Science.gov

Sample records for quality assurance based

  1. Quality Assurance.

    ERIC Educational Resources Information Center

    Massachusetts Career Development Inst., Springfield.

    This booklet is one of six texts from a workplace literacy curriculum designed to assist learners in facing the increased demands of the workplace. The booklet contains five sections that cover the following topics: (1) importance of reliability; (2) meaning of quality assurance; (3) historical development of quality assurance; (4) statistical…

  2. Quality assurance

    SciTech Connect

    Gillespie, B.M.; Gleckler, B.P.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report summarizes the quality assurance and quality control practices of Hanford Site environmental monitoring and surveillance programs. Samples are analyzed according to documented standard analytical procedures. This section discusses specific measures taken to ensure quality in project management, sample collection, and analytical results.

  3. Assuring quality.

    PubMed

    Eaton, K A; Reynolds, P A; Mason, R; Cardell, R

    2008-08-09

    All those involved in education have a strong motivation to ensure that all its aspects, including content and teaching practice, are of the highest standard. This paper describes how agencies such as the Quality Assurance Agency for Higher Education (QAA) and the General Dental Council (GDC) have established frameworks and specifications to monitor the quality of education provided in dental schools and other institutes that provide education and training for dentists and dental care professionals (DCPs). It then considers quality issues in programme and course development, techniques for assessing the quality of education, including content and presentation, and the role of students. It goes on to review the work that has been done in developing quality assessment for distance learning in dentistry. It concludes that, to date, much of the work on quality applies to education as a whole and that the assessment of the quality of e-learning in dentistry is in its infancy.

  4. Quality assurance of metabolomics.

    PubMed

    Bouhifd, Mounir; Beger, Richard; Flynn, Thomas; Guo, Lining; Harris, Georgina; Hogberg, Helena; Kaddurah-Daouk, Rima; Kamp, Hennicke; Kleensang, Andre; Maertens, Alexandra; Odwin-DaCosta, Shelly; Pamies, David; Robertson, Donald; Smirnova, Lena; Sun, Jinchun; Zhao, Liang; Hartung, Thomas

    2015-01-01

    Metabolomics promises a holistic phenotypic characterization of biological responses to toxicants. This technology is based on advanced chemical analytical tools with reasonable throughput, including mass-spectroscopy and NMR. Quality assurance, however - from experimental design, sample preparation, metabolite identification, to bioinformatics data-mining - is urgently needed to assure both quality of metabolomics data and reproducibility of biological models. In contrast to microarray-based transcriptomics, where consensus on quality assurance and reporting standards has been fostered over the last two decades, quality assurance of metabolomics is only now emerging. Regulatory use in safety sciences, and even proper scientific use of these technologies, demand quality assurance. In an effort to promote this discussion, an expert workshop discussed the quality assurance needs of metabolomics. The goals for this workshop were 1) to consider the challenges associated with metabolomics as an emerging science, with an emphasis on its application in toxicology and 2) to identify the key issues to be addressed in order to establish and implement quality assurance procedures in metabolomics-based toxicology. Consensus has still to be achieved regarding best practices to make sure sound, useful, and relevant information is derived from these new tools.

  5. Multinational Quality Assurance

    ERIC Educational Resources Information Center

    Kinser, Kevin

    2011-01-01

    Multinational colleges and universities pose numerous challenges to the traditional models of quality assurance that are designed to validate domestic higher education. When institutions cross international borders, at least two quality assurance protocols are involved. To guard against fraud and abuse, quality assurance in the host country is…

  6. [Quality assurance based on civil and penal law].

    PubMed

    Bock, R W

    1998-01-01

    The term "quality assurance" primarily concerns the provisions of professional regulations and law relating to health service physicians. It would be too sweeping to regard liability or criminal law as normative parameters for guaranteeing quality assurance in the narrower sense. Nevertheless, along with expert opinions sought within the context of relevant lawsuits, court rulings under civil law and criminal law in effect constitute an indirect form of "quality control". As a consequence, many court decisions act as a standard for the future. Civil law is concerned with determining whether the patient has received the quality of medical service to which he is entitled; for all intents and purposes, the same applies to the judgement of medical treatment under criminal law, whereby all cases, whether civil or criminal, concern diagnostic and therapeutic practice in specific treatment situations, the organisation of treatment and the provision of information. With regard to these areas, a contribution can therefore be made to quality assurance by observing pertinent civil and criminal judicature.

  7. RAVEN Quality Assurance Activities

    SciTech Connect

    Cogliati, Joshua Joseph

    2015-09-01

    This report discusses the quality assurance activities needed to raise the Quality Level of Risk Analysis in a Virtual Environment (RAVEN) from Quality Level 3 to Quality Level 2. This report also describes the general RAVEN quality assurance activities. For improving the quality, reviews of code changes have been instituted, more parts of testing have been automated, and improved packaging has been created. For upgrading the quality level, requirements have been created and the workflow has been improved.

  8. Software quality assurance handbook

    SciTech Connect

    Not Available

    1990-09-01

    There are two important reasons for Software Quality Assurance (SQA) at Allied-Signal Inc., Kansas City Division (KCD): First, the benefits from SQA make good business sense. Second, the Department of Energy has requested SQA. This handbook is one of the first steps in a plant-wide implementation of Software Quality Assurance at KCD. The handbook has two main purposes. The first is to provide information that you will need to perform software quality assurance activities. The second is to provide a common thread to unify the approach to SQA at KCD. 2 figs.

  9. Reasoning Based Quality Assurance of Medical Ontologies: A Case Study

    PubMed Central

    Horridge, Matthew; Parsia, Bijan; Noy, Natalya F.; Musenm, Mark A.

    2014-01-01

    The World Health Organisation is using OWL as a key technology to develop ICD-11 – the next version of the well-known International Classification of Diseases. Besides providing better opportunities for data integration and linkages to other well-known ontologies such as SNOMED-CT, one of the main promises of using OWL is that it will enable various forms of automated error checking. In this paper we investigate how automated OWL reasoning, along with a Justification Finding Service can be used as a Quality Assurance technique for the development of large and complex ontologies such as ICD-11. Using the International Classification of Traditional Medicine (ICTM) – Chapter 24 of ICD-11 – as a case study, and an expert panel of knowledge engineers, we reveal the kinds of problems that can occur, how they can be detected, and how they can be fixed. Specifically, we found that a logically inconsistent version of the ICTM ontology could be repaired using justifications (minimal entailing subsets of an ontology). Although over 600 justifications for the inconsistency were initially computed, we found that there were three main manageable patterns or categories of justifications involving TBox and ABox axioms. These categories represented meaningful domain errors to an expert panel of ICTM project knowledge engineers, who were able to use them to successfully determine the axioms that needed to be revised in order to fix the problem. All members of the expert panel agreed that the approach was useful for debugging and ensuring the quality of ICTM. PMID:25954373

  10. Quality Assurance for All

    ERIC Educational Resources Information Center

    Cheung, Peter P. T.; Tsui, Cecilia B. S.

    2010-01-01

    For higher education reform, most decision-makers aspire to achieving a higher participation rate and a respectable degree of excellence with diversity at the same time. But very few know exactly how. External quality assurance is a fair basis for differentiation but there can be doubt and resistance in some quarters. Stakeholder interests differ…

  11. The Evidence for a Risk-Based Approach to Australian Higher Education Regulation and Quality Assurance

    ERIC Educational Resources Information Center

    Edwards, Fleur

    2012-01-01

    This paper explores the nascent field of risk management in higher education, which is of particular relevance in Australia currently, as the Commonwealth Government implements its plans for a risk-based approach to higher education regulation and quality assurance. The literature outlines the concept of risk management and risk-based approaches…

  12. The simcyp population based simulator: architecture, implementation, and quality assurance.

    PubMed

    Jamei, Masoud; Marciniak, Steve; Edwards, Duncan; Wragg, Kris; Feng, Kairui; Barnett, Adrian; Rostami-Hodjegan, Amin

    2013-01-01

    Developing a user-friendly platform that can handle a vast number of complex physiologically based pharmacokinetic and pharmacodynamic (PBPK/PD) models both for conventional small molecules and larger biologic drugs is a substantial challenge. Over the last decade the Simcyp Population Based Simulator has gained popularity in major pharmaceutical companies (70% of top 40 - in term of R&D spending). Under the Simcyp Consortium guidance, it has evolved from a simple drug-drug interaction tool to a sophisticated and comprehensive Model Based Drug Development (MBDD) platform that covers a broad range of applications spanning from early drug discovery to late drug development. This article provides an update on the latest architectural and implementation developments within the Simulator. Interconnection between peripheral modules, the dynamic model building process and compound and population data handling are all described. The Simcyp Data Management (SDM) system, which contains the system and drug databases, can help with implementing quality standards by seamless integration and tracking of any changes. This also helps with internal approval procedures, validation and auto-testing of the new implemented models and algorithms, an area of high interest to regulatory bodies.

  13. Software Quality Assurance Metrics

    NASA Technical Reports Server (NTRS)

    McRae, Kalindra A.

    2004-01-01

    Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

  14. [Medical quality assurance today].

    PubMed

    Schäfer, Robert D

    2008-01-01

    Both the quality and performance of health systems are strongly influenced by the number and the qualification of the professional staff. Quality assurance programs help to analyse causalities which are responsible for medical malpractice. On the basis of the experiences gained by the performance of established Quality Assurance Programs (QAP) in the North Rhine area since 1982 various aspects of the efficiency of these programs will be discussed. The implementation of legal regulations making these programs mandatory is criticised not only for its bureaucratic effect but also for the attempt to exclude professional experts from the interpretation of results. It is recommended to liberalize these regulations in order to facilitate improvement of methods and participation of the medical profession.

  15. Quality Assurance for University Teaching.

    ERIC Educational Resources Information Center

    Ellis, Roger, Ed.

    This book, written from a British perspective, presents 17 papers on quality assurance in teaching at the university level. The first eight papers address issues of assuring quality and include: (1) "Quality Assurance for University Teaching; Issues and Approaches" (Roger Ellis); (2) "A British Standard for University…

  16. Quality Assurance in Nursing Homes.

    ERIC Educational Resources Information Center

    Balgopal, Pallassana R.; And Others

    This manual, developed for the nursing home employee, examines the concept of quality assurance in nursing homes, describes the benefits of an effective quality assurance program, and provides guidelines to aid nursing homes in developing an appropriate quality assurance program. After a brief introduction, a working definition of quality…

  17. The quality assurance liaison: Combined technical and quality assurance support

    NASA Astrophysics Data System (ADS)

    Bolivar, S. L.; Day, J. L.

    1993-03-01

    The role of the quality assurance liaison, the responsibilities of this position, and the evolutionary changes in duties over the last six years are described. The role of the quality assurance liaison has had a very positive impact on the Los Alamos Yucca Mountain Site Characterization (YW) quality assurance program. Having both technical and quality assurance expertise, the quality assurance liaisons are able to facilitate communications with scientists on quality assurance issues and requirements, thereby generating greater productivity in scientific investigations. The quality assurance liaisons help ensure that the scientific community knows and implements existing requirements, is aware of new or changing regulations, and is able to conduct scientific work within Project requirements. The influence of the role of the quality assurance liaison can be measured by an overall improvement in attitude of the staff regarding quality assurance requirements and improved job performance, as well as a decrease in deficiencies identified during both internal and external audits and surveillances. This has resulted in a more effective implementation of quality assurance requirements.

  18. Advanced Fuel Quality Assurance Standards Based on Thermal Testing and Chemometric Modeling

    DTIC Science & Technology

    2015-10-05

    Briefing Charts 3. DATES COVERED (From - To) 15 September 2015 - 05 October 2015 4. TITLE AND SUBTITLE Advanced Fuel Quality Assurance Standards Based...ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION REPORT NO. Air Force Research Laboratory (AFMC) AFRL/RQRC 10 E. Saturn Blvd. Edwards AFB...CA 93524-7680 9. SPONSORING / MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S) Air Force Research Laboratory

  19. Feasibility study of proton-based quality assurance of proton range compensator

    NASA Astrophysics Data System (ADS)

    Park, S.; Jeong, C.; Min, B. J.; Kwak, J.; Lee, J.; Cho, S.; Shin, D.; Lim, Y. K.; Park, S. Y.; Lee, S. B.

    2013-06-01

    All patient specific range compensators (RCs) are customized for achieving distal dose conformity of target volume in passively scattered proton therapy. Compensators are milled precisely using a computerized machine. In proton therapy, precision of the compensator is critical and quality assurance (QA) is required to protect normal tissues and organs from radiation damage. This study aims to evaluate the precision of proton-based quality assurance of range compensator. First, the geometry information of two compensators was extracted from the DICOM Radiotherapy (RT) plan. Next, RCs were irradiated on the EBT film individually by proton beam which is modulated to have a photon-like percent depth dose (PDD). Step phantoms were also irradiated on the EBT film to generate calibration curve which indicates relationship between optical density of irradiated film and perpendicular depth of compensator. Comparisons were made using the mean absolute difference (MAD) between coordinate information from DICOM RT and converted depth information from the EBT film. MAD over the whole region was 1.7, and 2.0 mm. However, MAD over the relatively flat regions on each compensator selected for comparison was within 1 mm. These results shows that proton-based quality assurance of range compensator is feasible and it is expected to achieve MAD over the whole region less than 1 mm with further correction about scattering effect of proton imaging.

  20. Quality Assurance [for Persons with Developmental Disabilities].

    ERIC Educational Resources Information Center

    Lakin, Charlie, Ed.; And Others

    1993-01-01

    This newsletter feature issue focuses on quality assurance and innovative efforts to enhance service quality for persons with developmental disabilities. Individual articles include: "Redesigning Quality Assurance" (Clarence J. Sundram); "Quality Assurance, Quality Enhancement" (Charlie Lakin et al.); "Challenging…

  1. Construction quality assurance report

    SciTech Connect

    Roscha, V.

    1994-09-08

    This report provides a summary of the construction quality assurance (CQA) observation and test results, including: The results of the geosynthetic and soil materials conformance testing. The observation and testing results associates with the installation of the soil liners. The observation and testing results associated with the installation of the HDPE geomembrane liner systems. The observation and testing results associated with the installation of the leachate collection and removal systems. The observation and testing results associated with the installation of the working surfaces. The observation and testing results associated with in-plant manufacturing process. Summary of submittal reviews by Golder Construction Services, Inc. The submittal and certification of the piping material specifications. The observation and verification associated of the Acceptance Test Procedure results of the operational equipment functions. Summary of the ECNs which are incorporated into the project.

  2. 48 CFR 37.604 - Quality assurance surveillance plans.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Quality assurance... SPECIAL CATEGORIES OF CONTRACTING SERVICE CONTRACTING Performance-Based Acquisition 37.604 Quality assurance surveillance plans. Requirements for quality assurance and quality assurance surveillance...

  3. HPCMP CREATE (trademark)-AV Quality Assurance: Best Practices for Validating and Supporting Computation-Based Engineering Software

    DTIC Science & Technology

    2015-09-30

    30/2015 Oct 2008-Sep 2015 HPCMP CREATE™-AV Quality Assurance: Best Practices for Validating and Supporting Computation-Based Engineering Software...2) “Does this tool adequately perform any and all advertised capabilities?” This paper will describe how the HPCMP CREATE Air Vehicles (AV...project ensures positive answers to these questions through the functions performed by the Quality Assurance group. Industry quality standards will be

  4. Recent Trends in Quality Assurance

    ERIC Educational Resources Information Center

    Amaral, Alberto; Rosa, Maria Joao

    2010-01-01

    In this paper we present a brief description of the evolution of quality assurance in Europe, paying particular attention to its relationship to the rising loss of trust in higher education institutions. We finalise by analysing the role of the European Commission in the setting up of new quality assurance mechanisms that tend to promote…

  5. Software Quality Assurance Audits Guidebooks

    NASA Technical Reports Server (NTRS)

    1990-01-01

    The growth in cost and importance of software to NASA has caused NASA to address the improvement of software development across the agency. One of the products of this program is a series of guidebooks that define a NASA concept of the assurance processes that are used in software development. The Software Assurance Guidebook, NASA-GB-A201, issued in September, 1989, provides an overall picture of the NASA concepts and practices in software assurance. Second level guidebooks focus on specific activities that fall within the software assurance discipline, and provide more detailed information for the manager and/or practitioner. This is the second level Software Quality Assurance Audits Guidebook that describes software quality assurance audits in a way that is compatible with practices at NASA Centers.

  6. Modernization of software quality assurance

    NASA Technical Reports Server (NTRS)

    Bhaumik, Gokul

    1988-01-01

    The customers satisfaction depends not only on functional performance, it also depends on the quality characteristics of the software products. An examination of this quality aspect of software products will provide a clear, well defined framework for quality assurance functions, which improve the life-cycle activities of software development. Software developers must be aware of the following aspects which have been expressed by many quality experts: quality cannot be added on; the level of quality built into a program is a function of the quality attributes employed during the development process; and finally, quality must be managed. These concepts have guided our development of the following definition for a Software Quality Assurance function: Software Quality Assurance is a formal, planned approach of actions designed to evaluate the degree of an identifiable set of quality attributes present in all software systems and their products. This paper is an explanation of how this definition was developed and how it is used.

  7. Developing a Quality Assurance System for Multiple Evidence Based Practices in a Statewide Service Improvement Initiative.

    PubMed

    Sedlar, Georganna; Bruns, Eric J; Walker, Sarah C; Kerns, Suzanne E U; Negrete, Andrea

    2017-01-01

    Efforts to implement evidence based practices (EBP) are increasingly common in child-serving systems. However, public systems undertaking comprehensive improvement efforts that aim to increase availability of multiple practices at the same time may struggle to build comprehensive and user-friendly strategies to develop the workforce and encourage adoption, faithful implementation, and sustainability of selected EBPs. Given that research shows model adherence predicts positive outcomes, one critical EBP implementation support is systematic quality, fidelity, and compliance monitoring. This paper describes the development and initial implementation of a quality assurance framework for a statewide EBP initiative within child welfare. This initiative aimed to improve provider practice and monitor provider competence and compliance across four different EBPs, and to inform funding and policy decisions. The paper presents preliminary data as an illustration of lessons learned during the quality monitoring process and concludes with a discussion of the promise and challenges of developing and applying a multi-EBP quality assurance framework for use in public systems.

  8. [Practice report: the process-based indicator dashboard. Visualising quality assurance results in standardised processes].

    PubMed

    Petzold, Thomas; Hertzschuch, Diana; Elchlep, Frank; Eberlein-Gonska, Maria

    2014-01-01

    Process management (PM) is a valuable method for the systematic analysis and structural optimisation of the quality and safety of clinical treatment. PM requires a high motivation and willingness to implement changes of both employees and management. Definition of quality indicators is required to systematically measure the quality of the specified processes. One way to represent comparable quality results is the use of quality indicators of the external quality assurance in accordance with Sect. 137 SGB V—a method which the Federal Joint Committee (GBA) and the institutions commissioned by the GBA have employed and consistently enhanced for more than ten years. Information on the quality of inpatient treatment is available for 30 defined subjects throughout Germany. The combination of specified processes with quality indicators is beneficial for the information of employees. A process-based indicator dashboard provides essential information about the treatment process. These can be used for process analysis. In a continuous consideration of these indicator results values can be determined and errors will be remedied quickly. If due consideration is given to these indicators, they can be used for benchmarking to identify potential process improvements.

  9. BUILDING "BRIDGES" WITH QUALITY ASSURANCE

    EPA Science Inventory

    The papr describes how, rather than building "bridges" across centuries, quality assurance (QA) personnel have the opportunity to build bridges across technical disciplines, between public and private organizations, and between different QA groups. As reviewers and auditors of a...

  10. Quality Assurance of Multiport Image-Guided Minimally Invasive Surgery at the Lateral Skull Base

    PubMed Central

    Nau-Hermes, Maria; Schmitt, Robert; Becker, Meike; El-Hakimi, Wissam; Hansen, Stefan; Klenzner, Thomas; Schipper, Jörg

    2014-01-01

    For multiport image-guided minimally invasive surgery at the lateral skull base a quality management is necessary to avoid the damage of closely spaced critical neurovascular structures. So far there is no standardized method applicable independently from the surgery. Therefore, we adapt a quality management method, the quality gates (QG), which is well established in, for example, the automotive industry and apply it to multiport image-guided minimally invasive surgery. QG divide a process into different sections. Passing between sections can only be achieved if previously defined requirements are fulfilled which secures the process chain. An interdisciplinary team of otosurgeons, computer scientists, and engineers has worked together to define the quality gates and the corresponding criteria that need to be fulfilled before passing each quality gate. In order to evaluate the defined QG and their criteria, the new surgery method was applied with a first prototype at a human skull cadaver model. We show that the QG method can ensure a safe multiport minimally invasive surgical process at the lateral skull base. Therewith, we present an approach towards the standardization of quality assurance of surgical processes. PMID:25105146

  11. Redefining and expanding quality assurance.

    PubMed

    Robins, J L

    1992-12-01

    To meet the current standards of excellence necessary for blood establishments, we have learned from industry that a movement toward organization-wide quality assurance/total quality management must be made. Everyone in the organization must accept responsibility for participating in providing the highest quality products and services. Quality must be built into processes and design systems to support these quality processes. Quality assurance has been redefined to include a quality planning function described as the most effective way of designing quality into processes. A formalized quality planning process must be part of quality assurance. Continuous quality improvement has been identified as the strategy every blood establishment must support while striving for error-free processing as the long-term objective. The auditing process has been realigned to support and facilitate this same objective. Implementing organization-wide quality assurance/total quality management is one proven plan for guaranteeing the quality of the 20 million products that are transfused into 4 million patients each year and for moving toward the new order.

  12. Quality Assurance: Patient Chart Reviews

    NASA Astrophysics Data System (ADS)

    Oginni, B. M.; Odero, D. O.

    2009-07-01

    Recent developments in radiation therapy have immensely impacted the way the radiation dose is delivered to patients undergoing radiation treatments. However, the fundamental quality assurance (QA) issues underlying the radiation therapy still remain the accuracy of the radiation dose and the radiation safety. One of the major duties of clinical medical physicists in the radiation therapy departments still revolves around ensuring the accuracy of dose delivery to the planning target volume (PTV), the reduction of unintended radiation to normal organs and minimization of the radiation exposure to the medical personnel based on ALARA (as low as reasonably achievable) principle. Many of the errors in radiation therapy can be minimized through a comprehensive program of periodic checks. One of the QA procedures on the patient comes in the form of chart reviews which could be in either electronic or paper-based format. We present the quality assurance procedures that have to be performed on the patient records from the beginning and periodically to the end of the treatment, based on the guidelines from the American Association of Physicists in Medicine (AAPM) and American College of Physicians (ACP).

  13. Quality assurance for gamma knives

    SciTech Connect

    Jones, E.D.; Banks, W.W.; Fischer, L.E.

    1995-09-01

    This report describes and summarizes the results of a quality assurance (QA) study of the Gamma Knife, a nuclear medical device used for the gamma irradiation of intracranial lesions. Focus was on the physical aspects of QA and did not address issues that are essentially medical, such as patient selection or prescription of dose. A risk-based QA assessment approach was used. Sample programs for quality control and assurance are included. The use of the Gamma Knife was found to conform to existing standards and guidelines concerning radiation safety and quality control of external beam therapies (shielding, safety reviews, radiation surveys, interlock systems, exposure monitoring, good medical physics practices, etc.) and to be compliant with NRC teletherapy regulations. There are, however, current practices for the Gamma Knife not covered by existing, formalized regulations, standards, or guidelines. These practices have been adopted by Gamma Knife users and continue to be developed with further experience. Some of these have appeared in publications or presentations and are slowly finding their way into recommendations of professional organizations.

  14. 40 CFR 51.363 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 2 2013-07-01 2013-07-01 false Quality assurance. 51.363 Section 51... Requirements § 51.363 Quality assurance. An ongoing quality assurance program shall be implemented to discover... impede program performance. The quality assurance and quality control procedures shall be...

  15. 40 CFR 51.363 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 2 2011-07-01 2011-07-01 false Quality assurance. 51.363 Section 51... Requirements § 51.363 Quality assurance. An ongoing quality assurance program shall be implemented to discover... impede program performance. The quality assurance and quality control procedures shall be...

  16. Quality assurance consideration for cement-based grout technology programs at Oak Ridge National Laboratory

    SciTech Connect

    McDaniel, E.W.; Tallent, O.K.; Sams, T.L.; Delzer, D.B.

    1987-01-01

    Oak Ridge National Laboratory has developed and is continuing to refine a method of immobilizing low-level radioactive liquid wastes by mixing them with cementitious dry-solid blends. A quality assurance program is vital to the project because Nuclear Regulatory Commission (NRC), Environmental Protection Agency (EPA) and state environmental regulations must be demonstrably met (the work must be defensible in a court of law). The end result of quality assurance (QA) is, by definition, a product of demonstrable quality. In the laboratory, this entails traceability, repeatability, and credibility. This paper describes the application of QA in grout technology development at Oak Ridge National Laboratory.

  17. Quality assurance needs for modern image-based radiotherapy: recommendations from 2007 interorganizational symposium on "quality assurance of radiation therapy: challenges of advanced technology".

    PubMed

    Williamson, Jeffrey F; Dunscombe, Peter B; Sharpe, Michael B; Thomadsen, Bruce R; Purdy, James A; Deye, James A

    2008-01-01

    This report summarizes the consensus findings and recommendations emerging from 2007 Symposium, "Quality Assurance of Radiation Therapy: Challenges of Advanced Technology." The Symposium was held in Dallas February 20-22, 2007. The 3-day program, which was sponsored jointly by the American Society for Therapeutic Radiology and Oncology (ASTRO), American Association of Physicists in Medicine (AAPM), and National Cancer Institute (NCI), included >40 invited speakers from the radiation oncology and industrial engineering/human factor communities and attracted nearly 350 attendees, mostly medical physicists. A summary of the major findings follows. The current process of developing consensus recommendations for prescriptive quality assurance (QA) tests remains valid for many of the devices and software systems used in modern radiotherapy (RT), although for some technologies, QA guidance is incomplete or out of date. The current approach to QA does not seem feasible for image-based planning, image-guided therapies, or computer-controlled therapy. In these areas, additional scientific investigation and innovative approaches are needed to manage risk and mitigate errors, including a better balance between mitigating the risk of catastrophic error and maintaining treatment quality, complimenting the current device-centered QA perspective by a more process-centered approach, and broadening community participation in QA guidance formulation and implementation. Industrial engineers and human factor experts can make significant contributions toward advancing a broader, more process-oriented, risk-based formulation of RT QA. Healthcare administrators need to appropriately increase personnel and ancillary equipment resources, as well as capital resources, when new advanced technology RT modalities are implemented. The pace of formalizing clinical physics training must rapidly increase to provide an adequately trained physics workforce for advanced technology RT. The specific

  18. SU-E-T-186: Cloud-Based Quality Assurance Application for Linear Accelerator Commissioning

    SciTech Connect

    Rogers, J

    2015-06-15

    Purpose: To identify anomalies and safety issues during data collection and modeling for treatment planning systems Methods: A cloud-based quality assurance system (AQUIRE - Automated QUalIty REassurance) has been developed to allow the uploading and analysis of beam data aquired during the treatment planning system commissioning process. In addition to comparing and aggregating measured data, tools have also been developed to extract dose from the treatment planning system for end-to-end testing. A gamma index is perfomed on the data to give a dose difference and distance-to-agreement for validation that a beam model is generating plans consistent with the beam data collection. Results: Over 20 linear accelerators have been commissioning using this platform, and a variety of errors and potential saftey issues have been caught through the validation process. For example, the gamma index of 2% dose, 2mm DTA is quite sufficient to see curves not corrected for effective point of measurement. Also, data imported into the database is analyzed against an aggregate of similar linear accelerators to show data points that are outliers. The resulting curves in the database exhibit a very small standard deviation and imply that a preconfigured beam model based on aggregated linear accelerators will be sufficient in most cases. Conclusion: With the use of this new platform for beam data commissioning, errors in beam data collection and treatment planning system modeling are greatly reduced. With the reduction in errors during acquisition, the resulting beam models are quite similar, suggesting that a common beam model may be possible in the future. Development is ongoing to create routine quality assurance tools to compare back to the beam data acquired during commissioning. I am a medical physicist for Alzyen Medical Physics, and perform commissioning services.

  19. Quality assured trusted third parties for deploying secure internet-based healthcare applications.

    PubMed

    Lekkas, Dimitrios; Gritzalis, Stefanos; Katsikas, Sokratis

    2002-06-01

    In this paper we present a complete reference framework for the provision of quality assured Trusted Third Party (TTP) services within a medical environment. The main objective is to provide all the basic guidelines towards the development of a quality system for a TTP as an organisation, which could be mapped directly to the requirements of ISO-9000 standards. The important results of the implementation of a quality system, are the enhanced trustworthiness of the TTP and the confidence of the medical society in the provided services. Furthermore, the value added certification services conform to customer requirements and are characterised by efficiency, reliability, security, credibility and trust. The internal organisation acquires a clear and strict structure and maximises its effectiveness by establishing quality management, committed to control, assure and improve quality. The TTP requirements for quality are identified and the various elements of the quality system are described illustratively.

  20. 10 CFR 71.37 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Quality assurance. 71.37 Section 71.37 Energy NUCLEAR... Package Approval § 71.37 Quality assurance. (a) The applicant shall describe the quality assurance program... quality assurance program that are applicable to the particular package design under...

  1. 10 CFR 71.37 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Quality assurance. 71.37 Section 71.37 Energy NUCLEAR... Package Approval § 71.37 Quality assurance. (a) The applicant shall describe the quality assurance program... quality assurance program that are applicable to the particular package design under...

  2. 10 CFR 71.37 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance. 71.37 Section 71.37 Energy NUCLEAR... Package Approval § 71.37 Quality assurance. (a) The applicant shall describe the quality assurance program... quality assurance program that are applicable to the particular package design under...

  3. 10 CFR 71.37 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance. 71.37 Section 71.37 Energy NUCLEAR... Package Approval § 71.37 Quality assurance. (a) The applicant shall describe the quality assurance program... quality assurance program that are applicable to the particular package design under...

  4. 10 CFR 71.37 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance. 71.37 Section 71.37 Energy NUCLEAR... Package Approval § 71.37 Quality assurance. (a) The applicant shall describe the quality assurance program... quality assurance program that are applicable to the particular package design under...

  5. Thoughts on Internal and External Quality Assurance

    ERIC Educational Resources Information Center

    Zhang, Jianxin

    2012-01-01

    Quality assurance of higher education is made up of two parts: internal quality assurance (IQA) and external quality assurance (EQA). Both belong to a union of the coexistence and balance of yin and yang. But in reality there exists a paradox of "confusion of quality assurance (QA) subject consciousness, singularity of social QA and lack of QA…

  6. Instructional Quality Assurance at Lansing Community College.

    ERIC Educational Resources Information Center

    Herder, Dale M.; And Others

    Drawing from the experiences of Lansing Community College (LCC), this paper offers a rationale and model for measuring instructional quality. Section I offers background on LCC's efforts to assess the quality of its courses and curricula, and to introduce such quality assurance procedures as computer-based course syllabi, department and program…

  7. Scalability of abstraction-network-based quality assurance to large SNOMED hierarchies.

    PubMed

    Ochs, Christopher; Perl, Yehoshua; Geller, James; Halper, Michael; Gu, Huanying; Chen, Yan; Elhanan, Gai

    2013-01-01

    Abstraction networks are compact summarizations of terminologies used to support orientation and terminology quality assurance (TQA). Area taxonomies and partial-area taxonomies are abstraction networks that have been successfully employed in support of TQA of small SNOMED CT hierarchies. However, nearly half of SNOMED CT's concepts are in the large Procedure and Clinical Finding hierarchies. Abstraction network derivation methodologies applied to those hierarchies resulted in taxonomies that were too large to effectively support TQA. A methodology for deriving sub-taxonomies from large taxonomies is presented, and the resultant smaller abstraction networks are shown to facilitate TQA, allowing for the scaling of our taxonomy-based TQA regimen to large hierarchies. Specifically, sub-taxonomies are derived for the Procedure hierarchy and a review for errors and inconsistencies is performed. Concepts are divided into groups within the sub-taxonomy framework, and it is shown that small groups are statistically more likely to harbor erroneous and inconsistent concepts than large groups.

  8. Quality Assurance 1992-2012

    ERIC Educational Resources Information Center

    Brown, Roger

    2012-01-01

    As the author's contribution to a series marking the Golden Jubilee of the Association of University Administrators, he reflects on changes in quality assurance over the past twenty years and speculates on what the future may hold for quality as the association moves into a new and very different competitive regime. He begins by discussing the…

  9. Quality Assurance in Higher Education: Proposals for Consultation.

    ERIC Educational Resources Information Center

    Higher Education Funding Council for England, Bristol.

    This document sets out for consultation proposals for a revised method for quality assurance of teaching and learning in higher education. The proposals cover: (1) the objectives and principles of quality assurance; (2) an approach to quality assurance based on external audit principles; (3) the collection and publication of information; (4)…

  10. A Validity-Based Approach to Quality Control and Assurance of Automated Scoring

    ERIC Educational Resources Information Center

    Bejar, Isaac I.

    2011-01-01

    Automated scoring of constructed responses is already operational in several testing programmes. However, as the methodology matures and the demand for the utilisation of constructed responses increases, the volume of automated scoring is likely to increase at a fast pace. Quality assurance and control of the scoring process will likely be more…

  11. Quality Assurance Made Easy.

    ERIC Educational Resources Information Center

    Villemaire, Lorry

    Designed to help adult learners realize the importance and necessity of implementing continuous quality improvement (CQI) in a rapidly changing, competitive, and modern world of work, this document presents a comprehensive explanation of CQI. The following topics are discussed in the book's introduction and seven chapters: importance of quality in…

  12. Failure mode and effect analysis-based quality assurance for dynamic MLC tracking systems

    SciTech Connect

    Sawant, Amit; Dieterich, Sonja; Svatos, Michelle; Keall, Paul

    2010-12-15

    Purpose: To develop and implement a failure mode and effect analysis (FMEA)-based commissioning and quality assurance framework for dynamic multileaf collimator (DMLC) tumor tracking systems. Methods: A systematic failure mode and effect analysis was performed for a prototype real-time tumor tracking system that uses implanted electromagnetic transponders for tumor position monitoring and a DMLC for real-time beam adaptation. A detailed process tree of DMLC tracking delivery was created and potential tracking-specific failure modes were identified. For each failure mode, a risk probability number (RPN) was calculated from the product of the probability of occurrence, the severity of effect, and the detectibility of the failure. Based on the insights obtained from the FMEA, commissioning and QA procedures were developed to check (i) the accuracy of coordinate system transformation, (ii) system latency, (iii) spatial and dosimetric delivery accuracy, (iv) delivery efficiency, and (v) accuracy and consistency of system response to error conditions. The frequency of testing for each failure mode was determined from the RPN value. Results: Failures modes with RPN{>=}125 were recommended to be tested monthly. Failure modes with RPN<125 were assigned to be tested during comprehensive evaluations, e.g., during commissioning, annual quality assurance, and after major software/hardware upgrades. System latency was determined to be {approx}193 ms. The system showed consistent and accurate response to erroneous conditions. Tracking accuracy was within 3%-3 mm gamma (100% pass rate) for sinusoidal as well as a wide variety of patient-derived respiratory motions. The total time taken for monthly QA was {approx}35 min, while that taken for comprehensive testing was {approx}3.5 h. Conclusions: FMEA proved to be a powerful and flexible tool to develop and implement a quality management (QM) framework for DMLC tracking. The authors conclude that the use of FMEA-based QM ensures

  13. Failure mode and effect analysis-based quality assurance for dynamic MLC tracking systems

    PubMed Central

    Sawant, Amit; Dieterich, Sonja; Svatos, Michelle; Keall, Paul

    2010-01-01

    Purpose: To develop and implement a failure mode and effect analysis (FMEA)-based commissioning and quality assurance framework for dynamic multileaf collimator (DMLC) tumor tracking systems. Methods: A systematic failure mode and effect analysis was performed for a prototype real-time tumor tracking system that uses implanted electromagnetic transponders for tumor position monitoring and a DMLC for real-time beam adaptation. A detailed process tree of DMLC tracking delivery was created and potential tracking-specific failure modes were identified. For each failure mode, a risk probability number (RPN) was calculated from the product of the probability of occurrence, the severity of effect, and the detectibility of the failure. Based on the insights obtained from the FMEA, commissioning and QA procedures were developed to check (i) the accuracy of coordinate system transformation, (ii) system latency, (iii) spatial and dosimetric delivery accuracy, (iv) delivery efficiency, and (v) accuracy and consistency of system response to error conditions. The frequency of testing for each failure mode was determined from the RPN value. Results: Failures modes with RPN≥125 were recommended to be tested monthly. Failure modes with RPN<125 were assigned to be tested during comprehensive evaluations, e.g., during commissioning, annual quality assurance, and after major software∕hardware upgrades. System latency was determined to be ∼193 ms. The system showed consistent and accurate response to erroneous conditions. Tracking accuracy was within 3%–3 mm gamma (100% pass rate) for sinusoidal as well as a wide variety of patient-derived respiratory motions. The total time taken for monthly QA was ∼35 min, while that taken for comprehensive testing was ∼3.5 h. Conclusions: FMEA proved to be a powerful and flexible tool to develop and implement a quality management (QM) framework for DMLC tracking. The authors conclude that the use of FMEA-based QM ensures efficient

  14. Quality assurance for environmental analytical chemistry: 1980

    SciTech Connect

    Gladney, E.S.; Goode, W.E.; Perrin, D.R.; Burns, C.E.

    1981-09-01

    The continuing quality assurance effort by the Environmental Surveillance Group is presented. Included are all standard materials now in use, their consensus or certified concentrations, quality control charts, and all quality assurance measurements made by H-8 during 1980.

  15. Process chemistry {ampersand} statistics quality assurance plan

    SciTech Connect

    Meznarich, H.K.

    1996-08-01

    This document provides quality assurance guidelines and quality control requirements for Process Chemistry and Statistics. This document is designed on the basis of Hanford Analytical Services Quality Assurance Plan (HASQAP) technical guidelines and is used for governing process chemistry activities.

  16. Web-based tools for quality assurance and radiation protection in diagnostic radiology.

    PubMed

    Moores, B M; Charnock, P; Ward, M

    2010-01-01

    Practical and philosophical aspects of radiation protection in diagnostic radiology have changed very little over the past 50 y even though patient doses have continued to rise significantly in this period. This rise has been driven by technological developments, such as multi-slice computed tomography, that have been able to improve diagnostic accuracy but not necessarily provide the same level of risk-benefit to all patients or groups of patients given the dose levels involved. Can practical radiation protection strategies hope to keep abreast of these ongoing developments? A project was started in 1992 in Liverpool that aimed to develop IT driven quality assurance (QA)/radiation protection software tools based upon a modular quality assurance dose data system. One of the modules involved the assessment of the patient entrance surface air kerma (ESAK) for an X-ray examination that was based upon the use of calibrated X-ray tube exposure factors to calculate ESAK as well as collecting appropriate patient details (age, sex, weight, thickness etc). The package also contained modules for logging all necessary equipment performance QA data. This paper will outline the experience gained with this system through its transition from a local application on a stand alone PC within the department to the current web-based approach. Advantages of a web-based approach to delivering such an application as well as centrally storing data originating on many hospital sites will be discussed together with the scientific support processes that can be developed with such a system. This will include local, national and international considerations. The advantages of importing radiographic examination details directly from other electronic storage systems such as a hospital's radiology information system will be presented together with practical outcomes already achieved. This will include the application of statistical techniques to the very large data sets generated. The development

  17. New developments in NASA quality assurance

    NASA Technical Reports Server (NTRS)

    Condon, John E.

    1966-01-01

    The purpose of this talk is to examine and discuss NASA's basic quality concept, the policy and procedures which define and implement this concept and subsequently explore the NASA-Industry quality relationships which are essential to the success of NASA's quality assurance concept. It is important to emphasize that NASA's Quality Assurance program is predicated on the concept of an individually tailored quality program for each significant NASA procurement - particularly, large space systems. As a result, NASA's Quality Assurance program - to be effective - must be responsive to various technologies, hardware systems, and space missions. In addition, the program must be responsive to changing policies and practices in research, engineering and procurement. Key issues in the NASA-Contractor quality relationships in the framework of an over all NASA-Industry partnership include: (1) the necessity for NASA to effectively discharge its responsibility for providing clear and complete definition of quality requirements at all phases of the procurement cycle; (2) the right of the contractor to expect an explicit definition of NASA quality requirements in each RFP and contract and to request same if it is not provided; (3) the necessity for the contractor to have a dynamic and responsive quality program which is directed towards assuring that the hardware meets all technical requirements and to accomplish this in an effective and efficient manner; and (4) the critical need for investigation and study of the economic aspects of quality and an evaluation of our policies and practices based upon the results of such a study.

  18. Feasibility study of a lead monoxide-based dosimeter for quality assurance in radiotherapy

    NASA Astrophysics Data System (ADS)

    Kim, K. T.; Han, M. J.; Heo, Y. J.; Park, J. E.; Lee, Y. K.; Kim, J. N.; Oh, K. M.; Cho, H. L.; Choi, Y. S.; Kim, J. Y.; Nam, S. H.; Park, S. K.

    2016-11-01

    Lately, cancer has been treated using high-energy radiation, and this requires highly reliable treatment plans. Therefore, a dosimeter with excellent performance, which is capable of precise dose measurement, is critical. In current clinical practices, an ionization chamber and diode utilizing the ionization reaction mechanism are widely used. Several studies have been carried out to determine optimal materials for the detector in a dosimeter to enable diagnostic imaging. Recently, studies with lead monoxide, which was shown to have low drift current and high resolving power at a high bias, were reported with the dosimeter exhibiting a fast response time against incident photons. This research aims to investigate the feasibility of a lead monoxide-based dosimeter for QA (quality assurance) in radiotherapy. In this paper, we report that the manufactured dosimeter shows similar linearity to a silicon diode and demonstrates similar characteristics in terms of PDD (percent depth dose) results for the thimble ionization chamber. Based on these results, it is demonstrated that the lead monoxide-based dosimeter complies with radiotherapy QA requirements, namely rapid response time, dose linearity, dose rate independence. Thus, we expect the lead monoxide-based dosimeter to be used commercially in the future.

  19. Software Process Improvement Initiatives Based on Quality Assurance Strategies: A QATAM Pilot Application

    NASA Astrophysics Data System (ADS)

    Winkler, Dietmar; Elberzhager, Frank; Biffl, Stefan; Eschbach, Robert

    Quality Assurance (QA) strategies, i.e., bundles of verification and validation approaches embedded within a balanced software process can support project and quality managers in systematically planning and implementing improvement initiatives. New and modified processes and methods come up frequently that seems promising candidates for improvement. Nevertheless, the impact of processes and methods strongly depends on individual project contexts. A major challenge is how to systematically select and implement "bestpractices" for product construction, verification, and validation. In this paper we present the Quality Assurance Tradeoff Analysis Method (QATAM) that supports engineers in (a) systematically identifying candidate QA strategies and (b) evaluating QA strategy variants in a given project context. We evaluate feasibility and usefulness in a pilot application in a medium-size software engineering organization. Main results were that QATAM was considered useful for identifying and evaluating various improvement initiatives applicable for large organizations as well as for small and medium enterprises.

  20. Quality Assurance Program. QAP Workbook.

    ERIC Educational Resources Information Center

    Pelavin Research Inst., Washington, DC.

    The Quality Assurance Program (QAP) workbook is intended to assist institutions of higher education conduct qualitative and quantitative evaluations of their financial aid operations in relation to requirements of Title IV of the Higher Education Act. The workbook provides a structured approach for incorporating a cyclical Title IV QA system into…

  1. FIELD DEMONSTRATION AND QUALITY ASSURANCE ...

    EPA Pesticide Factsheets

    The Demonstration of innovative field devices for the measurement of mercury in soil and sediment is being conducted under the EPA's SITE Program in February 2003 at the United States Department of Energy's (DOE) Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee and the Tennessee Department of Environment and Conservation's Department of Energy Oversight facility in Oak Ridge, Tennessee. The primary purpose of the Demonstration is to evaluate innovative field devices for the measurement of mercury in soil and sediment based on their performance and cost as compared to a conventional, off-site laboratory analytical method. The five field measurement devices listed below will be demonstrated: .Metorex's X-M ET 2000 Metal Master Analyzer, X-Ray Fluorescence Analyzer .Milestone Inc.'s Direct Mercury Analyzer (DMA-80), Thermal Decomposition Instrument.NITON's XL-700 Series Multi-Element Analyzer, X-Ray Fluorescence Analyzer .Ohio Lumex's RA-915+ Portable Mercury Analyzer, Atomic Absorption Spectrometer, Thermal Decompostion Attachment RP 91C .MTI, Inc.'s PDV 5000 Hand Held Instrument, Anodic Stripping Voltamm eter<1). This Demonstration Plan describes the procedures that will be used to verify the performance and cost of each field measurement device. The plan incorporates the quality assurance and quality control elements needed to generate data of sufficient quality to document each device's performance and cost. A separate Innovative Technology Verifica

  2. Quality Assurance and Quality Control, Part 1.

    PubMed

    Akers, Michael J

    2015-01-01

    The tragedy surrounding the New England Compounding Center and contaminated steroid syringe preparations clearly points out what can happen if quality-assurance and quality-control procedures are not strictly practiced in the compounding of sterile preparations. This article represents part 1 of a 2-part article on quality-assurance and quality-control procedures and serves as an introduction to the topic of finished preparation release checks and tests. Part 1 highlights what is required to comply with United States Pharmacopeia General Chapter <797>, and part 2 continues with a discussion on the requirements of <797> as well as what is required in chapter < 1163> with respect to quality assurance of compounded sterile preparations. Written procedures, good documentation practices, and specific details for clarity, sterility, and bacterial endotoxin (pyrogen) testing are presented in this article.

  3. Waste Management Quality Assurance Plan

    SciTech Connect

    Not Available

    1993-11-30

    Lawrence Berkeley Laboratory`s Environment Department addresses its responsibilities through activities in a variety of areas. The need for a comprehensive management control system for these activities has been identified by the Department of Energy (DOE). The WM QA (Waste Management Quality Assurance) Plan is an integral part of a management system that provides controls necessary to ensure that the department`s activities are planned, performed, documented, and verified. This WM QA Plan defines the requirements of the WM QA program. These requirements are derived from DOE Order 5700.6C, Quality Assurance, the LBL Operating and Assurance Program Plan (OAP, LBL PUB-3111), and other environmental compliance documents applicable to WM activities. The requirements presented herein, as well as the procedures and methodologies that direct the implementation of these requirements, will undergo review and revisions as necessary. The provisions of this QA Plan and its implementing documents apply to quality-affecting activities performed by and for WM. It is also applicable to WM contractors, vendors, and other LBL organizations associated with WM activities, except where such contractors, vendors, or organizations are governed by their own WM-approved QA programs. References used in the preparation of this document are (1) ASME NQA-1-1989, (2) ANSI/ASQC E4 (Draft), (3) Waste Management Quality Assurance Implementing Management Plan (LBL PUB-5352, Rev. 1), (4) LBL Operating and Assurance Program Plan (OAP), LBL PUB-3111, 2/3/93. A list of terms and definitions used throughout this document is included as Appendix A.

  4. Commissioning and quality assurance for a respiratory training system based on audiovisual biofeedback.

    PubMed

    Cui, Guoqiang; Gopalan, Siddharth; Yamamoto, Tokihiro; Berger, Jonathan; Maxim, Peter G; Keall, Paul J

    2010-07-12

    A respiratory training system based on audiovisual biofeedback has been implemented at our institution. It is intended to improve patients' respiratory regularity during four-dimensional (4D) computed tomography (CT) image acquisition. The purpose is to help eliminate the artifacts in 4D-CT images caused by irregular breathing, as well as improve delivery efficiency during treatment, where respiratory irregularity is a concern. This article describes the commissioning and quality assurance (QA) procedures developed for this peripheral respiratory training system, the Stanford Respiratory Training (START) system. Using the Varian real-time position management system for the respiratory signal input, the START software was commissioned and able to acquire sample respiratory traces, create a patient-specific guiding waveform, and generate audiovisual signals for improving respiratory regularity. Routine QA tests that include hardware maintenance, visual guiding-waveform creation, auditory sounds synchronization, and feedback assessment, have been developed for the START system. The QA procedures developed here for the START system could be easily adapted to other respiratory training systems based on audiovisual biofeedback.

  5. [Quality assurance concepts in intensive care medicine].

    PubMed

    Brinkmann, A; Braun, J P; Riessen, R; Dubb, R; Kaltwasser, A; Bingold, T M

    2015-11-01

    Intensive care medicine (ICM) is characterized by a high degree of complexity and requires intense communication and collaboration on interdisciplinary and multiprofessional levels. In order to achieve good quality of care in this environment and to prevent errors, a proactive quality and error management as well as a structured quality assurance system are essential. Since the early 1990s, German intensive care societies have developed concepts for quality management and assurance in ICM. In 2006, intensive care networks were founded in different states to support the implementation of evidence-based knowledge into clinical routine and to improve medical outcome, efficacy, and efficiency in ICM. Current instruments and concepts of quality assurance in German ICM include core intensive care data from the data registry DIVI REVERSI, quality indicators, peer review in intensive care, IQM peer review, and various certification processes. The first version of German ICM quality indicators was published in 2010 by an interdisciplinary and interprofessional expert commission. Key figures, indicators, and national benchmarks are intended to describe the quality of structures, processes, and outcomes in intensive care. Many of the quality assurance tools have proved to be useful in clinical practice, but nationwide implementation still can be improved.

  6. Quality assurance for image-guided radiation therapy utilizing CT-based technologies: A report of the AAPM TG-179

    SciTech Connect

    Bissonnette, Jean-Pierre; Balter, Peter A.; Dong Lei; Langen, Katja M.; Lovelock, D. Michael; Miften, Moyed; Moseley, Douglas J.; Pouliot, Jean; Sonke, Jan-Jakob; Yoo, Sua

    2012-04-15

    Purpose: Commercial CT-based image-guided radiotherapy (IGRT) systems allow widespread management of geometric variations in patient setup and internal organ motion. This document provides consensus recommendations for quality assurance protocols that ensure patient safety and patient treatment fidelity for such systems. Methods: The AAPM TG-179 reviews clinical implementation and quality assurance aspects for commercially available CT-based IGRT, each with their unique capabilities and underlying physics. The systems described are kilovolt and megavolt cone-beam CT, fan-beam MVCT, and CT-on-rails. A summary of the literature describing current clinical usage is also provided. Results: This report proposes a generic quality assurance program for CT-based IGRT systems in an effort to provide a vendor-independent program for clinical users. Published data from long-term, repeated quality control tests form the basis of the proposed test frequencies and tolerances.Conclusion: A program for quality control of CT-based image-guidance systems has been produced, with focus on geometry, image quality, image dose, system operation, and safety. Agreement and clarification with respect to reports from the AAPM TG-101, TG-104, TG-142, and TG-148 has been addressed.

  7. [Quality assurance in acupuncture therapy].

    PubMed

    Kubiena, G

    1996-04-01

    Quality assurance for acupuncture therapy requires a good basic and on-going training in both conventional western medicine as well as in the theory and practice of acupuncture, the ability to synthesize the patient's objective findings and subjective feelings, and honesty with the patient and towards oneself. Thus, based on the continuous critical evaluation of the objective and subjective parameters, the question of acupunture as the optimal form of therapy for this specific case is honestly answered and one has the courage to admit failures. With regard to the theory, surveys of the acupuncture literature show that a considerable improvement in quality and honesty is necessary. There is a lack of standardised experimental methods (e.g. 28 different placebos in 28 different studies!). Especially German acupuncture journals have a disturbed relation to failures. To hide or deny failures is of no benefit neither to acupuncture, science to the relationship between the physician and the patient since the practitioner must be able to rely on the information in the literature. Furthermore, one should be open minded to alternative methods even if this means to refer a patient to a colleague.

  8. Clinical evaluation of an anatomy-based patient specific quality assurance system.

    PubMed

    Hauri, Pascal; Verlaan, Sarah; Graydon, Shaun; Ahnen, Linda; Klöck, Stephan; Lang, Stephanie

    2014-03-06

    The Delta(4DVH) Anatomy 3D quality assurance (QA) system (ScandiDos), which converts the measured detector dose into the dose distribution in the patient geometry was evaluated. It allows a direct comparison of the calculated 3D dose with the measured back-projected dose. In total, 16 static and 16 volumetric-modulated arc therapy (VMAT) fields were planned using four different energies. Isocenter dose was measured with a pinpoint chamber in homogeneous phantoms to investigate the dose prediction by the Delta(4DVH) Anatomy algorithm for static fields. Dose distributions of VMAT fields were measured using GAFCHROMIC film. Gravitational gantry errors up to 10° were introduced into all VMAT plans to study the potential of detecting errors. Additionally, 20 clinical treatment plans were verified. For static fields, the Delta(4DVH) Anatomy predicted the isocenter dose accurately, with a deviation to the measured phantom dose of 1.1% ± 0.6%. For VMAT fields the predicted Delta(4DVH) Anatomy dose in the isocenter plane corresponded to the measured dose in the phantom, with an average gamma agreement index (GAI) (3 mm/3%) of 96.9± 0.4%. The Delta(4DVH) Anatomy detected the induced systematic gantry error of 10° with a relative GAI (3 mm/3%) change of 5.8% ± 1.6%. The conventional Delta(4PT) QA system detected a GAI change of 4.2%± 2.0%. The conventional Delta(4PT) GAI (3 mm/3%) was 99.8% ± 0.4% for the clinical treatment plans. The mean body and PTV-GAI (3 mm/5%) for the Delta(4DVH) Anatomy were 96.4% ± 2.0% and 97.7%± 1.8%; however, this dropped to 90.8%± 3.4% and 87.1% ± 4.1% for passing criteria of 3 mm/3%. The anatomy-based patient specific quality assurance system predicts the dose distribution correctly for a homogeneous case. The limiting factor for the error detection is the large variability in the error-free plans. The dose calculation algorithm is inferior to that used in the TPS (Eclipse).

  9. QUALITY ASSURANCE FOR PCR

    EPA Science Inventory

    The U.S. Environmental Protection Agency (EPA) held a workshop in January 2003 on the detection of viruses in water using polymerase chain reaction (PCR)-based methods. Speakers were asked to address a series of specific questions, including whether a single standard method coul...

  10. Scalability of Abstraction-Network-Based Quality Assurance to Large SNOMED Hierarchies

    PubMed Central

    Ochs, Christopher; Perl, Yehoshua; Geller, James; Halper, Michael; Gu, Huanying; Chen, Yan; Elhanan, Gai

    2013-01-01

    Abstraction networks are compact summarizations of terminologies used to support orientation and terminology quality assurance (TQA). Area taxonomies and partial-area taxonomies are abstraction networks that have been successfully employed in support of TQA of small SNOMED CT hierarchies. However, nearly half of SNOMED CT’s concepts are in the large Procedure and Clinical Finding hierarchies. Abstraction network derivation methodologies applied to those hierarchies resulted in taxonomies that were too large to effectively support TQA. A methodology for deriving sub-taxonomies from large taxonomies is presented, and the resultant smaller abstraction networks are shown to facilitate TQA, allowing for the scaling of our taxonomy-based TQA regimen to large hierarchies. Specifically, sub-taxonomies are derived for the Procedure hierarchy and a review for errors and inconsistencies is performed. Concepts are divided into groups within the sub-taxonomy framework, and it is shown that small groups are statistically more likely to harbor erroneous and inconsistent concepts than large groups. PMID:24551393

  11. A Family-Based Framework for Supporting Quality Assurance of Biomedical Ontologies in BioPortal

    PubMed Central

    He, Zhe; Ochs, Christopher; Agrawal, Ankur; Perl, Yehoshua; Zeginis, Dimitris; Tarabanis, Konstantinos; Elhanan, Gai; Halper, Michael; Noy, Natasha; Geller, James

    2013-01-01

    BioPortal contains over 300 ontologies, for which quality assurance (QA) is critical. Abstraction networks (ANs), compact summarizations of ontology structure and content, have been used in such QA efforts, typically in a “one-off” manner for a single ontology. Ontologies can be characterized—independently of knowledge-content focus—from a structural standpoint leading to the formulation of ontology families. A family is defined as a set of ontologies satisfying some overarching condition regarding their structural features. Seven such families, comprising 186 ontologies, are identified. To increase efficiency, a new family-based QA framework is introduced in which an automated, uniform AN derivation technique and accompanying semi-automated, uniform QA regimen are applicable to the ontologies of a given family. Specifically, across an entire family, the QA efforts exploit family-wide AN features in the characterization of sets of classes that are more likely to harbor errors. The approach is demonstrated on the Cancer Chemoprevention BioPortal ontology. PMID:24551360

  12. Quality assurance in forensic pathology.

    PubMed

    Ong, Beng Beng; Milne, Nathan

    2009-06-01

    One of the requirements for proper running of a pathology laboratory is implementation of a quality assurance programme. Forensic pathology is not exempted, especially so when cases are increasing in complexity. It is not difficult to introduce a quality assurance programme even in a small forensic centre. Among the steps that can be implemented including introduction of a set of minimal standards in performance of the autopsy, timeliness and report writing, a vigorous peer review process either internally or externally and participation in external quality programmes. Proper documentation of the post-mortem process (photography, slides and blocks and various imaging modalities) is to be encouraged. There should be limits set on workload of pathologists as overburden is known to lower standards. A pleasant work environment is also essential. Personal continuous medical education should be made mandatory. Introduction of a quality assurance programme will not only improve standards but minimise possible negligence. The post-mortem reports will be seen to carry more weight in court.

  13. 40 CFR 30.54 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Quality assurance. 30.54 Section 30.54... NON-PROFIT ORGANIZATIONS Post-Award Requirements Reports and Records § 30.54 Quality assurance. If the... data generation, the grantee shall develop and implement quality assurance practices consisting...

  14. 40 CFR 194.22 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Quality assurance. 194.22 Section 194... General Requirements § 194.22 Quality assurance. (a)(1) As soon as practicable after April 9, 1996, the Department shall adhere to a quality assurance program that implements the requirements of ASME...

  15. 40 CFR 194.22 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Quality assurance. 194.22 Section 194... General Requirements § 194.22 Quality assurance. (a)(1) As soon as practicable after April 9, 1996, the Department shall adhere to a quality assurance program that implements the requirements of ASME...

  16. 40 CFR 31.45 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Quality assurance. 31.45 Section 31.45... Requirements Reports, Records, Retention, and Enforcement § 31.45 Quality assurance. If the grantee's project... quality assurance practices consisting of policies, procedures, specifications, standards,...

  17. 40 CFR 31.45 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Quality assurance. 31.45 Section 31.45... Requirements Reports, Records, Retention, and Enforcement § 31.45 Quality assurance. If the grantee's project... quality assurance practices consisting of policies, procedures, specifications, standards,...

  18. 40 CFR 30.54 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Quality assurance. 30.54 Section 30.54... NON-PROFIT ORGANIZATIONS Post-Award Requirements Reports and Records § 30.54 Quality assurance. If the... data generation, the grantee shall develop and implement quality assurance practices consisting...

  19. 40 CFR 31.45 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Quality assurance. 31.45 Section 31.45... Requirements Reports, Records, Retention, and Enforcement § 31.45 Quality assurance. If the grantee's project... quality assurance practices consisting of policies, procedures, specifications, standards,...

  20. 40 CFR 194.22 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Quality assurance. 194.22 Section 194... General Requirements § 194.22 Quality assurance. (a)(1) As soon as practicable after April 9, 1996, the Department shall adhere to a quality assurance program that implements the requirements of ASME...

  1. 40 CFR 30.54 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Quality assurance. 30.54 Section 30.54... NON-PROFIT ORGANIZATIONS Post-Award Requirements Reports and Records § 30.54 Quality assurance. If the... data generation, the grantee shall develop and implement quality assurance practices consisting...

  2. 40 CFR 30.54 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Quality assurance. 30.54 Section 30.54... NON-PROFIT ORGANIZATIONS Post-Award Requirements Reports and Records § 30.54 Quality assurance. If the... data generation, the grantee shall develop and implement quality assurance practices consisting...

  3. 40 CFR 194.22 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Quality assurance. 194.22 Section 194... General Requirements § 194.22 Quality assurance. (a)(1) As soon as practicable after April 9, 1996, the Department shall adhere to a quality assurance program that implements the requirements of ASME...

  4. 40 CFR 30.54 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Quality assurance. 30.54 Section 30.54... NON-PROFIT ORGANIZATIONS Post-Award Requirements Reports and Records § 30.54 Quality assurance. If the... data generation, the grantee shall develop and implement quality assurance practices consisting...

  5. 40 CFR 194.22 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Quality assurance. 194.22 Section 194... General Requirements § 194.22 Quality assurance. (a)(1) As soon as practicable after April 9, 1996, the Department shall adhere to a quality assurance program that implements the requirements of ASME...

  6. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  7. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  8. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  9. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  10. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  11. A new transmission methodology for quality assurance in radiotherapy based on radiochromic film measurements.

    PubMed

    do Amaral, Leonardo L; de Oliveira, Harley F; Pavoni, Juliana F; Sampaio, Francisco; Netto, Thomaz Ghilardi

    2015-09-01

    Despite individual quality assurance (QA) being recommended for complex techniques in radiotherapy (RT) treatment, the possibility of errors in dose delivery during therapeutic application has been verified. Therefore, it is fundamentally important to conduct in vivo QA during treatment. This work presents an in vivo transmission quality control methodology, using radiochromic film (RCF) coupled to the linear accelerator (linac) accessory holder. This QA methodology compares the dose distribution measured by the film in the linac accessory holder with the dose distribution expected by the treatment planning software. The calculated dose distribution is obtained in the coronal and central plane of a phantom with the same dimensions of the acrylic support used for positioning the film but in a source-to-detector distance (SDD) of 100 cm, as a result of transferring the IMRT plan in question with all the fields positioned with the gantry vertically, that is, perpendicular to the phantom. To validate this procedure, first of all a Monte Carlo simulation using PENELOPE code was done to evaluate the differences between the dose distributions measured by the film in a SDD of 56.8 cm and 100 cm. After that, several simple dose distribution tests were evaluated using the proposed methodology, and finally a study using IMRT treatments was done. In the Monte Carlo simulation, the mean percentage of points approved in the gamma function comparing the dose distribution acquired in the two SDDs were 99.92%±0.14%. In the simple dose distribution tests, the mean percentage of points approved in the gamma function were 99.85%±0.26% and the mean percentage differences in the normalization point doses were -1.41%. The transmission methodology was approved in 24 of 25 IMRT test irradiations. Based on these results, it can be concluded that the proposed methodology using RCFs can be applied for in vivo QA in RT treatments. PACS number: 87.55.Qr, 87.55.km, 87.55.N.

  12. A new transmission methodology for quality assurance in radiotherapy based on radiochromic film measurements.

    PubMed

    do Amaral, Leonardo L; de Oliveira, Harley F; Pavoni, Juliana F; Sampaio, Franciso; Ghillardi Netto, Thomaz

    2015-09-08

    Despite individual quality assurance (QA) being recommended for complex techniques in radiotherapy (RT) treatment, the possibility of errors in dose delivery during therapeutic application has been verified. Therefore, it is fundamentally important to conduct in vivo QA during treatment. This work presents an in vivo transmission quality control methodology, using radiochromic film (RCF) coupled to the linear accelerator (linac) accessory holder. This QA methodology compares the dose distribution measured by the film in the linac accessory holder with the dose distribution expected by the treatment planning software. The calculated dose distribution is obtained in the coronal and central plane of a phantom with the same dimensions of the acrylic support used for positioning the film but in a source-to-detector distance (SDD) of 100 cm, as a result of transferring the IMRT plan in question with all the fields positioned with the gantry vertically, that is, perpendicular to the phantom. To validate this procedure, first of all a Monte Carlo simulation using PENELOPE code was done to evaluate the differences between the dose distributions measured by the film in a SDD of 56.8 cm and 100 cm. After that, several simple dose distribution tests were evaluated using the proposed methodology, and finally a study using IMRT treatments was done. In the Monte Carlo simulation, the mean percentage of points approved in the gamma function comparing the dose distribution acquired in the two SDDs were 99.92% ± 0.14%. In the simple dose distribution tests, the mean percentage of points approved in the gamma function were 99.85% ± 0.26% and the mean percentage differences in the normalization point doses were -1.41%. The transmission methodology was approved in 24 of 25 IMRT test irradiations. Based on these results, it can be concluded that the proposed methodology using RCFs can be applied for in vivo QA in RT treatments.

  13. Beef Quality Assurance in Feedlots.

    PubMed

    Smith, Robert A; Thomson, Daniel U; Lee, Tiffany L

    2015-07-01

    This article discusses the Beef Quality Assurance (BQA) program, which was created by beef producers and veterinarians. The program has evolved from antibiotic residue avoidance to include animal handling, cattle comfort, food safety, and much more. It provides guidance to producers and veterinarians on best management practices and allows the beef industry to be transparent about the practices used. Veterinarians are key to helping producers implement BQA in their beef operations.

  14. Usalpharma: a cloud-based architecture to support quality assurance training processes in health area using virtual worlds.

    PubMed

    García-Peñalvo, Francisco J; Cruz-Benito, Juan; Maderuelo, Cristina; Pérez-Blanco, Jonás Samuel; Martín-Suárez, Ana

    2014-01-01

    This paper discusses how cloud-based architectures can extend and enhance the functionality of the training environments based on virtual worlds and how, from this cloud perspective, we can provide support to analysis of training processes in the area of health, specifically in the field of training processes in quality assurance for pharmaceutical laboratories, presenting a tool for data retrieval and analysis that allows facing the knowledge discovery in the happenings inside the virtual worlds.

  15. Usalpharma: A Cloud-Based Architecture to Support Quality Assurance Training Processes in Health Area Using Virtual Worlds

    PubMed Central

    García-Peñalvo, Francisco J.; Pérez-Blanco, Jonás Samuel; Martín-Suárez, Ana

    2014-01-01

    This paper discusses how cloud-based architectures can extend and enhance the functionality of the training environments based on virtual worlds and how, from this cloud perspective, we can provide support to analysis of training processes in the area of health, specifically in the field of training processes in quality assurance for pharmaceutical laboratories, presenting a tool for data retrieval and analysis that allows facing the knowledge discovery in the happenings inside the virtual worlds. PMID:24778593

  16. Quality assurance program plan for Building 327

    SciTech Connect

    Tanke, J.M.

    1997-05-22

    This Quality Assurance Program Plan (QAPP) provides an overview of the quality assurance program for Building 327. The program applies to the facility safety structures, systems, and components and to activities that could affect safety structures, systems, and components. Adherence to the quality assurance program ensures the following: US Department of Energy missions and objectives are effectively accomplished; Products and services are safe, reliable, and meet or exceed the requirements and expectations of the user; Hazards to the public, to Hanford Site and facility workers, and to the environment are minimized. The format of this Quality Assurance Program Plan is structured to parallel that of 10 CFR 83 0.120, Quality Assurance Requirements. This Quality Assurance Program Plan (QAPP) provides information on how the Quality Assurance Program is implemented for the 324 Building B-Cell Safety Cleanout Project (BCCP). This QAPP is responsive to the Westinghouse Hanford Company Quality Assurance Program and Implementation Plan, WHC-SP 113 1, for 10 CFR 830.120, Nuclear Safety Management, Quality Assurance Requirements; and DOE Order 5700.6C, Quality Assurance. This QAPP supersedes PNNL PNL-MA-70 QAP Quality Assurance Plan No. WTC-050 Rev. 2, issue date May 3, 1996.

  17. An EPID-based system for gantry-resolved MLC quality assurance for VMAT.

    PubMed

    Zwan, Benjamin J; Barnes, Michael P; Fuangord, Todsaporn; Stanton, Cameron J; O'Connor, Daryl J; Keall, Paul J; Greer, Peter B

    2016-09-08

    Multileaf collimator (MLC) positions should be precisely and independently mea-sured as a function of gantry angle as part of a comprehensive quality assurance (QA) program for volumetric-modulated arc therapy (VMAT). It is also ideal that such a QA program has the ability to relate MLC positional accuracy to patient-specific dosimetry in order to determine the clinical significance of any detected MLC errors. In this work we propose a method to verify individual MLC trajectories during VMAT deliveries for use as a routine linear accelerator QA tool. We also extend this method to reconstruct the 3D patient dose in the treatment planning sys-tem based on the measured MLC trajectories and the original DICOM plan file. The method relies on extracting MLC positions from EPID images acquired at 8.41fps during clinical VMAT deliveries. A gantry angle is automatically tagged to each image in order to obtain the MLC trajectories as a function of gantry angle. This analysis was performed for six clinical VMAT plans acquired at monthly intervals for three months. The measured trajectories for each delivery were compared to the MLC positions from the DICOM plan file. The maximum mean error detected was 0.07 mm and a maximum root-mean-square error was 0.8 mm for any leaf of any delivery. The sensitivity of this system was characterized by introducing random and systematic MLC errors into the test plans. It was demonstrated that the system is capable of detecting random and systematic errors on the range of 1-2mm and single leaf calibration errors of 0.5 mm. The methodology developed in the work has potential to be used for efficient routine linear accelerator MLC QA and pretreatment patient-specific QA and has the ability to relate measured MLC positional errors to 3D dosimetric errors within a patient volume.

  18. An EPID-based system for gantry-resolved MLC quality assurance for VMAT.

    PubMed

    Zwan, Benjamin J; Barnes, Michael P; Fuangrod, Todsaporn; Stanton, Cameron J; O'Connor, Daryl J; Keall, Paul J; Greer, Peter B

    2016-09-01

    Multileaf collimator (MLC) positions should be precisely and independently measured as a function of gantry angle as part of a comprehensive quality assurance (QA) program for volumetric-modulated arc therapy (VMAT). It is also ideal that such a QA program has the ability to relate MLC positional accuracy to patient-specific dosimetry in order to determine the clinical significance of any detected MLC errors. In this work we propose a method to verify individual MLC trajectories during VMAT deliveries for use as a routine linear accelerator QA tool. We also extend this method to reconstruct the 3D patient dose in the treatment planning system based on the measured MLC trajectories and the original DICOM plan file. The method relies on extracting MLC positions from EPID images acquired at 8.41 fps during clinical VMAT deliveries. A gantry angle is automatically tagged to each image in order to obtain the MLC trajectories as a function of gantry angle. This analysis was performed for six clinical VMAT plans acquired at monthly intervals for three months. The measured trajectories for each delivery were compared to the MLC positions from the DICOM plan file. The maximum mean error detected was 0.07 mm and a maximum root-mean-square error was 0.8 mm for any leaf of any delivery. The sensitivity of this system was characterized by introducing random and systematic MLC errors into the test plans. It was demonstrated that the system is capable of detecting random and systematic errors on the range of 1-2 mm and single leaf calibration errors of 0.5 mm. The methodology developed in the work has potential to be used for efficient routine linear accelerator MLC QA and pretreatment patient-specific QA and has the ability to relate measured MLC positional errors to 3D dosimetric errors within a patient volume. PACS number(s): 87.55.Qr.

  19. 48 CFR 246.470 - Government contract quality assurance actions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... quality assurance actions. 246.470 Section 246.470 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.470 Government contract quality assurance actions....

  20. Quality Assurance in the Presence of Variability

    NASA Astrophysics Data System (ADS)

    Lauenroth, Kim; Metzger, Andreas; Pohl, Klaus

    Software Product Line Engineering (SPLE) is a reuse-driven development paradigm that has been applied successfully in information system engineering and other domains. Quality assurance of the reusable artifacts of the product line (e.g. requirements, design, and code artifacts) is essential for successful product line engineering. As those artifacts are reused in several products, a defect in a reusable artifact can affect several products of the product line. A central challenge for quality assurance in product line engineering is how to consider product line variability. Since the reusable artifacts contain variability, quality assurance techniques from single-system engineering cannot directly be applied to those artifacts. Therefore, different strategies and techniques have been developed for quality assurance in the presence of variability. In this chapter, we describe those strategies and discuss in more detail one of those strategies, the so called comprehensive strategy. The comprehensive strategy aims at checking the quality of all possible products of the product line and thus offers the highest benefits, since it is able to uncover defects in all possible products of the product line. However, the central challenge for applying the comprehensive strategy is the complexity that results from the product line variability and the large number of potential products of a product line. In this chapter, we present one concrete technique that we have developed to implement the comprehensive strategy that addresses this challenge. The technique is based on model checking technology and allows for a comprehensive verification of domain artifacts against temporal logic properties.

  1. 10 CFR 26.167 - Quality assurance and quality control.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Quality assurance and quality control. 26.167 Section 26... Department of Health and Human Services § 26.167 Quality assurance and quality control. (a) Quality assurance... calibrators and controls. (c) Quality control requirements for performing initial and confirmatory...

  2. 10 CFR 26.137 - Quality assurance and quality control.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Quality assurance and quality control. 26.137 Section 26....137 Quality assurance and quality control. (a) Quality assurance program. Each licensee testing... metabolites. (b) Performance testing and quality control requirements for validity screening tests....

  3. 10 CFR 26.137 - Quality assurance and quality control.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Quality assurance and quality control. 26.137 Section 26....137 Quality assurance and quality control. (a) Quality assurance program. Each licensee testing... metabolites. (b) Performance testing and quality control requirements for validity screening tests....

  4. 10 CFR 26.167 - Quality assurance and quality control.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Quality assurance and quality control. 26.167 Section 26... Department of Health and Human Services § 26.167 Quality assurance and quality control. (a) Quality assurance... calibrators and controls. (c) Quality control requirements for performing initial and confirmatory...

  5. 10 CFR 26.137 - Quality assurance and quality control.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Quality assurance and quality control. 26.137 Section 26....137 Quality assurance and quality control. (a) Quality assurance program. Each licensee testing... metabolites. (b) Performance testing and quality control requirements for validity screening tests....

  6. 10 CFR 26.167 - Quality assurance and quality control.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Quality assurance and quality control. 26.167 Section 26... Department of Health and Human Services § 26.167 Quality assurance and quality control. (a) Quality assurance... calibrators and controls. (c) Quality control requirements for performing initial and confirmatory...

  7. 10 CFR 26.167 - Quality assurance and quality control.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Quality assurance and quality control. 26.167 Section 26... Department of Health and Human Services § 26.167 Quality assurance and quality control. (a) Quality assurance... calibrators and controls. (c) Quality control requirements for performing initial and confirmatory...

  8. 10 CFR 26.137 - Quality assurance and quality control.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Quality assurance and quality control. 26.137 Section 26....137 Quality assurance and quality control. (a) Quality assurance program. Each licensee testing... metabolites. (b) Performance testing and quality control requirements for validity screening tests....

  9. 10 CFR 26.167 - Quality assurance and quality control.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Quality assurance and quality control. 26.167 Section 26... Department of Health and Human Services § 26.167 Quality assurance and quality control. (a) Quality assurance... calibrators and controls. (c) Quality control requirements for performing initial and confirmatory...

  10. 10 CFR 26.137 - Quality assurance and quality control.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Quality assurance and quality control. 26.137 Section 26....137 Quality assurance and quality control. (a) Quality assurance program. Each licensee testing... metabolites. (b) Performance testing and quality control requirements for validity screening tests....

  11. Quality Assurance for Clinical Trials

    PubMed Central

    Ibbott, Geoffrey S.; Haworth, Annette; Followill, David S.

    2013-01-01

    Cooperative groups, of which the Radiation Therapy Oncology Group is one example, conduct national clinical trials that often involve the use of radiation therapy. In preparation for such a trial, the cooperative group prepares a protocol to define the goals of the trial, the rationale for its design, and the details of the treatment procedure to be followed. The Radiological Physics Center (RPC) is one of several quality assurance (QA) offices that is charged with assuring that participating institutions deliver doses that are clinically consistent and comparable. The RPC does this by conducting a variety of independent audits and credentialing processes. The RPC has compiled data showing that credentialing can help institutions comply with the requirements of a cooperative group clinical protocol. Phantom irradiations have been demonstrated to exercise an institution’s procedures for planning and delivering advanced external beam techniques (1–3). Similarly, RPC data indicate that a rapid review of patient treatment records or planning procedures can improve compliance with clinical trials (4). The experiences of the RPC are presented as examples of the contributions that a national clinical trials QA center can make to cooperative group trials. These experiences illustrate the critical need for comprehensive QA to assure that clinical trials are successful and cost-effective. The RPC is supported by grants CA 10953 and CA 81647 from the National Cancer Institute, NIH, DHHS. PMID:24392352

  12. EPA Quality Assurance Policy Statement

    EPA Pesticide Factsheets

    This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

  13. Infrared camera based thermometry for quality assurance of superficial hyperthermia applicators

    NASA Astrophysics Data System (ADS)

    Müller, Johannes; Hartmann, Josefin; Bert, Christoph

    2016-04-01

    The purpose of this work was to provide a feasible and easy to apply phantom-based quality assurance (QA) procedure for superficial hyperthermia (SHT) applicators by means of infrared (IR) thermography. The VarioCAM hr head (InfraTec, Dresden, Germany) was used to investigate the SA-812, the SA-510 and the SA-308 applicators (all: Pyrexar Medical, Salt Lake City, UT, USA). Probe referencing and thermal equilibrium procedures were applied to determine the emissivity of the muscle-equivalent agar phantom. Firstly, the disturbing potential of thermal conduction on the temperature distribution inside the phantom was analyzed through measurements after various heating times (5-50 min). Next, the influence of the temperature of the water bolus between the SA-812 applicator and the phantom’s surface was evaluated by varying its temperature. The results are presented in terms of characteristic values (extremal temperatures, percentiles and effective field sizes (EFS)) and temperature-area-histograms (TAH). Lastly, spiral antenna applicators were compared by the introduced characteristics. The emissivity of the used phantom was found to be ɛ  =  0.91  ±  0.03, the results of both methods coincided. The influence of thermal conduction with regard to heating time was smaller than expected; the EFS of the SA-812 applicator had a size of (68.6  ±  6.7) cm2, averaged group variances were  ±3.0 cm2. The TAHs show that the influence of the water bolus is mostly limited to depths of  <3 cm, yet it can greatly enhance or reduce heat generation in this regime: at a depth of 1 cm, measured maximal temperature rises were 14.5 °C for T Bolus  =  30 °C and 8.6 °C for T Bolus  =  21 °C, respectively. The EFS was increased, too. The three spiral antenna applicators generated similar heat distributions. Generally, the procedure proved to yield informative insights into applicator characteristics, thus making the application

  14. Quality Assurance Specifications for Planetary Protection Assays

    NASA Astrophysics Data System (ADS)

    Baker, Amy

    As the European Space Agency planetary protection (PP) activities move forward to support the ExoMars and other planetary missions, it will become necessary to increase staffing of labo-ratories that provide analyses for these programs. Standardization of procedures, a comprehen-sive quality assurance program, and unilateral training of personnel will be necessary to ensure that the planetary protection goals and schedules are met. The PP Quality Assurance/Quality Control (QAQC) program is designed to regulate and monitor procedures performed by labora-tory personnel to ensure that all work meets data quality objectives through the assembly and launch process. Because personnel time is at a premium and sampling schedules are often de-pendent on engineering schedules, it is necessary to have flexible staffing to support all sampling requirements. The most productive approach to having a competent and flexible work force is to establish well defined laboratory procedures and training programs that clearly address the needs of the program and the work force. The quality assurance specification for planetary protection assays has to ensure that labora-tories and associated personnel can demonstrate the competence to perform assays according to the applicable standard AD4. Detailed subjects included in the presentation are as follows: • field and laboratory control criteria • data reporting • personnel training requirements and certification • laboratory audit criteria. Based upon RD2 for primary and secondary validation and RD3 for data quality objectives, the QAQC will provide traceable quality assurance safeguards by providing structured laboratory requirements for guidelines and oversight including training and technical updates, standardized documentation, standardized QA/QC checks, data review and data archiving.

  15. Quality Assurance in Chinese Higher Education

    ERIC Educational Resources Information Center

    Li, Yuan

    2010-01-01

    Quality assurance has been integrated into the fabric of higher education in China, with the issue of quality in higher education--how to evaluate it and how to enhance it--now taking centre stage in Chinese higher education. In the past decade, the development of quality assurance in Chinese higher education has covered a broad spectrum of…

  16. References on EPA Quality Assurance Project Plans

    EPA Pesticide Factsheets

    Provides requirements for the conduct of quality management practices, including quality assurance (QA) and quality control (QC) activities, for all environmental data collection and environmental technology programs performed by or for this Agency.

  17. [Quality and quality assurance, a European problem].

    PubMed

    Schmitt, H

    1994-01-01

    The problem of quality and quality assurance for the free exchange of blood and blood products in Europe is discussed. The background of all discussion of quality is the categorical theory of Aristoteles. The philosophical basis is described. The fundamental law of the daily work of a blood center has to be a philosophy of quality which depends on the sociodemographic situation in the region. This basic varies from country to country in Europe. The importance of the supranational bodies in Europe is mentioned. The weightness of the Code of Ethics is discussed. Virus safety, purity and validity of blood and blood products are described as parameters of the quality aspects. Finally it is confirmed that a well running blood program is a multicategorical problem.

  18. Quality assurance of monoclonal antibody pharmaceuticals based on their charge variants using microchip isoelectric focusing method.

    PubMed

    Kinoshita, Mitsuhiro; Nakatsuji, Yuki; Suzuki, Shigeo; Hayakawa, Takao; Kakehi, Kazuaki

    2013-09-27

    Monoclonal antibody (mAb) pharmaceuticals are much more complex than small-molecule drugs. Such complex characteristics raise challenging questions for regulatory evaluation. Although heterogeneity in mAbs based on their charge variants has been mainly evaluated using gel-based isoelectric focusing (IEF) method, recent development in capillary electrophoresis and microchip electrophoresis has made it possible to assure their heterogeneities in more easy and rapid manner. In the present paper, we customized the imaged microchip isoelectric focusing (mIEF) for the analysis of mAbs, and compared the customized version with the conventional capillary isoelectric focusing (cIEF) method, and found that mIEF has much higher performance in operations, and its resolving powers are comparable with those obtained by cIEF.

  19. Quality Assurance of E-learning. ENQA Workshop Report 14

    ERIC Educational Resources Information Center

    Grifoll, Josep; Huertas, Esther; Prades, Anna; Rodriguez, Sebastian; Rubin, Yuri; Mulder, Fred; Ossiannilsson, Ebba

    2010-01-01

    E-learning in the European Higher Education Area has stampeded its way to the foreground of the Quality Assurance (QA) forum, and has become a key issue among quality assurance agencies and institutions in the European Higher Education Area (EHEA). Because internet-based learning is currently such a relevant topic, there is a dire need for the…

  20. Quality assurance of absorbed energy in Charpy impact test

    NASA Astrophysics Data System (ADS)

    Rocha, C. L. F.; Fabricio, D. A. K.; Costa, V. M.; Reguly, A.

    2016-07-01

    In order to ensure the quality assurance and comply with standard requirements, an intralaboratory study has been performed for impact Charpy tests, involving two operators. The results based on ANOVA (Analysis of Variance) and Normalized Error statistical techniques pointed out that the execution of the tests is appropriate, because the implementation of quality assurance methods showed acceptable results.

  1. DEMONSTRATION AND QUALITY ASSURANCE PROJECT ...

    EPA Pesticide Factsheets

    The demonstration of technologies for determining the presence of dioxin in soil and sediment is being conducted under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in Saginaw, Michigan, at Green Point Environmental Learning Center from approximately April 26 to May 6, 2004. The primary purpose of the demonstration is to evaluate innovative monitoring technologies. The technologies listed below will be demonstrated. .AhRC PCRTM Kit, Hybrizyme Corporation .Ah-IMMUNOASSY@ Kit, Paralsian, Inc. .Coplanar PCB Immunoassay Kit, Abraxis LLC .DF-l Dioxin/Furan Immunoassay Kit, CAPE Technologies L.L.C. .CALUX@ by Xenobiotic Detection Systems, Inc- .Dioxin ELISA Kit, Wako Pure Chemical Industries LTD. This demonstration plan describes the procedures that will be used to verify the performance and cost of these technologies. The plan incorporates the quality assurance and quality control elements needed to generate data of sufficient quality to document each technology's performance and cost. A separate innovative technology verification report (ITVR) will.be prepared for each technology. The ITVRs will present the demonstration findings associated with the demonstration objectives. The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented performance and cost data obtained from field demonstrations.

  2. Quality assurance in film radiography

    SciTech Connect

    Van Bellegem, L.; Vaessen, B.

    1993-12-31

    The ISO 9000 standards were originally developed during the 1980`s to provide uniform, worldwide quality assurance requirements. The EC (European Communities) adopted these standards as part of their modular approach to ``conformity assessment`` procedures, for several product categories. This includes the development of standards (specifications) which define what the purchaser wants and what the supplier agrees to provide, as well as quality system registration (certification) which increases confidence in the supplier`s ability to produce consistently. The requirements are typically most rigorous for regulated products that have a major impact on health and safety i.e film radiographic systems. This is the main reason for making available the necessary Q.C. tools in film radiography to comply with Q.A. specifications and guarantee the required consistent performance. These tools can only give satisfying support if they are dedicated, easy to use, precise and cost effective at the user`s level. The main topics for such a Q.A. package are: (1) standard for Film System classification for industrial radiography; (2) film system certification; and (3) standard for control of film processing by means of reference values i.e. pre-exposed film wedges and archiving quality control method.

  3. DEMONSTRATION AND QUALITY ASSURANCE PROJECT ...

    EPA Pesticide Factsheets

    A demonstration of field portable/mobile technologies for measuring trace elements in soil and sediments was conducted under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation (SITE) Program. The demonstration took place from January 24 to 28, 2005, at the Kennedy Athletic, Recreational and Social Park at Kennedy Space Center on Merritt Island, Florida. The purpose of the demonstration was to verify the performance of various instruments that employ X-ray fluorescence (XRF) measurement technologies for the determination of 13 toxic elements in a variety of soil and sediment samples. Instruments from the technology developers listed below were demonstrated. o Innov-X Systems, Inc.o NITON LLC (2 instruments ) o Oxford Instruments Portable Division (formerly Metorex, Inc.) .Oxford Instruments Analytical .Rigaku, Inc.o RONTEC USA Inc.o Xcalibur XRF Services Inc. (Division of Elvatech Ltd. ) This demonstration plan describes the procedures that will be used to verify the performance and cost of the XRF instruments provided by these technology developers. The plan incorporates the quality assurance and quality control elements needed to generate data of sufficient quality to perform this verification. A separate innovative technology verification report (ITVR) will be prepared for each instrument. The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented perfor

  4. Web-Based Quality Assurance Process Drives Improvements in Obstetric Ultrasound in 5 Low- and Middle-Income Countries

    PubMed Central

    Swanson, Jonathan O; Plotner, David; Franklin, Holly L; Swanson, David L; Lokomba Bolamba, Victor; Lokangaka, Adrien; Sayury Pineda, Irma; Figueroa, Lester; Garces, Ana; Muyodi, David; Esamai, Fabian; Kanaiza, Nancy; Mirza, Waseem; Naqvi, Farnaz; Saleem, Sarah; Mwenechanya, Musaku; Chiwila, Melody; Hamsumonde, Dorothy; McClure, Elizabeth M; Goldenberg, Robert L; Nathan, Robert O

    2016-01-01

    ABSTRACT High quality is important in medical imaging, yet in many geographic areas, highly skilled sonographers are in short supply. Advances in Internet capacity along with the development of reliable portable ultrasounds have created an opportunity to provide centralized remote quality assurance (QA) for ultrasound exams performed at rural sites worldwide. We sought to harness these advances by developing a web-based tool to facilitate QA activities for newly trained sonographers who were taking part in a cluster randomized trial investigating the role of limited obstetric ultrasound to improve pregnancy outcomes in 5 low- and middle-income countries. We were challenged by connectivity issues, by country-specific needs for website usability, and by the overall need for a high-throughput system. After systematically addressing these needs, the resulting QA website helped drive ultrasound quality improvement across all 5 countries. It now offers the potential for adoption by future ultrasound- or imaging-based global health initiatives. PMID:28031304

  5. Professionalism, Profession and Quality Assurance Practitioners in External Quality Assurance Agencies in Higher Education

    ERIC Educational Resources Information Center

    Cheung, Jordan C. M.

    2015-01-01

    This article seeks to spark a dialectic discussion on the establishment of a set of professional competencies for quality assurance practitioners who serve in external quality assurance agencies in higher education. Such a need is identified due to the shortage of relevant and sufficient coverage in the quality assurance literature. To…

  6. Exploring Quality Assurance in Sixth Form Colleges

    ERIC Educational Resources Information Center

    Stoten, David William

    2012-01-01

    Purpose: This paper aims to focus on the changing nature of quality assurance systems within the sixth form college sector. Design/methodology/approach: Ten sixth form colleges were surveyed across England and staff from varying levels within college hierarchies questioned about how quality assurance systems were implemented. Research involved…

  7. Teacher Reaction to ICP Quality Assurance Procedures.

    ERIC Educational Resources Information Center

    Leonard, Ann

    An integral part of the Quality Assurance Manual developed by Southwest Regional Laboratory (SWRL) to accompany the Kindergarten Program is the end-of-program assessment of the Instructional Concepts Program (ICP). Following completion of ICP Quality Assurance assessment, four teachers were interviewed in order to gather information pertinent to…

  8. 30 CFR 15.8 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Quality assurance. 15.8 Section 15.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... § 15.8 Quality assurance. (a) Applicants granted an approval or an extension of approval under...

  9. 7 CFR 652.7 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 6 2011-01-01 2011-01-01 false Quality assurance. 652.7 Section 652.7 Agriculture... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.7 Quality assurance. (a) NRCS will review, in consultation with the Farm Service Agency, as appropriate, the...

  10. 30 CFR 7.7 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Quality assurance. 7.7 Section 7.7 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY General § 7.7 Quality assurance. Applicants...

  11. 30 CFR 14.8 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Quality assurance. 14.8 Section 14.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... Quality assurance. Applicants granted an approval or an extension of approval under this Part must: (a)...

  12. 30 CFR 15.8 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Quality assurance. 15.8 Section 15.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... § 15.8 Quality assurance. (a) Applicants granted an approval or an extension of approval under...

  13. 30 CFR 7.7 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Quality assurance. 7.7 Section 7.7 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY General § 7.7 Quality assurance. Applicants...

  14. 30 CFR 15.8 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Quality assurance. 15.8 Section 15.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... § 15.8 Quality assurance. (a) Applicants granted an approval or an extension of approval under...

  15. 7 CFR 652.7 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 6 2013-01-01 2013-01-01 false Quality assurance. 652.7 Section 652.7 Agriculture... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.7 Quality assurance. (a) NRCS will review, in consultation with the Farm Service Agency, as appropriate, the...

  16. 48 CFR 2453.246 - Quality Assurance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Quality Assurance. 2453.246 Section 2453.246 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT CLAUSES AND FORMS FORMS Prescription of Forms 2453.246 Quality Assurance....

  17. 30 CFR 15.8 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Quality assurance. 15.8 Section 15.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... § 15.8 Quality assurance. (a) Applicants granted an approval or an extension of approval under...

  18. 30 CFR 15.8 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Quality assurance. 15.8 Section 15.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... § 15.8 Quality assurance. (a) Applicants granted an approval or an extension of approval under...

  19. 7 CFR 652.7 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Quality assurance. 652.7 Section 652.7 Agriculture... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.7 Quality assurance. (a) NRCS will review, in consultation with the Farm Service Agency, as appropriate, the...

  20. 30 CFR 14.8 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Quality assurance. 14.8 Section 14.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... Quality assurance. Applicants granted an approval or an extension of approval under this Part must: (a)...

  1. 48 CFR 2453.246 - Quality Assurance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Quality Assurance. 2453.246 Section 2453.246 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT CLAUSES AND FORMS FORMS Prescription of Forms 2453.246 Quality Assurance....

  2. 30 CFR 7.7 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Quality assurance. 7.7 Section 7.7 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY General § 7.7 Quality assurance. Applicants...

  3. 7 CFR 652.7 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 6 2014-01-01 2014-01-01 false Quality assurance. 652.7 Section 652.7 Agriculture... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.7 Quality assurance. (a) NRCS will review, in consultation with the Farm Service Agency, as appropriate, the...

  4. 7 CFR 652.7 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 6 2012-01-01 2012-01-01 false Quality assurance. 652.7 Section 652.7 Agriculture... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.7 Quality assurance. (a) NRCS will review, in consultation with the Farm Service Agency, as appropriate, the...

  5. 30 CFR 7.7 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Quality assurance. 7.7 Section 7.7 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY General § 7.7 Quality assurance. Applicants...

  6. 30 CFR 7.7 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Quality assurance. 7.7 Section 7.7 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY General § 7.7 Quality assurance. Applicants...

  7. 48 CFR 2453.246 - Quality Assurance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Quality Assurance. 2453.246 Section 2453.246 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT CLAUSES AND FORMS FORMS Prescription of Forms 2453.246 Quality Assurance....

  8. 48 CFR 2453.246 - Quality Assurance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Quality Assurance. 2453.246 Section 2453.246 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT CLAUSES AND FORMS FORMS Prescription of Forms 2453.246 Quality Assurance....

  9. 48 CFR 2453.246 - Quality Assurance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Quality Assurance. 2453.246 Section 2453.246 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT CLAUSES AND FORMS FORMS Prescription of Forms 2453.246 Quality Assurance....

  10. 30 CFR 14.8 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Quality assurance. 14.8 Section 14.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... Quality assurance. Applicants granted an approval or an extension of approval under this Part must: (a)...

  11. 30 CFR 14.8 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Quality assurance. 14.8 Section 14.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... Quality assurance. Applicants granted an approval or an extension of approval under this Part must: (a)...

  12. Quality assurance manual: Volume 2, Appendices

    SciTech Connect

    Oijala, J.E.

    1988-06-01

    This paper contains quality assurance information on departments of the Stanford Linear Accelerator Center. Particular quality assurance policies and standards discussed are on: Mechanical Systems; Klystron and Microwave Department; Electronics Department; Plant Engineering; Accelerator Department; Purchasing; and Experimental Facilities Department. (LSP)

  13. Quality Assurance Reconsidered: A Case Study

    ERIC Educational Resources Information Center

    Gynnild, Vidar

    2007-01-01

    This article examines an external evaluation of the quality assurance system at the Norwegian University of Science and Technology (NTNU) conducted by The Norwegian Agency for Quality Assurance in Higher Education (NOKUT). The external audit report along with internal reports provided by the seven faculties of the university served as the major…

  14. Quality Assurance in Sub-Saharan Africa

    ERIC Educational Resources Information Center

    Materu, Peter; Righetti, Petra

    2010-01-01

    This article assesses the status and practice of higher education quality assurance in sub-Saharan Africa, focusing on degree-granting tertiary institutions. A main finding is that structured national-level quality assurance processes in African higher education are a very recent phenomenon and that most countries face major capacity constraints.…

  15. Ontario's Quality Assurance Framework: A Critical Response

    ERIC Educational Resources Information Center

    Heap, James

    2013-01-01

    Ontario's Quality Assurance Framework (QAF) is reviewed and found not to meet all five criteria proposed for a strong quality assurance system focused on student learning. The QAF requires a statement of student learning outcomes and a method and means of assessing those outcomes, but it does not require that data on achievement of intended…

  16. Evaluation of Quality Assurance Programs for Externships.

    ERIC Educational Resources Information Center

    Ruskiewicz, Joseph

    1982-01-01

    The procedures of the Pennsylvania College of Optometry's Office of External Educational Programs are reviewed to show how quality assurance techniques can be categorized. The format was designed to evaluate quality assurance procedures for both the educational and service aspects of eye care. (MLW)

  17. Apollo experience report: Reliability and quality assurance

    NASA Technical Reports Server (NTRS)

    Sperber, K. P.

    1973-01-01

    The reliability of the Apollo spacecraft resulted from the application of proven reliability and quality techniques and from sound management, engineering, and manufacturing practices. Continual assessment of these techniques and practices was made during the program, and, when deficiencies were detected, adjustments were made and the deficiencies were effectively corrected. The most significant practices, deficiencies, adjustments, and experiences during the Apollo Program are described in this report. These experiences can be helpful in establishing an effective base on which to structure an efficient reliability and quality assurance effort for future space-flight programs.

  18. Quality Assurance Planning for Region 6

    EPA Pesticide Factsheets

    The ultimate success of an environmental program or project depends on the quality of the environmental data collected and used in decision-making. EPA has developed guidances to help state and tribal governments develop Quality Assurance Program Plans.

  19. The Concepts of Quality, Quality Assurance and Quality Enhancement

    ERIC Educational Resources Information Center

    Elassy, Noha

    2015-01-01

    Purpose: This paper aims to critically review and discuss different definitions of the concepts of quality, quality assurance (QA) and quality enhancement (QE) in higher education (HE) with presenting critical perspectives of the literature. Design/methodology/approach: The paper looks at literature concerns with the meaning of quality, QA and QE,…

  20. Training, Quality Assurance Factors, and Tools Investigation: a Work Report and Suggestions on Software Quality Assurance

    NASA Technical Reports Server (NTRS)

    Lee, Pen-Nan

    1991-01-01

    Previously, several research tasks have been conducted, some observations were obtained, and several possible suggestions have been contemplated involving software quality assurance engineering at NASA Johnson. These research tasks are briefly described. Also, a brief discussion is given on the role of software quality assurance in software engineering along with some observations and suggestions. A brief discussion on a training program for software quality assurance engineers is provided. A list of assurance factors as well as quality factors are also included. Finally, a process model which can be used for searching and collecting software quality assurance tools is presented.

  1. Automating linear accelerator quality assurance

    SciTech Connect

    Eckhause, Tobias; Thorwarth, Ryan; Moran, Jean M.; Al-Hallaq, Hania; Farrey, Karl; Ritter, Timothy; DeMarco, John; Pawlicki, Todd; Kim, Gwe-Ya; Popple, Richard; Sharma, Vijeshwar; Park, SungYong; Perez, Mario; Booth, Jeremy T.

    2015-10-15

    Purpose: The purpose of this study was 2-fold. One purpose was to develop an automated, streamlined quality assurance (QA) program for use by multiple centers. The second purpose was to evaluate machine performance over time for multiple centers using linear accelerator (Linac) log files and electronic portal images. The authors sought to evaluate variations in Linac performance to establish as a reference for other centers. Methods: The authors developed analytical software tools for a QA program using both log files and electronic portal imaging device (EPID) measurements. The first tool is a general analysis tool which can read and visually represent data in the log file. This tool, which can be used to automatically analyze patient treatment or QA log files, examines the files for Linac deviations which exceed thresholds. The second set of tools consists of a test suite of QA fields, a standard phantom, and software to collect information from the log files on deviations from the expected values. The test suite was designed to focus on the mechanical tests of the Linac to include jaw, MLC, and collimator positions during static, IMRT, and volumetric modulated arc therapy delivery. A consortium of eight institutions delivered the test suite at monthly or weekly intervals on each Linac using a standard phantom. The behavior of various components was analyzed for eight TrueBeam Linacs. Results: For the EPID and trajectory log file analysis, all observed deviations which exceeded established thresholds for Linac behavior resulted in a beam hold off. In the absence of an interlock-triggering event, the maximum observed log file deviations between the expected and actual component positions (such as MLC leaves) varied from less than 1% to 26% of published tolerance thresholds. The maximum and standard deviations of the variations due to gantry sag, collimator angle, jaw position, and MLC positions are presented. Gantry sag among Linacs was 0.336 ± 0.072 mm. The

  2. Quality management system for application of the analytical quality assurance cycle in a research project

    NASA Astrophysics Data System (ADS)

    Camargo, R. S.; Olivares, I. R. B.

    2016-07-01

    The lack of quality assurance and quality control in academic activities have been recognized by the inability to demonstrate reproducibility. This paper aim to apply a quality tool called Analytical Quality Assurance Cycle on a specific research project, supported by a Verification Programme of equipment and an adapted Quality Management System based on international standards, to provide traceability to the data generated.

  3. Toward an evidence-based system for innovation support for implementing innovations with quality: tools, training, technical assistance, and quality assurance/quality improvement.

    PubMed

    Wandersman, Abraham; Chien, Victoria H; Katz, Jason

    2012-12-01

    An individual or organization that sets out to implement an innovation (e.g., a new technology, program, or policy) generally requires support. In the Interactive Systems Framework for Dissemination and Implementation, a Support System should work with Delivery Systems (national, state and/or local entities such as health and human service organizations, community-based organizations, schools) to enhance their capacity for quality implementation of innovations. The literature on the Support System [corrected] has been underresearched and under-developedThis article begins to conceptualize theory, research, and action for an evidence-based system for innovation support (EBSIS). EBSIS describes key priorities for strengthening the science and practice of support. The major goal of EBSIS is to enhance the research and practice of support in order to build capacity in the Delivery System for implementing innovations with quality, and thereby, help the Delivery System achieve outcomes. EBSIS is guided by a logic model that includes four key support components: tools, training, technical assistance, and quality assurance/quality improvement. EBSIS uses the Getting To Outcomes approach to accountability to aid the identification and synthesis of concepts, tools, and evidence for support. We conclude with some discussion of the current status of EBSIS and possible next steps, including the development of collaborative researcher-practitioner-funder-consumer partnerships to accelerate accumulation of knowledge on the Support System.

  4. SWiFT Software Quality Assurance Plan.

    SciTech Connect

    Berg, Jonathan Charles

    2016-01-01

    This document describes the software development practice areas and processes which contribute to the ability of SWiFT software developers to provide quality software. These processes are designed to satisfy the requirements set forth by the Sandia Software Quality Assurance Program (SSQAP). APPROVALS SWiFT Software Quality Assurance Plan (SAND2016-0765) approved by: Department Manager SWiFT Site Lead Dave Minster (6121) Date Jonathan White (6121) Date SWiFT Controls Engineer Jonathan Berg (6121) Date CHANGE HISTORY Issue Date Originator(s) Description A 2016/01/27 Jon Berg (06121) Initial release of the SWiFT Software Quality Assurance Plan

  5. 48 CFR 37.604 - Quality assurance surveillance plans.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Quality assurance... assurance surveillance plans. Requirements for quality assurance and quality assurance surveillance plans are in Subpart 46.4. The Government may either prepare the quality assurance surveillance plan...

  6. Surviving or thriving: quality assurance mechanisms to promote innovation in the development of evidence-based parenting interventions.

    PubMed

    Sanders, Matthew R; Kirby, James N

    2015-04-01

    Parenting interventions have the potential to make a significant impact to the prevention and treatment of major social and mental health problems of children. However, parenting interventions fail to do so because program developers pay insufficient attention to the broader ecological context that influences the adoption and implementation of evidence-based interventions. This context includes the professional and scientific community, end users, consumers, and broader sociopolitical environment within which parenting services are delivered. This paper presents an iterative stage model of quality assurance steps to guide ongoing research and development particularly those related to program innovations including theory building, intervention development, pilot testing, efficacy and effectiveness trials, program refinement, dissemination, and planning for implementation and political advocacy. The key challenges associated with each phase of the research and development process are identified. Stronger consumer participation throughout the entire process from initial program design to wider community dissemination is an important, but an often ignored part of the process. Specific quality assurance mechanisms are discussed that increase accountability, professional, and consumer confidence in an intervention and the evidence supporting its efficacy.

  7. SAPHIRE 8 Software Quality Assurance Oversight

    SciTech Connect

    Kurt G. Vedros

    2011-09-01

    The software quality assurance oversight consists of updating and maintaining revision control of the SAPHIRE 8 quality assurance program documentation and of monitoring revision control of the SAPHIRE 8 source code. This report summarizes the oversight efforts through description of the revision control system (RCS) setup, operation and contents. Documents maintained under revision control include the Acceptance Test Plan (ATP), Configuration Management Plan, Quality Assurance Plan, Software Project Plan, Requirements Traceability Matrix (RTM), System Test Plan, SDP Interface Training Manual, and the SAPHIRE 8, 'New Features and Capabilities Overview'.

  8. Assuring quality in high-consequence engineering

    SciTech Connect

    Hoover, Marcey L.; Kolb, Rachel R.

    2014-03-01

    In high-consequence engineering organizations, such as Sandia, quality assurance may be heavily dependent on staff competency. Competency-dependent quality assurance models are at risk when the environment changes, as it has with increasing attrition rates, budget and schedule cuts, and competing program priorities. Risks in Sandia's competency-dependent culture can be mitigated through changes to hiring, training, and customer engagement approaches to manage people, partners, and products. Sandia's technical quality engineering organization has been able to mitigate corporate-level risks by driving changes that benefit all departments, and in doing so has assured Sandia's commitment to excellence in high-consequence engineering and national service.

  9. Principles and Practices for Quality Assurance and Quality Control

    USGS Publications Warehouse

    Jones, Berwyn E.

    1999-01-01

    Quality assurance and quality control are vital parts of highway runoff water-quality monitoring projects. To be effective, project quality assurance must address all aspects of the project, including project management responsibilities and resources, data quality objectives, sampling and analysis plans, data-collection protocols, data quality-control plans, data-assessment procedures and requirements, and project outputs. Quality control ensures that the data quality objectives are achieved as planned. The historical development and current state of the art of quality assurance and quality control concepts described in this report can be applied to evaluation of data from prior projects.

  10. Quality assurance in UK higher education

    NASA Astrophysics Data System (ADS)

    Shrimplin, Valerie

    Quality Assurance methods are becoming increasingly well known as systems applicable in business, commerce and industry. In modified form, such concepts can be applied to higher education and, in the UK, quality systems are utilized in universities in order to ensure the quality of provision and standards of awards. Similar principles may also be applied to the evaluation of quality in research.

  11. 40 CFR 51.363 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... impede program performance. The quality assurance and quality control procedures shall be periodically...) Equipment audits. During overt site visits, auditors shall conduct quality control evaluations of the... at least as accurate as those required for regular equipment quality control and comparing...

  12. 40 CFR 51.363 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... impede program performance. The quality assurance and quality control procedures shall be periodically...) Equipment audits. During overt site visits, auditors shall conduct quality control evaluations of the... at least as accurate as those required for regular equipment quality control and comparing...

  13. 40 CFR 136.7 - Quality assurance and quality control.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 23 2014-07-01 2014-07-01 false Quality assurance and quality control... assurance and quality control. The permittee/laboratory shall use suitable QA/QC procedures when conducting... quality control elements, where applicable, into the laboratory's documented standard operating...

  14. 40 CFR 136.7 - Quality assurance and quality control.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 24 2012-07-01 2012-07-01 false Quality assurance and quality control... assurance and quality control. The permittee/laboratory shall use suitable QA/QC procedures when conducting... quality control elements, where applicable, into the laboratory's documented standard operating...

  15. 40 CFR 136.7 - Quality assurance and quality control.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 24 2013-07-01 2013-07-01 false Quality assurance and quality control... assurance and quality control. The permittee/laboratory shall use suitable QA/QC procedures when conducting... quality control elements, where applicable, into the laboratory's documented standard operating...

  16. The Columbia River Protection Supplemental Technologies Quality Assurance Project Plan

    SciTech Connect

    Fix, N. J.

    2007-01-10

    The U.S. Department of Energy (DOE) has conducted interim groundwater remedial activities on the Hanford Site since the mid-1990s for several groundwater contamination plumes. DOE established the Columbia River Protection Supplemental Technologies Project (Technologies Project) in 2006 to evaluate alternative treatment technologies. The objectives for the technology project are as follows: develop a 300 Area polyphosphate treatability test to immobilize uranium, design and test infiltration of a phosphate/apatite technology for Sr-90 at 100-N, perform carbon tetrachloride and chloroform attenuation parameter studies, perform vadose zone chromium characterization and geochemistry studies, perform in situ biostimulation of chromium studies for a reducing barrier at 100-D, and perform a treatability test for phytoremediation for Sr-90 at 100-N. This document provides the quality assurance guidelines that will be followed by the Technologies Project. This Quality Assurance Project Plan is based on the quality assurance requirements of DOE Order 414.1C, Quality Assurance, and 10 CFR 830, Subpart A--Quality Assurance Requirements as delineated in Pacific Northwest National Laboratory’s Standards-Based Management System. In addition, the technology project is subject to the Environmental Protection Agency (EPA) Requirements for Quality Assurance Project Plans (EPA/240/B-01/003, QA/R-5). The Hanford Analytical Services Quality Assurance Requirements Documents (HASQARD, DOE/RL-96-68) apply to portions of this project and to the subcontractors. HASQARD requirements are discussed within applicable sections of this plan.

  17. Annual Quality Assurance Conference Abstracts by Barbara Marshik

    EPA Pesticide Factsheets

    25th Annual Quality Assurance Conference. Abstracts: Material and Process Conditions for Successful Use of Extractive Sampling Techniques and Certification Methods Errors in the Analysis of NMHC and VOCs in CNG-Based Engine Emissions by Barbara Marshik

  18. Quality Assurance Project Plan Development Tool

    EPA Pesticide Factsheets

    This tool contains information designed to assist in developing a Quality Assurance (QA) Project Plan that meets EPA requirements for projects that involve surface or groundwater monitoring and/or the collection and analysis of water samples.

  19. [Health care quality assurance in the Netherlands].

    PubMed

    Reerink, E

    1990-01-01

    In this paper the main structural features of the dutch health system are described, together with a historical survey of its development in recent years. The basic elements of quality assurance in the country are also discussed.

  20. 40 CFR 31.45 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ADMINISTRATIVE REQUIREMENTS FOR GRANTS AND COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Reports, Records, Retention, and Enforcement § 31.45 Quality assurance. If the grantee's...

  1. 40 CFR 31.45 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ADMINISTRATIVE REQUIREMENTS FOR GRANTS AND COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS Post-Award Requirements Reports, Records, Retention, and Enforcement § 31.45 Quality assurance. If the grantee's...

  2. Quality assurance program for isotopic power systems

    NASA Astrophysics Data System (ADS)

    Hannigan, R. L.; Harnar, R. R.

    1982-12-01

    The Sandia National Laboratories Quality Assurance Program that applies to non-weapon (reimbursable) Radioisotopic Thermoelectric Generators is summarized. The program was implemented over the past 16 years on power supplies used in various space and terrestrial systems. The quality assurance (QA) activity of the program is in support of the Department of Energy, Office of Space Nuclear Projects. Basic elements of the program are described and examples of program documentation are presented.

  3. Quality assurance program for isotopic power systems

    SciTech Connect

    Hannigan, R.L.; Harnar, R.R.

    1982-12-01

    This report summarizes the Sandia National Laboratories Quality Assurance Program that applies to non-weapon (reimbursable) Radioisotopic Thermoelectric Generators. The program has been implemented over the past 16 years on power supplies used in various space and terrestrial systems. The quality assurance (QA) activity of the program is in support of the Department of Energy, Office of Space Nuclear Projects. Basic elements of the program are described in the report and examples of program decumentation are presented.

  4. Development of a team-based method for assuring the quality of assistive technology documentation.

    PubMed

    Desideri, Lorenzo; Ioele, Francesca Marcella; Roentgen, Uta; Gelderblom, Gert-Jan; De Witte, Luc

    2014-01-01

    Good practice in assistive technology (AT) service delivery targeting children with disabilities has come increasingly to include providing AT stakeholders with a final text record that documents the rationale and procedures behind the recommendations made during the AT assessment process (AT documentation). In the present case study of one AT service provider, we developed a team-based approach for conducting an evaluation of the quality of the AT documentation. A service-specific scale for the evaluation of AT documentation was developed following a five-step approach. The scale was employed to'review AT documentation utilizing specific review criteria in order to evaluate the quality of AT documentation practices with regard to the service investigated. Two independent reviewers examined the AT documentation for 130 cases of AT service provision. Weighted kappa and Intraclass correlation coefficients (ICC) were employed as a measure of inter-rater agreement. The results of the documentation evaluation allowed AT professionals to objectively assess the quality of the AT documentation produced by the service under investigation, identify shortcomings in the documentation process, and make related corrections. AT services may benefit from the employment of strategic approaches for the evaluation of service provision. Possible applications to other AT service providers are discussed.

  5. 10 CFR 71.101 - Quality assurance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... perform satisfactorily in service. Quality assurance includes quality control, which comprises those... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance requirements. 71.101 Section 71.101... Quality Assurance § 71.101 Quality assurance requirements. (a) Purpose. This subpart describes...

  6. Transuranic Waste Characterization Quality Assurance Program Plan

    SciTech Connect

    1995-04-30

    This quality assurance plan identifies the data necessary, and techniques designed to attain the required quality, to meet the specific data quality objectives associated with the DOE Waste Isolation Pilot Plant (WIPP). This report specifies sampling, waste testing, and analytical methods for transuranic wastes.

  7. Promoting the Implementation of an Evidence-Based Intervention for Adolescent Marijuana Abuse in Community Settings: Testing the Use of Intensive Quality Assurance

    ERIC Educational Resources Information Center

    Henggeler, Scott W.; Sheidow, Ashli J.; Cunningham, Phillippe B.; Donohue, Bradley C.; Ford, Julian D.

    2008-01-01

    The development and evaluation of effective strategies for transporting evidence-based practices to community-based clinicians has become a research and policy priority. Using multisystemic therapy programs as a platform, an experimental design examined the capacity of an Intensive Quality Assurance (IQA) system to promote therapist implementation…

  8. Dental technicians: regulation and quality assurance.

    PubMed

    Newsome, P R H

    2011-01-08

    For many years, dental technicians were largely self-regulated and left to work without any undue interference from, or legislation by, outside authorities. This situation has changed somewhat dramatically in recent years, primarily as a result of a) mandatory General Dental Council (GDC) registration of UK-based dental technicians and b) the requirement to comply with certain EC directives governing the provision of dental appliances. There seems to be some confusion, however, about these various changes and the ensuing ramifications for dental practitioners. The purpose of this paper is firstly to clarify the various regulatory issues currently surrounding technician registration and the provision of laboratory work ('Made in Britain' or otherwise) and secondly to explore the various internationally-recognised quality assurance standards that can be applied to the production of such work in order to assist dentists in gauging quality-related claims made by dental laboratories, both in the UK and overseas.

  9. Quality Assurance/Quality Control Jobs

    NASA Astrophysics Data System (ADS)

    Fanslau, Melody; Young, Janelle

    The production of a quality and safe food product is essential to the success of any food manufacturing facility. Because of this great importance, a career in quality can be extremely rewarding. Without happy customers willing to buy a product, a company would not be able to survive. Quality issues such as foreign objects, spoiled or mislabeled product, failure to meet net weight requirements, or a recall can all turn customers away from buying a product. The food industry is a customer-driven market in which some consumers are brand loyal based on a history of high quality or in which a single bad experience with a product will turn them away for a lifetime. With this said, the main role of a quality department is to help ensure that quality issues such as these are eliminated or kept to a minimum to maintain or increase the number of customers purchasing their product.

  10. Automated Quality Assurance of Online NIR Analysers

    PubMed Central

    Aaljoki, Kari

    2005-01-01

    Modern NIR analysers produce valuable data for closed-loop process control and optimisation practically in real time. Thus it is highly important to keep them in the best possible shape. Quality assurance (QA) of NIR analysers is an interesting and complex issue because it is not only the instrument and sample handling that has to be monitored. At the same time, validity of prediction models has to be assured. A system for fully automated QA of NIR analysers is described. The system takes care of collecting and organising spectra from various instruments, relevant laboratory, and process management system (PMS) data. Validation of spectra is based on simple diagnostics values derived from the spectra. Predictions are validated against laboratory (LIMS) or other online analyser results (collected from PMS). The system features automated alarming, reporting, trending, and charting functions for major key variables for easy visual inspection. Various textual and graphical reports are sent to maintenance people through email. The software was written with Borland Delphi 7 Enterprise. Oracle and PMS ODBC interfaces were used for accessing LIMS and PMS data using appropriate SQL queries. It will be shown that it is possible to take actions even before the quality of predictions is seriously affected, thus maximising the overall uptime of the instrument. PMID:18924628

  11. Automated Quality Assurance of Online NIR Analysers.

    PubMed

    Aaljoki, Kari

    2005-01-01

    Modern NIR analysers produce valuable data for closed-loop process control and optimisation practically in real time. Thus it is highly important to keep them in the best possible shape. Quality assurance (QA) of NIR analysers is an interesting and complex issue because it is not only the instrument and sample handling that has to be monitored. At the same time, validity of prediction models has to be assured. A system for fully automated QA of NIR analysers is described. The system takes care of collecting and organising spectra from various instruments, relevant laboratory, and process management system (PMS) data. Validation of spectra is based on simple diagnostics values derived from the spectra. Predictions are validated against laboratory (LIMS) or other online analyser results (collected from PMS). The system features automated alarming, reporting, trending, and charting functions for major key variables for easy visual inspection. Various textual and graphical reports are sent to maintenance people through email. The software was written with Borland Delphi 7 Enterprise. Oracle and PMS ODBC interfaces were used for accessing LIMS and PMS data using appropriate SQL queries. It will be shown that it is possible to take actions even before the quality of predictions is seriously affected, thus maximising the overall uptime of the instrument.

  12. 7 CFR 56.39 - Quality assurance inspector required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Quality assurance inspector required. 56.39 Section 56... Identified with Grademarks § 56.39 Quality assurance inspector required. The official identification with the... supervision of a grader or quality assurance inspector. The grader or quality assurance inspector shall...

  13. 7 CFR 90.102 - Quality assurance review.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Quality assurance review. 90.102 Section 90.102... INTRODUCTION Quality Assurance § 90.102 Quality assurance review. (a) Each laboratory performing tests and analysis under this subchapter will be subject to a quality assurance program evaluation at least...

  14. 7 CFR 56.39 - Quality assurance inspector required.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Quality assurance inspector required. 56.39 Section 56... Identified with Grademarks § 56.39 Quality assurance inspector required. The official identification with the... supervision of a grader or quality assurance inspector. The grader or quality assurance inspector shall...

  15. 7 CFR 90.102 - Quality assurance review.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Quality assurance review. 90.102 Section 90.102... INTRODUCTION Quality Assurance § 90.102 Quality assurance review. (a) Each laboratory performing tests and analysis under this subchapter will be subject to a quality assurance program evaluation at least...

  16. 7 CFR 56.39 - Quality assurance inspector required.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Quality assurance inspector required. 56.39 Section 56... Identified with Grademarks § 56.39 Quality assurance inspector required. The official identification with the... supervision of a grader or quality assurance inspector. The grader or quality assurance inspector shall...

  17. 16 CFR 1633.6 - Quality assurance requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Quality assurance requirements. 1633.6... STANDARD FOR THE FLAMMABILITY (OPEN FLAME) OF MATTRESS SETS The Standard § 1633.6 Quality assurance requirements. (a) Quality assurance. Each manufacturer shall implement a quality assurance program to...

  18. 23 CFR 637.207 - Quality assurance program.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false Quality assurance program. 637.207 Section 637.207... CONSTRUCTION INSPECTION AND APPROVAL Quality Assurance Procedures for Construction § 637.207 Quality assurance program. (a) Each STD's quality assurance program shall provide for an acceptance program and...

  19. 23 CFR 637.207 - Quality assurance program.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 23 Highways 1 2014-04-01 2014-04-01 false Quality assurance program. 637.207 Section 637.207... CONSTRUCTION INSPECTION AND APPROVAL Quality Assurance Procedures for Construction § 637.207 Quality assurance program. (a) Each STD's quality assurance program shall provide for an acceptance program and...

  20. Quality Assurance in American and British Higher Education: A Comparison.

    ERIC Educational Resources Information Center

    Stanley, Elizabeth C.; Patrick, William J.

    1998-01-01

    Compares quality improvement and accountability processes in the United States and United Kingdom. For the United Kingdom, looks at quality audits, institutional assessment, standards-based quality assurance, and research assessment; in the United States, looks at regional and specialized accreditation, performance indicator systems, academic…

  1. ENHANCING SCIENTIFIC COLLABORATION THROUGH QUALITY ASSURANCE

    EPA Science Inventory

    The basic features of the Quality Assurance Program have been in existence since the early 1980's, but this poster will highlight some topics that have emerged more recently, in particular the Agency's laboratory competency policy, the information quality guidelines, and scientif...

  2. Quality Assurance in University Guidance Services

    ERIC Educational Resources Information Center

    Simon, Alexandra

    2014-01-01

    In Europe there is no common quality assurance framework for the delivery of guidance in higher education. Using a case study approach in four university career guidance services in England, France and Spain, this article aims to study how quality is implemented in university career guidance services in terms of strategy, standards and models,…

  3. Quality Assurance in a Children's Psychiatric Hospital.

    ERIC Educational Resources Information Center

    Baggish, Rosemary C.; And Others

    1981-01-01

    Examined the use of short-term isolation (STI) in a children's psychiatric hospital. The Joint Commission on Accreditation of Hospitals quality assurance mode was used. Studied the quality use of STI and its documentation. Data gathered served as the basis for recommendations that led to planned, informed program changes. (Author)

  4. Quality Assurance in Distance Learning Libraries

    ERIC Educational Resources Information Center

    Tripathi, Manorama; Jeevan, V. K. J.

    2009-01-01

    Purpose: The paper aims to study how the present distance learning libraries can improve upon their existing services and introduce new ones to enhance quality of services to distance learners. Design/methodology/approach: The paper includes a review of literature on quality assurance in open and distance education in general and student support…

  5. Ensuring Quality Assurance in Vocational Education

    ERIC Educational Resources Information Center

    Idialu, Ethel E.

    2013-01-01

    Vocational education emphasises skill acquisition. Quality assurance in vocational education is a concept that is concerned with high performance involving activities with vocational education such as teaching, learning, infrastructures, students' behaviour and the entire academic process. Quality vocational education refers to input and output of…

  6. The New English Quality Assurance Regime

    ERIC Educational Resources Information Center

    Brown, Roger

    2011-01-01

    England is developing a new quality assurance regime that will come into effect in October 2011. A new funding regime will operate from the following year, together with new rules to ease the participation of private higher education providers. This article describes and analyses the new quality and funding regimes. It argues that the greater…

  7. A BPMN solution for chaining OGC services to quality assure location-based crowdsourced data

    NASA Astrophysics Data System (ADS)

    Meek, Sam; Jackson, Mike; Leibovici, Didier G.

    2016-02-01

    The Open Geospatial Consortium (OGC) Web Processing Service (WPS) standard enables access to a centralized repository of processes and services from compliant clients. A crucial part of the standard includes the provision to chain disparate processes and services to form a reusable workflow. To date this has been realized by methods such as embedding XML requests, using Business Process Execution Language (BPEL) engines and other external orchestration engines. Although these allow the user to define tasks and data artifacts as web services, they are often considered inflexible and complicated, often due to vendor specific solutions and inaccessible documentation. This paper introduces a new method of flexible service chaining using the standard Business Process Markup Notation (BPMN). A prototype system has been developed upon an existing open source BPMN suite to illustrate the advantages of the approach. The motivation for the software design is qualification of crowdsourced data for use in policy-making. The software is tested as part of a project that seeks to qualify, assure, and add value to crowdsourced data in a biological monitoring use case.

  8. The quality assurance role in the Deep Space Network

    NASA Technical Reports Server (NTRS)

    Sirpilla, R. L.

    1981-01-01

    The quality assurance section provides skilled personnel who perform the following functions: quality hardware engineering, quality software engineering, inspection and testing, and an independent assessment to quality, engineering and project requirements. The quality assurance section provides specifications, workmanship standards, process specifications and quality assurance procedures in support of DSN equipment. In addition, the quality assurance section reviews DSN engineering documents to ensure that appropriate and adequate quality provisions are included.

  9. HELIOS Critical Design Review: Quality Assurance

    NASA Technical Reports Server (NTRS)

    Benoehr, H. C.; Herholz, J.; Prem, H.; Mann, D.; Reichert, L.; Rupp, W.; Campbell, D.; Boettger, H.; Zerwes, G.; Kurvin, C.

    1972-01-01

    The following is an account of the activities of the Quality Assurance (QA) department of the project management office highlighting some of the ways in which it controls QA of the subcontractors on one hand and reports on Quality to GfW (Gesellschaft fur Weltraumforschung) on the other hand. The basic document prepared by MBB (Messerschmitt-Bolkow-Blohm) for QA activities is 1. The QA plan based on GfW 002. The QA department is responsible moreover for monitoring and making decisions about the quality of parts and materials and the governing document for this activity is 2. The Parts and Materials Control Plan based on GfW 001 - the reliability program provisions, as well as GfW 002. A brief survey of the contents of the QA Plan is shown. It should be noted that QA activity dealing with parts procurement is partially covered in a separate presentation entitled "Hi-Rel Parts". Supplementary quality documents are shown.

  10. RTOG quality assurance guidelines for interstitial hyperthermia.

    PubMed

    Emami, B; Stauffer, P; Dewhirst, M W; Prionas, S; Ryan, T; Corry, P; Herman, T; Kapp, D S; Myerson, R J; Samulski, T

    1991-05-01

    This document specifies the current recommendations for quality assurance for hyperthermia administration with interstitial techniques as specified by the Radiation Therapy Oncology Group (RTOG). The document begins by providing a brief description of the physical principles behind the use of the three most commonly used methods of interstitial hyperthermia: radiofrequency (RF-LCF), microwave antennas, and ferromagnetic seeds. Emphasis is placed on features that effect quality assurance. Specific recommendations are provided for: a) Pretreatment planning and equipment performance checks, b) Implant considerations and documentation, c) Thermometry, and d) Safety procedures. Specific details regarding quality assurance issues that are common to all local and regional hyperthermia methods are outlined in previous documents sponsored by the RTOG. It is anticipated that technological advances may lead to future modifications of this document.

  11. Cardiac catheterization laboratory imaging quality assurance program.

    PubMed

    Wondrow, M A; Laskey, W K; Hildner, F J; Cusma, J; Holmes, D R

    2001-01-01

    With the recent approval of the National Electrical Manufacturers Association (NEMA) standard for "Characteristics of and Test Procedures for a Phantom to Benchmark Cardiac Fluoroscopic and Photographic Performance," comprehensive cardiac image assurance control programs are now possible. This standard was developed by a joint NEMA/Society for Cardiac Angiography and Interventions (SCA&I) working group of imaging manufacturers and cardiology society professionals over the past 4 years. This article details a cardiac catheterization laboratory image quality assurance and control program that includes the new standard along with current regulatory requirements for cardiac imaging. Because of the recent proliferation of digital imaging equipment, quality assurance for cardiac imaging fluoroscopy and digital imaging are critical. Included are the previous works recommended by the American College of Cardiology (ACC) and American Heart Association (AHA), Society for Cardiac Angiographers and Interventions (SCA&I), and authors of previous image quality subjects.

  12. Utilizing a structural meta-ontology for family-based quality assurance of the BioPortal ontologies.

    PubMed

    Ochs, Christopher; He, Zhe; Zheng, Ling; Geller, James; Perl, Yehoshua; Hripcsak, George; Musen, Mark A

    2016-06-01

    An Abstraction Network is a compact summary of an ontology's structure and content. In previous research, we showed that Abstraction Networks support quality assurance (QA) of biomedical ontologies. The development of an Abstraction Network and its associated QA methodologies, however, is a labor-intensive process that previously was applicable only to one ontology at a time. To improve the efficiency of the Abstraction-Network-based QA methodology, we introduced a QA framework that uses uniform Abstraction Network derivation techniques and QA methodologies that are applicable to whole families of structurally similar ontologies. For the family-based framework to be successful, it is necessary to develop a method for classifying ontologies into structurally similar families. We now describe a structural meta-ontology that classifies ontologies according to certain structural features that are commonly used in the modeling of ontologies (e.g., object properties) and that are important for Abstraction Network derivation. Each class of the structural meta-ontology represents a family of ontologies with identical structural features, indicating which types of Abstraction Networks and QA methodologies are potentially applicable to all of the ontologies in the family. We derive a collection of 81 families, corresponding to classes of the structural meta-ontology, that enable a flexible, streamlined family-based QA methodology, offering multiple choices for classifying an ontology. The structure of 373 ontologies from the NCBO BioPortal is analyzed and each ontology is classified into multiple families modeled by the structural meta-ontology.

  13. 40 CFR 792.35 - Quality assurance unit.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 31 2010-07-01 2010-07-01 true Quality assurance unit. 792.35 Section... assurance unit. (a) A testing facility shall have a quality assurance unit which shall be responsible for... quality assurance unit shall be entirely separate from and independent of the personnel engaged in...

  14. Statistical process control for radiotherapy quality assurance.

    PubMed

    Pawlicki, Todd; Whitaker, Matthew; Boyer, Arthur L

    2005-09-01

    Every quality assurance process uncovers random and systematic errors. These errors typically consist of many small random errors and a very few number of large errors that dominate the result. Quality assurance practices in radiotherapy do not adequately differentiate between these two sources of error. The ability to separate these types of errors would allow the dominant source(s) of error to be efficiently detected and addressed. In this work, statistical process control is applied to quality assurance in radiotherapy for the purpose of setting action thresholds that differentiate between random and systematic errors. The theoretical development and implementation of process behavior charts are described. We report on a pilot project is which these techniques are applied to daily output and flatness/symmetry quality assurance for a 10 MV photon beam in our department. This clinical case was followed over 52 days. As part of our investigation, we found that action thresholds set using process behavior charts were able to identify systematic changes in our daily quality assurance process. This is in contrast to action thresholds set using the standard deviation, which did not identify the same systematic changes in the process. The process behavior thresholds calculated from a subset of the data detected a 2% change in the process whereas with a standard deviation calculation, no change was detected. Medical physicists must make decisions on quality assurance data as it is acquired. Process behavior charts help decide when to take action and when to acquire more data before making a change in the process.

  15. Technical note: preventive maintenance quality assurance.

    PubMed

    Russell, D

    1992-01-01

    Performance improvements in healthcare and, specifically, in clinical engineering are required by the Joint Commission on the Accreditation of Healthcare Organizations' Plant Technology and Safety Management (PTSM) documents. The goals of healthcare service quality assurance are to establish performance requirements and improve patient outcomes. It is important that these goals be kept in the forefront of the design of clinical engineering quality assurance planning. Indicator/threshold pairs must be carefully chosen on the basis of some logical relation to the desired goals of the overall program.

  16. Quality Assurance Source Requirements Traceability Database

    SciTech Connect

    MURTHY, R., NAYDENOVA, A., DEKLEVER, R., BOONE, A.

    2006-01-30

    At the Yucca Mountain Project the Project Requirements Processing System assists in the management of relationships between regulatory and national/industry standards source criteria, and Quality Assurance Requirements and Description document (DOE/R W-0333P) requirements to create compliance matrices representing respective relationships. The matrices are submitted to the U.S. Nuclear Regulatory Commission to assist in the commission's review, interpretation, and concurrence with the Yucca Mountain Project QA program document. The tool is highly customized to meet the needs of the Office of Civilian Radioactive Waste Management Office of Quality Assurance.

  17. The changing role of quality assurance in the pharmaceutical industry.

    PubMed

    Kieffer, Robert G

    2014-01-01

    ICH Q10. Pharmaceutical Quality System emphasizes that senior management is responsible for the quality system. Thus, it is not the quality assurance organization that has the primary responsibility for the quality system. With this shift of responsibilities, what can quality assurance do to help senior management fulfill their responsibility? How can quality assurance be more proactive, add more value? What new skills does quality assurance need to have in order to perform its new role? This article attempts to answer these questions.

  18. Linear Accelerator and Gamma Knife-Based Stereotactic Cranial Radiosurgery: Challenges and Successes of Existing Quality Assurance Guidelines and Paradigms

    SciTech Connect

    Goetsch, Steven J.

    2008-05-01

    Intracranial stereotactic radiosurgery has been practiced since 1951. The technique has expanded from a single dedicated unit in Stockholm in 1968 to hundreds of centers performing an estimated 100,000 Gamma Knife and linear accelerator cases in 2005. The radiation dosimetry of small photon fields used in this technique has been well explored in the past 15 years. Quality assurance recommendations have been promulgated in refereed reports and by several national and international professional societies since 1991. The field has survived several reported treatment errors and incidents, generally reacting by strengthening standards and precautions. An increasing number of computer-controlled and robotic-dedicated treatment units are expanding the field and putting patients at risk of unforeseen errors. Revisions and updates to previously published quality assurance documents, and especially to radiation dosimetry protocols, are now needed to ensure continued successful procedures that minimize the risk of serious errors.

  19. Progress Toward Quality Assurance Standards for Advanced Hydrocarbon Fuels Based on Thermal Performance Testing and Chemometric Modeling

    DTIC Science & Technology

    2015-12-15

    Conference Paper 3. DATES COVERED (From - To) 13 Nov 2015 – 15 Dec 2015 4. TITLE AND SUBTITLE Progress Toward Quality Assurance Standards For...UNIT NUMBER Q0A4 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION REPORT NO. Air Force Research...MONITOR’S ACRONYM(S) Air Force Research Laboratory (AFMC) AFRL/RQR 11. SPONSOR/MONITOR’S REPORT 5 Pollux Drive NUMBER(S) Edwards AFB, CA

  20. A multilaboratory peer assessment quality assurance program-based evaluation of anticardiolipin antibody, and beta2-glycoprotein I antibody testing.

    PubMed

    Favaloro, Emmanuel J; Wong, Richard C W; Silvestrini, Roger; McEvoy, Robert; Jovanovich, Susan; Roberts-Thomson, Peter

    2005-02-01

    We evaluated the performance of anticardiolipin (aCL) and beta2-glycoprotein I (beta2-GPI) antibody assays through a large external quality assurance program. Data from the 2002 cycle of the Royal College of Pathologists of Australasia Quality Assurance Program (RCPA QAP) were analyzed for variation in reported numerical values and semiquantitative results or interpretations according to method type or group and in conjunction with available clinical data. High interlaboratory variation in numerical results and notable method-based variation, combined with a general lack of consensus in semiquantitative reporting, continues to be observed. Numerical results from cross-laboratory testing of 12 serum samples (for immunoglobulin G [IgG]-aCL, IgM-aCL, and IgG-beta2-GPI) yielded interlaboratory coefficients of variation (CVs) that were higher than 50% in six of 12 (50%) specimens for IgG-aCL, and 12 of 12 (100%) specimens for IgM-aCL and IgG-beta2-GPI. Semiquantitative reporting also varied considerably, with total (100%) consensus occurring in only four of 36 (11%) occasions. General consensus (where > 90% of participating laboratories agreed that a given serum sample gave a result of either negative or positive) was only obtained on 13 of 36 (36%) occasions. Variation in results between different method types or groups were also present, resulting in potential biasing of the RCPA QAP-defined target results by the large number of laboratories using the dominant aCL assays. Finally, laboratory findings frequently did not agree with the available clinical information. In conclusion, in a large proportion of specimens from the 2002 RCPA QAP cycle, laboratories could not agree on whether a serum sample tested was aCL-positive or aCL-negative, or beta2-GPI-positive or beta2-GPI-negative. Despite prior attempts to improve the standardization of testing and reporting practices, laboratory testing for aCL and anti-beta2-GPI still demonstrates significant interlaboratory and

  1. Quality Assurance: An Educational Approach.

    ERIC Educational Resources Information Center

    Griffith, Nancy L.; Megel, Mary Erickson

    1981-01-01

    Describes a course designed to give students the theoretical and practical knowledge to understand the factors influencing the provision of quality nursing care; to use standards to evaluate nursing care; and to make planning changes to improvement. (Author)

  2. Chiropractic quality assurance: standards and guidelines

    PubMed Central

    Gatterman, Meridel I; Dobson, Thomas P; LeFevbre, Ron

    2001-01-01

    Chiropractic quality assurance involves development of both clinical guidelines and standards. Confusion generated by poor differentiation of guidelines from standards contributes to mistrust of the guideline development process. Guidelines are considered to be recommendations that allow for flexibility and individual patient differences. Standards are more binding and require a high level of supporting evidence. While guidelines serve as educational tools to improve the quality of practice, standards that outline minimum competency are used more as administrative tools on which to base policy. Barriers to development of clinical guidelines and standards include fear that they will create prescriptive “cookbook” practice, and the distrust that guidelines are developed primarily for cost containment. Clinicians also criticize guidelines developed by academics that don't relate to practice, and those based on evidence that lacks clinical relevance. Conflicting guidelines perceived to be based on strong bias or conflict of interest are also suspect. To reduce barriers to acceptance and implementation, guidelines should be inclusive, patient-centered, and based on a variety of evidence and clinical experience.

  3. Revision 2 of the Enbridge Quality Assurance Project Plan

    EPA Pesticide Factsheets

    This Quality Assurance Project Plan (QAPP) presents Revision 2 of the organization, objectives, planned activities, and specific quality assurance/quality control (QA/QC) procedures associated with the Enbridge Marshall Pipeline Release Project.

  4. Quality assurance and commissioning of an infrared marker-based patient positioning system for frameless extracranial stereotactic radiotherapy.

    PubMed

    Gupta, Tejpal; Phurailatpam, Reena; Ajay, Mishra; Rajeshri, Pai; Pranshu, Mohindra; Supriya, Chopra

    2007-12-01

    Rapid advancements in imaging technology have led to remarkable improvements in identification and localization of tumors, ushering the era of high-precision techniques in contemporary radiotherapy practice. However, uncertainties in patient set-up and organ motion during a course of fractionated radiotherapy can compromise precision of radiation therapy. Excellent accuracy has been achieved with invasive and non-invasive fixation systems for stereotactic radiotherapy. This report describes the commissioning procedure and Quality Assurance studies done to evaluate the accuracy of isocenter localization by an infrared marker-based positioning system (ExacTrac). The ExacTrac has two infrared cameras that emit and detect infrared rays from reflective markers and construct three-dimensional coordinates of each marker. It detects the difference of the actual isocenter position from the planned isocenter coordinates in three translational (lateral, longitudinal, vertical, or x,y,z axes) and three rotational axes (six degree of freedom). This study performed on a flat and static phantom shows excellent accuracy achieved by the ExacTrac system. The positioning accuracy of ExacTrac (± 1 mm translational displacement and ± 1° rotational errors) can be a valuable tool in implementing frameless extracranial stereotactic radiotherapy. Nevertheless, it needs to be further evaluated on patients with inherent motion and greater positional uncertainty before being adopted in clinical practice.

  5. The Institution-Based Prospective Inception Cohort Study: Design, Implementation, and Quality Assurance in Pediatric Thrombosis and Stroke Research

    PubMed Central

    Bernard, Timothy J.; Armstrong-Wells, Jennifer; Goldenberg, Neil A.

    2014-01-01

    The development of well-designed cohort studies in rare diseases can lead to the discovery of new risk factors and prognostic markers, enhance understanding of natural history and outcomes, and provide preliminary data for randomized controlled trials of treatment strategies. Designing a robust cohort requires substantial upfront design and planning. Ideally, a cohort study of diseased individuals follows patients prospectively from the time of diagnosis (i.e., from the disease’s inception). The objective of this article is to discuss the design and implementation of an institution-based prospective inception cohort study, with applied examples in pediatric stroke and thrombosis. Furthermore, we will discuss the ongoing management and quality assurance mechanisms necessary to optimize such a study. Although the resources necessary to implement a prospective inception cohort study are large, this approach can provide critical observational evidence on natural history and prognostic factors. Following multicenter validation, its findings can inform the design and execution of much-needed randomized controlled clinical trials. PMID:23269572

  6. Opportunity or Exploitation? Women and Quality Assurance in Higher Education

    ERIC Educational Resources Information Center

    Morley, Louise

    2005-01-01

    Based on interviews with 18 UK women academics and managers on quality and power in higher education, this article interrogates the impact of quality assurance discourses and practices on women in higher education. Micro-level analysis of the effects of audit and the evaluative state seem to suggest that hegemonic masculinities and gendered power…

  7. Quality Assurance in Distance and Open Learning

    ERIC Educational Resources Information Center

    Mahafzah, Mohammed Hasan

    2012-01-01

    E-learning has become an increasingly important teaching and learning mode in educational institutions and corporate training. The evaluation of E-learning, however, is essential for the quality assurance of E-learning courses. This paper constructs a three-phase evaluation model for E-learning courses, which includes development, process, and…

  8. Quality Assurance: Enhancing or Threatening Higher Education?

    ERIC Educational Resources Information Center

    Taousanidis, Nikolaos I.; Antoniadou, Myrofora A.

    2010-01-01

    There is an increasing marketization of commodity services and, the authors argue, higher education is suffering heavily from this trend. Higher education institutions (HEIs) are currently subject to quality assurance and other externally imposed procedures that have been successfully applied in the private sector. This article analyses the…

  9. Quality Assurance in Turkish Higher Education

    ERIC Educational Resources Information Center

    Bugday Ince, Sehriban; Gounko, Tatiana

    2014-01-01

    The implementation of quality assurance (QA) is one of the most challenging reform areas for Turkey due to the unique organization of its higher education system. This paper explores the development of QA systems in Turkish universities. Using a qualitative case study approach, the authors examine how Turkey accomplishes the goal of implementing…

  10. Quality Assurance in Higher Education in Zimbabwe

    ERIC Educational Resources Information Center

    Garwe, Evelyn Chiyevo

    2014-01-01

    The purpose of this paper is to furnish local and global stakeholders with detailed information regarding the development and current status of quality assurance in the Zimbabwean higher education sector. The study used document analysis, observation and interviews with key informants as sources of data. This paper addresses the dearth of…

  11. Quality Assurance Program: Beginning Teacher Warranty.

    ERIC Educational Resources Information Center

    Barr, Robert D.

    This report discusses the Quality Assurance Program at the OSU/WOSC School of Education, a merged school serving Oregon State University and Western Oregon State College. This major reform in teacher education is designed to bring a high level of accountability to teacher education and is called a "Warranty of First-Year Teachers." If,…

  12. Software quality assurance plan for GCS

    NASA Technical Reports Server (NTRS)

    Duncan, Stephen E.; Bailey, Elizabeth K.

    1990-01-01

    The software quality assurance (SQA) function for the Guidance and Control Software (GCS) project which is part of a software error studies research program is described. The SQA plan outlines all of the procedures, controls, and audits to be carried out by the SQA organization to ensure adherence to the policies, procedures, and standards for the GCS project.

  13. SWMM 5 REDEVELOPMENT QUALITY ASSURANCE PROGRAM

    EPA Science Inventory

    EPA recently released a new version of the Storm Water Management Model (SWMM) that combines a new interface with a completely re-written computational engine. The SWMM redevelopment project proceeded under a Quality Assurance Project Plan (QAPP) that describes methods and proced...

  14. Quality Assurance Program Development--Curriculum Development.

    ERIC Educational Resources Information Center

    Wisconsin Indianhead Technical Coll., Shell Lake.

    This document has two parts: (1) course outlines and unit lesson plans for 10 vocational courses; and (2) course descriptions. competencies, and topical outlines for 7 courses in a quality assurance curriculum. In the first part, outlines and unit lesson plans are provided for the following courses: standards and specifications, materials, basic…

  15. Effectiveness of Quality Assurance Training for Youth.

    ERIC Educational Resources Information Center

    Nold, Rosie; Hanson, Dana

    2001-01-01

    A quality assurance program was designed to teach youth about safe and wholesome food production, animal management techniques, and ethical decision making related to food animal production. Participants gained skills in animal management techniques and their opinions about consumer expectations were positively influenced. The program successfully…

  16. Quality assurance and quality control in monitoring programs

    USGS Publications Warehouse

    Shampine, W.J.

    1993-01-01

    There are three general characteristics of the data to be collected in a monitoring program that should be met in order to maximize the use and value of the data: the data quality should be known the data type and quality should be consistent and comparable, and the data should be available and accessible. Potential problems with each of these characteristics are addressed effectively by quality assurance and quality control. One of the most important aspects of quality assurance in a monitoring program is the development of a quality assurance plan, which should identify clearly the quality of the data needed and describe in detail the planned actions to provide confidence that the program will meet its stated objectives. Quality control data, which allow for the quality and suitability of the environmental data to be evaluated and ascertained, should be collected and utilized as an integral part of the QA effort associated with a monitoring program.

  17. Quality Assurance through ISO 9000.

    ERIC Educational Resources Information Center

    Zuckerman, Amy

    2000-01-01

    Created in 1987 by the International Organization for Standardization, in Geneva, Switzerland, ISO 9000 is attempting to develop a world standard to help companies and other institutions measure and monitor their quality-control efforts. This article describes four school districts' successful efforts to secure ISO 9000 certification. (MLH)

  18. Highly Integrated Quality Assurance – An Empirical Case

    SciTech Connect

    Drake Kirkham; Amy Powell; Lucas Rich

    2011-02-01

    Highly Integrated Quality Assurance – An Empirical Case Drake Kirkham1, Amy Powell2, Lucas Rich3 1Quality Manager, Radioisotope Power Systems (RPS) Program, Idaho National Laboratory, P.O. Box 1625 M/S 6122, Idaho Falls, ID 83415-6122 2Quality Engineer, RPS Program, Idaho National Laboratory 3Quality Engineer, RPS Program, Idaho National Laboratory Contact: Voice: (208) 533-7550 Email: Drake.Kirkham@inl.gov Abstract. The Radioisotope Power Systems Program of the Idaho National Laboratory makes an empirical case for a highly integrated Quality Assurance function pertaining to the preparation, assembly, testing, storage and transportation of 238Pu fueled radioisotope thermoelectric generators. Case data represents multiple campaigns including the Pluto/New Horizons mission, the Mars Science Laboratory mission in progress, and other related projects. Traditional Quality Assurance models would attempt to reduce cost by minimizing the role of dedicated Quality Assurance personnel in favor of either functional tasking or peer-based implementations. Highly integrated Quality Assurance adds value by placing trained quality inspectors on the production floor side-by-side with nuclear facility operators to enhance team dynamics, reduce inspection wait time, and provide for immediate, independent feedback. Value is also added by maintaining dedicated Quality Engineers to provide for rapid identification and resolution of corrective action, enhanced and expedited supply chain interfaces, improved bonded storage capabilities, and technical resources for requirements management including data package development and Certificates of Inspection. A broad examination of cost-benefit indicates highly integrated Quality Assurance can reduce cost through the mitigation of risk and reducing administrative burden thereby allowing engineers to be engineers, nuclear operators to be nuclear operators, and the cross-functional team to operate more efficiently. Applicability of this case

  19. 222-S laboratory quality assurance plan

    SciTech Connect

    Meznarich, H.K.

    1995-04-01

    This document provides quality assurance guidelines and quality control requirements for analytical services. This document is designed on the basis of Hanford Analytical Services Quality Assurance Plan (HASQAP) technical guidelines and is used for governing 222-S and 222-SA analytical and quality control activities. The 222-S Laboratory provides analytical services to various clients including, but not limited to, waste characterization for the Tank Waste Remediation Systems (TWRS), waste characterization for regulatory waste treatment, storage, and disposal (TSD), regulatory compliance samples, radiation screening, process samples, and TPA samples. A graded approach is applied on the level of sample custody, QC, data verification, and data reporting to meet the specific needs of the client.

  20. A Conceptual Model for School-Based Management Operation and Quality Assurance in Nigerian Secondary Schools

    ERIC Educational Resources Information Center

    Ayeni, Adeolu Joshua; Ibukun, Williams Olusola

    2013-01-01

    This paper examined the School-Based Management Committee's (SBMC) involvement and effectiveness in school governance, curriculum implementation and students' learning outcomes in Nigerian secondary schools; the major challenges facing effective operation of SBMCs were identified as low capacity of key members of the SBMCs; poor attendance of…

  1. Quality assurance in small plating shops

    SciTech Connect

    McNabb, W.J. )

    1993-10-01

    The potential for electroless nickel coatings in oilfield and petrochemical applications is quite high. The greatest obstacle to their use has been a reputation for poor quality due to a lack of quality control in many plating shops. To overcome this, electroless nickel shops should not only have a quality control program in their operation, but must also document its use and success. This article describes how a plating shoe can develop the necessary procedures, manuals, and paperwork trail to offer quality assurance and to satisfy customers.

  2. Quality Assurance and School Monitoring in Hong Kong

    ERIC Educational Resources Information Center

    Mok, Magdalena Mo Ching

    2007-01-01

    This study reports on the Hong Kong education quality assurance and school monitoring system. Three research questions were addressed: (1) Who controls the quality of school education in Hong Kong? (2) What strategies are used in the Hong Kong school education quality assurance process? (3) Agenda for Future Research on quality assurance and…

  3. 10 CFR 830.121 - Quality Assurance Program (QAP).

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality... the Quality Assurance criteria in § 830.122. (b) The contractor responsible for a DOE nuclear...

  4. 10 CFR 830.121 - Quality Assurance Program (QAP).

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality... the Quality Assurance criteria in § 830.122. (b) The contractor responsible for a DOE nuclear...

  5. 10 CFR 72.140 - Quality assurance requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance requirements. 72.140 Section 72.140... SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality Assurance § 72.140 Quality assurance requirements. (a) Purpose. This subpart describes quality...

  6. 10 CFR 830.122 - Quality assurance criteria.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Quality assurance criteria. 830.122 Section 830.122 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.122 Quality assurance...) Criterion 3—Management/Quality Improvement. (1) Establish and implement processes to detect and...

  7. 10 CFR 830.122 - Quality assurance criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Quality assurance criteria. 830.122 Section 830.122 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.122 Quality assurance...) Criterion 3—Management/Quality Improvement. (1) Establish and implement processes to detect and...

  8. Streamlining EPID-based IMRT quality assurance: auto-analysis and auto-report generation

    NASA Astrophysics Data System (ADS)

    Xing, Aitang; Arumugam, Sankar; Deshpande, Shrikant; Armia; George; Holloway, Lois; Goozee, Gary; Gray, Alison; Vial, Philip

    2014-03-01

    Using an EPID for patient specific IMRT QA is an efficient way to verify patient plans prior to the treatment. Our centres' current EPID dosimetry method is based on a water equivalent depth approach, where EPID images of each IMRT field are converted to dose images and compared to Treatment planning system calculated dose images using a commercial software tool. Two physicists across two sites perform the analysis for an average of 12 new IMRT patients per week. To speed up this process, an in-house program called AutoEPIDIMRTQA was developed. The program automatically performs the following tasks sequentially: reading and converting raw EPID images acquired on either a Siemens Oncor or Elekta Synergy linear accelerator, registering them with planar dose images calculated by Pinnacle (Philips) or CMS XiO (Elekta) treatment planning systems, analyzing the profiles for registered images and calculating the Gamma map. Finally an IMRT QA report is automatically generated. AutoEPIDIMRTQA was validated against commercial software. The analysis time for a typical 9-beam IMRT head-neck patient decreases from 30 minutes to 4 minutes. The total QA time was reduced by 40% using AutoEPIDIMRTQA. Thus we have demonstrated a significant reduction in the time burden for physics staff performing IMRT QA.

  9. Development of a 3D optical scanning-based automatic quality assurance system for proton range compensators

    SciTech Connect

    Kim, MinKyu; Ju, Sang Gyu E-mail: doho.choi@samsung.com; Chung, Kwangzoo; Hong, Chae-Seon; Kim, Jinsung; Ahn, Sung Hwan; Jung, Sang Hoon; Han, Youngyih; Chung, Yoonsun; Cho, Sungkoo; Choi, Doo Ho E-mail: doho.choi@samsung.com; Kim, Jungkuk; Shin, Dongho

    2015-02-15

    Purpose: A new automatic quality assurance (AutoRCQA) system using a three-dimensional scanner (3DS) with system automation was developed to improve the accuracy and efficiency of the quality assurance (QA) procedure for proton range compensators (RCs). The system performance was evaluated for clinical implementation. Methods: The AutoRCQA system consists of a three-dimensional measurement system (3DMS) based on 3DS and in-house developed verification software (3DVS). To verify the geometrical accuracy, the planned RC data (PRC), calculated with the treatment planning system (TPS), were reconstructed and coregistered with the measured RC data (MRC) based on the beam isocenter. The PRC and MRC inner surfaces were compared with composite analysis (CA) using 3DVS, using the CA pass rate for quantitative analysis. To evaluate the detection accuracy of the system, the authors designed a fake PRC by artificially adding small cubic islands with side lengths of 1.5, 2.5, and 3.5 mm on the inner surface of the PRC and performed CA with the depth difference and distance-to-agreement tolerances of [1 mm, 1 mm], [2 mm, 2 mm], and [3 mm, 3 mm]. In addition, the authors performed clinical tests using seven RCs [computerized milling machine (CMM)-RCs] manufactured by CMM, which were designed for treating various disease sites. The systematic offsets of the seven CMM-RCs were evaluated through the automatic registration function of AutoRCQA. For comparison with conventional technique, the authors measured the thickness at three points in each of the seven CMM-RCs using a manual depth measurement device and calculated thickness difference based on the TPS data (TPS-manual measurement). These results were compared with data obtained from 3DVS. The geometrical accuracy of each CMM-RC inner surface was investigated using the TPS data by performing CA with the same criteria. The authors also measured the net processing time, including the scan and analysis time. Results: The Auto

  10. ALMA quality assurance: concepts, procedures, and tools

    NASA Astrophysics Data System (ADS)

    Chavan, A. M.; Tanne, S. L.; Akiyama, E.; Kurowski, R.; Randall, S.; Vila Vilaro, B.; Villard, E.

    2016-07-01

    Data produced by ALMA for the community undergoes a rigorous quality assurance (QA) process, from the initial observation ("QA0") to the final science-ready data products ("QA2"), to the QA feedback given by the Principal Investigators (PIs) when they receive the data products ("QA3"). Calibration data is analyzed to measure the performance of the observatory and predict the trend of its evolution ("QA1"). The procedure develops over different steps and involves several actors across all ALMA locations; it is made possible by the support given by dedicated software tools and a complex database of science data, meta-data and operational parameters. The life-cycle of each involved entity is well-defined, and it prevents for instance that "bad" data (that is, data not meeting the minimum quality standards) is ever processed by the ALMA pipeline. This paper describes ALMA's quality assurance concepts and procedures, including the main enabling software components.

  11. [Quality assurance in occupational health services].

    PubMed

    Michalak, J

    1996-01-01

    The general conditions influencing the quality assurance and audit in Polish occupational health services are presented. The factors promoting or hampering the implementation of quality assurance and audits are also discussed. The major influence on the transformation of Polish occupational health services in exorted by employers who are committed to cover the costs of the obligatory prophylactic examination of their employees. This is the factor which also contributes to the improvement of quality if services. The definitions of the most important terms are reviewed to highlight their accordance with the needs of occupational health services in Poland. The examples of audit are presented and the elements of selected methods of auditing are suggested to be adopted in Poland.

  12. 7 CFR 56.39 - Quality assurance inspector required.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... supervision of a grader or quality assurance inspector. The grader or quality assurance inspector shall have.... 14, 1977. Redesignated at 42 FR 32514, June 27, 1977, as amended at 46 FR 39570, Aug. 4,...

  13. 7 CFR 56.39 - Quality assurance inspector required.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... supervision of a grader or quality assurance inspector. The grader or quality assurance inspector shall have.... 14, 1977. Redesignated at 42 FR 32514, June 27, 1977, as amended at 46 FR 39570, Aug. 4,...

  14. Now & Then: Ingrid Proctor-Fridia: Quality Assurance Representative.

    ERIC Educational Resources Information Center

    Barnes, Sue; Michalowicz, Karen Dee

    1995-01-01

    Describes the use of geometry now by a U.S. Department of Defense quality assurance representative and in ancient times by the Egyptians and Babylonians. Includes reproducible student worksheets on quality assurance. (MKR)

  15. 78 FR 7816 - Quality Assurance Program Requirements (Operations)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-04

    ... COMMISSION Quality Assurance Program Requirements (Operations) AGENCY: Nuclear Regulatory Commission. ACTION... issuing for public comment draft regulatory guide (DG), DG-1300, ``Quality Assurance Program Requirements...'s Agencywide Documents Access and Management System (ADAMS): You may access...

  16. 7 CFR 90.102 - Quality assurance review.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) COMMODITY LABORATORY TESTING PROGRAMS INTRODUCTION Quality Assurance § 90.102 Quality assurance review. (a) Each laboratory performing tests...

  17. Quality Assurance of Quality Assurance Agencies from an Asian Perspective: Regulation, Autonomy and Accountability

    ERIC Educational Resources Information Center

    Hou, Angela Yung-Chi; Ince, Martin; Tsai, Sandy; Chiang, Chung Lin

    2015-01-01

    As quality guardians of higher education, quality assurance agencies are required to guarantee the credibility of the review process and to ensure the objectivity and transparency of their decisions and recommendations. These agencies are therefore expected to use a range of internal and external approaches to prove the quality of their review…

  18. Quality assurance of PMR-15

    NASA Technical Reports Server (NTRS)

    Hunter, A. B.

    1979-01-01

    Controls on the PMR-15 resin and/or prepreg were established to ensure a solid base for the subsequent process development task. The effort was divided into subtasks which included evaluation of commercially available graphite/PMR-15 polyimide prepregs, detailed evaluation of materials and selection of chemical test procedures. During the initial phase of the program a variability problem was detected in the PMR-15 resin. The manufacturing and/or storage of the PMR-15 resin/esters was identified as the chief cause for the variability.

  19. SU-E-T-253: Development of a GDPM Monte Carlo Based Quality Assurance Tool for Cyberknife

    SciTech Connect

    Webster, M; Ouyang, L; Folkerts, M; Tian, Z; Jia, X; Jiang, S; Gu, X

    2015-06-15

    Purpose: To develop a 3D quality assurance (QA) tool for Cyberknife plans using a GPU-based Monte Carlo dose calculation package, gDPM. The developed QA tool will be used as a secondary check for Cyberknife treatment planning software (TPS) reported dose distributions. Methods: Phase space files of the 5, 7.5, 10, 15, and 60 mm iris cones were downloaded from IAEA phase-space database. From the 60mm iris cone phase space file, we were able to generate raw phase space files for all other cones using a particle rejection method. The particles in the raw phase space files were binned with respect to the radial position and energy for commissioning. During the commissioning process, gDPM calculated percent depth dose and off-center ratios which were compared to those measured in the Blue Phantom. The off-axis data was measured with an SAD setup at depths of 15, 50, 100, 200, and 300 mm. At the commissioning stage, an optimization problem was solved to adjust the binned particles weights to minimize the difference between the calculated and measured ones. Commissioning validations will be performed by measuring point dose data of patient specific plans delivered to water phantoms. With commissioned phase space files, 3D patient-specific dose distributions will be calculated and compared against TPS reported dose. Results: Beyond the initial buildup region, the root mean square difference between the calculated and measured percent depth dose differences was less than 0.5%. The full-width half-max data from the off-axis ratio calculations was found to be within 0.1 mm of the measured data. Conclusion: Our current work showed excellent agreement between the gDPM calculated dose and the measured data for all cone sizes and types for the Cyberknife system. Implementation of a fast and accurate QA tool for patient specific plans will be feasible with this tool.

  20. Quality Assurance and Quality Enhancement in Higher Education: Contested Territories?

    ERIC Educational Resources Information Center

    Filippakou, Ourania; Tapper, Ted

    2008-01-01

    This paper analyses the unfolding of the quality agenda in England from 1992 to the present. By using two disciplinary approaches, "political science" and "social philosophy", the article traces the recent transition from quality assurance to quality enhancement. How is this development to be explained and how significant is…

  1. New challenges in assuring vaccine quality.

    PubMed Central

    Dellepiane, N.; Griffiths, E.; Milstien, J. B.

    2000-01-01

    In the past, quality control of vaccines depended on use of a variety of testing methods to ensure that the products were safe and potent. These methods were developed for vaccines whose safety and efficacy were based on several years worth of data. However, as vaccine production technologies have developed, so have the testing technologies. Tests are now able to detect potential hazards with a sensitivity not possible a few years ago, and an increasing array of physicochemical methods allows a much better characterization of the product. In addition to sophisticated tests, vaccine regulation entails a number of other procedures to ensure safety. These include characterization of starting materials by supplier audits, cell banking, seed lot systems, compliance with the principles of good manufacturing practices, independent release of vaccines on a lot-by-lot basis by national regulatory authorities, and enhanced pre- and post-marketing surveillance for possible adverse events following immunization. These procedures help assure vaccine efficacy and safety, and some examples are given in this article. However, some contaminants of vaccines that can be detected by newer assays raise theoretical safety concerns but their presence may be less hazardous than not giving the vaccines. Thus risk-benefit decisions must be well informed and based on scientific evidence. PMID:10743279

  2. ERD UMTRA Project quality assurance program plan, Revision 7

    SciTech Connect

    1995-09-01

    This document is the revised Quality Assurance Program Plan (QAPP) dated September, 1995 for the Environmental Restoration Division (ERD) Uranium Mill Tailings Remedial Action Project (UMTRA). Quality Assurance requirements for the ERD UMTRA Project are based on the criteria outlined in DOE Order 5700.6C or applicable sections of 10 CFR 830.120. QA requirements contained in this QAPP shall apply to all personnel, processes, and activities, including planning, scheduling, and cost control, performed by the ERD UMTRA Project and its contractors.

  3. 10 CFR 72.174 - Quality assurance records.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance records. 72.174 Section 72.174 Energy... NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality Assurance § 72.174 Quality assurance records. The licensee, applicant for a license, certificate holder,...

  4. 48 CFR 12.208 - Contract quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Contract quality assurance... Items 12.208 Contract quality assurance. Contracts for commercial items shall rely on contractors' existing quality assurance systems as a substitute for Government inspection and testing before tender...

  5. 40 CFR 160.35 - Quality assurance unit.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Quality assurance unit. 160.35 Section... LABORATORY PRACTICE STANDARDS Organization and Personnel § 160.35 Quality assurance unit. (a) A testing facility shall have a quality assurance unit which shall be responsible for monitoring each study to...

  6. 10 CFR 71.135 - Quality assurance records.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance records. 71.135 Section 71.135 Energy... Assurance § 71.135 Quality assurance records. The licensee, certificate holder, and applicant for a CoC... include the instructions, procedures, and drawings required by § 71.111 to prescribe quality...

  7. 42 CFR 417.418 - Qualifying condition: Quality assurance program.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Qualifying condition: Quality assurance program... Qualifying condition: Quality assurance program. (a) Condition. The HMO or CMP must make arrangements for a quality assurance program that meets the requirements of this section. (b) Standard. An HMO or CMP...

  8. 38 CFR 46.6 - Medical quality assurance records confidentiality.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Medical quality assurance records confidentiality. 46.6 Section 46.6 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS... Medical quality assurance records confidentiality. Note that medical quality assurance records that...

  9. Quality Assurance of Assessment and Moderation Discourses Involving Sessional Staff

    ERIC Educational Resources Information Center

    Grainger, Peter; Adie, Lenore; Weir, Katie

    2016-01-01

    Quality assurance is a major agenda in tertiary education. The casualisation of academic work, especially in teaching, is also a quality assurance issue. Casual or sessional staff members teach and assess more than 50% of all university courses in Australia, and yet the research in relation to the role sessional staff play in quality assurance of…

  10. 10 CFR 63.144 - Quality assurance program change.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance program change. 63.144 Section 63.144 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Quality Assurance § 63.144 Quality assurance program change. Changes...

  11. 10 CFR 63.144 - Quality assurance program change.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance program change. 63.144 Section 63.144 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Quality Assurance § 63.144 Quality assurance program change. Changes...

  12. 10 CFR 63.144 - Quality assurance program change.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance program change. 63.144 Section 63.144 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Quality Assurance § 63.144 Quality assurance program change. Changes...

  13. 10 CFR 63.144 - Quality assurance program change.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Quality assurance program change. 63.144 Section 63.144 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Quality Assurance § 63.144 Quality assurance program change. Changes...

  14. 10 CFR 63.144 - Quality assurance program change.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Quality assurance program change. 63.144 Section 63.144 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Quality Assurance § 63.144 Quality assurance program change. Changes...

  15. 40 CFR 792.35 - Quality assurance unit.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 33 2013-07-01 2013-07-01 false Quality assurance unit. 792.35 Section... ACT (CONTINUED) GOOD LABORATORY PRACTICE STANDARDS Organization and Personnel § 792.35 Quality assurance unit. (a) A testing facility shall have a quality assurance unit which shall be responsible...

  16. 49 CFR 180.505 - Quality assurance program.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Quality assurance program. 180.505 Section 180.505... MAINTENANCE OF PACKAGINGS Qualification and Maintenance of Tank Cars § 180.505 Quality assurance program. The quality assurance program requirements of § 179.7 of this subchapter apply....

  17. 40 CFR 75.45 - Daily quality assurance criteria.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 16 2011-07-01 2011-07-01 false Daily quality assurance criteria. 75... (CONTINUED) CONTINUOUS EMISSION MONITORING Alternative Monitoring Systems § 75.45 Daily quality assurance... that such tests are unnecessary for providing quality-assured data....

  18. 48 CFR 2152.246-70 - Quality assurance requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Quality assurance... PRECONTRACT PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 2152.246-70 Quality assurance requirements. As prescribed by 2146.270-1 insert the following clause: Quality Assurance Requirements (OCT...

  19. 49 CFR 180.505 - Quality assurance program.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Quality assurance program. 180.505 Section 180.505 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Qualification and Maintenance of Tank Cars § 180.505 Quality assurance program. The quality assurance...

  20. 48 CFR 12.208 - Contract quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Contract quality assurance... Items 12.208 Contract quality assurance. Contracts for commercial items shall rely on contractors' existing quality assurance systems as a substitute for Government inspection and testing before tender...

  1. 40 CFR 75.45 - Daily quality assurance criteria.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Daily quality assurance criteria. 75... (CONTINUED) CONTINUOUS EMISSION MONITORING Alternative Monitoring Systems § 75.45 Daily quality assurance... that such tests are unnecessary for providing quality-assured data....

  2. 40 CFR 160.35 - Quality assurance unit.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Quality assurance unit. 160.35 Section... LABORATORY PRACTICE STANDARDS Organization and Personnel § 160.35 Quality assurance unit. (a) A testing facility shall have a quality assurance unit which shall be responsible for monitoring each study to...

  3. 40 CFR 160.35 - Quality assurance unit.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Quality assurance unit. 160.35 Section... LABORATORY PRACTICE STANDARDS Organization and Personnel § 160.35 Quality assurance unit. (a) A testing facility shall have a quality assurance unit which shall be responsible for monitoring each study to...

  4. 49 CFR 180.505 - Quality assurance program.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Quality assurance program. 180.505 Section 180.505 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Qualification and Maintenance of Tank Cars § 180.505 Quality assurance program. The quality assurance...

  5. Perspectives on Quality Assurance in Higher Education in Norway

    ERIC Educational Resources Information Center

    Lycke, Kirsten Hofgaard

    2004-01-01

    Quality assurance is well known internationally but the notion is relatively new in Norway. To understand some of the issues and dilemmas that emerge in the Norwegian reception of quality assurance in higher education, this article traces how quality assurance is gaining its form and how international trends are understood, transposed and adopted…

  6. Development of an Instructional Quality Assurance Model in Nursing Science

    ERIC Educational Resources Information Center

    Ajpru, Haruthai; Pasiphol, Shotiga; Wongwanich, Suwimon

    2011-01-01

    The purpose of this study was to develop an instructional quality assurance model in nursing science. The study was divided into 3 phases; (1) to study the information for instructional quality assurance model development (2) to develop an instructional quality assurance model in nursing science and (3) to audit and the assessment of the developed…

  7. Single-Subject Evaluation: A Tool for Quality Assurance.

    ERIC Educational Resources Information Center

    Nuehring, Elane M.; Pascone, Anne B.

    1986-01-01

    The use of single-subject designs in peer review, in utilization review, and in other quality-assurance audits is encouraged. Presents an overview of the methodologies of single-subject designs and quality assurance, and provides examples of cases in which single-subject techniques furnished relevant quality assurance documentation. (Author/ABB)

  8. Operational excellence (six sigma) philosophy: Application to software quality assurance

    SciTech Connect

    Lackner, M.

    1997-11-01

    This report contains viewgraphs on operational excellence philosophy of six sigma applied to software quality assurance. This report outlines the following: goal of six sigma; six sigma tools; manufacturing vs administrative processes; Software quality assurance document inspections; map software quality assurance requirements document; failure mode effects analysis for requirements document; measuring the right response variables; and questions.

  9. 10 CFR 74.59 - Quality assurance and accounting requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... NUCLEAR MATERIAL Formula Quantities of Strategic Special Nuclear Material § 74.59 Quality assurance and... licensee shall assure that the quality of SSNM measurement systems and material processing practices is... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance and accounting requirements....

  10. Quality Assurance in Postgraduate Education. ENQA Workshop Report 12

    ERIC Educational Resources Information Center

    Bitusikova, Alexandra; Bohrer, Janet; Borosic, Ivana; Costes, Nathalie; Edinsel, Kerim; Hollander, Karoline; Jacobsson, Gunilla; Jakopovic, Ivan Filip; Kearney, Mary-Louise; Mulder, Fred; Negyesi, Judith; Pietzonka, Manuel

    2010-01-01

    The present report follows an ENQA (European Association for Quality Assurance in Higher Education) Workshop on Quality Assurance and Postgraduate Education, hosted by the Romanian Agency for Quality Assurance in Higher Education (ARACIS) in Brasov, Romania on 12-13 March 2009. The workshop was an excellent opportunity for ENQA members to exchange…

  11. Quality Assurance in Transnational Higher Education. ENQA Workshop Report 11

    ERIC Educational Resources Information Center

    Bennett, Paul; Bergan, Sjur; Cassar, Daniela; Hamilton, Marlene; Soinila, Michele; Sursock, Andree; Uvalic-Trumbic, Stamenka; Williams, Peter

    2010-01-01

    The present report is the product of an ENQA (European Association for Quality Assurance in Higher Education) Bologna Seminar "Quality Assurance in Transnational Education: from words to action" hosted by the Quality Assurance Agency (QAA, UK) in London in December, 2008. The seminar discussed the current trends in Transnational…

  12. 40 CFR 264.19 - Construction quality assurance program.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Construction quality assurance program... FACILITIES General Facility Standards § 264.19 Construction quality assurance program. (a) CQA program. (1) A construction quality assurance (CQA) program is required for all surface impoundment, waste pile, and...

  13. 40 CFR 265.19 - Construction quality assurance program.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Construction quality assurance program..., STORAGE, AND DISPOSAL FACILITIES General Facility Standards § 265.19 Construction quality assurance program. (a) CQA program. (1) A construction quality assurance (CQA) program is required for all...

  14. Quality assurance program plan for radionuclide airborne emissions monitoring

    SciTech Connect

    Boom, R.J.

    1995-12-01

    This Quality Assurance Program Plan identifies quality assurance program requirements and addresses the various Westinghouse Hanford Company organizations and their particular responsibilities in regards to sample and data handling of radiological airborne emissions. This Quality Assurance Program Plan is prepared in accordance with and to written requirements.

  15. Versatile transceiver production and quality assurance

    NASA Astrophysics Data System (ADS)

    Olantera, L.; Detraz, S.; Sigaud, C.; Soos, C.; Troska, J.; Vasey, F.; Zeiler, M.

    2017-01-01

    The Versatile Link project has developed a radiation-hard optical link for LHC phase 1 detector upgrades. The project has reached its final stage and we have launched in 2016 the production of the Versatile Transceivers and Versatile Twin Transmitters. This paper provides an update of the production status and a detailed description and results of the quality assurance programme, which includes qualification and acceptance testing at CERN and production testing at the manufacturers' premises.

  16. The quality assurance program at K & S

    SciTech Connect

    Slowey, T.W.

    1993-12-31

    K & S operates the largest and one of the most comprehensive Accredited Dosimetry Calibration Laboratories (ADCLs) in the American Association of Physicists in Medicine (AAPM) secondary laboratory system. It offers calibrations covering energies from Grenz-Ray (0.03-mm Al) to cesium-137 and cobalt-60, brachytherapy source and well chamber calibrations for low-activity sources, and, recently, high-dose-rate iridium-192. The present Quality Assurance (QA) program at K & S began with the AAPM Guidelines for Accreditation (Task Group No. 22 and No. 3, 1989) and grew over the past 10 years to include all aspects of providing a private, self-supporting calibration service from a free-standing independent facility. Some aspects of the QA program were prompted by the requirements of the nuclear power industry while other parts were from national consensus standards or the experiences of staff. Redundancy and teamwork are the most important characteristics of this QA program. K & S has participated in a National Institute of Standards and Technology (NIST) measurement quality assurance (MQA) program since 1982, and, in recent years, an ADCL intralaboratory intercomparison was conducted by Task Group 3 of the Radiation Therapy Committee of the AAPM. One measure of the credibility of a QA program is consistent performance on the MQA program and the ADCL intercomparisons over the past 10 years. An equally important measure of the ability of a program to assure quality results is the frequency of reported errors.

  17. Redesigning Radiotherapy Quality Assurance: Opportunities to Develop an Efficient, Evidence-Based System to Support Clinical Trials-Report of the National Cancer Institute Work Group on Radiotherapy Quality Assurance

    SciTech Connect

    Bekelman, Justin E.; Deye, James A.; Vikram, Bhadrasain; Bentzen, Soren M.; Bruner, Deborah; Curran, Walter J.; Dignam, James; Efstathiou, Jason A.; FitzGerald, T.J.; Hurkmans, Coen; Ibbott, Geoffrey S.; Lee, J. Jack; Merchant, Thomas E.; Michalski, Jeff; Palta, Jatinder R.; Simon, Richard; Ten Haken, Randal K.; Timmerman, Robert; Tunis, Sean; Coleman, C. Norman; and others

    2012-07-01

    Purpose: In the context of national calls for reorganizing cancer clinical trials, the National Cancer Institute sponsored a 2-day workshop to examine challenges and opportunities for optimizing radiotherapy quality assurance (QA) in clinical trial design. Methods and Materials: Participants reviewed the current processes of clinical trial QA and noted the QA challenges presented by advanced technologies. The lessons learned from the radiotherapy QA programs of recent trials were discussed in detail. Four potential opportunities for optimizing radiotherapy QA were explored, including the use of normal tissue toxicity and tumor control metrics, biomarkers of radiation toxicity, new radiotherapy modalities such as proton beam therapy, and the international harmonization of clinical trial QA. Results: Four recommendations were made: (1) to develop a tiered (and more efficient) system for radiotherapy QA and tailor the intensity of QA to the clinical trial objectives (tiers include general credentialing, trial-specific credentialing, and individual case review); (2) to establish a case QA repository; (3) to develop an evidence base for clinical trial QA and introduce innovative prospective trial designs to evaluate radiotherapy QA in clinical trials; and (4) to explore the feasibility of consolidating clinical trial QA in the United States. Conclusion: Radiotherapy QA can affect clinical trial accrual, cost, outcomes, and generalizability. To achieve maximum benefit, QA programs must become more efficient and evidence-based.

  18. S-PRIME Thermionic Space Nuclear Power System Quality Assurance Program Plan

    SciTech Connect

    Jones, C.M.

    1992-09-23

    This Quality Assurance Program Plan (QAPP)describes how the Thermionic Space Nuclear Power System Design and Technology Demonstration Project addresses the Quality Assurance requirements delineated in DOE Order 5700.6C and the Thermionic Program Management Plan 214PMP000001. The Quality Assurance Program is based on the following fundamental principles, which Rocketdyne endorses and the QA Project Manager and Program Manager shall enforce: Quality Achievement is a continuing responsibility of line organization at all levels; the Quality Assurance organization through the effective overview of work, gives additional assurance that specified requirements are met; risk is the fundamental consideration in determining to what extent the Quality Assurance Plan should be applied to items and processes; action is based on facts and analysis, customer driven quality, strong quality leadership and continuous improvement.

  19. Quality assurance of a helical tomotherapy machine

    NASA Astrophysics Data System (ADS)

    Fenwick, J. D.; Tomé, W. A.; Jaradat, H. A.; Hui, S. K.; James, J. A.; Balog, J. P.; DeSouza, C. N.; Lucas, D. B.; Olivera, G. H.; Mackie, T. R.; Paliwal, B. R.

    2004-07-01

    Helical tomotherapy has been developed at the University of Wisconsin, and 'Hi-Art II' clinical machines are now commercially manufactured. At the core of each machine lies a ring-gantry-mounted short linear accelerator which generates x-rays that are collimated into a fan beam of intensity-modulated radiation by a binary multileaf, the modulation being variable with gantry angle. Patients are treated lying on a couch which is translated continuously through the bore of the machine as the gantry rotates. Highly conformal dose-distributions can be delivered using this technique, which is the therapy equivalent of spiral computed tomography. The approach requires synchrony of gantry rotation, couch translation, accelerator pulsing and the opening and closing of the leaves of the binary multileaf collimator used to modulate the radiation beam. In the course of clinically implementing helical tomotherapy, we have developed a quality assurance (QA) system for our machine. The system is analogous to that recommended for conventional clinical linear accelerator QA by AAPM Task Group 40 but contains some novel components, reflecting differences between the Hi-Art devices and conventional clinical accelerators. Here the design and dosimetric characteristics of Hi-Art machines are summarized and the QA system is set out along with experimental details of its implementation. Connections between this machine-based QA work, pre-treatment patient-specific delivery QA and fraction-by-fraction dose verification are discussed.

  20. Running around in Circles: Quality Assurance Reforms in Georgia

    ERIC Educational Resources Information Center

    Jibladze, Elene

    2013-01-01

    This article investigates the implementation of a quality assurance system in Georgia as a particular case of "Bologna transplant" in a transitioning country. In particular, the article discusses to what extent new concepts, institutions and models framed as "European" have been institutionalised in Georgia. Based on an outcome…

  1. The Quality Assurance of Degree Education in Canada

    ERIC Educational Resources Information Center

    Baker, Donald N.; Miosi, Terry

    2010-01-01

    Under the Canadian constitution, responsibility for education is assigned to the provinces. In some provinces, universities are based in institution-specific statutes, in others, in system-wide legislation. Except for the provinces of Alberta and British Columbia, the provinces leave the quality assurance of academic activities to the…

  2. Software Quality Assurance: Early and Continuous Throughout the Lifecycle

    DTIC Science & Technology

    2009-04-23

    Assessment ( ISQA ) • Wrap-up • Glossary 2SSTC 2009 – SW Qual Assurance in Lifecycle (20-Apr-2009).ppt Perspectives Influence Software Quality Goals...yc e • Independent Software Quality Assessment ( ISQA ) • Wrap-up • Glossary 5SSTC 2009 – SW Qual Assurance in Lifecycle (20-Apr-2009).ppt Why Software... ISQA ) • Wrap-up • Glossary 7SSTC 2009 – SW Qual Assurance in Lifecycle (20-Apr-2009).ppt Software Quality Assurance Problem, Solution, Result Problem

  3. Online Course Quality Assurance: Development of a Quality Checklist

    ERIC Educational Resources Information Center

    McGahan, Steven J.; Jackson, Christina M.; Premer, Karen

    2015-01-01

    The University of Nebraska at Kearney's Online Course Checklist is the main instrument for assessing the quality of online courses at UNK. A number of issues were faced when developing and deploying this quality assurance checklist at a small four-year university. The process including development, implementation, and revision is discussed along…

  4. QUALITY SCIENCE AND QUALITY ASSURANCE: OBSERVATIONS OR AN ENVIRONMENTAL SCIENTIST

    EPA Science Inventory

    --

    ABSTRACT
    The purpose of this manuscript is to examine the relationship between quality science (QS) and quality assurance (QA). Many research scientists definitely want to do QS, but are afraid or do not want to do QA because they are intimidated by the QA proc...

  5. Quality assurance from a manufacturer's standpoint

    NASA Astrophysics Data System (ADS)

    Anderson, William J.

    1991-05-01

    The efforts of a manufacturer in the area of component procurement acceptance testing are very visible, while the quality assurance work that goes on during the design and manufacture of medical imaging equipment is frequently not so apparent. Many steps in the design and production of imaging devices are carefully designed to promote not only quality of the devices when initially installed, but also the ability to maintain the device''s quality over a period of time. Customer requirements for aesthetics, performance, safety and regulatory compliance must be considered. Software, which represents over 70 of the design engineering of modern products, presents a special challenge since the quality of software cannot be tested and must be designed in. Specific hardware elements such as monitor phosphor color and uniformity deserve extra consideration. A design that allows quick diagnosis and replacement of failed components is also important.

  6. 48 CFR 846.408 - Single-agency assignments of Government contract quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... of Government contract quality assurance. 846.408 Section 846.408 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 846.408 Single-agency assignments of Government contract quality assurance....

  7. 48 CFR 46.408 - Single-agency assignments of Government contract quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... of Government contract quality assurance. 46.408 Section 46.408 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.408 Single-agency assignments of Government contract quality assurance. (a)...

  8. 10 CFR 71.135 - Quality assurance records.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Assurance § 71.135 Quality assurance records. The licensee, certificate holder, and applicant for a CoC..., location, and assigned responsibility. The licensee, certificate holder, and applicant for a CoC shall... a CoC last engage in the activity for which the quality assurance program was developed. If...

  9. Measurement quality assurance for radioassay laboratories

    SciTech Connect

    McCurdy, D.E.

    1993-12-31

    Until recently, the quality of U.S. radioassay laboratory services has been evaluated by a limited number of governmental measurement assurance programs (MAPs). The major programs have been limited to the U.S. Department of Energy (DOE), the U.S. Environmental Protection Agency (EPA) and the U.S. Nuclear Regulatory Commission (NRC). In 1988, an industry MAP was established for the nuclear power utility industry through the U.S. Council for Energy Awareness/National Institute of Standards and Technology (USCEA/NIST). This program functions as both a MAP for utility laboratories and/or their commercial contractor laboratories, and as a traceability program for the U.S. radioactive source manufacturers and the utility laboratories. Each of these generic MAPs has been initiated and is maintained to serve the specific needs of the sponsoring agency or organization. As a result, there is diversification in their approach, scope, requirements, and degree of traceability to NIST. In 1987, a writing committee was formed under the American National Standards Institute (ANSI) N42.2 committee to develop a standard to serve as the basis document for the creation of a national measurement quality assurance (MQA) program for radioassay laboratories in the U.S. The standard is entitled, {open_quotes}Measurement Quality Assurance For Radioassay Laboratories.{open_quotes} The document was developed to serve as a guide for MQA programs maintained for the specialized sectors of the radioassay community, such as bioassay, routine environmental monitoring, environmental restoration and waste management, radiopharmaceuticals, and nuclear facilities. It was the intent of the writing committee to develop a guidance document that could be utilized to establish a laboratory`s specific data quality objectives (DQOs) that govern the operational requirements of the radioassay process, including mandated protocols and recommendations.

  10. [Quality assurance and quality management in intensive care].

    PubMed

    Notz, K; Dubb, R; Kaltwasser, A; Hermes, C; Pfeffer, S

    2015-11-01

    Treatment success in hospitals, particularly in intensive care units, is directly tied to quality of structure, process, and outcomes. Technological and medical advancements lead to ever more complex treatment situations with highly specialized tasks in intensive care nursing. Quality criteria that can be used to describe and correctly measure those highly complex multiprofessional situations have only been recently developed and put into practice.In this article, it will be shown how quality in multiprofessional teams can be definded and assessed in daily clinical practice. Core aspects are the choice of a nursing theory, quality assurance measures, and quality management. One possible option of quality assurance is the use of standard operating procedures (SOPs). Quality can ultimately only be achieved if professional groups think beyond their boundaries, minimize errors, and establish and live out instructions and SOPs.

  11. 10 CFR 71.103 - Quality assurance organization.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... location or locations where activities are performed, the organizational structure for executing the... the organizational structure, the individual(s) assigned the responsibility for assuring effective... performing quality assurance functions must have sufficient authority and organizational freedom to—...

  12. 10 CFR 71.103 - Quality assurance organization.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... location or locations where activities are performed, the organizational structure for executing the... the organizational structure, the individual(s) assigned the responsibility for assuring effective... performing quality assurance functions must have sufficient authority and organizational freedom to—...

  13. Quality assurance: Importance of systems and standard operating procedures.

    PubMed

    Manghani, Kishu

    2011-01-01

    It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company.

  14. Quality assurance: Importance of systems and standard operating procedures

    PubMed Central

    Manghani, Kishu

    2011-01-01

    It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company. PMID:21584180

  15. Predicting Software Assurance Using Quality and Reliability Measures

    DTIC Science & Technology

    2014-12-01

    found during development by testing and other methods . Based on an analysis of pump recalls and adverse events, the FDA concluded that many of the...Overview ix Abstract xiii 1 Introduction 1 2 Assurance 3 2.1 DoD Assurance Case Example 4 3 Analysis of Quality Cases 7 3.1 SEI Data 7 3.2 Defect...Prediction Models 8 3.3 In-Depth Analysis : Security Focused Example (Project A1) 11 3.3.1 Security Example Results 11 3.3.2 Security Example

  16. 49 CFR 179.7 - Quality assurance program.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Quality assurance program. 179.7 Section 179.7... Reports § 179.7 Quality assurance program. (a) At a minimum, each tank car facility shall have a quality... tank car; and (3) Prevents non-conformities from recurring. (b) At a minimum, the quality...

  17. 23 CFR 637.207 - Quality assurance program.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... ensure that the design-builder is providing the quality of materials and construction required by the... CONSTRUCTION INSPECTION AND APPROVAL Quality Assurance Procedures for Construction § 637.207 Quality assurance...) Quality control sampling and testing results may be used as part of the acceptance decision provided...

  18. 23 CFR 637.207 - Quality assurance program.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... ensure that the design-builder is providing the quality of materials and construction required by the... CONSTRUCTION INSPECTION AND APPROVAL Quality Assurance Procedures for Construction § 637.207 Quality assurance...) Quality control sampling and testing results may be used as part of the acceptance decision provided...

  19. 40 CFR Appendix B to Part 75 - Quality Assurance and Quality Control Procedures

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 16 2011-07-01 2011-07-01 false Quality Assurance and Quality Control... and Quality Control Procedures 1. Quality Assurance/Quality Control Program Develop and implement a quality assurance/quality control (QA/QC) program for the continuous emission monitoring systems,...

  20. 40 CFR Appendix B to Part 75 - Quality Assurance and Quality Control Procedures

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 17 2013-07-01 2013-07-01 false Quality Assurance and Quality Control... and Quality Control Procedures 1. Quality Assurance/Quality Control Program Develop and implement a quality assurance/quality control (QA/QC) program for the continuous emission monitoring systems,...

  1. 40 CFR Appendix B to Part 75 - Quality Assurance and Quality Control Procedures

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Quality Assurance and Quality Control... and Quality Control Procedures 1. Quality Assurance/Quality Control Program Develop and implement a quality assurance/quality control (QA/QC) program for the continuous emission monitoring systems,...

  2. 40 CFR Appendix B to Part 75 - Quality Assurance and Quality Control Procedures

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Quality Assurance and Quality Control... and Quality Control Procedures 1. Quality Assurance/Quality Control Program Develop and implement a quality assurance/quality control (QA/QC) program for the continuous emission monitoring systems,...

  3. Flight Dynamics Mission Support and Quality Assurance Process

    NASA Technical Reports Server (NTRS)

    Oh, InHwan

    1996-01-01

    This paper summarizes the method of the Computer Sciences Corporation Flight Dynamics Operation (FDO) quality assurance approach to support the National Aeronautics and Space Administration Goddard Space Flight Center Flight Dynamics Support Branch. Historically, a strong need has existed for developing systematic quality assurance using methods that account for the unique nature and environment of satellite Flight Dynamics mission support. Over the past few years FDO has developed and implemented proactive quality assurance processes applied to each of the six phases of the Flight Dynamics mission support life cycle: systems and operations concept, system requirements and specifications, software development support, operations planing and training, launch support, and on-orbit mission operations. Rather than performing quality assurance as a final step after work is completed, quality assurance has been built in as work progresses in the form of process assurance. Process assurance activities occur throughout the Flight Dynamics mission support life cycle. The FDO Product Assurance Office developed process checklists for prephase process reviews, mission team orientations, in-progress reviews, and end-of-phase audits. This paper will outline the evolving history of FDO quality assurance approaches, discuss the tailoring of Computer Science Corporations's process assurance cycle procedures, describe some of the quality assurance approaches that have been or are being developed, and present some of the successful results.

  4. Radiographic Film Processing Quality Assurance: A Self-Teaching Workbook. Quality Assurance Series.

    ERIC Educational Resources Information Center

    Goldman, Lee W.

    This workbook has been designed for use in conjunction with the manual, "Photographic Quality Assurance in Diagnostic Radiology, Nuclear Medicine and Radiation Therapy." Presented are several typical problems arising from the existence of variability and fluctuations in the automatic processing of radiographs, which unless corrected, can…

  5. 48 CFR 246.408 - Single-agency assignments of Government contract quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... of Government contract quality assurance. 246.408 Section 246.408 Federal Acquisition Regulations... ASSURANCE Government Contract Quality Assurance 246.408 Single-agency assignments of Government contract quality assurance....

  6. Quality assurance and quality control in clinical cytogenetics.

    PubMed

    Mikhail, Fady M; Watson, Michael S

    2014-07-14

    The goal of any clinical laboratory should be to provide patients with the most accurate test results possible. This is accomplished through various overlapping programs that continuously monitor and optimize all aspects of a test, including decisions by the laboratory to offer a test, the decision of providers to request the test, the testing itself, and the reporting of results to the referral source and patient. The levels at which test performance and accuracy can be optimized are encompassed under quality control (QC) and quality assurance (QA). The monitoring of QC and QA problems allows for the integration of these parameters into a total quality management program. This unit reviews QC and QA guidelines, in addition to discussing how to establish a quality assurance program.

  7. 222-S Laboratory Quality Assurance Plan. Revision 1

    SciTech Connect

    Meznarich, H.K.

    1995-07-31

    This Quality Assurance Plan provides,quality assurance (QA) guidance, regulatory QA requirements (e.g., 10 CFR 830.120), and quality control (QC) specifications for analytical service. This document follows the U.S Department of Energy (DOE) issued Hanford Analytical Services Quality Assurance Plan (HASQAP). In addition, this document meets the objectives of the Quality Assurance Program provided in the WHC-CM-4-2, Section 2.1. Quality assurance elements required in the Guidelines and Specifications for Preparing Quality Assurance Program Plans (QAMS-004) and Interim Guidelines and Specifications for Preparing Quality Assurance Project Plans (QAMS-005) from the US Environmental Protection Agency (EPA) are covered throughout this document. A quality assurance index is provided in the Appendix A. This document also provides and/or identifies the procedural information that governs laboratory operations. The personnel of the 222-S Laboratory and the Standards Laboratory including managers, analysts, QA/QC staff, auditors, and support staff shall use this document as guidance and instructions for their operational and quality assurance activities. Other organizations that conduct activities described in this document for the 222-S Laboratory shall follow this QA/QC document.

  8. Quality Assurance for Essential Climate Variables

    NASA Astrophysics Data System (ADS)

    Folkert Boersma, K.; Muller, Jan-Peter

    2015-04-01

    Satellite data are of central interest to the QA4ECV project. Satellites have revolutionized the Earth's observation system of climate change and air quality over the past three decades, providing continuous data for the entire Earth. However, many users of these data are lost in the fog as to the quality of these satellite data. Because of this, the European Union expressed in its 2013 FP7 Space Research Call a need for reliable, traceable, and understandable quality information on satellite data records that could serve as a blueprint contribution to a future Copernicus Climate Change Service. The potential of satellite data to benefit climate change and air quality services is too great to be ignored. QA4ECV therefore bridges the gap between end-users of satellite data and the satellite data products. We are developing an internationally acceptable Quality Assurance (QA) framework that provides understandable and traceable quality information for satellite data used in climate and air quality services. Such a framework should deliver the historically linked long-term data sets that users need, in a format that they can readily use. QA4ECV has approached more than 150 users and suppliers of satellite data to collect their needs and expectations. The project will use their response as a guideline for developing user-friendly tools to obtain information on the completeness, accuracy, and fitness-for-purpose of the satellite datasets. QA4ECV collaborates with 4 joint FP7 Space projects in reaching out to scientists, policy makers, and other end-users of satellite data to improve understanding of the special challenges -and also opportunities- of working with satellite data for climate and air quality purposes. As a demonstration of its capacity, QA4ECV will generate multi-decadal climate data records for 3 atmospheric ECV precursors (nitrogen dioxide, formaldehyde, and carbon monoxide) and 3 land ECVs (albedo, leaf area index and absorbed photosynthetically active

  9. Quality assurance guides health reform in Jordan.

    PubMed

    Abubaker, W; Abdulrahman, M

    1996-01-01

    In November 1995, a World Bank mission went to Jordan to conduct a study of the health sector. The study recommended three strategies to reform the health sector: decentralization of Ministry of Health (MOH) management; improvement of clinical practices, quality of care, and consumer satisfaction; and adoption of treatment protocols and standards. The MOH chose quality assurance (QA) methods and quality management (QM) techniques to accomplish these reforms. The Monitoring and QA Directorate oversees QA applications within MOH. It also institutes and develops the capacity of local QA units in the 12 governorates. The QA units implement and monitor day-to-day QA activities. The QM approach encompasses quality principles: establish objectives; use a systematic approach; teach lessons learned and applicable research; use QA training to teach quality care, quality improvement, and patient satisfaction; educate health personnel about QM approaches; use assessment tools and interviews; measure the needs and expectations of local health providers and patients; ensure feedback on QA improvement projects; ensure valid and reliable data; monitor quality improvement efforts; standardize systemic data collection and outcomes; and establish and disseminate QA standards and performance improvement efforts. The Jordan QA Project has helped with the successful institutionalization of a QA system at both the central and local levels. The bylaws of the QA councils and committees require team participation in the decision-making process. Over the last two years, the M&QA Project has adopted 21 standards for nursing, maternal and child health care centers, pharmacies, and medications. The Balqa pilot project has developed 44 such protocols. Quality improvement (COUGH) studies have examined hyper-allergy, analysis of patient flow rate, redistribution of nurses, vaccine waste, and anemic pregnant women. There are a considerable number of on-going clinical and non-clinical COUGH studies

  10. 48 CFR 2146.270 - FEGLI Program quality assurance requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Quality Requirements 2146.270 FEGLI Program quality assurance requirements. (a) The... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false FEGLI Program...

  11. The Value of Student Engagement for Higher Education Quality Assurance

    ERIC Educational Resources Information Center

    Coates, Hamish

    2005-01-01

    As the principles and practices of quality assurance are further implanted in higher education, methodological questions about how to understand and manage quality become increasingly important. This paper argues that quality assurance determinations need to take account of how and to what extent students engage with activities that are likely to…

  12. Institutional Response to the Swedish Model of Quality Assurance.

    ERIC Educational Resources Information Center

    Nilsson, Karl-Axel; Wahlen, Staffan

    2000-01-01

    Evaluates the Swedish model of quality assurance of higher education by examining the response of institutions to 27 quality audits and 19 follow-up interviews. Discusses the relationship between top-down and bottom-up approaches to internal quality assurance and suggests that, with growing professionalization, more limited result-oriented audits…

  13. Quality Assurance and e-Learning: Blue Skies and Pragmatism

    ERIC Educational Resources Information Center

    Oliver, Ron

    2005-01-01

    This paper considers the role of quality assurance in e-learning; reflecting on the conditions necessary for successful e-learning. It reviews some of the current international work on quality assurance in this area and goes on to consider the ways in which the quality of a process or activity can be assessed--focusing on the use of benchmarking…

  14. Quality Assurance in Higher Education as a Political Process

    ERIC Educational Resources Information Center

    Skolnik, Michael L.

    2010-01-01

    The procedures commonly employed for quality assurance in higher education are designed as if the endeavour were a technical process, whereas it may be more useful to view it as a political process. For example, quality assurance requires making choices among competing conceptions of quality, and in so doing privileges some interests over others.…

  15. 48 CFR 2146.270 - FEGLI Program quality assurance requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Quality Requirements 2146.270 FEGLI Program quality assurance requirements. (a) The... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false FEGLI Program...

  16. Educational Quality Assurance in Universities: An Enhanced Model.

    ERIC Educational Resources Information Center

    Boyle, Patrick; Bowden, John A.

    1997-01-01

    Presents a model of quality assurance for colleges and universities, distilled from key concepts in the literature about quality assurance and higher education culture and practice. The model has continuous quality improvement in student learning at its center, and includes elements of institutional values, faculty evaluation and development,…

  17. 10 CFR 72.140 - Quality assurance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... component will perform satisfactorily in service. Quality assurance includes quality control, which... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance requirements. 72.140 Section 72.140... SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE...

  18. 10 CFR 830.121 - Quality Assurance Program (QAP).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality..., unless it is approved or rejected by DOE at an earlier date. (2) Modify the QAP as directed by DOE....

  19. 10 CFR 830.121 - Quality Assurance Program (QAP).

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality..., unless it is approved or rejected by DOE at an earlier date. (2) Modify the QAP as directed by DOE....

  20. 10 CFR 830.121 - Quality Assurance Program (QAP).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality..., unless it is approved or rejected by DOE at an earlier date. (2) Modify the QAP as directed by DOE....

  1. Compliance with Aerospace Quality Assurance Standard AS9100

    NASA Technical Reports Server (NTRS)

    Hughitt, Brian

    2009-01-01

    The contents include: 1) United States Federal Acquisition Regulations (FAR) Part 46, Quality Assurance; 2) NASA Quality Roadmap; 3) AS9003 Inspection and Test Quality Management System; 4) Government Oversight Responsibilities; and 5) Third Party vs Second Party Oversight.

  2. Data Validation & Laboratory Quality Assurance for Region 9

    EPA Pesticide Factsheets

    In all hazardous site investigations, it is essential to know the quality of the data used for decision-making purposes. Validation of data requires that appropriate quality assurance and quality control (QA/QC) procedures be followed.

  3. Quality assurance in gastrointestinal endoscopy: An Egyptian experience.

    PubMed

    Gado, Ahmed S; Ebeid, Basel A; Axon, Anthony T

    2016-12-01

    Over the last four decades, gastrointestinal endoscopy has become of paramount importance to diagnose, treat and prevent diseases of the digestive tract. Practice variation, however, is likely to have an important effect on the effectiveness of endoscopy and can impair the delivery of high-quality endoscopic procedures. There have been increasing demands to assess the quality of service and track and improve patient outcomes. Quality assurance has paved its way into professional guidelines for physicians. Developing a modern endoscopy unit demands the institution of a quality assurance programme, continuous training and monitoring of service delivery. This article describes our experience in implementing a quality assurance programme in endoscopy in a secondary care government hospital in Egypt. The implementation of quality assurance and improvement programme can lead to dramatic improvements in the quality of endoscopic care and patient outcomes. Quality assurance and continual improvement can be applied in developing countries.

  4. [Cross-sectoral quality assurance in ambulatory care].

    PubMed

    Albrecht, Martin; Loos, Stefan; Otten, Marcus

    2013-01-01

    Overcoming rigid sectoral segmentation in healthcare has also become a health policy target in quality assurance. With the Act to Enhance Competition in Statutory Health Insurance (GKV-WSG) coming into effect, quality assurance measures are to be designed in a cross-sectoral fashion for in- and outpatient sectors equally. An independent institution is currently mandated to develop specific quality indicators for eleven indications. For three of these operating tests have already been commissioned by the Federal Joint Committee. This article depicts the major results of a feasibility study, including a compliance cost estimate, for the aforementioned indications of cross-sectoral quality assurance (cQA). In conclusion, a number of both practical and conceptual basic challenges are still to be resolved prior to the full implementation of cQA, such as a sufficient specification to activate documentation requirements and an inspection system capable of separating actual quality problems from documentary deficits. So far, a comprehensive cost-utility analysis of cQA has not been provided, in particular with comparison to existing QA systems. In order to optimise cost and utility of cQA an evidence-based approach is required for both the extension of cQA areas and for QA provisions.

  5. SAPHIRE 8 Volume 6 - Quality Assurance

    SciTech Connect

    C. L. Smith; R. Nims; K. J. Kvarfordt

    2011-03-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Version 8 is a software application developed for performing a complete probabilistic risk assessment using a personal computer running the Microsoft Windows™ operating system. SAPHIRE 8 is funded by the U.S. Nuclear Regulatory Commission (NRC). The role of the INL in this project is that of software developer and tester. This development takes place using formal software development procedures and is subject to quality assurance (QA) processes. The purpose of this document is to describe how the SAPHIRE software QA is performed for Version 8, what constitutes its parts, and limitations of those processes. In addition, this document describes the Independent Verification and Validation that was conducted for Version 8 as part of an overall QA process.

  6. SAPHIRE 8 Software Quality Assurance Plan

    SciTech Connect

    Curtis Smith

    2010-02-01

    This Quality Assurance (QA) Plan documents the QA activities that will be managed by the INL related to JCN N6423. The NRC developed the SAPHIRE computer code for performing probabilistic risk assessments (PRAs) using a personal computer (PC) at the Idaho National Laboratory (INL) under Job Code Number (JCN) L1429. SAPHIRE started out as a feasibility study for a PRA code to be run on a desktop personal PC and evolved through several phases into a state-of-the-art PRA code. The developmental activity of SAPHIRE was the result of two concurrent important events: The tremendous expansion of PC software and hardware capability of the 90s and the onset of a risk-informed regulation era.

  7. Quality assurance - no margin for error

    SciTech Connect

    Thomas, R.L.; Smith, C.F.; Grant, W.D.

    1982-01-01

    Quality assurance (QA), a critical component of a hydraulic fracturing treatment, must be performed prior to and during the job. Failure to follow QA procedures may result in added well costs and poor production. It begins during the design and ends after the completion of the job. The importance of QA has been magnified due to the increased size and complexity fracturing treatments. It is a tool used to insure that fluids, proppants, and equipment meet the increased demands placed upon them. This study discusses several steps take in order to provide QA. An explanation of procedures used during the job design and prior to the job is given. A discussion of procedures and trouble shooting techniques used prior to and during the job also is presented. The sensors and computer system used in order to monitor QA data also are discussed.

  8. Hanford analytical services quality assurance requirements documents

    SciTech Connect

    Hyatt, J.E.

    1997-09-25

    Hanford Analytical Services Quality Assurance Requirements Document (HASQARD) is issued by the Analytical Services, Program of the Waste Management Division, US Department of Energy (US DOE), Richland Operations Office (DOE-RL). The HASQARD establishes quality requirements in response to DOE Order 5700.6C (DOE 1991b). The HASQARD is designed to meet the needs of DOE-RL for maintaining a consistent level of quality for sampling and field and laboratory analytical services provided by contractor and commercial field and laboratory analytical operations. The HASQARD serves as the quality basis for all sampling and field/laboratory analytical services provided to DOE-RL through the Analytical Services Program of the Waste Management Division in support of Hanford Site environmental cleanup efforts. This includes work performed by contractor and commercial laboratories and covers radiological and nonradiological analyses. The HASQARD applies to field sampling, field analysis, and research and development activities that support work conducted under the Hanford Federal Facility Agreement and Consent Order Tri-Party Agreement and regulatory permit applications and applicable permit requirements described in subsections of this volume. The HASQARD applies to work done to support process chemistry analysis (e.g., ongoing site waste treatment and characterization operations) and research and development projects related to Hanford Site environmental cleanup activities. This ensures a uniform quality umbrella to analytical site activities predicated on the concepts contained in the HASQARD. Using HASQARD will ensure data of known quality and technical defensibility of the methods used to obtain that data. The HASQARD is made up of four volumes: Volume 1, Administrative Requirements; Volume 2, Sampling Technical Requirements; Volume 3, Field Analytical Technical Requirements; and Volume 4, Laboratory Technical Requirements. Volume 1 describes the administrative requirements

  9. The Role of Peer Review in Norwegian Quality Assurance: Potential Consequences for Excellence and Diversity

    ERIC Educational Resources Information Center

    Langfeldt, Liv; Stensaker, Bjorn; Harvey, Lee; Huisman, Jeroen; Westerheijden, Don F.

    2010-01-01

    The article analyses the role of peer review within broader external quality assurance schemes. Based on an analytical framework emphasising that modern quality assurance schemes are designed as a balancing act between standardised guidelines and professional judgement, the article uses data from a recent evaluation of NOKUT, the Norwegian Quality…

  10. Quality Assurance Processes in Finnish Universities: Direct and Indirect Outcomes and Organisational Conditions

    ERIC Educational Resources Information Center

    Haapakorpi, Arja

    2011-01-01

    In Finland, quality assurance related to the Bologna process has been adapted to existing systems of higher education at the national level and a form of implementation is also recognised at the level of the higher education institution. In universities, varied outcomes of quality assurance are based on interaction of organisational structures,…

  11. A Strategic Quality Assurance Framework in an African Higher Education Context

    ERIC Educational Resources Information Center

    Ansah, Francis

    2015-01-01

    This study is based on a pragmatist analysis of selected international accounts on quality assurance in higher education. A pragmatist perspective was used to conceptualise a logical internal quality assurance model to embed and support the alignment of graduate competencies in curriculum and assessment of Ghanaian polytechnics. Through focus…

  12. Quality Assurance in Engineering Education: Comparison of Accreditation Schemes and ISO 9001.

    ERIC Educational Resources Information Center

    Karapetrovic, Stanislav; Rajamani, Divakar; Willborn, Walter

    1998-01-01

    Outlines quality assurance schemes for distance-education technologies that are based on the ISO 9000 family of international quality-assurance standards. Argues that engineering faculties can establish such systems on the basis of and integrated with accreditation schemes. Contains 34 references. (DDR)

  13. 40 CFR 75.21 - Quality assurance and quality control requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 17 2013-07-01 2013-07-01 false Quality assurance and quality control... assurance and quality control requirements. (a) Continuous emission monitoring systems. The owner or... system according to the quality assurance and quality control procedures in appendix B of this part....

  14. 40 CFR 75.21 - Quality assurance and quality control requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Quality assurance and quality control... assurance and quality control requirements. (a) Continuous emission monitoring systems. The owner or... system according to the quality assurance and quality control procedures in appendix B of this part....

  15. 40 CFR 75.21 - Quality assurance and quality control requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Quality assurance and quality control... assurance and quality control requirements. (a) Continuous emission monitoring systems. The owner or... system according to the quality assurance and quality control procedures in appendix B of this part....

  16. 40 CFR 75.21 - Quality assurance and quality control requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 16 2011-07-01 2011-07-01 false Quality assurance and quality control... assurance and quality control requirements. (a) Continuous emission monitoring systems. The owner or... system according to the quality assurance and quality control procedures in appendix B of this part....

  17. Quality Assurance Project Plan: Connecticut wetlands study

    SciTech Connect

    Sherman, A.; Gwin, S.

    1991-04-01

    EPA's Wetland Research Program has supported a major effort to study wetlands mitigation projects in the field. The field studies were designed to: (1) evaluate the project plans; (2) compare the projects with natural wetlands in the same land use setting; and (3) describe the development of the projects over time. The information from the studies will be used as technical guidance for setting performance criteria and developing design guidelines for mitigation projects. Pilot studies have been conducted in Oregon, Washington, Florida, and Connecticut. The report presents the methods and associated quality assurance procedures used during the Connecticut study. A major objective of the pilot study was to evaluate the field procedures and the data quality assessment protocols used. The authors are in the process of performing that evaluation. They anticipate that in some cases they will adopt the procedure, while others will be refined or discarded. Therefore, the authors caution the user of the document that, at this point, the EPA makes no claims or endorsement of the use of the field, laboratory, or data quality assessment procedures associated with the study.

  18. Role of Informatics in Patient Safety and Quality Assurance.

    PubMed

    Nakhleh, Raouf E

    2015-06-01

    Quality assurance encompasses monitoring daily processes for accurate, timely, and complete reports in surgical pathology. Quality assurance also includes implementation of policies and procedures that prevent or detect errors in a timely manner. This article presents uses of informatics in quality assurance. Three main foci are critical to the general improvement of diagnostic surgical pathology. First is the application of informatics to specimen identification with lean methods for real-time statistical control of specimen receipt and processing. Second is the development of case reviews before sign-out. Third is the development of information technology in communication of results to assure treatment in a timely manner.

  19. History of Reliability and Quality Assurance at Kennedy Space Center

    NASA Technical Reports Server (NTRS)

    Childers, Frank M.

    2004-01-01

    This Kennedy Historical Document (KHD) provides a unique historical perspective of the organizational and functional responsibilities for the manned and un-manned programs at Kennedy Space Center, Florida. As systems become more complex and hazardous, the attention to detailed planning and execution continues to be a challenge. The need for a robust reliability and quality assurance program will always be a necessity to ensure mission success. As new space missions are defined and technology allows for continued access to space, these programs cannot be compromised. The organizational structure that has provided the reliability and quality assurance functions for both the manned and unmanned programs has seen many changes since the first group came to Florida in the 1950's. The roles of government and contractor personnel have changed with each program and organizational alignment has changed based on that responsibility. The organizational alignment of the personnel performing these functions must ensure independent assessment of the processes.

  20. Evaluation of plan quality assurance models for prostate cancer patients based on fully automatically generated Pareto-optimal treatment plans

    NASA Astrophysics Data System (ADS)

    Wang, Yibing; Breedveld, Sebastiaan; Heijmen, Ben; Petit, Steven F.

    2016-06-01

    IMRT planning with commercial Treatment Planning Systems (TPSs) is a trial-and-error process. Consequently, the quality of treatment plans may not be consistent among patients, planners and institutions. Recently, different plan quality assurance (QA) models have been proposed, that could flag and guide improvement of suboptimal treatment plans. However, the performance of these models was validated using plans that were created using the conventional trail-and-error treatment planning process. Consequently, it is challenging to assess and compare quantitatively the accuracy of different treatment planning QA models. Therefore, we created a golden standard dataset of consistently planned Pareto-optimal IMRT plans for 115 prostate patients. Next, the dataset was used to assess the performance of a treatment planning QA model that uses the overlap volume histogram (OVH). 115 prostate IMRT plans were fully automatically planned using our in-house developed TPS Erasmus-iCycle. An existing OVH model was trained on the plans of 58 of the patients. Next it was applied to predict DVHs of the rectum, bladder and anus of the remaining 57 patients. The predictions were compared with the achieved values of the golden standard plans for the rectum D mean, V 65, and V 75, and D mean of the anus and the bladder. For the rectum, the prediction errors (predicted-achieved) were only  -0.2  ±  0.9 Gy (mean  ±  1 SD) for D mean,-1.0  ±  1.6% for V 65, and  -0.4  ±  1.1% for V 75. For D mean of the anus and the bladder, the prediction error was 0.1  ±  1.6 Gy and 4.8  ±  4.1 Gy, respectively. Increasing the training cohort to 114 patients only led to minor improvements. A dataset of consistently planned Pareto-optimal prostate IMRT plans was generated. This dataset can be used to train new, and validate and compare existing treatment planning QA models, and has been made publicly available. The OVH model was highly accurate

  1. Evaluation of plan quality assurance models for prostate cancer patients based on fully automatically generated Pareto-optimal treatment plans.

    PubMed

    Wang, Yibing; Breedveld, Sebastiaan; Heijmen, Ben; Petit, Steven F

    2016-06-07

    IMRT planning with commercial Treatment Planning Systems (TPSs) is a trial-and-error process. Consequently, the quality of treatment plans may not be consistent among patients, planners and institutions. Recently, different plan quality assurance (QA) models have been proposed, that could flag and guide improvement of suboptimal treatment plans. However, the performance of these models was validated using plans that were created using the conventional trail-and-error treatment planning process. Consequently, it is challenging to assess and compare quantitatively the accuracy of different treatment planning QA models. Therefore, we created a golden standard dataset of consistently planned Pareto-optimal IMRT plans for 115 prostate patients. Next, the dataset was used to assess the performance of a treatment planning QA model that uses the overlap volume histogram (OVH). 115 prostate IMRT plans were fully automatically planned using our in-house developed TPS Erasmus-iCycle. An existing OVH model was trained on the plans of 58 of the patients. Next it was applied to predict DVHs of the rectum, bladder and anus of the remaining 57 patients. The predictions were compared with the achieved values of the golden standard plans for the rectum D mean, V 65, and V 75, and D mean of the anus and the bladder. For the rectum, the prediction errors (predicted-achieved) were only  -0.2  ±  0.9 Gy (mean  ±  1 SD) for D mean,-1.0  ±  1.6% for V 65, and  -0.4  ±  1.1% for V 75. For D mean of the anus and the bladder, the prediction error was 0.1  ±  1.6 Gy and 4.8  ±  4.1 Gy, respectively. Increasing the training cohort to 114 patients only led to minor improvements. A dataset of consistently planned Pareto-optimal prostate IMRT plans was generated. This dataset can be used to train new, and validate and compare existing treatment planning QA models, and has been made publicly available. The OVH model was highly accurate

  2. A Rotational Blended Learning Model: Enhancement and Quality Assurance

    ERIC Educational Resources Information Center

    Ghoul, Said

    2013-01-01

    Research on blended learning theory and practice is growing nowadays with a focus on the development, evaluation, and quality assurance of case studies. However, the enhancement of blended learning existing models, the specification of their online parts, and the quality assurance related specifically to them have not received enough attention.…

  3. The Landscape of Quality Assurance in Distance Education

    ERIC Educational Resources Information Center

    Scull, W. Reed; Kendrick, David; Shearer, Rick; Offerman, Dana

    2011-01-01

    Distance education permeates the field of professional and continuing education to such an extent that quality assurance (QA) is a topic no distance educator or administrator should avoid. Quality assurance is an issue not just for continuing education but also for higher education generally. Given the disruptive impact of distance education and…

  4. Focusing on Quality Assurance--The Profession's Collective Efforts.

    ERIC Educational Resources Information Center

    Klyop, John S.

    1989-01-01

    The American Dental Association Office of Quality Assurance's current programs include liaison with national health organizations, a comprehensive report of quality assurance, a health policy agenda for the American people, encouragement of peer review organizations, a Joint Commission on Accreditation of Healthcare Organizations, and…

  5. 40 CFR Appendix C to Part 61 - Quality Assurance Procedures

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 8 2011-07-01 2011-07-01 false Quality Assurance Procedures C Appendix C to Part 61 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...—Quality Assurance Procedures Procedure 1—Determination of Adequate Chromatographic Peak Resolution In...

  6. QUALITY ASSURANCE IN RESEARCH LABORATORIES: RULES AND REASON

    EPA Science Inventory

    Quality Assurance in Research Laboratories: Rules and Reason

    Ron Rogers, Quality Assurance and Records Manager, Environmental Carcinogenesis Division, NHEERL/ORD/US EPA, Research Triangle Park, NC, 27709

    To anyone who has actively participated in research, as I have...

  7. Internal Quality Assurance Benchmarking. ENQA Workshop Report 20

    ERIC Educational Resources Information Center

    Blackstock, Douglas; Burquel, Nadine; Comet, Nuria; Kajaste, Matti; dos Santos, Sergio Machado; Marcos, Sandra; Moser, Marion; Ponds, Henri; Scheuthle, Harald; Sixto, Luis Carlos Velon

    2012-01-01

    The Internal Quality Assurance group of ENQA (IQA Group) has been organising a yearly seminar for its members since 2007. The main objective is to share experiences concerning the internal quality assurance of work processes in the participating agencies. The overarching theme of the 2011 seminar was how to use benchmarking as a tool for…

  8. Monitoring and Assuring the Quality of Digital Aerial Data

    NASA Technical Reports Server (NTRS)

    Christopherson, Jon

    2007-01-01

    This viewgraph presentation explains the USGS plan for monitoring and assuring the quality of digital aerial data. The contents include: 1) History of USGS Aerial Imaging Involvement; 2) USGS Research and Results; 3) Outline of USGS Quality Assurance Plan; 4) Other areas of Interest; and 5) Summary

  9. 40 CFR Appendix C to Part 61 - Quality Assurance Procedures

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Quality Assurance Procedures C Appendix...—Quality Assurance Procedures Procedure 1—Determination of Adequate Chromatographic Peak Resolution In this....” Procedure 2—Procedure for Field Auditing GC Analysis Responsibilities of audit supervisor and analyst at...

  10. Understanding Quality Assurance: A Cross Country Case Study

    ERIC Educational Resources Information Center

    Choon Boey Lim, Fion

    2008-01-01

    Purpose: The purpose of this paper is to examine the level of understanding between an Australian university and its offshore partner institution, on quality assurance. It attempts to highlight the dynamics of quality assurance policy implementation within and across institutions for an offshore degree. Design/methodology/approach: The study used…

  11. Operational Environmental Monitoring Program Quality Assurance Project Plan

    SciTech Connect

    Perkins, C.J.

    1994-08-01

    This Quality Assurance Project Plan addresses the quality assurance requirements for the activities associated with the preoperational and operational environmental monitoring performed by Westinghouse Hanford Company as it implements the Operational Environmental Monitoring program. This plan applies to all sampling and monitoring activities performed by Westinghouse Hanford Company in implementing the Operational Environmental Monitoring program at the Hanford Site.

  12. Democratisation and Quality Assurance in South African Higher Education

    ERIC Educational Resources Information Center

    Symes, Ashley

    2006-01-01

    The article interprets a particular set of debates on whether quality assurance in South African higher education widens democracy or not. The interpretation explores the extent to which higher education quality assurance fulfils three conditions posited for democracy (inclusion, participation and enhancement), drawing in as points of reference…

  13. Quality Assurance Toolkit for Distance Higher Education Institutions and Programmes

    ERIC Educational Resources Information Center

    Rama, Kondapalli, Ed.; Hope, Andrea, Ed.

    2009-01-01

    The Commonwealth of Learning is proud to partner with the Sri Lankan Ministry of Higher Education and UNESCO to produce this "Quality Assurance Toolkit for Distance Higher Education Institutions and Programmes". The Toolkit has been prepared with three features. First, it is a generic document on quality assurance, complete with a…

  14. Quality Assurance in South Africa: A Reply to John Mammen

    ERIC Educational Resources Information Center

    le Grange, L.

    2006-01-01

    In this article I point out that prominence given to higher education quality assurance by contemporary states might be viewed in the context of the ascendance of neoliberalism over the past few decades and a concomitant culture of performativity. However, I argue for a shift in the angle of vision on performativity and quality assurance through a…

  15. 45 CFR 800.402 - Contract quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 3 2013-10-01 2013-10-01 false Contract quality assurance. 800.402 Section 800.402 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF PERSONNEL MANAGEMENT MULTI-STATE PLAN PROGRAM Compliance § 800.402 Contract quality assurance. (a) General. This...

  16. 45 CFR 800.402 - Contract quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 3 2014-10-01 2014-10-01 false Contract quality assurance. 800.402 Section 800.402 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF PERSONNEL MANAGEMENT MULTI-STATE PLAN PROGRAM Compliance § 800.402 Contract quality assurance. (a) General. This...

  17. Policy of Quality Assurance in Hong Kong Preschools

    ERIC Educational Resources Information Center

    Dora, Ho Choi-wa

    2007-01-01

    This article discusses the sources, processes and impact of the quality assurance policy implemented in Hong Kong preschools. Regarded as a sort of policy alignment between the subsystems of pre-primary, primary and secondary education, the introduction of a quality assurance policy has been directly and indirectly transforming the settlements in…

  18. Quality Assurance of Joint Programmes. ENQA Workshop Report 19

    ERIC Educational Resources Information Center

    Frederiks, Mark; Grifoll, Josep; Hiltunen, Kirsi; Hopbach, Achim

    2012-01-01

    In view of the Bologna ministerial conference to be held in April 2012 in Bucharest, ENQA organised a seminar in September 2011 on Quality Assurance of Joint Programmes in collaboration with the Austrian Accreditation Council (OAR). The purpose of this seminar was twofold: first, to analyse the experience already gained in quality assurance of…

  19. Quality assurance program plan for radionuclide airborne emissions monitoring

    SciTech Connect

    Boom, R.J.

    1995-03-01

    This Quality Assurance Program Plan identifies quality assurance program requirements and addresses the various Westinghouse Hanford Company organizations and their particular responsibilities in regards to sample and data handling of airborne emissions. The Hanford Site radioactive airborne emissions requirements are defined in National Emissions Standards for Hazardous Air Pollutants (NESHAP), Code of Federal Regulations, Title 40, Part 61, Subpart H (EPA 1991a). Reporting of the emissions to the US Department of Energy is performed in compliance with requirements of US Department of Energy, Richland Operations Office Order 5400.1, General Environmental Protection Program (DOE-RL 1988). This Quality Assurance Program Plan is prepared in accordance with and to the requirements of QAMS-004/80, Guidelines and Specifications for Preparing Quality Assurance Program Plans (EPA 1983). Title 40 CFR Part 61, Appendix B, Method 114, Quality Assurance Methods (EPA 1991b) specifies the quality assurance requirements and that a program plan should be prepared to meet the requirements of this regulation. This Quality Assurance Program Plan identifies NESHAP responsibilities and how the Westinghouse Hanford Company Environmental, Safety, Health, and Quality Assurance Division will verify that the methods are properly implemented.

  20. Current Trends in European Quality Assurance. ENQA Workshop Report 8

    ERIC Educational Resources Information Center

    Bozo, Dhurata; Damian, Radu; Gonzalez, Cecilia de la Rosa; Helle, Emmi; Imoda, Franco; Kohler, Alexander; Papazoglou, Vassilios J.; Dalmau, Gemma Rauret; Shopov, Todor

    2009-01-01

    The present report is a product of two ENQA (European Association for Quality Assurance in Higher Education) seminars, held in 2007, on current trends in European Quality Assurance. The first seminar, hosted by the Bulgarian National Evaluation and Accreditation Agency (NEAA), examined the situation in South-Eastern Europe. The second seminar…

  1. Regulating and Quality-Assuring VET: International Developments. Research Report

    ERIC Educational Resources Information Center

    Misko, Josie

    2015-01-01

    The opening-up of the market for education and training, including vocational education and training (VET), has increased the importance of regulation and quality assurance mechanisms in ensuring the integrity of qualifications. This report investigates approaches to the regulation and quality assurance of vocational education and training in a…

  2. Quality Assurance Program Plan for radionuclide airborne emissions monitoring

    SciTech Connect

    Vance, L.M.

    1993-07-01

    This Quality Assurance Program Plan (QAPP) describes the quality assurance requirements and responsibilities for radioactive airborne emissions measurements activities from regulated stacks are controlled at the Hanford Site. Detailed monitoring requirements apply to stacks exceeding 1% of the standard of 10 mrem annual effective dose equivalent to the maximally exposed individual from operations of the Hanford Site.

  3. [Quality of vocational education in speech therapy - development and implementation of a quality assurance programme].

    PubMed

    Ullrich, A; Kawski, S; Koch, U; Härter, M

    2014-12-01

    The provision of high-quality health-services is only possible if it is based on vocational education of corresponding quality. To promote the quality of vocational education in speech therapy, a quality assurance programme was developed in a scientifically supervised multi-step process. The main goals of the quality assurance programme include: (i) external review of the quality of education by means of well-defined criteria, (ii) certification of schools that meet the requirements, and (iii) provision of feedback to schools about their results. A total of 208 quality indicators cover the essential aspects of vocational education in speech therapy, and apply to the structural, process and outcome quality. These indicators are based on a literature survey as well as on expert opinion, and are calibrated by data. The data are collected by using questionnaires (school management, teachers in speech therapy, students, consecutive patient sample) and are validated by specific document analyses and telephone audits. Each school receives an individual quality report of its achieved results benchmarked to other schools. Since the initial implementation in 2008, a total of 50 schools participated in the quality assurance programme and 41 achieved certification. Therefore, the defined set of quality criteria has been disseminated and utilized by about half of all German schools for vocational education in speech therapy. The evaluation of the data on quality collected across all schools highlights the strengths and weaknesses of vocational education as well as the demands for quality improvement.

  4. Quality Assurance in Endoscopy: Which Parameters?

    PubMed Central

    Denzer, Ulrike W.

    2016-01-01

    Background The verbalisation of quality standards and parameters by medical societies are relevant for qualitative improvement but may also be an instrument to demand more resources for health care or be a unique characteristic. Within the health care system 3 different quality levels can be defined: structure, process and result quality. Methods The current S2k guideline of the German Society for Gastroenterology (quality requirements for gastrointestinal endoscopy) AWMF registry no. 021-022 provides recommendations based on the available evidence for the structure quality (requirements for equipment, human resources) as well as for the process quality (patient preparation, conduct, documentation) and result quality (follow-up of specific endoscopic procedures). Results Based on these recommendations, measurable quality indicators/parameters for the endoscopy have been selected and formulated. General quality parameters for endoscopic examinations are given as well as quality parameters for specific procedures for the preparation, conduct, and follow-up of specific endoscopic interventions. Conclusion Only the regular review of processes and courses by means of defined measurement parameters builds up the basis for corrections based on facts. In addition, the implementation of recommended standards may be an instrument in demanding more resources from the health care system and, therefore, should be embedded as routine. PMID:27588295

  5. National Ignition Facility Quality Assurance Program Plan. Revision 1

    SciTech Connect

    Wolfe, C.R.; Yatabe, J.

    1996-09-01

    The National Ignition Facility (NIF) is a key constituent of the Department of Energy`s Stockpile Stewardship Program. The NIF will use inertial confinement fusion (ICF) to produce ignition and energy gain in ICF targets, and will perform weapons physics and high-energy- density experiments in support of national security and civilian objectives. The NIF Project is a national facility involving the collaboration of several DOE laboratories and subcontractors, including Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Sandia National Laboratory (SNL), and the University of Rochester Laboratory for Laser Energetics (UR/LLE). The primary mission of the NIF Project is the construction and start-up operation of laser-based facilities that will demonstrate fusion ignition in the laboratory to provide nuclear-weapons-related physics data, and secondarily, to propagate fusion burn aimed at developing a potential source of civilian energy. To support the accomplishment of this very important mission, the LLNL Laser Directorate created the NIF Project Office to organize and bring about the Project. The NIF Project Office has established this Quality Assurance Program to ensure its success. This issue of the Quality Assurance Program Plan (QAPP) adds the requirements for the conduct of Title 11 design, construction, procurement, and Title III engineering. This QAPP defines and describes the program-the management system-for specifying, achieving, and assuring the quality of all NIF Project work consistent with the policies of the Laboratory and the Laser Directorate.

  6. MoniQA: a general approach to monitor quality assurance

    NASA Astrophysics Data System (ADS)

    Jacobs, J.; Deprez, T.; Marchal, G.; Bosmans, H.

    2006-03-01

    MoniQA ("Monitor Quality Assurance") is a new, non-commercial, independent quality assurance software application developed in our medical physics team. It is a complete Java TM - based modular environment for the evaluation of radiological viewing devices and it thus fits in the global quality assurance network of our (film less) radiology department. The purpose of the software tool is to guide the medical physicist through an acceptance protocol and the radiologist through a constancy check protocol by presentation of the necessary test patterns and by automated data collection. Data are then sent to a central management system for further analysis. At the moment more than 55 patterns have been implemented, which can be grouped in schemes to implement protocols (i.e. AAPMtg18, DIN and EUREF). Some test patterns are dynamically created and 'drawn' on the viewing device with random parameters as is the case in a recently proposed new pattern for constancy testing. The software is installed on 35 diagnostic stations (70 monitors) in a film less radiology department. Learning time was very limited. A constancy check -with the new pattern that assesses luminance decrease, resolution problems and geometric distortion- takes only 2 minutes and 28 seconds per monitor. The modular approach of the software allows the evaluation of new or emerging test patterns. We will report on the software and its usability: practicality of the constancy check tests in our hospital and on the results from acceptance tests of viewing stations for digital mammography.

  7. EPA Guidance for Geospatially Related Quality Assurance Project Plans

    EPA Pesticide Factsheets

    This March 2003 document discusses EPA's Quality Assurance (QA) Project Plan as a tool for project managers and planners to document the type and quality of data and information needed for making environmental decisions

  8. Internal Quality Assurance--Enhancing Quality Culture. ENQA Workshop Report 16

    ERIC Educational Resources Information Center

    ENQA (European Association for Quality Assurance in Higher Education), 2010

    2010-01-01

    The European Association for Quality Assurance in Higher Education (ENQA), in cooperation with the Quality Assurance Agency (QAA, UK), organised a seminar on theme "Internal Quality Assurance--Enhancing quality culture" which was held on 8-9 June, 2010 in London, United Kingdom. The seminar marked the fourth annual meeting of the ENQA…

  9. [Quality measurement using administrative data in mandatory quality assurance].

    PubMed

    Heller, Günther; Szecsenyi, Joachim; Willms, Gerald; Broge, Björn

    2014-01-01

    For several years, the use of administrative data in mandatory quality measurement has been requested by several stakeholders in Germany. Main advantages of using administrative data include the reduction of documentary expenditures and the possibility to perform longitudinal quality analyses across different healthcare units. After a short introduction, a brief overview of the current use of administrative data for mandatory quality assurance as well as current developments is given, which will then be further exemplified by decubital ulcer prophylaxis. By using administrative data coding expenditures in this clinical area could be reduced by nine million data fields. At the same time the population analysed was expanded resulting in a more than tenfold increase in potentially quality-relevant events. Finally, perspectives, further developments, possibilities as well as limits of quality measurement with administrative data are discussed.

  10. A comprehensive framework for quality assurance in clinical trials

    NASA Astrophysics Data System (ADS)

    El Gazzar, Omar; Onken, Michael; Eichelberg, Marco; Hein, Andreas; Kotter, Elmar

    2012-02-01

    Biomarkers captured by medical images are increasingly used as indicators for the efficacy or safety of a certain drug or treatment for clinical trials. For example, medical images such as CT or MR are often used for extracting quantitative measurements for the assessment of tumor treatment response while evaluating a chemotherapy drug for therapeutic cancer trials. Quality assurance is defined as "All those planned and systematic actions that are established to ensure that the trial is performed and the data are generated, documented (recorded), and reported in compliance with good clinical practice (GCP) and the applicable regulatory requirement(s)" [1]. Our objective is to build a generalized and an automated framework for quality assurance within the clinical trials workflow. In order to reach this goal, a set of standardized software tools have been developed for quality assurance. Furthermore, we outline some guidelines as recommendations for the users handling the image data within the research workflow. The software tools developed include tools for image selection, image pseudonymization and image quality conformance check. The export tools are developed based on the specifications of the Integrating the Healthcare Enterprise (IHE) Teaching and Clinical Trial Export (TCE) profile. A DICOM-based quality conformance approach has been developed by validating the DICOM header attributes required for a certain imaging application (e.g. CAD, MPR, 3D) and comparing imaging acquisition parameters against the protocol specification. A formal description language is used to represent such quality requirements. For evaluation, imaging data collected from a clinical trial site were validated against Multi-Planar Reconstruction (MPR). We found that out of 60 studies, about 30% of image series volumes failed the MPR check for some common reasons.

  11. 48 CFR 46.402 - Government contract quality assurance at source.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... quality assurance at source. 46.402 Section 46.402 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.402 Government contract quality assurance at source. Agencies shall perform contract quality assurance,...

  12. 48 CFR 46.403 - Government contract quality assurance at destination.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... quality assurance at destination. 46.403 Section 46.403 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.403 Government contract quality assurance at destination. (a) Government contract quality assurance that can...

  13. Research and development quality assurance planning

    SciTech Connect

    Hoke, P.B.

    1990-05-14

    Planning for quality assurance (QA) in research and development (R D) is like stealing eggs without waking up the chickens. The QA program should be as unobtrusive as possible. Researchers require a QA program that affords them an environment capable of supporting repeatable experiments with accurate data without unduly stifling their creative abilities. Careful advance planning ensures that the intensity of control provided by quality-related systems is commensurate with the importance and scope of the activities being performed. Good scientific practices applied to small bench-scale projects may require minimal additional controls. As projects increase in size and complexity the controls imposed through planning must, by necessity, be increased. Research and development QA planning, just like any other planning, involves all affected individuals. The application of control systems is determined by factors such as customer or sponsor requirements, the importance of an item or activity to the experiment's success, and the organizational complexity of the project. Many larger experiments are highly dependent on quality-related support activities such as calibration, engineering design, and inspection provided by organizations outside the R D group. Since, in most cases, the expense of support activities is taken directly from funds available for research, it is important for the researchers to be involved in the planning efforts to help determine and agree with the level of QA effort required. A single plan will often suffice for organizations engaged in large numbers of similar experiments. Complex experiments may require unique QA plans or additions to existing plans. Once implemented, the R D QA plans, like any others, require audits or surveillances and may require revisions if the scope of the experiment changes. 1 ref., 1 fig.

  14. Quality Assurance in the European Higher Education Area: The Emergence of a German Market for Quality Assurance Agencies

    ERIC Educational Resources Information Center

    Serrano-Velarde, Kathia E.

    2008-01-01

    Most European countries have introduced systematic quality assurance as part of an overall governance reform aimed at enhancing universities' autonomy. Researchers and economic entrepreneurs tend, however, to underestimate the political dimension of accreditation and evaluation when they consider the contribution of quality assurance to the…

  15. The HERITAGE Family Study: quality assurance and quality control.

    PubMed

    Gagnon, J; Province, M A; Bouchard, C; Leon, A S; Skinner, J S; Wilmore, J H; Rao, D C

    1996-11-01

    The HERITAGE (HEalth, RIsk factors, exercise Training And GEnetics) Family Study is the first multicenter family clinical trial of its kind. Conducted by a consortium of five universities in the United States and Canada, the study has as its primary goal to document the role of the genotype in the cardiovascular, metabolic, and hormonal responses to aerobic exercise training. A comprehensive protocol was implemented at four Clinical Centers (CC) for the generation of data on sedentary subjects. This group included 450 caucasians from 90 nuclear families (father, mother, three children) and 200 black subjects from 40 to 100 family units over a 5-year period. The entire family was tested before and after a 20-week exercise training program. The fifth participating center, the Data Coordinating Center (DCC), is responsible for data management and data analysis. A Consortium Coordinating Center (CCC) responsible for the overall coordination and direction of the study was established at the Quebec CC. Quality assurance and quality control are jointly coordinated by the CCC and the DCC. A multicenter study of this magnitude requires careful standardization of all procedures and constant monitoring of quality control at all levels of operation. This report describes the quality assurance and quality control measures implemented in the HERITAGE Family Study, including some examples with real data.

  16. Tool Use Within NASA Software Quality Assurance

    NASA Technical Reports Server (NTRS)

    Shigeta, Denise; Port, Dan; Nikora, Allen P.; Wilf, Joel

    2013-01-01

    As space mission software systems become larger and more complex, it is increasingly important for the software assurance effort to have the ability to effectively assess both the artifacts produced during software system development and the development process itself. Conceptually, assurance is a straightforward idea - it is the result of activities carried out by an organization independent of the software developers to better inform project management of potential technical and programmatic risks, and thus increase management's confidence in the decisions they ultimately make. In practice, effective assurance for large, complex systems often entails assessing large, complex software artifacts (e.g., requirements specifications, architectural descriptions) as well as substantial amounts of unstructured information (e.g., anomaly reports resulting from testing activities during development). In such an environment, assurance engineers can benefit greatly from appropriate tool support. In order to do so, an assurance organization will need accurate and timely information on the tool support available for various types of assurance activities. In this paper, we investigate the current use of tool support for assurance organizations within NASA, and describe on-going work at JPL for providing assurance organizations with the information about tools they need to use them effectively.

  17. Quality assurance tool: taking a whole-system approach.

    PubMed

    Dowling, Claire; Patel, Seraphim Jr

    2014-11-27

    The London Cancer Alliance (LCA) has developed the Quality Clinical Board Exception Report (QCBER), a tool that supports delivery of quality assurance across its member organisations through its quality assurance framework and escalation protocol. The process improves quality assurance and performance in terms of patient safety, patient satisfaction and clinical outcomes. This article describes how implementation of a robust quality assurance process supported by a simple tool can help healthcare organisations improve patient care and avoid duplication when sharing quality information among providers and across healthcare systems. It also explains how application of the tool can help organisations build evidence of best practice in the five essential Care Quality Commission areas: safety, effectiveness, care, responsiveness and good management.

  18. AVLIS Production Plant Preliminary Quality Assurance Plan and Assessment

    SciTech Connect

    Not Available

    1984-11-15

    This preliminary Quality Assurance Plan and Assessment establishes the Quality Assurance requirements for the AVLIS Production Plant Project. The Quality Assurance Plan defines the management approach, organization, interfaces, and controls that will be used in order to provide adequate confidence that the AVLIS Production Plant design, procurement, construction, fabrication, installation, start-up, and operation are accomplished within established goals and objectives. The Quality Assurance Program defined in this document includes a system for assessing those elements of the project whose failure would have a significant impact on safety, environment, schedule, cost, or overall plant objectives. As elements of the project are assessed, classifications are provided to establish and assure that special actions are defined which will eliminate or reduce the probability of occurrence or control the consequences of failure. 8 figures, 18 tables.

  19. Quality Assurance Framework for Mini-Grids

    SciTech Connect

    Baring-Gould, Ian; Burman, Kari; Singh, Mohit; Esterly, Sean; Mutiso, Rose; McGregor, Caroline

    2016-11-01

    Providing clean and affordable energy services to the more than 1 billion people globally who lack access to electricity is a critical driver for poverty reduction, economic development, improved health, and social outcomes. More than 84% of populations without electricity are located in rural areas where traditional grid extension may not be cost-effective; therefore, distributed energy solutions such as mini-grids are critical. To address some of the root challenges of providing safe, quality, and financially viable mini-grid power systems to remote customers, the U.S. Department of Energy (DOE) teamed with the National Renewable Energy Laboratory (NREL) to develop a Quality Assurance Framework (QAF) for isolated mini-grids. The QAF for mini-grids aims to address some root challenges of providing safe, quality, and affordable power to remote customers via financially viable mini-grids through two key components: (1) Levels of service: Defines a standard set of tiers of end-user service and links them to technical parameters of power quality, power availability, and power reliability. These levels of service span the entire energy ladder, from basic energy service to high-quality, high-reliability, and high-availability service (often considered 'grid parity'); (2) Accountability and performance reporting framework: Provides a clear process of validating power delivery by providing trusted information to customers, funders, and/or regulators. The performance reporting protocol can also serve as a robust monitoring and evaluation tool for mini-grid operators and funding organizations. The QAF will provide a flexible alternative to rigid top-down standards for mini-grids in energy access contexts, outlining tiers of end-user service and linking them to relevant technical parameters. In addition, data generated through implementation of the QAF will provide the foundation for comparisons across projects, assessment of impacts, and greater confidence that will drive

  20. The NCI Thesaurus quality assurance life cycle.

    PubMed

    de Coronado, Sherri; Wright, Lawrence W; Fragoso, Gilberto; Haber, Margaret W; Hahn-Dantona, Elizabeth A; Hartel, Francis W; Quan, Sharon L; Safran, Tracy; Thomas, Nicole; Whiteman, Lori

    2009-06-01

    The National Cancer Institute Enterprise Vocabulary Services (NCI EVS) uses a wide range of quality assurance (QA) techniques to maintain and extend NCI Thesaurus (NCIt). NCIt is a reference terminology and biomedical ontology used in a growing number of NCI and other systems that extend from translational and basic research through clinical care to public information and administrative activities. Both automated and manual QA techniques are employed throughout the editing and publication cycle, which includes inserting and editing NCIt in NCI Metathesaurus. NCI EVS conducts its own additional periodic and ongoing content QA. External reviews, and extensive evaluation by and interaction with EVS partners and other users, have also played an important part in the QA process. There have always been tensions and compromises between meeting the needs of dependent systems and providing consistent and well-structured content; external QA and feedback have been important in identifying and addressing such issues. Currently, NCI EVS is exploring new approaches to broaden external participation in the terminology development and QA process.

  1. Total quality assurance and peer education.

    PubMed

    Croll, N; Jurs, E; Kennedy, S

    1993-05-01

    To promote program quality assurance, the Office of Health Promotion and Education at Penn State University evaluated peer health educators' presentation skills. Professional staff and experienced peer educators used an instrument tested for interobserver reliability to evaluate effectiveness in three skill areas: knowledge, delivery, and sensitivity. Each skill was rated, using a 4-point Likert-type scale. Knowledge included measures of preparation, subject knowledge, and ability to respond to questions knowledgeably; delivery included measures of clarity of directions, pacing, and transitions, appropriate and challenging questions, cooperation with co-facilitators, and enthusiasm; and sensitivity included comfort level, establishing trust in the group, nonjudgmentalism, appropriate use of humor, and nonsexist/nonheterosexist language. The evaluation teams observed and reviewed 18 work-shops conducted by 24 peer educators. Of the 24 educators evaluated, only 4 scored below 85%, the threshold for acceptable performance, and most scored above 90% in competency. Once baseline data had been gathered, the professional staff established a requirement that peer educators who did not meet this threshold must conduct their next two presentations with experienced peer educators who had met or exceeded it, and that professional staff members should work with students individually to improve skill levels. Evaluation criteria and threshold rates are to be reviewed each year.

  2. Quality assurance in determinations of brain death.

    PubMed

    Izac, Suzette Marie

    2004-09-01

    A 2002 study (Wang et al.) revealed the need to increase quality assurance (QA) activities to improve the declaration and documentation of brain death, thus improving the opportunity and potential for organ and tissue donation. One aspect of the QA concept is to provide checklists and training to physicians and hospital staff involved. Training will ensure that all personnel are sensitive to the complex process of brain death and the many diverse issues prevalent today. Checklists may be used to exclude other conditions or causes of irreversible coma and to verify the lack of appropriate reflexes in such patients. Electroneurodiagnostic (END) technologists may be asked to perform confirmatory tests in cases of suspected brain death, such as the EEG for electrocerebral inactivity (ECI), or the brainstem auditory or somatosensory evoked potentials. A look at published Guidelines will help ensure that END technologists perform these tests correctly. A solid understanding of the process ensures that diagnostic and technical mistakes are avoided and may provide helpful guidance to all involved. This paper also includes a brief look at some other available confirmatory tests, as well as some of the ethical issues involved.

  3. An Alternative View of Quality Assurance and Enhancement

    ERIC Educational Resources Information Center

    Wong, Viola Yuk-Yue

    2012-01-01

    This paper attempts to deal with the elusive nature of quality in quality management, using a case study to examine quality control measures implemented in an academic context and to show an emergent framework for quality enhancement. This paper introduces the concept of the ecology of quality assurance and examines efforts to maintain and advance…

  4. Is Quality Assurance in Higher Education Contextually Relative?

    ERIC Educational Resources Information Center

    Ntshoe, I.; Higgs, P.; Wolhuter, C. C.; Higgs, L. G.

    2010-01-01

    This article examines notions of quality and quality assurance in higher education. It does this by raising questions such as whether quality in higher education is the same as, for example, quality of clothing or the quality of meat in local butcheries. The article questions the assumption that if certain things, such as criteria or…

  5. 48 CFR 46.408 - Single-agency assignments of Government contract quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... the Department of Commerce. (b) Agencies requiring quality assurance support for acquiring these... of Government contract quality assurance. 46.408 Section 46.408 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract...

  6. 48 CFR 46.408 - Single-agency assignments of Government contract quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... the Department of Commerce. (b) Agencies requiring quality assurance support for acquiring these... of Government contract quality assurance. 46.408 Section 46.408 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract...

  7. 48 CFR 46.408 - Single-agency assignments of Government contract quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... the Department of Commerce. (b) Agencies requiring quality assurance support for acquiring these... of Government contract quality assurance. 46.408 Section 46.408 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract...

  8. 48 CFR 46.408 - Single-agency assignments of Government contract quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... the Department of Commerce. (b) Agencies requiring quality assurance support for acquiring these... of Government contract quality assurance. 46.408 Section 46.408 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract...

  9. Quality assurance in health care: past, present and future.

    PubMed

    Bilawka, E; Craig, B J

    2003-08-01

    Quality of health care delivery is a growing concern globally given current budget restraints and increasing demands on health care providers. The variety of quality assurance and quality management activities equals the numerous ways health care practitioners of all genres provide health care. Dental hygienists around the world must be knowledgeable about quality assurance and management in health care as it is a significant factor in the evolution of the dental hygiene profession and the quality of oral health care provided by dental hygienists. The objective of this research was to conduct a literature review on quality assurance and quality management. A MEDLINE search from 1966 to 2002 was conducted. The search resulted in approximately 145 articles. Additional references from works generated by the search were also obtained. The literature revealed information on the background and history of quality assurance and quality management. Much of the literature was devoted to discussions of the validity, reliability and effectiveness of most prominent quality management activities being utilised in health care today. The investigation revealed numerous issues and barriers surrounding quality management. This article concludes with suggestions for future directions of quality assurance and quality management.

  10. 40 CFR 160.35 - Quality assurance unit.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... standard operating procedures were made without proper authorization and documentation. (6) Review the final study report to assure that such report accurately describes the methods and standard operating... LABORATORY PRACTICE STANDARDS Organization and Personnel § 160.35 Quality assurance unit. (a) A...

  11. 40 CFR 160.35 - Quality assurance unit.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... standard operating procedures were made without proper authorization and documentation. (6) Review the final study report to assure that such report accurately describes the methods and standard operating... LABORATORY PRACTICE STANDARDS Organization and Personnel § 160.35 Quality assurance unit. (a) A...

  12. Cui Bono? The Relevance and Impact of Quality Assurance

    ERIC Educational Resources Information Center

    Massaro, Vin

    2010-01-01

    External quality assurance of universities exists to assure society that higher education standards are adequate and, in an increasingly global market, that they are comparable internationally. Although society has accepted an implicit compact in giving autonomy to universities in return for their dispassionate service to it, there has been an…

  13. Marshall Island radioassay quality assurance program an overview

    SciTech Connect

    Conrado, C.L.; Hamilton, T.F.; Kehl, S.R.; Robison, W.L.; Stoker, A.C.

    1998-09-01

    The Lawrence Livermore National Laboratory has developed an extensive quality assurance program to provide high quality data and assessments in support of the Marshall Islands Dose Assessment and Radioecology Program. Our quality assurance objectives begin with the premise of providing integrated and cost-effective program support (to meet wide-ranging programmatic needs, scientific peer review, litigation defense, and build public confidence) and continue through from design and implementation of large-scale field programs, sampling and sample preparation, radiometric and chemical analyses, documentation of quality assurance/quality control practices, exposure assessments, and dose/risk assessments until publication. The basic structure of our radioassay quality assurance/quality control program can be divided into four essential elements; (1) sample and data integrity control; (2) instrument validation and calibration; (3) method performance testing, validation, development and documentation; and (4) periodic peer review and on-site assessments. While our quality assurance objectives are tailored towards a single research program and the evaluation of major exposure pathways/critical radionuclides pertinent to the Marshall Islands, we have attempted to develop quality assurance practices that are consistent with proposed criteria designed for laboratory accre

  14. Delivery quality assurance with ArcCHECK

    SciTech Connect

    Neilson, Christopher; Klein, Michael; Barnett, Rob; Yartsev, Slav

    2013-04-01

    Radiation therapy requires delivery quality assurance (DQA) to ensure that treatment is accurate and closely follows the plan. We report our experience with the ArcCHECK phantom and investigate its potential optimization for the DQA process. One-hundred seventy DQA plans from 84 patients were studied. Plans were classified into 2 groups: those with the target situated on the diodes of the ArcCHECK (D plans) and those with the target situated at the center (C plans). Gamma pass rates for 8 target sites were examined. The parameters used to analyze the data included 3%/3 mm with the Van Dyk percent difference criteria (VD) on, 3%/3 mm with the VD off, 2%/2 mm with the VD on, and x/3 mm with the VD on and the percentage dosimetric agreement “x” for diode plans adjusted. D plans typically displayed maximum planned dose (MPD) on the cylindrical surface containing ArcCHECK diodes than center plans, resulting in inflated gamma pass rates. When this was taken into account by adjusting the percentage dosimetric agreement, C plans outperformed D plans by an average of 3.5%. ArcCHECK can streamline the DQA process, consuming less time and resources than radiographic films. It is unnecessary to generate 2 DQA plans for each patient; a single center plan will suffice. Six of 8 target sites consistently displayed pass rates well within our acceptance criteria; the lesser performance of head and neck and spinal sites can be attributed to marginally lower doses and increased high gradient of plans.

  15. Who Shall Control Entry to Teacher Education? North Carolina Quality Assurance Program.

    ERIC Educational Resources Information Center

    Knight, J. Pat

    A Quality Assurance Program (QAP) has been established by North Carolina as a means of assuring competent professional programs for teacher education. The QAP is based on two major premises: (1) Crucial competencies for teacher effectiveness can be identified, verified, and validated; and (2) Teacher education begins at initial entry and…

  16. Quality Assurance in Post-Secondary Education: Some Common Approaches

    ERIC Educational Resources Information Center

    Law, Dennis Chung Sea

    2010-01-01

    Purpose: The common approaches to quality assurance (QA), as practiced by most post-secondary education institutions for internal quality monitoring and most QA authorities for external quality monitoring (EQM), have been considered by many researchers as having largely failed to address the essence of educational quality. The purpose of this…

  17. IEEE Std 730 Software Quality Assurance: Supporting CMMI-DEV v1.3, Product and Process Quality Assurance

    DTIC Science & Technology

    2011-05-27

    TAG to ISO TC 176 Quality Management • Quality : ASQ, work experience • Software: three books, consulting, work experience • Systems: Telecom & DoD... management activities may be assured in accordance with the clauses of ISO 9001 . ©2011 Walz Map Process Areas to P730 Tasks 20 CMMI has several...frameworks 4 CMMI-DEV IEEE / ISO / IEC 15288 / 12207 Quality Assurance ©2011 Walz IEEE Life Cycle Processes & Artifacts • Systems Life Cycle Processes

  18. A monthly quality assurance procedure for 3D surface imaging.

    PubMed

    Wooten, H Omar; Klein, Eric E; Gokhroo, Garima; Santanam, Lakshmi

    2010-12-21

    A procedure for periodic quality assurance of a video surface imaging system is introduced. AlignRT is a video camera-based patient localization system that captures and compares images of a patient's topography to a DICOM-formatted external contour, then calculates shifts required to accurately reposition the patient. This technical note describes the tools and methods implemented in our department to verify correct and accurate operation of the AlignRT hardware and software components. The procedure described is performed monthly and complements a daily calibration of the system.

  19. Quality assurance procedures for V378A matrix resin

    NASA Technical Reports Server (NTRS)

    Hamermesh, C. L.; Dynes, P. J.

    1985-01-01

    A characterization methodology has been developed on which to base quality assurance procedures for U.S. Polymeric V378A bismaleimide matrix resin. Chemical composition is established by partition reverse phase and size exclusion liquid chromatography. Cure rheology behavior is quantitatively characterized by dynamic viscoelastic analysis using the parallel plate technique. The overall cure process is characterized by differential scanning calorimetry. The sensitivity of the procedures is evaluated by studying the effects of ambient out time on the chemical end behaviorial properties of the resin.

  20. Annual Quality Assurance Conference Files by Nicola Watson and Rui Li

    EPA Pesticide Factsheets

    26th Annual Quality Assurance Conference. Abstract: An Innovative Water Management Device for Online and Canister-based Thermal Desorption of Trace-level VVOCs in High Humidity Ambient Air by Nicola Watson and Rui Li

  1. Annual Quality Assurance Conference Presentations by Johnathan Beck

    EPA Pesticide Factsheets

    25th Annual Quality Assurance Conference Presentation: Disinfectants/Disinfection Byproducts –Rules and Requirements and Presentation: Long Term 2 Enhanced Surface Water Treatment Rule (LT2) Cryptosporidium Monitoring

  2. Quality Assurance Project Plan for Citizen Science Projects

    EPA Pesticide Factsheets

    The Quality Assurance Project Plan is necessary for every project that collects or uses environmental data. It documents the project planning process and serves as a blueprint for how your project will run.

  3. Master Pump Shutdown MPS Software Quality Assurance Plan (SQAP)

    SciTech Connect

    BEVINS, R.R.

    2000-09-20

    The MPSS Software Quality Assurance (SQAP) describes the tools and strategy used in the development of the MPSS software. The document also describes the methodology for controlling and managing changes to the software.

  4. Reform of Teacher Education and the Problem of Quality Assurance.

    ERIC Educational Resources Information Center

    Barr, Robert D.

    1987-01-01

    Educational reform developments focusing on academic issues are contrasted with those emphasizing teacher performance. The concept of quality assurance in teacher education is considered, as is using student achievement as an indicator of teacher effectiveness. (Author/MT)

  5. Annual Quality Assurance Conference Files by Tom Mancuso

    EPA Pesticide Factsheets

    25th Annual Quality Assurance Conference. Abstract: Learn about the NEW EPA Method 325b for Refinery Fence Line Monitoring and TO-17 Extended for Soil Gas by Tom Mancuso and Abstract: Success Using Alternate Carrier Gases for Volatile Methods

  6. 10 CFR 72.142 - Quality assurance organization.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... activities are performed, the organizational structure for executing the quality assurance program may take... the required authority and organizational freedom. Irrespective of the organizational structure, the... functions of structures, systems, and components which are important to safety. These activities...

  7. 10 CFR 72.142 - Quality assurance organization.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... activities are performed, the organizational structure for executing the quality assurance program may take... the required authority and organizational freedom. Irrespective of the organizational structure, the... functions of structures, systems, and components which are important to safety. These activities...

  8. Lake Champlain TMDL Modeling Quality Assurance Project Plan

    EPA Pesticide Factsheets

    This document presents the quality assurance project plan for providing support to US EPA Region 1 in revising the Lake Champlain Total Maximum Daily Load, under Contract Number EP-C-08-004, Task Order 80.

  9. Enhancements to commissioning techniques and quality assurance of brachytherapy treatment planning systems that use model-based dose calculation algorithms.

    PubMed

    Rivard, Mark J; Beaulieu, Luc; Mourtada, Firas

    2010-06-01

    The current standard for brachytherapy dose calculations is based on the AAPM TG-43 formalism. Simplifications used in the TG-43 formalism have been challenged by many publications over the past decade. With the continuous increase in computing power, approaches based on fundamental physics processes or physics models such as the linear-Boltzmann transport equation are now applicable in a clinical setting. Thus, model-based dose calculation algorithms (MBDCAs) have been introduced to address TG-43 limitations for brachytherapy. The MBDCA approach results in a paradigm shift, which will require a concerted effort to integrate them properly into the radiation therapy community. MBDCA will improve treatment planning relative to the implementation of the traditional TG-43 formalism by accounting for individualized, patient-specific radiation scatter conditions, and the radiological effect of material heterogeneities differing from water. A snapshot of the current status of MBDCA and AAPM Task Group reports related to the subject of QA recommendations for brachytherapy treatment planning is presented. Some simplified Monte Carlo simulation results are also presented to delineate the effects MBDCA are called to account for and facilitate the discussion on suggestions for (i) new QA standards to augment current societal recommendations, (ii) consideration of dose specification such as dose to medium in medium, collisional kerma to medium in medium, or collisional kerma to water in medium, and (iii) infrastructure needed to uniformly introduce these new algorithms. Suggestions in this Vision 20/20 article may serve as a basis for developing future standards to be recommended by professional societies such as the AAPM, ESTRO, and ABS toward providing consistent clinical implementation throughout the brachytherapy community and rigorous quality management of MBDCA-based treatment planning systems.

  10. Integration of Quality Assurance/Quality Control into Quantitative Analysis

    NASA Astrophysics Data System (ADS)

    Bell, Suzanne C.; Moore, Jeff

    1998-07-01

    Modern laboratories, be they in government or industry, operate under strict quality assurance and quality control (QA/QC) guidelines. Yet, these topics are rarely covered in undergraduate laboratories, or are presented as isolated experiments. This fosters the false idea that QA/QC is a separate subject when in actuality it is an integral part of analytical chemistry. It is possible to incorporate QA/QC into existing student laboratories by utilizing blanks, replicates, knowns and spiked samples. Proper use of QA/QC, coupled to an understanding of fundamental chemical principles and statistics strengthens traditional laboratory exercises. Concepts of accuracy and precision are transformed from abstractions into concrete data, and student skills in troubleshooting and problem solving are enhanced.

  11. [Quality assurance and quality improvement in medical practice. Part 3: Clinical audit in medical practice].

    PubMed

    Godény, Sándor

    2012-02-05

    The first two articles in the series were about the definition of quality in healthcare, the quality approach, the importance of quality assurance, the advantages of quality management systems and the basic concepts and necessity of evidence based medicine. In the third article the importance and basic steps of clinical audit are summarised. Clinical audit is an integral part of quality assurance and quality improvement in healthcare, that is the responsibility of any practitioner involved in medical practice. Clinical audit principally measures the clinical practice against clinical guidelines, protocols and other professional standards, and sometimes induces changes to ensure that all patients receive care according to principles of the best practice. The clinical audit can be defined also as a quality improvement process that seeks to identify areas for service improvement, develop and carry out plans and actions to improve medical activity and then by re-audit to ensure that these changes have an effect. Therefore, its aims are both to stimulate quality improvement interventions and to assess their impact in order to develop clinical effectiveness. At the end of the article key points of quality assurance and improvement in medical practice are summarised.

  12. The Columbia River Protection Supplemental Technologies Quality Assurance Project Plan

    SciTech Connect

    Fix, N. J.

    2008-03-12

    Pacific Northwest National Laboratory researchers are working on the Columbia River Protection Supplemental Technologies Project. This project is a U. S. Department of Energy, Office of Environmental Management-funded initiative designed to develop new methods, strategies, and technologies for characterizing, modeling, remediating, and monitoring soils and groundwater contaminated with metals, radionuclides, and chlorinated organics. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by the Technologies Project staff.

  13. Quality assurance as a managerial innovation: a research perspective.

    PubMed Central

    Kaluzny, A D

    1982-01-01

    Quality assurance is defined and concepts from innovation theory are applied to the study of quality assurance programs. Two distinct although not mutually exclusive perspectives on innovation are considered--the diffusion perspective, focusing on the innovation itself and its implementation, and the adoption perspective, highlighting factors characteristic of the adoption unit (i.e., the organization or individuals within it) that facilitate or impede the adoption process. Directions for future research are suggested. PMID:7118545

  14. Near-facility environmental monitoring quality assurance project plan

    SciTech Connect

    McKinney, S.M.

    1997-11-24

    This Quality Assurance Project Plan addresses the quality assurance requirements for the activities associated with the preoperational and near facility environmental monitoring performed by Waste Management Federal Services, Inc., Northwest Operations and supersedes WHC-EP-0538-2. This plan applies to all sampling and monitoring activities performed by waste management Federal Services, Inc., Northwest Operations in implementing facility environmental monitoring at the Hanford Site.

  15. Internal quality assurance in cervical cytology one laboratory's experience.

    PubMed

    Cross, P A

    1996-02-01

    The results of an internal quality assurance exercise in one cervical cytology laboratory in England are presented, using different types of partial percentage re-screening of cervical smears. An overall false negative dyskaryotic rate of up to 4.3% was demonstrated, with the final cytology report diagnosis differing from the primary screening dignosis in 1.3% of cases. These finding are discussed, with the aim of helping to foster debate on the setting of national laboratory internal quality assurance standards.

  16. Quality Assurance Project Plan for Facility Effluent Monitoring Plan activities

    SciTech Connect

    Frazier, T.P.

    1994-10-20

    This Quality Assurance Project Plan addresses the quality assurance requirements for the activities associated with the Facility Effluent Monitoring Plans, which are part of the overall Hanford Site Environmental Protection Plan. This plan specifically applies to the sampling and analysis activities and continuous monitoring performed for all Facility Effluent Monitoring Plan activities conducted by Westinghouse Hanford Company. It is generic in approach and will be implemented in conjunction with the specific requirements of the individual Facility Effluent Monitoring Plans.

  17. Modified aerospace reliability and quality assurance method for wind turbines

    NASA Technical Reports Server (NTRS)

    Klein, W. E.

    1980-01-01

    The safety, reliability, and quality assurance (SR&QA) approach developed for the first large wind turbine generator project is described. The SR&QA approach was used to assure that the machine would not be hazardous to the public or operating personnel, would operate unattended on a utility grid, would demonstrate reliable operation and would help establish the quality assurance and maintainability requirements for future wind turbine projects. A modified failure modes and effects analysis during the design phase, minimal hardware inspections during parts fabrication, and three simple documents to control activities during machine construction and operation were presented.

  18. Reliability and quality assurance on the MOD 2 wind system

    NASA Technical Reports Server (NTRS)

    Mason, W. E. B.; Jones, B. G.

    1981-01-01

    The Safety, Reliability, and Quality Assurance (R&QA) approach developed for the largest wind turbine generator, the Mod 2, is described. The R&QA approach assures that the machine is not hazardous to the public or to the operating personnel, is operated unattended on a utility grid, demonstrates reliable operation, and helps establish the quality assurance and maintainability requirements for future wind turbine projects. The significant guideline consisted of a failure modes and effects analysis (FMEA) during the design phase, hardware inspections during parts fabrication, and three simple documents to control activities during machine construction and operation.

  19. NIF Projects Controls and Information Systems Software Quality Assurance Plan

    SciTech Connect

    Fishler, B

    2011-03-18

    Quality achievement for the National Ignition Facility (NIF) and the National Ignition Campaign (NIC) is the responsibility of the NIF Projects line organization as described in the NIF and Photon Science Directorate Quality Assurance Plan (NIF QA Plan). This Software Quality Assurance Plan (SQAP) is subordinate to the NIF QA Plan and establishes quality assurance (QA) activities for the software subsystems within Controls and Information Systems (CIS). This SQAP implements an activity level software quality assurance plan for NIF Projects as required by the LLNL Institutional Software Quality Assurance Program (ISQAP). Planned QA activities help achieve, assess, and maintain appropriate quality of software developed and/or acquired for control systems, shot data systems, laser performance modeling systems, business applications, industrial control and safety systems, and information technology systems. The objective of this SQAP is to ensure that appropriate controls are developed and implemented for management planning, work execution, and quality assessment of the CIS organization's software activities. The CIS line organization places special QA emphasis on rigorous configuration control, change management, testing, and issue tracking to help achieve its quality goals.

  20. UMTRA Project Office Quality Assurance Program Plan. Revision 5

    SciTech Connect

    Not Available

    1993-11-01

    The Uranium Mill Tailings Remedial Action (UMTRA) Project was established to accomplish remedial actions at inactive uranium mill tailings sites in accordance with Public Law 95-604, the Uranium Mill Tailings Radiation Control Act of 1978 (UMTRCA). The UMTRA Project`s mission is to stabilize and control the residual radioactive materials at designated sites in a safe and environmentally sound manner so as to minimize or eliminate radiation health hazards to the public. The US Department of Energy (DOE) UMTRA Project Office directs the overall Project. Because these efforts may involve possible risks to public health and safety, a quality assurance (QA) program that conforms to the applicable criteria (set forth in the reference documents) has been established to control the quality of the work. This document, the Quality Assurance Program Plan (QAPP), brings into one document the essential criteria to be applied on a selective basis, depending upon the nature of the activity being conducted, and describes how those criteria shall be applied to the UMTRA Project. The UMTRA Project Office shall require each Project contractor to prepare and submit for approval a more detailed QAPP that is based on the applicable criteria of this QAPP and the referenced documents. All QAPPs on the UMTRA Project shall fit within the framework of this plan or an industry standard format that has been approved by the DOE Project Office.

  1. Quality assurance and technology assessment: pieces of a larger puzzle.

    PubMed

    McDonald, I G

    2000-01-01

    Increasing integration of health care and health services research has resulted in an overlap between disciplines involved in the evaluation of clinical practice. We have examined the relationships of quality assurance (QA), medical technology assessment (TA), clinical epidemiology (CE) and evidence-based medicine (EBM) from an historical perspective. Clinicians, patients and administrators need local information on effectiveness of routine care. Information from trials alone, efficacy data, will not suffice nor can it be culled from administrative databases designed for other purposes. The current activities of QA should be therefore be expanded to include the study of the effectiveness of interventions in terms of appropriateness of use, patient outcomes and study of the determinants of outcomes, as seen from the perspective of doctors, patients, administrators and policy makers, using data collected during the course of routine patient care. With the assistance of information technology, with methodological support and multidisciplinary cooperation, clinicians can do this as part of a more broadly defined clinical research. Quality assurance and TA both evolved with the objective of studying clinical care but have quite different historical roots, complementary perspectives and objectives, use different methods and involve a different set of practitioners. Quality assurance is a type of 'formative' evaluation conducted in the clinical setting using indicators as flags of process or outcome events of interest, simple surveys and audit studies. Its primary aim is to achieve incremental improvement rather than to simply pass judgement. An important underlying assumption is that health care behaves as a complex dynamic system. Technology assessment, a form of summative evaluation with an orientation towards policy, synthesises information from formal scientific studies of efficacy in the form of clinical trials and studies of cost-effectiveness. For the evaluation

  2. 30 CFR 14.8 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... order to assure that the finished conveyor belt will meet the flame-resistance test— (1) Flame test a sample of each batch, lot, or slab of conveyor belts; or (2) Flame test or inspect a sample of each batch or lot of the materials that contribute to the flame-resistance characteristic. (b)...

  3. SAPHIRE 8 Quality Assurance Software Metrics Report

    SciTech Connect

    Kurt G. Vedros

    2011-08-01

    The purpose of this review of software metrics is to examine the quality of the metrics gathered in the 2010 IV&V and to set an outline for results of updated metrics runs to be performed. We find from the review that the maintenance of accepted quality standards presented in the SAPHIRE 8 initial Independent Verification and Validation (IV&V) of April, 2010 is most easily achieved by continuing to utilize the tools used in that effort while adding a metric of bug tracking and resolution. Recommendations from the final IV&V were to continue periodic measurable metrics such as McCabe's complexity measure to ensure quality is maintained. The four software tools used to measure quality in the IV&V were CodeHealer, Coverage Validator, Memory Validator, Performance Validator, and Thread Validator. These are evaluated based on their capabilities. We attempted to run their latest revisions with the newer Delphi 2010 based SAPHIRE 8 code that has been developed and was successful with all of the Validator series of tools on small tests. Another recommendation from the IV&V was to incorporate a bug tracking and resolution metric. To improve our capability of producing this metric, we integrated our current web reporting system with the SpiraTest test management software purchased earlier this year to track requirements traceability.

  4. Quality Assurance on the Road: Finland and Austria in Comparison

    ERIC Educational Resources Information Center

    Bernhard, Andrea

    2011-01-01

    The ongoing necessity for quality and quality assurance in the entire Bologna process remains one of the main issues for European policy makers. The aims of creating comparable systems and of guaranteeing quality within higher education systems are the reasons for national developments and the eagerness to reform. The situation in two relatively…

  5. Quality Assurance in Psychology Programmes across Europe: Survey and Reflections

    ERIC Educational Resources Information Center

    Marques, J. Frederico

    2013-01-01

    The present article examines how different institutions that offer psychology study cycles across Europe have adopted quality principles and have taken up particular quality assurance initiatives to raise standards and enhance quality. Thirty-eight different institutions from 32 countries who were members of a European psychology network responded…

  6. Strategic Planning and Quality Assurance in the Bologna Process

    ERIC Educational Resources Information Center

    Kettunen, Juha; Kantola, Mauri

    2007-01-01

    Strategic planning and quality management have been developed independently of each other, but they meet in practice in many kinds of organisations. Strategic planning and quality assurance integrate different aspects of higher education institutions (HEIs) to ensure high-quality educational outcomes. This paper investigates the role of these two…

  7. 10 CFR 71.105 - Quality assurance program.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance program. 71.105 Section 71.105 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE MATERIAL Quality... which functional compliance can be demonstrated by inspection or test; and (5) The quality history...

  8. 10 CFR 71.105 - Quality assurance program.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Quality assurance program. 71.105 Section 71.105 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE MATERIAL Quality... which functional compliance can be demonstrated by inspection or test; and (5) The quality history...

  9. 10 CFR 71.105 - Quality assurance program.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance program. 71.105 Section 71.105 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE MATERIAL Quality... which functional compliance can be demonstrated by inspection or test; and (5) The quality history...

  10. 10 CFR 71.105 - Quality assurance program.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance program. 71.105 Section 71.105 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE MATERIAL Quality... which functional compliance can be demonstrated by inspection or test; and (5) The quality history...

  11. 10 CFR 71.105 - Quality assurance program.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Quality assurance program. 71.105 Section 71.105 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE MATERIAL Quality... which functional compliance can be demonstrated by inspection or test; and (5) The quality history...

  12. Student Involvement in the Egyptian Quality Assurance System

    ERIC Educational Resources Information Center

    Elassy, Noha

    2015-01-01

    Purpose: The purpose of this paper is to study the extent and the quality of student involvement in the quality assurance process (QAP) in Egyptian higher education institutions (HEIs). Design/methodology/approach: In this study, two qualitative methods were used to explore the extent and the quality of student involvement; these were focus groups…

  13. 10 CFR 63.142 - Quality assurance criteria.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... specifications, met by the purchased material and equipment. (3) The effectiveness of the control of quality by... functions of these organizations. The quality assurance program must control activities affecting the... controls, processes, test equipment, tools, and skills to attain the required quality, and the need...

  14. Quality assurance in health sciences literature searching: applying the ISO 9000 quality standard.

    PubMed

    Cullen, R; Mason, D

    1995-09-01

    Medicine is a literature-based discipline. Ensuring that the literature review which precedes a significant piece of medical research has met predetermined standards is essential. A list of items reviewed carries no guarantees that all appropriate items have been included in the survey of the literature, or that appropriate sources have been efficiently searched. This would be a matter for concern in any discipline. In medicine it is a matter of life and death. Quality assurance procedures that offer guarantees of the standards built into the process, rather than quality control which measures only outputs, can provide the necessary reassurance. The ISO 9000 quality standard offers a much needed quality assurance process. A methodology for applying the ISO 9000 standard to the task of searching the medical literature is outlined in this paper. A new role for medical librarians in promoting a rigorous methodology in the literature review equal to that of the research it supports is defined.

  15. Quality assurance and accreditation of engineering education in Jordan

    NASA Astrophysics Data System (ADS)

    Aqlan, Faisal; Al-Araidah, Omar; Al-Hawari, Tarek

    2010-06-01

    This paper provides a study of the quality assurance and accreditation in the Jordanian higher education sector and focuses mainly on engineering education. It presents engineering education, accreditation and quality assurance in Jordan and considers the Jordan University of Science and Technology (JUST) for a case study. The study highlights the efforts undertaken by the faculty of engineering at JUST concerning quality assurance and accreditation. Three engineering departments were accorded substantial equivalency status by the Accreditation Board of Engineering and Technology in 2009. Various measures of quality improvement, including curricula development, laboratories improvement, computer facilities, e-learning, and other supporting services are also discussed. Further assessment of the current situation is made through two surveys, targeting engineering instructors and students. Finally, the paper draws conclusions and proposes recommendations to enhance the quality of engineering education at JUST and other Jordanian educational institutions.

  16. 40 CFR 75.21 - Quality assurance and quality control requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 17 2012-07-01 2012-07-01 false Quality assurance and quality control... PROGRAMS (CONTINUED) CONTINUOUS EMISSION MONITORING Operation and Maintenance Requirements § 75.21 Quality assurance and quality control requirements. (a) Continuous emission monitoring systems. The owner...

  17. Quality assurance of volumetric modulated arc therapy using Elekta Synergy.

    PubMed

    Haga, Akihiro; Nakagawa, Keiichi; Shiraishi, Kenshiro; Itoh, Saori; Terahara, Atsuro; Yamashita, Hideomi; Ohtomo, Kuni; Saegusa, Shigeki; Imae, Toshikazu; Yoda, Kiyoshi; Pellegrini, Roberto

    2009-01-01

    PURPOSE. Recently, Elekta has supplied volumetric modulated arc therapy (VMAT) in which multi-leaf collimator (MLC) shape, jaw position, collimator angle, and gantry speed vary continuously during gantry rotation. A quality assurance procedure for VMAT delivery is described. METHODS AND MATERIALS. A single-arc VMAT plan with 73 control points (CPs) and 5-degree gantry angle spacing for a prostate cancer patient has been created by ERGO + + treatment planning system (TPS), where MLC shapes are given by anatomic relationship between a target and organs at risk and the monitor unit for each CP is optimized based on given dose prescriptions. Actual leaf and jaw positions, gantry angles and dose rates during prostate VMAT delivery were recorded in every 0.25 seconds, and the errors between planned and actual values were evaluated. The dose re-calculation using these recorded data has been performed and compared with the original TPS plan using the gamma index. RESULTS. Typical peak errors of gantry angles, leaf positions, and jaw positions were 3 degrees, 0.6 mm, and 1 mm, respectively. The dose distribution obtained by the TPS plan and the recalculated one agreed well under 2%-2 mm gamma index criteria. CONCLUSIONS. Quality assurance for prostate VMAT delivery has been performed with a satisfied result.

  18. Quality assurance, information tracking, and consumer labeling.

    PubMed

    Caswell, Julie A

    2006-01-01

    Reducing marine-based public health risk requires strict control of several attributes of seafood products, often including location and conditions of catch or aquaculture, processing, and handling throughout the supply chain. Buyers likely will also be interested in other attributes of these products such as eco-friendliness or taste. Development of markets for improved safety, as well as for other quality attributes, requires an effective certification and tracking of these attributes as well as their communication to buyers. Several challenges must be met if labeling, particularly consumer labeling, is to support the development of markets for improved seafood safety.

  19. Use of a line-pair resolution phantom for comprehensive quality assurance of electronic portal imaging devices based on fundamental imaging metrics

    SciTech Connect

    Gopal, Arun; Samant, Sanjiv S.

    2009-06-15

    Image guided radiation therapy solutions based on megavoltage computed tomography (MVCT) involve the extension of electronic portal imaging devices (EPIDs) from their traditional role of weekly localization imaging and planar dose mapping to volumetric imaging for 3D setup and dose verification. To sustain the potential advantages of MVCT, EPIDs are required to provide improved levels of portal image quality. Therefore, it is vital that the performance of EPIDs in clinical use is maintained at an optimal level through regular and rigorous quality assurance (QA). Traditionally, portal imaging QA has been carried out by imaging calibrated line-pair and contrast resolution phantoms and obtaining arbitrarily defined QA indices that are usually dependent on imaging conditions and merely indicate relative trends in imaging performance. They are not adequately sensitive to all aspects of image quality unlike fundamental imaging metrics such as the modulation transfer function (MTF), noise power spectrum (NPS), and detective quantum efficiency (DQE) that are widely used to characterize detector performance in radiographic imaging and would be ideal for QA purposes. However, due to the difficulty of performing conventional MTF measurements, they have not been used for routine clinical QA. The authors present a simple and quick QA methodology based on obtaining the MTF, NPS, and DQE of a megavoltage imager by imaging standard open fields and a bar-pattern QA phantom containing 2 mm thick tungsten line-pair bar resolution targets. Our bar-pattern based MTF measurement features a novel zero-frequency normalization scheme that eliminates normalization errors typically associated with traditional bar-pattern measurements at megavoltage x-ray energies. The bar-pattern QA phantom and open-field images are used in conjunction with an automated image analysis algorithm that quickly computes the MTF, NPS, and DQE of an EPID system. Our approach combines the fundamental advantages of

  20. Quality Assurance System for Earth Science Data and Information

    NASA Astrophysics Data System (ADS)

    Koziana, J. V.; Olson, J.; Lu, W.; Anselmo, T. M.; Ramsayer, D. B.

    2008-12-01

    The US Integrated Ocean Observing System (IOOS) vision for the observing systems will bring a wide variety of real-time data from a distributed sensor network. Data quality assurance is the foundation that allows the earth science data and information to be used to create environmental data records and climate data records. We have developed a scalar, modular automated data quality assurance system that can be used by a single data provider or a large data center to characterize the relative quality of various data sets for various collections and platforms and standards. Furthermore, the system is easily configurable to work with different observations and model outputs and only requires minimal code changes to accommodate the addition of quality assurance algorithms and data products. A major component of the system is an Algorithm Library that was implemented using a modular architecture that encapsulates algorithms into decoupled, re-useable modules while providing the mechanism for assembling them into a working system. We are continuing to build and enhance the library from simple rate and limit checks to more sophisticated quality assurance methods for same senor inter-comparisons to comparisons with models. This paper will present an overview of the architecture of the quality assurance system and the application of the Algorithm Library.

  1. Quality Assurance Protocol for AFCI Advanced Structural Materials Testing

    SciTech Connect

    Busby, Jeremy T

    2009-05-01

    The objective of this letter is to inform you of recent progress on the development of advanced structural materials in support of advanced fast reactors and AFCI. As you know, the alloy development effort has been initiated in recent months with the procurement of adequate quantities of the NF616 and HT-UPS alloys. As the test alloys become available in the coming days, mechanical testing, evaluation of optimizing treatments, and screening of environmental effects will be possible at a larger scale. It is therefore important to establish proper quality assurance protocols for this testing effort in a timely manner to ensure high technical quality throughout testing. A properly implemented quality assurance effort will also enable preliminary data taken in this effort to be qualified as NQA-1 during any subsequent licensing discussions for an advanced design or actual prototype. The objective of this report is to describe the quality assurance protocols that will be used for this effort. An essential first step in evaluating quality protocols is assessing the end use of the data. Currently, the advanced structural materials effort is part of a long-range, basic research and development effort and not, as yet, involved in licensing discussions for a specific reactor design. After consultation with Mark Vance (an ORNL QA expert) and based on the recently-issued AFCI QA requirements, the application of NQA-1 quality requirements will follow the guidance provided in Part IV, Subpart 4.2 of the NQA-1 standard (Guidance on Graded Application of QA for Nuclear-Related Research and Development). This guidance mandates the application of sound scientific methodology and a robust peer review process in all phases, allowing for the data to be qualified for use even if the programmatic mission changes to include licensing discussions of a specific design or prototype. ORNL has previously implemented a QA program dedicated to GNEP activities and based on an appropriately graded

  2. 48 CFR 246.402 - Government contract quality assurance at source.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... quality assurance at source. 246.402 Section 246.402 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.402 Government contract quality assurance at source. Do not...

  3. 2011 SAPHIRE 8 Software Quality Assurance Status Report

    SciTech Connect

    Kurt G. Vedros

    2011-09-01

    The Software Quality Assurance engineer position was created in fiscal year 2011 to better maintain and improve the quality of the SAPHIRE 8 development program. This year's Software Quality Assurance tasks concentrated on developing the framework of the SQA program. This report reviews the accomplishments and recommendations for each of the subtasks set forth for JCN V6059: (1) Reviews, Tests, and Code Walkthroughs; (2) Data Dictionary; (3) Metrics; (4) Requirements Traceability Matrix; (5) Provide Oversight on SAPHIRE QA Activities; and (6) Support NRC Presentations and Meetings.

  4. [Quality assurance in head and neck medical oncology].

    PubMed

    Digue, Laurence; Pedeboscq, Stéphane

    2014-05-01

    In medical oncology, how can we be sure that the right drug is being administered to the right patient at the right time? The implementation of quality assurance criteria is important in medical oncology, in order to ensure that the patient receives the best treatment safely. There is very little literature about quality assurance in medical oncology, as opposed to radiotherapy or cancer surgery. Quality assurance must cover the entire patient care process, from the diagnosis, to the therapeutic decision and drug distribution, including its selection, its preparation and its delivery to the patient (administration and dosage), and finally the potential side effects and their management. The dose-intensity respect is crucial, and its reduction can negatively affect overall survival rates, as shown in breast and testis cancers for example. In head and neck medical oncology, it is essential to respect the few well-standardized recommendations and the dose-intensity, in a population with numerous comorbidities. We will first review quality assurance criteria for the general medical oncology organization and then focus on head and neck medical oncology. We will then describe administration specificities of head and neck treatments (chemoradiation, radiation plus cetuximab, postoperative chemoradiation, induction and palliative chemotherapy) as well as their follow-up. Lastly, we will offer some recommendations to improve quality assurance in head and neck medical oncology.

  5. 46 CFR 162.060-36 - Quality Assurance Project Plan (QAPP) requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL ENGINEERING EQUIPMENT Ballast Water Management Systems... process must contain a rigorous Quality Assurance and Quality Control program consisting of a QAPP... evaluations is responsible for ensuring the appropriate Quality Assurance and Quality Control procedures...

  6. 46 CFR 162.060-36 - Quality Assurance Project Plan (QAPP) requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL ENGINEERING EQUIPMENT Ballast Water Management Systems... process must contain a rigorous Quality Assurance and Quality Control program consisting of a QAPP... evaluations is responsible for ensuring the appropriate Quality Assurance and Quality Control procedures...

  7. 46 CFR 162.060-36 - Quality Assurance Project Plan (QAPP) requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL ENGINEERING EQUIPMENT Ballast Water Management Systems... process must contain a rigorous Quality Assurance and Quality Control program consisting of a QAPP... evaluations is responsible for ensuring the appropriate Quality Assurance and Quality Control procedures...

  8. 48 CFR 2152.246-70 - Quality assurance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Quality assurance... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CLAUSES AND FORMS PRECONTRACT PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 2152.246-70 Quality...

  9. Quality Assurance in Dietetic Services Workshop for the Dietetic Assistant.

    ERIC Educational Resources Information Center

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This workshop guide is a unit of study for teaching dietetic assistants to work with quality control in a nursing home or hospital. The objective of the unit is to enable the students to develop and expand a dietetic services administrative and clinical quality assurance program in his or her own institution. Following the unit objective, the unit…

  10. Quality Assurance Systems, TQM, and the New Collegialism.

    ERIC Educational Resources Information Center

    Harvey, Lee

    This report discusses the application of the International Organization for Standards's ISO9000 quality assurance standard and Total Quality Management (TQM) to higher education in light of the "new collegialism." It defines the basic elements of ISO9000 and TQM, reviews the strengths and weaknesses of both approaches, and notes efforts…

  11. 42 CFR 441.474 - Quality assurance and improvement plan.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... SERVICES Optional Self-Directed Personal Assistance Services Program § 441.474 Quality assurance and... use to monitor and evaluate the self-directed State plan option. Quality of care measures must be made... order to learn of critical incidents or events that affect participants, correct shortcomings,...

  12. Assuring Quality in Large-Scale Online Course Development

    ERIC Educational Resources Information Center

    Parscal, Tina; Riemer, Deborah

    2010-01-01

    Student demand for online education requires colleges and universities to rapidly expand the number of courses and programs offered online while maintaining high quality. This paper outlines two universities respective processes to assure quality in large-scale online programs that integrate instructional design, eBook custom publishing, Quality…

  13. Quality assurance of weather data for agricultural system model input

    Technology Transfer Automated Retrieval System (TEKTRAN)

    It is well known that crop production and hydrologic variation on watersheds is weather related. Rarely, however, is meteorological data quality checks reported for agricultural systems model research. We present quality assurance procedures for agricultural system model weather data input. Problems...

  14. 23 CFR 637.207 - Quality assurance program.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... independent assurance (IA) program consisting of the following: (1) Acceptance program. (i) Each STD's... quality control samples. (C) The quality control sampling and testing is evaluated by an IA program. (iii... appropriate. See 23 CFR 635.413(e) for specific requirements. (2) The IA program shall evaluate the...

  15. Quality Assurance Model for Digital Adult Education Materials

    ERIC Educational Resources Information Center

    Dimou, Helen; Kameas, Achilles

    2016-01-01

    Purpose: This paper aims to present a model for the quality assurance of digital educational material that is appropriate for adult education. The proposed model adopts the software quality standard ISO/IEC 9126 and takes into account adult learning theories, Bloom's taxonomy of learning objectives and two instructional design models: Kolb's model…

  16. Quality Assurance and Transparency Tools. ENQA Workshop Report 15

    ERIC Educational Resources Information Center

    Costes, Nathalie; Hopbach, Achim; Kekalainen, Helka; van IJperen, Robin; Walsh, Padraig

    2010-01-01

    The European Association for Quality Assurance in Higher Education (ENQA) realises that there is a steadily growing interest among students and all stakeholders of Higher Education and the public at large in accessing detailed and reliable information on the quality of individual study programmes, faculties and higher education institutions. ENQA…

  17. Quality Assurance in Australian Higher Education: Historical and Future Development

    ERIC Educational Resources Information Center

    Shah, Mahsood; Nair, Sid; Wilson, Mark

    2011-01-01

    Higher education policies related to quality assurance are implemented in many countries. The purposes of such policies are to ensure the provision for high-quality education, university accountability and transparency in the use of public funding and meeting the needs of the diverse stakeholders. The current Australian Higher Education Quality…

  18. 48 CFR 2152.246-70 - Quality assurance requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Quality assurance... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CLAUSES AND FORMS PRECONTRACT PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 2152.246-70 Quality...

  19. 21 CFR 892.1940 - Radiologic quality assurance instrument.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Radiologic quality assurance instrument. 892.1940 Section 892.1940 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Diagnostic Devices § 892.1940 Radiologic quality...

  20. 21 CFR 892.1940 - Radiologic quality assurance instrument.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Radiologic quality assurance instrument. 892.1940 Section 892.1940 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Diagnostic Devices § 892.1940 Radiologic quality...

  1. 21 CFR 892.1940 - Radiologic quality assurance instrument.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Radiologic quality assurance instrument. 892.1940 Section 892.1940 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Diagnostic Devices § 892.1940 Radiologic quality...

  2. 21 CFR 892.1940 - Radiologic quality assurance instrument.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Radiologic quality assurance instrument. 892.1940 Section 892.1940 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Diagnostic Devices § 892.1940 Radiologic quality...

  3. 21 CFR 892.1940 - Radiologic quality assurance instrument.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Radiologic quality assurance instrument. 892.1940 Section 892.1940 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Diagnostic Devices § 892.1940 Radiologic quality...

  4. Developing Quality Assurance Culture for Sustainable University Education in Nigeria

    ERIC Educational Resources Information Center

    Ibara, Emmanuel Chisa

    2015-01-01

    The relevance of any university education depends on quality parameters that should be specified, adhered to and sustained. The development of quality assurance culture in Nigerian university education is imperative, considering the fact that globalization, mobility of labour, competition and the quest for best practices have subjected…

  5. 40 CFR 75.45 - Daily quality assurance criteria.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Daily quality assurance criteria. 75.45 Section 75.45 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTINUOUS EMISSION MONITORING Alternative Monitoring Systems § 75.45 Daily quality...

  6. Quality Assurance Roadmap for High Performance Residential Buildings

    SciTech Connect

    2008-10-05

    This report outlines the approach to quality assurance in the construction process for new residential construction, including seven process steps from the assessment of current construction practice, through design and documentation changes, to training and quality control for on-site personnel.

  7. Challenges of Globalization and Quality Assurance in Nigerian University Education

    ERIC Educational Resources Information Center

    Nkang, Iniobong Ekong

    2013-01-01

    The study was undertaken to examine the state of quality assurance mechanisms in Nigerian universities with a view to proffering measures that would enhance the quality of education obtained in the institutions. The population consisted of professors from federal universities in the south-south region of Nigeria, numbering 624. The stratified…

  8. Academic Quality Assurance Variables in Nigerian Universities: Exploring Lecturers' Perception

    ERIC Educational Resources Information Center

    Obiekezie, Eucharia O.; Ejemot-Nwadiaro, Regina I.; Timothy, Alexander E.; Essien, Margaret I.

    2016-01-01

    The level of job performance, international comparability and competitiveness of Nigerian university graduates are burning issues. Consequently, the academic quality of Nigerian universities has come under severe criticism. Since university lecturers are key players in quality assurance in universities, this study explored their perceptions of…

  9. 49 CFR 179.7 - Quality assurance program.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... between managers, engineers, purchasing, construction, inspection, testing, and quality control personnel... that the fabrication and construction materials received are properly identified and documented. (5) A... 49 Transportation 3 2013-10-01 2013-10-01 false Quality assurance program. 179.7 Section...

  10. 16 CFR 1633.6 - Quality assurance requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... material or construction/assembly process used could negatively affect the test performance of the mattress... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Quality assurance requirements. 1633.6... STANDARD FOR THE FLAMMABILITY (OPEN FLAME) OF MATTRESS SETS The Standard § 1633.6 Quality...

  11. 49 CFR 179.7 - Quality assurance program.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... quality control personnel. (3) Procedures to ensure that the latest applicable drawings, design...) Procedures to ensure that the fabrication and construction materials received are properly identified and... 49 Transportation 2 2010-10-01 2010-10-01 false Quality assurance program. 179.7 Section...

  12. 16 CFR 1633.6 - Quality assurance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... material or construction/assembly process used could negatively affect the test performance of the mattress... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Quality assurance requirements. 1633.6... STANDARD FOR THE FLAMMABILITY (OPEN FLAME) OF MATTRESS SETS The Standard § 1633.6 Quality...

  13. Software quality assurance (SQA) for Savannah River reactors

    SciTech Connect

    Schaumann, C.M.

    1990-01-01

    Over the last 25 years, the Savannah River Site (SRS) has developed a strong Software Quality Assurance (SQA) program. It provides the information and management controls required of a high quality auditable system. The SRS SQA program provides the framework to meet the requirements in increasing regulation.

  14. Nuclear Technology Series. Course 31: Quality-Assurance Practices.

    ERIC Educational Resources Information Center

    Center for Occupational Research and Development, Inc., Waco, TX.

    This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

  15. The Quality Assurance Manual and EPA`s acid rain data quality

    SciTech Connect

    Bloomer, B.J.; Winkler, J.P.

    1995-12-31

    November 15, 1990 saw the passage of the Clean Air Act Amendments of 1990. Within this law was the requirements for all electric utility units greater than 25 megawatts of generated electrical capacity to monitor SO{sub 2}, NO{sub x}, CO{sub 2}, opacity, and volumetric flow of the stack gases. This paper summarizes the Acid Rain Program`s approach to Continuous Emissions Monitoring Systems (CEMS) Quality Control and Quality Assurance requirements and their use in the market based pollution control program of Title IV of the Clean Air Act Amendments of 1990. This paper attempts to present the perspective of the authors as to what is important for excellent monitoring system availability and ensuring accurate data acquisition. Emphasis is placed upon the Quality Assurance Manual required by the Acid Rain Regulations for affected unit`s to maintain and follow.

  16. Quality of Dementia Care in the Community: Identifying Key Quality Assurance Components

    PubMed Central

    Heckman, George A.; Boscart, Veronique M.; Franco, Bryan B.; Hillier, Loretta; Crutchlow, Lauren; Lee, Linda; Molnar, Frank; Seitz, Dallas; Stolee, Paul

    2016-01-01

    Background Primary care-based memory clinics (PCMCs) have been established in several jurisdictions to improve the care for persons with Alzheimer’s disease and related dementias. We sought to identify key quality indicators (QIs), quality improvement mechanisms, and potential barriers and facilitators to the establishment of a quality assurance framework for PCMCs. Methods We employed a Delphi approach to obtain consensus from PCMC clinicians and specialist physicians on QIs and quality improvement mechanisms. Thirty-eight candidate QIs and 19 potential quality improvement mechanisms were presented to participants in two rounds of electronic Delphi surveys. Written comments were collected and descriptively analyzed. Results The response rate for the first and second rounds were 21.3% (n = 179) and 12.8% (n = 88), respectively. The majority of respondents were physicians. Fourteen QIs remained after the consensus process. Ten quality improvement mechanisms were selected with those characterized by specialist integration, such as case discussions and mentorships, being ranked highly. Written comments revealed three major themes related to potential barriers and facilitators to quality assurance: 1) perceived importance, 2) collaboration and role clarity, and 3) implementation process. Conclusion We successfully utilized a consultative process among primary and specialty providers to identify core QIs and quality improvement mechanisms for PCMCs. Identified quality improvement mechanisms highlight desire for multi-modal education. System integration and closer integration between PCMCs and specialists were emphasized as essential for the provision of high-quality dementia care in community settings. PMID:28050221

  17. Assuring fish safety and quality in international fish trade.

    PubMed

    Ababouch, Lahsen

    2006-01-01

    International trade in fishery commodities reached US 58.2 billion dollars in 2002, a 5% improvement relative to 2000 and a 45% increase over 1992 levels. Within this global trade, developing countries registered a net trade surplus of US 17.4 billion dollars in 2002 and accounted for almost 50% by value and 55% of fish exports by volume. This globalization of fish trade, coupled with technological developments in food production, handling, processing and distribution, and the increasing awareness and demand of consumers for safe and high quality food have put food safety and quality assurance high in public awareness and a priority for many governments. Consequently, many countries have tightened food safety controls, imposing additional costs and requirements on imports. As early as 1980, there was an international drive towards adopting preventative HACCP-based safety and quality systems. More recently, there has been a growing awareness of the importance of an integrated, multidisciplinary approach to food safety and quality throughout the entire food chain. Implementation of this approach requires an enabling policy and regulatory environment at national and international levels with clearly defined rules and standards, establishment of appropriate food control systems and programmes at national and local levels, and provision of appropriate training and capacity building. This paper discusses the international framework for fish safety and quality, with particular emphasis on the United Nation's Food and Agricultural Organization's (FAO) strategy to promote international harmonization and capacity building.

  18. Trading Quality across Borders: Colonial Discourse and International Quality Assurance Policies in Higher Education

    ERIC Educational Resources Information Center

    Blanco Ramírez, Gerardo

    2014-01-01

    Accountability and quality assurance have become central discourses in higher education policy throughout the world. However, accountability and quality assurance involve power and control. Practices and ideas about quality developed in the Global North are spreading rapidly across the Global South, leading to increased uniformity in the…

  19. Report of AAPM TG 135: quality assurance for robotic radiosurgery.

    PubMed

    Dieterich, Sonja; Cavedon, Carlo; Chuang, Cynthia F; Cohen, Alan B; Garrett, Jeffrey A; Lee, Charles L; Lowenstein, Jessica R; d'Souza, Maximian F; Taylor, David D; Wu, Xiaodong; Yu, Cheng

    2011-06-01

    The task group (TG) for quality assurance for robotic radiosurgery was formed by the American Association of Physicists in Medicine's Science Council under the direction of the Radiation Therapy Committee and the Quality Assurance (QA) Subcommittee. The task group (TG-135) had three main charges: (1) To make recommendations on a code of practice for Robotic Radiosurgery QA; (2) To make recommendations on quality assurance and dosimetric verification techniques, especially in regard to real-time respiratory motion tracking software; (3) To make recommendations on issues which require further research and development. This report provides a general functional overview of the only clinically implemented robotic radiosurgery device, the CyberKnife. This report includes sections on device components and their individual component QA recommendations, followed by a section on the QA requirements for integrated systems. Examples of checklists for daily, monthly, annual, and upgrade QA are given as guidance for medical physicists. Areas in which QA procedures are still under development are discussed.

  20. The NOνA Module Factory Quality Assurance System

    NASA Astrophysics Data System (ADS)

    Smith, Alex; the NOνA Collaboration

    The NOνA experiment will measure neutrino oscillations using a long-baseline beam, a ∼220-ton near detector and a ∼14-kiloton far detector. Production of ∼12500 modules to build these detectors is an industrial scale operation requiring careful quality assurance to meet the stringent technical specifications. Unlike a typical industrial operation, this project will use primarily a part time labor force of ∼200 University of Minnesota undergraduate students managed by a small team of full time employees. The quality assurance system is involved in nearly every aspect of the production: assembly, scheduling, training, payroll, materials, machine maintenance, test data, and safety compliance. The quality assurance data collected during the assembly process allows us to quickly identify and correct any problems that arise.