Sample records for quality control boards

  1. 40 CFR 62.7856 - Albuquerque/Bernalillo County Air Quality Control Board.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Albuquerque/Bernalillo County Air Quality Control Board. (a) Identification of Plan. Albuquerque-Bernalillo... County Air Quality Control Board on November 9, 2005. (b) Identification of Sources. The plan applies to... County Air Quality Control Board that commenced construction prior to May 30, 1991, and have not been...

  2. 115. QUALITY CONTROL BOARD FOR MAINTENANCE AND INSPECTION AT SOUTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    115. QUALITY CONTROL BOARD FOR MAINTENANCE AND INSPECTION AT SOUTH SIDE OF MECHANICAL AND ELECTRICAL ROOM (110), LSB (BLDG. 770), FACING WEST ON EXTERIOR WALL OF QUALITY ASSURANCE ROOM (106A) - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 West, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  3. 40 CFR 62.7856 - Albuquerque/Bernalillo County Air Quality Control Board.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 9 2012-07-01 2012-07-01 false Albuquerque/Bernalillo County Air... Albuquerque/Bernalillo County Air Quality Control Board. (a) Identification of Plan. Albuquerque-Bernalillo County Municipal Solid Waste Landfill Designated Pollutant Plan, as adopted by the Albuquerque/Bernalillo...

  4. 40 CFR 62.7856 - Albuquerque/Bernalillo County Air Quality Control Board.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 9 2014-07-01 2014-07-01 false Albuquerque/Bernalillo County Air... Albuquerque/Bernalillo County Air Quality Control Board. (a) Identification of Plan. Albuquerque-Bernalillo County Municipal Solid Waste Landfill Designated Pollutant Plan, as adopted by the Albuquerque/Bernalillo...

  5. 40 CFR 62.7856 - Albuquerque/Bernalillo County Air Quality Control Board.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 9 2013-07-01 2013-07-01 false Albuquerque/Bernalillo County Air... Albuquerque/Bernalillo County Air Quality Control Board. (a) Identification of Plan. Albuquerque-Bernalillo County Municipal Solid Waste Landfill Designated Pollutant Plan, as adopted by the Albuquerque/Bernalillo...

  6. Quality control process improvement of flexible printed circuit board by FMEA

    NASA Astrophysics Data System (ADS)

    Krasaephol, Siwaporn; Chutima, Parames

    2018-02-01

    This research focuses on the quality control process improvement of Flexible Printed Circuit Board (FPCB), centred around model 7-Flex, by using Failure Mode and Effect Analysis (FMEA) method to decrease proportion of defective finished goods that are found at the final inspection process. Due to a number of defective units that were found at the final inspection process, high scraps may be escaped to customers. The problem comes from poor quality control process which is not efficient enough to filter defective products from in-process because there is no In-Process Quality Control (IPQC) or sampling inspection in the process. Therefore, the quality control process has to be improved by setting inspection gates and IPCQs at critical processes in order to filter the defective products. The critical processes are analysed by the FMEA method. IPQC is used for detecting defective products and reducing chances of defective finished goods escaped to the customers. Reducing proportion of defective finished goods also decreases scrap cost because finished goods incur higher scrap cost than work in-process. Moreover, defective products that are found during process can reflect the abnormal processes; therefore, engineers and operators should timely solve the problems. Improved quality control was implemented for 7-Flex production lines from July 2017 to September 2017. The result shows decreasing of the average proportion of defective finished goods and the average of Customer Manufacturers Lot Reject Rate (%LRR of CMs) equal to 4.5% and 4.1% respectively. Furthermore, cost saving of this quality control process equals to 100K Baht.

  7. Recommendations for assessing water quality and safety on board merchant ships.

    PubMed

    Grappasonni, Iolanda; Cocchioni, Mario; Degli Angioli, Rolando; Saturnino, Andrea; Sibilio, Fabio; Scuri, Stefania; Amenta, Francesco

    2013-01-01

    Health and diseases on board ships may depend on water. Interventions to improve the quality of water may bring to significant benefits to health and water stores/supply and should be controlledto protect health. This paper has reviewed the main regulations for the control of water safety and qualityon board ships and presents some practical recommendations for keeping water healthy and safe in passenger and cargo merchant ships. The main international regulations and guidelines on the topic were analysed. Guidelines forWater Quality on Board Merchant Ships Including Passenger Vessels of Health Protection Agency, World Health Organisation (WHO) Guide to Ship Sanitation, WHO Guidelines for Drinking Water Quality, WHO Water Safety Plan and the United States Center for Disease Control and Prevention Vessel Sanitation Program were examined. Recommendations for passenger and, if available, for cargo ships were collected and compared. Recommended questionnaire: A questionnaire summarising the main information to collect for assessingthe enough quality of water for the purposes it should be used on board is proposed. The need of havinga crew member with water assessment duties on board, trained for performing these activities properlyis discussed. Water quality on board ships should be monitored routinely. Monitoring should be directedto chemical and microbiological parameters for identifying possible contamination sources, using specifickits by a designed crew member. More detailed periodic assessments should be under the responsibility ofspecialised personnel/laboratories and should be based on sample collection from all tanks and sites of waterdistribution. It is important to select a properly trained crew member on board for monitoring water quality.

  8. 7 CFR 930.44 - Quality control.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Quality control. 930.44 Section 930.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Control § 930.44 Quality control. (a) Quality standards. The Board may establish, with the approval of the...

  9. 7 CFR 930.44 - Quality control.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Quality control. 930.44 Section 930.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Control § 930.44 Quality control. (a) Quality standards. The Board may establish, with the approval of the...

  10. 7 CFR 930.44 - Quality control.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Quality control. 930.44 Section 930.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Control § 930.44 Quality control. (a) Quality standards. The Board may establish, with the approval of the...

  11. 7 CFR 930.44 - Quality control.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Quality control. 930.44 Section 930.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... Control § 930.44 Quality control. (a) Quality standards. The Board may establish, with the approval of the...

  12. Enhancing board oversight on quality of hospital care: an agency theory perspective.

    PubMed

    Jiang, H Joanna; Lockee, Carlin; Fraser, Irene

    2012-01-01

    Community hospitals in the United States are almost all governed by a governing board that is legally accountable for the quality of care provided. Increasing pressures for better quality and safety are prompting boards to strengthen their oversight function on quality. In this study, we aimed to provide an update to prior research by exploring the role and practices of governing boards in quality oversight through the lens of agency theory and comparing hospital quality performance in relation to the adoption of those practices. Data on board practices from a survey conducted by The Governance Institute in 2007 were merged with data on hospital quality drawn from two federal sources that measured processes of care and mortality. The study sample includes 445 public and private not-for-profit hospitals. We used factor analysis to explore the underlying dimensions of board practices. We further compared hospital quality performance by the adoption of each individual board practice. Consistent with the agency theory, the 13 board practices included in the survey appear to center around enhancing accountability of the board, management, and the medical staff. Reviewing the hospital's quality performance on a regular basis was the most common practice. A number of board practices, not examined in prior research, showed significant association with better performance on process of care and/or risk-adjusted mortality: requiring major new clinical programs to meet quality-related criteria, setting some quality goals at the "theoretical ideal" level, requiring both the board and the medical staff to be as involved as management in setting the agenda for discussion on quality, and requiring the hospital to report its quality/safety performance to the general public. Hospital governing boards should examine their current practices and consider adopting those that would enhance the accountability of the board itself, management, and the medical staff.

  13. Considering chance in quality and safety performance measures: an analysis of performance reports by boards in English NHS trusts.

    PubMed

    Schmidtke, Kelly Ann; Poots, Alan J; Carpio, Juan; Vlaev, Ivo; Kandala, Ngianga-Bakwin; Lilford, Richard J

    2017-01-01

    Hospital board members are asked to consider large amounts of quality and safety data with a duty to act on signals of poor performance. However, in order to do so it is necessary to distinguish signals from noise (chance). This article investigates whether data in English National Health Service (NHS) acute care hospital board papers are presented in a way that helps board members consider the role of chance in their decisions. Thirty English NHS trusts were selected at random and their board papers retrieved. Charts depicting quality and safety were identified. Categorical discriminations were then performed to document the methods used to present quality and safety data in board papers, with particular attention given to whether and how the charts depicted the role of chance, that is, by including control lines or error bars. Thirty board papers, containing a total of 1488 charts, were sampled. Only 88 (6%) of these charts depicted the role of chance, and only 17 of the 30 board papers included any charts depicting the role of chance. Of the 88 charts that attempted to represent the role of chance, 16 included error bars and 72 included control lines. Only 6 (8%) of the 72 control charts indicated where the control lines had been set (eg, 2 vs 3 SDs). Hospital board members are expected to consider large amounts of information. Control charts can help board members distinguish signals from noise, but often boards are not using them. We discuss demand-side and supply-side barriers that could be overcome to increase use of control charts in healthcare. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  14. Are School Boards Aware of the Educational Quality of Their Schools?

    ERIC Educational Resources Information Center

    Hooge, Edith; Honingh, Marlies

    2014-01-01

    School boards are expected to monitor and enhance the educational quality of their schools. To know whether and how school boards are able to do so, we first of all need to know whether school boards are aware of the educational quality of their schools in the first place. Taking Dutch school boards in primary education as an exemplary case (N =…

  15. Information Management System for the California State Water Resources Control Board (SWRCB)

    NASA Technical Reports Server (NTRS)

    Heald, T. C.; Redmann, G. H.

    1973-01-01

    A study was made to establish the requirements for an integrated state-wide information management system for water quality control and water quality rights for the State of California. The data sources and end requirements were analyzed for the data collected and used by the numerous agencies, both State and Federal, as well as the nine Regional Boards under the jurisdiction of the State Board. The report details the data interfaces and outlines the system design. A program plan and statement of work for implementation of the project is included.

  16. Quality Control in Higher Education.

    ERIC Educational Resources Information Center

    Hogarth, Charles P.

    The status of quality control in U.S. higher education is discussed with an overview of the functions and structure of public and private colleges and universities. The book is divided into seven chapters: (1) outside controls (accrediting groups, governmental groups and other groups); (2) structure (board of control, president, organization); (3)…

  17. Cabin Air Quality On Board Mir and the International Space Station: A Comparison

    NASA Technical Reports Server (NTRS)

    Macatangay, Ariel; Perry, Jay L.

    2007-01-01

    The maintenance of the cabin atmosphere aboard spacecraft is critical not only to its habitability but also to its function. Ideally, air quality can be maintained by striking a proper balance between the generation and removal of contaminants. Both very dynamic processes, the balance between generation and removal can be difficult to maintain and control because the state of the cabin atmosphere is in constant evolution responding to different perturbations. Typically, maintaining a clean cabin environment on board crewed spacecraft and space habitats is the central function of the environmental control and life support (ECLS) system. While active air quality control equipment is deployed on board every vehicle to remove carbon dioxide, water vapor, and trace chemical components from the cabin atmosphere, perturbations associated with logistics, vehicle construction and maintenance, and ECLS system configuration influence the resulting cabin atmospheric quality. The air-quality data obtained from the International Space Station (ISS) and NASA-Mir programs provides a wealth of information regarding the maintenance of the cabin atmosphere aboard long-lived space habitats. A comparison of the composition of the trace chemical contaminant load is presented. Correlations between ground-based and in-flight operations that influence cabin atmospheric quality are identified and discussed, and observations on cabin atmospheric quality during the NASA-Mir expeditions and the International Space Station are explored.

  18. 77 FR 69795 - Malcolm Baldrige National Quality Award Board of Overseers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-21

    ... Quality Award Board of Overseers AGENCY: National Institute of Standards and Technology, Department of... Quality Award (Board of Overseers) will meet in open session on Wednesday, December 12, 2012. The purpose... Standards and Technology and from the Chair of the Judges' Panel of the Malcolm Baldrige National Quality...

  19. AGB Statement on Board Responsibility for the Oversight of Educational Quality

    ERIC Educational Resources Information Center

    Association of Governing Boards of Universities and Colleges, 2011

    2011-01-01

    This "Statement on Board Responsibility for the Oversight of Educational Quality," approved by the Board of Directors of the Association of Governing Boards (AGB) in March 2011, urges institutional administrators and governing boards to engage fully in this area of board responsibility. The seven principles in this statement offer suggestions to…

  20. Board oversight of patient care quality in community health systems.

    PubMed

    Prybil, Lawrence D; Peterson, Richard; Brezinski, Paul; Zamba, Gideon; Roach, William; Fillmore, Ammon

    2010-01-01

    In hospitals and health systems, ensuring that standards for the quality of patient care are established and continuous improvement processes are in place are among the board's most fundamental responsibilities. A recent survey has examined governance oversight of patient care quality at 123 nonprofit community health systems and compared their practices with current benchmarks of good governance. The findings show that 88% of the boards have established standing committees on patient quality and safety, nearly all chief executive officers' performance expectations now include targets related to patient quality and safety, and 96% of the boards regularly receive formal written reports regarding their organizations' performance in relation to quality measures and standards. However, there continue to be gaps between present reality and current benchmarks of good governance in several areas. These gaps are somewhat greater for independent systems than for those affiliated with a larger parent organization.

  1. Next level of board accountability in health care quality.

    PubMed

    Pronovost, Peter J; Armstrong, C Michael; Demski, Renee; Peterson, Ronald R; Rothman, Paul B

    2018-03-19

    Purpose The purpose of this paper is to offer six principles that health system leaders can apply to establish a governance and management system for the quality of care and patient safety. Design/methodology/approach Leaders of a large academic health system set a goal of high reliability and formed a quality board committee in 2011 to oversee quality and patient safety everywhere care was delivered. Leaders of the health system and every entity, including inpatient hospitals, home care companies, and ambulatory services staff the committee. The committee works with the management for each entity to set and achieve quality goals. Through this work, the six principles emerged to address management structures and processes. Findings The principles are: ensure there is oversight for quality everywhere care is delivered under the health system; create a framework to organize and report the work; identify care areas where quality is ambiguous or underdeveloped (i.e. islands of quality) and work to ensure there is reporting and accountability for quality measures; create a consolidated quality statement similar to a financial statement; ensure the integrity of the data used to measure and report quality and safety performance; and transparently report performance and create an explicit accountability model. Originality/value This governance and management system for quality and safety functions similar to a finance system, with quality performance documented and reported, data integrity monitored, and accountability for performance from board to bedside. To the authors' knowledge, this is the first description of how a board has taken this type of systematic approach to oversee the quality of care.

  2. Controlling front-end electronics boards using commercial solutions

    NASA Astrophysics Data System (ADS)

    Beneyton, R.; Gaspar, C.; Jost, B.; Schmeling, S.

    2002-04-01

    LHCb is a dedicated B-physics experiment under construction at CERN's large hadron collider (LHC) accelerator. This paper will describe the novel approach LHCb is taking toward controlling and monitoring of electronics boards. Instead of using the bus in a crate to exercise control over the boards, we use credit-card sized personal computers (CCPCs) connected via Ethernet to cheap control PCs. The CCPCs will provide a simple parallel, I2C, and JTAG buses toward the electronics board. Each board will be equipped with a CCPC and, hence, will be completely independently controlled. The advantages of this scheme versus the traditional bus-based scheme will be described. Also, the integration of the controls of the electronics boards into a commercial supervisory control and data acquisition (SCADA) system will be shown.

  3. Responsibility for quality improvement and patient safety: hospital board and medical staff leadership challenges.

    PubMed

    Goeschel, Christine A; Wachter, Robert M; Pronovost, Peter J

    2010-07-01

    Concern about the quality and safety of health care persists, 10 years after the 1999 Institute of Medicine report To Err is Human. Despite growing awareness of quality and safety risks, and significant efforts to improve, progress is difficult to measure. Hospital leaders, including boards and medical staffs, are accountable to improve care, yet they often address this duty independently. Shared responsibility for quality and patient safety improvement presents unique challenges and unprecedented opportunities for boards and medical staffs. To capitalize on the pressure to improve, both groups may benefit from a better understanding of their synergistic potential. Boards should be educated about the quality of care provided in their institutions and about the challenges of valid measurement and accurate reporting. Boards strengthen their quality oversight capacity by recruiting physicians for vacant board seats. Medical staff members strengthen their role as hospital leaders when they understand the unique duties of the governing board. A quality improvement strategy rooted in synergistic efforts by the board and the medical staff may offer the greatest potential for safer care. Such a mutually advantageous approach requires a clear appreciation of roles and responsibilities and respect for differences. In this article, we review these responsibilities, describe opportunities for boards and medical staffs to collaborate as leaders, and offer recommendations for how boards and medical staff members can address the challenges of shared responsibility for quality of care.

  4. A temperature controller board for the ARC controller

    NASA Astrophysics Data System (ADS)

    Tulloch, Simon

    2016-07-01

    A high-performance temperature controller board has been produced for the ARC Generation-3 CCD controller. It contains two 9W temperature servo loops and four temperature input channels and is fully programmable via the ARC API and OWL data acquisition program. PI-loop control is implemented in an on-board micro. Both diode and RTD sensors can be used. Control and telemetry data is sent via the ARC backplane although a USB-2 interface is also available. Further functionality includes hardware timers and high current drivers for external shutters and calibration LEDs, an LCD display, a parallel i/o port, a pressure sensor interface and an uncommitted analogue telemetry input.

  5. Making the Grade: How Boards Can Ensure Academic Quality. Second Edition

    ERIC Educational Resources Information Center

    Ewell, Peter

    2012-01-01

    "Making the Grade: How Boards Can Ensure Academic Quality"--popularly referred to as "The Little Yellow Book" by boards, faculty, provosts, and assessment specialists--provides clear guidance for the board's role in the most important "business" of academe: educating students. As public calls for greater accountability skyrocket, this new edition…

  6. Tumor Boards and the Quality of Cancer Care

    PubMed Central

    Landrum, Mary Beth; Lamont, Elizabeth B.; Bozeman, Samuel R.; Shulman, Lawrence N.; McNeil, Barbara J.

    2013-01-01

    Background Despite the widespread use of tumor boards, few data on their effects on cancer care exist. We assessed whether the presence of a tumor board, either general or cancer specific, was associated with recommended cancer care, outcomes, or use in the Veterans Affairs (VA) health system. Methods We surveyed 138 VA medical centers about the presence of tumor boards and linked cancer registry and administrative data to assess receipt of stage-specific recommended care, survival, or use for patients with colorectal, lung, prostate, hematologic, and breast cancers diagnosed in the period from 2001 to 2004 and followed through 2005. We used multivariable logistic regression to assess associations of tumor boards with the measures, adjusting for patient sociodemographic and clinical characteristics. All statistical tests were two-sided. Results Most facilities (75%) had at least one tumor board, and many had several cancer-specific tumor boards. Presence of a tumor board was associated with only seven of 27 measures assessed (all P < .05), and several associations were not in expected directions. Rates of some recommended care (eg, white blood cell growth factors with cyclophosphamide, adriamycin, vincristine, and prednisone in diffuse large B-cell lymphoma) were lower in centers with hematologic-specialized tumor boards (39.4%) than in centers with general tumor boards (61.3%) or no tumor boards (56.4%; P = .002). Only one of 27 measures was statistically significantly associated with tumor boards after applying a Bonferroni correction for multiple comparisons. Conclusions We observed little association of multidisciplinary tumor boards with measures of use, quality, or survival. This may reflect no effect or an effect that varies by structural and functional components and participants’ expertise. PMID:23274388

  7. Tumor boards and the quality of cancer care.

    PubMed

    Keating, Nancy L; Landrum, Mary Beth; Lamont, Elizabeth B; Bozeman, Samuel R; Shulman, Lawrence N; McNeil, Barbara J

    2013-01-16

    Despite the widespread use of tumor boards, few data on their effects on cancer care exist. We assessed whether the presence of a tumor board, either general or cancer specific, was associated with recommended cancer care, outcomes, or use in the Veterans Affairs (VA) health system. We surveyed 138 VA medical centers about the presence of tumor boards and linked cancer registry and administrative data to assess receipt of stage-specific recommended care, survival, or use for patients with colorectal, lung, prostate, hematologic, and breast cancers diagnosed in the period from 2001 to 2004 and followed through 2005. We used multivariable logistic regression to assess associations of tumor boards with the measures, adjusting for patient sociodemographic and clinical characteristics. All statistical tests were two-sided. Most facilities (75%) had at least one tumor board, and many had several cancer-specific tumor boards. Presence of a tumor board was associated with only seven of 27 measures assessed (all P < .05), and several associations were not in expected directions. Rates of some recommended care (eg, white blood cell growth factors with cyclophosphamide, adriamycin, vincristine, and prednisone in diffuse large B-cell lymphoma) were lower in centers with hematologic-specialized tumor boards (39.4%) than in centers with general tumor boards (61.3%) or no tumor boards (56.4%; P = .002). Only one of 27 measures was statistically significantly associated with tumor boards after applying a Bonferroni correction for multiple comparisons. We observed little association of multidisciplinary tumor boards with measures of use, quality, or survival. This may reflect no effect or an effect that varies by structural and functional components and participants' expertise.

  8. 76 FR 71514 - Malcolm Baldrige National Quality Award Board of Overseers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-18

    ... Commerce. ACTION: Notice of Open Meeting. SUMMARY: The Board of Overseers of the Malcolm Baldrige National Quality Award (Board of Overseers) will meet in open session on December 13, 2011. The purpose of this... Advisory Committee Act, 5 U.S.C. App., the Board of Overseers will meet in open session on December 13...

  9. Governance of quality of care: a qualitative study of health service boards in Victoria, Australia.

    PubMed

    Bismark, Marie M; Studdert, David M

    2014-06-01

    To describe the engagement of health service boards with quality-of-care issues and to identify factors that influence boards' activities in this area. We conducted semistructured interviews with 35 board members and executives from 13 public health services in Victoria, Australia. Interviews focused on the role currently played by boards in overseeing quality of care. We also elicited interviewees' perceptions of factors that have influenced their current approach to governance in this area. Thematic analysis was used to identify key themes from interview transcripts. Virtually all interviewees believed boards had substantial opportunities to influence the quality of care delivered within the service, chiefly through setting priorities, monitoring progress, holding staff to account and shaping culture. Perceived barriers to leveraging this influence included insufficient resources, gaps in skills and experience among board members, inadequate information on performance and regulatory requirements that miss the mark. Interviewees converged on four enablers of more effective quality governance: stronger regional collaborations; more tailored board training on quality issues; smarter use of reporting and accreditation requirements; and better access to data that was reliable, longitudinal and allowed for benchmarking against peer organisations. Although health service boards are eager to establish quality of care as a governance priority, several obstacles are blocking progress. The result is a gap between the rhetoric of quality governance and the reality of month-to-month activities at the board level. The imperative for effective board-level engagement in this area cannot be met until these barriers are addressed. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  10. 78 FR 22785 - Approval and Promulgation of Air Quality Implementation Plans; Delaware, State Board Requirements

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-17

    ... Promulgation of Air Quality Implementation Plans; Delaware, State Board Requirements AGENCY: Environmental... revision to the Delaware State Implementation Plan (SIP) submitted by the Delaware Department of Natural Resources and Environmental Control (DNREC) on January 11, 2013. The SIP revision addresses requirements of...

  11. Governance of quality of care: a qualitative study of health service boards in Victoria, Australia

    PubMed Central

    Bismark, Marie M; Studdert, David M

    2014-01-01

    Objectives To describe the engagement of health service boards with quality-of-care issues and to identify factors that influence boards’ activities in this area. Methods We conducted semistructured interviews with 35 board members and executives from 13 public health services in Victoria, Australia. Interviews focused on the role currently played by boards in overseeing quality of care. We also elicited interviewees’ perceptions of factors that have influenced their current approach to governance in this area. Thematic analysis was used to identify key themes from interview transcripts. Results Virtually all interviewees believed boards had substantial opportunities to influence the quality of care delivered within the service, chiefly through setting priorities, monitoring progress, holding staff to account and shaping culture. Perceived barriers to leveraging this influence included insufficient resources, gaps in skills and experience among board members, inadequate information on performance and regulatory requirements that miss the mark. Interviewees converged on four enablers of more effective quality governance: stronger regional collaborations; more tailored board training on quality issues; smarter use of reporting and accreditation requirements; and better access to data that was reliable, longitudinal and allowed for benchmarking against peer organisations. Conclusions Although health service boards are eager to establish quality of care as a governance priority, several obstacles are blocking progress. The result is a gap between the rhetoric of quality governance and the reality of month-to-month activities at the board level. The imperative for effective board-level engagement in this area cannot be met until these barriers are addressed. PMID:24327735

  12. Bridging existing governance gaps: five evidence-based actions that boards can take to pursue high quality care.

    PubMed

    Leggat, Sandra G; Balding, Cathy

    2017-11-13

    Objective To explore the impact of the organisational quality systems on quality of care in Victorian health services. Methods During 2015 a total of 55 focus groups were conducted with more than 350 managers, clinical staff and board members in eight Victorian health services to explore the effectiveness of health service quality systems. A review of the quality and safety goals and strategies outlined in the strategic and operating plans of the participating health services was also undertaken. Results This paper focuses on the data related to the leadership role of health service boards in ensuring safe, high-quality care. The findings suggest that health service boards are not fully meeting their governance accountability to ensure consistently high-quality care. The data uncovered major clinical governance gaps between stated board and executive aspirations for quality and safety and the implementation of these expectations at point of care. These gaps were further compounded by quality system confusion, over-reliance on compliance, and inadequate staff engagement. Conclusion Based on the existing evidence we propose five specific actions boards can take to close the gaps, thereby supporting improved care for all consumers. What is known about this topic? Effective governance is essential for high-quality healthcare delivery. Boards are required to play an active role in their organisation's pursuit of high quality care. What does this paper add? Recent government reports suggest that Australian health service boards are not fully meeting their governance requirements for high quality, safe care delivery, and our research pinpoints key governance gaps. What are the implications for practitioners? Based on our research findings we outline five evidence-based actions for boards to improve their governance of quality care delivery. These actions focus on an organisational strategy for high-quality care, with the chief executive officer held accountable for

  13. How do hospital boards govern for quality improvement? A mixed methods study of 15 organisations in England

    PubMed Central

    Pomeroy, Linda; Burnett, Susan; Anderson, Janet E; Fulop, Naomi J

    2017-01-01

    Background Health systems worldwide are increasingly holding boards of healthcare organisations accountable for the quality of care that they provide. Previous empirical research has found associations between certain board practices and higher quality patient care; however, little is known about how boards govern for quality improvement (QI). Methods We conducted fieldwork over a 30-month period in 15 healthcare provider organisations in England as part of a wider evaluation of a board-level organisational development intervention. Our data comprised board member interviews (n=65), board meeting observations (60 hours) and documents (30 sets of board meeting papers, 15 board minutes and 15 Quality Accounts). We analysed the data using a framework developed from existing evidence of links between board practices and quality of care. We mapped the variation in how boards enacted governance of QI and constructed a measure of QI governance maturity. We then compared organisations to identify the characteristics of those with mature QI governance. Results We found that boards with higher levels of maturity in relation to governing for QI had the following characteristics: explicitly prioritising QI; balancing short-term (external) priorities with long-term (internal) investment in QI; using data for QI, not just quality assurance; engaging staff and patients in QI; and encouraging a culture of continuous improvement. These characteristics appeared to be particularly enabled and facilitated by board-level clinical leaders. Conclusions This study contributes to a deeper understanding of how boards govern for QI. The identified characteristics of organisations with mature QI governance seemed to be enabled by active clinical leadership. Future research should explore the biographies, identities and work practices of board-level clinical leaders and their role in organisation-wide QI. PMID:28689191

  14. Overseeing oversight: governance of quality and safety by hospital boards in the English NHS.

    PubMed

    Mannion, Russell; Davies, Huw; Freeman, Tim; Millar, Ross; Jacobs, Rowena; Kasteridis, Panos

    2015-01-01

    To contribute towards an understanding of hospital board composition and to explore board oversight of patient safety and health care quality in the English NHS. We reviewed the theory related to hospital board governance and undertook two national surveys about board management in NHS acute and specialist hospital trusts in England. The first survey was issued to 150 trusts in 2011/2012 and was completed online via a dedicated web tool. A total 145 replies were received (97% response rate). The second online survey was undertaken in 2012/2013 and targeted individual board members, using a previously validated standard instrument on board members' attitudes and competencies (the Board Self-Assessment Questionnaire). A total of 334 responses were received from 165 executive and 169 non-executive board members, providing at least one response from 95 of the 144 NHS trusts then in existence (66% response rate). Over 90% of the English NHS trust boards had 10-15 members. We found no significant difference in board size between trusts of different types (e.g. Foundation Trusts versus non-Foundation Trusts and Teaching Hospital Trusts versus non-Teaching Hospital Trusts). Clinical representation on boards was limited: around 62% had three or fewer members with clinical backgrounds. For about two-thirds of the trusts (63%), board members with a clinical background comprised less than 30% of the members. Boards were using a wide range and mix of quantitative performance metrics and soft intelligence (e.g. walk-arounds, patient stories) to monitor their organisations with regard to patient safety. The Board Self-Assessment Questionnaire data showed generally high or very high levels of agreement with desirable statements of practice in each of its six dimensions. Aggregate levels of agreement within each dimension ranged from 73% (for the dimension addressing interpersonal issues) to 85% (on the political). English NHS boards largely hold a wide range of attitudes and

  15. On-board congestion control for satellite packet switching networks

    NASA Technical Reports Server (NTRS)

    Chu, Pong P.

    1991-01-01

    It is desirable to incorporate packet switching capability on-board for future communication satellites. Because of the statistical nature of packet communication, incoming traffic fluctuates and may cause congestion. Thus, it is necessary to incorporate a congestion control mechanism as part of the on-board processing to smooth and regulate the bursty traffic. Although there are extensive studies on congestion control for both baseband and broadband terrestrial networks, these schemes are not feasible for space based switching networks because of the unique characteristics of satellite link. Here, we propose a new congestion control method for on-board satellite packet switching. This scheme takes into consideration the long propagation delay in satellite link and takes advantage of the the satellite's broadcasting capability. It divides the control between the ground terminals and satellite, but distributes the primary responsibility to ground terminals and only requires minimal hardware resource on-board satellite.

  16. 33 CFR 223.1 - Mississippi River Water Control Management Board.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Mississippi River Water Control Management Board. 223.1 Section 223.1 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE BOARDS, COMMISSIONS, AND COMMITTEES § 223.1 Mississippi River Water Control Management Board. (a) Purpose. This...

  17. 33 CFR 223.1 - Mississippi River Water Control Management Board.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Mississippi River Water Control Management Board. 223.1 Section 223.1 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE BOARDS, COMMISSIONS, AND COMMITTEES § 223.1 Mississippi River Water Control Management Board. (a) Purpose. This...

  18. Is having quality as an item on the executive board agenda associated with the implementation of quality management systems in European hospitals: a quantitative analysis.

    PubMed

    Botje, Daan; Klazinga, N S; Suñol, R; Groene, O; Pfaff, H; Mannion, R; Depaigne-Loth, A; Arah, O A; Dersarkissian, M; Wagner, C

    2014-04-01

    To assess whether there is a relationship between having quality as an item on the board's agenda, perceived external pressure (PEP) and the implementation of quality management in European hospitals. A quantitative, mixed method, cross-sectional study in seven European countries in 2011 surveying CEOs and quality managers and data from onsite audits. One hundred and fifty-five CEOs and 155 quality managers. One hundred and fifty-five randomly selected acute care hospitals in seven European countries (Czech Republic, France, Germany, Poland, Portugal, Spain and Turkey). Main outcome measure(s) Three constructs reflecting quality management based on questionnaire and audit data: (i) Quality Management System Index, (ii) Quality Management Compliance Index and (iii) Clinical Quality Implementation Index. The main predictor was whether quality performance was on the executive board's agenda. Discussing quality performance at executive board meetings more often was associated with a higher quality management system score (regression coefficient b = 2.53; SE = 1.16; P = 0.030). We found a trend in the associations of discussing quality performance with quality compliance and clinical quality implementation. PEP did not modify these relationships. Having quality as an item on the executive board's agenda allows them to review and discuss quality performance more often in order to improve their hospital's quality management. Generally, and as this study found, having quality on the executive board's agenda matters.

  19. Perceptions of Search Consultants of Qualities School Boards Seek in Superintendents.

    ERIC Educational Resources Information Center

    Lyons, James E.

    1993-01-01

    Summarizes a study to determine the qualities sought by school boards when employing superintendents, as perceived by superintendent search consultants. Highly desirable qualities included performance in previous positions, performance during the interview, evidence of leadership and managerial skills, communication skills, and experience and…

  20. 21. DETAIL INTERIOR VIEW OF ORIGINAL BENCH BOARD CONTROLS IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. DETAIL INTERIOR VIEW OF ORIGINAL BENCH BOARD CONTROLS IN CONTROL ROOM ON LEVEL +77 OF POWERHOUSE #1; THESE PANELS ARE ON LEFT SIDE OF BENCH BOARD CONTROLS. - Bonneville Project, Powerhouse No.1, Spanning Bradford Slough, from Bradford Island, Bonneville, Multnomah County, OR

  1. Is having quality as an item on the executive board agenda associated with the implementation of quality management systems in European hospitals: a quantitative analysis

    PubMed Central

    Botje, Daan; Klazinga, N.S.; Suñol, R.; Groene, O.; Pfaff, H.; Mannion, R.; Depaigne-Loth, A.; Arah, O.A.; Dersarkissian, M.; Wagner, C.; Klazinga, N.; Kringos, D.S.; Lombarts, M.J.M.H.; Plochg, T.; Lopez, M.A.; Vallejo, P.; Saillour-Glenisson, F.; Car, M.; Jones, S.; Klaus, E.; Bottaro, S.; Garel, P.; Saluvan, M.; Bruneau, C.; Depaigne-Loth, A.; Hammer, A.; Ommen, O.; Pfaff, H.; Botje, D.; Escoval, A.; Lívio, A.; Eiras, M.; Franca, M.; Leite, I.; Almeman, F.; Kus, H.; Ozturk, K.; Mannion, R.; Wang, A.; Thompson, A.

    2014-01-01

    Objective To assess whether there is a relationship between having quality as an item on the board's agenda, perceived external pressure (PEP) and the implementation of quality management in European hospitals. Design A quantitative, mixed method, cross-sectional study in seven European countries in 2011 surveying CEOs and quality managers and data from onsite audits. Participants One hundred and fifty-five CEOs and 155 quality managers. Setting One hundred and fifty-five randomly selected acute care hospitals in seven European countries (Czech Republic, France, Germany, Poland, Portugal, Spain and Turkey). Main outcome measure(s) Three constructs reflecting quality management based on questionnaire and audit data: (i) Quality Management System Index, (ii) Quality Management Compliance Index and (iii) Clinical Quality Implementation Index. The main predictor was whether quality performance was on the executive board's agenda. Results Discussing quality performance at executive board meetings more often was associated with a higher quality management system score (regression coefficient b = 2.53; SE = 1.16; P = 0.030). We found a trend in the associations of discussing quality performance with quality compliance and clinical quality implementation. PEP did not modify these relationships. Conclusions Having quality as an item on the executive board's agenda allows them to review and discuss quality performance more often in order to improve their hospital's quality management. Generally, and as this study found, having quality on the executive board's agenda matters. PMID:24550260

  2. 33 CFR 223.1 - Mississippi River Water Control Management Board.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Management Board. 223.1 Section 223.1 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE... Management Board. (a) Purpose. This regulation establishes and prescribes the objectives, composition, responsibilities and authority of the Mississippi River Water Control Management Board. (b) Applicability. This...

  3. Taking It on Board: Quality Audit Findings for Higher Education Governance

    ERIC Educational Resources Information Center

    Baird, Jeanette

    2007-01-01

    An examination of the reports of quality audits of Australian universities is used to identify quality assurance issues which emerge as more or less important for governing bodies and academic boards respectively. For governing bodies, many issues identified in audit reports reflect established good practice, such as a need to evaluate the…

  4. 33 CFR 223.1 - Mississippi River Water Control Management Board.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Management Board. 223.1 Section 223.1 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE BOARDS, COMMISSIONS, AND COMMITTEES § 223.1 Mississippi River Water Control Management Board. (a) Purpose. This regulation establishes and prescribes the objectives, composition...

  5. 33 CFR 223.1 - Mississippi River Water Control Management Board.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Management Board. 223.1 Section 223.1 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE BOARDS, COMMISSIONS, AND COMMITTEES § 223.1 Mississippi River Water Control Management Board. (a) Purpose. This regulation establishes and prescribes the objectives, composition...

  6. Overseeing Educational Quality: A How-to Guide for Boards of Universities and Colleges

    ERIC Educational Resources Information Center

    Association of Governing Boards of Universities and Colleges, 2014

    2014-01-01

    Too often, boards spend too little time discussing student learning, student outcomes, and student success. As stewards of the whole of the institution, the oversight of educational quality is a primary obligation of governing boards. AGB--with support from the Teagle Foundation, an advisory committee, and teams from eight diverse…

  7. The Symbolic Role of Academic Boards in University Academic Quality Assurance

    ERIC Educational Resources Information Center

    Rowlands, Julie

    2013-01-01

    While much research on quality assurance in higher education has centred on issues related to the impact on teaching and learning and academic staff, there is a significant gap in the area of quality assurance and academic governance. Within Australia the roles of university academic boards (also known as academic senates or faculty senates) have…

  8. The impact of the board's strategy-setting role on board-management relations and hospital performance.

    PubMed

    Büchner, Vera Antonia; Schreyögg, Jonas; Schultz, Carsten

    2014-01-01

    The appropriate governance of hospitals largely depends on effective cooperation between governing boards and hospital management. Governing boards play an important role in strategy-setting as part of their support for hospital management. However, in certain situations, this active strategic role may also generate discord within this relationship. The objective of this study is to investigate the impact of the roles, attributes, and processes of governing boards on hospital performance. We examine the impact of the governing board's strategy-setting role on board-management collaboration quality and on financial performance while also analyzing the interaction effects of board diversity and board activity level. The data are derived from a survey that was sent simultaneously to German hospitals and their associated governing board, combined with objective performance information from annual financial statements and quality reports. We use a structural equation modeling approach to test the model. The results indicate that different board characteristics have a significant impact on hospital performance (R = .37). The strategy-setting role and board-management collaboration quality have a positive effect on hospital performance, whereas the impact of strategy-setting on collaboration quality is negative. We find that the positive effect of strategy-setting on performance increases with decreasing board diversity. When board members have more homogeneous backgrounds and exhibit higher board activity levels, the negative effect of the strategy-setting on collaboration quality also increases. Active strategy-setting by a governing board may generally improve hospital performance. Diverse members of governing boards should be involved in strategy-setting for hospitals. However, high board-management collaboration quality may be compromised if managerial autonomy is too highly restricted. Consequently, hospitals should support board-management collaboration about

  9. Assessments of the quality of randomized controlled trials published in International Journal of Urology from 1994 to 2011.

    PubMed

    Cho, Hee Ju; Chung, Jae Hoon; Jo, Jung Ki; Kang, Dong Hyuk; Cho, Jeong Man; Yoo, Tag Keun; Lee, Seung Wook

    2013-12-01

    Randomized controlled trials are one of the most reliable resources for assessing the effectiveness and safety of medical treatments. Low quality randomized controlled trials carry a large bias that can ultimately impair the reliability of their conclusions. The present study aimed to evaluate the quality of randomized controlled trials published in International Journal of Urology by using multiple quality assessment tools. Randomized controlled trials articles published in International Journal of Urology were found using the PubMed MEDLINE database, and qualitative analysis was carried out with three distinct assessment tools: the Jadad scale, the van Tulder scale and the Cochrane Collaboration Risk of Bias Tool. The quality of randomized controlled trials was analyzed by publication year, type of subjects, intervention, presence of funding and whether an institutional review board reviewed the study. A total of 68 randomized controlled trial articles were published among a total of 1399 original articles in International Journal of Urology. Among these randomized controlled trials, 10 (2.70%) were from 1994 to 1999, 23 (4.10%) were from 2000 to 2005 and 35 (4.00%) were from 2006 to 2011 (P = 0.494). On the assessment with the Jadad and van Tulder scale, the numbers and percentage of high quality randomized controlled trials increased over time. The studies that had institutional review board reviews, funding resources or that were carried out in multiple institutions had an increased percentage of high quality articles. The numbers and percentage of high-quality randomized controlled trials published in International Journal of Urology have increased over time. Furthermore, randomized controlled trials with funding resources, institutional review board reviews or carried out in multiple institutions have been found to be of higher quality compared with others not presenting these features. © 2013 The Japanese Urological Association.

  10. Sampling and Control Circuit Board for an Inertial Measurement Unit

    NASA Technical Reports Server (NTRS)

    Chelmins, David T (Inventor); Sands, Obed (Inventor); Powis, Richard T., Jr. (Inventor)

    2016-01-01

    A circuit board that serves as a control and sampling interface to an inertial measurement unit ("IMU") is provided. The circuit board is also configured to interface with a local oscillator and an external trigger pulse. The circuit board is further configured to receive the external trigger pulse from an external source that time aligns the local oscillator and initiates sampling of the inertial measurement device for data at precise time intervals based on pulses from the local oscillator. The sampled data may be synchronized by the circuit board with other sensors of a navigation system via the trigger pulse.

  11. 12 CFR 652.60 - Corporation board guidelines.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... (a) Your board of directors is responsible for ensuring that you maintain total capital at a level... developing the capital adequacy plan: (1) Capability of management; (2) Strategies and objectives in your business plan; (3) Quality of operating policies, procedures, and internal controls; (4) Quality and...

  12. 12 CFR 652.60 - Corporation board guidelines.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... (a) Your board of directors is responsible for ensuring that you maintain total capital at a level... developing the capital adequacy plan: (1) Capability of management; (2) Strategies and objectives in your business plan; (3) Quality of operating policies, procedures, and internal controls; (4) Quality and...

  13. Board of Pesticides Control: Maine ACF

    Science.gov Websites

    | Search Maine.gov Department of Agriculture, Conservation and Forestry Contact Us | Get Email/SMS Updates ; Programs → Bureau of Agriculture → Division of Animal and Plant Health → Board of Pesticides Control Plates Outdoor Heritage Fund Lottery Ticket Donations & More Contact Department of Agriculture

  14. Role and Responsibility of Board of Governors [BOG] in Ensuring Educational Quality in Colleges & Universities

    ERIC Educational Resources Information Center

    Naik, B. M.

    2012-01-01

    The paper presents in brief the need and importance of effective, imaginative and responsible governing boards in colleges and universities, so as to ensure educational quality. BOG should engage fruitfully with the principal and activities in college/ university. UGC, AICTE have now prescribed creation of effective boards for both government and…

  15. FPGA and USB based control board for quantum random number generator

    NASA Astrophysics Data System (ADS)

    Wang, Jian; Wan, Xu; Zhang, Hong-Fei; Gao, Yuan; Chen, Teng-Yun; Liang, Hao

    2009-09-01

    The design and implementation of FPGA-and-USB-based control board for quantum experiments are discussed. The usage of quantum true random number generator, control- logic in FPGA and communication with computer through USB protocol are proposed in this paper. Programmable controlled signal input and output ports are implemented. The error-detections of data frame header and frame length are designed. This board has been used in our decoy-state based quantum key distribution (QKD) system successfully.

  16. An institutional review board-based clinical research quality assurance program.

    PubMed

    Lad, Pramod M; Dahl, Rebecca

    2013-01-01

    Despite the acknowledged importance of quality assurance in the clinical research process, the problem of how such a program should be implemented at the level of an academic teaching hospital or a similar institution has not been addressed in the literature. Despite the fact that quality assurance is expected in programs which certify and accredit Institutional Review Boards (IRBs), very little is known about the role of the IRB in programs of clinical research quality assurance. In this article we consider the definition of clinical research quality assurance, and describe a program designed to achieve it. The key elements of such a program are education at the site level, which has both mandatory and voluntary components, and an auditing and monitoring program, which reinforces the education on quality assurance. The role of the IRB in achieving the program goals and the organizational placement of the quality assurance program within the IRB structure and function are important items of discussion.

  17. Hospital Board Oversight of Quality and Patient Safety: A Narrative Review and Synthesis of Recent Empirical Research

    PubMed Central

    Millar, Ross; Mannion, Russell; Freeman, Tim; Davies, Huw TO

    2013-01-01

    Context Recurring problems with patient safety have led to a growing interest in helping hospitals’ governing bodies provide more effective oversight of the quality and safety of their services. National directives and initiatives emphasize the importance of action by boards, but the empirical basis for informing effective hospital board oversight has yet to receive full and careful review. Methods This article presents a narrative review of empirical research to inform the debate about hospital boards’ oversight of quality and patient safety. A systematic and comprehensive search identified 122 papers for detailed review. Much of the empirical work appeared in the last ten years, is from the United States, and employs cross-sectional survey methods. Findings Recent empirical studies linking board composition and processes with patient outcomes have found clear differences between high- and low-performing hospitals, highlighting the importance of strong and committed leadership that prioritizes quality and safety and sets clear and measurable goals for improvement. Effective oversight is also associated with well-informed and skilled board members. External factors (such as regulatory regimes and the publication of performance data) might also have a role in influencing boards, but detailed empirical work on these is scant. Conclusions Health policy debates recognize the important role of hospital boards in overseeing patient quality and safety, and a growing body of empirical research has sought to elucidate that role. This review finds a number of areas of guidance that have some empirical support, but it also exposes the relatively inchoate nature of the field. Greater theoretical and methodological development is required if we are to secure more evidence-informed governance systems and practices that can contribute to safer care. PMID:24320168

  18. Report of the international workshop on quality control of monthly climate data

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1993-12-31

    The National Climatic Data Center (NCDC), the US Department of Energy`s Carbon Dioxide Information Analysis Center, and the World Meteorological Organization (WMO) cosponsored an international quality control workshop for monthly climate data, October 5--6, 1993, at NCDC. About 40 scientists from around the world participated. The purpose of the meeting was to discuss and compare various quality control methods and to draft recommendations concerning the most successful systems. The near-term goal to improve quality control of CLIMAT messages for the NCDC/WMO publication Monthly Climatic Data for the World was sucessfully met. An electronic bulletin board was established to post errorsmore » and corrections. Improved communications among Global Telecommunication System hubs will be implemented. Advanced quality control algorithms were discussed and improvements were suggested. Further data exchanges were arranged.« less

  19. Effective Superintendent-School Board Practices: Strategies for Developing and Maintaining Good Relationships with Your Board

    ERIC Educational Resources Information Center

    Townsend, Rene S.; Johnston, Gloria L.; Gross, Gwen E.; Lynch, Peggy; Garcy, Lorraine M.; Roberts, Benita B.; Novotney, Patricia B.

    2006-01-01

    Foster a strong superintendent-school board relationship centered on quality teaching and learning! This book helps current and future superintendents and school board members develop an effective governance team that prioritizes quality teaching and learning. Designed for practicing and aspiring superintendents and school board members, this…

  20. Overseeing One-Stops: A WIB Member's Guide to Quality Assurance. Workforce Board Development Series.

    ERIC Educational Resources Information Center

    2000

    This guide is intended to give workforce investment boards (WIBs) a practical framework for overseeing the performance of one-stop career centers. The introduction presents background information on a proposed quality assurance framework and the guide's format and development. The first two sections explain the importance of quality assurance to…

  1. ISO 9002 as Literacy Practice: Coping with Quality-Control Documents in a High-Tech Company

    ERIC Educational Resources Information Center

    Kleifgen, Jo Anne

    2005-01-01

    This study describes the process by which a circuit board manufacturing company became certified in an international quality control program known as ISO 9002. Particular attention is paid to how quality documents were made and used in actual practice and to the relationship between these standardized procedures (official literacies) and…

  2. Octafluoropropane Concentration Dynamics on Board the International Space Station

    NASA Technical Reports Server (NTRS)

    Perry, J. L.

    2003-01-01

    Since activating the International Space Station s (IS9 Service Module in November 2000, archival air quality samples have shown highly variable concentrations of octafluoropropane in the cabin. This variability has been directly linked to leakage from air conditioning systems on board the Service Module, Zvezda. While octafluoro- propane is not highly toxic, it presents a significant chal- lenge to the trace contaminant control systems. A discussion of octafluoropropane concentration dynamics is presented and the ability of on board trace contami- nant control systems to effectively remove octafluoropro- pane from the cabin atmosphere is assessed. Consideration is given to operational and logistics issues that may arise from octafluoropropane and other halo- carbon challenges to the contamination control systems as well as the potential for effecting cabin air quality.

  3. National Transportation Safety Board : weak internal control impaired financial accountability

    DOT National Transportation Integrated Search

    2001-09-28

    The U. S. General Accounting Office (GAO) was asked to review the National Transportation Safety Board's (NTSB) internal controls over selected types of fiscal year expenditures. They were asked to determine whether internal control weaknesses were a...

  4. The Role of Boards in College Access Programs: Creating and Maintaining Quality

    ERIC Educational Resources Information Center

    Center for Higher Education Policy Analysis, University of Southern California, 2006

    2006-01-01

    Access programs are facing increased scrutiny. Not all programs are equally effective. In an environment in which resources are short, funders increasingly require criteria that enable them to make informed decisions about program quality. As elaborated in this report , one role of a high performance board is to help develop benchmarks of…

  5. 75 FR 81268 - Science Advisory Board Staff Office; Notification of Two Public Quality Review Teleconferences of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-27

    ... Two Public Quality Review Teleconferences of the Chartered Science Advisory Board AGENCY... Office announces two public teleconferences of the chartered SAB to conduct quality reviews of three SAB... Appalachian Coalfields'' and ``Review of Field-Based Aquatic Life Benchmark for Conductivity in Central...

  6. Second Harmonic Imaging improves Echocardiograph Quality on board the International Space Station

    NASA Technical Reports Server (NTRS)

    Garcia, Kathleen; Sargsyan, Ashot; Hamilton, Douglas; Martin, David; Ebert, Douglas; Melton, Shannon; Dulchavsky, Scott

    2008-01-01

    Ultrasound (US) capabilities have been part of the Human Research Facility (HRF) on board the International Space Station (ISS) since 2001. The US equipment on board the ISS includes a first-generation Tissue Harmonic Imaging (THI) option. Harmonic imaging (HI) is the second harmonic response of the tissue to the ultrasound beam and produces robust tissue detail and signal. Since this is a first-generation THI, there are inherent limitations in tissue penetration. As a breakthrough technology, HI extensively advanced the field of ultrasound. In cardiac applications, it drastically improves endocardial border detection and has become a common imaging modality. U.S. images were captured and stored as JPEG stills from the ISS video downlink. US images with and without harmonic imaging option were randomized and provided to volunteers without medical education or US skills for identification of endocardial border. The results were processed and analyzed using applicable statistical calculations. The measurements in US images using HI improved measurement consistency and reproducibility among observers when compared to fundamental imaging. HI has been embraced by the imaging community at large as it improves the quality and data validity of US studies, especially in difficult-to-image cases. Even with the limitations of the first generation THI, HI improved the quality and measurability of many of the downlinked images from the ISS and should be an option utilized with cardiac imaging on board the ISS in all future space missions.

  7. Improving strand quality of upland oaks for use in oriented strand board

    Treesearch

    David B. DeValliance; Jody D. Gray; Shawn T. Grushecky

    2013-01-01

    Past research estimates that more than 1 million tons of oak logging residues go unused in West Virginia each year. Much research has been done investigating potential products and markets for this underutilized resource. West Virginia is home to an oriented strand board (OSB) producer that consumes large volumes of small diameter, low quality round wood. However, the...

  8. Quality Control Review of the PricewaterhouseCoopers LLP FY 2014 Single Audit of Carnegie Mellon University

    DTIC Science & Technology

    2015-12-17

    No. DODIG-2016-034 D E C E M B E R 1 7 , 2 0 1 5 Quality Control Review of the PricewaterhouseCoopers LLP FY 2014 Single Audit of Carnegie ...ALEXANDRIA, VIRGINIA 22350-1500 December 17, 2015 Audit Partner PricewaterhouseCoopers LLP Board of Trustees Carnegie Mellon University Director, Sponsored...Projects Accounting Carnegie Mellon University SUBJECT: Quality Control Review of the PricewaterhouseCoopers LLP FY 2014 Single Audit of Carnegie

  9. Managerial implications of corporate board involvement and perceived market competition for quality improvement in nursing homes.

    PubMed

    Weech-Maldonado, R; Zinn, J S; Brannon, D

    1999-01-01

    This study examines the relationships among corporate board involvement, total quality management (TQM) adoption, perceived market competition, and the perceived effect of quality improvement (QI) activities for a sample of nursing homes in Pennsylvania. The findings of this study have several implications for healthcare managers interested in maximizing the effectiveness of QI efforts. Board involvement in quality improvement was an important predictor of QI outcomes in the areas of finance, resident care, and human resources. However, TQM adoption had a positive effect on human resources outcomes only. These findings suggest that board involvement in any organized form of QI may be more important than the adoption of a formal TQM program in the nursing home industry. TQM's emphasis on employee empowerment may account for its positive influence on human resources. Perceived competition was associated with better financial outcomes. Low-cost leadership can be a key to survival in more competitive markets, requiring a focus on efficiency and productivity issues in QI efforts. By focusing on process improvement, the facilities may achieve cost reductions that can result in an improved financial position. Facilities perceived to be in more competitive environments were also more likely to adopt TQM. This is consistent with the assertion by resource-dependence theorists that organizations facing competition for resources must be responsive to the needs of resource-providing constituencies.

  10. [Technological innovations in radiation oncology require specific quality controls].

    PubMed

    Lenaerts, E; Mathot, M

    2014-01-01

    During the last decade, the field of radiotherapy has benefited from major technological innovations and continuously improving treatment efficacy, comfort and safety of patients. This mainly concerns the imaging techniques that allow 4D CT scan recording the respiratory phases, on-board imaging on linear accelerators that ensure perfect positioning of the patient for treatment and irradiation techniques that reduce very significantly the duration of treatment sessions without compromising quality of the treatment plan, including IMRT (Intensity Modulated Radiation Therapy) and VMAT (Volumetric Modulated Arc therapy). In this context of rapid technological change, it is the responsibility of medical physicists to regularly and precisely monitor the perfect functioning of new techniques to ensure patient safety. This requires the use of specific quality control equipment best suited to these new techniques. We will briefly describe the measurement system Delta4 used to control individualized treatment plan for each patient treated with VMAT technology.

  11. WeaselBoard :

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mulder, John C.; Schwartz, Moses Daniel; Berg, Michael J.

    2013-10-01

    Critical infrastructures, such as electrical power plants and oil refineries, rely on programmable logic controllers (PLCs) to control essential processes. State of the art security cannot detect attacks on PLCs at the hardware or firmware level. This renders critical infrastructure control systems vulnerable to costly and dangerous attacks. WeaselBoard is a PLC backplane analysis system that connects directly to the PLC backplane to capture backplane communications between modules. WeaselBoard forwards inter-module traffic to an external analysis system that detects changes to process control settings, sensor values, module configuration information, firmware updates, and process control program (logic) updates. WeaselBoard provides zero-daymore » exploit detection for PLCs by detecting changes in the PLC and the process. This approach to PLC monitoring is protected under U.S. Patent Application 13/947,887.« less

  12. Spacecraft drag-free technology development: On-board estimation and control synthesis

    NASA Technical Reports Server (NTRS)

    Key, R. W.; Mettler, E.; Milman, M. H.; Schaechter, D. B.

    1982-01-01

    Estimation and control methods for a Drag-Free spacecraft are discussed. The functional and analytical synthesis of on-board estimators and controllers for an integrated attitude and translation control system is represented. The framework for detail definition and design of the baseline drag-free system is created. The techniques for solution of self-gravity and electrostatic charging problems are applicable generally, as is the control system development.

  13. Design of the Wind Tunnel Model Communication Controller Board. Degree awarded by Christopher Newport Univ. on Dec. 1998

    NASA Technical Reports Server (NTRS)

    Wilson, William C.

    1999-01-01

    The NASA Langley Research Center's Wind Tunnel Reinvestment project plans to shrink the existing data acquisition electronics to fit inside a wind tunnel model. Space limitations within a model necessitate a distributed system of Application Specific Integrated Circuits (ASICs) rather than a centralized system based on PC boards. This thesis will focus on the design of the prototype of the communication Controller board. A portion of the communication Controller board is to be used as the basis of an ASIC design. The communication Controller board will communicate between the internal model modules and the external data acquisition computer. This board is based around an Field Programmable Gate Array (FPGA), to allow for reconfigurability. In addition to the FPGA, this board contains buffer Random Access Memory (RAM), configuration memory (EEPROM), drivers for the communications ports, and passive components.

  14. A survey. Financial accounting and internal control functions pursued by hospital boards.

    PubMed

    Gavin, T A

    1984-09-01

    Justification for a board committee's existence is its ability to devote time to issues judged to be important by the full board. This seems to have happened. Multiple committees pursue more functions than the other committee structures. Boards lacking an FA/IC committee pursue significantly fewer functions than their counterparts with committees. Substantial respondent agreement exists on those functions most and least frequently pursued, those perceived to be most and least important, and those perceived to be most and least effectively undertaken. Distinctions between committee structures and the full board, noted in the previous paragraph, hold true with respect to the importance of functions. All board structures identified reviewing the budget and comparing it to actual results as important. Committee structures are generally more inclined to address functions related to the work of the independent auditor and the effectiveness of the hospital's system and controls than are full board structures. Functions related to the internal auditor are pursued least frequently by all FA/IC board structures. The following suggestions are made to help boards pay adequate attention to and obtain objective information about the financial affairs of their hospitals. Those boards that do not have some form of an FA/IC committee should consider starting one. Evidence shows chief financial officers have been a moving force in establishing and strengthening such committees. Boards having a joint or single committee structure should consider upgrading their structure to either a single committee or multiple committees respectively. The complexity of the healthcare environment requires that more FA/IC functions be addressed by the board. The board or its FA/IC committee(s) should meet with their independent CPA's, fiscal intermediary auditors, and internal auditors. Where the hospital lacks an internal audit function a study should be undertaken to determine the feasibility of

  15. 78 FR 37200 - Peanut Standards Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-20

    ...] Peanut Standards Board AGENCY: Agricultural Marketing Service, USDA. ACTION: Notice; request for... Secretary of Agriculture to establish a Peanut Standards Board (Board) for the purpose of advising the Secretary on quality and handling standards for domestically produced and imported peanuts. The initial...

  16. 76 FR 31574 - Peanut Standards Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-01

    ...] Peanut Standards Board AGENCY: Agricultural Marketing Service, USDA. ACTION: Notice; request for... Secretary of Agriculture to establish a Peanut Standards Board (Board) for the purpose of advising the Secretary on quality and handling standards for domestically produced and imported peanuts. The initial...

  17. 77 FR 56178 - Peanut Standards Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-12

    ...] Peanut Standards Board AGENCY: Agricultural Marketing Service, USDA. ACTION: Notice; request for... Secretary of Agriculture to establish a Peanut Standards Board (Board) for the purpose of advising the Secretary on quality and handling standards for domestically produced and imported peanuts. The initial...

  18. Teacher quality: a comparison of National Board-certified and non-Board-certified teachers of deaf students.

    PubMed

    Scheetz, Nanci A; Martin, David S

    2006-01-01

    THE STUDY was designed to identify specific components of teacher excellence, focusing initially on the characteristics of the small number of teachers of the deaf who are certified by the National Board for Professional Teaching Standards (NBPTS), then comparing those with the characteristics of other teachers identified as master teachers by university faculty in teacher preparation in deafness. Classroom observation, written lesson plans, teacher questionnaires on beliefs, and content analysis of interactive electronic focus groups were used to compare the two groups of teachers. Results indicated similarities between Board-certified and non-Board-certified master teachers in regard to teacher behaviors and commitment to well-founded pedagogical principles. Differences were found in classroom priorities and in the greater level of interconnectivity expressed by Board-certified teachers as the result of becoming Board certified. Recommendations are made for preparing teachers of deaf students.

  19. Quality Teaching in Addressing Student Achievement: A Comparative Study between National Board Certified Teachers and Other Teachers on the Kentucky Core Content Test Results

    ERIC Educational Resources Information Center

    Buecker, Harrie Lynne

    2010-01-01

    This dissertation focused on the link between quality teaching and its potential impact on student achievement. National Board Certification is used to represent quality teaching and student achievement is measured by the Kentucky Core Content Test. Data were gathered on the reading and mathematics scores of students of National Board Teachers who…

  20. Expert system for on-board satellite scheduling and control

    NASA Technical Reports Server (NTRS)

    Barry, John M.; Sary, Charisse

    1988-01-01

    An Expert System is described which Rockwell Satellite and Space Electronics Division (S&SED) is developing to dynamically schedule the allocation of on-board satellite resources and activities. This expert system is the Satellite Controller. The resources to be scheduled include power, propellant and recording tape. The activities controlled include scheduling satellite functions such as sensor checkout and operation. The scheduling of these resources and activities is presently a labor intensive and time consuming ground operations task. Developing a schedule requires extensive knowledge of the system and subsystems operations, operational constraints, and satellite design and configuration. This scheduling process requires highly trained experts anywhere from several hours to several weeks to accomplish. The process is done through brute force, that is examining cryptic mnemonic data off line to interpret the health and status of the satellite. Then schedules are formulated either as the result of practical operator experience or heuristics - that is rules of thumb. Orbital operations must become more productive in the future to reduce life cycle costs and decrease dependence on ground control. This reduction is required to increase autonomy and survivability of future systems. The design of future satellites require that the scheduling function be transferred from ground to on board systems.

  1. Fluid Power Multi-actuator Circuit Board with Microcomputer Control Option.

    ERIC Educational Resources Information Center

    McKechnie, R. E.; Vickers, G. W.

    1981-01-01

    Describes a portable fluid power engineering laboratory and class demonstration apparatus designed to enable students to design, build, and test multi-actuator circuits. Features a variety of standard pneumatic values and actuators fitted with quick disconnect couplings. Discusses sequencing circuit boards, microcomputer control, cost, and…

  2. Rapid toxicity detection in water quality control utilizing automated multispecies biomonitoring for permanent space stations

    NASA Technical Reports Server (NTRS)

    Morgan, E. L.; Young, R. C.; Smith, M. D.; Eagleson, K. W.

    1986-01-01

    The objective of this study was to evaluate proposed design characteristics and applications of automated biomonitoring devices for real-time toxicity detection in water quality control on-board permanent space stations. Simulated tests in downlinking transmissions of automated biomonitoring data to Earth-receiving stations were simulated using satellite data transmissions from remote Earth-based stations.

  3. [Investigation on production process quality control of traditional Chinese medicine--Banlangen granule as an example].

    PubMed

    Tan, Manrong; Yan, Dan; Qiu, Lingling; Chen, Longhu; Yan, Yan; Jin, Cheng; Li, Hanbing; Xiao, Xiaohe

    2012-04-01

    For the quality management system of herbal medicines, intermediate and finished products it exists the " short board" effect of methodologies. Based on the concept of process control, new strategies and new methods of the production process quality control had been established with the consideration of the actual production of traditional Chinese medicine an the characteristics of Chinese medicine. Taking Banlangen granule as a practice example, which was effective and widespread application, character identification, determination of index components, chemical fingerprint and biometrics technology were sequentially used respectively to assess the quality of Banlangen herbal medicines, intermediate (water extraction and alcohol precipitation) and finished product. With the transfer rate of chemical information and biological potency as indicators, the effectiveness and transmission of the above different assessments and control methods had been researched. And ultimately, the process quality control methods of Banlangen granule, which were based on chemical composition analysis-biometric analysis, had been set up. It can not only validly solute the current status that there were many manufacturers varying quality of Banlangen granule, but also ensure and enhance its clinical efficacy. Furthermore it provided a foundation for the construction of the quality control of traditional Chinese medicine production process.

  4. 77 FR 44555 - Partial Approval and Disapproval of Air Quality Implementation Plans; Arizona; State Board...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-30

    .... ARS 49-478(B) establishes the compositional requirements of the county Air Quality Hearing Boards... County Code 17.04.190 (``Composition'') generally mirrors the language or ARS 49-478 but also includes... membership requirement of ARS 49-478 to interests in persons subject to enforcement orders. However, this...

  5. Feedback control system based on a remote operated PID controller implemented using mbed NXP LPC1768 development board

    NASA Astrophysics Data System (ADS)

    Pricop, Emil; Zamfir, Florin; Paraschiv, Nicolae

    2015-11-01

    Process control is a challenging research topic for both academia and industry for a long time. Controllers evolved from the classical SISO approach to modern fuzzy or neuro-fuzzy embedded devices with networking capabilities, however PID algorithms are still used in the most industrial control loops. In this paper, we focus on the implementation of a PID controller using mbed NXP LPC1768 development board. This board integrates a powerful ARM Cortex- M3 core and has networking capabilities. The implemented controller can be remotely operated by using an Internet connection and a standard Web browser. The main advantages of the proposed embedded system are customizability, easy operation and very low power consumption. The experimental results obtained by using a simulated process are analysed and shows that the implementation can be done with success in industrial applications.

  6. Hospital board oversight of quality and safety: a stakeholder analysis exploring the role of trust and intelligence.

    PubMed

    Millar, Ross; Freeman, Tim; Mannion, Russell

    2015-06-16

    Hospital boards, those executive members charged with developing appropriate organisational strategies and cultures, have an important role to play in safeguarding the care provided by their organisation. However, recent concerns have been raised over boards' ability to enact their duty to ensure the quality and safety of care. This paper offers critical reflection on the relationship between hospital board oversight and patient safety. In doing so it highlights new perspectives and suggestions for developing this area of study. The article draws on 10 interviews with key informants and policy actors who form part of the 'issue network' interested in the promotion of patient safety in the English National Health Service. The interviews surfaced a series of narratives regarding hospital board oversight of patient safety. These elaborated on the role of trust and intelligence in highlighting the potential dangers and limitations of approaches to hospital board oversight which have been narrowly focused on a risk-based view of organisational performance. In response, a need to engage with the development of trust based organisational relationships is identified, in which effective board oversight is built on 'trust' characterised by styles of leadership and behaviours that are attentive to the needs and concerns of both staff and patients. Effective board oversight also requires the gathering and triangulating of 'intelligence' generated from both national and local information sources. We call for a re-imagination of hospital board oversight in the light of these different perspectives and articulate an emerging research agenda in this area.

  7. School Board Policy As a Control Mechanism in Curriculum Challenges.

    ERIC Educational Resources Information Center

    Adler, Louise

    1993-01-01

    This journal article examines how school board policies are used to control the controversies that often surround curriculum challenges. Specific key provisions of model policies and actual policies from California are analyzed to suggest ideal policy provisions. In a longitudinal study, over 42 percent of the 1,000-plus school districts in…

  8. 8. DETAIL OF COMPUTER SCREEN AND CONTROL BOARDS: LEFT SCREEN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. DETAIL OF COMPUTER SCREEN AND CONTROL BOARDS: LEFT SCREEN TRACKS RESIDUAL CHLORINE; INDICATES AMOUNT OF SUNLIGHT WHICH ENABLES OPERATOR TO ESTIMATE NEEDED CHLORINE; CENTER SCREEN SHOWS TURNOUT STRUCTURES; RIGHT SCREEN SHOWS INDICATORS OF ALUMINUM SULFATE TANK FARM. - F. E. Weymouth Filtration Plant, 700 North Moreno Avenue, La Verne, Los Angeles County, CA

  9. Who Controls the Board in Non-Profit Organizations? The Case of Private Higher Education Institutions in Colombia

    ERIC Educational Resources Information Center

    Bradford, Henry; Guzmán, Alexander; Restrepo, José Manuel; Trujillo, María-Andrea

    2018-01-01

    How should the governance system in a non-membership non-profit organization be designed? This organizational form has no shareholders; instead, donors provide funds. Thus, at the organizational level, the board of directors could have all the power. Under this legal form, who controls the board? If too powerful, boards could misuse resources or…

  10. Another level of leadership: nurses on boards.

    PubMed

    Bleich, Michael R

    2014-12-01

    The movement to place nurses on boards of directors is growing, enriching boards with individuals possessing knowledge of clinical quality tied to care delivery models, human resource competencies and management, finance, and organizational change. Professional development educators are poised to advance a board's capacity to address complex health care problems.

  11. An active balance board system with real-time control of stiffness and time-delay to assess mechanisms of postural stability.

    PubMed

    Cruise, Denise R; Chagdes, James R; Liddy, Joshua J; Rietdyk, Shirley; Haddad, Jeffrey M; Zelaznik, Howard N; Raman, Arvind

    2017-07-26

    Increased time-delay in the neuromuscular system caused by neurological disorders, concussions, or advancing age is an important factor contributing to balance loss (Chagdes et al., 2013, 2016a,b). We present the design and fabrication of an active balance board system that allows for a systematic study of stiffness and time-delay induced instabilities in standing posture. Although current commercial balance boards allow for variable stiffness, they do not allow for manipulation of time-delay. Having two controllable parameters can more accurately determine the cause of balance deficiencies, and allows us to induce instabilities even in healthy populations. An inverted pendulum model of human posture on such an active balance board predicts that reduced board rotational stiffness destabilizes upright posture through board tipping, and limit cycle oscillations about the upright position emerge as feedback time-delay is increased. We validate these two mechanisms of instability on the designed balance board, showing that rotational stiffness and board time-delay induced the predicted postural instabilities in healthy, young adults. Although current commercial balance boards utilize control of rotational stiffness, real-time control of both stiffness and time-delay on an active balance board is a novel and innovative manipulation to reveal balance deficiencies and potentially improve individualized balance training by targeting multiple dimensions contributing to standing balance. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Improving NGDC Track-line Data Quality Control

    NASA Astrophysics Data System (ADS)

    Chandler, M. T.; Wessel, P.

    2004-12-01

    Ship-board gravity, magnetic and bathymetry data archived at the National Geophysical Data Center (NGDC) represent decades of seagoing research, containing over 4,500 cruises. Cruise data remain relevent despite the prominence of satellite altimetry-derived global grids because many geologic processes remain resolvable by oceanographic research alone. Due to the tremendous investment put forth by scientists and taxpayers to compile this vast archive and the significant errors found within it, additional quality assessment and corrections are warranted. These can best be accomplished by adding to existing quality control measures at NGDC. We are currently developing open source software to provide additional quality control. Along with NGDC's current sanity checking, new data at NGDC will also be subjected to an along-track ``sniffer'' which will detect and flag suspicious data for later graphical inspection using a visual editor. If new data pass these tests, they will undergo further scrutinization using a crossover error (COE) calculator which will compare new data values to existing values at points of intersection within the archive. Data passing these tests will be deemed ``quality data`` and suitable for permanent addition to the archive, while data that fail will be returned to the source institution for correction. Crossover errors will be stored and an online COE database will be available. The COE database will allow users to apply corrections to the NGDC track-line database to produce corrected data files. At no time will the archived data itself be modified. An attempt will also be made to reduce navigational errors for pre-GPS navigated cruises. Upon completion these programs will be used to explore and model systematic errors within the archive, generate correction tables for all cruises, and to quantify the error budget in marine geophysical observations. Software will be released and these procedures will be implemented in cooperation with NGDC

  13. On-board closed-loop congestion control for satellite based packet switching networks

    NASA Technical Reports Server (NTRS)

    Chu, Pong P.; Ivancic, William D.; Kim, Heechul

    1993-01-01

    NASA LeRC is currently investigating a satellite architecture that incorporates on-board packet switching capability. Because of the statistical nature of packet switching, arrival traffic may fluctuate and thus it is necessary to integrate congestion control mechanism as part of the on-board processing unit. This study focuses on the closed-loop reactive control. We investigate the impact of the long propagation delay on the performance and propose a scheme to overcome the problem. The scheme uses a global feedback signal to regulate the packet arrival rate of ground stations. In this scheme, the satellite continuously broadcasts the status of its output buffer and the ground stations respond by selectively discarding packets or by tagging the excessive packets as low-priority. The two schemes are evaluated by theoretical queuing analysis and simulation. The former is used to analyze the simplified model and to determine the basic trends and bounds, and the later is used to assess the performance of a more realistic system and to evaluate the effectiveness of more sophisticated control schemes. The results show that the long propagation delay makes the closed-loop congestion control less responsive. The broadcasted information can only be used to extract statistical information. The discarding scheme needs carefully-chosen status information and reduction function, and normally requires a significant amount of ground discarding to reduce the on-board packet loss probability. The tagging scheme is more effective since it tolerates more uncertainties and allows a larger margin of error in status information. It can protect the high-priority packets from excessive loss and fully utilize the downlink bandwidth at the same time.

  14. Development, application, and validation of a survey for infectious disease control practices at equine boarding facilities.

    PubMed

    Kirby, Alanna T; Traub-Dargatz, Josie L; Hill, Ashley E; Kogan, Lori R; Morley, Paul S; Heird, James C

    2010-11-15

    To develop a questionnaire for self-assessment of biosecurity practices at equine boarding facilities and to evaluate infectious disease control practices in these facilities in Colorado. Cross-sectional study. 64 equine boarding facilities in Colorado. Survey questions were rated according to importance for prevention and containment of equine infectious diseases. Point values (range, 0 to 20) were assigned for possible responses, with greater values given for optimal infection control methods. Questionnaires were mailed to equine boarding facilities in Colorado advertised on the World Wide Web. Survey responses were compared with assessments made by a member of the research team during visits to 30 randomly selected facilities. Agreement among results was analyzed via a kappa test and rated as poor, fair, moderate, substantial, or nearly perfect. Survey responses were received for 64 of 163 (39%) equine boarding facilities. Scores ranged from 106 to 402 points (maximum possible score, 418). Most facilities received better scores for movement and housing of equids than for other sections of the survey. Respondents at 24 of 48 (50%) facilities that routinely received new equids reported isolation of new arrivals. Agreement between self-assessment by survey respondents and evaluation by a member of the research team was determined to be fair to substantial. Most equine boarding facilities have opportunities to improve measures for prevention or containment of contagious diseases (eg, isolation of newly arrived equids and use of written health management protocols). Most self-assessments of infection control practices were accurate.

  15. Quality improvement of laminated board made from oil palm trunk at various outer layer using phenol formaldehyde adhesive

    NASA Astrophysics Data System (ADS)

    Hartono, R.; Sucipto, T.

    2018-02-01

    Characteristic of laminated board from oil palm trunk (OPT) is very low in quality. The effort to improved it’s quality done by using the outer layer from high density wood. The purpose of this experiment was to analyzed the effects of the outer layer on physical and mechanical properties of OPT and to obtain optimum treatment to fulfills JAS 234:2003. All of laminated board was made of 3 layers, and for the middle layer was made by densified-OPT. Then for the outer layer was made of sengon and meranti wood. The sample size was 5 cm (width) × 3 cm (thick) × 45 cm (length). The various outer layer of laminated board were A (OPT/densified OPT/OPT); B (Sengon/densified OPT/OPT); C (Sengon/densified OPT/sengon); D (Meranti/densified OPT/OPT) and E (Meranti/densified OPT/meranti). The results showed that the moisture content, density, thickness swelling, delamination, MOR and MOE were 6.10-8.48%; 0.40-0.63 g/cm3; 6.43-13.20%; 0%; 168.79-438.29 kg/cm2 and 30115-100454 kg/cm2, respectively. The moisture content and delamination fulfills JAS 234:2003, while density and thickness swelling did not fulfill standard. Whereas for MOR and MOE value, only type D and E that fulfill standard. There are strongth relationship between density and mechanical properties, such as MOR and MOE value. The optimum treatment in this reseach to made laminated board made from OPT was type D that using the meranti as outer layer.

  16. Testing of the on-board attitude determination and control algorithms for SAMPEX

    NASA Technical Reports Server (NTRS)

    Mccullough, Jon D.; Flatley, Thomas W.; Henretty, Debra A.; Markley, F. Landis; San, Josephine K.

    1993-01-01

    Algorithms for on-board attitude determination and control of the Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX) have been expanded to include a constant gain Kalman filter for the spacecraft angular momentum, pulse width modulation for the reaction wheel command, an algorithm to avoid pointing the Heavy Ion Large Telescope (HILT) instrument boresight along the spacecraft velocity vector, and the addition of digital sun sensor (DSS) failure detection logic. These improved algorithms were tested in a closed-loop environment for three orbit geometries, one with the sun perpendicular to the orbit plane, and two with the sun near the orbit plane - at Autumnal Equinox and at Winter Solstice. The closed-loop simulator was enhanced and used as a truth model for the control systems' performance evaluation and sensor/actuator contingency analysis. The simulations were performed on a VAX 8830 using a prototype version of the on-board software.

  17. An Intelligent System for Monitoring the Microgravity Environment Quality On-Board the International Space Station

    NASA Technical Reports Server (NTRS)

    Lin, Paul P.; Jules, Kenol

    2002-01-01

    An intelligent system for monitoring the microgravity environment quality on-board the International Space Station is presented. The monitoring system uses a new approach combining Kohonen's self-organizing feature map, learning vector quantization, and back propagation neural network to recognize and classify the known and unknown patterns. Finally, fuzzy logic is used to assess the level of confidence associated with each vibrating source activation detected by the system.

  18. Quality Leadership and Quality Control

    PubMed Central

    Badrick, Tony

    2003-01-01

    Different quality control rules detect different analytical errors with varying levels of efficiency depending on the type of error present, its prevalence and the number of observations. The efficiency of a rule can be gauged by inspection of a power function graph. Control rules are only part of a process and not an end in itself; just as important are the trouble-shooting systems employed when a failure occurs. 'Average of patient normals' may develop as a usual adjunct to conventional quality control serum based programmes. Acceptable error can be based on various criteria; biological variation is probably the most sensible. Once determined, acceptable error can be used as limits in quality control rule systems. A key aspect of an organisation is leadership, which links the various components of the quality system. Leadership is difficult to characterise but its key aspects include trust, setting an example, developing staff and critically setting the vision for the organisation. Organisations also have internal characteristics such as the degree of formalisation, centralisation, and complexity. Medical organisations can have internal tensions because of the dichotomy between the bureaucratic and the shadow medical structures. PMID:18568046

  19. Principles and Practices for Quality Assurance and Quality Control

    USGS Publications Warehouse

    Jones, Berwyn E.

    1999-01-01

    Quality assurance and quality control are vital parts of highway runoff water-quality monitoring projects. To be effective, project quality assurance must address all aspects of the project, including project management responsibilities and resources, data quality objectives, sampling and analysis plans, data-collection protocols, data quality-control plans, data-assessment procedures and requirements, and project outputs. Quality control ensures that the data quality objectives are achieved as planned. The historical development and current state of the art of quality assurance and quality control concepts described in this report can be applied to evaluation of data from prior projects.

  20. Refinement of boards' role required.

    PubMed

    Umbdenstock, R J

    1987-01-01

    The governing board's role in health care is not changing, but new competitive forces necessitate a refinement of the board's approach to fulfilling its role. In a free-standing, community, not-for-profit hospital, the board functions as though it were the "owner." Although it does not truly own the facility in the legal sense, the board does have legal, fiduciary, and financial responsibilities conferred on it by the state. In a religious-sponsored facility, the board fulfills these same obligations on behalf of the sponsoring institute, subject to the institute's reserved powers. In multi-institutional systems, the hospital board's power and authority depend on the role granted it by the system. Boards in all types of facilities are currently faced with the following challenges: Fulfilling their basic responsibilities, such as legal requirements, financial duties, and obligations for the quality of care. Encouraging management and the board itself to "think strategically" in attacking new competitive market forces while protecting the organization's traditional mission and values. Assessing recommended strategies in light of consequences if constituencies think the organization is abandoning its commitments. Boards can take several steps to match their mode of operation with the challenges of the new environment. Boards must rededicate themselves to the hospital's mission. Trustees must expand their understanding of health care trends and issues and their effect on the organization. Boards must evaluate and help strengthen management's performance, rather than acting as a "watchdog" in an adversarial position. Boards must think strategically, rather than focusing solely on operational details. Boards must evaluate the methods they use for conducting business.

  1. Development of an ATCA IPMI controller mezzanine board to be used in the ATCA developments for the ATLAS Liquid Argon upgrade

    NASA Astrophysics Data System (ADS)

    Dumont Dayot, Nicolas

    2012-01-01

    In the context of the LHC upgrade, we develop a new Read Out Driver (ROD) for the ATLAS Liquid Argon (LAr) community. ATCA and μTCA (Advanced/Micro Telecom Computing Architecture) is becoming a standard in high energy physics and a strong candidate to be used for boards and crates. We work to master ATCA and to integrate a large number of high speed links (96 links at 8.5 Gbps) on a ROD evaluation ATCA board. A versatile ATCA IPMI controller for ATCA boards which is FPGA Mezzanine Card (FMC) compliant has been developed to control the ROD evaluation board.

  2. 42 CFR 51c.304 - Governing board.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., location and hours of services, and quality-of-care audit procedures. ... Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR COMMUNITY HEALTH SERVICES Grants for Operating Community Health Centers § 51c.304 Governing board. A governing board for the...

  3. Enacting corporate governance of healthcare safety and quality: a dramaturgy of hospital boards in England.

    PubMed

    Freeman, Tim; Millar, Ross; Mannion, Russell; Davies, Huw

    2016-02-01

    The governance of patient safety is a challenging concern for all health systems. Yet, while the role of executive boards receives increased scrutiny, the area remains theoretically and methodologically underdeveloped. Specifically, we lack a detailed understanding of the performative aspects at play: what board members say and do to discharge their accountabilities for patient safety. This article draws on qualitative data from overt non-participant observation of four NHS hospital Foundation Trust boards in England. Applying a dramaturgical framework to explore scripting, setting, staging and performance, we found important differences between case study sites in the performative dimensions of processing and interpretation of infection control data. We detail the practices associated with these differences--the legitimation of current performance, the querying of data classification, and the naming and shaming of executives--to consider their implications. © 2015 The Authors. Sociology of Health & Illness published by John Wiley & Sons Ltd on behalf of Foundation for SHIL.

  4. Trends in the number and the quality of trial protocols involving children submitted to a French Institutional Review Board.

    PubMed

    Gautier, Isabelle; Janiaud, Perrine; Rollet, Nelly; André, Nicolas; Tsimaratos, Michel; Cornu, Catherine; Malik, Salma; Gentile, Stéphanie; Kassaï, Behrouz

    2017-08-23

    There is a great need for high quality clinical research for children. The European Pediatric Regulation aimed to improve the quality of clinical trials in order to increase the availability of treatments for children. The main purpose of this study was to assess the evolution of both the number and the quality of pediatric trial protocols that were submitted to a French Institutional Review Board (IRB00009118) before and after the initiation of the EU Pediatric Regulation. All protocols submitted to the IRB00009118 between 2003 and 2014 and conducting research on subjects under eighteen years of age were eligible. The quality of randomized clinical trials was assessed according to the guidelines developed by the Enhancing the QUAlity and Transparency Of health Research (EQUATOR) Network and ranked using the Jadad score. Out of 622 protocols submitted to the Institutional Review Board (IRB), 21% (133/622) included children. Among these 133 pediatric protocols, the number of submitted pediatric protocols doubled between the two studied periods. From 2003 to 2008, 47 protocols including 21 institutionally sponsored were submitted to the IRB and from 2009 until 2014, 86 protocols including 48 institutionally sponsored were submitted. No significant trend was observed on the quality of RCTs. The overall median score of RCTs on the Jadad scale was high (3.5), 70.0% of protocols had a Jadad score ≥ 3, and 30.0% had a score < 3. Following the EU Pediatric Regulation, the number of pediatric protocols submitted to the IRB00009118 tends to increase, but no change was noticed regarding their quality.

  5. QUALITY CONTROLS FOR PCR

    EPA Science Inventory

    The purpose of this presentation is to present an overview of the quality control (QC) sections of a draft EPA document entitled, "Quality Assurance/Quality Control Guidance for Laboratories Performing PCR Analyses on Environmental Samples." This document has been prepared by th...

  6. 75 FR 78779 - Order Approving Public Company Accounting Oversight Board Supplemental Budget Request To...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-16

    ...; Securities Exchange Act of 1934 Release No. 63526/December 10, 2010] Order Approving Public Company... Company Accounting Oversight Board (the ``PCAOB'') to oversee the audits of companies and related matters..., subject to approval by the Commission, auditing and related attestation, quality control, ethics, and...

  7. Digital Interface Board to Control Phase and Amplitude of Four Channels

    NASA Technical Reports Server (NTRS)

    Smith, Amy E.; Cook, Brian M.; Khan, Abdur R.; Lux, James P.

    2011-01-01

    An increasing number of parts are designed with digital control interfaces, including phase shifters and variable attenuators. When designing an antenna array in which each antenna has independent amplitude and phase control, the number of digital control lines that must be set simultaneously can grow very large. Use of a parallel interface would require separate line drivers, more parts, and thus additional failure points. A convenient form of control where single-phase shifters or attenuators could be set or the whole set could be programmed with an update rate of 100 Hz is needed to solve this problem. A digital interface board with a field-programmable gate array (FPGA) can simultaneously control an essentially arbitrary number of digital control lines with a serial command interface requiring only three wires. A small set of short, high-level commands provides a simple programming interface for an external controller. Parity bits are used to validate the control commands. Output timing is controlled within the FPGA to allow for rapid update rates of the phase shifters and attenuators. This technology has been used to set and monitor eight 5-bit control signals via a serial UART (universal asynchronous receiver/transmitter) interface. The digital interface board controls the phase and amplitude of the signals for each element in the array. A host computer running Agilent VEE sends commands via serial UART connection to a Xilinx VirtexII FPGA. The commands are decoded, and either outputs are set or telemetry data is sent back to the host computer describing the status and the current phase and amplitude settings. This technology is an integral part of a closed-loop system in which the angle of arrival of an X-band uplink signal is detected and the appropriate phase shifts are applied to the Ka-band downlink signal to electronically steer the array back in the direction of the uplink signal. It will also be used in the non-beam-steering case to compensate for

  8. 77 FR 52335 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety.... Background: The Advisory Board was established under the Energy Employees Occupational Illness Compensation...

  9. 77 FR 9254 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-16

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety.... Background: The Advisory Board was established under the Energy Employees Occupational Illness Compensation...

  10. 77 FR 69486 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-19

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... people. Background: The Advisory Board was established under the Energy Employees Occupational Illness...

  11. 76 FR 5814 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-02

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety...: The Advisory Board was established under the Energy Employees Occupational Illness Compensation...

  12. 75 FR 66769 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety...: The Advisory Board was established under the Energy Employees Occupational Illness Compensation...

  13. If Unprofessional Conduct Is Charged by the California Board of Medical Quality Assurance

    PubMed Central

    Regardie, Arnold G.

    1977-01-01

    The right of a physician to practice his or her chosen profession must be balanced against the right of the public to be protected from unprofessional conduct by physicians. By providing notice and a hearing before imposing discipline, if any, on a physician for unprofessional conduct, the California Board of Medical Quality Assurance meets the basic requirements of procedural due process. However, although the constitutional rights of the physician may be protected in this way, the administrative disciplinary process itself is likely to be an arduous experience. A basic understanding of the nature and legal effect of such disciplinary proceedings may assist a physician in defending against the charges. PMID:919549

  14. 32 CFR 631.9 - Duties and functions of boards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ENFORCEMENT AND CRIMINAL INVESTIGATIONS ARMED FORCES DISCIPLINARY CONTROL BOARDS AND OFF-INSTALLATION LIAISON AND OPERATIONS Armed Forces Disciplinary Control Boards § 631.9 Duties and functions of boards. The... 32 National Defense 4 2011-07-01 2011-07-01 false Duties and functions of boards. 631.9 Section...

  15. 32 CFR 631.9 - Duties and functions of boards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ENFORCEMENT AND CRIMINAL INVESTIGATIONS ARMED FORCES DISCIPLINARY CONTROL BOARDS AND OFF-INSTALLATION LIAISON AND OPERATIONS Armed Forces Disciplinary Control Boards § 631.9 Duties and functions of boards. The... 32 National Defense 4 2010-07-01 2010-07-01 true Duties and functions of boards. 631.9 Section 631...

  16. Board-to-Board Free-Space Optical Interconnections Passing through Boards for a Bookshelf-Assembled Terabit-Per-Second-Class ATM Switch.

    PubMed

    Hirabayashi, K; Yamamoto, T; Matsuo, S; Hino, S

    1998-05-10

    We propose free-space optical interconnections for a bookshelf-assembled terabit-per-second-class ATM switch. Thousands of arrayed optical beams, each having a rate of a few gigabits per second, propagate vertically to printed circuit boards, passing through some boards, and are connected to arbitrary transmitters and receivers on boards by polarization controllers and prism arrays. We describe a preliminary experiment using a 1-mm-pitch 2 x 2 beam-collimator array that uses vertical-cavity surface-emitting laser diodes. These optical interconnections can be made quite stable in terms of mechanical shock and temperature fluctuation by the attachment of reinforcing frames to the boards and use of an autoalignment system.

  17. Board task performance: An exploration of micro- and macro-level determinants of board effectiveness

    PubMed Central

    Minichilli, Alessandro; Zattoni, Alessandro; Nielsen, Sabina; Huse, Morten

    2012-01-01

    This paper addresses recent calls to narrow the micro–macro gap in management research (Bamberger, 2008), by incorporating a macro-level context variable (country) in exploring micro-level determinants of board effectiveness. Following the integrated model proposed by Forbes and Milliken (1999), we identify three board processes as micro-level determinants of board effectiveness. Specifically, we focus on effort norms, cognitive conflicts and the use of knowledge and skills as determinants of board control and advisory task performance. Further, we consider how two different institutional settings influence board tasks, and how the context moderates the relationship between processes and tasks. Our hypotheses are tested on a survey-based dataset of 535 medium-sized and large industrial firms in Italy and Norway, which are considered to substantially differ along legal and cultural dimensions. The findings show that: (i) Board processes have a larger potential than demographic variables to explain board task performance; (ii) board task performance differs significantly between boards operating in different contexts; and (iii) national context moderates the relationships between board processes and board task performance. Copyright © 2010 John Wiley & Sons, Ltd. PMID:23365485

  18. [On-site quality control of acupuncture randomized controlled trial: design of content and checklist of quality control based on PICOST].

    PubMed

    Li, Hong-Jiao; He, Li-Yun; Liu, Zhi-Shun; Sun, Ya-Nan; Yan, Shi-Yan; Liu, Jia; Zhao, Ye; Liu, Bao-Yan

    2014-02-01

    To effectively guarantee quality of randomized controlld trial (RCT) of acupuncture and develop reasonable content and checklist of on-site quality control, influencing factors on quality of acupuncture RCT are analyzed and scientificity of quality control content and feasibility of on-site manipulation are put into overall consideration. Based on content and checklist of on-site quality control in National 11th Five-Year Plan Project Optimization of Comprehensive Treatment Plan for TCM in Prevention and Treatment of Serious Disease and Clinical Assessment on Generic Technology and Quality Control Research, it is proposed that on-site quality control of acupuncture RCT should be conducted with PICOST (patient, intervention, comparison, out come, site and time) as core, especially on quality control of interveners' skills and outcome assessment of blinding, and checklist of on-site quality control is developed to provide references for undertaking groups of the project.

  19. 77 FR 43090 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-23

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Advisory Board was established under the Energy Employees Occupational Illness Compensation Program Act of...

  20. 75 FR 35496 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-22

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Advisory Board was established under the Energy Employees Occupational Illness Compensation Program Act of...

  1. 77 FR 32117 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-31

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Advisory Board was established under the Energy Employees Occupational Illness Compensation Program Act of...

  2. 76 FR 47590 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-05

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Advisory Board was established under the Energy Employees Occupational Illness Compensation Program Act of...

  3. Temperature Tolerant Evolvable Systems Utilizing FPGA Boards and Bias-Controlled Amplifiers

    NASA Technical Reports Server (NTRS)

    Kumar, Nikhil R.

    2005-01-01

    Space missions often require radiation and extreme-temperature hardened electronics to survive the harsh environments beyond Earth's atmosphere. Traditional approaches to preserve electronics incorporate shielding, insulation and redundancy at the expense of power and weight. However, a novel way of bypassing these problems is the concept of evolutionary hardware. A reconfigurable device, consisting of several switches interconnected with analog/digital parts, is controlled by an evolutionary processor (EP). When the EP detects degradation in the circuit it sends signals to reconfigure the switches, thus forming a new circuit with the desired output. This concept has been developed since the mid-l990s, but one problem remains-the EP cannot degrade substantially. For this reason, extensive testing at extreme temperatures (-180 to 120 C) has been done on devices found on FPGA boards (taking the role of the EP), such as the Analog to Digital and the Digital to Analog Converter. The EP is used in conjunction with a bias-controlled amplifier and a new prototype relay board, which is interconnected with 6 G4-FETs, a tri-input transistor-like element developed at JPL. The greatest improvements to be made lie in the reconfigurable device, so future design and testing of the G4-FET chip is required.

  4. New Cancer Prevention and Control Central Institutional Review Board Established | Division of Cancer Prevention

    Cancer.gov

    The NCI Central Institutional Review Board (CIRB) Initiative announced the establishment of the Cancer Prevention and Control (CPC) CIRB January 14, extending the benefits of centralized review to investigators participating in clinical trials sponsored by the Division of Cancer Prevention (DCP). |

  5. Quality Management and Building Government Information Services.

    ERIC Educational Resources Information Center

    Farrell, Maggie

    1998-01-01

    Discusses serving library-patron needs in terms of customer service and quality control. Highlights include tools for measuring the quality of service (e.g., the SERVQUAL survey), advisory boards or focus groups, library "service statements," changing patron needs, new information formats, and justifying depository library services. (JAK)

  6. [Quality control in anesthesiology].

    PubMed

    Muñoz-Ramón, J M

    1995-03-01

    The process of quality control and auditing of anesthesiology allows us to evaluate care given by a service and solve problems that are detected. Quality control is a basic element of care giving and is only secondarily an area of academic research; it is therefore a meaningless effort if the information does not serve to improve departmental procedures. Quality assurance procedures assume certain infrastructural requirements and an initial period of implementation and adjustment. The main objectives of quality control are the reduction of morbidity and mortality due to anesthesia, assurance of the availability and proper management of resources and, finally, the well-being and safety of the patient.

  7. 75 FR 1062 - Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-08

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC) In accordance with Section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC) announces, the followin...

  8. Expanding Educators' Contributions to Continuous Quality Improvement of American Board of Medical Specialties Maintenance of Certification.

    PubMed

    Nora, Lois Margaret; Pouwels, Mellie Villahermosa; Irons, Mira

    2016-01-01

    The American Board of Medical Specialties board certification has transformed into a career-long process of learning, assessment, and performance improvement through its Program for Maintenance of Certification (MOC). Medical educators across many medical professional organizations, specialty societies, and other institutions have played important roles in shaping MOC and tailoring its overarching framework to the needs of different specialties. This Commentary addresses potential barriers to engagement in work related to MOC for medical school (MS) and academic health center (AHC) educators and identifies reasons for, and ways to accomplish, greater involvement in this work. The authors present ways that medical and other health professions educators in these settings can contribute to the continuous improvement of the MOC program including developing educational and assessment activities, engaging in debate about MOC, linking MOC with institutional quality improvement activities, and pursuing MOC-related scholarship. MS- and AHC-based educators have much to offer this still-young and continually improving program, and their engagement is sought, necessary, and welcomed.

  9. 24 CFR 200.1535 - MAP Lender Review Board.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 2 2013-04-01 2013-04-01 false MAP Lender Review Board. 200.1535 Section 200.1535 Housing and Urban Development Regulations Relating to Housing and Urban Development... Lender Quality Assurance Enforcement § 200.1535 MAP Lender Review Board. (a) Authority—(1) Sanctions. The...

  10. 24 CFR 200.1535 - MAP Lender Review Board.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false MAP Lender Review Board. 200.1535 Section 200.1535 Housing and Urban Development Regulations Relating to Housing and Urban Development... Lender Quality Assurance Enforcement § 200.1535 MAP Lender Review Board. (a) Authority—(1) Sanctions. The...

  11. 24 CFR 200.1535 - MAP Lender Review Board.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false MAP Lender Review Board. 200.1535 Section 200.1535 Housing and Urban Development Regulations Relating to Housing and Urban Development... Lender Quality Assurance Enforcement § 200.1535 MAP Lender Review Board. (a) Authority—(1) Sanctions. The...

  12. 24 CFR 200.1535 - MAP Lender Review Board.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false MAP Lender Review Board. 200.1535 Section 200.1535 Housing and Urban Development Regulations Relating to Housing and Urban Development... Lender Quality Assurance Enforcement § 200.1535 MAP Lender Review Board. (a) Authority—(1) Sanctions. The...

  13. Commercial jet fuel quality control

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Strauss, K.H.

    1995-05-01

    The paper discusses the purpose of jet fuel quality control between the refinery and the aircraft. It describes fixed equipment, including various types of filters, and the usefulness and limitations of this equipment. Test equipment is reviewed as are various surveillance procedures. These include the Air Transport Association specification ATA 103, the FAA Advisory Circular 150/5230-4, the International Air Transport Association Guidance Material for Fuel Quality Control and Fuelling Service and the Guidelines for Quality Control at Jointly Operated Fuel Systems. Some past and current quality control problems are briefly mentioned.

  14. State survey of medical boards regarding abrupt loss of a prescriber of controlled substances.

    PubMed

    Sera, Leah; Brown, Micke; McPherson, Mary Lynn; Walker, Kathryn A; Klein-Schwartz, Wendy

    The purpose of the study was to evaluate states' experiences with abrupt changes in controlled substances (CS) prescribing, to determine whether states have action plans in place to manage such situations, and describe the components of any such plans. A survey of executive directors of 51 medical boards was conducted to evaluate states' experiences with abrupt changes in CS prescribing, the extent of consumer complaints attributed to these events, and the types of plans in place to manage these situations. Forty-six executive directors of medical boards responded. Twenty boards (43.5 percent) confirmed that their state had experienced abrupt loss of CS providers and 11 (55 percent) of these executive directors indicated that the loss resulted in increased consumer complaints. The majority of executive directors (86 percent) had no action plan. Six executive directors reported some type of action plan or process consisting of regulatory action, patient-provider connection, professional education, patient education, or public notice. Most states do not have operational plans in place. However, a few have key strategies that may be useful in addressing potential problems following abrupt loss of a CS prescriber. State medical boards can play a significant role in the development of comprehensive preparedness plans to mitigate damage from the loss of CS prescribers in the community.

  15. Hospital board effectiveness: relationships between governing board composition and hospital financial viability.

    PubMed Central

    Molinari, C; Morlock, L; Alexander, J; Lyles, C A

    1993-01-01

    OBJECTIVE. Two theories--agency and managerialism--are compared with respect to their usefulness in explaining the role of insiders on the hospital board: whether their participation enhances or impairs board financial decision making. DATA SOURCES/STUDY SETTING. The study used 1985 hospital financial and governing board data for a representative sample of acute care California hospitals. STUDY DESIGN. Relationships were examined cross-sectionally between the presence or absence of insiders on the board and measures of hospital financial viability while controlling for the organizational factors of system affiliation, ownership, size, region, and corporate restructuring. PRINCIPAL FINDINGS. Multiple regression analysis found significant relationships between insider (CEO, medical staff) participation and hospital viability. CONCLUSIONS. These results support the managerial theory of governance by suggesting that the CEO and medical staff provide informational advantages to the hospital governing board. However, the cross-sectional design points to the need for future longitudinal studies in order to sequence these relationships between insider participation and improved hospital viability. PMID:8344824

  16. Modular space vehicle boards, control software, reprogramming, and failure recovery

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Judd, Stephen; Dallmann, Nicholas; McCabe, Kevin

    A space vehicle may have a modular board configuration that commonly uses some or all components and a common operating system for at least some of the boards. Each modular board may have its own dedicated processing, and processing loads may be distributed. The space vehicle may be reprogrammable, and may be launched without code that enables all functionality and/or components. Code errors may be detected and the space vehicle may be reset to a working code version to prevent system failure.

  17. Requirements for Printed Wiring Boards

    NASA Technical Reports Server (NTRS)

    1984-01-01

    In order to maintain the high standards of the NASA printed wiring programs, this publication: prescribes NASA's requirements for assuring reliable rigid printed wiring boards; describes and incorporates basic considerations necessary to assure reliable rigid printed wiring boards; establishes the supplier's responsibility to train and certify personnel; provides for supplier documentation of the fabrication and inspection procedures to be used for NASA work, including supplier innovations and changes in technology; and provides visual workmanship standards to aid those responsible for determining quality conformance to the established requirements.

  18. Talking about the Facts of Education Data with School Board Members

    ERIC Educational Resources Information Center

    Data Quality Campaign, 2014

    2014-01-01

    The Data Quality Campaign and the National School Boards Association's Center for Public Education prepared this document to help school board members respond to questions about education data, explain its importance to improving school and student performance, and understand how boards can help ensure student privacy.

  19. 78 FR 29754 - Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-21

    ... mild-Traumatic Injury Workgroup. There will be 15 minutes allotted for public comments at the end of... Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC) In accordance with...-being; and (3) conduct and assist in research and control activities related to injury. The Board of...

  20. The American Board of Radiology Perspective on Maintenance of Certification: Part IV: Practice quality improvement in radiologic physics.

    PubMed

    Frey, G Donald; Ibbott, Geoffrey S; Morin, Richard L; Paliwal, Bhudatt R; Thomas, Stephen R; Bosma, Jennifer

    2007-11-01

    Recent initiatives of the American Board of Medical Specialties (ABMS) in the area of maintenance of certification (MOC) have been reflective of the response of the medical community to address public concerns regarding quality of care, medical error reduction, and patient safety. In March 2000, the 24 member boards of the ABMS representing all medical subspecialties in the USA agreed to initiate specialty-specific maintenance of certification (MOC) programs. The American Board of Radiology (ABR) MOC program for diagnostic radiology, radiation oncology, and radiologic physics has been developed, approved by the ABMS, and initiated with full implementation for all three disciplines beginning in 2007. The overriding objective of MOC is to improve the quality of health care through diplomate-initiated learning and quality improvement. The four component parts to the MOC process are: Part I: Professional standing, Part II: Evidence of life long learning and periodic self-assessment, Part III: Cognitive expertise, and Part IV: Evaluation of performance in practice (with the latter being the focus of this paper). The key components of Part IV require a physicist-based response to demonstrate commitment to practice quality improvement (PQI) and progress in continuing individual competence in practice. Diplomates of radiologic physics must select a project to be completed over the ten-year cycle that potentially can improve the quality of the diplomate's individual or systems practice and enhance the quality of care. Five categories have been created from which an individual radiologic physics diplomate can select one required PQI project: (1) Safety for patients, employees, and the public, (2) accuracy of analyses and calculations, (3) report turnaround time and communication issues, (4) practice guidelines and technical standards, and (5) surveys (including peer review of self-assessment reports). Each diplomate may select a project appropriate for an individual

  1. Board self-evaluation: the Bayside Health experience.

    PubMed

    Duncan-Marr, Alison; Duckett, Stephen J

    2005-08-01

    Board evaluation is a critical component of good governance in any organisation. This paper describes the board self-evaluation process used by Bayside Health, a public health service in Melbourne. The question of how governing boards can assess their performance has received increasing attention over the past decade. In particular, the increasing demand for accountability to shareholders and regulators experienced by corporate sector Boards has resulted in greater scrutiny of board performance, with the market and the balance sheet providing some basis for assessment. Performance evaluation of governing boards in the public sector has been more challenging. Performance evaluation is complex in a sector that is not simply driven by the bottom line, where the stakeholders involve both government and the broader community, and where access to, and the quality and safety of the services provided, are often the major public criteria by which performance may be judged. While some practices from the corporate sector can be applied successfully in the public sector, this is not always the case, and public sector boards such as the Board of Directors of Bayside Health have been developing ways to evaluate and improve their performance.

  2. Smart Board in the Music Classroom

    ERIC Educational Resources Information Center

    Baker, Jean

    2007-01-01

    A Smart Board is an interactive whiteboard connected to a computer and a data projector. Images can be projected on the board, and the Smart Board can be used as a computer. A person can control the computer using his finger, and can mark directly on the screen using various colors. Best of all, users can easily import many types of information,…

  3. 78 FR 69093 - Performance Review Board Members

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-18

    ... Review Board Members AGENCY: Centers for Disease Control and Prevention (CDC), Department of Health and... Performance Review Board Members who are reviewing performance for Fiscal Year 2013. FOR FURTHER INFORMATION... Performance Review Board Members be published in the Federal Register. The following persons will serve on the...

  4. Controlled impact demonstration on-board (interior) photographic system

    NASA Technical Reports Server (NTRS)

    May, C. J.

    1986-01-01

    Langley Research Center (LaRC) was responsible for the design, manufacture, and integration of all hardware required for the photographic system used to film the interior of the controlled impact demonstration (CID) B-720 aircraft during actual crash conditions. Four independent power supplies were constructed to operate the ten high-speed 16 mm cameras and twenty-four floodlights. An up-link command system, furnished by Ames Dryden Flight Research Facility (ADFRF), was necessary to activate the power supplies and start the cameras. These events were accomplished by initiation of relays located on each of the photo power pallets. The photographic system performed beyond expectations. All four power distribution pallets with their 20 year old Minuteman batteries performed flawlessly. All 24 lamps worked. All ten on-board high speed (400 fps) 16 mm cameras containing good resolution film data were recovered.

  5. 40 CFR 75.21 - Quality assurance and quality control requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Quality assurance and quality control... PROGRAMS (CONTINUED) CONTINUOUS EMISSION MONITORING Operation and Maintenance Requirements § 75.21 Quality assurance and quality control requirements. (a) Continuous emission monitoring systems. The owner or...

  6. 40 CFR 51.359 - Quality control.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 2 2013-07-01 2013-07-01 false Quality control. 51.359 Section 51.359....359 Quality control. Quality control measures shall insure that emission testing equipment is calibrated and maintained properly, and that inspection, calibration records, and control charts are...

  7. 40 CFR 51.359 - Quality control.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 2 2010-07-01 2010-07-01 false Quality control. 51.359 Section 51.359....359 Quality control. Quality control measures shall insure that emission testing equipment is calibrated and maintained properly, and that inspection, calibration records, and control charts are...

  8. 40 CFR 51.359 - Quality control.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 2 2011-07-01 2011-07-01 false Quality control. 51.359 Section 51.359....359 Quality control. Quality control measures shall insure that emission testing equipment is calibrated and maintained properly, and that inspection, calibration records, and control charts are...

  9. 40 CFR 51.359 - Quality control.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 2 2012-07-01 2012-07-01 false Quality control. 51.359 Section 51.359....359 Quality control. Quality control measures shall insure that emission testing equipment is calibrated and maintained properly, and that inspection, calibration records, and control charts are...

  10. Quality control in gastrointestinal surgery.

    PubMed

    Ramírez-Barba, Ector Jaime; Arenas-Moya, Diego; Vázquez-Guerrero, Arturo

    2011-01-01

    We analyzed the Mexican legal framework, identifying the vectors that characterize quality and control in gastrointestinal surgery. Quality is contemplated in the health protection rights determined according to the Mexican Constitution, established in the general health law and included as a specific goal in the actual National Development Plan and Health Sector Plan. Quality control implies planning, verification and application of corrective measures. Mexico has implemented several quality strategies such as certification of hospitals and regulatory agreements by the General Salubrity Council, creation of the National Health Quality Committee, generation of Clinical Practice Guidelines and the Certification of Medical Specialties, among others. Quality control in gastrointestinal surgery must begin at the time of medical education and continue during professional activities of surgeons, encouraging multidisciplinary teamwork, knowledge, abilities, attitudes, values and skills that promote homogeneous, safe and quality health services for the Mexican population.

  11. 40 CFR 52.1384 - Emission control regulations.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 4 2012-07-01 2012-07-01 false Emission control regulations. 52.1384 Section 52.1384 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... Quality and Exxon Company, USA, adopted by Board Order issued on June 12, 1998, by the Montana Board of...

  12. 40 CFR 52.1384 - Emission control regulations.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 4 2011-07-01 2011-07-01 false Emission control regulations. 52.1384 Section 52.1384 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... Quality and Exxon Company, USA, adopted by Board Order issued on June 12, 1998, by the Montana Board of...

  13. 40 CFR 52.1384 - Emission control regulations.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 4 2013-07-01 2013-07-01 false Emission control regulations. 52.1384 Section 52.1384 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... Quality and Exxon Company, USA, adopted by Board Order issued on June 12, 1998, by the Montana Board of...

  14. 40 CFR 52.1384 - Emission control regulations.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 4 2014-07-01 2014-07-01 false Emission control regulations. 52.1384 Section 52.1384 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... Quality and Exxon Company, USA, adopted by Board Order issued on June 12, 1998, by the Montana Board of...

  15. 77 FR 19017 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Energy Employees Occupational Illness Compensation Program [[Page 19018

  16. 78 FR 66938 - Board of Scientific Counselors, Office of Public Health Preparedness and Response, Board of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-07

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Public Health Preparedness and Response, Board of Scientific Counselors (BSC.... Contact Person for More Information: Marquita Black, Executive Assistant, Office of Science and Public...

  17. From Board to Bedside: How the Application of Financial Structures to Safety and Quality Can Drive Accountability in a Large Health Care System.

    PubMed

    Austin, J Matthew; Demski, Renee; Callender, Tiffany; Lee, K H Ken; Hoffman, Ann; Allen, Lisa; Radke, Deborah A; Kim, Yungjin; Werthman, Ronald J; Peterson, Ronald R; Pronovost, Peter J

    2017-04-01

    As the health care system in the United States places greater emphasis on the public reporting of quality and safety data and its use to determine payment, provider organizations must implement structures that ensure discipline and rigor regarding these data. An academic health system, as part of a performance management system, applied four key components of a financial reporting structure to support the goal of top-to-bottom accountability for improving quality and safety. The four components implemented by Johns Hopkins Medicine were governance, accountability, reporting of consolidated quality performance statements, and auditing. Governance is provided by the health system's Patient Safety and Quality Board Committee, which reviews goals and strategy for patient safety and quality, reviews quarterly performance for each entity, and holds organizational leaders accountable for performance. An accountability plan includes escalating levels of review corresponding to the number of months an entity misses the defined performance target for a measure. A consolidated quality statement helps inform the Patient Safety and Quality Board Committee and leadership on key quality and safety issues. An audit evaluates the efficiency and effectiveness of processes for data collection, validation, and storage, as to ensure the accuracy and completeness of quality measure reporting. If hospitals and health systems truly want to prioritize improvements in safety and quality, they will need to create a performance management system that ensures data validity and supports performance accountability. Without valid data, it is difficult to know whether a performance gap is due to data quality or clinical quality. Copyright © 2017 The Joint Commission. Published by Elsevier Inc. All rights reserved.

  18. General aviation fuel quality control

    NASA Technical Reports Server (NTRS)

    Poitz, H.

    1983-01-01

    Quality control measures for aviation gasoline, and some of the differences between quality control on avgas and mogas are discussed. One thing to keep in mind is that with motor gasoline you can always pull off to the side of the road. It's not so easy to do in an airplane. Consequently, there are reasons for having the tight specifications and the tight quality control measures on avgas as compared to motor gasoline.

  19. Network-based production quality control

    NASA Astrophysics Data System (ADS)

    Kwon, Yongjin; Tseng, Bill; Chiou, Richard

    2007-09-01

    This study investigates the feasibility of remote quality control using a host of advanced automation equipment with Internet accessibility. Recent emphasis on product quality and reduction of waste stems from the dynamic, globalized and customer-driven market, which brings opportunities and threats to companies, depending on the response speed and production strategies. The current trends in industry also include a wide spread of distributed manufacturing systems, where design, production, and management facilities are geographically dispersed. This situation mandates not only the accessibility to remotely located production equipment for monitoring and control, but efficient means of responding to changing environment to counter process variations and diverse customer demands. To compete under such an environment, companies are striving to achieve 100%, sensor-based, automated inspection for zero-defect manufacturing. In this study, the Internet-based quality control scheme is referred to as "E-Quality for Manufacturing" or "EQM" for short. By its definition, EQM refers to a holistic approach to design and to embed efficient quality control functions in the context of network integrated manufacturing systems. Such system let designers located far away from the production facility to monitor, control and adjust the quality inspection processes as production design evolves.

  20. Local School Board Members Need Quality Public Information That Informs Decisions, Empowers Action. Don't Make Decisions in the Dark

    ERIC Educational Resources Information Center

    Data Quality Campaign, 2014

    2014-01-01

    Local school board members need to be able to access and use high-quality data to make good decisions. Often this data is collected and stored locally, but information that is publicly reported by the state can provide additional value. Most state public reporting is designed to serve information needs, and are geared toward compliance with state…

  1. Why Not Charter School Boards?

    ERIC Educational Resources Information Center

    Schlechty, Phillip C.; Cole, Robert W.

    1994-01-01

    Argues that for a community to maintain control over its public schools it must make the school board accountable for the performance of the school and all of its employees. The authors suggest a new approach to school-board elections, addresses key elements needed in state legislation, and explains the existing roadblocks to change. (GLR)

  2. Opportunities and Challenges for Boards in Times of Change.

    ERIC Educational Resources Information Center

    Martin, Montez C., Jr.

    1997-01-01

    Argues that change is the rule rather than the exception for community college boards and provides suggestions for reducing the negative consequences of change. Discusses strategies for building effective teams and maintaining board unity and reviews the role of the chair during change. Describes a quality-based strategy for forming effective…

  3. Assisting people with multiple disabilities actively correct abnormal standing posture with a Nintendo Wii balance board through controlling environmental stimulation.

    PubMed

    Shih, Ching-Hsiang; Shih, Ching-Tien; Chu, Chiung-Ling

    2010-01-01

    The latest researches adopted software technology turning the Nintendo Wii Balance Board into a high performance change of standing posture (CSP) detector, and assessed whether two persons with multiple disabilities would be able to control environmental stimulation using body swing (changing standing posture). This study extends Wii Balance Board functionality for standing posture correction (i.e., actively adjust abnormal standing posture) to assessed whether two persons with multiple disabilities would be able to actively correct their standing posture by controlling their favorite stimulation on/off using a Wii Balance Board with a newly developed standing posture correcting program (SPCP). The study was performed according to an ABAB design, in which A represented baseline and B represented intervention phases. Data showed that both participants significantly increased time duration of maintaining correct standing posture (TDMCSP) to activate the control system to produce environmental stimulation during the intervention phases. Practical and developmental implications of the findings were discussed.

  4. 40 CFR 51.359 - Quality control.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 2 2014-07-01 2014-07-01 false Quality control. 51.359 Section 51.359 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS REQUIREMENTS FOR... to assure test accuracy. Computer control of quality assurance checks and quality control charts...

  5. Academic Governance Provided by Academic Boards within the Australian Higher Education Sector

    ERIC Educational Resources Information Center

    Vilkinas, Tricia; Peters, Margaret

    2014-01-01

    Academic boards play a key role in the maintenance of quality standards and the provision of strategic leadership on academic issues. The current research investigated the role provided at present to Australian universities through their academic boards. All universities described their academic boards as their principal academic body. The…

  6. 7 CFR 981.42 - Quality control.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Quality control. 981.42 Section 981.42 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Regulating Handling Quality Control § 981.42 Quality control. (a) Incoming. Except as provided in this...

  7. 7 CFR 981.42 - Quality control.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Quality control. 981.42 Section 981.42 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... Regulating Handling Quality Control § 981.42 Quality control. (a) Incoming. Except as provided in this...

  8. 7 CFR 981.42 - Quality control.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Quality control. 981.42 Section 981.42 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Regulating Handling Quality Control § 981.42 Quality control. (a) Incoming. Except as provided in this...

  9. 7 CFR 981.42 - Quality control.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Quality control. 981.42 Section 981.42 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Regulating Handling Quality Control § 981.42 Quality control. (a) Incoming. Except as provided in this...

  10. Closed to reason: time for accountability for the International Narcotic Control Board

    PubMed Central

    Small, Dan; Drucker, Ernest

    2007-01-01

    For more than two decades, the International Narcotic Control Board (INCB) has tried to stop harm reduction and its HIV prevention programs. This posture is based on a fundamental misunderstanding of their responsibilities and of drug addiction itself – i.e. as a public health and clinical care matter made criminal by decree. A recent focal point for the Board's action has been rejecting the use of supervised injection facilities to reduce morbidity and mortality of drug injectors. They single out individual countries and attempt to bully them into rejecting such programs under the banner of the United Nations (falsely) and in the name of international treaties. Their unrelenting and unjustified badgering of signatories to the international treaties that established the INCB is not only unjustified; it is an affront to one of the core purposes of the Board itself: to ensure adequate medical supplies and safe use of controlled substances. The INCB's ill-conceived obsession with intravenousaddiction as a crime flies in the face of the medical view and policies of the World Health Organization and the universally endorsed principles of the General Assembly of the United Nations. The latest target of the INCB is North America's only supervised injection facility, Insite, located in the inner city of Vancouver, Canada. Using the power of their office to meddle in matters of public health for individual nations is without medical, scientific or legal justification. But, most importantly, it is a matter of lifeand death for these most marginalized of citizens. The empirical evidence remains that a significant portion of the continued growth of the AIDS pandemic is due to injecting drug use, and the INCB's intrusion will inevitably result in additional deaths due to preventable HIV infections and drug overdoses. So we are very pleased to call to our readers' attention to a recent report produced by the Canadian HIV/AIDS Legal Network and the International Harm Reduction

  11. Why Become Pharmacy Compounding Accreditation Board Accredited?

    PubMed

    Dillon, L Rad

    2016-01-01

    The Pharmacy Compounding Accreditation Board's goal is to assist pharmacies to obtain formal recognition of their status as a high-quality and fully compliant provider of pharmaceuticals and patient services. This article provides a brief outline of the application process, the survey preparation, points of information about the actual survey, and suggestions on how to remain in compliance with Pharmacy Compounding Accreditation Board's standards. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

  12. 75 FR 81277 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-27

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... under the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the President...

  13. 76 FR 16787 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-25

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... was established under the Energy Employees Occupational Illness Compensation Program Act of 2000 to...

  14. 78 FR 11650 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-19

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... established under the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the...

  15. 78 FR 732 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-04

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... established under the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the...

  16. 75 FR 57281 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-20

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... under the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the President...

  17. 75 FR 11186 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-10

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the President on...

  18. 76 FR 61364 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-04

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the President on a...

  19. 78 FR 44954 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-25

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... established under the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the...

  20. 78 FR 21370 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-10

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the President on a...

  1. 76 FR 36925 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-23

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... under the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the President...

  2. 77 FR 62240 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-12

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... established under the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the...

  3. Regulating outdoor advertisement boards; employing spatial decision support system to control urban visual pollution

    NASA Astrophysics Data System (ADS)

    Wakil, K.; Hussnain, MQ; Tahir, A.; Naeem, M. A.

    2016-06-01

    Unmanaged placement, size, location, structure and contents of outdoor advertisement boards have resulted in severe urban visual pollution and deterioration of the socio-physical living environment in urban centres of Pakistan. As per the regulatory instruments, the approval decision for a new advertisement installation is supposed to be based on the locational density of existing boards and their proximity or remoteness to certain land- uses. In cities, where regulatory tools for the control of advertisement boards exist, responsible authorities are handicapped in effective implementation due to the absence of geospatial analysis capacity. This study presents the development of a spatial decision support system (SDSS) for regularization of advertisement boards in terms of their location and placement. The knowledge module of the proposed SDSS is based on provisions and restrictions prescribed in regulatory documents. While the user interface allows visualization and scenario evaluation to understand if the new board will affect existing linear density on a particular road and if it violates any buffer restrictions around a particular land use. Technically the structure of the proposed SDSS is a web-based solution which includes open geospatial tools such as OpenGeo Suite, GeoExt, PostgreSQL, and PHP. It uses three key data sets including road network, locations of existing billboards and building parcels with land use information to perform the analysis. Locational suitability has been calculated using pairwise comparison through analytical hierarchy process (AHP) and weighted linear combination (WLC). Our results indicate that open geospatial tools can be helpful in developing an SDSS which can assist solving space related iterative decision challenges on outdoor advertisements. Employing such a system will result in effective implementation of regulations resulting in visual harmony and aesthetic improvement in urban communities.

  4. Governance: current trends in board education, competencies, and qualifications.

    PubMed

    Nash, David B; Murphy, Sean Patrick; Mullaney, Anne D

    2011-01-01

    Hospitals and health system boards have been under enormous pressure to be more accountable. However, there is now an emerging trend of voluntary, mandatory, and payer-driven board education programs. Currently, 13 states have some type of formal, organized board education and development initiative, 10 of which are classified as "director and/ or board certificate" or "certification" programs; the American Hospital Association (through and with its affiliated Center for Healthcare Governance) has issued a Blue Ribbon Panel Report on core competencies. Finally, both Congress and the Securities and Exchange Commission require publicly traded companies to disclose board and director qualifications. This article reviews these emerging trends and posits that these developments are a necessary prerequisite not only for accountability and better governance but also for quality care.

  5. 7 CFR 1250.304 - Egg Board or Board.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Egg Board or Board. 1250.304 Section 1250.304... AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE EGG RESEARCH AND PROMOTION Egg Research and Promotion Order Definitions § 1250.304 Egg Board or Board. Egg Board or Board or other...

  6. 7 CFR 1250.304 - Egg Board or Board.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 10 2011-01-01 2011-01-01 false Egg Board or Board. 1250.304 Section 1250.304... AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE EGG RESEARCH AND PROMOTION Egg Research and Promotion Order Definitions § 1250.304 Egg Board or Board. Egg Board or Board or other...

  7. The History, Role, and Value of Public Directors on Certifying Boards: The American Board of Ophthalmology Experience.

    PubMed

    Anderson, Suzanne T; Nora, Lois M; McEntee, Christine W; Fitzgerald, Matthew E; Nugent, Samantha Guastella

    2016-09-01

    The mission of the American Board of Ophthalmology (ABO) is to serve the public by improving the quality of ophthalmic practice through a continuing certification process that fosters excellence and encourages continual learning. Since 2001, achieving this mission has been enhanced by including public directors in the ABO governance. We review the evolution of including nonprofessional members on the governing boards of professional regulatory and self-regulatory organizations generally, provide history about the incorporation of non-professional public directors into the governance structure of the American Board of Medical Specialties and the ABO, and offer insights about the perceived impact of public directors on the ABO. Copyright © 2016 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

  8. Air Quality Monitoring: Risk-Based Choices

    NASA Technical Reports Server (NTRS)

    James, John T.

    2009-01-01

    Air monitoring is secondary to rigid control of risks to air quality. Air quality monitoring requires us to target the credible residual risks. Constraints on monitoring devices are severe. Must transition from archival to real-time, on-board monitoring. Must provide data to crew in a way that they can interpret findings. Dust management and monitoring may be a major concern for exploration class missions.

  9. 14 CFR 21.139 - Quality control.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Quality control. 21.139 Section 21.139... PROCEDURES FOR PRODUCTS AND PARTS Production Certificates § 21.139 Quality control. The applicant must show that he has established and can maintain a quality control system for any product, for which he...

  10. 33 CFR 385.21 - Quality control.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Quality control. 385.21 Section... Processes § 385.21 Quality control. (a) The Corps of Engineers and the non-Federal sponsor shall prepare a quality control plan, in accordance with applicable Corps of Engineers regulations, for each product that...

  11. 14 CFR 21.139 - Quality control.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Quality control. 21.139 Section 21.139... PROCEDURES FOR PRODUCTS AND PARTS Production Certificates § 21.139 Quality control. The applicant must show that he has established and can maintain a quality control system for any product, for which he...

  12. 33 CFR 385.21 - Quality control.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Quality control. 385.21 Section... Processes § 385.21 Quality control. (a) The Corps of Engineers and the non-Federal sponsor shall prepare a quality control plan, in accordance with applicable Corps of Engineers regulations, for each product that...

  13. 33 CFR 385.21 - Quality control.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Quality control. 385.21 Section... Processes § 385.21 Quality control. (a) The Corps of Engineers and the non-Federal sponsor shall prepare a quality control plan, in accordance with applicable Corps of Engineers regulations, for each product that...

  14. 78 FR 38347 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-26

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... Employees Occupational Illness Compensation Program Act of 2000 to advise the President on a variety of...

  15. 40 CFR 136.7 - Quality assurance and quality control.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... quality control elements, where applicable, into the laboratory's documented standard operating procedure... quality control elements must be clearly documented in the written standard operating procedure for each... Methods contains QA/QC procedures in the Part 1000 section of the Standard Methods Compendium. The...

  16. 40 CFR 136.7 - Quality assurance and quality control.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... quality control elements, where applicable, into the laboratory's documented standard operating procedure... quality control elements must be clearly documented in the written standard operating procedure for each... Methods contains QA/QC procedures in the Part 1000 section of the Standard Methods Compendium. The...

  17. 40 CFR 136.7 - Quality assurance and quality control.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... quality control elements, where applicable, into the laboratory's documented standard operating procedure... quality control elements must be clearly documented in the written standard operating procedure for each... Methods contains QA/QC procedures in the Part 1000 section of the Standard Methods Compendium. The...

  18. On-board fault diagnostics for fly-by-light flight control systems using neural network flight processors

    NASA Astrophysics Data System (ADS)

    Urnes, James M., Sr.; Cushing, John; Bond, William E.; Nunes, Steve

    1996-10-01

    Fly-by-Light control systems offer higher performance for fighter and transport aircraft, with efficient fiber optic data transmission, electric control surface actuation, and multi-channel high capacity centralized processing combining to provide maximum aircraft flight control system handling qualities and safety. The key to efficient support for these vehicles is timely and accurate fault diagnostics of all control system components. These diagnostic tests are best conducted during flight when all facts relating to the failure are present. The resulting data can be used by the ground crew for efficient repair and turnaround of the aircraft, saving time and money in support costs. These difficult to diagnose (Cannot Duplicate) fault indications average 40 - 50% of maintenance activities on today's fighter and transport aircraft, adding significantly to fleet support cost. Fiber optic data transmission can support a wealth of data for fault monitoring; the most efficient method of fault diagnostics is accurate modeling of the component response under normal and failed conditions for use in comparison with the actual component flight data. Neural Network hardware processors offer an efficient and cost-effective method to install fault diagnostics in flight systems, permitting on-board diagnostic modeling of very complex subsystems. Task 2C of the ARPA FLASH program is a design demonstration of this diagnostics approach, using the very high speed computation of the Adaptive Solutions Neural Network processor to monitor an advanced Electrohydrostatic control surface actuator linked through a AS-1773A fiber optic bus. This paper describes the design approach and projected performance of this on-line diagnostics system.

  19. 75 FR 9399 - Defense Health Board (DHB) Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-02

    ... DEPARTMENT OF DEFENSE Office of the Secretary Defense Health Board (DHB) Meeting AGENCY... of the Defense Health Board (DHB), will meet on March 11, 2010. Subject to the availability of space... INFORMATION: Due to internal DoD difficulties, beyond the control of the Defense Health Board or its...

  20. 76 FR 71567 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-18

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety and Health (NIOSH) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L...

  1. 78 FR 69682 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-20

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention (CDC) Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety and Health (NIOSH) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub...

  2. 77 FR 11547 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-27

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention (CDC) Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety and Health (NIOSH) The meeting scheduled to convene on February 28-29, 2012 was published in the...

  3. 76 FR 26301 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-06

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety and Health (NIOSH) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L...

  4. Development of the quality control system of the readout electronics for the large size telescope of the Cherenkov Telescope Array observatory

    NASA Astrophysics Data System (ADS)

    Konno, Y.; Kubo, H.; Masuda, S.; Paoletti, R.; Poulios, S.; Rugliancich, A.; Saito, T.

    2016-07-01

    The Cherenkov Telescope Array (CTA) is the next generation VHE γ-ray observatory which will improve the currently available sensitivity by a factor of 10 in the range 100 GeV to 10 TeV. The array consists of different types of telescopes, called large size telescope (LST), medium size telescope (MST) and small size telescope (SST). A LST prototype is currently being built and will be installed at the Observatorio Roque de los Muchachos, island of La Palma, Canary islands, Spain. The readout system for the LST prototype has been designed and around 300 readout boards will be produced in the coming months. In this note we describe an automated quality control system able to measure basic performance parameters and quickly identify faulty boards.

  5. Space flight printed wiring board measling investigation

    NASA Technical Reports Server (NTRS)

    Thomas, Walter B., III

    1994-01-01

    A flight printed wiring board (PWB) for a satellite project was observed to have a high incidence of measling. Other PWB's produced for the program by the same manufacturer did not exhibit the degree of measling as did the 'measle-prone' board. Measling susceptibility during hand soldering and measling effects on PWB insulation resistance were investigated for three production PWB's. Measling resistance was significantly different between the three boards: the 'worst' exhibited five times the number of measles as the 'best' board. 'Severe' measling (that which is likely to affect board reliability) did not exist on the 'best' board, even under extreme soldering conditions (399 degrees C for 12-15 sec.), whereas the 'worst' board showed an average of one 'severe' measle for every two pads under more normal soldering conditions (288-343 degrees C for 2-5 sec.). Both soldering time and temperature affected measling, with time having a slightly greater influence (2 percent versus 12 percent). Measling effects on PWB insulation resistance were inconclusive. These were evaluated by in situ resistance measurements on the same three boards at elevated temperature and humidity. The measured resistance for all three boards decreased for exposures greater than 50 degrees C and 50 percent relative humidity. The 'measle-prone' board showed a resistance decrease at only 25 degrees C and 50 percent relative humidity. However, no definitive difference was detected between measled and not-measled (control) samples. The boards evaluated were production boards, so the effect of interlayer traces connecting the plated-through holes was not controlled. It is likely the resistance measurements were over different volumes of PWB laminate, which would account for the widely varying resistances measured. Thermomechanical measurements on board laminate materials did not reveal any differences attributed to measling. Differences in glass transition temperature were significantly different

  6. Space flight printed wiring board measling investigation

    NASA Astrophysics Data System (ADS)

    Thomas, Walter B., III

    1994-05-01

    A flight printed wiring board (PWB) for a satellite project was observed to have a high incidence of measling. Other PWB's produced for the program by the same manufacturer did not exhibit the degree of measling as did the 'measle-prone' board. Measling susceptibility during hand soldering and measling effects on PWB insulation resistance were investigated for three production PWB's. Measling resistance was significantly different between the three boards: the 'worst' exhibited five times the number of measles as the 'best' board. 'Severe' measling (that which is likely to affect board reliability) did not exist on the 'best' board, even under extreme soldering conditions (399 degrees C for 12-15 sec.), whereas the 'worst' board showed an average of one 'severe' measle for every two pads under more normal soldering conditions (288-343 degrees C for 2-5 sec.). Both soldering time and temperature affected measling, with time having a slightly greater influence (2 percent versus 12 percent). Measling effects on PWB insulation resistance were inconclusive. These were evaluated by in situ resistance measurements on the same three boards at elevated temperature and humidity. The measured resistance for all three boards decreased for exposures greater than 50 degrees C and 50 percent relative humidity. The 'measle-prone' board showed a resistance decrease at only 25 degrees C and 50 percent relative humidity. However, no definitive difference was detected between measled and not-measled (control) samples. The boards evaluated were production boards, so the effect of interlayer traces connecting the plated-through holes was not controlled. It is likely the resistance measurements were over different volumes of PWB laminate, which would account for the widely varying resistances measured. Thermomechanical measurements on board laminate materials did not reveal any differences attributed to measling. Differences in glass transition temperature were significantly different

  7. QUALITY CONTROL OF PHARMACEUTICALS.

    PubMed

    LEVI, L; WALKER, G C; PUGSLEY, L I

    1964-10-10

    Quality control is an essential operation of the pharmaceutical industry. Drugs must be marketed as safe and therapeutically active formulations whose performance is consistent and predictable. New and better medicinal agents are being produced at an accelerated rate. At the same time more exacting and sophisticated analytical methods are being developed for their evaluation. Requirements governing the quality control of pharmaceuticals in accordance with the Canadian Food and Drugs Act are cited and discussed.

  8. Control of vertical posture while standing on a sliding board and pushing an object.

    PubMed

    Lee, Yun-Ju; Chen, Bing; Liang, Jing-Nong; Aruin, Alexander S

    2018-03-01

    Voluntary pushing or translation perturbation of the support surface each induces a body perturbation that affects postural control. The objective of the study was to investigate anticipatory (APA) and compensatory (CPA) postural adjustments when pushing an object (that induces self-initiated perturbation) and standing on a sliding board (that induces translational perturbation). Thirteen healthy young participants were instructed to push a handle with both hands while standing on a sliding board that was either free to move in the anterior-posterior direction or stationary. Electromyographic activity (EMG) of trunk and lower extremity muscles, center of pressure (COP) displacements, and the forces exerted by the hand were recorded and analyzed during the APA and CPA phases. When the sliding board was free to move during pushing (translation perturbation), onsets of activity of ventral leg muscles and COP displacement were delayed as compared to pushing when standing on a stationary board. Moreover, magnitudes of shank muscle activity and the COP displacement were decreased. When pushing heavier weight, magnitudes of muscle activity, COP displacement, and pushing force increased. The magnitude of activity of the shank muscles during the APA and CPA phases in conditions with translational perturbation varied with the magnitude of the pushing weight. The outcome of the study suggests that the central nervous system prioritizes the pushing task while attenuates the source of additional perturbation induced by translation perturbation. These results could be used in the development of balance re-training paradigms involving pushing weight while standing on a sliding surface.

  9. 46 CFR 96.40-1 - Pilot boarding equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Pilot boarding equipment. 96.40-1 Section 96.40-1... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Pilot Boarding Equipment § 96.40-1 Pilot boarding equipment. (a) This section applies to each vessel that normally embarks or disembarks a pilot from a pilot...

  10. 46 CFR 195.40-1 - Pilot boarding equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pilot boarding equipment. 195.40-1 Section 195.40-1... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Pilot Boarding Equipment § 195.40-1 Pilot boarding equipment. (a) This section applies to each vessel that normally embarks or disembarks a pilot from a pilot...

  11. 46 CFR 96.40-1 - Pilot boarding equipment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Pilot boarding equipment. 96.40-1 Section 96.40-1... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Pilot Boarding Equipment § 96.40-1 Pilot boarding equipment. (a) This section applies to each vessel that normally embarks or disembarks a pilot from a pilot...

  12. 46 CFR 195.40-1 - Pilot boarding equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Pilot boarding equipment. 195.40-1 Section 195.40-1... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Pilot Boarding Equipment § 195.40-1 Pilot boarding equipment. (a) This section applies to each vessel that normally embarks or disembarks a pilot from a pilot...

  13. 7 CFR 58.928 - Quality control tests.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Quality control tests. 58.928 Section 58.928... Procedures § 58.928 Quality control tests. All dairy products and other ingredients shall be subject to inspection for quality and condition throughout each processing operation. Quality control tests shall be...

  14. Expert database system for quality control

    NASA Astrophysics Data System (ADS)

    Wang, Anne J.; Li, Zhi-Cheng

    1993-09-01

    There are more competitors today. Markets are not homogeneous they are fragmented into increasingly focused niches requiring greater flexibility in the product mix shorter manufacturing production runs and above allhigher quality. In this paper the author identified a real-time expert system as a way to improve plantwide quality management. The quality control expert database system (QCEDS) by integrating knowledge of experts in operations quality management and computer systems use all information relevant to quality managementfacts as well as rulesto determine if a product meets quality standards. Keywords: expert system quality control data base

  15. A Board's Eye View

    ERIC Educational Resources Information Center

    Meyer, Peter

    2004-01-01

    When Peter Meyer moved to Hudson, New York and placed his child in the local school system, he was shocked at the abysmal quality of education there. He was even more surprised to learn that there was very little movement for reform. He joined the school board with the hopes of enacting new policies, but found instead that it was an ineffecient…

  16. 7 CFR 58.335 - Quality control tests.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Quality control tests. 58.335 Section 58.335... Procedures § 58.335 Quality control tests. All milk, cream and related products are subject to inspection for quality and condition throughout each processing operation. Quality control tests shall be made on flow...

  17. Assisting people with disabilities to actively improve their collaborative physical activities with Nintendo Wii Balance Boards by controlling environmental stimulation.

    PubMed

    Shih, Ching-Hsiang; Chen, Ling-Che; Shih, Ching-Tien

    2012-01-01

    The latest researches have adopted software technology to modify the Nintendo Wii Balance Board functionality and used it to enable two people with developmental disabilities to actively perform physical activities. This study extended the latest research of the Wii Balance Board application to assess whether four people (two groups) with developmental disabilities would be able to actively improve their physical activities collaboration--walking to the designated location following simple instructions, by controlling their favorite environmental stimulation through using three Nintendo Wii Balance Boards. We employed an A-B-A-B design, with A represented the baseline and B represented intervention phases. Data showed that both groups of participants significantly increased their collaborative target response (collaboratively performing designated physical activities) by activating the control system to produce their preferred environmental stimulation during the intervention phases. Practical and developmental implications of the findings are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. 21 CFR 880.6080 - Cardiopulmonary resuscitation board.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Cardiopulmonary resuscitation board. 880.6080... Miscellaneous Devices § 880.6080 Cardiopulmonary resuscitation board. (a) Identification. A cardiopulmonary... during cardiopulmonary resuscitation. (b) Classification. Class I (general controls). The device is...

  19. 21 CFR 880.6080 - Cardiopulmonary resuscitation board.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Cardiopulmonary resuscitation board. 880.6080... Miscellaneous Devices § 880.6080 Cardiopulmonary resuscitation board. (a) Identification. A cardiopulmonary... during cardiopulmonary resuscitation. (b) Classification. Class I (general controls). The device is...

  20. 21 CFR 880.6080 - Cardiopulmonary resuscitation board.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Cardiopulmonary resuscitation board. 880.6080... Miscellaneous Devices § 880.6080 Cardiopulmonary resuscitation board. (a) Identification. A cardiopulmonary... during cardiopulmonary resuscitation. (b) Classification. Class I (general controls). The device is...

  1. 21 CFR 880.6080 - Cardiopulmonary resuscitation board.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Cardiopulmonary resuscitation board. 880.6080... Miscellaneous Devices § 880.6080 Cardiopulmonary resuscitation board. (a) Identification. A cardiopulmonary... during cardiopulmonary resuscitation. (b) Classification. Class I (general controls). The device is...

  2. 21 CFR 880.6080 - Cardiopulmonary resuscitation board.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cardiopulmonary resuscitation board. 880.6080... Miscellaneous Devices § 880.6080 Cardiopulmonary resuscitation board. (a) Identification. A cardiopulmonary... during cardiopulmonary resuscitation. (b) Classification. Class I (general controls). The device is...

  3. Where Hospital Boards Often Fail: Auditing Leadership Performance.

    PubMed

    Friedman, Susan Y; Rabkin, Mitchell T

    2018-03-06

    Hospital boards address quality of care and patient safety as well as financial performance through long-accepted practices. By contrast, a hospital's administrative operations and institutional culture are not usually subject to such detailed scrutiny. Yet, despite a healthy bottom line and patient commendations, hospital personnel can be underperforming, burdened with poor morale, and suffering from less than optimal leadership, unwarranted inefficiency, and ethically questionable management practices. The resulting employee dissatisfaction or disengagement can affect productivity, quality, turnover, innovation, patient and donor attraction and retention, public image, etc., and can be missed by an unsuspecting board. While boards do not scrutinize most administrative operations, they do examine financial performance, through review of the independent auditor's Management Letter. Designed to help the chief financial officer (CFO) improve the efficiency and integrity of the hospital's financial systems and to recommend improvements to the board for implementation (rather than to assess the CFO's performance), the Management Letter has no equal with respect to a comparable evaluation of the hospital's administrative performance and workplace culture. When, as is often the case, there is only superficial review of the chief executive officer, the board has no source of analysis or recommendations to improve the hospital's institutional environment. In this Invited Commentary, the authors suggest a methodology to provide such a review, leading to a Leadership Letter, and discuss its utility for both non-profit and for-profit organizations.

  4. Comparison of MODIS and VIIRS On-board Blackbody Performance

    NASA Technical Reports Server (NTRS)

    Xiong, Jack; Butler, Jim; Wu, Aisheng; Chiang, Vincent; McIntire, Jeff; Oudari, Hassan

    2012-01-01

    MODIS has 16 thermal emissive bands (TEBs), covering wavelengths from 3.7 to 14.4 microns. MODIS TEBs are calibrated on-orbit by a v-grooved blackbody (BB) on a scan-by-scan basis. The BB temperatures are measured by a set of 12 thennistors. As expected, the BB temperature uncertainty and stability have direct impact on the quality of TEB calibration and, therefore, the quality of the science products derived from TEB observations. Since launch, Terra and Aqua MODIS have successfully operated for more than 12 and 10 years, respectively. Their on-board BB performance has been satisfactory in meeting the TEB calibration requirements. The first VIIRS, launched on-board the Suomi NPP spacecraft on October 28, 2011, has successfully completed its initial Intensive Calibration and Validation (ICV) phase. VIIRS has 7 thermal emissive bands (TEBs), covering wavelengths from 3.7 to 12.4 microns. Designed with strong MODIS heritage, VIIRS uses a similar BB for its TEB calibration. Like MODIS, VIIRS BB is nominally controlled at a pre-determined temperature (set point). Periodically, a BB Warm-Up and Cool-Down (WUCD) operation is performed, during which the BB temperatures vary from instrument ambient (temperature) to 315K. This paper examines NPP VIIRS BB on-orbit performance. It focuses on its BB temperature scan-to-scan variations at nominally controlled temperature as well as during its WUCD operation and their impact on TEB calibration uncertainty. Comparisons of VIIRS (NPP) and MODIS (Terra and Aqua) BB on-orbit performance and lessons learned for future improvements are also presented in this paper.

  5. Quality Control of Pharmaceuticals

    PubMed Central

    Levi, Leo; Walker, George C.; Pugsley, L. I.

    1964-01-01

    Quality control is an essential operation of the pharmaceutical industry. Drugs must be marketed as safe and therapeutically active formulations whose performance is consistent and predictable. New and better medicinal agents are being produced at an accelerated rate. At the same time more exacting and sophisticated analytical methods are being developed for their evaluation. Requirements governing the quality control of pharmaceuticals in accordance with the Canadian Food and Drugs Act are cited and discussed. PMID:14199105

  6. The use of patient feedback by hospital boards of directors: a qualitative study of two NHS hospitals in England

    PubMed Central

    Lee, Robert; Baeza, Juan I; Fulop, Naomi J

    2018-01-01

    Background Although previous research suggests that different kinds of patient feedback are used in different ways to help improve the quality of hospital care, there have been no studies of the ways in which hospital boards of directors use feedback for this purpose. Objectives To examine whether and how boards of directors of hospitals use feedback from patients to formulate strategy and to assure and improve the quality of care. Methods We undertook an in-depth qualitative study in two acute hospital National Health Service foundation trusts in England, purposively selected as contrasting examples of the collection of different kinds of patient feedback. We collected and analysed data from interviews with directors and other managers, from observation of board meetings, and from board papers and other documents. Results The two boards used in-depth qualitative feedback and quantitative feedback from surveys in different ways to help develop strategies, set targets for quality improvement and design specific quality improvement initiatives; but both boards made less subsequent use of any kinds of feedback to monitor their strategies or explicitly to assure the quality of services. Discussion and conclusions We have identified limitations in the uses of patient feedback by hospital boards that suggest that boards should review their current practice to ensure that they use the different kinds of patient feedback that are available to them more effectively to improve, monitor and assure the quality of care. PMID:28754814

  7. Teacher Quality: A Comparison of National Board--Certified and Non--Board--Certified Teachers of Deaf Students

    ERIC Educational Resources Information Center

    Scheetz, Nanci A.; Martin, David S.

    2006-01-01

    The study was designed to identify specific components of teacher excellence, focusing initially on the characteristics of the small number of teachers of the deaf who are certified by the National Board for Professional Teaching Standards (NBPTS), then comparing those with the characteristics of other teachers identified as master teachers by…

  8. 30 CFR 28.31 - Quality control plans; contents.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Quality control plans; contents. 28.31 Section... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.31 Quality control plans; contents. (a) Each quality control plan shall contain provisions for the management of quality, including: (1...

  9. [Highly quality-controlled radiation therapy].

    PubMed

    Shirato, Hiroki

    2005-04-01

    Advanced radiation therapy for intracranial disease has focused on set-up accuracy for the past 15 years. However, quality control in the prescribed dose is actually as important as the tumor set-up in radiation therapy. Because of the complexity of the three-dimensional radiation treatment planning system in recent years, the highly quality-controlled prescription of the dose has now been reappraised as the mainstream to improve the treatment outcome of radiation therapy for intracranial disease. The Japanese Committee for Quality Control of Radiation Therapy has developed fundamental requirements such as a QC committee in each hospital, a medical physicist, dosimetrists (QC members), and an external audit.

  10. Control by quality: proposition of a typology.

    PubMed

    Pujo, P; Pillet, M

    The application of Quality tools and methods in industrial management has always had a fundamental impact on the control of production. It influences the behavior of the actors concerned, while introducing the necessary notions and formalizations, especially for production systems with little or no automation, which constitute a large part of the industrial activity. Several quality approaches are applied in the workshop and are implemented at the level of the control. In this paper, the authors present a typology of the various approaches that have successively influenced control, such as statistical process control, quality assurance, and continuous improvement. First the authors present a parallel between production control and quality organizational structure. They note the duality between control, which is aimed at increasing productivity, and quality, which aims to satisfy the needs of the customer. They also note the hierarchical organizational structure of these two systems of management with, at each level, the notion of a feedback loop. This notion is fundamental to any kind of decision making. The paper is organized around the operational, tactical, and strategic levels, by describing for each level the main methods and tools for control by quality. The overview of these tools and methods starts at the operational level, with the Statistical Process Control, the Taguchi technique, and the "six sigma" approach. On the tactical level, we find a quality system approach, with a documented description of the procedures introduced in the firm. The management system can refer here to Quality Assurance, Total Productive Maintenance, or Management by Total Quality. The formalization through procedures of the rules of decision governing the process control enhances the validity of these rules. This leads to the enhancement of their reliability and to their consolidation. All this counterbalances the human, intrinsically fluctuating, behavior of the control

  11. Directing Discipline: State Medical Board Responsiveness to State Legislatures.

    PubMed

    Lillvis, Denise F; McGrath, Robert J

    2017-02-01

    State medical boards are increasingly responsible for regulating medical and osteopathic licensure and professional conduct in the United States. Yet, there is great variation in the extent to which such boards take disciplinary action against physicians, indicating that some boards are more zealous regulators than others. We look to the political roots of such variation and seek to answer a simple, yet important, question: are nominally apolitical state medical boards responsive to political preferences? To address this question, we use panel data on disciplinary actions across sixty-four state medical boards from 1993 through 2006 and control for over-time changes in board characteristics (e.g., composition, independence, budgetary status), regulatory structure, and resources. We show that as state legislatures become more liberal [conservative], state boards increasingly [decreasingly] discipline physicians, especially during unified government and in the presence of highly professional legislatures. Our conclusions join others in emphasizing the importance of state medical boards and the contingent nature of political control of state regulation. In addition, we emphasize the roles that oversight capacity and strategy play in offsetting concerns regarding self-regulation of a powerful organized interest. Copyright © 2017 by Duke University Press.

  12. Battery Control Boards for Li-Ion Batteries on Mars Exploration Rovers

    NASA Technical Reports Server (NTRS)

    Ewell, R.; Ratnakumar, B. V.; Smart, M.; Chin, K. B.; Whitcanack, L.; Narayanan, S. R.; Surampudi, S.

    2006-01-01

    Rechargeable Lithium-ion batteries have been operating successfully on both Spirit and Opportunity rovers for the last two years, which includes six months of Assembly Launch and Test Operations (ATLO), seven months of cruise and about eleven months of surface operations. The Battery Control Boards designed and fabricated in-house would protect cells against overcharge and over-discharge and provide cell balance. Their performance has thus far been quite satisfactory. The ground data o the mission simulation battery project little capacity loss of less than 3% during cruise and 180 sols. Batteries are poised to extend the mission beyond six months, if not a couple of years.

  13. Quantitative evaluation of low-cost frame-grabber boards for personal computers.

    PubMed

    Kofler, J M; Gray, J E; Fuelberth, J T; Taubel, J P

    1995-11-01

    Nine moderately priced frame-grabber boards for both Macintosh (Apple Computers, Cupertino, CA) and IBM-compatible computers were evaluated using a Society of Motion Pictures and Television Engineers (SMPTE) pattern and a video signal generator for dynamic range, gray-scale reproducibility, and spatial integrity of the captured image. The degradation of the video information ranged from minor to severe. Some boards are of reasonable quality for applications in diagnostic imaging and education. However, price and quality are not necessarily directly related.

  14. 30 CFR 74.6 - Quality control.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Quality control. 74.6 Section 74.6 Mineral... of the CMDPSU will be maintained in production through adequate quality control procedures, MSHA and... DUST SAMPLING DEVICES Approval Requirements for Coal Mine Dust Personal Sampler Unit § 74.6 Quality...

  15. Getting To Know You. A Guide for Boarding Home Parents.

    ERIC Educational Resources Information Center

    Kleinfeld, Judith; Christian, Jennifer

    Successful boarding home parents seem to have two qualities in common: they express their affection for their student openly and often, and they respect their student's desire to be treated as a mature person. Many cultural differences exist between the Indian and Eskimo students, coming from villages without high schools, and the boarding home…

  16. 76 FR 28438 - Board of Scientific Counselors (BSC), National Center for Injury Prevention and Control (NCIPC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-17

    ... below concerns RFA CE10-004, the National Academic Centers of Excellence in Youth Violence Prevention... Violence Prevention (U01). Contact Person for More Information: Gwendolyn Haile Cattledge, PhD, M.S.E.H., F... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of...

  17. High density, multi-range analog output Versa Module Europa board for control system applications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Singh, Kundan, E-mail: kundan@iuac.res.in; Das, Ajit Lal

    2014-01-15

    A new VMEDAC64, 12-bit 64 channel digital-to-analog converter, a Versa Module Europa (VME) module, features 64 analog voltage outputs with user selectable multiple ranges, has been developed for control system applications at Inter University Accelerator Centre. The FPGA (Field Programmable Gate Array) is the module's core, i.e., it implements the DAC control logic and complexity of VMEbus slave interface logic. The VMEbus slave interface and DAC control logic are completely designed and implemented on a single FPGA chip to achieve high density of 64 channels in a single width VME module and will reduce the module count in the controlmore » system applications, and hence will reduce the power consumption and cost of overall system. One of our early design goals was to develop the VME interface such that it can be easily integrated with the peripheral devices and satisfy the timing specifications of VME standard. The modular design of this module reduces the amount of time required to develop other custom modules for control system. The VME slave interface is written as a single component inside FPGA which will be used as a basic building block for any VMEbus interface project. The module offers multiple output voltage ranges depending upon the requirement. The output voltage range can be reduced or expanded by writing range selection bits in the control register. The module has programmable refresh rate and by default hold capacitors in the sample and hold circuit for each channel are charged periodically every 7.040 ms (i.e., update frequency 284 Hz). Each channel has software controlled output switch which disconnects analog output from the field. The modularity in the firmware design on FPGA makes the debugging very easy. On-board DC/DC converters are incorporated for isolated power supply for the analog section of the board.« less

  18. Governance and Higher Education in Pakistan: What Roles Do Boards of Governors Play in Ensuring the Academic Quality Maintenance in Public Universities versus Private Universities in Pakistan?

    ERIC Educational Resources Information Center

    Usman, Sidra

    2014-01-01

    There are major structural issues in the higher education system in Pakistan leading to poor governance of institutions and questionable quality of education. This paper looks at the differences in the role of boards of governors in maintaining quality of education in both the public and the private sector universities in Pakistan. After having…

  19. Sampling and Control Circuit Board for an Inertial Measurement Unit

    NASA Technical Reports Server (NTRS)

    Chelmins, David; Powis, Rick

    2012-01-01

    Spacesuit navigation is one component of NASA s efforts to return humans to the Moon. Studies performed at the NASA Glenn Research Center (GRC) considered various navigation technologies and filtering approaches to enable navigation on the lunar surface. As part of this effort, microelectromechanical systems (MEMS) inertial measurement units (IMUs) were studied to determine if they could supplement a radiometric infrastructure. MEMS IMUs were included in the Lunar Extra-Vehicular Activity Crewmember Location Determination System (LECLDS) testbed during NASA s annual Desert Research and Technology Studies (D-RATS) event in 2009 and 2010. The testbed included one IMU in 2009 and three IMUs in 2010, along with a custom circuit board interfacing between the navigation processor and each IMU. The board was revised for the 2010 test, and this paper documents the design details of this latest revision of the interface circuit board and firmware.

  20. [Quality control in herbal supplements].

    PubMed

    Oelker, Luisa

    2005-01-01

    Quality and safety of food and herbal supplements are the result of a whole of different elements as good manufacturing practice and process control. The process control must be active and able to individuate and correct all possible hazards. The main and most utilized instrument is the hazard analysis critical control point (HACCP) system the correct application of which can guarantee the safety of the product. Herbal supplements need, in addition to standard quality control, a set of checks to assure the harmlessness and safety of the plants used.

  1. The SAX Italian scientific satellite. The on-board implemented automation as a support to the ground control capability

    NASA Technical Reports Server (NTRS)

    Martelli, Andrea

    1994-01-01

    This paper presents the capabilities implemented in the SAX system for an efficient operations management during its in-flight mission. SAX is an Italian scientific satellite for x-ray astronomy whose major mission objectives impose quite tight constraints on the implementation of both the space and ground segment. The most relevant mission characteristics require an operative lifetime of two years, performing scientific observations both in contact and in noncontact periods, with a low equatorial orbit supported by one ground station, so that only a few minutes of communications are available each orbit. This operational scenario determines the need to have a satellite capable of performing the scheduled mission automatically and reacting autonomously to contingency situations. The implementation approach of the on-board operations management, through which the necessary automation and autonomy are achieved, follows a hierarchical structure. This has been achieved adopting a distributed avionic architecture. Nine different on-board computers, in fact, constitute the on-board data management system. Each of them performs the local control and monitors its own functions while the system level control is performed at a higher level by the data handling applications software. The SAX on-board architecture provides the ground operators with different options of intervention by three classes of telecommands. The management of the scientific operations will be scheduled by the operation control center via dedicated operating plans. The SAX satellite flight mode is presently being integrated at Alenia Spazio premises in Turin for a launch scheduled for the end of 1995. Once in orbit, the SAX satellite will be subject to intensive check-out activities in order to verify the required mission performances. An overview of the envisaged procedure and of the necessary on-ground activities is therefore depicted as well.

  2. Distributed sensor architecture for intelligent control that supports quality of control and quality of service.

    PubMed

    Poza-Lujan, Jose-Luis; Posadas-Yagüe, Juan-Luis; Simó-Ten, José-Enrique; Simarro, Raúl; Benet, Ginés

    2015-02-25

    This paper is part of a study of intelligent architectures for distributed control and communications systems. The study focuses on optimizing control systems by evaluating the performance of middleware through quality of service (QoS) parameters and the optimization of control using Quality of Control (QoC) parameters. The main aim of this work is to study, design, develop, and evaluate a distributed control architecture based on the Data-Distribution Service for Real-Time Systems (DDS) communication standard as proposed by the Object Management Group (OMG). As a result of the study, an architecture called Frame-Sensor-Adapter to Control (FSACtrl) has been developed. FSACtrl provides a model to implement an intelligent distributed Event-Based Control (EBC) system with support to measure QoS and QoC parameters. The novelty consists of using, simultaneously, the measured QoS and QoC parameters to make decisions about the control action with a new method called Event Based Quality Integral Cycle. To validate the architecture, the first five Braitenberg vehicles have been implemented using the FSACtrl architecture. The experimental outcomes, demonstrate the convenience of using jointly QoS and QoC parameters in distributed control systems.

  3. Distributed Sensor Architecture for Intelligent Control that Supports Quality of Control and Quality of Service

    PubMed Central

    Poza-Lujan, Jose-Luis; Posadas-Yagüe, Juan-Luis; Simó-Ten, José-Enrique; Simarro, Raúl; Benet, Ginés

    2015-01-01

    This paper is part of a study of intelligent architectures for distributed control and communications systems. The study focuses on optimizing control systems by evaluating the performance of middleware through quality of service (QoS) parameters and the optimization of control using Quality of Control (QoC) parameters. The main aim of this work is to study, design, develop, and evaluate a distributed control architecture based on the Data-Distribution Service for Real-Time Systems (DDS) communication standard as proposed by the Object Management Group (OMG). As a result of the study, an architecture called Frame-Sensor-Adapter to Control (FSACtrl) has been developed. FSACtrl provides a model to implement an intelligent distributed Event-Based Control (EBC) system with support to measure QoS and QoC parameters. The novelty consists of using, simultaneously, the measured QoS and QoC parameters to make decisions about the control action with a new method called Event Based Quality Integral Cycle. To validate the architecture, the first five Braitenberg vehicles have been implemented using the FSACtrl architecture. The experimental outcomes, demonstrate the convenience of using jointly QoS and QoC parameters in distributed control systems. PMID:25723145

  4. Quality control education in the community college

    NASA Technical Reports Server (NTRS)

    Greene, J. Griffen; Wilson, Steve

    1966-01-01

    This paper describes the Quality Control Program at Daytona Beach Junior College, including course descriptions. The program in quality control required communication between the college and the American Society for Quality Control (ASQC). The college has machinery established for certification of the learning process, and the society has the source of teachers who are competent in the technical field and who are the employers of the educational products. The associate degree for quality control does not have a fixed program, which can serve all needs, any more than all engineering degrees have identical programs. The main ideas which would be common to all quality control programs are the concept of economic control of a repetitive process and the concept of developing individual potentialities into individuals who are needed and productive.

  5. Contract Quality Assurance and Pricing Practices for Patriot Missile Procurements

    DTIC Science & Technology

    1995-06-26

    The audit objectives were to evaluate DoD and Raytheon quality assurance and pricing practices for Patriot missile circuit boards. We also evaluated the management control program as it applied to the audit objectives.

  6. Splitter board for steamer tube readout at the SLD

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bacchetta, N.; Bisello, D.; Castro, A.

    1989-10-01

    This paper presents a controller board designed as a part of the data acquisition system for the readout of limited streamer tube strips in the warm iron calorimeter for the SLD detector. The board controls the data readout and allows for remote setting and diagnostic of the system.

  7. The use of patient feedback by hospital boards of directors: a qualitative study of two NHS hospitals in England.

    PubMed

    Lee, Robert; Baeza, Juan I; Fulop, Naomi J

    2018-02-01

    Although previous research suggests that different kinds of patient feedback are used in different ways to help improve the quality of hospital care, there have been no studies of the ways in which hospital boards of directors use feedback for this purpose. To examine whether and how boards of directors of hospitals use feedback from patients to formulate strategy and to assure and improve the quality of care. We undertook an in-depth qualitative study in two acute hospital National Health Service foundation trusts in England, purposively selected as contrasting examples of the collection of different kinds of patient feedback. We collected and analysed data from interviews with directors and other managers, from observation of board meetings, and from board papers and other documents. The two boards used in-depth qualitative feedback and quantitative feedback from surveys in different ways to help develop strategies, set targets for quality improvement and design specific quality improvement initiatives; but both boards made less subsequent use of any kinds of feedback to monitor their strategies or explicitly to assure the quality of services. We have identified limitations in the uses of patient feedback by hospital boards that suggest that boards should review their current practice to ensure that they use the different kinds of patient feedback that are available to them more effectively to improve, monitor and assure the quality of care. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  8. 23 CFR 1340.8 - Quality control.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... OBSERVATIONAL SURVEYS OF SEAT BELT USE Survey Design Requirements § 1340.8 Quality control. (a) Quality control... control monitors involved in seat belt use surveys shall have received training in data collection...) Statistical review. Survey results shall be reviewed and approved by a survey statistician, i.e., a person...

  9. 23 CFR 1340.8 - Quality control.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... OBSERVATIONAL SURVEYS OF SEAT BELT USE Survey Design Requirements § 1340.8 Quality control. (a) Quality control... control monitors involved in seat belt use surveys shall have received training in data collection...) Statistical review. Survey results shall be reviewed and approved by a survey statistician, i.e., a person...

  10. 23 CFR 1340.8 - Quality control.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... OBSERVATIONAL SURVEYS OF SEAT BELT USE Survey Design Requirements § 1340.8 Quality control. (a) Quality control... control monitors involved in seat belt use surveys shall have received training in data collection...) Statistical review. Survey results shall be reviewed and approved by a survey statistician, i.e., a person...

  11. Experimental test of airplane boarding methods

    DOE PAGES

    Steffen, Jason H.; Hotchkiss, Jon

    2011-10-26

    We report the results of an experimental comparison of different airplane boarding methods. This test was conducted in a mock 757 fuselage, located on a Southern California soundstage, with 12 rows of six seats and a single aisle. Five methods were tested using 72 passengers of various ages. We found a significant reduction in the boarding times of optimized methods over traditional methods. These improved methods, if properly implemented, could result in a significant savings to airline companies. The process of boarding an airplane is of interest to a variety of groups. The public is interested both as a curiosity,more » as it is something that they may regularly experience, and as a consumer, as their experiences good or bad can affect their loyalties. Airline companies and their employees also have a stake in an efficient boarding procedure as time saved in the boarding process may result is monetary savings, in the quality of interactions with passengers, and in the application of human resources to the general process of preparing an airplane for departure. A recent study (Nyquist and McFadden, 2008) indicates that the average cost to an airline company for each minute of time spent at the terminal is roughly $30. Thus, each minute saved in the turn-around time of a flight has the potential to generate over $16,000,000 in annual savings (assuming an average of 1500 flights per day). While the boarding process may not be the primary source of delay in returning an airplane to the skies, reducing the boarding time may effectively eliminate passenger boarding as a contributor in any meaningful measure. Consequently, subsequent efforts to streamline the other necessary tasks, such as refueling and maintenance, would be rewarded with a material reduction in time at the gate for each flight.« less

  12. 42 CFR 84.41 - Quality control plans; contents.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Quality control plans; contents. 84.41 Section 84... AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Quality Control § 84.41 Quality control plans; contents. (a) Each quality control plan shall contain provisions for the...

  13. 42 CFR 84.41 - Quality control plans; contents.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Quality control plans; contents. 84.41 Section 84... AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Quality Control § 84.41 Quality control plans; contents. (a) Each quality control plan shall contain provisions for the...

  14. 42 CFR 84.41 - Quality control plans; contents.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Quality control plans; contents. 84.41 Section 84... AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Quality Control § 84.41 Quality control plans; contents. (a) Each quality control plan shall contain provisions for the...

  15. 42 CFR 84.41 - Quality control plans; contents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Quality control plans; contents. 84.41 Section 84... AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Quality Control § 84.41 Quality control plans; contents. (a) Each quality control plan shall contain provisions for the...

  16. 42 CFR 84.41 - Quality control plans; contents.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Quality control plans; contents. 84.41 Section 84... AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Quality Control § 84.41 Quality control plans; contents. (a) Each quality control plan shall contain provisions for the...

  17. Instrument Quality Control.

    PubMed

    Jayakody, Chatura; Hull-Ryde, Emily A

    2016-01-01

    Well-defined quality control (QC) processes are used to determine whether a certain procedure or action conforms to a widely accepted standard and/or set of guidelines, and are important components of any laboratory quality assurance program (Popa-Burke et al., J Biomol Screen 14: 1017-1030, 2009). In this chapter, we describe QC procedures useful for monitoring the accuracy and precision of laboratory instrumentation, most notably automated liquid dispensers. Two techniques, gravimetric QC and photometric QC, are highlighted in this chapter. When used together, these simple techniques provide a robust process for evaluating liquid handler accuracy and precision, and critically underpin high-quality research programs.

  18. 14 CFR 145.211 - Quality control system.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Quality control system. 145.211 Section 145...) SCHOOLS AND OTHER CERTIFICATED AGENCIES REPAIR STATIONS Operating Rules § 145.211 Quality control system. (a) A certificated repair station must establish and maintain a quality control system acceptable to...

  19. 18 CFR 12.40 - Quality control programs.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Quality control... PROJECT WORKS Other Responsibilities of Applicant or Licensee § 12.40 Quality control programs. (a... meeting any requirements or standards set by the Regional Engineer. If a quality control program is...

  20. 18 CFR 12.40 - Quality control programs.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Quality control... PROJECT WORKS Other Responsibilities of Applicant or Licensee § 12.40 Quality control programs. (a... meeting any requirements or standards set by the Regional Engineer. If a quality control program is...

  1. 14 CFR 145.211 - Quality control system.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Quality control system. 145.211 Section 145...) SCHOOLS AND OTHER CERTIFICATED AGENCIES REPAIR STATIONS Operating Rules § 145.211 Quality control system. (a) A certificated repair station must establish and maintain a quality control system acceptable to...

  2. Quality Control in construction.

    DTIC Science & Technology

    1984-01-01

    behavioral scientists. In 1962, Dr. Kaoru Ishikawa gave shape to the form of training which featured intradepartmental groups of ten or so workers seated...and Japanese circles bears closer scrutiny. 4.3.1 Japanese Ingredients of Quality The founder of quality circles, Dr. Kaoru Ishikawa , gives six...around 51 a table; hence the name Quality Control Circle. 4 Dr. 0 Ishikawa was an engineering professor at Tokyo University, and the circles were

  3. 30 CFR 74.6 - Quality control.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Quality control. 74.6 Section 74.6 Mineral... control. The applicant shall describe the way in which each lot of components will be sampled and tested... of the CMDPSU will be maintained in production through adequate quality control procedures, MSHA and...

  4. 30 CFR 74.6 - Quality control.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Quality control. 74.6 Section 74.6 Mineral... control. The applicant shall describe the way in which each lot of components will be sampled and tested... of the CMDPSU will be maintained in production through adequate quality control procedures, MSHA and...

  5. 30 CFR 74.6 - Quality control.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Quality control. 74.6 Section 74.6 Mineral... control. The applicant shall describe the way in which each lot of components will be sampled and tested... of the CMDPSU will be maintained in production through adequate quality control procedures, MSHA and...

  6. Quality Assurance and Quality Control, Part 2.

    PubMed

    Akers, Michael J

    2015-01-01

    The tragedy surrounding the New England Compounding Center and contaminated steroid syringe preparations clearly points out what can happen if quality-assurance and quality-control procedures are not strictly practiced in the compounding of sterile preparations. This article is part 2 of a two-part article on requirements to comply with United States Pharmacopeia general chapters <797> and <1163> with respect to quality assurance of compounded sterile preparations. Part 1 covered documentation requirements, inspection procedures, compounding accuracy checks, and part of a discussion on bacterial endotoxin testing. Part 2 covers sterility testing, the completion from part 1 on bacterial endotoxin testing, a brief dicussion of United States Pharmacopeia <1163>, and advances in pharmaceutical quality systems.

  7. Politics of Decision Making in Relation to Education in Comparative Perspective, Unity and Diversity as a Problem. Centralization and Decentralization in Decision Making: The Lay Board of Control.

    ERIC Educational Resources Information Center

    Pfnister, Allan O.

    The evolution and role of the lay board of control (trustees, directors) of higher educational institutions and the part the board has played or may play in maintaining diversity in the American system are examined. The evolution of the lay board in the United States and in the United Kingdom is described. The lay board has become "the…

  8. Guidance for Efficient Small Animal Imaging Quality Control.

    PubMed

    Osborne, Dustin R; Kuntner, Claudia; Berr, Stuart; Stout, David

    2017-08-01

    Routine quality control is a critical aspect of properly maintaining high-performance small animal imaging instrumentation. A robust quality control program helps produce more reliable data both for academic purposes and as proof of system performance for contract imaging work. For preclinical imaging laboratories, the combination of costs and available resources often limits their ability to produce efficient and effective quality control programs. This work presents a series of simplified quality control procedures that are accessible to a wide range of preclinical imaging laboratories. Our intent is to provide minimum guidelines for routine quality control that can assist preclinical imaging specialists in setting up an appropriate quality control program for their facility.

  9. 42 CFR 84.256 - Quality control requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Quality control requirements. 84.256 Section 84.256... § 84.256 Quality control requirements. (a) In addition to the construction and performance requirements specified in §§ 84.251, 84.252, 84.253, 84.254, and 84.255, the quality control requirements in paragraphs...

  10. 42 CFR 84.256 - Quality control requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Quality control requirements. 84.256 Section 84.256... § 84.256 Quality control requirements. (a) In addition to the construction and performance requirements specified in §§ 84.251, 84.252, 84.253, 84.254, and 84.255, the quality control requirements in paragraphs...

  11. 42 CFR 84.256 - Quality control requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Quality control requirements. 84.256 Section 84.256... § 84.256 Quality control requirements. (a) In addition to the construction and performance requirements specified in §§ 84.251, 84.252, 84.253, 84.254, and 84.255, the quality control requirements in paragraphs...

  12. 42 CFR 84.256 - Quality control requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Quality control requirements. 84.256 Section 84.256... § 84.256 Quality control requirements. (a) In addition to the construction and performance requirements specified in §§ 84.251, 84.252, 84.253, 84.254, and 84.255, the quality control requirements in paragraphs...

  13. 42 CFR 84.256 - Quality control requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Quality control requirements. 84.256 Section 84.256... § 84.256 Quality control requirements. (a) In addition to the construction and performance requirements specified in §§ 84.251, 84.252, 84.253, 84.254, and 84.255, the quality control requirements in paragraphs...

  14. How to Sustain Change and Support Continuous Quality Improvement

    PubMed Central

    McQuillan, Rory; Harel, Ziv; Weizman, Adam V.; Thomas, Alison; Nesrallah, Gihad; Bell, Chaim M.; Chan, Christopher T.; Chertow, Glenn M.

    2016-01-01

    To achieve sustainable change, quality improvement initiatives must become the new way of working rather than something added on to routine clinical care. However, most organizational change is not maintained. In this next article in this Moving Points in Nephrology feature on quality improvement, we provide health care professionals with strategies to sustain and support quality improvement. Threats to sustainability may be identified both at the beginning of a project and when it is ready for implementation. The National Health Service Sustainability Model is reviewed as one example to help identify issues that affect long-term success of quality improvement projects. Tools to help sustain improvement include process control boards, performance boards, standard work, and improvement huddles. Process control and performance boards are methods to communicate improvement results to staff and leadership. Standard work is a written or visual outline of current best practices for a task and provides a framework to ensure that changes that have improved patient care are consistently and reliably applied to every patient encounter. Improvement huddles are short, regular meetings among staff to anticipate problems, review performance, and support a culture of improvement. Many of these tools rely on principles of visual management, which are systems transparent and simple so that every staff member can rapidly distinguish normal from abnormal working conditions. Even when quality improvement methods are properly applied, the success of a project still depends on contextual factors. Context refers to aspects of the local setting in which the project operates. Context affects resources, leadership support, data infrastructure, team motivation, and team performance. For these reasons, the same project may thrive in a supportive context and fail in a different context. To demonstrate the practical applications of these quality improvement principles, these principles are

  15. On-Board Real-Time Optimization Control for Turbo-Fan Engine Life Extending

    NASA Astrophysics Data System (ADS)

    Zheng, Qiangang; Zhang, Haibo; Miao, Lizhen; Sun, Fengyong

    2017-11-01

    A real-time optimization control method is proposed to extend turbo-fan engine service life. This real-time optimization control is based on an on-board engine mode, which is devised by a MRR-LSSVR (multi-input multi-output recursive reduced least squares support vector regression method). To solve the optimization problem, a FSQP (feasible sequential quadratic programming) algorithm is utilized. The thermal mechanical fatigue is taken into account during the optimization process. Furthermore, to describe the engine life decaying, a thermal mechanical fatigue model of engine acceleration process is established. The optimization objective function not only contains the sub-item which can get fast response of the engine, but also concludes the sub-item of the total mechanical strain range which has positive relationship to engine fatigue life. Finally, the simulations of the conventional optimization control which just consider engine acceleration performance or the proposed optimization method have been conducted. The simulations demonstrate that the time of the two control methods from idle to 99.5 % of the maximum power are equal. However, the engine life using the proposed optimization method could be surprisingly increased by 36.17 % compared with that using conventional optimization control.

  16. Internal medicine board certification and career pathways in Japan.

    PubMed

    Koike, Soichi; Matsumoto, Masatoshi; Ide, Hiroo; Kawaguchi, Hideaki; Shimpo, Masahisa; Yasunaga, Hideo

    2017-05-08

    Establishing and managing a board certification system is a common concern for many countries. In Japan, the board certification system is under revision. The purpose of this study was to describe present status of internal medicine specialist board certification, to identify factors associated with maintenance of board certification and to investigate changes in area of practice when physicians move from hospital to clinic practice. We analyzed 2010 and 2012 data from the Survey of Physicians, Dentists and Pharmacists. We conducted logistic regression analysis to identify factors associated with the maintenance of board certification between 2010 and 2012. We also analyzed data on career transition from hospitals to clinics for hospital physicians with board certification. It was common for physicians seeking board certification to do so in their early career. The odds of maintaining board certification were lower in women and those working in locations other than academic hospitals, and higher in physicians with subspecialty practice areas. Among hospital physicians with board certification who moved to clinics between 2010 and 2012, 95.8% remained in internal medicine or its subspecialty areas and 87.7% maintained board certification but changed their practice from a subspecialty area to more general internal medicine. Revisions of the internal medicine board certification system must consider different physician career pathways including mid-career moves while maintaining certification quality. This will help to secure an adequate number and distribution of specialists. To meet the increasing demand for generalist physicians, it is important to design programs to train specialists in general practice.

  17. Physician Board Certification and the Care and Outcomes of Elderly Patients with Acute Myocardial Infarction

    PubMed Central

    Chen, Jersey; Rathore, Saif S; Wang, Yongfei; Radford, Martha J; Krumholz, Harlan M

    2006-01-01

    BACKGROUND Patients and purchasers prefer board-certified physicians, but whether these physicians provide better quality of care and outcomes for hospitalized patients is unclear. OBJECTIVE We evaluated whether care by board-certified physicians after acute myocardial infarction (AMI) was associated with higher use of clinical guideline recommended therapies and lower 30-day mortality. SUBJECTS AND METHODS We examined 101,251 Medicare patients hospitalized for AMI in the United States and compared use of aspirin, β-blockers, and 30-day mortality according to the attending physicians' board certification in family practice, internal medicine, or cardiology. RESULTS Board-certified family practitioners had slightly higher use of aspirin (admission: 51.1% vs 46.0%; discharge: 72.2% vs 63.9%) and β-blockers (admission: 44.1% vs 37.1%; discharge: 46.2% vs 38.7%) than nonboard-certified family practitioners. There was a similar pattern in board-certified Internists for aspirin (admission: 53.7% vs 49.6%; discharge: 78.2% vs 68.8%) and β-blockers (admission: 48.9% vs 44.1%; discharge: 51.2% vs 47.1). Board-certified cardiologists had higher use of aspirin compared with cardiologists certified in internal medicine only or without any board certification (admission: 61.3% vs 53.1% vs 52.1%; discharge: 82.2% vs 71.8% vs 71.5%) and β-blockers (admission: 52.9% vs 49.6% vs 41.5%; discharge: 54.7% vs 50.6% vs 42.5%). In multivariate regression analyses, board certification was not associated with differences in 30-day mortality. CONCLUSIONS Treatment by a board-certified physician was associated with modestly higher quality of care for AMI, but not differences in mortality. Regardless of board certification, all physicians had opportunities to improve quality of care for AMI. PMID:16637823

  18. 32 CFR 724.404 - Director, Naval Council of Personnel Boards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Director, Naval Council of Personnel Boards. 724... PERSONNEL NAVAL DISCHARGE REVIEW BOARD Principal Elements of the Navy Department Discharge Review System § 724.404 Director, Naval Council of Personnel Boards. Exercises adminstrative control and oversight of...

  19. 32 CFR 724.404 - Director, Naval Council of Personnel Boards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 5 2011-07-01 2011-07-01 false Director, Naval Council of Personnel Boards. 724... PERSONNEL NAVAL DISCHARGE REVIEW BOARD Principal Elements of the Navy Department Discharge Review System § 724.404 Director, Naval Council of Personnel Boards. Exercises adminstrative control and oversight of...

  20. Quality of randomized controlled trials published in the International Urogynecology Journal 2007-2016.

    PubMed

    Kim, Kyu Shik; Chung, Jae Hoon; Jo, Jung Ki; Kim, Jae Heon; Kim, Seungjun; Cho, Jeoung Man; Cho, Hee Ju; Choi, Hong Yong; Lee, Seung Wook

    2018-07-01

    Randomized controlled trials (RCTs) provide the best quality clinical evidence. The aim of this study was to assess the quality of RCTs published by the International Urogynecology Journal (IUJ) in 2007-2016. RCTs in original articles were extracted from PubMed and IUJ homepage. Change in RCT quality over time was assessed with Jadad and van Tulder scales and Cochrane Collaboration's risk of bias tool (CCRBT). Jadad scores of 3-5 or van Tulder scores of >5 indicated high-quality RCTs. The effect on RCT quality of including funding source and institutional review board (IRB) approval statements and describing the intervention was assessed. In addition, changes in RCT topics over time were assessed. Annual RCT frequencies did not change significantly (6.7-15.7%): 36.1% and 25.7% described blinding and allocation concealment, respectively. Both tended to increase between 2013 and 2016, particularly 2013 and 2014. Funding statement inclusion (39.1% overall) and intervention description (78.2% overall) tended to increase steadily. IRB statement inclusion (60.4% overall) increased significantly (p < 0.01). Jadad scores and van Tulder rose significantly until 2014 (p < 0.01). Frequencies of high-quality RCTs tended to rise. CCRBT indicated that RCTs with a low risk of bias tended to increase until 2014. However, from 2015, Jadad scores, van Tulder, and CCRBT the low risk tended to decreased. RCTs with funding and IRB approval statements had higher Jadad and van Tulder scores than unfunded RCTs (p < 0.01 and p < 0.01, respectively). Intervention description did not associate with better quality. RCT quality improved over time, but a dip in quality was observed in 2015-2016 because of decreased blinding and allocation concealment.

  1. 7 CFR 58.928 - Quality control tests.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... quality test shall be made to determine product stability. ... 7 Agriculture 3 2013-01-01 2013-01-01 false Quality control tests. 58.928 Section 58.928... Procedures § 58.928 Quality control tests. All dairy products and other ingredients shall be subject to...

  2. 7 CFR 58.928 - Quality control tests.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... quality test shall be made to determine product stability. ... 7 Agriculture 3 2012-01-01 2012-01-01 false Quality control tests. 58.928 Section 58.928... Procedures § 58.928 Quality control tests. All dairy products and other ingredients shall be subject to...

  3. 75 FR 3509 - Public Company Accounting Oversight Board; Order Approving Proposed Rules on Auditing Standard No...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-21

    ... Accounting Oversight Board; Order Approving Proposed Rules on Auditing Standard No. 7, Engagement Quality... Accounting Oversight Board (the ``Board'' or the ``PCAOB'') filed with the Securities and Exchange Commission... standards for public company audits, including a requirement for each registered public accounting firm to...

  4. Proteomics Quality Control: Quality Control Software for MaxQuant Results.

    PubMed

    Bielow, Chris; Mastrobuoni, Guido; Kempa, Stefan

    2016-03-04

    Mass spectrometry-based proteomics coupled to liquid chromatography has matured into an automatized, high-throughput technology, producing data on the scale of multiple gigabytes per instrument per day. Consequently, an automated quality control (QC) and quality analysis (QA) capable of detecting measurement bias, verifying consistency, and avoiding propagation of error is paramount for instrument operators and scientists in charge of downstream analysis. We have developed an R-based QC pipeline called Proteomics Quality Control (PTXQC) for bottom-up LC-MS data generated by the MaxQuant software pipeline. PTXQC creates a QC report containing a comprehensive and powerful set of QC metrics, augmented with automated scoring functions. The automated scores are collated to create an overview heatmap at the beginning of the report, giving valuable guidance also to nonspecialists. Our software supports a wide range of experimental designs, including stable isotope labeling by amino acids in cell culture (SILAC), tandem mass tags (TMT), and label-free data. Furthermore, we introduce new metrics to score MaxQuant's Match-between-runs (MBR) functionality by which peptide identifications can be transferred across Raw files based on accurate retention time and m/z. Last but not least, PTXQC is easy to install and use and represents the first QC software capable of processing MaxQuant result tables. PTXQC is freely available at https://github.com/cbielow/PTXQC .

  5. 14 CFR 21.143 - Quality control data requirements; prime manufacturer.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., purchased items, and parts and assemblies produced by manufacturers' suppliers including methods used to... special manufacturing processes involved, the means used to control the processes, the final test... procedure for recording review board decisions and disposing of rejected parts; (5) An outline of a system...

  6. 78 FR 40743 - Board of Scientific Counselors, Office of Public Health Preparedness and Response, Board of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-08

    ... Scientific Counselors, Office of Public Health Preparedness and Response, Board of Scientific Counselors (BSC... Director, Centers for Disease Control and Prevention (CDC), and the Director, Office of Public Health... Public Health Practice Executive Assistant, Centers for Disease Control and Prevention, 1600 Clifton Road...

  7. 7 CFR 981.442 - Quality control.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Quality control. 981.442 Section 981.442 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Administrative Rules and Regulations § 981.442 Quality control. (a) Incoming. Pursuant to § 981.42(a), the...

  8. 7 CFR 981.442 - Quality control.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Quality control. 981.442 Section 981.442 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... Administrative Rules and Regulations § 981.442 Quality control. (a) Incoming. Pursuant to § 981.42(a), the...

  9. 7 CFR 981.442 - Quality control.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Quality control. 981.442 Section 981.442 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Administrative Rules and Regulations § 981.442 Quality control. (a) Incoming. Pursuant to § 981.42(a), the...

  10. Ergonomics intervention on an alternative design of a spinal board.

    PubMed

    Zadry, Hilma Raimona; Susanti, Lusi; Rahmayanti, Dina

    2017-09-01

    A spinal board is the evacuation tool of first aid to help the injured spinal cord. The existing spinal board has several weaknesses, both in terms of user comfort and the effectiveness and efficiency of the evacuation process. This study designs an ergonomic spinal board using the quality function deployment approach. A preliminary survey was conducted through direct observation and interviews with volunteers from the Indonesian Red Cross. Data gathered were translated into a questionnaire and answered by 47 participants in West Sumatra. The results indicate that the selection of materials, the application of strap systems as well as the addition of features are very important in designing an ergonomic spinal board. The data were used in designing an ergonomic spinal board. The use of anthropometric data ensures that this product can accommodate safety and comfort when immobilized, as well as the flexibility and speed of the rescue evacuation process.

  11. School Boards as Policy-Makers.

    ERIC Educational Resources Information Center

    Coleman, Peter

    Decision-making in general and policy decisions in particular are the prime responsibility of school boards because policies are control mechanisms by which trustees assert local control. Policy decisions differ from others in their concern with values and purposes and the legitimization of the organization to society at large. Additionally, they…

  12. Contributions of CCLM to advances in quality control.

    PubMed

    Kazmierczak, Steven C

    2013-01-01

    Abstract The discipline of laboratory medicine is relatively young when considered in the context of the history of medicine itself. The history of quality control, within the context of laboratory medicine, also enjoys a relatively brief, but rich history. Laboratory quality control continues to evolve along with advances in automation, measurement techniques and information technology. Clinical Chemistry and Laboratory Medicine (CCLM) has played a key role in helping disseminate information about the proper use and utility of quality control. Publication of important advances in quality control techniques and dissemination of guidelines concerned with laboratory quality control has undoubtedly helped readers of this journal keep up to date on the most recent developments in this field.

  13. The case for nursing leaders on hospital boards.

    PubMed

    Weiss, Cathy Siegel; Pettker, John D

    2015-01-01

    At Children's Hospital Los Angeles (CHLA), the participation of our chief nursing officer (CNO) as a voting member on our governing board has been crucial to effective functioning in several areas, particularly those that impact the safety and quality of our patient care services, as well as our entire organization's financial and operational efficiency. As a voting member of our Board of Trustees and 2 standing committees, our CNO has a voice that carries authority and credibility, serving as a conduit between her Trustee colleagues and the nursing troops she leads, who constitute more than half of CHLA employees. Our CNO communicates to the board our nurses' concerns and perspective and in return conveys to nurses the information necessary to implement the board's policies and strategic decisions. As we consider how to ensure CHLA's future as a premier pediatric academic medical center, we understand that the results of the board's work would be impaired if it did not take into account the responsibilities and challenges faced by nurses. We would miss a vital contributor if our CNO was not involved in the hospital's governance at the highest levels.

  14. A Matter of Money? Policy Analysis of Rural Boarding Schools in China

    ERIC Educational Resources Information Center

    Zhao, Zhenzhou

    2011-01-01

    The Chinese government has shifted the pattern of rural schooling over the past decade, replacing village schools with urban boarding schools. The stated goal is to improve school quality, while deploying resources more effectively. However, the new boarding schools fail to provide a safe, healthy environment or protect and enable students' human…

  15. 77 FR 3843 - Agency Information Collection (Board of Veterans' Appeals Customer Satisfaction With Hearing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-25

    ... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0548] Agency Information Collection (Board of Veterans' Appeals Customer Satisfaction With Hearing Survey) Under OMB Review AGENCY: Board of Veterans.... Title: Board of Veterans' Appeals Customer Satisfaction with Hearing Survey, VA Form 0745. OMB Control...

  16. 7 CFR 58.733 - Quality control tests.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Quality control tests. 58.733 Section 58.733... Procedures § 58.733 Quality control tests. (a) Chemical analyses. The following chemical analyses shall be... pasteurization by means of the phosphatase test, as well as any other tests necessary to assure good quality...

  17. 7 CFR 58.733 - Quality control tests.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Quality control tests. 58.733 Section 58.733... Procedures § 58.733 Quality control tests. (a) Chemical analyses. The following chemical analyses shall be... pasteurization by means of the phosphatase test, as well as any other tests necessary to assure good quality...

  18. Quality-control design for surface-water sampling in the National Water-Quality Network

    USGS Publications Warehouse

    Riskin, Melissa L.; Reutter, David C.; Martin, Jeffrey D.; Mueller, David K.

    2018-04-10

    The data-quality objectives for samples collected at surface-water sites in the National Water-Quality Network include estimating the extent to which contamination, matrix effects, and measurement variability affect interpretation of environmental conditions. Quality-control samples provide insight into how well the samples collected at surface-water sites represent the true environmental conditions. Quality-control samples used in this program include field blanks, replicates, and field matrix spikes. This report describes the design for collection of these quality-control samples and the data management needed to properly identify these samples in the U.S. Geological Survey’s national database.

  19. Multi-institutional arrangements: relationships between governing boards and hospital chief executive officers.

    PubMed

    Alexander, J; Morlock, L L

    1985-02-01

    This investigation focuses on the impact of multi-institutional arrangements on the role of governing boards in limiting or enhancing the managerial autonomy of individual hospitals. Data from a 1979 Special Survey by the American Hospital Association (N = 4213) are used to examine governing board-administrator relationships as a function of the degree of autonomy and scope of responsibility of the hospital governing board. It is hypothesized that governing boards responsible for multiple hospitals or for multiple nonhospital organizations and those boards accountable to a higher organizational authority will exercise more formal control over hospital chief executive officers (CEOs) than will boards of single or autonomous hospitals. The analysis assumes that formal control by the governing board over the management function of the individual hospital is exercised partly through soliciting or limiting participation by hospital administrators in key policy decisions and through the evaluation of administrative performance. Therefore, it is anticipated that hospitals governed by boards with multiple responsibilities as well as hospitals governed by boards accountable to a higher authority will be (1) less likely to have CEOs who are members of the governing board executive committee, (2) more likely to have annual performance reviews of the CEO by the governing board, and (3) more likely to have such reviews conducted according to preestablished criteria. Study results provide general support for the hypotheses with respect to hospital boards with multiple responsibilities: the data suggest that such boards do exercise greater control over hospital administrators and these effects do appear to be stronger for hospitals in the private sector. Hospitals governed by boards accountable to a higher authority, however, are more likely to have CEOs who are members of the governing board executive committee--a pattern in direct opposition to that hypothesized. Furthermore

  20. Multi-institutional arrangements: relationships between governing boards and hospital chief executive officers.

    PubMed Central

    Alexander, J; Morlock, L L

    1985-01-01

    This investigation focuses on the impact of multi-institutional arrangements on the role of governing boards in limiting or enhancing the managerial autonomy of individual hospitals. Data from a 1979 Special Survey by the American Hospital Association (N = 4213) are used to examine governing board-administrator relationships as a function of the degree of autonomy and scope of responsibility of the hospital governing board. It is hypothesized that governing boards responsible for multiple hospitals or for multiple nonhospital organizations and those boards accountable to a higher organizational authority will exercise more formal control over hospital chief executive officers (CEOs) than will boards of single or autonomous hospitals. The analysis assumes that formal control by the governing board over the management function of the individual hospital is exercised partly through soliciting or limiting participation by hospital administrators in key policy decisions and through the evaluation of administrative performance. Therefore, it is anticipated that hospitals governed by boards with multiple responsibilities as well as hospitals governed by boards accountable to a higher authority will be (1) less likely to have CEOs who are members of the governing board executive committee, (2) more likely to have annual performance reviews of the CEO by the governing board, and (3) more likely to have such reviews conducted according to preestablished criteria. Study results provide general support for the hypotheses with respect to hospital boards with multiple responsibilities: the data suggest that such boards do exercise greater control over hospital administrators and these effects do appear to be stronger for hospitals in the private sector. Hospitals governed by boards accountable to a higher authority, however, are more likely to have CEOs who are members of the governing board executive committee--a pattern in direct opposition to that hypothesized. Furthermore

  1. Advanced strategies for quality control of Chinese medicines.

    PubMed

    Zhao, Jing; Ma, Shuang-Cheng; Li, Shao-Ping

    2018-01-05

    Quality control is always the critical issue for Chinese medicines (CMs) with their worldwide increasing use. Different from western medicine, CMs are usually considered that multiple constituents are responsible for the therapeutic effects. Therefore, quality control of CMs is a challenge. In 2011, the strategies for quantification, related to the markers, reference compounds and approaches, in quality control of CMs were reviewed (Li, et al., J. Pharm. Biomed. Anal., 2011, 55, 802-809). Since then, some new strategies have been proposed in these fields. Therefore, the review on the strategies for quality control of CMs should be updated to improve the safety and efficacy of CMs. Herein, novel strategies related to quality marker discovery, reference compound development and advanced approaches (focused on glyco-analysis) for quality control, during 2011-2016, were summarized and discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Choosing Excellence: National Board Certification. Q & A Guide for Teachers and Other Educators

    ERIC Educational Resources Information Center

    National Board for Professional Teaching Standards, 2009

    2009-01-01

    National Board Certification is administered by the National Board for Professional Teaching Standards, to advance the quality of teaching and learning by developing professional standards for accomplished teaching, creating a voluntary system to certify teachers who meet those standards and integrating certified teachers into educational reform…

  3. Impact of a board-game approach on current smokers: a randomized controlled trial

    PubMed Central

    2013-01-01

    Background The main objective of our study was to assess the impact of a board game on smoking status and smoking-related variables in current smokers. To accomplish this objective, we conducted a randomized controlled trial comparing the game group with a psychoeducation group and a waiting-list control group. Methods The following measures were performed at participant inclusion, as well as after a 2-week and a 3-month follow-up period: “Attitudes Towards Smoking Scale” (ATS-18), “Smoking Self-Efficacy Questionnaire” (SEQ-12), “Attitudes Towards Nicotine Replacement Therapy” scale (ANRT-12), number of cigarettes smoked per day, stages of change, quit attempts, and smoking status. Furthermore, participants were assessed for concurrent psychiatric disorders and for the severity of nicotine dependence with the Fagerström Test for Nicotine Dependence (FTND). Results A time × group effect was observed for subscales of the ANRT-12, ATS-18 and SEQ-12, as well as for the number of cigarettes smoked per day. At three months follow-up, compared to the participants allocated to the waiting list group, those on Pick-Klop group were less likely to remain smoker. Outcomes at 3 months were not predicted by gender, age, FTND, stage of change, or psychiatric disorders at inclusion. Conclusions The board game seems to be a good option for smokers. The game led to improvements in variables known to predict quitting in smokers. Furthermore, it increased smoking-cessation rates at 3-months follow-up. The game is also an interesting alternative for smokers in the precontemplation stage. PMID:23327643

  4. Commentary: presenting the value of medical quality to nonclinical senior management and boards of directors.

    PubMed

    Fetterolf, Donald E

    2003-01-01

    Many physicians find hospital or health plan boards of directors to be intimidating arenas for medical quality presentations. This essay presents a number of "pearls" gleaned from successful senior clinician managers who have learned to relate to senior management and advance in their careers. This commentary was developed from research and a presentation of the same title delivered at the American College of Medical Quality Annual Meeting held in Las Vegas in October, 2001. It is important that medical directors who work with financial managers convert quality concepts into "business value" concepts. Talking in the language of business, rather than the language of doctors, makes it much easier to communicate with management (although some translation is often in order). As a clinician presenting to financial managers, you should become familiar with financial terms and how they are used. Indeed, the development of a financial model representing clinical activity results in the highest level of success. There are a number of methods for estimating impact that have been found within general business and health services research areas that are acceptable. Successful presenters of information approach their task effectively. Reports are in a more readable format and convey information for action by the corporation rather than as a scholarly treatise. Approaching senior management, one must consider the psychology of individuals in senior positions. Senior medical executives who are successful report similar approaches to their tasks, and offer helpful insight into career advancement.

  5. 30 CFR 28.30 - Quality control plans; filing requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Quality control plans; filing requirements. 28... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.30 Quality control plans; filing... part, each applicant shall file with MSHA a proposed quality control plan which shall be designed to...

  6. 30 CFR 28.30 - Quality control plans; filing requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Quality control plans; filing requirements. 28... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.30 Quality control plans; filing... part, each applicant shall file with MSHA a proposed quality control plan which shall be designed to...

  7. 30 CFR 28.30 - Quality control plans; filing requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.30 Quality control plans; filing... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Quality control plans; filing requirements. 28... part, each applicant shall file with MSHA a proposed quality control plan which shall be designed to...

  8. 30 CFR 28.30 - Quality control plans; filing requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.30 Quality control plans; filing... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Quality control plans; filing requirements. 28... part, each applicant shall file with MSHA a proposed quality control plan which shall be designed to...

  9. 30 CFR 28.30 - Quality control plans; filing requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.30 Quality control plans; filing... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Quality control plans; filing requirements. 28... part, each applicant shall file with MSHA a proposed quality control plan which shall be designed to...

  10. American Board of Medical Specialties and Repositioning for Excellence in Lifelong Learning: Maintenance of Certification

    ERIC Educational Resources Information Center

    Miller, Stephen H.

    2005-01-01

    The board certification movement was founded out of a concern for the quality of care, and today, more than 85% of all physicians licensed to practice medicine in the United States have been certified by an American Board of Medical Specialties (ABMS) member board. There is increasing evidence of a need for continuous monitoring and promotion of…

  11. 21 CFR 864.8625 - Hematology quality control mixture.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Hematology quality control mixture. 864.8625 Section 864.8625 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... quality control mixture. (a) Identification. A hematology quality control mixture is a device used to...

  12. Data Relay Board with Protocol for High-Speed, Free-Space Optical Communications

    NASA Technical Reports Server (NTRS)

    Wright, Malcolm; Clare, Loren; Gould, Gary; Pedyash, Maxim

    2004-01-01

    In a free-space optical communication system, the mitigation of transient outages through the incorporation of error-control methods is of particular concern, the outages being caused by scintillation fades and obscurants. The focus of this innovative technology is the development of a data relay system for a reliable high-data-rate free-spacebased optical-transport network. The data relay boards will establish the link, maintain synchronous connection, group the data into frames, and provide for automatic retransmission (ARQ) of lost or erred frames. A certain Quality of Service (QoS) can then be ensured, compatible with the required data rate. The protocol to be used by the data relay system is based on the draft CCSDS standard data-link protocol Proximity-1, selected by orbiters to multiple lander assets in the Mars network, for example. In addition to providing data-link protocol capabilities for the free-space optical link and buffering the data, the data relay system will interface directly with user applications over Gigabit Ethernet and/or with highspeed storage resources via Fibre Channel. The hardware implementation is built on a network-processor-based architecture. This technology combines the power of a hardware switch capable of data switching and packet routing at Gbps rates, with the flexibility of a software- driven processor that can host highly adaptive and reconfigurable protocols used, for example, in wireless local-area networks (LANs). The system will be implemented in a modular multi-board fashion. The main hardware elements of the data relay system are the new data relay board developed by Rockwell Scientific, a COTS Gigabit Ethernet board for user interface, and a COTS Fibre Channel board that connects to local storage. The boards reside in a cPCI back plane, and can be housed in a VME-type enclosure.

  13. Cellular Strategies of Protein Quality Control

    PubMed Central

    Chen, Bryan; Retzlaff, Marco; Roos, Thomas; Frydman, Judith

    2011-01-01

    Eukaryotic cells must contend with a continuous stream of misfolded proteins that compromise the cellular protein homeostasis balance and jeopardize cell viability. An elaborate network of molecular chaperones and protein degradation factors continually monitor and maintain the integrity of the proteome. Cellular protein quality control relies on three distinct yet interconnected strategies whereby misfolded proteins can either be refolded, degraded, or delivered to distinct quality control compartments that sequester potentially harmful misfolded species. Molecular chaperones play a critical role in determining the fate of misfolded proteins in the cell. Here, we discuss the spatial and temporal organization of cellular quality control strategies and their implications for human diseases linked to protein misfolding and aggregation. PMID:21746797

  14. 21 CFR 211.22 - Responsibilities of quality control unit.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Responsibilities of quality control unit. 211.22... Personnel § 211.22 Responsibilities of quality control unit. (a) There shall be a quality control unit that... have been fully investigated. The quality control unit shall be responsible for approving or rejecting...

  15. 21 CFR 211.22 - Responsibilities of quality control unit.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Responsibilities of quality control unit. 211.22... Personnel § 211.22 Responsibilities of quality control unit. (a) There shall be a quality control unit that... have been fully investigated. The quality control unit shall be responsible for approving or rejecting...

  16. 40 CFR 81.112 - Charleston Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Regions § 81.112 Charleston Intrastate Air Quality Control Region. The Charleston Intrastate Air Quality Control Region (South Carolina) consists of the territorial area encompassed by the... Quality Control Region: Region 1. 81.107Greenwood Intrastate Air Quality Control Region: Region 2. 81...

  17. 40 CFR 81.112 - Charleston Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Regions § 81.112 Charleston Intrastate Air Quality Control Region. The Charleston Intrastate Air Quality Control Region (South Carolina) consists of the territorial area encompassed by the... Quality Control Region: Region 1. 81.107Greenwood Intrastate Air Quality Control Region: Region 2. 81...

  18. 7 CFR 275.21 - Quality control review reports.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 4 2011-01-01 2011-01-01 false Quality control review reports. 275.21 Section 275.21... Reporting on Program Performance § 275.21 Quality control review reports. (a) General. Each State agency shall submit reports on the performance of quality control reviews in accordance with the requirements...

  19. Corning Community College By-Laws of the Board of Trustees.

    ERIC Educational Resources Information Center

    Corning Community Coll., NY.

    This publication gives the complete by-laws (including amendments) of the Corning Community College as they deal with (1) administrative control and powers and duties of the board of trustees, (2) terms of office and duties of officers and committees of the board, (3) time, place, frequency, and procedures of meetings of the board, (4) functions…

  20. Board-to-board optical interconnection using novel optical plug and slot

    NASA Astrophysics Data System (ADS)

    Cho, In K.; Yoon, Keun Byoung; Ahn, Seong H.; Kim, Jin Tae; Lee, Woo Jin; Shin, Kyoung Up; Heo, Young Un; Park, Hyo Hoon

    2004-10-01

    A novel optical PCB with transmitter/receiver system boards and optical bakcplane was prepared, which is board-to-board interconnection by optical plug and slot. We report an 8Gb/s PRBS NRZ data transmission between transmitter system board and optical backplane embedded multimode polymeric waveguide arrays. The basic concept of ETRI's optical PCB is as follows; 1) Metal optical bench is integrated with optoelectronic devices, driver and receiver circuits, polymeric waveguide and access line PCB module. 2) Multimode polymeric waveguide inside an optical backplane, which is embedded into PCB. 3) Optical slot and plug for high-density(channel pitch : 500um) board-to-board interconnection. The polymeric waveguide technology can be used for transmission of data on transmitter/ receiver system boards and for backplane interconnections. The main components are low-loss tapered polymeric waveguides and a novel optical plug and slot for board-to-board interconnections, respectively. The optical PCB is characteristic of low coupling loss, easy insertion/extraction of the boards and, especially, reliable optical coupling unaffected from external environment after board insertion.

  1. 40 CFR 81.88 - Billings Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Regions § 81.88 Billings Intrastate Air Quality Control Region. The Metropolitan Billings Intrastate Air Quality Control Region (Montana) has been renamed the Billings Intrastate Air Quality Control... to by Montana authorities as follows: Sec. 481.168Great Falls Intrastate Air Quality Control Region...

  2. 40 CFR 81.88 - Billings Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Regions § 81.88 Billings Intrastate Air Quality Control Region. The Metropolitan Billings Intrastate Air Quality Control Region (Montana) has been renamed the Billings Intrastate Air Quality Control... to by Montana authorities as follows: Sec. 481.168Great Falls Intrastate Air Quality Control Region...

  3. The relationship between social capital and quality management systems in European hospitals: a quantitative study.

    PubMed

    Hammer, Antje; Arah, Onyebuchi A; Dersarkissian, Maral; Thompson, Caroline A; Mannion, Russell; Wagner, Cordula; Ommen, Oliver; Sunol, Rosa; Pfaff, Holger

    2013-01-01

    Strategic leadership is an important organizational capability and is essential for quality improvement in hospital settings. Furthermore, the quality of leadership depends crucially on a common set of shared values and mutual trust between hospital management board members. According to the concept of social capital, these are essential requirements for successful cooperation and coordination within groups. We assume that social capital within hospital management boards is an important factor in the development of effective organizational systems for overseeing health care quality. We hypothesized that the degree of social capital within the hospital management board is associated with the effectiveness and maturity of the quality management system in European hospitals. We used a mixed-method approach to data collection and measurement in 188 hospitals in 7 European countries. For this analysis, we used responses from hospital managers. To test our hypothesis, we conducted a multilevel linear regression analysis of the association between social capital and the quality management system score at the hospital level, controlling for hospital ownership, teaching status, number of beds, number of board members, organizational culture, and country clustering. The average social capital score within a hospital management board was 3.3 (standard deviation: 0.5; range: 1-4) and the average hospital score for the quality management index was 19.2 (standard deviation: 4.5; range: 0-27). Higher social capital was associated with higher quality management system scores (regression coefficient: 1.41; standard error: 0.64, p=0.029). The results suggest that a higher degree of social capital exists in hospitals that exhibit higher maturity in their quality management systems. Although uncontrolled confounding and reverse causation cannot be completely ruled out, our new findings, along with the results of previous research, could have important implications for the work of

  4. Strategic Plan. Vermont State Board of Education: Department of Education

    ERIC Educational Resources Information Center

    Vermont Department of Education, 2004

    2004-01-01

    The five-year plan is expressed in the five goals listed below, which are based on the respective Board and department roles and responsibilities. (1) Support high-quality, innovative instruction to improve student achievement; (2) Provide and promote high-quality educational leadership; (3) Promote safe and positive learning environments; (4)…

  5. Cellulose nanofiber board.

    PubMed

    Yousefi, Hossein; Azad, Sona; Mashkour, Mahdi; Khazaeian, Abolghasem

    2018-05-01

    A cellulose nanofiber board (CNF-board) with a nominal thickness of 3 mm was fabricated without adhesive or additive. To provide comparison, a cellulose fiber board (CF-board) was also fabricated. A novel cold pre-press apparatus was made to dewater highly absorbent CNF gel prior to drying. A mild drying condition in the vacuum oven at 70 °C and 0.005 MPa was enough to provide the CNF-board with a density of 1.3 g/cm 3 thanks to its self-densification capability. Unlike the CF-board, the fabricated CNF-board had a high water-activated dimensional recovery ratio (averagely 96%) during the five cyclic wetting-drying process. The flexural and tensile strengths of CNF-board obtained were 162 MPa and 85 MPa, respectively. The corresponding values for CF-board were 28 MPa and 11 MPa, respectively. The specific flexural and tensile strengths of CNF-board obtained were higher than those of CF-board as well as some other traditional wood-based composites, polymers and structural ASTM A36 steel. Copyright © 2018 Elsevier Ltd. All rights reserved.

  6. A standing location detector enabling people with developmental disabilities to control environmental stimulation through simple physical activities with Nintendo Wii Balance Boards.

    PubMed

    Shih, Ching-Hsiang

    2011-01-01

    This study evaluated whether two people with developmental disabilities would be able to actively perform simple physical activities by controlling their favorite environmental stimulation using Nintendo Wii Balance Boards with a newly developed standing location detection program (SLDP, i.e., a new software program turning a Nintendo Wii Balance Board into a standing location detector). This study was carried out using to an ABAB design. The data showed that both participants significantly increased their simple physical activity (target response) to activate the control system to produce environmental stimulation during the B (intervention) phases. The practical and developmental implications of the findings are discussed. Copyright © 2010 Elsevier Ltd. All rights reserved.

  7. Implementation of hospital governing boards: views from the field.

    PubMed

    McNatt, Zahirah; Thompson, Jennifer W; Mengistu, Abraham; Tatek, Dawit; Linnander, Erika; Ageze, Leulseged; Lawson, Ruth; Berhanu, Negalign; Bradley, Elizabeth H

    2014-04-17

    Decentralization through the establishment of hospital governing boards has been touted as an effective way to improve the quality and efficiency of hospitals in low-income countries. Although several studies have examined the process of decentralization, few have quantitatively assessed the implementation of hospital governing boards and their impact on hospital performance. Therefore, we sought to describe the functioning of governing boards and to determine the association between governing board functioning and hospital performance. We conducted a cross-sectional study with governing board chairpersons to assess board (1) structure, (2) roles and responsibilities and (3) training and orientation practices. Using bivariate analysis and multivariable regression, we examined the association between governing board functioning and hospital performance. Hospital performance indicators: 1) percent of hospital management standards met, measured with the Ethiopian Hospital Reform Implementation Guidelines and 2) patient experience, measured with the Inpatient and Outpatient Assessment of Healthcare surveys. A total of 92 boards responded to the survey (96% response rate). The average percentage of EHRIG standards met was 58.1% (standard deviation (SD) 21.7 percentage points), and the mean overall patient experience score was 7.2 (SD 2.2). Hospitals with greater hospital management standards met had governing boards that paid members, reviewed performance in several domains quarterly or more frequently, developed new revenue sources, determined services to be outsourced, reviewed patient complaints, and had members with knowledge in business and financial management (all P-values < 0.05). Hospitals with more positive patient experience had governing boards that developed new revenue sources, determined services to be outsourced, and reviewed patient complaints (all P-values < 0.05). These cross-sectional data suggest that strengthening governing boards to

  8. Sediment Quality Characterization Naval Station San Diego

    DTIC Science & Technology

    1999-01-01

    Bioassays using an am- phipod (Rhepoxynius abronius), larvae of the sea urchin (Strongylocentrotus purpuratus), and larval abalone (Haliotis sp.) indicated...sulfide (AVS) and simultaneously extracted metal ( SEM ) in bulk sedim ent (pm ole.g-dry1...Diego Gas & Electric SDIWQR San Diego Interagency Water Quality Control Board SEM Simultaneously Extracted Metals Si Silicon SI Site Investigation SOD

  9. 49 CFR 1182.4 - Board review of the application.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Board review of the application. 1182.4 Section 1182.4 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION RULES OF PRACTICE PURCHASE, MERGER, AND CONTROL OF MOTOR PASSENGER...

  10. On-Board Mining in the Sensor Web

    NASA Astrophysics Data System (ADS)

    Tanner, S.; Conover, H.; Graves, S.; Ramachandran, R.; Rushing, J.

    2004-12-01

    On-board data mining can contribute to many research and engineering applications, including natural hazard detection and prediction, intelligent sensor control, and the generation of customized data products for direct distribution to users. The ability to mine sensor data in real time can also be a critical component of autonomous operations, supporting deep space missions, unmanned aerial and ground-based vehicles (UAVs, UGVs), and a wide range of sensor meshes, webs and grids. On-board processing is expected to play a significant role in the next generation of NASA, Homeland Security, Department of Defense and civilian programs, providing for greater flexibility and versatility in measurements of physical systems. In addition, the use of UAV and UGV systems is increasing in military, emergency response and industrial applications. As research into the autonomy of these vehicles progresses, especially in fleet or web configurations, the applicability of on-board data mining is expected to increase significantly. Data mining in real time on board sensor platforms presents unique challenges. Most notably, the data to be mined is a continuous stream, rather than a fixed store such as a database. This means that the data mining algorithms must be modified to make only a single pass through the data. In addition, the on-board environment requires real time processing with limited computing resources, thus the algorithms must use fixed and relatively small amounts of processing time and memory. The University of Alabama in Huntsville is developing an innovative processing framework for the on-board data and information environment. The Environment for On-Board Processing (EVE) and the Adaptive On-board Data Processing (AODP) projects serve as proofs-of-concept of advanced information systems for remote sensing platforms. The EVE real-time processing infrastructure will upload, schedule and control the execution of processing plans on board remote sensors. These plans

  11. 7 CFR 58.141 - Alternate quality control program.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Alternate quality control program. 58.141 Section 58... Service 1 Quality Specifications for Raw Milk § 58.141 Alternate quality control program. When a plant has in operation an acceptable quality program, at the producer level, which is approved by the...

  12. 21 CFR 111.105 - What must quality control personnel do?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 2 2011-04-01 2011-04-01 false What must quality control personnel do? 111.105... for Quality Control § 111.105 What must quality control personnel do? Quality control personnel must... manufacturing record. To do so, quality control personnel must perform operations that include: (a) Approving or...

  13. Theoretical approach to society-wide environmental quality control

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ayano, K.

    1982-01-01

    The study outlines the basis for a theory of societal control of environmental quality in the US based on the concepts and philosophy of company-wide quality control which has developed in Japan as a cross-disciplinary approach to problem-solving in the industrial realm. The basic concepts are: 1) every member of society, as a producer of environmental products and services for future generations, in principle has the responsibility to control the quality of his output; 2) environment quality is the quality of life, or the fitness of use of environment for humans; and 3) societal control is any activity necessary formore » quality production of environmental products and services continuously or in the long run. A motivator-hygiene theory of environmental quality is identified, and a proposal is made that the policy provision must be formulated differently between those aimed at hygiene factors of environmental quality and those aimed at motivators, the former in a collectivistic manner, the latter as an individual problem. The concept of societal cost of environmental quality is introduced. Based on the motivator-hygiene theory of environmental quality, the collectivistic and individual approaches are differentiated and discussed.« less

  14. What Factors Influence a Teacher's Decision to Renew National Board Certification?

    ERIC Educational Resources Information Center

    Teague, Kelly Lynne

    2017-01-01

    Building on the research of National Board Certification and its effect on teacher quality, student achievement, and professional development, this dissertation seeks to explore the factors that influence teachers when it is time to renew their National Board Certification. Using a qualitative methodology, this study seeks to describe the process…

  15. Systemwide board assessment.

    PubMed

    Hafertepe, E C

    1987-01-01

    The Sisters of Charity Health Care System (SCHCS), Inc., Cincinnati, undertook a systemwide board evaluation project to support and enhance effective aspects of governance and to deal with obstacles that often arise due to differing beliefs and role confusion. A task force of chief executive officers developed the questionnaire, which was then administered to members of individual facilities' boards and the system's board. The documented highlighted value issues important to SCHCS's ministry and business activities: overall board responsibilities, financial responsibilities, strategic planning, the board's role, committee structures, the board's operating process, board education, and overall board effectiveness. The responses from each member were returned to the local boards, who analyzed them and developed an action plan. A summary of each facility's responses and action plans were forwarded to the system's corporate office. The CEO committee critiqued the process and reported on significant issues and action plans. In general, survey results revealed a strong influence of mission and philosophy in decision making, support for current processes, and effective interaction among board members. The system's corporate office will use the responses to respond to a dynamic environment and strengthen their role in the delivery of Catholic health care services.

  16. Study of orbiter/payload interface communications configuration control board directive from an operational perspective

    NASA Technical Reports Server (NTRS)

    Addis, A. W.; Tatosian, C. G.; Lidsey, J. F.

    1974-01-01

    Orbiter/payload data and communications interface was examined. It was found that the Configuration Control Board Directive (CCBD) greatly increases the capability of the orbiter to communicate with a wide variety of projected shuttle payloads. Rather than being derived from individual payload communication requirements, the CCBD appears to be based on an operational philosophy that requires the orbiter to duplicate or augment the ground network/payload communication links. It is suggested that the implementation of the CCBD be reviewed and compared with the Level 1 Program Requirements Document, differences reconciled, and interface characteristics defined.

  17. Water-Quality Data for Selected Stream Sites in Bridgeport Valley, Mono County, California, April 2000 to June 2003

    USGS Publications Warehouse

    Rockwell, Gerald L.; Honeywell, Paul D.

    2004-01-01

    The U.S. Geological Survey, in cooperation with the California Regional Water Quality Control Board, Lahonton Region, carried out a water-quality data collection program of selected streams in and near Bridgeport Valley, California, during April 2000 to June 2003. These data were collected to provide information used by the California Regional Water Quality Control Board to develop total maximum daily load standards. Field measurements of streamflow, barometric pressure, dissolved oxygen, pH, specific conductance, and water temperature were made at 15 sites located on 6 streams. Water samples were analyzed for nutrients, major ions, turbidity, fecal coliform, fecal streptococci, and suspended sediment. Field data, turbidity, nutrient, major ion, and sediment concentrations and fecal coliform and fecal streptococci densities are given in tables for each site. Field blank data are also presented in a table.

  18. Quality Control Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document contains 18 units to consider for use in a tech prep competency profile for the occupation of quality control technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific occupation and…

  19. 40 CFR 81.77 - Puerto Rico Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 17 2011-07-01 2011-07-01 false Puerto Rico Air Quality Control Region... PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.77 Puerto Rico Air Quality Control Region. The Puerto Rico Air Quality Control Region...

  20. 40 CFR 81.77 - Puerto Rico Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 17 2010-07-01 2010-07-01 false Puerto Rico Air Quality Control Region... PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.77 Puerto Rico Air Quality Control Region. The Puerto Rico Air Quality Control Region...

  1. 40 CFR 81.77 - Puerto Rico Air Quality Control Region.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 18 2012-07-01 2012-07-01 false Puerto Rico Air Quality Control Region... PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.77 Puerto Rico Air Quality Control Region. The Puerto Rico Air Quality Control Region...

  2. 40 CFR 81.77 - Puerto Rico Air Quality Control Region.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 18 2013-07-01 2013-07-01 false Puerto Rico Air Quality Control Region... PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.77 Puerto Rico Air Quality Control Region. The Puerto Rico Air Quality Control Region...

  3. [Hospital governance and the structure of German hospital supervisory boards].

    PubMed

    Kuntz, L; Pulm, J; Wittland, M

    2014-06-01

    When thinking about corporate governance frequently the supervisory board comes to mind. The aim of this study is to investigate the relationship between the participation of single professions in the supervisory board and hospital financial performance. Based on governance codes, relevant professions that should be part of the supervisory board are identified. With the help of a multiple regression, the relationship between the fractions of these professions in the supervisory board and the return on assets in the year 2009 is examined. The sample consists of 182 hospitals. The study shows that participation of physicians in the supervisory board is related to a higher return on assets. Furthermore, the association between the fractions of nurses and politicians and hospitals financial performance is ­negative. The composition of the supervisory board has a significant effect on hospital performance; it is an important issue for hospital owners. The present study identifies only one positive relationship between the involvement of physicians and financial performance. Other professions could be relevant in achieving other objectives. Further studies are necessary to analyse the effects on other dimensions of hospital performance, e. g., on quality. © Georg Thieme Verlag KG Stuttgart · New York.

  4. The Ontario Cancer Research Ethics Board: a central REB that works

    PubMed Central

    Chaddah, M.R.

    2008-01-01

    The Ontario Cancer Research Ethics Board (ocreb) has made its mark within Ontario as a successful, centralized, oncology-specific research ethics board. As such, ocreb has proven invaluable to principal investigators, sponsors, and study participants given its ability to reduce duplication during the submission process, to provide the highest quality of review, to shorten study start-up time, and to implement more efficient methods of reporting serious adverse events. PMID:18317585

  5. 21 CFR 111.105 - What must quality control personnel do?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What must quality control personnel do? 111.105..., LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Production and Process Control System: Requirements for Quality Control § 111.105 What must quality control personnel do? Quality control personnel must...

  6. Pattern Generator for Bench Test of Digital Boards

    NASA Technical Reports Server (NTRS)

    Berkun, Andrew C.; Chu, Anhua J.

    2012-01-01

    All efforts to develop electronic equipment reach a stage where they need a board test station for each board. The SMAP digital system consists of three board types that interact with each other using interfaces with critical timing. Each board needs to be tested individually before combining into the integrated digital electronics system. Each board needs critical timing signals from the others to be able to operate. A bench test system was developed to support test of each board. The test system produces all the outputs of the control and timing unit, and is delivered much earlier than the timing unit. Timing signals are treated as data. A large file is generated containing the state of every timing signal at any instant. This file is streamed out to an IO card, which is wired directly to the device-under-test (DUT) input pins. This provides a flexible test environment that can be adapted to any of the boards required to test in a standalone configuration. The problem of generating the critical timing signals is then transferred from a hardware problem to a software problem where it is more easily dealt with.

  7. Mechanism controller system for the optical spectroscopic and infrared remote imaging system instrument on board the Rosetta space mission

    NASA Astrophysics Data System (ADS)

    Castro Marín, J. M.; Brown, V. J. G.; López Jiménez, A. C.; Rodríguez Gómez, J.; Rodrigo, R.

    2001-05-01

    The optical, spectroscopic infrared remote imaging system (OSIRIS) is an instrument carried on board the European Space Agency spacecraft Rosetta that will be launched in January 2003 to study in situ the comet Wirtanen. The electronic design of the mechanism controller board (MCB) system of the two OSIRIS optical cameras, the narrow angle camera, and the wide angle camera, is described here. The system is comprised of two boards mounted on an aluminum frame as part of an electronics box that contains the power supply and the digital processor unit of the instrument. The mechanisms controlled by the MCB for each camera are the front door assembly and a filter wheel assembly. The front door assembly for each camera is driven by a four phase, permanent magnet stepper motor. Each filter wheel assembly consists of two, eight filter wheels. Each wheel is driven by a four phase, variable reluctance stepper motor. Each motor, for all the assemblies, also contains a redundant set of four stator phase windings that can be energized separately or in parallel with the main windings. All stepper motors are driven in both directions using the full step unipolar mode of operation. The MCB also performs general housekeeping data acquisition of the OSIRIS instrument, i.e., mechanism position encoders and temperature measurements. The electronic design application used is quite new due to use of a field programmable gate array electronic devices that avoid the use of the now traditional system controlled by microcontrollers and software. Electrical tests of the engineering model have been performed successfully and the system is ready for space qualification after environmental testing. This system may be of interest to institutions involved in future space experiments with similar needs for mechanisms control.

  8. A Total Quality-Control Plan with Right-Sized Statistical Quality-Control.

    PubMed

    Westgard, James O

    2017-03-01

    A new Clinical Laboratory Improvement Amendments option for risk-based quality-control (QC) plans became effective in January, 2016. Called an Individualized QC Plan, this option requires the laboratory to perform a risk assessment, develop a QC plan, and implement a QC program to monitor ongoing performance of the QC plan. Difficulties in performing a risk assessment may limit validity of an Individualized QC Plan. A better alternative is to develop a Total QC Plan including a right-sized statistical QC procedure to detect medically important errors. Westgard Sigma Rules provides a simple way to select the right control rules and the right number of control measurements. Copyright © 2016 Elsevier Inc. All rights reserved.

  9. 78 FR 68450 - Notice of Senior Executive Service Performance Review Board Membership

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-14

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Notice of Senior Executive Service Performance Review Board Membership The Agency for Healthcare Research and Quality (AHRQ) announces the appointment of members to the AHRQ Senior Executive Service (SES) Performance...

  10. 76 FR 76973 - Good Neighbor Environmental Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-09

    .... border with Mexico, and once in Washington, DC. It was created in 1992 by the Enterprise for the Americas... Administrator of EPA under Executive Order 12916. The Board is responsible for providing advice to the President... Mexico in order to improve the quality of life of persons residing on the United States side of the...

  11. 76 FR 73631 - Good Neighbor Environmental Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-29

    .... border with Mexico, and once in Washington, DC It was created in 1992 by the Enterprise for the Americas... of EPA under Executive Order 12916. The Board is responsible for providing advice to the President... Mexico in order to improve the quality of life of persons residing on the United States side of the...

  12. 76 FR 12731 - Good Neighbor Environmental Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-08

    .... border with Mexico, and once in Washington, DC. It was created in 1992 by the Enterprise for the Americas... Administrator of EPA under Executive Order 12916. The Board is responsible for providing advice to the President... Mexico in order to improve the quality of life of persons residing on the United States side of the...

  13. 76 FR 31328 - Good Neighbor Environmental Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-31

    .... border with Mexico, and once in Washington, DC. It was created in 1992 by the Enterprise for the Americas... Administrator of EPA under Executive Order 12916. The Board is responsible for providing advice to the President... Mexico in order to improve the quality of life of persons residing on the United States side of the...

  14. 77 FR 32636 - Good Neighbor Environmental Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-01

    .... border with Mexico, and once in Washington, DC. It was created in 1992 by the Enterprise for the Americas... Administrator of EPA under Executive Order 12916. The Board is responsible for providing advice to the President... Mexico in order to improve the quality of life of persons residing on the United States side of the...

  15. Getting boards on board a major challenge for integrated systems.

    PubMed

    Egger, E

    1998-12-01

    Among the challenges an integrated health care system faces is helping its board members make the transition away from a historic community philanthropic board toward a board with more of a business approach.

  16. 18 CFR 12.40 - Quality control programs.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... PROJECT WORKS Other Responsibilities of Applicant or Licensee § 12.40 Quality control programs. (a) General rule. During any construction, repair, or modification of project works, including any corrective... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Quality control...

  17. 18 CFR 12.40 - Quality control programs.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... PROJECT WORKS Other Responsibilities of Applicant or Licensee § 12.40 Quality control programs. (a) General rule. During any construction, repair, or modification of project works, including any corrective... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Quality control...

  18. 18 CFR 12.40 - Quality control programs.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... PROJECT WORKS Other Responsibilities of Applicant or Licensee § 12.40 Quality control programs. (a) General rule. During any construction, repair, or modification of project works, including any corrective... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Quality control...

  19. Hall-effect based semi-fast AC on-board charging equipment for electric vehicles.

    PubMed

    Milanés-Montero, María Isabel; Gallardo-Lozano, Javier; Romero-Cadaval, Enrique; González-Romera, Eva

    2011-01-01

    The expected increase in the penetration of electric vehicles (EV) and plug-in hybrid electric vehicles (PHEV) will produce unbalanced conditions, reactive power consumption and current harmonics drawn by the battery charging equipment, causing a great impact on the power quality of the future smart grid. A single-phase semi-fast electric vehicle battery charger is proposed in this paper. This ac on-board charging equipment can operate in grid-to-vehicle (G2V) mode, and also in vehicle-to-grid (V2G) mode, transferring the battery energy to the grid when the vehicle is parked. The charger is controlled with a Perfect Harmonic Cancellation (PHC) strategy, contributing to improve the grid power quality, since the current demanded or injected has no harmonic content and a high power factor. Hall-effect current and voltage transducers have been used in the sensor stage to carry out this control strategy. Experimental results with a laboratory prototype are presented.

  20. Hall-Effect Based Semi-Fast AC On-Board Charging Equipment for Electric Vehicles

    PubMed Central

    Milanés-Montero, María Isabel; Gallardo-Lozano, Javier; Romero-Cadaval, Enrique; González-Romera, Eva

    2011-01-01

    The expected increase in the penetration of electric vehicles (EV) and plug-in hybrid electric vehicles (PHEV) will produce unbalanced conditions, reactive power consumption and current harmonics drawn by the battery charging equipment, causing a great impact on the power quality of the future smart grid. A single-phase semi-fast electric vehicle battery charger is proposed in this paper. This ac on-board charging equipment can operate in grid-to-vehicle (G2V) mode, and also in vehicle-to-grid (V2G) mode, transferring the battery energy to the grid when the vehicle is parked. The charger is controlled with a Perfect Harmonic Cancellation (PHC) strategy, contributing to improve the grid power quality, since the current demanded or injected has no harmonic content and a high power factor. Hall-effect current and voltage transducers have been used in the sensor stage to carry out this control strategy. Experimental results with a laboratory prototype are presented. PMID:22163697

  1. 46 CFR 164.019-13 - Production quality control requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Production quality control requirements. 164.019-13....019-13 Production quality control requirements. (a) General. Each component manufacturer shall establish procedures for maintaining quality control of the materials used in production, manufacturing...

  2. 46 CFR 164.019-13 - Production quality control requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 6 2012-10-01 2012-10-01 false Production quality control requirements. 164.019-13....019-13 Production quality control requirements. (a) General. Each component manufacturer shall establish procedures for maintaining quality control of the materials used in production, manufacturing...

  3. 46 CFR 164.019-13 - Production quality control requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Production quality control requirements. 164.019-13....019-13 Production quality control requirements. (a) General. Each component manufacturer shall establish procedures for maintaining quality control of the materials used in production, manufacturing...

  4. 46 CFR 164.019-13 - Production quality control requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 6 2014-10-01 2014-10-01 false Production quality control requirements. 164.019-13....019-13 Production quality control requirements. (a) General. Each component manufacturer shall establish procedures for maintaining quality control of the materials used in production, manufacturing...

  5. 46 CFR 164.019-13 - Production quality control requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 6 2013-10-01 2013-10-01 false Production quality control requirements. 164.019-13....019-13 Production quality control requirements. (a) General. Each component manufacturer shall establish procedures for maintaining quality control of the materials used in production, manufacturing...

  6. Catalytic copyrolysis of particle board and polypropylene over Al-MCM-48

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kim, Hannah; Choi, Suek Ju; Kim, Ji Man

    Highlights: • Al-MCM-48 was used for catalytic copyrolysis of particle board and polypropylene. • Catalytic produced mainly hydrocarbons. • The hydrocarbons produced were mainly in the diesel range. - Abstract: Particle board and polypropylene (PP) at a mixing ratio of 1:1 were copyrolyzed over two Al-MCM-48 catalysts with Si/Al ratios of 20 and 80. The catalyst characteristics were examined by measuring the Brunauer-Emmett-Teller surface area, temperature programmed desorption of ammonia, and X-ray diffraction. The main pyrolysis products of particle board were oxygenates, acids, and phenolics, whereas a large quantity of hydrocarbons within the diesel fuel range was produced from copyrolysismore » with polypropylene. The catalytic copyrolysis of particle board and PP over the Al-MCM-48 catalysts produced bio-oil with a much larger hydrocarbon content than that from the catalytic pyrolysis of particle board only. The hydrocarbons produced were mainly in the diesel range, highlighting the potential for the production of high-quality fuel.« less

  7. Calibration of medium-resolution monochrome cathode ray tube displays for the purpose of board examinations.

    PubMed

    Evanoff, M G; Roehrig, H; Giffords, R S; Capp, M P; Rovinelli, R J; Hartmann, W H; Merritt, C

    2001-06-01

    This report discusses calibration and set-up procedures for medium-resolution monochrome cathode ray tubes (CRTs) taken in preparation of the oral portion of the board examination of the American Board of Radiology (ABR). The board examinations took place in more than 100 rooms of a hotel. There was one display-station (a computer and the associated CRT display) in each of the hotel rooms used for the examinations. The examinations covered the radiologic specialties cardiopulmonary, musculoskeletal, gastrointestinal, vascular, pediatric, and genitourinary. The software used for set-up and calibration was the VeriLUM 4.0 package from Image Smiths in Germantown, MD. The set-up included setting minimum luminance and maximum luminance, as well as positioning of the CRT in each examination room with respect to reflections of roomlights. The calibration for the grey scale rendition was done meeting the Digital Imaging and communication in Medicine (DICOM) 14 Standard Display Function. We describe these procedures, and present the calibration data in. tables and graphs, listing initial values of minimum luminance, maximum luminance, and grey scale rendition (DICOM 14 standard display function). Changes of these parameters over the duration of the examination were observed and recorded on 11 monitors in a particular room. These changes strongly suggest that all calibrated CRTs be monitored over the duration of the examination. In addition, other CRT performance data affecting image quality such as spatial resolution should be included in set-up and image quality-control procedures.

  8. PACS quality control and automatic problem notifier

    NASA Astrophysics Data System (ADS)

    Honeyman-Buck, Janice C.; Jones, Douglas; Frost, Meryll M.; Staab, Edward V.

    1997-05-01

    One side effect of installing a clinical PACS Is that users become dependent upon the technology and in some cases it can be very difficult to revert back to a film based system if components fail. The nature of system failures range from slow deterioration of function as seen in the loss of monitor luminance through sudden catastrophic loss of the entire PACS networks. This paper describes the quality control procedures in place at the University of Florida and the automatic notification system that alerts PACS personnel when a failure has happened or is anticipated. The goal is to recover from a failure with a minimum of downtime and no data loss. Routine quality control is practiced on all aspects of PACS, from acquisition, through network routing, through display, and including archiving. Whenever possible, the system components perform self and between platform checks for active processes, file system status, errors in log files, and system uptime. When an error is detected or a exception occurs, an automatic page is sent to a pager with a diagnostic code. Documentation on each code, trouble shooting procedures, and repairs are kept on an intranet server accessible only to people involved in maintaining the PACS. In addition to the automatic paging system for error conditions, acquisition is assured by an automatic fax report sent on a daily basis to all technologists acquiring PACS images to be used as a cross check that all studies are archived prior to being removed from the acquisition systems. Daily quality control is preformed to assure that studies can be moved from each acquisition and contrast adjustment. The results of selected quality control reports will be presented. The intranet documentation server will be described with the automatic pager system. Monitor quality control reports will be described and the cost of quality control will be quantified. As PACS is accepted as a clinical tool, the same standards of quality control must be established

  9. Circuit board routing attachment for Fermilab Gerber plotter

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lindenmeyer, C.

    1984-05-10

    A new and potentially important method of producing large circuit boards has been developed at Fermilab. A Gerber Flat Bed Plotter with an active area of 5' x 16' has been fitted with a machining head to produce a circuit board without the use of photography or chemicals. The modifications of the Gerber Plotter do not impair its use as a photoplotter or pen plotter, the machining head is merely exchanged with the standard attachments. The modifications to the program are minimal; this will be described in another report. The machining head is fitted with an air bearing motorized spindlemore » driven at a speed of 40,000 rpm to 90,000 rpm. The spindle also is provided with air bearings on its outside diameter, offering frictionless vertical travel guidance. Vertical travel of the spindle is driven by a spring return single acting air cylinder. An adjustable hydraulic damper slows the spindle travel near the end of its downward stroke. Two programmable stops control spindle down stroke position, and limit switches are provided for position feedback to the control system. A vacuum system collects chips at the cutter head. No lubrication or regular maintenance is required. The circuit board to be fabricated is supported on a porous plastic mat which allows table vacuum to hold the board in place while allowing the cutters or drills to cut through the board without damaging the rubber platen of the plotter. The perimeter of the board must be covered to the limits of the table vacuum area used to prevent excessive leakage.« less

  10. [Balance trainability using the Nintendo Wii balance board in sportive people].

    PubMed

    Paukowits, S; Stöggl, T

    2014-03-01

    A multivariable training has a positive impact on balance skills and risk of injury. To date the effect of this training using the Nintendo Wii balance board in sportive people has not yet been investigated. The aim of this study was to investigate whether training with the Nintendo Wii balance board can improve balance skills. 20 people were randomized into a control and an intervention group each with 10 people who performed a unilateral stance test with eyes open and closed as well as the star excursion balance test before and after the intervention. The control group completed their usual sports and the intervention group an adjunct training with the Nintendo Wii balance board for 4 weeks. Adjunct Training using the Nintendo Wii Balance Board did not improve sportive people's balance skills significantly. The intervention group, however, attained better results in the star excursion balance test, whereas the control group did not show any changes. The unilateral stance tests did not provide significant differences before and after training within both groups. The use of the Nintendo Wii balance board should be further investigated by employing individual difficulty levels. © Georg Thieme Verlag KG Stuttgart · New York.

  11. Quality by control: Towards model predictive control of mammalian cell culture bioprocesses.

    PubMed

    Sommeregger, Wolfgang; Sissolak, Bernhard; Kandra, Kulwant; von Stosch, Moritz; Mayer, Martin; Striedner, Gerald

    2017-07-01

    The industrial production of complex biopharmaceuticals using recombinant mammalian cell lines is still mainly built on a quality by testing approach, which is represented by fixed process conditions and extensive testing of the end-product. In 2004 the FDA launched the process analytical technology initiative, aiming to guide the industry towards advanced process monitoring and better understanding of how critical process parameters affect the critical quality attributes. Implementation of process analytical technology into the bio-production process enables moving from the quality by testing to a more flexible quality by design approach. The application of advanced sensor systems in combination with mathematical modelling techniques offers enhanced process understanding, allows on-line prediction of critical quality attributes and subsequently real-time product quality control. In this review opportunities and unsolved issues on the road to a successful quality by design and dynamic control implementation are discussed. A major focus is directed on the preconditions for the application of model predictive control for mammalian cell culture bioprocesses. Design of experiments providing information about the process dynamics upon parameter change, dynamic process models, on-line process state predictions and powerful software environments seem to be a prerequisite for quality by control realization. © 2017 The Authors. Biotechnology Journal published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. A study on the real-time reliability of on-board equipment of train control system

    NASA Astrophysics Data System (ADS)

    Zhang, Yong; Li, Shiwei

    2018-05-01

    Real-time reliability evaluation is conducive to establishing a condition based maintenance system for the purpose of guaranteeing continuous train operation. According to the inherent characteristics of the on-board equipment, the connotation of reliability evaluation of on-board equipment is defined and the evaluation index of real-time reliability is provided in this paper. From the perspective of methodology and practical application, the real-time reliability of the on-board equipment is discussed in detail, and the method of evaluating the realtime reliability of on-board equipment at component level based on Hidden Markov Model (HMM) is proposed. In this method the performance degradation data is used directly to realize the accurate perception of the hidden state transition process of on-board equipment, which can achieve a better description of the real-time reliability of the equipment.

  13. The Role of County Surveyors and County Drainage Boards in Addressing Water Quality.

    PubMed

    Dunn, Mike; Mullendore, Nathan; de Jalon, Silvestre Garcia; Prokopy, Linda Stalker

    2016-06-01

    Water quality problems stemming from the Midwestern U.S. agricultural landscape have been widely recognized and documented. The Midwestern state of Indiana contains tens of thousands of miles of regulated drains that represent biotic communities that comprise the headwaters of the state's many rivers and creeks. Traditional management, however, reduces these waterways to their most basic function as conveyances, ignoring their role in the ecosystem as hosts for biotic and abiotic processes that actively regulate the fate and transport of nutrients and farm chemicals. Novel techniques and practices such as the two-stage ditch, denitrifying bioreactor, and constructed wetlands represent promising alternatives to traditional management approaches, yet many of these tools remain underutilized. To date, conservation efforts and research have focused on increasing the voluntary adoption of practices among agricultural producers. Comparatively little attention has been paid to the roles of the drainage professionals responsible for the management of waterways and regulated drains. To address this gap, we draw on survey responses from 39 county surveyors and 85 drainage board members operating in Indiana. By examining the backgrounds, attitudes, and actions of these individuals, we consider their role in advocating and implementing novel conservation practices.

  14. Analytical approaches to quality assurance and quality control in rangeland monitoring data

    USDA-ARS?s Scientific Manuscript database

    Producing quality data to support land management decisions is the goal of every rangeland monitoring program. However, the results of quality assurance (QA) and quality control (QC) efforts to improve data quality are rarely reported. The purpose of QA and QC is to prevent and describe non-sampling...

  15. Professional Development for Water Quality Control Personnel.

    ERIC Educational Resources Information Center

    Shepard, Clinton Lewis

    This study investigated the availability of professional development opportunities for water quality control personnel in the midwest. The major objective of the study was to establish a listing of educational opportunities for the professional development of water quality control personnel and to compare these with the opportunities technicians…

  16. Enabling people with developmental disabilities to actively follow simple instructions and perform designated physical activities according to simple instructions with Nintendo Wii Balance Boards by controlling environmental stimulation.

    PubMed

    Shih, Ching-Hsiang; Chung, Chiao-Chen; Shih, Ching-Tien; Chen, Ling-Che

    2011-01-01

    The latest researches have adopted software technology turning the Nintendo Wii Balance Board into a high performance standing location detector. This study extended Wii Balance Board functionality to assess whether two people with developmental disabilities would be able to actively perform designated physical activities according to simple instructions by controlling their favorite environmental stimulation using Nintendo Wii Balance Boards. This study was carried out according to an A-B-A-B design. Data showed that both participants significantly increased their target response (performing a designated physical activity) by activating the control system to produce their preferred environmental stimulation during the intervention phases. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. Hospital ownership, decisions on supervisory board characteristics, and financial performance.

    PubMed

    Kuntz, Ludwig; Pulm, Jannis; Wittland, Michael

    2016-01-01

    Dynamic and complex transformations in the hospital market increase the relevance of good corporate governance. However, hospital performance and the characteristics of supervisory boards differ depending on ownership. The question therefore arises whether hospital owners can influence performance by addressing supervisory board characteristics. The objective of this study is to explain differences in the financial performance of hospitals with regard to ownership by studying the size and composition of supervisory boards. The AMADEUS database was used to collect information on hospital financial performance in 2009 and 2010. Business and quality reports, hospital websites, and data from health insurer were used to obtain information on hospital and board characteristics. The resulting sample consisted of 175 German hospital corporations. We utilized ANOVA and regression analysis to test a mediation hypothesis that investigated whether decisions regarding board size and composition were associated with financial performance and could explain performance differences. Financial performance and board size and composition depend on ownership. An increase in board size and greater politician participation were negatively associated with all five tested measures of financial performance. Furthermore, an increase in physician participation was positively associated with one dimension of financial performance, whereas one negative relationship was identified for nurse and economist participation. For clerics, no associations were found. Decisions concerning board size and composition are important as they relate to hospital financial performance. We contribute to existing research by showing that, in addition to board size and physician participation, the participation of other professionals can also influence financial performance.

  18. Design and Development of Multi-Transceiver Lorafi Board consisting LoRa and ESP8266-Wifi Communication Module

    NASA Astrophysics Data System (ADS)

    Azmi, Noraini; Sudin, Sukhairi; Munirah Kamarudin, Latifah; Zakaria, Ammar; Visvanathan, Retnam; Chew Cheik, Goh; Mamduh Syed Zakaria, Syed Muhammad; Abdullah Alfarhan, Khudhur; Badlishah Ahmad, R.

    2018-03-01

    The advancement of Micro-Electro-Mechanical-Systems (MEMS), microcontroller technologies and the idea of Internet of Things (IoT) motivates the development of wireless modules (e.g. WiFi, Bluetooth, Zigbee, and LoRa) that are small and affordable. This paper aims to provide detailed information on the development of the LoRaFi board. The LoRaFi 1.0 is a multi-protocol communication board developed by Centre of Excellence for Advanced Sensor Technology (CEASTech). The board was developed for but not limited to monitor the indoor air quality. The board comprises two different wireless communication modules namely, Long-range technology (LoRa) and WiFi (using ESP8266). The board can be configured to communicate either using LoRa or WiFi or both. The board has been tested and the wireless communication operates successfully. Apart from LoRa, WiFi enables data to be forwarded to the cloud/server where the data can be stored for further data analysis. This helps provide users with real-time information on their smartphones or other applications. In the future, researchers will conduct tests to investigate the communication link quality. Newer version with reduced board size and additional wireless communication module will be developed in the future as to increase board flexibility and widen the range of applications that can use the board.

  19. Evaluation of telerobotic systems using an instrumented task board

    NASA Technical Reports Server (NTRS)

    Carroll, John D.; Gierow, Paul A.; Bryan, Thomas C.

    1991-01-01

    An instrumented task board was developed at NASA Marshall Space Flight Center (MSFC). An overview of the task board design, and current development status is presented. The task board was originally developed to evaluate operator performance using the Protoflight Manipulator Arm (PFMA) at MSFC. The task board evaluates tasks for Orbital Replacement Unit (ORU), fluid connect and transfers, electrical connect/disconnect, bolt running, and other basic tasks. The instrumented task board measures the 3-D forces and torques placed on the board, determines the robot arm's 3-D position relative to the task board using IR optics, and provides the information in real-time. The PFMA joint input signals can also be measured from a breakout box to evaluate the sensitivity or response of the arm operation to control commands. The data processing system provides the capability for post processing of time-history graphics and plots of the PFMA positions, the operator's actions, and the PFMA servo reactions in addition to real-time force/torque data presentation. The instrumented task board's most promising use is developing benchmarks for NASA centers for comparison and evaluation of telerobotic performance.

  20. Special report on transboundary air quality issues

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1998-12-31

    The International Air Quality Board was created in 1996 to provide advice to the International Joint Commission in fulfilling an air quality alerting function requested by governments in that year. The Board undertook a review of the many issues affecting transboundary air quality along the Canada-US border. This report reflects on issues previously addressed by the Board in its reporting to the Commission. Section 1 discusses the need for Canada and the US to adopt a seamless border approach to address pollution sources and receptors in a holistic manner. Section 2 discusses nitrogen oxides as a key contaminant because ofmore » its direct impact on the ecosystem and its effects on future levels of other secondary pollutants. Section 3 outlines the deficiencies of emission inventories regarding persistent toxic substances such as mercury, which must be addressed if source-to-receptor relationships are to be established. Section 4 covers the need to develop monitoring and modelling tools to further examine pollutant transport and concentration, and the resulting human and ecological exposure. Section 5 describes issues in individual regions along the border. Section 6 is directed at the harmonization of standards, which would assist in the effective control of transboundary pollutants such as ozone. Section 7 discusses collaboration with other organizations in addressing transboundary air pollution issues. Section 8 describes various feedback mechanisms for verifying that the elimination or management of air pollution is achieving improvement and benefits. Section 9 considers emissions and preventive strategies for major source sectors, including coal-fired utilities and mobile sources. The final section outlines future Board activities.« less

  1. Hospital board effectiveness: relationships between board training and hospital financial viability.

    PubMed

    Molinari, C; Morlock, L; Alexander, J; Lyles, C A

    1992-01-01

    This study examined whether hospital governing boards that invest in board education and training are more informed and effective decision-making bodies. Measures of hospital financial viability (i.e., selected financial ratios and outcomes) are used as indicators of hospital board effectiveness. Board participation in educational programs was significantly associated with improved profitability, liquidity, and occupancy levels, suggesting that investment in the education of directors is likely to enhance hospital viability and thus increase board effectiveness.

  2. Ride quality sensitivity to SAS control law and to handling quality variations

    NASA Technical Reports Server (NTRS)

    Roberts, P. A.; Schmidt, D. K.; Swaim, R. L.

    1976-01-01

    The RQ trends which large flexible aircraft exhibit under various parameterizations of control laws and handling qualities are discussed. A summary of the assumptions and solution technique, a control law parameterization review, a discussion of ride sensitivity to handling qualities, and the RQ effects generated by implementing relaxed static stability configurations are included.

  3. 14 CFR 21.147 - Changes in quality control system.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Changes in quality control system. 21.147 Section 21.147 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... quality control system. After the issue of a production certificate, each change to the quality control...

  4. 14 CFR 21.147 - Changes in quality control system.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Changes in quality control system. 21.147 Section 21.147 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... quality control system. After the issue of a production certificate, each change to the quality control...

  5. 21 CFR 111.117 - What quality control operations are required for equipment, instruments, and controls?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What quality control operations are required for equipment, instruments, and controls? 111.117 Section 111.117 Food and Drugs FOOD AND DRUG ADMINISTRATION... and Process Control System: Requirements for Quality Control § 111.117 What quality control operations...

  6. A New Standing Posture Detector to Enable People with Multiple Disabilities to Control Environmental Stimulation by Changing Their Standing Posture through a Commercial Wii Balance Board

    ERIC Educational Resources Information Center

    Shih, Ching-Hsiang; Shih, Ching-Tien; Chiang, Ming-Shan

    2010-01-01

    This study assessed whether two persons with multiple disabilities would be able to control environmental stimulation using body swing (changing standing posture) and a Wii Balance Board with a newly developed standing posture detection program (i.e. a new software program turns a Wii Balance Board into a precise standing posture detector). The…

  7. Water Science and Technology Board annual report 1987

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1988-01-01

    In 1982, the National Research Council chose to recognize the importance of water resource issues by establishing the Water Science and Technology Board (WSTB). During the five years since its first meeting in November 1982, the WSTB has grown and matured. The WSTB has met 14 times to provide guidance and plan activities. Under the WSTB's direction, committees of experts have conducted approximately 30 studies on a broad array of topics, from dam safety to irrigation-induced water quality problems to ground water protection strategies. Studies have ranged in scope from the oversight of specific agency projects and programs to broadermore » scientific reviews, such as a disciplinary assessment of the hydrologic sciences initiated in 1987. In all cases, studies have the general theme of ultimately improving the scientific and technological bases of programs of water management and environmental quality. This fifth annual report of the WSTB summarizes the Board's accomplishments during 1987, its current activities, and its plans for the future. The report also includes information on Board and committee memberships, program organizations, and the reports produced. The report should provide the reader with a basic understanding of the WSTB's interests, achievements, and capabilities. The WSTB welcomes inquiries and suggestions concerning its activities and will provide more detailed information on any aspects of its work to those interested.« less

  8. Colorado Air Quality Control Regulations and Ambient Air Quality Standards.

    ERIC Educational Resources Information Center

    Colorado State Dept. of Health, Denver. Div. of Air Pollution Control.

    Regulations and standards relative to air quality control in Colorado are defined in this publication. Presented first are definitions of terms, a statement of intent, and general provisions applicable to all emission control regulations adopted by the Colorado Air Pollution Control Commission. Following this, three regulations are enumerated: (1)…

  9. 46 CFR 164.120-11 - Production quality control requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 6 2014-10-01 2014-10-01 false Production quality control requirements. 164.120-11... Rescue Boats § 164.120-11 Production quality control requirements. The resin manufacturer must institute a quality control procedure to ensure that all Coast Guard-accepted resin is produced to the same...

  10. 46 CFR 164.120-11 - Production quality control requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 6 2012-10-01 2012-10-01 false Production quality control requirements. 164.120-11... Rescue Boats § 164.120-11 Production quality control requirements. The resin manufacturer must institute a quality control procedure to ensure that all Coast Guard-accepted resin is produced to the same...

  11. 46 CFR 164.120-11 - Production quality control requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 6 2013-10-01 2013-10-01 false Production quality control requirements. 164.120-11... Rescue Boats § 164.120-11 Production quality control requirements. The resin manufacturer must institute a quality control procedure to ensure that all Coast Guard-accepted resin is produced to the same...

  12. Quality Control Technician Curriculum. An Elusive Butterfly.

    ERIC Educational Resources Information Center

    Holler, Michael

    Defining and developing a quality control technician curriculum for an associate degree program is a difficult and puzzling job. There are as many definitions of quality control and curriculum ideas as there are educators asked. However, one could start by dividing the field into its major areas--heavy manufacturing, maintenance, research, and…

  13. Illustrative Bylaws for Public College and University Governing Boards. Board Basics

    ERIC Educational Resources Information Center

    Ingram, Tom; Johnson, Neal

    2005-01-01

    Bylaws constitute one of the most important legal documents in the portfolio of a public college or university board. They articulate the board?s responsibilities and establish the "rules" by which the board organizes itself to do its work. Bylaws begin where a public institution's statutes or constitutional provisions leave off. They build on…

  14. A multiple objective optimization approach to quality control

    NASA Technical Reports Server (NTRS)

    Seaman, Christopher Michael

    1991-01-01

    The use of product quality as the performance criteria for manufacturing system control is explored. The goal in manufacturing, for economic reasons, is to optimize product quality. The problem is that since quality is a rather nebulous product characteristic, there is seldom an analytic function that can be used as a measure. Therefore standard control approaches, such as optimal control, cannot readily be applied. A second problem with optimizing product quality is that it is typically measured along many dimensions: there are many apsects of quality which must be optimized simultaneously. Very often these different aspects are incommensurate and competing. The concept of optimality must now include accepting tradeoffs among the different quality characteristics. These problems are addressed using multiple objective optimization. It is shown that the quality control problem can be defined as a multiple objective optimization problem. A controller structure is defined using this as the basis. Then, an algorithm is presented which can be used by an operator to interactively find the best operating point. Essentially, the algorithm uses process data to provide the operator with two pieces of information: (1) if it is possible to simultaneously improve all quality criteria, then determine what changes to the process input or controller parameters should be made to do this; and (2) if it is not possible to improve all criteria, and the current operating point is not a desirable one, select a criteria in which a tradeoff should be made, and make input changes to improve all other criteria. The process is not operating at an optimal point in any sense if no tradeoff has to be made to move to a new operating point. This algorithm ensures that operating points are optimal in some sense and provides the operator with information about tradeoffs when seeking the best operating point. The multiobjective algorithm was implemented in two different injection molding scenarios

  15. A Regulation for the Control of Atmospheric Pollution, Amended Version.

    ERIC Educational Resources Information Center

    Puerto Rico Environmental Quality Board, San Juan.

    Nine articles, related to the preservation of the natural quality of the air, and to prevention, elimination and control of atmospheric pollution in the Commonwealth of Puerto Rico, are contained in this document. These articles were written and enacted by the Environmental Quality Board in accordance with Law No. 9, approved June 18, 1970 -…

  16. 7 CFR 58.523 - Laboratory and quality control tests.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Laboratory and quality control tests. 58.523 Section... Service 1 Operations and Operating Procedures § 58.523 Laboratory and quality control tests. (a) Quality control tests shall be made on samples as often as necessary to determine the shelf-life and stability of...

  17. 7 CFR 58.523 - Laboratory and quality control tests.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Laboratory and quality control tests. 58.523 Section... Service 1 Operations and Operating Procedures § 58.523 Laboratory and quality control tests. (a) Quality control tests shall be made on samples as often as necessary to determine the shelf-life and stability of...

  18. 7 CFR 58.523 - Laboratory and quality control tests.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Laboratory and quality control tests. 58.523 Section... Service 1 Operations and Operating Procedures § 58.523 Laboratory and quality control tests. (a) Quality control tests shall be made on samples as often as necessary to determine the shelf-life and stability of...

  19. 7 CFR 58.523 - Laboratory and quality control tests.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Laboratory and quality control tests. 58.523 Section... Service 1 Operations and Operating Procedures § 58.523 Laboratory and quality control tests. (a) Quality control tests shall be made on samples as often as necessary to determine the shelf-life and stability of...

  20. 7 CFR 58.523 - Laboratory and quality control tests.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Laboratory and quality control tests. 58.523 Section... Service 1 Operations and Operating Procedures § 58.523 Laboratory and quality control tests. (a) Quality control tests shall be made on samples as often as necessary to determine the shelf-life and stability of...

  1. 21 CFR 640.56 - Quality control test for potency.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... quality control test for potency may be performed by a clinical laboratory which meets the standards of... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Quality control test for potency. 640.56 Section...) BIOLOGICS ADDITIONAL STANDARDS FOR HUMAN BLOOD AND BLOOD PRODUCTS Cryoprecipitate § 640.56 Quality control...

  2. Web quality control for lectures: Supercourse and Amazon.com.

    PubMed

    Linkov, Faina; LaPorte, Ronald; Lovalekar, Mita; Dodani, Sunita

    2005-12-01

    Peer review has been at the corner stone of quality control of the biomedical journals in the past 300 years. With the emergency of the Internet, new models of quality control and peer review are emerging. However, such models are poorly investigated. We would argue that the popular system of quality control used in Amazon.com offers a way to ensure continuous quality improvement in the area of research communications on the Internet. Such system is providing an interesting alternative to the traditional peer review approaches used in the biomedical journals and challenges the traditional paradigms of scientific publishing. This idea is being explored in the context of Supercourse, a library of 2,350 prevention lectures, shared for free by faculty members from over 150 countries. Supercourse is successfully utilizing quality control approaches that are similar to Amazon.com model. Clearly, the existing approaches and emerging alternatives for quality control in scientific communications needs to be assessed scientifically. Rapid explosion of internet technologies could be leveraged to produce better, more cost effective systems for quality control in the biomedical publications and across all sciences.

  3. 40 CFR 81.107 - Greenwood Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Regions § 81.107 Greenwood Intrastate Air Quality Control Region. The Greenwood Intrastate Air Quality Control Region (South Carolina) consists of the territorial area encompassed by the... 40 Protection of Environment 17 2010-07-01 2010-07-01 false Greenwood Intrastate Air Quality...

  4. 40 CFR 81.108 - Columbia Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Regions § 81.108 Columbia Intrastate Air Quality Control Region. The Columbia Intrastate Air Quality Control Region (South Carolina) consists of the territorial area encompassed by the... 40 Protection of Environment 17 2011-07-01 2011-07-01 false Columbia Intrastate Air Quality...

  5. 40 CFR 81.108 - Columbia Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Regions § 81.108 Columbia Intrastate Air Quality Control Region. The Columbia Intrastate Air Quality Control Region (South Carolina) consists of the territorial area encompassed by the... 40 Protection of Environment 17 2010-07-01 2010-07-01 false Columbia Intrastate Air Quality...

  6. 40 CFR 81.111 - Georgetown Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Regions § 81.111 Georgetown Intrastate Air Quality Control Region. The Georgetown Intrastate Air Quality Control Region (South Carolina) consists of the territorial area encompassed by the... 40 Protection of Environment 17 2011-07-01 2011-07-01 false Georgetown Intrastate Air Quality...

  7. 40 CFR 81.109 - Florence Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Regions § 81.109 Florence Intrastate Air Quality Control Region. The Florence Intrastate Air Quality Control Region (South Carolina) consists of the territorial area encompassed by the... 40 Protection of Environment 17 2010-07-01 2010-07-01 false Florence Intrastate Air Quality...

  8. 40 CFR 81.111 - Georgetown Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Regions § 81.111 Georgetown Intrastate Air Quality Control Region. The Georgetown Intrastate Air Quality Control Region (South Carolina) consists of the territorial area encompassed by the... 40 Protection of Environment 17 2010-07-01 2010-07-01 false Georgetown Intrastate Air Quality...

  9. 40 CFR 81.109 - Florence Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Regions § 81.109 Florence Intrastate Air Quality Control Region. The Florence Intrastate Air Quality Control Region (South Carolina) consists of the territorial area encompassed by the... 40 Protection of Environment 17 2011-07-01 2011-07-01 false Florence Intrastate Air Quality...

  10. 40 CFR 81.107 - Greenwood Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Regions § 81.107 Greenwood Intrastate Air Quality Control Region. The Greenwood Intrastate Air Quality Control Region (South Carolina) consists of the territorial area encompassed by the... 40 Protection of Environment 17 2011-07-01 2011-07-01 false Greenwood Intrastate Air Quality...

  11. Information technology and the board of directors.

    PubMed

    Nolan, Richard; McFarlan, F Warren

    2005-10-01

    Ever since the Y2K scare, boards have grown increasingly nervous about corporate dependence on information technology. Since then, computer crashes, denial of service attacks, competitive pressures, and the need to automate compliance with government regulations have heightened board sensitivity to IT risk. Unfortunately, most boards remain largely in the dark when it comes to IT spending and strategy, despite the fact that corporate information assets can account for more than 50% of capital spending. A lack of board oversight for IT activities is dangerous, the authors say. It puts firms at risk in the same way that failing to audit their books would. Companies that have established board-level IT governance committees are better able to control IT project costs and carve out competitive advantage. But there is no one-size-fits-all model for board supervision of a company's IT operations. The correct approach depends on what strategic "mode" a company is in whether its operations are extremely dependent on IT or not, and whether or not it relies heavily on keeping up with the latest technologies. This article spells out the conditions under which boards need to change their level of involvement in IT decisions, explaining how members can recognize their firms' IT risks and decide whether they should pursue more aggressive IT governance. The authors delineate what an IT governance committee should look like in terms of charter, membership, duties, and overall agenda. They also offer recommendations for developing IT policies that take into account an organization's operational and strategic needs and suggest what to do when those needs change. Given the dizzying pace of change in the world of IT, boards can't afford to ignore the state of their IT systems and capabilities. Appropriate board governance can go a long way toward helping a company avoid unnecessary risk and improve its competitive position.

  12. The Relationship between Social Capital and Quality Management Systems in European Hospitals: A Quantitative Study

    PubMed Central

    Hammer, Antje; Arah, Onyebuchi A.; DerSarkissian, Maral; Thompson, Caroline A.; Mannion, Russell; Wagner, Cordula; Ommen, Oliver; Sunol, Rosa; Pfaff, Holger

    2013-01-01

    Background Strategic leadership is an important organizational capability and is essential for quality improvement in hospital settings. Furthermore, the quality of leadership depends crucially on a common set of shared values and mutual trust between hospital management board members. According to the concept of social capital, these are essential requirements for successful cooperation and coordination within groups. Objectives We assume that social capital within hospital management boards is an important factor in the development of effective organizational systems for overseeing health care quality. We hypothesized that the degree of social capital within the hospital management board is associated with the effectiveness and maturity of the quality management system in European hospitals. Methods We used a mixed-method approach to data collection and measurement in 188 hospitals in 7 European countries. For this analysis, we used responses from hospital managers. To test our hypothesis, we conducted a multilevel linear regression analysis of the association between social capital and the quality management system score at the hospital level, controlling for hospital ownership, teaching status, number of beds, number of board members, organizational culture, and country clustering. Results The average social capital score within a hospital management board was 3.3 (standard deviation: 0.5; range: 1-4) and the average hospital score for the quality management index was 19.2 (standard deviation: 4.5; range: 0-27). Higher social capital was associated with higher quality management system scores (regression coefficient: 1.41; standard error: 0.64, p=0.029). Conclusion The results suggest that a higher degree of social capital exists in hospitals that exhibit higher maturity in their quality management systems. Although uncontrolled confounding and reverse causation cannot be completely ruled out, our new findings, along with the results of previous research, could

  13. Contractor Performed Quality Control on KyTC Projects.

    DOT National Transportation Integrated Search

    2002-08-01

    This report addresses issues related to transferring the responsibility for quality control from the Kentucky Transportation Cabinet (KyTC) to construction contractors. : Several key topics related to Contractor Performed Quality Control (CPQC) are p...

  14. Autonomous exercise game use improves metabolic control and quality of life in type 2 diabetes patients - a randomized controlled trial.

    PubMed

    Kempf, Kerstin; Martin, Stephan

    2013-12-10

    Lifestyle intervention in type 2 diabetes mellitus (T2DM) is effective but needs a special local setting and is costly. Therefore, in a randomized-controlled trial we tested the hypothesis that the autonomous use of the interactive exercise game Wii Fit Plus over a period of 12 weeks improves metabolic control, with HbA1c reduction as the primary outcome, and weight loss, reduction of cardiometabolic risk factors, physical activity and quality of life (secondary outcomes) in T2DM patients. Participants (n = 220) were randomized into an intervention and a control group. The intervention group was provided with a Wii console, a balance board and the exercise game Wii Fit Plus for 12 weeks. The control group remained under routine care and received the items 12 weeks later. At baseline and after 12 weeks (and for the control group additionally after 12 weeks of intervention) the participants' health parameters, medication, physical activity and validated questionnaires for quality of life (PAID, SF12, WHO-5, CES-D) were requested and compared in a complete case analysis using the Mann-Whitney test and the Wilcoxon signed rank test. 80% of participants completed the 12-week study. Patients in the intervention group significantly improved HbA1c (from 7.1 ± 1.3% to 6.8 ± 0.9%; -0.3 ± 1.1%; p = 0.0002) in comparison to the control group (from 6.8 ± 0.9% to 6.7 ± 0.7%; -0.1 ± 0.5%) and also significantly reduced fasting blood glucose (from 135.8 ± 38.9 mg/dl to 126.6 ± 36.6 mg/dl; p = 0.04), weight (from 97.6 ± 19.2 kg to 96.3 ± 18.7 kg; p < 0.001) and body mass index (from 34.1 ± 6.5 kg/m2 to 33.5 ± 6.5 kg/m2; p < 0.001). Daily physical activity increased significantly (p < 0.001). Diabetes-dependent impairment, mental health, subjective wellbeing and quality of life also improved significantly, and the number of patients with depression decreased. Similar improvements were seen

  15. [Pharmaceutical product quality control and good manufacturing practices].

    PubMed

    Hiyama, Yukio

    2010-01-01

    This report describes the roles of Good Manufacturing Practices (GMP) in pharmaceutical product quality control. There are three keys to pharmaceutical product quality control. They are specifications, thorough product characterization during development, and adherence to GMP as the ICH Q6A guideline on specifications provides the most important principles in its background section. Impacts of the revised Pharmaceutical Affairs Law (rPAL) which became effective in 2005 on product quality control are discussed. Progress of ICH discussion for Pharmaceutical Development (Q8), Quality Risk Management (Q9) and Pharmaceutical Quality System (Q10) are reviewed. In order to reconstruct GMP guidelines and GMP inspection system in the regulatory agencies under the new paradigm by rPAL and the ICH, a series of Health Science studies were conducted. For GMP guidelines, product GMP guideline, technology transfer guideline, laboratory control guideline and change control system guideline were written. For the GMP inspection system, inspection check list, inspection memo and inspection scenario were proposed also by the Health Science study groups. Because pharmaceutical products and their raw materials are manufactured and distributed internationally, collaborations with other national authorities are highly desired. In order to enhance the international collaborations, consistent establishment of GMP inspection quality system throughout Japan will be essential.

  16. Water quality: a factor in Arkansas River development

    USGS Publications Warehouse

    Dover, T.B.

    1957-01-01

    One of the first requisites for intelligent planning of the utilization and control of water and for the administration of laws relating to its use, is data on the quantity, quality, and mode of occurence of water supplies. The collections, evaluation, interpretation, and publication of such data constitute the primary function of the Water Resources Division of the United States Geological Survey. Since 1895 the Congress has made appropriations to this agency for investigations of the water resources of the Nation. In 1929 the Congress adopted the policy of dollar-for-dollar cooperation with State and local governmental agencies for water-resources investigations. The Geological Survey's Federal-State cooperative program of quality-of-water investigations in Oklahoma was started in 1944 in cooperation with the Oklahoma Planning and Resources Board. Since July of this year the program has been carried on cooperatively with the newly created Oklahoma Water Resources Board.

  17. Across the board: Gabriele Centi.

    PubMed

    Centi, Gabriele

    2015-01-01

    In this series of articles, the board members of ChemSusChem discuss recent research articles that they consider of exceptional quality and importance for sustainability. In this entry, Prof. Gabriele Centi comments on recent results on non-oxidative conversion of methane to ethylene and aromatics. The discussion takes into account technical, economical, and sustainability perspectives, and briefly comments on the role of shale gas in future chemical production scenarios. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. 21 CFR 862.1660 - Quality control material (assayed and unassayed).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Quality control material (assayed and unassayed... Test Systems § 862.1660 Quality control material (assayed and unassayed). (a) Identification. A quality... that may arise from reagent or analytical instrument variation. A quality control material (assayed and...

  19. QUALITY ASSURANCE AND QUALITY CONTROL FOR WASTE CONTAINMENT FACILITIES. Project Summary

    EPA Science Inventory

    It is generally agreed that both quality assurance (QA) and quality control (QC) are essential to the proper installation and eventual performance of environmentally safe and secure waste containment systems. Even further, there are both manufacturing and construction aspects to...

  20. Texas Water Quality Board Teachers Workshop Program.

    ERIC Educational Resources Information Center

    Texas Water Quality Board, Austin.

    These materials are designed for teachers participating in an inservice workshop on water quality. Included in the materials are a workshop agenda, a water awareness pretest, and the various parameters and tests that are used to determine and measure water quality. The parameters are discussed from the standpoint of their potential impact to…

  1. A conceptual ground-water-quality monitoring network for San Fernando Valley, California

    USGS Publications Warehouse

    Setmire, J.G.

    1985-01-01

    A conceptual groundwater-quality monitoring network was developed for San Fernando Valley to provide the California State Water Resources Control Board with an integrated, basinwide control system to monitor the quality of groundwater. The geology, occurrence and movement of groundwater, land use, background water quality, and potential sources of pollution were described and then considered in designing the conceptual monitoring network. The network was designed to monitor major known and potential point and nonpoint sources of groundwater contamination over time. The network is composed of 291 sites where wells are needed to define the groundwater quality. The ideal network includes four specific-purpose networks to monitor (1) ambient water quality, (2) nonpoint sources of pollution, (3) point sources of pollution, and (4) line sources of pollution. (USGS)

  2. Crisis prevention: how to gear up your board.

    PubMed

    Salmon, W J

    1993-01-01

    Today's critics of corporate boardrooms have plenty of ammunition. The two crucial responsibilities of boards-oversight of long-term company strategy and the selection, evaluation, and compensation of top management--were reduced to damage control during the 1980s. Walter Salmon, a longtime director, notes that while boards have improved since he began serving on them in 1961, they haven't kept pace with the need for real change. Based on over 30 years of boardroom experience, Salmon recommends against government reform of board practices. But he does prescribe a series of incremental changes as a remedy. To begin with, he suggests limiting the size of boards and increasing the number of outside directors on them. In fact, according to Salmon, only three insiders belong on a board: the CEO, the COO, and the CFO. Changing how committees function is also necessary for gearing up today's boards. The audit committee, for example, can periodically review "high-exposure areas" of a business, perhaps helping to prevent embarrassing drops in future profits. Compensation committees can structure incentive compensation for executives to emphasize long-term rather than short-term performance. And nominating committees should be responsible for finding new, independent directors--not the CEO. In general, boards as a whole must spot problems early and blow the whistle, exercising what Salmon calls, "constructive dissatisfaction." On a revitalized board, directors have enough confidence in the process to vigorously challenge one another, including the company's chief executive.

  3. Serving on Organizational Boards: What Nurses Need to Know

    PubMed

    Stalter, Ann M; Arms, Deborah

    2016-02-26

    If you have ever thought about serving on a board or being actively involved in meetings aimed at making policy decisions, but are not sure you have the knowledge, skills or abilities to serve competently, this article is for you! In this article, the authors describe six competencies needed by nurses who are serving on boards and/or policy committees so as to contribute in a productive manner. These competencies include a professional commitment to serving on a governing board; knowledge about board types, bylaws, and job descriptions; an understanding of standard business protocols, board member roles, and voting processes; a willingness to use principles for managing and leading effective and efficient board meetings; an appreciation for the ethical and legal processes for conducting meetings; and the ability to employ strategies for maintaining control during intense/uncivil situations. They also discuss strategies for demonstrating these competencies and describe personal responsibilities of board members. The authors conclude that a knowledge of these rules and standards is essential in order for nurses to assume leadership roles that will enhance the health of today’s and tomorrow’s societies.

  4. Development of an Experimental Board in the Nanaosatellite CUBESAT3

    NASA Astrophysics Data System (ADS)

    Cresciucci, Laetitia

    realize a satellite platform designed based on the following requirement: CUBESAT is a cube, its size is 10x10x10 centimeters, its weight must be under 1kg and the power consumption of the whole satellite is limited to 1 Watt. The University of Arizona makes such satellites. Each side of the cube is covered with solar panels which supply the power by recharging NiCad batteries. This satellite platform is provided with a power board, witch managed the power of the solar panels, the level of the batteries and the power needed by the others boards of the satellite. In addition to this power board, the CUBESAT platform includes a controller board. The controller used is the Microchip PIC 16C77. It acquires the data for the different sensors of the satellite (temperature, battery current level, power supplied by the solar panel) and manages the communication between the different boards. This communication uses a serial bus based on the I2C communication protocol. The last board on the CUBESAT platform is the transmission board. CUBESAT can be remote controlled by a ground station, and it have to send its data to this station periodically. The transmission board includes an emitter/receiver part designed by Motorola. The wavelength used for this transmission is the amature radio band, so anyone can listen to the satellite, but a key is necessary to decode the data. a non-expensive satellite which is very interesting for experimental missions. Alcatel Space Industries bought a CUBESAT to launch a radiation experiment in orbit, and turned to the Center of Micro-opto-electronics of Montpellier (CEM2) to define and realize this experience. I, Laetitia Cresciucci, and my partner, Didier Campillo, have been contacted by the CEM2 during our final year at the Engineers Science Institute of Montpellier (ISIM), in order to work on this project. The mission chosen for the CUBESAT's payload is to measure the degradation of three components in space. is a multi-goal mission. The

  5. [Post-marketing reevaluation for potential quality risk and quality control in clinical application of traditional Chinese medicines].

    PubMed

    Li, Hong-jiao; He, Li-yun; Liu, Bao-yan

    2015-06-01

    The effective quality control in clinical practices is an effective guarantee for the authenticity and scientificity of the findings. The post-marketing reevaluation for traditional Chinese medicines (TCM) focuses on the efficacy, adverse reaction, combined medication and effective dose of drugs in the market by expanded clinical trials, and requires a larger sample size and a wider range of patients. Therefore, this increases the difficulty of quality control in clinical practices. With the experience in quality control in clinical practices for the post-marketing reevaluation for Kangbingdu oral for cold, researchers in this study reviewed the study purpose, project, scheme design and clinical practice process from an overall point of view, analyzed the study characteristics of the post-marketing reevaluation for TCMs and the quality control risks, designed the quality control contents with quality impacting factors, defined key review contents and summarized the precautions in clinical practices, with the aim to improve the efficiency of quality control of clinical practices. This study can provide reference to clinical units and quality control-related personnel in the post-marketing reevaluation for TCMs.

  6. Multi-Agent Architecture with Support to Quality of Service and Quality of Control

    NASA Astrophysics Data System (ADS)

    Poza-Luján, Jose-Luis; Posadas-Yagüe, Juan-Luis; Simó-Ten, Jose-Enrique

    Multi Agent Systems (MAS) are one of the most suitable frameworks for the implementation of intelligent distributed control system. Agents provide suitable flexibility to give support to implied heterogeneity in cyber-physical systems. Quality of Service (QoS) and Quality of Control (QoC) parameters are commonly utilized to evaluate the efficiency of the communications and the control loop. Agents can use the quality measures to take a wide range of decisions, like suitable placement on the control node or to change the workload to save energy. This article describes the architecture of a multi agent system that provides support to QoS and QoC parameters to optimize de system. The architecture uses a Publish-Subscriber model, based on Data Distribution Service (DDS) to send the control messages. Due to the nature of the Publish-Subscribe model, the architecture is suitable to implement event-based control (EBC) systems. The architecture has been called FSACtrl.

  7. 40 CFR 81.87 - Metropolitan Boise Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.87 Section 81.87 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.87 Metropolitan Boise Intrastate Air Quality Control Region. The Metropolitan Boise Intrastate Air Quality Control Region (Idaho) consists of the territorial area encompassed...

  8. 40 CFR 81.89 - Metropolitan Cheyenne Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.89 Section 81.89 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.89 Metropolitan Cheyenne Intrastate Air Quality Control Region. The Metropolitan Cheyenne Intrastate Air Quality Control Region (Wyoming) consists of the territorial area...

  9. 40 CFR 81.101 - Metropolitan Dubuque Interstate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.101 Section 81.101 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.101 Metropolitan Dubuque Interstate Air Quality Control Region. The Metropolitan Dubuque Interstate Air Quality Control Region (Illinois-Iowa-Wisconsin) consists of the...

  10. 40 CFR 81.104 - Central Pennsylvania Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.104 Section 81.104 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.104 Central Pennsylvania Intrastate Air Quality Control Region. The Central Pennsylvania Intrastate Air Quality Control Region consists of the territorial area encompassed by...

  11. 40 CFR 81.106 - Greenville-Spartanburg Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.106 Section 81.106 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.106 Greenville-Spartanburg Intrastate Air Quality Control Region. The Greenville-Spartanburg Intrastate Air Quality Control Region (South Carolina) consists of the territorial...

  12. 40 CFR 81.120 - Middle Tennessee Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.120 Section 81.120 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.120 Middle Tennessee Intrastate Air Quality Control Region. The Middle Tennessee Intrastate Air Quality Control Region consists of the territorial area encompassed by...

  13. 40 CFR 81.75 - Metropolitan Charlotte Interstate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.75 Section 81.75 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.75 Metropolitan Charlotte Interstate Air Quality Control Region. The Metropolitan Charlotte Interstate Air Quality Control Region (North Carolina-South Carolina) has been revised...

  14. 40 CFR 81.79 - Northeastern Oklahoma Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.79 Section 81.79 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.79 Northeastern Oklahoma Intrastate Air Quality Control Region. The Metropolitan Tulsa Intrastate Air Quality Control Region has been renamed the Northeastern Oklahoma Intrastate...

  15. 40 CFR 81.119 - Western Tennessee Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.119 Section 81.119 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.119 Western Tennessee Intrastate Air Quality Control Region. The Western Tennessee Intrastate Air Quality Control Region consists of the territorial area encompassed by...

  16. 40 CFR 81.104 - Central Pennsylvania Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.104 Section 81.104 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.104 Central Pennsylvania Intrastate Air Quality Control Region. The Central Pennsylvania Intrastate Air Quality Control Region consists of the territorial area encompassed by...

  17. 40 CFR 81.87 - Metropolitan Boise Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.87 Section 81.87 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.87 Metropolitan Boise Intrastate Air Quality Control Region. The Metropolitan Boise Intrastate Air Quality Control Region (Idaho) consists of the territorial area encompassed...

  18. 40 CFR 81.79 - Northeastern Oklahoma Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.79 Section 81.79 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.79 Northeastern Oklahoma Intrastate Air Quality Control Region. The Metropolitan Tulsa Intrastate Air Quality Control Region has been renamed the Northeastern Oklahoma Intrastate...

  19. 40 CFR 81.101 - Metropolitan Dubuque Interstate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.101 Section 81.101 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.101 Metropolitan Dubuque Interstate Air Quality Control Region. The Metropolitan Dubuque Interstate Air Quality Control Region (Illinois-Iowa-Wisconsin) consists of the...

  20. 40 CFR 81.106 - Greenville-Spartanburg Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.106 Section 81.106 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.106 Greenville-Spartanburg Intrastate Air Quality Control Region. The Greenville-Spartanburg Intrastate Air Quality Control Region (South Carolina) consists of the territorial...

  1. 40 CFR 81.89 - Metropolitan Cheyenne Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.89 Section 81.89 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.89 Metropolitan Cheyenne Intrastate Air Quality Control Region. The Metropolitan Cheyenne Intrastate Air Quality Control Region (Wyoming) consists of the territorial area...

  2. 40 CFR 81.62 - Northeast Mississippi Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.62 Section 81.62 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.62 Northeast Mississippi Intrastate Air Quality Control Region. The Alabama-Mississippi-Tennessee Interstate Air Quality Control Region has been renamed the Northeast...

  3. 40 CFR 81.78 - Metropolitan Portland Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.78 Section 81.78 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.78 Metropolitan Portland Intrastate Air Quality Control Region. The Metropolitan Portland Intrastate Air Quality Control Region (Maine) consists of the territorial area...

  4. Use of Commercial FPGA-Based Evaluation Boards for Single-Event Testing of DDR2 and DDR3 SDRAMs

    NASA Technical Reports Server (NTRS)

    Ladbury, R. L.; Berg, M. D.; Wilcox, E. P.; LaBel, K. A.; Kim, H. S.; Phan, A. M.; Seidleck, C. M.

    2013-01-01

    We investigate the use of commercial FPGA based evaluation boards for radiation testing DDR2 and DDR3 SDRAMs. We evaluate the resulting data quality and the tradeoffs involved in the use of these boards.

  5. 40 CFR 81.77 - Puerto Rico Air Quality Control Region.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 18 2014-07-01 2014-07-01 false Puerto Rico Air Quality Control Region... Control Regions § 81.77 Puerto Rico Air Quality Control Region. The Puerto Rico Air Quality Control Region... delimited): The entire Commonwealth of Puerto Rico: Puerto Rico and surrounding islands, Vieques and...

  6. HPLC for quality control of polyimides

    NASA Technical Reports Server (NTRS)

    Young, P. R.; Sykes, G. F.

    1979-01-01

    High Pressure Liquid Chromatography (HPLC) as a quality control tool for polyimide resins and prepregs are presented. A data base to help establish accept/reject criteria for these materials was developed. This work is intended to supplement, not replace, standard quality control tests normally conducted on incoming resins and prepregs. To help achieve these objectives, the HPLC separation of LARC-160 polyimide precursor resin was characterized. Room temperature resin aging effects were studied. Graphite reinforced composites made from fresh and aged resin were fabricated and tested to determine if changes observed by HPLC were significant.

  7. Development of an Adjustable board and a Rotational Board for Scaffold

    NASA Astrophysics Data System (ADS)

    Jang, Myunghoun

    2017-06-01

    Scaffold is widely used in high work-places inside and outside of a building construction site. It is inexpensive and is installed and dismantled easily. Although standards and ledgers of a steel tube and coupler scaffold are installed in a regular distance, the distances of transoms are not equal in some places. Sometimes a working platform or a board is absent in the corner of scaffold. This may cause safety accidents because a foothold is not stable on the transoms. An adjustable safety board and a rotational safety board are suggested in this paper. The adjustable board consists of two footholds. The small one is inserted into the large one. The rotational board covers not only right angle but also acute or obtuse angles. These safety boards for scaffold help to decrease safety accidents in construction sites.

  8. COMMUNITY MULTISCALE AIR QUALITY ( CMAQ ) MODEL - QUALITY ASSURANCE AND VERSION CONTROL

    EPA Science Inventory

    This presentation will be given to the EPA Exposure Modeling Workgroup on January 24, 2006. The quality assurance and version control procedures for the Community Multiscale Air Quality (CMAQ) Model are presented. A brief background of CMAQ is given, then issues related to qual...

  9. Nuclear Technology Series. Course 14: Introduction to Quality Assurance/Quality Control.

    ERIC Educational Resources Information Center

    Technical Education Research Center, Waco, TX.

    This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

  10. Implementing self sustained quality control procedures in a clinical laboratory.

    PubMed

    Khatri, Roshan; K C, Sanjay; Shrestha, Prabodh; Sinha, J N

    2013-01-01

    Quality control is an essential component in every clinical laboratory which maintains the excellence of laboratory standards, supplementing to proper disease diagnosis, patient care and resulting in overall strengthening of health care system. Numerous quality control schemes are available, with combinations of procedures, most of which are tedious, time consuming and can be "too technical" whereas commercially available quality control materials can be expensive especially for laboratories in developing nations like Nepal. Here, we present a procedure performed at our centre with self prepared control serum and use of simple statistical tools for quality assurance. The pooled serum was prepared as per guidelines for preparation of stabilized liquid quality control serum from human sera. Internal Quality Assessment was performed on this sample, on a daily basis which included measurement of 12 routine biochemical parameters. The results were plotted on Levey-Jennings charts and analysed with quality control rules, for a period of one month. The mean levels of biochemical analytes in self prepared control serum were within normal physiological range. This serum was evaluated every day along with patients' samples. The results obtained were plotted on control charts and analysed using common quality control rules to identify possible systematic and random errors. Immediate mitigation measures were taken and the dispatch of erroneous reports was avoided. In this study we try to highlight on a simple internal quality control procedure which can be performed by laboratories, with minimum technology, expenditure, and expertise and improve reliability and validity of the test reports.

  11. Assisting People with Multiple Disabilities Actively Correct Abnormal Standing Posture with a Nintendo Wii Balance Board through Controlling Environmental Stimulation

    ERIC Educational Resources Information Center

    Shih, Ching-Hsiang; Shih, Ching-Tien; Chu, Chiung-Ling

    2010-01-01

    The latest researches adopted software technology turning the Nintendo Wii Balance Board into a high performance change of standing posture (CSP) detector, and assessed whether two persons with multiple disabilities would be able to control environmental stimulation using body swing (changing standing posture). This study extends Wii Balance Board…

  12. 40 CFR 81.118 - Southwest Missouri Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.118 Section 81.118 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.118 Southwest Missouri Intrastate Air Quality Control Region. The Southwest Missouri Intrastate Air Quality Control Region consists of the territorial area encompassed by the...

  13. 40 CFR 81.116 - Northern Missouri Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.116 Section 81.116 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.116 Northern Missouri Intrastate Air Quality Control Region. The Northern Missouri Intrastate Air Quality Control Region consists of the territorial area encompassed by the...

  14. 40 CFR 81.97 - Southwest Florida Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.97 Section 81.97 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.97 Southwest Florida Intrastate Air Quality Control Region. The Southwest Florida Intrastate Air Quality Control Region consists of the territorial area encompassed by the...

  15. 40 CFR 81.117 - Southeast Missouri Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.117 Section 81.117 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.117 Southeast Missouri Intrastate Air Quality Control Region. The Southeast Missouri Intrastate Air Quality Control Region consists of the territorial area encompassed by the...

  16. 40 CFR 81.98 - Burlington-Keokuk Interstate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.98 Section 81.98 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.98 Burlington-Keokuk Interstate Air Quality Control Region. The Burlington-Keokuk Interstate Air Quality Control Region (Illinois-Iowa) is revised to consist of the...

  17. 40 CFR 81.118 - Southwest Missouri Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.118 Section 81.118 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.118 Southwest Missouri Intrastate Air Quality Control Region. The Southwest Missouri Intrastate Air Quality Control Region consists of the territorial area encompassed by the...

  18. 40 CFR 81.115 - Northwest Nevada Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.115 Section 81.115 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.115 Northwest Nevada Intrastate Air Quality Control Region. The Northwest Nevada Intrastate Air Quality Control Region consists of the territorial area encompassed by the...

  19. 40 CFR 81.116 - Northern Missouri Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.116 Section 81.116 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.116 Northern Missouri Intrastate Air Quality Control Region. The Northern Missouri Intrastate Air Quality Control Region consists of the territorial area encompassed by the...

  20. 40 CFR 81.123 - Southeastern Oklahoma Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.123 Section 81.123 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.123 Southeastern Oklahoma Intrastate Air Quality Control Region. The Southeastern Oklahoma Intrastate Air Quality Control Region consists of the territorial area encompassed by the...

  1. 40 CFR 81.67 - Lake Michigan Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Regions § 81.67 Lake Michigan Intrastate Air Quality Control Region. The Menominee-Escanaba (Michigan)-Marinette (Wisconsin) Interstate Air Quality Control Region has been renamed the Lake Michigan Intrastate Air Quality Control Region (Wisconsin) and revised to consist of the territorial area...

  2. 40 CFR 81.115 - Northwest Nevada Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.115 Section 81.115 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.115 Northwest Nevada Intrastate Air Quality Control Region. The Northwest Nevada Intrastate Air Quality Control Region consists of the territorial area encompassed by the...

  3. 40 CFR 81.97 - Southwest Florida Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Region. 81.97 Section 81.97 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.97 Southwest Florida Intrastate Air Quality Control Region. The Southwest Florida Intrastate Air Quality Control Region consists of the territorial area encompassed by the...

  4. 40 CFR 81.117 - Southeast Missouri Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.117 Section 81.117 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.117 Southeast Missouri Intrastate Air Quality Control Region. The Southeast Missouri Intrastate Air Quality Control Region consists of the territorial area encompassed by the...

  5. 40 CFR 81.122 - Mississippi Delta Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.122 Section 81.122 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.122 Mississippi Delta Intrastate Air Quality Control Region. The Mississippi Delta Intrastate Air Quality Control Region consists of the territorial area encompassed by the...

  6. 40 CFR 81.98 - Burlington-Keokuk Interstate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Quality Control Region. 81.98 Section 81.98 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.98 Burlington-Keokuk Interstate Air Quality Control Region. The Burlington-Keokuk Interstate Air Quality Control Region (Illinois-Iowa) is revised to consist of the...

  7. A wireless object location detector enabling people with developmental disabilities to control environmental stimulation through simple occupational activities with Nintendo Wii Balance Boards.

    PubMed

    Shih, Ching-Hsiang; Chang, Man-Ling

    2012-01-01

    The latest researches have adopted software technology, turning the Nintendo Wii Balance Board into a high performance standing location detector with a newly developed standing location detection program (SLDP). This study extended SLDP functionality to assess whether two people with developmental disabilities would be able to actively perform simple occupational activities by controlling their favorite environmental stimulation using Nintendo Wii Balance Boards and SLDP software. An ABAB design was adopted in this study to perform the tests. The test results showed that, during the intervention phases, both participants significantly increased their target response (i.e. simple occupational activity) to activate the control system to produce environmental stimulation. The practical and developmental implications of the findings are discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

  8. The Short, Productive Board Meeting

    ERIC Educational Resources Information Center

    McAdams, Donald R.

    2005-01-01

    Board meetings are the time and place where school boards act. In fact, only when coming together as a body in a legal meeting do school board members become a board. Effective board meetings are the first prerequisite for an effective board. Furthermore, what parents and voters see at board meetings determines largely what they think about their…

  9. 20 CFR 602.41 - Proper expenditure of Quality Control granted funds.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Proper expenditure of Quality Control granted... LABOR QUALITY CONTROL IN THE FEDERAL-STATE UNEMPLOYMENT INSURANCE SYSTEM Quality Control Grants to States § 602.41 Proper expenditure of Quality Control granted funds. The Secretary may, after reasonable...

  10. 20 CFR 602.41 - Proper expenditure of Quality Control granted funds.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Proper expenditure of Quality Control granted... LABOR QUALITY CONTROL IN THE FEDERAL-STATE UNEMPLOYMENT INSURANCE SYSTEM Quality Control Grants to States § 602.41 Proper expenditure of Quality Control granted funds. The Secretary may, after reasonable...

  11. Japanese Quality Control Circles.

    ERIC Educational Resources Information Center

    Nishiyama, Kazuo

    In recent years, United States scholars with an interest in international business and organizational communication have begun to notice the success of Japanese "quality control circles." These are small groups, usually composed of seven to ten workers, who are organized at the production levels within most large Japanese factories. A…

  12. 14 CFR 21.143 - Quality control data requirements; prime manufacturer.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Quality control data requirements; prime... describing assigned responsibilities and delegated authority of the quality control organization, together with a chart indicating the functional relationship of the quality control organization to management...

  13. 40 CFR 81.51 - Portland Interstate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Control Region. 81.51 Section 81.51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.51 Portland Interstate Air Quality Control Region. The Portland Interstate...

  14. 40 CFR 81.51 - Portland Interstate Air Quality Control Region.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Control Region. 81.51 Section 81.51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.51 Portland Interstate Air Quality Control Region. The Portland Interstate...

  15. 40 CFR 81.51 - Portland Interstate Air Quality Control Region.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Control Region. 81.51 Section 81.51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.51 Portland Interstate Air Quality Control Region. The Portland Interstate...

  16. Becoming a Better Board Member. A Guide to Effective School Board Service.

    ERIC Educational Resources Information Center

    National School Boards Association, Washington, DC.

    This guide to effective school board service is a "how-to" manual for school board members. The objective of the book is to condense the time board members need to become more effective school leaders, but it also contains information and advice intended to be helpful to experienced board members. Consisting of 17 chapters, the book is…

  17. 30 CFR 28.32 - Proposed quality control plans; approval by MSHA.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Proposed quality control plans; approval by...-CIRCUIT PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.32 Proposed quality control plans; approval by MSHA. (a) Each proposed quality control plan submitted in accordance with this...

  18. 30 CFR 28.32 - Proposed quality control plans; approval by MSHA.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-CIRCUIT PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.32 Proposed quality control plans; approval by MSHA. (a) Each proposed quality control plan submitted in accordance with this... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Proposed quality control plans; approval by...

  19. 30 CFR 28.32 - Proposed quality control plans; approval by MSHA.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-CIRCUIT PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.32 Proposed quality control plans; approval by MSHA. (a) Each proposed quality control plan submitted in accordance with this... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Proposed quality control plans; approval by...

  20. 30 CFR 28.32 - Proposed quality control plans; approval by MSHA.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-CIRCUIT PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.32 Proposed quality control plans; approval by MSHA. (a) Each proposed quality control plan submitted in accordance with this... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Proposed quality control plans; approval by...

  1. CRN5EXP: Expert system for statistical quality control

    NASA Technical Reports Server (NTRS)

    Hentea, Mariana

    1991-01-01

    The purpose of the Expert System CRN5EXP is to assist in checking the quality of the coils at two very important mills: Hot Rolling and Cold Rolling in a steel plant. The system interprets the statistical quality control charts, diagnoses and predicts the quality of the steel. Measurements of process control variables are recorded in a database and sample statistics such as the mean and the range are computed and plotted on a control chart. The chart is analyzed through patterns using the C Language Integrated Production System (CLIPS) and a forward chaining technique to reach a conclusion about the causes of defects and to take management measures for the improvement of the quality control techniques. The Expert System combines the certainty factors associated with the process control variables to predict the quality of the steel. The paper presents the approach to extract data from the database, the reason to combine certainty factors, the architecture and the use of the Expert System. However, the interpretation of control charts patterns requires the human expert's knowledge and lends to Expert Systems rules.

  2. Advanced Image Search: A Strategy for Creating Presentation Boards

    ERIC Educational Resources Information Center

    Frey, Diane K.; Hines, Jean D.; Swinker, Mary E.

    2008-01-01

    Finding relevant digital images to create presentation boards requires advanced search skills. This article describes a course assignment involving a technique designed to develop students' literacy skills with respect to locating images of desired quality and content from Internet databases. The assignment was applied in a collegiate apparel…

  3. 22 CFR 96.39 - Information disclosure and quality control practices.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Information disclosure and quality control... for Convention Accreditation and Approval Information Disclosure, Fee Practices, and Quality Control Policies and Practices § 96.39 Information disclosure and quality control practices. (a) The agency or...

  4. 22 CFR 96.39 - Information disclosure and quality control practices.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Information disclosure and quality control... for Convention Accreditation and Approval Information Disclosure, Fee Practices, and Quality Control Policies and Practices § 96.39 Information disclosure and quality control practices. (a) The agency or...

  5. 22 CFR 96.39 - Information disclosure and quality control practices.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Information disclosure and quality control... for Convention Accreditation and Approval Information Disclosure, Fee Practices, and Quality Control Policies and Practices § 96.39 Information disclosure and quality control practices. (a) The agency or...

  6. 22 CFR 96.39 - Information disclosure and quality control practices.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Information disclosure and quality control... for Convention Accreditation and Approval Information Disclosure, Fee Practices, and Quality Control Policies and Practices § 96.39 Information disclosure and quality control practices. (a) The agency or...

  7. 22 CFR 96.39 - Information disclosure and quality control practices.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Information disclosure and quality control... for Convention Accreditation and Approval Information Disclosure, Fee Practices, and Quality Control Policies and Practices § 96.39 Information disclosure and quality control practices. (a) The agency or...

  8. Tethered Satellite System Contingency Investigation Board

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The Tethered Satellite System (TSS-1) was launched aboard the Space Shuttle Atlantis (STS-46) on July 31, 1992. During the attempted on-orbit operations, the Tethered Satellite System failed to deploy successfully beyond 256 meters. The satellite was retrieved successfully and was returned on August 6, 1992. The National Aeronautics and Space Administration (NASA) Associate Administrator for Space Flight formed the Tethered Satellite System (TSS-1) Contingency Investigation Board on August 12, 1992. The TSS-1 Contingency Investigation Board was asked to review the anomalies which occurred, to determine the probable cause, and to recommend corrective measures to prevent recurrence. The board was supported by the TSS Systems Working group as identified in MSFC-TSS-11-90, 'Tethered Satellite System (TSS) Contingency Plan'. The board identified five anomalies for investigation: initial failure to retract the U2 umbilical; initial failure to flyaway; unplanned tether deployment stop at 179 meters; unplanned tether deployment stop at 256 meters; and failure to move tether in either direction at 224 meters. Initial observations of the returned flight hardware revealed evidence of mechanical interference by a bolt with the level wind mechanism travel as well as a helical shaped wrap of tether which indicated that the tether had been unwound from the reel beyond the travel by the level wind mechanism. Examination of the detailed mission events from flight data and mission logs related to the initial failure to flyaway and the failure to move in either direction at 224 meters, together with known preflight concerns regarding slack tether, focused the assessment of these anomalies on the upper tether control mechanism. After the second meeting, the board requested the working group to complete and validate a detailed integrated mission sequence to focus the fault tree analysis on a stuck U2 umbilical, level wind mechanical interference, and slack tether in upper tether

  9. Tethered Satellite System Contingency Investigation Board

    NASA Astrophysics Data System (ADS)

    1992-11-01

    The Tethered Satellite System (TSS-1) was launched aboard the Space Shuttle Atlantis (STS-46) on July 31, 1992. During the attempted on-orbit operations, the Tethered Satellite System failed to deploy successfully beyond 256 meters. The satellite was retrieved successfully and was returned on August 6, 1992. The National Aeronautics and Space Administration (NASA) Associate Administrator for Space Flight formed the Tethered Satellite System (TSS-1) Contingency Investigation Board on August 12, 1992. The TSS-1 Contingency Investigation Board was asked to review the anomalies which occurred, to determine the probable cause, and to recommend corrective measures to prevent recurrence. The board was supported by the TSS Systems Working group as identified in MSFC-TSS-11-90, 'Tethered Satellite System (TSS) Contingency Plan'. The board identified five anomalies for investigation: initial failure to retract the U2 umbilical; initial failure to flyaway; unplanned tether deployment stop at 179 meters; unplanned tether deployment stop at 256 meters; and failure to move tether in either direction at 224 meters. Initial observations of the returned flight hardware revealed evidence of mechanical interference by a bolt with the level wind mechanism travel as well as a helical shaped wrap of tether which indicated that the tether had been unwound from the reel beyond the travel by the level wind mechanism. Examination of the detailed mission events from flight data and mission logs related to the initial failure to flyaway and the failure to move in either direction at 224 meters, together with known preflight concerns regarding slack tether, focused the assessment of these anomalies on the upper tether control mechanism. After the second meeting, the board requested the working group to complete and validate a detailed integrated mission sequence to focus the fault tree analysis on a stuck U2 umbilical, level wind mechanical interference, and slack tether in upper tether

  10. Quality control and quality assurance of hot mix asphalt construction in Delaware.

    DOT National Transportation Integrated Search

    2006-07-01

    Since the mid 60s the Federal Highway Administration began to encourage : Departments of Transportation and Contractors toward the use of quality control and : quality assurance (QA/QC) specifications, which are statistically based. : For example,...

  11. Ocean Data Quality Control

    DTIC Science & Technology

    2011-11-18

    the aero- sol at the coincident time and location of the satellite SST retrievals. This informa- tion is available in the daytime for the anti-solar...are of the same form, such as probabilities or standard normal deviates. A quality control decision-making algorithm in use at the U.S. Navy oceano

  12. Establishing end-of-life boards for palliative care of patients with advanced diseases.

    PubMed

    Masel, Eva K; Unseld, Matthias; Adamidis, Feroniki; Roider-Schur, Sophie; Watzke, Herbert H

    2018-04-01

    Interdisciplinary tumor board decisions improve the quality of oncological therapies, while no such boards exist for end-of-life (EOL) decisions. The aim of this study was to assess the willingness of hemato-oncological and palliative care professionals to develop and participate in EOL boards. An aim of an EOL board would be to establish an interdisciplinary and comprehensive care for the remaining lifetime of patients suffering from advanced incurable diseases. Staff from the interdisciplinary teams of all hemato-oncological and palliative care wards in Vienna were invited to anonymously participate in an online survey. 309 professionals responded. 91% respondents reported a need to establish an EOL board, 63% expressed their willingness to actively participate in an EOL board, and 25% were indecisive. Regarding patient presence, 50% voted for an EOL board in the presence of the patients, and 36% voted for an EOL board in the absence of the patients. 95% had the opinion that an EOL board could improve patient care in the last phase of life. 64% stated that the development of an EOL board would be worthwhile, while 28% did not see enough resources available at their institutions. Regarding the desired type of documentation, 61% voted for a centrally available EOL decision, and 31% supported an in-house-based documentation. 94% voted for the availability of an information folder about EOL care. The willingness of professionals to establish an EOL board was very high. Further steps should be taken to implement such boards to improve EOL care.

  13. The Vanishing School Board.

    ERIC Educational Resources Information Center

    Chalker, Donald M.; Haynes, Richard M.

    1997-01-01

    Now that school boards have been replaced by parent advisory councils, there is virtually no local school governance in New Brunswick, Canada. Factors leading to school boards' demise include neglected democratic institutions, failure to understand local boards' needs, less qualified members, boards' failure to protect their special…

  14. Quality Controlling CMIP datasets at GFDL

    NASA Astrophysics Data System (ADS)

    Horowitz, L. W.; Radhakrishnan, A.; Balaji, V.; Adcroft, A.; Krasting, J. P.; Nikonov, S.; Mason, E. E.; Schweitzer, R.; Nadeau, D.

    2017-12-01

    As GFDL makes the switch from model development to production in light of the Climate Model Intercomparison Project (CMIP), GFDL's efforts are shifted to testing and more importantly establishing guidelines and protocols for Quality Controlling and semi-automated data publishing. Every CMIP cycle introduces key challenges and the upcoming CMIP6 is no exception. The new CMIP experimental design comprises of multiple MIPs facilitating research in different focus areas. This paradigm has implications not only for the groups that develop the models and conduct the runs, but also for the groups that monitor, analyze and quality control the datasets before data publishing, before their knowledge makes its way into reports like the IPCC (Intergovernmental Panel on Climate Change) Assessment Reports. In this talk, we discuss some of the paths taken at GFDL to quality control the CMIP-ready datasets including: Jupyter notebooks, PrePARE, LAMP (Linux, Apache, MySQL, PHP/Python/Perl): technology-driven tracker system to monitor the status of experiments qualitatively and quantitatively, provide additional metadata and analysis services along with some in-built controlled-vocabulary validations in the workflow. In addition to this, we also discuss the integration of community-based model evaluation software (ESMValTool, PCMDI Metrics Package, and ILAMB) as part of our CMIP6 workflow.

  15. A new standing posture detector to enable people with multiple disabilities to control environmental stimulation by changing their standing posture through a commercial Wii Balance Board.

    PubMed

    Shih, Ching-Hsiang; Shih, Ching-Tien; Chiang, Ming-Shan

    2010-01-01

    This study assessed whether two persons with multiple disabilities would be able to control environmental stimulation using body swing (changing standing posture) and a Wii Balance Board with a newly developed standing posture detection program (i.e. a new software program turns a Wii Balance Board into a precise standing posture detector). The study was performed according to an ABAB design, in which A represented baseline and B represented intervention phases. Both participants significantly increased their target response (body swing) to activate the control system to produce environmental stimulation during the intervention phases. Practical and developmental implications of the findings were discussed.

  16. 40 CFR 81.76 - State of Hawaii Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 17 2011-07-01 2011-07-01 false State of Hawaii Air Quality Control... PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.76 State of Hawaii Air Quality Control Region. The State of Hawaii Air Quality...

  17. 40 CFR 81.76 - State of Hawaii Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 17 2010-07-01 2010-07-01 false State of Hawaii Air Quality Control... PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.76 State of Hawaii Air Quality Control Region. The State of Hawaii Air Quality...

  18. 40 CFR 81.76 - State of Hawaii Air Quality Control Region.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 18 2012-07-01 2012-07-01 false State of Hawaii Air Quality Control... PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.76 State of Hawaii Air Quality Control Region. The State of Hawaii Air Quality...

  19. 40 CFR 81.76 - State of Hawaii Air Quality Control Region.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 18 2013-07-01 2013-07-01 false State of Hawaii Air Quality Control... PROGRAMS (CONTINUED) DESIGNATION OF AREAS FOR AIR QUALITY PLANNING PURPOSES Designation of Air Quality Control Regions § 81.76 State of Hawaii Air Quality Control Region. The State of Hawaii Air Quality...

  20. A multichannel amplitude and relative-phase controller for active sound quality control

    NASA Astrophysics Data System (ADS)

    Mosquera-Sánchez, Jaime A.; Desmet, Wim; de Oliveira, Leopoldo P. R.

    2017-05-01

    The enhancement of the sound quality of periodic disturbances for a number of listeners within an enclosure often confronts difficulties given by cross-channel interferences, which arise from simultaneously profiling the primary sound at each error sensor. These interferences may deteriorate the original sound among each listener, which is an unacceptable result from the point of view of sound quality control. In this paper we provide experimental evidence on controlling both amplitude and relative-phase functions of stationary complex primary sounds for a number of listeners within a cavity, attaining amplifications of twice the original value, reductions on the order of 70 dB, and relative-phase shifts between ± π rad, still in a free-of-interference control scenario. To accomplish such burdensome control targets, we have designed a multichannel active sound profiling scheme that bases its operation on exchanging time-domain control signals among the control units during uptime. Provided the real parts of the eigenvalues of persistently excited control matrices are positive, the proposed multichannel array is able to counterbalance cross-channel interferences, while attaining demanding control targets. Moreover, regularization of unstable control matrices is not seen to prevent the proposed array to provide free-of-interference amplitude and relative-phase control, but the system performance is degraded, as a function of the amount of regularization needed. The assessment of Loudness and Roughness metrics on the controlled primary sound proves that the proposed distributed control scheme noticeably outperforms current techniques, since active amplitude- and/or relative-phase-based enhancement of the auditory qualities of a primary sound no longer implies in causing interferences among different positions. In this regard, experimental results also confirm the effectiveness of the proposed scheme on stably enhancing the sound qualities of periodic sounds for