous detection algorithms into a system of systems for use in future route clearance operations. This paper provides an overview of the program, including a description of the sensors under consideration, sensor test events, and ongoing data analysis.

Electrochemical oxidation for landfill leachate treatment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deng, Yang; Englehardt, James D.

2007-07-01

This paper aims at providing an overview of electrochemical oxidation processes used for treatment of landfill leachate. The typical characteristics of landfill leachate are briefly reviewed, and the reactor designs used for electro-oxidation of leachate are summarized. Electrochemical oxidation can significantly reduce concentrations of organic contaminants, ammonia, and color in leachate. Pretreatment methods, anode materials, pH, current density, chloride concentration, and other additional electrolytes can considerably influence performance. Although high energy consumption and potential chlorinated organics formation may limit its application, electrochemical oxidation is a promising and powerful technology for treatment of landfill leachate.

Monolithic Microwave Integrated Circuits Based on GaAs Mesfet Technology

NASA Astrophysics Data System (ADS)

Bahl, Inder J.

Advanced military microwave systems are demanding increased integration, reliability, radiation hardness, compact size and lower cost when produced in large volume, whereas the microwave commercial market, including wireless communications, mandates low cost circuits. Monolithic Microwave Integrated Circuit (MMIC) technology provides an economically viable approach to meeting these needs. In this paper the design considerations for several types of MMICs and their performance status are presented. Multifunction integrated circuits that advance the MMIC technology are described, including integrated microwave/digital functions and a highly integrated transceiver at C-band.

A comparison of two central difference schemes for solving the Navier-Stokes equations

NASA Technical Reports Server (NTRS)

Maksymiuk, C. M.; Swanson, R. C.; Pulliam, T. H.

1990-01-01

Five viscous transonic airfoil cases were computed by two significantly different computational fluid dynamics codes: An explicit finite-volume algorithm with multigrid, and an implicit finite-difference approximate-factorization method with Eigenvector diagonalization. Both methods are described in detail, and their performance on the test cases is compared. The codes utilized the same grids, turbulence model, and computer to provide the truest test of the algorithms. The two approaches produce very similar results, which, for attached flows, also agree well with experimental results; however, the explicit code is considerably faster.

Non-quasiparticle states in a half-metallic ferromagnet with antiferromagnetic s-d(f) interaction.

PubMed

Irkhin, V Yu

2015-04-22

Non-quasiparticle (incoherent) states which play an important role in the electronic structure of half-metallic ferromagnets (HMF) are investigated consistently in the case of antiferromagnetic s-d(f) exchange interaction. Their appropriate description in the limit of strong correlations requires a rearrangement of perturbation series in comparison with the usual Dyson equation. This consideration provides a solution of the Kondo problem in the HMF case and can be important for first-principle HMF calculations performed earlier for ferromagnetic s-d(f) interaction.

Shuttle Ku-band bent-pipe implementation considerations. [for Space Shuttle digital communication systems

NASA Technical Reports Server (NTRS)

Batson, B. H.; Seyl, J. W.; Huth, G. K.

1977-01-01

This paper describes an approach for relay of data-modulated subcarriers from Shuttle payloads through the Shuttle Ku-band communications subsystem (and subsequently through a tracking and data relay satellite system to a ground terminal). The novelty is that a channel originally provided for baseband digital data is shown to be suitable for this purpose; the resulting transmission scheme is referred to as a narrowband bent-pipe scheme. Test results demonstrating the validity of the narrowband bent-pipe mode are presented, and limitations on system performance are described.

Performance Analysis of an Inter-Relay Co-operation in FSO Communication System

NASA Astrophysics Data System (ADS)

Khanna, Himanshu; Aggarwal, Mona; Ahuja, Swaran

2018-04-01

In this work, we analyze the outage and error performance of a one-way inter-relay assisted free space optical link. The assumption of the absence of direct link between the source and destination node is being made for the analysis, and the feasibility of such system configuration is studied. We consider the influence of path loss, atmospheric turbulence and pointing error impairments, and investigate the effect of these parameters on the system performance. The turbulence-induced fading is modeled by independent but not necessarily identically distributed gamma-gamma fading statistics. The closed-form expressions for outage probability and probability of error are derived and illustrated by numerical plots. It is concluded that the absence of line of sight path between source and destination nodes does not lead to significant performance degradation. Moreover, for the system model under consideration, interconnected relaying provides better error performance than the non-interconnected relaying and dual-hop serial relaying techniques.

Instructional design strategies for health behavior change.

PubMed

Kinzie, Mable B

2005-01-01

To help health educators build upon the best of different health behavior change theories, this paper offers a unified set of instructional design strategies for health education interventions. This set draws upon the recommendations of Rosenstock (Health Belief Model), Bandura (Social Cognitive Theory), and Dearing (Diffusion Theory), and uses a modified Events of Instruction framework (adapted from Robert Gagne): gain attention (convey health threats and benefits), present stimulus material (tailor message to audience knowledge and values, demonstrate observable effectiveness, make behaviors easy-to-understand and do), provide guidance (use trustworthy models to demonstrate), elicit performance and provide feedback (to enhance trialability, develop proficiency and self-efficacy), enhance retention and transfer (provide social supports and deliver behavioral cues). Sample applications of these strategies are provided. A brief review of research on adolescent smoking prevention enables consideration of the frequency with which these strategies are used, and possible patterns between strategy use and behavioral outcomes.

Key Value Considerations for Consultant Pharmacists.

PubMed

Meyer, Lee; Perry, Ronald G; Rhodus, Susan M; Stearns, Wendy

2016-07-01

Managing the efficiency and costs of residents' drug regimens outside the acute-care hospital and through transitions of care requires a toolbox filled with cost-control tools and careful collaboration among the pharmacy provider(s), facility staff, and the consultant/senior care pharmacist. This article will provide the reader with key long-term care business strategies that affect the profitability of the pharmacy provider in various care settings while, at the same time, ensuring optimal therapy for residents as they transition across levels of care. Readers can take away ideas on how to access critical information, what they can do with this information, and how they can improve the overall care process. Four experts in various aspects of pharmacy management share their insights on pharmacy practice issues including formulary management, performance metrics, short-cycle dispensing challenges/solutions, cost-control measures, facility surveys, billing practices, medication reconciliation, prospective medication reviews, and transitions of care.

Development of Torsional and Linear Piezoelectrically Driven Motors

NASA Technical Reports Server (NTRS)

Duong, Khanh; Newton, David; Garcia, Ephrahim

1996-01-01

The development of rotary and linear inchworm-motors using piezoelectric actuators is presented. The motors' design has the advantage of a macro and micro stepper motor with high load and speed. The torsional design is capable of fast angular positioning with micro level accuracy. Additionally, the rotary motor, as designed, can be used as a clutch/brake mechanism. Constructed prototype motors of both types along with their characteristics are presented. The torsional motor consists of a torsional section that provides angular displacement and torque, and two alternating clamping sections which provide the holding force. The motor relies on the principal piezoelectric coupling coefficient (d33) with no torsional elements, increasing its torque capability. The linear motor consists of a longitudinal vibrator that provides displacement and load, and two alternating clamping sections which provide the holding force. This design eliminates bending moment, tension and shear applied to the actuator elements, increase its load capability and life. Innovative flexure designs have been introduced for both motor types. Critical issues that affect the design and performance of the motors are explored and discussed. Experiments are performed demonstrating the motor prototypes based on the aforementioned design considerations.

Development and Evaluation of a Novel Survey Tool Assessing Inpatient Consult Service Performance.

PubMed

Miloslavsky, Eli M; Chang, Yuchiao

2017-12-01

Subspecialty consultation in inpatient medicine is increasing, and enhancing performance of consultation services may have a broad-reaching impact. Multisource feedback is an important tool in assessing competence and improving performance. A mechanism for primary team resident feedback on performance of consult services has not been described. We developed and evaluated an instrument designed to assess internal medicine (IM) subspecialty inpatient consult service performance. We hypothesized that the instrument would be feasible to administer and provide important information to fellowship directors. The instrument was administered in 2015 and 2016 at a single academic center. All IM residents were invited to evaluate 10 IM subspecialty consult services on 4 items and an overall satisfaction rating. The instrument allowed for free-text feedback to fellows. Program directors completed another survey assessing the impact of the consult service evaluation. A total of 113 residents responded (47 in 2015 and 66 in 2016, for a combined response rate of 35%). Each of the 4 items measured (communication, professionalism, teaching, and pushback) correlated significantly with the overall satisfaction rating in univariate and multivariate analyses. There were no differences in ratings across postgraduate year or year of administration. There was considerable variation in ratings among the services evaluated. The 7 program directors who provided feedback found the survey useful and made programmatic changes following evaluation implementation. A primary team resident evaluation of inpatient medicine subspecialty consult services is feasible, provides valuable information, and is associated with changes in consult service structure and curricula.

Sensor Network Middleware for Cyber-Physical Systems: Opportunities and Challenges

NASA Astrophysics Data System (ADS)

Singh, G.

2015-12-01

Wireless Sensor Network middleware typically provides abstractions for common tasks such as atomicity, synchronization and communication with the intention of isolating the developers of distributed applications from lower-level details of the underlying platforms. Developing middleware to meet the performance constraints of applications is an important challenge. Although one would like to develop generic middleware services which can be used in a variety of different applications, efficiency considerations often force developers to design middleware and algorithms customized to specific operational contexts. This presentation will discuss techniques to design middleware that is customizable to suit the performance needs of specific applications. We also discuss the challenges poised in designing middleware for pervasive sensor networks and cyber-physical systems with specific focus on environmental monitoring.

A Shuttle Derived Vehicle launch system

NASA Technical Reports Server (NTRS)

Tewell, J. R.; Buell, D. N.; Ewing, E. S.

1982-01-01

This paper describes a Shuttle Derived Vehicle (SDV) launch system presently being studied for the NASA by Martin Marietta Aerospace which capitalizes on existing Shuttle hardware elements to provide increased accommodations for payload weight, payload volume, or both. The SDV configuration utilizes the existing solid rocket boosters, external tank and the Space Shuttle main engines but replaces the manned orbiter with an unmanned, remotely controlled cargo carrier. This cargo carrier substitution more than doubles the performance capability of the orbiter system and is realistically achievable for minimal cost. The advantages of the SDV are presented in terms of performance and economics. Based on these considerations, it is concluded that an unmanned SDV offers a most attractive complement to the present Space Transportation System.

A performance analysis of ensemble averaging for high fidelity turbulence simulations at the strong scaling limit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makarashvili, Vakhtang; Merzari, Elia; Obabko, Aleksandr

We analyze the potential performance benefits of estimating expected quantities in large eddy simulations of turbulent flows using true ensembles rather than ergodic time averaging. Multiple realizations of the same flow are simulated in parallel, using slightly perturbed initial conditions to create unique instantaneous evolutions of the flow field. Each realization is then used to calculate statistical quantities. Provided each instance is sufficiently de-correlated, this approach potentially allows considerable reduction in the time to solution beyond the strong scaling limit for a given accuracy. This study focuses on the theory and implementation of the methodology in Nek5000, a massively parallelmore » open-source spectral element code.« less

A performance analysis of ensemble averaging for high fidelity turbulence simulations at the strong scaling limit

DOE PAGES

Makarashvili, Vakhtang; Merzari, Elia; Obabko, Aleksandr; ...

2017-06-07

We analyze the potential performance benefits of estimating expected quantities in large eddy simulations of turbulent flows using true ensembles rather than ergodic time averaging. Multiple realizations of the same flow are simulated in parallel, using slightly perturbed initial conditions to create unique instantaneous evolutions of the flow field. Each realization is then used to calculate statistical quantities. Provided each instance is sufficiently de-correlated, this approach potentially allows considerable reduction in the time to solution beyond the strong scaling limit for a given accuracy. This study focuses on the theory and implementation of the methodology in Nek5000, a massively parallelmore » open-source spectral element code.« less

Design Evolutuion of Hot Isotatic Press Cans for NTP Cermet Fuel Fabrication

NASA Technical Reports Server (NTRS)

Mireles, O. R.; Broadway, J.; Hickman, R.

2014-01-01

Nuclear Thermal Propulsion (NTP) is under consideration for potential use in deep space exploration missions due to desirable performance properties such as a high specific impulse (> 850 seconds). Tungsten (W)-60vol%UO2 cermet fuel elements are under development, with efforts emphasizing fabrication, performance testing and process optimization to meet NTP service life requirements [1]. Fuel elements incorporate design features that provide redundant protection from crack initiation, crack propagation potentially resulting in hot hydrogen (H2) reduction of UO2 kernels. Fuel erosion and fission product retention barriers include W coated UO2 fuel kernels, W clad internal flow channels and fuel element external W clad resulting in a fully encapsulated fuel element design as shown.

Some system considerations in configuring a digital flight control - navigation system

NASA Technical Reports Server (NTRS)

Boone, J. H.; Flynn, G. R.

1976-01-01

A trade study was conducted with the objective of providing a technical guideline for selection of the most appropriate computer technology for the automatic flight control system of a civil subsonic jet transport. The trade study considers aspects of using either an analog, incremental type special purpose computer or a general purpose computer to perform critical autopilot computation functions. It also considers aspects of integration of noncritical autopilot and autothrottle modes into the computer performing the critical autoland functions, as compared to the federation of the noncritical modes into either a separate computer or with a R-Nav computer. The study is accomplished by establishing the relative advantages and/or risks associated with each of the computer configurations.

A Study of Wind Turbine Comprehensive Operational Assessment Model Based on EM-PCA Algorithm

NASA Astrophysics Data System (ADS)

Zhou, Minqiang; Xu, Bin; Zhan, Yangyan; Ren, Danyuan; Liu, Dexing

2018-01-01

To assess wind turbine performance accurately and provide theoretical basis for wind farm management, a hybrid assessment model based on Entropy Method and Principle Component Analysis (EM-PCA) was established, which took most factors of operational performance into consideration and reach to a comprehensive result. To verify the model, six wind turbines were chosen as the research objects, the ranking obtained by the method proposed in the paper were 4#>6#>1#>5#>2#>3#, which are completely in conformity with the theoretical ranking, which indicates that the reliability and effectiveness of the EM-PCA method are high. The method could give guidance for processing unit state comparison among different units and launching wind farm operational assessment.

Numerical Ergonomics Analysis in Operation Environment of CNC Machine

NASA Astrophysics Data System (ADS)

Wong, S. F.; Yang, Z. X.

2010-05-01

The performance of operator will be affected by different operation environments [1]. Moreover, poor operation environment may cause health problems of the operator [2]. Physical and psychological considerations are two main factors that will affect the performance of operator under different conditions of operation environment. In this paper, applying scientific and systematic methods find out the pivot elements in the field of physical and psychological factors. There are five main factors including light, temperature, noise, air flow and space that are analyzed. A numerical ergonomics model has been built up regarding the analysis results which can support to advance the design of operation environment. Moreover, the output of numerical ergonomic model can provide the safe, comfortable, more productive conditions for the operator.

Fast scintillation counter system and performance

NASA Technical Reports Server (NTRS)

Sasaki, H.; Nishioka, A.; Ohmori, N.; Kusumose, M.; Nakatsuka, T.; Horiki, T.; Hatano, Y.

1985-01-01

An experimental study of the fast scintillation counter (FS) system to observe a shower disk structure at Mt. Norikura is described, especially the system performance and a pulse wave-form by a single charge particles. The photomultiplier tube (PT) pulse appears at the leading edge of the main pulse. To remove this PT-pulse from the main pulse, the frame of the scintillator vessel was changed. The fast triggering system was made to decrease the dead time which came from the use of the function of the self triggering of the storage oscilloscope (OSC). To provide a new field on the multi-parameter study of the cosmic ray showers, the system response of the FS system also improved as a result of many considerations.

The “Task B problem” and other considerations in developmental functional neuroimaging

PubMed Central

Church, Jessica A.; Petersen, Steven E.; Schlaggar, Bradley L.

2012-01-01

Functional neuroimaging provides a remarkable tool to allow us to study cognition across the lifespan and in special populations in a safe way. However, experimenters face a number of methodological issues, and these issues are particularly pertinent when imaging children. This brief article discusses assessing task performance, strategies for dealing with group performance differences, controlling for movement, statistical power, proper atlas registration, and data analysis strategies. In addition, there will be discussion of two other topics that have important implications for interpreting fMRI data: the question of whether functional neuroanatomical differences between adults and children are the consequence of putative developmental neurovascular differences, and the issue of interpreting negative blood oxygenation-level dependent (BOLD) signal change. PMID:20496376

Intraoperative monitoring technician: a new member of the surgical team.

PubMed

Brown, Molly S; Brown, Debra S

2011-02-01

As surgery needs have increased, the traditional surgical team has expanded to include personnel from radiology and perfusion services. A new surgical team member, the intraoperative monitoring technician, is needed to perform intraoperative monitoring during procedures that carry a higher risk of central and peripheral nerve injury. Including the intraoperative monitoring technician on the surgical team can create challenges, including surgical delays and anesthesia care considerations. When the surgical team members, including the surgeon, anesthesia care provider, and circulating nurse, understand and facilitate this new staff member's responsibilities, the technician is able to perform monitoring functions that promote the smooth flow of the surgical procedure and positive patient outcomes. Copyright © 2011 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Experiment Needs and Facilities Study Appendix A Transient Reactor Test Facility (TREAT) Upgrade

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The TREAT Upgrade effort is designed to provide significant new capabilities to satisfy experiment requirements associated with key LMFBR Safety Issues. The upgrade consists of reactor-core modifications to supply the physics performance needed for the new experiments, an Advanced TREAT loop with size and thermal-hydraulics capabilities needed for the experiments, associated interface equipment for loop operations and handling, and facility modifications necessary to accommodate operations with the Loop. The costs and schedules of the tasks to be accomplished under the TREAT Upgrade project are summarized. Cost, including contingency, is about 10 million dollars (1976 dollars). A schedule for execution ofmore » 36 months has been established to provide the new capabilities in order to provide timely support of the LMFBR national effort. A key requirement for the facility modifications is that the reactor availability will not be interrupted for more than 12 weeks during the upgrade. The Advanced TREAT loop is the prototype for the STF small-bundle package loop. Modified TREAT fuel elements contain segments of graphite-matrix fuel with graded uranium loadings similar to those of STF. In addition, the TREAT upgrade provides for use of STF-like stainless steel-UO{sub 2} TREAT fuel for tests of fully enriched fuel bundles. This report will introduce the Upgrade study by presenting a brief description of the scope, performance capability, safety considerations, cost schedule, and development requirements. This work is followed by a "Design Description". Because greatly upgraded loop performance is central to the upgrade, a description is given of Advanced TREAT loop requirements prior to description of the loop concept. Performance requirements of the upgraded reactor system are given. An extensive discussion of the reactor physics calculations performed for the Upgrade concept study is provided. Adequate physics performance is essential for performance of experiments with the Advanced TREAT loop, and the stress placed on these calculations reflects this. Additional material on performance and safety is provided. Backup calculations on calculations of plutonium-release limits are described. Cost and schedule information for the Upgrade are presented.« less

34 CFR 606.23 - What special funding consideration does the Secretary provide?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false What special funding consideration does the Secretary provide? 606.23 Section 606.23 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION DEVELOPING HISPANIC-SERVING...

34 CFR 606.23 - What special funding consideration does the Secretary provide?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What special funding consideration does the Secretary provide? 606.23 Section 606.23 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION DEVELOPING HISPANIC-SERVING...

11 CFR 9008.9 - Receipt of goods and services from commercial vendors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... for promotional consideration. (1) A commercial vendor may provide goods or services in exchange for promotional consideration provided that doing so is in the ordinary course of business. (2) The provision of... shall not exceed the commercial benefit reasonably expected to be derived from the unique promotional...

26 CFR 1.72-4 - Exclusion ratio.

Code of Federal Regulations, 2014 CFR

2014-04-01

... consideration is given for a particular contract which provides for two or more annuity elements, an exclusion... aggregate of the expected returns under all the annuity elements provided thereunder. However, where the... elements are acquired for a single consideration, see paragraph (b)(1) of § 1.72-6. (3) The exclusion ratio...

26 CFR 1.72-4 - Exclusion ratio.

Code of Federal Regulations, 2011 CFR

2011-04-01

... consideration is given for a particular contract which provides for two or more annuity elements, an exclusion... aggregate of the expected returns under all the annuity elements provided thereunder. However, where the... elements are acquired for a single consideration, see paragraph (b)(1) of § 1.72-6. (3) The exclusion ratio...

26 CFR 1.72-4 - Exclusion ratio.

Code of Federal Regulations, 2012 CFR

2012-04-01

... consideration is given for a particular contract which provides for two or more annuity elements, an exclusion... aggregate of the expected returns under all the annuity elements provided thereunder. However, where the... elements are acquired for a single consideration, see paragraph (b)(1) of § 1.72-6. (3) The exclusion ratio...

26 CFR 1.72-4 - Exclusion ratio.

Code of Federal Regulations, 2013 CFR

2013-04-01

... consideration is given for a particular contract which provides for two or more annuity elements, an exclusion... aggregate of the expected returns under all the annuity elements provided thereunder. However, where the... elements are acquired for a single consideration, see paragraph (b)(1) of § 1.72-6. (3) The exclusion ratio...

Operational Considerations in the Organization of Indian Business Enterprises.

ERIC Educational Resources Information Center

Brudevold, Daniel L.; And Others

1982-01-01

To provide Tribal Councils and enterprises with fundamental guidelines to organize and administer enterprises as profit-seeking businesses, the paper is presented in four sections: differences in basic purposes (business vs. government); organizational considerations; fiscal management considerations; and guidelines for organizing and establishing…

Technical Basis for Assessing Uranium Bioremediation Performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

PE Long; SB Yabusaki; PD Meyer

2008-04-01

In situ bioremediation of uranium holds significant promise for effective stabilization of U(VI) from groundwater at reduced cost compared to conventional pump and treat. This promise is unlikely to be realized unless researchers and practitioners successfully predict and demonstrate the long-term effectiveness of uranium bioremediation protocols. Field research to date has focused on both proof of principle and a mechanistic level of understanding. Current practice typically involves an engineering approach using proprietary amendments that focuses mainly on monitoring U(VI) concentration for a limited time period. Given the complexity of uranium biogeochemistry and uranium secondary minerals, and the lack of documentedmore » case studies, a systematic monitoring approach using multiple performance indicators is needed. This document provides an overview of uranium bioremediation, summarizes design considerations, and identifies and prioritizes field performance indicators for the application of uranium bioremediation. The performance indicators provided as part of this document are based on current biogeochemical understanding of uranium and will enable practitioners to monitor the performance of their system and make a strong case to clients, regulators, and the public that the future performance of the system can be assured and changes in performance addressed as needed. The performance indicators established by this document and the information gained by using these indicators do add to the cost of uranium bioremediation. However, they are vital to the long-term success of the application of uranium bioremediation and provide a significant assurance that regulatory goals will be met. The document also emphasizes the need for systematic development of key information from bench scale tests and pilot scales tests prior to full-scale implementation.« less

The James Webb Telescope Instrument Suite Layout: Optical System Engineering Considerations for a Large, Deployable Space Telescope

NASA Technical Reports Server (NTRS)

Bos, Brent; Davila, Pam; Jurotich, Matthew; Hobbs, Gurnie; Lightsey, Paul; Contreras, Jim; Whitman, Tony

2003-01-01

The James Webb Space Telescope (JWST) is a space-based, infrared observatory designed to study the early stages of galaxy formation in the Universe. The telescope will be launched into an elliptical orbit about the second Lagrange point and passively cooled to 30-50 K to enable astronomical observations from 0.6 to 28 microns. A group from the NASA Goddard Space Flight Center and the Northrop Grumman Space Technology prime contractor team has developed an optical and mechanical layout for the science instruments within the JWST field of view that satisfies the telescope s high-level performance requirements. Four instruments required accommodation within the telescope's field of view: a Near-Infrared Camera (NIRCam) provided by the University of Arizona; a Near-Mared Spectrometer (NIRSpec) provided by the European Space Agency; a Mid-Infrared Instrument (MIRI) provided by the Jet Propulsion Laboratory and a European consortium; and a Fine Guidance Sensor (FGS) with a tunable filter module provided by the Canadian Space Agency. The size and position of each instrument's field of view allocation were developed through an iterative, concurrent engineering process involving the key observatory stakeholders. While some of the system design considerations were those typically encountered during the development of an infrared observatory, others were unique to the deployable and controllable nature of JWST. This paper describes the optical and mechanical issues considered during the field of view layout development, as well as the supporting modeling and analysis activities.

Scenarios for the Hanford immobilized Low-Activity waste (ILAW) performance assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

MANN, F.M.

The purpose of the next version of the Hanford Immobilized Low-Activity Tank Waste (ILAW) Performance Assessment (ILAW PA) is to provide an updated estimate of the long-term human health and environmental impact of the disposal of ILAW and to compare these estimates against performance objectives displayed in Tables 1,2, and 3 (Mann 1999a). Such a radiological performance assessment is required by U.S. Department of Energy (DOE) Orders on radioactive waste management (DOE 1988a and DOE 1999a). This document defines the scenarios that will be used for the next update of the PA that is scheduled to be issued in 2001.more » Since the previous performance assessment (Mann 1998) was issued, considerable additional data on waste form behavior and site-specific soil geotechnical properties have been collected. In addition, the 2001 ILAW PA will benefit from improved computer models and the experience gained from the previous performance assessment. However, the scenarios (that is, the features, events, and processes analyzed in the Performance assessment) for the next PA are very similar to the ones in the 1998 PA.« less

Application of the Systematic Sensor Selection Strategy for Turbofan Engine Diagnostics

NASA Technical Reports Server (NTRS)

Sowers, T. Shane; Kopasakis, George; Simon, Donald L.

2008-01-01

The data acquired from available system sensors forms the foundation upon which any health management system is based, and the available sensor suite directly impacts the overall diagnostic performance that can be achieved. While additional sensors may provide improved fault diagnostic performance, there are other factors that also need to be considered such as instrumentation cost, weight, and reliability. A systematic sensor selection approach is desired to perform sensor selection from a holistic system-level perspective as opposed to performing decisions in an ad hoc or heuristic fashion. The Systematic Sensor Selection Strategy is a methodology that optimally selects a sensor suite from a pool of sensors based on the system fault diagnostic approach, with the ability of taking cost, weight, and reliability into consideration. This procedure was applied to a large commercial turbofan engine simulation. In this initial study, sensor suites tailored for improved diagnostic performance are constructed from a prescribed collection of candidate sensors. The diagnostic performance of the best performing sensor suites in terms of fault detection and identification are demonstrated, with a discussion of the results and implications for future research.

Application of the Systematic Sensor Selection Strategy for Turbofan Engine Diagnostics

NASA Technical Reports Server (NTRS)

Sowers, T. Shane; Kopasakis, George; Simon, Donald L.

2008-01-01

The data acquired from available system sensors forms the foundation upon which any health management system is based, and the available sensor suite directly impacts the overall diagnostic performance that can be achieved. While additional sensors may provide improved fault diagnostic performance there are other factors that also need to be considered such as instrumentation cost, weight, and reliability. A systematic sensor selection approach is desired to perform sensor selection from a holistic system-level perspective as opposed to performing decisions in an ad hoc or heuristic fashion. The Systematic Sensor Selection Strategy is a methodology that optimally selects a sensor suite from a pool of sensors based on the system fault diagnostic approach, with the ability of taking cost, weight and reliability into consideration. This procedure was applied to a large commercial turbofan engine simulation. In this initial study, sensor suites tailored for improved diagnostic performance are constructed from a prescribed collection of candidate sensors. The diagnostic performance of the best performing sensor suites in terms of fault detection and identification are demonstrated, with a discussion of the results and implications for future research.

The effect of environmental regulation on firms' competitive performance: the case of the building & construction sector in some EU regions.

PubMed

Testa, Francesco; Iraldo, Fabio; Frey, Marco

2011-09-01

There is a considerable debate on the effects of environmental regulation on competitive performance. Based on survey data, this paper analyzes the two main research questions, derived from literature, on the links between environmental regulation and competitiveness, by focusing on firms operating in the building and construction sector, i.e.: 1) whether environmental policy stringency affects the competitive performance of firms in the building and construction sector 2) and how a specific form of environmental regulation (direct regulation, economic instruments and soft instruments) affects this performance? By applying a regression analysis, we find that a more stringent environmental regulation, measured by inspection frequency, provides a positive impulse for increasing investments in advanced technological equipment and innovative products and on business performance. Moreover, a well-designed "direct regulation" appears to be the most effective policy instrument for prompting the positive impact of environmental policies on innovation and intangible performance while economic instruments do negatively affect business performance. Copyright © 2011 Elsevier Ltd. All rights reserved.

Providing for consideration of the bill (H.R. 5230) making supplemental appropriations for the fiscal year ending September 30, 2014, and for other purposes; providing for consideration of the bill (H.R. 5272) to prohibit certain actions with respect to deferred action for aliens not lawfully present in the United States, and for other purposes; providing for consideration of the Senate amendment to the bill (H.R. 5021) to provide an extension of Federal-aid highway, highway safety, motor carrier safety, transit, and other programs funded out of the Highway Trust Fund, and for other purposes; and for other purposes.

THOMAS, 113th Congress

Rep. Cole, Tom [R-OK-4

2014-07-30

House - 07/31/2014 On agreeing to the resolution Agreed to by recorded vote: 220 - 205 (Roll no. 472). (All Actions) Tracker: This bill has the status Agreed to in HouseHere are the steps for Status of Legislation:

Design and manufacturing considerations for high-performance gimbals used for land, sea, air, and space

NASA Astrophysics Data System (ADS)

Sweeney, Mike; Redd, Lafe; Vettese, Tom; Myatt, Ray; Uchida, David; Sellers, Del

2015-09-01

High performance stabilized EO/IR surveillance and targeting systems are in demand for a wide variety of military, law enforcement, and commercial assets for land, sea, air, and space. Operating ranges, wavelengths, and angular resolution capabilities define the requirements for EO/IR optics and sensors, and line of sight stabilization. Many materials and design configurations are available for EO/IR pointing gimbals depending on trade-offs of size, weight, power (SWaP), performance, and cost. Space and high performance military aircraft applications are often driven toward expensive but exceptionally performing beryllium and aluminum beryllium components. Commercial applications often rely on aluminum and composite materials. Gimbal design considerations include achieving minimized mass and inertia simultaneous with demanding structural, thermal, optical, and scene stabilization requirements when operating in dynamic operational environments. Manufacturing considerations include precision lapping and honing of ball bearing interfaces, brazing, welding, and casting of complex aluminum and beryllium alloy structures, and molding of composite structures. Several notional and previously developed EO/IR gimbal platforms are profiled that exemplify applicable design and manufacturing technologies.

33 CFR 239.5 - Engineering considerations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 3 2014-07-01 2014-07-01 false Engineering considerations. 239.5 Section 239.5 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF... § 239.5 Engineering considerations. Reports on proposals to provide covered channels shall include a...

33 CFR 239.5 - Engineering considerations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Engineering considerations. 239.5 Section 239.5 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF... § 239.5 Engineering considerations. Reports on proposals to provide covered channels shall include a...

33 CFR 239.5 - Engineering considerations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Engineering considerations. 239.5 Section 239.5 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF... § 239.5 Engineering considerations. Reports on proposals to provide covered channels shall include a...

33 CFR 239.5 - Engineering considerations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Engineering considerations. 239.5 Section 239.5 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF... § 239.5 Engineering considerations. Reports on proposals to provide covered channels shall include a...

33 CFR 239.5 - Engineering considerations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Engineering considerations. 239.5 Section 239.5 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF... § 239.5 Engineering considerations. Reports on proposals to provide covered channels shall include a...

Are History Textbooks More "Considerate" after 20 Years?

ERIC Educational Resources Information Center

Berkeley, Sheri; King-Sears, Margaret E.; Hott, Brittany L.; Bradley-Black, Katherine

2014-01-01

Features of eighth-grade history textbooks were examined through replication of a 20-year-old study that investigated "considerateness" of textbooks. Considerate texts provide clear, coherent information and include features that promote students' comprehension, such as explicit use of organizational structures, a range of question types…

Technical considerations for designing low-cost, long-wave infrared objectives

NASA Astrophysics Data System (ADS)

Desroches, Gerard; Dalzell, Kristy; Robitaille, Blaise

2014-06-01

With the growth of uncooled infrared imaging in the consumer market, the balance between cost implications and performance criteria in the objective lens must be examined carefully. The increased availability of consumer-grade, long-wave infrared cameras is related to a decrease in military usage but it is also due to the decreasing costs of the cameras themselves. This has also driven up demand for low-cost, long-wave objectives that can resolve smaller pixels while maintaining high performance. Smaller pixels are traditionally associated with high cost objectives because of higher resolution requirements but, with careful consideration of all the requirements and proper selection of materials, costs can be moderated. This paper examines the cost/performance trade-off implications associated with optical and mechanical requirements of long-wave infrared objectives. Optical performance, f-number, field of view, distortion, focus range and thermal range all affect the cost of the objective. Because raw lens material cost is often the most expensive item in the construction, selection of the material as well as the shape of the lens while maintaining acceptable performance and cost targets were explored. As a result of these considerations, a low-cost, lightweight, well-performing objective was successfully designed, manufactured and tested.

Providing for the consideration of the bill (S. 815) to prohibit employment discrimination on the basis of sexual orientation or gender identity.

THOMAS, 113th Congress

Rep. Polis, Jared [D-CO-2

2014-07-22

House - 09/17/2014 Motion to Discharge Committee filed by Mr. Polis. Petition No: 113-11. (All Actions) Notes: On 9/17/2014, a motion was filed to discharge the Committee on Rules from the consideration of H.Res.678 a resolution providing for consideration of S.815. A discharge petition requires 218 signatures for further action. (Discharge Petition No. 113-11: text with signatures.) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Producibility consideration for millimeter-wave transceivers

NASA Astrophysics Data System (ADS)

Seashore, Charles R.

1995-10-01

Considerable progress has been made in the development and demonstration of millimeter wave MMIC technology up to frequencies approaching 100 GHz. The recently completed multiyear, ARPA-sponsored, MIMIC program provided a considerable amount of funding and government-contractor team energy to advance the state-of-art with a number of important GaAs-based transceiver building blocks. Unfortuanely, producibility of millimeter wave MMIC transceiver modules has not been similarly addressed to provide a truly low cost, marketable product. This paper considers the module producibility problem and its various technological implications.

Second-Tier Database for Ecosystem Focus, 2003-2004 Annual Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

University of Washington, Columbia Basin Research, DART Project Staff,

2004-12-01

The Second-Tier Database for Ecosystem Focus (Contract 00004124) provides direct and timely public access to Columbia Basin environmental, operational, fishery and riverine data resources for federal, state, public and private entities essential to sound operational and resource management. The database also assists with juvenile and adult mainstem passage modeling supporting federal decisions affecting the operation of the FCRPS. The Second-Tier Database known as Data Access in Real Time (DART) integrates public data for effective access, consideration and application. DART also provides analysis tools and performance measures for evaluating the condition of Columbia Basin salmonid stocks. These services are critical tomore » BPA's implementation of its fish and wildlife responsibilities under the Endangered Species Act (ESA).« less

Plasticity models of material variability based on uncertainty quantification techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, Reese E.; Rizzi, Francesco; Boyce, Brad

The advent of fabrication techniques like additive manufacturing has focused attention on the considerable variability of material response due to defects and other micro-structural aspects. This variability motivates the development of an enhanced design methodology that incorporates inherent material variability to provide robust predictions of performance. In this work, we develop plasticity models capable of representing the distribution of mechanical responses observed in experiments using traditional plasticity models of the mean response and recently developed uncertainty quantification (UQ) techniques. Lastly, we demonstrate that the new method provides predictive realizations that are superior to more traditional ones, and how these UQmore » techniques can be used in model selection and assessing the quality of calibrated physical parameters.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Delahaye, J-P.; Ankenbrandt, C.; Bogacz, A.

A Neutrino Factory where neutrinos of all species are produced in equal quantities by muon decay is described as a facility at the intensity frontier for exquisite precision providing ideal conditions for ultimate neutrino studies and the ideal complement to Long Baseline Facilities like LBNF at Fermilab. It is foreseen to be built in stages with progressively increasing complexity and performance, taking advantage of existing or proposed facilities at an existing laboratory like Fermilab. A tentative layout based on a recirculating linac providing opportunities for considerable saving is discussed as well as its possible evolution toward a muon collider ifmore » and when requested by Physics. Tentative parameters of the various stages are presented as well as the necessary R&D to address the technological issues and demonstrate their feasibility.« less

GASP- General Aviation Synthesis Program. Volume 6: Performance

NASA Technical Reports Server (NTRS)

Hague, D.

1978-01-01

Aircraft performance modeling requires consideration of propulsion, aerodynamics, and weight characteristics. Eleven subroutines used in modeling aircraft performance are presented and their interactions considered. Manuals for performance model users and programmers are included.

Image Quality Modeling and Characterization of Nyquist Sampled Framing Systems with Operational Considerations for Remote Sensing

NASA Astrophysics Data System (ADS)

Garma, Rey Jan D.

The trade between detector and optics performance is often conveyed through the Q metric, which is defined as the ratio of detector sampling frequency and optical cutoff frequency. Historically sensors have operated at Q ≈ 1, which introduces aliasing but increases the system modulation transfer function (MTF) and signal-to-noise ratio (SNR). Though mathematically suboptimal, such designs have been operationally ideal when considering system parameters such as pointing stability and detector performance. Substantial advances in read noise and quantum efficiency of modern detectors may compensate for the negative aspects associated with balancing detector/optics performance, presenting an opportunity to revisit the potential for implementing Nyquist-sampled (Q ≈ 2) sensors. A digital image chain simulation is developed and validated against a laboratory testbed using objective and subjective assessments. Objective assessments are accomplished by comparison of the modeled MTF and measurements from slant-edge photographs. Subjective assessments are carried out by performing a psychophysical study where subjects are asked to rate simulation and testbed imagery against a DeltaNIIRS scale with the aid of a marker set. Using the validated model, additional test cases are simulated to study the effects of increased detector sampling on image quality with operational considerations. First, a factorial experiment using Q-sampling, pointing stability, integration time, and detector performance is conducted to measure the main effects and interactions of each on the response variable, DeltaNIIRS. To assess the fidelity of current models, variants of the General Image Quality Equation (GIQE) are evaluated against subject-provided ratings and two modified GIQE versions are proposed. Finally, using the validated simulation and modified IQE, trades are conducted to ascertain the feasibility of implementing Q ≈ 2 designs in future systems.

Providing for consideration of the bill (H.R. 5743) to authorize appropriations for fiscal year 2013 for intelligence and intelligence-related activities of the United States Government, the Community Management Account, and the Central Intelligence Agency Retirement and Disability System, and for other purposes; providing for consideration of the bill (H.R. 5854) making appropriations for military construction, the Department of Veterans Affairs, and related agencies for the fiscal year ending September 30, 2013, and for other purposes; providing for consideration of the bill (H.R. 5855) making appropriations for the Department of Homeland Security for the fiscal year ending September 30, 2013, and for other purposes; and providing for consideration of the bill (H.R. 5325) making appropriations for energy and water development and related agencies for the fiscal year ending September 30, 2013, and for other purposes.

THOMAS, 112th Congress

Rep. Nugent, Richard B. [R-FL-5

2012-05-30

House - 05/31/2012 Pursuant to a previous special order, amendments numbered 4 and 6 printed in House Report 112-504 are modified to include amendatory instructions. (All Actions) Tracker: This bill has the status Agreed to in HouseHere are the steps for Status of Legislation:

Power Plant Replacement Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reed, Gary

2010-09-30

This report represents the final report for the Eastern Illinois University power plant replacement study. It contains all related documentation from consideration of possible solutions to the final recommended option. Included are the economic justifications associated with the chosen solution along with application for environmental permitting for the selected project for construction. This final report will summarize the results of execution of an EPC (energy performance contract) investment grade audit (IGA) which lead to an energy services agreement (ESA). The project includes scope of work to design and install energy conservation measures which are guaranteed by the contractor to bemore » self-funding over its twenty year contract duration. The cost recovery is derived from systems performance improvements leading to energy savings. The prime focus of this EPC effort is to provide a replacement solution for Eastern Illinois University’s aging and failing circa 1925 central steam production plant. Twenty-three ECMs were considered viable whose net impact will provide sufficient savings to successfully support the overall project objectives.« less

Issues and Challenges Facing Flexible Lithium-Ion Batteries for Practical Application.

PubMed

Cha, Hyungyeon; Kim, Junhyeok; Lee, Yoonji; Cho, Jaephil; Park, Minjoon

2017-12-27

With the advent of flexible electronics, lithium-ion batteries have become a key component of high performance energy storage systems. Thus, considerable effort is made to keep up with the development of flexible lithium-ion batteries. To date, many researchers have studied newly designed batteries with flexibility, however, there are several significant challenges that need to be overcome, such as degradation of electrodes under external load, poor battery performance, and complicated cell preparation procedures. In addition, an in-depth understanding of the current challenges for flexible batteries is rarely addressed in a systematical and practical way. Herein, recent progress and current issues of flexible lithium-ion batteries in terms of battery materials and cell designs are reviewed. A critical overview of important issues and challenges for the practical application of flexible lithium-ion batteries is also provided. Finally, the strategies are discussed to overcome current limitations of the practical use of flexible lithium-based batteries, providing a direction for future research. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A high-performance constant-temperature hot-wire anemometer

NASA Technical Reports Server (NTRS)

Watmuff, Jonathan H.

1994-01-01

A high-performance constant-temperature hot-wire anemometer has been designed based on a system theory analysis that can be extended to arbitrary order. A motivating factor behind the design was to achieve the highest possible frequency response while ensuring overall system stability. Based on these considerations, the design of the circuit and the selection of components is discussed in depth. Basic operating instructions are included in an operator's guide. The analysis is used to identify operating modes, observed in all anemometers, that are misleading in the sense that the operator can be deceived by interpreting an erroneous frequency response. Unlike other anemometers, this instrument provides front panel access to all the circuit parameters which affect system stability and frequency response. Instructions are given on how to identify and avoid these rather subtle and undesirable operating modes by appropriate adjustment of the controls. Details, such as fabrication drawings and a parts list, are provided to enable others to construct the instrument.

Liquid Space Lubricants Examined by Vibrational Micro-Spectroscopy

NASA Technical Reports Server (NTRS)

Street, Kenneth W., Jr.

2008-01-01

Considerable effort has been expended to develop liquid lubricants for satellites and space exploration vehicles. These lubricants must often perform under a range of harsh conditions such as vacuum, radiation, and temperature extremes while in orbit or in transit and in extremely dusty environments at destinations such as the Moon and Mars. Historically, oil development was guided by terrestrial application, which did not provide adequate space lubricants. Novel fluids such as the perfluorinated polyethers provided some relief but are far from ideal. With each new fluid proposed to solve one problem, other problems have arisen. Much of the work performed at the National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) in elucidating the mechanisms by which chemical degradation of space oils occur has been done by vibrational micro-spectroscopic techniques such as infrared and Raman, which this review details. Presented are fundamental lubrication studies as well as actual case studies in which vibrational spectroscopy has led to millions of dollars in savings and potentially prevented loss of mission.

Proximity operations considerations affecting spacecraft design

NASA Technical Reports Server (NTRS)

Staas, Steven K.

1991-01-01

Proximity operations can be defined as the maneuvering of two or more spacecraft within 1 nautical mile range, with relative velocity less than 10 feet per second. The passive vehicle is nontranslating and should provide for maintenance of the desired approach attitude. It must accommodate the active (translating) vehicle induced structural loads and performance characteristics (mating hardware tolerances), and support sensor compatibility (transponder, visual targets, etc.). The active vehicle must provide adequate sensor systems (relative state information, field-of-view, redundancy), flight control hardware (thruster sizing, minimal cross-coupling, performance margins, redundancy) and software (reconfigurable, attitude/rate modes, translation and rotation fine control authority) characteristic, and adequate non-propulsive consumables such as power. Operational concerns must be considered. These include the following: (1) the desired approach trajectory and relative orientation; (2) the active vehicle thruster plume effects (forces, torques, contamination) on the passive vehicle; and (3) procedures for contingencies such as loss of communications, sensor or propulsion failures, and target vehicle loss of control.

Effective Assistive Technology Consideration and Implications for Diverse Students

ERIC Educational Resources Information Center

Jones, Vita L.; Hinesmon-Matthews, Lezlee J.

2014-01-01

Often the consideration of assistive technology devices and services during the individualized education program (IEP) process is overlooked. Because the Individuals with Disabilities Education Act (IDEA) authorized this consideration, IEP team members must be keenly aware of the importance they hold in providing this valuable input. Thus, IEP…

How do aggregated patient-reported outcome measures data stimulate health care improvement? A realist synthesis

PubMed Central

Dalkin, Sonia; Gibbons, Elizabeth; Wright, Judy; Valderas, Jose Maria; Meads, David; Black, Nick

2017-01-01

Objectives Internationally, there has been considerable debate about the role of data in supporting quality improvement in health care. Our objective was to understand how, why and in what circumstances the feedback of aggregated patient-reported outcome measures data improved patient care. Methods We conducted a realist synthesis. We identified three main programme theories underlying the use of patient-reported outcome measures as a quality improvement strategy and expressed them as nine ‘if then’ propositions. We identified international evidence to test these propositions through searches of electronic databases and citation tracking, and supplemented our synthesis with evidence from similar forms of performance data. We synthesized this evidence through comparing the mechanisms and impact of patient-reported outcome measures and other performance data on quality improvement in different contexts. Results Three programme theories were identified: supporting patient choice, improving accountability and enabling providers to compare their performance with others. Relevant contextual factors were extent of public disclosure, use of financial incentives, perceived credibility of the data and the practicality of the results. Available evidence suggests that patients or their agents rarely use any published performance data when selecting a provider. The perceived motivation behind public reporting is an important determinant of how providers respond. When clinicians perceived that performance indicators were not credible but were incentivized to collect them, gaming or manipulation of data occurred. Outcome data do not provide information on the cause of poor care: providers needed to integrate and interpret patient-reported outcome measures and other outcome data in the context of other data. Lack of timeliness of performance data constrains their impact. Conclusions Although there is only limited research evidence to support some widely held theories of how aggregated patient-reported outcome measures data stimulate quality improvement, several lessons emerge from interventions sharing the same programme theories to help guide the increasing use of these measures. PMID:29260592

Improvements and important considerations for the 5-choice serial reaction time task-An effective measurement of visual attention in rats.

PubMed

Bhandari, Jayant; Daya, Ritesh; Mishra, Ram K

2016-09-01

The 5-choice serial reaction time task (5-CSRTT) is an automated operant conditioning task that measures rodent attention. The task allows the measurement of several parameters such as response accuracy, speed of processing, motivation, and impulsivity. The task has been widely used to investigate attentional processes in rodents for attention deficit and hyperactivity disorder and has expanded to other illnesses such as Alzheimer's disease, depression, and schizophrenia. The 5-CSRTT is accompanied with two significant caveats: a time intensive training period and largely varied individual rat capability to learn and perform the task. Here we provide a regimented acquisition protocol to enhance training for the 5-CSRTT and discuss important considerations for researchers using the 5-CSRTT. We offer guidelines to ensure that inferences on performance in the 5-CSRTT are in fact a result of experimental manipulation rather than training differences, or individual animal capability. According to our findings only rats that have been trained successfully within a limited time frame should be used for the remainder of the study. Currently the 5-CSRTT employs a training period of variable duration and procedure, and its inferences on attention must overcome heterogeneous innate animal differences. The 5-CSRTT offers valuable and valid insights on various rodent attentional processes and their translation to the underpinnings of illnesses such as schizophrenia. The recommendations made here provide important criteria to ensure inferences made from this task are in fact relevant to the attentional processes being measured. Copyright © 2016 Elsevier B.V. All rights reserved.

Effects of green and black tea consumption on brain wave activities in healthy volunteers as measured by a simplified Electroencephalogram (EEG): A feasibility study.

PubMed

Okello, Edward J; Abadi, Awatf M; Abadi, Saad A

2016-06-01

Tea has been associated with many mental benefits, such as attention enhancement, clarity of mind, and relaxation. These psychosomatic states can be measured in terms of brain activity using an electroencephalogram (EEG). Brain activity can be assessed either during a state of passive activity or when performing attention tasks and it can provide useful information about the brain's state. This study investigated the effects of green and black consumption on brain activity as measured by a simplified EEG, during passive activity. Eight healthy volunteers participated in the study. The EEG measurements were performed using a two channel EEG brain mapping instrument - HeadCoach™. Fast Fourier transform algorithm and EEGLAB toolbox using the Matlab software were used for data processing and analysis. Alpha, theta, and beta wave activities were all found to increase after 1 hour of green and black tea consumption, albeit, with very considerable inter-individual variations. Our findings provide further evidence for the putative beneficial effects of tea. The highly significant increase in theta waves (P < 0.004) between 30 minutes and 1 hour post-consumption of green tea may be an indication of its putative role in cognitive function, specifically alertness and attention. There were considerable inter-individual variations in response to the two teas which may be due genetic polymorphisms in metabolism and/or influence of variety/blend, dose and content of the selected products whose chemistry and therefore efficacy will have been influenced by 'from field to shelf practices'.

Structural considerations for solar installers : an approach for small, simplified solar installations or retrofits.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richards, Elizabeth H.; Schindel, Kay; Bosiljevac, Tom

2011-12-01

Structural Considerations for Solar Installers provides a comprehensive outline of structural considerations associated with simplified solar installations and recommends a set of best practices installers can follow when assessing such considerations. Information in the manual comes from engineering and solar experts as well as case studies. The objectives of the manual are to ensure safety and structural durability for rooftop solar installations and to potentially accelerate the permitting process by identifying and remedying structural issues prior to installation. The purpose of this document is to provide tools and guidelines for installers to help ensure that residential photovoltaic (PV) power systemsmore » are properly specified and installed with respect to the continuing structural integrity of the building.« less

Solar array study for solar electric propulsion spacecraft for the Encke rendezvous mission

NASA Technical Reports Server (NTRS)

Sequeira, E. A.; Patterson, R. E.

1974-01-01

The work is described which was performed on the design, analysis and performance of a 20 kW rollup solar array capable of meeting the design requirements of a solar electric spacecraft for the 1980 Encke rendezvous mission. To meet the high power requirements of the proposed electric propulsion mission, solar arrays on the order of 186.6 sq m were defined. Because of the large weights involved with arrays of this size, consideration of array configurations is limited to lightweight, large area concepts with maximum power-to-weight ratios. Items covered include solar array requirements and constraints, array concept selection and rationale, structural and electrical design considerations, and reliability considerations.

28 CFR 70.44 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... Consideration must be given to such matters as contractor integrity, record of past performance, financial and... performed or performance required, including the range of acceptable characteristics or minimum acceptable...

43 CFR 12.944 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... Consideration shall be given to such matters as contractor integrity, record of past performance, financial and... performed or performance required, including the range of acceptable characteristics or minimum acceptable...

S.S.T.O. performance assessment with in-flight lox collection

NASA Astrophysics Data System (ADS)

Vandenkerckhove, J.; Czysz, P.

1995-10-01

Much attention has recently been given, up to harware development to in-flight oxygen collection as a means to improve considerably the performance of both TSTO & SSTO vehicles. A first assessment suggests that it permits simultaneously to improve much both gross take-off weight (by more than 30%) & dry weight (by more than 15%) of an SSTO and to lower significantly the Mach number of transition scramjet → rocket, from 15 down below 10, thereby reducing dramatically the programmatic development risks. After having compared in-flight lox collection with other SSTO concepts, this paper provides a tentative assessment of the performance of SSTO vehicles taking advantage of it, in particular their sensitivity to changes in system characteristics such as transition Mach number, vehicle slenderness (i.e. Küchemann's parameter τ) or planform loading at take-off and in collection characteristics, in particular collection ratio & specific collection plant weight.

Structural Polymer-Based Carbon Nanotube Composite Fibers: Understanding the Processing–Structure–Performance Relationship

PubMed Central

Song, Kenan; Zhang, Yiying; Meng, Jiangsha; Green, Emily C.; Tajaddod, Navid; Li, Heng; Minus, Marilyn L.

2013-01-01

Among the many potential applications of carbon nanotubes (CNT), its usage to strengthen polymers has been paid considerable attention due to the exceptional stiffness, excellent strength, and the low density of CNT. This has provided numerous opportunities for the invention of new material systems for applications requiring high strength and high modulus. Precise control over processing factors, including preserving intact CNT structure, uniform dispersion of CNT within the polymer matrix, effective filler–matrix interfacial interactions, and alignment/orientation of polymer chains/CNT, contribute to the composite fibers’ superior properties. For this reason, fabrication methods play an important role in determining the composite fibers’ microstructure and ultimate mechanical behavior. The current state-of-the-art polymer/CNT high-performance composite fibers, especially in regards to processing–structure–performance, are reviewed in this contribution. Future needs for material by design approaches for processing these nano-composite systems are also discussed. PMID:28809290

In-pile test results of U-silicide or U-nitride coated U-7Mo particle dispersion fuel in Al

NASA Astrophysics Data System (ADS)

Kim, Yeon Soo; Park, J. M.; Lee, K. H.; Yoo, B. O.; Ryu, H. J.; Ye, B.

2014-11-01

U-silicide or U-nitride coated U-Mo particle dispersion fuel in Al (U-Mo/Al) was in-pile tested to examine the effectiveness of the coating as a diffusion barrier between the U-7Mo fuel kernels and Al matrix. This paper reports the PIE data and analyses focusing on the effectiveness of the coating in terms of interaction layer (IL) growth and general fuel performance. The U-silicide coating showed considerable success, but it also provided evidence for additional improvement for coating process. The U-nitride coated specimen showed largely inefficient results in reducing IL growth. From the test, important observations were also made that can be utilized to improve U-Mo/Al fuel performance. The heating process for coating turned out to be beneficial to suppress fuel swelling. The use of larger fuel particles confirmed favorable effects on fuel performance.

Challenges and solutions to pre- and post-randomization subgroup analyses.

PubMed

Desai, Manisha; Pieper, Karen S; Mahaffey, Ken

2014-01-01

Subgroup analyses are commonly performed in the clinical trial setting with the purpose of illustrating that the treatment effect was consistent across different patient characteristics or identifying characteristics that should be targeted for treatment. There are statistical issues involved in performing subgroup analyses, however. These have been given considerable attention in the literature for analyses where subgroups are defined by a pre-randomization feature. Although subgroup analyses are often performed with subgroups defined by a post-randomization feature--including analyses that estimate the treatment effect among compliers--discussion of these analyses has been neglected in the clinical literature. Such analyses pose a high risk of presenting biased descriptions of treatment effects. We summarize the challenges of doing all types of subgroup analyses described in the literature. In particular, we emphasize issues with post-randomization subgroup analyses. Finally, we provide guidelines on how to proceed across the spectrum of subgroup analyses.

Investigation of automated task learning, decomposition and scheduling

NASA Technical Reports Server (NTRS)

Livingston, David L.; Serpen, Gursel; Masti, Chandrashekar L.

1990-01-01

The details and results of research conducted in the application of neural networks to task planning and decomposition are presented. Task planning and decomposition are operations that humans perform in a reasonably efficient manner. Without the use of good heuristics and usually much human interaction, automatic planners and decomposers generally do not perform well due to the intractable nature of the problems under consideration. The human-like performance of neural networks has shown promise for generating acceptable solutions to intractable problems such as planning and decomposition. This was the primary reasoning behind attempting the study. The basis for the work is the use of state machines to model tasks. State machine models provide a useful means for examining the structure of tasks since many formal techniques have been developed for their analysis and synthesis. It is the approach to integrate the strong algebraic foundations of state machines with the heretofore trial-and-error approach to neural network synthesis.

How To Make the Most of Your Human: Design Considerations for Single Pilot Operations

NASA Technical Reports Server (NTRS)

Schutte, Paul C.

2015-01-01

Reconsidering the function allocation between automation and the pilot in the flight deck is the next step in improving aviation safety. The current allocation, based on who does what best, makes poor use of the pilot's resources and abilities. In some cases it may actually handicap pilots from performing their role. Improving pilot performance first lies in defining the role of the pilot - why a human is needed in the first place. The next step is allocating functions based on the needs of that role (rather than fitness), then using automation to target specific human weaknesses in performing that role. Examples are provided (some of which could be implemented in conventional cockpits now). Along the way, the definition of human error and the idea that eliminating/automating the pilot will reduce instances of human error will be challenged.

Operation of a single-channel, sequential Navstar GPS receiver in a helicopter mission environment

NASA Technical Reports Server (NTRS)

Edwards, F. G.; Hamlin, J. R.

1984-01-01

It is pointed out that the future utilization of the Navstar Global Positioning System (GPS) by civil helicopters will provide an enhanced performance not obtainable with current navigations systems. GPS will supply properly equipped users with extremely accurate three-dimensional position and velocity information anywhere in the world. Preliminary studies have been conducted to investigate differential GPS concept mechanizations and cost, and to theoretically predict navigation performance and the impact of degradation of the GPS C/A code for national security considerations. The obtained results are encouraging, but certain improvements are needed. As a second step in the program, a single-channel sequential GPS navigator was installed and operated in the NASA SH-3G helicopter. A series of flight tests were conducted. It is found that performance of the Navstar GPS Z-set is quite acceptable to support area navigation and nonprecision approach operations.

Toward Automated Cochlear Implant Fitting Procedures Based on Event-Related Potentials.

PubMed

Finke, Mareike; Billinger, Martin; Büchner, Andreas

Cochlear implants (CIs) restore hearing to the profoundly deaf by direct electrical stimulation of the auditory nerve. To provide an optimal electrical stimulation pattern the CI must be individually fitted to each CI user. To date, CI fitting is primarily based on subjective feedback from the user. However, not all CI users are able to provide such feedback, for example, small children. This study explores the possibility of using the electroencephalogram (EEG) to objectively determine if CI users are able to hear differences in tones presented to them, which has potential applications in CI fitting or closed loop systems. Deviant and standard stimuli were presented to 12 CI users in an active auditory oddball paradigm. The EEG was recorded in two sessions and classification of the EEG data was performed with shrinkage linear discriminant analysis. Also, the impact of CI artifact removal on classification performance and the possibility to reuse a trained classifier in future sessions were evaluated. Overall, classification performance was above chance level for all participants although performance varied considerably between participants. Also, artifacts were successfully removed from the EEG without impairing classification performance. Finally, reuse of the classifier causes only a small loss in classification performance. Our data provide first evidence that EEG can be automatically classified on single-trial basis in CI users. Despite the slightly poorer classification performance over sessions, classifier and CI artifact correction appear stable over successive sessions. Thus, classifier and artifact correction weights can be reused without repeating the set-up procedure in every session, which makes the technique easier applicable. With our present data, we can show successful classification of event-related cortical potential patterns in CI users. In the future, this has the potential to objectify and automate parts of CI fitting procedures.

Survey of Information Sharing Related to the Occupational Considerations of Working Cancer Patients Between Occupational Physicians and Treating Physicians.

PubMed

Furuya, Yuko; Takahashi, Miyako; Tateishi, Seiichiro; Tomita, Makiko; Hiraoka, Kou; Shibata, Yoshiyuki; Mori, Koji

2016-06-07

Although a vital element in providing career support to workers with medical ailments is coordination between the worker, the treating physician, and the company (the occupational health staff), little is known about factors that promote or impede coordination between these parties. This study aims to demonstrate what kinds of actions by treating physicians promote or impede the occupational considerations made by occupational physicians. A total of 43 occupational physicians who had completed the postgraduate training course (4 years) at the University of Occupational and Environmental Health Japan and were current or former instructors at the Occupational Health Training Center were surveyed using a self-reported questionnaire form. The questionnaire asked about individual attributes (age, years of experience as an occupational physician, etc.) and actions taken by treating physicians that were useful in making occupational considerations in the workplace (good practice cases) or that impeded such considerations (trouble cases). Responses about cases were obtained as freely written descriptions. Case content was analyzed qualitatively according to the KJ method. During the survey period from December 17, 2013 to January 18, 2014, responses were received from 33 occupational physicians (valid response rate, 76.7%; mean age, 37.4±6.1 years). Of these, 60.6% exclusively specialized in occupational medicine. Respondents provided 32 good practice cases and 16 trouble cases. The timing of coordination was the period of rehabilitation in 35 of the 48 cases (72.9%). Actions by the treating physicians that influenced occupational considerations were divided into seven major categories: "providing treatment information," "providing physical information," "appropriateness of rehabilitation or occupational considerations," "consistency of information provided," "issuing documentation," "communication that was cognizant of the occupational physician's presence," and "providing information unknown to the worker." This study clarified the kind of actions by the treating physicians that were relevant to occupational support provided by occupational physicians. Additionally, this study clarified the need for information sharing with occupational physician and treating physician. The good practice cases and trouble cases presented by the respondents were inextricably linked, and actions by the treating physicians that are based on good practices are highly likely to lead to smooth information sharing and occupational considerations.

Parentage Reconstruction in Eucalyptus nitens Using SNPs and Microsatellite Markers: A Comparative Analysis of Marker Data Power and Robustness.

PubMed

Telfer, Emily J; Stovold, Grahame T; Li, Yongjun; Silva-Junior, Orzenil B; Grattapaglia, Dario G; Dungey, Heidi S

2015-01-01

Pedigree reconstruction using molecular markers enables efficient management of inbreeding in open-pollinated breeding strategies, replacing expensive and time-consuming controlled pollination. This is particularly useful in preferentially outcrossed, insect pollinated Eucalypts known to suffer considerable inbreeding depression from related matings. A single nucleotide polymorphism (SNP) marker panel consisting of 106 markers was selected for pedigree reconstruction from the recently developed high-density Eucalyptus Infinium SNP chip (EuCHIP60K). The performance of this SNP panel for pedigree reconstruction in open-pollinated progenies of two Eucalyptus nitens seed orchards was compared with that of two microsatellite panels with 13 and 16 markers respectively. The SNP marker panel out-performed one of the microsatellite panels in the resolution power to reconstruct pedigrees and out-performed both panels with respect to data quality. Parentage of all but one offspring in each clonal seed orchard was correctly matched to the expected seed parent using the SNP marker panel, whereas parentage assignment to less than a third of the expected seed parents were supported using the 13-microsatellite panel. The 16-microsatellite panel supported all but one of the recorded seed parents, one better than the SNP panel, although there was still a considerable level of missing and inconsistent data. SNP marker data was considerably superior to microsatellite data in accuracy, reproducibility and robustness. Although microsatellites and SNPs data provide equivalent resolution for pedigree reconstruction, microsatellite analysis requires more time and experience to deal with the uncertainties of allele calling and faces challenges for data transferability across labs and over time. While microsatellite analysis will continue to be useful for some breeding tasks due to the high information content, existing infrastructure and low operating costs, the multi-species SNP resource available with the EuCHIP60k, opens a whole new array of opportunities for high-throughput, genome-wide or targeted genotyping in species of Eucalyptus.

Transsphenoidal surgery for pituitary tumours

PubMed Central

Massoud, A; Powell, M; Williams, R; Hindmarsh, P; Brook, C

1997-01-01

Accepted 29 January 1997
 OBJECTIVES—Transsphenoidal surgery (TSS) is the preferred method for the excision of pituitary microadenomas in adults. This study was carried out to establish the long term efficacy and safety of TSS in children.
STUDY DESIGN—A 14 year retrospective analysis was carried out on 23 children (16 boys and seven girls), all less than 18 years of age, who had undergone TSS at our centre.
RESULTS—Twenty nine transsphenoidal surgical procedures were carried out. The most common diagnosis was an adrenocorticotrophic hormone (ACTH) secreting adenoma (14 (61%) patients). The median length of follow up was 8.0 years (range 0.3-14.0 years). Eighteen (78%) patients were cured after the first procedure. No death was related to the operation. The most common postoperative complication was diabetes insipidus, which was transient in most patients. Other complications were headaches in two patients and cerebrospinal fluid leaks in two patients. De novo endocrine deficiencies after TSS in children were as follows: three (14%) patients developed panhypopituitarism, eight (73%) developed growth hormone insufficiency, three (14%) developed secondary hypothyroidism, and four (21%) developed gonadotrophin deficiency. Permanent ACTH deficiency occurred in five (24%) patients, though all patients received postoperative glucocorticoid treatment until dynamic pituitary tests were performed three months after TSS.
CONCLUSIONS—TSS in children is a safe and effective treatment for pituitary tumours, provided it is performed by surgeons with considerable experience and expertise. Surgical complications are minimal. Postoperative endocrine deficit is considerable, but is only permanent in a small proportion of patients.

 • Transsphenoidal surgery is a safe and effective treatment for pituitary tumours in children • Transsphenoidal surgery should be performed by surgeons with considerable experience and expertise • Surgical complications of transsphenoidal surgery are minimal and endocrine deficit is permanent in only a small proportion of patients PMID:9196353

A systematic review of advance practice providers in acute care: options for a new model in a burn intensive care unit.

PubMed

Edkins, Renee E; Cairns, Bruce A; Hultman, C Scott

2014-03-01

Accreditation Council for Graduate Medical Education mandated work-hour restrictions have negatively impacted many areas of clinical care, including management of burn patients, who require intensive monitoring, resuscitation, and procedural interventions. As surgery residents become less available to meet service needs, new models integrating advanced practice providers (APPs) into the burn team must emerge. We performed a systematic review of APPs in critical care questioning, how best to use all providers to solve these workforce challenges? We performed a systematic review of PubMed, CINAHL, Ovid, and Google Scholar, from 2002 to 2012, using the key words: nurse practitioner, physician assistant, critical care, and burn care. After applying inclusion/exclusion criteria, 18 relevant articles were selected for review. In addition, throughput and financial models were developed to examine provider staffing patterns. Advanced practice providers in critical care settings function in various models, both with and without residents, reporting to either an intensivist or an attending physician. When APPs participated, patient outcomes were similar or improved compared across provider models. Several studies reported considerable cost-savings due to decrease length of stay, decreased ventilator days, and fewer urinary tract infections when nurse practitioners were included in the provider mix. Restrictions in resident work-hours and changing health care environments require that new provider models be created for acute burn care. This article reviews current utilization of APPs in critical care units and proposes a new provider model for burn centers.

Pitting and Bending Fatigue Evaluations of a New Case-Carburized Gear Steel

NASA Technical Reports Server (NTRS)

Krantz, Timothy; Tufts, Brian

2007-01-01

The power density of a gearbox is an important consideration for many applications and is especially important for gearboxes used on aircraft. One approach to improving power density of gearing is to improve the steel properties by design of the alloy. The alloy tested in this work was designed to be case-carburized with surface hardness of Rockwell C66 after hardening. Test gear performance was evaluated using surface fatigue tests and single-tooth bending fatigue tests. The performance of gears made from the new alloy was compared to the performance of gears made from two alloys currently used for aviation gearing. The new alloy exhibited significantly better performance in surface fatigue testing, demonstrating the value of the improved properties in the case layer. However, the alloy exhibited lesser performance in single-tooth bending fatigue testing. The fracture toughness of the tested gears was insufficient for use in aircraft applications as judged by the behavior exhibited during the single tooth bending tests. This study quantified the performance of the new alloy and has provided guidance for the design and development of next generation gear steels.

49 CFR 19.44 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... Consideration shall be given to such matters as contractor integrity, record of past performance, financial and..., whenever practicable, of technical requirements in terms of functions to be performed or performance...

22 CFR 518.44 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... Consideration shall be given to such matters as contractor integrity, record of past performance, financial and..., whenever practicable, of technical requirements in terms or functions to be performed or performance...

Reactive molecular dynamics simulation on the disintegration of Kapton, POSS polyimide, amorphous silica, and teflon during atomic oxygen impact using the ReaxFF reactive force-field method.

PubMed

Rahnamoun, A; van Duin, A C T

2014-04-17

Atomic oxygen (AO) is the most abundant element in the low Earth orbit (LEO). It is the result of the dissociation of molecular oxygen by ultraviolet radiation from the sun. In the LEO, it collides with the materials used on spacecraft surfaces and causes degradation of these materials. The degradation of the materials on the surface of spacecrafts at LEO has been a significant problem for a long time. Kapton polyimide, polyhedral oligomeric silsesquioxane (POSS), silica, and Teflon are the materials extensively used in spacecraft industry, and like many other materials used in spacecraft industry, AO collision degradation is an important issue in their applications on spacecrafts. To investigate the surface chemistry of these materials in exposure to space AO, a computational chemical evaluation of the Kapton polyimide, POSS, amorphous silica, and Teflon was performed in separate simulations under similar conditions. For performing these simulations, the ReaxFF reactive force-field program was used, which provides the computational speed required to perform molecular dynamics (MD) simulations on system sizes sufficiently large to describe the full chemistry of the reactions. Using these simulations, the effects of AO impact on different materials and the role of impact energies, the content of material, and temperature of material on the behavior of the materials are studied. The ReaxFF results indicate that Kapton is less resistant than Teflon toward AO damage. These results are in good agreement with experiment. These simulations indicate that the amorphous silica shows the highest stability among these materials before the start of the highly exothermic silicon oxidation. We have verified that adding silicon to the bulk of the Kapton structure enhances the stability of the Kapton against AO impact. Our canonical MD simulations demonstrate that an increase in the heat transfer in materials during AO impact can provide a considerable decrease in the disintegration of the material. This effect is especially relevant in silica AO collision. Considerable experimental efforts have been undertaken to minimize such AO-based degradations. As our simulations demonstrate, ReaxFF can provide a cost-effective screening tool for future material optimization.

Providing for consideration of the bill (H.R. 4800) making appropriations for Agriculture, Rural Development, Food and Drug Administration, and Related Agencies programs for the fiscal year ending September 30, 2015, and for other purposes; providing for consideration of the bill (H.R. 4457) to amend the Internal Revenue Code of 1986 to permanently extend increased expensing limitations, and for other purposes; and providing for consideration of the bill (H.R. 4453) to amend the Internal Revenue Code of 1986 to make permanent the reduced recognition period for built-in gains of S corporations.

THOMAS, 113th Congress

Rep. Burgess, Michael C. [R-TX-26

2014-06-10

House - 06/11/2014 On agreeing to the resolution Agreed to by recorded vote: 227 - 189 (Roll no. 299). (All Actions) Tracker: This bill has the status Agreed to in HouseHere are the steps for Status of Legislation:

Performance of coded MFSK in a Rician fading channel. [Multiple Frequency Shift Keyed modulation

NASA Technical Reports Server (NTRS)

Modestino, J. W.; Mui, S. Y.

1975-01-01

The performance of convolutional codes in conjunction with noncoherent multiple frequency shift-keyed (MFSK) modulation and Viterbi maximum likelihood decoding on a Rician fading channel is examined in detail. While the primary motivation underlying this work has been concerned with system performance on the planetary entry channel, it is expected that the results are of considerably wider interest. Particular attention is given to modeling the channel in terms of a few meaningful parameters which can be correlated closely with the results of theoretical propagation studies. Fairly general upper bounds on bit error probability performance in the presence of fading are derived and compared with simulation results using both unquantized and quantized receiver outputs. The effects of receiver quantization and channel memory are investigated and it is concluded that the coded noncoherent MFSK system offers an attractive alternative to coherent BPSK in providing reliable low data rate communications in fading channels typical of planetary entry missions.

Towards systemic sustainable performance of TBI care systems: emergency leadership frontiers.

PubMed

Caro, Denis H J

2010-11-10

Traumatic brain injuries (TBIs) continue as a twenty-first century subterranean and almost invisible scourge internationally. TBI care systems provide a safety net for survival, recovery, and reintegration into social communities from this scourge, particularly in Canada, the European Union, and the USA. This paper examines the underlying issues of systemic performance and sustainability of TBI care systems, in the light of decreasing care resources and increasing demands for services. This paper reviews the extant literature on TBI care systems, systems reengineering, and emergency leadership literature. This paper presents a seven care layer paradigm, which forms the essence of systemic performance in the care of patients with TBIs. It also identifies five key strategic drivers that hold promise for the future systemic sustainability of TBI care systems. Transformational leadership and engagement from the international emergency medical community is the key to generating positive change. The sustainability/performance care framework is relevant and pertinent for consideration internationally and in the context of other emergency medical populations.

An Informative Interpretation of Decision Theory: The Information Theoretic Basis for Signal-to-Noise Ratio and Log Likelihood Ratio

DOE PAGES

Polcari, J.

2013-08-16

The signal processing concept of signal-to-noise ratio (SNR), in its role as a performance measure, is recast within the more general context of information theory, leading to a series of useful insights. Establishing generalized SNR (GSNR) as a rigorous information theoretic measure inherent in any set of observations significantly strengthens its quantitative performance pedigree while simultaneously providing a specific definition under general conditions. This directly leads to consideration of the log likelihood ratio (LLR): first, as the simplest possible information-preserving transformation (i.e., signal processing algorithm) and subsequently, as an absolute, comparable measure of information for any specific observation exemplar. Furthermore,more » the information accounting methodology that results permits practical use of both GSNR and LLR as diagnostic scalar performance measurements, directly comparable across alternative system/algorithm designs, applicable at any tap point within any processing string, in a form that is also comparable with the inherent performance bounds due to information conservation.« less

Towards systemic sustainable performance of TBI care systems: emergency leadership frontiers

PubMed Central

2010-01-01

Background Traumatic brain injuries (TBIs) continue as a twenty-first century subterranean and almost invisible scourge internationally. TBI care systems provide a safety net for survival, recovery, and reintegration into social communities from this scourge, particularly in Canada, the European Union, and the USA. Aims This paper examines the underlying issues of systemic performance and sustainability of TBI care systems, in the light of decreasing care resources and increasing demands for services. Methods This paper reviews the extant literature on TBI care systems, systems reengineering, and emergency leadership literature. Results This paper presents a seven care layer paradigm, which forms the essence of systemic performance in the care of patients with TBIs. It also identifies five key strategic drivers that hold promise for the future systemic sustainability of TBI care systems. Conclusions Transformational leadership and engagement from the international emergency medical community is the key to generating positive change. The sustainability/performance care framework is relevant and pertinent for consideration internationally and in the context of other emergency medical populations. PMID:21373305

Performance of silvered Teflon thermal control blankets on spacecraft

NASA Astrophysics Data System (ADS)

Pippin, G.; Stuckey, W. K.; Hemminger, C. S.

1993-03-01

Silver-backed fluorinated ethylene propylene Teflon (Ag/FEP) thin film material was used for thermal control in many locations on the Long Duration Exposure Facility (LDEF). The Ag/FEP registered the effects of atomic oxygen, solar ultraviolet radiation, meteoroid and debris impacts, thermal cycling, and contamination. This report summarizes the post-flight condition of the Ag/FEP, compares the results with performance on other spacecraft, and presents lifetime estimates for use under a variety of environmental exposures. Measurements of optical property and mechanical property and surface chemistry changes with exposure conditions, and their significance for design considerations and expected performance lifetimes, are reported for material flown on LDEF. The LDEF based data provides detailed information performance of Ag/FEP under relatively long term exposure in low Earth orbit. Comparison of this data with results from short term shuttle flights, Solar Max, SCATHA, other satellites, and ground based measurements is made to present a comprehensive summary of the use of this material for spacecraft applications.

Design considerations of high-performance InGaAs/InP single-photon avalanche diodes for quantum key distribution.

PubMed

Ma, Jian; Bai, Bing; Wang, Liu-Jun; Tong, Cun-Zhu; Jin, Ge; Zhang, Jun; Pan, Jian-Wei

2016-09-20

InGaAs/InP single-photon avalanche diodes (SPADs) are widely used in practical applications requiring near-infrared photon counting such as quantum key distribution (QKD). Photon detection efficiency and dark count rate are the intrinsic parameters of InGaAs/InP SPADs, due to the fact that their performances cannot be improved using different quenching electronics given the same operation conditions. After modeling these parameters and developing a simulation platform for InGaAs/InP SPADs, we investigate the semiconductor structure design and optimization. The parameters of photon detection efficiency and dark count rate highly depend on the variables of absorption layer thickness, multiplication layer thickness, excess bias voltage, and temperature. By evaluating the decoy-state QKD performance, the variables for SPAD design and operation can be globally optimized. Such optimization from the perspective of specific applications can provide an effective approach to design high-performance InGaAs/InP SPADs.

34 CFR 607.23 - What special funding consideration does the Secretary provide?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What special funding consideration does the Secretary... Does the Secretary Make an Award? § 607.23 What special funding consideration does the Secretary... for library materials per full-time equivalent enrolled student which is less than the average...

77 FR 74196 - Draft Guidance for Industry on Safety Considerations for Product Design To Minimize Medication...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

... document, which addresses safety achieved through drug product design, is the first in a series of planned...] Draft Guidance for Industry on Safety Considerations for Product Design To Minimize Medication Errors... Considerations for Product Design to Minimize Medication Errors.'' The draft guidance provides sponsors of...

Application of Preventative Legal Considerations to the Alumni Affairs Administrator.

ERIC Educational Resources Information Center

Miles, Albert S.; Miller, Michael T.

Colleges and universities increasingly rely on fund raising activities as a major source of operating revenue, a process which is wrought with legal pitfalls. This document provides an overview of the legal considerations of fund raising for the alumni and development officer, focusing particularly on span of control considerations between alumni…

Using in vitro/in silico data for consumer safety assessment of feed flavoring additives--A feasibility study using piperine.

PubMed

Thiel, A; Etheve, S; Fabian, E; Leeman, W R; Plautz, J R

2015-10-01

Consumer health risk assessment for feed additives is based on the estimated human exposure to the additive that may occur in livestock edible tissues compared to its hazard. We present an approach using alternative methods for consumer health risk assessment. The aim was to use the fewest possible number of animals to estimate its hazard and human exposure without jeopardizing the safety upon use. As an example we selected the feed flavoring substance piperine and applied in silico modeling for residue estimation, results from literature surveys, and Read-Across to assess metabolism in different species. Results were compared to experimental in vitro metabolism data in rat and chicken, and to quantitative analysis of residues' levels from the in vivo situation in livestock. In silico residue modeling showed to be a worst case: the modeled residual levels were considerably higher than the measured residual levels. The in vitro evaluation of livestock versus rodent metabolism revealed no major differences in metabolism between the species. We successfully performed a consumer health risk assessment without performing additional animal experiments. As shown, the use and combination of different alternative methods supports animal welfare consideration and provides future perspective to reducing the number of animals. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Sustainable business models: systematic approach toward successful ambulatory care pharmacy practice.

PubMed

Sachdev, Gloria

2014-08-15

This article discusses considerations for making ambulatory care pharmacist services at least cost neutral and, ideally, generate a margin that allows for service expansion. The four pillars of business sustainability are leadership, staffing, information technology, and compensation. A key facet of leadership in ambulatory care pharmacy practice is creating and expressing a clear vision for pharmacists' services. Staffing considerations include establishing training needs, maximizing efficiencies, and minimizing costs. Information technology is essential for efficiency in patient care delivery and outcomes assessment. The three domains of compensation are cost savings, pay for performance, and revenue generation. The following eight steps for designing and implementing an ambulatory care pharmacist service are discussed: (1) prepare a needs assessment, (2) analyze existing strengths, weaknesses, opportunities, and threats, (3) analyze service gaps and feasibility, (4) consider financial opportunities, (5) consider stakeholders' interests, (6) develop a business plan, (7) implement the service, and (8) measure outcomes. Potential future changes in national healthcare policy (such as pharmacist provider status and expanded pay for performance) could enhance the opportunities for sustainable ambulatory care pharmacy practice. The key challenges facing ambulatory care pharmacists are developing sustainable business models, determining which services yield a positive return on investment, and demanding payment for value-added services. Copyright © 2014 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Long‐term follow‐up of children treated for cancer: why is it necessary, by whom, where and how?

PubMed Central

Skinner, Roderick; Wallace, W Hamish B; Levitt, Gillian

2007-01-01

About 1 in 715 young adults is a survivor of childhood malignancy, but these individuals are at increased risk of considerable treatment‐related morbidity or even mortality. A recent study suggests that at least 60% have one or more chronic health problems, whilst about 20% have three or more. The principle goal of long‐term follow‐up (LTFU) of survivors is to decrease the severity of late treatment complications by performing appropriate surveillance to detect incipient toxicity, and by facilitating timely diagnosis and management of emerging or established late adverse effects. The content of LTFU is dictated by the type and amount of treatment for the malignancy, and has been defined in recent clinical guidelines. Moreover, LTFU allows provision of survivor education, psychosocial support and health promotion advice. However, considerable variation exists in how LTFU is performed, with several alternative models involving a range of professionals in a variety of locations, depending on numerous clinical and organisational factors. There is increasing utilisation of multidisciplinary teams, and recognition of the importance of effective transition strategies whereby care is transferred to more age‐appropriate providers, usually after a period of joint care in adolescence. It is of paramount importance to ascertain and meet the needs of survivors themselves. PMID:17337686

Practicalities and Research Considerations for Conducting Childhood Obesity Prevention Interventions with Families

PubMed Central

Morgan, Philip J.; Jones, Rachel A.; Collins, Clare E.; Hesketh, Kylie D.; Young, Myles D.; Burrows, Tracy L.; Magarey, Anthea M.; Brown, Helen L.; Hinkley, Trina; Perry, Rebecca A.; Brennan, Leah; Spence, Alison C.; Campbell, Karen J.

2016-01-01

Internationally, childhood obesity is a major public health concern. Given the established difficulties in treating obesity, designing and evaluating effective obesity prevention interventions are research priorities. As parents play a crucial role in establishing positive health behaviours in children, they are a key target for child obesity prevention programs. However, recruiting and engaging parents in such interventions can be a considerable challenge for researchers and practitioners. Members of the ‘Parenting, Child Behaviour and Well-being’ stream of the Australasian Child and Adolescent Obesity Research Network (ACAORN) have considerable and varied expertise in conducting such interventions and can provide insights into addressing these challenges. This paper aims to highlight considerations regarding the design, implementation, and evaluation of obesity prevention interventions with families and provide practical insights and recommendations for researchers and practitioners conducting family-based research in this area. Case studies of three family-based interventions conducted by ACAORN members are highlighted to provide examples and contextualise the recommendations proposed. PMID:27834820

Development of combinatorial chemistry methods for coatings: high-throughput adhesion evaluation and scale-up of combinatorial leads.

PubMed

Potyrailo, Radislav A; Chisholm, Bret J; Morris, William G; Cawse, James N; Flanagan, William P; Hassib, Lamyaa; Molaison, Chris A; Ezbiansky, Karin; Medford, George; Reitz, Hariklia

2003-01-01

Coupling of combinatorial chemistry methods with high-throughput (HT) performance testing and measurements of resulting properties has provided a powerful set of tools for the 10-fold accelerated discovery of new high-performance coating materials for automotive applications. Our approach replaces labor-intensive steps with automated systems for evaluation of adhesion of 8 x 6 arrays of coating elements that are discretely deposited on a single 9 x 12 cm plastic substrate. Performance of coatings is evaluated with respect to their resistance to adhesion loss, because this parameter is one of the primary considerations in end-use automotive applications. Our HT adhesion evaluation provides previously unavailable capabilities of high speed and reproducibility of testing by using a robotic automation, an expanded range of types of tested coatings by using the coating tagging strategy, and an improved quantitation by using high signal-to-noise automatic imaging. Upon testing, the coatings undergo changes that are impossible to quantitatively predict using existing knowledge. Using our HT methodology, we have developed several coatings leads. These HT screening results for the best coating compositions have been validated on the traditional scales of coating formulation and adhesion loss testing. These validation results have confirmed the superb performance of combinatorially developed coatings over conventional coatings on the traditional scale.

Review of Modelling Techniques for In Vivo Muscle Force Estimation in the Lower Extremities during Strength Training

PubMed Central

Schellenberg, Florian; Oberhofer, Katja; Taylor, William R.

2015-01-01

Background. Knowledge of the musculoskeletal loading conditions during strength training is essential for performance monitoring, injury prevention, rehabilitation, and training design. However, measuring muscle forces during exercise performance as a primary determinant of training efficacy and safety has remained challenging. Methods. In this paper we review existing computational techniques to determine muscle forces in the lower limbs during strength exercises in vivo and discuss their potential for uptake into sports training and rehabilitation. Results. Muscle forces during exercise performance have almost exclusively been analysed using so-called forward dynamics simulations, inverse dynamics techniques, or alternative methods. Musculoskeletal models based on forward dynamics analyses have led to considerable new insights into muscular coordination, strength, and power during dynamic ballistic movement activities, resulting in, for example, improved techniques for optimal performance of the squat jump, while quasi-static inverse dynamics optimisation and EMG-driven modelling have helped to provide an understanding of low-speed exercises. Conclusion. The present review introduces the different computational techniques and outlines their advantages and disadvantages for the informed usage by nonexperts. With sufficient validation and widespread application, muscle force calculations during strength exercises in vivo are expected to provide biomechanically based evidence for clinicians and therapists to evaluate and improve training guidelines. PMID:26417378

Nutritional armor for the warfighter: can omega-3 fatty acids enhance stress resilience, wellness, and military performance?

PubMed

Deuster, Patricia

2014-11-01

This panel discussion, moderated by Dr. Deuster, illustrates the thinking of selected military leaders on the approach that must be taken to ensure the relationship between nutrition and performance. Insights and challenges these leaders face are provided, with consideration of the complex issues relating to sufficient scientific evidence, timing for Department of Defense policy, and the unique needs of service members. The discussion resulted in several recommendations. First, more nutritionists in uniform should be placed in/on the battlefield on every base and camp in Afghanistan and Iraq. Second, nutritionists/dietitians need to be working in the preventive arena, using the health promotion model and marketing to help shift behavior. Third, contract dietitians should be hired to work primarily in tertiary care. Dietitians must forward-deploy to implement preventive medicine and human performance optimization as it relates to nutrition and dietary supplementation. Unfortunately, almost all military dietitians are constrained within the medical model and we think of them just as "hospital providers." Finally, line units need to decide that dietitians are a requisite part of their force structure. Putting many dieticians in line units will allow our active duty members to believe diet and nutrition are important for performance. Reprint & Copyright © 2014 Association of Military Surgeons of the U.S.

Review of Modelling Techniques for In Vivo Muscle Force Estimation in the Lower Extremities during Strength Training.

PubMed

Schellenberg, Florian; Oberhofer, Katja; Taylor, William R; Lorenzetti, Silvio

2015-01-01

Knowledge of the musculoskeletal loading conditions during strength training is essential for performance monitoring, injury prevention, rehabilitation, and training design. However, measuring muscle forces during exercise performance as a primary determinant of training efficacy and safety has remained challenging. In this paper we review existing computational techniques to determine muscle forces in the lower limbs during strength exercises in vivo and discuss their potential for uptake into sports training and rehabilitation. Muscle forces during exercise performance have almost exclusively been analysed using so-called forward dynamics simulations, inverse dynamics techniques, or alternative methods. Musculoskeletal models based on forward dynamics analyses have led to considerable new insights into muscular coordination, strength, and power during dynamic ballistic movement activities, resulting in, for example, improved techniques for optimal performance of the squat jump, while quasi-static inverse dynamics optimisation and EMG-driven modelling have helped to provide an understanding of low-speed exercises. The present review introduces the different computational techniques and outlines their advantages and disadvantages for the informed usage by nonexperts. With sufficient validation and widespread application, muscle force calculations during strength exercises in vivo are expected to provide biomechanically based evidence for clinicians and therapists to evaluate and improve training guidelines.

Assessment of bone health in children with disabilities.

PubMed

Kecskemethy, Heidi H; Harcke, H Theodore

2014-01-01

Evaluating the bone health of children with disabilities is challenging and requires consideration of many factors in clinical decision-making. Feeding problems and growth deficits, immobility/inability to bear weight, effect of medications, and the nature of his or her disease can all directly affect a child's overall picture of bone health. Familiarity with the tools available to assess bone health is important for practitioners. The most commonly used method to assess bone density, dual energy x-ray absorptiometry, can be performed effectively when one appreciates the techniques that make scanning patients with disabilities possible. There are specific techniques that are especially useful for measuring bone density in children with disabilities; standard body sites are not always obtainable. Consideration of clinical condition and treatment must be considered when interpreting dual energy x-ray absorptiometry scans. Serial measurements have been shown to be effective in monitoring change in bone content and in providing information on which to base decisions regarding medical treatment.

EANM 2012 guidelines for radionuclide imaging of phaeochromocytoma and paraganglioma

PubMed Central

Timmers, Henri J.; Hindié, Elif; Guillet, Benjamin A.; Neumann, Hartmut P.; Walz, Martin K.; Opocher, Giuseppe; de Herder, Wouter W.; Boedeker, Carsten C.; de Krijger, Ronald R.; Chiti, Arturo; Al-Nahhas, Adil; Pacak, Karel

2016-01-01

Purpose Radionuclide imaging of phaeochromocytomas (PCCs) and paragangliomas (PGLs) involves various functional imaging techniques and approaches for accurate diagnosis, staging and tumour characterization. The purpose of the present guidelines is to assist nuclear medicine practitioners in performing, interpreting and reporting the results of the currently available SPECT and PET imaging approaches. These guidelines are intended to present information specifically adapted to European practice. Methods Guidelines from related fields, issued by the European Association of Nuclear Medicine and the Society of Nuclear Medicine, were taken into consideration and are partially integrated within this text. The same was applied to the relevant literature, and the final result was discussed with leading experts involved in the management of patients with PCC/PGL. The information provided should be viewed in the context of local conditions, laws and regulations. Conclusion Although several radionuclide imaging modalities are considered herein, considerable focus is given to PET imaging which offers high sensitivity targeted molecular imaging approaches. PMID:22926712

Advanced Fusion Reactors for Space Propulsion and Power Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chapman, John J.

In recent years the methodology proposed for conversion of light elements into energy via fusion has made steady progress. Scientific studies and engineering efforts in advanced fusion systems designs have introduced some new concepts with unique aspects including consideration of Aneutronic fuels. The plant parameters for harnessing aneutronic fusion appear more exigent than those required for the conventional fusion fuel cycle. However aneutronic fusion propulsion plants for Space deployment will ultimately offer the possibility of enhanced performance from nuclear gain as compared to existing ionic engines as well as providing a clean solution to Planetary Protection considerations and requirements. Protonmore » triggered 11Boron fuel (p- 11B) will produce abundant ion kinetic energy for In-Space vectored thrust. Thus energetic alpha particles' exhaust momentum can be used directly to produce high Isp thrust and also offer possibility of power conversion into electricity. p-11B is an advanced fusion plant fuel with well understood reaction kinematics but will require some new conceptual thinking as to the most effective implementation.« less

Survey of core medical trainees in the United Kingdom 2013 - inconsistencies in training experience and competing with service demands.

PubMed

Tasker, Fiona; Newbery, Nina; Burr, Bill; Goddard, Andrew F

2014-04-01

There is currently considerable concern about the attractiveness of hospital medicine as a career and experiences in core medical training (CMT) are a key determinant of whether trainees continue in the medical specialties. Little is understood about the quality and impact of the current CMT programme and this survey was designed to assess this. Three key themes emerged. Firstly, the demands of providing service have led to considerable loss of training opportunities, particularly in outpatients and formal teaching sessions. Trainees spend a lot of this service time doing menial tasks and over 90% report that service takes up 80-100% of their time. Secondly, clinical and educational supervision is variable, with trainees sometimes getting little consultant feedback on their clinical performance. Finally, 44% of trainees report that CMT has not prepared them to be a medical registrar and many trainees are put off acute medical specialties by their experiences in CMT.

What "price" means when buying food: insights from a multisite qualitative study with Black Americans.

PubMed

DiSantis, Katherine Isselmann; Grier, Sonya A; Odoms-Young, Angela; Baskin, Monica L; Carter-Edwards, Lori; Young, Deborah Rohm; Lassiter, Vikki; Kumanyika, Shiriki K

2013-03-01

We explored the role of price in the food purchasing patterns of Black adults and youths. We analyzed qualitative data from interviews and focus groups with socioeconomically diverse, primarily female, Black adults or parents (n = 75) and youths (n = 42) in 4 US cities. Interview protocols were locality specific, but all were designed to elicit broad discussion of food marketing variables. We performed a conventional qualitative content analysis by coding and analyzing data from each site to identify common salient themes. Price emerged as a primary influence on food purchases across all sites. Other value considerations (e.g., convenience, food quality, healthfulness of product, and family preferences) were discussed, providing a more complex picture of how participants considered the price of a product. Food pricing strategies that encourage consumption of healthful foods may have high relevance for Black persons across income or education levels. Accounting for how price intersects with other value considerations may improve the effectiveness of these strategies.

Advanced Fusion Reactors for Space Propulsion and Power Systems

NASA Technical Reports Server (NTRS)

Chapman, John J.

2011-01-01

In recent years the methodology proposed for conversion of light elements into energy via fusion has made steady progress. Scientific studies and engineering efforts in advanced fusion systems designs have introduced some new concepts with unique aspects including consideration of Aneutronic fuels. The plant parameters for harnessing aneutronic fusion appear more exigent than those required for the conventional fusion fuel cycle. However aneutronic fusion propulsion plants for Space deployment will ultimately offer the possibility of enhanced performance from nuclear gain as compared to existing ionic engines as well as providing a clean solution to Planetary Protection considerations and requirements. Proton triggered 11Boron fuel (p- 11B) will produce abundant ion kinetic energy for In-Space vectored thrust. Thus energetic alpha particles "exhaust" momentum can be used directly to produce high ISP thrust and also offer possibility of power conversion into electricity. p- 11B is an advanced fusion plant fuel with well understood reaction kinematics but will require some new conceptual thinking as to the most effective implementation.

A cryogenic infrared calibration target.

PubMed

Wollack, E J; Kinzer, R E; Rinehart, S A

2014-04-01

A compact cryogenic calibration target is presented that has a peak diffuse reflectance, R ⩽ 0.003, from 800 to 4800 cm(-1) (12 - 2 μm). Upon expanding the spectral range under consideration to 400-10,000 cm(-1) (25 - 1 μm) the observed performance gracefully degrades to R ⩽ 0.02 at the band edges. In the implementation described, a high-thermal-conductivity metallic substrate is textured with a pyramidal tiling and subsequently coated with a thin lossy dielectric coating that enables high absorption and thermal uniformity across the target. The resulting target assembly is lightweight, has a low-geometric profile, and has survived repeated thermal cycling from room temperature to ∼4 K. Basic design considerations, governing equations, and test data for realizing the structure described are provided. The optical properties of selected absorptive materials-Acktar Fractal Black, Aeroglaze Z306, and Stycast 2850 FT epoxy loaded with stainless steel powder-are characterized and presented.

Life prediction technologies for aeronautical propulsion systems

NASA Technical Reports Server (NTRS)

Mcgaw, Michael A.

1987-01-01

Fatigue and fracture problems continue to occur in aeronautical gas turbine engines. Components whose useful life is limited by these failure modes include turbine hot-section blades, vanes and disks. Safety considerations dictate that catastrophic failures be avoided, while economic considerations dictate that noncatastrophic failures occur as infrequently as possible. The design decision is therefore in making the tradeoff between engine performance and durability. The NASA Lewis Research Center has contributed to the aeropropulsion industry in the areas of life prediction technology for 30 years, developing creep and fatigue life prediction methodologies for hot-section materials. Emphasis is placed on the development of methods capable of handling both thermal and mechanical fatigue under severe environments. Recent accomplishments include the development of more accurate creep-fatigue life prediction methods such as the total strain version of Lewis' Strainrange Partitioning (SRP) and the HOST-developed Cyclic Damage Accumulation (CDA) model. Other examples include the Double Damage Curve Approach (DDCA), which provides greatly improved accuracy for cumulative fatigue design rules.

Is carpal tunnel syndrome an occupational disease? A review.

PubMed

Zyluk, Andrzej

2013-05-27

In many countries, including Poland, carpal tunnel syndrome is considered to be a disease of possible occupational etiology. This review presents information about work-related risk-factors which comprise the use of handheld vibrating machinery, forceful gripping of objects with hands, repetitive and frequent manual tasks and forced postures of the wrist (flexion/extension). However, the character of the job is only one of possible several factors leading to the development of the disease, as its etiology is multifactorial. Conditions to be taken into consideration when recognizing a case as occupational carpal tunnel syndrome were shown to include: coexistence of predisposing diseases (diabetes), constitutional factors (obesity), character, level and duration of the exposure to harmful stimuli during the workday as well as total duration of work upon exposure. Consideration of these circumstances provides adequate ground for recognizing a particular case as occupational. Nonetheless, even accepting the disease as occupational should be temporary, as surgical carpal tunnel release is an effective method of treatment and should allow the patient to return to previously performed work.

Endoscopic endonasal transsphenoidal surgery: implementation of an operative and perioperative checklist.

PubMed

Christian, Eisha; Harris, Brianna; Wrobel, Bozena; Zada, Gabriel

2014-01-01

Endoscopic endonasal surgery relies heavily on specialized operative instrumentation and optimization of endocrinological and other critical adjunctive intraoperative factors. Several studies and worldwide initiatives have previously established that intraoperative and perioperative surgical checklists can minimize the incidence of and prevent adverse events. The aim of this article was to outline some of the most common considerations in the perioperative and intraoperative preparation for endoscopic endonasal transsphenoidal surgery. The authors implemented and prospectively evaluated a customized checklist at their institution in 25 endoscopic endonasal operations for a variety of sellar and skull base pathological entities. Although no major errors were detected, near misses pertaining primarily to missing components of surgical equipment or instruments were identified in 9 cases (36%). The considerations in the checklist provided in this article can serve as a basic template for further customization by centers performing endoscopic endonasal surgery, where their application may reduce the incidence of adverse or preventable errors associated with surgical treatment of sellar and skull base lesions.

Development of a large scale bipolar NiH2 battery

NASA Technical Reports Server (NTRS)

Adler, E.; Perez, F.

1983-01-01

The bipolar battery concept, developed in cooperation with NASA, is described in the context of the advantages afforded by near-term IPV and CVP cell technology. The projected performance, development requirements, and a possible approach to bipolar battery design are outlined. Consideration is given to packaging electrodes within a common hydrophobic plastic frame, electrode technology that involves a photochemically etched 0.1 mm thick nickel substrate coated with a 10 mg/sq cm mixture of platinum powder and TFE30, and an electrode design that eliminates the screen and doubles the electrode thickness (from the currently used 0.8 mm) while retaining the active material loading of 1.6-1.8 gm/cu cm. Also covered are thermal management, and electrolyte and oxygen management. It is concluded that a high voltage, high capacity, bipolar NiH2 cell can be configured with proper development for use in large power systems, and that it can provide considerable weight savings.

Genetic Causes of Recurrent Pregnancy Loss.

PubMed

Page, Jessica M; Silver, Robert M

2016-09-01

Pregnancy loss is one of the most common obstetric complications, affecting over 30% of conceptions. A considerable proportion of losses are due to genetic abnormalities. Indeed, over 50% of early pregnancy losses have been associated with chromosomal abnormalities. Most are due to de novo nondisjunctional events but balanced parental translocations are responsible for a small but important percentage of genetic abnormalities in couples with recurrent pregnancy loss. In the past, assessment of genetic abnormalities was limited to karyotype performed on placental or fetal tissue. However, advances in molecular genetic technology now provide rich genetic information about additional genetic causes of and risk factors for pregnancy loss. In addition, the use of preimplantation genetic testing in couples undergoing in vitro fertilization has the potential to decrease the risk of pregnancy loss from genetic abnormalities. To date, efficacy is uncertain but considerable potential remains. This chapter will review what is known about genetic causes of recurrent pregnancy loss with a focus on novel causes and potential treatments. Remaining knowledge gaps will be highlighted.