10 CFR 71.125 - Control of measuring and test equipment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... MATERIAL Quality Assurance § 71.125 Control of measuring and test equipment. The licensee, certificate holder, and applicant for a CoC shall establish measures to assure that tools, gauges, instruments, and other measuring and testing devices used in activities affecting quality are properly controlled...

76 FR 54800 - International Business Machines (IBM), Software Group Business Unit, Quality Assurance Group, San...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-02

... Machines (IBM), Software Group Business Unit, Quality Assurance Group, San Jose, California; Notice of... workers of International Business Machines (IBM), Software Group Business Unit, Optim Data Studio Tools QA... February 2, 2011 (76 FR 5832). The subject worker group supplies acceptance testing services, design...

User’s manual for the Automated Data Assurance and Management application developed for quality control of Everglades Depth Estimation Network water-level data

USGS Publications Warehouse

Petkewich, Matthew D.; Daamen, Ruby C.; Roehl, Edwin A.; Conrads, Paul

2016-09-29

The generation of Everglades Depth Estimation Network (EDEN) daily water-level and water-depth maps is dependent on high quality real-time data from over 240 water-level stations. To increase the accuracy of the daily water-surface maps, the Automated Data Assurance and Management (ADAM) tool was created by the U.S. Geological Survey as part of Greater Everglades Priority Ecosystems Science. The ADAM tool is used to provide accurate quality-assurance review of the real-time data from the EDEN network and allows estimation or replacement of missing or erroneous data. This user’s manual describes how to install and operate the ADAM software. File structure and operation of the ADAM software is explained using examples.

Note: Application of CR-39 plastic nuclear track detectors for quality assurance of mixed oxide fuel pellets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kodaira, S., E-mail: koda@nirs.go.jp; Kurano, M.; Hosogane, T.

A CR-39 plastic nuclear track detector was used for quality assurance of mixed oxide fuel pellets for next-generation nuclear power plants. Plutonium (Pu) spot sizes and concentrations in the pellets are significant parameters for safe use in the plants. We developed an automatic Pu detection system based on dense α-radiation tracks in the CR-39 detectors. This system would greatly improve image processing time and measurement accuracy, and will be a powerful tool for rapid pellet quality assurance screening.

Technical Note: Independent component analysis for quality assurance in functional MRI.

PubMed

Astrakas, Loukas G; Kallistis, Nikolaos S; Kalef-Ezra, John A

2016-02-01

Independent component analysis (ICA) is an established method of analyzing human functional MRI (fMRI) data. Here, an ICA-based fMRI quality control (QC) tool was developed and used. ICA-based fMRI QC tool to be used with a commercial phantom was developed. In an attempt to assess the performance of the tool relative to preexisting alternative tools, it was used seven weeks before and eight weeks after repair of a faulty gradient amplifier of a non-state-of-the-art MRI unit. More specifically, its performance was compared with the AAPM 100 acceptance testing and quality assurance protocol and two fMRI QC protocols, proposed by Freidman et al. ["Report on a multicenter fMRI quality assurance protocol," J. Magn. Reson. Imaging 23, 827-839 (2006)] and Stocker et al. ["Automated quality assurance routines for fMRI data applied to a multicenter study," Hum. Brain Mapp. 25, 237-246 (2005)], respectively. The easily developed and applied ICA-based QC protocol provided fMRI QC indices and maps equally sensitive to fMRI instabilities with the indices and maps of other established protocols. The ICA fMRI QC indices were highly correlated with indices of other fMRI QC protocols and in some cases theoretically related to them. Three or four independent components with slow varying time series are detected under normal conditions. ICA applied on phantom measurements is an easy and efficient tool for fMRI QC. Additionally, it can protect against misinterpretations of artifact components as human brain activations. Evaluating fMRI QC indices in the central region of a phantom is not always the optimal choice.

Requirement Metrics for Risk Identification

NASA Technical Reports Server (NTRS)

Hammer, Theodore; Huffman, Lenore; Wilson, William; Rosenberg, Linda; Hyatt, Lawrence

1996-01-01

The Software Assurance Technology Center (SATC) is part of the Office of Mission Assurance of the Goddard Space Flight Center (GSFC). The SATC's mission is to assist National Aeronautics and Space Administration (NASA) projects to improve the quality of software which they acquire or develop. The SATC's efforts are currently focused on the development and use of metric methodologies and tools that identify and assess risks associated with software performance and scheduled delivery. This starts at the requirements phase, where the SATC, in conjunction with software projects at GSFC and other NASA centers is working to identify tools and metric methodologies to assist project managers in identifying and mitigating risks. This paper discusses requirement metrics currently being used at NASA in a collaborative effort between the SATC and the Quality Assurance Office at GSFC to utilize the information available through the application of requirements management tools.

A unified software framework for deriving, visualizing, and exploring abstraction networks for ontologies

PubMed Central

Ochs, Christopher; Geller, James; Perl, Yehoshua; Musen, Mark A.

2016-01-01

Software tools play a critical role in the development and maintenance of biomedical ontologies. One important task that is difficult without software tools is ontology quality assurance. In previous work, we have introduced different kinds of abstraction networks to provide a theoretical foundation for ontology quality assurance tools. Abstraction networks summarize the structure and content of ontologies. One kind of abstraction network that we have used repeatedly to support ontology quality assurance is the partial-area taxonomy. It summarizes structurally and semantically similar concepts within an ontology. However, the use of partial-area taxonomies was ad hoc and not generalizable. In this paper, we describe the Ontology Abstraction Framework (OAF), a unified framework and software system for deriving, visualizing, and exploring partial-area taxonomy abstraction networks. The OAF includes support for various ontology representations (e.g., OWL and SNOMED CT's relational format). A Protégé plugin for deriving “live partial-area taxonomies” is demonstrated. PMID:27345947

A unified software framework for deriving, visualizing, and exploring abstraction networks for ontologies.

PubMed

Ochs, Christopher; Geller, James; Perl, Yehoshua; Musen, Mark A

2016-08-01

Software tools play a critical role in the development and maintenance of biomedical ontologies. One important task that is difficult without software tools is ontology quality assurance. In previous work, we have introduced different kinds of abstraction networks to provide a theoretical foundation for ontology quality assurance tools. Abstraction networks summarize the structure and content of ontologies. One kind of abstraction network that we have used repeatedly to support ontology quality assurance is the partial-area taxonomy. It summarizes structurally and semantically similar concepts within an ontology. However, the use of partial-area taxonomies was ad hoc and not generalizable. In this paper, we describe the Ontology Abstraction Framework (OAF), a unified framework and software system for deriving, visualizing, and exploring partial-area taxonomy abstraction networks. The OAF includes support for various ontology representations (e.g., OWL and SNOMED CT's relational format). A Protégé plugin for deriving "live partial-area taxonomies" is demonstrated. Copyright © 2016 Elsevier Inc. All rights reserved.

Lot quality assurance sampling to monitor supplemental immunization activity quality: an essential tool for improving performance in polio endemic countries.

PubMed

Brown, Alexandra E; Okayasu, Hiromasa; Nzioki, Michael M; Wadood, Mufti Z; Chabot-Couture, Guillaume; Quddus, Arshad; Walker, George; Sutter, Roland W

2014-11-01

Monitoring the quality of supplementary immunization activities (SIAs) is a key tool for polio eradication. Regular monitoring data, however, are often unreliable, showing high coverage levels in virtually all areas, including those with ongoing virus circulation. To address this challenge, lot quality assurance sampling (LQAS) was introduced in 2009 as an additional tool to monitor SIA quality. Now used in 8 countries, LQAS provides a number of programmatic benefits: identifying areas of weak coverage quality with statistical reliability, differentiating areas of varying coverage with greater precision, and allowing for trend analysis of campaign quality. LQAS also accommodates changes to survey format, interpretation thresholds, evaluations of sample size, and data collection through mobile phones to improve timeliness of reporting and allow for visualization of campaign quality. LQAS becomes increasingly important to address remaining gaps in SIA quality and help focus resources on high-risk areas to prevent the continued transmission of wild poliovirus. © Crown copyright 2014.

Quality Tools for Professional Higher Education Review and Improvement. PHExcel Report

ERIC Educational Resources Information Center

Jørgensen, Malene Dahl; Sparre Kristensen, Regitze; Wimpf, Alexandre; Delplace, Stefan

2014-01-01

The report is the project's first outcome, and provides an overview of quality tools, quality models and quality labels, currently in use in (professional) higher education. It is followed by a gap analysis as regards the Standards and Guidelines for quality assurance in the European Higher Education Area (ESG), and the identified characteristics…

Rationale for Quality Assurance in Fecal Egg Monitoring of Soil-Transmitted Helminthiasis

PubMed Central

Hoekendijk, David J. L.; Hill, Philip C.; Sowerby, Stephen J.

2016-01-01

Substantial investment has been made into the once “neglected” tropical disease, soil-transmitted helminthiasis, and into control programs that operate within a framework of mapping baseline disease distribution, measuring the effectiveness of applied interventions, establishing when to cease drug administration, and for posttreatment evaluations. However, critical to each of these stages is the determination of helminth infection. The limitations of traditional microscope-based fecal egg diagnostics have not provided quality assurance in the monitoring of parasite disease and suboptimal treatment regimes provide for the potential development of parasite resistance to anthelmintic drugs. Improved diagnostic and surveillance tools are required to protect therapeutic effectiveness and to maintain funder confidence. Such tools may be on the horizon with emergent technologies that offer potential for enhanced visualization and quality-assured quantitation of helminth eggs. PMID:27352875

Improving patient safety through quality assurance.

PubMed

Raab, Stephen S

2006-05-01

Anatomic pathology laboratories use several quality assurance tools to detect errors and to improve patient safety. To review some of the anatomic pathology laboratory patient safety quality assurance practices. Different standards and measures in anatomic pathology quality assurance and patient safety were reviewed. Frequency of anatomic pathology laboratory error, variability in the use of specific quality assurance practices, and use of data for error reduction initiatives. Anatomic pathology error frequencies vary according to the detection method used. Based on secondary review, a College of American Pathologists Q-Probes study showed that the mean laboratory error frequency was 6.7%. A College of American Pathologists Q-Tracks study measuring frozen section discrepancy found that laboratories improved the longer they monitored and shared data. There is a lack of standardization across laboratories even for governmentally mandated quality assurance practices, such as cytologic-histologic correlation. The National Institutes of Health funded a consortium of laboratories to benchmark laboratory error frequencies, perform root cause analysis, and design error reduction initiatives, using quality assurance data. Based on the cytologic-histologic correlation process, these laboratories found an aggregate nongynecologic error frequency of 10.8%. Based on gynecologic error data, the laboratory at my institution used Toyota production system processes to lower gynecologic error frequencies and to improve Papanicolaou test metrics. Laboratory quality assurance practices have been used to track error rates, and laboratories are starting to use these data for error reduction initiatives.

Product assurance policies and procedures for flight dynamics software development

NASA Technical Reports Server (NTRS)

Perry, Sandra; Jordan, Leon; Decker, William; Page, Gerald; Mcgarry, Frank E.; Valett, Jon

1987-01-01

The product assurance policies and procedures necessary to support flight dynamics software development projects for Goddard Space Flight Center are presented. The quality assurance and configuration management methods and tools for each phase of the software development life cycles are described, from requirements analysis through acceptance testing; maintenance and operation are not addressed.

A Microfluidic Immunostaining System Enables Quality Assured and Standardized Immunohistochemical Biomarker Analysis

NASA Astrophysics Data System (ADS)

Kwon, Seyong; Cho, Chang Hyun; Kwon, Youngmee; Lee, Eun Sook; Park, Je-Kyun

2017-04-01

Immunohistochemistry (IHC) plays an important role in biomarker-driven cancer therapy. Although there has been a high demand for standardized and quality assured IHC, it has rarely been achieved due to the complexity of IHC testing and the subjective validation-based process flow of IHC quality control. We present here a microfluidic immunostaining system for the standardization of IHC by creating a microfluidic linearly graded antibody (Ab)-staining device and a reference cell microarray. Unlike conventional efforts, our system deals primarily with the screening of biomarker staining conditions for quantitative quality assurance testing in IHC. We characterized the microfluidic matching of Ab staining intensity using three HER2 Abs produced by different manufacturers. The quality of HER2 Ab was also validated using tissues of breast cancer patients, demonstrating that our system is an efficient and powerful tool for the standardization and quality assurance of IHC.

Quality audit--a review of the literature concerning delivery of continence care.

PubMed

Swaffield, J

1995-09-01

This paper outlines the role of quality audit within the framework of quality assurance, presenting the concurrent and retrospective approaches available. The literature survey provides a review of the limited audit tools available and their application to continence services and care delivery, as well as attempts to produce tools from national and local standard setting. Audit is part of a process; it can involve staff, patients and their relatives and the team of professionals providing care, as well as focusing on organizational and management levels. In an era of market delivery of services there is a need to justify why audit is important to continence advisors and managers. Effectiveness, efficiency and economics may drive the National Health Service, but quality assurance, which includes standards and audit tools, offers the means to ensure the quality of continence services and care to patients and auditing is also required in the purchaser/provider contracts for patient services. An overview and progress to date of published and other a projects in auditing continence care and service is presented. By outlining and highlighting the audit of continence service delivery and care as a basis on which to build quality assurance programmes, it is hoped that this knowledge will be shared through the setting up of a central auditing clearing project.

Online dose reconstruction for tracked volumetric arc therapy: Real-time implementation and offline quality assurance for prostate SBRT.

PubMed

Kamerling, Cornelis Ph; Fast, Martin F; Ziegenhein, Peter; Menten, Martin J; Nill, Simeon; Oelfke, Uwe

2017-11-01

Firstly, this study provides a real-time implementation of online dose reconstruction for tracked volumetric arc therapy (VMAT). Secondly, this study describes a novel offline quality assurance tool, based on commercial dose calculation algorithms. Online dose reconstruction for VMAT is a computationally challenging task in terms of computer memory usage and calculation speed. To potentially reduce the amount of memory used, we analyzed the impact of beam angle sampling for dose calculation on the accuracy of the dose distribution. To establish the performance of the method, we planned two single-arc VMAT prostate stereotactic body radiation therapy cases for delivery with dynamic MLC tracking. For quality assurance of our online dose reconstruction method we have also developed a stand-alone offline dose reconstruction tool, which utilizes the RayStation treatment planning system to calculate dose. For the online reconstructed dose distributions of the tracked deliveries, we could establish strong resemblance for 72 and 36 beam co-planar equidistant beam samples with less than 1.2% deviation for the assessed dose-volume indicators (clinical target volume D98 and D2, and rectum D2). We could achieve average runtimes of 28-31 ms per reported MLC aperture for both dose computation and accumulation, meeting our real-time requirement. To cross-validate the offline tool, we have compared the planned dose to the offline reconstructed dose for static deliveries and found excellent agreement (3%/3 mm global gamma passing rates of 99.8%-100%). Being able to reconstruct dose during delivery enables online quality assurance and online replanning strategies for VMAT. The offline quality assurance tool provides the means to validate novel online dose reconstruction applications using a commercial dose calculation engine. © 2017 The Authors. Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Rationale for Quality Assurance in Fecal Egg Monitoring of Soil-Transmitted Helminthiasis.

PubMed

Hoekendijk, David J L; Hill, Philip C; Sowerby, Stephen J

2016-09-07

Substantial investment has been made into the once "neglected" tropical disease, soil-transmitted helminthiasis, and into control programs that operate within a framework of mapping baseline disease distribution, measuring the effectiveness of applied interventions, establishing when to cease drug administration, and for posttreatment evaluations. However, critical to each of these stages is the determination of helminth infection. The limitations of traditional microscope-based fecal egg diagnostics have not provided quality assurance in the monitoring of parasite disease and suboptimal treatment regimes provide for the potential development of parasite resistance to anthelmintic drugs. Improved diagnostic and surveillance tools are required to protect therapeutic effectiveness and to maintain funder confidence. Such tools may be on the horizon with emergent technologies that offer potential for enhanced visualization and quality-assured quantitation of helminth eggs. © The American Society of Tropical Medicine and Hygiene.

[Quality management in intensive care medicine].

PubMed

Martin, J; Braun, J-P

2014-02-01

Treatment of critical ill patients in the intensive care unit is tantamount to well-designed risk or quality management. Several tools of quality management and quality assurance have been developed in intensive care medicine. In addition to external quality assurance by benchmarking with regard to the intensive care medicine, peer review procedures have been established for external quality assurance in recent years. In the process of peer review of an intensive care unit (ICU), external physicians and nurses visit the ICU, evaluate on-site proceedings, and discuss with the managing team of the ICU possibilities for optimization. Furthermore, internal quality management in the ICU is possible based on the 10 quality indicators of the German Interdisciplinary Society for Intensive Care Medicine (DIVI, "Deutschen Interdisziplinären Vereinigung für Intensiv- und Notfallmedizin"). Thereby every ICU has numerous possibilities to improve their quality management system.

[Quality management in intensive care medicine].

PubMed

Martin, J; Braun, J-P

2013-09-01

Treatment of critical ill patients in the intensive care unit is tantamount to well-designed risk or quality management. Several tools of quality management and quality assurance have been developed in intensive care medicine. In addition to extern quality assurance by benchmarking with regard to the intensive care medicine, peer review procedures have been established for external quality assurance in recent years. In the process of peer review of an intensive care unit (ICU), external physicians and nurses visit the ICU, evaluate on-site proceedings, and discuss with the managing team of the ICU possibilities for optimization. Furthermore, internal quality management in the ICU is possible based on the 10 quality indicators of the German Interdisciplinary Society for Intensive Care Medicine (DIVI, "Deutschen Interdisziplinären Vereinigung für Intensiv- und Notfallmedizin"). Thereby every ICU has numerous possibilities to improve their quality management system.

FORTRAN tools

NASA Technical Reports Server (NTRS)

Presser, L.

1978-01-01

An integrated set of FORTRAN tools that are commercially available is described. The basic purpose of various tools is summarized and their economic impact highlighted. The areas addressed by these tools include: code auditing, error detection, program portability, program instrumentation, documentation, clerical aids, and quality assurance.

Software Quality Assurance Metrics

NASA Technical Reports Server (NTRS)

McRae, Kalindra A.

2004-01-01

Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

GEOSPATIAL QUALITY COUNCIL

EPA Science Inventory

Geospatial Science is increasingly becoming an important tool in making Agency decisions. QualIty Control and Quality Assurance are required to be integrated during the planning, implementation and assessment of geospatial databases, processes and products. In order to ensure Age...

Quality assurance in surgical oncology. Colorectal cancer as an example.

PubMed

Gunnarsson, Ulf

2003-02-01

Quality assurance in surgical oncology is a field of growing importance. National, regional and local systems have been built up in many countries. Often the quality assurance projects are linked to different registers. The advantage of such a link is the possibility of obtaining population-based data from unselected health care institutions. Few discussions of results from such projects have been published. Quality assurance of colorectal cancer surgery implies the development and use of systems for improvement all the way from detection of the cancer to the outcome as survival and patient satisfaction. To achieve this we must know what methods are being used and the outcome of our treatments. Designing processes for improvement necessitates careful planning, including decisions about end-points. Some crucial issues are discussed step-by-step in the present paper. In addition to auditing and providing collegial feedback, quality assurance is a tool for closing the gap between clinical practice and evidence based medicine and for creating new evidences as well as monitoring the introduction of new techniques and their effects.

The Assessment, Development, Assurance Pharmacist's Tool (ADAPT) for ensuring quality implementation of health promotion programs.

PubMed

Truong, Hoai-An; Taylor, Catherine R; DiPietro, Natalie A

2012-02-10

To develop and validate the Assessment, Development, Assurance Pharmacist's Tool (ADAPT), an instrument for pharmacists and student pharmacists to use in developing and implementing health promotion programs. The 36-item ADAPT instrument was developed using the framework of public health's 3 core functions (assessment, policy development, and assurance) and 10 essential services. The tool's content and usage was assessed and conducted through peer-review and initial validity testing processes. Over 20 faculty members, preceptors, and student pharmacists at 5 institutions involved in planning and implementing health promotion initiatives reviewed the instrument and conducted validity testing. The instrument took approximately 15 minutes to complete and the findings resulted in changes and improvements to elements of the programs evaluated. The ADAPT instrument fills a need to more effectively plan, develop, implement, and evaluate pharmacist-directed public health programs that are evidence-based, high-quality, and compliant with laws and regulations and facilitates documentation of pharmacists' contributions to public health.

Implementing the European Quality Assurance in Vocational Education and Training (EQAVET) at National Level: Some Insights from the PEN Leonardo Project

ERIC Educational Resources Information Center

Gatt, Suzanne; Faurschou, Kim

2016-01-01

EQAVET, the quality assurance tool in vocational and educational training, was developed in response to the need for a supply of a trained workforce for labour market needs. Implementation of EQAVET at national level, however, remains a challenge. The research reported here focused on the implementation of QA processes by VET providers in 4…

CUSTOMER/SUPPLIER ACCOUNTABILITY AND PROGRAM IMPLEMENTATION

EPA Science Inventory

Quality assurance (QA) and quality control (QC) are the basic components of a QA program, which is a fundamental quality management tool. he quality of outputs and services strongly depends on the caliber of the communications between the "customer" and the "supplier." lear under...

Field Audit Checklist Tool (FACT)

EPA Pesticide Factsheets

Download EPA's The Field Audit Checklist Tool (FACT). FACT is intended to help auditors perform field audits, to easily view monitoring plan, quality assurance and emissions data and provides access to data collected under MATS.

Effective Documentation Tools

NASA Technical Reports Server (NTRS)

Sleboda, Claire

1997-01-01

Quality assurance programs provide a very effective means to monitor and evaluate medical care. Quality assurance involves: (1) Identify a problem; (2) Determine the source and nature of the problem; (3) Develop policies and methods to effect improvement; (4) Implement those polices; (5) Monitor the methods applied; and (6) Evaluate their effectiveness. Because this definition of quality assurance so closely resembles the Nursing Process, the health unit staff was able to use their knowledge of the nursing process to develop many forms which improve the quality of patient care. These forms include the NASA DFRC Service Report, the occupational injury form (Incident Report), the patient survey (Pre-hospital Evaluation/Care Report), the Laboratory Log Sheet, the 911 Run Sheet, and the Patient Assessment Stamp. Examples and steps which are followed to generate these reports are described.

GEOSPATIAL QA

EPA Science Inventory

Geospatial Science is increasingly becoming an important tool in making Agency decisions. Quality Control and Quality Assurance are required to be integrated during the planning, implementation and assessment of geospatial databases, processes and products. In order to ensure Age...

Maturity method demonstration : final report.

DOT National Transportation Integrated Search

2003-07-01

The concrete maturity method is a quality control/quality assurance tool that can be used to assist contractors and transportation officials in producing cost-efficient, durable concrete structures. This report documents the findings of an investigat...

Developing and Implementing a Quality Assurance Strategy for Electroconvulsive Therapy.

PubMed

Hollingsworth, Jessa; Baliko, Beverly; McKinney, Selina; Rosenquist, Peter

2018-04-17

The literature provides scant guidance in effective quality assurance strategies concerning the use of electroconvulsive therapy (ECT) for the treatment of psychiatric conditions. Numerous guidelines are published that provide guidance in the delivery of care; however, little has been done to determine how a program or facility might ensure compliance to best practice for safety, tolerability, and efficacy in performing ECT. The objective of this project was to create a quality assurance strategy specific to ECT. Determining standards for quality care and clarifying facility policy were key outcomes in establishing an effective quality assurance strategy. An audit tool was developed utilizing quality criteria derived from a systematic review of ECT practice guidelines, peer review, and facility policy. All ECT procedures occurring over a 2-month period of May to June 2017 were retrospectively audited and compared against target compliance rates set for the facility's ECT program. Facility policy was adapted to reflect quality standards, and audit findings were used to inform possible practice change initiatives, were used to create benchmarks for continuous quality monitoring, and were integrated into regular hospital quality meetings. Clarification on standards of care and the use of clinical auditing in ECT was an effective starting point in the development of a quality assurance strategy. Audit findings were successfully integrated into the hospital's overall quality program, and recognition of practice compliance informed areas for future quality development and policy revision in this small community-based hospital in the southeastern United States. This project sets the foundation for a quality assurance strategy that can be used to help monitor procedural safety and guide future improvement efforts in delivering ECT. Although it is just the first step in creating meaningful quality improvement, setting clear standards and identifying areas of greatest clinical need were crucial beginning for this hospital's growing program.

Software quality: Process or people

NASA Technical Reports Server (NTRS)

Palmer, Regina; Labaugh, Modenna

1993-01-01

This paper will present data related to software development processes and personnel involvement from the perspective of software quality assurance. We examine eight years of data collected from six projects. Data collected varied by project but usually included defect and fault density with limited use of code metrics, schedule adherence, and budget growth information. The data are a blend of AFSCP 800-14 and suggested productivity measures in Software Metrics: A Practioner's Guide to Improved Product Development. A software quality assurance database tool, SQUID, was used to store and tabulate the data.

Quality assurance of nursing web sites: development and implications of the ALEU method.

PubMed

Cambil-Martín, Jacobo; Flynn, Maria; Villaverde-Gutiérrez, Carmen

2011-09-01

This article presents a study that evaluated the physical accessibility, readability, and usability of Spanish nursing Web sites and discusses the quality assurance issues raised, which are relevant to the wider nursing community. The Internet is recognized as an important source of health information for both nurses and the general public. Although it makes health-related information universally available, the wide variation in the overall quality of health Web sites is problematic. This raises many questions for the nursing profession: about what constitutes a good-quality Web site, about the nature of the information that nurses are finding and using to support their professional education, research, and clinical practice, and about the impact that Internet information ultimately has on health interactions and nursing care. The process of completing this small study showed that it is possible to usefully assess dimensions of Web site quality and suggested that it may be feasible to develop tools to help nurses evaluate national and international nursing Web sites. More research is needed to understand how nurses use the Internet to support their everyday professional practices, but the development and application of international Web site quality assurance tools may be important for maintaining professional nursing standards in the Internet age.

[Current developments in the German Perinatal Survey. Modular analysis tools operating on a database platform].

PubMed

Lack, N

2001-08-01

The introduction of the modified data set for quality assurance in obstetrics (formerly perinatal survey) in Lower Saxony and Bavaria as early as 1999 saw the urgent requirement for a corresponding new statistical analysis of the revised data. The general outline of a new data reporting concept was originally presented by the Bavarian Commission for Perinatology and Neonatology at the Munich Perinatal Conference in November 1997. These ideas are germinal to content and layout of the new quality report for obstetrics currently in its nationwide harmonisation phase coordinated by the federal office for quality assurance in hospital care. A flexible and modular database oriented analysis tool developed in Bavaria is now in its second year of successful operation. The functionalities of this system are described in detail.

DICOM index tracker enterprise: advanced system for enterprise-wide quality assurance and patient safety monitoring

NASA Astrophysics Data System (ADS)

Zhang, Min; Pavlicek, William; Panda, Anshuman; Langer, Steve G.; Morin, Richard; Fetterly, Kenneth A.; Paden, Robert; Hanson, James; Wu, Lin-Wei; Wu, Teresa

2015-03-01

DICOM Index Tracker (DIT) is an integrated platform to harvest rich information available from Digital Imaging and Communications in Medicine (DICOM) to improve quality assurance in radiology practices. It is designed to capture and maintain longitudinal patient-specific exam indices of interests for all diagnostic and procedural uses of imaging modalities. Thus, it effectively serves as a quality assurance and patient safety monitoring tool. The foundation of DIT is an intelligent database system which stores the information accepted and parsed via a DICOM receiver and parser. The database system enables the basic dosimetry analysis. The success of DIT implementation at Mayo Clinic Arizona calls for the DIT deployment at the enterprise level which requires significant improvements. First, for geographically distributed multi-site implementation, the first bottleneck is the communication (network) delay; the second is the scalability of the DICOM parser to handle the large volume of exams from different sites. To address this issue, DICOM receiver and parser are separated and decentralized by site. To facilitate the enterprise wide Quality Assurance (QA), a notable challenge is the great diversities of manufacturers, modalities and software versions, as the solution DIT Enterprise provides the standardization tool for device naming, protocol naming, physician naming across sites. Thirdly, advanced analytic engines are implemented online which support the proactive QA in DIT Enterprise.

WHO Expert Committee on Specifications for Pharmaceutical Preparations.

PubMed

2014-01-01

The Expert Committee on Specifications for Pharmaceutical Preparations works towards clear, independent and practical standards and guidelines for the quality assurance of medicines. Standards are developed by the Committee through worldwide consultation and an international consensus-building process. The following new guidelines were adopted and recommended for use, in addition to 20 monographs and general texts for inclusion in The International Pharmacopoeia and 11 new International Chemical Reference Substances. The International Pharmacopoeia--updating mechanism for the section on radiopharmaceuticals; WHO good manufacturing practices for pharmaceutical products: main principles; Model quality assurance system for procurement agencies; Assessment tool based on the model quality assurance system for procurement agencies: aide-memoire for inspection; Guidelines on submission of documentation for prequalification of finished pharmaceutical products approved by stringent regulatory authorities; and Guidelines on submission of documentation for a multisource (generic) finished pharmaceutical product: quality part.

Diabetes care may be improved with Steno Quality Assurance Tool--a self-assessment tool in diabetes management.

PubMed

Bjerre-Christensen, Ulla; Nielsen, Annemette Anker; Binder, Christian; Hansen, Jes B; Eldrup, Ebbe

2014-08-01

To evaluate if improvements in the quality of diabetes care in Indian clinics can be obtained by simple self-surveillance PC-based software. Nineteen Indian diabetes clinics were introduced to the principles of quality assurance (QA), and to a software program, the Steno Quality Assurance Tool (SQAT). Data was entered for an initial 3 months period. Subsequently data were analyzed by the users, who designed plans to improve indicator status and set goals for the upcoming period. A second data entry period followed after 7-9 months. QA data was analyzed from 4487 T2DM patients (baseline) and 4440 (follow-up). The average examination frequency per clinic of the following indicators increased significantly: lipid examination (72-87%) (p=0.007), foot examination (80-94%) (p=0.02), HbA1c investigation (59-77%) (p=0.006), and urine albumin excretion investigation (72-87%) (p=0.006). Outcome parameters also improved significantly: mean (SD) fasting and post prandial BG reduced from 144(16) to 132(16)mg/dl (p=0.02) and 212(24)-195(29)mg/dl (p=0.03), respectively. Systolic BP reduced from 139(6) to 133(4) (p=0.0008)mmHg and diastolic BP from 83(3) to 81(3)mmHg (p=0.002). Quality of diabetes care can be improved by applying SQAT, a QA self-surveillance software that enables documentation of changes in process and outcome indicators. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

A scenario for a web-based radiation treatment planning structure: A new tool for quality assurance procedure?

PubMed

Kouloulias, V E; Ntasis, E; Poortmans, Ph; Maniatis, T A; Nikita, K S

2003-01-01

The desire to develop web-based platforms for remote collaboration among physicians and technologists is becoming a great challenge. In this paper we describe a web-based radiotherapy treatment planning (WBRTP) system to facilitate decentralized radiotherapy services by allowing remote treatment planning and quality assurance (QA) of treatment delivery. Significant prerequisites are digital storage of relevant data as well as efficient and reliable telecommunication system between collaborating units. The system of WBRTP includes video conferencing, display of medical images (CT scans, dose distributions etc), replication of selected data from a common database, remote treatment planning, evaluation of treatment technique and follow-up of the treated patients. Moreover the system features real-time remote operations in terms of tele-consulting like target volume delineation performed by a team of experts at different and distant units. An appraisal of its possibilities in quality assurance in radiotherapy is also discussed. As a conclusion, a WBRTP system would not only be a medium for communication between experts in oncology but mainly a tool for improving the QA in radiotherapy.

Usalpharma: A Cloud-Based Architecture to Support Quality Assurance Training Processes in Health Area Using Virtual Worlds

PubMed Central

García-Peñalvo, Francisco J.; Pérez-Blanco, Jonás Samuel; Martín-Suárez, Ana

2014-01-01

This paper discusses how cloud-based architectures can extend and enhance the functionality of the training environments based on virtual worlds and how, from this cloud perspective, we can provide support to analysis of training processes in the area of health, specifically in the field of training processes in quality assurance for pharmaceutical laboratories, presenting a tool for data retrieval and analysis that allows facing the knowledge discovery in the happenings inside the virtual worlds. PMID:24778593

Evaluation of Micronutrient Sensors for Food Matrices in Resource-Limited Settings: A Systematic Narrative Review.

PubMed

Waller, Anna W; Lotton, Jennifer L; Gaur, Shashank; Andrade, Jeanette M; Andrade, Juan E

2018-06-21

In resource-limited settings, mass food fortification is a common strategy to ensure the population consumes appropriate quantities of essential micronutrients. Food and government organizations in these settings, however, lack tools to monitor the quality and compliance of fortified products and their efficacy to enhance nutrient status. The World Health Organization has developed general guidelines known as ASSURED (Affordable, Sensitive, Specific, User-friendly, Rapid and Robust, Equipment-free, and Deliverable to end-users) to aid the development of useful diagnostic tools for these settings. These guidelines assume performance aspects such as sufficient accuracy, reliability, and validity. The purpose of this systematic narrative review is to examine the micronutrient sensor literature on its adherence towards the ASSURED criteria along with accuracy, reliability, and validation when developing micronutrient sensors for resource-limited settings. Keyword searches were conducted in three databases: Web of Science, PubMed, and Scopus and were based on 6-point inclusion criteria. A 16-question quality assessment tool was developed to determine the adherence towards quality and performance criteria. Of the 2,365 retrieved studies, 42 sensors were included based on inclusion/exclusion criteria. Results showed that improvements to the current sensor design are necessary, especially their affordability, user-friendliness, robustness, equipment-free, and deliverability within the ASSURED criteria, and accuracy and validity of the additional criteria to be useful in resource-limited settings. Although it requires further validation, the 16-question quality assessment tool can be used as a guide in the development of sensors for resource-limited settings. © 2018 Institute of Food Technologists®.

External quality assurance for HIV point-of-care testing in Africa: A collaborative country-partner approach to strengthen diagnostic services

PubMed Central

2016-01-01

It is important to consider the role of diagnostics and the critical need for quality diagnostics services in resource-limited settings. Accurate diagnostic tests play a key role in patient management and the prevention and control of most infectious diseases. As countries plan for implementation of HIV early infant diagnosis and viral load point-of-care testing, the London School of Hygiene & Tropical Medicine has worked with countries and partners with an interest in external quality assurance to support quality point-of-care testing on the continent. Through a series of collaborative consultations and workshops, the London School of Hygiene & Tropical Medicine has gathered lessons learned, tools, and resources and developed quality assurance models that will support point-of-care testing. The London School of Hygiene & Tropical Medicine is committed to the continued advancement of laboratory diagnostics in Africa and quality laboratory services and point-of-care testing. PMID:28879132

Italian quality assurance in mental health.

PubMed

Rossi, Giovanni; Agnetti, Germana; Bosio, Roberto; De Luca, Pasquale; Erlicher, Arcadio; Morganti, Carla; Neri, Giovanni; Re, Edoardo; Semisa, Domenico; Fioritti, Angelo

2014-06-01

Since the radical changes in Italian mental health law in the 1970s, quality assurance models have gained consensus as the most suitable service assessment tool. In the 1990s, the whole Italian National Health System changed into a corporate model, and an accreditation system was implemented.The Italian Association for Quality and Accreditation in Mental Health (Associazione Italiana per la Qualità e l'Accreditamento in Salute Mentale [QUASM]) was founded in 1984, and since then, it offers consultation and support for Mental Health Departments and Regional Governments to help them to develop psychiatric programs, self-evaluation, educational programs, and professional peer-model accreditation. The QUASM accreditation manual has now gone through several revisions, the last in 2008. Until 2008, QUASM was successful in promoting quality and facilitating both institutional and professional accreditation. However, radical changes triggered by financial crisis have jeopardized quality assurance implementation. Nowadays, the challenge for QUASM is to maintain quality and accreditation geared to excellence against prevailing leveling trends.

Monitoring Compliance to Promote Quality Assurance: Development of a Mental Health Clinical Chart Audit Tool in Belize, 2013.

PubMed

Winer, Rachel A; Bennett, Eleanor; Murillo, Illouise; Schuetz-Mueller, Jan; Katz, Craig L

2015-09-01

Belize trained psychiatric nurse practitioners (PNPs) in the early 1990s to provide mental health services throughout the country. Despite overwhelming success, the program is limited by lack of monitoring, evaluation, and surveillance. To promote quality assurance, we developed a chart audit tool to monitor mental healthcare delivery compliance for initial psychiatric assessment notes completed by PNPs. After reviewing the Belize Health Information System electronic medical record system, we developed a clinical audit tool to capture 20 essential components for initial assessment clinical notes. The audit tool was then piloted for initial assessment notes completed during July through September of 2013. One hundred and thirty-four initial psychiatric interviews were audited. The average chart score among all PNPs was 9.57, ranging from 3 to 15. Twenty-three charts-or 17.2%-had a score of 14 or higher and met a 70% compliance benchmark goal. Among indicators most frequently omitted included labs ordered and named (15.7%) and psychiatric diagnosis (21.6%). Explicit statement of medications initiated with dose and frequency occurred in 47.0% of charts. Our findings provide direction for training and improvement, such as emphasizing the importance of naming labs ordered, medications and doses prescribed, and psychiatric diagnoses in initial assessment clinical notes. We hope this initial assessment helps enhance mental health delivery compliance by prompting creation of BHIS templates, development of audits tools for revisit follow-up visits, and establishment of corrective actions for low-scoring practitioners. These efforts may serve as a model for implementing quality assurance programming in other low resource settings.

Field correlation of PQI gauge with nuclear density gauge: phase 1.

DOT National Transportation Integrated Search

2006-12-01

Traditionally, the Oklahoma Department of Transportation (ODOT) uses a nuclear density gauge as a quality control (QC) and quality assurance (QA) tool for in-place density. The nuclear-based devices, however, tend to have problems associated with lic...

Integrating Safety and Mission Assurance into Systems Engineering Modeling Practices

NASA Technical Reports Server (NTRS)

Beckman, Sean; Darpel, Scott

2015-01-01

During the early development of products, flight, or experimental hardware, emphasis is often given to the identification of technical requirements, utilizing such tools as use case and activity diagrams. Designers and project teams focus on understanding physical and performance demands and challenges. It is typically only later, during the evaluation of preliminary designs that a first pass, if performed, is made to determine the process, safety, and mission quality assurance requirements. Evaluation early in the life cycle, though, can yield requirements that force a fundamental change in design. This paper discusses an alternate paradigm for using the concepts of use case or activity diagrams to identify safety hazard and mission quality assurance risks and concerns using the same systems engineering modeling tools being used to identify technical requirements. It contains two examples of how this process might be used in the development of a space flight experiment, and the design of a Human Powered Pizza Delivery Vehicle, along with the potential benefits to decrease development time, and provide stronger budget estimates.

Towards a Systematic Screening Tool for Quality Assurance and Semiautomatic Fraud Detection for Images in the Life Sciences.

PubMed

Koppers, Lars; Wormer, Holger; Ickstadt, Katja

2017-08-01

The quality and authenticity of images is essential for data presentation, especially in the life sciences. Questionable images may often be a first indicator for questionable results, too. Therefore, a tool that uses mathematical methods to detect suspicious images in large image archives can be a helpful instrument to improve quality assurance in publications. As a first step towards a systematic screening tool, especially for journal editors and other staff members who are responsible for quality assurance, such as laboratory supervisors, we propose a basic classification of image manipulation. Based on this classification, we developed and explored some simple algorithms to detect copied areas in images. Using an artificial image and two examples of previously published modified images, we apply quantitative methods such as pixel-wise comparison, a nearest neighbor and a variance algorithm to detect copied-and-pasted areas or duplicated images. We show that our algorithms are able to detect some simple types of image alteration, such as copying and pasting background areas. The variance algorithm detects not only identical, but also very similar areas that differ only by brightness. Further types could, in principle, be implemented in a standardized scanning routine. We detected the copied areas in a proven case of image manipulation in Germany and showed the similarity of two images in a retracted paper from the Kato labs, which has been widely discussed on sites such as pubpeer and retraction watch.

Utilization of Light Detection and Ranging for Quality Control and Quality Assurance of Pavement Grades

DOT National Transportation Integrated Search

2018-02-01

Light Detection and Ranging (Lidar) technology is a useful tool that can assist transportation agencies during the design, construction, and maintenance phases of transportation projects. To demonstrate the utility of Lidar, this report discusses how...

An empirical evaluation of software quality assurance practices and challenges in a developing country: a comparison of Nigeria and Turkey.

PubMed

Sowunmi, Olaperi Yeside; Misra, Sanjay; Fernandez-Sanz, Luis; Crawford, Broderick; Soto, Ricardo

2016-01-01

The importance of quality assurance in the software development process cannot be overemphasized because its adoption results in high reliability and easy maintenance of the software system and other software products. Software quality assurance includes different activities such as quality control, quality management, quality standards, quality planning, process standardization and improvement amongst others. The aim of this work is to further investigate the software quality assurance practices of practitioners in Nigeria. While our previous work covered areas on quality planning, adherence to standardized processes and the inherent challenges, this work has been extended to include quality control, software process improvement and international quality standard organization membership. It also makes comparison based on a similar study carried out in Turkey. The goal is to generate more robust findings that can properly support decision making by the software community. The qualitative research approach, specifically, the use of questionnaire research instruments was applied to acquire data from software practitioners. In addition to the previous results, it was observed that quality assurance practices are quite neglected and this can be the cause of low patronage. Moreover, software practitioners are neither aware of international standards organizations or the required process improvement techniques; as such their claimed standards are not aligned to those of accredited bodies, and are only limited to their local experience and knowledge, which makes it questionable. The comparison with Turkey also yielded similar findings, making the results typical of developing countries. The research instrument used was tested for internal consistency using the Cronbach's alpha, and it was proved reliable. For the software industry in developing countries to grow strong and be a viable source of external revenue, software assurance practices have to be taken seriously because its effect is evident in the final product. Moreover, quality frameworks and tools which require minimum time and cost are highly needed in these countries.

Relational-database model for improving quality assurance and process control in a composite manufacturing environment

NASA Astrophysics Data System (ADS)

Gentry, Jeffery D.

2000-05-01

A relational database is a powerful tool for collecting and analyzing the vast amounts of inner-related data associated with the manufacture of composite materials. A relational database contains many individual database tables that store data that are related in some fashion. Manufacturing process variables as well as quality assurance measurements can be collected and stored in database tables indexed according to lot numbers, part type or individual serial numbers. Relationships between manufacturing process and product quality can then be correlated over a wide range of product types and process variations. This paper presents details on how relational databases are used to collect, store, and analyze process variables and quality assurance data associated with the manufacture of advanced composite materials. Important considerations are covered including how the various types of data are organized and how relationships between the data are defined. Employing relational database techniques to establish correlative relationships between process variables and quality assurance measurements is then explored. Finally, the benefits of database techniques such as data warehousing, data mining and web based client/server architectures are discussed in the context of composite material manufacturing.

Spinal cord testing: auditing for quality assurance.

PubMed

Marr, J A; Reid, B

1991-04-01

A quality assurance audit of spinal cord testing as documented by staff nurses was carried out. Twenty-five patient records were examined for accuracy of documented testing and compared to assessments performed by three investigators. A pilot study established interrater reliability of a tool that was designed especially for this study. Results indicated staff nurses failed to meet pre-established 100% standard in all categories of testing when compared with investigator's findings. Possible reasons for this disparity are discussed as well as indications for modifications in the spinal testing record, teaching program and preset standards.

owl-qa | Informatics Technology for Cancer Research (ITCR)

Cancer.gov

owl-qa is an OWL-based QA tool for cancer study CDEs. The tool uses the combination of the NCI Thesaurus and additional disjointness axioms to detect potential errors and duplications in the data element definitions. The tool comprises three modules: Data Integration and Services Module; Compositional Expression Transformation Module; and OWL-based Quality Assurance Module.

Many roads may lead to Rome: Selected features of quality control within environmental assessment systems in the US, NL, CA, and UK

DOE Office of Scientific and Technical Information (OSTI.GOV)

Günther, Markus, E-mail: markus.guenther@tu-berlin.de; Geißler, Gesa; Köppel, Johann

As there is no one-and-only concept on how to precisely define and establish quality control (QC) or quality assurance (QA) in the making of environmental assessments (EA), this paper presents selected features of international approaches that address quality in EA systems in the USA, the Netherlands, Canada, and the United Kingdom. Based on explanative case studies, we highlight the embedding of specific quality control features within the EA systems, the objectives and processes, and relevant transparency challenges. Such features of QC/QA approaches can be considered in cases where substantial quality control and assurance efforts are still missing. Yet further researchmore » needs to be conducted on the efficacy of these approaches, which remains beyond the scope of this study. - Highlights: • We present four tools for quality control and assurance from different EA systems. • Approaches vary in institutional setting, objectives, procedures, and transparency. • Highlighted features might provide guidance in cases where QC/QA is still lacking.« less

Application of refractometry to quality assurance monitoring of parenteral nutrition solutions.

PubMed

Chang, Wei-Kuo; Chao, You-Chen; Yeh, Ming-Kung

2008-01-01

Parenteral nutrition (PN) solution contains various concentrations of dextrose, amino acids, lipids, vitamins, electrolytes, and trace elements. Incorrect preparation of PN solution could lead to patient death. In this study we used the refractive index as a quality assurance tool to monitor the preparation of PN solution. Refractive indices of single nutrient components and PN solutions consisting of various concentrations of dextrose, amino acids, electrolytes, and lipids were measured. A mathematical equation and its linear plot were generated then used to predict the refractive index of the PN solution. The best-fit refractive index for PN solution (i.e., the predicted refractive index)=0.9798x(% dextrose)+1.2889x(% amino acids)+1.1017x(% lipids)+0.9440x(% sum of the electrolytes)+0.5367 (r2=0.99). This equation was validated by comparing the measured refractive indices of 500 clinical PN solutions to their predicted refractive indices. We found that 2 of the 500 prepared samples (0.4%) had less than the predicted refractive index (<95%). Refractive index can be used as a reliable quality assurance tool for monitoring PN preparation. Such information can be obtained at the bedside and used to confirm the accuracy of the PN solution composition.

[Development of methods and instruments for external quality assurance in inpatient parent-child rehabilitation and prevention].

PubMed

Neuderth, S; Lukasczik, M; Musekamp, G; Gerlich, C; Saupe-Heide, M; Löbmann, R; Vogel, H

2013-02-01

There so far is no standardized program for external quality assurance in inpatient parent-child prevention and rehabilitation in Germany. Therefore, instruments and methods of external quality assurance were developed and evaluated on behalf of the federal-level health insurance institutions. On the level of structure quality, a modular questionnaire for assessing structural features of rehabilitation/prevention centers, basic and allocation criteria as well as a checklist for visitations were developed. Structural data were collected in a nationwide survey of parent-child prevention and rehabilitation centers. Process and outcome quality data were collected in n=38 centers. Process quality was assessed using multiple methods (process-related structural features, case-related routine documentation, and incident-related patient questionnaires). Outcome quality was measured via patient questionnaires (n=1 799 patients). We used a multi-level modelling approach by adjusting relevant confounders on institutional and patient levels. The methods, instruments and analyzing procedures developed for measuring quality on the level of structure, processes and outcomes were adjusted in cooperation with all relevant stakeholders. Results are exemplarily presented for all quality assurance tools. For most of the risk-adjusted outcome parameters, we found no significant differences between institutions. For the first time, a comprehensive, standardized and generally applicable set of methods and instruments for routine use in comparative quality measurement of inpatient parent-child prevention and rehabilitation is available. However, it should be considered that the very heterogeneous field of family-oriented measures can not be covered entirely by an external quality assurance program. Therefore, methods and instruments have to be adapted continuously to the specifics of this area of health care and to new developments. © Georg Thieme Verlag KG Stuttgart · New York.

MODELLING QUALITY ASSURANCE PLAN FOR THE LAKE MICHIGAN MASS BALANCE PROJECT

EPA Science Inventory

With the ever increasing complexity and costs of ecosystem protection and remediation, the USEPA is placing more emphasis on ensuring the quality and credibility of scientific tools, such as models, that are used to help guide decision-makers who are faced with difficult manageme...

Assuring Graduate Competency: A Technology Acceptance Model for Course Guide Tools

ERIC Educational Resources Information Center

Atif, Amara; Richards, Deborah; Busch, Peter; Bilgin, Ayse

2015-01-01

Higher education institutions typically express the quality of their degree programs by describing the qualities, skills, and understanding their students possess upon graduation. One promising instructional design approach to facilitate institutions' efforts to deliver graduates with the appropriate knowledge and competencies is curriculum…

STORM WATER MANAGEMENT MODEL QUALITY ASSURANCE REPORT: DYNAMIC WAVE FLOW ROUTING

EPA Science Inventory

The Storm Water Management Model (SWMM) is a computer-based tool for simulating storm water runoff quantity and quality from primarily urban areas. In 2002 the U.S. Environmental Protection Agency’s Water Supply and Water Resources Division partnered with the consulting firm CDM ...

[Quality assurance of the renal applications software].

PubMed

del Real Núñez, R; Contreras Puertas, P I; Moreno Ortega, E; Mena Bares, L M; Maza Muret, F R; Latre Romero, J M

2007-01-01

The need for quality assurance of all technical aspects of nuclear medicine studies is widely recognised. However, little attention has been paid to the quality assurance of the applications software. Our work reported here aims at verifying the analysis software for processing of renal nuclear medicine studies (renograms). The software tools were used to build a synthetic dynamic model of renal system. The model consists of two phases: perfusion and function. The organs of interest (kidneys, bladder and aortic artery) were simple geometric forms. The uptake of the renal structures was described by mathematic functions. Curves corresponding to normal or pathological conditions were simulated for kidneys, bladder and aortic artery by appropriate selection of parameters. There was no difference between the parameters of the mathematic curves and the quantitative data produced by the renal analysis program. Our test procedure is simple to apply, reliable, reproducible and rapid to verify the renal applications software.

Toward an evidence-based system for innovation support for implementing innovations with quality: tools, training, technical assistance, and quality assurance/quality improvement.

PubMed

Wandersman, Abraham; Chien, Victoria H; Katz, Jason

2012-12-01

An individual or organization that sets out to implement an innovation (e.g., a new technology, program, or policy) generally requires support. In the Interactive Systems Framework for Dissemination and Implementation, a Support System should work with Delivery Systems (national, state and/or local entities such as health and human service organizations, community-based organizations, schools) to enhance their capacity for quality implementation of innovations. The literature on the Support System [corrected] has been underresearched and under-developedThis article begins to conceptualize theory, research, and action for an evidence-based system for innovation support (EBSIS). EBSIS describes key priorities for strengthening the science and practice of support. The major goal of EBSIS is to enhance the research and practice of support in order to build capacity in the Delivery System for implementing innovations with quality, and thereby, help the Delivery System achieve outcomes. EBSIS is guided by a logic model that includes four key support components: tools, training, technical assistance, and quality assurance/quality improvement. EBSIS uses the Getting To Outcomes approach to accountability to aid the identification and synthesis of concepts, tools, and evidence for support. We conclude with some discussion of the current status of EBSIS and possible next steps, including the development of collaborative researcher-practitioner-funder-consumer partnerships to accelerate accumulation of knowledge on the Support System.

Expediting the Quest for Quality: The Role of IQAC in Academic Audit

ERIC Educational Resources Information Center

Nitonde, Rohidas

2016-01-01

Academic Audit is an important tool to control and maintain standards in academic sector. It has been found highly relevant by the experts across the world. Academic audit helps institutions to introspect and improve their quality. The present paper intends to probe into the possible role of Internal Quality Assurance Cell (IQAC) in Academic Audit…

Assessing and Managing Quality of Information Assurance

DTIC Science & Technology

2010-11-01

such as firewalls, antivirus scanning tools and mechanisms for user authentication and authorization. Advanced mission-critical systems often...imply increased risk to DoD information systems. The Process and Organizational Maturity (POM) class focuses on the maturity of the software and...include architectural quality. Common Weakness Enumeration (CWE) is a recent example that highlights the connection between software quality and

Web Analytics

EPA Pesticide Factsheets

EPA’s Web Analytics Program collects, analyzes, and provides reports on traffic, quality assurance, and customer satisfaction metrics for EPA’s website. The program uses a variety of analytics tools, including Google Analytics and CrazyEgg.

Accreditations as Local Management Tools

ERIC Educational Resources Information Center

Cret, Benoit

2011-01-01

The development of accreditation agencies within the Higher Education sector in order to assess and guarantee the quality of services or product is still a growing phenomenon in Europe. Accreditations are conceived by institutional authors and by authors who directly deal with quality assurance processes as a means of legitimization or a means of…

Assuring quality health care outcomes: lessons learned from car dealers?

PubMed Central

Dimsdale, Joel E

2017-01-01

Health care systems want quality but struggle to find the right tools because, typically, they track quality in only one or two ways. Because of the complexity of health care, high quality will emerge only when health care systems employ multiple approaches, including, importantly, patient-reported outcome perspectives. Sustained changes are unlikely to emerge in the absence of such multipronged interventions. PMID:28123314

[Quality of life and vertigo after bilateral cochlear implantation : Questionnaires as tools for quality assurance].

PubMed

Rader, T; Haerterich, M; Ernst, B P; Stöver, T; Strieth, S

2018-03-01

Persistent dizziness symptoms after cochlear implantation have an impact on quality of life. In this study, the effects of bilateral cochlear implants (CI) on quality of life as well as on subjective dizziness complaints are analyzed using questionnaires, some of which have never been applied before in these patient collectives. In this article, questionnaires for the assessment of dizziness symptoms and quality of life are introduced in order to realize quality assurance. A total of 32 patients with bilateral CI were questioned regarding dizziness symptoms and quality of life. The Nijmegen Cochlear Implant Questionnaire (NCIQ) was used. In the case of reported regular dizziness, the Vertigo Handicap Questionnaire (VHQ) and the Vertigo Symptom Scale (VSS) were also assessed. Persistent dizziness symptoms were shown in 8 of 32 patients. Quality of life was measured with the NCIQ and was improved significantly (p < 0.001) by 23.7% after the second CI. The dizziness symptoms changed slightly (VHQ -11.2%; VSS +16.4%) after the second implantation. The results show that the questionnaires are valid instruments for documenting quality of life and dizziness symptoms for quality assurance. These questionnaires may be applied as a complement or an alternative to device-based measurements of peripheral vestibular dysfunction.

Chiropractic quality assurance: standards and guidelines

PubMed Central

Gatterman, Meridel I; Dobson, Thomas P; LeFevbre, Ron

2001-01-01

Chiropractic quality assurance involves development of both clinical guidelines and standards. Confusion generated by poor differentiation of guidelines from standards contributes to mistrust of the guideline development process. Guidelines are considered to be recommendations that allow for flexibility and individual patient differences. Standards are more binding and require a high level of supporting evidence. While guidelines serve as educational tools to improve the quality of practice, standards that outline minimum competency are used more as administrative tools on which to base policy. Barriers to development of clinical guidelines and standards include fear that they will create prescriptive “cookbook” practice, and the distrust that guidelines are developed primarily for cost containment. Clinicians also criticize guidelines developed by academics that don't relate to practice, and those based on evidence that lacks clinical relevance. Conflicting guidelines perceived to be based on strong bias or conflict of interest are also suspect. To reduce barriers to acceptance and implementation, guidelines should be inclusive, patient-centered, and based on a variety of evidence and clinical experience.

QUALITY ASSURANCE AND QUALITY CONTROL IN THE DEVELOPMENT AND APPLICATION OF THE AUTOMATED GEOSPATIAL WATERSHED ASSESSMENT (AGWA) TOOL

EPA Science Inventory

Planning and assessment in land and water resource management are evolving from simple, local-scale problems toward complex, spatially explicit regional ones. Such problems have to be addressed with distributed models that can compute runoff and erosion at different spatial and t...

Exploring the Use of Best-Worst Scaling to Elicit Course Experience Questionnaire Responses

ERIC Educational Resources Information Center

Huybers, Twan

2017-01-01

Students are an important stakeholder group in the context of quality assurance in higher education. From their perspective as learners, students' views on educational experiences are increasingly used as an indicator of educational quality. The Course Experience Questionnaire (CEQ) is a widely used quantitative tool to gauge students' perceptions…

[Development of quality assurance/quality control web system in radiotherapy].

PubMed

Okamoto, Hiroyuki; Mochizuki, Toshihiko; Yokoyama, Kazutoshi; Wakita, Akihisa; Nakamura, Satoshi; Ueki, Heihachi; Shiozawa, Keiko; Sasaki, Koji; Fuse, Masashi; Abe, Yoshihisa; Itami, Jun

2013-12-01

Our purpose is to develop a QA/QC (quality assurance/quality control) web system using a server-side script language such as HTML (HyperText Markup Language) and PHP (Hypertext Preprocessor), which can be useful as a tool to share information about QA/QC in radiotherapy. The system proposed in this study can be easily built in one's own institute, because HTML can be easily handled. There are two desired functions in a QA/QC web system: (i) To review the results of QA/QC for a radiotherapy machine, manuals, and reports necessary for routinely performing radiotherapy through this system. By disclosing the results, transparency can be maintained, (ii) To reveal a protocol for QA/QC in one's own institute using pictures and movies relating to QA/QC for simplicity's sake, which can also be used as an educational tool for junior radiation technologists and medical physicists. By using this system, not only administrators, but also all staff involved in radiotherapy, can obtain information about the conditions and accuracy of treatment machines through the QA/QC web system.

Innovative Quality-Assurance Strategies for Tuberculosis Surveillance in the United States

PubMed Central

Manangan, Lilia Ponce; Tryon, Cheryl; Magee, Elvin; Miramontes, Roque

2012-01-01

Introduction. The Centers for Disease Control and Prevention (CDC)'s National Tuberculosis Surveillance System (NTSS) is the national repository of tuberculosis (TB) data in the United States. Jurisdictions report to NTSS through the Report of Verified Case of Tuberculosis (RVCT) form that transitioned to a web-based system in 2009. Materials and Methods. To improve RVCT data quality, CDC conducted a quality assurance (QA) needs assessment to develop QA strategies. These include QA components (case detection, data accuracy, completeness, timeliness, data security, and confidentiality); sample tools such as National TB Indicators Project (NTIP) to identify TB case reporting discrepancies; comprehensive training course; resource guide and toolkit. Results and Discussion. During July–September 2011, 73 staff from 34 (57%) of 60 reporting jurisdictions participated in QA training. Participants stated usefulness of sharing jurisdictions' QA methods; 66 (93%) wrote that the QA tools will be effective for their activities. Several jurisdictions reported implementation of QA tools pertinent to their programs. Data showed >8% increase in NTSS and NTIP enrollment through Secure Access Management Services, which monitors system usage, from August 2011–February 2012. Conclusions. Despite challenges imposed by web-based surveillance systems, QA strategies can be developed with innovation and collaboration. These strategies can also be used by other disease programs to ensure high data quality. PMID:22685648

Analysing Instrument Mixes in Quality Assurance: The Czech and Slovak Accreditation Commissions in the Era of Mass Higher Education

ERIC Educational Resources Information Center

Kohoutek, Jan

2014-01-01

Utilising insights from policy instrument theory, the article analyses the design, functioning and effects of the tools used by the Czech Accreditation Commission (CAC) and the Slovak Accreditation Commission (SAC) in the 2000s. Aside from programme accreditation, the other tools analysed are: institutional approval, institutional evaluations,…

NASA EEE Parts and Advanced Interconnect Program (AIP)

NASA Technical Reports Server (NTRS)

Gindorf, T.; Garrison, A.

1996-01-01

none given From Program Objectives: I. Accelerate the readiness of new technologies through development of validation, assessment and test method/tools II. Provide NASA Projects infusion paths for emerging technologies III. Provide NASA Projects technology selection, application and validation guidelines for harware and processes IV. Disseminate quality assurance, reliability, validation, tools and availability information to the NASA community.

A patient self-assessment tool for cardiac rehabilitation.

PubMed

Phelan, C; Finnell, M D; Mottla, K A

1989-01-01

A patient self-assessment tool was designed, tested, and implemented to promote cardiac-specific data collection, based on Gordon's Functional Health Patterns, to maximize patient/family involvement in determining a plan of care, and to streamline primary nurses' documentation requirements. Retrospective and concurrent chart reviews provided data for quality assurance monitoring. The results of the monitoring demonstrated that the self-assessment tool markedly improved the patient-specific data base.

Assessing Assessment Quality: Criteria for Quality Assurance in Design of (Peer) Assessment for Learning--A Review of Research Studies

ERIC Educational Resources Information Center

Tillema, Harm; Leenknecht, Martijn; Segers, Mien

2011-01-01

The interest in "assessment for learning" (AfL) has resulted in a search for new modes of assessment that are better aligned to students' learning how to learn. However, with the introduction of new assessment tools, also questions arose with respect to the quality of its measurement. On the one hand, the appropriateness of traditional,…

Taxonomy-Based Approaches to Quality Assurance of Ontologies

PubMed Central

Perl, Yehoshua; Ochs, Christopher

2017-01-01

Ontologies are important components of health information management systems. As such, the quality of their content is of paramount importance. It has been proven to be practical to develop quality assurance (QA) methodologies based on automated identification of sets of concepts expected to have higher likelihood of errors. Four kinds of such sets (called QA-sets) organized around the themes of complex and uncommonly modeled concepts are introduced. A survey of different methodologies based on these QA-sets and the results of applying them to various ontologies are presented. Overall, following these approaches leads to higher QA yields and better utilization of QA personnel. The formulation of additional QA-set methodologies will further enhance the suite of available ontology QA tools. PMID:29158885

Pharmaceutical quality assurance of local private distributors: a secondary analysis in 13 low-income and middle-income countries.

PubMed

Van Assche, Kerlijn; Nebot Giralt, Ariadna; Caudron, Jean Michel; Schiavetti, Benedetta; Pouget, Corinne; Tsoumanis, Achilleas; Meessen, Bruno; Ravinetto, Raffaella

2018-01-01

The rapid globalisation of the pharmaceutical production and distribution has not been supported by harmonisation of regulatory systems worldwide. Thus, the supply systems in low-income and middle-income countries (LMICs) remain exposed to the risk of poor-quality medicines. To contribute to estimating this risk in the private sector in LMICs, we assessed the quality assurance system of a convenient sample of local private pharmaceutical distributors. This descriptive study uses secondary data derived from the audits conducted by the QUAMED group at 60 local private pharmaceutical distributors in 13 LMICs. We assessed the distributors' compliance with good distribution practices (GDP), general quality requirements (GQR) and cold chain management (CCM), based on an evaluation tool inspired by the WHO guidelines 'Model Quality Assurance System (MQAS) for procurement agencies'. Descriptive statistics describe the compliance for the whole sample, for distributors in sub-Saharan Africa (SSA) versus those in non-SSA, and for those in low-income countries (LICs) versus middle-income countries (MICs). Local private pharmaceutical distributors in our sample were non-compliant, very low-compliant or low-compliant for GQR (70%), GDP (60%) and CCM (41%). Only 7/60 showed good to full compliance for at least two criteria. Observed compliance varies by geographical region and by income group: maximum values are higher in non-SSA versus SSA and in MICs versus LICs, while minimum values are the same across different groups. The poor compliance with WHO quality standards observed in our sample indicates a concrete risk that patients in LMICs are exposed to poor-quality or degraded medicines. Significant investments are needed to strengthen the regulatory supervision, including on private pharmaceutical distributors. An adapted standardised evaluation tool inspired by the WHO MQAS would be helpful for self-evaluation, audit and inspection purposes.

The medical autopsy as quality assurance tool in clinical medicine: dreams and realities.

PubMed

van den Tweel, Jan G; Wittekind, Christian

2016-01-01

The purpose of medical autopsy has changed to issues of quality assurance today. In addition, autopsies are considered valuable in medical education, e.g., delivering cases for problem-based learning for students. Many studies underscore the need for autopsies also in the era of technical progress emphasizing the continuing discrepancies between antemortem and post mortem diagnoses. Despite these important tasks, we face a decline of autopsy for several reasons with complex interactions. The role of all persons involved in this decline is evaluated and suggestions for changes are proposed. Last but not least, the future of the autopsy is in the hands of pathology itself.

Use of alumni and employer surveys for internal quality assurance of the DVM program at the University of Montreal.

PubMed

Doucet, Michèle Y; Vrins, André

2010-01-01

Annual alumni and employer surveys, initially designed as outcomes assessment tools, were integrated into a new internal quality assurance strategy to improve the doctor of veterinary medicine program at the University of Montreal's Faculté de Médecine Vétérinaire. Data collected annually from the classes of 2004-2007 indicated that alumni and their employers were generally satisfied with their level of preparation after one year of professional activity. Specific weaknesses were found in non-technical skills such as communication and resource management. These data were used in support of other forms of feedback to guide curricular reform.

Production and quality assurance automation in the Goddard Space Flight Center Flight Dynamics Facility

NASA Technical Reports Server (NTRS)

Chapman, K. B.; Cox, C. M.; Thomas, C. W.; Cuevas, O. O.; Beckman, R. M.

1994-01-01

The Flight Dynamics Facility (FDF) at the NASA Goddard Space Flight Center (GSFC) generates numerous products for NASA-supported spacecraft, including the Tracking and Data Relay Satellites (TDRS's), the Hubble Space Telescope (HST), the Extreme Ultraviolet Explorer (EUVE), and the space shuttle. These products include orbit determination data, acquisition data, event scheduling data, and attitude data. In most cases, product generation involves repetitive execution of many programs. The increasing number of missions supported by the FDF has necessitated the use of automated systems to schedule, execute, and quality assure these products. This automation allows the delivery of accurate products in a timely and cost-efficient manner. To be effective, these systems must automate as many repetitive operations as possible and must be flexible enough to meet changing support requirements. The FDF Orbit Determination Task (ODT) has implemented several systems that automate product generation and quality assurance (QA). These systems include the Orbit Production Automation System (OPAS), the New Enhanced Operations Log (NEOLOG), and the Quality Assurance Automation Software (QA Tool). Implementation of these systems has resulted in a significant reduction in required manpower, elimination of shift work and most weekend support, and improved support quality, while incurring minimal development cost. This paper will present an overview of the concepts used and experiences gained from the implementation of these automation systems.

The quality assurance liaison: Combined technical and quality assurance support

NASA Astrophysics Data System (ADS)

Bolivar, S. L.; Day, J. L.

1993-03-01

The role of the quality assurance liaison, the responsibilities of this position, and the evolutionary changes in duties over the last six years are described. The role of the quality assurance liaison has had a very positive impact on the Los Alamos Yucca Mountain Site Characterization (YW) quality assurance program. Having both technical and quality assurance expertise, the quality assurance liaisons are able to facilitate communications with scientists on quality assurance issues and requirements, thereby generating greater productivity in scientific investigations. The quality assurance liaisons help ensure that the scientific community knows and implements existing requirements, is aware of new or changing regulations, and is able to conduct scientific work within Project requirements. The influence of the role of the quality assurance liaison can be measured by an overall improvement in attitude of the staff regarding quality assurance requirements and improved job performance, as well as a decrease in deficiencies identified during both internal and external audits and surveillances. This has resulted in a more effective implementation of quality assurance requirements.

10 CFR 63.144 - Quality assurance program change.

Code of Federal Regulations, 2013 CFR

2013-01-01

... assurance program information that duplicates language in quality assurance regulatory guides and quality... 10 Energy 2 2013-01-01 2013-01-01 false Quality assurance program change. 63.144 Section 63.144... REPOSITORY AT YUCCA MOUNTAIN, NEVADA Quality Assurance § 63.144 Quality assurance program change. Changes to...

10 CFR 63.144 - Quality assurance program change.

Code of Federal Regulations, 2014 CFR

2014-01-01

... assurance program information that duplicates language in quality assurance regulatory guides and quality... 10 Energy 2 2014-01-01 2014-01-01 false Quality assurance program change. 63.144 Section 63.144... REPOSITORY AT YUCCA MOUNTAIN, NEVADA Quality Assurance § 63.144 Quality assurance program change. Changes to...

10 CFR 63.144 - Quality assurance program change.

Code of Federal Regulations, 2012 CFR

2012-01-01

... assurance program information that duplicates language in quality assurance regulatory guides and quality... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance program change. 63.144 Section 63.144... REPOSITORY AT YUCCA MOUNTAIN, NEVADA Quality Assurance § 63.144 Quality assurance program change. Changes to...

An Alternative Grading Tool for Enhancing Assessment Practice and Quality Assurance in Higher Education

ERIC Educational Resources Information Center

Grainger, Peter; Weir, Katie

2016-01-01

Assessing student learning in university courses is commonly done using a rubric that arranges the assessment criteria and standards descriptors in a matrix style or grid format. This paper introduces an alternative style of grading tool known as the continua model of a guide to making judgements, which arranges assessment criteria based on a…

A simple quality assurance test tool for the visual verification of light and radiation field congruent using electronic portal images device and computed radiography

PubMed Central

2012-01-01

Background The radiation field on most megavoltage radiation therapy units are shown by a light field projected through the collimator by a light source mounted inside the collimator. The light field is traditionally used for patient alignment. Hence it is imperative that the light field is congruent with the radiation field. Method A simple quality assurance tool has been designed for rapid and simple test of the light field and radiation field using electronic portal images device (EPID) or computed radiography (CR). We tested this QA tool using Varian PortalVision and Elekta iViewGT EPID systems and Kodak CR system. Results Both the single and double exposure techniques were evaluated, with double exposure technique providing a better visualization of the light-radiation field markers. The light and radiation congruency could be detected within 1 mm. This will satisfy the American Association of Physicists in Medicine task group report number 142 recommendation of 2 mm tolerance. Conclusion The QA tool can be used with either an EPID or CR to provide a simple and rapid method to verify light and radiation field congruence. PMID:22452821

Technical Note: Development and performance of a software tool for quality assurance of online replanning with a conventional Linac or MR-Linac.

PubMed

Chen, Guang-Pei; Ahunbay, Ergun; Li, X Allen

2016-04-01

To develop an integrated quality assurance (QA) software tool for online replanning capable of efficiently and automatically checking radiation treatment (RT) planning parameters and gross plan quality, verifying treatment plan data transfer from treatment planning system (TPS) to record and verify (R&V) system, performing a secondary monitor unit (MU) calculation with or without a presence of a magnetic field from MR-Linac, and validating the delivery record consistency with the plan. The software tool, named ArtQA, was developed to obtain and compare plan and treatment parameters from both the TPS and the R&V system database. The TPS data are accessed via direct file reading and the R&V data are retrieved via open database connectivity and structured query language. Plan quality is evaluated with both the logical consistency of planning parameters and the achieved dose-volume histograms. Beams in between the TPS and R&V system are matched based on geometry configurations. To consider the effect of a 1.5 T transverse magnetic field from MR-Linac in the secondary MU calculation, a method based on modified Clarkson integration algorithm was developed and tested for a series of clinical situations. ArtQA has been used in their clinic and can quickly detect inconsistencies and deviations in the entire RT planning process. With the use of the ArtQA tool, the efficiency for plan check including plan quality, data transfer, and delivery check can be improved by at least 60%. The newly developed independent MU calculation tool for MR-Linac reduces the difference between the plan and calculated MUs by 10%. The software tool ArtQA can be used to perform a comprehensive QA check from planning to delivery with conventional Linac or MR-Linac and is an essential tool for online replanning where the QA check needs to be performed rapidly.

Technical Note: Development and performance of a software tool for quality assurance of online replanning with a conventional Linac or MR-Linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Guang-Pei, E-mail: gpchen@mcw.edu; Ahunbay, Ergun; Li, X. Allen

Purpose: To develop an integrated quality assurance (QA) software tool for online replanning capable of efficiently and automatically checking radiation treatment (RT) planning parameters and gross plan quality, verifying treatment plan data transfer from treatment planning system (TPS) to record and verify (R&V) system, performing a secondary monitor unit (MU) calculation with or without a presence of a magnetic field from MR-Linac, and validating the delivery record consistency with the plan. Methods: The software tool, named ArtQA, was developed to obtain and compare plan and treatment parameters from both the TPS and the R&V system database. The TPS data aremore » accessed via direct file reading and the R&V data are retrieved via open database connectivity and structured query language. Plan quality is evaluated with both the logical consistency of planning parameters and the achieved dose–volume histograms. Beams in between the TPS and R&V system are matched based on geometry configurations. To consider the effect of a 1.5 T transverse magnetic field from MR-Linac in the secondary MU calculation, a method based on modified Clarkson integration algorithm was developed and tested for a series of clinical situations. Results: ArtQA has been used in their clinic and can quickly detect inconsistencies and deviations in the entire RT planning process. With the use of the ArtQA tool, the efficiency for plan check including plan quality, data transfer, and delivery check can be improved by at least 60%. The newly developed independent MU calculation tool for MR-Linac reduces the difference between the plan and calculated MUs by 10%. Conclusions: The software tool ArtQA can be used to perform a comprehensive QA check from planning to delivery with conventional Linac or MR-Linac and is an essential tool for online replanning where the QA check needs to be performed rapidly.« less

Clustered lot quality assurance sampling: a pragmatic tool for timely assessment of vaccination coverage.

PubMed

Greenland, K; Rondy, M; Chevez, A; Sadozai, N; Gasasira, A; Abanida, E A; Pate, M A; Ronveaux, O; Okayasu, H; Pedalino, B; Pezzoli, L

2011-07-01

To evaluate oral poliovirus vaccine (OPV) coverage of the November 2009 round in five Northern Nigeria states with ongoing wild poliovirus transmission using clustered lot quality assurance sampling (CLQAS). We selected four local government areas in each pre-selected state and sampled six clusters of 10 children in each Local Government Area, defined as the lot area. We used three decision thresholds to classify OPV coverage: 75-90%, 55-70% and 35-50%. A full lot was completed, but we also assessed in retrospect the potential time-saving benefits of stopping sampling when a lot had been classified. We accepted two local government areas (LGAs) with vaccination coverage above 75%. Of the remaining 18 rejected LGAs, 11 also failed to reach 70% coverage, of which four also failed to reach 50%. The average time taken to complete a lot was 10 h. By stopping sampling when a decision was reached, we could have classified lots in 5.3, 7.7 and 7.3 h on average at the 90%, 70% and 50% coverage targets, respectively. Clustered lot quality assurance sampling was feasible and useful to estimate OPV coverage in Northern Nigeria. The multi-threshold approach provided useful information on the variation of IPD vaccination coverage. CLQAS is a very timely tool, allowing corrective actions to be directly taken in insufficiently covered areas. © 2011 Blackwell Publishing Ltd.

48 CFR 246.470 - Government contract quality assurance actions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... quality assurance actions. 246.470 Section 246.470 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.470 Government contract quality assurance actions. ...

The Empower project - a new way of assessing and monitoring test comparability and stability.

PubMed

De Grande, Linde A C; Goossens, Kenneth; Van Uytfanghe, Katleen; Stöckl, Dietmar; Thienpont, Linda M

2015-07-01

Manufacturers and laboratories might benefit from using a modern integrated tool for quality management/assurance. The tool should not be confounded by commutability issues and focus on the intrinsic analytical quality and comparability of assays as performed in routine laboratories. In addition, it should enable monitoring of long-term stability of performance, with the possibility to quasi "real-time" remedial action. Therefore, we developed the "Empower" project. The project comprises four pillars: (i) master comparisons with panels of frozen single-donation samples, (ii) monitoring of patient percentiles and (iii) internal quality control data, and (iv) conceptual and statistical education about analytical quality. In the pillars described here (i and ii), state-of-the-art as well as biologically derived specifications are used. In the 2014 master comparisons survey, 125 laboratories forming 8 peer groups participated. It showed not only good intrinsic analytical quality of assays but also assay biases/non-comparability. Although laboratory performance was mostly satisfactory, sometimes huge between-laboratory differences were observed. In patient percentile monitoring, currently, 100 laboratories participate with 182 devices. Particularly, laboratories with a high daily throughput and low patient population variation show a stable moving median in time with good between-instrument concordance. Shifts/drifts due to lot changes are sometimes revealed. There is evidence that outpatient medians mirror the calibration set-points shown in the master comparisons. The Empower project gives manufacturers and laboratories a realistic view on assay quality/comparability as well as stability of performance and/or the reasons for increased variation. Therefore, it is a modern tool for quality management/assurance toward improved patient care.

Audit of the informed consent process as a part of a clinical research quality assurance program.

PubMed

Lad, Pramod M; Dahl, Rebecca

2014-06-01

Audits of the informed consent process are a key element of a clinical research quality assurance program. A systematic approach to such audits has not been described in the literature. In this paper we describe two components of the audit. The first is the audit of the informed consent document to verify adherence with federal regulations. The second component is comprised of the audit of the informed consent conference, with emphasis on a real time review of the appropriate communication of the key elements of the informed consent. Quality measures may include preparation of an informed consent history log, notes to accompany the informed consent, the use of an informed consent feedback tool, and the use of institutional surveys to assess comprehension of the informed consent process.

Transforming University Education and Quality Assurance for Sustainable Development in Nigeria for a Globalized World

ERIC Educational Resources Information Center

Mamman, F. N.

2013-01-01

Education has been recognized as an important tool for achieving a nation's goals, vision and objectives. The quality of Nigerian universities has been and still is an issue of concern among stakeholders due to the challenges posed by globalization and the need for continued scientific and technological advancement. Over the years, this concern…

48 CFR 846.408 - Single-agency assignments of Government contract quality assurance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of Government contract quality assurance. 846.408 Section 846.408 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 846.408 Single-agency assignments of Government contract quality assurance. ...

College Quality Assurance Assurances. Mendip Papers 020.

ERIC Educational Resources Information Center

Sallis, E.; Hingley, P.

This paper discusses the increasing interest in quality assurance in British education including its measurement and management through the introduction of a quality assurance system. The reasons and benefits of beginning a quality assurance system are discussed, and questions of what constitutes quality, whether it is quality in fact…

Quality assessment tools add value.

PubMed

Paul, L

1996-10-01

The rapid evolution of the health care marketplace can be expected to continue as we move closer to the 21st Century. Externally-imposed pressures for cost reduction will increasingly be accompanied by pressure within health care organizations as risk-sharing reimbursement arrangements become more commonplace. Competitive advantage will be available to those organizations that can demonstrate objective value as defined by the cost-quality equation. The tools an organization chooses to perform quality assessment will be an important factor in its ability to demonstrate such value. Traditional quality assurance will in all likelihood continue, but the extent to which quality improvement activities are adopted by the culture of an organization may determine its ability to provide objective evidence of better health status outcomes.

Telemedicine-based system for quality management and peer review in radiology.

PubMed

Morozov, Sergey; Guseva, Ekaterina; Ledikhova, Natalya; Vladzymyrskyy, Anton; Safronov, Dmitry

2018-06-01

Quality assurance is the key component of modern radiology. A telemedicine-based quality assurance system helps to overcome the "scoring" approach and makes the quality control more accessible and objective. A concept for quality assurance in radiology is developed. Its realization is a set of strategies, actions, and tools. The latter is based on telemedicine-based peer review of 23,199 computed tomography (CT) and magnetic resonance imaging (MRI) images. The conception of the system for quality management in radiology represents a chain of actions: "discrepancies evaluation - routine support - quality improvement activity - discrepancies evaluation". It is realized by an audit methodology, telemedicine, elearning, and other technologies. After a year of systemic telemedicine-based peer reviews, the authors have estimated that clinically significant discrepancies were detected in 6% of all cases, while clinically insignificant ones were found in 19% of cases. Most often, problems appear in musculoskeletal records; 80% of the examinations have diagnostic or technical imperfections. The presence of routine telemedicine support and personalized elearning allowed improving the diagnostics quality. The level of discrepancies has decreased significantly (p < 0.05). The telemedicine-based peer review system allows improving radiology departments' network effectiveness. • "Scoring" approach to radiologists' performance assessment must be changed. • Telemedicine peer review and personalized elearning significantly decrease the number of discrepancies. • Teleradiology allows linking all primary-level hospitals to a common peer review network.

Tool grinding and spark testing

NASA Technical Reports Server (NTRS)

Widener, Edward L.

1993-01-01

The objectives were the following: (1) to revive the neglected art of metal-sparking; (2) to promote quality-assurance in the workplace; (3) to avoid spark-ignited explosions of dusts or volatiles; (4) to facilitate the salvage of scrap metals; and (5) to summarize important references.

Quality assurance software inspections at NASA Ames: Metrics for feedback and modification

NASA Technical Reports Server (NTRS)

Wenneson, G.

1985-01-01

Software inspections are a set of formal technical review procedures held at selected key points during software development in order to find defects in software documents--is described in terms of history, participants, tools, procedures, statistics, and database analysis.

Quality control and quality assurance plan for bridge channel-stability assessments in Massachusetts

USGS Publications Warehouse

Parker, Gene W.; Pinson, Harlow

1993-01-01

A quality control and quality assurance plan has been implemented as part of the Massachusetts bridge scour and channel-stability assessment program. This program is being conducted by the U.S. Geological Survey, Massachusetts-Rhode Island District, in cooperation with the Massachusetts Highway Department. Project personnel training, data-integrity verification, and new data-management technologies are being utilized in the channel-stability assessment process to improve current data-collection and management techniques. An automated data-collection procedure has been implemented to standardize channel-stability assessments on a regular basis within the State. An object-oriented data structure and new image management tools are used to produce a data base enabling management of multiple data object classes. Data will be reviewed by assessors and data base managers before being merged into a master bridge-scour data base, which includes automated data-verification routines.

Quality assurance of medicines supplied to low-income and middle-income countries: poor products in shiny boxes?

PubMed Central

Schiavetti, B; Meessen, B; Pouget, C; Caudron, J M; Marchal, B; Massat, P; Thys, S; Ravinetto, R

2017-01-01

Objective In today's context of globalisation of pharmaceutical production and distribution, international and national procurement agencies play a de facto key role in defining the quality of medicines available in sub-Saharan Africa. We evaluated the compliance of a sample of pharmaceutical distributors active in sub-Saharan Africa with the standards of the WHO guideline ‘Model Quality Assurance System (WHO MQAS) for procurement agencies’, and we investigated factors favouring or hindering the adequate implementation of the guideline. Methods We used mixed-methods methodology to analyse quantitative and qualitative data. The quantitative study consisted of a retrospective secondary analysis of data collected by QUAMED (Quality Medicines for all), a partnership that pleads for universal access to quality-assured medicines. The qualitative survey consisted of formal and informal interviews with key informants. We adopted an embedded multiple-case study design. Findings Our analysis suggests that international distributors based in Europe perform, on average, better than sub-Saharan African distributors. However, some weaknesses are ubiquitous and concern critical processes, such as the initial selection of the products and the ongoing reassessment of their quality. This is due to several different factors: weak regulatory oversight, insufficient human/financial resources, weak negotiating power, limited judicial autonomy and/or lack of institutional commitment to quality. Conclusions Our findings suggest that pharmaceutical distributors active in sub-Saharan Africa generally do not apply stringent criteria for selecting products and suppliers. Therefore, product quality is not consistently assured but depends on the requirements of purchasers. While long-term solutions are awaited, the WHO MQAS guideline should be used as an evaluation and training tool to upgrade current standards. PMID:28589013

Open access tools for quality-assured and efficient data entry in a large, state-wide tobacco survey in India.

PubMed

Shewade, Hemant Deepak; Vidhubala, E; Subramani, Divyaraj Prabhakar; Lal, Pranay; Bhatt, Neelam; Sundaramoorthi, C; Singh, Rana J; Kumar, Ajay M V

2017-01-01

A large state-wide tobacco survey was conducted using modified version of pretested, globally validated Global Adult Tobacco Survey (GATS) questionnaire in 2015-22016 in Tamil Nadu, India. Due to resource constrains, data collection was carrid out using paper-based questionnaires (unlike the GATS-India, 2009-2010, which used hand-held computer devices) while data entry was done using open access tools. The objective of this paper is to describe the process of data entry and assess its quality assurance and efficiency. In EpiData language, a variable is referred to as 'field' and a questionnaire (set of fields) as 'record'. EpiData software was used for double data entry with adequate checks followed by validation. Teamviewer was used for remote training and trouble shooting. The EpiData databases (one each for each district and each zone in Chennai city) were housed in shared Dropbox folders, which enabled secure sharing of files and automatic back-up. Each database for a district/zone had separate file for data entry of household level and individual level questionnaire. Of 32,945 households, there were 111,363 individuals aged ≥15 years. The average proportion of records with data entry errors for a district/zone in household level and individual level file was 4% and 24%, respectively. These are the errors that would have gone unnoticed if single entry was used. The median (inter-quartile range) time taken for double data entry for a single household level and individual level questionnaire was 30 (24, 40) s and 86 (64, 126) s, respectively. Efficient and quality-assured near-real-time data entry in a large sub-national tobacco survey was performed using innovative, resource-efficient use of open access tools.

Some aspects of precise laser machining - Part 2: Experimental

NASA Astrophysics Data System (ADS)

Grabowski, Marcin; Wyszynski, Dominik; Ostrowski, Robert

2018-05-01

The paper describes the role of laser beam polarization on quality of laser beam machined cutting tool edge. In micromachining the preparation of the cutting tools in play a key role on dimensional accuracy, sharpness and the quality of the cutting edges. In order to assure quality and dimensional accuracy of the cutting tool edge it is necessary to apply laser polarization control. In the research diode pumped Nd:YAG 532nm pulse laser was applied. Laser beam polarization used in the research was linear (horizontal, vertical). The goal of the carried out research was to describe impact of laser beam polarization on efficiency of the cutting process and quality of machined parts (edge, surface) made of polycrystalline diamond (PCD) and cubic boron nitride (cBN). Application of precise cutting tool in micromachining has significant impact on the minimum uncut chip thickness and quality of the parts. The research was carried within the INNOLOT program funded by the National Centre for Research and Development.

10 CFR 72.140 - Quality assurance requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Quality assurance requirements. 72.140 Section 72.140... SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality Assurance § 72.140 Quality assurance requirements. (a) Purpose. This subpart describes quality assurance...

10 CFR 72.140 - Quality assurance requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance requirements. 72.140 Section 72.140... SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality Assurance § 72.140 Quality assurance requirements. (a) Purpose. This subpart describes quality assurance...

10 CFR 72.140 - Quality assurance requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance requirements. 72.140 Section 72.140... SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality Assurance § 72.140 Quality assurance requirements. (a) Purpose. This subpart describes quality assurance...

10 CFR 72.140 - Quality assurance requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance requirements. 72.140 Section 72.140... SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality Assurance § 72.140 Quality assurance requirements. (a) Purpose. This subpart describes quality assurance...

10 CFR 72.140 - Quality assurance requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Quality assurance requirements. 72.140 Section 72.140... SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality Assurance § 72.140 Quality assurance requirements. (a) Purpose. This subpart describes quality assurance...

23 CFR 637.207 - Quality assurance program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Quality assurance program. 637.207 Section 637.207... CONSTRUCTION INSPECTION AND APPROVAL Quality Assurance Procedures for Construction § 637.207 Quality assurance program. (a) Each STD's quality assurance program shall provide for an acceptance program and an...

10 CFR 71.37 - Quality assurance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance. 71.37 Section 71.37 Energy NUCLEAR... Package Approval § 71.37 Quality assurance. (a) The applicant shall describe the quality assurance program... quality assurance program that are applicable to the particular package design under consideration...

10 CFR 71.103 - Quality assurance organization.

Code of Federal Regulations, 2012 CFR

2012-01-01

... contractors, agents, or consultants, the work of establishing and executing the quality assurance program, or... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance organization. 71.103 Section 71.103... Quality Assurance § 71.103 Quality assurance organization. (a) The licensee, 2 certificate holder, and...

10 CFR 71.103 - Quality assurance organization.

Code of Federal Regulations, 2014 CFR

2014-01-01

... contractors, agents, or consultants, the work of establishing and executing the quality assurance program, or... 10 Energy 2 2014-01-01 2014-01-01 false Quality assurance organization. 71.103 Section 71.103... Quality Assurance § 71.103 Quality assurance organization. (a) The licensee, 2 certificate holder, and...

10 CFR 71.103 - Quality assurance organization.

Code of Federal Regulations, 2013 CFR

2013-01-01

... contractors, agents, or consultants, the work of establishing and executing the quality assurance program, or... 10 Energy 2 2013-01-01 2013-01-01 false Quality assurance organization. 71.103 Section 71.103... Quality Assurance § 71.103 Quality assurance organization. (a) The licensee, 2 certificate holder, and...

Measuring Outcomes in Children's Services.

ERIC Educational Resources Information Center

Christner, Anne Marshall, Ed.

Outcomes evaluation can provide program managers and clinical directors in child welfare, juvenile justice, child mental health, and child protective services the necessary tools for program quality assurance and accountability. This guide describes the outcomes evaluation process and provides a summary of articles and reports detailing current…

Thermal integrity profiling for augered cast-in-place piles - implementation plan.

DOT National Transportation Integrated Search

2017-08-01

This study was the second in a two-part research program focused on assessing the feasibility of using thermal integrity profiling (TIP) as a quality assurance tool for Augered Cast-In-Place (ACIP) piles. This was made possible by coordinating with t...

Designing and Managing Your Digital Library.

ERIC Educational Resources Information Center

Guenther, Kim

2000-01-01

Discusses digital libraries and Web site design issues. Highlights include accessibility issues, including standards, markup languages like HTML and XML, and metadata; building virtual communities; the use of Web portals for customized delivery of information; quality assurance tools, including data mining; and determining user needs, including…

SU-F-T-32: Evaluation of the Performance of a Multiple-Array-Diode Detector for Quality Assurance Tests in High-Dose-Rate Brachytherapy with Ir-192 Source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harpool, K; De La Fuente Herman, T; Ahmad, S

Purpose: To evaluate the performance of a two-dimensional (2D) array-diode- detector for geometric and dosimetric quality assurance (QA) tests of high-dose-rate (HDR) brachytherapy with an Ir-192-source. Methods: A phantom setup was designed that encapsulated a two-dimensional (2D) array-diode-detector (MapCheck2) and a catheter for the HDR brachytherapy Ir-192 source. This setup was used to perform both geometric and dosimetric quality assurance for the HDR-Ir192 source. The geometric tests included: (a) measurement of the position of the source and (b) spacing between different dwell positions. The dosimteric tests include: (a) linearity of output with time, (b) end effect and (c) relative dosemore » verification. The 2D-dose distribution measured with MapCheck2 was used to perform the previous tests. The results of MapCheck2 were compared with the corresponding quality assurance testes performed with Gafchromic-film and well-ionization-chamber. Results: The position of the source and the spacing between different dwell-positions were reproducible within 1 mm accuracy by measuring the position of maximal dose using MapCheck2 in contrast to the film which showed a blurred image of the dwell positions due to limited film sensitivity to irradiation. The linearity of the dose with dwell times measured from MapCheck2 was superior to the linearity measured with ionization chamber due to higher signal-to-noise ratio of the diode readings. MapCheck2 provided more accurate measurement of the end effect with uncertainty < 1.5% in comparison with the ionization chamber uncertainty of 3%. Although MapCheck2 did not provide absolute calibration dosimeter for the activity of the source, it provided accurate tool for relative dose verification in HDR-brachytherapy. Conclusion: The 2D-array-diode-detector provides a practical, compact and accurate tool to perform quality assurance for HDR-brachytherapy with an Ir-192 source. The diodes in MapCheck2 have high radiation sensitivity and linearity that is superior to Gafchromic-films and ionization chamber used for geometric and dosimetric QA in HDR-brachytherapy, respectively.« less

Using the scanning electron microscope on the production line to assure quality semiconductors

NASA Technical Reports Server (NTRS)

Adolphsen, J. W.; Anstead, R. J.

1972-01-01

The use of the scanning electron microscope to detect metallization defects introduced during batch processing of semiconductor devices is discussed. A method of determining metallization integrity was developed which culminates in a procurement specification using the scanning microscope on the production line as a quality control tool. Batch process control of the metallization operation is monitored early in the manufacturing cycle.

48 CFR 37.604 - Quality assurance surveillance plans.

Code of Federal Regulations, 2013 CFR

2013-10-01

... surveillance plans. 37.604 Section 37.604 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... assurance surveillance plans. Requirements for quality assurance and quality assurance surveillance plans are in Subpart 46.4. The Government may either prepare the quality assurance surveillance plan or...

48 CFR 37.604 - Quality assurance surveillance plans.

Code of Federal Regulations, 2014 CFR

2014-10-01

... surveillance plans. 37.604 Section 37.604 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... assurance surveillance plans. Requirements for quality assurance and quality assurance surveillance plans are in Subpart 46.4. The Government may either prepare the quality assurance surveillance plan or...

48 CFR 37.604 - Quality assurance surveillance plans.

Code of Federal Regulations, 2010 CFR

2010-10-01

... surveillance plans. 37.604 Section 37.604 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... assurance surveillance plans. Requirements for quality assurance and quality assurance surveillance plans are in Subpart 46.4. The Government may either prepare the quality assurance surveillance plan or...

48 CFR 37.604 - Quality assurance surveillance plans.

Code of Federal Regulations, 2012 CFR

2012-10-01

... surveillance plans. 37.604 Section 37.604 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... assurance surveillance plans. Requirements for quality assurance and quality assurance surveillance plans are in Subpart 46.4. The Government may either prepare the quality assurance surveillance plan or...

48 CFR 37.604 - Quality assurance surveillance plans.

Code of Federal Regulations, 2011 CFR

2011-10-01

... surveillance plans. 37.604 Section 37.604 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... assurance surveillance plans. Requirements for quality assurance and quality assurance surveillance plans are in Subpart 46.4. The Government may either prepare the quality assurance surveillance plan or...

15 CFR 996.31 - Termination of the Quality Assurance Program.

Code of Federal Regulations, 2011 CFR

2011-01-01

... ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES Other Quality Assurance Program Matters § 996.31 Termination of the Quality Assurance Program. (a) NOAA reserves the right to terminate the...

15 CFR 996.31 - Termination of the Quality Assurance Program.

Code of Federal Regulations, 2013 CFR

2013-01-01

... ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES Other Quality Assurance Program Matters § 996.31 Termination of the Quality Assurance Program. (a) NOAA reserves the right to terminate the...

15 CFR 996.31 - Termination of the Quality Assurance Program.

Code of Federal Regulations, 2014 CFR

2014-01-01

... ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES Other Quality Assurance Program Matters § 996.31 Termination of the Quality Assurance Program. (a) NOAA reserves the right to terminate the...

15 CFR 996.31 - Termination of the Quality Assurance Program.

Code of Federal Regulations, 2012 CFR

2012-01-01

... ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES Other Quality Assurance Program Matters § 996.31 Termination of the Quality Assurance Program. (a) NOAA reserves the right to terminate the...

[Certification of an ambulatory gastroenterologic service fulfilling ISO Law 9001--criteria and national guidelines of the Gastroenterologic Association].

PubMed

Birkner, B

2000-09-01

The objectives of certification and accreditation are the deployment and examination of quality improvement measures in health care services. The quality management system of the ISO 9001 is created to install measures and tools leading to assured and improved quality in health care. Only some experiences with certification fulfilling ISO 9001 criteria exist in the German health care system. Evidence-based clinical guidelines can serve as references for the development of standards in quality measurement. Only little data exists on the implementation strategy of guidelines and evaluation, respectively. A pilot quality management system in consistence with ISO 9001 criteria was developed for ambulatory, gastroenterological services. National guidelines of the German Society of Gastroenterology and Metabolism and the recommendations of the German Association of Physicians for quality assurance of gastrointestinal endoscopy were included in the documentation and internal auditing. This pilot quality management system is suitable for the first steps in the introduction of quality management in ambulatory health care. This system shows validity for accreditation and certification of gastrointestinal health care units as well.

Pharmaceutical quality assurance of local private distributors: a secondary analysis in 13 low-income and middle-income countries

PubMed Central

Caudron, Jean Michel; Schiavetti, Benedetta; Pouget, Corinne; Tsoumanis, Achilleas; Meessen, Bruno; Ravinetto, Raffaella

2018-01-01

Introduction The rapid globalisation of the pharmaceutical production and distribution has not been supported by harmonisation of regulatory systems worldwide. Thus, the supply systems in low-income and middle-income countries (LMICs) remain exposed to the risk of poor-quality medicines. To contribute to estimating this risk in the private sector in LMICs, we assessed the quality assurance system of a convenient sample of local private pharmaceutical distributors. Methods This descriptive study uses secondary data derived from the audits conducted by the QUAMED group at 60 local private pharmaceutical distributors in 13 LMICs. We assessed the distributors’ compliance with good distribution practices (GDP), general quality requirements (GQR) and cold chain management (CCM), based on an evaluation tool inspired by the WHO guidelines ’Model Quality Assurance System (MQAS) for procurement agencies'. Descriptive statistics describe the compliance for the whole sample, for distributors in sub-Saharan Africa (SSA) versus those in non-SSA, and for those in low-income countries (LICs) versus middle-income countries (MICs). Results Local private pharmaceutical distributors in our sample were non-compliant, very low-compliant or low-compliant for GQR (70%), GDP (60%) and CCM (41%). Only 7/60 showed good to full compliance for at least two criteria. Observed compliance varies by geographical region and by income group: maximum values are higher in non-SSA versus SSA and in MICs versus LICs, while minimum values are the same across different groups. Conclusion The poor compliance with WHO quality standards observed in our sample indicates a concrete risk that patients in LMICs are exposed to poor-quality or degraded medicines. Significant investments are needed to strengthen the regulatory supervision, including on private pharmaceutical distributors. An adapted standardised evaluation tool inspired by the WHO MQAS would be helpful for self-evaluation, audit and inspection purposes. PMID:29915671

Machine tools and fixtures: A compilation

NASA Technical Reports Server (NTRS)

1971-01-01

As part of NASA's Technology Utilizations Program, a compilation was made of technological developments regarding machine tools, jigs, and fixtures that have been produced, modified, or adapted to meet requirements of the aerospace program. The compilation is divided into three sections that include: (1) a variety of machine tool applications that offer easier and more efficient production techniques; (2) methods, techniques, and hardware that aid in the setup, alignment, and control of machines and machine tools to further quality assurance in finished products: and (3) jigs, fixtures, and adapters that are ancillary to basic machine tools and aid in realizing their greatest potential.

10 CFR 63.141 - Scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... its structures, systems, or components will perform satisfactorily in service. Quality assurance includes quality control, which comprises those quality assurance actions related to the physical..., NEVADA Quality Assurance § 63.141 Scope. As used in this part, quality assurance comprises all those...

Rapid assessment of antimicrobial resistance prevalence using a Lot Quality Assurance sampling approach.

PubMed

van Leth, Frank; den Heijer, Casper; Beerepoot, Mariëlle; Stobberingh, Ellen; Geerlings, Suzanne; Schultsz, Constance

2017-04-01

Increasing antimicrobial resistance (AMR) requires rapid surveillance tools, such as Lot Quality Assurance Sampling (LQAS). LQAS classifies AMR as high or low based on set parameters. We compared classifications with the underlying true AMR prevalence using data on 1335 Escherichia coli isolates from surveys of community-acquired urinary tract infection in women, by assessing operating curves, sensitivity and specificity. Sensitivity and specificity of any set of LQAS parameters was above 99% and between 79 and 90%, respectively. Operating curves showed high concordance of the LQAS classification with true AMR prevalence estimates. LQAS-based AMR surveillance is a feasible approach that provides timely and locally relevant estimates, and the necessary information to formulate and evaluate guidelines for empirical treatment.

Figures of Merit for Aeronautics Programs and Addition to NASA LARC Fire Station

NASA Technical Reports Server (NTRS)

Harper, Belinda M.

1995-01-01

This report accounts details of two research projects for the Langley Aerospace Research Summer Scholars (LARSS) program. The first project, with the Office of Mission Assurance, involved subjectively predicting the probable success of two aeronautics programs by means of a tool called a Figure of Merit. The figure of merit bases program success on the quality and reliability of the following factors: parts, complexity of research, quality programs, hazards elimination, and single point failures elimination. The second project, for the Office of Safety and Facilities Assurance, required planning, layouts, and source seeking for an addition to the fire house. Forecasted changes in facility layout necessitate this addition which will serve as housing for the fire fighters.

Thoughts on Internal and External Quality Assurance

ERIC Educational Resources Information Center

Zhang, Jianxin

2012-01-01

Quality assurance of higher education is made up of two parts: internal quality assurance (IQA) and external quality assurance (EQA). Both belong to a union of the coexistence and balance of yin and yang. But in reality there exists a paradox of "confusion of quality assurance (QA) subject consciousness, singularity of social QA and lack of QA…

The hidden KPI registration accuracy.

PubMed

Shorrosh, Paul

2011-09-01

Determining the registration accuracy rate is fundamental to improving revenue cycle key performance indicators. A registration quality assurance (QA) process allows errors to be corrected before bills are sent and helps registrars learn from their mistakes. Tools are available to help patient access staff who perform registration QA manually.

The quality management journey: the progress of health facilities in Australia.

PubMed

Carr, B J

1994-12-01

Many facilities in Australia have taken the Total Quality Management (TQM) step. The objective of this study was to examine progress of adopted formal quality systems in health. Sixty per cent of organizations surveyed have adopted formal systems. Of these, Deming adherents are the most common, followed by eclectic choices. Only 35% considered the quality transition as reasonably easy. There was no relationship between accreditation and formal quality systems identified. The most common improvement techniques were: flow charts, histograms, and cause and effect diagrams. Quality practitioners are happy to use several tools exceptionally well rather than have many tools at their disposal. The greatest impediment to the adoption of quality was the lack of top management support. This study did not support the view that clinicians are not readily actively supporting quality initiatives. Total Quality Management is not a mature concept; however, Chief Executive Officers are assured that rewards will be realized over time.

Quality Assurance of Cancer Study Common Data Elements Using A Post-Coordination Approach

PubMed Central

Jiang, Guoqian; Solbrig, Harold R.; Prud’hommeaux, Eric; Tao, Cui; Weng, Chunhua; Chute, Christopher G.

2015-01-01

Domain-specific common data elements (CDEs) are emerging as an effective approach to standards-based clinical research data storage and retrieval. A limiting factor, however, is the lack of robust automated quality assurance (QA) tools for the CDEs in clinical study domains. The objectives of the present study are to prototype and evaluate a QA tool for the study of cancer CDEs using a post-coordination approach. The study starts by integrating the NCI caDSR CDEs and The Cancer Genome Atlas (TCGA) data dictionaries in a single Resource Description Framework (RDF) data store. We designed a compositional expression pattern based on the Data Element Concept model structure informed by ISO/IEC 11179, and developed a transformation tool that converts the pattern-based compositional expressions into the Web Ontology Language (OWL) syntax. Invoking reasoning and explanation services, we tested the system utilizing the CDEs extracted from two TCGA clinical cancer study domains. The system could automatically identify duplicate CDEs, and detect CDE modeling errors. In conclusion, compositional expressions not only enable reuse of existing ontology codes to define new domain concepts, but also provide an automated mechanism for QA of terminological annotations for CDEs. PMID:26958201

SU-F-T-459: ArcCHECK Machine QA : Highly Efficient Quality Assurance Tool for VMAT, SRS & SBRT Linear Accelerator Delivery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mhatre, V; Patwe, P; Dandekar, P

Purpose: Quality assurance (QA) of complex linear accelerators is critical and highly time consuming. ArcCHECK Machine QA tool is used to test geometric and delivery aspects of linear accelerator. In this study we evaluated the performance of this tool. Methods: Machine QA feature allows user to perform quality assurance tests using ArcCHECK phantom. Following tests were performed 1) Gantry Speed 2) Gantry Rotation 3) Gantry Angle 4)MLC/Collimator QA 5)Beam Profile Flatness & Symmetry. Data was collected on trueBEAM stX machine for 6 MV for a period of one year. The Gantry QA test allows to view errors in gantry angle,more » rotation & assess how accurately the gantry moves around the isocentre. The MLC/Collimator QA tool is used to analyze & locate the differences between leaf bank & jaw position of linac. The flatness & Symmetry test quantifies beam flatness & symmetry in IEC-y & x direction. The Gantry & Flatness/Symmetry test can be performed for static & dynamic delivery. Results: The Gantry speed was 3.9 deg/sec with speed maximum deviation around 0.3 deg/sec. The Gantry Isocentre for arc delivery was 0.9mm & static delivery was 0.4mm. The maximum percent positive & negative difference was found to be 1.9 % & – 0.25 % & maximum distance positive & negative diff was 0.4mm & – 0.3 mm for MLC/Collimator QA. The Flatness for Arc delivery was 1.8 % & Symmetry for Y was 0.8 % & X was 1.8 %. The Flatness for gantry 0°,270°,90° & 180° was 1.75,1.9,1.8 & 1.6% respectively & Symmetry for X & Y was 0.8,0.6% for 0°, 0.6,0.7% for 270°, 0.6,1% for 90° & 0.6,0.7% for 180°. Conclusion: ArcCHECK Machine QA is an useful tool for QA of Modern linear accelerators as it tests both geometric & delivery aspects. This is very important for VMAT, SRS & SBRT treatments.« less

222-S Laboratory Quality Assurance Plan. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meznarich, H.K.

1995-07-31

This Quality Assurance Plan provides,quality assurance (QA) guidance, regulatory QA requirements (e.g., 10 CFR 830.120), and quality control (QC) specifications for analytical service. This document follows the U.S Department of Energy (DOE) issued Hanford Analytical Services Quality Assurance Plan (HASQAP). In addition, this document meets the objectives of the Quality Assurance Program provided in the WHC-CM-4-2, Section 2.1. Quality assurance elements required in the Guidelines and Specifications for Preparing Quality Assurance Program Plans (QAMS-004) and Interim Guidelines and Specifications for Preparing Quality Assurance Project Plans (QAMS-005) from the US Environmental Protection Agency (EPA) are covered throughout this document. A qualitymore » assurance index is provided in the Appendix A. This document also provides and/or identifies the procedural information that governs laboratory operations. The personnel of the 222-S Laboratory and the Standards Laboratory including managers, analysts, QA/QC staff, auditors, and support staff shall use this document as guidance and instructions for their operational and quality assurance activities. Other organizations that conduct activities described in this document for the 222-S Laboratory shall follow this QA/QC document.« less

Monitoring Quality Across Home Visiting Models: A Field Test of Michigan's Home Visiting Quality Assurance System.

PubMed

Heany, Julia; Torres, Jennifer; Zagar, Cynthia; Kostelec, Tiffany

2018-06-05

Introduction In order to achieve the positive outcomes with parents and children demonstrated by many home visiting models, home visiting services must be well implemented. The Michigan Home Visiting Initiative developed a tool and procedure for monitoring implementation quality across models referred to as Michigan's Home Visiting Quality Assurance System (MHVQAS). This study field tested the MHVQAS. This article focuses on one of the study's evaluation questions: Can the MHVQAS be applied across models? Methods Eight local implementing agencies (LIAs) from four home visiting models (Healthy Families America, Early Head Start-Home Based, Parents as Teachers, Maternal Infant Health Program) and five reviewers participated in the study by completing site visits, tracking their time and costs, and completing surveys about the process. LIAs also submitted their most recent review by their model developer. The researchers conducted participant observation of the review process. Results Ratings on the MHVQAS were not significantly different between models. There were some differences in interrater reliability and perceived reliability between models. There were no significant differences between models in perceived validity, satisfaction with the review process, or cost to participate. Observational data suggested that cross-model applicability could be improved by assisting sites in relating the requirements of the tool to the specifics of their model. Discussion The MHVQAS shows promise as a tool and process to monitor implementation quality of home visiting services across models. The results of the study will be used to make improvements before the MHVQAS is used in practice.

48 CFR 46.401 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

....401 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.401 General. (a) Government contract quality assurance... conform to contract requirements. Quality assurance surveillance plans should be prepared in conjunction...

48 CFR 46.401 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

....401 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.401 General. (a) Government contract quality assurance... conform to contract requirements. Quality assurance surveillance plans should be prepared in conjunction...

48 CFR 46.401 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

....401 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.401 General. (a) Government contract quality assurance... conform to contract requirements. Quality assurance surveillance plans should be prepared in conjunction...

48 CFR 46.401 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

....401 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.401 General. (a) Government contract quality assurance... conform to contract requirements. Quality assurance surveillance plans should be prepared in conjunction...

48 CFR 46.401 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

....401 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.401 General. (a) Government contract quality assurance... conform to contract requirements. Quality assurance surveillance plans should be prepared in conjunction...

MoniQA: a general approach to monitor quality assurance

NASA Astrophysics Data System (ADS)

Jacobs, J.; Deprez, T.; Marchal, G.; Bosmans, H.

2006-03-01

MoniQA ("Monitor Quality Assurance") is a new, non-commercial, independent quality assurance software application developed in our medical physics team. It is a complete Java TM - based modular environment for the evaluation of radiological viewing devices and it thus fits in the global quality assurance network of our (film less) radiology department. The purpose of the software tool is to guide the medical physicist through an acceptance protocol and the radiologist through a constancy check protocol by presentation of the necessary test patterns and by automated data collection. Data are then sent to a central management system for further analysis. At the moment more than 55 patterns have been implemented, which can be grouped in schemes to implement protocols (i.e. AAPMtg18, DIN and EUREF). Some test patterns are dynamically created and 'drawn' on the viewing device with random parameters as is the case in a recently proposed new pattern for constancy testing. The software is installed on 35 diagnostic stations (70 monitors) in a film less radiology department. Learning time was very limited. A constancy check -with the new pattern that assesses luminance decrease, resolution problems and geometric distortion- takes only 2 minutes and 28 seconds per monitor. The modular approach of the software allows the evaluation of new or emerging test patterns. We will report on the software and its usability: practicality of the constancy check tests in our hospital and on the results from acceptance tests of viewing stations for digital mammography.

40 CFR 125.62 - Attainment or maintenance of water quality which assures protection of public water supplies...

Code of Federal Regulations, 2011 CFR

2011-07-01

...) water quality criteria shall be based on the following: (i) For aquatic life criteria: The pollutant... quality which assures protection of public water supplies; assures the protection and propagation of a... maintenance of water quality which assures protection of public water supplies; assures the protection and...

40 CFR 125.62 - Attainment or maintenance of water quality which assures protection of public water supplies...

Code of Federal Regulations, 2012 CFR

2012-07-01

...) water quality criteria shall be based on the following: (i) For aquatic life criteria: The pollutant... quality which assures protection of public water supplies; assures the protection and propagation of a... maintenance of water quality which assures protection of public water supplies; assures the protection and...

40 CFR 125.62 - Attainment or maintenance of water quality which assures protection of public water supplies...

Code of Federal Regulations, 2014 CFR

2014-07-01

...) water quality criteria shall be based on the following: (i) For aquatic life criteria: The pollutant... quality which assures protection of public water supplies; assures the protection and propagation of a... maintenance of water quality which assures protection of public water supplies; assures the protection and...

40 CFR 125.62 - Attainment or maintenance of water quality which assures protection of public water supplies...

Code of Federal Regulations, 2013 CFR

2013-07-01

...) water quality criteria shall be based on the following: (i) For aquatic life criteria: The pollutant... quality which assures protection of public water supplies; assures the protection and propagation of a... maintenance of water quality which assures protection of public water supplies; assures the protection and...

40 CFR 125.62 - Attainment or maintenance of water quality which assures protection of public water supplies...

Code of Federal Regulations, 2010 CFR

2010-07-01

...) water quality criteria shall be based on the following: (i) For aquatic life criteria: The pollutant... quality which assures protection of public water supplies; assures the protection and propagation of a... maintenance of water quality which assures protection of public water supplies; assures the protection and...

AN AUTOMATED SYSTEM FOR PRODUCING UNIFORM SURFACE DEPOSITS OF DRY PARTICLES

EPA Science Inventory

A laboratory system has been constructed that uniformly deposits dry particles onto any type of test surface. Devised as a quality assurance tool for the purpose of evaluating surface sampling methods for lead, it also may be used to generate test surfaces for any contaminant ...

Quality Assurance Decisions with Air Models: A Case Study of ImputatIon of Missing Input Data Using EPA's Multi-Layer Model

EPA Science Inventory

Abstract Environmental models are frequently used within regulatory and policy frameworks to estimate environmental metrics that are difficult or impossible to physically measure. As important decision tools, the uncertainty associated with the model outputs should impact their ...

Curriculum Model for Medical Technology: Lessons from International Benchmarking

ERIC Educational Resources Information Center

Pring-Valdez, Anacleta

2012-01-01

Curriculum is a crucial component of any educational process. Curriculum development and instructional management serve as effective tools for meeting the present and future needs of the local and national communities. In trying to strengthen the quality assurance system in Philippine higher education, institutions of higher learning were mandated…

A COMPUTER-CONTROLLED SYSTEM FOR GENERATING UNIFORM SURFACE DEPOSITS TO STUDY THE TRANSPORT OF PARTICULATE MATTER

EPA Science Inventory

Improved methods for measuring and assessing microenvironmental exposure in individuals are needed. How human activities affect particulate matter in the personal cloud is poorly understood. A quality assurance tool to aid the study of particle transport mechanisms (e.g., re-en...

A Multi-Objective Method to Align Human Resource Allocation with University Strategy

ERIC Educational Resources Information Center

Bouillard, Philippe

2016-01-01

Universities are currently under considerable pressure to reach their stakeholders' expectations. Management tools that use strategic plans, key performance indicators and quality assurance methods are increasingly deployed. This paper aims to demonstrate how resource allocation can be aligned with institutional strategic plans with a very simple…

29 CFR 29.6 - Program performance standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... apprenticeship programs. (1) The tools and factors to be used must include, but are not limited to: (i) Quality assurance assessments; (ii) Equal Employment Opportunity (EEO) Compliance Reviews; and (iii) Completion... 29 Labor 1 2010-07-01 2010-07-01 true Program performance standards. 29.6 Section 29.6 Labor...

Proceedings of Tenth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1985-01-01

Papers are presented on the following topics: measurement of software technology, recent studies of the Software Engineering Lab, software management tools, expert systems, error seeding as a program validation technique, software quality assurance, software engineering environments (including knowledge-based environments), the Distributed Computing Design System, and various Ada experiments.

Application of reiteration of Hankel singular value decomposition in quality control

NASA Astrophysics Data System (ADS)

Staniszewski, Michał; Skorupa, Agnieszka; Boguszewicz, Łukasz; Michalczuk, Agnieszka; Wereszczyński, Kamil; Wicher, Magdalena; Konopka, Marek; Sokół, Maria; Polański, Andrzej

2017-07-01

Medical centres are obliged to store past medical records, including the results of quality assurance (QA) tests of the medical equipment, which is especially useful in checking reproducibility of medical devices and procedures. Analysis of multivariate time series is an important part of quality control of NMR data. In this work we proposean anomaly detection tool based on Reiteration of Hankel Singular Value Decomposition method. The presented method was compared with external software and authors obtained comparable results.

Inspection Tools

NASA Astrophysics Data System (ADS)

1989-01-01

A "NASA Tech Briefs" article describing an inspection tool and technique known as Optically Stimulated Electron Emission (OSEE) led to the formation of Photo Acoustic Technology, Inc. (PAT). PAT produces sensors and scanning systems which assure surface cleanliness prior to bonding, coating, painting, etc. The company's OP1000 series realtime pre-processing detection capability assures 100 percent surface quality testing. The technique involves brief exposure of the inspection surface to ultraviolet radiation. The energy interacts with the surface layer, causing free electrons to be emitted from the surface to be picked up by the detector. When contamination is present, it interferes with the electron flow in proportion to the thickness of the contaminant layer enabling measurement by system signal output. OP1000 systems operate in conventional atmospheres on all types of material and detect both organic and inorganic contamination.

Flight Dynamics Mission Support and Quality Assurance Process

NASA Technical Reports Server (NTRS)

Oh, InHwan

1996-01-01

This paper summarizes the method of the Computer Sciences Corporation Flight Dynamics Operation (FDO) quality assurance approach to support the National Aeronautics and Space Administration Goddard Space Flight Center Flight Dynamics Support Branch. Historically, a strong need has existed for developing systematic quality assurance using methods that account for the unique nature and environment of satellite Flight Dynamics mission support. Over the past few years FDO has developed and implemented proactive quality assurance processes applied to each of the six phases of the Flight Dynamics mission support life cycle: systems and operations concept, system requirements and specifications, software development support, operations planing and training, launch support, and on-orbit mission operations. Rather than performing quality assurance as a final step after work is completed, quality assurance has been built in as work progresses in the form of process assurance. Process assurance activities occur throughout the Flight Dynamics mission support life cycle. The FDO Product Assurance Office developed process checklists for prephase process reviews, mission team orientations, in-progress reviews, and end-of-phase audits. This paper will outline the evolving history of FDO quality assurance approaches, discuss the tailoring of Computer Science Corporations's process assurance cycle procedures, describe some of the quality assurance approaches that have been or are being developed, and present some of the successful results.

Internal Quality Assurance--Enhancing Quality Culture. ENQA Workshop Report 16

ERIC Educational Resources Information Center

ENQA (European Association for Quality Assurance in Higher Education), 2010

2010-01-01

The European Association for Quality Assurance in Higher Education (ENQA), in cooperation with the Quality Assurance Agency (QAA, UK), organised a seminar on theme "Internal Quality Assurance--Enhancing quality culture" which was held on 8-9 June, 2010 in London, United Kingdom. The seminar marked the fourth annual meeting of the ENQA…

48 CFR 246.401 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.401 General. The requirement for a quality assurance surveillance plan shall be addressed and documented in the contract file... services, the contracting officer should prepare a quality assurance surveillance plan to facilitate...

78 FR 7816 - Quality Assurance Program Requirements (Operations)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-04

... NUCLEAR REGULATORY COMMISSION [NRC-2013-0021] Quality Assurance Program Requirements (Operations...), DG-1300, ``Quality Assurance Program Requirements (Operations).'' DATES: Submit comments by April 1... CFR Part 50, Appendix B, ``Quality Assurance Criteria for Nuclear power Plants and Fuel Reprocessing...

SU-E-T-186: Cloud-Based Quality Assurance Application for Linear Accelerator Commissioning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rogers, J

2015-06-15

Purpose: To identify anomalies and safety issues during data collection and modeling for treatment planning systems Methods: A cloud-based quality assurance system (AQUIRE - Automated QUalIty REassurance) has been developed to allow the uploading and analysis of beam data aquired during the treatment planning system commissioning process. In addition to comparing and aggregating measured data, tools have also been developed to extract dose from the treatment planning system for end-to-end testing. A gamma index is perfomed on the data to give a dose difference and distance-to-agreement for validation that a beam model is generating plans consistent with the beam datamore » collection. Results: Over 20 linear accelerators have been commissioning using this platform, and a variety of errors and potential saftey issues have been caught through the validation process. For example, the gamma index of 2% dose, 2mm DTA is quite sufficient to see curves not corrected for effective point of measurement. Also, data imported into the database is analyzed against an aggregate of similar linear accelerators to show data points that are outliers. The resulting curves in the database exhibit a very small standard deviation and imply that a preconfigured beam model based on aggregated linear accelerators will be sufficient in most cases. Conclusion: With the use of this new platform for beam data commissioning, errors in beam data collection and treatment planning system modeling are greatly reduced. With the reduction in errors during acquisition, the resulting beam models are quite similar, suggesting that a common beam model may be possible in the future. Development is ongoing to create routine quality assurance tools to compare back to the beam data acquired during commissioning. I am a medical physicist for Alzyen Medical Physics, and perform commissioning services.« less

Investigating output and energy variations and their relationship to delivery QA results using Statistical Process Control for helical tomotherapy.

PubMed

Binny, Diana; Mezzenga, Emilio; Lancaster, Craig M; Trapp, Jamie V; Kairn, Tanya; Crowe, Scott B

2017-06-01

The aims of this study were to investigate machine beam parameters using the TomoTherapy quality assurance (TQA) tool, establish a correlation to patient delivery quality assurance results and to evaluate the relationship between energy variations detected using different TQA modules. TQA daily measurement results from two treatment machines for periods of up to 4years were acquired. Analyses of beam quality, helical and static output variations were made. Variations from planned dose were also analysed using Statistical Process Control (SPC) technique and their relationship to output trends were studied. Energy variations appeared to be one of the contributing factors to delivery output dose seen in the analysis. Ion chamber measurements were reliable indicators of energy and output variations and were linear with patient dose verifications. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Informatics Futures in Dental Education and Research: Quality Assurance.

ERIC Educational Resources Information Center

Crall, James J.

1991-01-01

The paper addresses the potential of informatics to patient care quality assurance curricula, focusing on (1) terminology and developments related to quality of care evaluations; (2) criticisms of traditional approaches; (3) limitations of existing data sources for quality assurance in dentistry; and (4) quality assurance considerations in…

10 CFR 830.121 - Quality Assurance Program (QAP).

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality... the Quality Assurance criteria in § 830.122. (b) The contractor responsible for a DOE nuclear facility...

10 CFR 830.121 - Quality Assurance Program (QAP).

Code of Federal Regulations, 2013 CFR

2013-01-01

... changes continue to satisfy the quality assurance requirements. (4) Conduct work in accordance with the... 10 Energy 4 2013-01-01 2013-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality...

10 CFR 830.121 - Quality Assurance Program (QAP).

Code of Federal Regulations, 2012 CFR

2012-01-01

... changes continue to satisfy the quality assurance requirements. (4) Conduct work in accordance with the... 10 Energy 4 2012-01-01 2012-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality...

10 CFR 830.121 - Quality Assurance Program (QAP).

Code of Federal Regulations, 2011 CFR

2011-01-01

... changes continue to satisfy the quality assurance requirements. (4) Conduct work in accordance with the... 10 Energy 4 2011-01-01 2011-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality...

10 CFR 830.121 - Quality Assurance Program (QAP).

Code of Federal Regulations, 2014 CFR

2014-01-01

... changes continue to satisfy the quality assurance requirements. (4) Conduct work in accordance with the... 10 Energy 4 2014-01-01 2014-01-01 false Quality Assurance Program (QAP). 830.121 Section 830.121 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Quality Assurance Requirements § 830.121 Quality...

48 CFR 246.408 - Single-agency assignments of Government contract quality assurance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of Government contract quality assurance. 246.408 Section 246.408 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.408 Single-agency assignments of Government contract...

48 CFR 1846.470 - Contract clause.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 1846.470 Contract clause. The contracting officer may insert a clause substantially as stated at 1852.246-71, Government Contract Quality Assurance Functions, in solicitations and contracts to specify the location(s) of quality assurance...

78 FR 37850 - Quality Assurance Program Requirements (Operations)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-24

... NUCLEAR REGULATORY COMMISSION [NRC-2013-0021] Quality Assurance Program Requirements (Operations... Regulatory Commission (NRC) is issuing a revision to Regulatory Guide (RG) 1.33, ``Quality Assurance Program... managerial and administrative Quality Assurance (QA) controls for nuclear power plants during operations...

Opinion of gastroenterologists towards quality assurance in endoscopy.

PubMed

de Jonge, Vincent; Kuipers, Ernst J; van Leerdam, Monique E

2011-03-01

Quality assurance has become an important issue. Many societies are adopting quality assurance programs in order to monitor and improve quality of care. To assess the opinion of gastroenterologists towards quality assurance on the endoscopy department. A survey was sent to all gastroenterologists (n=319) in the Netherlands. It assessed their opinion on a quality assurance program for endoscopy units, including its design, logistics, and content. 200 gastroenterologists (63%) completed the questionnaire. 95% had a positive opinion towards quality assurance and 67% supposed an increase in quality. 28% assumed a negative impact on the time available for patient contact by introducing a quality assurance program and 35% that the capacity would decrease. A negative attitude towards disclosure of results to insurance companies (23%) and media (53%) was reported. Female gastroenterologists were less positive to share the results with other stakeholders (p<0.05). Most important quality measurements were assessment of complications (97%), standardised reporting (96%), and adequate patient information (95%). Gastroenterologists have a positive attitude towards quality assurance. However, concerns do exist about time investment and disclosure of results to others. Information provision and procedure characteristics were considered the most important aspects of quality assurance. Copyright © 2010 Editrice Gastroenterologica Italiana S.r.l. Published by Elsevier Ltd. All rights reserved.

48 CFR 246.402 - Government contract quality assurance at source.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Government contract... ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.402 Government contract quality assurance at source. Do not require...

Multinational Quality Assurance

ERIC Educational Resources Information Center

Kinser, Kevin

2011-01-01

Multinational colleges and universities pose numerous challenges to the traditional models of quality assurance that are designed to validate domestic higher education. When institutions cross international borders, at least two quality assurance protocols are involved. To guard against fraud and abuse, quality assurance in the host country is…

40 CFR 31.45 - Quality assurance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Quality assurance. 31.45 Section 31.45... Requirements Reports, Records, Retention, and Enforcement § 31.45 Quality assurance. If the grantee's project... quality assurance practices consisting of policies, procedures, specifications, standards, and...

Learning from Adverse Events in Obstetrics: Is a Standardized Computer Tool an Effective Strategy for Root Cause Analysis?

PubMed

Murray-Davis, Beth; McDonald, Helen; Cross-Sudworth, Fiona; Ahmed, Rashid; Simioni, Julia; Dore, Sharon; Marrin, Michael; DeSantis, Judy; Leyland, Nicholas; Gardosi, Jason; Hutton, Eileen; McDonald, Sarah

2015-08-01

Adverse events occur in up to 10% of obstetric cases, and up to one half of these could be prevented. Case reviews and root cause analysis using a structured tool may help health care providers to learn from adverse events and to identify trends and recurring systems issues. We sought to establish the reliability of a root cause analysis computer application called Standardized Clinical Outcome Review (SCOR). We designed a mixed methods study to evaluate the effectiveness of the tool. We conducted qualitative content analysis of five charts reviewed by both the traditional obstetric quality assurance methods and the SCOR tool. We also determined inter-rater reliability by having four health care providers review the same five cases using the SCOR tool. The comparative qualitative review revealed that the traditional quality assurance case review process used inconsistent language and made serious, personalized recommendations for those involved in the case. In contrast, the SCOR review provided a consistent format for recommendations, a list of action points, and highlighted systems issues. The mean percentage agreement between the four reviewers for the five cases was 75%. The different health care providers completed data entry and assessment of the case in a similar way. Missing data from the chart and poor wording of questions were identified as issues affecting percentage agreement. The SCOR tool provides a standardized, objective, obstetric-specific tool for root cause analysis that may improve identification of risk factors and dissemination of action plans to prevent future events.

Education for All in South Africa: Developing a National System for Quality Assurance.

ERIC Educational Resources Information Center

Smith, William J.; Ngoma-Maema, Wendy Yolisa

2003-01-01

Draws on international research, policy, and practice relevant to quality assurance systems to analyze the development of a national framework for educational quality assurance in South Africa. Describes an emerging framework for quality assurance that encompasses evaluation of student achievement, quality audits and reviews, program and service…

Quality Assurance and School Monitoring in Hong Kong

ERIC Educational Resources Information Center

Mok, Magdalena Mo Ching

2007-01-01

This study reports on the Hong Kong education quality assurance and school monitoring system. Three research questions were addressed: (1) Who controls the quality of school education in Hong Kong? (2) What strategies are used in the Hong Kong school education quality assurance process? (3) Agenda for Future Research on quality assurance and…

Web-Based Quality Assurance Process Drives Improvements in Obstetric Ultrasound in 5 Low- and Middle-Income Countries

PubMed Central

Swanson, Jonathan O; Plotner, David; Franklin, Holly L; Swanson, David L; Lokomba Bolamba, Victor; Lokangaka, Adrien; Sayury Pineda, Irma; Figueroa, Lester; Garces, Ana; Muyodi, David; Esamai, Fabian; Kanaiza, Nancy; Mirza, Waseem; Naqvi, Farnaz; Saleem, Sarah; Mwenechanya, Musaku; Chiwila, Melody; Hamsumonde, Dorothy; McClure, Elizabeth M; Goldenberg, Robert L; Nathan, Robert O

2016-01-01

ABSTRACT High quality is important in medical imaging, yet in many geographic areas, highly skilled sonographers are in short supply. Advances in Internet capacity along with the development of reliable portable ultrasounds have created an opportunity to provide centralized remote quality assurance (QA) for ultrasound exams performed at rural sites worldwide. We sought to harness these advances by developing a web-based tool to facilitate QA activities for newly trained sonographers who were taking part in a cluster randomized trial investigating the role of limited obstetric ultrasound to improve pregnancy outcomes in 5 low- and middle-income countries. We were challenged by connectivity issues, by country-specific needs for website usability, and by the overall need for a high-throughput system. After systematically addressing these needs, the resulting QA website helped drive ultrasound quality improvement across all 5 countries. It now offers the potential for adoption by future ultrasound- or imaging-based global health initiatives. PMID:28031304

QAIT: a quality assurance issue tracking tool to facilitate the improvement of clinical data quality.

PubMed

Zhang, Yonghong; Sun, Weihong; Gutchell, Emily M; Kvecher, Leonid; Kohr, Joni; Bekhash, Anthony; Shriver, Craig D; Liebman, Michael N; Mural, Richard J; Hu, Hai

2013-01-01

In clinical and translational research as well as clinical trial projects, clinical data collection is prone to errors such as missing data, and misinterpretation or inconsistency of the data. A good quality assurance (QA) program can resolve many such errors though this requires efficient communications between the QA staff and data collectors. Managing such communications is critical to resolving QA problems but imposes a major challenge for a project involving multiple clinical and data processing sites. We have developed a QA issue tracking (QAIT) system to support clinical data QA in the Clinical Breast Care Project (CBCP). This web-based application provides centralized management of QA issues with role-based access privileges. It has greatly facilitated the QA process and enhanced the overall quality of the CBCP clinical data. As a stand-alone system, QAIT can supplement any other clinical data management systems and can be adapted to support other projects. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Preceptor Perceptions of Virtual Quality Assurance Experiential Site Visits.

PubMed

Clarke, Cheryl L; Schott, Kathryn A; Arnold, Austin D

2018-05-01

Objective. To determine preceptor perceptions of the value of experiential quality assurance site visits between virtual and onsite visits, and to gauge preceptor opinions of the optimal method of site visits based on the type of visit received. Methods. Site visits (12 virtual and 17 onsite) were conducted with 29 APPE sites located at least 200 miles from campus. Participating preceptors were invited to complete an online post-visit survey adapted from a previously validated and published survey tool measuring preceptor perceptions of the value of traditional onsite visits. Results. Likert-type score averages for survey questions ranged from 4.2 to 4.6 in the virtual group and from 4.3 to 4.7 in the onsite group. No statistically significant difference was found between the two groups. Preceptors were more inclined to prefer the type of visit they received. Preceptors receiving onsite visits were also more likely to indicate no visit type preference. Conclusion. Preceptors perceived value from both onsite and virtual site visits. Preceptors who experienced virtual site visits highly preferred that methodology. This study suggests that virtual site visits may be a viable alternative for providing experiential quality assurance site visits from a preceptor's perspective.

21 CFR 892.1940 - Radiologic quality assurance instrument.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Radiologic quality assurance instrument. 892.1940... (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Diagnostic Devices § 892.1940 Radiologic quality assurance instrument. (a) Identification. A radiologic quality assurance instrument is a device intended for medical...

10 CFR 76.93 - Quality assurance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each of...

49 CFR 180.505 - Quality assurance program.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Quality assurance program. 180.505 Section 180.505... MAINTENANCE OF PACKAGINGS Qualification and Maintenance of Tank Cars § 180.505 Quality assurance program. The quality assurance program requirements of § 179.7 of this subchapter apply. ...

10 CFR 76.93 - Quality assurance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each of...

10 CFR 76.93 - Quality assurance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each of...

10 CFR 76.93 - Quality assurance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each of...

10 CFR 76.93 - Quality assurance.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each of...

Quality Assurance for University Teaching.

ERIC Educational Resources Information Center

Ellis, Roger, Ed.

This book, written from a British perspective, presents 17 papers on quality assurance in teaching at the university level. The first eight papers address issues of assuring quality and include: (1) "Quality Assurance for University Teaching; Issues and Approaches" (Roger Ellis); (2) "A British Standard for University…

77 FR 18709 - Quality Assurance Requirements for Continuous Opacity Monitoring Systems at Stationary Sources

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-28

... Quality Assurance Requirements for Continuous Opacity Monitoring Systems at Stationary Sources AGENCY... direct final rule titled ``Quality Assurance Requirements for Continuous Opacity Monitoring Systems at...--Quality Assurance Requirements for Continuous Opacity Monitoring Systems at Stationary Sources Docket, EPA...

The FAA's Approach to Quality Assurance in the Flight Safety Analysis of Launch and Reentry Vehicles

NASA Astrophysics Data System (ADS)

Murray, Daniel P.; Weil, Andre

2010-09-01

The U.S. Federal Aviation Administration(FAA) Office of Commercial Space Transportation’s safety mission is to ensure protection of the public, property, and the national security and foreign policy interests of the United States during commercial launch and reentry activities. As part of this mission, the FAA issues licenses to the operators of launch and reentry vehicles who successfully demonstrate compliance with FAA regulations. To meet these regulations, vehicle operators submit an application that contains, among other things, flight safety analyses of their proposed missions. In the process of evaluating these submitted analyses, the FAA often conducts its own independent analyses, using input data from the submitted license application. These analyses are conducted according to approved procedures using industry developed tools. To assist in achieving the highest levels of quality in these independent analyses, the FAA has developed a quality assurance program that consists of multiple levels of review. These reviews rely on the work of multiple teams, as well as additional, independently performed work of support contractors. This paper describes the FAA’s quality assurance process for flight safety analyses. Members of the commercial space industry may find that elements of this process can be easily applied to their own analyses, improving the quality of the material they submit to the FAA in their license applications.

2015 International PV Quality Assurance Task Force (PVQAT) Workshop |

Science.gov Websites

Photovoltaic Research | NREL International PV Quality Assurance Task Force (PVQAT) Workshop 2015 International PV Quality Assurance Task Force (PVQAT) Workshop Wednesday, February 25, 2015 Chairs : Tony Sample and Masaaki Yamamichi The 2015 International PV Quality Assurance Task Force (PVQAT

10 CFR 71.103 - Quality assurance organization.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance organization. 71.103 Section 71.103... Quality Assurance § 71.103 Quality assurance organization. (a) The licensee, 2 certificate holder, and... that are important to safety have been correctly performed. (c) The persons and organizations...

10 CFR 71.103 - Quality assurance organization.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance organization. 71.103 Section 71.103... Quality Assurance § 71.103 Quality assurance organization. (a) The licensee, 2 certificate holder, and... that are important to safety have been correctly performed. (c) The persons and organizations...

42 CFR 441.585 - Quality assurance system.

Code of Federal Regulations, 2012 CFR

2012-10-01

... provides information about the provisions of quality improvement and assurance to each individual receiving... 42 Public Health 4 2012-10-01 2012-10-01 false Quality assurance system. 441.585 Section 441.585...) § 441.585 Quality assurance system. (a) States must establish and maintain a comprehensive, continuous...

30 CFR 74.9 - Quality assurance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Quality assurance. 74.9 Section 74.9 Mineral... DUST SAMPLING DEVICES Requirements for Continuous Personal Dust Monitors § 74.9 Quality assurance. (a) General requirements. The applicant shall establish and maintain a quality control system that assures...

10 CFR 71.105 - Quality assurance program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance program. 71.105 Section 71.105 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE MATERIAL Quality Assurance § 71.105 Quality assurance program. (a) The licensee, certificate holder, and applicant for a CoC...

40 CFR 30.54 - Quality assurance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Quality assurance. 30.54 Section 30.54... NON-PROFIT ORGANIZATIONS Post-Award Requirements Reports and Records § 30.54 Quality assurance. If the... data generation, the grantee shall develop and implement quality assurance practices consisting of...

10 CFR 71.135 - Quality assurance records.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance records. 71.135 Section 71.135 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE MATERIAL Quality Assurance § 71.135 Quality assurance records. The licensee, certificate holder, and applicant for a CoC...

10 CFR 63.144 - Quality assurance program change.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance program change. 63.144 Section 63.144 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC... assurance program information that duplicates language in quality assurance regulatory guides and quality...

U.S. Geological Survey quality-assurance plan for continuous water-quality monitoring in Kansas, 2014

USGS Publications Warehouse

Bennett, Trudy J.; Graham, Jennifer L.; Foster, Guy M.; Stone, Mandy L.; Juracek, Kyle E.; Rasmussen, Teresa J.; Putnam, James E.

2014-01-01

A quality-assurance plan for use in conducting continuous water-quality monitoring activities has been developed for the Kansas Water Science Center in accordance with guidelines set forth by the U.S. Geological Survey. This quality-assurance plan documents the standards, policies, and procedures used by the U.S. Geological Survey in Kansas for activities related to the collection, processing, storage, analysis, and release of continuous water-quality monitoring data. The policies and procedures that are documented in this quality-assurance plan for continuous water-quality monitoring activities complement quality-assurance plans for surface-water and groundwater activities in Kansas.

Tools for developing a quality management program: proactive tools (process mapping, value stream mapping, fault tree analysis, and failure mode and effects analysis).

PubMed

Rath, Frank

2008-01-01

This article examines the concepts of quality management (QM) and quality assurance (QA), as well as the current state of QM and QA practices in radiotherapy. A systematic approach incorporating a series of industrial engineering-based tools is proposed, which can be applied in health care organizations proactively to improve process outcomes, reduce risk and/or improve patient safety, improve through-put, and reduce cost. This tool set includes process mapping and process flowcharting, failure modes and effects analysis (FMEA), value stream mapping, and fault tree analysis (FTA). Many health care organizations do not have experience in applying these tools and therefore do not understand how and when to use them. As a result there are many misconceptions about how to use these tools, and they are often incorrectly applied. This article describes these industrial engineering-based tools and also how to use them, when they should be used (and not used), and the intended purposes for their use. In addition the strengths and weaknesses of each of these tools are described, and examples are given to demonstrate the application of these tools in health care settings.

Adults Learning Languages: A CILT Guide to Good Practice

ERIC Educational Resources Information Center

Harnisch, Henriette, Ed.; Swanton, Pauline, Ed.

2004-01-01

"Adults Learning Languages" is aimed at those responsible for teaching languages across AE, FE and HE. In the much-changed world of post-19 languages, new funding and inspection regimes with revised needs for quality assurance are challenging practitioners to adapt and review approaches. This book offers teachers of languages to adults tools to…

76 FR 30904 - Rural Utilities Service Telecommunications Loan and Loan Guarantee Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-27

... constraints. Maintaining the List of Materials, which includes a product by product review, simply cannot be... has been a very useful tool in assuring product quality and reliability. However, Rural Development is... is very different, and far more complex and diverse, today than it was over 60 years ago. Product...

42 CFR 417.106 - Quality assurance program; Availability, accessibility, and continuity of basic and supplemental...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Qualified Health Maintenance Organizations: Services § 417.106 Quality assurance program; Availability, accessibility, and continuity of basic and supplemental health services. (a) Quality assurance program. Each HMO or CMP must have an ongoing quality assurance program for its health services that meets the...

Managerialism and the Risky Business of Quality Assurance in Universities

ERIC Educational Resources Information Center

Davis, Annemarie

2017-01-01

Purpose: This paper aims to identify what is needed to enhance academic quality assurance in a university, with specific efforts to reduce the risks associated with ritualised quality assurance practices. Design/methodology/approach: The aspects to enhance academic quality assurance efforts in managerial universities are identified through a…

10 CFR 72.174 - Quality assurance records.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance records. 72.174 Section 72.174 Energy... NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality Assurance § 72.174 Quality assurance records. The licensee, applicant for a license, certificate holder, and...

40 CFR 194.22 - Quality assurance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Quality assurance. 194.22 Section 194... General Requirements § 194.22 Quality assurance. (a)(1) As soon as practicable after April 9, 1996, the Department shall adhere to a quality assurance program that implements the requirements of ASME NQA-1-1989...

10 CFR 72.144 - Quality assurance program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance program. 72.144 Section 72.144 Energy... NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality Assurance § 72.144 Quality assurance program. (a) The licensee, applicant for a license, certificate holder...

Quality assurance program plan for radionuclide airborne emissions monitoring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boom, R.J.

1995-12-01

This Quality Assurance Program Plan identifies quality assurance program requirements and addresses the various Westinghouse Hanford Company organizations and their particular responsibilities in regards to sample and data handling of radiological airborne emissions. This Quality Assurance Program Plan is prepared in accordance with and to written requirements.

42 CFR 441.474 - Quality assurance and improvement plan.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Quality assurance and improvement plan. 441.474... SERVICES Optional Self-Directed Personal Assistance Services Program § 441.474 Quality assurance and improvement plan. (a) The State must provide a quality assurance and improvement plan that describes the State...

42 CFR 441.474 - Quality assurance and improvement plan.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 4 2011-10-01 2011-10-01 false Quality assurance and improvement plan. 441.474... SERVICES Optional Self-Directed Personal Assistance Services Program § 441.474 Quality assurance and improvement plan. (a) The State must provide a quality assurance and improvement plan that describes the State...

42 CFR 441.474 - Quality assurance and improvement plan.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 4 2013-10-01 2013-10-01 false Quality assurance and improvement plan. 441.474... SERVICES Optional Self-Directed Personal Assistance Services Program § 441.474 Quality assurance and improvement plan. (a) The State must provide a quality assurance and improvement plan that describes the State...

42 CFR 441.474 - Quality assurance and improvement plan.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 4 2012-10-01 2012-10-01 false Quality assurance and improvement plan. 441.474... SERVICES Optional Self-Directed Personal Assistance Services Program § 441.474 Quality assurance and improvement plan. (a) The State must provide a quality assurance and improvement plan that describes the State...

42 CFR 441.474 - Quality assurance and improvement plan.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 4 2014-10-01 2014-10-01 false Quality assurance and improvement plan. 441.474... SERVICES Optional Self-Directed Personal Assistance Services Program § 441.474 Quality assurance and improvement plan. (a) The State must provide a quality assurance and improvement plan that describes the State...

10 CFR 72.174 - Quality assurance records.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance records. 72.174 Section 72.174 Energy... NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality Assurance § 72.174 Quality assurance records. The licensee, applicant for a license, certificate holder, and...

10 CFR 72.174 - Quality assurance records.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance records. 72.174 Section 72.174 Energy... NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality Assurance § 72.174 Quality assurance records. The licensee, applicant for a license, certificate holder, and...

10 CFR 72.174 - Quality assurance records.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Quality assurance records. 72.174 Section 72.174 Energy... NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality Assurance § 72.174 Quality assurance records. The licensee, applicant for a license, certificate holder, and...

Assessing the use of food coloring as an appropriate visual guide for homogenously mixed capsule powders in extemporaneous compounding.

PubMed

Hoffmann, Brittany; Carlson, Christie; Rao, Deepa A

2014-01-01

The purpose of this work was to assess the use of food colors as a visual aid to determine homogeneous mixing in the extemporaneous preparation of capsules. Six different batches of progesterone slow-release 200-mg capsules were prepared by different mixing methods until visually determined as homogeneous based on yellow food coloring distribution in the preparation by the Central Iowa Compounding Pharmacy, Des Moines, Iowa. UV-Vis spectrophotometry was used to extract and evaluate yellow food coloring content in each of these batches and compared to an in-house, small-batch geometric dilution preparation of progesterone slow- release 200-mg capsules. Of the 6 batches tested, only one, which followed the principles of additive dilution and an appropriate mixing time, was both visually and quantitatively homogeneous in the detection of yellow food coloring. The use of food coloring alone is not a valid quality-assurance tool in determining homogeneous mixing. Principles of geometric and/or additive dilution and appropriate mixing times along with the food color can serve as a quality-assurance tool.

48 CFR 246.408-70 - Subsistence.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.408-70... quality in food, to perform quality assurance for subsistence contract items. The designation may— (1...

Quality-Assurance Plan for Water-Quality Activities of the U.S. Geological Survey Montana Water Science Center

USGS Publications Warehouse

Lambing, John H.

2006-01-01

In accordance with guidelines set forth by the Office of Water Quality in the Water Resources Discipline of the U.S. Geological Survey (USGS), a quality-assurance plan has been created for use by the USGS Montana Water Science Center in conducting water-quality activities. This quality-assurance plan documents the standards, policies, and procedures used by the USGS Montana Water Science Center for activities related to the collection, processing, storage, analysis, and publication of water-quality data. The policies and procedures presented in this quality-assurance plan for water-quality activities complement the quality-assurance plans for surface-water and ground-water activities and suspended-sediment analysis.

Quality Assurance Project Plan for the treatability study of in situ vitrification of Seepage Pit 1 in Waste Area Grouping 7 at Oak Ridge National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This Quality Assurance Project Plan (QAPjP) establishes the quality assurance procedures and requirements to be implemented for the control of quality-related activities for Phase 3 of the Treatability Study (TS) of In Situ Vitrification (ISV) of Seepage Pit 1, ORNL Waste Area Grouping 7. This QAPjP supplements the Quality Assurance Plan for Oak Ridge National Laboratory Environmental Restoration Program by providing information specific to the ISV-TS. Phase 3 of the TS involves the actual ISV melt operations and posttest monitoring of Pit 1 and vicinity. Previously, Phase 1 activities were completed, which involved determining the boundaries of Pit 1, usingmore » driven rods and pipes and mapping the distribution of radioactivity using logging tools within the pipes. Phase 2 involved sampling the contents, both liquid and solids, in and around seepage Pit 1 to determine their chemical and radionuclide composition and the spatial distribution of these attributes. A separate QAPjP was developed for each phase of the project. A readiness review of the Phase 3 activities presented QAPjP will be conducted prior to initiating field activities, and an Operational Acceptance, Test (OAT) will also be conducted with no contamination involved. After, the OAT is complete, the ISV process will be restarted, and the melt will be allowed to increase with depth and incorporate the radionuclide contamination at the bottom of Pit 1. Upon completion of melt 1, the equipment will be shut down and mobilized to an adjacent location at which melt 2 will commence.« less

Quality assurance in postgraduate pathology training the Dutch way: regular assessment, monitoring of training programs but no end of training examination.

PubMed

van der Valk, Paul

2016-01-01

It might seem self-evident that in the transition from a supervised trainee to an independent professional who is no longer supervised, formal assessment of whether the trainee knows his/her trade well enough to function independently is necessary. This would then constitute an end of training examination. Such examinations are practiced in several countries but a rather heterogeneous situation exists in the EU countries. In the Netherlands, the training program is not concluded by a summative examination and reasons behind this situation are discussed. Quality assurance of postgraduate medical training in the Netherlands has been developed along two tracks: (1) not a single testing moment but continuous evaluation of the performance of the trainee in 'real time' situations and (2) monitoring of the quality of the offered training program through regular site-visits. Regular (monthly and/or yearly) evaluations should be part of every self-respecting training program. In the Netherlands, these evaluations are formative only: their intention is to provide the trainee a tool by which he or she can see whether they are on track with their training schedule. In the system in the Netherlands, regular site-visits to training programs constitute a crucial element of quality assurance of postgraduate training. During the site-visit, the position and perceptions of the trainee are key elements. The perception by the trainee of the training program, the institution (or department) offering the training program, and the professionals involved in the training program is explicitly solicited and systematically assessed. With this two-tiered approach high-quality postgraduate training is assured without the need for an end of training examination.

Quality assurance for health and environmental chemistry: 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gautier, M.A.; Gladney, E.S.; Koski, N.L.

1991-10-01

This report documents the continuing quality assurance efforts of the Health and Environmental Chemistry Group (HSE-9) at the Los Alamos National Laboratory. The philosophy, methodology, computing resources, and laboratory information management system used by the quality assurance program to encompass the diversity of analytical chemistry practiced in the group are described. Included in the report are all quality assurance reference materials used, along with their certified or consensus concentrations, and all analytical chemistry quality assurance measurements made by HSE-9 during 1990.

Standard procedures and quality-control practices for the U.S. Geological Survey National Field Quality Assurance Program from 1982 through 1993

USGS Publications Warehouse

Stanley, D.L.

1995-01-01

The U.S. Geological Survey operates the National Field Quality Assurance Program to provide quality- assurance reference samples to field personnel who make water-quality field measurements. The program monitors the accuracy and precision of pH, specific conductance, and alkalinity field measurements. This report documents the operational procedures and quality-control techniques used in operating the quality-assurance program.

Project officer's perspective: quality assurance as a management tool.

PubMed

Heiby, J

1993-06-01

Advances in the management of health programs in less developed countries (LDC) have not kept pace with the progress of the technology used. The US Agency for International Development mandated the Quality Assurance Project (QAP) to provide quality improvement technical assistance to primary health care systems in LDCs while developing appropriate quality assurance (QA) strategies. The quality of health care in recent years in the US and Europe focused on the introduction of management techniques developed for industry into health systems. The experience of the QAP and its predecessor, the PRICOR Project, shows that quality improvement techniques facilitate measurement of quality of care. A recently developed WHO model for the management of the sick child provides scientifically based standards for actual care. Since 1988, outside investigators measuring how LDC clinicians perform have revealed serious deficiencies in quality compared with the program's own standards. This prompted developed of new QA management initiatives: 1) communicating standards clearly to the program staff; 2) actively monitoring actual performance corresponds to these standards; and 3) taking action to improve performance. QA means that managers are expected to monitor service delivery, undertake problem solving, and set specific targets for quality improvement. Quality improvement methods strengthen supervision as supervisors can objectively assess health worker performance. QA strengthens the management functions that support service delivery, e.g., training, records management, finance, logistics, and supervision. Attention to quality can contribute to improved health worker motivation and effective incentive programs by recognition for a job well done and opportunities for learning new skills. These standards can also address patient satisfaction. QA challenges managers to aim for the optimal level of care attainable.

High Speed Video Applications In The Pharmaceutical Industry

NASA Astrophysics Data System (ADS)

Stapley, David

1985-02-01

The pursuit of quality is essential in the development and production of drugs. The pursuit of excellence is relentless, a never ending search. In the pharmaceutical industry, we all know and apply wide-ranging techniques to assure quality production. We all know that in reality none of these techniques are perfect for all situations. We have all experienced, the damaged foil, blister or tube, the missing leaflet, the 'hard to read' batch code. We are all aware of the need to supplement the traditional techniques of fault finding. This paper shows how high speed video systems can be applied to fully automated filling and packaging operations as a tool to aid the company's drive for high quality and productivity. The range of products involved totals some 350 in approximately 3,000 pack variants, encompassing creams, ointments, lotions, capsules, tablets, parenteral and sterile antibiotics. Pharmaceutical production demands diligence at all stages, with optimum use of the techniques offered by the latest technology. Figure 1 shows typical stages of pharmaceutical production in which quality must be assured, and highlights those stages where the use of high speed video systems have proved of value to date. The use of high speed video systems begins with the very first use of machine and materials: commissioning and validation, (the term used for determining that a process is capable of consistently producing the requisite quality) and continues to support inprocess monitoring, throughout the life of the plant. The activity of validation in the packaging environment is particularly in need of a tool to see the nature of high speed faults, no matter how infrequently they occur, so that informed changes can be made precisely and rapidly. The prime use of this tool is to ensure that machines are less sensitive to minor variations in component characteristics.

Quality-Assurance Plan for Water-Quality Activities in the USGS Ohio Water Science Center

USGS Publications Warehouse

Francy, Donna S.; Shaffer, Kimberly H.

2008-01-01

In accordance with guidelines set forth by the Office of Water Quality in the Water Resources Discipline of the U.S. Geological Survey, a quality-assurance plan has been written for use by the Ohio Water Science Center in conducting water-quality activities. This quality-assurance plan documents the standards, policies, and procedures used by the Ohio Water Science Center for activities related to the collection, processing, storage, analysis, and publication of water-quality data. The policies and procedures documented in this quality-assurance plan for water-quality activities are meant to complement the Ohio Water Science Center quality-assurance plans for water-quality monitors, the microbiology laboratory, and surface-water and ground-water activities.

Perspectives on Quality Assurance in Higher Education in Norway

ERIC Educational Resources Information Center

Lycke, Kirsten Hofgaard

2004-01-01

Quality assurance is well known internationally but the notion is relatively new in Norway. To understand some of the issues and dilemmas that emerge in the Norwegian reception of quality assurance in higher education, this article traces how quality assurance is gaining its form and how international trends are understood, transposed and adopted…

Quality Assurance in Higher Education: Proposals for Consultation.

ERIC Educational Resources Information Center

Higher Education Funding Council for England, Bristol.

This document sets out for consultation proposals for a revised method for quality assurance of teaching and learning in higher education. The proposals cover: (1) the objectives and principles of quality assurance; (2) an approach to quality assurance based on external audit principles; (3) the collection and publication of information; (4)…

An In-Depth Study on the Impact of External Quality Assurance

ERIC Educational Resources Information Center

Stensaker, Bjorn; Langfeldt, Liv; Harvey, Lee; Huisman, Jeroen; Westerheijden, Don

2011-01-01

After more than two decades of external quality assurance, there is an increasing interest in questions concerning the impact and effects of this activity. Following an external evaluation of NOKUT--the Norwegian quality assurance agency, this article studies the impact of external quality assurance in detail by analysing quantitative and…

21 CFR 1000.55 - Recommendation for quality assurance programs in diagnostic radiology facilities.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Recommendation for quality assurance programs in... Recommendations § 1000.55 Recommendation for quality assurance programs in diagnostic radiology facilities. (a) Applicability. Quality assurance programs as described in paragraph (c) of this section are recommended for all...

21 CFR 1000.55 - Recommendation for quality assurance programs in diagnostic radiology facilities.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Recommendation for quality assurance programs in... Recommendations § 1000.55 Recommendation for quality assurance programs in diagnostic radiology facilities. (a) Applicability. Quality assurance programs as described in paragraph (c) of this section are recommended for all...

21 CFR 1000.55 - Recommendation for quality assurance programs in diagnostic radiology facilities.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Recommendation for quality assurance programs in... Recommendations § 1000.55 Recommendation for quality assurance programs in diagnostic radiology facilities. (a) Applicability. Quality assurance programs as described in paragraph (c) of this section are recommended for all...

Quality Assurance in the European Higher Education Area: The Emergence of a German Market for Quality Assurance Agencies

ERIC Educational Resources Information Center

Serrano-Velarde, Kathia E.

2008-01-01

Most European countries have introduced systematic quality assurance as part of an overall governance reform aimed at enhancing universities' autonomy. Researchers and economic entrepreneurs tend, however, to underestimate the political dimension of accreditation and evaluation when they consider the contribution of quality assurance to the…

Quality Assurance in Postgraduate Education. ENQA Workshop Report 12

ERIC Educational Resources Information Center

Bitusikova, Alexandra; Bohrer, Janet; Borosic, Ivana; Costes, Nathalie; Edinsel, Kerim; Hollander, Karoline; Jacobsson, Gunilla; Jakopovic, Ivan Filip; Kearney, Mary-Louise; Mulder, Fred; Negyesi, Judith; Pietzonka, Manuel

2010-01-01

The present report follows an ENQA (European Association for Quality Assurance in Higher Education) Workshop on Quality Assurance and Postgraduate Education, hosted by the Romanian Agency for Quality Assurance in Higher Education (ARACIS) in Brasov, Romania on 12-13 March 2009. The workshop was an excellent opportunity for ENQA members to exchange…

Quality Assurance Policies and Practices in Scandinavian Higher Education Systems: Convergence or Different Paths?

ERIC Educational Resources Information Center

Kalpazidou Schmidt, Evanthia

2017-01-01

Because there is close cooperation on quality assurance in the Scandinavian countries, one would expect there to be convergence of quality assurance policies and practices in Scandinavian higher education. Few studies have analysed these quality assurance policies and practices from a comparative viewpoint. Based on empirical evidence produced in…

48 CFR 46.404 - Government contract quality assurance for acquisitions at or below the simplified acquisition...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Government contract quality assurance for acquisitions at or below the simplified acquisition threshold. 46.404 Section 46.404 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance...

48 CFR 46.404 - Government contract quality assurance for acquisitions at or below the simplified acquisition...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Government contract quality assurance for acquisitions at or below the simplified acquisition threshold. 46.404 Section 46.404 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance...

48 CFR 46.404 - Government contract quality assurance for acquisitions at or below the simplified acquisition...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Government contract quality assurance for acquisitions at or below the simplified acquisition threshold. 46.404 Section 46.404 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance...

48 CFR 46.404 - Government contract quality assurance for acquisitions at or below the simplified acquisition...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Government contract quality assurance for acquisitions at or below the simplified acquisition threshold. 46.404 Section 46.404 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance...

48 CFR 46.404 - Government contract quality assurance for acquisitions at or below the simplified acquisition...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Government contract quality assurance for acquisitions at or below the simplified acquisition threshold. 46.404 Section 46.404 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance...

Development of a flattening filter free multiple source model for use as an independent, Monte Carlo, dose calculation, quality assurance tool for clinical trials.

PubMed

Faught, Austin M; Davidson, Scott E; Popple, Richard; Kry, Stephen F; Etzel, Carol; Ibbott, Geoffrey S; Followill, David S

2017-09-01

The Imaging and Radiation Oncology Core-Houston (IROC-H) Quality Assurance Center (formerly the Radiological Physics Center) has reported varying levels of compliance from their anthropomorphic phantom auditing program. IROC-H studies have suggested that one source of disagreement between institution submitted calculated doses and measurement is the accuracy of the institution's treatment planning system dose calculations and heterogeneity corrections used. In order to audit this step of the radiation therapy treatment process, an independent dose calculation tool is needed. Monte Carlo multiple source models for Varian flattening filter free (FFF) 6 MV and FFF 10 MV therapeutic x-ray beams were commissioned based on central axis depth dose data from a 10 × 10 cm 2 field size and dose profiles for a 40 × 40 cm 2 field size. The models were validated against open-field measurements in a water tank for field sizes ranging from 3 × 3 cm 2 to 40 × 40 cm 2 . The models were then benchmarked against IROC-H's anthropomorphic head and neck phantom and lung phantom measurements. Validation results, assessed with a ±2%/2 mm gamma criterion, showed average agreement of 99.9% and 99.0% for central axis depth dose data for FFF 6 MV and FFF 10 MV models, respectively. Dose profile agreement using the same evaluation technique averaged 97.8% and 97.9% for the respective models. Phantom benchmarking comparisons were evaluated with a ±3%/2 mm gamma criterion, and agreement averaged 90.1% and 90.8% for the respective models. Multiple source models for Varian FFF 6 MV and FFF 10 MV beams have been developed, validated, and benchmarked for inclusion in an independent dose calculation quality assurance tool for use in clinical trial audits. © 2017 American Association of Physicists in Medicine.

Open access tools for quality-assured and efficient data entry in a large, state-wide tobacco survey in India

PubMed Central

Shewade, Hemant Deepak; Vidhubala, E; Subramani, Divyaraj Prabhakar; Lal, Pranay; Bhatt, Neelam; Sundaramoorthi, C.; Singh, Rana J.; Kumar, Ajay M. V.

2017-01-01

ABSTRACT Background: A large state-wide tobacco survey was conducted using modified version of pretested, globally validated Global Adult Tobacco Survey (GATS) questionnaire in 2015–22016 in Tamil Nadu, India. Due to resource constrains, data collection was carrid out using paper-based questionnaires (unlike the GATS-India, 2009–2010, which used hand-held computer devices) while data entry was done using open access tools. The objective of this paper is to describe the process of data entry and assess its quality assurance and efficiency. Methods: In EpiData language, a variable is referred to as ‘field’ and a questionnaire (set of fields) as ‘record’. EpiData software was used for double data entry with adequate checks followed by validation. Teamviewer was used for remote training and trouble shooting. The EpiData databases (one each for each district and each zone in Chennai city) were housed in shared Dropbox folders, which enabled secure sharing of files and automatic back-up. Each database for a district/zone had separate file for data entry of household level and individual level questionnaire. Results: Of 32,945 households, there were 111,363 individuals aged ≥15 years. The average proportion of records with data entry errors for a district/zone in household level and individual level file was 4% and 24%, respectively. These are the errors that would have gone unnoticed if single entry was used. The median (inter-quartile range) time taken for double data entry for a single household level and individual level questionnaire was 30 (24, 40) s and 86 (64, 126) s, respectively. Conclusion: Efficient and quality-assured near-real-time data entry in a large sub-national tobacco survey was performed using innovative, resource-efficient use of open access tools. PMID:29092673

Quality assurance in transnational higher education: a case study of the tropEd network

PubMed Central

2013-01-01

Introduction Transnational or cross-border higher education has rapidly expanded since the 1980s. Together with that expansion issues on quality assurance came to the forefront. This article aims to identify key issues regarding quality assurance of transnational higher education and discusses the quality assurance of the tropEd Network for International Health in Higher Education in relation to these key issues. Methods Literature review and review of documents. Results From the literature the following key issues regarding transnational quality assurance were identified and explored: comparability of quality assurance frameworks, true collaboration versus erosion of national education sovereignty, accreditation agencies and transparency. The tropEd network developed a transnational quality assurance framework for the network. The network accredits modules through a rigorous process which has been accepted by major stakeholders. This process was a participatory learning process and at the same time the process worked positive for the relations between the institutions. Discussion The development of the quality assurance framework and the process provides a potential example for others. PMID:23537108

Experimental investigation on the effects of cooling system on surface quality in high speed milling of an aluminium alloy

NASA Astrophysics Data System (ADS)

Chirita, B.; Tampu, N. C.; Brabie, G.; Radu, M. C.

2016-08-01

Surface quality is often an important feature of industrial products, not only from the impact it has on the aesthetic aspect but also for the functional role of the parts. High quality surface increases corrosion resistance, assures a longer life cycle for the product and lowers the wear. For a machined part, surface quality is influenced by a series of factors such as the material of the part, the process type, tool geometry, cutting parameters or the cooling system. The choice of the cooling system is especially important, taking into account that the proper conditions will not only assure a superior surface quality, but will also lower the costs and reduce the environmental impact and health risks. The present study aims to investigate the performance of the cooling system and the effect of the cutting parameters on the characteristics of the surfaces resulted from high speed face milling of some parts made of Al 7050-T7451 aluminium alloy. Dry cutting conditions and minimum quantity lubrication (MQL) where used. The results were analysed using analysis of variance (ANOVA).

7 CFR 90.102 - Quality assurance review.

Code of Federal Regulations, 2011 CFR

2011-01-01

... INTRODUCTION Quality Assurance § 90.102 Quality assurance review. (a) Each laboratory performing tests and... review of the adequacy of quality control measures taken by the laboratory for the standardized method of...

7 CFR 90.102 - Quality assurance review.

Code of Federal Regulations, 2012 CFR

2012-01-01

... INTRODUCTION Quality Assurance § 90.102 Quality assurance review. (a) Each laboratory performing tests and... review of the adequacy of quality control measures taken by the laboratory for the standardized method of...

7 CFR 90.102 - Quality assurance review.

Code of Federal Regulations, 2013 CFR

2013-01-01

... INTRODUCTION Quality Assurance § 90.102 Quality assurance review. (a) Each laboratory performing tests and... review of the adequacy of quality control measures taken by the laboratory for the standardized method of...

7 CFR 90.102 - Quality assurance review.

Code of Federal Regulations, 2014 CFR

2014-01-01

... INTRODUCTION Quality Assurance § 90.102 Quality assurance review. (a) Each laboratory performing tests and... review of the adequacy of quality control measures taken by the laboratory for the standardized method of...

Control by quality: proposition of a typology.

PubMed

Pujo, P; Pillet, M

The application of Quality tools and methods in industrial management has always had a fundamental impact on the control of production. It influences the behavior of the actors concerned, while introducing the necessary notions and formalizations, especially for production systems with little or no automation, which constitute a large part of the industrial activity. Several quality approaches are applied in the workshop and are implemented at the level of the control. In this paper, the authors present a typology of the various approaches that have successively influenced control, such as statistical process control, quality assurance, and continuous improvement. First the authors present a parallel between production control and quality organizational structure. They note the duality between control, which is aimed at increasing productivity, and quality, which aims to satisfy the needs of the customer. They also note the hierarchical organizational structure of these two systems of management with, at each level, the notion of a feedback loop. This notion is fundamental to any kind of decision making. The paper is organized around the operational, tactical, and strategic levels, by describing for each level the main methods and tools for control by quality. The overview of these tools and methods starts at the operational level, with the Statistical Process Control, the Taguchi technique, and the "six sigma" approach. On the tactical level, we find a quality system approach, with a documented description of the procedures introduced in the firm. The management system can refer here to Quality Assurance, Total Productive Maintenance, or Management by Total Quality. The formalization through procedures of the rules of decision governing the process control enhances the validity of these rules. This leads to the enhancement of their reliability and to their consolidation. All this counterbalances the human, intrinsically fluctuating, behavior of the control operators. Strategic control by quality is then detailed, and the two main approaches, the continuous improvement approach and the proactive improvement approach, are introduced. Finally, the authors observe that at each of the three levels, the continuous process improvement, which is a component of Total Quality, becomes an essential preoccupation for the control. Ultimately, the recursive utilization of the Deming cycle remains the best practice for the control by quality.

Principles and Practices for Quality Assurance and Quality Control

USGS Publications Warehouse

Jones, Berwyn E.

1999-01-01

Quality assurance and quality control are vital parts of highway runoff water-quality monitoring projects. To be effective, project quality assurance must address all aspects of the project, including project management responsibilities and resources, data quality objectives, sampling and analysis plans, data-collection protocols, data quality-control plans, data-assessment procedures and requirements, and project outputs. Quality control ensures that the data quality objectives are achieved as planned. The historical development and current state of the art of quality assurance and quality control concepts described in this report can be applied to evaluation of data from prior projects.

Revision 2 of the Enbridge Quality Assurance Project Plan

EPA Pesticide Factsheets

This Quality Assurance Project Plan (QAPP) presents Revision 2 of the organization, objectives, planned activities, and specific quality assurance/quality control (QA/QC) procedures associated with the Enbridge Marshall Pipeline Release Project.

40 CFR 75.21 - Quality assurance and quality control requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Quality assurance and quality control... PROGRAMS (CONTINUED) CONTINUOUS EMISSION MONITORING Operation and Maintenance Requirements § 75.21 Quality assurance and quality control requirements. (a) Continuous emission monitoring systems. The owner or...

TU-AB-BRD-04: Development of Quality Management Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomadsen, B.

2015-06-15

Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before amore » failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to perform failure modes and effects analysis analysis for a given process Learn what fault trees are all about Learn how to design a quality management program based upon the information obtained from process mapping, failure modes and effects analysis and fault tree analysis. Dunscombe: Director, TreatSafely, LLC and Center for the Assessment of Radiological Sciences; Consultant to IAEA and Varian Thomadsen: President, Center for the Assessment of Radiological Sciences Palta: Vice President of the Center for the Assessment of Radiological Sciences.« less

Development of an Instructional Quality Assurance Model in Nursing Science

ERIC Educational Resources Information Center

Ajpru, Haruthai; Pasiphol, Shotiga; Wongwanich, Suwimon

2011-01-01

The purpose of this study was to develop an instructional quality assurance model in nursing science. The study was divided into 3 phases; (1) to study the information for instructional quality assurance model development (2) to develop an instructional quality assurance model in nursing science and (3) to audit and the assessment of the developed…

Quality Assurance of Assessment and Moderation Discourses Involving Sessional Staff

ERIC Educational Resources Information Center

Grainger, Peter; Adie, Lenore; Weir, Katie

2016-01-01

Quality assurance is a major agenda in tertiary education. The casualisation of academic work, especially in teaching, is also a quality assurance issue. Casual or sessional staff members teach and assess more than 50% of all university courses in Australia, and yet the research in relation to the role sessional staff play in quality assurance of…

The Standards Paradox: How Quality Assurance Regimes Can Subvert Teaching and Learning in Higher Education

ERIC Educational Resources Information Center

Brady, Norman; Bates, Agnieszka

2016-01-01

The quest continues to standardise quality assurance systems throughout the European Higher Education Area (EHEA) under the auspices of the Bologna Process and led by the European Network for Quality Assurance (ENQA). Mirroring its member organisation in England, the Quality Assurance Agency (QAA), ENQA identifies, as one of its core aims, the…

[Web-based electronic patient record as an instrument for quality assurance within an integrated care concept].

PubMed

Händel, A; Jünemann, A G M; Prokosch, H-U; Beyer, A; Ganslandt, T; Grolik, R; Klein, A; Mrosek, A; Michelson, G; Kruse, F E

2009-03-01

A prerequisite for integrated care programmes is the implementation of a communication network meeting quality assurance standards. Against this background the main objective of the integrated care project between the University Eye Hospital Erlangen and the health insurance company AOK Bayern was to evaluate the potential and the acceptance of a web-based electronic patient record in the context of cataract and retinal surgery. Standardised modules for capturing pre-, intra- and post-operative data on the basis of clinical pathway guidelines for cataract- and retinal surgery have been developed. There are 6 data sets recorded per patient (1 pre-operative, 1 operative, 4-6 post-operative). For data collection, a web-based communication system (Soarian Integrated Care) has been chosen which meets the high requirements in data security, as well as being easy to handle. This teleconsultation system and the embedded electronic patient record are independent of the software used by respective offices and hospitals. Data transmission and storage were carried out in real-time. At present, 101 private ophthalmologists are taking part in the IGV contract with the University Eye Hospital Erlangen. This corresponds to 52% of all private ophthalmologists in the region. During the period from January 1st 2006 to December 31st 2006, 1844 patients were entered. Complete documentation was achieved in 1390 (75%) of all surgical procedures. For evaluation of this data, a multidimensional report and analysis tool (Cognos) was used. The deviation from target refraction as one quality indicator was in the mean 0.09 diopter. The web-based patient record used in this project was highly accepted by the private ophthalmologists. However there are still general concerns against the exchange of medical data via the internet. Nevertheless, the web-based patient record is an essential tool for a functional integration between the ambulatory and stationary health-care units. In addition to the telemedicine functions of the system, we achieved the export of the data to a data warehouse system in order to provide a flexible and powerful tool for quality assurance analysis and reporting.

Distribution and Validation of CERES Irradiance Global Data Products Via Web Based Tools

NASA Technical Reports Server (NTRS)

Rutan, David; Mitrescu, Cristian; Doelling, David; Kato, Seiji

2016-01-01

The CERES SYN1deg product provides climate quality 3-hourly globally gridded and temporally complete maps of top of atmosphere, in atmosphere, and surface fluxes. This product requires efficient release to the public and validation to maintain quality assurance. The CERES team developed web-tools for the distribution of both the global gridded products and grid boxes that contain long term validation sites that maintain high quality flux observations at the Earth's surface. These are found at: http://ceres.larc.nasa.gov/order_data.php. In this poster we explore the various tools available to users to sub-set, download, and validate using surface observations the SYN1Deg and Surface-EBAF products. We also analyze differences found in long-term records from well-maintained land surface sites such as the ARM central facility and high quality buoy radiometers, which due to their isolated nature cannot be maintained in a similar manner to their land based counterparts.

Review on how proficiency testing needs in Brazil are supplied by accredited providers by Cgcre

NASA Astrophysics Data System (ADS)

Moura, M. H.; Borges, R. M. H.

2015-01-01

Proficiency testing schemes are an important tool to quality assurance in measurement as well as a tool to harmonization of multilateral recognition arrangements for accreditation. The General Coordination for Accreditation (Cgcre) of INMETRO developed a new program to accredit proficiency testing providers according with the International Standard ISO/IEC 17043. This work presents a review on needs for proficiency testing schemes in Brazil and assesses how these needs are supplied by accredited providers.

10 CFR 72.142 - Quality assurance organization.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance organization. 72.142 Section 72.142... Assurance § 72.142 Quality assurance organization. (a) The licensee, applicant for a license, certificate... writing the authority and duties of persons and organizations performing activities affecting the...

10 CFR 72.142 - Quality assurance organization.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance organization. 72.142 Section 72.142... Assurance § 72.142 Quality assurance organization. (a) The licensee, applicant for a license, certificate... writing the authority and duties of persons and organizations performing activities affecting the...

Endorsing good quality assurance practices in molecular pathology: risks and recommendations for diagnostic laboratories and external quality assessment providers.

PubMed

Tembuyser, Lien; Dequeker, Elisabeth M C

2016-01-01

Quality assurance is an indispensable element in a molecular diagnostic laboratory. The ultimate goal is to warrant patient safety. Several risks that can compromise high quality procedures are at stake, from sample collection to the test performed by the laboratory, the reporting of test results to clinicians, and the organization of effective external quality assessment schemes. Quality assurance should therefore be safeguarded at each level and should imply a holistic multidisciplinary approach. This review aims to provide an overview of good quality assurance practices and discusses certain risks and recommendations to promote and improve quality assurance for both diagnostic laboratories and for external quality assessment providers. The number of molecular targets is continuously rising, and new technologies are evolving. As this poses challenges for clinical implementation and increases the demand for external quality assessment, the formation of an international association for improving quality assurance in molecular pathology is called for.

Measuring Quality in Ethics Consultation.

PubMed

Bliss, Sally E; Oppenlander, Jane; Dahlke, Jacob M; Meyer, Gordon J; Williford, Eva M; Macauley, Robert C

2016-01-01

For all of the emphasis on quality improvement-as well as the acknowledged overlap between assessment of the quality of healthcare services and clinical ethics-the quality of clinical ethics consultation has received scant attention, especially in terms of empirical measurement. Recognizing this need, the second edition of Core Competencies for Health Care Ethics Consultation1 identified four domains of ethics quality: (1) ethicality, (2) stakeholders' satisfaction, (3) resolution of the presenting conflict/dilemma, and (4) education that translates into knowledge. This study is the first, to our knowledge, to directly measure all of these domains. Here we describe the quality improvement process undertaken at a tertiary care academic medical center, as well as the tools developed to measure the quality of ethics consultation, which include post-consultation satisfaction surveys and weekly case conferences. The information gained through these tools helps to improve not only the process of ethics consultation, but also the measurement and assurance of quality. Copyright 2016 The Journal of Clinical Ethics. All rights reserved.

A practical implementation of physics quality assurance for photon adaptive radiotherapy.

PubMed

Cai, Bin; Green, Olga L; Kashani, Rojano; Rodriguez, Vivian L; Mutic, Sasa; Yang, Deshan

2018-03-14

The fast evolution of technology in radiotherapy (RT) enabled the realization of adaptive radiotherapy (ART). However, the new characteristics of ART pose unique challenges for efficiencies and effectiveness of quality assurance (QA) strategies. In this paper, we discuss the necessary QAs for ART and introduce a practical implementation. A previously published work on failure modes and effects analysis (FMEA) of ART is introduced first to explain the risks associated with ART sub-processes. After a brief discussion of QA challenges, we review the existing QA strategies and tools that might be suitable for each ART step. By introducing the MR-guided online ART QA processes developed at our institute, we demonstrate a practical implementation. The limitations and future works to develop more robust and efficient QA strategies are discussed at the end. Copyright © 2018. Published by Elsevier GmbH.

Organizing a breast cancer database: data management.

PubMed

Yi, Min; Hunt, Kelly K

2016-06-01

Developing and organizing a breast cancer database can provide data and serve as valuable research tools for those interested in the etiology, diagnosis, and treatment of cancer. Depending on the research setting, the quality of the data can be a major issue. Assuring that the data collection process does not contribute inaccuracies can help to assure the overall quality of subsequent analyses. Data management is work that involves the planning, development, implementation, and administration of systems for the acquisition, storage, and retrieval of data while protecting it by implementing high security levels. A properly designed database provides you with access to up-to-date, accurate information. Database design is an important component of application design. If you take the time to design your databases properly, you'll be rewarded with a solid application foundation on which you can build the rest of your application.

48 CFR 2146.270 - FEGLI Program quality assurance requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Quality Requirements 2146.270 FEGLI Program quality assurance requirements. (a) The... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false FEGLI Program quality...

48 CFR 2146.270 - FEGLI Program quality assurance requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Quality Requirements 2146.270 FEGLI Program quality assurance requirements. (a) The... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false FEGLI Program quality...

48 CFR 2146.270 - FEGLI Program quality assurance requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Quality Requirements 2146.270 FEGLI Program quality assurance requirements. (a) The... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false FEGLI Program quality...

48 CFR 2146.270 - FEGLI Program quality assurance requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Quality Requirements 2146.270 FEGLI Program quality assurance requirements. (a) The... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false FEGLI Program quality...

48 CFR 2146.270 - FEGLI Program quality assurance requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Quality Requirements 2146.270 FEGLI Program quality assurance requirements. (a) The... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true FEGLI Program quality...

Technology Transfer Program (TTP). Quality Assurance System. Volume 2. Appendices

DTIC Science & Technology

1980-03-03

LSCo Report No. - 2X23-5.1-4-I TECHNOLOGY TRANSFER PROGRAM (TTP) FINAL REPORT QUALITY ASSURANCE SYSTEM Appendix A Accuracy Control System QUALITY...4-1 TECHNOLOGY TRANSFER PROGRAM (TTP) FINAL REPORT QUALITY ASSURANCE SYSTEM Appendix A Accuracy Control System QUALITY ASSURANCE VOLUME 2 APPENDICES...prepared by: Livingston Shipbuilding Company Orange, Texas March 3, 1980 APPENDIX A ACCURACY CONTROL SYSTEM . IIII MARINE TECHNOLOGY. INC. HP-121

[Points of view: the role of quality measurement from the Federal Joint Committee's perspective].

PubMed

Klakow-Franck, Regina

2014-01-01

The Federal Joint Committee (G-BA) is a central decision-making body that issues binding directives to ensure the quality of both inpatient and outpatient health care services within the German Statutory Health Insurance system. Quality measurement on the basis of quality indicators has proceeded furthest in the field of external quality assurance (QA) of inpatient services. Originally designed for quality development in a "protected environment" through learning from better practices, it has been faced with new expectations since competitive elements have been introduced into the health care system. The economisation of medicine is de facto the driving force of the development of QA measures. In terms of health policy, the 2013 coalition agreement includes "a renaissance of the concept of quality competition". In particular, this is meant to strengthen the decision-making options of insured persons by creating more transparency into the quality of not only inpatient but also outpatient care and, if necessary, to support the possibility of selective agreements with individual health insurance funds. The campaign planned to improve the quality of hospitals also provides for a quality-oriented advancement of hospital planning and funding; and the Federal Joint Committee, supported by the new Institute for Quality Assurance and Transparency in the Healthcare System in accordance with Section 137a of Book V of the Social Code (SGB V) in the GKV-FQWG version will be assigned new tasks within this context, too. On the whole, the measures already agreed upon in the Act to Improve the Financial Structure and Quality of the Statutory Health Insurance System (GKV-FQWG) and—as far as can now be anticipated—the proceedings of the working group set up between the German government and the German federal states indicate that there is a high need to improve the methods and tools of external quality assurance available, starting with questions about the validity of the quality indicators used and their relevance to patient care. Special issues and tasks require the development of new methods and tools. The need for paying more attention to the patient perspective will pose a particular challenge to future quality measurement. Additional information about the QA documentation of health care providers and the basis of social data that should be used preferentially can be gained from patient surveys. Despite the high political expectations (for example, concerning the development of online charts comparing the quality of inpatient care delivery), the Federal Joint Committee should not overlook the necessity of embedding quality measurement and public reporting into a comprehensive quality framework which can be used to promote continuous quality improvement through a structured feedback of the results to health care providers. In addition, we need a consistent patient orientation and a systematic evaluation of the QA measures employed. By networking more closely with evidence-based medicine and health services research, quality assurance may give rise to a systematic quality research from which genuine quality and care objectives can be derived and which, as an integral part of a "learning care", supports a patient-oriented advancement of care structures. Copyright © 2014. Published by Elsevier GmbH.

Material quality assurance risk assessment : [summary].

DOT National Transportation Integrated Search

2013-01-01

With the shift from quality control (QC) of materials and placement techniques : to quality assurance (QA) and acceptance over the years, the role of the Office : of Materials Technology (OMT) has been shifting towards assurance of : material quality...

The Practice of Continuous Assessment in Primary Schools: The Case of Chagni, Ethiopia

ERIC Educational Resources Information Center

Abejehu, Sintayehu Belay

2016-01-01

Continuous assessment is part and parcel of instructional process that has to be taken as a key tool in educational quality assurance endeavor. Thus, this article examined the actual practice of continuous assessment in primary schools of Chagni City Administration, Ethiopia. To address this purpose the study employed descriptive survey design.…

Peer reviews: taking on new meanings.

PubMed

Raia, Lucille

2011-01-01

Peer reviews in nursing are historically used to gauge performance within an individual's scope of practice or as a tool to evaluate a sentinel or adverse event. Quality of care measures, clinical pertinence, and evaluating standards of care have begun as parallel strategies to replace the former uses in assuring the right care at the right time in the right setting.

The Labour Market, Graduate Competences and Study Programme Development: A Case Study

ERIC Educational Resources Information Center

Sirca, Nada Trunk; Nastav, Bojan; Lesjak, Dusan; Sulcic, Viktorija

2006-01-01

Developments in higher education are taking place in the wider context of globalisation, the Lisbon strategy and within the framework of the Bologna Process. Designing and developing Bologna programmes by taking into account the needs of the economy is a tool for successful quality assurance in higher education and for close cooperation with the…

The European Higher Education Area: An Interesting Opportunity to Contribute to Global Advancement

ERIC Educational Resources Information Center

Capa, Agueda Benito

2012-01-01

Universidad Europea de Madrid, along with other universities and the support of the Agency for Quality Assurance, Accreditation and Prospects for the Community of Madrid (ACAP--Agencia de Calidad, Acreditación y Prospectiva de las Universidades de Madrid), developed a tool to measure progress in the construction of the European Higher Education…

Program Review: A Tool for Continuous Improvement of Academic Programs. AIR Professional File. Number 105, Fall 2007

ERIC Educational Resources Information Center

Pitter, Gita Wijesinghe

2007-01-01

Program reviews became widely used as quality assurance activities in the United States beginning in the 1970s. Since then, they have evolved as an essential component in demonstrating institutional effectiveness to accrediting bodies. The paper discusses various approaches to reviews with a focus on a recently reengineered institutional program…

The Introduction of External Quality Assurance in South African Higher Education: An Analysis of Stakeholder Response

ERIC Educational Resources Information Center

Luckett, Kathy

2007-01-01

This paper analyses the take-up of proposals for a national quality assurance system in South Africa using different approaches to quality assurance to classify stakeholder responses to survey and interview questions. The context of the study was the introduction of an external quality assurance system for South African higher education by an…

Implementing Quality Assurance in Saudi Arabia: A Comparison between the MESO and the MICRO Levels at PSU

ERIC Educational Resources Information Center

Albaqami, Saud

2015-01-01

Quality assurance in higher education remains to be one of the most prominent fields of research at the present. In the Saudi Arabian higher education institutions (HEIs), quality assurance is a relatively new concept and Saudi universities seem not to effectively implement quality assurance caused by the certain obstacles. As such, there are two…

10 CFR Appendix B to Part 50 - Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Quality Assurance Criteria for Nuclear Power Plants and... LICENSING OF PRODUCTION AND UTILIZATION FACILITIES Pt. 50, App. B Appendix B to Part 50—Quality Assurance... report a description of the quality assurance program to be applied to the design, fabrication...

We Can't Go Home Again: Insights from a Quarter Century of Experiments in External Academic Quality Assurance

ERIC Educational Resources Information Center

Dill, David D.

2010-01-01

What have we learned from 25 years of experience with external academic quality assurance that can help design more effective framework conditions for assuring academic standards? The key elements appear to be the structure and means of evaluating national academic quality assurance agencies, the nature of academic quality information mandated by…

40 CFR 60.2170 - Is there a minimum amount of monitoring data I must obtain?

Code of Federal Regulations, 2013 CFR

2013-07-01

... monitoring system quality assurance or quality control activities (including, as applicable, calibration... required monitoring system quality assurance or quality control activities including, as applicable... required monitoring system quality assurance or control activities in calculations used to report emissions...

[Quality assurance of rehabilitation by the German pension insurance: an overview].

PubMed

Klosterhuis, H; Baumgarten, E; Beckmann, U; Erbstösser, S; Lindow, B; Naumann, B; Widera, T; Zander, J

2010-12-01

The German pension insurance has in recent years developed a comprehensive programme for quality assurance in rehabilitation, and has implemented the programme into routine practice. Different aspects of rehabilitation are evaluated with differentiated instruments. Issues dealt with inter alia include the quality of rehabilitative care in a narrower sense, the structure and organisation of the rehabilitation centres, as well as quality from the patients' perspective. On the whole, positive results predominate. Big differences in quality however have been found between the rehabilitation centres. The data collections and data evaluations carried out make a continuous process of quality assurance reporting possible for use by rehabilitation centres and pension insurance agencies. This will enable targeted initiatives for quality improvement. The methods and procedures of quality assurance are enhanced at regular intervals, and the scope of quality assurance is extended. Thus, rehab quality assurance is also expanded to cover ambulant rehabilitation or rehabilitation of children and young people. © Georg Thieme Verlag KG Stuttgart · New York.

An institutional review board-based clinical research quality assurance program.

PubMed

Lad, Pramod M; Dahl, Rebecca

2013-01-01

Despite the acknowledged importance of quality assurance in the clinical research process, the problem of how such a program should be implemented at the level of an academic teaching hospital or a similar institution has not been addressed in the literature. Despite the fact that quality assurance is expected in programs which certify and accredit Institutional Review Boards (IRBs), very little is known about the role of the IRB in programs of clinical research quality assurance. In this article we consider the definition of clinical research quality assurance, and describe a program designed to achieve it. The key elements of such a program are education at the site level, which has both mandatory and voluntary components, and an auditing and monitoring program, which reinforces the education on quality assurance. The role of the IRB in achieving the program goals and the organizational placement of the quality assurance program within the IRB structure and function are important items of discussion.

A Comparison of the Audit and Accreditation Tools Used By The Health Care Financing Administration, The Texas Department of Insurance, and The National Committee on Quality Assurance: The Cost of Multi-Agency Oversight on Medicare+Choice Plans in Texas

DTIC Science & Technology

2001-04-12

Comparison of Oversight Models in Managed Care 1 Running Head: Comparison of Oversight Models in Managed Care A Comparison of the Audit and...TITLE AND SUBTITLE A Comparison of the Audit and Accreditation Tools Used By The Health Care Financing Administration, The Texas Department of...Comparison of Oversight Models in Managed Care 5 A Comparison of the Audit and Accreditation Tools Used By The Health Care Financing

10 CFR 60.150 - Scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... components will perform satisfactorily in service. Quality assurance includes quality control, which... COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Quality Assurance § 60.150 Scope. As used in this part, quality assurance comprises all those planned and systematic...

Quality assurance in transition.

PubMed

Blumenfeld, S N

1993-06-01

This paper outlines the early approaches to quality assurance, and its transition from business to health care. It then describes the development of the more recent trends in quality assurance of Total Quality Management and Continuous Quality Improvement and discusses the strengths and weaknesses of these approaches. The paper then goes on to show how these approaches have been modified for application to peripheral health services in developing countries through the work of the Primary Health Care Operations Research Project and the Quality Assurance Project.

Class Model Development Using Business Rules

NASA Astrophysics Data System (ADS)

Skersys, Tomas; Gudas, Saulius

New developments in the area of computer-aided system engineering (CASE) greatly improve processes of the information systems development life cycle (ISDLC). Much effort is put into the quality improvement issues, but IS development projects still suffer from the poor quality of models during the system analysis and design cycles. At some degree, quality of models that are developed using CASE tools can be assured using various. automated. model comparison, syntax. checking procedures. It. is also reasonable to check these models against the business domain knowledge, but the domain knowledge stored in the repository of CASE tool (enterprise model) is insufficient (Gudas et al. 2004). Involvement of business domain experts into these processes is complicated because non- IT people often find it difficult to understand models that were developed by IT professionals using some specific modeling language.

Enhancing the role of case-oriented peer review to improve quality and safety in radiation oncology: Executive summary

PubMed Central

Marks, Lawrence B.; Adams, Robert D.; Pawlicki, Todd; Blumberg, Albert L.; Hoopes, David; Brundage, Michael D.; Fraass, Benedick A.

2013-01-01

This report is part of a series of white papers commissioned for the American Society for Radiation Oncology (ASTRO) Board of Directors as part of ASTRO's Target Safely Campaign, focusing on the role of peer review as an important component of a broad safety/quality assurance (QA) program. Peer review is one of the most effective means for assuring the quality of qualitative, and potentially controversial, patient-specific decisions in radiation oncology. This report summarizes many of the areas throughout radiation therapy that may benefit from the application of peer review. Each radiation oncology facility should evaluate the issues raised and develop improved ways to apply the concept of peer review to its individual process and workflow. This might consist of a daily multidisciplinary (eg, physicians, dosimetrists, physicists, therapists) meeting to review patients being considered for, or undergoing planning for, radiation therapy (eg, intention to treat and target delineation), as well as meetings to review patients already under treatment (eg, adequacy of image guidance). This report is intended to clarify and broaden the understanding of radiation oncology professionals regarding the meaning, roles, benefits, and targets for peer review as a routine quality assurance tool. It is hoped that this work will be a catalyst for further investigation, development, and study of the efficacy of peer review techniques and how these efforts can help improve the safety and quality of our treatments. PMID:24175002

Quality assurance: Importance of systems and standard operating procedures

PubMed Central

Manghani, Kishu

2011-01-01

It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company. PMID:21584180

Quality assurance: Importance of systems and standard operating procedures.

PubMed

Manghani, Kishu

2011-01-01

It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company.

Quality Assurance in Higher Education: A Review of Literature

ERIC Educational Resources Information Center

Ryan, Tricia

2015-01-01

This paper examines the literature surrounding quality assurance in global higher education. It provides an overview of accreditation as a mechanism to ensure quality in higher education, examines models of QA, and explores the concept of quality (including definitions of quality and quality assurance). In addition, this paper provides a review of…

24 CFR 200.935 - Administrator qualifications and procedures for HUD building products certification programs.

Code of Federal Regulations, 2011 CFR

2011-04-01

... guidelines in any quality assurance review: (1) ASQC Q9000-1-1994 Quality Management and Quality Assurance... Systems—Model for Quality Assurance in Final Inspection and Test; (5) ASQC Q9004-1-1994 Quality Management... in interpreting testing standards, test methods, evaluating test reports and quality control programs...

Why Is Quality in Higher Education Not Achieved? The View of Academics

ERIC Educational Resources Information Center

Cardoso, Sónia; Rosa, Maria J.; Stensaker, Bjørn

2016-01-01

Quality assurance is currently an established activity in Europe, driven either by national quality assurance agencies or by institutions themselves. However, whether quality assurance is perceived as actually being capable of promoting quality is still a question open to discussion. Based on three different views on quality derived from the…

TU-AB-BRD-00: Task Group 100

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2015-06-15

Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before amore » failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to perform failure modes and effects analysis analysis for a given process Learn what fault trees are all about Learn how to design a quality management program based upon the information obtained from process mapping, failure modes and effects analysis and fault tree analysis. Dunscombe: Director, TreatSafely, LLC and Center for the Assessment of Radiological Sciences; Consultant to IAEA and Varian Thomadsen: President, Center for the Assessment of Radiological Sciences Palta: Vice President of the Center for the Assessment of Radiological Sciences.« less

TU-AB-BRD-03: Fault Tree Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunscombe, P.

2015-06-15

Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before amore » failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to perform failure modes and effects analysis analysis for a given process Learn what fault trees are all about Learn how to design a quality management program based upon the information obtained from process mapping, failure modes and effects analysis and fault tree analysis. Dunscombe: Director, TreatSafely, LLC and Center for the Assessment of Radiological Sciences; Consultant to IAEA and Varian Thomadsen: President, Center for the Assessment of Radiological Sciences Palta: Vice President of the Center for the Assessment of Radiological Sciences.« less

TU-AB-BRD-01: Process Mapping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palta, J.

2015-06-15

Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before amore » failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to perform failure modes and effects analysis analysis for a given process Learn what fault trees are all about Learn how to design a quality management program based upon the information obtained from process mapping, failure modes and effects analysis and fault tree analysis. Dunscombe: Director, TreatSafely, LLC and Center for the Assessment of Radiological Sciences; Consultant to IAEA and Varian Thomadsen: President, Center for the Assessment of Radiological Sciences Palta: Vice President of the Center for the Assessment of Radiological Sciences.« less

TU-AB-BRD-02: Failure Modes and Effects Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huq, M.

2015-06-15

Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before amore » failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to perform failure modes and effects analysis analysis for a given process Learn what fault trees are all about Learn how to design a quality management program based upon the information obtained from process mapping, failure modes and effects analysis and fault tree analysis. Dunscombe: Director, TreatSafely, LLC and Center for the Assessment of Radiological Sciences; Consultant to IAEA and Varian Thomadsen: President, Center for the Assessment of Radiological Sciences Palta: Vice President of the Center for the Assessment of Radiological Sciences.« less

48 CFR 46.403 - Government contract quality assurance at destination.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.403... overseas shipment will normally be inspected for condition and quantity at points of embarkation; (4) Brand...

Feasibility study of using statistical process control to customized quality assurance in proton therapy.

PubMed

Rah, Jeong-Eun; Shin, Dongho; Oh, Do Hoon; Kim, Tae Hyun; Kim, Gwe-Ya

2014-09-01

To evaluate and improve the reliability of proton quality assurance (QA) processes and, to provide an optimal customized tolerance level using the statistical process control (SPC) methodology. The authors investigated the consistency check of dose per monitor unit (D/MU) and range in proton beams to see whether it was within the tolerance level of the daily QA process. This study analyzed the difference between the measured and calculated ranges along the central axis to improve the patient-specific QA process in proton beams by using process capability indices. The authors established a customized tolerance level of ±2% for D/MU and ±0.5 mm for beam range in the daily proton QA process. In the authors' analysis of the process capability indices, the patient-specific range measurements were capable of a specification limit of ±2% in clinical plans. SPC methodology is a useful tool for customizing the optimal QA tolerance levels and improving the quality of proton machine maintenance, treatment delivery, and ultimately patient safety.

On the Role of Impact Evaluation of Quality Assurance from the Strategic Perspective of Quality Assurance Agencies in the European Higher Education Area

ERIC Educational Resources Information Center

Damian, Radu; Grifoll, Josep; Rigbers, Anke

2015-01-01

In this paper the current national legislations, the quality assurance approaches and the activities of impact analysis of three quality assurance agencies from Romania, Spain and Germany are described from a strategic perspective. The analysis shows that the general methodologies (comprising, for example, self-evaluation reports, peer reviews,…

Quality assurance paradigms for artificial intelligence in modelling and simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oren, T.I.

1987-04-01

New classes of quality assurance concepts and techniques are required for the advanced knowledge-processing paradigms (such as artificial intelligence, expert systems, or knowledge-based systems) and the complex problems that only simulative systems can cope with. A systematization of quality assurance problems as well as examples are given to traditional and cognizant quality assurance techniques in traditional and cognizant modelling and simulation.

ENQA: 10 Years (2000-2010): A Decade of European Co-Operation in Quality Assurance in Higher Education

ERIC Educational Resources Information Center

Crozier, Fiona, Ed.; Costes, Nathalie, Ed.; Ranne, Paula, Ed.; Stalter, Maria, Ed.

2010-01-01

The history of ENQA (European Association for Quality Assurance in Higher Education) arises in the late 1990s when the first formal procedures for quality assurance begun to stabilize on a national level. As a result of the European Pilot Projects in the field of external quality assurance during the nineties, participants felt the need for…

The Practice of a Quality Assurance System in Open and Distance Learning: A Case Study at Universitas Terbuka Indonesia (The Indonesia Open University)

ERIC Educational Resources Information Center

Belawati, Tian; Zuhairi, Amin

2007-01-01

Quality assurance for distance higher education is one of the main concerns among institutions and stakeholders today. This paper examines the experiences of Universitas Terbuka (UT), which has initiated and implemented an innovative strategy of quality assurance (QA) for continuous improvement. The credo of the UT quality assurance system is…

23 CFR 650.313 - Inspection procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Quality control and quality assurance. Assure systematic quality control (QC) and quality assurance (QA... periodic field review of inspection teams, periodic bridge inspection refresher training for program managers and team leaders, and independent review of inspection reports and computations. (h) Follow-up on...

77 FR 67366 - Federal Acquisition Regulation; Information Collection; Quality Assurance Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-09

..., acceptance, warranty, and other measures associated with quality requirements. Standard clauses related to...; Information Collection; Quality Assurance Requirements AGENCY: Department of Defense (DOD), General Services... requirement concerning quality assurance requirements. Public comments are particularly invited on: Whether...

Saving Quality from Quality Assurance. Perspective

ERIC Educational Resources Information Center

Stephenson, Sandra L.

2004-01-01

The word 'quality' has become a 'central term in the lexicon of contemporary higher education and a major point of interest to various interest groups'. As quality assurance systems have developed around the world, certain assumptions are becoming alarmingly widespread: for example that quality assurance is new to higher education, that quality…

LOVE CANAL MONITORING PROGRAM. GCA QA/QC (QUALITY ASSURANCE/QUALITY CONTROL) SUMMARY REPORT

EPA Science Inventory

One of the most important responsibilities of the Love Canal prime contractor was the institution and maintenance of a quality assurance program. An important objective of the quality assurance program was to alert the subcontractors to the importance of high quality work on thei...

Quality control in mutation analysis: the European Molecular Genetics Quality Network (EMQN).

PubMed

Müller, C R

2001-08-01

The demand for clinical molecular genetics testing has steadily grown since its introduction in the 1980s. In order to reach and maintain the agreed quality standards of laboratory medicine, the same internal and external quality assurance (IQA/EQA) criteria have to be applied as for "conventional" clinical chemistry or pathology. In 1996 the European Molecular Genetics Quality Network (EMQN) was established in order to spread QA standards across Europe and to harmonise the existing national activities. EMQN is operated by a central co-ordinator and 17 national partners from 15 EU countries; since 1998 it is being funded by the EU commission for a 3-year period. EMQN promotes QA by two tools: by providing disease-specific best practice meetings (BPM) and EQA schemes. A typical BPM is focussed on one disease or group of related disorders. International experts report on the latest news of gene characterisation and function and the state-of-the-art techniques for mutation detection. Disease-specific EQA schemes are provided by experts in the field. DNA samples are sent out together with mock clinical referrals and a diagnostic question is asked. Written reports must be returned which are marked for genotyping and interpretation. So far, three BPMs have been held and six EQA schemes are in operation at various stages. Although mutation types and diagnostic techniques varied considerably between schemes, the overall technical performance showed a high diagnostic standard. Nevertheless, serious genotyping errors have been occurred in some schemes which underline the necessity of quality assurance efforts. The European Molecular Genetics Quality Network provides a necessary platform for the internal and external quality assurance of molecular genetic testing.

Underground Test Area Quality Assurance Project Plan Nevada National Security Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Irene Farnham

This Quality Assurance Project Plan (QAPP) provides the overall quality assurance (QA) program requirements and general quality practices to be applied to the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Underground Test Area (UGTA) Sub-Project (hereafter the Sub-Project) activities. The requirements in this QAPP are consistent with DOE Order 414.1C, Quality Assurance (DOE, 2005); U.S. Environmental Protection Agency (EPA) Guidance for Quality Assurance Project Plans for Modeling (EPA, 2002); and EPA Guidance on the Development, Evaluation, and Application of Environmental Models (EPA, 2009). The QAPP Revision 0 supersedes DOE--341, Underground Test Area Quality Assurancemore » Project Plan, Nevada Test Site, Nevada, Revision 4.« less

HANDBOOK: QUALITY ASSURANCE/QUALITY CONTROL (QA/QC) PROCEDURES FOR HAZARDOUS WASTE INCINERATION

EPA Science Inventory

Resource Conservation and Recovery Act regulations for hazardous waste incineration require trial burns by permit applicants. uality Assurance Project Plan (QAPjP) must accompany a trial burn plan with appropriate quality assurance/quality control procedures. uidance on the prepa...

Accuracy of prostate radiation therapy using a fiducial point-pair registration technique based on the computer-assisted portal imaging quality assurance program PIPSpro.

PubMed

Mermershtain, Wilmosh; Cohen, Yoram; Krutman, Yanai

2003-06-01

The aim of this study was to assess portal imaging for quality assurance of patient positioning in external beam radiotherapy. We present a retrospective study of the variability of patient position in the treatment of 34 prostate cancer patients who were treated with whole pelvic irradiation followed by arc therapy or boost field (Series I) and 25 patients treated by 'small' pelvic 4-field box technique (Series II). Weekly anteroposterior-posteranterior (AP-PA) and left-lateral portal images were compared to simulation films by using a fiducial point-pair registration technique based on the computer-assisted portal imaging quality assurance program PIPSpro, developed specifically for the verification of treatment positioning in radiation therapy. Series I consisted of 34 patients and 194 portal films (97 AP-PA and 97 left-lateral). Overirradiated (OA) and underirradiated (UA) areas were computed in terms of percentage of the reference field size. For the AP-PA portals, the average OA was 2.75% and average UA was 2.74%. For left-lateral portals, an average OA of 2.49% and UA of 2.78% were measured. Series II consisted of 25 patients and 194 portal films (98 AP-PA and 96 left-lateral). The average OA was 0.88% and average UA was 0.86% in AP-PA portals, and 1.03 and 0.82% for left-lateral portals, respectively. The accuracy of patient positioning in irradiation of prostate cancer in our institution is in the range of 2.69% for whole pelvic fields and 1.0% for small fields. We conclude that PIPSpro is an effective and useful tool for quality assurance in radiotherapy.

Now & Then: Ingrid Proctor-Fridia: Quality Assurance Representative.

ERIC Educational Resources Information Center

Barnes, Sue; Michalowicz, Karen Dee

1995-01-01

Describes the use of geometry now by a U.S. Department of Defense quality assurance representative and in ancient times by the Egyptians and Babylonians. Includes reproducible student worksheets on quality assurance. (MKR)

Federal Environmental Monitoring: Will the Bubble Burst?

ERIC Educational Resources Information Center

Miller, Stan

1978-01-01

A quality assurance program for environmental monitoring is identified as necesary for the collection of reliable, interchangeable, and legally defensible data. The article defines quality assurance and describes the EPA quality assurance program. (MA)

Redefining and expanding quality assurance.

PubMed

Robins, J L

1992-12-01

To meet the current standards of excellence necessary for blood establishments, we have learned from industry that a movement toward organization-wide quality assurance/total quality management must be made. Everyone in the organization must accept responsibility for participating in providing the highest quality products and services. Quality must be built into processes and design systems to support these quality processes. Quality assurance has been redefined to include a quality planning function described as the most effective way of designing quality into processes. A formalized quality planning process must be part of quality assurance. Continuous quality improvement has been identified as the strategy every blood establishment must support while striving for error-free processing as the long-term objective. The auditing process has been realigned to support and facilitate this same objective. Implementing organization-wide quality assurance/total quality management is one proven plan for guaranteeing the quality of the 20 million products that are transfused into 4 million patients each year and for moving toward the new order.

Quality-assurance plan for water-quality activities in the U.S. Geological Survey Washington Water Science Center

USGS Publications Warehouse

Conn, Kathleen E.; Huffman, Raegan L.; Barton, Cynthia

2017-05-08

In accordance with guidelines set forth by the Office of Water Quality in the Water Mission Area of the U.S. Geological Survey, a quality-assurance plan has been created for use by the Washington Water Science Center (WAWSC) in conducting water-quality activities. This qualityassurance plan documents the standards, policies, and procedures used by the WAWSC for activities related to the collection, processing, storage, analysis, and publication of water-quality data. The policies and procedures documented in this quality-assurance plan for water-quality activities complement the quality-assurance plans for surface-water and groundwater activities at the WAWSC.

Private sector delivery of health services in developing countries: a mixed-methods study on quality assurance in social franchises.

PubMed

Schlein, Karen; De La Cruz, Anna York; Gopalakrishnan, Tisha; Montagu, Dominic

2013-01-03

Across the developing world health care services are most often delivered in the private sector and social franchising has emerged, over the past decade, as an increasingly popular method of private sector health care delivery. Social franchising aims to strengthen business practices through economies of scale: branding clinics and purchasing drugs in bulk at wholesale prices. While quality is one of the established goals of social franchising, there is no published documentation of how quality levels might be set in the context of franchised private providers, nor what quality assurance measures can or should exist within social franchises. The aim of this study was to better understand the quality assurance systems currently utilized in social franchises, and to determine if there are shared standards for practice or quality outcomes that exist across programs. The study included three data sources and levels of investigation: 1) Self-reported program data; 2) Scoping telephone interviews; and 3) In-depth field interviews and clinic visits. Social Franchises conceive of quality assurance not as an independent activity, but rather as a goal that is incorporated into all areas of franchise operations, including recruitment, training, monitoring of provider performance, monitoring of client experience and the provision of feedback. These findings are the first evidence to support the 2002 conceptual model of social franchising which proposed that the assurance of quality was one of the three core goals of all social franchises. However, while quality is important to franchise programs, quality assurance systems overall are not reflective of the evidence to-date on quality measurement or quality improvement best practices. Future research in this area is needed to better understand the details of quality assurance systems as applied in social franchise programs, the process by which quality assurance becomes a part of the organizational culture, and the components of a quality assurance system that are most correlated with improved quality of clinical care for patients.

Private sector delivery of health services in developing countries: a mixed-methods study on quality assurance in social franchises

PubMed Central

2013-01-01

Background Across the developing world health care services are most often delivered in the private sector and social franchising has emerged, over the past decade, as an increasingly popular method of private sector health care delivery. Social franchising aims to strengthen business practices through economies of scale: branding clinics and purchasing drugs in bulk at wholesale prices. While quality is one of the established goals of social franchising, there is no published documentation of how quality levels might be set in the context of franchised private providers, nor what quality assurance measures can or should exist within social franchises. The aim of this study was to better understand the quality assurance systems currently utilized in social franchises, and to determine if there are shared standards for practice or quality outcomes that exist across programs. Methods The study included three data sources and levels of investigation: 1) Self-reported program data; 2) Scoping telephone interviews; and 3) In-depth field interviews and clinic visits. Results Social Franchises conceive of quality assurance not as an independent activity, but rather as a goal that is incorporated into all areas of franchise operations, including recruitment, training, monitoring of provider performance, monitoring of client experience and the provision of feedback. Conclusions These findings are the first evidence to support the 2002 conceptual model of social franchising which proposed that the assurance of quality was one of the three core goals of all social franchises. However, while quality is important to franchise programs, quality assurance systems overall are not reflective of the evidence to-date on quality measurement or quality improvement best practices. Future research in this area is needed to better understand the details of quality assurance systems as applied in social franchise programs, the process by which quality assurance becomes a part of the organizational culture, and the components of a quality assurance system that are most correlated with improved quality of clinical care for patients. PMID:23286899

Guidelines for preparing a quality assurance plan for district offices of the U.S. Geological Survey

USGS Publications Warehouse

Schroder, L.J.; Shampine, W.J.

1992-01-01

The U.S. Geological Survey has a policy that requires each District office to prepare a Quality Assurance Plan. This plan is a combination of a District's management principles and quality assurance processes. The guidelines presented in this report provide a framework or expanded outline that a District can use to prepare a plan. Parti- cular emphasis is given to a District's: (1) quality assurance policies; (2) organization and staff responsibilities; and (3) program and project planning. The guidelines address the 'how', 'what', and 'who' questions that need to be answered when a District Quality Assurance Plan is prepared.

7 CFR 652.7 - Quality assurance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Quality assurance. 652.7 Section 652.7 Agriculture... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.7 Quality assurance. (a) NRCS will review, in consultation with the Farm Service Agency, as appropriate, the quality...

78 FR 25445 - Federal Acquisition Regulation; Submission for OMB Review; Quality Assurance Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-01

...; Submission for OMB Review; Quality Assurance Requirements AGENCY: Department of Defense (DOD), General... collection requirement concerning quality assurance requirements. A notice was published in the Federal... before May 31, 2013. ADDRESSES: Submit comments identified by Information Collection 9000- 0077, Quality...

15 CFR 996.11 - Development of standards for a hydrographic product or class.

Code of Federal Regulations, 2010 CFR

2010-01-01

... COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The Quality... adopt or reject the standard as the NOAA Quality Assurance Program Standard for the particular...

Quality-assurance plan for the analysis of suspended sediment by the U.S. Geological Survey in Montana

USGS Publications Warehouse

Dodge, Kent A.; Lambing, John H.

2006-01-01

A quality-assurance plan has been developed for use by the sediment laboratory of the U.S. Geological Survey Montana Water Science Center in conducting activities related to the analysis of suspended sediment. The plan documents quality-assurance policies for sediment-laboratory certification, personnel responsibilities and training, documentation requirements, and laboratory safety. The plan also documents quality-assurance procedures related to laboratory equipment and supplies, sample management, sample analysis, analytical quality control, and data management.

Quality and security - They work together

NASA Technical Reports Server (NTRS)

Carr, Richard; Tynan, Marie; Davis, Russell

1991-01-01

This paper describes the importance of considering computer security as part of software quality assurance practice. The intended audience is primarily those professionals involved in the design, development, and quality assurance of software. Many issues are raised which point to the need ultimately for integration of quality assurance and computer security disciplines. To address some of the issues raised, the NASA Automated Information Security program is presented as a model which may be used for improving interactions between the quality assurance and computer security community of professionals.

15 CFR 996.32 - Appeals.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES Other Quality Assurance Program Matters § 996.32 Appeals. (a...

Systems Perspectives on External Quality Assurance: Implications for Micro-States

ERIC Educational Resources Information Center

Houston, Don; Maniku, Ahmed Ali

2005-01-01

Quality assurance in higher education is a mess: the "problem" of quality is embedded in complex sets of interacting issues that are of concern to many and varied stakeholders. Developing higher education systems that have responded to issues of quality through a "best practice" model of external quality assurance has produced…

Trading Quality across Borders: Colonial Discourse and International Quality Assurance Policies in Higher Education

ERIC Educational Resources Information Center

Blanco Ramírez, Gerardo

2014-01-01

Accountability and quality assurance have become central discourses in higher education policy throughout the world. However, accountability and quality assurance involve power and control. Practices and ideas about quality developed in the Global North are spreading rapidly across the Global South, leading to increased uniformity in the…

E-nursing documentation as a tool for quality assurance.

PubMed

Rajkovic, Vladislav; Sustersic, Olga; Rajkovic, Uros

2006-01-01

The article presents the results of a project with which we describe the reengineering of nursing documentation. Documentation in nursing is an efficient tool for ensuring quality health care and consequently quality patient treatment along the whole clinical path. We have taken into account the nursing process and patient treatment based on Henderson theoretical model of nursing that consists of 14 basic living activities. The model of new documentation enables tracing, transparency, selectivity, monitoring and analyses. All these factors lead to improvements of a health system as well as to improved safety of patients and members of nursing teams. Thus the documentation was developed for three health care segments: secondary and tertiary level, dispensaries and community health care. The new quality introduced to the documentation process by information and communication technology is presented by a database model and a software prototype for managing documentation.

WE-A-BRE-01: Debate: To Measure or Not to Measure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moran, J; Miften, M; Mihailidis, D

2014-06-15

Recent studies have highlighted some of the limitations of patient-specific pre-treatment IMRT QA measurements with respect to assessing plan deliverability. Pre-treatment QA measurements are frequently performed with detectors in phantoms that do not involve any patient heterogeneities or with an EPID without a phantom. Other techniques have been developed where measurement results are used to recalculate the patient-specific dose volume histograms. Measurements continue to play a fundamental role in understanding the initial and continued performance of treatment planning and delivery systems. Less attention has been focused on the role of computational techniques in a QA program such as calculation withmore » independent dose calculation algorithms or recalculation of the delivery with machine log files or EPID measurements. This session will explore the role of pre-treatment measurements compared to other methods such as computational and transit dosimetry techniques. Efficiency and practicality of the two approaches will also be presented and debated. The speakers will present a history of IMRT quality assurance and debate each other regarding which types of techniques are needed today and for future quality assurance. Examples will be shared of situations where overall quality needed to be assessed with calculation techniques in addition to measurements. Elements where measurements continue to be crucial such as for a thorough end-to-end test involving measurement will be discussed. Operational details that can reduce the gamma tool effectiveness and accuracy for patient-specific pre-treatment IMRT/VMAT QA will be described. Finally, a vision for the future of IMRT and VMAT plan QA will be discussed from a safety perspective. Learning Objectives: Understand the advantages and limitations of measurement and calculation approaches for pre-treatment measurements for IMRT and VMAT planning Learn about the elements of a balanced quality assurance program involving modulated techniques Learn how to use tools and techniques such as an end-to-end test to enhance your IMRT and VMAT QA program.« less

Implementation of quality management systems and progress towards accreditation of National Tuberculosis Reference Laboratories in Africa

PubMed Central

de Dieu Iragena, Jean; Kao, Kekeletso; Erni, Donatelle; Mekonen, Teferi

2017-01-01

Background Laboratory services are essential at all stages of the tuberculosis care cascade, from diagnosis and drug resistance testing to monitoring response to treatment. Enabling access to quality services is a challenge in low-resource settings. Implementation of a strong quality management system (QMS) and laboratory accreditation are key to improving patient care. Objectives The study objective was to determine the status of QMS implementation and progress towards accreditation of National Tuberculosis Reference Laboratories (NTRLs) in the African Region. Method An online questionnaire was administered to NTRL managers in 47 World Health Organization Regional Office for Africa member states in the region, between February and April 2015, regarding the knowledge of QMS tools and progress toward implementation to inform strategies for tuberculosis diagnostic services strengthening in the region. Results A total of 21 laboratories (43.0%) had received SLMTA/TB-SLMTA training, of which 10 had also used the Global Laboratory Initiative accreditation tool. However, only 36.7% of NTRLs had received a laboratory audit, a first step in quality improvement. Most NTRLs participated in acid-fast bacilli microscopy external quality assurance (95.8%), although external quality assurance for other techniques was lower (60.4% for first-line drug susceptibility testing, 25.0% for second-line drug susceptibility testing, and 22.9% for molecular testing). Barriers to accreditation included lack of training and accreditation programmes. Only 28.6% of NTRLs had developed strategic plans and budgets which included accreditation. Conclusion Good foundations are in place on the continent from which to scale up accreditation efforts. Laboratory audits should be conducted as a first step in developing quality improvement action plans. Political commitment and strong leadership are needed to drive accreditation efforts; advocacy will require clear evidence of patient impact and cost-benefit. PMID:28879161

Quality assurance and management in microelectronics companies: ISO 9000 versus Six Sigma

NASA Astrophysics Data System (ADS)

Lupan, Razvan; Kobi, Abdessamad; Robledo, Christian; Bacivarov, Ioan; Bacivarov, Angelica

2009-01-01

A strategy for the implementation of the Six Sigma method as an improvement solution for the ISO 9000:2000 Quality Standard is proposed. Our approach is focused on integrating the DMAIC cycle of the Six Sigma method with the PDCA process approach, highly recommended by the standard ISO 9000:2000. The Six Sigma steps applied to each part of the PDCA cycle are presented in detail, giving some tools and training examples. Based on this analysis the authors conclude that applying Six Sigma philosophy to the Quality Standard implementation process is the best way to achieve the optimal results in quality progress and therefore in customers satisfaction.

Cleanliness inspection tool for RSRM bond surfaces

NASA Technical Reports Server (NTRS)

Mattes, Robert A.

1995-01-01

Using optically stimulated electron emission (OSEE), Thiokol has monitored bond surfaces in process for contamination on the Redesigned Solid Rocket Motor (RSRM). This technique provides process control information to help assure bond surface quality and repeatability prior to bonding. This paper will describe OSEE theory of operation and the instrumentation implemented at Thiokol Corporation since 1987. Data from process hardware will be presented.

MyGfL: A Lifelong Learning Platform for Malaysian Society

ERIC Educational Resources Information Center

Arabee Abdul Salam, Zailan; Mansur, Azmi

2006-01-01

MyGfL which stands for Malaysian Grid for Learning is a One-Stop-Center for quality assured online learning content, tools and services with the aim to promote and support the lifelong learning agenda in Malaysia. It is a platform that enables anyone to learn, unlearn and relearn from anywhere at anytime through any web browser so as to accelerate…

A Total Quality Management Approach to Assurance of Learning in the Accounting Classroom: An Empirical Study

ERIC Educational Resources Information Center

Harvey, Mary Ellen; Eisner, Susan

2011-01-01

The research presented in this paper seeks to discern which combination of pedagogical tools most positively impact student learning of the introductory Accounting curriculum in the Principles of Accounting courses in a 4-year U.S. public college. This research topic is relevant because it helps address a quandary many instructors experience: how…

Technology Infusion of CodeSonar into the Space Network Ground Segment (RII07)

NASA Technical Reports Server (NTRS)

Benson, Markland

2008-01-01

The NASA Software Assurance Research Program (in part) performs studies as to the feasibility of technologies for improving the safety, quality, reliability, cost, and performance of NASA software. This study considers the application of commercial automated source code analysis tools to mission critical ground software that is in the operations and sustainment portion of the product lifecycle.

Analysing the Accreditation of Engineering Education in South Africa through Foucault's Panopticon and Governmentality Lenses

ERIC Educational Resources Information Center

Mutereko, Sybert

2018-01-01

Using Foucault's power concepts of the panopticon and governmentality as analytic and heuristic tools, this study reveals insights into how accreditation creates power networks in the quality assurance of higher education graduates in South Africa. The study draws on 11 in-depth interviews with academics from the Faculty of Engineering at a…

Development of a data entry auditing protocol and quality assurance for a tissue bank database.

PubMed

Khushi, Matloob; Carpenter, Jane E; Balleine, Rosemary L; Clarke, Christine L

2012-03-01

Human transcription error is an acknowledged risk when extracting information from paper records for entry into a database. For a tissue bank, it is critical that accurate data are provided to researchers with approved access to tissue bank material. The challenges of tissue bank data collection include manual extraction of data from complex medical reports that are accessed from a number of sources and that differ in style and layout. As a quality assurance measure, the Breast Cancer Tissue Bank (http:\\\\www.abctb.org.au) has implemented an auditing protocol and in order to efficiently execute the process, has developed an open source database plug-in tool (eAuditor) to assist in auditing of data held in our tissue bank database. Using eAuditor, we have identified that human entry errors range from 0.01% when entering donor's clinical follow-up details, to 0.53% when entering pathological details, highlighting the importance of an audit protocol tool such as eAuditor in a tissue bank database. eAuditor was developed and tested on the Caisis open source clinical-research database; however, it can be integrated in other databases where similar functionality is required.

A tool to include gamma analysis software into a quality assurance program.

PubMed

Agnew, Christina E; McGarry, Conor K

2016-03-01

To provide a tool to enable gamma analysis software algorithms to be included in a quality assurance (QA) program. Four image sets were created comprising two geometric images to independently test the distance to agreement (DTA) and dose difference (DD) elements of the gamma algorithm, a clinical step and shoot IMRT field and a clinical VMAT arc. The images were analysed using global and local gamma analysis with 2 in-house and 8 commercially available software encompassing 15 software versions. The effect of image resolution on gamma pass rates was also investigated. All but one software accurately calculated the gamma passing rate for the geometric images. Variation in global gamma passing rates of 1% at 3%/3mm and over 2% at 1%/1mm was measured between software and software versions with analysis of appropriately sampled images. This study provides a suite of test images and the gamma pass rates achieved for a selection of commercially available software. This image suite will enable validation of gamma analysis software within a QA program and provide a frame of reference by which to compare results reported in the literature from various manufacturers and software versions. Copyright © 2015. Published by Elsevier Ireland Ltd.

Quality Assurance in Continuing Professional Education. An Analysis.

ERIC Educational Resources Information Center

Tovey, Philip

Based on research conducted in and around universities in the United Kingdom, this book analyzes quality assurance in continuing professional education (CPE). An introduction provides a close look at the terms "quality,""quality assurance," and "CPE." Part I deals with context. Chapter 1 looks at theoretical…

10 CFR 72.142 - Quality assurance organization.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., or consultants, the work of establishing and executing the quality assurance program, but the... 10 Energy 2 2014-01-01 2014-01-01 false Quality assurance organization. 72.142 Section 72.142... SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality...

10 CFR 72.142 - Quality assurance organization.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., or consultants, the work of establishing and executing the quality assurance program, but the... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance organization. 72.142 Section 72.142... SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality...

10 CFR 72.142 - Quality assurance organization.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., or consultants, the work of establishing and executing the quality assurance program, but the... 10 Energy 2 2013-01-01 2013-01-01 false Quality assurance organization. 72.142 Section 72.142... SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality...

Data Interconnection Exploration

NASA Technical Reports Server (NTRS)

Iniguez, Alfredo Bravo

2011-01-01

This project involves innovating the way the Quality Assurance organization at the Jet Propulsion Laboratory (JPL) tracks the receiving inspection of JPL Critical Items (JCI) procured from suppliers. The Quality Assurance organization uses a Microsoft Access based front-end to enter items into an inspection queue. The current design has grown to be much more than was expected when the inspection queue system was created in 2007. The goal is to migrate to a web based solution that will allow the handling of more data, multiple input interfaces, and customizable display options. This has been achieved by implementing a divided tables scheme, the use of ColdFusion programming language, and the usage of Web 2.0 technologies such as AJAX and jQuery. These updates will allow for future expansion as well as the standardization of inspection queues for the Quality Assurance organization. When engineers and scientists order flight hardware, they cannot use it straight away. After a spacecraft or a satellite has been launched, it will be impossible to repair; therefore, the parts used must be inspected to make sure they are operating correctly and within the required specifications. The task of inspecting these JPL Critical Items (JCI) falls on the Quality Assurance organization. One of the tools the receiving inspection group uses is a database to maintain a queue of inspections that need to be done and of inspections that have been completed. The current Access interface has worked well but increased amounts of data, multiple input interfaces, and changes to how data is handled have made it necessary to seek a new way of organizing items for inspection. In addition, the different inspection groups have recently been merged and each has different ways of keeping track of inspection information. The ultimate goal is for the new group to have one shared inspection queue and website. To achieve this goal, I have been working with Ian Luczon of Procurement Quality Assurance and 3 Myers Hawkins, another intern, to not only create the new queue for receiving inspection but also a central web portal for the newly combined inspection group.

Peer feedback for examiner quality assurance on MRCGP International South Asia: a mixed methods study.

PubMed

Perera, D P; Andrades, Marie; Wass, Val

2017-12-08

The International Membership Examination (MRCGP[INT]) of the Royal College of General Practitioners UK is a unique collaboration between four South Asian countries with diverse cultures, epidemiology, clinical facilities and resources. In this setting good quality assurance is imperative to achieve acceptable standards of inter rater reliability. This study aims to explore the process of peer feedback for examiner quality assurance with regard to factors affecting the implementation and acceptance of the method. A sequential mixed methods approach was used based on focus group discussions with examiners (n = 12) and clinical examination convenors who acted as peer reviewers (n = 4). A questionnaire based on emerging themes and literature review was then completed by 20 examiners at the subsequent OSCE exam. Qualitative data were analysed using an iterative reflexive process. Quantitative data were integrated by interpretive analysis looking for convergence, complementarity or dissonance. The qualitative data helped understand the issues and informed the process of developing the questionnaire. The quantitative data allowed for further refining of issues, wider sampling of examiners and giving voice to different perspectives. Examiners stated specifically that peer feedback gave an opportunity for discussion, standardisation of judgments and improved discriminatory abilities. Interpersonal dynamics, hierarchy and perception of validity of feedback were major factors influencing acceptance of feedback. Examiners desired increased transparency, accountability and the opportunity for equal partnership within the process. The process was stressful for examiners and reviewers; however acceptance increased with increasing exposure to receiving feedback. The process could be refined to improve acceptability through scrupulous attention to training and selection of those giving feedback to improve the perceived validity of feedback and improved reviewer feedback skills to enable better interpersonal dynamics and a more equitable feedback process. It is important to highlight the role of quality assurance and peer feedback as a tool for continuous improvement and maintenance of standards to examiners during training. Examiner quality assurance using peer feedback was generally a successful and accepted process. The findings highlight areas for improvement and guide the path towards a model of feedback that is responsive to examiner views and cultural sensibilities.

Lot quality assurance sampling for monitoring immunization programmes: cost-efficient or quick and dirty?

PubMed

Sandiford, P

1993-09-01

In recent years Lot quality assurance sampling (LQAS), a method derived from production-line industry, has been advocated as an efficient means to evaluate the coverage rates achieved by child immunization programmes. This paper examines the assumptions on which LQAS is based and the effect that these assumptions have on its utility as a management tool. It shows that the attractively low sample sizes used in LQAS are achieved at the expense of specificity unless unrealistic assumptions are made about the distribution of coverage rates amongst the immunization programmes to which the method is applied. Although it is a very sensitive test and its negative predictive value is probably high in most settings, its specificity and positive predictive value are likely to be low. The implications of these strengths and weaknesses with regard to management decision-making are discussed.

Clustered lot quality assurance sampling: a tool to monitor immunization coverage rapidly during a national yellow fever and polio vaccination campaign in Cameroon, May 2009.

PubMed

Pezzoli, L; Tchio, R; Dzossa, A D; Ndjomo, S; Takeu, A; Anya, B; Ticha, J; Ronveaux, O; Lewis, R F

2012-01-01

We used the clustered lot quality assurance sampling (clustered-LQAS) technique to identify districts with low immunization coverage and guide mop-up actions during the last 4 days of a combined oral polio vaccine (OPV) and yellow fever (YF) vaccination campaign conducted in Cameroon in May 2009. We monitored 17 pre-selected districts at risk for low coverage. We designed LQAS plans to reject districts with YF vaccination coverage <90% and with OPV coverage <95%. In each lot the sample size was 50 (five clusters of 10) with decision values of 3 for assessing OPV and 7 for YF coverage. We 'rejected' 10 districts for low YF coverage and 14 for low OPV coverage. Hence we recommended a 2-day extension of the campaign. Clustered-LQAS proved to be useful in guiding the campaign vaccination strategy before the completion of the operations.

Quality assurance for the query and distribution systems of the RCSB Protein Data Bank

PubMed Central

Bluhm, Wolfgang F.; Beran, Bojan; Bi, Chunxiao; Dimitropoulos, Dimitris; Prlić, Andreas; Quinn, Gregory B.; Rose, Peter W.; Shah, Chaitali; Young, Jasmine; Yukich, Benjamin; Berman, Helen M.; Bourne, Philip E.

2011-01-01

The RCSB Protein Data Bank (RCSB PDB, www.pdb.org) is a key online resource for structural biology and related scientific disciplines. The website is used on average by 165 000 unique visitors per month, and more than 2000 other websites link to it. The amount and complexity of PDB data as well as the expectations on its usage are growing rapidly. Therefore, ensuring the reliability and robustness of the RCSB PDB query and distribution systems are crucially important and increasingly challenging. This article describes quality assurance for the RCSB PDB website at several distinct levels, including: (i) hardware redundancy and failover, (ii) testing protocols for weekly database updates, (iii) testing and release procedures for major software updates and (iv) miscellaneous monitoring and troubleshooting tools and practices. As such it provides suggestions for how other websites might be operated. Database URL: www.pdb.org PMID:21382834

The 2010 Canadian Cardiovascular Society guidelines for the diagnosis and management of heart failure update: Heart failure in ethnic minority populations, heart failure and pregnancy, disease management, and quality improvement/assurance programs

PubMed Central

Howlett, Jonathan G; McKelvie, Robert S; Costigan, Jeannine; Ducharme, Anique; Estrella-Holder, Estrellita; Ezekowitz, Justin A; Giannetti, Nadia; Haddad, Haissam; Heckman, George A; Herd, Anthony M; Isaac, Debra; Kouz, Simon; Leblanc, Kori; Liu, Peter; Mann, Elizabeth; Moe, Gordon W; O’Meara, Eileen; Rajda, Miroslav; Siu, Samuel; Stolee, Paul; Swiggum, Elizabeth; Zeiroth, Shelley

2010-01-01

Since 2006, the Canadian Cardiovascular Society heart failure (HF) guidelines have published annual focused updates for cardiovascular care providers. The 2010 Canadian Cardiovascular Society HF guidelines update focuses on an increasing issue in the western world – HF in ethnic minorities – and in an uncommon but important setting – the pregnant patient. Additionally, due to increasing attention recently given to the assessment of how care is delivered and measured, two critically important topics – disease management programs in HF and quality assurance – have been included. Both of these topics were written from a clinical perspective. It is hoped that the present update will become a useful tool for health care providers and planners in the ongoing evolution of care for HF patients in Canada. PMID:20386768

The Nuclear Energy Advanced Modeling and Simulation Enabling Computational Technologies FY09 Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diachin, L F; Garaizar, F X; Henson, V E

2009-10-12

In this document we report on the status of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Enabling Computational Technologies (ECT) effort. In particular, we provide the context for ECT In the broader NEAMS program and describe the three pillars of the ECT effort, namely, (1) tools and libraries, (2) software quality assurance, and (3) computational facility (computers, storage, etc) needs. We report on our FY09 deliverables to determine the needs of the integrated performance and safety codes (IPSCs) in these three areas and lay out the general plan for software quality assurance to meet the requirements of DOE andmore » the DOE Advanced Fuel Cycle Initiative (AFCI). We conclude with a brief description of our interactions with the Idaho National Laboratory computer center to determine what is needed to expand their role as a NEAMS user facility.« less

48 CFR 246.102 - Policy.

Code of Federal Regulations, 2010 CFR

2010-10-01

... DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE General 246.102 Policy. Departments and agencies shall also— (1) Develop and manage a systematic, cost-effective Government contract quality assurance program to ensure that contract performance conforms to specified requirements. Apply Government quality assurance...

Improving data quality and supervision of antiretroviral therapy sites in Malawi: an application of Lot Quality Assurance Sampling

PubMed Central

2012-01-01

Background High quality program data is critical for managing, monitoring, and evaluating national HIV treatment programs. By 2009, the Malawi Ministry of Health had initiated more than 270,000 patients on HIV treatment at 377 sites. Quarterly supervision of these antiretroviral therapy (ART) sites ensures high quality care, but the time currently dedicated to exhaustive record review and data cleaning detracts from other critical components. The exhaustive record review is unlikely to be sustainable long term because of the resources required and increasing number of patients on ART. This study quantifies the current levels of data quality and evaluates Lot Quality Assurance Sampling (LQAS) as a tool to prioritize sites with low data quality, thus lowering costs while maintaining sufficient quality for program monitoring and patient care. Methods In January 2010, a study team joined supervision teams at 19 sites purposely selected to reflect the variety of ART sites. During the exhaustive data review, the time allocated to data cleaning and data discrepancies were documented. The team then randomly sampled 76 records from each site, recording secondary outcomes and the time required for sampling. Results At the 19 sites, only 1.2% of records had discrepancies in patient outcomes and 0.4% in treatment regimen. However, data cleaning took 28.5 hours in total, suggesting that data cleaning for all 377 ART sites would require over 350 supervision-hours quarterly. The LQAS tool accurately identified the sites with the low data quality, reduced the time for data cleaning by 70%, and allowed for reporting on secondary outcomes. Conclusions Most sites maintained high quality records. In spite of this, data cleaning required significant amounts of time with little effect on program estimates of patient outcomes. LQAS conserves resources while maintaining sufficient data quality for program assessment and management to allow for quality patient care. PMID:22776745

Improving data quality and supervision of antiretroviral therapy sites in Malawi: an application of Lot Quality Assurance Sampling.

PubMed

Hedt-Gauthier, Bethany L; Tenthani, Lyson; Mitchell, Shira; Chimbwandira, Frank M; Makombe, Simon; Chirwa, Zengani; Schouten, Erik J; Pagano, Marcello; Jahn, Andreas

2012-07-09

High quality program data is critical for managing, monitoring, and evaluating national HIV treatment programs. By 2009, the Malawi Ministry of Health had initiated more than 270,000 patients on HIV treatment at 377 sites. Quarterly supervision of these antiretroviral therapy (ART) sites ensures high quality care, but the time currently dedicated to exhaustive record review and data cleaning detracts from other critical components. The exhaustive record review is unlikely to be sustainable long term because of the resources required and increasing number of patients on ART. This study quantifies the current levels of data quality and evaluates Lot Quality Assurance Sampling (LQAS) as a tool to prioritize sites with low data quality, thus lowering costs while maintaining sufficient quality for program monitoring and patient care. In January 2010, a study team joined supervision teams at 19 sites purposely selected to reflect the variety of ART sites. During the exhaustive data review, the time allocated to data cleaning and data discrepancies were documented. The team then randomly sampled 76 records from each site, recording secondary outcomes and the time required for sampling. At the 19 sites, only 1.2% of records had discrepancies in patient outcomes and 0.4% in treatment regimen. However, data cleaning took 28.5 hours in total, suggesting that data cleaning for all 377 ART sites would require over 350 supervision-hours quarterly. The LQAS tool accurately identified the sites with the low data quality, reduced the time for data cleaning by 70%, and allowed for reporting on secondary outcomes. Most sites maintained high quality records. In spite of this, data cleaning required significant amounts of time with little effect on program estimates of patient outcomes. LQAS conserves resources while maintaining sufficient data quality for program assessment and management to allow for quality patient care.

Quality Assurance for Essential Climate Variables

NASA Astrophysics Data System (ADS)

Folkert Boersma, K.; Muller, Jan-Peter

2015-04-01

Satellite data are of central interest to the QA4ECV project. Satellites have revolutionized the Earth's observation system of climate change and air quality over the past three decades, providing continuous data for the entire Earth. However, many users of these data are lost in the fog as to the quality of these satellite data. Because of this, the European Union expressed in its 2013 FP7 Space Research Call a need for reliable, traceable, and understandable quality information on satellite data records that could serve as a blueprint contribution to a future Copernicus Climate Change Service. The potential of satellite data to benefit climate change and air quality services is too great to be ignored. QA4ECV therefore bridges the gap between end-users of satellite data and the satellite data products. We are developing an internationally acceptable Quality Assurance (QA) framework that provides understandable and traceable quality information for satellite data used in climate and air quality services. Such a framework should deliver the historically linked long-term data sets that users need, in a format that they can readily use. QA4ECV has approached more than 150 users and suppliers of satellite data to collect their needs and expectations. The project will use their response as a guideline for developing user-friendly tools to obtain information on the completeness, accuracy, and fitness-for-purpose of the satellite datasets. QA4ECV collaborates with 4 joint FP7 Space projects in reaching out to scientists, policy makers, and other end-users of satellite data to improve understanding of the special challenges -and also opportunities- of working with satellite data for climate and air quality purposes. As a demonstration of its capacity, QA4ECV will generate multi-decadal climate data records for 3 atmospheric ECV precursors (nitrogen dioxide, formaldehyde, and carbon monoxide) and 3 land ECVs (albedo, leaf area index and absorbed photosynthetically active radiation), with full uncertainty metrics for every pixel. Multi-use tools and SI/community reference standards will be developed. But QA4ECV is not only about satellites. It is also about exploiting independent reference data obtained from in situ networks, and applying these data with the right, traceable methodologies for quality assurance of the satellite ECVs. The QA4ECV project started in January 2014, as a partnership between 17 research institutes from 7 different European countries working together for a period of 4 years. All QA4ECV partners are closely involved in projects improving, validating, and using satellite data. We hope that QA4ECV will be a major step forward in providing quality assured long-term climate data records that are relevant for policy and climate change assessments. A detailed description of the project can be found at http://qa4ecv.eu.

Ensuring quality: a key consideration in scaling-up HIV-related point-of-care testing programs

PubMed Central

Fonjungo, Peter N.; Osmanov, Saladin; Kuritsky, Joel; Ndihokubwayo, Jean Bosco; Bachanas, Pam; Peeling, Rosanna W.; Timperi, Ralph; Fine, Glenn; Stevens, Wendy; Habiyambere, Vincent; Nkengasong, John N.

2016-01-01

Objective: The objective of the WHO/US President's Emergency Plan for AIDS Relief consultation was to discuss innovative strategies, offer guidance, and develop a comprehensive policy framework for implementing quality-assured HIV-related point-of-care testing (POCT). Methods: The consultation was attended by representatives from international agencies (WHO, UNICEF, UNITAID, Clinton Health Access Initiative), United States Agency for International Development, Centers for Disease Control and Prevention/President's Emergency Plan for AIDS Relief Cooperative Agreement Partners, and experts from more than 25 countries, including policy makers, clinicians, laboratory experts, and program implementers. Main outcomes: There was strong consensus among all participants that ensuring access to quality of POCT represents one of the key challenges for the success of HIV prevention, treatment, and care programs. The following four strategies were recommended: implement a newly proposed concept of a sustainable quality assurance cycle that includes careful planning; definition of goals and targets; timely implementation; continuous monitoring; improvements and adjustments, where necessary; and a detailed evaluation; the importance of supporting a cadre of workers [e.g. volunteer quality corps (Q-Corps)] with the role to ensure that the quality assurance cycle is followed and sustained; implementation of the new strategy should be seen as a step-wise process, supported by development of appropriate policies and tools; and joint partnership under the leadership of the ministries of health to ensure sustainability of implementing novel approaches. Conclusion: The outcomes of this consultation have been well received by program implementers in the field. The recommendations also laid the groundwork for developing key policy and quality documents for the implementation of HIV-related POCT. PMID:26807969

Institutional Response to the Swedish Model of Quality Assurance.

ERIC Educational Resources Information Center

Nilsson, Karl-Axel; Wahlen, Staffan

2000-01-01

Evaluates the Swedish model of quality assurance of higher education by examining the response of institutions to 27 quality audits and 19 follow-up interviews. Discusses the relationship between top-down and bottom-up approaches to internal quality assurance and suggests that, with growing professionalization, more limited result-oriented audits…

76 FR 32333 - Approval and Promulgation of Air Quality Implementation Plans; Pennsylvania; Revision to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-06

... duration of the timing of quality assurance audits performed by the Pennsylvania Department of...) Program--Quality Assurance Protocol for the Safety Inspection Program in Non-I/M Counties AGENCY... quality assurance program for its motor vehicle inspection and maintenance program (I/M program...

Quality Assurance of Quality Assurance Agencies from an Asian Perspective: Regulation, Autonomy and Accountability

ERIC Educational Resources Information Center

Hou, Angela Yung-Chi; Ince, Martin; Tsai, Sandy; Chiang, Chung Lin

2015-01-01

As quality guardians of higher education, quality assurance agencies are required to guarantee the credibility of the review process and to ensure the objectivity and transparency of their decisions and recommendations. These agencies are therefore expected to use a range of internal and external approaches to prove the quality of their review…

Quality Control/Assurance in Post Secondary Education: An Outcomes Approach. AIR 1988 Annual Forum Paper.

ERIC Educational Resources Information Center

Birch, Derek W.; Johnson, F. Craig

A study was conducted using quality control and quality assurance models to examine student outcomes. The purpose was to investigate current quality control and quality assurance practices in six colleges, to evaluate the relationship between quantitative effectiveness measures and qualitative outcomes measure and to assess the readiness of each…

MO-E-217A-01: Contrast-Enhanced Spectral Mammography - Physical Aspects and QA.

PubMed

Yaffe, M; Hill, M

2012-06-01

To describe the current state of dual energy contrast-enhanced digital mammography, to discuss those aspects of its operation that require evaluation or monitoring and to propose elements of a program for quality assurance of such systems. The principles of dual-energy contrast imaging will be discussed and tools and techniques for assessment of performance will be described. Many of the elements affecting image quality and dose performance in digital mammography (eg noise, system linearity, consistency of x-ray output and detector performance, artifacts) remain important. In addition, the ability to register images can influence the resultant image quality. The maintenance of breast compression thickness during the imaging procedure and calibration of the system to allow quantification of iodine in the breast represent new challenges to quality assurance. CESM provides a means of acquiring new information regarding tumor angiogenesis and may reveal some cancers that will not be detectable on digital mammography. It may also better demonstrate the extent of disease. The medical physicist must understand the dependence of image quality on physical factors. Implementation of a relevant QA program will be required if the promise of this new modality is to be delivered. © 2012 American Association of Physicists in Medicine.

15 CFR 996.3 - Fees.

Code of Federal Regulations, 2012 CFR

2012-01-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES General § 996.3 Fees. NOAA may charge for its Quality Assurance Program activities...

15 CFR 996.3 - Fees.

Code of Federal Regulations, 2013 CFR

2013-01-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES General § 996.3 Fees. NOAA may charge for its Quality Assurance Program activities...

15 CFR 996.3 - Fees.

Code of Federal Regulations, 2014 CFR

2014-01-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES General § 996.3 Fees. NOAA may charge for its Quality Assurance Program activities...

15 CFR 996.3 - Fees.

Code of Federal Regulations, 2011 CFR

2011-01-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES General § 996.3 Fees. NOAA may charge for its Quality Assurance Program activities...

48 CFR 2453.246 - Quality Assurance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Quality Assurance. 2453.246 Section 2453.246 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT CLAUSES AND FORMS FORMS Prescription of Forms 2453.246 Quality Assurance. ...

48 CFR 46.406 - Foreign governments.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Foreign governments. 46... MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.406 Foreign governments. Government contract quality assurance performed for foreign governments or international agencies shall be...

48 CFR 46.406 - Foreign governments.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Foreign governments. 46... MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.406 Foreign governments. Government contract quality assurance performed for foreign governments or international agencies shall be...

48 CFR 46.406 - Foreign governments.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Foreign governments. 46... MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.406 Foreign governments. Government contract quality assurance performed for foreign governments or international agencies shall be...

48 CFR 46.406 - Foreign governments.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Foreign governments. 46... MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.406 Foreign governments. Government contract quality assurance performed for foreign governments or international agencies shall be...

48 CFR 46.406 - Foreign governments.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Foreign governments. 46... MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.406 Foreign governments. Government contract quality assurance performed for foreign governments or international agencies shall be...

15 CFR 996.3 - Fees.

Code of Federal Regulations, 2010 CFR

2010-01-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES General § 996.3 Fees. NOAA may charge for its Quality Assurance Program activities...

Quality Assurance and Improvement in Head and Neck Cancer Surgery: From Clinical Trials to National Healthcare Initiatives.

PubMed

Simon, Christian; Caballero, Carmela

2018-05-24

It is without question in the best interest of our patients, if we can identify ways to improve the quality of care we deliver to them. Great progress has been made within the last 25 years in terms of development and implementation of quality-assurance (QA) platforms and quality improvement programs for surgery in general, and within this context for head and neck surgery. As of now, we have successfully identified process indicators that impact outcome of our patients and the quality of care we deliver as surgeons. We have developed risk calculators to determine the risk for complications of individual surgical patients. We have created perioperative guidelines for complex head and neck procedures. We have in Europe and North America created audit registries that can gather and analyze data from institutions across the world to better understand which processes need change to obtain good outcomes and improve quality of care. QA platforms can be tested within the clearly defined environment of prospective clinical trials. If positive, such programs could be rolled out within national healthcare systems, if feasible. Testing quality programs in clinical trials could be a versatile tool to help head neck cancer patients benefit directly from such initiatives on a global level.

RAVEN Quality Assurance Activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cogliati, Joshua Joseph

2015-09-01

This report discusses the quality assurance activities needed to raise the Quality Level of Risk Analysis in a Virtual Environment (RAVEN) from Quality Level 3 to Quality Level 2. This report also describes the general RAVEN quality assurance activities. For improving the quality, reviews of code changes have been instituted, more parts of testing have been automated, and improved packaging has been created. For upgrading the quality level, requirements have been created and the workflow has been improved.

Quality Interaction Between Mission Assurance and Project Team Members

NASA Technical Reports Server (NTRS)

Kwong-Fu, Helenann H.; Wilson, Robert K.

2006-01-01

Mission Assurance independent assessments started during the development cycle and continued through post launch operations. In operations, Health and Safety of the Observatory is of utmost importance. Therefore, Mission Assurance must ensure requirements compliance and focus on process improvements required across the operational systems including new/modified products, tools, and procedures. The deployment of the interactive model involves three objectives: Team member Interaction, Good Root Cause Analysis Practices, and Risk Assessment to avoid reoccurrences. In applying this model, we use a metric based measurement process and was found to have the most significant effect, which points to the importance of focuses on a combination of root cause analysis and risk approaches allowing the engineers the ability to prioritize and quantify their corrective actions based on a well-defined set of root cause definitions (i.e. closure criteria for problem reports), success criteria and risk rating definitions.

NASA Aerospace Flight Battery Systems Program Update

NASA Technical Reports Server (NTRS)

Manzo, Michelle; ODonnell, Patricia

1997-01-01

The objectives of NASA's Aerospace Flight Battery Systems Program is to: develop, maintain and provide tools for the validation and assessment of aerospace battery technologies; accelerate the readiness of technology advances and provide infusion paths for emerging technologies; provide NASA projects with the required database and validation guidelines for technology selection of hardware and processes relating to aerospace batteries; disseminate validation and assessment tools, quality assurance, reliability, and availability information to the NASA and aerospace battery communities; and ensure that safe, reliable batteries are available for NASA's future missions.

NASA Electronic Parts and Packaging Program

NASA Technical Reports Server (NTRS)

Kayali, Sammy

2000-01-01

NEPP program objectives are to: (1) Access the reliability of newly available electronic parts and packaging technologies for usage on NASA projects through validations, assessments, and characterizations, and the development of test methods/tools; (2)Expedite infusion paths for advanced (emerging) electronic parts and packaging technologies by evaluations of readiness for manufacturability and project usage consideration; (3) Provide NASA projects with technology selection, application, and validation guidelines for electronic parts and packaging hardware and processes; nd (4) Retain and disseminate electronic parts and packaging quality assurance, reliability validations, tools, and availability information to the NASA community.

Quality assurance and quality improvement in U.S. clinical molecular genetic laboratories.

PubMed

Chen, Bin; Richards, C Sue; Wilson, Jean Amos; Lyon, Elaine

2011-04-01

A robust quality-assurance program is essential for laboratories that perform molecular genetic testing to maintain high-quality testing and be able to address challenges associated with performance or delivery of testing services as the use of molecular genetic tests continues to expand in clinical and public health practice. This unit discusses quality-assurance and quality-improvement considerations that are critical for molecular genetic testing performed for heritable diseases and conditions. Specific discussion is provided on applying regulatory standards and best practices in establishing/verifying test performance, ensuring quality of the total testing process, monitoring and maintaining personnel competency, and continuing quality improvement. The unit provides a practical reference for laboratory professionals to use in recognizing and addressing essential quality-assurance issues in human molecular genetic testing. It should also provide useful information for genetics researchers, trainees, and fellows in human genetics training programs, as well as others who are interested in quality assurance and quality improvement for molecular genetic testing. 2011 by John Wiley & Sons, Inc.

Quality Assurance Project Plan for Closure of the Central Facilities Area Sewage Treatment Plant Lagoon 3 and Land Application Area

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lewis, Michael G.

This quality assurance project plan describes the technical requirements and quality assurance activities of the environmental data collection/analyses operations to close Central Facilities Area Sewage treatment Plant Lagoon 3 and the land application area. It describes the organization and persons involved, the data quality objectives, the analytical procedures, and the specific quality control measures to be employed. All quality assurance project plan activities are implemented to determine whether the results of the sampling and monitoring performed are of the right type, quantity, and quality to satisfy the requirements for closing Lagoon 3 and the land application area.

48 CFR 246.406 - Foreign governments.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Foreign governments. 246..., DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.406 Foreign governments. (1) Quality assurance among North Atlantic Treaty Organization (NATO) countries. (i...

48 CFR 246.406 - Foreign governments.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Foreign governments. 246..., DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.406 Foreign governments. (1) Quality assurance among North Atlantic Treaty Organization (NATO) countries. (i...

48 CFR 246.406 - Foreign governments.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Foreign governments. 246..., DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.406 Foreign governments. (1) Quality assurance among North Atlantic Treaty Organization (NATO) countries. (i...

48 CFR 246.406 - Foreign governments.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Foreign governments. 246..., DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.406 Foreign governments. (1) Quality assurance among North Atlantic Treaty Organization (NATO) countries. (i...

48 CFR 246.406 - Foreign governments.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Foreign governments. 246..., DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.406 Foreign governments. (1) Quality assurance among North Atlantic Treaty Organization (NATO) countries. (i...

15 CFR 996.33 - Acceptance of program by non-Federal entities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Trade (Continued) NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES Other Quality Assurance Program Matters...

Savannah River Laboratory quality assurance manual. Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1985-02-01

The SRL quality assurance program is a management activity that verifies that the results of our research and development are adequate for their intended use and that our facilities function properly. The program is based on Savannah River Quality Assurance Plan (DPW-82-111-2, Rev 0) as applied through Quality Assurance Procedures and Divisional Plans (following section). The AED policy states that ''all activities shall be conducted to achieve a high quality of product and performance...'' The policy contains 18 considerations to be applied ''proportional to needs, based on the technical and professional judgment of responsible Du Pont employees.'' Quality is themore » responsibility of each individual and his line organization, as is safety. To ensure that quality is being considered for all SRL activities, all research programs are reviewed, and all facilities are assessed. These assessments and reviews are the nucleus of the Quality Assurance program.« less

The Fountain of Health: Bringing Seniors’ Mental Health Promotion into Clinical Practice

PubMed Central

Thoo, Vanessa; Freer, Janya; Cassidy, Keri-Leigh

2015-01-01

Background The Fountain of Health (FoH) initiative offers valuable evidence-based mental health knowledge and provides clinicians with evaluated tools for translating knowledge into practice, in order to reduce seniors’ risks of mental disorders, including dementia. Methods A presentation on mental health promotion and educational materials were disseminated to mental health clinicians including physicians and other allied health professionals either in-person or via tele-education through a provincial seniors’ mental health network. Measures included: 1) a tele-education quality evaluation form, 2) a knowledge transfer questionnaire, 3) a knowledge translation-to-practice evaluation tool, and 4) a quality assurance questionnaire. Results A total of 74 mental health clinicians received the FoH education session. There was a highly significant (p < .0001) difference in clinicians’ knowledge transfer questionnaire scores pre- and post-educational session. At a two-month follow-up, 19 (25.7%) participants completed a quality assurance questionnaire, with all 19 (100%) of respondents stating they would positively recommend the FoH information to colleagues and patients. Eleven (20.4%) translation-to-practice forms were also collected at this interval, tracking clinician use of the educational materials. Conclusions The use of a formalized network for knowledge transfer allows for education and evaluation of health-care practitioners in both acquisition of practical knowledge and subsequent clinical behavior change. PMID:26740830

Evaluating the Reliability and Impact of a Quality Assurance System for E-Learning Courseware

ERIC Educational Resources Information Center

Sung, Yao-Ting; Chang, Kuo-En; Yu, Wen-Cheng

2011-01-01

Assuring e-learning quality is of interest worldwide. This paper introduces the methods of e-learning courseware quality assurance (a quality certification system) adopted by the eLQSC (e-Learning Quality Service Centre) in Taiwan. A sequential/explanatory design with a mixed methodology was used to gather research data and conduct data analyses.…

Quality Assurance in Chinese Higher Education

ERIC Educational Resources Information Center

Li, Yuan

2010-01-01

Quality assurance has been integrated into the fabric of higher education in China, with the issue of quality in higher education--how to evaluate it and how to enhance it--now taking centre stage in Chinese higher education. In the past decade, the development of quality assurance in Chinese higher education has covered a broad spectrum of…

Poster - Thur Eve - 54: A software solution for ongoing DVH quality assurance in radiation therapy.

PubMed

Annis, S-L; Zeng, G; Wu, X; Macpherson, M

2012-07-01

A program has been developed in MATLAB for use in quality assurance of treatment planning of radiation therapy. It analyzes patient DVH files and compiles dose volume data for review, trending, comparison and analysis. Patient DVH files are exported from the Eclipse treatment planning system and saved according to treatment sites and date. Currently analysis is available for 4 treatment sites; Prostate, Prostate Bed, Lung, and Upper GI, with two functions for data report and analysis: patient-specific and organ-specific. The patient-specific function loads one patient DVH file and reports the user-specified dose volume data of organs and targets. These data can be compiled to an external file for a third party analysis. The organ-specific function extracts a requested dose volume of an organ from the DVH files of a patient group and reports the statistics over this population. A graphical user interface is utilized to select clinical sites, function and structures, and input user's requests. We have implemented this program in planning quality assurance at our center. The program has tracked the dosimetric improvement in GU sites after VMAT was implemented clinically. It has generated dose volume statistics for different groups of patients associated with technique or time range. This program allows reporting and statistical analysis of DVH files. It is an efficient tool for the planning quality control in radiation therapy. © 2012 American Association of Physicists in Medicine.

Current standards for infection control: audit assures compliance.

PubMed

Flanagan, Pauline

Having robust policies and procedures in place for infection control is fundamentally important. However, each organization has to go a step beyond this; evidence has to be provided that these policies and procedures are followed. As of 1 April 2009, with the introduction of the Care Quality Commission and The Health and Social Care Act 2008 Code of Practice for the NHS on the Prevention and Control of Healthcare-Associated Infections and Related Guidance, the assurance of robust infection control measures within any UK provider of health care became an even higher priority. Also, the commissioning of any service by the NHS must provide evidence that the provider has in place robust procedures for infection control. This article demonstrates how the clinical audit team at the Douglas Macmillan Hospice in North Staffordshire, UK, have used audit to assure high rates of compliance with the current national standards for infection control. Prior to the audit, hospice staff had assumed that the rates of compliance for infection control approached 100%. This article shows that a good quality audit tool can be used to identify areas of shortfall in infection control and the effectiveness of putting in place an action plan followed by re-audit.

Testing, Requirements, and Metrics

NASA Technical Reports Server (NTRS)

Rosenberg, Linda; Hyatt, Larry; Hammer, Theodore F.; Huffman, Lenore; Wilson, William

1998-01-01

The criticality of correct, complete, testable requirements is a fundamental tenet of software engineering. Also critical is complete requirements based testing of the final product. Modern tools for managing requirements allow new metrics to be used in support of both of these critical processes. Using these tools, potential problems with the quality of the requirements and the test plan can be identified early in the life cycle. Some of these quality factors include: ambiguous or incomplete requirements, poorly designed requirements databases, excessive or insufficient test cases, and incomplete linkage of tests to requirements. This paper discusses how metrics can be used to evaluate the quality of the requirements and test to avoid problems later. Requirements management and requirements based testing have always been critical in the implementation of high quality software systems. Recently, automated tools have become available to support requirements management. At NASA's Goddard Space Flight Center (GSFC), automated requirements management tools are being used on several large projects. The use of these tools opens the door to innovative uses of metrics in characterizing test plan quality and assessing overall testing risks. In support of these projects, the Software Assurance Technology Center (SATC) is working to develop and apply a metrics program that utilizes the information now available through the application of requirements management tools. Metrics based on this information provides real-time insight into the testing of requirements and these metrics assist the Project Quality Office in its testing oversight role. This paper discusses three facets of the SATC's efforts to evaluate the quality of the requirements and test plan early in the life cycle, thus preventing costly errors and time delays later.

MO-A-16A-01: QA Procedures and Metrics: In Search of QA Usability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sathiaseelan, V; Thomadsen, B

Radiation therapy has undergone considerable changes in the past two decades with a surge of new technology and treatment delivery methods. The complexity of radiation therapy treatments has increased and there has been increased awareness and publicity about the associated risks. In response, there has been proliferation of guidelines for medical physicists to adopt to ensure that treatments are delivered safely. Task Group recommendations are copious, and clinical physicists' hours are longer, stretched to various degrees between site planning and management, IT support, physics QA, and treatment planning responsibilities.Radiation oncology has many quality control practices in place to ensure themore » delivery of high-quality, safe treatments. Incident reporting systems have been developed to collect statistics about near miss events at many radiation oncology centers. However, tools are lacking to assess the impact of these various control measures. A recent effort to address this shortcoming is the work of Ford et al (2012) who recently published a methodology enumerating quality control quantification for measuring the effectiveness of safety barriers. Over 4000 near-miss incidents reported from 2 academic radiation oncology clinics were analyzed using quality control quantification, and a profile of the most effective quality control measures (metrics) was identified.There is a critical need to identify a QA metric to help the busy clinical physicists to focus their limited time and resources most effectively in order to minimize or eliminate errors in the radiation treatment delivery processes. In this symposium the usefulness of workflows and QA metrics to assure safe and high quality patient care will be explored.Two presentations will be given:Quality Metrics and Risk Management with High Risk Radiation Oncology ProceduresStrategies and metrics for quality management in the TG-100 Era Learning Objectives: Provide an overview and the need for QA usability metrics: Different cultures/practices affecting the effectiveness of methods and metrics. Show examples of quality assurance workflows, Statistical process control, that monitor the treatment planning and delivery process to identify errors. To learn to identify and prioritize risks and QA procedures in radiation oncology. Try to answer the question: Can a quality assurance program aided by quality assurance metrics help minimize errors and ensure safe treatment delivery. Should such metrics be institution specific.« less

48 CFR 46.402 - Government contract quality assurance at source.

Code of Federal Regulations, 2010 CFR

2010-10-01

... replacement of costly special packing and packaging; (e) Government inspection during contract performance is... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Government contract... ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.402...

48 CFR 46.402 - Government contract quality assurance at source.

Code of Federal Regulations, 2011 CFR

2011-10-01

... replacement of costly special packing and packaging; (e) Government inspection during contract performance is... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Government contract... ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.402...

48 CFR 2152.246-70 - Quality assurance requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Quality assurance... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CLAUSES AND FORMS PRECONTRACT PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 2152.246-70 Quality assurance...

48 CFR 2152.246-70 - Quality assurance requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Quality assurance... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CLAUSES AND FORMS PRECONTRACT PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 2152.246-70 Quality assurance...

48 CFR 2152.246-70 - Quality assurance requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Quality assurance... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CLAUSES AND FORMS PRECONTRACT PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 2152.246-70 Quality assurance...

48 CFR 2152.246-70 - Quality assurance requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Quality assurance... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CLAUSES AND FORMS PRECONTRACT PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 2152.246-70 Quality assurance...

48 CFR 2152.246-70 - Quality assurance requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Quality assurance... MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION CLAUSES AND FORMS PRECONTRACT PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 2152.246-70 Quality assurance...

Quality Assurance in a School of Dentistry: Getting Started.

ERIC Educational Resources Information Center

Guba, Christianne J.

1990-01-01

Steps in establishment of Indiana University School of Dentistry's quality assurance program included gathering existing information on quality assurance; ascertaining administrative support; appointing a committee; defining terms and setting goals; raising awareness and commitment; designing a patient satisfaction survey; undertaking a chart…

15 CFR 996.30 - Use of the NOAA emblem.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES Other Quality Assurance Program Matters § 996.30 Use of the...

QUALITY ASSURANCE IN RESEARCH LABORATORIES: RULES AND REASON

EPA Science Inventory

Quality Assurance in Research Laboratories: Rules and Reason

Ron Rogers, Quality Assurance and Records Manager, Environmental Carcinogenesis Division, NHEERL/ORD/US EPA, Research Triangle Park, NC, 27709

To anyone who has actively participated in research, as I have...

European Psychiatric Association (EPA) guidance on quality assurance in mental healthcare.

PubMed

Gaebel, W; Großimlinghaus, I; Heun, R; Janssen, B; Johnson, B; Kurimay, T; Montellano, P; Muijen, M; Munk-Jorgensen, P; Rössler, W; Ruggeri, M; Thornicroft, G; Zielasek, J

2015-03-01

To advance the quality of mental healthcare in Europe by developing guidance on implementing quality assurance. We performed a systematic literature search on quality assurance in mental healthcare and the 522 retrieved documents were evaluated by two independent reviewers (B.J. and J.Z.). Based on these evaluations, evidence tables were generated. As it was found that these did not cover all areas of mental healthcare, supplementary hand searches were performed for selected additional areas. Based on these findings, fifteen graded recommendations were developed and consented by the authors. Review by the EPA Guidance Committee and EPA Board led to two additional recommendations (on immigrant mental healthcare and parity of mental and physical healthcare funding). Although quality assurance (measures to keep a certain degree of quality), quality control and monitoring (applying quality indicators to the current degree of quality), and quality management (coordinated measures and activities with regard to quality) are conceptually distinct, in practice they are frequently used as if identical and hardly separable. There is a dearth of controlled trials addressing ways to optimize quality assurance in mental healthcare. Altogether, seventeen recommendations were developed addressing a range of aspects of quality assurance in mental healthcare, which appear usable across Europe. These were divided into recommendations about structures, processes and outcomes. Each recommendation was assigned to a hierarchical level of analysis (macro-, meso- and micro-level). There was a lack of evidence retrievable by a systematic literature search about quality assurance of mental healthcare. Therefore, only after further topics and search had been added it was possible to develop recommendations with mostly medium evidence levels. Evidence-based graded recommendations for quality assurance in mental healthcare were developed which should next be implemented and evaluated for feasibility and validity in some European countries. Due to the small evidence base identified corresponding to the practical obscurity of the concept and methods, a European research initiative is called for by the stakeholders represented in this Guidance to improve the educational, methodological and empirical basis for a future broad implementation of measures for quality assurance in European mental healthcare. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

RDD-100 and the systems engineering process

NASA Technical Reports Server (NTRS)

Averill, Robert D.

1994-01-01

An effective systems engineering approach applied through the project life cycle can help Langley produce a better product. This paper demonstrates how an enhanced systems engineering process for in-house flight projects assures that each system will achieve its goals with quality performance and within planned budgets and schedules. This paper also describes how the systems engineering process can be used in combination with available software tools.

The physiologic state of Escherichia coli O157:H7 does not affect its detection in two commercial real-time PCR-based tests

USDA-ARS?s Scientific Manuscript database

Multiplex real-time PCR detection of Escherichia coli O157:H7 is an efficient molecular tool with high sensitivity and specificity for meat safety and quality assurance in the beef industry. The Biocontrol GDS and the DuPont Qualicon BAX®-RT rapid detection systems are two commercial tests based on...

European Higher Education Area and the Introduction of a Quality Assurance Program in Greek Universities: Is Policy-Oriented Learning Present?

ERIC Educational Resources Information Center

Stamelos, George; Kavasakalis, Aggelos

2013-01-01

This paper aims to investigate the production (or not) of policy-oriented learning during the establishment and implementation of a specific policy program in the policy sub-system of the Greek university as well as the interpretation of the existence (or not) of policy-oriented learning. The theoretical tools were drawn mainly from the…

42 CFR 441.585 - Quality assurance system.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 4 2013-10-01 2013-10-01 false Quality assurance system. 441.585 Section 441.585 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... provides information about the provisions of quality improvement and assurance to each individual receiving...

42 CFR 441.585 - Quality assurance system.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 4 2014-10-01 2014-10-01 false Quality assurance system. 441.585 Section 441.585 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... provides information about the provisions of quality improvement and assurance to each individual receiving...

Academic Achievement Standards and Quality Assurance

ERIC Educational Resources Information Center

Sadler, D. Royce

2017-01-01

Quality assurance processes have been applied to many aspects of higher education, including teaching, learning and assessment. At least in the latter domain, quality assurance needs its fundamental tenets critically scrutinised. A common but inadequate approach has been to identify and promote learning environment changes "likely to…

Quality Assurance.

ERIC Educational Resources Information Center

Massachusetts Career Development Inst., Springfield.

This booklet is one of six texts from a workplace literacy curriculum designed to assist learners in facing the increased demands of the workplace. The booklet contains five sections that cover the following topics: (1) importance of reliability; (2) meaning of quality assurance; (3) historical development of quality assurance; (4) statistical…

APPLICATION OF SOFTWARE QUALITY ASSURANCE CONCEPTS AND PROCEDURES TO ENVIORNMENTAL RESEARCH INVOLVING SOFTWARE DEVELOPMENT

EPA Science Inventory

As EPA’s environmental research expands into new areas that involve the development of software, quality assurance concepts and procedures that were originally developed for environmental data collection may not be appropriate. Fortunately, software quality assurance is a ...

7 CFR 90.102 - Quality assurance review.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Quality assurance review. 90.102 Section 90.102 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) COMMODITY LABORATORY TESTING PROGRAMS INTRODUCTION Quality Assurance §...

Procedure 5 Quality Assurance Requirements For Vapor Phase Mercury Continuous Emissions Monitoring Systems And Sorbent Trap Monitoring Systems Used For Compliance Determination At Stationary Sources

EPA Pesticide Factsheets

Promulgated quality assurance Procedure 5 Quality Assurance Requirements For Vapor Phase Mercury Continuous Emissions Monitoring Systems And Sorbent Trap Monitoring Systems Used For Compliance Determination At Stationary Sources

Simulation of textile manufacturing processes for planning, scheduling, and quality control purposes

NASA Astrophysics Data System (ADS)

Cropper, A. E.; Wang, Z.

1995-08-01

Simulation, as a management information tool, has been applied to engineering manufacture and assembly operations. The application of the principles to textile manufacturing (fiber to fabric) is discussed. The particular problems and solutions in applying the simulation software package to the yarn production processes are discussed with an indication of how the software achieves the production schedule. The system appears to have application in planning, scheduling, and quality assurance. The latter being a result of the traceability possibilities through a process involving mixing and splitting of material.

Core components of a comprehensive quality assurance program in anatomic pathology.

PubMed

Nakhleh, Raouf E

2009-11-01

In this article the core components of a comprehensive quality assurance and improvement plan are outlined. Quality anatomic pathology work comes with focus on accurate, timely, and complete reports. A commitment to continuous quality improvement and a systems approach with a persistent effort helps to achieve this end. Departments should have a quality assurance and improvement plan that includes a risk assessment of real and potential problems facing the laboratory. The plan should also list the individuals responsible for carrying out the program with adequate resources, a defined timetable, and annual assessment for progress and future directions. Quality assurance monitors should address regulatory requirements and be organized by laboratory division (surgical pathology, cytology, etc) as well as 5 segments (preanalytic, analytic, postanalytic phases of the test cycle, turn-around-time, and customer satisfaction). Quality assurance data can also be used to evaluate individual pathologists using multiple parameters with peer group comparison.

The Academic Quality Handbook: Enhancing Higher Education in Universities and Further Education Colleges.

ERIC Educational Resources Information Center

McGhee, Patrick

This book is intended as an introduction to the management of quality assurance and enhancement in higher education, particularly in England. The text focuses on the relationship between institutional quality assurance and the auditing authority of the British Quality Assurance Agency for Higher Education. The chapters of part 1, "The Quality…

A New "ERA" of Women and Leadership: The Gendered Impact of Quality Assurance in Australian Higher Education

ERIC Educational Resources Information Center

Lipton, Briony

2015-01-01

Quality assurance policies and practices are critical to the performance of Australian universities both in terms of national funding and international prestige and are redefining the future of the academic enterprise. Quality assurance is not merely the systematic measurement of quality. It is a political and heuristic process, which has…

Still Balancing Improvement and Accountability? Developments in External Quality Assurance in the Nordic Countries 1996-2006

ERIC Educational Resources Information Center

Dano, Trine; Stensaker, Bjorn

2007-01-01

The role and function of external quality assurance is of great importance for the development of an internal quality culture in higher education. Research has shown that external quality assurance can stimulate but also create obstacles for institutional improvement. To strike a balance between improvement and accountability is, therefore, a key…

From Quality Assurance to Quality Practices: An Investigation of Strong Microcultures in Teaching and Learning

ERIC Educational Resources Information Center

Mårtensson, Katarina; Roxå, Torgny; Stensaker, Bjørn

2014-01-01

One of the main beliefs in quality assurance is that this activity--indirectly--will stimulate change in the work practices associated with teaching and learning in higher education. However, few studies have provided empirical evidence of the existence of such a link. Instead, quality assurance has created an unfortunate divide between formal…

Quality assurance of qualitative research: a review of the discourse

PubMed Central

2011-01-01

Background Increasing demand for qualitative research within global health has emerged alongside increasing demand for demonstration of quality of research, in line with the evidence-based model of medicine. In quantitative health sciences research, in particular clinical trials, there exist clear and widely-recognised guidelines for conducting quality assurance of research. However, no comparable guidelines exist for qualitative research and although there are long-standing debates on what constitutes 'quality' in qualitative research, the concept of 'quality assurance' has not been explored widely. In acknowledgement of this gap, we sought to review discourses around quality assurance of qualitative research, as a first step towards developing guidance. Methods A range of databases, journals and grey literature sources were searched, and papers were included if they explicitly addressed quality assurance within a qualitative paradigm. A meta-narrative approach was used to review and synthesise the literature. Results Among the 37 papers included in the review, two dominant narratives were interpreted from the literature, reflecting contrasting approaches to quality assurance. The first focuses on demonstrating quality within research outputs; the second focuses on principles for quality practice throughout the research process. The second narrative appears to offer an approach to quality assurance that befits the values of qualitative research, emphasising the need to consider quality throughout the research process. Conclusions The paper identifies the strengths of the approaches represented in each narrative and recommend these are brought together in the development of a flexible framework to help qualitative researchers to define, apply and demonstrate principles of quality in their research. PMID:22182674

Software Quality Assurance Audits Guidebooks

NASA Technical Reports Server (NTRS)

1990-01-01

The growth in cost and importance of software to NASA has caused NASA to address the improvement of software development across the agency. One of the products of this program is a series of guidebooks that define a NASA concept of the assurance processes that are used in software development. The Software Assurance Guidebook, NASA-GB-A201, issued in September, 1989, provides an overall picture of the NASA concepts and practices in software assurance. Second level guidebooks focus on specific activities that fall within the software assurance discipline, and provide more detailed information for the manager and/or practitioner. This is the second level Software Quality Assurance Audits Guidebook that describes software quality assurance audits in a way that is compatible with practices at NASA Centers.

Comparison of four commercial devices for RapidArc and sliding window IMRT QA

PubMed Central

Chandraraj, Varatharaj; Manickam, Ravikumar; Esquivel, Carlos; Supe, Sanjay S.; Papanikolaou, Nikos

2011-01-01

For intensity‐modulated radiation therapy, evaluation of the measured dose against the treatment planning calculated dose is essential in the context of patient‐specific quality assurance. The complexity of volumetric arc radiotherapy delivery attributed to its dynamic and synchronization nature require new methods and potentially new tools for the quality assurance of such techniques. In the present study, we evaluated and compared the dosimetric performance of EDR2 film and three other commercially available quality assurance devices: IBA I'MatriXX array, PTW Seven29 array and the Delta 4 array. The evaluation of these dosimetric systems was performed for RapidArc and IMRT deliveries using a Varian NovalisTX linear accelerator. The plans were generated using the Varian Eclipse treatment planning system. Our results showed that all four QA techniques yield equivalent results. All patient QAs passed our institutional clinical criteria of gamma index based on a 3% dose difference and 3 mm distance to agreement. In addition, the Bland‐Altman analysis was performed which showed that all the calculated gamma values of all three QA devices were within 5% from those of the film. The results showed that the four QA systems used in this patient‐specific IMRT QA analysis are equivalent. We concluded that the dosimetric systems under investigation can be used interchangeably for routine patient specific QA. PACS numbers: 87.55.Qr, 87.56.Fc

The Columbia River Protection Supplemental Technologies Quality Assurance Project Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fix, N. J.

The U.S. Department of Energy (DOE) has conducted interim groundwater remedial activities on the Hanford Site since the mid-1990s for several groundwater contamination plumes. DOE established the Columbia River Protection Supplemental Technologies Project (Technologies Project) in 2006 to evaluate alternative treatment technologies. The objectives for the technology project are as follows: develop a 300 Area polyphosphate treatability test to immobilize uranium, design and test infiltration of a phosphate/apatite technology for Sr-90 at 100-N, perform carbon tetrachloride and chloroform attenuation parameter studies, perform vadose zone chromium characterization and geochemistry studies, perform in situ biostimulation of chromium studies for a reducing barriermore » at 100-D, and perform a treatability test for phytoremediation for Sr-90 at 100-N. This document provides the quality assurance guidelines that will be followed by the Technologies Project. This Quality Assurance Project Plan is based on the quality assurance requirements of DOE Order 414.1C, Quality Assurance, and 10 CFR 830, Subpart A--Quality Assurance Requirements as delineated in Pacific Northwest National Laboratory’s Standards-Based Management System. In addition, the technology project is subject to the Environmental Protection Agency (EPA) Requirements for Quality Assurance Project Plans (EPA/240/B-01/003, QA/R-5). The Hanford Analytical Services Quality Assurance Requirements Documents (HASQARD, DOE/RL-96-68) apply to portions of this project and to the subcontractors. HASQARD requirements are discussed within applicable sections of this plan.« less

SWiFT Software Quality Assurance Plan.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berg, Jonathan Charles

This document describes the software development practice areas and processes which contribute to the ability of SWiFT software developers to provide quality software. These processes are designed to satisfy the requirements set forth by the Sandia Software Quality Assurance Program (SSQAP). APPROVALS SWiFT Software Quality Assurance Plan (SAND2016-0765) approved by: Department Manager SWiFT Site Lead Dave Minster (6121) Date Jonathan White (6121) Date SWiFT Controls Engineer Jonathan Berg (6121) Date CHANGE HISTORY Issue Date Originator(s) Description A 2016/01/27 Jon Berg (06121) Initial release of the SWiFT Software Quality Assurance Plan

Photovoltaic system criteria documents. Volume 2: Quality assurance criteria for photovoltaic applications

NASA Technical Reports Server (NTRS)

Koenig, John C.; Billitti, Joseph W.; Tallon, John M.

1979-01-01

Quality assurance criteria are described for manufacturers and installers of solar photovoltaic tests and applications. Quality oriented activities are outlined to be pursued by the contractor/subcontractor to assure the physical and operational quality of equipment produced is included. In the broad sense, guidelines are provided for establishing a QA organization if none exists. Mainly, criteria is provided to be considered in any PV quality assurance plan selected as appropriate by the responsible Field Center. A framework is established for a systematic approach to ensure that photovoltaic tests and applications are constructed in a timely and cost effective manner.

[Compatibility of different quality control systems].

PubMed

Invernizzi, Enrico

2002-01-01

Management of the good laboratory practice (GLP) quality system presupposes its linking to a basic recognized and approved quality system, from which it can draw on management procedures common to all quality systems, such as the ISO 9000 set of norms. A quality system organized in this way can also be integrated with other dedicated quality systems, or parts of them, to obtain principles or management procedures for specific topics. The aim of this organization is to set up a reliable, recognized quality system compatible with the principles of GLP and other quality management systems, which provides users with a simplified set of easily accessible management tools and answers. The organization of this quality system is set out in the quality assurance programme, which is actually the document in which the test facility incorporates the GLP principles into its own quality organization.

Quality Assurance in Online Content Literacy Methods Courses

ERIC Educational Resources Information Center

Marsh, Josephine P.; Lammers, Jayne C.; Alvermann, Donna E.

2012-01-01

As institutions offer more online courses in their teacher certification and literacy master's programs, research is needed to address issues of quality assurance in online instruction. This multicase study analyzes qualitatively elements for addressing quality assurance of the implementation of an online content literacy teacher education course…

10 CFR 71.101 - Quality assurance requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... quality assurance actions related to control of the physical characteristics and quality of the material... through 71.137 and satisfying any specific provisions that are applicable to the licensee's activities... assurance requirement's importance to safety. (c) Approval of program. (1) Before the use of any package for...

30 CFR 7.7 - Quality assurance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Quality assurance. 7.7 Section 7.7 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY General § 7.7 Quality assurance. Applicants granted...

40 CFR Appendix C to Part 61 - Quality Assurance Procedures

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Quality Assurance Procedures C Appendix C to Part 61 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...—Quality Assurance Procedures Procedure 1—Determination of Adequate Chromatographic Peak Resolution In this...

Quality Assurance in Engineering Education: Comparison of Accreditation Schemes and ISO 9001.

ERIC Educational Resources Information Center

Karapetrovic, Stanislav; Rajamani, Divakar; Willborn, Walter

1998-01-01

Outlines quality assurance schemes for distance-education technologies that are based on the ISO 9000 family of international quality-assurance standards. Argues that engineering faculties can establish such systems on the basis of and integrated with accreditation schemes. Contains 34 references. (DDR)

Quantitative Analysis Tools and Digital Phantoms for Deformable Image Registration Quality Assurance.

PubMed

Kim, Haksoo; Park, Samuel B; Monroe, James I; Traughber, Bryan J; Zheng, Yiran; Lo, Simon S; Yao, Min; Mansur, David; Ellis, Rodney; Machtay, Mitchell; Sohn, Jason W

2015-08-01

This article proposes quantitative analysis tools and digital phantoms to quantify intrinsic errors of deformable image registration (DIR) systems and establish quality assurance (QA) procedures for clinical use of DIR systems utilizing local and global error analysis methods with clinically realistic digital image phantoms. Landmark-based image registration verifications are suitable only for images with significant feature points. To address this shortfall, we adapted a deformation vector field (DVF) comparison approach with new analysis techniques to quantify the results. Digital image phantoms are derived from data sets of actual patient images (a reference image set, R, a test image set, T). Image sets from the same patient taken at different times are registered with deformable methods producing a reference DVFref. Applying DVFref to the original reference image deforms T into a new image R'. The data set, R', T, and DVFref, is from a realistic truth set and therefore can be used to analyze any DIR system and expose intrinsic errors by comparing DVFref and DVFtest. For quantitative error analysis, calculating and delineating differences between DVFs, 2 methods were used, (1) a local error analysis tool that displays deformation error magnitudes with color mapping on each image slice and (2) a global error analysis tool that calculates a deformation error histogram, which describes a cumulative probability function of errors for each anatomical structure. Three digital image phantoms were generated from three patients with a head and neck, a lung and a liver cancer. The DIR QA was evaluated using the case with head and neck. © The Author(s) 2014.

Prevention and management of "do not return" notices: a quality improvement process for supplemental staffing nursing agencies.

PubMed

Ade-Oshifogun, Jochebed Bosede; Dufelmeier, Thaddeus

2012-01-01

This article describes a quality improvement process for "do not return" (DNR) notices for healthcare supplemental staffing agencies and healthcare facilities that use them. It is imperative that supplemental staffing agencies partner with healthcare facilities in assuring the quality of supplemental staff. Although supplemental staffing agencies attempt to ensure quality staffing, supplemental staff are sometimes subjectively evaluated by healthcare facilities as "DNR." The objective of this article is to describe a quality improvement process to prevent and manage "DNR" within healthcare organizations. We developed a curriculum and accompanying evaluation tool by adapting Rampersad's problem-solving discipline approach: (a) definition of area(s) for improvement; (b) identification of all possible causes; (c) development of an action plan; (d) implementation of the action plan; (e) evaluation for program improvement; and (f) standardization of the process. Face and content validity of the evaluation tool was ascertained by input from a panel of experienced supplemental staff and nursing faculty. This curriculum and its evaluation tool will have practical implications for supplemental staffing agencies and healthcare facilities in reducing "DNR" rates and in meeting certification/accreditation requirements. Further work is needed to translate this process into future research. © 2012 Wiley Periodicals, Inc.

A Descriptive Analysis of the Organizational Climate for Quality at the National Naval Medical Center

DTIC Science & Technology

1991-12-01

Training 40 4.4 Employee Recognition and Perfornance Measurement 20 4.5 Employee Well-Being and Morale 20 5.0 Quality Assurance of Products and Services 150...and Services 25 5.4 Quality Assessment 15 5.5 Documentation 10 5.6 Quality Assurance , Quality Assessment and Quality Improvement of Support Services ...those of industry averages and industry leaders. 28 The Quality Assurance of Products and Services category examines the systematic approaches used by

Understanding Quality Assurance: A Cross Country Case Study

ERIC Educational Resources Information Center

Choon Boey Lim, Fion

2008-01-01

Purpose: The purpose of this paper is to examine the level of understanding between an Australian university and its offshore partner institution, on quality assurance. It attempts to highlight the dynamics of quality assurance policy implementation within and across institutions for an offshore degree. Design/methodology/approach: The study used…

Quality Assurance Reconsidered: A Case Study

ERIC Educational Resources Information Center

Gynnild, Vidar

2007-01-01

This article examines an external evaluation of the quality assurance system at the Norwegian University of Science and Technology (NTNU) conducted by The Norwegian Agency for Quality Assurance in Higher Education (NOKUT). The external audit report along with internal reports provided by the seven faculties of the university served as the major…

The Quality Assurance System for Ontario Postsecondary Education: 2010-2014

ERIC Educational Resources Information Center

Liu, Qin

2015-01-01

The period of 2010 to 2014 marked a relatively stable stage in the evolving quality assurance system for Ontario postsecondary education, particularly following massive changes after 2000. The current system consists of three frameworks overseen respectively by three quality assurance agencies--the Ontario Universities Council on Quality…

15 CFR 996.10 - Submission and selection of hydrographic products for the development of standards and compliance...

Code of Federal Regulations, 2011 CFR

2011-01-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC...: Hydrographic Product Quality Assurance Program, Office of Coast Survey, NOAA, 1315 East West Highway, Silver...

15 CFR 996.10 - Submission and selection of hydrographic products for the development of standards and compliance...

Code of Federal Regulations, 2012 CFR

2012-01-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC...: Hydrographic Product Quality Assurance Program, Office of Coast Survey, NOAA, 1315 East West Highway, Silver...

15 CFR 996.10 - Submission and selection of hydrographic products for the development of standards and compliance...

Code of Federal Regulations, 2013 CFR

2013-01-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC...: Hydrographic Product Quality Assurance Program, Office of Coast Survey, NOAA, 1315 East West Highway, Silver...

15 CFR 996.10 - Submission and selection of hydrographic products for the development of standards and compliance...

Code of Federal Regulations, 2014 CFR

2014-01-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC...: Hydrographic Product Quality Assurance Program, Office of Coast Survey, NOAA, 1315 East West Highway, Silver...

Policy of Quality Assurance in Hong Kong Preschools

ERIC Educational Resources Information Center

Dora, Ho Choi-wa

2007-01-01

This article discusses the sources, processes and impact of the quality assurance policy implemented in Hong Kong preschools. Regarded as a sort of policy alignment between the subsystems of pre-primary, primary and secondary education, the introduction of a quality assurance policy has been directly and indirectly transforming the settlements in…

Knowledge, Power and Meanings Shaping Quality Assurance in Higher Education: A Systemic Critique

ERIC Educational Resources Information Center

Houston, Don; Paewai, Shelley

2013-01-01

Internationally, quality assurance schemes persist despite long-standing dissatisfaction and critique of their impact and outcomes. Adopting a critical systems perspective, the article explores the relationships between the knowledge, power and meanings that stakeholder groups bring to the design and implementation of quality assurance systems.…

Quality Assurance in Sub-Saharan Africa

ERIC Educational Resources Information Center

Materu, Peter; Righetti, Petra

2010-01-01

This article assesses the status and practice of higher education quality assurance in sub-Saharan Africa, focusing on degree-granting tertiary institutions. A main finding is that structured national-level quality assurance processes in African higher education are a very recent phenomenon and that most countries face major capacity constraints.…

Radiographic Film Processing Quality Assurance: A Self-Teaching Workbook. Quality Assurance Series.

ERIC Educational Resources Information Center

Goldman, Lee W.

This workbook has been designed for use in conjunction with the manual, "Photographic Quality Assurance in Diagnostic Radiology, Nuclear Medicine and Radiation Therapy." Presented are several typical problems arising from the existence of variability and fluctuations in the automatic processing of radiographs, which unless corrected, can…

30 CFR 14.8 - Quality assurance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Quality assurance. 14.8 Section 14.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... Quality assurance. Applicants granted an approval or an extension of approval under this Part must: (a) In...

30 CFR 15.8 - Quality assurance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Quality assurance. 15.8 Section 15.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... § 15.8 Quality assurance. (a) Applicants granted an approval or an extension of approval under this...

38 CFR 17.508 - Access to quality assurance records and documents within the agency.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2014-07-01 2014-07-01 false Access to quality assurance records and documents within the agency. 17.508 Section 17.508 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Confidentiality of Healthcare Quality Assurance Review...

38 CFR 17.508 - Access to quality assurance records and documents within the agency.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2011-07-01 2011-07-01 false Access to quality assurance records and documents within the agency. 17.508 Section 17.508 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Confidentiality of Healthcare Quality Assurance Review...

38 CFR 17.508 - Access to quality assurance records and documents within the agency.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Access to quality assurance records and documents within the agency. 17.508 Section 17.508 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Confidentiality of Healthcare Quality Assurance Review...

38 CFR 17.508 - Access to quality assurance records and documents within the agency.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2012-07-01 2012-07-01 false Access to quality assurance records and documents within the agency. 17.508 Section 17.508 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Confidentiality of Healthcare Quality Assurance Review...

38 CFR 17.508 - Access to quality assurance records and documents within the agency.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2013-07-01 2013-07-01 false Access to quality assurance records and documents within the agency. 17.508 Section 17.508 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Confidentiality of Healthcare Quality Assurance Review...

15 CFR 996.12 - Development of standards compliance tests for a hydrographic product or class.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The Quality Assurance Program for Hydrographic Products § 996.12 Development of standards compliance tests for...

15 CFR 996.10 - Submission and selection of hydrographic products for the development of standards and compliance...

Code of Federal Regulations, 2010 CFR

2010-01-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The Quality Assurance Program for Hydrographic Products § 996.10 Submission and...

Exploring Quality Assurance in Sixth Form Colleges

ERIC Educational Resources Information Center

Stoten, David William

2012-01-01

Purpose: This paper aims to focus on the changing nature of quality assurance systems within the sixth form college sector. Design/methodology/approach: Ten sixth form colleges were surveyed across England and staff from varying levels within college hierarchies questioned about how quality assurance systems were implemented. Research involved…

Quality Assurance Strategies in Higher Education: The Case of Ghanaian Polytechnics

ERIC Educational Resources Information Center

Swanzy, Patrick; Potts, Anthony

2017-01-01

This study investigated the internal quality assurance strategies Ghanaian polytechnics enacted in order to improve graduate outcomes. A qualitative methodological approach via in-depth interviewing of twenty key informants and document analysis was used to establish how polytechnics in Ghana addressed problematic situations in quality assurance.…

78 FR 28987 - Revisions to Transportation Safety Requirements and Harmonization With International Atomic...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-16

... Transportation Requirements; Establishing Quality Assurance Programs for Packaging Used in Transport of... would make the regulation of quality assurance programs more efficient by allowing changes that do not change quality assurance approval holder commitments to be made without prior NRC approval, and extending...

Partners | Integrated Energy Solutions | NREL

Science.gov Websites

Develops Off-Grid Energy Access through Quality Assurance Framework for Mini-Grids NREL has teamed with the Africa to develop a Quality Assurance Framework for isolated mini-grids. NREL Enhances Energy Resiliency Partnership Develops Off-Grid Energy Access through Quality Assurance Framework for Mini-Grids NREL has teamed

NREL Partnership Develops Off-Grid Energy Access through Quality Assurance

Science.gov Websites

Framework for Mini-Grids | Integrated Energy Solutions | NREL Partnership Develops Off-Grid Energy Access through Quality Assurance Framework for Mini-Grids NREL Partnership Develops Off-Grid Energy Access through Quality Assurance Framework for Mini-Grids NREL has teamed with the Global Lighting

Monitoring and Assuring the Quality of Digital Aerial Data

NASA Technical Reports Server (NTRS)

Christopherson, Jon

2007-01-01

This viewgraph presentation explains the USGS plan for monitoring and assuring the quality of digital aerial data. The contents include: 1) History of USGS Aerial Imaging Involvement; 2) USGS Research and Results; 3) Outline of USGS Quality Assurance Plan; 4) Other areas of Interest; and 5) Summary

Mapping the Quality Assurance of Teaching and Learning in Higher Education: The Emergence of a Specialty?

ERIC Educational Resources Information Center

Steinhardt, Isabel; Schneijderberg, Christian; Götze, Nicolai; Baumann, Janosch; Krücken, Georg

2017-01-01

The quality assurance of teaching and learning as part of universities' governance and quality management has become a major subject in higher education and higher education politics worldwide. In addition, increasing academic attention has been paid to the quality assurance of teaching and learning, as is evident from the growing number of…

Feasibility study of using statistical process control to customized quality assurance in proton therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rah, Jeong-Eun; Oh, Do Hoon; Shin, Dongho

Purpose: To evaluate and improve the reliability of proton quality assurance (QA) processes and, to provide an optimal customized tolerance level using the statistical process control (SPC) methodology. Methods: The authors investigated the consistency check of dose per monitor unit (D/MU) and range in proton beams to see whether it was within the tolerance level of the daily QA process. This study analyzed the difference between the measured and calculated ranges along the central axis to improve the patient-specific QA process in proton beams by using process capability indices. Results: The authors established a customized tolerance level of ±2% formore » D/MU and ±0.5 mm for beam range in the daily proton QA process. In the authors’ analysis of the process capability indices, the patient-specific range measurements were capable of a specification limit of ±2% in clinical plans. Conclusions: SPC methodology is a useful tool for customizing the optimal QA tolerance levels and improving the quality of proton machine maintenance, treatment delivery, and ultimately patient safety.« less

Development and implementation of a comprehensive quality assurance program at a community endoscopy facility.

PubMed

Hilsden, Robert Jay; Rostom, Alaa; Dubé, Catherine; Pontifex, Darlene; McGregor, S Elizabeth; Bridges, Ronald J

2011-10-01

Quality assurance (QA) is a process that includes the systematic evaluation of a service, institution of improvements and ongoing evaluation to ensure that effective changes were made. QA is a fundamental component of any organized colorectal cancer screening program. However, it should play an equally important role in opportunistic screening. Establishing the processes and procedures for a comprehensive QA program can be a daunting proposition for an endoscopy unit. The present article describes the steps taken to establish a QA program at the Forzani & MacPhail Colon Cancer Screening Centre (Calgary, Alberta) - a colorectal cancer screening centre and nonhospital endoscopy unit that is dedicated to providing colorectal cancer screening-related colonoscopies. Lessons drawn from the authors' experience may help others develop their own initiatives. The Global Rating Scale, a quality assessment and improvement tool developed for the gastrointestinal endoscopy services of the United Kingdom's National Health Service, was used as the framework to develop the QA program. QA activities include monitoring the patient experience through surveys, creating endoscopist report cards on colonoscopy performance, tracking and evaluating adverse events and monitoring wait times.

Characterizing SWCNT Dispersion in Polymer Composites

NASA Technical Reports Server (NTRS)

Lillehei, Peter T.; Kim, Jae-Woo; Gibbons, Luke; Park, Cheol

2007-01-01

The new wave of single wall carbon nanotube (SWCNT) infused composites will yield structurally sound multifunctional nanomaterials. The SWCNT network requires thorough dispersion within the polymer matrix in order to maximize the benefits of the nanomaterial. However, before any nanomaterials can be used in aerospace applications a means of quality assurance and quality control must be certified. Quality control certification requires a means of quantification, however, the measurement protocol mandates a method of seeing the dispersion first. We describe here the new tools that we have developed and implemented to first be able to see carbon nanotubes in polymers and second to measure or quantify the dispersion of the nanotubes.

Modernization of software quality assurance

NASA Technical Reports Server (NTRS)

Bhaumik, Gokul

1988-01-01

The customers satisfaction depends not only on functional performance, it also depends on the quality characteristics of the software products. An examination of this quality aspect of software products will provide a clear, well defined framework for quality assurance functions, which improve the life-cycle activities of software development. Software developers must be aware of the following aspects which have been expressed by many quality experts: quality cannot be added on; the level of quality built into a program is a function of the quality attributes employed during the development process; and finally, quality must be managed. These concepts have guided our development of the following definition for a Software Quality Assurance function: Software Quality Assurance is a formal, planned approach of actions designed to evaluate the degree of an identifiable set of quality attributes present in all software systems and their products. This paper is an explanation of how this definition was developed and how it is used.

Quality-assurance plan for water-resources activities of the U.S. Geological Survey in Idaho

USGS Publications Warehouse

Packard, F.A.

1996-01-01

To ensure continued confidence in its products, the Water Resources Division of the U.S. Geological Survey implemented a policy that all its scientific work be performed in accordance with a centrally managed quality-assurance program. This report establishes and documents a formal policy for current (1995) quality assurance within the Idaho District of the U.S. Geological Survey. Quality assurance is formalized by describing district organization and operational responsibilities, documenting the district quality-assurance policies, and describing district functions. The districts conducts its work through offices in Boise, Idaho Falls, Twin Falls, Sandpoint, and at the Idaho National Engineering Laboratory. Data-collection programs and interpretive studies are conducted by two operating units, and operational and technical assistance is provided by three support units: (1) Administrative Services advisors provide guidance on various personnel issues and budget functions, (2) computer and reports advisors provide guidance in their fields, and (3) discipline specialists provide technical advice and assistance to the district and to chiefs of various projects. The district's quality-assurance plan is based on an overall policy that provides a framework for defining the precision and accuracy of collected data. The plan is supported by a series of quality-assurance policy statements that describe responsibilities for specific operations in the district's program. The operations are program planning; project planning; project implementation; review and remediation; data collection; equipment calibration and maintenance; data processing and storage; data analysis, synthesis, and interpretation; report preparation and processing; and training. Activities of the district are systematically conducted under a hierarchy of supervision an management that is designed to ensure conformance with Water Resources Division goals quality assurance. The district quality-assurance plan does not describe detailed technical activities that are commonly termed "quality-control procedures." Instead, it focuses on current policies, operations, and responsibilities that are implemented at the management level. Contents of the plan will be reviewed annually and updated as programs and operations change.

Strategic Factors on Interpreting Remanufacturing Quality-Certifying Framework to Address Warranty Aftermarket for Malaysian Industry

NASA Astrophysics Data System (ADS)

Mohamed, N.; Saman, M. Z. M.; Sharif, S.; Hamzah, H. S.

2018-03-01

While the concept of remanufacturing is gaining popularity globally, literature and theory on strategic decision-making on certifying for warranty in this area remain limited. A strategic and establish concept flow is developed based on extensive literature review and surveys with experienced experts who are dealing with remanufactured, reconditioned, rebuilt and reused components. The remanufacturing research on evaluating quality assurance of remanufactured component targets macro-level parameters and the indicators which must be confirmed for evaluation. The strategic remanufacturing factors identified from the literature review are discussed in a brainstorming session with a number of remanufacturing researchers and academic experts. The study is further broadened by industrial surveys and case studies to justify the inputs on developing a framework to certify remanufactured components. Preliminary results have established the key factors of remanufacturing quality control that might lead to the strict quality assurance of remanufactured components. Later, the developed framework can be used as a benchmarking tool to certify remanufactured components and warranty issuance. The findings serve as the foundation for further research concerning Original Equipment Manufacturer (OEM) or Original Equipment Remanufacturer (OER) and Independent Equipment Remanufacturer (IER) in the Malaysian Remanufacturing Industry.

Quality in Web-Supported Learning.

ERIC Educational Resources Information Center

Fresen, Jill

2002-01-01

Discusses quality assurance for Web-based courses, based on experiences at the University of Pretoria. Topics include evaluation of courseware; the concept of quality, including quality control, quality assurance, and total quality management; implementing a quality management system; measurement techniques; and partnerships. (LRW)

The quality assurance-risk management interface.

PubMed

Little, N

1992-08-01

Involvement with both risk management and quality assurance programs has led many authors to the conclusion that the fundamental differences between these activities are, in fact, very small. "At the point of overlap, it is almost impossible to distinguish the purposes and methods of both functions from one another." "Good risk management includes real improvement in patient care through organized quality assurance activities." The interface between a proactive risk management program and a quality assurance program is dynamic and can serve the legitimate interests of both. There is little to be gained by thinking of them as separate entities and much to be gained by sharing the lessons of both. If one thinks of risk management in terms of "risk" to quality patient care, and that "assuring quality" is the most productive type of risk management, then there is no practical reason to separate one from the other.

The Royal College of Pathologists of Australasia Quality Assurance Program: Immunohistochemistry Breast Marker Audit Overview 2005-2015.

PubMed

Haffajee, Zenobia Ayesha Mohamed; Kumar, Beena; Francis, Glenn; Peck, Martyn; Badrick, Tony

2017-11-20

The Royal College of Pathologists of Australasia Quality Assurance Program (RCPAQAP) Anatomical Pathology provides a comprehensive External Quality Assurance (EQA) exercise to review the reporting of immunohistochemistry (IHC) and in-situ hybridization (ISH) breast markers through an audit of clinical results. The aim of this exercise was to provide information regarding the quality of breast marker testing within clinical laboratories from 2005 to 2015. This comprehensive audit included estrogen, progesterone, and HER2 marker reporting. This was an important quality assurance activity established in response to ongoing difficulties experienced in laboratories in this area of testing.

Evaluation of a Standardized Method of Quality Assurance in Mental Health Records: A Pilot Study

ERIC Educational Resources Information Center

Bradshaw, Kelsey M.; Donohue, Bradley; Fayeghi, Jasmine; Lee, Tiffany; Wilks, Chelsey R.; Ross, Brendon

2016-01-01

The widespread adoption of research-supported treatments by mental health providers has facilitated empirical development of quality assurance (QA) methods. Research in this area has focused on QA systems aimed at assuring the integrity of research-supported treatment implementation, while examination of QA systems to assure appropriate…

Managing the Quality of Environmental Data in EPA Region 9

EPA Pesticide Factsheets

EPA Pacific Southwest, Region 9's Quality Assurance (QA) section's primary mission is to effectively oversee and carry out the Quality System and Quality Management Plan, and project-level quality assurance and quality control (QA/QC) activities.

Medical Physics Challenges for the Implementation of Quality Assurance Programmes in Radiation Oncology.

PubMed

Meghzifene, A

2017-02-01

The importance of quality assurance in radiation therapy, as well as its positive consequences on patient treatment outcome, is well known to radiation therapy professionals. In low- and middle-income countries, the implementation of quality assurance in radiation therapy is especially challenging, due to a lack of staff training, a lack of national guidelines, a lack of quality assurance equipment and high patient daily throughput. According to the International Atomic Energy Agency (IAEA) Directory of Radiotherapy Centres, the proportion of linear accelerators compared with Co-60 machines has increased significantly in recent years in low- and middle-income countries. However, this increase in the proportion of relatively more demanding technology is not always accompanied with the necessary investment in staff training and quality assurance. The IAEA provides supports to low- and middle-income countries to develop and strengthen quality assurance programmes at institutional and national level. It also provides guidance, through its publications, on quality assurance and supports implementation of comprehensive clinical audits to identify gaps and makes recommendations for quality improvement in radiation therapy. The new AAPM TG100 report suggests a new approach to quality management in radiation therapy. If implemented, it will lead to improved cost-effectiveness of radiation therapy in all income settings. Low- and middle-income countries could greatly benefit from this new approach as it will help direct their scarce resources to areas where they can produce the optimum impact on patient care, without compromising patient safety. Copyright © 2016. Published by Elsevier Ltd.

An open source automatic quality assurance (OSAQA) tool for the ACR MRI phantom.

PubMed

Sun, Jidi; Barnes, Michael; Dowling, Jason; Menk, Fred; Stanwell, Peter; Greer, Peter B

2015-03-01

Routine quality assurance (QA) is necessary and essential to ensure MR scanner performance. This includes geometric distortion, slice positioning and thickness accuracy, high contrast spatial resolution, intensity uniformity, ghosting artefact and low contrast object detectability. However, this manual process can be very time consuming. This paper describes the development and validation of an open source tool to automate the MR QA process, which aims to increase physicist efficiency, and improve the consistency of QA results by reducing human error. The OSAQA software was developed in Matlab and the source code is available for download from http://jidisun.wix.com/osaqa-project/. During program execution QA results are logged for immediate review and are also exported to a spreadsheet for long-term machine performance reporting. For the automatic contrast QA test, a user specific contrast evaluation was designed to improve accuracy for individuals on different display monitors. American College of Radiology QA images were acquired over a period of 2 months to compare manual QA and the results from the proposed OSAQA software. OSAQA was found to significantly reduce the QA time from approximately 45 to 2 min. Both the manual and OSAQA results were found to agree with regard to the recommended criteria and the differences were insignificant compared to the criteria. The intensity homogeneity filter is necessary to obtain an image with acceptable quality and at the same time keeps the high contrast spatial resolution within the recommended criterion. The OSAQA tool has been validated on scanners with different field strengths and manufacturers. A number of suggestions have been made to improve both the phantom design and QA protocol in the future.

A methodology for model-based development and automated verification of software for aerospace systems

NASA Astrophysics Data System (ADS)

Martin, L.; Schatalov, M.; Hagner, M.; Goltz, U.; Maibaum, O.

Today's software for aerospace systems typically is very complex. This is due to the increasing number of features as well as the high demand for safety, reliability, and quality. This complexity also leads to significant higher software development costs. To handle the software complexity, a structured development process is necessary. Additionally, compliance with relevant standards for quality assurance is a mandatory concern. To assure high software quality, techniques for verification are necessary. Besides traditional techniques like testing, automated verification techniques like model checking become more popular. The latter examine the whole state space and, consequently, result in a full test coverage. Nevertheless, despite the obvious advantages, this technique is rarely yet used for the development of aerospace systems. In this paper, we propose a tool-supported methodology for the development and formal verification of safety-critical software in the aerospace domain. The methodology relies on the V-Model and defines a comprehensive work flow for model-based software development as well as automated verification in compliance to the European standard series ECSS-E-ST-40C. Furthermore, our methodology supports the generation and deployment of code. For tool support we use the tool SCADE Suite (Esterel Technology), an integrated design environment that covers all the requirements for our methodology. The SCADE Suite is well established in avionics and defense, rail transportation, energy and heavy equipment industries. For evaluation purposes, we apply our approach to an up-to-date case study of the TET-1 satellite bus. In particular, the attitude and orbit control software is considered. The behavioral models for the subsystem are developed, formally verified, and optimized.