TQM (Total Quality Management) SPARC (Special Process Action Review Committees) Handbook

DTIC Science & Technology

1989-08-01

This document describes the techniques used to support and guide the Special Process Action Review Committees for accomplishing their goals for Total Quality Management (TQM). It includes concepts and definitions, checklists, sample formats, and assessment criteria. Keywords: Continuous process improvement; Logistics information; Process analysis; Quality control; Quality assurance; Total Quality Management ; Statistical processes; Management Planning and control; Management training; Management information systems.

Can Institutions Have Quality Programming without Utilizing a Systematic Outcomes-Based Assessment Process?

ERIC Educational Resources Information Center

Weiner, Lauren; Bresciani, Marilee J.

2011-01-01

The researchers explored whether implementation of a systematic outcomes-based assessment process is necessary for demonstrating quality in service learning programs at a two-year and a four-year institution. The findings revealed that Western Community College and the University of the Coast maintained quality service-learning programs, which met…

Embracing Multiple Ways of Knowing in Regulatory Assessments of Quality in Australian Early Childhood Education and Care

ERIC Educational Resources Information Center

Jackson, Jen

2015-01-01

In 2012, a new assessment and rating process for Australian early childhood education and care (ECEC) services was introduced, using a new National Quality Standard (NQS). The NQS assessment and rating process has similarities to observational assessment systems used in educational research, and involves similar strategies for upholding…

Analysis of quality raw data of second generation sequencers with Quality Assessment Software.

PubMed

Ramos, Rommel Tj; Carneiro, Adriana R; Baumbach, Jan; Azevedo, Vasco; Schneider, Maria Pc; Silva, Artur

2011-04-18

Second generation technologies have advantages over Sanger; however, they have resulted in new challenges for the genome construction process, especially because of the small size of the reads, despite the high degree of coverage. Independent of the program chosen for the construction process, DNA sequences are superimposed, based on identity, to extend the reads, generating contigs; mismatches indicate a lack of homology and are not included. This process improves our confidence in the sequences that are generated. We developed Quality Assessment Software, with which one can review graphs showing the distribution of quality values from the sequencing reads. This software allow us to adopt more stringent quality standards for sequence data, based on quality-graph analysis and estimated coverage after applying the quality filter, providing acceptable sequence coverage for genome construction from short reads. Quality filtering is a fundamental step in the process of constructing genomes, as it reduces the frequency of incorrect alignments that are caused by measuring errors, which can occur during the construction process due to the size of the reads, provoking misassemblies. Application of quality filters to sequence data, using the software Quality Assessment, along with graphing analyses, provided greater precision in the definition of cutoff parameters, which increased the accuracy of genome construction.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spickett, Jeffery, E-mail: J.Spickett@curtin.edu.au; Faculty of Health Sciences, School of Public Health, Curtin University, Perth, Western Australia; Katscherian, Dianne

The approaches used for setting or reviewing air quality standards vary from country to country. The purpose of this research was to consider the potential to improve decision-making through integration of HIA into the processes to review and set air quality standards used in Australia. To assess the value of HIA in this policy process, its strengths and weaknesses were evaluated aligned with review of international processes for setting air quality standards. Air quality standard setting programmes elsewhere have either used HIA or have amalgamated and incorporated factors normally found within HIA frameworks. They clearly demonstrate the value of amore » formalised HIA process for setting air quality standards in Australia. The following elements should be taken into consideration when using HIA in standard setting. (a) The adequacy of a mainly technical approach in current standard setting procedures to consider social determinants of health. (b) The importance of risk assessment criteria and information within the HIA process. The assessment of risk should consider equity, the distribution of variations in air quality in different locations and the potential impacts on health. (c) The uncertainties in extrapolating evidence from one population to another or to subpopulations, especially the more vulnerable, due to differing environmental factors and population variables. (d) The significance of communication with all potential stakeholders on issues associated with the management of air quality. In Australia there is also an opportunity for HIA to be used in conjunction with the NEPM to develop local air quality standard measures. The outcomes of this research indicated that the use of HIA for air quality standard setting at the national and local levels would prove advantageous. -- Highlights: • Health Impact Assessment framework has been applied to a policy development process. • HIA process was evaluated for application in air quality standard setting. • Advantages of HIA in the air quality standard setting process are demonstrated.« less

Development of risk-based air quality management strategies under impacts of climate change.

PubMed

Liao, Kuo-Jen; Amar, Praveen; Tagaris, Efthimios; Russell, Armistead G

2012-05-01

Climate change is forecast to adversely affect air quality through perturbations in meteorological conditions, photochemical reactions, and precursor emissions. To protect the environment and human health from air pollution, there is an increasing recognition of the necessity of developing effective air quality management strategies under the impacts of climate change. This paper presents a framework for developing risk-based air quality management strategies that can help policy makers improve their decision-making processes in response to current and future climate change about 30-50 years from now. Development of air quality management strategies under the impacts of climate change is fundamentally a risk assessment and risk management process involving four steps: (1) assessment of the impacts of climate change and associated uncertainties; (2) determination of air quality targets; (3) selections of potential air quality management options; and (4) identification of preferred air quality management strategies that minimize control costs, maximize benefits, or limit the adverse effects of climate change on air quality when considering the scarcity of resources. The main challenge relates to the level of uncertainties associated with climate change forecasts and advancements in future control measures, since they will significantly affect the risk assessment results and development of effective air quality management plans. The concept presented in this paper can help decision makers make appropriate responses to climate change, since it provides an integrated approach for climate risk assessment and management when developing air quality management strategies. Development of climate-responsive air quality management strategies is fundamentally a risk assessment and risk management process. The risk assessment process includes quantification of climate change impacts on air quality and associated uncertainties. Risk management for air quality under the impacts of climate change includes determination of air quality targets, selections of potential management options, and identification of effective air quality management strategies through decision-making models. The risk-based decision-making framework can also be applied to develop climate-responsive management strategies for the other environmental dimensions and assess costs and benefits of future environmental management policies.

A conceptual study of automatic and semi-automatic quality assurance techniques for round image processing

NASA Technical Reports Server (NTRS)

1983-01-01

This report summarizes the results of a study conducted by Engineering and Economics Research (EER), Inc. under NASA Contract Number NAS5-27513. The study involved the development of preliminary concepts for automatic and semiautomatic quality assurance (QA) techniques for ground image processing. A distinction is made between quality assessment and the more comprehensive quality assurance which includes decision making and system feedback control in response to quality assessment.

Maximising Confidence in Assessment Decision-Making: A Springboard to Quality in Assessment.

ERIC Educational Resources Information Center

Clayton, Berwyn; Booth, Robin; Roy, Sue

The introduction of training packages has focused attention on the quality of assessment in the Australian vocational education and training (VET) sector on the quality of assessment. For the process of mutual recognition under the Australian Recognition Framework (ARF) to work effectively, there needs to be confidence in assessment decisions made…

Towards Quality Assessment in an EFL Programme

ERIC Educational Resources Information Center

Ali, Holi Ibrahim Holi; Al Ajmi, Ahmed Ali Saleh

2013-01-01

Assessment is central in education and the teaching-learning process. This study attempts to explore the perspectives and views about quality assessment among teachers of English as a Foreign Language (EFL), and to find ways of promoting quality assessment. Quantitative methodology was used to collect data. To answer the study questions, a…

Cluster randomized trial assessing the effects of rapid ethical assessment on informed consent comprehension in a low-resource setting.

PubMed

Addissie, Adamu; Abay, Serebe; Feleke, Yeweyenhareg; Newport, Melanie; Farsides, Bobbie; Davey, Gail

2016-07-12

Maximizing comprehension is a major challenge for informed consent processes in low-literacy and resource-limited settings. Application of rapid qualitative assessments to improve the informed consent process is increasingly considered useful. This study assessed the effects of Rapid Ethical Assessment (REA) on comprehension, retention and quality of the informed consent process. A cluster randomized trial was conducted among participants of HPV sero-prevalence study in two districts of Northern Ethiopia, in 2013. A total of 300 study participants, 150 in the intervention and 150 in the control group, were included in the study. For the intervention group, the informed consent process was designed with further revisions based on REA findings. Informed consent comprehension levels and quality of the consent process were measured using the Modular Informed Consent Comprehension Assessment (MICCA) and Quality of Informed Consent (QuIC) process assessment tools, respectively. Study recruitment rates were 88.7 % and 80.7 % (p = 0.05), while study retention rates were 85.7 % and 70.3 % (p < 0.005) for the intervention and control groups respectively. Overall, the mean informed consent comprehension scores for the intervention and control groups were 73.1 % and 45.2 %, respectively, with a mean difference in comprehension score of 27.9 % (95 % CI 24.0 % - 33.4 %; p < 0.001,). Mean scores for quality of informed consent for the intervention and control groups were 89.1 % and 78.5 %, respectively, with a mean difference of 10.5 % (95 % CI 6.8 -14.2 %; p < 0.001). Levels of informed consent comprehension, quality of the consent process, study recruitment and retention rates were significantly improved in the intervention group. We recommend REA as a potential modality to improve informed consent comprehension and quality of informed consent process in low resource settings.

Quality Assessment of TPB-Based Questionnaires: A Systematic Review

PubMed Central

Oluka, Obiageli Crystal; Nie, Shaofa; Sun, Yi

2014-01-01

Objective This review is aimed at assessing the quality of questionnaires and their development process based on the theory of planned behavior (TPB) change model. Methods A systematic literature search for studies with the primary aim of TPB-based questionnaire development was conducted in relevant databases between 2002 and 2012 using selected search terms. Ten of 1,034 screened abstracts met the inclusion criteria and were assessed for methodological quality using two different appraisal tools: one for the overall methodological quality of each study and the other developed for the appraisal of the questionnaire content and development process. Both appraisal tools consisted of items regarding the likelihood of bias in each study and were eventually combined to give the overall quality score for each included study. Results 8 of the 10 included studies showed low risk of bias in the overall quality assessment of each study, while 9 of the studies were of high quality based on the quality appraisal of questionnaire content and development process. Conclusion Quality appraisal of the questionnaires in the 10 reviewed studies was successfully conducted, highlighting the top problem areas (including: sample size estimation; inclusion of direct and indirect measures; and inclusion of questions on demographics) in the development of TPB-based questionnaires and the need for researchers to provide a more detailed account of their development process. PMID:24722323

Assessing Subjectivity in Sensor Data Post Processing via a Controlled Experiment

NASA Astrophysics Data System (ADS)

Jones, A. S.; Horsburgh, J. S.; Eiriksson, D.

2017-12-01

Environmental data collected by in situ sensors must be reviewed to verify validity, and conducting quality control often requires making edits in post processing to generate approved datasets. This process involves decisions by technicians, data managers, or data users on how to handle problematic data. Options include: removing data from a series, retaining data with annotations, and altering data based on algorithms related to adjacent data points or the patterns of data at other locations or of other variables. Ideally, given the same dataset and the same quality control guidelines, multiple data quality control technicians would make the same decisions in data post processing. However, despite the development and implementation of guidelines aimed to ensure consistent quality control procedures, we have faced ambiguity when performing post processing, and we have noticed inconsistencies in the practices of individuals performing quality control post processing. Technicians with the same level of training and using the same input datasets may produce different results, affecting the overall quality and comparability of finished data products. Different results may also be produced by technicians that do not have the same level of training. In order to assess the effect of subjective decision making by the individual technician on the end data product, we designed an experiment where multiple users performed quality control post processing on the same datasets using a consistent set of guidelines, field notes, and tools. We also assessed the effect of technician experience and training by conducting the same procedures with a group of novices unfamiliar with the data and the quality control process and compared their results to those generated by a group of more experienced technicians. In this presentation, we report our observations of the degree of subjectivity in sensor data post processing, assessing and quantifying the impacts of individual technician as well as technician experience on quality controlled data products.

Needs Assessment for the Use of NASA Remote Sensing Data in the Development and Implementation of Estuarine and Coastal Water Quality Standards

NASA Technical Reports Server (NTRS)

Spiering, Bruce; Underwood, Lauren; Ellis, Chris; Lehrter, John; Hagy, Jim; Schaeffer, Blake

2010-01-01

The goals of the project are to provide information from satellite remote sensing to support numeric nutrient criteria development and to determine data processing methods and data quality requirements to support nutrient criteria development and implementation. The approach is to identify water quality indicators that are used by decision makers to assess water quality and that are related to optical properties of the water; to develop remotely sensed data products based on algorithms relating remote sensing imagery to field-based observations of indicator values; to develop methods to assess estuarine water quality, including trends, spatial and temporal variability, and seasonality; and to develop tools to assist in the development and implementation of estuarine and coastal nutrient criteria. Additional slides present process, criteria development, typical data sources and analyses for criteria process, the power of remote sensing data for the process, examples from Pensacola Bay, spatial and temporal variability, pixel matchups, remote sensing validation, remote sensing in coastal waters, requirements for remotely sensed data products, and needs assessment. An additional presentation examines group engagement and information collection. Topics include needs assessment purpose and objectives, understanding water quality decision making, determining information requirements, and next steps.

Avoiding Assessment Anarchy. Quality Test Administration Strategies: Communicate Expectations, Reduce Variation, Increase Quality, Improve Relationships, Reward Excellence, Recognize Success.

ERIC Educational Resources Information Center

Matter, M. Kevin

This paper presents strategies that address the needs of the school district assessment office for standardized procedures to support reliable and efficient test processing and reporting and that meet the needs of school staff for test administration guidelines. The key to test administration and processing quality is a knowledgeable test…

A Quality Process Approach to Electronic System Reliability: Supplier Quality Assessment Procedure. Volume 2

DTIC Science & Technology

1993-11-01

AND SUPPORT SERVICE QUALITY ....... 16 3.5.7 SUPPLIER QUALITY ............................................................................. 16 3.6...RESULTS ......................................................................................................... 16 3.6.1 PRODUCT AND SERVICE QUALITY RESULTS...10 5.6 Business Process and Support Service Quality 20 5.7 Supplier Quality 20 6.0 Results 180 6.1 Product and Service Quality Results 90 6.2 Business

Taguchi experimental design to determine the taste quality characteristic of candied carrot

NASA Astrophysics Data System (ADS)

Ekawati, Y.; Hapsari, A. A.

2018-03-01

Robust parameter design is used to design product that is robust to noise factors so the product’s performance fits the target and delivers a better quality. In the process of designing and developing the innovative product of candied carrot, robust parameter design is carried out using Taguchi Method. The method is used to determine an optimal quality design. The optimal quality design is based on the process and the composition of product ingredients that are in accordance with consumer needs and requirements. According to the identification of consumer needs from the previous research, quality dimensions that need to be assessed are the taste and texture of the product. The quality dimension assessed in this research is limited to the taste dimension. Organoleptic testing is used for this assessment, specifically hedonic testing that makes assessment based on consumer preferences. The data processing uses mean and signal to noise ratio calculation and optimal level setting to determine the optimal process/composition of product ingredients. The optimal value is analyzed using confirmation experiments to prove that proposed product match consumer needs and requirements. The result of this research is identification of factors that affect the product taste and the optimal quality of product according to Taguchi Method.

Quality assessment of baby food made of different pre-processed organic raw materials under industrial processing conditions.

PubMed

Seidel, Kathrin; Kahl, Johannes; Paoletti, Flavio; Birlouez, Ines; Busscher, Nicolaas; Kretzschmar, Ursula; Särkkä-Tirkkonen, Marjo; Seljåsen, Randi; Sinesio, Fiorella; Torp, Torfinn; Baiamonte, Irene

2015-02-01

The market for processed food is rapidly growing. The industry needs methods for "processing with care" leading to high quality products in order to meet consumers' expectations. Processing influences the quality of the finished product through various factors. In carrot baby food, these are the raw material, the pre-processing and storage treatments as well as the processing conditions. In this study, a quality assessment was performed on baby food made from different pre-processed raw materials. The experiments were carried out under industrial conditions using fresh, frozen and stored organic carrots as raw material. Statistically significant differences were found for sensory attributes among the three autoclaved puree samples (e.g. overall odour F = 90.72, p < 0.001). Samples processed from frozen carrots show increased moisture content and decrease of several chemical constituents. Biocrystallization identified changes between replications of the cooking. Pre-treatment of raw material has a significant influence on the final quality of the baby food.

Self-assessment procedure using fuzzy sets

NASA Astrophysics Data System (ADS)

Mimi, Fotini

2000-10-01

Self-Assessment processes, initiated by a company itself and carried out by its own people, are considered to be the starting point for a regular strategic or operative planning process to ensure a continuous quality improvement. Their importance has increased by the growing relevance and acceptance of international quality awards such as the Malcolm Baldrige National Quality Award, the European Quality Award and the Deming Prize. Especially award winners use the instrument of a systematic and regular Self-Assessment and not only because they have to verify their quality and business results for at least three years. The Total Quality Model of the European Foundation for Quality Management (EFQM), used for the European Quality Award, is the basis for Self-Assessment in Europe. This paper presents a self-assessment supporting method based on a methodology of fuzzy control systems providing an effective means of converting the linguistic approximation into an automatic control strategy. In particular, the elements of the Quality Model mentioned above are interpreted as linguistic variables. The LR-type of a fuzzy interval is used for their representation. The input data has a qualitative character based on empirical investigation and expert knowledge and therefore the base- variables are ordinal scaled. The aggregation process takes place on the basis of a hierarchical structure. Finally, in order to render the use of the method more practical a software system on PC basis is developed and implemented.

Quality Measures for Hospice and Palliative Care: Piloting the PEACE Measures

PubMed Central

Rokoske, Franziska S.; Durham, Danielle; Cagle, John G.; Hanson, Laura C.

2014-01-01

Abstract Background: The Carolinas Center for Medical Excellence launched the PEACE project in 2006, under contract with the Centers for Medicare & Medicaid Services (CMS), to identify, develop, and pilot test quality measures for hospice and palliative care programs. Objectives: The project collected pilot data to test the usability and feasibility of potential quality measures and data collection processes for hospice and palliative care programs. Settings/subjects: Twenty-two hospices participating in a national Quality Improvement Collaborative (QIC) submitted data from 367 chart reviews for pain care and 45 chart reviews for nausea care. Fourteen additional hospices completed a one-time data submission of 126 chart reviews on 60 potential patient-level quality measures across eight domains of care and an organizational assessment evaluating structure and processes of care. Design: Usability was assessed by examining the range, variability and size of the populations targeted by each quality measure. Feasibility was assessed during the second pilot study by surveying data abstractors about the abstraction process and examining the rates of missing data. The impact of data collection processes was assessed by comparing results obtained using different processes. Results: Measures shown to be both usable and feasible included: screening for physical symptoms on admission and documentation of treatment preferences. Methods of data collection and measure construction appear to influence observed rates of quality of care. Conclusions: We successfully identified quality measures with potential for use in hospices and palliative care programs. Future research is needed to understand whether these measures are sensitive to quality improvement interventions. PMID:24921162

Portfolio Assessment and Quality Teaching

ERIC Educational Resources Information Center

Kim, Youb; Yazdian, Lisa Sensale

2014-01-01

Our article focuses on using portfolio assessment to craft quality teaching. Extant research literature on portfolio assessment suggests that the primary purpose of assessment is to serve learning, and portfolio assessments facilitate the process of making linkages among assessment, curriculum, and student learning (Asp, 2000; Bergeron, Wermuth,…

Software process assessments

NASA Technical Reports Server (NTRS)

Miller, Sharon E.; Tucker, George T.; Verducci, Anthony J., Jr.

1992-01-01

Software process assessments (SPA's) are part of an ongoing program of continuous quality improvements in AT&T. Their use was found to be very beneficial by software development organizations in identifying the issues facing the organization and the actions required to increase both quality and productivity in the organization.

TU-AB-BRD-04: Development of Quality Management Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomadsen, B.

2015-06-15

Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before amore » failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to perform failure modes and effects analysis analysis for a given process Learn what fault trees are all about Learn how to design a quality management program based upon the information obtained from process mapping, failure modes and effects analysis and fault tree analysis. Dunscombe: Director, TreatSafely, LLC and Center for the Assessment of Radiological Sciences; Consultant to IAEA and Varian Thomadsen: President, Center for the Assessment of Radiological Sciences Palta: Vice President of the Center for the Assessment of Radiological Sciences.« less

Total Quality Management of Information System for Quality Assessment of Pesantren Using Fuzzy-SERVQUAL

NASA Astrophysics Data System (ADS)

Faizah, Arbiati; Syafei, Wahyul Amien; Isnanto, R. Rizal

2018-02-01

This research proposed a model combining an approach of Total Quality Management (TQM) and Fuzzy method of Service Quality (SERVQUAL) to asses service quality. TQM implementation was as quality management orienting on customer's satisfaction by involving all stakeholders. SERVQUAL model was used to measure quality service based on five dimensions such as tangible, reliability, responsiveness, assurance, and empathy. Fuzzy set theory was to accommodate subjectivity and ambiguity of quality assessment. Input data consisted of indicator data and quality assessment aspect. Input data was, then, processed to be service quality assessment questionnaires of Pesantren by using Fuzzy method to get service quality score. This process consisted of some steps as follows : inputting dimension and questionnaire data to data base system, filling questionnaire through system, then, system calculated fuzzification, defuzzification, gap of quality expected and received by service receivers, and calculating each dimension rating showing quality refinement priority. Rating of each quality dimension was, then, displayed at dashboard system to enable users to see information. From system having been built, it could be known that tangible dimension had the highest gap, -0.399, thus it needs to be prioritized and gets evaluation and refinement action soon.

Web Service for Positional Quality Assessment: the Wps Tier

NASA Astrophysics Data System (ADS)

Xavier, E. M. A.; Ariza-López, F. J.; Ureña-Cámara, M. A.

2015-08-01

In the field of spatial data every day we have more and more information available, but we still have little or very little information about the quality of spatial data. We consider that the automation of the spatial data quality assessment is a true need for the geomatic sector, and that automation is possible by means of web processing services (WPS), and the application of specific assessment procedures. In this paper we propose and develop a WPS tier centered on the automation of the positional quality assessment. An experiment using the NSSDA positional accuracy method is presented. The experiment involves the uploading by the client of two datasets (reference and evaluation data). The processing is to determine homologous pairs of points (by distance) and calculate the value of positional accuracy under the NSSDA standard. The process generates a small report that is sent to the client. From our experiment, we reached some conclusions on the advantages and disadvantages of WPSs when applied to the automation of spatial data accuracy assessments.

Quality Assurance in American and British Higher Education: A Comparison.

ERIC Educational Resources Information Center

Stanley, Elizabeth C.; Patrick, William J.

1998-01-01

Compares quality improvement and accountability processes in the United States and United Kingdom. For the United Kingdom, looks at quality audits, institutional assessment, standards-based quality assurance, and research assessment; in the United States, looks at regional and specialized accreditation, performance indicator systems, academic…

Developing an Effective Assessment Process To Support Institutional Effectiveness Efforts.

ERIC Educational Resources Information Center

Albert, Angela R.; Pet-Armacost, Julia

This paper describes a process and an organizational structure in which Institutional Effectiveness (IE) can thrive. When such a system is implemented, continuous quality improvement can be sustained for the long term. Key concepts and philosophies found in the literature regarding continuous quality improvement and assessment in higher education…

A framework for assessing Health Economic Evaluation (HEE) quality appraisal instruments.

PubMed

Langer, Astrid

2012-08-16

Health economic evaluations support the health care decision-making process by providing information on costs and consequences of health interventions. The quality of such studies is assessed by health economic evaluation (HEE) quality appraisal instruments. At present, there is no instrument for measuring and improving the quality of such HEE quality appraisal instruments. Therefore, the objectives of this study are to establish a framework for assessing the quality of HEE quality appraisal instruments to support and improve their quality, and to apply this framework to those HEE quality appraisal instruments which have been subject to more scrutiny than others, in order to test the framework and to demonstrate the shortcomings of existing HEE quality appraisal instruments. To develop the quality assessment framework for HEE quality appraisal instruments, the experiences of using appraisal tools for clinical guidelines are used. Based on a deductive iterative process, clinical guideline appraisal instruments identified through literature search are reviewed, consolidated, and adapted to produce the final quality assessment framework for HEE quality appraisal instruments. The final quality assessment framework for HEE quality appraisal instruments consists of 36 items organized within 7 dimensions, each of which captures a specific domain of quality. Applying the quality assessment framework to four existing HEE quality appraisal instruments, it is found that these four quality appraisal instruments are of variable quality. The framework described in this study should be regarded as a starting point for appraising the quality of HEE quality appraisal instruments. This framework can be used by HEE quality appraisal instrument producers to support and improve the quality and acceptance of existing and future HEE quality appraisal instruments. By applying this framework, users of HEE quality appraisal instruments can become aware of methodological deficiencies inherent in existing HEE quality appraisal instruments. These shortcomings of existing HEE quality appraisal instruments are illustrated by the pilot test.

A framework for assessing Health Economic Evaluation (HEE) quality appraisal instruments

PubMed Central

2012-01-01

Background Health economic evaluations support the health care decision-making process by providing information on costs and consequences of health interventions. The quality of such studies is assessed by health economic evaluation (HEE) quality appraisal instruments. At present, there is no instrument for measuring and improving the quality of such HEE quality appraisal instruments. Therefore, the objectives of this study are to establish a framework for assessing the quality of HEE quality appraisal instruments to support and improve their quality, and to apply this framework to those HEE quality appraisal instruments which have been subject to more scrutiny than others, in order to test the framework and to demonstrate the shortcomings of existing HEE quality appraisal instruments. Methods To develop the quality assessment framework for HEE quality appraisal instruments, the experiences of using appraisal tools for clinical guidelines are used. Based on a deductive iterative process, clinical guideline appraisal instruments identified through literature search are reviewed, consolidated, and adapted to produce the final quality assessment framework for HEE quality appraisal instruments. Results The final quality assessment framework for HEE quality appraisal instruments consists of 36 items organized within 7 dimensions, each of which captures a specific domain of quality. Applying the quality assessment framework to four existing HEE quality appraisal instruments, it is found that these four quality appraisal instruments are of variable quality. Conclusions The framework described in this study should be regarded as a starting point for appraising the quality of HEE quality appraisal instruments. This framework can be used by HEE quality appraisal instrument producers to support and improve the quality and acceptance of existing and future HEE quality appraisal instruments. By applying this framework, users of HEE quality appraisal instruments can become aware of methodological deficiencies inherent in existing HEE quality appraisal instruments. These shortcomings of existing HEE quality appraisal instruments are illustrated by the pilot test. PMID:22894708

Image quality and dose differences caused by vendor-specific image processing of neonatal radiographs.

PubMed

Sensakovic, William F; O'Dell, M Cody; Letter, Haley; Kohler, Nathan; Rop, Baiywo; Cook, Jane; Logsdon, Gregory; Varich, Laura

2016-10-01

Image processing plays an important role in optimizing image quality and radiation dose in projection radiography. Unfortunately commercial algorithms are black boxes that are often left at or near vendor default settings rather than being optimized. We hypothesize that different commercial image-processing systems, when left at or near default settings, create significant differences in image quality. We further hypothesize that image-quality differences can be exploited to produce images of equivalent quality but lower radiation dose. We used a portable radiography system to acquire images on a neonatal chest phantom and recorded the entrance surface air kerma (ESAK). We applied two image-processing systems (Optima XR220amx, by GE Healthcare, Waukesha, WI; and MUSICA(2) by Agfa HealthCare, Mortsel, Belgium) to the images. Seven observers (attending pediatric radiologists and radiology residents) independently assessed image quality using two methods: rating and matching. Image-quality ratings were independently assessed by each observer on a 10-point scale. Matching consisted of each observer matching GE-processed images and Agfa-processed images with equivalent image quality. A total of 210 rating tasks and 42 matching tasks were performed and effective dose was estimated. Median Agfa-processed image-quality ratings were higher than GE-processed ratings. Non-diagnostic ratings were seen over a wider range of doses for GE-processed images than for Agfa-processed images. During matching tasks, observers matched image quality between GE-processed images and Agfa-processed images acquired at a lower effective dose (11 ± 9 μSv; P < 0.0001). Image-processing methods significantly impact perceived image quality. These image-quality differences can be exploited to alter protocols and produce images of equivalent image quality but lower doses. Those purchasing projection radiography systems or third-party image-processing software should be aware that image processing can significantly impact image quality when settings are left near default values.

Assessing Quality in Home Visiting Programs

ERIC Educational Resources Information Center

Korfmacher, Jon; Laszewski, Audrey; Sparr, Mariel; Hammel, Jennifer

2013-01-01

Defining quality and designing a quality assessment measure for home visitation programs is a complex and multifaceted undertaking. This article summarizes the process used to create the Home Visitation Program Quality Rating Tool (HVPQRT) and identifies next steps for its development. The HVPQRT measures both structural and dynamic features of…

Effects of Reflection Category and Reflection Quality on Learning Outcomes during Web-Based Portfolio Assessment Process: A Case Study of High School Students in Computer Application Course

ERIC Educational Resources Information Center

Chou, Pao-Nan; Chang, Chi-Cheng

2011-01-01

This study examines the effects of reflection category and reflection quality on learning outcomes during Web-based portfolio assessment process. Experimental subjects consist of forty-five eight-grade students in a "Computer Application" course. Through the Web-based portfolio assessment system, these students write reflection, and join…

Assessing Quality and Evaluating Performance in Higher Education: Worlds Apart or Complementary Views?

ERIC Educational Resources Information Center

Sarrico, Claudia S.; Rosa, Maria J.; Teixeira, Pedro N.; Cardoso, Margarida F.

2010-01-01

This paper reflects on quality assessment and performance evaluation in higher education, namely by analysing the insufficient link between those two aspects. We start by reviewing the current state of the art regarding different processes and mechanisms of quality assessment and performance evaluation and discuss some of the major issues…

TU-AB-BRD-01: Process Mapping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palta, J.

2015-06-15

Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before amore » failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to perform failure modes and effects analysis analysis for a given process Learn what fault trees are all about Learn how to design a quality management program based upon the information obtained from process mapping, failure modes and effects analysis and fault tree analysis. Dunscombe: Director, TreatSafely, LLC and Center for the Assessment of Radiological Sciences; Consultant to IAEA and Varian Thomadsen: President, Center for the Assessment of Radiological Sciences Palta: Vice President of the Center for the Assessment of Radiological Sciences.« less

Measuring health care process quality with software quality measures.

PubMed

Yildiz, Ozkan; Demirörs, Onur

2012-01-01

Existing quality models focus on some specific diseases, clinics or clinical areas. Although they contain structure, process, or output type measures, there is no model which measures quality of health care processes comprehensively. In addition, due to the not measured overall process quality, hospitals cannot compare quality of processes internally and externally. To bring a solution to above problems, a new model is developed from software quality measures. We have adopted the ISO/IEC 9126 software quality standard for health care processes. Then, JCIAS (Joint Commission International Accreditation Standards for Hospitals) measurable elements were added to model scope for unifying functional requirements. Assessment (diagnosing) process measurement results are provided in this paper. After the application, it was concluded that the model determines weak and strong aspects of the processes, gives a more detailed picture for the process quality, and provides quantifiable information to hospitals to compare their processes with multiple organizations.

Water-Quality Assessment of the High Plains Aquifer, 1999-2004

USGS Publications Warehouse

McMahon, Peter B.; Dennehy, Kevin F.; Bruce, Breton W.; Gurdak, Jason J.; Qi, Sharon L.

2007-01-01

Water quality of the High Plains aquifer was assessed for the period 1999-2004 as part of the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program. This effort represents the first systematic regional assessment of water quality in this nationally important aquifer. A stratified, nested group of studies was designed to assess linkages between the quality of water recharging the aquifer, the effect of transport through the hydrologic system on water quality, and the quality of the resource used for human consumption and agricultural applications. The stratified, nested design facilitated upscaling of monitoring results to unmonitored areas of the aquifer as well as upscaling of process understanding from local to regional scales.

Informatics: essential infrastructure for quality assessment and improvement in nursing.

PubMed Central

Henry, S B

1995-01-01

In recent decades there have been major advances in the creation and implementation of information technologies and in the development of measures of health care quality. The premise of this article is that informatics provides essential infrastructure for quality assessment and improvement in nursing. In this context, the term quality assessment and improvement comprises both short-term processes such as continuous quality improvement (CQI) and long-term outcomes management. This premise is supported by 1) presentation of a historical perspective on quality assessment and improvement; 2) delineation of the types of data required for quality assessment and improvement; and 3) description of the current and potential uses of information technology in the acquisition, storage, transformation, and presentation of quality data, information, and knowledge. PMID:7614118

TU-AB-BRD-00: Task Group 100

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2015-06-15

Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before amore » failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to perform failure modes and effects analysis analysis for a given process Learn what fault trees are all about Learn how to design a quality management program based upon the information obtained from process mapping, failure modes and effects analysis and fault tree analysis. Dunscombe: Director, TreatSafely, LLC and Center for the Assessment of Radiological Sciences; Consultant to IAEA and Varian Thomadsen: President, Center for the Assessment of Radiological Sciences Palta: Vice President of the Center for the Assessment of Radiological Sciences.« less

TU-AB-BRD-03: Fault Tree Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunscombe, P.

2015-06-15

Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before amore » failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to perform failure modes and effects analysis analysis for a given process Learn what fault trees are all about Learn how to design a quality management program based upon the information obtained from process mapping, failure modes and effects analysis and fault tree analysis. Dunscombe: Director, TreatSafely, LLC and Center for the Assessment of Radiological Sciences; Consultant to IAEA and Varian Thomadsen: President, Center for the Assessment of Radiological Sciences Palta: Vice President of the Center for the Assessment of Radiological Sciences.« less

TU-AB-BRD-02: Failure Modes and Effects Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huq, M.

2015-06-15

Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before amore » failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to perform failure modes and effects analysis analysis for a given process Learn what fault trees are all about Learn how to design a quality management program based upon the information obtained from process mapping, failure modes and effects analysis and fault tree analysis. Dunscombe: Director, TreatSafely, LLC and Center for the Assessment of Radiological Sciences; Consultant to IAEA and Varian Thomadsen: President, Center for the Assessment of Radiological Sciences Palta: Vice President of the Center for the Assessment of Radiological Sciences.« less

Doctors or technicians: assessing quality of medical education

PubMed Central

Hasan, Tayyab

2010-01-01

Medical education institutions usually adapt industrial quality management models that measure the quality of the process of a program but not the quality of the product. The purpose of this paper is to analyze the impact of industrial quality management models on medical education and students, and to highlight the importance of introducing a proper educational quality management model. Industrial quality management models can measure the training component in terms of competencies, but they lack the educational component measurement. These models use performance indicators to assess their process improvement efforts. Researchers suggest that the performance indicators used in educational institutions may only measure their fiscal efficiency without measuring the quality of the educational experience of the students. In most of the institutions, where industrial models are used for quality assurance, students are considered as customers and are provided with the maximum services and facilities possible. Institutions are required to fulfill a list of recommendations from the quality control agencies in order to enhance student satisfaction and to guarantee standard services. Quality of medical education should be assessed by measuring the impact of the educational program and quality improvement procedures in terms of knowledge base development, behavioral change, and patient care. Industrial quality models may focus on academic support services and processes, but educational quality models should be introduced in parallel to focus on educational standards and products. PMID:23745059

Doctors or technicians: assessing quality of medical education.

PubMed

Hasan, Tayyab

2010-01-01

Medical education institutions usually adapt industrial quality management models that measure the quality of the process of a program but not the quality of the product. The purpose of this paper is to analyze the impact of industrial quality management models on medical education and students, and to highlight the importance of introducing a proper educational quality management model. Industrial quality management models can measure the training component in terms of competencies, but they lack the educational component measurement. These models use performance indicators to assess their process improvement efforts. Researchers suggest that the performance indicators used in educational institutions may only measure their fiscal efficiency without measuring the quality of the educational experience of the students. In most of the institutions, where industrial models are used for quality assurance, students are considered as customers and are provided with the maximum services and facilities possible. Institutions are required to fulfill a list of recommendations from the quality control agencies in order to enhance student satisfaction and to guarantee standard services. Quality of medical education should be assessed by measuring the impact of the educational program and quality improvement procedures in terms of knowledge base development, behavioral change, and patient care. Industrial quality models may focus on academic support services and processes, but educational quality models should be introduced in parallel to focus on educational standards and products.

Embedded Formative Assessment and Classroom Process Quality: How Do They Interact in Promoting Science Understanding?

ERIC Educational Resources Information Center

Decristan, Jasmin; Klieme, Eckhard; Kunter, Mareike; Hochweber, Jan; Büttner, Gerhard; Fauth, Benjamin; Hondrich, A. Lena; Rieser, Svenja; Hertel, Silke; Hardy, Ilonca

2015-01-01

In this study we examine the interplay between curriculum-embedded formative assessment--a well-known teaching practice--and general features of classroom process quality (i.e., cognitive activation, supportive climate, classroom management) and their combined effect on elementary school students' understanding of the scientific concepts of…

Objective assessment of MPEG-2 video quality

NASA Astrophysics Data System (ADS)

Gastaldo, Paolo; Zunino, Rodolfo; Rovetta, Stefano

2002-07-01

The increasing use of video compression standards in broadcasting television systems has required, in recent years, the development of video quality measurements that take into account artifacts specifically caused by digital compression techniques. In this paper we present a methodology for the objective quality assessment of MPEG video streams by using circular back-propagation feedforward neural networks. Mapping neural networks can render nonlinear relationships between objective features and subjective judgments, thus avoiding any simplifying assumption on the complexity of the model. The neural network processes an instantaneous set of input values, and yields an associated estimate of perceived quality. Therefore, the neural-network approach turns objective quality assessment into adaptive modeling of subjective perception. The objective features used for the estimate are chosen according to the assessed relevance to perceived quality and are continuously extracted in real time from compressed video streams. The overall system mimics perception but does not require any analytical model of the underlying physical phenomenon. The capability to process compressed video streams represents an important advantage over existing approaches, like avoiding the stream-decoding process greatly enhances real-time performance. Experimental results confirm that the system provides satisfactory, continuous-time approximations for actual scoring curves concerning real test videos.

Evaluating Core Quality for a Mars Sample Return Mission

NASA Technical Reports Server (NTRS)

Weiss, D. K.; Budney, C.; Shiraishi, L.; Klein, K.

2012-01-01

Sample return missions, including the proposed Mars Sample Return (MSR) mission, propose to collect core samples from scientifically valuable sites on Mars. These core samples would undergo extreme forces during the drilling process, and during the reentry process if the EEV (Earth Entry Vehicle) performed a hard landing on Earth. Because of the foreseen damage to the stratigraphy of the cores, it is important to evaluate each core for rock quality. However, because no core sample return mission has yet been conducted to another planetary body, it remains unclear as to how to assess the cores for rock quality. In this report, we describe the development of a metric designed to quantitatively assess the mechanical quality of any rock cores returned from Mars (or other planetary bodies). We report on the process by which we tested the metric on core samples of Mars analogue materials, and the effectiveness of the core assessment metric (CAM) in assessing rock core quality before and after the cores were subjected to shocking (g forces representative of an EEV landing).

Study of the Impacts of the Quality Assessment of Undergraduate Education Policy in China: Students' Perceptions

ERIC Educational Resources Information Center

Liu, Shuiyun; Yu, Hui

2014-01-01

This paper analyzes a higher education policy issued in China in 2002: "the Quality Assessment of Undergraduate Education Policy." It examines students' perceptions of the policy impacts and students' roles in the evaluation process by semi-structured interviews and questionnaire surveys. It reveals that the quality assessment in China…

Quality assurance and reliability sub-committee W88-0/Mk5 weapon assessment NSA lab test results (u)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitney, Earl M

2010-11-29

The purpose of this report is to gather appropriate level of relevant stockpile surveillance data to assess trends in the NEP quality, reliability, performance, and safety over the life of the system. The objectives are to gather relevant stockpile data to assess NEP quality and trends and to develop metrics to assess the suitability of the surveillance sampling regime to meet assessment process requirements.

Automatic Assessment of Acquisition and Transmission Losses in Indian Remote Sensing Satellite Data

NASA Astrophysics Data System (ADS)

Roy, D.; Purna Kumari, B.; Manju Sarma, M.; Aparna, N.; Gopal Krishna, B.

2016-06-01

The quality of Remote Sensing data is an important parameter that defines the extent of its usability in various applications. The data from Remote Sensing satellites is received as raw data frames at the ground station. This data may be corrupted with data losses due to interferences during data transmission, data acquisition and sensor anomalies. Thus it is important to assess the quality of the raw data before product generation for early anomaly detection, faster corrective actions and product rejection minimization. Manual screening of raw images is a time consuming process and not very accurate. In this paper, an automated process for identification and quantification of losses in raw data like pixel drop out, line loss and data loss due to sensor anomalies is discussed. Quality assessment of raw scenes based on these losses is also explained. This process is introduced in the data pre-processing stage and gives crucial data quality information to users at the time of browsing data for product ordering. It has also improved the product generation workflow by enabling faster and more accurate quality estimation.

The quality of instruments to assess the process of shared decision making: A systematic review.

PubMed

Gärtner, Fania R; Bomhof-Roordink, Hanna; Smith, Ian P; Scholl, Isabelle; Stiggelbout, Anne M; Pieterse, Arwen H

2018-01-01

To inventory instruments assessing the process of shared decision making and appraise their measurement quality, taking into account the methodological quality of their validation studies. In a systematic review we searched seven databases (PubMed, Embase, Emcare, Cochrane, PsycINFO, Web of Science, Academic Search Premier) for studies investigating instruments measuring the process of shared decision making. Per identified instrument, we assessed the level of evidence separately for 10 measurement properties following a three-step procedure: 1) appraisal of the methodological quality using the COnsensus-based Standards for the selection of health status Measurement INstruments (COSMIN) checklist, 2) appraisal of the psychometric quality of the measurement property using three possible quality scores, 3) best-evidence synthesis based on the number of studies, their methodological and psychometrical quality, and the direction and consistency of the results. The study protocol was registered at PROSPERO: CRD42015023397. We included 51 articles describing the development and/or evaluation of 40 shared decision-making process instruments: 16 patient questionnaires, 4 provider questionnaires, 18 coding schemes and 2 instruments measuring multiple perspectives. There is an overall lack of evidence for their measurement quality, either because validation is missing or methods are poor. The best-evidence synthesis indicated positive results for a major part of instruments for content validity (50%) and structural validity (53%) if these were evaluated, but negative results for a major part of instruments when inter-rater reliability (47%) and hypotheses testing (59%) were evaluated. Due to the lack of evidence on measurement quality, the choice for the most appropriate instrument can best be based on the instrument's content and characteristics such as the perspective that they assess. We recommend refinement and validation of existing instruments, and the use of COSMIN-guidelines to help guarantee high-quality evaluations.

Identification of the hydrogeochemical processes and assessment of groundwater quality using classic integrated geochemical methods in the Southeastern part of Ordos basin, China.

PubMed

Yang, Qingchun; Li, Zijun; Ma, Hongyun; Wang, Luchen; Martín, Jordi Delgado

2016-11-01

Insufficient understanding of the hydrogeochemistry of aquifers makes it necessary to conduct a preliminary water quality assessment in the southern region of Ordos Basin, an arid area in the world. In this paper, the major ions of groundwater have been studied aiming at evaluating the hydrogeochemical processes that probably affect the groundwater quality using 150 samples collected in 2015. The two prevalent hydrochemical facies, HCO 3 Mg·Na·Ca and HCO 3 Mg·Ca·Na type water, have been identified based on the hydrochemical analysis from Piper trilinear diagram. Compositional relations have been used to assess the origin of solutes and confirm the predominant hydrogeochemical processes responsible for the various ions in the groundwater. The results show that the ions are derived from leaching effect, evaporation and condensation, cation exchange, mixing effect and human activities. Finally groundwater quality was assessed with single factor and set pair methods, the results indicate that groundwater quality in the study region is generally poor in terms of standard of national groundwater quality. The results obtained in this study will be useful to understand the groundwater quality status for effective management and utilization of the groundwater resource. Copyright © 2016 Elsevier Ltd. All rights reserved.

Engineering Quality Software: 10 Recommendations for Improved Software Quality Management

DTIC Science & Technology

2010-04-27

lack of user involvement • Inadequate Software Process Management & Control By Contractors • No “Team” of Vendors and users; little SME participation...1990 Quality Perspectives • Process Quality ( CMMI ) • Product Quality (ISO/IEC 2500x) – Internal Quality Attributes – External Quality Attributes... CMMI /ISO 9000 Assessments – Capture organizational knowledge • Identify best practices, lessons learned Know where you are, and where you need to be

Key Elements for Judging the Quality of a Risk Assessment

PubMed Central

Fenner-Crisp, Penelope A.; Dellarco, Vicki L.

2016-01-01

Background: Many reports have been published that contain recommendations for improving the quality, transparency, and usefulness of decision making for risk assessments prepared by agencies of the U.S. federal government. A substantial measure of consensus has emerged regarding the characteristics that high-quality assessments should possess. Objective: The goal was to summarize the key characteristics of a high-quality assessment as identified in the consensus-building process and to integrate them into a guide for use by decision makers, risk assessors, peer reviewers and other interested stakeholders to determine if an assessment meets the criteria for high quality. Discussion: Most of the features cited in the guide are applicable to any type of assessment, whether it encompasses one, two, or all four phases of the risk-assessment paradigm; whether it is qualitative or quantitative; and whether it is screening level or highly sophisticated and complex. Other features are tailored to specific elements of an assessment. Just as agencies at all levels of government are responsible for determining the effectiveness of their programs, so too should they determine the effectiveness of their assessments used in support of their regulatory decisions. Furthermore, if a nongovernmental entity wishes to have its assessments considered in the governmental regulatory decision-making process, then these assessments should be judged in the same rigorous manner and be held to similar standards. Conclusions: The key characteristics of a high-quality assessment can be summarized and integrated into a guide for judging whether an assessment possesses the desired features of high quality, transparency, and usefulness. Citation: Fenner-Crisp PA, Dellarco VL. 2016. Key elements for judging the quality of a risk assessment. Environ Health Perspect 124:1127–1135; http://dx.doi.org/10.1289/ehp.1510483 PMID:26862984

Development of a course review process.

PubMed

Persky, Adam M; Joyner, Pamela U; Cox, Wendy C

2012-09-10

To describe and assess a course review process designed to enhance course quality. A course review process led by the curriculum and assessment committees was designed for all required courses in the doctor of pharmacy (PharmD) program at a school of pharmacy. A rubric was used by the review team to address 5 areas: course layout and integration, learning outcomes, assessment, resources and materials, and learner interaction. One hundred percent of targeted courses, or 97% of all required courses, were reviewed from January to August 2010 (n=30). Approximately 3.5 recommendations per course were made, resulting in improvement in course evaluation items related to learning outcomes. Ninety-five percent of reviewers and 85% of course directors agreed that the process was objective and the course review process was important. The course review process was objective and effective in improving course quality. Future work will explore the effectiveness of an integrated, continual course review process in improving the quality of pharmacy education.

42 CFR 431.830 - Basic elements of the Medicaid quality control (MQC) claims processing assessment system.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Basic elements of the Medicaid quality control (MQC... & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS STATE ORGANIZATION AND GENERAL ADMINISTRATION Quality Control Medicaid Quality Control (mqc) Claims Processing...

Evidence based post graduate training. A systematic review of reviews based on the WFME quality framework

PubMed Central

2011-01-01

Background A framework for high quality in post graduate training has been defined by the World Federation of Medical Education (WFME). The objective of this paper is to perform a systematic review of reviews to find current evidence regarding aspects of quality of post graduate training and to organise the results following the 9 areas of the WFME framework. Methods The systematic literature review was conducted in 2009 in Medline Ovid, EMBASE, ERIC and RDRB databases from 1995 onward. The reviews were selected by two independent researchers and a quality appraisal was based on the SIGN tool. Results 31 reviews met inclusion criteria. The majority of the reviews provided information about the training process (WFME area 2), the assessment of trainees (WFME area 3) and the trainees (WFME area 4). One review covered the area 8 'governance and administration'. No review was found in relation to the mission and outcomes, the evaluation of the training process and the continuous renewal (respectively areas 1, 7 and 9 of the WFME framework). Conclusions The majority of the reviews provided information about the training process, the assessment of trainees and the trainees. Indicators used for quality assessment purposes of post graduate training should be based on this evidence but further research is needed for some areas in particular to assess the quality of the training process. PMID:21977898

Nurse practitioners as attending providers for workers with uncomplicated back injuries: using administrative data to evaluate quality and process of care.

PubMed

Sears, Jeanne M; Wickizer, Thomas M; Franklin, Gary M; Cheadle, Allen D; Berkowitz, Bobbie

2007-08-01

The objectives of this study were 1) to identify quality and process of care indicators available in administrative workers' compensation data and to document their association with work disability outcomes, and 2) to use these indicators to assess whether nurse practitioners (NPs), recently authorized to serve as attending providers for injured workers in Washington State, performed differently than did primary care physicians (PCPs). Quality and process of care indicators for NP and PCP back injury claims from Washington State were compared using direct standardization and logistic regression. This study found little evidence of differences between NP and PCP claims in case mix or quality of care. The process of care indicators that we identified were highly associated with the duration of work disability and have potential for further development to assess and promote quality improvement.

Assessing the influence of component processing and donor characteristics on quality of red cell concentrates using quality control data.

PubMed

Jordan, A; Chen, D; Yi, Q-L; Kanias, T; Gladwin, M T; Acker, J P

2016-07-01

Quality control (QC) data collected by blood services are used to monitor production and to ensure compliance with regulatory standards. We demonstrate how analysis of quality control data can be used to highlight the sources of variability within red cell concentrates (RCCs). We merged Canadian Blood Services QC data with manufacturing and donor records for 28 227 RCC between June 2011 and October 2014. Units were categorized based on processing method, bag manufacturer, donor age and donor sex, then assessed based on product characteristics: haemolysis and haemoglobin levels, unit volume, leucocyte count and haematocrit. Buffy-coat method (top/bottom)-processed units exhibited lower haemolysis than units processed using the whole-blood filtration method (top/top). Units from female donors exhibited lower haemolysis than male donations. Processing method influenced unit volume and the ratio of additive solution to residual plasma. Stored red blood cell characteristics are influenced by prestorage processing and donor factors. Understanding the relationship between processing, donors and RCC quality will help blood services to ensure the safety of transfused products. © 2016 International Society of Blood Transfusion.

Quality Self Assessment: A Process of Course Team Development or Contrived Collegiality and Impression Management?

ERIC Educational Resources Information Center

Boocock, Andrew

2011-01-01

Ethnographic research in an FE College (College X) between 2000 and 2005 was designed to uncover the extent to which quality self-assessment processes had effectively utilised productive motivational inputs (i.e. lecturer self-interest, intrinsic motivation, altruism and tacit knowledge) in line with New Labour's agenda of improved skills in…

Methodology for stereoscopic motion-picture quality assessment

NASA Astrophysics Data System (ADS)

Voronov, Alexander; Vatolin, Dmitriy; Sumin, Denis; Napadovsky, Vyacheslav; Borisov, Alexey

2013-03-01

Creating and processing stereoscopic video imposes additional quality requirements related to view synchronization. In this work we propose a set of algorithms for detecting typical stereoscopic-video problems, which appear owing to imprecise setup of capture equipment or incorrect postprocessing. We developed a methodology for analyzing the quality of S3D motion pictures and for revealing their most problematic scenes. We then processed 10 modern stereo films, including Avatar, Resident Evil: Afterlife and Hugo, and analyzed changes in S3D-film quality over the years. This work presents real examples of common artifacts (color and sharpness mismatch, vertical disparity and excessive horizontal disparity) in the motion pictures we processed, as well as possible solutions for each problem. Our results enable improved quality assessment during the filming and postproduction stages.

Comparisons of Observed Process Quality in German and American Infant/Toddler Programs

ERIC Educational Resources Information Center

Tietze, Wolfgang; Cryer, Debby

2004-01-01

Observed process quality in infant/toddler classrooms was compared in Germany (n = 75) and the USA (n = 219). Process quality was assessed with the Infant/Toddler Environment Rating Scale(ITERS) and parent attitudes about ITERS content with the ITERS Parent Questionnaire (ITERSPQ). The ITERS had comparable reliabilities in the two countries and…

Peer Review Improves the Quality of MCQ Examinations

ERIC Educational Resources Information Center

Malau-Aduli, Bunmi S.; Zimitat, Craig

2012-01-01

The aim of this study was to assess the effect of the introduction of peer review processes on the quality of multiple-choice examinations in the first three years of an Australian medical course. The impact of the peer review process and overall quality assurance (QA) processes were evaluated by comparing the examination data generated in earlier…

Assessment of Service Desk Quality at an Academic Health Sciences Library.

PubMed

Blevins, Amy E; DeBerg, Jennifer; Kiscaden, Elizabeth

2016-01-01

Due to an identified need for formal assessment, a small team of librarians designed and administered a survey to gauge the quality of customer service at their academic health sciences library. Though results did not drive major changes to services, several important improvements were implemented and a process was established to serve as a foundation for future use. This article details the assessment process used and lessons learned during the project.

ASQ Program Observation Instrument: A Tool for Assessing School-Age Child Care Quality.

ERIC Educational Resources Information Center

O'Connor, Susan; And Others

ASQ (Assessing School-Aged Child Care Quality) is a system for determining the quality of school-age child care programs. The ASQ Program Observation Instrument is a ten-step, self assessment process to guide program improvement. This instrument does not work well in full-day programs that have a single focus, but works well in programs that offer…

Use of a quality trait index to increase the reliability of phenotypic evaluations in broccoli

USDA-ARS?s Scientific Manuscript database

Selection of superior broccoli hybrids involves multiple considerations, including optimization of head quality traits. Quality assessment of broccoli heads is often confounded by relatively subjective human preferences for optimal appearance of heads. To assist the selection process, we assessed fi...

Exploiting mAb structure characteristics for a directed QbD implementation in early process development.

PubMed

Karlberg, Micael; von Stosch, Moritz; Glassey, Jarka

2018-03-07

In today's biopharmaceutical industries, the lead time to develop and produce a new monoclonal antibody takes years before it can be launched commercially. The reasons lie in the complexity of the monoclonal antibodies and the need for high product quality to ensure clinical safety which has a significant impact on the process development time. Frameworks such as quality by design are becoming widely used by the pharmaceutical industries as they introduce a systematic approach for building quality into the product. However, full implementation of quality by design has still not been achieved due to attrition mainly from limited risk assessment of product properties as well as the large number of process factors affecting product quality that needs to be investigated during the process development. This has introduced a need for better methods and tools that can be used for early risk assessment and predictions of critical product properties and process factors to enhance process development and reduce costs. In this review, we investigate how the quantitative structure-activity relationships framework can be applied to an existing process development framework such as quality by design in order to increase product understanding based on the protein structure of monoclonal antibodies. Compared to quality by design, where the effect of process parameters on the drug product are explored, quantitative structure-activity relationships gives a reversed perspective which investigates how the protein structure can affect the performance in different unit operations. This provides valuable information that can be used during the early process development of new drug products where limited process understanding is available. Thus, quantitative structure-activity relationships methodology is explored and explained in detail and we investigate the means of directly linking the structural properties of monoclonal antibodies to process data. The resulting information as a decision tool can help to enhance the risk assessment to better aid process development and thereby overcome some of the limitations and challenges present in QbD implementation today.

Assessing Educational Processes Using Total-Quality-Management Measurement Tools.

ERIC Educational Resources Information Center

Macchia, Peter, Jr.

1993-01-01

Discussion of the use of Total Quality Management (TQM) assessment tools in educational settings highlights and gives examples of fishbone diagrams, or cause and effect charts; Pareto diagrams; control charts; histograms and check sheets; scatter diagrams; and flowcharts. Variation and quality are discussed in terms of continuous process…

Software component quality evaluation

NASA Technical Reports Server (NTRS)

Clough, A. J.

1991-01-01

The paper describes a software inspection process that can be used to evaluate the quality of software components. Quality criteria, process application, independent testing of the process and proposed associated tool support are covered. Early results indicate that this technique is well suited for assessing software component quality in a standardized fashion. With automated machine assistance to facilitate both the evaluation and selection of software components, such a technique should promote effective reuse of software components.

An assessment model for quality management

NASA Astrophysics Data System (ADS)

Völcker, Chr.; Cass, A.; Dorling, A.; Zilioli, P.; Secchi, P.

2002-07-01

SYNSPACE together with InterSPICE and Alenia Spazio is developing an assessment method to determine the capability of an organisation in the area of quality management. The method, sponsored by the European Space Agency (ESA), is called S9kS (SPiCE- 9000 for SPACE). S9kS is based on ISO 9001:2000 with additions from the quality standards issued by the European Committee for Space Standardization (ECSS) and ISO 15504 - Process Assessments. The result is a reference model that supports the expansion of the generic process assessment framework provided by ISO 15504 to nonsoftware areas. In order to be compliant with ISO 15504, requirements from ISO 9001 and ECSS-Q-20 and Q-20-09 have been turned into process definitions in terms of Purpose and Outcomes, supported by a list of detailed indicators such as Practices, Work Products and Work Product Characteristics. In coordination with this project, the capability dimension of ISO 15504 has been revised to be consistent with ISO 9001. As contributions from ISO 9001 and the space quality assurance standards are separable, the stripped down version S9k offers organisations in all industries an assessment model based solely on ISO 9001, and is therefore interesting to all organisations, which intend to improve their quality management system based on ISO 9001.

[Investigation on production process quality control of traditional Chinese medicine--Banlangen granule as an example].

PubMed

Tan, Manrong; Yan, Dan; Qiu, Lingling; Chen, Longhu; Yan, Yan; Jin, Cheng; Li, Hanbing; Xiao, Xiaohe

2012-04-01

For the quality management system of herbal medicines, intermediate and finished products it exists the " short board" effect of methodologies. Based on the concept of process control, new strategies and new methods of the production process quality control had been established with the consideration of the actual production of traditional Chinese medicine an the characteristics of Chinese medicine. Taking Banlangen granule as a practice example, which was effective and widespread application, character identification, determination of index components, chemical fingerprint and biometrics technology were sequentially used respectively to assess the quality of Banlangen herbal medicines, intermediate (water extraction and alcohol precipitation) and finished product. With the transfer rate of chemical information and biological potency as indicators, the effectiveness and transmission of the above different assessments and control methods had been researched. And ultimately, the process quality control methods of Banlangen granule, which were based on chemical composition analysis-biometric analysis, had been set up. It can not only validly solute the current status that there were many manufacturers varying quality of Banlangen granule, but also ensure and enhance its clinical efficacy. Furthermore it provided a foundation for the construction of the quality control of traditional Chinese medicine production process.

[Method for the quality assessment of data collection processes in epidemiological studies].

PubMed

Schöne, G; Damerow, S; Hölling, H; Houben, R; Gabrys, L

2017-10-01

For a quantitative evaluation of primary data collection processes in epidemiological surveys based on accompaniments and observations (in the field), there is no description of test criteria and methodologies in relevant literature and thus no known application in practice. Therefore, methods need to be developed and existing procedures adapted. The aim was to identify quality-relevant developments within quality dimensions by means of inspection points (quality indicators) during the process of data collection. As a result we seek to implement and establish a methodology for the assessment of overall survey quality supplementary to standardized data analyses. Monitors detect deviations from standard primary data collection during site visits by applying standardized checklists. Quantitative results - overall and for each dimension - are obtained by numerical calculation of quality indicators. Score results are categorized and color coded. This visual prioritization indicates necessity for intervention. The results obtained give clues regarding the current quality of data collection. This allows for the identification of such sections where interventions for quality improvement are needed. In addition, process quality development can be shown over time on an intercomparable basis. This methodology for the evaluation of data collection quality can identify deviations from norms, focalize quality analyses and help trace causes for significant deviations.

The Social Representations of Students on the Assessment of Universities' Quality: The Influence of Market- and Managerialism-Driven Discourse

ERIC Educational Resources Information Center

Cardoso, Sonia; Santiago, Rui; Sarrico, Claudia S.

2012-01-01

Although students are considered major actors in the quality assessment of universities, the way they perceive this process and the meanings they ascribe to it are still neglected as a research subject. This article aims to reduce this gap by focusing on the social representations of students on quality assessment. Specifically, it tries to…

Quality assessment of genetic counseling process in the context of presymptomatic testing for late-onset disorders: a thematic analysis of three review articles.

PubMed

Paneque, Milena; Sequeiros, Jorge; Skirton, Heather

2012-01-01

Presymptomatic testing (PST) is available for a range of late-onset disorders. Health practitioners generally follow guidelines regarding appropriate number of counseling sessions, involvement of multidisciplinary teams, topics for pretest discussion, and follow-up sessions; however, more understanding is needed about what helps consultands effectively and the impact of amount and quality of genetic counseling on the psychosocial sequelae of PST for late-onset disorders. We conducted a thematic analysis of three review articles on quality of the genetic counseling process, aiming at (1) exploring current evidence; (2) identifying quality assessment indicators; and (3) making recommendations for genetic counseling practice in late-onset disorders. We undertook a systematic search of 6 relevant databases: 38 articles were identified and 3 fitted our inclusion criteria; after quality appraisal, all were included in the review. The number of sessions, time spent, consultation environment, follow-up, and multidisciplinarity were identified as variables for quality assessment. Research on counseling in the context of genetic testing in familial cancer tends to be related to outcomes and indicators for quality assessment, while research concerning other late-onset diseases is mainly focused on the psychological impact of the test results. The quality and content of the overall process in noncancer late-onset diseases is insufficiently articulated. Despite the fact that PST for Huntington disease and other degenerative conditions has been offered for more than 20 years, good methodological approaches to assess quality of genetic counseling in that context remain elusive. This restricts improvement of the protocols for genetic services and, in general, healthcare for the at-risk population.

Guidance on Data Quality Assessment for Life Cycle Inventory ...

EPA Pesticide Factsheets

Data quality within Life Cycle Assessment (LCA) is a significant issue for the future support and development of LCA as a decision support tool and its wider adoption within industry. In response to current data quality standards such as the ISO 14000 series, various entities within the LCA community have developed different methodologies to address and communicate the data quality of Life Cycle Inventory (LCI) data. Despite advances in this field, the LCA community is still plagued by the lack of reproducible data quality results and documentation. To address these issues, US EPA has created this guidance in order to further support reproducible life cycle inventory data quality results and to inform users of the proper application of the US EPA supported data quality system. The work for this report was begun in December 2014 and completed as of April 2016.The updated data quality system includes a novel approach to the pedigree matrix by addressing data quality at the flow and the process level. Flow level indicators address source reliability, temporal correlation, geographic correlation, technological correlation and data sampling methods. The process level indicators address the level of review the unit process has undergone and its completeness. This guidance is designed to be updatable as part of the LCA Research Center’s continuing commitment to data quality advancements. Life cycle assessment is increasingly being used as a tool to identify areas of

Guidelines for Risk-Based Changeover of Biopharma Multi-Product Facilities.

PubMed

Lynch, Rob; Barabani, David; Bellorado, Kathy; Canisius, Peter; Heathcote, Doug; Johnson, Alan; Wyman, Ned; Parry, Derek Willison

2018-01-01

In multi-product biopharma facilities, the protection from product contamination due to the manufacture of multiple products simultaneously is paramount to assure product quality. To that end, the use of traditional changeover methods (elastomer change-out, full sampling, etc.) have been widely used within the industry and have been accepted by regulatory agencies. However, with the endorsement of Quality Risk Management (1), the use of risk-based approaches may be applied to assess and continuously improve established changeover processes. All processes, including changeover, can be improved with investment (money/resources), parallel activities, equipment design improvements, and standardization. However, processes can also be improved by eliminating waste. For product changeover, waste is any activity not needed for the new process or that does not provide added assurance of the quality of the subsequent product. The application of a risk-based approach to changeover aligns with the principles of Quality Risk Management. Through the use of risk assessments, the appropriate changeover controls can be identified and controlled to assure product quality is maintained. Likewise, the use of risk assessments and risk-based approaches may be used to improve operational efficiency, reduce waste, and permit concurrent manufacturing of products. © PDA, Inc. 2018.

Quality Assessment of College Admissions Processes.

ERIC Educational Resources Information Center

Fisher, Caroline; Weymann, Elizabeth; Todd, Amy

2000-01-01

This study evaluated the admissions process for a Master's in Business Administration Program using such quality improvement techniques as customer surveys, benchmarking, and gap analysis. Analysis revealed that student dissatisfaction with the admissions process may be a factor influencing declining enrollment. Cycle time and number of student…

Quality, management, and the interplay of self-assessment, process assessments, and performance-based observations

NASA Astrophysics Data System (ADS)

Willett, D. J.

1993-04-01

In this document, the author presents his observations on the topic of quality assurance (QA). Traditionally the focus of quality management has been on QA organizations, manuals, procedures, audits, and assessments; quality was measured by the degree of conformance to specifications or standards. Today quality is defined as satisfying user needs and is measured by user satisfaction. The author proposes that quality is the responsibility of line organizations and staff and not the responsibility of the QA group. This work outlines an effective Conduct of Operations program. The author concludes his observations with a discussion of how quality is analogous to leadership.

Field guide for collecting and processing stream-water samples for the National Water-Quality Assessment Program

USGS Publications Warehouse

Shelton, Larry R.

1994-01-01

The U.S. Geological Survey's National Water-Quality Assessment program includes extensive data- collection efforts to assess the quality of the Nations's streams. These studies require analyses of stream samples for major ions, nutrients, sediments, and organic contaminants. For the information to be comparable among studies in different parts of the Nation, consistent procedures specifically designed to produce uncontaminated samples for trace analysis in the laboratory are critical. This field guide describes the standard procedures for collecting and processing samples for major ions, nutrients, organic contaminants, sediment, and field analyses of conductivity, pH, alkalinity, and dissolved oxygen. Samples are collected and processed using modified and newly designed equipment made of Teflon to avoid contamination, including nonmetallic samplers (D-77 and DH-81) and a Teflon sample splitter. Field solid-phase extraction procedures developed to process samples for organic constituent analyses produce an extracted sample with stabilized compounds for more accurate results. Improvements to standard operational procedures include the use of processing chambers and capsule filtering systems. A modified collecting and processing procedure for organic carbon is designed to avoid contamination from equipment cleaned with methanol. Quality assurance is maintained by strict collecting and processing procedures, replicate sampling, equipment blank samples, and a rigid cleaning procedure using detergent, hydrochloric acid, and methanol.

Quality indicators for hip fracture care, a systematic review.

PubMed

Voeten, S C; Krijnen, P; Voeten, D M; Hegeman, J H; Wouters, M W J M; Schipper, I B

2018-05-17

Quality indicators are used to measure quality of care and enable benchmarking. An overview of all existing hip fracture quality indicators is lacking. The primary aim was to identify quality indicators for hip fracture care reported in literature, hip fracture audits, and guidelines. The secondary aim was to compose a set of methodologically sound quality indicators for the evaluation of hip fracture care in clinical practice. A literature search according to the PRISMA guidelines and an internet search were performed to identify hip fracture quality indicators. The indicators were subdivided into process, structure, and outcome indicators. The methodological quality of the indicators was judged using the Appraisal of Indicators through Research and Evaluation (AIRE) instrument. For structure and process indicators, the construct validity was assessed. Sixteen publications, nine audits and five guidelines were included. In total, 97 unique quality indicators were found: 9 structure, 63 process, and 25 outcome indicators. Since detailed methodological information about the indicators was lacking, the AIRE instrument could not be applied. Seven indicators correlated with an outcome measure. A set of nine quality indicators was extracted from the literature, audits, and guidelines. Many quality indicators are described and used. Not all of them correlate with outcomes of care and have been assessed methodologically. As methodological evidence is lacking, we recommend the extracted set of nine indicators to be used as the starting point for further clinical research. Future research should focus on assessing the clinimetric properties of the existing quality indicators.

Assessment Moderation in an Australian Context: Processes, Practices, and Challenges

ERIC Educational Resources Information Center

Beutel, Denise; Adie, Lenore; Lloyd, Margaret

2017-01-01

Moderation is a quality assurance process that plays a central role in the teaching, learning, and assessment cycle in higher education. While there is a growing body of research globally on teaching, learning, and, to a lesser degree, assessment in higher education, the process of moderation of assessment has received even less attention. In a…

Total Quality Management (TQM), an Overview

DTIC Science & Technology

1991-09-01

Quality Management (TQM). It discusses the reasons TQM is a current growth industry, what it is, and how one implements it. It describes the basic analytical tools, statistical process control, some advanced analytical tools, tools used by process improvement teams to enhance their own operations, and action plans for making improvements. The final sections discuss assessing quality efforts and measuring the quality to knowledge

Assessment of shrimp farming impact on groundwater quality using analytical hierarchy process

NASA Astrophysics Data System (ADS)

Anggie, Bernadietta; Subiyanto, Arief, Ulfah Mediaty; Djuniadi

2018-03-01

Improved shrimp farming affects the groundwater quality conditions. Assessment of shrimp farming impact on groundwater quality conventionally has less accuracy. This paper presents the implementation of Analytical Hierarchy Process (AHP) method for assessing shrimp farming impact on groundwater quality. The data used is the impact data of shrimp farming in one of the regions in Indonesia from 2006-2016. Criteria used in this study were 8 criteria and divided into 49 sub-criteria. The weighting by AHP performed to determine the importance level of criteria and sub-criteria. Final priority class of shrimp farming impact were obtained from the calculation of criteria's and sub-criteria's weights. The validation was done by comparing priority class of shrimp farming impact and water quality conditions. The result show that 50% of the total area was moderate priority class, 37% was low priority class and 13% was high priority class. From the validation result impact assessment for shrimp farming has been high accuracy to the groundwater quality conditions. This study shows that assessment based on AHP has a higher accuracy to shrimp farming impact and can be used as the basic fisheries planning to deal with impacts that have been generated.

PHYTOASSESSMENT OF ESTUARINE SEDIMENTS

EPA Science Inventory

Most sediment quality assessments and quality guidelines are based on the laboratory response of single animal species and benthic animal community composition. The role of plants in this hazard assessment process is poorly understood despite the fact that plant-dominated habitat...

Quality Assessment in the Blog Space

ERIC Educational Resources Information Center

Schaal, Markus; Fidan, Guven; Muller, Roland M.; Dagli, Orhan

2010-01-01

Purpose: The purpose of this paper is the presentation of a new method for blog quality assessment. The method uses the temporal sequence of link creation events between blogs as an implicit source for the collective tacit knowledge of blog authors about blog quality. Design/methodology/approach: The blog data are processed by the novel method for…

An Assessment of an Operational Educational Accountability System for Continuing Education in the Health Professions.

ERIC Educational Resources Information Center

Walsh, Patrick L.

1982-01-01

The Educational Quality Assessment and Assurance System for continuing education in health sciences includes three components to measure inputs, processes, and outcomes. They are (1) Program Coordinator Competency List, (2) Quality Assessment and Assurance Program, and (3) evaluation of educational programs. (SK)

Mind the Gap: An Analysis of How Quality Assurance Processes Influence Programme Assessment Patterns

ERIC Educational Resources Information Center

Jessop, Tansy; McNab, Nicole; Gubby, Laura

2012-01-01

This article explores the relationship between the lack of visible attention to formative assessment in degree specifications and its marginalization in practice. Degree specification documents form part of the quality apparatus emphasizing the accountability and certification duties of assessment. Ironically, a framework designed to assure…

Assessment of motor and process skills: assessing client work performance in Belgium.

PubMed

Vandamme, Dirk

2010-01-01

The aim of this study is to establish whether the Assessment of Motor and Process Skills (AMPS) is an appropriate tool to evaluate the quality of work performance by comparing clients' results on the AMPS with the quality of the skills that they demonstrate on the shop floor. A convenience sample of chronically unemployed (vocationally disabled) participants (N=139) with no formal training who were seeking unskilled work through Jobcentrum West-Vlaanderen (West Flanders Job Centre, Belgium) was used. Results demonstrated that in 75.2% of cases the prediction of employment outcome was correct; it is suggested that an AMPS motor score < 2.5 and a process score < 1.2 is insufficient for regular employment, while a motor score > 3.1 and process score > 1.5 indicates that regular employment is a realistic goal. The quality of the motor skills measured by the AMPS and measured on the shop floor are comparable, but little similarity was found in the measurement of process skills.

Application of the quality by design approach to the drug substance manufacturing process of an Fc fusion protein: towards a global multi-step design space.

PubMed

Eon-duval, Alex; Valax, Pascal; Solacroup, Thomas; Broly, Hervé; Gleixner, Ralf; Strat, Claire L E; Sutter, James

2012-10-01

The article describes how Quality by Design principles can be applied to the drug substance manufacturing process of an Fc fusion protein. First, the quality attributes of the product were evaluated for their potential impact on safety and efficacy using risk management tools. Similarly, process parameters that have a potential impact on critical quality attributes (CQAs) were also identified through a risk assessment. Critical process parameters were then evaluated for their impact on CQAs, individually and in interaction with each other, using multivariate design of experiment techniques during the process characterisation phase. The global multi-step Design Space, defining operational limits for the entire drug substance manufacturing process so as to ensure that the drug substance quality targets are met, was devised using predictive statistical models developed during the characterisation study. The validity of the global multi-step Design Space was then confirmed by performing the entire process, from cell bank thawing to final drug substance, at its limits during the robustness study: the quality of the final drug substance produced under different conditions was verified against predefined targets. An adaptive strategy was devised whereby the Design Space can be adjusted to the quality of the input material to ensure reliable drug substance quality. Finally, all the data obtained during the process described above, together with data generated during additional validation studies as well as manufacturing data, were used to define the control strategy for the drug substance manufacturing process using a risk assessment methodology. Copyright © 2012 Wiley-Liss, Inc.

Study protocol: using the Q-STEPS to assess and improve the quality of physical activity programmes for the elderly.

PubMed

Marques, Ana I; Rosa, Maria J; Amorim, Marlene; Soares, Pedro; Oliveira-Tavares, António; Santos, Rute; Mota, Jorge; Carvalho, Joana

2012-07-09

Aging is one of the most important and obvious phenomenon observed in our society. In the past years, there has been a growing concern in designing physical activity (PA) programmes for elderly people, because evidence suggests that such health promotion interventions may reduce the deleterious effects of the ageing process. Accordingly, a growing body of literature points to the importance of a sound approach to planning and evaluation in order to improve the quality of PA programmes. However, while numerous PA programmes have been designed for the elderly in recent years, their evaluation has been scarce. Quality management processes and tools provide a practical way for organisations to assess, identify and shed light on the areas requiring improvement. The Quality Self-assessment Tool for Exercise Programmes for Seniors (Q-STEPS) seems to provide a framework tailored to evaluate PA programmes for the elderly. The primary purpose of this study is 1) to determine feasibility, acceptability and usability of the Q-STEPS. Secondary purposes of the study are: 2) to examine the quality of the PA programmes for elderly people developed by the Portuguese Local Administration over a three-year period of self-assessments in terms of: a) Enabler domains (Leadership, Policy and Strategy, People, Partnership and Resources, Processes); b) Result domains (Customer Results, People Results, Society Results and Key Performance Results); 3) to estimate the association between the use of Q-STEPS and some indicators relating to the elderly participants, during the three self-assessments, such as: attendance rates, physical fitness, health-related quality of life and the elderly's perceived quality of the programme. The study will be conducted in PA programmes for elderly adults from mainland Portuguese municipalities over a three-year period. The project will adopt a participative quality improvement approach that features annual learning cycles of: 1) self-assessment with the Q-STEPS; 2) feedback to and interpretation of results involving programme's staff; 3) action planning to achieve system changes; 4) implementation of strategies for change; and 5) review process through further self-assessment. The study will collect a range of process and outcome data that will be used to achieve the research aims. It is our understanding that the results of the Q-STEPS study will contribute directly to the evidence based on effectiveness of continuous quality improvement approaches, in order to improve customer satisfaction and adherence to PA programmes targeting the ageing population. This comprehensive evaluation will also add significant new knowledge regarding the characteristics associated with a sustainable public service.

A new approach to subjectively assess quality of plenoptic content

NASA Astrophysics Data System (ADS)

Viola, Irene; Řeřábek, Martin; Ebrahimi, Touradj

2016-09-01

Plenoptic content is becoming increasingly popular thanks to the availability of acquisition and display devices. Thanks to image-based rendering techniques, a plenoptic content can be rendered in real time in an interactive manner allowing virtual navigation through the captured scenes. This way of content consumption enables new experiences, and therefore introduces several challenges in terms of plenoptic data processing, transmission and consequently visual quality evaluation. In this paper, we propose a new methodology to subjectively assess the visual quality of plenoptic content. We also introduce a prototype software to perform subjective quality assessment according to the proposed methodology. The proposed methodology is further applied to assess the visual quality of a light field compression algorithm. Results show that this methodology can be successfully used to assess the visual quality of plenoptic content.

Benchmarking performance: Environmental impact statements in Egypt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badr, El-Sayed A., E-mail: ebadr@mans.edu.e; Zahran, Ashraf A., E-mail: ashraf_zahran@yahoo.co; Cashmore, Matthew, E-mail: m.cashmore@uea.ac.u

Environmental impact assessment (EIA) was formally introduced in Egypt in 1994. This short paper evaluates 'how well' the EIA process is working in practice in Egypt, by reviewing the quality of 45 environmental impact statements (EISs) produced between 2000 and 2007 for a variety of project types. The Lee and Colley review package was used to assess the quality of the selected EISs. About 69% of the EISs sampled were found to be of a satisfactory quality. An assessment of the performance of different elements of the EIA process indicates that descriptive tasks tend to be performed better than scientificmore » tasks. The quality of core elements of EIA (e.g., impact prediction, significance evaluation, scoping and consideration of alternatives) appears to be particularly problematic. Variables that influence the quality of EISs are identified and a number of broad recommendations are made for improving the effectiveness of the EIA system.« less

The quality of clinical maternal and neonatal healthcare - a strategy for identifying 'routine care signal functions'.

PubMed

Brenner, Stephan; De Allegri, Manuela; Gabrysch, Sabine; Chinkhumba, Jobiba; Sarker, Malabika; Muula, Adamson S

2015-01-01

A variety of clinical process indicators exists to measure the quality of care provided by maternal and neonatal health (MNH) programs. To allow comparison across MNH programs in low- and middle-income countries (LMICs), a core set of essential process indicators is needed. Although such a core set is available for emergency obstetric care (EmOC), the 'EmOC signal functions', a similar approach is currently missing for MNH routine care evaluation. We describe a strategy for identifying core process indicators for routine care and illustrate their usefulness in a field example. We first developed an indicator selection strategy by combining epidemiological and programmatic aspects relevant to MNH in LMICs. We then identified routine care process indicators meeting our selection criteria by reviewing existing quality of care assessment protocols. We grouped these indicators into three categories based on their main function in addressing risk factors of maternal or neonatal complications. We then tested this indicator set in a study assessing MNH quality of clinical care in 33 health facilities in Malawi. Our strategy identified 51 routine care processes: 23 related to initial patient risk assessment, 17 to risk monitoring, 11 to risk prevention. During the clinical performance assessment a total of 82 cases were observed. Birth attendants' adherence to clinical standards was lowest in relation to risk monitoring processes. In relation to major complications, routine care processes addressing fetal and newborn distress were performed relatively consistently, but there were major gaps in the performance of routine care processes addressing bleeding, infection, and pre-eclampsia risks. The identified set of process indicators could identify major gaps in the quality of obstetric and neonatal care provided during the intra- and immediate postpartum period. We hope our suggested indicators for essential routine care processes will contribute to streamlining MNH program evaluations in LMICs.

The Quality of Clinical Maternal and Neonatal Healthcare – A Strategy for Identifying ‘Routine Care Signal Functions’

PubMed Central

Brenner, Stephan; De Allegri, Manuela; Gabrysch, Sabine; Chinkhumba, Jobiba; Sarker, Malabika; Muula, Adamson S.

2015-01-01

Background A variety of clinical process indicators exists to measure the quality of care provided by maternal and neonatal health (MNH) programs. To allow comparison across MNH programs in low- and middle-income countries (LMICs), a core set of essential process indicators is needed. Although such a core set is available for emergency obstetric care (EmOC), the ‘EmOC signal functions’, a similar approach is currently missing for MNH routine care evaluation. We describe a strategy for identifying core process indicators for routine care and illustrate their usefulness in a field example. Methods We first developed an indicator selection strategy by combining epidemiological and programmatic aspects relevant to MNH in LMICs. We then identified routine care process indicators meeting our selection criteria by reviewing existing quality of care assessment protocols. We grouped these indicators into three categories based on their main function in addressing risk factors of maternal or neonatal complications. We then tested this indicator set in a study assessing MNH quality of clinical care in 33 health facilities in Malawi. Results Our strategy identified 51 routine care processes: 23 related to initial patient risk assessment, 17 to risk monitoring, 11 to risk prevention. During the clinical performance assessment a total of 82 cases were observed. Birth attendants’ adherence to clinical standards was lowest in relation to risk monitoring processes. In relation to major complications, routine care processes addressing fetal and newborn distress were performed relatively consistently, but there were major gaps in the performance of routine care processes addressing bleeding, infection, and pre-eclampsia risks. Conclusion The identified set of process indicators could identify major gaps in the quality of obstetric and neonatal care provided during the intra- and immediate postpartum period. We hope our suggested indicators for essential routine care processes will contribute to streamlining MNH program evaluations in LMICs. PMID:25875252

The quality of instruments to assess the process of shared decision making: A systematic review

PubMed Central

Bomhof-Roordink, Hanna; Smith, Ian P.; Scholl, Isabelle; Stiggelbout, Anne M.; Pieterse, Arwen H.

2018-01-01

Objective To inventory instruments assessing the process of shared decision making and appraise their measurement quality, taking into account the methodological quality of their validation studies. Methods In a systematic review we searched seven databases (PubMed, Embase, Emcare, Cochrane, PsycINFO, Web of Science, Academic Search Premier) for studies investigating instruments measuring the process of shared decision making. Per identified instrument, we assessed the level of evidence separately for 10 measurement properties following a three-step procedure: 1) appraisal of the methodological quality using the COnsensus-based Standards for the selection of health status Measurement INstruments (COSMIN) checklist, 2) appraisal of the psychometric quality of the measurement property using three possible quality scores, 3) best-evidence synthesis based on the number of studies, their methodological and psychometrical quality, and the direction and consistency of the results. The study protocol was registered at PROSPERO: CRD42015023397. Results We included 51 articles describing the development and/or evaluation of 40 shared decision-making process instruments: 16 patient questionnaires, 4 provider questionnaires, 18 coding schemes and 2 instruments measuring multiple perspectives. There is an overall lack of evidence for their measurement quality, either because validation is missing or methods are poor. The best-evidence synthesis indicated positive results for a major part of instruments for content validity (50%) and structural validity (53%) if these were evaluated, but negative results for a major part of instruments when inter-rater reliability (47%) and hypotheses testing (59%) were evaluated. Conclusions Due to the lack of evidence on measurement quality, the choice for the most appropriate instrument can best be based on the instrument’s content and characteristics such as the perspective that they assess. We recommend refinement and validation of existing instruments, and the use of COSMIN-guidelines to help guarantee high-quality evaluations. PMID:29447193

Learning Contexts for Young Children in Chile: Process Quality Assessment in Preschool Centres

ERIC Educational Resources Information Center

Herrera, Maria Olivia; Mathiesen, Maria Elena; Merino, Jose Manuel; Recart, Isidora

2005-01-01

ITERS (Infant and Toddler Environment Rating Scale), ECERS (Early Childhood Environment Rating Scale) and SACERS (School Age Care Environment Rating Scale) are used to measure process quality. The psychometric characteristics of the three scales are established, and high reliability and adequate validity are observed. The global quality process…

RNA quality in fresh-frozen gastrointestinal tumor specimens-experiences from the tumor and healthy tissue bank TU Dresden.

PubMed

Zeugner, Silke; Mayr, Thomas; Zietz, Christian; Aust, Daniela E; Baretton, Gustavo B

2015-01-01

The term "pre-analytics" summarizes all procedures concerned with specimen collection or processing as well as logistical aspects like transport or storage of tissue specimens. All or these variables as well as tissue-specific characteristics affect sample quality. While certain parameters like warm ischemia or tissue-specific characteristics cannot be changed, other parameters can be assessed and optimized. The aim of this study was to determine RNA quality by assessing the RIN values of specimens from different organs and to assess the influence of vacuum preservation. Samples from the GI tract, in general, appear to have lower RNA quality when compared to samples from other organ sites. This may be due to the digestive enzymes or bacterial colonization. Processing time in pathology does not significantly influence RNA quality. Tissue preservation with a vacuum sealer leads to preserved RNA quality over an extended period of time and offers a feasible alternative to minimize the influence of transport time into pathology.

[Quality control an assessment system. Its location within a program for food, nutrition and metabolic intervention].

PubMed

Santana Porbén, S

2012-01-01

A design proposal for a HQCAS Hospital Quality Control and Assessment System of the nutritional and feeding care processes conducted in a hospital environment is presented in this article. The design proposal is accompanied of the results of inspections conducted by the hospital NST Nutritional Support Group between 2005-2010. The system design includes quality policies that should rule the useful and safe conduction of such processes, the recording and documentary foundations of the System, and the quality control and assessment exercises for the continuous verification of such established policies. The current state of the conduction of these processes was documented from secondary records opened by the NST after satisfying consultation requests from the medical care teams of the institution. Inspections conducted by the NST revealed that less than half of clinical charts contained information minimally enough for elaborating nutritional judgments, almost one-fifth of the assisted patients were on Nils Per Oris, for whom no nutritional support schemes were prescribed, and a low prescription and usage of artificial nutrition schemes. Corrective measures adopted by the NST served to significantly increase the rates of successful completion of inspected processes. Quality assurance of feeding and nutritional care processes is a practical as well as an intellectual activity subjected to constant remodeling, in order to always warrant the fulfillment of quality policies advanced by the NST, and thus, that the patient benefits from the prescribed nutritional intervention strategy.

42 CFR 431.806 - State plan requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... processing assessment system. Except in a State that has an approved Medicaid Management Information System... Medicaid quality control claims processing assessment system that meets the requirements of §§ 431.830...

Peer Assessment: Judging the Quality of Students' Work by Comments Rather than Marks

ERIC Educational Resources Information Center

Davies, Phil

2006-01-01

This paper reports the results of a study into the quality of peer feedback provided by students within a computerised peer-assessment environment. The study looks at the creation of a "feedback index" that represents the quality of an essay based upon the feedback provided during a peer-marking process and identifies a significant…

Individual Differences in Study Processes and the Quality of Learning Outcomes.

ERIC Educational Resources Information Center

Biggs, John

1979-01-01

The relationship between students' study processes and the structural complexity of their learning is examined. Study processes are viewed in terms of three dimensions and are assessed by a questionnaire. Learning quality is expressed in levels of a taxonomy. A study that relates taxonomic levels and retention to study processes is reported.…

Notification: Evaluation of EPA’s Approval Process for Air Quality Dispersion Models

EPA Pesticide Factsheets

Project #OPE-FY17-0016, June 5, 2017. The EPA OIG plans to begin preliminary research to assess the effectiveness of EPA's process for reviewing and approving air quality dispersion models it recommends for use.

Record of Assessment Moderation Practice (RAMP): Survey Software as a Mechanism of Continuous Quality Improvement

ERIC Educational Resources Information Center

Johnson, Genevieve Marie

2015-01-01

In higher education, assessment integrity is pivotal to student learning and satisfaction, and, therefore, a particularly important target of continuous quality improvement. This paper reports on the preliminary development and application of a process of recording and analysing current assessment moderation practices, with the aim of identifying…

Pharmaceutical quality by design: product and process development, understanding, and control.

PubMed

Yu, Lawrence X

2008-04-01

The purpose of this paper is to discuss the pharmaceutical Quality by Design (QbD) and describe how it can be used to ensure pharmaceutical quality. The QbD was described and some of its elements identified. Process parameters and quality attributes were identified for each unit operation during manufacture of solid oral dosage forms. The use of QbD was contrasted with the evaluation of product quality by testing alone. The QbD is a systemic approach to pharmaceutical development. It means designing and developing formulations and manufacturing processes to ensure predefined product quality. Some of the QbD elements include: Defining target product quality profile; Designing product and manufacturing processes; Identifying critical quality attributes, process parameters, and sources of variability; Controlling manufacturing processes to produce consistent quality over time. Using QbD, pharmaceutical quality is assured by understanding and controlling formulation and manufacturing variables. Product testing confirms the product quality. Implementation of QbD will enable transformation of the chemistry, manufacturing, and controls (CMC) review of abbreviated new drug applications (ANDAs) into a science-based pharmaceutical quality assessment.

Assessment of the Quality of Digital Terrain Model Produced from Unmanned Aerial System Imagery

NASA Astrophysics Data System (ADS)

Kosmatin Fras, M.; Kerin, A.; Mesarič, M.; Peterman, V.; Grigillo, D.

2016-06-01

Production of digital terrain model (DTM) is one of the most usual tasks when processing photogrammetric point cloud generated from Unmanned Aerial System (UAS) imagery. The quality of the DTM produced in this way depends on different factors: the quality of imagery, image orientation and camera calibration, point cloud filtering, interpolation methods etc. However, the assessment of the real quality of DTM is very important for its further use and applications. In this paper we first describe the main steps of UAS imagery acquisition and processing based on practical test field survey and data. The main focus of this paper is to present the approach to DTM quality assessment and to give a practical example on the test field data. For data processing and DTM quality assessment presented in this paper mainly the in-house developed computer programs have been used. The quality of DTM comprises its accuracy, density, and completeness. Different accuracy measures like RMSE, median, normalized median absolute deviation and their confidence interval, quantiles are computed. The completeness of the DTM is very often overlooked quality parameter, but when DTM is produced from the point cloud this should not be neglected as some areas might be very sparsely covered by points. The original density is presented with density plot or map. The completeness is presented by the map of point density and the map of distances between grid points and terrain points. The results in the test area show great potential of the DTM produced from UAS imagery, in the sense of detailed representation of the terrain as well as good height accuracy.

Exploring Systems That Support Good Clinical Care in Indigenous Primary Health-care Services: A Retrospective Analysis of Longitudinal Systems Assessment Tool Data from High-Improving Services.

PubMed

Woods, Cindy; Carlisle, Karen; Larkins, Sarah; Thompson, Sandra Claire; Tsey, Komla; Matthews, Veronica; Bailie, Ross

2017-01-01

Continuous Quality Improvement is a process for raising the quality of primary health care (PHC) across Indigenous PHC services. In addition to clinical auditing using plan, do, study, and act cycles, engaging staff in a process of reflecting on systems to support quality care is vital. The One21seventy Systems Assessment Tool (SAT) supports staff to assess systems performance in terms of five key components. This study examines quantitative and qualitative SAT data from five high-improving Indigenous PHC services in northern Australia to understand the systems used to support quality care. High-improving services selected for the study were determined by calculating quality of care indices for Indigenous health services participating in the Audit and Best Practice in Chronic Disease National Research Partnership. Services that reported continuing high improvement in quality of care delivered across two or more audit tools in three or more audits were selected for the study. Precollected SAT data (from annual team SAT meetings) are presented longitudinally using radar plots for quantitative scores for each component, and content analysis is used to describe strengths and weaknesses of performance in each systems' component. High-improving services were able to demonstrate strong processes for assessing system performance and consistent improvement in systems to support quality care across components. Key strengths in the quality support systems included adequate and orientated workforce, appropriate health system supports, and engagement with other organizations and community, while the weaknesses included lack of service infrastructure, recruitment, retention, and support for staff and additional costs. Qualitative data revealed clear voices from health service staff expressing concerns with performance, and subsequent SAT data provided evidence of changes made to address concerns. Learning from the processes and strengths of high-improving services may be useful as we work with services striving to improve the quality of care provided in other areas.

Predicting non-stationary algal dynamics following changes in hydrometeorological conditions using data assimilation techniques

NASA Astrophysics Data System (ADS)

Kim, S.; Seo, D. J.

2017-12-01

When water temperature (TW) increases due to changes in hydrometeorological conditions, the overall ecological conditions change in the aquatic system. The changes can be harmful to human health and potentially fatal to fish habitat. Therefore, it is important to assess the impacts of thermal disturbances on in-stream processes of water quality variables and be able to predict effectiveness of possible actions that may be taken for water quality protection. For skillful prediction of in-stream water quality processes, it is necessary for the watershed water quality models to be able to reflect such changes. Most of the currently available models, however, assume static parameters for the biophysiochemical processes and hence are not able to capture nonstationaries seen in water quality observations. In this work, we assess the performance of the Hydrological Simulation Program-Fortran (HSPF) in predicting algal dynamics following TW increase. The study area is located in the Republic of Korea where waterway change due to weir construction and drought concurrently occurred around 2012. In this work we use data assimilation (DA) techniques to update model parameters as well as the initial condition of selected state variables for in-stream processes relevant to algal growth. For assessment of model performance and characterization of temporal variability, various goodness-of-fit measures and wavelet analysis are used.

Development and Validation of an Index to Measure the Quality of Facility-Based Labor and Delivery Care Processes in Sub-Saharan Africa

PubMed Central

Tripathi, Vandana; Stanton, Cynthia; Strobino, Donna; Bartlett, Linda

2015-01-01

Background High quality care is crucial in ensuring that women and newborns receive interventions that may prevent and treat birth-related complications. As facility deliveries increase in developing countries, there are concerns about service quality. Observation is the gold standard for clinical quality assessment, but existing observation-based measures of obstetric quality of care are lengthy and difficult to administer. There is a lack of consensus on quality indicators for routine intrapartum and immediate postpartum care, including essential newborn care. This study identified key dimensions of the quality of the process of intrapartum and immediate postpartum care (QoPIIPC) in facility deliveries and developed a quality assessment measure representing these dimensions. Methods and Findings Global maternal and neonatal care experts identified key dimensions of QoPIIPC through a modified Delphi process. Experts also rated indicators of these dimensions from a comprehensive delivery observation checklist used in quality surveys in sub-Saharan African countries. Potential QoPIIPC indices were developed from combinations of highly-rated indicators. Face, content, and criterion validation of these indices was conducted using data from observations of 1,145 deliveries in Kenya, Madagascar, and Tanzania (including Zanzibar). A best-performing index was selected, composed of 20 indicators of intrapartum/immediate postpartum care, including essential newborn care. This index represented most dimensions of QoPIIPC and effectively discriminated between poorly and well-performed deliveries. Conclusions As facility deliveries increase and the global community pays greater attention to the role of care quality in achieving further maternal and newborn mortality reduction, the QoPIIPC index may be a valuable measure. This index complements and addresses gaps in currently used quality assessment tools. Further evaluation of index usability and reliability is needed. The availability of a streamlined, comprehensive, and validated index may enable ongoing and efficient observation-based assessment of care quality during labor and delivery in sub-Saharan Africa, facilitating targeted quality improvement. PMID:26107655

Evaluating Quality of Decision-Making Processes in Medicines' Development, Regulatory Review, and Health Technology Assessment: A Systematic Review of the Literature.

PubMed

Bujar, Magdalena; McAuslane, Neil; Walker, Stuart R; Salek, Sam

2017-01-01

Introduction: Although pharmaceutical companies, regulatory authorities, and health technology assessment (HTA) agencies have been increasingly using decision-making frameworks, it is not certain whether these enable better quality decision making. This could be addressed by formally evaluating the quality of decision-making process within those organizations. The aim of this literature review was to identify current techniques (tools, questionnaires, surveys, and studies) for measuring the quality of the decision-making process across the three stakeholders. Methods: Using MEDLINE, Web of Knowledge, and other Internet-based search engines, a literature review was performed to systematically identify techniques for assessing quality of decision making in medicines development, regulatory review, and HTA. A structured search was applied using key words and a secondary review was carried out. In addition, the measurement properties of each technique were assessed and compared. Ten Quality Decision-Making Practices (QDMPs) developed previously were then used as a framework for the evaluation of techniques identified in the review. Due to the variation in studies identified, meta-analysis was inappropriate. Results: This review identified 13 techniques, where 7 were developed specifically to assess decision making in medicines' development, regulatory review, or HTA; 2 examined corporate decision making, and 4 general decision making. Regarding how closely each technique conformed to the 10 QDMPs, the 13 techniques assessed a median of 6 QDMPs, with a mode of 3 QDMPs. Only 2 techniques evaluated all 10 QDMPs, namely the Organizational IQ and the Quality of Decision Making Orientation Scheme (QoDoS), of which only one technique, QoDoS could be applied to assess decision making of both individuals and organizations, and it possessed generalizability to capture issues relevant to companies as well as regulatory authorities. Conclusion: This review confirmed a general paucity of research in this area, particularly regarding the development and systematic application of techniques for evaluating quality decision making, with no consensus around a gold standard. This review has identified QoDoS as the most promising available technique for assessing decision making in the lifecycle of medicines and the next steps would be to further test its validity, sensitivity, and reliability.

Accreditation and quality approach in operating theatre departments: the French approach.

PubMed

Soudée, M

2005-01-01

Since 1996, French health establishments are subjected to a process of evaluating the quality of care, called "accreditation". This process was controlled by ANAES, which, after January 1st, 2005 became the Haute Autorité de Santé (HAS). The accreditation is characterized by a dual process of self-assessment and external audit, leading to four levels of accreditation. In spite of requiring a time-consuming methodology, this approach provides an important means of consolidating the development of the quality approach and re-stimulating the compliance of establishments with standards of safety and vigilance. The professional teams of many French operating theatre departments have been able to use the regulatory and restricting framework of accreditation to organize quality approaches specific to the operative system, supported by the organizational structures of the department such as the operating suite committee, departmental boards and the steering group. Based on quality guidelines including a commitment from the manager and operating suite committee, as well as a quality flow chart and a quality system, these teams describe the main procedures for running the operating theatre. They also organize the follow-up of incidents and undesirable events, along with the risks and points to watch. Audits of the operative system are planned on a regular basis. The second version of the accreditation process considerably reinforces the assessment of professional practices by evaluating the relevance, the risks and the methods of managing care for pathologies. It will make it possible to implement assessments of the health care provided by operating theatre departments and will reinforce the importance of search for quality.

42 CFR 486.348 - Condition: Quality assessment and performance improvement (QAPI).

Code of Federal Regulations, 2010 CFR

2010-10-01

... improvement (QAPI). 486.348 Section 486.348 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT... Coverage: Organ Procurement Organizations Organ Procurement Organization Process Performance Measures § 486.348 Condition: Quality assessment and performance improvement (QAPI). The OPO must develop, implement...

[Quality assessment in anesthesia].

PubMed

Kupperwasser, B

1996-01-01

Quality assessment (assurance/improvement) is the set of methods used to measure and improve the delivered care and the department's performance against pre-established criteria or standards. The four stages of the self-maintained quality assessment cycle are: problem identification, problem analysis, problem correction and evaluation of corrective actions. Quality assessment is a measurable entity for which it is necessary to define and calibrate measurement parameters (indicators) from available data gathered from the hospital anaesthesia environment. Problem identification comes from the accumulation of indicators. There are four types of quality indicators: structure, process, outcome and sentinel indicators. The latter signal a quality defect, are independent of outcomes, are easier to analyse by statistical methods and closely related to processes and main targets of quality improvement. The three types of methods to analyse the problems (indicators) are: peer review, quantitative methods and risks management techniques. Peer review is performed by qualified anaesthesiologists. To improve its validity, the review process should be explicited and conclusions based on standards of practice and literature references. The quantitative methods are statistical analyses applied to the collected data and presented in a graphic format (histogram, Pareto diagram, control charts). The risks management techniques include: a) critical incident analysis establishing an objective relationship between a 'critical' event and the associated human behaviours; b) system accident analysis, based on the fact that accidents continue to occur despite safety systems and sophisticated technologies, checks of all the process components leading to the impredictable outcome and not just the human factors; c) cause-effect diagrams facilitate the problem analysis in reducing its causes to four fundamental components (persons, regulations, equipment, process). Definition and implementation of corrective measures, based on the findings of the two previous stages, are the third step of the evaluation cycle. The Hawthorne effect is an outcome improvement, before the implementation of any corrective actions. Verification of the implemented actions is the final and mandatory step closing the evaluation cycle.

Noise Estimation and Quality Assessment of Gaussian Noise Corrupted Images

NASA Astrophysics Data System (ADS)

Kamble, V. M.; Bhurchandi, K.

2018-03-01

Evaluating the exact quantity of noise present in an image and quality of an image in the absence of reference image is a challenging task. We propose a near perfect noise estimation method and a no reference image quality assessment method for images corrupted by Gaussian noise. The proposed methods obtain initial estimate of noise standard deviation present in an image using the median of wavelet transform coefficients and then obtains a near to exact estimate using curve fitting. The proposed noise estimation method provides the estimate of noise within average error of +/-4%. For quality assessment, this noise estimate is mapped to fit the Differential Mean Opinion Score (DMOS) using a nonlinear function. The proposed methods require minimum training and yields the noise estimate and image quality score. Images from Laboratory for image and Video Processing (LIVE) database and Computational Perception and Image Quality (CSIQ) database are used for validation of the proposed quality assessment method. Experimental results show that the performance of proposed quality assessment method is at par with the existing no reference image quality assessment metric for Gaussian noise corrupted images.

Patients' assessment of quality of care in public tertiary hospitals with and without accreditation: comparative cross-sectional study.

PubMed

Aboshaiqah, Ahmad E; Alonazi, Wadi B; Patalagsa, Joel Gonzales

2016-11-01

To compare patients' assessment of quality of care provided by public tertiary hospitals grouped according to accreditation status. Healthcare institutions worldwide are increasingly adopting accreditation as continuing initiative aimed at improving structures, processes and outcomes associated with quality of care. Patients being recipients of health care need to participate in assessing the quality of care they experienced while confined for therapeutic management. Comparative, cross-sectional. Data were collected from patients confined in public tertiary hospitals (n = 517 in four with accreditation and n = 542 in four without accreditation) in Riyadh, Saudi Arabia between February 2011-June 2011. Patients rated key performance indicators grouped under the dimensions of structure, process and outcome. Mann-Whitney U-test, Spearman Correlation Coefficient and coefficient of determination were used in analysing data. Patients in accredited public tertiary hospitals perceived structure, outcome and overall quality of care statistically higher than patients in non-accredited hospitals. No statistical differences were found in process (access and communication) indicators. Accreditation status is marginally associated with structure; outcome; and overall quality of care. The proportion of variance in the ranks of accreditation status explained the proportion of variance in the ranks of structure; outcome; and overall quality of care. The results apparently showed better structure, outcome and overall quality of care in accredited hospitals. Accreditation's association in the overall quality of care apparently remained unclear. Further studies are needed to appreciate the contribution of accreditation. © 2016 John Wiley & Sons Ltd.

Fostering evidence-based quality improvement for patient-centered medical homes: Initiating local quality councils to transform primary care.

PubMed

Stockdale, Susan E; Zuchowski, Jessica; Rubenstein, Lisa V; Sapir, Negar; Yano, Elizabeth M; Altman, Lisa; Fickel, Jacqueline J; McDougall, Skye; Dresselhaus, Timothy; Hamilton, Alison B

Although the patient-centered medical home endorses quality improvement principles, methods for supporting ongoing, systematic primary care quality improvement have not been evaluated. We introduced primary care quality councils at six Veterans Health Administration sites as an organizational intervention with three key design elements: (a) fostering interdisciplinary quality improvement leadership, (b) establishing a structured quality improvement process, and (c) facilitating organizationally aligned frontline quality improvement innovation. Our evaluation objectives were to (a) assess design element implementation, (b) describe implementation barriers and facilitators, and (c) assess successful quality improvement project completion and spread. We analyzed administrative records and conducted interviews with 85 organizational leaders. We developed and applied criteria for assessing design element implementation using hybrid deductive/inductive analytic techniques. All quality councils implemented interdisciplinary leadership and a structured quality improvement process, and all but one completed at least one quality improvement project and a toolkit for spreading improvements. Quality councils were perceived as most effective when service line leaders had well-functioning interdisciplinary communication. Matching positions within leadership hierarchies with appropriate supportive roles facilitated frontline quality improvement efforts. Two key resources were (a) a dedicated internal facilitator with project management, data collection, and presentation skills and (b) support for preparing customized data reports for identifying and addressing practice level quality issues. Overall, quality councils successfully cultivated interdisciplinary, multilevel primary care quality improvement leadership with accountability mechanisms and generated frontline innovations suitable for spread. Practice level performance data and quality improvement project management support were critical. In order to successfully facilitate systematic, sustainable primary care quality improvement, regional and executive health care system leaders should engage interdisciplinary practice level leadership in a priority-setting process that encourages frontline innovation and establish local structures such as quality councils to coordinate quality improvement initiatives, ensure accountability, and promote spread of best practices.

Poor sleep quality predicts deficient emotion information processing over time in early adolescence.

PubMed

Soffer-Dudek, Nirit; Sadeh, Avi; Dahl, Ronald E; Rosenblat-Stein, Shiran

2011-11-01

There is deepening understanding of the effects of sleep on emotional information processing. Emotion information processing is a key aspect of social competence, which undergoes important maturational and developmental changes in adolescence; however, most research in this area has focused on adults. Our aim was to test the links between sleep and emotion information processing during early adolescence. Sleep and facial information processing were assessed objectively during 3 assessment waves, separated by 1-year lags. Data were obtained in natural environments-sleep was assessed in home settings, and facial information processing was assessed at school. 94 healthy children (53 girls, 41 boys), aged 10 years at Time 1. N/A. Facial information processing was tested under neutral (gender identification) and emotional (emotional expression identification) conditions. Sleep was assessed in home settings using actigraphy for 7 nights at each assessment wave. Waking > 5 min was considered a night awakening. Using multilevel modeling, elevated night awakenings and decreased sleep efficiency significantly predicted poor performance only in the emotional information processing condition (e.g., b = -1.79, SD = 0.52, confidence interval: lower boundary = -2.82, upper boundary = -0.076, t(416.94) = -3.42, P = 0.001). Poor sleep quality is associated with compromised emotional information processing during early adolescence, a sensitive period in socio-emotional development.

Incorporating Learning Characteristics into Automatic Essay Scoring Models: What Individual Differences and Linguistic Features Tell Us about Writing Quality

ERIC Educational Resources Information Center

Crossley, Scott A.; Allen, Laura K.; Snow, Erica L.; McNamara, Danielle S.

2016-01-01

This study investigates a novel approach to automatically assessing essay quality that combines natural language processing approaches that assess text features with approaches that assess individual differences in writers such as demographic information, standardized test scores, and survey results. The results demonstrate that combining text…

Interim results of quality-control sampling of surface water for the Upper Colorado River National Water-Quality Assessment Study Unit, water years 1995-96

USGS Publications Warehouse

Spahr, N.E.; Boulger, R.W.

1997-01-01

Quality-control samples provide part of the information needed to estimate the bias and variability that result from sample collection, processing, and analysis. Quality-control samples of surface water collected for the Upper Colorado River National Water-Quality Assessment study unit for water years 1995?96 are presented and analyzed in this report. The types of quality-control samples collected include pre-processing split replicates, concurrent replicates, sequential replicates, post-processing split replicates, and field blanks. Analysis of the pre-processing split replicates, concurrent replicates, sequential replicates, and post-processing split replicates is based on differences between analytical results of the environmental samples and analytical results of the quality-control samples. Results of these comparisons indicate that variability introduced by sample collection, processing, and handling is low and will not affect interpretation of the environmental data. The differences for most water-quality constituents is on the order of plus or minus 1 or 2 lowest rounding units. A lowest rounding unit is equivalent to the magnitude of the least significant figure reported for analytical results. The use of lowest rounding units avoids some of the difficulty in comparing differences between pairs of samples when concentrations span orders of magnitude and provides a measure of the practical significance of the effect of variability. Analysis of field-blank quality-control samples indicates that with the exception of chloride and silica, no systematic contamination of samples is apparent. Chloride contamination probably was the result of incomplete rinsing of the dilute cleaning solution from the outlet ports of the decaport sample splitter. Silica contamination seems to have been introduced by the blank water. Sampling and processing procedures for water year 1997 have been modified as a result of these analyses.

Peer Review Quality and Transparency of the Peer-Review Process in Open Access and Subscription Journals.

PubMed

Wicherts, Jelte M

2016-01-01

Recent controversies highlighting substandard peer review in Open Access (OA) and traditional (subscription) journals have increased the need for authors, funders, publishers, and institutions to assure quality of peer-review in academic journals. I propose that transparency of the peer-review process may be seen as an indicator of the quality of peer-review, and develop and validate a tool enabling different stakeholders to assess transparency of the peer-review process. Based on editorial guidelines and best practices, I developed a 14-item tool to rate transparency of the peer-review process on the basis of journals' websites. In Study 1, a random sample of 231 authors of papers in 92 subscription journals in different fields rated transparency of the journals that published their work. Authors' ratings of the transparency were positively associated with quality of the peer-review process but unrelated to journal's impact factors. In Study 2, 20 experts on OA publishing assessed the transparency of established (non-OA) journals, OA journals categorized as being published by potential predatory publishers, and journals from the Directory of Open Access Journals (DOAJ). Results show high reliability across items (α = .91) and sufficient reliability across raters. Ratings differentiated the three types of journals well. In Study 3, academic librarians rated a random sample of 140 DOAJ journals and another 54 journals that had received a hoax paper written by Bohannon to test peer-review quality. Journals with higher transparency ratings were less likely to accept the flawed paper and showed higher impact as measured by the h5 index from Google Scholar. The tool to assess transparency of the peer-review process at academic journals shows promising reliability and validity. The transparency of the peer-review process can be seen as an indicator of peer-review quality allowing the tool to be used to predict academic quality in new journals.

Peer Review Quality and Transparency of the Peer-Review Process in Open Access and Subscription Journals

PubMed Central

Wicherts, Jelte M.

2016-01-01

Background Recent controversies highlighting substandard peer review in Open Access (OA) and traditional (subscription) journals have increased the need for authors, funders, publishers, and institutions to assure quality of peer-review in academic journals. I propose that transparency of the peer-review process may be seen as an indicator of the quality of peer-review, and develop and validate a tool enabling different stakeholders to assess transparency of the peer-review process. Methods and Findings Based on editorial guidelines and best practices, I developed a 14-item tool to rate transparency of the peer-review process on the basis of journals’ websites. In Study 1, a random sample of 231 authors of papers in 92 subscription journals in different fields rated transparency of the journals that published their work. Authors’ ratings of the transparency were positively associated with quality of the peer-review process but unrelated to journal’s impact factors. In Study 2, 20 experts on OA publishing assessed the transparency of established (non-OA) journals, OA journals categorized as being published by potential predatory publishers, and journals from the Directory of Open Access Journals (DOAJ). Results show high reliability across items (α = .91) and sufficient reliability across raters. Ratings differentiated the three types of journals well. In Study 3, academic librarians rated a random sample of 140 DOAJ journals and another 54 journals that had received a hoax paper written by Bohannon to test peer-review quality. Journals with higher transparency ratings were less likely to accept the flawed paper and showed higher impact as measured by the h5 index from Google Scholar. Conclusions The tool to assess transparency of the peer-review process at academic journals shows promising reliability and validity. The transparency of the peer-review process can be seen as an indicator of peer-review quality allowing the tool to be used to predict academic quality in new journals. PMID:26824759

Data-quality measures for stakeholder-implemented watershed-monitoring programs

USGS Publications Warehouse

Greve, Adrienne I.

2002-01-01

Community-based watershed groups, many of which collect environmental data, have steadily increased in number over the last decade. The data generated by these programs are often underutilized due to uncertainty in the quality of data produced. The incorporation of data-quality measures into stakeholder monitoring programs lends statistical validity to data. Data-quality measures are divided into three steps: quality assurance, quality control, and quality assessment. The quality-assurance step attempts to control sources of error that cannot be directly quantified. This step is part of the design phase of a monitoring program and includes clearly defined, quantifiable objectives, sampling sites that meet the objectives, standardized protocols for sample collection, and standardized laboratory methods. Quality control (QC) is the collection of samples to assess the magnitude of error in a data set due to sampling, processing, transport, and analysis. In order to design a QC sampling program, a series of issues needs to be considered: (1) potential sources of error, (2) the type of QC samples, (3) inference space, (4) the number of QC samples, and (5) the distribution of the QC samples. Quality assessment is the process of evaluating quality-assurance measures and analyzing the QC data in order to interpret the environmental data. Quality assessment has two parts: one that is conducted on an ongoing basis as the monitoring program is running, and one that is conducted during the analysis of environmental data. The discussion of the data-quality measures is followed by an example of their application to a monitoring program in the Big Thompson River watershed of northern Colorado.

42 CFR 482.96 - Condition of participation: Quality assessment and performance improvement (QAPI).

Code of Federal Regulations, 2010 CFR

2010-10-01

... performance improvement (QAPI). 482.96 Section 482.96 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... FOR HOSPITALS Requirements for Specialty Hospitals Transplant Center Process Requirements § 482.96 Condition of participation: Quality assessment and performance improvement (QAPI). Transplant centers must...

Operational CryoSat Product Quality Assessment

NASA Astrophysics Data System (ADS)

Mannan, Rubinder; Webb, Erica; Hall, Amanda; Bouzinac, Catherine

2013-12-01

The performance and quality of the CryoSat data products are routinely assessed by the Instrument Data quality Evaluation and Analysis Service (IDEAS). This information is then conveyed to the scientific and user community in order to allow them to utilise CryoSat data with confidence. This paper presents details of the Quality Control (QC) activities performed for CryoSat products under the IDEAS contract. Details of the different QC procedures and tools deployed by IDEAS to assess the quality of operational data are presented. The latest updates to the Instrument Processing Facility (IPF) for the Fast Delivery Marine (FDM) products and the future update to Baseline-C are discussed.

Deepening our understanding of quality improvement in Europe (DUQuE): overview of a study of hospital quality management in seven countries.

PubMed

Secanell, Mariona; Groene, Oliver; Arah, Onyebuchi A; Lopez, Maria Andrée; Kutryba, Basia; Pfaff, Holger; Klazinga, Niek; Wagner, Cordula; Kristensen, Solvejg; Bartels, Paul Daniel; Garel, Pascal; Bruneau, Charles; Escoval, Ana; França, Margarida; Mora, Nuria; Suñol, Rosa

2014-04-01

This paper provides an overview of the DUQuE (Deepening our Understanding of Quality Improvement in Europe) project, the first study across multiple countries of the European Union (EU) to assess relationships between quality management and patient outcomes at EU level. The paper describes the conceptual framework and methods applied, highlighting the novel features of this study. DUQuE was designed as a multi-level cross-sectional study with data collection at hospital, pathway, professional and patient level in eight countries. We aimed to collect data for the assessment of hospital-wide constructs from up to 30 randomly selected hospitals in each country, and additional data at pathway and patient level in 12 of these 30. A comprehensive conceptual framework was developed to account for the multiple levels that influence hospital performance and patient outcomes. We assessed hospital-specific constructs (organizational culture and professional involvement), clinical pathway constructs (the organization of care processes for acute myocardial infarction, stroke, hip fracture and deliveries), patient-specific processes and outcomes (clinical effectiveness, patient safety and patient experience) and external constructs that could modify hospital quality (external assessment and perceived external pressure). Data was gathered from 188 hospitals in 7 participating countries. The overall participation and response rate were between 75% and 100% for the assessed measures. This is the first study assessing relation between quality management and patient outcomes at EU level. The study involved a large number of respondents and achieved high response rates. This work will serve to develop guidance in how to assess quality management and makes recommendations on the best ways to improve quality in healthcare for hospital stakeholders, payers, researchers, and policy makers throughout the EU.

The use of bibliometrics to measure research quality in UK higher education institutions.

PubMed

Adams, Jonathan

2009-01-01

Research assessment in the UK has evolved over a quarter of a century from a loosely structured, peer-review based process to one with a well understood data portfolio and assessment methodology. After 2008, the assessment process will shift again, to the use of indicators based largely on publication and citation data. These indicators will in part follow the format introduced in 2008, with a profiling of assessment outcomes at national and international levels. However, the shift from peer assessment to a quantitative methodology raises critical issues about which metrics are appropriate and informative and how such metrics should be managed to produce weighting factors for funding formulae. The link between publication metrics and other perceptions of research quality needs to be thoroughly tested and reviewed, and may be variable between disciplines. Many of the indicators that drop out of publication data are poorly linked to quality and should not be used at all. There are also issues about which publications are the correct base for assessment, which staff should be included in a review, how subjects should be structured and how the citation data should be normalised to account for discipline-dependent variables. Finally, it is vital to consider the effect that any assessment process will have on the behaviour of those to be assessed.

Non-Destructive Spectroscopic Techniques and Multivariate Analysis for Assessment of Fat Quality in Pork and Pork Products: A Review

PubMed Central

Kucha, Christopher T.; Liu, Li; Ngadi, Michael O.

2018-01-01

Fat is one of the most important traits determining the quality of pork. The composition of the fat greatly influences the quality of pork and its processed products, and contribute to defining the overall carcass value. However, establishing an efficient method for assessing fat quality parameters such as fatty acid composition, solid fat content, oxidative stability, iodine value, and fat color, remains a challenge that must be addressed. Conventional methods such as visual inspection, mechanical methods, and chemical methods are used off the production line, which often results in an inaccurate representation of the process because the dynamics are lost due to the time required to perform the analysis. Consequently, rapid, and non-destructive alternative methods are needed. In this paper, the traditional fat quality assessment techniques are discussed with emphasis on spectroscopic techniques as an alternative. Potential spectroscopic techniques include infrared spectroscopy, nuclear magnetic resonance and Raman spectroscopy. Hyperspectral imaging as an emerging advanced spectroscopy-based technology is introduced and discussed for the recent development of assessment for fat quality attributes. All techniques are described in terms of their operating principles and the research advances involving their application for pork fat quality parameters. Future trends for the non-destructive spectroscopic techniques are also discussed. PMID:29382092

Fostering Faculty Leadership in the Institutional Assessment Process.

ERIC Educational Resources Information Center

La Potin, Armand S.; Haessig, Carolyn J.

1999-01-01

Applies John P. Kotter's eight-stage process as a model to demonstrate how faculty leadership can evolve in an institutional-assessment process that promotes change in campus tradition. Supports the idea that because faculty are responsible for student learning, the process of involving them as leaders will enhance the quality of the outcomes.…

Integrated Application of Quality-by-Design Principles to Drug Product Development: A Case Study of Brivanib Alaninate Film-Coated Tablets.

PubMed

Badawy, Sherif I F; Narang, Ajit S; LaMarche, Keirnan R; Subramanian, Ganeshkumar A; Varia, Sailesh A; Lin, Judy; Stevens, Tim; Shah, Pankaj A

2016-01-01

Modern drug product development is expected to follow quality-by-design (QbD) paradigm. At the same time, although there are several issue-specific examples in the literature that demonstrate the application of QbD principles, a holistic demonstration of the application of QbD principles to drug product development and control strategy, is lacking. This article provides an integrated case study on the systematic application of QbD to product development and demonstrates the implementation of QbD concepts in the different aspects of product and process design for brivanib alaninate film-coated tablets. Using a risk-based approach, the strategy for development entailed identification of product critical quality attributes (CQAs), assessment of risks to the CQAs, and performing experiments to understand and mitigate identified risks. Quality risk assessments and design of experiments were performed to understand the quality of the input raw materials required for a robust formulation and the impact of manufacturing process parameters on CQAs. In addition to the material property and process parameter controls, the proposed control strategy includes use of process analytical technology and conventional analytical tests to control in-process material attributes and ensure quality of the final product. Copyright © 2016. Published by Elsevier Inc.

Quality Measures for the Care of Patients with Insomnia

PubMed Central

Edinger, Jack D.; Buysse, Daniel J.; Deriy, Ludmila; Germain, Anne; Lewin, Daniel S.; Ong, Jason C.; Morgenthaler, Timothy I.

2015-01-01

The American Academy of Sleep Medicine (AASM) commissioned five Workgroups to develop quality measures to optimize management and care for patients with common sleep disorders including insomnia. Following the AASM process for quality measure development, this document describes measurement methods for two desirable outcomes of therapy, improving sleep quality or satisfaction, and improving daytime function, and for four processes important to achieving these goals. To achieve the outcome of improving sleep quality or satisfaction, pre- and post-treatment assessment of sleep quality or satisfaction and providing an evidence-based treatment are recommended. To realize the outcome of improving daytime functioning, pre- and post-treatment assessment of daytime functioning, provision of an evidence-based treatment, and assessment of treatment-related side effects are recommended. All insomnia measures described in this report were developed by the Insomnia Quality Measures Workgroup and approved by the AASM Quality Measures Task Force and the AASM Board of Directors. The AASM recommends the use of these measures as part of quality improvement programs that will enhance the ability to improve care for patients with insomnia. Citation: Edinger JD, Buysse DJ, Deriy L, Germain A, Lewin DS, Ong JC, Morgenthaler TI. Quality measures for the care of patients with insomnia. J Clin Sleep Med 2015;11(3):311–334. PMID:25700881

Validation of quality indicators for the organization of palliative care: a modified RAND Delphi study in seven European countries (the Europall project).

PubMed

Woitha, Kathrin; Van Beek, Karen; Ahmed, Nisar; Jaspers, Birgit; Mollard, Jean M; Ahmedzai, Sam H; Hasselaar, Jeroen; Menten, Johan; Vissers, Kris; Engels, Yvonne

2014-02-01

Validated quality indicators can help health-care professionals to evaluate their medical practices in a comparative manner to deliver optimal clinical care. No international set of quality indicators to measure the organizational aspects of palliative care settings exists. To develop and validate a set of structure and process indicators for palliative care settings in Europe. A two-round modified RAND Delphi process was conducted to rate clarity and usefulness of a previously developed set of 110 quality indicators. In total, 20 multi-professional palliative care teams of centers of excellence from seven European countries. In total, 56 quality indicators were rated as useful. These valid quality indicators concerned the following domains: the definition of a palliative care service (2 quality indicators), accessibility to palliative care (16 quality indicators), specific infrastructure to deliver palliative care (8 quality indicators), symptom assessment tools (1 quality indicator), specific personnel in palliative care services (9 quality indicators), documentation methodology of clinical data (14 quality indicators), evaluation of quality and safety procedures (1 quality indicator), reporting of clinical activities (1 quality indicator), and education in palliative care (4 quality indicator). The modified RAND Delphi process resulted in 56 international face-validated quality indicators to measure and compare organizational aspects of palliative care. These quality indicators, aimed to assess and improve the organization of palliative care, will be pilot tested in palliative care settings all over Europe and be used in the EU FP7 funded IMPACT project.

GEOSPATIAL QUALITY COUNCIL

EPA Science Inventory

Geospatial Science is increasingly becoming an important tool in making Agency decisions. QualIty Control and Quality Assurance are required to be integrated during the planning, implementation and assessment of geospatial databases, processes and products. In order to ensure Age...

Assessment Methodology for Process Validation Lifecycle Stage 3A.

PubMed

Sayeed-Desta, Naheed; Pazhayattil, Ajay Babu; Collins, Jordan; Chen, Shu; Ingram, Marzena; Spes, Jana

2017-07-01

The paper introduces evaluation methodologies and associated statistical approaches for process validation lifecycle Stage 3A. The assessment tools proposed can be applied to newly developed and launched small molecule as well as bio-pharma products, where substantial process and product knowledge has been gathered. The following elements may be included in Stage 3A: number of 3A batch determination; evaluation of critical material attributes, critical process parameters, critical quality attributes; in vivo in vitro correlation; estimation of inherent process variability (IPV) and PaCS index; process capability and quality dashboard (PCQd); and enhanced control strategy. US FDA guidance on Process Validation: General Principles and Practices, January 2011 encourages applying previous credible experience with suitably similar products and processes. A complete Stage 3A evaluation is a valuable resource for product development and future risk mitigation of similar products and processes. Elements of 3A assessment were developed to address industry and regulatory guidance requirements. The conclusions made provide sufficient information to make a scientific and risk-based decision on product robustness.

Improving the efficiency of selection to Core Medical Training: a study of the use of multiple assessment stations.

PubMed

Atkinson, J M; Tullo, E; Mitchison, H; Pearce, M S; Kumar, N

2012-06-01

To compare three separate assessment stations used for selection to Core Medical Training (CMT) and to determine the effect of reducing the number from three to two. Quantitative analysis of candidates' assessment station scores, financial analysis of costs of the selection process and quantitative and qualitative surveys of candidates and assessors. The assessment stations used for selection to CMT were reliable and valid for assessing suitability for employment as a CMT trainee. There was no significant difference in candidate ranking if only two assessment stations were used rather than three, i.e. there was no change in the likelihood of receiving a job offer. All of the assessment stations were perceived to have face validity by candidates and assessors. The efficiency of the selection process could be improved without loss of quality if two stations were used rather than three. Using two assessment stations rather than three would appear to improve the efficiency and maintain the quality of the CMT selection process while reducing costs.

Rapid quality assessment of Radix Aconiti Preparata using direct analysis in real time mass spectrometry.

PubMed

Zhu, Hongbin; Wang, Chunyan; Qi, Yao; Song, Fengrui; Liu, Zhiqiang; Liu, Shuying

2012-11-08

This study presents a novel and rapid method to identify chemical markers for the quality control of Radix Aconiti Preparata, a world widely used traditional herbal medicine. In the method, the samples with a fast extraction procedure were analyzed using direct analysis in real time mass spectrometry (DART MS) combined with multivariate data analysis. At present, the quality assessment approach of Radix Aconiti Preparata was based on the two processing methods recorded in Chinese Pharmacopoeia for the purpose of reducing the toxicity of Radix Aconiti and ensuring its clinical therapeutic efficacy. In order to ensure the safety and effectivity in clinical use, the processing degree of Radix Aconiti should be well controlled and assessed. In the paper, hierarchical cluster analysis and principal component analysis were performed to evaluate the DART MS data of Radix Aconiti Preparata samples in different processing times. The results showed that the well processed Radix Aconiti Preparata, unqualified processed and the raw Radix Aconiti could be clustered reasonably corresponding to their constituents. The loading plot shows that the main chemical markers having the most influence on the discrimination amongst the qualified and unqualified samples were mainly some monoester diterpenoid aconitines and diester diterpenoid aconitines, i.e. benzoylmesaconine, hypaconitine, mesaconitine, neoline, benzoylhypaconine, benzoylaconine, fuziline, aconitine and 10-OH-mesaconitine. The established DART MS approach in combination with multivariate data analysis provides a very flexible and reliable method for quality assessment of toxic herbal medicine. Copyright © 2012 Elsevier B.V. All rights reserved.

A survey-based benchmarking approach for health care using the Baldrige quality criteria.

PubMed

Jennings, K; Westfall, F

1994-09-01

Since 1988, manufacturing and service industries have been using the Malcolm Baldrige National Quality Award to assess their management processes (for example, leadership, information, and analysis) against critical performance criteria. Recognizing that the typical Baldrige assessment is time intensive and dependent on intensive training, The Pacer Group, a consulting firm in Dayton, Ohio, developed a self-assessment tool based on the Baldrige criteria which provides a snapshot assessment of an organization's management practices. The survey was administered at 25 hospitals within a health care system. Hospitals were able to compare their scores with other hospitals in the system, as well as the scores of a Baldrige award winner. Results were also analyzed on a systemwide basis to identify strengths and weaknesses across the system. For all 25 hospitals, the following areas were identified as strengths: management of process quality, leadership, and customer focus and satisfaction. Weaknesses included lack of employee involvement in the quality planning process, poor design of quality systems, and lack of cross-departmental cooperation. One of the surveyed hospitals launched improvement initiatives in knowledge of improvement tools and methods and in a patient satisfaction focus. A team was formed to improve the human resource management system. Also, a new unit was designed using patient-centered care principles. A team re-evaluated every operation that affected patients on the unit. A survey modeled after the Baldrige Award criteria can be useful in benchmarking an organization's quality improvement practices.

Approaching Assessment from a Learning Perspective: Elevating Assessment beyond Technique

ERIC Educational Resources Information Center

Simms, Michele; George, Beena

2014-01-01

Assessment is a key process in assuring quality education but how is it linked to the scholarship of teaching and learning (SoTL)? How can we join teaching and learning to the assessment process rather than view it as a stand-alone component in course and/or program development? This paper explores the relationship between assessment and the SoTL…

A Survey to Evaluate Facilitators and Barriers to Quality Measurement and Improvement: Adapting Tools for Implementation Research in Palliative Care Programs.

PubMed

Dy, Sydney M; Al Hamayel, Nebras Abu; Hannum, Susan M; Sharma, Ritu; Isenberg, Sarina R; Kuchinad, Kamini; Zhu, Junya; Smith, Katherine; Lorenz, Karl A; Kamal, Arif H; Walling, Anne M; Weaver, Sallie J

2017-12-01

Although critical for improving patient outcomes, palliative care quality indicators are not yet widely used. Better understanding of facilitators and barriers to palliative care quality measurement and improvement might improve their use and program quality. Development of a survey tool to assess palliative care team perspectives on facilitators and barriers to quality measurement and improvement in palliative care programs. We used the adapted Consolidated Framework for Implementation Research to define domains and constructs to select instruments. We assembled a draft survey and assessed content validity through pilot testing and cognitive interviews with experts and frontline practitioners for key items. We analyzed responses using a constant comparative process to assess survey item issues and potential solutions. We developed a final survey using these results. The survey includes five published instruments and two additional item sets. Domains include organizational characteristics, individual and team characteristics, intervention characteristics, and process of implementation. Survey modules include Quality Improvement in Palliative Care, Implementing Quality Improvement in the Palliative Care Program, Teamwork and Communication, Measuring the Quality of Palliative Care, and Palliative Care Quality in Your Program. Key refinements from cognitive interviews included item wording on palliative care team members, programs, and quality issues. This novel, adaptable instrument assesses palliative care team perspectives on barriers and facilitators for quality measurement and improvement in palliative care programs. Next steps include evaluation of the survey's construct validity and how survey results correlate with findings from program quality initiatives. Copyright © 2017 American Academy of Hospice and Palliative Medicine. All rights reserved.

The Validity of Higher-Order Questions as a Process Indicator of Educational Quality

ERIC Educational Resources Information Center

Renaud, Robert D.; Murray, Harry G.

2007-01-01

One way to assess the quality of education in post-secondary institutions is through the use of performance indicators. Studies that have compared currently popular process indicators (e.g., library size, percentage of faculty with PhD) found that after controlling for incoming student ability, these process indicators tend to be weakly associated…

Assessment Relationships in Higher Education: The Tension of Process and Practice

ERIC Educational Resources Information Center

Crook, Charles; Gross, Harriet; Dymott, Roy

2006-01-01

It is argued that the auditing demands of quality assurance have encouraged a greater proceduralisation of university coursework assessment. Interviews with academics from a cross-section of Psychology departments illustrated how assessment had acquired the tightly scripted character of an organisational process. Yet undergraduate focus group…

Mozambique's journey toward accreditation of the National Tuberculosis Reference Laboratory.

PubMed

Viegas, Sofia O; Azam, Khalide; Madeira, Carla; Aguiar, Carmen; Dolores, Carolina; Mandlaze, Ana P; Chongo, Patrina; Masamha, Jessina; Cirillo, Daniela M; Jani, Ilesh V; Gudo, Eduardo S

2017-01-01

Internationally-accredited laboratories are recognised for their superior test reliability, operational performance, quality management and competence. In a bid to meet international quality standards, the Mozambique National Institute of Health enrolled the National Tuberculosis Reference Laboratory (NTRL) in a continuous quality improvement process towards ISO 15189 accreditation. Here, we describe the road map taken by the NTRL to achieve international accreditation. The NTRL adopted the Strengthening Laboratory Management Toward Accreditation (SLMTA) programme as a strategy to implement a quality management system. After SLMTA, the Mozambique National Institute of Health committed to accelerate the NTRL's process toward accreditation. An action plan was designed to streamline the process. Quality indicators were defined to benchmark progress. Staff were trained to improve performance. Mentorship from an experienced assessor was provided. Fulfilment of accreditation standards was assessed by the Portuguese Accreditation Board. Of the eight laboratories participating in SLMTA, the NTRL was the best-performing laboratory, achieving a 53.6% improvement over the SLMTA baseline conducted in February 2011 to the Stepwise Laboratory Quality Improvement Process Towards Accreditation (SLIPTA) assessment in June 2013. During the accreditation assessment in September 2014, 25 minor nonconformities were identified and addressed. In March 2015, the NTRL received Portuguese Accreditation Board recognition of technical competency for fluorescence smear microscopy, and solid and liquid culture. The NTRL is the first laboratory in Mozambique to achieve ISO 15189 accreditation. From our experience, accreditation was made possible by institutional commitment, strong laboratory leadership, staff motivation, adequate infrastructure and a comprehensive action plan.

Development of the Quality of Australian Nursing Documentation in Aged Care (QANDAC) instrument to assess paper-based and electronic resident records.

PubMed

Wang, Ning; Björvell, Catrin; Hailey, David; Yu, Ping

2014-12-01

To develop an Australian nursing documentation in aged care (Quality of Australian Nursing Documentation in Aged Care (QANDAC)) instrument to measure the quality of paper-based and electronic resident records. The instrument was based on the nursing process model and on three attributes of documentation quality identified in a systematic review. The development process involved five phases following approaches to designing criterion-referenced measures. The face and content validities and the inter-rater reliability of the instrument were estimated using a focus group approach and consensus model. The instrument contains 34 questions in three sections: completion of nursing history and assessment, description of care process and meeting the requirements of data entry. Estimates of the validity and inter-rater reliability of the instrument gave satisfactory results. The QANDAC instrument may be a useful audit tool for quality improvement and research in aged care documentation. © 2013 ACOTA.

Measuring client satisfaction and the quality of family planning services: A comparative analysis of public and private health facilities in Tanzania, Kenya and Ghana

PubMed Central

2011-01-01

Background Public and private family planning providers face different incentive structures, which may affect overall quality and ultimately the acceptability of family planning for their intended clients. This analysis seeks to quantify differences in the quality of family planning (FP) services at public and private providers in three representative sub-Saharan African countries (Tanzania, Kenya and Ghana), to assess how these quality differentials impact upon FP clients' satisfaction, and to suggest how quality improvements can improve contraceptive continuation rates. Methods Indices of technical, structural and process measures of quality are constructed from Service Provision Assessments (SPAs) conducted in Tanzania (2006), Kenya (2004) and Ghana (2002) using direct observation of facility attributes and client-provider interactions. Marginal effects from multivariate regressions controlling for client characteristics and the multi-stage cluster sample design assess the relative importance of different measures of structural and process quality at public and private facilities on client satisfaction. Results Private health facilities appear to be of higher (interpersonal) process quality than public facilities but not necessarily higher technical quality in the three countries, though these differentials are considerably larger at lower level facilities (clinics, health centers, dispensaries) than at hospitals. Family planning client satisfaction, however, appears considerably higher at private facilities - both hospitals and clinics - most likely attributable to both process and structural factors such as shorter waiting times and fewer stockouts of methods and supplies. Conclusions Because the public sector represents the major source of family planning services in developing countries, governments and Ministries of Health should continue to implement and to encourage incentives, perhaps performance-based, to improve quality at public sector health facilities, as well as to strengthen regulatory and monitoring structures to ensure quality at both public and private facilities. In the meantime, private providers appear to be fulfilling an important gap in the provision of FP services in these countries. PMID:21864335

Measuring client satisfaction and the quality of family planning services: a comparative analysis of public and private health facilities in Tanzania, Kenya and Ghana.

PubMed

Hutchinson, Paul L; Do, Mai; Agha, Sohail

2011-08-24

Public and private family planning providers face different incentive structures, which may affect overall quality and ultimately the acceptability of family planning for their intended clients. This analysis seeks to quantify differences in the quality of family planning (FP) services at public and private providers in three representative sub-Saharan African countries (Tanzania, Kenya and Ghana), to assess how these quality differentials impact upon FP clients' satisfaction, and to suggest how quality improvements can improve contraceptive continuation rates. Indices of technical, structural and process measures of quality are constructed from Service Provision Assessments (SPAs) conducted in Tanzania (2006), Kenya (2004) and Ghana (2002) using direct observation of facility attributes and client-provider interactions. Marginal effects from multivariate regressions controlling for client characteristics and the multi-stage cluster sample design assess the relative importance of different measures of structural and process quality at public and private facilities on client satisfaction. Private health facilities appear to be of higher (interpersonal) process quality than public facilities but not necessarily higher technical quality in the three countries, though these differentials are considerably larger at lower level facilities (clinics, health centers, dispensaries) than at hospitals. Family planning client satisfaction, however, appears considerably higher at private facilities - both hospitals and clinics - most likely attributable to both process and structural factors such as shorter waiting times and fewer stockouts of methods and supplies. Because the public sector represents the major source of family planning services in developing countries, governments and Ministries of Health should continue to implement and to encourage incentives, perhaps performance-based, to improve quality at public sector health facilities, as well as to strengthen regulatory and monitoring structures to ensure quality at both public and private facilities. In the meantime, private providers appear to be fulfilling an important gap in the provision of FP services in these countries.

Automated Assessment of the Quality of Peer Reviews Using Natural Language Processing Techniques

ERIC Educational Resources Information Center

Ramachandran, Lakshmi; Gehringer, Edward F.; Yadav, Ravi K.

2017-01-01

A "review" is textual feedback provided by a reviewer to the author of a submitted version. Peer reviews are used in academic publishing and in education to assess student work. While reviews are important to e-commerce sites like Amazon and e-bay, which use them to assess the quality of products and services, our work focuses on…

Assessment of the quality of medical care among patients with early stage prostate cancer undergoing expectant management in the United States.

PubMed

Ritchey, Jamie; Gay, E Greer; Spencer, Benjamin A; Miller, David C; Wallner, Lauren P; Stewart, Andrew K; Dunn, Rodney L; Litwin, Mark S; Wei, John T

2012-09-01

Given the increased attention to the quality and cost of medical care, the Institute of Medicine and Centers for Medicare and Medicaid Services have called for performance measurement and reporting. The clinical management of prostate cancer has been outlined, yet is not intended to describe quality prostate cancer care. Therefore, RAND researchers developed quality indicators for early stage prostate cancer. The ACoS (American College of Surgeons) used these indicators to perform the first national assessment to our knowledge of the quality of care among men with early stage prostate cancer undergoing expectant management. Information from medical records was abstracted for evidence of compliance with the RAND indicators (structure and process). Weighted and stratified proportions were calculated to assess indicator compliance. Logistic regression models were fit and evaluated by hospital type and patient factors. A weighted and stratified total of 13,876 early stage prostate cancer cases on expectant management in 2000 to 2001 were investigated. Compliance with structural indicators was high (greater than 80%) and compliance with process indicators varied (19% to 87%). Differences in process indicators were observed from models by hospital type and comorbid conditions, but not for age, race or insurance status. Using the RAND quality indicators this study revealed several process areas for quality improvement among men with early stage prostate cancer on expectant management in the United States. Efforts to improve the quality of early stage prostate cancer care need to move beyond the paradigm of age, race and insurance status. Copyright © 2012 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Quality of Care Measures for the Management of Unhealthy Alcohol Use

PubMed Central

Hepner, Kimberly A.; Watkins, Katherine E.; Farmer, Carrie M.; Rubenstein, Lisa; Pedersen, Eric R.; Pincus, Harold Alan

2017-01-01

There is a paucity of quality measures to assess the care for the range of unhealthy alcohol use, ranging from risky drinking to alcohol use disorders. Using a two-phase expert panel review process, we sought to develop an expanded set of quality of care measures for unhealthy alcohol use, focusing on outpatient care delivered in both primary care and specialty care settings. This process generated 25 candidate measures. Eight measures address screening and assessment, 11 address aspects of treatment, and six address follow-up. These quality measures represent high priority targets for future development, including creating detailed technical specifications and pilot testing them to evaluate their utility in terms of feasibility, reliability, and validity. PMID:28340902

Processes to Preserve Spice and Herb Quality and Sensory Integrity During Pathogen Inactivation

PubMed Central

Moberg, Kayla; Amin, Kemia N.; Wright, Melissa; Newkirk, Jordan J.; Ponder, Monica A.; Acuff, Gary R.; Dickson, James S.

2017-01-01

Abstract Selected processing methods, demonstrated to be effective at reducing Salmonella, were assessed to determine if spice and herb quality was affected. Black peppercorn, cumin seed, oregano, and onion powder were irradiated to a target dose of 8 kGy. Two additional processes were examined for whole black peppercorns and cumin seeds: ethylene oxide (EtO) fumigation and vacuum assisted‐steam (82.22 °C, 7.5 psia). Treated and untreated spices/herbs were compared (visual, odor) using sensory similarity testing protocols (α = 0.20; β = 0.05; proportion of discriminators: 20%) to determine if processing altered sensory quality. Analytical assessment of quality (color, water activity, and volatile chemistry) was completed. Irradiation did not alter visual or odor sensory quality of black peppercorn, cumin seed, or oregano but created differences in onion powder, which was lighter (higher L *) and more red (higher a*) in color, and resulted in nearly complete loss of measured volatile compounds. EtO processing did not create detectable odor or appearance differences in black peppercorn; however visual and odor sensory quality differences, supported by changes in color (higher b *; lower L *) and increased concentrations of most volatiles, were detected for cumin seeds. Steam processing of black peppercorn resulted in perceptible odor differences, supported by increased concentration of monoterpene volatiles and loss of all sesquiterpenes; only visual differences were noted for cumin seed. An important step in process validation is the verification that no effect is detectable from a sensory perspective. PMID:28407236

Methods and dimensions of electronic health record data quality assessment: enabling reuse for clinical research

PubMed Central

Weng, Chunhua

2013-01-01

Objective To review the methods and dimensions of data quality assessment in the context of electronic health record (EHR) data reuse for research. Materials and methods A review of the clinical research literature discussing data quality assessment methodology for EHR data was performed. Using an iterative process, the aspects of data quality being measured were abstracted and categorized, as well as the methods of assessment used. Results Five dimensions of data quality were identified, which are completeness, correctness, concordance, plausibility, and currency, and seven broad categories of data quality assessment methods: comparison with gold standards, data element agreement, data source agreement, distribution comparison, validity checks, log review, and element presence. Discussion Examination of the methods by which clinical researchers have investigated the quality and suitability of EHR data for research shows that there are fundamental features of data quality, which may be difficult to measure, as well as proxy dimensions. Researchers interested in the reuse of EHR data for clinical research are recommended to consider the adoption of a consistent taxonomy of EHR data quality, to remain aware of the task-dependence of data quality, to integrate work on data quality assessment from other fields, and to adopt systematic, empirically driven, statistically based methods of data quality assessment. Conclusion There is currently little consistency or potential generalizability in the methods used to assess EHR data quality. If the reuse of EHR data for clinical research is to become accepted, researchers should adopt validated, systematic methods of EHR data quality assessment. PMID:22733976

Quality of the delivery services in health facilities in Northern Ethiopia.

PubMed

Fisseha, Girmatsion; Berhane, Yemane; Worku, Alemayehu; Terefe, Wondwossen

2017-03-09

Substantial improvements have been observed in the coverage of and access to maternal health service, especially in skilled birth attendants, in Ethiopia. However, the quality of care has been lagging behind. Therefore, this study investigated the status of the quality of delivery services in Northern Ethiopia. A facility based survey was conducted from December 2014 to February 2015 in Northern Ethiopia. The quality of delivery service was assessed in 32 health facilities using a facility audit checklist, by reviewing delivery, by conducting in-depth interview and observation, and by conducting exit interviews with eligible mothers. Facilities were considered as 'good quality' if they scored positively on 75% of the quality indicators set in the national guidelines for all the three components; input (materials, infrastructure, and human resource), process (adherence to standard care procedures during intrapartum and immediate postpartum periods) and output (the mothers' satisfaction and utilization of lifesaving procedures). Overall 2 of 32 (6.3%) of the study facilities fulfilled all the three quality components; input, process and output. Two of the three components were assessed as good in 11 of the 32 (34.4%) health facilities. The input quality was the better of the other quality components; which was good in 21 out of the 32 (65.6%) health facilities. The process and output quality was good in only 10 of the 32 (31.3%) facilities. Only 6.3% of the studied health facilities had good quality in all three dimensions of quality measures that was done in accordance to the national delivery service guidelines. The most compromised quality component was the process. Systematic and sustained efforts need to be strengthened to improve all dimensions of quality in order to achieve the desired quality of delivery services and increase the proportion of births occurring in health facilities.

Improving the Quality of Health Care Services for Adolescents, Globally: A Standards-Driven Approach

PubMed Central

Nair, Manisha; Baltag, Valentina; Bose, Krishna; Boschi-Pinto, Cynthia; Lambrechts, Thierry; Mathai, Matthews

2015-01-01

Purpose The World Health Organization (WHO) undertook an extensive and elaborate process to develop eight Global Standards to improve quality of health care services for adolescents. The objectives of this article are to present the Global Standards and their method of development. Methods The Global Standards were developed through a four-stage process: (1) conducting needs assessment; (2) developing the Global Standards and their criteria; (3) expert consultations; and (4) assessing their usability. Needs assessment involved conducting a meta-review of systematic reviews and two online global surveys in 2013, one with primary health care providers and another with adolescents. The Global Standards were developed based on the needs assessment in conjunction with analysis of 26 national standards from 25 countries. The final document was reviewed by experts from the World Health Organization regional and country offices, governments, academia, nongovernmental organizations, and development partners. The standards were subsequently tested in Benin and in a regional expert consultation of Latin America and Caribbean countries for their usability. Results The process resulted in the development of eight Global Standards and 79 criteria for measuring them: (1) adolescents' health literacy; (2) community support; (3) appropriate package of services; (4) providers' competencies; (5) facility characteristics; (6) equity and nondiscrimination; (7) data and quality improvement; and (8) adolescents' participation. Conclusions The eight standards are intended to act as benchmarks against which quality of health care provided to adolescents could be compared. Health care services can use the standards as part of their internal quality assurance mechanisms or as part of an external accreditation process. PMID:26299556

Comparison of patients' assessments of the quality of stroke care with audit findings.

PubMed

Howell, Esther; Graham, Chris; Hoffman, A; Lowe, D; McKevitt, Christopher; Reeves, Rachel; Rudd, A G

2007-12-01

To determine the extent of correlation between stroke patients' experiences of hospital care with the quality of services assessed in a national audit. Patients' assessments of their care derived from survey data were linked to data obtained in the National Sentinel Stroke Audit 2004 for 670 patients in 51 English NHS trusts. A measure of patients' experience of hospital stroke care was derived by summing responses to 31 survey items and grouping these into three broad concept domains: quality of care; information; and relationships with staff. Audit data were extracted from hospital admissions data and management information to assess the organisation of services, and obtained retrospectively from patient records to evaluate the delivery of care. Patient survey responses were compared with audit measures of organisation of care and compliance with clinical process standards. Patient experience scores were positively correlated with clinicians' assessment of the organisational quality of stroke care, but were largely unrelated to clinical process standards. Responses to individual questions regarding communication about diagnosis revealed a discrepancy between clinicians' and patients' reports. Better organised stroke care is associated with more positive patient experiences. Examining areas of disparity between patients' and clinicians' reports is important for understanding the complex nature of healthcare and for identifying areas for quality improvement. Future evaluations of the quality of stroke services should include a validated patient experience survey in addition to audit of clinical records.

Validity as a social imperative for assessment in health professions education: a concept analysis.

PubMed

Marceau, Mélanie; Gallagher, Frances; Young, Meredith; St-Onge, Christina

2018-06-01

Assessment can have far-reaching consequences for future health care professionals and for society. Thus, it is essential to establish the quality of assessment. Few modern approaches to validity are well situated to ensure the quality of complex assessment approaches, such as authentic and programmatic assessments. Here, we explore and delineate the concept of validity as a social imperative in the context of assessment in health professions education (HPE) as a potential framework for examining the quality of complex and programmatic assessment approaches. We conducted a concept analysis using Rodgers' evolutionary method to describe the concept of validity as a social imperative in the context of assessment in HPE. Supported by an academic librarian, we developed and executed a search strategy across several databases for literature published between 1995 and 2016. From a total of 321 citations, we identified 67 articles that met our inclusion criteria. Two team members analysed the texts using a specified approach to qualitative data analysis. Consensus was achieved through full team discussions. Attributes that characterise the concept were: (i) demonstration of the use of evidence considered credible by society to document the quality of assessment; (ii) validation embedded through the assessment process and score interpretation; (iii) documented validity evidence supporting the interpretation of the combination of assessment findings, and (iv) demonstration of a justified use of a variety of evidence (quantitative and qualitative) to document the quality of assessment strategies. The emerging concept of validity as a social imperative highlights some areas of focus in traditional validation frameworks, whereas some characteristics appear unique to HPE and move beyond traditional frameworks. The study reflects the importance of embedding consideration for society and societal concerns throughout the assessment and validation process, and may represent a potential lens through which to examine the quality of complex and programmatic assessment approaches. © 2018 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Quality transitivity and traceability system of herbal medicine products based on quality markers.

PubMed

Liu, Changxiao; Guo, De-An; Liu, Liang

2018-05-15

Due to a variety of factors to affect the herb quality, the existing quality management model is unable to evaluate the process control. The development of the concept of "quality marker" (Q-marker) lays basis for establishing an independent process quality control system for herbal products. To ensure the highest degree of safety, effectiveness and quality process control of herbal products, it is aimed to establish a quality transitivity and traceability system of quality and process control from raw materials to finished herbal products. Based on the key issues and challenges of quality assessment, the current status of quality and process controls from raw materials to herbal medicinal products listed in Pharmacopoeia were analyzed and the research models including discovery and identification of Q-markers, analysis and quality management of risk evaluation were designed. Authors introduced a few new technologies and methodologies, such as DNA barcoding, chromatographic technologies, fingerprint analysis, chemical markers, bio-responses, risk management and solution for quality process control. The quality and process control models for herbal medicinal products were proposed and the transitivity and traceability system from raw materials to the finished products was constructed to improve the herbal quality from the entire supply and production chain. The transitivity and traceability system has been established based on quality markers, especially on how to control the production process under Good Engineering Practices, as well as to implement the risk management for quality and process control in herbal medicine production. Copyright © 2018 Elsevier GmbH. All rights reserved.

Modeling of process of forming quality parameters for surfaces of parts by diamond burnishing taking into account technological heredity

NASA Astrophysics Data System (ADS)

Nagorkin, M. N.; Fyodorov, V. P.; Kovalyova, E. V.

2018-03-01

The paper presents a methodology for quantitative assessment of the influence of technological heredity on the formation of quality parameters for surfaces of machine parts. An example of an estimation of influence factors of technological subsystems of processing by end milling processing by composite 10 and the subsequent diamond burnishing is presented.

Evaluating treatment process redesign by applying the EFQM Excellence Model.

PubMed

Nabitz, Udo; Schramade, Mark; Schippers, Gerard

2006-10-01

To evaluate a treatment process redesign programme implementing evidence-based treatment as part of a total quality management in a Dutch addiction treatment centre. Quality management was monitored over a period of more than 10 years in an addiction treatment centre with 550 professionals. Changes are evaluated, comparing the scores on the nine criteria of the European Foundation for Quality Management (EFQM) Excellence Model before and after a major redesign of treatment processes and ISO certification. In the course of 10 years, most intake, care, and cure processes were reorganized, the support processes were restructured and ISO certified, 29 evidence-based treatment protocols were developed and implemented, and patient follow-up measuring was established to make clinical outcomes transparent. Comparing the situation before and after the changes shows that the client satisfaction scores are stable, that the evaluation by personnel and society is inconsistent, and that clinical, production, and financial outcomes are positive. The overall EFQM assessment by external assessors in 2004 shows much higher scores on the nine criteria than the assessment in 1994. Evidence-based treatment can successfully be implemented in addiction treatment centres through treatment process redesign as part of a total quality management strategy, but not all results are positive.

Primary Teacher's Perceptions of Classroom Assessment Practices as Means of Providing Quality Primary/Basic Education by Botswana and Nigeria

ERIC Educational Resources Information Center

Nenty, H. J.; Adedoyin, O. O.; Odili, John N.; Major, T. E.

2007-01-01

More than any other of its aspects, assessment plays a central role in determining the quality of education. Quality of primary/basic education (QoE) can be viewed as the extent to which the process of education at the primary education level maximizes desirable outcomes in terms of cognitive, affective and psychomotor behaviour of the learners.…

Evaluating Quality of Decision-Making Processes in Medicines' Development, Regulatory Review, and Health Technology Assessment: A Systematic Review of the Literature

PubMed Central

Bujar, Magdalena; McAuslane, Neil; Walker, Stuart R.; Salek, Sam

2017-01-01

Introduction: Although pharmaceutical companies, regulatory authorities, and health technology assessment (HTA) agencies have been increasingly using decision-making frameworks, it is not certain whether these enable better quality decision making. This could be addressed by formally evaluating the quality of decision-making process within those organizations. The aim of this literature review was to identify current techniques (tools, questionnaires, surveys, and studies) for measuring the quality of the decision-making process across the three stakeholders. Methods: Using MEDLINE, Web of Knowledge, and other Internet-based search engines, a literature review was performed to systematically identify techniques for assessing quality of decision making in medicines development, regulatory review, and HTA. A structured search was applied using key words and a secondary review was carried out. In addition, the measurement properties of each technique were assessed and compared. Ten Quality Decision-Making Practices (QDMPs) developed previously were then used as a framework for the evaluation of techniques identified in the review. Due to the variation in studies identified, meta-analysis was inappropriate. Results: This review identified 13 techniques, where 7 were developed specifically to assess decision making in medicines' development, regulatory review, or HTA; 2 examined corporate decision making, and 4 general decision making. Regarding how closely each technique conformed to the 10 QDMPs, the 13 techniques assessed a median of 6 QDMPs, with a mode of 3 QDMPs. Only 2 techniques evaluated all 10 QDMPs, namely the Organizational IQ and the Quality of Decision Making Orientation Scheme (QoDoS), of which only one technique, QoDoS could be applied to assess decision making of both individuals and organizations, and it possessed generalizability to capture issues relevant to companies as well as regulatory authorities. Conclusion: This review confirmed a general paucity of research in this area, particularly regarding the development and systematic application of techniques for evaluating quality decision making, with no consensus around a gold standard. This review has identified QoDoS as the most promising available technique for assessing decision making in the lifecycle of medicines and the next steps would be to further test its validity, sensitivity, and reliability. PMID:28443022

Hospital implementation of health information technology and quality of care: are they related?

PubMed

Restuccia, Joseph D; Cohen, Alan B; Horwitt, Jedediah N; Shwartz, Michael

2012-09-27

Recently, there has been considerable effort to promote the use of health information technology (HIT) in order to improve health care quality. However, relatively little is known about the extent to which HIT implementation is associated with hospital patient care quality. We undertook this study to determine the association of various HITs with: hospital quality improvement (QI) practices and strategies; adherence to process of care measures; risk-adjusted inpatient mortality; patient satisfaction; and assessment of patient care quality by hospital quality managers and front-line clinicians. We conducted surveys of quality managers and front-line clinicians (physicians and nurses) in 470 short-term, general hospitals to obtain data on hospitals' extent of HIT implementation, QI practices and strategies, assessments of quality performance, commitment to quality, and sufficiency of resources for QI. Of the 470 hospitals, 401 submitted complete data necessary for analysis. We also developed measures of hospital performance from several publicly data available sources: Hospital Compare adherence to process of care measures; Medicare Provider Analysis and Review (MEDPAR) file; and Hospital Consumer Assessment of Healthcare Providers and Systems HCAHPS® survey. We used Poisson regression analysis to examine the association between HIT implementation and QI practices and strategies, and general linear models to examine the relationship between HIT implementation and hospital performance measures. Controlling for potential confounders, we found that hospitals with high levels of HIT implementation engaged in a statistically significant greater number of QI practices and strategies, and had significantly better performance on mortality rates, patient satisfaction measures, and assessments of patient care quality by hospital quality managers; there was weaker evidence of higher assessments of patient care quality by front-line clinicians. Hospital implementation of HIT was positively associated with activities intended to improve patient care quality and with higher performance on four of six performance measures.

Suitability of the Literacy and Numeracy Screening (LINUS) 2.0 Programme in Assessing Children's Early Literacy

ERIC Educational Resources Information Center

Luyee, Eunice Ong; Roselan, Fauzan Izzati; Anwardeen, Nor Hafizah; Mustapa, Fatin Hazirah Mohd

2015-01-01

Early literacy skills are crucial in a child's learning process and awareness should be raised in order to ensure the quality of early literacy assessments. In this paper, the writers discuss the quality of early literacy assessment in Malaysia, LINUS 2.0 by looking at its validity and reliability. An established early literacy program is compared…

Reviewing the Review: An Assessment of Dissertation Reviewer Feedback Quality

ERIC Educational Resources Information Center

Lehan, Tara; Hussey, Heather; Mika, Eva

2016-01-01

Throughout the dissertation process, the chair and committee members provide feedback regarding quality to help the doctoral candidate to produce the highest-quality document and become an independent scholar. Nevertheless, results of previous research suggest that overall dissertation quality generally is poor. Because much of the feedback about…

Information Design: A New Approach to Teaching Technical Writing Service Courses

ERIC Educational Resources Information Center

McKee, Candie DeLane

2012-01-01

This study used a needs assessment, process analysis, process design, and textbook design to develop a new process and new textbook, based on Cargile-Cook's layered literacies, Quesenbery's five qualities of usability, and Carliner's information design theories, for use in technical writing service learning courses. The needs assessment was based…

Service Quality Of Diagnostic Fine Needle Aspiration Cytology In A Tertiary Care Hospital Of Lahore (Process Measure As Patient's Perspective).

PubMed

Rizvi, Zainab; Usmani, Rabia Arshed; Rizvi, Amna; Wazir, Salim; Zahra, Taskeen; Rasool, Hafza

2017-01-01

Quality of any service is the most important aspect for the manufacturer as well as the consumer. The primary objective of any nation's health system is to provide supreme quality health care services to its patients. The objective of this study was to assess the quality of diagnostic fine needle aspiration cytology service in a tertiary care hospital. As Patient's perspectives provide valuable information on quality of process, therefore, patient's perception in terms of satisfaction with the service was measured. In this cross sectional analytical study, 291 patients undergoing fine needle aspiration cytology in Mayo Hospital were selected by systematic sampling technique. Information regarding satisfaction of patients with four dimensions of service quality process, namely "procedure, sterilization, conduct and competency of doctor" was collected through interview on questionnaire. The questionnaire was developed on SERVQUAL model, a measurement tool, for quality assessment of services provided to patients. All items were assessed on 2- point likert scale (0=dissatisfied, 1=satisfied). Frequencies and percentages of satisfied and dissatisfied patients were recorded for each item and all items in each dimension were scored. If the percentage of sum of all item scores of a dimension was ≥60, the dimension was 'good quality'. Whereas <60% was 'poor quality' dimension. Data was analysed using epi-info-3.5.1. Fisher test was applied to check statistical significance. (p-value <0.05). Out of the 4 dimensions of service quality process, Procedure (48.8%), Sterilization (51.5%) and practitioner conduct (50.9%) were perceived as 'poor' by the patients. Only practitioner competency (67.4%) was perceived as 'good'. Comparison of dimensions of service quality scoring with overall level of patient satisfaction revealed that all 4 dimensions were significantly related to patient dissatisfaction (p<.05). The study suggests that service quality of therapeutic and diagnostic procedures in public hospitals should be routinely monitored from the patients' point of view as most aspects of service quality in public hospitals of Pakistan, require improvements. In this manner patient's satisfaction regarding use of services in public hospitals can be made better.

Environmental analysis of waste foundry sand via life cycle assessment.

PubMed

Mitterpach, Jozef; Hroncová, Emília; Ladomerský, Juraj; Balco, Karol

2017-01-01

The aim of this manuscript is to provide an environmental assessment of the creation and use of waste foundry sand (WFS) via an LCA in a foundry for grey cast iron. A life cycle impact assessment was carried out using SimaPro 8. This environmental analysis assessed the impact of creating waste foundry sand (WFS) in a foundry, Hronec (Slovakia, Central Europe). According to BREF, this foundry is classified as an iron foundry with a production capacity greater than 20 t/day with processes typical for grey cast iron foundries. Molten metal is poured into single-use sand moulds. We identified those factors influencing the creation and use of WFS which significantly affect the quality of the environment. The use of WFS from the production of cores in regenerated moulding mixtures with installed circuits brings marked minimisation of material and energy inputs in the processes of creating WFS and it positively influences the consumption of resources and the quality of the ecosystem. Space for lessening the impact of WFS processes upon the consumption of resources and ecosystem quality is mainly found in recycling WFS in the building sector. In the next step, it is necessary to thoroughly verify the eco-toxicological properties of not only the created WFS and other foundry waste, but mainly the building products for which this waste is used. In terms of transportation, it is important that waste is recycled at local level. The processes of creating WFS have a marked influence upon all the selected waste categories (consumption of resources, ecosystem quality, human health). By minimising material inputs into processes and the effective adjustment of production technology, a foundry can significantly lessen the impacts of processes for creating WFS upon the environment.

Developing World-Class Customer Service at Navy Field Contracting Activities: An Assessment of the FISC San Diego Regional Contracts Department.

DTIC Science & Technology

1997-06-01

service quality benchmark is determined and then applied to HSC San Diego Regional Contracts Department to assess service ability and identify areas for possible improvement. This assessment process highlights the recent emphasis on improved service quality both in the Federal Government and the private sector. The thesis defines world-class customer service and then describes various aspects of service quality including the customer’s perspective on service, how service is delivered, how to effectively communicate with the

Chapter 8: Acoustic Assessment of Wood Quality in Trees and Logs

Treesearch

Xiping Wang; Peter Carter

2015-01-01

Assessing the quality of raw wood materials has become a crucial issue in the operational value chain as forestry and the wood processing industry are increasingly under economic pressure to maximize extracted value. A significant effort has been devoted toward developing robust nondestructive evaluation (NDE) technologies capable of predicting the intrinsic wood...

Professionalization in Universities and European Convergence

ERIC Educational Resources Information Center

Vivas, Amparo Jimenez; Hevia, David Menendez Alvarez

2009-01-01

The constant assessment of the quality of higher education within the framework of European convergence is a challenge for all those universities that wish their degrees and diplomas to reflect a unified Europe. As is the case in any assessment, change and review process, the quest to improve quality implies measuring achievement of the objectives…

DYNAMIC EVALUATION OF REGIONAL AIR QUALITY MODELS: ASSESSING CHANGES TO O 3 STEMMING FROM CHANGES IN EMISSIONS AND METEOROLOGY

EPA Science Inventory

Regional-scale air quality models are used to estimate the response of air pollutants to potential emission control strategies as part of the decision-making process. Traditionally, the model predicted pollutant concentrations are evaluated for the “base case” to assess a model’s...

The Ontological Architectures in the Application of a Knowledge Management System for Curricular Assessment

ERIC Educational Resources Information Center

Olson, Brandon D.

2012-01-01

Institutions of higher education are facing increasing pressure to improve the effectiveness and quality of academic programs (Association of Governing Boards, Top public policy issues 2011-2012, 2011). These institutions apply curricular assessment processes as a means to evaluate and improve academic effectiveness and quality. Knowledge…

Assessing U.S. Public School Quality: The Advantages of Combining Internal "Consumer Ratings" with External NCLB Ratings

ERIC Educational Resources Information Center

Price, Heather E.

2016-01-01

The school quality assessment process under No Child Left Behind (NCLB) is criticized for oversimplifying and overemphasizing standardized test results and unfairly targeting diverse, urban schools. There has been much development in alternative test score evaluations, especially value-added models. These developments have tilted the public…

Evaluating the Quality of Competency Assessment in Pharmacy: A Framework for Workplace Learning.

PubMed

Shah, Shailly; McLaughlin, Jacqueline E; Eckel, Stephen F; Mangun, Jesica; Hawes, Emily

2016-01-19

Demonstration of achieved competencies is critical in the pharmacy workplace. The purpose of this study was to evaluate the quality of the competency assessment program for pharmacy residents at an academic medical center. The competency assessment program (CAP) survey is a validated, 48-item instrument that evaluates the quality of an assessment program based on 12 criteria, each measured by four questions on a scale of 0 to 100. The CAP was completed by residents ( n = 23) and preceptors ( n = 28) from the pharmacy residency program between 2010 and 2013. Results were analyzed using descriptive statistics, Cronbach's alpha, and non-parametric tests. Educational Consequences was the only quality criteria falling below the standard for "good quality." Participants that completed residency training elsewhere rated the Comparability (0.04) and Meaningfulness (0.01) of the assessment program higher than those that completed residency at the academic medical center. There were no significant differences between resident and preceptor scores. Overall, the quality of the assessment program was rated highly by residents and preceptors. The process described here provides a useful framework for understanding the quality of workplace learning assessments in pharmacy practice.

Shifting the focus to practice quality improvement in radiation oncology.

PubMed

Crozier, Cheryl; Erickson-Wittmann, Beth; Movsas, Benjamin; Owen, Jean; Khalid, Najma; Wilson, J Frank

2011-09-01

To demonstrate how the American College of Radiology, Quality Research in Radiation Oncology (QRRO) process survey database can serve as an evidence base for assessing quality of care in radiation oncology. QRRO has drawn a stratified random sample of radiation oncology facilities in the USA and invited those facilities to participate in a Process Survey. Information from a prior QRRO Facilities Survey has been used along with data collected under the current National Process Survey to calculate national averages and make statistically valid inferences for national process measures for selected cancers in which radiation therapy plays a major role. These measures affect outcomes important to patients and providers and measure quality of care. QRRO's survey data provides national benchmark data for numerous quality indicators. The Process Survey is "fully qualified" as a Practice Quality Improvement project by the American Board of Radiology under its Maintenance of Certification requirements for radiation oncology and radiation physics. © 2011 National Association for Healthcare Quality.

Assessing Faculty Experiences with and Perceptions of an Internal Quality Assurance Process for Undergraduate Distributed Learning Courses: A Pilot Study

ERIC Educational Resources Information Center

Rucker, Ryan; Edwards, Karen; Frass, Lydia R.

2015-01-01

To ensure that online courses match traditional classes' quality, some institutions are implementing internal standards for online course design and quality review. The University of South Carolina created the Distributed Learning Quality Review program, based on "Quality Matters'" standards. It was designed to be faculty-guided, as…

Mozambique’s journey toward accreditation of the National Tuberculosis Reference Laboratory

PubMed Central

Madeira, Carla; Aguiar, Carmen; Dolores, Carolina; Mandlaze, Ana P.; Chongo, Patrina; Masamha, Jessina

2017-01-01

Background Internationally-accredited laboratories are recognised for their superior test reliability, operational performance, quality management and competence. In a bid to meet international quality standards, the Mozambique National Institute of Health enrolled the National Tuberculosis Reference Laboratory (NTRL) in a continuous quality improvement process towards ISO 15189 accreditation. Here, we describe the road map taken by the NTRL to achieve international accreditation. Methods The NTRL adopted the Strengthening Laboratory Management Toward Accreditation (SLMTA) programme as a strategy to implement a quality management system. After SLMTA, the Mozambique National Institute of Health committed to accelerate the NTRL’s process toward accreditation. An action plan was designed to streamline the process. Quality indicators were defined to benchmark progress. Staff were trained to improve performance. Mentorship from an experienced assessor was provided. Fulfilment of accreditation standards was assessed by the Portuguese Accreditation Board. Results Of the eight laboratories participating in SLMTA, the NTRL was the best-performing laboratory, achieving a 53.6% improvement over the SLMTA baseline conducted in February 2011 to the Stepwise Laboratory Quality Improvement Process Towards Accreditation (SLIPTA) assessment in June 2013. During the accreditation assessment in September 2014, 25 minor nonconformities were identified and addressed. In March 2015, the NTRL received Portuguese Accreditation Board recognition of technical competency for fluorescence smear microscopy, and solid and liquid culture. The NTRL is the first laboratory in Mozambique to achieve ISO 15189 accreditation. Conclusions From our experience, accreditation was made possible by institutional commitment, strong laboratory leadership, staff motivation, adequate infrastructure and a comprehensive action plan. PMID:28879162

The Papers Printing Quality Complex Assessment Algorithm Development Taking into Account the Composition and Production Technological Features

NASA Astrophysics Data System (ADS)

Babakhanova, Kh A.; Varepo, L. G.; Nagornova, I. V.; Babluyk, E. B.; Kondratov, A. P.

2018-04-01

Paper is one of the printing system key components causing the high-quality printed products output. Providing the printing companies with the specified printing properties paper, while simultaneously increasing the paper products range and volume by means of the forecasting methods application and evaluation during the production process, is certainly a relevant problem. The paper presents the printing quality control algorithm taking into consideration the paper printing properties quality assessment depending on the manufacture technological features and composition variation. The information system including raw material and paper properties data and making possible pulp and paper enterprises to select paper composition optimal formulation is proposed taking into account the printing process procedure peculiarities of the paper manufacturing with specified printing properties.

Near-infrared Spectroscopy in the Brewing Industry.

PubMed

Sileoni, Valeria; Marconi, Ombretta; Perretti, Giuseppe

2015-01-01

This article offers an exhaustive description of the use of Near-Infrared (NIR) Spectroscopy in the brewing industry. This technique is widely used for quality control testing of raw materials, intermediates, and finished products, as well as process monitoring during malting and brewing. In particular, most of the reviewed works focus on the assessment of barley properties, aimed at quickly selecting the best barley varieties in order to produce a high-quality malt leading to high-quality beer. Various works concerning the use of NIR in the evaluation of raw materials, such as barley, malt, hop, and yeast, are also summarized here. The implementation of NIR sensors for the control of malting and brewing processes is also highlighted, as well as the use of NIR for quality assessment of the final product.

Quality Control and Peer Review of Data Sets: Mapping Data Archiving Processes to Data Publication Requirements

NASA Astrophysics Data System (ADS)

Mayernik, M. S.; Daniels, M.; Eaker, C.; Strand, G.; Williams, S. F.; Worley, S. J.

2012-12-01

Data sets exist within scientific research and knowledge networks as both technical and non-technical entities. Establishing the quality of data sets is a multi-faceted task that encompasses many automated and manual processes. Data sets have always been essential for science research, but now need to be more visible as first-class scholarly objects at national, international, and local levels. Many initiatives are establishing procedures to publish and curate data sets, as well as to promote professional rewards for researchers that collect, create, manage, and preserve data sets. Traditionally, research quality has been assessed by peer review of textual publications, e.g. journal articles, conference proceedings, and books. Citation indices then provide standard measures of productivity used to reward individuals for their peer-reviewed work. Whether a similar peer review process is appropriate for assessing and ensuring the quality of data sets remains as an open question. How does the traditional process of peer review apply to data sets? This presentation will describe current work being done at the National Center for Atmospheric Research (NCAR) in the context of the Peer REview for Publication & Accreditation of Research Data in the Earth sciences (PREPARDE) project. PREPARDE is assessing practices and processes for data peer review, with the goal of developing recommendations. NCAR data management teams perform various kinds of quality assessment and review of data sets prior to making them publicly available. The poster will investigate how notions of peer review relate to the types of data review already in place at NCAR. We highlight the data set characteristics and management/archiving processes that challenge the traditional peer review processes by using a number of questions as probes, including: Who is qualified to review data sets? What formal and informal documentation is necessary to allow someone outside of a research team to review a data set? What data set review can be done pre-publication, and what must be done post-publication? What components of the data sets review processes can be automated, and what components will always require human expertise and evaluation?

Characterization of Adipose Tissue Product Quality Using Measurements of Oxygen Consumption Rate.

PubMed

Suszynski, Thomas M; Sieber, David A; Mueller, Kathryn; Van Beek, Allen L; Cunningham, Bruce L; Kenkel, Jeffrey M

2018-03-14

Fat grafting is a common procedure in plastic surgery but associated with unpredictable graft retention. Adipose tissue (AT) "product" quality is affected by the methods used for harvest, processing and transfer, which vary widely amongst surgeons. Currently, there is no method available to accurately assess the quality of AT. In this study, we present a novel method for the assessment of AT product quality through direct measurements of oxygen consumption rate (OCR). OCR has exhibited potential in predicting outcomes following pancreatic islet transplant. Our study aim was to reapportion existing technology for its use with AT preparations and to confirm that these measurements are feasible. OCR was successfully measured for en bloc and postprocessed AT using a stirred microchamber system. OCR was then normalized to DNA content (OCR/DNA), which represents the AT product quality. Mean (±SE) OCR/DNA values for fresh en bloc and post-processed AT were 149.8 (± 9.1) and 61.1 (± 6.1) nmol/min/mg DNA, respectively. These preliminary data suggest that: (1) OCR and OCR/DNA measurements of AT harvested using conventional protocol are feasible; and (2) standard AT processing results in a decrease in overall AT product quality. OCR measurements of AT using existing technology can be done and enables accurate, real-time, quantitative assessment of the quality of AT product prior to transfer. The availability and further validation of this type of assay could enable optimization of fat grafting protocol by providing a tool for the more detailed study of procedural variables that affect AT product quality.

Manufacturing history of etanercept (Enbrel®): Consistency of product quality through major process revisions.

PubMed

Hassett, Brian; Singh, Ena; Mahgoub, Ehab; O'Brien, Julie; Vicik, Steven M; Fitzpatrick, Brian

2018-01-01

Etanercept (ETN) (Enbrel®) is a soluble protein that binds to, and specifically inhibits, tumor necrosis factor (TNF), a proinflammatory cytokine. ETN is synthesized in Chinese hamster ovary cells by recombinant DNA technology as a fusion protein, with a fully human TNFRII ectodomain linked to the Fc portion of human IgG1. Successful manufacture of biologics, such as ETN, requires sophisticated process and product understanding, as well as meticulous control of operations to maintain product consistency. The objective of this evaluation was to show that the product profile of ETN drug substance (DS) has been consistent over the course of production. Multiple orthogonal biochemical analyses, which included evaluation of attributes indicative of product purity, potency, and quality, were assessed on >2,000 batches of ETN from three sites of DS manufacture, during the period 1998-2015. Based on the key quality attributes of product purity (assessed by hydrophobic interaction chromatography HPLC), binding activity (to TNF by ELISA), potency (inhibition of TNF-induced apoptosis by cell-based bioassay) and quality (N-linked oligosaccharide map), we show that the integrity of ETN DS has remained consistent over time. This consistency was maintained through three major enhancements to the initial process of manufacturing that were supported by detailed comparability assessments, and approved by the European Medicines Agency. Examination of results for all major quality attributes for ETN DS indicates a highly consistent process for over 18 years and throughout changes to the manufacturing process, without affecting safety and efficacy, as demonstrated across a wide range of clinical trials of ETN in multiple inflammatory diseases.

[Maturity Levels of Quality and Risk Management at the University Hospital Schleswig-Holstein].

PubMed

Jussli-Melchers, Jill; Hilbert, Carsten; Jahnke, Iris; Wehkamp, Kai; Rogge, Annette; Freitag-Wolf, Sandra; Kahla-Witzsch, Heike A; Scholz, Jens; Petzina, Rainer

2018-05-16

Quality and risk management in hospitals are not only required by law but also for an optimal patient-centered and process-optimized patient care. To evaluate the maturity levels of quality and risk management at the University Hospital Schleswig-Holstein (UKSH), a structured analytical tool was developed for easy and efficient application. Four criteria concerning quality management - quality assurance (QS), critical incident reporting system (CIRS), complaint management (BM) and process management (PM) - were evaluated with a structured questionnaire. Self-assessment and external assessment were performed to classify the maturity levels at the UKSH (location Kiel and Lübeck). Every quality item was graded into four categories from "A" (fully implemented) to "D" (not implemented at all). First of all, an external assessment was initiated by the head of the department of quality and risk management. Thereafter, a self-assessment was performed by 46 clinical units of the UKSH. Discrepancies were resolved in a collegial dialogue. Based on these data, overall maturity levels were obtained for every clinical unit. The overall maturity level "A" was reached by three out of 46 (6.5%) clinical units. No unit was graded with maturity level "D". 50% out of all units reached level "B" and 43.5% level "C". The distribution of the four different quality criteria revealed a good implementation of complaint management (maturity levels "A" and "B" in 78.3%), whereas the levels for CIRS were "C" and "D" in 73.9%. Quality assurance and process management showed quite similar distributions for the levels of maturity "B" and "C" (87% QS; 91% PM). The structured analytical tool revealed maturity levels of 46 clinical units of the UKSH and defined the maturity levels of four relevant quality criteria (QS, CIRS, BM, PM). As a consequence, extensive procedures were implemented to raise the standard of quality and risk management. In future, maturity levels will be reevaluated every two years. This qualitative maturity level model enables in a simple and efficient way precise statements concerning presence, manifestation and development of quality and risk management. © Georg Thieme Verlag KG Stuttgart · New York.

European Society of Gynaecologic Oncology Quality Indicators for Advanced Ovarian Cancer Surgery.

PubMed

Querleu, Denis; Planchamp, François; Chiva, Luis; Fotopoulou, Christina; Barton, Desmond; Cibula, David; Aletti, Giovanni; Carinelli, Silvestro; Creutzberg, Carien; Davidson, Ben; Harter, Philip; Lundvall, Lene; Marth, Christian; Morice, Philippe; Rafii, Arash; Ray-Coquard, Isabelle; Rockall, Andrea; Sessa, Cristiana; van der Zee, Ate; Vergote, Ignace; du Bois, Andreas

2016-09-01

The surgical management of advanced ovarian cancer involves complex surgery. Implementation of a quality management program has a major impact on survival. The goal of this work was to develop a list of quality indicators (QIs) for advanced ovarian cancer surgery that can be used to audit and improve the clinical practice. This task has been carried out under the auspices of the European Society of Gynaecologic Oncology (ESGO). Quality indicators were based on scientific evidence and/or expert consensus. A 4-step evaluation process included a systematic literature search for the identification of potential QIs and the documentation of scientific evidence, physical meetings of an ad hoc multidisciplinarity International Development Group, an internal validation of the targets and scoring system, and an external review process involving physicians and patients. Ten structural, process, or outcome indicators were selected. Quality indicators 1 to 3 are related to achievement of complete cytoreduction, caseload in the center, training, and experience of the surgeon. Quality indicators 4 to 6 are related to the overall management, including active participation to clinical research, decision-making process within a structured multidisciplinary team, and preoperative workup. Quality indicator 7 addresses the high value of adequate perioperative management. Quality indicators 8 to 10 highlight the need of recording pertinent information relevant to improvement of quality. An ESGO-approved template for the operative report has been designed. Quality indicators were described using a structured format specifying what the indicator is measuring, measurability specifications, and targets. Each QI was associated with a score, and an assessment form was built. The ESGO quality criteria can be used for self-assessment, for institutional or governmental quality assurance programs, and for the certification of centers. Quality indicators and corresponding targets give practitioners and health administrators a quantitative basis for improving care and organizational processes in the surgical management of advanced ovarian cancer.

Standardized quality-assessment system to evaluate pressure ulcer care in the nursing home.

PubMed

Bates-Jensen, Barbara M; Cadogan, Mary; Jorge, Jennifer; Schnelle, John F

2003-09-01

To demonstrate reliability and feasibility of a standardized protocol to assess and score quality indicators relevant to pressure ulcer (PU) care processes in nursing homes (NHs). Descriptive. Eight NHs. One hundred ninety-one NH residents for whom the PU Resident Assessment Protocol of the Minimum Data Set was initiated. Nine quality indicators (two related to screening and prevention of PU, two focused on assessment, and five addressing management) were scored using medical record data, direct human observation, and wireless thigh monitor observation data. Feasibility and reliability of medical record, observation, and thigh monitor protocols were determined. The percentage of participants who passed each of the indicators, indicating care consistent with practice guidelines, ranged from 0% to 98% across all indicators. In general, participants in NHs passed fewer indicators and had more problems with medical record accuracy before a PU was detected (screening/prevention indicators) than they did once an ulcer was documented (assessment and management indicators). Reliability of the medical record protocol showed kappa statistics ranging from 0.689 to 1.00 and percentage agreement from 80% to 100%. Direct observation protocols yielded kappa statistics of 0.979 and 0.928. Thigh monitor protocols showed kappa statistics ranging from 0.609 to 0.842. Training was variable, with the observation protocol requiring 1 to 2 hours, medical records requiring joint review of 20 charts with average time to complete the review of 20 minutes, and the thigh monitor data requiring 1 week for training in data preparation and interpretation. The standardized quality assessment system generated scores for nine PU quality indicators with good reliability and provided explicit scoring rules that permit reproducible conclusions about PU care. The focus of the indicators on care processes that are under the control of NH staff made the protocol useful for external survey and internal quality improvement purposes, and the thigh monitor observational technology provided a method for monitoring repositioning care processes that were otherwise difficult to monitor and manage.

Processes to Preserve Spice and Herb Quality and Sensory Integrity During Pathogen Inactivation.

PubMed

Duncan, Susan E; Moberg, Kayla; Amin, Kemia N; Wright, Melissa; Newkirk, Jordan J; Ponder, Monica A; Acuff, Gary R; Dickson, James S

2017-05-01

Selected processing methods, demonstrated to be effective at reducing Salmonella, were assessed to determine if spice and herb quality was affected. Black peppercorn, cumin seed, oregano, and onion powder were irradiated to a target dose of 8 kGy. Two additional processes were examined for whole black peppercorns and cumin seeds: ethylene oxide (EtO) fumigation and vacuum assisted-steam (82.22 °C, 7.5 psia). Treated and untreated spices/herbs were compared (visual, odor) using sensory similarity testing protocols (α = 0.20; β = 0.05; proportion of discriminators: 20%) to determine if processing altered sensory quality. Analytical assessment of quality (color, water activity, and volatile chemistry) was completed. Irradiation did not alter visual or odor sensory quality of black peppercorn, cumin seed, or oregano but created differences in onion powder, which was lighter (higher L * ) and more red (higher a * ) in color, and resulted in nearly complete loss of measured volatile compounds. EtO processing did not create detectable odor or appearance differences in black peppercorn; however visual and odor sensory quality differences, supported by changes in color (higher b * ; lower L * ) and increased concentrations of most volatiles, were detected for cumin seeds. Steam processing of black peppercorn resulted in perceptible odor differences, supported by increased concentration of monoterpene volatiles and loss of all sesquiterpenes; only visual differences were noted for cumin seed. An important step in process validation is the verification that no effect is detectable from a sensory perspective. © 2017 The Authors. Journal of Food Science published by Wiley Periodicals, Inc. on behalf of Institute of Food Technologists.

Research on assessment and improvement method of remote sensing image reconstruction

NASA Astrophysics Data System (ADS)

Sun, Li; Hua, Nian; Yu, Yanbo; Zhao, Zhanping

2018-01-01

Remote sensing image quality assessment and improvement is an important part of image processing. Generally, the use of compressive sampling theory in remote sensing imaging system can compress images while sampling which can improve efficiency. A method of two-dimensional principal component analysis (2DPCA) is proposed to reconstruct the remote sensing image to improve the quality of the compressed image in this paper, which contain the useful information of image and can restrain the noise. Then, remote sensing image quality influence factors are analyzed, and the evaluation parameters for quantitative evaluation are introduced. On this basis, the quality of the reconstructed images is evaluated and the different factors influence on the reconstruction is analyzed, providing meaningful referential data for enhancing the quality of remote sensing images. The experiment results show that evaluation results fit human visual feature, and the method proposed have good application value in the field of remote sensing image processing.

Water quality and habitat conditions in upper Midwest streams relative to riparian vegetation and soil characteristics, August 1997 : study design, methods, and data

USGS Publications Warehouse

Sorenson, S.K.; Porter, S.D.; Akers, K.B.; Harris, M.A.; Kalkhoff, S.J.; Lee, K.E.; Roberts, L.; Terrio, P.J.

1999-01-01

Water-chemistry, biological, and habitat data were collected from 70 sites on Midwestern streams during August 1997 as part of an integrated, regional water-quality assessment by the U.S. Geological Survey National Water-Quality Assessment (NAWQA) Program. The study area includes the Corn Belt region of southern Minnesota, eastern Iowa, and west-central Illinois, one of the most intensive and productive agricultural regions of the world. The focus of the study was to evaluate the condition of woodedriparian zones and the influence of basin soildrainage characteristics on water quality and biological-community responses. This report includes a description of the study design and site-characterization process, sample-collection and processing methods, laboratory methods, quality-assurance procedures, and summaries of data on nutrients, herbicides and metabolites, stream productivity and respiration, biological communities, habitat conditions, and agriculturalchemical and land-use information.

Water-quality assessment of the Smith River drainage basin, California and Oregon

USGS Publications Warehouse

Iwatsubo, Rick T.; Washabaugh, Donna S.

1982-01-01

A water-quality assessment of the Smith River drainage basin was made to provide a summary of the water-quality conditions including known or potential water-quality problems. Results of the study showed that the water quality of the Smith River is excellent and generally meets the water-quality objectives for the beneficial uses identified by the California Regional Water Quality Control Board, North Coast Region. Known and potential problems related to water quality include: Sedimentation resulting from both natural erosional processes and land-use activities such as timber harvest, road construction, and mining that accelerate the erosional processes; bacterial contamination of surface and ground waters from inundated septic tanks and drainfields, and grazing activities; industrial spills which have resulted in fish kills and oil residues; high concetrations of iron in ground water; log and debris jams creating fish migration barriers; and pesticide and trace-element contamination from timber-harvest and mining activities, respectively. Future studies are needed to establish: (1) a sustained long-term monitoring program to provide a broad coverage of water-quality conditions in order to define long-term water-quality trends; and (2) interpretive studies to determine the source of known and potential water-quality problems. (USGS)

Measurement of Health Care Quality in Atopic Dermatitis - Development and Application of a Set of Quality Indicators.

PubMed

Steinke, S; Beikert, F C; Langenbruch, A; Fölster-Holst, R; Ring, J; Schmitt, J; Werfel, T; Hintzen, S; Franzke, N; Augustin, M

2018-05-15

Quality indicators are essential tools for the assessment of health care, in particular for guideline-based procedures. 1) Development of a set of indicators for the evaluation of process and outcomes quality in atopic dermatitis (AD) care. 2) Application of the indicators to a cross-sectional study and creation of a global process quality index. An expert committee consisting of 10 members of the German guideline group on atopic dermatitis condensed potential quality indicators to a final set of 5 outcomes quality and 12 process quality indicators using a Delphi panel. The outcomes quality and 7 resp. 8 process quality indicators were retrospectively applied to a nationwide study on 1,678 patients with atopic dermatitis (AtopicHealth). Each individual process quality indicator score was then summed up to a global index (ranges from 0 (no quality achieved) to 100 (full quality achieved)) displaying the quality of health care. In total, the global process quality index revealed a median value of 62.5 and did not or only slightly correlate to outcome indicators as the median SCORAD (SCORing Atopic Dermatitis; rp =0.08), Dermatology Life Quality Index (DLQI; rp = 0.256), and Patient Benefit Index (PBI; rp = -0.151). Process quality of AD care is moderate to good. The health care process quality index does not substantially correlate to the health status of AD patients measured by 5 different outcomes quality indicators. Further research should include the investigation of reliability, responsiveness, and feasibility of the proposed quality indicators for AD. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Strengthening the Assessment Trajectory: Engaging Educators in the Policy Process. Making a Measurable Difference: Case Studies from the High-Quality Assessment Project

ERIC Educational Resources Information Center

McClellan, Catherine; Snyder, Rebecca; Woods-Murphy, Maryann; Basset, Katherine

2018-01-01

Great teachers recognize great assessments. As policy and education leaders work to make sure state tests are measuring the problem-solving, writing, and critical-thinking skills students need for success, they should convene and rely on teachers to review test quality and help answer the question: Do the questions on our state test reflect…

Planning and Implementing Total Quality Management in the Royal Australian Air Force: A Multiple Case Study Analysis

DTIC Science & Technology

1990-09-01

change barriers, and necessary checks and balances built into processes. Furthermore, this assessment should address management system variables which...organisation’s 69 immediate product and their worklife . Focus must be maintained on improving RAAF processes. In addition to a quality committee structure as

Using Inspections to Improve the Quality of Product Documentation and Code.

ERIC Educational Resources Information Center

Zuchero, John

1995-01-01

Describes how, by adapting software inspections to assess documentation and code, technical writers can collaborate with development personnel, editors, and customers to dramatically improve both the quality of documentation and the very process of inspecting that documentation. Notes that the five steps involved in the inspection process are:…

Assessment Policy in Post-Apartheid South Africa: Challenges for Improving Education Quality and Learning

ERIC Educational Resources Information Center

Kanjee, Anil; Sayed, Yusuf

2013-01-01

The South African education system has witnessed significant changes since 1994 when the democratically elected government began the process of dismantling the inherited apartheid order. The primary focus of the transformation process was to address the twin imperative of equity and quality in education, particularly for the historically…

Functional evaluations in the monitoring of the river ecosystem processes: the Adige River as a case stu.

PubMed

Braioni, M G; Salmoiraghi, G; Bracco, F; Villani, M; Braioni, A; Girelli, L

2002-03-12

A model of analysis and environmental evaluation was applied to 11 stretches of the Adige River, where an innovative procedure was carried out to interpret ecological results. Within each stretch, the most suitable methods were used to assess the quality and processes of flood plains, banks, water column, bed, and interstitial environment. Indices were applied to evaluate the wild state and ecological quality of the banks (wild state index, buffer strip index) and the landscape quality of wide areas of the fluvial corridor (environmental landscape index). The biotic components (i.e., macrozoobenthos, phytoplankton and zooplankton, interstitial hyporheic fauna, vegetation in the riparian areas) were analysed by both quantitative and functional methods (as productivity, litter--processing and colonisation). The results achieved were then translated into five classes of functional evaluation. These qualitative assessments have thus preserved a high level of precision and sensitivity in quantifying both the quality of the environmental conditions and the integrity of the ecosystem processes. Read together with urban planning data, they indicate what actions are needed to restore and rehabilitate the Adige River corridor.

WE-A-BRC-00: The Quality Gap

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Quality and safety in healthcare are inextricably linked. There are compelling data that link poor quality radiation therapy to inferior patient survival. Radiation Oncology clinical trial protocol deviations often involve incorrect target volume delineation or dosing, akin to radiotherapy incidents which also often involve partial geometric miss or improper radiation dosing. When patients with radiation protocol variations are compared to those without significant protocol variations, clinical outcome is negatively impacted. Traditionally, quality assurance in radiation oncology has been driven largely by new technological advances, and safety improvement has been driven by reactive responses to past system failures and prescriptive mandatesmore » recommended by professional organizations and promulgated by regulators. Prescriptive approaches to quality and safety alone often do not address the huge variety of process and technique used in radiation oncology. Risk-based assessments of radiotherapy processes provide a mechanism to enhance quality and safety, both for new and for established techniques. It is imperative that we explore such a paradigm shift at this time, when expectations from patients as well as providers are rising while available resources are falling. There is much we can learn from our past experiences to be applied towards the new risk-based assessments. Learning Objectives: Understand the impact of clinical and technical quality on outcomes Understand the importance of quality care in radiation oncology Learn to assess the impact of quality on clinical outcomes D. Followill, NIH Grant CA180803.« less

Multiscale visual quality assessment for cluster analysis with self-organizing maps

NASA Astrophysics Data System (ADS)

Bernard, Jürgen; von Landesberger, Tatiana; Bremm, Sebastian; Schreck, Tobias

2011-01-01

Cluster analysis is an important data mining technique for analyzing large amounts of data, reducing many objects to a limited number of clusters. Cluster visualization techniques aim at supporting the user in better understanding the characteristics and relationships among the found clusters. While promising approaches to visual cluster analysis already exist, these usually fall short of incorporating the quality of the obtained clustering results. However, due to the nature of the clustering process, quality plays an important aspect, as for most practical data sets, typically many different clusterings are possible. Being aware of clustering quality is important to judge the expressiveness of a given cluster visualization, or to adjust the clustering process with refined parameters, among others. In this work, we present an encompassing suite of visual tools for quality assessment of an important visual cluster algorithm, namely, the Self-Organizing Map (SOM) technique. We define, measure, and visualize the notion of SOM cluster quality along a hierarchy of cluster abstractions. The quality abstractions range from simple scalar-valued quality scores up to the structural comparison of a given SOM clustering with output of additional supportive clustering methods. The suite of methods allows the user to assess the SOM quality on the appropriate abstraction level, and arrive at improved clustering results. We implement our tools in an integrated system, apply it on experimental data sets, and show its applicability.

Deepening our understanding of quality improvement in Europe (DUQuE): overview of a study of hospital quality management in seven countries

PubMed Central

Secanell, Mariona; Groene, Oliver; Arah, Onyebuchi A.; Lopez, Maria Andrée; Kutryba, Basia; Pfaff, Holger; Klazinga, Niek; Wagner, Cordula; Kristensen, Solvejg; Bartels, Paul Daniel; Garel, Pascal; Bruneau, Charles; Escoval, Ana; França, Margarida; Mora, Nuria; Suñol, Rosa; Klazinga, N; Kringos, DS; Lopez, MA; Secanell, M; Sunol, R; Vallejo, P; Bartels, P; Kristensen, S; Michel, P; Saillour-Glenisson, F; Vlcek, F; Car, M; Jones, S; Klaus, E; Bottaro, S; Garel, P; Saluvan, M; Bruneau, C; Depaigne-Loth, A; Shaw, C; Hammer, A; Ommen, O; Pfaff, H; Groene, O; Botje, D; Wagner, C; Kutaj-Wasikowska, H; Kutryba, B; Escoval, A; Lívio, A; Eiras, M; Franca, M; Leite, I; Almeman, F; Kus, H; Ozturk, K; Mannion, R; Arah, OA; Chow, A; DerSarkissian, M; Thompson, CA; Wang, A; Thompson, A

2014-01-01

Introduction and Objective This paper provides an overview of the DUQuE (Deepening our Understanding of Quality Improvement in Europe) project, the first study across multiple countries of the European Union (EU) to assess relationships between quality management and patient outcomes at EU level. The paper describes the conceptual framework and methods applied, highlighting the novel features of this study. Design DUQuE was designed as a multi-level cross-sectional study with data collection at hospital, pathway, professional and patient level in eight countries. Setting and Participants We aimed to collect data for the assessment of hospital-wide constructs from up to 30 randomly selected hospitals in each country, and additional data at pathway and patient level in 12 of these 30. Main outcome measures A comprehensive conceptual framework was developed to account for the multiple levels that influence hospital performance and patient outcomes. We assessed hospital-specific constructs (organizational culture and professional involvement), clinical pathway constructs (the organization of care processes for acute myocardial infarction, stroke, hip fracture and deliveries), patient-specific processes and outcomes (clinical effectiveness, patient safety and patient experience) and external constructs that could modify hospital quality (external assessment and perceived external pressure). Results Data was gathered from 188 hospitals in 7 participating countries. The overall participation and response rate were between 75% and 100% for the assessed measures. Conclusions This is the first study assessing relation between quality management and patient outcomes at EU level. The study involved a large number of respondents and achieved high response rates. This work will serve to develop guidance in how to assess quality management and makes recommendations on the best ways to improve quality in healthcare for hospital stakeholders, payers, researchers, and policy makers throughout the EU. PMID:24671120

Neural image analysis in the process of quality assessment: domestic pig oocytes

NASA Astrophysics Data System (ADS)

Boniecki, P.; Przybył, J.; Kuzimska, T.; Mueller, W.; Raba, B.; Lewicki, A.; Przybył, K.; Zaborowicz, M.; Koszela, K.

2014-04-01

The questions related to quality classification of animal oocytes are explored by numerous scientific and research centres. This research is important, particularly in the context of improving the breeding value of farm animals. The methods leading to the stimulation of normal development of a larger number of fertilised animal oocytes in extracorporeal conditions are of special importance. Growing interest in the techniques of supported reproduction resulted in searching for new, increasingly effective methods for quality assessment of mammalian gametes and embryos. Progress in the production of in vitro animal embryos in fact depends on proper classification of obtained oocytes. The aim of this paper was the development of an original method for quality assessment of oocytes, performed on the basis of their graphical presentation in the form of microscopic digital images. The classification process was implemented on the basis of the information coded in the form of microphotographic pictures of the oocytes of domestic pig, using the modern methods of neural image analysis.

Simultaneous Analysis and Quality Assurance for Diffusion Tensor Imaging

PubMed Central

Lauzon, Carolyn B.; Asman, Andrew J.; Esparza, Michael L.; Burns, Scott S.; Fan, Qiuyun; Gao, Yurui; Anderson, Adam W.; Davis, Nicole; Cutting, Laurie E.; Landman, Bennett A.

2013-01-01

Diffusion tensor imaging (DTI) enables non-invasive, cyto-architectural mapping of in vivo tissue microarchitecture through voxel-wise mathematical modeling of multiple magnetic resonance imaging (MRI) acquisitions, each differently sensitized to water diffusion. DTI computations are fundamentally estimation processes and are sensitive to noise and artifacts. Despite widespread adoption in the neuroimaging community, maintaining consistent DTI data quality remains challenging given the propensity for patient motion, artifacts associated with fast imaging techniques, and the possibility of hardware changes/failures. Furthermore, the quantity of data acquired per voxel, the non-linear estimation process, and numerous potential use cases complicate traditional visual data inspection approaches. Currently, quality inspection of DTI data has relied on visual inspection and individual processing in DTI analysis software programs (e.g. DTIPrep, DTI-studio). However, recent advances in applied statistical methods have yielded several different metrics to assess noise level, artifact propensity, quality of tensor fit, variance of estimated measures, and bias in estimated measures. To date, these metrics have been largely studied in isolation. Herein, we select complementary metrics for integration into an automatic DTI analysis and quality assurance pipeline. The pipeline completes in 24 hours, stores statistical outputs, and produces a graphical summary quality analysis (QA) report. We assess the utility of this streamlined approach for empirical quality assessment on 608 DTI datasets from pediatric neuroimaging studies. The efficiency and accuracy of quality analysis using the proposed pipeline is compared with quality analysis based on visual inspection. The unified pipeline is found to save a statistically significant amount of time (over 70%) while improving the consistency of QA between a DTI expert and a pool of research associates. Projection of QA metrics to a low dimensional manifold reveal qualitative, but clear, QA-study associations and suggest that automated outlier/anomaly detection would be feasible. PMID:23637895

Simultaneous analysis and quality assurance for diffusion tensor imaging.

PubMed

Lauzon, Carolyn B; Asman, Andrew J; Esparza, Michael L; Burns, Scott S; Fan, Qiuyun; Gao, Yurui; Anderson, Adam W; Davis, Nicole; Cutting, Laurie E; Landman, Bennett A

2013-01-01

Diffusion tensor imaging (DTI) enables non-invasive, cyto-architectural mapping of in vivo tissue microarchitecture through voxel-wise mathematical modeling of multiple magnetic resonance imaging (MRI) acquisitions, each differently sensitized to water diffusion. DTI computations are fundamentally estimation processes and are sensitive to noise and artifacts. Despite widespread adoption in the neuroimaging community, maintaining consistent DTI data quality remains challenging given the propensity for patient motion, artifacts associated with fast imaging techniques, and the possibility of hardware changes/failures. Furthermore, the quantity of data acquired per voxel, the non-linear estimation process, and numerous potential use cases complicate traditional visual data inspection approaches. Currently, quality inspection of DTI data has relied on visual inspection and individual processing in DTI analysis software programs (e.g. DTIPrep, DTI-studio). However, recent advances in applied statistical methods have yielded several different metrics to assess noise level, artifact propensity, quality of tensor fit, variance of estimated measures, and bias in estimated measures. To date, these metrics have been largely studied in isolation. Herein, we select complementary metrics for integration into an automatic DTI analysis and quality assurance pipeline. The pipeline completes in 24 hours, stores statistical outputs, and produces a graphical summary quality analysis (QA) report. We assess the utility of this streamlined approach for empirical quality assessment on 608 DTI datasets from pediatric neuroimaging studies. The efficiency and accuracy of quality analysis using the proposed pipeline is compared with quality analysis based on visual inspection. The unified pipeline is found to save a statistically significant amount of time (over 70%) while improving the consistency of QA between a DTI expert and a pool of research associates. Projection of QA metrics to a low dimensional manifold reveal qualitative, but clear, QA-study associations and suggest that automated outlier/anomaly detection would be feasible.

Developing a Deep Brain Stimulation Neuromodulation Network for Parkinson Disease, Essential Tremor, and Dystonia: Report of a Quality Improvement Project

PubMed Central

O’Suilleabhain, Padraig E.; Sanghera, Manjit; Patel, Neepa; Khemani, Pravin; Lacritz, Laura H.; Chitnis, Shilpa; Whitworth, Louis A.; Dewey, Richard B.

2016-01-01

Objective To develop a process to improve patient outcomes from deep brain stimulation (DBS) surgery for Parkinson disease (PD), essential tremor (ET), and dystonia. Methods We employed standard quality improvement methodology using the Plan-Do-Study-Act process to improve patient selection, surgical DBS lead implantation, postoperative programming, and ongoing assessment of patient outcomes. Results The result of this quality improvement process was the development of a neuromodulation network. The key aspect of this program is rigorous patient assessment of both motor and non-motor outcomes tracked longitudinally using a REDCap database. We describe how this information is used to identify problems and to initiate Plan-Do-Study-Act cycles to address them. Preliminary outcomes data is presented for the cohort of PD and ET patients who have received surgery since the creation of the neuromodulation network. Conclusions Careful outcomes tracking is essential to ensure quality in a complex therapeutic endeavor like DBS surgery for movement disorders. The REDCap database system is well suited to store outcomes data for the purpose of ongoing quality assurance monitoring. PMID:27711133

Developing a Deep Brain Stimulation Neuromodulation Network for Parkinson Disease, Essential Tremor, and Dystonia: Report of a Quality Improvement Project.

PubMed

Dewey, Richard B; O'Suilleabhain, Padraig E; Sanghera, Manjit; Patel, Neepa; Khemani, Pravin; Lacritz, Laura H; Chitnis, Shilpa; Whitworth, Louis A; Dewey, Richard B

2016-01-01

To develop a process to improve patient outcomes from deep brain stimulation (DBS) surgery for Parkinson disease (PD), essential tremor (ET), and dystonia. We employed standard quality improvement methodology using the Plan-Do-Study-Act process to improve patient selection, surgical DBS lead implantation, postoperative programming, and ongoing assessment of patient outcomes. The result of this quality improvement process was the development of a neuromodulation network. The key aspect of this program is rigorous patient assessment of both motor and non-motor outcomes tracked longitudinally using a REDCap database. We describe how this information is used to identify problems and to initiate Plan-Do-Study-Act cycles to address them. Preliminary outcomes data is presented for the cohort of PD and ET patients who have received surgery since the creation of the neuromodulation network. Careful outcomes tracking is essential to ensure quality in a complex therapeutic endeavor like DBS surgery for movement disorders. The REDCap database system is well suited to store outcomes data for the purpose of ongoing quality assurance monitoring.

Do team processes really have an effect on clinical performance? A systematic literature review.

PubMed

Schmutz, J; Manser, T

2013-04-01

There is a growing literature on the relationship between team processes and clinical performance. The purpose of this review is to summarize these articles and examine the impact of team process behaviours on clinical performance. We conducted a literature search in five major databases. Inclusion criteria were: English peer-reviewed papers published between January 2001 and May 2012, which showed or tried to show (i) a statistical relationship of a team process variable and clinical performance or (ii) an improvement of a performance variable through a team process intervention. Study quality was assessed using predefined quality indicators. For every study, we calculated the relevant effect sizes. We included 28 studies in the review, seven of which were intervention studies. Every study reported at least one significant relationship between team processes or an intervention and performance. Also, some non-significant effects were reported. Most of the reported effect sizes were large or medium. The study quality ranged from medium to high. The studies are highly diverse regarding the specific team process behaviours investigated and also regarding the methods used. However, they suggest that team process behaviours do influence clinical performance and that training results in increased performance. Future research should rely on existing theoretical frameworks, valid, and reliable methods to assess processes such as teamwork or coordination and focus on the development of adequate tools to assess process performance, linking them with outcomes in the clinical setting.

Guidelines for collecting and processing samples of stream bed sediment for analysis of trace elements and organic contaminants for the National Water-Quality Assessment Program

USGS Publications Warehouse

Shelton, Larry R.; Capel, Paul D.

1994-01-01

A major component of the U.S. Geological Survey's National Water-Quality Assessment program is to assess the occurrence and distribution of trace elements and organic contaminants in streams. The first phase of the strategy for the assessment is to analyze samples of bed sediments from depositional zones. Fine-grained particles deposited in these zones are natural accumulators of trace elements and hydrophobic organic compounds. For the information to be comparable among studies in many different parts of the Nation, strategies for selecting stream sites and depositional zones are critical. Fine-grained surficial sediments are obtained from several depositional zones within a stream reach and composited to yield a sample representing average conditions. Sample collection and processing must be done consistently and by procedures specifically designed to separate the fine material into fractions that yield uncontaminated samples for trace-level analytes in the laboratory. Special coring samplers and other instruments made of Teflon are used for collection. Samples are processed through a 2.0-millimeter stainless-steel mesh sieve for organic contaminate analysis and a 63-micrometer nylon-cloth sieve for trace-element analysis. Quality assurance is maintained by strict collection and processing procedures, duplicate samplings, and a rigid cleaning procedure.

MASQOT: a method for cDNA microarray spot quality control

PubMed Central

Bylesjö, Max; Eriksson, Daniel; Sjödin, Andreas; Sjöström, Michael; Jansson, Stefan; Antti, Henrik; Trygg, Johan

2005-01-01

Background cDNA microarray technology has emerged as a major player in the parallel detection of biomolecules, but still suffers from fundamental technical problems. Identifying and removing unreliable data is crucial to prevent the risk of receiving illusive analysis results. Visual assessment of spot quality is still a common procedure, despite the time-consuming work of manually inspecting spots in the range of hundreds of thousands or more. Results A novel methodology for cDNA microarray spot quality control is outlined. Multivariate discriminant analysis was used to assess spot quality based on existing and novel descriptors. The presented methodology displays high reproducibility and was found superior in identifying unreliable data compared to other evaluated methodologies. Conclusion The proposed methodology for cDNA microarray spot quality control generates non-discrete values of spot quality which can be utilized as weights in subsequent analysis procedures as well as to discard spots of undesired quality using the suggested threshold values. The MASQOT approach provides a consistent assessment of spot quality and can be considered an alternative to the labor-intensive manual quality assessment process. PMID:16223442

Redox processes and water quality of selected principal aquifer systems

USGS Publications Warehouse

McMahon, P.B.; Chapelle, F.H.

2008-01-01

Reduction/oxidation (redox) conditions in 15 principal aquifer (PA) systems of the United States, and their impact on several water quality issues, were assessed from a large data base collected by the National Water-Quality Assessment Program of the USGS. The logic of these assessments was based on the observed ecological succession of electron acceptors such as dissolved oxygen, nitrate, and sulfate and threshold concentrations of these substrates needed to support active microbial metabolism. Similarly, the utilization of solid-phase electron acceptors such as Mn(IV) and Fe(III) is indicated by the production of dissolved manganese and iron. An internally consistent set of threshold concentration criteria was developed and applied to a large data set of 1692 water samples from the PAs to assess ambient redox conditions. The indicated redox conditions then were related to the occurrence of selected natural (arsenic) and anthropogenic (nitrate and volatile organic compounds) contaminants in ground water. For the natural and anthropogenic contaminants assessed in this study, considering redox conditions as defined by this framework of redox indicator species and threshold concentrations explained many water quality trends observed at a regional scale. An important finding of this study was that samples indicating mixed redox processes provide information on redox heterogeneity that is useful for assessing common water quality issues. Given the interpretive power of the redox framework and given that it is relatively inexpensive and easy to measure the chemical parameters included in the framework, those parameters should be included in routine water quality monitoring programs whenever possible.

Quality of health care and the need for assessment.

PubMed

Bosse, G; Ngoli, B; Leshabari, M T; Külker, R; Dämmrich, T; Abels, W; Breuer, J P; Kersten, R; Spies, C

2011-09-01

In many hospitals of developing countries quality of care is below the expected standard to maintain patient safety. In 2006, health care experts from Tanzania and Germany collaborated on a set of indicators to be used as a hospital performance assessment tool. The aim of this study was to introduce this tool and check its feasibility for use in a Tanzanian regional hospital. Within the hospital, independent observers assessed quantitatively structural quality and the performance of health care encounter using an itemized scale from 0 (0%) to 2 (100%) for each defined item. Outcome parameters were taken from the annual hospital report. In addition, semi-qualitative interviews with staff and patients were held to a) assess staff knowledge of the treatment guidelines published by the Tanzanian Ministry of Health and Social Welfare (MoHSW), b) assess attitudes and user motivation and c) authenticate the quantitative findings in a mixed-method triangulation approach. Structural quality in maternity was at 75% of the expected standard, while process quality ranged from 36% (Care of the newborn with APGAR score < 4) to 47% (normal delivery procedure). Staff knowledge ranged between 64% and 87% with low motivation and commitment given as contributing factors. Outcome (maternal mortality) was 481/100,000 live births with an infant mortality rate of 10%. The tool appeared to be feasible and effective in judging care quality. It provides a model for continuous quality improvement. Motivation of health care workers, a strong determinant of care process quality, might be improved by strengthening internal factors in health facilities. For conclusive validation, further studies using the tool must be conducted with larger numbers of institutions.

A literature review of quantitative indicators to measure the quality of labor and delivery care.

PubMed

Tripathi, Vandana

2016-02-01

Strengthening measurement of the quality of labor and delivery (L&D) care in low-resource countries requires an understanding of existing approaches. To identify quantitative indicators of L&D care quality and assess gaps in indicators. PubMed, CINAHL Plus, and Embase databases were searched for research published in English between January 1, 1990, and October 31, 2013, using structured terms. Studies describing indicators for L&D care quality assessment were included. Those whose abstracts contained inclusion criteria underwent full-text review. Study characteristics, including indicator selection and data sources, were extracted via a standard spreadsheet. The structured search identified 1224 studies. After abstract and full-text review, 477 were included in the analysis. Most studies selected indicators by using literature review, clinical guidelines, or expert panels. Few indicators were empirically validated; most studies relied on medical record review to measure indicators. Many quantitative indicators have been used to measure L&D care quality, but few have been validated beyond expert opinion. There has been limited use of clinical observation in quality assessment of care processes. The findings suggest the need for validated, efficient consensus indicators of the quality of L&D care processes, particularly in low-resource countries. Copyright © 2015 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Academic Achievement Standards and Quality Assurance

ERIC Educational Resources Information Center

Sadler, D. Royce

2017-01-01

Quality assurance processes have been applied to many aspects of higher education, including teaching, learning and assessment. At least in the latter domain, quality assurance needs its fundamental tenets critically scrutinised. A common but inadequate approach has been to identify and promote learning environment changes "likely to…

A systematic review of human factors and ergonomics (HFE)-based healthcare system redesign for quality of care and patient safety.

PubMed

Xie, Anping; Carayon, Pascale

2015-01-01

Healthcare systems need to be redesigned to provide care that is safe, effective and efficient, and meets the multiple needs of patients. This systematic review examines how human factors and ergonomics (HFE) is applied to redesign healthcare work systems and processes and improve quality and safety of care. We identified 12 projects representing 23 studies and addressing different physical, cognitive and organisational HFE issues in a variety of healthcare systems and care settings. Some evidence exists for the effectiveness of HFE-based healthcare system redesign in improving process and outcome measures of quality and safety of care. We assessed risk of bias in 16 studies reporting the impact of HFE-based healthcare system redesign and found varying quality across studies. Future research should further assess the impact of HFE on quality and safety of care, and clearly define the mechanisms by which HFE-based system redesign can improve quality and safety of care.

[Development of methods and instruments for external quality assurance in inpatient parent-child rehabilitation and prevention].

PubMed

Neuderth, S; Lukasczik, M; Musekamp, G; Gerlich, C; Saupe-Heide, M; Löbmann, R; Vogel, H

2013-02-01

There so far is no standardized program for external quality assurance in inpatient parent-child prevention and rehabilitation in Germany. Therefore, instruments and methods of external quality assurance were developed and evaluated on behalf of the federal-level health insurance institutions. On the level of structure quality, a modular questionnaire for assessing structural features of rehabilitation/prevention centers, basic and allocation criteria as well as a checklist for visitations were developed. Structural data were collected in a nationwide survey of parent-child prevention and rehabilitation centers. Process and outcome quality data were collected in n=38 centers. Process quality was assessed using multiple methods (process-related structural features, case-related routine documentation, and incident-related patient questionnaires). Outcome quality was measured via patient questionnaires (n=1 799 patients). We used a multi-level modelling approach by adjusting relevant confounders on institutional and patient levels. The methods, instruments and analyzing procedures developed for measuring quality on the level of structure, processes and outcomes were adjusted in cooperation with all relevant stakeholders. Results are exemplarily presented for all quality assurance tools. For most of the risk-adjusted outcome parameters, we found no significant differences between institutions. For the first time, a comprehensive, standardized and generally applicable set of methods and instruments for routine use in comparative quality measurement of inpatient parent-child prevention and rehabilitation is available. However, it should be considered that the very heterogeneous field of family-oriented measures can not be covered entirely by an external quality assurance program. Therefore, methods and instruments have to be adapted continuously to the specifics of this area of health care and to new developments. © Georg Thieme Verlag KG Stuttgart · New York.

Nurse Reported Quality of Care: A Measure of Hospital Quality

PubMed Central

McHugh, Matthew D.; Stimpfel, Amy Witkoski

2013-01-01

As the primary providers of round-the-clock bedside care, nurses are well positioned to report on hospital quality of care. Researchers have not examined how nurses’ reports of quality correspond with standard process or outcomes measures of quality. We assess the validity of evaluating hospital quality by aggregating hospital nurses’ responses to a single item that asks them to report on quality of care. We found that a 10% increment in the proportion of nurses reporting excellent quality of care was associated with lower odds of mortality and failure to rescue; greater patient satisfaction; and higher composite process of care scores for acute myocardial infarction, pneumonia, and surgical patients. Nurse reported quality of care is a useful indicator of hospital performance. PMID:22911102

Acoustic assessment of wood quality of raw forest materials : a path to increased profitability

Treesearch

Xiping Wang; Peter Carter; Robert J. Ross; Brian K. Brashaw

2007-01-01

Assessment of the quality of raw wood materials has become a crucial issue in the operational value chain as forestry and the wood processing industry are increasingly under economic pressure to maximize extracted value. A significant effort has been devoted toward developing robust nondestructive evaluation (NDE) technologies capable of predicting the intrinsic wood...

A Quantitative Approach to Assessment of Work-Based Learning Outcomes: An Urban Planning Application

ERIC Educational Resources Information Center

Freestone, Robert; Williams, Peter; Thompson, Susan; Trembath, Kerry

2007-01-01

Assessing student perceptions and opinions of their university education is now standard in quality assurance processes for learning and teaching. In Australia, the Course Experience Questionnaire (CEQ) has been institutionalised as a national survey of graduand opinion and is used as the key indicator of tertiary teaching quality. A little-used…

Assessing and Increasing Staff Preference for Job Tasks Using Concurrent-Chains Schedules and Probabilistic Outcomes

ERIC Educational Resources Information Center

Reed, Derek D.; DiGennaro Reed, Florence D.; Campisano, Natalie; Lacourse, Kristen; Azulay, Richard L.

2012-01-01

The assessment and improvement of staff members' subjective valuation of nonpreferred work tasks may be one way to increase the quality of staff members' work life. The Task Enjoyment Motivation Protocol (Green, Reid, Passante, & Canipe, 2008) provides a process for supervisors to identify the aversive qualities of nonpreferred job tasks.…

The NCC project: A quality management perspective

NASA Technical Reports Server (NTRS)

Lee, Raymond H.

1993-01-01

The Network Control Center (NCC) Project introduced the concept of total quality management (TQM) in mid-1990. The CSC project team established a program which focused on continuous process improvement in software development methodology and consistent deliveries of high quality software products for the NCC. The vision of the TQM program was to produce error free software. Specific goals were established to allow continuing assessment of the progress toward meeting the overall quality objectives. The total quality environment, now a part of the NCC Project culture, has become the foundation for continuous process improvement and has resulted in the consistent delivery of quality software products over the last three years.

Assessing tomorrow's learners: in competency-based education only a radically different holistic method of assessment will work. Six things we could forget.

PubMed

Schuwirth, Lambert; Ash, Julie

2013-07-01

In this paper we are challenging six traditional notions about assessment that are unhelpful when designing 'assessment for learning'-programmes for competency-based education. We are arguing for the following: Reductionism is not the only way to assure rigour in high-stakes assessment; holistic judgements can be equally rigorous. Combining results of assessment parts only because they are of the same format (like different stations in an OSCE) is often not defensible; instead there must be a logically justifiable combination. Numbers describe the quality of the assessment. Therefore, manipulating the numbers is usually not the best way to improve its quality. Not every assessment moment needs to be a decision moment, disconnecting both makes combining summative and formative functions of assessment easier. Standardisation is not the only route to equity. Especially with diverse student groups tailoring is more equitable than standardisation. The most important element to standardise is the quality of the process and not the process itself. Finally, most assessment is too much focussed on detecting deficiencies and not on valuing individual student differences. In competency-based education--especially with a focus on learner orientation--this 'deficiency-model' is not as well aligned as a 'differences-model'.

Q-SEA – a tool for quality assessment of ethics analyses conducted as part of health technology assessments

PubMed Central

Scott, Anna Mae; Hofmann, Björn; Gutiérrez-Ibarluzea, Iñaki; Bakke Lysdahl, Kristin; Sandman, Lars; Bombard, Yvonne

2017-01-01

Introduction: Assessment of ethics issues is an important part of health technology assessments (HTA). However, in terms of existence of quality assessment tools, ethics for HTA is methodologically underdeveloped in comparison to other areas of HTA, such as clinical or cost effectiveness. Objective: To methodologically advance ethics for HTA by: (1) proposing and elaborating Q-SEA, the first instrument for quality assessment of ethics analyses, and (2) applying Q-SEA to a sample systematic review of ethics for HTA, in order to illustrate and facilitate its use. Methods: To develop a list of items for the Q-SEA instrument, we systematically reviewed the literature on methodology in ethics for HTA, reviewed HTA organizations’ websites, and solicited views from 32 experts in the field of ethics for HTA at two 2-day workshops. We subsequently refined Q-SEA through its application to an ethics analysis conducted for HTA. Results: Q-SEA instrument consists of two domains – the process domain and the output domain. The process domain consists of 5 elements: research question, literature search, inclusion/exclusion criteria, perspective, and ethics framework. The output domain consists of 5 elements: completeness, bias, implications, conceptual clarification, and conflicting values. Conclusion: Q-SEA is the first instrument for quality assessment of ethics analyses in HTA. Further refinements to the instrument to enhance its usability continue. PMID:28326147

High Throughput Multispectral Image Processing with Applications in Food Science.

PubMed

Tsakanikas, Panagiotis; Pavlidis, Dimitris; Nychas, George-John

2015-01-01

Recently, machine vision is gaining attention in food science as well as in food industry concerning food quality assessment and monitoring. Into the framework of implementation of Process Analytical Technology (PAT) in the food industry, image processing can be used not only in estimation and even prediction of food quality but also in detection of adulteration. Towards these applications on food science, we present here a novel methodology for automated image analysis of several kinds of food products e.g. meat, vanilla crème and table olives, so as to increase objectivity, data reproducibility, low cost information extraction and faster quality assessment, without human intervention. Image processing's outcome will be propagated to the downstream analysis. The developed multispectral image processing method is based on unsupervised machine learning approach (Gaussian Mixture Models) and a novel unsupervised scheme of spectral band selection for segmentation process optimization. Through the evaluation we prove its efficiency and robustness against the currently available semi-manual software, showing that the developed method is a high throughput approach appropriate for massive data extraction from food samples.

Research on Holographic Evaluation of Service Quality in Power Data Network

NASA Astrophysics Data System (ADS)

Wei, Chen; Jing, Tao; Ji, Yutong

2018-01-01

With the rapid development of power data network, the continuous development of the Power data application service system, more and more service systems are being put into operation. Following this, the higher requirements for network quality and service quality are raised, in the actual process for the network operation and maintenance. This paper describes the electricity network and data network services status. A holographic assessment model was presented to achieve a comprehensive intelligence assessment on the power data network and quality of service in the operation and maintenance on the power data network. This evaluation method avoids the problems caused by traditional means which performs a single assessment of network performance quality. This intelligent Evaluation method can improve the efficiency of network operation and maintenance guarantee the quality of real-time service in the power data network..

GEOSPATIAL QA

EPA Science Inventory

Geospatial Science is increasingly becoming an important tool in making Agency decisions. Quality Control and Quality Assurance are required to be integrated during the planning, implementation and assessment of geospatial databases, processes and products. In order to ensure Age...

39 CFR 775.2 - Policy.

Code of Federal Regulations, 2010 CFR

2010-07-01

... quality of the human environment. (e) Use the NEPA process to identify and assess reasonable alternatives... practicable means to protect, restore, and enhance the quality of the human environment. (g) Reduce paperwork. (h) Reduce delay. ...

39 CFR 775.2 - Policy.

Code of Federal Regulations, 2011 CFR

2011-07-01

... quality of the human environment. (e) Use the NEPA process to identify and assess reasonable alternatives... practicable means to protect, restore, and enhance the quality of the human environment. (g) Reduce paperwork. (h) Reduce delay. ...

Nonprofit hospitals' approach to community health needs assessment.

PubMed

Pennel, Cara L; McLeroy, Kenneth R; Burdine, James N; Matarrita-Cascante, David

2015-03-01

We sought a better understanding of how nonprofit hospitals are fulfilling the community health needs assessment (CHNA) provision of the 2010 Patient Protection and Affordable Care Act to conduct CHNAs and develop CHNA and implementation strategies reports. Through an Internet search of an estimated 179 nonprofit hospitals in Texas conducted between December 1, 2013, and January 5, 2014, we identified and reviewed 95 CHNA and implementation strategies reports. We evaluated and scored reports with specific criteria. We analyzed hospital-related and other report characteristics to understand relationships with report quality. There was wide-ranging diversity in CHNA approaches and report quality. Consultant-led CHNA processes and collaboration with local health departments were associated with higher-quality reports. At the time of this study, the Internal Revenue Service had not yet issued the final regulations for the CHNA requirement. This provides an opportunity to strengthen the CHNA guidance for the final regulations, clarify the purpose of the assessment and planning process and reports, and better align assessment and planning activities through a public health framework.

Application of Quality by Design to the characterization of the cell culture process of an Fc-Fusion protein.

PubMed

Rouiller, Yolande; Solacroup, Thomas; Deparis, Véronique; Barbafieri, Marco; Gleixner, Ralf; Broly, Hervé; Eon-Duval, Alex

2012-06-01

The production bioreactor step of an Fc-Fusion protein manufacturing cell culture process was characterized following Quality by Design principles. Using scientific knowledge derived from the literature and process knowledge gathered during development studies and manufacturing to support clinical trials, potential critical and key process parameters with a possible impact on product quality and process performance, respectively, were determined during a risk assessment exercise. The identified process parameters were evaluated using a design of experiment approach. The regression models generated from the data allowed characterizing the impact of the identified process parameters on quality attributes. The main parameters having an impact on product titer were pH and dissolved oxygen, while those having the highest impact on process- and product-related impurities and variants were pH and culture duration. The models derived from characterization studies were used to define the cell culture process design space. The design space limits were set in such a way as to ensure that the drug substance material would consistently have the desired quality. Copyright © 2012 Elsevier B.V. All rights reserved.

Air Pollution Data for Model Evaluation and Application

EPA Science Inventory

One objective of designing an air pollution monitoring network is to obtain data for evaluating air quality models that are used in the air quality management process and scientific discovery.^1.2 A common use is to relate emissions to air quality, including assessing ...

[Interventions to improve quality of life in oncological patients].

PubMed

Klinkhammer-Schalke, Monika; Steinger, Brunhilde; Koller, Michael; Lindberg, Patricia

2017-05-01

The assessment of quality of life is a central aspect in the current debate in support groups, certified cancer centres, benefit assessment, and also in palliative care. Accordingly, quality of life has become an essential part of clinical trials for more than two decades. But most of the time results are presented in a descriptive manner without any concrete therapeutic consequences for the improvement of quality of life. Likewise, there are no uniform recommendations for considering quality of life data in the decision-making process. Therefore, a guide with recommendations for the assessment of quality of life in trials has been developed. Its implementation is illustrated by a complex intervention for a targeted diagnosis and therapy of quality of life in patients with breast cancer or colorectal cancer. The basis is a standardised quality of life assessment and the presentation of results in an intelligible fashion as well as the close collaboration of all healthcare providers to create regional network structures for the targeted support of patients in both the inpatient and outpatient sector. Copyright © 2017. Published by Elsevier GmbH.

Implementation of a hospital-based quality assessment program for rectal cancer.

PubMed

Hendren, Samantha; McKeown, Ellen; Morris, Arden M; Wong, Sandra L; Oerline, Mary; Poe, Lyndia; Campbell, Darrell A; Birkmeyer, Nancy J

2014-05-01

Quality improvement programs in Europe have had a markedly beneficial effect on the processes and outcomes of rectal cancer care. The quality of rectal cancer care in the United States is not as well understood, and scalable quality improvement programs have not been developed. The purpose of this article is to describe the implementation of a hospital-based quality assessment program for rectal cancer, targeting both community and academic hospitals. We recruited 10 hospitals from a surgical quality improvement organization. Nurse reviewers were trained to abstract rectal cancer data from hospital medical records, and abstracts were assessed for accuracy. We conducted two surveys to assess the training program and limitations of the data abstraction. We validated data completeness and accuracy by comparing hospital medical record and tumor registry data. Nine of 10 hospitals successfully performed abstractions with ≥ 90% accuracy. Experienced nurse reviewers were challenged by the technical details in operative and pathology reports. Although most variables had less than 10% missing data, outpatient testing information was lacking from some hospitals' inpatient records. This implementation project yielded a final quality assessment program consisting of 20 medical records variables and 11 tumor registry variables. An innovative program linking tumor registry data to quality-improvement data for rectal cancer quality assessment was successfully implemented in 10 hospitals. This data platform and training program can serve as a template for other organizations that are interested in assessing and improving the quality of rectal cancer care. Copyright © 2014 by American Society of Clinical Oncology.

Image quality assessment using deep convolutional networks

NASA Astrophysics Data System (ADS)

Li, Yezhou; Ye, Xiang; Li, Yong

2017-12-01

This paper proposes a method of accurately assessing image quality without a reference image by using a deep convolutional neural network. Existing training based methods usually utilize a compact set of linear filters for learning features of images captured by different sensors to assess their quality. These methods may not be able to learn the semantic features that are intimately related with the features used in human subject assessment. Observing this drawback, this work proposes training a deep convolutional neural network (CNN) with labelled images for image quality assessment. The ReLU in the CNN allows non-linear transformations for extracting high-level image features, providing a more reliable assessment of image quality than linear filters. To enable the neural network to take images of any arbitrary size as input, the spatial pyramid pooling (SPP) is introduced connecting the top convolutional layer and the fully-connected layer. In addition, the SPP makes the CNN robust to object deformations to a certain extent. The proposed method taking an image as input carries out an end-to-end learning process, and outputs the quality of the image. It is tested on public datasets. Experimental results show that it outperforms existing methods by a large margin and can accurately assess the image quality on images taken by different sensors of varying sizes.

Learning Evaluation: blending quality improvement and implementation research methods to study healthcare innovations.

PubMed

Balasubramanian, Bijal A; Cohen, Deborah J; Davis, Melinda M; Gunn, Rose; Dickinson, L Miriam; Miller, William L; Crabtree, Benjamin F; Stange, Kurt C

2015-03-10

In healthcare change interventions, on-the-ground learning about the implementation process is often lost because of a primary focus on outcome improvements. This paper describes the Learning Evaluation, a methodological approach that blends quality improvement and implementation research methods to study healthcare innovations. Learning Evaluation is an approach to multi-organization assessment. Qualitative and quantitative data are collected to conduct real-time assessment of implementation processes while also assessing changes in context, facilitating quality improvement using run charts and audit and feedback, and generating transportable lessons. Five principles are the foundation of this approach: (1) gather data to describe changes made by healthcare organizations and how changes are implemented; (2) collect process and outcome data relevant to healthcare organizations and to the research team; (3) assess multi-level contextual factors that affect implementation, process, outcome, and transportability; (4) assist healthcare organizations in using data for continuous quality improvement; and (5) operationalize common measurement strategies to generate transportable results. Learning Evaluation principles are applied across organizations by the following: (1) establishing a detailed understanding of the baseline implementation plan; (2) identifying target populations and tracking relevant process measures; (3) collecting and analyzing real-time quantitative and qualitative data on important contextual factors; (4) synthesizing data and emerging findings and sharing with stakeholders on an ongoing basis; and (5) harmonizing and fostering learning from process and outcome data. Application to a multi-site program focused on primary care and behavioral health integration shows the feasibility and utility of Learning Evaluation for generating real-time insights into evolving implementation processes. Learning Evaluation generates systematic and rigorous cross-organizational findings about implementing healthcare innovations while also enhancing organizational capacity and accelerating translation of findings by facilitating continuous learning within individual sites. Researchers evaluating change initiatives and healthcare organizations implementing improvement initiatives may benefit from a Learning Evaluation approach.

Use of mechanistic simulations as a quantitative risk-ranking tool within the quality by design framework.

PubMed

Stocker, Elena; Toschkoff, Gregor; Sacher, Stephan; Khinast, Johannes G

2014-11-20

The purpose of this study is to evaluate the use of computer simulations for generating quantitative knowledge as a basis for risk ranking and mechanistic process understanding, as required by ICH Q9 on quality risk management systems. In this specific publication, the main focus is the demonstration of a risk assessment workflow, including a computer simulation for the generation of mechanistic understanding of active tablet coating in a pan coater. Process parameter screening studies are statistically planned under consideration of impacts on a potentially critical quality attribute, i.e., coating mass uniformity. Based on computer simulation data the process failure mode and effects analysis of the risk factors is performed. This results in a quantitative criticality assessment of process parameters and the risk priority evaluation of failure modes. The factor for a quantitative reassessment of the criticality and risk priority is the coefficient of variation, which represents the coating mass uniformity. The major conclusion drawn from this work is a successful demonstration of the integration of computer simulation in the risk management workflow leading to an objective and quantitative risk assessment. Copyright © 2014. Published by Elsevier B.V.

Sigma metrics as a tool for evaluating the performance of internal quality control in a clinical chemistry laboratory.

PubMed

Kumar, B Vinodh; Mohan, Thuthi

2018-01-01

Six Sigma is one of the most popular quality management system tools employed for process improvement. The Six Sigma methods are usually applied when the outcome of the process can be measured. This study was done to assess the performance of individual biochemical parameters on a Sigma Scale by calculating the sigma metrics for individual parameters and to follow the Westgard guidelines for appropriate Westgard rules and levels of internal quality control (IQC) that needs to be processed to improve target analyte performance based on the sigma metrics. This is a retrospective study, and data required for the study were extracted between July 2015 and June 2016 from a Secondary Care Government Hospital, Chennai. The data obtained for the study are IQC - coefficient of variation percentage and External Quality Assurance Scheme (EQAS) - Bias% for 16 biochemical parameters. For the level 1 IQC, four analytes (alkaline phosphatase, magnesium, triglyceride, and high-density lipoprotein-cholesterol) showed an ideal performance of ≥6 sigma level, five analytes (urea, total bilirubin, albumin, cholesterol, and potassium) showed an average performance of <3 sigma level and for level 2 IQCs, same four analytes of level 1 showed a performance of ≥6 sigma level, and four analytes (urea, albumin, cholesterol, and potassium) showed an average performance of <3 sigma level. For all analytes <6 sigma level, the quality goal index (QGI) was <0.8 indicating the area requiring improvement to be imprecision except cholesterol whose QGI >1.2 indicated inaccuracy. This study shows that sigma metrics is a good quality tool to assess the analytical performance of a clinical chemistry laboratory. Thus, sigma metric analysis provides a benchmark for the laboratory to design a protocol for IQC, address poor assay performance, and assess the efficiency of existing laboratory processes.

A COMPARISON OF VECTOR AND RASTER GIS METHODS FOR CALCULATING LANDSCAPE METRICS USED IN ENVIRONMENTAL ASSESSMENTS

EPA Science Inventory

GIS-based measurements that combine native raster and native vector data are commonly used to assess environmental quality. Most of these measurements can be calculated using either raster or vector data formats and processing methods. Raster processes are more commonly used beca...

[Risk management--a new aspect of quality assessment in intensive care medicine: first results of an analysis of the DIVI's interdisciplinary quality assessment research group].

PubMed

Stiletto, R; Röthke, M; Schäfer, E; Lefering, R; Waydhas, Ch

2006-10-01

Patient security has become one of the major aspects of clinical management in recent years. The crucial point in research was focused on malpractice. In contradiction to the economic process in non medical fields, the analysis of errors during the in-patient treatment time was neglected. Patient risk management can be defined as a structured procedure in a clinical unit with the aim to reduce harmful events. A risk point model was created based on a Delphi process and founded on the DIVI data register. The risk point model was evaluated in clinically working ICU departments participating in the register data base. The results of the risk point evaluation will be integrated in the next data base update. This might be a step to improve the reliability of the register to measure quality assessment in the ICU.

If you can't measure it- you can't change it - a longitudinal study on improving quality of care in hospitals and health centers in rural Kenya.

PubMed

Marx, Michael; Nitschke, Christine; Nafula, Maureen; Nangami, Mabel; Brodowski, Marc; Marx, Irmgard; Prytherch, Helen; Kandie, Charles; Omogi, Irene; Paul-Fariborz, Friederike; Szecsenyi, Joachim

2018-04-05

The Kenyan Ministry of Health- Department of Standards and Regulations sought to operationalize the Kenya Quality Assurance Model for Health. To this end an integrated quality management system based on validated indicators derived from the Kenya Quality Model for Health (KQMH) was developed and adapted to the area of Reproductive and Maternal and Neonatal Health, implemented and analysed. An integrated quality management (QM) approach was developed based on European Practice Assessment (EPA) modified to the Kenyan context. It relies on a multi-perspective, multifaceted and repeated indicator based assessment, covering the 6 World Health Organization (WHO) building blocks. The adaptation process made use of a ten step modified RAND/UCLA appropriateness Method. To measure the 303 structure, process, outcome indicators five data collection tools were developed: surveys for patients and staff, a self-assessment, facilitator assessment, a manager interview guide. The assessment process was supported by a specially developed software (VISOTOOL®) that allows detailed feedback to facility staff, benchmarking and facilitates improvement plans. A longitudinal study design was used with 10 facilities (6 hospitals; 4 Health centers) selected out of 36 applications. Data was summarized using means and standard deviations (SDs). Categorical data was presented as frequency counts and percentages. A baseline assessment (T1) was carried out, a reassessment (T2) after 1.5 years. Results from the first and second assessment after a relatively short period of 1.5 years of improvement activities are striking, in particular in the domain 'Quality and Safety' (20.02%; p < 0.0001) with the dimensions: use of clinical guidelines (34,18%; p < 0.0336); Infection control (23,61%; p < 0.0001). Marked improvements were found in the domains 'Clinical Care' (10.08%; p = 0.0108), 'Management' (13.10%: p < 0.0001), 'Interface In/out-patients' (13.87%; p = 0.0246), and in total (14.64%; p < 0.0001). Exemplarily drilling down the domain 'clinical care' significant improvements were observed in the dimensions 'Antenatal care' (26.84%; p = 0.0059) and 'Survivors of gender-based violence' (11.20%; p = 0.0092). The least marked changes or even a -not significant- decline of some was found in the dimensions 'delivery' and 'postnatal care'. This comprehensive quality improvement approach breathes life into the process of collecting data for indicators and creates ownership among users and providers of health services. It offers a reflection on the relevance of evidence-based quality improvement for health system strengthening and has the potential to lay a solid ground for further certification and accreditation.

[Environmental quality assessment of regional agro-ecosystem in Loess Plateau].

PubMed

Wang, Limei; Meng, Fanping; Zheng, Jiyong; Wang, Zhonglin

2004-03-01

Based on the detection and analysis of the contamination status of agro-ecosystem with apple-crops intercropping as the dominant cropping model in Loess Plateau, the individual factor and comprehensive environmental quality were assessed by multilevel fuzzy synthetic evaluation model, analytical hierarchy process(AHP), and improved standard weight deciding method. The results showed that the quality of soil, water and agricultural products was grade I, the social economical environmental quality was grade II, the ecological environmental quality was grade III, and the comprehensive environmental quality was grade I. The regional agro-ecosystem dominated by apple-crops intercropping was not the best model for the ecological benefits, but had the better social economical benefits.

Atmospheric Boundary Layer Wind Data During the Period January 1, 1998 Through January 31, 1999 at the Dallas-Fort Worth Airport. Volume 1; Quality Assessment

NASA Technical Reports Server (NTRS)

Zak, J. Allen; Rodgers, William G., Jr.

2000-01-01

The quality of the Aircraft Vortex Spacing System (AVOSS) is critically dependent on representative wind profiles in the atmospheric boundary layer. These winds observed from a number of sensor systems around the Dallas-Fort Worth airport were combined into single vertical wind profiles by an algorithm developed and implemented by MIT Lincoln Laboratory. This process, called the AVOSS Winds Analysis System (AWAS), is used by AVOSS for wake corridor predictions. During times when AWAS solutions were available, the quality of the resultant wind profiles and variance was judged from a series of plots combining all sensor observations and AWAS profiles during the period 1200 to 0400 UTC daily. First, input data was evaluated for continuity and consistency from criteria established. Next, the degree of agreement among all wind sensor systems was noted and cases of disagreement identified. Finally, the resultant AWAS solution was compared to the quality-assessed input data. When profiles differed by a specified amount from valid sensor consensus winds, times and altitudes were flagged. Volume one documents the process and quality of input sensor data. Volume two documents the data processing/sorting process and provides the resultant flagged files.

Measuring the value of process improvement initiatives in a preoperative assessment center using time-driven activity-based costing.

PubMed

French, Katy E; Albright, Heidi W; Frenzel, John C; Incalcaterra, James R; Rubio, Augustin C; Jones, Jessica F; Feeley, Thomas W

2013-12-01

The value and impact of process improvement initiatives are difficult to quantify. We describe the use of time-driven activity-based costing (TDABC) in a clinical setting to quantify the value of process improvements in terms of cost, time and personnel resources. Difficulty in identifying and measuring the cost savings of process improvement initiatives in a Preoperative Assessment Center (PAC). Use TDABC to measure the value of process improvement initiatives that reduce the costs of performing a preoperative assessment while maintaining the quality of the assessment. Apply the principles of TDABC in a PAC to measure the value, from baseline, of two phases of performance improvement initiatives and determine the impact of each implementation in terms of cost, time and efficiency. Through two rounds of performance improvements, we quantified an overall reduction in time spent by patient and personnel of 33% that resulted in a 46% reduction in the costs of providing care in the center. The performance improvements resulted in a 17% decrease in the total number of full time equivalents (FTE's) needed to staff the center and a 19% increase in the numbers of patients assessed in the center. Quality of care, as assessed by the rate of cancellations on the day of surgery, was not adversely impacted by the process improvements. © 2013 Published by Elsevier Inc.

A new multimodal interactive way of subjective scoring of 3D video quality of experience

NASA Astrophysics Data System (ADS)

Kim, Taewan; Lee, Kwanghyun; Lee, Sanghoon; Bovik, Alan C.

2014-03-01

People that watch today's 3D visual programs, such as 3D cinema, 3D TV and 3D games, experience wide and dynamically varying ranges of 3D visual immersion and 3D quality of experience (QoE). It is necessary to be able to deploy reliable methodologies that measure each viewers subjective experience. We propose a new methodology that we call Multimodal Interactive Continuous Scoring of Quality (MICSQ). MICSQ is composed of a device interaction process between the 3D display and a separate device (PC, tablet, etc.) used as an assessment tool, and a human interaction process between the subject(s) and the device. The scoring process is multimodal, using aural and tactile cues to help engage and focus the subject(s) on their tasks. Moreover, the wireless device interaction process makes it possible for multiple subjects to assess 3D QoE simultaneously in a large space such as a movie theater, and at di®erent visual angles and distances.

Dynamic Assessment of Water Quality Based on a Variable Fuzzy Pattern Recognition Model

PubMed Central

Xu, Shiguo; Wang, Tianxiang; Hu, Suduan

2015-01-01

Water quality assessment is an important foundation of water resource protection and is affected by many indicators. The dynamic and fuzzy changes of water quality lead to problems for proper assessment. This paper explores a method which is in accordance with the water quality changes. The proposed method is based on the variable fuzzy pattern recognition (VFPR) model and combines the analytic hierarchy process (AHP) model with the entropy weight (EW) method. The proposed method was applied to dynamically assess the water quality of Biliuhe Reservoir (Dailan, China). The results show that the water quality level is between levels 2 and 3 and worse in August or September, caused by the increasing water temperature and rainfall. Weights and methods are compared and random errors of the values of indicators are analyzed. It is concluded that the proposed method has advantages of dynamism, fuzzification and stability by considering the interval influence of multiple indicators and using the average level characteristic values of four models as results. PMID:25689998

Dynamic assessment of water quality based on a variable fuzzy pattern recognition model.

PubMed

Xu, Shiguo; Wang, Tianxiang; Hu, Suduan

2015-02-16

Water quality assessment is an important foundation of water resource protection and is affected by many indicators. The dynamic and fuzzy changes of water quality lead to problems for proper assessment. This paper explores a method which is in accordance with the water quality changes. The proposed method is based on the variable fuzzy pattern recognition (VFPR) model and combines the analytic hierarchy process (AHP) model with the entropy weight (EW) method. The proposed method was applied to dynamically assess the water quality of Biliuhe Reservoir (Dailan, China). The results show that the water quality level is between levels 2 and 3 and worse in August or September, caused by the increasing water temperature and rainfall. Weights and methods are compared and random errors of the values of indicators are analyzed. It is concluded that the proposed method has advantages of dynamism, fuzzification and stability by considering the interval influence of multiple indicators and using the average level characteristic values of four models as results.

A method for evaluating treatment quality using in vivo EPID dosimetry and statistical process control in radiation therapy.

PubMed

Fuangrod, Todsaporn; Greer, Peter B; Simpson, John; Zwan, Benjamin J; Middleton, Richard H

2017-03-13

Purpose Due to increasing complexity, modern radiotherapy techniques require comprehensive quality assurance (QA) programmes, that to date generally focus on the pre-treatment stage. The purpose of this paper is to provide a method for an individual patient treatment QA evaluation and identification of a "quality gap" for continuous quality improvement. Design/methodology/approach A statistical process control (SPC) was applied to evaluate treatment delivery using in vivo electronic portal imaging device (EPID) dosimetry. A moving range control chart was constructed to monitor the individual patient treatment performance based on a control limit generated from initial data of 90 intensity-modulated radiotherapy (IMRT) and ten volumetric-modulated arc therapy (VMAT) patient deliveries. A process capability index was used to evaluate the continuing treatment quality based on three quality classes: treatment type-specific, treatment linac-specific, and body site-specific. Findings The determined control limits were 62.5 and 70.0 per cent of the χ pass-rate for IMRT and VMAT deliveries, respectively. In total, 14 patients were selected for a pilot study the results of which showed that about 1 per cent of all treatments contained errors relating to unexpected anatomical changes between treatment fractions. Both rectum and pelvis cancer treatments demonstrated process capability indices were less than 1, indicating the potential for quality improvement and hence may benefit from further assessment. Research limitations/implications The study relied on the application of in vivo EPID dosimetry for patients treated at the specific centre. Sampling patients for generating the control limits were limited to 100 patients. Whilst the quantitative results are specific to the clinical techniques and equipment used, the described method is generally applicable to IMRT and VMAT treatment QA. Whilst more work is required to determine the level of clinical significance, the authors have demonstrated the capability of the method for both treatment specific QA and continuing quality improvement. Practical implications The proposed method is a valuable tool for assessing the accuracy of treatment delivery whilst also improving treatment quality and patient safety. Originality/value Assessing in vivo EPID dosimetry with SPC can be used to improve the quality of radiation treatment for cancer patients.

External quality-assurance programs managed by the U.S. Geological Survey in support of the National Atmospheric Deposition Program/National Trends Network

USGS Publications Warehouse

Latysh, Natalie E.; Wetherbee, Gregory A.

2005-01-01

The U.S. Geological Survey, Branch of Quality Systems, operates the external quality-assurance programs for the National Atmospheric Deposition Program/National Trends Network (NADP/NTN). Beginning in 1978, six different programs have been implemented?the intersite-comparison program, the blind-audit program, the sample-handling evaluation program, the field-audit program, the interlaboratory-comparison program, and the collocated-sampler program. Each program was designed to measure error contributed by specific components in the data-collection process. The intersite-comparison program, which was discontinued in 2004, was designed to assess the accuracy and reliability of field pH and specific-conductance measurements made by site operators. The blind-audit and sample-handling evaluation programs, which also were discontinued in 2002 and 2004, respectively, assessed contamination that may result from sampling equipment and routine handling and processing of the wet-deposition samples. The field-audit program assesses the effects of sample handling, processing, and field exposure. The interlaboratory-comparison program evaluates bias and precision of analytical results produced by the contract laboratory for NADP, the Illinois State Water Survey, Central Analytical Laboratory, and compares its performance with the performance of international laboratories. The collocated-sampler program assesses the overall precision of wet-deposition data collected by NADP/NTN. This report documents historical operations and the operating procedures for each of these external quality-assurance programs. USGS quality-assurance information allows NADP/NTN data users to discern between actual environmental trends and inherent measurement variability.

Studies in Ambulatory Care Quality Assessment in the Indian Health Service. Volume II: Appraisal of System Performance.

ERIC Educational Resources Information Center

Nutting, Paul A.; And Others

Six Indian Health Service (IHS) units, chosen in a non-random manner, were evaluated via a quality assessment methodology currently under development by the IHS Office of Research and Development. A set of seven health problems (tracers) was selected to represent major health problems, and clinical algorithms (process maps) were constructed for…

A Comparative Study of Paper-and-Pen versus Computer-Delivered Assessment Modes on Students' Writing Quality: A Singapore Study

ERIC Educational Resources Information Center

Cheung, Yin Ling

2016-01-01

Much research has been conducted to investigate the quality of writing and high-level revisions in word processing-assisted and pen-and-paper writing modes. Studies that address cognitive aspects, such as experience and comfort with computers, by which students compose essays during writing assessments have remained relatively unexplored. To fill…

A Goal Orientation Analysis of Teachers' Motivations to Participate in the School Self-Assessment Processes of a Quality Assurance System in Chile

ERIC Educational Resources Information Center

Montecinos, Carmen; Madrid, Romina; Fernández, María Beatriz; Ahumada, Luis

2014-01-01

The current study examined the goal orientations that could be inferred from how teachers from six municipal schools in Chile described their understandings, emotions, and behaviors during their participation in the assessment phase of the School Management Quality Assurance System. Content analysis of focus group interview transcripts evidenced…

[A systemic risk analysis of hospital management processes by medical employees--an effective basis for improving patient safety].

PubMed

Sobottka, Stephan B; Eberlein-Gonska, Maria; Schackert, Gabriele; Töpfer, Armin

2009-01-01

Due to the knowledge gap that exists between patients and health care staff the quality of medical treatment usually cannot be assessed securely by patients. For an optimization of safety in treatment-related processes of medical care, the medical staff needs to be actively involved in preventive and proactive quality management. Using voluntary, confidential and non-punitive systematic employee surveys, vulnerable topics and areas in patient care revealing preventable risks can be identified at an early stage. Preventive measures to continuously optimize treatment quality can be defined by creating a risk portfolio and a priority list of vulnerable topics. Whereas critical incident reporting systems are suitable for continuous risk assessment by detecting safety-relevant single events, employee surveys permit to conduct a systematic risk analysis of all treatment-related processes of patient care at any given point in time.

28 CFR 91.51 - Policy.

Code of Federal Regulations, 2012 CFR

2012-07-01

... affect the quality of the human environment. (4) Use the NEPA process to identify and assess reasonable alternatives to proposed actions that will avoid or minimize adverse effects of these actions upon the quality of the human environment. (5) Use all practicable means to restore and enhance the quality of the...

28 CFR 91.51 - Policy.

Code of Federal Regulations, 2013 CFR

2013-07-01

... affect the quality of the human environment. (4) Use the NEPA process to identify and assess reasonable alternatives to proposed actions that will avoid or minimize adverse effects of these actions upon the quality of the human environment. (5) Use all practicable means to restore and enhance the quality of the...

28 CFR 91.51 - Policy.

Code of Federal Regulations, 2011 CFR

2011-07-01

... affect the quality of the human environment. (4) Use the NEPA process to identify and assess reasonable alternatives to proposed actions that will avoid or minimize adverse effects of these actions upon the quality of the human environment. (5) Use all practicable means to restore and enhance the quality of the...

28 CFR 91.51 - Policy.

Code of Federal Regulations, 2010 CFR

2010-07-01

... affect the quality of the human environment. (4) Use the NEPA process to identify and assess reasonable alternatives to proposed actions that will avoid or minimize adverse effects of these actions upon the quality of the human environment. (5) Use all practicable means to restore and enhance the quality of the...

28 CFR 91.51 - Policy.

Code of Federal Regulations, 2014 CFR

2014-07-01

... affect the quality of the human environment. (4) Use the NEPA process to identify and assess reasonable alternatives to proposed actions that will avoid or minimize adverse effects of these actions upon the quality of the human environment. (5) Use all practicable means to restore and enhance the quality of the...

Quality Assurance in Sub-Saharan Africa

ERIC Educational Resources Information Center

Materu, Peter; Righetti, Petra

2010-01-01

This article assesses the status and practice of higher education quality assurance in sub-Saharan Africa, focusing on degree-granting tertiary institutions. A main finding is that structured national-level quality assurance processes in African higher education are a very recent phenomenon and that most countries face major capacity constraints.…

Single-Site, Results-Level Evaluation of Quality Awareness Training.

ERIC Educational Resources Information Center

Murray, Brian; Raffaele, Gary C.

1997-01-01

An interrupted time-series design pooling 6 12-year series evaluated the long-term effects of a quality training intervention in a factory. Training positively affected quality of goods and dollar utility. Production process was an important contextual factor in assessing the effect size of the intervention. (SK)

Information theoretical assessment of visual communication with subband coding

NASA Astrophysics Data System (ADS)

Rahman, Zia-ur; Fales, Carl L.; Huck, Friedrich O.

1994-09-01

A well-designed visual communication channel is one which transmits the most information about a radiance field with the fewest artifacts. The role of image processing, encoding and restoration is to improve the quality of visual communication channels by minimizing the error in the transmitted data. Conventionally this role has been analyzed strictly in the digital domain neglecting the effects of image-gathering and image-display devices on the quality of the image. This results in the design of a visual communication channel which is `suboptimal.' We propose an end-to-end assessment of the imaging process which incorporates the influences of these devices in the design of the encoder and the restoration process. This assessment combines Shannon's communication theory with Wiener's restoration filter and with the critical design factors of the image gathering and display devices, thus providing the metrics needed to quantify and optimize the end-to-end performance of the visual communication channel. Results show that the design of the image-gathering device plays a significant role in determining the quality of the visual communication channel and in designing the analysis filters for subband encoding.

Hospital quality measures: are process indicators associated with hospital standardized mortality ratios in French acute care hospitals?

PubMed

Ngantcha, Marcus; Le-Pogam, Marie-Annick; Calmus, Sophie; Grenier, Catherine; Evrard, Isabelle; Lamarche-Vadel, Agathe; Rey, Grégoire

2017-08-22

Results of associations between process and mortality indicators, both used for the external assessment of hospital care quality or public reporting, differ strongly across studies. However, most of those studies were conducted in North America or United Kingdom. Providing new evidence based on French data could fuel the international debate on quality of care indicators and help inform French policy-makers. The objective of our study was to explore whether optimal care delivery in French hospitals as assessed by their Hospital Process Indicators (HPIs) is associated with low Hospital Standardized Mortality Ratios (HSMRs). The French National Authority for Health (HAS) routinely collects for each hospital located in France, a set of mandatory HPIs. Five HPIs were selected among the process indicators collected by the HAS in 2009. They were measured using random samples of 60 to 80 medical records from inpatients admitted between January 1st, 2009 and December 31, 2009 in respect with some selection criteria. HSMRs were estimated at 30, 60 and 90 days post-admission (dpa) using administrative health data extracted from the national health insurance information system (SNIIR-AM) which covers 77% of the French population. Associations between HPIs and HSMRs were assessed by Poisson regression models corrected for measurement errors with a simulation-extrapolation (SIMEX) method. Most associations studied were not statistically significant. Only two process indicators were found associated with HSMRs. Completeness and quality of anesthetic records was negatively associated with 30 dpa HSMR (0.72 [0.52-0.99]). Early detection of nutritional disorders was negatively associated with all HSMRs: 30 dpa HSMR (0.71 [0.54-0.95]), 60 dpa HSMR (0.51 [0.39-0.67]) and 90 dpa HSMR (0.52 [0.40-0.68]). In absence of gold standard of quality of care measurement, the limited number of associations suggested to drive in-depth improvements in order to better determine associations between process and mortality indicators. A smart utilization of both process and outcomes indicators is mandatory to capture aspects of the hospital quality of care complexity.

Clinical evaluation of reducing acquisition time on single-photon emission computed tomography image quality using proprietary resolution recovery software.

PubMed

Aldridge, Matthew D; Waddington, Wendy W; Dickson, John C; Prakash, Vineet; Ell, Peter J; Bomanji, Jamshed B

2013-11-01

A three-dimensional model-based resolution recovery (RR) reconstruction algorithm that compensates for collimator-detector response, resulting in an improvement in reconstructed spatial resolution and signal-to-noise ratio of single-photon emission computed tomography (SPECT) images, was tested. The software is said to retain image quality even with reduced acquisition time. Clinically, any improvement in patient throughput without loss of quality is to be welcomed. Furthermore, future restrictions in radiotracer supplies may add value to this type of data analysis. The aims of this study were to assess improvement in image quality using the software and to evaluate the potential of performing reduced time acquisitions for bone and parathyroid SPECT applications. Data acquisition was performed using the local standard SPECT/CT protocols for 99mTc-hydroxymethylene diphosphonate bone and 99mTc-methoxyisobutylisonitrile parathyroid SPECT imaging. The principal modification applied was the acquisition of an eight-frame gated data set acquired using an ECG simulator with a fixed signal as the trigger. This had the effect of partitioning the data such that the effect of reduced time acquisitions could be assessed without conferring additional scanning time on the patient. The set of summed data sets was then independently reconstructed using the RR software to permit a blinded assessment of the effect of acquired counts upon reconstructed image quality as adjudged by three experienced observers. Data sets reconstructed with the RR software were compared with the local standard processing protocols; filtered back-projection and ordered-subset expectation-maximization. Thirty SPECT studies were assessed (20 bone and 10 parathyroid). The images reconstructed with the RR algorithm showed improved image quality for both full-time and half-time acquisitions over local current processing protocols (P<0.05). The RR algorithm improved image quality compared with local processing protocols and has been introduced into routine clinical use. SPECT acquisitions are now acquired at half of the time previously required. The method of binning the data can be applied to any other camera system to evaluate the reduction in acquisition time for similar processes. The potential for dose reduction is also inherent with this approach.

[Certification assessment and quality and risk management].

PubMed

Papin-Morardet, Maud

2018-03-01

Organised by the French National Health Authority (HAS), certification is an external assessment process which is obligatory for all public and private health facilities, whatever their size or activity. The aim is to independently evaluate the quality of the health care provision of hospitals and clinics in France. This article looks at the investigation methods and the procedure used during the certification assessment of Henri Mondor University Hospitals in 2016. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Structured implicit review: a new method for monitoring nursing care quality.

PubMed

Pearson, M L; Lee, J L; Chang, B L; Elliott, M; Kahn, K L; Rubenstein, L V

2000-11-01

Nurses' independent decisions about assessment, treatment, and nursing interventions for hospitalized patients are important determinants of quality of care. Physician peer implicit review of medical records has been central to Medicare quality management and is considered the gold standard for reviewing physician care, but peer implicit review of nursing processes of care has not received similar attention. The objective of this study was to develop and evaluate nurse structured implicit review (SIR) methods. We developed SIR instruments for rating the quality of inpatient nursing care for congestive heart failure (CHF) and cerebrovascular accident (CVA). Nurse reviewers used the SIR form to rate a nationally representative sample of randomly selected medical records for each disease from 297 acute care hospitals in 5 states (collected by the RAND-HCFA Prospective Payment System study). The study subjects were elderly Medicare inpatients with CHF (n = 291) or CVA (n = 283). We developed and tested scales reflecting domains of nursing process, evaluated interrater and interitem reliability, and assessed the extent to which items and scales predicted overall ratings of the quality of nursing care. Interrater reliability for 14 of 16 scales (CHF) or 10 of 16 scales (CVA) was > or = 0.40. Interitem reliability was > 0.80 for all but 1 scale (both diseases). Functional Assessment, Physical Assessment, and Medication Tracking ratings were the strongest predictors of overall nursing quality ratings (P < 0.001 for each). Nurse peer review with SIR has adequate interrater and excellent scale reliabilities and can be a valuable tool for assessing nurse performance.

Using quality assessment tools to critically appraise ageing research: a guide for clinicians.

PubMed

Harrison, Jennifer Kirsty; Reid, James; Quinn, Terry J; Shenkin, Susan Deborah

2017-05-01

Evidence based medicine tells us that we should not accept published research at face value. Even research from established teams published in the highest impact journals can have methodological flaws, biases and limited generalisability. The critical appraisal of research studies can seem daunting, but tools are available to make the process easier for the non-specialist. Understanding the language and process of quality assessment is essential when considering or conducting research, and is also valuable for all clinicians who use published research to inform their clinical practice.We present a review written specifically for the practising geriatrician. This considers how quality is defined in relation to the methodological conduct and reporting of research. Having established why quality assessment is important, we present and critique tools which are available to standardise quality assessment. We consider five study designs: RCTs, non-randomised studies, observational studies, systematic reviews and diagnostic test accuracy studies. Quality assessment for each of these study designs is illustrated with an example of published cognitive research. The practical applications of the tools are highlighted, with guidance on their strengths and limitations. We signpost educational resources and offer specific advice for use of these tools.We hope that all geriatricians become comfortable with critical appraisal of published research and that use of the tools described in this review - along with awareness of their strengths and limitations - become a part of teaching, journal clubs and practice. © The Author 2016. Published by Oxford University Press on behalf of the British Geriatrics Society.

Antenatal care and opportunities for quality improvement of service provision in resource limited settings: A mixed methods study

PubMed Central

van der Eem, Lisette; Nyanza, Elias C.; van Pelt, Sandra; Ndaki, Pendo; Basinda, Namanya; Sundby, Johanne

2017-01-01

Antenatal care is essential to improve maternal and newborn health and wellbeing. The majority of pregnant women in Tanzania attend at least one visit. Since implementation of the focused antenatal care model, quality of care assessments have mostly focused on utilization and coverage of routine interventions for antenatal care. This study aims to assess the quality of antenatal care provision from a holistic perspective in a rural district in Tanzania. Structure, process and outcome components of quality are explored. This paper reports on data collected over several periods from 2012 to 2015 through facility audits of supplies and services, ANC observations and exit interviews with pregnant women. Additional qualitative methods were used such as interviews, focus group observations and participant observations. Findings indicate variable performance of routine ANC services, partly explained by insufficient resources. Poor performance was also observed for appropriate history taking, attention for client’s wellbeing, basic physical examination and adequate counseling and education. Achieving quality improvement for ANC requires increased attention for the process of care provision beyond coverage, including attention for response-based services, which should be assessed based on locally determined criteria. PMID:29236699

Quality assessment of color images based on the measure of just noticeable color difference

NASA Astrophysics Data System (ADS)

Chou, Chun-Hsien; Hsu, Yun-Hsiang

2014-01-01

Accurate assessment on the quality of color images is an important step to many image processing systems that convey visual information of the reproduced images. An accurate objective image quality assessment (IQA) method is expected to give the assessment result highly agreeing with the subjective assessment. To assess the quality of color images, many approaches simply apply the metric for assessing the quality of gray scale images to each of three color channels of the color image, neglecting the correlation among three color channels. In this paper, a metric for assessing color images' quality is proposed, in which the model of variable just-noticeable color difference (VJNCD) is employed to estimate the visibility thresholds of distortion inherent in each color pixel. With the estimated visibility thresholds of distortion, the proposed metric measures the average perceptible distortion in terms of the quantized distortion according to the perceptual error map similar to that defined by National Bureau of Standards (NBS) for converting the color difference enumerated by CIEDE2000 to the objective score of perceptual quality assessment. The perceptual error map in this case is designed for each pixel according to the visibility threshold estimated by the VJNCD model. The performance of the proposed metric is verified by assessing the test images in the LIVE database, and is compared with those of many well-know IQA metrics. Experimental results indicate that the proposed metric is an effective IQA method that can accurately predict the image quality of color images in terms of the correlation between objective scores and subjective evaluation.

Effects of combined pressure and temperature on enzymes related to quality of fruits and vegetables: from kinetic information to process engineering aspects.

PubMed

Ludikhuyze, L; Van Loey, A; Indrawati; Smout, C; Hendrickx, M

2003-01-01

Throughout the last decade, high pressure technology has been shown to offer great potential to the food processing and preservation industry in delivering safe and high quality products. Implementation of this new technology will be largely facilitated when a scientific basis to assess quantitatively the impact of high pressure processes on food safety and quality becomes available. Besides, quantitative data on the effects of pressure and temperature on safety and quality aspects of foods are indispensable for design and evaluation of optimal high pressure processes, i.e., processes resulting in maximal quality retention within the constraints of the required reduction of microbial load and enzyme activity. Indeed it has to be stressed that new technologies should deliver, apart from the promised quality improvement, an equivalent or preferably enhanced level of safety. The present paper will give an overview from a quantitative point of view of the combined effects of pressure and temperature on enzymes related to quality of fruits and vegetables. Complete kinetic characterization of the inactivation of the individual enzymes will be discussed, as well as the use of integrated kinetic information in process engineering.

Quality-of-care research in mental health: responding to the challenge.

PubMed

McGlynn, E A; Norquist, G S; Wells, K B; Sullivan, G; Liberman, R P

1988-01-01

Quality-of-care research in mental health is in the developmental stages, which affords an opportunity to take an integrative approach, building on principles from efficacy, effectiveness, quality assessment, and quality assurance research. We propose an analytic strategy for designing research on the quality of mental health services using an adaptation of the structure, process, and outcome classification scheme. As a concrete illustration of our approach, we discuss research on a particular target population-patients with chronic schizophrenia. Future research should focus on developing models of treatment, establishing criteria and standards for outcomes and processes, and gathering data on community practices.

Retinal image quality assessment based on image clarity and content

NASA Astrophysics Data System (ADS)

Abdel-Hamid, Lamiaa; El-Rafei, Ahmed; El-Ramly, Salwa; Michelson, Georg; Hornegger, Joachim

2016-09-01

Retinal image quality assessment (RIQA) is an essential step in automated screening systems to avoid misdiagnosis caused by processing poor quality retinal images. A no-reference transform-based RIQA algorithm is introduced that assesses images based on five clarity and content quality issues: sharpness, illumination, homogeneity, field definition, and content. Transform-based RIQA algorithms have the advantage of considering retinal structures while being computationally inexpensive. Wavelet-based features are proposed to evaluate the sharpness and overall illumination of the images. A retinal saturation channel is designed and used along with wavelet-based features for homogeneity assessment. The presented sharpness and illumination features are utilized to assure adequate field definition, whereas color information is used to exclude nonretinal images. Several publicly available datasets of varying quality grades are utilized to evaluate the feature sets resulting in area under the receiver operating characteristic curve above 0.99 for each of the individual feature sets. The overall quality is assessed by a classifier that uses the collective features as an input vector. The classification results show superior performance of the algorithm in comparison to other methods from literature. Moreover, the algorithm addresses efficiently and comprehensively various quality issues and is suitable for automatic screening systems.

Application of advanced data collection and quality assurance methods in open prospective study - a case study of PONS project.

PubMed

Wawrzyniak, Zbigniew M; Paczesny, Daniel; Mańczuk, Marta; Zatoński, Witold A

2011-01-01

Large-scale epidemiologic studies can assess health indicators differentiating social groups and important health outcomes of the incidence and mortality of cancer, cardiovascular disease, and others, to establish a solid knowledgebase for the prevention management of premature morbidity and mortality causes. This study presents new advanced methods of data collection and data management systems with current data quality control and security to ensure high quality data assessment of health indicators in the large epidemiologic PONS study (The Polish-Norwegian Study). The material for experiment is the data management design of the large-scale population study in Poland (PONS) and the managed processes are applied into establishing a high quality and solid knowledge. The functional requirements of the PONS study data collection, supported by the advanced IT web-based methods, resulted in medical data of a high quality, data security, with quality data assessment, control process and evolution monitoring are fulfilled and shared by the IT system. Data from disparate and deployed sources of information are integrated into databases via software interfaces, and archived by a multi task secure server. The practical and implemented solution of modern advanced database technologies and remote software/hardware structure successfully supports the research of the big PONS study project. Development and implementation of follow-up control of the consistency and quality of data analysis and the processes of the PONS sub-databases have excellent measurement properties of data consistency of more than 99%. The project itself, by tailored hardware/software application, shows the positive impact of Quality Assurance (QA) on the quality of outcomes analysis results, effective data management within a shorter time. This efficiency ensures the quality of the epidemiological data and indicators of health by the elimination of common errors of research questionnaires and medical measurements.

Quantitative assessment of desertification in south of Iran using MEDALUS method.

PubMed

Sepehr, A; Hassanli, A M; Ekhtesasi, M R; Jamali, J B

2007-11-01

The main aim of this study was the quantitative assessment of desertification process in the case study area of the Fidoye-Garmosht plain (Southern Iran). Based on the MEDALUS approach and the characteristics of study area a regional model developed using GIS. Six main factors or indicators of desertification including: soil, climate, erosion, plant cover, groundwater and management were considered for evaluation. Then several sub-indicators affecting the quality of each main indicator were identified. Based on the MEDALUS approach, each sub-indicator was quantified according to its quality and given a weighting of between 1.0 and 2.0. ArcGIS 9 was used to analyze and prepare the layers of quality maps using the geometric mean to integrate the individual sub-indicator maps. In turn the geometric mean of all six quality maps was used to generate a single desertification status map. Results showed that 12% of the area is classified as very severe, 81% as severe and 7% as moderately affected by desertification. In addition the plant cover and groundwater indicators were the most important factors affecting desertification process in the study area. The model developed may be used to assess desertification process and distinguish the areas sensitive to desertification in the study region and in regions with the similar characteristics.

A comprehensive framework for data quality assessment in CER.

PubMed

Holve, Erin; Kahn, Michael; Nahm, Meredith; Ryan, Patrick; Weiskopf, Nicole

2013-01-01

The panel addresses the urgent need to ensure that comparative effectiveness research (CER) findings derived from diverse and distributed data sources are based on credible, high-quality data; and that the methods used to assess and report data quality are consistent, comprehensive, and available to data consumers. The panel consists of representatives from four teams leveraging electronic clinical data for CER, patient centered outcomes research (PCOR), and quality improvement (QI) and seeks to change the current paradigm where data quality assessment (DQA) is performed "behind the scenes" using one-off project specific methods. The panelists will present their process of harmonizing existing models for describing and measuring clinical data quality and will describe a comprehensive integrated framework for assessing and reporting DQA findings. The collaborative project is supported by the Electronic Data Methods (EDM) Forum, a three-year grant from the Agency for Healthcare Research and Quality (AHRQ) to facilitate learning and foster collaboration across a set of CER, PCOR, and QI projects designed to build infrastructure and methods for collecting and analyzing prospective data from electronic clinical data .

Implementation of Programmatic Quality and the Impact on Safety

NASA Technical Reports Server (NTRS)

Huls, Dale Thomas; Meehan, Kevin

2005-01-01

The purpose of this paper is to discuss the implementation of a programmatic quality assurance discipline within the International Space Station Program and the resulting impact on safety. NASA culture has continued to stress safety at the expense of quality when both are extremely important and both can equally influence the success or failure of a Program or Mission. Although safety was heavily criticized in the media after Colimbiaa, strong case can be made that it was the failure of quality processes and quality assurance in all processes that eventually led to the Columbia accident. Consequently, it is possible to have good quality processes without safety, but it is impossible to have good safety processes without quality. The ISS Program quality assurance function was analyzed as representative of the long-term manned missions that are consistent with the President s Vision for Space Exploration. Background topics are as follows: The quality assurance organizational structure within the ISS Program and the interrelationships between various internal and external organizations. ISS Program quality roles and responsibilities with respect to internal Program Offices and other external organizations such as the Shuttle Program, JSC Directorates, NASA Headquarters, NASA Contractors, other NASA Centers, and International Partner/participants will be addressed. A detailed analysis of implemented quality assurance responsibilities and functions with respect to NASA Headquarters, the JSC S&MA Directorate, and the ISS Program will be presented. Discussions topics are as follows: A comparison of quality and safety resources in terms of staffing, training, experience, and certifications. A benchmark assessment of the lessons learned from the Columbia Accident Investigation (CAB) Report (and follow-up reports and assessments), NASA Benchmarking, and traditional quality assurance activities against ISS quality procedures and practices. The lack of a coherent operational and sustaining quality assurance strategy for long-term manned space flight. An analysis of the ISS waiver processes and the Problem Reporting and Corrective Action (PRACA) process implemented as quality functions. Impact of current ISS Program procedures and practices with regards to operational safety and risk A discussion regarding a "defense-in-depth" approach to quality functions will be provided to address the issue of "integration vs independence" with respect to the roles of Programs, NASA Centers, and NASA Headquarters. Generic recommendations are offered to address the inadequacies identified in the implementation of ISS quality assurance. A reassessment by the NASA community regarding the importance of a "quality culture" as a component within a larger "safety culture" will generate a more effective and value-added functionality that will ultimately enhance safety.

Clinical nursing leaders' perceptions of nutrition quality indicators in Swedish stroke wards: a national survey.

PubMed

Persenius, Mona; Hall-Lord, Marie-Louise; Wilde-Larsson, Bodil; Carlsson, Eva

2015-09-01

To describe nursing leaders' perceptions of nutrition quality in Swedish stroke wards. A high risk of undernutrition places great demand on nutritional care in stroke wards. Evidence-based guidelines exist, but healthcare professionals have reported low interest in nutritional care. The Donabedian framework of structure, process and outcome is recommended to monitor and improve nutrition quality. Using a descriptive cross-sectional design, a web-based questionnaire regarding nutritional care quality was delivered to eligible participants. Most clinical nursing leaders reported structure indicators, e.g. access to dieticians. Among process indicators, regular assessment of patients' swallowing was most frequently reported in comprehensive stroke wards compared with other stroke wards. Use of outcomes to monitor nutrition quality was not routine. Wards using standard care plans showed significantly better results. Using the structure, process and outcome framework to examine nutrition quality, quality-improvement needs became visible. To provide high-quality nutrition, all three structure, process and outcome components must be addressed. The use of care pathways, standard care plans, the Senior Alert registry, as well as systematic use of outcome measures could improve nutrition quality. To assist clinical nursing leaders in managing all aspects of quality, structure, process and outcome can be a valuable framework. © 2013 John Wiley & Sons Ltd.

Is Your Ethics Committee Efficient? Using “IRB Metrics” as a Self-Assessment Tool for Continuous Improvement at the Faculty of Tropical Medicine, Mahidol University, Thailand

PubMed Central

Adams, Pornpimon; Kaewkungwal, Jaranit; Limphattharacharoen, Chanthima; Prakobtham, Sukanya; Pengsaa, Krisana; Khusmith, Srisin

2014-01-01

Tensions between researchers and ethics committees have been reported in several institutions. Some reports suggest researchers lack confidence in the quality of institutional review board (IRB) reviews, and that emphasis on strict procedural compliance and ethical issues raised by the IRB might unintentionally lead to delays in correspondence between researchers and ethics committees, and/or even encourage prevarication/equivocation, if researchers perceive committee concerns and criticisms unjust. This study systematically analyzed the efficiency of different IRB functions, and the relationship between efficiency and perceived quality of the decision-making process. The major purposes of this study were thus (1) to use the IRB Metrics developed by the Faculty of Tropical Medicine, Mahidol University, Thailand (FTM-EC) to assess the operational efficiency and perceived effectiveness of its ethics committees, and (2) to determine ethical issues that may cause the duration of approval process to be above the target limit of 60 days. Based on a literature review of definitions and methods used and proposed for use, in assessing aspects of IRB quality, an “IRB Metrics” was developed to assess IRB processes using a structure-process-outcome measurement model. To observe trends in the indicators evaluated, data related to all protocols submitted to the two panels of the FTM-EC (clinical and non-clinical), between January 2010–September 2013, were extracted and analyzed. Quantitative information based on IRB Metrics structure-process-outcome illuminates different areas for internal-process improvement. Ethical issues raised with researchers by the IRB, which were associated with the duration of the approval process in protocol review, could be considered root causes of tensions between the parties. The assessment of IRB structure-process-outcome thus provides a valuable opportunity to strengthen relationships and reduce conflicts between IRBs and researchers, with positive outcomes for all parties involved in the conduct of human-subject research. PMID:25406085

Embedding Quality Culture in Higher Education in Ghana: Quality Control and Assessment in Emerging Private Universities

ERIC Educational Resources Information Center

Ntim, Stephen

2014-01-01

High quality provision has been one of the key aims of the current reforms in higher educational institutions across the globe since the beginning of the century and the millennium. Consequently this has led to the increasing demand for quality assurance (QA). This report identifies those institutional processes and structures that support the…

Feasibility of a Computerized Method to Measure Quality of "Everyday" Life in Children with Neuromuscular Disorders

ERIC Educational Resources Information Center

Bray, Paula; Bundy, Anita C.; Ryan, Monique M.; North, Kathryn N.

2010-01-01

Measurement of quality of life is becoming increasingly important in health care. Self-reported quality of life is the preferred method of gathering this information, but children are often excluded from this process, their input being replaced by parent-proxy report. This feasibility study tested assessment of "daily" quality-of-life by a…

National Beef Quality Audit-2011: In-plant survey of targeted carcass characteristics related to quality, quantity, value, and marketing of fed steers and heifers

USDA-ARS?s Scientific Manuscript database

The National Beef Quality Audit – 2011 (NBQA-2011) assessed the current status of quality and consistency of fed steers and heifers. Beef carcasses (n = 9,802), representing approximately 10 percent of each production lot in 28 beef processing facilities, were selected randomly for the survey. Car...

Ten years of the International Patient Decision Aid Standards Collaboration: evolution of the core dimensions for assessing the quality of patient decision aids

PubMed Central

2013-01-01

In 2003, the International Patient Decision Aid Standards (IPDAS) Collaboration was established to enhance the quality and effectiveness of patient decision aids by establishing an evidence-informed framework for improving their content, development, implementation, and evaluation. Over this 10 year period, the Collaboration has established: a) the background document on 12 core dimensions to inform the original modified Delphi process to establish the IPDAS checklist (74 items); b) the valid and reliable IPDAS instrument (47 items); and c) the IPDAS qualifying (6 items), certifying (6 items + 4 items for screening), and quality criteria (28 items). The objective of this paper is to describe the evolution of the IPDAS Collaboration and discuss the standardized process used to update the background documents on the theoretical rationales, evidence and emerging issues underlying the 12 core dimensions for assessing the quality of patient decision aids. PMID:24624947

Sensoring fusion data from the optic and acoustic emissions of electric arcs in the GMAW-S process for welding quality assessment.

PubMed

Alfaro, Sadek Crisóstomo Absi; Cayo, Eber Huanca

2012-01-01

The present study shows the relationship between welding quality and optical-acoustic emissions from electric arcs, during welding runs, in the GMAW-S process. Bead on plate welding tests was carried out with pre-set parameters chosen from manufacturing standards. During the welding runs interferences were induced on the welding path using paint, grease or gas faults. In each welding run arc voltage, welding current, infrared and acoustic emission values were acquired and parameters such as arc power, acoustic peaks rate and infrared radiation rate computed. Data fusion algorithms were developed by assessing known welding quality parameters from arc emissions. These algorithms have showed better responses when they are based on more than just one sensor. Finally, it was concluded that there is a close relation between arc emissions and quality in welding and it can be measured from arc emissions sensing and data fusion algorithms.

Physicochemical equivalence of generic antihypertensive medicines (EQUIMEDS): protocol for a quality of medicines assessment

PubMed Central

Redfern, Julie; Adedoyin, Rufus Adesoji; Ofori, Sandra; Anchala, Raghupathy; Ajay, Vamadevan S; De Andrade, Luciano; Zelaya, Jose; Kaur, Harparkash; Balabanova, Dina; Sani, Mahmoud U

2016-01-01

Background Prevention and optimal management of hypertension in the general population is paramount to the achievement of the World Heart Federation (WHF) goal of reducing premature cardiovascular disease (CVD) mortality by 25% by the year 2025 and widespread access to good quality antihypertensive medicines is a critical component for achieving the goal. Despite research and evidence relating to other medicines such as antimalarials and antibiotics, there is very little known about the quality of generic antihypertensive medicines in low-income and middle-income countries. The aim of this study was to determine the physicochemical equivalence (percentage of active pharmaceutical ingredient, API) of generic antihypertensive medicines available in the retail market of a developing country. Methods An observational design will be adopted, which includes literature search, landscape assessment, collection and analysis of medicine samples. To determine physicochemical equivalence, a multistage sampling process will be used, including (1) identification of the 2 most commonly prescribed classes of antihypertensive medicines prescribed in Nigeria; (2) identification of a random sample of 10 generics from within each of the 2 most commonly prescribed classes; (3) a geographical representative sampling process to identify a random sample of 24 retail outlets in Nigeria; (4) representative sample purchasing, processing to assess the quality of medicines, storage and transport; and (5) assessment of the physical and chemical equivalence of the collected samples compared to the API in the relevant class. In total, 20 samples from each of 24 pharmacies will be tested (total of 480 samples). Discussion Availability of and access to quality antihypertensive medicines globally is therefore a vital strategy needed to achieve the WHF 25×25 targets. However, there is currently a scarcity of knowledge about the quality of antihypertensive medicines available in developing countries. Such information is important for enforcing and for ensuring the quality of antihypertensive medicines. PMID:28588941

Cost Models for MMC Manufacturing Processes

NASA Technical Reports Server (NTRS)

Elzey, Dana M.; Wadley, Haydn N. G.

1996-01-01

The quality cost modeling (QCM) tool is intended to be a relatively simple-to-use device for obtaining a first-order assessment of the quality-cost relationship for a given process-material combination. The QCM curve is a plot of cost versus quality (an index indicating microstructural quality), which is unique for a given process-material combination. The QCM curve indicates the tradeoff between cost and performance, thus enabling one to evaluate affordability. Additionally, the effect of changes in process design, raw materials, and process conditions on the cost-quality relationship can be evaluated. Such results might indicate the most efficient means to obtain improved quality at reduced cost by process design refinements, the implementation of sensors and models for closed loop process control, or improvement in the properties of raw materials being fed into the process. QCM also allows alternative processes for producing the same or similar material to be compared in terms of their potential for producing competitively priced, high quality material. Aside from demonstrating the usefulness of the QCM concept, this is one of the main foci of the present research program, namely to compare processes for making continuous fiber reinforced, metal matrix composites (MMC's). Two processes, low pressure plasma spray deposition and tape casting are considered for QCM development. This document consists of a detailed look at the design of the QCM approach, followed by discussion of the application of QCM to each of the selected MMC manufacturing processes along with results, comparison of processes, and finally, a summary of findings and recommendations.

Structuring the Peer Assessment Process: A Multilevel Approach for the Impact on Product Improvement and Peer Feedback Quality

ERIC Educational Resources Information Center

Gielen, M.; De Wever, B.

2015-01-01

In order to optimize students' peer feedback processes, this study investigates how an instructional intervention in the peer assessment process can have a beneficial effect on students' performance in a wiki environment in first-year higher education. The main aim was to study the effect of integrating a peer feedback template with a varying…

Quality assessment of dental health services provided at the Faculty of Dentistry, King Abdulaziz University.

PubMed

Hassan, Ali H; Amer, Hala A; Maghrabi, Abdulhamaid A

2005-01-01

The objectives of this research were to assess the quality of dental services delivered in King Abdulaziz University and highlight the necessary recommendations that would improve it. The methods used were live photographs illustrating the structure of dental services of the faculty presented in the clinic buildings, waiting places, equipments, instruments and supplies, as well as the comfort and privacy. Review of official records of the faculty for the number, qualifications and training of the dental staff and auxiliary personnel, as well as the process of care (starting from patient registration until completion of treatment). Records also demonstrated the access and utilization of services delivered in the various departments, the quality of these services and of infection control measures and procedures. The results revealed the high quality of services delivered through evaluating the structure and process of care in the university dental clinics. Dental services of King Abdulaziz University conform to high quality standards, with implementation of some changes for improvement and development.

An empirical model of water quality for use in rapid management strategy evaluation in Southeast Queensland, Australia.

PubMed

de la Mare, William; Ellis, Nick; Pascual, Ricardo; Tickell, Sharon

2012-04-01

Simulation models have been widely adopted in fisheries for management strategy evaluation (MSE). However, in catchment management of water quality, MSE is hampered by the complexity of both decision space and the hydrological process models. Empirical models based on monitoring data provide a feasible alternative to process models; they run much faster and, by conditioning on data, they can simulate realistic responses to management actions. Using 10 years of water quality indicators from Queensland, Australia, we built an empirical model suitable for rapid MSE that reproduces the water quality variables' mean and covariance structure, adjusts the expected indicators through local management effects, and propagates effects downstream by capturing inter-site regression relationships. Empirical models enable managers to search the space of possible strategies using rapid assessment. They provide not only realistic responses in water quality indicators but also variability in those indicators, allowing managers to assess strategies in an uncertain world. Copyright © 2012 Elsevier Ltd. All rights reserved.

Quality assurance of data collection in the multi-site community randomized trial and prevalence survey of the children's healthy living program.

PubMed

Yamanaka, Ashley; Fialkowski, Marie Kainoa; Wilkens, Lynne; Li, Fenfang; Ettienne, Reynolette; Fleming, Travis; Power, Julianne; Deenik, Jonathan; Coleman, Patricia; Leon Guerrero, Rachael; Novotny, Rachel

2016-09-02

Quality assurance plays an important role in research by assuring data integrity, and thus, valid study results. We aim to describe and share the results of the quality assurance process used to guide the data collection process in a multi-site childhood obesity prevalence study and intervention trial across the US Affiliated Pacific Region. Quality assurance assessments following a standardized protocol were conducted by one assessor in every participating site. Results were summarized to examine and align the implementation of protocol procedures across diverse settings. Data collection protocols focused on food and physical activity were adhered to closely; however, protocols for handling completed forms and ensuring data security showed more variability. Quality assurance protocols are common in the clinical literature but are limited in multi-site community-based studies, especially in underserved populations. The reduction in the number of QA problems found in the second as compared to the first data collection periods for the intervention study attest to the value of this assessment. This paper can serve as a reference for similar studies wishing to implement quality assurance protocols of the data collection process to preserve data integrity and enhance the validity of study findings. NIH clinical trial #NCT01881373.

Agreement and disagreement on health care quality concepts among academic health professionals: the Saudi case.

PubMed

Mahrous, Mohamed Saad

2014-01-01

A systematic and rigorous implementation of quality improvement processes is likely to improve the well-being of staff members and heighten their job satisfaction. Assessing professionals' perceptions of health care quality should lead to the betterment of health care services. In Saudi Arabia, no previous studies examine how university health professionals view health care quality concepts. A cross-sectional analytical study employing a self-administered questionnaire with 43 statements assessing quality perceptions of academic health care professionals was used. Despite the agreement of health professionals on numerous quality concepts addressed in this study, there was insufficient agreement on 10 core quality concepts, 3 of which were the following: "quality focuses on customers" (50%), "quality is tangible and therefore measurable" (29.3%), and "quality is data-driven" (62%). Hence, providing health professionals with relevant training likely will generate a better understanding of quality concepts and optimize their performance.

Using 2H and 18O in assessing evaporation and water residence time of lakes in EPA’s National Lakes Assessment.

EPA Science Inventory

Stable isotopes of water and organic material can be very useful in monitoring programs because stable isotopes integrate information about ecological processes and record this information. Most ecological processes of interest for water quality (i.e. denitrification) require si...

Increasing Student Ownership and Responsibility through the Collaborative Assessment Process.

ERIC Educational Resources Information Center

Branch, Myra; Grafelman, Brenda; Hurelbrink, Kurt

This report describes a program for increasing student ownership and responsibility to bring about quality work. The students were actively involved in the collaborative assessment process. The targeted population consisted of first and second grade students in a middle class community in Central Illinois. An increased sense of ownership,…

Detection and assessment of flaws in friction stir welded metallic plates

NASA Astrophysics Data System (ADS)

Fakih, Mohammad Ali; Mustapha, Samir; Tarraf, Jaafar; Ayoub, Georges; Hamade, Ramsey

2017-04-01

Investigated is the ability of ultrasonic guided waves to detect flaws and assess the quality of friction stir welds (FSW). AZ31B magnesium plates were friction stir welded. While process parameters of spindle speed and tool feed were fixed, shoulder penetration depth was varied resulting in welds of varying quality. Ultrasonic waves were excited at different frequencies using piezoelectric wafers and the fundamental symmetric (S0) mode was selected to detect the flaws resulting from the welding process. The front of the first transmitted wave signal was used to capture the S0 mode. A damage index (DI) measure was defined based on the amplitude attenuation after wave interaction with the welded zone. Computed Tomography (CT) scanning was employed as a nondestructive testing (NDT) technique to assess the actual weld quality. Derived DI values were plotted against CT-derived flaw volume resulting in a perfectly linear fit. The proposed approach showed high sensitivity of the S0 mode to internal flaws within the weld. As such, this methodology bears great potential as a future predictive method for the evaluation of FSW weld quality.

Donabedian's structure-process-outcome quality of care model: Validation in an integrated trauma system.

PubMed

Moore, Lynne; Lavoie, André; Bourgeois, Gilles; Lapointe, Jean

2015-06-01

According to Donabedian's health care quality model, improvements in the structure of care should lead to improvements in clinical processes that should in turn improve patient outcome. This model has been widely adopted by the trauma community but has not yet been validated in a trauma system. The objective of this study was to assess the performance of an integrated trauma system in terms of structure, process, and outcome and evaluate the correlation between quality domains. Quality of care was evaluated for patients treated in a Canadian provincial trauma system (2005-2010; 57 centers, n = 63,971) using quality indicators (QIs) developed and validated previously. Structural performance was measured by transposing on-site accreditation visit reports onto an evaluation grid according to American College of Surgeons criteria. The composite process QI was calculated as the average sum of proportions of conformity to 15 process QIs derived from literature review and expert opinion. Outcome performance was measured using risk-adjusted rates of mortality, complications, and readmission as well as hospital length of stay (LOS). Correlation was assessed with Pearson's correlation coefficients. Statistically significant correlations were observed between structure and process QIs (r = 0.33), and process and outcome QIs (r = -0.33 for readmission, r = -0.27 for LOS). Significant positive correlations were also observed between outcome QIs (r = 0.37 for mortality-readmission; r = 0.39 for mortality-LOS and readmission-LOS; r = 0.45 for mortality-complications; r = 0.34 for readmission-complications; 0.63 for complications-LOS). Significant correlations between quality domains observed in this study suggest that Donabedian's structure-process-outcome model is a valid model for evaluating trauma care. Trauma centers that perform well in terms of structure also tend to perform well in terms of clinical processes, which in turn has a favorable influence on patient outcomes. Prognostic study, level III.

Characterization of a Saccharomyces cerevisiae fermentation process for production of a therapeutic recombinant protein using a multivariate Bayesian approach.

PubMed

Fu, Zhibiao; Baker, Daniel; Cheng, Aili; Leighton, Julie; Appelbaum, Edward; Aon, Juan

2016-05-01

The principle of quality by design (QbD) has been widely applied to biopharmaceutical manufacturing processes. Process characterization is an essential step to implement the QbD concept to establish the design space and to define the proven acceptable ranges (PAR) for critical process parameters (CPPs). In this study, we present characterization of a Saccharomyces cerevisiae fermentation process using risk assessment analysis, statistical design of experiments (DoE), and the multivariate Bayesian predictive approach. The critical quality attributes (CQAs) and CPPs were identified with a risk assessment. The statistical model for each attribute was established using the results from the DoE study with consideration given to interactions between CPPs. Both the conventional overlapping contour plot and the multivariate Bayesian predictive approaches were used to establish the region of process operating conditions where all attributes met their specifications simultaneously. The quantitative Bayesian predictive approach was chosen to define the PARs for the CPPs, which apply to the manufacturing control strategy. Experience from the 10,000 L manufacturing scale process validation, including 64 continued process verification batches, indicates that the CPPs remain under a state of control and within the established PARs. The end product quality attributes were within their drug substance specifications. The probability generated with the Bayesian approach was also used as a tool to assess CPP deviations. This approach can be extended to develop other production process characterization and quantify a reliable operating region. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:799-812, 2016. © 2016 American Institute of Chemical Engineers.

Reduction of Defects in Germanium-Silicon

NASA Technical Reports Server (NTRS)

Szofran, F. R.; Benz, K. W.; Cobb, S. D.; Croell, A.; Dold, P.; Kaiser, N.; Motakel, S.; Walker, J. S.

2000-01-01

Crystals grown without contact with a container have far superior quality to otherwise similar crystals grown in direct contact with a container. In addition to float-zone processing, detached-Bridgman growth is a promising tool to improve crystal quality, without the limitations of float zoning. Detached growth has been found to occur frequently during microg experiments and considerable improvements of crystal quality have been reported for those cases. However, no thorough understanding of the process or quantitative assessment of the quality improvements exists so far. This project is determining the means to reproducibly grow Ge-Si alloys in the detached mode.

What We've Learned about Assessing Hands-On Science.

ERIC Educational Resources Information Center

Shavelson, Richard J.; Baxter, Gail P.

1992-01-01

A recent study compared hands-on scientific inquiry assessment to assessments involving lab notebooks, computer simulations, short-answer paper-and-pencil problems, and multiple-choice questions. Creating high quality performance assessments is a costly, time-consuming process requiring considerable scientific and technological know-how. Improved…

Quality Assessment of Collection 6 MODIS Atmospheric Science Products

NASA Astrophysics Data System (ADS)

Manoharan, V. S.; Ridgway, B.; Platnick, S. E.; Devadiga, S.; Mauoka, E.

2015-12-01

Since the launch of the NASA Terra and Aqua satellites in December 1999 and May 2002, respectively, atmosphere and land data acquired by the MODIS (Moderate Resolution Imaging Spectroradiometer) sensor on-board these satellites have been reprocessed five times at the MODAPS (MODIS Adaptive Processing System) located at NASA GSFC. The global land and atmosphere products use science algorithms developed by the NASA MODIS science team investigators. MODAPS completed Collection 6 reprocessing of MODIS Atmosphere science data products in April 2015 and is currently generating the Collection 6 products using the latest version of the science algorithms. This reprocessing has generated one of the longest time series of consistent data records for understanding cloud, aerosol, and other constituents in the earth's atmosphere. It is important to carefully evaluate and assess the quality of this data and remove any artifacts to maintain a useful climate data record. Quality Assessment (QA) is an integral part of the processing chain at MODAPS. This presentation will describe the QA approaches and tools adopted by the MODIS Land/Atmosphere Operational Product Evaluation (LDOPE) team to assess the quality of MODIS operational Atmospheric products produced at MODAPS. Some of the tools include global high resolution images, time series analysis and statistical QA metrics. The new high resolution global browse images with pan and zoom have provided the ability to perform QA of products in real time through synoptic QA on the web. This global browse generation has been useful in identifying production error, data loss, and data quality issues from calibration error, geolocation error and algorithm performance. A time series analysis for various science datasets in the Level-3 monthly product was recently developed for assessing any long term drifts in the data arising from instrument errors or other artifacts. This presentation will describe and discuss some test cases from the recently processed C6 products. We will also describe the various tools and approaches developed to verify and assess the algorithm changes implemented by the science team to address known issues in the products and improve the quality of the products.

A new hyperspectral imaging based device for quality control in plastic recycling

NASA Astrophysics Data System (ADS)

Bonifazi, G.; D'Agostini, M.; Dall'Ava, A.; Serranti, S.; Turioni, F.

2013-05-01

The quality control of contamination level in the recycled plastics stream has been identified as an important key factor for increasing the value of the recycled material by both plastic recycling and compounder industries. Existing quality control methods for the detection of both plastics and non-plastics contaminants in the plastic waste streams at different stages of the industrial process (e.g. feed, intermediate and final products) are currently based on the manual collection from the stream of a sample and on the subsequent off-line laboratory analyses. The results of such analyses are usually available after some hours, or sometimes even some days, after the material has been processed. The laboratory analyses are time-consuming and expensive (both in terms of equipment cost and their maintenance and of labour cost).Therefore, a fast on-line assessment to monitor the plastic waste feed streams and to characterize the composition of the different plastic products, is fundamental to increase the value of secondary plastics. The paper is finalized to describe and evaluate the development of an HSI-based device and of the related software architectures and processing algorithms for quality assessment of plastics in recycling plants, with particular reference to polyolefins (PO). NIR-HSI sensing devices coupled with multivariate data analysis methods was demonstrated as an objective, rapid and non-destructive technique that can be used for on-line quality and process control in the recycling process of POs. In particular, the adoption of the previous mentioned HD&SW integrated architectures can provide a solution to one of the major problems of the recycling industry, which is the lack of an accurate quality certification of materials obtained by recycling processes. These results could therefore assist in developing strategies to certify the composition of recycled PO products.

Reduced exposure using asymmetric cone beam processing for wide area detector cardiac CT

PubMed Central

Bedayat, Arash; Kumamaru, Kanako; Powers, Sara L.; Signorelli, Jason; Steigner, Michael L.; Steveson, Chloe; Soga, Shigeyoshi; Adams, Kimberly; Mitsouras, Dimitrios; Clouse, Melvin; Mather, Richard T.

2011-01-01

The purpose of this study was to estimate dose reduction after implementation of asymmetrical cone beam processing using exposure differences measured in a water phantom and a small cohort of clinical coronary CTA patients. Two separate 320 × 0.5 mm detector row scans of a water phantom used identical cardiac acquisition parameters before and after software modifications from symmetric to asymmetric cone beam acquisition and processing. Exposure was measured at the phantom surface with Optically Stimulated Luminescence (OSL) dosimeters at 12 equally spaced angular locations. Mean HU and standard deviation (SD) for both approaches were compared using ROI measurements obtained at the center plus four peripheral locations in the water phantom. To assess image quality, mean HU and standard deviation (SD) for both approaches were compared using ROI measurements obtained at five points within the water phantom. Retrospective evaluation of 64 patients (37 symmetric; 27 asymmetric acquisition) included clinical data, scanning parameters, quantitative plus qualitative image assessment, and estimated radiation dose. In the water phantom, the asymmetric cone beam processing reduces exposure by approximately 20% with no change in image quality. The clinical coronary CTA patient groups had comparable demographics. The estimated dose reduction after implementation of the asymmetric approach was roughly 24% with no significant difference between the symmetric and asymmetric approach with respect to objective measures of image quality or subjective assessment using a four point scale. When compared to a symmetric approach, the decreased exposure, subsequent lower patient radiation dose, and similar image quality from asymmetric cone beam processing supports its routine clinical use. PMID:21336552

Reduced exposure using asymmetric cone beam processing for wide area detector cardiac CT.

PubMed

Bedayat, Arash; Rybicki, Frank J; Kumamaru, Kanako; Powers, Sara L; Signorelli, Jason; Steigner, Michael L; Steveson, Chloe; Soga, Shigeyoshi; Adams, Kimberly; Mitsouras, Dimitrios; Clouse, Melvin; Mather, Richard T

2012-02-01

The purpose of this study was to estimate dose reduction after implementation of asymmetrical cone beam processing using exposure differences measured in a water phantom and a small cohort of clinical coronary CTA patients. Two separate 320 × 0.5 mm detector row scans of a water phantom used identical cardiac acquisition parameters before and after software modifications from symmetric to asymmetric cone beam acquisition and processing. Exposure was measured at the phantom surface with Optically Stimulated Luminescence (OSL) dosimeters at 12 equally spaced angular locations. Mean HU and standard deviation (SD) for both approaches were compared using ROI measurements obtained at the center plus four peripheral locations in the water phantom. To assess image quality, mean HU and standard deviation (SD) for both approaches were compared using ROI measurements obtained at five points within the water phantom. Retrospective evaluation of 64 patients (37 symmetric; 27 asymmetric acquisition) included clinical data, scanning parameters, quantitative plus qualitative image assessment, and estimated radiation dose. In the water phantom, the asymmetric cone beam processing reduces exposure by approximately 20% with no change in image quality. The clinical coronary CTA patient groups had comparable demographics. The estimated dose reduction after implementation of the asymmetric approach was roughly 24% with no significant difference between the symmetric and asymmetric approach with respect to objective measures of image quality or subjective assessment using a four point scale. When compared to a symmetric approach, the decreased exposure, subsequent lower patient radiation dose, and similar image quality from asymmetric cone beam processing supports its routine clinical use.

Quality assessment of Isfahan Medical Faculty web site electronic services and prioritizing solutions using analytic hierarchy process approach

PubMed Central

Hajrahimi, Nafiseh; Dehaghani, Sayed Mehdi Hejazi; Hajrahimi, Nargess; Sarmadi, Sima

2014-01-01

Context: Implementing information technology in the best possible way can bring many advantages such as applying electronic services and facilitating tasks. Therefore, assessment of service providing systems is a way to improve the quality and elevate these systems including e-commerce, e-government, e-banking, and e-learning. Aims: This study was aimed to evaluate the electronic services in the website of Isfahan University of Medical Sciences in order to propose solutions to improve them. Furthermore, we aim to rank the solutions based on the factors that enhance the quality of electronic services by using analytic hierarchy process (AHP) method. Materials and Methods: Non-parametric test was used to assess the quality of electronic services. The assessment of propositions was based on Aqual model and they were prioritized using AHP approach. The AHP approach was used because it directly applies experts’ deductions in the model, and lead to more objective results in the analysis and prioritizing the risks. After evaluating the quality of the electronic services, a multi-criteria decision making frame-work was used to prioritize the proposed solutions. Statistical Analysis Used: Non-parametric tests and AHP approach using Expert Choice software. Results: The results showed that students were satisfied in most of the indicators. Only a few indicators received low satisfaction from students including, design attractiveness, the amount of explanation and details of information, honesty and responsiveness of authorities, and the role of e-services in the user's relationship with university. After interviewing with Information and Communications Technology (ICT) experts at the university, measurement criteria, and solutions to improve the quality were collected. The best solutions were selected by EC software. According to the results, the solution “controlling and improving the process in handling users complaints” is of the utmost importance and authorities have to have it on the website and place great importance on updating this process. Conclusions: Although, 4 out of the 22 indicators used in the test hypothesis were not confirmed, the results show that these assumptions are accepted at 95% confidence level. To improve the quality of electronic services, special attention should be paid to “services interaction.” As the results showed having “controlling and improving the process in handling users complaints” on the website is the first and most important one and the process of “changing brand/factory name/address in the text of the factory license/renewal or modification of manufacturing license/changing the formula” is the least important one. PMID:25540790

Quality assessment of Isfahan Medical Faculty web site electronic services and prioritizing solutions using analytic hierarchy process approach.

PubMed

Hajrahimi, Nafiseh; Dehaghani, Sayed Mehdi Hejazi; Hajrahimi, Nargess; Sarmadi, Sima

2014-01-01

Implementing information technology in the best possible way can bring many advantages such as applying electronic services and facilitating tasks. Therefore, assessment of service providing systems is a way to improve the quality and elevate these systems including e-commerce, e-government, e-banking, and e-learning. This study was aimed to evaluate the electronic services in the website of Isfahan University of Medical Sciences in order to propose solutions to improve them. Furthermore, we aim to rank the solutions based on the factors that enhance the quality of electronic services by using analytic hierarchy process (AHP) method. Non-parametric test was used to assess the quality of electronic services. The assessment of propositions was based on Aqual model and they were prioritized using AHP approach. The AHP approach was used because it directly applies experts' deductions in the model, and lead to more objective results in the analysis and prioritizing the risks. After evaluating the quality of the electronic services, a multi-criteria decision making frame-work was used to prioritize the proposed solutions. Non-parametric tests and AHP approach using Expert Choice software. The results showed that students were satisfied in most of the indicators. Only a few indicators received low satisfaction from students including, design attractiveness, the amount of explanation and details of information, honesty and responsiveness of authorities, and the role of e-services in the user's relationship with university. After interviewing with Information and Communications Technology (ICT) experts at the university, measurement criteria, and solutions to improve the quality were collected. The best solutions were selected by EC software. According to the results, the solution "controlling and improving the process in handling users complaints" is of the utmost importance and authorities have to have it on the website and place great importance on updating this process. Although, 4 out of the 22 indicators used in the test hypothesis were not confirmed, the results show that these assumptions are accepted at 95% confidence level. To improve the quality of electronic services, special attention should be paid to "services interaction." As the results showed having "controlling and improving the process in handling users complaints" on the website is the first and most important one and the process of "changing brand/factory name/address in the text of the factory license/renewal or modification of manufacturing license/changing the formula" is the least important one.

A Network Approach to Curriculum Quality Assessment

ERIC Educational Resources Information Center

Jordens, J. Zoe; Zepke, Nick

2009-01-01

This paper argues for an alternative approach to quality assurance in New Zealand universities that locates evaluation not with external auditors but with members of the teaching team. In the process, aspects of network theories are introduced as the basis for an approach to quality assurance. From this, the concept of networks is extended to…

Pasta production: complexity in defining processing conditions for reference trials and quality assessment models

USDA-ARS?s Scientific Manuscript database

Pasta is a simple food made from water and durum wheat (Triticum turgidum subsp. durum) semolina. As pasta increases in popularity, studies have endeavored to analyze the attributes that contribute to high quality pasta. Despite being a simple food, the laboratory scale analysis of pasta quality is ...

Review of the Primary National Ambient Air Quality Standards for Nitrogen Dioxide: Risk and Exposure Assessment Planning Document

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) is conducting a review of the air quality criteria and the primary (health-based) national ambient air quality standards (NAAQS) for nitrogen dioxide (NO2). The major phases of the process for reviewing NAAQS include the following: (...

Looking for High Quality Accreditation in Higher Education in Colombia

ERIC Educational Resources Information Center

Pérez Gama, Jesús Alfonso; Vega Vega, Anselmo

2017-01-01

We look for the High Quality Accreditation of tertiary education in two ways: one, involving large amount of information, including issues such as self-assessment, high quality, statistics, indicators, surveys, and field work (process engineering), during several periods of time; and the second, in relation to the information contained there about…

Review of the Primary National Ambient Air Quality Standard for Sulfur Oxides: Risk and Exposure Assessment Planning Document

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) is conducting a review of the air quality criteria and the primary (health-based) national ambient air quality standards (NAAQS) for sulfur oxides (SOx). The major phases of the process for reviewing NAAQS include the following: (1) ...

QCloud: A cloud-based quality control system for mass spectrometry-based proteomics laboratories

PubMed Central

Chiva, Cristina; Olivella, Roger; Borràs, Eva; Espadas, Guadalupe; Pastor, Olga; Solé, Amanda

2018-01-01

The increasing number of biomedical and translational applications in mass spectrometry-based proteomics poses new analytical challenges and raises the need for automated quality control systems. Despite previous efforts to set standard file formats, data processing workflows and key evaluation parameters for quality control, automated quality control systems are not yet widespread among proteomics laboratories, which limits the acquisition of high-quality results, inter-laboratory comparisons and the assessment of variability of instrumental platforms. Here we present QCloud, a cloud-based system to support proteomics laboratories in daily quality assessment using a user-friendly interface, easy setup, automated data processing and archiving, and unbiased instrument evaluation. QCloud supports the most common targeted and untargeted proteomics workflows, it accepts data formats from different vendors and it enables the annotation of acquired data and reporting incidences. A complete version of the QCloud system has successfully been developed and it is now open to the proteomics community (http://qcloud.crg.eu). QCloud system is an open source project, publicly available under a Creative Commons License Attribution-ShareAlike 4.0. PMID:29324744

German dentists' websites on periodontitis have low quality of information.

PubMed

Schwendicke, Falk; Stange, Jörg; Stange, Claudia; Graetz, Christian

2017-08-02

The internet is an increasingly relevant source of health information. We aimed to assess the quality of German dentists' websites on periodontitis, hypothesizing that it was significantly associated with a number of practice-specific parameters. We searched four electronic search engines and included pages which were freely accessible, posted by a dental practice in Germany, and mentioned periodontal disease/therapy. Websites were assessed for (1) technical and functional aspects, (2) generic quality and risk of bias, (3) disease-specific information. For 1 and 2, validated tools (LIDA/DISCERN) were used for assessment. For 3, we developed a criterion catalogue encompassing items on etiologic and prognostic factors for periodontitis, the diagnostic and treatment process, and the generic chance of tooth retention in periodontitis patients. Inter- and intra-rater reliabilities were largely moderate. Generalized linear modeling was used to assess the association between the information quality (measured as % of maximally available scores) and practice-specific characteristics. Seventy-one websites were included. Technical and functional aspects were reported in significantly higher quality (median: 71%, 25/75th percentiles: 67/79%) than all other aspects (p < 0.05). Generic risk of bias and most disease-specific aspects showed significantly lower reporting quality (median range was 0-40%), with poorest reporting for prognostic factors (9;0/27%), diagnostic process (0;0/33%) and chances of tooth retention (0;0/2%). We found none of the practice-specific parameters to have significant impact on the overall quality of the websites. Most German dentists' websites on periodontitis are not fully trustworthy and relevant information are not or insufficiently considered. There is great need to improve the information quality from such websites at least with regards to periodontitis.

Measuring the Process and Quality of Informed Consent for Clinical Research: Development and Testing

PubMed Central

Cohn, Elizabeth Gross; Jia, Haomiao; Smith, Winifred Chapman; Erwin, Katherine; Larson, Elaine L.

2013-01-01

Purpose/Objectives To develop and assess the reliability and validity of an observational instrument, the Process and Quality of Informed Consent (P-QIC). Design A pilot study of the psychometrics of a tool designed to measure the quality and process of the informed consent encounter in clinical research. The study used professionally filmed, simulated consent encounters designed to vary in process and quality. Setting A major urban teaching hospital in the northeastern region of the United States. Sample 63 students enrolled in health-related programs participated in psychometric testing, 16 students participated in test-retest reliability, and 5 investigator-participant dyads were observed for the actual consent encounters. Methods For reliability and validity testing, students watched and rated videotaped simulations of four consent encounters intentionally varied in process and content and rated them with the proposed instrument. Test-retest reliability was established by raters watching the videotaped simulations twice. Inter-rater reliability was demonstrated by two simultaneous but independent raters observing an actual consent encounter. Main Research Variables The essential elements of information and communication for informed consent. Findings The initial testing of the P-QIC demonstrated reliable and valid psychometric properties in both the simulated standardized consent encounters and actual consent encounters in the hospital setting. Conclusions The P-QIC is an easy-to-use observational tool that provides a quick assessment of the areas of strength and areas that need improvement in a consent encounter. It can be used in the initial trainings of new investigators or consent administrators and in ongoing programs of improvement for informed consent. Implications for Nursing The development of a validated observational instrument will allow investigators to assess the consent process more accurately and evaluate strategies designed to improve it. PMID:21708532

Quality Measures in Pre-Analytical Phase of Tissue Processing: Understanding Its Value in Histopathology.

PubMed

Rao, Shalinee; Masilamani, Suresh; Sundaram, Sandhya; Duvuru, Prathiba; Swaminathan, Rajendiran

2016-01-01

Quality monitoring in histopathology unit is categorized into three phases, pre-analytical, analytical and post-analytical, to cover various steps in the entire test cycle. Review of literature on quality evaluation studies pertaining to histopathology revealed that earlier reports were mainly focused on analytical aspects with limited studies on assessment of pre-analytical phase. Pre-analytical phase encompasses several processing steps and handling of specimen/sample by multiple individuals, thus allowing enough scope for errors. Due to its critical nature and limited studies in the past to assess quality in pre-analytical phase, it deserves more attention. This study was undertaken to analyse and assess the quality parameters in pre-analytical phase in a histopathology laboratory. This was a retrospective study done on pre-analytical parameters in histopathology laboratory of a tertiary care centre on 18,626 tissue specimens received in 34 months. Registers and records were checked for efficiency and errors for pre-analytical quality variables: specimen identification, specimen in appropriate fixatives, lost specimens, daily internal quality control performance on staining, performance in inter-laboratory quality assessment program {External quality assurance program (EQAS)} and evaluation of internal non-conformities (NC) for other errors. The study revealed incorrect specimen labelling in 0.04%, 0.01% and 0.01% in 2007, 2008 and 2009 respectively. About 0.04%, 0.07% and 0.18% specimens were not sent in fixatives in 2007, 2008 and 2009 respectively. There was no incidence of specimen lost. A total of 113 non-conformities were identified out of which 92.9% belonged to the pre-analytical phase. The predominant NC (any deviation from normal standard which may generate an error and result in compromising with quality standards) identified was wrong labelling of slides. Performance in EQAS for pre-analytical phase was satisfactory in 6 of 9 cycles. A low incidence of errors in pre-analytical phase implies that a satisfactory level of quality standards was being practiced with still scope for improvement.

WE-A-BRC-01: Introduction to the Certificate Course

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palta, J.

Quality and safety in healthcare are inextricably linked. There are compelling data that link poor quality radiation therapy to inferior patient survival. Radiation Oncology clinical trial protocol deviations often involve incorrect target volume delineation or dosing, akin to radiotherapy incidents which also often involve partial geometric miss or improper radiation dosing. When patients with radiation protocol variations are compared to those without significant protocol variations, clinical outcome is negatively impacted. Traditionally, quality assurance in radiation oncology has been driven largely by new technological advances, and safety improvement has been driven by reactive responses to past system failures and prescriptive mandatesmore » recommended by professional organizations and promulgated by regulators. Prescriptive approaches to quality and safety alone often do not address the huge variety of process and technique used in radiation oncology. Risk-based assessments of radiotherapy processes provide a mechanism to enhance quality and safety, both for new and for established techniques. It is imperative that we explore such a paradigm shift at this time, when expectations from patients as well as providers are rising while available resources are falling. There is much we can learn from our past experiences to be applied towards the new risk-based assessments. Learning Objectives: Understand the impact of clinical and technical quality on outcomes Understand the importance of quality care in radiation oncology Learn to assess the impact of quality on clinical outcomes D. Followill, NIH Grant CA180803.« less

WE-A-BRC-03: Lessons Learned: IROC Audits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Followill, D.

Quality and safety in healthcare are inextricably linked. There are compelling data that link poor quality radiation therapy to inferior patient survival. Radiation Oncology clinical trial protocol deviations often involve incorrect target volume delineation or dosing, akin to radiotherapy incidents which also often involve partial geometric miss or improper radiation dosing. When patients with radiation protocol variations are compared to those without significant protocol variations, clinical outcome is negatively impacted. Traditionally, quality assurance in radiation oncology has been driven largely by new technological advances, and safety improvement has been driven by reactive responses to past system failures and prescriptive mandatesmore » recommended by professional organizations and promulgated by regulators. Prescriptive approaches to quality and safety alone often do not address the huge variety of process and technique used in radiation oncology. Risk-based assessments of radiotherapy processes provide a mechanism to enhance quality and safety, both for new and for established techniques. It is imperative that we explore such a paradigm shift at this time, when expectations from patients as well as providers are rising while available resources are falling. There is much we can learn from our past experiences to be applied towards the new risk-based assessments. Learning Objectives: Understand the impact of clinical and technical quality on outcomes Understand the importance of quality care in radiation oncology Learn to assess the impact of quality on clinical outcomes D. Followill, NIH Grant CA180803.« less

WE-A-BRC-02: Lessons Learned: Clinical Trials and Operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Evans, S.

Quality and safety in healthcare are inextricably linked. There are compelling data that link poor quality radiation therapy to inferior patient survival. Radiation Oncology clinical trial protocol deviations often involve incorrect target volume delineation or dosing, akin to radiotherapy incidents which also often involve partial geometric miss or improper radiation dosing. When patients with radiation protocol variations are compared to those without significant protocol variations, clinical outcome is negatively impacted. Traditionally, quality assurance in radiation oncology has been driven largely by new technological advances, and safety improvement has been driven by reactive responses to past system failures and prescriptive mandatesmore » recommended by professional organizations and promulgated by regulators. Prescriptive approaches to quality and safety alone often do not address the huge variety of process and technique used in radiation oncology. Risk-based assessments of radiotherapy processes provide a mechanism to enhance quality and safety, both for new and for established techniques. It is imperative that we explore such a paradigm shift at this time, when expectations from patients as well as providers are rising while available resources are falling. There is much we can learn from our past experiences to be applied towards the new risk-based assessments. Learning Objectives: Understand the impact of clinical and technical quality on outcomes Understand the importance of quality care in radiation oncology Learn to assess the impact of quality on clinical outcomes D. Followill, NIH Grant CA180803.« less

Comparison of lignin extraction processes: Economic and environmental assessment.

PubMed

Carvajal, Juan C; Gómez, Álvaro; Cardona, Carlos A

2016-08-01

This paper presents the technical-economic and environmental assessment of four lignin extraction processes from two different raw materials (sugarcane bagasse and rice husks). The processes are divided into two categories, the first processes evaluates lignin extraction with prior acid hydrolysis step, while in the second case the extraction processes are evaluated standalone for a total analysis of 16 scenarios. Profitability indicators as the net present value (NPV) and environmental indicators as the potential environmental impact (PEI) are used through a process engineering approach to understand and select the best lignin extraction process. The results show that both economically and environmentally process with sulfites and soda from rice husk presents the best results; however the quality of lignin obtained with sulfites is not suitable for high value-added products. Then, the soda is an interesting option for the extraction of lignin if high quality lignin is required for high value-added products at low costs. Copyright © 2016 Elsevier Ltd. All rights reserved.

Reference-free automatic quality assessment of tracheoesophageal speech.

PubMed

Huang, Andy; Falk, Tiago H; Chan, Wai-Yip; Parsa, Vijay; Doyle, Philip

2009-01-01

Evaluation of the quality of tracheoesophageal (TE) speech using machines instead of human experts can enhance the voice rehabilitation process for patients who have undergone total laryngectomy and voice restoration. Towards the goal of devising a reference-free TE speech quality estimation algorithm, we investigate the efficacy of speech signal features that are used in standard telephone-speech quality assessment algorithms, in conjunction with a recently introduced speech modulation spectrum measure. Tests performed on two TE speech databases demonstrate that the modulation spectral measure and a subset of features in the standard ITU-T P.563 algorithm estimate TE speech quality with better correlation (up to 0.9) than previously proposed features.

Why should we bother with assessment moderation?

PubMed

Smith, Colleen

2012-08-01

Assessment moderation is a significant component of a quality education system. How this practice is conceptualised, applied to the assessment process and embedded in teaching and learning, influence the quality of nurse education programmes. This paper challenges the traditional view that moderation is confined to what happens at the time of assessment which is evident in the use of language such as pre-moderation and post-moderation practice. It critiques traditional moderation practices such as double marking, applying assessment criteria and standards and assigning marks and grades and argues that these practices don't do justice to the complexity of assessment. It calls for a whole of course approach to moderation based on a set of principles which encompass constructive alignment, a community of practice group, the subjective nature of assessment and a reflective quality improvement cycle. Copyright © 2011 Elsevier Ltd. All rights reserved.

A Primer for Developing Measures of Science Content Knowledge for Small-Scale Research and Instructional Use

PubMed Central

Bass, Kristin M.; Drits-Esser, Dina; Stark, Louisa A.

2016-01-01

The credibility of conclusions made about the effectiveness of educational interventions depends greatly on the quality of the assessments used to measure learning gains. This essay, intended for faculty involved in small-scale projects, courses, or educational research, provides a step-by-step guide to the process of developing, scoring, and validating high-quality content knowledge assessments. We illustrate our discussion with examples from our assessments of high school students’ understanding of concepts in cell biology and epigenetics. Throughout, we emphasize the iterative nature of the development process, the importance of creating instruments aligned to the learning goals of an intervention or curricula, and the importance of collaborating with other content and measurement specialists along the way. PMID:27055776

Improving data quality across 3 sub-Saharan African countries using the Consolidated Framework for Implementation Research (CFIR): results from the African Health Initiative.

PubMed

Gimbel, Sarah; Mwanza, Moses; Nisingizwe, Marie Paul; Michel, Cathy; Hirschhorn, Lisa

2017-12-21

High-quality data are critical to inform, monitor and manage health programs. Over the seven-year African Health Initiative of the Doris Duke Charitable Foundation, three of the five Population Health Implementation and Training (PHIT) partnership projects in Mozambique, Rwanda, and Zambia introduced strategies to improve the quality and evaluation of routinely-collected data at the primary health care level, and stimulate its use in evidence-based decision-making. Using the Consolidated Framework for Implementation Research (CFIR) as a guide, this paper: 1) describes and categorizes data quality assessment and improvement activities of the projects, and 2) identifies core intervention components and implementation strategy adaptations introduced to improve data quality in each setting. The CFIR was adapted through a qualitative theme reduction process involving discussions with key informants from each project, who identified two domains and ten constructs most relevant to the study aim of describing and comparing each country's data quality assessment approach and implementation process. Data were collected on each project's data quality improvement strategies, activities implemented, and results via a semi-structured questionnaire with closed and open-ended items administered to health management information systems leads in each country, with complementary data abstraction from project reports. Across the three projects, intervention components that aligned with user priorities and government systems were perceived to be relatively advantageous, and more readily adapted and adopted. Activities that both assessed and improved data quality (including data quality assessments, mentorship and supportive supervision, establishment and/or strengthening of electronic medical record systems), received higher ranking scores from respondents. Our findings suggest that, at a minimum, successful data quality improvement efforts should include routine audits linked to ongoing, on-the-job mentoring at the point of service. This pairing of interventions engages health workers in data collection, cleaning, and analysis of real-world data, and thus provides important skills building with on-site mentoring. The effect of these core components is strengthened by performance review meetings that unify multiple health system levels (provincial, district, facility, and community) to assess data quality, highlight areas of weakness, and plan improvements.

Understanding the uncertainty associated with particle-bound pollutant build-up and wash-off: A critical review.

PubMed

Wijesiri, Buddhi; Egodawatta, Prasanna; McGree, James; Goonetilleke, Ashantha

2016-09-15

Accurate prediction of stormwater quality is essential for developing effective pollution mitigation strategies. The use of models incorporating simplified mathematical replications of pollutant processes is the common practice for determining stormwater quality. However, an inherent process uncertainty arises due to the intrinsic variability associated with pollutant processes, which has neither been comprehensively understood, nor well accounted for in uncertainty assessment of stormwater quality modelling. This review provides the context for defining and quantifying the uncertainty associated with pollutant build-up and wash-off on urban impervious surfaces based on the hypothesis that particle size is predominant in influencing process variability. Critical analysis of published research literature brings scientific evidence together in order to establish the fact that particle size changes with time, and different sized particles exhibit distinct behaviour during build-up and wash-off, resulting in process variability. Analysis of the different adsorption behaviour of particles confirmed that the variations in pollutant load and composition are influenced by particle size. Particle behaviour and variations in pollutant load and composition are related due to the strong affinity of pollutants such as heavy metals and hydrocarbons for specific particle size ranges. As such, the temporal variation in particle size is identified as the key to establishing a basis for assessing build-up and wash-off process uncertainty. Therefore, accounting for pollutant build-up and wash-off process variability, which is influenced by particle size, would facilitate the assessment of the uncertainty associated with modelling outcomes. Furthermore, the review identified fundamental knowledge gaps where further research is needed in relation to: (1) the aggregation of particles suspended in the atmosphere during build-up; (2) particle re-suspension during wash-off; (3) pollutant re-adsorption by different particle size fractions; and (4) development of evidence-based techniques for assessing uncertainty; and (5) methods for translating the knowledge acquired from the investigation of process mechanisms at small scale into catchment scale for stormwater quality modelling. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Quality of health care, accreditation, and health technology assessment in Croatia: role of agency for quality and accreditation in health].

PubMed

Mittermayer, Renato; Huić, Mirjana; Mestrović, Josipa

2010-12-01

Avedis Donabedian defined the quality of care as the kind of care, which is expected to maximize an inclusive measure of patient welfare, after taking into account the balance of expected gains and losses associated with the process of care in all its segments. According to the World Medical Assembly, physicians and health care institutions have an ethical and professional obligation to strive for continuous quality improvement of services and patient safety with the ultimate goal to improve both individual patient outcomes as well as population health. Health technology assessment (HTA) is a multidisciplinary process that summarizes information about the medical, social, economic and ethical issues related to the use of a health technology in a systematic, transparent, unbiased, robust manner, with the aim to formulate safe and effective health policies that are patient focused and seek to achieve the highest value. The Agency for Quality and Accreditation in Health was established in 2007 as a legal, public, independent, nonprofit institution under the Act on Quality of Health Care. The Agency has three departments: Department of Quality and Education, Department of Accreditation, and Department of Development, Research, and Health Technology Assessment. According to the Act, the Agency should provide the procedure of granting, renewal and cancellation of accreditation of healthcare providers; proposing to the Minister, in cooperation with professional associations, the plan and program for healthcare quality assurance, improvement, promotion and monitoring; proposing the healthcare quality standards as well as the accreditation standards to the Minister; keeping a register of accreditations and providing a database related to accreditation, healthcare quality improvement, and education; providing education in the field of healthcare quality assurance, improvement and promotion; providing the HTA procedure and HTA database, supervising the healthcare insurance standards, and providing other services in the field of healthcare quality assurance, improvement, promotion and monitoring, according to the Act. Formal activities of the Agency in the field of HTA actually began in summer 2009. In the field of quality and accreditation, the plan and program of healthcare quality assurance, improvement, promotion and monitoring was finished and published in October 2010; preparation of the healthcare quality standards as well as the accreditation standards is still in process, with the aim to start accreditation process at 10 hospitals in 2011. Education in the field of healthcare quality assurance, improvement and promotion has been established as a continuous process from the beginning. The Agency is member of the International Society for Quality in Health Care (ISQua) and participates in the work of the European Accreditation Network (EAN). In the field of HTA, the Agency has established international collaboration and support, which resulted in its appointment and participation in the European network for Health Technology Assessment (EUnetHTA) Joint Action Project as a EUnetHTA Partner, as well as its membership in the international society, HTAi. TAIEX project has been approved as a two-day workshop in December 2010. The Croatian HTA Guidelines have been issued with the aim to start the HTA process and reports that should serve as recommendations, as a support to policy-makers at the national level, in particular the Croatian Ministry of Health and Social Welfare, and Croatian Institute of Health Insurance, in making evidence-informed decisions on the strategic planning, investment, management and implementation of technologies in health care, on funding (reimbursement) and coverage of health technologies, and at hospital level on the request from hospital directors and policy teams. In conclusion, establishment of all these measures in Croatia is by no means an easy and quick process, however, we do believe that it is feasible through continuous and close collaboration of all those involved.

Material condition assessment with eddy current sensors

NASA Technical Reports Server (NTRS)

Goldfine, Neil J. (Inventor); Washabaugh, Andrew P. (Inventor); Sheiretov, Yanko K. (Inventor); Schlicker, Darrell E. (Inventor); Lyons, Robert J. (Inventor); Windoloski, Mark D. (Inventor); Craven, Christopher A. (Inventor); Tsukernik, Vladimir B. (Inventor); Grundy, David C. (Inventor)

2010-01-01

Eddy current sensors and sensor arrays are used for process quality and material condition assessment of conducting materials. In an embodiment, changes in spatially registered high resolution images taken before and after cold work processing reflect the quality of the process, such as intensity and coverage. These images also permit the suppression or removal of local outlier variations. Anisotropy in a material property, such as magnetic permeability or electrical conductivity, can be intentionally introduced and used to assess material condition resulting from an operation, such as a cold work or heat treatment. The anisotropy is determined by sensors that provide directional property measurements. The sensor directionality arises from constructs that use a linear conducting drive segment to impose the magnetic field in a test material. Maintaining the orientation of this drive segment, and associated sense elements, relative to a material edge provides enhanced sensitivity for crack detection at edges.

The Judgement Processes Involved in the Moderation of Teacher-Assessed Projects

ERIC Educational Resources Information Center

Crisp, Victoria

2017-01-01

Classroom-based assessments have the potential to enhance validity by facilitating the assessment of important skills that are difficult to assess in written examinations. Such assessments tend to be marked by teachers. To ensure consistent marking standards, quality assurance procedures are needed. In the context of continued debate over the…

Method and apparatus for assessing weld quality

DOEpatents

Smartt, Herschel B.; Kenney, Kevin L.; Johnson, John A.; Carlson, Nancy M.; Clark, Denis E.; Taylor, Paul L.; Reutzel, Edward W.

2001-01-01

Apparatus for determining a quality of a weld produced by a welding device according to the present invention includes a sensor operatively associated with the welding device. The sensor is responsive to at least one welding process parameter during a welding process and produces a welding process parameter signal that relates to the at least one welding process parameter. A computer connected to the sensor is responsive to the welding process parameter signal produced by the sensor. A user interface operatively associated with the computer allows a user to select a desired welding process. The computer processes the welding process parameter signal produced by the sensor in accordance with one of a constant voltage algorithm, a short duration weld algorithm or a pulsed current analysis module depending on the desired welding process selected by the user. The computer produces output data indicative of the quality of the weld.

Automatic retinal interest evaluation system (ARIES).

PubMed

Yin, Fengshou; Wong, Damon Wing Kee; Yow, Ai Ping; Lee, Beng Hai; Quan, Ying; Zhang, Zhuo; Gopalakrishnan, Kavitha; Li, Ruoying; Liu, Jiang

2014-01-01

In recent years, there has been increasing interest in the use of automatic computer-based systems for the detection of eye diseases such as glaucoma, age-related macular degeneration and diabetic retinopathy. However, in practice, retinal image quality is a big concern as automatic systems without consideration of degraded image quality will likely generate unreliable results. In this paper, an automatic retinal image quality assessment system (ARIES) is introduced to assess both image quality of the whole image and focal regions of interest. ARIES achieves 99.54% accuracy in distinguishing fundus images from other types of images through a retinal image identification step in a dataset of 35342 images. The system employs high level image quality measures (HIQM) to perform image quality assessment, and achieves areas under curve (AUCs) of 0.958 and 0.987 for whole image and optic disk region respectively in a testing dataset of 370 images. ARIES acts as a form of automatic quality control which ensures good quality images are used for processing, and can also be used to alert operators of poor quality images at the time of acquisition.

A Qualitative Case Study on the Qualities of Effective Teacher Research in Teacher Screening and Interviewing Processes in Four Central Pennsylvania Public School Districts

ERIC Educational Resources Information Center

Treese, Matthew Paul

2012-01-01

Public school districts in Pennsylvania use varying teacher screening and interviewing processes for hiring teachers. In order to hire the best teacher candidates for vacancies, the qualities of effective teachers such as those cited by the Council of Chief State School Officers Interstate Teacher Assessment and Support Consortium (InTASC) Model…

Negotiating the COAPRT Learning Outcomes Transition Using Quality Management Tools: A Case Study of the COAPRT Beta Test Site

ERIC Educational Resources Information Center

Ellis, Gary D.

2014-01-01

This paper is a case study. It tells the story of the process that the Council on Accreditation for Parks, Recreation, Tourism and Related Professions beta test site created its learning outcomes assessment program. A planning process was used that has evolved from quality management philosophy and practice: DMADV. Use of DMADV required precise…

Group facilitation: building that winning team.

PubMed

Krumberger, J M

1992-12-01

Team building does not occur by chance; it involves using techniques to make it easier for members to contribute their expertise while working with others to achieve quality results. Evaluation of team effectiveness involves assessing both the processes (team interactions and work processes) and accomplishment of goals (out-comes; see box). Productivity and quality that could not be accomplished by individual efforts may be enhanced by effectively working teams.

Pedagogical Benefits of Fieldwork of the Students at the Faculty of Geography in the Light of the Bologna Process

ERIC Educational Resources Information Center

Andelkovic, Sladana; Dedjanski, Vojislav; Pejic, Biljana

2018-01-01

Students' opinion and assessment of the quality of teaching presents an important segment of the evaluation of the quality of teaching at university level in accordance with the principles of the Bologna Process. In this study, we have examined opinion of students at the Faculty of Geography, University of Belgrade on the pedagogical benefits of…

Validity evidence as a key marker of quality of technical skill assessment in OTL-HNS.

PubMed

Labbé, Mathilde; Young, Meredith; Nguyen, Lily H P

2018-01-13

Quality monitoring of assessment practices should be a priority in all residency programs. Validity evidence is one of the main hallmarks of assessment quality and should be collected to support the interpretation and use of assessment data. Our objective was to identify, synthesize, and present the validity evidence reported supporting different technical skill assessment tools in otolaryngology-head and neck surgery (OTL-HNS). We performed a secondary analysis of data generated through a systematic review of all published tools for assessing technical skills in OTL-HNS (n = 16). For each tool, we coded validity evidence according to the five types of evidence described by the American Educational Research Association's interpretation of Messick's validity framework. Descriptive statistical analyses were conducted. All 16 tools included in our analysis were supported by internal structure and relationship to variables validity evidence. Eleven articles presented evidence supporting content. Response process was discussed only in one article, and no study reported on evidence exploring consequences. We present the validity evidence reported for 16 rater-based tools that could be used for work-based assessment of OTL-HNS residents in the operating room. The articles included in our review were consistently deficient in evidence for response process and consequences. Rater-based assessment tools that support high-stakes decisions that impact the learner and programs should include several sources of validity evidence. Thus, use of any assessment should be done with careful consideration of the context-specific validity evidence supporting score interpretation, and we encourage deliberate continual assessment quality-monitoring. NA. Laryngoscope, 2018. © 2018 The American Laryngological, Rhinological and Otological Society, Inc.

Matters Arising. Australian University Quality Agency Feedback in Relation to the Academic Engagement of International Students Enrolled in Onshore University Programmes

ERIC Educational Resources Information Center

Crossman, Joanna; Burdett, Jane

2012-01-01

It is now commonplace to find quality audit processes being applied in universities internationally as a means of assessing the quality of teaching and learning. This article draws upon a thematic analysis of 14 second-round Australian Universities Quality Agency reports in order to explore matters arising from the academic engagement of…

Relationship between Internal Quality Audit and Quality Culture toward Implementation Consistency of ISO 9000 in Private College of Sulawesi Province, Indonesia

ERIC Educational Resources Information Center

Mail, Abdul; Pratikto; Suparman, Sudjito; Purnomo; Santoso, Budi

2014-01-01

The study aims to find out the influence of internal quality process on the growth of quality culture in private college. This study is treated toward 178 lecturers of 25 private colleges in Sulawesi, Indonesia by means of questionnaire. Confirmatory factor analysis applied to assess the reliability of validity and measurement model. Relationship…

The creation, management, and use of data quality information for life cycle assessment.

PubMed

Edelen, Ashley; Ingwersen, Wesley W

2018-04-01

Despite growing access to data, questions of "best fit" data and the appropriate use of results in supporting decision making still plague the life cycle assessment (LCA) community. This discussion paper addresses revisions to assessing data quality captured in a new US Environmental Protection Agency guidance document as well as additional recommendations on data quality creation, management, and use in LCA databases and studies. Existing data quality systems and approaches in LCA were reviewed and tested. The evaluations resulted in a revision to a commonly used pedigree matrix, for which flow and process level data quality indicators are described, more clarity for scoring criteria, and further guidance on interpretation are given. Increased training for practitioners on data quality application and its limits are recommended. A multi-faceted approach to data quality assessment utilizing the pedigree method alongside uncertainty analysis in result interpretation is recommended. A method of data quality score aggregation is proposed and recommendations for usage of data quality scores in existing data are made to enable improved use of data quality scores in LCA results interpretation. Roles for data generators, data repositories, and data users are described in LCA data quality management. Guidance is provided on using data with data quality scores from other systems alongside data with scores from the new system. The new pedigree matrix and recommended data quality aggregation procedure can now be implemented in openLCA software. Additional ways in which data quality assessment might be improved and expanded are described. Interoperability efforts in LCA data should focus on descriptors to enable user scoring of data quality rather than translation of existing scores. Developing and using data quality indicators for additional dimensions of LCA data, and automation of data quality scoring through metadata extraction and comparison to goal and scope are needed.

pySeismicDQA: open source post experiment data quality assessment and processing

NASA Astrophysics Data System (ADS)

Polkowski, Marcin

2017-04-01

Seismic Data Quality Assessment is python based, open source set of tools dedicated for data processing after passive seismic experiments. Primary goal of this toolset is unification of data types and formats from different dataloggers necessary for further processing. This process requires additional data checks for errors, equipment malfunction, data format errors, abnormal noise levels, etc. In all such cases user needs to decide (manually or by automatic threshold) if data is removed from output dataset. Additionally, output dataset can be visualized in form of website with data availability charts and waveform visualization with earthquake catalog (external). Data processing can be extended with simple STA/LTA event detection. pySeismicDQA is designed and tested for two passive seismic experiments in central Europe: PASSEQ 2006-2008 and "13 BB Star" (2013-2016). National Science Centre Poland provided financial support for this work via NCN grant DEC-2011/02/A/ST10/00284.

Assessment of mammographic film processor performance in a hospital and mobile screening unit.

PubMed

Murray, J G; Dowsett, D J; Laird, O; Ennis, J T

1992-12-01

In contrast to the majority of mammographic breast screening programmes, film processing at this centre occurs on site in both hospital and mobile trailer units. Initial (1989) quality control (QC) sensitometric tests revealed a large variation in film processor performance in the mobile unit. The clinical significance of these variations was assessed and acceptance limits for processor performance determined. Abnormal mammograms were used as reference material and copied using high definition 35 mm film over a range of exposure settings. The copies were than matched with QC film density variation from the mobile unit. All films were subsequently ranked for spatial and contrast resolution. Optimal values for processing time of 2 min (equivalent to film transit time 3 min and developer time 46 s) and temperature of 36 degrees C were obtained. The widespread anomaly of reporting film transit time as processing time is highlighted. Use of mammogram copies as a means of measuring the influence of film processor variation is advocated. Careful monitoring of the mobile unit film processor performance has produced stable quality comparable with the hospital based unit. The advantages of on site film processing are outlined. The addition of a sensitometric step wedge to all mammography film stock as a means of assessing image quality is recommended.

Is the 'driving test' a robust quality indicator of colonoscopy performance?

PubMed

Kelly, Nicholas M; Moorehead, John; Tham, Tony

2010-04-16

Colorectal cancer is a major cause of death in the western world and is currently the second commonest cause of death from malignant disease in the UK. Recently a "driving test" for colonoscopists wishing to take part in the National Health Service Bowel Cancer Screening Program has been introduced, with the aim of improving quality in colonoscopy. We describe the accreditation process and have reviewed the published evidence for its use. We compared this method of assessment to what occurs in other developed countries. To the authors' knowledge no other countries have similar methods of assessment of practicing colonoscopists, and instead use critical evaluation of key quality criteria. The UK appears to have one of the most rigorous accreditation processes, although this still has flaws. The published evidence suggests that the written part of the accreditation is not a good discriminating test and it needs to be improved or abandoned. Further work is needed on the best methods of assessing polypectomy skills. Rigorous systems need to be in place for the colonoscopist who fails the assessment.

Nonprofit Hospitals’ Approach to Community Health Needs Assessment

PubMed Central

McLeroy, Kenneth R.; Burdine, James N.; Matarrita-Cascante, David

2015-01-01

Objectives. We sought a better understanding of how nonprofit hospitals are fulfilling the community health needs assessment (CHNA) provision of the 2010 Patient Protection and Affordable Care Act to conduct CHNAs and develop CHNA and implementation strategies reports. Methods. Through an Internet search of an estimated 179 nonprofit hospitals in Texas conducted between December 1, 2013, and January 5, 2014, we identified and reviewed 95 CHNA and implementation strategies reports. We evaluated and scored reports with specific criteria. We analyzed hospital-related and other report characteristics to understand relationships with report quality. Results. There was wide-ranging diversity in CHNA approaches and report quality. Consultant-led CHNA processes and collaboration with local health departments were associated with higher-quality reports. Conclusions. At the time of this study, the Internal Revenue Service had not yet issued the final regulations for the CHNA requirement. This provides an opportunity to strengthen the CHNA guidance for the final regulations, clarify the purpose of the assessment and planning process and reports, and better align assessment and planning activities through a public health framework. PMID:25602862

Software Quality Assurance Metrics

NASA Technical Reports Server (NTRS)

McRae, Kalindra A.

2004-01-01

Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

Do European hospitals have quality and safety governance systems and structures in place?

PubMed

Shaw, C; Kutryba, B; Crisp, H; Vallejo, P; Suñol, R

2009-02-01

Internal systems for quality and safety were assessed in 89 hospitals in six European states, by external teams using standardised criteria and procedures, as part of the Methods of Assessing Response to Quality Improvement Strategies (MARQuIS) project. The assessments were made primarily to identify the current use of quality management systems in the sample hospitals, and also to demonstrate a potential tool for comparable assessment of hospitals in general. The large majority of the hospitals had a formal, documented infrastructure to manage quality and safety, but a significant minority had no designated mission, programme or coordination. In two-thirds of hospitals, the governing body was active in defining policy and programmes for improvement, and received reports on quality, safety and patient satisfaction at least once a year. The brief on-site assessments identified systematic variations, within and between countries, in structures and processes of governance and to document the uptake of best practice. Unacceptable variations in practice could be reduced, to the benefit of consumers and providers, by developing and publishing basic organisational standards relevant to all European states. The simple assessment criteria designed for this project could be developed into a practical tool for self-assessment, peer review or benchmarking of hospitals across national borders. This assessment, combined with explicit, relevant and achievable standards, could provide a vehicle to promote the voluntary uptake of best practice and consistency in quality and safety among hospitals in Europe.

Benefits of a comprehensive quality program for cryopreserved PBMC covering 28 clinical trials sites utilizing an integrated, analytical web-based portal

PubMed Central

Ducar, Constance; Smith, Donna; Pinzon, Cris; Stirewalt, Michael; Cooper, Cristine; McElrath, M. Juliana; Hural, John

2014-01-01

The HIV Vaccine Trials Network (HVTN) is a global network of 28 clinical trial sites dedicated to identifying an effective HIV vaccine. Cryopreservation of high-quality peripheral blood mononuclear cells (PBMC) is critical for the assessment of vaccine-induced cellular immune functions. The HVTN PBMC Quality Management Program is designed to ensure viable PBMC are processed, stored and shipped for clinical trial assays from all HVTN clinical trial sites. The program has evolved by developing and incorporating best practices for laboratory and specimen quality and implementing automated, web-based tools. These tools allow the site-affiliated processing laboratories and the central Laboratory Operations Unit to rapidly collect, analyze and report PBMC quality data. The HVTN PBMC Quality Management Program includes five key components: 1) Laboratory Assessment, 2) PBMC Training and Certification, 3) Internal Quality Control, 4) External Quality Control (EQC), and 5) Assay Specimen Quality Control. Fresh PBMC processing data is uploaded from each clinical site processing laboratory to a central HVTN Statistical and Data Management Center database for access and analysis on a web portal. Samples are thawed at a central laboratory for assay or specimen quality control and sample quality data is uploaded directly to the database by the central laboratory. Four year cumulative data covering 23,477 blood draws reveals an average fresh PBMC yield of 1.45×106 ±0.48 cells per milliliter of useable whole blood. 95% of samples were within the acceptable range for fresh cell yield of 0.8–3.2×106 cells/ml of usable blood. Prior to full implementation of the HVTN PBMC Quality Management Program, the 2007 EQC evaluations from 10 international sites showed a mean day 2 thawed viability of 83.1% and recovery of 67.5%. Since then, four year cumulative data covering 3338 specimens used in immunologic assays shows that 99.88% had acceptable viabilities (>66%) for use in cellular assays (mean, 91.46% ±4.5%), and 96.2% had acceptable recoveries (50%–130%) with a mean of recovery of 85.8% ±19.12% of the originally cryopreserved cells. EQC testing revealed that since August 2009, failed recoveries dropped from 4.1% to 1.6% and failed viabilities dropped from 1.0% to 0.3%. The HVTN PBMC quality program provides for laboratory assessment, training and tools for identifying problems, implementing corrective action and monitoring for improvements. These data support the benefits of implementing a comprehensive, web-based PBMC quality program for large clinical trials networks. PMID:24709391

Quality control and quality assurance plan for bridge channel-stability assessments in Massachusetts

USGS Publications Warehouse

Parker, Gene W.; Pinson, Harlow

1993-01-01

A quality control and quality assurance plan has been implemented as part of the Massachusetts bridge scour and channel-stability assessment program. This program is being conducted by the U.S. Geological Survey, Massachusetts-Rhode Island District, in cooperation with the Massachusetts Highway Department. Project personnel training, data-integrity verification, and new data-management technologies are being utilized in the channel-stability assessment process to improve current data-collection and management techniques. An automated data-collection procedure has been implemented to standardize channel-stability assessments on a regular basis within the State. An object-oriented data structure and new image management tools are used to produce a data base enabling management of multiple data object classes. Data will be reviewed by assessors and data base managers before being merged into a master bridge-scour data base, which includes automated data-verification routines.

Prioritizing Information for Quality Improvement Using Resident Assessment Instrument Data: Experiences in One Canadian Province

PubMed Central

Sales, Anne; O'Rourke, Hannah M.; Draper, Kellie; Teare, Gary F.; Maxwell, Colleen

2011-01-01

Purpose: To elicit priority rankings of indicators of quality of care among providers and decision-makers in continuing care in Alberta, Canada. Methods: We used modified nominal group technique to elicit priorities and criteria for prioritization among the quality indicators and resident/client assessment protocols developed by the interRAI consortium for use in long-term care and home care. Results: The top-ranked items from the long-term care assessment data were pressure ulcers, pain and incontinence. The top-ranked items from the home care data were pain, falls and proportion of clients at high risk for residential placement. Participants considered a variety of issues in deciding how to rank the indicators. Implications: This work reflects the beginning of a process to better understand how providers and policy makers can work together to assess priorities for quality improvement within continuing care. PMID:22294992

[Quality indicators in the acute coronary syndrome for the analysis of the pre- and in-hospital care process].

PubMed

Felices-Abad, F; Latour-Pérez, J; Fuset-Cabanes, M P; Ruano-Marco, M; Cuñat-de la Hoz, J; del Nogal-Sáez, F

2010-01-01

We present a map of 27 indicators to measure the care quality given to patients with acute coronary syndrome attended in the pre- and hospital area. This includes technical process indicators (registration of care intervals, performance of electrocardiogram, monitoring and vein access, assessment of prognostic risk, hemorrhage and in-hospital mortality, use of reperfusion techniques and performance of echocardiograph), pharmacological process indicators (platelet receptors inhibition, anticoagulation, thrombolysis, beta-blockers, angiotensin converting inhibitors and lipid lowering drugs) and outcomes indicators (quality scales of the care given and mortality). Copyright © 2010 Elsevier España, S.L. y SEMICYUC. All rights reserved.

PATRAM '80. Proceedings. Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huebner, H.W.

Volume 1 contains papers from the following sessions: Plenary Session; Regulations, Licensing and Standards; LMFBR Systems Concepts; Risk/Safety Assessment I; Systems and Package Design; US Institutional Issues; Risk/Safety Assessment II; Leakage, Leak Rate and Seals; Poster Session A; Operations and Systems Experience I; Manufacturing Processes and Materials; and Quality Assurance and Maintenance. Individual papers were processed. (LM)

Assessment of Automatically Exported Clinical Data from a Hospital Information System for Clinical Research in Multiple Myeloma.

PubMed

Torres, Viviana; Cerda, Mauricio; Knaup, Petra; Löpprich, Martin

2016-01-01

An important part of the electronic information available in Hospital Information System (HIS) has the potential to be automatically exported to Electronic Data Capture (EDC) platforms for improving clinical research. This automation has the advantage of reducing manual data transcription, a time consuming and prone to errors process. However, quantitative evaluations of the process of exporting data from a HIS to an EDC system have not been reported extensively, in particular comparing with manual transcription. In this work an assessment to study the quality of an automatic export process, focused in laboratory data from a HIS is presented. Quality of the laboratory data was assessed in two types of processes: (1) a manual process of data transcription, and (2) an automatic process of data transference. The automatic transference was implemented as an Extract, Transform and Load (ETL) process. Then, a comparison was carried out between manual and automatic data collection methods. The criteria to measure data quality were correctness and completeness. The manual process had a general error rate of 2.6% to 7.1%, obtaining the lowest error rate if data fields with a not clear definition were removed from the analysis (p < 10E-3). In the case of automatic process, the general error rate was 1.9% to 12.1%, where lowest error rate is obtained when excluding information missing in the HIS but transcribed to the EDC from other physical sources. The automatic ETL process can be used to collect laboratory data for clinical research if data in the HIS as well as physical documentation not included in HIS, are identified previously and follows a standardized data collection protocol.

42 CFR 460.120 - Grievance process.

Code of Federal Regulations, 2010 CFR

2010-10-01

... written or oral, expressing dissatisfaction with service delivery or the quality of care furnished. (a... proceedings. This information must be used in the PACE organization's internal quality assessment and... Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED...

Positional Quality Assessment of Orthophotos Obtained from Sensors Onboard Multi-Rotor UAV Platforms

PubMed Central

Mesas-Carrascosa, Francisco Javier; Rumbao, Inmaculada Clavero; Berrocal, Juan Alberto Barrera; Porras, Alfonso García-Ferrer

2014-01-01

In this study we explored the positional quality of orthophotos obtained by an unmanned aerial vehicle (UAV). A multi-rotor UAV was used to obtain images using a vertically mounted digital camera. The flight was processed taking into account the photogrammetry workflow: perform the aerial triangulation, generate a digital surface model, orthorectify individual images and finally obtain a mosaic image or final orthophoto. The UAV orthophotos were assessed with various spatial quality tests used by national mapping agencies (NMAs). Results showed that the orthophotos satisfactorily passed the spatial quality tests and are therefore a useful tool for NMAs in their production flowchart. PMID:25587877

Positional quality assessment of orthophotos obtained from sensors onboard multi-rotor UAV platforms.

PubMed

Mesas-Carrascosa, Francisco Javier; Rumbao, Inmaculada Clavero; Berrocal, Juan Alberto Barrera; Porras, Alfonso García-Ferrer

2014-11-26

In this study we explored the positional quality of orthophotos obtained by an unmanned aerial vehicle (UAV). A multi-rotor UAV was used to obtain images using a vertically mounted digital camera. The flight was processed taking into account the photogrammetry workflow: perform the aerial triangulation, generate a digital surface model, orthorectify individual images and finally obtain a mosaic image or final orthophoto. The UAV orthophotos were assessed with various spatial quality tests used by national mapping agencies (NMAs). Results showed that the orthophotos satisfactorily passed the spatial quality tests and are therefore a useful tool for NMAs in their production flowchart.

Effects of a computerized cardiac teletriage decision support system on nurse performance: results of a controlled human factors experiment using a mid-fidelity prototype.

PubMed

Somoza, Kirsten Carroll; Momtahan, Kathryn; Lindgaard, Gitte

2007-01-01

A gap exists in cardiac care between known best practices and the actual level of care administered. To help bridge this gap, a proof of concept interface for a PDA-based decision support system (DSS) was designed for cardiac care nurses engaged in teletriage. This interface was developed through a user-centered design process. Quality of assessment, quality of recommendations, and number of questions asked were measured. Cardiac floor nurses' assessment quality performance, but not their recommendation quality performance, improved with the DSS. Nurses asked more questions with the DSS than without it, and these additional questions were predominantly classifiable as essential or beneficial to a good assessment. The average participant satisfaction score with the DSS was above neutral.

Cost Models for MMC Manufacturing Processes

NASA Technical Reports Server (NTRS)

Elzey, Dana M.; Wadley, Haydn N. G.

1996-01-01

Processes for the manufacture of advanced metal matrix composites are rapidly approaching maturity in the research laboratory and there is growing interest in their transition to industrial production. However, research conducted to date has almost exclusively focused on overcoming the technical barriers to producing high-quality material and little attention has been given to the economical feasibility of these laboratory approaches and process cost issues. A quantitative cost modeling (QCM) approach was developed to address these issues. QCM are cost analysis tools based on predictive process models relating process conditions to the attributes of the final product. An important attribute, of the QCM approach is the ability to predict the sensitivity of material production costs to product quality and to quantitatively explore trade-offs between cost and quality. Applications of the cost models allow more efficient direction of future MMC process technology development and a more accurate assessment of MMC market potential. Cost models were developed for two state-of-the art metal matrix composite (MMC) manufacturing processes: tape casting and plasma spray deposition. Quality and Cost models are presented for both processes and the resulting predicted quality-cost curves are presented and discussed.

A Systematic Approach of Employing Quality by Design Principles: Risk Assessment and Design of Experiments to Demonstrate Process Understanding and Identify the Critical Process Parameters for Coating of the Ethylcellulose Pseudolatex Dispersion Using Non-Conventional Fluid Bed Process.

PubMed

Kothari, Bhaveshkumar H; Fahmy, Raafat; Claycamp, H Gregg; Moore, Christine M V; Chatterjee, Sharmista; Hoag, Stephen W

2017-05-01

The goal of this study was to utilize risk assessment techniques and statistical design of experiments (DoE) to gain process understanding and to identify critical process parameters for the manufacture of controlled release multiparticulate beads using a novel disk-jet fluid bed technology. The material attributes and process parameters were systematically assessed using the Ishikawa fish bone diagram and failure mode and effect analysis (FMEA) risk assessment methods. The high risk attributes identified by the FMEA analysis were further explored using resolution V fractional factorial design. To gain an understanding of the processing parameters, a resolution V fractional factorial study was conducted. Using knowledge gained from the resolution V study, a resolution IV fractional factorial study was conducted; the purpose of this IV study was to identify the critical process parameters (CPP) that impact the critical quality attributes and understand the influence of these parameters on film formation. For both studies, the microclimate, atomization pressure, inlet air volume, product temperature (during spraying and curing), curing time, and percent solids in the coating solutions were studied. The responses evaluated were percent agglomeration, percent fines, percent yield, bead aspect ratio, median particle size diameter (d50), assay, and drug release rate. Pyrobuttons® were used to record real-time temperature and humidity changes in the fluid bed. The risk assessment methods and process analytical tools helped to understand the novel disk-jet technology and to systematically develop models of the coating process parameters like process efficiency and the extent of curing during the coating process.

Particulate organic matter quality influences nitrate retention and denitrification in stream sediments: evidence from a carbon burial experiment

USGS Publications Warehouse

Stelzer, Robert S.; Scott, J. Thad; Bartsch, Lynn; Parr, Thomas B.

2014-01-01

Organic carbon supply is linked to nitrogen transformation in ecosystems. However, the role of organic carbon quality in nitrogen processing is not as well understood. We determined how the quality of particulate organic carbon (POC) influenced nitrogen transformation in stream sediments by burying identical quantities of varying quality POC (northern red oak (Quercus rubra) leaves, red maple (Acer rubrum) leaves, red maple wood) in stream mesocosms and measuring the effects on nitrogen retention and denitrification compared to a control of combusted sand. We also determined how POC quality affected the quantity and quality of dissolved organic carbon (DOC) and dissolved oxygen concentration in groundwater. Nitrate and total dissolved nitrogen (TDN) retention were assessed by comparing solute concentrations and fluxes along groundwater flow paths in the mesocosms. Denitrification was measured by in situ changes in N2 concentrations (using MIMS) and by acetylene block incubations. POC quality was measured by C:N and lignin:N ratios and DOC quality was assessed by fluorescence excitation emission matrix spectroscopy. POC quality had strong effects on nitrogen processing. Leaf treatments had much higher nitrate retention, TDN retention and denitrification rates than the wood and control treatments and red maple leaf burial resulted in higher nitrate and TDN retention rates than burial of red oak leaves. Leaf, but not wood, burial drove pore water to severe hypoxia and leaf treatments had higher DOC production and different DOC chemical composition than the wood and control treatments. We think that POC quality affected nitrogen processing in the sediments by influencing the quantity and quality of DOC and redox conditions. Our results suggest that the type of organic carbon inputs can affect the rates of nitrogen transformation in stream ecosystems.

TU-FG-201-12: Designing a Risk-Based Quality Assurance Program for a Newly Implemented Y-90 Microspheres Procedure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vile, D; Zhang, L; Cuttino, L

2016-06-15

Purpose: To create a quality assurance program based upon a risk-based assessment of a newly implemented SirSpheres Y-90 procedure. Methods: A process map was created for a newly implemented SirSpheres procedure at a community hospital. The process map documented each step of this collaborative procedure, as well as the roles and responsibilities of each member. From the process map, different potential failure modes were determined as well as any current controls in place. From this list, a full failure mode and effects analysis (FMEA) was performed by grading each failure mode’s likelihood of occurrence, likelihood of detection, and potential severity.more » These numbers were then multiplied to compute the risk priority number (RPN) for each potential failure mode. Failure modes were then ranked based on their RPN. Additional controls were then added, with failure modes corresponding to the highest RPNs taking priority. Results: A process map was created that succinctly outlined each step in the SirSpheres procedure in its current implementation. From this, 72 potential failure modes were identified and ranked according to their associated RPN. Quality assurance controls and safety barriers were then added for failure modes associated with the highest risk being addressed first. Conclusion: A quality assurance program was created from a risk-based assessment of the SirSpheres process. Process mapping and FMEA were effective in identifying potential high-risk failure modes for this new procedure, which were prioritized for new quality assurance controls. TG 100 recommends the fault tree analysis methodology to design a comprehensive and effective QC/QM program, yet we found that by simply introducing additional safety barriers to address high RPN failure modes makes the whole process simpler and safer.« less

Comparison of Acid Titration, Conductivity, Flame Photometry, ICP-MS, and Accelerated Lamellae Formation Techniques in Determining Glass Vial Quality.

PubMed

Fujimori, Kiyoshi; Lee, Hans; Sloey, Christopher; Ricci, Margaret S; Wen, Zai-Qing; Phillips, Joseph; Nashed-Samuel, Yasser

2016-01-01

Certain types of glass vials used as primary containers for liquid formulations of biopharmaceutical drug products have been observed with delamination that produced small glass like flakes termed lamellae under certain conditions during storage. The cause of this delamination is in part related to the glass surface defects, which renders the vials susceptible to flaking, and lamellae are formed during the high-temperature melting and annealing used for vial fabrication and shaping. The current European Pharmacopoeia method to assess glass vial quality utilizes acid titration of vial extract pools to determine hydrolytic resistance or alkalinity. Four alternative techniques with improved throughput, convenience, and/or comprehension were examined by subjecting seven lots of vials to analysis by all techniques. The first three new techniques of conductivity, flame photometry, and inductively coupled plasma mass spectrometry measured the same sample pools as acid titration. All three showed good correlation with alkalinity: conductivity (R(2) = 0.9951), flame photometry sodium (R(2) = 0.9895), and several elements by inductively coupled plasma mass spectrometry [(sodium (R(2) = 0.9869), boron (R(2) = 0.9796), silicon (R(2) = 0.9426), total (R(2) = 0.9639)]. The fourth technique processed the vials under conditions that promote delamination, termed accelerated lamellae formation, and then inspected those vials visually for lamellae. The visual inspection results without the lot with different processing condition correlated well with alkalinity (R(2) = 0.9474). Due to vial processing differences affecting alkalinity measurements and delamination propensity differently, the ratio of silicon and sodium measurements from inductively coupled plasma mass spectrometry was the most informative technique to assess overall vial quality and vial propensity for lamellae formation. The other techniques of conductivity, flame photometry, and accelerated lamellae formation condition may still be suitable for routine screening of vial lots produced under consistent processes. Recently, delamination that produced small glass like flakes termed lamellae has been observed in glass vials that are commonly used as primary containers for pharmaceutical drug products under certain conditions during storage. The main cause of these lamellae was the quality of the glass itself related to the manufacturing process. Current European Pharmacopoeia method to assess glass vial quality utilizes acid titration of vial extract pools to determine hydrolytic resistance or alkalinity. As alternative to the European Pharmacopoeia method, four other techniques were assessed. Three new techniques of conductivity, flame photometry, and inductively coupled plasma mass spectrometry measured the vial extract pool as acid titration to quantify quality, and they demonstrated good correlation with original alkalinity. The fourth technique processed the vials under conditions that promote delamination, termed accelerated lamellae formation, and the vials were then inspected visually for lamellae. The accelerated lamellae formation technique also showed good correlation with alkalinity. Of the new four techniques, inductively coupled plasma mass spectrometry was the most informative technique to assess overall vial quality even with differences in processing between vial lots. Other three techniques were still suitable for routine screening of vial lots produced under consistent processes. © PDA, Inc. 2016.

Evaluation of AMSTAR to assess the methodological quality of systematic reviews in overviews of reviews of healthcare interventions.

PubMed

Pollock, Michelle; Fernandes, Ricardo M; Hartling, Lisa

2017-03-23

Overviews of reviews (overviews) compile information from multiple systematic reviews (SRs) to provide a single synthesis of relevant evidence for decision-making. It is recommended that authors assess and report the methodological quality of SRs in overviews-for example, using A MeaSurement Tool to Assess systematic Reviews (AMSTAR). Currently, there is variation in whether and how overview authors assess and report SR quality, and limited guidance is available. Our objectives were to: examine methodological considerations involved in using AMSTAR to assess the quality of Cochrane and non-Cochrane SRs in overviews of healthcare interventions; identify challenges (and develop potential decision rules) when using AMSTAR in overviews; and examine the potential impact of considering methodological quality when making inclusion decisions in overviews. We selected seven overviews of healthcare interventions and included all SRs meeting each overview's inclusion criteria. For each SR, two reviewers independently conducted AMSTAR assessments with consensus and discussed challenges encountered. We also examined the correlation between AMSTAR assessments and SR results/conclusions. Ninety-five SRs were included (30 Cochrane, 65 non-Cochrane). Mean AMSTAR assessments (9.6/11 vs. 5.5/11; p < 0.001) and inter-rater reliability (AC1 statistic: 0.84 vs. 0.69; "almost perfect" vs. "substantial" using the Landis & Koch criteria) were higher for Cochrane compared to non-Cochrane SRs. Four challenges were identified when applying AMSTAR in overviews: the scope of the SRs and overviews often differed; SRs examining similar topics sometimes made different methodological decisions; reporting of non-Cochrane SRs was sometimes poor; and some non-Cochrane SRs included other SRs as well as primary studies. Decision rules were developed to address each challenge. We found no evidence that AMSTAR assessments were correlated with SR results/conclusions. Results indicate that the AMSTAR tool can be used successfully in overviews that include Cochrane and non-Cochrane SRs, though decision rules may be useful to circumvent common challenges. Findings support existing recommendations that quality assessments of SRs in overviews be conducted independently, in duplicate, with a process for consensus. Results also suggest that using methodological quality to guide inclusion decisions (e.g., to exclude poorly conducted and reported SRs) may not introduce bias into the overview process.

Assessing and Managing Quality of Information Assurance

DTIC Science & Technology

2010-11-01

such as firewalls, antivirus scanning tools and mechanisms for user authentication and authorization. Advanced mission-critical systems often...imply increased risk to DoD information systems. The Process and Organizational Maturity (POM) class focuses on the maturity of the software and...include architectural quality. Common Weakness Enumeration (CWE) is a recent example that highlights the connection between software quality and

7 CFR 1940.318 - Completing environmental assessments for Class II actions.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Throughout this assessment process, the preparer will keep in mind the criteria for determining a significant... action has the potential for significantly affecting the quality of the human environment or will...

Activities of daily living in children with hemiparesis: influence of cognitive abilities and motor competence.

PubMed

Adler, Caroline; Rauchenzauner, Markus; Staudt, Martin; Berweck, Steffen

2014-12-01

The aim of the article is to investigate whether motor competence and cognitive abilities influence the quality of performance of activities of daily living (ADL) in children with hemiparesis. Patients and A total of 20 children with hemiparesis (age, 6-12 years; 11 congenital, 9 acquired during childhood) were studied. Motor competence was assessed with the Assisting Hand Assessment, cognitive abilities with the German version of the Wechsler Intelligence Scale for Children IV, and the quality of ADL performance with the Assessment of Motor and Process Skills (AMPS). The motor skills scale of the AMPS correlated with motor competence, and the process skills scale of the AMPS correlated with cognitive abilities. The quality of ADL performance is influenced not only by motor competence but also by the cognitive abilities of a hemiparetic child. This suggests that, in addition to motor-oriented training programs, an optimal therapy for hemiparetic children should also consider cognitive approaches. Georg Thieme Verlag KG Stuttgart · New York.

Assessment and prediction of air quality using fuzzy logic and autoregressive models

NASA Astrophysics Data System (ADS)

Carbajal-Hernández, José Juan; Sánchez-Fernández, Luis P.; Carrasco-Ochoa, Jesús A.; Martínez-Trinidad, José Fco.

2012-12-01

In recent years, artificial intelligence methods have been used for the treatment of environmental problems. This work, presents two models for assessment and prediction of air quality. First, we develop a new computational model for air quality assessment in order to evaluate toxic compounds that can harm sensitive people in urban areas, affecting their normal activities. In this model we propose to use a Sigma operator to statistically asses air quality parameters using their historical data information and determining their negative impact in air quality based on toxicity limits, frequency average and deviations of toxicological tests. We also introduce a fuzzy inference system to perform parameter classification using a reasoning process and integrating them in an air quality index describing the pollution levels in five stages: excellent, good, regular, bad and danger, respectively. The second model proposed in this work predicts air quality concentrations using an autoregressive model, providing a predicted air quality index based on the fuzzy inference system previously developed. Using data from Mexico City Atmospheric Monitoring System, we perform a comparison among air quality indices developed for environmental agencies and similar models. Our results show that our models are an appropriate tool for assessing site pollution and for providing guidance to improve contingency actions in urban areas.

Determination of the performance of vermicomposting process applied to sewage sludge by monitoring of the compost quality and immune responses in three earthworm species: Eisenia fetida, Eisenia andrei and Dendrobaena veneta.

PubMed

Suleiman, Hanine; Rorat, Agnieszka; Grobelak, Anna; Grosser, Anna; Milczarek, Marcin; Płytycz, Barbara; Kacprzak, Małgorzata; Vandenbulcke, Franck

2017-10-01

The aim of this study was to assess the effectiveness of vermicomposting process applied on three different sewage sludge (precomposted with grass clippings, sawdust and municipal solid wastes) using three different earthworm species. Selected immune parameters, namely biomarkers of stress and metal body burdens, have been used to biomonitor the vermicomposting process and to assess the impact of contaminants on earthworm's physiology. Biotic and abiotic parameters were also used in order to monitor the process and the quality of the final product. Dendrobaena veneta exhibited much lower resistance in all experimental conditions, as the bodyweight and the total number of circulating immune cells decreased in the most contaminated conditions. All earthworm species accumulated heavy metals as follows Cd>Co>Cu>Zn>Ni>Pb>Cr: Eisenia sp. worms exhibited the highest ability to accumulate several heavy metals. Vermicompost obtained after 45days was acceptable according to agronomic parameters and to compost quality norms in France and Poland. Copyright © 2017 Elsevier Ltd. All rights reserved.

Assessment of data processing to improve reliability of microarray experiments using genomic DNA reference.

PubMed

Yang, Yunfeng; Zhu, Mengxia; Wu, Liyou; Zhou, Jizhong

2008-09-16

Using genomic DNA as common reference in microarray experiments has recently been tested by different laboratories. Conflicting results have been reported with regard to the reliability of microarray results using this method. To explain it, we hypothesize that data processing is a critical element that impacts the data quality. Microarray experiments were performed in a gamma-proteobacterium Shewanella oneidensis. Pair-wise comparison of three experimental conditions was obtained either with two labeled cDNA samples co-hybridized to the same array, or by employing Shewanella genomic DNA as a standard reference. Various data processing techniques were exploited to reduce the amount of inconsistency between both methods and the results were assessed. We discovered that data quality was significantly improved by imposing the constraint of minimal number of replicates, logarithmic transformation and random error analyses. These findings demonstrate that data processing significantly influences data quality, which provides an explanation for the conflicting evaluation in the literature. This work could serve as a guideline for microarray data analysis using genomic DNA as a standard reference.

Increasing the Number of Outpatients Receiving Spiritual Assessment: A Pain and Palliative Care Service Quality Improvement Project.

PubMed

Gomez-Castillo, Blanca J; Hirsch, Rosemarie; Groninger, Hunter; Baker, Karen; Cheng, M Jennifer; Phillips, Jayne; Pollack, John; Berger, Ann M

2015-11-01

Spirituality is a patient need that requires special attention from the Pain and Palliative Care Service team. This quality improvement project aimed to provide spiritual assessment for all new outpatients with serious life-altering illnesses. Percentage of new outpatients receiving spiritual assessment (Faith, Importance/Influence, Community, Address/Action in care, psychosocial evaluation, chaplain consults) at baseline and postinterventions. Interventions included encouraging clinicians to incorporate adequate spiritual assessment into patient care and implementing chaplain covisits for all initial outpatient visits. The quality improvement interventions increased spiritual assessment (baseline vs. postinterventions): chaplain covisits (25.5% vs. 50%), Faith, Importance/Influence, Community, Address/Action in care completion (49% vs. 72%), and psychosocial evaluation (89% vs. 94%). Improved spiritual assessment in an outpatient palliative care clinic setting can occur with a multidisciplinary approach. This project also identifies data collection and documentation processes that can be targeted for improvement. Published by Elsevier Inc.

Validation of an organizational communication climate assessment toolkit.

PubMed

Wynia, Matthew K; Johnson, Megan; McCoy, Thomas P; Griffin, Leah Passmore; Osborn, Chandra Y

2010-01-01

Effective communication is critical to providing quality health care and can be affected by a number of modifiable organizational factors. The authors performed a prospective multisite validation study of an organizational communication climate assessment tool in 13 geographically and ethnically diverse health care organizations. Communication climate was measured across 9 discrete domains. Patient and staff surveys with matched items in each domain were developed using a national consensus process, which then underwent psychometric field testing and assessment of domain coherence. The authors found meaningful within-site and between-site performance score variability in all domains. In multivariable models, most communication domains were significant predictors of patient-reported quality of care and trust. The authors conclude that these assessment tools provide a valid empirical assessment of organizational communication climate in 9 domains. Assessment results may be useful to track organizational performance, to benchmark, and to inform tailored quality improvement interventions.

Doctors on the move: a European case study on the key characteristics of national recertification systems

PubMed Central

Govaerts, Marjan J; Mitchell, Sharon; Rohde, Gernot G U; Smeenk, Frank W J M; Driessen, Erik W

2018-01-01

Objectives With increased cross-border movement, ensuring safe and high-quality healthcare has gained primacy. The purpose of recertification is to ensure quality of care through periodically attesting doctors’ professional proficiency in their field. Professional migration and facilitated cross-border recognition of qualifications, however, make us question the fitness of national policies for safeguarding patient care and the international accountability of doctors. Design and setting We performed document analyses and conducted 19 semistructured interviews to identify and describe key characteristics and effective components of 10 different European recertification systems, each representing one case (collective case study). We subsequently compared these systems to explore similarities and differences in terms of assessment criteria used to determine process quality. Results Great variety existed between countries in terms and assessment formats used, targeting cognition, competence and performance (Miller’s assessment pyramid). Recertification procedures and requirements also varied significantly, ranging from voluntary participation in professional development modules to the mandatory collection of multiple performance data in a competency-based portfolio. Knowledge assessment was fundamental to recertification in most countries. Another difference concerned the stakeholders involved in the recertification process: while some systems exclusively relied on doctors’ self-assessment, others involved multiple stakeholders but rarely included patients in assessment of doctors’ professional competence. Differences between systems partly reflected different goals and primary purposes of recertification. Conclusion Recertification systems differ substantially internationally with regard to the criteria they apply to assess doctors’ competence, their aims, requirements, assessment formats and patient involvement. In the light of professional mobility and associated demands for accountability, we recommend that competence assessment includes patients’ perspectives, and recertification practices be shared internationally to enhance transparency. This can help facilitate cross-border movement, while guaranteeing high-quality patient care. PMID:29666131

Reconsidering the psychometrics of quality of life assessment in light of response shift and appraisal

PubMed Central

Schwartz, Carolyn E; Rapkin, Bruce D

2004-01-01

The increasing evidence for response shift phenomena in quality of life (QOL) assessment points to the necessity to reconsider both the measurement model and the application of psychometric analyses. The proposed psychometric model posits that the QOL true score is always contingent upon parameters of the appraisal process. This new model calls into question existing methods for establishing the reliability and validity of QOL assessment tools and suggests several new approaches for describing the psychometric properties of these scales. Recommendations for integrating the assessment of appraisal into QOL research and clinical practice are discussed. PMID:15038830

Development and quality assessments of commercial heat production of ATF FeCrAl tubes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamamoto, Yukinori

2015-09-01

Development and quality assessment of the 2 nd generation ATF FeCrAl tube production with commercial manufacturers were conducted. The manufacturing partners include Sophisticated Alloys, Inc. (SAI), Butler, PA for FeCrAl alloy casting via vacuum induction melting, Oak Ridge National Laboratory (ORNL) for extrusion process to prepare the master bars/tubes to be tube-drawn, and Rhenium Alloys, Inc. (RAI), North Ridgeville, OH, for tube-drawing process. The masters bars have also been provided to Los Alamos National Laboratory (LANL) who works with Century Tubes, Inc., (CTI), San Diego, CA, as parallel tube production effort under the current program.

[Quality assurance and total quality management in residential home care].

PubMed

Nübling, R; Schrempp, C; Kress, G; Löschmann, C; Neubart, R; Kuhlmey, A

2004-02-01

Quality, quality assurance, and quality management have been important topics in residential care homes for several years. However, only as a result of reform processes in the German legislation (long-term care insurance, care quality assurance) is a systematic discussion taking place. Furthermore, initiatives and holistic model projects, which deal with the assessment and improvement of service quality, were developed in the field of care for the elderly. The present article gives a critical overview of essential developments. Different comprehensive approaches such as the implementation of quality management systems, nationwide expert-based initiatives, and developments towards professionalizing care are discussed. Empirically based approaches, especially those emphasizing the assessment of outcome quality, are focused on in this work. Overall, the authors conclude that in the past few years comprehensive efforts have been made to improve the quality of care. However, the current situation still requires much work to establish a nationwide launch and implementation of evidence-based quality assurance and quality management.

Relationship Between Time Consumption and Quality of Responses to Drug-related Queries: A Study From Seven Drug Information Centers in Scandinavia.

PubMed

Amundstuen Reppe, Linda; Lydersen, Stian; Schjøtt, Jan; Damkier, Per; Rolighed Christensen, Hanne; Peter Kampmann, Jens; Böttiger, Ylva; Spigset, Olav

2016-07-01

The aims of this study were to assess the quality of responses produced by drug information centers (DICs) in Scandinavia, and to study the association between time consumption processing queries and the quality of the responses. We posed six identical drug-related queries to seven DICs in Scandinavia, and the time consumption required for processing them was estimated. Clinical pharmacologists (internal experts) and general practitioners (external experts) reviewed responses individually. We used mixed model linear regression analyses to study the associations between time consumption on one hand and the summarized quality scores and the overall impression of the responses on the other hand. Both expert groups generally assessed the quality of the responses as "satisfactory" to "good." A few responses were criticized for being poorly synthesized and less relevant, of which none were quality-assured using co-signatures. For external experts, an increase in time consumption was statistically significantly associated with a decrease in common quality score (change in score, -0.20 per hour of work; 95% CI, -0.33 to -0.06; P = 0.004), and overall impression (change in score, -0.05 per hour of work; 95% CI, -0.08 to -0.01; P = 0.005). No such associations were found for the internal experts' assessment. To our knowledge, this is the first study of the association between time consumption and quality of responses to drug-related queries in DICs. The quality of responses were in general good, but time consumption and quality were only weakly associated in this setting. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

The perceived quality of interprofessional teamwork in an intensive care unit: A single centre intervention study.

PubMed

Van den Bulcke, Bo; Vyt, Andre; Vanheule, Stijn; Hoste, Eric; Decruyenaere, Johan; Benoit, Dominique

2016-05-01

This article describes a study that evaluated the quality of teamwork in a surgical intensive care unit and assessed whether teamwork could be improved significantly through a tailor-made intervention. The quality of teamwork prior to and after the intervention was assessed using the Interprofessional Practice and Education Quality Scales (IPEQS) using the PROSE online diagnostics and documenting system, which assesses three domains of teamwork: organisational factors, care processes, and team members' attitudes and beliefs. Furthermore, team members evaluated strengths and weaknesses of the teamwork through open-ended questions. Information gathered by means of the open questions was used to design a tailor-made 12-week intervention consisting of (1) optimising the existing weekly interdisciplinary meetings with collaborative decision-making and clear communication of goal-oriented actions, including the psychosocial aspects of care; and (2) organising and supporting the effective exchange of information over time between all professions involved. It was found that the intervention had a significant impact on organisational factors and care processes related to interprofessional teamwork for the total group and within all subgroups, despite baseline differences between the subgroups in interprofessional teamwork. In conclusion, teamwork, and more particularly the organisational aspects of interprofessional collaboration and processes of care, can be improved by a tailor-made intervention that takes into account the professional needs of healthcare workers.

Real-time assessment of critical quality attributes of a continuous granulation process.

PubMed

Fonteyne, Margot; Vercruysse, Jurgen; Díaz, Damián Córdoba; Gildemyn, Delphine; Vervaet, Chris; Remon, Jean Paul; De Beer, Thomas

2013-02-01

There exists the intention to shift pharmaceutical manufacturing of solid dosage forms from traditional batch production towards continuous production. The currently applied conventional quality control systems, based on sampling and time-consuming off-line analyses in analytical laboratories, would annul the advantages of continuous processing. It is clear that real-time quality assessment and control is indispensable for continuous production. This manuscript evaluates strengths and weaknesses of several complementary Process Analytical Technology (PAT) tools implemented in a continuous wet granulation process, which is part of a fully continuous from powder-to-tablet production line. The use of Raman and NIR-spectroscopy and a particle size distribution analyzer is evaluated for the real-time monitoring of critical parameters during the continuous wet agglomeration of an anhydrous theophylline- lactose blend. The solid state characteristics and particle size of the granules were analyzed in real-time and the critical process parameters influencing these granule characteristics were identified. The temperature of the granulator barrel, the amount of granulation liquid added and, to a lesser extent, the powder feed rate were the parameters influencing the solid state of the active pharmaceutical ingredient (API). A higher barrel temperature and a higher powder feed rate, resulted in larger granules.

A systematic review of Human Factors and Ergonomics (HFE)-based healthcare system redesign for quality of care and patient safety

PubMed Central

Xie, Anping; Carayon, Pascale

2014-01-01

Healthcare systems need to be redesigned to provide care that is safe, effective and efficient, and meets the multiple needs of patients. This systematic review examines how Human Factors and Ergonomics (HFE) is applied to redesign healthcare work systems and processes and improve quality and safety of care. We identified twelve projects representing 23 studies and addressing different physical, cognitive and organizational HFE issues in a variety of healthcare systems and care settings. Some evidence exists for the effectiveness of HFE-based healthcare system redesign in improving process and outcome measures of quality and safety of care. We assessed risk of bias in 16 studies reporting the impact of HFE-based healthcare system redesign and found varying quality across studies. Future research should further assess the impact of HFE on quality and safety of care, and clearly define the mechanisms by which HFE-based system redesign can improve quality and safety of care. Practitioner Summary Existing evidence shows that HFE-based healthcare system redesign has the potential to improve quality of care and patient safety. Healthcare organizations need to recognize the importance of HFE-based healthcare system redesign to quality of care and patient safety, and invest resources to integrate HFE in healthcare improvement activities. PMID:25323570

Assessing Impact Submissions for REF 2014: An Evaluation

ERIC Educational Resources Information Center

Manville, Catriona; Guthrie, Susan; Henham, Marie-Louise; Garrod, Bryn; Sousa, Sonia; Kirtley, Anne; Castle-Clarke, Sophie; Ling, Tom

2015-01-01

The Research Excellence Framework (REF) is a new system for assessing the quality of research in UK higher education institutions (HEIs). For the first time, part of the assessment included the wider impact of research. RAND Europe was commissioned to evaluate the assessment process of the impact element of REF submissions, and to explore the…

Assessing Assessment: In Pursuit of Meaningful Learning

ERIC Educational Resources Information Center

Rootman-le Grange, Ilse; Blackie, Margaret A. L.

2018-01-01

The challenge of supporting the development of meaningful learning is prevalent in chemistry education research. One of the core activities used in the learning process is assessments. The aim of this paper is to illustrate how the semantics dimension of Legitimation Code Theory can be a helpful tool to critique the quality of assessments and…

48 CFR 1401.7001-4 - Acquisition performance measurement systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

...-pronged approach that includes self assessment, statistical data for validation and flexible quality... regulations governing the acquisition process; and (3) Identify and implement changes necessary to improve the... through the review and oversight process. ...

48 CFR 1401.7001-4 - Acquisition performance measurement systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

...-pronged approach that includes self assessment, statistical data for validation and flexible quality... regulations governing the acquisition process; and (3) Identify and implement changes necessary to improve the... through the review and oversight process. ...

48 CFR 1401.7001-4 - Acquisition performance measurement systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

...-pronged approach that includes self assessment, statistical data for validation and flexible quality... regulations governing the acquisition process; and (3) Identify and implement changes necessary to improve the... through the review and oversight process. ...

48 CFR 1401.7001-4 - Acquisition performance measurement systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

...-pronged approach that includes self assessment, statistical data for validation and flexible quality... regulations governing the acquisition process; and (3) Identify and implement changes necessary to improve the... through the review and oversight process. ...

Prevention of falls, malnutrition and pressure ulcers among older persons - nursing staff's experiences of a structured preventive care process.

PubMed

Lannering, Christina; Ernsth Bravell, Marie; Johansson, Linda

2017-05-01

A structured and systematic care process for preventive work, aimed to reduce falls, pressure ulcers and malnutrition among older people, has been developed in Sweden. The process involves risk assessment, team-based interventions and evaluation of results. Since development, this structured work process has become web-based and has been implemented in a national quality registry called 'Senior Alert' and used countrywide. The aim of this study was to describe nursing staff's experience of preventive work by using the structured preventive care process as outlined by Senior Alert. Eight focus group interviews were conducted during 2015 including staff from nursing homes and home-based nursing care in three municipalities. The interview material was subjected to qualitative content analysis. In this study, both positive and negative opinions were expressed about the process. The systematic and structured work flow seemed to only partly facilitate care providers to improve care quality by making better clinical assessments, performing team-based planned interventions and learning from results. Participants described lack of reliability in the assessments and varying opinions about the structure. Furthermore, organisational structures limited the preventive work. © 2016 John Wiley & Sons Ltd.

Evaluating quality in endoscopy.

PubMed

Pohl, Heiko

2017-06-01

Despite an increasing number of publications and suggested quality measures, evaluating quality in endoscopy remains a challenge. Most quality measures are process measures and lack evidence for an association with clinically important outcomes. Furthermore, most measure focus on procedural aspects. Patients' expectations, cultural values, and work setting also affect quality, but are less often considered. The aim of this article is to broaden the view on quality assessment. Here, quality is viewed from four perspectives: an individual patient perspective, which considers expectations and personal values; a cultural perspective, which encompasses cultural values and norms; an individual care perspective, which includes how an individual patient is being treated; and a societal perspective, which sets the stage for provided care. The article concludes with a proposal to consider bundled composite measures as a path to a simple yet comprehensive approach to assessing and measuring quality in endoscopy. © Georg Thieme Verlag KG Stuttgart · New York.

Monitoring quality of care at dialysis facilities: a case for regulatory parsimony--and beyond.

PubMed

Stivelman, John C

2012-10-01

With the issuance of the new Conditions for Coverage in 2008 and the implementation of the Prospective Payment System in 2011, the Centers for Medicare & Medicaid Services has fundamentally altered the regulatory landscape of quality in the ESRD program. Although these changes-largely through use of tools comparing individual facility performance to regional and national quality expectations-have increased facility accountability for the quality of patient care in many quarters, they have also complicated both substance and process of facility adherence to quality rules in that component of the program. This editorial critically assesses the main quality tools now in use for dialysis facilities and reviews the issues arising from their conjoint use. A scheme for improving the effectiveness of each quality tool is proposed, and an assessment of their future value and effectiveness in quality improvement is offered.

Surface-water-quality assessment of the Kentucky River Basin, Kentucky; fixed-station network and selected water-quality data, April 1987 through August 1991

USGS Publications Warehouse

Griffin, M.S.; Martin, G.R.; White, K.D.

1994-01-01

This report describes selected data-collection activities and the associated data collected during the Kentucky River Basin pilot study of the U.S. Geological Survey's National Water-Quality Assessment Program. The data are intended to provide a nationally consistent description and improved understanding of current water quality in the basin. The data were collected at seven fixed stations that represent stream cross sections where constituent transport and water-quality trends can be evaluated. The report includes descriptions of (1) the basin; (2) the design of the fixed-station network; (3) the fixed-station sites; (4) the physical and chemical measurements; (5) the methods of sample collection, processing, and analysis; and (6) the quality-assurance and quality-control procedures. Water-quality data collected at the fixed stations during routine periodic sampling and supplemental high-flow sampling from April 1987 to August 1991 are presented.

Framework for the quality assurance of 'omics technologies considering GLP requirements.

PubMed

Kauffmann, Hans-Martin; Kamp, Hennicke; Fuchs, Regine; Chorley, Brian N; Deferme, Lize; Ebbels, Timothy; Hackermüller, Jörg; Perdichizzi, Stefania; Poole, Alan; Sauer, Ursula G; Tollefsen, Knut E; Tralau, Tewes; Yauk, Carole; van Ravenzwaay, Ben

2017-12-01

'Omics technologies are gaining importance to support regulatory toxicity studies. Prerequisites for performing 'omics studies considering GLP principles were discussed at the European Centre for Ecotoxicology and Toxicology of Chemicals (ECETOC) Workshop Applying 'omics technologies in Chemical Risk Assessment. A GLP environment comprises a standard operating procedure system, proper pre-planning and documentation, and inspections of independent quality assurance staff. To prevent uncontrolled data changes, the raw data obtained in the respective 'omics data recording systems have to be specifically defined. Further requirements include transparent and reproducible data processing steps, and safe data storage and archiving procedures. The software for data recording and processing should be validated, and data changes should be traceable or disabled. GLP-compliant quality assurance of 'omics technologies appears feasible for many GLP requirements. However, challenges include (i) defining, storing, and archiving the raw data; (ii) transparent descriptions of data processing steps; (iii) software validation; and (iv) ensuring complete reproducibility of final results with respect to raw data. Nevertheless, 'omics studies can be supported by quality measures (e.g., GLP principles) to ensure quality control, reproducibility and traceability of experiments. This enables regulators to use 'omics data in a fit-for-purpose context, which enhances their applicability for risk assessment. Copyright © 2017 Elsevier Inc. All rights reserved.

Bayesian Revision of Residual Detection Power

NASA Technical Reports Server (NTRS)

DeLoach, Richard

2013-01-01

This paper addresses some issues with quality assessment and quality assurance in response surface modeling experiments executed in wind tunnels. The role of data volume on quality assurance for response surface models is reviewed. Specific wind tunnel response surface modeling experiments are considered for which apparent discrepancies exist between fit quality expectations based on implemented quality assurance tactics, and the actual fit quality achieved in those experiments. These discrepancies are resolved by using Bayesian inference to account for certain imperfections in the assessment methodology. Estimates of the fraction of out-of-tolerance model predictions based on traditional frequentist methods are revised to account for uncertainty in the residual assessment process. The number of sites in the design space for which residuals are out of tolerance is seen to exceed the number of sites where the model actually fails to fit the data. A method is presented to estimate how much of the design space in inadequately modeled by low-order polynomial approximations to the true but unknown underlying response function.

Low-cost oblique illumination: an image quality assessment.

PubMed

Ruiz-Santaquiteria, Jesus; Espinosa-Aranda, Jose Luis; Deniz, Oscar; Sanchez, Carlos; Borrego-Ramos, Maria; Blanco, Saul; Cristobal, Gabriel; Bueno, Gloria

2018-01-01

We study the effectiveness of several low-cost oblique illumination filters to improve overall image quality, in comparison with standard bright field imaging. For this purpose, a dataset composed of 3360 diatom images belonging to 21 taxa was acquired. Subjective and objective image quality assessments were done. The subjective evaluation was performed by a group of diatom experts by psychophysical test where resolution, focus, and contrast were assessed. Moreover, some objective nonreference image quality metrics were applied to the same image dataset to complete the study, together with the calculation of several texture features to analyze the effect of these filters in terms of textural properties. Both image quality evaluation methods, subjective and objective, showed better results for images acquired using these illumination filters in comparison with the no filtered image. These promising results confirm that this kind of illumination filters can be a practical way to improve the image quality, thanks to the simple and low cost of the design and manufacturing process. (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).

Cancer patients' perceptions of quality-of-care attributes-Associations with age, perceived health status, gender and education.

PubMed

Suhonen, Riitta; Stolt, Minna; Berg, Agneta; Katajisto, Jouko; Lemonidou, Chryssoula; Patiraki, Elisabeth; Sjövall, Katarina; Charalambous, Andreas

2018-01-01

The aim of this study was to explore the associations between patients' gender, education, health status in relation to assessments of patient-centred quality and individuality in care and trust in nurses for those <65 (working age) and ≥65 years (older people). Patients' assessments of the quality of care they receive are essential for the development of the provision of patient care and services. Previous studies have revealed age of the patient is associated with their assessment of care quality attributes. The study employed a cross-sectional, multicultural comparative survey design. The data were collected using questionnaires among hospitalised cancer patients (N = 876, n = 599, 68%) in four European countries: Greece, Cyprus, Sweden and Finland. The data were divided into two subgroups based on age (cut point 65 years) and were analysed statistically. Cancer patients' age, gender and level of education were not related to their assessments of care quality attributes: person-centred care quality, individuality in care and trust in nurses. Subgroup analysis of the older adults and those of working age showed clear associations with patients' assessments of quality-of-care attributes and perceived health status. The lower the perceived health status, the lower the assessment of care quality attributes. The results suggest that the cancer itself is the strongest determinant of the care delivered, rather than any patient characteristics, such as age, education or gender. Perceived health status, in association with cancer patient assessments of care quality attributes, may be useful in the development of patient-centred, individualised care strategies alongside a stronger focus on people instead of cancer-care-related processes and duties. Health status was the only factor associated with cancer patients' assessments of care quality attributes. Cancer itself may be the strongest determinant of the care quality perceptions, rather than any patient characteristics. The findings of this study have implications for cancer care professionals in terms of patient assessment and care planning. The measures may be useful in assessing quality of cancer nursing care. © 2017 John Wiley & Sons Ltd.

Sigma metrics as a tool for evaluating the performance of internal quality control in a clinical chemistry laboratory

PubMed Central

Kumar, B. Vinodh; Mohan, Thuthi

2018-01-01

OBJECTIVE: Six Sigma is one of the most popular quality management system tools employed for process improvement. The Six Sigma methods are usually applied when the outcome of the process can be measured. This study was done to assess the performance of individual biochemical parameters on a Sigma Scale by calculating the sigma metrics for individual parameters and to follow the Westgard guidelines for appropriate Westgard rules and levels of internal quality control (IQC) that needs to be processed to improve target analyte performance based on the sigma metrics. MATERIALS AND METHODS: This is a retrospective study, and data required for the study were extracted between July 2015 and June 2016 from a Secondary Care Government Hospital, Chennai. The data obtained for the study are IQC - coefficient of variation percentage and External Quality Assurance Scheme (EQAS) - Bias% for 16 biochemical parameters. RESULTS: For the level 1 IQC, four analytes (alkaline phosphatase, magnesium, triglyceride, and high-density lipoprotein-cholesterol) showed an ideal performance of ≥6 sigma level, five analytes (urea, total bilirubin, albumin, cholesterol, and potassium) showed an average performance of <3 sigma level and for level 2 IQCs, same four analytes of level 1 showed a performance of ≥6 sigma level, and four analytes (urea, albumin, cholesterol, and potassium) showed an average performance of <3 sigma level. For all analytes <6 sigma level, the quality goal index (QGI) was <0.8 indicating the area requiring improvement to be imprecision except cholesterol whose QGI >1.2 indicated inaccuracy. CONCLUSION: This study shows that sigma metrics is a good quality tool to assess the analytical performance of a clinical chemistry laboratory. Thus, sigma metric analysis provides a benchmark for the laboratory to design a protocol for IQC, address poor assay performance, and assess the efficiency of existing laboratory processes. PMID:29692587

Evaluation of the quality of the teaching-learning process in undergraduate courses in Nursing.

PubMed

González-Chordá, Víctor Manuel; Maciá-Soler, María Loreto

2015-01-01

to identify aspects of improvement of the quality of the teaching-learning process through the analysis of tools that evaluated the acquisition of skills by undergraduate students of Nursing. prospective longitudinal study conducted in a population of 60 secondyear Nursing students based on registration data, from which quality indicators that evaluate the acquisition of skills were obtained, with descriptive and inferential analysis. nine items were identified and nine learning activities included in the assessment tools that did not reach the established quality indicators (p<0.05). There are statistically significant differences depending on the hospital and clinical practices unit (p<0.05). the analysis of the evaluation tools used in the article "Nursing Care in Welfare Processes" of the analyzed university undergraduate course enabled the detection of the areas for improvement in the teachinglearning process. The challenge of education in nursing is to reach the best clinical research and educational results, in order to provide improvements to the quality of education and health care.

[Audit and feedback, and continuous quality improvement strategies to improve the quality of care for type 2 diabetes: a systematic review of literature].

PubMed

Vecchi, Simona; Agabiti, Nera; Mitrova, Susanna; Cacciani, Laura; Amato, Laura; Davoli, Marina; Bargagli, Anna Maria

2016-01-01

we analysed evidence on effective interventions to improve the quality of care and management in patients with diabetes type 2. This review focuses particularly on audit and feedback intervention, targeted to healthcare providers, and continuous quality improvement (CQI) involving health professionals and health care systems, respectively. we searched The Cochrane Library, PubMed, and EMBASE (search period: January 2005-December 2015) to identify systematic reviews (SR) and randomized controlled trials (RCTs) considering patients' outcomes and process measures as quality indicators in diabetes care. Selection of studies and data extraction were carried out independently by two reviewers. Methodological quality of individual studies was assessed using the checklist «Assessment of methodological quality of systematic review» (AMSTAR) and the Cochrane's tool, respectively. We produced summaries of results for each study design. the search process resulted in 810 citations. One SR and 7 RCTs that compared any intervention in which audit and feedback and CQI was a component vs. other interventions were selected. The SR found that audit and feedback activity was associated with improvements of glycaemic (mean difference: 0.26; 95%CI 0.08;0.44) and cholesterol control (mean difference: 0.03; 95%CI -0.04;0.10). CQI interventions were not associated with an improvement of quality of diabetes care. The RCTs considered in this review compared a broad range of interventions including feedback as unique activity or as part of more complex strategies. The methodological quality was generally poor in all the included trials. the available evidence suggests that audit and feedback and CQI improve quality of care in diabetic patients, although the effect is small and heterogeneous among process and outcomes indicators.

The quality of care in occupational therapy: an assessment of selected Michigan hospitals.

PubMed

Kirchman, M M

1979-07-01

In this study, a methodology was developed and tested for assessing the quality of care in occupational therapy between educational and noneducational clinical settings, as measured by process and outcome. An instrument was constructed for an external audit of the hospital record. Standards drafted by the investigator were established as normative by a panel of experts for use in judging the programs. Hospital records of 84 patients with residual hemiparesis or hemiplegia in three noneducational settings and of 100 patients with similar diagnoses in two educational clinical settings from selected Michigan facilities were chosen by proportionate stratified random sampling. The process study showed that occupational therapy was of significantly higher quality in the educational settings. The outcome study did not show significant differences between types of settings. Implications for education and practice are discussed.

Examining the Relationship Between Nursing Informatics Competency and the Quality of Information Processing.

PubMed

Al-Hawamdih, Sajidah; Ahmad, Muayyad M

2018-03-01

The purpose of this study was to examine nursing informatics competency and the quality of information processing among nurses in Jordan. The study was conducted in a large hospital with 380 registered nurses. The hospital introduced the electronic health record in 2010. The measures used in this study were personal and job characteristics, self-efficacy, Self-Assessment Nursing Informatics Competencies, and Health Information System Monitoring Questionnaire. The convenience sample consisted of 99 nurses who used the electronic health record for at least 3 months. The analysis showed that nine predictors explained 22% of the variance in the quality of information processing, whereas the statistically significant predictors were nursing informatics competency, clinical specialty, and years of nursing experience. There is a need for policies that advocate for every nurse to be educated in nursing informatics and the quality of information processing.

Pesticide-sampling equipment, sample-collection and processing procedures, and water-quality data at Chicod Creek, North Carolina, 1992

USGS Publications Warehouse

Manning, T.K.; Smith, K.E.; Wood, C.D.; Williams, J.B.

1994-01-01

Water-quality samples were collected from Chicod Creek in the Coastal Plain Province of North Carolina during the summer of 1992 as part of the U.S. Geological Survey's National Water-Quality Assessment Program. Chicod Creek is in the Albemarle-Pamlico drainage area, one of four study units designated to test equipment and procedures for collecting and processing samples for the solid-phase extraction of selected pesticides, The equipment and procedures were used to isolate 47 pesticides, including organonitrogen, carbamate, organochlorine, organophosphate, and other compounds, targeted to be analyzed by gas chromatography/mass spectrometry. Sample-collection and processing equipment equipment cleaning and set-up procedures, methods pertaining to collecting, splitting, and solid-phase extraction of samples, and water-quality data resulting from the field test are presented in this report Most problems encountered during this intensive sampling exercise were operational difficulties relating to equipment used to process samples.

Direct infusion mass spectrometry metabolomics dataset: a benchmark for data processing and quality control

PubMed Central

Kirwan, Jennifer A; Weber, Ralf J M; Broadhurst, David I; Viant, Mark R

2014-01-01

Direct-infusion mass spectrometry (DIMS) metabolomics is an important approach for characterising molecular responses of organisms to disease, drugs and the environment. Increasingly large-scale metabolomics studies are being conducted, necessitating improvements in both bioanalytical and computational workflows to maintain data quality. This dataset represents a systematic evaluation of the reproducibility of a multi-batch DIMS metabolomics study of cardiac tissue extracts. It comprises of twenty biological samples (cow vs. sheep) that were analysed repeatedly, in 8 batches across 7 days, together with a concurrent set of quality control (QC) samples. Data are presented from each step of the workflow and are available in MetaboLights. The strength of the dataset is that intra- and inter-batch variation can be corrected using QC spectra and the quality of this correction assessed independently using the repeatedly-measured biological samples. Originally designed to test the efficacy of a batch-correction algorithm, it will enable others to evaluate novel data processing algorithms. Furthermore, this dataset serves as a benchmark for DIMS metabolomics, derived using best-practice workflows and rigorous quality assessment. PMID:25977770

Paediatric x-ray radiation dose reduction and image quality analysis.

PubMed

Martin, L; Ruddlesden, R; Makepeace, C; Robinson, L; Mistry, T; Starritt, H

2013-09-01

Collaboration of multiple staff groups has resulted in significant reduction in the risk of radiation-induced cancer from radiographic x-ray exposure during childhood. In this study at an acute NHS hospital trust, a preliminary audit identified initial exposure factors. These were compared with European and UK guidance, leading to the introduction of new factors that were in compliance with European guidance on x-ray tube potentials. Image quality was assessed using standard anatomical criteria scoring, and visual grading characteristics analysis assessed the impact on image quality of changes in exposure factors. This analysis determined the acceptability of gradual radiation dose reduction below the European and UK guidance levels. Chest and pelvis exposures were optimised, achieving dose reduction for each age group, with 7%-55% decrease in critical organ dose. Clinicians confirmed diagnostic image quality throughout the iterative process. Analysis of images acquired with preliminary and final exposure factors indicated an average visual grading analysis result of 0.5, demonstrating equivalent image quality. The optimisation process and final radiation doses are reported for Carestream computed radiography to aid other hospitals in minimising radiation risks to children.

Review of indicators for cross-sectoral optimization of nosocomial infection prophylaxis – a perspective from structurally- and process-oriented hygiene

PubMed Central

Hübner, Nils-Olaf; Fleßa, Steffen; Jakisch, Ralf; Assadian, Ojan; Kramer, Axel

2012-01-01

In the care of patients, the prevention of nosocomial infections is crucial. For it to be successful, cross-sectoral, interface-oriented hygiene quality management is necessary. The goal is to apply the HACCP (Hazard Assessment and Critical Control Points) concept to hospital hygiene, in order to create a multi-dimensional hygiene control system based on hygiene indicators that will overcome the limitations of a procedurally non-integrated and non-cross-sectoral view of hygiene. Three critical risk dimensions can be identified for the implementation of three-dimensional quality control of hygiene in clinical routine: the constitution of the person concerned, the surrounding physical structures and technical equipment, and the medical procedures. In these dimensions, the establishment of indicators and threshold values enables a comprehensive assessment of hygiene quality. Thus, the cross-sectoral evaluation of the quality of structure, processes and results is decisive for the success of integrated infection prophylaxis. This study lays the foundation for hygiene indicator requirements and develops initial concepts for evaluating quality management in hygiene. PMID:22558049

Guidelines for the processing and quality assurance of benthic invertebrate samples collected as part of the National Water-Quality Assessment Program

USGS Publications Warehouse

Cuffney, T.F.; Gurtz, M.E.; Meador, M.R.

1993-01-01

Benthic invertebrate samples are collected as part of the U.S. Geological Survey's National Water-Quality Assessment Program. This is a perennial, multidisciplinary program that integrates biological, physical, and chemical indicators of water quality to evaluate status and trends and to develop an understanding of the factors controlling observed water quality. The Program examines water quality in 60 study units (coupled ground- and surface-water systems) that encompass most of the conterminous United States and parts of Alaska and Hawaii. Study-unit teams collect and process qualitative and semi-quantitative invertebrate samples according to standardized procedures. These samples are processed (elutriated and subsampled) in the field to produce as many as four sample components: large-rare, main-body, elutriate, and split. Each sample component is preserved in 10-percent formalin, and two components, large-rare and main-body, are sent to contract laboratories for further processing. The large-rare component is composed of large invertebrates that are removed from the sample matrix during field processing and placed in one or more containers. The main-body sample component consists of the remaining sample materials (sediment, detritus, and invertebrates) and is subsampled in the field to achieve a volume of 750 milliliters or less. The remaining two sample components, elutriate and split, are used for quality-assurance and quality-control purposes. Contract laboratories are used to identify and quantify invertebrates from the large-rare and main-body sample components according to the procedures and guidelines specified within this document. These guidelines allow the use of subsampling techniques to reduce the volume of sample material processed and to facilitate identifications. These processing procedures and techniques may be modified if the modifications provide equal or greater levels of accuracy and precision. The intent of sample processing is to determine the quantity of each taxon present in the semi-quantitative samples or to list the taxa present in qualitative samples. The processing guidelines provide standardized laboratory forms, sample labels, detailed sample processing flow charts, standardized format for electronic data, quality-assurance procedures and checks, sample tracking standards, and target levels for taxonomic determinations. The contract laboratory (1) is responsible for identifications and quantifications, (2) constructs reference collections, (3) provides data in hard copy and electronic forms, (4) follows specified quality-assurance and quality-control procedures, and (5) returns all processed and unprocessed portions of the samples. The U.S. Geological Survey's Quality Management Group maintains a Biological Quality-Assurance Unit, located at the National Water-Quality Laboratory, Arvada, Colorado, to oversee the use of contract laboratories and ensure the quality of data obtained from these laboratories according to the guidelines established in this document. This unit establishes contract specifications, reviews contractor performance (timeliness, accuracy, and consistency), enters data into the National Water Information System-II data base, maintains in-house reference collections, deposits voucher specimens in outside museums, and interacts with taxonomic experts within and outside the U.S. Geological Survey. This unit also modifies the existing sample processing and quality-assurance guidelines, establishes criteria and testing procedures for qualifying potential contract laboratories, identifies qualified taxonomic experts, and establishes voucher collections.

The impact of a quality-improvement package on reproductive health services delivered by private providers in Uganda.

PubMed

Agha, Sohail

2010-09-01

This study assesses the effectiveness of a quality-improvement (QI) package designed to enable small-scale commercial reproductive health (RH) service providers to improve the services they offer. The study was conducted among midwives who are members of the Uganda Private Midwives Association. A pretest-post-test quasi-experimental panel study design was used wherein midwife clinics were allocated to two experimental groups and one control group. Baseline and follow-up measurements of structural and process attributes of quality were taken at the clinics by means of a facility inventory, interviews with midwives, and observations of client-provider interactions. Nearly 70 percent of the midwives who were trained to use the package reported that it was easy to use. Among clinics in which midwives received training in the use of the self-assessment tool and in developing action plans, structural and process attributes of quality improved only among those clinics in which the midwives' supervisors received training in finding solutions to the problems identified through self-assessments. The QI package may be implemented with small-scale private providers of RH services who are part of a professional association, network, or franchise that supervises their performance.

Does a quality management system improve quality in primary care practices in Switzerland? A longitudinal study.

PubMed

Goetz, Katja; Hess, Sigrid; Jossen, Marianne; Huber, Felix; Rosemann, Thomas; Brodowski, Marc; Künzi, Beat; Szecsenyi, Joachim

2015-04-21

To examine the effectiveness of the quality management programme--European Practice Assessment--in primary care in Switzerland. Longitudinal study with three points of measurement. Primary care practices in Switzerland. In total, 45 of 91 primary care practices completed European Practice Assessment three times. The interval between each assessment was around 36 months. A variance analyses for repeated measurements were performed for all 129 quality indicators from the domains: 'infrastructure', 'information', 'finance', and 'quality and safety' to examine changes over time. Significant improvements were found in three of four domains: 'quality and safety' (F=22.81, p<0.01), 'information' (F=27.901, p<0.01) and 'finance' (F=4.073, p<0.02). The 129 quality indicators showed a significant improvement within the three points of measurement (F=33.864, p<0.01). The European Practice Assessment for primary care practices thus provides a functioning quality management programme, focusing on the sustainable improvement of structural and organisational aspects to promote high quality of primary care. The implementation of a quality management system which also includes a continuous improvement process would give added value to provide good care. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Guidelines for preparation of the 1996 state water quality assessments (305(b) reports)

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-05-01

The Federal Water Polluton Control Act (PL92-500, commonly known as the Clean Water Act), establishes a process for States to use to develop information on the quality of the Nation`s water resources and to report this information to the U.S. Environmental Protection Agency (EPA), the U.S. Congress, and the citizens of this country. Each State must develop a program to monitor the quality of its surface and ground waters and prepare a report every 2 years describing the status of its water quality. EPA compiles the data from the State reports, summarizes them, and transmits the summaries to Congress alongmore » with an analysis of the status of water quality nationwide. This process, referred to as the 305(b) process, is an essential aspect of the Nation`s water pollution control effort.« less

Quality of Care for Work-associated Carpal Tunnel Syndrome

PubMed Central

Nuckols, Teryl; Conlon, Craig; Robbins, Michael; Dworsky, Michael; Lai, Julie; Roth, Carol P.; Levitan, Barbara; Seabury, Seth; Seelam, Rachana; Asch, Steven M.

2017-01-01

Objective To evaluate the quality of care provided to individuals with workers’ compensation claims related to CTS and identify patient characteristics associated with receiving better care. Methods We recruited subjects with new claims for CTS from 30 occupational clinics affiliated with Kaiser Permanente Northern California. We applied 45 process-oriented quality measures to 477 subjects’ medical records, and performed multivariate logistic regression to identify patient characteristics associated with quality. Results Overall, 81.6% of care adhered to recommended standards. Certain tasks related to assessing and managing activity were underused. Patients with classic/probable Katz diagrams, positive electrodiagnostic tests, and higher incomes received better care. However, age, gender, and race/ethnicity were not associated with quality. Conclusions Care processes for work-associated CTS frequently adhered to quality measures. Clinical factors were more strongly associated with quality than demographic and socioeconomic ones. PMID:28045797

Lean interventions in healthcare: do they actually work? A systematic literature review.

PubMed

Moraros, John; Lemstra, Mark; Nwankwo, Chijioke

2016-04-01

Lean is a widely used quality improvement methodology initially developed and used in the automotive and manufacturing industries but recently expanded to the healthcare sector. This systematic literature review seeks to independently assess the effect of Lean or Lean interventions on worker and patient satisfaction, health and process outcomes, and financial costs. We conducted a systematic literature review of Medline, PubMed, Cochrane Library, CINAHL, Web of Science, ABI/Inform, ERIC, EMBASE and SCOPUS. Peer reviewed articles were included if they examined a Lean intervention and included quantitative data. Methodological quality was assessed using validated critical appraisal checklists. Publically available data collected by the Saskatchewan Health Quality Council and the Saskatchewan Union of Nurses were also analysed and reported separately. Data on design, methods, interventions and key outcomes were extracted and collated. Our electronic search identified 22 articles that passed methodological quality review. Among the accepted studies, 4 were exclusively concerned with health outcomes, 3 included both health and process outcomes and 15 included process outcomes. Our study found that Lean interventions have: (i) no statistically significant association with patient satisfaction and health outcomes; (ii) a negative association with financial costs and worker satisfaction and (iii) potential, yet inconsistent, benefits on process outcomes like patient flow and safety. While some may strongly believe that Lean interventions lead to quality improvements in healthcare, the evidence to date simply does not support this claim. More rigorous, higher quality and better conducted scientific research is required to definitively ascertain the impact and effectiveness of Lean in healthcare settings. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care.

A novel processed food classification system applied to Australian food composition databases.

PubMed

O'Halloran, S A; Lacy, K E; Grimes, C A; Woods, J; Campbell, K J; Nowson, C A

2017-08-01

The extent of food processing can affect the nutritional quality of foodstuffs. Categorising foods by the level of processing emphasises the differences in nutritional quality between foods within the same food group and is likely useful for determining dietary processed food consumption. The present study aimed to categorise foods within Australian food composition databases according to the level of food processing using a processed food classification system, as well as assess the variation in the levels of processing within food groups. A processed foods classification system was applied to food and beverage items contained within Australian Food and Nutrient (AUSNUT) 2007 (n = 3874) and AUSNUT 2011-13 (n = 5740). The proportion of Minimally Processed (MP), Processed Culinary Ingredients (PCI) Processed (P) and Ultra Processed (ULP) by AUSNUT food group and the overall proportion of the four processed food categories across AUSNUT 2007 and AUSNUT 2011-13 were calculated. Across the food composition databases, the overall proportions of foods classified as MP, PCI, P and ULP were 27%, 3%, 26% and 44% for AUSNUT 2007 and 38%, 2%, 24% and 36% for AUSNUT 2011-13. Although there was wide variation in the classifications of food processing within the food groups, approximately one-third of foodstuffs were classified as ULP food items across both the 2007 and 2011-13 AUSNUT databases. This Australian processed food classification system will allow researchers to easily quantify the contribution of processed foods within the Australian food supply to assist in assessing the nutritional quality of the dietary intake of population groups. © 2017 The British Dietetic Association Ltd.

Selecting a sterilisation subcontractor.

PubMed

Donawa, M

2001-03-01

Medical device manufacturers who need contract sterilisation services sometimes lack extensive knowledge of the technical aspects of sterilisation processes. For this reason, they may have problems assessing quality requirements for subcontractor sterilisation services. This article discusses important quality issues that should be considered when selecting a sterilisation subcontractor.

Applying a Continuous Quality Improvement Model To Assess Institutional Effectiveness.

ERIC Educational Resources Information Center

Roberts, Keith

This handbook outlines techniques and processes for improving institutional effectiveness and ensuring continuous quality improvement, based on strategic planning activities at Wisconsin's Milwaukee Area Technical College (MATC). First, institutional effectiveness is defined and 17 core indicators of effectiveness developed by the Wisconsin…

A Flexible Modeling Framework For Hydraulic and Water Quality Performance Assessment of Stormwater Green Infrastructure

EPA Science Inventory

A flexible framework has been created for modeling multi-dimensional hydrological and water quality processes within stormwater green infrastructures (GIs). The framework models a GI system using a set of blocks (spatial features) and connectors (interfaces) representing differen...

Wedge cutting of mild steel by CO 2 laser and cut-quality assessment in relation to normal cutting

NASA Astrophysics Data System (ADS)

Yilbas, B. S.; Karatas, C.; Uslan, I.; Keles, O.; Usta, Y.; Yilbas, Z.; Ahsan, M.

2008-10-01

In some applications, laser cutting of wedge surfaces cannot be avoided in sheet metal processing and the quality of the end product defines the applicability of the laser-cutting process in such situations. In the present study, CO 2 laser cutting of the wedge surfaces as well as normal surfaces (normal to laser beam axis) is considered and the end product quality is assessed using the international standards for thermal cutting. The cut surfaces are examined by the optical microscopy and geometric features of the cut edges such as out of flatness and dross height are measured from the micrographs. A neural network is introduced to classify the striation patterns of the cut surfaces. It is found that the dross height and out of flatness are influenced significantly by the laser output power, particularly for wedge-cutting situation. Moreover, the cut quality improves at certain value of the laser power intensity.

Sensoring Fusion Data from the Optic and Acoustic Emissions of Electric Arcs in the GMAW-S Process for Welding Quality Assessment

PubMed Central

Alfaro, Sadek Crisóstomo Absi; Cayo, Eber Huanca

2012-01-01

The present study shows the relationship between welding quality and optical-acoustic emissions from electric arcs, during welding runs, in the GMAW-S process. Bead on plate welding tests was carried out with pre-set parameters chosen from manufacturing standards. During the welding runs interferences were induced on the welding path using paint, grease or gas faults. In each welding run arc voltage, welding current, infrared and acoustic emission values were acquired and parameters such as arc power, acoustic peaks rate and infrared radiation rate computed. Data fusion algorithms were developed by assessing known welding quality parameters from arc emissions. These algorithms have showed better responses when they are based on more than just one sensor. Finally, it was concluded that there is a close relation between arc emissions and quality in welding and it can be measured from arc emissions sensing and data fusion algorithms. PMID:22969330

Cultural adaptation of a pediatric functional assessment for rehabilitation outcomes research.

PubMed

Arestad, Kristen E; MacPhee, David; Lim, Chun Y; Khetani, Mary A

2017-09-15

Significant racial and ethnic health care disparities experienced by Hispanic children with special health care needs (CSHCN) create barriers to enacting culturally competent rehabilitation services. One way to minimize the impact of disparities in rehabilitation is to equip practitioners with culturally relevant functional assessments to accurately determine service needs. Current approaches to culturally adapting assessments have three major limitations: use of inconsistent translation processes; current processes assess for some, but not all, elements of cultural equivalence; and limited evidence to guide decision making about whether to undertake cultural adaptation with and without language translation. The aims of this observational study are (a) to examine similarities and differences of culturally adapting a pediatric functional assessment with and without language translation, and (b) to examine the feasibility of cultural adaptation processes. The Young Children's Participation and Environment Measure (YC-PEM), a pediatric functional assessment, underwent cultural adaptation (i.e., language translation and cognitive testing) to establish Spanish and English pilot versions for use by caregivers of young CSHCN of Mexican descent. Following language translation to develop a Spanish YC-PEM pilot version, 7 caregivers (4 Spanish-speaking; 3 English-speaking) completed cognitive testing to inform decisions regarding content revisions to English and Spanish YC-PEM versions. Participant responses were content coded to established cultural equivalencies. Coded data were summed to draw comparisons on the number of revisions needed to achieve cultural equivalence between the two versions. Feasibility was assessed according to process data and data quality. Results suggest more revisions are required to achieve cultural equivalence for the translated (Spanish) version of the YC-PEM. However, issues around how the participation outcome is conceptualized were identified in both versions. Feasibility results indicate that language translation processes require high resource investment, but may increase translation quality. However, use of questionnaires versus interview methods for cognitive testing may have limited data saturation. Results lend preliminary support to the need for and feasibility of cultural adaptation with and without language translation. Results inform decisions surrounding cultural adaptations with and without language translation and thereby enhance cultural competence and quality assessment of healthcare need within pediatric rehabilitation.

Patient safety competencies in undergraduate nursing students: a rapid evidence assessment.

PubMed

Bianchi, Monica; Bressan, Valentina; Cadorin, Lucia; Pagnucci, Nicola; Tolotti, Angela; Valcarenghi, Dario; Watson, Roger; Bagnasco, Annamaria; Sasso, Loredana

2016-12-01

To identify patient safety competencies, and determine the clinical learning environments that facilitate the development of patient safety competencies in nursing students. Patient safety in nursing education is of key importance for health professional environments, settings and care systems. To be effective, safe nursing practice requires a good integration between increasing knowledge and the different clinical practice settings. Nurse educators have the responsibility to develop effective learning processes and ensure patient safety. Rapid Evidence Assessment. MEDLINE, CINAHL, SCOPUS and ERIC were searched, yielding 500 citations published between 1 January 2004-30 September 2014. Following the Rapid Evidence Assessment process, 17 studies were included in this review. Hawker's (2002) quality assessment tool was used to assess the quality of the selected studies. Undergraduate nursing students need to develop competencies to ensure patient safety. The quality of the pedagogical atmosphere in the clinical setting has an important impact on the students' overall level of competence. Active student engagement in clinical processes stimulates their critical reasoning, improves interpersonal communication and facilitates adequate supervision and feedback. Few studies describe the nursing students' patient safety competencies and exactly what they need to learn. In addition, studies describe only briefly which clinical learning environments facilitate the development of patient safety competencies in nursing students. Further research is needed to identify additional pedagogical strategies and the specific characteristics of the clinical learning environments that encourage the development of nursing students' patient safety competencies. © 2016 John Wiley & Sons Ltd.

Improving the Quality of Maternal and Neonatal Care: the Role of Standard Based Participatory Assessments

PubMed Central

Tamburlini, Giorgio; Yadgarova, Klara; Kamilov, Asamidin; Bacci, Alberta

2013-01-01

Background Gaps in quality of care are seriously affecting maternal and neonatal health globally but reports of successful quality improvement cycles implemented at large scale are scanty. We report the results of a nation-wide program to improve quality of maternal and neonatal hospital care in a lower-middle income country focusing on the role played by standard-based participatory assessments. Methods Improvements in the quality of maternal and neonatal care following an action-oriented participatory assessment of 19 areas covering the whole continuum from admission to discharge were measured after an average period of 10 months in four busy referral maternity hospitals in Uzbekistan. Information was collected by a multidisciplinary national team with international supervision through visit to hospital services, examination of medical records, direct observation of cases and interviews with staff and mothers. Scores (range 0 to 3) attributed to over 400 items and combined in average scores for each area were compared with the baseline assessment. Results Between the first and the second assessment, all four hospitals improved their overall score by an average 0.7 points out of 3 (range 0.4 to 1), i.e. by 22%. The improvements occurred in all main areas of care and were greater in the care of normal labor and delivery (+0.9), monitoring, infection control and mother and baby friendly care (+0.8) the role of the participatory action-oriented approach in determining the observed changes was estimated crucial in 6 out of 19 areas and contributory in other 8. Ongoing implementation of referral system and new classification of neonatal deaths impede the improved process of care to be reflected in current statistics. Conclusions Important improvements in the quality of hospital care provided to mothers and newborn babies can be achieved through a standard-based action-oriented and participatory assessment and reassessment process. PMID:24167616

A Scoping Review of Empirical Research Relating to Quality and Effectiveness of Research Ethics Review.

PubMed

Nicholls, Stuart G; Hayes, Tavis P; Brehaut, Jamie C; McDonald, Michael; Weijer, Charles; Saginur, Raphael; Fergusson, Dean

2015-01-01

To date there is no established consensus of assessment criteria for evaluating research ethics review. We conducted a scoping review of empirical research assessing ethics review processes in order to identify common elements assessed, research foci, and research gaps to aid in the development of assessment criteria. Electronic searches of Ovid Medline, PsychInfo, and the Cochrane DSR, ACP Journal Club, DARE, CCTR, CMR, HTA, and NHSEED, were conducted. After de-duplication, 4234 titles and abstracts were reviewed. Altogether 4036 articles were excluded following screening of titles, abstracts and full text. A total of 198 articles included for final data extraction. Few studies originated from outside North America and Europe. No study reported using an underlying theory or framework of quality/effectiveness to guide study design or analyses. We did not identify any studies that had involved a controlled trial--randomised or otherwise--of ethics review procedures or processes. Studies varied substantially with respect to outcomes assessed, although tended to focus on structure and timeliness of ethics review. Our findings indicate a lack of consensus on appropriate assessment criteria, exemplified by the varied study outcomes identified, but also a fragmented body of research. To date research has been largely quantitative, with little attention given to stakeholder experiences, and is largely cross sectional. A lack of longitudinal research to date precludes analyses of change or assessment of quality improvement in ethics review.

How do we know? An assessment of integrated community case management data quality in four districts of Malawi.

PubMed

Yourkavitch, Jennifer; Zalisk, Kirsten; Prosnitz, Debra; Luhanga, Misheck; Nsona, Humphreys

2016-11-01

The World Health Organization contracted annual data quality assessments of Rapid Access Expansion (RAcE) projects to review integrated community case management (iCCM) data quality and the monitoring and evaluation (M&E) system for iCCM, and to suggest ways to improve data quality. The first RAcE data quality assessment was conducted in Malawi in January 2014 and we present findings pertaining to data from the health management information system at the community, facility and other sub-national levels because RAcE grantees rely on that for most of their monitoring data. We randomly selected 10 health facilities (10% of eligible facilities) from the four RAcE project districts, and collected quantitative data with an adapted and comprehensive tool that included an assessment of Malawi's M&E system for iCCM data and a data verification exercise that traced selected indicators through the reporting system. We rated the iCCM M&E system across five function areas based on interviews and observations, and calculated verification ratios for each data reporting level. We also conducted key informant interviews with Health Surveillance Assistants and facility, district and central Ministry of Health staff. Scores show a high-functioning M&E system for iCCM with some deficiencies in data management processes. The system lacks quality controls, including data entry verification, a protocol for addressing errors, and written procedures for data collection, entry, analysis and management. Data availability was generally high except for supervision data. The data verification process identified gaps in completeness and consistency, particularly in Health Surveillance Assistants' record keeping. Staff at all levels would like more training in data management. This data quality assessment illuminates where an otherwise strong M&E system for iCCM fails to ensure some aspects of data quality. Prioritizing data management with documented protocols, additional training and approaches to create efficient supervision practices may improve iCCM data quality. © The Author 2016. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

MAPPING INDUCED POLARIZATION WITH NATURAL ELECTROMAGNETIC FIELDS FOR EXPLORATION AND RESOURCES CHARACTERIZATION BY THE MINING INDUSTRY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edward Nichols

2002-05-03

In this quarter we continued the processing of the Safford IP survey data. The processing identified a time shift problem between the sites that was caused by a GPS firmware error. A software procedure was developed to identify and correct the shift, and this was applied to the data. Preliminary estimates were made of the remote referenced MT parameters, and initial data quality assessment showed the data quality was good for most of the line. The multi-site robust processing code of Egbert was linked to the new data and processing initiated.

Safety Auditing and Assessments

NASA Technical Reports Server (NTRS)

Goodin, James Ronald (Ronnie)

2005-01-01

Safety professionals typically do not engage in audits and independent assessments with the vigor as do our quality brethren. Taking advantage of industry and government experience conducting value added Independent Assessments or Audits benefits a safety program. Most other organizations simply call this process "internal audits." Sources of audit training are presented and compared. A relation of logic between audit techniques and mishap investigation is discussed. An example of an audit process is offered. Shortcomings and pitfalls of auditing are covered.

Safety Auditing and Assessments

NASA Astrophysics Data System (ADS)

Goodin, Ronnie

2005-12-01

Safety professionals typically do not engage in audits and independent assessments with the vigor as do our quality brethren. Taking advantage of industry and government experience conducting value added Independent Assessments or Audits benefits a safety program. Most other organizations simply call this process "internal audits." Sources of audit training are presented and compared. A relation of logic between audit techniques and mishap investigation is discussed. An example of an audit process is offered. Shortcomings and pitfalls of auditing are covered.

Modelling and analysis of ozone concentration by artificial intelligent techniques for estimating air quality

NASA Astrophysics Data System (ADS)

Taylan, Osman

2017-02-01

High ozone concentration is an important cause of air pollution mainly due to its role in the greenhouse gas emission. Ozone is produced by photochemical processes which contain nitrogen oxides and volatile organic compounds in the lower atmospheric level. Therefore, monitoring and controlling the quality of air in the urban environment is very important due to the public health care. However, air quality prediction is a highly complex and non-linear process; usually several attributes have to be considered. Artificial intelligent (AI) techniques can be employed to monitor and evaluate the ozone concentration level. The aim of this study is to develop an Adaptive Neuro-Fuzzy inference approach (ANFIS) to determine the influence of peripheral factors on air quality and pollution which is an arising problem due to ozone level in Jeddah city. The concentration of ozone level was considered as a factor to predict the Air Quality (AQ) under the atmospheric conditions. Using Air Quality Standards of Saudi Arabia, ozone concentration level was modelled by employing certain factors such as; nitrogen oxide (NOx), atmospheric pressure, temperature, and relative humidity. Hence, an ANFIS model was developed to observe the ozone concentration level and the model performance was assessed by testing data obtained from the monitoring stations established by the General Authority of Meteorology and Environment Protection of Kingdom of Saudi Arabia. The outcomes of ANFIS model were re-assessed by fuzzy quality charts using quality specification and control limits based on US-EPA air quality standards. The results of present study show that the ANFIS model is a comprehensive approach for the estimation and assessment of ozone level and is a reliable approach to produce more genuine outcomes.

45 CFR 2522.415 - How does the grant selection process work?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 4 2014-10-01 2014-10-01 false How does the grant selection process work? 2522... Programs § 2522.415 How does the grant selection process work? The selection process includes: (a... eligibility requirements; (b) Applying the basic selection criteria to assess the quality of your proposal; (c...

Quality assessment of raw and processed Arctium lappa L. through multicomponent quantification, chromatographic fingerprint, and related chemometric analysis.

PubMed

Qin, Kunming; Wang, Bin; Li, Weidong; Cai, Hao; Chen, Danni; Liu, Xiao; Yin, Fangzhou; Cai, Baochang

2015-05-01

In traditional Chinese medicine, raw and processed herbs are used to treat different diseases. Suitable quality assessment methods are crucial for the discrimination between raw and processed herbs. The dried fruit of Arctium lappa L. and their processed products are widely used in traditional Chinese medicine, yet their therapeutic effects are different. In this study, a novel strategy using high-performance liquid chromatography and diode array detection coupled with multivariate statistical analysis to rapidly explore raw and processed Arctium lappa L. was proposed and validated. Four main components in a total of 30 batches of raw and processed Fructus Arctii samples were analyzed, and ten characteristic peaks were identified in the fingerprint common pattern. Furthermore, similarity evaluation, principal component analysis, and hierachical cluster analysis were applied to demonstrate the distinction. The results suggested that the relative amounts of the chemical components of raw and processed Fructus Arctii samples are different. This new method has been successfully applied to detect the raw and processed Fructus Arctii in marketed herbal medicinal products. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Environmental Assessment And Finding of No Significant Impact for the Low Impact Development Retrofit At Pillar Point Air Force Station, California

DTIC Science & Technology

2012-01-09

utilize LID techniques to enable greater on-site infiltration of storm water to improve storm water quality and restore natural water quality conditions...systems and conveyed through above- and below-ground piping to concrete roadside ditches. Stonn Water Quality Storm water quality monitoring has been...process of being awarded and implemented. The results of all referenced storm water quality and septic inspection reports is available upon request to

INDOOR AIR ASSESSMENT - A REVIEW OF INDOOR AIR QUALITY RISK CHARACTERIZATION

EPA Science Inventory

Risk assessment methodologies provide a mechanism for incorporating scientific evidence and Judgments Into the risk management decision process. isk characterization framework has been developed to provide a systematic approach for analysis and presentation of risk characterizati...

The aerospace plane design challenge: Credible computational fluid dynamics results

NASA Technical Reports Server (NTRS)

Mehta, Unmeel B.

1990-01-01

Computational fluid dynamics (CFD) is necessary in the design processes of all current aerospace plane programs. Single-stage-to-orbit (STTO) aerospace planes with air-breathing supersonic combustion are going to be largely designed by means of CFD. The challenge of the aerospace plane design is to provide credible CFD results to work from, to assess the risk associated with the use of those results, and to certify CFD codes that produce credible results. To establish the credibility of CFD results used in design, the following topics are discussed: CFD validation vis-a-vis measurable fluid dynamics (MFD) validation; responsibility for credibility; credibility requirement; and a guide for establishing credibility. Quantification of CFD uncertainties helps to assess success risk and safety risks, and the development of CFD as a design tool requires code certification. This challenge is managed by designing the designers to use CFD effectively, by ensuring quality control, and by balancing the design process. For designing the designers, the following topics are discussed: how CFD design technology is developed; the reasons Japanese companies, by and large, produce goods of higher quality than the U.S. counterparts; teamwork as a new way of doing business; and how ideas, quality, and teaming can be brought together. Quality control for reducing the loss imparted to the society begins with the quality of the CFD results used in the design process, and balancing the design process means using a judicious balance of CFD and MFD.

Data quality objectives for the initial fuel conditioning examinations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawrence, L.A.

The Data Quality Objectives (DQOs) were established for the response of the first group of fuel samples shipped from the K West Basin to the Hanford 327 Building hot cells for examinations to the proposed Path Forward conditioning process. Controlled temperature and atmosphere furnace testing testing will establish performance parameters using the conditioning process (drying, sludge drying, hydride decomposition passivation) proposed by the Independent Technical Assessment (ITA) Team as the baseline.

Quality assurance, an administrative means to a managerial end: Part IV.

PubMed

Clark, G B

1992-01-01

This is the fourth and final part of a series of articles on laboratory quality surveillance. Part I addressed the historical background of medical quality assurance. Part II covered surveillance guidelines of the Joint Commission on Accreditation of Healthcare Organizations (JCAHO) and the College of American Pathologists with emphasis on quality assurance (QA) and the ten-step process. Part III focused on the JCAHO transition from QA to quality assessment and improvement. Part IV concludes the series by discussing the systematic identification of quality indicators in the total quality management and continuous quality improvement environment.

Evaluating the effectiveness of a practical inquiry-based learning bioinformatics module on undergraduate student engagement and applied skills.

PubMed

Brown, James A L

2016-05-06

A pedagogic intervention, in the form of an inquiry-based peer-assisted learning project (as a practical student-led bioinformatics module), was assessed for its ability to increase students' engagement, practical bioinformatic skills and process-specific knowledge. Elements assessed were process-specific knowledge following module completion, qualitative student-based module evaluation and the novelty, scientific validity and quality of written student reports. Bioinformatics is often the starting point for laboratory-based research projects, therefore high importance was placed on allowing students to individually develop and apply processes and methods of scientific research. Students led a bioinformatic inquiry-based project (within a framework of inquiry), discovering, justifying and exploring individually discovered research targets. Detailed assessable reports were produced, displaying data generated and the resources used. Mimicking research settings, undergraduates were divided into small collaborative groups, with distinctive central themes. The module was evaluated by assessing the quality and originality of the students' targets through reports, reflecting students' use and understanding of concepts and tools required to generate their data. Furthermore, evaluation of the bioinformatic module was assessed semi-quantitatively using pre- and post-module quizzes (a non-assessable activity, not contributing to their grade), which incorporated process- and content-specific questions (indicative of their use of the online tools). Qualitative assessment of the teaching intervention was performed using post-module surveys, exploring student satisfaction and other module specific elements. Overall, a positive experience was found, as was a post module increase in correct process-specific answers. In conclusion, an inquiry-based peer-assisted learning module increased students' engagement, practical bioinformatic skills and process-specific knowledge. © 2016 by The International Union of Biochemistry and Molecular Biology, 44:304-313 2016. © 2016 The International Union of Biochemistry and Molecular Biology.

Quality assessment for color reproduction using a blind metric

NASA Astrophysics Data System (ADS)

Bringier, B.; Quintard, L.; Larabi, M.-C.

2007-01-01

This paper deals with image quality assessment. This field plays nowadays an important role in various image processing applications. Number of objective image quality metrics, that correlate or not, with the subjective quality have been developed during the last decade. Two categories of metrics can be distinguished, the first with full-reference and the second with no-reference. Full-reference metric tries to evaluate the distortion introduced to an image with regards to the reference. No-reference approach attempts to model the judgment of image quality in a blind way. Unfortunately, the universal image quality model is not on the horizon and empirical models established on psychophysical experimentation are generally used. In this paper, we focus only on the second category to evaluate the quality of color reproduction where a blind metric, based on human visual system modeling is introduced. The objective results are validated by single-media and cross-media subjective tests.

Learning Strategies Assessed by Journal Writing: Prediction of Learning Outcomes by Quantity, Quality, and Combinations of Learning Strategies

ERIC Educational Resources Information Center

Glogger, Inga; Schwonke, Rolf; Holzapfel, Lars; Nuckles, Matthias; Renkl, Alexander

2012-01-01

Recently, there have been efforts to rethink assessment. Instead of informing about (relatively stable) learner characteristics, assessment should assist instruction by looking at the learning process, facilitating feedback about what students' next step in learning could be. Similarly, new forms of strategy assessment aim at capturing…

Quality of Voluntary Medical Male Circumcision Services during Scale-Up: A Comparative Process Evaluation in Kenya, South Africa, Tanzania and Zimbabwe

PubMed Central

Jennings, Larissa; Bertrand, Jane; Rech, Dino; Harvey, Steven A.; Hatzold, Karin; Samkange, Christopher A.; Omondi Aduda, Dickens S.; Fimbo, Bennett; Cherutich, Peter; Perry, Linnea; Castor, Delivette; Njeuhmeli, Emmanuel

2014-01-01

Background The rapid expansion of voluntary medical male circumcision (VMMC) has raised concerns whether health systems can deliver and sustain VMMC according to minimum quality criteria. Methods and Findings A comparative process evaluation was used to examine data from SYMMACS, the Systematic Monitoring of the Voluntary Medical Male Circumcision Scale-Up, among health facilities providing VMMC across two years of program scale-up. Site-level assessments examined the availability of guidelines, supplies and equipment, infection control, and continuity of care services. Direct observation of VMMC surgeries were used to assess care quality. Two sample tests of proportions and t-tests were used to examine differences in the percent of facilities meeting requisite preparedness standards and the mean number of directly-observed surgical tasks performed correctly. Results showed that safe, high quality VMMC can be implemented and sustained at-scale, although substantial variability was observed over time. In some settings, facility preparedness and VMMC service quality improved as the number of VMMC facilities increased. Yet, lapses in high performance and expansion of considerably deficient services were also observed. Surgical tasks had the highest quality scores, with lower performance levels in infection control, pre-operative examinations, and post-operative patient monitoring and counseling. The range of scale-up models used across countries additionally underscored the complexity of delivering high quality VMMC. Conclusions Greater efforts are needed to integrate VMMC scale-up and quality improvement processes in sub-Saharan African settings. Monitoring of service quality, not just adverse events reporting, will be essential in realizing the full health impact of VMMC for HIV prevention. PMID:24801073

Total Quality Management: Implications for Educational Assessment.

ERIC Educational Resources Information Center

Rankin, Stuart C.

1992-01-01

Deming's "System of Profound Knowledge" is even more fundamental than his 14-principle system transformation guide and is based on 4 elements: systems theory, statistical variation, a theory of knowledge, and psychology. Management should revamp total system processes so that quality of product is continually improved. Implications for…

Evaluating software development characteristics: Assessment of software measures in the Software Engineering Laboratory. [reliability engineering

NASA Technical Reports Server (NTRS)

Basili, V. R.

1981-01-01

Work on metrics is discussed. Factors that affect software quality are reviewed. Metrics is discussed in terms of criteria achievements, reliability, and fault tolerance. Subjective and objective metrics are distinguished. Product/process and cost/quality metrics are characterized and discussed.

Integrating the Curriculum: Quality and Relevance for Special Needs Children.

ERIC Educational Resources Information Center

Wessel, Janet A.

A comprehensive, integrated physical education system that has quality and relevance for handicapped students and their nonhandicapped peers is proposed. The Achievement Based Curriculum (ABC) Model is a systematic decision-making process for an instructional system that incorporates curriculum, instruction, assessment, and evaluation in one…

[Quality indicators in the storage and dispensing process in a Hospital Pharmacy].

PubMed

Rabuñal-Álvarez, M T; Calvin-Lamas, M; Feal-Cortizas, B; Martínez-López, L M; Pedreira-Vázquez, I; Martín-Herranz, M I

2014-01-01

To establish indicators for the evaluation of the quality of the storage and dispensing processes related to semiautomatic vertical (SAVCS) and horizontal (SAHCS) carousel systems. Descriptive observational study conducted between January-December 2012. Definition of quality indicators, a target value is established and an obtained value is calculated for 2012. Five quality indicators in the process of storage and dispensing of drugs were defined and calculated: indicator 1, error filling unidose trolleys: target (<1.67%), obtained (1.03%); indicator 2, filling accuracy unidose trolleys by using an SAVCS: target (<15%), obtained (11.5%); indicator 3, reliability of drug inventory in the process of drug entries using an SAHCS: target (<15%), obtained (6.53%); indicator 4, reliability of drug inventory in the picking process of orders replacement stock of clinical units using an SAHCS: target (<10%), obtained (1.97%); indicator 5, accuracy of the picking process of drug orders using an SAHCS: target (<10%), obtained (10.41%). Establishing indicators has allowed the quality in terms of safety, precision and reliability of semiautomatic systems for storage and dispensing drugs to be assessed. Copyright © 2014 SECA. Published by Elsevier Espana. All rights reserved.

CVD2014-A Database for Evaluating No-Reference Video Quality Assessment Algorithms.

PubMed

Nuutinen, Mikko; Virtanen, Toni; Vaahteranoksa, Mikko; Vuori, Tero; Oittinen, Pirkko; Hakkinen, Jukka

2016-07-01

In this paper, we present a new video database: CVD2014-Camera Video Database. In contrast to previous video databases, this database uses real cameras rather than introducing distortions via post-processing, which results in a complex distortion space in regard to the video acquisition process. CVD2014 contains a total of 234 videos that are recorded using 78 different cameras. Moreover, this database contains the observer-specific quality evaluation scores rather than only providing mean opinion scores. We have also collected open-ended quality descriptions that are provided by the observers. These descriptions were used to define the quality dimensions for the videos in CVD2014. The dimensions included sharpness, graininess, color balance, darkness, and jerkiness. At the end of this paper, a performance study of image and video quality algorithms for predicting the subjective video quality is reported. For this performance study, we proposed a new performance measure that accounts for observer variance. The performance study revealed that there is room for improvement regarding the video quality assessment algorithms. The CVD2014 video database has been made publicly available for the research community. All video sequences and corresponding subjective ratings can be obtained from the CVD2014 project page (http://www.helsinki.fi/psychology/groups/visualcognition/).

[Quality indicators for National Disease Management Guidelines using the example of the National Disease Management Guideline for "Chronic Heart Failure"].

PubMed

Nothacker, Monika Judith; Langer, Thomas; Weinbrenner, Susanne

2011-01-01

Together with an expert committee a structured approach to determining quality indicators for National Disease Management Guidelines has been developed. The key steps of this approach include: introducing guideline authors to the methodology at an early stage of the process of guideline development, pre-selecting recommendations of the guideline which are potentially measurable by means of quality indicators, assessing the potentially measurable quality indicators in written form using five criteria (including their importance for the health care system and clarity of definitions) and approving them in a formal consensus process. For lack of a database these quality indicators must be regarded as preliminary. For the National Disease Management Guideline "Chronic Heart Failure" nine rate-based indicators have been chosen. The indicators correspond to important strong recommendations (grade of recommendation: A) from the fields of diagnosis (two), general therapeutic strategy (two), specific treatment (three), clinical monitoring (one) and co-ordination of care (one). In a second step, the quality indicators have to be validated within a pilot project. The determination and assessment of the potential quality indicators have revealed room for improvement of guideline development. In particular, there is a need for more health care data and for specification of recommendations.

Venous Thromboembolism Quality Measures Fail to Accurately Measure Quality.

PubMed

Lau, Brandyn D; Streiff, Michael B; Pronovost, Peter J; Haut, Elliott R

2018-03-20

Venous thromboembolism (VTE) is 1 of the most common causes of preventable harm for patients in hospitals. Consequently, the Joint Commission, the Centers for Medicare and Medicaid Services, the Agency for Healthcare Research and Quality, the United Kingdom Care Quality Commission, the Australian Commission on Safety and Quality in Health Care, the Maryland Health Services Cost Review Commission, and the American College of Surgeons have prioritized measuring and reporting VTE outcomes with the goal of reducing the incidence of and preventable harm from VTE. We developed a rubric for defect-free VTE prevention, graded each organizational VTE quality measure, and found that none of the current VTE-related quality measures adequately characterizes VTE prevention efforts or outcomes in hospitalized patients. Effective VTE prevention is multifactorial: clinicians must assess patients' risk for VTE and prescribe therapy appropriate for each patient's risk profile, patients must accept the prescribed therapy, and nurses must administer the therapy as prescribed. First, an ideal, defect-free VTE prevention process measure requires: (1) documentation of a standardized VTE risk assessment; (2) prescription of optimal, risk-appropriate VTE prophylaxis; and (3) administration of all risk-appropriate VTE prophylaxis as prescribed. Second, an ideal VTE outcome measure should define potentially preventable VTE as VTE that developed in patients who experienced any VTE prevention process failures. © 2018 American Heart Association, Inc.

Assessing accuracy and precision for field and laboratory data: a perspective in ecosystem restoration

USGS Publications Warehouse

Stapanian, Martin A.; Lewis, Timothy E; Palmer, Craig J.; Middlebrook Amos, Molly

2016-01-01

Unlike most laboratory studies, rigorous quality assurance/quality control (QA/QC) procedures may be lacking in ecosystem restoration (“ecorestoration”) projects, despite legislative mandates in the United States. This is due, in part, to ecorestoration specialists making the false assumption that some types of data (e.g. discrete variables such as species identification and abundance classes) are not subject to evaluations of data quality. Moreover, emergent behavior manifested by complex, adapting, and nonlinear organizations responsible for monitoring the success of ecorestoration projects tend to unconsciously minimize disorder, QA/QC being an activity perceived as creating disorder. We discuss similarities and differences in assessing precision and accuracy for field and laboratory data. Although the concepts for assessing precision and accuracy of ecorestoration field data are conceptually the same as laboratory data, the manner in which these data quality attributes are assessed is different. From a sample analysis perspective, a field crew is comparable to a laboratory instrument that requires regular “recalibration,” with results obtained by experts at the same plot treated as laboratory calibration standards. Unlike laboratory standards and reference materials, the “true” value for many field variables is commonly unknown. In the laboratory, specific QA/QC samples assess error for each aspect of the measurement process, whereas field revisits assess precision and accuracy of the entire data collection process following initial calibration. Rigorous QA/QC data in an ecorestoration project are essential for evaluating the success of a project, and they provide the only objective “legacy” of the dataset for potential legal challenges and future uses.

[Assessment of financial performance improves the quality of healthcare provided by medical organizations].

PubMed

Afek, Arnon; Meilik, Ahuva; Rotstein, Zeev

2009-01-01

Today, medical organizations have to contend with a highly competitive environment, an atmosphere saturated with a multitude of innovative new technologies and ever-increasing costs. The ability of these organizations to survive and to develop and expand their services mandates adoption of management guidelines based on the world of finance/commerce, adapted to make them relevant to the world of medical service. In this article the authors chose to present a management administration assessment which is a process that ensures that the management will effectively administer the organization's resources, and meet the goals set by the organization. The system demands that hospital "centers of responsibility" be defined, a management information system be set up, activities be priced, budget be defined and the expenses assessed. These processes make it possible to formulate a budget and assess any possible deviation between the budget and the actual running costs. An assessment of deviations will reveal any possible deviation of the most significant factor--efficiency. Medical organization managers, with the cooperation of the directors of the "centers of responsibility", can assess subunit activities and gain an understanding of the significance of management decisions and thus improve the quality of management, and the medical organization. The goal of this management system is not only to Lower costs and to meet the financial goals that were set; it is a tool that ensures quality. Decreasing expenditure is important in this case, but is only secondary in importance and will be a result of reducing the costs incurred by services lacking in quality.

Environmental toxicology and risk assessment: Standardization of biomarkers for endocrine disruption and environmental assessment: Eighth volume. Special technical publication 1364

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henshel, D.S.; Black, M.C.; Harrass, M.C.

1999-07-01

This conference was held April 20--22, 1998 in Atlanta, Georgia. The purpose of this conference was to provide a multidisciplinary forum for exchange of state-of-the-art information on biological markers in toxicology and risk assessment, including endocrine disrupter screening assays. Attention is focused on the following: aquatic toxicology; behavioral toxicology; biochemical indicators; developmental indicators; endocrine indicators; biodegradation and fate of chemicals; quality assurance and quality control within laboratory and field studies; risk assessment and communication, and harmonization of standards development. Individual papers have been processed separately for inclusion in the appropriate data bases.

River habitat assessment for ecological restoration of Wei River Basin, China.

PubMed

Yang, Tao; Wang, Shuo; Li, Xiaoping; Wu, Ting; Li, Li; Chen, Jia

2018-04-11

As an important composition component of river ecosystems, river habitats must undergo quality assessment to potentially provide scientific basis for river ecological restoration. Substrate composition, habitat complexity, bank erosion degree, river meandering degree, human activity intensity, vegetation buffer width, water quality, and water condition were determined as indicators for river habitat assessment. The comprehensive habitat quality index (CHQI) was established for the Wei River Basin. In addition, the indicator values were determined on the basis of a field investigation at 12 national hydrological stations distributed across the Wei, Jing, and Beiluo Rivers. The analytic hierarchy process was used to determine the indicator weights and thus distinguish the relative importance of the assessment indicator system. Results indicated that the average CHQIs for the Wei, Jing, and Beiluo Rivers were 0.417, 0.508, and 0.304, respectively. The river habitat quality for the three rivers was well. As for the whole river basin, the river habitat quality for 25% of the cross section was very well, the other 25% was well, and the 50% remaining was in critical state. The river habitat quality of the Jing River was better than that of the Wei and Beiluo Rivers.

Benefits of a comprehensive quality program for cryopreserved PBMC covering 28 clinical trials sites utilizing an integrated, analytical web-based portal.

PubMed

Ducar, Constance; Smith, Donna; Pinzon, Cris; Stirewalt, Michael; Cooper, Cristine; McElrath, M Juliana; Hural, John

2014-07-01

The HIV Vaccine Trials Network (HVTN) is a global network of 28 clinical trial sites dedicated to identifying an effective HIV vaccine. Cryopreservation of high-quality peripheral blood mononuclear cells (PBMC) is critical for the assessment of vaccine-induced cellular immune functions. The HVTN PBMC Quality Management Program is designed to ensure that viable PBMC are processed, stored and shipped for clinical trial assays from all HVTN clinical trial sites. The program has evolved by developing and incorporating best practices for laboratory and specimen quality and implementing automated, web-based tools. These tools allow the site-affiliated processing laboratories and the central Laboratory Operations Unit to rapidly collect, analyze and report PBMC quality data. The HVTN PBMC Quality Management Program includes five key components: 1) Laboratory Assessment, 2) PBMC Training and Certification, 3) Internal Quality Control, 4) External Quality Control (EQC), and 5) Assay Specimen Quality Control. Fresh PBMC processing data is uploaded from each clinical site processing laboratory to a central HVTN Statistical and Data Management Center database for access and analysis on a web portal. Samples are thawed at a central laboratory for assay or specimen quality control and sample quality data is uploaded directly to the database by the central laboratory. Four year cumulative data covering 23,477 blood draws reveals an average fresh PBMC yield of 1.45×10(6)±0.48 cells per milliliter of useable whole blood. 95% of samples were within the acceptable range for fresh cell yield of 0.8-3.2×10(6) cells/ml of usable blood. Prior to full implementation of the HVTN PBMC Quality Management Program, the 2007 EQC evaluations from 10 international sites showed a mean day 2 thawed viability of 83.1% and a recovery of 67.5%. Since then, four year cumulative data covering 3338 specimens used in immunologic assays shows that 99.88% had acceptable viabilities (>66%) for use in cellular assays (mean, 91.46% ±4.5%), and 96.2% had acceptable recoveries (50%-130%) with a mean of recovery of 85.8% ±19.12% of the originally cryopreserved cells. EQC testing revealed that since August 2009, failed recoveries dropped from 4.1% to 1.6% and failed viabilities dropped from 1.0% to 0.3%. The HVTN PBMC quality program provides for laboratory assessment, training and tools for identifying problems, implementing corrective action and monitoring for improvements. These data support the benefits of implementing a comprehensive, web-based PBMC quality program for large clinical trials networks. Copyright © 2014 Elsevier B.V. All rights reserved.

Designing-and Redesigning-Information Services for Maximum Impact.

ERIC Educational Resources Information Center

Jones, Rebecca; Dysart, Jane

2002-01-01

Discusses innovative information services, including new services and the redesign of existing services. Describes the development process, including assessing the market and developing a marketing plan; and explains the implementation process, including monitoring client satisfaction and quality control. (LRW)

Nursing issues in renal replacement therapy: organization, manpower assessment, competency evaluation and quality improvement processes.

PubMed

Graham, Patricia; Lischer, Eileen

2011-01-01

For the patient with acute kidney injury, continuous renal replacement therapy (CRRT) is a treatment option that has application for the hemodynamically unstable critically ill patient. The decision to initiate a continuous renal replacement modality depends not only on the physician, either the nephrologist or intensivist, but also on the availability of specially trained nursing resources. This article will explore the nursing collaborative model of care at a large university-based research and teaching Medical Center in Southern California. The focus will be on nursing issues in CRRT including organization of educational programs, manpower assessment, competency evaluation, and quality improvement processes. © 2011 Wiley Periodicals, Inc.

Multivariate Statistical Analysis: a tool for groundwater quality assessment in the hidrogeologic region of the Ring of Cenotes, Yucatan, Mexico.

NASA Astrophysics Data System (ADS)

Ye, M.; Pacheco Castro, R. B.; Pacheco Avila, J.; Cabrera Sansores, A.

2014-12-01

The karstic aquifer of Yucatan is a vulnerable and complex system. The first fifteen meters of this aquifer have been polluted, due to this the protection of this resource is important because is the only source of potable water of the entire State. Through the assessment of groundwater quality we can gain some knowledge about the main processes governing water chemistry as well as spatial patterns which are important to establish protection zones. In this work multivariate statistical techniques are used to assess the groundwater quality of the supply wells (30 to 40 meters deep) in the hidrogeologic region of the Ring of Cenotes, located in Yucatan, Mexico. Cluster analysis and principal component analysis are applied in groundwater chemistry data of the study area. Results of principal component analysis show that the main sources of variation in the data are due sea water intrusion and the interaction of the water with the carbonate rocks of the system and some pollution processes. The cluster analysis shows that the data can be divided in four clusters. The spatial distribution of the clusters seems to be random, but is consistent with sea water intrusion and pollution with nitrates. The overall results show that multivariate statistical analysis can be successfully applied in the groundwater quality assessment of this karstic aquifer.

[Real-time detection of quality of Chinese materia medica: strategy of NIR model evaluation].

PubMed

Wu, Zhi-sheng; Shi, Xin-yuan; Xu, Bing; Dai, Xing-xing; Qiao, Yan-jiang

2015-07-01

The definition of critical quality attributes of Chinese materia medica ( CMM) was put forward based on the top-level design concept. Nowadays, coupled with the development of rapid analytical science, rapid assessment of critical quality attributes of CMM was firstly carried out, which was the secondary discipline branch of CMM. Taking near infrared (NIR) spectroscopy as an example, which is a rapid analytical technology in pharmaceutical process over the past decade, systematic review is the chemometric parameters in NIR model evaluation. According to the characteristics of complexity of CMM and trace components analysis, a multi-source information fusion strategy of NIR model was developed for assessment of critical quality attributes of CMM. The strategy has provided guideline for NIR reliable analysis in critical quality attributes of CMM.

Quality Measures for the Care of Patients with Narcolepsy

PubMed Central

Krahn, Lois E.; Hershner, Shelley; Loeding, Lauren D.; Maski, Kiran P.; Rifkin, Daniel I.; Selim, Bernardo; Watson, Nathaniel F.

2015-01-01

The American Academy of Sleep Medicine (AASM) commissioned a Workgroup to develop quality measures for the care of patients with narcolepsy. Following a comprehensive literature search, 306 publications were found addressing quality care or measures. Strength of association was graded between proposed process measures and desired outcomes. Following the AASM process for quality measure development, we identified three outcomes (including one outcome measure) and seven process measures. The first desired outcome was to reduce excessive daytime sleepiness by employing two process measures: quantifying sleepiness and initiating treatment. The second outcome was to improve the accuracy of diagnosis by employing the two process measures: completing both a comprehensive sleep history and an objective sleep assessment. The third outcome was to reduce adverse events through three steps: ensuring treatment follow-up, documenting medical comorbidities, and documenting safety measures counseling. All narcolepsy measures described in this report were developed by the Narcolepsy Quality Measures Work-group and approved by the AASM Quality Measures Task Force and the AASM Board of Directors. The AASM recommends the use of these measures as part of quality improvement programs that will enhance the ability to improve care for patients with narcolepsy. Citation: Krahn LE, Hershner S, Loeding LD, Maski KP, Rifkin DI, Selim B, Watson NF. Quality measures for the care of patients with narcolepsy. J Clin Sleep Med 2015;11(3):335–355. PMID:25700880

Data Quality Verification at STScI - Automated Assessment and Your Data

NASA Astrophysics Data System (ADS)

Dempsey, R.; Swade, D.; Scott, J.; Hamilton, F.; Holm, A.

1996-12-01

As satellite based observatories improve their ability to deliver wider varieties and more complex types of scientific data, so to does the process of analyzing and reducing these data. It becomes correspondingly imperative that Guest Observers or Archival Researchers have access to an accurate, consistent, and easily understandable summary of the quality of their data. Previously, at the STScI, an astronomer would display and examine the quality and scientific usefulness of every single observation obtained with HST. Recently, this process has undergone a major reorganization at the Institute. A major part of the new process is that the majority of data are assessed automatically with little or no human intervention. As part of routine processing in the OSS--PODPS Unified System (OPUS), the Observatory Monitoring System (OMS) observation logs, the science processing trailer file (also known as the TRL file), and the science data headers are inspected by an automated tool, AUTO_DQ. AUTO_DQ then determines if any anomalous events occurred during the observation or through processing and calibration of the data that affects the procedural quality of the data. The results are placed directly into the Procedural Data Quality (PDQ) file as a string of predefined data quality keywords and comments. These in turn are used by the Contact Scientist (CS) to check the scientific usefulness of the observations. In this manner, the telemetry stream is checked for known problems such as losses of lock, re-centerings, or degraded guiding, for example, while missing data or calibration errors are also easily flagged. If the problem is serious, the data are then queued for manual inspection by an astronomer. The success of every target acquisition is verified manually. If serious failures are confirmed, the PI and the scheduling staff are notified so that options concerning rescheduling the observations can be explored.

Patient satisfaction in Japan.

PubMed

Elleuch, Amira

2008-01-01

To extend existing knowledge about health care quality and patient satisfaction by exploring Japanese context having a different health care system and a different culture from the USA and Europe. A structural equation model is used to explore links between quality perception and patient satisfaction as well as between patient satisfaction and intentional behavior relying on 159 Japanese outpatient replies. Japanese healthcare service quality is evaluated using its process characteristics (patient-provider interaction) and physical attributes (settings and appearance). Process quality attributes were found to be patient satisfaction antecedents. Satisfaction in turn predicts patient intentional behavior (to return and to recommend). Japanese society cultural specificity seems to be an interesting background to understand Japanese evaluation when patients assess health service quality. The sample investigated is relatively small. The study relied on a linear approach to assess patient satisfaction and intentional behavior. However, the non-linear model should yield a better reality fit. To improve Japanese patient satisfaction, cultural values such as courtesy, empathy and harmony should be emphasized when delivering medical services. Satisfied consumers are an important asset for the healthcare provider as they intend to reuse the service and to recommend it to their families and friends. Both foreign and Japanese providers should adopt a consumer perspective to enhance the service quality and then to maintain long-term relationships with their customers. The study used structural equation analysis to assess patient satisfaction in a scarcely investigated context. Moreover, the study relies on Japanese society's cultural characteristics to explain and understand results.

Measurement properties of rheumatoid arthritis-specific quality-of-life questionnaires: systematic review of the literature.

PubMed

Lee, Jiyeon; Kim, Soo Hyun; Moon, Seung Hei; Lee, Eun-Hyun

2014-12-01

This study conducted a systematic review of the methodological quality of the psychometric evaluation process and the quality of measurement properties of rheumatoid arthritis (RA)-specific health-related quality-of-life (HRQOL) questionnaires with the purpose of obtaining the best evidence to help in the selection of the most appropriate instrument for measuring HRQOL in RA patients. A systematic literature search was performed to identify RA-specific HRQOL questionnaires in databases. The methodological quality of the studies was assessed using the Consensus-based Standards for the Selection of Health Measurement Instruments checklist. The quality of the measurement properties was assessed using quality criteria. The evidence regarding the measurement properties was pooled using best-evidence synthesis, with considerations of the number and methodological quality of the studies, and the consistency of their findings in terms of the quality of the measurement properties. The search identified 37 studies describing 9 instruments. Best-evidence synthesis suggested that the Rheumatoid Arthritis Quality of Life (RAQoL) questionnaire had the strongest positive evidence, especially with respect to reliability, measurement error, and content validity, and moderate positive evidence with respect to hypothesis testing and responsiveness. The current evidence suggests that the best-validated instrument among the RA-specific HRQOL measures is the RAQoL questionnaire in terms of both methodological quality in the process of psychometric evaluation and the quality of the measurement properties. However, there is limited evidence regarding internal consistency and structural validity of the RAQoL. Further efforts are warranted to establish the psychometric quality of this questionnaire.

Intervention quality is not routinely assessed in Cochrane systematic reviews of radiation therapy interventions.

PubMed

Abdul Rahim, Mohamad R; James, Melissa L; Hickey, Brigid E

2017-10-01

The aim of this study was to maximise the benefits from clinical trials involving technological interventions such as radiation therapy. High compliance to the quality assurance protocols is crucial. We assessed whether the quality of radiation therapy intervention was evaluated in Cochrane systematic reviews. We searched 416 published Cochrane systematic reviews and identified 67 Cochrane systematic reviews that investigated radiation therapy or radiotherapy as an intervention. For each systematic review, either quality assurance or quality control for the intervention was identified by a description of such processes in the published systematic reviews. Of the 67 Cochrane systematic reviews studied, only two mentioned quality assurance or quality control. Our findings revealed that 65 of 67 (97%) Cochrane systematic reviews of radiation therapy interventions failed to consider the quality of the intervention. We suggest that advice about the evaluation of intervention quality be added to author support materials. © 2017 The Royal Australian and New Zealand College of Radiologists.

LANDSCAPE ASSESSMENT TOOLS FOR WATERSHED CHARACTERIZATION

EPA Science Inventory

A combination of process-based, empirical and statistical models has been developed to assist states in their efforts to assess water quality, locate impairments over large areas, and calculate TMDL allocations. By synthesizing outputs from a number of these tools, LIPS demonstr...

Sharing Craft Knowledge: The Soul of Principal Peer Assessment.

ERIC Educational Resources Information Center

Abbott, James E.

1996-01-01

Describes the implementation of a peer assessment process for school principals using a New Skills Profile of essential craft skills: teaching methods, budgetary competence, networking, technological literacy, communication, leadership, conflict resolution, diversity, systems thinking, and Total Quality Management principles. Participating…

The spectrum-effect relationship-a rational approach to screening effective compounds, reflecting the internal quality of Chinese herbal medicine.

PubMed

Zhu, Chun-Sheng; Lin, Zhi-Jian; Xiao, Ming-Liang; Niu, Hong-Juan; Zhang, Bing

2016-03-01

Since the chromatographic fingerprint was introduced, it has been accepted by many countries to assess the quality and authenticity of Chinese herbal medicine (CHM). However, solely using the chromatographic fingerprint to assay numerous chemicals is not suitable for the assessment of the whole internal quality and pharmacodynamics of CHM. Consequently, it is necessary to develop a rational approach to connecting the chromatographic fingerprint with effective components to assess the internal quality of CHM. For this purpose, a spectrum-effect relationship theory was proposed and accepted as a new method for the assessment of CHM because of its potential use to screen effective components from CHM. In this paper, we systematically reviewed the application of the spectrum-effect relationship theory in the research of CHM, including research mentality, different chromatographic analysis techniques, data processing technologies, and structure determination. Copyright © 2016 China Pharmaceutical University. Published by Elsevier B.V. All rights reserved.

Market Innovation, Rational Housing Supply and Urban Quality at the Neighbourhood Scale

NASA Astrophysics Data System (ADS)

Puglisi, Valentina; Celani, Alberto

2017-10-01

Innovation of product, process and markets are the three categories to assess the improvement of a sector. This document is aimed to provide a review of papers about innovation in housing market and analyses solutions adopted by the international market in terms of definition of attributes of housing products. Enlightening aspects linked to quality attributes of housing products and it has been tried to read a common scheme in any study analysed to provide solutions to set innovation hints to enhance market innovation in the sector. The idea of choice, user and buyer categories definition, assessment and rating system is the backbone of the paper, as the parallelism between marketing of industrial goods and services and built environment objects. Quality of the neighbourhood and the idea of an ex-post assessment is the theme behind the last case presented, based on a research made by ABC Department of Politecnico di Milano in a neighbourhood in Milano, aimed to assess its quality.

[Analysis of productivity, quality and cost of first grade laboratories: blood biometry].

PubMed

Avila, L; Hernández, P; Cruz, A; Zurita, B; Terres, A M; Cruz, C

1999-04-01

Assessment of productivity, quality and production costs and determination of the efficiency of top grade clinical laboratories in Mexico. Ten laboratories were selected from among the total number (52) existing in Mexico City, and the Donabedian model of structure, process and results were applied. Blood count was selected as a tracer. The principal problems found were: inadequate distribution of trained human resources, poor glass material, inadequate analytic process and low productivity. These factors are reflected in the unit costs, which exceed reference laboratory costs by 200%. Only 50% of the laboratories analyzed generate reliable results. Only 20% of the laboratories studied operate efficiently. To solve the problems identified requires integral strategies at different levels. A specific recomendation for the improvement of quality and productivity is an assessment of the cost/benefit of creating a central laboratory and using the remaining sites exclusively for the collection of samples.

Assessment of the quality of groundwater and the Little Wind River in the area of a former uranium processing facility on the Wind River Reservation, Wyoming, 1987 through 2010

USGS Publications Warehouse

Ranalli, Anthony J.; Naftz, David L.

2014-01-01

In 2010, the U.S Geological Survey (USGS), in cooperation with the Wind River Environmental Quality Commission (WREQC), began an assessment of the effectiveness of the existing monitoring network at the Riverton, Wyoming, Uranium Mill Tailings Remedial Action (UMTRA) site. The USGS used existing data supplied by the U.S. Department of Energy (DOE). The study was to determine (1) seasonal variations in the direction of groundwater flow in the area of the former uranium processing facility toward the Little Wind River, (2) the extent of contaminated groundwater among the aquifers and between the aquifers and the Little Wind River, (3) whether current monitoring is adequate to establish the effectiveness of natural attenuation for the contaminants of concern, and (4) the influence of groundwater discharged from the sulfuric-acid plant on water quality in the Little Wind River.

Quality of life and wellbeing of the elderly in Lebanese nursing homes.

PubMed

Doumit, Jacqueline; Nasser, Ramzi

2010-01-01

The purpose of this paper is to assess quality of life in relation to wellbeing among Lebanese nursing home elderly residents. The study attempts to understand the impact of structures, processes and skills on elderly health status. In this paper, 220 normally functioning elderly respondents from 33 nursing homes were studied. A quasi-experimental approach measured psychological and health-related factors using the Geriatric Depression Scale, Activity of Daily Living, EuroQol EQ-5D and the Mini-Nutritional Assessment (MNA) instruments. A relatively high level of mild depression among elderly residents and a lack of mobility were found. Generally, normally functioning elderly residents were well nourished and had moderate daily activity levels. The study is original in the sense that it assesses elderly residents' psychological and physical health status in relation to institutional structures, processes, and skills.

Perceptual full-reference quality assessment of stereoscopic images by considering binocular visual characteristics.

PubMed

Shao, Feng; Lin, Weisi; Gu, Shanbo; Jiang, Gangyi; Srikanthan, Thambipillai

2013-05-01

Perceptual quality assessment is a challenging issue in 3D signal processing research. It is important to study 3D signal directly instead of studying simple extension of the 2D metrics directly to the 3D case as in some previous studies. In this paper, we propose a new perceptual full-reference quality assessment metric of stereoscopic images by considering the binocular visual characteristics. The major technical contribution of this paper is that the binocular perception and combination properties are considered in quality assessment. To be more specific, we first perform left-right consistency checks and compare matching error between the corresponding pixels in binocular disparity calculation, and classify the stereoscopic images into non-corresponding, binocular fusion, and binocular suppression regions. Also, local phase and local amplitude maps are extracted from the original and distorted stereoscopic images as features in quality assessment. Then, each region is evaluated independently by considering its binocular perception property, and all evaluation results are integrated into an overall score. Besides, a binocular just noticeable difference model is used to reflect the visual sensitivity for the binocular fusion and suppression regions. Experimental results show that compared with the relevant existing metrics, the proposed metric can achieve higher consistency with subjective assessment of stereoscopic images.

Use of Data Quality Index in Student Feedback for Quality Assurance of Engineering Programmes at the Military Technological College, Muscat, Oman

ERIC Educational Resources Information Center

Khan, Wasi Uz Zaman; AlAjmi, Abdullah Ahmed Ali; Al Zubaidy, Sarim

2018-01-01

This case study was undertaken to assess the effectiveness of the modifications into the engineering programmes adopted by the Military Technological College (MTC) to satisfy the needs of Omani armed forces. It discusses the role of Quality Assurance (QA) in engineering education and accreditation process in the context of four engineering…

Quality assessment of medical education at faculty of medicine of sarajevo university - comparison of assessment between students in bologna process and old system of studying.

PubMed

Masic, Izet

2013-01-01

NONE DECLARED. The quality of the teaching-learning process at the universities in Bosnia and Herzegovina and abroad depends mainly of infrastructure that includes an optimal teaching space, personnel and equipment, in accordance with existing standards and norms. For the assessment of teaching at the faculties, the opinion of students is very important (4, 5). Students are often unhappy with the educational process. To compare the results of the teaching process evaluation between students studying according to the Bologna system and the old system of education. We used the questionnaire as a carrier of data created with variables relevant for assessing the success of the educational process at the Medical Faculty in Sarajevo. The survey was conducted among students of the sixth year of the Medical Faculty in Sarajevo. There were 103 students surveyed, of which 32 were studying according to the Bologna and 71 by the old concept of studies. Results of survey which measured students satisfaction with the educational process (theoretical and practical instruction, interactive learning, testing, use of IT and technical aids in teaching, availability of instructional literature etc.) lead us to the conclusion that the lowest satisfaction is associated with factors depending on financial resources, specifically related to library funds and the degree of computerization of educational process, and also with the level of teachers capability to convey knowledge to students with the application of modern medical information technology and technical teaching aids.

Effect of psychosocial interventions on the quality of life of patients with colorectal cancer: a systematic review and meta-analysis.

PubMed

Son, Heesook; Son, Youn-Jung; Kim, Hyerang; Lee, Yoonju

2018-06-08

We conducted a systematic review and meta-analysis of randomized controlled trials examining the effect of psychosocial interventions on the quality of life of patients with colorectal cancer. We searched the main health-related databases for relevant papers. Then, we examined the titles and abstracts of the retrieved papers, applying exclusion criteria to filter out irrelevant papers; a more in-depth filtering process was then conducted by reading the full texts. Eight studies remained at the end of this process. Next, we performed data extraction and assessed the methodological quality of the selected studies. This was followed by computation of effect sizes and the heterogeneity of the results, and then an assessment of the potential bias. The systematic review found that most of the interventions in these eight studies did not have a significant effect on quality of life. Meanwhile, the meta-analysis, the overall effect of psychosocial interventions at the post-intervention period was found to be statistically significant but small. This meta-analysis provides evidence for the beneficial effect of face-to-face psychosocial interventions on the quality of life of colorectal cancer patients. It is, however, suggested that further studies be conducted on this topic to assess the roles of physical functioning and severity of symptoms before utilizing such face-to-face interventions.

Accreditations as Local Management Tools

ERIC Educational Resources Information Center

Cret, Benoit

2011-01-01

The development of accreditation agencies within the Higher Education sector in order to assess and guarantee the quality of services or product is still a growing phenomenon in Europe. Accreditations are conceived by institutional authors and by authors who directly deal with quality assurance processes as a means of legitimization or a means of…

Changes in cotton quality during ginning

USDA-ARS?s Scientific Manuscript database

Upland cotton gins across the cotton belt were sampled during the 2005-06 and 2006-07 ginning seasons to assess the changes in upland cotton quality during the ginning process and throughout the ginning season. Samples were taken at the module, feeder apron, and before and after lint cleaning at re...

Report: Differences in Processing Practices Could Decrease the Reliability of Ozone Data Used for Assessing Air Quality to Protect Public Health

EPA Pesticide Factsheets

Report #18-P-0105, February 28, 2018. There is a risk that the state, local and tribal agencies that monitor ambient air quality are not always implementing the EPA’s recommended QA practices for validating ozone data.

THE US EPA'S DERMAL EXPOSURE RESEARCH PROGRAM IN SUPPORT OF THE FOOD QUALITY PROTECTION ACT

EPA Science Inventory

The Food Quality Protection Act of 1996 (FQPA) requires that children's risks to pesticide exposures be considered during the tolerance-setting process. FQPA requires exposure assessments to be conducted for all pesticides sources, not just food sources. It also requires tha...

Validation of a digital mammographic unit model for an objective and highly automated clinical image quality assessment.

PubMed

Perez-Ponce, Hector; Daul, Christian; Wolf, Didier; Noel, Alain

2013-08-01

In mammography, image quality assessment has to be directly related to breast cancer indicator (e.g. microcalcifications) detectability. Recently, we proposed an X-ray source/digital detector (XRS/DD) model leading to such an assessment. This model simulates very realistic contrast-detail phantom (CDMAM) images leading to gold disc (representing microcalcifications) detectability thresholds that are very close to those of real images taken under the simulated acquisition conditions. The detection step was performed with a mathematical observer. The aim of this contribution is to include human observers into the disc detection process in real and virtual images to validate the simulation framework based on the XRS/DD model. Mathematical criteria (contrast-detail curves, image quality factor, etc.) are used to assess and to compare, from the statistical point of view, the cancer indicator detectability in real and virtual images. The quantitative results given in this paper show that the images simulated by the XRS/DD model are useful for image quality assessment in the case of all studied exposure conditions using either human or automated scoring. Also, this paper confirms that with the XRS/DD model the image quality assessment can be automated and the whole time of the procedure can be drastically reduced. Compared to standard quality assessment methods, the number of images to be acquired is divided by a factor of eight. Copyright © 2012 IPEM. Published by Elsevier Ltd. All rights reserved.

Metrology: Measurement Assurance Program Guidelines

NASA Technical Reports Server (NTRS)

Eicke, W. G.; Riley, J. P.; Riley, K. J.

1995-01-01

The 5300.4 series of NASA Handbooks for Reliability and Quality Assurance Programs have provisions for the establishment and utilization of a documented metrology system to control measurement processes and to provide objective evidence of quality conformance. The intent of these provisions is to assure consistency and conformance to specifications and tolerances of equipment, systems, materials, and processes procured and/or used by NASA, its international partners, contractors, subcontractors, and suppliers. This Measurement Assurance Program (MAP) guideline has the specific objectives to: (1) ensure the quality of measurements made within NASA programs; (2) establish realistic measurement process uncertainties; (3) maintain continuous control over the measurement processes; and (4) ensure measurement compatibility among NASA facilities. The publication addresses MAP methods as applied within and among NASA installations and serves as a guide to: control measurement processes at the local level (one facility); conduct measurement assurance programs in which a number of field installations are joint participants; and conduct measurement integrity (round robin) experiments in which a number of field installations participate to assess the overall quality of particular measurement processes at a point in time.

A tool for assessing the quality of nursing handovers: a validation study.

PubMed

Ferrara, Paolo; Terzoni, Stefano; Davì, Salvatore; Bisesti, Alberto; Destrebecq, Anne

2017-08-10

Handover, in particular between two shifts, is a crucial aspect of nursing for patient safety, aimed at ensuring continuity of care. During this process, several factors can affect quality of care and cause errors. This study aimed to assess quality of handovers, by validating the Handoff CEX-Italian scale. The scale was translated from English into Italian and the content validity index was calculated and internal consistency assessed. The scale was used in several units of the San Paolo Teaching Hospital in Milan, Italy. A total of 48 reports were assessed (192 evaluations). The median score was 6, interquartile range (IQR) [5;7] and was not influenced by specific (p=0.21) or overall working experience (p=0.13). The domains showing the lowest median values (median=6, IQR [4;8]) were context, communication, and organisation. Night to morning handovers obtained the lowest scores. CVI-S was 0.96, Cronbach's alpha was 0.79. The Handoff CEX-Italian scale is valid and reliable and it can be used to assess the quality of nurse handovers.

Does a quality management system improve quality in primary care practices in Switzerland? A longitudinal study

PubMed Central

Goetz, Katja; Hess, Sigrid; Jossen, Marianne; Huber, Felix; Rosemann, Thomas; Brodowski, Marc; Künzi, Beat; Szecsenyi, Joachim

2015-01-01

Objectives To examine the effectiveness of the quality management programme—European Practice Assessment—in primary care in Switzerland. Design Longitudinal study with three points of measurement. Setting Primary care practices in Switzerland. Participants In total, 45 of 91 primary care practices completed European Practice Assessment three times. Outcomes The interval between each assessment was around 36 months. A variance analyses for repeated measurements were performed for all 129 quality indicators from the domains: ‘infrastructure’, ‘information’, ‘finance’, and ‘quality and safety’ to examine changes over time. Results Significant improvements were found in three of four domains: ‘quality and safety’ (F=22.81, p<0.01), ‘information’ (F=27.901, p<0.01) and ‘finance’ (F=4.073, p<0.02). The 129 quality indicators showed a significant improvement within the three points of measurement (F=33.864, p<0.01). Conclusions The European Practice Assessment for primary care practices thus provides a functioning quality management programme, focusing on the sustainable improvement of structural and organisational aspects to promote high quality of primary care. The implementation of a quality management system which also includes a continuous improvement process would give added value to provide good care. PMID:25900466

Development of Indicators to Assess Quality of Care for Prostate Cancer.

PubMed

Nag, Nupur; Millar, Jeremy; Davis, Ian D; Costello, Shaun; Duthie, James B; Mark, Stephen; Delprado, Warick; Smith, David; Pryor, David; Galvin, David; Sullivan, Frank; Murphy, Áine C; Roder, David; Elsaleh, Hany; Currow, David; White, Craig; Skala, Marketa; Moretti, Kim L; Walker, Tony; De Ieso, Paolo; Brooks, Andrew; Heathcote, Peter; Frydenberg, Mark; Thavaseelan, Jeffery; Evans, Sue M

2016-02-20

The development, monitoring, and reporting of indicator measures that describe standard of care provide the gold standard for assessing quality of care and patient outcomes. Although indicator measures have been reported, little evidence of their use in measuring and benchmarking performance is available. A standard set, defining numerator, denominator, and risk adjustments, will enable global benchmarking of quality of care. To develop a set of indicators to enable assessment and reporting of quality of care for men with localised prostate cancer (PCa). Candidate indicators were identified from the literature. An international panel was invited to participate in a modified Delphi process. Teleconferences were held before and after each voting round to provide instruction and to review results. Panellists were asked to rate each proposed indicator on a Likert scale of 1-9 in a two-round iterative process. Calculations required to report on the endorsed indicators were evaluated and modified to reflect the data capture of the Prostate Cancer Outcomes Registry-Australia and New Zealand (PCOR-ANZ). A total of 97 candidate indicators were identified, of which 12 were endorsed. The set includes indicators covering pre-, intra-, and post-treatment of PCa care, within the limits of the data captured by PCOR-ANZ. The 12 endorsed quality measures enable international benchmarking on the quality of care of men with localised PCa. Reporting on these indicators enhances safety and efficacy of treatment, reduces variation in care, and can improve patient outcomes. PCa has the highest incidence of all cancers in men. Early diagnosis and relatively high survival rates mean issues of quality of care and best possible health outcomes for patients are important. This paper identifies 12 important measurable quality indicators in PCa care. Copyright © 2016 European Association of Urology. Published by Elsevier B.V. All rights reserved.

The role of optical flow in automated quality assessment of full-motion video

NASA Astrophysics Data System (ADS)

Harguess, Josh; Shafer, Scott; Marez, Diego

2017-09-01

In real-world video data, such as full-motion-video (FMV) taken from unmanned vehicles, surveillance systems, and other sources, various corruptions to the raw data is inevitable. This can be due to the image acquisition process, noise, distortion, and compression artifacts, among other sources of error. However, we desire methods to analyze the quality of the video to determine whether the underlying content of the corrupted video can be analyzed by humans or machines and to what extent. Previous approaches have shown that motion estimation, or optical flow, can be an important cue in automating this video quality assessment. However, there are many different optical flow algorithms in the literature, each with their own advantages and disadvantages. We examine the effect of the choice of optical flow algorithm (including baseline and state-of-the-art), on motionbased automated video quality assessment algorithms.

Instructional Assessment Strategies for Health and Physical Education

ERIC Educational Resources Information Center

Constantinou, Phoebe

2017-01-01

Assessment is an integral part of the instructional process. It can provide valuable information to both students and teachers. Assessments can be a vector to quality corrective instruction, a second chance for struggling students to demonstrate success, and a means to provide a more complex challenge for advanced students. This article discusses…

Assessing Higher-Order Cognitive Constructs by Using an Information-Processing Framework

ERIC Educational Resources Information Center

Dickison, Philip; Luo, Xiao; Kim, Doyoung; Woo, Ada; Muntean, William; Bergstrom, Betty

2016-01-01

Designing a theory-based assessment with sound psychometric qualities to measure a higher-order cognitive construct is a highly desired yet challenging task for many practitioners. This paper proposes a framework for designing a theory-based assessment to measure a higher-order cognitive construct. This framework results in a modularized yet…

Developing High-Quality Assessments that Align with Instructional Video Games. CRESST Report 774

ERIC Educational Resources Information Center

Vendlinski, Terry P.; Delacruz, Girlie C.; Buschang, Rebecca E.; Chung, Gregory K. W. K.; Baker, Eva L.

2010-01-01

The evaluation of educational interventions requires assessments that consistently (reliably) produce data from which accurate (valid) inferences about the test subjects can be made for some stated purpose. Despite codified definitions of all these terms, there remains vibrant debate about the assessment design process and how measures of…

Differences in the ability of spermatozoa from individual boar ejaculates to withstand different semen-processing techniques.

PubMed

Parrilla, Inma; del Olmo, David; Sijses, Laurien; Martinez-Alborcia, María J; Cuello, Cristina; Vazquez, Juan M; Martinez, Emilio A; Roca, Jordi

2012-05-01

The present study aimed to evaluate the ability of spermatozoa from individual boar ejaculates to withstand different semen-processing techniques. Eighteen sperm-rich ejaculate samples from six boars (three per boar) were diluted in Beltsville Thawing Solution and split into three aliquots. The aliquots were (1) further diluted to 3×10(7) sperm/mL and stored as a liquid at 17°C for 72 h, (2) frozen-thawed (FT) at 1×10(9) sperm/mL using standard 0.5-mL straw protocols, or (3) sex-sorted with subsequent liquid storage (at 17°C for 6 h) or FT (2×10(7) sperm/mL using a standard 0.25-mL straw protocol). The sperm quality was evaluated based on total sperm motility (the CASA system), viability (plasma membrane integrity assessed using flow cytometry and the LIVE/DEAD Sperm Viability Kit), lipid peroxidation (assessed via indirect measurement of the generation of malondialdehyde (MDA) using the BIOXYTECH MDA-586 Assay Kit) and DNA fragmentation (sperm chromatin dispersion assessed using the Sperm-Sus-Halomax(®) test). Data were normalized to the values assessed for the fresh (for liquid-stored and FT samples) or the sorted semen samples (for liquid stored and the FT sorted spermatozoa). All of the four sperm-processing techniques affected sperm quality (P<0.01), regardless of the semen donor, with reduced percentages of motile and viable sperm and increased MDA generation and percentages of sperm with fragmented DNA. Significant (P<0.05) inter-boar (effect of boars within each semen-processing technique) and intra-boar (effect of semen-processing techniques within each boar) differences were evident for all of the sperm quality parameters assessed, indicating differences in the ability of spermatozoa from individual boars to withstand the semen-processing techniques. These results are the first evidence that ejaculate spermatozoa from individual boars can respond in a boar-dependent manner to different semen-processing techniques. Copyright © 2012 Elsevier B.V. All rights reserved.

Tumorigenicity assessment of human cell-processed therapeutic products.

PubMed

Yasuda, Satoshi; Sato, Yoji

2015-09-01

Human pluripotent stem cells (hPSCs) are expected to be sources of various cell types used for cell therapy, although hPSCs are intrinsically tumorigenic and form teratomas in immunodeficient animals after transplant. Despite the urgent need, no detailed guideline for the assessment of tumorigenicity of human cell-processed therapeutic products (hCTPs) has been issued. Here we describe our consideration on tumorigenicity and related tests of hCTPs. The purposes of those tests for hPSC-based products are classified into three categories: 1) quality control of raw materials; 2) quality control of intermediate/final products; and 3) safety assessment of final products. Appropriate types of tests need to be selected, taking the purpose(s) into consideration. In contrast, human somatic (and somatic stem) cells are believed to have little tumorigenicity. Therefore, GMP-compliant quality control is essential to avoid contamination of somatic cell-derived products with tumorigenic cells. Compared with in vivo tumorigenicity tests, in vitro cell proliferation assays may be more useful and reasonable for detecting immortalized cells that have a growth advantage in somatic cell-based products. The results obtained from tumorigenicity and related tests for hCTPs should meet the criteria for decisions on product development, manufacturing processes, and clinical applications. Copyright © 2015.

Total Quality Management in Space Shuttle Main Engine manufacturing

NASA Technical Reports Server (NTRS)

Ding, J.

1992-01-01

The Total Quality Management (TQM) philosophy developed in the Marshall Space Flight Center (MSFC) is briefly reviewed and the ongoing TQM implementation effort which is being pursued through the continuous improvement (CI) process is discussed. TQM is based on organizational excellence which integrates the new supportive culture with the technical tools necessary to identify, assess, and correct manufacturing processes. Particular attention is given to the prime contractor's change to the organizational excellence management philosophy in SSME manufacturing facilities.

Quality Assessment of Physical and Organoleptic Instant Corn Rice on Scale-Up Process

NASA Astrophysics Data System (ADS)

Kumalasari, R.; Ekafitri, R.; Indrianti, N.

2017-12-01

Development of instant corn rice product has been successfully conducted on a laboratory scale. Corn has high carbohydrate content but low in fiber. The addition of fiber in instant corn rice, intended to improve the functioning of the product, and replace fiber loss during the process. Scale up process of Instant corn rice required to increase the production capacity. Scale up was the process to get identic output on a larger scale based on predetermined production scale. This study aimed to assess the changes and differences in the quality of instant corn rice during scale up. Instant corn rice scale up was done on production capacity 3 kg, 4 kg and 5 kg. Results showed that scale up of instant corn rice producing products with rehydration ratio ranges between 514% - 570%, the absorption rate ranged between 414% - 470%, swelling rate ranging between 119% - 134%, bulk density ranged from 0.3661 to 0.4745 (g/ml) and porosity ranging between 30-37%. The physical quality of instant corn rice on scale up were stable from the ones at laboratory scale on swelling rate, rehydration ratio, and absorption rate but not stable on bulk density and porosity. Organoleptic qualities were stable at increased scale compared on a laboratory scale. Bulk density was higher than those at laboratory scale, and the porosity was lower than those at laboratory scale.

Consumer Awareness and Willingness to Pay for High-Pressure Processing of Ready-to-Eat Food

ERIC Educational Resources Information Center

Hicks, Doris T.; Pivarnik, Lori F.; McDermott, Ryan; Richard, Nicole; Hoover, Dallas G.; Kniel, Kalmia E.

2009-01-01

Commercial, nonthermal processing of food, such as high hydrostatic-pressure processing (HPP), has increased. The safety and quality of foods produced by HPP has not been well communicated to the public. An online, nationwide consumer survey was implemented to assess awareness of alternative food processing technologies, consumer food safety…

[26th Conference of the Spanish Society of Quality in Healthcare: a good balance between quality, innovation, science and participation].

PubMed

Astier-Peña, M P; Barrasa-Villar, I; García-Mata, J R; Aranaz-Andrés, J; Enriquez-Martín, N; Vela-Marquina, M L

2010-01-01

The experience and learning process of preparing a scientific conference programme, organising and conducting a conference ccompletes the quality circle with the quantitative and qualitative assessment of the process and results. The transmission of this experience and learning process through this paper will improve the performance of committees of future conference venues, partners and participants and collaborators. The method for performing this evaluation is the assessment of the activities of both the scientific and organising committees of the XXVI Conference of the Spanish Society of Quality Healthcare in October 2008 in Zaragoza. The methodology evaluated the observance of the timetable and tasks assigned to the committees in the Congress Manual of the society along with the presentation of final results of the congress concerning scientific participation and overall satisfaction. There were a total of 1211 communications with a rejection rate of 9.1%. Of the total, 577 communications were presented in oral format and 544 in poster format. Aragon was the community of origin of 24% of communications. By subject areas, those of most interest were patient safety, organisational and management processes, and patient perspectives. A total of 83 participants attended 7 of the 11 workshops offered. The average attendance for each workshop was 12 people. The response rate to the assessment of workshops questionnaire was 54.2% with an average score of 4 (scale of 1 to 5). A total of 1131 people attended the conference of which 17% (193) were SECA associates. Out of a total of 1075 overall satisfaction conference questionnaires distributed there was a response rate of 9.30% (100). The scientific content was assessed with an average score of 3.6 and the organization with 3.87, both on a total score of 5 points. According to the number of abstracts received, number of conferences, level of satisfaction with the scientific program and organisation, we can conclude that the XXVI Conference of the Society has been a success, although we are still in our continuous quality improvement circle that will make conferences even better. Copyright © 2010 SECA. Published by Elsevier Espana. All rights reserved.

An outcome-based assessment process for accrediting computing programmes

NASA Astrophysics Data System (ADS)

Harmanani, Haidar M.

2017-11-01

The calls for accountability in higher education have made outcome-based assessment a key accreditation component. Accreditation remains a well-regarded seal of approval on college quality, and requires the programme to set clear, appropriate, and measurable goals and courses to attain them. Furthermore, programmes must demonstrate that responsibilities associated with the goals are being carried out. Assessment leaders face various challenges including process design and implementation, faculty buy-in, and resources availability. This paper presents an outcome-based assessment approach that facilitates faculty participation while simplifying the assessment and reporting processes through effective and meaningful visualisation. The proposed approach has been implemented and used for the successful ABET accreditation of a computer science programme, and can be easily adapted to any higher education programme.

System-level change in mental health services in North Wales: An observational study using systems thinking.

PubMed

Evans, S; Huxley, P J; Maxwell, N; Huxley, K L S

2014-06-01

To describe changes to mental health services using systems thinking. Structured standardized quality of life assessment (Manchester Short Quality of Life Assessment: MANSA) was used to establish service user priorities for changes to service provision (part of a process known as check in systems thinking). Current service performance in these priority areas was identified, and changes to service arrangements were planned, implemented and monitored by task and finish (T&F) groups (making use of a process known as flow in systems thinking). 81 MANSA assessments were completed at the check stage (by NM). Work finances and leisure activities emerged as service user priority areas for change, and T&F groups were established with representation of all sectors and service users. Ways to make improvements were observed, planned and implemented by T&F groups (the flow stage). The systems approach reveals how services and quality of life have been changed for patients in Wrexham. Further generalizable research is needed into the potential benefits of using systems thinking in mental health service evaluation. © The Author(s) 2013.

Quality metric for spherical panoramic video

NASA Astrophysics Data System (ADS)

Zakharchenko, Vladyslav; Choi, Kwang Pyo; Park, Jeong Hoon

2016-09-01

Virtual reality (VR)/ augmented reality (AR) applications allow users to view artificial content of a surrounding space simulating presence effect with a help of special applications or devices. Synthetic contents production is well known process form computer graphics domain and pipeline has been already fixed in the industry. However emerging multimedia formats for immersive entertainment applications such as free-viewpoint television (FTV) or spherical panoramic video require different approaches in content management and quality assessment. The international standardization on FTV has been promoted by MPEG. This paper is dedicated to discussion of immersive media distribution format and quality estimation process. Accuracy and reliability of the proposed objective quality estimation method had been verified with spherical panoramic images demonstrating good correlation results with subjective quality estimation held by a group of experts.

15 CFR 287.2 - Definitions. 1

Code of Federal Regulations, 2010 CFR

2010-01-01

... management of product, process or service quality and environmental performance. Sampling means the selection..., process, service, or person's qualifications conforms to specified requirements. Conformity assessment.... Requirements for products, services, systems, and organizations are those defined by law or regulation or by an...

Objective speech quality assessment and the RPE-LTP coding algorithm in different noise and language conditions.

PubMed

Hansen, J H; Nandkumar, S

1995-01-01

The formulation of reliable signal processing algorithms for speech coding and synthesis require the selection of a prior criterion of performance. Though coding efficiency (bits/second) or computational requirements can be used, a final performance measure must always include speech quality. In this paper, three objective speech quality measures are considered with respect to quality assessment for American English, noisy American English, and noise-free versions of seven languages. The purpose is to determine whether objective quality measures can be used to quantify changes in quality for a given voice coding method, with a known subjective performance level, as background noise or language conditions are changed. The speech coding algorithm chosen is regular-pulse excitation with long-term prediction (RPE-LTP), which has been chosen as the standard voice compression algorithm for the European Digital Mobile Radio system. Three areas are considered for objective quality assessment which include: (i) vocoder performance for American English in a noise-free environment, (ii) speech quality variation for three additive background noise sources, and (iii) noise-free performance for seven languages which include English, Japanese, Finnish, German, Hindi, Spanish, and French. It is suggested that although existing objective quality measures will never replace subjective testing, they can be a useful means of assessing changes in performance, identifying areas for improvement in algorithm design, and augmenting subjective quality tests for voice coding/compression algorithms in noise-free, noisy, and/or non-English applications.

Improving HIV outcomes in resource-limited countries: the importance of quality indicators.

PubMed

Ahonkhai, Aima A; Bassett, Ingrid V; Ferris, Timothy G; Freedberg, Kenneth A

2012-11-24

Resource-limited countries increasingly depend on quality indicators to improve outcomes within HIV treatment programs, but indicators of program performance suitable for use at the local program level remain underdeveloped. Using the existing literature as a guide, we applied standard quality improvement (QI) concepts to the continuum of HIV care from HIV diagnosis, to enrollment and retention in care, and highlighted critical service delivery process steps to identify opportunities for performance indicator development. We then identified existing indicators to measure program performance, citing examples used by pivotal donor agencies, and assessed their feasibility for use in surveying local program performance. Clinical delivery steps without existing performance measures were identified as opportunities for measure development. Using National Quality Forum (NQF) criteria as a guide, we developed measurement concepts suitable for use at the local program level that address existing gaps in program performance assessment. This analysis of the HIV continuum of care identified seven critical process steps providing numerous opportunities for performance measurement. Analysis of care delivery process steps and the application of NQF criteria identified 24 new measure concepts that are potentially useful for improving operational performance in HIV care at the local level. An evidence-based set of program-level quality indicators is critical for the improvement of HIV care in resource-limited settings. These performance indicators should be utilized as treatment programs continue to grow.

Instituting organizational learning for quality improvement through strategic planning nominal group processes.

PubMed

White, D B

2000-01-01

Healthcare managers are faced with unprecedented challenges as characterized by managed care constraints, downsizing, increased client needs, and a society demanding more responsive services. Managers must initiate change for quality, efficiency, and survival. This article provides information and strategies for (a) assessing the change readiness of an organization, (b) conducting an organizational diagnosis, (c) instituting a team culture, (d) developing a change strategy, (e) integrating the strategy with a quality improvement process, and (f) identifying the leadership skills to implement organization renewal. Nominal group processes, namely, SWOT and the Search Conference, are described, and case examples are provided. The implementation strategies have been used successfully in a variety of milieus; practical advice for success is described in detail.

Lean interventions in healthcare: do they actually work? A systematic literature review

PubMed Central

Moraros, John; Lemstra, Mark; Nwankwo, Chijioke

2016-01-01

Purpose Lean is a widely used quality improvement methodology initially developed and used in the automotive and manufacturing industries but recently expanded to the healthcare sector. This systematic literature review seeks to independently assess the effect of Lean or Lean interventions on worker and patient satisfaction, health and process outcomes, and financial costs. Data sources We conducted a systematic literature review of Medline, PubMed, Cochrane Library, CINAHL, Web of Science, ABI/Inform, ERIC, EMBASE and SCOPUS. Study selection Peer reviewed articles were included if they examined a Lean intervention and included quantitative data. Methodological quality was assessed using validated critical appraisal checklists. Publically available data collected by the Saskatchewan Health Quality Council and the Saskatchewan Union of Nurses were also analysed and reported separately. Data extraction Data on design, methods, interventions and key outcomes were extracted and collated. Results of data synthesis Our electronic search identified 22 articles that passed methodological quality review. Among the accepted studies, 4 were exclusively concerned with health outcomes, 3 included both health and process outcomes and 15 included process outcomes. Our study found that Lean interventions have: (i) no statistically significant association with patient satisfaction and health outcomes; (ii) a negative association with financial costs and worker satisfaction and (iii) potential, yet inconsistent, benefits on process outcomes like patient flow and safety. Conclusion While some may strongly believe that Lean interventions lead to quality improvements in healthcare, the evidence to date simply does not support this claim. More rigorous, higher quality and better conducted scientific research is required to definitively ascertain the impact and effectiveness of Lean in healthcare settings. PMID:26811118

Quality indicators for pharmaceutical care: a comprehensive set with national scores for Dutch community pharmacies.

PubMed

Teichert, Martina; Schoenmakers, Tim; Kylstra, Nico; Mosk, Berend; Bouvy, Marcel L; van de Vaart, Frans; De Smet, Peter A G M; Wensing, Michel

2016-08-01

Background The quality of pharmaceutical care in community pharmacies in the Netherlands has been assessed annually since 2008. The initial set has been further developed with pharmacists and patient organizations, the healthcare inspectorate, the government and health insurance companies. The set over 2012 was the first set of quality indicators for community pharmacies which was validated and supported by all major stakeholders. The aims of this study were to describe the validated set of quality indicators for community pharmacies and to report their scores over 2012. In subanalyses the score development over 5 years was described for those indicators, that have been surveyed before and remained unchanged. Methods Community pharmacists in the Netherlands were invited in 2013 to provide information for the set of 2012. Quality indicators were mapped by categories relevant for pharmaceutical care and defined for structures, processes and dispensing outcomes. Scores for categorically-measured quality indicators were presented as the percentage of pharmacies reporting the presence of a quality aspect. For numerical quality indicators, the mean of all reported scores was expressed. In subanalyses for those indicators that had been questioned previously, scores were collected from earlier measurements for pharmacies providing their scores in 2012. Multilevel analysis was used to assess the consistency of scores within one pharmacy over time by the intra-class correlation coefficient (ICC). Results For the set in 2012, 1739 Dutch community pharmacies (88 % of the total) provided information for 66 quality indicators in 10 categories. Indicator scores on the presence of quality structures showed relatively high quality levels. Scores for processes and dispensing outcomes were lower. Subanalyses showed that overall indicators scores improved within pharmacies, but this development differed between pharmacies. Conclusions A set of validated quality indicators provided insight into the quality of pharmaceutical care in the Netherlands. The quality of pharmaceutical care improved over time. As of 2012 quality structures were present in at least 80 % of the community pharmacies. Variation in scores on care processes and outcomes between individual pharmacies and over time can initiate future research to better understand and facilitate quality improvement in community pharmacies.

Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory; processing, taxonomy, and quality control of benthic macroinvertebrate samples

USGS Publications Warehouse

Moulton, Stephen R.; Carter, James L.; Grotheer, Scott A.; Cuffney, Thomas F.; Short, Terry M.

2000-01-01

Qualitative and quantitative methods to process benthic macroinvertebrate (BMI) samples have been developed and tested by the U.S. Geological Survey?s National Water Quality Laboratory Biological Group. The qualitative processing method is based on visually sorting a sample for up to 2 hours. Sorting focuses on attaining organisms that are likely to result in taxonomic identifications to lower taxonomic levels (for example, Genus or Species). Immature and damaged organisms are also sorted when they are likely to result in unique determinations. The sorted sample remnant is scanned briefly by a second person to determine if obvious taxa were missed. The quantitative processing method is based on a fixed-count approach that targets some minimum count, such as 100 or 300 organisms. Organisms are sorted from randomly selected 5.1- by 5.1-centimeter parts of a gridded subsampling frame. The sorted remnant from each sample is resorted by a second individual for at least 10 percent of the original sort time. A large-rare organism search is performed on the unsorted remnant to sort BMI taxa that were not likely represented in the sorted grids. After either qualitatively or quantitatively sorting the sample, BMIs are identified by using one of three different types of taxonomic assessment. The Standard Taxonomic Assessment is comparable to the U.S. Environmental Protection Agency Rapid Bioassessment Protocol III and typically provides Genus- or Species-level taxonomic resolution. The Rapid Taxonomic Assessment is comparable to the U.S. Environmental Protection Agency Rapid Bioassessment Protocol II and provides Familylevel and higher taxonomic resolution. The Custom Taxonomic Assessment provides Species-level resolution whenever possible for groups identified to higher taxonomic levels by using the Standard Taxonomic Assessment. The consistent use of standardized designations and notes facilitates the interpretation of BMI data within and among water-quality studies. Taxonomic identifications are quality assured by verifying all referenced taxa and randomly reviewing 10 percent of the taxonomic identifications performed weekly by Biological Group taxonomists. Taxonomic errors discovered during this review are corrected. BMI data are reviewed for accuracy and completeness prior to release. BMI data are released phylogenetically in spreadsheet format and unprocessed abundances are corrected for laboratory and field subsampling when necessary.

Quality of antenatal care and client satisfaction in Kenya and Namibia.

PubMed

Do, Mai; Wang, Wenjuan; Hembling, John; Ametepi, Paul

2017-04-01

Despite much progress in maternal health service coverage, the quality of care has not seen parallel improvement. This study assessed the quality of antenatal care (ANC), an entry point to the health system for many women. The study used data from recent Service Provision Assessment (SPA) surveys of nationally representative health facilities in Kenya and Namibia. Kenya and Namibia represent the situation in much of sub-Saharan Africa, where ANC is relatively common but maternal mortality remains high. The SPA comprised an inventory of health facilities that provided ANC, interviews with ANC providers and clients, and observations of service delivery. Not applicable. Quality was measured in terms of structure and process of service provision, and client satisfaction as the outcome of service provision. Wide variations in structural and process attributes of quality of care existed in both Kenya and Namibia; however, better structural quality did not translate to better service delivery process or greater client satisfaction. Long waiting time was a common problem and was generally more serious in hospitals and health centers than in clinics and smaller facilities; it was consistently associated with lower client satisfaction. The study also indicates that the provider's technical preparedness may not be sufficient to provide good-quality services and to ensure client satisfaction. Findings highlight important program implications, including improving ANC services and promoting their use at health clinics and lower-level facilities, and ensuring that available supplies and equipment are used for service provision. © The Author 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

ATACseqQC: a Bioconductor package for post-alignment quality assessment of ATAC-seq data.

PubMed

Ou, Jianhong; Liu, Haibo; Yu, Jun; Kelliher, Michelle A; Castilla, Lucio H; Lawson, Nathan D; Zhu, Lihua Julie

2018-03-01

ATAC-seq (Assays for Transposase-Accessible Chromatin using sequencing) is a recently developed technique for genome-wide analysis of chromatin accessibility. Compared to earlier methods for assaying chromatin accessibility, ATAC-seq is faster and easier to perform, does not require cross-linking, has higher signal to noise ratio, and can be performed on small cell numbers. However, to ensure a successful ATAC-seq experiment, step-by-step quality assurance processes, including both wet lab quality control and in silico quality assessment, are essential. While several tools have been developed or adopted for assessing read quality, identifying nucleosome occupancy and accessible regions from ATAC-seq data, none of the tools provide a comprehensive set of functionalities for preprocessing and quality assessment of aligned ATAC-seq datasets. We have developed a Bioconductor package, ATACseqQC, for easily generating various diagnostic plots to help researchers quickly assess the quality of their ATAC-seq data. In addition, this package contains functions to preprocess aligned ATAC-seq data for subsequent peak calling. Here we demonstrate the utilities of our package using 25 publicly available ATAC-seq datasets from four studies. We also provide guidelines on what the diagnostic plots should look like for an ideal ATAC-seq dataset. This software package has been used successfully for preprocessing and assessing several in-house and public ATAC-seq datasets. Diagnostic plots generated by this package will facilitate the quality assessment of ATAC-seq data, and help researchers to evaluate their own ATAC-seq experiments as well as select high-quality ATAC-seq datasets from public repositories such as GEO to avoid generating hypotheses or drawing conclusions from low-quality ATAC-seq experiments. The software, source code, and documentation are freely available as a Bioconductor package at https://bioconductor.org/packages/release/bioc/html/ATACseqQC.html .

Technical Potential Assessment for the Renewable Energy Zone (REZ) Process: A GIS-Based Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Nathan; Roberts, Billy J

Geographic Information Systems (GIS)-based energy resource and technical potential assessments identify areas capable of supporting high levels of renewable energy (RE) development as part of a Renewable Energy Zone (REZ) Transmission Planning process. This document expands on the REZ Process to aid practitioners in conducting GIS-based RE resource and technical potential assessments. The REZ process is an approach to plan, approve, and build transmission infrastructure that connects REZs - geographic areas that have high-quality RE resources, suitable topography and land-use designations, and demonstrated developer interest - to the power system. The REZ process helps to increase the share of solarmore » photovoltaic (PV), wind, and other resources while also maintaining reliability and economics.« less

Identification of optimal mask size parameter for noise filtering in 99mTc-methylene diphosphonate bone scintigraphy images.

PubMed

Pandey, Anil K; Bisht, Chandan S; Sharma, Param D; ArunRaj, Sreedharan Thankarajan; Taywade, Sameer; Patel, Chetan; Bal, Chandrashekhar; Kumar, Rakesh

2017-11-01

Tc-methylene diphosphonate (Tc-MDP) bone scintigraphy images have limited number of counts per pixel. A noise filtering method based on local statistics of the image produces better results than a linear filter. However, the mask size has a significant effect on image quality. In this study, we have identified the optimal mask size that yields a good smooth bone scan image. Forty four bone scan images were processed using mask sizes 3, 5, 7, 9, 11, 13, and 15 pixels. The input and processed images were reviewed in two steps. In the first step, the images were inspected and the mask sizes that produced images with significant loss of clinical details in comparison with the input image were excluded. In the second step, the image quality of the 40 sets of images (each set had input image, and its corresponding three processed images with 3, 5, and 7-pixel masks) was assessed by two nuclear medicine physicians. They selected one good smooth image from each set of images. The image quality was also assessed quantitatively with a line profile. Fisher's exact test was used to find statistically significant differences in image quality processed with 5 and 7-pixel mask at a 5% cut-off. A statistically significant difference was found between the image quality processed with 5 and 7-pixel mask at P=0.00528. The identified optimal mask size to produce a good smooth image was found to be 7 pixels. The best mask size for the John-Sen Lee filter was found to be 7×7 pixels, which yielded Tc-methylene diphosphonate bone scan images with the highest acceptable smoothness.

The experience factory: Can it make you a 5? or what is its relationship to other quality and improvement concepts?

NASA Technical Reports Server (NTRS)

Basili, Victor R.

1992-01-01

The concepts of quality improvements have permeated many businesses. It is clear that the nineties will be the quality era for software and there is a growing need to develop or adapt quality improvement approaches to the software business. Thus we must understand software as an artifact and software as a business. Since the business we are dealing with is software, we must understand the nature of software and software development. The software discipline is evolutionary and experimental; it is a laboratory science. Software is development not production. The technologies of the discipline are human based. There is a lack of models that allow us to reason about the process and the product. All software is not the same; process is a variable, goals are variable, etc. Packaged, reusable, experiences require additional resources in the form of organization, processes, people, etc. There have been a variety of organizational frameworks proposed to improve quality for various businesses. The ones discussed in this presentation include: Plan-Do-Check-Act, a quality improvement process based upon a feedback cycle for optimizing a single process model/production line; the Experience Factory/Quality Improvement Paradigm, continuous improvements through the experimentation, packaging, and reuse of experiences based upon a business's needs; Total Quality Management, a management approach to long term success through customer satisfaction based on the participation of all members of an organization; the SEI capability maturity model, a staged process improvement based upon assessment with regard to a set of key process areas until you reach a level 5 which represents a continuous process improvement; and Lean (software) Development, a principle supporting the concentration of the production on 'value added' activities and the elimination of reduction of 'not value added' activities.