The development of a computer-assisted instruction system for clinical nursing skills with virtual instruments concepts: A case study for intra-aortic balloon pumping.

PubMed

Chang, Ching-I; Yan, Huey-Yeu; Sung, Wen-Hsu; Shen, Shu-Cheng; Chuang, Pao-Yu

2006-01-01

The purpose of this research was to develop a computer-aided instruction system for intra-aortic balloon pumping (IABP) skills in clinical nursing with virtual instrument (VI) concepts. Computer graphic technologies were incorporated to provide not only static clinical nursing education, but also the simulated function of operating an expensive medical instrument with VI techniques. The content of nursing knowledge was adapted from current well-accepted clinical training materials. The VI functions were developed using computer graphic technology with photos of real medical instruments taken by digital camera. We wish the system could provide beginners of nursing education important teaching assistance.

Using Agent Base Models to Optimize Large Scale Network for Large System Inventories

NASA Technical Reports Server (NTRS)

Shameldin, Ramez Ahmed; Bowling, Shannon R.

2010-01-01

The aim of this paper is to use Agent Base Models (ABM) to optimize large scale network handling capabilities for large system inventories and to implement strategies for the purpose of reducing capital expenses. The models used in this paper either use computational algorithms or procedure implementations developed by Matlab to simulate agent based models in a principal programming language and mathematical theory using clusters, these clusters work as a high performance computational performance to run the program in parallel computational. In both cases, a model is defined as compilation of a set of structures and processes assumed to underlie the behavior of a network system.

Reduced-Order Models for the Aeroelastic Analysis of Ares Launch Vehicles

NASA Technical Reports Server (NTRS)

Silva, Walter A.; Vatsa, Veer N.; Biedron, Robert T.

2010-01-01

This document presents the development and application of unsteady aerodynamic, structural dynamic, and aeroelastic reduced-order models (ROMs) for the ascent aeroelastic analysis of the Ares I-X flight test and Ares I crew launch vehicles using the unstructured-grid, aeroelastic FUN3D computational fluid dynamics (CFD) code. The purpose of this work is to perform computationally-efficient aeroelastic response calculations that would be prohibitively expensive via computation of multiple full-order aeroelastic FUN3D solutions. These efficient aeroelastic ROM solutions provide valuable insight regarding the aeroelastic sensitivity of the vehicles to various parameters over a range of dynamic pressures.

Using Approximations to Accelerate Engineering Design Optimization

NASA Technical Reports Server (NTRS)

Torczon, Virginia; Trosset, Michael W.

1998-01-01

Optimization problems that arise in engineering design are often characterized by several features that hinder the use of standard nonlinear optimization techniques. Foremost among these features is that the functions used to define the engineering optimization problem often are computationally intensive. Within a standard nonlinear optimization algorithm, the computational expense of evaluating the functions that define the problem would necessarily be incurred for each iteration of the optimization algorithm. Faced with such prohibitive computational costs, an attractive alternative is to make use of surrogates within an optimization context since surrogates can be chosen or constructed so that they are typically much less expensive to compute. For the purposes of this paper, we will focus on the use of algebraic approximations as surrogates for the objective. In this paper we introduce the use of so-called merit functions that explicitly recognize the desirability of improving the current approximation to the objective during the course of the optimization. We define and experiment with the use of merit functions chosen to simultaneously improve both the solution to the optimization problem (the objective) and the quality of the approximation. Our goal is to further improve the effectiveness of our general approach without sacrificing any of its rigor.

48 CFR 9904.410-60 - Illustrations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... budgets for the other segment should be removed from B's G&A expense pool and transferred to the other...; all home office expenses allocated to Segment H are included in Segment H's G&A expense pool. (2) This... cost of scientific computer operations in its G&A expense pool. The scientific computer is used...

48 CFR 9904.410-60 - Illustrations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... budgets for the other segment should be removed from B's G&A expense pool and transferred to the other...; all home office expenses allocated to Segment H are included in Segment H's G&A expense pool. (2) This... cost of scientific computer operations in its G&A expense pool. The scientific computer is used...

26 CFR 1.162-17 - Reporting and substantiation of certain business expenses of employees.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., entertainment, and similar purposes paid or incurred by him solely for the benefit of his employer for which he... transportation, meals and lodging while away from home overnight, entertainment expenses, and other business... overnight, entertainment expenses, and other business expenses. For this purpose, the Commissioner in his...

26 CFR 1.162-17 - Reporting and substantiation of certain business expenses of employees.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., entertainment, and similar purposes paid or incurred by him solely for the benefit of his employer for which he... transportation, meals and lodging while away from home overnight, entertainment expenses, and other business... overnight, entertainment expenses, and other business expenses. For this purpose, the Commissioner in his...

26 CFR 1.162-17 - Reporting and substantiation of certain business expenses of employees.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., entertainment, and similar purposes paid or incurred by him solely for the benefit of his employer for which he... transportation, meals and lodging while away from home overnight, entertainment expenses, and other business... overnight, entertainment expenses, and other business expenses. For this purpose, the Commissioner in his...

26 CFR 1.162-17 - Reporting and substantiation of certain business expenses of employees.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., entertainment, and similar purposes paid or incurred by him solely for the benefit of his employer for which he... transportation, meals and lodging while away from home overnight, entertainment expenses, and other business... overnight, entertainment expenses, and other business expenses. For this purpose, the Commissioner in his...

A Markov Chain-based quantitative study of angular distribution of photons through turbid slabs via isotropic light scattering

NASA Astrophysics Data System (ADS)

Li, Xuesong; Northrop, William F.

2016-04-01

This paper describes a quantitative approach to approximate multiple scattering through an isotropic turbid slab based on Markov Chain theorem. There is an increasing need to utilize multiple scattering for optical diagnostic purposes; however, existing methods are either inaccurate or computationally expensive. Here, we develop a novel Markov Chain approximation approach to solve multiple scattering angular distribution (AD) that can accurately calculate AD while significantly reducing computational cost compared to Monte Carlo simulation. We expect this work to stimulate ongoing multiple scattering research and deterministic reconstruction algorithm development with AD measurements.

24 CFR 990.170 - Computation of utilities expense level (UEL): Overview.

Code of Federal Regulations, 2010 CFR

2010-04-01

... level (UEL): Overview. 990.170 Section 990.170 Housing and Urban Development Regulations Relating to... Expenses § 990.170 Computation of utilities expense level (UEL): Overview. (a) General. The UEL for each... by the payable consumption level multiplied by the inflation factor. The UEL is expressed in terms of...

11 CFR 9008.52 - Receipts and disbursements of host committees.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Committees and Municipal Funds Representing a Convention City § 9008.52 Receipts and disbursements of host... purposes: (1) To defray those expenses incurred for the purpose of promoting the suitability of the city as... the city, such as expenses for information booths, receptions, and tours; (3) To defray those expenses...

11 CFR 9008.52 - Receipts and disbursements of host committees.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Committees and Municipal Funds Representing a Convention City § 9008.52 Receipts and disbursements of host... purposes: (1) To defray those expenses incurred for the purpose of promoting the suitability of the city as... the city, such as expenses for information booths, receptions, and tours; (3) To defray those expenses...

Human Machine Interfaces for Teleoperators and Virtual Environments Conference

NASA Technical Reports Server (NTRS)

1990-01-01

In a teleoperator system the human operator senses, moves within, and operates upon a remote or hazardous environment by means of a slave mechanism (a mechanism often referred to as a teleoperator). In a virtual environment system the interactive human machine interface is retained but the slave mechanism and its environment are replaced by a computer simulation. Video is replaced by computer graphics. The auditory and force sensations imparted to the human operator are similarly computer generated. In contrast to a teleoperator system, where the purpose is to extend the operator's sensorimotor system in a manner that facilitates exploration and manipulation of the physical environment, in a virtual environment system, the purpose is to train, inform, alter, or study the human operator to modify the state of the computer and the information environment. A major application in which the human operator is the target is that of flight simulation. Although flight simulators have been around for more than a decade, they had little impact outside aviation presumably because the application was so specialized and so expensive.

7 CFR 762.121 - Loan purposes.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., processing or marketing purposes; (iii) Payment of annual farm operating expenses, examples of which include feed, seed, fertilizer, pesticides, farm supplies, repairs and improvements which are to be expensed... or OL purposes. (v) Purchase of cooperative stock for credit, production, processing or marketing...

A Toolkit for ARB to Integrate Custom Databases and Externally Built Phylogenies

DOE PAGES

Essinger, Steven D.; Reichenberger, Erin; Morrison, Calvin; ...

2015-01-21

Researchers are perpetually amassing biological sequence data. The computational approaches employed by ecologists for organizing this data (e.g. alignment, phylogeny, etc.) typically scale nonlinearly in execution time with the size of the dataset. This often serves as a bottleneck for processing experimental data since many molecular studies are characterized by massive datasets. To keep up with experimental data demands, ecologists are forced to choose between continually upgrading expensive in-house computer hardware or outsourcing the most demanding computations to the cloud. Outsourcing is attractive since it is the least expensive option, but does not necessarily allow direct user interaction with themore » data for exploratory analysis. Desktop analytical tools such as ARB are indispensable for this purpose, but they do not necessarily offer a convenient solution for the coordination and integration of datasets between local and outsourced destinations. Therefore, researchers are currently left with an undesirable tradeoff between computational throughput and analytical capability. To mitigate this tradeoff we introduce a software package to leverage the utility of the interactive exploratory tools offered by ARB with the computational throughput of cloud-based resources. Our pipeline serves as middleware between the desktop and the cloud allowing researchers to form local custom databases containing sequences and metadata from multiple resources and a method for linking data outsourced for computation back to the local database. Furthermore, a tutorial implementation of the toolkit is provided in the supporting information, S1 Tutorial.« less

A Toolkit for ARB to Integrate Custom Databases and Externally Built Phylogenies

PubMed Central

Essinger, Steven D.; Reichenberger, Erin; Morrison, Calvin; Blackwood, Christopher B.; Rosen, Gail L.

2015-01-01

Researchers are perpetually amassing biological sequence data. The computational approaches employed by ecologists for organizing this data (e.g. alignment, phylogeny, etc.) typically scale nonlinearly in execution time with the size of the dataset. This often serves as a bottleneck for processing experimental data since many molecular studies are characterized by massive datasets. To keep up with experimental data demands, ecologists are forced to choose between continually upgrading expensive in-house computer hardware or outsourcing the most demanding computations to the cloud. Outsourcing is attractive since it is the least expensive option, but does not necessarily allow direct user interaction with the data for exploratory analysis. Desktop analytical tools such as ARB are indispensable for this purpose, but they do not necessarily offer a convenient solution for the coordination and integration of datasets between local and outsourced destinations. Therefore, researchers are currently left with an undesirable tradeoff between computational throughput and analytical capability. To mitigate this tradeoff we introduce a software package to leverage the utility of the interactive exploratory tools offered by ARB with the computational throughput of cloud-based resources. Our pipeline serves as middleware between the desktop and the cloud allowing researchers to form local custom databases containing sequences and metadata from multiple resources and a method for linking data outsourced for computation back to the local database. A tutorial implementation of the toolkit is provided in the supporting information, S1 Tutorial. Availability: http://www.ece.drexel.edu/gailr/EESI/tutorial.php. PMID:25607539

A Deterministic Computational Procedure for Space Environment Electron Transport

NASA Technical Reports Server (NTRS)

Nealy, John E.; Chang, C. K.; Norman, Ryan B.; Blattnig, Steve R.; Badavi, Francis F.; Adamcyk, Anne M.

2010-01-01

A deterministic computational procedure for describing the transport of electrons in condensed media is formulated to simulate the effects and exposures from spectral distributions typical of electrons trapped in planetary magnetic fields. The primary purpose for developing the procedure is to provide a means of rapidly performing numerous repetitive transport calculations essential for electron radiation exposure assessments for complex space structures. The present code utilizes well-established theoretical representations to describe the relevant interactions and transport processes. A combined mean free path and average trajectory approach is used in the transport formalism. For typical space environment spectra, several favorable comparisons with Monte Carlo calculations are made which have indicated that accuracy is not compromised at the expense of the computational speed.

28 CFR 94.11 - Purpose; construction and severability.

Code of Federal Regulations, 2013 CFR

2013-07-01

... International Terrorism Victim Expense Reimbursement Program Introduction § 94.11 Purpose; construction and... acts of international terrorism that occur outside the United States, for expenses associated with that...

28 CFR 94.11 - Purpose; construction and severability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... International Terrorism Victim Expense Reimbursement Program Introduction § 94.11 Purpose; construction and... acts of international terrorism that occur outside the United States, for expenses associated with that...

28 CFR 94.11 - Purpose; construction and severability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... International Terrorism Victim Expense Reimbursement Program Introduction § 94.11 Purpose; construction and... acts of international terrorism that occur outside the United States, for expenses associated with that...

28 CFR 94.11 - Purpose; construction and severability.

Code of Federal Regulations, 2014 CFR

2014-07-01

... International Terrorism Victim Expense Reimbursement Program Introduction § 94.11 Purpose; construction and... acts of international terrorism that occur outside the United States, for expenses associated with that...

28 CFR 94.11 - Purpose; construction and severability.

Code of Federal Regulations, 2012 CFR

2012-07-01

... International Terrorism Victim Expense Reimbursement Program Introduction § 94.11 Purpose; construction and... acts of international terrorism that occur outside the United States, for expenses associated with that...

41 CFR 301-75.1 - What is the purpose of the allowance for pre-employment interview travel expenses?

Code of Federal Regulations, 2010 CFR

2010-07-01

... the allowance for pre-employment interview travel expenses? 301-75.1 Section 301-75.1 Public Contracts... RESPONSIBILITIES 75-PRE-EMPLOYMENT INTERVIEW TRAVEL General Rules § 301-75.1 What is the purpose of the allowance for pre-employment interview travel expenses? To help you recruit highly qualified individuals. ...

Fixed-Base Comb with Window-Non-Adjacent Form (NAF) Method for Scalar Multiplication

PubMed Central

Seo, Hwajeong; Kim, Hyunjin; Park, Taehwan; Lee, Yeoncheol; Liu, Zhe; Kim, Howon

2013-01-01

Elliptic curve cryptography (ECC) is one of the most promising public-key techniques in terms of short key size and various crypto protocols. For this reason, many studies on the implementation of ECC on resource-constrained devices within a practical execution time have been conducted. To this end, we must focus on scalar multiplication, which is the most expensive operation in ECC. A number of studies have proposed pre-computation and advanced scalar multiplication using a non-adjacent form (NAF) representation, and more sophisticated approaches have employed a width-w NAF representation and a modified pre-computation table. In this paper, we propose a new pre-computation method in which zero occurrences are much more frequent than in previous methods. This method can be applied to ordinary group scalar multiplication, but it requires large pre-computation table, so we combined the previous method with ours for practical purposes. This novel structure establishes a new feature that adjusts speed performance and table size finely, so we can customize the pre-computation table for our own purposes. Finally, we can establish a customized look-up table for embedded microprocessors. PMID:23881143

A meta-analysis of outcomes from the use of computer-simulated experiments in science education

NASA Astrophysics Data System (ADS)

Lejeune, John Van

The purpose of this study was to synthesize the findings from existing research on the effects of computer simulated experiments on students in science education. Results from 40 reports were integrated by the process of meta-analysis to examine the effect of computer-simulated experiments and interactive videodisc simulations on student achievement and attitudes. Findings indicated significant positive differences in both low-level and high-level achievement of students who use computer-simulated experiments and interactive videodisc simulations as compared to students who used more traditional learning activities. No significant differences in retention, student attitudes toward the subject, or toward the educational method were found. Based on the findings of this study, computer-simulated experiments and interactive videodisc simulations should be used to enhance students' learning in science, especially in cases where the use of traditional laboratory activities are expensive, dangerous, or impractical.

Hardware for hard-up schools?

NASA Astrophysics Data System (ADS)

St John, Stuart A.

2012-01-01

The purpose of this work was to investigate ways in which everyday computers can be used in schools to fulfil several of the roles of more expensive, specialized laboratory equipment for teaching and learning purposes. The brief adopted was to keep things as straightforward as possible so that any school science department with a few basic tools can copy the ideas presented. The project has so far produced a simple, safe input device to enable use of a computer as an oscilloscope and the conversion of external speakers into a signal generator. They are not without their limitations, but the intention is that they may provide opportunities for hands-on learning in schools where budgets are very limited. Several teaching ideas are outlined, with pointers for further development. It is hoped that interest in the project may generate further application of the ideas to the teaching of high school physics.

49 CFR 1242.46 - Computers and data processing equipment (account XX-27-46).

Code of Federal Regulations, 2012 CFR

2012-10-01

... REPORTS SEPARATION OF COMMON OPERATING EXPENSES BETWEEN FREIGHT SERVICE AND PASSENGER SERVICE FOR RAILROADS 1 Operating Expenses-Equipment § 1242.46 Computers and data processing equipment (account XX-27-46... 49 Transportation 9 2012-10-01 2012-10-01 false Computers and data processing equipment (account...

49 CFR 1242.46 - Computers and data processing equipment (account XX-27-46).

Code of Federal Regulations, 2013 CFR

2013-10-01

... REPORTS SEPARATION OF COMMON OPERATING EXPENSES BETWEEN FREIGHT SERVICE AND PASSENGER SERVICE FOR RAILROADS 1 Operating Expenses-Equipment § 1242.46 Computers and data processing equipment (account XX-27-46... 49 Transportation 9 2013-10-01 2013-10-01 false Computers and data processing equipment (account...

49 CFR 1242.46 - Computers and data processing equipment (account XX-27-46).

Code of Federal Regulations, 2011 CFR

2011-10-01

... REPORTS SEPARATION OF COMMON OPERATING EXPENSES BETWEEN FREIGHT SERVICE AND PASSENGER SERVICE FOR RAILROADS 1 Operating Expenses-Equipment § 1242.46 Computers and data processing equipment (account XX-27-46... 49 Transportation 9 2011-10-01 2011-10-01 false Computers and data processing equipment (account...

49 CFR 1242.46 - Computers and data processing equipment (account XX-27-46).

Code of Federal Regulations, 2014 CFR

2014-10-01

... REPORTS SEPARATION OF COMMON OPERATING EXPENSES BETWEEN FREIGHT SERVICE AND PASSENGER SERVICE FOR RAILROADS 1 Operating Expenses-Equipment § 1242.46 Computers and data processing equipment (account XX-27-46... 49 Transportation 9 2014-10-01 2014-10-01 false Computers and data processing equipment (account...

49 CFR 1242.46 - Computers and data processing equipment (account XX-27-46).

Code of Federal Regulations, 2010 CFR

2010-10-01

... REPORTS SEPARATION OF COMMON OPERATING EXPENSES BETWEEN FREIGHT SERVICE AND PASSENGER SERVICE FOR RAILROADS 1 Operating Expenses-Equipment § 1242.46 Computers and data processing equipment (account XX-27-46... 49 Transportation 9 2010-10-01 2010-10-01 false Computers and data processing equipment (account...

18 CFR 35.24 - Tax normalization for public utilities.

Code of Federal Regulations, 2011 CFR

2011-04-01

... the Natural Gas Act. (7) Tax effect means the tax reduction or addition associated with a specific... purposes; (v) Differences that arise from recognition of research, development, and demonstration... purchased gas costs as a current expense for tax purposes but as a deferred expense for book purposes. (See...

38 CFR 8.24 - Expenses incident to examinations for insurance purposes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... insurance purposes. Except as provided in § 8.22, necessary transportation expenses incident to physical or mental examinations for insurance purposes at regional offices or medical facilities shall be furnished... schedule of fees in effect and approved by the Department of Veterans Affairs for medical and professional...

Parallel implementation of geometrical shock dynamics for two dimensional converging shock waves

NASA Astrophysics Data System (ADS)

Qiu, Shi; Liu, Kuang; Eliasson, Veronica

2016-10-01

Geometrical shock dynamics (GSD) theory is an appealing method to predict the shock motion in the sense that it is more computationally efficient than solving the traditional Euler equations, especially for converging shock waves. However, to solve and optimize large scale configurations, the main bottleneck is the computational cost. Among the existing numerical GSD schemes, there is only one that has been implemented on parallel computers, with the purpose to analyze detonation waves. To extend the computational advantage of the GSD theory to more general applications such as converging shock waves, a numerical implementation using a spatial decomposition method has been coupled with a front tracking approach on parallel computers. In addition, an efficient tridiagonal system solver for massively parallel computers has been applied to resolve the most expensive function in this implementation, resulting in an efficiency of 0.93 while using 32 HPCC cores. Moreover, symmetric boundary conditions have been developed to further reduce the computational cost, achieving a speedup of 19.26 for a 12-sided polygonal converging shock.

Sensitivity Analysis for Coupled Aero-structural Systems

NASA Technical Reports Server (NTRS)

Giunta, Anthony A.

1999-01-01

A novel method has been developed for calculating gradients of aerodynamic force and moment coefficients for an aeroelastic aircraft model. This method uses the Global Sensitivity Equations (GSE) to account for the aero-structural coupling, and a reduced-order modal analysis approach to condense the coupling bandwidth between the aerodynamic and structural models. Parallel computing is applied to reduce the computational expense of the numerous high fidelity aerodynamic analyses needed for the coupled aero-structural system. Good agreement is obtained between aerodynamic force and moment gradients computed with the GSE/modal analysis approach and the same quantities computed using brute-force, computationally expensive, finite difference approximations. A comparison between the computational expense of the GSE/modal analysis method and a pure finite difference approach is presented. These results show that the GSE/modal analysis approach is the more computationally efficient technique if sensitivity analysis is to be performed for two or more aircraft design parameters.

47 CFR 69.156 - Marketing expenses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 3 2014-10-01 2014-10-01 false Marketing expenses. 69.156 Section 69.156... Computation of Charges for Price Cap Local Exchange Carriers § 69.156 Marketing expenses. Effective July 1, 2000, the marketing expenses formerly allocated to the common line and traffic sensitive baskets, and...

47 CFR 69.156 - Marketing expenses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 3 2012-10-01 2012-10-01 false Marketing expenses. 69.156 Section 69.156... Computation of Charges for Price Cap Local Exchange Carriers § 69.156 Marketing expenses. Effective July 1, 2000, the marketing expenses formerly allocated to the common line and traffic sensitive baskets, and...

47 CFR 69.156 - Marketing expenses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 3 2011-10-01 2011-10-01 false Marketing expenses. 69.156 Section 69.156... Computation of Charges for Price Cap Local Exchange Carriers § 69.156 Marketing expenses. Effective July 1, 2000, the marketing expenses formerly allocated to the common line and traffic sensitive baskets, and...

47 CFR 69.156 - Marketing expenses.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Marketing expenses. 69.156 Section 69.156... Computation of Charges for Price Cap Local Exchange Carriers § 69.156 Marketing expenses. Effective July 1, 2000, the marketing expenses formerly allocated to the common line and traffic sensitive baskets, and...

47 CFR 69.156 - Marketing expenses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 3 2013-10-01 2013-10-01 false Marketing expenses. 69.156 Section 69.156... Computation of Charges for Price Cap Local Exchange Carriers § 69.156 Marketing expenses. Effective July 1, 2000, the marketing expenses formerly allocated to the common line and traffic sensitive baskets, and...

10 CFR 455.80 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... ENERGY CONSERVATION GRANT PROGRAMS FOR SCHOOLS AND HOSPITALS AND BUILDINGS OWNED BY UNITS OF LOCAL GOVERNMENT AND PUBLIC CARE INSTITUTIONS State Administrative Expenses § 455.80 Purpose. This subpart describes what constitutes a State administrative expense that may receive financial assistance under this...

BioNetFit: a fitting tool compatible with BioNetGen, NFsim and distributed computing environments

PubMed Central

Thomas, Brandon R.; Chylek, Lily A.; Colvin, Joshua; Sirimulla, Suman; Clayton, Andrew H.A.; Hlavacek, William S.; Posner, Richard G.

2016-01-01

Summary: Rule-based models are analyzed with specialized simulators, such as those provided by the BioNetGen and NFsim open-source software packages. Here, we present BioNetFit, a general-purpose fitting tool that is compatible with BioNetGen and NFsim. BioNetFit is designed to take advantage of distributed computing resources. This feature facilitates fitting (i.e. optimization of parameter values for consistency with data) when simulations are computationally expensive. Availability and implementation: BioNetFit can be used on stand-alone Mac, Windows/Cygwin, and Linux platforms and on Linux-based clusters running SLURM, Torque/PBS, or SGE. The BioNetFit source code (Perl) is freely available (http://bionetfit.nau.edu). Supplementary information: Supplementary data are available at Bioinformatics online. Contact: bionetgen.help@gmail.com PMID:26556387

Surrogates for numerical simulations; optimization of eddy-promoter heat exchangers

NASA Technical Reports Server (NTRS)

Patera, Anthony T.; Patera, Anthony

1993-01-01

Although the advent of fast and inexpensive parallel computers has rendered numerous previously intractable calculations feasible, many numerical simulations remain too resource-intensive to be directly inserted in engineering optimization efforts. An attractive alternative to direct insertion considers models for computational systems: the expensive simulation is evoked only to construct and validate a simplified, input-output model; this simplified input-output model then serves as a simulation surrogate in subsequent engineering optimization studies. A simple 'Bayesian-validated' statistical framework for the construction, validation, and purposive application of static computer simulation surrogates is presented. As an example, dissipation-transport optimization of laminar-flow eddy-promoter heat exchangers are considered: parallel spectral element Navier-Stokes calculations serve to construct and validate surrogates for the flowrate and Nusselt number; these surrogates then represent the originating Navier-Stokes equations in the ensuing design process.

A Practical, Robust Methodology for Acquiring New Observation Data Using Computationally Expensive Groundwater Models

NASA Astrophysics Data System (ADS)

Siade, Adam J.; Hall, Joel; Karelse, Robert N.

2017-11-01

Regional groundwater flow models play an important role in decision making regarding water resources; however, the uncertainty embedded in model parameters and model assumptions can significantly hinder the reliability of model predictions. One way to reduce this uncertainty is to collect new observation data from the field. However, determining where and when to obtain such data is not straightforward. There exist a number of data-worth and experimental design strategies developed for this purpose. However, these studies often ignore issues related to real-world groundwater models such as computational expense, existing observation data, high-parameter dimension, etc. In this study, we propose a methodology, based on existing methods and software, to efficiently conduct such analyses for large-scale, complex regional groundwater flow systems for which there is a wealth of available observation data. The method utilizes the well-established d-optimality criterion, and the minimax criterion for robust sampling strategies. The so-called Null-Space Monte Carlo method is used to reduce the computational burden associated with uncertainty quantification. And, a heuristic methodology, based on the concept of the greedy algorithm, is proposed for developing robust designs with subsets of the posterior parameter samples. The proposed methodology is tested on a synthetic regional groundwater model, and subsequently applied to an existing, complex, regional groundwater system in the Perth region of Western Australia. The results indicate that robust designs can be obtained efficiently, within reasonable computational resources, for making regional decisions regarding groundwater level sampling.

48 CFR 227.7103-6 - Contract clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... private expense). Do not use the clause when the only deliverable items are computer software or computer software documentation (see 227.72), commercial items developed exclusively at private expense (see 227... the clause in architect-engineer and construction contracts. (b)(1) Use the clause at 252.227-7013...

48 CFR 227.7103-6 - Contract clauses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... private expense). Do not use the clause when the only deliverable items are computer software or computer software documentation (see 227.72), commercial items developed exclusively at private expense (see 227... the clause in architect-engineer and construction contracts. (b)(1) Use the clause at 252.227-7013...

A survey of GPU-based medical image computing techniques

PubMed Central

Shi, Lin; Liu, Wen; Zhang, Heye; Xie, Yongming

2012-01-01

Medical imaging currently plays a crucial role throughout the entire clinical applications from medical scientific research to diagnostics and treatment planning. However, medical imaging procedures are often computationally demanding due to the large three-dimensional (3D) medical datasets to process in practical clinical applications. With the rapidly enhancing performances of graphics processors, improved programming support, and excellent price-to-performance ratio, the graphics processing unit (GPU) has emerged as a competitive parallel computing platform for computationally expensive and demanding tasks in a wide range of medical image applications. The major purpose of this survey is to provide a comprehensive reference source for the starters or researchers involved in GPU-based medical image processing. Within this survey, the continuous advancement of GPU computing is reviewed and the existing traditional applications in three areas of medical image processing, namely, segmentation, registration and visualization, are surveyed. The potential advantages and associated challenges of current GPU-based medical imaging are also discussed to inspire future applications in medicine. PMID:23256080

Fast and Reliable Thermodynamic Approach for Determining the Protonation State of the Asp Dyad.

PubMed

Huang, Jinfeng; Sun, Bin; Yao, Yuan; Liu, Junjun

2017-09-25

The protonation state of the asp dyad is significantly important in revealing enzymatic mechanisms and developing drugs. However, it is hard to determine by calculating free energy changes between possible protonation states, because the free energy changes due to protein conformational flexibility are usually much larger than those originating from different locations of protons. Sophisticated and computationally expensive methods such as free energy perturbation, thermodynamic integration (TI), and quantum mechanics/molecular mechanics are therefore usually used for this purpose. In the present study, we have developed a simple thermodynamic approach to effectively eliminating the free energy changes arising from protein conformational flexibility and estimating the free energy changes only originated from the locations of protons, which provides a fast and reliable method for determining the protonation state of asp dyads. The test of this approach on a total of 15 asp dyad systems, including BACE-1 and HIV-1 protease, shows that the predictions from this approach are all consistent with experiments or with the computationally expensive TI calculations. It is clear that our thermodynamic approach could be used to rapidly and reliably determine the protonation state of the asp dyad.

The Shock and Vibration Bulletin. Part 1. Welcome, Keynote Address Invited Papers MIL-STD-810D MIL-STD-810D Panel Session

DTIC Science & Technology

1984-06-01

computer. The testing purposes is both expensive and time failure criterion is basically the effective comsuming , making it more difficult to obtain... behavior of a structure in terms of do critical review on a science because a its normal modes. The fundamental *science is something that ia fact... behavior expressed in some simple sort of rules of living in the Garden of Eden; they characteristic, and a deflected shape of each could eat from any

41 CFR 302-17.3 - Types of moving expenses or allowances covered and general limitations.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-RELOCATION INCOME TAX (RIT) ALLOWANCE § 302-17.3 Types of moving expenses or allowances covered and general... law authorizes reimbursement of additional income taxes resulting from certain moving expenses... actually paid or incurred, and are not allowable as a moving expense deduction for tax purposes. The types...

User manual for two simple postscript output FORTRAN plotting routines

NASA Technical Reports Server (NTRS)

Nguyen, T. X.

1991-01-01

Graphics is one of the important tools in engineering analysis and design. However, plotting routines that generate output on high quality laser printers normally come in graphics packages, which tend to be expensive and system dependent. These factors become important for small computer systems or desktop computers, especially when only some form of a simple plotting routine is sufficient. With the Postscript language becoming popular, there are more and more Postscript laser printers now available. Simple, versatile, low cost plotting routines that can generate output on high quality laser printers are needed and standard FORTRAN language plotting routines using output in Postscript language seems logical. The purpose here is to explain two simple FORTRAN plotting routines that generate output in Postscript language.

Solvers for the Cardiac Bidomain Equations

PubMed Central

Vigmond, E.J.; Weber dos Santos, R.; Prassl, A.J.; Deo, M.; Plank, G.

2010-01-01

The bidomain equations are widely used for the simulation of electrical activity in cardiac tissue. They are especially important for accurately modelling extracellular stimulation, as evidenced by their prediction of virtual electrode polarization before experimental verification. However, solution of the equations is computationally expensive due to the fine spatial and temporal discretization needed. This limits the size and duration of the problem which can be modeled. Regardless of the specific form into which they are cast, the computational bottleneck becomes the repeated solution of a large, linear system. The purpose of this review is to give an overview of the equations, and the methods by which they have been solved. Of particular note are recent developments in multigrid methods, which have proven to be the most efficient. PMID:17900668

Survey of equipment in general practice.

PubMed Central

Bradley, N.; Watkins, S.

1989-01-01

Partners in general practice have to buy any equipment they want themselves. As a result partners in high investing practices have lower net incomes. Of the 297 practices in Devon and Cornwall, 265 responded to a questionnaire listing 115 possible items of practice equipment. Overall, practices seemed to be fairly well equipped. Key findings were that 193 of those who responded had an electrocardiograph, 206 had a kit for minor operations, 119 owned a computer, and less than one third owned a microscope. Most of these practices were high investors. There seems to be a shift away from some traditional instruments towards expensive information technology. Government policies are encouraging the use of computers and such equipment, though funds are not necessarily being made available for this purpose. PMID:2507005

24 CFR 990.165 - Computation of project expense level (PEL).

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Computation of project expense level (PEL). 990.165 Section 990.165 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR PUBLIC AND INDIAN HOUSING, DEPARTMENT OF...

49 CFR 1242.05 - Operating expense account number notation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... group signifies applicable function assignment. ec03mr91.050 (b) For reporting purposes, four natural..., tools, supplies, fuels and lubricants (account 21-XX-XX); purchased services (accounts 31-XX-XX to 41-XX... account structure. For reporting purposes, the natural expense account numbers represented by “XX” include...

49 CFR 1242.05 - Operating expense account number notation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... group signifies applicable function assignment. ec03mr91.050 (b) For reporting purposes, four natural..., tools, supplies, fuels and lubricants (account 21-XX-XX); purchased services (accounts 31-XX-XX to 41-XX... account structure. For reporting purposes, the natural expense account numbers represented by “XX” include...

49 CFR 1242.05 - Operating expense account number notation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... group signifies applicable function assignment. ec03mr91.050 (b) For reporting purposes, four natural..., tools, supplies, fuels and lubricants (account 21-XX-XX); purchased services (accounts 31-XX-XX to 41-XX... account structure. For reporting purposes, the natural expense account numbers represented by “XX” include...

49 CFR 1242.05 - Operating expense account number notation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... group signifies applicable function assignment. ec03mr91.050 (b) For reporting purposes, four natural..., tools, supplies, fuels and lubricants (account 21-XX-XX); purchased services (accounts 31-XX-XX to 41-XX... account structure. For reporting purposes, the natural expense account numbers represented by “XX” include...

Parental Participation Fees in School Expenses in Israel

ERIC Educational Resources Information Center

Shaked, Haim

2016-01-01

Purpose: Many countries throughout the world provide all children with free education. However, sometimes there are user charges in publically funded schools worldwide. The purpose of this paper is to explore parental participation fees in school expenses in Israel, depicting the current situation and analyzing its implications.…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mueller, Juliane

MISO is an optimization framework for solving computationally expensive mixed-integer, black-box, global optimization problems. MISO uses surrogate models to approximate the computationally expensive objective function. Hence, derivative information, which is generally unavailable for black-box simulation objective functions, is not needed. MISO allows the user to choose the initial experimental design strategy, the type of surrogate model, and the sampling strategy.

48 CFR 9905.506-60 - Illustrations.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., installs a computer service center to begin operations on May 1. The operating expense related to the new... operating expenses of the computer service center for the 8-month part of the cost accounting period may be... 48 Federal Acquisition Regulations System 7 2013-10-01 2012-10-01 true Illustrations. 9905.506-60...

26 CFR 1.50B-1 - Definitions of WIN expenses and WIN employees.

Code of Federal Regulations, 2010 CFR

2010-04-01

... employee. (c) Trade or business expenses. The term “WIN expenses” includes only salaries and wages which... 26 Internal Revenue 1 2010-04-01 2010-04-01 true Definitions of WIN expenses and WIN employees. 1... INCOME TAXES Rules for Computing Credit for Expenses of Work Incentive Programs § 1.50B-1 Definitions of...

BioNetFit: a fitting tool compatible with BioNetGen, NFsim and distributed computing environments.

PubMed

Thomas, Brandon R; Chylek, Lily A; Colvin, Joshua; Sirimulla, Suman; Clayton, Andrew H A; Hlavacek, William S; Posner, Richard G

2016-03-01

Rule-based models are analyzed with specialized simulators, such as those provided by the BioNetGen and NFsim open-source software packages. Here, we present BioNetFit, a general-purpose fitting tool that is compatible with BioNetGen and NFsim. BioNetFit is designed to take advantage of distributed computing resources. This feature facilitates fitting (i.e. optimization of parameter values for consistency with data) when simulations are computationally expensive. BioNetFit can be used on stand-alone Mac, Windows/Cygwin, and Linux platforms and on Linux-based clusters running SLURM, Torque/PBS, or SGE. The BioNetFit source code (Perl) is freely available (http://bionetfit.nau.edu). Supplementary data are available at Bioinformatics online. bionetgen.help@gmail.com. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Reduced order surrogate modelling (ROSM) of high dimensional deterministic simulations

NASA Astrophysics Data System (ADS)

Mitry, Mina

Often, computationally expensive engineering simulations can prohibit the engineering design process. As a result, designers may turn to a less computationally demanding approximate, or surrogate, model to facilitate their design process. However, owing to the the curse of dimensionality, classical surrogate models become too computationally expensive for high dimensional data. To address this limitation of classical methods, we develop linear and non-linear Reduced Order Surrogate Modelling (ROSM) techniques. Two algorithms are presented, which are based on a combination of linear/kernel principal component analysis and radial basis functions. These algorithms are applied to subsonic and transonic aerodynamic data, as well as a model for a chemical spill in a channel. The results of this thesis show that ROSM can provide a significant computational benefit over classical surrogate modelling, sometimes at the expense of a minor loss in accuracy.

47 CFR 32.6112 - Motor vehicle expense.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Motor vehicle expense. 32.6112 Section 32.6112 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES UNIFORM SYSTEM OF ACCOUNTS.../or to other Plant Specific Operations Expense accounts. These amounts shall be computed on the basis...

47 CFR 32.6121 - Land and building expense.

Code of Federal Regulations, 2013 CFR

2013-10-01

... operate the telecommunications network shall be charged to Account 6531, Power Expense, and the cost of separately metered electricity used for operating specific types of equipment, such as computers, shall be... SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6121 Land and...

47 CFR 32.6121 - Land and building expense.

Code of Federal Regulations, 2012 CFR

2012-10-01

... operate the telecommunications network shall be charged to Account 6531, Power Expense, and the cost of separately metered electricity used for operating specific types of equipment, such as computers, shall be... SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6121 Land and...

47 CFR 32.6121 - Land and building expense.

Code of Federal Regulations, 2011 CFR

2011-10-01

... operate the telecommunications network shall be charged to Account 6531, Power Expense, and the cost of separately metered electricity used for operating specific types of equipment, such as computers, shall be... SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6121 Land and...

47 CFR 32.6121 - Land and building expense.

Code of Federal Regulations, 2014 CFR

2014-10-01

... operate the telecommunications network shall be charged to Account 6531, Power Expense, and the cost of separately metered electricity used for operating specific types of equipment, such as computers, shall be... SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6121 Land and...

47 CFR 32.6121 - Land and building expense.

Code of Federal Regulations, 2010 CFR

2010-10-01

... operate the telecommunications network shall be charged to Account 6531, Power Expense, and the cost of separately metered electricity used for operating specific types of equipment, such as computers, shall be... SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6121 Land and...

Producing picture-perfect posters.

PubMed

Bach, D B; Vellet, A D; Karlik, S J; Downey, D B; Levin, M F; Munk, P L

1993-06-01

Scientific posters form an integral part of many radiology meetings. They provide the opportunity for interested parties to read the material at an individualized pace, to study the images in detail, and to return to the exhibit numerous times. Although the content of the poster is undoubtedly its most important component, the visual presentation of the material can enhance or detract from the clarity of the message. With the wide availability of sophisticated computer programs for desktop publishing (DTP), one can now create the poster on a computer monitor with full control of the form as well as the content. This process will result in a professional-appearing poster, yet still allow the author the opportunity to make innumerable revisions, as the poster is visualized in detail on the computer monitor before printing. Furthermore, this process is less expensive than the traditional method of typesetting individual sections separately and mounting them on cardboard for display. The purpose of this article is to present our approach to poster production using commercially available DTP computer programs.

7 CFR 1484.53 - What are the requirements for documenting and reporting contributions?

Code of Federal Regulations, 2010 CFR

2010-01-01

... contribution must be documented by the Cooperator, showing the method of computing non-cash contributions, salaries, and travel expenses. (b) Each Cooperator must keep records of the methods used to compute the value of non-cash contributions, and (1) Copies of invoices or receipts for expenses paid by the U.S...

A computer-based training system combining virtual reality and multimedia

NASA Technical Reports Server (NTRS)

Stansfield, Sharon A.

1993-01-01

Training new users of complex machines is often an expensive and time-consuming process. This is particularly true for special purpose systems, such as those frequently encountered in DOE applications. This paper presents a computer-based training system intended as a partial solution to this problem. The system extends the basic virtual reality (VR) training paradigm by adding a multimedia component which may be accessed during interaction with the virtual environment. The 3D model used to create the virtual reality is also used as the primary navigation tool through the associated multimedia. This method exploits the natural mapping between a virtual world and the real world that it represents to provide a more intuitive way for the student to interact with all forms of information about the system.

26 CFR 1.556-2 - Adjustments to taxable income.

Code of Federal Regulations, 2010 CFR

2010-04-01

... of deductions for trade or business expenses and depreciation which are allocable to the operation... computed without the deduction of the amount disallowed under section 556(b)(5), relating to expenses and... disallowed under section 556(b)(5), relating to expenses and depreciation applicable to property of the...

15 CFR 18.1 - Purpose of these rules.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 18.1 Commerce and Foreign Trade Office of the Secretary of Commerce ATTORNEY'S FEES AND OTHER EXPENSES General Provisions § 18.1 Purpose of these rules. The Equal Access to Justice Act, 5 U.S.C. 504 (called “the Act” in this part), provides for the award of attorney fees and other expenses to eligible...

Analysis Software

NASA Technical Reports Server (NTRS)

1994-01-01

General Purpose Boundary Element Solution Technology (GPBEST) software employs the boundary element method of mechanical engineering analysis, as opposed to finite element. It is, according to one of its developers, 10 times faster in data preparation and more accurate than other methods. Its use results in less expensive products because the time between design and manufacturing is shortened. A commercial derivative of a NASA-developed computer code, it is marketed by Best Corporation to solve problems in stress analysis, heat transfer, fluid analysis and yielding and cracking of solids. Other applications include designing tractor and auto parts, household appliances and acoustic analysis.

Simplex-stochastic collocation method with improved scalability

NASA Astrophysics Data System (ADS)

Edeling, W. N.; Dwight, R. P.; Cinnella, P.

2016-04-01

The Simplex-Stochastic Collocation (SSC) method is a robust tool used to propagate uncertain input distributions through a computer code. However, it becomes prohibitively expensive for problems with dimensions higher than 5. The main purpose of this paper is to identify bottlenecks, and to improve upon this bad scalability. In order to do so, we propose an alternative interpolation stencil technique based upon the Set-Covering problem, and we integrate the SSC method in the High-Dimensional Model-Reduction framework. In addition, we address the issue of ill-conditioned sample matrices, and we present an analytical map to facilitate uniformly-distributed simplex sampling.

Application of M-JPEG compression hardware to dynamic stimulus production.

PubMed

Mulligan, J B

1997-01-01

Inexpensive circuit boards have appeared on the market which transform a normal micro-computer's disk drive into a video disk capable of playing extended video sequences in real time. This technology enables the performance of experiments which were previously impossible, or at least prohibitively expensive. The new technology achieves this capability using special-purpose hardware to compress and decompress individual video frames, enabling a video stream to be transferred over relatively low-bandwidth disk interfaces. This paper will describe the use of such devices for visual psychophysics and present the technical issues that must be considered when evaluating individual products.

Multidisciplinary optimization of an HSCT wing using a response surface methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giunta, A.A.; Grossman, B.; Mason, W.H.

1994-12-31

Aerospace vehicle design is traditionally divided into three phases: conceptual, preliminary, and detailed. Each of these design phases entails a particular level of accuracy and computational expense. While there are several computer programs which perform inexpensive conceptual-level aircraft multidisciplinary design optimization (MDO), aircraft MDO remains prohibitively expensive using preliminary- and detailed-level analysis tools. This occurs due to the expense of computational analyses and because gradient-based optimization requires the analysis of hundreds or thousands of aircraft configurations to estimate design sensitivity information. A further hindrance to aircraft MDO is the problem of numerical noise which occurs frequently in engineering computations. Computermore » models produce numerical noise as a result of the incomplete convergence of iterative processes, round-off errors, and modeling errors. Such numerical noise is typically manifested as a high frequency, low amplitude variation in the results obtained from the computer models. Optimization attempted using noisy computer models may result in the erroneous calculation of design sensitivities and may slow or prevent convergence to an optimal design.« less

26 CFR 1.163-8T - Allocation of interest expense among expenditures (temporary).

Code of Federal Regulations, 2011 CFR

2011-04-01

... applying sections 469 (the “passive loss limitation”) and 163 (d) and (h) (the “nonbusiness interest... expense is allocated for the purposes of applying the passive loss limitation and nonbusiness interest... paragraph (m) of this section (relating to limitations on interest expense other than the passive loss and...

Simulating Human Cognition in the Domain of Air Traffic Control

NASA Technical Reports Server (NTRS)

Freed, Michael; Johnston, James C.; Null, Cynthia H. (Technical Monitor)

1995-01-01

Experiments intended to assess performance in human-machine interactions are often prohibitively expensive, unethical or otherwise impractical to run. Approximations of experimental results can be obtained, in principle, by simulating the behavior of subjects using computer models of human mental behavior. Computer simulation technology has been developed for this purpose. Our goal is to produce a cognitive model suitable to guide the simulation machinery and enable it to closely approximate a human subject's performance in experimental conditions. The described model is designed to simulate a variety of cognitive behaviors involved in routine air traffic control. As the model is elaborated, our ability to predict the effects of novel circumstances on controller error rates and other performance characteristics should increase. This will enable the system to project the impact of proposed changes to air traffic control procedures and equipment on controller performance.

26 CFR 1.274-4 - Disallowance of certain foreign travel expenses.

Code of Federal Regulations, 2010 CFR

2010-04-01

... paragraph (d) of this section) constitutes 25 percent or more of the total time on such travel. (c) Travel... percent or more of travel time under paragraph (d) of this section and for purposes of allocating expenses... percent or more of travel time—(1) In general. This section does not apply to any expense of travel...

26 CFR 1.274-4 - Disallowance of certain foreign travel expenses.

Code of Federal Regulations, 2011 CFR

2011-04-01

... paragraph (d) of this section) constitutes 25 percent or more of the total time on such travel. (c) Travel... percent or more of travel time under paragraph (d) of this section and for purposes of allocating expenses... percent or more of travel time—(1) In general. This section does not apply to any expense of travel...

26 CFR 1.274-4 - Disallowance of certain foreign travel expenses.

Code of Federal Regulations, 2014 CFR

2014-04-01

... paragraph (d) of this section) constitutes 25 percent or more of the total time on such travel. (c) Travel... percent or more of travel time under paragraph (d) of this section and for purposes of allocating expenses... percent or more of travel time—(1) In general. This section does not apply to any expense of travel...

26 CFR 1.274-4 - Disallowance of certain foreign travel expenses.

Code of Federal Regulations, 2013 CFR

2013-04-01

... paragraph (d) of this section) constitutes 25 percent or more of the total time on such travel. (c) Travel... percent or more of travel time under paragraph (d) of this section and for purposes of allocating expenses... percent or more of travel time—(1) In general. This section does not apply to any expense of travel...

26 CFR 1.274-4 - Disallowance of certain foreign travel expenses.

Code of Federal Regulations, 2012 CFR

2012-04-01

... paragraph (d) of this section) constitutes 25 percent or more of the total time on such travel. (c) Travel... percent or more of travel time under paragraph (d) of this section and for purposes of allocating expenses... percent or more of travel time—(1) In general. This section does not apply to any expense of travel...

Robust, Optimal Water Infrastructure Planning Under Deep Uncertainty Using Metamodels

NASA Astrophysics Data System (ADS)

Maier, H. R.; Beh, E. H. Y.; Zheng, F.; Dandy, G. C.; Kapelan, Z.

2015-12-01

Optimal long-term planning plays an important role in many water infrastructure problems. However, this task is complicated by deep uncertainty about future conditions, such as the impact of population dynamics and climate change. One way to deal with this uncertainty is by means of robustness, which aims to ensure that water infrastructure performs adequately under a range of plausible future conditions. However, as robustness calculations require computationally expensive system models to be run for a large number of scenarios, it is generally computationally intractable to include robustness as an objective in the development of optimal long-term infrastructure plans. In order to overcome this shortcoming, an approach is developed that uses metamodels instead of computationally expensive simulation models in robustness calculations. The approach is demonstrated for the optimal sequencing of water supply augmentation options for the southern portion of the water supply for Adelaide, South Australia. A 100-year planning horizon is subdivided into ten equal decision stages for the purpose of sequencing various water supply augmentation options, including desalination, stormwater harvesting and household rainwater tanks. The objectives include the minimization of average present value of supply augmentation costs, the minimization of average present value of greenhouse gas emissions and the maximization of supply robustness. The uncertain variables are rainfall, per capita water consumption and population. Decision variables are the implementation stages of the different water supply augmentation options. Artificial neural networks are used as metamodels to enable all objectives to be calculated in a computationally efficient manner at each of the decision stages. The results illustrate the importance of identifying optimal staged solutions to ensure robustness and sustainability of water supply into an uncertain long-term future.

DOE Office of Scientific and Technical Information (OSTI.GOV)

I. W. Ginsberg

Multiresolutional decompositions known as spectral fingerprints are often used to extract spectral features from multispectral/hyperspectral data. In this study, the authors investigate the use of wavelet-based algorithms for generating spectral fingerprints. The wavelet-based algorithms are compared to the currently used method, traditional convolution with first-derivative Gaussian filters. The comparison analyses consists of two parts: (a) the computational expense of the new method is compared with the computational costs of the current method and (b) the outputs of the wavelet-based methods are compared with those of the current method to determine any practical differences in the resulting spectral fingerprints. The resultsmore » show that the wavelet-based algorithms can greatly reduce the computational expense of generating spectral fingerprints, while practically no differences exist in the resulting fingerprints. The analysis is conducted on a database of hyperspectral signatures, namely, Hyperspectral Digital Image Collection Experiment (HYDICE) signatures. The reduction in computational expense is by a factor of about 30, and the average Euclidean distance between resulting fingerprints is on the order of 0.02.« less

Metamodels for Computer-Based Engineering Design: Survey and Recommendations

NASA Technical Reports Server (NTRS)

Simpson, Timothy W.; Peplinski, Jesse; Koch, Patrick N.; Allen, Janet K.

1997-01-01

The use of statistical techniques to build approximations of expensive computer analysis codes pervades much of todays engineering design. These statistical approximations, or metamodels, are used to replace the actual expensive computer analyses, facilitating multidisciplinary, multiobjective optimization and concept exploration. In this paper we review several of these techniques including design of experiments, response surface methodology, Taguchi methods, neural networks, inductive learning, and kriging. We survey their existing application in engineering design and then address the dangers of applying traditional statistical techniques to approximate deterministic computer analysis codes. We conclude with recommendations for the appropriate use of statistical approximation techniques in given situations and how common pitfalls can be avoided.

Privacy-preserving search for chemical compound databases.

PubMed

Shimizu, Kana; Nuida, Koji; Arai, Hiromi; Mitsunari, Shigeo; Attrapadung, Nuttapong; Hamada, Michiaki; Tsuda, Koji; Hirokawa, Takatsugu; Sakuma, Jun; Hanaoka, Goichiro; Asai, Kiyoshi

2015-01-01

Searching for similar compounds in a database is the most important process for in-silico drug screening. Since a query compound is an important starting point for the new drug, a query holder, who is afraid of the query being monitored by the database server, usually downloads all the records in the database and uses them in a closed network. However, a serious dilemma arises when the database holder also wants to output no information except for the search results, and such a dilemma prevents the use of many important data resources. In order to overcome this dilemma, we developed a novel cryptographic protocol that enables database searching while keeping both the query holder's privacy and database holder's privacy. Generally, the application of cryptographic techniques to practical problems is difficult because versatile techniques are computationally expensive while computationally inexpensive techniques can perform only trivial computation tasks. In this study, our protocol is successfully built only from an additive-homomorphic cryptosystem, which allows only addition performed on encrypted values but is computationally efficient compared with versatile techniques such as general purpose multi-party computation. In an experiment searching ChEMBL, which consists of more than 1,200,000 compounds, the proposed method was 36,900 times faster in CPU time and 12,000 times as efficient in communication size compared with general purpose multi-party computation. We proposed a novel privacy-preserving protocol for searching chemical compound databases. The proposed method, easily scaling for large-scale databases, may help to accelerate drug discovery research by making full use of unused but valuable data that includes sensitive information.

A simple and inexpensive method of preoperative computer imaging for rhinoplasty.

PubMed

Ewart, Christopher J; Leonard, Christopher J; Harper, J Garrett; Yu, Jack

2006-01-01

GOALS/PURPOSE: Despite concerns of legal liability, preoperative computer imaging has become a popular tool for the plastic surgeon. The ability to project possible surgical outcomes can facilitate communication between the patient and surgeon. It can be an effective tool in the education and training of residents. Unfortunately, these imaging programs are expensive and have a steep learning curve. The purpose of this paper is to present a relatively inexpensive method of preoperative computer imaging with a reasonable learning curve. The price of currently available imaging programs was acquired through an online search, and inquiries were made to the software distributors. Their prices were compared to Adobe PhotoShop, which has special filters called "liquify" and "photocopy." It was used in the preoperative computer planning of 2 patients who presented for rhinoplasty at our institution. Projected images were created based on harmonious discussions between the patient and physician. Importantly, these images were presented to the patient as potential results, with no guarantees as to actual outcomes. Adobe PhotoShop can be purchased for 900-5800 dollars less than the leading computer imaging software for cosmetic rhinoplasty. Effective projected images were created using the "liquify" and "photocopy" filters in PhotoShop. Both patients had surgical planning and operations based on these images. They were satisfied with the results. Preoperative computer imaging can be a very effective tool for the plastic surgeon by providing improved physician-patient communication, increased patient confidence, and enhanced surgical planning. Adobe PhotoShop is a relatively inexpensive program that can provide these benefits using only 1 or 2 features.

Privacy-preserving search for chemical compound databases

PubMed Central

2015-01-01

Background Searching for similar compounds in a database is the most important process for in-silico drug screening. Since a query compound is an important starting point for the new drug, a query holder, who is afraid of the query being monitored by the database server, usually downloads all the records in the database and uses them in a closed network. However, a serious dilemma arises when the database holder also wants to output no information except for the search results, and such a dilemma prevents the use of many important data resources. Results In order to overcome this dilemma, we developed a novel cryptographic protocol that enables database searching while keeping both the query holder's privacy and database holder's privacy. Generally, the application of cryptographic techniques to practical problems is difficult because versatile techniques are computationally expensive while computationally inexpensive techniques can perform only trivial computation tasks. In this study, our protocol is successfully built only from an additive-homomorphic cryptosystem, which allows only addition performed on encrypted values but is computationally efficient compared with versatile techniques such as general purpose multi-party computation. In an experiment searching ChEMBL, which consists of more than 1,200,000 compounds, the proposed method was 36,900 times faster in CPU time and 12,000 times as efficient in communication size compared with general purpose multi-party computation. Conclusion We proposed a novel privacy-preserving protocol for searching chemical compound databases. The proposed method, easily scaling for large-scale databases, may help to accelerate drug discovery research by making full use of unused but valuable data that includes sensitive information. PMID:26678650

Transport of Space Environment Electrons: A Simplified Rapid-Analysis Computational Procedure

NASA Technical Reports Server (NTRS)

Nealy, John E.; Anderson, Brooke M.; Cucinotta, Francis A.; Wilson, John W.; Katz, Robert; Chang, C. K.

2002-01-01

A computational procedure for describing transport of electrons in condensed media has been formulated for application to effects and exposures from spectral distributions typical of electrons trapped in planetary magnetic fields. The procedure is based on earlier parameterizations established from numerous electron beam experiments. New parameterizations have been derived that logically extend the domain of application to low molecular weight (high hydrogen content) materials and higher energies (approximately 50 MeV). The production and transport of high energy photons (bremsstrahlung) generated in the electron transport processes have also been modeled using tabulated values of photon production cross sections. A primary purpose for developing the procedure has been to provide a means for rapidly performing numerous repetitive calculations essential for electron radiation exposure assessments for complex space structures. Several favorable comparisons have been made with previous calculations for typical space environment spectra, which have indicated that accuracy has not been substantially compromised at the expense of computational speed.

GPU Accelerated Vector Median Filter

NASA Technical Reports Server (NTRS)

Aras, Rifat; Shen, Yuzhong

2011-01-01

Noise reduction is an important step for most image processing tasks. For three channel color images, a widely used technique is vector median filter in which color values of pixels are treated as 3-component vectors. Vector median filters are computationally expensive; for a window size of n x n, each of the n(sup 2) vectors has to be compared with other n(sup 2) - 1 vectors in distances. General purpose computation on graphics processing units (GPUs) is the paradigm of utilizing high-performance many-core GPU architectures for computation tasks that are normally handled by CPUs. In this work. NVIDIA's Compute Unified Device Architecture (CUDA) paradigm is used to accelerate vector median filtering. which has to the best of our knowledge never been done before. The performance of GPU accelerated vector median filter is compared to that of the CPU and MPI-based versions for different image and window sizes, Initial findings of the study showed 100x improvement of performance of vector median filter implementation on GPUs over CPU implementations and further speed-up is expected after more extensive optimizations of the GPU algorithm .

Using quantum chemistry muscle to flex massive systems: How to respond to something perturbing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bertoni, Colleen

Computational chemistry uses the theoretical advances of quantum mechanics and the algorithmic and hardware advances of computer science to give insight into chemical problems. It is currently possible to do highly accurate quantum chemistry calculations, but the most accurate methods are very computationally expensive. Thus it is only feasible to do highly accurate calculations on small molecules, since typically more computationally efficient methods are also less accurate. The overall goal of my dissertation work has been to try to decrease the computational expense of calculations without decreasing the accuracy. In particular, my dissertation work focuses on fragmentation methods, intermolecular interactionsmore » methods, analytic gradients, and taking advantage of new hardware.« less

Software for Acoustic Rendering

NASA Technical Reports Server (NTRS)

Miller, Joel D.

2003-01-01

SLAB is a software system that can be run on a personal computer to simulate an acoustic environment in real time. SLAB was developed to enable computational experimentation in which one can exert low-level control over a variety of signal-processing parameters, related to spatialization, for conducting psychoacoustic studies. Among the parameters that can be manipulated are the number and position of reflections, the fidelity (that is, the number of taps in finite-impulse-response filters), the system latency, and the update rate of the filters. Another goal in the development of SLAB was to provide an inexpensive means of dynamic synthesis of virtual audio over headphones, without need for special-purpose signal-processing hardware. SLAB has a modular, object-oriented design that affords the flexibility and extensibility needed to accommodate a variety of computational experiments and signal-flow structures. SLAB s spatial renderer has a fixed signal-flow architecture corresponding to a set of parallel signal paths from each source to a listener. This fixed architecture can be regarded as a compromise that optimizes efficiency at the expense of complete flexibility. Such a compromise is necessary, given the design goal of enabling computational psychoacoustic experimentation on inexpensive personal computers.

A Lumped Computational Model for Sodium Sulfur Battery Analysis

NASA Astrophysics Data System (ADS)

Wu, Fan

Due to the cost of materials and time consuming testing procedures, development of new batteries is a slow and expensive practice. The purpose of this study is to develop a computational model and assess the capabilities of such a model designed to aid in the design process and control of sodium sulfur batteries. To this end, a transient lumped computational model derived from an integral analysis of the transport of species, energy and charge throughout the battery has been developed. The computation processes are coupled with the use of Faraday's law, and solutions for the species concentrations, electrical potential and current are produced in a time marching fashion. Properties required for solving the governing equations are calculated and updated as a function of time based on the composition of each control volume. The proposed model is validated against multi- dimensional simulations and experimental results from literatures, and simulation results using the proposed model is presented and analyzed. The computational model and electrochemical model used to solve the equations for the lumped model are compared with similar ones found in the literature. The results obtained from the current model compare favorably with those from experiments and other models.

Directional view interpolation for compensation of sparse angular sampling in cone-beam CT.

PubMed

Bertram, Matthias; Wiegert, Jens; Schafer, Dirk; Aach, Til; Rose, Georg

2009-07-01

In flat detector cone-beam computed tomography and related applications, sparse angular sampling frequently leads to characteristic streak artifacts. To overcome this problem, it has been suggested to generate additional views by means of interpolation. The practicality of this approach is investigated in combination with a dedicated method for angular interpolation of 3-D sinogram data. For this purpose, a novel dedicated shape-driven directional interpolation algorithm based on a structure tensor approach is developed. Quantitative evaluation shows that this method clearly outperforms conventional scene-based interpolation schemes. Furthermore, the image quality trade-offs associated with the use of interpolated intermediate views are systematically evaluated for simulated and clinical cone-beam computed tomography data sets of the human head. It is found that utilization of directionally interpolated views significantly reduces streak artifacts and noise, at the expense of small introduced image blur.

Identifying the impact of G-quadruplexes on Affymetrix 3' arrays using cloud computing.

PubMed

Memon, Farhat N; Owen, Anne M; Sanchez-Graillet, Olivia; Upton, Graham J G; Harrison, Andrew P

2010-01-15

A tetramer quadruplex structure is formed by four parallel strands of DNA/ RNA containing runs of guanine. These quadruplexes are able to form because guanine can Hoogsteen hydrogen bond to other guanines, and a tetrad of guanines can form a stable arrangement. Recently we have discovered that probes on Affymetrix GeneChips that contain runs of guanine do not measure gene expression reliably. We associate this finding with the likelihood that quadruplexes are forming on the surface of GeneChips. In order to cope with the rapidly expanding size of GeneChip array datasets in the public domain, we are exploring the use of cloud computing to replicate our experiments on 3' arrays to look at the effect of the location of G-spots (runs of guanines). Cloud computing is a recently introduced high-performance solution that takes advantage of the computational infrastructure of large organisations such as Amazon and Google. We expect that cloud computing will become widely adopted because it enables bioinformaticians to avoid capital expenditure on expensive computing resources and to only pay a cloud computing provider for what is used. Moreover, as well as financial efficiency, cloud computing is an ecologically-friendly technology, it enables efficient data-sharing and we expect it to be faster for development purposes. Here we propose the advantageous use of cloud computing to perform a large data-mining analysis of public domain 3' arrays.

76 FR 9349 - Jim Woodruff Project

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-17

... month. Southeastern would compute its purchased power obligation for each delivery point monthly... rates to include a pass-through of purchased power expenses. The capacity and energy charges to preference customers can be reduced because purchased power expenses will be recovered in a separate, pass...

14 CFR 399.44 - Treatment of deferred Federal income taxes for rate purposes.

Code of Federal Regulations, 2010 CFR

2010-01-01

...-cargo expenses 2 269 269 269 Belly offset 3 952 153 1,105 1,153 Nonscheduled 4 141 46 187 205 Transport... expenses 2 282 282 282 Belly offset 3 869 152 1,021 1,065 Nonscheduled 4 193 53 246 256 Transport related 5... Nonscheduled 4 220 35 225 266 Transport related 5 427 111 538 554 Passenger operating expense 10,112 1,348 11...

7 CFR 1822.265 - Loan purposes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... the payment of necessary engineering fees, legal fees, and closing costs. (c) For the payment of actual cash cost of incidental administrative expenses such as postage, telephone, advertising, and temporary secretarial help, if funds to pay these expenses are not otherwise available. The estimated cost...

7 CFR 1767.28 - Customer accounts expenses.

Code of Federal Regulations, 2010 CFR

2010-01-01

... performed by meter readers and the work represents a minor activity incidental to regular meter reading... funds or to insurance companies for pension purposes. 2. Group and life insurance premiums (credit... used, and expenses incurred in work on customer applications, contracts, orders, credit investigations...

18 CFR 367.9160 - Account 916, Miscellaneous sales expenses.

Code of Federal Regulations, 2010 CFR

2010-04-01

... work not assigned to specific functions. (2) Special analysis of customer accounts and other statistical work for sales purposes not a part of the regular customer accounting and billing routine. (3... those chargeable to account 913, Advertising expenses (§ 367.9130). ...

SOP: parallel surrogate global optimization with Pareto center selection for computationally expensive single objective problems

DOE PAGES

Krityakierne, Tipaluck; Akhtar, Taimoor; Shoemaker, Christine A.

2016-02-02

This paper presents a parallel surrogate-based global optimization method for computationally expensive objective functions that is more effective for larger numbers of processors. To reach this goal, we integrated concepts from multi-objective optimization and tabu search into, single objective, surrogate optimization. Our proposed derivative-free algorithm, called SOP, uses non-dominated sorting of points for which the expensive function has been previously evaluated. The two objectives are the expensive function value of the point and the minimum distance of the point to previously evaluated points. Based on the results of non-dominated sorting, P points from the sorted fronts are selected as centersmore » from which many candidate points are generated by random perturbations. Based on surrogate approximation, the best candidate point is subsequently selected for expensive evaluation for each of the P centers, with simultaneous computation on P processors. Centers that previously did not generate good solutions are tabu with a given tenure. We show almost sure convergence of this algorithm under some conditions. The performance of SOP is compared with two RBF based methods. The test results show that SOP is an efficient method that can reduce time required to find a good near optimal solution. In a number of cases the efficiency of SOP is so good that SOP with 8 processors found an accurate answer in less wall-clock time than the other algorithms did with 32 processors.« less

Applying ``intelligent`` materials for materials education: The Labless Lab{trademark}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrade, J.D.; Scheer, R.

1994-12-31

A very large number of science and engineering courses taught in colleges and universities today do not involve laboratories. Although good instructors incorporate class demonstrations, hands on homework, and various teaching aids, including computer simulations, the fact is that students in such courses often accept key concepts and experimental results without discovering them for themselves. The only partial solution to this problem has been increasing use of class demonstrations and computer simulations. The authors feel strongly that many complex concepts can be observed and assimilated through experimentation with properly designed materials. They propose the development of materials and specimens designedmore » specifically for education purposes. Intelligent and communicative materials are ideal for this purpose. Specimens which respond in an observable fashion to new environments and situations provided by the students/experimenter provide a far more effective materials science and engineering experience than readouts and data generated by complex and expensive machines, particularly in an introductory course. Modern materials can be designed to literally communicate with the observer. The authors embarked on a project to develop a series of Labless Labs{trademark} utilizing various degrees and levels of intelligence in materials. It is expected that such Labless Labs{trademark} would be complementary to textbooks and computer simulations and to be used to provide a reality for students in courses and other learning situations where access to a laboratory is non-existent or limited.« less

A Case against Computer Symbolic Manipulation in School Mathematics Today.

ERIC Educational Resources Information Center

Waits, Bert K.; Demana, Franklin

1992-01-01

Presented are two reasons discouraging computer symbol manipulation systems use in school mathematics at present: cost for computer laboratories or expensive pocket computers; and impracticality of exact solution representations. Although development with this technology in mathematics education advances, graphing calculators are recommended to…

Hospital Supply Expenses: An Important Ingredient in Health Services Research.

PubMed

Abdulsalam, Yousef; Schneller, Eugene

2017-07-01

The purpose of this article is to shed light on hospital supply expenses, which form the second largest expense category after payroll and hold more promise for improving cost-efficiency compared to payroll. However, limited research has rigorously scrutinized this cost category, and it is rarely given specific consideration across cost-focused studies in health services publications. After reviewing previously cited estimates, we examine and independently validate supply expense data (collected by the American Hospital Association) for over 3,500 U.S. hospitals. We find supply expenses to make up 15% of total hospital expenses, on average, but as high as 30% or 40% in hospitals with a high case-mix index, such as surgery-intensive hospitals. Future research can use supply expense data to better understand hospital strategies that aim to manage costs, such as systemization, physician-hospital arrangements, and value-based purchasing.

Preoperative localization strategies for primary hyperparathyroidism: an economic analysis.

PubMed

Lubitz, Carrie C; Stephen, Antonia E; Hodin, Richard A; Pandharipande, Pari

2012-12-01

Strategies for localizing parathyroid pathology preoperatively vary in cost and accuracy. Our purpose was to compute and compare comprehensive costs associated with common localization strategies. A decision-analytic model was developed to evaluate comprehensive, short-term costs of parathyroid localization strategies for patients with primary hyperparathyroidism. Eight strategies were compared. Probabilities of accurate localization were extracted from the literature, and costs associated with each strategy were based on 2011 Medicare reimbursement schedules. Differential cost considerations included outpatient versus inpatient surgeries, operative time, and costs of imaging. Sensitivity analyses were performed to determine effects of variability in key model parameters upon model results. Ultrasound (US) followed by 4D-CT was the least expensive strategy ($5,901), followed by US alone ($6,028), and 4D-CT alone ($6,110). Strategies including sestamibi (SM) were more expensive, with associated expenditures of up to $6,329 for contemporaneous US and SM. Four-gland, bilateral neck exploration (BNE) was the most expensive strategy ($6,824). Differences in cost were dependent upon differences in the sensitivity of each strategy for detecting single-gland disease, which determined the proportion of patients able to undergo outpatient minimally invasive parathyroidectomy. In sensitivity analysis, US alone was preferred over US followed by 4D-CT only when both the sensitivity of US alone for detecting an adenoma was ≥ 94 %, and the sensitivity of 4D-CT following negative US was ≤ 39 %. 4D-CT alone was the least costly strategy when US sensitivity was ≤ 31 %. Among commonly used strategies for preoperative localization of parathyroid pathology, US followed by selective 4D-CT is the least expensive.

18 CFR 367.4 - Numbering system.

Code of Federal Regulations, 2010 CFR

2010-04-01

... expenses. (8) 800-894, Gas operating expenses. (9) 900-949, Customer accounts, customer service and... NATURAL GAS ACT UNIFORM SYSTEM OF ACCOUNTS FOR CENTRALIZED SERVICE COMPANIES SUBJECT TO THE PROVISIONS OF... be considered as parts of the titles. Each service company, however, may adopt for its own purposes a...

Automatic segmentation of relevant structures in DCE MR mammograms

NASA Astrophysics Data System (ADS)

Koenig, Matthias; Laue, Hendrik; Boehler, Tobias; Peitgen, Heinz-Otto

2007-03-01

The automatic segmentation of relevant structures such as skin edge, chest wall, or nipple in dynamic contrast enhanced MR imaging (DCE MRI) of the breast provides additional information for computer aided diagnosis (CAD) systems. Automatic reporting using BI-RADS criteria benefits of information about location of those structures. Lesion positions can be automatically described relatively to such reference structures for reporting purposes. Furthermore, this information can assist data reduction for computation expensive preprocessing such as registration, or for visualization of only the segments of current interest. In this paper, a novel automatic method for determining the air-breast boundary resp. skin edge, for approximation of the chest wall, and locating of the nipples is presented. The method consists of several steps which are built on top of each other. Automatic threshold computation leads to the air-breast boundary which is then analyzed to determine the location of the nipple. Finally, results of both steps are starting point for approximation of the chest wall. The proposed process was evaluated on a large data set of DCE MRI recorded by T1 sequences and yielded reasonable results in all cases.

The Effect of Computer Automation on Institutional Review Board (IRB) Office Efficiency

ERIC Educational Resources Information Center

Oder, Karl; Pittman, Stephanie

2015-01-01

Companies purchase computer systems to make their processes more efficient through automation. Some academic medical centers (AMC) have purchased computer systems for their institutional review boards (IRB) to increase efficiency and compliance with regulations. IRB computer systems are expensive to purchase, deploy, and maintain. An AMC should…

14 CFR Section 14 - Objective Classification-Nonoperating Income and Expense

Code of Federal Regulations, 2010 CFR

2010-01-01

.... [ER-1401, 50 FR 245, Jan. 3, 1985] 81Interest on Long-term Debt and Capital Leases. (a) Record here... sheet classification purposes. 81.2Interest expense—capital leases. Record here for all capitalized... reasonably identifiable. (c) Amortization expense attributable to capital leases recorded in balance sheet...

29 CFR 553.106 - Payment of expenses, benefits, or fees.

Code of Federal Regulations, 2014 CFR

2014-07-01

... payment for expenses without being deemed an employee for purposes of the FLSA. A school guard does not become an employee because he or she receives a uniform allowance, or reimbursement for reasonable... service. (A uniform allowance must be reasonably limited to relieving the volunteer of the cost of...

29 CFR 553.106 - Payment of expenses, benefits, or fees.

Code of Federal Regulations, 2013 CFR

2013-07-01

... payment for expenses without being deemed an employee for purposes of the FLSA. A school guard does not become an employee because he or she receives a uniform allowance, or reimbursement for reasonable... service. (A uniform allowance must be reasonably limited to relieving the volunteer of the cost of...

29 CFR 553.106 - Payment of expenses, benefits, or fees.

Code of Federal Regulations, 2012 CFR

2012-07-01

... payment for expenses without being deemed an employee for purposes of the FLSA. A school guard does not become an employee because he or she receives a uniform allowance, or reimbursement for reasonable... service. (A uniform allowance must be reasonably limited to relieving the volunteer of the cost of...

14 CFR Section 14 - Objective Classification-Nonoperating Income and Expense

Code of Federal Regulations, 2011 CFR

2011-01-01

.... [ER-1401, 50 FR 245, Jan. 3, 1985] 81Interest on Long-term Debt and Capital Leases. (a) Record here... sheet classification purposes. 81.2Interest expense—capital leases. Record here for all capitalized... reasonably identifiable. (c) Amortization expense attributable to capital leases recorded in balance sheet...

23 CFR 140.801 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Purpose. 140.801 Section 140.801 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PAYMENT PROCEDURES REIMBURSEMENT State Highway Agency Audit Expense § 140.801 Purpose. To establish the reimbursement criteria for Federal participation in...

23 CFR 140.801 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Purpose. 140.801 Section 140.801 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PAYMENT PROCEDURES REIMBURSEMENT State Highway Agency Audit Expense § 140.801 Purpose. To establish the reimbursement criteria for Federal participation in...

23 CFR 140.801 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Purpose. 140.801 Section 140.801 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PAYMENT PROCEDURES REIMBURSEMENT State Highway Agency Audit Expense § 140.801 Purpose. To establish the reimbursement criteria for Federal participation in...

23 CFR 140.801 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Purpose. 140.801 Section 140.801 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PAYMENT PROCEDURES REIMBURSEMENT State Highway Agency Audit Expense § 140.801 Purpose. To establish the reimbursement criteria for Federal participation in...

OMPC: an Open-Source MATLAB®-to-Python Compiler

PubMed Central

Jurica, Peter; van Leeuwen, Cees

2008-01-01

Free access to scientific information facilitates scientific progress. Open-access scientific journals are a first step in this direction; a further step is to make auxiliary and supplementary materials that accompany scientific publications, such as methodological procedures and data-analysis tools, open and accessible to the scientific community. To this purpose it is instrumental to establish a software base, which will grow toward a comprehensive free and open-source language of technical and scientific computing. Endeavors in this direction are met with an important obstacle. MATLAB®, the predominant computation tool in many fields of research, is a closed-source commercial product. To facilitate the transition to an open computation platform, we propose Open-source MATLAB®-to-Python Compiler (OMPC), a platform that uses syntax adaptation and emulation to allow transparent import of existing MATLAB® functions into Python programs. The imported MATLAB® modules will run independently of MATLAB®, relying on Python's numerical and scientific libraries. Python offers a stable and mature open source platform that, in many respects, surpasses commonly used, expensive commercial closed source packages. The proposed software will therefore facilitate the transparent transition towards a free and general open-source lingua franca for scientific computation, while enabling access to the existing methods and algorithms of technical computing already available in MATLAB®. OMPC is available at http://ompc.juricap.com. PMID:19225577

78 FR 50374 - Proposed Information Collection; Comment Request; Information and Communication Technology Survey

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-19

... expenses (purchases; and operating leases and rental payments) for four types of information and communication technology equipment and software (computers and peripheral equipment; ICT equipment, excluding computers and peripherals; electromedical and electrotherapeutic apparatus; and computer software, including...

Low-Cost Terminal Alternative for Learning Center Managers. Final Report.

ERIC Educational Resources Information Center

Nix, C. Jerome; And Others

This study established the feasibility of replacing high performance and relatively expensive computer terminals with less expensive ones adequate for supporting specific tasks of Advanced Instructional System (AIS) at Lowry AFB, Colorado. Surveys of user requirements and available devices were conducted and the results used in a system analysis.…

Image compression using quad-tree coding with morphological dilation

NASA Astrophysics Data System (ADS)

Wu, Jiaji; Jiang, Weiwei; Jiao, Licheng; Wang, Lei

2007-11-01

In this paper, we propose a new algorithm which integrates morphological dilation operation to quad-tree coding, the purpose of doing this is to compensate each other's drawback by using quad-tree coding and morphological dilation operation respectively. New algorithm can not only quickly find the seed significant coefficient of dilation but also break the limit of block boundary of quad-tree coding. We also make a full use of both within-subband and cross-subband correlation to avoid the expensive cost of representing insignificant coefficients. Experimental results show that our algorithm outperforms SPECK and SPIHT. Without using any arithmetic coding, our algorithm can achieve good performance with low computational cost and it's more suitable to mobile devices or scenarios with a strict real-time requirement.

Autofocus method for automated microscopy using embedded GPUs.

PubMed

Castillo-Secilla, J M; Saval-Calvo, M; Medina-Valdès, L; Cuenca-Asensi, S; Martínez-Álvarez, A; Sánchez, C; Cristóbal, G

2017-03-01

In this paper we present a method for autofocusing images of sputum smears taken from a microscope which combines the finding of the optimal focus distance with an algorithm for extending the depth of field (EDoF). Our multifocus fusion method produces an unique image where all the relevant objects of the analyzed scene are well focused, independently to their distance to the sensor. This process is computationally expensive which makes unfeasible its automation using traditional embedded processors. For this purpose a low-cost optimized implementation is proposed using limited resources embedded GPU integrated on cutting-edge NVIDIA system on chip. The extensive tests performed on different sputum smear image sets show the real-time capabilities of our implementation maintaining the quality of the output image.

20 CFR 416.976 - Impairment-related work expenses.

Code of Federal Regulations, 2013 CFR

2013-04-01

... order to do your job, the payments you make for that equipment may be deducted. Examples of work-related... equipment. Expenses for appliances and equipment which you do not ordinarily use for medical purposes are... period, beginning with that month, whichever you select. If you begin working and do not receive earned...

20 CFR 416.976 - Impairment-related work expenses.

Code of Federal Regulations, 2014 CFR

2014-04-01

... order to do your job, the payments you make for that equipment may be deducted. Examples of work-related... equipment. Expenses for appliances and equipment which you do not ordinarily use for medical purposes are... period, beginning with that month, whichever you select. If you begin working and do not receive earned...

20 CFR 416.976 - Impairment-related work expenses.

Code of Federal Regulations, 2012 CFR

2012-04-01

... order to do your job, the payments you make for that equipment may be deducted. Examples of work-related... equipment. Expenses for appliances and equipment which you do not ordinarily use for medical purposes are... period, beginning with that month, whichever you select. If you begin working and do not receive earned...

49 CFR 24.305 - Fixed payment for moving expenses-nonresidential moves.

Code of Federal Regulations, 2010 CFR

2010-10-01

... displacement and for which an expense would be incurred in such move and, the business vacates or relocates from its displacement site; (2) The business cannot be relocated without a substantial loss of its...) The business is not operated at a displacement dwelling solely for the purpose of renting such...

49 CFR 24.305 - Fixed payment for moving expenses-nonresidential moves.

Code of Federal Regulations, 2011 CFR

2011-10-01

... displacement and for which an expense would be incurred in such move and, the business vacates or relocates from its displacement site; (2) The business cannot be relocated without a substantial loss of its...) The business is not operated at a displacement dwelling solely for the purpose of renting such...

49 CFR 24.305 - Fixed payment for moving expenses-nonresidential moves.

Code of Federal Regulations, 2013 CFR

2013-10-01

... displacement and for which an expense would be incurred in such move and, the business vacates or relocates from its displacement site; (2) The business cannot be relocated without a substantial loss of its...) The business is not operated at a displacement dwelling solely for the purpose of renting such...

49 CFR 24.305 - Fixed payment for moving expenses-nonresidential moves.

Code of Federal Regulations, 2014 CFR

2014-10-01

... displacement and for which an expense would be incurred in such move and, the business vacates or relocates from its displacement site; (2) The business cannot be relocated without a substantial loss of its...) The business is not operated at a displacement dwelling solely for the purpose of renting such...

49 CFR 24.305 - Fixed payment for moving expenses-nonresidential moves.

Code of Federal Regulations, 2012 CFR

2012-10-01

... displacement and for which an expense would be incurred in such move and, the business vacates or relocates from its displacement site; (2) The business cannot be relocated without a substantial loss of its...) The business is not operated at a displacement dwelling solely for the purpose of renting such...

41 CFR 304-2.1 - What definitions apply to this chapter?

Code of Federal Regulations, 2012 CFR

2012-07-01

... promotional vendor training or other meetings held for the primary purpose of marketing the non-Federal... Regulation System PAYMENT OF TRAVEL EXPENSES FROM A NON-FEDERAL SOURCE EMPLOYEE'S ACCEPTANCE OF PAYMENT FROM A NON-FEDERAL SOURCE FOR TRAVEL EXPENSES 2-DEFINITIONS § 304-2.1 What definitions apply to this...

41 CFR 304-2.1 - What definitions apply to this chapter?

Code of Federal Regulations, 2014 CFR

2014-07-01

... promotional vendor training or other meetings held for the primary purpose of marketing the non-Federal... Regulation System PAYMENT OF TRAVEL EXPENSES FROM A NON-FEDERAL SOURCE EMPLOYEE'S ACCEPTANCE OF PAYMENT FROM A NON-FEDERAL SOURCE FOR TRAVEL EXPENSES 2-DEFINITIONS § 304-2.1 What definitions apply to this...

41 CFR 304-2.1 - What definitions apply to this chapter?

Code of Federal Regulations, 2013 CFR

2013-07-01

... promotional vendor training or other meetings held for the primary purpose of marketing the non-Federal... Regulation System PAYMENT OF TRAVEL EXPENSES FROM A NON-FEDERAL SOURCE EMPLOYEE'S ACCEPTANCE OF PAYMENT FROM A NON-FEDERAL SOURCE FOR TRAVEL EXPENSES 2-DEFINITIONS § 304-2.1 What definitions apply to this...

Politics and School Education in Australia: A Case of Shifting Purposes

ERIC Educational Resources Information Center

Cranston, Neil; Kimber, Megan; Mulford, Bill; Reid, Alan; Keating, Jack

2010-01-01

Purpose: The paper aims to argue that there has been a privileging of the private (social mobility) and economic (social efficiency) purposes of schooling at the expense of the public (democratic equality) purposes of schooling. Design/methodology/approach: The paper employs a literature review, policy and document analysis. Findings: Since the…

Segmentation of White Blood Cells From Microscopic Images Using a Novel Combination of K-Means Clustering and Modified Watershed Algorithm.

PubMed

Ghane, Narjes; Vard, Alireza; Talebi, Ardeshir; Nematollahy, Pardis

2017-01-01

Recognition of white blood cells (WBCs) is the first step to diagnose some particular diseases such as acquired immune deficiency syndrome, leukemia, and other blood-related diseases that are usually done by pathologists using an optical microscope. This process is time-consuming, extremely tedious, and expensive and needs experienced experts in this field. Thus, a computer-aided diagnosis system that assists pathologists in the diagnostic process can be so effective. Segmentation of WBCs is usually a first step in developing a computer-aided diagnosis system. The main purpose of this paper is to segment WBCs from microscopic images. For this purpose, we present a novel combination of thresholding, k-means clustering, and modified watershed algorithms in three stages including (1) segmentation of WBCs from a microscopic image, (2) extraction of nuclei from cell's image, and (3) separation of overlapping cells and nuclei. The evaluation results of the proposed method show that similarity measures, precision, and sensitivity respectively were 92.07, 96.07, and 94.30% for nucleus segmentation and 92.93, 97.41, and 93.78% for cell segmentation. In addition, statistical analysis presents high similarity between manual segmentation and the results obtained by the proposed method.

Web-Based Job Submission Interface for the GAMESS Computational Chemistry Program

ERIC Educational Resources Information Center

Perri, M. J.; Weber, S. H.

2014-01-01

A Web site is described that facilitates use of the free computational chemistry software: General Atomic and Molecular Electronic Structure System (GAMESS). Its goal is to provide an opportunity for undergraduate students to perform computational chemistry experiments without the need to purchase expensive software.

Real-time autocorrelator for fluorescence correlation spectroscopy based on graphical-processor-unit architecture: method, implementation, and comparative studies

NASA Astrophysics Data System (ADS)

Laracuente, Nicholas; Grossman, Carl

2013-03-01

We developed an algorithm and software to calculate autocorrelation functions from real-time photon-counting data using the fast, parallel capabilities of graphical processor units (GPUs). Recent developments in hardware and software have allowed for general purpose computing with inexpensive GPU hardware. These devices are more suited for emulating hardware autocorrelators than traditional CPU-based software applications by emphasizing parallel throughput over sequential speed. Incoming data are binned in a standard multi-tau scheme with configurable points-per-bin size and are mapped into a GPU memory pattern to reduce time-expensive memory access. Applications include dynamic light scattering (DLS) and fluorescence correlation spectroscopy (FCS) experiments. We ran the software on a 64-core graphics pci card in a 3.2 GHz Intel i5 CPU based computer running Linux. FCS measurements were made on Alexa-546 and Texas Red dyes in a standard buffer (PBS). Software correlations were compared to hardware correlator measurements on the same signals. Supported by HHMI and Swarthmore College

A reduced successive quadratic programming strategy for errors-in-variables estimation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tjoa, I.-B.; Biegler, L. T.; Carnegie-Mellon Univ.

Parameter estimation problems in process engineering represent a special class of nonlinear optimization problems, because the maximum likelihood structure of the objective function can be exploited. Within this class, the errors in variables method (EVM) is particularly interesting. Here we seek a weighted least-squares fit to the measurements with an underdetermined process model. Thus, both the number of variables and degrees of freedom available for optimization increase linearly with the number of data sets. Large optimization problems of this type can be particularly challenging and expensive to solve because, for general-purpose nonlinear programming (NLP) algorithms, the computational effort increases atmore » least quadratically with problem size. In this study we develop a tailored NLP strategy for EVM problems. The method is based on a reduced Hessian approach to successive quadratic programming (SQP), but with the decomposition performed separately for each data set. This leads to the elimination of all variables but the model parameters, which are determined by a QP coordination step. In this way the computational effort remains linear in the number of data sets. Moreover, unlike previous approaches to the EVM problem, global and superlinear properties of the SQP algorithm apply naturally. Also, the method directly incorporates inequality constraints on the model parameters (although not on the fitted variables). This approach is demonstrated on five example problems with up to 102 degrees of freedom. Compared to general-purpose NLP algorithms, large improvements in computational performance are observed.« less

Computing Systems | High-Performance Computing | NREL

Science.gov Websites

investigate, build, and test models of complex phenomena or entire integrated systems-that cannot be directly observed or manipulated in the lab, or would be too expensive or time consuming. Models and visualizations

Lensfree Computational Microscopy Tools and their Biomedical Applications

NASA Astrophysics Data System (ADS)

Sencan, Ikbal

Conventional microscopy has been a revolutionary tool for biomedical applications since its invention several centuries ago. Ability to non-destructively observe very fine details of biological objects in real time enabled to answer many important questions about their structures and functions. Unfortunately, most of these advance microscopes are complex, bulky, expensive, and/or hard to operate, so they could not reach beyond the walls of well-equipped laboratories. Recent improvements in optoelectronic components and computational methods allow creating imaging systems that better fulfill the specific needs of clinics or research related biomedical applications. In this respect, lensfree computational microscopy aims to replace bulky and expensive optical components with compact and cost-effective alternatives through the use of computation, which can be particularly useful for lab-on-a-chip platforms as well as imaging applications in low-resource settings. Several high-throughput on-chip platforms are built with this approach for applications including, but not limited to, cytometry, micro-array imaging, rare cell analysis, telemedicine, and water quality screening. The lack of optical complexity in these lensfree on-chip imaging platforms is compensated by using computational techniques. These computational methods are utilized for various purposes in coherent, incoherent and fluorescent on-chip imaging platforms e.g. improving the spatial resolution, to undo the light diffraction without using lenses, localization of objects in a large volume and retrieval of the phase or the color/spectral content of the objects. For instance, pixel super resolution approaches based on source shifting are used in lensfree imaging platforms to prevent under sampling, Bayer pattern, and aliasing artifacts. Another method, iterative phase retrieval, is utilized to compensate the lack of lenses by undoing the diffraction and removing the twin image noise of in-line holograms. This technique enables recovering the complex optical field from its intensity measurement(s) by using additional constraints in iterations, such as spatial boundaries and other known properties of objects. Another computational tool employed in lensfree imaging is compressive sensing (or decoding), which is a novel method taking advantage of the fact that natural signals/objects are mostly sparse or compressible in known bases. This inherent property of objects enables better signal recovery when the number of measurement is low, even below the Nyquist rate, and increases the additive noise immunity of the system.

41 CFR 301-10.301 - How do I compute my mileage reimbursement?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false How do I compute my...-TRANSPORTATION EXPENSES Privately Owned Vehicle (POV) § 301-10.301 How do I compute my mileage reimbursement? You compute mileage reimbursement by multiplying the distance traveled, determined under § 301-10.302 of this...

Is Your School Y2K-OK?

ERIC Educational Resources Information Center

Bates, Martine G.

1999-01-01

The most vulnerable Y2K areas for schools are networked computers, free-standing personal computers, software, and embedded chips in utilities such as telephones and fire alarms. Expensive, time-consuming procedures and software have been developed for testing and bringing most computers into compliance. Districts need a triage prioritization…

Understanding the Internet.

ERIC Educational Resources Information Center

Oblinger, Diana

The Internet is an international network linking hundreds of smaller computer networks in North America, Europe, and Asia. Using the Internet, computer users can connect to a variety of computers with little effort or expense. The potential for use by college faculty is enormous. The largest problem faced by most users is understanding what such…

"Mini", "Midi" and the Student.

ERIC Educational Resources Information Center

Edwards, Perry; Broadwell, Bruce

Mini- and midi-computers have been introduced into the computer science program at Sierra College to afford students more direct contact with computers. The college's administration combined with the Science and Business departments to share the expense and utilization of the program. The National Cash Register Century 100 and the Data General…

48 CFR 970.5227-1 - Rights in data-facilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... software. (2) Computer software, as used in this clause, means (i) computer programs which are data... software. The term “data” does not include data incidental to the administration of this contract, such as... this clause, means data, other than computer software, developed at private expense that embody trade...

RenderMan design principles

NASA Technical Reports Server (NTRS)

Apodaca, Tony; Porter, Tom

1989-01-01

The two worlds of interactive graphics and realistic graphics have remained separate. Fast graphics hardware runs simple algorithms and generates simple looking images. Photorealistic image synthesis software runs slowly on large expensive computers. The time has come for these two branches of computer graphics to merge. The speed and expense of graphics hardware is no longer the barrier to the wide acceptance of photorealism. There is every reason to believe that high quality image synthesis will become a standard capability of every graphics machine, from superworkstation to personal computer. The significant barrier has been the lack of a common language, an agreed-upon set of terms and conditions, for 3-D modeling systems to talk to 3-D rendering systems for computing an accurate rendition of that scene. Pixar has introduced RenderMan to serve as that common language. RenderMan, specifically the extensibility it offers in shading calculations, is discussed.

Extending Strong Scaling of Quantum Monte Carlo to the Exascale

NASA Astrophysics Data System (ADS)

Shulenburger, Luke; Baczewski, Andrew; Luo, Ye; Romero, Nichols; Kent, Paul

Quantum Monte Carlo is one of the most accurate and most computationally expensive methods for solving the electronic structure problem. In spite of its significant computational expense, its massively parallel nature is ideally suited to petascale computers which have enabled a wide range of applications to relatively large molecular and extended systems. Exascale capabilities have the potential to enable the application of QMC to significantly larger systems, capturing much of the complexity of real materials such as defects and impurities. However, both memory and computational demands will require significant changes to current algorithms to realize this possibility. This talk will detail both the causes of the problem and potential solutions. Sandia National Laboratories is a multi-mission laboratory managed and operated by Sandia Corp, a wholly owned subsidiary of Lockheed Martin Corp, for the US Department of Energys National Nuclear Security Administration under contract DE-AC04-94AL85000.

Florida's Model of Nursing Home Medicaid Reimbursement for Disaster-Related Expenses

ERIC Educational Resources Information Center

Thomas, Kali S.; Hyer, Kathryn; Brown, Lisa M.; Polivka-West, LuMarie; Branch, Laurence G.

2010-01-01

Purpose: This study describes Florida's model of Medicaid nursing home (NH) reimbursement to compensate NHs for disaster-related expenses incurred as a result of 8 hurricanes within a 2-year period. This Florida model can serve as a demonstration for a national model for disaster-related reimbursement. Design and Methods: Florida reimburses NHs…

Learning technologies and the cyber-science classroom

NASA Astrophysics Data System (ADS)

Houlihan, Gerard

Access to computer and communication technology has long been regarded `part-and-parcel' of a good education. No educator can afford to ignore the profound impact of learning technologies on the way we teach science, nor fail to acknowledge that information literacy and computing skills will be fundamental to the practice of science in the next millennium. Nevertheless, there is still confusion concerning what technologies educators should employ in teaching science. Furthermore, a lack of knowledge combined with the pressures to be `seen' utilizing technology has lead some schools to waste scarce resources in a `grab-bag' attitude towards computers and technology. Such popularized `wish lists' can only drive schools to accumulate expensive equipment for no real learning purpose. In the future educators will have to reconsider their curriculum and pedagogy with a focus on the learning environment before determining what appropriate computing resources to acquire. This will be fundamental to the capabilities of science classrooms to engage with cutting-edge issues in science. This session will demonstrate the power of a broad range of learning technologies to enhance science education. The aim is to explore classroom possibilities as well as to provide a basic introduction to technical aspects of various software and hardware applications, including robotics and dataloggers and simulation software.

[Diagnostic possibilities of digital volume tomography].

PubMed

Lemkamp, Michael; Filippi, Andreas; Berndt, Dorothea; Lambrecht, J Thomas

2006-01-01

Cone beam computed tomography allows high quality 3D images of cranio-facial structures. Although detail resolution is increased, x-ray exposition is reduced compared to classic computer tomography. The volume is analysed in three orthogonal plains, which can be rotated independently without quality loss. Cone beam computed tomography seems to be a less expensive and less x-ray exposing alternative to classic computer tomography.

hPIN/hTAN: Low-Cost e-Banking Secure against Untrusted Computers

NASA Astrophysics Data System (ADS)

Li, Shujun; Sadeghi, Ahmad-Reza; Schmitz, Roland

We propose hPIN/hTAN, a low-cost token-based e-banking protection scheme when the adversary has full control over the user's computer. Compared with existing hardware-based solutions, hPIN/hTAN depends on neither second trusted channel, nor secure keypad, nor computationally expensive encryption module.

Analyzing brain networks with PCA and conditional Granger causality.

PubMed

Zhou, Zhenyu; Chen, Yonghong; Ding, Mingzhou; Wright, Paul; Lu, Zuhong; Liu, Yijun

2009-07-01

Identifying directional influences in anatomical and functional circuits presents one of the greatest challenges for understanding neural computations in the brain. Granger causality mapping (GCM) derived from vector autoregressive models of data has been employed for this purpose, revealing complex temporal and spatial dynamics underlying cognitive processes. However, the traditional GCM methods are computationally expensive, as signals from thousands of voxels within selected regions of interest (ROIs) are individually processed, and being based on pairwise Granger causality, they lack the ability to distinguish direct from indirect connectivity among brain regions. In this work a new algorithm called PCA based conditional GCM is proposed to overcome these problems. The algorithm implements the following two procedures: (i) dimensionality reduction in ROIs of interest with principle component analysis (PCA), and (ii) estimation of the direct causal influences in local brain networks, using conditional Granger causality. Our results show that the proposed method achieves greater accuracy in detecting network connectivity than the commonly used pairwise Granger causality method. Furthermore, the use of PCA components in conjunction with conditional GCM greatly reduces the computational cost relative to the use of individual voxel time series. Copyright 2009 Wiley-Liss, Inc

OMPC: an Open-Source MATLAB-to-Python Compiler.

PubMed

Jurica, Peter; van Leeuwen, Cees

2009-01-01

Free access to scientific information facilitates scientific progress. Open-access scientific journals are a first step in this direction; a further step is to make auxiliary and supplementary materials that accompany scientific publications, such as methodological procedures and data-analysis tools, open and accessible to the scientific community. To this purpose it is instrumental to establish a software base, which will grow toward a comprehensive free and open-source language of technical and scientific computing. Endeavors in this direction are met with an important obstacle. MATLAB((R)), the predominant computation tool in many fields of research, is a closed-source commercial product. To facilitate the transition to an open computation platform, we propose Open-source MATLAB((R))-to-Python Compiler (OMPC), a platform that uses syntax adaptation and emulation to allow transparent import of existing MATLAB((R)) functions into Python programs. The imported MATLAB((R)) modules will run independently of MATLAB((R)), relying on Python's numerical and scientific libraries. Python offers a stable and mature open source platform that, in many respects, surpasses commonly used, expensive commercial closed source packages. The proposed software will therefore facilitate the transparent transition towards a free and general open-source lingua franca for scientific computation, while enabling access to the existing methods and algorithms of technical computing already available in MATLAB((R)). OMPC is available at http://ompc.juricap.com.

The AAHA Computer Program. American Animal Hospital Association.

PubMed

Albers, J W

1986-07-01

The American Animal Hospital Association Computer Program should benefit all small animal practitioners. Through the availability of well-researched and well-developed certified software, veterinarians will have increased confidence in their purchase decisions. With the expansion of computer applications to improve practice management efficiency, veterinary computer systems will further justify their initial expense. The development of the Association's veterinary computer network will provide a variety of important services to the profession.

Numerical experience with a class of algorithms for nonlinear optimization using inexact function and gradient information

NASA Technical Reports Server (NTRS)

Carter, Richard G.

1989-01-01

For optimization problems associated with engineering design, parameter estimation, image reconstruction, and other optimization/simulation applications, low accuracy function and gradient values are frequently much less expensive to obtain than high accuracy values. Here, researchers investigate the computational performance of trust region methods for nonlinear optimization when high accuracy evaluations are unavailable or prohibitively expensive, and confirm earlier theoretical predictions when the algorithm is convergent even with relative gradient errors of 0.5 or more. The proper choice of the amount of accuracy to use in function and gradient evaluations can result in orders-of-magnitude savings in computational cost.

Multiobjective Aerodynamic Shape Optimization Using Pareto Differential Evolution and Generalized Response Surface Metamodels

NASA Technical Reports Server (NTRS)

Madavan, Nateri K.

2004-01-01

Differential Evolution (DE) is a simple, fast, and robust evolutionary algorithm that has proven effective in determining the global optimum for several difficult single-objective optimization problems. The DE algorithm has been recently extended to multiobjective optimization problem by using a Pareto-based approach. In this paper, a Pareto DE algorithm is applied to multiobjective aerodynamic shape optimization problems that are characterized by computationally expensive objective function evaluations. To improve computational expensive the algorithm is coupled with generalized response surface meta-models based on artificial neural networks. Results are presented for some test optimization problems from the literature to demonstrate the capabilities of the method.

7 CFR 1775.36 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (CONTINUED) TECHNICAL ASSISTANCE GRANTS Technical Assistance and Training Grants § 1775.36 Purpose. Grants... water and/or waste disposal loan/grant applications. (d) Provide technical assistance/training to... facilities. (e) Pay the expenses associated with providing the technical assistance and/or training...

Family Child Care Calendar-Keeper[TM] 2001: A Record Keeping System Including Nutrition Information for Child Care Providers. Twenty-Fourth Edition.

ERIC Educational Resources Information Center

Beuch, Beth, Ed.; Beuch, Ethel, Ed.; Schloff, Pam, Ed.

Noting that accurate recordkeeping for tax purposes is extremely important for family child care providers, this calendar provides a format for recording typical family child care expenses and other information. Included are the following: (1) monthly expense charts with categories matching Schedule C; (2) attendance and payment log; (3) payment…

Tax considerations associated with different types of forest ownership

Treesearch

William C. Siegel

2004-01-01

How expenses and income associated with woodland ownership are treated for tax purposes depends on the reason for owning the property, the use being made of it, the owner's taxpayer classification with respect to the property, and the nature of the income or expense item in question. For example, property tax payments can always be deducted by individual taxpayers...

26 CFR 1.612-4 - Charges to capital and to expense in case of oil and gas wells.

Code of Federal Regulations, 2014 CFR

2014-04-01

... expense. This option applies to all expenditures made by an operator for wages, fuel, repairs, hauling... applies are, all amounts paid for labor, fuel, repairs, hauling, and supplies, or any of them, which are... themselves do not have a salvage value. For the purpose of this option, labor, fuel, repairs, hauling...

26 CFR 1.612-4 - Charges to capital and to expense in case of oil and gas wells.

Code of Federal Regulations, 2012 CFR

2012-04-01

... expense. This option applies to all expenditures made by an operator for wages, fuel, repairs, hauling... applies are, all amounts paid for labor, fuel, repairs, hauling, and supplies, or any of them, which are... themselves do not have a salvage value. For the purpose of this option, labor, fuel, repairs, hauling...

26 CFR 1.612-4 - Charges to capital and to expense in case of oil and gas wells.

Code of Federal Regulations, 2013 CFR

2013-04-01

... expense. This option applies to all expenditures made by an operator for wages, fuel, repairs, hauling... applies are, all amounts paid for labor, fuel, repairs, hauling, and supplies, or any of them, which are... themselves do not have a salvage value. For the purpose of this option, labor, fuel, repairs, hauling...

Model Reduction of Computational Aerothermodynamics for Multi-Discipline Analysis in High Speed Flows

NASA Astrophysics Data System (ADS)

Crowell, Andrew Rippetoe

This dissertation describes model reduction techniques for the computation of aerodynamic heat flux and pressure loads for multi-disciplinary analysis of hypersonic vehicles. NASA and the Department of Defense have expressed renewed interest in the development of responsive, reusable hypersonic cruise vehicles capable of sustained high-speed flight and access to space. However, an extensive set of technical challenges have obstructed the development of such vehicles. These technical challenges are partially due to both the inability to accurately test scaled vehicles in wind tunnels and to the time intensive nature of high-fidelity computational modeling, particularly for the fluid using Computational Fluid Dynamics (CFD). The aim of this dissertation is to develop efficient and accurate models for the aerodynamic heat flux and pressure loads to replace the need for computationally expensive, high-fidelity CFD during coupled analysis. Furthermore, aerodynamic heating and pressure loads are systematically evaluated for a number of different operating conditions, including: simple two-dimensional flow over flat surfaces up to three-dimensional flows over deformed surfaces with shock-shock interaction and shock-boundary layer interaction. An additional focus of this dissertation is on the implementation and computation of results using the developed aerodynamic heating and pressure models in complex fluid-thermal-structural simulations. Model reduction is achieved using a two-pronged approach. One prong focuses on developing analytical corrections to isothermal, steady-state CFD flow solutions in order to capture flow effects associated with transient spatially-varying surface temperatures and surface pressures (e.g., surface deformation, surface vibration, shock impingements, etc.). The second prong is focused on minimizing the computational expense of computing the steady-state CFD solutions by developing an efficient surrogate CFD model. The developed two-pronged approach is found to exhibit balanced performance in terms of accuracy and computational expense, relative to several existing approaches. This approach enables CFD-based loads to be implemented into long duration fluid-thermal-structural simulations.

Atomicrex—a general purpose tool for the construction of atomic interaction models

NASA Astrophysics Data System (ADS)

Stukowski, Alexander; Fransson, Erik; Mock, Markus; Erhart, Paul

2017-07-01

We introduce atomicrex, an open-source code for constructing interatomic potentials as well as more general types of atomic-scale models. Such effective models are required to simulate extended materials structures comprising many thousands of atoms or more, because electronic structure methods become computationally too expensive at this scale. atomicrex covers a wide range of interatomic potential types and fulfills many needs in atomistic model development. As inputs, it supports experimental property values as well as ab initio energies and forces, to which models can be fitted using various optimization algorithms. The open architecture of atomicrex allows it to be used in custom model development scenarios beyond classical interatomic potentials while thanks to its Python interface it can be readily integrated e.g., with electronic structure calculations or machine learning algorithms.

7 CFR 771.5 - Loan purposes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Loan purposes. 771.5 Section 771.5 Agriculture... SPECIAL PROGRAMS BOLL WEEVIL ERADICATION LOAN PROGRAM § 771.5 Loan purposes. (a) Loan funds may be used..., travel and office operations; (3) Salaries and benefits. (b) Loan funds may not be used to pay expenses...

26 CFR 1.50B-3 - Estates and trusts.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 1 2010-04-01 2010-04-01 true Estates and trusts. 1.50B-3 Section 1.50B-3... Computing Credit for Expenses of Work Incentive Programs § 1.50B-3 Estates and trusts. (a) General rule—(1) In general. In the case of an estate or trust, WIN expenses (as defined in paragraph (a) of § 1.50B-1...

Paradigm Paralysis and the Plight of the PC in Education.

ERIC Educational Resources Information Center

O'Neil, Mick

1998-01-01

Examines the varied factors involved in providing Internet access in K-12 education, including expense, computer installation and maintenance, and security, and explores how the network computer could be useful in this context. Operating systems and servers are discussed. (MSE)

Computational Modeling in Concert with Laboratory Studies: Application to B Cell Differentiation

EPA Science Inventory

Remediation is expensive, so accurate prediction of dose-response is important to help control costs. Dose response is a function of biological mechanisms. Computational models of these mechanisms improve the efficiency of research and provide the capability for prediction.

A Talking Computers System for Persons with Vision and Speech Handicaps. Final Report.

ERIC Educational Resources Information Center

Visek & Maggs, Urbana, IL.

This final report contains a detailed description of six software systems designed to assist individuals with blindness and/or speech disorders in using inexpensive, off-the-shelf computers rather than expensive custom-made devices. The developed software is not written in the native machine language of any particular brand of computer, but in the…

[Cost analysis for navigation in knee endoprosthetics].

PubMed

Cerha, O; Kirschner, S; Günther, K-P; Lützner, J

2009-12-01

Total knee arthroplasty (TKA) is one of the most frequent procedures in orthopaedic surgery. The outcome depends on a range of factors including alignment of the leg and the positioning of the implant in addition to patient-associated factors. Computer-assisted navigation systems can improve the restoration of a neutral leg alignment. This procedure has been established especially in Europe and North America. The additional expenses are not reimbursed in the German DRG system (Diagnosis Related Groups). In the present study a cost analysis of computer-assisted TKA compared to the conventional technique was performed. The acquisition expenses of various navigation systems (5 and 10 year depreciation), annual costs for maintenance and software updates as well as the accompanying costs per operation (consumables, additional operating time) were considered. The additional operating time was determined on the basis of a meta-analysis according to the current literature. Situations with 25, 50, 100, 200 and 500 computer-assisted TKAs per year were simulated. The amount of the incremental costs of the computer-assisted TKA depends mainly on the annual volume and the additional operating time. A relevant decrease of the incremental costs was detected between 50 and 100 procedures per year. In a model with 100 computer-assisted TKAs per year an additional operating time of 14 mins and a 10 year depreciation of the investment costs, the incremental expenses amount to 300-395 depending on the navigation system. Computer-assisted TKA is associated with additional costs. From an economical point of view an amount of more than 50 procedures per year appears to be favourable. The cost-effectiveness could be estimated if long-term results will show a reduction of revisions or a better clinical outcome.

45 CFR 2528.70 - What steps are necessary to use an education award to pay expenses incurred in enrolling in a G.I...

Code of Federal Regulations, 2010 CFR

2010-10-01

... to pay expenses incurred in enrolling in a G.I. Bill approved program? 2528.70 Section 2528.70 Public... incurred in enrolling in a G.I. Bill approved program? (a) Required Information. Before disbursing an amount from an education award for this purpose, the Corporation must receive— (1) An individual's...

45 CFR 2528.70 - What steps are necessary to use an education award to pay expenses incurred in enrolling in a G.I...

Code of Federal Regulations, 2014 CFR

2014-10-01

... to pay expenses incurred in enrolling in a G.I. Bill approved program? 2528.70 Section 2528.70 Public... incurred in enrolling in a G.I. Bill approved program? (a) Required Information. Before disbursing an amount from an education award for this purpose, the Corporation must receive— (1) An individual's...

45 CFR 2528.70 - What steps are necessary to use an education award to pay expenses incurred in enrolling in a G.I...

Code of Federal Regulations, 2012 CFR

2012-10-01

... to pay expenses incurred in enrolling in a G.I. Bill approved program? 2528.70 Section 2528.70 Public... incurred in enrolling in a G.I. Bill approved program? (a) Required Information. Before disbursing an amount from an education award for this purpose, the Corporation must receive— (1) An individual's...

45 CFR 2528.70 - What steps are necessary to use an education award to pay expenses incurred in enrolling in a G.I...

Code of Federal Regulations, 2011 CFR

2011-10-01

... to pay expenses incurred in enrolling in a G.I. Bill approved program? 2528.70 Section 2528.70 Public... incurred in enrolling in a G.I. Bill approved program? (a) Required Information. Before disbursing an amount from an education award for this purpose, the Corporation must receive— (1) An individual's...

7 CFR 762.121 - Loan purposes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... associated with reorganizing a farm to improve its profitability; (ii) Purchase of livestock, including... purposes: (i) Payment of annual operating expenses, family subsistence, and purchase of feeder animals; (ii... circumstances can carry-over operating debts from a previous operating cycle be refinanced); (iii) Purchase of...

Use of less expensive cigarettes in six cities in China: findings from the International Tobacco Control (ITC) China Survey.

PubMed

Li, Qiang; Hyland, Andrew; Fong, Geoffrey T; Jiang, Yuan; Elton-Marshall, Tara

2010-10-01

The existence of less expensive cigarettes in China may undermine public health. The aim of the current study is to examine the use of less expensive cigarettes in six cities in China. Data was from the baseline wave of the International Tobacco Control (ITC) China Survey of 4815 adult urban smokers in 6 cities, conducted between April and August 2006. The percentage of smokers who reported buying less expensive cigarettes (the lowest pricing tertile within each city) at last purchase was computed. Complex sample multivariate logistic regression models were used to identify factors associated with use of less expensive cigarettes. The association between the use of less expensive cigarettes and intention to quit smoking was also examined. Smokers who reported buying less expensive cigarettes at last purchase tended to be older, heavier smokers, to have lower education and income, and to think more about the money spent on smoking in the last month. Smokers who bought less expensive cigarettes at the last purchase and who were less knowledgeable about the health harm of smoking were less likely to intend to quit smoking. Measures need to be taken to minimise the price differential among cigarette brands and to increase smokers' health knowledge, which may in turn increase their intentions to quit.

Aortic dissection simulation models for clinical support: fluid-structure interaction vs. rigid wall models.

PubMed

Alimohammadi, Mona; Sherwood, Joseph M; Karimpour, Morad; Agu, Obiekezie; Balabani, Stavroula; Díaz-Zuccarini, Vanessa

2015-04-15

The management and prognosis of aortic dissection (AD) is often challenging and the use of personalised computational models is being explored as a tool to improve clinical outcome. Including vessel wall motion in such simulations can provide more realistic and potentially accurate results, but requires significant additional computational resources, as well as expertise. With clinical translation as the final aim, trade-offs between complexity, speed and accuracy are inevitable. The present study explores whether modelling wall motion is worth the additional expense in the case of AD, by carrying out fluid-structure interaction (FSI) simulations based on a sample patient case. Patient-specific anatomical details were extracted from computed tomography images to provide the fluid domain, from which the vessel wall was extrapolated. Two-way fluid-structure interaction simulations were performed, with coupled Windkessel boundary conditions and hyperelastic wall properties. The blood was modelled using the Carreau-Yasuda viscosity model and turbulence was accounted for via a shear stress transport model. A simulation without wall motion (rigid wall) was carried out for comparison purposes. The displacement of the vessel wall was comparable to reports from imaging studies in terms of intimal flap motion and contraction of the true lumen. Analysis of the haemodynamics around the proximal and distal false lumen in the FSI model showed complex flow structures caused by the expansion and contraction of the vessel wall. These flow patterns led to significantly different predictions of wall shear stress, particularly its oscillatory component, which were not captured by the rigid wall model. Through comparison with imaging data, the results of the present study indicate that the fluid-structure interaction methodology employed herein is appropriate for simulations of aortic dissection. Regions of high wall shear stress were not significantly altered by the wall motion, however, certain collocated regions of low and oscillatory wall shear stress which may be critical for disease progression were only identified in the FSI simulation. We conclude that, if patient-tailored simulations of aortic dissection are to be used as an interventional planning tool, then the additional complexity, expertise and computational expense required to model wall motion is indeed justified.

GRAPE-6A: A Single-Card GRAPE-6 for Parallel PC-GRAPE Cluster Systems

NASA Astrophysics Data System (ADS)

Fukushige, Toshiyuki; Makino, Junichiro; Kawai, Atsushi

2005-12-01

In this paper, we describe the design and performance of GRAPE-6A, a special-purpose computer for gravitational many-body simulations. It was designed to be used with a PC cluster, in which each node has one GRAPE-6A. Such a configuration is particularly cost-effective in running parallel tree algorithms. Though the use of parallel tree algorithms was possible with the original GRAPE-6 hardware, it was not very cost-effective since a single GRAPE-6 board was still too fast and too expensive. Therefore, we designed GRAPE-6A as a single PCI card to minimize the reproduction cost and to optimize the computing speed. The peak performance is 130 Gflops for one GRAPE-6A board and 3.1 Tflops for our 24 node cluster. We describe the implementation of the tree, TreePM and individual timestep algorithms on both a single GRAPE-6A system and GRAPE-6A cluster. Using the tree algorithm on our 16-node GRAPE-6A system, we can complete a collisionless simulation with 100 million particles (8000 steps) within 10 days.

49 CFR Appendix A to Part 1511 - Aviation Security Infrastructure Fee

Code of Federal Regulations, 2012 CFR

2012-10-01

.... Please also submit the same information in Microsoft Word either on a computer disk or by e-mail to TSA..., including Checkpoint Screening Supervisors. 7. All associated expensed non-labor costs including computers, communications equipment, time management systems, supplies, parking, identification badging, furniture, fixtures...

49 CFR Appendix A to Part 1511 - Aviation Security Infrastructure Fee

Code of Federal Regulations, 2014 CFR

2014-10-01

.... Please also submit the same information in Microsoft Word either on a computer disk or by e-mail to TSA..., including Checkpoint Screening Supervisors. 7. All associated expensed non-labor costs including computers, communications equipment, time management systems, supplies, parking, identification badging, furniture, fixtures...

49 CFR Appendix A to Part 1511 - Aviation Security Infrastructure Fee

Code of Federal Regulations, 2013 CFR

2013-10-01

.... Please also submit the same information in Microsoft Word either on a computer disk or by e-mail to TSA..., including Checkpoint Screening Supervisors. 7. All associated expensed non-labor costs including computers, communications equipment, time management systems, supplies, parking, identification badging, furniture, fixtures...

Computer-assisted coding and clinical documentation: first things first.

PubMed

Tully, Melinda; Carmichael, Angela

2012-10-01

Computer-assisted coding tools have the potential to drive improvements in seven areas: Transparency of coding. Productivity (generally by 20 to 25 percent for inpatient claims). Accuracy (by improving specificity of documentation). Cost containment (by reducing overtime expenses, audit fees, and denials). Compliance. Efficiency. Consistency.

Low-cost motility tracking system (LOCOMOTIS) for time-lapse microscopy applications and cell visualisation.

PubMed

Lynch, Adam E; Triajianto, Junian; Routledge, Edwin

2014-01-01

Direct visualisation of cells for the purpose of studying their motility has typically required expensive microscopy equipment. However, recent advances in digital sensors mean that it is now possible to image cells for a fraction of the price of a standard microscope. Along with low-cost imaging there has also been a large increase in the availability of high quality, open-source analysis programs. In this study we describe the development and performance of an expandable cell motility system employing inexpensive, commercially available digital USB microscopes to image various cell types using time-lapse and perform tracking assays in proof-of-concept experiments. With this system we were able to measure and record three separate assays simultaneously on one personal computer using identical microscopes, and obtained tracking results comparable in quality to those from other studies that used standard, more expensive, equipment. The microscopes used in our system were capable of a maximum magnification of 413.6×. Although resolution was lower than that of a standard inverted microscope we found this difference to be indistinguishable at the magnification chosen for cell tracking experiments (206.8×). In preliminary cell culture experiments using our system, velocities (mean µm/min ± SE) of 0.81 ± 0.01 (Biomphalaria glabrata hemocytes on uncoated plates), 1.17 ± 0.004 (MDA-MB-231 breast cancer cells), 1.24 ± 0.006 (SC5 mouse Sertoli cells) and 2.21 ± 0.01 (B. glabrata hemocytes on Poly-L-Lysine coated plates), were measured and are consistent with previous reports. We believe that this system, coupled with open-source analysis software, demonstrates that higher throughput time-lapse imaging of cells for the purpose of studying motility can be an affordable option for all researchers.

Low-Cost Motility Tracking System (LOCOMOTIS) for Time-Lapse Microscopy Applications and Cell Visualisation

PubMed Central

Lynch, Adam E.; Triajianto, Junian; Routledge, Edwin

2014-01-01

Direct visualisation of cells for the purpose of studying their motility has typically required expensive microscopy equipment. However, recent advances in digital sensors mean that it is now possible to image cells for a fraction of the price of a standard microscope. Along with low-cost imaging there has also been a large increase in the availability of high quality, open-source analysis programs. In this study we describe the development and performance of an expandable cell motility system employing inexpensive, commercially available digital USB microscopes to image various cell types using time-lapse and perform tracking assays in proof-of-concept experiments. With this system we were able to measure and record three separate assays simultaneously on one personal computer using identical microscopes, and obtained tracking results comparable in quality to those from other studies that used standard, more expensive, equipment. The microscopes used in our system were capable of a maximum magnification of 413.6×. Although resolution was lower than that of a standard inverted microscope we found this difference to be indistinguishable at the magnification chosen for cell tracking experiments (206.8×). In preliminary cell culture experiments using our system, velocities (mean µm/min ± SE) of 0.81±0.01 (Biomphalaria glabrata hemocytes on uncoated plates), 1.17±0.004 (MDA-MB-231 breast cancer cells), 1.24±0.006 (SC5 mouse Sertoli cells) and 2.21±0.01 (B. glabrata hemocytes on Poly-L-Lysine coated plates), were measured and are consistent with previous reports. We believe that this system, coupled with open-source analysis software, demonstrates that higher throughput time-lapse imaging of cells for the purpose of studying motility can be an affordable option for all researchers. PMID:25121722

Leveraging Cloud Technology to Provide a Responsive, Reliable and Scalable Backend for the Virtual Ice Sheet Laboratory Using the Ice Sheet System Model and Amazon's Elastic Compute Cloud

NASA Astrophysics Data System (ADS)

Perez, G. L.; Larour, E. Y.; Halkides, D. J.; Cheng, D. L. C.

2015-12-01

The Virtual Ice Sheet Laboratory(VISL) is a Cryosphere outreach effort byscientists at the Jet Propulsion Laboratory(JPL) in Pasadena, CA, Earth and SpaceResearch(ESR) in Seattle, WA, and the University of California at Irvine (UCI), with the goal of providing interactive lessons for K-12 and college level students,while conforming to STEM guidelines. At the core of VISL is the Ice Sheet System Model(ISSM), an open-source project developed jointlyat JPL and UCI whose main purpose is to model the evolution of the polar ice caps in Greenland and Antarctica. By using ISSM, VISL students have access tostate-of-the-art modeling software that is being used to conduct scientificresearch by users all over the world. However, providing this functionality isby no means simple. The modeling of ice sheets in response to sea and atmospheric temperatures, among many other possible parameters, requiressignificant computational resources. Furthermore, this service needs to beresponsive and capable of handling burst requests produced by classrooms ofstudents. Cloud computing providers represent a burgeoning industry. With majorinvestments by tech giants like Amazon, Google and Microsoft, it has never beeneasier or more affordable to deploy computational elements on-demand. This isexactly what VISL needs and ISSM is capable of. Moreover, this is a promisingalternative to investing in expensive and rapidly devaluing hardware.

Reduced Design Load Basis for Ultimate Blade Loads Estimation in Multidisciplinary Design Optimization Frameworks

NASA Astrophysics Data System (ADS)

Pavese, Christian; Tibaldi, Carlo; Larsen, Torben J.; Kim, Taeseong; Thomsen, Kenneth

2016-09-01

The aim is to provide a fast and reliable approach to estimate ultimate blade loads for a multidisciplinary design optimization (MDO) framework. For blade design purposes, the standards require a large amount of computationally expensive simulations, which cannot be efficiently run each cost function evaluation of an MDO process. This work describes a method that allows integrating the calculation of the blade load envelopes inside an MDO loop. Ultimate blade load envelopes are calculated for a baseline design and a design obtained after an iteration of an MDO. These envelopes are computed for a full standard design load basis (DLB) and a deterministic reduced DLB. Ultimate loads extracted from the two DLBs with the two blade designs each are compared and analyzed. Although the reduced DLB supplies ultimate loads of different magnitude, the shape of the estimated envelopes are similar to the one computed using the full DLB. This observation is used to propose a scheme that is computationally cheap, and that can be integrated inside an MDO framework, providing a sufficiently reliable estimation of the blade ultimate loading. The latter aspect is of key importance when design variables implementing passive control methodologies are included in the formulation of the optimization problem. An MDO of a 10 MW wind turbine blade is presented as an applied case study to show the efficacy of the reduced DLB concept.

The dependence of educational infrastructure on clinical infrastructure.

PubMed Central

Cimino, C.

1998-01-01

The Albert Einstein College of Medicine needed to assess the growth of its infrastructure for educational computing as a first step to determining if student needs were being met. Included in computing infrastructure are space, equipment, software, and computing services. The infrastructure was assessed by reviewing purchasing and support logs for a six year period from 1992 to 1998. This included equipment, software, and e-mail accounts provided to students and to faculty for educational purposes. Student space has grown at a constant rate (averaging 14% increase each year respectively). Student equipment on campus has grown by a constant amount each year (average 8.3 computers each year). Student infrastructure off campus and educational support of faculty has not kept pace. It has either declined or remained level over the six year period. The availability of electronic mail clearly demonstrates this with accounts being used by 99% of students, 78% of Basic Science Course Leaders, 38% of Clerkship Directors, 18% of Clerkship Site Directors, and 8% of Clinical Elective Directors. The collection of the initial descriptive infrastructure data has revealed problems that may generalize to other medical schools. The discrepancy between infrastructure available to students and faculty on campus and students and faculty off campus creates a setting where students perceive a paradoxical declining support for computer use as they progress through medical school. While clinical infrastructure may be growing, it is at the expense of educational infrastructure at affiliate hospitals. PMID:9929262

48 CFR 227.7103-6 - Contract clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... expense). Do not use the clause when the only deliverable items are computer software or computer software... architect-engineer and construction contracts. (b)(1) Use the clause at 252.227-7013 with its Alternate I in... Software Previously Delivered to the Government, in solicitations when the resulting contract will require...

48 CFR 227.7103-6 - Contract clauses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... expense). Do not use the clause when the only deliverable items are computer software or computer software... architect-engineer and construction contracts. (b)(1) Use the clause at 252.227-7013 with its Alternate I in... Software Previously Delivered to the Government, in solicitations when the resulting contract will require...

A COMPUTATIONALLY EFFICIENT HYBRID APPROACH FOR DYNAMIC GAS/AEROSOL TRANSFER IN AIR QUALITY MODELS. (R826371C005)

EPA Science Inventory

Dynamic mass transfer methods have been developed to better describe the interaction of the aerosol population with semi-volatile species such as nitrate, ammonia, and chloride. Unfortunately, these dynamic methods are computationally expensive. Assumptions are often made to r...

Looking At Display Technologies

ERIC Educational Resources Information Center

Bull, Glen; Bull, Gina

2005-01-01

A projection system in a classroom with an Internet connection provides a window on the world. Until recently, projectors were expensive and difficult to maintain. Technological advances have resulted in solid-state projectors that require little maintenance and cost no more than a computer. Adding a second or third computer to a classroom…

Large-scale expensive black-box function optimization

NASA Astrophysics Data System (ADS)

Rashid, Kashif; Bailey, William; Couët, Benoît

2012-09-01

This paper presents the application of an adaptive radial basis function method to a computationally expensive black-box reservoir simulation model of many variables. An iterative proxy-based scheme is used to tune the control variables, distributed for finer control over a varying number of intervals covering the total simulation period, to maximize asset NPV. The method shows that large-scale simulation-based function optimization of several hundred variables is practical and effective.

Use of less expensive cigarettes in six cities in China: findings from the International Tobacco Control (ITC) China Survey

PubMed Central

Hyland, Andrew; Fong, Geoffrey T; Jiang, Yuan; Elton-Marshall, Tara

2010-01-01

Objective The existence of less expensive cigarettes in China may undermine public health. The aim of the current study is to examine the use of less expensive cigarettes in six cities in China. Methods Data was from the baseline wave of the International Tobacco Control (ITC) China Survey of 4815 adult urban smokers in 6 cities, conducted between April and August 2006. The percentage of smokers who reported buying less expensive cigarettes (the lowest pricing tertile within each city) at last purchase was computed. Complex sample multivariate logistic regression models were used to identify factors associated with use of less expensive cigarettes. The association between the use of less expensive cigarettes and intention to quit smoking was also examined. Results Smokers who reported buying less expensive cigarettes at last purchase tended to be older, heavier smokers, to have lower education and income, and to think more about the money spent on smoking in the last month. Smokers who bought less expensive cigarettes at the last purchase and who were less knowledgeable about the health harm of smoking were less likely to intend to quit smoking. Conclusions Measures need to be taken to minimise the price differential among cigarette brands and to increase smokers' health knowledge, which may in turn increase their intentions to quit. PMID:20935199

The Advantages of Using Technology in Second Language Education: Technology Integration in Foreign Language Teaching Demonstrates the Shift from a Behavioral to a Constructivist Learning Approach

ERIC Educational Resources Information Center

Wang, Li

2005-01-01

With the advent of networked computers and Internet technology, computer-based instruction has been widely used in language classrooms throughout the United States. Computer technologies have dramatically changed the way people gather information, conduct research and communicate with others worldwide. Considering the tremendous startup expenses,…

7 CFR 1980.310 - Loan purposes.

Code of Federal Regulations, 2011 CFR

2011-01-01

... cellars. Incidental expenses for tax monitoring services, architectural, appraisal, survey, environmental... to pay. (b) Special design features or equipment necessary to accommodate a physically disabled...

7 CFR 1980.310 - Loan purposes.

Code of Federal Regulations, 2012 CFR

2012-01-01

... cellars. Incidental expenses for tax monitoring services, architectural, appraisal, survey, environmental... to pay. (b) Special design features or equipment necessary to accommodate a physically disabled...

Multimedia architectures: from desktop systems to portable appliances

NASA Astrophysics Data System (ADS)

Bhaskaran, Vasudev; Konstantinides, Konstantinos; Natarajan, Balas R.

1997-01-01

Future desktop and portable computing systems will have as their core an integrated multimedia system. Such a system will seamlessly combine digital video, digital audio, computer animation, text, and graphics. Furthermore, such a system will allow for mixed-media creation, dissemination, and interactive access in real time. Multimedia architectures that need to support these functions have traditionally required special display and processing units for the different media types. This approach tends to be expensive and is inefficient in its use of silicon. Furthermore, such media-specific processing units are unable to cope with the fluid nature of the multimedia market wherein the needs and standards are changing and system manufacturers may demand a single component media engine across a range of products. This constraint has led to a shift towards providing a single-component multimedia specific computing engine that can be integrated easily within desktop systems, tethered consumer appliances, or portable appliances. In this paper, we review some of the recent architectural efforts in developing integrated media systems. We primarily focus on two efforts, namely the evolution of multimedia-capable general purpose processors and a more recent effort in developing single component mixed media co-processors. Design considerations that could facilitate the migration of these technologies to a portable integrated media system also are presented.

Development of a method to analyze orthopaedic practice expenses.

PubMed

Brinker, M R; Pierce, P; Siegel, G

2000-03-01

The purpose of the current investigation was to present a standard method by which an orthopaedic practice can analyze its practice expenses. To accomplish this, a five-step process was developed to analyze practice expenses using a modified version of activity-based costing. In this method, general ledger expenses were assigned to 17 activities that encompass all the tasks and processes typically performed in an orthopaedic practice. These 17 activities were identified in a practice expense study conducted for the American Academy of Orthopaedic Surgeons. To calculate the cost of each activity, financial data were used from a group of 19 orthopaedic surgeons in Houston, Texas. The activities that consumed the largest portion of the employee work force (person hours) were service patients in office (25.0% of all person hours), maintain medical records (13.6% of all person hours), and resolve collection disputes and rebill charges (12.3% of all person hours). The activities that comprised the largest portion of the total expenses were maintain facility (21.4%), service patients in office (16.0%), and sustain business by managing and coordinating practice (13.8%). The five-step process of analyzing practice expenses was relatively easy to perform and it may be used reliably by most orthopaedic practices.

Cloud computing can simplify HIT infrastructure management.

PubMed

Glaser, John

2011-08-01

Software as a Service (SaaS), built on cloud computing technology, is emerging as the forerunner in IT infrastructure because it helps healthcare providers reduce capital investments. Cloud computing leads to predictable, monthly, fixed operating expenses for hospital IT staff. Outsourced cloud computing facilities are state-of-the-art data centers boasting some of the most sophisticated networking equipment on the market. The SaaS model helps hospitals safeguard against technology obsolescence, minimizes maintenance requirements, and simplifies management.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krityakierne, Tipaluck; Akhtar, Taimoor; Shoemaker, Christine A.

This paper presents a parallel surrogate-based global optimization method for computationally expensive objective functions that is more effective for larger numbers of processors. To reach this goal, we integrated concepts from multi-objective optimization and tabu search into, single objective, surrogate optimization. Our proposed derivative-free algorithm, called SOP, uses non-dominated sorting of points for which the expensive function has been previously evaluated. The two objectives are the expensive function value of the point and the minimum distance of the point to previously evaluated points. Based on the results of non-dominated sorting, P points from the sorted fronts are selected as centersmore » from which many candidate points are generated by random perturbations. Based on surrogate approximation, the best candidate point is subsequently selected for expensive evaluation for each of the P centers, with simultaneous computation on P processors. Centers that previously did not generate good solutions are tabu with a given tenure. We show almost sure convergence of this algorithm under some conditions. The performance of SOP is compared with two RBF based methods. The test results show that SOP is an efficient method that can reduce time required to find a good near optimal solution. In a number of cases the efficiency of SOP is so good that SOP with 8 processors found an accurate answer in less wall-clock time than the other algorithms did with 32 processors.« less

Evaluation of the effectiveness of two support surfaces following myocutaneous flap surgery.

PubMed

Economides, N G; Skoutakis, V A; Carter, C A; Smith, V H

1995-01-01

Recurrence of pressure ulcers is a serious problem following myocutaneous flap surgery and can lead to prolonged and expensive hospitalization. One of the most important aspects of patient care after surgery is the monitoring of reduced pressure in the area of the flap. Usually reducing pressure requires an expensive high-tech support surface. The purpose of this study was to evaluate the effectiveness of a less expensive support surface. There were 12 patients involved in a clinical trial that lasted 14 days and compared the effectiveness of the ROHO dry-floatation mattress to that of the Clinitron bed. Findings indicated that post-operative patients were effectively treated on either support surface.

The Chemical Engineer's Toolbox: A Glass Box Approach to Numerical Problem Solving

ERIC Educational Resources Information Center

Coronell, Daniel G.; Hariri, M. Hossein

2009-01-01

Computer programming in undergraduate engineering education all too often begins and ends with the freshman programming course. Improvements in computer technology and curriculum revision have improved this situation, but often at the expense of the students' learning due to the use of commercial "black box" software. This paper describes the…

Data Bases at a State Institution--Costs, Uses and Needs. AIR Forum Paper 1978.

ERIC Educational Resources Information Center

McLaughlin, Gerald W.

The cost-benefit of administrative data at a state college is placed in perspective relative to the institutional involvement in computer use. The costs of computer operations, personnel, and peripheral equipment expenses related to instruction are analyzed. Data bases and systems support institutional activities, such as registration, and aid…

Film Library Information Management System.

ERIC Educational Resources Information Center

Minnella, C. Vincent; And Others

The computer program described not only allows the user to determine rental sources for a particular film title quickly, but also to select the least expensive of the sources. This program developed at SUNY Cortland's Sperry Learning Resources Center and Computer Center is designed to maintain accurate data on rental and purchase films in both…

Four-dimensional volume-of-interest reconstruction for cone-beam computed tomography-guided radiation therapy

PubMed Central

Ahmad, Moiz; Balter, Peter; Pan, Tinsu

2011-01-01

Purpose: Data sufficiency are a major problem in four-dimensional cone-beam computed tomography (4D-CBCT) on linear accelerator-integrated scanners for image-guided radiotherapy. Scan times must be in the range of 4–6 min to avoid undersampling artifacts. Various image reconstruction algorithms have been proposed to accommodate undersampled data acquisitions, but these algorithms are computationally expensive, may require long reconstruction times, and may require algorithm parameters to be optimized. The authors present a novel reconstruction method, 4D volume-of-interest (4D-VOI) reconstruction which suppresses undersampling artifacts and resolves lung tumor motion for undersampled 1-min scans. The 4D-VOI reconstruction is much less computationally expensive than other 4D-CBCT algorithms. Methods: The 4D-VOI method uses respiration-correlated projection data to reconstruct a four-dimensional (4D) image inside a VOI containing the moving tumor, and uncorrelated projection data to reconstruct a three-dimensional (3D) image outside the VOI. Anatomical motion is resolved inside the VOI and blurred outside the VOI. The authors acquired a 1-min. scan of an anthropomorphic chest phantom containing a moving water-filled sphere. The authors also used previously acquired 1-min scans for two lung cancer patients who had received CBCT-guided radiation therapy. The same raw data were used to test and compare the 4D-VOI reconstruction with the standard 4D reconstruction and the McKinnon-Bates (MB) reconstruction algorithms. Results: Both the 4D-VOI and the MB reconstructions suppress nearly all the streak artifacts compared with the standard 4D reconstruction, but the 4D-VOI has 3–8 times greater contrast-to-noise ratio than the MB reconstruction. In the dynamic chest phantom study, the 4D-VOI and the standard 4D reconstructions both resolved a moving sphere with an 18 mm displacement. The 4D-VOI reconstruction shows a motion blur of only 3 mm, whereas the MB reconstruction shows a motion blur of 13 mm. With graphics processing unit hardware used to accelerate computations, the 4D-VOI reconstruction required a 40-s reconstruction time. Conclusions: 4D-VOI reconstruction effectively reduces undersampling artifacts and resolves lung tumor motion in 4D-CBCT. The 4D-VOI reconstruction is computationally inexpensive compared with more sophisticated iterative algorithms. Compared with these algorithms, our 4D-VOI reconstruction is an attractive alternative in 4D-CBCT for reconstructing target motion without generating numerous streak artifacts. PMID:21992381

7 CFR 764.251 - Operating loan uses.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., quotas and bases, and cooperative stock for credit, production, processing or marketing purposes; (3) Farm operating expenses, including, but not limited to, feed, seed, fertilizer, pesticides, farm...

7 CFR 764.251 - Operating loan uses.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., quotas and bases, and cooperative stock for credit, production, processing or marketing purposes; (3) Farm operating expenses, including, but not limited to, feed, seed, fertilizer, pesticides, farm...

7 CFR 764.251 - Operating loan uses.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., quotas and bases, and cooperative stock for credit, production, processing or marketing purposes; (3) Farm operating expenses, including, but not limited to, feed, seed, fertilizer, pesticides, farm...

7 CFR 764.251 - Operating loan uses.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., quotas and bases, and cooperative stock for credit, production, processing or marketing purposes; (3) Farm operating expenses, including, but not limited to, feed, seed, fertilizer, pesticides, farm...

7 CFR 764.251 - Operating loan uses.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., quotas and bases, and cooperative stock for credit, production, processing or marketing purposes; (3) Farm operating expenses, including, but not limited to, feed, seed, fertilizer, pesticides, farm...

Understanding trends in C-H bond activation in heterogeneous catalysis.

PubMed

Latimer, Allegra A; Kulkarni, Ambarish R; Aljama, Hassan; Montoya, Joseph H; Yoo, Jong Suk; Tsai, Charlie; Abild-Pedersen, Frank; Studt, Felix; Nørskov, Jens K

2017-02-01

While the search for catalysts capable of directly converting methane to higher value commodity chemicals and liquid fuels has been active for over a century, a viable industrial process for selective methane activation has yet to be developed. Electronic structure calculations are playing an increasingly relevant role in this search, but large-scale materials screening efforts are hindered by computationally expensive transition state barrier calculations. The purpose of the present letter is twofold. First, we show that, for the wide range of catalysts that proceed via a radical intermediate, a unifying framework for predicting C-H activation barriers using a single universal descriptor can be established. Second, we combine this scaling approach with a thermodynamic analysis of active site formation to provide a map of methane activation rates. Our model successfully rationalizes the available empirical data and lays the foundation for future catalyst design strategies that transcend different catalyst classes.

Understanding trends in C–H bond activation in heterogeneous catalysis

DOE PAGES

Latimer, Allegra A.; Kulkarni, Ambarish R.; Aljama, Hassan; ...

2016-10-10

While the search for catalysts capable of directly converting methane to higher value commodity chemicals and liquid fuels has been active for over a century, a viable industrial process for selective methane activation has yet to be developed1. Electronic structure calculations are playing an increasingly relevant role in this search, but large-scale materials screening efforts are hindered by computationally expensive transition state barrier calculations. The purpose of the present letter is twofold. First, we show that, for the wide range of catalysts that proceed via a radical intermediate, a unifying framework for predicting C–H activation barriers using a single universalmore » descriptor can be established. Second, we combine this scaling approach with a thermodynamic analysis of active site formation to provide a map of methane activation rates. Lastly, our model successfully rationalizes the available empirical data and lays the foundation for future catalyst design strategies that transcend different catalyst classes.« less

Understanding trends in C-H bond activation in heterogeneous catalysis

NASA Astrophysics Data System (ADS)

Latimer, Allegra A.; Kulkarni, Ambarish R.; Aljama, Hassan; Montoya, Joseph H.; Yoo, Jong Suk; Tsai, Charlie; Abild-Pedersen, Frank; Studt, Felix; Nørskov, Jens K.

2017-02-01

While the search for catalysts capable of directly converting methane to higher value commodity chemicals and liquid fuels has been active for over a century, a viable industrial process for selective methane activation has yet to be developed. Electronic structure calculations are playing an increasingly relevant role in this search, but large-scale materials screening efforts are hindered by computationally expensive transition state barrier calculations. The purpose of the present letter is twofold. First, we show that, for the wide range of catalysts that proceed via a radical intermediate, a unifying framework for predicting C-H activation barriers using a single universal descriptor can be established. Second, we combine this scaling approach with a thermodynamic analysis of active site formation to provide a map of methane activation rates. Our model successfully rationalizes the available empirical data and lays the foundation for future catalyst design strategies that transcend different catalyst classes.

[Comparison of 4 methods of evaluating protein quality in vegetable sources].

PubMed

Muñoz de Maquiña, A; Gross, R; Schoeneberger, H; Villacorta, L

1983-12-01

This study compares the practical value of the following methods: protein efficiency ratio (PER), blood urea concentration in rats (BUC), relative nutritive value (RNV), and predicted protein value (PPV) to evaluate the protein quality of 41 diets of plant origin. Results demonstrated low correlations between PER and RNV (r = 0.66), PER and PPV (r = 0.53), RNV and PPV (r = 0.54), whereas there was a high negative correlation between PER and BUC (r = -0.89). These different procedures can be useful and valid for distinct and well-defined objectives, but the evaluation of results must be made in accordance with the purpose of the experiment. In assessing the protein quality of foodstuffs, it is therefore recommended that mathematical computer models be developed which take into account the cybernetic system of the amino acid metabolism. This would definitely reduce the actual need of expensive long-term biological assays.

Correlation energy extrapolation by many-body expansion

DOE PAGES

Boschen, Jeffery S.; Theis, Daniel; Ruedenberg, Klaus; ...

2017-01-09

Accounting for electron correlation is required for high accuracy calculations of molecular energies. The full configuration interaction (CI) approach can fully capture the electron correlation within a given basis, but it does so at a computational expense that is impractical for all but the smallest chemical systems. In this work, a new methodology is presented to approximate configuration interaction calculations at a reduced computational expense and memory requirement, namely, the correlation energy extrapolation by many-body expansion (CEEMBE). This method combines a MBE approximation of the CI energy with an extrapolated correction obtained from CI calculations using subsets of the virtualmore » orbitals. The extrapolation approach is inspired by, and analogous to, the method of correlation energy extrapolation by intrinsic scaling. Benchmark calculations of the new method are performed on diatomic fluorine and ozone. Finally, the method consistently achieves agreement with CI calculations to within a few mhartree and often achieves agreement to within ~1 millihartree or less, while requiring significantly less computational resources.« less

Correlation energy extrapolation by many-body expansion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boschen, Jeffery S.; Theis, Daniel; Ruedenberg, Klaus

Accounting for electron correlation is required for high accuracy calculations of molecular energies. The full configuration interaction (CI) approach can fully capture the electron correlation within a given basis, but it does so at a computational expense that is impractical for all but the smallest chemical systems. In this work, a new methodology is presented to approximate configuration interaction calculations at a reduced computational expense and memory requirement, namely, the correlation energy extrapolation by many-body expansion (CEEMBE). This method combines a MBE approximation of the CI energy with an extrapolated correction obtained from CI calculations using subsets of the virtualmore » orbitals. The extrapolation approach is inspired by, and analogous to, the method of correlation energy extrapolation by intrinsic scaling. Benchmark calculations of the new method are performed on diatomic fluorine and ozone. Finally, the method consistently achieves agreement with CI calculations to within a few mhartree and often achieves agreement to within ~1 millihartree or less, while requiring significantly less computational resources.« less

45 CFR 2507.5 - How does the Corporation process requests for records?

Code of Federal Regulations, 2013 CFR

2013-10-01

... compelled to create new records or do statistical computations. For example, the Corporation is not required... feasible way to respond to a request. The Corporation is not required to perform any research for the... duplicating all of them. For example, if it requires less time and expense to provide a computer record as a...

26 CFR 1.179-5 - Time and manner of making election.

Code of Federal Regulations, 2010 CFR

2010-04-01

... desktop computer costing $1,500. On Taxpayer's 2003 Federal tax return filed on April 15, 2004, Taxpayer elected to expense under section 179 the full cost of the laptop computer and the full cost of the desktop... provided by the Internal Revenue Code, the regulations under the Code, or other guidance published in the...

Innovative Leaders Take the Phone and Run: Profiles of Four Trailblazing Programs

ERIC Educational Resources Information Center

Norris, Cathleen; Soloway, Elliot; Menchhofer, Kyle; Bauman, Billie Diane; Dickerson, Mindy; Schad, Lenny; Tomko, Sue

2010-01-01

While the Internet changed everything, mobile will change everything squared. The Internet is just a roadway, and computers--the equivalent of cars for the Internet--have been expensive. The keepers of the information roadway--the telecommunication companies--will give one a "computer," such as cell phone, mobile learning device, or MLD,…

75 FR 25161 - Defense Federal Acquisition Regulation Supplement; Presumption of Development at Private Expense

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-07

... asserted restrictions on technical data and computer software. DATES: Comments on the proposed rule should... restrictions on technical data and computer software. More specifically, the proposed rule affects these...) items (as defined at 41 U.S.C. 431(c)). Since COTS items are a subtype of commercial items, this change...

17 CFR 240.17a-3 - Records to be made by certain exchange members, brokers and dealers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... records) reflecting all assets and liabilities, income and expense and capital accounts. (3) Ledger..., and a record of the computation of aggregate indebtedness and net capital, as of the trial balance...) thereof shall make a record of the computation of aggregate indebtedness and net capital as of the trial...

School-related expenses, living expenses, and income sources for graduate students in nurse anesthesia programs.

PubMed

Heikkila, Dianna

2002-02-01

Nurse anesthesia programs (NAPs) are the highest priced programs for graduate students compared with 7 other nursing master's degree programs. Not only are nurse anesthesia programs expensive, but also most students are encouraged by the policies within their individual programs to terminate full-time employment before matriculation. The purpose of this study was to determine school-related and living expenses, as well as the income and sources of income for graduate students in the second year of their NAP. To obtain the information, a student cost survey was designed and administered to participants attending NAPs across the United States during the 2001 school year. In addition, total degree costs were analyzed using a cost model assessing 4 components: educational costs, living expenses, net income foregone, and loan costs. The results showed that total degree costs incurred by graduate students in NAPs to complete their nurse anesthesia education totals $173,007. The analysis of the sources of income showed the following sources were used by respondents: guaranteed student loans; a spouse's income; agreements with future employers; stipends from universities, hospitals, and/or the military; grants; family support; and self-income. Completing a nurse anesthesia education program is expensive, although the expected return on the investment is high. Nevertheless, the expense may keep qualified graduate students from entering NAPs.

Application of Sequence Comparison Methods to Multisensor Data Fusion and Target Recognition

DTIC Science & Technology

1993-06-18

lin- ear comparison). A particularly attractive aspect of the proposed fusion scheme is that it has the potential to work for any object with (1...radar sensing is a historical custom - however, the reader should keep in mind that the fundamental issue in this research is to explore and exploit...reduce the computationally expensive need to compute partial derivatives. In usual practice, the computationally more attractive filter design is

The visible ear simulator: a public PC application for GPU-accelerated haptic 3D simulation of ear surgery based on the visible ear data.

PubMed

Sorensen, Mads Solvsten; Mosegaard, Jesper; Trier, Peter

2009-06-01

Existing virtual simulators for middle ear surgery are based on 3-dimensional (3D) models from computed tomographic or magnetic resonance imaging data in which image quality is limited by the lack of detail (maximum, approximately 50 voxels/mm3), natural color, and texture of the source material.Virtual training often requires the purchase of a program, a customized computer, and expensive peripherals dedicated exclusively to this purpose. The Visible Ear freeware library of digital images from a fresh-frozen human temporal bone was segmented, and real-time volume rendered as a 3D model of high-fidelity, true color, and great anatomic detail and realism of the surgically relevant structures. A haptic drilling model was developed for surgical interaction with the 3D model. Realistic visualization in high-fidelity (approximately 125 voxels/mm3) and true color, 2D, or optional anaglyph stereoscopic 3D was achieved on a standard Core 2 Duo personal computer with a GeForce 8,800 GTX graphics card, and surgical interaction was provided through a relatively inexpensive (approximately $2,500) Phantom Omni haptic 3D pointing device. This prototype is published for download (approximately 120 MB) as freeware at http://www.alexandra.dk/ves/index.htm.With increasing personal computer performance, future versions may include enhanced resolution (up to 8,000 voxels/mm3) and realistic interaction with deformable soft tissue components such as skin, tympanic membrane, dura, and cholesteatomas-features some of which are not possible with computed tomographic-/magnetic resonance imaging-based systems.

12 CFR 607.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

...'s costs of supervising and examining the Federal Agricultural Mortgage Corporation (FAMC). The... annual administrative expenses and necessary reserves among Farm Credit System (System) institutions... examinations of non-System entities. ...

77 FR 52785 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-30

.... Title: REG-161424-01 (Final), Information Reporting for Qualified Tuition and Related Expenses; Magnetic... guidance regarding the calculation of heating and cooling energy consumption for purposes of determining...

7 CFR 3560.102 - Housing project management.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., unless the machine becomes the property of the project after purchase. (iii) Determining if Expenses are... computer learning center activities benefiting tenants are not covered in this prohibition. (viii) It is...

7 CFR 3560.102 - Housing project management.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., unless the machine becomes the property of the project after purchase. (iii) Determining if Expenses are... computer learning center activities benefiting tenants are not covered in this prohibition. (viii) It is...

7 CFR 3560.102 - Housing project management.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., unless the machine becomes the property of the project after purchase. (iii) Determining if Expenses are... computer learning center activities benefiting tenants are not covered in this prohibition. (viii) It is...

7 CFR 3560.102 - Housing project management.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., unless the machine becomes the property of the project after purchase. (iii) Determining if Expenses are... computer learning center activities benefiting tenants are not covered in this prohibition. (viii) It is...

RNA-SSPT: RNA Secondary Structure Prediction Tools.

PubMed

Ahmad, Freed; Mahboob, Shahid; Gulzar, Tahsin; Din, Salah U; Hanif, Tanzeela; Ahmad, Hifza; Afzal, Muhammad

2013-01-01

The prediction of RNA structure is useful for understanding evolution for both in silico and in vitro studies. Physical methods like NMR studies to predict RNA secondary structure are expensive and difficult. Computational RNA secondary structure prediction is easier. Comparative sequence analysis provides the best solution. But secondary structure prediction of a single RNA sequence is challenging. RNA-SSPT is a tool that computationally predicts secondary structure of a single RNA sequence. Most of the RNA secondary structure prediction tools do not allow pseudoknots in the structure or are unable to locate them. Nussinov dynamic programming algorithm has been implemented in RNA-SSPT. The current studies shows only energetically most favorable secondary structure is required and the algorithm modification is also available that produces base pairs to lower the total free energy of the secondary structure. For visualization of RNA secondary structure, NAVIEW in C language is used and modified in C# for tool requirement. RNA-SSPT is built in C# using Dot Net 2.0 in Microsoft Visual Studio 2005 Professional edition. The accuracy of RNA-SSPT is tested in terms of Sensitivity and Positive Predicted Value. It is a tool which serves both secondary structure prediction and secondary structure visualization purposes.

RNA-SSPT: RNA Secondary Structure Prediction Tools

PubMed Central

Ahmad, Freed; Mahboob, Shahid; Gulzar, Tahsin; din, Salah U; Hanif, Tanzeela; Ahmad, Hifza; Afzal, Muhammad

2013-01-01

The prediction of RNA structure is useful for understanding evolution for both in silico and in vitro studies. Physical methods like NMR studies to predict RNA secondary structure are expensive and difficult. Computational RNA secondary structure prediction is easier. Comparative sequence analysis provides the best solution. But secondary structure prediction of a single RNA sequence is challenging. RNA-SSPT is a tool that computationally predicts secondary structure of a single RNA sequence. Most of the RNA secondary structure prediction tools do not allow pseudoknots in the structure or are unable to locate them. Nussinov dynamic programming algorithm has been implemented in RNA-SSPT. The current studies shows only energetically most favorable secondary structure is required and the algorithm modification is also available that produces base pairs to lower the total free energy of the secondary structure. For visualization of RNA secondary structure, NAVIEW in C language is used and modified in C# for tool requirement. RNA-SSPT is built in C# using Dot Net 2.0 in Microsoft Visual Studio 2005 Professional edition. The accuracy of RNA-SSPT is tested in terms of Sensitivity and Positive Predicted Value. It is a tool which serves both secondary structure prediction and secondary structure visualization purposes. PMID:24250115

Enzyme stabilization via computationally guided protein stapling.

PubMed

Moore, Eric J; Zorine, Dmitri; Hansen, William A; Khare, Sagar D; Fasan, Rudi

2017-11-21

Thermostabilization represents a critical and often obligatory step toward enhancing the robustness of enzymes for organic synthesis and other applications. While directed evolution methods have provided valuable tools for this purpose, these protocols are laborious and time-consuming and typically require the accumulation of several mutations, potentially at the expense of catalytic function. Here, we report a minimally invasive strategy for enzyme stabilization that relies on the installation of genetically encoded, nonreducible covalent staples in a target protein scaffold using computational design. This methodology enables the rapid development of myoglobin-based cyclopropanation biocatalysts featuring dramatically enhanced thermostability (Δ T m = +18.0 °C and Δ T 50 = +16.0 °C) as well as increased stability against chemical denaturation [Δ C m (GndHCl) = 0.53 M], without altering their catalytic efficiency and stereoselectivity properties. In addition, the stabilized variants offer superior performance and selectivity compared with the parent enzyme in the presence of a high concentration of organic cosolvents, enabling the more efficient cyclopropanation of a water-insoluble substrate. This work introduces and validates an approach for protein stabilization which should be applicable to a variety of other proteins and enzymes.

Algorithm and code development for unsteady three-dimensional Navier-Stokes equations

NASA Technical Reports Server (NTRS)

Obayashi, Shigeru

1993-01-01

In the last two decades, there have been extensive developments in computational aerodynamics, which constitutes a major part of the general area of computational fluid dynamics. Such developments are essential to advance the understanding of the physics of complex flows, to complement expensive wind-tunnel tests, and to reduce the overall design cost of an aircraft, particularly in the area of aeroelasticity. Aeroelasticity plays an important role in the design and development of aircraft, particularly modern aircraft, which tend to be more flexible. Several phenomena that can be dangerous and limit the performance of an aircraft occur because of the interaction of the flow with flexible components. For example, an aircraft with highly swept wings may experience vortex-induced aeroelastic oscillations. Also, undesirable aeroelastic phenomena due to the presence and movement of shock waves occur in the transonic range. Aeroelastically critical phenomena, such as a low transonic flutter speed, have been known to occur through limited wind-tunnel tests and flight tests. Aeroelastic tests require extensive cost and risk. An aeroelastic wind-tunnel experiment is an order of magnitude more expensive than a parallel experiment involving only aerodynamics. By complementing the wind-tunnel experiments with numerical simulations the overall cost of the development of aircraft can be considerably reduced. In order to accurately compute aeroelastic phenomenon it is necessary to solve the unsteady Euler/Navier-Stokes equations simultaneously with the structural equations of motion. These equations accurately describe the flow phenomena for aeroelastic applications. At Ames a code, ENSAERO, is being developed for computing the unsteady aerodynamics and aeroelasticity of aircraft and it solves the Euler/Navier-Stokes equations. The purpose of this contract is to continue the algorithm enhancements of ENSAERO and to apply the code to complicated geometries. During the last year, the geometric capability of the code was extended to simulate transonic flows, a wing with oscillating control surface. Single-grid and zonal approaches were tested. For the zonal approach, a new interpolation technique was introduced. The key development of the algorithm was an interface treatment between moving zones for a control surface using the virtual-zone concept. The work performed during the period, 1 Apr. 1992 through 31 Mar. 1993 is summarized. Additional details on the various aspects of the study are given in the Appendices.

47 CFR 32.7300 - Nonoperating income and expense.

Code of Federal Regulations, 2010 CFR

2010-10-01

... requirements; (7) Amortization of goodwill; (8) Company's share of the earnings or losses of affiliated... ordinances) or approval, modification, or revocation of franchises, or for the purpose of influencing the...

Improving finite element results in modeling heart valve mechanics.

PubMed

Earl, Emily; Mohammadi, Hadi

2018-06-01

Finite element analysis is a well-established computational tool which can be used for the analysis of soft tissue mechanics. Due to the structural complexity of the leaflet tissue of the heart valve, the currently available finite element models do not adequately represent the leaflet tissue. A method of addressing this issue is to implement computationally expensive finite element models, characterized by precise constitutive models including high-order and high-density mesh techniques. In this study, we introduce a novel numerical technique that enhances the results obtained from coarse mesh finite element models to provide accuracy comparable to that of fine mesh finite element models while maintaining a relatively low computational cost. Introduced in this study is a method by which the computational expense required to solve linear and nonlinear constitutive models, commonly used in heart valve mechanics simulations, is reduced while continuing to account for large and infinitesimal deformations. This continuum model is developed based on the least square algorithm procedure coupled with the finite difference method adhering to the assumption that the components of the strain tensor are available at all nodes of the finite element mesh model. The suggested numerical technique is easy to implement, practically efficient, and requires less computational time compared to currently available commercial finite element packages such as ANSYS and/or ABAQUS.

An iterative method for hydrodynamic interactions in Brownian dynamics simulations of polymer dynamics

NASA Astrophysics Data System (ADS)

Miao, Linling; Young, Charles D.; Sing, Charles E.

2017-07-01

Brownian Dynamics (BD) simulations are a standard tool for understanding the dynamics of polymers in and out of equilibrium. Quantitative comparison can be made to rheological measurements of dilute polymer solutions, as well as direct visual observations of fluorescently labeled DNA. The primary computational challenge with BD is the expensive calculation of hydrodynamic interactions (HI), which are necessary to capture physically realistic dynamics. The full HI calculation, performed via a Cholesky decomposition every time step, scales with the length of the polymer as O(N3). This limits the calculation to a few hundred simulated particles. A number of approximations in the literature can lower this scaling to O(N2 - N2.25), and explicit solvent methods scale as O(N); however both incur a significant constant per-time step computational cost. Despite this progress, there remains a need for new or alternative methods of calculating hydrodynamic interactions; large polymer chains or semidilute polymer solutions remain computationally expensive. In this paper, we introduce an alternative method for calculating approximate hydrodynamic interactions. Our method relies on an iterative scheme to establish self-consistency between a hydrodynamic matrix that is averaged over simulation and the hydrodynamic matrix used to run the simulation. Comparison to standard BD simulation and polymer theory results demonstrates that this method quantitatively captures both equilibrium and steady-state dynamics after only a few iterations. The use of an averaged hydrodynamic matrix allows the computationally expensive Brownian noise calculation to be performed infrequently, so that it is no longer the bottleneck of the simulation calculations. We also investigate limitations of this conformational averaging approach in ring polymers.

Automatic Data Filter Customization Using a Genetic Algorithm

NASA Technical Reports Server (NTRS)

Mandrake, Lukas

2013-01-01

This work predicts whether a retrieval algorithm will usefully determine CO2 concentration from an input spectrum of GOSAT (Greenhouse Gases Observing Satellite). This was done to eliminate needless runtime on atmospheric soundings that would never yield useful results. A space of 50 dimensions was examined for predictive power on the final CO2 results. Retrieval algorithms are frequently expensive to run, and wasted effort defeats requirements and expends needless resources. This algorithm could be used to help predict and filter unneeded runs in any computationally expensive regime. Traditional methods such as the Fischer discriminant analysis and decision trees can attempt to predict whether a sounding will be properly processed. However, this work sought to detect a subsection of the dimensional space that can be simply filtered out to eliminate unwanted runs. LDAs (linear discriminant analyses) and other systems examine the entire data and judge a "best fit," giving equal weight to complex and problematic regions as well as simple, clear-cut regions. In this implementation, a genetic space of "left" and "right" thresholds outside of which all data are rejected was defined. These left/right pairs are created for each of the 50 input dimensions. A genetic algorithm then runs through countless potential filter settings using a JPL computer cluster, optimizing the tossed-out data s yield (proper vs. improper run removal) and number of points tossed. This solution is robust to an arbitrary decision boundary within the data and avoids the global optimization problem of whole-dataset fitting using LDA or decision trees. It filters out runs that would not have produced useful CO2 values to save needless computation. This would be an algorithmic preprocessing improvement to any computationally expensive system.

Computing LORAN time differences with an HP-25 hand calculator

NASA Technical Reports Server (NTRS)

Jones, E. D.

1978-01-01

A program for an HP-25 or HP-25C hand calculator that will calculate accurate LORAN-C time differences is described and presented. The program is most useful when checking the accuracy of a LORAN-C receiver at a known latitude and longitude without the aid of an expensive computer. It can thus be used to compute time differences for known landmarks or waypoints to predict in advance the approximate readings during a navigation mission.

Design Trade-off Between Performance and Fault-Tolerance of Space Onboard Computers

NASA Astrophysics Data System (ADS)

Gorbunov, M. S.; Antonov, A. A.

2017-01-01

It is well known that there is a trade-off between performance and power consumption in onboard computers. The fault-tolerance is another important factor affecting performance, chip area and power consumption. Involving special SRAM cells and error-correcting codes is often too expensive with relation to the performance needed. We discuss the possibility of finding the optimal solutions for modern onboard computer for scientific apparatus focusing on multi-level cache memory design.

Medical Malpractice Claims in Radiation Oncology: A Population-Based Study 1985-2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marshall, Deborah C.; Punglia, Rinaa S.; Fox, Dov

Purpose: The purpose of this study was to determine trends in radiation oncology malpractice claims and expenses during the last 28 years and to compare radiation oncology malpractice claims to those of other specialties. Methods and Materials: We performed a retrospective analysis of closed malpractice claims filed from 1985 to 2012, collected by a nationwide medical liability insurance trade association. We analyzed characteristics and trends among closed claims, indemnity payments (payments to plaintiff), and litigation expenses. We also compared radiation oncology malpractice claims to those of 21 other medical specialties. Time series dollar amounts were adjusted for inflation (2012 was themore » index year). Results: There were 1517 closed claims involving radiation oncology, of which 342 (22.5%) were paid. Average and median indemnity payments were $276,792 and $122,500, respectively, ranking fifth and eighth, respectively, among the 22 specialty groups. Linear regression modeling of time trends showed decreasing total numbers of claims (β = −1.96 annually, P=.003), increasing average litigation expenses paid (β = +$1472 annually, P≤.001), and no significant changes in average indemnity payments (β = −$681, P=.89). Conclusions: Medical professional liability claims filed against radiation oncologists are not common and have declined in recent years. However, indemnity payments in radiation oncology are large relative to those of many other specialties. In recent years, the average indemnity payment has been stable, whereas litigation expenses have increased.« less

Transportation Annual Survey 1998

DOT National Transportation Integrated Search

1999-12-22

The purpose of this annual survey is to provide national estimates of revenue, expenses, and vehicle fleet inventories for commercial motor freight transportation and public warehousing service industries. The United States Code, Title 13, authorizes...

2 CFR 200.442 - Fund raising and investment management costs.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., including financial campaigns, endowment drives, solicitation of gifts and bequests, and similar expenses incurred to raise capital or obtain contributions are unallowable. Fund raising costs for the purposes of...

Sustaining Moore's law with 3D chips

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeBenedictis, Erik P.; Badaroglu, Mustafa; Chen, An

Here, rather than continue the expensive and time-consuming quest for transistor replacement, the authors argue that 3D chips coupled with new computer architectures can keep Moore's law on its traditional scaling path.

Sustaining Moore's law with 3D chips

DOE PAGES

DeBenedictis, Erik P.; Badaroglu, Mustafa; Chen, An; ...

2017-08-01

Here, rather than continue the expensive and time-consuming quest for transistor replacement, the authors argue that 3D chips coupled with new computer architectures can keep Moore's law on its traditional scaling path.

Computer programs: Information retrieval and data analysis, a compilation

NASA Technical Reports Server (NTRS)

1972-01-01

The items presented in this compilation are divided into two sections. Section one treats of computer usage devoted to the retrieval of information that affords the user rapid entry into voluminous collections of data on a selective basis. Section two is a more generalized collection of computer options for the user who needs to take such data and reduce it to an analytical study within a specific discipline. These programs, routines, and subroutines should prove useful to users who do not have access to more sophisticated and expensive computer software.

Towards Wearable Cognitive Assistance

DTIC Science & Technology

2013-12-01

ABSTRACT unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 Keywords: mobile computing, cloud...It presents a muli-tiered mobile system architecture that offers tight end-to-end latency bounds on compute-intensive cognitive assistance...to an entire neighborhood or an entire city is extremely expensive and time-consuming. Physical infrastructure in public spaces tends to evolve very

Behavior-Based Fault Monitoring

DTIC Science & Technology

1990-12-03

processor targeted for avionics and space applications . It appears that the signature monitoring technique can be extended to detect computer viruses as...most common approach is structural duplication. Although effective, duplication is too expensive for all but a few applications . Redundancy can also be...Signature Monitoring and Encryption," Int. Conf. on Dependable Computing for Critical Applications , August 1989. 7. K.D. Wilken and J.P. Shen

Artificial Intelligence Methods: Challenge in Computer Based Polymer Design

NASA Astrophysics Data System (ADS)

Rusu, Teodora; Pinteala, Mariana; Cartwright, Hugh

2009-08-01

This paper deals with the use of Artificial Intelligence Methods (AI) in the design of new molecules possessing desired physical, chemical and biological properties. This is an important and difficult problem in the chemical, material and pharmaceutical industries. Traditional methods involve a laborious and expensive trial-and-error procedure, but computer-assisted approaches offer many advantages in the automation of molecular design.

Gaussian process regression of chirplet decomposed ultrasonic B-scans of a simulated design case

NASA Astrophysics Data System (ADS)

Wertz, John; Homa, Laura; Welter, John; Sparkman, Daniel; Aldrin, John

2018-04-01

The US Air Force seeks to implement damage tolerant lifecycle management of composite structures. Nondestructive characterization of damage is a key input to this framework. One approach to characterization is model-based inversion of the ultrasonic response from damage features; however, the computational expense of modeling the ultrasonic waves within composites is a major hurdle to implementation. A surrogate forward model with sufficient accuracy and greater computational efficiency is therefore critical to enabling model-based inversion and damage characterization. In this work, a surrogate model is developed on the simulated ultrasonic response from delamination-like structures placed at different locations within a representative composite layup. The resulting B-scans are decomposed via the chirplet transform, and a Gaussian process model is trained on the chirplet parameters. The quality of the surrogate is tested by comparing the B-scan for a delamination configuration not represented within the training data set. The estimated B-scan has a maximum error of ˜15% for an estimated reduction in computational runtime of ˜95% for 200 function calls. This considerable reduction in computational expense makes full 3D characterization of impact damage tractable.

Quadratic String Method for Locating Instantons in Tunneling Splitting Calculations.

PubMed

Cvitaš, Marko T

2018-03-13

The ring-polymer instanton (RPI) method is an efficient technique for calculating approximate tunneling splittings in high-dimensional molecular systems. In the RPI method, tunneling splitting is evaluated from the properties of the minimum action path (MAP) connecting the symmetric wells, whereby the extensive sampling of the full potential energy surface of the exact quantum-dynamics methods is avoided. Nevertheless, the search for the MAP is usually the most time-consuming step in the standard numerical procedures. Recently, nudged elastic band (NEB) and string methods, originaly developed for locating minimum energy paths (MEPs), were adapted for the purpose of MAP finding with great efficiency gains [ J. Chem. Theory Comput. 2016 , 12 , 787 ]. In this work, we develop a new quadratic string method for locating instantons. The Euclidean action is minimized by propagating the initial guess (a path connecting two wells) over the quadratic potential energy surface approximated by means of updated Hessians. This allows the algorithm to take many minimization steps between the potential/gradient calls with further reductions in the computational effort, exploiting the smoothness of potential energy surface. The approach is general, as it uses Cartesian coordinates, and widely applicable, with computational effort of finding the instanton usually lower than that of determining the MEP. It can be combined with expensive potential energy surfaces or on-the-fly electronic-structure methods to explore a wide variety of molecular systems.

Probabilistic Prognosis of Non-Planar Fatigue Crack Growth

NASA Technical Reports Server (NTRS)

Leser, Patrick E.; Newman, John A.; Warner, James E.; Leser, William P.; Hochhalter, Jacob D.; Yuan, Fuh-Gwo

2016-01-01

Quantifying the uncertainty in model parameters for the purpose of damage prognosis can be accomplished utilizing Bayesian inference and damage diagnosis data from sources such as non-destructive evaluation or structural health monitoring. The number of samples required to solve the Bayesian inverse problem through common sampling techniques (e.g., Markov chain Monte Carlo) renders high-fidelity finite element-based damage growth models unusable due to prohibitive computation times. However, these types of models are often the only option when attempting to model complex damage growth in real-world structures. Here, a recently developed high-fidelity crack growth model is used which, when compared to finite element-based modeling, has demonstrated reductions in computation times of three orders of magnitude through the use of surrogate models and machine learning. The model is flexible in that only the expensive computation of the crack driving forces is replaced by the surrogate models, leaving the remaining parameters accessible for uncertainty quantification. A probabilistic prognosis framework incorporating this model is developed and demonstrated for non-planar crack growth in a modified, edge-notched, aluminum tensile specimen. Predictions of remaining useful life are made over time for five updates of the damage diagnosis data, and prognostic metrics are utilized to evaluate the performance of the prognostic framework. Challenges specific to the probabilistic prognosis of non-planar fatigue crack growth are highlighted and discussed in the context of the experimental results.

Integrating Cloud-Computing-Specific Model into Aircraft Design

NASA Astrophysics Data System (ADS)

Zhimin, Tian; Qi, Lin; Guangwen, Yang

Cloud Computing is becoming increasingly relevant, as it will enable companies involved in spreading this technology to open the door to Web 3.0. In the paper, the new categories of services introduced will slowly replace many types of computational resources currently used. In this perspective, grid computing, the basic element for the large scale supply of cloud services, will play a fundamental role in defining how those services will be provided. The paper tries to integrate cloud computing specific model into aircraft design. This work has acquired good results in sharing licenses of large scale and expensive software, such as CFD (Computational Fluid Dynamics), UG, CATIA, and so on.

Large Eddy/Reynolds-Averaged Navier-Stokes Simulations of CUBRC Base Heating Experiments

NASA Technical Reports Server (NTRS)

Salazar, Giovanni; Edwards, Jack R.; Amar, Adam J.

2012-01-01

ven with great advances in computational techniques and computing power during recent decades, the modeling of unsteady separated flows, such as those encountered in the wake of a re-entry vehicle, continues to be one of the most challenging problems in CFD. Of most interest to the aerothermodynamics community is accurately predicting transient heating loads on the base of a blunt body, which would result in reduced uncertainties and safety margins when designing a re-entry vehicle. However, the prediction of heat transfer can vary widely depending on the turbulence model employed. Therefore, selecting a turbulence model which realistically captures as much of the flow physics as possible will result in improved results. Reynolds Averaged Navier Stokes (RANS) models have become increasingly popular due to their good performance with attached flows, and the relatively quick turnaround time to obtain results. However, RANS methods cannot accurately simulate unsteady separated wake flows, and running direct numerical simulation (DNS) on such complex flows is currently too computationally expensive. Large Eddy Simulation (LES) techniques allow for the computation of the large eddies, which contain most of the Reynolds stress, while modeling the smaller (subgrid) eddies. This results in models which are more computationally expensive than RANS methods, but not as prohibitive as DNS. By complimenting an LES approach with a RANS model, a hybrid LES/RANS method resolves the larger turbulent scales away from surfaces with LES, and switches to a RANS model inside boundary layers. As pointed out by Bertin et al., this type of hybrid approach has shown a lot of promise for predicting turbulent flows, but work is needed to verify that these models work well in hypersonic flows. The very limited amounts of flight and experimental data available presents an additional challenge for researchers. Recently, a joint study by NASA and CUBRC has focused on collecting heat transfer data on the backshell of a scaled model of the Orion Multi-Purpose Crew Vehicle (MPCV). Heat augmentation effects due to the presence of cavities and RCS jet firings were also investigated. The high quality data produced by this effort presents a new set of data which can be used to assess the performance of CFD methods. In this work, a hybrid LES/RANS model developed at North Carolina State University (NCSU) is used to simulate several runs from these experiments, and evaluate the performance of high fidelity methods as compared to more typical RANS models. .

11 CFR 104.3 - Contents of reports (2 U.S.C. 434(b), 439a).

Code of Federal Regulations, 2010 CFR

2010-01-01

... reporting period, including: currency; balance on deposit in banks, savings and loan institutions, and other... expenditure; (A) As used in 11 CFR 104.3(b)(3), purpose means a brief statement or description of why the... expenses, together with the date, amount and purpose of each expenditure. (A) As used in this paragraph...

Computing technology in the 1980's. [computers

NASA Technical Reports Server (NTRS)

Stone, H. S.

1978-01-01

Advances in computing technology have been led by consistently improving semiconductor technology. The semiconductor industry has turned out ever faster, smaller, and less expensive devices since transistorized computers were first introduced 20 years ago. For the next decade, there appear to be new advances possible, with the rate of introduction of improved devices at least equal to the historic trends. The implication of these projections is that computers will enter new markets and will truly be pervasive in business, home, and factory as their cost diminishes and their computational power expands to new levels. The computer industry as we know it today will be greatly altered in the next decade, primarily because the raw computer system will give way to computer-based turn-key information and control systems.

Medicare program; clarification of Medicare's accrual basis of accounting policy--HCFA. Final rule.

PubMed

1995-06-27

This final rule revises the Medicare regulations to clarify the concept of "accrual basis of accounting" to indicate that expenses must be incurred by a provider of health care services before Medicare will pay its share of those expenses. This rule does not signify a change in policy but, rather, incorporates into the regulations Medicare's longstanding policy regarding the circumstances under which we recognize, for the purposes of program payment, a provider's claim for costs for which it has not actually expended funds during the current cost reporting period.

Switching from computer to microcomputer architecture education

NASA Astrophysics Data System (ADS)

Bolanakis, Dimosthenis E.; Kotsis, Konstantinos T.; Laopoulos, Theodore

2010-03-01

In the last decades, the technological and scientific evolution of the computing discipline has been widely affecting research in software engineering education, which nowadays advocates more enlightened and liberal ideas. This article reviews cross-disciplinary research on a computer architecture class in consideration of its switching to microcomputer architecture. The authors present their strategies towards a successful crossing of boundaries between engineering disciplines. This communication aims at providing a different aspect on professional courses that are, nowadays, addressed at the expense of traditional courses.

A computationally efficient parallel Levenberg-Marquardt algorithm for highly parameterized inverse model analyses

NASA Astrophysics Data System (ADS)

Lin, Youzuo; O'Malley, Daniel; Vesselinov, Velimir V.

2016-09-01

Inverse modeling seeks model parameters given a set of observations. However, for practical problems because the number of measurements is often large and the model parameters are also numerous, conventional methods for inverse modeling can be computationally expensive. We have developed a new, computationally efficient parallel Levenberg-Marquardt method for solving inverse modeling problems with a highly parameterized model space. Levenberg-Marquardt methods require the solution of a linear system of equations which can be prohibitively expensive to compute for moderate to large-scale problems. Our novel method projects the original linear problem down to a Krylov subspace such that the dimensionality of the problem can be significantly reduced. Furthermore, we store the Krylov subspace computed when using the first damping parameter and recycle the subspace for the subsequent damping parameters. The efficiency of our new inverse modeling algorithm is significantly improved using these computational techniques. We apply this new inverse modeling method to invert for random transmissivity fields in 2-D and a random hydraulic conductivity field in 3-D. Our algorithm is fast enough to solve for the distributed model parameters (transmissivity) in the model domain. The algorithm is coded in Julia and implemented in the MADS computational framework (http://mads.lanl.gov). By comparing with Levenberg-Marquardt methods using standard linear inversion techniques such as QR or SVD methods, our Levenberg-Marquardt method yields a speed-up ratio on the order of ˜101 to ˜102 in a multicore computational environment. Therefore, our new inverse modeling method is a powerful tool for characterizing subsurface heterogeneity for moderate to large-scale problems.

47 CFR 69.401 - Direct expenses.

Code of Federal Regulations, 2010 CFR

2010-10-01

... elements in the same proportions as the combined investment in COE, IOT, and C&WF apportioned to each... shall be deemed to be associated with § 69.303(b) IOT investment for purposes of the apportionment...

47 CFR 69.401 - Direct expenses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... elements in the same proportions as the combined investment in COE, IOT, and C&WF apportioned to each... shall be deemed to be associated with § 69.303(b) IOT investment for purposes of the apportionment...

47 CFR 69.401 - Direct expenses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... elements in the same proportions as the combined investment in COE, IOT, and C&WF apportioned to each... shall be deemed to be associated with § 69.303(b) IOT investment for purposes of the apportionment...

47 CFR 69.401 - Direct expenses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... elements in the same proportions as the combined investment in COE, IOT, and C&WF apportioned to each... shall be deemed to be associated with § 69.303(b) IOT investment for purposes of the apportionment...

47 CFR 69.401 - Direct expenses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... elements in the same proportions as the combined investment in COE, IOT, and C&WF apportioned to each... shall be deemed to be associated with § 69.303(b) IOT investment for purposes of the apportionment...

Digital video technology, today and tomorrow

NASA Astrophysics Data System (ADS)

Liberman, J.

1994-10-01

Digital video is probably computing's fastest moving technology today. Just three years ago, the zenith of digital video technology on the PC was the successful marriage of digital text and graphics with analog audio and video by means of expensive analog laser disc players and video overlay boards. The state of the art involves two different approaches to fully digital video on computers: hardware-assisted and software-only solutions.

A fast CT reconstruction scheme for a general multi-core PC.

PubMed

Zeng, Kai; Bai, Erwei; Wang, Ge

2007-01-01

Expensive computational cost is a severe limitation in CT reconstruction for clinical applications that need real-time feedback. A primary example is bolus-chasing computed tomography (CT) angiography (BCA) that we have been developing for the past several years. To accelerate the reconstruction process using the filtered backprojection (FBP) method, specialized hardware or graphics cards can be used. However, specialized hardware is expensive and not flexible. The graphics processing unit (GPU) in a current graphic card can only reconstruct images in a reduced precision and is not easy to program. In this paper, an acceleration scheme is proposed based on a multi-core PC. In the proposed scheme, several techniques are integrated, including utilization of geometric symmetry, optimization of data structures, single-instruction multiple-data (SIMD) processing, multithreaded computation, and an Intel C++ compilier. Our scheme maintains the original precision and involves no data exchange between the GPU and CPU. The merits of our scheme are demonstrated in numerical experiments against the traditional implementation. Our scheme achieves a speedup of about 40, which can be further improved by several folds using the latest quad-core processors.

A Fast CT Reconstruction Scheme for a General Multi-Core PC

PubMed Central

Zeng, Kai; Bai, Erwei; Wang, Ge

2007-01-01

Expensive computational cost is a severe limitation in CT reconstruction for clinical applications that need real-time feedback. A primary example is bolus-chasing computed tomography (CT) angiography (BCA) that we have been developing for the past several years. To accelerate the reconstruction process using the filtered backprojection (FBP) method, specialized hardware or graphics cards can be used. However, specialized hardware is expensive and not flexible. The graphics processing unit (GPU) in a current graphic card can only reconstruct images in a reduced precision and is not easy to program. In this paper, an acceleration scheme is proposed based on a multi-core PC. In the proposed scheme, several techniques are integrated, including utilization of geometric symmetry, optimization of data structures, single-instruction multiple-data (SIMD) processing, multithreaded computation, and an Intel C++ compilier. Our scheme maintains the original precision and involves no data exchange between the GPU and CPU. The merits of our scheme are demonstrated in numerical experiments against the traditional implementation. Our scheme achieves a speedup of about 40, which can be further improved by several folds using the latest quad-core processors. PMID:18256731

25 CFR 700.163 - Expenses in searching for replacement location-nonresidential moves.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., including— (a) Transportation computed at prevailing federal per diem and mileage allowance schedules; meals and lodging away from home; (b) Time spent searching, based on reasonable earnings; (c) Fees paid to a...

25 CFR 700.163 - Expenses in searching for replacement location-nonresidential moves.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., including— (a) Transportation computed at prevailing federal per diem and mileage allowance schedules; meals and lodging away from home; (b) Time spent searching, based on reasonable earnings; (c) Fees paid to a...

SIMULATING ATMOSPHERIC EXPOSURE USING AN INNOVATIVE METEOROLOGICAL SAMPLING SCHEME

EPA Science Inventory

Multimedia Risk assessments require the temporal integration of atmospheric concentration and deposition estimates with other media modules. However, providing an extended time series of estimates is computationally expensive. An alternative approach is to substitute long-ter...

47 CFR 54.639 - Ineligible expenses.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., including the following: i. Computers, including servers, and related hardware (e.g., printers, scanners, laptops), unless used exclusively for network management, maintenance, or other network operations; ii... installation/construction; marketing studies, marketing activities, or outreach to potential network members...

47 CFR 54.639 - Ineligible expenses.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., including the following: i. Computers, including servers, and related hardware (e.g., printers, scanners, laptops), unless used exclusively for network management, maintenance, or other network operations; ii... installation/construction; marketing studies, marketing activities, or outreach to potential network members...

Inner Space Perturbation Theory in Matrix Product States: Replacing Expensive Iterative Diagonalization.

PubMed

Ren, Jiajun; Yi, Yuanping; Shuai, Zhigang

2016-10-11

We propose an inner space perturbation theory (isPT) to replace the expensive iterative diagonalization in the standard density matrix renormalization group theory (DMRG). The retained reduced density matrix eigenstates are partitioned into the active and secondary space. The first-order wave function and the second- and third-order energies are easily computed by using one step Davidson iteration. Our formulation has several advantages including (i) keeping a balance between the efficiency and accuracy, (ii) capturing more entanglement with the same amount of computational time, (iii) recovery of the standard DMRG when all the basis states belong to the active space. Numerical examples for the polyacenes and periacene show that the efficiency gain is considerable and the accuracy loss due to the perturbation treatment is very small, when half of the total basis states belong to the active space. Moreover, the perturbation calculations converge in all our numerical examples.

Multi-chain Markov chain Monte Carlo methods for computationally expensive models

NASA Astrophysics Data System (ADS)

Huang, M.; Ray, J.; Ren, H.; Hou, Z.; Bao, J.

2017-12-01

Markov chain Monte Carlo (MCMC) methods are used to infer model parameters from observational data. The parameters are inferred as probability densities, thus capturing estimation error due to sparsity of the data, and the shortcomings of the model. Multiple communicating chains executing the MCMC method have the potential to explore the parameter space better, and conceivably accelerate the convergence to the final distribution. We present results from tests conducted with the multi-chain method to show how the acceleration occurs i.e., for loose convergence tolerances, the multiple chains do not make much of a difference. The ensemble of chains also seems to have the ability to accelerate the convergence of a few chains that might start from suboptimal starting points. Finally, we show the performance of the chains in the estimation of O(10) parameters using computationally expensive forward models such as the Community Land Model, where the sampling burden is distributed over multiple chains.

On Using Surrogates with Genetic Programming.

PubMed

Hildebrandt, Torsten; Branke, Jürgen

2015-01-01

One way to accelerate evolutionary algorithms with expensive fitness evaluations is to combine them with surrogate models. Surrogate models are efficiently computable approximations of the fitness function, derived by means of statistical or machine learning techniques from samples of fully evaluated solutions. But these models usually require a numerical representation, and therefore cannot be used with the tree representation of genetic programming (GP). In this paper, we present a new way to use surrogate models with GP. Rather than using the genotype directly as input to the surrogate model, we propose using a phenotypic characterization. This phenotypic characterization can be computed efficiently and allows us to define approximate measures of equivalence and similarity. Using a stochastic, dynamic job shop scenario as an example of simulation-based GP with an expensive fitness evaluation, we show how these ideas can be used to construct surrogate models and improve the convergence speed and solution quality of GP.

Coded-aperture Compton camera for gamma-ray imaging

NASA Astrophysics Data System (ADS)

Farber, Aaron M.

This dissertation describes the development of a novel gamma-ray imaging system concept and presents results from Monte Carlo simulations of the new design. Current designs for large field-of-view gamma cameras suitable for homeland security applications implement either a coded aperture or a Compton scattering geometry to image a gamma-ray source. Both of these systems require large, expensive position-sensitive detectors in order to work effectively. By combining characteristics of both of these systems, a new design can be implemented that does not require such expensive detectors and that can be scaled down to a portable size. This new system has significant promise in homeland security, astronomy, botany and other fields, while future iterations may prove useful in medical imaging, other biological sciences and other areas, such as non-destructive testing. A proof-of-principle study of the new gamma-ray imaging system has been performed by Monte Carlo simulation. Various reconstruction methods have been explored and compared. General-Purpose Graphics-Processor-Unit (GPGPU) computation has also been incorporated. The resulting code is a primary design tool for exploring variables such as detector spacing, material selection and thickness and pixel geometry. The advancement of the system from a simple 1-dimensional simulation to a full 3-dimensional model is described. Methods of image reconstruction are discussed and results of simulations consisting of both a 4 x 4 and a 16 x 16 object space mesh have been presented. A discussion of the limitations and potential areas of further study is also presented.

Numerical Analysis of Crack Tip Plasticity and History Effects under Mixed Mode Conditions

NASA Astrophysics Data System (ADS)

Lopez-Crespo, Pablo; Pommier, Sylvie

The plastic behaviour in the crack tip region has a strong influence on the fatigue life of engineering components. In general, residual stresses developed as a consequence of the plasticity being constrained around the crack tip have a significant role on both the direction of crack propagation and the propagation rate. Finite element methods (FEM) are commonly employed in order to model plasticity. However, if millions of cycles need to be modelled to predict the fatigue behaviour of a component, the method becomes computationally too expensive. By employing a multiscale approach, very precise analyses computed by FEM can be brought to a global scale. The data generated using the FEM enables us to identify a global cyclic elastic-plastic model for the crack tip region. Once this model is identified, it can be employed directly, with no need of additional FEM computations, resulting in fast computations. This is done by partitioning local displacement fields computed by FEM into intensity factors (global data) and spatial fields. A Karhunen-Loeve algorithm developed for image processing was employed for this purpose. In addition, the partitioning is done such as to distinguish into elastic and plastic components. Each of them is further divided into opening mode and shear mode parts. The plastic flow direction was determined with the above approach on a centre cracked panel subjected to a wide range of mixed-mode loading conditions. It was found to agree well with the maximum tangential stress criterion developed by Erdogan and Sih, provided that the loading direction is corrected for residual stresses. In this approach, residual stresses are measured at the global scale through internal intensity factors.

Nonlinear Model Predictive Control for Cooperative Control and Estimation

NASA Astrophysics Data System (ADS)

Ru, Pengkai

Recent advances in computational power have made it possible to do expensive online computations for control systems. It is becoming more realistic to perform computationally intensive optimization schemes online on systems that are not intrinsically stable and/or have very small time constants. Being one of the most important optimization based control approaches, model predictive control (MPC) has attracted a lot of interest from the research community due to its natural ability to incorporate constraints into its control formulation. Linear MPC has been well researched and its stability can be guaranteed in the majority of its application scenarios. However, one issue that still remains with linear MPC is that it completely ignores the system's inherent nonlinearities thus giving a sub-optimal solution. On the other hand, if achievable, nonlinear MPC, would naturally yield a globally optimal solution and take into account all the innate nonlinear characteristics. While an exact solution to a nonlinear MPC problem remains extremely computationally intensive, if not impossible, one might wonder if there is a middle ground between the two. We tried to strike a balance in this dissertation by employing a state representation technique, namely, the state dependent coefficient (SDC) representation. This new technique would render an improved performance in terms of optimality compared to linear MPC while still keeping the problem tractable. In fact, the computational power required is bounded only by a constant factor of the completely linearized MPC. The purpose of this research is to provide a theoretical framework for the design of a specific kind of nonlinear MPC controller and its extension into a general cooperative scheme. The controller is designed and implemented on quadcopter systems.

Automated serum chloride analysis using the Apple computer

PubMed Central

Taylor, Paul J.; Bouska, Rosalie A.

1988-01-01

Chloride analysis employing a coulometric technique is a wellestablished method. However, the equipment needed is specialized and somewhat expensive. The purpose of this paper is to report the development of the hardware and software to perform this analysis using an Apple computer to control the coulometric titration, as well as to automate it and to print out the results. The Apple computer is used to control the flow of current in a circuit, which includes silver and platinum electrodes where the following reactions take place: A g → A g + + l e −    ( at silver anode ) 2 H 2 O + 2 e − → 2 O H − + H 2    ( at platinum cathode ) The generated silver ions then react with the chloride ion in the sample to form AgCl. A g + + C l − → A g C l ( s ) When all of the chloride ion has been titrated, the concentration of silver ions in solution increases rapidly, which causes an increase in the current between two silver microelectrodes. This current is converted to a voltage and amplified by a simple circuit. This voltage is read by the analogue-to-digital converter. The computer stops the titration and calculates the chloride ion content of the sample. Thus, the computer controls the apparatus, records the data, and reacts to the data to terminate the analyses and prints out the results and messages to the analyst. Analysis of standards and reference sera indicate the method is rapid, accurate and precise. Application of this apparatus as a teaching aidfor electronics to chemistry and medical students is also described. PMID:18925182

Space-filling designs for computer experiments: A review

DOE PAGES

Joseph, V. Roshan

2016-01-29

Improving the quality of a product/process using a computer simulator is a much less expensive option than the real physical testing. However, simulation using computationally intensive computer models can be time consuming and therefore, directly doing the optimization on the computer simulator can be infeasible. Experimental design and statistical modeling techniques can be used for overcoming this problem. This article reviews experimental designs known as space-filling designs that are suitable for computer simulations. In the review, a special emphasis is given for a recently developed space-filling design called maximum projection design. Furthermore, its advantages are illustrated using a simulation conductedmore » for optimizing a milling process.« less

Space-filling designs for computer experiments: A review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joseph, V. Roshan

Improving the quality of a product/process using a computer simulator is a much less expensive option than the real physical testing. However, simulation using computationally intensive computer models can be time consuming and therefore, directly doing the optimization on the computer simulator can be infeasible. Experimental design and statistical modeling techniques can be used for overcoming this problem. This article reviews experimental designs known as space-filling designs that are suitable for computer simulations. In the review, a special emphasis is given for a recently developed space-filling design called maximum projection design. Furthermore, its advantages are illustrated using a simulation conductedmore » for optimizing a milling process.« less

A computer-based physics laboratory apparatus: Signal generator software

NASA Astrophysics Data System (ADS)

Thanakittiviroon, Tharest; Liangrocapart, Sompong

2005-09-01

This paper describes a computer-based physics laboratory apparatus to replace expensive instruments such as high-precision signal generators. This apparatus uses a sound card in a common personal computer to give sinusoidal signals with an accurate frequency that can be programmed to give different frequency signals repeatedly. An experiment on standing waves on an oscillating string uses this apparatus. In conjunction with interactive lab manuals, which have been developed using personal computers in our university, we achieve a complete set of low-cost, accurate, and easy-to-use equipment for teaching a physics laboratory.

Analytical Chemistry for Homeland Defense and National Security

DOE Office of Scientific and Technical Information (OSTI.GOV)

S.Randolph Long; Dan rock; Gary Eiceman

2002-08-18

The budget was requested to support speaker expenses to attend and speak in the day long symposium at the ACS meeting. The purpose of the symposium was to encourage analytical chemists to contribute to national security.

An approach to the design of wide-angle optical systems with special illumination and IFOV requirements

NASA Astrophysics Data System (ADS)

Pravdivtsev, Andrey V.

2012-06-01

The article presents the approach to the design wide-angle optical systems with special illumination and instantaneous field of view (IFOV) requirements. The unevenness of illumination reduces the dynamic range of the system, which negatively influence on the system ability to perform their task. The result illumination on the detector depends among other factors from the IFOV changes. It is also necessary to consider IFOV in the synthesis of data processing algorithms, as it directly affects to the potential "signal/background" ratio for the case of statistically homogeneous backgrounds. A numerical-analytical approach that simplifies the design of wideangle optical systems with special illumination and IFOV requirements is presented. The solution can be used for optical systems which field of view greater than 180 degrees. Illumination calculation in optical CAD is based on computationally expensive tracing of large number of rays. The author proposes to use analytical expression for some characteristics which illumination depends on. The rest characteristic are determined numerically in calculation with less computationally expensive operands, the calculation performs not every optimization step. The results of analytical calculation inserts in the merit function of optical CAD optimizer. As a result we reduce the optimizer load, since using less computationally expensive operands. It allows reducing time and resources required to develop a system with the desired characteristics. The proposed approach simplifies the creation and understanding of the requirements for the quality of the optical system, reduces the time and resources required to develop an optical system, and allows creating more efficient EOS.

Attitude to the Use of the Computer for Learning Biological Concepts and Achievement of Students in an Environment Dominated by Indigenous Technology.

ERIC Educational Resources Information Center

Jegede, Olugbemiro J.; And Others

The use of computers to facilitate learning is yet to make an appreciable in-road into the teaching-learning process in most developing Third World countries. The purchase cost and maintenance expenses of the equipment are the major inhibiting factors related to adoption of this high technology in these countries. This study investigated: (1) the…

Analysis of Disaster Preparedness Planning Measures in DoD Computer Facilities

DTIC Science & Technology

1993-09-01

city, stae, aod ZP code) 10 Source of Funding Numbers SProgram Element No lProject No ITask No lWork Unit Accesion I 11 Title include security...Computer Disaster Recovery .... 13 a. PC and LAN Lessons Learned . . ..... 13 2. Distributed Architectures . . . .. . 14 3. Backups...amount of expense, but no client problems." (Leeke, 1993, p. 8) 2. Distributed Architectures The majority of operations that were disrupted by the

Network Support for Group Coordination

DTIC Science & Technology

2000-01-01

telecommuting and ubiquitous computing [40], the advent of networked multimedia, and less expensive technology have shifted telecollaboration into...of Computer Engineering,Santa Cruz,CA,95064 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/ MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10...participants A and B, the payoff structure for choosing two actions i and j is P = Aij + Bij . If P = 0, then the interaction is called a zero -sum game, and

High-Fidelity Simulations of Electromagnetic Propagation and RF Communication Systems

DTIC Science & Technology

2017-05-01

addition to high -fidelity RF propagation modeling, lower-fidelity mod- els, which are less computationally burdensome, are available via a C++ API...expensive to perform, requiring roughly one hour of computer time with 36 available cores and ray tracing per- formed by a single high -end GPU...ER D C TR -1 7- 2 Military Engineering Applied Research High -Fidelity Simulations of Electromagnetic Propagation and RF Communication

Development of Multidisciplinary, Multifidelity Analysis, Integration, and Optimization of Aerospace Vehicles

DTIC Science & Technology

2010-02-27

investigated in more detail. The intermediate level of fidelity, though more expensive, is then used to refine the analysis , add geometric detail, and...design stage is used to further refine the analysis , narrowing the design to a handful of options. Figure 1. Integrated Hierarchical Framework. In...computational structural and computational fluid modeling. For the structural analysis tool we used McIntosh Structural Dynamics’ finite element code CNEVAL

COST FUNCTION STUDIES FOR POWER REACTORS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heestand, J.; Wos, L.T.

1961-11-01

A function to evaluate the cost of electricity produced by a nuclear power reactor was developed. The basic equation, revenue = capital charges + profit + operating expenses, was expanded in terms of various cost parameters to enable analysis of multiregion nuclear reactors with uranium and/or plutonium for fuel. A corresponding IBM 704 computer program, which will compute either the price of electricity or the value of plutonium, is presented in detail. (auth)

Sensitivity analysis and approximation methods for general eigenvalue problems

NASA Technical Reports Server (NTRS)

Murthy, D. V.; Haftka, R. T.

1986-01-01

Optimization of dynamic systems involving complex non-hermitian matrices is often computationally expensive. Major contributors to the computational expense are the sensitivity analysis and reanalysis of a modified design. The present work seeks to alleviate this computational burden by identifying efficient sensitivity analysis and approximate reanalysis methods. For the algebraic eigenvalue problem involving non-hermitian matrices, algorithms for sensitivity analysis and approximate reanalysis are classified, compared and evaluated for efficiency and accuracy. Proper eigenvector normalization is discussed. An improved method for calculating derivatives of eigenvectors is proposed based on a more rational normalization condition and taking advantage of matrix sparsity. Important numerical aspects of this method are also discussed. To alleviate the problem of reanalysis, various approximation methods for eigenvalues are proposed and evaluated. Linear and quadratic approximations are based directly on the Taylor series. Several approximation methods are developed based on the generalized Rayleigh quotient for the eigenvalue problem. Approximation methods based on trace theorem give high accuracy without needing any derivatives. Operation counts for the computation of the approximations are given. General recommendations are made for the selection of appropriate approximation technique as a function of the matrix size, number of design variables, number of eigenvalues of interest and the number of design points at which approximation is sought.

Fast perceptual image hash based on cascade algorithm

NASA Astrophysics Data System (ADS)

Ruchay, Alexey; Kober, Vitaly; Yavtushenko, Evgeniya

2017-09-01

In this paper, we propose a perceptual image hash algorithm based on cascade algorithm, which can be applied in image authentication, retrieval, and indexing. Image perceptual hash uses for image retrieval in sense of human perception against distortions caused by compression, noise, common signal processing and geometrical modifications. The main disadvantage of perceptual hash is high time expenses. In the proposed cascade algorithm of image retrieval initializes with short hashes, and then a full hash is applied to the processed results. Computer simulation results show that the proposed hash algorithm yields a good performance in terms of robustness, discriminability, and time expenses.

Analysis of Commuter Rail Costs and Cost Allocation Methods

DOT National Transportation Integrated Search

1983-07-01

The report addresses the issues of commuter rail service costs and the compensation methods used to allocate railroad expenses to the commuter service function. The report consists of six sections. Section 1 describes the study purpose, scope, method...

47 CFR 36.222 - Nonoperating income and expenses-Account 7300.

Code of Federal Regulations, 2011 CFR

2011-10-01

... SERVICES JURISDICTIONAL SEPARATIONS PROCEDURES; STANDARD PROCEDURES FOR SEPARATING TELECOMMUNICATIONS... charitable, social or community welfare purposes, employee activities, membership dues and fees in service clubs, community welfare association and similar organizations. (c) The portion reflecting allowance for...

47 CFR 36.222 - Nonoperating income and expenses-Account 7300.

Code of Federal Regulations, 2013 CFR

2013-10-01

... SERVICES JURISDICTIONAL SEPARATIONS PROCEDURES; STANDARD PROCEDURES FOR SEPARATING TELECOMMUNICATIONS... charitable, social or community welfare purposes, employee activities, membership dues and fees in service clubs, community welfare association and similar organizations. (c) The portion reflecting allowance for...

47 CFR 36.222 - Nonoperating income and expenses-Account 7300.

Code of Federal Regulations, 2014 CFR

2014-10-01

... SERVICES JURISDICTIONAL SEPARATIONS PROCEDURES; STANDARD PROCEDURES FOR SEPARATING TELECOMMUNICATIONS... charitable, social or community welfare purposes, employee activities, membership dues and fees in service clubs, community welfare association and similar organizations. (c) The portion reflecting allowance for...

47 CFR 36.222 - Nonoperating income and expenses-Account 7300.

Code of Federal Regulations, 2012 CFR

2012-10-01

... SERVICES JURISDICTIONAL SEPARATIONS PROCEDURES; STANDARD PROCEDURES FOR SEPARATING TELECOMMUNICATIONS... charitable, social or community welfare purposes, employee activities, membership dues and fees in service clubs, community welfare association and similar organizations. (c) The portion reflecting allowance for...

Fast-Track Building.

ERIC Educational Resources Information Center

Dolan, Thomas G.

2002-01-01

Describes Clark County, Nevada's use of prototype school designs to respond to its rapidly growing school population. The purpose of the prototypes is to simplify designs so that schools can be built quickly and minimize the time and expense that comes with variations. (EV)

A computationally efficient parallel Levenberg-Marquardt algorithm for highly parameterized inverse model analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Youzuo; O'Malley, Daniel; Vesselinov, Velimir V.

Inverse modeling seeks model parameters given a set of observations. However, for practical problems because the number of measurements is often large and the model parameters are also numerous, conventional methods for inverse modeling can be computationally expensive. We have developed a new, computationally-efficient parallel Levenberg-Marquardt method for solving inverse modeling problems with a highly parameterized model space. Levenberg-Marquardt methods require the solution of a linear system of equations which can be prohibitively expensive to compute for moderate to large-scale problems. Our novel method projects the original linear problem down to a Krylov subspace, such that the dimensionality of themore » problem can be significantly reduced. Furthermore, we store the Krylov subspace computed when using the first damping parameter and recycle the subspace for the subsequent damping parameters. The efficiency of our new inverse modeling algorithm is significantly improved using these computational techniques. We apply this new inverse modeling method to invert for random transmissivity fields in 2D and a random hydraulic conductivity field in 3D. Our algorithm is fast enough to solve for the distributed model parameters (transmissivity) in the model domain. The algorithm is coded in Julia and implemented in the MADS computational framework (http://mads.lanl.gov). By comparing with Levenberg-Marquardt methods using standard linear inversion techniques such as QR or SVD methods, our Levenberg-Marquardt method yields a speed-up ratio on the order of ~10 1 to ~10 2 in a multi-core computational environment. Furthermore, our new inverse modeling method is a powerful tool for characterizing subsurface heterogeneity for moderate- to large-scale problems.« less

A computationally efficient parallel Levenberg-Marquardt algorithm for highly parameterized inverse model analyses

DOE PAGES

Lin, Youzuo; O'Malley, Daniel; Vesselinov, Velimir V.

2016-09-01

Inverse modeling seeks model parameters given a set of observations. However, for practical problems because the number of measurements is often large and the model parameters are also numerous, conventional methods for inverse modeling can be computationally expensive. We have developed a new, computationally-efficient parallel Levenberg-Marquardt method for solving inverse modeling problems with a highly parameterized model space. Levenberg-Marquardt methods require the solution of a linear system of equations which can be prohibitively expensive to compute for moderate to large-scale problems. Our novel method projects the original linear problem down to a Krylov subspace, such that the dimensionality of themore » problem can be significantly reduced. Furthermore, we store the Krylov subspace computed when using the first damping parameter and recycle the subspace for the subsequent damping parameters. The efficiency of our new inverse modeling algorithm is significantly improved using these computational techniques. We apply this new inverse modeling method to invert for random transmissivity fields in 2D and a random hydraulic conductivity field in 3D. Our algorithm is fast enough to solve for the distributed model parameters (transmissivity) in the model domain. The algorithm is coded in Julia and implemented in the MADS computational framework (http://mads.lanl.gov). By comparing with Levenberg-Marquardt methods using standard linear inversion techniques such as QR or SVD methods, our Levenberg-Marquardt method yields a speed-up ratio on the order of ~10 1 to ~10 2 in a multi-core computational environment. Furthermore, our new inverse modeling method is a powerful tool for characterizing subsurface heterogeneity for moderate- to large-scale problems.« less

Artificial intelligence in medicine: humans need not apply?

PubMed

Diprose, William; Buist, Nicholas

2016-05-06

Artificial intelligence (AI) is a rapidly growing field with a wide range of applications. Driven by economic constraints and the potential to reduce human error, we believe that over the coming years AI will perform a significant amount of the diagnostic and treatment decision-making traditionally performed by the doctor. Humans would continue to be an important part of healthcare delivery, but in many situations, less expensive fit-for-purpose healthcare workers could be trained to 'fill the gaps' where AI are less capable. As a result, the role of the doctor as an expensive problem-solver would become redundant.

Shortened Nonword Repetition Task (NWR-S): A Simple, Quick, and Less Expensive Outcome to Identify Children with Combined Specific Language and Reading Impairment

ERIC Educational Resources Information Center

le Clercq, Carlijn M. P.; van der Schroeff, Marc P.; Rispens, Judith E.; Ruytjens, Liesbet; Goedegebure, André; van Ingen, Gijs; Franken, Marie-Christine

2017-01-01

Purpose: The purpose of this research note was to validate a simplified version of the Dutch nonword repetition task (NWR; Rispens & Baker, 2012). The NWR was shortened and scoring was transformed to correct/incorrect nonwords, resulting in the shortened NWR (NWR-S). Method: NWR-S and NWR performance were compared in the previously published…

Loosely Coupled GPS-Aided Inertial Navigation System for Range Safety

NASA Technical Reports Server (NTRS)

Heatwole, Scott; Lanzi, Raymond J.

2010-01-01

The Autonomous Flight Safety System (AFSS) aims to replace the human element of range safety operations, as well as reduce reliance on expensive, downrange assets for launches of expendable launch vehicles (ELVs). The system consists of multiple navigation sensors and flight computers that provide a highly reliable platform. It is designed to ensure that single-event failures in a flight computer or sensor will not bring down the whole system. The flight computer uses a rules-based structure derived from range safety requirements to make decisions whether or not to destroy the rocket.

Application of the System Identification Technique to Goal-Directed Saccades.

DTIC Science & Technology

1984-07-30

1983 to May 31, 1984 by the AFOSR under Grant No. AFOSR-83-0187. 1. Salaries & Wages $7,257 2. Employee Benefits $ 4186 3. Indirect Costs $1,177 *’ 1...Equipment $2,127 DEC VT100 Terminal Computer Terminal Table & Chair Computer Interface 5. Travel $ 672 6. Miscellaneous Expenses 281 Computer Costs ...Telephone Xeroxing Report Costs Total $12,000 A 1cc;3t Ion r . ;. ., ’o n. e, Ef V r CI3 k.i *r 7’r’ ’ - s-I - . CLef • -- * 0 - -- -, r ~ 𔄁 . r w

GPSS/360 computer models to simulate aircraft passenger emergency evacuations.

DOT National Transportation Integrated Search

1972-09-01

Live tests of emergency evacuation of transport aircraft are becoming increasingly expensive as the planes grow to a size seating hundreds of passengers. Repeated tests, to cope with random variations, increase these costs, as well as risks of injuri...

Another View of "PC vs. Mac."

ERIC Educational Resources Information Center

DeMillion, John A.

1998-01-01

An article by Nan Wodarz in the November 1997 issue listed reasons why the Microsoft computer operating system was superior to the Apple Macintosh platform. This rebuttal contends the Macintosh is less expensive, lasts longer, and requires less technical staff for support. (MLF)

Experimental CAD Course Uses Low-Cost Systems.

ERIC Educational Resources Information Center

Wohlers, Terry

1984-01-01

Describes the outstanding results obtained when a department of industrial sciences used special software on microcomputers to teach computer-aided design (CAD) as an alternative to much more expensive equipment. The systems used and prospects for the future are also considered. (JN)

Hybrid Rocket Performance Prediction with Coupling Method of CFD and Thermal Conduction Calculation

NASA Astrophysics Data System (ADS)

Funami, Yuki; Shimada, Toru

The final purpose of this study is to develop a design tool for hybrid rocket engines. This tool is a computer code which will be used in order to investigate rocket performance characteristics and unsteady phenomena lasting through the burning time, such as fuel regression or combustion oscillation. When phenomena inside a combustion chamber, namely boundary layer combustion, are described, it is difficult to use rigorous models for this target. It is because calculation cost may be too expensive. Therefore simple models are required for this calculation. In this study, quasi-one-dimensional compressible Euler equations for flowfields inside a chamber and the equation for thermal conduction inside a solid fuel are numerically solved. The energy balance equation at the solid fuel surface is solved to estimate fuel regression rate. Heat feedback model is Karabeyoglu's model dependent on total mass flux. Combustion model is global single step reaction model for 4 chemical species or chemical equilibrium model for 9 chemical species. As a first step, steady-state solutions are reported.

First Virtual Live Conference in Healthcare.

PubMed

Parthasarathi, Ramakrishnan; Gomes, Rachel M; Palanivelu, Praveen Raj; Senthilnathan, Palanisamy; Rajapandian, Subbiah; Venkatachalam, Ramasamy; Palanivelu, Chinnusamy

2017-07-01

Conferences and meetings bring together thousands of doctors from diverse locations. However, the traveling, accommodation, and arrangement of venues for conferences and meetings are expensive and a lot of time needs to be devoted to these logistics. The purpose of this article was to present our own virtual live conference experience using web conferencing and to briefly outline the basics and advantages of this technology in organization of healthcare conferences. Web conferencing technology was used to organize an international bariatric surgery conference, allowing a large number of attendees to participate and interact from wherever they were, using merely an Internet connection with a video player on their personal computers, laptops, or smartphones. A virtual live conference saves a lot of time and cost and simplifies the logistics needed to organize a learning conference with worldwide participation. As far as we know, this is the first report of a virtual live conference in healthcare. We see it as the future of organizing experts as well as medical teaching conferences.

Onyx-Advanced Aeropropulsion Simulation Framework Created

NASA Technical Reports Server (NTRS)

Reed, John A.

2001-01-01

The Numerical Propulsion System Simulation (NPSS) project at the NASA Glenn Research Center is developing a new software environment for analyzing and designing aircraft engines and, eventually, space transportation systems. Its purpose is to dramatically reduce the time, effort, and expense necessary to design and test jet engines by creating sophisticated computer simulations of an aerospace object or system (refs. 1 and 2). Through a university grant as part of that effort, researchers at the University of Toledo have developed Onyx, an extensible Java-based (Sun Micro-systems, Inc.), objectoriented simulation framework, to investigate how advanced software design techniques can be successfully applied to aeropropulsion system simulation (refs. 3 and 4). The design of Onyx's architecture enables users to customize and extend the framework to add new functionality or adapt simulation behavior as required. It exploits object-oriented technologies, such as design patterns, domain frameworks, and software components, to develop a modular system in which users can dynamically replace components with others having different functionality.

Magnetic resonance imaging of granular materials

NASA Astrophysics Data System (ADS)

Stannarius, Ralf

2017-05-01

Magnetic Resonance Imaging (MRI) has become one of the most important tools to screen humans in medicine; virtually every modern hospital is equipped with a Nuclear Magnetic Resonance (NMR) tomograph. The potential of NMR in 3D imaging tasks is by far greater, but there is only "a handful" of MRI studies of particulate matter. The method is expensive, time-consuming, and requires a deep understanding of pulse sequences, signal acquisition, and processing. We give a short introduction into the physical principles of this imaging technique, describe its advantages and limitations for the screening of granular matter, and present a number of examples of different application purposes, from the exploration of granular packing, via the detection of flow and particle diffusion, to real dynamic measurements. Probably, X-ray computed tomography is preferable in most applications, but fast imaging of single slices with modern MRI techniques is unmatched, and the additional opportunity to retrieve spatially resolved flow and diffusion profiles without particle tracking is a unique feature.

Smartphone attachment for stethoscope recording.

PubMed

Thompson, Jeff

2015-01-01

With the ubiquity of smartphones and the rising technology of 3D printing, novel devices can be developed that leverage the "computer in your pocket" and rapid prototyping technologies toward scientific, medical, engineering, and creative purposes. This paper describes such a device: a simple 3D-printed extension for Apple's iPhone that allows the sound from an off-the-shelf acoustic stethoscope to be recorded using the phone's built-in microphone. The attachment's digital 3D files can be easily shared, modified for similar phones and devices capable of recording audio, and in combination with 3D printing technology allow for fabrication of a durable device without need for an entire factory of expensive and specialized machining tools. It is hoped that by releasing this device as an open source set of printable files that can be downloaded and reproduced cheaply, others can make use of these developments where access to cost-prohibitive, specialized medical instruments are not available. Coupled with specialized smartphone software ("apps"), more sophisticated and automated diagnostics may also be possible on-site.

ATTDES: An Expert System for Satellite Attitude Determination and Control. 2

NASA Technical Reports Server (NTRS)

Mackison, Donald L.; Gifford, Kevin

1996-01-01

The design, analysis, and flight operations of satellite attitude determintion and attitude control systems require extensive mathematical formulations, optimization studies, and computer simulation. This is best done by an analyst with extensive education and experience. The development of programs such as ATTDES permit the use of advanced techniques by those with less experience. Typical tasks include the mission analysis to select stabilization and damping schemes, attitude determination sensors and algorithms, and control system designs to meet program requirements. ATTDES is a system that includes all of these activities, including high fidelity orbit environment models that can be used for preliminary analysis, parameter selection, stabilization schemes, the development of estimators covariance analyses, and optimization, and can support ongoing orbit activities. The modification of existing simulations to model new configurations for these purposes can be an expensive, time consuming activity that becomes a pacing item in the development and operation of such new systems. The use of an integrated tool such as ATTDES significantly reduces the effort and time required for these tasks.

GPU accelerated edge-region based level set evolution constrained by 2D gray-scale histogram.

PubMed

Balla-Arabé, Souleymane; Gao, Xinbo; Wang, Bin

2013-07-01

Due to its intrinsic nature which allows to easily handle complex shapes and topological changes, the level set method (LSM) has been widely used in image segmentation. Nevertheless, LSM is computationally expensive, which limits its applications in real-time systems. For this purpose, we propose a new level set algorithm, which uses simultaneously edge, region, and 2D histogram information in order to efficiently segment objects of interest in a given scene. The computational complexity of the proposed LSM is greatly reduced by using the highly parallelizable lattice Boltzmann method (LBM) with a body force to solve the level set equation (LSE). The body force is the link with image data and is defined from the proposed LSE. The proposed LSM is then implemented using an NVIDIA graphics processing units to fully take advantage of the LBM local nature. The new algorithm is effective, robust against noise, independent to the initial contour, fast, and highly parallelizable. The edge and region information enable to detect objects with and without edges, and the 2D histogram information enable the effectiveness of the method in a noisy environment. Experimental results on synthetic and real images demonstrate subjectively and objectively the performance of the proposed method.

Algorithm and code development for unsteady three-dimensional Navier-Stokes equations

NASA Technical Reports Server (NTRS)

Obayashi, Shigeru

1994-01-01

Aeroelastic tests require extensive cost and risk. An aeroelastic wind-tunnel experiment is an order of magnitude more expensive than a parallel experiment involving only aerodynamics. By complementing the wind-tunnel experiments with numerical simulations, the overall cost of the development of aircraft can be considerably reduced. In order to accurately compute aeroelastic phenomenon it is necessary to solve the unsteady Euler/Navier-Stokes equations simultaneously with the structural equations of motion. These equations accurately describe the flow phenomena for aeroelastic applications. At ARC a code, ENSAERO, is being developed for computing the unsteady aerodynamics and aeroelasticity of aircraft, and it solves the Euler/Navier-Stokes equations. The purpose of this cooperative agreement was to enhance ENSAERO in both algorithm and geometric capabilities. During the last five years, the algorithms of the code have been enhanced extensively by using high-resolution upwind algorithms and efficient implicit solvers. The zonal capability of the code has been extended from a one-to-one grid interface to a mismatching unsteady zonal interface. The geometric capability of the code has been extended from a single oscillating wing case to a full-span wing-body configuration with oscillating control surfaces. Each time a new capability was added, a proper validation case was simulated, and the capability of the code was demonstrated.

A Comparative Study of Point Cloud Data Collection and Processing

NASA Astrophysics Data System (ADS)

Pippin, J. E.; Matheney, M.; Gentle, J. N., Jr.; Pierce, S. A.; Fuentes-Pineda, G.

2016-12-01

Over the past decade, there has been dramatic growth in the acquisition of publicly funded high-resolution topographic data for scientific, environmental, engineering and planning purposes. These data sets are valuable for applications of interest across a large and varied user community. However, because of the large volumes of data produced by high-resolution mapping technologies and expense of aerial data collection, it is often difficult to collect and distribute these datasets. Furthermore, the data can be technically challenging to process, requiring software and computing resources not readily available to many users. This study presents a comparison of advanced computing hardware and software that is used to collect and process point cloud datasets, such as LIDAR scans. Activities included implementation and testing of open source libraries and applications for point cloud data processing such as, Meshlab, Blender, PDAL, and PCL. Additionally, a suite of commercial scale applications, Skanect and Cloudcompare, were applied to raw datasets. Handheld hardware solutions, a Structure Scanner and Xbox 360 Kinect V1, were tested for their ability to scan at three field locations. The resultant data projects successfully scanned and processed subsurface karst features ranging from small stalactites to large rooms, as well as a surface waterfall feature. Outcomes support the feasibility of rapid sensing in 3D at field scales.

De Novo Protein Structure Prediction

NASA Astrophysics Data System (ADS)

Hung, Ling-Hong; Ngan, Shing-Chung; Samudrala, Ram

An unparalleled amount of sequence data is being made available from large-scale genome sequencing efforts. The data provide a shortcut to the determination of the function of a gene of interest, as long as there is an existing sequenced gene with similar sequence and of known function. This has spurred structural genomic initiatives with the goal of determining as many protein folds as possible (Brenner and Levitt, 2000; Burley, 2000; Brenner, 2001; Heinemann et al., 2001). The purpose of this is twofold: First, the structure of a gene product can often lead to direct inference of its function. Second, since the function of a protein is dependent on its structure, direct comparison of the structures of gene products can be more sensitive than the comparison of sequences of genes for detecting homology. Presently, structural determination by crystallography and NMR techniques is still slow and expensive in terms of manpower and resources, despite attempts to automate the processes. Computer structure prediction algorithms, while not providing the accuracy of the traditional techniques, are extremely quick and inexpensive and can provide useful low-resolution data for structure comparisons (Bonneau and Baker, 2001). Given the immense number of structures which the structural genomic projects are attempting to solve, there would be a considerable gain even if the computer structure prediction approach were applicable to a subset of proteins.

A Portable, Inexpensive, Nonmydriatic Fundus Camera Based on the Raspberry Pi® Computer.

PubMed

Shen, Bailey Y; Mukai, Shizuo

2017-01-01

Purpose. Nonmydriatic fundus cameras allow retinal photography without pharmacologic dilation of the pupil. However, currently available nonmydriatic fundus cameras are bulky, not portable, and expensive. Taking advantage of recent advances in mobile technology, we sought to create a nonmydriatic fundus camera that was affordable and could be carried in a white coat pocket. Methods. We built a point-and-shoot prototype camera using a Raspberry Pi computer, an infrared-sensitive camera board, a dual infrared and white light light-emitting diode, a battery, a 5-inch touchscreen liquid crystal display, and a disposable 20-diopter condensing lens. Our prototype camera was based on indirect ophthalmoscopy with both infrared and white lights. Results. The prototype camera measured 133mm × 91mm × 45mm and weighed 386 grams. The total cost of the components, including the disposable lens, was $185.20. The camera was able to obtain good-quality fundus images without pharmacologic dilation of the pupils. Conclusion. A fully functional, inexpensive, handheld, nonmydriatic fundus camera can be easily assembled from a relatively small number of components. With modest improvements, such a camera could be useful for a variety of healthcare professionals, particularly those who work in settings where a traditional table-mounted nonmydriatic fundus camera would be inconvenient.

Parameter estimation using weighted total least squares in the two-compartment exchange model.

PubMed

Garpebring, Anders; Löfstedt, Tommy

2018-01-01

The linear least squares (LLS) estimator provides a fast approach to parameter estimation in the linearized two-compartment exchange model. However, the LLS method may introduce a bias through correlated noise in the system matrix of the model. The purpose of this work is to present a new estimator for the linearized two-compartment exchange model that takes this noise into account. To account for the noise in the system matrix, we developed an estimator based on the weighted total least squares (WTLS) method. Using simulations, the proposed WTLS estimator was compared, in terms of accuracy and precision, to an LLS estimator and a nonlinear least squares (NLLS) estimator. The WTLS method improved the accuracy compared to the LLS method to levels comparable to the NLLS method. This improvement was at the expense of increased computational time; however, the WTLS was still faster than the NLLS method. At high signal-to-noise ratio all methods provided similar precisions while inconclusive results were observed at low signal-to-noise ratio. The proposed method provides improvements in accuracy compared to the LLS method, however, at an increased computational cost. Magn Reson Med 79:561-567, 2017. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.

Artificial Neural Network for Probabilistic Feature Recognition in Liquid Chromatography Coupled to High-Resolution Mass Spectrometry.

PubMed

Woldegebriel, Michael; Derks, Eduard

2017-01-17

In this work, a novel probabilistic untargeted feature detection algorithm for liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS) using artificial neural network (ANN) is presented. The feature detection process is approached as a pattern recognition problem, and thus, ANN was utilized as an efficient feature recognition tool. Unlike most existing feature detection algorithms, with this approach, any suspected chromatographic profile (i.e., shape of a peak) can easily be incorporated by training the network, avoiding the need to perform computationally expensive regression methods with specific mathematical models. In addition, with this method, we have shown that the high-resolution raw data can be fully utilized without applying any arbitrary thresholds or data reduction, therefore improving the sensitivity of the method for compound identification purposes. Furthermore, opposed to existing deterministic (binary) approaches, this method rather estimates the probability of a feature being present/absent at a given point of interest, thus giving chance for all data points to be propagated down the data analysis pipeline, weighed with their probability. The algorithm was tested with data sets generated from spiked samples in forensic and food safety context and has shown promising results by detecting features for all compounds in a computationally reasonable time.

A Portable, Inexpensive, Nonmydriatic Fundus Camera Based on the Raspberry Pi® Computer

PubMed Central

Shen, Bailey Y.

2017-01-01

Purpose. Nonmydriatic fundus cameras allow retinal photography without pharmacologic dilation of the pupil. However, currently available nonmydriatic fundus cameras are bulky, not portable, and expensive. Taking advantage of recent advances in mobile technology, we sought to create a nonmydriatic fundus camera that was affordable and could be carried in a white coat pocket. Methods. We built a point-and-shoot prototype camera using a Raspberry Pi computer, an infrared-sensitive camera board, a dual infrared and white light light-emitting diode, a battery, a 5-inch touchscreen liquid crystal display, and a disposable 20-diopter condensing lens. Our prototype camera was based on indirect ophthalmoscopy with both infrared and white lights. Results. The prototype camera measured 133mm × 91mm × 45mm and weighed 386 grams. The total cost of the components, including the disposable lens, was $185.20. The camera was able to obtain good-quality fundus images without pharmacologic dilation of the pupils. Conclusion. A fully functional, inexpensive, handheld, nonmydriatic fundus camera can be easily assembled from a relatively small number of components. With modest improvements, such a camera could be useful for a variety of healthcare professionals, particularly those who work in settings where a traditional table-mounted nonmydriatic fundus camera would be inconvenient. PMID:28396802

A Robust and Effective Smart-Card-Based Remote User Authentication Mechanism Using Hash Function

PubMed Central

Odelu, Vanga; Goswami, Adrijit

2014-01-01

In a remote user authentication scheme, a remote server verifies whether a login user is genuine and trustworthy, and also for mutual authentication purpose a login user validates whether the remote server is genuine and trustworthy. Several remote user authentication schemes using the password, the biometrics, and the smart card have been proposed in the literature. However, most schemes proposed in the literature are either computationally expensive or insecure against several known attacks. In this paper, we aim to propose a new robust and effective password-based remote user authentication scheme using smart card. Our scheme is efficient, because our scheme uses only efficient one-way hash function and bitwise XOR operations. Through the rigorous informal and formal security analysis, we show that our scheme is secure against possible known attacks. We perform the simulation for the formal security analysis using the widely accepted AVISPA (Automated Validation Internet Security Protocols and Applications) tool to ensure that our scheme is secure against passive and active attacks. Furthermore, our scheme supports efficiently the password change phase always locally without contacting the remote server and correctly. In addition, our scheme performs significantly better than other existing schemes in terms of communication, computational overheads, security, and features provided by our scheme. PMID:24892078

A robust and effective smart-card-based remote user authentication mechanism using hash function.

PubMed

Das, Ashok Kumar; Odelu, Vanga; Goswami, Adrijit

2014-01-01

In a remote user authentication scheme, a remote server verifies whether a login user is genuine and trustworthy, and also for mutual authentication purpose a login user validates whether the remote server is genuine and trustworthy. Several remote user authentication schemes using the password, the biometrics, and the smart card have been proposed in the literature. However, most schemes proposed in the literature are either computationally expensive or insecure against several known attacks. In this paper, we aim to propose a new robust and effective password-based remote user authentication scheme using smart card. Our scheme is efficient, because our scheme uses only efficient one-way hash function and bitwise XOR operations. Through the rigorous informal and formal security analysis, we show that our scheme is secure against possible known attacks. We perform the simulation for the formal security analysis using the widely accepted AVISPA (Automated Validation Internet Security Protocols and Applications) tool to ensure that our scheme is secure against passive and active attacks. Furthermore, our scheme supports efficiently the password change phase always locally without contacting the remote server and correctly. In addition, our scheme performs significantly better than other existing schemes in terms of communication, computational overheads, security, and features provided by our scheme.

A comparison of line enhancement techniques: applications to guide-wire detection and respiratory motion tracking

NASA Astrophysics Data System (ADS)

Bismuth, Vincent; Vancamberg, Laurence; Gorges, Sébastien

2009-02-01

During interventional radiology procedures, guide-wires are usually inserted into the patients vascular tree for diagnosis or healing purpose. These procedures are monitored with an Xray interventional system providing images of the interventional devices navigating through the patient's body. The automatic detection of such tools by image processing means has gained maturity over the past years and enables applications ranging from image enhancement to multimodal image fusion. Sophisticated detection methods are emerging, which rely on a variety of device enhancement techniques. In this article we reviewed and classified these techniques into three families. We chose a state of the art approach in each of them and built a rigorous framework to compare their detection capability and their computational complexity. Through simulations and the intensive use of ROC curves we demonstrated that the Hessian based methods are the most robust to strong curvature of the devices and that the family of rotated filters technique is the most suited for detecting low CNR and low curvature devices. The steerable filter approach demonstrated less interesting detection capabilities and appears to be the most expensive one to compute. Finally we demonstrated the interest of automatic guide-wire detection on a clinical topic: the compensation of respiratory motion in multimodal image fusion.

A simple parameterization of aerosol emissions in RAMS

NASA Astrophysics Data System (ADS)

Letcher, Theodore

Throughout the past decade, a high degree of attention has been focused on determining the microphysical impact of anthropogenically enhanced concentrations of Cloud Condensation Nuclei (CCN) on orographic snowfall in the mountains of the western United States. This area has garnered a lot of attention due to the implications this effect may have on local water resource distribution within the Region. Recent advances in computing power and the development of highly advanced microphysical schemes within numerical models have provided an estimation of the sensitivity that orographic snowfall has to changes in atmospheric CCN concentrations. However, what is still lacking is a coupling between these advanced microphysical schemes and a real-world representation of CCN sources. Previously, an attempt to representation the heterogeneous evolution of aerosol was made by coupling three-dimensional aerosol output from the WRF Chemistry model to the Colorado State University (CSU) Regional Atmospheric Modeling System (RAMS) (Ward et al. 2011). The biggest problem associated with this scheme was the computational expense. In fact, the computational expense associated with this scheme was so high, that it was prohibitive for simulations with fine enough resolution to accurately represent microphysical processes. To improve upon this method, a new parameterization for aerosol emission was developed in such a way that it was fully contained within RAMS. Several assumptions went into generating a computationally efficient aerosol emissions parameterization in RAMS. The most notable assumption was the decision to neglect the chemical processes in formed in the formation of Secondary Aerosol (SA), and instead treat SA as primary aerosol via short-term WRF-CHEM simulations. While, SA makes up a substantial portion of the total aerosol burden (much of which is made up of organic material), the representation of this process is highly complex and highly expensive within a numerical model. Furthermore, SA formation is greatly reduced during the winter months due to the lack of naturally produced organic VOC's. Because of these reasons, it was felt that neglecting SOA within the model was the best course of action. The actual parameterization uses a prescribed source map to add aerosol to the model at two vertical levels that surround an arbitrary height decided by the user. To best represent the real-world, the WRF Chemistry model was run using the National Emissions Inventory (NEI2005) to represent anthropogenic emissions and the Model Emissions of Gases and Aerosols from Nature (MEGAN) to represent natural contributions to aerosol. WRF Chemistry was run for one hour, after which the aerosol output along with the hygroscopicity parameter (κ) were saved into a data file that had the capacity to be interpolated to an arbitrary grid used in RAMS. The comparison of this parameterization to observations collected at Mesa Verde National Park (MVNP) during the Inhibition of Snowfall from Pollution Aerosol (ISPA-III) field campaign yielded promising results. The model was able to simulate the variability in near surface aerosol concentration with reasonable accuracy, though with a general low bias. Furthermore, this model compared much better to the observations than did the WRF Chemistry model using a fraction of the computational expense. This emissions scheme was able to show reasonable solutions regarding the aerosol concentrations and can therefore be used to provide an estimate of the seasonal impact of increased CCN on water resources in Western Colorado with relatively low computational expense.

Computer use and addiction in Romanian children and teenagers--an observational study.

PubMed

Chiriţă, V; Chiriţă, Roxana; Stefănescu, C; Chele, Gabriela; Ilinca, M

2006-01-01

The computer has provided some wonderful opportunities for our children. Although research on the effects of children's use of computer is still ambiguous, some initial indications of positive and negative effects are beginning t emerge. They commonly use computers for playing games, completing school assignments, email, and connecting to the Internet. This may sometimes come at the expense of other activities such as homework or normal social interchange. Although most children seem to naturally correct the problem, parents and educators must monitor the signs of misuse. Studies of general computer users suggest that some children's may experience psychological problems such as social isolation, depression, loneliness, and time mismanagement related to their computer use and failure at school. The purpose of this study is to investigate issues related to computer use by school students from 11 to 18 years old. The survey included a representative sample of 439 school students of ages 11 to 18. All of the students came from 3 gymnasium schools and 5 high schools of Iaşi, Romania. The students answered to a questionnaire comprising 34 questions related to computer activities. The children's parents answered to a second questionnaire with the same subject. Most questions supposed to rate on a scale the frequency of occurrence of a certain event or issue; some questions solicited an open-answer or to choose an answer from a list. These were aimed at highlighting: (1) The frequency of computer use by the students; (2) The interference of excessive use with school performance and social life; (3) The identification of a possible computer addiction. The data was processed using the SPSS statistics software, version 11.0. Results show that the school students prefer to spend a considerable amount of time with their computers, over 3 hours/day. More than 65.7% of the students have a computer at home. More than 70% of the parents admit they do not or only occasionally discuss computer use with their children. This indicates the fact that, although they bought a computer for their children, they do not supervise the way it is used. The family is rather a passive presence, vaguely responsible and lacking involvement. But, the parents consider that, for better school results, their children should use their computers. This study tried to identify aspects of computer addiction in gymnasium and high school students, as well.

Providing more than health care: the dynamics of humanitarian surgery efforts on the local microeconomy.

PubMed

Nagengast, Eric S; Caterson, E J; Magee, William P; Hatcher, Kristin; Ramos, Margarita S; Campbell, Alex

2014-09-01

Humanitarian cleft surgery has long been provided by teams from resource-rich countries traveling for short-term missions to resource-poor countries. After identifying an area of durable unmet need through surgical missions, Operation Smile constructed a permanent center for cleft care in Northeast India. The Operation Smile Guwahati Comprehensive Cleft Care Center (GCCCC) uses a high-volume subspecialized institution to provide safe, quality, comprehensive, and cost-effective cleft care to a highly vulnerable patient population in Assam, India. The purpose of this study was to profile the expenses of several cleft missions carried out in Assam and to compare these to the expenditures of the permanent comprehensive cleft care center. We reviewed financial data from 4 Operation Smile missions in Assam between December 2009 and February 2011 and from the GCCCC for the 2012-2013 fiscal year. Expenses from the 2 models were categorized and compared. In the studied period, 33% of the mission expenses were spent locally compared to 94% of those of the center. The largest expenses in the mission model were air travel (48.8%) and hotel expenses (21.6%) for the team, whereas salaries (46.3%) and infrastructure costs (19.8%) made up the largest fractions of expenses in the center model. The evolution from mission-based care to a specialty hospital model in Guwahati incorporated a transition from vertical inputs to investments in infrastructure and human capital to create a sustainable local care delivery system.

A highly reliable, autonomous data communication subsystem for an advanced information processing system

NASA Technical Reports Server (NTRS)

Nagle, Gail; Masotto, Thomas; Alger, Linda

1990-01-01

The need to meet the stringent performance and reliability requirements of advanced avionics systems has frequently led to implementations which are tailored to a specific application and are therefore difficult to modify or extend. Furthermore, many integrated flight critical systems are input/output intensive. By using a design methodology which customizes the input/output mechanism for each new application, the cost of implementing new systems becomes prohibitively expensive. One solution to this dilemma is to design computer systems and input/output subsystems which are general purpose, but which can be easily configured to support the needs of a specific application. The Advanced Information Processing System (AIPS), currently under development has these characteristics. The design and implementation of the prototype I/O communication system for AIPS is described. AIPS addresses reliability issues related to data communications by the use of reconfigurable I/O networks. When a fault or damage event occurs, communication is restored to functioning parts of the network and the failed or damage components are isolated. Performance issues are addressed by using a parallelized computer architecture which decouples Input/Output (I/O) redundancy management and I/O processing from the computational stream of an application. The autonomous nature of the system derives from the highly automated and independent manner in which I/O transactions are conducted for the application as well as from the fact that the hardware redundancy management is entirely transparent to the application.

Reduced-Order Modeling: New Approaches for Computational Physics

NASA Technical Reports Server (NTRS)

Beran, Philip S.; Silva, Walter A.

2001-01-01

In this paper, we review the development of new reduced-order modeling techniques and discuss their applicability to various problems in computational physics. Emphasis is given to methods ba'sed on Volterra series representations and the proper orthogonal decomposition. Results are reported for different nonlinear systems to provide clear examples of the construction and use of reduced-order models, particularly in the multi-disciplinary field of computational aeroelasticity. Unsteady aerodynamic and aeroelastic behaviors of two- dimensional and three-dimensional geometries are described. Large increases in computational efficiency are obtained through the use of reduced-order models, thereby justifying the initial computational expense of constructing these models and inotivatim,- their use for multi-disciplinary design analysis.

GPU Accelerated Prognostics

NASA Technical Reports Server (NTRS)

Gorospe, George E., Jr.; Daigle, Matthew J.; Sankararaman, Shankar; Kulkarni, Chetan S.; Ng, Eley

2017-01-01

Prognostic methods enable operators and maintainers to predict the future performance for critical systems. However, these methods can be computationally expensive and may need to be performed each time new information about the system becomes available. In light of these computational requirements, we have investigated the application of graphics processing units (GPUs) as a computational platform for real-time prognostics. Recent advances in GPU technology have reduced cost and increased the computational capability of these highly parallel processing units, making them more attractive for the deployment of prognostic software. We present a survey of model-based prognostic algorithms with considerations for leveraging the parallel architecture of the GPU and a case study of GPU-accelerated battery prognostics with computational performance results.

A Computationally Efficient Parallel Levenberg-Marquardt Algorithm for Large-Scale Big-Data Inversion

NASA Astrophysics Data System (ADS)

Lin, Y.; O'Malley, D.; Vesselinov, V. V.

2015-12-01

Inverse modeling seeks model parameters given a set of observed state variables. However, for many practical problems due to the facts that the observed data sets are often large and model parameters are often numerous, conventional methods for solving the inverse modeling can be computationally expensive. We have developed a new, computationally-efficient Levenberg-Marquardt method for solving large-scale inverse modeling. Levenberg-Marquardt methods require the solution of a dense linear system of equations which can be prohibitively expensive to compute for large-scale inverse problems. Our novel method projects the original large-scale linear problem down to a Krylov subspace, such that the dimensionality of the measurements can be significantly reduced. Furthermore, instead of solving the linear system for every Levenberg-Marquardt damping parameter, we store the Krylov subspace computed when solving the first damping parameter and recycle it for all the following damping parameters. The efficiency of our new inverse modeling algorithm is significantly improved by using these computational techniques. We apply this new inverse modeling method to invert for a random transitivity field. Our algorithm is fast enough to solve for the distributed model parameters (transitivity) at each computational node in the model domain. The inversion is also aided by the use regularization techniques. The algorithm is coded in Julia and implemented in the MADS computational framework (http://mads.lanl.gov). Julia is an advanced high-level scientific programing language that allows for efficient memory management and utilization of high-performance computational resources. By comparing with a Levenberg-Marquardt method using standard linear inversion techniques, our Levenberg-Marquardt method yields speed-up ratio of 15 in a multi-core computational environment and a speed-up ratio of 45 in a single-core computational environment. Therefore, our new inverse modeling method is a powerful tool for large-scale applications.

Reimbursement To Local Governments For Emergency Response To Hazardous Substance Releases Regulation Overview

EPA Pesticide Factsheets

The purpose of the Local Governments Reimbursement (LGR) program is to provide funds, in the form of reimbursements for expenses, to local, county, and tribal governments that respond to a hazardous substance release in their jurisdiction.

42 CFR 435.121 - Individuals in States using more restrictive requirements for Medicaid than the SSI requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... cards by the State for the reference month. Under this provision, the reference month for determining... incurred medical expenses that are deducted. (2) For purposes of counting income with respect to...

12 CFR 621.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... entity, or any combination thereof, that is primarily obligated on the loan instrument. (c) Generally... Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ACCOUNTING AND REPORTING REQUIREMENTS Purpose and...) Accrual basis of accounting means the accounting method in which expenses are recorded when incurred...

12 CFR 621.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... entity, or any combination thereof, that is primarily obligated on the loan instrument. (c) Generally... Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ACCOUNTING AND REPORTING REQUIREMENTS Purpose and...) Accrual basis of accounting means the accounting method in which expenses are recorded when incurred...

12 CFR 621.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... entity, or any combination thereof, that is primarily obligated on the loan instrument. (c) Generally... Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ACCOUNTING AND REPORTING REQUIREMENTS Purpose and...) Accrual basis of accounting means the accounting method in which expenses are recorded when incurred...

A Finite Element Projection Method for the Solution of Particle Transport Problems with Anisotropic Scattering.

DTIC Science & Technology

1984-07-01

piecewise constant energy dependence. This is a seven-dimensional problem with time dependence, three spatial and two angular or directional variables and...in extending the computer implementation of the method to time and energy dependent problems, and to solving and validating this technique on a...problems they have severe limitations. The Monte Carlo method, usually requires the use of many hours of expensive computer time , and for deep

Topology Optimization for Reducing Additive Manufacturing Processing Distortions

DTIC Science & Technology

2017-12-01

features that curl or warp under thermal load and are subsequently struck by the recoater blade /roller. Support structures act to wick heat away and...was run for 150 iterations. The material properties for all examples were Young’s modulus E = 1 GPa, Poisson’s ratio ν = 0.25, and thermal expansion...the element-birth model is significantly more computationally expensive for a full op- timization run . Consider, the computational complexity of a

Green initiative impact on stock prices: A quantitative study of the clean energy industry

NASA Astrophysics Data System (ADS)

Jurisich, John M.

The purpose of this quantitative ex post facto research study was to explore the relationship between green initiative expense disclosures and stock prices of 46 NASDAQ listed Clean Edge Green Energy global companies from 2007 to 2010. The independent variables were sales and marketing, environmental, customer and supplier, community, and corporate governance practices that were correlated with the dependent variable in the study of stock prices. Expense disclosures were examined in an effort to measure the impact of green initiative programs and to expose the interrelationships between green initiative expense disclosures and fluctuations of stock prices. The data for the research was secondary data from existing annual reports. A statistically significant relationship was revealed between environmental practices and changes in stock prices. The study results also provided substantial evidence for leadership and managerial decision making to reduce or increase green initiative practices to maximize shareholder wealth of their respective organizations.

Cloud Computing with iPlant Atmosphere.

PubMed

McKay, Sheldon J; Skidmore, Edwin J; LaRose, Christopher J; Mercer, Andre W; Noutsos, Christos

2013-10-15

Cloud Computing refers to distributed computing platforms that use virtualization software to provide easy access to physical computing infrastructure and data storage, typically administered through a Web interface. Cloud-based computing provides access to powerful servers, with specific software and virtual hardware configurations, while eliminating the initial capital cost of expensive computers and reducing the ongoing operating costs of system administration, maintenance contracts, power consumption, and cooling. This eliminates a significant barrier to entry into bioinformatics and high-performance computing for many researchers. This is especially true of free or modestly priced cloud computing services. The iPlant Collaborative offers a free cloud computing service, Atmosphere, which allows users to easily create and use instances on virtual servers preconfigured for their analytical needs. Atmosphere is a self-service, on-demand platform for scientific computing. This unit demonstrates how to set up, access and use cloud computing in Atmosphere. Copyright © 2013 John Wiley & Sons, Inc.

Adjoint-Based Aerodynamic Design of Complex Aerospace Configurations

NASA Technical Reports Server (NTRS)

Nielsen, Eric J.

2016-01-01

An overview of twenty years of adjoint-based aerodynamic design research at NASA Langley Research Center is presented. Adjoint-based algorithms provide a powerful tool for efficient sensitivity analysis of complex large-scale computational fluid dynamics (CFD) simulations. Unlike alternative approaches for which computational expense generally scales with the number of design parameters, adjoint techniques yield sensitivity derivatives of a simulation output with respect to all input parameters at the cost of a single additional simulation. With modern large-scale CFD applications often requiring millions of compute hours for a single analysis, the efficiency afforded by adjoint methods is critical in realizing a computationally tractable design optimization capability for such applications.

Alloy Design Data Generated for B2-Ordered Compounds

NASA Technical Reports Server (NTRS)

Noebe, Ronald D.; Bozzolo, Guillermo; Abel, Phillip B.

2003-01-01

Developing alloys based on ordered compounds is significantly more complicated than developing designs based on disordered materials. In ordered compounds, the major constituent elements reside on particular sublattices. Therefore, the addition of a ternary element to a binary-ordered compound is complicated by the manner in which the ternary addition is made (at the expense of which binary component). When ternary additions are substituted for the wrong constituent, the physical and mechanical properties usually degrade. In some cases the resulting degradation in properties can be quite severe. For example, adding alloying additions to NiAl in the wrong combination (i.e., alloying additions that prefer the Al sublattice but are added at the expense of Ni) will severely embrittle the alloy to the point that it can literally fall apart during processing on cooling from the molten state. Consequently, alloying additions that strongly prefer one sublattice over another should always be added at the expense of that component during alloy development. Elements that have a very weak preference for a sublattice can usually be safely added at the expense of either element and will accommodate any deviation from stoichiometry by filling in for the deficient component. Unfortunately, this type of information is not known beforehand for most ordered systems. Therefore, a computational survey study, using a recently developed quantum approximate method, was undertaken at the NASA Glenn Research Center to determine the preferred site occupancy of ternary alloying additions to 12 different B2-ordered compounds including NiAl, FeAl, CoAl, CoFe, CoHf, CoTi, FeTi, RuAl, RuSi, RuHf, RuTi, and RuZr. Some of these compounds are potential high temperature structural alloys; others are used in thin-film magnetic and other electronic applications. The results are summarized. The italicized elements represent the previous sum total alloying information known and verify the computational method used to establish the table. Details of the computational procedures used to determine the preferred site occupancy can be found in reference 2. As further substantiation of the validity of the technique, and its extension to even more complicated systems, it was applied to two simultaneous alloying additions in an ordered alloy.

SIMULATING ATMOSPHERIC EXPOSURE IN A NATIONAL RISK ASSESSMENT USING AN INNOVATIVE METEOROLOGICAL SAMPLING SCHEME

EPA Science Inventory

Multimedia risk assessments require the temporal integration of atmospheric concentration and deposition with other media modules. However, providing an extended time series of estimates is computationally expensive. An alternative approach is to substitute long-term average a...

COMPETITIVE METAGENOMIC DNA HYBRIDIZATION IDENTIFIES HOST-SPECIFIC GENETIC MARKERS IN HUMAN FECAL MICROBIAL COMMUNITIES

EPA Science Inventory

Although recent technological advances in DNA sequencing and computational biology now allow scientists to compare entire microbial genomes, the use of these approaches to discern key genomic differences between natural microbial communities remains prohibitively expensive for mo...

Desktop Publishing for Counselors.

ERIC Educational Resources Information Center

Lucking, Robert; Mitchum, Nancy

1990-01-01

Discusses the fundamentals of desktop publishing for counselors, including hardware and software systems and peripherals. Notes by using desktop publishing, counselors can produce their own high-quality documents without the expense of commercial printers. Concludes computers present a way of streamlining the communications of a counseling…

Use of off-the-shelf PC-based flight simulators for aviation human factors research.

DOT National Transportation Integrated Search

1996-04-01

Flight simulation has historically been an expensive proposition, particularly if out-the-window views were desired. Advances in computer technology have allowed a modular, off-the-shelf flight simulation (based on 80486 processors or Pentiums) to be...

Software Prototyping: Designing Systems for Users.

ERIC Educational Resources Information Center

Spies, Phyllis Bova

1983-01-01

Reports on major change in computer software development process--the prototype model, i.e., implementation of skeletal system that is enhanced during interaction with users. Expensive and unreliable software, software design errors, traditional development approach, resources required for prototyping, success stories, and systems designer's role…

Identification of Bacterial DNA Markers for the Detection of Human and Cattle Fecal Pollution - SLIDES

EPA Science Inventory

Technological advances in DNA sequencing and computational biology allow scientists to compare entire microbial genomes. However, the use of these approaches to discern key genomic differences between natural microbial communities remains prohibitively expensive for most laborato...

IDENTIFICATION OF BACTERIAL DNA MARKERS FOR THE DETECTION OF HUMAN AND CATTLE FECAL POLLUTION

EPA Science Inventory

Technological advances in DNA sequencing and computational biology allow scientists to compare entire microbial genomes. However, the use of these approaches to discern key genomic differences between natural microbial communities remains prohibitively expensive for most laborato...

Iterative framework radiation hybrid mapping

USDA-ARS?s Scientific Manuscript database

Building comprehensive radiation hybrid maps for large sets of markers is a computationally expensive process, since the basic mapping problem is equivalent to the traveling salesman problem. The mapping problem is also susceptible to noise, and as a result, it is often beneficial to remove markers ...

Numerical Experiments with a Turbulent Single-Mode Rayleigh-Taylor Instability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cloutman, L.D.

2000-04-01

Direct numerical simulation is a powerful tool for studying turbulent flows. Unfortunately, it is also computationally expensive and often beyond the reach of the largest, fastest computers. Consequently, a variety of turbulence models have been devised to allow tractable and affordable simulations of averaged flow fields. Unfortunately, these present a variety of practical difficulties, including the incorporation of varying degrees of empiricism and phenomenology, which leads to a lack of universality. This unsatisfactory state of affairs has led to the speculation that one can avoid the expense and bother of using a turbulence model by relying on the grid andmore » numerical diffusion of the computational fluid dynamics algorithm to introduce a spectral cutoff on the flow field and to provide dissipation at the grid scale, thereby mimicking two main effects of a large eddy simulation model. This paper shows numerical examples of a single-mode Rayleigh-Taylor instability in which this procedure produces questionable results. We then show a dramatic improvement when two simple subgrid-scale models are employed. This study also illustrates the extreme sensitivity to initial conditions that is a common feature of turbulent flows.« less

Using Reconstructed POD Modes as Turbulent Inflow for LES Wind Turbine Simulations

NASA Astrophysics Data System (ADS)

Nielson, Jordan; Bhaganagar, Kiran; Juttijudata, Vejapong; Sirisup, Sirod

2016-11-01

Currently, in order to get realistic atmospheric effects of turbulence, wind turbine LES simulations require computationally expensive precursor simulations. At times, the precursor simulation is more computationally expensive than the wind turbine simulation. The precursor simulations are important because they capture turbulence in the atmosphere and as stated above, turbulence impacts the power production estimation. On the other hand, POD analysis has been shown to be capable of capturing turbulent structures. The current study was performed to determine the plausibility of using lower dimension models from POD analysis of LES simulations as turbulent inflow to wind turbine LES simulations. The study will aid the wind energy community by lowering the computational cost of full scale wind turbine LES simulations, while maintaining a high level of turbulent information and being able to quickly apply the turbulent inflow to multi turbine wind farms. This will be done by comparing a pure LES precursor wind turbine simulation with simulations that use reduced POD mod inflow conditions. The study shows the feasibility of using lower dimension models as turbulent inflow of LES wind turbine simulations. Overall the power production estimation and velocity field of the wind turbine wake are well captured with small errors.

A glacier runoff extension to the Precipitation Runoff Modeling System

USGS Publications Warehouse

Van Beusekom, Ashley E.; Viger, Roland

2016-01-01

A module to simulate glacier runoff, PRMSglacier, was added to PRMS (Precipitation Runoff Modeling System), a distributed-parameter, physical-process hydrological simulation code. The extension does not require extensive on-glacier measurements or computational expense but still relies on physical principles over empirical relations as much as is feasible while maintaining model usability. PRMSglacier is validated on two basins in Alaska, Wolverine, and Gulkana Glacier basin, which have been studied since 1966 and have a substantial amount of data with which to test model performance over a long period of time covering a wide range of climatic and hydrologic conditions. When error in field measurements is considered, the Nash-Sutcliffe efficiencies of streamflow are 0.87 and 0.86, the absolute bias fractions of the winter mass balance simulations are 0.10 and 0.08, and the absolute bias fractions of the summer mass balances are 0.01 and 0.03, all computed over 42 years for the Wolverine and Gulkana Glacier basins, respectively. Without taking into account measurement error, the values are still within the range achieved by the more computationally expensive codes tested over shorter time periods.

The role of under-determined approximations in engineering and science application

NASA Technical Reports Server (NTRS)

Carpenter, William C.

1992-01-01

There is currently a great deal of interest in using response surfaces in the optimization of aircraft performance. The objective function and/or constraint equations involved in these optimization problems may come from numerous disciplines such as structures, aerodynamics, environmental engineering, etc. In each of these disciplines, the mathematical complexity of the governing equations usually dictates that numerical results be obtained from large computer programs such as a finite element method program. Thus, when performing optimization studies, response surfaces are a convenient way of transferring information from the various disciplines to the optimization algorithm as opposed to bringing all the sundry computer programs together in a massive computer code. Response surfaces offer another advantage in the optimization of aircraft structures. A characteristic of these types of optimization problems is that evaluation of the objective function and response equations (referred to as a functional evaluation) can be very expensive in a computational sense. Because of the computational expense in obtaining functional evaluations, the present study was undertaken to investigate under-determinined approximations. An under-determined approximation is one in which there are fewer training pairs (pieces of information about a function) than there are undetermined parameters (coefficients or weights) associated with the approximation. Both polynomial approximations and neural net approximations were examined. Three main example problems were investigated: (1) a function of one design variable was considered; (2) a function of two design variables was considered; and (3) a 35 bar truss with 4 design variables was considered.

Self-energy matrices for electron transport calculations within the real-space finite-difference formalism

NASA Astrophysics Data System (ADS)

Tsukamoto, Shigeru; Ono, Tomoya; Hirose, Kikuji; Blügel, Stefan

2017-03-01

The self-energy term used in transport calculations, which describes the coupling between electrode and transition regions, is able to be evaluated only from a limited number of the propagating and evanescent waves of a bulk electrode. This obviously contributes toward the reduction of the computational expenses in transport calculations. In this paper, we present a mathematical formula for reducing the computational expenses further without using any approximation and without losing accuracy. So far, the self-energy term has been handled as a matrix with the same dimension as the Hamiltonian submatrix representing the interaction between an electrode and a transition region. In this work, through the singular-value decomposition of the submatrix, the self-energy matrix is handled as a smaller matrix, whose dimension is the rank number of the Hamiltonian submatrix. This procedure is practical in the case of using the pseudopotentials in a separable form, and the computational expenses for determining the self-energy matrix are reduced by 90% when employing a code based on the real-space finite-difference formalism and projector-augmented wave method. In addition, this technique is applicable to the transport calculations using atomic or localized basis sets. Adopting the self-energy matrices obtained from this procedure, we present the calculation of the electron transport properties of C20 molecular junctions. The application demonstrates that the electron transmissions are sensitive to the orientation of the molecule with respect to the electrode surface. In addition, channel decomposition of the scattering wave functions reveals that some unoccupied C20 molecular orbitals mainly contribute to the electron conduction through the molecular junction.

A Radiation Transfer Solver for Athena Using Short Characteristics

NASA Astrophysics Data System (ADS)

Davis, Shane W.; Stone, James M.; Jiang, Yan-Fei

2012-03-01

We describe the implementation of a module for the Athena magnetohydrodynamics (MHD) code that solves the time-independent, multi-frequency radiative transfer (RT) equation on multidimensional Cartesian simulation domains, including scattering and non-local thermodynamic equilibrium (LTE) effects. The module is based on well known and well tested algorithms developed for modeling stellar atmospheres, including the method of short characteristics to solve the RT equation, accelerated Lambda iteration to handle scattering and non-LTE effects, and parallelization via domain decomposition. The module serves several purposes: it can be used to generate spectra and images, to compute a variable Eddington tensor (VET) for full radiation MHD simulations, and to calculate the heating and cooling source terms in the MHD equations in flows where radiation pressure is small compared with gas pressure. For the latter case, the module is combined with the standard MHD integrators using operator splitting: we describe this approach in detail, including a new constraint on the time step for stability due to radiation diffusion modes. Implementation of the VET method for radiation pressure dominated flows is described in a companion paper. We present results from a suite of test problems for both the RT solver itself and for dynamical problems that include radiative heating and cooling. These tests demonstrate that the radiative transfer solution is accurate and confirm that the operator split method is stable, convergent, and efficient for problems of interest. We demonstrate there is no need to adopt ad hoc assumptions of questionable accuracy to solve RT problems in concert with MHD: the computational cost for our general-purpose module for simple (e.g., LTE gray) problems can be comparable to or less than a single time step of Athena's MHD integrators, and only few times more expensive than that for more general (non-LTE) problems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kieselmann, J; Bartzsch, S; Oelfke, U

Purpose: Microbeam Radiation Therapy is a preclinical method in radiation oncology that modulates radiation fields on a micrometre scale. Dose calculation is challenging due to arising dose gradients and therapeutically important dose ranges. Monte Carlo (MC) simulations, often used as gold standard, are computationally expensive and hence too slow for the optimisation of treatment parameters in future clinical applications. On the other hand, conventional kernel based dose calculation leads to inaccurate results close to material interfaces. The purpose of this work is to overcome these inaccuracies while keeping computation times low. Methods: A point kernel superposition algorithm is modified tomore » account for tissue inhomogeneities. Instead of conventional ray tracing approaches, methods from differential geometry are applied and the space around the primary photon interaction is locally warped. The performance of this approach is compared to MC simulations and a simple convolution algorithm (CA) for two different phantoms and photon spectra. Results: While peak doses of all dose calculation methods agreed within less than 4% deviations, the proposed approach surpassed a simple convolution algorithm in accuracy by a factor of up to 3 in the scatter dose. In a treatment geometry similar to possible future clinical situations differences between Monte Carlo and the differential geometry algorithm were less than 3%. At the same time the calculation time did not exceed 15 minutes. Conclusion: With the developed method it was possible to improve the dose calculation based on the CA method with respect to accuracy especially at sharp tissue boundaries. While the calculation is more extensive than for the CA method and depends on field size, the typical calculation time for a 20×20 mm{sup 2} field on a 3.4 GHz and 8 GByte RAM processor remained below 15 minutes. Parallelisation and optimisation of the algorithm could lead to further significant calculation time reductions.« less

7 CFR 762.121 - Loan purposes.

Code of Federal Regulations, 2011 CFR

2011-01-01

... feed, seed, fertilizer, pesticides, farm supplies, repairs and improvements which are to be expensed... the downpayment FO program under part 764 of this chapter; (2) Make capital improvements; examples include, but are not limited to, the construction, purchase, and improvement of a farm dwelling, service...

7 CFR 1210.342 - Exemption from assessment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... PROMOTION PLAN Watermelon Research and Promotion Plan Expenses and Assessments § 1210.342 Exemption from assessment. (a) The Board may exempt watermelons used for nonfood purposes from the provisions of this Plan...

Atomistic Modeling of Pd Site Preference in NiTi

NASA Technical Reports Server (NTRS)

Bozzolo, Guillermo; Noebe, Ronald D.; Mosca, Hugo O.

2004-01-01

An analysis of the site subsitution behavior of Pd in NiTi was performed using the BFS method for alloys. Through a combination of Monte Carlo simulations and detailed atom-by-atom energetic analyses of various computational cells, representing compositions of NiTi with up to 10 at% Pd, a detailed understanding of site occupancy of Pd in NiTi was revealed. Pd subsituted at the expense of Ni in a NiTi alloy will prefer the Ni-sites. Pd subsituted at the expense of Ti shows a very weak preference for Ti-sites that diminishes as the amount of Pd in the alloy increases and as the temperature increases.

Real-time algorithm for acoustic imaging with a microphone array.

PubMed

Huang, Xun

2009-05-01

Acoustic phased array has become an important testing tool in aeroacoustic research, where the conventional beamforming algorithm has been adopted as a classical processing technique. The computation however has to be performed off-line due to the expensive cost. An innovative algorithm with real-time capability is proposed in this work. The algorithm is similar to a classical observer in the time domain while extended for the array processing to the frequency domain. The observer-based algorithm is beneficial mainly for its capability of operating over sampling blocks recursively. The expensive experimental time can therefore be reduced extensively since any defect in a testing can be corrected instantaneously.

A qualitative analysis of bus simulator training on transit incidents : a case study in Florida. [Summary].

DOT National Transportation Integrated Search

2013-01-01

The simulator was once a very expensive, large-scale mechanical device for training military pilots or astronauts. Modern computers, linking sophisticated software and large-screen displays, have yielded simulators for the desktop or configured as sm...

Migration without migraines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lines, L.; Burton, A.; Lu, H.X.

Accurate velocity models are a necessity for reliable migration results. Velocity analysis generally involves the use of methods such as normal moveout analysis (NMO), seismic traveltime tomography, or iterative prestack migration. These techniques can be effective, and each has its own advantage or disadvantage. Conventional NMO methods are relatively inexpensive but basically require simplifying assumptions about geology. Tomography is a more general method but requires traveltime interpretation of prestack data. Iterative prestack depth migration is very general but is computationally expensive. In some cases, there is the opportunity to estimate vertical velocities by use of well information. The well informationmore » can be used to optimize poststack migrations, thereby eliminating some of the time and expense of iterative prestack migration. The optimized poststack migration procedure defined here computes the velocity model which minimizes the depth differences between seismic images and formation depths at the well by using a least squares inversion method. The optimization methods described in this paper will hopefully produce ``migrations without migraines.``« less

The curse of planning: dissecting multiple reinforcement-learning systems by taxing the central executive.

PubMed

Otto, A Ross; Gershman, Samuel J; Markman, Arthur B; Daw, Nathaniel D

2013-05-01

A number of accounts of human and animal behavior posit the operation of parallel and competing valuation systems in the control of choice behavior. In these accounts, a flexible but computationally expensive model-based reinforcement-learning system has been contrasted with a less flexible but more efficient model-free reinforcement-learning system. The factors governing which system controls behavior-and under what circumstances-are still unclear. Following the hypothesis that model-based reinforcement learning requires cognitive resources, we demonstrated that having human decision makers perform a demanding secondary task engenders increased reliance on a model-free reinforcement-learning strategy. Further, we showed that, across trials, people negotiate the trade-off between the two systems dynamically as a function of concurrent executive-function demands, and people's choice latencies reflect the computational expenses of the strategy they employ. These results demonstrate that competition between multiple learning systems can be controlled on a trial-by-trial basis by modulating the availability of cognitive resources.

The Curse of Planning: Dissecting multiple reinforcement learning systems by taxing the central executive

PubMed Central

Otto, A. Ross; Gershman, Samuel J.; Markman, Arthur B.; Daw, Nathaniel D.

2013-01-01

A number of accounts of human and animal behavior posit the operation of parallel and competing valuation systems in the control of choice behavior. Along these lines, a flexible but computationally expensive model-based reinforcement learning system has been contrasted with a less flexible but more efficient model-free reinforcement learning system. The factors governing which system controls behavior—and under what circumstances—are still unclear. Based on the hypothesis that model-based reinforcement learning requires cognitive resources, we demonstrate that having human decision-makers perform a demanding secondary task engenders increased reliance on a model-free reinforcement learning strategy. Further, we show that across trials, people negotiate this tradeoff dynamically as a function of concurrent executive function demands and their choice latencies reflect the computational expenses of the strategy employed. These results demonstrate that competition between multiple learning systems can be controlled on a trial-by-trial basis by modulating the availability of cognitive resources. PMID:23558545

Automated combinatorial method for fast and robust prediction of lattice thermal conductivity

NASA Astrophysics Data System (ADS)

Plata, Jose J.; Nath, Pinku; Usanmaz, Demet; Toher, Cormac; Fornari, Marco; Buongiorno Nardelli, Marco; Curtarolo, Stefano

The lack of computationally inexpensive and accurate ab-initio based methodologies to predict lattice thermal conductivity, κl, without computing the anharmonic force constants or performing time-consuming ab-initio molecular dynamics, is one of the obstacles preventing the accelerated discovery of new high or low thermal conductivity materials. The Slack equation is the best alternative to other more expensive methodologies but is highly dependent on two variables: the acoustic Debye temperature, θa, and the Grüneisen parameter, γ. Furthermore, different definitions can be used for these two quantities depending on the model or approximation. Here, we present a combinatorial approach based on the quasi-harmonic approximation to elucidate which definitions of both variables produce the best predictions of κl. A set of 42 compounds was used to test accuracy and robustness of all possible combinations. This approach is ideal for obtaining more accurate values than fast screening models based on the Debye model, while being significantly less expensive than methodologies that solve the Boltzmann transport equation.

Advertising expenditures in the nursing home sector: evaluating the need for and purpose of advertising.

PubMed

Kash, Bita A; Boyer, Gregory J

2008-01-01

Marketing and advertising activities in the nursing home sector have increased in recent years, following the example of hospitals and health systems. The reasons for this trend may be related to the growth in competition but are not clearly identified yet. Theoretically, advertising becomes necessary to gain an advantage over the competition. The purpose of this study was to identify the reasons for the variation in advertising expenditures among nursing homes in Texas. For this study, we merged 2003 data from the Texas Medicaid Nursing Facility Cost Report, the Texas Nursing Home Quality Reporting System, and the Area Resource File for Texas. Using the Herfindahl-Hirschman Index, we then examined the correlations between advertising expenses and the level of market concentration. We evaluated the association between advertising expenditures and market competition using two logistic and four linear regression models. Total advertising expenses in Texas nursing homes ranged from $0 to $165,000 per year. Higher advertising expenditures were associated with larger facilities, higher occupancy, and high Medicare census. Market competition, however, was not a significant predictor of such expenses. Advertising seems to be more resource-driven than market-driven. Therefore, some advertising expenditures may be unnecessary, may lack impact, and may even be wasteful. Reducing unnecessary advertising costs could free up resources, which may be allocated to necessary resident care activities.

Numerical Optimization Using Computer Experiments

NASA Technical Reports Server (NTRS)

Trosset, Michael W.; Torczon, Virginia

1997-01-01

Engineering design optimization often gives rise to problems in which expensive objective functions are minimized by derivative-free methods. We propose a method for solving such problems that synthesizes ideas from the numerical optimization and computer experiment literatures. Our approach relies on kriging known function values to construct a sequence of surrogate models of the objective function that are used to guide a grid search for a minimizer. Results from numerical experiments on a standard test problem are presented.

Understanding and Controlling Cost in Total Joint Arthroplasty.

PubMed

Alvarado, Carlos M; Bosco, Joseph

2015-06-01

Total joint arthrosplasty (TJA) is both a commonly performed successful intervention and an expensive procedure.As our population ages, the expense of these interventions is expected to grow and hence its impact on healthcare costs will also grow. To ensure that TJA is available to all those who would benefit, it is incumbent that healthcare providers control the cost of these procedures. As orthopaedic surgeons, we must be at the forefront of this effort. The purpose of this review is to outline strategies to control or even decrease TJA cost without negatively affecting outcomes.This concept is at the center of value-based medicine and must guide our decision-making processes.

Large-Scale Simulations of Plastic Neural Networks on Neuromorphic Hardware

PubMed Central

Knight, James C.; Tully, Philip J.; Kaplan, Bernhard A.; Lansner, Anders; Furber, Steve B.

2016-01-01

SpiNNaker is a digital, neuromorphic architecture designed for simulating large-scale spiking neural networks at speeds close to biological real-time. Rather than using bespoke analog or digital hardware, the basic computational unit of a SpiNNaker system is a general-purpose ARM processor, allowing it to be programmed to simulate a wide variety of neuron and synapse models. This flexibility is particularly valuable in the study of biological plasticity phenomena. A recently proposed learning rule based on the Bayesian Confidence Propagation Neural Network (BCPNN) paradigm offers a generic framework for modeling the interaction of different plasticity mechanisms using spiking neurons. However, it can be computationally expensive to simulate large networks with BCPNN learning since it requires multiple state variables for each synapse, each of which needs to be updated every simulation time-step. We discuss the trade-offs in efficiency and accuracy involved in developing an event-based BCPNN implementation for SpiNNaker based on an analytical solution to the BCPNN equations, and detail the steps taken to fit this within the limited computational and memory resources of the SpiNNaker architecture. We demonstrate this learning rule by learning temporal sequences of neural activity within a recurrent attractor network which we simulate at scales of up to 2.0 × 104 neurons and 5.1 × 107 plastic synapses: the largest plastic neural network ever to be simulated on neuromorphic hardware. We also run a comparable simulation on a Cray XC-30 supercomputer system and find that, if it is to match the run-time of our SpiNNaker simulation, the super computer system uses approximately 45× more power. This suggests that cheaper, more power efficient neuromorphic systems are becoming useful discovery tools in the study of plasticity in large-scale brain models. PMID:27092061

Storage and computationally efficient permutations of factorized covariance and square-root information arrays

NASA Technical Reports Server (NTRS)

Muellerschoen, R. J.

1988-01-01

A unified method to permute vector stored Upper triangular Diagonal factorized covariance and vector stored upper triangular Square Root Information arrays is presented. The method involves cyclic permutation of the rows and columns of the arrays and retriangularization with fast (slow) Givens rotations (reflections). Minimal computation is performed, and a one dimensional scratch array is required. To make the method efficient for large arrays on a virtual memory machine, computations are arranged so as to avoid expensive paging faults. This method is potentially important for processing large volumes of radio metric data in the Deep Space Network.

Habitual control of goal selection in humans

PubMed Central

Cushman, Fiery; Morris, Adam

2015-01-01

Humans choose actions based on both habit and planning. Habitual control is computationally frugal but adapts slowly to novel circumstances, whereas planning is computationally expensive but can adapt swiftly. Current research emphasizes the competition between habits and plans for behavioral control, yet many complex tasks instead favor their integration. We consider a hierarchical architecture that exploits the computational efficiency of habitual control to select goals while preserving the flexibility of planning to achieve those goals. We formalize this mechanism in a reinforcement learning setting, illustrate its costs and benefits, and experimentally demonstrate its spontaneous application in a sequential decision-making task. PMID:26460050

Current Grid Generation Strategies and Future Requirements in Hypersonic Vehicle Design, Analysis and Testing

NASA Technical Reports Server (NTRS)

Papadopoulos, Periklis; Venkatapathy, Ethiraj; Prabhu, Dinesh; Loomis, Mark P.; Olynick, Dave; Arnold, James O. (Technical Monitor)

1998-01-01

Recent advances in computational power enable computational fluid dynamic modeling of increasingly complex configurations. A review of grid generation methodologies implemented in support of the computational work performed for the X-38 and X-33 are presented. In strategizing topological constructs and blocking structures factors considered are the geometric configuration, optimal grid size, numerical algorithms, accuracy requirements, physics of the problem at hand, computational expense, and the available computer hardware. Also addressed are grid refinement strategies, the effects of wall spacing, and convergence. The significance of grid is demonstrated through a comparison of computational and experimental results of the aeroheating environment experienced by the X-38 vehicle. Special topics on grid generation strategies are also addressed to model control surface deflections, and material mapping.

28 CFR 94.21 - Eligibility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Administration DEPARTMENT OF JUSTICE (CONTINUED) CRIME VICTIM SERVICES International Terrorism Victim Expense... terrorism or his representative, pursuant to 42 U.S.C. 10603c(a)(3)(A). For purposes of eligibility for this... was one of international terrorism, within the meaning of that section. (b) Reimbursement shall be...

28 CFR 94.21 - Eligibility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Administration DEPARTMENT OF JUSTICE (CONTINUED) CRIME VICTIM SERVICES International Terrorism Victim Expense... terrorism or his representative, pursuant to 42 U.S.C. 10603c(a)(3)(A). For purposes of eligibility for this... was one of international terrorism, within the meaning of that section. (b) Reimbursement shall be...

28 CFR 94.21 - Eligibility.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Administration DEPARTMENT OF JUSTICE (CONTINUED) CRIME VICTIM SERVICES International Terrorism Victim Expense... terrorism or his representative, pursuant to 42 U.S.C. 10603c(a)(3)(A). For purposes of eligibility for this... was one of international terrorism, within the meaning of that section. (b) Reimbursement shall be...

28 CFR 94.21 - Eligibility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Administration DEPARTMENT OF JUSTICE (CONTINUED) CRIME VICTIM SERVICES International Terrorism Victim Expense... terrorism or his representative, pursuant to 42 U.S.C. 10603c(a)(3)(A). For purposes of eligibility for this... was one of international terrorism, within the meaning of that section. (b) Reimbursement shall be...

28 CFR 94.21 - Eligibility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Administration DEPARTMENT OF JUSTICE (CONTINUED) CRIME VICTIM SERVICES International Terrorism Victim Expense... terrorism or his representative, pursuant to 42 U.S.C. 10603c(a)(3)(A). For purposes of eligibility for this... was one of international terrorism, within the meaning of that section. (b) Reimbursement shall be...

17 CFR 256.426.1 - Donations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Donations. 256.426.1 Section... COMPANY ACT OF 1935 Income and Expense Accounts § 256.426.1 Donations. This account shall include all payments or donations for charitable, social or community welfare purposes. ...

17 CFR 256.426.1 - Donations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 3 2011-04-01 2011-04-01 false Donations. 256.426.1 Section... COMPANY ACT OF 1935 Income and Expense Accounts § 256.426.1 Donations. This account shall include all payments or donations for charitable, social or community welfare purposes. ...

Financing Medical Education, 1982-1983.

ERIC Educational Resources Information Center

Terrell, Charles; And Others

Information is presented on medical student financial aid programs and factors that should be addressed by the professional premedical/medical school advisor or the student about to enter medical school. Topics include the following: cost estimates; financial need and assistance; student expenses; purpose of financial assistance; applications…

Cathodic protection of culverts-field application and expert system : technical summary.

DOT National Transportation Integrated Search

1999-06-01

Louisiana used metal culverts throughout the state for drainage purposes. Culverts made of concrete were also used, but large concrete culverts were more expensive and the foundation had to be able to bear their weight. However, the use of metal culv...

7 CFR 3560.306 - Reserve account.

Code of Federal Regulations, 2014 CFR

2014-01-01

... approved capital needs assessment. The approval to increase reserve account funding levels will take into...) Purpose. To meet the major capital expense needs of a housing project, borrowers must establish and... the surplus funds to address capital needs, make a deposit in the housing project's reserve account...

7 CFR 3560.306 - Reserve account.

Code of Federal Regulations, 2012 CFR

2012-01-01

... approved capital needs assessment. The approval to increase reserve account funding levels will take into...) Purpose. To meet the major capital expense needs of a housing project, borrowers must establish and... the surplus funds to address capital needs, make a deposit in the housing project's reserve account...

7 CFR 3560.306 - Reserve account.

Code of Federal Regulations, 2013 CFR

2013-01-01

... approved capital needs assessment. The approval to increase reserve account funding levels will take into...) Purpose. To meet the major capital expense needs of a housing project, borrowers must establish and... the surplus funds to address capital needs, make a deposit in the housing project's reserve account...

7 CFR 3560.306 - Reserve account.

Code of Federal Regulations, 2011 CFR

2011-01-01

... approved capital needs assessment. The approval to increase reserve account funding levels will take into...) Purpose. To meet the major capital expense needs of a housing project, borrowers must establish and... the surplus funds to address capital needs, make a deposit in the housing project's reserve account...

Development of a special purpose spacecraft coating, phase 4

NASA Technical Reports Server (NTRS)

Gillman, H. D.

1980-01-01

Coating formulations based on a fluorocarbon resin were evaluated for use on spacecraft exteriors. Formulations modified with an acrylic resin were found to have excellent offgassing properties. A much less expensive process for increasing to solid content of the fluorocarbon latex was developed.

OPEX: Optimized Eccentricity Computation in Graphs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henderson, Keith

2011-11-14

Real-world graphs have many properties of interest, but often these properties are expensive to compute. We focus on eccentricity, radius and diameter in this work. These properties are useful measures of the global connectivity patterns in a graph. Unfortunately, computing eccentricity for all nodes is O(n2) for a graph with n nodes. We present OPEX, a novel combination of optimizations which improves computation time of these properties by orders of magnitude in real-world experiments on graphs of many different sizes. We run OPEX on graphs with up to millions of links. OPEX gives either exact results or bounded approximations, unlikemore » its competitors which give probabilistic approximations or sacrifice node-level information (eccentricity) to compute graphlevel information (diameter).« less

A DNA sequence analysis package for the IBM personal computer.

PubMed Central

Lagrimini, L M; Brentano, S T; Donelson, J E

1984-01-01

We present here a collection of DNA sequence analysis programs, called "PC Sequence" (PCS), which are designed to run on the IBM Personal Computer (PC). These programs are written in IBM PC compiled BASIC and take full advantage of the IBM PC's speed, error handling, and graphics capabilities. For a modest initial expense in hardware any laboratory can use these programs to quickly perform computer analysis on DNA sequences. They are written with the novice user in mind and require very little training or previous experience with computers. Also provided are a text editing program for creating and modifying DNA sequence files and a communications program which enables the PC to communicate with and collect information from mainframe computers and DNA sequence databases. PMID:6546433

HEALTHY study school food service revenue and expense report.

PubMed

Treviño, Roberto P; Pham, Trang; Mobley, Connie; Hartstein, Jill; El Ghormli, Laure; Songer, Thomas

2012-09-01

Food service directors have a concern that federal reimbursement is not meeting the demands of increasing costs of healthier meals. The purpose of this article is to report the food option changes and the annual revenues and expenses of the school food service environment. The HEALTHY study was a 3-year (2006 to 2009) randomized, cluster-designed trial conducted in 42 middle schools at 7 field centers. The schools selected had at least 50% of students who were eligible for free or reduced-price lunch or who belonged to a minority group. A randomly assigned half of the HEALTHY schools received a school health intervention program consisting of 4 integrated components: nutrition, physical activity, behavioral knowledge and skills, and social marketing. The nutrition component consisted of changing the meal plans to meet 5 nutrition goals. Revenue and expense data were collected from income statements, federal meal records, à la carte sale sheets, school store sale sheets, donated money/food records, and vending machines. Although more intervention schools reached the nutritional goals than control schools, revenues and expenses were not significantly different between groups. The HEALTHY study showed no adverse effect of school food policies on food service finances. © 2012, American School Health Association.

HEALTHY Study School Food Service Revenue and Expense Report

PubMed Central

Treviño, Roberto P.; Pham, Trang; Mobley, Connie; Hartstein, Jill; El ghormli, Laure; Songer, Thomas

2013-01-01

BACKGROUND Food service directors have a concern that federal reimbursement is not meeting the demands of increasing costs of healthier meals. The purpose of this article is to report the food option changes and the annual revenues and expenses of the school food service environment. METHODS The HEALTHY study was a 3-year (2006 to 2009) randomized, cluster-designed trial conducted in 42 middle schools at 7 field centers. The schools selected had at least 50% of students who were eligible for free or reduced-price lunch or who belonged to a minority group. A randomly assigned half of the HEALTHY schools received a school health intervention program consisting of 4 integrated components: nutrition, physical activity, behavioral knowledge and skills, and social marketing. The nutrition component consisted of changing the meal plans to meet 5 nutrition goals. Revenue and expense data were collected from income statements, federal meal records, à la carte sale sheets, school store sale sheets, donated money/food records, and vending machines. RESULTS Although more intervention schools reached the nutritional goals than control schools, revenues and expenses were not significantly different between groups. CONCLUSION The HEALTHY study showed no adverse effect of school food policies on food service finances. PMID:22882105

A City Manager Looks at Trends Affecting Public Libraries.

ERIC Educational Resources Information Center

Kemp, Roger L.

1999-01-01

Highlights some important conditions, both present and future, which will have an impact on public libraries. Discusses holding down expenses, including user fees, alternative funding sources, and private cosponsorship of programs; increasing productivity; use of computers and new technologies; staff development and internal marketing; improving…

Computer Conferencing and Electronic Mail.

ERIC Educational Resources Information Center

Kaye, Tony

This paper discusses a number of problems associated with distance education methods used in adult education and training fields, including limited opportunities for dialogue and group interaction among students and between students and tutors; the expense of updating and modifying mass-produced print and audiovisual materials; and the relative…

26 CFR 1.460-1 - Long-term contracts.

Code of Federal Regulations, 2011 CFR

2011-04-01

... attributable to designing the satellite and developing computer software using the PCM. Example 7. Non-long... customer has title to, control over, or bears the risk of loss from, the property manufactured or... as design and engineering costs, other than expenses attributable to bidding and negotiating...

26 CFR 1.460-1 - Long-term contracts.

Code of Federal Regulations, 2012 CFR

2012-04-01

... attributable to designing the satellite and developing computer software using the PCM. Example 7. Non-long... customer has title to, control over, or bears the risk of loss from, the property manufactured or... as design and engineering costs, other than expenses attributable to bidding and negotiating...

26 CFR 1.460-1 - Long-term contracts.

Code of Federal Regulations, 2014 CFR

2014-04-01

... attributable to designing the satellite and developing computer software using the PCM. Example 7. Non-long... customer has title to, control over, or bears the risk of loss from, the property manufactured or... as design and engineering costs, other than expenses attributable to bidding and negotiating...

26 CFR 1.460-1 - Long-term contracts.

Code of Federal Regulations, 2013 CFR

2013-04-01

... attributable to designing the satellite and developing computer software using the PCM. Example 7. Non-long... customer has title to, control over, or bears the risk of loss from, the property manufactured or... as design and engineering costs, other than expenses attributable to bidding and negotiating...

Maps and Map Learning in Social Studies

ERIC Educational Resources Information Center

Bednarz, Sarah Witham; Acheson, Gillian; Bednarz, Robert S.

2006-01-01

The importance of maps and other graphic representations has become more important to geography and geographers. This is due to the development and widespread diffusion of geographic (spatial) technologies. As computers and silicon chips have become more capable and less expensive, geographic information systems (GIS), global positioning satellite…

Multi-Protocol LAN Design and Implementation: A Case Study.

ERIC Educational Resources Information Center

Hazari, Sunil

1995-01-01

Reports on the installation of a local area network (LAN) at East Carolina University. Topics include designing the network; computer labs and electronic mail; Internet connectivity; LAN expenses; and recommendations on planning, equipment, administration, and training. A glossary of networking terms is also provided. (AEF)

Efficient computation of aerodynamic influence coefficients for aeroelastic analysis on a transputer network

NASA Technical Reports Server (NTRS)

Janetzke, David C.; Murthy, Durbha V.

1991-01-01

Aeroelastic analysis is multi-disciplinary and computationally expensive. Hence, it can greatly benefit from parallel processing. As part of an effort to develop an aeroelastic capability on a distributed memory transputer network, a parallel algorithm for the computation of aerodynamic influence coefficients is implemented on a network of 32 transputers. The aerodynamic influence coefficients are calculated using a 3-D unsteady aerodynamic model and a parallel discretization. Efficiencies up to 85 percent were demonstrated using 32 processors. The effect of subtask ordering, problem size, and network topology are presented. A comparison to results on a shared memory computer indicates that higher speedup is achieved on the distributed memory system.

Off the Shelf Cloud Robotics for the Smart Home: Empowering a Wireless Robot through Cloud Computing.

PubMed

Ramírez De La Pinta, Javier; Maestre Torreblanca, José María; Jurado, Isabel; Reyes De Cozar, Sergio

2017-03-06

In this paper, we explore the possibilities offered by the integration of home automation systems and service robots. In particular, we examine how advanced computationally expensive services can be provided by using a cloud computing approach to overcome the limitations of the hardware available at the user's home. To this end, we integrate two wireless low-cost, off-the-shelf systems in this work, namely, the service robot Rovio and the home automation system Z-wave. Cloud computing is used to enhance the capabilities of these systems so that advanced sensing and interaction services based on image processing and voice recognition can be offered.

Off the Shelf Cloud Robotics for the Smart Home: Empowering a Wireless Robot through Cloud Computing

PubMed Central

Ramírez De La Pinta, Javier; Maestre Torreblanca, José María; Jurado, Isabel; Reyes De Cozar, Sergio

2017-01-01

In this paper, we explore the possibilities offered by the integration of home automation systems and service robots. In particular, we examine how advanced computationally expensive services can be provided by using a cloud computing approach to overcome the limitations of the hardware available at the user’s home. To this end, we integrate two wireless low-cost, off-the-shelf systems in this work, namely, the service robot Rovio and the home automation system Z-wave. Cloud computing is used to enhance the capabilities of these systems so that advanced sensing and interaction services based on image processing and voice recognition can be offered. PMID:28272305

cosmoabc: Likelihood-free inference for cosmology

NASA Astrophysics Data System (ADS)

Ishida, Emille E. O.; Vitenti, Sandro D. P.; Penna-Lima, Mariana; Trindade, Arlindo M.; Cisewski, Jessi; M.; de Souza, Rafael; Cameron, Ewan; Busti, Vinicius C.

2015-05-01

Approximate Bayesian Computation (ABC) enables parameter inference for complex physical systems in cases where the true likelihood function is unknown, unavailable, or computationally too expensive. It relies on the forward simulation of mock data and comparison between observed and synthetic catalogs. cosmoabc is a Python Approximate Bayesian Computation (ABC) sampler featuring a Population Monte Carlo variation of the original ABC algorithm, which uses an adaptive importance sampling scheme. The code can be coupled to an external simulator to allow incorporation of arbitrary distance and prior functions. When coupled with the numcosmo library, it has been used to estimate posterior probability distributions over cosmological parameters based on measurements of galaxy clusters number counts without computing the likelihood function.

A Zonal Approach for Prediction of Jet Noise

NASA Technical Reports Server (NTRS)

Shih, S. H.; Hixon, D. R.; Mankbadi, Reda R.

1995-01-01

A zonal approach for direct computation of sound generation and propagation from a supersonic jet is investigated. The present work splits the computational domain into a nonlinear, acoustic-source regime and a linear acoustic wave propagation regime. In the nonlinear regime, the unsteady flow is governed by the large-scale equations, which are the filtered compressible Navier-Stokes equations. In the linear acoustic regime, the sound wave propagation is described by the linearized Euler equations. Computational results are presented for a supersonic jet at M = 2. 1. It is demonstrated that no spurious modes are generated in the matching region and the computational expense is reduced substantially as opposed to fully large-scale simulation.

47 CFR 32.2124 - General purpose computers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false General purpose computers. 32.2124 Section 32.2124 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES UNIFORM... General purpose computers. (a) This account shall include the original cost of computers and peripheral...

47 CFR 32.2124 - General purpose computers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 2 2011-10-01 2011-10-01 false General purpose computers. 32.2124 Section 32.2124 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES UNIFORM... General purpose computers. (a) This account shall include the original cost of computers and peripheral...

47 CFR 32.2124 - General purpose computers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 2 2014-10-01 2014-10-01 false General purpose computers. 32.2124 Section 32.2124 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES UNIFORM... General purpose computers. (a) This account shall include the original cost of computers and peripheral...

47 CFR 32.2124 - General purpose computers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 2 2013-10-01 2013-10-01 false General purpose computers. 32.2124 Section 32.2124 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES UNIFORM... General purpose computers. (a) This account shall include the original cost of computers and peripheral...

47 CFR 32.2124 - General purpose computers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 2 2012-10-01 2012-10-01 false General purpose computers. 32.2124 Section 32.2124 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES UNIFORM... General purpose computers. (a) This account shall include the original cost of computers and peripheral...

26 CFR 53.4945-6 - Expenditures for noncharitable purposes.

Code of Federal Regulations, 2010 CFR

2010-04-01

... a direct charitable act or the making of a program-related investment, or (ii) Through compliance... be treated as taxable expenditures under section 4945(d)(5): (i) Expenditures to acquire investments... in section 170(c)(2)(B), (ii) Reasonable expenses with respect to investments described in...

75 FR 10492 - Tribal Self-Governance Program; Negotiation Cooperative Agreement

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-08

...-2010-IHS-TSGN-0001] Tribal Self-Governance Program; Negotiation Cooperative Agreement Announcement Type... Description The purpose of the Negotiation Cooperative Agreement is to provide resources to Tribes interested... Negotiation Cooperative Agreement provides a Tribe with funds to help cover the expenses involved in preparing...

IRA's for College Savings.

ERIC Educational Resources Information Center

McPherson, Michael S.; Byce, Charles R.

This paper analyzes the merits of proposals to encourage saving for college by permitting families to use funds accumulated in Individual Retirement Accounts (IRA's) to pay postsecondary education expenses. The paper argues that tax treatment of such expenditures might parallel that for expenditures of IRA's for retirement purposes--deferring tax…

11 CFR 9008.50 - Scope and definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... funds to defray convention expenses and to promote the convention city and its commerce. (b) Definition..., business league, chamber of commerce, real estate board, board of trade, or convention bureau, that... inure to the benefit of any private shareholder or individual; and (3) Its principal purpose is the...

12 CFR 1402.20 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... costs are overhead expenses such as costs of space, and heating or lighting the facility in which the... operates a program or programs of scholarly research. (d) Noncommercial scientific institution refers to an... purpose of conducting scientific research, the results of which are not intended to promote any particular...

12 CFR 1402.20 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... costs are overhead expenses such as costs of space, and heating or lighting the facility in which the... operates a program or programs of scholarly research. (d) Noncommercial scientific institution refers to an... purpose of conducting scientific research, the results of which are not intended to promote any particular...

12 CFR 1402.20 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... costs are overhead expenses such as costs of space, and heating or lighting the facility in which the... operates a program or programs of scholarly research. (d) Noncommercial scientific institution refers to an... purpose of conducting scientific research, the results of which are not intended to promote any particular...

47 CFR 36.222 - Nonoperating income and expenses-Account 7300.

Code of Federal Regulations, 2010 CFR

2010-10-01

... charitable, social or community welfare purposes, employee activities, membership dues and fees in service... Construction—Account 2003. The portion reflecting costs for social and community welfare contributions and fees...—Account 7300. (a) Only allowance for funds used during construction, and charitable, social and community...

48 CFR 9903.302-4 - Illustrations of changes which do not meet the definition of “Change to a cost accounting practice.”

Code of Federal Regulations, 2014 CFR

2014-10-01

... operated for the purpose of doing research for development of products related to nuclear energy (e) The projects and expenses related to nuclear energy projects have been terminated. No transfer of these...

48 CFR 9903.302-4 - Illustrations of changes which do not meet the definition of “Change to a cost accounting practice.”

Code of Federal Regulations, 2013 CFR

2013-10-01

... operated for the purpose of doing research for development of products related to nuclear energy (e) The projects and expenses related to nuclear energy projects have been terminated. No transfer of these...

48 CFR 9903.302-4 - Illustrations of changes which do not meet the definition of “Change to a cost accounting practice.”

Code of Federal Regulations, 2012 CFR

2012-10-01

... operated for the purpose of doing research for development of products related to nuclear energy (e) The projects and expenses related to nuclear energy projects have been terminated. No transfer of these...

26 CFR 1.212-1 - Nontrade or nonbusiness expenses.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., or (ii) for the management, conservation, or maintenance of property held for the production of such... management, conservation, or maintenance of a building devoted to rental purposes are deductible... not carried on for the production or collection of income or for the management, conservation, or...

26 CFR 1.212-1 - Nontrade or nonbusiness expenses.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., or (ii) for the management, conservation, or maintenance of property held for the production of such... management, conservation, or maintenance of a building devoted to rental purposes are deductible... not carried on for the production or collection of income or for the management, conservation, or...

26 CFR 1.212-1 - Nontrade or nonbusiness expenses.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., or (ii) for the management, conservation, or maintenance of property held for the production of such... management, conservation, or maintenance of a building devoted to rental purposes are deductible... not carried on for the production or collection of income or for the management, conservation, or...

26 CFR 1.212-1 - Nontrade or nonbusiness expenses.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., or (ii) for the management, conservation, or maintenance of property held for the production of such... management, conservation, or maintenance of a building devoted to rental purposes are deductible... not carried on for the production or collection of income or for the management, conservation, or...

Strategic Planning Tools for Large-Scale Technology-Based Assessments

ERIC Educational Resources Information Center

Koomen, Marten; Zoanetti, Nathan

2018-01-01

Education systems are increasingly being called upon to implement new technology-based assessment systems that generate efficiencies, better meet changing stakeholder expectations, or fulfil new assessment purposes. These assessment systems require coordinated organisational effort to implement and can be expensive in time, skill and other…

48 CFR 9903.302-4 - Illustrations of changes which do not meet the definition of “Change to a cost accounting practice.”

Code of Federal Regulations, 2010 CFR

2010-10-01

... operated for the purpose of doing research for development of products related to nuclear energy (e) The projects and expenses related to nuclear energy projects have been terminated. No transfer of these...

Electronic Sensors: Making the Connection

ERIC Educational Resources Information Center

Johnson, Richard T.; Cotton, Samuel E.

2008-01-01

For educational purposes it is not necessary to use expensive commercial-grade equipment to teach students about commonly used sensors. Schools frequently have limited funds for acquiring educational materials; therefore, purchasing sensors identical to those used in large-scale industry is not an option. By purchasing small-scale components that…

Design and implementation of an inexpensive target scanner for the growth of thin films by the laser-ablation process

NASA Astrophysics Data System (ADS)

Rao, A. M.; Moodera, J. S.

1991-04-01

The design of a target scanner that is inexpensive and easy to construct is described. Our target scanner system does not require an expensive personal computer to raster the laser beam uniformily over the target material, unlike the computer driven target scanners that are currently being used in the thin-film industry. The main components of our target scanner comprise a bidirectional motor, a two-position switch, and a standard optical mirror mount.

CLOCS (Computer with Low Context-Switching Time) Operating System Reference Documents

DTIC Science & Technology

1988-05-06

system are met. In sum, real-time constraints make programming harder in genera420], because they add a whole new dimension - the time dimension - to ...be preempted until it allows itself to be. More is Stored; Less is Computed Alan Jay Smith, of Berkeley, has said that any program can be made five...times as swift to run, at the expense of five times the storage space. While his numbers may be questioned, his premise may not: programs can be made

Experimental realization of an entanglement access network and secure multi-party computation

NASA Astrophysics Data System (ADS)

Chang, X.-Y.; Deng, D.-L.; Yuan, X.-X.; Hou, P.-Y.; Huang, Y.-Y.; Duan, L.-M.

2016-07-01

To construct a quantum network with many end users, it is critical to have a cost-efficient way to distribute entanglement over different network ends. We demonstrate an entanglement access network, where the expensive resource, the entangled photon source at the telecom wavelength and the core communication channel, is shared by many end users. Using this cost-efficient entanglement access network, we report experimental demonstration of a secure multiparty computation protocol, the privacy-preserving secure sum problem, based on the network quantum cryptography.

Experimental realization of an entanglement access network and secure multi-party computation

NASA Astrophysics Data System (ADS)

Chang, Xiuying; Deng, Donglin; Yuan, Xinxing; Hou, Panyu; Huang, Yuanyuan; Duan, Luming; Department of Physics, University of Michigan Collaboration; CenterQuantum Information in Tsinghua University Team

2017-04-01

To construct a quantum network with many end users, it is critical to have a cost-efficient way to distribute entanglement over different network ends. We demonstrate an entanglement access network, where the expensive resource, the entangled photon source at the telecom wavelength and the core communication channel, is shared by many end users. Using this cost-efficient entanglement access network, we report experimental demonstration of a secure multiparty computation protocol, the privacy-preserving secure sum problem, based on the network quantum cryptography.

11 CFR 9035.1 - Campaign expenditure limitation; compliance and fundraising exemptions.

Code of Federal Regulations, 2013 CFR

2013-01-01

...: (i) Coordinated expenditures under 11 CFR 109.20; (ii) Coordinated communications under 11 CFR 109.21... coordinated communications pursuant to 11 CFR 109.37 that are in-kind contributions received or accepted by... this section, 100% of salary, overhead and computer expenses incurred after a candidate's date of...

11 CFR 9035.1 - Campaign expenditure limitation; compliance and fundraising exemptions.

Code of Federal Regulations, 2011 CFR

2011-01-01

...: (i) Coordinated expenditures under 11 CFR 109.20; (ii) Coordinated communications under 11 CFR 109.21... coordinated communications pursuant to 11 CFR 109.37 that are in-kind contributions received or accepted by... this section, 100% of salary, overhead and computer expenses incurred after a candidate's date of...

Do Early Outs Work Out? Teacher Early Retirement Incentive Plans.

ERIC Educational Resources Information Center

Brown, Herb R.; Repa, J. Theodore

1993-01-01

School districts offer teacher early retirement incentive plans (TERIPs) as an opportunity to hire less expensive teachers, reduce fringe benefits costs, and eliminate teaching positions. Discusses reasons for teachers to accept TERIP, and describes a computer model that allows school officials to calculate and compare costs incurred if an…

14 CFR Section 24 - Profit and Loss Elements

Code of Federal Regulations, 2014 CFR

2014-01-01

... Maintenance Burden” shall reflect a memorandum allocation by each air carrier of the total expenses included... operation personnel in readiness for assignment to an in-flight status. (2) “Maintenance” shall include all... line 5 of this schedule. (f) “Operating Profit (Loss)” shall be computed by subtracting the total...

14 CFR Section 24 - Profit and Loss Elements

Code of Federal Regulations, 2013 CFR

2013-01-01

... Maintenance Burden” shall reflect a memorandum allocation by each air carrier of the total expenses included... operation personnel in readiness for assignment to an in-flight status. (2) “Maintenance” shall include all... line 5 of this schedule. (f) “Operating Profit (Loss)” shall be computed by subtracting the total...

14 CFR Section 24 - Profit and Loss Elements

Code of Federal Regulations, 2011 CFR

2011-01-01

... Maintenance Burden” shall reflect a memorandum allocation by each air carrier of the total expenses included... operation personnel in readiness for assignment to an in-flight status. (2) “Maintenance” shall include all... line 5 of this schedule. (f) “Operating Profit (Loss)” shall be computed by subtracting the total...

26 CFR 54.4980B-5 - COBRA continuation coverage.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (for example, because of a divorce), the family deductible may be computed separately for each... the year. The plan provides that upon the divorce of a covered employee, coverage will end immediately... family had accumulated $420 of covered expenses before the divorce, as follows: $70 by each parent, $200...

Reinforce Networking Theory with OPNET Simulation

ERIC Educational Resources Information Center

Guo, Jinhua; Xiang, Weidong; Wang, Shengquan

2007-01-01

As networking systems have become more complex and expensive, hands-on experiments based on networking simulation have become essential for teaching the key computer networking topics to students. The simulation approach is the most cost effective and highly useful because it provides a virtual environment for an assortment of desirable features…

A DIY Ultrasonic Signal Generator for Sound Experiments

ERIC Educational Resources Information Center

Riad, Ihab F.

2018-01-01

Many physics departments around the world have electronic and mechanical workshops attached to them that can help build experimental setups and instruments for research and the training of undergraduate students. The workshops are usually run by experienced technicians and equipped with expensive lathing, computer numerical control (CNC) machines,…

Teaching Children Thinking

ERIC Educational Resources Information Center

Papert, Seymour

2005-01-01

The phrase "technology and education" usually means inventing new gadgets to teach the same old stuff in a thinly disguised version of the same old way. Moreover, if the gadgets are computers, the same old teaching becomes incredibly more expensive and biased towards its dullest parts, namely the kind of rote learning in which measurable…

Don't Outsource It. Do It!

ERIC Educational Resources Information Center

Nuzzo, David

1999-01-01

Discusses outsourcing in library technical-services departments and how to make the department more cost-effective to limit the need for outsourcing as a less expensive alternative. Topics include experiences at State University of New York at Buffalo; efficient use of computers for in-house programs; and staff participation. (LRW)

Recording Computer-Based Demonstrations and Board Work

ERIC Educational Resources Information Center

Spencer, Neil H.

2010-01-01

This article describes how a demonstration of statistical (or other) software can be recorded without expensive video equipment and saved as a presentation to be displayed with software such as Microsoft PowerPoint. Work carried out on a tablet PC, for example, can also be recorded in this fashion.

Common Sense Wordworking III: Desktop Publishing and Desktop Typesetting.

ERIC Educational Resources Information Center

Crawford, Walt

1987-01-01

Describes current desktop publishing packages available for microcomputers and discusses the disadvantages, especially in cost, for most personal computer users. Also described is a less expensive alternative technology--desktop typesetting--which meets the requirements of users who do not need elaborate techniques for combining text and graphics.…

CRITTERS! A Realistic Simulation for Teaching Evolutionary Biology

ERIC Educational Resources Information Center

Latham, Luke G., II; Scully, Erik P.

2008-01-01

Evolutionary processes can be studied in nature and in the laboratory, but time and financial constraints result in few opportunities for undergraduate and high school students to explore the agents of genetic change in populations. One alternative to time consuming and expensive teaching laboratories is the use of computer simulations. We…

Learning Hierarchical Skills for Game Agents from Video of Human Behavior

DTIC Science & Technology

2009-01-01

intelligent agents for computer games is an im- portant aspect of game development . However, traditional methods are expensive, and the resulting agents...Constructing autonomous agents is an essential task in game development . In this paper, we outlined a system that an- alyzes preprocessed video footage of

Processing Polarity: How the Ungrammatical Intrudes on the Grammatical

ERIC Educational Resources Information Center

Vasishth, Shravan; Brussow, Sven; Lewis, Richard L.; Drenhaus, Heiner

2008-01-01

A central question in online human sentence comprehension is, "How are linguistic relations established between different parts of a sentence?" Previous work has shown that this dependency resolution process can be computationally expensive, but the underlying reasons for this are still unclear. This article argues that dependency…

Low Cost Alternatives to Commercial Lab Kits for Physics Experiments

ERIC Educational Resources Information Center

Kodejška, C.; De Nunzio, G.; Kubinek, R.; Ríha, J.

2015-01-01

Conducting experiments in physics using modern measuring techniques, and particularly those utilizing computers, is often much more attractive to students than conducting experiments conventionally. However, the cost of professional kits in the Czech Republic is still very expensive for many schools. The basic equipment for one student workplace…

Long-Range Budget Planning in Private Colleges and Universities

ERIC Educational Resources Information Center

Hopkins, David S. P.; Massy, William F.

1977-01-01

Computer models have greatly assisted budget planners in privately financed institutions to identify and analyze major financial problems. The implementation of such a model at Stanford University is described that considers student aid expenses, indirect cost recovery, endowments, price elasticity of enrollment, and student/faculty ratios.…

CASL VMA Milestone Report FY16 (L3:VMA.VUQ.P13.08): Westinghouse Mixing with STAR-CCM+

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilkey, Lindsay Noelle

2016-09-30

STAR-CCM+ (STAR) is a high-resolution computational fluid dynamics (CFD) code developed by CD-adapco. STAR includes validated physics models and a full suite of turbulence models including ones from the k-ε and k-ω families. STAR is currently being developed to be able to do two phase flows, but the current focus of the software is single phase flow. STAR can use imported meshes or use the built in meshing software to create computation domains for CFD. Since the solvers generally require a fine mesh for good computational results, the meshes used with STAR tend to number in the millions of cells,more » with that number growing with simulation and geometry complexity. The time required to model the flow of a full 5x5 Mixing Vane Grid Assembly (5x5MVG) in the current STAR configuration is on the order of hours, and can be very computationally expensive. COBRA-TF (CTF) is a low-resolution subchannel code that can be trained using high fidelity data from STAR. CTF does not have turbulence models and instead uses a turbulent mixing coefficient β. With a properly calibrated β, CTF can be used a low-computational cost alternative to expensive full CFD calculations performed with STAR. During the Hi2Lo work with CTF and STAR, STAR-CCM+ will be used to calibrate β and to provide high-resolution results that can be used in the place of and in addition to experimental results to reduce the uncertainty in the CTF results.« less

Simulating interfering fringe displacements by lateral shifts of a camera for educational purposes

NASA Astrophysics Data System (ADS)

Rivera-Ortega, Uriel

2018-07-01

In this manuscript we propose a simple method to emulate fringe displacements in a fringe pattern, due to the interference of two plane waves, by using lateral shifts of a CMOS detector under the scheme of a Twyman–Green interferometric setup, avoiding unwanted vibrations and the need for specific and expensive devices in order to accomplish the task. The simplicity of the proposed experimental setup allows it to be easily replicated and used for teaching or demonstrative purposes, essentially for undergraduate students.

Multidisciplinary propulsion simulation using the numerical propulsion system simulator (NPSS)

NASA Technical Reports Server (NTRS)

Claus, Russel W.

1994-01-01

Implementing new technology in aerospace propulsion systems is becoming prohibitively expensive. One of the major contributions to the high cost is the need to perform many large scale system tests. The traditional design analysis procedure decomposes the engine into isolated components and focuses attention on each single physical discipline (e.g., fluid for structural dynamics). Consequently, the interactions that naturally occur between components and disciplines can be masked by the limited interactions that occur between individuals or teams doing the design and must be uncovered during expensive engine testing. This overview will discuss a cooperative effort of NASA, industry, and universities to integrate disciplines, components, and high performance computing into a Numerical propulsion System Simulator (NPSS).

Telemedicine using free voice over internet protocol (VoIP) technology.

PubMed

Miller, David J; Miljkovic, Nikola; Chiesa, Chad; Callahan, John B; Webb, Brad; Boedeker, Ben H

2011-01-01

Though dedicated videoteleconference (VTC) systems deliver high quality, low-latency audio and video for telemedical applications, they require expensive hardware and extensive infrastructure. The purpose of this study was to investigate free commercially available Voice over Internet Protocol (VoIP) software as a low cost alternative for telemedicine.

76 FR 52556 - Election To Expense Certain Refineries

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-23

... the manufacture, construction, or production of self-constructed property must begin before January 1... is entered into prior to the manufacture, construction, or production of the property for use by the... refinery be designed to serve the primary purpose of processing liquid fuel from crude oil or qualified...

7 CFR 1280.213 - Investment of funds.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Investment of funds. 1280.213 Section 1280.213... INFORMATION ORDER Lamb Promotion, Research, and Information Order Expenses § 1280.213 Investment of funds. The... the United States. Income from any such investment may be used for any purpose for which the invested...

7 CFR 1280.213 - Investment of funds.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 10 2011-01-01 2011-01-01 false Investment of funds. 1280.213 Section 1280.213... INFORMATION ORDER Lamb Promotion, Research, and Information Order Expenses § 1280.213 Investment of funds. The... the United States. Income from any such investment may be used for any purpose for which the invested...

75 FR 32911 - Preliminary Results of Antidumping Duty Administrative Review: Circular Welded Carbon Steel Pipes...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-10

... for convenience and customs purposes, the written description of the merchandise subject to this order... and unaffiliated customers, net of all movement charges, direct selling expenses, and packing. Where... market prices, less any applicable movement charges, discounts, rebates, and direct and indirect selling...

Feasibility of bridge structural health monitoring using short term data acquisition system.

DOT National Transportation Integrated Search

2015-01-01

Long-term testing of bridges can expensive and result in a large amount of data that is dicult to manage and : analyze. The purpose of this study was to investigate the feasibility of a short-term data acquisition system that : used a minimal numb...

76 FR 58262 - Notice of Proposed Restricted Service List or Section 106 Consultation; Boott Hydropower Inc...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-20

... that, to eliminate unnecessary expense or improve administrative efficiency, the Secretary may... for the proposed license amendment. For purposes of completing the section 106 process, we propose to... Facility Trust, One Tech Drive, Suite 220, Andover, MA 01810. Michael Creasey, Superintendent. National...

11 CFR 9003.5 - Documentation of disbursements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... ELECTION FINANCING ELIGIBILITY FOR PAYMENTS § 9003.5 Documentation of disbursements. (a) Burden of proof. Each candidate shall have the burden of proving that disbursements made by the candidate or his or her... dairy travel expense policy. (iv) If the purpose of the disbursement is not stated in the accompanying...

11 CFR 9033.11 - Documentation of disbursements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... PRIMARY MATCHING FUND ELIGIBILITY FOR PAYMENTS § 9033.11 Documentation of disbursements. (a) Burden of proof. Each candidate shall have the burden of proving that disbursements made by the candidate or his... policy, such as a daily travel expense policy. (iv) If the purpose of the disbursement is not stated in...

20 CFR 404.508 - Defeat the purpose of Title II.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) situations where the person from whom recovery is sought needs substantially all of his current income (including social security monthly benefits) to meet current ordinary and necessary living expenses. [32 FR... necessary needs, or is dependent upon all of his current benefits for such needs. An individual's ordinary...

29 CFR 4.171 - “Bona fide” fringe benefits.

Code of Federal Regulations, 2010 CFR

2010-07-01

... compensation, workers' compensation, or social security, is a fringe benefit for purposes of the Act. (d) The... expenses incident to employment, incentive or suggestion awards, and recruitment bonuses, as well as tools...) Contributions by contractors for such items as social functions or parties for employees, flowers, cards, or...

41 CFR 301-71.1 - What is the purpose of an agency travel accounting system?

Code of Federal Regulations, 2010 CFR

2010-07-01

... an agency travel accounting system? 301-71.1 Section 301-71.1 Public Contracts and Property Management Federal Travel Regulation System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES AGENCY RESPONSIBILITIES 71... accounting system? To: (a) Pay authorized and allowable travel expenses of employees; (b) Provide standard...

2 CFR 200.457 - Plant and security costs.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 2 Grants and Agreements 1 2014-01-01 2014-01-01 false Plant and security costs. 200.457 Section... Cost § 200.457 Plant and security costs. Necessary and reasonable expenses incurred for routine and.... Capital expenditures for plant security purposes are subject to § 200.439 Equipment and other capital...

Project Newgate: Morehead State University and Federal Youth Center Institutional Coordination and Cooperation.

ERIC Educational Resources Information Center

Norfleet, Morris L.

An experimental prison program on a college campus is discussed. The purpose of the project, Project Newgate, is to find innovative ways of helping society's wrongdoers. Problems discussed are: salaries, travel expenses, communications, supplies, personnel training, admission, staff recruitment, and policy formation. (CK)

24 CFR 1000.236 - What are eligible administrative and planning expenses?

Code of Federal Regulations, 2010 CFR

2010-04-01

... administrative management; (2) Coordination monitoring and evaluation; (3) Preparation of the IHP including data collection and transition costs; (4) Preparation of the annual performance report; and (5) Challenge to and collection of data for purposes of challenging the formula. (b) Staff and overhead costs directly related to...

24 CFR 1000.236 - What are eligible administrative and planning expenses?

Code of Federal Regulations, 2011 CFR

2011-04-01

... administrative management; (2) Coordination monitoring and evaluation; (3) Preparation of the IHP including data collection and transition costs; (4) Preparation of the annual performance report; and (5) Challenge to and collection of data for purposes of challenging the formula. (b) Staff and overhead costs directly related to...

26 CFR 1.162-15 - Contributions, dues, etc.

Code of Federal Regulations, 2010 CFR

2010-04-01

... direct relationship to the taxpayer's business and are made with a reasonable expectation of a financial return commensurate with the amount of the donation may constitute allowable deductions as business expenses, provided the donation is not made for a purpose for which a deduction is not allowable by reason...

Symmetrically private information retrieval based on blind quantum computing

NASA Astrophysics Data System (ADS)

Sun, Zhiwei; Yu, Jianping; Wang, Ping; Xu, Lingling

2015-05-01

Universal blind quantum computation (UBQC) is a new secure quantum computing protocol which allows a user Alice who does not have any sophisticated quantum technology to delegate her computing to a server Bob without leaking any privacy. Using the features of UBQC, we propose a protocol to achieve symmetrically private information retrieval, which allows a quantum limited Alice to query an item from Bob with a fully fledged quantum computer; meanwhile, the privacy of both parties is preserved. The security of our protocol is based on the assumption that malicious Alice has no quantum computer, which avoids the impossibility proof of Lo. For the honest Alice, she is almost classical and only requires minimal quantum resources to carry out the proposed protocol. Therefore, she does not need any expensive laboratory which can maintain the coherence of complicated quantum experimental setups.

Coupled Aerodynamic and Structural Sensitivity Analysis of a High-Speed Civil Transport

NASA Technical Reports Server (NTRS)

Mason, B. H.; Walsh, J. L.

2001-01-01

An objective of the High Performance Computing and Communication Program at the NASA Langley Research Center is to demonstrate multidisciplinary shape and sizing optimization of a complete aerospace vehicle configuration by using high-fidelity, finite-element structural analysis and computational fluid dynamics aerodynamic analysis. In a previous study, a multi-disciplinary analysis system for a high-speed civil transport was formulated to integrate a set of existing discipline analysis codes, some of them computationally intensive, This paper is an extension of the previous study, in which the sensitivity analysis for the coupled aerodynamic and structural analysis problem is formulated and implemented. Uncoupled stress sensitivities computed with a constant load vector in a commercial finite element analysis code are compared to coupled aeroelastic sensitivities computed by finite differences. The computational expense of these sensitivity calculation methods is discussed.

Current CFD Practices in Launch Vehicle Applications

NASA Technical Reports Server (NTRS)

Kwak, Dochan; Kiris, Cetin

2012-01-01

The quest for sustained space exploration will require the development of advanced launch vehicles, and efficient and reliable operating systems. Development of launch vehicles via test-fail-fix approach is very expensive and time consuming. For decision making, modeling and simulation (M&S) has played increasingly important roles in many aspects of launch vehicle development. It is therefore essential to develop and maintain most advanced M&S capability. More specifically computational fluid dynamics (CFD) has been providing critical data for developing launch vehicles complementing expensive testing. During the past three decades CFD capability has increased remarkably along with advances in computer hardware and computing technology. However, most of the fundamental CFD capability in launch vehicle applications is derived from the past advances. Specific gaps in the solution procedures are being filled primarily through "piggy backed" efforts.on various projects while solving today's problems. Therefore, some of the advanced capabilities are not readily available for various new tasks, and mission-support problems are often analyzed using ad hoc approaches. The current report is intended to present our view on state-of-the-art (SOA) in CFD and its shortcomings in support of space transport vehicle development. Best practices in solving current issues will be discussed using examples from ascending launch vehicles. Some of the pacing will be discussed in conjunction with these examples.

Gesture Therapy: A Vision-Based System for Arm Rehabilitation after Stroke

NASA Astrophysics Data System (ADS)

Sucar, L. Enrique; Azcárate, Gildardo; Leder, Ron S.; Reinkensmeyer, David; Hernández, Jorge; Sanchez, Israel; Saucedo, Pedro

Each year millions of people in the world survive a stroke, in the U.S. alone the figure is over 600,000 people per year. Movement impairments after stroke are typically treated with intensive, hands-on physical and occupational therapy for several weeks after the initial injury. However, due to economic pressures, stroke patients are receiving less therapy and going home sooner, so the potential benefit of the therapy is not completely realized. Thus, it is important to develop rehabilitation technology that allows individuals who had suffered a stroke to practice intensive movement training without the expense of an always-present therapist. Current solutions are too expensive, as they require a robotic system for rehabilitation. We have developed a low-cost, computer vision system that allows individuals with stroke to practice arm movement exercises at home or at the clinic, with periodic interactions with a therapist. The system integrates a web based virtual environment for facilitating repetitive movement training, with state-of-the art computer vision algorithms that track the hand of a patient and obtain its 3-D coordinates, using two inexpensive cameras and a conventional personal computer. An initial prototype of the system has been evaluated in a pilot clinical study with promising results.

Using Multistate Reweighting to Rapidly and Efficiently Explore Molecular Simulation Parameters Space for Nonbonded Interactions.

PubMed

Paliwal, Himanshu; Shirts, Michael R

2013-11-12

Multistate reweighting methods such as the multistate Bennett acceptance ratio (MBAR) can predict free energies and expectation values of thermodynamic observables at poorly sampled or unsampled thermodynamic states using simulations performed at only a few sampled states combined with single point energy reevaluations of these samples at the unsampled states. In this study, we demonstrate the power of this general reweighting formalism by exploring the effect of simulation parameters controlling Coulomb and Lennard-Jones cutoffs on free energy calculations and other observables. Using multistate reweighting, we can quickly identify, with very high sensitivity, the computationally least expensive nonbonded parameters required to obtain a specified accuracy in observables compared to the answer obtained using an expensive "gold standard" set of parameters. We specifically examine free energy estimates of three molecular transformations in a benchmark molecular set as well as the enthalpy of vaporization of TIP3P. The results demonstrates the power of this multistate reweighting approach for measuring changes in free energy differences or other estimators with respect to simulation or model parameters with very high precision and/or very low computational effort. The results also help to identify which simulation parameters affect free energy calculations and provide guidance to determine which simulation parameters are both appropriate and computationally efficient in general.