Applying Quality Function Deployment Model in Burn Unit Service Improvement.

PubMed

Keshtkaran, Ali; Hashemi, Neda; Kharazmi, Erfan; Abbasi, Mehdi

2016-01-01

Quality function deployment (QFD) is one of the most effective quality design tools. This study applies QFD technique to improve the quality of the burn unit services in Ghotbedin Hospital in Shiraz, Iran. First, the patients' expectations of burn unit services and their priorities were determined through Delphi method. Thereafter, burn unit service specifications were determined through Delphi method. Further, the relationships between the patients' expectations and service specifications and also the relationships between service specifications were determined through an expert group's opinion. Last, the final importance scores of service specifications were calculated through simple additive weighting method. The findings show that burn unit patients have 40 expectations in six different areas. These expectations are in 16 priority levels. Burn units also have 45 service specifications in six different areas. There are four-level relationships between the patients' expectations and service specifications and four-level relationships between service specifications. The most important burn unit service specifications have been identified in this study. The QFD model developed in the study can be a general guideline for QFD planners and executives.

Fuzzy set approach to quality function deployment: An investigation

NASA Technical Reports Server (NTRS)

Masud, Abu S. M.

1992-01-01

The final report of the 1992 NASA/ASEE Summer Faculty Fellowship at the Space Exploration Initiative Office (SEIO) in Langley Research Center is presented. Quality Function Deployment (QFD) is a process, focused on facilitating the integration of the customer's voice in the design and development of a product or service. Various input, in the form of judgements and evaluations, are required during the QFD analyses. All the input variables in these analyses are treated as numeric variables. The purpose of the research was to investigate how QFD analyses can be performed when some or all of the input variables are treated as linguistic variables with values expressed as fuzzy numbers. The reason for this consideration is that human judgement, perception, and cognition are often ambiguous and are better represented as fuzzy numbers. Two approaches for using fuzzy sets in QFD have been proposed. In both cases, all the input variables are considered as linguistic variables with values indicated as linguistic expressions. These expressions are then converted to fuzzy numbers. The difference between the two approaches is due to how the QFD computations are performed with these fuzzy numbers. In Approach 1, the fuzzy numbers are first converted to their equivalent crisp scores and then the QFD computations are performed using these crisp scores. As a result, the output of this approach are crisp numbers, similar to those in traditional QFD. In Approach 2, all the QFD computations are performed with the fuzzy numbers and the output are fuzzy numbers also. Both the approaches have been explained with the help of illustrative examples of QFD application. Approach 2 has also been applied in a QFD application exercise in SEIO, involving a 'mini moon rover' design. The mini moon rover is a proposed tele-operated vehicle that will traverse and perform various tasks, including autonomous operations, on the moon surface. The output of the moon rover application exercise is a

An Integrated model for Product Quality Development—A case study on Quality functions deployment and AHP based approach

NASA Astrophysics Data System (ADS)

Maitra, Subrata; Banerjee, Debamalya

2010-10-01

Present article is based on application of the product quality and improvement of design related with the nature of failure of machineries and plant operational problems of an industrial blower fan Company. The project aims at developing the product on the basis of standardized production parameters for selling its products in the market. Special attention is also being paid to the blower fans which have been ordered directly by the customer on the basis of installed capacity of air to be provided by the fan. Application of quality function deployment is primarily a customer oriented approach. Proposed model of QFD integrated with AHP to select and rank the decision criterions on the commercial and technical factors and the measurement of the decision parameters for selection of best product in the compettitive environment. The present AHP-QFD model justifies the selection of a blower fan with the help of the group of experts' opinion by pairwise comparison of the customer's and ergonomy based technical design requirements. The steps invoved in implementation of the QFD—AHP and selection of weighted criterion may be helpful for all similar purpose industries maintaining cost and utility for competitive product.

[A development and evaluation of nursing KMS using QFD in outpatient departments].

PubMed

Lee, Han Na; Yun, Eun Kyoung

2014-02-01

This study was done to develop and implement the Nursing KMS (knowledge management system) in order to improve knowledge sharing and creation among clinical nurses in outpatient departments. This study was a methodological research using the 'System Development Life Cycle': consisting of planning, analyzing, design, implementation, and evaluation. Quality Function Deployment (QFD) was applied to establish nurse requirements and to identify important design requirements. Participants were 32 nurses and for evaluation data were collected pre and post intervention at K Hospital in Seoul, a tertiary hospital with over 1,000 beds. The Nursing KMS was built using a Linux-based operating system, Oracle DBMS, and Java 1.6 web programming tools. The system was implemented as a sub-system of the hospital information system. There was statistically significant differences in the sharing of knowledge but creating of knowledge was no statistically meaningful difference observed. In terms of satisfaction with the system, system efficiency ranked first followed by system convenience, information suitability and information usefulness. The results indicate that the use of Nursing KMS increases nurses' knowledge sharing and can contribute to increased quality of nursing knowledge and provide more opportunities for nurses to gain expertise from knowledge shared among nurses.

An analytical approach to customer requirement information processing

NASA Astrophysics Data System (ADS)

Zhou, Zude; Xiao, Zheng; Liu, Quan; Ai, Qingsong

2013-11-01

'Customer requirements' (CRs) management is a key component of customer relationship management (CRM). By processing customer-focused information, CRs management plays an important role in enterprise systems (ESs). Although two main CRs analysis methods, quality function deployment (QFD) and Kano model, have been applied to many fields by many enterprises in the past several decades, the limitations such as complex processes and operations make them unsuitable for online businesses among small- and medium-sized enterprises (SMEs). Currently, most SMEs do not have the resources to implement QFD or Kano model. In this article, we propose a method named customer requirement information (CRI), which provides a simpler and easier way for SMEs to run CRs analysis. The proposed method analyses CRs from the perspective of information and applies mathematical methods to the analysis process. A detailed description of CRI's acquisition, classification and processing is provided.

A method for determining customer requirement weights based on TFMF and TLR

NASA Astrophysics Data System (ADS)

Ai, Qingsong; Shu, Ting; Liu, Quan; Zhou, Zude; Xiao, Zheng

2013-11-01

'Customer requirements' (CRs) management plays an important role in enterprise systems (ESs) by processing customer-focused information. Quality function deployment (QFD) is one of the main CRs analysis methods. Because CR weights are crucial for the input of QFD, we developed a method for determining CR weights based on trapezoidal fuzzy membership function (TFMF) and 2-tuple linguistic representation (TLR). To improve the accuracy of CR weights, we propose to apply TFMF to describe CR weights so that they can be appropriately represented. Because the fuzzy logic is not capable of aggregating information without loss, TLR model is adopted as well. We first describe the basic concepts of TFMF and TLR and then introduce an approach to compute CR weights. Finally, an example is provided to explain and verify the proposed method.

Combined quality function deployment and logical framework analysis to improve quality of emergency care in Malta.

PubMed

Buttigieg, Sandra Catherine; Dey, Prasanta Kumar; Cassar, Mary Rose

2016-01-01

The purpose of this paper is to develop an integrated patient-focused analytical framework to improve quality of care in accident and emergency (A & E) unit of a Maltese hospital. The study adopts a case study approach. First, a thorough literature review has been undertaken to study the various methods of healthcare quality management. Second, a healthcare quality management framework is developed using combined quality function deployment (QFD) and logical framework approach (LFA). Third, the proposed framework is applied to a Maltese hospital to demonstrate its effectiveness. The proposed framework has six steps, commencing with identifying patients' requirements and concluding with implementing improvement projects. All the steps have been undertaken with the involvement of the concerned stakeholders in the A & E unit of the hospital. The major and related problems being faced by the hospital under study were overcrowding at A & E and shortage of beds, respectively. The combined framework ensures better A & E services and patient flow. QFD identifies and analyses the issues and challenges of A & E and LFA helps develop project plans for healthcare quality improvement. The important outcomes of implementing the proposed quality improvement programme are fewer hospital admissions, faster patient flow, expert triage and shorter waiting times at the A & E unit. Increased emergency consultant cover and faster first significant medical encounter were required to start addressing the problems effectively. Overall, the combined QFD and LFA method is effective to address quality of care in A & E unit. PRACTICAL/IMPLICATIONS: The proposed framework can be easily integrated within any healthcare unit, as well as within entire healthcare systems, due to its flexible and user-friendly approach. It could be part of Six Sigma and other quality initiatives. Although QFD has been extensively deployed in healthcare setup to improve quality of care, very little has been

Proposed biokinetic model for phosphorus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leggett, Richard Wayne

2014-06-04

This paper reviews data related to the biokinetics of phosphorus in the human body and proposes a biokinetic model for systemic phosphorus for use in updated International Commission on Radiological Protection (ICRP) guidance on occupational intake of radionuclides. Compared with the ICRP s current occupational model for phosphorus (Publication 68, 1994) the proposed model provides a more realistic description of the paths of movement of phosphorus in the body and improved consistency with experimental, medical, and environmental data on the time-dependent distribution and retention of phosphorus following uptake to blood. For acute uptake of 32P to blood, the proposed modelmore » yields roughly a 50% decrease in dose estimates for bone surface and red marrow and a 6-fold increase in estimates for liver and kidney compared with the biokinetic model of Publication 68 (applying Publication 68 dosimetric models in both sets of calculations). For acute uptake of 33P to blood, the proposed model yields roughly a 50% increase in dose estimates for bone surface and red marrow and a 7-fold increase in estimates for liver and kidney compared with the model of Publication 68.« less

Research on Computer Aided Innovation Model of Weapon Equipment Requirement Demonstration

NASA Astrophysics Data System (ADS)

Li, Yong; Guo, Qisheng; Wang, Rui; Li, Liang

Firstly, in order to overcome the shortcoming of using only AD or TRIZ solely, and solve the problems currently existed in weapon equipment requirement demonstration, the paper construct the method system of weapon equipment requirement demonstration combining QFD, AD, TRIZ, FA. Then, we construct a CAI model frame of weapon equipment requirement demonstration, which include requirement decomposed model, requirement mapping model and requirement plan optimization model. Finally, we construct the computer aided innovation model of weapon equipment requirement demonstration, and developed CAI software of equipment requirement demonstration.

An integrated quality function deployment and capital budgeting methodology for occupational safety and health as a systems thinking approach: the case of the construction industry.

PubMed

Bas, Esra

2014-07-01

In this paper, an integrated methodology for Quality Function Deployment (QFD) and a 0-1 knapsack model is proposed for occupational safety and health as a systems thinking approach. The House of Quality (HoQ) in QFD methodology is a systematic tool to consider the inter-relationships between two factors. In this paper, three HoQs are used to consider the interrelationships between tasks and hazards, hazards and events, and events and preventive/protective measures. The final priority weights of events are defined by considering their project-specific preliminary weights, probability of occurrence, and effects on the victim and the company. The priority weights of the preventive/protective measures obtained in the last HoQ are fed into a 0-1 knapsack model for the investment decision. Then, the selected preventive/protective measures can be adapted to the task design. The proposed step-by-step methodology can be applied to any stage of a project to design the workplace for occupational safety and health, and continuous improvement for safety is endorsed by the closed loop characteristic of the integrated methodology. Copyright © 2013 Elsevier Ltd. All rights reserved.

A Product Development Decision Model for Cockpit Weather Information System

NASA Technical Reports Server (NTRS)

Sireli, Yesim; Kauffmann, Paul; Gupta, Surabhi; Kachroo, Pushkin; Johnson, Edward J., Jr. (Technical Monitor)

2003-01-01

There is a significant market demand for advanced cockpit weather information products. However, it is unclear how to identify the most promising technological options that provide the desired mix of consumer requirements by employing feasible technical systems at a price that achieves market success. This study develops a unique product development decision model that employs Quality Function Deployment (QFD) and Kano's model of consumer choice. This model is specifically designed for exploration and resolution of this and similar information technology related product development problems.

A Product Development Decision Model for Cockpit Weather Information Systems

NASA Technical Reports Server (NTRS)

Sireli, Yesim; Kauffmann, Paul; Gupta, Surabhi; Kachroo, Pushkin

2003-01-01

There is a significant market demand for advanced cockpit weather information products. However, it is unclear how to identify the most promising technological options that provide the desired mix of consumer requirements by employing feasible technical systems at a price that achieves market success. This study develops a unique product development decision model that employs Quality Function Deployment (QFD) and Kano's model of consumer choice. This model is specifically designed for exploration and resolution of this and similar information technology related product development problems.

Integrating Kano’s Model into Quality Function Deployment for Product Design: A Comprehensive Review

NASA Astrophysics Data System (ADS)

Ginting, Rosnani; Hidayati, Juliza; Siregar, Ikhsan

2018-03-01

Many methods and techniques are adopted by some companies to improve the competitiveness through the fulfillment of customer satisfaction by enhancement and improvement the product design quality. Over the past few years, several researcher have studied extensively combining Quality Function Deployment and Kano’s model as design techniques by focusing on translating consumer desires into a product design. This paper presents a review and analysis of several literatures that associated to the integration methodology of Kano into the QFD process. Various of international journal articles were selected, collected and analyzed through a number of relevant scientific publications. In-depth analysis was performed, and focused in this paper on the results, advantages and drawbacks of its methodology. In addition, this paper also provides the analysis that acquired in this study related to the development of the methodology. It is hopedd this paper can be a reference for other researchers and manufacturing companies to implement the integration method of QFD- Kano for product design.

Proposed Reliability/Cost Model

NASA Technical Reports Server (NTRS)

Delionback, L. M.

1982-01-01

New technique estimates cost of improvement in reliability for complex system. Model format/approach is dependent upon use of subsystem cost-estimating relationships (CER's) in devising cost-effective policy. Proposed methodology should have application in broad range of engineering management decisions.

Design Of Measurements For Evaluating Readiness Of Technoware Components To Meet The Required Standard Of Products

NASA Astrophysics Data System (ADS)

Fauzi, Ilham; Muharram Hasby, Fariz; Irianto, Dradjad

2018-03-01

Although government is able to make mandatory standards that must be obeyed by the industry, the respective industries themselves often have difficulties to fulfil the requirements described in those standards. This is especially true in many small and medium sized enterprises that lack the required capital to invest in standard-compliant equipment and machineries. This study aims to develop a set of measurement tools for evaluating the level of readiness of production technology with respect to the requirements of a product standard based on the quality function deployment (QFD) method. By combining the QFD methodology, UNESCAP Technometric model [9] and Analytic Hierarchy Process (AHP), this model is used to measure a firm’s capability to fulfill government standard in the toy making industry. Expert opinions from both the governmental officers responsible for setting and implementing standards and the industry practitioners responsible for managing manufacturing processes are collected and processed to find out the technological capabilities that should be improved by the firm to fulfill the existing standard. This study showed that the proposed model can be used successfully to measure the gap between the requirements of the standard and the readiness of technoware technological component in a particular firm.

Attributing uncertainty in streamflow simulations due to variable inputs via the Quantile Flow Deviation metric

NASA Astrophysics Data System (ADS)

Shoaib, Syed Abu; Marshall, Lucy; Sharma, Ashish

2018-06-01

Every model to characterise a real world process is affected by uncertainty. Selecting a suitable model is a vital aspect of engineering planning and design. Observation or input errors make the prediction of modelled responses more uncertain. By way of a recently developed attribution metric, this study is aimed at developing a method for analysing variability in model inputs together with model structure variability to quantify their relative contributions in typical hydrological modelling applications. The Quantile Flow Deviation (QFD) metric is used to assess these alternate sources of uncertainty. The Australian Water Availability Project (AWAP) precipitation data for four different Australian catchments is used to analyse the impact of spatial rainfall variability on simulated streamflow variability via the QFD. The QFD metric attributes the variability in flow ensembles to uncertainty associated with the selection of a model structure and input time series. For the case study catchments, the relative contribution of input uncertainty due to rainfall is higher than that due to potential evapotranspiration, and overall input uncertainty is significant compared to model structure and parameter uncertainty. Overall, this study investigates the propagation of input uncertainty in a daily streamflow modelling scenario and demonstrates how input errors manifest across different streamflow magnitudes.

Toward inflation models compatible with the no-boundary proposal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hwang, Dong-il; Yeom, Dong-han, E-mail: dongil.j.hwang@gmail.com, E-mail: innocent.yeom@gmail.com

2014-06-01

In this paper, we investigate various inflation models in the context of the no-boundary proposal. We propose that a good inflation model should satisfy three conditions: observational constraints, plausible initial conditions, and naturalness of the model. For various inflation models, we assign the probability to each initial condition using the no-boundary proposal and define a quantitative standard, typicality, to check whether the model satisfies the observational constraints with probable initial conditions. There are three possible ways to satisfy the typicality criterion: there was pre-inflation near the high energy scale, the potential is finely tuned or the inflationary field space ismore » unbounded, or there are sufficient number of fields that contribute to inflation. The no-boundary proposal rejects some of naive inflation models, explains some of traditional doubts on inflation, and possibly, can have observational consequences.« less

An NPSS Model of a Proposed Altitude Test Facility

DTIC Science & Technology

2011-02-01

An NPSS Model of a Proposed Altitude Test Facility by Brian C. Huffman, Thomas M. Lavelle, and Albert K. Owen ARL-RP-310 February 2011...originator. Army Research Laboratory Aberdeen Proving Ground, MD 21005-5066 ARL-RP-310 February 2011 An NPSS Model of a Proposed...January 2011 4. TITLE AND SUBTITLE An NPSS Model of a Proposed Altitude Test Facility 5a. CONTRACT NUMBER DAAB07-03-D-2389 5b. GRANT NUMBER 5c

Quality Function Deployment for Large Systems

NASA Technical Reports Server (NTRS)

Dean, Edwin B.

1992-01-01

Quality Function Deployment (QFD) is typically applied to small subsystems. This paper describes efforts to extend QFD to large scale systems. It links QFD to the system engineering process, the concurrent engineering process, the robust design process, and the costing process. The effect is to generate a tightly linked project management process of high dimensionality which flushes out issues early to provide a high quality, low cost, and, hence, competitive product. A pre-QFD matrix linking customers to customer desires is described.

Proposed reliability cost model

NASA Technical Reports Server (NTRS)

Delionback, L. M.

1973-01-01

The research investigations which were involved in the study include: cost analysis/allocation, reliability and product assurance, forecasting methodology, systems analysis, and model-building. This is a classic example of an interdisciplinary problem, since the model-building requirements include the need for understanding and communication between technical disciplines on one hand, and the financial/accounting skill categories on the other. The systems approach is utilized within this context to establish a clearer and more objective relationship between reliability assurance and the subcategories (or subelements) that provide, or reenforce, the reliability assurance for a system. Subcategories are further subdivided as illustrated by a tree diagram. The reliability assurance elements can be seen to be potential alternative strategies, or approaches, depending on the specific goals/objectives of the trade studies. The scope was limited to the establishment of a proposed reliability cost-model format. The model format/approach is dependent upon the use of a series of subsystem-oriented CER's and sometimes possible CTR's, in devising a suitable cost-effective policy.

An integrated new product development framework - an application on green and low-carbon products

NASA Astrophysics Data System (ADS)

Lin, Chun-Yu; Lee, Amy H. I.; Kang, He-Yau

2015-03-01

Companies need to be innovative to survive in today's competitive market; thus, new product development (NPD) has become very important. This research constructs an integrated NPD framework for developing new products. In stage one, customer attributes (CAs) and engineering characteristics (ECs) for developing products are collected, and fuzzy interpretive structural modelling (FISM) is applied to understand the relationships among these critical factors. Based on quality function deployment (QFD), a house of quality is then built, and fuzzy analytic network process (FANP) is adopted to calculate the relative importance of ECs. In stage two, fuzzy failure mode and effects analysis (FFMEA) is applied to understand the potential failures of the ECs and to determine the importance of ECs with respect to risk control. In stage three, a goal programming (GP) model is constructed to consider the outcome from the FANP-QFD, FFMEA and other objectives, in order to select the most important ECs. Due to pollution and global warming, environmental protection has become an important topic. With both governments and consumers developing environmental consciousness, successful green and low-carbon NPD provides an important competitive advantage, enabling the survival or renewal of firms. The proposed framework is implemented in a panel manufacturing firm for designing a green and low-carbon product.

A Systematic Approach for Quantitative Analysis of Multidisciplinary Design Optimization Framework

NASA Astrophysics Data System (ADS)

Kim, Sangho; Park, Jungkeun; Lee, Jeong-Oog; Lee, Jae-Woo

An efficient Multidisciplinary Design and Optimization (MDO) framework for an aerospace engineering system should use and integrate distributed resources such as various analysis codes, optimization codes, Computer Aided Design (CAD) tools, Data Base Management Systems (DBMS), etc. in a heterogeneous environment, and need to provide user-friendly graphical user interfaces. In this paper, we propose a systematic approach for determining a reference MDO framework and for evaluating MDO frameworks. The proposed approach incorporates two well-known methods, Analytic Hierarchy Process (AHP) and Quality Function Deployment (QFD), in order to provide a quantitative analysis of the qualitative criteria of MDO frameworks. Identification and hierarchy of the framework requirements and the corresponding solutions for the reference MDO frameworks, the general one and the aircraft oriented one were carefully investigated. The reference frameworks were also quantitatively identified using AHP and QFD. An assessment of three in-house frameworks was then performed. The results produced clear and useful guidelines for improvement of the in-house MDO frameworks and showed the feasibility of the proposed approach for evaluating an MDO framework without a human interference.

A proposed model for economic evaluations of major depressive disorder.

PubMed

Haji Ali Afzali, Hossein; Karnon, Jonathan; Gray, Jodi

2012-08-01

In countries like UK and Australia, the comparability of model-based analyses is an essential aspect of reimbursement decisions for new pharmaceuticals, medical services and technologies. Within disease areas, the use of models with alternative structures, type of modelling techniques and/or data sources for common parameters reduces the comparability of evaluations of alternative technologies for the same condition. The aim of this paper is to propose a decision analytic model to evaluate long-term costs and benefits of alternative management options in patients with depression. The structure of the proposed model is based on the natural history of depression and includes clinical events that are important from both clinical and economic perspectives. Considering its greater flexibility with respect to handling time, discrete event simulation (DES) is an appropriate simulation platform for modelling studies of depression. We argue that the proposed model can be used as a reference model in model-based studies of depression improving the quality and comparability of studies.

Proposal for constructing an advanced software tool for planetary atmospheric modeling

NASA Technical Reports Server (NTRS)

Keller, Richard M.; Sims, Michael H.; Podolak, Esther; Mckay, Christopher P.; Thompson, David E.

1990-01-01

Scientific model building can be a time intensive and painstaking process, often involving the development of large and complex computer programs. Despite the effort involved, scientific models cannot easily be distributed and shared with other scientists. In general, implemented scientific models are complex, idiosyncratic, and difficult for anyone but the original scientist/programmer to understand. We believe that advanced software techniques can facilitate both the model building and model sharing process. We propose to construct a scientific modeling software tool that serves as an aid to the scientist in developing and using models. The proposed tool will include an interactive intelligent graphical interface and a high level, domain specific, modeling language. As a testbed for this research, we propose development of a software prototype in the domain of planetary atmospheric modeling.

Robust visual tracking via multiple discriminative models with object proposals

NASA Astrophysics Data System (ADS)

Zhang, Yuanqiang; Bi, Duyan; Zha, Yufei; Li, Huanyu; Ku, Tao; Wu, Min; Ding, Wenshan; Fan, Zunlin

2018-04-01

Model drift is an important reason for tracking failure. In this paper, multiple discriminative models with object proposals are used to improve the model discrimination for relieving this problem. Firstly, the target location and scale changing are captured by lots of high-quality object proposals, which are represented by deep convolutional features for target semantics. And then, through sharing a feature map obtained by a pre-trained network, ROI pooling is exploited to wrap the various sizes of object proposals into vectors of the same length, which are used to learn a discriminative model conveniently. Lastly, these historical snapshot vectors are trained by different lifetime models. Based on entropy decision mechanism, the bad model owing to model drift can be corrected by selecting the best discriminative model. This would improve the robustness of the tracker significantly. We extensively evaluate our tracker on two popular benchmarks, the OTB 2013 benchmark and UAV20L benchmark. On both benchmarks, our tracker achieves the best performance on precision and success rate compared with the state-of-the-art trackers.

Customer-experienced rapid prototyping

NASA Astrophysics Data System (ADS)

Zhang, Lijuan; Zhang, Fu; Li, Anbo

2008-12-01

In order to describe accurately and comprehend quickly the perfect GIS requirements, this article will integrate the ideas of QFD (Quality Function Deployment) and UML (Unified Modeling Language), and analyze the deficiency of prototype development model, and will propose the idea of the Customer-Experienced Rapid Prototyping (CE-RP) and describe in detail the process and framework of the CE-RP, from the angle of the characteristics of Modern-GIS. The CE-RP is mainly composed of Customer Tool-Sets (CTS), Developer Tool-Sets (DTS) and Barrier-Free Semantic Interpreter (BF-SI) and performed by two roles of customer and developer. The main purpose of the CE-RP is to produce the unified and authorized requirements data models between customer and software developer.

A Proposal of TLS Implementation for Cross Certification Model

NASA Astrophysics Data System (ADS)

Kaji, Tadashi; Fujishiro, Takahiro; Tezuka, Satoru

Today, TLS is widely used for achieving a secure communication system. And TLS is used PKI for server authentication and/or client authentication. However, its PKI environment, which is called as “multiple trust anchors environment,” causes the problem that the verifier has to maintain huge number of CA certificates in the ubiquitous network because the increase of terminals connected to the network brings the increase of CAs. However, most of terminals in the ubiquitous network will not have enough memory to hold such huge number of CA certificates. Therefore, another PKI environment, “cross certification environment”, is useful for the ubiquitous network. But, because current TLS is designed for the multiple trust anchors model, TLS cannot work efficiently on the cross-certification model. This paper proposes a TLS implementation method to support the cross certification model efficiently. Our proposal reduces the size of exchanged messages between the TLS client and the TLS server during the handshake process. Therefore, our proposal is suitable for implementing TLS in the terminals that do not have enough computing power and memory in ubiquitous network.

A Proposed Systems Model for Socializing the Graduate Writer

ERIC Educational Resources Information Center

Jones, David R.

2018-01-01

Although researchers chorus the need to support graduate students toward higher levels of writing proficiency, their findings lack a holistic model for doing so. A model emerges upon scrutiny of the factors that have been implicated in supporting writing proficiency. In the proposed model, a socialization theory fits as a proximal process into the…

Quantifying complexity in translational research: an integrated approach.

PubMed

Munoz, David A; Nembhard, Harriet Black; Kraschnewski, Jennifer L

2014-01-01

The purpose of this paper is to quantify complexity in translational research. The impact of major operational steps and technical requirements is calculated with respect to their ability to accelerate moving new discoveries into clinical practice. A three-phase integrated quality function deployment (QFD) and analytic hierarchy process (AHP) method was used to quantify complexity in translational research. A case study in obesity was used to usability. Generally, the evidence generated was valuable for understanding various components in translational research. Particularly, the authors found that collaboration networks, multidisciplinary team capacity and community engagement are crucial for translating new discoveries into practice. As the method is mainly based on subjective opinion, some argue that the results may be biased. However, a consistency ratio is calculated and used as a guide to subjectivity. Alternatively, a larger sample may be incorporated to reduce bias. The integrated QFD-AHP framework provides evidence that could be helpful to generate agreement, develop guidelines, allocate resources wisely, identify benchmarks and enhance collaboration among similar projects. Current conceptual models in translational research provide little or no clue to assess complexity. The proposed method aimed to fill this gap. Additionally, the literature review includes various features that have not been explored in translational research.

Quantifying complexity in translational research: an integrated approach

PubMed Central

Munoz, David A.; Nembhard, Harriet Black; Kraschnewski, Jennifer L.

2014-01-01

Purpose This article quantifies complexity in translational research. The impact of major operational steps and technical requirements (TR) is calculated with respect to their ability to accelerate moving new discoveries into clinical practice. Design/Methodology/Approach A three-phase integrated Quality Function Deployment (QFD) and Analytic Hierarchy Process (AHP) method was used to quantify complexity in translational research. A case study in obesity was used to usability. Findings Generally, the evidence generated was valuable for understanding various components in translational research. Particularly, we found that collaboration networks, multidisciplinary team capacity and community engagement are crucial for translating new discoveries into practice. Research limitations/implications As the method is mainly based on subjective opinion, some argue that the results may be biased. However, a consistency ratio is calculated and used as a guide to subjectivity. Alternatively, a larger sample may be incorporated to reduce bias. Practical implications The integrated QFD-AHP framework provides evidence that could be helpful to generate agreement, develop guidelines, allocate resources wisely, identify benchmarks and enhance collaboration among similar projects. Originality/value Current conceptual models in translational research provide little or no clue to assess complexity. The proposed method aimed to fill this gap. Additionally, the literature review includes various features that have not been explored in translational research. PMID:25417380

Application of quality function deployment in defense technology development

NASA Astrophysics Data System (ADS)

Cornejo, Estrella De Maria Forster

1998-12-01

Introduction. As advances in aviation technology take place, the research community recognizes, and the operator demands that the progress in technology be integrated with the human component of the same, the aircrew. Integrative programs are primarily concerned with three sub-systems: the operator, the aircraft, and the cockpit. To accomplish their integration, a "dialogue" between the various disciplines addressing these aspects of the weapon system is indispensable. Such dialogue is theorized to be possible via Quality Function Deployment (QFD). QFD emphasizes an understanding of the relationships between the requirements of the aircrew and the technology the research and engineering community provides. In establishing these relationships, program management concerns such as need, applicability, affordability, and transition of the technology are addressed. Procedures. QFD was incorporated in a Performance Methodology (PMM). This methodology associates a particular technology's Measures of Performance (MOP) and the overall weapon system's Measures of Effectiveness (MOE) to which it is applied. Incorporation of QFD in the PMM was hypothesized to result in an improved PMM (Q-PMM) that would address both, the aircrew's interests and those of program management. Both methodologies were performed. The g-ensemble was selected as the technology of interest. The Standard and Combat Edge designs were examined for comparison purposes. Technology MOPs were ranked in order of importance in accordance to both the PMM and its proposed improvement, the Q-PMM. These methodologies were then evaluated by way of an experiment in the human centrifuge. This experiment was to answer two questions: Is there a relationship between the technology's MOP and the aircraft's MOEs? Given a MOP-MOE relationship, is there a difference between the two ensembles? Findings. The Q-PMM was superior to the PMM in addressing customer's requirements. The Q-PMM was superior to the PMM in addressing

Listening to the Customer: Implementing Quality Function Deployment.

ERIC Educational Resources Information Center

Schauerman, Sam; And Others

1994-01-01

Describes Yoji Akao's concept of quality function development (QFD), a strategic tool that translates the customers' quality requirements into organizational language. Examines how El Camino College's (California) application of QFD matches constituent needs to college functions. Includes an 11-item bibliography and lists El Camino College's…

Evaluation of models proposed for the 1991 revision of the International Geomagnetic Reference Field

USGS Publications Warehouse

Peddie, N.W.

1992-01-01

The 1991 revision of the International Geomagnetic Reference Field (IGRF) comprises a definitive main-field model for 1985.0, a main-field model for 1990.0, and a forecast secular-variation model for the period 1990-1995. The five 1985.0 main-field models and five 1990.0 main-field models that were proposed have been evaluated by comparing them with one another, with magnetic observatory data, and with Project MAGNET aerial survey data. The comparisons indicate that the main-field models proposed by IZMIRAN, and the secular-variation model proposed jointly by the British Geological Survey and the US Naval Oceanographic Office, should be assigned relatively lower weight in the derivation of the new IGRF models. -Author

A Descriptive Guide to Trade Space Analysis

DTIC Science & Technology

2015-09-01

Development QFD Quality Function Deployment RSM Response Surface Method RSE Response Surface Equation SE Systems Engineering SME Subject Matter...surface equations ( RSEs ) as surrogate models. It uses the RSEs with Monte Carlo simulation to quantitatively explore changes across the surfaces to

Linear regression crash prediction models : issues and proposed solutions.

DOT National Transportation Integrated Search

2010-05-01

The paper develops a linear regression model approach that can be applied to : crash data to predict vehicle crashes. The proposed approach involves novice data aggregation : to satisfy linear regression assumptions; namely error structure normality ...

A Proposed Model of Jazz Theory Knowledge Acquisition

ERIC Educational Resources Information Center

Ciorba, Charles R.; Russell, Brian E.

2014-01-01

The purpose of this study was to test a hypothesized model that proposes a causal relationship between motivation and academic achievement on the acquisition of jazz theory knowledge. A reliability analysis of the latent variables ranged from 0.92 to 0.94. Confirmatory factor analyses of the motivation (standardized root mean square residual…

Improving the Interoperability of Disaster Models: a Case Study of Proposing Fireml for Forest Fire Model

NASA Astrophysics Data System (ADS)

Jiang, W.; Wang, F.; Meng, Q.; Li, Z.; Liu, B.; Zheng, X.

2018-04-01

This paper presents a new standardized data format named Fire Markup Language (FireML), extended by the Geography Markup Language (GML) of OGC, to elaborate upon the fire hazard model. The proposed FireML is able to standardize the input and output documents of a fire model for effectively communicating with different disaster management systems to ensure a good interoperability. To demonstrate the usage of FireML and testify its feasibility, an adopted forest fire spread model being compatible with FireML is described. And a 3DGIS disaster management system is developed to simulate the dynamic procedure of forest fire spread with the defined FireML documents. The proposed approach will enlighten ones who work on other disaster models' standardization work.

Assessment of models proposed for the 1981 revision of the IGRF.

USGS Publications Warehouse

Peddie, N.W.; Fabiano, E.B.

1982-01-01

For the second revision of the International Geomagnetic Reference Field (IGRF), the US National Aeronautics and Space Administration (NASA), the UK Institute of Geological Sciences (IGS), and the US Geological Survey (USGS) submitted proposed models of the Earth's main magnetic field at 1965.0, 1970.0, 1975.0, and 1980.0, and its secular variation during 1980-1985. We assessed the proposed models by comparing them with annual mean values from worldwide magnetic observatories data for 1978-1980 from 63 US magnetic repeat stations, and rates-of-change values for worldwide magnetic observatories for 1965-1985 that were derived from straight lines fitted to annual means for 5-yr intervals. We also mutually compared the 1980 models.-from Authors

Assessment of models proposed for the 1985 revision of the international geomagnetic reference field

USGS Publications Warehouse

Peddie, N.W.; Zunde, A.K.

1987-01-01

Geomagnetic measurements from land, marine and aerial surveys conducted in the years 1945-1964 were used to test the 14 models proposed as additions, for that period, to the series of definitive geomagnetic reference field (DGRF) models. Overall, NASA's 'SFAS' models and the BGS (British Geological Survey) models agree best with these data. Comparisons of the two proposed definitive main-field models for 1980.0, with each other and with the existing IGRF 1980 main-field model, show mostly close agreement, with the greatest absolute differences (several tens of nanotesla) occurring in the region of Antarctica. Comparison of the the three proposed forecast secular-variation models for 1985-1990 with estimates of recent rates of change at 148 magnetic observatories shows that the IZMIRAN (U.S.S.R.) and USGS models are in closest agreement with these data. ?? 1987.

[Impact of small-area context on health: proposing a conceptual model].

PubMed

Voigtländer, S; Mielck, A; Razum, O

2012-11-01

Recent empirical studies stress the impact of features related to the small-area context on individual health. However, so far there exists no standard explanatory model that integrates the different kinds of such features and that conceptualises their relation to individual characteristics of social inequality. A review of theoretical publications on the relationship between social position and health as well as existing conceptual models for the impact of features related to the small-area context on health was undertaken. In the present article we propose a conceptual model for the health impact of the small-area context. This model conceptualises the location of residence as one dimension of social inequality that affects health through the resources as well as stressors which are inherent in the small-area context. The proposed conceptual model offers an orientation for future empirical studies and can serve as a basis for further discussions concerning the health relevance of the small-area context. © Georg Thieme Verlag KG Stuttgart · New York.

Non-linear assessment and deficiency of linear relationship for healthcare industry

NASA Astrophysics Data System (ADS)

Nordin, N.; Abdullah, M. M. A. B.; Razak, R. C.

2017-09-01

This paper presents the development of the non-linear service satisfaction model that assumes patients are not necessarily satisfied or dissatisfied with good or poor service delivery. With that, compliment and compliant assessment is considered, simultaneously. Non-linear service satisfaction instrument called Kano-Q and Kano-SS is developed based on Kano model and Theory of Quality Attributes (TQA) to define the unexpected, hidden and unspoken patient satisfaction and dissatisfaction into service quality attribute. A new Kano-Q and Kano-SS algorithm for quality attribute assessment is developed based satisfaction impact theories and found instrumentally fit the reliability and validity test. The results were also validated based on standard Kano model procedure before Kano model and Quality Function Deployment (QFD) is integrated for patient attribute and service attribute prioritization. An algorithm of Kano-QFD matrix operation is developed to compose the prioritized complaint and compliment indexes. Finally, the results of prioritized service attributes are mapped to service delivery category to determine the most prioritized service delivery that need to be improved at the first place by healthcare service provider.

Physician outcome measurement: review and proposed model.

PubMed

Siha, S

1998-01-01

As health care moves from a free-for-service environment to a capitated arena, outcome measurements must change. ABC Children's Medical Center is challenged with developing comprehensive outcome measures for an employed physician group. An extensive literature review validates that physician outcomes must move beyond revenue production and measure all aspects of care delivery. The proposed measurement model for this physician group is a trilogy model. It includes measures of cost, quality, and service. While these measures can be examined separately, it is imperative to understand their integration in determining an organization's competitive advantage. The recommended measurements for the physician group must be consistent with the overall organizational goals. The long-term impact will be better utilization of resources. This will result in the most cost effective, quality care for the health care consumer.

The development of an integrated Indonesian health care model using Kano's model, quality function deployment and balanced scorecard

NASA Astrophysics Data System (ADS)

Jonny, Zagloed, Teuku Yuri M.

2017-11-01

This paper aims to present an integrated health care model for Indonesian health care industry. Based on previous researches, there are two health care models in the industry such as decease- and patient-centered care models. In their developments, the patient-centered care model is widely applied due to its capability in reducing cost and improving quality simultaneously. However, there is still no comprehensive model resulting in cost reduction, quality improvement, patient satisfaction and hospital profitability simultaneously. Therefore, this research is intended to develop that model. In doing so, first, a conceptual model using Kano's Model, Quality Function Deployment (QFD) and Balanced Scorecard (BSC) is developed to generate several important elements of the model as required by stakeholders. Then, a case study of an Indonesian hospital is presented to evaluate the validity of the model using correlation analysis. As a result, it can be concluded that the model is validated implying several managerial insights among its elements such as l) leadership (r=0.85) and context of the organization (r=0.77) improve operations; 2) planning (r=0.96), support process (r=0.87) and continual improvement (r=0.95) also improve operations; 3) operations improve customer satisfaction (r=0.89) and financial performance (r=0.93) and 4) customer satisfaction improves the financial performance (0.98).

Eco-design of low energy mechanical milling through implementation of quality function deployment and design for sustainability

NASA Astrophysics Data System (ADS)

Rashid, Muhammad Hanif Abd; Nor, Nik Hisyamudin Muhd; Selamat, Siti Norhana; Hassan, Mohd Fahrul; Rahim, Abd Khalil Abd; Ahmad, Mohd Fauzi; Ismail, Al Emran; Omar, Badrul; Mokhtar, Mohd Faiz; Turan, Faiz Mohd; Yokoyama, Seiji

2017-04-01

Malaysia as a developing country favor energy demand by years which created mainly from fossil fuel. Unfortunately, the action leads to significant increment in carbon dioxide (CO2) emission that causing the global warming. The most promising mitigation strategy is by deploying Carbon Capture and Storage (CCS) technology where mineral carbonation was identified as the safest method for permanent storage and does not require continuous monitoring. Accordingly, National Green Technology was launched in 2009 to support the growth of green technology development in Malaysia as a carbon mitigation strategy. Thus, this paper aims to propose the development of a conceptual eco-design for Low Energy Mechanical Milling (LEMM). The concept was proposed by using the Quality Function Deployment (QFD) tool with combination of sustainability determinants (DFS) namely economic, environmental and social which evaluated using Solidworks 2015 sustainability assessment. The results show the new product targets for LEMM in prior on energy consumption (MJ), selling price (MYR), material cost (MYR), carbon footprint (kg CO2) with weightage of 5.2, 4.2, 3.6 and 3.6 respectively. The implementation of DFS criteria into the QFD promote to reduce material used by 16%, 35% reduction of carbon footprint, 28% less energy consumption, 28% lower air acidification, 77% of water eutrophication declined and increased recyclability by 15%.

Security Quality Requirements Engineering (SQUARE) Methodology

DTIC Science & Technology

2005-11-01

such as Joint Application Development and the Accelerated Requirements Method [Wood 89, Hubbard 99] • Soft Systems Methodology [Checkland 89...investigated were misuse cases [Jacobson 92], Soft Systems Methodology (SSM) [Checkland 89], Quality Function Deployment (QFD) [QFD 05], Con- trolled...html (2005). [Checkland 89] Checkland, Peter. Soft Systems Methodology . Rational Analysis for a Problematic World. New York, NY: John Wiley & Sons

Designing Products Using Quality Function Deployment and Conjoint Analysis: A Comparison in a Market for Elderly People

NASA Astrophysics Data System (ADS)

Abu-Assab, Samah; Baier, Daniel

In this paper, we compare two product design approaches, quality function deployment (QFD) and conjoint analysis (CA), on the example of mobile phones for elderly people as a target group. Then, we compare between our results and the results from former similar comparisons, e.g., Pullman et al. (J Prod Innov Manage 19(5):354-364, 2002) and Katz (J Innov Manage 21:61-63, 2004). In this work, the same procedures and conditions are taken into consideration as that taken by Pullman et al. in their paper. They viewed the relation between the two methods: QFD and CA as a complementary one in which both should be simultaneously implemented since each provide feedback to the other. They concluded that CA is more efficient in reflecting the end-users’ present preferences for the product attributes, whereas QFD is definitely better in satisfying end-users’ needs from the developers’ point of view. Katz in his response from a practitioner’s point of view agreed with Pullman et al. However, he concluded that the two methods are better used sequentially and that QFD should precede conjoint analysis. We test these results in a market for elderly people.

Online Learning Era: Exploring the Most Decisive Determinants of MOOCs in Taiwanese Higher Education

ERIC Educational Resources Information Center

Hsieh, Ming-Yuan

2016-01-01

Because the development of Taiwanese Massive Open Online Course (MOOCs) websites is at this moment full of vitality, this research employs a series of analytical cross-measurements of Quality Function Deployment method of House of Quality (QFD-HOQ) model and Multiple Criteria Decision Making (MCDM) methodology to cross-evaluate the weighted…

A fuzzy model for achieving lean attributes for competitive advantages development using AHP-QFD-PROMETHEE

NASA Astrophysics Data System (ADS)

Roghanian, E.; Alipour, Mohammad

2014-06-01

Lean production has become an integral part of the manufacturing landscape as its link with superior performance and its ability to provide competitive advantage is well accepted among academics and practitioners. Lean production helps producers in overcoming the challenges organizations face through using powerful tools and enablers. However, most companies are faced with restricted resources such as financial and human resources, time, etc., in using these enablers, and are not capable of implementing all these techniques. Therefore, identifying and selecting the most appropriate and efficient tool can be a significant challenge for many companies. Hence, this literature seeks to combine competitive advantages, lean attributes, and lean enablers to determine the most appropriate enablers for improvement of lean attributes. Quality function deployment in fuzzy environment and house of quality matrix are implemented. Throughout the methodology, fuzzy logic is the basis for translating linguistic judgments required for the relationships and correlation matrix to numerical values. Moreover, for final ranking of lean enablers, a multi-criteria decision-making method (PROMETHEE) is adopted. Finally, a case study in automotive industry is presented to illustrate the implementation of the proposed methodology.

Manufacturing process design for multi commodities in agriculture

NASA Astrophysics Data System (ADS)

Prasetyawan, Yudha; Santosa, Andrian Henry

2017-06-01

High-potential commodities within particular agricultural sectors should be accompanied by maximum benefit value that can be attained by both local farmers and business players. In several cases, the business players are small-medium enterprises (SMEs) which have limited resources to perform added value process of the local commodities into the potential products. The weaknesses of SMEs such as the manual production process with low productivity, limited capacity to maintain prices, and unattractive packaging due to conventional production. Agricultural commodity is commonly created into several products such as flour, chips, crackers, oil, juice, and other products. This research was initiated by collecting data by interview method particularly to obtain the perspectives of SMEs as the business players. Subsequently, the information was processed based on the Quality Function Deployment (QFD) to determine House of Quality from the first to fourth level. A proposed design as the result of QFD was produced and evaluated with Technology Assessment Model (TAM) and continued with a revised design. Finally, the revised design was analyzed with financial perspective to obtain the cost structure of investment, operational, maintenance, and workers. The machine that performs manufacturing process, as the result of revised design, was prototyped and tested to determined initial production process. The designed manufacturing process offers IDR 337,897, 651 of Net Present Value (NPV) in comparison with the existing process value of IDR 9,491,522 based on similar production input.

Patent portfolio management: literature review and a proposed model.

PubMed

Conegundes De Jesus, Camila Kiyomi; Salerno, Mario Sergio

2018-05-09

Patents and patent portfolios are gaining attention in the last decades, from the called 'pro-patent era' to the recent billionaire transactions involving patent portfolios. The field is growing in importance, both theoretically and practically and despite having substantial literature on new product development portfolio management, we have not found an article relating this theory to patent portfolios. Areas covered: The paper develops a systematic literature review on patent portfolio management to organize the evolution and tendencies of patent portfolio management, highlighting distinctive features of patent portfolio management. Interview with IP manager of three life sciences companies, including a leading multinational group provided relevant information about patent portfolio management. Expert opinion: Based on the systematic literature review on portfolio management, more specifically, on new product development portfolio theory, and interview the paper proposes the paper proposes a reference model to manage patent portfolios. The model comprises four stages aligned with the three goals of the NPD portfolio management: 1 - Linking strategy of the Company's NPD Portfolio to Patent Portfolio; 2 - Balancing the portfolio in buckets; 3 - Patent Valuation (maximizing valuation); 4 - Regularly reviewing the patent portfolio.

Proposing an Educational Scaling-and-Diffusion Model for Inquiry-Based Learning Designs

ERIC Educational Resources Information Center

Hung, David; Lee, Shu-Shing

2015-01-01

Education cannot adopt the linear model of scaling used by the medical sciences. "Gold standards" cannot be replicated without considering process-in-learning, diversity, and student-variedness in classrooms. This article proposes a nuanced model of educational scaling-and-diffusion, describing the scaling (top-down supports) and…

Medical Acquisition shelf-Life System (MASS) Decision Support Model Systems Documentation

DTIC Science & Technology

1989-05-01

9 I INTRODUCTI ON A. Background In October 1987, LTG Russo hosted a conference with the Military Service Logistics Chiefs...A42,F6.3,F6.2,F9.2,F3.1,AIS,F9.1,A9,F9.0,AI7,F9.0,A9, 00032220 + F5.4,F5.4,F7.4, FIO .0) 00032320 IF(ADQ.EQ.0.O)THEN 00032420 ADQ=QFD*4.0 00032520 END

Fantasy-Testing-Assessment: A Proposed Model for the Investigation of Mate Selection.

ERIC Educational Resources Information Center

Nofz, Michael P.

1984-01-01

Proposes a model for mate selection which outlines three modes of interpersonal relating--fantasy, testing, and assessment (FTA). The model is viewed as a more accurate representation of mate selection processes than suggested by earlier theories, and can be used to clarify couples' understandings of their own relationships. (JAC)

Proposed reporting model update creates dialogue between FASB and not-for-profits.

PubMed

Mosrie, Norman C

2016-04-01

Seeing a need to refresh the current guidelines, the Financial Accounting Standards Board (FASB) proposed an update to the financial accounting and reporting model for not-for-profit entities. In a response to solicited feedback, the board is now revisiting its proposed update and has set forth a plan to finalize its new guidelines. The FASB continues to solicit and respond to feedback as the process progresses.

Evaluation of six NEHRP B/C crustal amplification models proposed for use in western North America

USGS Publications Warehouse

Boore, David; Campbell, Kenneth W.

2016-01-01

We evaluate six crustal amplification models based on National Earthquake Hazards Reduction Program (NEHRP) B/C crustal profiles proposed for use in western North America (WNA) and often used in other active crustal regions where crustal properties are unknown. One of the models is based on an interpolation of generic rock velocity profiles previously proposed for WNA and central and eastern North America (CENA), in conjunction with material densities based on an updated velocity–density relationship. A second model is based on the velocity profile used to develop amplification factors for the Next Generation Attenuation (NGA)‐West2 project. A third model is based on a near‐surface velocity profile developed from the NGA‐West2 site database. A fourth model is based on velocity and density profiles originally proposed for use in CENA but recently used to represent crustal properties in California. We propose two alternatives to this latter model that more closely represent WNA crustal properties. We adopt a value of site attenuation (κ0) for each model that is either recommended by the author of the model or proposed by us. Stochastic simulation is used to evaluate the Fourier amplification factors and their impact on response spectra associated with each model. Based on this evaluation, we conclude that among the available models evaluated in this study the NEHRP B/C amplification model of Boore (2016) best represents median crustal amplification in WNA, although the amplification models based on the crustal profiles of Kamai et al. (2013, 2016, unpublished manuscript, see Data and Resources) and Yenier and Atkinson (2015), the latter adjusted to WNA crustal properties, can be used to represent epistemic uncertainty.

The Proposed Model of Collaborative Virtual Learning Environment for Introductory Programming Course

ERIC Educational Resources Information Center

Othman, Mahfudzah; Othman, Muhaini

2012-01-01

This paper discusses the proposed model of the collaborative virtual learning system for the introductory computer programming course which uses one of the collaborative learning techniques known as the "Think-Pair-Share". The main objective of this study is to design a model for an online learning system that facilitates the…

Proposed Model of Information Behaviour in Crisis: The Case of Hurricane Sandy

ERIC Educational Resources Information Center

Lopatovska, Irene; Smiley, Bobby

2013-01-01

Introduction: The paper proposes a model of information behaviour in crisis. No previous model has attempted to integrate information resources, information behaviour and needs of the storm-affected communities within the temporal stages of a natural disaster. Method: The study was designed as autoethnography. The data were collected through a…

Electric Propulsion System Modeling for the Proposed Prometheus 1 Mission

NASA Technical Reports Server (NTRS)

Fiehler, Douglas; Dougherty, Ryan; Manzella, David

2005-01-01

The proposed Prometheus 1 spacecraft would utilize nuclear electric propulsion to propel the spacecraft to its ultimate destination where it would perform its primary mission. As part of the Prometheus 1 Phase A studies, system models were developed for each of the spacecraft subsystems that were integrated into one overarching system model. The Electric Propulsion System (EPS) model was developed using data from the Prometheus 1 electric propulsion technology development efforts. This EPS model was then used to provide both performance and mass information to the Prometheus 1 system model for total system trades. Development of the EPS model is described, detailing both the performance calculations as well as its evolution over the course of Phase A through three technical baselines. Model outputs are also presented, detailing the performance of the model and its direct relationship to the Prometheus 1 technology development efforts. These EP system model outputs are also analyzed chronologically showing the response of the model development to the four technical baselines during Prometheus 1 Phase A.

The integration of quality function deployment and Kansei Engineering: An overview of application

NASA Astrophysics Data System (ADS)

Lokman, Anitawati Mohd; Awang, Ahmad Azran; Omar, Abdul Rahman; Abdullah, Nur Atiqah Sia

2016-02-01

As a result of today's globalized world and robust development of emerging markets, consumers are able to select from an endless number of products that are mostly similar in terms of design and properties, as well as equivalent in function and performance. The survival of businesses in a competitive ambience requires innovation, consumer loyalty, and products that are easily identifiable by consumers. Today's manufacturers have started to employ customer research instruments to survive in the highly industrialized world—for example, Conjoint Analysis, Design of Experiments and Semantic Design of Environment. However, this work only attempts to concentrate on Kansei Engineering and Quality Function Deployment. Kansei Engineering (KE) is deemed as the most appropriate method to link consumers' feelings, emotions or senses to the properties of a product because it translates people's impressions, interests, and feelings to the solutions of product design. Likewise, Quality Function Deployment (QFD) enables clearer interpretation of the needs of consumers, better concepts or products, and enhanced communication to internal operations that must then manufacture and deliver the product or services. The integration of both KE and QFD is believed possible, as many product manufacturers and businesses have started to utilize systematized methods to translate consumers' needs and wants into processes and products. Therefore, this work addresses areas of various integrations of KE and QFD processes in the industry, in an effort to assist an integration of KE and QFD. This work aims to provide evidence on the integration mechanism to enable successful incorporation of consumer's implicit feelings and demands into product quality improvement, and simultaneously providing an overview of both KE and QFD from the perspective of a novice.

A hydrodynamic modelling of proposed dams in reducing flood hazard in Kelantan Catchment

NASA Astrophysics Data System (ADS)

Maruti, S. F.; Amerudin, S.; Kadir, W. H. W.; Yusof, Z. M.

2018-04-01

Flood is natural disaster that can cause damage and death. The flood that hit Kelantan in 2014 was the worst flood in Malaysian history. Although the disaster could not be avoided, awareness and preparedness could have helped to reduce the impact. Kuala Krai located at the downstream area in Kelantan catchment is the most affected due to the 2014 floods. The confluence of Lebir and Galas rivers into Kelantan river has led to the increase of flood magnitude to the downstream area. Therefore, Kemubu dam and Lebir dam, located along Galas river and Lebir river, respectively, have been proposed by the Kelantan authority to reduce the flood hazard. In this paper, a hydrodynamic modelling study is carried out, which is coupled of 1D and 2D model to simulate the flood event with and without the proposed dams. The model is developed using a Digital Terrain Model (DTM), which was generated from Airborne LiDAR and SRTM data sources. The hydrograph and water level for 2014 floods event were obtained and was set as an input data for boundary conditions. The modelling results of maximum velocity of 33 m/s and water depth of 19 m were used to generate flood hazard map. The result has found that the proposed dams were able to reduce the flood hazard, particularly at Kuala Krai, Kelantan.

A Quality Function Deployment Method Applied to Highly Reusable Space Transportation

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2016-01-01

This paper will describe a Quality Function Deployment (QFD) currently in work the goal of which is to add definition and insight to the development of long term Highly Reusable Space Transportation (HRST). The objective here is twofold. First, to describe the process, the actual QFD experience as applies to the HRST study. Second, to describe the preliminary results of this process, in particular the assessment of possible directions for future pursuit such as promising candidate technologies or approaches that may finally open the space frontier. The iterative and synergistic nature of QFD provides opportunities in the process for the discovery of what is key in so far as it is useful, what is not, and what is merely true. Key observations on the QFD process will be presented. The importance of a customer definition as well as the similarity of the process of developing a technology portfolio to product development will be shown. Also, the relation of identified cost and operating drivers to future space vehicle designs that are robust to an uncertain future will be discussed. The results in particular of this HRST evaluation will be preliminary given the somewhat long term (or perhaps not?) nature of the task being considered.

Determining the need for improvement of infant incubator design with quality function deployment

NASA Astrophysics Data System (ADS)

Tarigan, U.; Ginting, R.; Siregar, I.

2018-02-01

A Newborns need particular attention because it takes time to adapt to the outside world. In accordance with the standard post-neonatal procedures, newborns should be incorporated into the incubator within a specified period of time according to the infant’s health level. Infant incubator as a medical device used to care for newborns, often get complaints from doctors and child nurses. The complaint indicates consumer dissatisfaction with incubator products in the hospital. Broadly speaking, objection against infant incubators lie in inappropriate designs. To overcome these complaints the researchers apply the method of Quality Function Deployment to determine the characteristics of priority techniques in accordance with the wishes of consumers with it. The primary focus of QFD is to engage customers in the product development process as early as possible, which their needs and desires serve as the starting point of the QFD process. Therefore, QFD is called the voice of customer. The underlying philosophy is that customers are not always satisfied with a product even though the product has been perfectly produced. The results show that the category used as a priority improvement is the additional function of the oxygen cylinder and the size of the door hole. QFD phase one produces technical characteristics of Ergonomy, Features and Cost as critical part determinants.

Proposal: A Hybrid Dictionary Modelling Approach for Malay Tweet Normalization

NASA Astrophysics Data System (ADS)

Muhamad, Nor Azlizawati Binti; Idris, Norisma; Arshi Saloot, Mohammad

2017-02-01

Malay Twitter message presents a special deviation from the original language. Malay Tweet widely used currently by Twitter users, especially at Malaya archipelago. Thus, it is important to make a normalization system which can translated Malay Tweet language into the standard Malay language. Some researchers have conducted in natural language processing which mainly focuses on normalizing English Twitter messages, while few studies have been done for normalize Malay Tweets. This paper proposes an approach to normalize Malay Twitter messages based on hybrid dictionary modelling methods. This approach normalizes noisy Malay twitter messages such as colloquially language, novel words, and interjections into standard Malay language. This research will be used Language Model and N-grams model.

Male body dissatisfaction scale (MBDS): proposal for a reduced model.

PubMed

da Silva, Wanderson Roberto; Marôco, João; Ochner, Christopher N; Campos, Juliana Alvares Duarte Bonini

2017-09-01

To evaluate the psychometric properties of the male body dissatisfaction scale (MBDS) in Brazilian and Portuguese university students; to present a reduced model of the scale; to compare two methods of computing global scores for participants' body dissatisfaction; and to estimate the prevalence of participants' body dissatisfaction. A total of 932 male students participated in this study. A confirmatory factor analysis (CFA) was used to assess the scale's psychometric properties. Multi-group analysis was used to test transnational invariance and invariance in independent samples. The body dissatisfaction score was calculated using two methods (mean and matrix of weights in the CFA), which were compared. Finally, individuals were classified according to level of body dissatisfaction, using the best method. The MBDS model did not show adequate fit for the sample and was, therefore, refined. Thirteen items were excluded and two factors were combined. A reduced model of 12 items and 2 factors was proposed and shown to have adequate psychometric properties. There was a significant difference (p < 0.001) between the methods for calculating the score for body dissatisfaction, since the mean overestimated the scores. Among student participants, the prevalence of body dissatisfaction with musculature and general appearance was 11.2 and 5.3%, respectively. The reduced bi-factorial model of the MBDS showed adequate validity, reliability, and transnational invariance and invariance in independent samples for Brazilian and Portuguese students. The new proposal for calculating the global score was able to more accurately show their body dissatisfaction. No level of evidence Basic Science.

Avian Models for Human Cognitive Neuroscience: A Proposal.

PubMed

Clayton, Nicola S; Emery, Nathan J

2015-06-17

Research on avian cognitive neuroscience over the past two decades has revealed the avian brain to be a better model for understanding human cognition than previously thought, despite differences in the neuroarchitecture of avian and mammalian brains. The brain, behavior, and cognition of songbirds have provided an excellent model of human cognition in one domain, namely learning human language and the production of speech. There are other important behavioral candidates of avian cognition, however, notably the capacity of corvids to remember the past and plan for the future, as well as their ability to think about another's perspective, and physical reasoning. We review this work and assess the evidence that the corvid brain can support such a cognitive architecture. We propose potential applications of these behavioral paradigms for cognitive neuroscience, including recent work on single-cell recordings and neuroimaging in corvids. Finally, we discuss their impact on understanding human developmental cognition. Copyright © 2015 Elsevier Inc. All rights reserved.

Assessment of nutritional status in the elderly: a proposed function-driven model.

PubMed

Engelheart, Stina; Brummer, Robert

2018-01-01

There is no accepted or standardized definition of 'malnutrition'. Hence, there is also no definition of what constitutes an adequate nutritional status. In elderly people, assessment of nutritional status is complex and is complicated by multi-morbidity and disabilities combined with nutrition-related problems, such as dysphagia, decreased appetite, fatigue, and muscle weakness. We propose a nutritional status model that presents nutritional status from a comprehensive functional perspective. This model visualizes the complexity of the nutritional status in elderly people. The presented model could be interpreted as the nutritional status is conditional to a person's optimal function or situation. Another way of looking at it might be that a person's nutritional status affects his or her optimal situation. The proposed model includes four domains: (1) physical function and capacity; (2) health and somatic disorders; (3) food and nutrition; and (4) cognitive, affective, and sensory function. Each domain has a major impact on nutritional status, which in turn has a major impact on the outcome of each domain. Nutritional status is a multifaceted concept and there exist several knowledge gaps in the diagnosis, prevention, and optimization of treatment of inadequate nutritional status in elderly people. The nutritional status model may be useful in nutritional assessment research, as well as in the clinical setting.

Sleep Medicine Care Under One Roof: A Proposed Model for Integrating Dentistry and Medicine

PubMed Central

Sharma, Sunil; Essick, Greg; Schwartz, David; Aronsky, Amy J.

2013-01-01

Integrating oral appliance therapy into the delivery of care for sleeprelated breathing disorders has been a challenge for dental and medical professionals alike. We review the difficulties that have been faced and propose a multidisciplinary care delivery model that integrates dental sleep medicine and sleep medicine under the same roof with educational and research components. The model promises to offer distinct advantages to improved patient care, continuity of treatment, and the central coordination of clinical and insurance-related benefits. Citation: Sharma S; Essick G; Schwartz D; Aronsky AJ. Sleep medicine care under one roof: a proposed model for integrating dentistry and medicine. J Clin Sleep Med 2013;9(8):827-833. PMID:23946715

77 FR 4586 - Notice of Opportunity for Public Comment on the Proposed Models for Plant-Specific Adoption of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-30

... Comment on the Proposed Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler... on the proposed model safety evaluation (SE) for plant- specific adoption of Technical Specifications... System (ADAMS) under Accession Number ML103360003; the model application is available in ADAMS under...

Assessment of nutritional status in the elderly: a proposed function-driven model

PubMed Central

Engelheart, Stina; Brummer, Robert

2018-01-01

Background There is no accepted or standardized definition of ‘malnutrition’. Hence, there is also no definition of what constitutes an adequate nutritional status. In elderly people, assessment of nutritional status is complex and is complicated by multi-morbidity and disabilities combined with nutrition-related problems, such as dysphagia, decreased appetite, fatigue, and muscle weakness. Objective We propose a nutritional status model that presents nutritional status from a comprehensive functional perspective. This model visualizes the complexity of the nutritional status in elderly people. Design and results The presented model could be interpreted as the nutritional status is conditional to a person’s optimal function or situation. Another way of looking at it might be that a person’s nutritional status affects his or her optimal situation. The proposed model includes four domains: (1) physical function and capacity; (2) health and somatic disorders; (3) food and nutrition; and (4) cognitive, affective, and sensory function. Each domain has a major impact on nutritional status, which in turn has a major impact on the outcome of each domain. Conclusions Nutritional status is a multifaceted concept and there exist several knowledge gaps in the diagnosis, prevention, and optimization of treatment of inadequate nutritional status in elderly people. The nutritional status model may be useful in nutritional assessment research, as well as in the clinical setting. PMID:29720931

Leveraging ISI Multi-Model Prediction for Navy Operations: Proposal to the Office of Naval Research

DTIC Science & Technology

2014-09-30

ISI Multi-Model Prediction for Navy Operations: Proposal to the Office of Naval Research PI: James L. Kinter III Director, Center for Ocean-Land...TYPE 3. DATES COVERED 00-00-2014 to 00-00-2014 4. TITLE AND SUBTITLE Leveraging ISI Multi-Model Prediction for Navy Operations: Proposal to the ... Office of Naval Research 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f

Response Surface Modeling Tolerance and Inference Error Risk Specifications: Proposed Industry Standards

NASA Technical Reports Server (NTRS)

DeLoach, Richard

2012-01-01

This paper reviews the derivation of an equation for scaling response surface modeling experiments. The equation represents the smallest number of data points required to fit a linear regression polynomial so as to achieve certain specified model adequacy criteria. Specific criteria are proposed which simplify an otherwise rather complex equation, generating a practical rule of thumb for the minimum volume of data required to adequately fit a polynomial with a specified number of terms in the model. This equation and the simplified rule of thumb it produces can be applied to minimize the cost of wind tunnel testing.

Prioritization methodology for chemical replacement

NASA Technical Reports Server (NTRS)

Goldberg, Ben; Cruit, Wendy; Schutzenhofer, Scott

1995-01-01

This methodology serves to define a system for effective prioritization of efforts required to develop replacement technologies mandated by imposed and forecast legislation. The methodology used is a semi quantitative approach derived from quality function deployment techniques (QFD Matrix). QFD is a conceptual map that provides a method of transforming customer wants and needs into quantitative engineering terms. This methodology aims to weight the full environmental, cost, safety, reliability, and programmatic implications of replacement technology development to allow appropriate identification of viable candidates and programmatic alternatives.

[Social determinants of odontalgia in epidemiological studies: theoretical review and proposed conceptual model].

PubMed

Bastos, João Luiz Dornelles; Gigante, Denise Petrucci; Peres, Karen Glazer; Nedel, Fúlvio Borges

2007-01-01

The epidemiological literature has been limited by the absence of a theoretical framework reflecting the complexity of causal mechanisms for the occurrence of health phenomena / disease conditions. In the field of oral epidemiology, such lack of theory also prevails, since dental caries the leading topic in oral research has been often studied through a biological and reductionist viewpoint. One of the most important consequences of dental caries is dental pain (odontalgia), which has received little attention in studies with sophisticated theoretical models and powerful designs to establish causal relationships. The purpose of this study is to review the scientific literature on the determinants of odontalgia and to discuss theories proposed for the explanation of the phenomenon. Conceptual models and emerging theories on the social determinants of oral health are revised, in an attempt to build up links with the bio-psychosocial pain model, proposing a more elaborate causal model for odontalgia. The framework suggests causal pathways between social structure and oral health through material, psychosocial and behavioral pathways. Aspects of the social structure are highlighted in order to relate them to odontalgia, stressing their importance in discussions of causal relationships in oral health research.

A proposed model curriculum in global child health for pediatric residents.

PubMed

Suchdev, Parminder S; Shah, Ankoor; Derby, Kiersten S; Hall, Lauren; Schubert, Chuck; Pak-Gorstein, Suzinne; Howard, Cindy; Wagner, Sabrina; Anspacher, Melanie; Staton, Donna; O'Callahan, Cliff; Herran, Marisa; Arnold, Linda; Stewart, Christopher C; Kamat, Deepak; Batra, Maneesh; Gutman, Julie

2012-01-01

In response to the increasing engagement in global health (GH) among pediatric residents and faculty, academic GH training opportunities are growing rapidly in scale and number. However, consensus to guide residency programs regarding best practice guidelines or model curricula has not been established. We aimed to highlight critical components of well-established GH tracks and develop a model curriculum in GH for pediatric residency programs. We identified 43 existing formal GH curricula offered by U.S. pediatric residency programs in April 2011 and selected 8 programs with GH tracks on the basis of our inclusion criteria. A working group composed of the directors of these GH tracks, medical educators, and trainees and faculty with GH experience collaborated to develop a consensus model curriculum, which included GH core topics, learning modalities, and approaches to evaluation within the framework of the competencies for residency education outlined by the Accreditation Council for Graduate Medical Education. Common curricular components among the identified GH tracks included didactics in various topics of global child health, domestic and international field experiences, completion of a scholarly project, and mentorship. The proposed model curriculum identifies strengths of established pediatric GH tracks and uses competency-based learning objectives. This proposed pediatric GH curriculum based on lessons learned by directors of established GH residency tracks will support residency programs in creating and sustaining successful programs in GH education. The curriculum can be adapted to fit the needs of various programs, depending on their resources and focus areas. Evaluation outcomes need to be standardized so that the impact of this curriculum can be effectively measured. Copyright © 2012 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

NTP comparison process

NASA Technical Reports Server (NTRS)

Corban, Robert

1993-01-01

The systems engineering process for the concept definition phase of the program involves requirements definition, system definition, and consistent concept definition. The requirements definition process involves obtaining a complete understanding of the system requirements based on customer needs, mission scenarios, and nuclear thermal propulsion (NTP) operating characteristics. A system functional analysis is performed to provide a comprehensive traceability and verification of top-level requirements down to detailed system specifications and provides significant insight into the measures of system effectiveness to be utilized in system evaluation. The second key element in the process is the definition of system concepts to meet the requirements. This part of the process involves engine system and reactor contractor teams to develop alternative NTP system concepts that can be evaluated against specific attributes, as well as a reference configuration against which to compare system benefits and merits. Quality function deployment (QFD), as an excellent tool within Total Quality Management (TQM) techniques, can provide the required structure and provide a link to the voice of the customer in establishing critical system qualities and their relationships. The third element of the process is the consistent performance comparison. The comparison process involves validating developed concept data and quantifying system merits through analysis, computer modeling, simulation, and rapid prototyping of the proposed high risk NTP subsystems. The maximum amount possible of quantitative data will be developed and/or validated to be utilized in the QFD evaluation matrix. If upon evaluation of a new concept or its associated subsystems determine to have substantial merit, those features will be incorporated into the reference configuration for subsequent system definition and comparison efforts.

Proposal for Classifying the Severity of Speech Disorder Using a Fuzzy Model in Accordance with the Implicational Model of Feature Complexity

ERIC Educational Resources Information Center

Brancalioni, Ana Rita; Magnago, Karine Faverzani; Keske-Soares, Marcia

2012-01-01

The objective of this study is to create a new proposal for classifying the severity of speech disorders using a fuzzy model in accordance with a linguistic model that represents the speech acquisition of Brazilian Portuguese. The fuzzy linguistic model was run in the MATLAB software fuzzy toolbox from a set of fuzzy rules, and it encompassed…

76 FR 9614 - Notice of Availability of the Proposed Models for Plant-Specific Adoption of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-18

... NUCLEAR REGULATORY COMMISSION [NRC-2011-0039] Notice of Availability of the Proposed Models for..., ``Technical Specifications End States, NEDC-32988-A,'' for Boiling Water Reactor Plants Using the Consolidated... Availability. SUMMARY: The NRC is announcing the availability of the model application (with model no...

Generating Alternative Proposals for the Louvre Using Procedural Modeling

NASA Astrophysics Data System (ADS)

Calogero, E.; Arnold, D.

2011-09-01

This paper presents the process of reconstructing two facade designs for the East wing of the Louvre using procedural modeling. The first proposal reconstructed is Louis Le Vau's 1662 scheme and the second is the 1668 design of the "petit conseil" that still stands today. The initial results presented show how such reconstructions may aid general and expert understanding of the two designs. It is claimed that by formalizing the facade description into a shape grammar in CityEngine, a systematized approach to a stylistic analysis is possible. It is also asserted that such an analysis is still best understood in the historical context of what is known about the contemporary design intentions of the building creators and commissioners.

System Architecture Modeling for Technology Portfolio Management using ATLAS

NASA Technical Reports Server (NTRS)

Thompson, Robert W.; O'Neil, Daniel A.

2006-01-01

Strategic planners and technology portfolio managers have traditionally relied on consensus-based tools, such as Analytical Hierarchy Process (AHP) and Quality Function Deployment (QFD) in planning the funding of technology development. While useful to a certain extent, these tools are limited in the ability to fully quantify the impact of a technology choice on system mass, system reliability, project schedule, and lifecycle cost. The Advanced Technology Lifecycle Analysis System (ATLAS) aims to provide strategic planners a decision support tool for analyzing technology selections within a Space Exploration Architecture (SEA). Using ATLAS, strategic planners can select physics-based system models from a library, configure the systems with technologies and performance parameters, and plan the deployment of a SEA. Key parameters for current and future technologies have been collected from subject-matter experts and other documented sources in the Technology Tool Box (TTB). ATLAS can be used to compare the technical feasibility and economic viability of a set of technology choices for one SEA, and compare it against another set of technology choices or another SEA. System architecture modeling in ATLAS is a multi-step process. First, the modeler defines the system level requirements. Second, the modeler identifies technologies of interest whose impact on an SEA. Third, the system modeling team creates models of architecture elements (e.g. launch vehicles, in-space transfer vehicles, crew vehicles) if they are not already in the model library. Finally, the architecture modeler develops a script for the ATLAS tool to run, and the results for comparison are generated.

Predicting wetland plant community responses to proposed water-level-regulation plans for Lake Ontario: GIS-based modeling

USGS Publications Warehouse

Wilcox, D.A.; Xie, Y.

2007-01-01

Integrated, GIS-based, wetland predictive models were constructed to assist in predicting the responses of wetland plant communities to proposed new water-level regulation plans for Lake Ontario. The modeling exercise consisted of four major components: 1) building individual site wetland geometric models; 2) constructing generalized wetland geometric models representing specific types of wetlands (rectangle model for drowned river mouth wetlands, half ring model for open embayment wetlands, half ellipse model for protected embayment wetlands, and ellipse model for barrier beach wetlands); 3) assigning wetland plant profiles to the generalized wetland geometric models that identify associations between past flooding / dewatering events and the regulated water-level changes of a proposed water-level-regulation plan; and 4) predicting relevant proportions of wetland plant communities and the time durations during which they would be affected under proposed regulation plans. Based on this conceptual foundation, the predictive models were constructed using bathymetric and topographic wetland models and technical procedures operating on the platform of ArcGIS. An example of the model processes and outputs for the drowned river mouth wetland model using a test regulation plan illustrates the four components and, when compared against other test regulation plans, provided results that met ecological expectations. The model results were also compared to independent data collected by photointerpretation. Although data collections were not directly comparable, the predicted extent of meadow marsh in years in which photographs were taken was significantly correlated with extent of mapped meadow marsh in all but barrier beach wetlands. The predictive model for wetland plant communities provided valuable input into International Joint Commission deliberations on new regulation plans and was also incorporated into faunal predictive models used for that purpose.

Proposal for classifying the severity of speech disorder using a fuzzy model in accordance with the implicational model of feature complexity.

PubMed

Brancalioni, Ana Rita; Magnago, Karine Faverzani; Keske-Soares, Marcia

2012-09-01

The objective of this study is to create a new proposal for classifying the severity of speech disorders using a fuzzy model in accordance with a linguistic model that represents the speech acquisition of Brazilian Portuguese. The fuzzy linguistic model was run in the MATLAB software fuzzy toolbox from a set of fuzzy rules, and it encompassed three input variables: path routing, level of complexity and phoneme acquisition. The output was the Speech Disorder Severity Index, and it used the following fuzzy subsets: severe, moderate severe, mild moderate and mild. The proposal was used for 204 children with speech disorders who were monolingual speakers of Brazilian Portuguese. The fuzzy linguistic model provided the Speech Disorder Severity Index for all of the evaluated phonological systems in a fast and practical manner. It was then possible to classify the systems according to the severity of the speech disorder as severe, moderate severe, mild moderate and mild; the speech disorders could also be differentiated according to the severity index.

Conceptual design and structural analysis for an 8.4-m telescope

NASA Astrophysics Data System (ADS)

Mendoza, Manuel; Farah, Alejandro; Ruiz Schneider, Elfego

2004-09-01

This paper describes the conceptual design of the optics support structures of a telescope with a primary mirror of 8.4 m, the same size as a Large Binocular Telescope (LBT) primary mirror. The design goal is to achieve a structure for supporting the primary and secondary mirrors and keeping them joined as rigid as possible. With this purpose an optimization with several models was done. This iterative design process includes: specifications development, concepts generation and evaluation. Process included Finite Element Analysis (FEA) as well as other analytical calculations. Quality Function Deployment (QFD) matrix was used to obtain telescope tube and spider specifications. Eight spiders and eleven tubes geometric concepts were proposed. They were compared in decision matrixes using performance indicators and parameters. Tubes and spiders went under an iterative optimization process. The best tubes and spiders concepts were assembled together. All assemblies were compared and ranked according to their performance.

Exploring the Validity of Proposed Transgenic Animal Models of Attention-Deficit Hyperactivity Disorder (ADHD).

PubMed

de la Peña, June Bryan; Dela Peña, Irene Joy; Custodio, Raly James; Botanas, Chrislean Jun; Kim, Hee Jin; Cheong, Jae Hoon

2018-05-01

Attention-deficit/hyperactivity disorder (ADHD) is a common, behavioral, and heterogeneous neurodevelopmental condition characterized by hyperactivity, impulsivity, and inattention. Symptoms of this disorder are managed by treatment with methylphenidate, amphetamine, and/or atomoxetine. The cause of ADHD is unknown, but substantial evidence indicates that this disorder has a significant genetic component. Transgenic animals have become an essential tool in uncovering the genetic factors underlying ADHD. Although they cannot accurately reflect the human condition, they can provide insights into the disorder that cannot be obtained from human studies due to various limitations. An ideal animal model of ADHD must have face (similarity in symptoms), predictive (similarity in response to treatment or medications), and construct (similarity in etiology or underlying pathophysiological mechanism) validity. As the exact etiology of ADHD remains unclear, the construct validity of animal models of ADHD would always be limited. The proposed transgenic animal models of ADHD have substantially increased and diversified over the years. In this paper, we compiled and explored the validity of proposed transgenic animal models of ADHD. Each of the reviewed transgenic animal models has strengths and limitations. Some fulfill most of the validity criteria of an animal model of ADHD and have been extensively used, while there are others that require further validation. Nevertheless, these transgenic animal models of ADHD have provided and will continue to provide valuable insights into the genetic underpinnings of this complex disorder.

Stress, autonomic imbalance, and the prediction of metabolic risk: A model and a proposal for research.

PubMed

Wulsin, Lawson; Herman, James; Thayer, Julian F

2018-03-01

Devising novel prevention strategies for metabolic disorders will depend in part on the careful elucidation of the common pathways for developing metabolic risks. The neurovisceral integration model has proposed that autonomic imbalance plays an important role in the pathway from acute and chronic stress to cardiovascular disease. Though generally overlooked by clinicians, autonomic imbalance (sympathetic overactivity and/or parasympathetic underactivity) can be measured and modified by methods that are available in primary care. This review applies the neurovisceral integration concept to the clinical setting by proposing that autonomic imbalance plays a primary role in the development of metabolic risks. We present a testable model, a systematic review of the evidence in support of autonomic imbalance as a predictor for metabolic risks, and specific approaches to test this model as a guide to future research on the role of stress in metabolic disorders. We propose that autonomic imbalance deserves consideration by researchers, clinicians, and policymakers as a target for early interventions to prevent metabolic disorders. Published by Elsevier Ltd.

PROPOSED SUITE OF MODELS FOR ESTIMATING DOSE RESULTING FROM EXPOSURES BY THE DERMAL ROUTE

EPA Science Inventory

Recent risk assessment guidance emphasizes consideration of mechanistic factors for influencing disposition of a toxicant. To incorporate mechanistic information into risk assessment, a suite of models is proposed for use in characterizing and quantifying dosimetry of toxic age...

Proposed Core Competencies and Empirical Validation Procedure in Competency Modeling: Confirmation and Classification.

PubMed

Baczyńska, Anna K; Rowiński, Tomasz; Cybis, Natalia

2016-01-01

Competency models provide insight into key skills which are common to many positions in an organization. Moreover, there is a range of competencies that is used by many companies. Researchers have developed core competency terminology to underline their cross-organizational value. The article presents a theoretical model of core competencies consisting of two main higher-order competencies called performance and entrepreneurship. Each of them consists of three elements: the performance competency includes cooperation, organization of work and goal orientation, while entrepreneurship includes innovativeness, calculated risk-taking and pro-activeness. However, there is lack of empirical validation of competency concepts in organizations and this would seem crucial for obtaining reliable results from organizational research. We propose a two-step empirical validation procedure: (1) confirmation factor analysis, and (2) classification of employees. The sample consisted of 636 respondents (M = 44.5; SD = 15.1). Participants were administered a questionnaire developed for the study purpose. The reliability, measured by Cronbach's alpha, ranged from 0.60 to 0.83 for six scales. Next, we tested the model using a confirmatory factor analysis. The two separate, single models of performance and entrepreneurial orientations fit quite well to the data, while a complex model based on the two single concepts needs further research. In the classification of employees based on the two higher order competencies we obtained four main groups of employees. Their profiles relate to those found in the literature, including so-called niche finders and top performers. Some proposal for organizations is discussed.

Proposed Core Competencies and Empirical Validation Procedure in Competency Modeling: Confirmation and Classification

PubMed Central

Baczyńska, Anna K.; Rowiński, Tomasz; Cybis, Natalia

2016-01-01

Competency models provide insight into key skills which are common to many positions in an organization. Moreover, there is a range of competencies that is used by many companies. Researchers have developed core competency terminology to underline their cross-organizational value. The article presents a theoretical model of core competencies consisting of two main higher-order competencies called performance and entrepreneurship. Each of them consists of three elements: the performance competency includes cooperation, organization of work and goal orientation, while entrepreneurship includes innovativeness, calculated risk-taking and pro-activeness. However, there is lack of empirical validation of competency concepts in organizations and this would seem crucial for obtaining reliable results from organizational research. We propose a two-step empirical validation procedure: (1) confirmation factor analysis, and (2) classification of employees. The sample consisted of 636 respondents (M = 44.5; SD = 15.1). Participants were administered a questionnaire developed for the study purpose. The reliability, measured by Cronbach’s alpha, ranged from 0.60 to 0.83 for six scales. Next, we tested the model using a confirmatory factor analysis. The two separate, single models of performance and entrepreneurial orientations fit quite well to the data, while a complex model based on the two single concepts needs further research. In the classification of employees based on the two higher order competencies we obtained four main groups of employees. Their profiles relate to those found in the literature, including so-called niche finders and top performers. Some proposal for organizations is discussed. PMID:27014111

75 FR 16840 - Proposed Extension of Information Collection Request Submitted for Public Comment; Model Employer...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-02

... DEPARTMENT OF LABOR Employee Benefits Security Administration Proposed Extension of Information Collection Request Submitted for Public Comment; Model Employer CHIP Notice AGENCY: Employee Benefits... Employee Benefits Security [[Page 16841

Evidence-based ergonomics: a model and conceptual structure proposal.

PubMed

Silveira, Dierci Marcio

2012-01-01

In Human Factors and Ergonomics Science (HFES), it is difficult to identify what is the best approach to tackle the workplace and systems design problems which needs to be solved, and it has been also advocated as transdisciplinary and multidisciplinary the issue of "How to solve the human factors and ergonomics problems that are identified?". The proposition on this study is to combine the theoretical approach for Sustainability Science, the Taxonomy of the Human Factors and Ergonomics (HFE) discipline and the framework for Evidence-Based Medicine in an attempt to be applied in Human Factors and Ergonomics. Applications of ontologies are known in the field of medical research and computer science. By scrutinizing the key requirements for the HFES structuring of knowledge, it was designed a reference model, First, it was identified the important requirements for HFES Concept structuring, as regarded by Meister. Second, it was developed an evidence-based ergonomics framework as a reference model composed of six levels based on these requirements. Third, it was devised a mapping tool using linguistic resources to translate human work, systems environment and the complexities inherent to their hierarchical relationships to support future development at Level 2 of the reference model and for meeting the two major challenges for HFES, namely, identifying what problems should be addressed in HFE as an Autonomous Science itself and proposing solutions by integrating concepts and methods applied in HFES for those problems.

Leveraging ISI Multi-Model Prediction for Navy Operations: Proposal to the Office of Naval Research

DTIC Science & Technology

2013-09-30

Proposal to the Office of Naval Research James Kinter Director, Center for Ocean-Land-Atmosphere Studies Professor, Climate Dynamics...TYPE 3. DATES COVERED 00-00-2013 to 00-00-2013 4. TITLE AND SUBTITLE Leveraging ISI Multi-Model Prediction for Navy Operations: Proposal to the ... Office of Naval Research 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK

Proposal of Constraints Analysis Method Based on Network Model for Task Planning

NASA Astrophysics Data System (ADS)

Tomiyama, Tomoe; Sato, Tatsuhiro; Morita, Toyohisa; Sasaki, Toshiro

Deregulation has been accelerating several activities toward reengineering business processes, such as railway through service and modal shift in logistics. Making those activities successful, business entities have to regulate new business rules or know-how (we call them ‘constraints’). According to the new constraints, they need to manage business resources such as instruments, materials, workers and so on. In this paper, we propose a constraint analysis method to define constraints for task planning of the new business processes. To visualize each constraint's influence on planning, we propose a network model which represents allocation relations between tasks and resources. The network can also represent task ordering relations and resource grouping relations. The proposed method formalizes the way of defining constraints manually as repeatedly checking the network structure and finding conflicts between constraints. Being applied to crew scheduling problems shows that the method can adequately represent and define constraints of some task planning problems with the following fundamental features, (1) specifying work pattern to some resources, (2) restricting the number of resources for some works, (3) requiring multiple resources for some works, (4) prior allocation of some resources to some works and (5) considering the workload balance between resources.

Proposed framework for thermomechanical life modeling of metal matrix composites

NASA Technical Reports Server (NTRS)

Halford, Gary R.; Lerch, Bradley A.; Saltsman, James F.

1993-01-01

The framework of a mechanics of materials model is proposed for thermomechanical fatigue (TMF) life prediction of unidirectional, continuous-fiber metal matrix composites (MMC's). Axially loaded MMC test samples are analyzed as structural components whose fatigue lives are governed by local stress-strain conditions resulting from combined interactions of the matrix, interfacial layer, and fiber constituents. The metallic matrix is identified as the vehicle for tracking fatigue crack initiation and propagation. The proposed framework has three major elements. First, TMF flow and failure characteristics of in situ matrix material are approximated from tests of unreinforced matrix material, and matrix TMF life prediction equations are numerically calibrated. The macrocrack initiation fatigue life of the matrix material is divided into microcrack initiation and microcrack propagation phases. Second, the influencing factors created by the presence of fibers and interfaces are analyzed, characterized, and documented in equation form. Some of the influences act on the microcrack initiation portion of the matrix fatigue life, others on the microcrack propagation life, while some affect both. Influencing factors include coefficient of thermal expansion mismatch strains, residual (mean) stresses, multiaxial stress states, off-axis fibers, internal stress concentrations, multiple initiation sites, nonuniform fiber spacing, fiber debonding, interfacial layers and cracking, fractured fibers, fiber deflections of crack fronts, fiber bridging of matrix cracks, and internal oxidation along internal interfaces. Equations exist for some, but not all, of the currently identified influencing factors. The third element is the inclusion of overriding influences such as maximum tensile strain limits of brittle fibers that could cause local fractures and ensuing catastrophic failure of surrounding matrix material. Some experimental data exist for assessing the plausibility of the proposed

Using quality function deployment to capture the voice of the customer and translate it into the voice of the provider.

PubMed

Chaplin, E; Bailey, M; Crosby, R; Gorman, D; Holland, X; Hippe, C; Hoff, T; Nawrocki, D; Pichette, S; Thota, N

1999-06-01

Health care has a number of historical barriers to capturing the voice of the customer and to incorporating customer wants into health care services, whether the customer is a patient, an insurer, or a community. Quality function deployment (QFD) is a set of tools and practices that can help overcome these barriers to form a process for the planning and design or redesign of products and services. The goal of the project was to increase referral volume and to improve a rehabilitation hospital's capacity to provide comprehensive medical and/or legal evaluations for people with complex and catastrophic injuries or illnesses. HIGH-LEVEL VIEW OF QFD AS A PROCESS: The steps in QFD are as follows: capture of the voice of the customer, quality deployment, functions deployment, failure mode deployment, new process deployment, and task deployment. The output of each step becomes the input to a matrix tool or table of the next step of the process. In 3 1/2 months a nine-person project team at Continental Rehabilitation Hospital (San Diego) used QFD tools to capture the voice of the customer, use these data as the basis for a questionnaire on important qualities of service from the customer's perspective, obtain competitive data on how the organization was perceived to be meeting the demanded qualities, identify measurable dimensions and targets of these qualities, and incorporate the functions and tasks into the delivery of service which are necessary to meet the demanded qualities. The future of providing health care services will belong to organizations that can adapt to a rapidly changing environment and to demands for new products and services that are produced and delivered in new ways.

Development of a knowledge-based system for the design of composite automotive components

NASA Astrophysics Data System (ADS)

Moynihan, Gary P.; Stephens, J. Paul

1997-01-01

Composite materials are comprised of two or more constituents possessing significantly different physical properties. Due to their high strength and light weight, there is an emerging trend to utilize composites in the automotive industry. There is an inherent link between component design and the manufacturing processes necessary for fabrication. To many designers, this situation may be intimidating, since there is frequently little available understanding of composites and their processes. A direct results is high rates of product scrap and rework. Thus, there is a need to implement a systematic approach to composite material design. One such approach is quality function deployment (QFD). By translating customer requirements into design parameters, through the use of heuristics, QFD supports the improvement of product quality during the planning stages prior to actual production. The purpose of this research is to automate the use of knowledge pertaining to the design and application of composite materials within the automobile industry. This is being accomplished through the development of a prototype expert system incorporating a QFD approach. It will provide industry designers with access to knowledge of composite materials that might not be otherwise available.

"The Actualized Neurosurgeon": A Proposed Model of Surgical Resident Development.

PubMed

Lipsman, Nir; Khan, Osaama; Kulkarni, Abhaya V

2017-03-01

Modern neurosurgical training is both physically and emotionally demanding, posing significant challenges, new and old, to residents as well as programs attempting to train safe, competent surgeons. Models to describe resident development, such as the Accreditation Council for Graduate Medical Education competencies and milestones, address the acquisition of specific skills but largely ignore the stresses and pressures unique to each stage of resident training. We propose an alternative model of resident development adapted from the developmental psychology literature. Our model identifies the challenges that must be met at each stage of junior, intermediate, and senior and chief residency, leading ultimately to an "actualized" neurosurgeon (i.e., one who has maximized his or her potential). Failure to overcome any 1 of these challenges can lead to specific long-lasting consequences, including regret, identity crisis, incompetence, and bitterness. In contrast, the actualized surgeon is one who has successfully acquired the virtues of hope, will, purpose, fidelity, productivity, leadership, competence, and wisdom. The actualized surgeon not only functions safely, confidently, and professionally, but also successfully navigates the challenges of residency and emerges from them having fulfilled his or her maximal potential. This developmental perspective provides an individualized description of healthy surgical development. Our model allows programs to identify the basis for residents who fail to progress, counsel residents during their training, and perhaps help identify resident candidates who are better prepared to meet the developmental challenges of residency training. Copyright © 2016 Elsevier Inc. All rights reserved.

Surgical PACS for the digital operating room. Systems engineering and specification of user requirements.

PubMed

Korb, Werner; Bohn, Stefan; Burgert, Oliver; Dietz, Andreas; Jacobs, Stephan; Falk, Volkmar; Meixensberger, Jürgen; Strauss, Gero; Trantakis, Christos; Lemke, Heinz U

2006-01-01

For better integration of surgical assist systems into the operating room, a common communication and processing plattform that is based on the users needs is needed. The development of such a system, a Surgical Picture Aquisition and Communication System (S-PACS), according the systems engineering cycle is oulined in this paper. The first two steps (concept and specification) for the engineering of the S-PACS are discussed.A method for the systematic integration of the users needs', the Quality Function Deployment (QFD), is presented. The properties of QFD for the underlying problem and first results are discussed. Finally, this leads to a first definition of an S-PACS system.

Proposal of custom made wrist orthoses based on 3D modelling and 3D printing.

PubMed

Abreu de Souza, Mauren; Schmitz, Cristiane; Marega Pinhel, Marcelo; Palma Setti, Joao A; Nohama, Percy

2017-07-01

Accessibility to three-dimensional (3D) technologies, such as 3D scanning systems and additive manufacturing (like 3D printers), allows a variety of 3D applications. For medical applications in particular, these modalities are gaining a lot of attention enabling several opportunities for healthcare applications. The literature brings several cases applying both technologies, but none of them focus on the spreading of how this technology could benefit the health segment. This paper proposes a new methodology, which employs both 3D modelling and 3D printing for building orthoses, which could better fit the demands of different patients. Additionally, there is an opportunity for sharing expertise, as it represents a trendy in terms of the maker-movement. Therefore, as a result of the proposed approach, we present a case study based on a volunteer who needs an immobilization orthosis, which was built for exemplification of the whole process. This proposal also employs freely available 3D models and software, having a strong social impact. As a result, it enables the implementation and effective usability for a variety of built to fit solutions, hitching useful and smarter technologies for the healthcare sector.

Proposed model for interaction between residents and residency training programs, and pharmaceutical industry.

PubMed

Razack, S; Arbour, L; Hutcheon, R

1999-03-01

Medical residents in training are as much targets of pharmaceutical-industry marketing as are physicians in practice. This interaction is often subtle and takes the form of sponsorship of meals at academic events, support for conference travel, books, and items such as pens and notepads. Most residency programs direct little time towards training in ethics and the critical analysis of pharmaceutical-industry marketing. We propose a model for the relationship between residents and residency programs, and the pharmaceutical industry that addresses the need for such interaction to be viewed in light of the patient-centered ethic of professional conduct and the ideal of unbiased medical practice. A committee of residents at different levels of training and two staff physicians received the mandate to examine this issue. The committee developed a set of guidelines and a proposed schema for the handling of funds from pharmaceutical companies (still not implemented). Each residency program would develop a common fund for money donated by pharmaceutical companies. This fund would be administered by a committee with defined priorities. The presence of residents on this committee under staff preceptorship would serve as a springboard for education on the subject. Guidelines for acknowledgement of sponsorship, solicitation of funds, gifts for care of patients, ongoing education, and the wider applicability of these proposals were also developed. Residents' interaction with the pharmaceutical industry during training could have lifelong influence on medical practice. We hope that our model will promote critical appraisal of the potential risks and benefits of this interaction.

A self-report measure for the ICD-11 dimensional trait model proposal: The personality inventory for ICD-11.

PubMed

Oltmanns, Joshua R; Widiger, Thomas A

2018-02-01

Proposed for the 11th edition of the World Health Organization's International Classification of Diseases (ICD-11) is a dimensional trait model for the classification of personality disorder (Tyrer, Reed, & Crawford, 2015). The ICD-11 proposal consists of 5 broad domains: negative affective, detachment, dissocial, disinhibition, and anankastic (Mulder, Horwood, Tyrer, Carter, & Joyce, 2016). Several field trials have examined this proposal, yet none has included a direct measure of the trait model. The purpose of the current study was to develop and provide initial validation for the Personality Inventory for ICD-11 (PiCD), a self-report measure of this proposed 5-domain maladaptive trait model. Item selection and scale construction proceeded through 3 initial data collections assessing potential item performance. Two subsequent studies were conducted for scale validation. In Study 1, the PiCD was evaluated in a sample of 259 MTurk participants (who were or had been receiving mental health treatment) with respect to 2 measures of general personality structure: The Eysenck Personality Questionnaire-Revised and the 5-Dimensional Personality Test. In Study 2, the PiCD was evaluated in an additional sample of 285 participants with respect to 2 measures of maladaptive personality traits: The Personality Inventory for DSM-5 and the Computerized Adaptive Test for Personality Disorders. Study 3 provides an item-level exploratory structural equation model with the combined samples from Studies 1 and 2. The results are discussed with respect to the validity of the measure and the potential benefits for future research in having a direct, self-report measure of the ICD-11 trait proposal. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

A COST-EFFECTIVENESS MODEL FOR THE ANALYSIS OF TITLE I ESEA PROJECT PROPOSALS, PART I-VII.

ERIC Educational Resources Information Center

ABT, CLARK C.

SEVEN SEPARATE REPORTS DESCRIBE AN OVERVIEW OF A COST-EFFECTIVENESS MODEL AND FIVE SUBMODELS FOR EVALUATING THE EFFECTIVENESS OF ELEMENTARY AND SECONDARY ACT TITLE I PROPOSALS. THE DESIGN FOR THE MODEL ATTEMPTS A QUANTITATIVE DESCRIPTION OF EDUCATION SYSTEMS WHICH MAY BE PROGRAMED AS A COMPUTER SIMULATION TO INDICATE THE IMPACT OF A TITLE I…

APC-PC Combined Scheme in Gilbert Two State Model: Proposal and Study

NASA Astrophysics Data System (ADS)

Bulo, Yaka; Saring, Yang; Bhunia, Chandan Tilak

2017-04-01

In an automatic repeat request (ARQ) scheme, a packet is retransmitted if it gets corrupted due to transmission errors caused by the channel. However, an erroneous packet may contain both erroneous bits and correct bits and hence it may still contain useful information. The receiver may be able to combine this information from multiple erroneous copies to recover the correct packet. Packet combining (PC) is a simple and elegant scheme of error correction in transmitted packet, in which two received copies are XORed to obtain the bit location of erroneous bits. Thereafter, the packet is corrected by bit inversion of bit located as erroneous. Aggressive packet combining (APC) is a logic extension of PC primarily designed for wireless communication with objective of correcting error with low latency. PC offers higher throughput than APC, but PC does not correct double bit errors if occur in same bit location of erroneous copies of the packet. A hybrid technique is proposed to utilize the advantages of both APC and PC while attempting to remove the limitation of both. In the proposed technique, applications of APC-PC on Gilbert two state model has been studied. The simulation results show that the proposed technique offers better throughput than the conventional APC and lesser packet error rate than PC scheme.

A proposed model of psychodynamic psychotherapy linked to Erik Erikson's eight stages of psychosocial development.

PubMed

Knight, Zelda Gillian

2017-09-01

Just as Freud used stages of psychosexual development to ground his model of psychoanalysis, it is possible to do the same with Erik Erikson's stages of development with regards to a model of psychodynamic psychotherapy. This paper proposes an eight-stage model of psychodynamic psychotherapy linked to Erik Erikson's eight stages of psychosocial development. Various suggestions are offered. One such suggestion is that as each of Erikson's developmental stages is triggered by a crisis, in therapy it is triggered by the client's search. The resolution of the search often leads to the development of another search, which implies that the therapy process comprises a series of searches. This idea of a series of searches and resolutions leads to the understanding that identity is developmental and therapy is a space in which a new sense of identity may emerge. The notion of hope is linked to Erikson's stage of Basic Trust and the proposed model of therapy views hope and trust as essential for the therapy process. Two clinical vignettes are offered to illustrate these ideas. Psychotherapy can be approached as an eight-stage process and linked to Erikson's eight stages model of development. Psychotherapy may be viewed as a series of searches and thus as a developmental stage resolution process, which leads to the understanding that identity is ongoing throughout the life span. Copyright © 2017 John Wiley & Sons, Ltd.

Assisted-living spaces for end-users with complex needs: a proposed implementation and delivery model.

PubMed

Linskell, Jeremy; Bouamrane, Matt-Mouley

2012-09-01

An assisted living space (ALS) is a technology-enabled environment designed to allow people with complex health or social care needs to remain, and live independently, in their own home for longer. However, many challenges remain in order to deliver usable systems acceptable to a diverse range of stakeholders, including end-users, and their families and carers, as well as health and social care services. ALSs need to support activities of daily-living while allowing end-users to maintain important social connections. They must be dynamic, flexible and adaptable living environments. In this article, we provide an overview of the technological landscape of assisted-living technology (ALT) and recent policies to promote an increased adoption of ALT in Scotland. We discuss our experiences in implementing technology-supported ALSs and emphasise key lessons. Finally, we propose an iterative and pragmatic user-centred implementation model for delivering ALSs in complex-needs scenarios. This empirical model is derived from our past ALS implementations. The proposed model allows project stakeholders to identify requirements, allocate tasks and responsibilities, and identify appropriate technological solutions for the delivery of functional ALS systems. The model is generic and makes no assumptions on needs or technology solutions, nor on the technical knowledge, skills and experience of the stakeholders involved in the ALS design process.

Conceptual model of iCAL4LA: Proposing the components using comparative analysis

NASA Astrophysics Data System (ADS)

Ahmad, Siti Zulaiha; Mutalib, Ariffin Abdul

2016-08-01

This paper discusses an on-going study that initiates an initial process in determining the common components for a conceptual model of interactive computer-assisted learning that is specifically designed for low achieving children. This group of children needs a specific learning support that can be used as an alternative learning material in their learning environment. In order to develop the conceptual model, this study extracts the common components from 15 strongly justified computer assisted learning studies. A comparative analysis has been conducted to determine the most appropriate components by using a set of specific indication classification to prioritize the applicability. The results of the extraction process reveal 17 common components for consideration. Later, based on scientific justifications, 16 of them were selected as the proposed components for the model.

Effective Solar Indices for Ionospheric Modeling: A Review and a Proposal for a Real-Time Regional IRI

NASA Astrophysics Data System (ADS)

Pignalberi, A.; Pezzopane, M.; Rizzi, R.; Galkin, I.

2018-01-01

The first part of this paper reviews methods using effective solar indices to update a background ionospheric model focusing on those employing the Kriging method to perform the spatial interpolation. Then, it proposes a method to update the International Reference Ionosphere (IRI) model through the assimilation of data collected by a European ionosonde network. The method, called International Reference Ionosphere UPdate (IRI UP), that can potentially operate in real time, is mathematically described and validated for the period 9-25 March 2015 (a time window including the well-known St. Patrick storm occurred on 17 March), using IRI and IRI Real Time Assimilative Model (IRTAM) models as the reference. It relies on foF2 and M(3000)F2 ionospheric characteristics, recorded routinely by a network of 12 European ionosonde stations, which are used to calculate for each station effective values of IRI indices IG_{12} and R_{12} (identified as IG_{{12{eff}}} and R_{{12{eff}}}); then, starting from this discrete dataset of values, two-dimensional (2D) maps of IG_{{12{eff}}} and R_{{12{eff}}} are generated through the universal Kriging method. Five variogram models are proposed and tested statistically to select the best performer for each effective index. Then, computed maps of IG_{{12{eff}}} and R_{{12{eff}}} are used in the IRI model to synthesize updated values of foF2 and hmF2. To evaluate the ability of the proposed method to reproduce rapid local changes that are common under disturbed conditions, quality metrics are calculated for two test stations whose measurements were not assimilated in IRI UP, Fairford (51.7°N, 1.5°W) and San Vito (40.6°N, 17.8°E), for IRI, IRI UP, and IRTAM models. The proposed method turns out to be very effective under highly disturbed conditions, with significant improvements of the foF2 representation and noticeable improvements of the hmF2 one. Important improvements have been verified also for quiet and moderately disturbed

Innovative Product Design Based on Comprehensive Customer Requirements of Different Cognitive Levels

PubMed Central

Zhao, Wu; Zheng, Yake; Wang, Rui; Wang, Chen

2014-01-01

To improve customer satisfaction in innovative product design, a topology structure of customer requirements is established and an innovative product approach is proposed. The topology structure provides designers with reasonable guidance to capture the customer requirements comprehensively. With the aid of analytic hierarchy process (AHP), the importance of the customer requirements is evaluated. Quality function deployment (QFD) is used to translate customer requirements into product and process design demands and pick out the technical requirements which need urgent improvement. In this way, the product is developed in a more targeted way to satisfy the customers. the theory of innovative problems solving (TRIZ) is used to help designers to produce innovative solutions. Finally, a case study of automobile steering system is used to illustrate the application of the proposed approach. PMID:25013862

Innovative product design based on comprehensive customer requirements of different cognitive levels.

PubMed

Li, Xiaolong; Zhao, Wu; Zheng, Yake; Wang, Rui; Wang, Chen

2014-01-01

To improve customer satisfaction in innovative product design, a topology structure of customer requirements is established and an innovative product approach is proposed. The topology structure provides designers with reasonable guidance to capture the customer requirements comprehensively. With the aid of analytic hierarchy process (AHP), the importance of the customer requirements is evaluated. Quality function deployment (QFD) is used to translate customer requirements into product and process design demands and pick out the technical requirements which need urgent improvement. In this way, the product is developed in a more targeted way to satisfy the customers. the theory of innovative problems solving (TRIZ) is used to help designers to produce innovative solutions. Finally, a case study of automobile steering system is used to illustrate the application of the proposed approach.

Substance use disorders in schizophrenia: review, integration, and a proposed model.

PubMed

Blanchard, J J; Brown, S A; Horan, W P; Sherwood, A R

2000-03-01

Substance use disorders occur in approximately 40 to 50% of individuals with schizophrenia. Clinically, substance use disorders are associated with a variety of negative outcomes in schizophrenia, including incarceration, homelessness, violence, and suicide. An understanding of the reasons for such high rates of substance use disorders may yield insights into the treatment of this comorbidity in schizophrenia. This review summarizes methodological and conceptual issues concerning the study of substance use disorders in schizophrenia and provides a review of the prevalence of this co-occurrence. Prevailing theories regarding the co-occurrence of schizophrenia and substance use disorders are reviewed. Little empirical support is found for models suggesting that schizophrenic symptoms lead to substance use (self-medication), that substance use leads to schizophrenia, or that there is a genetic relationship between schizophrenia and substance use. An integrative affect-regulation model incorporating individual differences in traits and responses to stress is proposed for future study.

Organizational intellectual capital and the role of the nurse manager: A proposed conceptual model.

PubMed

Gilbert, Jason H; Von Ah, Diane; Broome, Marion E

Nurse managers must leverage both the human capital and social capital of the teams they lead in order to produce quality outcomes. Little is known about the relationship between human capital and social capital and how these concepts may work together to produce organizational outcomes through leadership of nurses. The purpose of this article was to explore the concepts of human capital and social capital as they relate to nursing leadership in health care organizations. Specific aims included (a) to synthesize the literature related to human capital and social capital in leadership, (b) to refine the conceptual definitions of human capital and social capital with associated conceptual antecedents and consequences, and (c) to propose a synthesized conceptual model guiding further empirical research of social capital and human capital in nursing leadership. A systematic integrative review of leadership literature using criteria informed by Whittemore and Knafl (2005) was completed. CINAHL Plus with Full Text, Academic Search Premier, Business Source Premier, Health Business FullTEXT, MEDLINE, and PsychINFO databases were searched for the years 1995 to 2016 using terms "human capital," "social capital," and "management." Analysis of conceptual definitions, theoretical and conceptual models, antecedents and consequences, propositions or hypotheses, and empirical support for 37 articles fitting review criteria resulted in the synthesis of the proposed Gilbert Conceptual Model of Organizational Intellectual Capital. The Gilbert Conceptual Model of Organizational Intellectual Capital advances the propositions of human capital theory and social capital theory and is the first model to conceptualize the direct and moderating effects that nurse leaders have on the human capital and social capital of the teams they lead. This model provides a framework for further empirical study and may have implications for practice, organizational policy, and education related to nursing

Vaccination adherence: Review and proposed model.

PubMed

Abahussin, Asma A; Albarrak, Ahmed I

The prevalence of childhood vaccine-preventable diseases can be significantly reduced through adherence to confirmed vaccination schedules. However, many barriers to vaccination compliance exist, including a lack of awareness regarding the importance of vaccines, missing due dates, and fear of complications from vaccinations. The aim of this study is to review the existing tools and publications regarding vaccination adherence, and to propose a design for a vaccination adherence application (app) for smartphones. Android and iOS apps designed for vaccination reminders have been reviewed to examine six elements: educational factor; customizing features; reminder tools; peer education facilitations; feedback, and the language of apps' interface and content. The literature from PubMed has been reviewed for studies addressing reminder systems or tools including apps. The study has revealed insufficient (n=6) technology-based interventions for increasing childhood vaccination rates by reminding parents in comparison to the fast growth in technology, out of which are two publications discussed mobile apps. Ten apps have been found in apps stores; only one out of them was designed for the Saudi vaccination schedule in Arabic language with some weaknesses. The study proposed a design for a vaccination reminder app that includes a number of features in order to overcome the limitations discussed in the studied reminders, apps, and systems. The design supports the Arabic language and the Saudi vaccination schedule; parental education including peer education; a variety of reminder methods, and the capability to track vaccinations and refer to the app as a personal health record. The study discussed a design for a vaccination reminder app that satisfies the specific requirements for better compliance to children's immunization schedules based on reviewing the existing apps and publications. The proposed design includes element to educate parents and answer their concerns

A Proposed Resource Cost Model Grant-in-Aid System in Illinois: Equity Considerations and Other Observations.

ERIC Educational Resources Information Center

Hickrod, G. Alan; Chaudhari, Ramesh B.

This paper evaluates the equity dimensions of a grant-in-aid system based on the Resource Cost Model (RCM), as proposed by the Illinois State Board of Education. The first section is an independent evaluation of the conceptual and legal aspects of the RCM, focusing on both the weaknesses and the strengths of the model. In the second section, an…

PTSD's latent structure in Malaysian tsunami victims: assessing the newly proposed Dysphoric Arousal model.

PubMed

Armour, Cherie; Raudzah Ghazali, Siti; Elklit, Ask

2013-03-30

The underlying latent structure of Posttraumatic Stress Disorder (PTSD) is widely researched. However, despite a plethora of factor analytic studies, no single model has consistently been shown as superior to alternative models. The two most often supported models are the Emotional Numbing and the Dysphoria models. However, a recently proposed five-factor Dysphoric Arousal model has been gathering support over and above existing models. Data for the current study were gathered from Malaysian Tsunami survivors (N=250). Three competing models (Emotional Numbing/Dysphoria/Dysphoric Arousal) were specified and estimated using Confirmatory Factor Analysis (CFA). The Dysphoria model provided superior fit to the data compared to the Emotional Numbing model. However, using chi-square difference tests, the Dysphoric Arousal model showed a superior fit compared to both the Emotional Numbing and Dysphoria models. In conclusion, the current results suggest that the Dysphoric Arousal model better represents PTSD's latent structure and that items measuring sleeping difficulties, irritability/anger and concentration difficulties form a separate, unique PTSD factor. These results are discussed in relation to the role of Hyperarousal in PTSD's on-going symptom maintenance and in relation to the DSM-5. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

ONCHIT security in distributed environments: a proposed model for implantable devices.

PubMed

Lorence, Daniel; Lee, James; Richards, Michael

2010-08-01

Recent ONCHIT mandates call for increased individual health data collection efforts as well as heightened security measures. To date most healthcare organizations have been reluctant to exchange information, citing confidentiality concerns and unshared costs incurred by specific organizations. Implantable monitoring and treatment devices are rapidly emerging as data collection interface tools in response to such mandates. Proposed here is a translational, device-independent consumer-based solution, which focuses on information controlled by specific patients, and functions within a distributed (organization neutral) environment. While the conceptual applications employed in this technology set are provided by way of illustration, they may also serve as a transformative model for emerging EMR/EHR requirements.

Global model of zenith tropospheric delay proposed based on EOF analysis

NASA Astrophysics Data System (ADS)

Sun, Langlang; Chen, Peng; Wei, Erhu; Li, Qinzheng

2017-07-01

Tropospheric delay is one of the main error budgets in Global Navigation Satellite System (GNSS) measurements. Many empirical correction models have been developed to compensate this delay, and models which do not require meteorological parameters have received the most attention. This study established a global troposphere zenith total delay (ZTD) model, called Global Empirical Orthogonal Function Troposphere (GEOFT), based on the empirical orthogonal function (EOF, also known as geographically weighted PCAs) analysis method and the Global Geodetic Observing System (GGOS) Atmosphere data from 2012 to 2015. The results showed that ZTD variation could be well represented by the characteristics of the EOF base function Ek and associated coefficients Pk. Here, E1 mainly signifies the equatorial anomaly; E2 represents north-south asymmetry, and E3 and E4 reflects regional variation. Moreover, P1 mainly reflects annual and semiannual variation components; P2 and P3 mainly contains annual variation components, and P4 displays semiannual variation components. We validated the proposed GEOFT model using tropospheric delay data of GGOS ZTD grid data and the tropospheric product of the International GNSS Service (IGS) over the year 2016. The results showed that GEOFT model has high accuracy with bias and RMS of -0.3 and 3.9 cm, respectively, with respect to the GGOS ZTD data, and of -0.8 and 4.1 cm, respectively, with respect to the global IGS tropospheric product. The accuracy of GEOFT demonstrating that the use of the EOF analysis method to characterize ZTD variation is reasonable.

Advocating for School Psychologists in Response to the APA's Proposed "Model Act for State Licensure of Psychologists"

ERIC Educational Resources Information Center

Skalski, Anastasia Kalamaros

2009-01-01

On March 6, 2009, the APA Model Licensure Act Task Force released its second draft of the policy document known as the proposed "Model Act for State Licensure of Psychologists". This policy document serves as guidance to state legislatures for how they should set up their psychology licensing laws. The general expectations promoted in the model…

Respiratory chain inhibition: one more feature to propose MPTP intoxication as a Leigh syndrome model.

PubMed

Da Costa, Barbara; Dumon, Elodie; Le Moigno, Laurence; Bodard, Sylvie; Castelnau, Pierre; Letellier, Thierry; Rocher, Christophe

2016-10-01

1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) intoxicated mice have been widely used to model the loss of dopaminergic neurons. As this treatment leads to basal ganglia degeneration, it was proposed that MPTP mice could be used as a model of Leigh syndrome. However, this mitochondrial pathology is biochemically characterized by a respiratory chain dysfunction. To determine if MPTP can affect in vivo mitochondria function, we measured the activities of mitochondrial respiratory chain complexes in several tissues. Our results show that MPTP affects mainly mitochondrial respiratory chain complex IV, as found in Leigh Syndrome, confirming that acute MPTP intoxicated mice are a good model of Leigh Syndrome.

Proposed Model of the Neurobiological Mechanisms Underlying Psychosocial Alcohol Interventions: The Example of Motivational Interviewing*

PubMed Central

Feldstein Ewing, Sarah W.; Filbey, Francesca M.; Hendershot, Christian S.; McEachern, Amber D.; Hutchison, Kent E.

2011-01-01

Objective: Despite the prevalence and profound consequences of alcohol use disorders, psychosocial alcohol interventions have widely varying outcomes. The range of behavior following psychosocial alcohol treatment indicates the need to gain a better understanding of active ingredients and how they may operate. Although this is an area of great interest, at this time there is a limited understanding of how in-session behaviors may catalyze changes in the brain and subsequent alcohol use behavior. Thus, in this review, we aim to identify the neurobiological routes through which psychosocial alcohol interventions may lead to post-session behavior change as well as offer an approach to conceptualize and evaluate these translational relationships. Method: PubMed and PsycINFO searches identified studies that successfully integrated functional magnetic resonance imaging and psychosocial interventions. Results: Based on this research, we identified potential neurobiological substrates through which behavioral alcohol interventions may initiate and sustain behavior change. In addition, we proposed a testable model linking within-session active ingredients to outside-of-session behavior change. Conclusions: Through this review, we present a testable translational model. Additionally, we illustrate how the proposed model can help facilitate empirical evaluations of psychotherapeutic factors and their underlying neural mechanisms, both in the context of motivational interviewing and in the treatment of alcohol use disorders. PMID:22051204

A proposed adaptive step size perturbation and observation maximum power point tracking algorithm based on photovoltaic system modeling

NASA Astrophysics Data System (ADS)

Huang, Yu

Solar energy becomes one of the major alternative renewable energy options for its huge abundance and accessibility. Due to the intermittent nature, the high demand of Maximum Power Point Tracking (MPPT) techniques exists when a Photovoltaic (PV) system is used to extract energy from the sunlight. This thesis proposed an advanced Perturbation and Observation (P&O) algorithm aiming for relatively practical circumstances. Firstly, a practical PV system model is studied with determining the series and shunt resistances which are neglected in some research. Moreover, in this proposed algorithm, the duty ratio of a boost DC-DC converter is the object of the perturbation deploying input impedance conversion to achieve working voltage adjustment. Based on the control strategy, the adaptive duty ratio step size P&O algorithm is proposed with major modifications made for sharp insolation change as well as low insolation scenarios. Matlab/Simulink simulation for PV model, boost converter control strategy and various MPPT process is conducted step by step. The proposed adaptive P&O algorithm is validated by the simulation results and detail analysis of sharp insolation changes, low insolation condition and continuous insolation variation.

Air Quality Modeling Technical Support Document for the 2008 Ozone NAAQS Cross-State Air Pollution Rule Proposal

EPA Pesticide Factsheets

In this technical support document (TSD) we describe the air quality modeling performed to support the proposed Cross-State Air Pollution Rule for the 2008 ozone National Ambient Air Quality Standards (NAAQS)

General Model Study of Scour at Proposed Pier Extensions - Santa Ana River at BNSF Bridge, Corona, California

DTIC Science & Technology

2017-11-01

model of the bridge piers, other related structures, and the adjacent channel. Data from the model provided a qualitative and quantitative evaluation of...minus post-test lidar survey . ......................... 42 Figure 38. Test 1 (30,000 cfs existing conditions) pre- minus post-test lidar survey ...43 Figure 39. Test 7 (15,000 cfs original proposed conditions) pre- minus post-test lidar survey

PROPOSED CARCINOGENIC MECHANISMS FOR ARSENIC

EPA Science Inventory

PROPOSED CARCINOGENIC MECHANISMS FOR ARSENIC.

Arsenic is a human carcinogen in skin, lung, liver, urinary bladder and kidney. In contrast,
there is no accepted experimental animal model of inorganic arsenic carcinogenesis.
Proposed mechanisms/modes of action for a...

EPA and California Air Resources Board disapprove Volkswagen’s Proposed Emissions Modification for model year 2012 – 2014 manual transmission diesel Passat vehicles; VW intends to submit revised proposal

EPA Pesticide Factsheets

EPA and CARB approve an emissions modification proposed by Volkswagen (VW) to reduce nitrogen oxides emissions from model year 2009-2014, generation 1, 2.0 liter diesel Jetta, Golf, Beetle, and Audi A3 vehicles.

Phase II Study Proposal Briefs.

ERIC Educational Resources Information Center

National Center for the Study of Postsecondary Educational Supports, Honolulu, HI.

This document collects 23 study proposal briefs presented to the National Center for the Study of Postsecondary Educational Supports. The proposals address the following topics concerned with postsecondary services for students with disabilities: cultural empowerment, longitudinal analysis of postsecondary students' experience, effective models of…

Ultrasound-Guided Vascular Access Simulator for Medical Training: Proposal of a Simple, Economic and Effective Model.

PubMed

Fürst, Rafael Vilhena de Carvalho; Polimanti, Afonso César; Galego, Sidnei José; Bicudo, Maria Claudia; Montagna, Erik; Corrêa, João Antônio

2017-03-01

To present a simple and affordable model able to properly simulate an ultrasound-guided venous access. The simulation was made using a latex balloon tube filled with water and dye solution implanted in a thawed chicken breast with bones. The presented model allows the simulation of all implant stages of a central catheter. The obtained echogenicity is similar to that observed in human tissue, and the ultrasound identification of the tissues, balloon, needle, wire guide and catheter is feasible and reproducible. The proposed model is simple, economical, easy to manufacture and capable of realistically and effectively simulating an ultrasound-guided venous access.

Socio-economic vulnerability to natural hazards - proposal for an indicator-based model

NASA Astrophysics Data System (ADS)

Eidsvig, U.; McLean, A.; Vangelsten, B. V.; Kalsnes, B.; Ciurean, R. L.; Argyroudis, S.; Winter, M.; Corominas, J.; Mavrouli, O. C.; Fotopoulou, S.; Pitilakis, K.; Baills, A.; Malet, J. P.

2012-04-01

Vulnerability assessment, with respect to natural hazards, is a complex process that must consider multiple dimensions of vulnerability, including both physical and social factors. Physical vulnerability refers to conditions of physical assets, and may be modeled by the intensity and magnitude of the hazard, the degree of physical protection provided by the natural and built environment, and the physical robustness of the exposed elements. Social vulnerability refers to the underlying factors leading to the inability of people, organizations, and societies to withstand impacts from the natural hazards. Social vulnerability models can be used in combination with physical vulnerability models to estimate both direct losses, i.e. losses that occur during and immediately after the impact, as well as indirect losses, i.e. long-term effects of the event. Direct impact of a landslide typically includes casualties and damages to buildings and infrastructure while indirect losses may e.g. include business closures or limitations in public services. The direct losses are often assessed using physical vulnerability indicators (e.g. construction material, height of buildings), while indirect losses are mainly assessed using social indicators (e.g. economical resources, demographic conditions). Within the EC-FP7 SafeLand research project, an indicator-based method was proposed to assess relative socio-economic vulnerability to landslides. The indicators represent the underlying factors which influence a community's ability to prepare for, deal with, and recover from the damage associated with landslides. The proposed model includes indicators representing demographic, economic and social characteristics as well as indicators representing the degree of preparedness and recovery capacity. Although the model focuses primarily on the indirect losses, it could easily be extended to include more physical indicators which account for the direct losses. Each indicator is individually

The Armed Services and Model Employer Status for Child Support Enforcement: A Proposal to Improve Service of Process

DTIC Science & Technology

1996-04-01

CHILD SUPPORT ENFORCEMENT: A PROPOSAL TO IMPROVE SERVICE OF PROCESS A Thesis Presented to The Judge Advocate General’s School United States Army The...19960 THE ARMED SERVICES AND MODEL EMPLOYER STATUS FOR CHILD SUPPORT ENFORCEMENT: A PROPOSAL TO IMPROVE SERVICE OF PROCESS by Major Alan L. Cook...ABSTRACT: On February 27, 1995, President Clinton issued Executive Order 12953, "Actions Required of all Executive Agencies to Facilitate Payment of Child

Common-Cause Failure Treatment in Event Assessment: Basis for a Proposed New Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dana Kelly; Song-Hua Shen; Gary DeMoss

2010-06-01

Event assessment is an application of probabilistic risk assessment in which observed equipment failures and outages are mapped into the risk model to obtain a numerical estimate of the event’s risk significance. In this paper, we focus on retrospective assessments to estimate the risk significance of degraded conditions such as equipment failure accompanied by a deficiency in a process such as maintenance practices. In modeling such events, the basic events in the risk model that are associated with observed failures and other off-normal situations are typically configured to be failed, while those associated with observed successes and unchallenged components aremore » assumed capable of failing, typically with their baseline probabilities. This is referred to as the failure memory approach to event assessment. The conditioning of common-cause failure probabilities for the common cause component group associated with the observed component failure is particularly important, as it is insufficient to simply leave these probabilities at their baseline values, and doing so may result in a significant underestimate of risk significance for the event. Past work in this area has focused on the mathematics of the adjustment. In this paper, we review the Basic Parameter Model for common-cause failure, which underlies most current risk modelling, discuss the limitations of this model with respect to event assessment, and introduce a proposed new framework for common-cause failure, which uses a Bayesian network to model underlying causes of failure, and which has the potential to overcome the limitations of the Basic Parameter Model with respect to event assessment.« less

Evaluating the impact a proposed family planning model would have on maternal and infant mortality in Afghanistan.

PubMed

Rahmani, Ahmad Masoud; Wade, Benjamin; Riley, William

2015-01-01

This study aimed to assess the potential impact a proposed family planning model would have on reducing maternal and infant mortality in Afghanistan. Afghanistan has a high total fertility rate, high infant mortality rate, and high maternal mortality rate. Afghanistan also has tremendous socio-cultural barriers to and misconceptions about family planning services. We applied predictive statistical models to a proposed family planning model for Afghanistan to better understand the impact increased family planning can have on Afghanistan's maternal mortality rate and infant mortality rate. We further developed a sensitivity analysis that illustrates the number of maternal and infant deaths that can be averted over 5 years according to different increases in contraceptive prevalence rates. Incrementally increasing contraceptive prevalence rates in Afghanistan from 10% to 60% over the course of 5 years could prevent 11,653 maternal deaths and 317,084 infant deaths, a total of 328,737 maternal and infant deaths averted. Achieving goals in reducing maternal and infant mortality rates in Afghanistan requires a culturally relevant approach to family planning that will be supported by the population. The family planning model for Afghanistan presents such a solution and holds the potential to prevent hundreds of thousands of deaths. Copyright © 2013 John Wiley & Sons, Ltd.

Sorption testing and generalized composite surface complexation models for determining uranium sorption parameters at a proposed in-situ recovery site

DOE PAGES

Johnson, Raymond H.; Truax, Ryan A.; Lankford, David A.; ...

2016-02-03

Solid-phase iron concentrations and generalized composite surface complexation models were used to evaluate procedures in determining uranium sorption on oxidized aquifer material at a proposed U in situ recovery (ISR) site. At the proposed Dewey Burdock ISR site in South Dakota, USA, oxidized aquifer material occurs downgradient of the U ore zones. Solid-phase Fe concentrations did not explain our batch sorption test results,though total extracted Fe appeared to be positively correlated with overall measured U sorption. Batch sorption test results were used to develop generalized composite surface complexation models that incorporated the full genericsorption potential of each sample, without detailedmore » mineralogiccharacterization. The resultant models provide U sorption parameters (site densities and equilibrium constants) for reactive transport modeling. The generalized composite surface complexation sorption models were calibrated to batch sorption data from three oxidized core samples using inverse modeling, and gave larger sorption parameters than just U sorption on the measured solidphase Fe. These larger sorption parameters can significantly influence reactive transport modeling, potentially increasing U attenuation. Because of the limited number of calibration points, inverse modeling required the reduction of estimated parameters by fixing two parameters. The best-fit models used fixed values for equilibrium constants, with the sorption site densities being estimated by the inversion process. While these inverse routines did provide best-fit sorption parameters, local minima and correlated parameters might require further evaluation. Despite our limited number of proxy samples, the procedures presented provide a valuable methodology to consider for sites where metal sorption parameters are required. Furthermore, these sorption parameters can be used in reactive transport modeling to assess downgradient metal attenuation, especially when no other

Sorption testing and generalized composite surface complexation models for determining uranium sorption parameters at a proposed in-situ recovery site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Raymond H.; Truax, Ryan A.; Lankford, David A.

Solid-phase iron concentrations and generalized composite surface complexation models were used to evaluate procedures in determining uranium sorption on oxidized aquifer material at a proposed U in situ recovery (ISR) site. At the proposed Dewey Burdock ISR site in South Dakota, USA, oxidized aquifer material occurs downgradient of the U ore zones. Solid-phase Fe concentrations did not explain our batch sorption test results,though total extracted Fe appeared to be positively correlated with overall measured U sorption. Batch sorption test results were used to develop generalized composite surface complexation models that incorporated the full genericsorption potential of each sample, without detailedmore » mineralogiccharacterization. The resultant models provide U sorption parameters (site densities and equilibrium constants) for reactive transport modeling. The generalized composite surface complexation sorption models were calibrated to batch sorption data from three oxidized core samples using inverse modeling, and gave larger sorption parameters than just U sorption on the measured solidphase Fe. These larger sorption parameters can significantly influence reactive transport modeling, potentially increasing U attenuation. Because of the limited number of calibration points, inverse modeling required the reduction of estimated parameters by fixing two parameters. The best-fit models used fixed values for equilibrium constants, with the sorption site densities being estimated by the inversion process. While these inverse routines did provide best-fit sorption parameters, local minima and correlated parameters might require further evaluation. Despite our limited number of proxy samples, the procedures presented provide a valuable methodology to consider for sites where metal sorption parameters are required. Furthermore, these sorption parameters can be used in reactive transport modeling to assess downgradient metal attenuation, especially when no other

A proposed model for infant and child oral health promotion in India.

PubMed

Jawdekar, Ashwin Muralidhar

2013-01-01

Dental caries is an increasing burden in the developing countries. A proper budgetary allocation for treating dental diseases in an enormous population such as India is impractical, where resources are inadequate for major health challenges such as malnutrition and gastrointestinal and respiratory infections in children. An integrated, directed population approach targeting children is much needed. The existing machinery of successful public health campaigns such as the "Pulse Polio" and the "Mid-Day-Meals Scheme" of the Government of India can be used for oral health promotion for children. India has about 300 dental colleges and countrywide branches of the Indian Dental Association that can provide manpower for the program. An innovative, large-scale "Fit for School" program in Philippines is a model for an integrated approach for children's health and has proved to be cost-effective and viable. A model for oral health promotion in infants and children of India, combining age-specific initiatives for health education, nutrition, hygiene, and fluoride use, is proposed. The model could be implemented to evaluate the oral health status of children, knowledge and knowledge gain of the community health workers, and acceptability and sustainability of the preventive programs (fluoride varnish and preschool and school tooth brushing) pragmatically.

Citygml and the Streets of New York - a Proposal for Detailed Street Space Modelling

NASA Astrophysics Data System (ADS)

Beil, C.; Kolbe, T. H.

2017-10-01

Three-dimensional semantic city models are increasingly used for the analysis of large urban areas. Until now the focus has mostly been on buildings. Nonetheless many applications could also benefit from detailed models of public street space for further analysis. However, there are only few guidelines for representing roads within city models. Therefore, related standards dealing with street modelling are examined and discussed. Nearly all street representations are based on linear abstractions. However, there are many use cases that require or would benefit from the detailed geometrical and semantic representation of street space. A variety of potential applications for detailed street space models are presented. Subsequently, based on related standards as well as on user requirements, a concept for a CityGML-compliant representation of street space in multiple levels of detail is developed. In the course of this process, the CityGML Transportation model of the currently valid OGC standard CityGML2.0 is examined to discover possibilities for further developments. Moreover, a number of improvements are presented. Finally, based on open data sources, the proposed concept is implemented within a semantic 3D city model of New York City generating a detailed 3D street space model for the entire city. As a result, 11 thematic classes, such as roadbeds, sidewalks or traffic islands are generated and enriched with a large number of thematic attributes.

A Proposed Model for Assessing Defendant Competence to Self-Represent.

PubMed

White, Mitzi M S; Gutheil, Thomas G

2016-12-01

The increasing number of criminal defendants who are choosing to self-represent poses special challenges for legal systems with regard to the types of limits that should be placed on a defendant's basic human right to defend himself without the assistance of counsel. While courts strive to respect the dignity and autonomy of the defendant that are encompassed in this right, they also want to ensure that justice is delivered and the dignity of the courtroom is maintained. The Supreme Court of the United States, in its opinion in Indiana v. Edwards (2008), held that while the right to self-represent recognized in Faretta v. California (1975) remains, states and trial judges can place limits on a defendant's right to self-representation when a defendant lacks the mental capacities needed to prepare and conduct an adequate defense. Following the court's lead, we first examine the types and range of tasks that a defendant who chooses to self-represent must perform. Based on this analysis, we propose a five-part model that forensic practitioners can use as a conceptual framework for assessing whether a defendant has deficits that would affect his competence to perform critical self-representation tasks. The five areas that the model recommends practitioners assess are whether a defendant can engage in goal-directed behaviors, has sufficient communication skills, can engage in constructive social intercourse, can control his emotions in an adversarial arena, and has the cognitive abilities needed to argue his case adequately. It is recommended that practitioners use the model in their testimony to provide the trier of fact with a comprehensive report of the areas in which a defendant has deficits that will prevent him from protecting his interests in receiving a fair and equitable trial. © 2016 American Academy of Psychiatry and the Law.

A proposed physical model for the impregnated tungsten cathode based on Auger surface studies of the Ba-O-W system

NASA Technical Reports Server (NTRS)

Forman, R.

1979-01-01

Auger spectra and work function measurements are used to study the surface reactions between tungsten surface and adsorbed layers of barium, and barium and oxygen. The barium on an impregnated tungsten cathod seems to be an intermediate state, probably a coadsorbed barium-oxygen layer on tungsten. A slightly revised version of the previously suggested (1976) impregnated tungsten cathode model is proposed. This revised model assumes that the cathode surface during life has an adsorbed surface layer of a monolayer or less of both barium and oxygen on the surface. At end of life, steep drop in electron emission and resultant cathode failure occur. Recent NASA life test results on TWT type tubes are reported and explained by the proposed model.

Government Projects and Teaching the Technical Proposal.

ERIC Educational Resources Information Center

Butler, Douglas R.

1987-01-01

Describes a technical proposal writing assignment modeled after the conditions in industry. Provides a paradigm of government project proposals and then outlines the stages of the assignment that allow student to rework and revise, thereby discouraging students from writing formulaic and superficial proposals. (SRT)

A proposed model of factors influencing hydrogen fuel cell vehicle acceptance

NASA Astrophysics Data System (ADS)

Imanina, N. H. Noor; Kwe Lu, Tan; Fadhilah, A. R.

2016-03-01

Issues such as environmental problem and energy insecurity keep worsening as a result of energy use from household to huge industries including automotive industry. Recently, a new type of zero emission vehicle, hydrogen fuel cell vehicle (HFCV) has received attention. Although there are argues on the feasibility of hydrogen as the future fuel, there is another important issue, which is the acceptance of HFCV. The study of technology acceptance in the early stage is a vital key for a successful introduction and penetration of a technology. This paper proposes a model of factors influencing green vehicle acceptance, specifically HFCV. This model is built base on two technology acceptance theories and other empirical studies of vehicle acceptance. It aims to provide a base for finding the key factors influencing new sustainable energy fuelled vehicle, HFCV acceptance which is achieved by explaining intention to accept HFCV. Intention is influenced by attitude, subjective norm and perceived behavioural control from Theory of Planned Behaviour and personal norm from Norm Activation Theory. In the framework, attitude is influenced by perceptions of benefits and risks, and social trust. Perceived behavioural control is influenced by government interventions. Personal norm is influenced by outcome efficacy and problem awareness.

Modeling oscillatory dynamics in brain microcircuits as a way to help uncover neurological disease mechanisms: A proposal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Skinner, F. K.; Department of Medicine; Department of Physiology, University of Toronto Medical Sciences Building, 3rd Floor, 1 King's College Circle, Toronto, Ontario M5S 1A8

There is an undisputed need and requirement for theoretical and computational studies in Neuroscience today. Furthermore, it is clear that oscillatory dynamical output from brain networks is representative of various behavioural states, and it is becoming clear that one could consider these outputs as measures of normal and pathological brain states. Although mathematical modeling of oscillatory dynamics in the context of neurological disease exists, it is a highly challenging endeavour because of the many levels of organization in the nervous system. This challenge is coupled with the increasing knowledge of cellular specificity and network dysfunction that is associated with disease.more » Recently, whole hippocampus in vitro preparations from control animals have been shown to spontaneously express oscillatory activities. In addition, when using preparations derived from animal models of disease, these activities show particular alterations. These preparations present an opportunity to address challenges involved with using models to gain insight because of easier access to simultaneous cellular and network measurements, and pharmacological modulations. We propose that by developing and using models with direct links to experiment at multiple levels, which at least include cellular and microcircuit, a cycling can be set up and used to help us determine critical mechanisms underlying neurological disease. We illustrate our proposal using our previously developed inhibitory network models in the context of these whole hippocampus preparations and show the importance of having direct links at multiple levels.« less

Ecological planning proposal for Kruger National Park

NASA Astrophysics Data System (ADS)

van Riet, W. F.; Cooks, J.

1990-05-01

This article discusses an application of the ecological planning model proposed by Van Riet and Cooks. The various steps outlined in this model have been applied to Kruger National Park in South Africa. The natural features of Kruger National Park, which form the basis of such an ecological planning exercise and from which the various land use categories, values, and zoning classes can be determined, are discussed in detail. The suitability of each of the various features is analyzed and a final zoning proposal for Kruger National Park is suggested. Furthermore a method for selecting a site for a new camp is illustrated by referring to the site for the new Mopane rest camp which is now under construction in the Kruger National Park. The conclusion is reached that the proposed ecological planning model can be used successfully in planning conservation areas such as Kruger National Park and for the selection of the most desirable sites for the establishment of new rest camps. Its suitability as a practical model in such planning exercises is proven by the fact that the siting proposals of two new camps based on this model have been accepted by the National Parks Board, the controlling body of Kruger National Park.

A proposed-standard format to represent and distribute tomographic models and other earth spatial data

NASA Astrophysics Data System (ADS)

Postpischl, L.; Morelli, A.; Danecek, P.

2009-04-01

Formats used to represent (and distribute) tomographic earth models differ considerably and are rarely self-consistent. In fact, each earth scientist, or research group, uses specific conventions to encode the various parameterizations used to describe, e.g., seismic wave speed or density in three dimensions, and complete information is often found in related documents or publications (if available at all) only. As a consequence, use of various tomographic models from different authors requires considerable effort, is more cumbersome than it should be and prevents widespread exchange and circulation within the community. We propose a format, based on modern web standards, able to represent different (grid-based) model parameterizations within the same simple text-based environment, easy to write, to parse, and to visualise. The aim is the creation of self-describing data-structures, both human and machine readable, that are automatically recognised by general-purpose software agents, and easily imported in the scientific programming environment. We think that the adoption of such a representation as a standard for the exchange and distribution of earth models can greatly ease their usage and enhance their circulation, both among fellow seismologists and among a broader non-specialist community. The proposed solution uses semantic web technologies, fully fitting the current trends in data accessibility. It is based on Json (JavaScript Object Notation), a plain-text, human-readable lightweight computer data interchange format, which adopts a hierarchical name-value model for representing simple data structures and associative arrays (called objects). Our implementation allows integration of large datasets with metadata (authors, affiliations, bibliographic references, units of measure etc.) into a single resource. It is equally suited to represent other geo-referenced volumetric quantities — beyond tomographic models — as well as (structured and unstructured

Proposal for a Spatial Organization Model in Soil Science (The Example of the European Communities Soil Map).

ERIC Educational Resources Information Center

King, D.; And Others

1994-01-01

Discusses the computational problems of automating paper-based spatial information. A new relational structure for soil science information based on the main conceptual concepts used during conventional cartographic work is proposed. This model is a computerized framework for coherent description of the geographical variability of soils, combined…

Proposal of diagnostic process model for computer based diagnosis.

PubMed

Matsumura, Yasushi; Takeda, Toshihiro; Manabe, Shiro; Saito, Hirokazu; Teramoto, Kei; Kuwata, Shigeki; Mihara, Naoki

2012-01-01

We aim at making a diagnosis support system that can be put to practical use. We proposed a diagnostic process model based on simple knowledge which can be gleaned from textbooks. We defined clinical finding (CF) as a general concept for patient's symptom or findings etc., whose value is expressed by Boolean. We call the combination of several CFs a "CF pattern", and a set of CF patterns with concomitant diseases "case base". We consider diagnosis as a process of searching an instance from the case base whose CF pattern is concomitant with that of a patient. The diseases which have the same CF pattern are candidates for diagnosis. Then we select a CF which is present in part of the candidates and check whether it is present or absent in the patient in order to narrow down the candidates. Because the case base does not exist in reality, the probability of CF pattern is calculated by the product of CF occurrence rate assuming that occurrence of CF is independent. Therefore the knowledge required for diagnosis is frequency of disease under sex and age group and CF-disease relation (CF and its occurrence rate in the disease). By processing these two types of knowledge, diagnosis can be made.

Sustainable and tenable renal health model: a Latin American proposal of classification, programming, and evaluation.

PubMed

Calderón, Rafael Burgos; Depine, Santos

2005-08-01

End-stage renal disease (ESRD) presents a major problem to public health, with complex implications for social and economic structures in every nation of the world. Clearly, Latin American and Caribbean countries are not able to meet the needs of every patient requiring dialysis treatment at ESRD. Consequently, a considerable number of patients die every year as a result of lack of resources. Aware of this serious social, ethical, and economic problem, the Latin American Society of Nephrology and Hypertension proposed a new renal health concept in the region. In December 2002, at the workshop in Valdivia, Chile, a modification to the National Kidney Foundation Classification of Chronic Kidney Disease was approved. According to modifications to the concept of chronic kidney disease approved in the Declaration of Valdivia, a new Renal Health Model was proposed. It consists of including orderly follow-up in patients' charts, starting from the earliest stage, and a model establishing a guideline for the reallocation of financial resources to guarantee continuity of treatment to patients with ESRD. The implementation of the Renal Health Program in health ministries of Latin American and Caribbean countries would allow for a substantial improvement in renal health prevention and management, as a result of better distribution of financial and human resources.

A proposed defect tracking model for classifying the inserted defect reports to enhance software quality control.

PubMed

Sultan, Torky; Khedr, Ayman E; Sayed, Mostafa

2013-01-01

NONE DECLARED Defect tracking systems play an important role in the software development organizations as they can store historical information about defects. There are many research in defect tracking models and systems to enhance their capabilities to be more specifically tracking, and were adopted with new technology. Furthermore, there are different studies in classifying bugs in a step by step method to have clear perception and applicable method in detecting such bugs. This paper shows a new proposed defect tracking model for the purpose of classifying the inserted defects reports in a step by step method for more enhancement of the software quality.

The Development Of An Independent Locking Securement System For Mobility Aids In Public Transportation Vehicles: Volume 2

DOT National Transportation Integrated Search

1992-12-01

The Quality Functional Deployment (QFD) method was used for the design of the Independent Locking Securement (ILS) System, developed by the Oregon State University. The project entailed the design, construction, and testing of the ILS system prototyp...

Two-Dimensional Hydrodynamic Modeling and Analysis of the Proposed Channel Modifications and Grade Control Structure on the Blue River near Byram's Ford Industrial Park, Kansas City, Missouri

USGS Publications Warehouse

Huizinga, Richard J.

2007-01-01

The Blue River Channel Modification project being implemented by the U.S. Army Corps of Engineers (USACE) is intended to provide flood protection within the Blue River valley in the Kansas City, Mo., metropolitan area. In the latest phase of the project, concerns have arisen about preserving the Civil War historic area of Byram's Ford and the associated Big Blue Battlefield while providing flood protection for the Byram's Ford Industrial Park. In 1996, the USACE used a physical model built at the Waterways Experiment Station (WES) in Vicksburg, Miss., to examine the feasibility of a proposed grade control structure (GCS) that would be placed downstream from the historic river crossing of Byram's Ford to provide a subtle transition of flow from the natural channel to the modified channel. The U.S. Geological Survey (USGS), in cooperation with the USACE, modified an existing two-dimensional finite element surface-water model of the river between 63d Street and Blue Parkway (the 'original model'), used the modified model to simulate the existing (as of 2006) unimproved channel and the proposed channel modifications and GCS, and analyzed the results from the simulations and those from the WES physical model. Modifications were made to the original model to create a model that represents existing (2006) conditions between the north end of Swope Park immediately upstream from 63d Street and the upstream limit of channel improvement on the Blue River (the 'model of existing conditions'). The model of existing conditions was calibrated to two measured floods. The model of existing conditions also was modified to create a model that represents conditions along the same reach of the Blue River with proposed channel modifications and the proposed GCS (the 'model of proposed conditions'). The models of existing conditions and proposed conditions were used to simulate the 30-, 50-, and 100-year recurrence floods. The discharge from the calibration flood of May 15, 1990, also

A Proposed Model for Protein Crystal Nucleation and Growth

NASA Technical Reports Server (NTRS)

Pusey, Marc; Curreri, Peter A. (Technical Monitor)

2002-01-01

How does one take a molecule, strongly asymmetric in both shape and charge distribution, and assemble it into a crystal? We propose a model for the nucleation and crystal growth process for tetragonal lysozyme, based upon fluorescence, light, neutron, and X-ray scattering data, size exclusion chromatography experiments, dialysis kinetics, AFM, and modeling of growth rate data, from this and other laboratories. The first species formed is postulated to be a 'head to side' dimer. Through repeating associations involving the same intermolecular interactions this grows to a 4(sub 3) helix structure, that in turn serves as the basic unit for nucleation and subsequent crystal growth. High salt attenuates surface charges while promoting hydrophobic interactions. Symmetry facilitates subsequent helix-helix self-association. Assembly stability is enhanced when a four helix structure is obtained, with each bound to two neighbors. Only two unique interactions are required. The first are those for helix formation, where the dominant interaction is the intermolecular bridging anion. The second is the anti-parallel side-by-side helix-helix interaction, guided by alternating pairs of symmetry related salt bridges along each side. At this stage all eight unique positions of the P4(sub3)2(sub 1),2(sub 1) unit cell are filled. The process is one of a) attenuating the most strongly interacting groups, such that b) the molecules begin to self-associate in defined patterns, so that c) symmetry is obtained, which d) propagates as a growing crystal. Simple and conceptually obvious in hindsight, this tells much about what we are empirically doing when we crystallize macromolecules. By adjusting the growth parameters we are empirically balancing the intermolecular interactions, preferentially attenuating the dominant strong (for lysozyme the charged groups) while strengthening the lesser strong (hydrophobic) interactions. In the general case for proteins the lack of a singularly defined

Integrated Multiregional Analysis Proposing a New Model of Colorectal Cancer Evolution

PubMed Central

Niida, Atsushi; Shimamura, Teppei; Hirata, Hidenari; Sugimachi, Keishi; Sawada, Genta; Iwaya, Takeshi; Kurashige, Junji; Shinden, Yoshiaki; Iguchi, Tomohiro; Eguchi, Hidetoshi; Chiba, Kenichi; Shiraishi, Yuichi; Nagae, Genta; Yoshida, Kenichi; Nagata, Yasunobu; Haeno, Hiroshi; Yamamoto, Hirofumi; Ishii, Hideshi; Doki, Yuichiro; Iinuma, Hisae; Sasaki, Shin; Nagayama, Satoshi; Yamada, Kazutaka; Yachida, Shinichi; Kato, Mamoru; Shibata, Tatsuhiro; Oki, Eiji; Saeki, Hiroshi; Shirabe, Ken; Oda, Yoshinao; Maehara, Yoshihiko; Komune, Shizuo; Mori, Masaki; Suzuki, Yutaka; Yamamoto, Ken; Aburatani, Hiroyuki; Ogawa, Seishi; Miyano, Satoru; Mimori, Koshi

2016-01-01

Understanding intratumor heterogeneity is clinically important because it could cause therapeutic failure by fostering evolutionary adaptation. To this end, we profiled the genome and epigenome in multiple regions within each of nine colorectal tumors. Extensive intertumor heterogeneity is observed, from which we inferred the evolutionary history of the tumors. First, clonally shared alterations appeared, in which C>T transitions at CpG site and CpG island hypermethylation were relatively enriched. Correlation between mutation counts and patients’ ages suggests that the early-acquired alterations resulted from aging. In the late phase, a parental clone was branched into numerous subclones. Known driver alterations were observed frequently in the early-acquired alterations, but rarely in the late-acquired alterations. Consistently, our computational simulation of the branching evolution suggests that extensive intratumor heterogeneity could be generated by neutral evolution. Collectively, we propose a new model of colorectal cancer evolution, which is useful for understanding and confronting this heterogeneous disease. PMID:26890883

Integrated Multiregional Analysis Proposing a New Model of Colorectal Cancer Evolution.

PubMed

Uchi, Ryutaro; Takahashi, Yusuke; Niida, Atsushi; Shimamura, Teppei; Hirata, Hidenari; Sugimachi, Keishi; Sawada, Genta; Iwaya, Takeshi; Kurashige, Junji; Shinden, Yoshiaki; Iguchi, Tomohiro; Eguchi, Hidetoshi; Chiba, Kenichi; Shiraishi, Yuichi; Nagae, Genta; Yoshida, Kenichi; Nagata, Yasunobu; Haeno, Hiroshi; Yamamoto, Hirofumi; Ishii, Hideshi; Doki, Yuichiro; Iinuma, Hisae; Sasaki, Shin; Nagayama, Satoshi; Yamada, Kazutaka; Yachida, Shinichi; Kato, Mamoru; Shibata, Tatsuhiro; Oki, Eiji; Saeki, Hiroshi; Shirabe, Ken; Oda, Yoshinao; Maehara, Yoshihiko; Komune, Shizuo; Mori, Masaki; Suzuki, Yutaka; Yamamoto, Ken; Aburatani, Hiroyuki; Ogawa, Seishi; Miyano, Satoru; Mimori, Koshi

2016-02-01

Understanding intratumor heterogeneity is clinically important because it could cause therapeutic failure by fostering evolutionary adaptation. To this end, we profiled the genome and epigenome in multiple regions within each of nine colorectal tumors. Extensive intertumor heterogeneity is observed, from which we inferred the evolutionary history of the tumors. First, clonally shared alterations appeared, in which C>T transitions at CpG site and CpG island hypermethylation were relatively enriched. Correlation between mutation counts and patients' ages suggests that the early-acquired alterations resulted from aging. In the late phase, a parental clone was branched into numerous subclones. Known driver alterations were observed frequently in the early-acquired alterations, but rarely in the late-acquired alterations. Consistently, our computational simulation of the branching evolution suggests that extensive intratumor heterogeneity could be generated by neutral evolution. Collectively, we propose a new model of colorectal cancer evolution, which is useful for understanding and confronting this heterogeneous disease.

Improving Customer Satisfaction in an R and D Environment

NASA Technical Reports Server (NTRS)

Alexander, Anita; Liou, Y. H. Andrew

1998-01-01

Satisfying customer needs is critical to the sustained competitive advantage of service suppliers. It is therefore important to understand the types of customer needs which, if fulfilled or exceeded, add value and contribute to overall customer satisfaction. This study identifies the needs of various research and development (R&D) customers who contract for engineering and design support services. The Quality Function Deployment (QFD) process was used to organize and translate each customer need into performance measures that, if implemented, can improve customer satisfaction. This study also provides specific performance measures that will more accurately guide the efforts of the engineering supplier. These organizations can either implement the QFD methodology presented herein or extract a few performance measures that are specific to the quality dimensions in need of improvement. Listening to 'what' customers talk about is a good first start.

Exact mapping of the 2+1 Dirac oscillator onto the Jaynes-Cummings model: Ion-trap experimental proposal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bermudez, A.; Martin-Delgado, M. A.; Solano, E.

2007-10-15

We study the dynamics of the 2+1 Dirac oscillator exactly and find spin oscillations due to a Zitterbewegung of purely relativistic origin. We find an exact mapping of this quantum-relativistic system onto a Jaynes-Cummings model, describing the interaction of a two-level atom with a quantized single-mode field. This equivalence allows us to map a series of quantum optical phenomena onto the relativistic oscillator and vice versa. We make a realistic experimental proposal, in reach with current technology, for studying the equivalence of both models using a single trapped ion.

Women's Language Model: A Proposal.

ERIC Educational Resources Information Center

Dumas, Bethany K.

It is possible to think of women's language in terms of the model implied by the following statement. Insofar as native speakers of English are concerned, the language of women in America has four sets of components: those shared with the language of men in America; those shared, in varying proportions, with other women living in patriarchies;…

Real external predictivity of QSAR models: how to evaluate it? Comparison of different validation criteria and proposal of using the concordance correlation coefficient.

PubMed

Chirico, Nicola; Gramatica, Paola

2011-09-26

The main utility of QSAR models is their ability to predict activities/properties for new chemicals, and this external prediction ability is evaluated by means of various validation criteria. As a measure for such evaluation the OECD guidelines have proposed the predictive squared correlation coefficient Q(2)(F1) (Shi et al.). However, other validation criteria have been proposed by other authors: the Golbraikh-Tropsha method, r(2)(m) (Roy), Q(2)(F2) (Schüürmann et al.), Q(2)(F3) (Consonni et al.). In QSAR studies these measures are usually in accordance, though this is not always the case, thus doubts can arise when contradictory results are obtained. It is likely that none of the aforementioned criteria is the best in every situation, so a comparative study using simulated data sets is proposed here, using threshold values suggested by the proponents or those widely used in QSAR modeling. In addition, a different and simple external validation measure, the concordance correlation coefficient (CCC), is proposed and compared with other criteria. Huge data sets were used to study the general behavior of validation measures, and the concordance correlation coefficient was shown to be the most restrictive. On using simulated data sets of a more realistic size, it was found that CCC was broadly in agreement, about 96% of the time, with other validation measures in accepting models as predictive, and in almost all the examples it was the most precautionary. The proposed concordance correlation coefficient also works well on real data sets, where it seems to be more stable, and helps in making decisions when the validation measures are in conflict. Since it is conceptually simple, and given its stability and restrictiveness, we propose the concordance correlation coefficient as a complementary, or alternative, more prudent measure of a QSAR model to be externally predictive.

A Proposed Defect Tracking Model for Classifying the Inserted Defect Reports to Enhance Software Quality Control

PubMed Central

Khedr, Ayman E.; Sayed, Mostafa

2013-01-01

CONFLICT OF INTEREST: NONE DECLARED Defect tracking systems play an important role in the software development organizations as they can store historical information about defects. There are many research in defect tracking models and systems to enhance their capabilities to be more specifically tracking, and were adopted with new technology. Furthermore, there are different studies in classifying bugs in a step by step method to have clear perception and applicable method in detecting such bugs. This paper shows a new proposed defect tracking model for the purpose of classifying the inserted defects reports in a step by step method for more enhancement of the software quality. PMID:24039334

Proposal for Professional Development Schools.

ERIC Educational Resources Information Center

Rajuan, Maureen

This paper discusses the reluctance of Israeli inservice teachers to assume the role of mentor to student teachers in their classrooms, proposing an alternative Professional Development School (PDS) model as a starting point for rethinking ways to recruit teachers into this role. In this model, two student teachers assume full responsibility for 1…

Social Security reform: evaluating current proposals. Latest results of the EBRI-SSASIM2 policy simulation model.

PubMed

Copeland, C; VanDerhei, J; Salisbury, D L

1999-06-01

The present Social Security program has been shown to be financially unsustainable in the future without modification to the current program. The purpose of this Issue Brief, EBRI's fourth in a series on Social Security reform, is threefold: to illustrate new features of the EBRI-SSASIM2 policy simulation model not available in earlier EBRI publications, to expand quantitative analysis to specific proposals, and to evaluate the uncertainty involved in proposals that rely on equity investment. This analysis compares the Gregg/Breaux-Kolbe/Stenholm (GB-KS) and Moynihan/Kerrey proposals with three generic or "traditional" reforms: increasing taxes, reducing benefits, and/or increasing the retirement age. Both proposals would create individual accounts by "carving out" funds from current Social Security payroll taxes. This analysis also examines other proposed changes that would "add on" to existing Social Security funds through the use of general revenue transfers and/or investment in the equities market. President Clinton has proposed a general revenue transfer and the collective investment of some of the OASDI trust fund assets in equities. Reps. Archer and Shaw have proposed a general revenue tax credit to establish individual accounts that would be invested partially in the equities markets. When comparing Social Security reform proposals that would specifically alter benefit levels, the Moynihan/Kerrey bill compares quite favorably with the other proposals in both benefit levels and payback ratios, when individuals elect to use the individual account option. In contrast, the GB-KS bills do not compare quite as favorably for their benefit levels, but do compare favorably in terms of payback ratios. An important comparison in these bills is the administrative costs of managing the individual accounts, since benefits can be lowered by up to 23 percent when going from the assumed low to high administrative costs. Moreover, allowing individuals to decide whether to

Project on the Good Physician: A Proposal for a Moral Intuitionist Model of Virtuous Caring.

PubMed

Michael Leffel, G; Oakes Mueller, Ross A; Ham, Sandra A; Curlin, Farr A; Yoon, John D

2017-01-01

In the Project on the Good Physician, the authors endeavor to advance medical character education by proposing and testing a moral intuitionist model of virtuous caring that may be applicable to physician training. This model proposes that the moral intuition to care/harm motivates students to extend care to those in need. Hypothesis 1: Medical students will report stronger preferences for the intuition to Care/harm over other moral intuitions in clinical decision making. Hypothesis 2: Care/harm will have the strongest correlation with Generosity than the other moral intuitions. Hypothesis 3: There will be positive associations between Care/harm and the caring virtues (Mindfulness, Empathic Compassion, and Generosity). Hypotheses 4-5: The virtue of Empathic Compassion (or Mindfulness) will moderate the relationship between Care/harm and Generosity. Hypotheses 6-7: Neuroticism (or Burnout) will negatively moderate the association between Care/harm and Generosity (or between Empathic Compassion and Generosity). The authors used data from a 2011 nationally representative sample of U.S. medical students (N = 500) to test the relationship between the moral intuition to Care/harm and physician caring virtues. Moral intuitions were assessed using the Moral Foundations Questionnaire, whereas physician virtues were measured using scales adapted from validated constructs. The authors found that students reported stronger preferences for the intuition to Care/harm over the four other moral intuitions. Each moral foundation was weakly but significantly correlated with Generosity, yet Care/harm had the strongest correlation among them. Neuroticism and Burnout did not weaken the link between Care/harm and the virtues. Data from the descriptive-correlational study reported here offer preliminary support for the construct validity of an educational model that targets the moral intuitions. The article concludes with a discussion of the implications of a moral intuitionist approach

A proposal for a new multiaxial model of psychiatric diagnosis. A continuum-based patient model derived from evolutionary developmental gene-environment interaction.

PubMed

Leigh, Hoyle

2009-01-01

To review recent genetic and neuroscientific research on psychiatric syndromes based on the current diagnostic scheme, and develop a better-fitting multiaxial patient-oriented diagnostic model. DSM I, published in 1952, considered psychiatric illnesses as reactions or extremes of adaptations of the patient's personality to stressful environmental demands. Personality itself was determined by constitution and psychodynamic development. In 1980, this continuum model gave way to an atheoretical categorical diagnostic scheme (DSM III), based on research diagnostic criteria for obtaining 'pure cultures' of patients for biological research. Subsequent research using the 'pure cultures' suggests that psychiatric syndromes represent a phenotypic continuum determined by genes, childhood traumas, and recent stress, mitigated by childhood nurturance, education, and current social support. Specific gene x childhood abuse x recent stress interactions have been discovered, which may serve as a model of how interacting vulnerability genes may or may not result in a psychiatric syndrome, depending on the individual's developmental history and current stress. A continuum model is proposed, with genes interacting with early experiences of stress or nurturance resulting in brain states that may evince minor but persistent symptoms (neurosis) or maladaptive patterns of behavior (personality disorder). The addition of recent or current stress may precipitate a major psychiatric syndrome. While a severe genetic predisposition, such as a mutation, may be sufficient to cause a major syndrome, major psychiatric syndromes are best conceptualized as dysregulation of evolutionarily adaptive brain functions, such as anxiety and vigilance. A new multiaxial model of psychiatric diagnosis is proposed based on this model: axis I for phenomenological diagnoses that include major psychiatric syndromes (e.g. depressive syndrome, psychosis), neuroses, personality disorders, and isolated symptoms; axis

SU-E-I-25: Performance Evaluation of a Proposed CMOS-Based X-Ray Detector Using Linear Cascade Model Analysis.

PubMed

Jain, A; Bednarek, D; Rudin, S

2012-06-01

The need for high-resolution, dynamic x-ray imaging capability for neurovascular applications has put an ever increasing demand on x-ray detector technology. Present state-of-the-art detectors such as flat panels have limited resolution and noise performance. A linear cascade model analysis was used to estimate the theoretical performance for a proposed CMOS-based detector. The proposed CMOS-based detector was assumed to have a 300-micron thick HL type CsI phosphor, 35-micron pixels, a variable gain light image intensifier (LU), and 400 electron readout noise. The proposed detector has a CMOS sensor coupled to an LII which views the output of the CsI phosphor. For the analysis the whole imaging chain was divided into individual stages characterized by one of the basic processes (stochastic/deterministic blurring, binomial selection, quantum gain, additive noise). Standard linear cascade modeling was used for the propagation of signal and noise through the stages and an RQA5 spectrum was assumed. The gain, blurring or transmission of different stages was either measured or taken from manufacturer's specifications. The theoretically calculated MTF and DQE for the proposed detector were compared with a high-resolution, high-sensitive Micro-Angio Fluoroscope (MAF), predecessor of the proposed detector. Signal and noise for each of the 19 stages in the complete imaging chain were calculated and showed improved performance. For example, at 5 cycles/mm the MTF and DQE were 0.08 and 0.28, respectively, for the CMOS detector compared to 0.05 and 0.07 for the MAF detector. The proposed detector will have improved MTF and DQE and slimmer physical dimension due to the elimination of the large fiber-optic taper used in the MAF. Once operational, the proposed CMOS detector will serve as a further improvement over standard flat panel detectors compared to the MAF which is already receiving a very positive reception by neuro-vascular interventionalists. (Support:NIH-Grant R01EB

Cognitive processes and neural basis of language switching: proposal of a new model.

PubMed

Moritz-Gasser, Sylvie; Duffau, Hugues

2009-12-09

Although studies on bilingualism are abundant, cognitive processes and neural foundations of language switching received less attention. The aim of our study is to provide new insights to this still open question: do dedicated region(s) for language switching exist or is this function underlain by a distributed circuit of interconnected brain areas, part of a more general cognitive system? On the basis of recent behavioral, neuroimaging, and brain stimulation studies, we propose an original 'hodological' model of language switching. This process might be subserved by a large-scale cortico-subcortical network, with an executive system (prefrontal cortex, anterior cingulum, caudate nucleus) controlling a more dedicated language subcircuit, which involves postero-temporal areas, supramarginal and angular gyri, Broca's area, and the superior longitudinal fasciculus.

Model experiments to evaluate vortex dissipation devices proposed for installation on or near aircraft runways

NASA Technical Reports Server (NTRS)

Kohl, R. E.

1973-01-01

The effectiveness of various vortex dissipation devices proposed for installation on or near aircraft runways is evaluated on basis of results of experiments conducted with a 0.03-scale model of a Boeing 747 transport aircraft in conjunction with a simulated runway. The test variables included type of vortex dissipation device, mode of operation of the powered devices, and altitude, lift coefficient and speed of the generating aircraft. A total of fifteen devices was investigated. The evaluation is based on time sequence photographs taken in the vertical and horizontal planes during each run.

Rendezvous, proximity operations and capture quality function deployment report

NASA Technical Reports Server (NTRS)

Lamkin, Stephen L. (Editor)

1991-01-01

Rendezvous, Proximity Operations, and Capture (RPOC) is a missions operations area which is extremely important to present and future space initiatives and must be well planned and coordinated. To support this, a study team was formed to identify a specific plan of action using the Quality Function Deployment (QFD) process. This team was composed of members from a wide spectrum of engineering and operations organizations which are involved in the RPOC technology area. The key to this study's success is an understanding of the needs of potential programmatic customers and the technology base available for system implementation. To this end, the study team conducted interviews with a variety of near term and future programmatic customers and technology development sponsors. The QFD activity led to a thorough understanding of the needs of these customers in the RPOC area, as well as the relative importance of these needs.

Information-sharing to promote informed choice in prenatal screening in the spirit of the SOGC clinical practice guideline: a proposal for an alternative model.

PubMed

Vanstone, Meredith; Kinsella, Elizabeth Anne; Nisker, Jeff

2012-03-01

The 2011 SOGC clinical practice guideline "Prenatal Screening for Fetal Aneuploidy in Singleton Pregnancies" recommends that clinicians offer prenatal screening to all pregnant women and provide counselling in a non-directive manner. Non-directive counselling is intended to facilitate autonomous decision-making and remove the clinician's views regarding a particular course of action. However, recent research in genetic counselling raises concerns that non-directive counselling is neither possible nor desirable, and that it may not be the best way to facilitate informed choice. We propose an alternative model of information-sharing specific to prenatal screening that combines attributes of the models of informative decision-making and shared decision-making. Our proposed model is intended to provide clinicians with a strategy to communicate information about prenatal screening in a way that facilitates a shared deliberative process and autonomous decision-making. Our proposed model may better prepare a pregnant woman to make an informed choice about participating in prenatal screening on the basis of her consideration of the medical information provided by her clinician and her particular circumstances and values.

a Proposal for Generalization of 3d Models

NASA Astrophysics Data System (ADS)

Uyar, A.; Ulugtekin, N. N.

2017-11-01

In recent years, 3D models have been created of many cities around the world. Most of the 3D city models have been introduced as completely graphic or geometric models, and the semantic and topographic aspects of the models have been neglected. In order to use 3D city models beyond the task, a generalization is necessary. CityGML is an open data model and XML-based format for the storage and exchange of virtual 3D city models. Level of Details (LoD) which is an important concept for 3D modelling, can be defined as outlined degree or prior representation of real-world objects. The paper aim is first describes some requirements of 3D model generalization, then presents problems and approaches that have been developed in recent years. In conclude the paper will be a summary and outlook on problems and future work.

Proposal for a model to assess the effect of seismic activity on the triggering of debris flows

NASA Astrophysics Data System (ADS)

Vidar Vangelsten, Bjørn; Liu, Zhongqiang; Eidsvig, Unni; Luna, Byron Quan; Nadim, Farrokh

2013-04-01

Landslide triggered by earthquakes is a serious threat for many communities around the world, and in some cases is known to have caused 25-50% of the earthquake fatalities. Seismic shaking can contribute to the triggering of debris flows either during the seismic event or indirectly by increasing the susceptibility of the slope to debris flow during intense rainfall in a period after the seismic event. The paper proposes a model to quantify both these effects. The model is based on an infinite slope formulation where precipitation and earthquakes influence the slope stability as follows: (1) During the shaking, the factor of safety is reduced due to cyclic pore pressure build-up where the cyclic pore pressure is modelled as a function of earthquake duration and intensity (measured as number of equivalent shear stress cycles and cyclic shear stress magnitude) and in-situ soil conditions (measured as average normalised shear stress). The model is calibrated using cyclic triaxial and direct simple shear (DSS) test data on clay and sand. (2) After the shaking, the factor of safety is modified using a combined empirical and analytical model that links observed earthquake induced changes in rainfall thresholds for triggering of debris flow to an equivalent reduction in soil shear strength. The empirical part uses data from past earthquakes to propose a conceptual model linking a site-specific reduction factor for rainfall intensity threshold (needed to trigger debris flows) to earthquake magnitude, distance from the epicentre and time period after the earthquake. The analytical part is a hydrological model for transient rainfall infiltration into an infinite slope in order to translate the change in rainfall intensity threshold into an equivalent reduction in soil shear strength. This is generalised into a functional form giving a site-specific shear strength reduction factor as function of earthquake history and soil conditions. The model is suitable for hazard and risk

Associating versus Proposing or Associating What We Propose: Comment on Gawronski and Bodenhausen

ERIC Educational Resources Information Center

Albarracin, Dolores; Hart, William; McCulloch, Kathleen C.

2006-01-01

This commentary on the article by B. Gawronski and G. V. Bodenhausen (see record 2006-10465-003) highlights the strengths of the associative-propositional evaluation model. It then describes problems in proposing a qualitative separation between propositional and associative processes. Propositional processes are instead described as associative.…

Project Proposals Evaluation

NASA Astrophysics Data System (ADS)

Encheva, Sylvia; Tumin, Sharil

2009-08-01

Collaboration among various firms has been traditionally used trough single project joint ventures for bonding purposes. Eventhough the performed work is usually beneficial to some extend to all participants, the type of collaboration option to be adapted is strongly influenced by overall purposes and goals that can be achieved. In order to facilitate a choice of collaboration option best suited to a firm's need a computer based model is proposed.

Self-rated health, multimorbidity and depression in Mexican older adults: Proposal and evaluation of a simple conceptual model.

PubMed

Bustos-Vázquez, Eduardo; Fernández-Niño, Julián Alfredo; Astudillo-Garcia, Claudia Iveth

2017-04-01

Self-rated health is an individual and subjective conceptualization involving the intersection of biological, social and psychological factors. It provides an invaluable and unique evaluation of a person's general health status. To propose and evaluate a simple conceptual model to understand self-rated health and its relationship to multimorbidity, disability and depressive symptoms in Mexican older adults. We conducted a cross-sectional study based on a national representative sample of 8,874 adults of 60 years of age and older. Self-perception of a positive health status was determined according to a Likert-type scale based on the question: "What do you think is your current health status?" Intermediate variables included multimorbidity, disability and depressive symptoms, as well as dichotomous exogenous variables (sex, having a partner, participation in decision-making and poverty). The proposed conceptual model was validated using a general structural equation model with a logit link function for positive self-rated health. A direct association was found between multimorbidity and positive self-rated health (OR=0.48; 95% CI: 0.42-0.55), disability and positive self-rated health (OR=0.35; 95% CI: 0.30-0.40), depressive symptoms and positive self-rated health (OR=0.38; 95% CI: 0.34-0.43). The model also validated indirect associations between disability and depressive symptoms (OR=2.25; 95% CI: 2.01- 2.52), multimorbidity and depressive symptoms (OR=1.79; 95% CI: 1.61-2.00) and multimorbidity and disability (OR=1.98; 95% CI: 1.78-2.20). A parsimonious theoretical model was empirically evaluated, which enabled identifying direct and indirect associations with positive self-rated health.

Nurse practitioners in aged care: documentary analysis of successful project proposals.

PubMed

Clark, Shannon J; Parker, Rhian M; Davey, Rachel

2014-11-01

Meeting the primary health care needs of an aging population is an increasing challenge for many Western nations. In Australia, the federal government introduced a program to develop, test, and evaluate nurse practitioner models in aged care settings. In this article, we present a documentary analysis of 32 project proposals awarded funding under the Nurse Practitioner-Aged Care Models of Practice Program. Successfully funded models were diverse and were operated by a range of organizations across Australia. We identified three key priorities as underlying the proposed models: "The right care," "in the right place," and "at the right time." In this article, we explore how these priorities were presented by different applicants in different ways. Through the presentation of their models, the program's applicants identified and proposed to address current gaps in health services. Applicants contrasted their proposed models with available services to create persuasive and competitive applications for funding. © The Author(s) 2014.

Testing Proposed Neuronal Models of Effective Connectivity Within the Cortico-basal Ganglia-thalamo-cortical Loop During Loss of Consciousness.

PubMed

Crone, Julia Sophia; Lutkenhoff, Evan Scott; Bio, Branden Joseph; Laureys, Steven; Monti, Martin Max

2017-04-01

In recent years, a number of brain regions and connectivity patterns have been proposed to be crucial for loss and recovery of consciousness but have not been compared in detail. In a 3 T resting-state functional magnetic resonance imaging paradigm, we test the plausibility of these different neuronal models derived from theoretical and empirical knowledge. Specifically, we assess the fit of each model to the dynamic change in effective connectivity between specific cortical and subcortical regions at different consecutive levels of propofol-induced sedation by employing spectral dynamic causal modeling. Surprisingly, our findings indicate that proposed models of impaired consciousness do not fit the observed patterns of effective connectivity. Rather, the data show that loss of consciousness, at least in the context of propofol-induced sedation, is marked by a breakdown of corticopetal projections from the globus pallidus. Effective connectivity between the globus pallidus and the ventral posterior cingulate cortex, present during wakefulness, fades in the transition from lightly sedated to full loss of consciousness and returns gradually as consciousness recovers, thereby, demonstrating the dynamic shift in brain architecture of the posterior cingulate "hub" during changing states of consciousness. These findings highlight the functional role of a previously underappreciated direct pallido-cortical connectivity in supporting consciousness. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

The Proposal Concept of Development and Implementation in Strategy of Sustainable Corporate Social Responsibility in the Context of the HCS Model 3E

NASA Astrophysics Data System (ADS)

Sakál, Peter; Hrdinová, Gabriela

2016-06-01

This article is the result of a conceptual design methodology for the development of a sustainable strategy of sustainable corporate social responsibility (SCSR) in the context of the HCS model 3E formed, as a co-author within the stated grants and dissertation. On the basis of the use of propositional logic, the SCSR procedure is proposed for incorporation into the corporate strategy of sustainable development and the integrated management system (IMS) of the industrial enterprise. The aim of this article is the proposal of the concept of development and implementation strategy of SCSR in the context of the HCS model 3E.

Preference and strategy in proposer's prosocial giving in the ultimatum game.

PubMed

Inaba, Misato; Inoue, Yumi; Akutsu, Satoshi; Takahashi, Nobuyuki; Yamagishi, Toshio

2018-01-01

The accumulation of findings that most responders in the ultimatum game reject unfair offers provides evidence that humans are driven by social preferences such as preferences for fairness and prosociality. On the other hand, if and how the proposer's behavior is affected by social preferences remains unelucidated. We addressed this question for the first time by manipulating the knowledge that the proposer had about the responder's belief concerning the intentionality of the proposer. In a new game called the "ultimatum game with ambiguous intentions of the proposer (UGAMB)," we made the intentionality of the proposer ambiguous to the recipient. We expected and found that the proposer would make more unfair offers in this new game than in the standard ultimatum game. This expectation can be derived from either the preference-based model or the strategy model of the proposer's giving decision. The additional finding that more unfair giving in the UGAMB was not mediated by the proposer's expectation that the recipient would be more willing to accept unfair offers provided support for the preference-based model. Using a psychological measure of cognitive control, the preference-based model received additional support through a conceptual replication of the previous finding that cognitive control of intuitive drive for prosociality in the dictator game, rather than mind reading in the ultimatum game, is responsible for the difference in giving between the two games.

The Martian dust cycle: A proposed model

NASA Technical Reports Server (NTRS)

Greeley, Ronald

1987-01-01

Despite more than a decade of study of martian dust storms, many of their characteristics and associated processes remain enigmatic, including the mechanisms for dust raising, modes of settling, and the nature of dust deposits. However, observations of Mars dust, considerations of terrestrial analogs, theoretical models, and laboratory simulations permit the formulation of a Martian Dust Cycle Model, which consists of three main processes: (1) suspension threshold, (2) transportation, and (3) deposition; two associated processes are also included: (4) dust removal and (5) the addition of new dust to the cycle. Although definitions vary, dust includes particles less than 4 to approx. 60 microns in diameter, which by terrestrial usage includes silt, loess, clay, and aerosolic dust particles. The dust cycle model is explained.

Study on the noncoincidence effect phenomenon using matrix isolated Raman spectra and the proposed structural organization model of acetone in condense phase

NASA Astrophysics Data System (ADS)

Xu, Wenwen; Wu, Fengqi; Zhao, Yanying; Zhou, Ran; Wang, Huigang; Zheng, Xuming; Ni, Bukuo

2017-03-01

The isotropic and anisotropic Raman spectra of acetone and deuterated acetone isolated in an argon matrix have been recorded for the understanding of noncoincidence effect (NCE) phenomenon. According to the matrix isolated Raman spectra and DFT calculations, we proposed aggregated model for the explanations of the acetone C=O vibration NCE phenomenon and its concentration effect. The experimental data were in consistence with the DFT calculations performed at the B3LYP-D3/6-311 G (d,p) levels based on the proposed model. The experimental identification of the monomer, dimer and trimer are reported here, and the dynamic of the transformation from monomer to aggregated structure can be easily controlled by tuning annealing temperature.

Placing Health Trajectories in Family and Historical Context: A Proposed Enrichment of the Life Course Health and Development Model.

PubMed

Jones, Marian Moser; Roy, Kevin

2017-10-01

Purpose This article offers constructive commentary on The Life Course Health and Development Model (LCHD) as an organizing framework for MCH research. Description The LCHD has recently been proposed as an organizing framework for MCH research. This model integrates biomedical, biopsychosocial, and life course frameworks, to explain how "individual health trajectories" develop over time. In this article, we propose that the LCHD can improve its relevance to MCH policy and practice by: (1) placing individual health trajectories within the context of family health trajectories, which unfold within communities and societies, over historical and generational time; and (2) placing greater weight on the social determinants that shape health development trajectories of individuals and families to produce greater or lesser health equity. Assessment We argue that emphasizing these nested, historically specific social contexts in life course models will enrich study design and data analysis for future developmental science research, will make the LCHD model more relevant in shaping MCH policy and interventions, and will guard against its application as a deterministic framework. Specific ways to measure these and examples of how they can be integrated into the LCHD model are articulated. Conclusion Research applying the LCHD should incorporate the specific family and socio-historical contexts in which development occurs to serve as a useful basis for policy and interventions. Future longitudinal studies of maternal and child health should include collection of time-dependent data related to family environment and other social determinants of health, and analyze the impact of historical events and trends on specific cohorts.

A comparative survey of current and proposed tropospheric refraction-delay models for DSN radio metric data calibration

NASA Technical Reports Server (NTRS)

Estefan, J. A.; Sovers, O. J.

1994-01-01

The standard tropospheric calibration model implemented in the operational Orbit Determination Program is the seasonal model developed by C. C. Chao in the early 1970's. The seasonal model has seen only slight modification since its release, particularly in the format and content of the zenith delay calibrations. Chao's most recent standard mapping tables, which are used to project the zenith delay calibrations along the station-to-spacecraft line of sight, have not been modified since they were first published in late 1972. This report focuses principally on proposed upgrades to the zenith delay mapping process, although modeling improvements to the zenith delay calibration process are also discussed. A number of candidate approximation models for the tropospheric mapping are evaluated, including the semi-analytic mapping function of Lanyi, and the semi-empirical mapping functions of Davis, et. al.('CfA-2.2'), of Ifadis (global solution model), of Herring ('MTT'), and of Niell ('NMF'). All of the candidate mapping functions are superior to the Chao standard mapping tables and approximation formulas when evaluated against the current Deep Space Network Mark 3 intercontinental very long baselines interferometry database.

Modeling the Hydrogeochemical Transport of Radionuclides through Engineered Barriers System in the Proposed LLW Disposal Site of Taiwan - 12082

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Wen-Sheng; Liu, Chen-Wuing; Tsao, Jui-Hsuan

2012-07-01

A proposed site for final disposal of low-level radioactive waste located in Daren Township of Taitung County along the southeastern coast has been on the selected list in Taiwan. The geology of the Daren site consists of argillite and meta-sedimentary rocks. A mined cavern design with a tunnel system of 500 m below the surface is proposed. Concrete is used as the main confinement material for the engineered barrier. To investigate the hydrogeochemical transport of radionuclides through engineered barriers system, HYDROGEOCHEM5.0 model was applied to simulate the complex chemical interactions among radionuclides, the cement minerals of the concrete, groundwater flow,more » and transport in the proposed site. The simulation results showed that the engineered barriers system with the side ditch efficiently drained the ground water and lowered the concentration of the concrete degradation induced species (e.g., hydrogen ion, sulfate, and chloride). The velocity of groundwater observed at side ditch gradually decreased with time due to the fouling of pore space by the mineral formation of ettringite and thaumasite. The short half-life of Co-60, Sr-90 and Cs-137 significantly reduced the concentrations, whereas the long half-life of I-129(1.57x10{sup 7} years) and Am-241(432 years) remain stable concentrations at the interface of waste canister and concrete barrier after 300 years. The mineral saturation index (SI) was much less than zero due to the low aqueous concentration of radionuclide, so that the precipitation formation of Co-60, Sr-90, I-129, Cs-137 and Am-241 related minerals were not found. The effect of adsorption/desorption (i.e., surface complexation model) could be a crucial geochemical mechanism for the modeling of liquid-solid phase behavior of radionuclide in geochemically dynamic environments. Moreover, the development of advanced numerical models that are coupled with hydrogeochemical transport and dose assessment of radionuclide is required in the

RAMI modeling of selected balance of plant systems for the proposed Accelerator Production of Tritium (APT) project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radder, J.A.; Cramer, D.S.

1997-06-01

In order to meet Department of Energy (DOE) Defense Program requirements for tritium in the 2005-2007 time frame, new production capability must be made available. The Accelerator Production of Tritium (APT) Plant is being considered as an alternative to nuclear reactor production of tritium, which has been the preferred method in the past. The proposed APT plant will use a high-power proton accelerator to generate thermal neutrons that will be captured in {sup 3}He to produce tritium (3H). It is expected that the APT Plant will be built and operated at the DOE`s Savannah River Site (SRS) in Aiken, Southmore » Carolina. Discussion is focused on Reliability, Availability, Maintainability, and Inspectability (RAMI) modeling of recent conceptual designs for balance of plant (BOP) systems in the proposed APT Plant. In the conceptual designs for balance of plant (BOP) systems in the proposed APT Plant. In the conceptual design phase, system RAMI estimates are necessary to identify the best possible system alternative and to provide a valid picture of the cost effectiveness of the proposed system for comparison with other system alternatives. RAMI estimates in the phase must necessarily be based on generic data. The objective of the RAMI analyses at the conceptual design stage is to assist the designers in achieving an optimum design which balances the reliability and maintainability requirements among the subsystems and components.« less

The Importance of Take-Out Food Packaging Attributes: Conjoint Analysis and Quality Function Deployment Approach

NASA Astrophysics Data System (ADS)

Lestari Widaningrum, Dyah

2014-03-01

This research aims to investigate the importance of take-out food packaging attributes, using conjoint analysis and QFD approach among consumers of take-out food products in Jakarta, Indonesia. The conjoint results indicate that perception about packaging material (such as paper, plastic, and polystyrene foam) plays the most important role overall in consumer perception. The clustering results that there is strong segmentation in which take-out food packaging material consumer consider most important. Some consumers are mostly oriented toward the colour of packaging, while another segment of customers concerns on packaging shape and packaging information. Segmentation variables based on packaging response can provide very useful information to maximize image of products through the package's impact. The results of House of Quality development described that Conjoint Analysis - QFD is a useful combination of the two methodologies in product development, market segmentation, and the trade off between customers' requirements in the early stages of HOQ process

Predicting the effects of proposed Mississippi River diversions on oyster habitat quality; application of an oyster habitat suitability index model

USGS Publications Warehouse

Soniat, Thomas M.; Conzelmann, Craig P.; Byrd, Jason D.; Roszell, Dustin P.; Bridevaux, Joshua L.; Suir, Kevin J.; Colley, Susan B.

2013-01-01

In an attempt to decelerate the rate of coastal erosion and wetland loss, and protect human communities, the state of Louisiana developed its Comprehensive Master Plan for a Sustainable Coast. The master plan proposes a combination of restoration efforts including shoreline protection, marsh creation, sediment diversions, and ridge, barrier island, and hydrological restoration. Coastal restoration projects, particularly the large-scale diversions of fresh water from the Mississippi River, needed to supply sediment to an eroding coast potentially impact oyster populations and oyster habitat. An oyster habitat suitability index model is presented that evaluates the effects of a proposed sediment and freshwater diversion into Lower Breton Sound. Voluminous freshwater, needed to suspend and broadly distribute river sediment, will push optimal salinities for oysters seaward and beyond many of the existing reefs. Implementation and operation of the Lower Breton Sound diversion structure as proposed would render about 6,173 ha of hard bottom immediately east of the Mississippi River unsuitable for the sustained cultivation of oysters. If historical harvests are to be maintained in this region, a massive and unprecedented effort to relocate private leases and restore oyster bottoms would be required. Habitat suitability index model results indicate that the appropriate location for such efforts are to the east and north of the Mississippi River Gulf Outlet.

Numerical Differentiation Methods for Computing Error Covariance Matrices in Item Response Theory Modeling: An Evaluation and a New Proposal

ERIC Educational Resources Information Center

Tian, Wei; Cai, Li; Thissen, David; Xin, Tao

2013-01-01

In item response theory (IRT) modeling, the item parameter error covariance matrix plays a critical role in statistical inference procedures. When item parameters are estimated using the EM algorithm, the parameter error covariance matrix is not an automatic by-product of item calibration. Cai proposed the use of Supplemented EM algorithm for…

The proposed 'concordance-statistic for benefit' provided a useful metric when modeling heterogeneous treatment effects.

PubMed

van Klaveren, David; Steyerberg, Ewout W; Serruys, Patrick W; Kent, David M

2018-02-01

Clinical prediction models that support treatment decisions are usually evaluated for their ability to predict the risk of an outcome rather than treatment benefit-the difference between outcome risk with vs. without therapy. We aimed to define performance metrics for a model's ability to predict treatment benefit. We analyzed data of the Synergy between Percutaneous Coronary Intervention with Taxus and Cardiac Surgery (SYNTAX) trial and of three recombinant tissue plasminogen activator trials. We assessed alternative prediction models with a conventional risk concordance-statistic (c-statistic) and a novel c-statistic for benefit. We defined observed treatment benefit by the outcomes in pairs of patients matched on predicted benefit but discordant for treatment assignment. The 'c-for-benefit' represents the probability that from two randomly chosen matched patient pairs with unequal observed benefit, the pair with greater observed benefit also has a higher predicted benefit. Compared to a model without treatment interactions, the SYNTAX score II had improved ability to discriminate treatment benefit (c-for-benefit 0.590 vs. 0.552), despite having similar risk discrimination (c-statistic 0.725 vs. 0.719). However, for the simplified stroke-thrombolytic predictive instrument (TPI) vs. the original stroke-TPI, the c-for-benefit (0.584 vs. 0.578) was similar. The proposed methodology has the potential to measure a model's ability to predict treatment benefit not captured with conventional performance metrics. Copyright © 2017 Elsevier Inc. All rights reserved.

A Proposal of B to B Collaboration Process Model based on a Concept of Service and its Application to Energy Saving Service Business

NASA Astrophysics Data System (ADS)

Zhang, Qi; Kosaka, Michitaka; Shirahada, Kunio; Yabutani, Takashi

This paper proposes a new framework for B to B collaboration process based on a concept of service. Service value, which gives users satisfaction for provided services, depends on the situation, user characteristics, and user objectives in seeking the service. Vargo proposed Service Dominant Logic (SDL), which determines service value according to “value in use”. This concept illustrates the importance of the relationship between the service itself and its situation. This relationship is analogous to electro-magnetic field theory in physics. We developed the concept of service fields to create service value based on an analogy of the electro-magnetic field. By applying this concept to B to B collaboration, a model of service value co-creation in the collaboration can be formulated. Then, the collaboration can be described by 4 steps of KIKI model (Knowledge sharing related to service system, Identification of service field, Knowledge creation for new service idea, Implementation of service idea). As its application to B to B collaboration, the energy saving service business is reported to demonstrate the validity of the proposed collaboration model. This concept can be applied to make a collaboration process effective.

A proposed architecture for lecithin cholesterol acyl transferase (LCAT): identification of the catalytic triad and molecular modeling.

PubMed Central

Peelman, F.; Vinaimont, N.; Verhee, A.; Vanloo, B.; Verschelde, J. L.; Labeur, C.; Seguret-Mace, S.; Duverger, N.; Hutchinson, G.; Vandekerckhove, J.; Tavernier, J.; Rosseneu, M.

1998-01-01

The enzyme cholesterol lecithin acyl transferase (LCAT) shares the Ser/Asp-Glu/His triad with lipases, esterases and proteases, but the low level of sequence homology between LCAT and these enzymes did not allow for the LCAT fold to be identified yet. We, therefore, relied upon structural homology calculations using threading methods based on alignment of the sequence against a library of solved three-dimensional protein structures, for prediction of the LCAT fold. We propose that LCAT, like lipases, belongs to the alpha/beta hydrolase fold family, and that the central domain of LCAT consists of seven conserved parallel beta-strands connected by four alpha-helices and separated by loops. We used the conserved features of this protein fold for the prediction of functional domains in LCAT, and carried out site-directed mutagenesis for the localization of the active site residues. The wild-type enzyme and mutants were expressed in Cos-1 cells. LCAT mass was measured by ELISA, and enzymatic activity was measured on recombinant HDL, on LDL and on a monomeric substrate. We identified D345 and H377 as the catalytic residues of LCAT, together with F103 and L182 as the oxyanion hole residues. In analogy with lipases, we further propose that a potential "lid" domain at residues 50-74 of LCAT might be involved in the enzyme-substrate interaction. Molecular modeling of human LCAT was carried out using human pancreatic and Candida antarctica lipases as templates. The three-dimensional model proposed here is compatible with the position of natural mutants for either LCAT deficiency or Fish-eye disease. It enables moreover prediction of the LCAT domains involved in the interaction with the phospholipid and cholesterol substrates. PMID:9541390

Meeting the ONCHIT population health mandate: a proposed model for security in selective transportable distributed environments.

PubMed

Lorence, Daniel; Chin, John; Richards, Michael

2010-08-01

Goal Two of the US ONCHIT Plan focuses on enabling the use of electronic health information for critical health improvement activities that promote the health of targeted communities, and the US population as a whole. Because of the focus on communities and populations, the activities under this second goal differ fundamentally from those of the first goal, which focus on the care of individuals. Proposed here is a model for health information management in such population-based environments, which allows selective access and use of information, and maintains transportability while ensuring security and confidentiality.

Modeling-Mainstreaming: A Teacher Training Proposal.

ERIC Educational Resources Information Center

Bireley, Marlene; Mahan, Virginia

This document presents a learning model for training teachers to effectively deal with physically handicapped and mildly retarded children in their regular classroom. The modules are organized in the following fashion: Phase One; Development of an awareness of the concept of mainstreaming, of labels and their consequences, and of the psychological…

A proposed model for an optimal mentoring environment for medical residents: a literature review.

PubMed

Davis, Orin C; Nakamura, Jeanne

2010-06-01

To develop a model of the optimal mentoring environment for medical residents. The authors propose that such an environment is a function of a relationship that rests upon a set of interactional foundations that allow a protégé to capitalize on the strengths of the mentor, and it facilitates behaviors that will enable the protégé to develop and internalize the requisite knowledge, skills, and attitudes (KSAs) as fully as possible. The authors searched the literature using Web of Science and Google Scholar in 2007-2008 to identify articles addressing the mentoring process and the context in which it occurs (mentoring environment), and the effect both have on KSA development. The authors distilled the attributes of a good mentor that were consistent across the 20 papers that met inclusion criteria and described good mentoring of residents or curricula for training mentors or residents. The authors identified six interactional foundations that underlie the optimal mentoring relationship: emotional safety, support, protégé-centeredness, informality, responsiveness, and respect. These foundations enable protégés to engage in four key developmental behaviors: exercising independence, reflecting, extrapolating, and synthesizing. This model identifies mentoring practices that empower protégés to engage in developmental behaviors that will help them become the best physicians possible. Educators may use this model to develop training tools to teach attendings how to create an optimal mentoring environment. Researchers can use the model to help guide their future investigations of mentoring in medicine.

Three Proposed Data Collection Models for Annual Inventories

Treesearch

Bill Bechtold; Ron McRoberts; Frank Spirek; Chuck Liff

2005-01-01

Three competing data collection models for the U.S. Department of Agriculture Forest Service Forest Inventory and Analysis (FIA) program?s annual inventories are presented. We show that in the presence of panel creep, the model now in place does not meet requirements of an annual inventory system mandated by the 1998 Farm Bill. Two data-collection models that use...

A proposed simulation optimization model framework for emergency department problems in public hospital

NASA Astrophysics Data System (ADS)

Ibrahim, Ireen Munira; Liong, Choong-Yeun; Bakar, Sakhinah Abu; Ahmad, Norazura; Najmuddin, Ahmad Farid

2015-12-01

The Emergency Department (ED) is a very complex system with limited resources to support increase in demand. ED services are considered as good quality if they can meet the patient's expectation. Long waiting times and length of stay is always the main problem faced by the management. The management of ED should give greater emphasis on their capacity of resources in order to increase the quality of services, which conforms to patient satisfaction. This paper is a review of work in progress of a study being conducted in a government hospital in Selangor, Malaysia. This paper proposed a simulation optimization model framework which is used to study ED operations and problems as well as to find an optimal solution to the problems. The integration of simulation and optimization is hoped can assist management in decision making process regarding their resource capacity planning in order to improve current and future ED operations.

Proposed Method for Disaggregation of Secondary Data: The Model for External Reliance of Localities in the Coastal Management Zone (MERLIN-CMZ)

EPA Science Inventory

The Model for External Reliance of Localities In (MERLIN) Coastal Management Zones is a proposed solution to allow scaling of variables to smaller, nested geographies. Utilizing a Principal Components Analysis and data normalization techniques, smaller scale trends are linked to ...

Temporal profile of inflammatory response to fracture and hemorrhagic shock: Proposal of a novel long-term survival murine multiple trauma model.

PubMed

Kleber, Christian; Becker, Christopher A; Malysch, Tom; Reinhold, Jens M; Tsitsilonis, Serafeim; Duda, Georg N; Schmidt-Bleek, Katharina; Schaser, Klaus D

2015-07-01

Hemorrhagic shock (hS) interacts with the posttraumatic immune response and fracture healing in multiple trauma. Due to the lack of a long-term survival multiple trauma animal models, no standardized analysis of fracture healing referring the impact of multiple trauma on fracture healing was performed. We propose a new long-term survival (21 days) murine multiple trauma model combining hS (microsurgical cannulation of carotid artery, withdrawl of blood and continuously blood pressure measurement), femoral (osteotomy/external fixation) and tibial fracture (3-point bending technique/antegrade nail). The posttraumatic immune response was measured via IL-6, sIL-6R ELISA. The hS was investigated via macrohemodynamics, blood gas analysis, wet-dry lung ration and histologic analysis of the shock organs. We proposed a new murine long-term survival (21 days) multiple trauma model mimicking clinical relevant injury patterns and previously published human posttraumatic immune response. Based on blood gas analysis and histologic analysis of shock organs we characterized and standardized our murine multiple trauma model. Furthermore, we revealed hemorrhagic shock as a causative factor that triggers sIL-6R formation underscoring the fundamental pathophysiologic role of the transsignaling mechanism in multiple trauma. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

Anatomy of health care reform proposals.

PubMed Central

Soffel, D; Luft, H S

1993-01-01

The current proliferation of proposals for health care reform makes it difficult to sort out the differences among plans and the likely outcome of different approaches to reform. The current health care system has two basic features. The first, enrollment and eligibility functions, includes how people get into the system and gain coverage for health care services. We describe 4 models, ranging from an individual, voluntary approach to a universal, tax-based model. The second, the provision of health care, includes how physician services are organized, how they are paid for, what mechanisms are in place for quality assurance, and the degree of organization and oversight of the health care system. We describe 7 models of the organization component, including the current fee-for-service system with no national health budget, managed care, salaried providers under a budget, and managed competition with and without a national health budget. These 2 components provide the building blocks for health care plans, presented as a matrix. We also evaluate several reform proposals by how they combine these 2 elements. PMID:8273344

Intelligence Fusion Modeling. A Proposed Approach.

DTIC Science & Technology

1983-09-16

based techniques developed by artificial intelligence researchers. This paper describes the application of these techniques in the modeling of an... intelligence requirements, although the methods presented are applicable . We treat PIR/IR as given. -7- -- -W V"W v* 1.- . :71.,v It k*~ ~-- Movement...items from the PIR/IR/HVT decomposition are received from the CMDS. Formatted tactical intelligence reports are received from sensors of like types

Investigating a Proposed Model of Social Competence in Children With Traumatic Brain Injuries

PubMed Central

Rubin, Kenneth H.; Dennis, Maureen; Taylor, H. Gerry; Stancin, Terry; Gerhardt, Cynthia A.; Vannatta, Kathryn; Bigler, Erin D.; Yeates, Keith Owen

2016-01-01

Objective The goal of the current study was to test a proposed model of social competence for children who have suffered a traumatic brain injury (TBI). We hypothesized that both peer and teacher reports of social behavior would mediate the relation between intraindividual characteristics (e.g., executive function) and peer acceptance. Methods Participants were 52 children with TBI (M age = 10.29; M time after injury: 2.46 years). Severity of TBI ranged from complicated mild to severe. Classroom and laboratory measures were used to assess executive function, social behavior, and peer acceptance. Results Analyses revealed that peer reports of social behavior were a better mediator than teacher reports of the associations between executive function, social behaviors, and peer acceptance. Discussion The results underscore the importance of including peer reports of social behavior when developing interventions designed to improve the social, emotional, and behavioral outcomes of children with TBI. PMID:26374864

Transonic Aerodynamic Characteristics of a Model of a Proposed Six-Engine Hull-Type Seaplane Designed for Supersonic Flight

NASA Technical Reports Server (NTRS)

Wornom, Dewey E.

1960-01-01

Force tests of a model of a proposed six-engine hull-type seaplane were performed in the Langley 8-foot transonic pressure tunnel. The results of these tests have indicated that the model had a subsonic zero-lift drag coefficient of 0.0240 with the highest zero-lift drag coefficient slightly greater than twice the subsonic drag level. Pitchup tendencies were noted for subsonic Mach numbers at relatively high lift coefficients. Wing leading-edge droop increased the maximum lift-drag ratio approximately 8 percent at a Mach number of 0.80 but this effect was negligible at a Mach number of 0.90 and above. The configuration exhibited stable lateral characteristics over the test Mach number range.

Applicability of the Proposed Japanese Model for the Classification of Gastric Cancer Location: The "PROTRADIST" Retrospective Study.

PubMed

Marano, Luigi; Petrillo, Marianna; Pezzella, Modestino; Patriti, Alberto; Braccio, Bartolomeo; Esposito, Giuseppe; Grassia, Michele; Romano, Angela; Torelli, Francesco; De Luca, Raffaele; Fabozzi, Alessio; Falco, Giuseppe; Di Martino, Natale

2017-06-01

The extension of lymphadenectomy for surgical treatment of gastric cancer remains discordant among European and Japanese surgeons. Kinami et al. (Kinami S, Fujimura T, Ojima E, et al. PTD classification: proposal for a new classification of gastric cancer location based on physiological lymphatic flow. Int. J. Clin. Oncol. 2008;13:320-329) proposed a new experimental classification, the "Proximal zone, Transitional zone, Distal zone" (PTD) classification, based on the physiological lymphatic flow of gastric cancer site. The aim of the present retrospective study is to assess the applicability of PTD Japanese model in gastric cancer patients of our Western surgical department. Two groups of patients with histologically documented adenocarcinoma of the stomach were retrospectively obtained: In the first group were categorized 89 patients with T1a-T1b tumor invasion; and in the second group were 157 patients with T2-T3 category. The data collected were then categorized according to the PTD classification. In the T1a-T1b group there were no lymph node metastases within the r-GA or r-GEA compartments for tumors located in the P portion, and similarly there were no lymphatic metastases within the l-GEA or p-GA compartments for tumors located in the D portion. On the contrary, in the T2-T3 group the lymph node metastases presented a diffused spreading with no statistical significance between the two classification models. Our results show that the PTD classification based on physiological lymphatic flow of the gastric cancer site is a more physiological and clinical version than the Upper, Medium And Lower classification. It represents a valuable and applicable model of cancer location that could be a guide to a tailored surgical approach in Italian patients with neoplasm confined to submucosa. Nevertheless, in order to confirm our findings, larger and prospective studies are needed.

Cigarette Smoking and Depression Comorbidity: Systematic Review & Proposed Theoretical Model

PubMed Central

Mathew, Amanda R.; Hogarth, Lee; Leventhal, Adam M.; Cook, Jessica W.; Hitsman, Brian

2016-01-01

Background and Aims Despite decades of research on co-occurring smoking and depression, cessation rates remain consistently lower for depressed smokers than for smokers in the general population, highlighting the need for theory-driven models of smoking and depression. This paper provides a systematic review with a particular focus on psychological states that disproportionately motivate smoking in depression, and frame an incentive learning theory account of smoking-depression co-occurrence. Methods We searched PubMed, Scopus, PsychINFO, and CINAHL through December 2014, which yielded 852 articles. Using pre-established eligibility criteria, we identified papers focused on clinical issues and motivational mechanisms underlying smoking in established, adult smokers (i.e., maintenance, quit attempts, and cessation/relapse) with elevated symptoms of depression. Two reviewers independently determined whether articles met review criteria. We included 297 articles in qualitative synthesis. Results Our review identified three primary mechanisms that underlie persistent smoking among depressed smokers: low positive affect, high negative affect, and cognitive impairment. We propose a novel application of incentive learning theory which posits that depressed smokers experience greater increases in the expected value of smoking in the face of these three motivational states, which promotes goal-directed choice of smoking behavior over alternative actions. Conclusions The incentive learning theory accounts for current evidence on how depression primes smoking behavior and provides a unique framework for conceptualizing psychological mechanisms of smoking maintenance among depressed smokers. Treatment should focus on correcting adverse internal states, and beliefs about the high value of smoking in those states, to improve cessation outcomes for depressed smokers. PMID:27628300

Computer evaluation of existing and proposed fire lookouts

Treesearch

Romain M. Mees

1976-01-01

A computer simulation model has been developed for evaluating the fire detection capabilities of existing and proposed lookout stations. The model uses coordinate location of fires and lookouts, tower elevation, and topographic data to judge location of stations, and to determine where a fire can be seen. The model was tested by comparing it with manual detection on a...

SATWG networked quality function deployment

NASA Technical Reports Server (NTRS)

Brown, Don

1992-01-01

The initiative of this work is to develop a cooperative process for continual evolution of an integrated, time phased avionics technology plan that involves customers, technologists, developers, and managers. This will be accomplished by demonstrating a computer network technology to augment the Quality Function Deployment (QFD). All results are presented in viewgraph format.

Proposed best modeling practices for assessing the effects of ecosystem restoration on fish

USGS Publications Warehouse

Rose, Kenneth A; Sable, Shaye; DeAngelis, Donald L.; Yurek, Simeon; Trexler, Joel C.; Graf, William L.; Reed, Denise J.

2015-01-01

Large-scale aquatic ecosystem restoration is increasing and is often controversial because of the economic costs involved, with the focus of the controversies gravitating to the modeling of fish responses. We present a scheme for best practices in selecting, implementing, interpreting, and reporting of fish modeling designed to assess the effects of restoration actions on fish populations and aquatic food webs. Previous best practice schemes that tended to be more general are summarized, and they form the foundation for our scheme that is specifically tailored for fish and restoration. We then present a 31-step scheme, with supporting text and narrative for each step, which goes from understanding how the results will be used through post-auditing to ensure the approach is used effectively in subsequent applications. We also describe 13 concepts that need to be considered in parallel to these best practice steps. Examples of these concepts include: life cycles and strategies; variability and uncertainty; nonequilibrium theory; biological, temporal, and spatial scaling; explicit versus implicit representation of processes; and model validation. These concepts are often not considered or not explicitly stated and casual treatment of them leads to mis-communication and mis-understandings, which in turn, often underlie the resulting controversies. We illustrate a subset of these steps, and their associated concepts, using the three case studies of Glen Canyon Dam on the Colorado River, the wetlands of coastal Louisiana, and the Everglades. Use of our proposed scheme will require investment of additional time and effort (and dollars) to be done effectively. We argue that such an investment is well worth it and will more than pay back in the long run in effective and efficient restoration actions and likely avoided controversies and legal proceedings.

Evaluating Instructional Design Models: A Proposed Research Approach

ERIC Educational Resources Information Center

Gropper, George L.

2015-01-01

Proliferation of prescriptive models in an "engineering" field is not a sign of its maturity. Quite the opposite. Materials engineering, for example, meets the criterion of parsimony. Sadly, the very large number of models in "instructional design," putatively an engineering field, raises questions about its status. Can the…

Non-ablative hyperthermic mesenchymal regeneration: a proposed mechanism of action based on the Vivev model

NASA Astrophysics Data System (ADS)

Vos, Jeffrey A.; Livengood, Ryan H.; Jessop, Morris; Coad, James E.

2011-03-01

Novel non-ablative hyperthermic medical devices are currently being developed, in association with cryogen surface cooling, to rejuvenate tissues without collagen scarring. These devices have been designed to remodel skin, manage urinary stress incontinence, and more recently, treat vaginal laxity. In contrast to the thermal injury and reparative healing associated with higher energy ablation systems, these lower energy non-ablative systems are designed to subtly modify the collagen, stimulate the fibroblasts, and maintain a functional tissue architecture that subsequently promotes tissue rejuvenation and restoration. While these devices have primarily relied on clinical outcome questionnaires and satisfaction surveys to establish efficacy, a physiologic explanation for the induced tissue changes and tightening has not been well documented. Recent histology studies, using the Viveve ovine vaginal treatment model, have identified changes that propose both a mechanism of action and a tissue remodeling timeline for such non-ablative hyperthermic devices. The Viveve model results are consistent with subtle connective tissue changes leading to fibroblast stimulation and subsequent collagen replacement and augmentation. Unlike tissue ablation devices that cause thermal necrosis, these non-ablative devices renew the targeted tissue without dense collagenous scarring over a period of 3 or more months. The spectrum of histologic findings, as illustrated in the Viveve ovine vaginal model, further support the previously documented safety and efficacy profiles for low-dose non-ablative hyperthermic devices that rejuvenate and tighten submucosal tissues.

Evaluation of the existing triple point path models with new experimental data: proposal of an original empirical formulation

NASA Astrophysics Data System (ADS)

Boutillier, J.; Ehrhardt, L.; De Mezzo, S.; Deck, C.; Magnan, P.; Naz, P.; Willinger, R.

2018-03-01

With the increasing use of improvised explosive devices (IEDs), the need for better mitigation, either for building integrity or for personal security, increases in importance. Before focusing on the interaction of the shock wave with a target and the potential associated damage, knowledge must be acquired regarding the nature of the blast threat, i.e., the pressure-time history. This requirement motivates gaining further insight into the triple point (TP) path, in order to know precisely which regime the target will encounter (simple reflection or Mach reflection). Within this context, the purpose of this study is to evaluate three existing TP path empirical models, which in turn are used in other empirical models for the determination of the pressure profile. These three TP models are the empirical function of Kinney, the Unified Facilities Criteria (UFC) curves, and the model of the Natural Resources Defense Council (NRDC). As discrepancies are observed between these models, new experimental data were obtained to test their reliability and a new promising formulation is proposed for scaled heights of burst ranging from 24.6-172.9 cm/kg^{1/3}.

75 FR 57304 - Periodic Reporting Proposals

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-20

.... Proposal Seven would introduce a mailflow-based model of mail processing costs for Standard Mail Parcels... and invites public comment. DATES: Comments are due October 8, 2010. FOR FURTHER INFORMATION CONTACT: Stephen L. Sharfman, General Counsel, [email protected] or 202-789-6820. SUPPLEMENTARY INFORMATION...

Proposed Hydrodynamic Model Increases the Ability of Land-Surface Models to Capture Intra-Daily Dynamics of Transpiration and Canopy Structure Effects

NASA Astrophysics Data System (ADS)

Matheny, A. M.; Bohrer, G.; Mirfenderesgi, G.; Schafer, K. V.; Ivanov, V. Y.

2014-12-01

Hydraulic limitations are known to control transpiration in forest ecosystems when the soil is drying or when the vapor pressure deficit between the air and stomata is very large, but they can also impact stomatal apertures under conditions of adequate soil moisture and lower evaporative demand. We use the NACP dataset of latent heat flux measurements and model observations for multiple sites and models to demonstrate models' difficulties in capturing intra-daily hysteresis. We hypothesize that this is a result of un-resolved afternoon stomata closure due to hydrodynamic stresses. The current formulations for stomatal conductance and the empirical coupling between stomatal conductance and soil moisture used by these models does not resolve the hydrodynamic process of water movement from the soil to the leaves. This approach does not take advantage of advances in our understanding of water flow and storage in the trees, or of tree and canopy structure. A more thorough representation of the tree-hydrodynamic processes could potentially remedy this significant source of model error. In a forest plot at the University of Michigan Biological Station, we use measurements of sap flux and leaf water potential to demonstrate that trees of similar type - late successional deciduous trees - have very different hydrodynamic strategies that lead to differences in their temporal patterns of stomatal conductance and thus hysteretic cycles of transpiration. These differences will lead to large differences in conductance and water use based on the species composition of the forest. We also demonstrate that the size and shape of the tree branching system leads to differences in extent of hydrodynamic stress, which may change the forest respiration patterns as the forest grows and ages. We propose a framework to resolve tree hydrodynamics in global and regional models based on the Finite-Elements Tree-Crown Hydrodynamics model (FETCH) -a hydrodynamic model that can resolve the fast

A Proposed Curriculum Model for Geriatric Optometry.

ERIC Educational Resources Information Center

Rosenbloom, Albert A.

1985-01-01

A model for a geriatric optometry curriculum that defines key content areas and addresses the values essential for effective practice and basic therapeutic modalities used in treatment regimens with older adults is outlined. (MSE)

Advances in Quantum Trajectory Approaches to Dynamics

NASA Astrophysics Data System (ADS)

Askar, Attila

2001-03-01

The quantum fluid dynamics (QFD) formulation is based on the separation of the amplitude and phase of the complex wave function in Schrodinger's equation. The approach leads to conservation laws for an equivalent "gas continuum". The Lagrangian [1] representation corresponds to following the particles of the fluid continuum, i. e. calculating "quantum trajectories". The Eulerian [2] representation on the other hand, amounts to observing the dynamics of the gas continuum at the points of a fixed coordinate frame. The combination of several factors leads to a most encouraging computational efficiency. QFD enables the numerical analysis to deal with near monotonic amplitude and phase functions. The Lagrangian description concentrates the computation effort to regions of highest probability as an optimal adaptive grid. The Eulerian representation allows the study of multi-coordinate problems as a set of one-dimensional problems within an alternating direction methodology. An explicit time integrator limits the increase in computational effort with the number of discrete points to linear. Discretization of the space via local finite elements [1,2] and global radial functions [3] will be discussed. Applications include wave packets in four-dimensional quadratic potentials and two coordinate photo-dissociation problems for NOCl and NO2. [1] "Quantum fluid dynamics (QFD) in the Lagrangian representation with applications to photo-dissociation problems", F. Sales, A. Askar and H. A. Rabitz, J. Chem. Phys. 11, 2423 (1999) [2] "Multidimensional wave-packet dynamics within the fluid dynamical formulation of the Schrodinger equation", B. Dey, A. Askar and H. A. Rabitz, J. Chem. Phys. 109, 8770 (1998) [3] "Solution of the quantum fluid dynamics equations with radial basis function interpolation", Xu-Guang Hu, Tak-San Ho, H. A. Rabitz and A. Askar, Phys. Rev. E. 61, 5967 (2000)

Towards Total Quality Management in Universities: Quality Function Deployment Paradigm and Beyond

ERIC Educational Resources Information Center

Al-Fuqaha, Isam Najib

2014-01-01

This paper is an endeavor to develop a customised and computerized matrix of Quality Function Deployment paradigm (QFD) that has been applied in industry, with the aim of probing quality assurance and enhancement in Universities. Results of testing the new matrix proved that, it is efficient and time-saving while compared with a detailed field…

Listening to the Voice of the Customer.

ERIC Educational Resources Information Center

Schauerman, Sam; And Others

One of the major tenets of Total Quality Management (TQM) is that organizations need to adopt a strong customer focus. At El Camino College (ECC) in Torrance, California, a matrix was developed to identify and describe ECC's direct and indirect internal and external customers. ECC then applied Quality Function Deployment (QFD), a strategic tool…

Evaluating the effectiveness of implementing quality management practices in the medical industry.

PubMed

Yeh, T-M; Lai, H-P

2015-01-01

To discuss the effectiveness of 30 quality management practices (QMP) including Strategic Management, Balanced ScoreCard, Knowledge Management, and Total Quality Management in the medical industry. A V-shaped performance evaluation matrix is applied to identify the top ten practices that are important but not easy to use or implement. Quality Function Deployment (QFD) is then utilized to find key factors to improve the implementation of the top ten tools. The questionnaires were sent to the nursing staff and administrators in a hospital through e-mail and posts. A total of 250 copies were distributed and 217 copies were valid. The importance, easiness, and achievement (i.e., implementation level) of 30 quality management practices were used. Key factors for QMP implementation were sequenced in order of importance as top management involvement, inter-department communication and coordination, teamwork, hospital-wide participation, education and training, consultant professionalism, continuous internal auditing, computerized process, and incentive compensation. Top management can implement the V-shaped performance matrix to determine whether quality management practices need improvement and if so, utilize QFD to find the key factors for improvement.

Automating Construction of Machine Learning Models With Clinical Big Data: Proposal Rationale and Methods

PubMed Central

Stone, Bryan L; Johnson, Michael D; Tarczy-Hornoch, Peter; Wilcox, Adam B; Mooney, Sean D; Sheng, Xiaoming; Haug, Peter J; Nkoy, Flory L

2017-01-01

Background To improve health outcomes and cut health care costs, we often need to conduct prediction/classification using large clinical datasets (aka, clinical big data), for example, to identify high-risk patients for preventive interventions. Machine learning has been proposed as a key technology for doing this. Machine learning has won most data science competitions and could support many clinical activities, yet only 15% of hospitals use it for even limited purposes. Despite familiarity with data, health care researchers often lack machine learning expertise to directly use clinical big data, creating a hurdle in realizing value from their data. Health care researchers can work with data scientists with deep machine learning knowledge, but it takes time and effort for both parties to communicate effectively. Facing a shortage in the United States of data scientists and hiring competition from companies with deep pockets, health care systems have difficulty recruiting data scientists. Building and generalizing a machine learning model often requires hundreds to thousands of manual iterations by data scientists to select the following: (1) hyper-parameter values and complex algorithms that greatly affect model accuracy and (2) operators and periods for temporally aggregating clinical attributes (eg, whether a patient’s weight kept rising in the past year). This process becomes infeasible with limited budgets. Objective This study’s goal is to enable health care researchers to directly use clinical big data, make machine learning feasible with limited budgets and data scientist resources, and realize value from data. Methods This study will allow us to achieve the following: (1) finish developing the new software, Automated Machine Learning (Auto-ML), to automate model selection for machine learning with clinical big data and validate Auto-ML on seven benchmark modeling problems of clinical importance; (2) apply Auto-ML and novel methodology to two new

Black Hole on a Chip: Proposal for a Physical Realization of the Sachdev-Ye-Kitaev model in a Solid-State System

NASA Astrophysics Data System (ADS)

Pikulin, D. I.; Franz, M.

2017-07-01

A system of Majorana zero modes with random infinite-range interactions—the Sachdev-Ye-Kitaev (SYK) model—is thought to exhibit an intriguing relation to the horizons of extremal black holes in two-dimensional anti-de Sitter space. This connection provides a rare example of holographic duality between a solvable quantum-mechanical model and dilaton gravity. Here, we propose a physical realization of the SYK model in a solid-state system. The proposed setup employs the Fu-Kane superconductor realized at the interface between a three-dimensional topological insulator and an ordinary superconductor. The requisite N Majorana zero modes are bound to a nanoscale hole fabricated in the superconductor that is threaded by N quanta of magnetic flux. We show that when the system is tuned to the surface neutrality point (i.e., chemical potential coincident with the Dirac point of the topological insulator surface state) and the hole has sufficiently irregular shape, the Majorana zero modes are described by the SYK Hamiltonian. We perform extensive numerical simulations to demonstrate that the system indeed exhibits physical properties expected of the SYK model, including thermodynamic quantities and two-point as well as four-point correlators, and discuss ways in which these can be observed experimentally.

Proposed Model for Translational Research at a Teaching-Intensive College of Pharmacy.

PubMed

Ulrich, Erin; Grady, Sarah; Vonderhaar, Jacqueline; Ruplin, Andrew

2017-08-08

Many American colleges of pharmacy are small, private, teaching institutions. Faculty are required to maintain a research agenda, although the publication quota is less compared with their publicly funded college of pharmacy peers. Faculty at these smaller schools conduct research with very little internal or external funding. This tends to lead to smaller, less impactful research findings. Translational research is becoming popular for research faculty as it bridges theory to practice. The Knowledge-to-Action (KTA) framework presents the steps to conduct translational research. To apply and determine if the KTA framework would be able to produce practice-impactful research at an institution that does not depend on grant funding as part of faculty research agendas. An interdisciplinary team was formed with providers at the clinical faculty's practice site. As the team moved through the KTA steps, authors documented the roles of each team member. It was clear that many different types of teams were formed throughout the KTA process. These teams were then categorized according to the Interdisciplinary Teamwork System. The final result is a proposed model of types of teams and required member roles that are necessary within each KTA step for faculty to conduct practice-impactful research at a small, private, teaching institution without substantial grant funding awards. Applying the KTA framework, two impactful original research manuscripts were developed over two academic years. Furthermore, the practitioners at the clinical faculty member's site were very pleased with the ease of conducting research, as they were never required to take a lead role. In addition, both faculty members alternated lead and support role allowing for a decreased burden of workload while producing theory-driven research. The KTA framework can create a model for translational research and may be particularly beneficial to small teaching institutions to conduct impactful research. Copyright �

A finite-element model study of the impact of the proposed I-326 crossing on flood stages of the Congaree River near Columbia, South Carolina

USGS Publications Warehouse

Lee, J.K.; Bennett, C. S.

1981-01-01

A two-dimensional finite element surface water model was used to study the hydraulic impact of the proposed Interstate Route 326 crossing of the Congaree River near Columbia, SC. The finite element model was assessed as a potential operational tool for analyzing complex highway crossings and other modifications of river flood plains. Infrared aerial photography was used to define regions of homogeneous roughness in the flood plain. Finite element networks approximating flood plain topography were designed using elements of three roughness types. High water marks established during an 8-yr flood that occurred in October 1976 were used to calibrate the model. The maximum flood of record, an approximately 100-yr flood that occurred in August 1908, was modeled in three cases: dikes on the right bank, dikes on the left bank, and dikes on both banks. In each of the three cases, simulations were performed both without and with the proposed highway embankments in place. Detailed information was obtained about backwater effects upstream from the proposed highway embankments, changes in flow distribution resulting from the embankments, and local velocities in the bridge openings. On the basis of results from the model study, the South Carolina Department of Highways and Public Transportation changed the design of several bridge openings. A simulation incorporating the new design for the case with dikes on the left bank indicated that both velocities in the bridge openings and backwater were reduced. A major problem in applying the model was the difficulty in predicting the network detail necessary to avoid local errors caused by roughness discontinuities and large depth gradients. (Lantz-PTT)

Evaluation of genotype x environment interactions in cotton using the method proposed by Eberhart and Russell and reaction norm models.

PubMed

Alves, R S; Teodoro, P E; Farias, F C; Farias, F J C; Carvalho, L P; Rodrigues, J I S; Bhering, L L; Resende, M D V

2017-08-17

Cotton produces one of the most important textile fibers of the world and has great relevance in the world economy. It is an economically important crop in Brazil, which is the world's fifth largest producer. However, studies evaluating the genotype x environment (G x E) interactions in cotton are scarce in this country. Therefore, the goal of this study was to evaluate the G x E interactions in two important traits in cotton (fiber yield and fiber length) using the method proposed by Eberhart and Russell (simple linear regression) and reaction norm models (random regression). Eight trials with sixteen upland cotton genotypes, conducted in a randomized block design, were used. It was possible to identify a genotype with wide adaptability and stability for both traits. Reaction norm models have excellent theoretical and practical properties and led to more informative and accurate results than the method proposed by Eberhart and Russell and should, therefore, be preferred. Curves of genotypic values as a function of the environmental gradient, which predict the behavior of the genotypes along the environmental gradient, were generated. These curves make possible the recommendation to untested environmental levels.

BLAM (Benthic Light Availability Model): A Proposed Model of Hydrogeomorphic Controls on Light in Rivers

NASA Astrophysics Data System (ADS)

Julian, J. P.; Doyle, M. W.; Stanley, E. H.

2006-12-01

Light is vital to the dynamics of aquatic ecosystems. It drives photosynthesis and photochemical reactions, affects thermal structure, and influences behavior of aquatic biota. Despite the fundamental role of light to riverine ecosystems, light studies in rivers have been mostly neglected because i) boundary conditions (e.g., banks, riparian vegetation) make ambient light measurements difficult, and ii) the optical water quality of rivers is highly variable and difficult to characterize. We propose a benthic light availability model (BLAM) that predicts the percent of incoming photosynthetically active radiation (PAR) available at the river bed. BLAM was developed by quantifying light attenuation of the five hydrogeomorphic controls that dictate riverine light availability: topography, riparian vegetation, channel geometry, optical water quality, and water depth. BLAM was calibrated using hydrogeomorphic data and light measurements from two rivers: Deep River - a 5th-order, turbid river in central North Carolina, and Big Spring Creek - a 2nd-order, optically clear stream in central Wisconsin. We used a series of four PAR sensors to measure i) above-canopy PAR, ii) PAR above water surface, iii) PAR below water surface, and iv) PAR on stream bed. These measurements were used to develop empirical light attenuation coefficients, which were then used in combination with optical water quality measurements, shading analyses, channel surveys, and flow records to quantify the spatial and temporal variability in riverine light availability. Finally, we apply BLAM to the Baraboo River - a 6th-order, 120-mile, unimpounded river in central Wisconsin - in order to characterize light availability along the river continuum (from headwaters to mouth).

Futility Disputes: A Review of the Literature and Proposed Model for Dispute Navigation Through Trust Building.

PubMed

Leland, Brian D; Torke, Alexia M; Wocial, Lucia D; Helft, Paul R

2017-10-01

Futility disputes in the intensive care unit setting have received significant attention in the literature over the past several years. Although the idea of improving communication in an attempt to resolve these challenging situations has been regularly discussed, the concept and role of trust building as the means by which communication improves and disputes are best navigated is largely absent. We take this opportunity to review the current literature on futility disputes and argue the important role of broken trust in these encounters, highlighting current evidence establishing the necessity and utility of trust in both medical decision-making and effective communication. Finally, we propose a futility dispute navigation model built upon improved communication through trust building.

75 FR 27560 - Proposed Information Collection Activity; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-17

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Administration for Children and Families Proposed... LIHEAP and Detailed Model Plan. OMB No.: 0970-0075. Description: States, including the District of... annual application (Model Plan) that meets the LIHEAP statutory and regulatory requirements prior to...

Proposal and validation of a new model to estimate survival for hepatocellular carcinoma patients.

PubMed

Liu, Po-Hong; Hsu, Chia-Yang; Hsia, Cheng-Yuan; Lee, Yun-Hsuan; Huang, Yi-Hsiang; Su, Chien-Wei; Lee, Fa-Yauh; Lin, Han-Chieh; Huo, Teh-Ia

2016-08-01

The survival of hepatocellular carcinoma (HCC) patients is heterogeneous. We aim to develop and validate a simple prognostic model to estimate survival for HCC patients (MESH score). A total of 3182 patients were randomised into derivation and validation cohort. Multivariate analysis was used to identify independent predictors of survival in the derivation cohort. The validation cohort was employed to examine the prognostic capabilities. The MESH score allocated 1 point for each of the following parameters: large tumour (beyond Milan criteria), presence of vascular invasion or metastasis, Child-Turcotte-Pugh score ≥6, performance status ≥2, serum alpha-fetoprotein level ≥20 ng/ml, and serum alkaline phosphatase ≥200 IU/L, with a maximal of 6 points. In the validation cohort, significant survival differences were found across all MESH scores from 0 to 6 (all p < 0.01). The MESH system was associated with the highest homogeneity and lowest corrected Akaike information criterion compared with Barcelona Clínic Liver Cancer, Hong Kong Liver Cancer (HKLC), Cancer of the Liver Italian Program, Taipei Integrated Scoring and model to estimate survival in ambulatory HCC Patients systems. The prognostic accuracy of the MESH scores remained constant in patients with hepatitis B- or hepatitis C-related HCC. The MESH score can also discriminate survival for patients from early to advanced stages of HCC. This newly proposed simple and accurate survival model provides enhanced prognostic accuracy for HCC. The MESH system is a useful supplement to the BCLC and HKLC classification schemes in refining treatment strategies. Copyright © 2016 Elsevier Ltd. All rights reserved.

Multiscale Model Simulations of Temperature and Relative Humidity for the License Application of the Proposed Yucca Mountain Repository

NASA Astrophysics Data System (ADS)

Buscheck, T.; Glascoe, L.; Sun, Y.; Gansemer, J.; Lee, K.

2003-12-01

For the proposed Yucca Mountain geologic repository for high-level nuclear waste, the planned method of disposal involves the emplacement of cylindrical packages containing the waste inside horizontal tunnels, called emplacement drifts, bored several hundred meters below the ground surface. The emplacement drifts reside in highly fractured, partially saturated volcanic tuff. An important phenomenological consideration for the licensing of the proposed repository at Yucca Mountain is the generation of decay heat by the emplaced waste and the consequences of this decay heat. Changes in temperature will affect the hydrologic and chemical environment at Yucca Mountain. A thermohydrologic-modeling tool is necessary to support the performance assessment of the Engineered Barrier System (EBS) of the proposed repository. This modeling tool must simultaneously account for processes occurring at a scale of a few tens of centimeters around individual waste packages, for processes occurring around the emplacement drifts themselves, and for processes occurring at the multi-kilometer scale of the mountain. Additionally, many other features must be considered including non-isothermal, multiphase-flow in fractured porous rock of variable liquid-phase saturation and thermal radiation and convection in open cavities. The Multiscale Thermohydrologic Model (MSTHM) calculates the following thermohydrologic (TH) variables: temperature, relative humidity, liquid-phase saturation, evaporation rate, air-mass fraction, gas-phase pressure, capillary pressure, and liquid- and gas-phase fluxes. The TH variables are determined as a function of position along each of the emplacement drifts in the repository and as a function of waste-package (WP) type. These variables are determined at various generic locations within the emplacement drifts, including the waste package and drip-shield surfaces and in the invert; they are also determined at various generic locations in the adjoining host rock

Search for Hidden Particles: a new experiment proposal

NASA Astrophysics Data System (ADS)

De Lellis, G.

2015-08-01

Searches for new physics with accelerators are being performed at the LHC, looking for high massive particles coupled to matter with ordinary strength. We propose a new experiment meant to search for very weakly coupled particles in the few GeV mass domain. The existence of such particles, foreseen in different models beyond the Standard Model, is largely unexplored from the experimental point of view. A beam dump facility, built at CERN in the north area, using 400 GeV protons is a copious factory of charmed hadrons and it could be used to probe the existence of such particles. The beam dump is also an ideal source of tau neutrinos, the less known particle in the Standard Model. In particular, tau anti-neutrinos have not been observed so far. We therefore propose an experiment to search for hidden particles and study tau neutrino physics at the same time.

Model Test of Proposed Loading Rates for Onsite Wastewater Treatment Systems

EPA Science Inventory

State regulatory agencies set standards for onsite wastewater treatment system (OWTS), commonly known as septic systems, based on expected hydraulic performance and nitrogen (N) treatment in soils of differing texture. In a previous study, hydraulic loading rates were proposed fo...

Face-seal lubrication: 1: Proposed and published models

NASA Technical Reports Server (NTRS)

Ludwig, L. P.

1976-01-01

The numerous published theories on the mechanism of hydrodynamic lubrication of face seals were reviewed. These theories employ either an inclined-slider-bearing macrogeometry or an inclined-slider-bearing microgeometry to produce hydrodynamic pressure that separates the surfaces of the primary seal. Secondary seal friction and primary ring inertia effects are not considered. Hypothetical seal operating models were devised to include secondary seal friction and primary ring inertia effects. It was hypothesized that these effects induce relative angular misalinement of the primary seal faces and that this misalinement is, in effect, an inclined slider macrogeometry. Stable running was postulated for some of these hypothetical operating models. In others, periodic loss of hydrodynamic lubrication was postulated to be possible with certain combinations of waviness and angular misalinement. Application of restrictions that apply to seal operation led to a hydrodynamic governing equation for the new model that is a two-dimensional, time-dependent Reynolds equation with the short-bearing approximation.

High-resolution Interferometric Observations of Nova RS Ophiuchi and a Proposed Unification Model for Persistent Dust Creation in Recurrent Novae

NASA Astrophysics Data System (ADS)

Barry, R. K.; Danchi, W. C.

2008-12-01

We review observations of nova RS Ophiuchi using long-baseline near-infrared and mid-infrared interferometry at three observatories: the Keck Interferometer in the Nulling mode (KIN), the Palomar Testbed Interferometer (PTI), and the Infrared and Optical Telescope Array (IOTA). We discuss these observations in the context of a unifying model of the system that includes an increase in density in the plane of the orbit of the two stars created by a spiral shock wave caused by the motion of the stars through the cool wind of the red giant star. We discuss how recent observations using the Spitzer Space Telescope and the VLTI support this proposed model.

Proposed Hydrodynamic Model Improves Resolution of Species-Specific Responses to Drought and Disturbance

NASA Astrophysics Data System (ADS)

Matheny, A. M.; Bohrer, G.; Fiorella, R.; Mirfenderesgi, G.

2015-12-01

Plant functional types in land surface models (LSMs) are broadly defined, and often represent species with different physiologies within the same category. For example, trees of opposing hydraulic strategies and traits are commonly grouped together, as is the case of red oak and red maple. As a result, LSMs generate typical patterns of errors in predictions of transpiration and production. We studied sap flux, stem water storage, stomatal conductance, photosynthesis, rooting depth, and bole growth of these species at disturbed and undisturbed field sites in Michigan. Species-specific differences significantly impact temporal patterns of stomatal conductance and overall transpiration responses to both drought and disturbance. During drought, maples relied heavily on stem-stored water, while oaks did not. After disturbance, oaks increased stomatal conductance while maple conductance declined. Isotopic analysis of xylem water revealed that oak roots can access a deep groundwater source, which maple roots cannot. This deep rooting strategy permits transpiration and growth to continue in oaks during periods of water limitation, even when maples cease transpiration. Using 16 years of bole growth data, we show that maple growth is strongly correlated with mean annual precipitation, yet oak growth is not. We propose a framework to incorporate these species-specific differences into LSMs using the Finite-Element Tree-Crown Hydrodynamics model version 2 (FETCH2) that resolves the fast dynamics and diurnal hysteresis of stomatal conductance at the tree level. FETCH2 uses atmospheric and biological forcings from the LSM, simulates water movement through trees as flow through a system of porous media conduits, and calculates realistic hydraulic restrictions to stomatal conductance. This model replaces the current, non-physical link which empirically connects soil moisture to stomatal conductance in LSMs. FETCH2 resolved transpiration is then easily scaled to the plot level

A proposed mathematical model for sleep patterning.

PubMed

Lawder, R E

1984-01-01

The simple model of a ramp, intersecting a triangular waveform, yields results which conform with seven generalized observations of sleep patterning; including the progressive lengthening of 'rapid-eye-movement' (REM) sleep periods within near-constant REM/nonREM cycle periods. Predicted values of REM sleep time, and of Stage 3/4 nonREM sleep time, can be computed using the observed values of other parameters. The distributions of the actual REM and Stage 3/4 times relative to the predicted values were closer to normal than the distributions relative to simple 'best line' fits. It was found that sleep onset tends to occur at a particular moment in the individual subject's '90-min cycle' (the use of a solar time-scale masks this effect), which could account for a subject with a naturally short sleep/wake cycle synchronizing to a 24-h rhythm. A combined 'sleep control system' model offers quantitative simulation of the sleep patterning of endogenous depressives and, with a different perturbation, qualitative simulation of the symptoms of narcolepsy.

Prioritization methodology for chemical replacement

NASA Technical Reports Server (NTRS)

Cruit, Wendy; Goldberg, Ben; Schutzenhofer, Scott

1995-01-01

Since United States of America federal legislation has required ozone depleting chemicals (class 1 & 2) to be banned from production, The National Aeronautics and Space Administration (NASA) and industry have been required to find other chemicals and methods to replace these target chemicals. This project was initiated as a development of a prioritization methodology suitable for assessing and ranking existing processes for replacement 'urgency.' The methodology was produced in the form of a workbook (NASA Technical Paper 3421). The final workbook contains two tools, one for evaluation and one for prioritization. The two tools are interconnected in that they were developed from one central theme - chemical replacement due to imposed laws and regulations. This workbook provides matrices, detailed explanations of how to use them, and a detailed methodology for prioritization of replacement technology. The main objective is to provide a GUIDELINE to help direct the research for replacement technology. The approach for prioritization called for a system which would result in a numerical rating for the chemicals and processes being assessed. A Quality Function Deployment (QFD) technique was used in order to determine numerical values which would correspond to the concerns raised and their respective importance to the process. This workbook defines the approach and the application of the QFD matrix. This technique: (1) provides a standard database for technology that can be easily reviewed, and (2) provides a standard format for information when requesting resources for further research for chemical replacement technology. Originally, this workbook was to be used for Class 1 and Class 2 chemicals, but it was specifically designed to be flexible enough to be used for any chemical used in a process (if the chemical and/or process needs to be replaced). The methodology consists of comparison matrices (and the smaller comparison components) which allow replacement technology

Engaging Struggling Adolescent Readers through Situational Interest: A Model Proposing the Relationships among Extrinsic Motivation, Oral Reading Proficiency, Comprehension, and Academic Achievement

ERIC Educational Resources Information Center

Paige, David D.

2011-01-01

Reading ability and motivation among adolescents across the country continues to be problematic, as only slightly more than one-third read at a proficient level (Grigg, Donahue, & Dion, 2007; Unrau & Schlackman, 2006). Hidi and Renninger (2006) have proposed a four-phase model of situational interest that suggests how activities involving…

Automating Construction of Machine Learning Models With Clinical Big Data: Proposal Rationale and Methods.

PubMed

Luo, Gang; Stone, Bryan L; Johnson, Michael D; Tarczy-Hornoch, Peter; Wilcox, Adam B; Mooney, Sean D; Sheng, Xiaoming; Haug, Peter J; Nkoy, Flory L

2017-08-29

To improve health outcomes and cut health care costs, we often need to conduct prediction/classification using large clinical datasets (aka, clinical big data), for example, to identify high-risk patients for preventive interventions. Machine learning has been proposed as a key technology for doing this. Machine learning has won most data science competitions and could support many clinical activities, yet only 15% of hospitals use it for even limited purposes. Despite familiarity with data, health care researchers often lack machine learning expertise to directly use clinical big data, creating a hurdle in realizing value from their data. Health care researchers can work with data scientists with deep machine learning knowledge, but it takes time and effort for both parties to communicate effectively. Facing a shortage in the United States of data scientists and hiring competition from companies with deep pockets, health care systems have difficulty recruiting data scientists. Building and generalizing a machine learning model often requires hundreds to thousands of manual iterations by data scientists to select the following: (1) hyper-parameter values and complex algorithms that greatly affect model accuracy and (2) operators and periods for temporally aggregating clinical attributes (eg, whether a patient's weight kept rising in the past year). This process becomes infeasible with limited budgets. This study's goal is to enable health care researchers to directly use clinical big data, make machine learning feasible with limited budgets and data scientist resources, and realize value from data. This study will allow us to achieve the following: (1) finish developing the new software, Automated Machine Learning (Auto-ML), to automate model selection for machine learning with clinical big data and validate Auto-ML on seven benchmark modeling problems of clinical importance; (2) apply Auto-ML and novel methodology to two new modeling problems crucial for care

Absenteeism in Undergraduate Business Education: A Proposed Model and Exploratory Investigation

ERIC Educational Resources Information Center

Burke, Lisa A.

2010-01-01

One issue in undergraduate business education remaining underexamined is student absenteeism. In this article, the literature on undergraduate absenteeism is reviewed culminating in a proposed conceptual framework to guide future research, and an exploratory investigation of management students' attitudes about absenteeism is conducted.…

Cigarette smoking and depression comorbidity: systematic review and proposed theoretical model.

PubMed

Mathew, Amanda R; Hogarth, Lee; Leventhal, Adam M; Cook, Jessica W; Hitsman, Brian

2017-03-01

Despite decades of research on co-occurring smoking and depression, cessation rates remain consistently lower for depressed smokers than for smokers in the general population, highlighting the need for theory-driven models of smoking and depression. This paper provides a systematic review with a particular focus upon psychological states that disproportionately motivate smoking in depression, and frame an incentive learning theory account of smoking-depression co-occurrence. We searched PubMed, Scopus, PsychINFO and CINAHL to December 2014, which yielded 852 papers. Using pre-established eligibility criteria, we identified papers focused on clinical issues and motivational mechanisms underlying smoking in established, adult smokers (i.e. maintenance, quit attempts and cessation/relapse) with elevated symptoms of depression. Two reviewers determined independently whether papers met review criteria. We included 297 papers in qualitative synthesis. Our review identified three primary mechanisms that underlie persistent smoking among depressed smokers: low positive affect, high negative affect and cognitive impairment. We propose a novel application of incentive learning theory which posits that depressed smokers experience greater increases in the expected value of smoking in the face of these three motivational states, which promotes goal-directed choice of smoking behavior over alternative actions. The incentive learning theory accounts for current evidence on how depression primes smoking behavior and provides a unique framework for conceptualizing psychological mechanisms of smoking maintenance among depressed smokers. Treatment should focus upon correcting adverse internal states and beliefs about the high value of smoking in those states to improve cessation outcomes for depressed smokers. © 2016 Society for the Study of Addiction.

B220 analysis with the local lymph node assay: proposal for a more flexible prediction model.

PubMed

Betts, Catherine J; Dearman, Rebecca J; Kimber, Ian; Ryan, Cindy A; Gerberick, G Frank; Lalko, Jon; Api, Anne Marie

2007-01-01

The mouse local lymph node assay (LLNA) has been developed and validated for the identification of chemicals that have the potential to induce skin sensitisation. In common with other predictive test methods the accuracy of the LLNA is not absolute and experience has revealed that a few chemicals, including for instance a minority of skin irritants, may elicit false-positive reactions in the assay. To improve further the performance of the LLNA, and to eliminate or reduce false-positives, there has been interest in an adjunct method in which the ability of chemicals to cause increases in the frequency of B220(+) lymphocytes in skin-draining lymph nodes is measured. Previous studies suggest that the use of B220 analyses aligned with the standard LLNA may serve to distinguish further between contact allergens and skin irritants. In the original predictive model, chemicals were regarded as being skin sensitisers if they were able to induce a 1.25-fold or greater increase in the percentage of B220(+) cells within lymph nodes compared with concurrent vehicle controls. Although this first prediction model has proven useful, in the light of more recent experience, and specifically as a consequence of some variability observed in the frequency of B220(+) lymphocytes in nodes taken from vehicle control-treated animals, it is timely now to reconsider and refine the model. As a result a new prediction model is proposed in which reliance on the use of absolute thresholds is reduced, and in which small changes in control values can be better accommodated. (c) 2007 John Wiley & Sons, Ltd.

[Acute kidney injury after pediatric cardiac surgery: risk factors and outcomes. Proposal for a predictive model].

PubMed

Cardoso, Bárbara; Laranjo, Sérgio; Gomes, Inês; Freitas, Isabel; Trigo, Conceição; Fragata, Isabel; Fragata, José; Pinto, Fátima

2016-02-01

To characterize the epidemiology and risk factors for acute kidney injury (AKI) after pediatric cardiac surgery in our center, to determine its association with poor short-term outcomes, and to develop a logistic regression model that will predict the risk of AKI for the study population. This single-center, retrospective study included consecutive pediatric patients with congenital heart disease who underwent cardiac surgery between January 2010 and December 2012. Exclusion criteria were a history of renal disease, dialysis or renal transplantation. Of the 325 patients included, median age three years (1 day-18 years), AKI occurred in 40 (12.3%) on the first postoperative day. Overall mortality was 13 (4%), nine of whom were in the AKI group. AKI was significantly associated with length of intensive care unit stay, length of mechanical ventilation and in-hospital death (p<0.01). Patients' age and postoperative serum creatinine, blood urea nitrogen and lactate levels were included in the logistic regression model as predictor variables. The model accurately predicted AKI in this population, with a maximum combined sensitivity of 82.1% and specificity of 75.4%. AKI is common and is associated with poor short-term outcomes in this setting. Younger age and higher postoperative serum creatinine, blood urea nitrogen and lactate levels were powerful predictors of renal injury in this population. The proposed model could be a useful tool for risk stratification of these patients. Copyright © 2015 Sociedade Portuguesa de Cardiologia. Published by Elsevier España. All rights reserved.

First molecular modeling report on novel arylpyrimidine kynurenine monooxygenase inhibitors through multi-QSAR analysis against Huntington's disease: A proposal to chemists!

PubMed

Amin, Sk Abdul; Adhikari, Nilanjan; Jha, Tarun; Gayen, Shovanlal

2016-12-01

Huntington's disease (HD) is caused by mutation of huntingtin protein (mHtt) leading to neuronal cell death. The mHtt induced toxicity can be rescued by inhibiting the kynurenine monooxygenase (KMO) enzyme. Therefore, KMO is a promising drug target to address the neurodegenerative disorders such as Huntington's diseases. Fiftysix arylpyrimidine KMO inhibitors are structurally explored through regression and classification based multi-QSAR modeling, pharmacophore mapping and molecular docking approaches. Moreover, ten new compounds are proposed and validated through the modeling that may be effective in accelerating Huntington's disease drug discovery efforts. Copyright © 2016 Elsevier Ltd. All rights reserved.

Investigating the empirical support for therapeutic targets proposed by the temporal experience of pleasure model in schizophrenia: A systematic review.

PubMed

Edwards, Clementine J; Cella, Matteo; Tarrier, Nicholas; Wykes, Til

2015-10-01

Anhedonia and amotivation are substantial predictors of poor functional outcomes in people with schizophrenia and often present a formidable barrier to returning to work or building relationships. The Temporal Experience of Pleasure Model proposes constructs which should be considered therapeutic targets for these symptoms in schizophrenia e.g. anticipatory pleasure, memory, executive functions, motivation and behaviours related to the activity. Recent reviews have highlighted the need for a clear evidence base to drive the development of targeted interventions. To review systematically the empirical evidence for each TEP model component and propose evidence-based therapeutic targets for anhedonia and amotivation in schizophrenia. Following PRISMA guidelines, PubMed and PsycInfo were searched using the terms "schizophrenia" and "anhedonia". Studies were included if they measured anhedonia and participants had a diagnosis of schizophrenia. The methodology, measures and main findings from each study were extracted and critically summarised for each TEP model construct. 80 independent studies were reviewed and executive functions, emotional memory and the translation of motivation into actions are highlighted as key deficits with a strong evidence base in people with schizophrenia. However, there are many relationships that are unclear because the empirical work is limited by over-general tasks and measures. Promising methods for research which have more ecological validity include experience sampling and behavioural tasks assessing motivation. Specific adaptations to Cognitive Remediation Therapy, Cognitive Behavioural Therapy and the utilisation of mobile technology to enhance representations and emotional memory are recommended for future development. Copyright © 2015. Published by Elsevier B.V.

[Proposed model of vascular trauma by mean of mechanical characterization of endovascular prostheses (stents) based on structural analysis by FEA].

PubMed

Bustamante, John; Uribe, Pablo; Sosa, Mauricio; Valencia, Raúl

2016-01-01

The accumulated evidence on angioplasty techniques with stents has raised a controversy about the factors that influence the final vascular response. Indeed, several studies have shown there might be re-stenosis between 30% to 40% about 6 months after placement, relating to the design of the device as one of the main causes. This paper proposes the functional characterization of endovascular stents, analyzing its mechanical influence in the vascular system and predicting implicit traumatic factors in the vessel. A structural analysis was made for several computational models of endovascular stents using Finite Element Analysis in order to predict the mechanical behavior and the vascular trauma. In this way, the stents were considered as tubular devices composed of multiple links under radial pressure loads, reflecting stress concentration effects. The analysis allowed to visualize how the geometry of stents is adjusted under several load conditions, in order to obtain the response of "solid-solid" interaction between the stent and the arterial wall. Thus, an analysis was performed in order to calculate stress, and a conceptual model that explains its mechanical impact on the stent-vessel interaction, was raised, to infer on the functionality from the design of the devices. The proposed conceptual model allows to determine the relationship between the conditions of mechanical interaction of the stents, and warns about the effects in what would be the operation of the device on the vascular environment. Copyright © 2016 Instituto Nacional de Cardiología Ignacio Chávez. Publicado por Masson Doyma México S.A. All rights reserved.

Proposal of a model of mammalian neural induction

PubMed Central

Levine, Ariel J.; Brivanlou, Ali H.

2009-01-01

How does the vertebrate embryo make a nervous system? This complex question has been at the center of developmental biology for many years. The earliest step in this process – the induction of neural tissue – is intimately linked to patterning of the entire early embryo, and the molecular and embryological basis these processes are beginning to emerge. Here, we analyze classic and cutting-edge findings on neural induction in the mouse. We find that data from genetics, tissue explants, tissue grafting, and molecular marker expression support a coherent framework for mammalian neural induction. In this model, the gastrula organizer of the mouse embryo inhibits BMP signaling to allow neural tissue to form as a default fate – in the absence of instructive signals. The first neural tissue induced is anterior and subsequent neural tissue is posteriorized to form the midbrain, hindbrain, and spinal cord. The anterior visceral endoderm protects the pre-specified anterior neural fate from similar posteriorization, allowing formation of forebrain. This model is very similar to the default model of neural induction in the frog, thus bridging the evolutionary gap between amphibians and mammals. PMID:17585896

Frequentist Model Averaging in Structural Equation Modelling.

PubMed

Jin, Shaobo; Ankargren, Sebastian

2018-06-04

Model selection from a set of candidate models plays an important role in many structural equation modelling applications. However, traditional model selection methods introduce extra randomness that is not accounted for by post-model selection inference. In the current study, we propose a model averaging technique within the frequentist statistical framework. Instead of selecting an optimal model, the contributions of all candidate models are acknowledged. Valid confidence intervals and a [Formula: see text] test statistic are proposed. A simulation study shows that the proposed method is able to produce a robust mean-squared error, a better coverage probability, and a better goodness-of-fit test compared to model selection. It is an interesting compromise between model selection and the full model.

An Analysis of the President’s Budgetary Proposals for Fiscal Year 2010

DTIC Science & Technology

2009-06-01

Ozanne, Frank Russek, Marika Santoro, Kurt Seibert, Sven Sinclair, and David Weiner carried out the modeling . Barry Blom of CBO’s Projections Unit...Baseline Policy Assumptions 15 Ways in Which the President’s Proposals Would Affect the Economy 15 The Models and Their Results 21 The Potential Economic...Effects of Selected Proposals in the President’s 2010 Budget 27 The Models Used to Analyze the Supply-Side Macroeconomic Effects of the President’s

How Can It Cost That Much? A Three-Year Study of Proposal Production Costs.

ERIC Educational Resources Information Center

Wiese, W. C.; Bowden, C. Mal

1997-01-01

Examines significant new business proposal efforts for United States Department of Defense contracts. Identifies six "pillars" of a contractor's proposal preparation costs. Derives a formula that characterizes proposal preparation costs. Demonstrates that a quick, accurate cost model can be developed for proposal publishing. (RS)

Proposed evaluation framework for assessing operator performance with multisensor displays

NASA Technical Reports Server (NTRS)

Foyle, David C.

1992-01-01

Despite aggressive work on the development of sensor fusion algorithms and techniques, no formal evaluation procedures have been proposed. Based on existing integration models in the literature, an evaluation framework is developed to assess an operator's ability to use multisensor, or sensor fusion, displays. The proposed evaluation framework for evaluating the operator's ability to use such systems is a normative approach: The operator's performance with the sensor fusion display can be compared to the models' predictions based on the operator's performance when viewing the original sensor displays prior to fusion. This allows for the determination as to when a sensor fusion system leads to: 1) poorer performance than one of the original sensor displays (clearly an undesirable system in which the fused sensor system causes some distortion or interference); 2) better performance than with either single sensor system alone, but at a sub-optimal (compared to the model predictions) level; 3) optimal performance (compared to model predictions); or, 4) super-optimal performance, which may occur if the operator were able to use some highly diagnostic 'emergent features' in the sensor fusion display, which were unavailable in the original sensor displays. An experiment demonstrating the usefulness of the proposed evaluation framework is discussed.

Verifying and Validating Proposed Models for FSW Process Optimization

NASA Technical Reports Server (NTRS)

Schneider, Judith

2008-01-01

This slide presentation reviews Friction Stir Welding (FSW) and the attempts to model the process in order to optimize and improve the process. The studies are ongoing to validate and refine the model of metal flow in the FSW process. There are slides showing the conventional FSW process, a couple of weld tool designs and how the design interacts with the metal flow path. The two basic components of the weld tool are shown, along with geometries of the shoulder design. Modeling of the FSW process is reviewed. Other topics include (1) Microstructure features, (2) Flow Streamlines, (3) Steady-state Nature, and (4) Grain Refinement Mechanisms

Disturbed flow mediated modulation of shear forces on endothelial plane: A proposed model for studying endothelium around atherosclerotic plaques

NASA Astrophysics Data System (ADS)

Balaguru, Uma Maheswari; Sundaresan, Lakshmikirupa; Manivannan, Jeganathan; Majunathan, Reji; Mani, Krishnapriya; Swaminathan, Akila; Venkatesan, Saravanakumar; Kasiviswanathan, Dharanibalan; Chatterjee, Suvro

2016-06-01

Disturbed fluid flow or modulated shear stress is associated with vascular conditions such as atherosclerosis, thrombosis, and aneurysm. In vitro simulation of the fluid flow around the plaque micro-environment remains a challenging approach. Currently available models have limitations such as complications in protocols, high cost, incompetence of co-culture and not being suitable for massive expression studies. Hence, the present study aimed to develop a simple, versatile model based on Computational Fluid Dynamics (CFD) simulation. Current observations of CFD have shown the regions of modulated shear stress by the disturbed fluid flow. To execute and validate the model in real sense, cell morphology, cytoskeletal arrangement, cell death, reactive oxygen species (ROS) profile, nitric oxide production and disturbed flow markers under the above condition were assessed. Endothelium at disturbed flow region which had been exposed to low shear stress and swirling flow pattern showed morphological and expression similarities with the pathological disturbed flow environment reported previously. Altogether, the proposed model can serve as a platform to simulate the real time micro-environment of disturbed flow associated with eccentric plaque shapes and the possibilities of studying its downstream events.

76 FR 62148 - Title VI; Proposed Circular, Environmental Justice; Proposed Circular

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-06

...-0055] Title VI; Proposed Circular, Environmental Justice; Proposed Circular AGENCY: Federal Transit... the September 29, 2011, Federal Register Notices titled ``Title VI; Proposed Circular'' and... September 29, 2011, Federal Register Notices titled ``Title VI; Proposed Circular'' (76 FR 60593) and...

The Role of Interpersonal Relations in Healthcare Team Communication and Patient Safety: A Proposed Model of Interpersonal Process in Teamwork.

PubMed

Lee, Charlotte Tsz-Sum; Doran, Diane Marie

2017-06-01

Patient safety is compromised by medical errors and adverse events related to miscommunications among healthcare providers. Communication among healthcare providers is affected by human factors, such as interpersonal relations. Yet, discussions of interpersonal relations and communication are lacking in healthcare team literature. This paper proposes a theoretical framework that explains how interpersonal relations among healthcare team members affect communication and team performance, such as patient safety. We synthesized studies from health and social science disciplines to construct a theoretical framework that explicates the links among these constructs. From our synthesis, we identified two relevant theories: framework on interpersonal processes based on social relation model and the theory of relational coordination. The former involves three steps: perception, evaluation, and feedback; and the latter captures relational communicative behavior. We propose that manifestations of provider relations are embedded in the third step of the framework on interpersonal processes: feedback. Thus, varying team-member relationships lead to varying collaborative behavior, which affects patient-safety outcomes via a change in team communication. The proposed framework offers new perspectives for understanding how workplace relations affect healthcare team performance. The framework can be used by nurses, administrators, and educators to improve patient safety, team communication, or to resolve conflicts.

New Approaches to Travel Forecasting Models: A Synthesis of Four Research Proposals

DOT National Transportation Integrated Search

1994-01-01

In July 1992, the Federal Highway Administration (FHWA) issued a solicitation for proposals to redesign the travel demand forecasting process. The purpose of the solicitation was to enable travel behavior researchers to explain how transportation pla...

How to improve the promotion of Korean beef barbecue, bulgogi, for international customers. An application of quality function deployment.

PubMed

Park, So-Hyun; Ham, Sunny; Lee, Min-A

2012-10-01

Quality function deployment (QFD) is a product development technique that translates customer requirements into activities for the development of products and services. This study utilizes QFD to identify American customer's requirements for bulgogi, a popular Korean dish among international customers, and how to fulfill those requirements. A customer survey and an expert opinion survey were conducted for US customers. The top five customer requirements for bulgogi were identified as taste, freshness, flavor, tenderness, and juiciness; ease of purchase was included in the place of tenderness after calculating the weight requirements. Eighteen engineering characteristics were developed, and a 'localization of bulgogi menu' is strongly related to the other characteristics as well. The results from the calculation of relative importance of engineering characteristics identified that the 'control of marinating time', 'localization of bulgogi menu', 'improvement of cooking and serving process', 'development of recipe by parts of beef', and 'use of various seasonings' were the highest contributors to the overall improvement of bulgogi. The relative importance of engineering characteristics, correlation, and technical difficulties are ranked and integrated to develop the most effective strategy. The findings are discussed relative to industry implications. Copyright © 2012 Elsevier Ltd. All rights reserved.

Analysis of geomagnetic secular variation during 1980-1985 and 1985- 1990, and geomagnetic models proposed for the 1991 revision of the International Geomagnetic Reference Field

USGS Publications Warehouse

Peddie, N.W.

1992-01-01

The secular variation of the main geomagnetic field during the periods 1980-1985 and 1985-1990 was analyzed in terms of spherical harmonics up to the eighth degree and order. Data from worldwide magnetic observatories and the Navy's Project MAGNET aerial surveys were used. The resulting pair of secular-variation models was used to update the Definitive Geomagnetic Reference Field (DGRF) model for 1980, resulting in new mainfield models for 1985.0 and 1990.0. These, along with the secular-variation model for 1985-1990, were proposed for the 1991 revision of the International Geomagnetic Reference Field (IGRF). -Author

Proposed model for bistability in nanowire nonvolatile memory

NASA Astrophysics Data System (ADS)

Pokalyakin, V.; Tereshin, S.; Varfolomeev, A.; Zaretsky, D.; Baranov, A.; Banerjee, A.; Wang, Y.; Ramanathan, S.; Bandyopadhyay, S.

2005-06-01

Cadmium sulfide nanowires of 10-nm diameter, electrodeposited in porous anodic alumina films, exhibit an electronic bistability that can be harnessed for nonvolatile memory. The current-voltage characteristics of the wires show two stable conductance states that are well separated (conductances differ by more than four orders of magnitude) and long lived (longevity>1yr at room temperature). These two states can encode binary bits 0 and 1. It is possible to switch between them by varying the voltage across the wires, thus "writing" data. Transport behavior of this system has been investigated at different temperatures in an effort to understand the origin of bistability, and a model is presented to explain the observed features. Based on this model, we estimate that about 40 trapped electrons per nanowire are responsible for the bistability.

Brief Report: Preliminary Proposal of a Conceptual Model of a Digital Environment for Developing Mathematical Reasoning in Students with Autism Spectrum Disorders.

PubMed

Santos, Maria Isabel; Breda, Ana; Almeida, Ana Margarida

2015-08-01

There is clear evidence that in typically developing children reasoning and sense-making are essential in all mathematical learning and understanding processes. In children with autism spectrum disorders (ASD), however, these become much more significant, considering their importance to successful independent living. This paper presents a preliminary proposal of a digital environment, specifically targeted to promote the development of mathematical reasoning in students with ASD. Given the diversity of ASD, the prototyping of this environment requires the study of dynamic adaptation processes and the development of activities adjusted to each user's profile. We present the results obtained during the first phase of this ongoing research, describing a conceptual model of the proposed digital environment. Guidelines for future research are also discussed.

Proposal for a new CAPE-OPEN Object Model

EPA Science Inventory

Process simulation applications require the exchange of significant amounts of data between the flowsheet environment, unit operation model, and thermodynamic server. Packing and unpacking various data types and exchanging data using structured text-based architectures, including...

A proposed International Geomagnetic Reference Field for 1965- 1985.

USGS Publications Warehouse

Peddie, N.W.; Fabiano, E.B.

1982-01-01

A set of spherical harmonic models describing the Earth's main magnetic field from 1965 to 1985 has been developed and is proposed as the next revision of the International Geomagnetic Reference Field (IGRF). A tenth degree and order spherical harmonic model of the main field was derived from Magsat data. A series of eighth degree and order spherical harmonic models of the secular variation of the main field was derived from magnetic observatory annual mean values. Models of the main field at 1965, 1970, 1975, and 1980 were obtained by extrapolating the main-field model using the secular variation models.-Authors spherical harmonic models Earth main magnetic field Magsat data

Full Field and Anomaly Initialisation using a low order climate model: a comparison, and proposals for advanced formulations

NASA Astrophysics Data System (ADS)

Weber, Robin; Carrassi, Alberto; Guemas, Virginie; Doblas-Reyes, Francisco; Volpi, Danila

2014-05-01

Full Field (FFI) and Anomaly Initialisation (AI) are two schemes used to initialise seasonal-to-decadal (s2d) prediction. FFI initialises the model on the best estimate of the actual climate state and minimises the initial error. However, due to inevitable model deficiencies, the trajectories drift away from the observations towards the model's own attractor, inducing a bias in the forecast. AI has been devised to tackle the impact of drift through the addition of this bias onto the observations, in the hope of gaining an initial state closer to the model attractor. Its goal is to forecast climate anomalies. The large variety of experimental setups, global coupled models, and observational networks adopted world-wide have led to varying results with regards to the relative performance of AI and FFI. Our research is firstly motivated in a comparison of these two initialisation approaches under varying circumstances of observational errors, observational distributions, and model errors. We also propose and compare two advanced schemes for s2d prediction. Least Square Initialisation (LSI) intends to propagate observational information of partially initialized systems to the whole model domain, based on standard practices in data assimilation and using the covariance of the model anomalies. Exploring the Parameters Uncertainty (EPU) is an online drift correction technique applied during the forecast run after initialisation. It is designed to estimate, and subtract, the bias in the forecast related to parametric error. Experiments are carried out using an idealized coupled dynamics in order to facilitate better control and robust statistical inference. Results show that an improvement of FFI will necessitate refinements in the observations, whereas improvements in AI are subject to model advances. A successful approximation of the model attractor using AI is guaranteed only when the differences between model and nature probability distribution functions (PDFs) are

Proposal Savvy: Creating Successful Proposals for Media Projects.

ERIC Educational Resources Information Center

Parsigian, Elise K.

Suggesting that the need for creative thinking, creative problem solving, and creative presentations binds the components of the field of communication (journalism, advertising, and public relations), this book presents a guide to proposal thinking and proposal writing for anyone in the field of communication. The book helps readers evaluate,…

Proposal Writing.

ERIC Educational Resources Information Center

Grant, Andrew; And Others

1988-01-01

The basics of effective proposal writing, from content to structure to length, are presented in three articles: "Knowledge Is Power" (Andrew Grant, Emily S. Berkowitz), "Write on the Money" (Lucy Knight); and "The Problem Proposal." (MLW)

Proposal for an integrated evaluation model for the study of whole systems health care in cancer.

PubMed

Jonas, Wayne B; Beckner, William; Coulter, Ian

2006-12-01

For more than 200 years, biomedicine has approached the treatment of disease by studying disease processes (patho-genesis), inferring causal connections and developing specific approaches for therapeutically interfering with those processes. This pathogenic approach has been highly successful in acute and traumatic disease but less successful in chronic disease, primarily because of the complex, multi-factorial nature of most chronic disease, which does not allow for simple causal inference or for simple therapeutic interventions. This article suggests that chronic disease is best approached by enhancing healing processes (salutogenesis) as a whole system. Because of the nature of complex systems in chronic disease, an evaluation model based on integrative medicine is felt to be more appropriate than a disease model. The authors propose and describe an integrated model for the evaluation of healing (IMEH) that collects multilevel "thick case" observational data in assessing complex practices for chronic disease. If successful, this approach could become a blueprint for studying healing capacity in whole medical systems, including complementary medicine, traditional medicine, and conventional primary care. In addition, streamlining data collection and applying rapid informatics management might allow for such data to be used in guiding clinical practice. The IMEH involves collection, integration, and potentially feedback of relevant variables in the following areas: (1) sociocultural, (2) psychological and behavioral, (3) clinical (diagnosis based), and (4) biological. Evaluation and integration of these components would involve specialized research teams that feed their data into a single data management and information analysis center. These data can then be subjected to descriptive and pathway analysis providing "bench and bedside" information.

Proposed best practice for projects that involve modelling and simulation.

PubMed

O'Kelly, Michael; Anisimov, Vladimir; Campbell, Chris; Hamilton, Sinéad

2017-03-01

Modelling and simulation has been used in many ways when developing new treatments. To be useful and credible, it is generally agreed that modelling and simulation should be undertaken according to some kind of best practice. A number of authors have suggested elements required for best practice in modelling and simulation. Elements that have been suggested include the pre-specification of goals, assumptions, methods, and outputs. However, a project that involves modelling and simulation could be simple or complex and could be of relatively low or high importance to the project. It has been argued that the level of detail and the strictness of pre-specification should be allowed to vary, depending on the complexity and importance of the project. This best practice document does not prescribe how to develop a statistical model. Rather, it describes the elements required for the specification of a project and requires that the practitioner justify in the specification the omission of any of the elements and, in addition, justify the level of detail provided about each element. This document is an initiative of the Special Interest Group for modelling and simulation. The Special Interest Group for modelling and simulation is a body open to members of Statisticians in the Pharmaceutical Industry and the European Federation of Statisticians in the Pharmaceutical Industry. Examples of a very detailed specification and a less detailed specification are included as appendices. Copyright © 2016 John Wiley & Sons, Ltd.

Interactive Tax Reform: Simulating Impacts of Legislative Proposals.

ERIC Educational Resources Information Center

Downing, Roger H.; And Others

1985-01-01

Pennsylvania's mathematical modeling technique to evaluate tax reform proposals requires the following data: personal income at the local level and measures of the breakdown of property tax payment by land use classification. The simulation technique could be readily adapted in reorganizing educational finance systems. (MLF)

Leveraging ISI Multi-Model Prediction for Navy Operations: Proposal to the Office of Naval Research

DTIC Science & Technology

2013-09-30

Operations: Proposal to the Office of Naval Research” PI: Benjamin Kirtman University of Miami – RSMAS Meteorology and Physical Oceanography...Prediction for Navy Operations: Proposal to the Office of Naval Research 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d

Proposing a Metaliteracy Model to Redefine Information Literacy

ERIC Educational Resources Information Center

Jacobson, Trudi E.; Mackey, Thomas P.

2013-01-01

Metaliteracy is envisioned as a comprehensive model for information literacy to advance critical thinking and reflection in social media, open learning settings, and online communities. At this critical time in higher education, an expansion of the original definition of information literacy is required to include the interactive production and…

[Proposed difficult airway teaching methodology. Presentation of an interactive fresh frozen cadaver model].

PubMed

Catalá Bauset, J C; de Andres Ibañez, J A; Valverde Navarro, A; Martinez Soriano, F

2014-04-01

The aim of this paper is to present a methodology based on the use of fresh-frozen cadavers for training in the management of the airway, and to evaluate the degree of satisfaction among learning physicians. About 6 fresh-frozen cadavers and 14 workstations were prepared where participants were trained in the different skills needed for airway management. The details of preparation of the cadavers are described. The level of satisfaction of the participant was determined using a Likert rating scale of 5 points, at each of the 14 stations, as well as the overall assessment and clinical usefulness of the course. The mean overall evaluation of the course and its usefulness was 4.75 and 4.9, out of 5, respectively. All parts of the course were rated above 4 out of 5. The high level of satisfaction of the course remained homogeneous in the 2 editions analysed. The overall satisfaction of the course was not finally and uniquely determined by any of its particular parts. The fresh cadaver model for training physicians in techniques of airway management is a proposal satisfactory to the participant, and with a realism that approaches the live patient. Copyright © 2013 Sociedad Española de Anestesiología, Reanimación y Terapéutica del Dolor. Published by Elsevier España. All rights reserved.

A new proposal for greenhouse gas emissions responsibility allocation: best available technologies approach.

PubMed

Berzosa, Álvaro; Barandica, Jesús M; Fernández-Sánchez, Gonzalo

2014-01-01

In recent years, several methodologies have been developed for the quantification of greenhouse gas (GHG) emissions. However, determining who is responsible for these emissions is also quite challenging. The most common approach is to assign emissions to the producer (based on the Kyoto Protocol), but proposals also exist for its allocation to the consumer (based on an ecological footprint perspective) and for a hybrid approach called shared responsibility. In this study, the existing proposals and standards regarding the allocation of GHG emissions responsibilities are analyzed, focusing on their main advantages and problems. A new model of shared responsibility that overcomes some of the existing problems is also proposed. This model is based on applying the best available technologies (BATs). This new approach allocates the responsibility between the producers and the final consumers based on the real capacity of each agent to reduce emissions. The proposed approach is demonstrated using a simple case study of a 4-step life cycle of ammonia nitrate (AN) fertilizer production. The proposed model has the characteristics that the standards and publications for assignment of GHG emissions responsibilities demand. This study presents a new way to assign responsibilities that pushes all the actors in the production chain, including consumers, to reduce pollution. © 2013 SETAC.

Modern proposal of methodology for retrieval of characteristic synthetic rainfall hyetographs

NASA Astrophysics Data System (ADS)

Licznar, Paweł; Burszta-Adamiak, Ewa; Łomotowski, Janusz; Stańczyk, Justyna

2017-11-01

Modern engineering workshop of designing and modelling complex drainage systems is based on hydrodynamic modelling and has a probabilistic character. Its practical application requires a change regarding rainfall models accepted at the input. Previously used artificial rainfall models of simplified form, e.g. block precipitation or Euler's type II model rainfall are no longer sufficient. It is noticeable that urgent clarification is needed as regards the methodology of standardized rainfall hyetographs that would take into consideration the specifics of local storm rainfall temporal dynamics. The aim of the paper is to present a proposal for innovative methodology for determining standardized rainfall hyetographs, based on statistical processing of the collection of actual local precipitation characteristics. Proposed methodology is based on the classification of standardized rainfall hyetographs with the use of cluster analysis. Its application is presented on the example of selected rain gauges localized in Poland. Synthetic rainfall hyetographs achieved as a final result may be used for hydrodynamic modelling of sewerage systems, including probabilistic detection of necessary capacity of retention reservoirs.

Penrose-Hameroff orchestrated objective-reduction proposal for human consciousness is not biologically feasible.

PubMed

McKemmish, Laura K; Reimers, Jeffrey R; McKenzie, Ross H; Mark, Alan E; Hush, Noel S

2009-08-01

Penrose and Hameroff have argued that the conventional models of a brain function based on neural networks alone cannot account for human consciousness, claiming that quantum-computation elements are also required. Specifically, in their Orchestrated Objective Reduction (Orch OR) model [R. Penrose and S. R. Hameroff, J. Conscious. Stud. 2, 99 (1995)], it is postulated that microtubules act as quantum processing units, with individual tubulin dimers forming the computational elements. This model requires that the tubulin is able to switch between alternative conformational states in a coherent manner, and that this process be rapid on the physiological time scale. Here, the biological feasibility of the Orch OR proposal is examined in light of recent experimental studies on microtubule assembly and dynamics. It is shown that the tubulins do not possess essential properties required for the Orch OR proposal, as originally proposed, to hold. Further, we consider also recent progress in the understanding of the long-lived coherent motions in biological systems, a feature critical to Orch OR, and show that no reformation of the proposal based on known physical paradigms could lead to quantum computing within microtubules. Hence, the Orch OR model is not a feasible explanation of the origin of consciousness.

Proposal of a “Checklist” for endodontic treatment

PubMed Central

Díaz-Flores–García, Víctor; Perea-Pérez, Bernardo; Santiago-Sáez, Andrés; Cisneros-Cabello, Rafael

2014-01-01

Objectives: On the basis of the “Surgical Checklist” proposed by the WHO, we propose a new Checklist model adapted to the procedures of endodontic treatment. Study Design: The proposed document contains 21 items which are broken down into two groups: those which must be verified before beginning the treatment, and those which must be verified after completing it, but before the patient leaves the dentist’s office. Results: The Checklist is an easy-to-use tool that requires little time but provides, order, logic and systematization by taking into account certain basic concepts to increase patient safety. Discussion: We believe that the result is a Checklist that is easy to complete and which ensure the fulfillment of the key points on patient safety in the field of endodontics. Key words:Checklist, endodontics, patient safety, adverse event. PMID:24790707

Search for Hidden Particles (SHiP): a new experiment proposal

NASA Astrophysics Data System (ADS)

De Lellis, G.

2015-06-01

Searches for new physics with accelerators are being performed at the LHC, looking for high massive particles coupled to matter with ordinary strength. We propose a new experimental facility meant to search for very weakly coupled particles in the few GeV mass domain. The existence of such particles, foreseen in different theoretical models beyond the Standard Model, is largely unexplored from the experimental point of view. A beam dump facility, built at CERN in the north area, using 400 GeV protons is a copious factory of charmed hadrons and could be used to probe the existence of such particles. The beam dump is also an ideal source of tau neutrinos, the less known particle in the Standard Model. In particular, tau anti-neutrinos have not been observed so far. We therefore propose an experiment to search for hidden particles and study tau neutrino physics at the same time.

Proposed reference models for atomic oxygen in the terrestrial atmosphere

NASA Technical Reports Server (NTRS)

Llewellyn, E. J.; Mcdade, I. C.; Lockerbie, M. D.

1989-01-01

A provisional Atomic Oxygen Reference model was derived from average monthly ozone profiles and the MSIS-86 reference model atmosphere. The concentrations are presented in tabular form for the altitude range 40 to 130 km.

Hydrology and model study of the proposed Prosperity Reservoir, Center Creek Basin, southwestern Missouri

USGS Publications Warehouse

Harvey, Edward Joseph; Emmett, Leo F.

1980-01-01

A dam and reservoir have been proposed for construction on Center Creek, Jasper County, in southwestern Missouri. Ground-water levels in the hills adjacent to the reservoir will rise when the impoundment is completed. One of the problems is that the proposed site of Prosperity Reservoir is a few miles upstream from the lead-zinc mining area known as the Oronogo-Duenweg belt. In this belt transmissivities are variable but appear to be higher than they are in the immediate area of the reservoir.Grove Creek lies down-gradient from the reservoir area and separates it from the mining belt. A model study indicates that inflow from the proposed reservoir to the water table could cause water level rises varying from about 20 feet near the reservoir to 0.5 to 1.0 foot in the southern part of Grove Creek drainage basin. These rises will cause significant changes to the natural ground-water flow system. Increased ground-water elevations in the reservoir area could result in increased ground-water gradients and discharge to Grove and Center Creeks. The increase in ground-water discharge to Grove Creek, and in turn Center Creek, will have the beneficial effect of diluting mine-water discharge from the Oronogo-Duenweg belt during periods of low flow.However, if Grove Creek does not act as an effective drain and if conduits extend beneath Grove Creek to transfer the increased water available to the Oronogo-Duenweg belt, the flow regimen could change in the mining belt west of Grove Creek increasing mine-water discharge to Center Creek downstream from the reservoir.Bedrock in the area is Mississippian limestone, the deeply solutioned formation that contained the ore deposits. The limestone in the mining district was greatly altered by solution prior to ore deposition while the limestone in the area of the reservoir was altered less. The extent of the alteration is related to the aquifer characteristics in that high and low values of transmissivity and storage coefficient

The Development of a Proposed Global Work-Integrated Learning Framework

ERIC Educational Resources Information Center

McRae, Norah; Johnston, Nancy

2016-01-01

Building on the work completed in BC that resulted in the development of a WIL Matrix for comparing and contrasting various forms of WIL with the Canadian co-op model, this paper proposes a Global Work-Integrated Learning Framework that allows for the comparison of a variety of models of work-integrated learning found in the international…

Proposed Sources of Coaching Efficacy: A Meta-Analysis.

PubMed

Myers, Nicholas D; Park, Sung Eun; Ahn, Soyeon; Lee, Seungmin; Sullivan, Philip J; Feltz, Deborah L

2017-08-01

Coaching efficacy refers to the extent to which a coach believes that he or she has the capacity to affect the learning and performance of his or her athletes. The purpose of the current study was to empirically synthesize findings across the extant literature to estimate relationships between the proposed sources of coaching efficacy and each of the dimensions of coaching efficacy. A literature search yielded 20 studies and 278 effect size estimates that met the inclusion criteria. The overall relationship between the proposed sources of coaching efficacy and each dimension of coaching efficacy was positive and ranged from small to medium in size. Coach gender and level coached moderated the overall relationship between the proposed sources of coaching efficacy and each of the dimensions of coaching efficacy. Results from this meta-analysis provided some evidence for both the utility of, and possible revisions to, the conceptual model of coaching efficacy.

Creep stability of the proposed AIDA mission target 65803 Didymos: I. Discrete cohesionless granular physics model

NASA Astrophysics Data System (ADS)

Zhang, Yun; Richardson, Derek C.; Barnouin, Olivier S.; Maurel, Clara; Michel, Patrick; Schwartz, Stephen R.; Ballouz, Ronald-Louis; Benner, Lance A. M.; Naidu, Shantanu P.; Li, Junfeng

2017-09-01

As the target of the proposed Asteroid Impact & Deflection Assessment (AIDA) mission, the near-Earth binary asteroid 65803 Didymos represents a special class of binary asteroids, those whose primaries are at risk of rotational disruption. To gain a better understanding of these binary systems and to support the AIDA mission, this paper investigates the creep stability of the Didymos primary by representing it as a cohesionless self-gravitating granular aggregate subject to rotational acceleration. To achieve this goal, a soft-sphere discrete element model (SSDEM) capable of simulating granular systems in quasi-static states is implemented and a quasi-static spin-up procedure is carried out. We devise three critical spin limits for the simulated aggregates to indicate their critical states triggered by reshaping and surface shedding, internal structural deformation, and shear failure, respectively. The failure condition and mode, and shear strength of an aggregate can all be inferred from the three critical spin limits. The effects of arrangement and size distribution of constituent particles, bulk density, spin-up path, and interparticle friction are numerically explored. The results show that the shear strength of a spinning self-gravitating aggregate depends strongly on both its internal configuration and material parameters, while its failure mode and mechanism are mainly affected by its internal configuration. Additionally, this study provides some constraints on the possible physical properties of the Didymos primary based on observational data and proposes a plausible formation mechanism for this binary system. With a bulk density consistent with observational uncertainty and close to the maximum density allowed for the asteroid, the Didymos primary in certain configurations can remain geo-statically stable without requiring cohesion.

A sliding mode control proposal for open-loop unstable processes.

PubMed

Rojas, Rubén; Camacho, Oscar; González, Luis

2004-04-01

This papers presents a sliding mode controller based on a first-order-plus-dead-time model of the process for controlling open-loop unstable systems. The proposed controller has a simple and fixed structure with a set of tuning equations as a function of the desired performance. Both linear and nonlinear models were used to study the controller performance by computer simulations.

Modelling Transformations of Quadratic Functions: A Proposal of Inductive Inquiry

ERIC Educational Resources Information Center

Sokolowski, Andrzej

2013-01-01

This paper presents a study about using scientific simulations to enhance the process of mathematical modelling. The main component of the study is a lesson whose major objective is to have students mathematise a trajectory of a projected object and then apply the model to formulate other trajectories by using the properties of function…

The qualitative research proposal.

PubMed

Klopper, H

2008-12-01

Qualitative research in the health sciences has had to overcome many prejudices and a number of misunderstandings, but today qualitative research is as acceptable as quantitative research designs and is widely funded and published. Writing the proposal of a qualitative study, however, can be a challenging feat, due to the emergent nature of the qualitative research design and the description of the methodology as a process. Even today, many sub-standard proposals at post-graduate evaluation committees and application proposals to be considered for funding are still seen. This problem has led the researcher to develop a framework to guide the qualitative researcher in writing the proposal of a qualitative study based on the following research questions: (i) What is the process of writing a qualitative research proposal? and (ii) What does the structure and layout of a qualitative proposal look like? The purpose of this article is to discuss the process of writing the qualitative research proposal, as well as describe the structure and layout of a qualitative research proposal. The process of writing a qualitative research proposal is discussed with regards to the most important questions that need to be answered in your research proposal with consideration of the guidelines of being practical, being persuasive, making broader links, aiming for crystal clarity and planning before you write. While the structure of the qualitative research proposal is discussed with regards to the key sections of the proposal, namely the cover page, abstract, introduction, review of the literature, research problem and research questions, research purpose and objectives, research paradigm, research design, research method, ethical considerations, dissemination plan, budget and appendices.

New Product Development for Green and Low-Carbon Products—A Case Study of Taiwan's TFT-LCD Manufacturer

NASA Astrophysics Data System (ADS)

Lin, Chun-Yu; Lee, Amy H. I.

2011-11-01

Green supply chain has become an important topic these days due to pollution, global warming, extreme climatic events, etc. A green product is manufactured with the goal of reducing the damage to the environment and limiting the use of energy and other resources at any stage of its life, including raw materials, manufacture, use, and disposal. Carbon footprint is a good measure of the impact that a product has on the environment, especially in climate change, in the entire lifetime of the product. Carbon footprint is directly linked to CO2 emission; thus, the reduction of CO2 emission must be considered in the product life cycle. Although more and more researchers are working on the green supply chain management in the past few years, few have incorporated CO2 emission or carbon footprint into the green supply chain system. Therefore, this research aims to propose an integrated model for facilitating the new product development (NPD) for green and low-carbon products. In this research, a systematic model based on quality function deployment (QFD) is constructed for developing green and low-carbon products in a TFT-LCD manufacturer. Literature review and interviews with experts are done first to collect the factors for developing and manufacturing green and low-carbon products. Fuzzy Delphi method (FDM) is applied next to extract the important factors, and fuzzy interpretive structural modeling (FISM) is used subsequently to understand the relationships among factors. A house of quality (HOQ) for product planning is built last. The results shall provide important information for a TFT-LCD firm in designing a new product.

A Quality Function Deployment-Based Expert System for Cotton Fibre Selection

NASA Astrophysics Data System (ADS)

Chakraborty, Shankar; Prasad, Kanika

2018-01-01

The textile industries have seen resurgence in customers' demand for quality products during the preceding few years. This product range is extremely varied, with hand-spun and hand-woven products at one end of the spectrum, while products manufactured from the capital intensive sophisticated machineries at the other end. Since, cotton fibres are predominantly employed as the raw material for manufacturing these products, their proper selection is crucial for sustainable development of the textile/spinning industries. However, availability of numerous cotton fibre alternatives with various physical properties makes this selection process unwieldy and time consuming. Thus, there is need for a structured approach that can incorporate customers' demand into the selection process. This paper demonstrates the application of a structured and logical procedure of selecting the best cotton fibre type to fulfill a set of specified end product requirements through design and development of a quality function deployment (QFD)-based expert system. The QFD technique is employed here to provide due importance to the customers' spoken and unspoken needs, and subsequently calculate the priority weights of the considered cotton fibre properties. Two real time illustrative examples are presented to explicate the applicability and potentiality of the developed expert system to resolve cotton fibre selection problems.

A Quality Function Deployment-Based Expert System for Cotton Fibre Selection

NASA Astrophysics Data System (ADS)

Chakraborty, Shankar; Prasad, Kanika

2018-06-01

The textile industries have seen resurgence in customers' demand for quality products during the preceding few years. This product range is extremely varied, with hand-spun and hand-woven products at one end of the spectrum, while products manufactured from the capital intensive sophisticated machineries at the other end. Since, cotton fibres are predominantly employed as the raw material for manufacturing these products, their proper selection is crucial for sustainable development of the textile/spinning industries. However, availability of numerous cotton fibre alternatives with various physical properties makes this selection process unwieldy and time consuming. Thus, there is need for a structured approach that can incorporate customers' demand into the selection process. This paper demonstrates the application of a structured and logical procedure of selecting the best cotton fibre type to fulfill a set of specified end product requirements through design and development of a quality function deployment (QFD)-based expert system. The QFD technique is employed here to provide due importance to the customers' spoken and unspoken needs, and subsequently calculate the priority weights of the considered cotton fibre properties. Two real time illustrative examples are presented to explicate the applicability and potentiality of the developed expert system to resolve cotton fibre selection problems.

2012 Community Earth System Model (CESM) Tutorial - Proposal to DOE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holland, Marika; Bailey, David A

2013-03-18

The Community Earth System Model (CESM) is a fully-coupled, global climate model that provides state-of-the-art computer simulations of the Earth's past, present, and future climate states. This document provides the agenda and list of participants for the conference. Web materials for all lectures and practical sessions available from: http://www.cesm.ucar.edu/events/tutorials/073012/ .

An integrated decision support system for TRAC: A proposal

NASA Technical Reports Server (NTRS)

Mukkamala, Ravi

1991-01-01

Optimal allocation and usage of resources is a key to effective management. Resources of concern to TRAC are: Manpower (PSY), Money (Travel, contracts), Computing, Data, Models, etc. Management activities of TRAC include: Planning, Programming, Tasking, Monitoring, Updating, and Coordinating. Existing systems are insufficient, not completely automated, manpower intensive, and has the potential for data inconsistency exists. A system is proposed which suggests a means to integrate all project management activities of TRAC through the development of a sophisticated software and by utilizing the existing computing systems and network resources. The systems integration proposal is examined in detail.

a Proposed Benchmark Problem for Scatter Calculations in Radiographic Modelling

NASA Astrophysics Data System (ADS)

Jaenisch, G.-R.; Bellon, C.; Schumm, A.; Tabary, J.; Duvauchelle, Ph.

2009-03-01

Code Validation is a permanent concern in computer modelling, and has been addressed repeatedly in eddy current and ultrasonic modeling. A good benchmark problem is sufficiently simple to be taken into account by various codes without strong requirements on geometry representation capabilities, focuses on few or even a single aspect of the problem at hand to facilitate interpretation and to avoid that compound errors compensate themselves, yields a quantitative result and is experimentally accessible. In this paper we attempt to address code validation for one aspect of radiographic modeling, the scattered radiation prediction. Many NDT applications can not neglect scattered radiation, and the scatter calculation thus is important to faithfully simulate the inspection situation. Our benchmark problem covers the wall thickness range of 10 to 50 mm for single wall inspections, with energies ranging from 100 to 500 keV in the first stage, and up to 1 MeV with wall thicknesses up to 70 mm in the extended stage. A simple plate geometry is sufficient for this purpose, and the scatter data is compared on a photon level, without a film model, which allows for comparisons with reference codes like MCNP. We compare results of three Monte Carlo codes (McRay, Sindbad and Moderato) as well as an analytical first order scattering code (VXI), and confront them to results obtained with MCNP. The comparison with an analytical scatter model provides insights into the application domain where this kind of approach can successfully replace Monte-Carlo calculations.

40 CFR 57.810 - Filing of briefs, proposed findings, and proposed recommendations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Filing of briefs, proposed findings, and proposed recommendations. 57.810 Section 57.810 Protection of Environment ENVIRONMENTAL PROTECTION... Requirement for Use of Continuous Emission Reduction Technology § 57.810 Filing of briefs, proposed findings...

Proposing a Model of Co-Regulated Learning for Graduate Medical Education.

PubMed

Rich, Jessica V

2017-08-01

Primarily grounded in Zimmerman's social cognitive model of self-regulation, graduate medical education is guided by principles that self-regulated learning takes place within social context and influence, and that the social context and physical environment reciprocally influence persons and their cognition, behavior, and development. However, contemporary perspectives on self-regulation are moving beyond Zimmerman's triadic reciprocal orientation to models that consider social transactions as the central core of regulated learning. Such co-regulated learning models emphasize shared control of learning and the role more advanced others play in scaffolding novices' metacognitive engagement.Models of co-regulated learning describe social transactions as periods of distributed regulation among individuals, which instrumentally promote or inhibit the capacity for individuals to independently self-regulate. Social transactions with other regulators, including attending physicians, more experienced residents, and allied health care professionals, are known to mediate residents' learning and to support or hamper the development of their self-regulated learning competence. Given that social transactions are at the heart of learning-oriented assessment and entrustment decisions, an appreciation for co-regulated learning is likely important for advancing medical education research and practice-especially given the momentum of new innovations such as entrustable professional activities.In this article, the author explains why graduate medical educators should consider adopting a model of co-regulated learning to complement and extend Zimmerman's models of self-regulated learning. In doing so, the author suggests a model of co-regulated learning and provides practical examples of how the model is relevant to graduate medical education research and practice.

A proposal for cervical screening information systems in developing countries.

PubMed

Marrett, Loraine D; Robles, Sylvia; Ashbury, Fredrick D; Green, Bo; Goel, Vivek; Luciani, Silvana

2002-11-20

The effective and efficient delivery of cervical screening programs requires information for planning, management, delivery and evaluation. Specially designed systems are generally required to meet these needs. In many developing countries, lack of information systems constitutes an important barrier to development of comprehensive screening programs and the effective control of cervical cancer. Our report outlines a framework for creating such systems in developing countries and describes a conceptual model for a cervical screening information system. The proposed system is modular, recognizing that there will be considerable between-region heterogeneity in current status and priorities. The proposed system is centered on modules that would allow for the assembly and computerization of data on Pap tests, since these represent the main screening modality at the present time. Additional modules would process data and create and maintain a screening database (e.g., standardize, edit, link and update modules) and allow for the integration of other types of data, such as cervical histopathology results. An open systems development model is proposed, since it is most compatible with the goals of local stakeholder involvement and capacity-building. Copyright 2002 Wiley-Liss, Inc.

Summary and Synthesis: How to Present a Research Proposal.

PubMed

Setia, Maninder Singh; Panda, Saumya

2017-01-01

This concluding module attempts to synthesize the key learning points discussed during the course of the previous ten sets of modules on methodology and biostatistics. The objective of this module is to discuss how to present a model research proposal, based on whatever was discussed in the preceding modules. The lynchpin of a research proposal is the protocol, and the key component of a protocol is the study design. However, one must not neglect the other areas, be it the project summary through which one catches the eyes of the reviewer of the proposal, or the background and the literature review, or the aims and objectives of the study. Two critical areas in the "methods" section that cannot be emphasized more are the sampling strategy and a formal estimation of sample size. Without a legitimate sample size, none of the conclusions based on the statistical analysis would be valid. Finally, the ethical parameters of the study should be well understood by the researchers, and that should get reflected in the proposal.

Summary and Synthesis: How to Present a Research Proposal

PubMed Central

Setia, Maninder Singh; Panda, Saumya

2017-01-01

This concluding module attempts to synthesize the key learning points discussed during the course of the previous ten sets of modules on methodology and biostatistics. The objective of this module is to discuss how to present a model research proposal, based on whatever was discussed in the preceding modules. The lynchpin of a research proposal is the protocol, and the key component of a protocol is the study design. However, one must not neglect the other areas, be it the project summary through which one catches the eyes of the reviewer of the proposal, or the background and the literature review, or the aims and objectives of the study. Two critical areas in the “methods” section that cannot be emphasized more are the sampling strategy and a formal estimation of sample size. Without a legitimate sample size, none of the conclusions based on the statistical analysis would be valid. Finally, the ethical parameters of the study should be well understood by the researchers, and that should get reflected in the proposal. PMID:28979004

Analysis of a Proposed Material Handling System Using a Computer Simulation Model.

DTIC Science & Technology

1981-06-01

the proposed MMHS were identified to assist the managers of the system in implementation and future planning. * 4 UNCLASSIFIED SRCUllTY CLASSIPICATION...the Degree of Master of Science in Logistics Management By Darwin D. Harp, BSIE GS-11. June 1981 Approved for public release; distribution unlimited...partial fulfillment of the requirements for the degree of MASTER OF SCIENCE IN LOGISTICS MANAGEMENT DATE: 17 June 1981 (( COMMITECARN ii 67- B I

A proposed model for small-world structural organization of mission teams and tasks in order to optimize efficiency and minimize costs

NASA Astrophysics Data System (ADS)

Ribeiro, André S.; Almeida, Miguel

2003-11-01

We propose a model of structural organization and intercommunication between all elements of every team involved in the development of a space probe to improve efficiency. Such structure is built to minimize path between any two elements, allowing fast information flow in the structure. Structures are usually very clustered inside each task team but only the heads of departments, or occasional meetings, usually assure the links between team elements. This is responsible for a lack of information exchange between staff members of each team. We propose the establishment of permanent small working groups of staff elements from different teams, in a random but permanent basis. The elements chosen for such connections establishment can be chosen in a temporary basis, but the connections must exist permanently because only with permanent connections can information flow when needed. A few of such random connections between staff members will diminish the average path length, between any two elements of any team, for information exchange. A small world structure will emerge with low internal energy costs, which is the structure used by biological neuronal systems.

A proposed model for small-world structural organization of mission teams and tasks in order to optimize efficiency and minimize costs

NASA Astrophysics Data System (ADS)

Ribeiro, André S.; Almeida, Miguel

2006-10-01

We propose a model of structural organization and intercommunication between all elements of every team involved in the development of a space probe to improve efficiency. Such structure is built to minimize path between any two elements, allowing fast information flow in the structure. Structures are usually very clustered inside each task team but only the heads of departments, or occasional meetings, usually assure the links between team elements. This is responsible for a lack of information exchange between staff members of each team. We propose the establishment of permanent small working groups of staff elements from different teams, in a random but permanent basis. The elements chosen for such connections establishment can be chosen on a temporary basis, but the connections must exist permanently because only with permanent connections can information flow when needed. A few of such random connections between staff members will diminish the average path length, between any two elements of any team, for information exchange. A small world structure will emerge with low internal energy costs, which is the structure used by biological neuronal systems.

Generating region proposals for histopathological whole slide image retrieval.

PubMed

Ma, Yibing; Jiang, Zhiguo; Zhang, Haopeng; Xie, Fengying; Zheng, Yushan; Shi, Huaqiang; Zhao, Yu; Shi, Jun

2018-06-01

Content-based image retrieval is an effective method for histopathological image analysis. However, given a database of huge whole slide images (WSIs), acquiring appropriate region-of-interests (ROIs) for training is significant and difficult. Moreover, histopathological images can only be annotated by pathologists, resulting in the lack of labeling information. Therefore, it is an important and challenging task to generate ROIs from WSI and retrieve image with few labels. This paper presents a novel unsupervised region proposing method for histopathological WSI based on Selective Search. Specifically, the WSI is over-segmented into regions which are hierarchically merged until the WSI becomes a single region. Nucleus-oriented similarity measures for region mergence and Nucleus-Cytoplasm color space for histopathological image are specially defined to generate accurate region proposals. Additionally, we propose a new semi-supervised hashing method for image retrieval. The semantic features of images are extracted with Latent Dirichlet Allocation and transformed into binary hashing codes with Supervised Hashing. The methods are tested on a large-scale multi-class database of breast histopathological WSIs. The results demonstrate that for one WSI, our region proposing method can generate 7.3 thousand contoured regions which fit well with 95.8% of the ROIs annotated by pathologists. The proposed hashing method can retrieve a query image among 136 thousand images in 0.29 s and reach precision of 91% with only 10% of images labeled. The unsupervised region proposing method can generate regions as predictions of lesions in histopathological WSI. The region proposals can also serve as the training samples to train machine-learning models for image retrieval. The proposed hashing method can achieve fast and precise image retrieval with small amount of labels. Furthermore, the proposed methods can be potentially applied in online computer-aided-diagnosis systems. Copyright

Proposed actions are no actions: re-modeling an ontology design pattern with a realist top-level ontology.

PubMed

Seddig-Raufie, Djamila; Jansen, Ludger; Schober, Daniel; Boeker, Martin; Grewe, Niels; Schulz, Stefan

2012-09-21

Ontology Design Patterns (ODPs) are representational artifacts devised to offer solutions for recurring ontology design problems. They promise to enhance the ontology building process in terms of flexibility, re-usability and expansion, and to make the result of ontology engineering more predictable. In this paper, we analyze ODP repositories and investigate their relation with upper-level ontologies. In particular, we compare the BioTop upper ontology to the Action ODP from the NeOn an ODP repository. In view of the differences in the respective approaches, we investigate whether the Action ODP can be embedded into BioTop. We demonstrate that this requires re-interpreting the meaning of classes of the NeOn Action ODP in the light of the precepts of realist ontologies. As a result, the re-design required clarifying the ontological commitment of the ODP classes by assigning them to top-level categories. Thus, ambiguous definitions are avoided. Classes of real entities are clearly distinguished from classes of information artifacts. The proposed approach avoids the commitment to the existence of unclear future entities which underlies the NeOn Action ODP. Our re-design is parsimonious in the sense that existing BioTop content proved to be largely sufficient to define the different types of actions and plans. The proposed model demonstrates that an expressive upper-level ontology provides enough resources and expressivity to represent even complex ODPs, here shown with the different flavors of Action as proposed in the NeOn ODP. The advantage of ODP inclusion into a top-level ontology is the given predetermined dependency of each class, an existing backbone structure and well-defined relations. Our comparison shows that the use of some ODPs is more likely to cause problems for ontology developers, rather than to guide them. Besides the structural properties, the explanation of classification results were particularly hard to grasp for 'self-sufficient' ODPs as

An improved interfacial bonding model for material interface modeling

PubMed Central

Lin, Liqiang; Wang, Xiaodu; Zeng, Xiaowei

2016-01-01

An improved interfacial bonding model was proposed from potential function point of view to investigate interfacial interactions in polycrystalline materials. It characterizes both attractive and repulsive interfacial interactions and can be applied to model different material interfaces. The path dependence of work-of-separation study indicates that the transformation of separation work is smooth in normal and tangential direction and the proposed model guarantees the consistency of the cohesive constitutive model. The improved interfacial bonding model was verified through a simple compression test in a standard hexagonal structure. The error between analytical solutions and numerical results from the proposed model is reasonable in linear elastic region. Ultimately, we investigated the mechanical behavior of extrafibrillar matrix in bone and the simulation results agreed well with experimental observations of bone fracture. PMID:28584343

Semiotic-conceptual analysis: a proposal

NASA Astrophysics Data System (ADS)

Priss, Uta

2017-07-01

This paper provides the basic definitions of Semiotic-conceptual analysis (SCA), which is a mathematical modelling of signs as elements of a triadic relation. FCA concept lattices are constructed for each of the three sign components. It is demonstrated how core linguistic and semiotic notions (such as synonymy and icon) can be represented with SCA. While the usefulness of SCA has already been demonstrated in a number of applications and several propositions are proven in this paper, there are still many open questions as to what to do next with SCA. Therefore, this paper is meant as a proposal and encouragement for further development.

Preparing Healthy Young Children for Hospitalization: A Rationale and Proposal.

ERIC Educational Resources Information Center

Poster, Elizabeth C.

1984-01-01

Proposes a precrisis curriculum for nursery and elementary schools to prepare healthy young children for hospitalization as an alternative to current preadmission preparation programs. Key elements include such stress-immunization techniques as systematic desensitization, modeling, and rehearsal. (AS)

A proposed model for managing cases of neurologically impaired infants.

PubMed

Berkowitz, Richard L; Hankins, Gary; Waldman, Richard; Montalto, Donna; Moore, Kathryn

2009-03-01

The current mechanism for obtaining financial support for families with neurologically impaired infants is seriously flawed. It relies on payment awarded through the tort system based on a claim that medical negligence was responsible for the infant's condition. The system is extraordinarily inefficient and expensive, as well as being unfair to many families with affected children and to physicians who are unjustly accused of contributing to outcomes they could not have prevented. Furthermore, the exorbitant malpractice premiums necessary to support the system are threatening the future of obstetric practice in the United States. This article describes a two-pronged program designed to correct these inequities and to assess each case for the occurrence of medical negligence, which has been submitted to the New York State legislature as a proposed bill entitled the Neurologically Impaired Program for New York State (S7748).

Proposal for a transmon-based quantum router.

PubMed

Sala, Arnau; Blaauboer, M

2016-07-13

We propose an implementation of a quantum router for microwave photons in a superconducting qubit architecture consisting of a transmon qubit, SQUIDs and a nonlinear capacitor. We model and analyze the dynamics of operation of the quantum switch using quantum Langevin equations in a scattering approach and compute the photon reflection and transmission probabilities. For parameters corresponding to up-to-date experimental devices we predict successful operation of the router with probabilities above 94%.

Study on a model for future occupational health: proposal for an occupational health service model in Japan.

PubMed

Higashi, Toshiaki

2006-10-01

The Study Model for Future Occupational Health (funded by a research grant from the Ministry of Health, Welfare and Labor) is a joint research project involving various organizations and agencies undertaken from 2002 to 2004. Society has undergone a dramatic transformation due to technological developments and internationalization. At the same time a low birth rate and an aging population have resulted in an increase in both the percentage of workers experiencing strong anxiety and stress in relation to their jobs and the working environment and the number of suicides. As a natural consequence, occupational health services are now expected to provide EAP, consulting and other functions that were formerly considered outside the realm of occupational health. In consideration of this background, the present study propose the following issues to provide a model for future occupational health services that meet the conditions presently confronted by each worker. 1. How to provide occupational health services and occupational physicians' services: 1) a basic time of 20 minutes of occupational health services per year should be allotted to each worker and to all workers; 2) the obligatory regulations should be revised to expand the obligation from businesses each with 50 or more employees under the present laws to businesses each with 30 or more employees. 2. Providers of occupational health services and occupational physicians' services: (1) reinforcement of outside occupational health agencies; (2) fostering occupational health consultant firms; (3) development of an institute of occupational safety and health; (4) support of activities by authorized occupational physicians in the field; (5) expanding of joint selection of occupational physicians including subsidy increase and the extension of a period of subsidy to five hears; (6) licensing of new entry into occupational health undertaking. 3. Introduction of new report system: (1) establishment of the obligation to

Modeling Operations Other Than War: Non-Combatants in Combat Modeling

DTIC Science & Technology

1994-09-01

supposition that non-combatants are an essential feature in OOTW. The model proposal includes a methodology for civilian unit decision making . The model...combatants are an essential feature in OOTW. The model proposal includes a methodology for civilian unit decision making . Thi- model also includes...numerical example demonstrated that the model appeared to perform in an acceptable manner, in that it produced output within a reasonable range. During the

Deformation modeling and constitutive modeling for anisotropic superalloys

NASA Technical Reports Server (NTRS)

Milligan, Walter W.; Antolovich, Stephen D.

1989-01-01

A study of deformation mechanisms in the single crystal superalloy PWA 1480 was conducted. Monotonic and cyclic tests were conducted from 20 to 1093 C. Both (001) and near-(123) crystals were tested, at strain rates of 0.5 and 50 percent/minute. The deformation behavior could be grouped into two temperature regimes: low temperatures, below 760 C; and high temperatures, above 820 to 950 C depending on the strain rate. At low temperatures, the mechanical behavior was very anisotropic. An orientation dependent CRSS, a tension-compression asymmetry, and anisotropic strain hardening were all observed. The material was deformed by planar octahedral slip. The anisotropic properties were correlated with the ease of cube cross-slip, as well as the number of active slip systems. At high temperatures, the material was isotropic, and deformed by homogeneous gamma by-pass. It was found that the temperature dependence of the formation of superlattice-intrinsic stacking faults was responsible for the local minimum in the CRSS of this alloy at 400 C. It was proposed that the cube cross-slip process must be reversible. This was used to explain the reversible tension-compression asymmetry, and was used to study models of cross-slip. As a result, the cross-slip model proposed by Paidar, Pope and Vitek was found to be consistent with the proposed slip reversibility. The results were related to anisotropic viscoplastic constitutive models. The model proposed by Walter and Jordan was found to be capable of modeling all aspects of the material anisotropy. Temperature and strain rate boundaries for the model were proposed, and guidelines for numerical experiments were proposed.

Issues in Proposing a General Model of the Effects of Divorce on Children.

ERIC Educational Resources Information Center

Kurdek, Lawrence A.

1993-01-01

Responds to previous article by Amato on children's adjustment to divorce. Focuses on two aspects of Amato's review: the mechanics of the review (perspectives advanced, criteria used to evaluate generated hypotheses, and accuracy of conclusions) and critical comments raised about the existing literature and in particular the proposed general model…

A Study of Best Practices in Training Transfer and Proposed Model of Transfer

ERIC Educational Resources Information Center

Burke, Lisa A.; Hutchins, Holly M.

2008-01-01

Data were gathered from a sample of training professionals of an American Society of Training and Development (ASTD) chapter in the southern United States regarding best practices for supporting training transfer. Content analysis techniques, based on a rigorous methodology proposed by Insch, Moore, & Murphy (1997), were used to analyze the…

Proposing a Formalised Model for Mindful Information Systems Offshoring

NASA Astrophysics Data System (ADS)

Costello, Gabriel J.; Coughlan, Chris; Donnellan, Brian; Gadatsch, Andreas

The central thesis of this chapter is that mathematical economics can provide a novel approach to the examination of offshoring business decisions and provide an impetus for future research in the area. A growing body of research indicates that projected cost savings from IT offshoring projects are not being met. Furthermore, evidence suggests that decision-making processes have been more emotional than rational, and that many offshoring arrangements have been rushed into without adequate analysis of the true costs involved. Building on the concept of mindfulness and mindlessness introduced to the IS literature by Swanson and Ramiller, a cost equation is developed using “deductive reasoning rather than inductive study” in the tradition of mathematical economics. The model endeavours to capture a wide range of both the quantitative and qualitative parameters. Although the economic model is illustrated against the background of a European scenario, the theoretical framework is generic and applicable to organisations in any global location.

Proposed Reference Spectral Irradiance Standards to Improve Photovoltaic Concentrating System Design and Performance Evaluation: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Myers, D. R.; Emery, K. E.; Gueymard, C.

2002-05-01

This conference paper describes the American Society for Testing and Materials (ASTM), the International Electrotechnical Commission (IEC), and the International Standards Organization (ISO) standard solar terrestrial spectra (ASTM G-159, IEC-904-3, ISO 9845-1) provide standard spectra for photovoltaic performance applications. Modern terrestrial spectral radiation models and knowledge of atmospheric physics are applied to develop suggested revisions to update the reference spectra. We use a moderately complex radiative transfer model (SMARTS2) to produce the revised spectra. SMARTS2 has been validated against the complex MODTRAN radiative transfer code and spectral measurements. The model is proposed as an adjunct standard to reproduce the referencemore » spectra. The proposed spectra represent typical clear sky spectral conditions associated with sites representing reasonable photovoltaic energy production and weathering and durability climates. The proposed spectra are under consideration by ASTM.« less

Guidelines to design engineering education in the twenty-first century for supporting innovative product development

NASA Astrophysics Data System (ADS)

Violante, Maria Grazia; Vezzetti, Enrico

2017-11-01

In the twenty-first century, meeting our technological challenges demands educational excellence, a skilled populace that is ready for the critical challenges society faces. There is widespread consensus, however, that education systems are failing to adequately prepare all students with the essential twenty-first century knowledge and skills necessary to succeed in life, career, and citizenship. The purpose of this paper is to understand how twenty-first century knowledge and skills can be appropriately embedded in engineering education finalised to innovative product development by using additive manufacturing (AM). The study designs a learning model by which to achieve effective AM education to address the requirements of twenty-first century and to offer students the occasion to experiment with STEM (Science, technology, engineering, and mathematics) concepts. The study is conducted using the quality function deployment (QFD) methodology.

77 FR 75243 - Self-Regulatory Organizations; Options Clearing Corporation; Order Approving Proposed Rule Change...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

... modeling and risk management procedures (``Risk Management Proposal'') \\9\\ is approved by the Commission.... The enhancements are part of OCC's ongoing efforts to test and improve its risk management operations... Index Options,\\12\\ and only subject to the filing and approval of the Risk Management Proposal, as...

Queering Constructs: Proposing a Dynamic Gender and Sexuality Model

ERIC Educational Resources Information Center

Jourian, T. J.

2015-01-01

Higher education educators commonly understand social identities, including gender, to be fluid and dynamic. Lev's (2004) model of four components of sexual identity is commonly used to demonstrate the fluidity of sex, gender, and sexuality for individuals, but it does little to address the fixedness of those constructs. Through a multipronged…

Mapping care processes within a hospital: from theory to a web-based proposal merging enterprise modelling and ISO normative principles.

PubMed

Staccini, Pascal; Joubert, Michel; Quaranta, Jean-François; Fieschi, Marius

2005-03-01

Today, the economic and regulatory environment, involving activity-based and prospective payment systems, healthcare quality and risk analysis, traceability of the acts performed and evaluation of care practices, accounts for the current interest in clinical and hospital information systems. The structured gathering of information relative to users' needs and system requirements is fundamental when installing such systems. This stage takes time and is generally misconstrued by caregivers and is of limited efficacy to analysts. We used a modelling technique designed for manufacturing processes (IDEF0/SADT). We enhanced the basic model of an activity with descriptors extracted from the Ishikawa cause-and-effect diagram (methods, men, materials, machines, and environment). We proposed an object data model of a process and its components, and programmed a web-based tool in an object-oriented environment. This tool makes it possible to extract the data dictionary of a given process from the description of its elements and to locate documents (procedures, recommendations, instructions) according to each activity or role. Aimed at structuring needs and storing information provided by directly involved teams regarding the workings of an institution (or at least part of it), the process-mapping approach has an important contribution to make in the analysis of clinical information systems.

Future Mission Proposal Opportunities: Discovery, New Frontiers, and Project Prometheus

NASA Technical Reports Server (NTRS)

Niebur, S. M.; Morgan, T. H.; Niebur, C. S.

2003-01-01

The NASA Office of Space Science is expanding opportunities to propose missions to comets, asteroids, and other solar system targets. The Discovery Program continues to be popular, with two sample return missions, Stardust and Genesis, currently in operation. The New Frontiers Program, a new proposal opportunity modeled on the successful Discovery Program, begins this year with the release of its first Announcement of Opportunity. Project Prometheus, a program to develop nuclear electric power and propulsion technology intended to enable a new class of high-power, high-capability investigations, is a third opportunity to propose solar system exploration. All three classes of mission include a commitment to provide data to the Planetary Data System, any samples to the NASA Curatorial Facility at Johnson Space Center, and programs for education and public outreach.

Self-awareness assessment during cognitive rehabilitation in children with acquired brain injury: a feasibility study and proposed model of child anosognosia.

PubMed

Krasny-Pacini, Agata; Limond, Jennifer; Evans, Jonathan; Hiebel, Jean; Bendjelida, Karim; Chevignard, Mathilde

2015-01-01

To compare three ways of assessing self-awareness in children with traumatic brain injury (TBI) and to propose a model of child anosognosia. Five single cases of children with severe TBI, aged 8-14, undergoing metacognitive training. Awareness was assessed using three different measures: two measures of metacognitive knowledge/intellectual awareness (a questionnaire and illustrated stories where child characters have everyday problems related to their executive dysfunction) and one measure of on-line/emergent awareness (post-task appraisal of task difficulty). All three measures showed good feasibility. Analysis of awareness deficit scores indicated large variability (1-100%). Three children showed dissociated scores. Based on these results, we propose a model of child self-awareness and anosognosia and a framework for awareness assessment for rehabilitation purposes. The model emphasizes (1) the role of on-line error detection in the construction of autobiographical memories that allow a child to build a self-knowledge of his/her strengths and difficulties; (2) the multiple components of awareness that need to be assessed separately; (3) the implications for rehabilitation: errorless versus error-based learning, rehabilitation approaches based on metacognition, rationale for rehabilitation intervention based on child's age and impaired awareness component, ethical and developmental consideration of confrontational methods. Self-awareness has multiple components that need to be assessed separately, to better adapt cognitive rehabilitation. Using questionnaires and discrepancy scores are not sufficient to assess awareness, because it does not include on-line error detection, which can be massively impaired in children, especially those with impaired executive functions. On-line error detection is important to promote and error-based learning is useful to allow a child to build a self-knowledge of his/her strengths and difficulties, in the absence of severe episodic

Validation of Proposed DSM-5 Criteria for Autism Spectrum Disorder

PubMed Central

Frazier, Thomas W.; Youngstrom, Eric A.; Speer, Leslie; Embacher, Rebecca; Law, Paul; Constantino, John; Findling, Robert L.; Hardan, Antonio Y.; Eng, Charis

2011-01-01

Objective The primary aim of the present study was to evaluate the validity of proposed DSM-5 criteria for Autism Spectrum Disorder (ASD). Method We analyzed symptoms from 14,744 siblings (8,911 ASD; 5,863 non-ASD) included in a national registry, the Interactive Autism Network. Youth aged 2–18 were included if at least one child in the family was diagnosed with ASD. Caregivers reported symptoms using the Social Responsiveness Scale and the Social Communication Questionnaire. The structure of autism symptoms was examined using latent variable models that included categories, dimensions, or hybrid models specifying categories and sub-dimensions. Diagnostic efficiency statistics evaluated the proposed DSM-5 algorithm in identifying ASD. Results A hybrid model that included both a category (ASD vs. non-ASD) and two symptom dimensions (social communication/interaction and restricted/repetitive behaviors) was more parsimonious than all other models and replicated across measures and sub-samples. Empirical classifications from this hybrid model closely mirrored clinical ASD diagnoses (90% overlap), implying a broad ASD category distinct from non-ASD. DSM-5 criteria had superior specificity relative to DSM-IV-TR criteria (.97 vs. .86), however sensitivity was lower (.81 vs. .95). Relaxing DSM-5 criteria by requiring one less symptom criterion increased sensitivity (.93 vs. .81), with minimal reduction in specificity (.95 vs. .97). Conclusions Results supported the validity of proposed DSM-5 criteria for ASD as provided in Phase I field trials criteria. Increased specificity of DSM-5 relative to DSM-IV-TR may reduce false positive diagnoses, a particularly relevant consideration for low base rate clinical settings. Phase II testing of DSM-5 should consider a relaxed algorithm, without which as many as 12% of ASD-affected individuals, particularly females, will be missed. Relaxed DSM-5 criteria may improve identification of ASD, decreasing societal costs through

On nonlocally interacting metrics, and a simple proposal for cosmic acceleration

NASA Astrophysics Data System (ADS)

Vardanyan, Valeri; Akrami, Yashar; Amendola, Luca; Silvestri, Alessandra

2018-03-01

We propose a simple, nonlocal modification to general relativity (GR) on large scales, which provides a model of late-time cosmic acceleration in the absence of the cosmological constant and with the same number of free parameters as in standard cosmology. The model is motivated by adding to the gravity sector an extra spin-2 field interacting nonlocally with the physical metric coupled to matter. The form of the nonlocal interaction is inspired by the simplest form of the Deser-Woodard (DW) model, α R1/squareR, with one of the Ricci scalars being replaced by a constant m2, and gravity is therefore modified in the infrared by adding a simple term of the form m21/squareR to the Einstein-Hilbert term. We study cosmic expansion histories, and demonstrate that the new model can provide background expansions consistent with observations if m is of the order of the Hubble expansion rate today, in contrast to the simple DW model with no viable cosmology. The model is best fit by w0~‑1.075 and wa~0.045. We also compare the cosmology of the model to that of Maggiore and Mancarella (MM), m2R1/square2R, and demonstrate that the viable cosmic histories follow the standard-model evolution more closely compared to the MM model. We further demonstrate that the proposed model possesses the same number of physical degrees of freedom as in GR. Finally, we discuss the appearance of ghosts in the local formulation of the model, and argue that they are unphysical and harmless to the theory, keeping the physical degrees of freedom healthy.

Can theory be embedded in visual interventions to promote self-management? A proposed model and worked example.

PubMed

Williams, B; Anderson, A S; Barton, K; McGhee, J

2012-12-01

Nurses are increasingly involved in a range of strategies to encourage patient behaviours that improve self-management. If nurses are to be involved in, or indeed lead, the development of such interventions then processes that enhance the likelihood that they will lead to evidence that is both robust and usable in practice are required. Although behavioural interventions have been predominantly based on written text or the spoken word increasing numbers are now drawing on visual media to communicate their message, despite only a growing evidence base to support it. The use of such media in health interventions is likely to increase due to technological advances enabling easier and cheaper production, and an increasing social preference for visual forms of communication. However, the development of such media is often highly pragmatic and developed intuitively rather than with theory and evidence informing their content and form. Such a process may be at best inefficient and at worst potentially harmful. This paper performs two functions. Firstly, it discusses and argues why visual based interventions may be a powerful media for behaviour change; and secondly, it proposes a model, developed from the MRC Framework for the Development and Evaluation of Complex Interventions, to guide the creation of theory informed visual interventions. It employs a case study of the development of an intervention to motivate involvement in a lifestyle intervention among people with increased cardiovascular risk. In doing this we argue for a step-wise model which includes: (1) the identification of a theoretical basis and associated concepts; (2) the development of visual narrative to establish structure; (3) the visual rendering of narrative and concepts; and (4) the assessment of interpretation and impact among the intended patient group. We go on to discuss the theoretical and methodological limitations of the model. Copyright © 2012 Elsevier Ltd. All rights reserved.

On the recently proposed mimetic Dark Matter

NASA Astrophysics Data System (ADS)

Golovnev, Alexey

2014-01-01

Recently, an interesting gravitational model was proposed in order to mimic the effect of Dark Matter. Chamseddine and Mukhanov in the arXiv preprint 1308.5410 have separated the conformal mode of a physical metric in the form of a squared gradient of an auxiliary scalar field. Notably, the variational principle has given a more general equation of motion than that of purely Einsteinian relativity theory, with a possibility of reproducing an effective Dark Matter. In this short Letter, we explain the nature of this phenomenon in terms of the class of functions on which the variation takes place. Then we give a more transparent equivalent formulation of the model without an auxiliary metric. Finally, we speculate a bit about possible extensions.

An efficient interpolation technique for jump proposals in reversible-jump Markov chain Monte Carlo calculations

PubMed Central

Farr, W. M.; Mandel, I.; Stevens, D.

2015-01-01

Selection among alternative theoretical models given an observed dataset is an important challenge in many areas of physics and astronomy. Reversible-jump Markov chain Monte Carlo (RJMCMC) is an extremely powerful technique for performing Bayesian model selection, but it suffers from a fundamental difficulty and it requires jumps between model parameter spaces, but cannot efficiently explore both parameter spaces at once. Thus, a naive jump between parameter spaces is unlikely to be accepted in the Markov chain Monte Carlo (MCMC) algorithm and convergence is correspondingly slow. Here, we demonstrate an interpolation technique that uses samples from single-model MCMCs to propose intermodel jumps from an approximation to the single-model posterior of the target parameter space. The interpolation technique, based on a kD-tree data structure, is adaptive and efficient in modest dimensionality. We show that our technique leads to improved convergence over naive jumps in an RJMCMC, and compare it to other proposals in the literature to improve the convergence of RJMCMCs. We also demonstrate the use of the same interpolation technique as a way to construct efficient ‘global’ proposal distributions for single-model MCMCs without prior knowledge of the structure of the posterior distribution, and discuss improvements that permit the method to be used in higher dimensional spaces efficiently. PMID:26543580

The Proposal Project

ERIC Educational Resources Information Center

Pierce, Elizabeth

2007-01-01

The proposal project stretches over a significant portion of the semester-long sophomore course Professional Communication (ENG 250) at Monroe Community College. While developing their proposal project, students need to use time management skills to successfully complete a quality project on time. In addition, excellent oral and written…

Selection of Sustainable Technology for VOC Abatement in an Industry: An Integrated AHP-QFD Approach

NASA Astrophysics Data System (ADS)

Gupta, Alok Kumar; Modi, Bharat A.

2018-04-01

Volatile organic compounds (VOCs) are universally present in global atmospheric pollutants. These VOCs are responsible for photo chemical reaction in atmosphere leading to serious harmful effects on human health and environment. VOCs are produced from both natural and man-made sources and may have good commercial value if it can be utilized as alternate fuel. As per data from US EPA, 15% of total VOC emissions are generated from surface coating industry but VOC concentration and exhaust air volume varies to a great extent and is dependent on processes used by industry. Various technologies are available for abatement of VOCs. Physical, Chemical and Biological technologies are available to remove VOCs by either recovery or destruction with many advantages and limitations. With growing environmental awareness and considering the resource limitations of medium and small scale industries, requirement of a tool for selecting appropriate techno economically viable solution for removal of VOCs from industrial process exhaust is envisaged. The aim of the present study is to provide management a tool to determine the overall effect of implementation of VOC abatement technology on business performance and VOC emissions. The primary purpose of this work is to outline a methodology to rate various VOC abatement technologies with respect to the constraint of meeting current and foreseeable future regulatory requirements, operational flexibility and Over All Economics Parameters considering conservation of energy. In this paper an integrated approach has been proposed to select most appropriate abatement technology strategically. Analytical hierarchy process and Quality function deployment have been integrated for Techno-commercial evaluation. A case study on selection of VOC abatement technology for a leading aluminium foil surface coating, lamination and printing facility using this methodology is presented in this study.

Standardizing an approach to the evaluation of implementation science proposals.

PubMed

Crable, Erika L; Biancarelli, Dea; Walkey, Allan J; Allen, Caitlin G; Proctor, Enola K; Drainoni, Mari-Lynn

2018-05-29

The fields of implementation and improvement sciences have experienced rapid growth in recent years. However, research that seeks to inform health care change may have difficulty translating core components of implementation and improvement sciences within the traditional paradigms used to evaluate efficacy and effectiveness research. A review of implementation and improvement sciences grant proposals within an academic medical center using a traditional National Institutes of Health framework highlighted the need for tools that could assist investigators and reviewers in describing and evaluating proposed implementation and improvement sciences research. We operationalized existing recommendations for writing implementation science proposals as the ImplemeNtation and Improvement Science Proposals Evaluation CriTeria (INSPECT) scoring system. The resulting system was applied to pilot grants submitted to a call for implementation and improvement science proposals at an academic medical center. We evaluated the reliability of the INSPECT system using Krippendorff's alpha coefficients and explored the utility of the INSPECT system to characterize common deficiencies in implementation research proposals. We scored 30 research proposals using the INSPECT system. Proposals received a median cumulative score of 7 out of a possible score of 30. Across individual elements of INSPECT, proposals scored highest for criteria rating evidence of a care or quality gap. Proposals generally performed poorly on all other criteria. Most proposals received scores of 0 for criteria identifying an evidence-based practice or treatment (50%), conceptual model and theoretical justification (70%), setting's readiness to adopt new services/treatment/programs (54%), implementation strategy/process (67%), and measurement and analysis (70%). Inter-coder reliability testing showed excellent reliability (Krippendorff's alpha coefficient 0.88) for the application of the scoring system overall and

Design of Work Facilities for Reducing Musculoskeletal Disorders Risk in Paper Pallet Assembly Station

NASA Astrophysics Data System (ADS)

Mardi Safitri, Dian; Arfi Nabila, Zahra; Azmi, Nora

2018-03-01

Musculoskeletal Disorders (MSD) is one of the ergonomic risks due to manual activity, non-neutral posture and repetitive motion. The purpose of this study is to measure risk and implement ergonomic interventions to reduce the risk of MSD on the paper pallet assembly work station. Measurements to work posture are done by Ovako Working Posture Analysis (OWAS) methods and Rapid Entire Body Assessment (REBA) method, while the measurement of work repetitiveness was using Strain Index (SI) method. Assembly processes operators are identified has the highest risk level. OWAS score, Strain Index, and REBA values are 4, 20.25, and 11. Ergonomic improvements are needed to reduce that level of risk. Proposed improvements will be developed using the Quality Function Deployment (QFD) method applied with Axiomatic House of Quality (AHOQ) and Morphological Chart. As the result, risk level based on OWAS score & REBA score turn out from 4 & 11 to be 1 & 2. Biomechanics analysis of the operator also shows the decreasing values for L4-L5 moment, compression, joint shear, and joint moment strength.

XMM-Newton Proposal 03033401

NASA Astrophysics Data System (ADS)

Ghosh, Kajal

2004-10-01

We have detected a highly blueshifted (7.6 keV at the source frame) emission feature in the ASCA spectra of the unusual Narrow-line Seyfert 1 galaxy RX J0136.9-3510. At ASCA resolution it is impossible to tell if the feature is a single line or a combination of lines nor if the feature is due to He-like or H-like Fe. The line profile can tell us where the bulk of the emission origin- ates: A low velocity dispersion would favor a wind/outflow origin, while a hi- gher dispersion may allow for an ionized disk reflection origin. Strong absor- ption and resonant scattering could also produce blueshifted line. To acquire better resolution spectrum to constrain the origin of the line via detailed physical modeling, we propose 50 ks XMM-Newton observations of RXJ0136.9-3510.

Mathematical Modelling in Engineering: A Proposal to Introduce Linear Algebra Concepts

ERIC Educational Resources Information Center

Cárcamo Bahamonde, Andrea; Gómez Urgelles, Joan; Fortuny Aymemí, Josep

2016-01-01

The modern dynamic world requires that basic science courses for engineering, including linear algebra, emphasise the development of mathematical abilities primarily associated with modelling and interpreting, which are not exclusively calculus abilities. Considering this, an instructional design was created based on mathematical modelling and…

Proposed SPR Section Bylaws

NASA Astrophysics Data System (ADS)

Russell, C. T.

Each of the sections of AGU has been requested by Council to adopt a set of bylaws. The Union has provided a set of model bylaws that each section can adapt to its own particular needs. At t h e request of Bob Helliwell, I have taken the model bylaws and attempted to alter them to better reflect the needs of the SPR Section. I n doing so, I have made several proposed changes in t h e operation of the SPR Section. The first one to note is that the draft bylaws call for only three sections and not four. This is to create three more equal subdivisions in SPR. Even with the SC and SS section programs combined, as SS and SC have been at recent meetings, they have not sustained a full program during the meeting. The other important change is a limitation on the term of the secretaries. This is not any reflection on the past or present performance of our secretaries but rather an acknowledgment of the strong influence that they wield on t h e intellectual directions of the section and the feeling that this influence should be shared among many individuals over the course of time. The section does not lack talented individuals who would be good secretaries.

An Alternative Proposal for the Graphical Representation of Anticolor Charge

NASA Astrophysics Data System (ADS)

Wiener, Gerfried J.; Schmeling, Sascha M.; Hopf, Martin

2017-11-01

We have developed a learning unit based on the Standard Model of particle physics, featuring novel typographic illustrations of elementary particles and particle systems. Since the unit includes antiparticles and systems of antiparticles, a visualization of anticolor charge was required. We propose an alternative to the commonly used complementary-color method, whereby antiparticles and antiparticle systems are identified through the use of stripes instead of a change in color. We presented our proposal to high school students and physics teachers, who evaluated it to be a more helpful way of distinguishing between color charge and anticolor charge.

The noise impact of proposed runway alternatives at Craig Airport

NASA Technical Reports Server (NTRS)

Deloach, R.

1982-01-01

Four proposed runway expansion alternatives at Craig Airport in Jacksonville, Florida have been assessed with respect to their forecasted noise impact in the year 2005. The assessment accounts for population distributions around the airport and human subjective response to noise, as well as the distribution of noise levels in the surrounding community (footprints). The impact analysis was performed using the Airport-noise Levels and Annoyance Model (ALAMO), an airport community response model recently developd at Langley Research Center.

An Investigation of Proposed Techniques for Quantifying Confidence in Assurance Arguments

NASA Technical Reports Server (NTRS)

Graydon, Patrick J.; Holloway, C. Michael

2016-01-01

The use of safety cases in certification raises the question of assurance argument sufficiency and the issue of confidence (or uncertainty) in the argument's claims. Some researchers propose to model confidence quantitatively and to calculate confidence in argument conclusions. We know of little evidence to suggest that any proposed technique would deliver trustworthy results when implemented by system safety practitioners. Proponents do not usually assess the efficacy of their techniques through controlled experiment or historical study. Instead, they present an illustrative example where the calculation delivers a plausible result. In this paper, we review current proposals, claims made about them, and evidence advanced in favor of them. We then show that proposed techniques can deliver implausible results in some cases. We conclude that quantitative confidence techniques require further validation before they should be recommended as part of the basis for deciding whether an assurance argument justifies fielding a critical system.

24 CFR 1000.118 - What recourse does a recipient have if HUD disapproves a proposal to provide assistance to non...

Code of Federal Regulations, 2010 CFR

2010-04-01

... low-income Indian families or a model housing activity? (a) Within thirty calendar days of receiving HUD's denial of a proposal to provide assistance to non low-income Indian families or a model housing... if HUD disapproves a proposal to provide assistance to non low-income Indian families or a model...

Integrating Women's Issues in the Social Work Curriculum: A Proposal.

ERIC Educational Resources Information Center

Carter, Carolyn; And Others

1994-01-01

Social work faculty revising courses at Arizona State University's School of Social Work attempting to integrate content on women propose that development of new models reflecting women's experiences are required. Examples of curricular changes made using this approach are offered. They address direct practice, family practice,…

Usability Prediction & Ranking of SDLC Models Using Fuzzy Hierarchical Usability Model

NASA Astrophysics Data System (ADS)

Gupta, Deepak; Ahlawat, Anil K.; Sagar, Kalpna

2017-06-01

Evaluation of software quality is an important aspect for controlling and managing the software. By such evaluation, improvements in software process can be made. The software quality is significantly dependent on software usability. Many researchers have proposed numbers of usability models. Each model considers a set of usability factors but do not cover all the usability aspects. Practical implementation of these models is still missing, as there is a lack of precise definition of usability. Also, it is very difficult to integrate these models into current software engineering practices. In order to overcome these challenges, this paper aims to define the term `usability' using the proposed hierarchical usability model with its detailed taxonomy. The taxonomy considers generic evaluation criteria for identifying the quality components, which brings together factors, attributes and characteristics defined in various HCI and software models. For the first time, the usability model is also implemented to predict more accurate usability values. The proposed system is named as fuzzy hierarchical usability model that can be easily integrated into the current software engineering practices. In order to validate the work, a dataset of six software development life cycle models is created and employed. These models are ranked according to their predicted usability values. This research also focuses on the detailed comparison of proposed model with the existing usability models.

A proposed origin of the Olympus Mons escarpment. [Martian volcanic feature

NASA Technical Reports Server (NTRS)

King, J. S.; Riehle, J. R.

1974-01-01

Olympus Mons (Nix Olympica) on Mars is delimited by a unique steep, nearly circular scarp. A pyroclastic model is proposed for the construct's origin. It is postulated that the Olympus Mons plateau is constructed predominantly of numerous ash-flow tuffs which were erupted from central sources over an extended period of time. Lava flows may be intercalated with the tuffs. A schematic radial profile incorporating the inferred compaction zones for an ash sheet is proposed. Following emplacement, eolian (and possibly fluvial) erosion and abrasion during dust storms would act on the ash sheets. Interior portions of the sheets would spall and slump following eolian erosion, generating steep, relatively smooth boundary scarps. The scarp would be circular due to symmetrical distribution of compaction zones. The model implies further that the Olympus Mons plateau rests on a more resistant rock substrate.

76 FR 57715 - Proposed Information Collection; Comment Request; Fisheries in the Western Pacific; Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration Proposed Information Collection; Comment Request; Fisheries in the Western Pacific; Proposed Information Collection; Seabird... opportunity to comment on proposed and/or continuing information collections, as required by the Paperwork...

Spitzer Space Telescope proposal process

NASA Astrophysics Data System (ADS)

Laine, S.; Silbermann, N. A.; Rebull, L. M.; Storrie-Lombardi, L. J.

2006-06-01

This paper discusses the Spitzer Space Telescope General Observer proposal process. Proposals, consisting of the scientific justification, basic contact information for the observer, and observation requests, are submitted electronically using a client-server Java package called Spot. The Spitzer Science Center (SSC) uses a one-phase proposal submission process, meaning that fully-planned observations are submitted for most proposals at the time of submission, not months after acceptance. Ample documentation and tools are available to the observers on SSC web pages to support the preparation of proposals, including an email-based Helpdesk. Upon submission proposals are immediately ingested into a database which can be queried at the SSC for program information, statistics, etc. at any time. Large proposals are checked for technical feasibility and all proposals are checked against duplicates of already approved observations. Output from these tasks is made available to the Time Allocation Committee (TAC) members. At the review meeting, web-based software is used to record reviewer comments and keep track of the voted scores. After the meeting, another Java-based web tool, Griffin, is used to track the approved programs as they go through technical reviews, duplication checks and minor modifications before the observations are released for scheduling. In addition to detailing the proposal process, lessons learned from the first two General Observer proposal calls are discussed.

An Alternative Proposal for the Graphical Representation of Anticolor Charge

ERIC Educational Resources Information Center

Wiener, Gergried J.; Schmeling, Sascha M.; Hopf, Martin

2017-01-01

We have developed a learning unit based on the Standard Model of particle physics, featuring novel typographic illustrations of elementary particles and particle systems. Since the unit includes antiparticles and systems of antiparticles, a visualization of anticolor charge was required. We propose an alternative to the commonly used…

Programming in a proposed 9X distributed Ada

NASA Technical Reports Server (NTRS)

Waldrop, Raymond S.; Volz, Richard A.; Goldsack, Stephen J.; Holzbach-Valero, A. A.

1991-01-01

The studies of the proposed Ada 9X constructs for distribution, now referred to as AdaPT are reported. The goals for this time period were to revise the chosen example scenario and to begin studying about how the proposed constructs might be implemented. The example scenario chosen is the Submarine Combat Information Center (CIC) developed by IBM for the Navy. The specification provided by IBM was preliminary and had several deficiencies. To address these problems, some changes to the scenario specification were made. Some of the more important changes include: (1) addition of a system database management function; (2) addition of a fourth processing unit to the standard resources; (3) addition of an operator console interface function; and (4) removal of the time synchronization function. To implement the CIC scenario in AdaPT, the decided strategy were publics, partitions, and nodes. The principle purpose for implementing the CIC scenario was to demonstrate how the AdaPT constructs interact with the program structure. While considering ways that the AdaPt constructs might be translated to Ada 83, it was observed that the partition construct could reasonably be modeled as an abstract data type. Although this gives a useful method of modeling partitions, it does not at all address the configuration aspects on the node construct.

Lumbopelvic muscle activation patterns in three stances under graded loading conditions: Proposing a tensegrity model for load transfer through the sacroiliac joints.

PubMed

Pardehshenas, Hamed; Maroufi, Nader; Sanjari, Mohammad Ali; Parnianpour, Mohamad; Levin, Stephen M

2014-10-01

the lumbopelvic region uses a similar strategy for load transfer in both double and single leg support positions which is not compatible with the arch analogy. Our findings are more consistent with a suspensory system (wire-spoke wheel model). If our proposed model holds true, the pelvic ring can only be integrated by adjusting tension in the spokes and by preserving rim integrity or continuity. Thus, we propose that in order to restore tension integrity throughout the pelvic ring, efforts to unlock restrictions, muscular correction of positional faults and lumbopelvic or even respiratory exercises following sacroiliac joint dysfunctions must be taken into consideration. Our hypothetical model may initiate thinking and act as a guide to future work based on a biomechanical approach to the problem of sacroiliac joint dysfunction. Copyright © 2014 Elsevier Ltd. All rights reserved.

76 FR 10530 - Supplemental Proposed Rule of Source Specific Federal Implementation Plan for Implementing Best...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-25

... proposed post-control BART limit of 0.012 lb/MMBtu on Units 1-3. C. Modeling and Demonstrating Reasonable... a different alternative emissions control strategy would achieve more progress than EPA's BART... Background for Proposing To Approve an Alternative Emissions Control Strategy as Achieving Better Progress...

Generic Community System Specification: A Proposed Format for Reporting the Results of Microgrid Optimization Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jimenez, Antonio

This document provides a proposed format for reporting the results of microgrid optimization analysis. While the proposed format assumes that the modeling is conducted as part of a renewable energy retrofit of an existing diesel micro-grid, the format can certainly be adopted for other situations.

The effect of proposed software products' features on the satisfaction and dissatisfaction of potential customers

NASA Astrophysics Data System (ADS)

Hussain, Azham; Mkpojiogu, Emmanuel O. C.; Yusof, Muhammad Mat

2016-08-01

This paper reports the effect of proposed software products features on the satisfaction and dissatisfaction of potential customers of proposed software products. Kano model's functional and dysfunctional technique was used along with Berger et al.'s customer satisfaction coefficients. The result shows that only two features performed the most in influencing the satisfaction and dissatisfaction of would-be customers of the proposed software product. Attractive and one-dimensional features had the highest impact on the satisfaction and dissatisfaction of customers. This result will benefit requirements analysts, developers, designers, projects and sales managers in preparing for proposed products. Additional analysis showed that the Kano model's satisfaction and dissatisfaction scores were highly related to the Park et al.'s average satisfaction coefficient (r=96%), implying that these variables can be used interchangeably or in place of one another to elicit customer satisfaction. Furthermore, average satisfaction coefficients and satisfaction and dissatisfaction indexes were all positively and linearly correlated.

A proposal of a renormalizable Nambu-Jona-Lasinio model

NASA Astrophysics Data System (ADS)

Cabo Montes de Oca, Alejandro

2018-03-01

A local and gauge invariant gauge field model including Nambu-Jona-Lasinio (NJL) and QCD Lagrangian terms in its action is introduced. Surprisingly, it becomes power counting renormalizable. This occurs thanks to the presence of action terms which modify the quark propagators, to become more decreasing that the Dirac one at large momenta in a Lee-Wick form, implying power counting renormalizability. The appearance of finite quark masses already in the tree approximation in the scheme is determined by the fact that the new action terms explicitly break chiral invariance. In this starting work we present the renormalized Feynman diagram expansion of the model and derive the formula for the degree of divergence of the diagrams. An explanation for the usual exclusion of the added Lagrangian terms is presented. In addition, the primitíve divergent graphs are identified. We start their evaluation by calculating the simpler contribution to the gluon polarization operator. The divergent and finite parts both result transverse as required by gauge invariance. The full evaluation of the various primitive divergences, which are required for completely defining the counterterm Feynman expansion will be considered in coming works, for further allowing to discuss the flavour symmetry breaking and unitarity.

50 CFR 402.48 - Conference on proposed species or proposed critical habitat.

Code of Federal Regulations, 2014 CFR

2014-10-01

... OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS SUBCHAPTER A INTERAGENCY COOPERATION-ENDANGERED SPECIES ACT OF 1973, AS AMENDED Counterpart Regulations... Rodenticide Act § 402.48 Conference on proposed species or proposed critical habitat. EPA may employ the...

50 CFR 402.48 - Conference on proposed species or proposed critical habitat.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS SUBCHAPTER A INTERAGENCY COOPERATION-ENDANGERED SPECIES ACT OF 1973, AS AMENDED Counterpart Regulations Governing Actions... Act § 402.48 Conference on proposed species or proposed critical habitat. EPA may employ the...

50 CFR 402.48 - Conference on proposed species or proposed critical habitat.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS SUBCHAPTER A INTERAGENCY COOPERATION-ENDANGERED SPECIES ACT OF 1973, AS AMENDED Counterpart Regulations... Rodenticide Act § 402.48 Conference on proposed species or proposed critical habitat. EPA may employ the...

50 CFR 402.48 - Conference on proposed species or proposed critical habitat.

Code of Federal Regulations, 2013 CFR

2013-10-01

... OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS SUBCHAPTER A INTERAGENCY COOPERATION-ENDANGERED SPECIES ACT OF 1973, AS AMENDED Counterpart Regulations... Rodenticide Act § 402.48 Conference on proposed species or proposed critical habitat. EPA may employ the...

50 CFR 402.48 - Conference on proposed species or proposed critical habitat.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS SUBCHAPTER A INTERAGENCY COOPERATION-ENDANGERED SPECIES ACT OF 1973, AS AMENDED Counterpart Regulations Governing Actions... Act § 402.48 Conference on proposed species or proposed critical habitat. EPA may employ the...

Language acquisition is model-based rather than model-free.

PubMed

Wang, Felix Hao; Mintz, Toben H

2016-01-01

Christiansen & Chater (C&C) propose that learning language is learning to process language. However, we believe that the general-purpose prediction mechanism they propose is insufficient to account for many phenomena in language acquisition. We argue from theoretical considerations and empirical evidence that many acquisition tasks are model-based, and that different acquisition tasks require different, specialized models.

A proposed cell model for multiple-occurrence regional landslide events: Implications for landslide susceptibility mapping

NASA Astrophysics Data System (ADS)

Crozier, M. J.

2017-10-01

Multiple-occurrence regional landslide events (MORLEs) consist of hundreds to thousands of shallow landslides occurring more or less simultaneously within defined areas, ranging from tens to thousands of square kilometres. While MORLEs can be triggered by rainstorms and earthquakes, this paper is confined to those landslide events triggered by rainstorms. Globally, MORLEs occur in a range of geological settings in areas of moderate to steep slopes subject to intense rainstorms. Individual landslides in rainstorm-triggered events are dominantly small, shallow debris and earth flows, and debris and earth slides involving regolith or weathered bedrock. The model used to characterise these events assumes that energy distribution within the event area is represented on the land surface by a cell structure; with maximum energy expenditure within an identifiable core and rapid dissipation concentrically away from the centre. The version of the model presented here has been developed for rainfall-triggered landslide events. It proposes that rainfall intensity can be used to determine different critical landslide response zones within the cell (referred to as core, middle, and periphery zones). These zones are most readily distinguished by two conditions: the proportion of the slope that fails and the particular type of the slope stability factor that assumes dominance in determining specific sites of landslide occurrence. The latter condition means that the power of any slope stability factor to distinguish between stable and unstable sites varies throughout the affected area in accordance with the landslide response zones within the cell; certain factors critical for determining the location of landslide sites in one part of the event area have little influence in other parts of the event area. The implication is that landslide susceptibility maps (and subsequently derived mitigation measures) based on conventional slope stability factors may have only limited validity

Composite Pseudoclassical Models of Quarks

NASA Astrophysics Data System (ADS)

Musin, Yu. R.

2018-05-01

Composite models of quarks are proposed, analogous to composite models of leptons. A model-based explanation of the appearance of generations of fundamental particles in the Standard Model is given. New empirical formulas are proposed for the quark masses, modifying Barut's well-known formula.

Generalized Ordinary Differential Equation Models.

PubMed

Miao, Hongyu; Wu, Hulin; Xue, Hongqi

2014-10-01

Existing estimation methods for ordinary differential equation (ODE) models are not applicable to discrete data. The generalized ODE (GODE) model is therefore proposed and investigated for the first time. We develop the likelihood-based parameter estimation and inference methods for GODE models. We propose robust computing algorithms and rigorously investigate the asymptotic properties of the proposed estimator by considering both measurement errors and numerical errors in solving ODEs. The simulation study and application of our methods to an influenza viral dynamics study suggest that the proposed methods have a superior performance in terms of accuracy over the existing ODE model estimation approach and the extended smoothing-based (ESB) method.

'Emerging technologies for the changing global market' - Prioritization methodology for chemical replacement

NASA Technical Reports Server (NTRS)

Cruit, Wendy; Schutzenhofer, Scott; Goldberg, Ben; Everhart, Kurt

1993-01-01

This project served to define an appropriate methodology for effective prioritization of technology efforts required to develop replacement technologies mandated by imposed and forecast legislation. The methodology used is a semiquantitative approach derived from quality function deployment techniques (QFD Matrix). This methodology aims to weight the full environmental, cost, safety, reliability, and programmatic implications of replacement technology development to allow appropriate identification of viable candidates and programmatic alternatives. The results will be implemented as a guideline for consideration for current NASA propulsion systems.

Prioritization Methodology for Chemical Replacement

NASA Technical Reports Server (NTRS)

Cruit, W.; Schutzenhofer, S.; Goldberg, B.; Everhart, K.

1993-01-01

This project serves to define an appropriate methodology for effective prioritization of efforts required to develop replacement technologies mandated by imposed and forecast legislation. The methodology used is a semiquantitative approach derived from quality function deployment techniques (QFD Matrix). This methodology aims to weigh the full environmental, cost, safety, reliability, and programmatic implications of replacement technology development to allow appropriate identification of viable candidates and programmatic alternatives. The results are being implemented as a guideline for consideration for current NASA propulsion systems.

The structure of PTSD symptoms according to DSM-5 and IDC-11 proposal: A multi-sample analysis.

PubMed

Cyniak-Cieciura, M; Staniaszek, K; Popiel, A; Pragłowska, E; Zawadzki, B

2017-07-01

Posttraumatic stress disorder (PTSD) symptoms structure is a subject of ongoing debate since its inclusion in DSM-III classification in 1980. Different research on PTSD symptoms structure proved the better fit of four-factor and five-factor models comparing to the one proposed by DSM-IV. With the publication of DSM-5 classification, which introduced significant changes to PTSD diagnosis, the question arises about the adequacy of the proposed criteria to the real structure of disorder symptoms. Recent analyses suggest that seven-factor hybrid model is the best reflection of symptoms structure proposed to date. At the same time, some researchers and ICD-11 classification postulate a simplification of PTSD diagnosis restricting it to only three core criteria and adding additional diagnostic unit of complex-PTSD. This research aimed at checking symptoms' structure according to well-known and supported four-, five-, six- and seven-factor models based on DSM-5 symptoms and the conceptualization proposed by the ICD-11 as well as examining the relation between PTSD symptoms categories with borderline personality disorder. Four different trauma populations were examined with self-reported Posttraumatic Diagnostic Scale for DSM-5 (PDS-5) measure. The results suggest that six- and seven-factor hybrid model as well as three-factor ICD-11 concept fits the data better than other models. The core PTSD symptoms were less related to borderline personality disorder than other, broader, symptoms categories only in one sample. Combination of ICD-11 simplified PTSD diagnosis with the more complex approach (e.g. basing on a seven-factor model) may be an attractive proposal for both scientists and practitioners, however does not necessarily lower its comorbidity with borderline personality disorder. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Impact assessment of WHO TobReg proposals for mandated lowering of selected mainstream cigarette smoke toxicants.

PubMed

Eldridge, Alison C; McAdam, Kevin G; Betson, Tatiana R; Gama, Marcos V; Proctor, Christopher J

2017-06-01

The WHO Tobacco Product Regulation Study Group (TobReg) has proposed three regulatory models for cigarettes, each creating mandatory limits for emissions of nine smoke toxicants. One approach proposes country-specific limits, using median or 1.25× median toxicant/nicotine emission ratios. A second model provides fixed toxicant-ratio limits. The third model limits were three times the lowest toxicant emission on a market. Currently, the practical implications of these models are largely unknown. An impact assessment was conducted using cigarette data from 79 countries to identify four diverse test markets. We sampled all products from each market but limited product availability led to incomplete (80-97%) sourcing. Analysis showed that the country-specific model led to diverse (up to threefold) toxicant limits across the four markets. 70%-80% of products were non-compliant, rising to 100% in some countries with the second and the third models. With each regulatory model the main drivers of non-compliance were the tobacco-specific nitrosamines, the simultaneous application of limits for nine poorly correlated smoke toxicants, and analytical variability. Use of nicotine ratios led to compliance of some high toxicant emission products due to high nicotine emissions. Our findings suggest that these proposals would have greater impact on global markets than TobReg's stated aims. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Egocentric Temporal Action Proposals.

PubMed

Shao Huang; Weiqiang Wang; Shengfeng He; Lau, Rynson W H

2018-02-01

We present an approach to localize generic actions in egocentric videos, called temporal action proposals (TAPs), for accelerating the action recognition step. An egocentric TAP refers to a sequence of frames that may contain a generic action performed by the wearer of a head-mounted camera, e.g., taking a knife, spreading jam, pouring milk, or cutting carrots. Inspired by object proposals, this paper aims at generating a small number of TAPs, thereby replacing the popular sliding window strategy, for localizing all action events in the input video. To this end, we first propose to temporally segment the input video into action atoms, which are the smallest units that may contain an action. We then apply a hierarchical clustering algorithm with several egocentric cues to generate TAPs. Finally, we propose two actionness networks to score the likelihood of each TAP containing an action. The top ranked candidates are returned as output TAPs. Experimental results show that the proposed TAP detection framework performs significantly better than relevant approaches for egocentric action detection.

50 CFR 402.10 - Conference on proposed species or proposed critical habitat.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS SUBCHAPTER A INTERAGENCY COOPERATION-ENDANGERED SPECIES ACT OF 1973, AS AMENDED Consultation Procedures § 402.10 Conference... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Conference on proposed species or proposed...

50 CFR 402.10 - Conference on proposed species or proposed critical habitat.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS SUBCHAPTER A INTERAGENCY COOPERATION-ENDANGERED SPECIES ACT OF 1973, AS AMENDED Consultation Procedures § 402.10 Conference... 50 Wildlife and Fisheries 9 2011-10-01 2011-10-01 false Conference on proposed species or proposed...

Grant Proposal Development a la FLC (Faculty Learning Community) Mode

ERIC Educational Resources Information Center

Frantz, Pollyanne S.

2013-01-01

Although the Faculty Learning Community is not a new structure or initiative in the higher education arena, adapting this model for faculty development focused on grant proposal writing is relatively new. This article describes how the concept developed by Milt Cox of Miami University has been successfully modified and implemented twice on the…

Impact of the proposed energy tax on nuclear electric generating technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edmunds, T.A.; Lamont, A.D.; Pasternak, A.D.

1993-05-01

The President`s new economic initiatives include an energy tax that will affect the costs of power from most electric generating technologies. The tax on nuclear power could be applied in a number of different ways at several different points in the fuel cycle. These different approaches could have different effects on the generation costs and benefits of advanced reactors. The Office of Nuclear Energy has developed models for assessing the costs and benefits of advanced reactor cycles which must be updated to take into account the impacts of the proposed tax. This report has been prepared to assess the spectrummore » of impacts of the energy tax on nuclear power and can be used in updating the Office`s economic models. This study was conducted in the following steps. First, the most authoritative statement of the proposed tax available at this time was obtained. Then the impacts of the proposed tax on the costs of nuclear and fossil fueled generation were compared. Finally several other possible approaches to taxing nuclear energy were evaluated. The cost impact on several advanced nuclear technologies and a current light water technology were computed. Finally, the rationale for the energy tax as applied to various electric generating methods was examined.« less

75 FR 23822 - Notice of Opportunity for Public Comment on the Proposed Models for Plant-Specific Adoption of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-04

... Agencywide Documents Access and Management System (ADAMS) under Accession Number ML092670242. The proposed... and Maintenance Program'' is being proposed for Section [5.5] [``Administrative Controls--Programs and... and Management System (ADAMS): Publicly available documents created or received at the NRC are...

Parent and family impact of autism spectrum disorders: a review and proposed model for intervention evaluation.

PubMed

Karst, Jeffrey S; Van Hecke, Amy Vaughan

2012-09-01

Raising a child with an autism spectrum disorder (ASD) can be an overwhelming experience for parents and families. The pervasive and severe deficits often present in children with ASD are associated with a plethora of difficulties in caregivers, including decreased parenting efficacy, increased parenting stress, and an increase in mental and physical health problems compared with parents of both typically developing children and children with other developmental disorders. In addition to significant financial strain and time pressures, high rates of divorce and lower overall family well-being highlight the burden that having a child with an ASD can place on families. These parent and family effects reciprocally and negatively impact the diagnosed child and can even serve to diminish the positive effects of intervention. However, most interventions for ASD are evaluated only in terms of child outcomes, ignoring parent and family factors that may have an influence on both the immediate and long-term effects of therapy. It cannot be assumed that even significant improvements in the diagnosed child will ameliorate the parent and family distress already present, especially as the time and expense of intervention can add further family disruption. Thus, a new model of intervention evaluation is proposed, which incorporates these factors and better captures the transactional nature of these relationships.

To the Cloud! A Grassroots Proposal to Accelerate Brain Science Discovery

PubMed Central

Vogelstein, Joshua T.; Mensh, Brett; Hausser, Michael; Spruston, Nelson; Evans, Alan; Kording, Konrad; Amunts, Katrin; Ebell, Christoph; Muller, Jeff; Telefont, Martin; Hill, Sean; Koushika, Sandhya P.; Cali, Corrado; Valdés-Sosa, Pedro Antonio; Littlewood, Peter; Koch, Christof; Saalfeld, Stephan; Kepecs, Adam; Peng, Hanchuan; Halchenko, Yaroslav O.; Kiar, Gregory; Poo, Mu-Ming; Poline, Jean-Baptiste; Milham, Michael P.; Schaffer, Alyssa Picchini; Gidron, Rafi; Okano, Hideyuki; Calhoun, Vince D; Chun, Miyoung; Kleissas, Dean M.; Vogelstein, R. Jacob; Perlman, Eric; Burns, Randal; Huganir, Richard; Miller, Michael I.

2018-01-01

The revolution in neuroscientific data acquisition is creating an analysis challenge. We propose leveraging cloud-computing technologies to enable large-scale neurodata storing, exploring, analyzing, and modeling. This utility will empower scientists globally to generate and test theories of brain function and dysfunction. PMID:27810005

Clinical Decision Support Alert Appropriateness: A Review and Proposal for Improvement

PubMed Central

McCoy, Allison B.; Thomas, Eric J.; Krousel-Wood, Marie; Sittig, Dean F.

2014-01-01

Background Many healthcare providers are adopting clinical decision support (CDS) systems to improve patient safety and meet meaningful use requirements. Computerized alerts that prompt clinicians about drug-allergy, drug-drug, and drug-disease warnings or provide dosing guidance are most commonly implemented. Alert overrides, which occur when clinicians do not follow the guidance presented by the alert, can hinder improved patient outcomes. Methods We present a review of CDS alerts and describe a proposal to develop novel methods for evaluating and improving CDS alerts that builds upon traditional informatics approaches. Our proposal incorporates previously described models for predicting alert overrides that utilize retrospective chart review to determine which alerts are clinically relevant and which overrides are justifiable. Results Despite increasing implementations of CDS alerts, detailed evaluations rarely occur because of the extensive labor involved in manual chart reviews to determine alert and response appropriateness. Further, most studies have solely evaluated alert overrides that are appropriate or justifiable. Our proposal expands the use of web-based monitoring tools with an interactive dashboard for evaluating CDS alert and response appropriateness that incorporates the predictive models. The dashboard provides 2 views, an alert detail view and a patient detail view, to provide a full history of alerts and help put the patient's events in context. Conclusion The proposed research introduces several innovations to address the challenges and gaps in alert evaluations. This research can transform alert evaluation processes across healthcare settings, leading to improved CDS, reduced alert fatigue, and increased patient safety. PMID:24940129

In Pursuit of Social Betterment: A Proposal to Evaluate the Da Vinci Learning Model

ERIC Educational Resources Information Center

Henry, Gary T.

2005-01-01

The author presents a proposal that is roughly based on a contingency-based theory of evaluation developed in his book, "Evaluation: An Integrated Framework for Understanding, Guiding, and Improving Policies and Programs" (Mark, Henry, and Julnes, 2000). He and his coauthors stated in this book that social betterment was the ultimate goal of…

What Is Everyday Ethics? A Review and a Proposal for an Integrative Concept.

PubMed

Zizzo, Natalie; Bell, Emily; Racine, Eric

2016-01-01

"Everyday ethics" is a term that has been used in the clinical and ethics literature for decades to designate normatively important and pervasive issues in healthcare. In spite of its importance, the term has not been reviewed and analyzed carefully. We undertook a literature review to understand how the term has been employed and defined, finding that it is often contrasted to "dramatic ethics." We identified the core attributes most commonly associated with everyday ethics. We then propose an integrative model of everyday ethics that builds on the contribution of different ethical theories. This model proposes that the function of everyday ethics is to serve as an integrative concept that (1) helps to detect current blind spots in bioethics (that is, shifts the focus from dramatic ethics) and (2) mobilizes moral agents to address these shortcomings of ethical insight. This novel integrative model has theoretical, methodological, practical, and pedagogical implications, which we explore. Because of the pivotal role that moral experience plays in this integrative model, the model could help to bridge empirical ethics research with more conceptual and normative work. Copyright 2016 The Journal of Clinical Ethics. All rights reserved.

Testing the Construct Validity of Proposed Criteria for "DSM-5" Autism Spectrum Disorder

ERIC Educational Resources Information Center

Mandy, William P. L.; Charman, Tony; Skuse, David H.

2012-01-01

Objective: To use confirmatory factor analysis to test the construct validity of the proposed "DSM-5" symptom model of autism spectrum disorder (ASD), in comparison to alternative models, including that described in "DSM-IV-TR." Method: Participants were 708 verbal children and young persons (mean age, 9.5 years) with mild to severe autistic…

Proposal for Microwave Boson Sampling.

PubMed

Peropadre, Borja; Guerreschi, Gian Giacomo; Huh, Joonsuk; Aspuru-Guzik, Alán

2016-09-30

Boson sampling, the task of sampling the probability distribution of photons at the output of a photonic network, is believed to be hard for any classical device. Unlike other models of quantum computation that require thousands of qubits to outperform classical computers, boson sampling requires only a handful of single photons. However, a scalable implementation of boson sampling is missing. Here, we show how superconducting circuits provide such platform. Our proposal differs radically from traditional quantum-optical implementations: rather than injecting photons in waveguides, making them pass through optical elements like phase shifters and beam splitters, and finally detecting their output mode, we prepare the required multiphoton input state in a superconducting resonator array, control its dynamics via tunable and dispersive interactions, and measure it with nondemolition techniques.

The EUVE Proposal Database

NASA Astrophysics Data System (ADS)

Christian, C. A.; Olson, E. C.

1993-01-01

The proposal database and scheduling system for the Extreme Ultraviolet Explorer is described. The proposal database has been implemented to take input for approved observations selected by the EUVE Peer Review Panel and output target information suitable for the scheduling system to digest. The scheduling system is a hybrid of the SPIKE program and EUVE software which checks spacecraft constraints, produces a proposed schedule and selects spacecraft orientations with optimal configurations for acquiring star trackers, etc. This system is used to schedule the In Orbit Calibration activities that took place this summer, following the EUVE launch in early June 1992. The strategy we have implemented has implications for the selection of approved targets, which have impacted the Peer Review process. In addition, we will discuss how the proposal database, founded on Sybase, controls the processing of EUVE Guest Observer data.

Differential Topic Models.

PubMed

Chen, Changyou; Buntine, Wray; Ding, Nan; Xie, Lexing; Du, Lan

2015-02-01

In applications we may want to compare different document collections: they could have shared content but also different and unique aspects in particular collections. This task has been called comparative text mining or cross-collection modeling. We present a differential topic model for this application that models both topic differences and similarities. For this we use hierarchical Bayesian nonparametric models. Moreover, we found it was important to properly model power-law phenomena in topic-word distributions and thus we used the full Pitman-Yor process rather than just a Dirichlet process. Furthermore, we propose the transformed Pitman-Yor process (TPYP) to incorporate prior knowledge such as vocabulary variations in different collections into the model. To deal with the non-conjugate issue between model prior and likelihood in the TPYP, we thus propose an efficient sampling algorithm using a data augmentation technique based on the multinomial theorem. Experimental results show the model discovers interesting aspects of different collections. We also show the proposed MCMC based algorithm achieves a dramatically reduced test perplexity compared to some existing topic models. Finally, we show our model outperforms the state-of-the-art for document classification/ideology prediction on a number of text collections.

A Proposal for a K-12 Sequence of Environmental Education Competencies.

ERIC Educational Resources Information Center

Culbert, Jack; And Others

Presented is an overview and model of the proposed curriculum development process in environmental education in Connecticut. Concepts and competencies are identified at each grade level and are designed to facilitate the infusion of environmental education activities within the existing curricula using existing learning resources such as…

State Assessment Program Item Banks: Model Language for Request for Proposals (RFP) and Contracts

ERIC Educational Resources Information Center

Swanson, Leonard C.

2010-01-01

This document provides recommendations for request for proposal (RFP) and contract language that state education agencies can use to specify their requirements for access to test item banks. An item bank is a repository for test items and data about those items. Item banks are used by state agency staff to view items and associated data; to…

75 FR 26275 - Notice of Lodging of Proposed Consent Decree

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-11

... Oceanic and Atmospheric Administration and the Department of the Interior; the State of Washington; the.... 9607(a); section 311 of the Clean Water Act (CWA), 33 U.S.C. 1321; section 1002(b) of the Oil Pollution Act (OPA), 33 U.S.C. 2702(b); and the Model Toxics Control Act (MTCA), RCW 70.105D. Under the proposed...

Proposed Ordinance for the Regulation of Cable Television. Working Draft.

ERIC Educational Resources Information Center

Chicago City Council, IL.

A model ordinance is proposed for the regulation of cable television in the city of Chicago. It defines the language of the ordinance, sets forth the method of granting franchises, and describes the terms of the franchises. The duties of a commission to regulate cable television are listed and the method of selecting commission members is…

A monograph proposing the use of canine mammary tumours as a model for the study of hereditary breast cancer susceptibility genes in humans.

PubMed

Goebel, Katie; Merner, Nancy D

2017-05-01

Canines are excellent models for cancer studies due to their similar physiology and genomic sequence to humans, companion status and limited intra-breed heterogeneity. Due to their affliction to mammary cancers, canines can serve as powerful genetic models of hereditary breast cancers. Variants within known human breast cancer susceptibility genes only explain a fraction of familial cases. Thus, further discovery is necessary but such efforts have been thwarted by genetic heterogeneity. Reducing heterogeneity is key, and studying isolated human populations have helped in the endeavour. An alternative is to study dog pedigrees, since artificial selection has resulted in extreme homogeneity. Identifying the genetic predisposition to canine mammary tumours can translate to human discoveries - a strategy currently underutilized. To explore this potential, we reviewed published canine mammary tumour genetic studies and proposed benefits of next generation sequencing canine cohorts to facilitate moving beyond incremental advances.

24 CFR 941.606 - Proposal.

Code of Federal Regulations, 2010 CFR

2010-04-01

... proposal, specifying the sources (with respect to each of the proposed categorical uses of all such... necessary, all documents (including applications for financing) relating to the financing of the proposal, including, but not limited to, any loan agreements, notes, mortgages or deeds of trust, use restrictions...

Structure of the Autism Symptom Phenotype: A Proposed Multidimensional Model

ERIC Educational Resources Information Center

Georgiades, Stelios; Szatmari, Peter; Zwaigenbaum, Lonnie; Duku, Eric; Bryson, Susan; Roberts, Wendy; Goldberg, Jeremy; Mahoney, William

2007-01-01

Background: The main objective of this study was to develop a comprehensive, empirical model that would allow the reorganization of the structure of the pervasive developmental disorder symptom phenotype through factor analysis into more homogeneous dimensions. Method: The sample consisted of 209 children with pervasive developmental disorder…

Proposal for a telehealth concept in the translational research model

PubMed Central

Silva, Angélica Baptista; Morel, Carlos Médicis; de Moraes, Ilara Hämmerli Sozzi

2014-01-01

OBJECTIVE To review the conceptual relationship between telehealth and translational research. METHODS Bibliographical search on telehealth was conducted in the Scopus, Cochrane BVS, LILACS and MEDLINE databases to find experiences of telehealth in conjunction with discussion of translational research in health. The search retrieved eight studies based on analysis of models of the five stages of translational research and the multiple strands of public health policy in the context of telehealth in Brazil. The models were applied to telehealth activities concerning the Network of Human Milk Banks, in the Telemedicine University Network. RESULTS The translational research cycle of human milk collected, stored and distributed presents several integrated telehealth initiatives, such as video conferencing, and software and portals for synthesizing knowledge, composing elements of an information ecosystem, mediated by information and communication technologies in the health system. CONCLUSIONS Telehealth should be composed of a set of activities in a computer mediated network promoting the translation of knowledge between research and health services. PMID:24897057

Proposal for a telehealth concept in the translational research model.

PubMed

Silva, Angélica Baptista; Morel, Carlos Médicis; Moraes, Ilara Hämmerli Sozzi de

2014-04-01

To review the conceptual relationship between telehealth and translational research. Bibliographical search on telehealth was conducted in the Scopus, Cochrane BVS, LILACS and MEDLINE databases to find experiences of telehealth in conjunction with discussion of translational research in health. The search retrieved eight studies based on analysis of models of the five stages of translational research and the multiple strands of public health policy in the context of telehealth in Brazil. The models were applied to telehealth activities concerning the Network of Human Milk Banks, in the Telemedicine University Network. The translational research cycle of human milk collected, stored and distributed presents several integrated telehealth initiatives, such as video conferencing, and software and portals for synthesizing knowledge, composing elements of an information ecosystem, mediated by information and communication technologies in the health system. Telehealth should be composed of a set of activities in a computer mediated network promoting the translation of knowledge between research and health services.

77 FR 40090 - Proposed Collection of Information; Comment Request: Biological Sciences Proposal Classification...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-06

... NATIONAL SCIENCE FOUNDATION Proposed Collection of Information; Comment Request: Biological Sciences Proposal Classification Form AGENCY: National Science Foundation. ACTION: Notice. SUMMARY: The... Biological Sciences has a continuing commitment to monitor its information collection in order to preserve...

PACMan to Help Sort Hubble Proposals

NASA Astrophysics Data System (ADS)

Kohler, Susanna

2017-04-01

Every year, astronomers submit over a thousand proposals requesting time on the Hubble Space Telescope (HST). Currently, humans must sort through each of these proposals by hand before sending them off for review. Could this burden be shifted to computers?A Problem of VolumeAstronomer Molly Peeples gathered stats on the HST submissions sent in last week for the upcoming HST Cycle 25 (the deadline was Friday night), relative to previous years. This years proposal round broke the record, with over 1200 proposals submitted in total for Cycle 25. [Molly Peeples]Each proposal cycle for HST time attracts on the order of 1100 proposals accounting for far more HST time than is available. The proposals are therefore carefully reviewed by around 150 international members of the astronomy community during a six-month process to select those with the highest scientific merit.Ideally, each proposal will be read by reviewers that have scientific expertise relevant to the proposal topic: if a proposal requests HST time to study star formation, for instance, then the reviewers assigned to it should have research expertise in star formation.How does this matching of proposals to reviewers occur? The current method relies on self-reported categorization of the submitted proposals. This is unreliable, however; proposals are often mis-categorized by submitters due to misunderstanding or ambiguous cases.As a result, the Science Policies Group at the Space Telescope Science Institute (STScI) which oversees the review of HST proposals must go through each of the proposals by hand and re-categorize them. The proposals are then matched to reviewers with self-declared expertise in the same category.With the number of HST proposals on the rise and the expectation that the upcoming James Webb Space Telescope (JWST) will elicit even more proposals for time than Hubble scientists at STScI and NASA are now asking: could the human hours necessary for this task be spared? Could a computer program

The proposed EU-regulation on clinical trials on medicinal products: an unethical proposal?

PubMed

Heringa, Jilles; Dute, Joseph

2013-09-01

The Commission has proposed a regulation 'on clinical trials on medicinal products for human use' to introduce one regulatory framework for clinical trials in the European Union. This regulation should replace the current clinical trials directive (2001/20/EC). In this article we describe and critically review the main provisions of the proposed regulation. We assess the consequences for a sound authorisation procedure of clinical trials and the level of protection for human subjects. We note that the proposed regulation is inconsistent with applicable international legal documents, such as the Biomedicine Convention and the Declaration of Helsinki. We conclude that the proposed regulation does not ensure a "high level of human health protection"--required by its legal basis in the TFEU--because it may force Member States concerned to accept a reporting Member States' approval of--in their estimation--an unethical clinical trial.

76 FR 36566 - Notice of Submission of Proposed Information Collection to OMB “Logic Model” Grant Performance...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-22

... Proposed Information Collection to OMB ``Logic Model'' Grant Performance Report Standard AGENCY: Office of... proposal. Applicants of HUD Federal Financial Assistance are required to indicate intended results and impacts. Grant recipients report against their baseline performance standards. This process standardizes...

78 FR 9088 - Self-Regulatory Organizations; ICE Clear Europe Limited; Order Approving Proposed Rule Change To...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-07

... Customer Clearing Model for CDS Products and To Amend, Clarify, and Consolidate Certain Rules and... the proposed rule change is to provide for a Customer CDS Clearing Model whereby customers of ICE... changes that are unrelated to Customer CDS Clearing Model. Currently, ICE Clear Europe Clearing Members...

General Oral Health Assessment Index: A new evaluation proposal.

PubMed

Campos, Juliana A D B; Zucoloto, Miriane L; Bonafé, Fernanda S S; Maroco, João

2017-09-01

To validity the General Oral Health Assessment Index (GOHAI) among adults who sought dental care and to present a new proposal for calculating scores on self-perception of oral health. There is no study that presents a GOHAI scores using weight of the items. The one-factor model, the three-factor model (physical function, psychosocial/psychological function and pain/discomfort) and the second-order hierarchical model (SOHM) were evaluated from confirmatory factor analysis (λ, χ 2 /df, CFI,GFI and RMSEA). The reliability (CR,α) was estimated. Concurrent validity was assessed using the Oral Health Impact Profile (OHIP-14). The invariance of the models was estimated in independent samples. The calculation of an overall score using the factor scores was proposed to obtain the overall weighted scores. These overall weighted scores were compared to the scores estimated as the simple arithmetic mean (overall unweighted scores) using a repeated measures analysis of variance. A total of 1000 individuals participated (74.1% female; age: 40.7 (SD=14.3) years). Three items of the GOHAI were excluded (λ<0.40). The one-factor model (λ=0.40-0.77; χ 2 /df=6.291; CFI=0.947; GFI=0.960; RMSEA=0.073) and the three-factor model (λ=0.40-0.78; χ 2 /df=8.321; CFI=0.932; GFI=0.954; RMSEA=0.086) each presented an adequate fit. Reliability was adequate (one-factor: CR=0.83/α=0.83; three-factor: CR=0.53-0.76/α=0.53-0.73), with the exception of the pain/discomfort factor. The GOHAI was invariant in independent samples, and the concurrent validity was adequate. The overall unweighted scores overestimated self-perceptions of oral health when compared with the weighted scores. Both the one-factor and three-factor models of the GOHAI were found to be valid, reliable and invariant for the sample after the exclusion of three items. The use of overall weighted scores is recommended for calculating the score of self-perception of oral health. © 2017 John Wiley & Sons A/S and The

77 FR 4710 - Proposed Establishment of Class E Airspace; Eldon, MO

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-31

... accommodate new Standard Instrument Approach Procedures (SIAP) at Eldon Model Airpark. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at the... on this proposal to the U.S. Department of Transportation, Docket Operations, 1200 New Jersey Avenue...

IT vendor selection model by using structural equation model & analytical hierarchy process

NASA Astrophysics Data System (ADS)

Maitra, Sarit; Dominic, P. D. D.

2012-11-01

Selecting and evaluating the right vendors is imperative for an organization's global marketplace competitiveness. Improper selection and evaluation of potential vendors can dwarf an organization's supply chain performance. Numerous studies have demonstrated that firms consider multiple criteria when selecting key vendors. This research intends to develop a new hybrid model for vendor selection process with better decision making. The new proposed model provides a suitable tool for assisting decision makers and managers to make the right decisions and select the most suitable vendor. This paper proposes a Hybrid model based on Structural Equation Model (SEM) and Analytical Hierarchy Process (AHP) for long-term strategic vendor selection problems. The five steps framework of the model has been designed after the thorough literature study. The proposed hybrid model will be applied using a real life case study to assess its effectiveness. In addition, What-if analysis technique will be used for model validation purpose.

Proposing integrated Shannon's entropy-inverse data envelopment analysis methods for resource allocation problem under a fuzzy environment

NASA Astrophysics Data System (ADS)

Çakır, Süleyman

2017-10-01

In this study, a two-phase methodology for resource allocation problems under a fuzzy environment is proposed. In the first phase, the imprecise Shannon's entropy method and the acceptability index are suggested, for the first time in the literature, to select input and output variables to be used in the data envelopment analysis (DEA) application. In the second step, an interval inverse DEA model is executed for resource allocation in a short run. In an effort to exemplify the practicality of the proposed fuzzy model, a real case application has been conducted involving 16 cement firms listed in Borsa Istanbul. The results of the case application indicated that the proposed hybrid model is a viable procedure to handle input-output selection and resource allocation problems under fuzzy conditions. The presented methodology can also lend itself to different applications such as multi-criteria decision-making problems.

Generalized model of seismic pulse

NASA Astrophysics Data System (ADS)

Rabinovich, E. V.; Filipenko, N. Y.; Shefel, G. S.

2018-05-01

The paper presents data on a pulse model, suitable for generalizing models of known seismic pulses. It is shown that for each of the known models it is possible to obtain a very accurate quadratic approximation using the proposed model. For example, the fragment of a real seismic trace is approximated by a pulses set formed on the basis of the proposed model, with a high accuracy.

Emerging technologies for the changing global market

NASA Technical Reports Server (NTRS)

Cruit, Wendy; Schutzenhofer, Scott; Goldberg, Ben; Everhart, Kurt

1993-01-01

This project served to define an appropriate methodology for effective prioritization of technology efforts required to develop replacement technologies mandated by imposed and forecast legislation. The methodology used is a semi-quantative approach derived from quality function deployment techniques (QFD Matrix). This methodology aims to weight the full environmental, cost, safety, reliability, and programmatic implications of replacement technology development to allow appropriate identification of viable candidates and programmatic alternatives. The results will be implemented as a guideline for consideration for current NASA propulsion systems.

An Extended Damage Plasticity Model for Shotcrete: Formulation and Comparison with Other Shotcrete Models

PubMed Central

Neuner, Matthias; Gamnitzer, Peter; Hofstetter, Günter

2017-01-01

The aims of the present paper are (i) to briefly review single-field and multi-field shotcrete models proposed in the literature; (ii) to propose the extension of a damage-plasticity model for concrete to shotcrete; and (iii) to evaluate the capabilities of the proposed extended damage-plasticity model for shotcrete by comparing the predicted response with experimental data for shotcrete and with the response predicted by shotcrete models, available in the literature. The results of the evaluation will be used for recommendations concerning the application and further improvements of the investigated shotcrete models and they will serve as a basis for the design of a new lab test program, complementing the existing ones. PMID:28772445

Generalized Ordinary Differential Equation Models 1

PubMed Central

Miao, Hongyu; Wu, Hulin; Xue, Hongqi

2014-01-01

Existing estimation methods for ordinary differential equation (ODE) models are not applicable to discrete data. The generalized ODE (GODE) model is therefore proposed and investigated for the first time. We develop the likelihood-based parameter estimation and inference methods for GODE models. We propose robust computing algorithms and rigorously investigate the asymptotic properties of the proposed estimator by considering both measurement errors and numerical errors in solving ODEs. The simulation study and application of our methods to an influenza viral dynamics study suggest that the proposed methods have a superior performance in terms of accuracy over the existing ODE model estimation approach and the extended smoothing-based (ESB) method. PMID:25544787

Systematic Alternatives to Proposal Preparation.

ERIC Educational Resources Information Center

Knirk, Frederick G.; And Others

Educators who have to develop proposals must be concerned with making effective decisions. This paper discusses a number of educational systems management tools which can be used to reduce the time and effort in developing a proposal. In addition, ways are introduced to systematically increase the quality of the proposal through the development of…

A Hybrid 3D Indoor Space Model

NASA Astrophysics Data System (ADS)

Jamali, Ali; Rahman, Alias Abdul; Boguslawski, Pawel

2016-10-01

GIS integrates spatial information and spatial analysis. An important example of such integration is for emergency response which requires route planning inside and outside of a building. Route planning requires detailed information related to indoor and outdoor environment. Indoor navigation network models including Geometric Network Model (GNM), Navigable Space Model, sub-division model and regular-grid model lack indoor data sources and abstraction methods. In this paper, a hybrid indoor space model is proposed. In the proposed method, 3D modeling of indoor navigation network is based on surveying control points and it is less dependent on the 3D geometrical building model. This research proposes a method of indoor space modeling for the buildings which do not have proper 2D/3D geometrical models or they lack semantic or topological information. The proposed hybrid model consists of topological, geometrical and semantical space.

How to write a research proposal?

PubMed Central

Sudheesh, K; Duggappa, Devika Rani; Nethra, SS

2016-01-01

Writing the proposal of a research work in the present era is a challenging task due to the constantly evolving trends in the qualitative research design and the need to incorporate medical advances into the methodology. The proposal is a detailed plan or ‘blueprint’ for the intended study, and once it is completed, the research project should flow smoothly. Even today, many of the proposals at post-graduate evaluation committees and application proposals for funding are substandard. A search was conducted with keywords such as research proposal, writing proposal and qualitative using search engines, namely, PubMed and Google Scholar, and an attempt has been made to provide broad guidelines for writing a scientifically appropriate research proposal. PMID:27729688

Staff Study on Cost and Training Effectiveness of Proposed Training Systems. TAEG Report 1.

ERIC Educational Resources Information Center

Naval Training Equipment Center, Orlando, FL. Training Analysis and Evaluation Group.

A study began the development and initial testing of a method for predicting cost and training effectiveness of proposed training programs. A prototype Training Effectiveness and Cost Effectiveness Prediction (TECEP) model was developed and tested. The model was a method for optimization of training media allocation on the basis of fixed training…

Proposals for enhanced health risk assessment and stratification in an integrated care scenario

PubMed Central

Dueñas-Espín, Ivan; Vela, Emili; Pauws, Steffen; Bescos, Cristina; Cano, Isaac; Cleries, Montserrat; Contel, Joan Carles; de Manuel Keenoy, Esteban; Garcia-Aymerich, Judith; Gomez-Cabrero, David; Kaye, Rachelle; Lahr, Maarten M H; Lluch-Ariet, Magí; Moharra, Montserrat; Monterde, David; Mora, Joana; Nalin, Marco; Pavlickova, Andrea; Piera, Jordi; Ponce, Sara; Santaeugenia, Sebastià; Schonenberg, Helen; Störk, Stefan; Tegner, Jesper; Velickovski, Filip; Westerteicher, Christoph; Roca, Josep

2016-01-01

Objectives Population-based health risk assessment and stratification are considered highly relevant for large-scale implementation of integrated care by facilitating services design and case identification. The principal objective of the study was to analyse five health-risk assessment strategies and health indicators used in the five regions participating in the Advancing Care Coordination and Telehealth Deployment (ACT) programme (http://www.act-programme.eu). The second purpose was to elaborate on strategies toward enhanced health risk predictive modelling in the clinical scenario. Settings The five ACT regions: Scotland (UK), Basque Country (ES), Catalonia (ES), Lombardy (I) and Groningen (NL). Participants Responsible teams for regional data management in the five ACT regions. Primary and secondary outcome measures We characterised and compared risk assessment strategies among ACT regions by analysing operational health risk predictive modelling tools for population-based stratification, as well as available health indicators at regional level. The analysis of the risk assessment tool deployed in Catalonia in 2015 (GMAs, Adjusted Morbidity Groups) was used as a basis to propose how population-based analytics could contribute to clinical risk prediction. Results There was consensus on the need for a population health approach to generate health risk predictive modelling. However, this strategy was fully in place only in two ACT regions: Basque Country and Catalonia. We found marked differences among regions in health risk predictive modelling tools and health indicators, and identified key factors constraining their comparability. The research proposes means to overcome current limitations and the use of population-based health risk prediction for enhanced clinical risk assessment. Conclusions The results indicate the need for further efforts to improve both comparability and flexibility of current population-based health risk predictive modelling approaches

7 CFR 3405.14 - Proposal review.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 15 2011-01-01 2011-01-01 false Proposal review. 3405.14 Section 3405.14 Agriculture Regulations of the Department of Agriculture (Continued) NATIONAL INSTITUTE OF FOOD AND AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS PROGRAM Proposal Review and Evaluation § 3405.14 Proposal review. The proposal...

7 CFR 3405.14 - Proposal review.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 15 2012-01-01 2012-01-01 false Proposal review. 3405.14 Section 3405.14 Agriculture Regulations of the Department of Agriculture (Continued) NATIONAL INSTITUTE OF FOOD AND AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS PROGRAM Proposal Review and Evaluation § 3405.14 Proposal review. The proposal...

7 CFR 3405.14 - Proposal review.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 15 2013-01-01 2013-01-01 false Proposal review. 3405.14 Section 3405.14 Agriculture Regulations of the Department of Agriculture (Continued) NATIONAL INSTITUTE OF FOOD AND AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS PROGRAM Proposal Review and Evaluation § 3405.14 Proposal review. The proposal...

7 CFR 3405.14 - Proposal review.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 15 2014-01-01 2014-01-01 false Proposal review. 3405.14 Section 3405.14 Agriculture Regulations of the Department of Agriculture (Continued) NATIONAL INSTITUTE OF FOOD AND AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS PROGRAM Proposal Review and Evaluation § 3405.14 Proposal review. The proposal...

A first proposal for a general description model of forensic traces

NASA Astrophysics Data System (ADS)

Lindauer, Ina; Schäler, Martin; Vielhauer, Claus; Saake, Gunter; Hildebrandt, Mario

2012-06-01

In recent years, the amount of digitally captured traces at crime scenes increased rapidly. There are various kinds of such traces, like pick marks on locks, latent fingerprints on various surfaces as well as different micro traces. Those traces are different from each other not only in kind but also in which information they provide. Every kind of trace has its own properties (e.g., minutiae for fingerprints, or raking traces for locks) but there are also large amounts of metadata which all traces have in common like location, time and other additional information in relation to crime scenes. For selected types of crime scene traces, type-specific databases already exist, such as the ViCLAS for sexual offences, the IBIS for ballistic forensics or the AFIS for fingerprints. These existing forensic databases strongly differ in the trace description models. For forensic experts it would be beneficial to work with only one database capable of handling all possible forensic traces acquired at a crime scene. This is especially the case when different kinds of traces are interrelated (e.g., fingerprints and ballistic marks on a bullet casing). Unfortunately, current research on interrelated traces as well as general forensic data models and structures is not mature enough to build such an encompassing forensic database. Nevertheless, recent advances in the field of contact-less scanning make it possible to acquire different kinds of traces with the same device. Therefore the data of these traces is structured similarly what simplifies the design of a general forensic data model for different kinds of traces. In this paper we introduce a first common description model for different forensic trace types. Furthermore, we apply for selected trace types from the well established database schema development process the phases of transferring expert knowledge in the corresponding forensic fields into an extendible, database-driven, generalised forensic description model. The

75 FR 59261 - Agency Information Collection Activities; Proposed Collection; Comment Request; Asbestos...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

... affected by this ICR are local education agencies (LEAs, e.g., elementary or secondary public school... Activities; Proposed Collection; Comment Request; Asbestos-Containing Materials in Schools Rule and Revised... (OMB). This ICR, entitled: ``Asbestos-Containing Materials in Schools Rule and Revised Asbestos Model...

The next GUM and its proposals: a comparison study

NASA Astrophysics Data System (ADS)

Damasceno, J. C.; Couto, P. R. G.

2018-03-01

The Guide to the Expression of Uncertainty in Measurement (GUM) is currently under revision. New proposals for its implementation were circulated in the form of a draft document. Two of the main changes are explored in this work using a Brinell hardness model example. Changes in the evaluation of uncertainty for repeated indications and in the construction of coverage intervals are compared with the classic GUM and with Monte Carlo simulation method.

SPRITE: the Spitzer proposal review website

NASA Astrophysics Data System (ADS)

Crane, Megan K.; Storrie-Lombardi, Lisa J.; Silbermann, Nancy A.; Rebull, Luisa M.

2008-07-01

The Spitzer Science Center (SSC), located on the campus of the California Institute of Technology, supports the science operations of NASA's infrared Spitzer Space Telescope. The SSC issues an annual Call for Proposals inviting investigators worldwide to submit Spitzer Space Telescope proposals. The Spitzer Proposal Review Website (SPRITE) is a MySQL/PHP web database application designed to support the SSC proposal review process. Review panel members use the software to view, grade, and write comments about the proposals, and SSC support team members monitor the grading and ranking process and ultimately generate a ranked list of all the proposals. The software is also used to generate, edit, and email award letters to the proposers. This work was performed at the California Institute of Technology under contract to the National Aeronautics and Space Administration.

Place-Based Investment Model of Talent Development: A Proposed Model for Developing and Reinvesting Talents within the Community

ERIC Educational Resources Information Center

Paul, Kristina Ayers; Seward, Kristen K.

2016-01-01

The place-based investment model (PBIM) of talent development is a programming model for developing talents of high-potential youth in ways that could serve as an investment in the community. In this article, we discuss the PBIM within rural contexts. The model is grounded in three theories--Moon's personal talent development theory, Sternberg's…

The impact of preventive maintenance practices on manufacturing performance: A proposed model for SMEs in Malaysia

NASA Astrophysics Data System (ADS)

Lazim, Halim Mad; Taib, Che Azlan; Lamsali, Hendrik; Saleh, Mohamed Najib; Subramaniam, Chandrakantan

2016-08-01

Preventive maintenance (PM) plays important role to avoid or mitigate potential stoppages and disruptions of equipment or machinery from occurring in daily operations. PM emphasized total employee involvement and it is important for companies as well as Small and Medium Sized Enterprises (SMEs). SME sectors contribution to the Malaysian economy makes up 95% of the total manufacturers, however PM remain relatively lacking. The ability, reliability and effective maintenance management is highly important in order to achieve desired manufacturing performance. Therefore, organizational capability in planning, controlling, implementing and monitoring PM activities is important. Furthermore, empirical evidence on the potential impact of PM practices towards manufacturing performance with organizational capability as a moderating effect is still limited and indecisive. Henceforth, this paper aims to explore and investigate potential relationships between PM practices and manufacturing performance moderated by organizational capability in the contact of Malaysian SMEs in the manufacturing sector. Correspondently, the study intends to propose a new research framework and hypotheses to examine the abovementioned relationships. The proposed framework includes PM team, PM strategy and planned maintenance as the determinants, while organizational capability serves as the moderating variable. Manufacturing performance will be viewed in terms of innovation and financial factors. Proposed research direction and conclusion are discussed at the end of the study.

7 CFR 3403.10 - Proposal review.

Code of Federal Regulations, 2011 CFR

2011-01-01

... BUSINESS INNOVATION RESEARCH GRANTS PROGRAM Submission and Evaluation of Proposals § 3403.10 Proposal.... USDA is under no obligation to fund any proposal or any specific number of proposals in a given topic... are uniquely qualified by training and experience in their respective fields to render expert advice...

Proposal Improvements That Work

NASA Technical Reports Server (NTRS)

Dunn, F.

1998-01-01

Rocketdyne Propulsion and Power, an operating location of Boeing in Canoga Park, California is under contract with NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama for design, development, production, and mission support of Space Shuttle Main Engines (SSMEs). The contract was restructured in 1996 to emphasize a mission contracting environment under which Rocketdyne supports the Space Transportation System launch manifest of seven flights a year without the need for a detailed list of contract deliverables such as nozzles, turbopumps, and combustion devices. This contract structure is in line with the overall Space Shuttle program goals established by the NASA to fly safely, meet the flight manifest, and reduce cost. Rocketdyne's Contracts, Pricing, and Estimating team has worked for the past several years with representatives from MSFC, the local Defense Contract Management Command, and the DCAA to improve the quality of cost proposals to MSFC for contract changes on the SSME. The contract changes on the program result primarily from engineering change proposals for product enhancements to improve safety, maintainability, or operability in the space environment. This continuous improvement team effort has been successful in improving proposal quality, reducing cycle time, and reducing cost. Some of the principal lessons learned are highlighted here to show how proposal improvements can be implemented to enhance customer satisfaction and ensure cost proposals can be evaluated easily by external customers.

Word-level language modeling for P300 spellers based on discriminative graphical models

NASA Astrophysics Data System (ADS)

Delgado Saa, Jaime F.; de Pesters, Adriana; McFarland, Dennis; Çetin, Müjdat

2015-04-01

Objective. In this work we propose a probabilistic graphical model framework that uses language priors at the level of words as a mechanism to increase the performance of P300-based spellers. Approach. This paper is concerned with brain-computer interfaces based on P300 spellers. Motivated by P300 spelling scenarios involving communication based on a limited vocabulary, we propose a probabilistic graphical model framework and an associated classification algorithm that uses learned statistical models of language at the level of words. Exploiting such high-level contextual information helps reduce the error rate of the speller. Main results. Our experimental results demonstrate that the proposed approach offers several advantages over existing methods. Most importantly, it increases the classification accuracy while reducing the number of times the letters need to be flashed, increasing the communication rate of the system. Significance. The proposed approach models all the variables in the P300 speller in a unified framework and has the capability to correct errors in previous letters in a word, given the data for the current one. The structure of the model we propose allows the use of efficient inference algorithms, which in turn makes it possible to use this approach in real-time applications.

Point of a space experiment proposal.

PubMed

Fukui, Keiji; Shimazu, Toru; Higashibata, Akira; Fujimoto, Nobuyoshi; Ishioka, Noriaki

2003-10-01

JAXA will solicit research proposals for space flight experiments that would be conducted for less than three years after the selection. In principle, available samples will be limited to Arabidopsis and C. elegans and flight hardware and protocol of space flight experiment will be pre-fixed. Proposals using different combinations of species and flight hardware will not be acceptable. Besides scientific issues, it is very important for proposer to write an impressive proposal. Hypothesis basis research proposal is the accepted standard. Reviewers will dislike a descriptive and unfocused research proposal without hypothesis. Ground preparation experiments, which are not related directly to space experiments, should not be included in the solicitation.

36 CFR 219.6 - Proposed actions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Proposed actions. 219.6... actions. (a) Proposal. The responsible official may propose to amend or revise a plan, propose a site-specific action, or both. (b) NEPA requirements. Unless otherwise provided by law, the responsible official...

Translation from UML to Markov Model: A Performance Modeling Framework

NASA Astrophysics Data System (ADS)

Khan, Razib Hayat; Heegaard, Poul E.

Performance engineering focuses on the quantitative investigation of the behavior of a system during the early phase of the system development life cycle. Bearing this on mind, we delineate a performance modeling framework of the application for communication system that proposes a translation process from high level UML notation to Continuous Time Markov Chain model (CTMC) and solves the model for relevant performance metrics. The framework utilizes UML collaborations, activity diagrams and deployment diagrams to be used for generating performance model for a communication system. The system dynamics will be captured by UML collaboration and activity diagram as reusable specification building blocks, while deployment diagram highlights the components of the system. The collaboration and activity show how reusable building blocks in the form of collaboration can compose together the service components through input and output pin by highlighting the behavior of the components and later a mapping between collaboration and system component identified by deployment diagram will be delineated. Moreover the UML models are annotated to associate performance related quality of service (QoS) information which is necessary for solving the performance model for relevant performance metrics through our proposed framework. The applicability of our proposed performance modeling framework in performance evaluation is delineated in the context of modeling a communication system.

78 FR 3921 - Proposed Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-17

... Specifications Combustion Engineering Plants.'' Specifically, the proposed change revises various TSs to add a... Technical Details TSTF-426, Revision 5, is applicable to all Combustion Engineering- designed nuclear power...

The macrostructure of informal arguments: a proposed model and analysis.

PubMed

Ricco, Robert B

2003-08-01

Theories of informal reasoning and critical thinking often maintain that everyday, informal arguments can be classified into types based on the specific organization that the premises or reasons enter into in their support for the conclusion (Snoeck Henkemans, 2000; Vorobej, 1995b). Three general types are identified: convergent, coordinately linked, and subordinately linked arguments. There has been no empirical research, however, to determine whether these structural distinctions have any psychological reality. In the first two of four experiments, college students were presented with premise pairs from larger, informal arguments and were asked to judge the nature of the relationship between the premises in a pair. The judgments involved applying "tests" of linkage, subordination, and so on, that have been proposed in the theoretical literature on argument analysis (e.g., Walton, 1996a; Yanal, 1991). Results suggest that adults can effectively distinguish between linked (interdependent) and convergent relationships and can further distinguish between interdependencies that are full and those that are merely partial. Adults also distinguished between subordinate and nonsubordinate relations. Experiments 3 and 4 provide evidence that adults make use of information about argument structure in evaluating argument strength and in categorizing arguments. Experiment 4 further suggests that facility with macrostructure is only modestly related to deductive reasoning competence. Findings are framed in terms of a speculative account of how argument structure is identified and mentally represented.

A proposed simulation method for directed self-assembly of nanographene

NASA Astrophysics Data System (ADS)

Geraets, J. A.; Baldwin, J. P. C.; Twarock, R.; Hancock, Y.

2017-09-01

A methodology for predictive kinetic self-assembly modeling of bottom-up chemical synthesis of nanographene is proposed. The method maintains physical transparency in using a novel array format to efficiently store molecule information and by using array operations to determine reaction possibilities. Within a minimal model approach, the parameter space for the bond activation energies (i.e. molecule functionalization) at fixed reaction temperature and initial molecule concentrations is explored. Directed self-assembly of nanographene from functionalized tetrabenzanthracene and benzene is studied with regions in the activation energy phase-space showing length-to-width ratio tunability. The degree of defects and reaction reproducibility in the simulations is also determined, with the rate of functionalized benzene addition providing additional control of the dimension and quality of the nanographene. Comparison of the reaction energetics to available density functional theory data suggests the synthesis may be experimentally tenable using aryl-halide cross-coupling and noble metal surface-assisted catalysis. With full access to the intermediate reaction network and with dynamic coupling to density functional theory-informed tight-binding simulation, the method is proposed as a computationally efficient means towards detailed simulation-driven design of new nanographene systems.

Modelling and model predictive control for a bicycle-rider system

NASA Astrophysics Data System (ADS)

Chu, T. D.; Chen, C. K.

2018-01-01

This study proposes a bicycle-rider control model based on model predictive control (MPC). First, a bicycle-rider model with leaning motion of the rider's upper body is developed. The initial simulation data of the bicycle rider are then used to identify the linear model of the system in state-space form for MPC design. Control characteristics of the proposed controller are assessed by simulating the roll-angle tracking control. In this riding task, the MPC uses steering and leaning torques as the control inputs to control the bicycle along a reference roll angle. The simulation results in different cases have demonstrated the applicability and performance of the MPC for bicycle-rider modelling.

Small intestinal model for electrically propelled capsule endoscopy

PubMed Central

2011-01-01

The aim of this research is to propose a small intestine model for electrically propelled capsule endoscopy. The electrical stimulus can cause contraction of the small intestine and propel the capsule along the lumen. The proposed model considered the drag and friction from the small intestine using a thin walled model and Stokes' drag equation. Further, contraction force from the small intestine was modeled by using regression analysis. From the proposed model, the acceleration and velocity of various exterior shapes of capsule were calculated, and two exterior shapes of capsules were proposed based on the internal volume of the capsules. The proposed capsules were fabricated and animal experiments were conducted. One of the proposed capsules showed an average (SD) velocity in forward direction of 2.91 ± 0.99 mm/s and 2.23 ± 0.78 mm/s in the backward direction, which was 5.2 times faster than that obtained in previous research. The proposed model can predict locomotion of the capsule based on various exterior shapes of the capsule. PMID:22177218

Use of Machine Learning Algorithms to Propose a New Methodology to Conduct, Critique and Validate Urban Scale Building Energy Modeling

NASA Astrophysics Data System (ADS)

Pathak, Maharshi

City administrators and real-estate developers have been setting up rather aggressive energy efficiency targets. This, in turn, has led the building science research groups across the globe to focus on urban scale building performance studies and level of abstraction associated with the simulations of the same. The increasing maturity of the stakeholders towards energy efficiency and creating comfortable working environment has led researchers to develop methodologies and tools for addressing the policy driven interventions whether it's urban level energy systems, buildings' operational optimization or retrofit guidelines. Typically, these large-scale simulations are carried out by grouping buildings based on their design similarities i.e. standardization of the buildings. Such an approach does not necessarily lead to potential working inputs which can make decision-making effective. To address this, a novel approach is proposed in the present study. The principle objective of this study is to propose, to define and evaluate the methodology to utilize machine learning algorithms in defining representative building archetypes for the Stock-level Building Energy Modeling (SBEM) which are based on operational parameter database. The study uses "Phoenix- climate" based CBECS-2012 survey microdata for analysis and validation. Using the database, parameter correlations are studied to understand the relation between input parameters and the energy performance. Contrary to precedence, the study establishes that the energy performance is better explained by the non-linear models. The non-linear behavior is explained by advanced learning algorithms. Based on these algorithms, the buildings at study are grouped into meaningful clusters. The cluster "mediod" (statistically the centroid, meaning building that can be represented as the centroid of the cluster) are established statistically to identify the level of abstraction that is acceptable for the whole building energy

Proposed reference models for CO2 and halogenated hydrocarbons

NASA Technical Reports Server (NTRS)

Fabian, P.

1989-01-01

The vertical distribution of carbon dioxide, halocarbons and their sink products, HCl and HF, have become available, mainly by means of balloon measurements. Most measurements were made at northern mid-latutudes, but some constituents were measured at tropical latitudes and in the Southern Hemisphere as well. An attempt is made here to combine the available data for presentation of reference models for CO2, CCl4 CCl3F, CCl2F2, CClF3, CF4, CCl2F-CClF2, CClF2-CClF2, CClF2-CF3, CF3-CF3, CH3Cl, CHClF2, CH3-CCl3, CBrClF2, CBrF3, HCl and HF.

Towards a Model of Technology Adoption: A Conceptual Model Proposition

NASA Astrophysics Data System (ADS)

Costello, Pat; Moreton, Rob

A conceptual model for Information Communication Technology (ICT) adoption by Small Medium Enterprises (SMEs) is proposed. The research uses several ICT adoption models as its basis with theoretical underpinning provided by the Diffusion of Innovation theory and the Technology Acceptance Model (TAM). Taking an exploratory research approach the model was investigated amongst 200 SMEs whose core business is ICT. Evidence from this study demonstrates that these SMEs face the same issues as all other industry sectors. This work points out weaknesses in SMEs environments regarding ICT adoption and suggests what they may need to do to increase the success rate of any proposed adoption. The methodology for development of the framework is described and recommendations made for improved Government-led ICT adoption initiatives. Application of the general methodology has resulted in new opportunities to embed the ethos and culture surrounding the issues into the framework of new projects developed as a result of Government intervention. A conceptual model is proposed that may lead to a deeper understanding of the issues under consideration.

Periodontics II: Course Proposal.

ERIC Educational Resources Information Center

Dordick, Bruce

A proposal is presented for Periodontics II, a course offered at the Community College of Philadelphia to give the dental hygiene/assisting student an understanding of the disease states of the periodontium and their treatment. A standardized course proposal cover form is given, followed by a statement of purpose for the course, a list of major…

The timbre model

NASA Astrophysics Data System (ADS)

Jensen, Kristoffer

2002-11-01

A timbre model is proposed for use in multiple applications. This model, which encompasses all voiced isolated musical instruments, has an intuitive parameter set, fixed size, and separates the sounds in dimensions akin to the timbre dimensions as proposed in timbre research. The analysis of the model parameters is fully documented, and it proposes, in particular, a method for the estimation of the difficult decay/release split-point. The main parameters of the model are the spectral envelope, the attack/release durations and relative amplitudes, and the inharmonicity and the shimmer and jitter (which provide both for the slow random variations of the frequencies and amplitudes, and also for additive noises). Some of the applications include synthesis, where a real-time application is being developed with an intuitive gui, classification, and search of sounds based on the content of the sounds, and a further understanding of acoustic musical instrument behavior. In order to present the background of the model, this presentation will start with sinusoidal A/S, some timbre perception research, then present the timbre model, show the validity for individual music instrument sounds, and finally introduce some expression additions to the model.

Modelling the transport of oil after a proposed oil spill accident in Barents Sea and its environmental impact on Alke species

NASA Astrophysics Data System (ADS)

Lu, J.; Yuan, F.; Mikkelsen, J. D.; Ohm, C.; Stange, E.; Holand, M.

2017-08-01

Accidental oil spills can have significant effect on the coastal and marine environment. As the oil extraction and exploration activities increase in the Barents Sea, it is of increasingly importance to investigate the potential oil spill incidents associated with these activities. In this study, the transport and fate of oil after a proposed oil spill incident in Barents Sea was modelled by oil spill contingency and response model OSCAR. The possibility that the spilled oil reach the open sea and the strand area was calculated respectively. The influence area of the incident was calculated by combining the results from 200 simulations. The possibility that the spilled oil reach Alke species, a vulnerable species and on the National Red List of birds in Barents Sea, was analyzed by combining oil spill modelling results and the Alke species distribution data. The results showed that oil is dominated with a probability of 70-100% in the open sea to reach an area in a radius of 20km from the release location after 14 days of release. The probability reduces with the increasing distances from the release location. It is higher possibility that the spilled oil will reach the Alke species in the strand area than in the open sea in the summer. The total influence area of the release is 11 429 km2 for the surface water and 1528 km2 for the coastal area.

A re-examination of neural basis of language processing: proposal of a dynamic hodotopical model from data provided by brain stimulation mapping during picture naming.

PubMed

Duffau, Hugues; Moritz-Gasser, Sylvie; Mandonnet, Emmanuel

2014-04-01

From recent findings provided by brain stimulation mapping during picture naming, we re-examine the neural basis of language. We studied structural-functional relationships by correlating the types of language disturbances generated by stimulation in awake patients, mimicking a transient virtual lesion both at cortical and subcortical levels (white matter and deep grey nuclei), with the anatomical location of the stimulation probe. We propose a hodotopical (delocalized) and dynamic model of language processing, which challenges the traditional modular and serial view. According to this model, following the visual input, the language network is organized in parallel, segregated (even if interconnected) large-scale cortico-subcortical sub-networks underlying semantic, phonological and syntactic processing. Our model offers several advantages (i) it explains double dissociations during stimulation (comprehension versus naming disorders, semantic versus phonemic paraphasias, syntactic versus naming disturbances, plurimodal judgment versus naming disorders); (ii) it takes into account the cortical and subcortical anatomic constraints; (iii) it explains the possible recovery of aphasia following a lesion within the "classical" language areas; (iv) it establishes links with a model executive functions. Copyright © 2013 Elsevier Inc. All rights reserved.

Following Human Footsteps: Proposal of a Decision Theory Based on Human Behavior

NASA Technical Reports Server (NTRS)

Mahmud, Faisal

2011-01-01

Human behavior is a complex nature which depends on circumstances and decisions varying from time to time as well as place to place. The way a decision is made either directly or indirectly related to the availability of the options. These options though appear at random nature, have a solid directional way for decision making. In this paper, a decision theory is proposed which is based on human behavior. The theory is structured with model sets that will show the all possible combinations for making a decision, A virtual and simulated environment is considered to show the results of the proposed decision theory

Soft sensor modelling by time difference, recursive partial least squares and adaptive model updating

NASA Astrophysics Data System (ADS)

Fu, Y.; Yang, W.; Xu, O.; Zhou, L.; Wang, J.

2017-04-01

To investigate time-variant and nonlinear characteristics in industrial processes, a soft sensor modelling method based on time difference, moving-window recursive partial least square (PLS) and adaptive model updating is proposed. In this method, time difference values of input and output variables are used as training samples to construct the model, which can reduce the effects of the nonlinear characteristic on modelling accuracy and retain the advantages of recursive PLS algorithm. To solve the high updating frequency of the model, a confidence value is introduced, which can be updated adaptively according to the results of the model performance assessment. Once the confidence value is updated, the model can be updated. The proposed method has been used to predict the 4-carboxy-benz-aldehyde (CBA) content in the purified terephthalic acid (PTA) oxidation reaction process. The results show that the proposed soft sensor modelling method can reduce computation effectively, improve prediction accuracy by making use of process information and reflect the process characteristics accurately.

75 FR 34953 - Existence of Proposed Airworthiness Design Standards for Acceptance Under the Primary Category...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... the proposed airworthiness design standards for acceptance of the OHA, Inc., Models Cessna 172I, 172K... Airworthiness Design Standards for Acceptance Under the Primary Category Rule; Orlando Helicopter Airways (OHA), Inc., Models Cessna 172I, 172K, 172L, and 172M AGENCY: Federal Aviation Administration (FAA), DOT...

Iowa Hydrologic and Environmental Validation Site: A Proposal to the Community

NASA Astrophysics Data System (ADS)

Bradley, A. A.; Ciach, G. J.; Eichinger, W. N.; Hornbuckle, K. C.; Illman, W.; Krajewski, W. F.; Kruger, A.; Patel, V. C.; Weirich, F. H.; Zhang, Y.

2002-05-01

We present a proposal to the hydrologic research community to establish a validation site in eastern Iowa. Many hydrological and meteorological variables observed using remote sensing techniques or predicted using numerical simulation models require validation. Validation, understood as quantification of the uncertainty, is difficult and often even impossible using operationally available in-situ observations. Specialized high-density networks of sensors with well-established error characteristics are required to serve as reference. We propose to establish a well-instrumented site for validation of several hydrometeorlogical and environmental variables near Iowa City, Iowa. We foresee this site as a national resource of detailed information collected in partnership with federal, state, and local agencies but independent of their routine mission oriented operations. The data would be distributed in real-time via the Internet to the research community nation wide to support model validation and development studies. In the presentation we justify the need for such sites, we make the case for setting a prototype site in Iowa, and we present preliminary considerations for the site's design and the data distribution system.

Faster R-CNN: Towards Real-Time Object Detection with Region Proposal Networks.

PubMed

Ren, Shaoqing; He, Kaiming; Girshick, Ross; Sun, Jian

2017-06-01

State-of-the-art object detection networks depend on region proposal algorithms to hypothesize object locations. Advances like SPPnet [1] and Fast R-CNN [2] have reduced the running time of these detection networks, exposing region proposal computation as a bottleneck. In this work, we introduce a Region Proposal Network (RPN) that shares full-image convolutional features with the detection network, thus enabling nearly cost-free region proposals. An RPN is a fully convolutional network that simultaneously predicts object bounds and objectness scores at each position. The RPN is trained end-to-end to generate high-quality region proposals, which are used by Fast R-CNN for detection. We further merge RPN and Fast R-CNN into a single network by sharing their convolutional features-using the recently popular terminology of neural networks with 'attention' mechanisms, the RPN component tells the unified network where to look. For the very deep VGG-16 model [3] , our detection system has a frame rate of 5 fps (including all steps) on a GPU, while achieving state-of-the-art object detection accuracy on PASCAL VOC 2007, 2012, and MS COCO datasets with only 300 proposals per image. In ILSVRC and COCO 2015 competitions, Faster R-CNN and RPN are the foundations of the 1st-place winning entries in several tracks. Code has been made publicly available.

A Study on Design-Oriented Demands of VR via ZMET-QFD Model for Industrial Design Education and Students' Learning

ERIC Educational Resources Information Center

Liang, Yo-Wen; Lee, An-Sheng; Liu, Shuo-Fang

2016-01-01

The difficulty of Virtual Reality application in industrial design education and learning is VR engineers cannot comprehend what the important functions or elements are for students. In addition, a general-purpose VR usually confuses the students and provides neither good manipulation means nor useful toolkits. To solve these problems, the…

Model Description and Proposed Application for the Enlisted Personnel Inventory, Cost, and Compensation Model

DTIC Science & Technology

1994-07-01

provide additional information for the user / policy analyst: Eichers, D., Sola, M., McLernan, G., EPICC User’s Manual , Systems Research and Applications...maintenance, and a set of on-line help screens. Each are further discussed below and a full discussion is included in the EPICC User’s Manual . Menu Based...written documentation (user’s manual ) that will be provided with the model. 55 The next chapter discusses the validation of the inventory projection and

Modeling the behavioral substrates of associate learning and memory - Adaptive neural models

NASA Technical Reports Server (NTRS)

Lee, Chuen-Chien

1991-01-01

Three adaptive single-neuron models based on neural analogies of behavior modification episodes are proposed, which attempt to bridge the gap between psychology and neurophysiology. The proposed models capture the predictive nature of Pavlovian conditioning, which is essential to the theory of adaptive/learning systems. The models learn to anticipate the occurrence of a conditioned response before the presence of a reinforcing stimulus when training is complete. Furthermore, each model can find the most nonredundant and earliest predictor of reinforcement. The behavior of the models accounts for several aspects of basic animal learning phenomena in Pavlovian conditioning beyond previous related models. Computer simulations show how well the models fit empirical data from various animal learning paradigms.

Model Comparison of Bayesian Semiparametric and Parametric Structural Equation Models

ERIC Educational Resources Information Center

Song, Xin-Yuan; Xia, Ye-Mao; Pan, Jun-Hao; Lee, Sik-Yum

2011-01-01

Structural equation models have wide applications. One of the most important issues in analyzing structural equation models is model comparison. This article proposes a Bayesian model comparison statistic, namely the "L[subscript nu]"-measure for both semiparametric and parametric structural equation models. For illustration purposes, we consider…

A Generalized Quantum-Inspired Decision Making Model for Intelligent Agent

PubMed Central

Loo, Chu Kiong

2014-01-01

A novel decision making for intelligent agent using quantum-inspired approach is proposed. A formal, generalized solution to the problem is given. Mathematically, the proposed model is capable of modeling higher dimensional decision problems than previous researches. Four experiments are conducted, and both empirical experiments results and proposed model's experiment results are given for each experiment. Experiments showed that the results of proposed model agree with empirical results perfectly. The proposed model provides a new direction for researcher to resolve cognitive basis in designing intelligent agent. PMID:24778580

On the Emergent Constraints of Climate Sensitivity [On proposed emergent constraints of climate sensitivity

DOE PAGES

Qu, Xin; Hall, Alex; DeAngelis, Anthony M.; ...

2018-01-11

Differences among climate models in equilibrium climate sensitivity (ECS; the equilibrium surface temperature response to a doubling of atmospheric CO2) remain a significant barrier to the accurate assessment of societally important impacts of climate change. Relationships between ECS and observable metrics of the current climate in model ensembles, so-called emergent constraints, have been used to constrain ECS. Here a statistical method (including a backward selection process) is employed to achieve a better statistical understanding of the connections between four recently proposed emergent constraint metrics and individual feedbacks influencing ECS. The relationship between each metric and ECS is largely attributable tomore » a statistical connection with shortwave low cloud feedback, the leading cause of intermodel ECS spread. This result bolsters confidence in some of the metrics, which had assumed such a connection in the first place. Additional analysis is conducted with a few thousand artificial metrics that are randomly generated but are well correlated with ECS. The relationships between the contrived metrics and ECS can also be linked statistically to shortwave cloud feedback. Thus, any proposed or forthcoming ECS constraint based on the current generation of climate models should be viewed as a potential constraint on shortwave cloud feedback, and physical links with that feedback should be investigated to verify that the constraint is real. Additionally, any proposed ECS constraint should not be taken at face value since other factors influencing ECS besides shortwave cloud feedback could be systematically biased in the models.« less

On the Emergent Constraints of Climate Sensitivity [On proposed emergent constraints of climate sensitivity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qu, Xin; Hall, Alex; DeAngelis, Anthony M.

Differences among climate models in equilibrium climate sensitivity (ECS; the equilibrium surface temperature response to a doubling of atmospheric CO2) remain a significant barrier to the accurate assessment of societally important impacts of climate change. Relationships between ECS and observable metrics of the current climate in model ensembles, so-called emergent constraints, have been used to constrain ECS. Here a statistical method (including a backward selection process) is employed to achieve a better statistical understanding of the connections between four recently proposed emergent constraint metrics and individual feedbacks influencing ECS. The relationship between each metric and ECS is largely attributable tomore » a statistical connection with shortwave low cloud feedback, the leading cause of intermodel ECS spread. This result bolsters confidence in some of the metrics, which had assumed such a connection in the first place. Additional analysis is conducted with a few thousand artificial metrics that are randomly generated but are well correlated with ECS. The relationships between the contrived metrics and ECS can also be linked statistically to shortwave cloud feedback. Thus, any proposed or forthcoming ECS constraint based on the current generation of climate models should be viewed as a potential constraint on shortwave cloud feedback, and physical links with that feedback should be investigated to verify that the constraint is real. Additionally, any proposed ECS constraint should not be taken at face value since other factors influencing ECS besides shortwave cloud feedback could be systematically biased in the models.« less

A Proposed Approach for Joint Modeling of the Longitudinal and Time-To-Event Data in Heterogeneous Populations: An Application to HIV/AIDS's Disease.

PubMed

Roustaei, Narges; Ayatollahi, Seyyed Mohammad Taghi; Zare, Najaf

2018-01-01

In recent years, the joint models have been widely used for modeling the longitudinal and time-to-event data simultaneously. In this study, we proposed an approach (PA) to study the longitudinal and survival outcomes simultaneously in heterogeneous populations. PA relaxes the assumption of conditional independence (CI). We also compared PA with joint latent class model (JLCM) and separate approach (SA) for various sample sizes (150, 300, and 600) and different association parameters (0, 0.2, and 0.5). The average bias of parameters estimation (AB-PE), average SE of parameters estimation (ASE-PE), and coverage probability of the 95% confidence interval (CP) among the three approaches were compared. In most cases, when the sample sizes increased, AB-PE and ASE-PE decreased for the three approaches, and CP got closer to the nominal level of 0.95. When there was a considerable association, PA in comparison with SA and JLCM performed better in the sense that PA had the smallest AB-PE and ASE-PE for the longitudinal submodel among the three approaches for the small and moderate sample sizes. Moreover, JLCM was desirable for the none-association and the large sample size. Finally, the evaluated approaches were applied on a real HIV/AIDS dataset for validation, and the results were compared.

EFFICIENT MODEL-FITTING AND MODEL-COMPARISON FOR HIGH-DIMENSIONAL BAYESIAN GEOSTATISTICAL MODELS. (R826887)

EPA Science Inventory

Geostatistical models are appropriate for spatially distributed data measured at irregularly spaced locations. We propose an efficient Markov chain Monte Carlo (MCMC) algorithm for fitting Bayesian geostatistical models with substantial numbers of unknown parameters to sizable...

Overview of Proposal on High Resolution Climate Model Simulations of Recent Hurricane and Typhoon Activity: The Impact of SSTs and the Madden Julian Oscillation

NASA Technical Reports Server (NTRS)

Schubert, Siegfried; Kang, In-Sik; Reale, Oreste

2009-01-01

This talk gives an update on the progress and further plans for a coordinated project to carry out and analyze high-resolution simulations of tropical storm activity with a number of state-of-the-art global climate models. Issues addressed include, the mechanisms by which SSTs control tropical storm. activity on inter-annual and longer time scales, the modulation of that activity by the Madden Julian Oscillation on sub-seasonal time scales, as well as the sensitivity of the results to model formulation. The project also encourages companion coarser resolution runs to help assess resolution dependence, and. the ability of the models to capture the large-scale and long-terra changes in the parameters important for hurricane development. Addressing the above science questions is critical to understanding the nature of the variability of the Asian-Australian monsoon and its regional impacts, and thus CLIVAR RAMP fully endorses the proposed tropical storm simulation activity. The project is open to all interested organizations and investigators, and the results from the runs will be shared among the participants, as well as made available to the broader scientific community for analysis.

Development of Vehicle Model Test for Road Loading Analysis of Sedan Model

NASA Astrophysics Data System (ADS)

Mohd Nor, M. K.; Noordin, A.; Ruzali, M. F. S.; Hussen, M. H.

2016-11-01

Simple Structural Surfaces (SSS) method is offered as a means of organizing the process for rationalizing the basic vehicle body structure load paths. The application of this simplified approach is highly beneficial in the design development of modern passenger car structure especially during the conceptual stage. In Malaysia, however, there is no real physical model of SSS available to gain considerable insight and understanding into the function of each major subassembly in the whole vehicle structures. Based on this motivation, a physical model of SSS for sedan model with the corresponding model vehicle tests of bending and torsion is proposed in this work. The proposed approach is relatively easy to understand as compared to Finite Element Method (FEM). The results show that the proposed vehicle model test is capable to show that satisfactory load paths can give a sufficient structural stiffness within the vehicle structure. It is clearly observed that the global bending stiffness reduce significantly when more panels are removed from a complete SSS model. It is identified that parcel shelf is an important subassembly to sustain bending load. The results also match with the theoretical hypothesis, as the stiffness of the structure in an open section condition is shown weak when subjected to torsion load compared to bending load. The proposed approach can potentially be integrated with FEM to speed up the design process of automotive vehicle.

Visual Attention Modeling for Stereoscopic Video: A Benchmark and Computational Model.

PubMed

Fang, Yuming; Zhang, Chi; Li, Jing; Lei, Jianjun; Perreira Da Silva, Matthieu; Le Callet, Patrick

2017-10-01

In this paper, we investigate the visual attention modeling for stereoscopic video from the following two aspects. First, we build one large-scale eye tracking database as the benchmark of visual attention modeling for stereoscopic video. The database includes 47 video sequences and their corresponding eye fixation data. Second, we propose a novel computational model of visual attention for stereoscopic video based on Gestalt theory. In the proposed model, we extract the low-level features, including luminance, color, texture, and depth, from discrete cosine transform coefficients, which are used to calculate feature contrast for the spatial saliency computation. The temporal saliency is calculated by the motion contrast from the planar and depth motion features in the stereoscopic video sequences. The final saliency is estimated by fusing the spatial and temporal saliency with uncertainty weighting, which is estimated by the laws of proximity, continuity, and common fate in Gestalt theory. Experimental results show that the proposed method outperforms the state-of-the-art stereoscopic video saliency detection models on our built large-scale eye tracking database and one other database (DML-ITRACK-3D).

75 FR 36654 - Proposed Settlement Agreement

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-28

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9168-9] Proposed Settlement Agreement AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Proposed Settlement Agreement; request for public comment. SUMMARY.... 7413(g), notice is hereby given of a proposed settlement agreement to address lawsuits filed by...

75 FR 82390 - Proposed Settlement Agreement

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-30

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9246-2] Proposed Settlement Agreement AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Proposed Settlement Agreement; Request for Public Comment. SUMMARY... a proposed settlement agreement to address lawsuits filed by the following groups of Petitioners: (1...

75 FR 82009 - Proposed Settlement Agreement

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-29

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9245-1] Proposed Settlement Agreement AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Proposed Settlement Agreement; Request for Public Comment. SUMMARY... a proposed settlement agreement to address a lawsuit filed by the Center for Biological Diversity...

78 FR 59684 - Proposed Settlement Agreement

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-27

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9901-48-OGC] Proposed Settlement Agreement AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of proposed settlement agreement; request for public... hereby given of a proposed settlement agreement to address a lawsuit filed by the American Forest & Paper...

Multiscale musculoskeletal modelling, data–model fusion and electromyography-informed modelling

PubMed Central

Zhang, J.; Heidlauf, T.; Sartori, M.; Besier, T.; Röhrle, O.; Lloyd, D.

2016-01-01

This paper proposes methods and technologies that advance the state of the art for modelling the musculoskeletal system across the spatial and temporal scales; and storing these using efficient ontologies and tools. We present population-based modelling as an efficient method to rapidly generate individual morphology from only a few measurements and to learn from the ever-increasing supply of imaging data available. We present multiscale methods for continuum muscle and bone models; and efficient mechanostatistical methods, both continuum and particle-based, to bridge the scales. Finally, we examine both the importance that muscles play in bone remodelling stimuli and the latest muscle force prediction methods that use electromyography-assisted modelling techniques to compute musculoskeletal forces that best reflect the underlying neuromuscular activity. Our proposal is that, in order to have a clinically relevant virtual physiological human, (i) bone and muscle mechanics must be considered together; (ii) models should be trained on population data to permit rapid generation and use underlying principal modes that describe both muscle patterns and morphology; and (iii) these tools need to be available in an open-source repository so that the scientific community may use, personalize and contribute to the database of models. PMID:27051510

PL 89-313; Guide for Proposal Preparation and Project Operation: The South Dakota Model. Revised.

ERIC Educational Resources Information Center

Hadley, Marilyn B., Ed.

The guide is designed as a tool that can be used to write a proposal for funding from Public Law (PL) 89-313 (which amended the Elementary and Secondary Education Act of 1965). Grant awards under PL 89-313 are available to eligible State-operated and State-supported agencies serving handicapped children. After an overall needs assessment, the…

A semi-analytical bearing model considering outer race flexibility for model based bearing load monitoring

NASA Astrophysics Data System (ADS)

Kerst, Stijn; Shyrokau, Barys; Holweg, Edward

2018-05-01

This paper proposes a novel semi-analytical bearing model addressing flexibility of the bearing outer race structure. It furthermore presents the application of this model in a bearing load condition monitoring approach. The bearing model is developed as current computational low cost bearing models fail to provide an accurate description of the more and more common flexible size and weight optimized bearing designs due to their assumptions of rigidity. In the proposed bearing model raceway flexibility is described by the use of static deformation shapes. The excitation of the deformation shapes is calculated based on the modelled rolling element loads and a Fourier series based compliance approximation. The resulting model is computational low cost and provides an accurate description of the rolling element loads for flexible outer raceway structures. The latter is validated by a simulation-based comparison study with a well-established bearing simulation software tool. An experimental study finally shows the potential of the proposed model in a bearing load monitoring approach.

A proposed model membrane and test method for microneedle insertion studies.

PubMed

Larrañeta, Eneko; Moore, Jessica; Vicente-Pérez, Eva M; González-Vázquez, Patricia; Lutton, Rebecca; Woolfson, A David; Donnelly, Ryan F

2014-09-10

A commercial polymeric film (Parafilm M(®), a blend of a hydrocarbon wax and a polyolefin) was evaluated as a model membrane for microneedle (MN) insertion studies. Polymeric MN arrays were inserted into Parafilm M(®) (PF) and also into excised neonatal porcine skin. Parafilm M(®) was folded before the insertions to closely approximate thickness of the excised skin. Insertion depths were evaluated using optical coherence tomography (OCT) using either a force applied by a Texture Analyser or by a group of human volunteers. The obtained insertion depths were, in general, slightly lower, especially for higher forces, for PF than for skin. However, this difference was not a large, being less than the 10% of the needle length. Therefore, all these data indicate that this model membrane could be a good alternative to biological tissue for MN insertion studies. As an alternative method to OCT, light microscopy was used to evaluate the insertion depths of MN in the model membrane. This provided a rapid, simple method to compare different MN formulations. The use of Parafilm M(®), in conjunction with a standardised force/time profile applied by a Texture Analyser, could provide the basis for a rapid MN quality control test suitable for in-process use. It could also be used as a comparative test of insertion efficiency between candidate MN formulations. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

Formation of calcareous nodules in loess-paleosol sequences: Reviews of existing models with a proposed new "per evapotranspiration model"

NASA Astrophysics Data System (ADS)

Li, Yanrong; Zhang, Weiwei; Aydin, Adnan; Deng, Xiaohong

2018-04-01

Loess is a product of aeolian deposition during Quaternary glaciation cycles. Loess-paleosol sequences are rich in calcareous nodules (CNs). In the literature, two models are widely cited for the formation of CNs, namely "per descendum" and "per ascendum". However, there has been no direct testing or monitoring to support either of these contradictory models. This paper reviews a large number of multidisciplinary literature to evaluate the consistency, reliability and rationality of these two models. Three main conclusions are drawn: (1) the causative factors (variation of pH value along loess-paleosol sequence, decrease of CO2 partial pressure, and reduction of solvent water) that are used to support the per descendum model do not completely explain the supersaturation of infiltration solution with CaCO3, thereby making this model questionable; (2) the per ascendum model explains the formation of CNs along narrow horizons through upward evaporation; however, it fails to produce sporadic distributions and irregular shapes of nodules on loess slope faces and the frequent appearance of nodules around plant roots. In order to reconcile these deficiencies, we conducted an extensive field survey in various parts of Shanxi province. Based on this new set of observations, it was concluded that the "per ascendum" model can be extended to explain all occurrences of CNs. This extended model is called "per evapotranspiration".