Science.gov

Sample records for proyecto encuna parte

  1. Proyecto "LLAMA"

    NASA Astrophysics Data System (ADS)

    Arnal, E. M.; Mirabel, I. F.; Morras, R.; Romero, G. E.; Abraham, Z.; de Gouveira Dal Pino, E. M.; Lepine, J.

    In this paper we briefly describe a joint scientific and technological effort between Argentina and Brazil, whose first goal is to install and run, in the northwestern part of Argentina, a millimetre and submillimetre observa- tional facility. In the long run, we would like to incorporate this dish to existing ones (ALMA, APEX, ASTE) in the northern extreme of Chile, to be able to carry out, for the first time in Latinamerican soil, very long base- line interferometry at mm/submm wavelengths. We also succintly mention a long term campaign that is under way in order to monitor the transparency of the atmosphere at those wavelengths. The science that can be accom- plished with this instrument, the technology transfer spin-offs related to this project, and the scientific and strategic importance of this project within both the Argentinean and Latinamerican radioastronomy is described. FULL TEXT IN SPANISH

  2. El proyecto AUGER

    NASA Astrophysics Data System (ADS)

    Etchegoyen, A.

    Hace ya más de 30 años en Volcano Ranch, EE.UU., un extenso chubasco cósmico (ECC) fue detectado con energía en exceso de 1020 eV. Desde entonces, observatorios ubicados en Haverah Park del Reino Unido, Yakutsk de Rusia, AGASA de Japón y Dugway de EE.UU. también han observado ECC con energías mayores que 1020 eV. Poco se sabe de dichos rayos, y en particular cuál es la naturaleza del primario, de dónde provienen, y cómo son acelerados, pero su naturaleza ultrarelativista excluye la mayoría de las respuestas dejando sólo algunas plausibles de ser investigadas experimentalmente. Grupos de científicos de 20 países están trabajando con el fin de construir dos arreglos de detectores gigantes, uno en cada hemisferio a lo largo de 3000 km2 c/u. Dichas dimensiones son necesarias debido al flujo estimado de 1 rayo cósmico/centuria/km2/sr. La sede del Observatorio del Sur es la Argentina. El proyecto fue nombrado Pierre Auger en conmemoración del célebre físico francés que detectó por primera vez chubascos cósmicos en 1938. El proyecto focaliza su interés en rayos cósmicos con energías mayores que 1020 eV.

  3. Proyecto Leer Bulletin Number 6.

    ERIC Educational Resources Information Center

    Tome, Martha V., Ed.

    This annotated, cumulative bibliography, developed by the Proyecto Leer Program, of more than 600 selected works in Spanish focuses on works which meet the following criteria: (1) reading difficulty does not exceed 10th grade level, and (2) selections are suitable for a Spanish-American community. Books for children are listed separately from…

  4. "Proyecto Sherezade": Teaching Spanish Literature Interactively.

    ERIC Educational Resources Information Center

    Fernandez, Enrique

    2001-01-01

    Describes "Proyecto Sherezade," an Internet-based project publicly available to anyone. Founded in 1996 by a group of Spanish language and literature academics in Canada and the United States, the project began as an Internet literary magazine that published non-established writers's short stories in Spanish and commentaries sent by readers.…

  5. Proyecto Aurora: Building a Community of Women.

    ERIC Educational Resources Information Center

    Noya, Gladys R. Capella

    1997-01-01

    Describes the development of Proyecto Aurora, a program to develop and implement educational, support, and research programs to benefit low-income women in Puerto Rico. Portraits of some clients illustrate the rewards and challenges of working with this community and furthering their educational experiences and opportunities. (SLD)

  6. Content Analysis Schedule for Bilingual Education Programs: Proyecto PAL.

    ERIC Educational Resources Information Center

    Gonzalez, Castor

    This content analysis schedule for "Proyecto PAL" in San Jose, California, presents information on the history, funding, and scope of the project. Included are sociolinguistic process variables such as the native and dominant languages of students and their interaction. Information is provided on staff selection and the linguistic background of…

  7. El aprendizaje significativo en las ciencias al participar en proyectos de investigacion cientifica

    NASA Astrophysics Data System (ADS)

    Mora Polanco, Miguelena

    La ciencia es el eje fundamental a traves del cual se desarrollan las habilidades necesarias para el pensar cientifico que va a la busqueda del conocimiento cientifico. La intencion de este estudio fue indagar en el tema de investigacion cientifica desde el punto de vista de los participantes en los siguientes aspectos relacionados con la experiencia de investigacion cientifica: a) conceptos, b) proceso, c) destrezas y d) disposicion. Tambien se analizaron: a) las perspectivas del metodo cientifico, b) la estrategia de ensenanza, c) la cultura cientifica y d) la exposicion del proyecto investigativo en la Feria Cientifica; como parte del aprendizaje significativo de la ciencias de los participantes. Esta investigacion cualitativa propuso como diseno el estudio de caso. Los aspectos relacionados a la experiencia de participar en proyecto de investigacion cientifica son el fenomeno o caso bajo estudio. En el estudio participaron cinco (5) estudiantes egresados de escuela publica o privada que cursaban hasta el tercer ano de estudios universitarios, conducentes a un bachillerato en educacion secundaria en ciencias o en ciencias naturales. Las tecnicas utilizadas para recopilar los datos fueron: analisis de documentos del DEPR, revision de artefactos y entrevistas profundas. Para el analisis de los datos de las entrevistas se utilizo el modelo de Wolcott (1994). Del analisis de documentos del DEPR se identificaron areas a mejorar en las guias de las cartas circulares con relacion a la investigacion escolar y la feria cientifica. El analisis de los artefactos proveyo evidencia de como los internados, simposios e investigaciones fomentan el que los estudiantes se superen en el aspecto cognitivo, se conviertan en creadores del conocimiento, al hacer suyo los conceptos para poder explicarlos al publico. De las entrevistas los participantes manifestaron que la experiencia de investigacion fue una de aprendizaje significativo que los marco para toda la vida y les expandio su

  8. James Monroe High School Proyecto Nuevos Horizontes, 1986-1987. OEA Evaluation Report.

    ERIC Educational Resources Information Center

    Martinez, Ana L.; And Others

    In its second year of Title VII funding, James Monroe High Schools's Proyecto Nuevos Horizontes (Project New Horizons) served 344 limited-English-speaking recent arrivals from Latin America and the Caribbean, in grades 9 through 12. The program has built on the strengths of the high school's extensive computer-assisted instruction (CAI) program,…

  9. James Monroe High School Proyecto Nuevos Horizontes, 1985-1986. OEA Evaluation Report.

    ERIC Educational Resources Information Center

    New York City Board of Education, Brooklyn. Office of Educational Assessment.

    Proyecto Nuevos Horizontes, a 3-year Title VII-funded bilingual education program, serves 287 Spanish speaking students at James Monroe High School (Bronx, New York). This report evaluates the project's first year of operation, 1985-86. The report contains an introduction describing the school and project goals; information on student…

  10. El Metodo Llamado Proyecto (The Project Approach). ERIC Digest.

    ERIC Educational Resources Information Center

    Katz, Lilian G.

    A project is an in-depth investigation of a topic worth learning more about, usually undertaken by a group of children within a class. The goal of a project is to learn more about a topic rather than to find answers to questions posed by a teacher. Project work is complementary to the systematic parts of a curriculum. Whereas systematic…

  11. Proyecto Bilingüe: Constructing a Figured World of Bilingual Education for Latina/o Bilingual Teachers

    ERIC Educational Resources Information Center

    Ek, Lucila D.; Chávez, Guadalupe Domínguez

    2015-01-01

    Using theories of figured worlds, we demonstrate how Proyecto Bilingüe, a Master of Arts in Curriculum and Instruction program, constructs a figured world of bilingual education for Latina/o bilingual teachers. We drew from a larger qualitative study to conduct a thematic analysis of interviews with Latina/o bilingual teachers, their written…

  12. Proyecto para la medición sistemática de seeing en CASLEO

    NASA Astrophysics Data System (ADS)

    Fernández Lajus, E.; Forte, J. C.

    La calidad del seeing astronómico es ciertamente uno de los parámetros mas importantes que caracterizan el sitio de un observatorio. Por tanto se desea determinar si el alto valor de seeing observado con el telescopio de 2.15 m se debe a efectos internos y/o del entorno a la cupula o si se debe simplemente al seeing propio del lugar. El actual mecanismo de refrigeración del espejo primario del 2.15, parece haber mejorado notablemente la calidad del seeing. Sin embargo se hace necesario saber hasta que punto el valor del seeing puede ser mejorado. La primera etapa del proyecto consistió en la puesta a punto del telescopio emplazado para este propósito y la adquisición de las primeras medidas tentativas de seeing.

  13. Foreign-Born Latinos Living in Rural Areas are more likely to Experience Health Care Discrimination: Results from Proyecto de Salud para Latinos.

    PubMed

    López-Cevallos, Daniel F; Harvey, S Marie

    2016-08-01

    Health care discrimination is increasingly considered a significant barrier to accessing health services among minority populations, including Latinos. However, little is known about the role of immigration status. The purpose of this study was to examine the association between immigration status and perceived health care discrimination among Latinos living in rural areas. Interviews were conducted among 349 young-adult Latinos (ages 18 to 25) living in rural Oregon, as part of Proyecto de Salud para Latinos. Over a third of participants experienced health care discrimination (39.5 %). Discrimination was higher among foreign-born (44.9 %) rather than US-born Latinos (31.9 %). Multivariate results showed that foreign-born Latinos were significantly more likely to experience health care discrimination, even after controlling for other relevant factors (OR = 2.10, 95 % CI 1.16-3.82). This study provides evidence that health care discrimination is prevalent among young-adult Latinos living in rural areas, particularly the foreign-born. Effective approaches towards reducing discrimination in health care settings should take into consideration the need to reform our broken immigration system.

  14. El rol de Ia colaboracion y el Modelo de Aprendizaje Basado en Proyectos (ABPr) mediante el lente de la Teoria de Actividad (CHAT): un estudio de caso con estudiantes de 9no grado

    NASA Astrophysics Data System (ADS)

    Delgado, Isabel C.

    Los modelos de eensenanza y aprendizaje constructivistas conceptualizan el aprendizaje como un proceso activo. El modelo de Aprendizaje Basado en Proyectos (ABPr) se distingue por una serie de componentes, entre los cuales se destaca el aspecto colaborativo y cooperativo como un reto al momento de su implantacion. Son pocas las investigaciones que se concentran en este aspecto del modelo. En este estudio, se analizaron las diversas interacciones que surgen durante la implantacion de una unidad curricular sobre el tema de Geologia de Puerto Rico, la cual se diseno con el modelo ABPr cuyo enfoque es orientacion a proyectos. Particularmente, se examinaron las interacciones sociales que surgen entre los pares y entre pares y docente durante el proceso de planificacion y desarrollo de los productos finales, al igual que las interacciones entre los estudiantes y el material didactico en estas etapas del modelo. La investigacion es de tipo cualitativo e incorpora como diseno el estudio de caso. Las diversas interacciones constituyen la unidad de analisis. En el estudio participaron 19 estudiantes de 9no grado, a quienes se organizaron en 5 grupos colaborativos por temas de interes (Pangea, Placas tectonicas, Volcanes, Tsunamis y Terremotos). Las tecnicas que se utilizaron para recopilar los datos fueron: observaciones participativas, grupos focales y analisis de documentos (cuadernos reflexivos y respuestas de los estudiantes a la pregunta central del proyecto). Para el analisis de los datos se aplico la teoria de actividad (CHAT) que concentra la unidad de analisis en la actividad humana en un contexto particular. Los resultados del estudio senalan que las interacciones entre pares, entre pares y docente, asi como entre estudiantes y material didactico son fundamentales en el proceso de aprendizaje. Una mayor interaccion entre pares durante las etapas de planificar y desarrollar los productos finales de la unidad, promueve una mejor comprension de los conceptos de la

  15. Adapting an empirically supported intervention for a new population and setting: findings and lessons learned from Proyecto Puentes.

    PubMed

    Chapman, Mimi V; Hall, William J; Sisler, Laurel A G

    2014-01-01

    With an increasing emphasis on evidence-based practice, the need for social work researchers and practitioners to adapt empirically supported interventions for new populations and cultures is essential. However, social work suffers from a lack of guidance and detailed examples of intervention adaptations that may not proceed "by the book" and actually falter but recover. Many of these situations result from lack of attention to setting and context even when researchers believe they have full stakeholder buy-in. This article presents process evaluation findings from an intervention adaptation called Proyecto Puentes that allowed for self-correction and successful intervention development.

  16. Adapting an empirically supported intervention for a new population and setting: findings and lessons learned from Proyecto Puentes.

    PubMed

    Chapman, Mimi V; Hall, William J; Sisler, Laurel A G

    2014-01-01

    With an increasing emphasis on evidence-based practice, the need for social work researchers and practitioners to adapt empirically supported interventions for new populations and cultures is essential. However, social work suffers from a lack of guidance and detailed examples of intervention adaptations that may not proceed "by the book" and actually falter but recover. Many of these situations result from lack of attention to setting and context even when researchers believe they have full stakeholder buy-in. This article presents process evaluation findings from an intervention adaptation called Proyecto Puentes that allowed for self-correction and successful intervention development. PMID:24405130

  17. Motorcycle Parts

    NASA Technical Reports Server (NTRS)

    1993-01-01

    An article in NASA Tech Briefs describing a vacuum bagging process for forming composite parts helped a small Oklahoma Company to improve its manufacturing process. President of Performance Extremes, Larry Ortega, and his partners make motorcycle parts from carbon/epoxy to reduce weight. Using vacuum bags, parts have a better surface and fewer voids inside. When heat used in the vacuum bag process caused deformation upon cooling, a solution found in another tech brief solved the problem. A metal plate inside the vacuum bag made for more even heat transfer. A third article described a simple procedure for repairing loose connector pins, which the company has also utilized.

  18. Coronal partings

    NASA Astrophysics Data System (ADS)

    Nikulin, Igor F.; Dumin, Yurii V.

    2016-02-01

    The basic observational properties of "coronal partings"-the special type of quasi-one-dimensional magnetic structures, identified by a comparison of the coronal X-ray and EUV images with solar magnetograms-are investigated. They represent the channels of opposite polarity inside the unipolar large-scale magnetic fields, formed by the rows of magnetic arcs directed to the neighboring sources of the background polarity. The most important characteristics of the partings are discussed. It can be naturally assumed that-from the evolutionary and spatial points of view-the partings can transform into the coronal holes and visa versa. The classes of global, intersecting, and complex partings are identified.

  19. rAvis: an R-package for downloading information stored in Proyecto AVIS, a citizen science bird project.

    PubMed

    Varela, Sara; González-Hernández, Javier; Casabella, Eduardo; Barrientos, Rafael

    2014-01-01

    Citizen science projects store an enormous amount of information about species distribution, diversity and characteristics. Researchers are now beginning to make use of this rich collection of data. However, access to these databases is not always straightforward. Apart from the largest and international projects, citizen science repositories often lack specific Application Programming Interfaces (APIs) to connect them to the scientific environments. Thus, it is necessary to develop simple routines to allow researchers to take advantage of the information collected by smaller citizen science projects, for instance, programming specific packages to connect them to popular scientific environments (like R). Here, we present rAvis, an R-package to connect R-users with Proyecto AVIS (http://proyectoavis.com), a Spanish citizen science project with more than 82,000 bird observation records. We develop several functions to explore the database, to plot the geographic distribution of the species occurrences, and to generate personal queries to the database about species occurrences (number of individuals, distribution, etc.) and birdwatcher observations (number of species recorded by each collaborator, UTMs visited, etc.). This new R-package will allow scientists to access this database and to exploit the information generated by Spanish birdwatchers over the last 40 years. PMID:24626233

  20. El Proyecto Gémini: informe actualizado y técnica de observación

    NASA Astrophysics Data System (ADS)

    Sahade, J.; Lapasset, E.; Levato, H.

    Se describirá la situación actual en lo que se refiere al desarrollo del Proyecto Gémini en cuanto a su estructura, faz constructiva y programación general. Se informará sobre los planes a desarrollar en el tiempo de verificación científica y puesta a punto del instrumental, a partir de la primera imagen que se obtenga con el telescopio Gemini Norte. Se presentará, además, el plan operativo para observar con los telescopios Gemini tal cual está concebido hasta la fecha, describiéndose el proceso desde el mismo momento en que un investigador decide presentar una propuesta para observar con uno de los telescopios, hasta el archivo y derechos de propiedad sobre los datos. Se decribe también el ``soft" denominado Observing Tool (OT) que es clave en la planificación científica de Gemini y que puede ser utilizado ``off-line" en cualquier PC con un entorno windows.

  1. rAvis: an R-package for downloading information stored in Proyecto AVIS, a citizen science bird project.

    PubMed

    Varela, Sara; González-Hernández, Javier; Casabella, Eduardo; Barrientos, Rafael

    2014-01-01

    Citizen science projects store an enormous amount of information about species distribution, diversity and characteristics. Researchers are now beginning to make use of this rich collection of data. However, access to these databases is not always straightforward. Apart from the largest and international projects, citizen science repositories often lack specific Application Programming Interfaces (APIs) to connect them to the scientific environments. Thus, it is necessary to develop simple routines to allow researchers to take advantage of the information collected by smaller citizen science projects, for instance, programming specific packages to connect them to popular scientific environments (like R). Here, we present rAvis, an R-package to connect R-users with Proyecto AVIS (http://proyectoavis.com), a Spanish citizen science project with more than 82,000 bird observation records. We develop several functions to explore the database, to plot the geographic distribution of the species occurrences, and to generate personal queries to the database about species occurrences (number of individuals, distribution, etc.) and birdwatcher observations (number of species recorded by each collaborator, UTMs visited, etc.). This new R-package will allow scientists to access this database and to exploit the information generated by Spanish birdwatchers over the last 40 years.

  2. EL PROCESO DE MENTORÍA DENTRO DE UN PROYECTO PARA EL DESARROLLO DE INFRAESTRUCTURA DE INVESTIGACIÓN A NIVEL UNIVERSITARIO

    PubMed Central

    MÁRQUEZ, LILLIAN ARVELO; SANTIAGO, NILDA G. MEDINA

    2015-01-01

    This article aims to describe the experience of Proyecto VIAS - RIMI (Violence & Asthma - Research Infrastructure in Minority Institutions) of Universidad del Este in Puerto Rico to achieve one of its main objectives: the development and promotion of mentoring in research. It describes the way the project has operationalized the mentoring process to empower mentees, as well as the innovative ways in which university professors have received training to become better mentors. The authors argue that mentoring has been fundamental to achieve the goals of the students who have participated in the project and recommend continuing such initiatives in academia. PMID:27066161

  3. Steroids Update, Part 1 and Part 2.

    ERIC Educational Resources Information Center

    Miller, Calvin; Duda, Marty

    1986-01-01

    Part 1 of this two-part article describes the views of a physician who believes that athletes who want to take steroids are best protected by receiving a prescription and monitoring. Part 2 discusses the more general view of physicians that steroids should not be prescribed but perhaps should be monitored. (MT)

  4. Proyecto Costa Escondida: Interdisciplinary Research at the Ancient Maya Port Site of Vista Alegre, Quintana Roo, Mexico

    NASA Astrophysics Data System (ADS)

    Glover, J.; Rissolo, D.; Beddows, P. A.; Goodman, B.; Smith, D.

    2013-05-01

    At the northeast tip of the Yucatan Peninsula - where the Caribbean meets the Gulf - lies the ancient Maya port site of Vista Alegre. The inhabitants of this site, much like the people living nearby today, were forced to contend with the challenging coastal environment of Laguna Holbox. The sediment-rich, low gradient of the north coast presents a contrasting landscape compared to the Caribbean coast, where water resources are of much larger magnitude and evident in the extensive systems of cenotes (sinkholes) and underground rivers that supported pre-Columbian sites along this eastern rocky sediment-poor coastline. For past inhabitants the north coast was a mosaic of low-lying, non-arable zones where access to potable water was a challenge for inhabitants well into the 20th century. By bringing together scholars from the fields of archaeology, coastal ecology, geoarchaeology, and hydrogeology, the Proyecto Costa Escondida is focusing on the dynamic relationship between the Maya and their coastal landscape over the past 3000 years. To date we have collected 12 manual push-cores from the shallow waters surrounding Vista Alegre, which have been analyzed at 1 cm resolution using standard methods for Loss on Ignition (LOI), δ18Ocarb and δ13Ccarb of bulk carbonate, granulometry, micropalentology, and AMS radiocarbon dating. In addition to have baseline comparative data, we have conducted near-shore and terrestrial coastal ecological surveys along with the mapping of coastal water salinity and temperatures in the dry and wet seasons. Overall, the chemical proxies, lithology, and paleosalinity model reconstructed to date reveal four onlapping parasequences representing an overall transgression of the coastline with strong seasonality of water chemistry that has been changing under the control of rising sea levels over the past 3000 years. The sedimentation rate and timing of the transition to marine is in reasonable agreement with local sea level curves meaning that the

  5. Parts application handbook study

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The requirements for a NASA application handbook for standard electronic parts are determined and defined. This study concentrated on identifying in detail the type of information that designers and parts engineers need and expect in a parts application handbook for the effective application of standard parts on NASA projects.

  6. Guia para la Elaboracion y Evaluacion de Proyectos de Investigacion (Guidelines for Reporting and Evaluating Research Projects).

    ERIC Educational Resources Information Center

    Morles, Victor

    This article establishes guidelines for conducting and evaluating research projects according to a scientific methodology. The organizational format suggested here follows an outline with elements and details that should be considered in an investigation. Each part of the proposed outline is explained, and terms are defined. Project evaluation is…

  7. Microlabels For Auto Parts

    NASA Technical Reports Server (NTRS)

    Ash, John P.

    1993-01-01

    Proposed method of unique labeling and identification of automotive parts greatly simplifies recall campaigns and reduces effort and expense associated. Compressed symbols fully characterize each part by type and manufacturing history. Manufacturers notify only those owners whose cars need repairs or modifications. Similar compressed symbology developed for possible use on spacecraft.

  8. Dissecting Diversity Part II

    ERIC Educational Resources Information Center

    Matthews, Frank

    2005-01-01

    This article presents "Dissecting Diversity, Part II," the conclusion of a wide-ranging two-part roundtable discussion on diversity in higher education. The participants were as follows: Lezli Baskerville, J.D., President and CEO of the National Association for Equal Opportunity (NAFEO); Dr. Gerald E. Gipp, Executive Director of the American…

  9. NGC 2849 y NGC 6134: dos cúmulos abiertos más para el proyecto BOCCE

    NASA Astrophysics Data System (ADS)

    Ahumada, A. V.; Bragaglia, A.; Cignoni, M.; Donati, P.; Tosi, M.; Marconi, G.

    The "Bologna Open Cluster Chemical Evolution" (BOCCE) project is a photometric and spectroscopic survey of Galactic open clusters (OCs), to be used as tracers of the properties and evolution of the Galactic disk. The main OCs parameters are derived in a precise and homogeneous way, and they will be used, for example, to determine the metallicity distribution in the Galactic disk and how it has evolved with time. We present here part of our last effort, concerning the photometric data obtained for NGC 2849 and NGC 6134. FULL TEXT IN SPANISH

  10. Proyecto MercadoFRESCO: a multi-level, community-engaged corner store intervention in East Los Angeles and Boyle Heights.

    PubMed

    Ortega, Alexander N; Albert, Stephanie L; Sharif, Mienah Z; Langellier, Brent A; Garcia, Rosa Elena; Glik, Deborah C; Brookmeyer, Ron; Chan-Golston, Alec M; Friedlander, Scott; Prelip, Michael L

    2015-04-01

    Urban food swamps are typically situated in low-income, minority communities and contribute to overweight and obesity. Changing the food landscape in low income and underserved communities is one strategy to combat the negative health consequences associated with the lack of access to healthy food resources and an abundance of unhealthy food venues. In this paper, we describe Proyecto MercadoFRESCO (Fresh Market Project), a corner store intervention project in East Los Angeles and Boyle Heights in California that used a multi-level approach with a broad range of community, business, and academic partners. These are two neighboring, predominantly Latino communities that have high rates of overweight and obesity. Located in these two communities are approximately 150 corner stores. The project used a community-engaged approach to select, recruit, and convert four corner stores, so that they could become healthy community assets in order to improve residents' access to and awareness of fresh and affordable fruits and vegetables in their immediate neighborhoods. We describe the study framework for the multi-level intervention, which includes having multiple stakeholders, expertise in corner store operations, community and youth engagement strategies, and social marketing campaigns. We also describe the evaluation and survey methodology to determine community and patron impact of the intervention. This paper provides a framework useful to a variety of public health stakeholders for implementing a community-engaged corner store conversion, particularly in an urban food swamp. PMID:25209600

  11. Proyecto MercadoFRESCO: a multi-level, community-engaged corner store intervention in East Los Angeles and Boyle Heights.

    PubMed

    Ortega, Alexander N; Albert, Stephanie L; Sharif, Mienah Z; Langellier, Brent A; Garcia, Rosa Elena; Glik, Deborah C; Brookmeyer, Ron; Chan-Golston, Alec M; Friedlander, Scott; Prelip, Michael L

    2015-04-01

    Urban food swamps are typically situated in low-income, minority communities and contribute to overweight and obesity. Changing the food landscape in low income and underserved communities is one strategy to combat the negative health consequences associated with the lack of access to healthy food resources and an abundance of unhealthy food venues. In this paper, we describe Proyecto MercadoFRESCO (Fresh Market Project), a corner store intervention project in East Los Angeles and Boyle Heights in California that used a multi-level approach with a broad range of community, business, and academic partners. These are two neighboring, predominantly Latino communities that have high rates of overweight and obesity. Located in these two communities are approximately 150 corner stores. The project used a community-engaged approach to select, recruit, and convert four corner stores, so that they could become healthy community assets in order to improve residents' access to and awareness of fresh and affordable fruits and vegetables in their immediate neighborhoods. We describe the study framework for the multi-level intervention, which includes having multiple stakeholders, expertise in corner store operations, community and youth engagement strategies, and social marketing campaigns. We also describe the evaluation and survey methodology to determine community and patron impact of the intervention. This paper provides a framework useful to a variety of public health stakeholders for implementing a community-engaged corner store conversion, particularly in an urban food swamp.

  12. Proyecto MercadoFRESCO: A Multi-level, Community-Engaged Corner Store Intervention in East Los Angeles and Boyle Heights

    PubMed Central

    Albert, Stephanie L.; Sharif, Mienah Z.; Langellier, Brent A.; Garcia, Rosa Elena; Glik, Deborah C.; Brookmeyer, Ron; Chan-Golston, Alec M.; Friedlander, Scott; Prelip, Michael L.

    2014-01-01

    Urban food swamps are typically situated in low-income, minority communities and contribute to overweight and obesity. Changing the food landscape in low income and underserved communities is one strategy to combat the negative health consequences associated with the lack of access to healthy food resources and an abundance of unhealthy food venues. In this paper, we describe Proyecto MercadoFRESCO (Fresh Market Project), a corner store intervention project in East Los Angeles and Boyle Heights in California that used a multi-level approach with a broad range of community, business, and academic partners. These are two neighboring, predominantly Latino communities that have high rates of overweight and obesity. Located in these two communities are approximately 150 corner stores. The project used a community-engaged approach to select, recruit, and convert four corner stores, so that they could become healthy community assets in order to improve residents’ access to and awareness of fresh and affordable fruits and vegetables in their immediate neighborhoods. We describe the study framework for the multi-level intervention, which includes having multiple stakeholders, expertise in corner store operations, community and youth engagement strategies, and social marketing campaigns. We also describe the evaluation and survey methodology to determine community and patron impact of the intervention. This paper provides a framework useful to a variety of public health stakeholders for implementing a community-engaged corner store conversion, particularly in an urban food swamp. PMID:25209600

  13. 'Proyecto Orgullo', an HIV prevention, empowerment and community mobilisation intervention for gay men and transgender women in Callao/Lima, Peru.

    PubMed

    Maiorana, Andres; Kegeles, Susan; Salazar, Ximena; Konda, Kelika; Silva-Santisteban, Alfonso; Cáceres, Carlos

    2016-01-01

    We used qualitative, quantitative, and observational methods to assess the feasibility, acceptability, and potential efficacy of Proyecto Orgullo (PO), a pilot community mobilisation intervention to decrease sexual risk, promote health-seeking behaviours, and facilitate personal and community empowerment among gay men (GM) and transgender women (TW) in Peru. PO was adapted from Mpowerment and Hermanos de Luna y Sol, two US interventions. PO included six interrelated core elements: (1) Self-reflection Small Group sessions; (2) Supporting peers in HIV prevention; (3) Mobilisation Activities addressing HIV, GM/TW issues, and community empowerment; (4) A Core Group (staff + GM/TW volunteers) designing/implementing those activities; (5) A Project Space; (6) Publicity. PO included specific components for TW, but promoted that GM/TW, who historically have not worked well together, collaborate for a common goal. We found that PO was embraced by GM/TW. PO positively influenced GM/TW's HIV prevention beliefs, self-efficacy, and behaviours; provided social support and created community; facilitated individual and community empowerment; achieved that GM/TW collaborate; and established a functional Community Centre for socialising/conducting mobilisation activities. Community mobilisation strategies, lacking from HIV prevention efforts in Peru but considered key to HIV prevention, can help improve health-seeking behaviours and consolidate social norms supporting preventive behaviours among GM/TW. PMID:27373578

  14. Pieces and Parts

    ERIC Educational Resources Information Center

    Miller, Deborah A.; Ellis, Edith B.

    2006-01-01

    Although critical to understanding human sexuality and reproductive physiology, the male and female reproductive anatomy is often minimally covered by teachers. For teachers and students alike, it is often an embarrassing topic to discuss. This activity allows students and teachers to identify the parts of both reproductive systems with little…

  15. Part-Time Employment.

    ERIC Educational Resources Information Center

    Guichard, Gus; And Others

    The employment of community college instructors on a part-time basis provides the opportunity for students to study under outstanding instructors whose primary employment may be in industry or in other postsecondary institutions and permits colleges to respond better to community needs with the financial resources available to them. Along with…

  16. Basic Electricity. Part 3.

    ERIC Educational Resources Information Center

    Kilmer, Donald C.

    Third (part 3) in a set of four guides designed for the student interested in a vocation in electrical work, this guide includes four units: Unit VI--Ohm's Law, covering six lessons (voltage, current-flow and resistance, the Ohm's Law formula, formula for finding voltage, formula for finding resistance); Unit VII--Voltages, covering five lessons…

  17. Basic Electricity. Part 2.

    ERIC Educational Resources Information Center

    Kilmer, Donald C.

    This guide, the second (part 2) in a set of four guides, is designed for the student interested in a vocation in electrical work, and includes two units: Unit IV--Electrical Theory, covering thirteen lessons (matter, the atom, electrical charges in the atom, rules of electric charges, electricity, atoms in an electrical conductor, electrical…

  18. Meatcutting Testbook, Part 2.

    ERIC Educational Resources Information Center

    California State Dept. of Education, Sacramento. Bureau of Publications.

    This document contains objective tests for each topic in the Meatcutting Workbook, Part 2, which is designed for apprenticeship meatcutting programs in California. Each of the 30 tests consists of from 5 to 65 multiple-choice items with most tests containing approximately 10 items. The tests are grouped according to the eight units of the…

  19. Rockets -- Part II.

    ERIC Educational Resources Information Center

    Leitner, Alfred

    1982-01-01

    If two rockets are identical except that one engine burns in one-tenth the time of the other (total impulse and initial fuel mass of the two engines being the same), which rocket will rise higher? Why? The answer to this question (part 1 response in v20 n6, p410, Sep 1982) is provided. (Author/JN)

  20. Meatcutting Testbook, Part I.

    ERIC Educational Resources Information Center

    Strazicich, Mirko, Ed.

    This document contains objective tests for each lesson in the Meatcutting Workbook, Part I (see note), which is designed for apprenticeship programs in meatcutting in California. Each of the 36 tests contains from 10 to 45 multiple-choice items. The tests are grouped according to the eight units of the workbook: the apprentice meatcutter; applied…

  1. Understanding Math - Part I.

    ERIC Educational Resources Information Center

    Wyks, Hollis W.; Austin, Robert J.

    This is the first workbook-text in a two-part series written for deaf students. It is remedial in nature, aimed at the secondary level, and covers addition, subtraction, multiplication, and division of whole numbers. The use of the number 10 in explaining the concepts presented is stressed throughout. For the second workbook, see SE 015 828, and…

  2. Understanding Math - Part II.

    ERIC Educational Resources Information Center

    Wyks, Hollis W.; Austin, Robert J.

    This is the second remedial workbook-text in a two-part series written for deaf students at the secondary level. It covers fractions, geometry formulas, decimals and percents, and time. For the first workbook, see SE 015 827, and for the teacher's guide, see SE 015 829. (DT)

  3. Astronomía para ciegos y amblíopes. Proyecto de construcción de un planetario especial en la ciudad de Mar del Plata

    NASA Astrophysics Data System (ADS)

    Musso, S.

    ?`Qué es la Astronomía para Ciegos?. El trabajo es una adaptación en base a la escala de magnitudes de Hipparco que cambia el concepto de luz por una adaptación sonora, donde las estrellas de magnitud 6 se escuchan en 10 dB, más o menos lo que consideramos el umbral de la audición humana. Quienes no escuchan muy bien no pueden escuchar las magnitudes 6, de la misma manera que muchos de nosotros, que no poseemos una visión perfecta, no podemos observar esas mismas estrellas en el cielo (más allá de la polución). A los astros de magnitud 5 vamos a relacionarlos a un sonido en 20 dB. Y así sucesivamente. También los colores estarán representados en una convención de graves a agudos y lo mismo algunas características del cielo. Por ejemplo, la Vía Láctea se mostrará como un ``ruido", como bien nos lo hicieron ver nuestros futuros destinatarios. En Mar del Plata nos encontramos ya trabajando en un proyecto que tiene como objetivo final la construcción del Primer Planetario Acústico del Mundo, una herramienta para la enseñanza de la astronomía, un espacio para la lucha contra la discriminación del discapacitado y una posibilidad de ``ver el cielo de un modo diferente".

  4. Just Perfect, Part 2

    ERIC Educational Resources Information Center

    Scott, Paul

    2007-01-01

    In "Just Perfect: Part 1," the author defined a perfect number N to be one for which the sum of the divisors d (1 less than or equal to d less than N) is N. He gave the first few perfect numbers, starting with those known by the early Greeks. In this article, the author provides an extended list of perfect numbers, with some comments about their…

  5. H5Part

    2005-12-01

    Particle based simulations of accelerator beam-lines, especially in six dimensional phase space, generate vast amounts of data. Even though a subset of statistical information regarding phase space or analysis needs to be preserved, reading and writing such enormous restart files on massively parallel supercomputing systems remains challenging. H5Part is a very simple data storage schema and provides an API that simplifies the reading/writing of the data to the HDF5 file format. An important foundation formore » a stable visualization and data analysis environment is a stable and portable file storage format and its associated APIs. The presence of a "common file storage format," including associated APIs, will help foster a fundamental level of interoperability across the project’s software infrastructure. It will also haip ensure that key data analysis capabilities are present during the earliest phases of the software development effort. H5Part is built on top of the HDF5 (Hierarchical Data Format). HDF5 offers a self.describing machine-independent binary file format that supports scalable parallel I/O performance for MPI codes on a variety of supercomputlng systems, and works equally well on laptop computers. The API Is available (or C, C++, and Fortran codes. The H5Part file format and APIs enable disparate research groups with different simulation implementations to transparently share datasets and data analysis tools. For instance, the common file format will enable groups that depend on completely different simulation implementations to share data analysis tools like PartView and AVS/Express without any additional programming.« less

  6. Immunomodulation. Part IV: Glutamine.

    PubMed

    Bell, Susan Givens

    2006-01-01

    Glutamine, a nonessential amino acid that appears to be conditionally essential during periods of physiologic stress, plays important physiologic roles in the immune system. However, neither enteral nor parenteral glutamine supplementation makes a difference in the rate of systemic infection or of NEC in very low birth weight infants. Thus, the search for agents to enhance the neonate's immune system and to serve as safe and effective adjuvants to antibiotics continues. Part V, the final article in this immunomodulation series, will explore the use of probiotics to support the neonatal immune system.

  7. Endocrine system: part 1.

    PubMed

    Johnstone, Carolyn; Hendry, Charles; Farley, Alistair; McLafferty, Ella

    2014-05-27

    This article, which forms part of the life sciences series and is the first of two articles on the endocrine system, examines the structure and function of the organs of the endocrine system. It is important that nurses understand how the endocrine system works and its role in maintaining health. The role of the endocrine system and the types, actions and control of hormones are explored. The gross structure of the pituitary and thyroid glands are described along with relevant physiology. Several disorders of the thyroid gland are outlined. The second article examines growth hormone, the pancreas and adrenal glands.

  8. 16 CFR Figure 2 to Part 1511 - Small Parts Gage

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Small Parts Gage 2 Figure 2 to Part 1511 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR PACIFIERS Pt.1511, Fig. 2 Figure 2 to Part 1511—Small Parts Gage EC03OC91.069...

  9. 16 CFR Figure 2 to Part 1511 - Small Parts Gage

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Small Parts Gage 2 Figure 2 to Part 1511 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR PACIFIERS Pt.1511, Fig. 2 Figure 2 to Part 1511—Small Parts Gage EC03OC91.069...

  10. 16 CFR Figure 2 to Part 1511 - Small Parts Gage

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Small Parts Gage 2 Figure 2 to Part 1511 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR PACIFIERS Pt.1511, Fig. 2 Figure 2 to Part 1511—Small Parts Gage EC03OC91.069...

  11. 16 CFR Figure 2 to Part 1511 - Small Parts Gage

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Small Parts Gage 2 Figure 2 to Part 1511 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR PACIFIERS Pt.1511, Fig. 2 Figure 2 to Part 1511—Small Parts Gage EC03OC91.069...

  12. 16 CFR Figure 2 to Part 1511 - Small Parts Gage

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Small Parts Gage 2 Figure 2 to Part 1511 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR PACIFIERS Pt.1511, Fig. 2 Figure 2 to Part 1511—Small Parts Gage EC03OC91.069...

  13. Proyecto multidisciplinar `Marte nos visita'

    NASA Astrophysics Data System (ADS)

    Merlo, D.; Merlo, N.; Parodi, B.; Garis, A.; Peralta, G.; Rovessi, V.; Urrutia, S.; Calderón, J.; Bustos Fierro, I.; Melia, R.

    The planets Earth and Mars reached in August 2003 the most approximation in the last 58,000 years. In order to that we carried out a transversal study of red planet, joining the knowledges from several subjects of second school year of unified basic cycle (eighth basic general education) at I.P.E.M. No 249 "Nicolás Copérnico" (a public secondary institution from Córdoba, Argentine). In this study, activities in accordance with current contents has been proposed by common consents of each teacher. Besides, students visited Córdoba Astronomical Observatory in order to search informations and received a multimedia exposition about of astronomical event and a performance of the "Carl Sagan" Moveable Planetary. Finally, each student carried out practical works and wrote an integrative report, which one has been evaluated and exposed at ExpoIPEM 2003, an annual exhibition of several specialities that Institution offers in its specialization cycle (10-12 grade), where the annual students' activities are exhibited too (workshops, school projects, etc.).

  14. Proyecto Leer Bulletin, Number 12.

    ERIC Educational Resources Information Center

    Tome, Martha V., Ed.

    This bulletin is designed to serve the Spanish-speaking population of the United States. This issue contains a list of popular magazines in Spanish for children and adults. Another section provides the names of comics for children. Titles to be found under "Publications in Series and Collections" are the popular type of romantic, western, or…

  15. Proyecto Leer Bulletin, Number 11.

    ERIC Educational Resources Information Center

    Tome, Martha V., Ed.

    Educational materials for students of Spanish and the Spanish speaking are listed in this bulletin. A general information section lists reference materials on bilingual children, the blind and physically handicapped, comics, consumer education, employment, health, heritage of the Spanish speaking, Mexican American biography, Mexican American film…

  16. Proyecto Leer Bulletin, Number 9.

    ERIC Educational Resources Information Center

    Benson, Susan Shattuck

    This bulletin lists addresses of publishers and distributors of audiovisual instructional materials in Spanish in the United States and Latin America. Sources are listed in four categories: (1) federal sources of materials, information on materials, names of resource people, programs, and proposal guidelines concerning the Spanish speaking; (2)…

  17. Proyecto Leer Bulletin, Number 8.

    ERIC Educational Resources Information Center

    Benson, Susan Shattuck

    This bulletin lists educational materials for the Spanish speaking. Several hundred documents are listed in three main sections: (1) organizations, programs, laws, and news related to the Spanish speaking; (2) a list of books selected; and (3) a list of publishers and distributors with their addresses. Several bibliographies are included. Entries…

  18. Proyecto Leer Bulletin, Number 10.

    ERIC Educational Resources Information Center

    Benson, Susan Shattuck

    This guide to instructional materials for teachers of Spanish contains references to commercially-prepared works in several classified areas. The works listed are intended for use in grades ranging from kindergarten through senior high school and also include materials for adult education. The 10 categories cover: (1) audiovisual materials, (2)…

  19. Electronic communication. Part III.

    PubMed

    Bergren, M D

    1995-02-01

    This is the concluding article of a three-part series on electronic communication for school nurses. The October 1994 column described electronic communication and the hardware and software required. The December 1994 column examined e-mail, bulletin boards, databases, and file transfers. This column will list many health and nursing resources available on-line. Some of the resources are available only through the Internet. Others are accessible by more than one route: dial-in, telnet, gopher, or world wide web. A few of the services, such as MEDLINE, are only accessed with purchased accounts (Glowniak & Bushway, 1994). The electronic resources of interest to school nurses are so numerous it would be impossible to cite all of them in a column of this length. Selected resources for the school health provider will be listed in alphabetical order. PMID:7767047

  20. Rickets: Part I.

    PubMed

    Shore, Richard M; Chesney, Russell W

    2013-01-01

    Rickets is characterized by impaired mineralization and ossification of the growth plates of growing children caused by a variety of disorders, the most frequent of which is nutritional deficiency of vitamin D. Despite ample knowledge of its etiology and the availability of cost-effective methods of preventing it, vitamin D deficiency rickets remains a significant problem in developing and developed countries. This two-part review covers the history, etiology, pathophysiology and clinical and radiographical findings of vitamin D deficiency rickets. Other less frequent causes of rickets and some of the disorders entering into the differential diagnoses of rickets are also considered. Controversial issues surrounding vitamin D deficiency include determination of what constitutes vitamin D sufficiency and the potential relationship between low levels of vitamin D metabolites in many individuals and unexplained fractures in infants.

  1. Canine hypoadrenocorticism: Part I

    PubMed Central

    Klein, Susan C.; Peterson, Mark E.

    2010-01-01

    Hypoadrenocorticism (Addison’s disease) has been referred to as “the great pretender,” due to its ability to mimic other common diseases in the dog and thereby represent a diagnostic challenge. Naturally occurring hypoadrenocorticism is an uncommon canine disease. Young, female dogs are overrepresented. Hypoadrenocorticism typically results from immune-mediated destruction of all adrenocortical layers, resulting in deficiencies of min-eralocorticoids (aldosterone) and glucocorticoids (cortisol). A small number of dogs suffer from glucocorticoid deficiency only. Dogs suffering from hypoadrenocorticism may present in a variety of conditions, from a mildly ill dog to a shocky and recumbent dog. This review discusses etiology, pathophysiology, history, physical examination findings, and diagnostic findings in the Addisonian patient. A follow-up article (Part II) will discuss the definitive diagnosis and management strategies for these patients. PMID:20357943

  2. Using UNIX, Part 2.

    PubMed

    Mann, J

    2001-01-01

    We talked about using 3 UNIX commands. In UNIX, there are many other options for using them. But for the most part, if you can use them like I have shown, you will be able to do everything you need. If you can learn these few points well, I think you will be better off than if I give you 50 options and leave you totally confused about when to do what. On some UNIX systems, an electronic version of the UNIX manual is on the system. This gives a lot more information about each command. However, it is a bit difficult to understand. If you want more information about any command, you can type man COMMAND, e.g., man ls. This will give you more ways to use the ls command. And remember, the command pwd tells what directory you are in, cd/directory changes to another directory, ls lists the contents of the directory you are in, ls more displays the directory contents 1 page at a time (the space bar gives you the next page), ls-al gives a detailed listing of the contents of the directory you are in, ls-al more displays them 1 page at a time (the space bar gives you the next page).

  3. Cardiovascular Health, Part 2

    PubMed Central

    Baman, Timir S.; Gupta, Sanjaya; Day, Sharlene M.

    2010-01-01

    Context: An athlete’s health may be endangered if he or she continues to compete after diagnosis of certain cardiovascular conditions. The most worrisome risk is sudden cardiac death; the annual rate in US athletes is 1 in 50 000 to 200 000. Evidence Acquisition: Part 2 of this review highlights the current guidelines and controversies surrounding compatibility of participation with a variety of cardiac conditions in competitive and recreational athletics. Data sources were limited to peer-reviewed publications from 1984 to the April 2009. Results: The guidelines published by the American College of Cardiology and the European Society of Cardiology provide a framework for safe competitive and recreational sports participation in athletes with a broad spectrum of inherited and acquired cardiovascular disorders. These guidelines are necessarily conservative because it is not currently possible to individualize risk prediction. Few data are available in many areas, particularly in the noncompetitive arena or in older athletes. Conclusions: Published national guidelines are currently the foundation governing return-to-play decisions in athletes with cardiovascular conditions. Further studies are needed to refine risk stratification algorithms to allow athletes with cardiovascular conditions to reap the health benefits of regular exercise and sports participation without undue risk. PMID:23015920

  4. Parts and boundaries.

    PubMed

    Jackendoff, R

    1991-12-01

    Within the framework of Conceptual Semantics, a family of conceptual features and functions is developed that accounts for phenomena in the semantics of noun phrases such as the mass-count distinction, plurality, the partitive construction (a leg of the table), the constitutive construction (a house of wood), the "Universal Packager" (three coffees), and boundary words such as end, edge, and crust. Using the strong formal parallelism between noun phrase semantics and event structure that is a hallmark of the Conceptual Semantics approach, the features and functions of the NP system are applied to a wide range of problems in event structure, for example the analysis of the Vendler classes, the meaning of the progressive, the "imperfective paradox", and "aktionsarten" such as the syntactically unexpressed sense of repetition in The light flashed until dawn. Crucial to the analysis is that these features and functions can be expressed in syntactic structure either by being part of lexical conceptual structure, or by use of a morphological affix, or by being associated with the meaning of a construction such as N of NP or nominal compounding. Alternatively, they may remain unexpressed altogether, being introduced into the conceptual structure of a phrase by "rules of construal". This shows that lexical semantics and phrasal semantics interpenetrate deeply, and that there is no strict one-to-one correspondence between syntactic and semantic structures. In addition, the analysis provides further evidence that natural language semantics must be based on a psychological view of meaning--it must be concerned with how language users are constructed to understand and schematize the world. PMID:1790657

  5. 9. SITE OVERVIEW. PART 4 OF 6 PART PANORAMA WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. SITE OVERVIEW. PART 4 OF 6 PART PANORAMA WITH NOS. CA-265-6 TO CA-265-11. ARROYO SECO PARKWAY AS SEEN FROM RADIO TOWER HILL. PART 4 SHOWS ARROYO SECO PARKWAY IN FOREGROUND AND FIGUEROA STREET AT CENTER. LOOKING 316° NW. - Arroyo Seco Parkway, Los Angeles to Pasadena, Los Angeles, Los Angeles County, CA

  6. Cryogenic Treatment of Metal Parts

    SciTech Connect

    Chillar, Rahul; Agrawal, S. C.

    2006-03-31

    Cryogenic treatment and its variables have been described. Results of eight engineering tests carried out on cryotreated parts have been presented. Cryogenic treatment of metal parts enhances useful properties which in turn, improves various strengths. Our tests viz. Abrasion, Torsion, Fatigue, Tensile, Shear, Hardness and Impact on Mild steel, Cast Iron, Brass and Copper show that the cryogenic treatment improved useful properties of mild steel parts appreciably but did not show promise with brass and copper parts.

  7. [Physicians working part-time].

    PubMed

    Kiechl-Kohlendorfer, Ursula; Hackl, Johann Michael

    2004-04-01

    In order to ensure the best possible medical care and high-quality research, hospital medical staff must be well educated and highly motivated. Part-time work can help to provide good human resources. Moreover, part-time jobs are often necessary as a means of juggling work and family responsibilities. The aim of this study was to illustrate the legal and educational groundwork for part-time work for physicians in Austria and to outline the advantages and drawbacks of part-time work. In March 2003, all medical doctors working part-time at hospitals in the Austrian state of the Tyrol (n = 60) were surveyed by means of a written questionnaire with the aim of finding out their motives for taking a part-time job as well as the positive and negative aspects involved. The response rate was nearly 70% (n = 40). Most of the part-time hospital physicians were female. The vast majority chose part-time employment in order to better balance family and job. Problems involved in part-time work are legal issues (part-time employment does not always qualify for medical training), the comparatively low salary and the fewer career opportunities. All respondents agreed that patient care, teaching and research are not compatible on a part-time basis. Another negative aspect is the generally strong time pressure experienced in part-time jobs. Despite these negative aspects of working part-time, advantages are considered more important, especially the better balancing of job and family and the possibility of an important early professional reintegration. Better acceptance of part-time jobs would help to make part-time work more attractive. An important improvement is associated with the forthcoming changes in the laws governing part-time work and medical training. PMID:15182044

  8. Air Pollution. Part A: Analysis.

    ERIC Educational Resources Information Center

    Ledbetter, Joe O.

    Two facets of the engineering control of air pollution (the analysis of possible problems and the application of effective controls) are covered in this two-volume text. Part A covers Analysis, and Part B, Prevention and Control. (This review is concerned with Part A only.) This volume deals with the terminology, methodology, and symptomatology…

  9. Exploring Water Pollution. Part II

    ERIC Educational Resources Information Center

    Rillo, Thomas J.

    1975-01-01

    This is part two of a three part article related to the science activity of exploring environmental problems. Part one dealt with background information for the classroom teacher. Presented here is a suggested lesson plan on water pollution. Objectives, important concepts and instructional procedures are suggested. (EB)

  10. Boiler - tuning basics, part 1

    SciTech Connect

    Leopold, T.

    2009-03-15

    Tuning power plant controls takes nerves of steel and an intimate knowledge of plant systems gained only by experience. Tuning controls also requires equal parts art and science, which probably is why there are so few tuning experts in the power industry. In part 1 of a two-part series, the author explores a mix of the theoretical and practical aspects of tuning boiler control. 5 figs.

  11. Water Pollution: Part I, Municipal Wastewaters; Part II, Industrial Wastewaters.

    ERIC Educational Resources Information Center

    Fowler, K. E. M.

    This publication is an annotated bibliography of municipal and industrial wastewater literature. This publication consists of two parts plus appendices. Part one is entitled Municipal Wastewaters and includes publications in such areas as health effects of polluted waters, federal policy and legislation, biology and chemistry of polluted water,…

  12. Detecting Earthquakes--Part 2.

    ERIC Educational Resources Information Center

    Isenberg, C.; And Others

    1983-01-01

    Basic concepts associated with seismic wave propagation through the earth and the location of seismic events were explained in part 1 (appeared in January 1983 issue). This part focuses on the construction of a student seismometer for detecting earthquakes and underground nuclear explosions anywhere on the earth's surface. (Author/JN)

  13. Intercultural Communication Bibliography (Part 4).

    ERIC Educational Resources Information Center

    Kitao, Kenji; Kitao, S. Kathleen

    The fourth part of a bibliography on intercultural communication is, like the first three parts, intended primarily for Japanese teachers of English as a second language but is also useful for anyone interested in intercultural communication. The bibliography contains 480 citations of books, journal articles, and other sources for information…

  14. "Leading Parts" and Organizational Change.

    ERIC Educational Resources Information Center

    Brown, L. Dave

    This paper develops a conceptual framework for identifying organizational change and applies the framework to understanding organizational change. The main focus of the framework is the concept of "leading parts." Leading parts may be dominant or catalytic in their impact on systems; and understanding their operation requires analysis of the…

  15. The Moonwatch Programme, Part 8

    NASA Astrophysics Data System (ADS)

    Roberts, Greg

    2015-08-01

    This part deals with the satellite tracking done in Cape Town and covers the Kinetheodolite setup at the then Royal Observatory and manned by part time amateur observers. It also covers the activities of Roberts at his Kenilworth tracking site. The activities of Bill Hirst and his station at Bergvliet are also described.

  16. Staircase and Fractional Part Functions

    ERIC Educational Resources Information Center

    Amram, Meirav; Dagan, Miriam; Ioshpe, Michael; Satianov, Pavel

    2016-01-01

    The staircase and fractional part functions are basic examples of real functions. They can be applied in several parts of mathematics, such as analysis, number theory, formulas for primes, and so on; in computer programming, the floor and ceiling functions are provided by a significant number of programming languages--they have some basic uses in…

  17. 6. SITE OVERVIEW. PART 1 OF 6 PART PANORAMA WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. SITE OVERVIEW. PART 1 OF 6 PART PANORAMA WITH NOS. CA-265-7 TO CA-265-11. ARROYO SECO PARKWAY AS SEEN FROM RADIO TOWER HILL (APPROXIMATELY 34° 5' BY 118° 12'30" ON USGS LOS ANGELES QUADRANGLE). PART 1 SHOWS GRAND VIEW POINT AT RIGHT REAR (LOCATION OF CAMERA POSITION FOR PHOTOGRAPHS NOS. 265-1 TO CA-265-5) AND FIGUEROA VIADUCT OVERCROSSING; DOWNTOWN LOS ANGELES IS AT LEFT REAR. LOOKING 234° SW. - Arroyo Seco Parkway, Los Angeles to Pasadena, Los Angeles, Los Angeles County, CA

  18. The MAJORANA Parts Tracking Database

    NASA Astrophysics Data System (ADS)

    Abgrall, N.; Aguayo, E.; Avignone, F. T.; Barabash, A. S.; Bertrand, F. E.; Brudanin, V.; Busch, M.; Byram, D.; Caldwell, A. S.; Chan, Y.-D.; Christofferson, C. D.; Combs, D. C.; Cuesta, C.; Detwiler, J. A.; Doe, P. J.; Efremenko, Yu.; Egorov, V.; Ejiri, H.; Elliott, S. R.; Esterline, J.; Fast, J. E.; Finnerty, P.; Fraenkle, F. M.; Galindo-Uribarri, A.; Giovanetti, G. K.; Goett, J.; Green, M. P.; Gruszko, J.; Guiseppe, V. E.; Gusev, K.; Hallin, A. L.; Hazama, R.; Hegai, A.; Henning, R.; Hoppe, E. W.; Howard, S.; Howe, M. A.; Keeter, K. J.; Kidd, M. F.; Kochetov, O.; Konovalov, S. I.; Kouzes, R. T.; LaFerriere, B. D.; Leon, J. Diaz; Leviner, L. E.; Loach, J. C.; MacMullin, J.; Martin, R. D.; Meijer, S. J.; Mertens, S.; Miller, M. L.; Mizouni, L.; Nomachi, M.; Orrell, J. L.; O`Shaughnessy, C.; Overman, N. R.; Petersburg, R.; Phillips, D. G.; Poon, A. W. P.; Pushkin, K.; Radford, D. C.; Rager, J.; Rielage, K.; Robertson, R. G. H.; Romero-Romero, E.; Ronquest, M. C.; Shanks, B.; Shima, T.; Shirchenko, M.; Snavely, K. J.; Snyder, N.; Soin, A.; Suriano, A. M.; Tedeschi, D.; Thompson, J.; Timkin, V.; Tornow, W.; Trimble, J. E.; Varner, R. L.; Vasilyev, S.; Vetter, K.; Vorren, K.; White, B. R.; Wilkerson, J. F.; Wiseman, C.; Xu, W.; Yakushev, E.; Young, A. R.; Yu, C.-H.; Yumatov, V.; Zhitnikov, I.

    2015-04-01

    The MAJORANA DEMONSTRATOR is an ultra-low background physics experiment searching for the neutrinoless double beta decay of 76Ge. The MAJORANA Parts Tracking Database is used to record the history of components used in the construction of the DEMONSTRATOR. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provide a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. A web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.

  19. The Majorana Parts Tracking Database

    SciTech Connect

    Abgrall, N.

    2015-01-16

    The Majorana Demonstrator is an ultra-low background physics experiment searching for the neutrinoless double beta decay of 76Ge. The Majorana Parts Tracking Database is used to record the history of components used in the construction of the Demonstrator. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provides a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. In summary, a web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.

  20. The Majorana Parts Tracking Database

    DOE PAGESBeta

    Abgrall, N.

    2015-01-16

    The Majorana Demonstrator is an ultra-low background physics experiment searching for the neutrinoless double beta decay of 76Ge. The Majorana Parts Tracking Database is used to record the history of components used in the construction of the Demonstrator. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provides a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation.more » In summary, a web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.« less

  1. The Majorana Parts Tracking Database

    SciTech Connect

    Abgrall, N.; Aguayo, E.; Avignone, F. T.; Barabash, A. S.; Bertrand, F. E.; Brudanin, V.; Busch, M.; Byram, D.; Caldwell, A. S.; Chan, Y-D.; Christofferson, C. D.; Combs, D. C.; Cuesta, C.; Detwiler, J. A.; Doe, P. J.; Efremenko, Yu.; Egorov, V.; Ejiri, H.; Elliott, S. R.; Esterline, J.; Fast, J. E.; Finnerty, P.; Fraenkle, F. M.; Galindo-Uribarri, A.; Giovanetti, G. K.; Goett, J.; Green, M. P.; Gruszko, J.; Guiseppe, V. E.; Gusev, K.; Hallin, A. L.; Hazama, R.; Hegai, A.; Henning, R.; Hoppe, E. W.; Howard, S.; Howe, M. A.; Keeter, K. J.; Kidd, M. F.; Kochetov, O.; Konovalov, S. I.; Kouzes, R. T.; LaFerriere, B. D.; Leon, J. Diaz; Leviner, L. E.; Loach, J. C.; MacMullin, J.; Martin, R. D.; Meijer, S. J.; Mertens, S.; Miller, M. L.; Mizouni, L.; Nomachi, M.; Orrell, J. L.; O׳Shaughnessy, C.; Overman, N. R.; Petersburg, R.; Phillips, D. G.; Poon, A. W. P.; Pushkin, K.; Radford, D. C.; Rager, J.; Rielage, K.; Robertson, R. G. H.; Romero-Romero, E.; Ronquest, M. C.; Shanks, B.; Shima, T.; Shirchenko, M.; Snavely, K. J.; Snyder, N.; Soin, A.; Suriano, A. M.; Tedeschi, D.; Thompson, J.; Timkin, V.; Tornow, W.; Trimble, J. E.; Varner, R. L.; Vasilyev, S.; Vetter, K.; Vorren, K.; White, B. R.; Wilkerson, J. F.; Wiseman, C.; Xu, W.; Yakushev, E.; Young, A. R.; Yu, C. -H.; Yumatov, V.; Zhitnikov, I.

    2015-04-01

    The MAJORANA DEMONSTRATOR is an ultra-low background physics experiment searching for the neutrinoless double beta decay of 76Ge. The MAJORANA Parts Tracking Database is used to record the history of components used in the construction of the DEMONSTRATOR. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provides a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. A web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radiopurity required for this rare decay search.

  2. GSFC Preferred Parts List PPL-15

    NASA Technical Reports Server (NTRS)

    Adolphsen, J. W. (Editor)

    1980-01-01

    A listing is presented of preferred electronic parts, part upgrading procedures, part derating guidelines, and part screening procedures to be used in the selection, procurement, and application of parts for Goddard Space Flight Center space systems and ground support equipment.

  3. GSFC preferred parts lists PPL-17

    NASA Technical Reports Server (NTRS)

    Baldini, B. P. (Editor)

    1984-01-01

    A listing of preferred parts, part upgrading procedures, part derating guidelines, and part screening procedures to be used in the selection, procurement, and application of parts for Goddard Space Flight Center (GSFC) space systems and ground support equipment is contained.

  4. The Combine Project: An Experience in a Dual-Language Classroom = El proyecto de la cosechadora: una experiencia en una clase bilingue.

    ERIC Educational Resources Information Center

    Wilson, Rebecca

    This article, also available in Spanish, describes what happened when a bilingual kindergarten class in West Liberty, Iowa, investigated a combine. The dual-language Kindergarten program supports content area instruction in both Spanish and English. The first part of the article tells the story of the Combine Project, this class's first project…

  5. Catalog of Infrared Observations. Part I: Data. Part II: Appendixes.

    NASA Astrophysics Data System (ADS)

    Gezari, D. Y.; Schmitz, M.; Mead, J. M.

    The Catalog of Infrared Observations (CIO) is a compilation of infrared astronomical data obtained from an extensive literature search of astronomical journals and major astronomical catalogs and surveys. The literature searches are complete for years 1965 through 1986. The Catalog is published in two parts, with the observational data (roughly 200,000 observations of 20,000 individual sources) listed in Part I, and supporting appendices in Part II. The expanded Second Edition contains a new feature: complete IRAS 4-band data for all CIO sources detected, listed with the main Catalog observations, as well as in complete detail in the Appendix. The appendices include an atlas of infrared source positions, two bibliographies of infrared literature upon which the search was based, and an atlas of infrared spectral ranges, and IRAS data for the CIO sources. The complete CIO database is available in printed microfiche and magnetic tape formats.

  6. Indentured Parts List Maintenance and Part Assembly Capture Tool - IMPACT

    NASA Technical Reports Server (NTRS)

    Jain, Bobby; Morris, Jill; Sharpe, Kelly

    2004-01-01

    Johnson Space Center's (JSC's) indentured parts list (IPL) maintenance and parts assembly capture tool (IMPACT) is an easy-to-use graphical interface for viewing and maintaining the complex assembly hierarchies of large databases. IMPACT, already in use at JSC to support the International Space Station (ISS), queries, updates, modifies, and views data in IPL and associated resource data, functions that it can also perform, with modification, for any large commercial database. By enabling its users to efficiently view and manipulate IPL hierarchical data, IMPACT performs a function unlike that of any other tool. Through IMPACT, users will achieve results quickly, efficiently, and cost effectively.

  7. Formation of parting in quartz

    NASA Astrophysics Data System (ADS)

    Jørgen Kjøll, Hans; Eske Sørensen, Bjørn

    2014-05-01

    This paper presents hydrothermal quartz with macroscopic planar parting from the Mesoproterozoic Modum complex in southern Norway. Similar macroscopic parting in hydrothermal quartz with macroscopic planar structures has only been described from two localities in the world; Madagascar (Flörke et al., 1981) and Southern California (Murdoch et al., 1938). The study area consists of well foliated and banded sillimanite- garnet- amphibolite- mica gneiss that is cut at high angle by hydrothermal veins containing albite, chlinoclore, hornblende, hydroxyl apatite and quartz. The rim of the veins is generally made up of almost pure end-member euhedral albite. Then there is vugs with euhedral hornblende (10-25cm long) and euhedral hydroxyl apatite with size ranging from mm scale to several cm. Some places the quartz encloses apatite and hornblende. The quartz is anhedral, inequigranular with undulose extinction bordering sub grain rotation. It has large planar penetrative parting faces with pearly luster; however this is not consistent throughout the outcrop and some places the penetrative faces disappears and the quartz has a conchoidal fracture. The planar faces continue throughout the specimens with a few mm spacing. Thin sections oriented perpendicular to the most pronounced planar structure show lamellas that extinguishes at small angles (2 degrees) to each other. EBSD mapping of the planar faces shows two orientations {0-111} and {1-101}, corresponding to the r- and z-faces respectively, separated by irregular boundaries. The misorientation between these two crystallographic orientations on the parting is a 60 degree rotation on [0 0 1] in correspondence to the dauphiné twin law. Investigations conducted on thin sections cut orthogonal to the parting shows that the parting cuts and offsets the dauphiné twins, indicating a late genesis of the parting. However some internal stress induced movement of the twins are visible. SEM-CL documents three generations of quartz

  8. Staircase and fractional part functions

    NASA Astrophysics Data System (ADS)

    Amram, Meirav; Dagan, Miriam; Ioshpe, Michael; Satianov, Pavel

    2016-10-01

    The staircase and fractional part functions are basic examples of real functions. They can be applied in several parts of mathematics, such as analysis, number theory, formulas for primes, and so on; in computer programming, the floor and ceiling functions are provided by a significant number of programming languages - they have some basic uses in various programming tasks. In this paper, we view the staircase and fractional part functions as a classical example of non-continuous real functions. We introduce some of their basic properties, present some interesting constructions concerning them, and explore some intriguing interpretations of such functions. Throughout the paper, we use these functions in order to explain basic concepts in a first calculus course, such as domain of definition, discontinuity, and oddness of functions. We also explain in detail how, after researching the properties of such functions, one can draw their graph; this is a crucial part in the process of understanding their nature. In the paper, we present some subjects that the first-year student in the exact sciences may not encounter. We try to clarify those subjects and show that such ideas are important in the understanding of non-continuous functions, as a part of studying analysis in general.

  9. Calculus: A Computer Oriented Presentation, Part 1 [and] Part 2.

    ERIC Educational Resources Information Center

    Stenberg, Warren; Walker, Robert J.

    Parts one and two of a one-year computer-oriented calculus course (without analytic geometry) are presented. The ideas of calculus are introduced and motivated through computer (i.e., algorithmic) concepts. An introduction to computing via algorithms and a simple flow chart language allows the book to be self-contained, except that material on…

  10. Border Issues in Education, Part 1 [and] Part 2.

    ERIC Educational Resources Information Center

    Alexander-Kasparik, Rosalind, Ed.; Soulas, John, Comp.

    1994-01-01

    These newsletters examine issues in education along the United States and Mexico border. Topics in Part 1 include the ramifications of the North American Free Trade Agreement (NAFTA) for education, the impact of immigration on schools, and the structure and history of the Mexican educational system and its reforms in theory and practice. Educators…

  11. X-pinch. Part II

    SciTech Connect

    Pikuz, S. A. Shelkovenko, T. A.; Hammer, D. A.

    2015-06-15

    Results of experimental studies of the X-pinch since its invention and implementation in 1982 at the Lebedev Physical Institute are presented. The review consists of two parts. The first part briefly outlines the history of creation and studies of X-pinches, describes the diagnostic techniques and devices developed during these studies, and presents the main results obtained in studying the physical processes occurring in the X-pinch. The second part is devoted to the results of detailed studies of the spatial, temporal, and spectral characteristics of the X-pinch hot spot—the region where the highest plasma parameters are achieved and which is a source of X-ray emission with extreme parameters. Some results of X-pinch simulations are also presented.

  12. Surface Seal for Carbon Parts

    NASA Technical Reports Server (NTRS)

    Shuford, D. M.; Spruiell, J. P.

    1982-01-01

    Surface pores in parts made of graphite or reinforced-carbon/ carbon materials are sealed by a silicon carbide-based coating. Coating inhibits subsurface oxidation and lengthens part life. Starting material for coating is graphite felt, which is converted to silicon carbide felt by processing it according to a prescribed time/temperature schedule. Converted felt is pulverized in a ball mill and resulting powder is mixed with an equal weight of black silicon carbide powder. Powder mixture is combined with an equal weight of adhesive to form a paste.

  13. Grinding Parts For Automatic Welding

    NASA Technical Reports Server (NTRS)

    Burley, Richard K.; Hoult, William S.

    1989-01-01

    Rollers guide grinding tool along prospective welding path. Skatelike fixture holds rotary grinder or file for machining large-diameter rings or ring segments in preparation for welding. Operator grasps handles to push rolling fixture along part. Rollers maintain precise dimensional relationship so grinding wheel cuts precise depth. Fixture-mounted grinder machines surface to quality sufficient for automatic welding; manual welding with attendant variations and distortion not necessary. Developed to enable automatic welding of parts, manual welding of which resulted in weld bead permeated with microscopic fissures.

  14. Understanding quantitative research: part 1.

    PubMed

    Hoe, Juanita; Hoare, Zoë

    This article, which is the first in a two-part series, provides an introduction to understanding quantitative research, basic statistics and terminology used in research articles. Critical appraisal of research articles is essential to ensure that nurses remain up to date with evidence-based practice to provide consistent and high-quality nursing care. This article focuses on developing critical appraisal skills and understanding the use and implications of different quantitative approaches to research. Part two of this article will focus on explaining common statistical terms and the presentation of statistical data in quantitative research.

  15. Parts Specialist. Teacher Edition. Second Edition.

    ERIC Educational Resources Information Center

    Fuqua, Lou; And Others

    This set of instructional materials provides secondary and postsecondary students with an opportunity to explore the career choices available in the parts merchandising industry. The skills presented are useful to any student pursuing a career in auto parts, heavy equipment parts, small engine parts, tractor parts, appliance parts, or for any…

  16. Air Pollution Control, Part I.

    ERIC Educational Resources Information Center

    Strauss, Werner, Ed.

    Authoritative reviews in seven areas of current importance in air pollution control are supplied in this volume, the first of a two-part set. Titles contained in this book are: "Dispersion of Pollutants Emitted into the Atmosphere,""The Formation and Control of Oxides of Nitrogen in Air Pollution,""The Control of Sulfur Emissions from Combustion…

  17. Taking Part One GNVQ Forward.

    ERIC Educational Resources Information Center

    Frankland, Gillian; Ebrahim, Nazir

    This document is intended to assist practitioners involved in the delivery of Part One General National Vocational Qualifications (GNVQs), which are GNVQs designed for students in the United Kingdom who are at Key Stage 4 and the post-16 level. Section 1 examines the following topics of interest to centers that are contemplating introducing Part…

  18. Machine Shop Fundamentals: Part I.

    ERIC Educational Resources Information Center

    Kelly, Michael G.; And Others

    These instructional materials were developed and designed for secondary and adult limited English proficient students enrolled in machine tool technology courses. Part 1 includes 24 lessons covering introduction, safety and shop rules, basic machine tools, basic machine operations, measurement, basic blueprint reading, layout, and bench tools.…

  19. List of Preferred Electronic Parts

    NASA Technical Reports Server (NTRS)

    Covey, R. E.; Scott, W. R.; Hess, L. M.; Steffy, G.; Stott, F. R.

    1986-01-01

    Components passed stringent qualification tests tabulated and described. Destructive and nondestructive qualification testing confirmed parts capable of withstanding spacecraft environments without excessive degradation and have stable characteristics during operating lives. Testing assessed effects of electrical, environmental, and mechanical stresses in various levels and time durations.

  20. Glues Used in Airplane Parts

    NASA Technical Reports Server (NTRS)

    Allen, S W; Truax, T R

    1920-01-01

    This report was prepared for the National Advisory Committee for Aeronautics and presents the results of investigations conducted by the Forest Products Laboratory of the United States Forest Service on the manufacture, preparation, application, testing and physical properties of the different types of glues used in wood airplane parts.

  1. Speech parts as Poisson processes.

    PubMed

    Badalamenti, A F

    2001-09-01

    This paper presents evidence that six of the seven parts of speech occur in written text as Poisson processes, simple or recurring. The six major parts are nouns, verbs, adjectives, adverbs, prepositions, and conjunctions, with the interjection occurring too infrequently to support a model. The data consist of more than the first 5000 words of works by four major authors coded to label the parts of speech, as well as periods (sentence terminators). Sentence length is measured via the period and found to be normally distributed with no stochastic model identified for its occurrence. The models for all six speech parts but the noun significantly distinguish some pairs of authors and likewise for the joint use of all words types. Any one author is significantly distinguished from any other by at least one word type and sentence length very significantly distinguishes each from all others. The variety of word type use, measured by Shannon entropy, builds to about 90% of its maximum possible value. The rate constants for nouns are close to the fractions of maximum entropy achieved. This finding together with the stochastic models and the relations among them suggest that the noun may be a primitive organizer of written text.

  2. Part-Time Faculty Handbook.

    ERIC Educational Resources Information Center

    Hillsborough Community Coll., Tampa, FL.

    Policies, regulations, procedures, and general information are provided in this handbook designed to help orient new part-time faculty at Hillsborough Community College (HCC). After introductory material outlining the history of HCC and stressing the importance of the student in HCC's mission, the handbook describes HCC's evening and weekend…

  3. Playing It Safe: Part II.

    ERIC Educational Resources Information Center

    Penman, Kenneth A.; Niccolai, Frances R.

    1985-01-01

    Explains how to prevent outdoor sports injuries; discusses related litigation and specific cases involving playing field turf, tennis, skiing, and pools; and sets out facility design and maintenance considerations and recommendations. A sidebar provides information about injury insurance available to NCAA schools. Part I of this article appeared…

  4. Piecing Together a College Education behind Bars. Part One [and] Part Two [and] Part Three [and] Part Four.

    ERIC Educational Resources Information Center

    Taylor, Jon Marc

    2002-01-01

    This is a four-part article on how to earn a college degree from inside prison. The author, who earned his master's while in prison, argues that education offers prisoners the best chance of staying out of prison after their release, as well as qualifying them for a decent job and easing social reintegration. The author outlines the approaches…

  5. Laserdisk Directory--Part 3.

    ERIC Educational Resources Information Center

    Connolly, Bruce

    1986-01-01

    Presents third installment of directory published in four parts in June and August issues of "Database" and July and September "Online." Description, company, compatibility, type of laserdisk, search and retrieval software, interface with magnetic media, conditions of usage, price, and status information are given for 11 products. Company names…

  6. Laserdisk Directory--Part 2.

    ERIC Educational Resources Information Center

    Connolly, Bruce

    1986-01-01

    Second installment of directory published in four parts in "Database" (June and August) and "Online" (July and September) provides descriptions of 17 laserdisk products together with information on the producer, compatibility, type of laserdisk, search and retrieval software, interface with magnetic media, conditions of usage, price, and status.…

  7. Laserdisk Directory--Part 1.

    ERIC Educational Resources Information Center

    Connolly, Bruce, Comp.

    1986-01-01

    This first installment of four-part "Online/Database Laserdisk Directory" reports on aspects of laserdisks including: product name; product description; company name; conpatibility information; type of laserdisk (compact disc read-only-memory, videodisk); software used; interface with magnetic media capability; conditions of usage; price;…

  8. Laserdisk Directory--Part 5.

    ERIC Educational Resources Information Center

    Connolly, Bruce

    1986-01-01

    This continuation of the previously published four part directory reports information on several additional laserdisk databases and provides updates on some of those included in the original listing. Included in the product descriptions are producers; compatibility; type of laserdisk; software; interface with magnetic media; conditions of usage;…

  9. OCCUPATIONS FOR YOU, PART ONE.

    ERIC Educational Resources Information Center

    DES ROCHES, DEAN L.

    DEVELOPED AS PART OF A CURRICULUM PROJECT DESCRIBED IN VT 004 454 TO HELP YOUNG PEOPLE LEARN BASIC PRINCIPLES AND CONCEPTS OF MECHANICS AND TECHNOLOGY, THIS BOOK WAS DESIGNED TO STIMULATE INTEREST AND ANSWER QUESTIONS ABOUT VOCATIONAL CHOICE, STIMULATE INTEREST IN READING, AND PROVIDE CONTENT TO RELATE TO ACADEMIC STUDY. THE MATERIALS DEVELOPED IN…

  10. Hydroforming of flanged tubular part

    SciTech Connect

    Joo, B. D.; Jang, J. H.; Choi, M. K.; Moon, Y. H.

    2010-06-15

    Tube hydroforming is the technology that utilizes hydraulic pressure to form a tube into desired shapes inside die cavities. Recently, tube hydroforming technology draws attentions of automotive industries due to its advantages such as weight reduction, increased strength, improved quality and reduced tooling cost. Hydroformed automotive parts used as structural components in vehicle body frame or subframe often have to be structurally joined at some point. Therefore it is useful if the hydroformed automotive parts can be given a localized attachment flange. In this study, a tube hydroformed product which has flange has been formed at various processing conditions. To accomplish successful flange hydroforming process, thorough investigation on proper combination of process parameters such as internal hydraulic pressure and tool geometry has been performed. For the process design FE analysis was performed with Dynaform 5.5. With optimized die parting angle and circumferential expansion ratio, hydroforming experiments to form flange were performed and forming characteristics at various process conditions were analyzed. The results show that flanged parts can be successfully produced by tube hydroforming process.

  11. Laserdisk Directory--Part 4.

    ERIC Educational Resources Information Center

    Connolly, Bruce

    1986-01-01

    Fourth installment of a directory published in four parts in "Database" (June and August) and "Online" (July and September) provides descriptions of 12 laserdisk products together with information on the producer, compatibility, type of laserdisk, search and retrieval software, interface with magnetic media, conditions of usage, price, and status.…

  12. Death: A Part of Life.

    ERIC Educational Resources Information Center

    Otero, George G.; Harris, Zoanne

    This two-part curriculum unit includes 20 slides depicting Days of the Dead in Mexico and the United States. The unit is designed to help middle school students compare customs and practices associated with death throughout the world in a way that promotes understanding of the values and needs that produce and are reinforced by death rituals and…

  13. Fabrication of polyetheretherketone (PEEK) parts

    SciTech Connect

    Nelson, R.W.

    1991-12-01

    A literature search was conducted for polyetheretherketone (PEEK) thermoplastic to investigate its physical properties and molding applications. Simple molds were designed, built, and tested using PEEK molding compound. Molding parameters and shrink factors were determined. Physical properties varied with the percent of crystalline PEEK present. Annealing the molded parts enhanced their physical properties and increased the percent crystallinity. 11 refs.

  14. The PC Connection Part III.

    ERIC Educational Resources Information Center

    Chu, David L.; Zilora, Karen S.

    1986-01-01

    Presents a series of four applications of data acquisition, system control, and data analysis using personal computers. Covers topics of pilot plant information and control, automation of drug safety evaluation, analysis and characterization of petroleum resources, and high-speed analog-digital conversion connections. Part three of a series on…

  15. Local Area Networks: Part II.

    ERIC Educational Resources Information Center

    Dessy, Raymond E., Ed.

    1982-01-01

    Discusses five approaches used by industry/colleges to provide local area network (LAN) capabilities in the analytical laboratory: (1) mixed baseband bus network coupled to a star net; (2) broadband bus network; (3) ring network; (4) star network coupled to broadband net; and (5) simple multiprocessor center. Part I (September issue) focused on…

  16. Part-Time Faculty Handbook.

    ERIC Educational Resources Information Center

    College of the Mainland, Texas City, TX.

    This document contains comprehensive information designed to orient the part-time faculty member to the College of the Mainland. Information included in the handbook covers the history and philosophy of the college; student and instructor rights; a description of social and economic characteristics of the students; a description of the faculty;…

  17. Cleaning of parts for new manufacturing and parts rebuilding

    NASA Astrophysics Data System (ADS)

    Doherty, Jeff

    1994-06-01

    Parts cleaning is the largest single expense, and the most time consuming activity, in rebuilding and new manufacturing. On average, 25% to 40% of the total labor and overhead burden is spent on cleaning. EPA and OSHA pressures add to the burden by making some methods and chemicals obsolete. Some of the processes and chemicals in current use will be curtailed and or outlawed in the future. How can a shops and industries make long term decisions or capital investments in cleaning and process improvements when the government keeps changing its rules? At the MART Corporation in Saint Louis, Missouri, we manufacture a line of cabinet-style batch cleaning machines known as Power Washers. Twenty years ago MART invented and patented the Power Washer process, a cleaning method that recycles wash solution and blasts contaminates as they are washed off the more heavily contaminated parts. Since the initial invention MART has continued to R&D the washing process and develop ancillary systems that comply with EPA and OSHA regulations. For applications involving new industrial parts or items requiring specification cleaned surfaces. MART provides filtration and solution conditioning systems, part drying operations, and triple rinsing. Units are available in stainless steel or higher alloys. We are not alone in the washer manufacturing business. You have many choices of cleaning solutions (no pun intended) which will perform in your operations and yield good results. As a manufacturer, we are interested in your success with our equipment. We have all heard the horror stories of companies having selected inappropriate cleaning systems and or processes which then brought the company to its knees, production wise. Assembly, appearance, warranty, and performance shortcomings of finished products can often be directly related to the cleaning process and its shortcomings.

  18. Getting in Taped, Part I and Part II

    ERIC Educational Resources Information Center

    Cundy, H. M.; Higgins, J.

    1971-01-01

    This article is in two parts: discussion of mathematical concepts involved in converting the reading from the tape-recorder counter which counts the turns of the run-off spool to that from the counter which counts turns of the take-up spool; calculating the length of tape run off when given the reading from the tape-recorder counter of the run-off…

  19. Modernizing medical photography, part 1.

    PubMed

    Crompton, Paul

    2004-12-01

    Government, media and public focus on waiting times in the National Health Service in the United Kingdom has forced the organization to look closely at the process by which a patient progresses through an increasingly complex and ever changing system. In an effort to streamline the patient journey or care pathway, modernizers have turned to business and manufacturing for solutions. Whilst medical photographers need to recognize their role in this context, they are also facing major technological modernization through the development of digital photography. Part 1 of this paper looks at the origins of some of the techniques presently being used to modernize the patient journey. Part 2 shows how these tools of modernization can be utilized to harness the advantages of digital technology to provide a modern and appropriate medical photography service in a large, disparate teaching hospital.

  20. Modernizing medical photography, part 2.

    PubMed

    Crompton, Paul

    2005-03-01

    Part 1 of this paper explored the origins of process activity mapping, one of the major tools currently being used to modernize patient pathways in the National Health Service in Great Britain. Within medical photography the current notion of modernization is inextricably linked to the development of digital technology. Whilst the core principle of capturing light on a sensitive medium remains as clear and relevant as ever, the mechanisms by which the image is processed and presented to the client have changed profoundly. Part 2 shows how the principles of lean thinking and process activity mapping can be utilized to harness the advantages of digital technology to provide a modern and appropriate medical photography service in a large disparate teaching hospital.

  1. The Inconvenient Truth. Part 2

    SciTech Connect

    Athanasiou, T.

    2007-01-15

    Essay-type of publication on what should happen next after Al Gore's presentations on the Inconvenient Truth about the impacts of climate change. The essay states in the first lines: 'We've seen the movie, so we know the first part - we're in trouble deep. And it's time, past time, for at least some of us to go beyond warning to planning, to start talking seriously about a global crash program to stabilize the climate.

  2. The digestive system: part 2.

    PubMed

    Hendry, Charles; Farley, Alistair; McLafferty, Ella; Johnstone, Carolyn

    This article, which forms part of the life sciences series and is the second of two articles on the digestive system, explores the structure and function of the liver, gall bladder and pancreas. It is important that nurses understand how the digestive system works and identify its role in maintaining health. The gross structures of the liver, gall bladder and pancreas associated with the gastrointestinal tract are described, along with relevant physiology and pathologies.

  3. 14 CFR 27.602 - Critical parts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Critical parts. 27.602 Section 27.602 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction General § 27.602 Critical parts. (a) Critical part. A critical part is a part,...

  4. 14 CFR 29.602 - Critical parts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Critical parts. 29.602 Section 29.602 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction General § 29.602 Critical parts. (a) Critical part. A critical part is a part,...

  5. Automated Cutting And Drilling Of Composite Parts

    NASA Technical Reports Server (NTRS)

    Warren, Charles W.

    1993-01-01

    Proposed automated system precisely cuts and drills large, odd-shaped parts made of composite materials. System conceived for manufacturing lightweight composite parts to replace heavier parts in Space Shuttle. Also useful in making large composite parts for other applications. Includes robot locating part to be machined, positions cutter, and positions drill. Gantry-type robot best suited for task.

  6. X-pinch. Part I

    SciTech Connect

    Pikuz, S. A. Shelkovenko, T. A.; Hammer, D. A.

    2015-04-15

    Results of experimental studies of the X-pinch since its invention and implementation in 1982 at the Lebedev Physical Institute are presented. The concept of the X-pinch arose in the course of innovative experiments on studying the generation of hot dense plasma in nanosecond Z-pinches. The main idea was to localize the region occupied by the plasma and stabilize the moment of its formation. This was achieved by using a load in the form of crossed wires. The resulting plasma object turned out to be so interesting that a new scientific direction appeared in plasma physics. At present, studies in this direction are being performed in many laboratories worldwide. The term X-pinch became conventional, and sections devoted to its study are always present at plasma conferences. X-pinch is not only a very interesting scientific object, but also a unique source of X-ray emission with extreme parameters. The use of X-pinches for point-projection X-ray radiography of high-energy-density objects provided many new experimental results. In some cases, the concepts of the processes occurring in matter upon fast energy deposition changed dramatically. The review consists of two parts. The first part briefly outlines the history of creation and studies of X-pinches, describes the diagnostic techniques and devices developed during these studies, and presents the main results obtained in studying the physical processes occurring in the X-pinch. The second part is devoted to the results of detailed studies of the X-pinch hot spot—the region where the highest plasma parameters are achieved and which is a source of X-ray emission with extreme parameters. Some results of X-pinch simulations are also presented.

  7. X-pinch. Part I

    NASA Astrophysics Data System (ADS)

    Pikuz, S. A.; Shelkovenko, T. A.; Hammer, D. A.

    2015-04-01

    Results of experimental studies of the X-pinch since its invention and implementation in 1982 at the Lebedev Physical Institute are presented. The concept of the X-pinch arose in the course of innovative experiments on studying the generation of hot dense plasma in nanosecond Z-pinches. The main idea was to localize the region occupied by the plasma and stabilize the moment of its formation. This was achieved by using a load in the form of crossed wires. The resulting plasma object turned out to be so interesting that a new scientific direction appeared in plasma physics. At present, studies in this direction are being performed in many laboratories worldwide. The term X-pinch became conventional, and sections devoted to its study are always present at plasma conferences. X-pinch is not only a very interesting scientific object, but also a unique source of X-ray emission with extreme parameters. The use of X-pinches for point-projection X-ray radiography of high-energy-density objects provided many new experimental results. In some cases, the concepts of the processes occurring in matter upon fast energy deposition changed dramatically. The review consists of two parts. The first part briefly outlines the history of creation and studies of X-pinches, describes the diagnostic techniques and devices developed during these studies, and presents the main results obtained in studying the physical processes occurring in the X-pinch. The second part is devoted to the results of detailed studies of the X-pinch hot spot—the region where the highest plasma parameters are achieved and which is a source of X-ray emission with extreme parameters. Some results of X-pinch simulations are also presented.

  8. Occlusal disease revisited: Part II.

    PubMed

    Lytle, J D

    2001-06-01

    In part I of this article, the evolution of bruxism from childhood was discussed. Further, the different types of anterior tooth wear were reviewed. Specifically, the type of wear noted in bruxed-braced or cross-over position was pointed out. Examples were illustrated to allow the practitioner to recognize the type of parafunction in advance of treatment. This article will continue the discussion of cross over with moderate to extreme examples. Suggestions for treatment are discussed depending on the severity of the problem. Restorative failure and the implications for implant dentistry are noted. PMID:11490404

  9. Genetic parts to program bacteria.

    PubMed

    Voigt, Christopher A

    2006-10-01

    Genetic engineering is entering a new era, where microorganisms can be programmed using synthetic constructs of DNA encoding logic and operational commands. A toolbox of modular genetic parts is being developed, comprised of cell-based environmental sensors and genetic circuits. Systems have already been designed to be interconnected with each other and interfaced with the control of cellular processes. Engineering theory will provide a predictive framework to design operational multicomponent systems. On the basis of these developments, increasingly complex cellular machines are being constructed to build specialty chemicals, weave biomaterials, and to deliver therapeutics.

  10. How parts make up wholes

    PubMed Central

    Findlay, Scott D.; Thagard, Paul

    2012-01-01

    We propose a schema that characterizes how parts constitute wholes at diverse levels of organization, ranging from the atomic to the biological to the social. This schema of tags, organizers, attachers, and communicators provides a unified understanding of the structure, function, and dynamics of organization in physics, biology, and the cognitive and social sciences. We use this schema to identify and describe structures and processes at many levels of organization, and discuss its relevance for understanding the nature of constitution and emergence, especially the relation between individual humans and the social groups they constitute. PMID:23227011

  11. Understanding Radiation Thermometry. Part I

    NASA Technical Reports Server (NTRS)

    Risch Timothy K.

    2015-01-01

    This document is a two-part course on the theory and practice of radiation thermometry. Radiation thermometry is the technique for determining the temperature of a surface or a volume by measuring the electromagnetic radiation it emits. This course covers the theory and practice of radiative thermometry and emphasizes the modern application of the field using commercially available electronic detectors and optical components. The course covers the historical development of the field, the fundamental physics of radiative surfaces, along with modern measurement methods and equipment.

  12. The Sum of its Parts

    NASA Astrophysics Data System (ADS)

    Spriggs, John

    A safety case is a collation of the arguments and supporting evidence needed to demonstrate that an item is safe to use. Although there are regulatory and legislative requirements in some industries, and in some parts of the world, for the production of a safety case, there are few standard definitions of what should go into one. Indeed, there is no single, correct, way to prepare a safety case; but this should not be surprising, given the wide variety of applications to which they are put.

  13. Understanding Radiation Thermometry. Part II

    NASA Technical Reports Server (NTRS)

    Risch, Timothy K.

    2015-01-01

    This document is a two-part course on the theory and practice of radiation thermometry. Radiation thermometry is the technique for determining the temperature of a surface or a volume by measuring the electromagnetic radiation it emits. This course covers the theory and practice of radiative thermometry and emphasizes the modern application of the field using commercially available electronic detectors and optical components. The course covers the historical development of the field, the fundamental physics of radiative surfaces, along with modern measurement methods and equipment.

  14. The digestive system: part 1.

    PubMed

    Johnstone, Carolyn; Hendry, Charles; Farley, Alistair; McLafferty, Ella

    This article, which forms part of the life sciences series and is the first of two articles on the digestive system, explores the structure and function of the digestive system. It is important that nurses understand how the digestive system works and its role in maintaining health. The article describes the gross structure of the gastrointestinal tract along with relevant physiology. It also outlines several disorders of the gastrointestinal tract and their treatment and nursing management. The second article will explain the liver, pancreas and gall bladder and their digestive functions, and provides a brief overview of the disorders of chronic liver disease, pancreatitis and gallstones.

  15. NASA EEE Parts 2014 Year in Review

    NASA Technical Reports Server (NTRS)

    Lee, Sara-Anne

    2015-01-01

    The NASA Electronic Parts and Packaging Program continue to support Electrical, Electronic and Electromagnetic Parts for the agency with an eventful year of workshops, innovations, testing and challenges.

  16. Standards in neurosonology. Part II

    PubMed Central

    Tomczyk, Tomasz; Luchowski, Piotr; Kozera, Grzegorz; Kaźmierski, Radosław; Stelmasiak, Zbigniew

    2016-01-01

    The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specific brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler). Part II and III are devoted to standards for specific clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-to-left shunts, confirmation of the arrest of the cerebral circulation, an assessment of the functional efficiency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity). PMID:27104002

  17. Future Jet Technologies, Part C

    NASA Astrophysics Data System (ADS)

    Gal-Or, Benjamin

    2013-06-01

    This updated, PART C REVIEW, covers the dangerous global spread of JS-stealth, drone technology [1-91], canard-free, stealth, new agile drones and the highly debated, 480 billion F-35 International Program as reported on March 13, 2013 to the U.S. Congress [92]. Due to serious design issues, spiraling high costs and years in delays, alternatives are analyzed here, depicted and proposed, mainly from the propulsion-design point of view. These include fleets of low-cost, stealth, jet-steered-drones mixed with non-stealthy, low-cost, ready-to-be-delivered, U.S. or European or Russian fighter aircraft. Can a few F-35s win against large fleets of stealth agile drones? To understand the dangers and critical issues involved, the author's own, past classified information is partly disclosed, while resorting to images in Figs. 2(a) and 2(b) taken from his book [2] and from Wikipedia, the "Free Encyclopedia", in all other images.

  18. Standards in neurosonology. Part III.

    PubMed

    Wojczal, Joanna; Tomczyk, Tomasz; Luchowski, Piotr; Kozera, Grzegorz; Kaźmierski, Radosław; Stelmasiak, Zbigniew

    2016-06-01

    The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specific brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler). Part II and III are devoted to standards for specific clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-to-left shunts, confirmation of the arrest of the cerebral circulation, an assessment of the functional efficiency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity). PMID:27446600

  19. Standards in neurosonology. Part III

    PubMed Central

    Tomczyk, Tomasz; Luchowski, Piotr; Kozera, Grzegorz; Kaźmierski, Radosław; Stelmasiak, Zbigniew

    2016-01-01

    The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specific brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler). Part II and III are devoted to standards for specific clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-to-left shunts, confirmation of the arrest of the cerebral circulation, an assessment of the functional efficiency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity). PMID:27446600

  20. Standards in neurosonology. Part III.

    PubMed

    Wojczal, Joanna; Tomczyk, Tomasz; Luchowski, Piotr; Kozera, Grzegorz; Kaźmierski, Radosław; Stelmasiak, Zbigniew

    2016-06-01

    The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specific brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler). Part II and III are devoted to standards for specific clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-to-left shunts, confirmation of the arrest of the cerebral circulation, an assessment of the functional efficiency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity).

  1. Standards in neurosonology. Part I.

    PubMed

    Wojczal, Joanna; Tomczyk, Tomasz; Luchowski, Piotr; Kozera, Grzegorz; Kaźmierski, Radosław; Stelmasiak, Zbigniew

    2015-09-01

    The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specific brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler). Part II and III are devoted to standards for specific clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-toleft shunts, confirmation of the arrest of the cerebral circulation, an assessment of the functional efficiency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity).

  2. Standards in neurosonology. Part II.

    PubMed

    Wojczal, Joanna; Tomczyk, Tomasz; Luchowski, Piotr; Kozera, Grzegorz; Kaźmierski, Radosław; Stelmasiak, Zbigniew

    2016-03-01

    The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specific brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler). Part II and III are devoted to standards for specific clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-to-left shunts, confirmation of the arrest of the cerebral circulation, an assessment of the functional efficiency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity).

  3. Revenue cycle management, Part II.

    PubMed

    Crew, Matt

    2007-01-01

    The proper management of your revenue cycle requires the application of "best practices" and the continual monitoring and measuring of the entire cycle. The correct technology will enable you to gain the insight and efficiencies needed in the ever-changing healthcare economy. The revenue cycle is a process that begins when you negotiate payor contracts, set fees, and schedule appointments and continues until claims are paid in full. Every single step in the cycle carries equal importance. Monitoring all phases and a commitment to continually communicating the results will allow you to achieve unparalleled success. In part I of this article, we explored the importance of contracting, scheduling, and case management as well as coding and clinical documentation. We will now take a closer look at the benefits charge capture, claim submission, payment posting, accounts receivable follow-up, and reporting can mean to your practice.

  4. Forming parts over small radii

    NASA Astrophysics Data System (ADS)

    Hazra, S. K.; Hughes, D. J.; Pereira, M. P.; Rolfe, B. F.

    2016-08-01

    Stamping simulations usually make the plane stress simplifying assumption. However, this becomes less valid when material draws around features with radius to sheet thickness ratios less than 20. Pereira, Yan & Rolfe (Wear, Vol.265, p.1687 (2008)) predicted that out-of-plane stress equivalent to material yield can occur because a line contact forms briefly at the start of the draw process. The high transient stress can cause high rates of tool wear and may cause the ‘die impact line’ cosmetic defect. In this work, we present residual strain results of a channel section that was drawn over a small radius. Using the neutron source at the Institut Laue-Langevin, in-plane and out-of-plane strains were measured in the channel part to show some support for the conclusions of Pereira et. al.

  5. Holding Irregularly Shaped Parts For Machining

    NASA Technical Reports Server (NTRS)

    Hilton, Burt W.; Wilson, Rick R.

    1988-01-01

    Part with complicated, irregular outside contours clamped for precise machining of internal passages with aid of simple method. Exterior of part cast in Rigidex, or equivalent epoxy. Forms wall to be clamped. Interior of part machined to finish of 125 microinches or finer. When machining finished, epoxy melted away by heating part to 200 degree F.

  6. 30 CFR 33.38 - Electrical parts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Electrical parts. 33.38 Section 33.38 Mineral... § 33.38 Electrical parts. (a) Units with electrical parts and designed to operate as electric face... which is Schedule 2F), and the examination and testing of the electrical parts shall be...

  7. Method of forming and assembly of parts

    DOEpatents

    Ripley, Edward B.

    2010-12-28

    A method of assembling two or more parts together that may be metal, ceramic, metal and ceramic parts, or parts that have different CTE. Individual parts are formed and sintered from particles that leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled, sintered parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

  8. JPL preferred parts list: Reliable electronic components

    NASA Technical Reports Server (NTRS)

    Covey, R. E.; Scott, W. R.; Hess, L. M.; Steffy, T. G.; Stott, F. R.

    1982-01-01

    The JPL Preferred Parts List was prepared to provide a basis for selection of electronic parts for JPL spacecraft programs. Supporting tests for the listed parts were designed to comply with specific spacecraft environmental requirements. The list tabulates the electronic, magnetic, and electromechanical parts applicable to all JPL electronic equipment wherein reliability is a major concern. The parts listed are revelant to equipment supplied by subcontractors as well as fabricated at the laboratory.

  9. Management of a coordinated parts program

    NASA Technical Reports Server (NTRS)

    Krishnan, G. S.

    1997-01-01

    The organization of the management of a parts program is discussed. The organizational structure faced by the parts manager and the advantages and disadvantages of managing a coordinated parts program are analyzed. The reliable operation of an instrument is the key to the success of the mission, together with the management of the parts program. The analysis led to the conclusion that the setting up of the decision support model will aid the parts manager in the decision making and the process control.

  10. Correcting Part-Time Misconceptions. Policy Watch.

    ERIC Educational Resources Information Center

    Employment Policies Inst., Washington, DC.

    Part-time workers are those working fewer than 35 hours per week. Of the 113 million wage and salary workers in the labor force, only 17 percent are classified as part time. Four of five part-time workers choose to work part-time rather than full-time. The 3.8 million involuntary part-time workers constitute only 3.4 percent of the work force.…

  11. Sports Concussion Management: part II.

    PubMed

    Terrell, Thomas R; Cox, Conrad B; Bielak, Ken; Casmus, Robert; Laskowitz, Daniel; Nichols, Gregory

    2014-02-01

    Millions of concussions occur every year in the United States. The public interest in concussion has increased after a number of high-profile deaths in high school athletes from sports-related head trauma and in some professional athletes from chronic traumatic encephalopathy. One of the most active areas of research in sports medicine during the last decade has been the evaluation and management of concussion. In this second article of a two-part series, we provide an overview of the latest scientific advances in concussion research. This overview includes an update on the pathobiological changes that occur during concussion and the results of biomechanical studies. In addition, to aid the practicing clinician, we review the literature on proven and currently studied concussion risk factors, including a history of concussion, fatigue, and age. Genetic polymorphisms and biomarkers may provide risk-prediction capability, but at present the research remains inconclusive. Diffusion tensor imaging and functional magnetic resonance imaging are promising technologies that reveal more sophisticated data about the impact of concussion on the brain. We review the existing literature on the application of these neuroimaging modalities to sports concussion. An update from the Fourth International Conference on Concussion in Sport, with highlights of new recommendations, and the presentation of the third edition of the Sports Concussion Assessment Tool to evaluate acute concussion, concludes our review.

  12. Commercial Parts Technology Qualification Processes

    NASA Technical Reports Server (NTRS)

    Cooper, Mark S.

    2013-01-01

    Many high-reliability systems, including space systems, use selected commercial parts (including Plastic Encapsulated Microelectronics or PEMs) for unique functionality, small size, low weight, high mechanical shock resistance, and other factors. Predominantly this usage is subjected to certain 100% tests (typically called screens) and certain destructive tests usually (but not always) performed on the flight lot (typically called qualification tests). Frequently used approaches include those documented in EEE-INST-002 and JPL DocID62212 (which are sometimes modified by the particular aerospace space systems manufacturer). In this study, approaches from these documents and several space systems manufacturers are compared to approaches from a launch systems manufacturer (SpaceX), an implantable medical electronics manufacturer (Medtronics), and a high-reliability transport system process (automotive systems). In the conclusions section, these processes are outlined for all of these cases and presented in tabular form. Then some simple comparisons are made. In this introduction section, the PEM technology qualification process is described, as documented in EEE-INST-002 (written by the Goddard Space Flight Center, GSFC), as well as the somewhat modified approach employed at the Jet Propulsion Laboratory (JPL). Approaches used at several major NASA contractors are also described

  13. Range Imaging without Moving Parts

    NASA Technical Reports Server (NTRS)

    Blair, J. Bryan; Scott, V. Stanley, III; Ramos-Izquierdo, Luis

    2008-01-01

    Range-imaging instruments of a type now under development are intended to generate the equivalent of three-dimensional images from measurements of the round-trip times of flight of laser pulses along known directions. These instruments could also provide information on characteristics of targets, including roughnesses and reflectivities of surfaces and optical densities of such semi-solid objects as trees and clouds. Unlike in prior range-imaging instruments based on times of flight along known directions, there would be no moving parts; aiming of the laser beams along the known directions would not be accomplished by mechanical scanning of mirrors, prisms, or other optical components. Instead, aiming would be accomplished by using solid-state devices to switch input and output beams along different fiber-optic paths. Because of the lack of moving parts, these instruments could be extraordinarily reliable, rugged, and long-lasting. An instrument of this type would include an optical transmitter that would send out a laser pulse along a chosen direction to a target. An optical receiver coaligned with the transmitter would measure the temporally varying intensity of laser light reflected from the target to determine the distance and surface characteristics of the target. The transmitter would be a combination of devices for generating precise directional laser illumination. It would include a pulsed laser, the output of which would be coupled into a fiber-optic cable with a fan-out and solid-state optical switches that would enable switching of the laser beam onto one or more optical fibers terminated at known locations in an array on a face at the focal plane of a telescope. The array would be imaged by the telescope onto the target space. The receiver optical system could share the aforementioned telescope with the transmitter or could include a separate telescope aimed in the same direction as that of the transmitting telescope. In either case, light reflected

  14. [First part: the intestinal microbiota].

    PubMed

    Capurso, Lucio

    2016-06-01

    The human gastrointestinal tract contains a large number of commensal (non pathogenic) and pathogenic microbial species that have co-evolved with the human genome and differ in composition and function based on their location, as well as age, sex, race/ethnicity, and diet of their host and we can in fact consider the human body as a mix of human and bacterial cells. It is now evident that the large intestine is much more than an organ for waste material and absorption of water, salts and drugs, and indeed has a very important impact on human health, for a major part related to the specific composition of the complex microbial community in the colon. In man, the large gut receives material from the ileum which has already been digested and the contents are then mixed and retained for 6-12 hours in the caecum and right colon. Thus, the large intestine is an open system, with nutrients flowing in the caecum, and bacteria, their metabolic products, and undigested foodstuffs being excreted as faeces. The anaerobic brakdown of carbohydrate and protein by bacteria is known conventionally as fermentation. In man the major end products are the short-chain fatty acids (SCFA) acetate, propionate, butirate, the gases H2 and CO2, ammonia, amines, phenols and energy, which the bacteria use for growth and the maintenance of cellular function. The microbiota is also an important factor in the development of the immune response. The interaction between the gastrointestinal tract and resident microbiota is well balanced in healthy individuals, but its breakdown can lead to intestinal and extraintestinal disease. PMID:27362717

  15. 34 CFR Appendix E to Part 300 - Index for IDEA-Part B Regulations (34 CFR Part 300)

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Index for IDEA-Part B Regulations (34 CFR Part 300) E... B Regulations (34 CFR Part 300) ACCESS TO • Access rights (Parents) 300.613. • Assistive technology....115. ALTERNATIVE STRATEGIES to meet transition objectives 300.324(c)(1). AMENDMENTS • To LEA...

  16. 34 CFR Appendix E to Part 300 - Index for IDEA-Part B Regulations (34 CFR Part 300)

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 2 2014-07-01 2013-07-01 true Index for IDEA-Part B Regulations (34 CFR Part 300) E... B Regulations (34 CFR Part 300) ACCESS TO • Access rights (Parents) 300.613. • Assistive technology... services 300.300(b). CONSENT (J-Z) • Not required: Ο Before administering a test or other evaluation to...

  17. 34 CFR Appendix E to Part 300 - Index for IDEA-Part B Regulations (34 CFR Part 300)

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 2 2013-07-01 2013-07-01 false Index for IDEA-Part B Regulations (34 CFR Part 300) E... B Regulations (34 CFR Part 300) ACCESS TO • Access rights (Parents) 300.613. • Assistive technology... services 300.300(b). CONSENT (J-Z) • Not required: Ο Before administering a test or other evaluation to...

  18. 34 CFR Appendix E to Part 300 - Index for IDEA-Part B Regulations (34 CFR Part 300)

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 2 2012-07-01 2012-07-01 false Index for IDEA-Part B Regulations (34 CFR Part 300) E... B Regulations (34 CFR Part 300) ACCESS TO • Access rights (Parents) 300.613. • Assistive technology... assessments 300.320(a)(6)(i). • State level activities in support of 300.704(b)(4)(x). ACT (Definition)...

  19. 34 CFR Appendix E to Part 300 - Index for IDEA-Part B Regulations (34 CFR Part 300)

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 2 2011-07-01 2010-07-01 true Index for IDEA-Part B Regulations (34 CFR Part 300) E... B Regulations (34 CFR Part 300) ACCESS TO • Access rights (Parents) 300.613. • Assistive technology... assessments 300.320(a)(6)(i). • State level activities in support of 300.704(b)(4)(x). ACT (Definition)...

  20. Part I. Layered Double Hydroxides

    NASA Astrophysics Data System (ADS)

    Dimotakis, Emmanuel Dimitrios

    A new general method for the preparation of well -ordered layered double hydroxides (LDHs), (Mg_ {rm 1-x}Al_{ rm x} (OH)_2) (X^{rm n-}) _{rm n/x}{cdot}yH _2O, interlayered by organic anions has been developed. It is based on the reaction of meixnerite, (Mg_3Al(OH)_8) (OH) cdot2H_2O, with the free acid form of the desired anion--using glycerol as a swelling agent--to yield single crystalline products that are not readily available by conventional synthetic methods. The (Mg_3Al(OH) _8) -adipate and -p-toluenesulfonate derivatives undergo facile ion exchange reactions with Keggin-type (XM_{12}O_ {40}) ^{rm n -} or lacunary (XM_{11 }O_{39}) ^{rm m-} polyoxometalates (POMs) to form well-ordered, microporous pillared derivatives with the highest N_2 BET surface areas reported to date, namely 107 and 155 m^2 /g, respectively. Meixnerite, (Mg_3Al(OH) _8) (OH) cdot2H _2O, has unexpectedly been found to undergo similar ion exchange reactions, in a topotactic way, with retention of the structure of the intercalated POMs. The meixnerite was conveniently prepared for the first time from calcination of (Mg_3Al(OH) _8) (CO_3) _{0.5}{cdot}2H _2O and aqueous hydrolysis of the resulting NaCl-type solid solution. Metal carbonyl clusters have also been examined for ion-exchange (i.e., { (Pt _3(CO)_6) _{rm n}}^ {2-}) in these LDH-precursors. This chemistry is compared with the surface chemistry of (Mg_3 Al(OH)_8) (X^ {rm n-}) _{ rm 1/n}{cdot}2H _2O (X = CO_3^{2 -} or OH^{-}). It has been shown that the surface hydrolysis reaction: CO _3^{2-} + H _2O longrightarrow HCO_3^{-} + OH ^-, causes reductive condensation reactions of neutral carbonyl clusters with the LDH. The reactions were as efficient as with Na metal in solution. In part II of this work, Li-fluorohectorite, has been pillared with titanium polyoxocations derived from the acidic hydrolysis of TiCl_4 or Ti(i-OC_3H_7) _4. Raman spectroscopy of the product indicates that the pillars have a structure analogous to TiO_2(B) phase

  1. Electroplated "cold patch" for critical parts

    NASA Technical Reports Server (NTRS)

    Tripp, H. A.

    1979-01-01

    Cracks in metal parts are filled by electrodeposition in plating tank that conforms to part to be repaired. Principle is applicable to repair of cracks in components of chemical reactors and other critical structures.

  2. Culturally and linguistically responsive teaching: part II.

    PubMed

    Billings, Diane M

    2015-03-01

    This part II of a two-part article about culturally and linguistically responsive teaching provides suggestions for evaluating learners who are culturally and linguistically diverse (CALD) and are often under-represented in nursing education settings.

  3. Voice Teachers on Voice, Part 3

    ERIC Educational Resources Information Center

    Gollobin, Laurie Brooks; White, Harvey

    1978-01-01

    Concludes a three-part symposium with eight prominent voice teachers on voice teaching methods. In this part, the teachers discuss placement, voice breaks, tone deafness, covered tone, and developing volume and offer some final general comments. (Editor)

  4. Talking about the Weather, Part II.

    ERIC Educational Resources Information Center

    Gibb, Allan A.

    1984-01-01

    This second part of a two-part article highlights some mathematics involved in the study of meteorology. Examples are given of the application of mathematics to the study of the atmosphere, with three problems discussed. (MNS)

  5. Panorámica del proyecto CLASSy

    NASA Astrophysics Data System (ADS)

    Fernández López, M.; Arce, H. G.; Looney, L.; Mundy, L. G.; Storm, S.; Lee, K. I.; Teuben, P.; CLASSy Team

    2015-08-01

    The CARMA Large Area Star-formation Survey (CLASSy) is a CARMA Key Project which is mapping 5 fields covering about 150 square-arcminutes each in the Perseus (3 fields) and Serpens (2 fields) Molecular Clouds. CLASSy consists of 3 mm interferometric observations with angular resolution, being sensitive to spatial scales between 1000 AU to 3 pc. Particularly, the analysis of the NH(1-0) molecular emission from the filamentary structures found in these star--forming regions constrain theoretical models explaining their origin and evolution. Gas kinematics observations show velocity gradients that suggest possible explanations on how filaments are formed. In addition, from the analysis of the kinematics we carried out a pioneer study of the turbulence in these clouds.

  6. Proyecto Del Progreso De La Mujer.

    ERIC Educational Resources Information Center

    Flores, Oralia T.

    1979-01-01

    Women farmworkers and staff members of farmworker organizations revealed barriers (e.g. lack of education, training, transportation, family responsibility, spouse's cooperation) that limit women's participation in all levels of farmworker organizational structure. Available from Farmworker Data Network, 7905 W. 44th, Wheat Ridge, Colorado 80033…

  7. Proyectos de Educacion Migrante (Migrant Education Projects).

    ERIC Educational Resources Information Center

    Gonzalez, Ramon; Garcia, Jose D.

    Written in Spanish and English for project personnel, parents, and others interested in migrant education, the booklet summarizes general concepts and requirements behind Title I-Migrant activities in Oregon, which has been allocated $4,439,341 in Title I-Migrant funds for fiscal year 1980. Following brief definitions of important terms,…

  8. 31 CFR 501.101 - Relation of this part to other parts in this chapter.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... in this chapter. 501.101 Section 501.101 Money and Finance: Treasury Regulations Relating to Money..., PROCEDURES AND PENALTIES REGULATIONS Relation of This Part to Other Parts in This Chapter § 501.101 Relation of this part to other parts in this chapter. This part sets forth standard reporting...

  9. Legislation and Part-Time Employment.

    ERIC Educational Resources Information Center

    Petersen, Allan L.; And Others

    This document presents an analysis of part-time employment issues in California community colleges, including a review of historical developments of the law covering the employment of certificated personnel, a review of some benefits and problems associated with part-time teaching, and consideration of part-time faculty employment as a major issue…

  10. Saturated Vapour Pressure and Refrigeration - Part I

    ERIC Educational Resources Information Center

    Bunker, C. A.

    1973-01-01

    The first part of a two-part article describes an experimental approach that can be used in teaching the concept of saturated vapour pressure. This leads to a discussion of refrigeration cycles in the second part of the article. (JR)

  11. Using GPU shaders for visualization, part 3.

    PubMed

    Bailey, Mike

    2013-01-01

    GPU shaders aren't just for glossy special effects. Parts 1 and 2 of this discussion looked at using them for point clouds, cutting planes, line integral convolution, and terrain bump-mapping. Part 3 covers compute shaders and shader storage buffer objects-two features announced as part of OpenGL 4.3.

  12. Part C Updates. 11th Edition

    ERIC Educational Resources Information Center

    Danaher, Joan; Goode, Sue; Lazara, Alex

    2010-01-01

    "Part C Updates" is a compilation of information on various aspects of the Early Intervention Program for Infants and Toddlers with Disabilities (Part C) of the Individuals with Disabilities Education Act (IDEA). This is the eleventh volume in a series of compilations, which included two editions of Part H Updates, the former name of the program.…

  13. Expertise revisited, Part I-Interactional expertise.

    PubMed

    Collins, Harry; Evans, Robert

    2015-12-01

    In Part I of this two part paper we try to set out the 'essence' of the notion of interactional expertise by starting with its origins. In Part II we will look at the notion of contributory expertise. The exercise has been triggered by recent discussion of these concepts in this journal by Plaisance and Kennedy and by Goddiksen.

  14. Part C Updates: 9th Edition

    ERIC Educational Resources Information Center

    Danaher, Joan; Goode, Sue; Lazara, Alex

    2007-01-01

    "Part C Updates" is a compilation of information on various aspects of the Early Intervention Program for Infants and Toddlers with Disabilities (Part C) of the Individuals with Disabilities Education Act (IDEA). This is the ninth volume in a series of compilations, which included two editions of Part H Updates, the former name of the program.…

  15. Parts, Cavities, and Object Representation in Infancy

    ERIC Educational Resources Information Center

    Hayden, Angela; Bhatt, Ramesh S.; Kangas, Ashley; Zieber, Nicole

    2011-01-01

    Part representation is not only critical to object perception but also plays a key role in a number of basic visual cognition functions, such as figure-ground segregation, allocation of attention, and memory for shapes. Yet, virtually nothing is known about the development of part representation. If parts are fundamental components of object shape…

  16. 7 CFR 1206.14 - Part.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.14 Part. Part means part 1206 which includes the Mango Promotion, Research, and Information Order and all rules, regulations, and...

  17. 7 CFR 1206.14 - Part.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.14 Part. Part means part 1206 which includes the Mango Promotion, Research, and Information Order and all rules, regulations, and...

  18. 7 CFR 1206.14 - Part.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.14 Part. Part means part 1206 which includes the Mango Promotion, Research, and Information Order and all rules, regulations, and...

  19. 7 CFR 1206.14 - Part.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.14 Part. Part means part 1206 which includes the Mango Promotion, Research, and Information Order and all rules, regulations, and...

  20. 7 CFR 1206.14 - Part.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.14 Part. Part means part 1206 which includes the Mango Promotion, Research, and Information Order and all rules, regulations, and...

  1. Asmparts: assembly of biological model parts.

    PubMed

    Rodrigo, Guillermo; Carrera, Javier; Jaramillo, Alfonso

    2007-12-01

    We propose a new computational tool to produce models of biological systems by assembling models from biological parts. Our software not only takes advantage of modularity, but it also enforces standardisation in part characterisation by considering a model of each part. We have used model parts in SBML to design transcriptional networks. Our software is open source, it works in linux and windows platforms, and it could be used to automatically produce models in a server. Our tool not only facilitates model design, but it will also help to promote the establishment of a registry of model parts.

  2. Asmparts: assembly of biological model parts

    PubMed Central

    Rodrigo, Guillermo; Carrera, Javier

    2008-01-01

    We propose a new computational tool to produce models of biological systems by assembling models from biological parts. Our software not only takes advantage of modularity, but it also enforces standardisation in part characterisation by considering a model of each part. We have used model parts in SBML to design transcriptional networks. Our software is open source, it works in linux and windows platforms, and it could be used to automatically produce models in a server. Our tool not only facilitates model design, but it will also help to promote the establishment of a registry of model parts. PMID:19003441

  3. Using partial sensor information to orient parts

    SciTech Connect

    Akella, S.; Mason, M.T.

    1999-10-01

    Parts orienting, the process of bringing parts in initially unknown orientations to a goal orientation, is an important aspect of automated assembly. The most common industrial orienting systems are vibratory bowl feeders, which use the shape and mass properties of parts to orient them. Bowl feeders rely on a sequence of mechanical operations and typically do not use sensors. In this paper, the authors describe the use of partial information sensors along with a sequence of pushing operations to eliminate uncertainty in the orientation of parts. The authors characterize the shorter execution lengths of sensor-based plans and show that sensor-based plans are more powerful than sensorless plans in that they can bring a larger class of parts to distinct orientations. The authors characterize the relation among part shape, orientability; and recognizability to identify conditions under which a single plan can orient and recognize multiple part shapes. Although part shape determines the results of the actions and the sensed information, the authors establish that differences in part shape do not always lead to differences in part behavior. The authors show that for any convex polygon, there exists an infinite set of nonsimilar convex polygons that behave identically under linear normal pushes. Furthermore, there exists a infinite set of nonsimilar convex polygons whose behavior cannot be distinguished even with diameter sensing after each push. They authors have implemented several planners and demonstrated generated plans in experiments.

  4. Quality Assurance and Quality Control, Part 2.

    PubMed

    Akers, Michael J

    2015-01-01

    The tragedy surrounding the New England Compounding Center and contaminated steroid syringe preparations clearly points out what can happen if quality-assurance and quality-control procedures are not strictly practiced in the compounding of sterile preparations. This article is part 2 of a two-part article on requirements to comply with United States Pharmacopeia general chapters <797> and <1163> with respect to quality assurance of compounded sterile preparations. Part 1 covered documentation requirements, inspection procedures, compounding accuracy checks, and part of a discussion on bacterial endotoxin testing. Part 2 covers sterility testing, the completion from part 1 on bacterial endotoxin testing, a brief dicussion of United States Pharmacopeia <1163>, and advances in pharmaceutical quality systems.

  5. 45 CFR Appendix A to Part 1110 - Federal Financial Assistance to Which This Part Applies

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 3 2014-10-01 2014-10-01 false Federal Financial Assistance to Which This Part Applies A Appendix A to Part 1110 Public Welfare Regulations Relating to Public Welfare (Continued... Pt. 1110, App. A Appendix A to Part 1110—Federal Financial Assistance to Which This Part Applies...

  6. 33 CFR Appendix A to Part 385 - Illustrations to Part 385

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Illustrations to Part 385 A Appendix A to Part 385 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY.... A Appendix A to Part 385—Illustrations to Part 385 ER12NO03.000 ER12NO03.001...

  7. 49 CFR Appendix A-Ii to Part 541 - Lines With Antitheft Devices Which Are Exempted in-Part From the Parts-Marking Requirements of...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 A Appendix A-II... STANDARD Pt. 541, App. A-II Appendix A-II to Part 541—Lines With Antitheft Devices Which Are Exempted in-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543...

  8. Machining Thin-Walled Cylindrical Parts

    NASA Technical Reports Server (NTRS)

    Cimbak, Joe; Spagnolo, Jim; Kraus, Dan

    1988-01-01

    Cylindrical walls only few thousandths of inch thick machined accurately and without tears or punctures with aid of beryllium copper mandrel. Chilled so it contracts, then inserted in cylinder. As comes to room temperature, mandrel expands and fits snugly inside cylinder. Will not allow part to slide and provides solid backup to prevent deflection when part machined by grinding wheel. When machining finished, cylinder-and-mandrel assembly inserted in dry ice, mandrel contracts and removed from part.

  9. Parts Engineering Experiences, Philosophies and Trends

    NASA Technical Reports Server (NTRS)

    Shaw, Harry; Day, John H. (Technical Monitor)

    2000-01-01

    This document is the presentation viewgraphs of the NASA presentations to NASDA, outlining the philosophy and trends of the experiences with engineering parts. Included in the presentations: are (1) the assurance of COTS boards for Space flight, and (2) Peer Review for Ice, Cloud and land Elevation Satellite (ICESat) GPS flight receivers EEE parts. The emphasis is on the methods for qualification of available parts for space flight.

  10. Basic Principles of Lyophilization, Part 1.

    PubMed

    Akers, Michael J

    2015-01-01

    The achievement of a high-quality lyophilized (freeze-dried) dosage form involves the combination of optimal formulation design and optimal freeze-dry cycle design. This 2-part article describes how this can be done. Part 1 discusses the basic principles and procedures of lyophilization up to a discussion on the different stages of lyophilization. The stages of lyophilization are discussed in part 2.

  11. Culture and Literacy. Part 1: A Historic Overview. Part 2: The Needs of a Pluralistic Society. Part 3: Student Perceptions.

    ERIC Educational Resources Information Center

    Masters, Billie Nave

    This three-part series of articles discusses restructuring U.S. public education to meet the needs of culturally diverse student populations. Part 1 presents a historic overview of the philosophies and attitudes underlying delivery of U.S. public education. The American school system is slow to change and, for the benefit of the industrialized…

  12. NASA Electronic Parts and Packaging Program

    NASA Technical Reports Server (NTRS)

    Kayali, Sammy

    2000-01-01

    NEPP program objectives are to: (1) Access the reliability of newly available electronic parts and packaging technologies for usage on NASA projects through validations, assessments, and characterizations, and the development of test methods/tools; (2)Expedite infusion paths for advanced (emerging) electronic parts and packaging technologies by evaluations of readiness for manufacturability and project usage consideration; (3) Provide NASA projects with technology selection, application, and validation guidelines for electronic parts and packaging hardware and processes; nd (4) Retain and disseminate electronic parts and packaging quality assurance, reliability validations, tools, and availability information to the NASA community.

  13. Metallic parts fabrication using the SIS process

    NASA Astrophysics Data System (ADS)

    Mojdeh, Mehdi

    Since early 1980s, quite a few techniques of Rapid Prototyping (RP), also known as Layered Manufacturing, have been developed. By building three-dimensional parts in a layer-by-layer additive manner, these techniques allow freeform fabrication of parts of complex geometry. Despite recent advances in fabrication of polymer parts, most of the existing rapid prototyping processes are still not capable of fabrication of accurate metallic parts with acceptable mechanical properties. Insufficient dimensional accuracy, limited number of materials, proper mechanical properties, required post machining and lack of repeatability between builds have greatly limited the market penetration of these techniques. This dissertation presents an innovative layered manufacturing technique for fabrication of dense metallic parts called Selective Inhibition Sintering (SIS), developed at the University of Southern California. The SIS-Metal technology adapts RP capabilities and extends them to the field of fabrication of metallic parts for a variety of applications such as tooling and low volume production. Using this process, a metallic part, with varying 3 dimensional geometries, can be automatically constructed from a wide range of materials. SIS-Metal is the only RP process which is suitable for fabrication of dense, complex shaped, accurate objects using a variety of materials. In the SIS-Metal process a metallic part is built layer by layer by deposition for each layer of an inhibitor material which defines the corresponding layer boundary and then filling the voids of the created geometry with metal powder; and compacting the layer formed to reach a high powder density. The resulting green part is then sintered in a furnace to yield the final functional part. In this research different inhibition techniques were explored and a series of single and multi layer parts was fabricated using the most promising inhibition technique, namely, macro-mechanical inhibition. Dimensional

  14. Reliability and quality EEE parts issues

    NASA Technical Reports Server (NTRS)

    Barney, Dan; Feigenbaum, Irwin

    1990-01-01

    NASA policy and procedures are established which govern the selection, testing, and application of electrical, electronic, and electromechanical (EEE) parts. Recent advances in the state-of-the-art of electronic parts and associated technologies can significantly impact the electronic designs and reliability of NASA space transportation avionics. Significant issues that result from these advances are examined, including: recent advances in microelectronics technology (as applied to or considered for use in NASA projects); electron packaging technology advances (concurrent with, and as a result of, the development of the advanced microelectronic devices); availability of parts used in space avionics; and standardization and integration of parts activities between projects, centers, and contractors.

  15. Opportunistic replacement of fusion power system parts

    SciTech Connect

    Day, J.A.; George, L.L.

    1981-10-26

    This paper describes a maintenance problem in a fusion power plant. The problem is to specify which life limited parts should be replaced when there is an opportunity. The objective is to minimize the cost rate of replacement parts and of maintenance actions while satisfying a power plant availability constraint. The maintenance policy is to look ahead and replace all parts that will reach their life limits within a time called a screen. Longer screens yield greater system availabilities because more parts are replaced prior to their life limits.

  16. Method of forming and assembly of metal parts and ceramic parts

    DOEpatents

    Ripley, Edward B.

    2011-11-22

    A method of forming and assembling at least two parts together that may be metal, ceramic, or a combination of metal and ceramic parts. Such parts may have different CTE. Individual parts that are formed and sintered from particles leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

  17. Metrology of Large Parts. Chapter 5

    NASA Technical Reports Server (NTRS)

    Stahl, H. Philip

    2012-01-01

    As discussed in the first chapter of this book, there are many different methods to measure a part using optical technology. Chapter 2 discussed the use of machine vision to measure macroscopic features such as length and position, which was extended to the use of interferometry as a linear measurement tool in chapter 3, and laser or other trackers to find the relation of key points on large parts in chapter 4. This chapter looks at measuring large parts to optical tolerances in the sub-micron range using interferometry, ranging, and optical tools discussed in the previous chapters. The purpose of this chapter is not to discuss specific metrology tools (such as interferometers or gauges), but to describe a systems engineering approach to testing large parts. Issues such as material warpage and temperature drifts that may be insignificant when measuring a part to micron levels under a microscope, as will be discussed in later chapters, can prove to be very important when making the same measurement over a larger part. In this chapter, we will define a set of guiding principles for successfully overcoming these challenges and illustrate the application of these principles with real world examples. While these examples are drawn from specific large optical testing applications, they inform the problems associated with testing any large part to optical tolerances. Manufacturing today relies on micrometer level part performance. Fields such as energy and transportation are demanding higher tolerances to provide increased efficiencies and fuel savings. By looking at how the optics industry approaches sub-micrometer metrology, one can gain a better understanding of the metrology challenges for any larger part specified to micrometer tolerances. Testing large parts, whether optical components or precision structures, to optical tolerances is just like testing small parts, only harder. Identical with what one does for small parts, a metrologist tests large parts and optics

  18. Search Engines for Tomorrow's Scholars, Part Two

    ERIC Educational Resources Information Center

    Fagan, Jody Condit

    2012-01-01

    This two-part article considers how well some of today's search tools support scholars' work. The first part of the article reviewed Google Scholar and Microsoft Academic Search using a modified version of Carole L. Palmer, Lauren C. Teffeau, and Carrier M. Pirmann's framework (2009). Microsoft Academic Search is a strong contender when…

  19. 40 CFR Appendix - Tables to Part 132

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Tables to Part 132 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY GUIDANCE FOR THE GREAT LAKES SYSTEM Application of part 132 requirements in Great Lakes States and Tribes. Pt. 132,...

  20. Part Timers and University Faculty Development.

    ERIC Educational Resources Information Center

    Dick, Robert C.

    The increasing number of part-time faculty, especially in university speech communication departments, appears to provide vital continuity in professional development. There are three kinds of part-time faculty: those with new doctoral degrees who want to teach full time but who cannot find appointments, those who are still active or semiactive…

  1. [Basic lung ultrasound. Part 2. Parenchymal diseases].

    PubMed

    de la Quintana Gordon, F B; Nacarino Alcorta, B; Fajardo Pérez, M

    2015-01-01

    In this second part, an analysis is made of the pathology of lung parenchyma. This text is structured into different sections, including the study of atelectasias, pneumonia and abscess, interstitial/alveolar or Blines patterns, and finally an analysis is made of pulmonary embolism. With this second part, the basic knowledge to develop lung ultrasound in the anesthesia department has been presented.

  2. International Perspectives in Leadership Development: Part I.

    PubMed

    Bleich, Michael R

    2015-08-01

    In this first part of a two-part series, leadership development perspectives are shared from interviews and experiences gained while visiting Taiwan and China. Each country has a distinctive culture and needs, yet both are rapidly rising to strengthen the leadership capacity of nurses and are increasingly a source of advances in global leadership and organizational science.

  3. Part-Time Learners Need Support Too

    ERIC Educational Resources Information Center

    Fazackerley, Anna

    2009-01-01

    In England, part-time students have to pay their fees up-front, they can't take out a government-supported loan, and their chances of securing any financial support are depressingly slim. While all full-time students are entitled to some state support, Parliamentary questions have revealed that nine out of 10 part-time students receive nothing at…

  4. Preliminary Report on Part-Time Faculty.

    ERIC Educational Resources Information Center

    California Community Colleges, Sacramento.

    This report summarizes survey data on part-time faculty utilization in California community colleges. Data was received from 67 of the 69 community college districts. The primary purpose of the survey was to obtain information that would be useful to community college boards and administrators in dealing with part-time faculty legislation. Tables…

  5. Teaching Science to ELLs, Part I

    ERIC Educational Resources Information Center

    Bautista, Nazan; Castaneda, Martha

    2011-01-01

    Since 1995, the population of English language learners (ELLs) in the United States has increased by an astonishing 57% (Maxwell 2009). Though ELLs come from many different backgrounds, they share the common challenge of learning English while responding to academic content demands. Part I of this two-part article provides key strategies every…

  6. FOUNDATIONS OF THAI. BOOK I, PART 1.

    ERIC Educational Resources Information Center

    ANTHONY, EDWARD M.; AND OTHERS

    THIS BEGINNING TEXT PRESENTS THE ESSENTIALS OF THAI PRONUNCIATION AND GRAMMAR IN A FORMAT GEARED TO REGULAR COLLEGE LANGUAGE COURSE SCHEDULING. THE COURSE CONSISTS OF TWO VOLUMES, BOOK I, PART 1 (LESSONS 1-14) AND BOOK I, PART 2 (LESSONS 15-25), PROVIDING MATERIAL FOR TWO UNIVERSITY SEMESTERS OF CLASSROOM AND LABORATORY WORK. BASED ON A…

  7. A Theory of Intellectual Development: Part 1.

    ERIC Educational Resources Information Center

    Confrey, Jere

    1994-01-01

    Part 1 of a three-part article analyzing radical constructivism (as one interpretation of Piaget) and the socio-cultural perspective (as one interpretation of Vygotsky), including major principles, primary contributions to mathematics education, and potential limitations. Introduces an integration of the two theories through a feminist…

  8. [Basic lung ultrasound. Part 2. Parenchymal diseases].

    PubMed

    de la Quintana Gordon, F B; Nacarino Alcorta, B; Fajardo Pérez, M

    2015-01-01

    In this second part, an analysis is made of the pathology of lung parenchyma. This text is structured into different sections, including the study of atelectasias, pneumonia and abscess, interstitial/alveolar or Blines patterns, and finally an analysis is made of pulmonary embolism. With this second part, the basic knowledge to develop lung ultrasound in the anesthesia department has been presented. PMID:25708093

  9. Fixture for mounting small parts for processing

    DOEpatents

    Foreman, Larry R.; Gomez, Veronica M.; Thomas, Michael H.

    1990-01-01

    A fixture for mounting small parts, such as fusion target spheres or microelectronic components. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing.

  10. Urban versus Rural: Part-Time Enrollment

    ERIC Educational Resources Information Center

    Copeland, Michael; Tietjen-Smith, Tara; Waller, Lee Rusty; Waller, Sharon Kay

    2008-01-01

    The researchers examined part-time enrollment within public two-year, degree-granting community colleges by the degree of urbanization classifications of city, suburban, town, and rural for fall 2003 and 2005. Findings indicate no statistical differences in part-time enrollment between city and suburban institutions. No statistical differences…

  11. 30 CFR 57.19122 - Replacement parts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Personnel Hoisting Inspection and Maintenance § 57.19122 Replacement parts. Parts used to repair hoists shall have...

  12. 30 CFR 56.19122 - Replacement parts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Personnel Hoisting Inspection and Maintenance § 56.19122 Replacement parts. Parts used to repair hoists shall have...

  13. 49 CFR Appendix - Figures to Part 38

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 1 2013-10-01 2013-10-01 false Figures to Part 38 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Other Vehicles and Systems Trams, and similar vehicles, and systems Pt. 38, Figures Figures to Part 38 ER28SE98.000...

  14. 49 CFR Appendix - Figures to Part 38

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 1 2012-10-01 2012-10-01 false Figures to Part 38 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Other Vehicles and Systems Trams, and similar vehicles, and systems Pt. 38, Figures Figures to Part 38 ER28SE98.000...

  15. Basic Principles of Lyophilization, Part 2.

    PubMed

    Akers, Michael J

    2016-01-01

    The achievement of a high-quality lyophilized (freeze-dried) dosage form involves the combination of optimal formulation design and optimal freeze-dry cycle design. Part 1 of this 2-part article discussed the basic principles and procedures of lyophilization up to a discussion on the different stages of lyophilization. The stages of lyophilization are discussed within this article.

  16. Part Time Study in Higher Education.

    ERIC Educational Resources Information Center

    Neville, Colin

    This document, which is intended for adults considering enrolling in part-time study in higher education, examines the objectives and experiences of adults who have pursued part-time study in higher education in the United Kingdom. The following reasons why adults return to higher education are discussed: personal development; self-fulfillment;…

  17. 47 CFR Parts 401-499 - [RESERVED

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 5 2014-10-01 2014-10-01 false 401 PARTS 401-499 Telecommunication NATIONAL TELECOMMUNICATIONS AND INFORMATION ADMINISTRATION, DEPARTMENT OF COMMERCE, AND NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION E-911 GRANT PROGRAM Closeout. PARTS 401-499...

  18. Actel Parts Usage in GSFC Projects

    NASA Technical Reports Server (NTRS)

    Sahu, Kusum

    2006-01-01

    The purpose of this paper is to provide an overview of the Actel field programmable gate array (FPGA) issues and investigations to date, provide information to GSFC parts engineers on the risks associated with the use of these parts in flight, provide procurement options for their respective projects, and provide general guidance for use of these devices if no other acceptable options exist.

  19. Body Parts and Early-Learned Verbs

    ERIC Educational Resources Information Center

    Maouene, Josita; Hidaka, Shohei; Smith, Linda B.

    2008-01-01

    This article reports the structure of associations among 101 common verbs and body parts. The verbs are those typically learned by children learning English prior to 3 years of age. In a free association task, 50 adults were asked to provide the single body part that came to mind when they thought of each verb. Analyses reveal highly systematic…

  20. Part and Bipartial Canonical Correlation Analysis.

    ERIC Educational Resources Information Center

    Timm, Neil H.; Carlson, James E.

    Part and bi-partial canonical correlations were developed by extending the definitions of part and bi-partial correlation to sets of variates. These coefficients may be used to help researchers explore relationships which exist among several sets of normally distributed variates. (Author)

  1. 49 CFR Appendix - Figures to Part 38

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 1 2011-10-01 2011-10-01 false Figures to Part 38 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Other Vehicles and Systems Trams, and similar vehicles, and systems Pt. 38, Figures Figures to Part 38 ER28SE98.000...

  2. 49 CFR Appendix - Figures to Part 38

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Figures to Part 38 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Other Vehicles and Systems Trams, and similar vehicles, and systems Pt. 38, Figures Figures to Part 38 ER28SE98.000...

  3. 30 CFR 56.19122 - Replacement parts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Personnel Hoisting Inspection and Maintenance § 56.19122 Replacement parts. Parts used to repair hoists shall have...

  4. 30 CFR 56.19122 - Replacement parts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Personnel Hoisting Inspection and Maintenance § 56.19122 Replacement parts. Parts used to repair hoists shall have...

  5. 30 CFR 57.19122 - Replacement parts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Personnel Hoisting Inspection and Maintenance § 57.19122 Replacement parts. Parts used to repair hoists shall have...

  6. 30 CFR 57.19122 - Replacement parts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Personnel Hoisting Inspection and Maintenance § 57.19122 Replacement parts. Parts used to repair hoists shall have...

  7. 47 CFR Alphabetical Index - Part 78

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false Part 78 Index Alphabetical Index... Emissions; emission limitations 78.103 Equal employment opportunities 78.75 Equipment changes 78.109... 78.69 Remote control operation 78.51 Rules in other Parts 78.3 Rules, Possession of 78.67 S...

  8. Project Management; Part 1--The Soft Skills.

    ERIC Educational Resources Information Center

    Bailey, Harold J.; Ergott, Kathleen A.

    1998-01-01

    Presents the first of a three-part series of articles on the life of a project manager. Discussion in Part 1 deals with the people and related skills involved in the project, including: interrelationships between the client, project manager, and executive management; oral, written, and body-language communication forms; and planning and…

  9. 47 CFR Alphabetical Index - Part 76

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 4 2013-10-01 2013-10-01 false Part 76 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND..., Index Alphabetical Index—Part 76 A A and B grade contours 76.5 Access, Channel enforcement 76.10...

  10. 47 CFR Alphabetical Index - Part 78

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 4 2013-10-01 2013-10-01 false Part 78 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES CABLE TELEVISION RELAY SERVICE Technical Regulations Modulation limits. Pt. 78, Index Alphabetical Index—Part 78 A...

  11. 47 CFR Alphabetical Index - Part 76

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 4 2014-10-01 2014-10-01 false Part 76 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND..., Index Alphabetical Index—Part 76 A A and B grade contours 76.5 Access, Channel enforcement 76.10...

  12. 47 CFR Alphabetical Index - Part 78

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Part 78 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES CABLE TELEVISION RELAY SERVICE Technical Regulations Modulation limits. Pt. 78, Index Alphabetical Index—Part 78 A...

  13. 47 CFR Alphabetical Index - Part 78

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 4 2014-10-01 2014-10-01 false Part 78 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES CABLE TELEVISION RELAY SERVICE Technical Regulations Modulation limits. Pt. 78, Index Alphabetical Index—Part 78 A...

  14. Holistic processing from learned attention to parts.

    PubMed

    Chua, Kao-Wei; Richler, Jennifer J; Gauthier, Isabel

    2015-08-01

    Attention helps us focus on what is most relevant to our goals, and prior work has shown that aspects of attention can be learned. Learned inattention to parts can abolish holistic processing of faces, but it is unknown whether learned attention to parts is sufficient to cause a change from part-based to holistic processing with objects. We trained subjects to individuate nonface objects (Greebles) from 2 categories: Ploks and Glips. Diagnostic information was in complementary halves for the 2 categories. Holistic processing was then tested with Plok-Glip composites that combined the kind of part that was diagnostic or nondiagnostic during training. Exposure to Greeble parts resulted in general failures of selective attention for nondiagnostic composites, but face-like holistic processing was only observed for diagnostic composites. These results demonstrated a novel link between learned attentional control and the acquisition of holistic processing.

  15. 48 CFR 37.000 - Scope of part.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...). Additional guidance for research and development services is in part 35; architect-engineering services is in part 36; information technology is in part 39; and transportation services is in part 47. Parts 35,...

  16. The Goddard Space Flight Center preferred parts list, revision A

    NASA Technical Reports Server (NTRS)

    Tyson, N. E. (Editor)

    1982-01-01

    A listing is presented of preferred electronic parts, part upgrading procedures, part derating guidelines, and part screening procedures to be used in the selection, procurement, and application of parts for Goddard Space Flight Center space systems and ground support equipment.

  17. Tropical forests: a call for action. Part 1: the plan. Part 2: case studies. Part 3: country investment profiles

    SciTech Connect

    Not Available

    1985-10-01

    The World Resources Institute (WRI), in cooperation with multi- and bi-lateral organizations, has launched a major initiative to conserve forests in the humid and semiarid/arid areas of developing countries. The 3-part WRI report is a call to political action on this subject. Part 1 describes the high costs exacted by deforestation, but asserts that the process can be arrested and reversed by a partnership of governments, local participants, and development-assistance agencies. Proposals are presented for a 5-year action plan in farm, community, and arid-zone forestry. Parts 2 and 3 include case studies of the successful projects listed in Part 1 and 5-year investment profiles of 56 developing countries affected by deforestation.

  18. 12 CFR Appendix B to Part 31 - Comparison of Selected Provisions of Part 31 and Part 32 (as of October 1, 1996)

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... lending provisions contained in Regulation O (Reg. O) (12 CFR part 215), the chart in this appendix refers... and Part 32 (as of October 1, 1996) B Appendix B to Part 31 Banks and Banking COMPTROLLER OF THE.... 31, App. B Appendix B to Part 31—Comparison of Selected Provisions of Part 31 and Part 32 (as...

  19. 49 CFR Appendix A-Ii to Part 541 - Lines With Antitheft Devices Which Are Exempted in-Part From the Parts-Marking Requirements of...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 A Appendix A-II...-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 Manufacturers... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE THEFT...

  20. 49 CFR Appendix A-Ii to Part 541 - Lines With Antitheft Devices Which Are Exempted In-Part From the Parts-Marking Requirements of...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 A Appendix A-II...-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 Manufacturers... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE THEFT...

  1. 49 CFR Appendix A-Ii to Part 541 - Lines With Antitheft Devices Which Are Exempted In-Part From the Parts-Marking Requirements of...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 A Appendix A-II...-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 Manufacturers... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE THEFT...

  2. Conflict in the workplace: part 2.

    PubMed

    Northam, Sally

    2009-07-01

    Last month, in Part 1 of this two-part article, I explored factors that contribute to workplace conflict among nurses (such as sex, age, power, and culture), as well as individual responses to conflict. I also discussed my observation that nurses apply their skills in therapeutic communication to solving workplace conflict, and that they therefore tend to focus on emotions rather than on solutions. In Part 2, I present strategies nurses can use to resolve conflict and build more effective-and harmonious-workplace relationships.

  3. Conflict in the workplace: part 2.

    PubMed

    Northam, Sally

    2009-07-01

    Last month, in Part 1 of this two-part article, I explored factors that contribute to workplace conflict among nurses (such as sex, age, power, and culture), as well as individual responses to conflict. I also discussed my observation that nurses apply their skills in therapeutic communication to solving workplace conflict, and that they therefore tend to focus on emotions rather than on solutions. In Part 2, I present strategies nurses can use to resolve conflict and build more effective-and harmonious-workplace relationships. PMID:19546648

  4. Phenomenology of electromagnetic coupling. Part II

    SciTech Connect

    King, R.J.; Ludwigsen, A.P.; Kunz, K.S.

    1985-08-01

    This report is the second of a planned series which summarize efforts at Lawrence Livermore National Laboratory relating to phenomenology studies of back door coupling from several MHz to 10's of GHz. These studies are pertinent to high altitude EMP (HEMP), enhanced HEMP and microwave coupling. Part I dealt with coupling through apertures into large free-standing cavities having, at most, one interior cable. An overview of the effort is given, and a summary of the effects observed in Part I. The main effort since Part I has been devoted to Facilities Development, development of an interior coupling decomposition model and coupling experiments. Projected future effort is discussed.

  5. 37 CFR 41.11 - Ex Parte communications in inter partes proceedings.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE PRACTICE BEFORE THE PATENT TRIAL AND APPEAL BOARD General... inter partes reexamination (subpart C of this part) or about a contested case (subparts D and E of...

  6. 16 CFR Figure 3 to Part 1508 - Figure 3 to Part 1508

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Figure 3 to Part 1508 3 Figure 3 to Part 1508 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS FIREWORKS DEVICES Multiple-tube fireworks devices. Pt. 1508, Fig. 3 Figure 3 to Part 1508...

  7. 49 CFR Appendix A to Part 21 - Activities to Which This Part Applies

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 1 2013-10-01 2013-10-01 false Activities to Which This Part Applies A Appendix A... 1964 Pt. 21, App. A Appendix A to Part 21—Activities to Which This Part Applies 1. Use of grants made.... 141(a)). 6. Use of Coast Guard personnel for duty in connection with maritime instruction and...

  8. 45 CFR Appendix A to Part 1203 - Federal Financial Assistance to Which This Part Applies

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 4 2013-10-01 2013-10-01 false Federal Financial Assistance to Which This Part Applies A Appendix A to Part 1203 Public Welfare Regulations Relating to Public Welfare (Continued... OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Pt. 1203, App. A Appendix A to Part...

  9. 36 CFR Appendix A to Part 14 - Appendix A to Part 14

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 1 2012-07-01 2012-07-01 false Appendix A to Part 14 A Appendix A to Part 14 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR RIGHTS-OF-WAY Pt. 14, App. A Appendix A to Part 14 Where necessary, these forms should be modified so...

  10. 45 CFR Appendix A to Part 611 - Appendix A to Part 611

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 3 2014-10-01 2014-10-01 false Appendix A to Part 611 A Appendix A to Part 611 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION... CIVIL RIGHTS ACT OF 1964 Pt. 611, App. A Appendix A to Part 611 Statutory Provisions under which...

  11. 49 CFR Appendix A to Part 5 - Appendix A to Part 5

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 1 2013-10-01 2013-10-01 false Appendix A to Part 5 A Appendix A to Part 5 Transportation Office of the Secretary of Transportation RULEMAKING PROCEDURES Pt. 5, App. A Appendix A to Part 5 Pursuant to § 5.1(b), the following officials of the Office of the Secretary of Transportation...

  12. 14 CFR Appendix B to Part 25 - Appendix B to Part 25

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Appendix B to Part 25 B Appendix B to Part 25 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Pt. 25, App. B Appendix B to Part 25 EC28SE91.055...

  13. 24 CFR Appendix B to 24 Cfr Part 3400 - Appendix B to 24 CFR Part 3400

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Appendix B to 24 CFR Part 3400 B Appendix B to 24 CFR Part 3400 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT SAFE MORTGAGE LICENSING ACT Pt. 3400, App. B Appendix B to 24 CFR Part...

  14. 24 CFR Appendix D to 24 Cfr Part 3400 - Appendix D to 24 CFR Part 3400

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Appendix D to 24 CFR Part 3400 D Appendix D to 24 CFR Part 3400 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT SAFE MORTGAGE LICENSING ACT Pt. 3400, App. D Appendix D to 24 CFR Part...

  15. The Use and Abuse of Part-Time Faculty: The Part-Timers' Point of View.

    ERIC Educational Resources Information Center

    Wilson, Wendy L.

    Problems faced by part-time faculty members are identified, and suggestions to avoid mistreatment of these teachers are offered. Disadvantages of part-time teaching include the lack of equitable pay and benefits. Since most institutions have a standard pay rate for part-timers, it is suggested that teaching excellence be recognized by creating…

  16. 12 CFR Appendix Ms-1 to Part 1024 - Appendix MS-1 to Part 1024

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 8 2014-01-01 2014-01-01 false Appendix MS-1 to Part 1024 MS Appendix MS-1 to Part 1024 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION REAL ESTATE SETTLEMENT PROCEDURES ACT (REGULATION X) Pt. 1024, App. MS-1 Appendix MS-1 to Part 1024 SERVICING DISCLOSURE...

  17. 24 CFR Appendix C to 24 Cfr Part 3400 - Appendix C to 24 CFR Part 3400

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Appendix C to 24 CFR Part 3400 C Appendix C to 24 CFR Part 3400 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT SAFE MORTGAGE LICENSING ACT Pt. 3400, App. C Appendix C to 24 CFR Part...

  18. 14 CFR Appendix C to Part 151 - Appendix C to Part 151

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Appendix C to Part 151 C Appendix C to Part...) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. C Appendix C to Part 151 There is set forth below an... Items 1. Maintenance-type work, including: (a) Seal coats. (b) Crack filling. (c) Resealing joints....

  19. 49 CFR 236.505 - Proper operative relation between parts along roadway and parts on locomotive.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... roadway and parts on locomotive. 236.505 Section 236.505 Transportation Other Regulations Relating to... SYSTEMS, DEVICES, AND APPLIANCES Automatic Train Stop, Train Control and Cab Signal Systems Standards § 236.505 Proper operative relation between parts along roadway and parts on locomotive....

  20. 14 CFR Appendix G to Part 151 - Appendix G to Part 151

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Appendix G to Part 151 G Appendix G to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. G Appendix G to Part 151 There is set forth below...

  1. Part-Time Politics: The Micropolitical World of Part-Time Teaching

    ERIC Educational Resources Information Center

    Young, Beth; Brooks, Mary

    2004-01-01

    During a multi-district study on part-time teaching employment, part-time teachers, school administrators, and teachers' association officials spoke about a range of micropolitical activities related to part-time teaching arrangements as a component of flexible workforces and as an element of flexible workplaces. The study was conducted in one…

  2. 14 CFR Appendix E to Part 151 - Appendix E to Part 151

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Appendix E to Part 151 E Appendix E to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. E Appendix E to Part 151 There is set forth below...

  3. Ontario Universities Benefits Survey, 1991-92. Part I: Benefits Excluding Pensions [and] Part II: Pensions.

    ERIC Educational Resources Information Center

    Council of Senior Administrative Officers--Universities of Ontario, Toronto.

    This report, which combined Part I and Part II of a benefit study, presents data from a survey of Ontario universities concerning fringe benefits offered in 1991-92. Part I is made up of a series of tables displaying the information on particular benefits institution-by-institution. The first five tables cover general aspects of benefits,…

  4. 14 CFR Appendix F to Part 151 - Appendix F to Part 151

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Appendix F to Part 151 F Appendix F to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. F Appendix F to Part 151 There is set forth below...

  5. 14 CFR Appendix F to Part 151 - Appendix F to Part 151

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Appendix F to Part 151 F Appendix F to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. F Appendix F to Part 151 There is set forth below...

  6. 24 CFR Appendix D to 24 Cfr Part 3400 - Appendix D to 24 CFR Part 3400

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Appendix D to 24 CFR Part 3400 D Appendix D to 24 CFR Part 3400 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT SAFE MORTGAGE LICENSING ACT Pt. 3400, App. D Appendix D to 24 CFR Part...

  7. 16 CFR Figure 3 to Part 1509 - Figure 3 to Part 1509

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Figure 3 to Part 1509 3 Figure 3 to Part 1509 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR NON-FULL-SIZE BABY CRIBS Pt. 1509, Fig. 3 Figure 3 to Part 1509 EC03OC91.066...

  8. 16 CFR Figure 1 to Part 1509 - Figure 1 to Part 1509

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Figure 1 to Part 1509 1 Figure 1 to Part 1509 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR NON-FULL-SIZE BABY CRIBS Pt. 1509, Fig. 1 Figure 1 to Part 1509 EC03OC91.064...

  9. 16 CFR Figure 1 to Part 1509 - Figure 1 to Part 1509

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Figure 1 to Part 1509 1 Figure 1 to Part 1509 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR NON-FULL-SIZE BABY CRIBS Pt. 1509, Fig. 1 Figure 1 to Part 1509 EC03OC91.064...

  10. 16 CFR Figure 3 to Part 1508 - Figure 3 to Part 1508

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Figure 3 to Part 1508 3 Figure 3 to Part 1508 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR FULL-SIZE BABY CRIBS Pt. 1508, Fig. 3 Figure 3 to Part 1508 EC03OC91.063...

  11. 16 CFR Figure 3 to Part 1508 - Figure 3 to Part 1508

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Figure 3 to Part 1508 3 Figure 3 to Part 1508 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR FULL-SIZE BABY CRIBS Pt. 1508, Fig. 3 Figure 3 to Part 1508 EC03OC91.063...

  12. 16 CFR Figure 3 to Part 1509 - Figure 3 to Part 1509

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Figure 3 to Part 1509 3 Figure 3 to Part 1509 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR NON-FULL-SIZE BABY CRIBS Pt. 1509, Fig. 3 Figure 3 to Part 1509 EC03OC91.066...

  13. 24 CFR Appendix A to 24 Cfr Part 3400 - Appendix A to 24 CFR Part 3400

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Appendix A to 24 CFR Part 3400 A Appendix A to 24 CFR Part 3400 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT SAFE MORTGAGE LICENSING ACT Pt. 3400, App. A Appendix A to 24 CFR Part...

  14. 24 CFR Appendix A to 24 Cfr Part 3400 - Appendix A to 24 CFR Part 3400

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Appendix A to 24 CFR Part 3400 A Appendix A to 24 CFR Part 3400 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT SAFE MORTGAGE LICENSING ACT Pt. 3400, App. A Appendix A to 24 CFR Part...

  15. 16 CFR Figure 3 to Part 1508 - Figure 3 to Part 1508

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Figure 3 to Part 1508 3 Figure 3 to Part 1508 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS FIREWORKS DEVICES Multiple-tube fireworks devices. Pt. 1508, Fig. 3 Figure 3 to Part 1508...

  16. 16 CFR Figure 3 to Part 1508 - Figure 3 to Part 1508

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Figure 3 to Part 1508 3 Figure 3 to Part 1508 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS FIREWORKS DEVICES Multiple-tube fireworks devices. Pt. 1508, Fig. 3 Figure 3 to Part 1508...

  17. 14 CFR Appendix F to Part 151 - Appendix F to Part 151

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Appendix F to Part 151 F Appendix F to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Pt. 151, App. F Appendix F to Part 151 There is set forth below...

  18. Managing EEE part standardisation and procurement

    NASA Astrophysics Data System (ADS)

    Serieys, C.; Bensoussan, A.; Petitmangin, A.; Rigaud, M.; Barbaresco, P.; Lyan, C.

    2002-12-01

    This paper presents the development activities in space components selection and procurement dealing with a new data base tool implemented at Alcatel Space using TransForm softwaa re configurator developed by Techform S.A. Based on TransForm, Access Ingenierie has devv eloped a software product named OLG@DOS which facilitate the part nomenclatures analyses for new equipment design and manufacturing in term of ACCESS data base implementation. Hi-Rel EEE part type technical, production and quality information are collected and compiled usingproduction data base issued from production tools implemented for equipment definition, description and production based on Manufacturing Resource Planning (MRP II Control Open) and Parametric Design Manager (PDM Work Manager). The analysis of any new equipment nomenclature may be conducted through this means for standardisation purpose, cost containment program and management procurement activities as well as preparation of Component reviews as Part Approval Document and Declared Part List validation.

  19. Biochemical Engineering. Part II: Process Design

    ERIC Educational Resources Information Center

    Atkinson, B.

    1972-01-01

    Describes types of industrial techniques involving biochemical products, specifying the advantages and disadvantages of batch and continuous processes, and contrasting biochemical and chemical engineering. See SE 506 318 for Part I. (AL)

  20. Fire prevention on airplanes. Part II

    NASA Technical Reports Server (NTRS)

    Sabatier, J

    1929-01-01

    This part of the report presents a detailed examination of spark prevention, fire extinguishers, and fuel tank location and design. A continued program of investigations and research is also proposed.

  1. Dynamic Breaking Tests of Airplane Parts

    NASA Technical Reports Server (NTRS)

    Hertel, Heinrich

    1933-01-01

    The static stresses of airplane parts, the magnitude of which can be determined with the aid of static load assumptions, are mostly superposed by dynamic stresses, the magnitude of which has been but little explored. The object of the present investigation is to show how the strength of airplane parts can best be tested with respect to dynamic stresses with and without superposed static loading, and to what extent the dynamic strength of the parts depends on their structural design. Experimental apparatus and evaluation methods were developed and tried for the execution of vibration-strength tests with entire structural parts both with and without superposed static loading. Altogether ten metal spars and spar pieces and two wooden spars were subjected to vibration breaking tests.

  2. Seaplanes floats and hulls. Part I

    NASA Technical Reports Server (NTRS)

    Herrmann, H

    1927-01-01

    This part of the report presents characteristics and graphic representations of water resistance. The laws of similarity are discussed as well as the theory of model tests. The test procedures and model tests of other countries are also discussed.

  3. Behaviourally Defined Objectives: A Critique. Part Two.

    ERIC Educational Resources Information Center

    Wesson, A. J.

    1983-01-01

    This is the concluding part of an article published in the August 1983 edition. A number of arguments are developed to demonstrate the inadequacy of behaviorally defined objectives as a basis for curriculum planning. (SSH)

  4. Curing of Furfuryl Alcohol-Impregnated Parts

    NASA Technical Reports Server (NTRS)

    Lawton, J. W.; Brayden, T. H.

    1983-01-01

    Delamination problem in reinforced carbon/carbon parts impregnated with oxalic acid-catalyzed furfuryl alcohol overcome by instituting two additional quality-control tests on alcohol and by changing curing conditions.

  5. Plant Parts: Common Scents and Good Taste.

    ERIC Educational Resources Information Center

    Swinehart, Rebecca, Ed.

    1995-01-01

    This activity involves elementary students in an investigation of the usefulness of plant parts as a food source. An introduction discusses the dependence of animal life on plants. Materials needed and step-by-step procedure are provided. (LZ)

  6. Estimating Lives Of Space Shuttle Parts

    NASA Technical Reports Server (NTRS)

    Watkins, Tommie, Jr.; Annis, Chuck G.

    1994-01-01

    SSPOC (Space Shuttle Probabilistic Optimization Code) computer program, implements probabilistic mathematical model, accepts defined distributions of parameters controlling life of Space Shuttle main engine. Used to perform tradeoff studies to optimize between service life and acceptable level of risk, with greater accuracy. Also includes probability of removal and failure of parts, along with number of surviving parts for each interval of inspections. Written in FORTRAN 77, and user interface written in PASCAL(R).

  7. Electric injury, Part II: Specific injuries.

    PubMed

    Fish, R M

    2000-01-01

    Electric injury can cause disruption of cardiac rhythm and breathing, burns, fractures, dislocations, rhabdomyolysis, eye and ear injury, oral and gastrointestinal injury, vascular damage, disseminated intravascular coagulation, peripheral and spinal cord injury, and Reflex Sympathetic Dystrophy. Secondary trauma from falls, fires, flying debris, and inhalation injury can complicate the clinical picture. Diagnostic and treatment considerations for electric injuries are described in this article, which is the second part of a three-part series on electric injuries.

  8. Electric injury, Part II: Specific injuries.

    PubMed

    Fish, R M

    2000-01-01

    Electric injury can cause disruption of cardiac rhythm and breathing, burns, fractures, dislocations, rhabdomyolysis, eye and ear injury, oral and gastrointestinal injury, vascular damage, disseminated intravascular coagulation, peripheral and spinal cord injury, and Reflex Sympathetic Dystrophy. Secondary trauma from falls, fires, flying debris, and inhalation injury can complicate the clinical picture. Diagnostic and treatment considerations for electric injuries are described in this article, which is the second part of a three-part series on electric injuries. PMID:10645833

  9. Fixture for mounting small parts for processing

    DOEpatents

    Foreman, L.R.; Gomez, V.M.; Thomas, M.H.

    1990-05-29

    A fixture for mounting small parts, such as fusion target spheres or microelectronic components is disclosed. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing. 5 figs.

  10. Rapid Prototyping Of Layered Composite Parts

    NASA Technical Reports Server (NTRS)

    Wolff, Edwin D.

    1992-01-01

    Numerically controlled cutting accelerates fabrication of layers. Proposed method derived from stereoscopic lithography. CATIA or CAEDS computer program used to generate three-dimensional mathematical model of prototype part. In model, geometry of part specified in layers, as in stereoscopic lithography. Model data for each layer fed to computer-numerically-controlled ultrasonic cutting machine. Sheet of prepreg (uncured composite material) of specified layer thickness placed in machine and cut, under control of model data, to specified shape of layer.

  11. International Perspectives in Leadership Development: Part II.

    PubMed

    Bleich, Michael R

    2015-09-01

    In the second part of this two-part series, leadership development perspectives are shared from the opening of the Penn Wharton China Center in Beijing. The symposium brought national leaders from Chinese academic settings and professional organizations together with thought leaders from the United States to discuss nursing leadership across the care continuum. Highlights of demographic shifts, clinical demands, and policy decisions are presented, with an eye toward future trends in professional development.

  12. [Personal contextual factors (short version), part II].

    PubMed

    Viol, M; Grotkamp, S; Seger, W

    2007-01-01

    In this journal a group of medical experts recently compiled a proposal for a systemic classification of personal contextual factors into domains, categories and items with respect to the ethical guidelines of the ICF (part I). In a second step the main issues have been transferred into the preliminary draft for a short version which is presented in this paper to give support for practical daily use in health insurance matters (part II). PMID:17347930

  13. Alternative Test Methods for Electronic Parts

    NASA Technical Reports Server (NTRS)

    Plante, Jeannette

    2004-01-01

    It is common practice within NASA to test electronic parts at the manufacturing lot level to demonstrate, statistically, that parts from the lot tested will not fail in service using generic application conditions. The test methods and the generic application conditions used have been developed over the years through cooperation between NASA, DoD, and industry in order to establish a common set of standard practices. These common practices, found in MIL-STD-883, MIL-STD-750, military part specifications, EEE-INST-002, and other guidelines are preferred because they are considered to be effective and repeatable and their results are usually straightforward to interpret. These practices can sometimes be unavailable to some NASA projects due to special application conditions that must be addressed, such as schedule constraints, cost constraints, logistical constraints, or advances in the technology that make the historical standards an inappropriate choice for establishing part performance and reliability. Alternate methods have begun to emerge and to be used by NASA programs to test parts individually or as part of a system, especially when standard lot tests cannot be applied. Four alternate screening methods will be discussed in this paper: Highly accelerated life test (HALT), forward voltage drop tests for evaluating wire-bond integrity, burn-in options during or after highly accelerated stress test (HAST), and board-level qualification.

  14. 47 CFR 24.2 - Other applicable rule parts.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) Part 17. This part contains requirements for the construction, marking and lighting of antenna towers... structure registration applications. (g) Part 20 of this chapter governs commercial mobile radio...

  15. Magnetic self-assembly of small parts

    NASA Astrophysics Data System (ADS)

    Shetye, Sheetal B.

    Modern society's propensity for miniaturized end-user products is compelling electronic manufacturers to assemble and package different micro-scale, multi-technology components in more efficient and cost-effective manners. As the size of the components gets smaller, issues such as part sticking and alignment precision create challenges that slow the throughput of conventional robotic pick-n-place systems. As an alternative, various self-assembly approaches have been proposed to manipulate micro to millimeter scale components in a parallel fashion without human or robotic intervention. In this dissertation, magnetic self-assembly (MSA) is demonstrated as a highly efficient, completely parallel process for assembly of millimeter scale components. MSA is achieved by integrating permanent micromagnets onto component bonding surfaces using wafer-level microfabrication processes. Embedded bonded powder methods are used for fabrication of the magnets. The magnets are then magnetized using pulse magnetization methods, and the wafers are then singulated to form individual components. When the components are randomly mixed together, self-assembly occurs when the intermagnetic forces overcome the mixing forces. Analytical and finite element methods (FEM) are used to study the force interactions between the micromagnets. The multifunctional aspects of MSA are presented through demonstration of part-to-part and part-to-substrate assembly of 1 mm x 1mm x 0.5 mm silicon components. Part-to-part assembly is demonstrated by batch assembly of free-floating parts in a liquid environment with the assembly yield of different magnetic patterns varying from 88% to 90% in 20 s. Part-to-substrate assembly is demonstrated by assembling an ordered array onto a fixed substrate in a dry environment with the assembly yield varying from 86% to 99%. In both cases, diverse magnetic shapes/patterns are used to control the alignment and angular orientation of the components. A mathematical model is

  16. Living musical instruments and inanimate body parts?

    PubMed

    Barbarotto, R; Capitani, E; Laiacona, M

    2001-01-01

    In the literature about category effects in semantic memory, body parts and musical instruments are often considered atypical, because in cases with a disproportionate impairment of living categories body parts are relatively spared, while musical instruments are often severely defective. In this study the performance of 57 subjects affected by diseases generally associated with lexical-semantic impairment, for the most part Alzheimer's disease and other forms of cortical degeneration, but also herpetic encephalitis and traumatic brain damage are analyzed. The subjects were given a picture naming task tapping eight categories: three living categories (animals, fruits and vegetables) and three non-living categories (tools, furniture and vehicles), plus body parts and musical instruments. On a preliminary analysis at the group level, body parts were the least impaired category and musical instruments the most severely impaired, the six living and non-living categories being intermediate. However, these differences disappeared after covariance for lexical frequency, name agreement and age of acquisition. The relationship between living categories, non-living categories, musical instruments and body parts was investigated by means of a Lisrel model of Confirmatory Factor Analysis. Two latent variables related to living and non-living categories respectively were defined, and it was found that both body parts and musical instruments were significantly related only with non-living categories. The results showed that the definition of the latent variable expressing the substrate of non-living categories was less satisfactory than that expressing the living categories. On this basis, the conclusions of this study appear statistically definite but their psychological interpretation is less straightforward.

  17. [Part-time residency training in Israel].

    PubMed

    Fishbain, Dana; Levi, Baruch; Borow, Malke; Ashkenazi, Shai; Lindner, Arie

    2012-08-01

    Full-time work has long been perceived as a cornerstone of medical residency, the consensus being that a resident must apply the bulk of his time and attention to his professional training. Demographic and cultural changes that have taken place over the last several years, specifically the rise in the number of female doctors and the importance of leisure time to the younger generation, have intensified the need to find new and innovative ways to deal with the plight of the resident population. One idea, already in effect in many Western countries, is the institution of part-time residency programs. The possibility of fulfilling residency requirements on a part-time basis is intended to assist medical residents in integrating their professional development with their personal and family life, without compromising the quality of their training. A number of research studies conducted over the last several years in countries that allow part-time residency, among them the United States, England and Switzerland, aimed to examine the quality of part-time training. The various studies evinced a high level of satisfaction from the program both by the residents themselves and their supervisors, and in many aspects those doing residency part-time received higher appraisals than their full-time colleagues. Some of the residents polled noted that they would have totally foregone the practice of medicine had there not been an option to complete residency part-time. In light of the experience throughout the world and the changing landscape in Israel, the Scientific Council of the Israeli Medical Association decided to examine the issue and its various aspects, and weighed all the considerations in favor and against part-time residency. Recently, the Scientific Council approved the launch of a pilot program to allow part-time residency in several fields that were carefully selected according to specific criteria. Once the Ministry of Health completes the LegisLation process, part

  18. Tactile mental body parts representation in obesity.

    PubMed

    Scarpina, Federica; Castelnuovo, Gianluca; Molinari, Enrico

    2014-12-30

    Obese people׳s distortions in visually-based mental body-parts representations have been reported in previous studies, but other sensory modalities have largely been neglected. In the present study, we investigated possible differences in tactilely-based body-parts representation between an obese and a healthy-weight group; additionally we explore the possible relationship between the tactile- and the visually-based body representation. Participants were asked to estimate the distance between two tactile stimuli that were simultaneously administered on the arm or on the abdomen, in the absence of visual input. The visually-based body-parts representation was investigated by a visual imagery method in which subjects were instructed to compare the horizontal extension of body part pairs. According to the results, the obese participants overestimated the size of the tactilely-perceived distances more than the healthy-weight group when the arm, and not the abdomen, was stimulated. Moreover, they reported a lower level of accuracy than did the healthy-weight group when estimating horizontal distances relative to their bodies, confirming an inappropriate visually-based mental body representation. Our results imply that body representation disturbance in obese people is not limited to the visual mental domain, but it spreads to the tactilely perceived distances. The inaccuracy was not a generalized tendency but was body-part related.

  19. Developmental differences in part/whole identification.

    PubMed

    Prather, P A; Bacon, J

    1986-06-01

    At issue in the present research was whether or not preschoolers are able to simultaneously perceive multiple aspects of an object. This issue was examined in 2 experiments in which 3-5-year-olds were asked to describe part/whole pictures (e.g., a "house made of crayons"). Prior developmental research has suggested that preschoolers typically fail to name both part and whole aspects of such pictures. In the present study, parts and wholes ranged from relatively "simple" to relatively "difficult" for preschoolers to identify and label. The results showed that even 3-year-olds frequently named both part and whole aspects of our "simple" pictures but were significantly less likely to name both aspects of more "difficult" pictures. Overall, the results suggest that multiple-aspect perception is available as early as 3 years of age, and that preschoolers' failure in previous studies to explicitly identify both part and whole aspects of the same object may reflect failure in verbal or metacognitive skills rather than in children's ability to perceive multiple aspects of an object. PMID:3720392

  20. Prediction of Part Distortion in Die Casting

    SciTech Connect

    R. Allen Miller

    2005-03-30

    The die casting process is one of the net shape manufacturing techniques and is widely used to produce high production castings with tight tolerances for many industries. An understanding of the stress distribution and the deformation pattern of parts produced by die casting will result in less deviation from the part design specification, a better die design and eventually more productivity and cost savings. This report presents methods that can be used to simulate the die casting process in order to predict the deformation and stresses in the produced part and assesses the degree to which distortion modeling is practical for die casting at the current time. A coupled thermal-mechanical finite elements model was used to simulate the die casting process. The simulation models the effect of thermal and mechanical interaction between the casting and the die. It also includes the temperature dependant material properties of the casting. Based on a designed experiment, a sensitivity analysis was conducted on the model to investigate the effect of key factors. These factors include the casting material model, material properties and thermal interaction between casting and dies. To verify the casting distortion predictions, it was compared against the measured dimensions of produced parts. The comparison included dimensions along and across the parting plane and the flatness of one surface.

  1. Part Marking and Identification Materials on MISSE

    NASA Technical Reports Server (NTRS)

    Finckenor, Miria M.; Roxby, Donald L.

    2008-01-01

    Many different spacecraft materials were flown as part of the Materials on International Space Station Experiment (MISSE), including several materials used in part marking and identification. The experiment contained Data Matrix symbols applied using laser bonding, vacuum arc vapor deposition, gas assisted laser etch, chemical etch, mechanical dot peening, laser shot peening, and laser induced surface improvement. The effects of ultraviolet radiation on nickel acetate seal versus hot water seal on sulfuric acid anodized aluminum are discussed. These samples were exposed on the International Space Station to the low Earth orbital environment of atomic oxygen, ultraviolet radiation, thermal cycling, and hard vacuum, though atomic oxygen exposure was very limited for some samples. Results from the one-year exposure on MISSE-3 and MISSE-4 are compared to those from MISSE-1 and MISSE-2, which were exposed for four years. Part marking and identification materials on the current MISSE -6 experiment are also discussed.

  2. Pharmaceutical advertising and Medicare Part D.

    PubMed

    Lakdawalla, Darius; Sood, Neeraj; Gu, Qian

    2013-12-01

    We explore how and to what extent prescription drug insurance expansions affect incentives for pharmaceutical advertising. When insurance expansions make markets more profitable, firms respond by boosting advertising. Theory suggests this effect will be magnified in the least competitive drug classes, where firms internalize a larger share of the benefits from advertising. Empirically, we find that the implementation of Part D coincides with a 14-19% increase in total advertising expenditures. This effect is indeed concentrated in the least competitive drug classes. The additional advertising raised utilization among non-elderly patients outside the Part D program by about 3.6%. This is roughly half of the direct utilization effect of Part D on elderly beneficiaries. The results suggest the presence of considerable spillover effects from publicly subsidized prescription drug insurance on the utilization and welfare of consumers outside the program. PMID:24308884

  3. Custom impression trays. Part II: Removal forces.

    PubMed

    Dixon, D L; Breeding, L C; Moseley, J P

    1994-03-01

    When choosing a material for making custom impression trays, it is important to understand the forces to which the tray will be subjected during removal of the completed impression from the oral cavity. Such forces have not been recorded in the dental literature. The purpose of Part II of this three-part series was to record these forces in vitro, using two different tray-removal methods. A polymethyl methacrylate custom tray was used during this study. Results from this investigation indicated that it is easier to remove a completed impression, made with a custom tray, by a single point of anterior force application (224 N) than by force application evenly around the tray (514 N). The recorded force values from this investigation will be used in Part III of this series.

  4. Pharmaceutical advertising and Medicare Part D.

    PubMed

    Lakdawalla, Darius; Sood, Neeraj; Gu, Qian

    2013-12-01

    We explore how and to what extent prescription drug insurance expansions affect incentives for pharmaceutical advertising. When insurance expansions make markets more profitable, firms respond by boosting advertising. Theory suggests this effect will be magnified in the least competitive drug classes, where firms internalize a larger share of the benefits from advertising. Empirically, we find that the implementation of Part D coincides with a 14-19% increase in total advertising expenditures. This effect is indeed concentrated in the least competitive drug classes. The additional advertising raised utilization among non-elderly patients outside the Part D program by about 3.6%. This is roughly half of the direct utilization effect of Part D on elderly beneficiaries. The results suggest the presence of considerable spillover effects from publicly subsidized prescription drug insurance on the utilization and welfare of consumers outside the program.

  5. Pharmaceutical Advertising and Medicare Part D

    PubMed Central

    Lakdawalla, Darius; Sood, Neeraj; Gu, Qian

    2013-01-01

    We explore how and to what extent prescription drug insurance expansions affects incentives for pharmaceutical advertising. When insurance expansions make markets more profitable, firms respond by boosting advertising. Theory suggests this effect will be magnified in the least competitive drug classes, where firms internalize a larger share of the benefits from advertising. Empirically, we find that the implementation of Part D coincides with a 14% to 19% increase in total advertising expenditures. This effect is indeed concentrated in the least competitive drug classes. The additional advertising raised utilization among non-elderly patients outside the Part D program by about 3.6%. This is roughly half of the direct utilization effect of Part D on elderly beneficiaries. The results suggest the presence of considerable spillover effects from publicly subsidized prescription drug insurance on the utilization and welfare of consumers outside the program. PMID:24308884

  6. Pharmacogenomics: from cell to clinic (Part 1).

    PubMed

    Siest, Gérard; Medeiros, Rui; Melichar, Bohuslav; Stathopoulou, Maria; Van Schaik, Ron H N; Cacabelos, Ramon; Abt, Peter Meier; Monteiro, Carolino; Gurwitz, David; Queiroz, Jao; Mota-Filipe, Helder; Ndiaye, Ndieye Coumba; Visvikis-Siest, Sophie

    2014-04-01

    The second international European Society of Pharmacogenomics and Theranostics (ESPT) conference was organized in Lisbon, Portugal, and attracted 250 participants from 37 different countries. The participants could listen to 50 oral presentations, participate in five lunch symposia and were able to view 83 posters and an exhibition. The first part of this Conference Scene will focus on the pharmacogenomics and biomarkers used in medical oncology, and in particular solid tumors. In addition, this article covers the two keynote conference introductory lectures by Ann K Daly and Magnus Ingelman-Sundberg. The second part of this article will discuss the clinical implementation of pharmacogenomic tests; the role of transports and pharmacogenomics; how stem cells and other new tools are helping the development of pharmacogenomics and drug discovery; and an update on the clinical translation of pharmacogenomics to personalized medicine. Part two of this Conference Scene will be featured in the next issue of Pharmacogenomics.

  7. Software for integrated manufacturing systems, part 2

    NASA Technical Reports Server (NTRS)

    Volz, R. A.; Naylor, A. W.

    1987-01-01

    Part 1 presented an overview of the unified approach to manufacturing software. The specific characteristics of the approach that allow it to realize the goals of reduced cost, increased reliability and increased flexibility are considered. Why the blending of a components view, distributed languages, generics and formal models is important, why each individual part of this approach is essential, and why each component will typically have each of these parts are examined. An example of a specification for a real material handling system is presented using the approach and compared with the standard interface specification given by the manufacturer. Use of the component in a distributed manufacturing system is then compared with use of the traditional specification with a more traditional approach to designing the system. An overview is also provided of the underlying mechanisms used for implementing distributed manufacturing systems using the unified software/hardware component approach.

  8. Workplace Bullying in Healthcare: Part 1.

    PubMed

    Lamberth, Becky

    2015-01-01

    Bullying is a repetitive and a busive behavior in which the victim suffers from abuse, humiliation, or intimidation to such an extent that it interferes with job performance. Victims of bullying have three possible legal solutions: harassment, hostile work environment, and intentional/negligent infliction of emotional distress. However, the elements necessary to fulfill the legal definitions are subjective and difficult at best to satisfy. Hospitals are hesitant to terminate any employee, which would result in open staff positions that are difficult to fill. Replacing staff with specific skills, costly. This make recruitmen cost a significant factor in retaining staff members who demonstrate poor behavior. Part 1 will focus on terminology and concerns related to bullying. Part 2 will discuss the legal protection afforded the bully and possible organizational solutions. Part 3 will address managers who have been accused of bullying by disgruntled employees and what to do about it. PMID:26710552

  9. Current and Future Parts Management at NASA

    NASA Technical Reports Server (NTRS)

    Sampson, Michael J.

    2011-01-01

    This presentation provides a high level view of current and future electronic parts management at NASA. It describes a current perspective of the new human space flight direction that NASA is beginning to take and how that could influence parts management in the future. It provides an overview of current NASA electronic parts policy and how that is implemented at the NASA flight Centers. It also describes some of the technical challenges that lie ahead and suggests approaches for their mitigation. These challenges include: advanced packaging, obsolescence and counterfeits, the global supply chain and Commercial Crew, a new direction by which NASA will utilize commercial launch vehicles to get astronauts to the International Space Station.

  10. Pharmacogenomics: from cell to clinic (Part 1).

    PubMed

    Siest, Gérard; Medeiros, Rui; Melichar, Bohuslav; Stathopoulou, Maria; Van Schaik, Ron H N; Cacabelos, Ramon; Abt, Peter Meier; Monteiro, Carolino; Gurwitz, David; Queiroz, Jao; Mota-Filipe, Helder; Ndiaye, Ndieye Coumba; Visvikis-Siest, Sophie

    2014-04-01

    The second international European Society of Pharmacogenomics and Theranostics (ESPT) conference was organized in Lisbon, Portugal, and attracted 250 participants from 37 different countries. The participants could listen to 50 oral presentations, participate in five lunch symposia and were able to view 83 posters and an exhibition. The first part of this Conference Scene will focus on the pharmacogenomics and biomarkers used in medical oncology, and in particular solid tumors. In addition, this article covers the two keynote conference introductory lectures by Ann K Daly and Magnus Ingelman-Sundberg. The second part of this article will discuss the clinical implementation of pharmacogenomic tests; the role of transports and pharmacogenomics; how stem cells and other new tools are helping the development of pharmacogenomics and drug discovery; and an update on the clinical translation of pharmacogenomics to personalized medicine. Part two of this Conference Scene will be featured in the next issue of Pharmacogenomics. PMID:24798716

  11. Air resistance measurements on actual airplane parts

    NASA Technical Reports Server (NTRS)

    Weiselsberger, C

    1923-01-01

    For the calculation of the parasite resistance of an airplane, a knowledge of the resistance of the individual structural and accessory parts is necessary. The most reliable basis for this is given by tests with actual airplane parts at airspeeds which occur in practice. The data given here relate to the landing gear of a Siemanms-Schuckert DI airplane; the landing gear of a 'Luftfahrzeug-Gesellschaft' airplane (type Roland Dlla); landing gear of a 'Flugzeugbau Friedrichshafen' G airplane; a machine gun, and the exhaust manifold of a 269 HP engine.

  12. Is Mexico part of North America?

    NASA Astrophysics Data System (ADS)

    Urrutia-Fucugauchi, Jaime

    This question was raised by AGU Foreign Secretary Juan Roederer during an honors banquet at a recent AGU Fall Meeting in San Francisco, Calif. It is an interesting question, hard to answer, or perhaps with too many individual answers.We are not geographically a part of Central America or South America, although we do share language, Indian culture, Spanish heritage, and other characteristics, and these factors do play a role, as do economics and politics. However, geographically, Mexico is part of the North American continent.

  13. Treatment of cellulite: Part I. Pathophysiology.

    PubMed

    Khan, Misbah H; Victor, Frank; Rao, Babar; Sadick, Neil S

    2010-03-01

    Cellulite is a topographic skin change that is nearly ubiquitous in postpubertal women. Treatment remains elusive. The various treatments currently available are only partially or temporarily effective. Newer therapeutic modalities continue to evolve without much understanding of the complex nature of cellulite. The successful treatment of cellulite will ultimately depend upon our understanding of the pathophysiology of cellulite adipose tissue. Part I of this two-part series on cellulite reviews how the concept and perception of cellulite has evolved over time and its proposed etiologies. The article also focuses on the physiology of human adipose tissue, particularly regarding cellulite.

  14. Visual inspection reliability for precision manufactured parts

    SciTech Connect

    See, Judi E.

    2015-09-04

    Sandia National Laboratories conducted an experiment for the National Nuclear Security Administration to determine the reliability of visual inspection of precision manufactured parts used in nuclear weapons. In addition visual inspection has been extensively researched since the early 20th century; however, the reliability of visual inspection for nuclear weapons parts has not been addressed. In addition, the efficacy of using inspector confidence ratings to guide multiple inspections in an effort to improve overall performance accuracy is unknown. Further, the workload associated with inspection has not been documented, and newer measures of stress have not been applied.

  15. Globalization in the pharmaceutical industry, Part II.

    PubMed

    Casadio Tarabusi, C; Vickery, G

    1998-01-01

    This is the second of a two-part report on the pharmaceutical industry. Part II begins with a discussion of foreign direct investment and inter-firm networks, which covers international mergers, acquisitions, and minority participation; market shares of foreign-controlled firms; international collaboration agreements (with a special note on agreements in biotechnology); and licensing agreements. The final section of the report covers governmental policies on health and safety regulation, price regulation, industry and technology, trade, foreign investment, protection of intellectual property, and competition. PMID:9595345

  16. Compressor Has No Moving Macroscopic Parts

    NASA Technical Reports Server (NTRS)

    Gasser, Max

    1995-01-01

    Compressor containing no moving macroscopic parts functions by alternating piston and valve actions of successive beds of magnetic particles. Fabricated easily because no need for precisely fitting parts rotating or sliding on each other. Also no need for lubricant fluid contaminating fluid to be compressed. Compressor operates continuously, eliminating troublesome on/off cycling of other compressors, and decreasing consumption of energy. Phased cells push fluid from bottom to top, adding increments of pressure. Each cell contains magnetic powder particles loose when electromagnet coil deenergized, but tightly packed when coil energized.

  17. Iridium/Rhenium Parts For Rocket Engines

    NASA Technical Reports Server (NTRS)

    Schneider, Steven J.; Harding, John T.; Wooten, John R.

    1991-01-01

    Oxidation/corrosion of metals at high temperatures primary life-limiting mechanism of parts in rocket engines. Combination of metals greatly increases operating temperature and longevity of these parts. Consists of two transition-element metals - iridium and rhenium - that melt at extremely high temperatures. Maximum operating temperature increased to 2,200 degrees C from 1,400 degrees C. Increases operating lifetimes of small rocket engines by more than factor of 10. Possible to make hotter-operating, longer-lasting components for turbines and other heat engines.

  18. Parts Quality Management: Direct Part Marking of Data Matrix Symbol for Mission Assurance

    NASA Technical Reports Server (NTRS)

    Moss, Chantrice; Chakrabarti, Suman; Scott, David W.

    2013-01-01

    A United States Government Accountability Office (GAO) review of twelve NASA programs found widespread parts quality problems contributing to significant cost overruns, schedule delays, and reduced system reliability. Direct part marking with Data Matrix symbols could significantly improve the quality of inventory control and parts lifecycle management. This paper examines the feasibility of using direct part marking technologies for use in future NASA programs. A structural analysis is based on marked material type, operational environment (e.g., ground, suborbital, Low Earth Orbit), durability of marks, ease of operation, reliability, and affordability. A cost-benefits analysis considers marking technology (label printing, data plates, and direct part marking) and marking types (two-dimensional machine-readable, human-readable). Previous NASA parts marking efforts and historical cost data are accounted for, including inhouse vs. outsourced marking. Some marking methods are still under development. While this paper focuses on NASA programs, results may be applicable to a variety of industrial environments.

  19. Parts quality management: Direct part marking of data matrix symbol for mission assurance

    NASA Astrophysics Data System (ADS)

    Moss, Chantrice; Chakrabarti, Suman; Scott, David W.

    A United States Government Accountability Office (GAO) review of twelve NASA programs found widespread parts quality problems contributing to significant cost overruns, schedule delays, and reduced system reliability. Direct part marking with Data Matrix symbols could significantly improve the quality of inventory control and parts lifecycle management. This paper examines the feasibility of using direct part marking technologies for use in future NASA programs. A structural analysis is based on marked material type, operational environment (e.g., ground, suborbital, Low Earth Orbit), durability of marks, ease of operation, reliability, and affordability. A cost-benefits analysis considers marking technology (label printing, data plates, and direct part marking) and marking types (two-dimensional machine-readable, human-readable). Previous NASA parts marking efforts and historical cost data are accounted for, including in-house vs. outsourced marking. Some marking methods are still under development. While this paper focuses on NASA programs, results may be applicable to a variety of industrial environments.

  20. Part-Time Teachers--or Teachers, Who Work Part-Time?

    ERIC Educational Resources Information Center

    Pollington, Mary

    The first and most often cited problem of part-time teachers is the question of remuneration. Most part-timers are paid a per-course amount which almost never represents a true pro-rata proportion of a full-time salary at the same institution. Another problem which often concerns part-timers is that they are not eligible for health insurance or…

  1. 45 CFR Appendix A to Part 13 - Appendix A to Part 13

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... device premarket approval applications 21 U.S.C. 306e(e), (g) 21 CFR part 12. Office for Civil Rights 1...); 1395bbb(c)(1); 1396b(m)(5)(B); 1396r(b)(3)(B)(ii), (g)(2)(A)(i); 1396t(i)(3); 11131(c); 11137(b)(2) 42 CFR part 1003; 42 CFR part 1005. 2. Appeals of exclusions from Medicare and State health care programs...

  2. Unified Modern Mathematics, Course 2, Part 1.

    ERIC Educational Resources Information Center

    Secondary School Mathematics Curriculum Improvement Study, New York, NY.

    This is Part 1 of the second course in a series which focuses on building fundamental mathematical structures. Topics considered in this book include: an introduction to mathematical logic and mathematical proof, a continuation of the study of groups, an introduction to axiomatic affine geometry, fields, the real number system, and coordinate…

  3. Unified Modern Mathematics, Course 3, Part 1.

    ERIC Educational Resources Information Center

    Secondary School Mathematics Curriculum Improvement Study, New York, NY.

    The first part of Course III focuses on matrix algebra, graphs and functions, and combinatorics. Topics studied include: matrices and transformations, the solution of systems of linear equations, matrix multiplication, matrix inversion and a field of 2 x 2 matrices. The section on graphs and functions considers regions of the plane and…

  4. Book Design, Part IV: Back Matter.

    ERIC Educational Resources Information Center

    Harms, Jeanne McLain; Lettow, Lucille

    1997-01-01

    The fourth part in a series on book design, this article examines the pages following the main body of a book. Discusses and illustrates the relocation of traditional "front matter": copyright, cataloging information, dedications, and acknowledgments; source notes, including origins, music, photographs; supplemental information related to the main…

  5. Laser welding of micro plastic parts

    NASA Astrophysics Data System (ADS)

    Haberstroh, E.; Hoffmann, W.-M.

    2007-02-01

    Most welding processes for plastics do not meet the demands of micro technology and thus cannot be applied in this innovative industrial sector. One of the few techniques which are applicable in this sector is the laser transmission welding, which has distinctive advantages like low mechanical and thermal load of the joining parts. This makes the laser particularly suitable for the welding of micro plastics parts. Thereby, contour welding is a process variant of laser transmission welding enabling the welding of complex and even three-dimensional weld contours. But so far it has not yet been applied for welding plastics parts of micro scale in the industrial practice. Recent research at the Institute of Plastics Processing (IKV) at the RWTH Aachen University shows the feasibility of this process to weld small and complex micro parts. Good mechanical properties can be achieved. However, it is necessary to apply measures to reduce the formation of flash. Moreover, it can be shown that there is a strong influence of some material parameters on the laser welding process so that some plastics are more suitable than others for the contour welding in micro technology.

  6. 49 CFR Appendix to Part 10 - Exemptions

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Aviation Security Policy and Planning, Federal Aviation Administration. 6. Suspected Unapproved Parts (SUP... and Security at headquarters and FAA Regional and Center Security Divisions (DOT/FAA 815). These... Security in Washington, DC; the FAA regional Civil Aviation Security Divisions; the Civil Aviation...

  7. Effective Management of Part-Time Lecturers.

    ERIC Educational Resources Information Center

    Walker, Elizabeth; Betts, Derek; Dominey, Jan; Goulding, Jeanne

    The approaches to management of part-time lecturing staff in the United Kingdom's further education (FE) colleges were examined in a study that included the following research activities: review of relevant publications and Further Education Funding Council (FEFC) statistics; postal survey of 454 FE colleges in England and Wales that elicited 67…

  8. Part-time Jobs at Lianda.

    ERIC Educational Resources Information Center

    Xian, Sheng; And Others

    1988-01-01

    Recounts the varied work experiences of students at Southwest Associated University (Lianda University) in the 1940s. Describes the ways in which specific individuals responded to the need for part-time jobs. These accounts provide a sense of the ways in which employment redefined the college experience. (KO)

  9. 77 FR 39201 - 16 CFR Part 23

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-02

    ... FR 27178 (May 30, 1996). As part of these changes, the industry guides formerly known as ``Guides for... guides, 62 FR 16669 (Apr. 8, 1997). \\4\\ Federal Trade Commission: Guides for the Jewelry, Precious Metals..., 64 FR 33193 (June 22, 1999). \\5\\ Federal Trade Commission: Guides for the Jewelry, Precious...

  10. Unified Modern Mathematics, Course 3, Part 2.

    ERIC Educational Resources Information Center

    Secondary School Mathematics Curriculum Improvement Study, New York, NY.

    The second part of Course III includes a study of probability, polynomial, rational and circular functions, and informal space geometry. The chapter on probability presents such topics as probability measure, outcome sets and events, and overview of topics studied in Courses I and II. Chapters on functions include polynomial algebra concepts and…

  11. Unified Modern Mathematics, Course 2, Part 2.

    ERIC Educational Resources Information Center

    Secondary School Mathematics Curriculum Improvement Study, New York, NY.

    Topics included in Part 2 of Course II are: real functions; descriptive statistics; transformations in the plane; length, area, and volume; combinatorics; and mass points. The chapter on real functions includes a discussion of properties of functions, composition of functions, inverses of functions and other topics. The chapter on descriptive…

  12. 30 CFR 33.38 - Electrical parts.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Electrical parts. 33.38 Section 33.38 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL MINES Test...

  13. 30 CFR 33.38 - Electrical parts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Electrical parts. 33.38 Section 33.38 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL MINES Test...

  14. 30 CFR 33.38 - Electrical parts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Electrical parts. 33.38 Section 33.38 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL MINES Test...

  15. Experimental Mathematics in the Curriculum (Part 1)

    ERIC Educational Resources Information Center

    Ward, J. P.

    2006-01-01

    Much of modern mathematical research requires a serious level of commitment and ability on the part of the researcher and, as a natural consequence, precludes any real involvement by undergraduate mathematicians. However, to put it crudely, Computer Algebra Systems, can make experts of us all. With the use of such systems even the average…

  16. Experimental Mathematics in the Curriculum (Part 2)

    ERIC Educational Resources Information Center

    Ward, J. P.

    2007-01-01

    In part 1 of this work we showed how modern mathematical research could, with a suitably chosen problem, be included in the first year curriculum of undergraduate mathematicians. With the use of Computer Algebra Systems, even the average undergraduate mathematician can aspire to discover interesting yet still unexplained behaviour in many areas of…

  17. The Metis Nation--Part Two II.

    ERIC Educational Resources Information Center

    Dorian, John

    1978-01-01

    This article deals with historical events involving the Metis people from the time Manitoba entered the Confederation to the conclusion of the 1885 battle at Fish Creek near Batoche, Saskatchewan. Part I is in the Summer, 1978 issue of the Northian. (Author/RTS)

  18. Inquiry and Living History, Part II

    ERIC Educational Resources Information Center

    Coatney, Sharon; Smalley, Rachel

    2006-01-01

    In the first part of this article, the authors introduced the living history program. This yearly, weeklong program features living portrayals of famous people, which becomes a catalyst for teaching curricular standards, as well as providing the spark for inquiry. Successful implementation of this program requires providing teachers with…

  19. Faculty Handbook. Part II. Improving Teaching.

    ERIC Educational Resources Information Center

    Department of Agriculture Graduate School, Washington, DC.

    Part of a faculty handbook by the Graduate School of the U.S. Department of Agriculture, this section reviews and discusses research on adult characteristics and adult learning, (including effects of group structure), the setting of course objectives, conditions required for an effective learning experience, teaching methods, and techniques for…

  20. How to Get Published, Part I

    ERIC Educational Resources Information Center

    Lonergan, David

    2011-01-01

    Some librarians are required to publish a certain amount as part of earning tenure. Some choose to do research and write articles as a form of self-expression, because of intellectual curiosity, or perhaps to justify bearing faculty status. For whatever reason(s) librarians might want (or need) to see their own work in print, this article offers…

  1. Social Security and Part-Time Employment.

    ERIC Educational Resources Information Center

    Euzeby, Alain

    1988-01-01

    Discusses rules governing social security and their implications for part-time employees in various countries. Topics include (1) methods of financing social security, (2) benefits, (3) measures concerning the unemployed, (4) a floor for employers' contributions, (5) graduated contribution rates, and (6) financial incentives. (CH)

  2. A New Road to Reactions: Part 2.

    ERIC Educational Resources Information Center

    de Vos, Wobbe; Verdonk, Adri H.

    1985-01-01

    Describes a precipitation experiment which follows a yellow powder experiment discussed in part 1 (vol 62 no 3 p238-40). Advantages of using a Petri dish to perform the experiment, laboratory procedures used, instructional strategies, and implications for chemistry curriculum and instruction are discussed. (JN)

  3. 36 CFR Appendix - Figures to Part 1194

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Figures to Part 1194 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD ELECTRONIC AND INFORMATION TECHNOLOGY ACCESSIBILITY STANDARDS Information, Documentation, and Support...

  4. 16 CFR Appendix to Part 460 - Exemptions

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION Pt. 460, App. Appendix to Part 460—Exemptions Section 18(g)(2) of the Federal Trade Commission Act, 15 U.S... trade regulation rule if the Commission finds that application of the rule is not necessary to...

  5. 16 CFR Appendix to Part 460 - Exemptions

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION Pt. 460, App. Appendix to Part 460—Exemptions Section 18(g)(2) of the Federal Trade Commission Act, 15 U.S... trade regulation rule if the Commission finds that application of the rule is not necessary to...

  6. 16 CFR Appendix to Part 460 - Exemptions

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION Pt. 460, App. Appendix to Part 460—Exemptions Section 18(g)(2) of the Federal Trade Commission Act, 15 U.S... trade regulation rule if the Commission finds that application of the rule is not necessary to...

  7. 16 CFR Appendix to Part 460 - Exemptions

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION Pt. 460, App. Appendix to Part 460—Exemptions Section 18(g)(2) of the Federal Trade Commission Act, 15 U.S... trade regulation rule if the Commission finds that application of the rule is not necessary to...

  8. 16 CFR Appendix to Part 460 - Exemptions

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION Pt. 460, App. Appendix to Part 460—Exemptions Section 18(g)(2) of the Federal Trade Commission Act, 15 U.S... trade regulation rule if the Commission finds that application of the rule is not necessary to...

  9. 36 CFR Appendix - Figures to Part 1192

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false Figures to Part 1192 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Other Vehicles and Systems Trams, similar vehicles and systems. Pt....

  10. 36 CFR Appendix - Figures to Part 1194

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false Figures to Part 1194 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD ELECTRONIC AND INFORMATION TECHNOLOGY ACCESSIBILITY STANDARDS Information, Documentation, and Support Information, documentation, and support. Pt. 1194,...

  11. 36 CFR Appendix - Figures to Part 1192

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 36 Parks, Forests, and Public Property 3 2013-07-01 2012-07-01 true Figures to Part 1192 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Other Vehicles and Systems Trams, similar vehicles and systems. Pt....

  12. 36 CFR Appendix - Figures to Part 1194

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 36 Parks, Forests, and Public Property 3 2013-07-01 2012-07-01 true Figures to Part 1194 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD ELECTRONIC AND INFORMATION TECHNOLOGY ACCESSIBILITY STANDARDS Information, Documentation, and Support Information, documentation, and support. Pt. 1194,...

  13. 36 CFR Appendix - Figures to Part 1194

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false Figures to Part 1194 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD ELECTRONIC AND INFORMATION TECHNOLOGY ACCESSIBILITY STANDARDS Information, Documentation, and Support Information, documentation, and support. Pt. 1194,...

  14. 36 CFR Appendix - Figures to Part 1192

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false Figures to Part 1192 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Other Vehicles and Systems Trams, similar vehicles and systems. Pt....

  15. Using Part-Time Faculty Effectively.

    ERIC Educational Resources Information Center

    Parsons, Michael H., Ed.

    1980-01-01

    In the first section of this collection of essays on part-time faculty development, Carol Eliason outlines the problems inherent in current staff development practices and a systems approach to their solution. Then, David Harris voices concerns and challenges from the college president's perspective. Richard Smith explains the benefits of…

  16. A Fundamental Breakdown. Part II: Manipulative Skills

    ERIC Educational Resources Information Center

    Townsend, J. Scott; Mohr, Derek J.

    2005-01-01

    In the May, 2005, issue of "TEPE," the "Research to Practice" section initiated a two-part series focused on assessing fundamental locomotor and manipulative skills. The series was generated in response to research by Pappa, Evanggelinou, & Karabourniotis (2005), recommending that curricular programming in physical education at the elementary…

  17. 36 CFR Appendix - Figures to Part 1192

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Figures to Part 1192 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Other Vehicles and Systems Trams, similar vehicles and systems. Pt....

  18. 36 CFR Appendix - Figures to Part 1192

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Figures to Part 1192 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Other Vehicles and Systems Trams, similar vehicles and systems. Pt....

  19. 36 CFR Appendix - Figures to Part 1194

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Figures to Part 1194 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD ELECTRONIC AND INFORMATION TECHNOLOGY ACCESSIBILITY STANDARDS Information, Documentation, and Support Information, documentation, and support. Pt. 1194,...

  20. Storytime with Fresh Professor, Part One

    ERIC Educational Resources Information Center

    Miles, James

    2016-01-01

    James Miles writes that he wasn't always the Fresh Professor. At one point, he was just another starving actor, trying to make a living. But stories change over time, as do professional desires. This article presents Part One of his story.

  1. Sexual Harassment, Parts I, II, and III.

    ERIC Educational Resources Information Center

    Douglas, Joel M., Ed.

    1992-01-01

    Three separate newsletter issues examine the issue of sexual harassment on college campuses. Part I contains a general introduction to the topic and two articles. The first of these discusses the definition of sexual harassment by the United States Equal Employment Opportunity Commission (EEOC) and the courts, the EEOC guidelines on conduct of a…

  2. Further Education; Part-Time Teachers Speak.

    ERIC Educational Resources Information Center

    Styler, W.E.

    Based on the reports of forty-four experienced part time teachers, this pamphlet examines the overall situation in the evening institutes in the West and East Ridings of Yorkshire. Subjects covered include: subject and special problems, teaching aims, kind of students, difficulties, effective teaching, and lessons learned by teachers. The age…

  3. Making Diversity Awareness Part of Your Teaching.

    ERIC Educational Resources Information Center

    Kirk, Rea; Nkemnji, John; Gudgeon, Katherine; Hardy, Sarah; Hooker, Gina; Lowry, Mark; Roberts, Brionne

    This paper presents a series of interactive activities designed to help educators make diversity awareness part of their teaching. The activities are: "Best Friends," which helps people recognize the role race plays in their perceptions of people and in their values; "Conclusion Jumping," which helps people identify common stereotypes and raise…

  4. Structure Property Studies for Additively Manufactured Parts

    SciTech Connect

    Milenski, Helen M; Schmalzer, Andrew Michael; Kelly, Daniel

    2015-08-17

    Since the invention of modern Additive Manufacturing (AM) processes engineers and designers have worked hard to capitalize on the unique building capabilities that AM allows. By being able to customize the interior fill of parts it is now possible to design components with a controlled density and customized internal structure. The creation of new polymers and polymer composites allow for even greater control over the mechanical properties of AM parts. One of the key reasons to explore AM, is to bring about a new paradigm in part design, where materials can be strategically optimized in a way that conventional subtractive methods cannot achieve. The two processes investigated in my research were the Fused Deposition Modeling (FDM) process and the Direct Ink Write (DIW) process. The objectives of the research were to determine the impact of in-fill density and morphology on the mechanical properties of FDM parts, and to determine if DIW printed samples could be produced where the filament diameter was varied while the overall density remained constant.

  5. Monitor displays in radiology: Part 1

    PubMed Central

    Indrajit, IK; Verma, BS

    2009-01-01

    Monitor displays are an integral part of today's radiology work environment, attached to workstations, USG, CT/MRI consoles and PACS terminals. For each modality and method of use, the correct display monitor needs to be deployed. It helps to have a basic understanding of how monitors work and what are the issues involved in their selection. PMID:19774135

  6. What Are HyperCard? (Part 2).

    ERIC Educational Resources Information Center

    Marcus, Stephen

    1989-01-01

    Presents the second article in a two-part series on HyperCard materials (computer software used to build structures that create patterns and connections) designed for English and language arts classes. Suggests assignments for use with early HyperCard software that can be adapted to a variety of nonverbal "stackware." (MM)

  7. Expressing Camp, Part 2: Using Key Messages.

    ERIC Educational Resources Information Center

    Schultz, Bob

    1996-01-01

    Camps can play an integral part in raising a child. The American Camping Association (ACA) has developed key messages that correspond to developmental needs of children. To portray a professional image of camp, promotional materials should incorporate these key messages, the benefits of ACA accreditation, and the same language as child development…

  8. Assessment for Learning: Researching Implementation (Part 2)

    ERIC Educational Resources Information Center

    Harlen, Wynne

    2009-01-01

    The first part of "Assessment for Learning" ("EiS", February 2009) summarised some of the research that led to the recognition of the benefit to be had from formative assessment. As noted there, hardly any of the studies had been carried out in normal classrooms, leaving questions over how to translate the general strategies identified in the…

  9. Fabrication of polyetheretherketone (PEEK) parts. Final report

    SciTech Connect

    Nelson, R.W.

    1991-12-01

    A literature search was conducted for polyetheretherketone (PEEK) thermoplastic to investigate its physical properties and molding applications. Simple molds were designed, built, and tested using PEEK molding compound. Molding parameters and shrink factors were determined. Physical properties varied with the percent of crystalline PEEK present. Annealing the molded parts enhanced their physical properties and increased the percent crystallinity. 11 refs.

  10. Part-Time Faculty: Nemesis or Savior?

    ERIC Educational Resources Information Center

    Vaughan, George B.

    1986-01-01

    Categorizes part-time faculty at two-year colleges as "independents," whose livelihoods and social and professional lives are independent of their teaching positions; and "dependents," who desire a full-time career in teaching. Reviews the groups' characteristics, arguing that they should be dealt with differently by administrators. Offers…

  11. Hypertension. Part 2: The Role of Medication.

    ERIC Educational Resources Information Center

    Tanji, Jeffrey L.

    1990-01-01

    Discusses the differences between exercise alone and exercise with medication (e.g., diuretics, beta blockers, and ACE inhibitors) for treating hypertensive patients. Guidelines are presented for physicians wanting to change the therapeutic regimen or to step down from medical therapy, noting exercise must always be part of the program. (SM)

  12. Parts Marketing. A Student Learning Guide.

    ERIC Educational Resources Information Center

    Ridge Vocational-Technical Center, Winter Haven, FL.

    This learning guide is a self-instructional packet for one task identified as essential for performance on an entry-level job in parts marketing. The guide is based on a terminal performance objective (task) and two enabling objectives. For each enabling objective, some or all of these materials may be presented: learning steps (outline of student…

  13. Respiratory system part 1: pulmonary ventilation.

    PubMed

    McLafferty, Ella; Johnstone, Carolyn; Hendry, Charles; Farley, Alistair

    This article, which forms part of the life sciences series and is the first of two articles on the respiratory system, describes the anatomy of the respiratory system and explains the mechanics of respiration. It provides a brief overview of three common respiratory disorders: pneumonia, pulmonary embolism and pulmonary tuberculosis. The second article discusses gaseous exchange and the control of ventilation in more detail.

  14. Vortices in normal part of proximity system

    SciTech Connect

    Kogan, V. G.

    2015-05-26

    It is shown that the order parameter Δ induced in the normal part of superconductor-normal-superconductor proximity system is modulated in the magnetic field differently from vortices in bulk superconductors. Whereas Δ turns zero at vortex centers, the magnetic structure of these vortices differs from that of Abrikosov's.

  15. 40 CFR Appendix - Tables to Part 132

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY GUIDANCE FOR THE GREAT... Tables to Part 132 Table 1—Acute Water Quality Criteria for Protection of Aquatic Life in Ambient Water... is the CMC expressed as a total concentration. Table 2—Chronic Water Quality Criteria for...

  16. 40 CFR Appendix - Tables to Part 132

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY GUIDANCE FOR THE GREAT... Tables to Part 132 Table 1—Acute Water Quality Criteria for Protection of Aquatic Life in Ambient Water... is the CMC expressed as a total concentration. Table 2—Chronic Water Quality Criteria for...

  17. 40 CFR Appendix - Tables to Part 132

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY GUIDANCE FOR THE GREAT... Tables to Part 132 Table 1—Acute Water Quality Criteria for Protection of Aquatic Life in Ambient Water... is the CMC expressed as a total concentration. Table 2—Chronic Water Quality Criteria for...

  18. 40 CFR Appendix - Tables to Part 132

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY GUIDANCE FOR THE GREAT... Tables to Part 132 Table 1—Acute Water Quality Criteria for Protection of Aquatic Life in Ambient Water... is the CMC expressed as a total concentration. Table 2—Chronic Water Quality Criteria for...

  19. Le Francais Courant: Part V, French.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    Instructional objectives of the Dade County Public Schools Quinmester Program in French for use with "Le Francais Courant: Part 5" focus on the development of mastery of the basic numbering system and other grammatical structures. Structures include the formation of the present tense of the irregular verbs "vouloir,""pouvoir," and "venir,"…

  20. Le Francais Moderne: Part I, French.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    Instructional objectives of the Dade County Public Schools Quinmester Program in French for use with "Le Francais Moderne: Part 1" focus on the development of vocabulary and mastery of grammatical structures. The formation of the passe compose with "avoir," object pronouns, the present tense of regular "-ir" verbs, and the irregular verbs…

  1. Enrollment Management & the Enrollment Industry: Part 1

    ERIC Educational Resources Information Center

    Hossler, Don

    2009-01-01

    In this article, the author begins to examine the connections between institutional enrollment management efforts and the various external for-profit, and not-for-profit, businesses that have become part of the enrollment management industry. This essay is an effort to map the relationships between institutions, the enrollment industry, and more…

  2. Cryogenic Quenching Process for Electronic Part Screening

    NASA Technical Reports Server (NTRS)

    Sheldon, Douglas J.; Cressler, John

    2011-01-01

    The use of electronic parts at cryogenic temperatures (less than 100 C) for extreme environments is not well controlled or developed from a product quality and reliability point of view. This is in contrast to the very rigorous and well-documented procedures to qualify electronic parts for mission use in the 55 to 125 C temperature range. A similarly rigorous methodology for screening and evaluating electronic parts needs to be developed so that mission planners can expect the same level of high reliability performance for parts operated at cryogenic temperatures. A formal methodology for screening and qualifying electronic parts at cryogenic temperatures has been proposed. The methodology focuses on the base physics of failure of the devices at cryogenic temperatures. All electronic part reliability is based on the bathtub curve, high amounts of initial failures (infant mortals), a long period of normal use (random failures), and then an increasing number of failures (end of life). Unique to this is the development of custom screening procedures to eliminate early failures at cold temperatures. The ability to screen out defects will specifically impact reliability at cold temperatures. Cryogenic reliability is limited by electron trap creation in the oxide and defect sites at conductor interfaces. Non-uniform conduction processes due to process marginalities will be magnified at cryogenic temperatures. Carrier mobilities change by orders of magnitude at cryogenic temperatures, significantly enhancing the effects of electric field. Marginal contacts, impurities in oxides, and defects in conductor/conductor interfaces can all be magnified at low temperatures. The novelty is the use of an ultra-low temperature, short-duration quenching process for defect screening. The quenching process is designed to identify those defects that will precisely (and negatively) affect long-term, cryogenic part operation. This quenching process occurs at a temperature that is at least

  3. Computed tomography on small explosive parts

    SciTech Connect

    Ryon, R.W.

    1994-05-01

    We have investigated three small explosive parts for the Pantex Plant in Amarillo, Texas using computed tomography (CT). A medium resolution, fan beam system was used to test imaging capabilities for small holes drilled into one of the parts, and to identify any inhomogeneities, cracks, voids, and inclusions if present in the other two parts. This system provides volumetric imaging. Its information is qualitative in that is allows us to see interior features but it cannot provide quantitative attenuation data. A second part of the investigation was to perform effective atomic number computed tomography on the parts using energy dispersive spectroscopy methods. We wanted to experimentally identify the {open_quotes}average{close_quotes} chemical composition of the materials in the explosive and its shell and to detect any possible inhomogeneities in composition. A single beam, nuclear spectroscopy based system was used for this work. The radiation source was a silver anode x-ray tube. By measuring x-ray attenuation at specific energies (characteristic lines and narrow bands of continuum) we are able to quantitatively determine linear attenuation coefficients. By using ratios of such measurements, density cancels out and we effectively have ratios of mass attenuation coefficients. Through a look-up scheme of mass attenuation coefficients for different elements, we can determine the weighted average chemical composition, as averaged by x-ray attenuation. We call this averaged composition the effective atomic number ({open_quotes}Z{sub eff}{close_quotes}). We thereby obtain cross sectional images of a parameter related to the averaged chemistry of the object. Such images and the underlying data can reveal, for instance, segregation of explosive and binder.

  4. Did Medicare Part D Reduce Disparities?

    PubMed Central

    Zissimopoulos, Julie; Joyce, Geoffrey F.; Scarpati, Lauren M.; Goldman, Dana P.

    2015-01-01

    Objective We assessed whether Medicare Part D reduced disparities in access to medication. Study Design Secondary data analysis of a twenty percent sample of Medicare beneficiaries, using Parts A and B medical claims from 2002–2008 and Part D drug claims from 2006–2008. Methods We analyzed medication use of Hispanics, blacks and whites beneficiaries with diabetes before and after reaching the Part D coverage gap, and compared it to race-specific reference groups not exposed to the loss in coverage. Unadjusted difference-indifference results were validated with multivariate regression models adjusted for demographics, comorbidities, and ZIP code-level household income used as a proxy for socioeconomic status. Results The rate at which Hispanics reduced use of diabetes-related medications in the coverage gap was twice as high as whites, while blacks decreased use of diabetes-related medications by thirty-three percent more than whites. The reduction in medication use was correlated with drug price. Hispanics and blacks were more likely than whites to discontinue a therapy after reaching the coverage gap but more likely to resume once coverage restarted. Hispanics without subsidies and living in low income areas reduced medication use more than similar blacks and whites in the coverage gap. Conclusions We find that the Part D coverage gap is particularly disruptive to minorities and those living in low-income areas. The implications of this work suggest that protecting the health of vulnerable groups requires more than premium subsidies. Patient education may be a first step, but more substantive improvements in adherence may require changes in health care delivery. PMID:25880361

  5. 33 CFR Appendix A to Part 385 - Illustrations to Part 385

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Illustrations to Part 385 A Appendix A to Part 385 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE PROGRAMMATIC REGULATIONS FOR THE COMPREHENSIVE EVERGLADES RESTORATION PLAN Pt. 385,...

  6. 2 CFR Appendix C to Part 230 - Non-Profit Organizations Not Subject to This Part

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Appendix C to Part 230—Non-Profit Organizations Not Subject to This Part 1. Advance Technology Institute..., Michigan 11. Georgia Institute of Technology/Georgia Tech Applied Research Corporation/Georgia Tech.... IIT Research Institute, Chicago, Illinois 14. Institute of Gas Technology, Chicago, Illinois...

  7. 49 CFR Appendix A to Part 210 - Summary of Noise Standards, 40 CFR Part 201

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Summary of Noise Standards, 40 CFR Part 201 A Appendix A to Part 210 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD NOISE EMISSION COMPLIANCE REGULATIONS...

  8. 49 CFR Appendix A to Part 210 - Summary of Noise Standards, 40 CFR Part 201

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Summary of Noise Standards, 40 CFR Part 201 A Appendix A to Part 210 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD NOISE EMISSION COMPLIANCE REGULATIONS...

  9. 49 CFR Appendix A to Part 210 - Summary of Noise Standards, 40 CFR Part 201

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Summary of Noise Standards, 40 CFR Part 201 A Appendix A to Part 210 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD NOISE EMISSION COMPLIANCE REGULATIONS...

  10. 49 CFR Appendix A to Part 210 - Summary of Noise Standards, 40 CFR Part 201

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Summary of Noise Standards, 40 CFR Part 201 A Appendix A to Part 210 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD NOISE EMISSION COMPLIANCE REGULATIONS...

  11. 49 CFR Appendix A to Part 210 - Summary of Noise Standards, 40 CFR Part 201

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Summary of Noise Standards, 40 CFR Part 201 A Appendix A to Part 210 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD NOISE EMISSION COMPLIANCE REGULATIONS...

  12. 32 CFR Appendix A to Part 195 - Programs to Which This Part Applies

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 2 2014-07-01 2014-07-01 false Programs to Which This Part Applies A Appendix A to Part 195 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS NONDISCRIMINATION IN FEDERALLY ASSISTED PROGRAMS OF THE DEPARTMENT OF DEFENSE-EFFECTUATION OF TITLE VI OF THE CIVIL...

  13. Operational Control Procedures for the Activated Sludge Process, Part I - Observations, Part II - Control Tests.

    ERIC Educational Resources Information Center

    West, Alfred W.

    This is the first in a series of documents developed by the National Training and Operational Technology Center describing operational control procedures for the activated sludge process used in wastewater treatment. Part I of this document deals with physical observations which should be performed during each routine control test. Part II…

  14. Site overview. Part 3 of 3part panorama with nos. CA27071 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Site overview. Part 3 of 3-part panorama with nos. CA2707-1 and CA-2707-2. Hangar no. 1. Seen from roadway leading to hangar no. 1 landing pad. Looking 250 WSW. - Marine Corps Air Station Tustin, Northern Lighter Than Air Ship Hangar, Meffett Avenue & Maxfield Street, Tustin, Orange County, CA

  15. Site overview. Part 2 of 3part panorama with nos. CA27021 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Site overview. Part 2 of 3-part panorama with nos. CA-2702-1 and CA-2707-3. Hanger no. 2 at left rear. Hangar no. 1 at right rear. Hangar no. 1 landing pad road in center. Looking 232 SW. - Marine Corps Air Station Tustin, Northern Lighter Than Air Ship Hangar, Meffett Avenue & Maxfield Street, Tustin, Orange County, CA

  16. 24 CFR Appendix Ms-1 to Part 3500 - Appendix MS-1 to Part 3500

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Appendix MS-1 to Part 3500 MS Appendix MS-1 to Part 3500 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT REAL ESTATE SETTLEMENT PROCEDURES ACT Pt. 3500, App. MS-1 Appendix MS-1...

  17. 24 CFR Appendix Ms-1 to Part 3500 - Appendix MS-1 to Part 3500

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Appendix MS-1 to Part 3500 MS Appendix MS-1 to Part 3500 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT REAL ESTATE SETTLEMENT PROCEDURES ACT Pt. 3500, App. MS-1 Appendix MS-1...

  18. 24 CFR Appendix Ms-1 to Part 3500 - Appendix MS-1 to Part 3500

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Appendix MS-1 to Part 3500 MS Appendix MS-1 to Part 3500 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT REAL ESTATE SETTLEMENT PROCEDURES ACT Pt. 3500, App. MS-1 Appendix MS-1...

  19. 12 CFR Appendix Ms-3 to Part 1024 - Appendix MS-3 to Part 1024

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 8 2014-01-01 2014-01-01 false Appendix MS-3 to Part 1024 MS Appendix MS-3 to... ACT (REGULATION X) Pt. 1024, App. MS-3 Appendix MS-3 to Part 1024 Model Force-Placed Insurance Notice Forms Table of Contents MS-3(A)—Model Form for Force-Placed Insurance Notice Containing...

  20. 44 CFR Appendix A(4) to Part 61 - Appendix A(4) to Part 61

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Appendix A(4) to Part 61 A(4) Appendix A(4) to Part 61 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY INSURANCE AND HAZARD MITIGATION National Flood Insurance Program INSURANCE COVERAGE AND RATES Pt. 61, App....

  1. 44 CFR Appendix A(5) to Part 61 - Appendix A(5) to Part 61

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Appendix A(5) to Part 61 A(5) Appendix A(5) to Part 61 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY INSURANCE AND HAZARD MITIGATION National Flood Insurance Program INSURANCE COVERAGE AND RATES Pt. 61, App....

  2. 32 CFR Appendix A to Part 195 - Programs to Which This Part Applies

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false Programs to Which This Part Applies A Appendix A to Part 195 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS NONDISCRIMINATION IN FEDERALLY ASSISTED PROGRAMS OF THE DEPARTMENT OF DEFENSE-EFFECTUATION OF TITLE VI OF THE CIVIL...

  3. 44 CFR Appendix A(6) to Part 61 - Appendix A(6) to Part 61

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Appendix A(6) to Part 61 A(6) Appendix A(6) to Part 61 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY INSURANCE AND HAZARD MITIGATION National Flood Insurance Program INSURANCE COVERAGE AND RATES Pt. 61, App....

  4. Religious Uses of the College Union: Whose Temple Is It? Part One and Part Two.

    ERIC Educational Resources Information Center

    Johnson, David E.; Nelson, Stephen J.

    1984-01-01

    The relationship of college unions and student personnel services to religious groups on campus is examined in this two part article. In part one, attention is focused on the purposes of the college union, important concepts in the nation's religious history, and actions of the courts. It is noted that legal actions and court cases have focused on…

  5. 24 CFR Appendix Ms-2 to Part 3500 - Appendix MS-2 to Part 3500

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Appendix MS-2 to Part 3500 MS Appendix MS-2 to Part 3500 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT REAL ESTATE SETTLEMENT PROCEDURES ACT Pt. 3500, App. MS-2 Appendix MS-2...

  6. 24 CFR Appendix Ms-2 to Part 3500 - Appendix MS-2 to Part 3500

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Appendix MS-2 to Part 3500 MS Appendix MS-2 to Part 3500 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT REAL ESTATE SETTLEMENT PROCEDURES ACT Pt. 3500, App. MS-2 Appendix MS-2...

  7. 24 CFR Appendix Ms-2 to Part 3500 - Appendix MS-2 to Part 3500

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Appendix MS-2 to Part 3500 MS Appendix MS-2 to Part 3500 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT REAL ESTATE SETTLEMENT PROCEDURES ACT Pt. 3500, App. MS-2 Appendix MS-2...

  8. 14 CFR 91.1007 - Flights conducted under part 121 or part 135 of this chapter.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 135 of this chapter. 91.1007 Section 91.1007 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... chapter. (a) Except as provided in § 91.501(b), when a nonprogram aircraft is used to substitute for a program flight, the flight must be operated in compliance with part 121 or part 135 of this chapter,...

  9. 47 CFR 27.1133 - Protection of Part 74 and Part 78 operations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 2 2012-10-01 2012-10-01 false Protection of Part 74 and Part 78 operations. 27.1133 Section 27.1133 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES 1710-1755 MHz, 2110-2155 MHz,...

  10. 47 CFR 27.1133 - Protection of Part 74 and Part 78 operations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Protection of Part 74 and Part 78 operations. 27.1133 Section 27.1133 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES 1710-1755 MHz, 2110-2155 MHz,...

  11. 47 CFR 27.1133 - Protection of Part 74 and Part 78 operations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false Protection of Part 74 and Part 78 operations. 27.1133 Section 27.1133 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES 1710-1755 MHz, 2110-2155 MHz,...

  12. 14 CFR Appendix A to Part 1250 - NASA Federal Financial Assistance to Which This Part Applies

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true NASA Federal Financial Assistance to Which This Part Applies A Appendix A to Part 1250 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NONDISCRIMINATION IN FEDERALLY-ASSISTED PROGRAMS OF NASA-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Pt. 1250, App. A...

  13. 33 CFR Appendix A to Part 385 - Illustrations to Part 385

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Illustrations to Part 385 A Appendix A to Part 385 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE PROGRAMMATIC REGULATIONS FOR THE COMPREHENSIVE EVERGLADES RESTORATION PLAN Pt. 385,...

  14. 33 CFR Appendix A to Part 385 - Illustrations to Part 385

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Illustrations to Part 385 A Appendix A to Part 385 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE PROGRAMMATIC REGULATIONS FOR THE COMPREHENSIVE EVERGLADES RESTORATION PLAN Pt. 385,...

  15. 5. PART 2 OF 3 PART PANORAMA WITH NOS. CA265J4 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. PART 2 OF 3 PART PANORAMA WITH NOS. CA-265-J-4 AND CA-265-J-6 OF FIGUEROA STREET AND LOS ANGELES RIVER VIADUCTS. LOOKING 308°W. - Arroyo Seco Parkway, Figueroa Street Viaduct, Spanning Los Angeles River, Los Angeles, Los Angeles County, CA

  16. 6. PART 3 OF 3 PART PANORAMA WITH NOS. CA265J4 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. PART 3 OF 3 PART PANORAMA WITH NOS. CA-265-J-4 AND CA-265-J-5 OF FIGUEROA STREET AND LOS ANGELES RIVER VIADUCTS. NOTE ARROYO SECO CHANNEL ENTERING LOS ANGELES RIVER UNDER RAILROAD TRESTLE AT RIGHT. LOOKING 268°W. - Arroyo Seco Parkway, Figueroa Street Viaduct, Spanning Los Angeles River, Los Angeles, Los Angeles County, CA

  17. 4. PART 1 OF 3 PART PANORAMA WITH NOS. CA265J5 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. PART 1 OF 3 PART PANORAMA WITH NOS. CA-265-J-5 AND CA-265-J-6 OF FIGUEROA STREET AND LOS ANGELES RIVER VIADUCTS. NOTE TUNNEL NO.1 NORTH PORTAL AT LEFT REAR. LOOKING 268°W. - Arroyo Seco Parkway, Figueroa Street Viaduct, Spanning Los Angeles River, Los Angeles, Los Angeles County, CA

  18. 50 CFR Figure 1 to Part 640 - Figure 1 to Part 640

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Figure 1 to Part 640 1 Figure 1 to Part 640 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE SPINY LOBSTER FISHERY OF THE GULF OF MEXICO AND SOUTH ATLANTIC Pt....

  19. 50 CFR Figure 1 to Part 640 - Figure 1 to Part 640

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 50 Wildlife and Fisheries 12 2012-10-01 2012-10-01 false Figure 1 to Part 640 1 Figure 1 to Part 640 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE SPINY LOBSTER FISHERY OF THE GULF OF MEXICO AND SOUTH ATLANTIC Pt....

  20. 50 CFR Figure 1 to Part 640 - Figure 1 to Part 640

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 10 2011-10-01 2011-10-01 false Figure 1 to Part 640 1 Figure 1 to Part 640 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE SPINY LOBSTER FISHERY OF THE GULF OF MEXICO AND SOUTH ATLANTIC Pt....

  1. Visual object agnosia as a problem in integrating parts and part relations.

    PubMed

    Saumier, Daniel; Arguin, Martin; Lefebvre, Christine; Lassonde, Maryse

    2002-01-01

    Current models of vision generally assume that the recognition of visual objects is achieved by encoding their component parts, as well as the spatial relations among parts. The current study examined how the processing of parts and their configurations may be affected in visual agnosia due to brain damage. Both a visual agnosic patient (AR) and healthy control subjects performed a visual search task in which they had to discriminate between targets and distractors that varied according to whether they shared their parts and/or their configuration. The results show that AR's visual search rates are disproportionally slow when targets and distractors share the same configuration than when they have different configurations. AR is also found to be disproportionately slow in discriminating targets and distractors that share identical parts when the targets and distractors share the same configuration. With differently configured targets and distractors, AR shows no part sharing effect. For controls, in contrast, the part and configuration sharing effects occur independently of one another. It is concluded that AR's object recognition deficit arises from difficulties in discriminating objects that share their configuration, and from an abnormal dependency of part information processing upon object configuration.

  2. 24 CFR Appendix A to 24 Cfr Part 3400 - Appendix A to 24 CFR Part 3400

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... individual is not taking an application; (iii) Only inputs the information into an online application or... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Appendix A to 24 CFR Part 3400 A Appendix A to 24 CFR Part 3400 Housing and Urban Development Regulations Relating to Housing and...

  3. 12 CFR Appendix 1 to Part 24 - CD-1-National Bank Community Development (Part 24) Investments

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 24) Investments 1 Appendix 1 To Part 24 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY COMMUNITY AND ECONOMIC DEVELOPMENT ENTITIES, COMMUNITY DEVELOPMENT PROJECTS, AND OTHER PUBLIC WELFARE INVESTMENTS Pt. 24, App. 1 Appendix 1 To Part 24—CD-1—National Bank Community...

  4. 12 CFR Appendix 1 to Part 24 - CD-1-National Bank Community Development (Part 24) Investments

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 24) Investments 1 Appendix 1 To Part 24 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY COMMUNITY AND ECONOMIC DEVELOPMENT ENTITIES, COMMUNITY DEVELOPMENT PROJECTS, AND OTHER PUBLIC WELFARE INVESTMENTS Pt. 24, App. 1 Appendix 1 To Part 24—CD-1—National Bank Community...

  5. National Clearinghouse on Transition from School. Newsletter Part 1 and Part 2. Vol. 2. No. 4.

    ERIC Educational Resources Information Center

    Anderson, D. S.; Blakers, C.

    1983-01-01

    This newsletter contains articles, policy statements, and reports of research concerning the transition from school to work as well as youth education issues, especially in the United Kingdom. This issue of the journal is organized into two parts. Part 1 contains reports on research projects on student retention in a forest farm community project,…

  6. 24 CFR Appendix Ms-1 to Part 3500 - Appendix MS-1 to Part 3500

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Appendix MS-1 to Part 3500 MS Appendix MS-1 to Part 3500 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT REAL ESTATE SETTLEMENT PROCEDURES ACT Pt. 3500, App. MS-1 Appendix MS-1...

  7. 24 CFR Appendix Ms-1 to Part 3500 - Appendix MS-1 to Part 3500

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Appendix MS-1 to Part 3500 MS Appendix MS-1 to Part 3500 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT REAL ESTATE SETTLEMENT PROCEDURES ACT Pt. 3500, App. MS-1 Appendix MS-1...

  8. 24 CFR Appendix Ms-2 to Part 3500 - Appendix MS-2 to Part 3500

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Appendix MS-2 to Part 3500 MS Appendix MS-2 to Part 3500 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT REAL ESTATE SETTLEMENT PROCEDURES ACT Pt. 3500, App. MS-2 Appendix MS-2...

  9. 24 CFR Appendix Ms-2 to Part 3500 - Appendix MS-2 to Part 3500

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Appendix MS-2 to Part 3500 MS Appendix MS-2 to Part 3500 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT REAL ESTATE SETTLEMENT PROCEDURES ACT Pt. 3500, App. MS-2 Appendix MS-2...

  10. 14 CFR Appendix H to Part 151 - Appendix H to Part 151

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Appendix H to Part 151 H Appendix H to Part 151 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED...) All mechanics and laborers employed or working upon the site of the work will be paid...

  11. 9. PART 1 OF 2 PART PANORAMA WITH CA265W10 OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. PART 1 OF 2 PART PANORAMA WITH CA-265-W-10 OF YORK BOULEVARD ACCESS ROAD FOR SOUTHBOUND LANES OF ARROYO SECO PARKWAY. NOTE BRIDWELL STREET AT CENTER PARALLEL TO PARKWAY. LOOKING 24°NNE. - Arroyo Seco Parkway, York Boulevard Bridge, Milepost 29.50, Los Angeles, Los Angeles County, CA

  12. 10. PART 2 OF 2 PART PANORAMA WITH CA265W9 OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. PART 2 OF 2 PART PANORAMA WITH CA-265-W-9 OF YORK BOULEVARD ACCESS ROAD FOR SOUTHBOUND LANES OF ARROYO SECO PARKWAY. NOTE SMALL ISLAND FOR EXIT AND ENTRANCE LANES. LOOKING 70°ENE. - Arroyo Seco Parkway, York Boulevard Bridge, Milepost 29.50, Los Angeles, Los Angeles County, CA

  13. Parts Quality Management: Direct Part Marking via Data Matrix Symbols for Mission Assurance

    NASA Technical Reports Server (NTRS)

    Moss, Chantrice

    2013-01-01

    A United States Government Accountability Office (GAO) review of twelve NASA programs found widespread parts quality problems contributing to significant cost overruns, schedule delays, and reduced system reliability. Direct part-marking with Data Matrix symbols could significantly improve the quality of inventory control and parts lifecycle management. This paper examines the feasibility of using 15 marking technologies for use in future NASA programs. A structural analysis is based on marked material type, operational environment (e.g., ground, suborbital, orbital), durability of marks, ease of operation, reliability, and affordability. A cost-benefits analysis considers marking technology (data plates, label printing, direct part marking) and marking types (two-dimensional machine-readable, human-readable). Previous NASA parts marking efforts and historical cost data are accounted for, including in-house vs. outsourced marking. Some marking methods are still under development. While this paper focuses on NASA programs, results may be applicable to a variety of industrial environments.

  14. Part A to part B rebilling: understanding the rules in a changing environment.

    PubMed

    Polston, Mark

    2013-06-01

    Under a recent CMS ruling, hospitals that have been denied payment for Medicare Part A services have the option to submit follow-up claims to Medicare Part B for some of these denied services. A CMS proposed rule threatens to remove that option by imposing barriers to the rebilling of claims denied under Part Afor payment under Part B. By commenting on the rule, hospitals may be able to persuade CMS to reject the proposed rule and, instead, adopt a policy similar to that in the ruling. Should CMS decide to finalize the rule, hospitals can use their comments in efforts either to convince Congress to enact statutory changes that would mandate expanded Part B rebilling or to challenge the final rule in litigation. PMID:23795379

  15. Documentary analysis in CAM research: Part 2.

    PubMed

    Dew, Kevin

    2006-03-01

    The analysis of documents can provide insights into important social and political issues related to complementary and alternative medicine (CAM). This paper identifies some important sources of documents and outlines some of the advantages and disadvantages of using documents in social research. A number of analytic strategies are illustrated with examples to demonstrate the potential for documentary analysis to answer particular CAM-related research questions. These strategies are described as quantitative content analysis, qualitative descriptive analysis, qualitative interpretive analysis and semiotic analysis. It is argued that documents are a convenient source of data and that their analysis can enrich our understanding of CAM. Part 1 covered quantitative and qualitative strategies. Part 2 focuses on semiotic analysis and the methodological strengths and weaknesses of the different strategies.

  16. Documentary analysis in CAM research: Part 1.

    PubMed

    Dew, Kevin

    2005-12-01

    The analysis of documents can provide insights into important social and political issues related to complementary and alternative medicine (CAM). This paper identifies some important sources of documents and outlines some of the advantages and disadvantages of using documents in social research. A number of analytic strategies are illustrated with examples to demonstrate the potential for documentary analysis to answer particular CAM-related research questions. These strategies are described as quantitative content analysis, qualitative descriptive analysis, qualitative interpretive analysis and semiotic analysis. It is argued that documents are a convenient source of data and that their analysis can enrich our understanding of CAM. Part 1 covers quantitative and qualitative strategies and Part 2 focuses on semiotic analysis.

  17. Multi-part mask for implanting workpieces

    DOEpatents

    Webb, Aaron P.; Carlson, Charles T.

    2016-05-10

    A multi-part mask has a pattern plate, which includes a planar portion that has the desired aperture pattern to be used during workpiece processing. The multi-part mask also has a mounting frame, which is used to hold the pattern plate. Prior to assembly, the pattern plate has an aligning portion, which has one or more holes through which reusable alignment pins are inserted. These alignment pins enter kinematic joints disposed on the mounting frame, which serve to precisely align the pattern plate to the mounting frame. After the pattern plate has been secured to the mounting frame, the aligning portion can be detached from the pattern plate. The alignment pins can be reused at a later time. In some embodiments, the pattern plate can later be removed from the mounting frame, so that the mounting frame may be reused.

  18. Physicists, Mathematicians and Astronomers- communists (Part 2)

    NASA Astrophysics Data System (ADS)

    Gaina, Alex

    The second part is continuig the edition of communists (physicists, mathematicians, astronomers), which were not included in the reference books by Yu.A. Hramov, A. N. Bogoliubov, I.G. Kolchinskii et al.. The author is discussing here also the relation between business and Communist party, especially in the Post Soviet Russia. A discussion of the biographies of Soviet scientists included in the Britannica is given, as well as a list of Russian scientists included in the Oxford Dictionary of Physics is given. Another part of the paper is pointing out the defficiencies of the last edition of the Great Russian Encyclopedic Dictionary (Drofa Eds, Moscow, 2009) in what concerns physicists, mathematicians and astronomers. A great number of Nobel Prize Winners was ommited in the edition of 2009.

  19. Relatively Inexpensive Rapid Prototyping of Small Parts

    NASA Technical Reports Server (NTRS)

    Swan, Scott A.

    2003-01-01

    Parts with complex three-dimensional shapes and with dimensions up to 8 by 8 by 10 in. (20.3 by 20.3 by 25.4 cm) can be made as unitary pieces of a room-temperature-curing polymer, with relatively little investment in time and money, by a process now in use at Johnson Space Center. The process is one of a growing number of processes and techniques that are known collectively as the art of rapid prototyping. The main advantages of this process over other rapid-prototyping processes are greater speed and lower cost: There is no need to make paper drawings and take them to a shop for fabrication, and thus no need for the attendant paperwork and organizational delays. Instead, molds for desired parts are made automatically on a machine that is guided by data from a computer-aided design (CAD) system and can reside in an engineering office.

  20. Improvement of Automotive Part Supplier Performance Evaluation

    NASA Astrophysics Data System (ADS)

    Kongmunee, Chalermkwan; Chutima, Parames

    2016-05-01

    This research investigates the problem of the part supplier performance evaluation in a major Japanese automotive plant in Thailand. Its current evaluation scheme is based on experiences and self-opinion of the evaluators. As a result, many poor performance suppliers are still considered as good suppliers and allow to supply parts to the plant without further improvement obligation. To alleviate this problem, the brainstorming session among stakeholders and evaluators are formally conducted. The result of which is the appropriate evaluation criteria and sub-criteria. The analytical hierarchy process is also used to find suitable weights for each criteria and sub-criteria. The results show that a newly developed evaluation method is significantly better than the previous one in segregating between good and poor suppliers.

  1. Temporomandibular disorders. Part 2: conservative management.

    PubMed

    Shaffer, Stephen M; Brismée, Jean-Michel; Sizer, Phillip S; Courtney, Carol A

    2014-02-01

    Appropriate management of temporomandibular disorders (TMD) requires an understanding of the underlying dysfunction associated with the temporomandibular joint (TMJ) and surrounding structures. A comprehensive examination process, as described in part 1 of this series, can reveal underlying clinical findings that assist in the delivery of comprehensive physical therapy services for patients with TMD. Part 2 of this series focuses on management strategies for TMD. Physical therapy is the preferred conservative management approach for TMD. Physical therapists are professionally well-positioned to step into the void and provide clinical services for patients with TMD. Clinicians should utilize examination findings to design rehabilitation programs that focus on addressing patient-specific impairments. Potentially appropriate plan of care components include joint and soft tissue mobilization, trigger point dry needling, friction massage, therapeutic exercise, patient education, modalities, and outside referral. Management options should address both symptom reduction and oral function. Satisfactory results can often be achieved when management focuses on patient-specific clinical variables.

  2. Vitamin D in cutaneous carcinogenesis: Part I

    PubMed Central

    Tang, Jean Y.; Fu, Teresa; Lau, Christopher; Oh, Dennis H.; Bikle, Daniel D.; Asgari, Maryam M.

    2013-01-01

    Skin cancer is the most common cancer in the United States. Exposure to ultraviolet radiation is a known risk factor for skin cancer but is also the principal means by which the body obtains vitamin D. Several studies have suggested that vitamin D plays a protective role in a variety of internal malignancies. With regard to skin cancer, epidemiologic and laboratory studies suggest that vitamin D and its metabolites may have a similar protective effect. These noncalcemic actions of vitamin D have called into question whether the current recommended intake of vitamin D is too low for optimal health and cancer prevention. Part I will review the role of vitamin D in the epidermis; part II will review the role of vitamin D in keratinocyte-derived tumors to help frame the discussion on the possible role of vitamin D in the prevention of skin cancer. PMID:23062903

  3. [Comparative quality measurements part 1: run charts].

    PubMed

    Kottner, Jan

    2012-06-01

    Quality assessment may be based on data of quality indicators. There are two main approaches for comparative quality measurements: comparison of data of the same service at different points over time or comparison of data of different services at the same time. Risk adjustment and standardisation must be performed and random variation must be adequately taken into account. In Statistical Process Control (SPC) theory common cause and special cause variation are distinguished. Processes in statistical control are stable and predictable. If processes exhibit special cause variation the management should investigate the reasons for this and manage the causes. Run charts as simple tools to display and analyse data of processes and outcomes over time are discussed in this article. They can be used for self-comparison. The following two parts of this three-part series explain control charts and funnel plots. PMID:22661066

  4. [Dismemberment with unusual preservation of cadaver parts].

    PubMed

    Madea, B

    1994-01-01

    Report on a case of criminal dismembering of a corpse and the effect of vinyl on postmortem changes. Two years after murder a dismembered body, the body parts wrapped into plastic bags, were found buried 30-50 cm deep into loose earth. The whole body as well as the inner organs were very well preserved. Obviously the air-proof conditions in the plastic bag were a supporting factor for the good preservation. PMID:8198432

  5. Renewable energy sources 1991, part 3

    NASA Astrophysics Data System (ADS)

    Michalicka, L.

    1991-12-01

    The Fourth International Conference on Renewable Energy Sources was held at Prague Technical University from 1-4 Jul. 1991. Part 3 of the proceedings contains a report on the conference and 10 contributions, of which 2 were inputted in INIS: one deals with the economic problems of wind-, solar- and oil-driven water pumps, the other deals with the decrease in sunshine brought about by the operation of Czechoslovak nuclear power plants.

  6. Obesity in pregnancy. Part 2: management.

    PubMed

    Phillips, Frankie

    2013-01-01

    Obesity is placing a huge burden on healthcare resources and the wellbeing of individuals. The first article in this two part series (October 2012) reviewed the prevalence of obesity in pregnancy and the increased risks for pregnant women to their own and their babies' health. Management of obesity during pregnancy also places a large burden on midwifery resources. A renewed focus is needed on achieving a healthy weight for pregnancy to ensure optimal outcomes and reduce risks.

  7. Surgical history of ancient China: Part 2.

    PubMed

    Fu, Louis

    2010-03-01

    In this second part of ancient Chinese surgical history, the practice of bone setting in China began around 3000 years ago. Throughout this period, significant progress was made, some highlights of which are cited. These methods, comparable with Western orthopaedic technique, are still being practised today. In conclusion, the possible reasons for the lack of advancement in operative surgery are discussed, within context of the cultural, social and religious background of ancient China.

  8. DICOM: key concepts--part I.

    PubMed

    Kabachinski, Jeff

    2005-01-01

    In this issue and next, we're investigating different sections of the DICOM Standard to get a grip on what it's all about. The bottom line is to facilitate communication and DICOM addresses all the technical aspects to allow complying OEMs to talk to one another. In part 2, IT World completes its overview on DICOM by exploring UID, networking with DICOM, conformance, and conformance statements.

  9. Marking parts to aid robot vision

    NASA Technical Reports Server (NTRS)

    Bales, J. W.; Barker, L. K.

    1981-01-01

    The premarking of parts for subsequent identification by a robot vision system appears to be beneficial as an aid in the automation of certain tasks such as construction in space. A simple, color coded marking system is presented which allows a computer vision system to locate an object, calculate its orientation, and determine its identity. Such a system has the potential to operate accurately, and because the computer shape analysis problem has been simplified, it has the ability to operate in real time.

  10. Prediction of periventricular leukomalacia. Part II

    PubMed Central

    Samanta, Biswanath; Bird, Geoffrey L.; Kuijpers, Marijn; Zimmerman, Robert A.; Jarvik, Gail P.; Wernovsky, Gil; Clancy, Robert R.; Licht, Daniel J.; Gaynor, J. William; Nataraj, Chandrasekhar

    2009-01-01

    Summary Objective The objective of Part II is to analyze the dataset of extracted hemodynamic features (Case 3 of Part I) through computational intelligence (CI) techniques for identification of potential prognostic factors for periventricular leukomalacia (PVL) occurrence in neonates with congenital heart disease. Methods The extracted features (Case 3 dataset of Part I) were used as inputs to CI based classifiers, namely, multi-layer perceptron (MLP) and probabilistic neural network (PNN) in combination with genetic algorithms (GA) for selection of the most suitable features predicting the occurrence of PVL. The selected features were next used as inputs to a decision tree (DT) algorithm for generating easily interpretable rules of PVL prediction. Results Prediction performance for two CI based classifiers, MLP and PNN coupled with GA are presented for different number of selected features. The best prediction performances were achieved with 6 and 7 selected features. The prediction success was 100% in training and the best ranges of sensitivity (SN), specificity (SP) and accuracy (AC) in test were 60-73%, 74-84% and 71-74%, respectively. The identified features when used with the DTalgorithm gave best SN, SP and AC in the ranges of 87-90% in training and 80-87%, 74-79% and 79-82% in test. Among the variables selected in CI, systolic and diastolic blood pressures, and pCO2 figured prominently similar to Part I. Decision tree based rules for prediction of PVL occurrence were obtained using the CI selected features. Conclusions The proposed approach combines the generalization capability of CI based feature selection approach and generation of easily interpretable classification rules of the decision tree. The combination of CI techniques with DT gave substantially better test prediction performance than using CI and DT separately. PMID:19162456

  11. Wound healing: part II. Clinical applications.

    PubMed

    Janis, Jeffrey; Harrison, Bridget

    2014-03-01

    Treatment of all wounds requires adequate wound bed preparation, beginning with irrigation and débridement. Complicated or chronic wounds may also require treatment adjuncts or specialized wound healing products. An extensive body of research and development has introduced novel wound healing therapies and scar management options. In this second of a two-part continuing medical education series on wound healing, the reader is offered an update on current wound healing technologies and recommendations for obtaining optimal outcomes.

  12. 49 CFR Appendix A-Ii to Part 541 - Lines With Antitheft Devices Which Are Exempted In-Part From the Parts-Marking Requirements of...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 6 2012-10-01 2012-10-01 false Lines With Antitheft Devices Which Are Exempted In-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 A Appendix A-II to Part 541 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT...

  13. Part-Time Faculty Satisfaction at Two-Year Public Postsecondary Institutions: A Comparison of Involuntary Part-Time, Voluntary Part-Time, and Full-Time Faculty

    ERIC Educational Resources Information Center

    Kinchen, Nancy Huval

    2010-01-01

    Part-time faculty members represent the majority of faculty at public two-year postsecondary institutions. Utilizing part-time faculty enables two-year institutions to control their instructional costs and maintain scheduling flexibility. However, part-time faculty are diverse in regards to their employment preference, some prefer part-time…

  14. Continuum Thermodynamics - Part II: Applications and Examples

    NASA Astrophysics Data System (ADS)

    Albers, Bettina; Wilmanski, Krzysztof

    The intention by writing Part II of the book on continuum thermodynamics was the deepening of some issues covered in Part I as well as a development of certain skills in dealing with practical problems of oscopic processes. However, the main motivation for this part is the presentation of main facets of thermodynamics which appear when interdisciplinary problems are considered. There are many monographs on the subjects of solid mechanics and thermomechanics, on fluid mechanics and on coupled fields but most of them cover only special problems in great details which are characteristic for the chosen field. It is rather seldom that relations between these fields are discussed. This concerns, for instance, large deformations of the skeleton of porous materials with diffusion (e.g. lungs), couplings of deformable particles with the fluid motion in suspensions, couplings of adsorption processes and chemical reactions in immiscible mixtures with diffusion, various multi-component aspects of the motion, e.g. of avalanches, such as segregation processes, etc...

  15. River as a part of ground battlefield

    NASA Astrophysics Data System (ADS)

    Vračar, Miodrag S.; Pokrajac, Ivan; Okiljević, Predrag

    2013-05-01

    The rivers are in some circumstances part of the ground battlefield. Microseisms induced at the riverbed or ground at the river surrounding might be consequence of military activities (military ground transports, explosions, troop's activities, etc). Vibrations of those fluid-solid structures are modeled in terms of solid displacement and change of fluid pressure. This time varying fluid pressure in river, which originates from ground microseisms, is possible to detect with hydrophones. Therefore, hydroacoustic measurements in rivers enables detecting, identification and localization various types of military noisy activities at the ground as and those, which origin is in the river water (hydrodynamics of water flow, wind, waves, river vessels, etc). In this paper are presented river ambient noise measurements of the three great rivers: the Danube, the Sava and the Tisa, which flows in north part of Serbia in purpose to establish limits in detection of the ground vibrations in relatively wide frequency range from zero to 20 kHz. To confirm statement that the river is a part of ground battlefield, and that hydroacoustic noise is possible to use in detecting and analyzing ground microseisms induced by civil or military activities, some previous collected data of hydroacoustic noise measurement in the rivers are used. The data of the river ambient noise include noise induced by civil engineering activities, that ordinary take place in large cities, noise that produced ships and ambient noise of the river when human activities are significantly reduced. The poly spectral method was used in analysis such events.

  16. Catalog of infrared observations. Part 1: Data

    NASA Technical Reports Server (NTRS)

    Gezari, Daniel Y.; Schmitz, Marion; Mead, Jaylee M.

    1987-01-01

    The Catalog of Infrared Observations (CIO) is a compilation of infrared astronomical observational data obtained from an extensive literature search of astronomical journals and major astronomical catalogs and surveys. The literature searches are complete for 1965 through 1986 in this Second Edition. The Catalog is published in two parts, with the observational data (roughly 200,000 observations of 20,000 individual sources) listed in Part I, and supporting appendices in Part II. The expanded Second Edition contains a new feature: complete IRAS 4-band data for all CIO sources detected, listed with the main Catalog observations, as well as in complete detail in the Appendix. The appendices include an atlas of infrared source positions, two bibliographies of infrared literature upon which the search was based, and, keyed to the main Catalog listings (organized alphabetically by author and then chronologically), an atlas of infrared spectral ranges, and IRAS data from the CIO sources. The complete CIO database is available to qualified users in printed microfiche and magnetic tape formats.

  17. Manufacturing of GLARE Parts and Structures

    NASA Astrophysics Data System (ADS)

    Sinke, J.

    2003-07-01

    GLARE is a hybrid material consisting of alternating layers of metal sheets and composite layers, requiring special attention when manufacturing of parts and structures is concerned. On one hand the applicable manufacturing processes for GLARE are limited, on the other hand, due to the constituents and composition of the laminate, it offers new opportunities for production. One of the opportunities is the manufacture of very large skin panels by lay-up techniques. Lay-up techniques are common for full composites, but uncommon for metallic structures. Nevertheless, large GLARE skin panels are made by lay-up processes. In addition, the sequences of forming and laminating processes, that can be selected, offer manufacturing options that are not applicable to metals or full composites. With respect to conventional manufacturing processes, the possibilities for Fibre Metal Laminates in general, are limited. The limits are partly due to the different failure modes, partly due to the properties of the constituents in the laminate. For machining processes: the wear of the cutting tools during machining operations of GLARE stems from the abrasive nature of the glass fibres. For the forming processes: the limited formability, expressed by a small failure strain, is related to the glass fibres. However, although these manufacturing issues may restrict the use of manufacturing processes for FMLs, application of these laminates in aircraft is not hindered.

  18. Catalog of infrared observations. Part 1: Data

    NASA Astrophysics Data System (ADS)

    Gezari, Daniel Y.; Schmitz, Marion; Mead, Jaylee M.

    The Catalog of Infrared Observations (CIO) is a compilation of infrared astronomical observational data obtained from an extensive literature search of astronomical journals and major astronomical catalogs and surveys. The literature searches are complete for 1965 through 1986 in this Second Edition. The Catalog is published in two parts, with the observational data (roughly 200,000 observations of 20,000 individual sources) listed in Part I, and supporting appendices in Part II. The expanded Second Edition contains a new feature: complete IRAS 4-band data for all CIO sources detected, listed with the main Catalog observations, as well as in complete detail in the Appendix. The appendices include an atlas of infrared source positions, two bibliographies of infrared literature upon which the search was based, and, keyed to the main Catalog listings (organized alphabetically by author and then chronologically), an atlas of infrared spectral ranges, and IRAS data from the CIO sources. The complete CIO database is available to qualified users in printed microfiche and magnetic tape formats.

  19. 12 CFR Appendix A to Part 233 - Model Notice

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Federal Regulations (12 CFR part 233) and part 132 of title 31 of the U.S. Code of Federal Regulations (31 CFR part 132). ... FUNDING OF UNLAWFUL INTERNET GAMBLING (REGULATION GG) Part 233, App. A Appendix A to Part 233—Model...

  20. 31 CFR Appendix A to Part 132 - Model Notice

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... one another can be found at part 233 of title 12 of the U.S. Code of Federal Regulations (12 CFR part 233) and part 132 of title 31 of the U.S. Code of Federal Regulations (31 CFR part 132). ... INTERNET GAMBLING Pt. 132, App. A Appendix A to Part 132—Model Notice Re: U.S. Unlawful Internet...

  1. 12 CFR Appendix A to Part 233 - Model Notice

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Federal Regulations (12 CFR part 233) and part 132 of title 31 of the U.S. Code of Federal Regulations (31 CFR part 132). ... FUNDING OF UNLAWFUL INTERNET GAMBLING (REGULATION GG) Part 233, App. A Appendix A to Part 233—Model...

  2. 17 CFR Schedule A to Part 286 - Schedule A to Part 286

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...) Schedule A to Part 285 GENERAL RULES AND REGULATIONS PURSUANT TO SECTION 11(a) OF THE INTER-AMERICAN... sales literature to be provided by the Bank or any of the principal underwriters for general use...

  3. 48 CFR Appendix A to Part 1219 - Appendix A to Part 1219

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... PROGRAMS SMALL BUSINESS PROGRAMS Pt. 1219, App. A Appendix A to Part 1219 Targeted industry categories...) R414 (3) Radio/TV Communication Equipment (except airborne) 5820 (4) Maintenance, Repair,...

  4. 6 CFR Appendix A to Part 21 - Activities to Which This Part Applies

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...—Activities to Which This Part Applies Note: Failure to list a type of Federal assistance in appendix A shall... Fund. 8. U.S. Coast Guard Bridge Alteration. 9. Use of Customs personnel and facilities by any...

  5. JPEG-2000 Part 10 Verification Model

    2003-03-04

    VM10 is a research software implementation of the ISO/IEC JPEG-2000 Still Image Coding standard (ISO international Standard 15444). JPEG-2000 image coding involves subband codiing and compression of digital raster images to facilitate storage and transmission of such imagery. Images are decomposed into space/scale subbands using cascades of two-dimensional (tensor product) discrete wavelet transforms. The wavelet transforms can be either reversible (integer-to-integer) transforms or irreversible (integer-to-float). The subbands in each resolution level are quantized by uniformmore » scalar quantization in the irreversible case. The resulting integer subbands in each resolution level are partitioned into spatially localized code blocks to facilitate localized entropy decoding. Code blocks are encoded and packaged into an embedded bitstream using binary arithmetic bitplane coding (the MQ Coder algorithm applied to hierarchical bitplane coding (the MQ coder algorithm applied to hierachical bitplane context modeling). The resultant compressed bitstream is configured for use with the JPIP interactive client-server protocol (JPEG-2000 part 9). VM10 is written in ANSI C++ using the Biltz++ array class library. To enable development of multidimensional image coding algorithms, VM10 is templated on the dimension of the array containers. It was developed with the GNU g++ compiler on both Linux (Red Hat) and Windows/cygwin platforms, although it should compile and run under other ANSI C++ compilers as well. Software design is highly modular and object-oriented in order to facilitate rapid development and frequent revision and experimentation. No attempt has been made to optimize the run-time performance of the code. The software performs both the encoding and decoding operations involved in JPEG-2000 image coding, as implemented in apps/compress/main.cpp and apps/expand/main.cpp. VM10 implements all of the JPEG-2000 baseline (Part 1, ISO 15444-1) and portions of the

  6. 20 CFR 718.2 - Applicability of this part.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... version of Part 718 set forth in 20 CFR, parts 500 to end, edition revised as of April 1, 2010, applies to... OR DEATH DUE TO PNEUMOCONIOSIS General § 718.2 Applicability of this part. (a) With the exception...

  7. 12 CFR Supplement I to Part 1026 - Official Interpretations

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... not exempt any person from any other requirement of this part, Regulation X (12 CFR part 1024), the..., oral, or print media, are covered by Regulation Z (12 CFR part 1026). i. Examples include: A....

  8. 40 CFR 1045.10 - How is this part organized?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... references to other parts of the Code of Federal Regulations). (g) Subpart G of this part and 40 CFR part... CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Overview...

  9. 40 CFR 1045.10 - How is this part organized?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... references to other parts of the Code of Federal Regulations). (g) Subpart G of this part and 40 CFR part... CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Overview...

  10. 40 CFR 1045.10 - How is this part organized?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... references to other parts of the Code of Federal Regulations). (g) Subpart G of this part and 40 CFR part... CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Overview...

  11. 40 CFR 1045.10 - How is this part organized?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... references to other parts of the Code of Federal Regulations). (g) Subpart G of this part and 40 CFR part... CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Overview...

  12. 40 CFR 1045.10 - How is this part organized?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... references to other parts of the Code of Federal Regulations). (g) Subpart G of this part and 40 CFR part... CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Overview...

  13. 40 CFR Appendix B to Part 61 - Test Methods

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... CFR part 60. Therefore, to obtain reliable results, persons using this method should have a thorough... CFR part 60 and in this part. Therefore, to obtain reliable results, persons using this method...

  14. On the Madelung Part of Lattice Energy

    NASA Astrophysics Data System (ADS)

    Hoppe, Rudolf

    1995-06-01

    The Born-Haber Cycle (BHC) is critically reviewed, the origin of severe limitations in its appli­ cation is shown. Partly this is based on the construction of the third step, partly it is connected with the fact that most of the "classical" anions of inorganic chemistry are instable, "unobservable" gaseous entities. The Madelung Part of Lattice Energy, MAPLE*, is extentionally analyzed (e.g. TiO2) to demonstrate that the similarity of thermodynamical properties like ΔH°298 of all modifica­ tions, reflected in MAPLE, is non-trivial. The analogous analysis with e.g. BaTiO3 proves that neither the classical "central ion" (here Ti4+) nor the "completing" cation (here Ba2+) but the "anions" coordinating the last mentioned cation BaO gain energy and, in this sense, "stabilize" the complex. Even simple compounds (e.g. A-La2O3) show surprising geometrical arrangements, in striking contrast to often used but simple minded concepts like "Bond Length/Bond Strength" and its derivatives like CHARDI, whereas such "oddities" are explained by MAPLE. The application of the theorem of additivity of MAPLE (MAPLEpolynary = Σ MAPLEbinary), that passes even in the case of hydrates, and its limitations are discussed. Guided by MAPLE, surprisingly complicated structures (e.g. Cs2Li3I5) of polynary derivatives of structurally exceedingly simple binary com­ pounds become "understandable". If "molecular" entities like SO3 are involved, limitations can be excluded using "increments". Last not least, MAPLE is the first known guide to a multi-dimen-sional but strict scheme of characterisation of Solid State Structures in the sense of Linne's ideas, based on geometrical facts only.

  15. Vertical deformation at western part of Sumatra

    SciTech Connect

    Febriyani, Caroline Prijatna, Kosasih Meilano, Irwan

    2015-04-24

    This research tries to make advancement in GPS signal processing to estimate the interseismic vertical deformation field at western part of Sumatra Island. The data derived by Continuous Global Positioning System (CGPS) from Badan Informasi Geospasial (BIG) between 2010 and 2012. GPS Analyze at Massachusetts Institute of Technology (GAMIT) software and Global Kalman Filter (GLOBK) software are used to process the GPS signal to estimate the vertical velocities of the CGPS station. In order to minimize noise due to atmospheric delay, Vienna Mapping Function 1 (VMF1) is used as atmospheric parameter model and include daily IONEX file provided by the Center for Orbit Determination in Europe (CODE) as well. It improves GAMIT daily position accuracy up to 0.8 mm. In a second step of processing, the GLOBK is used in order to estimate site positions and velocities in the ITRF08 reference frame. The result shows that the uncertainties of estimated displacement velocity at all CGPS stations are smaller than 1.5 mm/yr. The subsided deformation patterns are seen at the northern and southern part of west Sumatra. The vertical deformation at northern part of west Sumatra indicates postseismic phase associated with the 2010 and 2012 Northern Sumatra earthquakes and also the long-term postseismic associated with the 2004 and 2005 Northern Sumatra earthquakes. The uplifted deformation patterns are seen from Bukit Tinggi to Seblat which indicate a long-term interseismic phase after the 2007 Bengkulu earthquake and 2010 Mentawai earthquake. GANO station shows a subsidence at rate 12.25 mm/yr, indicating the overriding Indo-Australia Plate which is dragged down by the subducting Southeast Asian Plate.

  16. Developing preceptorship through action research: Part 1.

    PubMed

    Hilli, Yvonne; Melender, Hanna-Leena

    2015-09-01

    Clinical preception in practice plays a significant role in both registered and practical nurse studies. As such, the cooperation between the faculty and working life is important to narrow the theory-practice gap, with emphasis being placed on a student-oriented approach promoting self-direction and lifelong learning. The aim of this project was to develop the preceptorship at five different units within the health-care sector in western Finland by implementing an action research (AR) approach. This article is the first of a two-part article on the project, focusing on a cultural analysis and the development of preception models conducted within the project. The five units participating in the study were the following: a long-term care ward in the community, a ward for people with dementia, a geriatric ward, a medical ward and a surgical ward representing specialised care. The starting point of the study was a cultural analysis, which was made in all the five units to obtain a 'bottom-up' perspective. In each of the five units 3-5 nurses were appointed to become members of the core groups. This meant that all the units would start from the perspective of their own working environment when creating a preception model that would fit into their particular workplace. During this process, the participants received continuous support from the researchers. Several workshops and seminars were also arranged to further support the core groups and staff. The models were implemented and tested during the academic year 2010-2011 followed by an evaluation of the project. The evaluation results will be presented in the second part of the two-part article. The project showed that reflective practice and critical thinking can be improved through an AR approach. PMID:25684330

  17. Vertical deformation at western part of Sumatra

    NASA Astrophysics Data System (ADS)

    Febriyani, Caroline; Prijatna, Kosasih; Meilano, Irwan

    2015-04-01

    This research tries to make advancement in GPS signal processing to estimate the interseismic vertical deformation field at western part of Sumatra Island. The data derived by Continuous Global Positioning System (CGPS) from Badan Informasi Geospasial (BIG) between 2010 and 2012. GPS Analyze at Massachusetts Institute of Technology (GAMIT) software and Global Kalman Filter (GLOBK) software are used to process the GPS signal to estimate the vertical velocities of the CGPS station. In order to minimize noise due to atmospheric delay, Vienna Mapping Function 1 (VMF1) is used as atmospheric parameter model and include daily IONEX file provided by the Center for Orbit Determination in Europe (CODE) as well. It improves GAMIT daily position accuracy up to 0.8 mm. In a second step of processing, the GLOBK is used in order to estimate site positions and velocities in the ITRF08 reference frame. The result shows that the uncertainties of estimated displacement velocity at all CGPS stations are smaller than 1.5 mm/yr. The subsided deformation patterns are seen at the northern and southern part of west Sumatra. The vertical deformation at northern part of west Sumatra indicates postseismic phase associated with the 2010 and 2012 Northern Sumatra earthquakes and also the long-term postseismic associated with the 2004 and 2005 Northern Sumatra earthquakes. The uplifted deformation patterns are seen from Bukit Tinggi to Seblat which indicate a long-term interseismic phase after the 2007 Bengkulu earthquake and 2010 Mentawai earthquake. GANO station shows a subsidence at rate 12.25 mm/yr, indicating the overriding Indo-Australia Plate which is dragged down by the subducting Southeast Asian Plate.

  18. 4. PART 2 OF 2 PART PANORAMA WITH NO. CA2723. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. PART 2 OF 2 PART PANORAMA WITH NO. CA-272-3. SOUTH SIDE OF VIADUCT IN REAR. LOS ANGELES RIVER IN FOREGROUND. LOOKING NORTHWEST FROM WEST SIDE OF RIVER. HYPERION BOULEVARD OVERCROSSING OF LOS ANGELES RIVER IS UPPER SECTION OF VIADUCT. GLENDALE BOULEVARD IS LOWER SECTION OF RIVER OVERCROSSING. - Glendale-Hyperion Viaduct, Spanning Golden State Freeway (I-5) & Los Angeles River at Glendale Boulevard, Los Angeles, Los Angeles County, CA

  19. PART 1 OF 2 PART PANORAMA WITH NO. CA213 VIEW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PART 1 OF 2 PART PANORAMA WITH NO. CA-2-13 VIEW OF PIEDMONT AVENUE TRAFFIC CIRCLE AT INTERSECTION OF CHANNING WAY WITH VIW AT REAR OF ALPHA SIGMA PHI HOUSE BY WILLIAM C. HAYS, 1920, AT 2739 CHANNING. SEEN FROM SE CORNER LOOKING WEST. Photograph by Brian Grogan, July 8, 2007 - Piedmont Way & the Berkeley Property Tract, East of College Avenue between Dwight Way & U.C. Memorial Stadium, Berkeley, Alameda County, CA

  20. 45 CFR Appendix A to Part 13 - Appendix A to Part 13

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION IMPLEMENTATION OF THE EQUAL...); 1395bbb(c)(1); 1396b(m)(5)(B); 1396r(b)(3)(B)(ii), (g)(2)(A)(i); 1396t(i)(3); 11131(c); 11137(b)(2) 42 CFR part 1003; 42 CFR part 1005. 2. Appeals of exclusions from Medicare and State health care programs...

  1. Radiation transport phenomena and modeling. Part A: Codes; Part B: Applications with examples

    SciTech Connect

    Lorence, L.J. Jr.; Beutler, D.E.

    1997-09-01

    This report contains the notes from the second session of the 1997 IEEE Nuclear and Space Radiation Effects Conference Short Course on Applying Computer Simulation Tools to Radiation Effects Problems. Part A discusses the physical phenomena modeled in radiation transport codes and various types of algorithmic implementations. Part B gives examples of how these codes can be used to design experiments whose results can be easily analyzed and describes how to calculate quantities of interest for electronic devices.

  2. 45 CFR Appendix A to Part 13 - Appendix A to Part 13

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...)(1), (g)(3)(B), (g)(4)(B)(ii) 42 CFR part 498; 42 CFR 1001.107. Food and Drug Administration 1. Proceedings to withdraw approval of new drug applications 21 U.S.C. 355(e) 21 CFR part 12; 21 CFR 314.200. 2...); 1395bbb(c)(1); 1396b(m)(5)(B); 1396r(b)(3)(B)(ii), (g)(2)(A)(i); 1396t(i)(3); 11131(c); 11137(b)(2) 42...

  3. 45 CFR Appendix A to Part 13 - Appendix A to Part 13

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...)(1), (g)(3)(B), (g)(4)(B)(ii) 42 CFR part 498; 42 CFR 1001.107. Food and Drug Administration 1. Proceedings to withdraw approval of new drug applications 21 U.S.C. 355(e) 21 CFR part 12; 21 CFR 314.200. 2...); 1395bbb(c)(1); 1396b(m)(5)(B); 1396r(b)(3)(B)(ii), (g)(2)(A)(i); 1396t(i)(3); 11131(c); 11137(b)(2) 42...

  4. 45 CFR Appendix A to Part 13 - Appendix A to Part 13

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...)(1), (g)(3)(B), (g)(4)(B)(ii) 42 CFR part 498; 42 CFR 1001.107. Food and Drug Administration 1. Proceedings to withdraw approval of new drug applications 21 U.S.C. 355(e) 21 CFR part 12; 21 CFR 314.200. 2...); 1395bbb(c)(1); 1396b(m)(5)(B); 1396r(b)(3)(B)(ii), (g)(2)(A)(i); 1396t(i)(3); 11131(c); 11137(b)(2) 42...

  5. Site overview. Part 1 of 3part panorama with nos. CA27022 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Site overview. Part 1 of 3-part panorama with nos. CA-2702-2 and CA-2707-3. Southern LTA ship hangar (building 28; hangar no. 2 in distant center of photograph. Seen from roadway leading to northern LTA ship hangar (building 29; hangar no. 1) landing pad. Looking 208 SSW. - Marine Corps Air Station Tustin, East of Red Hill Avenue between Edinger Avenue & Barranca Parkway, Tustin, Orange County, CA

  6. Site overview. Part 1 of 3part panorama with nos. CA27022 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Site overview. Part 1 of 3-part panorama with nos. CA-2702-2 and CA-2707-3. Southern LTA ship hangar (building 28; hangar no. 2 in distant center of photograph. Seen from roadway leading to northern LTA ship hangar (building 29; hangar no. 1) landing pad. Looking 208 SSW. - Marine Corps Air Station Tustin, Northern Lighter Than Air Ship Hangar, Meffett Avenue & Maxfield Street, Tustin, Orange County, CA

  7. CROWNWeb: the evolution of kidney data management. Part 3 of a three-part series.

    PubMed

    McDonough, Matthew J

    2008-09-01

    The Centers for Medicare & Medicaid Services is developing a Web-based application, CROWNWeb, which is designed to facilitate the mandated entry and update of electronic data, and retrieve this data for dialysis facilities nationwide. Part III of this three-part series further explores the rationale behind CROWNWeb, discusses situations from the past where CROWNWeb could have benefited the renal community, and reviews how CROWNWeb can be used in CQI activities and to track and improve patient outcomes.

  8. Rotating electric machine with fluid supported parts

    DOEpatents

    Smith, Jr., Joseph L.; Kirtley, Jr., James L.

    1981-01-01

    A rotating electric machine in which the armature winding thereof and other parts are supported by a liquid to withstand the mechanical stresses applied during transient overloads and the like. In particular, a narrow gap is provided between the armature winding and the stator which supports it and this gap is filled with an externally pressurized viscous liquid. The liquid is externally pressurized sufficiently to balance the static loads on the armature winding. Transient mechanical loads which deform the armature winding alter the gap dimensions and thereby additionally pressurize the viscous liquid to oppose the armature winding deformation and more nearly uniformly to distribute the resulting mechanical stresses.

  9. A Physicist for All Seasons: Part I

    NASA Astrophysics Data System (ADS)

    Oppenheimer, Frank

    2013-03-01

    The first part of this interview covers Frank Oppenheimer's childhood, family background, and early education in New York City; his deep lifelong bond to his older brother Robert; his undergraduate years at Johns Hopkins University (1930-1933); his stays at the Cavendish Laboratory in Cambridge, England, and at the University of Florence, Italy (1933-1935); his graduate studies at the California Institute of Technology (1935-1939); his postdoctoral assistantship at Stanford University (1939-1941); and the frequent summers he spent in New Mexico with his brother, family, and friends.

  10. NASA Electronic Parts and Packaging (NEPP) Program

    NASA Technical Reports Server (NTRS)

    LaBel, Kenneth A.; Sampson, Michael J.

    2008-01-01

    This viewgraph presentation reviews NASA's Electronic Parts and Packaging (NEPP) Program. The NEPP mission is to provide guidance to NASA for the selection and and application of microelectronics technologies, to improve understanding of the risks related to the use of these technologies in the space environment and to ensure that appropriate research is performed to meet NASA mission needs. The NEPP Program focuses on the reliability aspects of electronic devices. Three principal aspects to this reliability: (1) lifetime, (2) effects of space radiation and the space environment, and (3) creation and maintenance of the assurance support infrastructure required for success.

  11. Renewable energy sources 1991, part 2

    NASA Astrophysics Data System (ADS)

    Michalicka, L.

    1991-12-01

    The International Conference on Renewable Energy Sources was held in Prague on 1-4 Jul. 1991. Part 2 of the proceedings is devoted to the use of the energy of wind, biogas, and small hydroelectric sources. The publication contains 14 contributions, of which 3 were inputted in INIS. Topics covered include: a wind power plant in Sweden and its environmental impacts, economic aspects of the introduction of alternative energy sources in Czechoslovakia, and the efficiency of application of a Fresnel lens-based solar collector.

  12. Surface electrical properties experiment, Part 3

    NASA Technical Reports Server (NTRS)

    1974-01-01

    A complete unified discussion of the electromagnetic response of a plane stratified structure is reported. A detailed and comprehensive analysis of the theoretical parts of the electromagnetic is given. The numerical problem of computing numbers of the electromagnetic field strengths is discussed. It is shown that the analysis of the conductive media is not very far removed from the theoretical analysis and the numerical difficulties are not as accute as for the low-loss problem. For Vol. 1, see N75-15570; for Vol. 2 see N75-15571.

  13. Modification of the surface of parts

    NASA Astrophysics Data System (ADS)

    Simonova, L. A.; Chernova, M. A.; Zvezdin, V. V.

    2016-06-01

    The increasing wear resistance of parts is one of the main tasks of engineering. The achievement of stable parameters is a difficult task. It depends on capabilities of equipment, type of evaporator, interaction evaporator with the evaporating substance and deposition process.The control system must foresee and identify emerging cracks or damage of the system components. At every stage software of control process system must automatically make the optimal decisions based on information about the process. It also improves the efficiency of the operator. This article focuses on the results of using intelligent control system technological process.

  14. Treatment of superficial mycoses: review - part II*

    PubMed Central

    Dias, Maria Fernanda Reis Gavazzoni; Bernardes-Filho, Fred; Quaresma-Santos, Maria Victória Pinto; Amorim, Adriana Gutstein da Fonseca; Schechtman, Regina Casz; Azulay, David Rubem

    2013-01-01

    Superficial fungal infections of the hair, skin and nails are a major cause of morbidity in the world. Choosing the right treatment is not always simple because of the possibility of drug interactions and side effects. The first part of the article discusses the main treatments for superficial mycoses - keratophytoses, dermatophytosis, candidiasis, with a practical approach to the most commonly-used topical and systemic drugs , referring also to their dosage and duration of use. Promising new, antifungal therapeutic alternatives are also highlighted, as well as available options on the Brazilian and world markets. PMID:24474103

  15. Summation by parts, projections, and stability

    NASA Technical Reports Server (NTRS)

    Olsson, Pelle

    1993-01-01

    We have derived stability results for high-order finite difference approximations of mixed hyperbolic-parabolic initial-boundary value problems (IBVP). The results are obtained using summation by parts and a new way of representing general linear boundary conditions as an orthogonal projection. By slightly rearranging the analytic equations, we can prove strict stability for hyperbolic-parabolic IBVP. Furthermore, we generalize our technique so as to yield strict stability on curvilinear non-smooth domains in two space dimensions. Finally, we show how to incorporate inhomogeneous boundary data while retaining strict stability. Using the same procedure one can prove strict stability in higher dimensions as well.

  16. Surgical history of ancient China: part 1.

    PubMed

    Fu, Louis

    2009-12-01

    Although surgery was an accepted and quite proficient craft very early on in Chinese history, it has deteriorated through the ages. Despite the fact that anaesthetic agents in major surgery were employed during the third century, Chinese surgery is conspicuous by its stagnation. Reverence for the dead, filial piety, abhorrence of shedding blood and other conservative attitudes make it impossible for any accurate knowledge of the human anatomy and physiology, without which surgery cannot progress. This article surveys some highlights in the history of surgery in ancient China and examines the factors responsible for its decline. The second concluding part deals with orthopaedics.

  17. STS-96 Mission Highlights. Part 2

    NASA Technical Reports Server (NTRS)

    1999-01-01

    In this second part of a three-part video mission-highlights set, on-orbit spacecrew activities performed on the STS-96 Space Shuttle Orbiter Discovery and the International Space Station are reviewed. The flight crew consists of Kent V. Rominger, Commander; Rick D. Husband, Pilot; and Mission Specialists Ellen Ochoa, Tamara E. Jernigan, Daniel T. Barry, Julie Payette (Canadian), and Valery Ivanovich Tokarev (Russian). The primary goals of this mission were to work on logistics and resupply the International Space Station. This second part in the mission series features video from Flight Day 4-7 (FD 4-7). FD 4 of STS-96 presents astronauts Tammy Jernigan and Dan Barry completing the second longest space walk in shuttle history. Footage includes Jernigan and Barry transferring and installing two cranes from the shuttle's payload bay to locations on the outside of the station. The astronauts enter the International Space Station delivering supplies and prepare the outpost to receive its first resident crew, scheduled to arrive in early 2000 on FD 5. The video also captures the crew involved in logistics transfer activities within the Discovery/ISS orbiting complex. FD 6 includes footage of Valery Tokarev and Canadian astronaut Julie Payette charging out the final six battery recharge controller units for two of Zarya's power-producing batteries and all crew members' involvement in logistics transfer activities from the SPACEHAB module to designated locations in the International Space Station. With the transfer work of FD 6 all but complete, the astronauts conduct some additional work, installing parts of a wireless strain gauge system that will help engineers track the effects of adding modules to the station throughout its assembly. Moving the few remaining items from Discovery to the ISS, then closing a series of hatches within the station's modules leading back to the shuttle are the primary activities contained in FD 7. Final coverage features Discovery

  18. Magnet hospitals: Part II. Institutions of excellence.

    PubMed

    Kramer, M; Schmalenberg, C

    1988-02-01

    The oft repeated charge today is to "focus on those who are succeeding!" That's what this report does. Using the eight characteristics identified by Peters and Waterman in their book In Search of Excellence, the study analyzes 16 magnet hospitals to ascertain to what extent they possess characteristics similar to the 'best run' companies in the corporate community. The authors suggest that these magnet hospitals may be dealing effectively with the nursing shortage by creating organizational conditions conducive to eliminating internal nurse shortage. Part I of this article appeared the January 1988 issue of JONA.

  19. Catalog of infrared observations. Part 2: Appendixes

    NASA Technical Reports Server (NTRS)

    Gezari, Daniel Y.; Schmitz, Marion; Mead, Jaylee M.

    1987-01-01

    The Catalog of Infrared Observations (CIO) is a compilation of infrared astronomical observational data obtained from an extensive literature search of astronomical journals and major astronomical catalogs and surveys. The literature searches are complete for years 1965 to 1986. Supporting appendixes are published in this part. The appendices include an atlas of infrared source positions, two bibliographies of infrared literature upon which the search was based, and, keyed to the main Catalog listings (organized alphabetically by first author, and by date), an atlas of infrared spectral ranges, and IRAS data for the CIO sources. The complete CIO database is available to qualified users in printed microfiche and magnetic tape formats.

  20. Catalog of infrared observations. Part 2: Appendixes

    NASA Astrophysics Data System (ADS)

    Gezari, Daniel Y.; Schmitz, Marion; Mead, Jaylee M.

    1987-12-01

    The Catalog of Infrared Observations (CIO) is a compilation of infrared astronomical observational data obtained from an extensive literature search of astronomical journals and major astronomical catalogs and surveys. The literature searches are complete for years 1965 to 1986. Supporting appendixes are published in this part. The appendices include an atlas of infrared source positions, two bibliographies of infrared literature upon which the search was based, and, keyed to the main Catalog listings (organized alphabetically by first author, and by date), an atlas of infrared spectral ranges, and IRAS data for the CIO sources. The complete CIO database is available to qualified users in printed microfiche and magnetic tape formats.